WorldWideScience

Sample records for replacement tooth production

  1. Replacing a Missing Tooth

    Science.gov (United States)

    ... vessels in the tooth pulps are rather large. Drilling down these teeth for crowns may expose the ... porcelain replacement tooth is held in place by metal extensions cemented to the backs of the adjacent ...

  2. Autogenous tooth transplantation for replacing a lost tooth: case reports

    OpenAIRE

    Kang, Ji-Youn; Chang, Hoon-Sang; Hwang,Yun-Chan; Hwang, In-Nam; Oh, Won-Mann; LEE, Bin-Na

    2013-01-01

    The autogenous tooth transplantation is an alternative treatment replacing a missing tooth when a suitable donor tooth is available. It is also a successful treatment option to save significant amount of time and cost comparing implants or conventional prosthetics. These cases, which required single tooth extraction due to deep caries and severe periodontal disease, could have good results by transplanting non-functional but sound donor tooth to the extraction site.

  3. Biology of tooth replacement in amniotes

    Institute of Scientific and Technical Information of China (English)

    John A Whitlock; Joy M Richman

    2013-01-01

    Tooth replacement is a common trait to most vertebrates, including mammals. Mammals, however, have lost the capacity for continuous tooth renewal seen in most other vertebrates, and typically have only 1–2 generations of teeth. Here, we review the mechanisms of tooth replacement in reptiles and mammals, and discuss in detail the current and historical theories on control of timing and pattern of tooth replacement and development.

  4. Autogenous tooth transplantation: an alternative to replace extracted tooth

    Directory of Open Access Journals (Sweden)

    David B. Kamadjaja

    2015-09-01

    Full Text Available Background: The gold standard treatment to replace missing tooth is dental implants, however, in certain cases, such as in young patients its placement is contraindicated. Autogenous tooth transplantation, which has been widely done in Scandinavian countries for many years, may become a good alternative to overcome this problem. Purpose: This article attempted to provide information about the indication, treatment planning, surgical technique and the successful result of autogenous tooth transplantation. Case: A fifteen year old male patient presented with large caries and periapical disease of his lower left first molar, which was partially erupted and the roots was not fully formed in radiograph. Case management: Autogenous tooth transplantation procedure was performed consisting of extraction of #36, odontectomy of #38 followed by its implantation to socket #36 and fixation of the transplanted tooth to the adjacent teeth. Post operative evaluation was done on regular basis within 18 months period. There was no complaint, the tooth was clinically stable and no evidence of periodontal problem. Serial radiographs showed healing of alveolar bone and periodontal tissue, and the complete root formation was evident by 18 months post operatively. Conclusion: Autogenous tooth transplantation is a potential alternative to replace extracted tooth. Provided that the case be properly planned and operation carefully performed, successful result of this treatment can be achieved.

  5. Autogenous Transplantation for Replacing a Hopeless Tooth

    Science.gov (United States)

    Zakershahrak, Mehrsa; Moshari, Amirabbas; Vatanpour, Mehdi; Khalilak, Zohreh; Jalali Ara, Afsoon

    2017-01-01

    Autogenous tooth transplantation (ATT) is a simple and reasonable choice for replacing the missing teeth when a proper donor tooth is available. This report presents a case of successful ATT of a maxillary right third molar for replacement of mandibular right second molar with a concomitant endodontic-periodontal disease. The mandibular second molar was believed to be hopeless due to a severe damage to coronal tooth structure, inappropriate root canal treatment and apical radiolucency. After extraction of mandibular second molar and maxillary third molar (the donor), the tooth was re-implanted into the extracted socket of second molar site. Root canal therapy was then performed. After 3 years, clinical and radiographic examinations revealed satisfying results, with no signs and symptoms. The patient is asymptomatic and the transplanted tooth is still functional with no signs of marginal periodontal pathosis. Radiographies showed bone regeneration in the site of previous extensive periapical lesion, normal periodontal ligament with no signs of root resorption. PMID:28179939

  6. Functional tooth regenerative therapy: tooth tissue regeneration and whole-tooth replacement.

    Science.gov (United States)

    Oshima, Masamitsu; Tsuji, Takashi

    2014-07-01

    Oral and general health is compromised by irreversible dental problems, including dental caries, periodontal disease and tooth injury. Regenerative therapy for tooth tissue repair and whole-tooth replacement is currently considered a novel therapeutic concept with the potential for the full recovery of tooth function. Several types of stem cells and cell-activating cytokines have been identified in oral tissues. These cells are thought to be candidate cell sources for tooth tissue regenerative therapies because they have the ability to differentiate into tooth tissues in vitro and in vivo. Whole-tooth replacement therapy is regarded as an important model for the development of an organ regenerative concept. A novel three-dimensional cell-manipulation method, designated the organ germ method, has been developed to recapitulate organogenesis. This method involves compartmentalisation of epithelial and mesenchymal cells at a high cell density to mimic multicellular assembly conditions and epithelial-mesenchymal interactions. A bioengineered tooth germ can generate a structurally correct tooth in vitro and erupt successfully with the correct tooth structure when transplanted into the oral cavity. We have ectopically generated a bioengineered tooth unit composed of a mature tooth, periodontal ligament and alveolar bone, and that tooth unit was successfully engrafted into an adult jawbone through bone integration. Such bioengineered teeth were able to perform normal physiological tooth functions, such as developing a masticatory potential in response to mechanical stress and a perceptive potential for noxious stimuli. In this review, we describe recent findings and technologies underpinning tooth regenerative therapy.

  7. Evolution of high tooth replacement rates in sauropod dinosaurs.

    Directory of Open Access Journals (Sweden)

    Michael D D'Emic

    Full Text Available BACKGROUND: Tooth replacement rate can be calculated in extinct animals by counting incremental lines of deposition in tooth dentin. Calculating this rate in several taxa allows for the study of the evolution of tooth replacement rate. Sauropod dinosaurs, the largest terrestrial animals that ever evolved, exhibited a diversity of tooth sizes and shapes, but little is known about their tooth replacement rates. METHODOLOGY/PRINCIPAL FINDINGS: We present tooth replacement rate, formation time, crown volume, total dentition volume, and enamel thickness for two coexisting but distantly related and morphologically disparate sauropod dinosaurs Camarasaurus and Diplodocus. Individual tooth formation time was determined by counting daily incremental lines in dentin. Tooth replacement rate is calculated as the difference between the number of days recorded in successive replacement teeth. Each tooth family in Camarasaurus has a maximum of three replacement teeth, whereas each Diplodocus tooth family has up to five. Tooth formation times are about 1.7 times longer in Camarasaurus than in Diplodocus (315 vs. 185 days. Average tooth replacement rate in Camarasaurus is about one tooth every 62 days versus about one tooth every 35 days in Diplodocus. Despite slower tooth replacement rates in Camarasaurus, the volumetric rate of Camarasaurus tooth replacement is 10 times faster than in Diplodocus because of its substantially greater tooth volumes. A novel method to estimate replacement rate was developed and applied to several other sauropodomorphs that we were not able to thin section. CONCLUSIONS/SIGNIFICANCE: Differences in tooth replacement rate among sauropodomorphs likely reflect disparate feeding strategies and/or food choices, which would have facilitated the coexistence of these gigantic herbivores in one ecosystem. Early neosauropods are characterized by high tooth replacement rates (despite their large tooth size, and derived titanosaurs and

  8. DENTAL IMPLANTS: AS AN ALTERNATIVE FOR TOOTH REPLACEMENT

    OpenAIRE

    Banerjee Nandini; Singh Sushma

    2013-01-01

    A dental implant is an artificial tooth that replaces a tooth that has been taken out. Implants are natural-looking, can provide support for dentures and do not affect the teeth bordering them. They are as stable as your real teeth and protect you from the loss of jawbone, which occurs when you lose teeth. Endosseous dental implants have revolutionized the fields of implants and periodontics. During the last decade, a great deal of information has been generated concerning the effectiveness a...

  9. Functional tooth regeneration using a bioengineered tooth unit as a mature organ replacement regenerative therapy.

    Science.gov (United States)

    Oshima, Masamitsu; Mizuno, Mitsumasa; Imamura, Aya; Ogawa, Miho; Yasukawa, Masato; Yamazaki, Hiromichi; Morita, Ritsuko; Ikeda, Etsuko; Nakao, Kazuhisa; Takano-Yamamoto, Teruko; Kasugai, Shohei; Saito, Masahiro; Tsuji, Takashi

    2011-01-01

    Donor organ transplantation is currently an essential therapeutic approach to the replacement of a dysfunctional organ as a result of disease, injury or aging in vivo. Recent progress in the area of regenerative therapy has the potential to lead to bioengineered mature organ replacement in the future. In this proof of concept study, we here report a further development in this regard in which a bioengineered tooth unit comprising mature tooth, periodontal ligament and alveolar bone, was successfully transplanted into a properly-sized bony hole in the alveolar bone through bone integration by recipient bone remodeling in a murine transplantation model system. The bioengineered tooth unit restored enough the alveolar bone in a vertical direction into an extensive bone defect of murine lower jaw. Engrafted bioengineered tooth displayed physiological tooth functions such as mastication, periodontal ligament function for bone remodeling and responsiveness to noxious stimulations. This study thus represents a substantial advance and demonstrates the real potential for bioengineered mature organ replacement as a next generation regenerative therapy.

  10. Product Platform Replacements

    DEFF Research Database (Denmark)

    Sköld, Martin; Karlsson, Christer

    2012-01-01

    Purpose – It is argued in this article that too little is known about product platforms and how to deal with them from a manager's point of view. Specifically, little information exists regarding when old established platforms are replaced by new generations in R&D and production environments...... originality and value is achieved by focusing on product platform replacements believed to represent a growing management challenge....

  11. DENTAL IMPLANTS: AS AN ALTERNATIVE FOR TOOTH REPLACEMENT

    Directory of Open Access Journals (Sweden)

    Banerjee Nandini

    2013-08-01

    Full Text Available A dental implant is an artificial tooth that replaces a tooth that has been taken out. Implants are natural-looking, can provide support for dentures and do not affect the teeth bordering them. They are as stable as your real teeth and protect you from the loss of jawbone, which occurs when you lose teeth. Endosseous dental implants have revolutionized the fields of implants and periodontics. During the last decade, a great deal of information has been generated concerning the effectiveness and predictability of endosseous implants. Implant placement is a viable option in the treatment of partial and full edentulism and has become an integral facet of periodontal therapy. The available implants are remarkably successful. This review discusses the different aspects of dental implant including its advantages over the contemporary removable implants, its procedure in detail and the financial outlook of the same. The review also has a small consideration on minidental implant.

  12. Single-tooth replacement: factors affecting different prosthetic treatment modalities

    Directory of Open Access Journals (Sweden)

    Al-Quran Firas A

    2011-12-01

    Full Text Available Abstract Background The choice between several treatment options for replacing a single missing tooth is influenced by clinical, dentist- and patient-immanent factors. This study aimed to determine the patient factors that would affect the treatment decision to replace a single missing tooth and to assess the satisfaction with several options. Method 200 volunteers involved (121 females and 79 males divided into four groups, Group A: consisted of patients with conventional fixed partial dentures or patients with resin bonded fixed partial dentures. Group B: consisted of patients who received removable partial dentures while Group C: consisted of patients who received a single implant supported crown, and a control group D: consisted of patients who received no treatment. Data were collected using a questionnaire. Results The highest percentage of males within groups (58% was within the removable prostheses category. The majority of the subjects in the study reported that the main reason for replacing a missing tooth was for esthetic and function. Most important factor affecting the choice between treatment modalities was damaging the neighboring teeth. Pain, post operative sensitivity and dental phobia were important factors in choosing the prosthesis type and affected the control group patients not to have any treatment. The highest satisfaction percentage among groups studied was recorded for dental implants then FPD groups, while the least percentage were in both the control and RPD groups, for all aspects of function, esthetic and speech efficiency. Conclusions The final choice between FPD, RPD and implant depended on several factors which affected the decision making; among these is cost and patients' awareness of the different treatment options.

  13. Tooth regeneration: implications for the use of bioengineered organs in first-wave organ replacement.

    Science.gov (United States)

    Nakahara, Taka; Ide, Yoshiaki

    2007-08-01

    Experiments with animal models have shown that the tooth crown structure can be regenerated using tissue engineering techniques that combine tooth bud cells and biodegradable materials, or by using embryonic tissue and adult stem cells. Moreover, tooth roots and periodontal tissues have been reconstructed by grafting dental stem cells, which leads to the recovery of tooth function, suggesting that tooth regeneration will become possible in humans in the near future. The present article reviews current research on tooth regeneration, discusses a model of tooth replacement that could be used clinically, and proposes a new tooth regeneration approach that overcomes the difficulties associated with the tooth replacement model. Tooth regeneration is an important stepping stone in the establishment of engineered organ transplantation, which is one of the ultimate goals of regenerative therapies.

  14. An Innovative Rigid Tray Technique for Replacement and Reattachment of the Anterior Composite Tooth Pontic

    Directory of Open Access Journals (Sweden)

    Saied Mostafa Moazzami

    2014-06-01

    Full Text Available Replacement and reattachment of a newly detached composite tooth pontic is sometimes justified because of shape, color, function and patient satisfaction. The aim of this case report is to describe a new method using Rigid Tray Technique for exact replacement and reattachment of acceptable detached composite tooth pontic

  15. Complex patterns of tooth replacement revealed in the fruit bat (Eidolon helvum).

    Science.gov (United States)

    Popa, Elena M; Anthwal, Neal; Tucker, Abigail S

    2016-12-01

    How teeth are replaced during normal growth and development has long been an important question for comparative and developmental anatomy. Non-standard model animals have become increasingly popular in this field due to the fact that the canonical model laboratory mammal, the mouse, develops only one generation of teeth (monophyodonty), whereas the majority of mammals possess two generations of teeth (diphyodonty). Here we used the straw-coloured fruit bat (Eidolon helvum), an Old World megabat, which has two generations of teeth, in order to observe the development and replacement of tooth germs from initiation up to mineralization stages. Our morphological study uses 3D reconstruction of histological sections to uncover differing arrangements of the first and second-generation tooth germs during the process of tooth replacement. We show that both tooth germ generations develop as part of the dental lamina, with the first generation detaching from the lamina, leaving the free edge to give rise to a second generation. This separation was particularly marked at the third premolar locus, where the primary and replacement teeth become positioned side by side, unconnected by a lamina. The position of the replacement tooth, with respect to the primary tooth, varied within the mouth, with replacements forming posterior to or directly lingual to the primary tooth. Development of replacement teeth was arrested at some tooth positions and this appeared to be linked to the timing of tooth initiation and the subsequent rate of development. This study adds an additional species to the growing body of non-model species used in the study of tooth replacement, and offers a new insight into the development of the diphyodont condition. © 2016 Anatomical Society.

  16. Wnt signaling during tooth replacement in zebrafish (Danio rerio: pitfalls and perspectives

    Directory of Open Access Journals (Sweden)

    Ann eHuysseune

    2014-10-01

    Full Text Available The canonical (β-catenin dependent Wnt signaling pathway has emerged as a likely candidate for regulating tooth replacement in continuously renewing dentitions. So far, the involvement of canonical Wnt signaling has been experimentally demonstrated predominantly in amniotes. These studies tend to show stimulation of tooth formation by activation of the Wnt pathway, and inhibition of tooth formation when blocking the pathway. Here, we report a strong and dynamic expression of the soluble Wnt inhibitor dickkopf1 (dkk1 in developing zebrafish (Danio rerio tooth germs, suggesting an active repression of Wnt signaling during morphogenesis and cytodifferentiation of a tooth, and derepression of Wnt signaling during start of replacement tooth formation. To further analyse the role of Wnt signaling, we used different gain-of-function approaches. These yielded disjunct results, yet none of them indicating enhanced tooth replacement. Thus, masterblind (mbl mutants, defective in axin1, mimic overexpression of Wnt, but display a normally patterned dentition in which teeth are replaced at the appropriate times and positions. Activating the pathway with LiCl had variable outcomes, either resulting in the absence, or the delayed formation, of first-generation teeth, or yielding a regular dentition with normal replacement, but no supernumerary teeth or accelerated tooth replacement.The failure so far to influence tooth replacement in the zebrafish by perturbing Wnt signaling is discussed in the light of (i potential technical pitfalls related to dose- or time-dependency, (ii the complexity of the canonical Wnt pathway, and (iii species-specific differences in the nature and activity of pathway components. Finally, we emphasize the importance of in-depth knowledge of the wild-type pattern for reliable interpretations. It is hoped that our analysis can be inspiring to critically assess and elucidate the role of Wnt signaling in tooth development in polyphyodonts.

  17. Tooth replacement and putative odontogenic stem cell niches in pharyngeal dentition of medaka (Oryzias latipes).

    Science.gov (United States)

    Abduweli, Dawud; Baba, Otto; Tabata, Makoto J; Higuchi, Kazunori; Mitani, Hiroshi; Takano, Yoshiro

    2014-04-01

    The small-sized teleost fish medaka, Oryzias latipes, has as many as 1000 pharyngeal teeth undergoing continuous replacement. In this study, we sought to identify the tooth-forming units and determine its replacement cycles, and further localize odontogenic stem cell niches in the pharyngeal dentition of medaka to gain insights into the mechanisms whereby continuous tooth replacement is maintained. Three-dimensional reconstruction of pharyngeal epithelium and sequential fluorochrome labeling of pharyngeal bones and teeth indicated that the individual functional teeth and their successional teeth were organized in families, each comprising up to five generations of teeth and successional tooth germs, and that the replacement cycle of functional teeth was approximately 4 weeks. BrdU label/chase experiments confirmed the existence of clusters of label-retaining epithelial cells at the posterior end of each tooth family where the expression of pluripotency marker Sox2 was confirmed by in situ hybridization. Label-retaining cells were also identified in the mesoderm immediately adjacent to the posterior end of each tooth family. These data suggest the importance of existence of slow-cycling dental epithelial cells and Sox2 expressions at the posterior end of each tooth family to maintain continuous tooth formation and replacement in the pharyngeal dentition of medaka.

  18. Tooth replacement of tigerfish Hydrocynus vittatus from the Kruger National Park

    Directory of Open Access Journals (Sweden)

    C.L. Gagiano

    1996-01-01

    Full Text Available Evidence of tooth replacement was observed in 14 tigerfish which had been caught during the period 1991 - 1993 in the Olifants and Letaba rivers in the Kruger National Park. Replacement of teeth is a quick process (3-5 days and first replacement of adult coni- cal dentition takes place at six to seven months post hatch, at a body length of 100 mm (FL. Swollen gums are evident prior to tooth replacement and newly erupted teeth are loosely embedded in the gums. Tooth replacement occurs in both the upper and lower jaws simultaneously. It was observed in the laboratory that the feeding behaviour was affected when adult conical dentition was replaced in @ 287 mm (FL specimens.

  19. An evolutionary view on tooth development and replacement in wild Atlantic salmon (Salmo salar L.).

    Science.gov (United States)

    Huysseune, A; Witten, P E

    2008-01-01

    To gain an insight into the evolution of tooth replacement mechanisms, we studied the development of first-generation and replacement teeth on the dentary of wild Atlantic salmon (Salmo salar L.), a protacanthopterygian teleost, using serially sectioned heads of early posthatching stages as well as adults. First-generation teeth develop within the oral epithelium. The anlage of the replacement tooth is first seen as a placode-like thickening of the outer dental epithelium of the predecessor, at its lingual and caudal side. Ongoing development of the replacement tooth germ is characterized by the elaboration of a population of epithelial cells, termed here the middle dental epithelium, apposed to the inner dental epithelium on the lingual side of the tooth germ. Before the formation of the new successor, a single-layered outer dental epithelium segregates from the middle dental epithelium. The dental organs of the predecessor and the successor remain broadly interconnected. The absence of a discrete successional dental lamina in salmon stands in sharp contrast to what is observed in other teleosts, even those that share with salmon the extraosseous formation of replacement teeth. The mode of tooth replacement in Atlantic salmon displays several characters similar to those observed in the shark Squalus acanthias. To interpret similarities in tooth replacement between Atlantic salmon and chondrichthyans as a case of convergence, or to see them as a result of a heterochronic shift, requires knowledge on the replacement process in more basal actinopterygian lineages. The possibility that the middle dental epithelium functionally substitutes for a successional lamina, and could be a source of stem cells, whose descendants subsequently contribute to the placode of the new replacement tooth, needs to be explored.

  20. Autocrine and paracrine Shh signaling are necessary for tooth morphogenesis, but not tooth replacement in snakes and lizards (Squamata).

    Science.gov (United States)

    Handrigan, Gregory R; Richman, Joy M

    2010-01-01

    Here we study the role of Shh signaling in tooth morphogenesis and successional tooth initiation in snakes and lizards (Squamata). By characterizing the expression of Shh pathway receptor Ptc1 in the developing dentitions of three species (Eublepharis macularius, Python regius, and Pogona vitticeps) and by performing gain- and loss-of-function experiments, we demonstrate that Shh signaling is active in the squamate tooth bud and is required for its normal morphogenesis. Shh apparently mediates tooth morphogenesis by separate paracrine- and autocrine-mediated functions. According to this model, paracrine Shh signaling induces cell proliferation in the cervical loop, outer enamel epithelium, and dental papilla. Autocrine signaling within the stellate reticulum instead appears to regulate cell survival. By treating squamate dental explants with Hh antagonist cyclopamine, we induced tooth phenotypes that closely resemble the morphological and differentiation defects of vestigial, first-generation teeth in the bearded dragon P. vitticeps. Our finding that these vestigial teeth are deficient in epithelial Shh signaling further corroborates that Shh is needed for the normal development of teeth in snakes and lizards. Finally, in this study, we definitively refute a role for Shh signaling in successional dental lamina formation and conclude that other pathways regulate tooth replacement in squamates.

  1. Beta-Catenin and Plakoglobin Expression during Zebrafish Tooth Development and Replacement.

    Directory of Open Access Journals (Sweden)

    Barbara Verstraeten

    Full Text Available We analyzed the protein distribution of two cadherin-associated molecules, plakoglobin and β-catenin, during the different stages of tooth development and tooth replacement in zebrafish. Plakoglobin was detected at the plasma membrane already at the onset of tooth development in the epithelial cells of the tooth. This pattern remained unaltered during further tooth development. The mesenchymal cells only showed plakoglobin from cytodifferentiation onwards. Plakoglobin 1a morpholino-injected embryos showed normal tooth development with proper initiation and differentiation. Although plakoglobin is clearly present during normal odontogenesis, the loss of plakoglobin 1a does not influence tooth development. β-catenin was found at the cell borders of all cells of the successional lamina but also in the nuclei of surrounding mesenchymal cells. Only membranous, not nuclear, β-catenin, was found during morphogenesis stage. However, during cytodifferentiation stage, both nuclear and membrane-bound β-catenin was detected in the layers of the enamel organ as well as in the differentiating odontoblasts. Nuclear β-catenin is an indication of an activated Wnt pathway, therefore suggesting a possible role for Wnt signalling during zebrafish tooth development and replacement.

  2. Beta-Catenin and Plakoglobin Expression during Zebrafish Tooth Development and Replacement.

    Science.gov (United States)

    Verstraeten, Barbara; van Hengel, Jolanda; Huysseune, Ann

    2016-01-01

    We analyzed the protein distribution of two cadherin-associated molecules, plakoglobin and β-catenin, during the different stages of tooth development and tooth replacement in zebrafish. Plakoglobin was detected at the plasma membrane already at the onset of tooth development in the epithelial cells of the tooth. This pattern remained unaltered during further tooth development. The mesenchymal cells only showed plakoglobin from cytodifferentiation onwards. Plakoglobin 1a morpholino-injected embryos showed normal tooth development with proper initiation and differentiation. Although plakoglobin is clearly present during normal odontogenesis, the loss of plakoglobin 1a does not influence tooth development. β-catenin was found at the cell borders of all cells of the successional lamina but also in the nuclei of surrounding mesenchymal cells. Only membranous, not nuclear, β-catenin, was found during morphogenesis stage. However, during cytodifferentiation stage, both nuclear and membrane-bound β-catenin was detected in the layers of the enamel organ as well as in the differentiating odontoblasts. Nuclear β-catenin is an indication of an activated Wnt pathway, therefore suggesting a possible role for Wnt signalling during zebrafish tooth development and replacement.

  3. A short report on tooth replacement in an older suburban population in Nigeria.

    Science.gov (United States)

    Ibiyemi, Olushola; Lawal, Folake B

    2017-09-20

    To determine: the knowledge of the participants about removable dentures, importance of tooth replacement; prevalence of tooth loss and denture use; and factors associated with its non-use among an elderly population in Nigeria. Tooth loss without replacement can impact negatively on the quality of life of the elders, thus making use of denture a basic requirement for those with partial or complete edentulous arches in developed countries. It is, however, not known if this is the case among elders in suburban Nigeria. A cross-section of 392 consenting elderly participants aged ≥65 years residing at Idikan, Ibadan, Nigeria, were interviewed on their biodata, knowledge of removable denture and importance of tooth replacement, history of use of denture and reasons for non-use where applicable. Oral examinations for the presence of missing teeth and denture were conducted by an examiner. Data were analysed with SPSS and P value set at ˂.05. The mean age of the participants was 73 (SD = 9.2) years. About 39% of the participants believed that it was important to replace missing teeth, 56.0% had poor knowledge about tooth replacement options, and 47.7% had at least a missing tooth. Only 7.1% of those with missing teeth had them replaced and all were using removable acrylic partial dentures. Financial constraint was the main reason for non-replacement of missing teeth (80.1%). Age, gender, occupation before retirement, income, level of education and presence of physical impairment were associated with non-use of denture (P ˂ .05). Many elderly individuals had poor knowledge about removable dentures and the importance of tooth replacement. About half of the participants had full complement of teeth and only 7.1% of those with tooth loss reported denture wear. Major reasons for non-use of dentures were due to economic reasons. © 2017 John Wiley & Sons A/S and The Gerodontology Association. Published by John Wiley & Sons Ltd.

  4. A multidisciplinary esthetic approach to single-tooth replacement and diastema closure.

    Science.gov (United States)

    Lyssova, Valentina; Estafan, Denise; Cunnigham, Ralph P

    2008-05-01

    Anterior tooth replacement has always posed an esthetic challenge for dentists. A multidisciplinary approach makes it possible to provide patients with esthetics and function. Treatment planning should involve other specialists when clinicians are faced with the additional esthetic concerns of the patient (such as anterior spatial anomalies and esthetically unpleasant existing restorations). Metal-ceramic fixed partial dentures have been used to allow the replacement of missing teeth for many years, providing both strength and esthetics. Several other options also are available, including implant placement. Dental implants in the esthetic zone are well-documented in the literature; numerous controlled clinical trials have shown overall implant survival and success rates. This article illustrates a step-by-step analysis and treatment option for a single-tooth replacement and maxillary anterior spatial dilemma using Captek crowns.

  5. Economic evaluation of single-tooth replacement: dental implant versus fixed partial denture.

    Science.gov (United States)

    Kim, Younhee; Park, Joo-Yeon; Park, Sun-Young; Oh, Sung-Hee; Jung, YeaJi; Kim, Ji-Min; Yoo, Soo-Yeon; Kim, Seong-Kyun

    2014-01-01

    This study assessed the cost-effectiveness from a societal perspective of a dental implant compared with a three-unit tooth-supported fixed partial denture (FPD) for the replacement of a single tooth in 2010. A decision tree was developed to estimate cost-effectiveness over a 10-year period. The survival rates of single-tooth implants and FPDs were extracted from a meta-analysis of single-arm studies. Medical costs included initial treatment costs, maintenance costs, and costs to treat complications. Patient surveys were used to obtain the costs of the initial single-tooth implant or FPD. Maintenance costs and costs to treat complications were based on surveys of seven clinical experts at dental clinics or hospitals. Transportation costs were calculated based on the number of visits for implant or FPD treatment. Patient time costs were estimated using the number of visits and time required, hourly wage, and employment rate. Future costs were discounted by 5% to convert to present values. The results of a 10-year period model showed that a single dental implant cost US $261 (clinic) to $342 (hospital) more than an FPD and had an average survival rate that was 10.4% higher. The incremental cost-effectiveness ratio was $2,514 in a clinic and $3,290 in a hospital for a prosthesis in situ for 10 years. The sensitivity analysis showed that initial treatment costs and survival rate influenced the cost-effectiveness. If the cost of an implant were reduced to 80% of the current cost, the implant would become the dominant intervention. Although the level of evidence for effectiveness is low, and some aspects of single-tooth implants or FPDs, such as satisfaction, were not considered, this study will help patients requiring single-tooth replacement to choose the best treatment option.

  6. Single Tooth Replacement Using InCeram Resin Bonded Fixed Partial Denture: A Clinical Report.

    Directory of Open Access Journals (Sweden)

    Elnaz Moslehifard

    2014-02-01

    Full Text Available This clinical report describes a treatment option for replacement of a missing mandibular anterior tooth using InCeram resin bonded fixed partial denture (RBFPD. The conventional approach for replacing mandibular incisors dictates the placement of either a conventional porcelain-fused-to-metal (PFM bridge, Maryland bridge, or fiber-reinforced composite veneer bridge and several appearance-related disadvantages have been reported in the use of a prosthesis that incorporates a metal substructure. The InCeram bridge is a minimally invasive restoration and eliminates undesirable incisal graying frequently observed in metal RBFPDs. This method was successfully clinically applied to overcome shortcomings of other approaches that may require a minimal invasive technique to preserve lasting sound tooth structure.

  7. Dental implant as an option for tooth replacement: The awareness of patients at a tertiary hospital in a developing country

    Directory of Open Access Journals (Sweden)

    Olaide Shakeerah Gbadebo

    2014-01-01

    Full Text Available Aim: A survey was set out to evaluate the knowledge of patients about tooth replacement as a whole, and assess their awareness of implant-retained prosthesis as an option of tooth replacement. Materials and Methods: Information on sociodemographic characteristics, knowledge about implant-retained tooth as an option for missing tooth replacement, cost implication, source of information and knowledge about other options of tooth replacement were obtained from patients attending the dental clinics of the University College Hospital, Ibadan, using structured self-administered questionnaires. Data were analyzed using SPSS version 20. Result: A total of 220 patients aged 18-84 years with a mean age of 37.6 (±16.5 years participated in the study, with a male to female ratio of 1:1.1. The majority (92.5% knew that missing teeth can be replaced, while a significantly lower proportion (28.9% knew about dental implants as an option (P < 0.01. Dentists were the major source of information on dental implants (68%. Only 21 (36.8% of those who had heard about dental implant had knowledge about the cost (P < 0.000. Conclusion: A low level of awareness about dental implant as tooth replacement option exist in this environment, although most of the study participants were aware that missing teeth can be replaced.

  8. A comparison of tooth retention and replacement across 15 countries in the over-50s.

    Science.gov (United States)

    Stock, Christian; Jürges, Hendrik; Shen, Jing; Bozorgmehr, Kayvan; Listl, Stefan

    2016-06-01

    Oral diseases are still among the most common chronic diseases globally with substantial detrimental impact especially on elderly people's health and well-being. However, limited evidence exists on international variation in the oral health status of the older population. We aimed to examine international variation in tooth loss and tooth replacement in the general population aged between 50 and 90 years. A cross-sectional analysis of data from the fifth wave of the Survey of Health, Ageing and Retirement in Europe (SHARE) was conducted. The data cover 14 European countries (Austria, Belgium, Czech Republic, Denmark, Estonia, France, Germany, Italy, Luxembourg, the Netherlands, Slovenia, Spain, Sweden, and Switzerland) and Israel, and they were collected during the year 2013. Age-specific percentages of the population having all natural teeth, the age-specific numbers of natural (and artificial) teeth, and the age-specific percentages of full, partial, or no replacement of missing teeth were assessed with stratification by country. It was further evaluated to which extent proposed oral health goals concerning tooth loss at higher ages had been achieved. In total, 62,763 individuals were included in the study. Age-standardized mean numbers of natural teeth exhibited substantial variation, ranging from 14.3 (Estonia) to 24.5 (Sweden). The oral health goal of retaining at least 20 teeth at age 80 years was achieved by 25% of the population or less in most countries. A target concerning edentulism (≤15% in population aged 65-74 years) was reached in Sweden, Switzerland, Denmark, France, and Germany. Tooth replacement practices varied especially for a number of up to five missing teeth which were more likely to be replaced in Austria, Germany, Luxembourg, and Switzerland than in Israel, Denmark, Estonia, Spain, and Sweden. This study suggests that the age-specific number of natural teeth and the practice of tooth replacement in the over 50s differ substantially among

  9. Unique method of tooth replacement in durophagous placodont marine reptiles, with new data on the dentition of Chinese taxa.

    Science.gov (United States)

    Neenan, James M; Li, Chun; Rieppel, Olivier; Bernardini, Federico; Tuniz, Claudio; Muscio, Giuseppe; Scheyer, Torsten M

    2014-05-01

    The placodonts of the Triassic period (~252-201 mya) represent one of the earliest and most extreme specialisations to a durophagous diet of any known reptile group. Exceptionally enlarged crushing tooth plates on the maxilla, dentary and palatine cooperated to form functional crushing areas in the buccal cavity. However, the extreme size of these teeth, combined with the unusual way they occluded, constrained how replacement occurred. Using an extensive micro-computed tomographic dataset of 11 specimens that span all geographic regions and placodont morphotypes, tooth replacement patterns were investigated. In addition, the previously undescribed dental morphologies and formulae of Chinese taxa are described for the first time and incorporated into the analysis. Placodonts have a unique tooth replacement pattern and results follow a phylogenetic trend. The plesiomorphic Placodus species show many replacement teeth at various stages of growth, with little or no discernible pattern. On the other hand, the more derived cyamodontoids tend to have fewer replacement teeth growing at any one time, replacing teeth unilaterally and/or in functional units, thus maintaining at least one functional crushing area at all times. The highly derived placochelyids have fewer teeth and, as a result, only have one or two replacement teeth in the upper jaw. This supports previous suggestions that these taxa had an alternative diet to other placodonts. Importantly, all specimens show at least one replacement tooth growing at the most posterior palatine tooth plates, indicating increased wear at this point and thus the most efficient functional crushing area.

  10. A 5-year prospective study of single-tooth replacements supported by the Astra Tech implant: a pilot study

    DEFF Research Database (Denmark)

    Gotfredsen, Klaus

    2004-01-01

    BACKGROUND: Implant-supported single-tooth replacements are an increasingly used method to replace teeth, especially in young patients. Therefore, long-term validation of different treatment modalities with different implant systems is of great importance. PURPOSE: The aim of the present study wa...

  11. A 5-year prospective study of single-tooth replacements supported by the Astra Tech implant: a pilot study

    DEFF Research Database (Denmark)

    Gotfredsen, Klaus

    2004-01-01

    BACKGROUND: Implant-supported single-tooth replacements are an increasingly used method to replace teeth, especially in young patients. Therefore, long-term validation of different treatment modalities with different implant systems is of great importance. PURPOSE: The aim of the present study...

  12. Outcome of bonded vs all-ceramic and metal- ceramic fixed prostheses for single tooth replacement.

    Science.gov (United States)

    Karl, Matthias

    2016-01-01

    The conventional treatment of a single missing tooth is most frequently based on the provision of a fixed dental prosthesis (FDPs). A variety of designs and restorative materials are available which have an impact on the treatment outcome. Consequently, it was the aim of this review to compare resin-bonded, all-ceramic and metal-ceramic FDPs based on existing evidence. An electronic literature search using "metal-ceramic" AND "fixed dental prosthesis" AND "clinical, all-ceramic" AND "fixed dental prosthesis" AND "clinical, resin-bonded" AND "fixed dental prosthesis" AND "clinical, fiber reinforced composite" AND "clinical, monolithic" AND "zirconia" AND "clinical" was conducted and supplemented by the manual searching of bibliographies from articles already included. A total of 258 relevant articles were identified. Metal-ceramic FDPs still show the highest survival rates of all tooth-supported restorations. Depending on the ceramic system used, all-ceramic restorations may reach comparable survival rates while the technical complications, i.e. chipping fractures of veneering materials in particular, are more frequent. Resin-bonded FDPs can be seen as long-term provisional restorations with the survival rate being higher in anterior locations and when a cantilever design is applied. Inlay-retained FDPs and the use of fiber-reinforced composites overall results in a compromised long-term prognosis. Recently advocated monolithic zirconia restorations bear the risk of low temperature degradation. Several variables affect treatment planning for a given patient situation, with survival and success rates of different restorative options representing only one factor. The broad variety of designs and materials available for conventional tooth-supported restorations should still be considered as a viable treatment option for single tooth replacement.

  13. Tooth replacement related to number of natural teeth in a dentate adult population in Bulgaria: a cross-sectional study

    NARCIS (Netherlands)

    Damyanov, N.D.; Witter, D.J.; Bronkhorst, E.M.; Creugers, N.H.J.

    2013-01-01

    PURPOSE: This study aimed to explore the relationships among tooth replacement, number of present natural teeth, and sociodemographic and behavioral factors in an adult population in Bulgaria. MATERIALS AND METHODS: Quota sampling was used to recruit 2,531 dentate subjects aged 20 years and over fro

  14. Natural products as storage media for avulsed tooth

    Directory of Open Access Journals (Sweden)

    Deepika Jain

    2015-01-01

    Full Text Available Avulsion of tooth is complete displacement of tooth out of its socket that results in mutilation of periodontal ligaments. The desirable treatment option is replantation of the tooth. However, unsuccessful replantation is a matter of great discontentment. Unsuccessful replantation is due to inappropriate management of the avulsed tooth. Protection of teeth from desiccation due to drying of the periodontal ligament tissue, by keeping it in storage media can improve the outcome of the treatment. This review paper focuses on the use of natural products as storage media for avulsed teeth. In vitro and in vivo research published during 1995-2014, allowing open access on National Center for Biotechnology Information (NCBI database and articles on EBSCO host (EBSCO-Elton B. Stephens Company were included. It was found that natural products such as milk, coconut water, propolis, green tea, red mulberry, Aloe vera, egg-white and pomegranate have shown ability to maintain viability of periodontal ligament cells of avulsed teeth. Few natural products such as coconut water and milk can be used in raw form, while other products such as green tea and red mulberry need processing. Ability to maintain periodontal cell viability for a longer time is warranted in cases of major accidents, where teeth can be replanted only after other major surgeries. Natural products have easy availability, greater efficacy and longer storage time as compared to Hank′s balanced salt solution which has been recommended by the International Association of Dental Traumatology as standard solution for storage of avulsed teeth. Natural products have shown good qualities in in vitro experiments; further in vivo studies are needed to evaluate their efficacy as storage media.

  15. Single-tooth replacement by osseointegrated Astra Tech dental implants: a 2-year report

    DEFF Research Database (Denmark)

    Karlsson, U; Gotfredsen, K; Olsson, C

    1998-01-01

    This study presents the outcome of single-tooth restorations supported by Astra Tech single-tooth implants followed for 2 years. Forty-seven implants were placed in the same number of patients. Forty-three patients attended the second recall visit, and none of the evaluated implants have been...

  16. Telemedicine consulting in the patient preparation and planning of prosthetic tooth replacement.

    Science.gov (United States)

    Mladenović, Dragan; Tosić, Goran; Zivković, Dusan; Djindjić, Natasa; Mladenović, Lidija; Mladenović, Sanja; Marković, Ivana

    2013-09-01

    In the management of edentulous spaces, there is a permanent need of a dentist-prosthetician in charge to consult other specialists. Modern telemedicine, based on powerful computer and telecomunication systems, offers an adequate answer to these challenges, being able to transfer and obtain clinical data and consultation information over large distances. Using smartphone or a computer, the teleconsultant acces the system, downloads and review the data and photographs and gave suggestions. The system then enables direct, real time contact with the consultant, chat, or directs them to contact each other by phone. We presented telemedicine consulting in the patient preparation and planning of prosthetic tooth replacement in 3 cases with different teleconsultation requirements: the first case for prosthetic rehabilitation of his upper teeth, the second one for prosthetic management of his partial edentulousness and "a growth on his gums" in the vestibular region of the frontal teeth and the third one for prosthetic management of total edentulousness of her upper jaw. We used the system of telemedicine in dentistry, established at the Faculty of Medicine in Kosovska Mitrovica. The operation was based on the computer application system XPA3 Online, computer networking and mobile smartphone network. All consultations were succefull with no need for further procedures in regional center. The use of a mobile smartphone has brought about the mobility and availability of teleconsultant specialists in an extent never seen before. Prostheticians are thus able to offer better service to their patients and improve the quality of management of partially or totally edentulous patients, especially in rural areas.

  17. Telemedicine consulting in the patient preparation and planning of prosthetic tooth replacement

    Directory of Open Access Journals (Sweden)

    Mladenović Dragan

    2013-01-01

    Full Text Available Introduction. In the management of edentulous spaces, there is a permanent need of a dentist-prosthetician in charge to consult other specialists. Modern telemedicine, based on powerful computer and telecomunication systems, offers an adequate answer to these challenges, being able to transfer and obtain clinical data and consultation information over large distances. Using smartphone or a computer, the teleconsultant acces the system, downloads and review the data and photographs and gave suggestions. The system then enables direct, real time contact with the consultant, chat, or directs them to contact each other by phone. Case report. We presented telemedicine consulting in the patient preparation and planning of prosthetic tooth replacement in 3 cases with different teleconsultation requirements: the first case for prosthetic rehabilitation of his upper teeth, the second one for prosthetic management of his partial edentulousness and “a growth on his gums” in the vestibular region of the frontal teeth and the third one for prosthetic management of total edentulousness of her upper jaw. We used the system of telemedicine in dentistry, established at the Faculty of Medicine in Kosovska Mitrovica. The operation was based on the computer application system XPA3 Online, computer networking and mobile smartphone network. All consultations were succefull with no need for further procedures in regional center. Conclusion. The use of a mobile smartphone has brought about the mobility and availability of teleconsultant specialists in an extent never seen before. Prostheticians are thus able to offer better service to their patients and improve the quality of management of partially or totally edentulous patients, especially in rural areas.

  18. Aesthetic Alternative Using Composite Resin to Replace a Missing Tooth. A Case Report

    Directory of Open Access Journals (Sweden)

    Yuritza Hernández Núñez

    2014-06-01

    Full Text Available Patients who experience dental trauma resulting in permanent tooth loss are often prosthetically rehabilitated through any of its variants. However, it is uncommon to rehabilitate a patient using composite resin when a tooth is lost. The case of a patient who had lost a maxillary central incisor years ago and its space had been occupied by the lateral incisor is presented. The missing tooth was built up through the enlargement of the lateral incisor using the layering technique or stratification with Brilliant New Line resin. This paper aims at demonstrating a more economical and simpler alternative for restoring the aesthetics of a patient with unfavorable prognosis.

  19. The endodontically involved tooth: treat, or extract, and replace?%牙髓病患牙:治疗,拔除,种植?

    Institute of Scientific and Technical Information of China (English)

    Roger J.Smales

    2010-01-01

    @@ Introduction In recent years there has been increasing discussion and controversy regarding endodontic therapy and restoration versus tooth extraction and replacement with an osseointegrated dental implant-supported single crown[1-10].

  20. Residual ridge dimensions at edentulous maxillary first molar sites and periodontal bone loss among two ethnic cohorts seeking tooth replacement.

    Science.gov (United States)

    Acharya, Aneesha; Hao, Jia; Mattheos, Nikos; Chau, Anson; Shirke, Prashant; Lang, Niklaus P

    2014-12-01

    To study residual ridge dimensions at edentulous first molar sites in relation to periodontal bone loss among cohorts of partially edentulous Asian Indian and Hong Kong Chinese subjects seeking tooth replacement. A total of 628 edentulous maxillary first molar sites were analyzed on Cone Beam Computed Tomography scans of 225 Asian Indian (I) and 232 Hong Kong Chinese (C) partially edentulous adults seeking tooth replacement. Age, ethnicity, gender, total tooth loss, the presence or absence of adjacent teeth, categories of periodontal status defined according to radiographic alveolar bone loss (P0: periodontal health, P1: incipient to moderate disease, P2: severe periodontal disease) and sinus membrane abnormalities were noted. Alveolar ridge height (RH), widths at 1 and 3 mm from crest (RW1; RW3), and relative position of the bone crest (RR) were measured. Prevalence of P2 status was most frequent in both cohorts(C: 50.4% I: 49.2%). P2 had lowest ridge heights; 13.1% C P2 and 14%I P2 had RH Sinus membrane abnormalities were most frequent in P2. Periodontal status and sinus membrane abnormality increased the odds of RH sinus membrane thickening affected available bone height in the subsinus region, while the presence of adjacent teeth- and age-affected residual ridge width. © 2013 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  1. Bio-Root and Implant-Based Restoration as a Tooth Replacement Alternative.

    Science.gov (United States)

    Gao, Z H; Hu, L; Liu, G L; Wei, F L; Liu, Y; Liu, Z H; Fan, Z P; Zhang, C M; Wang, J S; Wang, S L

    2016-06-01

    We previously reported that dental stem cell-mediated bioengineered tooth root (bio-root) regeneration could restore tooth loss in a miniature pig model. As a potential new method for tooth restoration, it is essential to compare this method with the widely used commercial dental implant-based method of tooth restoration. Tooth loss models were created by extracting mandibular incisors from miniature pigs. Allogeneic periodontal ligament stem cells (PDLSCs) and dental pulp stem cells (DPSCs) were isolated and cultured. A PDLSC sheet was prepared by adding 20.0 µg/mL vitamin C to the culture medium; in addition, a hydroxyapatite tricalcium phosphate (HA/TCP)/DPSC graft was fabricated and cultured in a 3-dimensional culture system. A total of 46 bio-root implantations and 9 dental implants were inserted, and crown restorations were performed 6 mo after implantation. Histological, radiological, biomechanical, and elemental analyses were used to evaluate and compare tissue-engineered bio-roots and dental implants to the natural tooth roots. After 6 mo, both computed tomography scans and histological examinations showed that root-like structures and dentin-like tissues had formed. Three months after crown restoration, clinical assessments revealed that tooth function was equivalent in the regenerated bio-root and the dental implant. Biomechanical testing showed that the bio-roots were similar to natural tooth roots in compressive strength, modulus of elasticity, and torsional force; however, these properties were significantly higher in the dental implants. Elemental analysis revealed a higher similarity in elemental composition between bio-roots and natural tooth roots than between bio-roots and dental implants. However, the dental implant success rate was 100% (9 of 9) and the bio-root success rate was only 22% (10 of 46). Taken together, we showed that an allogeneic HA/TCP/DPSC/PDLSC sheet could successfully build a bio-root with structure and function similar to

  2. Autotransplantation of a Supernumerary Tooth to Replace a Misaligned Incisor with Abnormal Dimensions and Morphology: 2-Year Follow-Up

    Directory of Open Access Journals (Sweden)

    R. Ebru Tirali

    2013-01-01

    Full Text Available Autotransplantation is a viable treatment option to restore esthetics and function impaired by abnormally shaped teeth when a suitable donors tooth is available. This paper describes the autotransplantation and 2-year follow-up of a supernumerary maxillary incisor as a replacement to a misaligned maxillary incisor with abnormal crown morphology and size. The supernumerary incisor was immediately autotransplanted into the extraction site of the large incisor and was stabilized with a bonded semirigid splint for 2 weeks. Fixed orthodontic therapy was initiated 3 months after autotransplantation. Ideal alignment of the incisors was accomplished after 6 months along with radiographic evidence of apical closure and osseous/periodontal regeneration. In autogenous tooth transplantation, a successful clinical outcome can be achieved if the cases are selected and treated properly.

  3. Randomized controlled trial to evaluate tooth stain reduction with nicotine replacement gum during a smoking cessation program

    LENUS (Irish Health Repository)

    Whelton, Helen

    2012-06-13

    AbstractBackgroundIn addition to its general and periodontal health effects smoking causes tooth staining. Smoking cessation support interventions with an added stain removal or tooth whitening effect may increase motivation to quit smoking. Oral health professionals are well placed to provide smoking cessation advice and support to patients. The objective of the present study was to evaluate the effect of Nicorette® Freshmint Gum used in a smoking cessation programme administered in a dental setting, on extrinsic stain and tooth shade among smokers.MethodsAn evaluator-blinded, randomized, 12-week parallel-group controlled trial was conducted among 200 daily smokers motivated to quit smoking. Participants were randomised to use either the Nicorette® Freshmint Gum or Nicorette® Microtab (tablet). Tooth staining and shade were rated using the modified Lobene Stain Index and the Vita® Shade Guide at baseline, weeks 2, 6 and 12. To maintain consistency with other whitening studies, the primary end-point was the mean change in stain index between baseline and week 6. Secondary variables included changes in stain measurements and tooth shade at the other time points the number of gums or tablets used per day and throughout the trial period; and the number of cigarettes smoked per day. Treatments were compared using analysis of covariance (ANCOVA), using treatment and nicotine dependence as factors and the corresponding baseline measurement as a covariate. Each comparison (modified intention-to-treat) was tested at the 0.05 level, two-sided. Within-treatment changes from baseline were compared using a paired t-test.ResultsAt week 6, the gum-group experienced a reduction in mean stain scores whilst the tablet-group experienced an increase with mean changes of -0.14 and +0.12 respectively, (p = 0.005, ANCOVA). The change in mean tooth shade scores was statistically significantly greater in the gum-group than in the tablet group at 2 (p = 0.015), 6 (p = 0

  4. Functional tooth restoration by next-generation bio-hybrid implant as a bio-hybrid artificial organ replacement therapy.

    Science.gov (United States)

    Oshima, Masamitsu; Inoue, Kaoru; Nakajima, Kei; Tachikawa, Tetsuhiko; Yamazaki, Hiromichi; Isobe, Tomohide; Sugawara, Ayaka; Ogawa, Miho; Tanaka, Chie; Saito, Masahiro; Kasugai, Shohei; Takano-Yamamoto, Teruko; Inoue, Takashi; Tezuka, Katsunari; Kuboki, Takuo; Yamaguchi, Akira; Tsuji, Takashi

    2014-01-01

    Bio-hybrid artificial organs are an attractive concept to restore organ function through precise biological cooperation with surrounding tissues in vivo. However, in bio-hybrid artificial organs, an artificial organ with fibrous connective tissues, including muscles, tendons and ligaments, has not been developed. Here, we have enveloped with embryonic dental follicle tissue around a HA-coated dental implant, and transplanted into the lower first molar region of a murine tooth-loss model. We successfully developed a novel fibrous connected tooth implant using a HA-coated dental implant and dental follicle stem cells as a bio-hybrid organ. This bio-hybrid implant restored physiological functions, including bone remodelling, regeneration of severe bone-defect and responsiveness to noxious stimuli, through regeneration with periodontal tissues, such as periodontal ligament and cementum. Thus, this study represents the potential for a next-generation bio-hybrid implant for tooth loss as a future bio-hybrid artificial organ replacement therapy.

  5. A rotated palatal flap ridge preservation technique to enhance restorative and hard and soft tissue esthetics for tooth replacement in the anterior maxilla.

    Science.gov (United States)

    Bitter, Robert N

    2010-04-01

    Hard and soft tissue alveolar ridge deformities occur following the extraction of teeth, creating functional and esthetic tooth replacement challenges, especially in the maxillary anterior smile zone. A surgical technique using a rotated palatal flap for ridge preservation is discussed that, whether combined with conventional fixed dentures or implant treatment for tooth replacement, provides the possibility for greatly improved esthetics. This technique, used in combination with or in preparation for implant treatment, allows for preservation of the alveolar bone height and width for improved implant size and placement options. In addition, preservation and enhancement of the soft tissue at the extraction site provides for soft tissue contours adjacent to the definitive restoration that vary little from those of the original natural tooth. Combined with conventional fixed dentures, use of this technique creates a template of the labial and interproximal sulcus of the extracted tooth, allowing for the molding of an ovate pontic replacement tooth. This results in vastly improved restorative emergence profiles with minimal or no change in the height of the labial gingival margin and the form and height of the interproximal papillae with adjacent teeth.

  6. Digital reconstruction of the mandible of an adult Lesothosaurus diagnosticus with insight into the tooth replacement process and diet

    Science.gov (United States)

    Knoll, Fabien; Bordy, Emese M.; de Kock, Michiel O.; Redelstorff, Ragna

    2017-01-01

    Fragmentary caudal ends of the left and right mandible assigned to Lesothosaurus diagnosticus, an early ornithischian, was recently discovered in the continental red bed succession of the upper Elliot Formation (Lower Jurassic) at Likhoele Mountain (Mafeteng District) in Lesotho. Using micro-CT scanning, this mandible could be digitally reconstructed in 3D. The replacement teeth within the better preserved (left) dentary were visualised. The computed tomography dataset suggests asynchronous tooth replacement in an individual identified as an adult on the basis of bone histology. Clear evidence for systematic wear facets created by attrition is lacking. The two most heavily worn teeth are only apically truncated. Our observations of this specimen as well as others do not support the high level of dental wear expected from the semi-arid palaeoenvironment in which Lesothosaurus diagnosticus lived. Accordingly, a facultative omnivorous lifestyle, where seasonality determined the availability, quality, and abundance of food is suggested. This would have allowed for adaptability to episodes of increased environmental stress. PMID:28265518

  7. REPLACEMENT ANALYSIS FOR DEFECTED PRODUCTS: A SYSTEM DYNAMIC MODELING APPROACH

    Directory of Open Access Journals (Sweden)

    R. N. Mall

    2012-07-01

    Full Text Available The current growth in present time due to globalization of markets means more competition for companies especially those in developing economies that have limited analytical tools for business decisions. Market demand uncertainty affects the performance and behavior of the planning processes used by production to satisfy sales. This uncertainty and the resulting instability in the production schedules affect the relationships with the suppliers from whom the company purchases raw materials and component parts. In order to solve the problem, this research developed a SCM system dynamics model that helps business managers and researchers in SCM make better and informed decisions for close life cycle products. The work is focused on the study of behavior of replacement in a supply chain related to closed life-cycle products by system dynamics, that are goods produced and sold and if any defect is found the product is replaced. This study includes the effect of replacement in profit and other variables. This work also includes the development of a model in the system and validation of the model. In this model the relation of the variables like customer, demand, cost, price is studied and the work is focused that what will be the optimum value of the defected product. It has been assumed that if we want to decrease the defected product the cost of the production will increase and that will reduce the profit and if we want to increase the defect the no of customers will decrease and their demand will decrease and this will decrease the profit.

  8. New Product Marketing Blurs the Line Between Nicotine Replacement Therapy and Smokeless Tobacco Products.

    Science.gov (United States)

    Kostygina, Ganna; England, Lucinda; Ling, Pamela

    2016-07-01

    Tobacco companies have begun to acquire pharmaceutical subsidiaries and recently started to market nicotine replacement therapies, such as Zonnic nicotine gum, in convenience stores. Conversely, tobacco companies are producing tobacco products such as tobacco chewing gum and lozenges that resemble pharmaceutical nicotine replacement products, including a nicotine pouch product that resembles snus pouches. This convergence of nicotine and tobacco product marketing has implications for regulation and tobacco cessation.

  9. Replacement

    Directory of Open Access Journals (Sweden)

    S. Radhakrishnan

    2014-03-01

    Full Text Available The fishmeal replaced with Spirulina platensis, Chlorella vulgaris and Azolla pinnata and the formulated diet fed to Macrobrachium rosenbergii postlarvae to assess the enhancement ability of non-enzymatic antioxidants (vitamin C and E, enzymatic antioxidants (superoxide dismutase (SOD and catalase (CAT and lipid peroxidation (LPx were analysed. In the present study, the S. platensis, C. vulgaris and A. pinnata inclusion diet fed groups had significant (P < 0.05 improvement in the levels of vitamins C and E in the hepatopancreas and muscle tissue. Among all the diets, the replacement materials in 50% incorporated feed fed groups showed better performance when compared with the control group in non-enzymatic antioxidant activity. The 50% fishmeal replacement (best performance diet fed groups taken for enzymatic antioxidant study, in SOD, CAT and LPx showed no significant increases when compared with the control group. Hence, the present results revealed that the formulated feed enhanced the vitamins C and E, the result of decreased level of enzymatic antioxidants (SOD, CAT and LPx revealed that these feeds are non-toxic and do not produce any stress to postlarvae. These ingredients can be used as an alternative protein source for sustainable Macrobrachium culture.

  10. Decellularized Tooth Bud Scaffolds for Tooth Regeneration.

    Science.gov (United States)

    Zhang, W; Vazquez, B; Oreadi, D; Yelick, P C

    2017-01-01

    Whole tooth regeneration approaches currently are limited by our inability to bioengineer full-sized, living replacement teeth. Recently, decellularized organ scaffolds have shown promise for applications in regenerative medicine by providing a natural extracellular matrix environment that promotes cell attachment and tissue-specific differentiation leading to full-sized organ regeneration. We hypothesize that decellularized tooth buds (dTBs) created from unerupted porcine tooth buds (TBs) can be used to guide reseeded dental cell differentiation to form whole bioengineered teeth, thereby providing a potential off-the-shelf scaffold for whole tooth regeneration. Porcine TBs were harvested from discarded 6-mo-old pig jaws, and decellularized by successive sodium dodecyl sulfate/Triton-X cycles. Four types of replicate implants were used in this study: 1) acellular dTBs; 2) recellularized dTBs seeded with porcine dental epithelial cells, human dental pulp cells, and human umbilical vein endothelial cells (recell-dTBs); 3) dTBs seeded with bone morphogenetic protein (BMP)-2 (dTB-BMPs); and 4) freshly isolated nondecellularized natural TBs (nTBs). Replicate samples were implanted into the mandibles of host Yucatan mini-pigs and grown for 3 or 6 mo. Harvested mandibles with implanted TB constructs were fixed in formalin, decalcified, embedded in paraffin, sectioned, and analyzed via histological methods. Micro-computed tomography (CT) analysis was performed on harvested 6-mo samples prior to decalcification. All harvested constructs exhibited a high degree of cellularity. Significant production of organized dentin and enamel-like tissues was observed in dTB-recell and nTB implants, but not in dTB or dTB-BMP implants. Micro-CT analyses of 6-mo implants showed the formation of organized, bioengineered teeth of comparable size to natural teeth. To our knowledge, these results are the first to describe the potential use of dTBs for functional whole tooth regeneration.

  11. The replacement of fishmeal by plant proteins in piglet production

    Directory of Open Access Journals (Sweden)

    G. Martelli

    2010-01-01

    Full Text Available According to EC Commission Decision 9/2001 on BSE protection (OJEC, 2001, feedstuffs containing fishmeal can be produced only in establishments manufacturing animal feed which do not prepare feedstuffs for ruminant animals and which are authorised for this purpose by the competent authority. This fact, leading to a reduction of the productive capacity of small establishments, and the increasing aversion of consumers towards the use of animal protein in feedstuffs justify the studies about the possibility of excluding fishmeal from young animal formulations. The aim of the present work was to evaluate the effect of the total replacement of fishmeal by some vegetable protein sources in piglet diets.

  12. 牙仙女%The Tooth Fairy

    Institute of Scientific and Technical Information of China (English)

    李世荣

    2009-01-01

    @@ The American children’s ritual of hiding a lost tooth under a pillow stems from an old German tradition of placing a lost tooth in a mouse or rat hole SO that when a new tooth grew in,it would possess the strong dental qualities of a rodent’S tooth.In America the “tooth rat”was replaced by the“tooth fairy”,who would compensate the child with money for surrendering a tooth to her.

  13. Socket seal surgery: Clinical uses in implant dentistry and guided bone regeneration procedures for single tooth replacement in the esthetic zone.

    Science.gov (United States)

    Negri, Bruno; Zuhr, Otto; Fickl, Stefan; Ciurana, Xavier Rodríguez; Navarro Martínez, José Manuel; Blanco, Víctor Méndez

    2016-02-01

    Restoring failing anterior teeth with a dental implant is considered a complex treatment even with thorough biologic knowledge of the situation. The goal is to produce a result in which the labial soft tissues and the papillae remain stable over time. Treatment of the fresh extraction socket in the alveolar ridge presents a challenge in everyday clinical practice. Regardless of the subsequent treatment, maintenance of the ridge contour will frequently facilitate all further therapeutic steps. Socket seal surgery and socket preservation in combination with immediate, early, or delayed implant placement can be valuable procedures for single tooth replacement. However, their potential as ridge preservation techniques in these different situations still needs to be demonstrated. The use of these procedures is illustrated in three consecutive cases.

  14. Non-Metallic Biomaterials for Tooth Repair and Replacement. By Pekka Vallittu, Woodhead Publishing, 2013; 406 pages. Price £145.00/US$245.00/€175.00 ISBN 978-0-85709-244-1

    Directory of Open Access Journals (Sweden)

    Shu-Kun Lin

    2013-01-01

    Full Text Available 1. Discusses the properties of enamel and dentin and their role in adhesive dental restoration;2. Chapters also examine the wear properties of dental ceramics, glasses and bioactive glass ceramics for tooth repair and replacement;3. Dental composites and antibacterial restorative materials are also considered;4. Provides a concise overview of non-metallic biomaterials for dental clinicians, materials scientists and academic researchers alike.As the demand for healthy, attractive teeth increases, the methods and materials employed in restorative dentistry have become progressively more advanced. Non-metallic biomaterials for tooth repair and replacement focuses on the use of biomaterials for a range of applications in tooth repair and, in particular, dental restoration.

  15. Tooth Problems

    Science.gov (United States)

    ... that knocked out a tooth?YesNoDo you have pain that is specific to one tooth?YesNoHave you broken or chipped a tooth, or ... room. The tooth may be saved.Start OverDiagnosisYour pain may be from a FRACTURED, CRACKED or LOOSE TOOTH.Self CareSave any pieces of the tooth, wrap ...

  16. Laboratory Evaluation of LED T8 Replacement Lamp Products

    Energy Technology Data Exchange (ETDEWEB)

    Richman, Eric E.; Kinzey, Bruce R.; Miller, Naomi J.

    2011-05-23

    A report on a lab setting analysis involving LED lamps intended to directly replace T8 fluorescent lamps (4') showing light output, power, and economic comparisons with other fluorescent options.

  17. Impacted tooth

    Science.gov (United States)

    ... is not causing any problems. Over-the-counter pain relievers may help if the impacted tooth causes discomfort. Warm saltwater (one-half teaspoon or ... tooth (or partially emerged tooth) and you have pain in the gums or other symptoms. Alternative Names ... tooth; Dental impaction; Unerupted tooth References ...

  18. Tooth extraction

    Science.gov (United States)

    ... this page: //medlineplus.gov/ency/article/007630.htm Tooth extraction To use the sharing features on this page, please enable JavaScript. A tooth extraction is a procedure to remove a tooth from ...

  19. Optimizing model. 1. Insemination, replacement, seasonal production and cash flow.

    NARCIS (Netherlands)

    Delorenzo, M.A.; Spreen, T.H.; Bryan, G.R.; Beede, D.K.; Arendonk, van J.A.M.

    1992-01-01

    Dynamic programming to solve the Markov decision process problem of optimal insemination and replacement decisions was adapted to address large dairy herd management decision problems in the US. Expected net present values of cow states (151,200) were used to determine the optimal policy. States

  20. Optimizing model. 1. Insemination, replacement, seasonal production and cash flow.

    NARCIS (Netherlands)

    Delorenzo, M.A.; Spreen, T.H.; Bryan, G.R.; Beede, D.K.; Arendonk, van J.A.M.

    1992-01-01

    Dynamic programming to solve the Markov decision process problem of optimal insemination and replacement decisions was adapted to address large dairy herd management decision problems in the US. Expected net present values of cow states (151,200) were used to determine the optimal policy. States wer

  1. Contribution of V(H replacement products in mouse antibody repertoire.

    Directory of Open Access Journals (Sweden)

    Lin Huang

    Full Text Available VH replacement occurs through RAG-mediated recombination between the cryptic recombination signal sequence (cRSS near the 3' end of a rearranged VH gene and the 23-bp RSS from an upstream unrearranged VH gene. Due to the location of the cRSS, VH replacement leaves a short stretch of nucleotides from the previously rearranged VH gene at the newly formed V-D junction, which can be used as a marker to identify VH replacement products. To determine the contribution of VH replacement products to mouse antibody repertoire, we developed a Java-based VH Replacement Footprint Analyzer (VHRFA program and analyzed 17,179 mouse IgH gene sequences from the NCBI database to identify VH replacement products. The overall frequency of VH replacement products in these IgH genes is 5.29% based on the identification of pentameric VH replacement footprints at their V-D junctions. The identified VH replacement products are distributed similarly in IgH genes using most families of VH genes, although different families of VH genes are used differentially. The frequencies of VH replacement products are significantly elevated in IgH genes derived from several strains of autoimmune prone mice and in IgH genes encoding autoantibodies. Moreover, the identified VH replacement footprints in IgH genes from autoimmune prone mice or IgH genes encoding autoantibodies preferentially encode positively charged amino acids. These results revealed a significant contribution of VH replacement products to the diversification of antibody repertoire and potentially, to the generation of autoantibodies in mice.

  2. Endodontic therapy or single tooth implant? A systematic review.

    Science.gov (United States)

    Torabinejad, Mahmoud; Lozada, Jaime; Puterman, Israel; White, Shane N

    2008-06-01

    Should a tooth with pulpal involvement be saved through endodontic therapy, or extracted and replaced with a single tooth implant? Within the limitations of the existing literature, this systematic review of treatment outcomes found that initial endodontic treatment had a high long-term survival rate, equivalent to replacement of a missing tooth with an implant-supported restoration. Single tooth implants should be considered as the first treatment option for patients requiring extraction and tooth replacement.

  3. Evolution and developmental diversity of tooth regeneration.

    Science.gov (United States)

    Tucker, Abigail S; Fraser, Gareth J

    2014-01-01

    This review considers the diversity observed during both the development and evolution of tooth replacement throughout the vertebrates in a phylogenetic framework from basal extant chondrichthyan fish and more derived teleost fish to mammals. We illustrate the conservation of the tooth regeneration process among vertebrate clades, where tooth regeneration refers to multiple tooth successors formed de novo for each tooth position in the jaws from a common set of retained dental progenitor cells. We discuss the conserved genetic mechanisms that might be modified to promote morphological diversity in replacement dentitions. We review current research and recent progress in this field during the last decade that have promoted our understanding of tooth diversity in an evolutionary developmental context, and show how tooth replacement and dental regeneration have impacted the evolution of the tooth-jaw module in vertebrates.

  4. VH Replacement Footprint Analyzer-I, a Java-Based Computer Program for Analyses of Immunoglobulin Heavy Chain Genes and Potential VH Replacement Products in Human and Mouse.

    Science.gov (United States)

    Huang, Lin; Lange, Miles D; Zhang, Zhixin

    2014-01-01

    VH replacement occurs through RAG-mediated secondary recombination between a rearranged VH gene and an upstream unrearranged VH gene. Due to the location of the cryptic recombination signal sequence (cRSS, TACTGTG) at the 3' end of VH gene coding region, a short stretch of nucleotides from the previous rearranged VH gene can be retained in the newly formed VH-DH junction as a "footprint" of VH replacement. Such footprints can be used as markers to identify Ig heavy chain (IgH) genes potentially generated through VH replacement. To explore the contribution of VH replacement products to the antibody repertoire, we developed a Java-based computer program, VH replacement footprint analyzer-I (VHRFA-I), to analyze published or newly obtained IgH genes from human or mouse. The VHRFA-1 program has multiple functional modules: it first uses service provided by the IMGT/V-QUEST program to assign potential VH, DH, and JH germline genes; then, it searches for VH replacement footprint motifs within the VH-DH junction (N1) regions of IgH gene sequences to identify potential VH replacement products; it can also analyze the frequencies of VH replacement products in correlation with publications, keywords, or VH, DH, and JH gene usages, and mutation status; it can further analyze the amino acid usages encoded by the identified VH replacement footprints. In summary, this program provides a useful computation tool for exploring the biological significance of VH replacement products in human and mouse.

  5. Tooth anatomy

    Science.gov (United States)

    ... page: //medlineplus.gov/ency/article/002214.htm Tooth anatomy To use the sharing features on this page, ... upper jawbone is called the maxilla. Images Tooth anatomy References Lingen MW. Head and neck. In: Kumar ...

  6. Organogel as a replacement of saturated fat in food products

    Science.gov (United States)

    Organogels of edible oil have drawn a great interest as promising alternatives to saturated fats and trans fats. Plant waxes are recognized as promising organogelators, which can provide organogels from healthful vegetable oils at low concentrations. Plant waxes are obtained as by-products during th...

  7. Hydration of Biodentine, Theracal LC, and a prototype tricalcium silicate-based dentin replacement material after pulp capping in entire tooth cultures.

    Science.gov (United States)

    Camilleri, Josette; Laurent, Patrick; About, Imad

    2014-11-01

    The calcium-releasing ability of pulp-capping materials induces pulp tissue regeneration. Tricalcium silicate-based materials produce calcium hydroxide as a by-product of hydration. Assessment of hydration and calcium ion leaching is usually performed on samples that have been aged in physiological solution for a predetermined period of time. The hydration and activity of the materials in vivo may not be similar to those displayed in vitro because of insufficient fluid available in contact with dentin. The aim of this research was the assessment of hydration of Biodentine, Theracal LC, and a prototype radiopacified tricalcium silicate-based material after pulp capping and to compare it with direct hydration in an aqueous solution. The extent of hydration of Biodentine, Theracal LC, and a prototype radiopacified tricalcium silicate-based material with a similar composition to Biodentine but not incorporating the additives was assessed by scanning electron microscopy and energy dispersive spectroscopy of polished specimens after being allowed to hydrate in Hank's balanced salt solution for 14 days. The extent of hydration was compared with material hydration when used as direct pulp capping materials by using a tooth culture model. Material activity was also assessed by x-ray diffraction analysis to investigate the deposition of calcium hydroxide by the materials, and calcium ion leaching in Hank's balanced salt solution was assessed by ion chromatography. Biodentine and the prototype tricalcium silicate cement hydrated and reaction by-products were deposited in the cement matrix both after pulp capping and when incubated in an aqueous solution. Calcium hydroxide was formed, and calcium ions were leached in solution. Theracal LC hydration was incomplete because of the limited moisture diffusion within the material. Thus, no calcium hydroxide was produced, and a lower calcium ion leaching was recorded. Theracal LC had a heterogeneous structure with large unhydrated

  8. Replacing fossil based plastic performance products by bio-based plastic products-Technical feasibility.

    Science.gov (United States)

    van den Oever, Martien; Molenveld, Karin

    2017-07-25

    Larger scale market introduction of new bio-based products requires a clear advantage regarding sustainability, as well as an adequate techno-economic positioning relative to fossil based products. In a previous paper [Broeren et al., 2016], LCA results per kg and per functionality equivalent of bio-based plastics were presented, together with economic considerations. The present paper discusses the mechanical and thermal properties of a range of commercially available bio-based plastics based on polylactic acid (PLA), cellulose esters, starch and polyamides, and the feasibility of replacing fossil-based counterparts based on performance. The evaluation is approached from an end user perspective. First, potentially suitable bio-based plastics are selected based on manufacturers' specifications in technical data sheets, then a first experimental evaluation is performed on injection moulded ISO specimens, and finally a further selection of plastics is tested on large 50×70cm panels. This technical feasibility study indicates that so far bio-based plastics do not completely match the properties of high performance materials like flame retardant V-0 PC/ABS blends used in electronic devices. The performance gap is being decreased by the development of stereocomplex PLA and hybrid PLA blends with polycarbonate, which offer clearly improved properties with respect to maximum usage temperature and toughness. In addition, several materials meet the V-0 flammability requirements needed in specific durable applications. On the other hand, improving these properties so far has negative consequences for the bio-based content. This study also shows that replacement of bulk polymers like PS is feasible using PLA compounds with a bio-based content as high as 85%.

  9. Practical whole-tooth restoration utilizing autologous bioengineered tooth germ transplantation in a postnatal canine model

    Science.gov (United States)

    Ono, Mitsuaki; Oshima, Masamitsu; Ogawa, Miho; Sonoyama, Wataru; Hara, Emilio Satoshi; Oida, Yasutaka; Shinkawa, Shigehiko; Nakajima, Ryu; Mine, Atsushi; Hayano, Satoru; Fukumoto, Satoshi; Kasugai, Shohei; Yamaguchi, Akira; Tsuji, Takashi; Kuboki, Takuo

    2017-01-01

    Whole-organ regeneration has great potential for the replacement of dysfunctional organs through the reconstruction of a fully functional bioengineered organ using three-dimensional cell manipulation in vitro. Recently, many basic studies of whole-tooth replacement using three-dimensional cell manipulation have been conducted in a mouse model. Further evidence of the practical application to human medicine is required to demonstrate tooth restoration by reconstructing bioengineered tooth germ using a postnatal large-animal model. Herein, we demonstrate functional tooth restoration through the autologous transplantation of bioengineered tooth germ in a postnatal canine model. The bioengineered tooth, which was reconstructed using permanent tooth germ cells, erupted into the jawbone after autologous transplantation and achieved physiological function equivalent to that of a natural tooth. This study represents a substantial advancement in whole-organ replacement therapy through the transplantation of bioengineered organ germ as a practical model for future clinical regenerative medicine. PMID:28300208

  10. Tooth whitening today.

    Science.gov (United States)

    Sarrett, David C

    2002-11-01

    Methods to improve the esthetics of the dentition by tooth whitening are of interest to dentists, their patients and the public. In the past 20 years, research on bleaching and other methods of removing tooth discolorations has dramatically increased. Dentist-supervised and over-the-counter products now are available to solve a variety of tooth discoloration problems without restorative intervention. The indications for appropriate use of tooth-whitening methods and products are dependent on correct diagnosis of the discoloration. Tooth-whitening methods include the use of peroxide bleaching agents to remove internal discolorations or abrasive products to remove external stains. Peroxide bleaching procedures are completed by the dentist in single or multiple appointments, or by the patient over a period of weeks to months using custom trays loaded with a bleaching agent. Both methods are safe and effective when supervised by the dentist. Microabrasion is indicated for the removal of isolated discolorations that often are associated with fluorosis. Whitening toothpastes remove surface stains only through the polishing effect of the abrasives they contain. Tooth whitening is a form of dental treatment and should be completed as part of a comprehensive treatment plan developed by a dentist after an oral examination. When used appropriately, tooth-whitening methods are safe and effective.

  11. The influence of animal fat replacement with vegetable oils on sensorial perception of meat emulsified products

    Directory of Open Access Journals (Sweden)

    Cristian TUDOSE

    2014-12-01

    Full Text Available For the purpose of the present study, in an emulsified meat product the pork backfat was replaced with a vegetable oil pre-emulsion and its effect on quality attributes were investigated. In order to do so, a classic and a new meat products were manufactured. Extra virgin olive oil and palm oil pre-emulsion were added instead of animal fat in the new product. Texture and physiochemical properties were analyzed by instrumental measurements. It was observed that during storage moisture and pH decreased. Using vegetable oils determined substantial increase of TBA values. Texture was influenced mainly by storage time for both products, while replacement of pork backfat with vegetable oil pre-emulsion had no influence on sample firmness. The sensory properties of meat products were evaluated by a group of trained panelists using an analitycal sensory evaluation technique. Overall the new product presented good acceptability which recommends it like a new healthier meat product.

  12. Extent of tooth decay in the mouth and increased need for replacement of dental restorations: the New England Children's Amalgam Trial.

    Science.gov (United States)

    Trachtenberg, Felicia; Maserejian, Nancy Nairi; Tavares, Mary; Soncini, Jennifer Ann; Hayes, Catherine

    2008-01-01

    The purpose of this study was to assess the relationship between baseline caries experience and the restoration replacement rate in children. The 5-year New England Children's Amalgam Trial recruited 534 6- to 10-year-old children with 2 or more carious posterior teeth. The association between decoy and longevity of restorations was assessed. Restorations with no follow-up (N = 391) were excluded from analysis. The average follow-up was 3.0 +/- 1.6 years in 489 children. Restorations with follow-up (N = 3,604) were placed in mouths with a median of 15 dfs/DFS and 8 dft/DFT. The need for replacement increased significantly (P or = 14 dfs/DFS needed replacement, compared to 9% for 2 to 5 dfs/DFS. Comparing dft/DFT after 5 years of follow-up, there was a 23% replacement rate for > or = 12 dft/DFT compared to 10% for 2 to 3 dft/DFT. Decoy in the mouth had a greater association with the need for replacement due to new caries compared to replacement due to recurrent caries. Children with more decoy at the time of restoration placement were at higher risk for replacement of restorations.

  13. L-mimosine increases the production of vascular endothelial growth factor in human tooth slice organ culture model.

    Science.gov (United States)

    Trimmel, K; Cvikl, B; Müller, H-D; Nürnberger, S; Gruber, R; Moritz, A; Agis, H

    2015-03-01

    To assess the pro-angiogenic and pro-inflammatory capacity of the dentine-pulp complex in response to the prolyl hydroxylase inhibitor L-mimosine in a tooth slice organ culture model. Human teeth were sectioned transversely into 600-μm-thick slices and cultured in medium supplemented with serum and antibiotics. Then, pulps were stimulated for 48 h with L-mimosine. Pulps were subjected to viability measurements based on formazan formation in MTT assays. In addition, histological evaluation of pulps was performed based on haematoxylin and eosin staining. Culture supernatants were subjected to immunoassays for vascular endothelial growth factor (VEGF) to determine the pro-angiogenic capacity and to immunoassays for interleukin (IL)-6 and IL-8 to assess the pro-inflammatory response. Interleukin-1 served as pro-inflammatory control. Echinomycin was used to inhibit hypoxia-inducible factor-1 (HIF-1) alpha activity. Data were analysed using Student's t-test and Mann-Whitney U test. Pulps within tooth slices remained vital upon L-mimosine stimulation as indicated by formazan formation and histological evaluation. L-mimosine increased VEGF production when normalized to formazan formation in the pulp tissue of the tooth slices (P  0.05), whilst treatment with IL-1, which served as positive control, increased IL-6 (P model whilst inducing no prominent increase in IL-6 and IL-8. Pre-clinical studies will reveal if these in vitro effects translate into dental pulp regeneration. © 2014 International Endodontic Journal. Published by John Wiley & Sons Ltd.

  14. Use of Crushed Granite Fine as Replacement to River Sand in Concrete Production

    Directory of Open Access Journals (Sweden)

    Manasseh JOEL

    2010-12-01

    Full Text Available The suitability of Crushed granite fine (CGF to replace river sand in concrete production for use in rigid pavement was investigated. Slump, compressive and indirect tensile strength tests were performed on fresh and hardened concrete.28 days Peak compressive and indirect tensile strength values of 40.70N/mm2 and 2.30N/mm2 respectively was obtained, with the partial replacement of river sand with 20% CGF, as against values of 35.00N/mm2 and 1.75N/mm2, obtained with the use of river sand as fine aggregate. Based on economic analysis and results of tests, river sand replaced with 20% CGF is recommended for use in the production of concrete for use in rigid pavement. Conservation of river sand in addition to better ways of disposing wastes from the quarry sites are some of the merits of using CGF.

  15. Evaluation of the effect of tooth and dental restoration material on electron dose distribution and production of photon contamination in electron beam radiotherapy.

    Science.gov (United States)

    Bahreyni Toossi, Mohammad Taghi; Ghorbani, Mahdi; Akbari, Fatemeh; Mehrpouyan, Mohammad; Sobhkhiz Sabet, Leila

    2016-03-01

    The aim of this study is to evaluate the effect of tooth and dental restoration materials on electron dose distribution and photon contamination production in electron beams of a medical linac. This evaluation was performed on 8, 12 and 14 MeV electron beams of a Siemens Primus linac. MCNPX Monte Carlo code was utilized and a 10 × 10 cm(2) applicator was simulated in the cases of tooth and combinations of tooth and Ceramco C3 ceramic veneer, tooth and Eclipse alloy and tooth and amalgam restoration materials in a soft tissue phantom. The relative electron and photon contamination doses were calculated for these materials. The presence of tooth and dental restoration material changed the electron dose distribution and photon contamination in phantom, depending on the type of the restoration material and electron beam's energy. The maximum relative electron dose was 1.07 in the presence of tooth including amalgam for 14 MeV electron beam. When 100.00 cGy was prescribed for the reference point, the maximum absolute electron dose was 105.10 cGy in the presence of amalgam for 12 MeV electron beam and the maximum absolute photon contamination dose was 376.67 μGy for tooth in 14 MeV electron beam. The change in electron dose distribution should be considered in treatment planning, when teeth are irradiated in electron beam radiotherapy. If treatment planning can be performed in such a way that the teeth are excluded from primary irradiation, the potential errors in dose delivery to the tumour and normal tissues can be avoided.

  16. Placement of replace select Ti-Unite-coated type implants using a combination of immediate and submerge techniques after tooth extraction

    Directory of Open Access Journals (Sweden)

    Coen Pramono D

    2006-06-01

    Full Text Available The high success rate of immediate implant placement both in the anterior and posterior regions were reported by many authors, therefore applying this techniques can be considered as a safe surgical procedure and minimizing the dental office visit for patient satisfaction. This paper reports the outcome of immediate placement of implants following extraction of anterior maxillary teeth. Combination technique of immediate and submerge implant placements including bone grafting procedure were used. Four implants with TiUnite surface type were placed immediately in two patients with the short-term result indicated that this technique may serve as a simple and safe procedure for immediate implant placement. It was concluded that immediate implant placement technique combined with TiUnite implant surface was successful in treating region directly after tooth extraction therefore this technique can be use as an alternative surgical method for dental implant rehabilitation.

  17. Estimating ages of white-tailed deer: Age and sex patterns of error using tooth wear-and-replacement and consistency of cementum annuli

    Science.gov (United States)

    Samuel, Michael D.; Storm, Daniel J.; Rolley, Robert E.; Beissel, Thomas; Richards, Bryan J.; Van Deelen, Timothy R.

    2014-01-01

    The age structure of harvested animals provides the basis for many demographic analyses. Ages of harvested white-tailed deer (Odocoileus virginianus) and other ungulates often are estimated by evaluating replacement and wear patterns of teeth, which is subjective and error-prone. Few previous studies however, examined age- and sex-specific error rates. Counting cementum annuli of incisors is an alternative, more accurate method of estimating age, but factors that influence consistency of cementum annuli counts are poorly known. We estimated age of 1,261 adult (≥1.5 yr old) white-tailed deer harvested in Wisconsin and Illinois (USA; 2005–2008) using both wear-and-replacement and cementum annuli. We compared cementum annuli with wear-and-replacement estimates to assess misclassification rates by sex and age. Wear-and-replacement for estimating ages of white-tailed deer resulted in substantial misclassification compared with cementum annuli. Age classes of females were consistently underestimated, while those of males were underestimated for younger age classes but overestimated for older age classes. Misclassification resulted in an impression of a younger age-structure than actually was the case. Additionally, we obtained paired age-estimates from cementum annuli for 295 deer. Consistency of paired cementum annuli age-estimates decreased with age, was lower in females than males, and decreased as age estimates became less certain. Our results indicated that errors in the wear-and-replacement techniques are substantial and could impact demographic analyses that use age-structure information. 

  18. Tooth abscess

    Science.gov (United States)

    ... tissue swelling within the tooth. This causes a toothache . The toothache may stop if pressure is relieved. But the ... tissue. Symptoms The main symptom is a severe toothache. The pain is continuous. It does not stop. ...

  19. Test Tube Tooth: The Next Big Thing

    Science.gov (United States)

    Tahir, Mohammed; Yadav, Harsh; Sureka, Rakshit; Garg, Aarti

    2016-01-01

    Unlike some vertebrates and fishes, humans do not have the capacity for tooth regeneration after the loss of permanent teeth. Although artificial replacement with removable dentures, fixed prosthesis and implants is possible through advances in the field of prosthetic dentistry, it would be ideal to recreate a third set of natural teeth to replace lost dentition. For many years now, researchers in the field of tissue engineering have been trying to bioengineer dental tissues as well as whole teeth. In order to attain a whole tooth through dental engineering, that has the same or nearly same biological, mechanical and physical properties of a natural tooth, it’s necessary to deal with all the cells and tissues which are concerned with the formation, maintenance and repair of the tooth. In this article we review the steps involved in odontogenesis or organogenesis of a tooth and progress in the bioengineering of a whole tooth. PMID:27504430

  20. Groundnut shell ash as a partial replacement of cement in sandcrete blocks production

    Directory of Open Access Journals (Sweden)

    H. Mahmoud

    2012-12-01

    Full Text Available The production of sandcrete blocks using groundnut shell ash (GSA as cement replacement was investigated. Six number sandcrete blocks were cast for each replacement levels (0, 10,20,30,40, and 50 percentage with GSA. The blocks were cured and crushed at 7, 14, 21, and 28 days. The results show that the compressive strength ranges from 4.50 N/mm2 to 0.26N/mm2.The optimum replacement level was achieved at 20% with a corresponding strength of 3.58 N/mm2. The strength at the optimum level was within the recommended limit of the Nigerian Industrial Standard (NIS 87:2000. The results also showed that the strength decreases with increase of cement above 20% replacement. It was also observed that in the chemical composition of the GSA as compared to cement, the amount of K2O was higher in GSA and also CaO was less than what is obtained in cement.

  1. Early age shrinkage pattern of concrete on replacement of fine aggregate with industrial by-product

    Directory of Open Access Journals (Sweden)

    R.K. Mishra

    2016-10-01

    Full Text Available This is an experimental work carried out to investigate early age shrinkage pattern of concrete, prepared, on 50% replacement of industrial by-product (like pond ash and granulated blast furnace slag as fine aggregate using OPC, PPC and PSC as a binder. This is to observe the effect of pond ash and slag as they are having some cementitious properties and effect of cement type is also discussed. All the mixes were prepared keeping in view of pumpable concrete without any super plasticizers. Higher shrinkage value indicates the presence of more bleed water or internal moisture. It is concluded that slag is the best option for fine aggregate replacement for concrete making and durable structure.

  2. Studies on cocoa butter-replacer mixtures suitable for the local chocolate production.

    Directory of Open Access Journals (Sweden)

    El-Mallah, M. Hassan

    1998-12-01

    Full Text Available Mixtures of cocoa butter with different replacers, added at different levels, were prepared. From their properties, and particularly solid fat index, helped much in selecting the more suitable mixture for local chocolate production. It was found that cocoa butter-Illexao mixtures, at levels 10% and 15% replacer, gave more satisfactory results with respect to mouthfeel, hardness and brittleness.

    Se prepararon mezclas de manteca de cacao con diferentes sucedáneos añadidos en diferentes proporciones. Sus propiedades y particularmente el índice de grasa sólida, ayudaron mucho en la selección de la mezcla más adecuada para la producción de chocolate local. Se encontró que las mezclas con el 10% o 15% de lllexao en manteca de cacao, dieron los resultados más satisfactorios con respecto a la palatabilidad, dureza y consistencia.

  3. Proposal for a strategic planning for the replacement of products in stores based on sales forecast

    Directory of Open Access Journals (Sweden)

    Cassius Tadeu Scarpin

    2011-08-01

    Full Text Available This paper presents a proposal for strategic planning for the replacement of products in stores of a supermarket network. A quantitative method for forecasting time series is used for this, the Artificial Radial Basis Neural Networks (RBFs, and also a qualitative method to interpret the forecasting results and establish limits for each product stock for each store in the network. The purpose with this strategic planning is to reduce the levels of out-of-stock products (lack of products on the shelves, as well as not to produce overstocking, in addition to increase the level of logistics service to customers. The results were highly satisfactory reducing the Distribution Center (DC to shop out-of-stock levels, in average, from 12% to about 0.7% in hypermarkets and from 15% to about 1.7% in supermarkets, thereby generating numerous competitive advantages for the company. The use of RBFs for forecasting proved to be efficient when used in conjunction with the replacement strategy proposed in this work, making effective the operational processes.

  4. How to achieve synergy between volume replacement and filling products for global facial rejuvenation.

    Science.gov (United States)

    Raspaldo, Hervé; Aziza, Richard; Belhaouari, Lakhdar; Berros, Philippe; Body, Sylvie; Galatoire, Olivier; Le Louarn, Claude; Michaud, Thierry; Niforos, François; Rousseaux, Isabelle; Runge, Marc; Taieb, Maryna

    2011-04-01

    The objective of this paper is to provide an expert consensus regarding facial rejuvenation using a combination of volume replacement (Juvéderm(®) VOLUMA(®)), filling products (Juvéderm(®) Ultra product line) and botulinum toxin. The Juvéderm product line exploits innovative 3-D technology, producing a range of cohesive, homogenous gels that produce predictable, long-lasting and natural results. The products are easy to use by practitioners and are well-tolerated by patients, and used in combination can provide additional benefits not achieved with one product alone. An assessment of facial anatomy and consideration of the aging process, as well as available treatment options, are also addressed in determining the best combination of products to use. Outcomes from a questionnaire and workshop sessions focusing on specific aspects of use of the Juvéderm product line and botulinum toxin in daily clinical practice are discussed, and recommendations for product use following debate amongst the experts are provided.

  5. Can green consumerism replace environmental regulation? A differentiated-products example

    Energy Technology Data Exchange (ETDEWEB)

    Eriksson, Clas [Department of Economics, Swedish University of Agricultural Sciences, P.O. Box 7013, S-750 07 Uppsala (Sweden)

    2004-09-01

    This paper assumes that consumers are willing to pay an extra premium for a good if it has a low impact on the environment. We examine if a little dose of such idealistic behavior has a large impact on the market equilibrium, and to what extent it can replace the environmental regulation. The analysis is carried out in a model with product differentiation, where consumers differ in their preferences for product quality. Consumers' willingness to pay the environmental premium may be uniformly or non-uniformly distributed. Green consumerism will only be modestly influential in both cases, despite the fact that product differentiation leads to relaxed competition and increased profits, and thereby creates leverage.

  6. Replacement of missing anterior tooth using screw retained implant prosthesis in the esthetic zone: a case report with 3 years of follow up.

    Science.gov (United States)

    Ahmad, Manawar; Dhanasekar, B; Aparna, I N; Naim, Hina

    2014-09-01

    As more and more dental practitioners are focusing on implant-supported fixed restorations, some clinicians favor the use of cement retained restorations while others consider screw-retained prosthesis to be the best choice. As both types of prostheses have certain advantages and disadvantages, clinicians should be aware of the limitations of each type. Screw-retained implant restorations have an advantage of predictable retention, retrievability and lack of potentially retained sub-gingival cement. However, a few disadvantages exist such as precise placement of the implant for optimal and esthetic location of the screw access hole and obtaining passive fit. On the other hand, cement retained restorations eliminates unaesthetic screw access holes; have passive fit of castings; reduce stress to splinted implants because of minor misfit of the framework; reduced complexity of lab procedures; enhanced esthetics; reduced cost factors and non disrupted morphology of the occlusal table. This case report presents the replacement of missing left central incisor using screw-retained implant prosthesis due to palatal trajectory of the implant placement and inadequate abutment height for retention of cement retained prosthesis.

  7. Replacing fossil based plastic performance products by bio-based plastic products-Technical feasibility

    NARCIS (Netherlands)

    Oever, van den Martien; Molenveld, Karin

    2016-01-01

    Larger scale market introduction of new bio-based products requires a clear advantage regarding sustainability, as well as an adequate techno-economic positioning relative to fossil based products. In a previous paper [Broeren et al., 2016], LCA results per kg and per functionality equivalent of

  8. Replacing fossil based plastic performance products by bio-based plastic products-Technical feasibility

    NARCIS (Netherlands)

    Oever, van den Martien; Molenveld, Karin

    2017-01-01

    Larger scale market introduction of new bio-based products requires a clear advantage regarding sustainability, as well as an adequate techno-economic positioning relative to fossil based products. In a previous paper [Broeren et al., 2016], LCA results per kg and per functionality equivalent of bio

  9. Replacement of raw soybean with roasted soybean increased milk production in Holstein cows

    Directory of Open Access Journals (Sweden)

    Gilson Sebastião Dias Júnior

    Full Text Available ABSTRACT: The aim of this study was to evaluate the effect of total replacement of raw whole soybean (RAW for roastedwhole soybean (ROS on the production performance of Holstein cows. Two experiments were carried out usinga simple reversal design where RAW has been completely replaced by ROS. In experiment 1, 22 cows (175±60 days in milkwere used, and the dietary inclusion level of RAW or ROS was 3.7% of dry matter (DM. In experiment 2, 16 cows (130±50 days in milkwere used, and thedietary inclusion level of RAW or ROS was 11% of DM. In both experiments, ROS increased milk production by 1.1kgday-1 without changing fat and protein production. Dry matter intake or milk urea nitrogenwere not affected by dietary soy source. In experiment 2, plasma glucose concentration was decreased, and allantoin/creatinine ratio in urine tended to decreasein ROS. Experiment 2 also evaluated the nutrient digestibility and ruminal degradation kinetics of crude protein in two soybean sources. Roasting had no effect on the digestibility of DM, organic matter, and neutral detergent fiber. Roasted whole soybean hadgreater fraction B and lower protein degradation rate than did RAW; this showed that heat treatment was effective in increasing therumen undegradable amino acid flowto the animal, which suggesteda potential mechanism of action for improved performance observed in ROS.

  10. Pricing and inventory policies for Hi-tech products under replacement warranty

    Science.gov (United States)

    Tsao, Yu-Chung; Teng, Wei-Guang; Chen, Ruey-Shii; Chou, Wang-Ying

    2014-06-01

    Companies, especially in the Hi-tech (high-technology) industry (such as computer, communication and consumer electronic products), often provide a replacement warranty period for purchased items. In reality, simultaneously determining the price and inventory decisions under warranty policy is an important issue. The objective of this paper is to develop a joint pricing and inventory model for Hi-tech products under replacement warranty policy. In the first model, we consider a Hi-tech product feature in which the selling price is declining in a trend. We determine the optimal inventory level for each period and retail price for the first period while maximising the total profit. In the second model, we further determine the optimal retail price and inventory level for each period in the dynamic demand market. This study develops solution approaches to solve the problems described above. Numerical analysis discusses the influence of system parameters on the company's decisions and behaviours. The results of this study could serve as a reference for business managers or administrators.

  11. Growth performance of FH male calves fed milk replacer made of local ingredients for veal production

    Directory of Open Access Journals (Sweden)

    Elizabeth Wina

    1996-06-01

    Full Text Available The research was designed to evaluate the local feedstuff to be used in milk replacer (MP and its utilization for veal production . Fifteen male calves of the Friesian Holstein breed, 5-6 weeks old were used in the experiment lasting for 8 weeks. The treatments were (i commercial milk replacer (SPK, (ii local (SPL-1 and (iii mixture ofSPK and SPL-1 (SPKL. The amount of dry matter offerred is 3 % of live weight each and was given twice daily (in the morning and late afternoon . Elephant grass (0 .5 kg was offerred at noon . The observed parameters were average daily gain (ADG, dry matter (DM and crude protein (CP intake, carcass percentage, weight of carcass components, physical and chemical characteristics of meat. The results show that feed consumptions were 1,981, 1,613 and 1,050 g1day and ADGs were 897,496 and 73 g for treatments SPK, SPKL and SPL, respectively . Carcass percentage was 56.84 and 58 .76% with protein content was 87 .47 and 84 .78% for treatments SPK and SPKL, respectively . The benefit per head of calf was higher when fed mixture of local and commercial MP than fed only commercial MP but the benefit per day was higher when fed commercial MP than mixture of local and commercial. In conclusion, a cheaper milk replacer with less milk protein content resulting in a lower gain but higher benefit per head of calf than a commercial milk replacer containing high milk protein content

  12. Tooth wear

    Directory of Open Access Journals (Sweden)

    Tušek Ivan

    2014-01-01

    Full Text Available Tooth wear is the loss of dental hard tissue that was not caused by decay and represents a common clinical problem of modern man. In the etiology of dental hard tissue lesions there are three dominant mechanisms that may act synergistically or separately:friction (friction, which is caused by abrasion of exogenous, or attrition of endogenous origin, chemical dissolution of dental hard tissues caused by erosion, occlusal stress created by compression and flexion and tension that leads to tooth abfraction and microfracture. Wear of tooth surfaces due to the presence of microscopic imperfections of tooth surfaces is clinically manifested as sanding veneers. Tribology, as an interdisciplinary study of the mechanisms of friction, wear and lubrication at the ultrastructural level, has defined a universal model according to which the etiopathogenesis of tooth wear is caused by the following factors: health and diseases of the digestive tract, oral hygiene, eating habits, poor oral habits, bruxism, temporomandibular disorders and iatrogenic factors. Attrition and dental erosion are much more common in children with special needs (Down syndrome. Erosion of teeth usually results from diseases of the digestive tract that lead to gastroesophageal reflux (GER of gastric juice (HCl. There are two basic approaches to the assessment of the degree of wear and dental erosion. Depending on the type of wear (erosion, attrition, abfraction, the amount of calcium that was realised during the erosive attack could be determined qualitatively and quantitatively, or changes in optical properties and hardness of enamel could be recorded, too. Abrasion of teeth (abrasio dentium is the loss of dental hard tissue caused by friction between the teeth and exogenous foreign substance. It is most commonly provoked by prosthetic dentures and bad habits, while its effect depends on the size of abrasive particles and their amount, abrasive particle hardness and hardness of tooth

  13. Potential use of organogels to replace animal fat in comminuted meat products.

    Science.gov (United States)

    Barbut, S; Wood, J; Marangoni, A

    2016-12-01

    The replacement of beef fat (BF) with regular or structured canola oil [organogel produced with ethylcellulose (EC) 0.0%, 1.5% or 3.0% sorbitan monostearate (SMS)] was conducted in frankfurters. Substitution with regular oil doubled the hardness of the frankfurters relative to BF. Using an organogel prepared with 8% EC and 1.5 or 3.0% SMS resulted in a hardness value similar to that of BF, by both sensory and texture profile analysis. Without SMS addition, sensory results showed (Poil but still higher than BF. Gels prepared using higher EC concentrations (12 and 14%) yielded meat products with a higher sensory hardness than BF (Poil based frankfurters had very small fat globules compared to BF, but structuring the oil yielded larger fat globules. Color measurements indicated that oil-containing frankfurters were lighter than the ones with BF. Smokehouse yields were generally higher for canola oil and organogel containing treatments compared to the beef fat treatment. When SMS was included, fat losses increased over the canola oil treatment. The results demonstrate the possibility to use organogels to replace beef fat and depending on the formulation to manipulate textural properties to resemble traditional products but with lower saturated fat content.

  14. Study on starch replacement by pro-healthy fibers in puddings concentrate production

    Directory of Open Access Journals (Sweden)

    Magdalena Zychnowska

    2016-03-01

    Full Text Available In this study a possibility of inulin and polydextrose using in pro-healthy pudding production was investigated. Sensory evaluation and physical properties analysis such as apparent viscosity, hardness and colour components of experimental puddings were carried out. Fibers application decreased hardness and apparent viscosity of the analysed puddings. Inulin and polydextrose replacement did not significantly affects the brightness of the puddings, with the exception of appendix polydextrose (in quantities of 3.5 and 4%, which reduced their brightness. Based on extensive studies it was found that it is possible to use inulin and polydextrose in the production of chocolate puddings. Puddings with improved properties can be obtained with lower concentrations of the fibers.

  15. Utilization of agricultural by-products to partially replace gelatin in preparation of products for leather

    Science.gov (United States)

    When polyphenolic-modified gelatin-products were used as fillers, improvements were seen in the subjective properties of the leather. When the treated samples were compared to control samples, there were no significant changes in mechanical properties. At the present time, gelatin is in short supp...

  16. Mesenchymal Stem Cells and Tooth Engineering

    Institute of Scientific and Technical Information of China (English)

    Li Peng; Ling Ye; Xue-dong Zhou

    2009-01-01

    Tooth loss compromises human oral health. Although several prosthetic methods, such as artificial denture and dental implants, are clinical therapies to tooth loss problems, they are thought to have safety and usage time issues. Recently, tooth tissue engineering has attracted more and more attention. Stem cell based tissue engineering is thought to be a promising way to replace the missing tooth. Mesenchymal stem cells (MSCs) are multipotent stem cells which can differentiate into a variety of cell types. The potential MSCs for tooth regeneration mainly include stem cells from human exfoliated deciduous teeth (SHEDs), adult dental pulp stem cells (DPSCs), stem cells from the apical part of the papilla (SCAPs), stem cells from the dental follicle (DFSCs), periodontal ligament stem cells (PDLSCs) and bone marrow derived mesenchymal stem cells (BMSCs). This review outlines the recent progress in the mesenchymal stem cells used in tooth regeneration.

  17. Common developmental pathways link tooth shape to regeneration.

    Science.gov (United States)

    Fraser, Gareth J; Bloomquist, Ryan F; Streelman, J Todd

    2013-05-15

    In many non-mammalian vertebrates, adult dentitions result from cyclical rounds of tooth regeneration wherein simple unicuspid teeth are replaced by more complex forms. Therefore and by contrast to mammalian models, the numerical majority of vertebrate teeth develop shape during the process of replacement. Here, we exploit the dental diversity of Lake Malawi cichlid fishes to ask how vertebrates generally replace their dentition and in turn how this process acts to influence resulting tooth morphologies. First, we used immunohistochemistry to chart organogenesis of continually replacing cichlid teeth and discovered an epithelial down-growth that initiates the replacement cycle via a labial proliferation bias. Next, we identified sets of co-expressed genes from common pathways active during de novo, lifelong tooth replacement and tooth morphogenesis. Of note, we found two distinct epithelial cell populations, expressing markers of dental competence and cell potency, which may be responsible for tooth regeneration. Related gene sets were simultaneously active in putative signaling centers associated with the differentiation of replacement teeth with complex shapes. Finally, we manipulated targeted pathways (BMP, FGF, Hh, Notch, Wnt/β-catenin) in vivo with small molecules and demonstrated dose-dependent effects on both tooth replacement and tooth shape. Our data suggest that the processes of tooth regeneration and tooth shape morphogenesis are integrated via a common set of molecular signals. This linkage has subsequently been lost or decoupled in mammalian dentitions where complex tooth shapes develop in first generation dentitions that lack the capacity for lifelong replacement. Our dissection of the molecular mechanics of vertebrate tooth replacement coupled to complex shape pinpoints aspects of odontogenesis that might be re-evolved in the lab to solve problems in regenerative dentistry.

  18. Common developmental pathways link tooth shape to regeneration

    Science.gov (United States)

    Fraser, Gareth J.; Bloomquist, Ryan F.; Streelman, J. Todd

    2013-01-01

    In many non-mammalian vertebrates, adult dentitions result from cyclical rounds of tooth regeneration wherein simple unicuspid teeth are replaced by more complex forms. Therefore and by contrast to mammalian models, the numerical majority of vertebrate teeth develop shape during the process of replacement. Here, we exploit the dental diversity of Lake Malawi cichlid fishes to ask how vertebrates generally replace their dentition and in turn how this process acts to influence resulting tooth morphologies. First, we used immunohistochemistry to chart organogenesis of continually replacing cichlid teeth and discovered an epithelial down-growth that initiates the replacement cycle via a labial proliferation bias. Next, we identified sets of co-expressed genes from common pathways active during de novo, lifelong tooth replacement and tooth morphogenesis. Of note, we found two distinct epithelial cell populations, expressing markers of dental competence and cell potency, which may be responsible for tooth regeneration. Related gene sets were simultaneously active in putative signaling centers associated with the differentiation of replacement teeth with complex shapes. Finally, we manipulated targeted pathways (BMP, FGF, Hh, Notch, Wnt/β-catenin) in vivo with small molecules and demonstrated dose-dependent effects on both tooth replacement and tooth shape. Our data suggest that the processes of tooth regeneration and tooth shape morphogenesis are integrated via a common set of molecular signals. This linkage has subsequently been lost or decoupled in mammalian dentitions where complex tooth shapes develop in first generation dentitions that lack the capacity for lifelong replacement. Our dissection of the molecular mechanics of vertebrate tooth replacement coupled to complex shape pinpoints aspects of odontogenesis that might be re-evolved in the lab to solve problems in regenerative dentistry. PMID:23422830

  19. Whole Tooth Regeneration as a Future Dental Treatment.

    Science.gov (United States)

    Oshima, Masamitsu; Tsuji, Takashi

    2015-01-01

    Dental problems caused by dental caries, periodontal disease and tooth injury compromise the oral and general health issues. Current advances for the development of regenerative therapy have been influenced by our understanding of embryonic development, stem cell biology, and tissue engineering technology. Tooth regenerative therapy for tooth tissue repair and whole tooth replacement is currently expected a novel therapeutic concept with the full recovery of tooth physiological functions. Dental stem cells and cell-activating cytokines are thought to be candidate approach for tooth tissue regeneration because they have the potential to differentiate into tooth tissues in vitro and in vivo. Whole tooth replacement therapy is considered to be an attractive concept for next generation regenerative therapy as a form of bioengineered organ replacement. For realization of whole tooth regeneration, we have developed a novel three-dimensional cell manipulation method designated the "organ germ method". This method involves compartmentalisation of epithelial and mesenchymal cells at a high cell density to mimic multicellular assembly conditions and epithelial-mesenchymal interactions in organogenesis. The bioengineered tooth germ generates a structurally correct tooth in vitro, and erupted successfully with correct tooth structure when transplanted into the oral cavity. We have ectopically generated a bioengineered tooth unit composed of a mature tooth, periodontal ligament and alveolar bone, and that tooth unit was engrafted into an adult jawbone through bone integration. Bioengineered teeth were also able to perform physiological tooth functions such as mastication, periodontal ligament function and response to noxious stimuli. In this review, we describe recent findings and technologies underpinning whole tooth regenerative therapy.

  20. Effect of non-forage roughage replacement on feeding behaviour and milk production in dairy cows

    Directory of Open Access Journals (Sweden)

    Igino Andrighetto

    2011-10-01

    Full Text Available The objective of this study was to determine whether the partial replacement of roughage from forage with non-forage fiber sources, in a total mixed ration (TMR, could reduce feed sorting by dairy cows without modifying behaviour and milk production. Twelve Holstein cows were fed two TMR maize silage based diets in a cross-over experiment. Compared to the control diet (C-diet, experimental diet (E-diet was formulated by replacing 8% neutral detergent fibre (NDF from straw and alfalfa hay with soybean hulls and wheat bran. E-diet had a lower physical effectiveness factor (pef (0.37 vs 0.34; Pvs 14.6%; Pvs. 178 min/d; P<0.05 but showed the same number of meals per day. C-diet fed cows sorted against peNDF in a greater extent (98.3 100.9%; P<0.05. Treatments did not affect cows time budget of general behaviors, with particular regard to ruminating activity. Despite different forage sources in TMR, no significant differences in milk yield and quality were detected.

  1. The Modelling Of Basing Holes Machining Of Automatically Replaceable Cubical Units For Reconfigurable Manufacturing Systems With Low-Waste Production

    Science.gov (United States)

    Bobrovskij, N. M.; Levashkin, D. G.; Bobrovskij, I. N.; Melnikov, P. A.; Lukyanov, A. A.

    2017-01-01

    Article is devoted the decision of basing holes machining accuracy problems of automatically replaceable cubical units (carriers) for reconfigurable manufacturing systems with low-waste production (RMS). Results of automatically replaceable units basing holes machining modeling on the basis of the dimensional chains analysis are presented. Influence of machining parameters processing on accuracy spacings on centers between basing apertures is shown. The mathematical model of carriers basing holes machining accuracy is offered.

  2. Dental Caries (Tooth Decay)

    Science.gov (United States)

    ... Find Data by Topic > Dental Caries (Tooth Decay) Dental Caries (Tooth Decay) Main Content Dental caries (tooth decay) remains the most prevalent chronic ... important source of information on oral health and dental care in the United States since the early ...

  3. Seal Out Tooth Decay

    Science.gov (United States)

    ... Decay (Caries) > Seal Out Tooth Decay Seal Out Tooth Decay Main Content What are dental sealants? How are ... fix decayed teeth. Back to Top What causes tooth decay? Germs in the mouth use the sugar in ...

  4. Use of viscera extract from hybrid catfish (Clarias macrocephalus × Clarias gariepinus) for the production of protein hydrolysate from toothed ponyfish (Gazza minuta) muscle.

    Science.gov (United States)

    Klomklao, Sappasith; Kishimura, Hideki; Benjakul, Soottawat

    2013-01-15

    Proteolytic activity of viscera extract from hybrid catfish (Clarias macrocephalus × Clarias gariepinus) was studied. The optimal pH and temperature were 9.0 and 50°C, respectively, when toothed ponyfish (Gazza minuta) muscle was used as a substrate. When viscera extract from hybrid catfish was used for the production of protein hydrolysate from toothed ponyfish muscle, extract concentration, reaction time, and fish muscle/buffer ratio affected the hydrolysis and nitrogen recovery (NR) (p<0.05). Optimum conditions for toothed ponyfish muscle hydrolysis were 3.5% hybrid catfish viscera extract, 15 min reaction time and fish muscle/buffer ratio of 1:3 (w/v). High correlation between the degree of hydrolysis (DH) and NR (R(2)=0.974) was observed. Freeze-dried hydrolysate had a high protein content (89.02%, dry weight basis) and it was brownish yellow in colour (L(∗)=63.67, a(∗)=6.33, b(∗)=22.41). The protein hydrolysate contained a high amount of essential amino acids (48.22%) and had arginine and lysine as the dominant amino acids.

  5. Nicotine replacement therapy, tobacco products, and electronic cigarettes in pharmacies in St. Louis, Missouri.

    Science.gov (United States)

    Barnoya, Joaquin; Jin, Linda; Hudmon, Karen Suchanek; Schootman, Mario

    2015-01-01

    To compare availability of nicotine replacement therapy (NRT), tobacco products, and electronic cigarettes (e-cigarettes) in pharmacies in St. Louis, MO. Cross-sectional study, on-site store audits of 322 pharmacies. St. Louis, MO. 242 eligible community pharmacies located in the study area. Pharmacies were visited by trained research assistants who conducted a 5- to 10-minute store audit using a paper-based data collection tool. Availability, accessibility, and pricing of NRT as a function of neighborhood poverty rate and proportion of black residents as well as availability of tobacco products and e-cigarettes. NRT availability decreased as neighborhood poverty rate increased (P = 0.02). Availability without pharmacy personnel assistance also decreased with increasing poverty rate (r = -0.19; 95% CI = -0.06, -0.31) and higher percentage of black residents (r = -0.18; 95% CI = -0.06, -0.31). Prices were lower in neighborhoods with higher poverty rates (P = 0.02) and a higher percentage of black residents (P = 0.03). E-cigarettes were available in 43% of pharmacies, and their availability and price did not differ by poverty rate or percentage of black residents. Low access to NRT might perpetuate smoking disparities in disadvantaged and racially diverse neighborhoods. Study data support policies to ensure equal NRT access to reduce disparities.

  6. Effect of sugarcane silage on productive parameters of replacement Holstein-Friesian heifers

    Directory of Open Access Journals (Sweden)

    José Reyes G.

    2014-03-01

    Full Text Available Objective. Measure the productive parameters of Holstein-Friesian females from weaning to 470 days old, comparing feeding through sugarcane silage (SCS and corn silage (CS in a concentrated fodder ratio of 70:30. Materials and methods. Twenty-eight post-weaning calves were used, with an average age of 80±16 days old and an initial weight of 79.5±12.9 kg. The T-Student test was used for the comparison of means, where calves were divided into two groups of 14, one for each treatment. The body weight BW (kg, wither height WH (cm, body condition BC (1 to 5 scale, daily weight gain DWG (kg and feed conversion FC (kg was measured every 30 days. Results. Differences were found between treatments, where heifers fed with SCS showed better BC (3.12, FC (7.4 as compared to the CS treatment. No significant differences were found in terms of DWG (0.666 and 0.743 kg/d. Conclusions. Feeding based on sugarcane silage allows for an improved body condition and feed conversion of animals having with this an acceptable and cost-effective production performance in the raising of dairy replacements.

  7. Cutting blade dentitions in squaliform sharks form by modification of inherited alternate tooth ordering patterns

    Science.gov (United States)

    Underwood, Charlie; Johanson, Zerina; Smith, Moya Meredith

    2016-11-01

    The squaliform sharks represent one of the most speciose shark clades. Many adult squaliforms have blade-like teeth, either on both jaws or restricted to the lower jaw, forming a continuous, serrated blade along the jaw margin. These teeth are replaced as a single unit and successor teeth lack the alternate arrangement present in other elasmobranchs. Micro-CT scans of embryos of squaliforms and a related outgroup (Pristiophoridae) revealed that the squaliform dentition pattern represents a highly modified version of tooth replacement seen in other clades. Teeth of Squalus embryos are arranged in an alternate pattern, with successive tooth rows containing additional teeth added proximally. Asynchronous timing of tooth production along the jaw and tooth loss prior to birth cause teeth to align in oblique sets containing teeth from subsequent rows; these become parallel to the jaw margin during ontogeny, so that adult Squalus has functional tooth rows comprising obliquely stacked teeth of consecutive developmental rows. In more strongly heterodont squaliforms, initial embryonic lower teeth develop into the oblique functional sets seen in adult Squalus, with no requirement to form, and subsequently lose, teeth arranged in an initial alternate pattern.

  8. Productive effects of whole milk and milk replacement formula in calves feeding

    Directory of Open Access Journals (Sweden)

    Ivana Klarić

    2009-12-01

    Full Text Available Determination of correct feeding regimes for calves is very important as it directly influences calves’ productive and reproductive traits, as well as duration of adult animal exploitation period. As the liquid feed is the most expensive component, its importance also has an economic aspect in calves rearing. The experiment was carried out on 30 Holstein calves with the aim to determine productive, economic and health effects of feeding calves with whole milk in different periods. Calves were divided into three equal groups (10 calves in each group. Experiment was carried out in the period from calving up to the 60th day of calf ’s age. All groups were given whole milk, however, duration of whole milk feeding differed among groups. Group 1 consumed whole milk from birth up to the 30th day of age, group 2 from birth up to the 20th day of age and group 3 from birth up to the 10th day of age. Afterwards, all groups were fed with milk replacement formula up to the 60th day of age. Suggested technological solutions in calves feeding within this experiment were analyzed through evaluation of basic fattening characteristics, monitoring of diarrhea occurrences and calculating costs per kg of weight gain per each group. Statistical analysis referring to calves body weight, daily gain and liquid feed conversion during the 1st month of experiment proved the best values for group 1, which were statistically highly significant (P<0.01 if compared to other groups. Examination of health status of calves determined that diarrhea occurred less frequently in group 1, which led to conclusion that feeding whole milk to calves should be given priority with respect to its nutritive and health benefits. By analyzing economic aspect of feeding whole milk to calves in their 1st month of age, the lowest costs were obtained for group 1, which supports the fact that feeding calves with whole milk is cost effective.

  9. Partial and total fish meal replacement by agricultural products in the diets improve sperm quality in African catfish (Clarias gariepinus)

    NARCIS (Netherlands)

    Nyina-wamwiza, L.; Milla, S.; Pierrard, M.A.; Rurangwa, E.; Mandiki, S.N.M.; Look, van K.J.W.; Kestemont, P.

    2012-01-01

    This study investigated the long-term effects of total and partial replacement of dietary fish meal (FM) by a mixture of agricultural products on sperm quality of African catfish Clarias gariepinus. Four isonitrogenous and isoenergetic diets were formulated containing graded levels of either 50% FM

  10. Effects of replacing maize with mango seed kernel meal on performance, carcass characteristics and economic of production of weaner rabbits

    OpenAIRE

    N. Saleh; K.M. Bello

    2015-01-01

    An experiment was conducted to examine the effect of replacing maize with mango seed kernel meal (MSKM) in the diets of Weaner rabbit on performance, carcass characteristics and economic of production. Twenty mongrel rabbits were randomly allocated to four diets in which mango seed kernel meal replaced maize at 0, 33.33, 66.67 and 100% level designed as diets 1, 2, 3 and 4 respectively. The daily feed intake (42.75-49.76), daily weight gain (8.75-9.72) and feed conversion ratio (4.64-5.19) ob...

  11. The dam replacing gene product enhances Neisseria gonorrhoeae FA1090 viability and biofilm formation.

    Science.gov (United States)

    Kwiatek, Agnieszka; Bacal, Pawel; Wasiluk, Adrian; Trybunko, Anastasiya; Adamczyk-Poplawska, Monika

    2014-01-01

    Many Neisseriaceae do not exhibit Dam methyltransferase activity and, instead of the dam gene, possess drg (dam replacing gene) inserted in the leuS/dam locus. The drg locus in Neisseria gonorrhoeae FA1090 has a lower GC-pairs content (40.5%) compared to the whole genome of N. gonorrhoeae FA1090 (52%). The gonococcal drg gene encodes a DNA endonuclease Drg, with GmeATC specificity. Disruption of drg or insertion of the dam gene in gonococcal genome changes the level of expression of genes as shown by transcriptome analysis. For the drg-deficient N. gonorrhoeae mutant, a total of 195 (8.94% of the total gene pool) genes exhibited an altered expression compared to the wt strain by at least 1.5 fold. In dam-expressing N. gonorrhoeae mutant, the expression of 240 genes (11% of total genes) was deregulated. Most of these deregulated genes were involved in translation, DNA repair, membrane biogenesis and energy production as shown by cluster of orthologous group analysis. In vivo, the inactivation of drg gene causes the decrease of the number of live neisserial cells and long lag phase of growth. The insertion of dam gene instead of drg locus restores cell viability. We have also shown that presence of the drg gene product is important for N. gonorrhoeae FA1090 in adhesion, including human epithelial cells, and biofilm formation. Biofilm produced by drg-deficient strain is formed by more dispersed cells, compared to this one formed by parental strain as shown by scanning electron and confocal microscopy. Also adherence assays show a significantly smaller biomass of formed biofilm (OD570 = 0.242 ± 0.038) for drg-deficient strain, compared to wild-type strain (OD570 = 0.378 ± 0.057). Dam-expressing gonococcal cells produce slightly weaker biofilm with cells embedded in an extracellular matrix. This strain has also a five times reduced ability for adhesion to human epithelial cells. In this context, the presence of Drg is more advantageous for N. gonorrhoeae biology than

  12. Does chochos (L. mutabilis) production have the potential to increase farm revenues and contribute to food security if it replaces soybean or maize production in Ecuador?

    OpenAIRE

    2015-01-01

    Chochos (L. mutabilis) production does not satisfy Ecuador’s demand. Therefore, this paper intends to find if chochos production have the potential to increase farmers revenue and contribute to food security if it replaces maize and soybeans, while assuming three scenarios for chochos production that influence farmers revenue. If so, how would it affect the land use change in terms of food security? A gross margin calculation with three scenarios—current, double and triple revenue—for choc...

  13. In vitro degradability and total gas production of biodiesel chain byproducts used as a replacement for cane sugar feed

    Directory of Open Access Journals (Sweden)

    Milenna Nunes Moreira

    2014-09-01

    Full Text Available This study aimed to determine the in vitro degradability of dry matter and the total gas production of oil seed press cake from biodiesel production (Gossypium hirsutum L., Helianthus annuus L., Ricinus communis, Moringa oleífera L. and Pinhão manso curcas L. at four different levels of replacement (0, 30, 50, and 70% for cane sugar (Saccharum officinarum RB. in ruminant feed. Inocula were prepared using the ruminal fluid of three Holstein cows, and data were collected after 48 hours of incubation. The byproducts of Moringa had the highest degradability, and castor presented the lowest values at all evaluated levels of replacement. Castor bean byproduct showed the highest total gas production, cotton showed the lowest production, and the byproduct of Moringa at the 70% level showed the best ruminal fermentation results. These results demonstrate that the use of oil seed press cake from biodiesel production (Helianthus annuus L. and Ricinus communis can replace cane sugar in ruminant feed.

  14. Replacement of Natural Fine Aggregate With Air Cooled Blast Furnace Slag An Industrial By Product

    Directory of Open Access Journals (Sweden)

    Dr. B. Krishna Rao

    2015-07-01

    Full Text Available The aim of the investigation is to replace natural fine aggregatewith Air Cooled Blast Furnace Slag in OPC concrete. At present, nearly million tons of slag is being produced in the steel plants, in India. The generation of slag would be dual problem in disposal difficulty and environmental pollution. Some strategies should be used to utilize the slag effectively. Considering physical properties of metallurgical slags and a series of possibilities for their use in the field of civil constructions, this report demonstrates the possibilities of using air cooled blast furnace slag as partial replacement of sand in concrete. A total of five concrete mixes, containing 0%, 12.5%, 25%, 37.5% and 50% partial replacement of regular sand with air cooled blast furnace slag are investigated in the laboratory. These mixes were tested to determine axial compressive strength, split tensile strength, and flexural strength for 7days, 28days, 56days and 90days.

  15. Soybean hulls replacing ground corn in diets for early lactation Saanen goats: intake, digestibility, milk production and quality

    Directory of Open Access Journals (Sweden)

    Maximiliane Alavarse Zambom

    2012-06-01

    Full Text Available The objective of this study was to evaluate productive performance and milk quality of Saanen goats fed diets with soybean hulls replacing ground corn (0, 50 and 100% replacement in early lactation (from birth to 50 days of lactation. Fourteen goats (72.30±9.14 kg of BW were used in a completely randomized design. Animals were confined in individual stalls, with daily control of feed intake and milk production. On the 30th day of lactation, fecal sampling started in order to determine nutrients digestibility. Every month, milk samples were collected for analyses of fat, protein, lactose and total solid percentage, somatic cell count, N-urea, acidity, density and also milk fatty acid profile. No differences were observed between diets for body weight, daily weight gain and intake (kg/day of dry matter, organic matter, crude protein or indigestible neutral detergent fiber. However, for neutral detergent fiber intake, the diet with complete substitution presented the best results. Cocerning digestibility coefficients of dry matter and nutrients (organic matter, crude protein and neutral detergent fiber the diet with 100% replacement also presented the best results. For milk production, milk production efficiency and milk composition, no difference was observed between diets. For milk fatty acid profile, there were differences between diets for some fatty acids. Soybean hulls can be used replacing ground corn in diets for Saanen goats in the early lactation, because it improves the digestibility of the diet and nutrients, does not change productive performance or the milk physical-chemical quality and increases the content of n-3 fatty acids in milk.

  16. Effects of partly replacing dietary starch with fiber and fat on milk production and energy partitioning.

    Science.gov (United States)

    Boerman, J P; Potts, S B; VandeHaar, M J; Lock, A L

    2015-10-01

    The effects of partly replacing dietary starch with fiber and fat to provide a diet with similar net energy for lactation (NEL) density on yields of milk and milk components and on energy partitioning were evaluated in a crossover design experiment. Holstein cows (n = 32; 109 ± 22 d in milk, mean ± standard deviation) were randomly assigned to treatment sequence. Treatments were a high-starch diet containing 33% corn grain (mixture of dry ground and high-moisture corn; HS) or a high-fiber, high-fat diet containing 2.5% palmitic acid-enriched fatty acid (FA) supplement (HFF). Diets contained corn silage, alfalfa silage, and wheat straw as forage sources; HS contained 32% starch, 3.2% FA, and 25% neutral detergent fiber, whereas HFF contained 16% starch, 5.4% FA, and 33% neutral detergent fiber. Compared with HS, the HFF treatment reduced milk yield, milk protein concentration, and milk protein yield, but increased milk fat concentration, milk fat yield, milk energy output, and milk to feed ratio (energy-corrected milk/dry matter intake). The HFF treatment reduced the yield of de novo synthesized ( 16-carbon) milk FA was not different. The HFF treatment increased plasma concentrations of triglycerides and nonesterified fatty acids, but decreased plasma concentration of insulin. Compared with HS, the HFF treatment reduced body weight gain, change in body condition score, and fat thickness over the rump and rib. Calculated body energy gain, as a fraction of NEL use, was less for HFF than HS, whereas milk energy as a fraction of NEL use was increased for HFF. We concluded that the 2 treatments resulted in similar apparent NEL densities and intakes, but the HS treatment partitioned more energy toward body gain whereas the HFF treatment partitioned more energy toward milk. A high-fiber, high-fat diet might diminish the incidence of over conditioning in mid-lactation cows while maintaining high milk production. Copyright © 2015 American Dairy Science Association

  17. Immediate Esthetic Rehabilitation of Periodontally Compromised Anterior Tooth Using Natural Tooth as Pontic

    Directory of Open Access Journals (Sweden)

    K. Pavan Kumar

    2016-01-01

    Full Text Available For patients who require removal of anterior teeth and their replacement various treatment modalities are available. With advancement in technology and availability of glass/polyethylene fibres, use of natural tooth as pontic with fibre reinforced composite restorations offers the promising results. The present case report describes management of periodontally compromised mandibular anterior tooth using natural tooth pontic with fibre reinforcement. A 1-year follow-up showed that the bridge was intact with good esthetics and no problem was reported.

  18. Cavities/Tooth Decay

    Science.gov (United States)

    Cavities/tooth decay Overview By Mayo Clinic Staff Cavities are permanently damaged areas in the hard surface of your teeth ... into tiny openings or holes. Cavities, also called tooth decay or caries, are caused by a combination of ...

  19. Intracranial supernumerary tooth

    Energy Technology Data Exchange (ETDEWEB)

    Sjoeberg, S.; Loerinc, P.

    1984-12-01

    Case report of an accidentally diagnosed supernumerary tooth in the superior orbital fissure. Computed tomography (CT) contributed with a more precise localization of the tooth being situated between the orbit and the brain. CT also showed that there was no cyst or other pathological process around the supernumerary tooth, which is plausible and frequently reported in the literature.

  20. Tooth sensitivity and whitening.

    Science.gov (United States)

    Swift, Edward J

    2005-09-01

    This article presents a review of the basic concepts of tooth sensitivity and how those concepts apply to cervical dentin hypersensitivity and the sensitivity frequently associated with tooth whitening. The etiology and treatment of cervical dentin hypersensitivity are described. The clinical presentation, incidence, and predisposing factors for sensitivity associated with tooth whitening also are discussed.

  1. In vitro degradability and total gas production of biodiesel chain byproducts used as a replacement for cane sugar feed

    OpenAIRE

    2014-01-01

    This study aimed to determine the in vitro degradability of dry matter and the total gas production of oil seed press cake from biodiesel production (Gossypium hirsutum L., Helianthus annuus L., Ricinus communis, Moringa oleífera L. and Pinhão manso curcas L.) at four different levels of replacement (0, 30, 50, and 70%) for cane sugar (Saccharum officinarum RB.) in ruminant feed. Inocula were prepared using the ruminal fluid of three Holstein cows, and data were collected after 48 hours of in...

  2. Accumulation of VH Replacement Products in IgH Genes Derived from Autoimmune Diseases and Anti-Viral Responses in Human.

    Science.gov (United States)

    Lange, Miles D; Huang, Lin; Yu, Yangsheng; Li, Song; Liao, Hongyan; Zemlin, Michael; Su, Kaihong; Zhang, Zhixin

    2014-01-01

    VH replacement refers to RAG-mediated secondary recombination of the IgH genes, which renews almost the entire VH gene coding region but retains a short stretch of nucleotides as a VH replacement footprint at the newly generated VH-DH junction. To explore the biological significance of VH replacement to the antibody repertoire, we developed a Java-based VH replacement footprint analyzer program and analyzed the distribution of VH replacement products in 61,851 human IgH gene sequences downloaded from the NCBI database. The initial assignment of the VH, DH, and JH gene segments provided a comprehensive view of the human IgH repertoire. To our interest, the overall frequency of VH replacement products is 12.1%; the frequencies of VH replacement products in IgH genes using different VH germline genes vary significantly. Importantly, the frequencies of VH replacement products are significantly elevated in IgH genes derived from different autoimmune diseases, including rheumatoid arthritis, systemic lupus erythematosus, and allergic rhinitis, and in IgH genes encoding various autoantibodies or anti-viral antibodies. The identified VH replacement footprints preferentially encoded charged amino acids to elongate IgH CDR3 regions, which may contribute to their autoreactivities or anti-viral functions. Analyses of the mutation status of the identified VH replacement products suggested that they had been actively involved in immune responses. These results provide a global view of the distribution of VH replacement products in human IgH genes, especially in IgH genes derived from autoimmune diseases and anti-viral immune responses.

  3. Production of healthier bologna type sausages using pork skin and green banana flour as a fat replacers.

    Science.gov (United States)

    Alves, Larissa Aparecida Agostinho Dos Santos; Lorenzo, José Manuel; Gonçalves, Carlos Antonio Alvarenga; Santos, Bibiana Alves Dos; Heck, Rosane Teresinha; Cichoski, Alexandre José; Campagnol, Paulo Cezar Bastianello

    2016-11-01

    The effect of pork skin (PS) and green banana flour (GBF) on the physicochemical, technological, microbiological, and sensory properties of Bologna-type sausages was assessed. For this propose, six batches were manufactured: control (formulated with 20% fat) and five treatments replacing 20%, 40%, 60%, 80%, and 100% of pork-fat by a mixture of PS, water, and GBF (1:2:2). Fat contents significantly (P0.05) on color (L*, a*, b*, and whiteness), texture parameters, and sensory acceptability. Therefore, healthier Bologna type sausages could be produced by replacing up to 60% of the fat with a mixture of PS, water, and GBF without depreciating product's quality. Copyright © 2016 Elsevier Ltd. All rights reserved.

  4. Production performance of finisher broiler fed with cocoyam-corm meal as partial energy replacement for maize

    Directory of Open Access Journals (Sweden)

    Christian Paul P. de la Cruz

    2016-10-01

    Full Text Available Aim: The objective of this study was to evaluate the potential of Gabing San Fernando (Xanthosoma spp. corms as partial carbohydrate replacement for maize in finisher broiler production. Materials and Methods: The completely randomized design was utilized to investigate the effects of three finisher poultry diets prepared in varying amounts of cocoyam-corm meal set at 0% (control, 25%, and 50% (experimental replacement levels. Results: There were no significant differences (p≥0.05 as to mortality and body weight measurements between control and experimental groups. Similarly, the mean weights of selected internal organs and condemnable carcasses among treatment groups did not show any significant differences (p≥0.05. In terms of the average feed intakes, birds from 50%-cocoyam group had the highest mean value and were found to be statistically different (p≥0.01 from both control and 25%-cocoyam groups. However, feed conversion ratio did not significantly differ (p≥0.05 among three groups. Higher feed costs were associated with the 50%-cocoyam treatment diet, which was only consistent with higher feed inputs. Thus, the group fed with 50%-cocoyam meal had significantly higher total mean production costs (p<0.005 per bird, when other expenses were taken into account. The production costs for the group given 25%-cocoyam meal did not significantly differ (p≥0.05 from the control group. Conclusion: Partial replacement of maize with cocoyam-corm meal at 25% level was acceptable since inclusion at this level did not adversely affect the production performance of finisher broilers in terms of growth rate, mortality rate, and feeding efficiency. The use of cocoyam meal as nonconventional and alternative carbohydrate source in poultry diet presents positive economic implications, especially to smallhold farmers from the developing countries, like the Philippines.

  5. Polymer Waste Material as Partial Replacement of Fine Aggregate in Concrete Production

    Directory of Open Access Journals (Sweden)

    D. Dahiru

    2014-05-01

    Full Text Available The aim of the study is to assess the quality of concrete produced with polymer waste as partial replacement of fine aggregate with a view to establishing areas where such concrete can be used. It is an experimental research that entails the following steps: First, the polymer waste material, PWM, was collected from dumps and processed; then its melting point determined. A varying proportion of PWM was used as partial replacement of fine aggregate A nominal mix of 1:3:6 was used to prepare 150×150×150 mm concrete cubes specimens with different proportion of 0, 10, 20 and 30%, respectively PWM partial substitution of fine aggregate. Samples were subjected to workability, compressive and tensile strength tests. Results show that PWM content has inverse relationship with the workability, compressive and tensile strengths. For example, an increase of 30% PWM results to about 53 and 73.3% decrease in compressive and tensile strengths, respectively. The compressive strength of the samples is in the range of 22.8-12.3 N/mm2 while the tensile strength ranges from 1.10-0.56 N/mm2. It is recommended that the concrete should not be used for structural work but such concrete has high water retention capacity. As such, the possibility of using it as a nuclear radiation shield should be investigated.

  6. Raffinate waste as a nitrogen replacement to increase the sustainable use of marine microalgae for biofuel production

    Science.gov (United States)

    Swink, C.; Palenik, B.

    2016-02-01

    High lipid content and the ability to be grown on areal non-agricultural land make microalgae one of the few viable candidates for long-term sustainable biofuel production. However, many challenges arise when attempting to scale-up production of algae biofuels at a successful industrial level. A series of growth experiments and toxicity tests were conducted to test the adaptability of 10 different strains of microalgae to grow in cultures containing two types of "raffinate" waste product as a nitrogen replacement. The results of these tests revealed that all strains of microalgae could successfully grow in cultures containing raffinate produced by means of hydrothermal liquefaction, even in bag culture, but not in cultures containing raffinate produced by a lipid trap extraction method. The application of these results is a method of reducing the costs of producing biofuel from marine and freshwater microalgae by creating a more self-sustaining recycling of nutrients from high temperature liquefaction waste.

  7. Potential applications of plant based derivatives as fat replacers, antioxidants and antimicrobials in fresh and processed meat products.

    Science.gov (United States)

    Hygreeva, Desugari; Pandey, M C; Radhakrishna, K

    2014-09-01

    Growing concern about diet and health has led to development of healthier food products. In general consumer perception towards the intake of meat and meat products is unhealthy because it may increase the risk of diseases like cardiovascular diseases, obesity and cancer, because of its high fat content (especially saturated fat) and added synthetic antioxidants and antimicrobials. Addition of plant derivatives having antioxidant components including vitamins A, C and E, minerals, polyphenols, flavanoids and terpenoids in meat products may decrease the risk of several degenerative diseases. To change consumer attitudes towards meat consumption, the meat industry is undergoing major transformations by addition of nonmeat ingredients as animal fat replacers, natural antioxidants and antimicrobials, preferably derived from plant sources. Copyright © 2014 Elsevier Ltd. All rights reserved.

  8. Repeat Minimally Invasive Mitral Valve Replacement for Recurrent Mitral Stenosis after OMC in Patients Who Decline Blood Product Transfusion for Religious Reasons.

    Science.gov (United States)

    Ito, Yujiro; Nakamura, Yoshitsugu; Tagusari, Osamu; Yoshida, Shigehiko

    2015-01-01

    Cardiac surgery for Jehovah's Witness (JW) patients is considered to be high risk because of patients' refusal to receive blood transfusion. We report a successful mitral valve replacement for recurrent mitral stenosis after OMC with minimally invasive right thoracotomy, without any transfusion of allogeneic blood or blood products. This minimally invasive mitral valve replacement through right thoracotomy was an excellent approach for JW patients.

  9. The effect of the replacement of fat with carbohydrate-based fat replacers on the dough properties and quality of the baked pogaca: a traditional high-fat bakery product

    Directory of Open Access Journals (Sweden)

    Seher SERIN

    2016-01-01

    Full Text Available Abstract Pogaca is a traditional high-fat bakery product in Turkey. This study was conducted to evaluate the effect of fat replacement in pogaca formulation by various amounts (5, 10 and 15 g on 100 g wheat flour basis of inulin, polydextrose and maltodextrin on the properties of dough and quality of pogaca. Dough stickiness values were increased by increasing the amount of fat replacer at the all fat reduction levels (20, 30 and 40% studied. Extensibility and resistance to extension values of dough were also significantly changed due to the fat replacement. Sensory analysis of pogaca showed that the formulations prepared by maltodextrin and polydextrose generally received higher scores than the formulation prepared by inulin. Overall, it was observed that up to 30% of the fat can be replaced in pogaca formulation without any decrease in the physical, textural and sensory quality of pogaca.

  10. Effects of replacing maize with mango seed kernel meal on performance, carcass characteristics and economic of production of weaner rabbits

    Directory of Open Access Journals (Sweden)

    N. Saleh

    2015-04-01

    Full Text Available An experiment was conducted to examine the effect of replacing maize with mango seed kernel meal (MSKM in the diets of Weaner rabbit on performance, carcass characteristics and economic of production. Twenty mongrel rabbits were randomly allocated to four diets in which mango seed kernel meal replaced maize at 0, 33.33, 66.67 and 100% level designed as diets 1, 2, 3 and 4 respectively. The daily feed intake (42.75-49.76, daily weight gain (8.75-9.72 and feed conversion ratio (4.64-5.19 obtained were not significantly (P<0.05 affected by the dietary levels of mango seed kernel meal. Carcass yield and weight of organs expressed as percentage of live weight did not significantly differ between the treatment means. The cost in naira per kilogram gain was highest on diet 1 (0%MSKM and lowest on diet 4 (100% MSKM having N338.84 and 245.58 respectively. The result indicates that mango seed kernel meal can replace maize at 100% level in the diet of Weaner rabbit with better performance and tremendous reduction in feed cost.

  11. Spent Mushroom Waste as a Media Replacement for Peat Moss in Kai-Lan (Brassica oleracea var. Alboglabra Production

    Directory of Open Access Journals (Sweden)

    H. Sendi

    2013-01-01

    Full Text Available Peat moss (PM is the most widely used growing substrate for the pot culture. Due to diminishing availability and increasing price of PM, researchers are looking for viable alternatives for peat as a growth media component for potted plants. A pot study was conducted with a view to investigate the possibility of using spent mushroom waste (SMW for Kai-lan (Brassica oleracea var. Alboglabra production replacing peat moss (PM in growth media. The treatments evaluated were 100% PM (control, 100% SMW, and mixtures of SMW and PM in different ratios like 1 : 1, 1 : 2, and 2 : 1 (v/v with/without NPK amendment. The experiment was arranged in a completely randomized design with five replications per treatment. Chemical properties like pH and salinity level (EC of SMW were within the acceptable range of crop production but, nutrient content, especially nitrogen content was not enough to provide sufficient nutrition to plant for normal growth. Only PM (100% and SMW and PM mixture in 1 : 1 ratio with NPK amendment performed equally in terms of Kai-lan growth. This study confirms the feasibility of replacing PM by SMW up to a maximum of 50% in the growth media and suggests that NPK supplementation from inorganic sources is to ensure a higher productivity of Kai-lan.

  12. Spent mushroom waste as a media replacement for peat moss in Kai-Lan (Brassica oleracea var. Alboglabra) production.

    Science.gov (United States)

    Sendi, H; Mohamed, M T M; Anwar, M P; Saud, H M

    2013-01-01

    Peat moss (PM) is the most widely used growing substrate for the pot culture. Due to diminishing availability and increasing price of PM, researchers are looking for viable alternatives for peat as a growth media component for potted plants. A pot study was conducted with a view to investigate the possibility of using spent mushroom waste (SMW) for Kai-lan (Brassica oleracea var. Alboglabra) production replacing peat moss (PM) in growth media. The treatments evaluated were 100% PM (control), 100% SMW, and mixtures of SMW and PM in different ratios like 1 : 1, 1 : 2, and 2 : 1 (v/v) with/without NPK amendment. The experiment was arranged in a completely randomized design with five replications per treatment. Chemical properties like pH and salinity level (EC) of SMW were within the acceptable range of crop production but, nutrient content, especially nitrogen content was not enough to provide sufficient nutrition to plant for normal growth. Only PM (100%) and SMW and PM mixture in 1 : 1 ratio with NPK amendment performed equally in terms of Kai-lan growth. This study confirms the feasibility of replacing PM by SMW up to a maximum of 50% in the growth media and suggests that NPK supplementation from inorganic sources is to ensure a higher productivity of Kai-lan.

  13. MAFFRA. Report for first years results of screening of antibacterial plant products for replacing antibiotica

    OpenAIRE

    Højberg, Ole; Canibe, Nuria; Lauridsen, Charlotte

    2017-01-01

    This is the first year internal work report by AU ANIS reporting on the experiments in 2016 with screening of selected antibacterial plant products against E coli, using a piglet stomach and ileum model.

  14. The effect of partial replacement of corn silage on rumen degradability, milk production and composition in lactating primiparous dairy cows

    Directory of Open Access Journals (Sweden)

    Hakan Biricik

    2010-01-01

    Full Text Available The objective of this experiment was to evaluate the effects of partial replacement of corn silage with long alfalfa hay and/or coarse chopped wheat straw on neutral detergent fibre (NDF rumen degradability, milk yield and composition in late lactating dairy cows fed diets with 50% forage on dry matter basis. Twelve late lactating Holstein primiparous cows including four cows equipped with a rumen cannula, averaging 210 ± 20 d in milk and weighing 575 ± 50 kg were randomly assigned in a 4x4 Latin square design. During each of four 21-d periods, cows were fed 4 total mixed diets that were varied in the forage sources: 1 50% corn silage (CS, 2 35% corn silage + 15% wheat straw (CSW, 3 35% corn silage + 15% alfalfa hay (CSA, 4 25% corn silage + 10% wheat straw + 15% alfalfa hay (CSWA. The production of milk averaged 18.55, 20.41 and 20.06 kg/d for unadjusted milk production, 4% fat corrected milk and solid corrected milk, respectively, and was not affected by treatments. Likewise, milk composition or production of milk components was not affected by diets and averaged 4.69% fat, 3.66% protein, 4.51% lactose, 866 g/d fat, 665 g/d protein, 824 g/d lactose. Treatments had no effect on in situ NDF soluble, degradable and potential degradability of all diets, whereas the effective degradability (ED of NDF was greater for cows fed CS diet than for cows fed CSW, CSA and CSWA diets (P<0.05. These values suggested that the partial replacement of corn silage with alfalfa hay and/or wheat straw has no unfavourable effect on the productive parameters.

  15. Sustainability of ancestral methods of agricultural production in Perú: ¿keep or replace?

    Directory of Open Access Journals (Sweden)

    Dani Eduardo Vargas Huanca

    2016-09-01

    Full Text Available Based on the success of some Andean products such as quinoa, potatoes or maca in international food trade and the growing environmental degradation facing developing countries, resulting from intensive exploitation activities; Our research seeks to show the trend that is assumed from the academic / scientific community and public officials in the food sector in Peru, against the need to maintain sustainable various ancestral modes of agricultural production (case quinoa, for it analyze quantitative and qualitative obtained from public institutions and Peruvian universities.

  16. Marketing of Nicotine Replacement Therapy Products in a Deregulated Swedish Pharmacy Market

    OpenAIRE

    Tozlikian, Shant; Falk, Erik

    2009-01-01

                    The thesis will provide a description of the previous Swedish NRT marketing mix, a description of the present plans of Swedish NRT marketers for the marketing mix of their products, and the present marketing mix of the previously deregulated pharmacy markets in Finland and Norway. The purpose is to develop conclusions on how marketers of NRT products could change their marketing mix in response to the deregulation of the Swedish pharmacy market.    This thesis relies on a des...

  17. Perceptions of emerging tobacco products and nicotine replacement therapy among pregnant women and women planning a pregnancy.

    Science.gov (United States)

    England, Lucinda J; Tong, Van T; Koblitz, Amber; Kish-Doto, Julia; Lynch, Molly M; Southwell, Brian G

    2016-12-01

    The increasing availability of emerging non-combusted tobacco products (snus, dissolvables, and electronic nicotine delivery systems or ENDS) may have implications for pregnant women and women of reproductive age. We conducted 15 focus groups to explore how women perceive emerging non-combusted tobacco products and nicotine replacement therapy (NRT) in general, and during pregnancy. Sessions were held in 2013 in four U.S. cities. Participants were 18-40 years old and were pregnant smokers, pregnant quitters, or smokers planning a pregnancy. Responses were coded and analyzed to identify key themes using NVivo 10.0 qualitative software (QSR). Several themes emerged from focus groups. Participants generally found snus unappealing, but viewed dissolvables as a discreet and stigma-free way to use tobacco during pregnancy. Participants perceived NRT as ineffective and having undesired side effects. ENDS were thought to offer advantages over cigarettes, including use in smoke-free areas, lower cost, appealing flavors, and fewer health effects, and were seen by some as a potential quit aid. Some participants, however, worried that the lack of natural stopping point could lead to excessive use. Many participants felt that the use of any tobacco or NRT product is harmful during pregnancy. Women seeking to reduce health risks or stigma related to smoking during pregnancy may perceive advantages of using some emerging products over cigarettes. These findings can inform future public health efforts to reduce risks associated with tobacco product use among women of reproductive age.

  18. Nasal tooth: case report

    Energy Technology Data Exchange (ETDEWEB)

    Park, Si Hyun; Kim, Ji Hye; Hwang, Hee Young; Yang, Dal Mo; Kim, Hyung Sik; Park, Chol Heui [Gachon Medical School, Inchon (Korea, Republic of)

    2002-12-01

    Ectopic tooth is not uncommon and usually occurs in the palate and maxillary sinus. We report a case of ectopic tooth located in the nasal cavity, a rare site. The mass depicted by CT was highly attenuated, and central lucency was observed.

  19. To Tell the Tooth

    Science.gov (United States)

    ... To Tell the Tooth Print and Take a Quiz + Watch Videos Dudley and Friends Sesame Street + For Preteens Healthy Habits Nutrition Be a Dentist + For Educators Career Resources Presentations and Resources Smile Smarts Dental Health Curriculum MouthHealthy Kids > Games and Quizzes > To Tell the Tooth To Tell ...

  20. Effect of amalgam corrosion products in non-discolored dentin on the bond strength of replaced composite resin

    Directory of Open Access Journals (Sweden)

    Marjaneh Ghavamnasiri

    2015-01-01

    Full Text Available Objectives: To evaluate the effect of amalgam corrosion products in non-discolored dentin on the bond strength of replaced composite resin. Materials and Methods: One hundred and sixty-one Class I cavities were prepared on extracted premolars and divided into seven groups. Group 1: Light-cured composite; Groups 2, 3, and 4: Amalgam stored in 37°C normal saline for respectively 1, 3, and 6 months and then replaced with composite leaving the cavity walls intact. Groups 5, 6, and 7: Identical to Groups 2, 3, and 4, except the cavity walls were extended 0.5 mm after amalgam removal. Eighteen specimens from each group were selected for shear bond strength testing, while on remaining five samples, elemental microanalysis was conducted. Data were analyzed using Mann-Whitney and Freidman (α = 0.05. Results: There was a significant difference between Groups 1 and 4 and also between Group 1 and Groups 5, 6, and 7. However, Groups 1, 2, and 3 showed no significant difference regarding bond strength. Bond strengths of Group 4 was significantly less than Groups 2 and 3. However, Groups 5, 6, and 7 showed similar bond strength. There was no difference among all groups in terms of metal elements at any storage times.

  1. Use of acid whey and mustard seed to replace nitrites during cooked sausage production.

    Science.gov (United States)

    Wójciak, Karolina M; Karwowska, Małgorzata; Dolatowski, Zbigniew J

    2014-02-01

    The aim was to determine the effects of sea salt, acid whey, native and autoclaved mustard seed on the physico-chemical properties, especially colour formation, microbial stability and sensory evaluation of non-nitrite cooked sausage during chilling storage. The cooked pork sausages were divided into 4 groups (group I--control sausages with curing salt (2.8%) and water (5%) added; group II--sausages with sea salt (2.8%) and acid whey (5%) added; group III--sausages with sea salt (2.8%), acid whey (5%) and mustard seed (1%) added; group IV--sausages with sea salt (2.8%), acid whey (5%) and autoclaved mustard seed (1%) added). Instrumental colour (L*, a*, b*), oxygenation index (ΔR), 650/570 nm ratio, heme iron, pH value and water activity (aw) were determined 1 day after production and after 10, 20 and 30 days of refrigerated storage (4 °C). Sensory analysis was conducted immediately after production (day 1). Microbial analysis (lactic acid bacteria, total viable count, Clostridium spp.) was determinated at the end of storage (30 days). The autoclaved mustard with acid whey can be used at 1.0% (w/w) of model cooked sausages with beneficial effect on physico-chemical and sensory qualities of no-nitrite sausage. This product can be stored at refrigeration temperature for up to 30 days, in vacuum, with good acceptability. The colour, visual appearance and overall quality of samples with autoclaved mustard seed and acid whey were similar to the control with curing agent.

  2. Exceptionally prolonged tooth formation in elasmosaurid plesiosaurians

    Science.gov (United States)

    Kear, Benjamin P.; Larsson, Dennis; Lindgren, Johan; Kundrát, Martin

    2017-01-01

    Elasmosaurid plesiosaurians were globally prolific marine reptiles that dominated the Mesozoic seas for over 70 million years. Their iconic body-plan incorporated an exceedingly long neck and small skull equipped with prominent intermeshing ‘fangs’. How this bizarre dental apparatus was employed in feeding is uncertain, but fossilized gut contents indicate a diverse diet of small pelagic vertebrates, cephalopods and epifaunal benthos. Here we report the first plesiosaurian tooth formation rates as a mechanism for servicing the functional dentition. Multiple dentine thin sections were taken through isolated elasmosaurid teeth from the Upper Cretaceous of Sweden. These specimens revealed an average of 950 daily incremental lines of von Ebner, and infer a remarkably protracted tooth formation cycle of about 2–3 years–other polyphyodont amniotes normally take ~1–2 years to form their teeth. Such delayed odontogenesis might reflect differences in crown length and function within an originally uneven tooth array. Indeed, slower replacement periodicity has been found to distinguish larger caniniform teeth in macrophagous pliosaurid plesiosaurians. However, the archetypal sauropterygian dental replacement system likely also imposed constraints via segregation of the developing tooth germs within discrete bony crypts; these partly resorbed to allow maturation of the replacement teeth within the primary alveoli after displacement of the functional crowns. Prolonged dental formation has otherwise been linked to tooth robustness and adaption for vigorous food processing. Conversely, elasmosaurids possessed narrow crowns with an elongate profile that denotes structural fragility. Their apparent predilection for easily subdued prey could thus have minimized this potential for damage, and was perhaps coupled with selective feeding strategies that ecologically optimized elasmosaurids towards more delicate middle trophic level aquatic predation. PMID:28241059

  3. ECO-EFFICIENCY ANALYSIS OF LOW-CARBON CEMENT PRODUCTION BY REPLACING CLINKER

    Directory of Open Access Journals (Sweden)

    Yanay Ruíz Rosa

    2017-04-01

    Full Text Available This work carries out the environmental evaluation of the cement production in Siguaney Factory as well as the calculation of the Eco-efficiency indicators according to the ISO 14045 norms; the Recipe methodology was used including 18 impact categories and the SimaPro 8.1 software was also used. In order to evaluate the eco-efficiency indicators according to the ISO 14045 norm, the results of the impact categories are related to the monetary value indicators, allowing the evaluation of the current situation as well as the consequences of the suggested modifications. As a result, the environmental profiles of P-35 cement (base case were obtained as well as those of the low carbon ones (LC3-35 y LC3-50 resulting from the clinker substitution by kaolinitic clay after some studies carried out by CIDEM researchers; and the eco-efficiency profiles. The comparison made between P-35 cement and the low-carbon cements showed positive results in eight weather impact categories, however, toxicity-related ones rise due to the increase in electricity consumption connected to the grinding of materials to obtain burnt clay bringing about a greater amount of emissions of volatile organic compounds to the air. An improvement in the eco-efficiency of 6 out of 8 calculated indicators is observed due to a simultaneous decrease in the production costs and the environmental impacts. LC3-50 cement shows the best results. The methodology used permits to evaluate alternatives related to the material substitution in the construction sector.

  4. Tooth Tissue Engineering: The Importance of Blood Products as a Supplement in Tissue Culture Medium for Human Pulp Dental Stem Cells.

    Science.gov (United States)

    Pisciolaro, Ricardo Luiz; Duailibi, Monica Talarico; Novo, Neil Ferreira; Juliano, Yara; Pallos, Debora; Yelick, Pamela Crotty; Vacanti, Joseph Phillip; Ferreira, Lydia Masako; Duailibi, Silvio Eduardo

    2015-11-01

    One of the goals in using cells for tissue engineering (TE) and cell therapy consists of optimizing the medium for cell culture. The present study compares three different blood product supplements for improved cell proliferation and protection against DNA damage in cultured human dental pulp stem cells for tooth TE applications. Human cells from dental pulp were first characterized as adult stem cells (ectomesenchymal mixed origin) by flow cytometry. Next, four different cell culture conditions were tested: I, supplement-free; II, supplemented with fetal bovine serum; III, allogeneic human serum; and IV, autologous human serum. Cultured cells were then characterized for cell proliferation, mineralized nodule formation, and colony-forming units (CFU) capability. After 28 days in culture, the comet assay was performed to assess possible damage in cellular DNA. Our results revealed that Protocol IV achieved higher cell proliferation than Protocol I (p = 0.0112). Protocols II and III resulted in higher cell proliferation than Protocol I, but no statistical differences were found relative to Protocol IV. The comet assay revealed less cell damage in cells cultured using Protocol IV as compared to Protocols II and III. The damage percentage observed on Protocol II was significantly higher than all other protocols. CFUs capability was highest using Protocol IV (p = 0.0018) and III, respectively, and the highest degree of mineralization was observed using Protocol IV as compared to Protocols II and III. Protocol IV resulted in significantly improved cell proliferation, and no cell damage was observed. These results demonstrate that human blood product supplements can be used as feasible supplements for culturing adult human dental stem cells.

  5. Tooth reorientation affects tooth function during prey processing and tooth ontogeny in the lesser electric ray, Narcine brasiliensis.

    Science.gov (United States)

    Dean, Mason N; Ramsay, Jason B; Schaefer, Justin T

    2008-01-01

    The dental anatomy of elasmobranch fishes (sharks, rays and relatives) creates a functional system that is more dynamic than that of mammalian dentition. Continuous dental replacement (where new teeth are moved rostrally to replace older ones) and indirect fibrous attachment of the dentition to the jaw allow teeth to reorient relative to the jaw over both long- and short-term scales, respectively. In this study, we examine the processing behavior and dental anatomy of the lesser electric ray Narcine brasiliensis (Olfers, 1831) to illustrate that the freedom of movement of elasmobranch dentition allows a functional flexibility that can be important for complex prey processing behaviors. From static manipulations of dissected jaws and observations of feeding events in live animals, we show that the teeth rotate during jaw protrusion, resulting in a secondary grasping mechanism that likely serves to hold prey while the buccal cavity is flushed free of sediment. The function of teeth is not always readily apparent from morphology; in addition to short-term reorientation, the long-term dental reorientation during replacement allows a given tooth to serve multiple functions during tooth ontogeny. Unlike teeth inside the mouth, the cusps of external teeth (on the portion of the tooth pad that extends past the occlusal plane) lay flat, such that the labial faces act as a functional battering surface, protecting the jaws during prey excavation.

  6. Effect of sugar beet tubers as a partial replacer to green fodder on production performance and economics of lactating Surti buffaloes in lean period

    Directory of Open Access Journals (Sweden)

    L. M. Sorathiya

    2015-01-01

    Full Text Available Aim: The objective of this study was to evaluate the effects of sugar beet tubers as a replacer to green fodder on production performance and economics of lactating Surti buffaloes. Materials and Methods: This trial was conducted at the Livestock Research Station, Navsari Agricultural University, Navsari. Twenty lactating Surti buffaloes in a changeover experimental design were selected to assess the effects of replacing green fodder with sugar beet (Beta vulgaris L. tubers on production performance, economics of feeding sugar beet and blood biochemical profile. Half (50% of the hybrid Napier was replaced with sliced sugar beet tubers in the ration of experimental animals. Results: Partial replacement of hybrid Napier with that of sugar beet tubers numerically improved dry matter intake, milk yield, 4% fat corrected milk and milk composition parameters such as fat, solid non-fat, protein and lactose, but not significantly. The blood parameters were in normal range and non-significant except that of glucose and triglycerides, which were increased in the sugar beet group. Replacing sugar beet tubers also proved to be cost-effective with improved net profit around Rs. 6.63/day. Conclusion: It can be concluded that 50% hybrid Napier fodder can be replaced with sugar beet tubers without any adverse effect on animal production performance, milk composition blood biochemical profile and economics of feeding.

  7. Gingival Papillae Contour after Implant-supported Single-Tooth Replacements%单枚后牙种植修复体龈乳头形态及其变化的临床分析

    Institute of Scientific and Technical Information of China (English)

    王国世; 李韶伟; 蔡露

    2011-01-01

    Objective: To observe the gingival papillae contour and its variation after posterior single-tooth implantsupported restoration. Methods: 20 single-tooth implant-supported restorations which were followed-up for more than 3 months were retrospectively evaluated. Data related with the height of gingival papillae, the papilla index score (PIS),and questionnaire of the patient's satisfaction were obtained. Analysis of data were performed with SAS 9.13 software. P< 0.01 was considered high significant. Results: 19 implants showed osseointegration. In the 35 observed gingival papillae, the mesial and distal papillae index score was at levels 3 in 11, at levels 2 in 19, at levels 1 in 5.Questionnaire of the patient' s satisfaction degree was 89.47%. The heights of gingival papillae measured immediately after restoration, at the end of 1-month and 3-month respectively revealed significant differences (P<0.01). Conclusion: The heights of gingival papillae supported by a single implant restoration grows to the top at the end of three months when final crown prosthesos were done.%目的:通过分析单枚后牙种植修复体龈乳头形态及变化,探讨其与种植修复体牙龈美学有关的相关因素.方法:选择20枚后牙种植修复体,通过修复后不同时期的临床检查、根尖片、研究模型、患者满意度调查等方法.得到种植修复体龈乳头高度、牙龈乳头指数(papilla index score,PIS)和患者满意度数据,并进行统计分析.结果:随访到的19枚种植体均形成良好的骨结合,所观察的35个龈乳头中,根据Jemt的PIS分级,11个龈乳头为Ⅲ级,19个龈乳头为Ⅱ级,5个龈乳头为I级.龈乳头高度在修复完成后即刻、修复后1个月、修复后3个月的3次测量中逐次增大.使用SAS 9.13软件进行统计分析,其差异有高度统计学意义(P<0.01).在患者满意度问卷调查中.满意率达89.47%.结论:单枚后牙种植修复体的龈乳头高度在冠修复完成后的3

  8. Milk production is unaffected by replacing barley or sodium hydroxide wheat with maize cob silage in rations for dairy cows.

    Science.gov (United States)

    Hymøller, L; Hellwing, A L F; Lund, P; Weisbjerg, M R

    2014-05-01

    Starch is an important energy-providing nutrient for dairy cows that is most commonly provided from cereal grains. However, ruminal fermentation of large amounts of easily degradable starch leads to excessive production and accumulation of volatile fatty acids (VFA). VFA not only play a vital role in the energy metabolism of dairy cows but are also the main cause of ruminal acidosis and depressed feed intake. The aim of the present study was to compare maize cob silage (MCS) as an energy supplement in rations for dairy cows with highly rumen-digestible rolled barley and with sodium hydroxide wheat (SHW), which has a higher proportion of by-pass starch than barley. Two studies were carried out: (1) a production study on 45 Danish Holstein cows and (2) an intensive study to determine digestibilities, rumen fermentation patterns and methane emission using three rumen-cannulated Danish Holstein cows. Both studies were organised as a 3×3 Latin square with three experimental periods and three different mixed rations. The rations consisted of grass-clover silage and maize silage (~60% of dry matter (DM)), rapeseed cake, soybean meal, sugar beet pulp and one of three different cereals as a major energy supplement: MCS, SHW or rolled barley (~25% of DM). When MCS replaced barley or SHW as an energy supplement in the mixed rations, it resulted in a lower dry matter intake; however, the apparent total tract digestibilities of DM, organic matter, NDF, starch and protein were not different between treatments. The energy-corrected milk yield was unaffected by treatment. The fat content of the milk on the MCS ration was not different from the SHW ration, whereas it was higher on the barley ration. The protein content of the milk decreased when MCS was used in the ration compared with barley and SHW. From ruminal VFA patterns and pH measures, it appeared that MCS possessed roughage qualities with respect to rumen environment, while at the same time being sufficiently energy rich

  9. Ankle replacement

    Science.gov (United States)

    Ankle arthroplasty - total; Total ankle arthroplasty; Endoprosthetic ankle replacement; Ankle surgery ... You may not be able to have a total ankle replacement if you have had ankle joint infections in ...

  10. Knee Replacement

    Science.gov (United States)

    Knee replacement is surgery for people with severe knee damage. Knee replacement can relieve pain and allow you to ... Your doctor may recommend it if you have knee pain and medicine and other treatments are not ...

  11. Utilization of tuna roe and using inulin as oil replacer for producing value added omega-3 mayonnaise product

    Directory of Open Access Journals (Sweden)

    Kanrawee Hunsakul

    2016-03-01

    Full Text Available Background: The fishery industry has been important for Thailand’s economy for more than 30 years. For example, Thailand isthe world’s largest canned tuna producer and exporter. However, onlyordinary meat or white meatis usedfor raw materialin canned tuna products. Whileroe, viscera, head and dark meataresold at cheap prices,with theseby-products being usedto feed plant or local human food,its nutritive values withfat,protein and minerals arestill high. It is well known that tuna is a good source of polyunsaturated fatty acid (PUFA, including Eicosapentaenoicacid (EPA and Docosahexanoic acid (DHA.People around the world pay more attention to eatingsaladsconsisting of fruits and vegetables, in addition todressing. Generally, mayonnaise, a kind of salad dressing, consists of chicken egg yolk(12-15% and soybean oil (30-65%. Both of these ingredients contain very high saturated fatty acid contents. Therefore, because normal mayonnaise is high in fat content and low in polyunsaturated fatty acid, this product is not ideal for people on a diet or those who are trying to control their weight. Objective: To increase omega-3 through tuna roe substitution and to replace fat content using inulin gel. Methods: Tuna roe was prepared by soaking in galangalsolutionextracted with 95% ethanol for removal fishy/rancidity odor. Inulin powder 45 g was suspended in 55 ml of water before being brought to heat at temperature 80oC for 30min to form a gel and stored at 4oC. Treatment ofmakingomega-3 mayonnaise product was started using 100% tuna roe substitution for egg yolk. Thereafter, inulin gel was added to replace vegetable oil at 0, 25, 50, 75 and 100%. Basic mayonnaise containing egg yolk and 0% inulin gel (100% soy bean oil was used asthecontrol sample. Color and emulsion stability testswere monitored for physical quality. pH value, peroxide value (PV and thiobarbituric acid reactive substances (TBARS were used for chemical qualityanalyses. Total viable

  12. Overview of Tooth Disorders

    Science.gov (United States)

    ... Abbreviations Weights & Measures ENGLISH View Professional English Deutsch Japanese Espaniol Find information on medical topics, symptoms, drugs, ... Abnormal tooth enamel may be due to a diet containing insufficient vitamin D, as in rickets . Abnormal ...

  13. Tooth in oropharynx

    Directory of Open Access Journals (Sweden)

    D Nagarajappa

    2011-01-01

    Full Text Available The incidence of ectopic teeth has increased. In many cases, the etiology of ectopic teeth cannot be identified. Ectopic tooth in deciduous dentition period is very rare and information is limited about its causes and characteristics. The conditions commonly associated with an increased prevalence of ectopic teeth include cleft lip and palate, cleidocranial dysplasia, and Gardner syndrome. The diagnosis is made by the clinical and radiological examinations. The indication for extraction in ectopic teeth cases is in general determined by the presence of symptomatology, or by the need for preventing future complications. We present a case of an ectopic maxillary tooth in a 4 year-old boy. In addition, this report also addresses a young patient with a tooth in the oropharynx with the objective of non traumatic etiology, and such a clinical presentation is extremely rare. The authors believe the case presented here is the first documented case of an ectopic supernumerary tooth seen in the oropharynx.

  14. Tooth in oropharynx.

    Science.gov (United States)

    Nagarajappa, D; Manjunatha, Bs

    2011-09-01

    The incidence of ectopic teeth has increased. In many cases, the etiology of ectopic teeth cannot be identified. Ectopic tooth in deciduous dentition period is very rare and information is limited about its causes and characteristics. The conditions commonly associated with an increased prevalence of ectopic teeth include cleft lip and palate, cleidocranial dysplasia, and Gardner syndrome. The diagnosis is made by the clinical and radiological examinations. The indication for extraction in ectopic teeth cases is in general determined by the presence of symptomatology, or by the need for preventing future complications. We present a case of an ectopic maxillary tooth in a 4 year-old boy. In addition, this report also addresses a young patient with a tooth in the oropharynx with the objective of non traumatic etiology, and such a clinical presentation is extremely rare. The authors believe the case presented here is the first documented case of an ectopic supernumerary tooth seen in the oropharynx.

  15. Developing a biomimetic tooth bud model.

    Science.gov (United States)

    Smith, Elizabeth E; Zhang, Weibo; Schiele, Nathan R; Khademhosseini, Ali; Kuo, Catherine K; Yelick, Pamela C

    2017-01-08

    A long-term goal is to bioengineer, fully functional, living teeth for regenerative medicine and dentistry applications. Biologically based replacement teeth would avoid insufficiencies of the currently used dental implants. Using natural tooth development as a guide, a model was fabricated using post-natal porcine dental epithelial (pDE), porcine dental mesenchymal (pDM) progenitor cells, and human umbilical vein endothelial cells (HUVEC) encapsulated within gelatin methacrylate (GelMA) hydrogels. Previous publications have shown that post-natal DE and DM cells seeded onto synthetic scaffolds exhibited mineralized tooth crowns composed of dentin and enamel. However, these tooth structures were small and formed within the pores of the scaffolds. The present study shows that dental cell-encapsulated GelMA constructs can support mineralized dental tissue formation of predictable size and shape. Individually encapsulated pDE or pDM cell GelMA constructs were analysed to identify formulas that supported pDE and pDM cell attachment, spreading, metabolic activity, and neo-vasculature formation with co-seeded endothelial cells (HUVECs). GelMa constructs consisting of pDE-HUVECS in 3% GelMA and pDM-HUVECs within 5% GelMA supported dental cell differentiation and vascular mineralized dental tissue formation in vivo. These studies are the first to demonstrate the use of GelMA hydrogels to support the formation of post-natal dental progenitor cell-derived mineralized and functionally vascularized tissues of specified size and shape. These results introduce a novel three-dimensional biomimetic tooth bud model for eventual bioengineered tooth replacement teeth in humans. Copyright © 2017 John Wiley & Sons, Ltd.

  16. Murciano-Granadina Goat Performance and Methane Emission after Replacing Barley Grain with Fibrous By-Products.

    Directory of Open Access Journals (Sweden)

    Carla Ibáñez

    Full Text Available The aim of this experiment was to study the effects of substituting dietary barley grain with orange pulp or soybean hulls on energy, nitrogen and carbon balance, methane emission and milk performance in dairy goats. Twelve Murciano-Granadina dairy goats in midlactation were selected and divided into three groups based on similar body weight (42.1 ± 1.2 kg and milk yield (2.16 ± 0.060 kg/goat/day. The experiment was conducted in an incomplete crossover design where one group of four goats was fed a mixed ration of barley grain (BRL, another group of four goats replaced barley grain with orange pulp (OP and the last group of four goats with soybean hulls (SH. After adaptation to diets, the goats were allocated to individual metabolism cages and intake, faeces, urine and milk were recorded and analysed. Then, gas exchange measurements were recorded by a mobile open-circuit indirect calorimetry system using a head box. Dry matter intake was similar for all three groups (2.03 kg/d, on average. No influence of the diet was observed for energy balance and the efficiency of use of metabolizable energy for milk production was 0.61. The OP and SH diets showed greater (P < 0.05 fat mobilization (-42.8 kJ/kg of BW0.75, on average than BRL (19.2 kJ/kg of BW0.75. Pentadecanoic acid (15:0 and heptadecanoic acid (17:0 were potential biomarkers of rumen function because the higher contents found in the milk of OP and SH goats than BRL suggest a negative impact of these diets on rumen bacterial metabolism; probably linked to the lower nitrogen supply of diet OP to synthesize microbial protein and greater content of fat in diet SH. Replacement of cereal grain with fibrous by-products did not increased enteric methane emissions (54.7 L/goat per day, on average. Therefore, lactating goats could utilize dry orange pulp and soybean hulls diets with no detrimental effect on milk performance.

  17. Evaluation of Honey and Rice Syrup as Replacements for Sorbitol in the Production of Restructured Duck Jerky.

    Science.gov (United States)

    Triyannanto, Endy; Lee, Keun Taik

    2016-02-01

    The aim of this study was to evaluate the potential of natural humectants such as honey and rice syrup to replace sorbitol in the production of restructured duck jerky. Each humectant was mixed at 3%, 6%, and 10% (wt/wt) concentrations with the marinating solution. The values of water activity and the moisture-to-protein ratio of all of the samples were maintained below 0.75. Jerky samples treated with honey retained more moisture than those exposed to other treatments. Among all samples, those treated with 10% sorbitol produced the highest processing yield and the lowest shear force values. The highest L* value and the lowest b* value were observed for the sorbitol-treated sample, followed by the rice syrup- and honey-treated samples. Duck jerky samples treated with 10% honey showed the highest scores for the sensory parameters evaluated. The overall acceptability scores of samples treated with rice syrup were comparable with those of samples treated with sorbitol. Microscopic observation of restructured duck jerky samples treated with honey showed stable forms and smaller pores when compared with other treatments.

  18. Autogenous wisdom tooth transplantation: A case series with 6-9 months follow-up

    Directory of Open Access Journals (Sweden)

    Tatjana Nimcenko

    2014-01-01

    Full Text Available Tooth transplantation can be considered a valid and predictable treatment option for rehabilitating young patients with permanent teeth loss. This study presents several cases of successful autogenous tooth transplantation with a 6-9 months follow-up. Tooth auto-transplantation can be considered a reasonable option for replacing missing teeth when a donor tooth is available. The auto-transplantation of a right mandibular third molar with compromised function and esthetics to replace the residual roots resulting from coronal destruction due to extensive carious lesion of the second molar in the same quadrant as shown in the presented cases can result a viable treatment alternative especially in a young patient that cannot undergo dental implant therapy. Transplantation of mature third molar seems to be a promising method for replacing a lost permanent molar tooth and restoring esthetics and function. This clinical procedure showed excellent functional and esthetical long-term results in the analyzed cases.

  19. Autogenous wisdom tooth transplantation: A case series with 6-9 months follow-up

    Science.gov (United States)

    Nimčenko, Tatjana; Omerca, Gražvydas; Bramanti, Ennio; Cervino, Gabriele; Laino, Luigi; Cicciù, Marco

    2014-01-01

    Tooth transplantation can be considered a valid and predictable treatment option for rehabilitating young patients with permanent teeth loss. This study presents several cases of successful autogenous tooth transplantation with a 6-9 months follow-up. Tooth auto-transplantation can be considered a reasonable option for replacing missing teeth when a donor tooth is available. The auto-transplantation of a right mandibular third molar with compromised function and esthetics to replace the residual roots resulting from coronal destruction due to extensive carious lesion of the second molar in the same quadrant as shown in the presented cases can result a viable treatment alternative especially in a young patient that cannot undergo dental implant therapy. Transplantation of mature third molar seems to be a promising method for replacing a lost permanent molar tooth and restoring esthetics and function. This clinical procedure showed excellent functional and esthetical long-term results in the analyzed cases. PMID:25540668

  20. Morphological and Functional Parameters in Patients with Tooth Wear before and after Treatment

    OpenAIRE

    Sierpinska, Teresa; Kuc, Joanna; Golebiewska, Maria

    2013-01-01

    Advanced tooth wear often results in lost vertical dimension and impacts facial aesthetics. Complex restorative treatment can replace the lost tooth structure and improve functional occlusal and facial skeleton parameters. Purpose: The aim of the study is to assess changes in the morphological and functional occlusal parameters of the facial skeleton after prosthetic rehabilitation that increased lost occlusal vertical dimension. Material and Methodology: 50 patients with advanced tooth wear ...

  1. Características y utilidad de los sustitutos de la comida: análisis de los productos comercializados de uso habitual en nuestro entorno Usefulness of meal replacement: analysis of the principal meal replacement products commercialised in Spain

    Directory of Open Access Journals (Sweden)

    M. Cabanillas

    2009-10-01

    embargo para otros micronutrientes como el calcio, el magnesio, el ácido fólico y la vitamina B12 y no llega a alcanzarse el 33% de las RDA. Conclusión: Los planes de sustitución parcial de comidas son una opción más a tener en cuenta en el tratamiento de la obesidad, especialmente por tratarse de dietas de más fácil comprensión y manejo y con más altas tasas de seguimiento a largo plazo. Creemos, por tanto, que es fundamental ampliar el conocimiento que se tiene de estos productos, así como el establecimiento de unos criterios más estrictos en lo referente a la composición de los mismos, por parte de la administración.Introduction: Obesity has become a serious health problem. It is nowadays considered a pandemia and it is therefore a priority to develop different strategies on its prevention and treatment: lifestyle changes, community interventions as well as pharmacological and non-pharmacological activities. In this way, meal replacement products (energy reduced products designed to replace one or two regular meals providing a supously nutritionally balanced low fat meal can be an alternative to traditional reduced calorie diet. Objective: Our aim was to revise the literature on meal replacement and compare the nutritional composition and the different forms of presentation of the main meal replacement products commercialised in Spain. Methodology: We made a research in pharmacies, weight loss centers and big supermarkets of food products specially designed to replace a meal. We compared the nutritional composition regarding macronutrients and micronutrients of the thirty-two different products founded, including their different form of presentation (bars, powder, drink-shakes and crackers. In order to judge their nutritional composition, we compared one meal replaced with these products with the Recommended Dietary Allowances (RDA. Results: The most common form of meal replacement products were bars (23 of 32 analyzed products, followed by powder for

  2. Effect of replacing alfalfa with panicled-tick clover or sericea lespedeza in corn-alfalfa-based substrates on in vitro ruminal methane production.

    Science.gov (United States)

    Naumann, H D; Lambert, B D; Armstrong, S A; Fonseca, M A; Tedeschi, L O; Muir, J P; Ellersieck, M R

    2015-06-01

    Methane emissions from ruminant livestock contribute to total anthropogenic greenhouse gas emissions and reduce metabolizable energy intake by the animal. Condensed tannins (CT) are polyphenolic plant secondary compounds commonly produced by some perennial forage legumes that characteristically bind to protein, carbohydrates, and minerals. The degree to which CT may affect ruminant nutrition depends upon the concentration, structural composition, and biological activity of the CT. The objective of our experiment was to determine the effect of replacing alfalfa in a corn-alfalfa-based substrate with a legume containing CT on in vitro CH4 production and the dynamics of fermentation using an in vitro gas production technique. All fermented substrates contained 50% ground corn as the energy concentrate portion, whereas the forage portion (50%) of each diet was comprised of alfalfa (control) or some combination of alfalfa and sericea lespedeza (SL) or panicled-tick clover (PTC). Our treatments consisted of PTC or SL 15, 30, and 45, which corresponded with 15, 30, or 45% replacement of the diet (alfalfa component) with either PTC or SL. Substrates containing 45% PTC or SL reduced in vitro CH4 production. Treatments did not affect total gas production as compared with that of the control. Replacement of alfalfa with SL or PTC increased fermentable organic matter (FOM). The PTC treatment increased FOM by as much as 1.8% at the 45% replacement level, whereas FOM of SL 45 was increased by less than 1%. The replacement of alfalfa with PTC increased substrate nutritive value greater than replacement with SL. There were no correlations between any physicochemical constituent of the substrates and CH4 production. A combination of factors associated with the inclusion of PTC and SL contributed to the in vitro CH4 production, and CT in these forages was likely a major contributing factor. Further confirmation of these results on in situ or in vivo animal systems is required. If

  3. Intensified Protein Structuring for more sustainable foods: Development of the up-scaled Couette Cell for the production of meat replacers

    NARCIS (Netherlands)

    Krintiras, G.

    2016-01-01

    To meet the increasing need for protein-rich food of an ever growing population, plant-based proteins are being utilized in meat products as replacements for animal-based proteins. Legumes such as soy can serve as an alternative protein source, by featuring both high protein content (36%) and protei

  4. Intensified Protein Structuring for more sustainable foods: Development of the up-scaled Couette Cell for the production of meat replacers

    NARCIS (Netherlands)

    Krintiras, G.

    2016-01-01

    To meet the increasing need for protein-rich food of an ever growing population, plant-based proteins are being utilized in meat products as replacements for animal-based proteins. Legumes such as soy can serve as an alternative protein source, by featuring both high protein content (36%) and protei

  5. Replacement of missing teeth in a southern region of Vietnam--a descriptive dental laboratory study.

    NARCIS (Netherlands)

    Chau, T.N.; Witter, D.J.; Kreulen, C.M.; Creugers, N.H.J.; Tu, H.H.

    2009-01-01

    AIM: To explore whether tooth replacement in a southern region of Vietnam is in line with the primary health care approach, aiming at health services for all people at affordable costs. METHODS: Tooth replacement was investigated by means of prostheses as delivered by four dental laboratories of whi

  6. Biomaterial selection for tooth regeneration.

    Science.gov (United States)

    Yuan, Zhenglin; Nie, Hemin; Wang, Shuang; Lee, Chang Hun; Li, Ang; Fu, Susan Y; Zhou, Hong; Chen, Lili; Mao, Jeremy J

    2011-10-01

    Biomaterials are native or synthetic polymers that act as carriers for drug delivery or scaffolds for tissue regeneration. When implanted in vivo, biomaterials should be nontoxic and exert intended functions. For tooth regeneration, biomaterials have primarily served as a scaffold for (1) transplanted stem cells and/or (2) recruitment of endogenous stem cells. This article critically synthesizes our knowledge of biomaterial use in tooth regeneration, including the selection of native and/or synthetic polymers, three-dimensional scaffold fabrication, stem cell transplantation, and stem cell homing. A tooth is a complex biological organ. Tooth loss represents the most common organ failure. Tooth regeneration encompasses not only regrowth of an entire tooth as an organ, but also biological restoration of individual components of the tooth including enamel, dentin, cementum, or dental pulp. Regeneration of tooth root represents perhaps more near-term opportunities than the regeneration of the whole tooth. In the adult, a tooth owes its biological vitality, arguably more, to the root than the crown. Biomaterials are indispensible for the regeneration of tooth root, tooth crown, dental pulp, or an entire tooth.

  7. Varanoid Tooth Eruption and Implantation Modes in a Late Cretaceous Mosasaur

    Directory of Open Access Journals (Sweden)

    Min eLiu

    2016-05-01

    Full Text Available Erupting teeth are some of the oldest witnesses of developmental processes in the vertebrate fossil record and provide an important resource for vertebrate cladistics. Here we have examined a mosasaur jaw fragment from central Texas using ultrathin ground section histology and 3D tomographic imaging to assess features critical for the cladistic placement of mosasaurs among varanoids versus snakes: (i the orientation of replacement teeth compared to the major tooth axis, (ii the occurrence of resorption pits, and (iii the mode of tooth implantation/attachment to the tooth bearing element. The replacement tooth studied here developed in an inclined position slightly distal of the deciduous parent tooth, similar to another varanoid squamate, the Gila monster Heloderma suspectum. Ground sections and tomographs also demonstrated that the replacement tooth attachment apparatus was entirely intact and that there was no evidence of mechanical deformation. Sections and tomographs further illustrated that the replacement tooth was located within a bony crypt and the inclination of the crypt matched the inclination of the replacement tooth. These preparations also revealed the presence of a resorption pit within the boundaries of the deciduous tooth that surrounded the developing replacement tooth. This finding suggests that developing mosasaur teeth developed within the walls of resorption pits similar to varanoid tooth germs and unlike developing snake teeth which are surrounded by fibrous connective tissue integuments. Finally, mosasaurs featured pseudo-thecodont tooth implantation with teeth anchored within a socket of mineralized tissue by means of a mineralized periodontal ligament. Together, these data indicate that the moderate inclination of the erupting mosasaur tooth studied here is neither a result of postmortem displacement nor a character representative of snakes, but rather a shared character between Mosasaurs and other varanoids such as

  8. Tooth regeneration: Current status

    Directory of Open Access Journals (Sweden)

    Dadu Shifali

    2009-01-01

    Full Text Available Regeneration of a functional tooth has the potential to be a promising therapeutic strategy. Experiments have shown that with the use of principles of bioengineering along with adult stem cells, scaffold material, and signaling molecules, tooth regeneration is possible. Research work is in progress on creating a viable bioroot with all its support. A new culture needs to be created that can possibly provide all the nutrients to the stem cells. With the ongoing research, tissue engineering is likely to revolutionize dental health and well-being of people by regenerating teeth over the next decade.

  9. Tooth regeneration: current status.

    Science.gov (United States)

    Dadu, Shifali S

    2009-01-01

    Regeneration of a functional tooth has the potential to be a promising therapeutic strategy. Experiments have shown that with the use of principles of bioengineering along with adult stem cells, scaffold material, and signaling molecules, tooth regeneration is possible. Research work is in progress on creating a viable bioroot with all its support. A new culture needs to be created that can possibly provide all the nutrients to the stem cells. With the ongoing research, tissue engineering is likely to revolutionize dental health and well-being of people by regenerating teeth over the next decade.

  10. Directed Replacement

    CERN Document Server

    Karttunen, L

    1996-01-01

    This paper introduces to the finite-state calculus a family of directed replace operators. In contrast to the simple replace expression, UPPER -> LOWER, defined in Karttunen (ACL-95), the new directed version, UPPER @-> LOWER, yields an unambiguous transducer if the lower language consists of a single string. It transduces the input string from left to right, making only the longest possible replacement at each point. A new type of replacement expression, UPPER @-> PREFIX ... SUFFIX, yields a transducer that inserts text around strings that are instances of UPPER. The symbol ... denotes the matching part of the input which itself remains unchanged. PREFIX and SUFFIX are regular expressions describing the insertions. Expressions of the type UPPER @-> PREFIX ... SUFFIX may be used to compose a deterministic parser for a ``local grammar'' in the sense of Gross (1989). Other useful applications of directed replacement include tokenization and filtering of text streams.

  11. Immediate natural tooth pontic: A viable yet temporary prosthetic solution: A patient reported outcome

    Directory of Open Access Journals (Sweden)

    Sudhir Bhandari

    2012-01-01

    Conclusion: The concept of immediate pontic placement is surely a viable treatment option and promises an excellent transient esthetic solution for a lost tooth as well as enables good preparation of the extraction site for future prosthetic replacement.

  12. Atypical Odontalgia (Phantom Tooth Pain)

    Science.gov (United States)

    ... Odontalgia Atypical odontalgia, also known as atypical facial pain, phantom tooth pain, or neuropathic orofacial pain, is characterized by chronic pain in a tooth or teeth, or in a site where teeth ...

  13. Anti Cariogenic Efficacy of Herbal and Conventional Tooth Pastes - A Comparative In-Vitro Study

    OpenAIRE

    K.P., Mohankumar; N K, Priya; G S, Madhushankari

    2013-01-01

    Background: An upsurge of herbal products in various catalogues of fast moving consumer goods is evident. Dental creams or pastes which have numerous brands since years, have addition of many more herbal tooth pastes. Main claim of these herbal tooth pastes being effective reduction in cavities and plaque control. Proven fact is that proper brushing with a tooth brush and tooth paste brings down the caries incidence, and there is a substantial amount of contribution made by indispensable ing...

  14. Effects of replacing roughage with soy hulls on feeding behavior and milk production of dairy cows under hot weather conditions.

    Science.gov (United States)

    Halachmi, I; Maltz, E; Livshin, N; Antler, A; Ben-Ghedalia, D; Miron, J

    2004-07-01

    Two total mixed rations (TMR) containing different proportions of roughage neutral detergent fiber (NDF) were fed to lactating cows under Israeli summer conditions, and the effects on feeding behavior and milk production were measured. Forty-two lactating cows were divided into 2 groups fed ad libitum a TMR containing either 18% NDF of roughage origin (control group) or only 12% roughage NDF, in which the corn silage component (16.5% of dry matter [DM]) was replaced with soy hulls (experiment group). This and additional adjustments in TMR were reflected in higher net energy for lactation and in vitro digestibility of the experimental TMR. Cow behavior was investigated at the feeding lane during June 2001; about 11,000 cow visits were analyzed. Feed intake per meal and average meal duration were significantly higher in the experiment group (1.51 kg of DM per meal and 12.1 min per meal, respectively) as compared with the control group (1.22 kg of DM per meal and 9.47 min per meal, respectively). However, number of meals per day recorded in the feeding lane was significantly higher in the control group (21.0 vs. 16.6 meals/d per cow). Distribution of meals and feed intake along the day depended more on management practices, such as milking and feed dispensing times, than on feed composition or weather conditions. These differences between groups were expressed in similar daily eating duration (approximately 200 min), and because the rate of feed consumption was similar for both treatments (approximately 127 g DM/min), the daily average DM intake was also similar (25.0 to 25.7 kg). However, NDF intake was higher in the experiment group. Consequently, the average milk yield was higher in the experimental group, and production of milk fat, 4% fat-corrected milk, and economically corrected milk were significantly higher in the experiment group than in the control group. Data imply that the experimental TMR containing only 12% NDF of roughage origin is more suitable for

  15. Tooth development in Ambystoma mexicanum: phosphatase activities, calcium accumulation and cell proliferation in the tooth-forming tissues.

    Science.gov (United States)

    Wistuba, Joachim; Ehmcke, Jens; Clemen, Günter

    2003-06-01

    Prerequisites of tooth formation, cell proliferation in the tooth-forming tissues, calcium accumulation and the enzymatic activities of alkaline (ALP) and acid phosphatases (ACP) were investigated by immunohistochemical and histochemical methods in various developmental stages of the Mexican Axolotl, Ambystoma mexicanum. During the growth of replacement teeth, the tooth-forming tissues continually recruit cells from the surrounding regions. The basal layer of the oral epithelium, the dental lamina and sometimes even the outer enamel epithelium provide cells for the differentiated inner enamel epithelium, in which the active ameloblasts are localized. The differentiating odontoblasts are derived from proliferating cells situated basally to the replacement teeth in the mesenchymal tissue. When differentiation has started and the cells have become functional, proliferative activity can no longer be observed. Calcium is accumulated close to the site of mineralization in the inner enamel epithelium and in the odontoblasts as it is in mammals, elasmobranchii and teleostei. The activities of ACP and ALP related to the mineralization of the replacement teeth are separated spatially and not sequentially as they are in mammals. However, the results indicate a similar function of these enzymatic components in relation to tooth formation and maturation of mineral deposition. Most of the substantial processes related to tooth formation reported from other vertebrates occur in a manner similar to that in Ambystoma mexicanum, but there also seem to be basic mechanisms present that are realised in a unique way in this urodele.

  16. Insulin fails to enhance mTOR phosphorylation, mitochondrial protein synthesis, and ATP production in human skeletal muscle without amino acid replacement.

    Science.gov (United States)

    Barazzoni, Rocco; Short, Kevin R; Asmann, Yan; Coenen-Schimke, Jill M; Robinson, Matthew M; Nair, K Sreekumaran

    2012-11-01

    Systemic insulin administration causes hypoaminoacidemia by inhibiting protein degradation, which may in turn inhibit muscle protein synthesis (PS). Insulin enhances muscle mitochondrial PS and ATP production when hypoaminoacidemia is prevented by exogenous amino acid (AA) replacement. We determined whether insulin would stimulate mitochondrial PS and ATP production in the absence of AA replacement. Using l-[1,2-¹³C]leucine as a tracer, we measured the fractional synthetic rate of mitochondrial as well as sarcoplasmic and mixed muscle proteins in 18 participants during sustained (7-h) insulin or saline infusion (n = 9 each). We also measured muscle ATP production, mitochondrial enzyme activities, mRNA levels of mitochondrial genes, and phosphorylation of signaling proteins regulating protein synthesis. The concentration of circulating essential AA decreased during insulin infusion. Mitochondrial, sarcoplasmic, and mixed muscle PS rates were also lower during insulin (2-7 h) than during saline infusions despite increased mRNA levels of selected mitochondrial genes. Under these conditions, insulin did not alter mitochondrial enzyme activities and ATP production. These effects were associated with enhanced phosphorylation of Akt but not of protein synthesis activators mTOR, p70(S6K), and 4EBP1. In conclusion, sustained physiological hyperinsulinemia without AA replacement did not stimulate PS of mixed muscle or protein subfractions and did not alter muscle mitochondrial ATP production in healthy humans. These results support that insulin and AA act in conjunction to stimulate muscle mitochondrial function and mitochondrial protein synthesis.

  17. Replacing alfalfa silage with corn silage in dairy cow diets: Effects on enteric methane production, ruminal fermentation, digestion, N balance, and milk production.

    Science.gov (United States)

    Hassanat, F; Gervais, R; Julien, C; Massé, D I; Lettat, A; Chouinard, P Y; Petit, H V; Benchaar, C

    2013-07-01

    The objective of this study was to determine the effects of replacing alfalfa silage (AS) with corn silage (CS) in dairy cow total mixed rations (TMR) on enteric CH4 emissions, ruminal fermentation characteristics, apparent total-tract digestibility, N balance, and milk production. Nine ruminally cannulated lactating cows were used in a replicated 3×3 Latin square design (32-d period) and fed (ad libitum) a TMR [forage:concentrate ratio of 60:40; dry matter (DM) basis], with the forage portion consisting of either alfalfa silage (0% CS; 56.4% AS in the TMR), a 50:50 mixture of both silages (50% CS; 28.2% AS and 28.2% CS in the TMR), or corn silage (100% CS; 56.4% CS in the TMR). Increasing the CS proportion (i.e., at the expense of AS) in the diet was achieved by decreasing the corn grain proportion and increasing that of soybean meal. Intake of DM and milk yield increased quadratically, whereas DM digestibility increased linearly as the proportion of CS increased in the diet. Increasing the dietary CS proportion resulted in changes (i.e., lower ruminal pH and acetate:propionate ratio, reduced fiber digestibility, decreased protozoa numbers, and lower milk fat and higher milk protein contents) typical of those observed when cows are fed high-starch diets. A quadratic response in daily CH4 emissions was observed in response to increasing the proportion of CS in the diet (440, 483, and 434 g/d for 0% CS, 50% CS, and 100% CS, respectively). Methane production adjusted for intake of DM, and gross or digestible energy was unaffected in cows fed the 50% CS diet, but decreased in cows fed the 100% CS diet (i.e., quadratic effect). Increasing the CS proportion in the diet at the expense of AS improved N utilization, as reflected by the decreases in ruminal NH3 concentration and manure N excretion, suggesting low potential NH3 and N2O emissions. Results from this study, suggest that total replacement of AS with CS in dairy cow diets offers a means of decreasing CH4 output

  18. The Rachitic Tooth

    Science.gov (United States)

    Nociti, Francisco H.; Somerman, Martha J.

    2014-01-01

    Teeth are mineralized organs composed of three unique hard tissues, enamel, dentin, and cementum, and supported by the surrounding alveolar bone. Although odontogenesis differs from osteogenesis in several respects, tooth mineralization is susceptible to similar developmental failures as bone. Here we discuss conditions fitting under the umbrella of rickets, which traditionally referred to skeletal disease associated with vitamin D deficiency but has been more recently expanded to include newly identified factors involved in endocrine regulation of vitamin D, phosphate, and calcium, including phosphate-regulating endopeptidase homolog, X-linked, fibroblast growth factor 23, and dentin matrix protein 1. Systemic mineral metabolism intersects with local regulation of mineralization, and factors including tissue nonspecific alkaline phosphatase are necessary for proper mineralization, where rickets can result from loss of activity of tissue nonspecific alkaline phosphatase. Individuals suffering from rickets often bear the additional burden of a defective dentition, and transgenic mouse models have aided in understanding the nature and mechanisms involved in tooth defects, which may or may not parallel rachitic bone defects. This report reviews dental effects of the range of rachitic disorders, including discussion of etiologies of hereditary forms of rickets, a survey of resulting bone and tooth mineralization disorders, and a discussion of mechanisms, known and hypothesized, involved in the observed dental pathologies. Descriptions of human pathology are augmented by analysis of transgenic mouse models, and new interpretations are brought to bear on questions of how teeth are affected under conditions of rickets. In short, the rachitic tooth will be revealed. PMID:23939820

  19. Pneumomediastinum after Tooth Extraction

    OpenAIRE

    Ilhan Ocakcioglu; Serhat Koyuncu; Mustafa Kupeli; Oguzhan Bol

    2016-01-01

    Pneumomediastinum is defined as the presence of air in mediastinum. Pneumomediastinum can sometimes occur after surgery. Pneumomediastinum seen after dental procedures is rare. We presented the case of subcutaneous emphysema developed in the neck and upper chest after tooth extraction and discussed the possible mechanisms of pneumomediastinum.

  20. A 10-Year Prospective Study of Single Tooth Implants Placed in the Anterior Maxilla

    DEFF Research Database (Denmark)

    Gotfredsen, Klaus

    2012-01-01

    in this study. Ten implants were placed with an early placement protocol, that is, 4 weeks after tooth extraction, whereas the other 10 implants were placed with a conventional delayed placement protocol, for example, 12 weeks after tooth extraction. At the baseline and at the annual re-examinations, pain from......Purpose: The aim of the study was to evaluate the biological and technical outcomes of early and delayed placed single tooth implants after 10 years of follow-up. Materials and Methods: Twenty consecutive patients who needed a single tooth replacement in the anterior maxilla were included...

  1. Knee Replacement

    Science.gov (United States)

    ... need knee replacement surgery usually have problems walking, climbing stairs, and getting in and out of chairs. Some ... a total living space on one floor since climbing stairs can be difficult. Install safety bars or a ...

  2. Replacing penalties

    Directory of Open Access Journals (Sweden)

    Vitaly Stepashin

    2017-01-01

    Full Text Available УДК 343.24The subject. The article deals with the problem of the use of "substitute" penalties.The purpose of the article is to identify criminal and legal criteria for: selecting the replacement punishment; proportionality replacement leave punishment to others (the formalization of replacement; actually increasing the punishment (worsening of legal situation of the convicted.Methodology.The author uses the method of analysis and synthesis, formal legal method.Results. Replacing the punishment more severe as a result of malicious evasion from serving accused designated penalty requires the optimization of the following areas: 1 the selection of a substitute punishment; 2 replacement of proportionality is serving a sentence other (formalization of replacement; 3 ensuring the actual toughening penalties (deterioration of the legal status of the convict. It is important that the first two requirements pro-vide savings of repression in the implementation of the replacement of one form of punishment to others.Replacement of punishment on their own do not have any specifics. However, it is necessary to compare them with the contents of the punishment, which the convict from serving maliciously evaded. First, substitute the punishment should assume a more significant range of restrictions and deprivation of certain rights of the convict. Second, the perfor-mance characteristics of order substitute the punishment should assume guarantee imple-mentation of the new measures.With regard to replacing all forms of punishment are set significant limitations in the application that, in some cases, eliminates the possibility of replacement of the sentence, from serving where there has been willful evasion, a stricter measure of state coercion. It is important in the context of the topic and the possibility of a sentence of imprisonment as a substitute punishment in cases where the original purpose of the strict measures excluded. It is noteworthy that the

  3. Single-tooth replacement in the anterior arch with a cantilevered IPS e.max press fixed-partial dentures for aged patients: 6 years follow-up%e.Max全瓷贴面单端翼板桥在老年患者前牙弓单颗牙缺失中的6年应用效果评价

    Institute of Scientific and Technical Information of China (English)

    孙强; 王冠超; 何天鹏; 李婧

    2012-01-01

    Objective:To evaluated the clinical outcomes of cantilevered veneer-retained fixed partial dentures (VRFPDs) fabricated with IPS e.max Press for single-tooth replacement in the anterior arch for the aged patients.Methods:A total of 13 patients were treated with VRFPDs,including 4 cases in the maxilla and 9 in the mandible.The patients were evaluated at baseline and annually from October 2005 to Sep 2012 for the integrity of the VRFPDs,proximal contacts,occulsal relationships,pulp vitality,and tooth mobility.The degree of satisfaction was indicated with a visual analog scale.Results:During a mean observation time of 60.5 months,13 VRFPDs on vital abutment teeth did not exhibit postoperative sensitivity or secondary caries.No fractures or chipping of the restorations occurred within the course of the evaluation.No patient complained of food impaction.One cantilevered pontic needed adjustment on the incisal edge due to premature contacts after the 3-year recall examination.Conclusion:Cantilevered IPS e.max Press VRFPDs should be considered as minimally invasive,single-tooth restorative strategy in the anterior arch for the aged patients.Longer observation periods are necessary before this type of restorative design can be recommended as a general conservative procedure.%目的:通过e.Max单端全瓷翼板桥修复老年患者单颗前牙缺失,并对其中短期临床应用效果进行评价,为其临床应用提供参考依据.方法:选择于2005年10月-2012年9月之间就诊于中日友好医院口腔医学中心.共入组13人,其中男性8人,平均62.2岁;女性5人,平均64.3岁.恢复上颌侧切牙3例,上颌第一前磨牙1例;恢复下颌中切牙5例,下颌侧切牙4例;应用Variolink Ⅱ作为树脂粘接剂,常规进行粘接.针对修复体的完整性、邻接关系、咬合关系和基牙牙髓活力以及患者的满意度进行每年一次的随访.结果:平均观察期为60.5个月,所有修复体无1例表现术后敏感和继发龋,

  4. REPCO 501452 : Replacement of copper fungicides in organic production of grapevine and apple in Europe : publishable final activity report

    NARCIS (Netherlands)

    Köhl, J.

    2007-01-01

    Final Activity Report: The objective of REPCO was to contribute to the replacement of copper fungicides in organic agriculture by new measures for control of downy mildew (Plasmopara viticola) in grapevine and scab (Venturia inaequalis) in apple. Both major European organic crops strongly depend on

  5. Odontogenic differentiation of adipose-derived stem cells for tooth regeneration: necessity, possibility, and strategy.

    Science.gov (United States)

    Jing, Wei; Wu, Ling; Lin, Yunfeng; Liu, Lei; Tang, Wei; Tian, Weidong

    2008-01-01

    Tooth regeneration using tissue engineering concepts is a promising biological approach to solving problems of tooth loss in elderly patients. The seeding cells, however, for tooth regeneration such as odontoblasts from dental germ, stem cells from dental pulp and deciduous teeth, and ectomesenchymal cells from the first branchial arch are difficult, even impossible to harvest in clinic. Bone marrow mesenchymal stem cells have odontogenic capacity, but their differentiation abilities significantly decrease with the increasing age of the donors. Therefore, the cells mentioned above are not practical in the clinical application of tooth regeneration in the old. Adipose derived stem cells have many clinical advantages over bone marrow mesenchymal stem cells, and their differentiation potential can be maintained with aging. Here we propose the hypothesis that adipose derived stem cells could be induced into odontogenic lineage and might be used as suitable seeding cells for tooth regeneration to replace the lost tooth of elderly patients.

  6. Saw-tooth cardiomyopathy

    Directory of Open Access Journals (Sweden)

    Karatza Ageliki A

    2009-12-01

    Full Text Available Abstract We present an unusual case of cardiomyopathy in a two month old male infant with a grade-I systolic murmur. Echocardiographic examination disclosed left ventricular (LV, dysplasia with saw-tooth like inwards myocardial projections extending from the lateral walls towards the LV cavity. There was mild LV systolic dysfunction with apical hypokinesia. Cardiovascular magnetic resonance demonstrated in detail these cross bridging muscular projections originating from the inferior interventricular septum and lateral LV wall, along with areas of hypokinesis at the LV septum and apex in a noncoronary distribution, without any late gadolinium enhancement. We have termed this condition saw-tooth cardiomyopathy because of the very characteristic appearance.

  7. Tooth in oropharynx

    OpenAIRE

    Nagarajappa, D; B S Manjunatha

    2011-01-01

    The incidence of ectopic teeth has increased. In many cases, the etiology of ectopic teeth cannot be identified. Ectopic tooth in deciduous dentition period is very rare and information is limited about its causes and characteristics. The conditions commonly associated with an increased prevalence of ectopic teeth include cleft lip and palate, cleidocranial dysplasia, and Gardner syndrome. The diagnosis is made by the clinical and radiological examinations. The indication for extraction in ec...

  8. Solving tooth sensitivity.

    Science.gov (United States)

    Miller, Michael B

    2010-01-01

    Solving tooth sensitivity requires both you and the patients to be resilient and to understand that if one approach doesn't work, you can try another one that is non-invasive or, at worst, minimally invasive. Much like the clinician who posted the original question, I strongly believe that it is our responsibility to convince patients that jumping to a radical solution could be totally unnecessary--and expensive-- and still might not solve the problem.

  9. Esophageal replacement.

    Science.gov (United States)

    Kunisaki, Shaun M; Coran, Arnold G

    2017-04-01

    This article focuses on esophageal replacement as a surgical option for pediatric patients with end-stage esophageal disease. While it is obvious that the patient׳s own esophagus is the best esophagus, persisting with attempts to retain a native esophagus with no function and at all costs are futile and usually detrimental to the overall well-being of the child. In such cases, the esophagus should be abandoned, and the appropriate esophageal replacement is chosen for definitive reconstruction. We review the various types of conduits used for esophageal replacement and discuss the unique advantages and disadvantages that are relevant for clinical decision-making. Copyright © 2017 Elsevier Inc. All rights reserved.

  10. Utilization of fermented animal by-product blend as fishmeal replacer in the diet of Labeo rohita

    Directory of Open Access Journals (Sweden)

    Ayan Samaddar

    2015-05-01

    Full Text Available Experiments were carried out to evaluate efficiency of Labeo rohita to utilize fermented animal protein blend containing slaughter house blood (SHB and fish offal (FO as dietary fishmeal (FM replacer. Five isoproteic (30%, isolipidic (8% and isoenergitic (15.00 kJ g−1 feed were prepared by replacing 0 (T1, 25 (T2, 50 (T3, 75 (T4 and 100% (T5 FM protein with the fermented blend and fingerlings of L. rohita (mean weight 2.07 g were fed each of these feed in triplicate groups. The results showed that apparent digestibility coefficient (ADC of protein significantly increased in T3–T5, while ADC of lipid and total amino acid absorption rate increased in T2–T5 as compared to control (T1. Among the essential amino acids (EAA, arginine exhibited maximum absorption followed by histidine, phenylalanine, valine and lysine while aspartic acid showed a high absorption among the non-essential amino acids (NAA. Fish fed up to 75% of replacement level (T4 did not show any significant difference (P < 0.05 in weight gain (WG, specific growth rate (SGR, feed conversion ratio (FCR, protein efficiency ratio (PER and apparent net protein utilization (ANPU between the dietary groups (T1–T4. But FCR was increased and other growth parameters were significantly reduced in 100% replacement group (T5, while body muscle protein was significantly reduced in both T4 and T5. Deposition of EAA (except histidine and methionine in T4 and NAA (except cystine in both T4 and T5 in the muscle of fish were also significantly reduced as compared to control (T1. Multi-objective optimization programming technique was used to determine FM replacement level that optimized all the growth parameters (WG, SGR, FCR and PER simultaneously. By using Global Criterion method, it was obtained that 21.11% replacement of FM by the fermented blend was ideal for optimum growth of L. rohita.

  11. Decoronation for the management of an ankylosed young permanent tooth.

    Science.gov (United States)

    Sapir, Shabtai; Shapira, Joseph

    2008-02-01

    Replacement resorption rate is a variable process, and is dependent on age, basal metabolic rate, extra-alveolar time, treatment prior to replantation, amount of root dentin, severity of trauma, and extent of periodontal ligament necrosis. In patients 7-16 years old a tooth is lost 3-7 years after the onset of root resorption. The complications that may develop as a consequence of ankylosis of a permanent incisor in children are due to the inevitable early loss of the traumatized tooth and local arrest of alveolar bone development. An ankylosed tooth should be removed before the changes become so pronounced that they compromise future prosthetic treatment. The treatment options may involve: interceptive regenerative treatment, early extraction of the ankylosed tooth, orthodontic space closure, intentional replantation, extraction of the ankylosed tooth followed with immediate ridge augmentation/preservation, auto-transplantation, single tooth dento-osseous osteotomy, and decoronation. The purpose of this article was to review the considerations involved in the decision-making concerning the use of the decoronation technique for the treatment of a permanent incisor diagnosed as ankylosed.

  12. In vitro degradability and total gas production of biodiesel chain byproducts used as a replacement for cane sugar feed

    OpenAIRE

    2014-01-01

    This study aimed to determine the in vitro degradability of dry matter and the total gas production of oil seed press cake from biodiesel production (Gossypium hirsutum L., Helianthus annuus L., Ricinus communis, Moringa oleífera L. and Pinhão manso curcas L.) at four different levels of replacement (0, 30, 50, and 70%) for cane sugar (Saccharum officinarum RB.) in ruminant feed. Inocula were prepared using the ruminal fluid of three Holstein cows, and data were collected after 48 hours of in...

  13. REPCO 501452 : Replacement of copper fungicides in organic production of grapevine and apple in Europe : publishable final activity report

    OpenAIRE

    Köhl, J

    2007-01-01

    Final Activity Report: The objective of REPCO was to contribute to the replacement of copper fungicides in organic agriculture by new measures for control of downy mildew (Plasmopara viticola) in grapevine and scab (Venturia inaequalis) in apple. Both major European organic crops strongly depend on copper fungicides. Permitted amounts will be reduced stepwise in the years ahead (Council Regulation (EEC) 2092/91, Annex II) to avoid environmental risks. In European countries where copper fungic...

  14. Effects of pistachio by-products in replacement of alfalfa hay on populations of rumen bacteria involved in biohydrogenation and fermentative parameters in the rumen of sheep.

    Science.gov (United States)

    Ghaffari, M H; Tahmasbi, A-M; Khorvash, M; Naserian, A-A; Ghaffari, A H; Valizadeh, H

    2014-06-01

    The objective of this study was to investigate the effect of sundried pistachio by-products (PBP) as a replacement of alfalfa hay (AH) on blood metabolites, rumen fermentation and populations of rumen bacteria involved in biohydrogenation (BH) in Baluchi sheep. Four adult male Baluchi sheep (41 ± 1.3 kg, BW) fitted with ruminal cannulae were randomly assigned to four experimental diets in a 4 × 4 Latin square design. The dietary treatments were as follows: (i) control, (ii) 12% PBP (0.33 of AH in basal diet replaced by PBP), (iii) 24% PBP (0.66 of AH in basal diet replaced by PBP) and (iv) 36% PBP (all of AH in basal diet replaced by PBP). The basal diet was 360 g/kg dry matter (DM) alfalfa hay, 160 g/kg DM wheat straw and 480 g/kg DM concentrate. The trial consisted of four periods, each composed of 16 days adaptation and 4 days data collection including measurement of blood metabolites, rumen fermentation and population of bacteria. No differences were observed in rumen pH among the treatments, while rumen ammonia-N concentrations were decreased (p< 0.05) with increasing PBP by up to 36% DM of the diets. Using of 36% PBP in the diet reduced (p < 0.05) total volatile fatty acids (VFA) concentrations and the molar proportion of acetate, while the concentration of propionate, butyrate and acetate to propionate ratio were similar to all other treatments. The concentration of blood urea nitrogen (BUN) decreased (p < 0.01) with increasing PBP by up to 36% DM in the diets of sheep. However, other blood metabolites were not affected by the experimental diets. It was concluded that PBP in replacement of AH had no effects on the relative abundance of Butyrivibrio fibrisolvens and Butyrivibrio proteoclasticus in relation to the control diet.

  15. Xanthan gum as a fat replacer in goshtaba-a traditional meat product of India: effects on quality and oxidative stability.

    Science.gov (United States)

    Rather, Sajad A; Masoodi, F A; Akhter, Rehana; Gani, Adil; Wani, S M; Malik, A H

    2015-12-01

    Goshtaba is a restructured meat product of Kashmiri wazwan prepared from meat emulsion with added fat (20 %), salt, spices and condiments and cooked in the curd. The present study was undertaken for the development of low fat goshtaba with the addition of xanthan gum as a fat replacer and was evaluated for proximate composition, pH, colour, lipid and protein oxidation, texture, microstructure and sensory properties. Low fat goshtaba formulations containing xanthan gum were higher in protein and moisture contents but, lower in fat content and pH value than the high fat control (p product containing 1.5 % xanthan gum. SEM results indicate that xanthan gum lead to formation of an additional gel network which holds more water. Sensory evaluation revealed that goshtaba product with 0.5 % xanthan gum had quality characteristics that were similar to the control product containing 20 % fat.

  16. Successful autotransplantation of a mature mesiodens to replace a traumatized maxillary central incisor.

    Science.gov (United States)

    Dharmani, U; Rajput, A; Kamal, C; Talwar, S; Verma, M

    2015-06-01

    This case describes the successful transplantation of a mature mesiodens tooth to replace a traumatized maxillary central incisor. A 17-year-old male attended 1 week after a traumatic injury to his left maxillary central incisor (tooth 21). Radiographs revealed a horizontal root fracture and a poor prognosis. The tooth was atraumatically removed and replaced with a mesiodens lying in the same region. After stabilization, root canal treatment was performed and aesthetics were restored with a tooth coloured restoration. A 2-year follow-up revealed the tooth had good aesthetics and function. A supernumerary nonfunctional tooth such as a mesiodens can be successfully used to replace a missing permanent tooth by autotransplantation. Autotransplantation has a high success rate if case selection is good, appropriate surgery is carried out and excellent hygiene is maintained. Autotransplantation should be considered as one of the most biologic techniques for replacing a missing tooth with minimal cost. Autotransplantation can be carried out even after complete root formation in the donor tooth. © 2014 International Endodontic Journal. Published by John Wiley & Sons Ltd.

  17. Pineapple by-product and canola oil as partial fat replacers in low-fat beef burger: Effects on oxidative stability, cholesterol content and fatty acid profile.

    Science.gov (United States)

    Selani, Miriam M; Shirado, Giovanna A N; Margiotta, Gregório B; Rasera, Mariana L; Marabesi, Amanda C; Piedade, Sonia M S; Contreras-Castillo, Carmen J; Canniatti-Brazaca, Solange G

    2016-05-01

    The effect of freeze-dried pineapple by-product and canola oil as fat replacers on the oxidative stability, cholesterol content and fatty acid profile of low-fat beef burgers was evaluated. Five treatments were performed: conventional (CN, 20% fat) and four low-fat formulations (10% fat): control (CT), pineapple by-product (PA), canola oil (CO), and pineapple by-product and canola oil (PC). Low-fat cooked burgers showed a mean cholesterol content reduction of 9.15% compared to the CN. Canola oil addition improved the fatty acid profile of the burgers, with increase in the polyunsaturated/saturated fatty acids ratio and decrease in the n-6/n-3 ratio, in the atherogenic and thrombogenic indexes. The oxidative stability of the burgers was affected by the vegetable oil addition. However, at the end of the storage time (120 days), malonaldehyde values of CO and PC were lower than the threshold for the consumer's acceptance. Canola oil, in combination with pineapple by-product, can be considered promising fat replacers in the development of healthier burgers.

  18. Influence of tooth profile on the noncircular gear tooth contact

    Science.gov (United States)

    Cristescu, A.; Andrei, L.; Cristescu, B.

    2017-02-01

    With noncircular gears, the continuous modification of the tooth meshing, in terms of variation of the tooth profiles and the line of action position and inclination, makes difficult the implementation of a general standard procedure for the analysis of the noncircular gears tooth contact. In this paper, the authors present a graphical approach that enables the tooth contact static pattern to be produced and evaluated in case of a noncircular gear with complex geometry of the pitch curve. The study is virtually developed, in AutoCAD environment, by animating and investigating the gear solid models in mesh. The tooth static contact analysis enables the path of contact area and distribution to be evaluated in correlation with the following variable initial data: gear pitch curve geometry, tooth profile geometry, as a consequence of different generating procedures, and the gear pressure angle. It was found out that the noncircular gear tooth contact could be improved by choosing different procedures for the tooth flank generation in concave and convex zones and by increasing the gear pressure angle.

  19. Safety issues of tooth whitening using peroxide-based materials.

    Science.gov (United States)

    Li, Y; Greenwall, L

    2013-07-01

    In-office tooth whitening using hydrogen peroxide (H₂O₂) has been practised in dentistry without significant safety concerns for more than a century. While few disputes exist regarding the efficacy of peroxide-based at-home whitening since its first introduction in 1989, its safety has been the cause of controversy and concern. This article reviews and discusses safety issues of tooth whitening using peroxide-based materials, including biological properties and toxicology of H₂O₂, use of chlorine dioxide, safety studies on tooth whitening, and clinical considerations of its use. Data accumulated during the last two decades demonstrate that, when used properly, peroxide-based tooth whitening is safe and effective. The most commonly seen side effects are tooth sensitivity and gingival irritation, which are usually mild to moderate and transient. So far there is no evidence of significant health risks associated with tooth whitening; however, potential adverse effects can occur with inappropriate application, abuse, or the use of inappropriate whitening products. With the knowledge on peroxide-based whitening materials and the recognition of potential adverse effects associated with the procedure, dental professionals are able to formulate an effective and safe tooth whitening regimen for individual patients to achieve maximal benefits while minimising potential risks.

  20. Stem cell-based biological tooth repair and regeneration.

    Science.gov (United States)

    Volponi, Ana Angelova; Pang, Yvonne; Sharpe, Paul T

    2010-12-01

    Teeth exhibit limited repair in response to damage, and dental pulp stem cells probably provide a source of cells to replace those damaged and to facilitate repair. Stem cells in other parts of the tooth, such as the periodontal ligament and growing roots, play more dynamic roles in tooth function and development. Dental stem cells can be obtained with ease, making them an attractive source of autologous stem cells for use in restoring vital pulp tissue removed because of infection, in regeneration of periodontal ligament lost in periodontal disease, and for generation of complete or partial tooth structures to form biological implants. As dental stem cells share properties with mesenchymal stem cells, there is also considerable interest in their wider potential to treat disorders involving mesenchymal (or indeed non-mesenchymal) cell derivatives, such as in Parkinson's disease.

  1. Evaluation of biochemical parameters and productive performance of japanese quail in response to the replacement of soybean meal with canola meal

    Directory of Open Access Journals (Sweden)

    Ali Asghar Saki

    2017-02-01

    Full Text Available The present study was conducted to evaluation the different levels canola meal (CM replacement by soybean meal (SBM in Japanese quails diets on productive performance, egg quality trails and blood parameters including blood protein, minerals concentration, liver enzymes and thyroid hormones. In this study, 160 of Japanese quails in second laying phase from 46 to 56 weeks of age were divided in four treatments with four replicates and 10 quail in each per replicate, on a completely randomized design (CRD.Treatments consisted:T1 control (without CM, T2, T3 and T4 replacing 30, 60 and 90% of SBM with CM respectively. The results were shown no significant variation in body weight between treatments in initial and end of the experiment (p > 0.05. There was significant decrease in feed intake by increasing level of CM (p 0.05. However, the egg shell thickness showed significantly decreased with increasing levels of canola meal in the diet  (p < 0.05. According to this study results, 30% replacement of SBM by CM in the diet (contained 10% CM has no adverse effect on quail’s performance.

  2. Effects of replacing maize meal with rumen filtrate-fermented cassava meal on growth and egg production performance in Japanese quails (Cortunix japonica

    Directory of Open Access Journals (Sweden)

    Francisco Kanyinji

    2014-09-01

    Full Text Available This study was conducted to evaluate the effects of replacing maize in quail diets with graded levels of rumen filtrate-fermented cassava meal (FCM on growth and egg production performances. Cassava meal (CM was mixed with dried manure of layer at 75 g/kg CM, which was mixed with freshly collected rumen filtrate (at 1 L/5 kg CM, and finally fermented in sealed bags for 14 days. It was then sun-dried and added in grower or finisher diets at 0, 50, 75 and 100%. Then, 84 three weeks-old Japanese quails (Cortunix japonica were divided into four equal groups; the birds were randomly assigned to 0, 50, 75 and 100% FCM grower/layers diets, and were reared until 56 days of age. Daily feed consumption, weekly body weights, weight gains, feed conversion ratios (FCR, hen-day, and egg weights were monitored. The quails fed with 75% FCM were found to be superior (p0.05 effect on feed intake, body weight, and weight gain, as compared to those of fed control diets. Thus, replacing maize with FCM had no deleterious effects on growth performance, but depressed hen-day. However, better growth performance was obtained when maize was replaced at 75% FCM.

  3. Replacement of fish meal by poultry by-product meal, food grade, in diets for juvenile spotted rose snapper (Lutjanus guttatus

    Directory of Open Access Journals (Sweden)

    Crisantema Hernández

    2014-03-01

    Full Text Available The feasibility of replacing fish meal protein at different levels with poultry by product meal food grade (PBM-FG was assessed in diets for spotted rose snapper Lutjanus guttatus. Four diets were formulated, the control diet fish meal was used as the main protein source (FM; the other three diets had increasing levels of PBM-FG replacing 25, 50 or 75% of the fish meal protein respectively. The diets were fed close to apparent satiation, three times a day to quadruplicate groups of juvenile snapper (average body weight 11.0 ± 0.04 g. The fish were randomly distributed into groups of 15 fish in a 120 L seawater tank. The response of snapper to diets containing graded levels of fish meal was evaluated by measuring weight gain, feed efficiency, body composition, hematological parameters and apparent nutrient digestibility during a 12-week period. The replacing of the 25% of fish meal protein by PBM-FG did show a similar trend for feed efficiency and growth performance than control diet. Feed efficiency and growth performance was reduced at 75% level of fish meal protein replacement by PBM-FG, due to deficiencies of lysine and methionine. The final whole-body proximate composition did not differ among treatments. The hematological characteristics were similar among the treatments control, 25 and 50%, but the fish fed PBM-FG 75% showed the lowest levels for total protein and glucose parameters. The dietary dry matter and protein apparent digestibility coefficients (ADCs decreased with increasing dietary PBM-FG. High values for lipid ADCs were observed in all diets.

  4. Replacement of Soybean Meal with Animal Origin Protein Meals Improved Ramoplanin A2 Production by Actinoplanes sp. ATCC 33076.

    Science.gov (United States)

    Erkan, Deniz; Kayali, Hulya Ayar

    2016-09-01

    Ramoplanin A2 is the last resort antibiotic for treatment of many high morbidity- and mortality-rated hospital infections, and it is expected to be marketed in the forthcoming years. Therefore, high-yield production of ramoplanin A2 gains importance. In this study, meat-bone meal, poultry meal, and fish meal were used instead of soybean meal for ramoplanin A2 production by Actinoplanes sp. ATCC 33076. All animal origin nitrogen sources stimulated specific productivity. Ramoplanin A2 levels were determined as 406.805 mg L(-1) in fish meal medium and 374.218 mg L(-1) in poultry meal medium. These levels were 4.25- and 4.09-fold of basal medium, respectively. However, the total yield of poultry meal was higher than that of fish meal, which is also low-priced. In addition, the variations in pH levels, protein levels, reducing sugar levels, extracellular protease, amylase and lipase activities, and intracellular free amino acid levels were monitored during the incubation period. The correlations between ramoplanin production and these variables with respect to the incubation period were determined. The intracellular levels of L-Phe, D-Orn, and L-Leu were found critical for ramoplanin A2 production. The strategy of using animal origin nitrogen sources can be applied for large-scale ramoplanin A2 production.

  5. The junctional epithelium originates from the odontogenic epithelium of an erupted tooth.

    Science.gov (United States)

    Yajima-Himuro, Sara; Oshima, Masamitsu; Yamamoto, Gou; Ogawa, Miho; Furuya, Madoka; Tanaka, Junichi; Nishii, Kousuke; Mishima, Kenji; Tachikawa, Tetsuhiko; Tsuji, Takashi; Yamamoto, Matsuo

    2014-05-02

    The junctional epithelium (JE) is an epithelial component that is directly attached to the tooth surface and has a protective function against periodontal diseases. In this study, we determined the origin of the JE using a bioengineered tooth technique. We transplanted the bioengineered tooth germ into the alveolar bone with an epithelial component that expressed green fluorescence protein. The reduced enamel epithelium from the bioengineered tooth fused with the oral epithelium, and the JE was apparently formed around the bioengineered tooth 50 days after transplantation. Importantly, the JE exhibited green fluorescence for at least 140 days after transplantation, suggesting that the JE was not replaced by oral epithelium. Therefore, our results demonstrated that the origin of the JE was the odontogenic epithelium, and odontogenic epithelium-derived JE was maintained for a relatively long period.

  6. Tooth loss caused by displaced elastic during simple preprosthetic orthodontic treatment

    Science.gov (United States)

    Dianiskova, Simona; Calzolari, Chiara; Migliorati, Marco; Silvestrini-Biavati, Armando; Isola, Gaetano; Savoldi, Fabio; Dalessandri, Domenico; Paganelli, Corrado

    2016-01-01

    The use of elastics to close a diastema or correct tooth malpositions can create unintended consequences if not properly controlled. The American Association of Orthodontists recently issued a consumer alert, warning of “a substantial risk for irreparable damage” from a new trend called “do-it-yourself” orthodontics, consisting of patients autonomously using elastics to correct tooth position. The elastics can work their way below the gums and around the roots of the teeth, causing damage to the periodontium and even resulting in tooth loss. The cost of implants to replace these teeth would well exceed the cost of proper orthodontic care. This damage could also occur in a dental office, when a general dentist tries to perform a simplified orthodontic correction of a minor tooth malposition. The present case report describes a case of tooth loss caused by a displaced intraoral elastic, which occurred during a simple preprosthetic orthodontic treatment. PMID:27672645

  7. Partial tooth gear bearings

    Science.gov (United States)

    Vranish, John M. (Inventor)

    2010-01-01

    A partial gear bearing including an upper half, comprising peak partial teeth, and a lower, or bottom, half, comprising valley partial teeth. The upper half also has an integrated roller section between each of the peak partial teeth with a radius equal to the gear pitch radius of the radially outwardly extending peak partial teeth. Conversely, the lower half has an integrated roller section between each of the valley half teeth with a radius also equal to the gear pitch radius of the peak partial teeth. The valley partial teeth extend radially inwardly from its roller section. The peak and valley partial teeth are exactly out of phase with each other, as are the roller sections of the upper and lower halves. Essentially, the end roller bearing of the typical gear bearing has been integrated into the normal gear tooth pattern.

  8. Thermal development of Cephalonomia tarsalis (Hymenoptera: Bethylidae) parasitoid of the saw-toothed stored product beetles of the genus Oryzaephilus sp. (Coleoptera: Sylvanidae).

    Science.gov (United States)

    Eliopoulos, Panagiotis A; Kontodimas, Dimitrios C

    2016-02-01

    The effect of temperature on the development and survival of Cephalonomia tarsalis (Ashmead) (Hymenoptera: Bethylidae), larval ectoparasitoid of beetles of Oryzaephilus sp. (Coleoptera: Silvanidae) was studied in the laboratory. Durations of the development of the egg, larva and pupa were measured in eight constant temperatures (15, 17.5, 20, 25, 30, 32.5, 35 and 37.5°C) parasitizing larvae of the saw-toothed beetle Oryzaephilus surinamensis (L.) (Coleoptera: Silvanidae). The duration of development was decreased with temperature increase within the range 17.5-32.5°C. Survival was higher when immatures were exposed to medium temperatures (20-30°C) compared with those lived in a more extreme temperature regime (30°C). Wasps failed to complete their development at 15 and 37.5°C. Thermal parameters (upper, lower and optimum developmental threshold, thermal constant) were estimated by fitting the linear and a non-linear (Logan I) model to our data. Upper and lower developmental thresholds ranged between 35.1-37.0°C and 13.2-13.8°C, respectively. The optimum temperature for development was estimated between 33.6°C and 34.6°C. Tests for developmental rate isomorphy (DRI) showed that change in the average proportion of time spent in each developmental stage was marginally significant, proving that development of C. tarsalis is probably incompatible with DRI. However, this conclusion is questionable given that lower developmental thresholds did not differ significantly among various developmental stages (bootstrap test). Thermal constant for total development was calculated 212.4 degree-days. Our results are discussed not only on the basis of thermal biology, but also of improving the efficiency of C. tarsalis as biocontrol agent.

  9. Abiotic tooth enamel

    Science.gov (United States)

    Yeom, Bongjun; Sain, Trisha; Lacevic, Naida; Bukharina, Daria; Cha, Sang-Ho; Waas, Anthony M.; Arruda, Ellen M.; Kotov, Nicholas A.

    2017-03-01

    Tooth enamel comprises parallel microscale and nanoscale ceramic columns or prisms interlaced with a soft protein matrix. This structural motif is unusually consistent across all species from all geological eras. Such invariability—especially when juxtaposed with the diversity of other tissues—suggests the existence of a functional basis. Here we performed ex vivo replication of enamel-inspired columnar nanocomposites by sequential growth of zinc oxide nanowire carpets followed by layer-by-layer deposition of a polymeric matrix around these. We show that the mechanical properties of these nanocomposites, including hardness, are comparable to those of enamel despite the nanocomposites having a smaller hard-phase content. Our abiotic enamels have viscoelastic figures of merit (VFOM) and weight-adjusted VFOM that are similar to, or higher than, those of natural tooth enamels—we achieve values that exceed the traditional materials limits of 0.6 and 0.8, respectively. VFOM values describe resistance to vibrational damage, and our columnar composites demonstrate that light-weight materials of unusually high resistance to structural damage from shocks, environmental vibrations and oscillatory stress can be made using biomimetic design. The previously inaccessible combinations of high stiffness, damping and light weight that we achieve in these layer-by-layer composites are attributed to efficient energy dissipation in the interfacial portion of the organic phase. The in vivo contribution of this interfacial portion to macroscale deformations along the tooth’s normal is maximized when the architecture is columnar, suggesting an evolutionary advantage of the columnar motif in the enamel of living species. We expect our findings to apply to all columnar composites and to lead to the development of high-performance load-bearing materials.

  10. Tooth tissue engineering: optimal dental stem cell harvest based on tooth development.

    Science.gov (United States)

    Duailibi, Monica Talarico; Duailibi, Silvio Eduardo; Duailibi Neto, Eduardo Felippe; Negreiros, Renata Matalon; Jorge, Waldyr Antonio; Ferreira, Lydia Masako; Vacanti, Joseph Phillip; Yelick, Pamela Crotty

    2011-07-01

    Our long-term objective is to devise reliable methods to generate biological replacement teeth exhibiting the physical properties and functions of naturally formed human teeth. Previously, we demonstrated the successful use of tissue engineering approaches to generate small, bioengineered tooth crowns from harvested pig and rat postnatal dental stem cells (DSCs). To facilitate characterizations of human DSCs, we have developed a novel radiographic staging system to accurately correlate human third molar tooth developmental stage with anticipated harvested DSC yield. Our results demonstrated that DSC yields were higher in less developed teeth (Stages 1 and 2), and lower in more developed teeth (Stages 3, 4, and 5). The greatest cell yields and colony-forming units (CFUs) capability was obtained from Stages 1 and 2 tooth dental pulp. We conclude that radiographic developmental staging can be used to accurately assess the utility of harvested human teeth for future dental tissue engineering applications. © 2011, Copyright the Authors. Artificial Organs © 2011, International Center for Artificial Organs and Transplantation and Wiley Periodicals, Inc.

  11. N2O release from agro-biofuel production negates global warming reduction by replacing fossil fuels

    Directory of Open Access Journals (Sweden)

    A. R. Mosier

    2007-08-01

    Full Text Available The relationship, on a global basis, between the amount of N fixed by chemical, biological or atmospheric processes entering the terrestrial biosphere, and the total emission of nitrous oxide (N2O, has been re-examined, using known global atmospheric removal rates and concentration growth of N2O as a proxy for overall emissions. The relationship, in both the pre-industrial period and in recent times, after taking into account the large-scale changes in synthetic N fertiliser production and deforestation, is consistent, showing an overall conversion factor of 3–5%. This factor is covered only in part by the ~1% of "direct" emissions from agricultural crop lands estimated by IPCC (2006, or the "indirect" emissions cited therein. This means that the extra N2O entering the atmosphere as a result of using N to produce crops for biofuels will also be correspondingly greater than that estimated just on the basis of IPCC (2006. When the extra N2O emission from biofuel production is calculated in "CO2-equivalent" global warming terms, and compared with the quasi-cooling effect of "saving" emissions of fossil fuel derived CO2, the outcome is that the production of commonly used biofuels, such as biodiesel from rapeseed and bioethanol from corn (maize, can contribute as much or more to global warming by N2O emissions than cooling by fossil fuel savings. Crops with less N demand, such as grasses and woody coppice species have more favourable climate impacts. This analysis only considers the conversion of biomass to biofuel. It does not take into account the use of fossil fuel on the farms and for fertilizer and pesticide production, but it also neglects the production of useful co-products. Both factors partially compensate each other. This needs to be analyzed in a full life cycle assessment.

  12. A Changing Number of Alternative States in the Boreal Biome: Reproducibility Risks of Replacing Remote Sensing Products.

    Science.gov (United States)

    Xu, Chi; Holmgren, Milena; Van Nes, Egbert H; Hirota, Marina; Chapin, F Stuart; Scheffer, Marten

    2015-01-01

    Publicly available remote sensing products have boosted science in many ways. The openness of these data sources suggests high reproducibility. However, as we show here, results may be specific to versions of the data products that can become unavailable as new versions are posted. We focus on remotely-sensed tree cover. Recent studies have used this public resource to detect multi-modality in tree cover in the tropical and boreal biomes. Such patterns suggest alternative stable states separated by critical tipping points. This has important implications for the potential response of these ecosystems to global climate change. For the boreal region, four distinct ecosystem states (i.e., treeless, sparse and dense woodland, and boreal forest) were previously identified by using the Collection 3 data of MODIS Vegetation Continuous Fields (VCF). Since then, the MODIS VCF product has been updated to Collection 5; and a Landsat VCF product of global tree cover at a fine spatial resolution of 30 meters has been developed. Here we compare these different remote-sensing products of tree cover to show that identification of alternative stable states in the boreal biome partly depends on the data source used. The updated MODIS data and the newer Landsat data consistently demonstrate three distinct modes around similar tree-cover values. Our analysis suggests that the boreal region has three modes: one sparsely vegetated state (treeless), one distinct 'savanna-like' state and one forest state, which could be alternative stable states. Our analysis illustrates that qualitative outcomes of studies may change fundamentally as new versions of remote sensing products are used. Scientific reproducibility thus requires that old versions remain publicly available.

  13. A Changing Number of Alternative States in the Boreal Biome: Reproducibility Risks of Replacing Remote Sensing Products.

    Directory of Open Access Journals (Sweden)

    Chi Xu

    Full Text Available Publicly available remote sensing products have boosted science in many ways. The openness of these data sources suggests high reproducibility. However, as we show here, results may be specific to versions of the data products that can become unavailable as new versions are posted. We focus on remotely-sensed tree cover. Recent studies have used this public resource to detect multi-modality in tree cover in the tropical and boreal biomes. Such patterns suggest alternative stable states separated by critical tipping points. This has important implications for the potential response of these ecosystems to global climate change. For the boreal region, four distinct ecosystem states (i.e., treeless, sparse and dense woodland, and boreal forest were previously identified by using the Collection 3 data of MODIS Vegetation Continuous Fields (VCF. Since then, the MODIS VCF product has been updated to Collection 5; and a Landsat VCF product of global tree cover at a fine spatial resolution of 30 meters has been developed. Here we compare these different remote-sensing products of tree cover to show that identification of alternative stable states in the boreal biome partly depends on the data source used. The updated MODIS data and the newer Landsat data consistently demonstrate three distinct modes around similar tree-cover values. Our analysis suggests that the boreal region has three modes: one sparsely vegetated state (treeless, one distinct 'savanna-like' state and one forest state, which could be alternative stable states. Our analysis illustrates that qualitative outcomes of studies may change fundamentally as new versions of remote sensing products are used. Scientific reproducibility thus requires that old versions remain publicly available.

  14. N2O release from agro-biofuel production negates global warming reduction by replacing fossil fuels

    Directory of Open Access Journals (Sweden)

    A. R. Mosier

    2008-01-01

    Full Text Available The relationship, on a global basis, between the amount of N fixed by chemical, biological or atmospheric processes entering the terrestrial biosphere, and the total emission of nitrous oxide (N2O, has been re-examined, using known global atmospheric removal rates and concentration growth of N2O as a proxy for overall emissions. For both the pre-industrial period and in recent times, after taking into account the large-scale changes in synthetic N fertiliser production, we find an overall conversion factor of 3–5% from newly fixed N to N2O-N. We assume the same factor to be valid for biofuel production systems. It is covered only in part by the default conversion factor for "direct" emissions from agricultural crop lands (1% estimated by IPCC (2006, and the default factors for the "indirect" emissions (following volatilization/deposition and leaching/runoff of N: 0.35–0.45% cited therein. However, as we show in the paper, when additional emissions included in the IPCC methodology, e.g. those from livestock production, are included, the total may not be inconsistent with that given by our "top-down" method. When the extra N2O emission from biofuel production is calculated in "CO2-equivalent" global warming terms, and compared with the quasi-cooling effect of "saving" emissions of fossil fuel derived CO2, the outcome is that the production of commonly used biofuels, such as biodiesel from rapeseed and bioethanol from corn (maize, depending on N fertilizer uptake efficiency by the plants, can contribute as much or more to global warming by N2O emissions than cooling by fossil fuel savings. Crops with less N demand, such as grasses and woody coppice species, have more favourable climate impacts. This analysis only considers the conversion of biomass to biofuel. It does not take into account the use of fossil fuel on the farms and for fertilizer and pesticide production, but it also neglects the production of useful co-products. Both factors

  15. N2O release from agro-biofuel production negates global warming reduction by replacing fossil fuels

    Science.gov (United States)

    Crutzen, P. J.; Mosier, A. R.; Smith, K. A.; Winiwarter, W.

    2008-01-01

    The relationship, on a global basis, between the amount of N fixed by chemical, biological or atmospheric processes entering the terrestrial biosphere, and the total emission of nitrous oxide (N2O), has been re-examined, using known global atmospheric removal rates and concentration growth of N2O as a proxy for overall emissions. For both the pre-industrial period and in recent times, after taking into account the large-scale changes in synthetic N fertiliser production, we find an overall conversion factor of 3-5% from newly fixed N to N2O-N. We assume the same factor to be valid for biofuel production systems. It is covered only in part by the default conversion factor for "direct" emissions from agricultural crop lands (1%) estimated by IPCC (2006), and the default factors for the "indirect" emissions (following volatilization/deposition and leaching/runoff of N: 0.35-0.45%) cited therein. However, as we show in the paper, when additional emissions included in the IPCC methodology, e.g. those from livestock production, are included, the total may not be inconsistent with that given by our "top-down" method. When the extra N2O emission from biofuel production is calculated in "CO2-equivalent" global warming terms, and compared with the quasi-cooling effect of "saving" emissions of fossil fuel derived CO2, the outcome is that the production of commonly used biofuels, such as biodiesel from rapeseed and bioethanol from corn (maize), depending on N fertilizer uptake efficiency by the plants, can contribute as much or more to global warming by N2O emissions than cooling by fossil fuel savings. Crops with less N demand, such as grasses and woody coppice species, have more favourable climate impacts. This analysis only considers the conversion of biomass to biofuel. It does not take into account the use of fossil fuel on the farms and for fertilizer and pesticide production, but it also neglects the production of useful co-products. Both factors partially compensate

  16. Dental-derived Stem Cells and whole Tooth Regeneration: an Overview

    OpenAIRE

    2009-01-01

    The need for new dental tissue-replacement therapies is evident in recent reports which reveal startling statistics regarding the high incidence of tooth decay and tooth loss. Recent advances in the identification and characterization of dental stem cells, and in dental tissue-engineering strategies, suggest that bioengineering approaches may successfully be used to regenerate dental tissues and whole teeth. Interest in dental tissue-regeneration applications continues to increase as clinical...

  17. Replacement of meat by meat substitutes. A survey on person- and product-related factors in consumer acceptance

    NARCIS (Netherlands)

    Hoek, A.C.; Luning, P.A.; Weijzen, P.; Engels, W.; Kok, F.J.; Graaf, de C.

    2011-01-01

    What does it take to increase the consumption of meat substitutes and attract new consumers? We identified main barriers and drivers by a consumer survey (n = 553) in the U.K. and the Netherlands. Person-related factors (food neophobia and food choice motives) and product-related attitudes and

  18. 75 FR 53976 - Risks and Benefits of Long-Term Use of Nicotine Replacement Therapy Products; Public Workshop...

    Science.gov (United States)

    2010-09-02

    .... Location: The workshop will be held at the Radisson Hotel, Reagan National Airport, 2020 Jefferson Davis... experienced when quitting smoking. Prescription NRT products are marketed under the brand name Nicotrol and... nicotine patches, various brand names and generics), chewing gum (Nicorette and generics) and...

  19. Replacement of meat by meat substitutes. A survey on person- and product-related factors in consumer acceptance

    NARCIS (Netherlands)

    Hoek, A.C.; Luning, P.A.; Weijzen, P.; Engels, W.; Kok, F.J.; Graaf, de C.

    2011-01-01

    What does it take to increase the consumption of meat substitutes and attract new consumers? We identified main barriers and drivers by a consumer survey (n = 553) in the U.K. and the Netherlands. Person-related factors (food neophobia and food choice motives) and product-related attitudes and belie

  20. Natural Tooth Pontic: An Instant Esthetic Option for Periodontally Compromised Teeth—A Case Series

    Science.gov (United States)

    Raj, Rishi; Narayan, Ipshita; Gowda, Triveni Mavinakote; Mehta, D. S.

    2016-01-01

    Sudden tooth loss in the esthetic zone of the maxillary or mandibular anterior region can be due to trauma, periodontal disease, or endodontic failure. The treatment options for replacing the missing tooth can vary between removable prosthesis, tooth-supported prosthesis, and implant-supported prosthesis. Irrespective of the final treatment, the first line of management would be to provisionally restore the patient's esthetic appearance at the earliest, while functionally stabilizing the compromised arch. Using the patient's own natural tooth as a pontic offers the benefits of being the right size, shape, and color and provides exact repositioning in its original intraoral three-dimensional position. Additionally, using the patient's platelet concentrate (platelet rich fibrin) facilitates early wound healing and preservation of alveolar ridge shape following tooth extraction. The abutment teeth can also be preserved with minimal or no preparation, thus keeping the technique reversible, and can be completed at the chair side thereby avoiding laboratory costs. This helps the patient better tolerate the effect of tooth loss psychologically. The article describes a successful, immediate, and viable technique for rehabilitation of three different patients requiring replacement of a single periodontally compromised tooth in an esthetic region. PMID:27994892

  1. Tooth development in a scincid lizard, Chalcides viridanus (Squamata), with particular attention to enamel formation.

    Science.gov (United States)

    Delgado, Sidney; Davit-Béal, Tiphaine; Allizard, Françoise; Sire, Jean-Yves

    2005-01-01

    Comparative analysis of tooth development in the main vertebrate lineages is needed to determine the various evolutionary routes leading to current dentition in living vertebrates. We have used light, scanning and transmission electron microscopy to study tooth morphology and the main stages of tooth development in the scincid lizard, Chalcides viridanus, viz., from late embryos to 6-year-old specimens of a laboratory-bred colony, and from early initiation stages to complete differentiation and attachment, including resorption and enamel formation. In C. viridanus, all teeth of a jaw have a similar morphology but tooth shape, size and orientation change during ontogeny, with a constant number of tooth positions. Tooth morphology changes from a simple smooth cone in the late embryo to the typical adult aspect of two cusps and several ridges via successive tooth replacement at every position. First-generation teeth are initiated by interaction between the oral epithelium and subjacent mesenchyme. The dental lamina of these teeth directly branches from the basal layer of the oral epithelium. On replacement-tooth initiation, the dental lamina spreads from the enamel organ of the previous tooth. The epithelial cell population, at the dental lamina extremity and near the bone support surface, proliferates and differentiates into the enamel organ, the inner (IDE) and outer dental epithelium being separated by stellate reticulum. IDE differentiates into ameloblasts, which produce enamel matrix components. In the region facing differentiating IDE, mesenchymal cells differentiate into dental papilla and give rise to odontoblasts, which first deposit a layer of predentin matrix. The first elements of the enamel matrix are then synthesised by ameloblasts. Matrix mineralisation starts in the upper region of the tooth (dentin then enamel). Enamel maturation begins once the enamel matrix layer is complete. Concomitantly, dental matrices are deposited towards the base of the

  2. [Estrogen replacement].

    Science.gov (United States)

    Søgaard, A J; Berntsen, G K; Magnus, J H; Tollan, A

    1998-02-10

    Recent research on long-term postmenopausal hormone replacement therapy (HRT) indicates a positive effect on both total mortality and morbidity. This has raised the question of widespread preventive long-term use of HRT. Possible side-effects and ideological issues related to preventive HRT have led to debate and uncertainty among health professionals, in the media, and in the population at large. In order to evaluate the level of knowledge about and attitudes towards HRT, a randomly selected group of 737 Norwegian women aged 16-79 was interviewed by the Central Bureau of Statistics. One in three women had received information about HRT in the last two years, mainly through weekly magazines and physicians. The proportion who answered the questions on knowledge correctly varied from 36% to 47%. Those who had been given information by a physician possessed accurate knowledge, had more positive attitudes towards HRT and were more willing to use HRT than women who had reviewed information through other channels. Women with a higher level of education were better informed and more knowledgeable than others, but were nevertheless more reluctant to use HRT than those who were less educated. The limited number of women who actually receive information on HRT, the low level of knowledge and the ambivalent attitudes toward HRT are a major challenge to the public health service.

  3. Comparative in vitro toxicity profile of electronic and tobacco cigarettes, smokeless tobacco and nicotine replacement therapy products: e-liquids, extracts and collected aerosols.

    Science.gov (United States)

    Misra, Manoj; Leverette, Robert D; Cooper, Bethany T; Bennett, Melanee B; Brown, Steven E

    2014-10-30

    The use of electronic cigarettes (e-cigs) continues to increase worldwide in parallel with accumulating information on their potential toxicity and safety. In this study, an in vitro battery of established assays was used to examine the cytotoxicity, mutagenicity, genotoxicity and inflammatory responses of certain commercial e-cigs and compared to tobacco burning cigarettes, smokeless tobacco (SLT) products and a nicotine replacement therapy (NRT) product. The toxicity evaluation was performed on e-liquids and pad-collected aerosols of e-cigs, pad-collected smoke condensates of tobacco cigarettes and extracts of SLT and NRT products. In all assays, exposures with e-cig liquids and collected aerosols, at the doses tested, showed no significant activity when compared to tobacco burning cigarettes. Results for the e-cigs, with and without nicotine in two evaluated flavor variants, were very similar in all assays, indicating that the presence of nicotine and flavors, at the levels tested, did not induce any cytotoxic, genotoxic or inflammatory effects. The present findings indicate that neither the e-cig liquids and collected aerosols, nor the extracts of the SLT and NRT products produce any meaningful toxic effects in four widely-applied in vitro test systems, in which the conventional cigarette smoke preparations, at comparable exposures, are markedly cytotoxic and genotoxic.

  4. Comparative In Vitro Toxicity Profile of Electronic and Tobacco Cigarettes, Smokeless Tobacco and Nicotine Replacement Therapy Products: E-Liquids, Extracts and Collected Aerosols

    Directory of Open Access Journals (Sweden)

    Manoj Misra

    2014-10-01

    Full Text Available The use of electronic cigarettes (e-cigs continues to increase worldwide in parallel with accumulating information on their potential toxicity and safety. In this study, an in vitro battery of established assays was used to examine the cytotoxicity, mutagenicity, genotoxicity and inflammatory responses of certain commercial e-cigs and compared to tobacco burning cigarettes, smokeless tobacco (SLT products and a nicotine replacement therapy (NRT product. The toxicity evaluation was performed on e-liquids and pad-collected aerosols of e-cigs, pad-collected smoke condensates of tobacco cigarettes and extracts of SLT and NRT products. In all assays, exposures with e-cig liquids and collected aerosols, at the doses tested, showed no significant activity when compared to tobacco burning cigarettes. Results for the e-cigs, with and without nicotine in two evaluated flavor variants, were very similar in all assays, indicating that the presence of nicotine and flavors, at the levels tested, did not induce any cytotoxic, genotoxic or inflammatory effects. The present findings indicate that neither the e-cig liquids and collected aerosols, nor the extracts of the SLT and NRT products produce any meaningful toxic effects in four widely-applied in vitro test systems, in which the conventional cigarette smoke preparations, at comparable exposures, are markedly cytotoxic and genotoxic.

  5. Expression of HMGB1 during tooth development.

    Science.gov (United States)

    Sugars, R; Karlström, E; Christersson, C; Olsson, M-L; Wendel, M; Fried, K

    2007-03-01

    High mobility group box 1 (HMGB1) is a nuclear and cytosolic protein that can act as a transcription factor, a growth factor, or a cytokine. To elucidate a possible role for HMGB1 in tooth development, we have studied the expression of HMGB1 and its receptor RAGE (receptor for advanced glycation end-products) during the late fetal and early postnatal period of rat by using light- and electron-microscopic immunohistochemistry. Low HMGB1 protein expression was observed during fetal and newborn stages of tooth development. However, from postnatal day 5 (P5) onward, a marked increase occurred in the levels of the protein in most dental cell types. Expression was particularly high in ameloblasts and odontoblasts at regions of ongoing mineralization. Although most HMGB1 immunoreactivity was confined to cell nuclei, it was also present in odontoblast cytoplasm. At P5, ameloblasts and odontoblasts also showed RAGE immunoreactivity, and reverse transcription-polymerase chain reaction demonstrated both HMGB1 and RAGE mRNA in human dental pulp cells in vitro. Immunoblots performed on extracts from bovine dentin demonstrated a principal band at approximately 27 kDa, indicating that HMGB1 participates in tooth mineralization. The expression of both ligand and receptor suggests an autocrine/paracrine HMGB1 signalling axis in odontoblasts.

  6. Effect of replacement of fish meal by meat and bone meal and poultry by-product meal in diets on the growth and immune response of Macrobrachium nipponense.

    Science.gov (United States)

    Yang, Yong; Xie, Shouqi; Lei, Wu; Zhu, Xiaoming; Yang, Yunxia

    2004-08-01

    The potential use of poultry by-product meal (PBM) and meat and bone meal (MBM) as alternative dietary protein sources for juvenile Macrobrachium nipponense was studied by a 70-day growth trial. Triplicate groups of M. nipponense (initial body weight: 0.37 g) were fed at 20.7-22.4 degrees C on each of the five isoenergetic and isonitrogenous diets (protein content about 38%) with different replacement of fish meal by MBM or PBM. The control diet used white fish meal as the sole protein source, the other four diets were prepared with 15% or 50% fish meal protein substituted by either MBM (MBM(15), MBM(50)) or PBM (PBM(15), PBM(50)). The results showed that replacement of fish meal by MBM in diets did not affect growth performance of M. nipponense (P > 0.05), while specific growth rate in PBM(15) was significantly higher than that in other groups (P meal protein in diets for M. nipponense.

  7. Managing congenitally missing lateral incisors. Part II: tooth-supported restorations.

    Science.gov (United States)

    Kinzer, Greggory A; Kokich, Vincent O

    2005-01-01

    Three treatment options exist for the replacement of congenitally missing lateral incisors: canine substitution, a tooth-supported restoration, or a single-tooth implant. Selecting the appropriate treatment option depends on the malocclusion, the anterior relationship, specific space requirements, and the condition of the adjacent teeth. The ideal treatment is the most conservative alternative that satisfies individual esthetic and functional requirements. This article closely examines the three options when replacing a missing lateral incisor with a tooth-supported restoration. These options are a resin-bonded fixed partial denture, a cantilevered fixed partial denture, and a conventional full-coverage fixed partial denture. The specific criteria that must be evaluated for each option is addressed to illustrate the importance of interdisciplinary treatment planning to achieve optimal esthetics and long-term predictability. This article is the second of a three-part series discussing the three treatment alternatives for replacing congenitally missing lateral incisors.

  8. [Application of micro-power system in the surgery of tooth extraction].

    Science.gov (United States)

    Kaijin, Hu; Yongfeng, Li

    2015-02-01

    Tooth extraction is a common operation in oral surgery. Traditional-extraction instruments, such as bone chisel, elevator, and bone hammer, lead to not only severe trauma but also unnecessary complications, and patients easily become nervous and apprehensive if tooth extraction is performed using these violent instruments. In recent years, with the develop- ment of minimally invasive concept and technology, various micro-power instruments have been used for tooth extraction. This innovative technology can reduce the iatrogenic trauma and complications of tooth extraction. Additionally, this technology can greatly decrease the patient's physical and mental pressure. The new equipment compensates for the deficiency of traditional tooth extraction equipment and facilitates the gradual replacement of the latter. Diverse micro-power systems have distinct strengths and weaknesses, so some auxiliary instruments are still needed during tooth extraction. This paper focuses on the various micro-power systems for tooth extraction and tries to compare the advantages and disadvantages of these systems. Selection and usage of auxiliary equipment are also introduced. Thus, this paper provides reference for the proper application of the micro-power systems in tooth extraction.

  9. Treatment of a horizontal root-fractured tooth with decoronation procedure: case report

    Directory of Open Access Journals (Sweden)

    Selen Esin Yoldaş

    2016-05-01

    Full Text Available INTRODUCTION: Early loss of permanent anterior teeth due to trauma can cause esthetic and functional problems for young patients. In such cases, replacement of the missing tooth with traditional approaches is possible; however such approaches will reduce the chance of the patient to receive an esthetic and consistent treatment in the future. CASE REPORT: A 12-year-old male patient referred to our clinic with a history of trauma. Complicated crown fracture in tooth no.11 and horizontal root fracture in tooth no. 21 was detected. Following root canal treatment, tooth no. 11 was restored with a fiber post and a strip crown. To avoid alveolar bone loss due to early tooth extraction, decoronation procedure, an alternative approach, was applied to tooth no. 21. This procedure consisted of leaving the root fragment inside the alveolar socket following the removal of the crown. For the rehabilitation of the missing crown, a partial removable prosthesis was implemented. The patient was recalled in 6., 12. and 18. months. Within the follow-up period, no reduction in the alveolar bone level was seen. No sign of infection was evident. The remaining root fragment kept on resorbing. Tooth no. 11 remained symptom-free as well. The patient is still being followed. CONCLUSION: Decoronation is essentially a treatment choice for preventing alveolar bone loss in ankylosed teeth considered for extraction. In this case report, decoronation was shown to be a suitable alternative also for a fractured, non-ankylosed tooth.

  10. Biomaterial Selection for Tooth Regeneration

    OpenAIRE

    2011-01-01

    Biomaterials are native or synthetic polymers that act as carriers for drug delivery or scaffolds for tissue regeneration. When implanted in vivo, biomaterials should be nontoxic and exert intended functions. For tooth regeneration, biomaterials have primarily served as a scaffold for (1) transplanted stem cells and/or (2) recruitment of endogenous stem cells. This article critically synthesizes our knowledge of biomaterial use in tooth regeneration, including the selection of native and/or s...

  11. Dental patterning in the earliest sharks: Implications for tooth evolution.

    Science.gov (United States)

    Maisey, John G; Turner, Susan; Naylor, Gavin J P; Miller, Randall F

    2014-05-01

    Doliodus problematicus is the oldest known fossil shark-like fish with an almost intact dentition (Emsian, Lower Devonian, c. 397Ma). We provide a detailed description of the teeth and dentition in D. problematicus, based on tomographic analysis of NBMG 10127 (New Brunswick Museum, Canada). Comparisons with modern shark dentitions suggest that Doliodus was a ram-feeding predator with a dentition adapted to seizing and disabling prey. Doliodus provides several clues about the early evolution of the "shark-like" dentition in chondrichthyans and also raises new questions about the evolution of oral teeth in jawed vertebrates. As in modern sharks, teeth in Doliodus were replaced in a linguo-labial sequence within tooth families at fixed positions along the jaws (12-14 tooth families per jaw quadrant in NBMG 10127). Doliodus teeth were replaced much more slowly than in modern sharks. Nevertheless, its tooth formation was apparently as highly organized as in modern elasmobranchs, in which future tooth positions are indicated by synchronized expression of shh at fixed loci within the dental epithelium. Comparable dental arrays are absent in osteichthyans, placoderms, and many "acanthodians"; a "shark-like" dentition, therefore, may be a synapomorphy of chondrichthyans and gnathostomes such as Ptomacanthus. The upper anterior teeth in Doliodus were not attached to the palatoquadrates, but were instead supported by the ethmoid region of the prechordal basicranium, as in some other Paleozoic taxa (e.g., Triodus, Ptomacanthus). This suggests that the chondrichthyan dental lamina was originally associated with prechordal basicranial cartilage as well as jaw cartilage, and that the modern elasmobranch condition (in which the oral dentition is confined to the jaws) is phylogenetically advanced. Thus, oral tooth development in modern elasmobranchs does not provide a complete developmental model for chondrichthyans or gnathostomes.

  12. Pulpal regeneration following allogenic tooth transplantation into mouse maxilla.

    Science.gov (United States)

    Unno, Hideki; Suzuki, Hironobu; Nakakura-Ohshima, Kuniko; Jung, Han-Sung; Ohshima, Hayato

    2009-04-01

    Autogenic tooth transplantation is now a common procedure in dentistry for replacing a missing tooth. However, there are many difficulties in clinical application of allogenic tooth transplantation because of immunological rejection. This study aims to clarify pulpal regeneration following allogenic tooth transplantation into the mouse maxilla by immunohistochemistry for 5-bromo-2'-deoxyuridine (BrdU) and nestin, and by the histochemistry for tartrate-resistant acid phosphatase (TRAP). The upper right first molar (M1) of 2-week-old mice was extracted and allografted in the original socket in both the littermate and non-littermate after the extraction of M1. Tooth transplantation weakened the nestin-positive reactions in the pulp tissue that had shown immunoreactivity for nestin before operation. On postoperative Days 5-7, tertiary dentin formation commenced next to the preexisting dentin where nestin-positive odontoblast-like cells were arranged in all cases of the littermate group until Day 14, except for one case showing immunological rejection in the pulp chamber. In the non-littermate group, bone-like tissue formation occurred in the pulp chamber in addition to tertiary dentin formation until Day 14. The rate of tertiary dentin was 38%, and the rate of the mixed form of dentin and bone-like tissue formation was 23% (the remainder was immunological rejection). Interestingly, the periodontal tissue recovered even in the case of immunological rejection in which the pulp chamber was replaced by sparse connective tissue. These results suggest that the selection of littermate or non-littermate is decisive for the survival of odontoblast-lineage cells and that the immunological rejection does not influence the periodontal regeneration.

  13. Replacing alfalfa or red clover silage with birdsfoot trefoil silage in total mixed rations increases production of lactating dairy cows.

    Science.gov (United States)

    Hymes-Fecht, U C; Broderick, G A; Muck, R E; Grabber, J H

    2013-01-01

    The objective of this study was to compare milk production and nutrient utilization in dairy cattle fed silage made from alfalfa (AL) or red clover (RC) versus birdsfoot trefoil (BFT) selected for low, normal, and high levels of condensed tannins. Condensed tannin contents of the 3 BFT silages were 8, 12, and 16 g/kg of DM by butanol-HCl assay. Twenty-five multiparous Holstein cows (5 fitted with ruminal cannulas) were blocked by days in milk and randomly assigned within blocks to incomplete 5×5 Latin squares. Diets contained [dry matter (DM) basis] about 60% AL, 50% RC, or 60% of 1 of the 3 BFT; the balance of dietary DM was largely from high-moisture corn plus supplemental crude protein from soybean meal. Diets were balanced to approximately 17% crude protein and fed for four 3-wk periods; 2 wk were allowed for adaptation and production data were collected during the last week of each period. No differences existed in DM intake or milk composition due to silage source, except that milk protein content was lowest for RC. Yields of milk, energy-corrected milk, fat, protein, lactose, and solids-not-fat were greater for the 3 BFT diets than for diets containing AL or RC. Feeding BFT with the highest condensed tannin content increased yield of milk, protein, and solids-not-fat compared with BFT containing the lowest amount of condensed tannin. Moreover, milk-N/N-intake was higher, and milk urea nitrogen concentration and urinary urea-N excretion were lower for diets with normal levels of BFT than for AL or RC diets. Feeding RC resulted in the highest apparent digestibility of DM, organic matter, neutral detergent fiber, acid detergent fiber, and hemicellulose and lowest ruminal concentrations of ammonia and free amino acids. Ruminal branched-chain volatile fatty acid levels were lowest for RC diets and diets with high levels of BFT and highest for the AL diet. Overall, diets containing BFT silage supported greater production than diets containing silage from AL or RC

  14. [A tooth or an implant--literature based decision making].

    Science.gov (United States)

    Bar On, H; Sharon, E; Lipovezky-Adler, M; Haramaty, O; Smidt, A

    2014-07-01

    The common use of dental implants in the daily practice led to a profound change in the available treatment strategies. The option of replacing a diagnosed doubtful tooth with an implant has become widely accepted and often used. The prognosis systems in use today are based on the three major disciplines: endodontics, periodontics and prosthodontics. Combining these three may impair and bias the decision making process and increase the tendency to base it on subjective clinical experience and personal preference. Reading and reviewing the relevant literature gives no clear tool for use. Root canal treatment is considered a highly predictable treatment procedure and a treated tooth is affected mainly by the quality and type of the fabricated restoration and the risk of caries. Periodontal treatment followed by a suitable maintenance regimen will likely allow long term tooth survival. When comparing the success rates of natural teeth rehabilitation versus implant supported restorations, it appears that with implants an additional treatment is demanded along the years. This coincides with the fact that to date there is no consensus regarding the extent of perimplantitis and perimucositis that is to be expected around a restored implant. In addition, a peri implant tissue problem or a failure of a dental implant may prove to be more challenging than a failure of a tooth. It is important to remember that a dental implant is made to substitute a missing tooth and it is a treatment modality with known and clear indications for rehabilitation of an edentulous space. The aim of this paper is to review and discuss the various aspects of whether to maintain a compromised or a doubtful tooth or to prefer a treatment modality using dental implants. In conclusion it is advised here, to incorporate the discussed issues in the decision making process towards the most suitable treatment plan.

  15. Effects of Replacing Fishmeal with Animal By-products Meal Supplementation in Diets on the Growth and Nutrient Utilization of Mangrove Red Snapper

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    A feeding trial was conducted for 75 d to evaluate the nutritive value of a mixture of animal by-products (MAB) as a possible protein source in diets for juvenile mangrove red snapper, Lutjanus argentimaculatus (mean initial body weight, 30 g). Fish were fed one of five isonitrogenous diets (40% crude protein) replacing 0, 25% (MAB25), 50% (MAB50), 75% (MAB75) and 100% (MAB100) of fish meal protein with similar percentages of MAB. The MAB consisted of 25% cow liver meal, 20% leather meal, 20% meat and bone meal, 15% blood meal, 10% APC (poultry feather meal), 8% poultry manure dried, 1.5% choline and 0.5% chromic oxide. After 75 d of feeding, fish fed with diets MAB50, MAB75 and MAB100 exhibited significantly lower growth performance than that of fish fed with control and MAB25 diets. The optimum level of MAB was estimated to be 23%. Replacement of fish meal by MAB23% showed the following performance: maximum weight gain, 510%; SGR, 2.39% and FCE, 2.83%. The MAB substitution up to 75% of fish meal protein in diets did not show differences in apparent protein digestibility (83.6% for MAB25, 79.2% for MAB50, 78.7% for MAB75) compared with control (83.4%), whereas in MAB100 group digestibility (65.3%) was significantly lower than in other groups. The apparent phosphorus absorption of test diet groups was significantly higher (37.1% for MAB25, 28.5% for MAB50, 55.6% for MAB75 and 54.5% for MAB100) than that of control (11.2%). The levels of protein and ash in the whole body, carcass and viscera increased as MAB substitution in diets increased, whereas lipids and moisture remained consistent among all treatment groups. These results showed that approximately 23% of fish meal protein could be replaced by a mixture of animal by-products for juvenile snapper growing from 30 g to 167 g in 75 d without compromising growth performance and feed efficiency.

  16. Effects of replacing fishmeal with animal by-products meal supplementation in diets on the growth and nutrient utilization of mangrove red snapper

    Science.gov (United States)

    Jamil, Khalid; Abbas, Ghulam; Akhtar, Rukhsana; Lin, Hong; Li, Zhenxing

    2007-07-01

    A feeding trial was conducted for 75 d to evaluate the nutritive value of a mixture of animal by-products (MAB) as a possible protein source in diets for juvenile mangrove red snapper, Lutjanus argentimaculatus (mean initial body weight, 30 g). Fish were fed one of five isonitrogenous diets (40% crude protein) replacing 0, 25% (MAB25), 50% (MAB50), 75% (MAB75) and 100% (MAB100) of fish meal protein with similar percentages of MAB. The MAB consisted of 25% cow liver meal, 20% leather meal, 20% meat and bone meal, 15% blood meal, 10% APC (poultry feather meal), 8% poultry manure dried, 1.5% choline and 0.5% chromic oxide. After 75 d of feeding, fish fed with diets MAB50, MAB75 and MAB100 exhibited significantly lower growth performance than that of fish fed with control and MAB25 diets. The optimum level of MAB was estimated to be 23%. Replacement of fish meal by MAB23% showed the following performance: maximum weight gain, 510%; SGR, 2.39% and FCE, 2.83%. The MAB substitution up to 75% of fish meal protein in diets did not show differences in apparent protein digestibility (83.6% for MAB25, 79.2% for MAB50, 78.7% for MAB75) compared with control (83.4%), whereas in MAB100 group digestibility (65.3%) was significantly lower than in other groups. The apparent phosphorus absorption of test diet groups was significantly higher (37.1% for MAB25, 28.5% for MAB50, 55.6% for MAB75 and 54.5% for MAB100) than that of control (11.2%). The levels of protein and ash in the whole body, carcass and viscera increased as MAB substitution in diets increased, whereas lipids and moisture remained consistent among all treatment groups. These results showed that approximately 23% of fish meal protein could be replaced by a mixture of animal by-products for juvenile snapper growing from 30 g to 167 g in 75 d without compromising growth performance and feed efficiency.

  17. 脂肪替代品在低脂肉制品中的研究进展%Research progress in fat replacement of low fat meat production

    Institute of Scientific and Technical Information of China (English)

    王强; 周雅琳; 赵欣; 邹妍; 陶兵兵; 赵国华

    2013-01-01

    Due to decreased fat intake and prevented slow disease,low-fat meat production became hot topics which attracted by increasing researchers in recent years.In this article,on the basis of studies of low fat meat production,the lasted progress in constituents,texture characteristic,antioxidatant stability and sensory quality of low fat sausage added three type fat replacements was reviewed.Meanwhile,referential formations and its future prospect in the low fat meat production were provided in this work.%由于低脂肉制品可有效降低脂肪的摄入,且能预防高脂膳食所引起的各种慢性疾病,相关研究领域逐渐成为近年来的研究热点.本文基于国内外低脂肉制品的发展现状,从脂肪替代物、脂肪模拟物和复合型脂肪替代物三个方面综述了各自对低脂肉制品组成成分、组织结构、抗氧化性及感官评价等指标影响的最新研究进展,并就肉制品中脂肪替代物的发展方向进行了展望.

  18. Transplantation of premolars as an approach for replacing avulsed teeth.

    Science.gov (United States)

    Andreasen, Jens Ove; Schwartz, Ole; Kofoed, Thomas; Daugaard-Jensen, Jette

    2009-01-01

    Autotransplantation of premolars to the anterior region subsequent to tooth loss represent a unique treatment method that has a number of advantages in comparison with other tooth substitution methods. A tooth transplant has a bone inducing capacity implying that lost labial bone is regenerated. Secondly the tooth precipitates growth of the alveolar procces and allows treatment to be performed at an early age (10-12 years) where the trauma incidence is at its maximum. Finally transplanted teeth can be moved orthodontically. These characteristics make implant solutions appealing in a number of situations. The procedure consist in selecting a premolar in a optimal root development stage which is approximately three fourths root formation where optimal pulp and periodontal ligament healing can be achieved in more than 90 percent of the cases. The tooth is later after slight crown remodeling restored with composite or a porcelain laminate. Four recent long-term studies have shown survival rates between 90-98 percent and a single long term study (33 years) showed a survival rate of 90 percent, a survival rate not surpassed by any other type of tooth replacement (fixed or removable prostetics, implants). In conclusion premolar transplantation should be considered in cases of early loss of a permanent tooth.

  19. Analysis of split tooth as an unstudied reason for tooth extraction

    OpenAIRE

    Osaghae, Ifueko Patience; Azodo, Clement Chinedu

    2014-01-01

    Background Split tooth is an unstudied reason for tooth extraction. The purpose of this study was to determine and analyze split tooth as a reason for extraction in a dental clinic in Benin City. Methods The prospective study was carried out on 669 patients having tooth extraction between May, 2005 and December, 2012. Over the period of the study, diagnosis and tooth extraction were done by three dentists of more five years practice experience. The indications for tooth extraction were noted ...

  20. Sensory properties of meal replacement bars and beverages made from whey and soy proteins.

    Science.gov (United States)

    Childs, J L; Yates, M D; Drake, M A

    2007-08-01

    Whey and soy proteins have a variety of applications. Previous work has documented flavors of rehydrated whey and soy proteins. It is necessary to understand what flavors whey and soy proteins contribute to product applications to optimize protein performance in desired applications. This research was conducted to characterize sensory properties of meal replacement products containing whey and soy proteins. Flavor and texture lexicons were developed for meal replacement bars and beverages. Commercial peanut butter-flavored meal replacement bars and vanilla meal replacement shakes were evaluated by an experienced, trained descriptive panel (n= 9). Prototypes of bars and beverages were developed with 3 levels of whey and soy protein and subsequently evaluated. Consumer acceptance testing (n= 85) was conducted on the prototype bars and beverages. Protein type as well as product-specific formulation contributed differences in flavor and texture of commercial bars and beverages (P whey protein were characterized by sweet aromatic and vanillin flavor notes while the texture was characterized by adhesiveness and cohesiveness. Prototype bars made with soy protein were characterized by nutty flavor while the texture was characterized by tooth-pack and denseness. Whey protein contributed to sweet aromatic and vanillin flavors in prototype beverages while soy protein contributed cereal/grainy flavors. Consumer acceptance scores were higher for prototype bars and beverages containing whey protein or a mixture of whey/soy protein than for products made with soy protein alone (P < 0.05). These results will aid researchers and product developers in optimizing sensory quality in meal replacement products.

  1. Is a three-dimensional-printed tooth filling possible?

    Directory of Open Access Journals (Sweden)

    Muhammet Kerim Ayar

    2016-01-01

    Full Text Available Introduction: Three-dimensional (3-D printing is seen as an innovative production process in many fields of dentistry and medicine. But implantation of this novel production process into the treatment of decayed teeth in dentistry remains lacking. Destruction of dental tissues as a result of dental caries is generally treated with dental resin composite fillings. However, a 3-D-printed tooth filling approach, which could be an alternative to traditional approaches, has a potential to reduce treatment costs and technique-sensitivity of the placement of restorative material. The Hypothesis: Here, the hypothesis that a 3-D-printed tooth filling approach could be an alternative to traditional approaches to treatment of decayed teeth is proposed. Evaluation of the Hypothesis: The actual implementation of the 3-D-printed tooth filling technique in the practice of restorative dentistry was discussed in this manuscript.

  2. Tooth wear patterns in the deciduous dentition.

    Science.gov (United States)

    Warren, John J; Yonezu, Takuro; Bishara, Samir E

    2002-12-01

    Tooth wear is common in the deciduous dentition. A recent study suggests that tooth wear in the deciduous dentition is related to subsequent tooth wear in adults, so that early identification of factors related to tooth wear could be of long-term benefit. The purposes of this study were to describe patterns of tooth wear in the deciduous dentition and to relate tooth wear to occlusal characteristics and longitudinal dietary patterns. Data were collected as part of a longitudinal study of a cohort of children recruited at birth from Iowa hospitals. Stone casts were obtained in the deciduous dentition stage, and 355 children, 4 to 5 years old, met the selection criteria. Tooth wear was categorized for each tooth as none, mild, moderate, or severe, and related to occlusal characteristics and longitudinal data on fruit juice and soft drink consumption. All children exhibited some tooth wear on at least 1 tooth, and nearly 16% of them had at least 1 tooth with severe wear. Tooth wear was generally more severe in the maxillary arch and the anterior teeth. Severe tooth wear on the molars was significantly related to posterior crossbites, but severe tooth wear on the incisors was related to Class III canine relationships. There were no statistically significant relationships between tooth wear and soft drink or fruit juice consumption. Based on our results, we concluded that mild tooth wear is universal in the deciduous dentition, but only a few occlusal factors are related to severe tooth wear. Tooth wear was not related to any dietary patterns we investigated.

  3. Tooth polishing: The current status.

    Science.gov (United States)

    Sawai, Madhuri Alankar; Bhardwaj, Ashu; Jafri, Zeba; Sultan, Nishat; Daing, Anika

    2015-01-01

    Healthy teeth and gums make a person feel confident and fit. As people go about their daily routines and with different eating and drinking habits, the tooth enamel turns yellowish or gets stained. Polishing traditionally has been associated with the prophylaxis procedure in most dental practices, which patients know and expect. However, with overzealous use of polishing procedure, there is wearing of the superficial tooth structure. This would lead to more accumulation of local deposits. Also, it takes a long time for the formation of the fluoride-rich layer of the tooth again. Hence, now-a-days, polishing is not advised as a part of routine oral prophylaxis procedure but is done selectively based on the patients' need. The article here, gives an insight on the different aspects of the polishing process along with the different methods and agents used for the same.

  4. Tooth polishing: The current status

    Directory of Open Access Journals (Sweden)

    Madhuri Alankar Sawai

    2015-01-01

    Full Text Available Healthy teeth and gums make a person feel confident and fit. As people go about their daily routines and with different eating and drinking habits, the tooth enamel turns yellowish or gets stained. Polishing traditionally has been associated with the prophylaxis procedure in most dental practices, which patients know and expect. However, with overzealous use of polishing procedure, there is wearing of the superficial tooth structure. This would lead to more accumulation of local deposits. Also, it takes a long time for the formation of the fluoride-rich layer of the tooth again. Hence, now-a-days, polishing is not advised as a part of routine oral prophylaxis procedure but is done selectively based on the patients′ need. The article here, gives an insight on the different aspects of the polishing process along with the different methods and agents used for the same.

  5. Dentin hypersensitivity-like tooth pain seen in patients receiving steroid therapy: An exploratory study.

    Science.gov (United States)

    Shoji, Noriaki; Endo, Yu; Iikubo, Masahiro; Ishii, Tomonori; Harigae, Hideo; Aida, Jun; Sakamoto, Maya; Sasano, Takashi

    2016-11-01

    To ascertain whether steroid therapy evokes dentin hypersensitivity (DH)-like tooth pain, we performed a study based on compelling evidence from patients receiving steroid therapy. An exploratory study was conducted using a questionnaire for 220 patients prescribed steroids who attended the Department of Hematology and Rheumatology of Tohoku University Hospital. Group comparisons between patients with and without steroid pulse therapy were analysed by statistical means. In this study, any DH-like tooth pain that commenced subsequent to steroid treatment was defined as steroid-derived (SD) tooth pain. The prevalence of SD tooth pain was 17.7% (39/220 patients). SD tooth pain was triggered in many vital teeth by cold and/or hot water (84.2% and 23.7%, respectively) with the pain characterised as continuous, in contrast to typical DH tooth pain. SD tooth pain was significantly more frequent in pulse therapy patients than in non-pulse therapy patients (p pain score (ρ = 0.642). Dose reduction or discontinuation of steroid therapy relieved SD tooth pain in all cases. Thus, steroid therapy can evoke DH-like tooth pain during treatment. Copyright © 2016 The Authors. Production and hosting by Elsevier B.V. All rights reserved.

  6. Primary culprit for tooth loss!!

    Directory of Open Access Journals (Sweden)

    Sailavanya Nuvvula

    2016-01-01

    Full Text Available Aim: In order to facilitate planning for dental health services and to progress strategies to continue the reduction in tooth loss, it is important to identify the factors that result in such loss. therefore the aim of the study is to investigate the major cause for tooth extraction. Objective: to examine whether the major reason for tooth extraction is dental caries or periodontal disease. Materials and Methods: The study is carried out among the dental practitioners in our district. A questionnaire containing 10 items was distributed to the dental practitioners, which included age, gender, no of teeth indicated for extraction, the reason for extraction, and the periodontal parameters that are involved with the extracted tooth and were requested to complete the form on every extraction they were to undertake. the study form was collected at the end of the study period and data was subjected to statistical analysis. Results: A total of 502 patients were enrolled during the study period, and a total of 1055 teeth were extracted for several reasons. we found that 51.14%extractions are due to dental caries in case of 20-30years age groups, which is more when compared to tooth loss due to periodontal diseases in this age group. whereas in case of >40years of age group periodontal diseases account for 54.11%, and dental caries accounts for only 29.11%. Showing more teeth were lost due to periodontal disease. Conclusion: therefore we concluded that, caries is the dominant reason for extraction in patients with 20–30 years of age while periodontal disease accounts for the majority of tooth extraction in patients older than 40 years.

  7. On gear tooth stiffness evaluation

    DEFF Research Database (Denmark)

    Pedersen, Niels Leergaard; Jørgensen, Martin Felix

    2014-01-01

    The estimation of gear stiffness is important for determining the load distribution between the gear teeth when two sets of teeth are in contact. Two factors have a major influence on the stiffness; firstly the boundary condition through the gear rim size included in the stiffness calculation...... and secondly the size of the contact. In the FE calculation the true gear tooth root profile is applied. The meshing stiffnesses of gears are highly non-linear, it is however found that the stiffness of an individual tooth can be expressed in a linear form assuming that the contact width is constant. © 2014...

  8. A SINGLE VISIT IMMEDIATE TEMPORIZATION WITH NATURAL TOOTH PONTIC FOR PERIODONTALLY INVOLVED ANTERIOR TEETH : ANESTHETIC AND INNOVATIVE APPROACH

    Directory of Open Access Journals (Sweden)

    Nilofer Sultan Sheikh, Neelima S. Rajhans, Preeti Mundhe, Gabriela Jude Fernandez, Nilkanth Mhaske, Nikesh Moolya, Sudeep HM

    2015-01-01

    Full Text Available Aim and Objectives: Sudden loss of anterior tooth is a dreadful situation. It can be as a result of trauma, endodontic failure or periodontal disease which is a true aesthetic emergency for a patient. Along with the patient, the dentist also emphasizes on saving an anterior tooth for the primary reason of aesthetics. If the tooth crown is intact, is not grossly decayed, broken down or discoloured, it can be used as a natural tooth pontic in designing an interim prosthesis. Case: A chair side technique for replacing the missing tooth using the patient’s own natural tooth as a pontic in the three dimensional original position using a fibre reinforced composite resin splint thus restoring the aesthetics and relieving the apprehension of the patient, as described in this case report. Conclusion: The concept of Natural tooth pontic placement is a simple, economical, minimal intervention, viable and an easy to handle treatment option and promises an excellent transient aesthetic solution for a lost tooth as well as require minimal or no tooth preparation, thus is a reversible technique and avoids the laboratory cost.

  9. Orthodontic Tooth Movement: A Historic Prospective.

    Science.gov (United States)

    Will, Leslie A

    2016-01-01

    The earliest report on orthodontic tooth movement in the English literature was published in 1911. Oppenheim carried out studies on baboons to determine what histologic changes occurred during tooth movement. Reitan and many others carried out research into the nature of tooth movement. The pressure-tension model of tooth movement developed from these studies, whereby the two sides of the tooth responded to forces as if in isolation. A second theory, proposed by Stuteville in 1938, was the hydraulic theory of tooth movement. In this theory, fluid from the vasculature, lymphatic system and intercellular spaces responds to the forces of tooth movement, damping the force and limiting movement. Bien and Baumrind expanded on this theory with their own studies in the 1960s. It is clear that both the pressure-tension and fluid flow concepts have merit, but considerable work needs to be done to ascertain the details so that tooth movement can be managed and controlled.

  10. Tooth Retained Implant: No More an Oxymoron

    OpenAIRE

    Divya Bhat

    2011-01-01

    Introduction: Periodontally af-fected teeth are treated in one of the two ways. (1) Tooth retention after periodontal surgery, in which the degree of regeneration achieved is unpredictable. (2) Tooth extrac-tion and implant placement. Implants have an osseointegrated surface which does not provide adequate shock absorption. Regeneration can be achieved by resecting the crown of the affected tooth and submerging the root. This technique has not had a clinical application so far as the tooth be...

  11. Molar tooth carbonates and benthic methane fluxes in Proterozoic oceans

    Science.gov (United States)

    Shen, Bing; Dong, Lin; Xiao, Shuhai; Lang, Xianguo; Huang, Kangjun; Peng, Yongbo; Zhou, Chuanming; Ke, Shan; Liu, Pengju

    2016-01-01

    Molar tooth structures are ptygmatically folded and microspar-filled structures common in early- and mid-Proterozoic (~2,500-750 million years ago, Ma) subtidal successions, but extremely rare in rocks isotopes, we show that molar tooth structures may have formed within sediments where microbial sulphate reduction and methanogenesis converged. The convergence was driven by the abundant production of methyl sulphides (dimethyl sulphide and methanethiol) in euxinic or H2S-rich seawaters that were widespread in Proterozoic continental margins. In this convergence zone, methyl sulphides served as a non-competitive substrate supporting methane generation and methanethiol inhibited anaerobic oxidation of methane, resulting in the buildup of CH4, formation of degassing cracks in sediments and an increase in the benthic methane flux from sediments. Precipitation of crack-filling microspar was driven by methanogenesis-related alkalinity accumulation. Deep ocean ventilation and oxygenation around 750 Ma brought molar tooth structures to an end.

  12. MICROWAVE PROPAGATION IN TOOTH AND DENTAL DEFECT

    Directory of Open Access Journals (Sweden)

    Maria Papezova

    2016-09-01

    Full Text Available INTRODUCTION:The most common method of conventional dental diagnosisinvolves X-rays, such as Radio Tomography (RT or Computer Tomography (CT. Such methods are used for diagnosing pores in dental material that can lead to premature failure of dental material. Diagnosis by X-ray provides an objective analysis. However, repeated radiation from X-rays can cause biological damage to human tissues. From this point of view, there is a significant need to progress to quantitative non-invasive and non-destructive testing (NDT methods to measure dental material and improve treatment options. This article focuses on applying microwave technology to characterize teeth and teeth replacements. Knowledge of microwave propagation in biomaterial with no defects, using a defined microwave frequency range, and subsequently comparing the result with defective material could provide a means of dental diagnosis without the risk of radiation for the patient, i.e. without X-ray. OBJECTIVES: The primary objective of this study was to examine microwave technology in the field of dental medical diagnosis as a new NDT method. METHODS: The basic concept of applying microwave technology to characterize teeth in dental diagnosis was examined using a basic algorithm designed in the MATLAB programming language. Tests used dielectric properties of tooth and tooth decay and propagated electromagnetic (EM waves to show different characteristics of chosen materials.RESULTS: The analyses of frequency dependent reflection and transmission coefficients of the chosen material, specificallyteeth, atfrequency range 0 GHz to 30 GHz, computed differences between healthy and defective dental material.CONCLUSION: Thus, this could be used in providing a dental diagnosis without exposing patients to radiation, i.e. without X-ray. The next stage will involve creating a complete model of a jaw with teeth, and designing a sensor for crack detection for comparisons using this basic algorithm.

  13. Tooth engineering: searching for dental mesenchymal cells sources.

    Directory of Open Access Journals (Sweden)

    Laetitia eKeller

    2011-03-01

    Full Text Available The implantation of cultured re-associations between embryonic dental mesenchymal cells and epithelial cells from mouse molars at ED14 allowed making full teeth with crown, root, periodontal ligament fibers and bone. Although representing valuable tools to set up methodologies embryonic cells are not easily available. This work thus aimed to replace the embryonic cells by dental mesenchymal cell lines or cultured expanded embryonic cells, and to test their ability to mediate tooth development in vitro when re-associated with a competent dental epithelium. Histology, immunostaining and RT-PCR allowed getting complementary sets of results. Two different immortalized cell lines from ED18 dental mesenchyme failed in mediating tooth formation. The potentialities of embryonic dental mesenchymal cells decreased from ED14 to ED16 and were lost at ED18. This is likely related to a change in the mesenchymal cell phenotype and/or populations during development. Attempts to cultivate ED14 or ED16 embryonic dental mesenchymal cells prior to re-association led to the loss of their ability to support tooth development. This was accompanied by a down-regulation of Fgf3 transcription. Supplementation of the culture medium with FGF2 allowed restoring Fgf3 expression, but not the ability of mesenchymal cells to engage in tooth formation. Altogether, these observations suggest that a competent cell population exists in the dental mesenchyme at ED14, progressively decreases during development, and cannot as such be maintained in vitro. This study evidenced the need for specific conditions to maintain the ability of dental mesenchymal cells to initiate whole tooth formation, when re-associated with an odontogenic epithelium. Efforts to improve the culture conditions will have to be combined with attempts to characterize the competent cells within the dental mesenchyme.

  14. Multiphoton microscopy imaging of developing tooth germs

    Directory of Open Access Journals (Sweden)

    Pei-Yu Pan

    2014-01-01

    Conclusion: In this study, a novel multiphoton microscopy database of images from developing tooth germs in mice was set up. We confirmed that multiphoton laser microscopy is a powerful tool for investigating the development of tooth germ and is worthy for further application in the study of tooth regeneration.

  15. 21 CFR 872.3920 - Porcelain tooth.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Porcelain tooth. 872.3920 Section 872.3920 Food... DEVICES DENTAL DEVICES Prosthetic Devices § 872.3920 Porcelain tooth. (a) Identification. A porcelain tooth is a prefabricated device made of porcelain powder for clinical use (§ 872.6660) intended for...

  16. [Tooth regeneration--dream to reality].

    Science.gov (United States)

    Wang, Song-Ling; Wang, Xue-Jiu

    2008-04-01

    Tooth or dentition missing compromises human health physically and psychiatrically. Although several prosthesis methods are used to restore tooth loss, these restorations are still non-biological methods. It is a dream for human being to regenerate a real tooth for hundreds years. There are two ways to regenerate the tooth. One is application of conventional tissue engineering techniques including seed cells and scaffold. The other is regeneration tooth using dental epithelium and dental mesenchymal cells based on the knowledge of tooth initiation and development. Marked progress has been achieved in these two ways, while there is still a long way to go. Recently a new concept has been proposed for regeneration of a biological tooth root based on tooth-related stem cells and tissue engineering technique. A biological tooth root has been regenerated in swine. It may be a valuable method for restoration of tooth loss before successful whole tooth regeneration. A latest research showed that a subpopulation in bone marrow cells can give rise to ameloblast-like cells when mixed with embryonic epithelium and reassociation with integrated mesenchyme, which may provide a new seed cell source for tooth regeneration.

  17. Mechanism of human tooth eruption

    DEFF Research Database (Denmark)

    Kjær, Inger

    2014-01-01

    discussed in the introduction. Human studies, mainly clinical and radiological, have focused on normal eruption and gender differences. Why a tooth begins eruption and what enables it to move eruptively and later to end these eruptive movements is not known. Pathological eruption courses contribute...

  18. Erosive Potential of Cola and Orange Fruit Juice on Tooth Colored ...

    African Journals Online (AJOL)

    is defined as an irreversible loss of dental hard tissue by a chemical process ... replacement of lost tooth structure is usually desired to restore esthetics and .... Specimens were finished and polished with Sof‑Lex disks. (3M, St. Paul, MN, USA) ...

  19. Bio-ag reutilization of distiller’s dried grains with solubles (DDGS) as a substrate for black soldier fly larvae, Hermetia illucens, along with poultry by-product meal and soybean meal, as total replacement of fish meal in

    Science.gov (United States)

    A feeding trial was conducted in a closed system with Nile tilapia, Oreochromis niloticus, juveniles (mean initial weight, 2.66 g) to examine total replacement of menhaden fish meal (FM) with distiller’s dried grains with solubles (DDGS), which had been used as substrate for the production of black ...

  20. COMPUTED TOMOGRAPHY OF TOOTH RESORPTION IN CATS.

    Science.gov (United States)

    Lang, Linda G; Wilkinson, Thomas E; White, Tammy L; Farnsworth, Raelynn K; Potter, Kathleen A

    2016-09-01

    Tooth resorption is the most common dental disease in cats and can be a source of oral pain. The current clinical gold standard for diagnosis includes a combination of oral exam and dental radiography, however early lesions are not always detected. Computed tomography (CT) of the skull, including the dental arches, is a commonly performed diagnostic procedure, however the appearance of tooth resorption on CT and the diagnostic ability of CT to detect tooth resorption have not been evaluated. The purpose of this prospective, descriptive, diagnostic accuracy study was to characterize the CT appearance of tooth resorption in a sample of affected cats and to evaluate the sensitivity and specificity of CT for tooth resorption compared to the clinical gold standard of oral exam and intraoral dental radiography. Twenty-eight cat cadaver specimens were recruited for inclusion. Each specimen was evaluated using oral exam, intraoral dental radiography, and computed tomography (four different slice thicknesses). Each tooth was evaluated for the presence or absence of tooth resorption. Teeth with lesions and a subset of normal teeth were evaluated with histopathology. On CT, tooth resorption appeared as irregularly marginated hypoattenuating defects in the mineral attenuating tooth components, most commonly involving the root or cementoenamel junction. Sensitivity for CT detection of tooth resorption was fair to poor (42.2-57.7%) and specificity was good to excellent (92.8-96.3%). Findings from this study indicated that CT has high specificity but low sensitivity for detection of tooth resorption in cats.

  1. Fluoridation and tooth wear in Irish adults.

    LENUS (Irish Health Repository)

    Burke, F M

    2010-10-01

    The aim of this study was to determine the prevalence of tooth wear in adults in Ireland and its relationship with water fluoridation. The National Survey of Adult Oral Health was conducted in 2000\\/2001. Tooth wear was determined using a partial mouth examination assessing the upper and lower anterior teeth. A total of 2456 subjects were examined. In this survey, increasing levels and severity of tooth wear were associated with ageing. Men were more affected by tooth wear and were more likely to be affected by severe tooth wear than women. It was found that age, and gender were significant predictors of tooth wear (P < 0.01). Overall, there was no significant relationship between fluoridation and tooth wear in this study.

  2. Performance of collagen sponge as a 3-D scaffold for tooth-tissue engineering.

    Science.gov (United States)

    Sumita, Yoshinori; Honda, Masaki J; Ohara, Takayuki; Tsuchiya, Shuhei; Sagara, Hiroshi; Kagami, Hideaki; Ueda, Minoru

    2006-06-01

    Tooth structure can be regenerated by seeding dissociated tooth cells onto polyglycolic acid fiber mesh, although the success rate of tooth production is low. The present study was designed to compare the performance of collagen sponge with polyglycolic acid fiber mesh as a 3-D scaffold for tooth-tissue engineering. Porcine third molar teeth at the early stage of crown formation were enzymatically dissociated into single cells, and the heterogeneous cells were seeded onto collagen sponge or the polyglycolic acid fiber mesh scaffolds. Scaffolds were then cultured to evaluate cell adhesion and ALP activity in vitro. An in vivo analysis was performed by implanting the constructs into the omentum of immunocompromised rats and evaluating tooth production up to 25 weeks. After 24h, there were a significantly higher number of cells attached to the collagen sponge scaffold than the polyglycolic acid fiber mesh scaffold. Similarly, the ALP activity was significantly higher for the collagen sponge scaffold was than the polyglycolic acid fiber mesh scaffold after 7 days of culture. The area of calcified tissue formed in the collagen sponge scaffold was also larger than in the polyglycolic acid fiber mesh scaffold. The results from in vivo experiments show conclusively that a collagen sponge scaffold allows tooth production with a higher degree of success than polyglycolic acid fiber mesh. Taken together, the results from this study show that collagen sponge scaffold is superior to the polyglycolic acid fiber mesh scaffold for tooth-tissue engineering.

  3. Tooth sensitivity: mechanisms and management.

    Science.gov (United States)

    Markowitz, K

    1993-08-01

    Tooth sensitivity is a common complaint encountered in clinical practice. Exposed superficial dentin is free of nerve endings, yet sensitive. Experimental evidence indicates that stimuli, such as probing the dentin surface and air blasts, induce fluid movements in the dentinal tubules and these fluid movements, in turn, activate the intradental nerves. The condition of the dentin surface is critically important in allowing this process. In addition, the internal environment of the pulp may influence nerve excitability. Therapies for tooth sensitivity include both agents that obstruct the dentinal tubules and agents that can decrease the excitability of the intradental nerves. The exact treatment used depends on the etiology of the individual's problem and the extent of dentinal tissue damage.

  4. Towards tooth friendly soft drinks.

    Science.gov (United States)

    Kolahi, Jafar; Fazilati, Mohamad; Kadivar, Mahdi

    2009-10-01

    Most soft drinks contain high concentration of simple carbohydrates and have a pH of 3 or even lower. Therefore, they are harmful for tooth structure. A tooth friendly soft drink (T.F.S.D) should have the following characteristics and elements; fluoride (approximately 1 ppm), casein phosphopeptide-amorphous calcium phosphate (2%), xylitol (4-6g/serving), tea polyphenols (2-4 mg/ml), cranberry extract (250 mg/ml of the flavonoids quercetin and myricetin), sugar free, pH close to 5.5 and super oxygenation (240,000 ppm) vs. carbonation. T.F.S.D can be packaged in a container which gaseous oxygen is dissolved in a liquid in the form of bubbles. However, looking at opportunities for so-called sophisticated soft drinks, T.F.S.D will be an example for a functional and health oriented soft drink.

  5. Supernumerary Jawbone Tooth: Clinical Case

    OpenAIRE

    Rivas Gutiérrez, Jesús; Carlos Sánchez, María Dolores

    2016-01-01

    Introduction: supernumerary teeth are dental development anomalies, alsoknown as hyperdontia or extra teeth. Their prevalence ranges between 0.3% and 3.8%.Their morphology may be normal or dismorphic and are associated to the etiology ofocclusal alterations. It is important to make an early diagnostic through a radiographicalstudy. Case presentation:this article presents a clinical case of a supernumerary tooth thatcaused rotation and crowding of the anterior bottom teeth, which was addressed...

  6. Charcot-Marie-Tooth disease.

    LENUS (Irish Health Repository)

    Reilly, Mary M

    2011-03-01

    Charcot-Marie-Tooth (CMT) disease is the commonest inherited neuromuscular disorder affecting at least 1 in 2,500. Over the last two decades, there have been rapid advances in understanding the molecular basis for many forms of CMT with more than 30 causative genes now described. This has made obtaining an accurate genetic diagnosis possible but at times challenging for clinicians. This review aims to provide a simple, pragmatic approach to diagnosing CMT from a clinician\\'s perspective.

  7. Optical spectroscopy and tooth decay

    Science.gov (United States)

    Misra, P.; De, T.; Singh, R.

    2005-11-01

    Optical spectroscopy in the ultraviolet, visible and mid-infrared spectral regions has been used to discriminate between healthy and diseased teeth of patients in the age range 15-75 years. Spectral scans of absorbance versus wavenumber and fluorescence intensity versus wavelength have been recorded and investigated for caries and periodontal disease. Such optical diagnostics can prove very useful in the early detection and treatment of tooth decay.

  8. Epithelial histogenesis during tooth development.

    Science.gov (United States)

    Lesot, H; Brook, A H

    2009-12-01

    This paper reviews the current understanding of the progressive changes mediating dental epithelial histogenesis as a basis for future collaborative studies. Tooth development involves morphogenesis, epithelial histogenesis and cell differentiation. The consecutive morphological stages of lamina, bud, cap and bell are also characterized by changes in epithelial histogenesis. Differential cell proliferation rates, apoptosis, and alterations in adhesion and shape lead to the positioning of groups of cells with different functions. During tooth histo-morphogenesis changes occur in basement membrane composition, expression of signalling molecules and the localization of cell surface components. Cell positional identity may be related to cell history. Another important parameter is cell plasticity. Independently of signalling molecules, which play a major role in inducing or modulating specific steps, cell-cell and cell-matrix interactions regulate the plasticity/rigidity of particular domains of the enamel organ. This involves specifying in space the differential growth and influences the progressive tooth morphogenesis by shaping the epithelial-mesenchymal junction. Deposition of a mineralized matrix determines the final shape of the crown. All data reviewed in this paper were investigated in the mouse.

  9. Tooth brushing for oral prophylaxis

    Directory of Open Access Journals (Sweden)

    Haruaki Hayasaki, DDS, PhD

    2014-08-01

    Full Text Available Control of plaque and debris is essential for the prevention of inflammatory periodontal diseases and dental caries, because plaque is the primary etiological factor in the introduction and development of both of these infection-oriented diseases. Plaque removal with a toothbrush is the most frequently used method of oral hygiene. Powered toothbrushes were developed beginning in the 1960s and are now widely used in developed countries. The bristles of a toothbrush should be able to reach and clean efficiently most areas of the mouth, and recently the design of both manual and powered toothbrushes has focused on the ability to reach and clean interproximal tooth surfaces. An individual's tooth brushing behavior, including force, duration, motivation and motion, are also critical to tooth brushing efficacy. Dental floss and the type of toothpaste play additional important roles as auxiliary tools for oral prophylaxis. Dental professionals should help their care-receivers’ meet the requirements of oral hygiene to maintain their QOL. This article reviews these topics.

  10. Structure, attachment, replacement and growth of teeth in bluefish, Pomatomus saltatrix (Linnaeus, 1776), a teleost with deeply socketed teeth.

    Science.gov (United States)

    Bemis, William E; Giuliano, Anne; McGuire, Betty

    2005-01-01

    Tooth replacement poses many questions about development, pattern formation, tooth attachment mechanisms, functional morphology and the evolution of vertebrate dentitions. Although most vertebrate species have polyphyodont dentitions, detailed knowledge of tooth structure and replacement is poor for most groups, particularly actinopterygians. We examined the oral dentition of the bluefish, Pomatomus saltatrix, a pelagic and coastal marine predator, using a sample of 50 individuals. The oral teeth are located on the dentary and premaxillary bones, and we scored each tooth locus in the dentary and premaxillary bones using a four-part functional classification: absent (A), incoming (I), functional (F=fully ankylosed) or eroding (E). The homodont oral teeth of Pomatomus are sharp, deeply socketed and firmly ankylosed to the bone of attachment. Replacement is intraosseus and occurs in alternate tooth loci with long waves of replacement passing from rear to front. The much higher percentage of functional as opposed to eroding teeth suggests that replacement rates are low but that individual teeth are quickly lost once erosion begins. Tooth number increases ontogenetically, ranging from 15-31 dentary teeth and 15-39 premaxillary teeth in the sample studied. Teeth increase in size with every replacement cycle. Remodeling of the attachment bone occurs continuously to accommodate growth. New tooth germs originate from a discontinuous dental lamina and migrate from the lingual (dentary) or labial (premaxillary) epithelium through pores in the bone of attachment into the resorption spaces beneath the existing teeth. Pomatomus shares unique aspects of tooth replacement with barracudas and other scombroids and this supports the interpretation that Pomatomus is more closely related to scombroids than to carangoids.

  11. Power Plant Replacement Study

    Energy Technology Data Exchange (ETDEWEB)

    Reed, Gary

    2010-09-30

    This report represents the final report for the Eastern Illinois University power plant replacement study. It contains all related documentation from consideration of possible solutions to the final recommended option. Included are the economic justifications associated with the chosen solution along with application for environmental permitting for the selected project for construction. This final report will summarize the results of execution of an EPC (energy performance contract) investment grade audit (IGA) which lead to an energy services agreement (ESA). The project includes scope of work to design and install energy conservation measures which are guaranteed by the contractor to be self‐funding over its twenty year contract duration. The cost recovery is derived from systems performance improvements leading to energy savings. The prime focus of this EPC effort is to provide a replacement solution for Eastern Illinois University’s aging and failing circa 1925 central steam production plant. Twenty‐three ECMs were considered viable whose net impact will provide sufficient savings to successfully support the overall project objectives.

  12. Power Plant Replacement Study

    Energy Technology Data Exchange (ETDEWEB)

    Reed, Gary

    2010-09-30

    This report represents the final report for the Eastern Illinois University power plant replacement study. It contains all related documentation from consideration of possible solutions to the final recommended option. Included are the economic justifications associated with the chosen solution along with application for environmental permitting for the selected project for construction. This final report will summarize the results of execution of an EPC (energy performance contract) investment grade audit (IGA) which lead to an energy services agreement (ESA). The project includes scope of work to design and install energy conservation measures which are guaranteed by the contractor to be self-funding over its twenty year contract duration. The cost recovery is derived from systems performance improvements leading to energy savings. The prime focus of this EPC effort is to provide a replacement solution for Eastern Illinois University's aging and failing circa 1925 central steam production plant. Twenty-three ECMs were considered viable whose net impact will provide sufficient savings to successfully support the overall project objectives.

  13. Power Plant Replacement Study

    Energy Technology Data Exchange (ETDEWEB)

    Reed, Gary

    2010-09-30

    This report represents the final report for the Eastern Illinois University power plant replacement study. It contains all related documentation from consideration of possible solutions to the final recommended option. Included are the economic justifications associated with the chosen solution along with application for environmental permitting for the selected project for construction. This final report will summarize the results of execution of an EPC (energy performance contract) investment grade audit (IGA) which lead to an energy services agreement (ESA). The project includes scope of work to design and install energy conservation measures which are guaranteed by the contractor to be self-funding over its twenty year contract duration. The cost recovery is derived from systems performance improvements leading to energy savings. The prime focus of this EPC effort is to provide a replacement solution for Eastern Illinois University’s aging and failing circa 1925 central steam production plant. Twenty-three ECMs were considered viable whose net impact will provide sufficient savings to successfully support the overall project objectives.

  14. Double emulsions as fat replacers

    NARCIS (Netherlands)

    Oppermann, Anika

    2017-01-01

    The use of double (w1/o/w2) emulsions, in which part of the oil is replaced by small water droplets, is a promising strategy to reduce oil content in food products. For successful applications, (1) significant levels of fat reduction (i.e. significant amounts of water inside the oil droplets) have

  15. Community replacement instead of drowning: Evolution of proto-North Atlantic carbonate-platform production in the run-up to of the Early Aptian OAE1a

    Science.gov (United States)

    Huck, Stefan; Stein, Melody; Adatte, Thierry; Föllmi, Karl B.; Immenhauser, Adrian; Heimhofer, Ulrich

    2014-05-01

    In the proto-North Atlantic realm (Lusitanian Basin, Portugal), carbonate platform production witnessed a major biotic turnover during the Early Aptian. Here, Urgonian-type rudist-nerinid dominated limestones were replaced by an orbitolinid-rich, oyster and serpulid-bearing marly facies. Integrated biostratigraphic-chemostratigraphic studies (Burla et al., 2008; Huck et al., 2012) provided evidence that this change coincides with the Early Aptian carbonate platform drowning episode in the run-up of oceanic anoxic event (OAE) 1a (transition D. forbesi to D. deshayesi ammonite zones), which has been recorded, from many localities in the Tethyan Ocean (Godet, 2013). Unlike Helvetic and Arabian carbonate platforms, which are characterised by a punctuated mass occurrence of orbitolinids marking the onset of the Aptian (Rawil and Hawar members, respectively), orbitolinids are an abundant constituent of the proto-North Atlantic carbonate platform community from the Late Barremian onwards. Orbitolinid-rich packstones and marls showing mass-occurrences of orbitolinids indicate repeated short-term installation of specific environmental conditions (eutrophication and/or deepening). In order to critically assess the influence of regional palaeoenvironmental against global palaeoclimatic and palaeoceanographic changes on the Proto-North Atlantic carbonate platform evolution, several outcrop successions in the Lusitanian Basin covering the critical interval have been investigated in detail with regard to facies and petrographic characteristics and geochemical (C-/O-isotopes, P content, bulk-rock and clay mineralogy,) inventory. The aims of the present study are three-fold: (1) to characterise proto-North Atlantic Lower Aptian shallow-water carbonates with respect to diagenetic history, microfacies, and distribution of fossils useful for the analysis of palaeoenvironments (corals, rudists and orbitolinids); (2) to evaluate the influence of sea-level and humidity changes

  16. Homologous gene replacement in Physarum

    Energy Technology Data Exchange (ETDEWEB)

    Burland, T.G. [Univ. of Wisconsin, Madison, WI (United States); Pallotta, D. [Laval Univ., Quebec (Canada)

    1995-01-01

    The protist Physarum polycephalum is useful for analysis of several aspects of cellular and developmental biology. To expand the opportunities for experimental analysis of this organism, we have developed a method for gene replacement. We transformed Physarum amoebae with plasmid DNA carrying a mutant allele, ardD{Delta}1, of the ardD actin gene; ardD{Delta}1 mutates the critical carboxy-terminal region of the gene product. Because ardD is not expressed in the amoeba, replacement of ardD{sup +} with ardD{Delta}1 should not be lethal for this cell type. Transformants were obtained only when linear plasmid DNA was used. Most transformants carried one copy of ardD{Delta}1 in addition to ardD{sup +}, but in two (5%), ardD{sup +} was replaced by a single copy of ardD{Delta}1. This is the first example of homologous gene replacement in Physarum. ardD{Delta}1 was stably maintained in the genome through growth, development and meiosis. We found no effect of ardD{Delta}l on viability, growth, or development of any of the various cell types of Physarum. Thus, the carboxy-terminal region of the ardD product appears not to perform a unique essential role in growth or development. Nevertheless, this method for homologous gene replacement can be applied to analyze the function of any cloned gene. 38 refs., 6 figs., 1 tab.

  17. Características do tipo de alimentação e da fala de crianças com e sem apinhamento dentário Characteristics of food consistence and speech production in children with normal occlusion and malocclusion related to tooth crowding

    Directory of Open Access Journals (Sweden)

    Cláudia Ribeiro Pena

    2008-03-01

    Full Text Available OBJETIVO: caracterizar o tipo de consistência alimentar e a articulação da fala em crianças com oclusão normal e com apinhamento dentário, verificando-se possíveis correlações e interferências. MÉTODOS: participaram 60 crianças, de ambos os sexos, entre 7 e 12 anos, divididas em dois grupos. G1: 30 crianças com apinhamento dentário, G2: 30 crianças sem apinhamento dentário, conforme avaliação odontológica. Foram critérios de exclusão: déficits neurológicos e cognitivos, presença de hábitos orais, respiração oral crônica, deformações dentofaciais, realização de tratamento ortopédico/ortodôntico e/ou fonoaudiológico. Foram realizadas: avaliação do sistema estomatognático; avaliação odontológica quanto à situação dento-oclusal; aplicação de questionários aos pais visando contemplar critérios de exclusão e definir os hábitos alimentares quanto à sua consistência; avaliação de fala quanto à produção fonética e fonológica. RESULTADOS: crianças sem apinhamento dentário têm alimentação predominantemente dura, enquanto aquelas com apinhamento dentário têm alimentação predominantemente amolecida; caracterizada principalmente pelo hábito de ingestão de líquido na presença do alimento na boca. Quanto à fala, não foram encontradas alterações significativas independente do apinhamento dentário e do tipo de consistência alimentar. CONCLUSÃO: há indícios de que a presença do apinhamento dentário relaciona-se à consistência alimentar. A alimentação amolecida parece constituir provável fator etiológico ou contribuinte à existência do apinhamento dentário. O tipo de alimentação e a presença de apinhamento dentário parecem não interferir na articulação da fala.PURPOSE: to characterize the kind of food consistence and speech production in children with normal occlusion and malocclusion related to tooth crowding, as well as to verify possible correlations and

  18. Shoulder Joint Replacement

    Science.gov (United States)

    ... Shoulder Replacement Options Shoulder replacement surgery is highly technical. It should be performed by a surgical team ... area and will meet a doctor from the anesthesia department. You, your anesthesiologist, and your surgeon will ...

  19. Partial knee replacement - slideshow

    Science.gov (United States)

    ... page: //medlineplus.gov/ency/presentations/100225.htm Partial knee replacement - series—Normal anatomy To use the sharing ... A.M. Editorial team. Related MedlinePlus Health Topics Knee Replacement A.D.A.M., Inc. is accredited ...

  20. Tooth erosion caused by chewing aspirin.

    Science.gov (United States)

    Grace, Edward G; Sarlani, Eleni; Kaplan, Sarit

    2004-07-01

    Although the effects of aspirin on the oral mucosa are well-documented, there is little documentation of the effects of aspirin-chewing on the enamel and dentin. The authors present two cases of patients with damage to their tooth enamel and dentin. Both patients had similiar symptoms, but had not been told that chewing aspirin could harm tooth structure. The authors identify clinical signs and symptoms and discuss ways to prevent erosion. The common factor in these cases is that aspirin was the only possible cause of the tooth erosion. Dentists should be aware of the effects of aspirin-chewing on tooth structure and advise their patients accordingly.

  1. Cracked tooth syndrome: Overview of literature

    OpenAIRE

    Hasan, Shamimul; Singh, Kuldeep; Salati, Naseer

    2015-01-01

    Pain is defined as an “unpleasant sensory and emotional feeling which is associated with actual or potential injury of tissue or expressed in terms of such injury.” Tooth pain usually refers to pain around the teeth or jaws mainly as a result of a dental condition. Mostly, toothaches are caused by a carious cavity, a broken tooth, an exposed tooth root or gum disease. The toothache may sometimes be the result of radiating pain from structures in the vicinity of tooth and jaws (cardiac pain, e...

  2. China’s Industry of Condenser & Evaporator for Refrigerator——Replacement of Copper by Aluminum Goes Smoothly and Trends of High-end Products Are Obvious

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    <正>Aluminum and copper are main raw materials in manufacturing of condenser & evaporator for refrigerator. In 2011, in order to sieve the initiatives, condenser & evaporator manufacturers began to muscle into the upstream fields of manufacturing of aluminum and copper refrigeration components. Replacement of copper by aluminum went smoothly in manufacturing

  3. Ultrasonic hearing and echolocation in the earliest toothed whales.

    Science.gov (United States)

    Park, Travis; Fitzgerald, Erich M G; Evans, Alistair R

    2016-04-01

    The evolution of biosonar (production of high-frequency sound and reception of its echo) was a key innovation of toothed whales and dolphins (Odontoceti) that facilitated phylogenetic diversification and rise to ecological predominance. Yet exactly when high-frequency hearing first evolved in odontocete history remains a fundamental question in cetacean biology. Here, we show that archaic odontocetes had a cochlea specialized for sensing high-frequency sound, as exemplified by an Oligocene xenorophid, one of the earliest diverging stem groups. This specialization is not as extreme as that seen in the crown clade. Paired with anatomical correlates for high-frequency signal production in Xenorophidae, this is strong evidence that the most archaic toothed whales possessed a functional biosonar system, and that this signature adaptation of odontocetes was acquired at or soon after their origin.

  4. Proteoglycans and orthodontic tooth movement.

    Science.gov (United States)

    Waddington, R J; Embery, G

    2001-12-01

    Proteoglycans represent an important and diverse family of extracellular matrix components within the connective tissues of the periodontium. This review focuses on the function and metabolism of the various proteoglycans in periodontal tissues, such as alveolar bone and periodontal ligament, and considers their potential fate in response to an orthodontic force. Such considerations provide an important background in evaluating the potential for proteoglycan metabolites, alongside other connective tissue metabolites, as biomarkers for assessing the deep-seated metabolic changes and as a diagnostic tool in monitoring orthodontic tooth movement.

  5. Esthesioneuroblastoma presenting as tooth pain

    Directory of Open Access Journals (Sweden)

    Parvathi Devi

    2014-01-01

    Full Text Available Esthesioneuroblastoma, also called olfactory neuroblastoma, is a rare malignant tumor originating in the olfactory epithelium in the upper nasal cavity with intracranial extension and may also be associated with secondary sinus diseases. Esthesioneuroblastoma has been observed to cause death by distant metastasis or by invasion through the cribriform plate and secondary meningitis. It usually produces nasal obstruction, epistaxis and less commonly anosmia, headache and pain. We report a case of esthesioneuroblastoma in a 50-year-old female who reported with tooth pain as a presenting symptom.

  6. Esthesioneuroblastoma presenting as tooth pain.

    Science.gov (United States)

    Devi, Parvathi; Bhavle, Radhika; Aggarwal, Avanti; Walia, Cherry

    2014-09-01

    Esthesioneuroblastoma, also called olfactory neuroblastoma, is a rare malignant tumor originating in the olfactory epithelium in the upper nasal cavity with intracranial extension and may also be associated with secondary sinus diseases. Esthesioneuroblastoma has been observed to cause death by distant metastasis or by invasion through the cribriform plate and secondary meningitis. It usually produces nasal obstruction, epistaxis and less commonly anosmia, headache and pain. We report a case of esthesioneuroblastoma in a 50-year-old female who reported with tooth pain as a presenting symptom.

  7. Adhesion to tooth structure mediated by contemporary bonding systems.

    Science.gov (United States)

    Stangel, Ivan; Ellis, Thomas H; Sacher, Edward

    2007-07-01

    Given the enormity of the field of adhesion and the number of commercial products available, the discipline of modern adhesive dentistry can be daunting with respect to materials and techniques. This article organizes contemporary bonding practice and materials around an understanding of the fundamentals of adhesion to tooth structure. In providing this context, adhesive development, bonding systems, and their appropriate use are better understood. The end result is the better practice of adhesive dentistry.

  8. Intra-epithelial requirement of canonical Wnt signaling for tooth morphogenesis.

    Science.gov (United States)

    Zhu, XiaoJing; Zhao, Pan; Liu, YuDong; Zhang, XiaoYun; Fu, Jiang; Ivy Yu, H-M; Qiu, Mengsheng; Chen, YiPing; Hsu, Wei; Zhang, Zunyi

    2013-04-26

    Multiple Wnt ligands are expressed in the developing tooth and play important and redundant functions during odontogenesis. However, the source of Wnt ligands and their targeting cells and action mechanism in tooth organogenesis remain largely elusive. Here we show that epithelial inactivation of Gpr177, the mouse Wntless (Wls) whose product regulates Wnt sorting and secretion, leads to arrest of tooth development at the early cap stage and abrogates tooth-forming capability of the dental epithelium. Gpr177 in the epithelium is necessary for the activation of canonical Wnt signaling in the dental epithelium and formation of a functional enamel knot. Epithelial deletion of Gpr177 results in defective gene expression and cellular behavior in the dental epithelium but does not alter odontogenic program in the mesenchyme. Furthermore, deletion of Axin2, a negative intracellular regulator of canonical Wnt signaling, rescues the tooth defects in mice carrying Gpr177 mutation in the dental epithelium. Together with the fact that active Wnt canonical signaling is present predominantly in the dental epithelium during tooth development, our results demonstrate that Gpr177-mediated Wnt ligands in the dental epithelium act primarily in an intra-epithelial context to regulate enamel knot formation and subsequent tooth development.

  9. Stem cell sources for tooth regeneration: current status and future prospects

    Directory of Open Access Journals (Sweden)

    Keishi eOtsu

    2014-02-01

    Full Text Available Stem cells are capable of renewing themselves through cell division and have the remarkable ability to differentiate into many different types of cells. They therefore have the potential to become a central tool in regenerative medicine. During the last decade, advances in tissue engineering and stem cell-based tooth regeneration have provided realistic and attractive means of replacing lost or damaged teeth. Investigation of embryonic and adult (tissue stem cells as potential cell sources for tooth regeneration has led to many promising results. However, technical and ethical issues have hindered the availability of these cells for clinical application. The recent discovery of induced pluripotent stem (iPS cells has provided the possibility to revolutionize the field of regenerative medicine (dentistry by offering the option of autologous transplantation. In this article, we review the current progress in the field of stem cell-based tooth regeneration and discuss the possibility of using iPS cells for this purpose.

  10. Future dentistry: cell therapy meets tooth and periodontal repair and regeneration.

    Science.gov (United States)

    Catón, Javier; Bostanci, Nagihan; Remboutsika, Eumorphia; De Bari, Cosimo; Mitsiadis, Thimios A

    2011-05-01

    Cell-based tissue repair of the tooth and - tooth-supporting - periodontal ligament (PDL) is a new attractive approach that complements traditional restorative or surgical techniques for replacement of injured or pathologically damaged tissues. In such therapeutic approaches, stem cells and/or progenitor cells are manipulated in vitro and administered to patients as living and dynamic biological agents. In this review, we discuss the clonogenic potential of human dental and periodontal tissues such as the dental pulp and the PDL and their potential for tooth and periodontal repair and/or regeneration. We propose novel therapeutic approaches using stem cells or progenitor cells, which are targeted to regenerate the lost dental or periodontal tissue.

  11. Stem cell sources for tooth regeneration: current status and future prospects.

    Science.gov (United States)

    Otsu, Keishi; Kumakami-Sakano, Mika; Fujiwara, Naoki; Kikuchi, Kazuko; Keller, Laetitia; Lesot, Hervé; Harada, Hidemitsu

    2014-01-01

    Stem cells are capable of renewing themselves through cell division and have the remarkable ability to differentiate into many different types of cells. They therefore have the potential to become a central tool in regenerative medicine. During the last decade, advances in tissue engineering and stem cell-based tooth regeneration have provided realistic and attractive means of replacing lost or damaged teeth. Investigation of embryonic and adult (tissue) stem cells as potential cell sources for tooth regeneration has led to many promising results. However, technical and ethical issues have hindered the availability of these cells for clinical application. The recent discovery of induced pluripotent stem (iPS) cells has provided the possibility to revolutionize the field of regenerative medicine (dentistry) by offering the option of autologous transplantation. In this article, we review the current progress in the field of stem cell-based tooth regeneration and discuss the possibility of using iPS cells for this purpose.

  12. Post-Odontoma autotransplantation of an impacted tooth: A case report.

    Science.gov (United States)

    Robindro Singh, Waikhom; Aheibam, Kirankumar; Nameirakpam, Anthopia

    2015-01-01

    After years of relegation by dental implants, autotransplantation has recently become more popular because of a better understanding of its science. The prognosis of autotransplantation primarily depends upon the presence of an intact alveolar bone at the transplant site and the regeneration of a functional periodontal ligament of the transplant. Replacement of an unsalvaged or a missing tooth by a natural tooth with normal periodontium within a short duration of treatment is the ultimate challenge of autotransplantation. Meanwhile, Platelet Rich Fibrin (PRF) is popular as a biomaterial which helps in the regeneration of bone and periodontal tissues. To improve the prognosis, and also shorten the treatment time in a rare case of autotransplantation of an impacted tooth in a post-odontoma site, we did a two-stage surgical procedure aided by synthetic bone granules (Biograft) and PRF. The clinical and radiological findings at 6 months follow-up showed good result and promise.

  13. Pediatric tooth extractions under sedoanalgesia

    Science.gov (United States)

    Arpaci, Ayse Hande; Isik, Berrin

    2016-01-01

    Objective: The present study aims to evaluate intravenous ketamine and inhalation sedation in children, their unwanted side-effects and surgeon satisfaction. Methods: In this study, data of 922 children aged between 1-18 who underwent tooth extraction under sedoanalgesia in our department between September 2015-January 2016 were gathered and anesthesia approaches, unwanted side effects and surgical satisfaction was investigated. Postoperative recovery emergence agitation or delirium was evaluated with Watcha Behavior Scale (WBS). Results: Patients were grouped and compared according to acceptance of intravenous line placement (Group-1) or not (Group- 2). Group 1 received intravenous ketamine anesthesia (n=822), Group 2 received inhalation anesthesia with sevoflurane (n=100). Number of patients, age, weight and gender was significantly different in two groups. When side effects were investigated nausea was observed in 30 patients (3.6%), skin rashes were observed in 26 patients (3.2%) in Group-1 while skin rashes were observed in one patient (1%) in Group 2. 95% of surgeons reported intravenous anesthesia, 18% of surgeons reported inhalation anesthesia to be the anesthesia of choice. Emergence of postoperative recovery agitation (WBS≥3) was observed more frequent in Group 2 (p<0.05) than Group 1. Conclusion: Ketamine, which has analgesic, hypnotic and amnestic effects and which does not alter pharyngeal and laryngeal reflexes thus minimizes aspiration possibility, is a safe and effective anesthetic agent for tooth extractions of the pediatric population under sedoanalgesia. PMID:27882039

  14. Replacement of hopeless retained primary teeth by immediate dental implants: a case report.

    Science.gov (United States)

    de Oliveira, Rafael R; Macedo, Guilherme O; Muglia, Valdir A; Souza, Sérgio L S; Novaes, Arthur B; Taba, Mário

    2009-01-01

    Hopeless retained primary teeth without permanent successors represent a restorative challenge for clinicians, along with esthetic and functional problems for patients. While various treatment approaches for congenitally missing teeth have been proposed, the replacement of a missing tooth with a dental implant offers specific advantages, such as preservation of the alveolar crest and elimination of the need to restore the adjacent teeth, over other options for tooth replacement. The aim of this article was to illustrate the surgical and prosthetic treatment with implants of a patient with primary teeth without permanent successors.

  15. Addressing Tooth Decay in Head Start Children

    Science.gov (United States)

    Knowlden, Adam P.; Hill, Lawrence F.; Alles-White, Monica L.; Cottrell, Randall R.

    2012-01-01

    Tooth decay is the most prevalent chronic disease of childhood. Oral health education and dental services are crucial to reducing the number of children afflicted with dental cavities. Due to limited access to preventative care, Head Start children are particularly vulnerable to tooth decay. This article outlines practical implications of a…

  16. Side effects of external tooth bleaching

    DEFF Research Database (Denmark)

    Bruzell, E.M.; Pallesen, Ulla; Thoresen, N.R.

    2013-01-01

    General practices and university clinics during the years 2007‑2009 in Scandinavia. Subjects Patients with tooth bleaching as part of the treatment plan. Results The prevalence of experienced tooth sensitivity at first follow-up was independent of bleaching procedure (at-home = 50.3% [n = 143]; in...

  17. Addressing Tooth Decay in Head Start Children

    Science.gov (United States)

    Knowlden, Adam P.; Hill, Lawrence F.; Alles-White, Monica L.; Cottrell, Randall R.

    2012-01-01

    Tooth decay is the most prevalent chronic disease of childhood. Oral health education and dental services are crucial to reducing the number of children afflicted with dental cavities. Due to limited access to preventative care, Head Start children are particularly vulnerable to tooth decay. This article outlines practical implications of a…

  18. [Replacing of residue from production of palm Palm Royal Australian (Archontophoenix alexan- drae) in silage of sugar cane in diets of sheep].

    Science.gov (United States)

    Bayão, Geraldo Fábio Viana; Queiroz, Augusto César de; Freitas, Samuel Galvão de; Batalha, Camila Delveaux Araujo; Sousa, Katiene Régia Silva; Pimentel, Róberson Machado; Cardoso, Lucas Ladeira; Cardoso, Alex Junio da Silva

    2014-12-01

    The aim of this study was to evaluate the chemical composition, voluntary intake and apparent digestibility of the diets containing residue from palm heart of Australian Royal Palm (Archontophoenix alexandrae) to replace sugar cane on sheep. Twelve sheep were used with average live weight of 23.3 ± 2.8 Kg and they placed in metabolism cages and distributed in six latin square 2 x 2 in a factorial design 3 x 2 (three types of residue--sheet, bark and composed--and two levels of residue's replacement, 5% and 15%). It was observed higher intake of dry matter (DM), organic matter (OM), nonfiber carbohydrates (NFC) by substitution of composed residue. The average values of apparent digestibility of DM, OM, crude protein (CP), neutral detergent fibre correct for ash and protein (NDFap) and total digestible nutrients (TDN) were higher for sheet residue. There was interaction between type of residue and level of residue's replacement on the urinary excretion of total nitrogen (NUE), apparent nitrogen balance (BNA) and microbial nitrogen compost (NMIC). Residues from palm heart of Australian Royal Palm can be used as roughage in the ruminants'diet, and of these residues, the sheet and composed residue showed better response in the evaluated characteristics.

  19. Biologically Based Restorative Management of Tooth Wear

    Directory of Open Access Journals (Sweden)

    Martin G. D. Kelleher

    2012-01-01

    Full Text Available The prevalence and severity of tooth wear is increasing in industrialised nations. Yet, there is no high-level evidence to support or refute any therapeutic intervention. In the absence of such evidence, many currently prevailing management strategies for tooth wear may be failing in their duty of care to first and foremost improve the oral health of patients with this disease. This paper promotes biologically sound approaches to the management of tooth wear on the basis of current best evidence of the aetiology and clinical features of this disease. The relative risks and benefits of the varying approaches to managing tooth wear are discussed with reference to long-term follow-up studies. Using reference to ethical standards such as “The Daughter Test”, this paper presents case reports of patients with moderate-to-severe levels of tooth wear managed in line with these biologically sound principles.

  20. Signaling Pathways Critical for Tooth Root Formation.

    Science.gov (United States)

    Wang, J; Feng, J Q

    2017-10-01

    Tooth is made of an enamel-covered crown and a cementum-covered root. Studies on crown dentin formation have been a major focus in tooth development for several decades. Interestingly, the population prevalence for genetic short root anomaly (SRA) with no apparent defects in crown is close to 1.3%. Furthermore, people with SRA itself are predisposed to root resorption during orthodontic treatment. The discovery of the unique role of Nfic (nuclear factor I C; a transcriptional factor) in controlling root but not crown dentin formation points to a new concept: tooth crown and root have different control mechanisms. Further genetic mechanism studies have identified more key molecules (including Osterix, β-catenin, and sonic hedgehog) that play a critical role in root formation. Extensive studies have also revealed the critical role of Hertwig's epithelial root sheath in tooth root formation. In addition, Wnt10a has recently been found to be linked to multirooted tooth furcation formation. These exciting findings not only fill the critical gaps in our understanding about tooth root formation but will aid future research regarding the identifying factors controlling tooth root size and the generation of a whole "bio-tooth" for therapeutic purposes. This review starts with human SRA and mainly focuses on recent progress on the roles of NFIC-dependent and NFIC-independent signaling pathways in tooth root formation. Finally, this review includes a list of the various Cre transgenic mouse lines used to achieve tooth root formation-related gene deletion or overexpression, as well as strengths and limitations of each line.

  1. Review of molar tooth structure research

    Directory of Open Access Journals (Sweden)

    Hong-Wei Kuang

    2014-10-01

    Full Text Available For more than a century, molar tooth structure (MTS has been studied. The study developed in three stages. During the first stage (before 1980, researchers described three basic morphologies of MTS, mainly from the Belt Supergroup in North America, and they provided several hypotheses for the origin of MTS. During the second stage (1980–1999, the frequent discoveries of MTS on all continents resulted in many detailed descriptions of their shape and in several hypotheses concerning the origin of MTS. Notably, hypotheses of MTS’s origin such as seismic activity and biological activity were developed. Since 2000, research has progressed into a new stage (the third stage. This is due to discoveries of MTS in the Meso–Neoproterozoic of China and elsewhere, and the ongoing debate on the seismic or biological origin is replaced by a hypothesis that involves gas expansion and chemically-controlled carbonate precipitation (both of them possibly affected by biological activities. This latter idea has gradually been commonly recognized as the mainstream theory. Despite continued disagreements, researchers now agree that microsparry calcite played a controlling role regarding the development and the global distribution of MTS in time and space during the Proterozoic, the morphological diversity, and the impact on the sedimentary environment. The present contribution analyses the three major hypotheses regarding the origin of MTS; it also discusses the shortcomings of the hypotheses regarding a seismic or biologic origin, and it details the modern hypothesis that links formation of cracks to the precipitation of sparry calcite. It is deduced that important questions dealing with the Precambrian can be answered, among other aspects regarding the depositional palaeogeography and stratigraphic correlations.

  2. A Case of Simultaneous Ectopic Tooth Extraction and Removal of Migrated Dental Implant from Maxillary Sinus.

    Science.gov (United States)

    Furuya, Yoshitaka; Norizuki, Yoshie; Yajima, Yasutomo

    2015-01-01

    When a dental implant migrates to the maxillary sinus it should be extracted immediately as it may cause sinusitis or further migrate to one of the other paranasal sinuses. Although usually detected due to symptoms such as nasal obstruction, nasal discharge, and nasal bleeding, an ectopic tooth in the maxillary sinus can sometimes be revealed incidentally on radiographic examination. Here, we report a case of simultaneous extraction of a dental implant that had migrated to the maxillary sinus and removal of an ectopic tooth that had arisen in the same location. The patient was a 73-year-old man who had received the implant to replace the first left maxillary molar at a local dental office. The implant had subsequently migrated to the left maxillary sinus and the patient was referred to us for its removal. On locating the implant on a CT scan at our hospital, an ectopic tooth was also observed at the base of the maxillary sinus. With patient consent, the decision was made to remove the ectopic tooth and extract the implant simultaneously. Excision of the lateral wall of the maxillary sinus allowed easy extraction of the implant. The ectopic tooth was removed by slightly expanding a fenestration in the sinus wall. Ectopic teeth in the maxillary sinus are sometimes put on follow-up if asymptomatic. Removal should be considered, however, if there is a risk of it becoming infected due to implantation-induced inflammation.

  3. Human Umbilical Cord Mesenchymal Stem Cells: A New Therapeutic Option for Tooth Regeneration.

    Science.gov (United States)

    Chen, Yuanwei; Yu, Yongchun; Chen, Lin; Ye, Lanfeng; Cui, Junhui; Sun, Quan; Li, Kaide; Li, Zhiyong; Liu, Lei

    2015-01-01

    Tooth regeneration is considered to be an optimistic approach to replace current treatments for tooth loss. It is important to determine the most suitable seed cells for tooth regeneration. Recently, human umbilical cord mesenchymal stem cells (hUCMSCs) have been regarded as a promising candidate for tissue regeneration. However, it has not been reported whether hUCMSCs can be employed in tooth regeneration. Here, we report that hUCMSCs can be induced into odontoblast-like cells in vitro and in vivo. Induced hUCMSCs expressed dentin-related proteins including dentin sialoprotein (DSP) and dentin matrix protein-1 (DMP-1), and their gene expression levels were similar to those in native pulp tissue cells. Moreover, DSP- and DMP-1-positive calcifications were observed after implantation of hUCMSCs in vivo. These findings reveal that hUCMSCs have an odontogenic differentiation potency to differentiate to odontoblast-like cells with characteristic deposition of dentin-like matrix in vivo. This study clearly demonstrates hUCMSCs as an alternative therapeutic cell source for tooth regeneration.

  4. Effects of carbonated soft drink consumption on orthodontic tooth movements in rats.

    Directory of Open Access Journals (Sweden)

    Hossein Agha Aghili

    2014-04-01

    Full Text Available The aim of this animal study was to evaluate the possible effects of Carbonated Soft Drink consumption on the rate of orthodontic tooth movement in rats.Thirty-six adult male Sprague-Dawley rats were randomly divided into two experimental groups and one control group. In the experimental groups (A&B, the water in the dietary regimen was replaced with soft drinks (Fanta® in group A and Cola® in group B two weeks before placement of orthodontic appliances. Then 5-mm nickel-titanium closed-coil springs were placed between the maxillary right first molars and first incisors under general anesthesia. This regimen continued for two weeks more and animals drank soft drink ad libitum. At the end of the experimental period, the rats were sacrificed, and interproximal tooth movements were measured.The mean amounts of tooth movement were 0.19mm in group A, 0.22mm in group B and 0.37mm in group C. Statistical analysis with analysis of variance (ANOVA test showed significant differences between all groups. The least movement occurred in group A that had received Fanta® drink.CSDs consumption decreases the rate of orthodontic tooth movement. The role of soft drinks in decreasing tooth movement might be related to its effects on bone metabolism.

  5. [The preventive effectiveness in reducing tooth decay and decalcification of different concentration of fluoride toothpaste for orthodontic patients].

    Science.gov (United States)

    Hua, Yong-Mei; Chen, Jie; Jean, Gong

    2006-04-01

    To investigate the preventive effectiveness in reducing tooth decay and decalcification of different concentration of fluoride toothpaste for orthodontic patients. 86 patients were divided into the first test group and the second test group. The patients of the first test group brushed tooth with 1.1% sodium fluoride and acidulated phosphate gel. The patients of the second test group brushed tooth with 0.243% sodium fluoride in a silica base. The extent of facial tooth decay and decalcification of the twelve upper and lower teeth from right cuspid to left cuspid was scored blindly and independently by four observers after 12 months of product use. The scores were rated either one (having tooth cavity/decalcification) or zero (no tooth cavity/decalcification). Four observer's readings were averaged per tooth, and then per patient for the two treatment groups. After 12 months of product use, the mean caries score of the first test group was 0.326, and the mean caries score of the second test group was 0.490. There was significant difference between them. A gel system containing 1.1% sodium fluoride and acidulated phosphate provides a clinically better efficacy in reducing tooth decay and decalcification than does a toothpaste containing 0.243% sodium fluoride in a silica base under and adjacent to orthodontic brackets used in orthodontic therapy.

  6. Aeronautical Information System Replacement -

    Data.gov (United States)

    Department of Transportation — Aeronautical Information System Replacement is a web-enabled, automation means for the collection and distribution of Service B messages, weather information, flight...

  7. Production of Recombinant β-Hexosaminidase A, a Potential Enzyme for Replacement Therapy for Tay-Sachs and Sandhoff Diseases, in the Methylotrophic Yeast Ogataea minuta▿

    OpenAIRE

    Akeboshi, Hiromi; Chiba, Yasunori; Kasahara, Yoshiko; Takashiba, Minako; Takaoka, Yuki; Ohsawa, Mai; Tajima, Youichi; Kawashima, Ikuo; Tsuji, Daisuke; Itoh, Kohji; Sakuraba, Hitoshi; Jigami, Yoshifumi

    2007-01-01

    Human β-hexosaminidase A (HexA) is a heterodimeric glycoprotein composed of α- and β-subunits that degrades GM2 gangliosides in lysosomes. GM2 gangliosidosis is a lysosomal storage disease in which an inherited deficiency of HexA causes the accumulation of GM2 gangliosides. In order to prepare a large amount of HexA for a treatment based on enzyme replacement therapy (ERT), recombinant HexA was produced in the methylotrophic yeast Ogataea minuta instead of in mammalian cells, which are common...

  8. Decoronation of an ankylosed tooth for preservation of alveolar bone prior to implant placement.

    Science.gov (United States)

    Filippi, A; Pohl, Y; von Arx, T

    2001-04-01

    A 12-year-old patient sustained avulsions of both permanent maxillary central incisors. Subsequently, both teeth developed replacement resorption. The left incisor was extracted alio loco. The right incisor was treated by decoronation (removal of crown and pulp, but preservation of the root substance). Comparison of both sites demonstrated complete preservation of the height and width of the alveolar bone at the decoronation site, whereas the tooth extraction site showed considerable bone loss. In addition, some vertical bone apposition was found on top of the decoronated root. Decoronation is a simple and safe surgical procedure for preservation of alveolar bone prior to implant placement. It must be considered as a treatment option for teeth affected by replacement resorption if tooth transplantation is not feasible.

  9. Jerarquización del Reemplazo de Equipos Productivos de Acuerdo a su Nivel de Cumplimiento de los Objetivos de la Empresa Hierarchical Structure of the Replacement of Productive Equipment according to the Fulfillment of the Company's Objectives

    Directory of Open Access Journals (Sweden)

    Fernando F Espinosa

    2011-01-01

    Full Text Available Se presenta la implementación computacional de un modelo de ayuda para el administrador del mantenimiento industrial, quien debe decidir sobre la jerarquización del reemplazo de equipos productivos. El sistema considera el nivel de cumplimiento de los requisitos de los nuevos productos que la empresa desea producir para satisfacer la evolución de estos en el mercado. El modelo jerarquiza el orden del reemplazo del equipo basado en su criticidad, grado de adaptabilidad a la evolución del producto y el costo de un equipo nuevo. Todos los antecedentes que son ingresados en las planillas de cálculo reflejan la apreciación que el equipo de mantenimiento tiene sobre su entorno. Los resultados son analizados y presentados gráficamente.In this paper the computational implementation of a model for the administrator of industrial maintenance, the person who must decide about the priority in which the productive equipments in a company should be replaced. The system takes into account the level of importance in the evolution of new products that the company wants to produce and to satisfy the ones already in the market. The program gives priority to the replacement of equipment based on its impact on productivity, the level of adaptability with the evolution of the product and the replacement cost of the new equipment. All of the data introduced on the spreadsheet reflect the appreciation that of the piece of equipment has on its surrounding. The results are analyzed and graphically presented.

  10. Tooth crown heights, tooth wear, sexual dimorphism and jaw growth in hominoids.

    Science.gov (United States)

    Dean, M C; Beynon, A D

    1991-01-01

    The aim of this review is to bring together data that link tooth morphology with tooth function and tooth growth: We aim to show how the microanatomy of hominoid teeth is providing evidence about rates of tooth growth that are likely to be a consequence of both masticatory strategy and social behaviour. First, we present data about incisor and molar tooth wear in wild short chimpanzees that demonstrate how crown heights are likely to be related to relative tooth use in a broad sense. Following this we review recent studies that describe the microanatomy of hominoid tooth enamel and show how these studies are providing evidence about tooth crown formation times in hominoids, as well as improving estimates for the age at death of certain juvenile fossil hominids. Next, we outline what is known about the mechanisms of tooth growth in the sexually dimorphic canine teeth of chimpanzees and compare these patterns of growth with tooth growth patterns in the canines of three fossil hominids from Laetoli, Tanzania. Finally, we discuss how selection pressures that operate to increase or reduce the size of anterior teeth interact with jaw size. We argue that the space available to grow developing teeth in the mandibles of juvenile hominoids is determined by the growth patterns of the mandibles, which in turn reflect masticatory strategy. The consequences of selection pressure to grow large or small anterior teeth are likely to be reflected in the times at which these teeth are able to emerge into occlusion.

  11. Tooth Retained Implant: No More an Oxymoron

    Directory of Open Access Journals (Sweden)

    Divya Bhat

    2011-03-01

    Full Text Available Introduction: Periodontally af-fected teeth are treated in one of the two ways. (1 Tooth retention after periodontal surgery, in which the degree of regeneration achieved is unpredictable. (2 Tooth extrac-tion and implant placement. Implants have an osseointegrated surface which does not provide adequate shock absorption. Regeneration can be achieved by resecting the crown of the affected tooth and submerging the root. This technique has not had a clinical application so far as the tooth becomes difficult to restore. Placing an implant within the root can make the retained root restorable. At the same time, as the implant is placed within the root surface it achieves a periodontal integration which dampens occlusal forces better than osseointegration. Therefore, such a “tooth retained implant” may serve as an additional treatment option with significant benefits over tooth retention and implant placement alone. The hypothesis: Implants placed within retained roots have shown cementum deposition and attachment of periodontal ligament fibers over their surface. This periodontal attachment may be able to dam-pen forces better than in an osseointegrated implant. Moreover, since an implant is being placed, the crown of the tooth can be resected and submerged. This prevents epithelial migration, allows for the periodontal ligament cells to populate the wound and favors regeneration.Evaluation of the hypothesis: The technique of placing implants within cavities prepared in the root and then submerging them are simple for any practitioner placing implants routinely.

  12. Tissue Interactions Regulating Tooth Development and Renewal.

    Science.gov (United States)

    Balic, Anamaria; Thesleff, Irma

    2015-01-01

    Reciprocal interactions between epithelial and mesenchymal tissues play a fundamental role in the morphogenesis of teeth and regulate all aspects of tooth development. Extensive studies on mouse tooth development over the past 25 years have uncovered the molecular details of the signaling networks mediating these interactions (reviewed by Jussila & Thesleff, 2012; Lan, Jia, & Jiang, 2014). Five conserved signaling pathways, namely, the Wnt, BMP, FGF, Shh, and Eda, are involved in the mediation of the successive reciprocal epithelial-mesenchymal cross talk which follows the general principle of morphogenetic interactions (Davidson, 1993). The pathways regulate the expression of transcription factors which confer the identity of dental epithelium and mesenchyme. The signals and transcription factors are integrated in complex signaling networks whose fine-tuning allows the generation of the variation in tooth morphologies. In this review, we describe the principles and molecular mechanisms of the epithelial-mesenchymal interactions regulating successive stages of tooth formation: (i) the initiation of tooth development, with special reference to the shift of tooth-forming potential from epithelium to mesenchyme; (ii) the morphogenesis of the tooth crown, focusing on the roles of epithelial signaling centers; (iii) the differentiation of odontoblasts and ameloblasts, which produce dentin and enamel, respectively; and (iv) the maintenance of dental stem cells, which support the continuous growth of teeth. © 2015 Elsevier Inc. All rights reserved.

  13. Spectroscopic investigations of carious tooth decay.

    Science.gov (United States)

    Thareja, R K; Sharma, A K; Shukla, Shobha

    2008-11-01

    We report on the elemental composition of healthy and infected part of human tooth using laser induced breakdown spectroscopy (LIBS). We have used prominent constituent transitions in laser-excited tooth to diagnose the state of the tooth. A nanosecond laser pulse (355nm, 5ns) was used as an ablating pulse and the sodium (3s2S-3p2P) at 588.99 and (3s2S-3p2P) at 589.99nm, strontium (5s21S-1s5P) at 460.55nm, and calcium (3d3D-4f 3F0) at 452.55nm transitions for spectroscopic analysis. The spectroscopic observations in conjunction with discriminate analysis showed that calcium attached to the hydroxyapatite structure of the tooth was affected severely at the infected part of the tooth. The position-time plots generated from two-dimensional (2D) images conclusively showed a decrease in calcium concentration in the infected region of the irradiated tooth. Using the technique, we could distinguish between the healthy and carious parts of the tooth with significant accuracy.

  14. Radiation Source Replacement Workshop

    Energy Technology Data Exchange (ETDEWEB)

    Griffin, Jeffrey W.; Moran, Traci L.; Bond, Leonard J.

    2010-12-01

    This report summarizes a Radiation Source Replacement Workshop in Houston Texas on October 27-28, 2010, which provided a forum for industry and researchers to exchange information and to discuss the issues relating to replacement of AmBe, and potentially other isotope sources used in well logging.

  15. TOOTH CONTACT ANALYSIS OF CONICAL INVOLUTE GEARS

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    The mathematical model of conical involute gears is developed based on the theory of gearing and the generating mechanism. Tooth contact analysis (TCA) is performed to examine the meshing and bearing contact of the conical involute gear pairs with intersected and crossed axes. In addition, the principal directions and curvatures of the gear surfaces are investigated and the contact ellipses of the mating tooth surfaces are also studied. Finally, the numerical illustrative examples are provided to demonstrate the computational results, test gears are made for tooth-bearing tests, and the conclusion is verified that the theory has the applicability.

  16. Doctor Referral of Overweight People to a Low-Energy Treatment (DROPLET) in primary care using total diet replacement products: a protocol for a randomised controlled trial.

    Science.gov (United States)

    Jebb, Susan A; Astbury, Nerys M; Tearne, Sarah; Nickless, Alecia; Aveyard, Paul

    2017-08-04

    The global prevalence of obesity has risen significantly in recent decades. There is a pressing need to identify effective interventions to treat established obesity that can be delivered at scale. The aim of the Doctor Referral of Overweight People to a Low-Energy Treatment (DROPLET) study is to determine the clinical effectiveness, feasibility and acceptability of referral to a low-energy total diet replacement programme compared with usual weight management interventions in primary care. The DROPLET trial is a randomised controlled trial comparing a low-energy total diet replacement programme with usual weight management interventions delivered in primary care. Eligible patients will be recruited through primary care registers and randomised to receive a behavioural support programme delivered by their practice nurse or a referral to a commercial provider offering an initial 810 kcal/d low-energy total diet replacement programme for 8 weeks, followed by gradual food reintroduction, along with weekly behavioural support for 24 weeks. The primary outcome is weight change at 12 months. The secondary outcomes are weight change at 3 and 6 months, the proportion of participants achieving 5% and 10% weight loss at 12 months, and change in fat mass, haemoglobin A1c, low-density lipoprotein cholesterol and systolic and diastolic blood pressure at 12 months. Data will be analysed on the basis of intention to treat. Qualitative interviews on a subsample of patients and healthcare providers will assess their experiences of the weight loss programmes and identify factors affecting acceptability and adherence. This study has been reviewed and approved by the National Health ServiceHealth Research Authority (HRA)Research Ethics Committee (Ref: SC/15/0337). The trial findings will be disseminated to academic and health professionals through presentations at meetings and peer-reviewed journals and to the public through the media. If the intervention is effective, the results

  17. Regenerative Applications Using Tooth Derived Stem Cells in Other Than Tooth Regeneration: A Literature Review.

    Science.gov (United States)

    Park, Yun-Jong; Cha, Seunghee; Park, Young-Seok

    2016-01-01

    Tooth derived stem cells or dental stem cells are categorized according to the location from which they are isolated and represent a promising source of cells for regenerative medicine. Originally, as one kind of mesenchymal stem cells, they are considered an alternative of bone marrow stromal cells. They share many commonalties but maintain differences. Considering their original function in development and the homeostasis of tooth structures, many applications of these cells in dentistry have aimed at tooth structure regeneration; however, the application in other than tooth structures has been attempted extensively. The availability from discarded or removed teeth can be an innate benefit as a source of autologous cells. Their origin from the neural crest results in exploitation of neurological and numerous other applications. This review briefly highlights current and future perspectives of the regenerative applications of tooth derived stem cells in areas beyond tooth regeneration.

  18. 羔羊代乳粉在新疆肉羊生产中的应用前景%Application Prospect of Lamb Milk Replacer on Xinjiang Mutton Sheep Production

    Institute of Scientific and Technical Information of China (English)

    郭同军; 侯广田; 刘伟; 路远; 杨秀荣

    2012-01-01

    The lamb milk replacer is signality in early weaned lambs and lamb industrial production. The current situation that the mutton are imbalance between supply and demand,and prices are too high in Xinjiang. Using the lamb milk replacer in the lamb industry production.developing high-quality lamb meat and fat lamb production,constructing intensive,scale and industrialization of the sheep industry,what is an effective way to resolve this contradiction.%羔羊代乳粉在羔羊早期断奶和肉羊产业化生产中起着重要的作用.在新疆当前羊肉供需不平衡,羊肉价格过高的情况下,在肉羊产业中使用羔羊代乳粉,发展肥羔肉和优质小羊肉生产,建设集约化、规模化、产业化的养羊业,是解决这种矛盾的有效途径之一.

  19. Tooth resorption in cats: contribution of vitamin D and inflammation

    NARCIS (Netherlands)

    Vrieling, H.E.

    2010-01-01

    Tooth resorption in cats Tooth resorption affecting several teeth is a painful disease with a prevalence of up to 75% in household cats and is often accompanied by periodontitis. Tooth resorption is caused by an increased number and activity of tooth-resorbing odontoclasts, cells that share function

  20. Fly and bottom ashes from biomass combustion as cement replacing components in mortars production: rheological behaviour of the pastes and materials compression strength.

    Science.gov (United States)

    Maschio, Stefano; Tonello, Gabriele; Piani, Luciano; Furlani, Erika

    2011-10-01

    In the present research mortar pastes obtained by replacing a commercial cement with the equivalent mass of 5, 10, 20 and 30 wt.% of fly ash or bottom ash from fir chips combustion, were prepared and rheologically characterized. It was observed that the presence of ash modifies their rheological behaviour with respect to the reference blend due to the presence, in the ashes, of KCl and K2SO4 which cause precipitation of gypsum and portlandite during the first hydration stages of the pastes. Hydrated materials containing 5 wt.% of ash display compression strength and absorption at 28 d of same magnitude as the reference composition; conversely, progressive increase of ash cause a continuous decline of materials performances. Conversely, samples tested after 180 d display a marked decline of compression strength, as a consequence of potassium elution and consequent alkali-silica reaction against materials under curing.

  1. NifU and NifS are required for the maturation of nitrogenase and cannot replace the function of isc-gene products in Azotobacter vinelandii.

    Science.gov (United States)

    Johnson, D C; Dos Santos, P C; Dean, D R

    2005-02-01

    In recent years, it has become evident that [Fe-S] proteins, such as hydrogenase, nitrogenase and aconitase, require a complex machinery to assemble and insert their associated [Fe-S] clusters. So far, three different types of [Fe-S] cluster biosynthetic systems have been identified and these have been designated nif, isc and suf. In the present work, we show that the nif-specific [Fe-S] cluster biosynthetic system from Azotobacter vinelandii, which is required for nitrogenase maturation, cannot functionally replace the isc [Fe-S] cluster system used for the maturation of other [Fe-S] proteins, such as aconitase. The results indicate that, in certain cases, [Fe-S] cluster biosynthetic machineries have evolved to perform only specialized functions.

  2. Relations of hedonic hunger and behavioral change to weight loss among adults in a behavioral weight loss program utilizing meal-replacement products.

    Science.gov (United States)

    Theim, Kelly R; Brown, Joshua D; Juarascio, Adrienne S; Malcolm, Robert R; O'Neil, Patrick M

    2013-11-01

    Greater self-regulatory behavior usage is associated with greater weight loss within behavioral weight loss treatments. Hedonic hunger (i.e., susceptibility to environmental food cues) may impede successful behavior change and weight loss. Adult men and women (N = 111, body mass index M ± SD = 35.89 ± 6.97 kg/m(2)) were assessed before and after a 15-week lifestyle change weight loss program with a partial meal-replacement diet. From pre- to post-treatment, reported weight control behavior usage improved and hedonic hunger decreased, and these changes were inversely related. Individuals with higher hedonic hunger scores at baseline showed the greatest weight loss. Similarly, participants with lower baseline use of weight control behaviors lost more weight, and increased weight control behavior usage was associated with greater weight loss-particularly among individuals with low baseline hedonic hunger. Further study is warranted regarding the significance of hedonic hunger in weight loss treatments.

  3. Effects of group-size-floor space allowance during the nursery phase of production on growth, physiology, and hematology in replacement gilts.

    Science.gov (United States)

    Callahan, S R; Cross, A J; DeDecker, A E; Lindemann, M D; Estienne, M J

    2017-01-01

    The objective was to determine effects of nursery group-size-floor space allowance on growth, physiology, and hematology of replacement gilts. A 3 × 3 factorial arrangement of treatments was used wherein gilts classified as large, medium, or small ( = 2537; BW = 5.6 ± 0.6 kg) from 13 groups of weaned pigs were placed in pens of 14, 11, or 8 pigs resulting in floor space allowances of 0.15, 0.19, or 0.27 m/pig, respectively. Pigs were weighed on d 0 (weaning) and d 46 (exit from nursery). The ADG was affected by group-size-floor space allowance × pig size ( = 0.04). Large- and medium-size gilts allowed the most floor space had greater ( floor space but for small size gilts there was no effect ( > 0.05) of group size-floor space allowance. Mortality in the nursery was not affected ( > 0.05) by treatment, size, or treatment × size and overall was approximately 2.1%. Complete blood counts and blood chemistry analyses were performed on samples collected at d 6 and 43 from a subsample of gilts ( = 18/group-size-floor space allowance) within a single group. The concentration ( blood cell distribution width the greatest ( floor space (effects of treatment). Blood calcium was affected by treatment ( = 0.02) and concentrations for gilts allowed the greatest and intermediate amounts of floor space were greater ( floor space. Serum concentrations of cortisol were not affected by treatment × day ( = 0.27). Cortisol concentrations increased from d 6 to d 43 in all groups and were affected by day ( blood parameters and resulted in large- and medium-size replacement gilts displaying increased ADG. Further study will determine if these effects influence lifetime reproductive capacity and sow longevity.

  4. Impacted supernumerary tooth in coronoid process: a case report

    Energy Technology Data Exchange (ETDEWEB)

    Park, Won Se; Lee, Je Ho; Park, Hyok; Jung, Ho Gul; Kim, Kee Deog [Yonsei University College of Dentistry, Seoul (Korea, Republic of)

    2010-06-15

    Impaction of tooth is a situation in which an unerupted tooth is wedged against another tooth or teeth or otherwise located so that it cannot erupt normally. The supernumerary tooth is also called as hyperdontia and defined as the condition of having additional tooth to the regular number of teeth. The most common supernumerary tooth is a mesiodens, which is a mal-formed, peg-like tooth that occurs between the maxillary incisors. The supernumerary tooth is commonly impacted but they are frequently impacted on maxilla. Ectopic impaction of supernumerary tooth on mandibular condyle, coronoid process, ascending ramus, and pterygomandibular space is very rare condition. In this case, we report a case of impacted supernumerary tooth on mandibular sigmoid notch without definite pathologic change.

  5. Critical appraisal. In-office tooth whitening: pulpal effects and tooth sensitivity issues.

    Science.gov (United States)

    Kwon, So Ran; Swift, Edward J

    2014-01-01

    In-office bleaching is an effective method for whitening teeth.Tooth sensitivity associated with in-office whitening is reversible and may range from mild to considerable. The incidence and severity of tooth sensitivity can be reduced by pretreatment with a desensitizer such as potassium nitrate. Histologic studies and clinical studies on long-term pulpal effects are lacking to definitively support the safety of in-office tooth whitening. Future studies on the etiology of tooth sensitivity related to whitening might greatly improve the means of preventing and managing this side effect.

  6. The tooth, the whole tooth and nothing but the tooth: tooth shape and ontogenetic shift dynamics in the white shark Carcharodon carcharias.

    Science.gov (United States)

    French, G C A; Stürup, M; Rizzuto, S; van Wyk, J H; Edwards, D; Dolan, R W; Wintner, S P; Towner, A V; Hughes, W O H

    2017-10-01

    Results from this study of the white shark Carcharodon carcharias include measurements obtained using a novel photographic method that reveal significant differences between the sexes in the relationship between tooth cuspidity and shark total length, and a novel ontogenetic change in male tooth shape. Males exhibit broader upper first teeth and increased distal inclination of upper third teeth with increasing length, while females do not present a consistent morphological change. Substantial individual variation, with implications for pace of life syndrome, was present in males and tooth polymorphism was suggested in females. Sexual differences and individual variation may play major roles in ontogenetic changes in tooth morphology in C. carcharias, with potential implications for their foraging biology. Such individual and sexual differences should be included in studies of ontogenetic shift dynamics in other species and systems. © 2017 The Fisheries Society of the British Isles.

  7. Materials science: Lessons from tooth enamel

    Science.gov (United States)

    Espinosa, Horacio D.; Soler-Crespo, Rafael

    2017-03-01

    A remarkable composite material has been made that mimics the structure of tooth enamel. This achievement opens up the exploration of new composite materials and of computational methods that reliably predict their properties. See Letter p.95

  8. Genetics And Tooth Anomalies - An Update

    Directory of Open Access Journals (Sweden)

    Aswathy Brahmanandan

    2013-01-01

    Full Text Available Tooth development like the development of all epithelial appendages is regulated by inductive tissue interactions between epithelium and mesenchyme. Numerous genes interact, either act in conjunction or antagonize each other in odontogenesis. A number of different mesenchymal molecules and their receptors act as mediators in epithelial mesenchymal interactions. Several genes linked with early tooth positioning and developments belong to signaling pathways and have morphogenesis regulatory functions in morphogenesis of other organs. Their mutations often show pleiotropic effects beyond dental morphogenesis. In contrast, certain genes involved in enamel and dentin structures are highly specific for tooth. Mutations in these genes have been identified as causes of Amelogenesis Imperfecta (AI, Dentinogenesis Imperfecta (DI, Dentin Dysplasia (DD and anomalies in tooth number. This article focuses on genetic basis of inherited non-syndromic teeth disorders.

  9. Charcot-Marie-Tooth and Related Diseases

    Science.gov (United States)

    ... of France, and Howard Henry Tooth of the United Kingdom. Although most people have never heard of CMT, ... CMT provided by patients and families. (See http://neurology.med. wayne.edu/neurogenetics/na_database. php.) MDA ...

  10. Life of a Tooth: A Visual Timeline

    Medline Plus

    Full Text Available ... Dentist Your Family's Oral Health About the AGD Dental care and oral health information you need from ... Child First See a Dentist? The History of Dental Advances Check Menstrual Calendar for Tooth Extraction Temporomandibular ...

  11. [Biological basis of orthodontic tooth movement].

    Science.gov (United States)

    Maltha, J C; van Leeuwen, E J

    2000-04-01

    The effect of orthodontic therapy is dependent of the biological possibilities and limitations of the dento-alveolar complex. Biomechanical effects determine the first phase of tooth movement. In the second phase hyalinisation occurs in almost all cases. Elimination of the hyalinised tissue is associated with undermining bone resorption. Next, 'real' tooth movement starts. At the pressure side the normal structure of the periodontal ligament is destroyed and so is the tooth attachment. At the tension side deposition of trabecular bone is found and the tooth attachment remains. The regulation of these processes is still not completely understood, but cytokines and growth factors play an important role. The biological system does not react according to a simple dose-response relation and large individual differences in susceptibility of the system exist.

  12. [Pathology of Charcot-Marie-Tooth Disease].

    Science.gov (United States)

    Oka, Nobuyuki

    2016-01-01

    Although genetic testing is available, nerve biopsy is useful in selected patients for the diagnosis of Charcot-Marie-Tooth disease (CMT). These are sporadic cases of hereditary neuropathy, or familial cases in which genetic testing is negative. CMT is caused by mutations of various genes. The pathological features of CMT have mostly been investigated using nerve biopsy, which may shed light on the presumed functions of mutated gene products. PMP22 duplication in CMT1A induces numerous large onion bulb lesions (OB). Compared to chronic inflammatory demyelinating polyradiculoneuropathy, the differential features of CMT1A are patchy distribution of OB and non-inflammatory lesions. CMT1B also manifests as OB, but presents abnormal compaction of myelin sheaths caused by uncompacted myelin or excessive myelin folding. CMT2 includes axonal neuropathies and many causative genes have been found. CMT2A (MFN2 mutation) shows abnormal mitochondria with a spherical morphology instead of tubular in the longitudinal direction. CMT4 consists of autosomal recessive forms with demyelinating pathology. Most subtypes have mutations of genes relating to myelin maintenance, and pathologically, they show abnormal folding of the myelin structure.

  13. Unicuspid and bicuspid tooth crown formation in squamates.

    Science.gov (United States)

    Handrigan, Gregory R; Richman, Joy M

    2011-12-15

    The molecular and developmental factors that regulate tooth morphogenesis in nonmammalian species, such as snakes and lizards, have received relatively little attention compared to mammals. Here we describe the development of unicuspid and bicuspid teeth in squamate species. The simple, cone-shaped tooth crown of the bearded dragon and ball python is established at cap stage and fixed in shape by the differentiation of cells and the secretion of dental matrices. Enamel production, as demonstrated by amelogenin expression, occurs relatively earlier in squamate teeth than in mouse molars. We suggest that the early differentiation in squamate unicuspid teeth at cap stage correlates with a more rudimentary tooth crown shape. The leopard gecko can form a bicuspid tooth crown despite the early onset of differentiation. Cusp formation in the gecko does not occur by the folding of the inner enamel epithelium, as in the mouse molar, but by the differential secretion of enamel. Ameloblasts forming the enamel epithelial bulge, a central swelling of cells in the inner enamel epithelium, secrete amelogenin at cap stage, but cease to do so by bell stage. Meanwhile, other ameloblasts in the inner enamel epithelium continue to secrete enamel, forming cusp tips on either side of the bulge. Bulge cells specifically express the gene Bmp2, which we suggest serves as a pro-differentiation signal for cells of the gecko enamel organ. In this regard, the enamel epithelial bulge of the gecko may be more functionally analogous to the secondary enamel knot of mammals than the primary enamel knot. Copyright © 2011 Wiley Periodicals, Inc., A Wiley Company.

  14. Determination of tooth clearances at trochoidal pump

    OpenAIRE

    Ivanović, Lozica T.; Erić, Milan D.; Stojanović, Blaža Ž.; id_orcid 0000-0003-4790-2856; Ilić, Andreja B.

    2011-01-01

    The paper describes the development of a mathematical model of trochoidal gearing with clearances. Gearing of a trochoidal pump's gear set with an outer gear having one gear tooth more than an inner gear is analyzed. The inner gear tooth profile is described by peritrochoidal equidistance and the outer gear profile by a circular arc. Upon the basic principles of ideal profile generation, a mathematical model of gearing with clearances is developed. Using an analytical model, the calculation o...

  15. Computer simulation of gear tooth manufacturing processes

    Science.gov (United States)

    Mavriplis, Dimitri; Huston, Ronald L.

    1990-01-01

    The use of computer graphics to simulate gear tooth manufacturing procedures is discussed. An analytical basis for the simulation is established for spur gears. The simulation itself, however, is developed not only for spur gears, but for straight bevel gears as well. The applications of the developed procedure extend from the development of finite element models of heretofore intractable geometrical forms, to exploring the fabrication of nonstandard tooth forms.

  16. Tooth enamel and enameloid in actinopterygian fish

    Institute of Scientific and Technical Information of China (English)

    I.SASAGAWA; M.ISHIYAMA; H.YOKOSUKA; M.MIKAMI; T.UCHIDA

    2009-01-01

    The morphological features of tooth enamel and enameloid in actinopterygian fish are reviewed to provide basic data concerning the biomineralization of teeth in lower vertebrates. Enameloid, which covers the tooth surface, is a unique well-mineralized tissue and usually has the same functions as mammalian tooth enamel. However, the development of enameloi is different from that of the enamel produced by dental epithelial cells. Enameloid is made by a combination of odontoblasts and dental epithelial cells. An organic matrix that contains collagen is provided by odontoblasts, and then dental epithelial cells dissolve the degenerate matrix and suooly inorganic ions during advanced crystal growth in enameloid. It is likely that enameloid is a good model for studying the growth of well-mineralized hard tissues in vertebrates. Some actinopterygian fish possess a collar enamel layer that is situated at the surface of the tooth shaft, indicating that the origin of tooth enamel is found in fish. Collar enamel is thought to be a precursor of mammalian enamel, although it is thin and not well mineralized in comparison with enameloid. In Lepisosteus and Polypterus, both of which are living actinopterygians,both enameloid and enamel are found in the same tooth. Therefore, they ace suitable materials for examining the developmental processes of enameloid and enamel and the relationship among them.

  17. Cracked tooth syndrome: Overview of literature.

    Science.gov (United States)

    Hasan, Shamimul; Singh, Kuldeep; Salati, Naseer

    2015-01-01

    Pain is defined as an "unpleasant sensory and emotional feeling which is associated with actual or potential injury of tissue or expressed in terms of such injury." Tooth pain usually refers to pain around the teeth or jaws mainly as a result of a dental condition. Mostly, toothaches are caused by a carious cavity, a broken tooth, an exposed tooth root or gum disease. The toothache may sometimes be the result of radiating pain from structures in the vicinity of tooth and jaws (cardiac pain, ear, nose, throat pain, and sinusitis). Therefore, evaluation by both dentists and physicians are sometimes necessary to diagnose medical illnesses causing "toothache." Cracked tooth syndrome is a major diagnostic challenge in clinical practice. Accurate diagnosis and appropriate treatment are complicated due to lack of awareness of this condition and its bizarre clinical features. Early diagnosis has been linked with successful restorative management and good prognosis. This article provides a detailed literature on the causes, classification, signs and symptoms, diagnosis, and treatment planning of cracked tooth syndrome.

  18. Frictional Effects on Gear Tooth Contact Analysis

    Directory of Open Access Journals (Sweden)

    Zheng Li

    2013-01-01

    Full Text Available The present paper concentrates on the investigations regarding the situations of frictional shear stress of gear teeth and the relevant frictional effects on bending stresses and transmission error in gear meshing. Sliding friction is one of the major reasons causing gear failure and vibration; the adequate consideration of frictional effects is essential for understanding gear contact behavior accurately. An analysis of tooth frictional effect on gear performance in spur gear is presented using finite element method. Nonlinear finite element model for gear tooth contact with rolling/sliding is then developed. The contact zones for multiple tooth pairs are identified and the associated integration situation is derived. The illustrated bending stress and transmission error results with static and dynamic boundary conditions indicate the significant effects due to the sliding friction between the surfaces of contacted gear teeth, and the friction effect can not be ignored. To understand the particular static and dynamic frictional effects on gear tooth contact analysis, some significant phenomena of gained results will also be discussed. The potentially significant contribution of tooth frictional shear stress is presented, particularly in the case of gear tooth contact analysis with both static and dynamic boundary conditions.

  19. Design of face-hobbed spiral bevel gears with reduced maximum tooth contact pressure and transmission errors

    Institute of Scientific and Technical Information of China (English)

    Vilmos Simon

    2013-01-01

    The aim of this study is to define optimal tooth modifications,introduced by appropriately chosen head-cutter geometry and machine tool setting,to simultaneously minimize tooth contact pressure and angular displacement error of the driven gear (transmission error) of face-hobbed spiral bevel gears.As a result of these modifications,the gear pair becomes mismatched,and a point contact replaces the theoretical line contact.In the applied loaded tooth contact analysis it is assumed that the point contact under load is spreading over a surface along the whole or part of the “potential” contact line.A computer program was developed to implement the formulation provided above.By using this program the influence of tooth modifications introduced by the variation in machine tool settings and in head cutter data on load and pressure distributions,transmission errors,and fillet stresses is investigated and discussed.The correlation between the ease-off obtained by pinion tooth modifications and the corresponding tooth contact pressure distribution is investigated and the obtained results are presented.

  20. Hormone Replacement Therapy

    Science.gov (United States)

    ... before and during menopause, the levels of female hormones can go up and down. This can cause ... hot flashes and vaginal dryness. Some women take hormone replacement therapy (HRT), also called menopausal hormone therapy, ...

  1. Knee joint replacement

    Science.gov (United States)

    ... of your kneecap. Your kneecap is called the patella. The replacement part is usually made from a ... long. Then your surgeon will: Move your kneecap (patella) out of the way, then cut the ends ...

  2. Knee joint replacement - slideshow

    Science.gov (United States)

    ... this page: //medlineplus.gov/ency/presentations/100088.htm Knee joint replacement - series—Normal anatomy To use the ... to slide 4 out of 4 Overview The knee is a complex joint. It contains the distal ...

  3. Evaluation of red mud as pozzolanic material in replacement of cement for production of mortars; Avaliacao da lama vermelha como material pozolanico em substituicao ao cimento para producao de argamassas

    Energy Technology Data Exchange (ETDEWEB)

    Manfroi, E.P.; Cheriaf, M.; Rocha, J.C., E-mail: elizmanfroi@yahoo.com.b, E-mail: malik@valores.ufsc.b [Universidade Federal de Santa Catarina (UFSC), Florianopolis, SC (Brazil). Dept. de Engenharia Civil

    2010-07-01

    Red mud is a by-product of the alkaline extraction of aluminum from the bauxite and represents a renewed environmental problem due the significant annual throughput by the plants. In the present work, the pozzolanic properties of Brazilian red mud fired at 600, 700, 800 and 900 deg C were investigated by monitoring lime consumption using DTA analysis and Brazilian standard methodology NBR 5772 (1992). Products and kinetics of hydration were determined in cement pastes produced with 5 and 15% red mud using x-ray diffraction and DTA analysis. Compressive strength and capillary absorption tests were realized on mortars constituted by 5, 10 and 15% red mud in replacement of cement. When calcined at 600 deg C, the red mud develops good pozzolanic properties, and the compressive strength of mortars produced with this waste meet values in accordance with regulatory standard. These results shown than red mud can be used, in partial replacement of cement, as new construction material to produce sustainable mortars with low environmental impact. (author)

  4. EFSA NDA Panel (EFSA Panel on Dietetic Products, Nutrition and Allergies), 2014 . Scientific Opinion on the substantiation of a health claim related to vitamin D and contribution to normal bone and tooth development pursuant to Article 14 of Regulation (EC) No 1924/2006

    DEFF Research Database (Denmark)

    Tetens, Inge

    Following an application from Specialised Nutrition Europe (formerly IDACE), submitted pursuant to Article 14 of Regulation (EC) No 1924/2006 via the Competent Authority of France, the EFSA Panel on Dietetic Products, Nutrition and Allergies (NDA) was asked to deliver an opinion on the scientific...... for infants and young children. A claim on vitamin D and maintenance of normal bones and teeth in the general population has already been assessed with a favourable outcome. The Panel considers that the role of vitamin D in bone and tooth mineralisation and homeostasis applies to all ages, including infants...... and young children (from birth to three years). The Panel concludes that a cause and effect relationship has been established between the dietary intake of vitamin D and contribution to normal development of bones and teeth....

  5. EFSA Panel on Dietetic Products, Nutrition and Allergies (NDA); Scientific Opinion on the substantiation of health claims related to Lactobacillus rhamnosus ATCC 53103 (LGG) and “gastro-intestinal health” (ID 906) and maintenance of tooth mineralisation (ID 3018) pursuant to Article 13

    DEFF Research Database (Denmark)

    Tetens, Inge

    Following a request from the European Commission, the Panel on Dietetic Products, Nutrition and Allergies was asked to provide a scientific opinion on a list of health claims pursuant to Article 13 of Regulation (EC) No 1924/2006. This opinion addresses the scientific substantiation of health...... claims in relation to Lactobacillus rhamnosus ATCC 53103 (LGG) and “gastrointestinal health” and maintenance of tooth mineralisation. The scientific substantiation is based on the information provided by the Member States in the consolidated list of Article 13 health claims and references that EFSA has...... received from Member States or directly from stakeholders. The food constituent that is the subject of the health claims is L. rhamnosus ATCC 53103 (LGG). The Panel considers that L. rhamnosus ATCC 53103 (LGG) is sufficiently characterised....

  6. EFSA Panel on Dietetic Products, Nutrition and Allergies (NDA); Scientific Opinion on the substantiation of health claims related to sugar-free chewing gum with calcium phosphoryl oligosaccharides and maintenance of tooth mineralisation (ID 337) pursuant to Article 13(1) of Regulation (EC) No 1924/2006

    DEFF Research Database (Denmark)

    Tetens, Inge

    Following a request from the European Commission, the Panel on Dietetic Products, Nutrition and Allergies was asked to provide a scientific opinion on a list of health claims pursuant to Article 13 of Regulation (EC) No 1924/2006. This opinion addresses the scientific substantiation of health...... claims in relation to sugar-free chewing gum with calcium phosphoryl oligosaccharides and maintenance of tooth mineralisation. The scientific substantiation is based on the information provided by the Member States in the consolidated list of Article 13 health claims and references that EFSA has received...... from Member States or directly from stakeholders. The food constituent that is the subject of the health claim is calcium phosphoryl oligosaccharides. In the context of the references provided, the Panel assumes that the food, which is the subject of the health claim is sugar-free chewing gum...

  7. 14 CFR 21.9 - Replacement and modification articles.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Replacement and modification articles. 21.9... CERTIFICATION PROCEDURES FOR PRODUCTS AND PARTS General § 21.9 Replacement and modification articles. (a) If a person knows, or should know, that a replacement or modification article is reasonably likely to...

  8. CHARCOT-MARIE-TOOTH DISEASE

    Directory of Open Access Journals (Sweden)

    Lea Leonardis

    2003-09-01

    Full Text Available Background. Charcot-Marie-Tooth (CMT disease is a common inherited disorder of the peripheral nervous system. In our paper, different types of CMT are described with their typical clinical pictures, electrophysiological signs and molecular genetic studies. CMT is classified as demyelinative and axonal type and distal motor neuronopathy.Conclusions. CMT can be of autosomal dominant, recessive and X-linked inheritance. The most frequent form of CMT is the result of the dominantly inherited duplication of chromosome 17p11.2 and is marked as CMT1A. The same group involves also rare patients with point mutation in the peripheral myelin protein-22 gene. CMT1B is associated with point mutations in protein zero gene. CMT1C is linked to chromosome 16p13.1–12.3. Patients with point mutations in early growth response 2 gene (EGR2 are included in group CMT1D. The disease can be also inhereted X-linked (CMTX with the mutations in connexin-32 gene. In autosomal recessive inherited demyelinating polyneuropathies (CMT4, mutations are found in the myotubularin-related protein-2 (CMT4B, N-myc downstream-regulated gene 1 (CMT4D, EGR2 (CMT4E, and in the periaksin (CMT4F genes. In axonal inherited neuropathy, mutations are found in KIF1beta (CMT2A and in light neurofilament (CMT2E genes, other forms map to different chromosomal loci (CMT2B, CMT2D, CMT2F. Some suggestions for the diagnostic procedures of patients with CMT are given.

  9. Tooth by tooth survival analysis of dental health in girls with epilepsy.

    Science.gov (United States)

    Rajavaara, P; Vainionpää, L; Rättyä, J; Knip, M; Pakarinen, A; Isojärvi, J; Larmas, M

    2003-06-01

    The aim of this study was to analyse, tooth by tooth, the timing of caries attacks leading to dental restoration in girls with epilepsy. The series comprised 60 girls with epilepsy, 8-18 years old, treated in the Departments of Paediatrics or Neurology of the Oulu University Hospital. A group of healthy age matched girls served as control. A tooth by tooth survival analysis of the time between tooth eruption and caries attacks to a stage leading to the restorations of the permanent teeth was conducted retrospectively using data from the dental health records with annual examinations. The rate of dental restorations placed due to caries was constantly higher in the girls with epilepsy than in their controls. The difference was significant between the first molars (p=epilepsy, the antiepileptic medication in particular, might increase the risk of caries.

  10. Tooth regeneration from newly established cell lines from a molar tooth germ epithelium.

    Science.gov (United States)

    Komine, Akihiko; Suenaga, Momoko; Nakao, Kazuhisa; Tsuji, Takashi; Tomooka, Yasuhiro

    2007-04-13

    In order to investigate tooth development, several cell lines of the dental epithelium and ectomesenchyme have been established. However, no attempt has been reported to regenerate teeth with cell lines. Here, we have established several clonal cell lines of the dental epithelium from a p53-deficient fetal mouse. They expressed specific markers of the dental epithelium such as ameloblastin and amelogenin. A new method has been developed to bioengineer tooth germs with dental epithelial and mesenchymal cells. Reconstructed tooth germs with cell lines and fetal mesenchymal cells were implanted under kidney capsule. The germs regenerated teeth with well-calcified structures as seen in natural tooth. Germs without the cell lines developed bone. This is the first success to regenerate teeth with dental epithelial cell lines. They are useful models in vitro for investigation of mechanisms in morphogenesis and of cell lineage in differentiation, and for clinical application for tooth regeneration.

  11. Manufacture of Toothed Elements in Nanoausferritic Ductile Iron

    Directory of Open Access Journals (Sweden)

    Myszka D.

    2014-10-01

    Full Text Available The technology currently used for the fabrication of toothed wheels, gear couplings and chain drums involves the induction hardening process or hardening and tempering after carburising. All these processes take a long time and cause adverse changes in the dimensions and surface quality of products, requiring post-treatment machining to remove the resulting cavities. The paper proposes the implementation of gear elements made of ductile iron with nanoausferritic matrix obtained by a new appropriate heat treatment process. The new material offers good performance characteristics and nearly no need for the application of other technological processes commonly used in the manufacture of gears.

  12. Tooth tissue engineering: tooth decellularization for natural scaffold

    Science.gov (United States)

    de Sousa Iwamoto, Luciana Aparecida; Duailibi, Monica Talarico; Iwamoto, Gerson Yoshinobu; Juliano, Yara; Duailibi, Michel Silvio; Ossamu Tanaka, Francisco André; Duailibi, Silvio Eduardo

    2016-01-01

    Aim: Tissue engineering is a multidisciplinary science that aims to produce replacement organs and biological substitutes. One of the techniques involves decellularizing a biological organ without altering its structure. One challenge is how to demonstrate which method would be better for this process. Methodology: Fifty premolar teeth were divided into five groups: G1 (control): solution of 10% formaldehyde; G2: phosphate buffer saline (PBS), 28 g of tetrasodium ethylenediaminetetraacetic (EDTA), sodium hypochlorite 2.5% (SH); G3: PBS, EDTA and 40v hydrogen peroxide (HP); G4: PBS, EDTA, SH, enzymatic detergent (ED); and G5: PBS, EDTA, HP, ED. Each group was analyzed by scanning electron microscopy (SEM), x-ray, measured weights and color and received statistical analysis. Conclusion: This study demonstrated that G5 was the most appropriate method to obtain a natural scaffold. PMID:28031968

  13. Property Assessment of Sponge Cake Added with Egg Replacer

    OpenAIRE

    Yaqiang He; Linlin Wang; Qian Lu

    2015-01-01

    Chicken egg which is always used in sponge cake production is likely to deteriorate during storage or transportation. This weakness prevents the wide use of chicken egg in sponge cake making. In order to solve this problem, egg replacer has been developed. In this study, effect of egg replacer on the property of sponge cake was analyzed. The result indicated egg replacer could improve the yield rate and specific volume of sponge cake. However, high content of egg replacer would negatively imp...

  14. Production of recombinant beta-hexosaminidase A, a potential enzyme for replacement therapy for Tay-Sachs and Sandhoff diseases, in the methylotrophic yeast Ogataea minuta.

    Science.gov (United States)

    Akeboshi, Hiromi; Chiba, Yasunori; Kasahara, Yoshiko; Takashiba, Minako; Takaoka, Yuki; Ohsawa, Mai; Tajima, Youichi; Kawashima, Ikuo; Tsuji, Daisuke; Itoh, Kohji; Sakuraba, Hitoshi; Jigami, Yoshifumi

    2007-08-01

    Human beta-hexosaminidase A (HexA) is a heterodimeric glycoprotein composed of alpha- and beta-subunits that degrades GM2 gangliosides in lysosomes. GM2 gangliosidosis is a lysosomal storage disease in which an inherited deficiency of HexA causes the accumulation of GM2 gangliosides. In order to prepare a large amount of HexA for a treatment based on enzyme replacement therapy (ERT), recombinant HexA was produced in the methylotrophic yeast Ogataea minuta instead of in mammalian cells, which are commonly used to produce recombinant enzymes for ERT. The problem of antigenicity due to differences in N-glycan structures between mammalian and yeast glycoproteins was potentially resolved by using alpha-1,6-mannosyltransferase-deficient (och1Delta) yeast as the host. Genes encoding the alpha- and beta-subunits of HexA were integrated into the yeast cell, and the heterodimer was expressed together with its isozymes HexS (alphaalpha) and HexB (betabeta). A total of 57 mg of beta-hexosaminidase isozymes, of which 13 mg was HexA (alphabeta), was produced per liter of medium. HexA was purified with immobilized metal affinity column for the His tag attached to the beta-subunit. The purified HexA was treated with alpha-mannosidase to expose mannose-6-phosphate (M6P) residues on the N-glycans. The specific activities of HexA and M6P-exposed HexA (M6PHexA) for the artificial substrate 4MU-GlcNAc were 1.2 +/- 0.1 and 1.7 +/- 0.3 mmol/h/mg, respectively. The sodium dodecyl sulfate-polyacrylamide gel electrophoresis pattern suggested a C-terminal truncation in the beta-subunit of the recombinant protein. M6PHexA was incorporated dose dependently into GM2 gangliosidosis patient-derived fibroblasts via M6P receptors on the cell surface, and degradation of accumulated GM2 ganglioside was observed.

  15. The tooth, the whole tooth: an unusual fight bite with an unnoticed embedded tooth in the hand.

    Science.gov (United States)

    Vijayan, Roshan; Awad, Guirgis

    2015-05-02

    A 19-year-old man presented to the plastic surgeons with a wound between his fourth and fifth metacarpophalangeal joints, with associated hand swelling and pain. He admitted to accidentally striking his brother in the mouth the previous evening. His brother reportedly made a hasty exit, and the patient dismissed the wound to his hand until waking up the next morning with swelling, pain and ascending lymphangitis. Radiographs revealed the unusual extent of his 'fight bite' injury with an entire human tooth embedded in his hand. Removal of the tooth and aggressive debridement was performed in theatre. Establishing an accurate account of events in these injuries can be difficult, with the orientation of the tooth in the soft tissues being more consistent with an uppercut than the reported jab. The patient made a good recovery following elevation, intravenous antibiotics, rigorous surgical debridement and postoperative hand therapy. 2015 BMJ Publishing Group Ltd.

  16. South African consumers' opinion of the potential health benefits of soy and soy products as hormone replacement therapy (HRT) / Anel Van Wyk de Vries

    OpenAIRE

    Van Wyk de Vries, Anel

    2003-01-01

    There is an increasing awareness in the food industry about the role that proper nutrition plays in maintaining health and preventing disease. Women especially have always been interested in nutrition and its impact on their well-being. This awareness has placed more pressure on the food industry to provide a greater variety of nutritious and wholesome products which has led to the development of a new field in the food industry, called functional foods. These are food produ...

  17. Property Assessment of Sponge Cake Added with Egg Replacer

    Directory of Open Access Journals (Sweden)

    Yaqiang He

    2015-08-01

    Full Text Available Chicken egg which is always used in sponge cake production is likely to deteriorate during storage or transportation. This weakness prevents the wide use of chicken egg in sponge cake making. In order to solve this problem, egg replacer has been developed. In this study, effect of egg replacer on the property of sponge cake was analyzed. The result indicated egg replacer could improve the yield rate and specific volume of sponge cake. However, high content of egg replacer would negatively impact the internal structure and sensory property of sponge cake. Based on the result of this research, optimum content of egg replacer in sponge cake is 3.6 g. In the industrial production of sponge cake, different types of wheat flour and additives would be used. The optimum content of egg replacer may be different from the result of this research. Therefore, in the industrial production, the optimum content of egg replacer should be determined based on experiment.

  18. Pain experience after simple tooth extraction.

    Science.gov (United States)

    Al-Khateeb, Taiseer Hussain; Alnahar, Amir

    2008-05-01

    To assess pain experience after simple uncomplicated tooth extraction and to see if there is a need to prescribe analgesic drugs after such a procedure. A random sample of patients presenting for tooth extraction at the Maxillofacial Unit, Jordan University of Science and Technology was included. A baseline assessment of previously experienced general and dental pains using numeric scales was done. Subsequently, tooth extractions were done and telephone interviews were made during evenings for a week. Pain intensity was assessed on a numeric scale, and use of analgesic drugs and pain quality were recorded. At the evening of extraction 81.8% of patients had pain. Female gender predominance in pain reporting was statistically significant on postextraction days 3 and 5. Chronically inflamed teeth caused the highest mean pain intensity scores and nonsmokers showed significantly higher mean pain intensity scores compared with smokers. Mild pain was experienced by most patients (38.6%) on the evening of extraction. It was found that 55.3% of participants (largely females) used analgesic drugs on the evening of extraction, and 6.8% of participants still used analgesic drugs on day 7 postextraction. There was a significant correlation between mean pain intensity score and previous dental injection pain. Patients, notably females, experienced pain of varying intensity after simple uncomplicated tooth extraction maximally at the evening of extraction; and greater than 50% of the patients used analgesic drugs. We recommend offering regular analgesic drugs during the first week after tooth extraction.

  19. Detecting Tooth Damage in Geared Drive Trains

    Science.gov (United States)

    Nachtsheim, Philip R.

    1997-01-01

    This paper describes a method that was developed to detect gear tooth damage that does not require a priori knowledge of the frequency characteristic of the fault. The basic idea of the method is that a few damaged teeth will cause transient load fluctuations unlike the normal tooth load fluctuations. The method attempts to measure the energy in the lower side bands of the modulated signal caused by the transient load fluctuations. The method monitors the energy in the frequency interval which excludes the frequency of the lowest dominant normal tooth load fluctuation and all frequencies above it. The method reacted significantly to the tooth fracture damage results documented in the Lewis data sets which were obtained from tests of the OH-58A transmission and tests of high contact ratio spiral bevel gears. The method detected gear tooth fractures in all four of the high contact ratio spiral bevel gear runs. Published results indicate other detection methods were only able to detect faults for three out of four runs.

  20. Controlled Deposition of HAp Mimicking Tooth Enamel

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    Chemical compositions and microsturcture of mature human tooth enamel were investigated by XRD , FTIR and SEM to further understand the characteristics of tooth enamel. In order to obtain apatite crystals chemically and structurally similar to those in tooth enamel, biomimetic way was employed. Selfassembled monolyers terminated with-SO3 H groups were used as deposition substrates and 1.5 SBF ( the concentrations of Ca2+ and PO43- ions 1.5 times than those in simulated body fluid ) with and without 5 ppm F- were used as soaking medium. The XRD and FTIR results showed that both the deposited fluoride-substituted hydroxyapatite( F-HAp ) crystals in 1.5 SBF with F- and hydroxyapatite ( HAp ) crystals in 1.5 SBF were carbonate-containing, mimicking human tooth enamel in chemical compositions. The SEM photos showed that needle-like F-HAp crystals bad large aspect ratios and grew in bundles, which were similar to the crystals in human tooth enamel.The results provide available information on dental restoration.

  1. The evolution of dinosaur tooth enamel microstructure.

    Science.gov (United States)

    Hwang, Sunny H

    2011-02-01

    The evolution of tooth enamel microstructure in both extinct and extant mammalian groups has been extensively documented, but is poorly known in reptiles, including dinosaurs. Previous intensive sampling of dinosaur tooth enamel microstructure revealed that: (1) the three-dimensional arrangement of enamel types and features within a tooth-the schmelzmuster-is most useful in diagnosing dinosaur clades at or around the family level; (2) enamel microstructure complexity is correlated with tooth morphology complexity and not necessarily with phylogenetic position; and (3) there is a large amount of homoplasy within Theropoda but much less within Ornithischia. In this study, the examination of the enamel microstructure of 28 additional dinosaur taxa fills in taxonomic gaps of previous studies and reinforces the aforementioned conclusions. Additionally, these new specimens reveal that within clades such as Sauropodomorpha, Neotheropoda, and Euornithopoda, the more basal taxa have simpler enamel that is a precursor to the more complex enamel of more derived taxa and that schmelzmusters evolve in a stepwise fashion. In the particularly well-sampled clade of Euornithopoda, correlations between the evolution of dental and enamel characters could be drawn. The ancestral schmelzmuster for Genasauria remains ambiguous due to the dearth of basal ornithischian teeth available for study. These new specimens provide new insights into the evolution of tooth enamel microstructure in dinosaurs, emphasizing the importance of thorough sampling within broadly inclusive clades, especially among their more basal members.

  2. Transient thermal and stress analysis of maxillary second premolar tooth using an exact three-dimensional model

    Directory of Open Access Journals (Sweden)

    Hashemipour Maryam

    2010-01-01

    Full Text Available Aim : In this paper, the temperature and stress distributions in an exact 3D-model of a restored maxillary second premolar tooth are obtained with finite element approach. Objective : The carious teeth need to restore with appropriate restorative materials. There are too many restorative materials which can be used instead of tooth structures; since tooth structures are being replaced, the restorative materials should be similar to original structure as could as possible . Materials and Methods : In the present study, a Mesial Occlusal Distal (MOD type of restoration is chosen and applied to a sound tooth model. Four cases of restoration are investigated: two cases in which base are used under restorative materials and two cases in which base is deleted. The restorative materials are amalgam and composite and glass-inomer is used as a base material. Modeling is done in the solid works ambient by means of an exact measuring of a typical human tooth dimensions. Tooth behavior under thermal load due to consuming hot liquids is analyzed by means of a three dimensional finite element method using ANSYS software. The highest values of tensile and compressive stresses are compared with tensile and compressive strength of the tooth and restorative materials and the value of shear stress on the tooth and restoration junctions is compared with the bond strength. Also, sound tooth under the same thermal load is analyzed and the results are compared with those obtained for restored models. Results : Temperature and stress distributions in the tooth are calculated for each case, with a special consideration in the vicinity of pulp and restoration region. Numerical results show that in two cases with amalgam, using the base material (Glass-ionomer under the restorative material causes to decrease the maximum temperature in the restorative teeth . In the stress analysis, it is seen that the principal stress has its maximum values in composite restorations

  3. Utilization of biomass in the U.S. for the production of ethanol fuel as a gasoline replacement. I - Terrestrial resource potential. II - Energy requirements, with emphasis on lignocellulosic conversion

    Science.gov (United States)

    Ferchak, J. D.; Pye, E. K.

    The paper assesses the biomass resource represented by starch derived from feed corn, surplus and distressed grain, and high-yield sugar crops planted on set-aside land in the U.S. It is determined that the quantity of ethanol produced may be sufficient to replace between 5 to 27% of present gasoline requirements. Utilization of novel cellulose conversion technology may in addition provide fermentable sugars from municipal, agricultural and forest wastes, and ultimately from highly productive silvicultural operations. The potential additional yield of ethanol from lignocellulosic biomass appears to be well in excess of liquid fuel requirements of an enhanced-efficiency transport sector at present mileage demands. No conflict with food production would be entailed. A net-energy assessment is made for lignocellulosic biomass feedstocks' conversion to ethanol and an almost 10:1 energy yield/energy cost ratio determined. It is also found that novel cellulose pretreatment and enzymatic conversion methods still under development may significantly improve even that figure, and that both chemical-feedstocks and energy-yielding byproducts such as carbon dioxide, biogas and lignin make ethanol production potentially energy self-sufficient. A final high-efficiency production approach incorporates site-optimized, nonpolluting energy sources such as solar and geothermal.

  4. Educating My Replacement

    Science.gov (United States)

    Tarter, Jill

    The search for extraterrestrial intelligence (SETI) could succeed tomorrow, decades from now, or never. The nature of this scientific exploration is such that we cannot predict success on any timescale; we only know that if we do not search, we cannot succeed. Having spent my scientific career in this field, I know perhaps better than anyone that the researchers of tomorrow may hold the key. Thus I have an enormous and vested interest in trying to educate the next generation of scientists. Because SETI excites such enthusiasm in young and old alike, I have an excellent opportunity to capture hearts and minds and leverage this interest into science education at many levels. Astrobiology is the new banner for inter- and cross-disciplinary investigations aimed at answering the big question "Are we alone?" The story of cosmic evolution is one that scientists at the SETI Institute have been telling for decades. We have used it as the framework for developing supplementary materials for elementary and middle schools called Life In The Universe. Currently we are tackling a year-long curriculum called Voyages Through Time for ninth grade students. This curriculum is delivered on CD-ROM and supported by the web. It focuses on evolution as a theme and stresses the contributions made from all the traditionally isolated branches of science --- and by the way, it's fun! I am a product of the post-Sputnik era and the American emphasis on science and engineering education. In the New York City bedroom community where I grew up, every school bond issue passed at every election. So I am appalled at the difficulties, the impecuniousness, and bureaucratic nonsense our pilot and field test teachers encounter on a daily basis. I am also overjoyed that even under such unreasonable conditions, I meet enthusiastic teachers who care about their students and are dedicated to helping them achieve the best possible education. Not all students will become scientists, nor should they. However

  5. Discrimination of tooth layers and dental restorative materials using cutting sounds.

    Science.gov (United States)

    Zakeri, Vahid; Arzanpour, Siamak; Chehroudi, Babak

    2015-03-01

    Dental restoration begins with removing carries and affected tissues with air-turbine rotary cutting handpieces, and later restoring the lost tissues with appropriate restorative materials to retain the functionality. Most restoration materials eventually fail as they age and need to be replaced. One of the difficulties in replacing failing restorations is discerning the boundary of restorative materials, which causes inadvertent removal of healthy tooth layers. Developing an objective and sensor-based method is a promising approach to monitor dental restorative operations and to prevent excessive tooth losses. This paper has analyzed cutting sounds of an air-turbine handpiece to discriminate between tooth layers and two commonly used restorative materials, amalgam and composite. Support vector machines were employed for classification, and the averaged short-time Fourier transform coefficients were selected as the features. The classifier performance was evaluated from different aspects such as the number of features, feature scaling methods, classification schemes, and utilized kernels. The total classification accuracies were 89% and 92% for cases included composite and amalgam materials, respectively. The obtained results indicated the feasibility and effectiveness of the proposed method.

  6. Effects of partial replacement of dietary starch from barley or corn with lactose on ruminal function, short-chain fatty acid absorption, nitrogen utilization, and production performance of dairy cows.

    Science.gov (United States)

    Chibisa, G E; Gorka, P; Penner, G B; Berthiaume, R; Mutsvangwa, T

    2015-04-01

    In cows fed diets based on corn-alfalfa silage, replacing starch with sugar improves milk production. Although the rate of ruminal fermentation of sugar is more rapid than that of starch, evidence has been found that feeding sugar as a partial replacement for starch does not negatively affect ruminal pH despite increasing diet fermentability. The mechanism(s) for this desirable response are unknown. Our objective was to determine the effects of replacing barley or corn starch with lactose (as dried whey permeate; DWP) on ruminal function, short-chain fatty acid (SCFA) absorption, and nitrogen (N) utilization in dairy cows. Eight lactating cows were used in a replicated 4 × 4 Latin square design with 28-d periods and source of starch (barley vs. corn) and level of DWP (0 vs. 6%, DM basis) as treatment factors. Four cows in 1 Latin square were ruminally cannulated for the measurement of ruminal function, SCFA absorption, and N utilization. Dry matter intake and milk and milk component yields did not differ with diet. The dietary addition of DWP tended to increase ruminal butyrate concentration (13.6 vs. 12.2 mmol/L), and increased the Cl(-)-competitive absorption rates for acetate and propionate. There was no sugar effect on minimum ruminal pH, and the duration and area when ruminal pH was below 5.8. Minimum ruminal pH tended to be lower in cows fed barley compared with those fed corn (5.47 vs. 5.61). The duration when ruminal pH was below pH 5.8 tended to be shorter (186 vs. 235 min/d), whereas the area (pH × min/d) that pH was below 5.8 was smaller (47 vs. 111) on the corn than barley diets. Cows fed the high- compared with the low-sugar diet had lower ruminal NH3-N concentration. Feeding the high-sugar diet tended to increase apparent total-tract digestibility of dry matter and organic matters and increased apparent total-tract digestibility of fat. Apparent total-tract digestibility of N tended to be greater in cows fed barley compared with those fed corn

  7. PKA regulatory subunit expression in tooth development.

    Science.gov (United States)

    de Sousa, Sílvia Ferreira; Kawasaki, Katsushige; Kawasaki, Maiko; Volponi, Ana Angelova; Gomez, Ricardo Santiago; Gomes, Carolina Cavaliéri; Sharpe, Paul T; Ohazama, Atsushi

    2014-05-01

    Protein kinase A (PKA) plays critical roles in many biological processes including cell proliferation, cell differentiation, cellular metabolism and gene regulation. Mutation in PKA regulatory subunit, PRKAR1A has previously been identified in odontogenic myxomas, but it is unclear whether PKA is involved in tooth development. The aim of the present study was to assess the expression of alpha isoforms of PKA regulatory subunit (Prkar1a and Prkar2a) in mouse and human odontogenesis by in situ hybridization. PRKAR1A and PRKAR2A mRNA transcription was further confirmed in a human deciduous germ by qRT-PCR. Mouse Prkar1a and human PRKAR2A exhibited a dynamic spatio-temporal expression in tooth development, whereas neither human PRKAR1A nor mouse Prkar2a showed their expression in odontogenesis. These isoforms thus showed different expression pattern between human and mouse tooth germs. Copyright © 2014 Elsevier B.V. All rights reserved.

  8. Effect of drugs on orthodontic tooth movement

    Directory of Open Access Journals (Sweden)

    Siti Sarah Aulia Amrullah

    2016-06-01

    Full Text Available Orthodontic tooth movement is basically a biological response to mechanical forces given to the teeth in orthodontic treatment, which involving the periodontal tissue and alveolar bone, resulting in the release of numerous substances from the dental tissues and surrounding structure. Remodeling changes in periodontal tissues are considered to be essential in effecting orthodontic tooth movement which is the base of orthodontic correction. Molecules produced in various diseased tissues or drugs and nutrients consumed regularly by patients, can influence mechanically stressed periodontal tissue through the circulation and interact with target cell combination of which may be inhibitory, additive or synergize. Medications might have an important influence on the rate of tooth movement, and information on their consumption is essential to adequately discuss treatment planning with patients. Therefore it is imperative to the practitioners being in medical profession, must pay close attention to the drug consumption history of every patient before and during the course of treatment.

  9. Signaling networks regulating tooth organogenesis and regeneration, and the specification of dental mesenchymal and epithelial cell lineages.

    Science.gov (United States)

    Jussila, Maria; Thesleff, Irma

    2012-04-01

    Teeth develop as ectodermal appendages from epithelial and mesenchymal tissues. Tooth organogenesis is regulated by an intricate network of cell-cell signaling during all steps of development. The dental hard tissues, dentin, enamel, and cementum, are formed by unique cell types whose differentiation is intimately linked with morphogenesis. During evolution the capacity for tooth replacement has been reduced in mammals, whereas teeth have acquired more complex shapes. Mammalian teeth contain stem cells but they may not provide a source for bioengineering of human teeth. Therefore it is likely that nondental cells will have to be reprogrammed for the purpose of clinical tooth regeneration. Obviously this will require understanding of the mechanisms of normal development. The signaling networks mediating the epithelial-mesenchymal interactions during morphogenesis are well characterized but the molecular signatures of the odontogenic tissues remain to be uncovered.

  10. Robotic mitral valve replacement.

    Science.gov (United States)

    Senay, Sahin; Gullu, Ahmet Umit; Kocyigit, Muharrem; Degirmencioglu, Aleks; Karabulut, Hasan; Alhan, Cem

    2014-01-01

    Robotic surgical techniques allow surgeons to perform mitral valve surgery. This procedure has gained acceptance, particularly for mitral valve repair in degenerative mitral disease. However, mitral repair may not always be possible, especially in severely calcified mitral valve of rheumatic origin. This study demonstrates the basic concepts and technique of robotic mitral valve replacement for valve pathologies that are not suitable for repair.

  11. Replacing America's Job Bank

    Science.gov (United States)

    Vollman, Jim

    2009-01-01

    The Job Central National Labor Exchange (www.jobcentral.com) has become the effective replacement for America's Job Bank with state workforce agencies and, increasingly, with community colleges throughout the country. The American Association of Community Colleges (AACC) has formed a partnership with Job Central to promote its use throughout the…

  12. Replacing America's Job Bank

    Science.gov (United States)

    Vollman, Jim

    2009-01-01

    The Job Central National Labor Exchange (www.jobcentral.com) has become the effective replacement for America's Job Bank with state workforce agencies and, increasingly, with community colleges throughout the country. The American Association of Community Colleges (AACC) has formed a partnership with Job Central to promote its use throughout the…

  13. 重复购买与市场变化下产品扩散实证研究%Empirical Research on the Product Diffusion with Replacement Purchase and Dynamic Market

    Institute of Scientific and Technical Information of China (English)

    赵小羽; 成艾国; 沈阳; 钟志华

    2012-01-01

    重复购买以及市场环境变化对产品扩散有影响作用,从而限制了基本产品扩散模型的应用.通过构建反映动态市场变化的环境变量集合,基于影响系数对产品扩散模型做出修正,同时考虑重复购买因素,得到重复购买与市场变化下的产品扩散模型.以我国汽车产品细分市场之一的微型交叉型乘用车产品扩散为实例,将超过使用年限后的重复购买因素与市场的燃油价格、产品价格、宏观政策等因素作为修正变量融入扩散模型,分析目标产品的扩散规律.研究结果表明,加入重复购买与动态市场因素后,模型计算结果拟合度提高13%,预测结果的误差平均绝对比率由23.93降低至5.5.由此可知,提出的扩展产品扩散模型在解释能力和预测能力上均优于基本模型.%Replacement purchase and dynamic market influence product diffusion, which limits the application of basic product diffusion model. In this paper, the dynamic market variables were constructed to reflect the changes of the market, and the extended product diffusion model was verified with influence coefficients considering replacement purchase and dynamic market factors. The mini cross-type passenger vehicle ?which is one segment of China's automobile market?was empirically studied. The factors, including fuel price, product price, policies of the government and repeated purchase, were analysed in the extended diffusion model to analyse the target product diffusion rule. The results have indicated that the fitting degree of extended model is increased by 13% over the basic model, and the mean absolute percent error is decreased from 23. 93 to 5. 5. Therefore, the proposed extended model with perfect fitness and forecasting accuracy shows better performance in explaining the actual diffusion rule.

  14. Maxillary tooth displacement in the infratemporal fossa.

    Science.gov (United States)

    Roshanghias, Korosh; Peisker, Andre; Zieron, Jörg Olaf

    2016-01-01

    Wisdom tooth operations are sometimes accompanied by complications. This case report shows complications during upper jaw third molar removal. Expectable problems during oral surgery should be planned to be solved in advance. Displacement of the third molar during oral surgeries as a considerable complication is rarely discussed scientifically. A good design of flap, adequate power for extraction, and clear view on the surgical field are crucial. Three-dimensional radiographic diagnostics in terms of cone beam computed tomography is helpful after tooth displacement into the infratemporal fossa.

  15. Maxillary tooth displacement in the infratemporal fossa

    Directory of Open Access Journals (Sweden)

    Korosh Roshanghias

    2016-01-01

    Full Text Available Wisdom tooth operations are sometimes accompanied by complications. This case report shows complications during upper jaw third molar removal. Expectable problems during oral surgery should be planned to be solved in advance. Displacement of the third molar during oral surgeries as a considerable complication is rarely discussed scientifically. A good design of flap, adequate power for extraction, and clear view on the surgical field are crucial. Three-dimensional radiographic diagnostics in terms of cone beam computed tomography is helpful after tooth displacement into the infratemporal fossa.

  16. Ectopic tooth in maxillary sinus: Case series.

    Science.gov (United States)

    Ramanojam, Shandilya; Halli, Rajshekhar; Hebbale, Manjula; Bhardwaj, Smita

    2013-01-01

    Ectopic eruption of a tooth within the dentate region of the jaws is often noticed in clinical practice and is well documented in the literature. But the ectopic eruption into the non dentate region is rare and scantly documented. The maxillary sinus is one such a non dentate region, apart from nasal septum, mandibular condyle, coronoid process and the palate, to accommodate such ectopic eruptions of teeth. Due to its rarity and lack of consensus over its management, the incidence deserves to be added to the literature and discussed. Early surgical intervention for removal of ectopic tooth along with enucleation of the associated cyst, if any, is the treatment of choice.

  17. [Ectopic molar tooth in the maxillary sinus].

    Science.gov (United States)

    Altun, Hüseyin; Teker, Ayşenur Meriç; Ceran, Murat; Gedikli, Orhan

    2007-01-01

    The development of intranasal ectopic teeth is rare. Although they are more commonly seen in the palate and maxillary sinus, they can also be found in the mandibular condyle, coronoid process, and nasal cavity. A 30-year-old male patient presented with a complaint of headache. Computed tomography of the paranasal sinuses showed a bony mass in the right maxillary sinus wall, 1 cm in size. He did not have any history of maxillofacial trauma or operation. The mass was removed via a Caldwell-Luc procedure. It looked like a tooth. Histopathologic diagnosis was made as ectopic molar tooth. The patient was asymptomatic two weeks after the operation.

  18. EFSA NDA Panel (EFSA Panel on Dietetic Products, Nutrition and Allergies), 2013. Scientific Opinion on the substantiation of a health claim related to “non - fermentable ” carbohydrates and maintenance of tooth mineralisation by decreasing tooth demineralisation pursuant to Article 13(5

    DEFF Research Database (Denmark)

    Tetens, Inge

    Following an application from Roquette Frères, submitted for authorisation of a health claim pursuant to Article 13(5) of Regulation (EC) No 1924/2006 via the Competent Authority of France, the EFSA Panel on Dietetic Products, Nutrition and Allergies (NDA) was asked to deliver an opinion on the s...... not lower plaque pH below 5.7 during and up to 30 minutes after consumption, and does not lead to dental erosion. © European Food Safety Authority, 2013......Following an application from Roquette Frères, submitted for authorisation of a health claim pursuant to Article 13(5) of Regulation (EC) No 1924/2006 via the Competent Authority of France, the EFSA Panel on Dietetic Products, Nutrition and Allergies (NDA) was asked to deliver an opinion...

  19. Nasomaxillary hypoplasia with a congenitally missing tooth treated with LeFort II osteotomy, autotransplantation, and nickel-titanium alloy wire.

    Science.gov (United States)

    Ishida, Takayoshi; Ikemoto, Shigehiro; Ono, Takashi

    2015-09-01

    In some skeletal Class III adult patients with nasomaxillary hypoplasia, the LeFort I osteotomy provides insufficient correction. This case report describes a 20-year-old woman with a combination of nasomaxillary hypoplasia and a protrusive mandible with a congenitally missing mandibular second premolar. We performed a LeFort II osteotomy for maxillary advancement. Autotransplantation of a tooth was also performed; the donor tooth was used to replace the missing permanent tooth. To increase the chance of success, we applied light continuous force with an improved superelastic nickel-titanium alloy wire technique before extraction and after transplantation. The patient's profile and malocclusion were corrected, and the autotransplanted tooth functioned well. The postero-occlusal relationships were improved, and ideal overbite and overjet relationships were achieved. The methods used in this case represent a remarkable treatment. Copyright © 2015 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

  20. Oral hygiene products and acidic medicines.

    Science.gov (United States)

    Hellwig, E; Lussi, A

    2006-01-01

    Acidic or EDTA-containing oral hygiene products and acidic medicines have the potential to soften dental hard tissues. The low pH of oral care products increases the chemical stability of some fluoride compounds, favors the incorporation of fluoride ions in the lattice of hydroxyapatite and the precipitation of calcium fluoride on the tooth surface. This layer has some protective effect against an erosive attack. However, when the pH is too low or when no fluoride is present these protecting effects are replaced by direct softening of the tooth surface. Xerostomia or oral dryness can occur as a consequence of medication such as tranquilizers, anti-histamines, anti-emetics and anti-parkinsonian medicaments or of salivary gland dysfunction e.g. due to radiotherapy of the oral cavity and the head and neck region. Above all, these patients should be aware of the potential demineralization effects of oral hygiene products with low pH and high titratable acids. Acetyl salicylic acid taken regularly in the form of multiple chewable tablets or in the form of headache powder as well chewing hydrochloric acids tablets for treatment of stomach disorders can cause erosion. There is most probably no direct association between asthmatic drugs and erosion on the population level. Consumers, patients and health professionals should be aware of the potential of tooth damage not only by oral hygiene products and salivary substitutes but also by chewable and effervescent tablets. Additionally, it can be assumed that patients suffering from xerostomia should be aware of the potential effects of oral hygiene products with low pH and high titratable acids.

  1. 3D analysis of craniofacial growth and tooth eruption

    DEFF Research Database (Denmark)

    Kreiborg, Sven

    The 9th International Congress on Cleft Palate and Related Craniofacial Anomalies, 3D analysis, craniofacial growth, tooth eruption......The 9th International Congress on Cleft Palate and Related Craniofacial Anomalies, 3D analysis, craniofacial growth, tooth eruption...

  2. Seal Out Tooth Decay: A Fact Sheet for Parents

    Science.gov (United States)

    ... Institute of Dental and Craniofacial Research Seal Out Tooth Decay A Fact Sheet for Parents What are dental ... important reason for getting sealants is to avoid tooth decay. • Fluoride in toothpaste and in drinking water protects ...

  3. 21 CFR 872.3200 - Resin tooth bonding agent.

    Science.gov (United States)

    2010-04-01

    .... A resin tooth bonding agent is a device material, such as methylmethacrylate, intended to be painted on the interior of a prepared cavity of a tooth to improve retention of a restoration, such as...

  4. Finemet nanocrystalline soft magnetic alloy: Investigation of glass forming ability, crystallization mechanism, production techniques, magnetic softness and the effect of replacing the main constituents by other elements

    Energy Technology Data Exchange (ETDEWEB)

    Gheiratmand, T.; Hosseini, H.R. Madaah, E-mail: madaah@sharif.ir

    2016-06-15

    Finemet soft magnetic alloy has been in the focus of interest in the last years due to its high saturation magnetization, high permeability and low core loss. The great quantity of papers has been devoted to the study of its structural and magnetic properties, confirms this claim. This paper reviews the different researches performed on Finemet up to now. The criteria that should be satisfied in order to have the high glass forming ability in an alloy and also the techniques applied for production of Finemet ribbons, powders and bulk samples have been explained. In addition, the mechanism of devitrification, nanocrystallization and magnetic softness in this applicable magnetic alloy has been discussed in detail. Finally, the effect of different elements substituted with the main constituents in Finemet has been summarized through the studies on the characterization and magnetic properties of different Finemet-type alloys. - Highlights: • The criteria for getting high glass forming ability in an alloy have been reviewed. • Techniques applied to make Finemet ribbons and bulk samples have been explained. • Mechanism of devitrification and nanocrystallization has been discussed in detail. • The mechanism of magnetic softness in this magnetic alloy has been demonstrated. • The effect of main elements substitution in Finemet has been summarized.

  5. Hyaluronan in human deciduous tooth germs in the bell stage. Histochemistry and immunohistochemistry

    DEFF Research Database (Denmark)

    Matthiessen, Martin Ebbe; Garbarsch, Charly; Olsen, Birgitte Engelbrecht

    1997-01-01

    Anatomy, development, glycosaminoglycans, hyaluronan, tooth germs, histochemistry, immunocytochemistry......Anatomy, development, glycosaminoglycans, hyaluronan, tooth germs, histochemistry, immunocytochemistry...

  6. Functional Properties of Tooth Pulp Neurons Responding to Thermal Stimulation

    OpenAIRE

    Ahn, D.K.; Doutova, E.A.; McNaughton, K.; Light, A.R.; Närhi, M.; Maixner, W.

    2012-01-01

    The response properties of tooth pulp neurons that respond to noxious thermal stimulation of the dental pulp have been not well-studied. The present study was designed to characterize the response properties of tooth pulp neurons to noxious thermal stimulation of the dental pulp. Experiments were conducted on 25 male ferrets, and heat stimulation was applied by a computer-controlled thermode. Only 15% of tooth pulp neurons (n = 39) responded to noxious thermal stimulation of the teeth. Tooth ...

  7. A panorama of tooth wear during the medieval period.

    Science.gov (United States)

    Esclassan, Rémi; Hadjouis, Djillali; Donat, Richard; Passarrius, Olivier; Maret, Delphine; Vaysse, Frédéric; Crubézy, Eric

    2015-01-01

    Tooth wear is a natural phenomenon and a universal occurrence that has existed from the origin of humankind and depends on the way of life, especially diet. Tooth wear was very serious in ancient populations up to the medieval period. The aim of this paper is to present a global view of tooth wear in medieval times in Europe through different parameters: scoring systems, quantity and direction of wear, gender, differences between maxilla and mandible, relations with diet, caries, tooth malpositions and age.

  8. A prospective study of Astra single tooth implants.

    Science.gov (United States)

    Palmer, R M; Smith, B J; Palmer, P J; Floyd, P D

    1997-06-01

    A new design of single tooth implant (AstraTech, Molndal Sweden) featuring a microthreaded conical neck and TiO blast surface was evaluated clinically and radiographically after 2 years in function. Fifteen patients (age range 16 to 48) with missing maxillary anterior teeth (6 central incisors, 8 laterals, 1 bicuspid) had 4, 13 mm and 11, 15 mm implants placed under local anaesthesia and left for a period of 6 months before exposure and abutment connection/crown fabrication. All patients were seen at 4 to 6 monthly intervals for hygienist maintenance. Radiographs using Rinn holders and a long cone technique were taken at the crown insertion and after 1 year (14 subjects) and 2 years (12 subjects). All implants were successfully integrated at stage 2, and no implants have been lost. The internal conical seal design of the abutment/implant interface facilitated connection and there were no cases of abutment screw loosening. No soft tissue problems were observed, and the gingival morphology/health was well maintained. One crown was recemented after 18 months in function, and 1 crown was replaced because of a fracture to the porcelain incisal edge. At crown insertion, the mean bone level was 0.46 to 0.48 mm apical to the top of the implant and there were no statistically significant changes in the bone level over the 2 years of the study. In conclusion, the single tooth Astra implants were highly successful and bone changes within the first 2 years of function were comparable with other systems reporting high long-term success rates.

  9. Implant-supported single-tooth restorations. A 12-year prospective study.

    Science.gov (United States)

    Donati, Mauro; Ekestubbe, Annika; Lindhe, Jan; Wennström, Jan L

    2016-10-01

    The aim of this study was to evaluate prospectively the 12-year outcome of implant-supported single-tooth restorations. Originally 45 self-tapping Astra Tech TiOblast(®) ST-implants were installed by a two-stage protocol in 40 subjects requiring single-tooth prosthetic replacement for a missing tooth. Clinical and radiologic examinations were performed at completion of the prosthetic treatment 4-7 months after implant installation surgery and after 5 and 12 years in function. At 12 years 31 patients and 35 implants were available for evaluation. The overall failure rate after 12 years was 10.3% on the subject level and 9.1% on the implant level. The mean bone loss amounted to 0.67 mm (SD 2.20) on a subject level and 0.47 mm (1.72) on an implant level. Three subjects (10%) and three implants (8.6%) were diagnosed with peri-implantitis. Five subjects had experienced technical complications; three incidences of loosening of the abutment retention screw during the first 5 years and two minor porcelain fracture of the crown (two patients) between 5- and 12-years of follow-up. The findings reported in this 12-year prospective case series suggest that the use of the Astra Tech dental implants may be a valid treatment alternative for single-tooth replacement prostheses. © 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  10. Dental histology of Coelophysis bauri and the evolution of tooth attachment tissues in early dinosaurs.

    Science.gov (United States)

    Fong, Raymond K M; LeBlanc, Aaron R H; Berman, David S; Reisz, Robert R

    2016-07-01

    Studies of dinosaur teeth have focused primarily on external crown morphology and thus, use shed or in situ tooth crowns, and are limited to the enamel and dentine dental tissues. As a result, the full suites of periodontal tissues that attach teeth to the jaws remain poorly documented, particularly in early dinosaurs. These tissues are an integral part of the tooth and thus essential to a more complete understanding of dental anatomy, development, and evolution in dinosaurs. To identify the tooth attachment tissues in early dinosaurs, histological thin sections were prepared from the maxilla and dentary of a partial skull of the early theropod Coelophysis bauri from the Upper Triassic (Rhaetian- 209-201 Ma) Whitaker Quarry, New Mexico, USA. As one of the phylogenetically and geologically oldest dinosaurs, it is an ideal candidate for examining dental tissues near the base of the dinosaurian clade. The teeth of C. bauri exhibited a fibrous tooth attachment in which the teeth possessed five tissues: enamel, dentine, cementum, periodontal ligament (PDL), and alveolar bone. Our findings, coupled with those of more recent studies of ornithischian teeth, indicate that a tripartite periodontium, similar to that of crocodilians and mammals, is the plesiomorphic condition for dinosaurs. The occurrence of a tripartite periodontium in dinosaurs adds to the growing consensus that the presence of these tissues is the plesiomorphic condition for the major amniote clades. Furthermore, this study establishes the relative timing of tissue development and growth directions of periodontal tissues and provides the first comparative framework for future studies of dinosaur periodontal development, tooth replacement, and histology. J. Morphol. 277:916-924, 2016. © 2016 Wiley Periodicals, Inc.

  11. Expression analysis of candidate genes regulating successional tooth formation in the human embryo

    Directory of Open Access Journals (Sweden)

    Ryan eOlley

    2014-11-01

    Full Text Available Human dental development is characterized by formation of the primary teeth, which are subsequently replaced by the secondary dentition. The secondary dentition consists of incisors, canines and premolars derived from the successional dental lamina of the corresponding primary tooth germs; and molar teeth, which develop as a continuation of the dental lamina. Currently, very little is known about the molecular regulation of human successional tooth formation. Here, we have investigated expression of three candidate regulators for human successional tooth formation; the Fibroblast Growth Factor-antagonist SPROUTY2, the Hedgehog co-receptor GAS1 and the RUNT-related transcription factor RUNX2. At around 8 weeks of development, only SPROUTY2 showed strong expression in both epithelium and mesenchyme of the early bud. During the cap stage between 12-14 weeks, SPROUTY2 predominated in the dental papilla and inner enamel epithelium of the developing tooth. No specific expression was seen in the successional dental lamina. GAS1 was expressed in the dental papilla and follicle, and associated with mesenchyme adjacent to the primary dental lamina during the late cap stage. In addition, GAS1 transcripts were identifiable in mesenchyme adjacent to the successional lamina, particularly in the developing primary first molar. For RUNX2, expression predominated in the dental papilla and follicle. Localized expression was seen in mesenchyme adjacent to the primary dental lamina at the late cap stage; but surprisingly, not in the early successional lamina at these stages. These findings confirm that SPROUTY2, GAS1 and RUNX2 are all expressed during early human tooth development. The domains of GAS1 and RUNX2 are consistent with a role influencing function of the primary dental lamina but only GAS1 transcripts were identifiable in the successional lamina at these early stages of development.

  12. In vitro differentiation and attachment of human embryonic stem cells on periodontal tooth root surfaces.

    Science.gov (United States)

    Inanç, Bülend; Elçin, A Eser; Elçin, Y Murat

    2009-11-01

    Periodontal tissue engineering based on cell replacement therapies is a promising field for improved regeneration of tooth supporting structures lost as a result of destructive periodontal diseases. Human embryonic stem cells (hESCs) could become adequate cell source for tissue engineering because of their unlimited proliferative potential and ability to differentiate to all somatic cell types. The aim of this study was to analyze the differentiation capacity of hESCs toward periodontal compartment cells and their relationship with tooth root surfaces in vitro. Periodontal ligament fibroblastic cell (PDLF) cultures were established and characterized; hESCs (HUES-9 line) were expanded in undifferentiated state and characterized for pluripotency morphologically and immunohistochemically. Extracted tooth root slices (RS) of 300 microm thickness, prepared with both periodontal and endodontic instrumentation, were used. Three different experimental groups were established: (i) undifferentiated hESC colonies cultured on and around the RS; (ii) undifferentiated hESC colonies cultured on and around RS with PDLF coculture, and (iii) undifferentiated hESC colonies cultured on and around RS with PDLF coculture in osteoinductive medium for 3 weeks. The fibrogenic and osteogenic marker expression was assessed with immunohistochemistry; histological staining and scanning electron microscopy were utilized to determine the relationship between differentiating hESCs and mineralized tooth root structures. Results demonstrate that hESC differentiation is influenced by tooth structures, PDLFs, and osteogenic medium, resulting with increased propensity toward mesenchymal lineage commitment, and formation of soft-hard tissue relationship in close contact areas. The proposed experimental system may facilitate further understanding in development of periodontal structures and contribute to realization of hESCs as a cell source in periodontal tissue engineering applications.

  13. Functionality of Inulin as a Sucrose Replacer in Cookie Baking

    Science.gov (United States)

    Inulin was evaluated as a sucrose replacer for healthy cookie production with benefits of low glycemic impact and prebiotic soluble fiber. Sucrose (as a reference) and three inulin products of different concentrations (as soluble fibers) were used to explore the effects of sugar-replacer type on so...

  14. The Importance of Tooth Decay Prevention in Children under Three

    Science.gov (United States)

    Milgrom, Peter; Huebner, Colleen; Chi, Donald

    2010-01-01

    Tooth decay and tooth loss was once the norm but public health interventions have led to major improvements for most people. Nevertheless, not all children have benefited. Dental disease in young children is unacceptably high. Tooth decay is preventable. Early childhood educators are often the first to notice the problem. Professional…

  15. The Importance of Tooth Decay Prevention in Children under Three

    Science.gov (United States)

    Milgrom, Peter; Huebner, Colleen; Chi, Donald

    2010-01-01

    Tooth decay and tooth loss was once the norm but public health interventions have led to major improvements for most people. Nevertheless, not all children have benefited. Dental disease in young children is unacceptably high. Tooth decay is preventable. Early childhood educators are often the first to notice the problem. Professional…

  16. Tooth-marked small theropod bone: an extremely rare trace

    DEFF Research Database (Denmark)

    Jacobsen, Aase Roland

    2001-01-01

    Tooth-marked dinosaur bones provide insight into feeding behaviours and biting strategies of theropod dinosaurs. The majority of theropod tooth marks reported to date have been found on herbivorous dinosaur bones, although some tyrannosaurid bones with tooth marks have also been reported. In 1988...

  17. 21 CFR 872.3690 - Tooth shade resin material.

    Science.gov (United States)

    2010-04-01

    ...) MEDICAL DEVICES DENTAL DEVICES Prosthetic Devices § 872.3690 Tooth shade resin material. (a) Identification. Tooth shade resin material is a device composed of materials such as bisphenol-A glycidyl... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Tooth shade resin material. 872.3690 Section...

  18. An inductive signalling network regulates mammalian tooth morphogenesis with implications for tooth regeneration.

    Science.gov (United States)

    Li, Z; Yu, M; Tian, W

    2013-10-01

    Sequential and reciprocal epithelial-mesenchymal interactions, essential throughout such aspects of tooth morphogenesis as patterning, size and number of teeth, involves a well-ordered series of inductive and permissive signals that exert global control over cell proliferation, differentiation and organogenesis. In particular, growth factors, transcription factors and their corresponding receptors, as well as other soluble morphogens, make up a regulatory network at the molecular level that synergistically or antagonistically controls intra-/inter-cellular signal transduction during odontogenesis. This review summarizes recent advances in the study of crucial signalling pathways, for example of BMPs, Wnt, Notch, Shh and FGF, with emphasis on the potential integrated signalling network responsible for tooth formation. Our work probes into the complexity of these inductive signalling pathways to promote the understanding of tooth regeneration. Additionally, our study provides further insights into therapeutic strategies for various dental abnormalities in patterning and number, such as tooth agenesis and supernumerary teeth.

  19. Storing tooth segments for optimal esthetics

    NARCIS (Netherlands)

    Tuzuner, T.; Turgut, S.; Özen, B.; Kılınç, H.; Bagis, B.

    2016-01-01

    Objective: A fractured whole crown segment can be reattached to its remnant; crowns from extracted teeth may be used as pontics in splinting techniques. We aimed to evaluate the effect of different storage solutions on tooth segment optical properties after different durations. Study design: Sixty c

  20. Life of a Tooth: A Visual Timeline

    Medline Plus

    Full Text Available ... Bomberman atari oyunlarý bakugan oyunlarý geta poker friv Home InfoBites Find an AGD Dentist Your Family's Oral ... words mean. The Life of a Tooth games Home | InfoBites | Find a Dentist | Your Family's Oral Health | ...

  1. Age effect on orthodontic tooth movement

    NARCIS (Netherlands)

    Ren, Yijin

    2003-01-01

    This study was performed to investigate the effect of age on the efficiency of orthodontic tooth movement based on critical literature reviews, studies on a standardized orthodontic animal model and a non-invasive clinical investigation. A systematic review was performed on the optimum force for ort

  2. Bleaching of the discolored traumatized tooth

    DEFF Research Database (Denmark)

    Dahl, Jon E.; Kopperud, Siemen E.; Pallesen, Ulla

    2017-01-01

    This chapter focuses on the treatment of discolored traumatized teeth, most of them being non-vital and subsequently, endodontically treated. Tooth bleaching based upon hydrogen peroxide as the active agent, applied directly or produced in a chemical reaction from sodium perborate or carbamide...

  3. Early Onset Charcot-Marie-Tooth Disease

    Directory of Open Access Journals (Sweden)

    J Gordon Millichap

    2005-06-01

    Full Text Available The clinical signs and genetic analysis of early-onset Charcot-Marie-Tooth disease (CMT in a 2-year-old boy and members of his family are reported from the Academic Medical Center, Amsterdam, and Sophia Children’s Hospital, Rotterdam, the Netherlands.

  4. Life of a Tooth: A Visual Timeline

    Medline Plus

    Full Text Available ... Jaw Pain? Check Your Posture! Learn what those dental words mean. The Life of a Tooth games Home | InfoBites | Find a Dentist | Your Family's Oral Health | Newsroom | RSS About AGD | Contact AGD | Site Map | ... | Terms and Conditions © 1996-2017 Academy of General Dentistry. All Rights Reserved.

  5. Restoration of the endodontically treated posterior tooth

    Directory of Open Access Journals (Sweden)

    Andrea Polesel

    2014-06-01

    Results and conclusions: Direct adhesive restorations, indirect bonded restorations and traditional full crown are three therapeutic options for the single posterior endodontically treated teeth. The amount of remaining sound tooth structure is the most significant factor influencing the therapeutic approach. The clinician's operative skill is a determining aspect for long-term success of adhesive inlays.

  6. psychosocial aspect of anterior tooth discoloration among ...

    African Journals Online (AJOL)

    tooth colour7 and 28% of adults in the UK were dissatisfied with the ... often results in loss of self-esteem and damage to physical and ... childhood and adolescence can have a significant effect on psychosocial ... the school authorities. Written ...

  7. Tooth loss: Are the patients prepared?

    African Journals Online (AJOL)

    this has on their lives. ... (12.9%) cases, depression in 11 (6.4%), feeling of losing body part in 24 (14%), feeling of aging in 4 (2.3%), .... and the quality of life of the individuals following tooth ... However, in the elderly, periodontal diseases are.

  8. Life of a Tooth: A Visual Timeline

    Medline Plus

    Full Text Available ... friv Home InfoBites Find an AGD Dentist Your Family's Oral Health About the AGD Dental care and ... Tooth games Home | InfoBites | Find a Dentist | Your Family's Oral Health | Newsroom | RSS About AGD | Contact AGD | ...

  9. Computed tomography to quantify tooth abrasion

    Science.gov (United States)

    Kofmehl, Lukas; Schulz, Georg; Deyhle, Hans; Filippi, Andreas; Hotz, Gerhard; Berndt-Dagassan, Dorothea; Kramis, Simon; Beckmann, Felix; Müller, Bert

    2010-09-01

    Cone-beam computed tomography, also termed digital volume tomography, has become a standard technique in dentistry, allowing for fast 3D jaw imaging including denture at moderate spatial resolution. More detailed X-ray images of restricted volumes for post-mortem studies in dental anthropology are obtained by means of micro computed tomography. The present study evaluates the impact of the pipe smoking wear on teeth morphology comparing the abraded tooth with its contra-lateral counterpart. A set of 60 teeth, loose or anchored in the jaw, from 12 dentitions have been analyzed. After the two contra-lateral teeth were scanned, one dataset has been mirrored before the two datasets were registered using affine and rigid registration algorithms. Rigid registration provides three translational and three rotational parameters to maximize the overlap of two rigid bodies. For the affine registration, three scaling factors are incorporated. Within the present investigation, affine and rigid registrations yield comparable values. The restriction to the six parameters of the rigid registration is not a limitation. The differences in size and shape between the tooth and its contra-lateral counterpart generally exhibit only a few percent in the non-abraded volume, validating that the contralateral tooth is a reasonable approximation to quantify, for example, the volume loss as the result of long-term clay pipe smoking. Therefore, this approach allows quantifying the impact of the pipe abrasion on the internal tooth morphology including root canal, dentin, and enamel volumes.

  10. Life of a Tooth: A Visual Timeline

    Medline Plus

    Full Text Available ... friv Home InfoBites Find an AGD Dentist Your Family's Oral Health About the AGD Dental care and ... Tooth games Home | InfoBites | Find a Dentist | Your Family's Oral Health | Newsroom | RSS About AGD | Contact AGD | ...

  11. Roles of Bmp4 during tooth morphogenesis and sequential tooth formation

    Science.gov (United States)

    Jia, Shihai; Zhou, Jing; Gao, Yang; Baek, Jin-A; Martin, James F.; Lan, Yu; Jiang, Rulang

    2013-01-01

    Previous studies have suggested that Bmp4 is a key Msx1-dependent mesenchymal odontogenic signal for driving tooth morphogenesis through the bud-to-cap transition. Whereas all tooth germs were arrested at the bud stage in Msx1–/– mice, we show that depleting functional Bmp4 mRNAs in the tooth mesenchyme, through neural crest-specific gene inactivation in Bmp4f/f;Wnt1Cre mice, caused mandibular molar developmental arrest at the bud stage but allowed maxillary molars and incisors to develop to mineralized teeth. We found that expression of Osr2, which encodes a zinc finger protein that antagonizes Msx1-mediated activation of odontogenic mesenchyme, was significantly upregulated in the molar tooth mesenchyme in Bmp4f/f;Wnt1Cre embryos. Msx1 heterozygosity enhanced maxillary molar developmental defects whereas Osr2 heterozygosity partially rescued mandibular first molar morphogenesis in Bmp4f/f;Wnt1Cre mice. Moreover, in contrast to complete lack of supernumerary tooth initiation in Msx1–/–Osr2–/– mice, Osr2–/–Bmp4f/f;Wnt1Cre compound mutant mice exhibited formation and subsequent arrest of supernumerary tooth germs that correlated with downregulation of Msx1 expression in the tooth mesenchyme. In addition, we found that the Wnt inhibitors Dkk2 and Wif1 were much more abundantly expressed in the mandibular than maxillary molar mesenchyme in wild-type embryos and that Dkk2 expression was significantly upregulated in the molar mesenchyme in Bmp4f/f;Wnt1Cre embryos, which correlated with the dramatic differences in maxillary and mandibular molar phenotypes in Bmp4f/f;Wnt1Cre mice. Together, these data indicate that Bmp4 signaling suppresses tooth developmental inhibitors in the tooth mesenchyme, including Dkk2 and Osr2, and synergizes with Msx1 to activate mesenchymal odontogenic potential for tooth morphogenesis and sequential tooth formation. PMID:23250216

  12. Regenerative Applications Using Tooth Derived Stem Cells in Other Than Tooth Regeneration: A Literature Review

    OpenAIRE

    2016-01-01

    Tooth derived stem cells or dental stem cells are categorized according to the location from which they are isolated and represent a promising source of cells for regenerative medicine. Originally, as one kind of mesenchymal stem cells, they are considered an alternative of bone marrow stromal cells. They share many commonalties but maintain differences. Considering their original function in development and the homeostasis of tooth structures, many applications of these cells in dentistry ha...

  13. Ulnar head replacement.

    Science.gov (United States)

    Herbert, Timothy J; van Schoonhoven, Joerg

    2007-03-01

    Recent years have seen an increasing awareness of the anatomical and biomechanical significance of the distal radioulnar joint (DRUJ). With this has come a more critical approach to surgical management of DRUJ disorders and a realization that all forms of "excision arthroplasty" can only restore forearm rotation at the expense of forearm stability. This, in turn, has led to renewed interest in prosthetic replacement of the ulnar head, a procedure that had previously fallen into disrepute because of material failures with early implants, in particular, the Swanson silicone ulnar head replacement. In response to these early failures, a new prosthesis was developed in the early 1990s, using materials designed to withstand the loads across the DRUJ associated with normal functional use of the upper limb. Released onto the market in 1995 (Herbert ulnar head prosthesis), clinical experience during the last 10 years has shown that this prosthesis is able to restore forearm function after ulnar head excision and that the materials (ceramic head and noncemented titanium stem), even with normal use of the limb, are showing no signs of failure in the medium to long term. As experience with the use of an ulnar head prosthesis grows, so does its acceptance as a viable and attractive alternative to more traditional operations, such as the Darrach and Sauve-Kapandji procedures. This article discusses the current indications and contraindications for ulnar head replacement and details the surgical procedure, rehabilitation, and likely outcomes.

  14. Nonalimentary tooth use in the neolithic population of the Lengyel culture in central Poland (4600-4000 BC).

    Science.gov (United States)

    Lorkiewicz, Wiesław

    2011-04-01

    One hundred and four skeletons of adult individuals representing Neolithic populations of the Brześć Kujawski group of the Lengyel Culture (Kuyavia, central Poland, 4600-4000 BC) were analyzed with regard to evidence of nonalimentary tooth use, periapical lesions and antemortem tooth loss (AMTL). Instances of nonalimentary behaviors were found in 47.1% of females and 27.5% of males. Females were primarily characterized by occlusal grooves on the incisors and canines, most probably resulting from yarn production or weaving. The most frequent defect in males was severe tooth wear extending from the incisors to first molars, caused by some hard-to-identify nonalimentary activities. Occlusal grooves were also found in males, but their morphology indicates processing of some coarser material. The occupational nature of the tooth defects has been confirmed by archaeological data. The only two burials with grave goods indicative of craft specialization at the sites studied contain the remains of individuals with marks of nonalimentary tooth use. Moreover, the sites provide unequivocal evidence of weaving and basketry production in the form of loom weights and imprints of cloth and mats. Periapical lesions have been found in 40.4% of males and 35.6% of females, and AMTL in 32.1% of males and 36.7% of females. Individuals with evidence of nonalimentary tooth wear are characterized both by a higher incidence of these lesions in general, and by their more frequent location in the anterior part of the alveolar arch.

  15. Bodybuilding supplementation and tooth decay.

    Science.gov (United States)

    Ali, M S; Batley, H; Ahmed, F

    2015-07-10

    Supplementation is a key component in bodybuilding and is increasingly being used by amateur weight lifters and enthusiasts to build their ideal bodies. Bodybuilding supplements are advertised to provide nutrients needed to help optimise muscle building but they can contain high amounts of sugar. Supplement users are consuming these products, while not being aware of their high sugar content, putting them at a higher risk of developing dental caries. It is important for dental professionals to recognise the increased risk for supplement users and to raise awareness, provide appropriate preventative advice and be knowledgeable of alternative products to help bodybuilders reach their goals, without increasing the risk of dental caries.

  16. Implant-supported single-tooth restorations: a 5-year prospective study.

    Science.gov (United States)

    Wennström, Jan L; Ekestubbe, Annika; Gröndahl, Kerstin; Karlsson, Stig; Lindhe, Jan

    2005-06-01

    Comparatively few studies are available reporting at least 5 years of follow-up data of implant-supported single-tooth replacements. To evaluate prospectively the 5-year outcome of implant-supported single-tooth prosthetic restorations. Forty subjects (mean age 41 years), 23 males and 17 females, who required single-tooth prosthetic replacement for a missing tooth were recruited. A total of 45 self-tapping implants (Astra Tech ST-implants)--40 in the maxilla and five in the mandible--were installed in a two-stage procedure. Abutment connection was performed 3-6 months after implant installation. Clinical and radiographic examinations were performed at the completion of the prosthetic treatment and once a year during a 5-year follow-up period. The analysis of peri-implant bone level alteration was performed on subject and implant levels and by the use of analysis of variance and binary logistic regression. Three patients were lost during the 5 years of follow-up. One implant was lost after 2.5 years in function and another four implants could not be accounted for at the 5-year follow-up examination. The overall failure rate at 5 years was 2.6% (subject level) and 2.3% (implant level). The mean loss of marginal bone at the implants during the first year in function was 0.06 mm (SD 0.67) on the subject level and 0.02 mm (0.65) on the implant level. During the subsequent 4 years the annual change in peri-implant bone level amounted to -0.02 mm (0.22) on both subject and implant levels. Thus, the mean total bone level change over the 5-year interval was -0.14 mm (1.04) on subject level and -0.11 mm (1.00) on the implant level of analysis (p>0.05). The frequency of implants with a 5-year bone loss of > or =1 mm was 13%. Approximately 50% of the implants demonstrated no bone loss. The present clinical trial on single-tooth replacements with the Astra Tech implant system demonstrated that the bone loss during the first year of function as well as annually thereafter was

  17. THE REPLACEMENT-RENEWAL OF INDUSTRIAL EQUIPMENTS. THE MAPI FORMULAS

    Directory of Open Access Journals (Sweden)

    Meo Colombo Carlotta

    2010-07-01

    Full Text Available Since the production has been found to be an economical means for satisfying human wants, this process requires a complex industrial organization together with a large investment in equipments, plants and productive systems. These productive systems are employed to alter the physical environment and create consumer goods. As a result, they are consumed or become obsolete, inadequate, or otherwise candidates for replacement. When replacement is being considered, two assets must be evaluated: the present asset, the defender and its potential replacement, the challenger. Since the success of an industrial organization depends upon profit, replacement should generally occur if an economic advantage will result. Whatever the reason leading to the consideration of replacement, the analysis and decisions must be based upon estimates of what will occur in the future. In this paper we present the Mapi algorithm as a procedure for evaluating investments or for analyzing replacement opportunities.

  18. Analysis of the soluble human tooth proteome and its ability to induce dentin/tooth regeneration.

    Science.gov (United States)

    Chun, So Young; Lee, Hyo Jung; Choi, Young Ae; Kim, Kyung Min; Baek, Sang Heum; Park, Hyo Sang; Kim, Jae-Young; Ahn, Jung-Mo; Cho, Je-Yeol; Cho, Dong-Woo; Shin, Hong-In; Park, Eui Kyun

    2011-01-01

    While the soluble proteins of human teeth consist of various extracellular matrix and bioactive proteins, they have not yet been characterized fully. Moreover, the role they play in tooth regeneration is not clear. Analysis of the soluble proteins in human teeth by liquid chromatography-mass spectrometry revealed 147 different ethylenediaminetetraacetic acid-soluble tooth proteins (ESTPs). Of these, 29 had not been shown previously to be present in human teeth. To determine their effect on the in vitro responses of dental pulp stem cells (DPSCs), DPSCs were cultured in ESTP-coated culture plates and three-dimensional scaffolds. The ESTPs significantly enhanced DPSC odontoblast differentiation and mineralization in vitro, but had only partial effect on bone marrow stem cells or adipose tissue stem cells. To test the effect of ESTPs on in vivo dentin and tooth formation, mouse embryonic tooth-forming primordia and xenogenic murine apical bud epithelium/human DPSC composites were treated with ESTPs before implantation under the renal capsule of ICR mice. ESTP treatment promoted the formation of morphologically normal teeth by the tooth-forming primordium regions and enhanced the development of a regular and large dentin structure by the composites. These observations suggest that human ESTPs contain dentinogenic proteins and can promote dentin and tooth formation.

  19. Moessbauer Studies of Stannous Fluoride Reactivity with Synthetic Tooth Enamel - A Model for the Tooth Cavity Protection Actions of Novel Dentifrices

    Energy Technology Data Exchange (ETDEWEB)

    Denes, Georges, E-mail: gdenes@vax2.concordia.ca; Muntasar, Abdualhafeed [Concordia University, Laboratory of Moessbauer Spectroscopy and Solid State Chemistry, Laboratories for Inorganic Materials, Department of Chemistry and Biochemistry (Canada); Kozak, Kathy M.; Baig, Arif A.; White, Donald J. [Procter and Gamble Company (United States)

    2002-06-15

    SnF{sub 2} is an important toothpaste ingredient, added for the provision of clinical efficacy for hard and soft tissue diseases and in breath protection. Synthetic calcium hydroxyapatite powders were exposed to liquid supernates (25 w/w% toothpaste water slurries, centrifuged) of Crest Gum Care (registered) (SnF{sub 2}) dentifrice. One-minute treatments were followed by 3x water washing, centrifugation and lyophilization. Post treatment, powders were analyzed by Moessbauer spectroscopy with 0.5-1 gram of treated apatite powder. Results show that tooth mineral stannous fluoride interactions include: (1) formation of surface reaction products with both Sn(II) and Sn(IV) oxidation states; (2) Sn-F binding on mineral surfaces with no evidence of SnO. The surface binding is, however, not pure Sn-F but contains contributions of other ligands, probably oxygens from surface phosphates or hydroxyl groups. Results also suggest that surface reacted stannous tin is oxidized with time, even when bound as a layer on the tooth surface. This study demonstrates for the first time the presence of Sn-F on tooth enamel post treatment and the contribution of passivation to long term stannous chemistry on tooth surfaces. The study also illustrates the practical applications of the Moessbauer technique.

  20. Is tooth wear in the primary dentition predictive of tooth wear in the permanent dentition? Report from a longitudinal study.

    LENUS (Irish Health Repository)

    Harding, M A

    2010-03-01

    To determine the prevalence of tooth wear in the permanent dentition of a sample of 12-year-old school children and establish whether an association exists between tooth wear recorded now and tooth wear recorded in their primary dentition at age five.

  1. Replacement of Missing Anterior Teeth in a Patient with Chronic Mouth Breathing and Tongue Thrusting

    Directory of Open Access Journals (Sweden)

    Satheesh B. Haralur

    2013-01-01

    Full Text Available The loss of anterior teeth has serious functional, esthetic disabilities, in addition to compromising the patients' quality of life. Various etiologies can be attributed to the anterior tooth loss, including trauma, caries, and periodontal diseases. The chronic mouth breathing due to nasal adenoids is known to enhance the gingival and periodontal diseases. The dental literature proves the association of nasal breathing, tongue thrusting, and anterior open bite. Arch shape and tooth position are primarily determined by the equilibrium of the forces from tongue and perioral musculature. Increased force from tongue musculature in the tongue thrusting patient leads to flaring of anterior teeth, making them susceptible for periodontal and traumatic tooth loss. Replacement of the anterior teeth in this patient will also help in restoration of anterior guidance, which is critical for the health of temporomandibular joint, posterior teeth, and musculature.

  2. Replacement of missing anterior teeth in a patient with chronic mouth breathing and tongue thrusting.

    Science.gov (United States)

    Haralur, Satheesh B; Al-Qahtani, Ali Saad

    2013-01-01

    The loss of anterior teeth has serious functional, esthetic disabilities, in addition to compromising the patients' quality of life. Various etiologies can be attributed to the anterior tooth loss, including trauma, caries, and periodontal diseases. The chronic mouth breathing due to nasal adenoids is known to enhance the gingival and periodontal diseases. The dental literature proves the association of nasal breathing, tongue thrusting, and anterior open bite. Arch shape and tooth position are primarily determined by the equilibrium of the forces from tongue and perioral musculature. Increased force from tongue musculature in the tongue thrusting patient leads to flaring of anterior teeth, making them susceptible for periodontal and traumatic tooth loss. Replacement of the anterior teeth in this patient will also help in restoration of anterior guidance, which is critical for the health of temporomandibular joint, posterior teeth, and musculature.

  3. [A new method for combined auto-alloplastic tooth reimplantation with a parallel A1203-ceramic root].

    Science.gov (United States)

    Kirschner, H; Bolz, U; Enomoto, S; Hüttemann, R W; Meinel, W; Sturm, J

    1978-09-01

    The operative procedure for partially replacing the root with A12O3 ceramic represents a good possibility for preserving teeth in which the pulpa is devitalized. The method used in connection with the well known autoplastic reimplantation not only presents an alternative to the traditional apicoectomy but also provides additional stabilization of the tooth by lengthing the root with cocotostabile and biocompatible A1203 ceramic. The method was tested in humans and monkeys. Argumentation was based on histological examination via light microscopy.

  4. Prevention of dental anomalies in children by prosthetics defects hard tooth tissues and dentitions: the need to possibilities

    OpenAIRE

    Suetenkov D.Ye.; Pudovkina Е.А.; Venatovskaya N.V.; Proshin A.G.

    2011-01-01

    This article presents the possibility of restore the function and anatomy of the tooth and replacement of defects of dentition by prosthesis in children under the removable bite as a method of prevention of dentoalveolar anomalies. Identified the need for prosthetic treatment of children and the willingness of dentists as primary health care professional to address the problems identified. A clinical analysis of complex treatment of defects in the teeth with fixed restorations

  5. Prevention of dental anomalies in children by prosthetics defects hard tooth tissues and dentitions: the need to possibilities

    Directory of Open Access Journals (Sweden)

    Suetenkov D.Ye.

    2011-03-01

    Full Text Available This article presents the possibility of restore the function and anatomy of the tooth and replacement of defects of dentition by prosthesis in children under the removable bite as a method of prevention of dentoalveolar anomalies. Identified the need for prosthetic treatment of children and the willingness of dentists as primary health care professional to address the problems identified. A clinical analysis of complex treatment of defects in the teeth with fixed restorations

  6. A TOOTH TATTOO WITH A PURPOSE: AN INNOVATIVE APPROACH

    Directory of Open Access Journals (Sweden)

    Neetu

    2014-01-01

    Full Text Available Skin is not the only place that can be decorated with a tattoo. You can decorate your tooth with amazing tattoos. Tooth tattoos and tooth jewels have become one of the hottest fashion trends , and a very popular arrival in cosmetic dentistry. But won’t it be a boon if it had some preventive or medicinal v alue. Yes tooth tattoos can act as indicators of once illness. These tiny electronic sensors can diagnose illnesses by 'tasting' your breath. This paper is an insight into how a tooth tattoos can pick up early warning signs of sickness or infection by bact eria in people's breath.

  7. Tooth regeneration: challenges and opportunities for biomedical material research.

    Science.gov (United States)

    Du, Chang; Moradian-Oldak, Janet

    2006-03-01

    Tooth regeneration presents many challenges to researchers in the fields of biology, medicine and material science. This review considers the opportunities for biomedical material research to contribute to this multidisciplinary endeavor. We present short summaries and an overview on the collective knowledge of tooth developmental biology, advances in stem-cell research, and progress in the understanding of the tooth biomineralization principles as they provide the foundation for developing strategies for reparative and regenerative medicine. We emphasize that various biomaterials developed via biomimetic strategies have great potential for tooth tissue engineering and regeneration applications. The current practices in tooth tissue engineering approaches and applications of biomimetic carriers or scaffolds are also discussed.

  8. Strategic vehicle fleet management - the replacement problem

    Directory of Open Access Journals (Sweden)

    Adam Redmer

    2016-03-01

    Full Text Available Background: Fleets constitute the most important production means in transportation. Their appropriate management is crucial for all companies having transportation duties. The paper is the third one of a series of three papers that the author dedicates to the strategic vehicle fleet management topic. Material and methods: The paper discusses ways of building replacement strategies for companies' fleets of vehicles. It means deciding for how long to exploit particular vehicles in a fleet (the fleet replacement problem - FR. The essence of this problem lies in the minimization of vehicle / fleet exploitation costs by balancing ownership and utilization costs and taking into account budget limitations. In the paper an original mathematical model (an optimization method allowing for the FR analysis is proposed. Results: An application of the proposed optimization method in a real-life decision situation (the case study within the Polish environment and the obtained solution are presented. The solution shows that there exist optimal exploitation periods of particular vehicles in a fleet. However, combination of them gives a replacement plan for an entire fleet violating budget constraints. But it is possible to adjust individual age to replacement of particular vehicles to fulfill budget constraints without losing economical optimality of a developed replacement plan for an entire fleet. Conclusions: The paper is the last one of a series of three papers that the author dedicated to the strategic vehicle fleet management topic including the following managerial decision problems: MAKE-or-BUY, sizing / composition and replacement.

  9. 'Split posterior tooth': conservative clinical re-attachment.

    Science.gov (United States)

    Abraham, Sathish; Chacko, Lisa Neelathil

    2014-07-30

    Trauma is the prime causative factor for fracture of teeth/dentition. Many procedural management options are followed successfully in relation to the anterior teeth. However, most posterior cases where the tooth is fractured have only limited options to pursue to save the tooth. Fractured teeth, whether they are vital/non-vital, are predominantly managed with surgical options. This paper discusses a conservative approach to reattaching a split posterior tooth. A split tooth situation is mostly an absolute indication for extraction, but the clinician may go in for extensive surgical procedures if he/she wishes to save it. The reattachment of the tooth can be successfully done and it can be put to function. This paper discusses how a split posterior tooth can be treated successfully, although depending on multiple factors. A full crown cemented after successful reattachment and root canal therapy would provide sufficient support in order for the tooth to heal.

  10. Multilobed mesiodens: a supernumerary tooth with unusual morphology.

    Science.gov (United States)

    Dave, Bhavna; Patel, Jalark; Swadas, Milan; Mallikarjuna, Rachappa

    2013-02-06

    An 8-year-old boy came with a chief complaint of an abnormally shaped tooth situated in upper front teeth region. On examination a supernumerary tooth with multiple lobes was present palatally to the maxillary right permanent central incisor. The morphology of the tooth crown was found to be unusual due to the presence of five lobes in the crown portion. Because of the supernumerary tooth, the permanent right central incisor was displaced labially. Radiographic examination showed a completely formed supernumerary tooth with dilacerated root. On the basis of clinical and radiographic examination, the supernumerary tooth was diagnosed as multilobed mesiodens. Since patient expressed dissatisfaction with the presence of supernumerary tooth, it was decided to extract this mesiodens followed by orthodontic treatment for alignment of labially placed maxillary right permanent central incisor.

  11. Aortic valve replacement

    DEFF Research Database (Denmark)

    Kapetanakis, Emmanouil I; Athanasiou, Thanos; Mestres, Carlos A

    2008-01-01

    BACKGROUND AND AIMS OF THE STUDY: Prompted by anecdotal evidence and observations by surgeons, an investigation was undertaken into the potential differences in implanted aortic valve prosthesis sizes, during aortic valve replacement (AVR) procedures, between northern and southern European...... countries. METHODS: A multi-institutional, non-randomized, retrospective analysis was conducted among 2,932 patients who underwent AVR surgery at seven tertiary cardiac surgery centers throughout Europe. Demographic and perioperative variables including valve size and type, body surface area (BSA) and early...

  12. Total ankle joint replacement.

    Science.gov (United States)

    2016-02-01

    Ankle arthritis results in a stiff and painful ankle and can be a major cause of disability. For people with end-stage ankle arthritis, arthrodesis (ankle fusion) is effective at reducing pain in the shorter term, but results in a fixed joint, and over time the loss of mobility places stress on other joints in the foot that may lead to arthritis, pain and dysfunction. Another option is to perform a total ankle joint replacement, with the aim of giving the patient a mobile and pain-free ankle. In this article we review the efficacy of this procedure, including how it compares to ankle arthrodesis, and consider the indications and complications.

  13. The Optimum Replacement of Weapon

    Institute of Scientific and Technical Information of China (English)

    ZHANG Xiao; ZHANG Jin-chun

    2002-01-01

    The theory of LCC (Life Cycle Cost) is applied in this paper. The relation between the economic life of weapon and the optimum replacement is analyzed. The method to define the optimum replacement time of weapon is discussed.

  14. Total disc replacement.

    Science.gov (United States)

    Vital, J-M; Boissière, L

    2014-02-01

    Total disc replacement (TDR) (partial disc replacement will not be described) has been used in the lumbar spine since the 1980s, and more recently in the cervical spine. Although the biomechanical concepts are the same and both are inserted through an anterior approach, lumbar TDR is conventionally indicated for chronic low back pain, whereas cervical TDR is used for soft discal hernia resulting in cervicobrachial neuralgia. The insertion technique must be rigorous, with precise centering in the disc space, taking account of vascular anatomy, which is more complex in the lumbar region, particularly proximally to L5-S1. All of the numerous studies, including prospective randomized comparative trials, have demonstrated non-inferiority to fusion, or even short-term superiority regarding speed of improvement. The main implant-related complication is bridging heterotopic ossification with resulting loss of range of motion and increased rates of adjacent segment degeneration, although with an incidence lower than after arthrodesis. A sufficiently long follow-up, which has not yet been reached, will be necessary to establish definitively an advantage for TDR, particularly in the cervical spine. Copyright © 2014 Elsevier Masson SAS. All rights reserved.

  15. REPLACEMENT OF FRENCH CARDS

    CERN Multimedia

    HR/SOC

    2001-01-01

    The French Ministry of Foreign Affairs has informed the Organization that it is shortly to replace all diplomatic cards, special cards and employment permits ('attestations de fonctions') now held by members of the personnel and their families. Between 2 July and 31 December 2001, these cards are to be replaced by secure, computerized equivalents. The old cards may continue to be used until 31 December 2001. For the purposes of the handover, members of the personnel must go personally to the cards office (33/1-015), in order to fill in a 'fiche individuelle' form, taking the following documents for themselves and members of their families already in possession of a French card : A recent identity photograph in 4.5 cm x 3.5 cm format. The French card in their possession. An A4 photocopy of the same French card, certified by the cards office as being a true copy. Those members of the personnel whose cards (and/or cards belonging to members of their families) are shortly due to expire, or have recently done...

  16. REPLACEMENT OF FRENCH CARDS

    CERN Multimedia

    Human Resources Division; Cards.Service@cern.ch

    2001-01-01

    The French Ministry of Foreign Affairs is currently replacing all diplomatic cards, special cards and employment permits («attestations de fonctions») held by members of the personnel and their families. These cards are replaced by secure, computerized equivalents. The old cards may no longer be used after 31 December 2001. For the purposes of the handover, members of the personnel must go personally to the cards office (33/1-015) between 8h30 and 12h30, in order to fill in a «fiche individuelle» form, taking the following documents for themselves and members of their families already in possession of a French card : A recent identity photograph in 4.5 cm x 3.5 cm format, the French card in their possession, an A4 photocopy of the same French card, certified by the cards office as being a true copy. Those members of the personnel whose cards (and/or cards belonging to members of their families) are shortly due to expire, or have recently done so, are also requested...

  17. REPLACEMENT OF FRENCH CARDS

    CERN Multimedia

    Human Resources Division

    2001-01-01

    The French Ministry of Foreign Affairs has informed the Organization that it is shortly to replace all diplomatic cards, special cards and employment permits ('attestations de fonctions') now held by members of the personnel and their families. Between 2 July and 31 December 2001, these cards are to be replaced by secure, computerized equivalents. The old cards may continue to be used until 31 December 2001. For the purposes of the handover, members of the personnel are asked to go to the cards office (33/1-015), taking the following documents for themselves and members of their families already in possession of a French card : A recent identity photograph in 4.5 cm x 3.5 cm format, The French card in their possession, an A4 photocopy of the same French card, certified by the cards office as being a true copy. Those members of the personnel whose cards (and/or cards belonging to members of their families) are shortly due to expire, or have recently done so, are also requested to take these items to the c...

  18. REPLACEMENT OF FRENCH CARDS

    CERN Multimedia

    Human Resources Division

    2001-01-01

    The French Ministry of Foreign Affairs has informed the Organization that it is shortly to replace all diplomatic cards, special cards and employment permits ('attestations de fonctions') now held by members of the personnel and their families. Between 2 July and 31 December 2001, these cards are to be replaced by secure, computerized equivalents. A 'personnel office' stamped photocopy of the old cards may continue to be used until 31 December 2001. For the purposes of the handover, members of the personnel must go personally to the cards office (33/1-015), between 8:30 and 12:30, in order to fill a 'fiche individuelle' form (in black ink only), which has to be personally signed by themselves and another separately signed by members of their family, taking the following documents for themselves and members of their families already in possession of a French card : A recent identity photograph in 4.5 cm x 3.5 cm format (signed on the back) The French card in their possession an A4 photocopy of the same Fre...

  19. Faster Replacement Paths

    CERN Document Server

    Williams, Virginia Vassilevska

    2010-01-01

    The replacement paths problem for directed graphs is to find for given nodes s and t and every edge e on the shortest path between them, the shortest path between s and t which avoids e. For unweighted directed graphs on n vertices, the best known algorithm runtime was \\tilde{O}(n^{2.5}) by Roditty and Zwick. For graphs with integer weights in {-M,...,M}, Weimann and Yuster recently showed that one can use fast matrix multiplication and solve the problem in O(Mn^{2.584}) time, a runtime which would be O(Mn^{2.33}) if the exponent \\omega of matrix multiplication is 2. We improve both of these algorithms. Our new algorithm also relies on fast matrix multiplication and runs in O(M n^{\\omega} polylog(n)) time if \\omega>2 and O(n^{2+\\eps}) for any \\eps>0 if \\omega=2. Our result shows that, at least for small integer weights, the replacement paths problem in directed graphs may be easier than the related all pairs shortest paths problem in directed graphs, as the current best runtime for the latter is \\Omega(n^{2.5...

  20. Squalicorax Chips a Tooth: A Consequence of Feeding-Related Behavior from the Lowermost Navesink Formation (Late Cretaceous: Campanian-Maastrichtian of Monmouth County, New Jersey, USA

    Directory of Open Access Journals (Sweden)

    John A. Chamberlain

    2012-05-01

    Full Text Available Chipped and broken functional teeth are common in modern sharks with serrated tooth shape. Tooth damage consists of splintering, cracking, and flaking near the cusp apex where the enameloid is broken and exposes the osteodentine and orthodentine. Such damage is generally viewed as the result of forces applied during feeding as the cusp apex impacts the skeletal anatomy of prey. Damage seen in serrated functional teeth from sharks Squalicorax kaupi [1] and Squalicorax pristodontus [1] from the late Cretaceous lowermost Navesink Formation of New Jersey resembles that occurring in modern sharks and suggests similar feeding behavior. Tumbling experiments using serrated modern and fossil functional shark teeth, including those of Squalicorax, show that teeth are polished, not cracked or broken, by post-mortem abrasion in lowermost Navesink sediment. This provides further evidence that chipped and broken Squalicorax teeth are feeding-related and not taphonomic in origin. Evolution of rapid tooth replacement in large sharks such as Squalicorax ensured maximum functionality after feeding-related tooth damage occurred. Serrated teeth and rapid tooth replacement in the large sharks of the Mesozoic and Cenozoic afforded them competitive advantages that helped them to achieve their place as apex predators in today’s ocean.

  1. New method of control of tooth whitening

    Science.gov (United States)

    Angelov, I.; Mantareva, V.; Gisbrecht, A.; Valkanov, S.; Uzunov, Tz.

    2010-10-01

    New methods of control of tooth bleaching stages through simultaneous measurements of a reflected light and a fluorescence signal are proposed. It is shown that the bleaching process leads to significant changes in the intensity of a scattered signal and also in the shape and intensity of the fluorescence spectra. Experimental data illustrate that the bleaching process causes essential changes in the teeth discoloration in short time as 8-10 min from the beginning of the application procedure. The continuation of the treatment is not necessary moreover the probability of the enamel destroy increases considerably. The proposed optical back control of tooth surface is a base for development of a practical set up to control the duration of the bleaching procedure.

  2. Distribution of amelotin in mouse tooth development.

    Science.gov (United States)

    Gao, Yuguang; Wang, Wanchun; Sun, Yan; Zhang, Juanjuan; Li, Dongliang; Wei, Yahong; Han, Tingting

    2010-01-01

    Amelotin is expressed and secreted by ameloblasts in tooth development, but amelotin distribution during enamel development is not clear. In this report, we first investigated amelotin expression in developing teeth by immunohistochemistry. Amelotin was detected in the enamel matrix at the secretion and maturation stages of enamel development. Amelotin was also observed at Tomes' processes on the apical ends of secretory ameloblasts. We then compared amelotin gene expression with those of amelogenin, enamelin, and ameloblastin in the mandibles of postnatal mice by RT-PCR. The expression of amelotin was detected as early as in postnatal day 0 mandibles and amelotin was coexpressed with amelogenin, ameloblastin, and enamelin during tooth development. These data strongly suggest that amelotin is an enamel matrix protein expressed at the secretion and maturation stages of enamel development. (c) 2009 Wiley-Liss, Inc.

  3. Two stage gear tooth dynamics program

    Science.gov (United States)

    Boyd, Linda S.

    1989-01-01

    The epicyclic gear dynamics program was expanded to add the option of evaluating the tooth pair dynamics for two epicyclic gear stages with peripheral components. This was a practical extension to the program as multiple gear stages are often used for speed reduction, space, weight, and/or auxiliary units. The option was developed for either stage to be a basic planetary, star, single external-external mesh, or single external-internal mesh. The two stage system allows for modeling of the peripherals with an input mass and shaft, an output mass and shaft, and a connecting shaft. Execution of the initial test case indicated an instability in the solution with the tooth paid loads growing to excessive magnitudes. A procedure to trace the instability is recommended as well as a method of reducing the program's computation time by reducing the number of boundary condition iterations.

  4. Tooth in Ethmoid Sinus: A Case Report

    Directory of Open Access Journals (Sweden)

    Tayebe Kazemei

    2009-09-01

    Full Text Available Ectopic eruption of teeth occurs in a variety of locations.Commonly seen in palate and maxillary sinus, they have alsobeen reported in nasal cavity, orbit, mandibular condyle,coronoid process, and facial skin.Here, we report a rare case of recurrent sinusitis caused byectopic tooth in right ethmoid sinus and successful endoscopicremoval of it. The symptoms of the patient disappeared aftersurgery. Such case has not been yet reported in the Englishliterature.Ectopic tooth is an uncommon cause of sinusitis. It shouldbe considered in patients presenting with recurrent sinusitis unresponsiveto medical treatment. Computed tomography of thesinuses is the modality of choice for diagnosis. Endoscopic sinussurgery is the best method for management of such cases.

  5. Expression of Sox genes in tooth development.

    Science.gov (United States)

    Kawasaki, Katsushige; Kawasaki, Maiko; Watanabe, Momoko; Idrus, Erik; Nagai, Takahiro; Oommen, Shelly; Maeda, Takeyasu; Hagiwara, Nobuko; Que, Jianwen; Sharpe, Paul T; Ohazama, Atsushi

    2015-01-01

    Members of the Sox gene family play roles in many biological processes including organogenesis. We carried out comparative in situ hybridization analysis of seventeen sox genes (Sox1-14, 17, 18, 21) during murine odontogenesis from the epithelial thickening to the cytodifferentiation stages. Localized expression of five Sox genes (Sox6, 9, 13, 14 and 21) was observed in tooth bud epithelium. Sox13 showed restricted expression in the primary enamel knots. At the early bell stage, three Sox genes (Sox8, 11, 17 and 21) were expressed in pre-ameloblasts, whereas two others (Sox5 and 18) showed expression in odontoblasts. Sox genes thus showed a dynamic spatio-temporal expression during tooth development.

  6. Interdisciplinary management of single-tooth implants.

    Science.gov (United States)

    Spear, F M; Mathews, D M; Kokich, V G

    1997-03-01

    Orthodontists treat many patients who are missing maxillary lateral incisors and/or mandibular second premolars. In the past, if the canines could not be substituted for lateral incisors, conventional full-coverage bridges were the common restoration. Recently, resin-bonded Maryland bridges became a popular substitute for conventional bridges to avoid crowns on the nonrestored abutments. However, resin-bonded bridges have a poor long-term prognosis for retention, lasting on average about 10 years. Since implants were introduced into dentistry by Swedish researchers in the mid-1980s, they have become a promising substitute for conventional or resin-bonded bridges. However, to successfully place and restore single-tooth implants in young orthodontic patients several questions must be answered. This article will discuss the many interdisciplinary issues that are involved in placing and restoring single-tooth implants in orthodontic patients.

  7. Esthetics and vertical tooth position: orthodontic possibilities.

    Science.gov (United States)

    Kokich, V G

    1997-12-01

    Throughout the 1990s, esthetic dentistry has become a prominent part of the treatment protocol of most dentists. Patients have become more conscious of the benefits of a beautiful smile and are willing to invest time and money to improve the appearance of their teeth. Many of these patients can be treated with routine restorative procedures (crowns, composites, laminates) to achieve the desired results. However, some patients have problems with tooth position that create significant discrepancies in gingival levels which can compromise the esthetic result of restorative dentistry. Prerestorative orthodontic therapy can often resolve these tooth position problems and enhance the esthetic restoration. This article describes the indication, methods, and results achieved when orthodontics preceded restorative dentistry in the treatment of various esthetic challenges.

  8. Non-surgical management of tooth hypersensitivity.

    Science.gov (United States)

    Clark, Danielle; Levin, Liran

    2016-10-01

    Tooth sensitivity is a common complaint of patients in dental practices. Studies have demonstrated dentinal hypersensitivity to affect 10-30% of the population. There are various potential causes of tooth sensitivity and a variety of available treatment options. This narrative review will discuss the possible aetiology of this condition, as well as the treatment modalities available. A tailor-made treatment plan that starts with the most non-invasive treatment options and escalates only when those options have proven insufficient in alleviating symptoms should be provided for each patient. Only after all non- and less-invasive methods have failed to reduce the symptoms should more invasive treatment options, such as root-coverage, be considered.

  9. Expression of Sox genes in tooth development

    Science.gov (United States)

    KAWASAKI, KATSUSHIGE; KAWASAKI, MAIKO; WATANABE, MOMOKO; IDRUS, ERIK; NAGAI, TAKAHIRO; OOMMEN, SHELLY; MAEDA, TAKEYASU; HAGIWARA, NOBUKO; QUE, JIANWEN; SHARPE, PAUL T.; OHAZAMA, ATSUSHI

    2017-01-01

    Members of the Sox gene family play roles in many biological processes including organogenesis. We carried out comparative in situ hybridization analysis of seventeen sox genes (Sox1-14, 17, 18, 21) during murine odontogenesis from the epithelial thickening to the cytodifferentiation stages. Localized expression of five Sox genes (Sox6, 9, 13, 14 and 21) was observed in tooth bud epithelium. Sox13 showed restricted expression in the primary enamel knots. At the early bell stage, three Sox genes (Sox8, 11, 17 and 21) were expressed in pre-ameloblasts, whereas two others (Sox5 and 18) showed expression in odontoblasts. Sox genes thus showed a dynamic spatio-temporal expression during tooth development. PMID:26864488

  10. Frictional Effects on Gear Tooth Contact Analysis

    OpenAIRE

    Zheng Li; Ken Mao

    2013-01-01

    The present paper concentrates on the investigations regarding the situations of frictional shear stress of gear teeth and the relevant frictional effects on bending stresses and transmission error in gear meshing. Sliding friction is one of the major reasons causing gear failure and vibration; the adequate consideration of frictional effects is essential for understanding gear contact behavior accurately. An analysis of tooth frictional effect on gear performance in spur gear is presented us...

  11. Bivalent histone modifications during tooth development

    Institute of Scientific and Technical Information of China (English)

    Li-Wei Zheng; Bin-Peng Zhang; Ruo-Shi Xu; Xin Xu; Ling Ye; Xue-Dong Zhou

    2014-01-01

    Histone methylation is one of the most widely studied post-transcriptional modifications. It is thought to be an important epigenetic event that is closely associated with cell fate determination and differentiation. To explore the spatiotemporal expression of histone H3 lysine 4 trimethylation (H3K4me3) and histone H3 lysine 27 trimethylation (H3K27me3) epigenetic marks and methylation or demethylation transferases in tooth organ development, we measured the expression of SET7, EZH2, KDM5B and JMJD3 via immunohistochemistry and quantitative polymerase chain reaction (qPCR) analysis in the first molar of BALB/c mice embryos at E13.5, E15.5, E17.5, P0 and P3, respectively. We also measured the expression of H3K4me3 and H3K27me3 with immunofluorescence staining. During murine tooth germ development, methylation or demethylation transferases were expressed in a spatial–temporal manner. The bivalent modification characterized by H3K4me3 and H3K27me3 can be found during the tooth germ development, as shown by immunofluorescence. The expression of SET7, EZH2 as methylation transferases and KDM5B and JMJD3 as demethylation transferases indicated accordingly with the expression of H3K4me3 and H3K27me3 respectively to some extent. The bivalent histone may play a critical role in tooth organ development via the regulation of cell differentiation.

  12. Iatrogenic traumatic brain injury during tooth extraction.

    Science.gov (United States)

    Troxel, Mark

    2015-01-01

    An 8 yr old spayed female Yorkshire terrier was referred for evaluation of progressive neurological signs after a routine dental prophylaxis with tooth extractions. The patient was circling to the left and blind in the right eye with right hemiparesis. Neurolocalization was to the left forebrain. MRI revealed a linear tract extending from the caudal oropharynx, through the left retrobulbar space and frontal lobe, into the left parietal lobe. A small skull fracture was identified in the frontal bone through which the linear tract passed. Those findings were consistent with iatrogenic trauma from slippage of a dental elevator during extraction of tooth 210. The dog was treated empirically with clindamycin. The patient regained most of its normal neurological function within the first 4 mo after the initial injury. Although still not normal, the dog has a good quality of life. Traumatic brain injury is a rarely reported complication of extraction. Care must be taken while performing dental cleaning and tooth extraction, especially of the maxillary premolar and molar teeth to avoid iatrogenic damage to surrounding structures.

  13. Influence of musical instruments on tooth positions.

    Science.gov (United States)

    Herman, E

    1981-08-01

    A 2-year longitudinal investigation was conducted at five New York City junior high schools on 11- to 13-year-old children starting instrumental music education to determine what tooth movement, if any, resulted from the playing of certain musical instruments. Questionnaires, interviews, oral examinations, and dental casts were used at the start of instrumental study, after one year, and then after a second year. Statistically significant anterior tooth movements occurred in an overwhelming majority of the instrumentalists, while negligible movements were recorded for the controls over this period. As a result of this study, certain recommendations can be made by dentists when they are asked to suggest instruments which are dentally suited for children. In most cases they can suggest more than one instrument which would be of benefit dentally to the individual child, especially in the increase or reduction of overjet and overbite. The playing of the correct musical instrument can serve as an adjunct to the dentist or orthodontist in trying to accomplish certain tooth movements.

  14. Tooth reattachment: An immediate esthetic restorative procedure for crown root fracture

    Directory of Open Access Journals (Sweden)

    Meenu G Singla

    2012-01-01

    Full Text Available Crown root fractures in the maxillary anterior region represent an intriguing challenge for clinicians. An interdisciplinary approach based on exposing fractured margins and the definitive prosthetic rehabilitation represent the standard modality of treatment for these conditions to restore the appropriate biologic dimension and esthetics. However, if the margins of the fragment and the tooth show perfect juxtaposition with no interfragmentary space and immediate esthetic replacement is needed, reattachment of the fractured segment using adhesives may be indicated. The aim of this case report is to describe the treatment of a crown root fracture at CEJ of an endodontically treated tooth having porcelain fused to metal crown by means of metal post placement and reattactment of the fragment using Glass ionomer cement with follow up of one year. Conclusion: Reattachment of a tooth fragment is a viable technique that restores function and aesthetics with a very conservative approach in a single visit and can be considered when treating patients with crown/root fractures of the anterior teeth.

  15. Contribution of donor and host mesenchyme to the transplanted tooth germs.

    Science.gov (United States)

    Nakaki, T; Saito, K; Ida-Yonemochi, H; Nakagawa, E; Kenmotsu, S; Ohshima, H

    2015-01-01

    Autologous tooth germ transplantation of immature teeth is an alternative method of tooth replacement that could be used instead of dental implants in younger patients. However, it is paramount that the dental pulp remain vital and that root formation continue in the transplanted location. The goal of this study is to characterize the healing of allogenic tooth grafts in an animal model using GFP-labeled donor or host postnatal mice. In addition, the putative stem cells were labeled before transplantation with a pulse-chase paradigm. Transplanted molars formed cusps and roots and erupted into occlusion by 2 wk postoperatively. Host label-retaining cells (LRCs) were maintained in the center of pulp tissue associating with blood vessels. Dual labeling showed that a proportion of LRCs were incorporated into the odontoblast layer. Host cells, including putative dendritic cells and the endothelium, also immigrated into the pulp tissue but did not contribute to the odontoblast layer. Therefore, LRCs or putative mesenchymal stem cells are retained in the transplanted pulps. Hertwig's epithelial root sheath remains vital, and epithelial LRCs are present in the donor cervical loops. Thus, the dynamic donor-host interaction occurred in the developing transplant, suggesting that these changes affect the characteristics of the dental pulp.

  16. Octacalcium phosphate (OCP) collagen composites enhance bone healing in a dog tooth extraction socket model.

    Science.gov (United States)

    Iibuchi, S; Matsui, K; Kawai, T; Sasaki, K; Suzuki, O; Kamakura, S; Echigo, S

    2010-02-01

    The authors have reported that a scaffold constructed of synthetic octacalcium phosphate (OCP) and porcine atelocollagen sponge (OCP/Col) enhanced bone regeneration more than sintered beta-tricalcium phosphate collagen composite or sintered hydroxyapatite collagen composite with a rat calvarial defect model. To aim for clinical application, the present study investigated whether OCP/Col would enhance bone healing in a dog tooth extraction socket model. Six adult, male, beagle dogs were used. The tooth extraction socket model was made by extracting bilateral third maxillary incisors and the subsequent removal of buccal bone. Disks of OCP/Col were implanted into one side of the model and the other side was untreated. The specimens were fixed 1 or 3 months after implantation. In radiographic analysis, the OCP/Col-treated group showed a wider range of radiopacity than the untreated control. Histologically, the OCP/Col-treated group showed more abundant newly formed bone than untreated control, and the implanted OCP was gradually resorbed. In morphometrical analysis, enlargement of the buccal alveolus in the OCP/Col group was significantly greater than in the untreated control. This study showed that implanted OCP/Col would be replaced by newly formed bone and OCP/Col implantation would enhance bone healing in a tooth socket model.

  17. The replacement of main materials for culture of Clostridium.tetani in a toxin production medium%破伤风杆菌产毒培养基主要原材料的替代研究

    Institute of Scientific and Technical Information of China (English)

    曹玲; 杨海珍; 孙一玫; 李国晏; 谢澎

    2014-01-01

    Objective To explore using dry powdered liver extract powder , trypticase , and peptone as main materials , it is the need for large-scale production , preparation was carried out for the medium production of tetanus toxin instead of the traditional medium contained liver extracellular fluid , trypsin digestion of casein and concentrated peptone water . Methods The prepared midea and the traditional media were both used in production process of tetanus toxin , from a sim-ple procedure to a large scale gradually , different components of the culture medium were changed by the multi -batch exper-iments and inoculate bacterial seeds , and cultured toxin production levels were obtained and compared , so did for index of biochemical standard .Firstly, on the basis of the replacement of liver extract powder to the extra dialysis fluid , then selec-tion peptone to replace concentrated peptone water was carried out .In combination of these three materials in a toxin pro-duction medium , comparative tests were performed in both of media .Results Several tests are completed , from a small capacity to a production process , the biochemistry indexes are obtained in media after cultivation of bacteria .In preparation of toxin, the medium contained liver extract powder , trypticase and peptone was compared to the traditional medium , it has no statistical significant difference(P>0.05)in both media.Conclusions The liver extract powder, trypticase, and pep-tone can replace the liver extra-dialysis fluid, trypsin digestion of casein and concentrated peptone water in the traditional medium in preparation of tetanus toxin in an industrial production .%目的:探索用干粉状的肝浸粉、胰酪胨、月示胨代替传统破伤风杆菌产毒培养基中使用的猪肝水透析外液、胰酶酪蛋白消化液、浓胨水,以满足规模化生产的需求。方法与传统的破伤风杆菌产毒培养基同时用于破伤风类毒素的生产过程,由小批量生产逐步

  18. ESR dosimetry using eggshells and tooth enamel for accidental dosimetry

    Energy Technology Data Exchange (ETDEWEB)

    Oka, Toshihide; Yamanaka, Chihiro; Ikeya, Motoji [Department of Earth and Space Science, Faculty of Science, Osaka Univ., Toyonaka, Osaka (Japan)

    1997-07-01

    The CO{sub 2}{sup -} signal of eggshells showed a good dose linearity and was appropriate in the wide dose range from 1 to 10 kGy, while ESR signal of CO{sub 2}{sup -} in sea and fresh water shells were saturated at a dose od below 10 kGy. The minimum detectable dose and G-value of CO{sub 2}{sup -} in eggshells were estimated 0.3 Gy and 0.28, respectively. The lifetime of CO{sub 2}{sup -} in eggshells could not be determined exactly because of overlapping organic signals, however it is still sufficiently long for practical use as ESR dosimeter materials. Various bird`s or reptile`s eggshells would be available as natural retrospective ESR dosimeter materials after nuclear accidents. Eggshells will be useful for the food irradiation dosimetry in the dose range of about a few kGy. Tooth enamel is one of the most useful dosimeter materials in public at a accident because of its high sensitivity. ESR dosimetry will replace TLD in near future if the cost of an ESR reader is further reduced . (author)

  19. Toleration, Synthesis or Replacement?

    DEFF Research Database (Denmark)

    Holtermann, Jakob v. H.; Madsen, Mikael Rask

    2016-01-01

    to have considerable problems keeping a clear focus on the key question: What are the implications of this empirical turn in terms of philosophy of legal science, of the social understanding of IL, and, not least, of the place of doctrinal scholarship after the alleged Wende? What is needed, we argue......, in order to answer is not yet another partisan suggestion, but rather an attempt at making intelligible both the oppositions and the possibilities of synthesis between normative and empirical approaches to law. Based on our assessment and rational reconstruction of current arguments and positions, we...... therefore outline a taxonomy consisting of the following three basic, ideal-types in terms of the epistemological understanding of the interface of law and empirical studies: toleration, synthesis and replacement. This tripartite model proves useful with a view to teasing out and better articulating...

  20. Effects of replacing rapeseed meal with fava bean at 2 concentrate crude protein levels on feed intake, nutrient digestion, and milk production in cows fed grass silage-based diets.

    Science.gov (United States)

    Puhakka, L; Jaakkola, S; Simpura, I; Kokkonen, T; Vanhatalo, A

    2016-10-01

    The objective of this study was to evaluate the production and physiological responses of dairy cows to the substitution of fava bean for rapeseed meal at 2 protein supplementation levels in grass silage-based diets. We used 6 primiparous and 6 multiparous Finnish Ayrshire cows in a cyclic changeover trial with a 2×3 factorial arrangement of treatments. The experimental diets consisted of formic acid-treated timothy-meadow fescue silage and 3 isonitrogenous concentrates containing either rapeseed meal, fava bean, or a 1:1 mixture of rapeseed meal and fava bean at low and high inclusion rates, resulting in concentrate crude protein (CP) levels of 15.4 and 19.0% in dry matter. Silage dry matter intake decreased linearly when rapeseed meal was replaced with fava bean, the negative effect being more distinct at the high CP level than the low (-2.3 vs. -0.9kg/d, respectively). Similarly, milk and milk protein yields decreased linearly with fava bean, the change tending to be greater at the high CP level than the low. Yield of milk fat was lower for fava bean compared with rapeseed meal, the difference showing no interaction with CP level. Especially at the high CP level, milk urea concentration was higher with fava bean compared with rapeseed meal indicating better utilization of protein from the rapeseed meal. The apparent total-tract organic matter digestibility did not differ between treatments at the low CP level, but digestibility was higher for fava bean than for rapeseed meal at the high CP level. Plasma concentrations of essential amino acids, including methionine and lysine, were lower for fava bean than for rapeseed meal. Compared with rapeseed meal, the use of fava bean in dairy cow diets as the sole protein supplement decreased silage intake and milk production in highly digestible formic acid-treated grass silage-based diets.

  1. 2H Stable Isotope Analysis of Tooth Enamel: A Pilot Study

    Science.gov (United States)

    Holobinko, Anastasia; Kemp, Helen; Meier-Augenstein, Wolfram; Prowse, Tracy; Ford, Susan

    2010-05-01

    Stable isotope analysis of biogenic tissues such as tooth enamel and bone mineral has become a well recognized and increasingly important method for determining provenance of human remains, and has been used successfully in bioarchaeological studies as well as forensic investigations (Lee-Thorp, 2008; Meier-Augenstein and Fraser, 2008). Particularly, 18O and 2H stable isotopes are well established proxies as environmental indicators of climate (temperature) and source water and are therefore considered as indicators of geographic life trajectories of animals and humans (Hobson et al., 2004; Schwarcz and Walker, 2006). While methodology for 2H analysis of human hair, fingernails, and bone collagen is currently used to determine geographic origin and identify possible migration patterns, studies involving the analysis of 2H in tooth enamel appear to be nonexistent in the scientific literature. The apparent lack of research in this area is believed to have two main reasons. (1) Compared to the mineral calcium hydroxylapatite Ca10(PO4)6(OH)2, in tooth enamel forming bio-apatite carbonate ions replace some of the hydroxyl ions at a rate of one CO32 replacing two OH, yet published figures for the degree of substitution vary (Wopenka and Pasteris, 2005). (2) Most probably due to the aforementioned no published protocols exist for sample preparation and analytical method to obtain δ2H-values from the hydroxyl fraction of tooth enamel. This dilemma has been addressed through a pilot study to establish feasibility of 2H stable isotope analysis of ground tooth enamel by continuous-flow isotope ratio mass spectrometry (IRMS) coupled on-line to a high-temperature conversion elemental analyzer (TC/EA). An array of archaeological and modern teeth has been analyzed under different experimental conditions, and results from this pilot study are being presented. References: Lee-Thorp, J.A. (2008) Archaeometry, 50, 925-950 Meier-Augenstein, W. and Fraser, I. (2008) Science & Justice

  2. OPTIMAL MAINTENANCE AND REPLACEMENT OF EXTRACTION MACHINERY

    Institute of Scientific and Technical Information of China (English)

    Suresh P.SETHI; Hong-Mo YEH; Rong ZHANG; Andrew K.S.JARDINE

    2008-01-01

    This paper considers a problem of optimal preventive maintenance and replacement schedule ofequipment devoted to extracting resources from known deposits. Typical examples are oil drills, mine shovels, etc. At most one replacement of the existing machinery by a new one is allowed. The problem is formulated as an optimal control problem subject to the state constraint that the remaining deposit at any given time is nonnegative. We show that the optimal preventive maintenance, production rates, and the replacement and salvage times of the existing machinery and the new one, if required, can be obtained by solving sequentially a series of free-end-point optimal control problems. Moreover, an algorithm based on this result is developed and used to solve two illustrative examples.

  3. Inhibition of apoptosis in early tooth development alters tooth shape and size.

    Science.gov (United States)

    Kim, J-Y; Cha, Y-G; Cho, S-W; Kim, E-J; Lee, M-J; Lee, J-M; Cai, J; Ohshima, H; Jung, H-S

    2006-06-01

    Apoptosis plays important roles in various stages of organogenesis. In this study, we hypothesized that apoptosis would play an important role in tooth morphogenesis. We examined the role of apoptosis in early tooth development by using a caspase inhibitor, z-VAD-fmk, concomitant with in vitro organ culture and tooth germ transplantation into the kidney capsule. Inhibition of apoptosis at the early cap stage did not disrupt the cell proliferation level when compared with controls. However, the macroscopic morphology of mice molar teeth exhibited dramatic alterations after the inhibition of apoptosis. Crown height was reduced, and mesiodistal diameter was increased in a concentration-dependent manner with z-VAD-fmk treatment. Overall, apoptosis in the enamel knot would be necessary for the proper formation of molar teeth, including appropriate shape and size.

  4. [Study on the appropriate parameters of automatic full crown tooth preparation for dental tooth preparation robot].

    Science.gov (United States)

    Yuan, F S; Wang, Y; Zhang, Y P; Sun, Y C; Wang, D X; Lyu, P J

    2017-05-09

    Objective: To further study the most suitable parameters for automatic full crown preparation using oral clinical micro robot. Its purpose is to improve the quality of automated tooth preparing for the system and to lay the foundation for clinical application. Methods: Twenty selected artificial resin teeth were used as sample teeth. The micro robot automatic tooth preparation system was used in dental clinic to control the picosecond laser beam to complete two dimensional cutting on the resin tooth sample according to the motion planning path. Using the laser scanning measuring microscope, each layer of cutting depth values was obtained and the average value was calculated. The monolayer cutting depth was determined. The three-dimensional (3D) data of the target resin teeth was obtained using internal scanner, and the CAD data of full-crown tooth preparation was designed by CAD self-develged software. According to the depth of the single layer, 11 complete resin teeth in phantom head were automatically prepared by the robot controlling the laser focused spot in accordance with the layer-cutting way. And the accuracy of resin tooth preparation was evaluated with the software. Using the same method, monolayer cutting depth parameter for cutting dental hard tissue was obtained. Then 15 extracted mandibular and maxillary first molars went through automatic full crown tooth preparation. And the 3D data of tooth preparations were obtained with intra oral scanner. The software was used to evaluate the accuracy of tooth preparation. Results: The results indicated that the single cutting depth of cutting resin teeth and in vitro teeth by picosecond laser were (60.0±2.6) and (45.0±3.6) μm, respectively. Using the tooth preparation robot, 11 artificial resin teeth and 15 complete natural teeth were automatically prepared, and the average time were (13.0±0.7), (17.0±1.8) min respectively. Through software evaluation, the average preparation depth of the occlusal surface

  5. Influence of tooth profile modification on spur gear dynamic tooth strain

    Science.gov (United States)

    Oswald, Fred B.; Townsend, Dennis P.

    1995-06-01

    This paper presents results of dynamic strain gage measurements performed on the NASA gear-noise rig. The experiments were part of a joint research program between NASA and the U.S. Army Research Laboratory to advance the technology of rotorcraft transmissions. Tests were performed on six sets of low contact ratio spur gears with different tooth profile modifications. Results presented include static and dynamic measurements of gear tooth strain taken over a matrix of operating conditions. The results demonstrate that a well-designed tooth profile modification can significantly reduce dynamic loads in spur gears, especially for gears which operate at high speed and under high torque. The two parabolic modifications tested were not as effective as linear modifications, possibly because the modification zone was too long.

  6. Replacement for antibiotics: Lysozyme

    Science.gov (United States)

    Antibiotics have been fed at subtherapeutic levels to swine as growth promoters for more than 60 years, and the majority of swine produced in the U.S. receive antibiotics in their feed at some point in their production cycle. These compounds benefit the producers by minimizing production losses by ...

  7. Respuesta productiva de conejos alimentados con forraje verde hidropónico de avena, como reemplazo parcial de concentrado comercial Productive response of rabbits fed with green hydroponic oats forage as partial replacement of commercial concentrate

    Directory of Open Access Journals (Sweden)

    Francisco Fabián Fuentes Carmona

    2011-04-01

    Full Text Available La respuesta productiva de conejos raza californiana alimentados con forraje verde hidropónico (FVH de avena como reemplazo parcial de concentrado comercial (CC, fue evaluada en condiciones de desierto en el norte de Chile. Se establecieron cinco tratamientos de alimentación, equivalentes a 0, 25, 50, 75 y 100% de reemplazo de la dieta diaria con FVH, el cual fue cosechado y utilizado directamente diez días después de la siembra. Cuarenta y cinco conejos destetados a los 31 días fueron evaluados en un diseño completamente al azar hasta alcanzar un peso de sacrificio de 2 kg de peso vivo. La calidad del FVH de avena fue considerada como buena, presentando similar valor nutritivo que el CC. Las variables evaluadas y sus respectivos rangos fueron: consumo de materia seca promedio (59.17 - 104.73 g/día, ganancia de peso vivo promedio (16.35 - 29.10 g/animal por día, conversión alimenticia promedio (3.31 - 3.93 kg MS/kg PV, tiempo de peso vivo a sacrificio (53 - 91 días, peso vivo final (1430 - 2044 g/animal, peso de la canal (1235 - 1385 g/animal y rendimiento de la canal (59.19 - 62.25%. El reemplazo de hasta 50% de la dieta base con FVH de avena no afectó significativamente (P The productive response of Californian rabbits fed with hydroponic green oats forage (HGOF as a partial replacement of commercial concentrate (CC was evaluated under desert conditions in northern Chile. Five treatments were established as follow: 0, 25, 50, 75 and 100% replacement of daily diet with HGOF, which was harvested and used directly at 10 days after sowing. Forty-five rabbits weaned at 31 days were evaluated in a completely randomized design until slaughter weight of 2.0 kg. HGOF quality was considered as good, presenting similar nutritional value to CC. The variables assessed and range values were: average dry matter intake (59.17-104.73 g/d, average weight gain (16.35-29.10 g/ rabbit for day, feed conversion average (3.31-3.93 kg DM/ kg LW, time of

  8. Correlation of natural tooth colour with aging in the Spanish population.

    Science.gov (United States)

    Gómez Polo, Cristina; Gómez Polo, Miguel; Montero, Javier; Martínez Vazquez De Parga, Juan Antonio; Celemin Viñuela, Alicia

    2015-10-01

    To analyse natural tooth colour in the Spanish population according to the colour coordinates lightness (L*), chroma (C*), hue (h*), red-green axis (a*) and yellow-blue axis (b*) in order to quantify the correlation and changes of tooth colour with age and sex. Natural tooth colour was measured in a sample of 1,361 Spanish participants of both sexes distributed within an age range of 16 to 89 years. The Easyshade Compact spectrophotometer was used and the CIELAB and CIELCh systems were followed. Pearson's bivariate correlations between age and colour coordinates were highly significant for L* (r=-0.674, P≤0.001), h* (r=-0.468, P≤0.001) and C* (r=0.417, P≤0.001). The correlation between age and colour coordinates was stronger for men than for women, for all colour coordinates. The results showed that C*, b* and a* increased by 0.60, 0.56 and 0.26 units/year on average, respectively, whereas L* and h* decreased progressively with age (by 0.60 units/year, on average), and colour differences increased in a systematic way as the gap between the ages being compared grew wider. The strongest correlation was found between age and L*, then between age and h* (both inverse relationships) and then between age and a*, C* and b* (direct relationships). In addition, a similar degree of change in the colour coordinates L*, C* and h* (of 0.60 units/year on average) was observed for natural tooth colour. Knowledge of the chromatic range of natural teeth may help to choose colour for the replacement of missing elements. © 2015 FDI World Dental Federation.

  9. Endogenous and Exogenous Substances Influencing the Orthodontic Tooth Movement

    Directory of Open Access Journals (Sweden)

    Mine Geçgelen Cesur

    2016-08-01

    Full Text Available Orthodontic tooth movement occurs as a result of prolonged application of controlled mechanical forces. Recent studies have focused on the effects of systemic or local applications of medications and the intake of dietary supplements as well as the mechanical forces. Factors affecting the orthodontic tooth movement are parathyroid hormone, thyroid hormones, estrogen, vitamin D3, eicosanoids, nonsteroidal anti-inflammatory drugs (NSAIDs, paracetamol, corticosteroids, bisphosphonates, cholesterol drugs, anticonvulsants, oral contraceptives, alcohol and nicotine use, nitric oxide, and fluoride. These medications have an important effect on the rate of tooth movement and treatment time. NSAIDs decrease tooth movement, but paracetamol has no effect. Parathyroid and thyroxin hormones increase tooth movement. Bisphosphonates have a strong inhibitory effect. Vitamin D3 stimulates tooth movement and dietary calcium seems to reduce it. It is important to discuss with patients about the consumption of these substances during orthodontic treatment.

  10. IBA analysis of a possible therapeutic ancient tooth inlay

    Science.gov (United States)

    Andrade, E.; Pineda, J. C.; Zavala, E. P.; Murillo, G.; Chavez, R.; Lazcurain, R.; Espinosa, Ma. L.; Villanueva, O.

    1998-03-01

    Five pre-Columbian human teeth from the same skeleton found during excavation in an ancient ceremonial center in Mexico, have been analyzed by two conventional Ion Beam Analysis (IBA) techniques: PIXE and 4He RBS. The anthropologists have estimated that the skeleton is about 2000 years old. X-ray radiography studies of one of these teeth have revealed that they contain an inlay in the tooth crown. The IBA methods have been used to study the inlay materials and also the tooth enamel. The IBA studies show that the tooth inlay materials have almost the same atomic composition as the tooth enamel. These results suggest that the tooth inlay were made for therapeutic purposes, using healthy tooth grains as inlay materials which were glued into the prepared teeth to fill it up.

  11. A NEW GENERATING METHOD FOR THE MACHINING OF A CYLINDRICAL GEAR WITH SYMMETRIC ARCUATE TOOTH TRACE

    Institute of Scientific and Technical Information of China (English)

    马振群; 龚堰珏; 王小椿

    2004-01-01

    Objective To introduce a new generating method for the machining of a cylindrical gear with symmetric arcuate tooth trace. Methods Adopting this method, the key problems of mismatch control and manufacturing of symmetric arcuate tooth trace gears are solved by using suitable cutter tilt and a new generating method with double-edge gear-wheel cutter. The machining principle is analyzed and the mathematical model of generating motion is established. Then the tooth flank equation and differential geometrical parameters are discussed. Results The minim alteration of cutter tilt will make the contact flank area change so as to satisfy the special requirements. It is easy to realize the tip relief of gearing by altering coefficients of every moving axis. Because the tooth has the arc shape, the symmetrical arcuate cylindrical gears have higher overall strength and it is easy to perform the flank grinding for high precision. Conclusion This new generating method has higher productivity. It is easy to get a perfect contact zone and fully give play to the potential bearing capacity of the gears. The symmetrical arcuate cylindrical gears can be used in highly durable and heavy duty gearing applications.

  12. A theropod tooth from the Late Triassic of southern Africa

    Indian Academy of Sciences (India)

    Sanghamitra Ray; Anusuya Chinsamy

    2002-06-01

    An isolated, large recurved and finely serrated tooth found associated with the prosauropod Euskelosaurus from the Late Triassic part of the Elliot Formation is described here. It is compared to the Triassic thecodonts and carnivorous dinosaurs and its possible affinity is discussed. The tooth possibly belongs to a basal theropod and shows some features similar to the allosauroids. This tooth is of significance, as dinosaur remains except for some footprints and trackways, are poorly known in the Late Triassic horizons of southern Africa.

  13. Sonosurgery for atraumatic tooth extraction: a clinical report.

    Science.gov (United States)

    Papadimitriou, Dimitrios E V; Geminiani, Alessandro; Zahavi, Thomas; Ercoli, Carlo

    2012-12-01

    The preservation of an intact labial plate during tooth extraction is a critical determinant of whether an immediate implant can be placed and is also an important predictor of the esthetic result. The purpose of this clinical report was to present a method for atraumatic tooth extraction by using an air-driven sonic instrument with specially designed inserts. This surgical technique provides the clinician with an efficient method for atraumatic tooth extraction and preservation of an intact labial plate.

  14. Modular Permanent Magnet Machines with Alternate Teeth Having Tooth Tips

    OpenAIRE

    Li, G. J.; Zhu, Z.Q.; Foster, M. P.; Stone, D. A.; Zhan, H.L.

    2015-01-01

    This paper presents single layer modular permanent magnet machines with either wound or unwound teeth with tooth tips. The structures with wound teeth having tooth tips are suitable for modular machines with slot number higher than pole number to compensate for the drop in winding factor due to the flux gaps in alternate stator teeth, accordingly to maintain or even to increase their average torques. However, the structures with unwound teeth having tooth tips are suitable for modular machine...

  15. 采用METHOCEL MXTM技术开发低脂肪香肠和肉制品%Creating low-fat sausage and meat products with METHOCEL MXTM fat replacement technology

    Institute of Scientific and Technical Information of China (English)

    颜正勇; Linda Bellekom-Allen; Mathias Frahm; Marina Kuntsevich

    2009-01-01

    As consumers aim to reduce the fat content of their diets,the foods targeted for reduction often include meat products,such as sausages and frankfurters because their inherently high fat contents and the lack of eating quality of the low fat alternatives make this the only acceptable option.Methocel MXTMFat Replacement Technology enables the formulation of low-fat meat products that combine the desired texture and succulent,juicy mouthfeel associated with full-fat products with a significant reduction in fat content.This technology,through the creation of a structured emulsion,allows the use of lower quantities of healthy liquid oils in place of saturated fat or hydrogenated oils.The emulsion system can be created by combining Methocel MXTMwith cold water and liquid oil.The oil content used can vary from 2 to 60 percent.One example provides an overview of how a sausage formulation with 10 percent fat content can be created,which is a significant reduction from the control sausages with 27 percent fat content.%由于消费者希望降低对脂肪特别是动物脂肪的摄取,诸如香肠类的肉制品已经逐步从消费者的日常饮食中降低使用量.METHOCELTMMX的脂肪替代技术可以使低脂肪的肉制品保持如全脂肉制品一样的优异的风味,提供良好的质构和柔嫩多汁的口感.这项技术使用健康的植物油来替代饱和脂肪酸或氢化植物油,形成形如"矩阵"的乳状液.将METHOCEL MXTM,冷水和植物油结合制成这个乳状液系统,植物油的含量可以是2%60%.本文中描述了一个用METHOCELTMMX的脂肪替代技术制作的10%脂肪含量的香肠,在保持良好质量的前提下,降低脂肪含量27%.

  16. Esthetic Reconstruction of Diastema with Adhesive Tooth-Colored Restorations and Hyaluronic Acid Fillers

    Directory of Open Access Journals (Sweden)

    Supawadee Naorungroj

    2017-01-01

    Full Text Available Objective. This report presents a comprehensive esthetic treatment with adhesive tooth-colored restorations in a combination with hyaluronic acid (HA fillers of diastema in an orthodontic patient with relapse. Case Report. A 36-year-old female patient consulted about 1.5–2 mm midline diastema after an orthodontic relapse of replacing missing central incisors with lateral incisors and dark-colored gingival tissue as a result of a metal post and core with porcelain fused to a metal (PFM crown at the left lateral incisor. Restorative treatments included replacing the PFM with all-ceramic material and placing a ceramic veneer on the right lateral incisor. To close the space, crown forms of both lateral incisors were altered. A direct resin composite was then used to reform right and left canines to a more ideal lateral incisor shape. An HA fillers injection was used to fill the remaining open gingival embrasure. Eighteen months after treatment, the interdental papilla remained stable and the patient was satisfied with the result. Conclusion. Esthetic reconstruction of diastema and open gingival embrasure in this case can be accomplished without orthodontic retreatment. Tooth-colored restorations and HA filler injection appear as a promising modality to address this patient’s esthetic concern.

  17. [Preserving the natural tooth versus extraction and implant placement: making a rational clinical decision].

    Science.gov (United States)

    Tsesis, I; Nemkowsky, C E; Tamse, E; Rosen, E

    2010-01-01

    Modern dental practice offers a wide variety of treatment alternatives and modalities. With the wider scale of treatment options, new dilemmas emerged. A common dilemma is the decision whether to preserve the natural tooth by endodontic treatment, or to extract the tooth and replace it with a single dental implant. The clinician needs to remember that the basic goal of dental implants is to replace missing teeth, and not present teeth. Prosthodontic, periodontal, and esthetic considerations should be integrated in the treatment planning process. Long-term prognosis, the capabilities offered by the modern endodontic treatment, the alternatives in case of treatment failure, post treatment quality of life and patient's preferences should all be recognized and incorporated in the dentist decision making. An important factor is the communication between the prosthodontist and the endodontist before and during the treatment in order to avoid possible risks or treatment failure. The integration of these factors would assist the clinician to achieve a rational treatment plan for the benefit of the patient.

  18. Epithelial Label-Retaining Cells Are Absent during Tooth Cycling in Salmo salar and Polypterus senegalus.

    Directory of Open Access Journals (Sweden)

    Sam Vandenplas

    Full Text Available The Atlantic salmon (Salmo salar and African bichir (Polypterus senegalus are both actinopterygian fish species that continuously replace their teeth without the involvement of a successional dental lamina. Instead, they share the presence of a middle dental epithelium: an epithelial tier enclosed by inner and outer dental epithelium. It has been hypothesized that this tier could functionally substitute for a successional dental lamina and might be a potential niche to house epithelial stem cells involved in tooth cycling. Therefore, in this study we performed a BrdU pulse chase experiment on both species to (1 determine the localization and extent of proliferating cells in the dental epithelial layers, (2 describe cell dynamics and (3 investigate if label-retaining cells are present, suggestive for the putative presence of stem cells. Cells proliferate in the middle dental epithelium, outer dental epithelium and cervical loop at the lingual side of the dental organ to form a new tooth germ. Using long chase times, both in S. salar (eight weeks and P. senegalus (eight weeks and twelve weeks, we could not reveal the presence of label-retaining cells in the dental organ. Immunostaining of P. senegalus dental organs for the transcription factor Sox2, often used as a stem cell marker, labelled cells in the zone of outer dental epithelium which grades into the oral epithelium (ODE transition zone and the inner dental epithelium of a successor only. The location of Sox2 distribution does not provide evidence for epithelial stem cells in the dental organ and, more specifically, in the middle dental epithelium. Comparison of S. salar and P. senegalus reveals shared traits in tooth cycling and thus advances our understanding of the developmental mechanism that ensures lifelong replacement.

  19. Repair or replacement of amalgam restorations: decisions at a USA and a UK dental school.

    Science.gov (United States)

    Setcos, James C; Khosravi, Reza; Wilson, Nairn H F; Shen, Chiayi; Yang, Mark; Mjör, Ivar A

    2004-01-01

    Whereas replacement of failed restorations is the major treatment for adults in dental practice, repair is an important alternative with the potential to save tooth structure and increase the longevity of restorations at a lower cost. This in vitro study recorded the choices of treatment for the same set of teeth with defective Class II amalgam restorations by students and faculty at two dental schools (University of Manchester, UK and University of Florida, USA). Treatment options (monitor, refurbish, repair and replace) and reason(s) for the choice of treatment for 24 marked amalgam restorations were selected. Overall, participants more frequently chose replacement of restorations; whereas, repair was the least favored option. The reasons cited the most to replace restorations were secondary caries including unsightly appearance, partially lost restoration and tooth fracture; for repair, the major reasons included loss of part of the restoration and marginal ditching; and for refurbishment, the major reasons included poor anatomic form and marginal ditching. There was a significant difference between the students and faculties at the two sites in their choice of treatment (p<0.0001; Chi-square test). The treatment decision to "monitor" the restorations was more frequent for the Manchester site than the Florida site. Conversely, the combined treatment decisions to "refurbish, repair and replace" were more frequently chosen in Florida than in Manchester.

  20. Comparison between normal and special chain-drive toothing

    Energy Technology Data Exchange (ETDEWEB)

    Dolipski, M.

    1985-12-01

    A comparison of these two types of tooth arrangements on chain drives with round-link chains comes out clearly in favour of the special toothing. The article describes the advantages of this type of toothing. A proposal is made to use the special tooth arrangement in the construction of drive pocket wheels. Such a move would prevent the disastrous effects of links becoming jammed in the pockets during running-in and would consequently improve the service life of both chain and drive sprocket.

  1. Patient Discomfort Following Single-Tooth Implant Placement

    DEFF Research Database (Denmark)

    Spin-Neto, Rubens; Pontes, Ana Emília Farias; Wenzel, Ann

    2014-01-01

    Aims: Evaluate postoperative discomfort (pain, bleeding and swelling) in single-tooth implant patients submitted to immediate or conventional tooth restoration together with assessment of treatment time. Methods: Twenty-four patients who received single-tooth maxillary dental implants were randomly...... assigned to an IR (Immediate Restoration) or CR (Conventional Restoration) group. In IR, an implant was inserted and a provisional tooth crown was delivered within the same session, while in CR it was delivered three months after implantation. Pain (first three days), bleeding (first day) and swelling...

  2. Evaluation of scaffold materials for tooth tissue engineering.

    Science.gov (United States)

    Ohara, Takayuki; Itaya, Toshimitsu; Usami, Kazutada; Ando, Yusuke; Sakurai, Hiroya; Honda, Masaki J; Ueda, Minoru; Kagami, Hideaki

    2010-09-01

    Recently, the possibility of tooth tissue engineering has been reported. Although there are a number of available materials, information about scaffolds for tooth tissue engineering is still limited. To improve the manageability of tooth tissue engineering, the effect of scaffolds on in vivo tooth regeneration was evaluated. Collagen and fibrin were selected for this study based on the biocompatibility to dental papilla-derived cells and the results were compared with those of polyglycolic acid (PGA) fiber and beta-tricalcium phosphate (beta-TCP) porous block, which are commonly used for tooth, dentin and bone tissue engineering. Isolated porcine tooth germ-derived cells were seeded onto one of those scaffolds and transplanted to the back of nude mice. Tooth bud-like structures were observed more frequently in collagen and fibrin gels than on PGA or beta-TCP, while the amount of hard tissue formation was less. The results showed that collagen and fibrin gel support the initial regeneration process of tooth buds possibly due to their ability to support the growth of epithelial and mesenchymal cells. On the other hand, maturation of tooth buds was difficult in fibrin and collagen gels, which may require other factors.

  3. Iron replacement therapy

    DEFF Research Database (Denmark)

    Nielsen, Ole Haagen; Coskun, Mehmet; Weiss, Günter

    2016-01-01

    PURPOSE OF REVIEW: Approximately, one-third of the world's population suffers from anemia, and at least half of these cases are because of iron deficiency. With the introduction of new intravenous iron preparations over the last decade, uncertainty has arisen when these compounds should be admini...... treatment, when to follow-up for relapse, which dosage and type of therapy should be recommended or not recommended, and if some patients should not be treated....... be administered and under which circumstances oral therapy is still an appropriate and effective treatment. RECENT FINDINGS: Numerous guidelines are available, but none go into detail about therapeutic start and end points or how iron-deficiency anemia should be best treated depending on the underlying cause...... of iron deficiency or in regard to concomitant underlying or additional diseases. SUMMARY: The study points to major issues to be considered in revisions of future guidelines for the true optimal iron replacement therapy, including how to assess the need for treatment, when to start and when to stop...

  4. In vitro tooth whitening effect of two medicated chewing gums compared to a whitening gum and saliva

    Directory of Open Access Journals (Sweden)

    Saroea Geoffrey

    2008-08-01

    Full Text Available Abstract Background Extrinsic staining of teeth may result from the deposition of a variety of pigments into or onto the tooth surface, which originate mainly from diet or from tobacco use. More recently, clinical studies have demonstrated the efficacy of some chewing gums in removing extrinsic tooth staining. The aim of this study was to assess the effectiveness of two nicotine medicated chewing gums (A and B on stain removal in an in vitro experiment, when compared with a confectionary whitening chewing gum (C and human saliva (D. Methods Bovine incisors were stained by alternating air exposure and immersion in a broth containing natural pigments such as coffee, tea and oral microorganisms for 10 days. Stained enamel samples were exposed to saliva alone or to the test chewing gums under conditions simulating human mastication. The coloration change of the enamel samples was measured using a spectrophotometer. Measurements were obtained for each specimen (average of three absorbances using the L*a*b scale: lightness (L*, red-green (a and yellow-blue (b. Results Medicated chewing gums (A and B removed a greater amount of visible extrinsic stain, while the confectionary chewing gum with a whitening claim (C had a milder whitening effect as evaluated by quantitative and qualitative assessment. Conclusion The tested Nicotine Replacement Therapy (NRT chewing gums were more effective in the removal of the extrinsic tooth stain. This visible improvement in tooth whitening appearance could strengthen the smokers' motivation to quit smoking.

  5. Gene expression profiling during murine tooth development

    Directory of Open Access Journals (Sweden)

    Maria A dos Santos silva Landin

    2012-07-01

    Full Text Available The aim of this study was to describe the expression of genes, including ameloblastin (Ambn, amelogenin X chromosome (Amelx and enamelin (Enam during early (pre-secretory tooth development. The expression of these genes has predominantly been studied at post-secretory stages. Deoxyoligonucleotide microarrays were used to study gene expression during development of the murine first molar tooth germ at 24h intervals, starting at the eleventh embryonic day (E11.5 and up to the seventh day after birth (P7. The profile search function of Spotfire software was used to select genes with similar expression profile as the enamel genes (Ambn, Amelx and Enam. Microarray results where validated using real-time Reverse Transcription-Polymerase Chain Reaction (real-time RT-PCR, and translated proteins identified by Western blotting. In situ localisation of the Ambn, Amelx and Enam mRNAs were monitored from E12.5 to E17.5 using deoxyoligonucleotide probes. Bioinformatics analysis was used to associate biological functions with differentially (p ≤0.05 expressed (DE genes.Microarray results showed a total of 4362 genes including Ambn, Amelx and Enam to be significant differentially expressed throughout the time-course. The expression of the three enamel genes was low at pre-natal stages (E11.5-P0 increasing after birth (P1-P7. Profile search lead to isolation of 87 genes with significantly similar expression to the three enamel proteins. The mRNAs expressed in dental epithelium and epithelium derived cells. Although expression of Ambn, Amelx and Enam were lower during early tooth development compared to secretory stages enamel proteins were detectable by Western blotting. Bioinformatic analysis associated the 87 genes with multiple biological functions. Around thirty-five genes were associated with fifteen transcription factors.

  6. Epithelial topography for repetitive tooth formation

    Directory of Open Access Journals (Sweden)

    Marcia Gaete

    2015-12-01

    Full Text Available During the formation of repetitive ectodermally derived organs such as mammary glands, lateral line and teeth, the tissue primordium iteratively initiates new structures. In the case of successional molar development, new teeth appear sequentially in the posterior region of the jaw from Sox2+ cells in association with the posterior aspect of a pre-existing tooth. The sequence of molar development is well known, however, the epithelial topography involved in the formation of a new tooth is unclear. Here, we have examined the morphology of the molar dental epithelium and its development at different stages in the mouse in vivo and in molar explants. Using regional lineage tracing we show that within the posterior tail of the first molar the primordium for the second and third molar are organized in a row, with the tail remaining in connection with the surface, where a furrow is observed. The morphology and Sox2 expression of the tail retains characteristics reminiscent of the earlier stages of tooth development, such that position along the A-P axes of the tail correlates with different temporal stages. Sox9, a stem/progenitor cell marker in other organs, is expressed mainly in the suprabasal epithelium complementary with Sox2 expression. This Sox2 and Sox9 expressing molar tail contains actively proliferating cells with mitosis following an apico-basal direction. Snail2, a transcription factor implicated in cell migration, is expressed at high levels in the tip of the molar tail while E-cadherin and laminin are decreased. In conclusion, our studies propose a model in which the epithelium of the molar tail can grow by posterior movement of epithelial cells followed by infolding and stratification involving a population of Sox2+/Sox9+ cells.

  7. 小型煤气厂生产工艺系统停产置换技术%Off Production and Replacement Technology in small Gas Plant Production Process

    Institute of Scientific and Technical Information of China (English)

    王强

    2012-01-01

    中煤大屯公司煤气厂1988年投入使用,2003年进行半水煤气掺混液化气和半水煤气掺混液化气改造,2007年停产,2010年报废,为防止发生意外,对停产后的设备及系统进行了置换。%Datun company gasworks put into use in 1988,it was remade in semi-water gas mixing liquefied petroleum gas and liquefied gas in 2003,and discontinued in 2007,and scrapped in 2010,to prevent accident,equipment and system of off production were displaced.

  8. Restoration of the Severely Decayed Tooth Using Crown Lengthening with Simultaneous Tooth-Preparation

    OpenAIRE

    2010-01-01

    This clinical case describes a treatment approach that combines, in a single appointment, a crown lengthening procedure and the final crown preparation for the restoration of a severely decayed tooth. This approach allows for a more accurate placement of the crown margin in relation to the bone crest while reducing treatment time.

  9. Restoration of the severely decayed tooth using crown lengthening with simultaneous tooth-preparation.

    Science.gov (United States)

    Park, Jun-Beom

    2010-04-01

    This clinical case describes a treatment approach that combines, in a single appointment, a crown lengthening procedure and the final crown preparation for the restoration of a severely decayed tooth. This approach allows for a more accurate placement of the crown margin in relation to the bone crest while reducing treatment time.

  10. Fate of HERS during Tooth Root Development

    OpenAIRE

    HUANG, XIAOFENG; BRINGAS, PABLO; Slavkin, Harold C.; Chai, Yang

    2009-01-01

    Tooth root development begins after the completion of crown formation in mammals. Previous studies have shown that Hertwig's epithelial root sheath (HERS) plays an important role in root development, but the fate of HERS has remained unknown. In order to investigate the morphological fate and analyze the dynamic movement of HERS cells in vivo, we generated K14-Cre;R26R mice. HERS cells are detectable on the surface of the root throughout root formation and do not disappear. Most of the HERS c...

  11. Pediatric Charcot-Marie-Tooth disease.

    Science.gov (United States)

    Jani-Acsadi, Agnes; Ounpuu, Sylvia; Pierz, Kristan; Acsadi, Gyula

    2015-06-01

    Heritable diseases of the peripheral nerves (Charcot-Marie-Tooth disease [CMT]) affect the motor units and sensory nerves, and they are among the most prevalent genetic conditions in the pediatric patient population. The typical clinical presentation includes distal muscle weakness and atrophy, but the severity and progression are largely variable. Improvements in supportive treatment have led to better preservation of patients' motor functions. More than 80 genes have been associated with CMT. These genetic discoveries, along with the developments of cellular and transgenic disease models, have allowed clinicians to better understand the disease mechanisms, which should lead to more specific treatments. Copyright © 2015 Elsevier Inc. All rights reserved.

  12. Tooth Germ-Like Construct Transplantation for Whole-Tooth Regeneration: An In Vivo Study in the Miniature Pig.

    Science.gov (United States)

    Yang, Kai-Chiang; Kitamura, Yutaka; Wu, Chang-Chin; Chang, Hao-Hueng; Ling, Thai-Yen; Kuo, Tzong-Fu

    2016-04-01

    The purpose of this study was to demonstrate the feasibility of whole-tooth regeneration using a tooth germ-like construct. Dental pulp from upper incisors, canines, premolars, and molars were extracted from sexually mature miniature pigs. Pulp tissues were cultured and expanded in vitro to obtain dental pulp stem cells (DPSCs), and cells were differentiated into odontoblasts and osteoblasts. Epithelial cells were isolated from gingival epithelium. The epithelial cells, odontoblasts, and osteoblasts were seeded onto the surface, upper, and lower layers, respectively, of a bioactive scaffold. The lower first and second molar tooth germs were removed bilaterally and the layered cell/scaffold constructs were transplanted to the mandibular alveolar socket of a pig. At 13.5 months postimplantation, seven of eight pigs developed two teeth with crown, root, and pulp structures. Enamel-like tissues, dentin, cementum, odontoblasts, and periodontal tissues were found upon histological inspection. The regenerated tooth expressed dentin matrix protein-1 and osteopontin. All pigs had regenerated molar teeth regardless of the original tooth used to procure the DPSCs. Pigs that had tooth germs removed or who received empty scaffolds did not develop teeth. Although periodontal ligaments were generated, ankylosis was found in some animals. This study revealed that implantation of a tooth germ-like structure generated a complete tooth with a high success rate. The implant location may influence the morphology of the regenerated tooth.

  13. the influence of replacing maize with chrysophyllum albidum seed ...

    African Journals Online (AJOL)

    AGROSEARCH UIL

    Production Technology, Moor Plantation, PMB 5029, Ibadan ... including; Coffee pulp (Fagbenro and Arowosoge, 1991a); plantain peel and yam peel (Fagbenro .... Aderolu et al (2011) fed biscuit waste as a replacer of maize to Clarias ...

  14. Performance and economic effects of partially replacing soybean ...

    African Journals Online (AJOL)

    Performance and economic effects of partially replacing soybean meal with palm kernel ... to determine the optimal level of inclusion for maximum production in broilers. ... while no PKC was used in treatment I, which also served as the control.

  15. evaluation of early calves' weaning diet as milk replacer for ...

    African Journals Online (AJOL)

    ACSS

    This results in depressed calves' growth rates, high calf mortality rates, late ... additive can be an effective milk- replacer in smallholder dairy production systems to wean dairy calves at 28-35 ... consumption, but also increases cash income for.

  16. Using your shoulder after replacement surgery

    Science.gov (United States)

    Joint replacement surgery - using your shoulder; Shoulder replacement surgery - after ... You have had shoulder replacement surgery to replace the bones of your shoulder joint with artificial parts. The parts include a stem made of metal and a ...

  17. A new concept in orthodontics: faster and healthier tooth movement by regularly consuming xyilitol chewing gum

    Directory of Open Access Journals (Sweden)

    Haryono Utomo

    2007-12-01

    Full Text Available Xylitol was first discovered in the 19th century, it wasn’t until the 1960’s that commercial production was first implemented. Recent studies showed that xylitol chewing gum is beneficial for preventing caries and periodontal disease. Therefore, it is also advantageous for orthodontic treatment, especially the fixed orthodontics patients who have difficulties in acquiring optimal oral health, particularly periodontal health which important in remodeling. However, how consuming xylitol chewing gum may stimulate tooth movement and preventing root resorption is still unclear. It is suggested that chewing activities may stimulate tooth movement, since jaw hypofunction leads to lower mineral apposition and bone function; and narrow periodontal ligament (PDL. These conditions may lead to impaired remodeling process, and increases the susceptibility of root resorption during orthodontic tooth movement. Moreover, since stimulation of the PDL could be mechanoreceptive (i.e. chewing action or nociceptive (i.e. painful stimulation, periodontal nerve fibers are supposed to play an important role in bone remodeling. It is supported by a study which revealed that during tooth movement, the galanin-containing immunoreactive nerve fibers, a part of primary sensory neurons in the PDL is increasing. Galanin is able to induce osteoclast differentiation that needed for bone resorption in orthodontic treatment. The objective of this study is to elucidate a new concept in using xylitol chewing gum as an excellent media to have a faster and healthier orthodontic movement. Since continuous chewing stimulates the PDL which enhances tooth movement, improves oral health, and prevents root resorption; it is concluded that this concept is possible.

  18. Alternatives to testosterone replacement: testosterone restoration.

    Science.gov (United States)

    McCullough, Andrew

    2015-01-01

    The European Male Aging Study has demonstrated that the hypogonadism of male aging is predominantly secondary. Theoretically with appropriate stimulation from the pituitary, the aging testis should be able to produce eugonadal levels of testosterone. The strategies for the treatment of late onset hypogonadism (LOH) have focused on replacement with exogenous testosterone versus restoration of endogenous production. The purpose of this article is to review existing peer-reviewed literature supporting the concept of restoration of endogenous testosterone in the treatment of LOH.

  19. Alternatives to testosterone replacement: testosterone restoration

    OpenAIRE

    Andrew McCullough

    2014-01-01

    The European Male Aging Study has demonstrated that the hypogonadism of male aging is predominantly secondary. Theoretically with appropriate stimulation from the pituitary, the aging testis should be able to produce eugonadal levels of testosterone. The strategies for the treatment of late onset hypogonadism (LOH) have focused on replacement with exogenous testosterone versus restoration of endogenous production. The purpose of this article is to review existing peer-reviewed literature supp...

  20. Massive clot formation after tooth extraction

    Directory of Open Access Journals (Sweden)

    Santosh Hunasgi

    2015-01-01

    Full Text Available Oral surgical procedures mainly tooth extraction can be related with an extended hemorrhage owed to the nature of the process resulting in an "open wound." The attempt of this paper is to present a case of massive postoperative clot formation after tooth extraction and highlight on the oral complications of surgical procedures. A 32-year-old male patient reported to the Dental Clinic for evaluation and extraction of grossly decayed 46. Clinical evaluation of 46 revealed root stumps. Extraction of the root stumps was performed, and it was uneventful. Hemostasis was achieved and postsurgical instructions were specified to the patient. The patient reported to the clinic, the very subsequent morning with a criticism of bleeding at the extraction site. On clinical examination, bleeding was noted from the socket in relation to 46. To control bleeding, oral hemostatic drugs Revici - E (Ethamsylate 500 mg was prescribed and bleeding was stopped in 2 h. However, a massive clot was formed at the extraction site. Further, this clot resolved on its own in 1-week time. Despite the fact that dental extraction is considered to be a minor surgical procedure, some cases may present with life-threatening complications including hemorrhage. Vigilant and significant history taking, physical and dental examinations prior to dental procedures are a must to avoid intraoperative and postoperative complications.