WorldWideScience

Sample records for repetitive flash excitation

  1. A high repetition rate XUV seeding source for FLASH2

    Energy Technology Data Exchange (ETDEWEB)

    Willner, Arik

    2012-05-15

    Improved performance of free-electron laser (FEL) light sources in terms of timing stability, pulse shape and spectral properties of the amplified FEL pulses is of interest in material science, the fields of ultrafast dynamics, biology, chemistry and even special branches in industry. A promising scheme for such an improvement is direct seeding with high harmonic generation (HHG) in a noble gas target. A free-electron laser seeded by an external extreme ultraviolet (XUV) source is planned for FLASH2 at DESY in Hamburg. The requirements for the XUV/soft X-ray source can be summarized as follows: A repetition rate of at least 100 kHz in a 10 Hz burst is needed at variable wavelengths from 10 to 40 nm and pulse energies of several nJ within a single laser harmonic. This application requires a laser amplifier system with exceptional parameters, mJ-level pulse energy, 10-15 fs pulse duration at 100 kHz (1 MHz) burst repetition rate. A new optical parametric chirped-pulse amplification (OPCPA) system is under development in order to meet these requirements, and very promising results have been achieved in the last three years. In parallel to this development, a new HHG concept is necessary to sustain high average power of the driving laser system and to generate harmonics with high conversion efficiencies. Currently, the highest conversion efficiency with HHG has been demonstrated using gas-filled capillary targets. For our application, only a free-jet target can be used for HHG, in order to overcome damage threshold limitations of HHG target optics at a high repetition rate. A novel dual-gas multijet gas target has been developed and first experiments show remarkable control of the degree of phase matching forming the basis for improved control of the harmonic photon flux and the XUV pulse characteristics. The basic idea behind the dual-gas concept is the insertion of matching zones in between multiple HHG sources. These matching sections are filled with hydrogen which

  2. The examination of berberine excited state by laser flash photolysis

    Science.gov (United States)

    Cheng, Lingli; Wang, Mei; Zhao, Ping; Zhu, Hui; Zhu, Rongrong; Sun, Xiaoyu; Yao, Side; Wang, Shilong

    2009-07-01

    The property of the excited triplet state of berberine (BBR) was investigated by using time-resolved laser flash photolysis of 355 nm in acetonitrile. The transient absorption spectra of the excited triplet BBR were obtained in acetonitrile, which have an absorption maximum at 420 nm. And the ratio of excitation to ionization of BBR in acetonitrile solvent was calculated. The self-decay and self-quenching rate constants, and the absorption coefficient of 3BBR* were investigated and the excited state quantum yield was determined. Furthermore utilizing the benzophenone (BEN) as a triplet sensitizer, and the β-carotene (Car) as an excited energy transfer acceptor, the assignment of 3BBR* was further confirmed and the related energy transfer rate constants were also determined.

  3. On the repetitive operation of a self-switched transversely excited atmosphere CO2 laser

    Indian Academy of Sciences (India)

    Pallavi Raote; Gautam Patil; J Padma Nilaya; D J Biswas

    2010-11-01

    The repetition rate capability of self-switched transversely excited atmosphere (TEA) CO2 laser was studied for different gas flow configurations. For an optimized gas flow configuration, repetitive operation was achieved at a much smaller gas replenishment factor between two successive pulses when compared with repetitive systems energized by conventional pulsers.

  4. Cooling-down of thermal thick probes after flash excitation - A measure for the real energy density?

    Science.gov (United States)

    Krankenhagen, Rainer; Worzewski, Tamara; Maierhofer, Christiane

    2015-09-01

    Though flash lamps are one of the most applied heat sources in the field of Thermographic Testing (TT) using active thermography, only little is known about the actually achieved energy input into test objects. In this paper, an easy to realize sensor concept is proposed and experimentally evaluated. The concept is based on the measurement of the surface temperature of a thermal thick probe after flash excitation. After considering the sensor concept with FEM simulations the experimental investigation of four materials (two polymer and two building materials) is described. It will be shown that a suited coating is essential for the realization of the sensor concept. The experimental results prove the suitability of black rigid PVC as the most promising material. Using a coated PVC sample the energy density of short laser pulses, similar to flashes of flash lamps, could be determined exactly with an estimated relative uncertainty of only a few percent.

  5. Longitudinally excited CO2 laser with short laser pulse operating at high repetition rate

    Science.gov (United States)

    Li, Jianhui; Uno, Kazuyuki; Akitsu, Tetsuya; Jitsuno, Takahisa

    2016-11-01

    A short-pulse longitudinally excited CO2 laser operating at a high repetition rate was developed. The discharge tube was made of a 45 cm-long or 60 cm-long dielectric tube with an inner diameter of 16 mm and two metallic electrodes at the ends of the tube. The optical cavity was formed by a ZnSe output coupler with a reflectivity of 85% and a high-reflection mirror. Mixed gas (CO2:N2:He = 1:1:2) was flowed into the discharge tube. A high voltage of about 33 kV with a rise time of about 200 ns was applied to the discharge tube. At a repetition rate of 300 Hz and a gas pressure of 3.4 kPa, the 45 cm-long discharge tube produced a short laser pulse with a laser pulse energy of 17.5 mJ, a spike pulse energy of 0.2 mJ, a spike width of 153 ns, and a pulse tail length of 90 μs. The output power was 5.3 W. The laser pulse waveform did not depend on the repetition rate, but the laser beam profile did. At a low repetition rate of less than 50 Hz, the laser beam had a doughnut-like shape. However, at a high repetition rate of more than 150 Hz, the discharge concentrated at the center of the discharge tube, and the intensity at the center of the laser beam was higher. The laser beam profile depended on the distribution of the discharge. An output power of 7.0 W was achieved by using the 60 cm-long tube.

  6. Delayed Light Emission as a Means of Sorting Tomatoes : DLE Characteristics of Tomatoes Excited by Flash Light

    OpenAIRE

    CHUMA, Yutaka; Ohura, Masanobu; Tagawa, Akio

    1982-01-01

    An apparatus for measuring the DLE of tomatoes using flash light excitation was devised to examine the DLE characteristics of the tomatoes. The DLE of tomatoes was saturated in the dark chamber for a duration of 5 minutes and was hardly affected by fruit temperature. The intensity of the DLE correlated well with the value of peel color, suggesting the possibility of maturity evaluation and sorting of tomatoes according to their DLE intensity.

  7. Cortical excitability changes after high-frequency repetitive transcranial magnetic stimulation for central poststroke pain.

    Science.gov (United States)

    Hosomi, Koichi; Kishima, Haruhiko; Oshino, Satoru; Hirata, Masayuki; Tani, Naoki; Maruo, Tomoyuki; Yorifuji, Shiro; Yoshimine, Toshiki; Saitoh, Youichi

    2013-08-01

    Central poststroke pain (CPSP) is one of the most refractory chronic pain syndromes. Repetitive transcranial magnetic stimulation (rTMS) of the primary motor cortex has been demonstrated to provide moderate pain relief for CPSP. However, the mechanism underlying the pain relief remains unclear. The objective of this study was to assess changes in cortical excitability in patients with intractable CPSP before and after rTMS of the primary motor cortex. Subjects were 21 patients with CPSP of the hand who underwent rTMS. The resting motor threshold, the amplitude of the motor evoked potential, duration of the cortical silent period, short interval intracortical inhibition, and intracortical facilitation were measured as parameters of cortical excitability before and after navigation-guided 5 Hz rTMS of the primary motor cortex corresponding to the painful hand. Pain reduction from rTMS was assessed with a visual analog scale. The same parameters were measured in both hemispheres of 8 healthy controls. Eight of 21 patients experienced ≥ 30% pain reduction after rTMS (responders). The resting motor threshold in the patients was higher than those in the controls at baseline (P=.035). Intracortical facilitation in the responders was lower than in the controls and the nonresponders at baseline (P=.035 and P=.019), and significantly increased after rTMS (P=.039). There were no significant differences or changes in the other parameters. Our findings suggest that restoration of abnormal cortical excitability might be one of the mechanisms underlying pain relief as a result of rTMS in CPSP.

  8. Suppression of motor cortical excitability in anesthetized rats by low frequency repetitive transcranial magnetic stimulation.

    Directory of Open Access Journals (Sweden)

    Paul A Muller

    Full Text Available Repetitive transcranial magnetic stimulation (rTMS is a widely-used method for modulating cortical excitability in humans, by mechanisms thought to involve use-dependent synaptic plasticity. For example, when low frequency rTMS (LF rTMS is applied over the motor cortex, in humans, it predictably leads to a suppression of the motor evoked potential (MEP, presumably reflecting long-term depression (LTD -like mechanisms. Yet how closely such rTMS effects actually match LTD is unknown. We therefore sought to (1 reproduce cortico-spinal depression by LF rTMS in rats, (2 establish a reliable animal model for rTMS effects that may enable mechanistic studies, and (3 test whether LTD-like properties are evident in the rat LF rTMS setup. Lateralized MEPs were obtained from anesthetized Long-Evans rats. To test frequency-dependence of LF rTMS, rats underwent rTMS at one of three frequencies, 0.25, 0.5, or 1 Hz. We next tested the dependence of rTMS effects on N-methyl-D-aspartate glutamate receptor (NMDAR, by application of two NMDAR antagonists. We find that 1 Hz rTMS preferentially depresses unilateral MEP in rats, and that this LTD-like effect is blocked by NMDAR antagonists. These are the first electrophysiological data showing depression of cortical excitability following LF rTMS in rats, and the first to demonstrate dependence of this form of cortical plasticity on the NMDAR. We also note that our report is the first to show that the capacity for LTD-type cortical suppression by rTMS is present under barbiturate anesthesia, suggesting that future neuromodulatory rTMS applications under anesthesia may be considered.

  9. Change in the ipsilateral motor cortex excitability is independent from a muscle contraction phase during unilateral repetitive isometric contractions.

    Directory of Open Access Journals (Sweden)

    Kazumasa Uehara

    Full Text Available The aim of this study was to investigate the difference in a muscle contraction phase dependence between ipsilateral (ipsi- and contralateral (contra-primary motor cortex (M1 excitability during repetitive isometric contractions of unilateral index finger abduction using a transcranial magnetic stimulation (TMS technique. Ten healthy right-handed subjects participated in this study. We instructed them to perform repetitive isometric contractions of the left index finger abduction following auditory cues at 1 Hz. The force outputs were set at 10, 30, and 50% of maximal voluntary contraction (MVC. Motor evoked potentials (MEP were obtained from the right and left first dorsal interosseous muscles (FDI. To examine the muscle contraction phase dependence, TMS of ipsi-M1 or contra-M1 was triggered at eight different intervals (0, 20, 40, 60, 80, 100, 300, or 500 ms after electromyogram (EMG onset when each interval had reached the setup triggering level. Furthermore, to demonstrate the relationships between the integrated EMG (iEMG in the active left FDI and the ipsi-M1 excitability, we assessed the correlation between the iEMG in the left FDI for the 100 ms preceding TMS onset and the MEP amplitude in the resting/active FDI for each force output condition. Although contra-M1 excitability was significantly changed after the EMG onset that depends on the muscle contraction phase, the modulation of ipsi-M1 excitability did not differ in response to any muscle contraction phase at the 10% of MVC condition. Also, we found that contra-M1 excitability was significantly correlated with iEMG in all force output conditions, but ipsi-M1 excitability was not at force output levels of below 30% of MVC. Consequently, the modulation of ipsi-M1 excitability was independent from the contraction phase of unilateral repetitive isometric contractions at least low force output.

  10. PS II model based analysis of transient fluorescence yield measured on whole leaves of Arabidopsis thaliana after excitation with light flashes of different energies.

    Science.gov (United States)

    Belyaeva, N E; Schmitt, F-J; Paschenko, V Z; Riznichenko, G Yu; Rubin, A B; Renger, G

    2011-02-01

    Our recently presented PS II model (Belyaeva et al., 2008) was improved in order to permit a consistent simulation of Single Flash Induced Transient Fluorescence Yield (SFITFY) traces that were earlier measured by Steffen et al. (2005) on whole leaves of Arabidopsis (A.) thaliana at four different energies of the actinic flash. As the essential modification, the shape of the actinic flash was explicitly taken into account assuming that an exponentially decaying rate simulates the time dependent excitation of PS II by the 10 ns actinic flash. The maximum amplitude of this excitation exceeds that of the measuring light by 9 orders of magnitude. A very good fit of the SFITFY data was achieved in the time domain from 100 ns to 10s for all actinic flash energies (the maximum energy of 7.5 × 10¹⁶ photons/(cm²flash) is set to 100%, the relative energies of weaker actinic flashes were of ∼8%, 4%, ∼1%). Our model allows the calculation and visualization of the transient PS II redox state populations ranging from the dark adapted state, via excitation energy and electron transfer steps induced by pulse excitation, followed by final relaxation into the stationary state eventually attained under the measuring light. It turned out that the rate constants of electron transfer steps are invariant to intensity of the actinic laser flash. In marked contrast, an increase of the actinic flash energy by more than two orders of magnitude from 5.4×10¹⁴ photons/(cm²flash) to 7.5×10¹⁶ photons/(cm²flash), leads to an increase of the extent of fluorescence quenching due to carotenoid triplet (³Car) formation by a factor of 14 and of the recombination reaction between reduced primary pheophytin (Phe(-)) and P680(+) by a factor of 3 while the heat dissipation in the antenna complex remains virtually constant. The modified PS II model offers new opportunities to compare electron transfer and dissipative parameters for different species (e.g. for the green algae and the

  11. Absolute OH Number Density Measurements in Lean Fuel-Air Mixtures Excited by a Repetitively Pulsed Nanosecond Discharge

    Science.gov (United States)

    2013-01-01

    discharge filaments and near the electrode edges [9]. Instead of using absorption measurement, an atmospheric pressure flame generated by a Hencken...DuPont) is placed between each electrode and the channel wall, to reduce air gaps and prevent corona discharge outside the cell. In the present work...1 Absolute OH Number Density Measurements in Lean Fuel-Air Mixtures Excited by a Repetitively Pulsed Nanosecond Discharge Zhiyao Yin, Campbell D

  12. Competition between annihilation and trapping leads to strongly reduced yields of photochemistry under ps-flash excitation.

    Science.gov (United States)

    Wulf, K; Trissl, H W

    1996-05-01

    Excitation of photosynthetic systems with short intense flashes is known to lead to exciton-exciton annihilation processes. Here we quantify the effect of competition between annihilation and trapping for Photosystem II, Photosystem I (thylakoids from peas and membranes from the cyanobacterium Synechocystis sp.), as well as for the purple bacterium Rhodospirillum rubrum. In none of the cases it was possible to reach complete product saturation (i.e. closure of reaction centers) even with an excitation energy exceeding 10 hits per photosynthetic unit. The parameter α introduced by Deprez et al. ((1990) Biochim. Biophys. Acta 1015: 295-303) describing the competition between exciton-exciton annihilation and trapping was calculated to range between ≈4.5 (PS II) and ≈6 (Rs. rubrum). The rate constants for bimolecular exciton-exciton annihilation ranged between (42 ps)(-1) and (2.5 ps)(-1) for PS II and PS I-membranes of Synechocystis, respectively. The data are interpreted in terms of hopping times (i.e. mean residence time of the excited state on a chromophore) according to random walk in isoenergetic antenna.

  13. Human sensory-evoked responses differ coincident with either "fusion-memory" or "flash-memory", as shown by stimulus repetition-rate effects

    Directory of Open Access Journals (Sweden)

    Baird Bill

    2006-02-01

    Full Text Available Abstract Background: A new method has been used to obtain human sensory evoked-responses whose time-domain waveforms have been undetectable by previous methods. These newly discovered evoked-responses have durations that exceed the time between the stimuli in a continuous stream, thus causing an overlap which, up to now, has prevented their detection. We have named them "A-waves", and added a prefix to show the sensory system from which the responses were obtained (visA-waves, audA-waves, somA-waves. Results: When A-waves were studied as a function of stimulus repetition-rate, it was found that there were systematic differences in waveshape at repetition-rates above and below the psychophysical region in which the sensation of individual stimuli fuse into a continuity. The fusion phenomena is sometimes measured by a "Critical Fusion Frequency", but for this research we can only identify a frequency-region [which we call the STZ (Sensation-Transition Zone]. Thus, the A-waves above the STZ differed from those below the STZ, as did the sensations. Study of the psychophysical differences in auditory and visual stimuli, as shown in this paper, suggest that different stimulus features are detected, and remembered, at stimulation rates above and below STZ. Conclusion: The results motivate us to speculate that: 1 Stimulus repetition-rates above the STZ generate waveforms which underlie "fusion-memory" whereas rates below the STZ show neuronal processing in which "flash-memory" occurs. 2 These two memories differ in both duration and mechanism, though they may occur in the same cell groups. 3 The differences in neuronal processing may be related to "figure" and "ground" differentiation. We conclude that A-waves provide a novel measure of neural processes that can be detected on the human scalp, and speculate that they may extend clinical applications of evoked response recordings. If A-waves also occur in animals, it is likely that A-waves will provide

  14. A repetitively pulsed xenon chloride excimer laser with all ferrite magnetic cores (AFMC) based all solid state exciter

    Science.gov (United States)

    Benerji, N. S.; Varshnay, N. K.; Ghodke, D. V.; Singh, A.

    2016-10-01

    Performance of repetitively pulsed xenon chloride excimer laser (λ~308 nm) with solid state pulser consisting of magnetic pulse compression circuit (MPC) using all ferrite magnetic cores (AFMC) is reported. Laser system suitable for 100 Hz operation with inbuilt pre-ionizer, compact gas circulation and cooling has been developed and presented. In this configuration, high voltage pulses of ~8 μs duration are compressed to ~100 ns by magnetic pulse compression circuit with overall compression factor of ~80. Pulse energy of ~18 J stored in the primary capacitor is transferred to the laser head with an efficiency of ~85% compared to ~70% that is normally achieved in such configurations using annealed met-glass core. This is a significant improvement of about 21%. Maximum output laser pulse energy of ~100 mJ was achieved at repetition rate of 100 Hz with a typical pulse to pulse energy stability of ±5% and laser pulse energy of 150 mJ was generated at low rep-rate of ~40 Hz. This exciter uses a low current and low voltage solid state switch (SCR) that replaces high voltage and high current switch i. e, thyratron completely. The use of solid state exciter in turn reduces electromagnetic interference (EMI) effects particularly in excimer lasers where high EMI is present due to high di/dt. The laser is focused on a thin copper sheet for generation of micro-hole and the SEM image of the generated micro hole shows the energy stability of the laser at high repetition rate operation. Nearly homogeneous, regular and well developed xenon chloride (XeCl) laser beam spot was achieved using the laser.

  15. Excitability and firing behavior of single slow motor axons transmitting natural repetitive firing of human motoneurons.

    Science.gov (United States)

    Kudina, Lydia P; Andreeva, Regina E

    2017-08-01

    Excitability of motor axons is critically important for realizing their main function, i.e., transmitting motoneuron firing to muscle fibers. The present study was designed to explore excitability recovery and firing behavior in single slow axons transmitting human motoneuron firing during voluntary muscle contractions. The abductor digiti minimi, flexor carpi ulnaris, and tibialis anterior were investigated during threshold stimulation of corresponding motor nerves. Motor unit (MU) firing index in response to testing volleys evoking M-responses was used as a physiological measure of axonal excitability and its changes throughout a target interspike interval (ISI) were explored. It was shown that axons displayed an early irresponsive period (within the first ~2-5 ms of a target ISI) that was followed by a responsive period (for the next 5-17 ms of the ISI), in which MUs fired axonal doublets, and a later irresponsive period. At the beginning of the responsive period, M-responses showed small latency delays. However, since at that ISI moment, MUs displayed excitability recovery with high firing index, slight latency changes may be considered as a functionally insignificant phenomenon. The duration of axonal doublet ISIs did not depend on motoneuron firing frequencies (range 4.3-14.6 imp/s). The question of whether or not traditionally described axonal recovery excitability cycle is realistic in natural motor control is discussed. In conclusion, the present approach, exploring, for the first time, excitability recovery in single slow axons during motoneuron natural activation, can provide further insight into axonal firing behavior in normal states and diseases.NEW & NOTEWORTHY Excitability of single slow axons was estimated by motor unit firing index in response to motor nerve stimulation, and its changes throughout a target interspike interval were explored during transmitting human motoneuron natural firing. It was found that axons exhibited early irresponsive

  16. Shal/K(v4 channels are required for maintaining excitability during repetitive firing and normal locomotion in Drosophila.

    Directory of Open Access Journals (Sweden)

    Yong Ping

    Full Text Available BACKGROUND: Rhythmic behaviors, such as walking and breathing, involve the coordinated activity of central pattern generators in the CNS, sensory feedback from the PNS, to motoneuron output to muscles. Unraveling the intrinsic electrical properties of these cellular components is essential to understanding this coordinated activity. Here, we examine the significance of the transient A-type K(+ current (I(A, encoded by the highly conserved Shal/K(v4 gene, in neuronal firing patterns and repetitive behaviors. While I(A is present in nearly all neurons across species, elimination of I(A has been complicated in mammals because of multiple genes underlying I(A, and/or electrical remodeling that occurs in response to affecting one gene. METHODOLOGY/PRINCIPAL FINDINGS: In Drosophila, the single Shal/K(v4 gene encodes the predominant I(A current in many neuronal cell bodies. Using a transgenically expressed dominant-negative subunit (DNK(v4, we show that I(A is completely eliminated from cell bodies, with no effect on other currents. Most notably, DNK(v4 neurons display multiple defects during prolonged stimuli. DNK(v4 neurons display shortened latency to firing, a lower threshold for repetitive firing, and a progressive decrement in AP amplitude to an adapted state. We record from identified motoneurons and show that Shal/K(v4 channels are similarly required for maintaining excitability during repetitive firing. We then examine larval crawling, and adult climbing and grooming, all behaviors that rely on repetitive firing. We show that all are defective in the absence of Shal/K(v4 function. Further, knock-out of Shal/K(v4 function specifically in motoneurons significantly affects the locomotion behaviors tested. CONCLUSIONS/SIGNIFICANCE: Based on our results, Shal/K(v4 channels regulate the initiation of firing, enable neurons to continuously fire throughout a prolonged stimulus, and also influence firing frequency. This study shows that Shal/K(v4

  17. The chlorophyll a fluorescence induction pattern in chloroplasts upon repetitive single turnover excitations: accumulation and function of QB-nonreducing centers.

    Science.gov (United States)

    Vredenberg, Wim; Kasalicky, Vojtech; Durchan, Milan; Prasil, Ondrej

    2006-03-01

    The increase of chlorophyll fluorescence yield in chloroplasts in a 12.5 Hz train of saturating single turnover flashes and the kinetics of fluorescence yield decay after the last flash have been analyzed. The approximate twofold increase in Fm relative to Fo, reached after 30-40 flashes, is associated with a proportional change in the slow (1-20 s) component of the multiphasic decay. This component reflects the accumulation of a sizeable fraction of QB-nonreducing centers. It is hypothesized that the generation of these centers occurs in association with proton transport across the thylakoid membrane. The data are quantitatively consistent with a model in which the fluorescence quenching of QB-nonreducing centers is reversibly released after second excitation and electron trapping on the acceptor side of Photosystem II.

  18. Distinct changes in cortical and spinal excitability following high-frequency repetitive TMS to the human motor cortex.

    Science.gov (United States)

    Quartarone, Angelo; Bagnato, Sergio; Rizzo, Vincenzo; Morgante, Francesca; Sant'angelo, Antonio; Battaglia, Fortunato; Messina, Corrado; Siebner, Hartwig Roman; Girlanda, Paolo

    2005-02-01

    It has been shown that high-frequency repetitive transcranial magnetic stimulation (rTMS) to the human primary motor hand area (M1-HAND) can induce a lasting increase in corticospinal excitability. Here we recorded motor evoked potentials (MEPs) from the right first dorsal interosseus muscle to investigate how sub-threshold high-frequency rTMS to the M1-HAND modulates cortical and spinal excitability. In a first experiment, we gave 1500 stimuli of 5 Hz rTMS. At an intensity of 90% of active motor threshold, rTMS produced no effect on MEP amplitude at rest. Increasing the intensity to 90% of resting motor threshold (RMT), rTMS produced an increase in MEP amplitude. This facilitatory effect gradually built up during the course of rTMS, reaching significance after the administration of 900 stimuli. In a second experiment, MEPs were elicited during tonic contraction using weak anodal electrical or magnetic test stimuli. 1500 (but not 600) conditioning stimuli at 90% of RMT induced a facilitation of MEPs in the contracting FDI muscle. In a third experiment, 600 conditioning stimuli were given at 90% of RMT to the M1-HAND. Using two well-established conditioning-test paradigms, we found a decrease in short-latency intracortical inhibition (SICI), and a facilitation of the first peak of facilitatory I-waves interaction (SICF). There was no correlation between the relative changes in SICI and SICF. These results demonstrate that subthreshold 5 Hz rTMS can induce lasting changes in specific neuronal subpopulations in the human corticospinal motor system, depending on the intensity and duration of rTMS. Short 5 Hz rTMS (600 stimuli) at 90% of RMT can selectively shape the excitability of distinct intracortical circuits, whereas prolonged 5 Hz rTMS (> or =900 stimuli) provokes an overall increase in excitability of the corticospinal output system, including spinal motoneurones.

  19. REPETITIVE PERIPHERAL MAGNETIC STIMULATION (15 HZ RPMS OF THE HUMAN SOLEUS MUSCLE DID NOT AFFECT SPINAL EXCITABILITY

    Directory of Open Access Journals (Sweden)

    Martin Behrens

    2011-03-01

    Full Text Available The electric field induced by repetitive peripheral magnetic stimulation (RPMS is able to activate muscles artificially due to the stimulation of deep intramuscular motor axons. RPMS applied to the muscle induces proprioceptive input to the central nervous system in different ways. Firstly, the indirect activation of mechanoreceptors and secondly, direct activation of afferent nerve fibers. The purpose of the study was to examine the effects of RPMS applied to the soleus. Thirteen male subjects received RPMS once and were investigated before and after the treatment regarding the parameters maximal M wave (Mmax, maximal H-reflex (Hmax, Hmax/Mmax-ratio, Hmax and Mmax onset latencies and plantar flexor peak twitch torque associated with Hmax (PTH. Eleven male subjects served as controls. No significant changes were observed for Hmax and PTH of the treatment group but the Hmax/Mmax-ratio increased significantly (p = 0.015 on account of a significantly decreased Mmax (p = 0.027. Hmax onset latencies were increased for the treatment group (p = 0.003 as well as for the control group (p = 0.011 while Mmax onset latencies did not change. It is concluded that the RPMS protocol did not affect spinal excitability but acted on the muscle fibres which are part of fast twitch units and mainly responsible for the generation of the maximal M wave. RPMS probably modified the integrity of neuromuscular propagation.

  20. Cortical excitability in patients with focal epilepsy: a study with high frequency repetitive transcranial magnetic stimulation (rTMS

    Directory of Open Access Journals (Sweden)

    Maria Gabriele

    2008-12-01

    Full Text Available Epileptogenesis involves an increase in excitatory synaptic strength in the brain in a manner similar to synaptic potentiation. In the present study we investigated the mechanisms of short-term synaptic potentiation in patients with focal epilepsy by using 5 Hz repetitive transcranial magnetic stimulation (rTMS, a non invasive neurophysiological technique able to investigate the mechanisms of synaptic plasticity in humans. Ten patients with focal idiopathic cortical epilepsy were studied. 5 Hz-rTMS (10 stimuli-trains, 120% of motor threshold, RMT was delivered over the first dorsal interosseus (FDI motor area of both (affected and unaffected hemispheres. Changes in the motor evoked potential (MEP size in the FDI muscle during the trains and the RMT were measured and compared between the hemispheres. 5 Hz-rTMS was also delivered in a group of healthy subjects over both hemispheres. 5 Hz-rTMS in patients elicited a reduced MEP facilitation compared to normal subjects. The reduced MEP amplitude was more evident in the affected hemisphere than in the unaffected hemisphere. RMT in the affected hemisphere was higher than in the unaffected hemisphere and in healthy subjects. Our findings showing a decreased response to 5 Hz-rTMS over the affected hemisphere, differently from the expected results suggest a reduced cortical excitability in epileptic patients. We hypothesize an altered balance between excitatory and inhibitory circuits in epileptic patients under chronic therapy.

  1. Electron transfer kinetics in purified reaction centers from the green sulfur bacterium Chlorobium tepidum studied by multiple-flash excitation.

    Science.gov (United States)

    Kusumoto, N; Sétif, P; Brettel, K; Seo, D; Sakurai, H

    1999-09-14

    Reaction center preparations from the green sulfur bacterium Chlorobium tepidum, which contain monoheme cytochrome c, were studied by flash-absorption spectroscopy in the near-UV, visible, and near-infrared regions. The decay kinetics of the photooxidized primary donor P840(+), together with the amount of photooxidized cytochrome c, were analyzed along a series of four flashes spaced by 1 ms: 95% of the P840(+) was reduced by cytochrome c with a t(1/2) of approximately 65 micros after the first flash, 80% with a t(1/2) of approximately 100 micros after the second flash, and 23% with a t(1/2) of approximately 100 micros after the third flash; after the fourth flash, almost no cytochrome c oxidation occurred. The observed rates, the establishment of redox equilibrium after each flash, and the total amount of photooxidizable cytochrome c are consistent with the presence of two equivalent cytochrome c molecules per photooxidizable P840. The data are well fitted assuming a standard free energy change DeltaG degrees of -53 meV for electron transfer from one cytochrome c to P840(+), DeltaG degrees being independent of the oxidation state of the other cytochrome c. These observations support a model with two monoheme cytochromes c which are symmetrically arranged around the reaction center core. From the ratio of menaquinone-7 to the bacteriochlorophyll pigment absorbing at 663 nm, it was estimated that our preparations contain 0.6-1.2 menaquinone-7 molecules per reaction center. However, no transient signal due to menaquinone could be observed between 360 and 450 nm in the time window from 10 ns to 4 micros. No recombination reaction between the primary partners P840(+) and A(0)(-) could be detected under normal conditions. Such a recombination was observed (t(1/2) approximately 19 ns) under highly reducing conditions or after accumulation of three electrons on the acceptor side during a series of flashes, showing that the secondary acceptors can stabilize three electrons

  2. Subharmonic resonant optical excitation of confined acoustic modes in a free-standing semiconductor membrane at GHz frequencies with a high-repetition-rate femtosecond laser.

    Science.gov (United States)

    Bruchhausen, A; Gebs, R; Hudert, F; Issenmann, D; Klatt, G; Bartels, A; Schecker, O; Waitz, R; Erbe, A; Scheer, E; Huntzinger, J-R; Mlayah, A; Dekorsy, T

    2011-02-18

    We propose subharmonic resonant optical excitation with femtosecond lasers as a new method for the characterization of phononic and nanomechanical systems in the gigahertz to terahertz frequency range. This method is applied for the investigation of confined acoustic modes in a free-standing semiconductor membrane. By tuning the repetition rate of a femtosecond laser through a subharmonic of a mechanical resonance we amplify the mechanical amplitude, directly measure the linewidth with megahertz resolution, infer the lifetime of the coherently excited vibrational states, accurately determine the system's quality factor, and determine the amplitude of the mechanical motion with femtometer resolution.

  3. Repetitive Transcranial Direct Current Stimulation Induced Excitability Changes of Primary Visual Cortex and Visual Learning Effects-A Pilot Study.

    Science.gov (United States)

    Sczesny-Kaiser, Matthias; Beckhaus, Katharina; Dinse, Hubert R; Schwenkreis, Peter; Tegenthoff, Martin; Höffken, Oliver

    2016-01-01

    Studies on noninvasive motor cortex stimulation and motor learning demonstrated cortical excitability as a marker for a learning effect. Transcranial direct current stimulation (tDCS) is a non-invasive tool to modulate cortical excitability. It is as yet unknown how tDCS-induced excitability changes and perceptual learning in visual cortex correlate. Our study aimed to examine the influence of tDCS on visual perceptual learning in healthy humans. Additionally, we measured excitability in primary visual cortex (V1). We hypothesized that anodal tDCS would improve and cathodal tDCS would have minor or no effects on visual learning. Anodal, cathodal or sham tDCS were applied over V1 in a randomized, double-blinded design over four consecutive days (n = 30). During 20 min of tDCS, subjects had to learn a visual orientation-discrimination task (ODT). Excitability parameters were measured by analyzing paired-stimulation behavior of visual-evoked potentials (ps-VEP) and by measuring phosphene thresholds (PTs) before and after the stimulation period of 4 days. Compared with sham-tDCS, anodal tDCS led to an improvement of visual discrimination learning (p visual perceptual learning and increased cortical excitability. tDCS is a promising tool to alter V1 excitability and, hence, perceptual visual learning.

  4. Excitation Wavelength Dependent O2 Release from Copper(II)-Superoxide Compounds: Laser Flash-Photolysis Experiments and Theoretical Studies

    Science.gov (United States)

    Saracini, Claudio; Liakos, Dimitrios G.; Zapata Rivera, Jhon E.; Neese, Frank; Meyer, Gerald J.; Karlin, Kenneth D.

    2014-01-01

    Irradiation of the copper(II)-superoxide synthetic complexes [(TMG3tren)CuII(O2)]+ (1) and [(PV-TMPA)CuII(O2)]+ (2) with visible light resulted in direct photo-generation of O2 gas at low temperature (from −40 °C to −70°C for 1 and from −125 °C to −135 °C for 2) in 2-methyltetrahydrofuran (MeTHF) solvent. The yield of O2 release was wavelength dependent: λexc = 436 nm, ϕ = 0.29 (for 1), ϕ = 0.11 (for 2), and λexc = 683 nm, ϕ = 0.035 (for 1), ϕ = 0.078 (for 2), which was followed by fast O2-recombination with [(TMG3tren)CuI]+ (3) and [(PV-TMPA)CuI]+ (4). Enthalpic barriers for O2 re-binding to the copper(I) center (~ 10 kJ mol−1) and for O2 dissociation from the superoxide compound 1 (45 kJ mol−1) were determined. TD-DFT studies, carried out for 1, support the experimental results confirming the dissociative character of the excited states formed upon blue or red light laser excitation. PMID:24428309

  5. 基于光导开关的重复频率闪光X光机%Repetitive rate flash X-ray generator with photo conductive semiconductor switches

    Institute of Scientific and Technical Information of China (English)

    马勋; 袁建强; 刘宏伟; 王凌云; 姜苹; 李洪涛

    2016-01-01

    A repetitive rate flash X-ray generator was developed recently to meet the demands in scientific research and in-dustrial area.A repetitive pulsed power supply was fabricated with GaAs photo conductive semiconductor switches and stacked Blumlein pulse forming networks to drive industrial X-ray diode,and a novel X-ray diode was proposed with spoked metal ceramic flashover cathode.The results show that 2 pulse burst X rays were generated under 1 kHz frame rate with novel cathode,and the two power pulses of diode and X-ray signals were identical.%采用砷化镓光导开关和Blumlein 型脉冲形成网络以级联的拓扑形式构建平顶输出功率源,驱动工业 X 光二极管产生 X 射线。提出了一种轮辐状金属-陶瓷沿面阴极,并与普通金属阴极工业 X 光二极管重复频率实验结果进行比较。研究表明:受限于阴极重复频率下的电流发射能力,普通金属阴极工业 X 光二极管难以实现1 kHz 重复频率,采用新型阴极二极管实现了1 kHz 重复频率2猝发脉冲 X 光输出,这两个脉冲的二极管功率、X 射线信号基本一致。

  6. Excitation and relaxation of metastable atomic states in an active medium of a repetitively pulsed copper vapour laser

    Energy Technology Data Exchange (ETDEWEB)

    Bokhan, P A; Zakrevskii, D E; Lavrukhin, M A [A.V. Rzhanov Institute of Semiconductor Physics, Siberian Branch of the Russian Academy of Sciences, Novosibirsk (Russian Federation); Lyabin, N A; Chursin, A D [Research and production corporation ' Istok' , Fryazino, Moscow region (Russian Federation)

    2016-02-28

    The influence of a pre-pulse population of copper atom metastable states and their sub-population at a current pulse edge on the copper vapour laser pulse energy is studied under optimal temperature conditions. Experiments have been performed with active elements of a commercial laser having an internal diameter of a discharge channel of 14 and 20 mm. It is found that at a pulse repetition frequency of 12 – 14 kHz, corresponding to a maximal output power, the reduction of the energy due to a residual population of metastable states is by an order of magnitude less than due to their sub-population at a current pulse edge. The modelling based on the experimental results obtained has shown that in the case of an active element with an internal diameter of 14 mm, a decrease in the pulse leading edge from ∼25 ns to 0.6 ns does not reduce the laser pulse energy up to the repetition frequency of ∼50 kHz at an average output power of 70 W m{sup -1} and efficiency of ∼11%. (lasers)

  7. Flash Professional CS5 Digital Classroom

    CERN Document Server

    Gerantabee, Fred

    2011-01-01

    Learn Flash in a flash with this full-color book and video training package! Adobe Flash is used by designers, game programmers, and hobbyists to create interactive Web sites, digital experiences, and mobile content. The latest release of Flash promises exciting new capabilities and this book-and-video training package makes learning the new features of Flash less intimidating. Fifteen self-paced lessons encourage you to discover essential skills and explore new aspects of Flash. The tutorials featured in the videos are each approximately five minutes long and supplement the concepts and topic

  8. Nonphotochemical quenching of excitation energy in photosystem II. A picosecond time-resolved study of the low yield of chlorophyll a fluorescence induced by single-turnover flash in isolated spinach thylakoids.

    Science.gov (United States)

    Vasil'ev, S; Bruce, D

    1998-08-04

    Chlorophyll a fluorescence emission is widely used as a noninvasive measure of a number of parameters related to photosynthetic efficiency in oxygenic photosynthetic organisms. The most important component for the estimation of photochemistry is the relative increase in fluorescence yield between dark-adapted samples which have a maximal capacity for photochemistry and a minimal fluorescence yield (F0) and light-saturated samples where photochemistry is saturated and fluorescence yield is maximal (Fm). However, when photosynthesis is saturated with a short (less than 50 micro(s)) flash of light, which induces only one photochemical turnover of photosystem II, the maximal fluorescence yield is significantly lower (Fsat) than when saturation is achieved with a millisecond duration multiturnover flash (Fm). To investigate the origins of the difference in fluorescence yield between these two conditions, our time-resolved fluorescence apparatus was modified to allow collection of picosecond time-resolved decay kinetics over a short time window immediately following a saturating single-turnover flash (Fsat) as well as after a multiturnover saturating pulse (Fm). Our data were analyzed with a global kinetic model based on an exciton radical pair equilibrium model for photosystem II. The difference between Fm and Fsat was modeled well by changing only the rate constant for quenching of excitation energy in the antenna of photosystem II. An antenna-based origin for the quenching was verified experimentally by the observation that addition of the antenna quencher 5-hydroxy-1,4-naphthoquinone to thylakoids under Fm conditions resulted in decay kinetics and modeled kinetic parameters very similar to those observed under Fsat conditions in the absence of added quinone. Our data strongly support the origin of low fluorescence yield at Fsat to be an antenna-based nonphotochemical quenching of excitation energy in photosystem II which has not usually been considered explicitly in

  9. Effect of high-frequency repetitive transcranial magnetic stimulation on motor cortical excitability and sensory nerve conduction velocity in subacute-stage incomplete spinal cord injury patients.

    Science.gov (United States)

    Cha, Hyun Gyu; Ji, Sang-Goo; Kim, Myoung-Kwon

    2016-07-01

    [Purpose] The aim of the present study was to determine whether repetitive transcranial magnetic stimulation can improve sensory recovery of the lower extremities in subacute-stage spinal cord injury patients. [Subjects and Methods] This study was conducted on 20 subjects with diagnosed paraplegia due to spinal cord injury. These 20 subjects were allocated to an experimental group of 10 subjects that underwent active repetitive transcranial magnetic stimulation or to a control group of 10 subjects that underwent sham repetitive transcranial magnetic stimulation. The SCI patients in the experimental group underwent active repetitive transcranial magnetic stimulation and conventional rehabilitation therapy, whereas the spinal cord injury patients in the control group underwent sham repetitive transcranial magnetic stimulation and conventional rehabilitation therapy. Participants in both groups received therapy five days per week for six-weeks. Latency, amplitude, and sensory nerve conduction velocity were assessed before and after the six week therapy period. [Results] A significant intergroup difference was observed for posttreatment velocity gains, but no significant intergroup difference was observed for amplitude or latency. [Conclusion] repetitive transcranial magnetic stimulation may be improve sensory recovery of the lower extremities in subacute-stage spinal cord injury patients.

  10. A study of beam position diagnostics with beam-excited dipole higher order modes using a downconverter test electronics in third harmonic 3.9 GHz superconducting accelerating cavities at FLASH

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, P. [Manchester Univ. (United Kingdom); Deutsches Elektronen-Synchrotron (DESY), Hamburg (Germany); Baboi, N.; Lorbeer, B.; Wamsat, T. [Deutsches Elektronen-Synchrotron (DESY), Hamburg (Germany); Eddy, N.; Fellenz, B.; Wendt, M. [Fermi National Accelerator Lab., Batavia, IL (United States); Jones, R.M. [Manchester Univ. (United Kingdom); The Cockcroft Institute, Daresbury (United Kingdom)

    2012-08-15

    Beam-excited higher order modes (HOM) in accelerating cavities contain transverse beam position information. Previous studies have narrowed down three modal options for beam position diagnostics in the third harmonic 3.9 GHz cavities at FLASH. Localized modes in the beam pipes at approximately 4.1 GHz and in the fifth cavity dipole band at approximately 9 GHz were found, that can provide a local measurement of the beam position. In contrast, propagating modes in the first and second dipole bands between 4.2 and 5.5 GHz can reach a better resolution. All the options were assessed with a specially designed test electronics built by Fermilab. The aim is to de ne a mode or spectral region suitable for the HOM electronics. Two data analysis techniques are used and compared in extracting beam position information from the dipole HOMs: direct linear regression and singular value decomposition. Current experiments suggest a resolution of 50 m accuracy in predicting local beam position using modes in the fifth dipole band, and a global resolution of 20 m over the complete module. Based on these results we decided to build a HOM electronics for the second dipole band and the fifth dipole band, so that we will have both high resolution measurements for the whole module, and localized measurements for individual cavity. The prototype electronics is being built by Fermilab and planned to be tested in FLASH by the end of 2012.

  11. 电磁导波激励脉冲群最佳重复频率确定%Determination on repetition frequency of electromagnetic guided wave excited by impulse cluster

    Institute of Scientific and Technical Information of China (English)

    孙钦蕾; 刘美全; 周海林

    2012-01-01

    电磁导波检测技术因其非接触耦合的特性已被广泛应用于各种金属管道无损检测领域中。但导波的激励脉冲群重复频率的确定长久以来却没有一个有效的解决方法。为此,本文提出了以有、无缺陷的重复脉冲群检测信号的相关性作为判别标准,选取电磁导波激励脉冲群最佳重复频率,并从检测信号特征提取和识别的角度验证了本文选取的激励脉冲群最佳重复频率可有效提高导波检测信号之间的区分度,减小检测信号间的干扰,提高缺陷识别的准确性。%As a result of contactless coupling, electromagnetic guided wave detection technology is used extensively to detect various metallic pipelines, however, it hasn't achieved an effective solution about reception frequency of guided wave exciting impulse cluster. So, in this paper, the correlation between flaw detection signal from repetition impulse cluster and no defect is proposed as criterion to choose optimal repetition frequency of exciting impulse cluster, through feature extraction and identification of testing signal, which is prove that it can improve efficiently discrimination degree of guided wave signals, decrease noise jamming, and advance precision of defect identification.

  12. Foundation Flash Catalyst

    CERN Document Server

    Goralski, Greg

    2010-01-01

    This book offers an introduction to Flash Catalyst for designers with intermediate to advanced skills. It discusses where Catalyst sits within the production process and how it communicates with other programs. It covers all of the features of the Flash Catalyst workspace, teaching you how to create designs from scratch, how to build application designs and add functionality, and how to master the Catalyst/Flex workflow. * Introduces Flash Catalyst * Focuses on production process * Covers the interrelation between Flash Catalyst and Photoshop/Illustrator/Flex/Flash What you'll learn Starting f

  13. NAND flash memory technologies

    CERN Document Server

    Aritome, Seiichi

    2016-01-01

    This book discusses basic and advanced NAND flash memory technologies, including the principle of NAND flash, memory cell technologies, multi-bits cell technologies, scaling challenges of memory cell, reliability, and 3-dimensional cell as the future technology. Chapter 1 describes the background and early history of NAND flash. The basic device structures and operations are described in Chapter 2. Next, the author discusses the memory cell technologies focused on scaling in Chapter 3, and introduces the advanced operations for multi-level cells in Chapter 4. The physical limitations for scaling are examined in Chapter 5, and Chapter 6 describes the reliability of NAND flash memory. Chapter 7 examines 3-dimensional (3D) NAND flash memory cells and discusses the pros and cons in structure, process, operations, scalability, and performance. In Chapter 8, challenges of 3D NAND flash memory are dis ussed. Finally, in Chapter 9, the author summarizes and describes the prospect of technologies and market for the fu...

  14. Optical Flashes Preceding GRBs

    CERN Document Server

    Paczynski, B

    2001-01-01

    Only one optical flash associated with a gamma-ray burst has been detected so far by ROTSE. There are also upper limits obtained by several groups for several bursts. Recent model calculations indicate a possibility that optical flash may precede the GRB. Such flashes are undetectable in the currently popular observing mode, with optical instruments responding to GRB triggers. There is a need to develop all sky optical monitoring system capable of recognizing flashes in real time, and more powerful instruments that could respond robotically to optical triggers and carry out follow up observations.

  15. Pro Android Flash

    CERN Document Server

    Chin, Stephen; Campesato, Oswald

    2011-01-01

    Did you know you can take your Flash skills beyond the browser, allowing you to make apps for Android, iOS and the BlackBerry Tablet OS? Build dynamic apps today starting with the easy-to-use Android smartphones and tablets. Then, take your app to other platforms without writing native code. Pro Android Flash is the definitive guide to building Flash and other rich Internet applications (RIAs) on the Android platform. It covers the most popular RIA frameworks for Android developers - Flash and Flex - and shows how to build rich, immersive user experiences on both Android smartphones and tablet

  16. Rh-flash acquisition card

    CERN Document Server

    Bourrion, O

    2003-01-01

    The rh-flash card main purpose is to convert and store the image of the analog data present at input into an output buffer, namely in a given timing window besides a stop signal (like a digital oscilloscope). It is conceived in VME format 1U wide with an additional connector. Novelty of this card is its ability to sample at a high frequency, due to flash coders, and this at a high repetition rate. To do that the card allows the storage of the data considered 'useful' and that is done by storing only the data exceeding a certain threshold. This can be useful for instance for viewing peaks in a spectrum, and obtaining their relative location. The goal is to stock and process the data sampled before and after the arrival of a stop signal (what entails a storage depth). A threshold is defined and any peak exceeding its level will really be stored in the output buffer which is readable through the VME bus. The peak values will be stored as well as m preceding and n subsequent values (both programmable). Obviously,...

  17. Flash-Type Discrimination

    Science.gov (United States)

    Koshak, William J.

    2010-01-01

    This viewgraph presentation describes the significant progress made in the flash-type discrimination algorithm development. The contents include: 1) Highlights of Progress for GLM-R3 Flash-Type discrimination Algorithm Development; 2) Maximum Group Area (MGA) Data; 3) Retrieval Errors from Simulations; and 4) Preliminary Global-scale Retrieval.

  18. Understanding Green Flashes

    Science.gov (United States)

    Young, Andrew T.

    1998-05-01

    Most astronomers learn about green flashes from either Minnaert's old book (Dover, 1954) or O'Connell's ``The Green Flash....'' Both have defects. Minnaert's account mostly represents what was known in the 1920s; it repeats Mulder's 3-fold classification, which omits Joule's second type of flash --- the one most commonly seen from mountain observatories. O'Connell searched only the astronomical literature, missing Dietze's crucially important paper (Z.f.Met. 9, 169 (1955)) showing that the ``textbook'' mechanism cannot produce flashes visible to the naked eye. He also erred in thinking that distortions of the setting Sun arise in the upper atmosphere (they are due to the marine boundary layer), and copied an error from Feenstra Kuiper's thesis that misidentified a common mirage-like phenomenon as Wegener's ``blank strip'' (Young et al., Appl. Opt. 36, 2689 (1997).) Most phenomena shown in O'Connell's book are caused by inversion layers below eye level, not above as in Wegener's phenomenon. The two commonest forms of green flash are associated with the inferior mirage and the mock mirage, corresponding to Fisher's Type A and Type B sunsets, respectively. Superrefraction, advocated by Wood and by Rayleigh as the cause of large flashes, actually suppress them: the airmass is proportional to the refraction (by Laplace's extinction theorem), so no green is transmitted when refraction is much larger than average. Although there is a physical green flash that can be photographed, the colors seen at sunset are strongly modified by bleaching of the L cones. Most ``green'' sunset flashes are actually yellow. Writers should stop representing Jules Verne's ``ancient legend'' as fact, as it was invented by Verne as a plot device for his novel ``Le Rayon Vert.'' Green-flash photos and simulations will be shown. This material is based upon work supported by the NSF under Award No. ATM-9714357.

  19. Floods and Flash Flooding

    Science.gov (United States)

    Floods and flash flooding Now is the time to determine your area’s flood risk. If you are not sure whether you ... If you are in a floodplain, consider buying flood insurance. Do not drive around barricades. If your ...

  20. Professional Flash Lite Mobile Development

    CERN Document Server

    Anderson, J G

    2010-01-01

    Discover how to create Flash Lite mobile apps from the ground up. Adobe Flash is an ideal choice for developing rich interactive content for "Flash-enabled" mobile devices; and with this book, you'll learn how to create unique applications with Flash Lite. Through a series of code samples and extensive example applications, you'll explore the core concepts, key features, and best practices of the Flash Lite player. Coverage reveals various ways to develop Flash mobile content, create applications with a cross-platform programming framework based on the Model, View and Controller conc

  1. Foundation Flash Cartoon Animation

    CERN Document Server

    Jones, Tim; Rosson, Allan S

    2008-01-01

    One of Flash s most common uses is still animation for cartoons, games, advertising etc, and this book takes a fresh look at the topic, breaking it down pre-production, production, and post production, and looking at each section in detail, and covering topics such as storyboarding, character libraries and camera mechanics like no Flash book has before. The book is written by members of the Emmy award winning ANIMAX team, who have created work for clients such as Disney, AOL, Fox, WWE, ESPN, and Sesame workshop. This book is an opportunity for them to share their secrets, and is written to sui

  2. Learning Flash CS4 Professional

    CERN Document Server

    Shupe, Rich

    2009-01-01

    Learning Flash CS4 Professional offers beginners and intermediate Flash developers a unique introduction to the latest version of Adobe's powerful multimedia application. This easy-to-read book is loaded with full-color examples and hands-on tasks to help you master Flash CS4's new motion editor, integrated 3D system, and character control using the new inverse kinematics bones animation system. No previous Flash experience is necessary.

  3. Flash Builder and Flash Catalyst The New Workflow

    CERN Document Server

    Peeters, Steven

    2010-01-01

    The Flash Platform is changing. Flash Builder and Flash Catalyst have brought a new separation of design and coding to web development that enables a much more efficient and streamlined workflow. For designers and developers used to the close confines of Flash, this is a hugely liberating but at first alien concept. This book teaches you the new workflow for the Flash platform. It gives an overview of the technologies involved and provides you with real-world project examples and best-practice guidelines to get from design to implementation with the tools at hand. * Includes many examples* Foc

  4. Jaan Toomik Flash Artis

    Index Scriptorium Estoniae

    1999-01-01

    1999. a. mai-juuni 'Flash Artis' on ajakirja Eesti korrespondendi Ando Keskküla artikkel Jaan Toomikust. Jaan Toomik on kutsutud esinema Londoni The Photographers' Gallery grupinäitusele, tema videot 'Father and Son' näidatakse Londonis avataval näitusel 'Near and Elsewhere' 11.-24. juunini

  5. Inessa Josing Flash Artis

    Index Scriptorium Estoniae

    1999-01-01

    'Flash Art'i' 1998. a. nov.-dets. numbris Rosa Martínezi artiklis suvisest Manifesta II näitusest Luxembourg'is on positiivselt mainitud ka Inessa Josingut. Illustratsiooniks toodud seitsmest fotost ühel on I. Josingu aknakujundus 'What Must I Do to be Saved?'

  6. Inessa Josing Flash Artis

    Index Scriptorium Estoniae

    1999-01-01

    'Flash Art'i' 1998. a. nov.-dets. numbris Rosa Martínezi artiklis suvisest Manifesta II näitusest Luxembourg'is on positiivselt mainitud ka Inessa Josingut. Illustratsiooniks toodud seitsmest fotost ühel on I. Josingu aknakujundus 'What Must I Do to be Saved?'

  7. Jaan Toomik Flash Artis

    Index Scriptorium Estoniae

    1999-01-01

    1999. a. mai-juuni 'Flash Artis' on ajakirja Eesti korrespondendi Ando Keskküla artikkel Jaan Toomikust. Jaan Toomik on kutsutud esinema Londoni The Photographers' Gallery grupinäitusele, tema videot 'Father and Son' näidatakse Londonis avataval näitusel 'Near and Elsewhere' 11.-24. juunini

  8. Repetitive maladaptive behavior: beyond repetition compulsion.

    Science.gov (United States)

    Bowins, Brad

    2010-09-01

    Maladaptive behavior that repeats, typically known as repetition compulsion, is one of the primary reasons that people seek psychotherapy. However, even with psychotherapeutic advances it continues to be extremely difficult to treat. Despite wishes and efforts to the contrary repetition compulsion does not actually achieve mastery, as evidenced by the problem rarely resolving without therapeutic intervention, and the difficulty involved in producing treatment gains. A new framework is proposed, whereby such behavior is divided into behavior of non-traumatic origin and traumatic origin with some overlap occurring. Repetitive maladaptive behavior of non-traumatic origin arises from an evolutionary-based process whereby patterns of behavior frequently displayed by caregivers and compatible with a child's temperament are acquired and repeated. It has a familiarity and ego-syntonic aspect that strongly motivates the person to retain the behavior. Repetitive maladaptive behavior of traumatic origin is characterized by defensive dissociation of the cognitive and emotional components of trauma, making it very difficult for the person to integrate the experience. The strong resistance of repetitive maladaptive behavior to change is based on the influence of both types on personality, and also factors specific to each. Psychotherapy, although very challenging at the best of times, can achieve the mastery wished and strived for, with the aid of several suggestions provided.

  9. Mechanism of red-luminescence flash in CdS single crystals irradiated by electrons

    Energy Technology Data Exchange (ETDEWEB)

    Bogdanyuk, N.S.; Galushka, A.P.; Ostapenko, S.S.; Shejnkman, M.K. (AN Ukrainskoj SSR, Kiev. Inst. Poluprovodnikov)

    1984-02-01

    Results of investigations into ''red''-luminescence flash (lambdasub(x)=720 nm) in cadmium sulfide, irradiated by electrons at 77 K, are presented. Measurement of spectra of stationary photoluminescence and its excitation, as well as flash luminescence, its pumping and stimulation along with temperature flash dependences enabled to suggest a new mechanism of optical luminescence stimulation, based on the model of complex center of flash luminescense. The mechanism consists in modulation of probabilities of intercenter electron transitions, when charge state of one of components of the complex center changes.

  10. Document Flash Thermography

    OpenAIRE

    Larsen, Cory; Baker, Doran

    2011-01-01

    This paper presents an extension of flash thermography techniques to the analysis of documents. Motivation for this research is to develop the ability to reveal covered writings in archaeological artifacts such as the Codex Selden or Egyptian Cartonnage. An emphasis is placed on evaluating several common existing signal processing techniques for their effectiveness in enhancing subsurface writings found within a set of test documents. These processing techniques include: contrast stretching, ...

  11. The lightning flash

    CERN Document Server

    Cooray, Vernon

    2014-01-01

    With contributions from today's leading lightning engineers and researchers, this updated 2nd edition of Vernon Cooray's classic text, The Lightning Flash provides the reader with an essential introduction to lightning and its impact on electrical and electronic equipment. Providing the reader with a thorough background into almost every aspect of lightning and its impact on electrical and electronic equipment, this new edition is updated throughout and features eight new chapters that bring the science up to date.

  12. Flash Lidar Data Processing

    Science.gov (United States)

    Bergkoetter, M. D.; Ruppert, L.; Weimer, C. S.; Ramond, T.; Lefsky, M. A.; Burke, I. C.; Hu, Y.

    2009-12-01

    Late last year, a prototype Flash LIDAR instrument flew on a series of airborne tests to demonstrate its potential for improved vegetation measurements. The prototype is a precursor to the Electronically Steerable Flash LIDAR (ESFL) currently under development at Ball Aerospace and Technology Corp. with funding from the NASA Earth Science Technology Office. ESFL may soon significantly expand our ability to measure vegetation and forests and better understand the extent of their role in global climate change and the carbon cycle - all critical science questions relating to the upcoming NASA DESDynI and ESA BIOMASS missions. In order to more efficiently exploit data returned from the experimental Flash Lidar system and plan for data exploitation from future flights, Ball funded a graduate student project (through the Ball Summer Intern Program, summer 2009) to develop and implement algorithms for post-processing of the 3-Dimensional Flash Lidar data. This effort included developing autonomous algorithms to resample the data to a uniform rectangular grid, geolocation of the data, and visual display of large swaths of data. The resampling, geolocation, surface hit detection, and aggregation of frame data are implemented with new MATLAB code, and the efficient visual display is achieved with free commercial viewing software. These efforts directly support additional tests flights planned as early as October 2009, including possible flights over Niwot Ridge, CO, for which there is ICESat data, and a sea-level coastal area in California to test the effect of higher altitude (above ground level) on the divergence of the beams and the beam spot sizes.

  13. Physics Flash December 2016

    Energy Technology Data Exchange (ETDEWEB)

    Kippen, Karen Elizabeth [Los Alamos National Lab. (LANL), Los Alamos, NM (United States). ADEPS Communications

    2016-12-01

    This is the December 2016 issue of Physics Flash, the newsletter of the Physics Division of Los Alamos National Laboratory (LANL). In this issue, the following topics are covered: Novel liquid helium technique to aid highly sensitive search for a neutron electrical dipole moment; Silverleaf: Prototype Red Sage experiments performed at Q-site; John L. Kline named 2016 APS Fellow; Physics students in the news; First Entropy Engine quantum random number generator hits the market; and celebrating service.

  14. Physics Flash August 2016

    Energy Technology Data Exchange (ETDEWEB)

    Kippen, Karen Elizabeth [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-08-25

    Physics Flash is the newsletter for the Physics Division at Los Alamos National Laboratory. This newsletter is for August 2016. The following topics are covered: "Accomplishments in the Trident Laser Facility", "David Meyerhofer elected as chair-elect APS Nominating Committee", "HAWC searches for gamma rays from dark matter", "Proton Radiography Facility commissions electromagnetic magnifier", and "Cosmic ray muon computed tomography of spent nuclear fuel in dry storage casks."

  15. Desorption of deuterium from beryllium codeposits using flash heating

    Science.gov (United States)

    Yu, J. H.; Baldwin, M. J.; Doerner, R. P.; Pitts, R. A.; Smirnov, R. D.; Xu, H. W.

    2013-07-01

    As a result of safety concerns, limits will be placed on the allowable tritium inventory retained inside the ITER vacuum vessel. The primary motivation for the present work is to test the proposed method of removing tritium from main chamber codeposits using radiative heat flashing from controlled ITER plasma shutdowns. Detritiation of Be codeposits is studied in the PISCES-B facility using flash-heating by a 10 ms laser with up to 2 MJ/m2 of absorbed energy density. Three types of codeposits are flash-heated with layer thickness ranging from 0.1 to 1.2 μm. Less than 25% of the D in the Be layer escapes at ITER-relevant flash energy densities and with peak surface temperature up to ˜900 °C. Repetitive flashing with peak surface temperature of 400-500 °C results in an increased population of higher energy trap sites, implying that transient heating which causes appropriate surface temperature excursion redistributes D among codeposit trap sites.

  16. Laser Flash Photolysis Studies on Gallic Acid

    Institute of Scientific and Technical Information of China (English)

    ZHU Hong-Ping; ZHAO Hong-Wei; ZHANG Zhao-Xia; WANG Wen-Feng; YAO Si-De

    2006-01-01

    The transient species of gallic acid (GA) have been studied by 266 nm nanosecond laser flash photolysis in aqueous solution and acetonitrile. The intermediate with absorption at 320 nm was identified as excited triplet state (3GA*), the decay rates of which were obtained in aqueous solution and acetonitrile respectively. Energy transfer from 3GA* to β-carotene was observed and the energy transfer rate constant kent was determined to be 2.2 × 109 mol-1·L·s-1. GA underwent photoionization during photolysis and the quantum yield of photoionization was determined to be 0.12 at room temperature with KI as a reference.

  17. Grammatical Change through Repetition.

    Science.gov (United States)

    Arevart, Supot

    1989-01-01

    The effect of repetition on grammatical change in an unrehearsed talk is examined based on a case study of a single learner. It was found that repetition allows for accuracy monitoring in that errors committed in repeated contexts undergo correction. Implications for teaching are discussed. (23 references) (LB)

  18. The Negative Repetition Effect

    Science.gov (United States)

    Mulligan, Neil W.; Peterson, Daniel J.

    2013-01-01

    A fundamental property of human memory is that repetition enhances memory. Peterson and Mulligan (2012) recently documented a surprising "negative repetition effect," in which participants who studied a list of cue-target pairs twice recalled fewer targets than a group who studied the pairs only once. Words within a pair rhymed, and…

  19. Roles of repetitive sequences

    Energy Technology Data Exchange (ETDEWEB)

    Bell, G.I.

    1991-12-31

    The DNA of higher eukaryotes contains many repetitive sequences. The study of repetitive sequences is important, not only because many have important biological function, but also because they provide information on genome organization, evolution and dynamics. In this paper, I will first discuss some generic effects that repetitive sequences will have upon genome dynamics and evolution. In particular, it will be shown that repetitive sequences foster recombination among, and turnover of, the elements of a genome. I will then consider some examples of repetitive sequences, notably minisatellite sequences and telomere sequences as examples of tandem repeats, without and with respectively known function, and Alu sequences as an example of interspersed repeats. Some other examples will also be considered in less detail.

  20. Roles of repetitive sequences

    Energy Technology Data Exchange (ETDEWEB)

    Bell, G.I.

    1991-12-31

    The DNA of higher eukaryotes contains many repetitive sequences. The study of repetitive sequences is important, not only because many have important biological function, but also because they provide information on genome organization, evolution and dynamics. In this paper, I will first discuss some generic effects that repetitive sequences will have upon genome dynamics and evolution. In particular, it will be shown that repetitive sequences foster recombination among, and turnover of, the elements of a genome. I will then consider some examples of repetitive sequences, notably minisatellite sequences and telomere sequences as examples of tandem repeats, without and with respectively known function, and Alu sequences as an example of interspersed repeats. Some other examples will also be considered in less detail.

  1. Repetition and Translation Shifts

    Directory of Open Access Journals (Sweden)

    Simon Zupan

    2006-06-01

    Full Text Available Repetition manifests itself in different ways and at different levels of the text. The first basic type of repetition involves complete recurrences; in which a particular textual feature repeats in its entirety. The second type involves partial recurrences; in which the second repetition of the same textual feature includes certain modifications to the first occurrence. In the article; repetitive patterns in Edgar Allan Poe’s short story “The Fall of the House of Usher” and its Slovene translation; “Konec Usherjeve hiše”; are compared. The author examines different kinds of repetitive patterns. Repetitions are compared at both the micro- and macrostructural levels. As detailed analyses have shown; considerable microstructural translation shifts occur in certain types of repetitive patterns. Since these are not only occasional; sporadic phenomena; but are of a relatively high frequency; they reduce the translated text’s potential for achieving some of the gothic effects. The macrostructural textual property particularly affected by these shifts is the narrator’s experience as described by the narrative; which suffers a reduction in intensity.

  2. Flash Point Performance Evaluation

    Science.gov (United States)

    2014-03-01

    7094 Grabner D3828B Seta Flash CL12-3453 42.5 43.8 43.8 47.7 44.3 47.3 42.0 42.5 43.8 43.8 47.7 45.3 47.2 42.0 CL12-3475 58.5 61.7 58.7 59.7 61.3...division of Petroleum Analyzers Company (PAC) Houston, TX 14. Herzog is division of PAC 15. Stanhope- Seta , London, UK 16. Grabner Instruments is a

  3. Methods of flash sintering

    Energy Technology Data Exchange (ETDEWEB)

    Raj, Rishi; Cologna, Marco; Francis, John S.

    2016-05-10

    This disclosure provides methods of flash sintering and compositions created by these methods. Methods for sintering multilayered bodies are provided in which a sintered body is produced in less than one minute. In one aspect, each layer is of a different composition, and may be constituted wholly from a ceramic or from a combination of ceramic and metallic particles. When the body includes a layer of an anode composition, a layer of an electrolyte composition and a layer of a cathode composition, the sintered body can be used to produce a solid oxide fuel cell.

  4. Trialogue: Preparation, Repetition and...

    Science.gov (United States)

    Oberg, Antoinette; And Others

    1996-01-01

    This paper interrogates both curriculum theory and the limits and potentials of textual forms. A set of overlapping discourses (a trialogue) focuses on inquiring into the roles of obsession and repetition in creating deeply interpretive locations for understanding. (SM)

  5. Geomorphological factors of flash floods

    Science.gov (United States)

    Kuznetsova, Yulia

    2016-04-01

    Growing anthropogenic load, rise of extreme meteorological events frequency and total precipitation depth often lead to increasing danger of catastrophic fluvial processes worldwide. Flash floods are one of the most dangerous and less understood types of them. Difficulties of their study are mainly related to short duration of single events, remoteness and hard access to origin areas. Most detailed researches of flash floods focus on hydrological parameters of the flow itself and its meteorological factors. At the same time, importance of the basin geological and geomorphological structure for flash floods generation and the role they play in global sediment redistribution is yet poorly understood. However, understanding and quantitative assessment of these features is a real basis for a complete concept of factors, characteristics and dynamics of flash floods. This work is a review of published data on flash floods, and focuses on the geomorphological factors of the phenomenon. We consider both individual roles and interactions between different geomorphological features (the whole basin parameters, characteristics of the single slopes and valley bottom). Special attention is paid to critical values of certain factors. This approach also highlights the gaps or less studied factors of flash floods. Finally, all data is organized into a complex diagram that may be used for flash floods modeling. This also may help to reach a new level of flash flood predictions and risk assessment.

  6. Flashing LEDs for Microalgal Production.

    Science.gov (United States)

    Schulze, Peter S C; Guerra, Rui; Pereira, Hugo; Schüler, Lisa M; Varela, João C S

    2017-08-30

    Flashing lights are next-generation tools to mitigate light attenuation and increase the photosynthetic efficiency of microalgal cultivation systems illuminated by light-emitting diodes (LEDs). Optimal flashing light conditions depend on the reaction kinetics and properties of the linear electron transfer chain, energy dissipation, and storage mechanisms of a phototroph. In particular, extremely short and intense light flashes potentially mitigate light attenuation in photobioreactors without impairing photosynthesis. Intelligently controlling flashing light units and selecting electronic components can maximize light emission and energy efficiency. We discuss the biological, physical, and technical properties of flashing lights for algal production. We combine recent findings about photosynthetic pathways, self-shading in photobioreactors, and developments in solid-state technology towards the biotechnological application of LEDs to microalgal production. Copyright © 2017 Elsevier Ltd. All rights reserved.

  7. Step & flash imprint lithography

    Directory of Open Access Journals (Sweden)

    Douglas J. Resnick

    2005-02-01

    Full Text Available The escalating cost of next generation lithography (NGL is driven in part by the need for complex sources and optics. The cost for a single NGL tool could soon exceed $50 million, a prohibitive amount for many companies. As a result, several research groups are looking at alternative, low-cost methods for printing sub-100 nm features. Many of these methods are limited in their ability to do precise overlay. In 1999, Willson and Sreenivasan developed step and flash imprint lithography (S-FIL™. The use of a quartz template opens up the potential for optical alignment of the wafer and template. This paper reviews several key aspects of the S-FIL process, including template, tool, ultraviolet (UV-curable monomer, and pattern transfer. Two applications are also presented: contact holes and surface acoustic wave (SAW filters.

  8. Development of a multi-flash lamp in pulse photo conductivity method

    Science.gov (United States)

    Fukashi, J.; Ndagijimana, J.; Soh, Y.; Kobayashi, K.; Furuta, M.; Kubota, Hiroshi

    2013-12-01

    In the manufacturing field of semiconductor devices, improvement of yield and increase of throughput is very important issue. Therefore, in the evaluation of semiconductor devices, a method using a light source is frequently used for in-line measurement. In our laboratory, we propose Pulsed Photo Conductivity Method (PPCM) as a device evaluation method for non-destructive and non-contact measurement. To inspect the whole wafer in one minute using PPCM evaluation equipment, high repetition frequency lamp is required .In general, laser is used as light source in device evaluation using light. Laser has a high repetition frequency, but the cost is very high compared with other light sources. Therefore, in this study, we developed a multi-flash system to be used for PPCM evaluation equipment. This system is a high repetition frequency and cheaper. In this study, the maximum repetition frequency of an L11035 Hamamatsu xenon flash lamp used is 530Hz which is not high. Therefore, we developed a light source with high repetition frequency by using several xenon flash lamps in this system.

  9. Gone in a Flash: Manipulation of Audiovisual Temporal Integration Using Transcranial Magnetic Stimulation

    Directory of Open Access Journals (Sweden)

    Roy eHamilton

    2013-09-01

    Full Text Available While converging evidence implicates the right inferior parietal lobule in audiovisual integration, its role has not been fully elucidated by direct manipulation of cortical activity. Replicating and extending an experiment initially reported by Kamke, Vieth, Cottrell, and Mattingley (2012, we employed the sound-induced flash illusion, in which a single visual flash, when accompanied by two auditory tones, is misperceived as multiple flashes (Wilson, 1987; Shams, et al., 2000. Slow repetitive (1Hz TMS administered to the right angular gyrus, but not the right supramarginal gyrus, induced a transient decrease in the Peak Perceived Flashes (PPF, reflecting reduced susceptibility to the illusion. This finding independently confirms that perturbation of networks involved in multisensory integration can result in a more veridical representation of asynchronous auditory and visual events and that cross-modal integration is an active process in which the objective is the identification of a meaningful constellation of inputs, at times at the expense of accuracy.

  10. Gone in a flash: manipulation of audiovisual temporal integration using transcranial magnetic stimulation

    Science.gov (United States)

    Hamilton, Roy H.; Wiener, Martin; Drebing, Daniel E.; Coslett, H. Branch

    2013-01-01

    While converging evidence implicates the right inferior parietal lobule in audiovisual integration, its role has not been fully elucidated by direct manipulation of cortical activity. Replicating and extending an experiment initially reported by Kamke et al. (2012), we employed the sound-induced flash illusion, in which a single visual flash, when accompanied by two auditory tones, is misperceived as multiple flashes (Wilson, 1987; Shams et al., 2000). Slow repetitive (1 Hz) TMS administered to the right angular gyrus, but not the right supramarginal gyrus, induced a transient decrease in the Peak Perceived Flashes (PPF), reflecting reduced susceptibility to the illusion. This finding independently confirms that perturbation of networks involved in multisensory integration can result in a more veridical representation of asynchronous auditory and visual events and that cross-modal integration is an active process in which the objective is the identification of a meaningful constellation of inputs, at times at the expense of accuracy. PMID:24062701

  11. Gone in a flash: manipulation of audiovisual temporal integration using transcranial magnetic stimulation.

    Science.gov (United States)

    Hamilton, Roy H; Wiener, Martin; Drebing, Daniel E; Coslett, H Branch

    2013-01-01

    While converging evidence implicates the right inferior parietal lobule in audiovisual integration, its role has not been fully elucidated by direct manipulation of cortical activity. Replicating and extending an experiment initially reported by Kamke et al. (2012), we employed the sound-induced flash illusion, in which a single visual flash, when accompanied by two auditory tones, is misperceived as multiple flashes (Wilson, 1987; Shams et al., 2000). Slow repetitive (1 Hz) TMS administered to the right angular gyrus, but not the right supramarginal gyrus, induced a transient decrease in the Peak Perceived Flashes (PPF), reflecting reduced susceptibility to the illusion. This finding independently confirms that perturbation of networks involved in multisensory integration can result in a more veridical representation of asynchronous auditory and visual events and that cross-modal integration is an active process in which the objective is the identification of a meaningful constellation of inputs, at times at the expense of accuracy.

  12. Temporal Parameter Optimization in Four-Dimensional Flash Trajectory Imaging

    Institute of Scientific and Technical Information of China (English)

    WANG Xin-Wei; ZHOU Yan; FAN Song-Tao; LIU Yu-Liang

    2011-01-01

    In four-dimensional fiash trajectory imaging, temporal parameters include time delay, laser pulse width, gate time, pulse pair repetition frequency and the frame rate of CCD, which directly impact on the acquisition of target trajectories over time. We propose a method of optimizing the temporal parameters of flash trajectory imaging. All the temporal parameters can be estimated by the spatial parameters of the volumes of interest, target scale and velocity, and target sample number. The formulae for optimizing temporal parameters are derived, and the method is demonstrated in an experiment with a ball oscillating as a pendulum.%In four-dimensional flash trajectory imaging,temporal parameters include time delay,laser pulse width,gate time,pulse pair repetition frequency and the frame rate of CCD,which directly impact on the acquisition of target trajectories over time.We propose a method of optimizing the temporal parameters of flash trajectory imaging.All the temporal parameters can be estimated by the spatial parameters of the volumes of interest,target scale and velocity,and target sample number.The formulae for optimizing temporal parameters are derived,and the method is demonstrated in an experiment with a ball oscillating as a pendulum.Four-dimensional flash trajectory imaging (FTI)based on time-delay-modulated range-gated viewing can directly image the trajectories of moving objects with backgrounds filtered and deduce target 3D positions over time,[1] which has potentials in astronomy,remote sensing and biomedical applications.[2 4] Temporal parameters are crucial for FTI.An unreasonable setting of temporal parameters will lead to failure in obtaining target trajectories.However,in the previous work,[1] the optimization of temporal parameters has not been discussed in detail.Therefore,in this Letter we give a method of estimating the temporal parameters of FTI.

  13. Clinical application of repetitive transcranial magnetic stimulation in stroke rehabilitation☆

    Science.gov (United States)

    Shin, Joonho; Yang, EunJoo; Cho, KyeHee; Barcenas, Carmelo L; Kim, Woo Jin; Min, Yusun; Paik, Nam-Jong

    2012-01-01

    Proper stimulation to affected cerebral hemisphere would promote the functional recovery of patients with stroke. Effects of repetitive transcranial magnetic stimulation on cortical excitability can be can be altered by the stimulation frequency, intensity and duration. There has been no consistent recognition regarding the best stimulation frequency and intensity. This study reviews the intervention effects of repetitive transcranial stimulation on motor impairment, dysphagia, visuospatial neglect and aphasia, and summarizes the stimulation frequency, intensity and area for repetitive transcranial magnetic stimulation to yield the best therapeutic effects. PMID:25745455

  14. Clinical application of repetitive transcranial magnetic stimulation in stroke rehabilitation

    Institute of Scientific and Technical Information of China (English)

    Joonho Shin; EunJoo Yang; KyeHee Cho; Carmelo L Barcenas; Woo Jin Kim; Yusun Min; Nam-Jong Paik

    2012-01-01

    Proper stimulation to affected cerebral hemisphere would promote the functional recovery of patients with stroke. Effects of repetitive transcranial magnetic stimulation on cortical excitability can be can be altered by the stimulation frequency, intensity and duration. There has been no consistent recognition regarding the best stimulation frequency and intensity. This study reviews the intervention effects of repetitive transcranial stimulation on motor impairment, dysphagia, visuospatial neglect and aphasia, and summarizes the stimulation frequency, intensity and area for repetitive transcranial magnetic stimulation to yield the best therapeutic effects.

  15. Flash sintering of ceramic materials

    OpenAIRE

    Dancer, C. E. J.

    2016-01-01

    During flash sintering, ceramic materials can sinter to high density in a matter of seconds while subjected to electric field and elevated temperature. This process, which occurs at lower furnace temperatures and in shorter times than both conventional ceramic sintering and field-assisted methods such as spark plasma sintering, has the potential to radically reduce the power consumption required for the densification of ceramic materials. This paper reviews the experimental work on flash sint...

  16. Novel porcine repetitive elements

    Directory of Open Access Journals (Sweden)

    Nonneman Dan J

    2006-12-01

    Full Text Available Abstract Background Repetitive elements comprise ~45% of mammalian genomes and are increasingly known to impact genomic function by contributing to the genomic architecture, by direct regulation of gene expression and by affecting genomic size, diversity and evolution. The ubiquity and increasingly understood importance of repetitive elements contribute to the need to identify and annotate them. We set out to identify previously uncharacterized repetitive DNA in the porcine genome. Once found, we characterized the prevalence of these repeats in other mammals. Results We discovered 27 repetitive elements in 220 BACs covering 1% of the porcine genome (Comparative Vertebrate Sequencing Initiative; CVSI. These repeats varied in length from 55 to 1059 nucleotides. To estimate copy numbers, we went to an independent source of data, the BAC-end sequences (Wellcome Trust Sanger Institute, covering approximately 15% of the porcine genome. Copy numbers in BAC-ends were less than one hundred for 6 repeat elements, between 100 and 1000 for 16 and between 1,000 and 10,000 for 5. Several of the repeat elements were found in the bovine genome and we have identified two with orthologous sites, indicating that these elements were present in their common ancestor. None of the repeat elements were found in primate, rodent or dog genomes. We were unable to identify any of the replication machinery common to active transposable elements in these newly identified repeats. Conclusion The presence of both orthologous and non-orthologous sites indicates that some sites existed prior to speciation and some were generated later. The identification of low to moderate copy number repetitive DNA that is specific to artiodactyls will be critical in the assembly of livestock genomes and studies of comparative genomics.

  17. Flashing light in microalgae biotechnology.

    Science.gov (United States)

    Abu-Ghosh, Said; Fixler, Dror; Dubinsky, Zvy; Iluz, David

    2016-03-01

    Flashing light can enhance photosynthesis and improve the quality and quantity of microalgal biomass, as it can increase the products of interest by magnitudes. Therefore, the integration of flashing light effect into microalgal cultivation systems should be considered. However, microalgae require a balanced mix of the light/dark cycle for higher growth rates, and respond to light intensity differently according to the pigments acquired or lost during the growth. This review highlights recently published results on flashing light effect on microalgae and its applications in biotechnology, as well as the recently developed bioreactors designed to fulfill this effect. It also discusses how this knowledge can be applied in selecting the optimal light frequencies and intensities with specific technical properties for increasing biomass production and/or the yield of the chemicals of interest by microalgae belonging to different genera.

  18. Mitochondrial Flash: Integrative Reactive Oxygen Species and pH Signals in Cell and Organelle Biology.

    Science.gov (United States)

    Wang, Wang; Gong, Guohua; Wang, Xianhua; Wei-LaPierre, Lan; Cheng, Heping; Dirksen, Robert; Sheu, Shey-Shing

    2016-09-20

    Recent breakthroughs in mitochondrial research have advanced, reshaped, and revolutionized our view of the role of mitochondria in health and disease. These discoveries include the development of novel tools to probe mitochondrial biology, the molecular identification of mitochondrial functional proteins, and the emergence of new concepts and mechanisms in mitochondrial function regulation. The discovery of "mitochondrial flash" activity has provided unique insights not only into real-time visualization of individual mitochondrial redox and pH dynamics in live cells but has also advanced understanding of the excitability, autonomy, and integration of mitochondrial function in vivo. The mitochondrial flash is a transient and stochastic event confined within an individual mitochondrion and is observed in a wide range of organisms from plants to Caenorhabditis elegans to mammals. As flash events involve multiple transient concurrent changes within the mitochondrion (e.g., superoxide, pH, and membrane potential), a number of different mitochondrial targeted fluorescent indicators can detect flash activity. Accumulating evidence indicates that flash events reflect integrated snapshots of an intermittent mitochondrial process arising from mitochondrial respiration chain activity associated with the transient opening of the mitochondrial permeability transition pore. We review the history of flash discovery, summarize current understanding of flash biology, highlight controversies regarding the relative roles of superoxide and pH signals during a flash event, and bring forth the integration of both signals in flash genesis. Investigations using flash as a biomarker and establishing its role in cell signaling pathway will move the field forward. Antioxid. Redox Signal. 25, 534-549.

  19. Flash sintering of ceramic materials

    Science.gov (United States)

    Dancer, C. E. J.

    2016-10-01

    During flash sintering, ceramic materials can sinter to high density in a matter of seconds while subjected to electric field and elevated temperature. This process, which occurs at lower furnace temperatures and in shorter times than both conventional ceramic sintering and field-assisted methods such as spark plasma sintering, has the potential to radically reduce the power consumption required for the densification of ceramic materials. This paper reviews the experimental work on flash sintering methods carried out to date, and compares the properties of the materials obtained to those produced by conventional sintering. The flash sintering process is described for oxides of zirconium, yttrium, aluminium, tin, zinc, and titanium; silicon and boron carbide, zirconium diboride, materials for solid oxide fuel applications, ferroelectric materials, and composite materials. While experimental observations have been made on a wide range of materials, understanding of the underlying mechanisms responsible for the onset and latter stages of flash sintering is still elusive. Elements of the proposed theories to explain the observed behaviour include extensive Joule heating throughout the material causing thermal runaway, arrested by the current limitation in the power supply, and the formation of defect avalanches which rapidly and dramatically increase the sample conductivity. Undoubtedly, the flash sintering process is affected by the electric field strength, furnace temperature and current density limit, but also by microstructural features such as the presence of second phase particles or dopants and the particle size in the starting material. While further experimental work and modelling is still required to attain a full understanding capable of predicting the success of the flash sintering process in different materials, the technique non-etheless holds great potential for exceptional control of the ceramic sintering process.

  20. Flash Builder building user interaction

    CERN Document Server

    Rocchi, Cesare

    2010-01-01

    Develop a working understanding of events and components, and containers and states so you can build and deploy RIAs in Flex. Work through a demo implementation of a login panel that employs feedback from the server side, to hone your understanding. Use the validators and the debugger to inspect your code execution. Building User Interaction is the second of five articles that will be compiled in the book, Data Visualization with Flash Builder: Designing RIA and AIR Applications with Remote Data Sources. Each full-color article illustrates specific aspects of Flash Builder data visualization

  1. Quick Guide to Flash Catalyst

    CERN Document Server

    Elmansy, Rafiq

    2011-01-01

    How do you transform user interface designs created in Photoshop or Illustrator into interactive web pages? It's easier than you think. This guide shows you how to use Adobe Flash Catalyst to create interactive UIs and website wireframes for Rich Internet Applications-without writing a single line of code. Ideal for web designers, this book introduces Flash Catalyst basics with detailed step-by-step instructions and screenshots that illustrate every part of the process. You'll learn hands-on how to turn your static design or artwork into working user interfaces that can be implemented in Fla

  2. Flash Builder charting and multimedia

    CERN Document Server

    Rocchi, Cesare

    2010-01-01

    Charting and multimedia are two vital tools for data-driven applications. Learn about the main components of the chart library included in Flash Builder, and see how to build and customize widely used charts. Turning your attention to the multimedia capabilities of the Flex framework, you will review the multimedia components built into the Flex library, and learn how to use ActionScript to manipulate video and audio files. Charting and Multimedia is the third of five articles that will be compiled in the book, Data Visualization with Flash Builder: Designing RIA and AIR Applications with Rem

  3. Flash photolysis of cutinase

    DEFF Research Database (Denmark)

    Neves Petersen, Teresa; Klitgaard, Søren; Skovsen, Esben;

    2009-01-01

    enzyme, Fusarium solani pisi cutinase, a lipolytic enzyme. With this purpose, we acquired transient absorption data of cutinase, with supplemental experimental data on tryptophan (Trp) and lysozyme as reference molecules. We here report formation kinetics and lifetimes of transient chemical species...... created upon UV excitation of aromatic residues in proteins. Two proteins, lysozyme and cutinase, as well as the free amino acid Trp, were studied under acidic, neutral, and alkaline conditions. The shortest-lived species is assigned to solvated electrons (lifetimes of a few microseconds to nanoseconds......), whereas the longer-lived species are assigned to aromatic neutral and ionic radicals, Trp triplet states, and radical ionic disulphide bridges. The pH-dependent lifetimes of each species are reported. Solvated electrons ejected from the side chain of free Trp residues and aromatic residues in proteins...

  4. 3D Flash LIDAR Space Laser Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Advanced Scientific Concepts, Inc. (ASC) is a small business that has developed 3D Flash LIDAR systems for space and terrestrial applications. 3D Flash LIDAR is...

  5. MIMICRY, DIFFERENCE AND REPETITION

    Directory of Open Access Journals (Sweden)

    Marcelo Mendes de Souza

    2008-07-01

    Full Text Available This article addresses Homi K. Bhabha’s concept of mimicry in a broader context, other than that of cultural studies and post-colonial studies, bringing together other concepts, such as that of Gilles Deleuze in Difference and repetition, among other texts, and other names, such as Silviano Santiago, Jorge Luís Borges, Franz Kafka and Giorgio Agamben. As a partial conclusion, the article intends to oppose Bhabha’s freudian-marxist view to Five propositions on Psychoanalysis (1973, Gilles Deleuze’s text about Psychoanalysis published right after his book The Anti-Oedipus.

  6. Permeability transition pore-mediated mitochondrial superoxide flashes regulate cortical neural progenitor differentiation.

    Science.gov (United States)

    Hou, Yan; Mattson, Mark P; Cheng, Aiwu

    2013-01-01

    In the process of neurogenesis, neural progenitor cells (NPCs) cease dividing and differentiate into postmitotic neurons that grow dendrites and an axon, become excitable, and establish synapses with other neurons. Mitochondrial biogenesis and aerobic metabolism provide energy substrates required to support the differentiation, growth and synaptic activity of neurons. Mitochondria may also serve signaling functions and, in this regard, it was recently reported that mitochondria can generate rapid bursts of superoxide (superoxide flashes), the frequency of which changes in response to environmental conditions and signals including oxygen levels and Ca(2+) fluxes. Here we show that the frequency of mitochondrial superoxide flashes increases as embryonic cerebral cortical neurons differentiate from NPCs, and provide evidence that the superoxide flashes serve a signaling function that is critical for the differentiation process. The superoxide flashes are mediated by mitochondrial permeability transition pore (mPTP) opening, and pharmacological inhibition of the mPTP suppresses neuronal differentiation. Moreover, superoxide flashes and neuronal differentiation are inhibited by scavenging of mitochondrial superoxide. Conversely, manipulations that increase superoxide flash frequency accelerate neuronal differentiation. Our findings reveal a regulatory role for mitochondrial superoxide flashes, mediated by mPTP opening, in neuronal differentiation.

  7. Flash CS4: The Missing Manual

    CERN Document Server

    Grover, Chris

    2008-01-01

    Unlock the power of Flash and bring gorgeous animations to life onscreen. Flash CS4: The Missing Manual includes a complete primer on animation, a guided tour of the program's tools and capabilities, lots of new illustrations, and more details on working with video. Beginners will learn to use the software in no time, and experienced Flash designers will improve their skills.

  8. Evaluation of Flash Bainite in 4130 Steel

    Science.gov (United States)

    2011-07-01

    Technical Report ARWSB-TR-11011 Evaluation of Flash Bainite in 4130 Steel G. Vigilante M. Hespos S. Bartolucci...4. TITLE AND SUBTITLE Evaluation of Flash Bainite in 4130 Steel 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT...STATEMENT 13. SUPPLEMENTARY NOTES 14. ABSTRACT ARDEC independently evaluated a Flash Bainite process developed by Gary Cola, Jr., Sirius Protection

  9. Evaluation of Na+/K+ pump function following repetitive activity in mouse peripheral nerve

    DEFF Research Database (Denmark)

    Moldovan, Mihai; Krarup, Christian

    2006-01-01

    excitability measures simultaneously from the evoked plantar compound muscle action potential (CMAP) and sciatic compound nerve action potential (CNAP). Three minutes after repetitive supramaximal stimulation maximal CMAP and CNAP amplitudes recovered but the threshold was increased approximately 40% for motor...

  10. Jaan Toomik ajakirjas Flash Art

    Index Scriptorium Estoniae

    1999-01-01

    Kunstiajakirja "Flash Art" maikuu numbris Ando Keskküla artikkel, mis annab ülevaate J. Toomiku loomingust ja peatub pikemalt tema olulisematel töödel. 10. juunist J. Toomiku isiknäitus Londoni fotograafide galeriis. Eksponeeritud video "Uisutaja"

  11. Ingmar Muusikuse foto Flash Artis

    Index Scriptorium Estoniae

    1999-01-01

    Flash Arti 1999. a. oktoobrinumbris virtuaalse näituse rubriigis Ando Keskküla artikkel radikaalsemast eesti kunstist ja kunstielust postsotsialistlikul ajastul. Illustratsiooniks Liina Siibi fotokompositsioonid, Ingmar Muusikuse foto Raoul Kurvitza, Ene-Liis Semperi ja Kiwa Eesti Panga performance'ist

  12. Ingmar Muusikuse foto Flash Artis

    Index Scriptorium Estoniae

    1999-01-01

    Flash Arti 1999. a. oktoobrinumbris virtuaalse näituse rubriigis Ando Keskküla artikkel radikaalsemast eesti kunstist ja kunstielust postsotsialistlikul ajastul. Illustratsiooniks Liina Siibi fotokompositsioonid, Ingmar Muusikuse foto Raoul Kurvitza, Ene-Liis Semperi ja Kiwa Eesti Panga performance'ist

  13. Jaan Toomik ajakirjas Flash Art

    Index Scriptorium Estoniae

    1999-01-01

    Kunstiajakirja "Flash Art" maikuu numbris Ando Keskküla artikkel, mis annab ülevaate J. Toomiku loomingust ja peatub pikemalt tema olulisematel töödel. 10. juunist J. Toomiku isiknäitus Londoni fotograafide galeriis. Eksponeeritud video "Uisutaja"

  14. Coupling coefficient for TEA CO2 laser propulsion with variable pulse repetition rate

    Institute of Scientific and Technical Information of China (English)

    Yijun Zheng; Rongqing Tan; Donglei Wang; Guang Zheng; Changjun Ke; Kuohai Zhang; Chongyi Wan; Jin Wu

    2006-01-01

    @@ Because pulse repetition rate affected directly the momentum coupling coefficient of transversely excited atmospheric (TEA) CO2 laser propulsion, a double pulse trigger, controlling high voltage switch of laser excitation circuit, was designed. The pulse interval ranged between 5 and 100 ms. The momentum coupling coefficient for air-breathing mode laser propulsion was studied experimentally. It was found that the momentum coupling coefficient decreased with the pulse repetition rate increasing.

  15. Observers can reliably identify illusory flashes in the illusory flash paradigm.

    Science.gov (United States)

    van Erp, Jan B F; Philippi, Tom G; Werkhoven, Peter

    2013-04-01

    In the illusory flash paradigm, a single flash may be experienced as two flashes when accompanied by two beeps or taps, and two flashes may be experienced as a single flash when accompanied by one beep or tap. The classic paradigm restricts responses to '1' and '2' (2-AFC), ignoring possible qualitative differences between real and illusory flashes and implicitly assuming that illusory flashes are indistinguishable from real flashes. We added a third response category 'different from that of either 1 or 2 flashes' (3-AFC). Eight naïve and 6 experienced observers responded to 160 real and 160 illusory flash trials. Experienced observers were exposed to 1,200 trials before the experiment but without receiving feedback on their performance. The third response category was used for only 4 % of the real flash trials and for 44 % of the illusory flash trials. Experienced observers did so more often (78 %) than naïve observers (18 %). This shows that observers can reliably identify illusory flashes and indicates that mere exposure to illusory flash trials (without feedback) is enough to detect and classify potential qualitative differences between real and illusory flashes.

  16. On multiphase negative flash for ideal solutions

    DEFF Research Database (Denmark)

    Yan, Wei; Stenby, Erling Halfdan

    2012-01-01

    coefficients. It is shown that this inner loop, named here as multiphase negative flash for ideal solutions, can be solved either by Michelsen's algorithm for multiphase normal flash, or by its variation which uses F−1 phase amounts as independent variables. In either case, the resulting algorithm is actually...... simpler than the corresponding normal flash algorithm. Unlike normal flash, multiphase negative flash for ideal solutions can diverge if the feasible domain for phase amounts is not closed. This can be judged readily during the iteration process. The algorithm can also be extended to the partial negative...

  17. Foundation Flash CS4 for Designers

    CERN Document Server

    Green, Tom

    2008-01-01

    In this book, you'll learn:* How to create effective animations using the new Motion Editor and animation tools * How to use the new 3D features to animate objects in 3D space * Best-practice tips and techniques from some of the top Flash practitioners on the planet * How to create captioned video and full-screen video, and deploy HD video using Flash * Techniques for using the Flash UI components as well as XML documents to create stunning,interactive presentations If you're a Flash designer looking for a solid overview of Flash CS4, this book is for you. Through the use of solid and practica

  18. uFlip: Understanding Flash IO Patterns

    DEFF Research Database (Denmark)

    Bouganim, Luc; Jonsson, Bjørn; Bonnet, Philippe

    2009-01-01

    want to establish what kind of IOs should be favored (or avoided) when designing algorithms and architectures for flash-based systems. In this paper, we focus on flash IO patterns, that capture relevant distribution of IOs in time and space, and our goal is to quantify their performance. We define u......FLIP, a benchmark for measuring the response time of flash IO patterns. We also present a benchmarking methodology which takes into account the particular characteristics of flash devices. Finally, we present the results obtained by measuring eleven flash devices, and derive a set of design hints that should drive...

  19. Repetition in Waiting for Godot

    Institute of Scientific and Technical Information of China (English)

    李想; 魏妍

    2015-01-01

    Waiting for Godot is one of the most famous plays written by Samuel Barclay Beckett, and also is the founding work of“Theatre of the Absurd”. In the drama, repetitive phenomena shed light on the whole construction considerably. All the charac-ters were helpless and unthinking. Their dialogues were simple, nonsense and repetitive. Two scenes were cyclical. Repetition was used subtly in order to express the theme of the play, showing mental crisis after depravation of WWII.

  20. From Sulfide Flash Smelting to a Novel Flash Ironmaking Technology

    Science.gov (United States)

    Sohn, Hong Yong

    A novel flash ironmaking technology is under development at the University of Utah under the support of U.S. Department of Energy (DOE) and American Iron and Steel Institute (AISI). The history of the development from the conception of the idea to the current status will be discussed. The flash ironmaking process produces iron directly from fine iron ore concentrates without requiring cokemaking and pelletization/sintering, which will enable the technology to significantly reduce energy consumption and carbon dioxide emissions compared with blast furnace ironmaking. Unlike other gas-based ironmaking processes, this technology will not suffer from the problems of solid sticking and fusion. Current work is focused on the method of supplying the energy required to maintain the necessary temperature, as an intermediate step to determine the scalability for larger, industrial-scale pilot trials.

  1. Mitochondrial Flash: Integrative Reactive Oxygen Species and pH Signals in Cell and Organelle Biology

    Science.gov (United States)

    Gong, Guohua; Wang, Xianhua; Wei-LaPierre, Lan; Cheng, Heping; Dirksen, Robert

    2016-01-01

    Abstract Significance: Recent breakthroughs in mitochondrial research have advanced, reshaped, and revolutionized our view of the role of mitochondria in health and disease. These discoveries include the development of novel tools to probe mitochondrial biology, the molecular identification of mitochondrial functional proteins, and the emergence of new concepts and mechanisms in mitochondrial function regulation. The discovery of “mitochondrial flash” activity has provided unique insights not only into real-time visualization of individual mitochondrial redox and pH dynamics in live cells but has also advanced understanding of the excitability, autonomy, and integration of mitochondrial function in vivo. Recent Advances: The mitochondrial flash is a transient and stochastic event confined within an individual mitochondrion and is observed in a wide range of organisms from plants to Caenorhabditis elegans to mammals. As flash events involve multiple transient concurrent changes within the mitochondrion (e.g., superoxide, pH, and membrane potential), a number of different mitochondrial targeted fluorescent indicators can detect flash activity. Accumulating evidence indicates that flash events reflect integrated snapshots of an intermittent mitochondrial process arising from mitochondrial respiration chain activity associated with the transient opening of the mitochondrial permeability transition pore. Critical Issues: We review the history of flash discovery, summarize current understanding of flash biology, highlight controversies regarding the relative roles of superoxide and pH signals during a flash event, and bring forth the integration of both signals in flash genesis. Future Directions: Investigations using flash as a biomarker and establishing its role in cell signaling pathway will move the field forward. Antioxid. Redox Signal. 25, 534–549. PMID:27245241

  2. Cryogenic exciter

    Science.gov (United States)

    Bray, James William [Niskayuna, NY; Garces, Luis Jose [Niskayuna, NY

    2012-03-13

    The disclosed technology is a cryogenic static exciter. The cryogenic static exciter is connected to a synchronous electric machine that has a field winding. The synchronous electric machine is cooled via a refrigerator or cryogen like liquid nitrogen. The static exciter is in communication with the field winding and is operating at ambient temperature. The static exciter receives cooling from a refrigerator or cryogen source, which may also service the synchronous machine, to selected areas of the static exciter and the cooling selectively reduces the operating temperature of the selected areas of the static exciter.

  3. Spurious dispersion effects at FLASH

    Energy Technology Data Exchange (ETDEWEB)

    Prat, Eduard

    2009-07-15

    The performance of the Free-Electron Laser (FEL) process imposes stringent demands on the transverse trajectory and size of the electron beam. Since transverse dispersion changes off-energy particle trajectories and increases the effective beam size, dispersion must be controlled. This thesis treats the concept of dispersion in linacs, and analyses the impact of dispersion on the electron beam and on the FEL process. It presents generation mechanisms for spurious dispersion, quantifying its importance for FLASH (Free-electron Laser in Hamburg) and the XFEL (European X-ray Free-Electron Laser). A method for measuring and correcting dispersion and its implementation in FLASH is described. Experiments of dispersion e ects on the transverse beam quality and on the FEL performance are presented. (orig.)

  4. Multi-stage flash degaser

    Science.gov (United States)

    Rapier, Pascal M.

    1982-01-01

    A multi-stage flash degaser (18) is incorporated in an energy conversion system (10) having a direct-contact, binary-fluid heat exchanger to remove essentially all of the noncondensable gases from geothermal brine ahead of the direct-contact binary-fluid heat exchanger (22) in order that the heat exchanger (22) and a turbine (48) and condenser (32) of the system (10) can operate at optimal efficiency.

  5. Understanding maximal repetitions in strings

    CERN Document Server

    Crochemore, Maxime

    2008-01-01

    The cornerstone of any algorithm computing all repetitions in a string of length n in O(n) time is the fact that the number of runs (or maximal repetitions) is O(n). We give a simple proof of this result. As a consequence of our approach, the stronger result concerning the linearity of the sum of exponents of all runs follows easily.

  6. Trajectory Codes for Flash Memory

    CERN Document Server

    Anxiao,; Langberg, Michael; Schwartz, Moshe; Bruck, Jehoshua

    2010-01-01

    Flash memory is well-known for its inherent asymmetry: the flash-cell charge levels are easy to increase but are hard to decrease. In a general rewriting model, the stored data changes its value with certain patterns. The patterns of data updates are determined by the data structure and the application, and are independent of the constraints imposed by the storage medium. Thus, an appropriate coding scheme is needed so that the data changes can be updated and stored efficiently under the storage-medium's constraints. In this paper, we define the general rewriting problem using a graph model. It extends many known rewriting models such as floating codes, WOM codes, buffer codes, etc. We present a new rewriting scheme for flash memories, called the trajectory code, for rewriting the stored data as many times as possible without block erasures. We prove that the trajectory code is asymptotically optimal in a wide range of scenarios. We also present randomized rewriting codes optimized for expected performance (g...

  7. FLASH2: Operation, beamlines, and photon diagnostics

    Energy Technology Data Exchange (ETDEWEB)

    Plönjes, Elke, E-mail: elke.ploenjes@desy.de; Faatz, Bart; Kuhlmann, Marion; Treusch, Rolf [Deutsches Elektronen-Synchrotron DESY, Notkestr. 85, 22607 Hamburg (Germany)

    2016-07-27

    FLASH2, a major extension of the soft X-ray free-electron laser FLASH at DESY, turns FLASH into a multi-user FEL facility. A new undulator line is located in a separate accelerator tunnel and driven additionally by the FLASH linear accelerator. First lasing of FLASH2 was achieved in August 2014 with simultaneous user operation at FLASH1. The new FLASH2 experimental hall offers space for up to six experimental end stations, some of which will be installed permanently. The wide wavelength range spans from 4-60 nm and 0.8 nm in the 5{sup th} harmonic and in the future deep into the water window in the fundamental. While this is of high interest to users, it is challenging from the beamline instrumentation point of view. Online diagnostics - which are mostly pulse resolved - for beam intensity, position, wavelength, wave front, and pulse length have been to a large extent developed at FLASH(1) and have now been optimized for FLASH2. Pump-probe facilities for XUV-XUV, XUV optical and XUV-THz experiments will complete the FLASH2 user facility.

  8. Perceptual Repetition Blindness Effects

    Science.gov (United States)

    Hochhaus, Larry; Johnston, James C.; Null, Cynthia H. (Technical Monitor)

    1994-01-01

    The phenomenon of repetition blindness (RB) may reveal a new limitation on human perceptual processing. Recently, however, researchers have attributed RB to post-perceptual processes such as memory retrieval and/or reporting biases. The standard rapid serial visual presentation (RSVP) paradigm used in most RB studies is, indeed, open to such objections. Here we investigate RB using a "single-frame" paradigm introduced by Johnston and Hale (1984) in which memory demands are minimal. Subjects made only a single judgement about whether one masked target word was the same or different than a post-target probe. Confidence ratings permitted use of signal detection methods to assess sensitivity and bias effects. In the critical condition for RB a precue of the post-target word was provided prior to the target stimulus (identity precue), so that the required judgement amounted to whether the target did or did not repeat the precue word. In control treatments, the precue was either an unrelated word or a dummy.

  9. Flash Sintering of Alumina-based Ceramics

    OpenAIRE

    Biesuz, Mattia

    2017-01-01

    Flash sintering is an electrical field-assisted consolidation technology and represents a very novel technique for producing ceramic materials, which allows to decrease sensibly both processing temperature and time. Starting from 2010, when flash sintering was discovered, different ceramic materials with a wide range of electrical properties have been successfully densified. Up to date, the research on flash sintering has been mainly focused on ionic and electronic conductors and on semicondu...

  10. Search Engine Optimization for Flash Best Practices for Using Flash on the Web

    CERN Document Server

    Perkins, Todd

    2009-01-01

    Search Engine Optimization for Flash dispels the myth that Flash-based websites won't show up in a web search by demonstrating exactly what you can do to make your site fully searchable -- no matter how much Flash it contains. You'll learn best practices for using HTML, CSS and JavaScript, as well as SWFObject, for building sites with Flash that will stand tall in search rankings.

  11. [Rehabilitation Using Repetitive Transcranial Magnetic Stimulation].

    Science.gov (United States)

    Takeuchi, Naoyuki; Izumi, Shin-Ichi

    2017-03-01

    Various novel stroke rehabilitative methods have been developed based on findings in basic science and clinical research. Recently, many reports have shown that repetitive transcranial magnetic stimulation (rTMS) improves function in stroke patients by altering the excitability of the human cortex. The interhemispheric competition model proposes that deficits in stroke patients are due to reduced output from the affected hemisphere and excessive interhemispheric inhibition from the unaffected hemisphere to the affected hemisphere. The interhemispheric competition model indicates that improvement in deficits can be achieved either by increasing the excitability of the affected hemisphere using excitatory rTMS or by decreasing the excitability of the unaffected hemisphere using inhibitory rTMS. Recovery after stroke is related to neural plasticity, which involves developing new neural connections, acquiring new functions, and compensating for impairments. Artificially modulating the neural network by rTMS may induce a more suitable environment for use-dependent plasticity and also may interfere with maladaptive neural activation, which weakens function and limits recovery. There is potential, therefore, for rTMS to be used as an adjuvant therapy for developed neurorehabilitation techniques in stroke patients.

  12. SI Engine with repetitive NS spark plug

    Science.gov (United States)

    Pancheshniy, Sergey; Nikipelov, Andrey; Anokhin, Eugeny; Starikovskiy, Andrey; Laplase Team; Mipt Team; Pu Team

    2013-09-01

    Now de-facto the only technology for fuel-air mixtures ignition in IC engines exists. It is a spark discharge of millisecond duration in a short discharge gap. The reason for such a small variety of methods of ignition initiation is very specific conditions of the engine operation. First, it is very high-pressure of fuel-air mixture - from 5-7 atmospheres in old-type engines and up to 40-50 atmospheres on the operating mode of HCCI. Second, it is a very wide range of variation of the oxidizer/fuel ratio in the mixture - from almost stoichiometric (0.8-0.9) at full load to very lean (φ = 0.3-0.5) mixtures at idle and/or economical cruising mode. Third, the high velocity of the gas in the combustion chamber (up to 30-50 m/s) resulting in a rapid compression of swirling inlet flow. The paper presents the results of tests of distributed spark ignition system powered by repetitive pulse nanosecond discharge. Dynamic pressure measurements show the increased pressure and frequency stability for nanosecond excitation in comparison with the standard spark plug. Excitation by single nanosecond high-voltage pulse and short train of pulses was examined. In all regimes the nanosecond pulsed excitation demonstrate a better performance.

  13. Adobe Flash Professional CS6 digital classroom

    CERN Document Server

    Team, AGI Creative

    2012-01-01

    Full-color book and video package teaches you Flash in a flash! If you want to design and maintain dynamic websites with Adobe Flash, this full-color book-and-video training package from expert instructors is the perfect place to start. Fifteen self-paced, step-by-step lessons are accompanied by video tutorials, and this powerful combination helps you master the basics, acquire essential skills, and learn what's new. Making all aspects of Flash less intimidating, this superb training tool covers topics such as using layers to build animation sequences, creating interactive web

  14. Flash CS5 The Missing Manual

    CERN Document Server

    Grover, Chris

    2010-01-01

    Once you know how to use Flash, you can create everything from simple animations to high-end desktop applications, but it's a complex tool that can be difficult to master on your own-unless you have this Missing Manual. This book will help you learn all you need to know about Flash CS5 to create animations that bring your ideas to life. Learn animation basics. Find everything you need to know to get started with FlashMaster the Flash tools. Learn the animation and effects toolset, with clear explanations and hands-on examplesUse 3D effects. Rotate and put objects in motion in three dimensions

  15. GeckoFTL: Scalable Flash Translation Techniques For Very Large Flash Devices

    DEFF Research Database (Denmark)

    Dayan, Niv; Bonnet, Philippe; Idreos, Stratos

    2016-01-01

    The volume of metadata needed by a flash translation layer (FTL) is proportional to the storage capacity of a flash device. Ideally, this metadata should reside in the device's integrated RAM to enable fast access. However, as flash devices scale to terabytes, the necessary volume of metadata...

  16. Foundation ActionScript 3.0 for Flash and Flex

    CERN Document Server

    Richardson, Darren

    2009-01-01

    In this book, you'll: *Learn the fundamentals of ActionScript 3.0 using both the Flash IDE and Flex *Use ActionScript 3.0's object-oriented features *Manipulate sound and video to produce exciting modern web applications *Work with XML as your data source ActionScript 3.0, the latest version of the Flash Platform's scripting language, offers many new and powerful features. ActionScript is now a full-fledged programming language, with complete object-oriented capabilities, improved event handling, sound and video support, drawing capabilities, support for regular expressions, and much more. Whe

  17. A semiconductor laser excitation circuit

    Energy Technology Data Exchange (ETDEWEB)

    Kaadzunari, O.; Masaty, K.

    1984-03-27

    A semiconductor laser excitation circuit is patented that is designed for operation in a pulsed mode with a high pulse repetition frequency. This circuit includes, in addition to a semiconductor laser, a high speed photodetector, a reference voltage source, a comparator, and a pulse oscillator and modulator. If the circuit is built using standard silicon integrated circuits, its speed amounts to several hundred megahertz, if it is constructed using gallium arsenide integrated circuits, its speed is several gigahertz.

  18. Exciter switch

    Science.gov (United States)

    Mcpeak, W. L.

    1975-01-01

    A new exciter switch assembly has been installed at the three DSN 64-m deep space stations. This assembly provides for switching Block III and Block IV exciters to either the high-power or 20-kW transmitters in either dual-carrier or single-carrier mode. In the dual-carrier mode, it provides for balancing the two drive signals from a single control panel located in the transmitter local control and remote control consoles. In addition to the improved switching capabilities, extensive monitoring of both the exciter switch assembly and Transmitter Subsystem is provided by the exciter switch monitor and display assemblies.

  19. Flash Expansion Threshold in Whirligig Swarms.

    Directory of Open Access Journals (Sweden)

    William L Romey

    Full Text Available In the selfish herd hypothesis, prey animals move toward each other to avoid the likelihood of being selected by a predator. However, many grouped animals move away from each other the moment before a predator attacks. Very little is known about this phenomenon, called flash expansion, such as whether it is triggered by one individual or a threshold and how information is transferred between group members. We performed a controlled experiment with whirligig beetles in which the ratio of sighted to unsighted individuals was systematically varied and emergent flash expansion was measured. Specifically, we examined: the percentage of individuals in a group that startled, the resulting group area, and the longevity of the flash expansion. We found that one or two sighted beetles in a group of 24 was not enough to cause a flash expansion after a predator stimulus, but four sighted beetles usually initiated a flash expansion. Also, the more beetles that were sighted the larger the resulting group area and the longer duration of the flash expansion. We conclude that flash expansion is best described as a threshold event whose adaptive value is to prevent energetically costly false alarms while quickly mobilizing an emergent predator avoidance response. This is one of the first controlled experiments of flash expansion, an important emergent property that has applications to understanding collective motion in swarms, schools, flocks, and human crowds. Also, our study is a convincing demonstration of social contagion, how the actions of one individual can pass through a group.

  20. On Coding Efficiency for Flash Memories

    CERN Document Server

    Ma, Xudong

    2012-01-01

    Recently, flash memories have become a competitive solution for mass storage. The flash memories have rather different properties compared with the rotary hard drives. That is, the writing of flash memories is constrained, and flash memories can endure only limited numbers of erases. Therefore, the design goals for the flash memory systems are quite different from these for other memory systems. In this paper, we consider the problem of coding efficiency. We define the "coding-efficiency" as the amount of information that one flash memory cell can be used to record per cost. Because each flash memory cell can endure a roughly fixed number of erases, the cost of data recording can be well-defined. We define "payload" as the amount of information that one flash memory cell can represent at a particular moment. By using information-theoretic arguments, we prove a coding theorem for achievable coding rates. We prove an upper and lower bound for coding efficiency. We show in this paper that there exists a fundamen...

  1. Heat wave flash droughts in decline

    Science.gov (United States)

    Mo, Kingtse C.; Lettenmaier, Dennis P.

    2015-04-01

    Flash drought is a term that was popularized during rapidly evolving droughts in the Central U.S. in 2012 that were associated with heat waves. We posit that there are two kinds of flash droughts, and we will focus on heat wave flash droughts, of which the 2012 events were typical. We find, based on an analysis of temperature observations and model-reconstructed soil moisture (SM) and evapotranspiration from 1916 to 2013, that heat wave flash droughts in the conterminous U.S. (CONUS) are most likely to occur over the Midwest and the Pacific Northwest during the growing season. We also find that the number of such events across the CONUS has been decreasing over the last century but rebounded after 2011. The long-term downward trends appear to be associated with generally increasing trends in SM resulting from increasing trends in precipitation over the areas where heat wave flash droughts are most likely to occur.

  2. Repetition in English Political Public Speaking

    Institute of Scientific and Technical Information of China (English)

    李红梅

    2010-01-01

    Repetition is frequently used in English political public speaking to make it easy to be remembered and powerful to move the feelings of the public. This paper is intended to analyze the functions of repetition and different levels of repetition to highlight the significance of repetition in English political public speaking and the ability of using it in practice.

  3. Electroacupuncture combined with flash cupping for treatment of peripheral facial paralysis--a report of 224 cases.

    Science.gov (United States)

    Tian, Jianqi

    2007-03-01

    To observe the therapeutic effects of electroacupuncture plus flash cupping for peripheral facial paralysis. The main points used were Jingming (BL 1), Yangbai (GB 14) and Sibai (ST 2) with the adjunct points selected according to the syndrome differentiation. The routine acupuncture, electroacupuncture and flash cupping were used to treat 224 cases of peripheral facial paralysis. The total effective rate was 96%. Acupuncture can regulate the flow of blood and qi and dredge the channels and collaterals; the pulse electrotherapy can enhance excitation of the muscular tissues; and the flash cupping can make the local tissues to be in a state of high oxygen supply, benefiting blood circulation. The synergistic action of electroacupuncture and flash cupping can raise the therapeutic effect.

  4. Electroacupuncture Combined with Flash Cupping for Treatment of Peripheral Facial Paralysis ——A Report of 224 Cases

    Institute of Scientific and Technical Information of China (English)

    Tian Jianqi; Duan Shumin

    2007-01-01

    Objective: To observe the therapeutic effects of electroacupuncture plus flash cupping for peripheral facial paralysis. Method: The main points used were Jingming (BL 1), Yangbai (GB 14) and Sibai (ST 2) with the adjunct points selected according to the syndrome differentiation. The routine acupuncture,electroacupuncture and flash cupping were used to treat 224 cases of peripheral facial paralysis. Result:The total effective rate was 96%. Conclusion: Acupuncture can regulate the flow of blood and qi and dredge the channels and collaterals; the pulse electrotherapy can enhance excitation of the muscular tissues;and the flash cupping can make the local tissues to be in a state of high oxygen supply, benefiting blood circulation. The synergistic action of electroacupuncture and flash cupping can raise the therapeutic effect.

  5. Statistical Evolution of the Lightning Flash

    Science.gov (United States)

    Zoghzoghy, F. G.; Cohen, M.; Said, R.; Inan, U. S.

    2012-12-01

    Natural lightning is one of the most fascinating and powerful electrical processes on Earth. To date, the physics behind this natural phenomenon are not fully understood, due primarily to the difficulty of obtaining measurements inside thunderstorms and to the wide range of timescales involved (from nanoseconds to seconds). Our aim is to use accurate lightning geo-location data from the National Lightning Detection Network (NLDN) to study statistical patterns in lightning, taking advantage of the fact that millions of lightning flashes occur around the globe every day. We present two sets of results, one involving the patterns of flashes in a storm, and a second involving the patterns of strokes in a flash. These patterns can provide a surrogate measure of the timescales and the spatial extents of the underlying physical processes. First, we study the timescales of charge buildup inside thunderstorms. We find that, following a lightning flash, the probability of another neighboring flash decreases and takes tens of seconds to recover. We find that this suppression effect is a function of flash type, stroke peak current, cloud-to-ground (CG) stroke multiplicity, and other lightning and geographical parameters. We find that the probabilities of subsequent flashes are more suppressed following oceanic lightning, or following flashes with higher peak currents and/or higher multiplicities (for CG flashes). Second, we use NLDN data to study the evolution of the strokes within a CG flash. A CG flash typically includes multiple return strokes, which can occur in the same channel or in multiple channels within a few kilometers. We cluster NLDN stroke data into flashes and produce the probability density function of subsequent strokes as a function of distance and time-delays relative to the previous stroke. Using this technique, we investigate processes which occur during the CG lightning flash with nanosecond to millisecond timescales. For instance, our results suggest

  6. Terrestrial gamma-ray flashes

    Energy Technology Data Exchange (ETDEWEB)

    Marisaldi, Martino, E-mail: marisaldi@iasfbo.inaf.it [INAF-IASF Bologna, Via Gobetti 101, I-40129 Bologna (Italy); Fuschino, Fabio; Labanti, Claudio [INAF-IASF Bologna, Via Gobetti 101, I-40129 Bologna (Italy); Tavani, Marco [INAF-IASF Roma, Via Fosso del Cavaliere 100, I-00133 Roma (Italy); Argan, Andrea [INAF, Viale del Parco Mellini 84, 00136 Roma (Italy); Del Monte, Ettore [INAF-IASF Roma, Via Fosso del Cavaliere 100, I-00133 Roma (Italy); Longo, Francesco; Barbiellini, Guido [Dipartimento di Fisica Università di Trieste and INFN Trieste, via A. Valerio 2, I-34127 Trieste (Italy); Giuliani, Andrea [INAF-IASF Milano, Via Bassini 15, I-20133 Milano (Italy); Trois, Alessio [INAF Osservatorio Astronomico di Cagliari, loc. Poggio dei Pini, strada 54, I-09012 Capoterra (Italy); Bulgarelli, Andrea; Gianotti, Fulvio; Trifoglio, Massimo [INAF-IASF Bologna, Via Gobetti 101, I-40129 Bologna (Italy)

    2013-08-21

    Lightning and thunderstorm systems in general have been recently recognized as powerful particle accelerators, capable of producing electrons, positrons, gamma-rays and neutrons with energies as high as several tens of MeV. In fact, these natural systems turn out to be the highest energy and most efficient natural particle accelerators on Earth. Terrestrial Gamma-ray Flashes (TGFs) are millisecond long, very intense bursts of gamma-rays and are one of the most intriguing manifestation of these natural accelerators. Only three currently operative missions are capable of detecting TGFs from space: the RHESSI, Fermi and AGILE satellites. In this paper we review the characteristics of TGFs, including energy spectrum, timing structure, beam geometry and correlation with lightning, and the basic principles of the associated production models. Then we focus on the recent AGILE discoveries concerning the high energy extension of the TGF spectrum up to 100 MeV, which is difficult to reconcile with current theoretical models.

  7. [Nikola Tesla: flashes of inspiration].

    Science.gov (United States)

    Villarejo-Galende, Albero; Herrero-San Martín, Alejandro

    2013-01-16

    Nikola Tesla (1856-1943) was one of the greatest inventors in history and a key player in the revolution that led to the large-scale use of electricity. He also made important contributions to such diverse fields as x-rays, remote control, radio, the theory of consciousness or electromagnetism. In his honour, the international unit of magnetic induction was named after him. Yet, his fame is scarce in comparison with that of other inventors of the time, such as Edison, with whom he had several heated arguments. He was a rather odd, reserved person who lived for his inventions, the ideas for which came to him in moments of inspiration. In his autobiography he relates these flashes with a number of neuropsychiatric manifestations, which can be seen to include migraine auras, synaesthesiae, obsessions and compulsions.

  8. Radiometry of flashing LED sources

    Science.gov (United States)

    Gregory, Don A.; Medley, Stephanie; Roberts, Adam

    2008-08-01

    A laboratory based technique has been devised for measuring the illumination characteristics of flashing light emitting diode (LED) sources. The difference between the photopic measurement of a continuous source and a flashing source is that some analytic method must be incorporated into the measurement to account for the response of the eye. Ohno et al have devised an analytic expression for the impulse response of the eye, which closely matches existing forms used for finding effective intensity1. These other forms are the Blondel-Rey equation, the Form Factor method, and the Allard method.4,5,6 Ohno's research suggests a modified Allard method, but offers no procedure for actually making the measurement. In this research, the modified Allard1 method approach has been updated using standard laboratory equipment such as a silicon detector in conjunction with a digital multi-meter and Labview® software to make this measurement. Labview® allows exact computation of the modified Allard method. However, an approximation scheme for the conversion from radiometric units to photopic units must be adopted. The LED spectral form is approximately a Gaussian line shape with full width at half maximum of about 15 to 30nm. The Gaussian curve makes converting from radiometric to photopic units difficult. To simplify, the technique presented here estimates the spectral form of the LEDs to be a Dirac delta function situated at the peak wavelength. This allows the conversion from watts to lumens to be a simple application of the luminous efficiency curve.2 For LEDs with a full width half maximum of 20nm, this scheme is found to be accurate to +/- 5%.

  9. Varianish: Jamming with Pattern Repetition

    Directory of Open Access Journals (Sweden)

    Jort Band

    2014-10-01

    Full Text Available In music, patterns and pattern repetition are often regarded as a machine-like task, indeed often delegated to drum Machines and sequencers. Nevertheless, human players add subtle differences and variations to repeated patterns that are musically interesting and often unique. Especially when looking at minimal music, pattern repetitions create hypnotic effects and the human mind blends out the actual pattern to focus on variation and tiny differences over time. Varianish is a musical instrument that aims at turning this phenomenon into a new musical experience for musician and audience: Musical pattern repetitions are found in live music and Varianish generates additional (musical output accordingly that adds substantially to the overall musical expression. Apart from the theory behind the pattern finding and matching and the conceptual design, a demonstrator implementation of Varianish is presented and evaluated.

  10. Machine Learning Predictions of Flash Floods

    Science.gov (United States)

    Clark, R. A., III; Flamig, Z.; Gourley, J. J.; Hong, Y.

    2016-12-01

    This study concerns the development, assessment, and use of machine learning (ML) algorithms to automatically generate predictions of flash floods around the world from numerical weather prediction (NWP) output. Using an archive of NWP outputs from the Global Forecast System (GFS) model and a historical archive of reports of flash floods across the U.S. and Europe, we developed a set of ML models that output forecasts of the probability of a flash flood given a certain set of atmospheric conditions. Using these ML models, real-time global flash flood predictions from NWP data have been generated in research mode since February 2016. These ML models provide information about which atmospheric variables are most important in the flash flood prediction process. The raw ML predictions can be calibrated against historical events to generate reliable flash flood probabilities. The automatic system was tested in a research-to-operations testbed enviroment with National Weather Service forecasters. The ML models are quite successful at incorporating large amounts of information in a computationally-efficient manner and and result in reasonably skillful predictions. The system is largely successful at identifying flash floods resulting from synoptically-forced events, but struggles with isolated flash floods that arise as a result of weather systems largely unresolvable by the coarse resolution of a global NWP system. The results from this collection of studies suggest that automatic probabilistic predictions of flash floods are a plausible way forward in operational forecasting, but that future research could focus upon applying these methods to finer-scale NWP guidance, to NWP ensembles, and to forecast lead times beyond 24 hours.

  11. REPETITIVE CLUSTER-TILTED ALGEBRAS

    Institute of Scientific and Technical Information of China (English)

    Zhang Shunhua; Zhang Yuehui

    2012-01-01

    Let H be a finite-dimensional hereditary algebra over an algebraically closed field k and CFm be the repetitive cluster category of H with m ≥ 1.We investigate the properties of cluster tilting objects in CFm and the structure of repetitive clustertilted algebras.Moreover,we generalize Theorem 4.2 in [12](Buan A,Marsh R,Reiten I.Cluster-tilted algebra,Trans.Amer.Math.Soc.,359(1)(2007),323-332.) to the situation of CFm,and prove that the tilting graph KCFm of CFm is connected.

  12. Excited states

    CERN Document Server

    Lim, Edward C

    1974-01-01

    Excited States, Volume I reviews radiationless transitions, phosphorescence microwave double resonance through optical spectra in molecular solids, dipole moments in excited states, luminescence of polar molecules, and the problem of interstate interaction in aromatic carbonyl compounds. The book discusses the molecular electronic radiationless transitions; the double resonance techniques and the relaxation mechanisms involving the lowest triplet state of aromatic compounds; as well as the optical spectra and relaxation in molecular solids. The text also describes dipole moments and polarizab

  13. Flash memory in embedded Java programs

    DEFF Research Database (Denmark)

    Korsholm, Stephan Erbs

    2011-01-01

    This paper introduces a Java execution environment with the capability for storing constant heap data in Flash, thus saving valuable RAM. The extension is motivated by the structure of three industrial applications which demonstrate the need for storing constant data in Flash on small embedded...... devices. The paper introduces the concept of host initialization of constant data to prepare a Flash image of constant data that can be kept outside the heap during runtime. The concept is implemented in an interpreter based Java execution environment....

  14. Repetitive elements in parasitic protozoa

    Directory of Open Access Journals (Sweden)

    Clayton Christine

    2010-05-01

    Full Text Available Abstract A recent paper published in BMC Genomics suggests that retrotransposition may be active in the human gut parasite Entamoeba histolytica. This adds to our knowledge of the various types of repetitive elements in parasitic protists and the potential influence of such elements on pathogenicity. See research article http://www.biomedcentral.com/1471-2164/11/321

  15. The flash-lag effect and the flash-drag effect in the same display.

    Science.gov (United States)

    Murai, Yuki; Murakami, Ikuya

    2016-09-01

    Visual motion distorts the perceived position of a stimulus. In the flash-drag effect (FDE), the perceived position of a flash appears to be shifted in the direction of nearby motion. In the flash-lag effect (FLE), a flash adjacent to a moving stimulus appears to lag behind. The FLE has been explained by several models, including the differential latency hypothesis, that a moving stimulus has a shorter processing latency than a flash does. The FDE even occurs when the flash is presented earlier than the moving stimulus, and it has been discussed whether this temporal property can be explained by the differential latency model. In the present study, we simultaneously quantified the FDE and FLE using the random jump technique (Murakami, 2001b) and compared their temporal properties. While the positional offset between a randomly jumping stimulus and a flashed stimulus determined the FLE, a drifting grating appeared next to the flash at various stimulus-onset asynchronies to induce the FDE. The grating presented up to 200 ms after the flash onset induced the FDE, whose temporal tuning was explained by a simple convolution model incorporating stochastic fluctuations of differential latency estimated from the FLE data and a transient-sustained temporal profile of motion signals. Thus, a common temporal mechanism to compute the stimulus position in reference to surrounding stimuli governs both the FDE and the FLE.

  16. Flash Point: Evaluation, Experimentation and Estimation

    Science.gov (United States)

    Rowley, J. R.; Freeman, D. K.; Rowley, R. L.; Oscarson, J. L.; Giles, N. F.; Wilding, W. V.

    2010-05-01

    The flash point is an important indicator of the flammability of a chemical. For safety purposes, many data compilations report the lowest value and not the most likely. This practice, combined with improper documentation and poor data storage methods, has resulted in compilations filled with fire-hazard data that are inconsistent with related properties and between members of homologous chemical series. In this study, the flash points reported in the DIPPR® 801 database and more than 1,400 other literature values were critically reviewed based on measurement method, inter-property relations, and trends in chemical series. New measurements for seven compounds illustrate the differences between experimental flash points and data commonly found in fire-hazard compilations. With a critically reviewed set of experimental data, published predictive methods for the flash point were evaluated for accuracy.

  17. 3D Flash LIDAR Space Laser Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Advanced Scientific Concepts, Inc (ASC) is a small business, which has developed a compact, eye-safe 3D Flash LIDARTM Camera (FLC) well suited for real-time...

  18. Hot Flashes amd Night Sweats (PDQ)

    Science.gov (United States)

    ... Other Funding Find NCI funding for small business innovation, technology transfer, and contracts Training Cancer Training at ... remedies for hot flashes. These include dong quai , milk thistle , red clover , licorice root extract , and chaste ...

  19. Method for programming a flash memory

    Science.gov (United States)

    Brosky, Alexander R.; Locke, William N.; Maher, Conrado M.

    2016-08-23

    A method of programming a flash memory is described. The method includes partitioning a flash memory into a first group having a first level of write-protection, a second group having a second level of write-protection, and a third group having a third level of write-protection. The write-protection of the second and third groups is disabled using an installation adapter. The third group is programmed using a Software Installation Device.

  20. Hydrodynamic simulations of the core helium flash

    CERN Document Server

    Mocak, M; Weiss, A; Kifonidis, K; 10.1017/S1743921308022813

    2009-01-01

    We describe and discuss hydrodynamic simulations of the core helium flash using an initial model of a 1.25 M_sol star with a metallicity of 0.02 near at its peak. Past research concerned with the dynamics of the core helium flash is inconclusive. Its results range from a confirmation of the standard picture, where the star remains in hydrostatic equilibrium during the flash (Deupree 1996), to a disruption or a significant mass loss of the star (Edwards 1969; Cole & Deupree 1980). However, the most recent multidimensional hydrodynamic study (Dearborn 2006) suggests a quiescent behavior of the core helium flash and seems to rule out an explosive scenario. Here we present partial results of a new comprehensive study of the core helium flash, which seem to confirm this qualitative behavior and give a better insight into operation of the convection zone powered by helium burning during the flash. The hydrodynamic evolution is followed on a computational grid in spherical coordinates using our new version of th...

  1. The free-electron laser FLASH

    Institute of Scientific and Technical Information of China (English)

    Siegfried Schreiber; Bart Faatz

    2015-01-01

    FLASH at DESY, Hamburg, Germany is the first free-electron laser(FEL) operating in the extreme ultraviolet(EUV)and soft x-ray wavelength range. FLASH is a user facility providing femtosecond short pulses with an unprecedented peak and average brilliance, opening new scientific opportunities in many disciplines. The first call for user experiments has been launched in 2005. The FLASH linear accelerator is based on TESLA superconducting technology, providing several thousands of photon pulses per second to user experiments. Probing femtosecond-scale dynamics in atomic and molecular reactions using, for instance, a combination of x-ray and optical pulses in a pump and probe arrangement,as well as single-shot diffraction imaging of biological objects and molecules, are typical experiments performed at the facility. We give an overview of the FLASH facility, and describe the basic principles of the accelerator. Recently,FLASH has been extended by a second undulator beamline(FLASH2) operated in parallel to the first beamline, extending the capacity of the facility by a factor of two.

  2. Repetition suppression and repetition priming are processing outcomes.

    Science.gov (United States)

    Wig, Gagan S

    2012-01-01

    Abstract There is considerable evidence that repetition suppression (RS) is a cortical signature of previous exposure to the environment. In many instances RS in specific brain regions is accompanied by improvements in specific behavioral measures; both observations are outcomes of repeated processing. In understanding the mechanism by which brain changes give rise to behavioral changes, it is important to consider what aspect of the environment a given brain area or set of areas processes, and how this might be expressed behaviorally.

  3. Tunable cobalt nanoparticle synthesis by intense pulse flash annealing

    Directory of Open Access Journals (Sweden)

    Aaron Mosey

    2017-05-01

    Full Text Available Magnetically susceptible materials can serve as a basis for the directed assembly of nanoscale network devices which can be used to extract energy from phase change materials. So far, matrix production cost has been a prohibitive factor in the realization of real world applications. Here we report a cost-effective method to synthesize magnetic nanoparticles. Samples were fabricated by sputtering magnetic thin films on carbon nanotube substrates followed by xenon intense pulsed light flash annealing. The results indicate that spatially ordered magnetic spheres can be tuned by various parameters such as initial thin film thickness, xenon lamp exposure excitation energy, local surface geometries, and the presence of an external magnetic field during annealing.

  4. Tunable cobalt nanoparticle synthesis by intense pulse flash annealing

    Science.gov (United States)

    Mosey, Aaron; Gaire, Babu; Kim, Jeongwhan; Ryu, Jong Eun; Cheng, Ruihua

    2017-05-01

    Magnetically susceptible materials can serve as a basis for the directed assembly of nanoscale network devices which can be used to extract energy from phase change materials. So far, matrix production cost has been a prohibitive factor in the realization of real world applications. Here we report a cost-effective method to synthesize magnetic nanoparticles. Samples were fabricated by sputtering magnetic thin films on carbon nanotube substrates followed by xenon intense pulsed light flash annealing. The results indicate that spatially ordered magnetic spheres can be tuned by various parameters such as initial thin film thickness, xenon lamp exposure excitation energy, local surface geometries, and the presence of an external magnetic field during annealing.

  5. Cohesive Function of Lexical Repetition in Text

    Institute of Scientific and Technical Information of China (English)

    张莉; 卢沛沛

    2013-01-01

    Lexical repetition is the most direct form of lexical cohesion,which is the central device for making texts hang together. Although repetition is the most direct way to emphasize,it performs the cohesive effect more apparently.

  6. A framework for targeting alternative brain regions with repetitive transcranial magnetic stimulation in the treatment of depression

    NARCIS (Netherlands)

    Schutter, D.J.L.G.; Honk, E.J. van

    2005-01-01

    It has been argued that clinical depression is accompanied by reductions in cortical excitability of the left prefrontal cortex (PFC). In support of this, repetitive transcranial magnetic stimulation (rTMS), which is a method of enhancing cortical excitability, has shown antidepressant efficacy when

  7. FPGA Flash Memory High Speed Data Acquisition

    Science.gov (United States)

    Gonzalez, April

    2013-01-01

    The purpose of this research is to design and implement a VHDL ONFI Controller module for a Modular Instrumentation System. The goal of the Modular Instrumentation System will be to have a low power device that will store data and send the data at a low speed to a processor. The benefit of such a system will give an advantage over other purchased binary IP due to the capability of allowing NASA to re-use and modify the memory controller module. To accomplish the performance criteria of a low power system, an in house auxiliary board (Flash/ADC board), FPGA development kit, debug board, and modular instrumentation board will be jointly used for the data acquisition. The Flash/ADC board contains four, 1 MSPS, input channel signals and an Open NAND Flash memory module with an analog to digital converter. The ADC, data bits, and control line signals from the board are sent to an Microsemi/Actel FPGA development kit for VHDL programming of the flash memory WRITE, READ, READ STATUS, ERASE, and RESET operation waveforms using Libero software. The debug board will be used for verification of the analog input signal and be able to communicate via serial interface with the module instrumentation. The scope of the new controller module was to find and develop an ONFI controller with the debug board layout designed and completed for manufacture. Successful flash memory operation waveform test routines were completed, simulated, and tested to work on the FPGA board. Through connection of the Flash/ADC board with the FPGA, it was found that the device specifications were not being meet with Vdd reaching half of its voltage. Further testing showed that it was the manufactured Flash/ADC board that contained a misalignment with the ONFI memory module traces. The errors proved to be too great to fix in the time limit set for the project.

  8. Single Particle Difraction at FLASH

    Energy Technology Data Exchange (ETDEWEB)

    Bogan, M.; Boutet, S.; Starodub, Dmitri; Decorwin-Martin, Philippe; /SLAC; Chapman, H.; Bajt, S.; Schulz, J.; /DESY; Hajdu, Janos; Seibert, M.M.; Iwan, Bianca; Timneanu, Nicusor; /Uppsala U.; Marchesini, Stefano; /LBL, Berkeley; Barty, Anton; Benner, W.Henry; Frank, Matthias; Hau-Riege, Stefan P.; Woods, Bruce; /LLNL, Livermore; Rohner, Urs; /Tofwerk AG, Thun

    2010-06-11

    Single-pulse coherent diffraction patterns have been collected from randomly injected single particles with a soft X-ray free-electron laser (FEL). The intense focused FEL pulse gives a high-resolution low-noise coherent diffraction pattern of the object before that object turns into a plasma and explodes. A diffraction pattern of a single particle will only be recorded when the particle arrival into the FEL interaction region coincides with FEL pulse arrival and detector integration. The properties of the experimental apparatus coinciding with these three events set the data acquisition rate. For our single particle FLASH diffraction imaging experiments: (1) an aerodynamic lens stack prepared a particle beam that consisted of particles moving at 150-200 m/s positioned randomly in space and time, (2) the 10 fs long FEL pulses were delivered at a fixed rate, and (3) the detector was set to integrate and readout once every two seconds. The effect of these experimental parameters on the rate of data acquisition using randomly injected particles will be discussed. Overall, the ultrashort FEL pulses do not set the limit of the data acquisition, more important is the effective interaction time of the particle crossing the FEL focus, the pulse sequence structure and the detector readout rate. Example diffraction patterns of randomly injected ellipsoidal iron oxide nanoparticles in different orientations are presented. This is the first single particle diffraction data set of identical particles in different orientations collected on a shot-to-shot basis. This data set will be used to test algorithms for recovering 3D structure from single particle diffraction.

  9. Karst flash floods: an example from the Dinaric karst (Croatia

    Directory of Open Access Journals (Sweden)

    O. Bonacci

    2006-01-01

    Full Text Available Flash floods constitute one of the deadliest and costliest natural disasters worldwide. This paper explains the karst flash flood phenomenon, which represents a special kind of flash flood. As the majority of flash floods karst flash floods are caused by intensive short-term precipitation in an area whose surface rarely exceeds a few square kilometres. The characteristics of all flash floods are their short duration, small areal extent, high flood peaks and rapid flows, and heavy loss of life and property. Karst flash floods have specific characteristics due to special conditions for water circulation, which exist in karst terrains. During karst flash floods a sudden rise of groundwater levels occurs, which causes the appearance of numerous, unexpected, abundant and temporary karst springs. This paper presents in detail an example of a karst flash flood in the Marina bay (Dinaric karst region of Croatia, which occurred in December 2004.

  10. A Comparative Study of Reduced-Variables-Based Flash and Conventional Flash

    DEFF Research Database (Denmark)

    Yan, Wei; Stenby, Erling Halfdan; Michelsen, Michael Locht

    2013-01-01

    the advantages of the reduced-variables methods in their recent paper. A fair comparison between the reduced-variables-based flash and the conventional flash is not straightforward because it is difficult to formulate the former as unconstrained minimization problems, and the flash calculation time is also...... related to the implementation quality. With the recent formulations by Nichita and Graciaa (2011), it is possible to code the reduced-variables methods without extensive modifications of Michelsen's conventional flash algorithm. A minimization-based reduced-variables algorithm was coded and compared...... with the conventional minimization-based flash. A test with the use of the SPE 3 example (Kenyon and Behie 1987) showed that the best reduction in time was less than 20% for the extreme situation of 25 components and just one row/column with nonzero BIPs. A better performance can be achieved by a simpler implementation...

  11. General review of flashing jet studies.

    Science.gov (United States)

    Polanco, Geanette; Holdø, Arne Erik; Munday, George

    2010-01-15

    The major concern on the management of superheated liquids, in industrial environments, is the large potential hazards involved in cases of any accidental release. There is a possibility that a violent phase change could take place inside the fluid released generating a flashing jet. This violent phase change might produce catastrophic consequences, such as explosions, fires or toxic exposure, in the installations and in the surroundings. The knowledge and understanding of the mechanisms involved in those releases become an important issue in the prevention of these consequences and the minimization of their impact. This work presents a comprehensive review of information about flashing processes. The review begins with a description of the single phase jet followed by a description of the two-phase flashing jet. The concepts and implications of the thermodynamic and mechanical effects on the behaviour of the jets are considered at the beginning of the review. Following the review is devoted to the classification of the different study approaches used to understand flashing processes in the past, highlighting various critical parameters on the behaviour and the hazard consequences of flashing jets. The review also contains an extensive compilation of experimental, theoretical and numerical data relating to these phenomena, which includes information on the distinct characteristics of the jet, since type of jet, velocity distribution, expansion angle and mass phase change all require individual estimation.

  12. General review of flashing jet studies

    Energy Technology Data Exchange (ETDEWEB)

    Polanco, Geanette, E-mail: gpolanco@usb.ve [Simon Bolivar University, Caracas (Venezuela, Bolivarian Republic of); Holdo, Arne Erik, E-mail: Erik.Holdo@coventry.ac.uk [Narvik University College, Narvik (Norway); Munday, George, E-mail: G.Munday@isaaconsult.co.uk [Coventry University, Coventry (United Kingdom)

    2010-01-15

    The major concern on the management of superheated liquids, in industrial environments, is the large potential hazards involved in cases of any accidental release. There is a possibility that a violent phase change could take place inside the fluid released generating a flashing jet. This violent phase change might produce catastrophic consequences, such as explosions, fires or toxic exposure, in the installations and in the surroundings. The knowledge and understanding of the mechanisms involved in those releases become an important issue in the prevention of these consequences and the minimization of their impact. This work presents a comprehensive review of information about flashing processes. The review begins with a description of the single phase jet followed by a description of the two-phase flashing jet. The concepts and implications of the thermodynamic and mechanical effects on the behaviour of the jets are considered at the beginning of the review. Following the review is devoted to the classification of the different study approaches used to understand flashing processes in the past, highlighting various critical parameters on the behaviour and the hazard consequences of flashing jets. The review also contains an extensive compilation of experimental, theoretical and numerical data relating to these phenomena, which includes information on the distinct characteristics of the jet, since type of jet, velocity distribution, expansion angle and mass phase change all require individual estimation.

  13. Lightning flash multiplicity in eastern Mediterranean thunderstorms

    Science.gov (United States)

    Yair, Y.; Shalev, S.; Erlich, Z.; Agrachov, A.; Katz, E.; Saaroni, H.; Price, C.; Ziv, B.

    2014-02-01

    Cloud-to-ground lightning flashes usually consist of one or several strokes coming in very short temporal succession and close spatial proximity. A commonly used method for converting stroke data into flashes is using the National Lightning Detection Network (NLDN) thresholds of maximum temporal separation of 0.5 s and maximum lateral distance of 10 km radius between successive strokes. In the present study, we tested a location-based algorithm with several spatial and temporal ranges, and analyzed stroke data obtained by the Israel Lightning Location System (ILLS) during one year (1.8.2009-31.7.2010). We computed the multiplicity, the percentage of single stroke flashes and the geographical distribution of average multiplicity values for thunderstorms in the Eastern Mediterranean region. Results show that for the NLDN thresholds, the percentage of single stroke flashes in Israel was 37% and the average multiplicity was 1.7. We reanalyzed the data with a spatial range that equals twice the ILLS location error and shorter times. For the new thresholds of maximum distance of 2.5 km and maximum allowed temporal separation of 0.2 s we find that the mean multiplicity of negative CGs is lowered to 1.4 and find a percentage of 58% of single stroke flashes. A unique severe storm from 30 October 2009 is analyzed and compared with the annual average of 2009/2010, showing that large deviations from the mean values can occur in specific events.

  14. Excited baryons

    Energy Technology Data Exchange (ETDEWEB)

    Mukhopadhyay, N.C.

    1986-01-01

    The status of the theory of the low-energy approach to hadron structure is reviewed briefly by surveying a few relevant models. A few examples of tests needed to sort out the predictions of different models pertaining to the quark-gluon structure of hadrons are discussed, and given the resulting physics objectives, a few experimental options for excited baryon research at CFBAF are suggested. (LEW)

  15. Reduced Comparator Flash ADC for ECG Applications

    Directory of Open Access Journals (Sweden)

    Saravanan. V. A

    2013-03-01

    Full Text Available A CMOS based low power 4-bit Flash Analog to Digital Converter (ADC design with reduced number of comparators than the conventional Flash Analog to Digital Converter and multiplexer based architecture is proposed. For improving the conversion rate, both the analog and digital parts of the ADC are fully modified and the architecture uses only 4 comparators instead of 15 as used in conventional flash ADC, thus saving considerable amount of power. The proposed 4-bit ADC is designed and simulated in TANNER tools with 1.2 V supply voltage using TSpice simulation. The proposed design consumes low power of 2.15mW and operates at a faster rate hence it is suitable for ECG applications.

  16. Mental models of flash floods and landslides.

    Science.gov (United States)

    Wagner, Klaus

    2007-06-01

    Perceptions of flash floods and landslides were analyzed in four communities of the Bavarian Alps using the mental model approach. Thirty-eight qualitative interviews, two telephone surveys with 600 respondents, and two onsite interviews (74/95 respondents) were conducted. Mental models concerning flash floods are much better developed than those for landslides because the key physical processes for flash floods are easier for the general public to recognize and understand. Mental models are influenced by the local conditions. People who have a better knowledge about the hazards are those who use many different sources to inform themselves, express fear about natural hazards, or have previous experience with hazards. Conclusions for how to improve information for the general public are discussed.

  17. Reductions in CI amplitude after repetitive transcranial magnetic stimulation (rTMS) over the striate cortex

    NARCIS (Netherlands)

    Schutter, D.J.L.G.; Honk, E.J. van

    2003-01-01

    Slow repetitive transcranial magnetic stimulation (rTMS) is a method capable of transiently inhibiting cortical excitability and disrupting information processing in the visual system. This method can be used to topographically map the functional contribution of different cortical brain areas in vis

  18. Circuit considerations for repetitive railguns

    Energy Technology Data Exchange (ETDEWEB)

    Honih, E.M.

    1986-01-01

    Railgun electromagnetic launchers have significant military and scientific potential. They provide direct conversion of electrical energy to projectile kinetic energy, and they offer the hope of achieving projectile velocities greatly exceeding the limits of conventional guns. With over 10 km/sec already demonstrated, railguns are attracting attention for tactical and strategic weapons systems and for scientific equation-of-state research. The full utilization of railguns will require significant improvements in every aspect of system design - projectile, barrel, and power source - to achieve operation on a large scale. This paper will review fundamental aspects of railguns, with emphasis on circuit considerations and repetitive operation.

  19. Garnet composite films with Au particles fabricated by repetitive formation for enhancement of Faraday effect

    Energy Technology Data Exchange (ETDEWEB)

    Uchida, H; Nakai, Y [Department of Electronics and Intelligent Systems, Tohoku Institute of Technology, 35-1 Yagiyama-Kasumi, Taihaku, Sendai, Miyagi 982-8577 (Japan); Mizutani, Y; Inoue, M [Department of Electrical and Electronic Information Engineering, Toyohashi University of Technology, Tempaku, Toyohashi, Aichi 441-8580 (Japan); Fedyanin, A A, E-mail: uchida_hn@tohtech.ac.jp [Faculty of Physics, Moscow State University, Moscow 119992 (Russian Federation)

    2011-02-16

    To prepare garnet (Bi : YIG) composite films with Au particles, we used a repetitive formation method to increase the number density of particles. On increasing the number of repetitions, the diameter distribution of the particles changed. After five repetitions using 5 nm Au films, the diameter distribution separated into two size groups. Shift of wavelength-excited localized surface plasmon resonance is discussed relative to the diameter distribution. In the composite films, enhancement of Faraday rotation associated with surface plasmons was observed. With six repetitions, a maximum enhanced rotation of -1.2{sup 0} was obtained, which is 20 times larger than that of a single Bi : YIG film. The figures of merit for the composite films are discussed. The thickness of a Bi : YIG composite film working for enhanced Faraday rotation was examined using an ion milling method.

  20. DC high voltage to drive helium plasma jet comprised of repetitive streamer breakdowns

    CERN Document Server

    Wang, Xingxing

    2016-01-01

    This paper demonstrates and studies helium atmospheric pressure plasma jet comprised of series of repetitive streamer breakdowns, which is driven by a pure DC high voltage (auto-oscillations). Repetition frequency of the breakdowns is governed by the geometry of discharge electrodes/surroundings and gas flow rate. Each next streamer is initiated when the electric field on the anode tip recovers after the previous breakdown and reaches the breakdown threshold value of about 2.5 kV/cm. Repetition frequency of the streamer breakdowns excited using this principle can be simply tuned by reconfiguring the discharge electrode geometry. This custom-designed type of the helium plasma jet, which operates on the DC high voltage and is comprised of the series of the repetitive streamer breakdowns at frequency about 13 kHz, is demonstrated.

  1. Centrally active nonhormonal hot flash therapies.

    Science.gov (United States)

    Loprinzi, Charles L; Stearns, Vered; Barton, Debra

    2005-12-19

    Given the problems associated with hormonal therapy, and the prominent problem of hot flashes in menopausal women, there is a need for nonhormonal agents to alleviate hot flashes. Several compounds that appear to act on the central nervous system have been investigated. Potential mechanisms for their effects on hot flashes have been described. Bellergal (no longer available on the US market, where it was known as Bellergal-S), a combination preparation sedative that consists of low-dose phenobarbital, ergotamine tartrate, and levorotatory alkaloids of belladonna, is an old agent that was popular approximately 20 years ago; however, there is limited suggestion of efficacy for this agent. Clonidine, an older antihypertensive drug, is another centrally active agent that has been studied. Randomized trials have demonstrated that it clearly works for reducing hot flashes, but the magnitude of efficacy is somewhat limited. Toxicity from this agent limits its utility in the clinic. Methyldopa is another centrally active agent that has been studied but to a more limited degree. It appears to have minimal efficacy and too much toxicity to make it clinically useful. Anecdotal observations from a number of sources suggested that newer antidepressants can alleviate hot flashes. This led to pilot trials of venlafaxine and paroxetine, with results suggesting benefit from both drugs. Subsequently, randomized, placebo-controlled, double-blind clinical trials of venlafaxine, paroxetine, and fluoxetine were conducted. All 3 of these clinical trials demonstrated statistically significant reductions in hot flashes with these newer antidepressants compared with placebo. Pilot trials of citalopram and mirtazapine, 2 other newer antidepressants, have also suggested efficacy. Toxicity evaluations have suggested that these agents are, again, well tolerated by the majority of patients. A recent trial, however, was unable to demonstrate any benefit for fluoxetine or citalopram over a placebo

  2. Foundation Flash CS5 for Designers

    CERN Document Server

    Green, T

    2010-01-01

    Flash is one of the most engaging, innovative, and versatile technologies available - allowing the creation of anything from animated banners and simple cartoons to Rich Internet Applications, interactive videos, and dynamic user interfaces for web sites, kiosks, devices, or DVDs. The possibilities are endless, and now it just got better. Flash CS5 boasts a host of new features, including better support for mobile devices, a whole new animation engine enabling full manipulation of tweens and paths, custom easing, improved inverse kinematics, a revamped timeline, built-in 3D, and much more. Thi

  3. Cancer treatment: dealing with hot flashes and night sweats

    Science.gov (United States)

    ... this page: //medlineplus.gov/ency/patientinstructions/000826.htm Cancer treatment: dealing with hot flashes and night sweats To ... this page, please enable JavaScript. Certain types of cancer treatments can cause hot flashes and night sweats. Hot ...

  4. Flash3D EDL Sensor Technology Advancement Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Advanced Scientific Concepts Inc. (ASC) is a small business, which has developed a number of 3D flash LADAR systems. Flash Ladar sensors are 3D video systems that...

  5. 3D Flash LIDAR EDL Resolution Improvement Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Advanced Scientific Concepts, Inc. (ASC) is a small business that has developed 3D Flash LIDAR systems for space and terrestrial applications. 3D Flash LIDAR is...

  6. Sunset science. III. Visual adaptation and green flashes.

    Science.gov (United States)

    Young, A T

    2000-12-01

    Photographs of green flashes do not preclude a role for physiological effects in these phenomena. While green flashes are certainly not after-images, there is compelling evidence that adaptation in the visual system strongly affects the perceived color of most sunset green flashes. Furthermore, the retinal image of the setting Sun is usually bright enough to bleach most of the red-sensitive photopigment in a few seconds, making the yellow stage of a sunset flash appear green. Even in air so hazy that no green light reaches the eye, a yellow flash may occur and appear green. Many, but not all, visual observations of sunset green flashes are of this yellow flash. The yellow portion of sunset green flashes helps explain their reported durations, which exceed those expected for the appearance of green light alone.

  7. Mainostoimiston Flash-tuotantoprosessin kehittäminen

    OpenAIRE

    Heinonen, Toni

    2012-01-01

    Tämän opinnäytetyön tarkoituksena oli kehittää mainostoimiston Flash-tuotantoprosessia. Mainostoimiston Flash-tuotanto on pääosin display-mainonnan eli bannereiden sekä Flashmainoskampanjasivustojen luontia. Lisäksi tarkoituksena oli tutkia mahdollisuutta soveltaa ohjelmistokehityksessä toimiviksi havaittujen ketterien prosessimallien soveltamista mainostoimiston Flash-tuotantoprosessiin. Työ aloitettiin kuvaamalla mainostoimiston nykyinen Flash-tuotantoprosessi tarkoitukseen ...

  8. Ultrafast-Contactless Flash Sintering using Plasma Electrodes

    OpenAIRE

    Theo Saunders; Salvatore Grasso; Reece, Michael J.

    2016-01-01

    This paper presents a novel derivative of flash sintering, in which contactless flash sintering (CFS) is achieved using plasma electrodes. In this setup, electrical contact with the sample to be sintered is made by two arc plasma electrodes, one on either side, allowing current to pass through the sample. This opens up the possibility of continuous throughput flash sintering. Preheating, a usual precondition for flash sintering, is provided by the arc electrodes which heat the sample to 1400 ...

  9. Sexual excitement.

    Science.gov (United States)

    Stoller, R J

    1976-08-01

    Sexual excitement depends on a scenario the person to be aroused has been writing since childhood. The story is an adventure, an autobiography disguised as fiction, in which the hero/heroine hides crucial intrapsychic conflicts, mysteries, screen memories of actual traumatic events and the resolution of these elements into a happy ending, best celebrated by orgasm. The function of the fantasy is to take these painful experiences and convert them to pleasure-triumph. In order to sharpen excitement-the vibration between the fear of original traumas repeating and the hope of a pleasurable conclusion this time-one introduces into the story elements of risk (approximations of the trauma) meant to prevent boredom and safety factors (sub-limnal signals to the storyteller that the risk are not truly dangerous). Sexual fantasy can be studied by means of a person's daydreams (including those chosen in magazines, books, plays, television, movies, and outright pornography), masturbatory behavior, object choice, foreplay, techniques of intercourse, or postcoital behavior.

  10. Mathematical modeling of the flash converting process

    Energy Technology Data Exchange (ETDEWEB)

    Sohn, H.Y.; Perez-Tello, M.; Riihilahti, K.M. [Utah Univ., Salt Lake City, UT (United States)

    1996-12-31

    An axisymmetric mathematical model for the Kennecott-Outokumpu flash converting process for converting solid copper matte to copper is presented. The model is an adaptation of the comprehensive mathematical model formerly developed at the University of Utah for the flash smelting of copper concentrates. The model incorporates the transport of momentum, heat, mass, and reaction kinetics between gas and particles in a particle-laden turbulent gas jet. The standard k-{epsilon} model is used to describe gas-phase turbulence in an Eulerian framework. The particle-phase is treated from a Lagrangian viewpoint which is coupled to the gas-phase via the source terms in the Eulerian gas-phase governing equations. Matte particles were represented as Cu{sub 2}S yFeS, and assumed to undergo homogeneous oxidation to Cu{sub 2}O, Fe{sub 3}O{sub 4}, and SO{sub 2}. A reaction kinetics mechanism involving both external mass transfer of oxygen gas to the particle surface and diffusion of oxygen through the porous oxide layer is proposed to estimate the particle oxidation rate Predictions of the mathematical model were compared with the experimental data collected in a bench-scale flash converting facility. Good agreement between the model predictions and the measurements was obtained. The model was used to study the effect of different gas-injection configurations on the overall fluid dynamics in a commercial size flash converting shaft. (author)

  11. In Situ Flash Pyrolysis of Straw

    DEFF Research Database (Denmark)

    Bech, Niels

    In-Situ Flash Pyrolysis of Straw Ph.D. dissertation by Niels Bech Submitted: April 2007. Supervisors: Professor Kim Dam-Johansen, Associate Professor Peter Arendt Jensen Erfaringerne med forbrænding af halm opnået gennem et årti har vist, at en proces der kan koncentrere energien på marken, fjerne...

  12. High-fidelity flash lidar model development

    Science.gov (United States)

    Hines, Glenn D.; Pierrottet, Diego F.; Amzajerdian, Farzin

    2014-06-01

    NASA's Autonomous Landing and Hazard Avoidance Technologies (ALHAT) project is currently developing the critical technologies to safely and precisely navigate and land crew, cargo and robotic spacecraft vehicles on and around planetary bodies. One key element of this project is a high-fidelity Flash Lidar sensor that can generate three-dimensional (3-D) images of the planetary surface. These images are processed with hazard detection and avoidance and hazard relative navigation algorithms, and then are subsequently used by the Guidance, Navigation and Control subsystem to generate an optimal navigation solution. A complex, high-fidelity model of the Flash Lidar was developed in order to evaluate the performance of the sensor and its interaction with the interfacing ALHAT components on vehicles with different configurations and under different flight trajectories. The model contains a parameterized, general approach to Flash Lidar detection and reflects physical attributes such as range and electronic noise sources, and laser pulse temporal and spatial profiles. It also provides the realistic interaction of the laser pulse with terrain features that include varying albedo, boulders, craters slopes and shadows. This paper gives a description of the Flash Lidar model and presents results from the Lidar operating under different scenarios.

  13. Flash-Aware Page Replacement Algorithm

    Directory of Open Access Journals (Sweden)

    Guangxia Xu

    2014-01-01

    Full Text Available Due to the limited main memory resource of consumer electronics equipped with NAND flash memory as storage device, an efficient page replacement algorithm called FAPRA is proposed for NAND flash memory in the light of its inherent characteristics. FAPRA introduces an efficient victim page selection scheme taking into account the benefit-to-cost ratio for evicting each victim page candidate and the combined recency and frequency value, as well as the erase count of the block to which each page belongs. Since the dirty victim page often contains clean data that exist in both the main memory and the NAND flash memory based storage device, FAPRA only writes the dirty data within the victim page back to the NAND flash memory based storage device in order to reduce the redundant write operations. We conduct a series of trace-driven simulations and experimental results show that our proposed FAPRA algorithm outperforms the state-of-the-art algorithms in terms of page hit ratio, the number of write operations, runtime, and the degree of wear leveling.

  14. RELATIONSHIP BETWEEN FLASH POINTS OF SOME BINARY ...

    African Journals Online (AJOL)

    B. S. Chandravanshi

    and BS-150 in the formulation of engine oils, the recent mineral oils were chosen for study. On the other .... blend. Upon analysis of the data due to Figure 1 (b) it can be shown that the flash point of every. SN-150: .... complex compositions.

  15. Potential of the FLASH FEL technology for the construction of a kW-scale light source for the next generation lithography

    Energy Technology Data Exchange (ETDEWEB)

    Schneidmiller, E.A.; Vogel, V.F.; Weise, H.; Yurkov, M.V.

    2011-08-15

    The driving engine of the Free Electron Laser in Hamburg (FLASH) is an L-band superconducting accelerator. It is designed to operate in burst mode with 800 microsecond pulse duration at a repetition rate of 10 Hz. The maximum accelerated beam current during the macropulse is 9 mA. Our analysis shows that the FLASH technology has great potential since it is possible to construct a FLASH like free electron laser operating at the wavelength of 13.5 and 6.8 nanometer with an average power up to 2.6 kW. Such a source meets the physical requirements for the light source for the next generation lithography. (orig.)

  16. Digital repetitive control under varying frequency conditions

    OpenAIRE

    Ramos Fuentes, Germán Andrés

    2012-01-01

    The tracking/rejection of periodic signals constitutes a wide field of research in the control theory and applications area and Repetitive Control has proven to be an efficient way to face this topic; however, in some applications the period of the signal to be tracked/rejected changes in time or is uncertain, which causes and important performance degradation in the standard repetitive controller. This thesis presents some contributions to the open topic of repetitive control workin...

  17. Measurement limits in flash thermography

    Science.gov (United States)

    Shepard, Steven M.; Lhota, James R.; Ahmed, Tasdiq

    2009-05-01

    Although active thermography has traditionally been regarded as a qualitative NDT method, its potential for quantitative measurement of thermophysical properties including wall thickness, flaw size and depth, thermal diffusivity or effusivity has been the subject of numerous investigations. Enabled by improvements in IR camera technology and fast, abundant and inexpensive computing power for advanced signal processing, measurement results have been reported using a variety of excitation and signal processing schemes. Results are often presented as a correlation between thermography data and nominal properties or independent measurements by another "validated" method. However, given the diffusion mechanism that underlies thermography, and the quantization and sampling conditions implicit in using an IR camera as a temperature sensor, there are definite limits to what can be achieved in a thermography measurement. While many benefits can be achieved with improved instrumentation, efficient energy insertion or optimized signal processing, ultimately, the limits imposed by diffusion and instrumentation take precedence, and cannot be circumvented. In this paper, the effects of camera frame rate and sensitivity on measurement of the thickness of a slab are examined, using basic 1-dimensional diffusion approximations.

  18. Optical Emissions Associated with Terrestrial Gamma-ray Flashes

    Science.gov (United States)

    Xu, W.; Celestin, S. J.; Pasko, V. P.

    2013-12-01

    Terrestrial Gamma-ray Flashes (TGFs) are high-energy photon bursts originating from the Earth's atmosphere. After their discovery in 1994 by the Burst and Transient Source Experiment (BATSE) detector aboard the Compton Gamma-Ray Observatory [Fishman et al., Science, 264, 1313, 1994], this phenomenon has been further observed by the Reuven Ramaty High Energy Solar Spectroscopic Imager (RHESSI) [Smith et al., Science, 307, 1085, 2005], the Fermi Gamma-ray Space Telescope [Briggs et al., JGR, 115, A07323, 2010] and the Astrorivelatore Gamma a Immagini Leggero (AGILE) satellite [Marisaldi et al., JGR, 115, A00E13, 2010]. Measurements have correlated TGFs with initial development stages of normal polarity intracloud lightning that transports negative charge upward (+IC) [e.g., Lu et al., GRL, 37, L11806, 2010; JGR, 116, A03316, 2011]. Moreover, Østgaard et al. [GRL, 40, 2423, 2013] have recently reported, for the first time, space-based observations of optical emissions from TGF-associated IC lightning flashes. The purpose of the present work is to quantify the intensities of optical emissions resulting from the excitation of air molecules produced by conventional streamer discharges in negative corona flashes of stepping negative leaders and by the large amount of electrons involved in TGF events based on two production mechanisms: relativistic runaway electron avalanches (RREAs) [Dwyer and Smith, GRL, 32, L22804, 2005] and production of runaway electrons by high-potential +IC lightning leaders [e.g., Celestin and Pasko, JGR, 116, A03315, 2011; Xu et al., GRL, 39, L08801, 2012]. We employ a Monte Carlo model to simulate the acceleration of electrons in the energy range from sub-eV to GeV in either large-scale homogeneous electric field sustaining RREAs or highly inhomogeneous electric field produced around the lightning leader tip region. With the knowledge of the electron energy distribution function, a model similar to that described in [Liu and Pasko, JGR, 109, A

  19. Effect of Airflows on Repetitive Nanosecond Volume Discharges

    Science.gov (United States)

    Tang, Jingfeng; Wei, Liqiu; Huo, Yuxin; Song, Jian; Yu, Daren; Zhang, Chaohai

    2016-03-01

    Atmospheric pressure discharges excited by repetitive nanosecond pulses have attracted significant attention for various applications. In this paper, a plate-plate discharge with airflows is excited by a repetitive nanosecond pulse generator. Under different experiment conditions, the applied voltages, discharge currents, and discharge images are recorded. The plasma images presented here indicate that the volume discharge modes vary with airflow speeds, and a diffuse and homogeneous volume discharge occurs at the speed of more than 35 m/s. The role of airflows provides different effects on the 2-stage pulse discharges. The 1st pulse currents nearly maintain consistency for different airflow speeds. However, the 2nd pulse current has a change trend of first decreasing and then rapidly increasing, and the value difference for 2nd pulse currents is about 20 A under different airflows. In addition, the experimental results are discussed according to the electrical parameters and discharge images. supported by National Natural Science Foundation of China (Nos. 51006027, 51437002, and 51477035)

  20. Direct and crossed effects of somatosensory stimulation on neuronal excitability and motor performance in humans

    NARCIS (Netherlands)

    Veldman, M. P.; Maffiuletti, N. A.; Hallett, M.; Zijdewind, I.; Hortobagyi, T.

    2014-01-01

    This analytic review reports how prolonged periods of somatosensory electric stimulation (SES) with repetitive transcutaneous nerve stimulation can have 'direct' and 'crossed' effects on brain activation, corticospinal excitability, and motor performance. A review of 26 studies involving 315 healthy

  1. Initial electric field changes of lightning flashes in two thunderstorms

    Science.gov (United States)

    Chapman, Ryan; Marshall, Thomas; Karunarathne, Sumedhe; Stolzenburg, Maribeth

    2017-04-01

    The beginning of all 75 lightning flashes in two small thunderstorms was investigated using an array of electric field change (E-change) meters and an array of VHF sensors with the goal of determining if an initial E-change (IEC) preceded the initial breakdown (IB) pulses in each flash. IECs were found at the beginning of all 62 flashes in Storm 1 and all 13 flashes in Storm 2. Hence, it is concluded that an IEC is a fundamental part of most or all lightning initiations and that an IEC is needed prior to the first IB pulse in a flash. IEC durations averaged 0.23 ms for cloud-to-ground (CG) flashes (range 0.08-0.54 ms) and averaged 2.7 ms for normal intracloud (IC) flashes (range 0.04-9.8 ms). IEC point dipole moments averaged 26 C m for CG flashes (range 4-86 C m) and averaged -140 C m for normal IC flashes (range -8 to -650 C m). IEC current moments averaged 120 kA m for CG flashes (range 41-410 kA m) and averaged -91 kA m for normal IC flashes (range -2 to -630 kA m). E-change data support the suggestion that weak narrow bipolar event type events initiate some lightning flashes, but 41 of the 75 flashes had no detectable initiating pulse > 0.04 V m-1 range normalized to 100 km. Two flashes had two IECs; the second IEC of each flash initiated a new lightning channel that propagated in a new direction and at a higher altitude than the original development after the first IEC.

  2. [Repetition and fear of dying].

    Science.gov (United States)

    Lerner, B D

    1995-03-01

    In this paper a revision is made of the qualifications of Repetition (R) in Freuds work, i.e. its being at the service of the Pleasure Principle and, beyond it, the binding of free energy due to trauma. Freud intends to explain with this last concept the "fort-da" and the traumatic dreams (obsessively reiterated self-reproaches may be added to them). The main thesis of this work is that R. is not only a defense against the recollection of the ominous past (as in the metaphorical deaths of abandonment and desertion) but also a way of maintaining life and identify fighting against the inescapable omninous future (known but yet experienced), i.e. our own death. Some forms of R. like habits, identificatory behaviors and sometimes even magic, are geared to serve the life instinct. A literary illustration shows this desperate fight.

  3. Pressure rig for repetitive casting

    Science.gov (United States)

    Vasquez, Peter (Inventor); Hutto, William R. (Inventor); Philips, Albert R. (Inventor)

    1989-01-01

    The invention is a pressure rig for repetitive casting of metal. The pressure rig performs like a piston for feeding molten metal into a mold. Pressure is applied to an expandable rubber diaphragm which expands like a balloon to force the metal into the mold. A ceramic cavity which holds molten metal is lined with blanket-type insulating material, necessitating only a relining for subsequent use and eliminating the lengthy cavity preparation inherent in previous rigs. In addition, the expandable rubber diaphragm is protected by the insulating material thereby decreasing its vulnerability to heat damage. As a result of the improved design the life expectancy of the pressure rig contemplated by the present invention is more than doubled. Moreover, the improved heat protection has allowed the casting of brass and other alloys with higher melting temperatures than possible in the conventional pressure rigs.

  4. Spectroscopic Investigation of a Repetitively-Pulsed Nanosecond Discharge

    Science.gov (United States)

    Yee, Benjamin T.

    This work reports on an investigation of a repetitively-pulsed nanosecond discharge (RPND) in helium over a range of 0.3-16.0 Torr. The discharge was studied experimentally via laser-absorption spectroscopy and opticals emission spectroscopy measurements. In concert with the experimental campaign, a global model of a helium plasma was developed with the aid of particle-in-cell simulations. The global model was then used to predict the population kinetics and emissions of the RPND. Synthesis of the results provided new data and insights on the development of the RPND. Among the results were direct measurements of the triplet metastable states during the excitation period. This period was found to be unexpectedly long at low pressures (less than or equal to 1.0 Torr), suggesting an excess in high-energy electrons as compared to an equilibrium distribution. Other phenomena such as a prominent return stroke and additional energy deposition by reflections in the transmission line were also identified. Estimates of the electric field and electron temperatures were obtained for several conditions. Furthermore, several optical methods for electron temperature measurement were evaluated for application to the discharge. Based on the global model simulations, the coronal model was found to apply to the line ratio of the 33S-23Po and 31S-2 1Po transitions, however further work is needed to ascertain its applicability to experimental discharges. These results provide new insight on the development of the repetitively-pulsed nanosecond discharge. Specifically, they reveal new information about the excited state dynamics within the discharge, the non-equilibrium nature of its electrons, and several avenues for future studies. This study extends the present understanding of repetitively-pulsed discharges, and advances the knowledge of energy coupling between electric fields and plasmas.

  5. Repetitive transcranial magnetic stimulation in psychiatry

    Directory of Open Access Journals (Sweden)

    Biswa Ranjan Mishra

    2011-01-01

    Full Text Available Repetitive transcranial magnetic stimulation (rTMS is a non-invasive and relatively painless tool that has been used to study various cognitive functions as well as to understand the brain-behavior relationship in normal individuals as well as in those with various neuropsychiatric disorders. It has also been used as a therapeutic tool in various neuropsychiatric disorders because of its ability to specifically modulate distinct brain areas. Studies have shown that repeated stimulation at low frequency produces long-lasting inhibition, which is called as long-term depression, whereas repeated high-frequency stimulation can produce excitation through long-term potentiation. This paper reviews the current status of rTMS as an investigative and therapeutic modality in various neuropsychiatric disorders. It has been used to study the cortical and subcortical functions, neural plasticity and brain mapping in normal individuals and in various neuropsychiatric disorders. rTMS has been most promising in the treatment of depression, with an overall milder adverse effect profile compared with electroconvulsive therapy. In other neuropsychiatric disorders such as schizophrenia, mania, epilepsy and substance abuse, it has been found to be useful, although further studies are required to establish therapeutic efficacy. It appears to be ineffective in the treatment of obsessive compulsive disorder. There is a paucity of studies of efficacy and safety of rTMS in pediatric and geriatric population. Although it appears safe, further research is required to optimize its efficacy and reduce the side-effects. Magnetic seizure therapy, which involves producing seizures akin to electroconvulsive therapy, appears to be of comparable efficacy in the treatment of depression with less cognitive adverse effects.

  6. Matter Flashed at Ultra Speed

    Science.gov (United States)

    2007-06-01

    "REM observations of GRB060418 and GRB060607A: the onset of the afterglow and the initial fireball Lorentz factor determination", by E. Molinari, S. D. Vergani, D. Malesani, S. Covino, et al. The paper is available at http://dx.doi.org/10.1051/0004-6361:20077388 (A&A, 469, L13-L16, 2007). The REM team is formed by G. Chincarini, E. Molinari, F.M. Zerbi, L.A. Antonelli, S. Covino, P. Conconi, L. Nicastro, E. Palazzi, M. Stefanon, V. Testa, G. Tosti, F. Vitali, A. Monfardini, F. D'Alessio, P. D'Avanzo, D. Fugazza, G. Malaspina, S. Piranomonte, S.D. Vergani, P.A. Ward, S. Campana, P. Goldoni, D. Guetta, D. Malesani, N. Masetti, E.J.A. Meurs, L. Norci, E. Pian, A. Fernandez-Soto, L. Stella, G. Tagliaferri, G. Ihle, L. Gonzalez, A. Pizarro, P. Sinclair, and J. Valenzuela. Notes Gamma-ray bursts (GRBs) are short flashes of energetic gamma-rays lasting from less than a second to several minutes. They release a tremendous quantity of energy in this short time making them the most powerful events since the Big Bang. They come in two different flavours, long and short ones. Over the past few years, international efforts have convincingly shown that long gamma-ray bursts are linked with the ultimate explosion of massive stars (hypernovae; see e.g. ESO PR 16/03) while the short ones most likely originate from the violent collision of neutron stars and/or black holes (see e.g. ESO PR 26/05 and 32/05). Irrespective of the original source of the GRB energy, the injection of so much energy into a confined volume will cause a fireball to form. Gamma-ray photons have nearly a million times more energy than the 'visual' photons the eye can see. Strictly speaking, the Lorentz factor is the ratio between the total and rest-mass energy of the fireball. REM (Rapid Eye Mount) is a small (60 cm mirror diameter) rapid reaction automatic telescope dedicated to monitor the prompt afterglow of Gamma Ray Burst events. It is located at the ESO La Silla Observatory in Chile. For more information, see

  7. Next High Performance and Low Power Flash Memory Package Structure

    Institute of Scientific and Technical Information of China (English)

    Jung-Hoon Lee

    2007-01-01

    In general, SAND flash memory has advantages in low power consumption, storage capacity, and fast erase/write performance in contrast to NOR flash. But, main drawback of the SAND flash memory is the slow access time for random read operations. Therefore, we proposed the new SAND flash memory package for overcoming this major drawback. We present a high performance and low power SAND flash memory system with a dual cache memory. The proposed SAND flash package consists of two parts, i.e., an SAND flash memory module, and a dual cache module. The new SAND flash memory system can achieve dramatically higher performance and lower power consumption compared with any conventional NAND-type flash memory module. Our results show that the proposed system can reduce about 78% of write operations into the flash memory cell and about 70% of read operations from the flash memory cell by using only additional 3KB cache space. This value represents high potential to achieve low power consumption and high performance gain.

  8. A robust fibre laser system for electro-optic electron bunch profile measurements at FLASH

    Energy Technology Data Exchange (ETDEWEB)

    Wissmann, Laurens-Georg

    2012-08-15

    For the electro-optic measurement of electron bunch profiles at FLASH a robust ytterbium doped fibre laser (YDFL) system has been developed consisting of a laser oscillator and a two-staged amplifier. The oscillator is designed to meet the specifications of high reliability and low noise operation. The amplifier makes use of tailored nonlinearity to enhance the spectral bandwidth of the output laser pulses. Active repetition rate control enables sub-picosecond synchronisation of the laser to the accelerator reference RF. Using a two-stage gating scheme the output pulse train repetition rate is adopted to the accelerator repetition rate. An experimental site used for electro-optic electron bunch diagnostics has been redesigned to support single-shot bunch profile measurements based on spectral decoding. An existing bunch profile monitor with a similar laser system was upgraded and electro-optic bunch profile measurements were conducted, allowing for a comparison with measurements done with other longitudinal electron bunch diagnostics and with former measurements.

  9. Comparing repetition-based melody segmentation models

    NARCIS (Netherlands)

    Rodríguez López, M.E.; de Haas, Bas; Volk, Anja

    2014-01-01

    This paper reports on a comparative study of computational melody segmentation models based on repetition detection. For the comparison we implemented five repetition-based segmentation models, and subsequently evaluated their capacity to automatically find melodic phrase boundaries in a corpus of 2

  10. Task Repetition and Second Language Speech Processing

    Science.gov (United States)

    Lambert, Craig; Kormos, Judit; Minn, Danny

    2017-01-01

    This study examines the relationship between the repetition of oral monologue tasks and immediate gains in L2 fluency. It considers the effect of aural-oral task repetition on speech rate, frequency of clause-final and midclause filled pauses, and overt self-repairs across different task types and proficiency levels and relates these findings to…

  11. Repetitions: A Cross-Cultural Study.

    Science.gov (United States)

    Murata, Kumiko

    1995-01-01

    This study investigated how repetition is used in conversation among native speakers of British English, native speakers of Japanese, and Japanese speakers of English. Five interactional functions of repetition (interruption-orientated, solidarity, silence-avoidance, hesitation, and reformulation) were identified, as well as the cultural factors…

  12. Digital repetitive control under varying frequency conditions

    CERN Document Server

    Ramos, Germán A; Olm, Josep M

    2013-01-01

    The tracking/rejection of periodic signals constitutes a wide field of research in the control theory and applications area. Repetitive Control has proven to be an efficient way to face this topic. However, in some applications the frequency of the reference/disturbance signal is time-varying or uncertain. This causes an important performance degradation in the standard Repetitive Control scheme. This book presents some solutions to apply Repetitive Control in varying frequency conditions without loosing steady-state performance. It also includes a complete theoretical development and experimental results in two representative systems. The presented solutions are organized in two complementary branches: varying sampling period Repetitive Control and High Order Repetitive Control. The first approach allows dealing with large range frequency variations while the second allows dealing with small range frequency variations. The book also presents applications of the described techniques to a Roto-magnet plant and...

  13. Using GHz Flash ADCs at STACEE

    Science.gov (United States)

    Zweerink, Jeffrey

    2002-04-01

    The Solar Tower Atmospheric Cherenkov Effect Experiment (STACEE) detects 50-500 GeV gamma rays by sampling the Cherenkov light wavefront generated as the gamma rays interact with the atmosphere. Using steerable heliostat mirrors and stationary secondary optics at the National Solar Thermal Test Facility in New Mexico, the Cherenkov light is recorded using fast electronics with good timing. One significant improvement of the full 64 channel STACEE detector over earlier prototypes is the addition of GHz flash ADCs on each channel. We are developing analysis techniques to extract timing and other pulse information from the flash ADCs in order to 1.) discriminate against the abundant cosmic ray background, and 2.) understand how well the shower direction and energy can be reconstructed. We describe the techniques and present results from data taken during the 2001-2002 observing season.

  14. Electrical Safety and Arc Flash Protections

    Energy Technology Data Exchange (ETDEWEB)

    R. Camp

    2008-03-04

    Over the past four years, the Electrical Safety Program at PPPL has evolved in addressing changing regulatory requirements and lessons learned from accident events, particularly in regards to arc flash hazards and implementing NFPA 70E requirements. This presentation will discuss PPPL's approaches to the areas of electrical hazards evaluation, both shock and arc flash; engineered solutions for hazards mitigation such as remote racking of medium voltage breakers, operational changes for hazards avoidance, targeted personnel training and hazard appropriate personal protective equipment. Practical solutions for nominal voltage identification and zero voltage checks for lockout/tagout will also be covered. Finally, we will review the value of a comprehensive electrical drawing program, employee attitudes expressed as a personal safety work ethic, integrated safety management, and sustained management support for continuous safety improvement.

  15. Direct flash steam geothermal power plant assessment

    Science.gov (United States)

    Alt, T. E.

    1982-01-01

    The objective was to analyze the capacity and availability factors of an operating direct flash geothermal power plant. System and component specifications, operating procedures, maintenance history, malfunctions, and outage rate are discussed. The plant studied was the 75 MW(e) geothermal power plant at Cerro Prieto, Mexico, for the years 1973 to 1979. To describe and assess the plant, the project staff reviewed documents, visited the plant, and met with staff of the operating utility. The high reliability and availability of the plant was documented and actions responsible for the good performance were identified and reported. The results are useful as guidance to US utilities considering use of hot water geothermal resources for power generation through a direct flash conversion cycle.

  16. How to give a science flash talk

    DEFF Research Database (Denmark)

    Veldhuis, Djuke

    2015-01-01

    Whether you are applying for funding, telling a family member about your research or engaging the public, your success will depend on how well you communicate. Persuading people that your research should be prioritised and funded relies on being a solid negotiator and developing political nous; b......; but these skills are also rooted in communication. One way to do this is by challenging yourself to summarise your research in a short, sharp, three-minute elevator pitch, or ‘flash talk’....

  17. Flash CS3 The Missing Manual

    CERN Document Server

    Grover, Chris

    2008-01-01

    Flash CS3, the latest version of the premier tool for creating web animations and interactive web sites, can be intimidating to learn. This entertaining reference tutorial provides a reader-friendly animation primer and a guided tour of all the program's tools and capabilities. Beginners will learn to use the software in no time, and experienced users will quickly take their skills to the next level.

  18. Mechanisms of Flash Sintering in Cubic Zirconia

    OpenAIRE

    Downs, John Axel

    2013-01-01

    The recently discovered flash sintering technique has shown that the application of a sufficiently large dc electric field (E-field) to a ceramic during sintering can cause sintering at temperatures several hundred degrees below conventional temperatures with sintering rates that allow for sintering in seconds rather than hours. This technique has already been demonstrated in wide range of ceramic materials including ionic conductors, electronic conductors, semi-conductors and insulators. Th...

  19. Advances in flash flood monitoring using UAVs

    Science.gov (United States)

    Perks, Matthew; Russell, Andrew; Large, Andrew

    2016-04-01

    UAVs have the potential to capture information about the earth's surface in dangerous and previously inaccessible locations. Through image acquisition of flash flood events and subsequent object-based analysis, highly dynamic and oft-immeasurable hydraulic phenomenon may be quantified at previously unattainable spatial and temporal resolutions. The potential for this approach to provide valuable information about the hydraulic conditions present during dynamic, high-energy flash floods has until now not been explored. In this paper we adopt a novel approach, utilising the Kande-Lucas-Tomasi (KLT) algorithm to track features present on the water surface which are related to the free-surface velocity. Following the successful tracking of features, a method analogous to the vector correction method has enabled accurate geometric rectification of velocity vectors. Uncertainties associated with the rectification process induced by unsteady camera movements are subsequently explored. Geo-registration errors are relatively stable and occur as a result of persistent residual distortion effects following image correction. The apparent ground movement of immobile control points between measurement intervals ranges from 0.05 - 0.13m. The application of this approach to assess the hydraulic conditions present in Alyth Burn, Scotland during a 1:200 year flash flood resulted in the generation of an average 4.2 measurements/m2 at a rate of 508 measurements/s. Analysis of these vectors provide a rare insight into the complexity of channel-overbank interactions during flash floods. The uncertainty attached to the calculated velocities is relatively low with a spatial average across the area of ± 0.15m/s. Little difference is observed in the uncertainty attached to out-of-bank velocities (± 0.15m/s), and within-channel velocities (± 0.16m/s), illustrating the consistency of the approach.

  20. Membuat Game Kuis Menggunakan Macromedia Flash 8

    OpenAIRE

    Lumban Gaol, Cindi N

    2016-01-01

    In the final project , the author makes an application quiz games . This application is a medium of learning that helps students to study for a quiz pep contained in this application relate to the lessons in school . Methods and design a quiz game designed by using software Macromedia Flash 8 as the programming language , script editor program , and is also used to design this application . This study was made aiming to broaden how to create a quiz game simple one. Word Keys : Mac...

  1. Magnesia-Chrome Refractories for Flash Furnace

    Institute of Scientific and Technical Information of China (English)

    LI Yong; CHEN Kaixian; LU Xinghua; LIU Jianlong; SUN Jialin; HONG Yanruo

    2002-01-01

    The rapid development of our country's heavy nonferrous metallurgical technology and the revolution in new type of heavynon-ferrous metallurgical furnace have imposed more critical demand on the refractory materials ,i. e. high quality and long service life. This paper presents the domestic status of the refractories for flash furnace , briefly describes the wear of the refractory used , and it is considered that the domestic in refractories for flashfurnace can be surely realized.

  2. Strategies for Using Repetition as a Powerful Teaching Tool

    Science.gov (United States)

    Saville, Kirt

    2011-01-01

    Brain research indicates that repetition is of vital importance in the learning process. Repetition is an especially useful tool in the area of music education. The success of repetition can be enhanced by accurate and timely feedback. From "simple repetition" to "repetition with the addition or subtraction of degrees of freedom," there are many…

  3. Strategies for Using Repetition as a Powerful Teaching Tool

    Science.gov (United States)

    Saville, Kirt

    2011-01-01

    Brain research indicates that repetition is of vital importance in the learning process. Repetition is an especially useful tool in the area of music education. The success of repetition can be enhanced by accurate and timely feedback. From "simple repetition" to "repetition with the addition or subtraction of degrees of freedom," there are many…

  4. A Comparative Study of Reduced Variables Based Flash and Conventional Flash

    DEFF Research Database (Denmark)

    Michelsen, Michael Locht; Yan, Wei; Stenby, Erling Halfdan

    Speeding up flash calculation is a central issue in compositional reservoir simulations since phase equilibrium calculation is the most time-consuming part in those simulations. The reduced variables methods, or the reduction methods, reformulate the original phase equilibrium problem with a smal......Speeding up flash calculation is a central issue in compositional reservoir simulations since phase equilibrium calculation is the most time-consuming part in those simulations. The reduced variables methods, or the reduction methods, reformulate the original phase equilibrium problem....... Most of the studies in the last decade suggest that the reduced variables methods are much more efficient than the conventional flash method. However, Haugen and Beckner questioned the advantages of the reduced variables methods in their recent paper (SPE 141399). A fair comparison between the reduced...... variables based flash and the conventional flash is not straightforward since the former is difficult to be formulated as unconstrained minimization and involves more complicated composition derivatives. With the recent formulations by Nichita and Graciaa (2010), it is possible to code the reduced variables...

  5. Repetition priming from moving faces.

    Science.gov (United States)

    Lander, Karen; Bruce, Vicki

    2004-06-01

    Recent experiments have suggested that seeing a familiar face move provides additional dynamic information to the viewer, useful in the recognition of identity. In four experiments, repetition priming was used to investigate whether dynamic information is intrinsic to the underlying face representations. The results suggest that a moving image primes more effectively than a static image, even when the same static image is shown in the prime and the test phases (Experiment 1). Furthermore, when moving images are presented in the test phase (Experiment 2), there is an advantage for moving prime images. The most priming advantage is found with naturally moving faces, rather than with those shown in slow motion (Experiment 3). Finally, showing the same moving sequence at prime and test produced more priming than that found when different moving sequences were shown (Experiment 4). The results suggest that dynamic information is intrinsic to the face representations and that there is an advantage to viewing the same moving sequence at prime and test.

  6. Extreme flash floods in Barcelona County

    Directory of Open Access Journals (Sweden)

    A. Barrera

    2005-01-01

    Full Text Available In this paper the catastrophic and extraordinary floods occurring in Barcelona County (Catalonia, NE Spain are studied, in order to characterise the temporal evolution of extreme flash floods in that area and their main features. These events usually cause economical losses and major problems for undertaking daily activity in Barcelona city. This kind of floods is a very common feature in the North-east of Spain and they are recorded every year in some point of Catalonia. This contribution also shows the frequency of those events, within the framework of all the floods that have occurred in Barcelona since the 14th century, but also describes the flooded area, urban evolution, impacts and the weather conditions for any of most severe events. The evolution of flood occurrence shows the existence of oscillations in the earlier and later modern age periods that can be attributed to climatic variability, evolution of the perception threshold and changes in vulnerability. A great increase of vulnerability can be assumed for the period 1850-1900. The analysis of the time evolution for the Barcelona rainfall series (1854-2000 shows that no trend exists, although, due to the changes in urban planning, flash-floods impact has changed over this time. The number of catastrophic flash floods has diminished, although the extraordinary ones have increased.

  7. Adobe Flash 11 Stage3D (Molehill) Game Programming Beginner's Guide

    CERN Document Server

    Kaitila, Christer

    2011-01-01

    Written in an informal and friendly manner, the style and approach of this book will take you on an exciting adventure. Piece by piece, detailed examples help you along the way by providing real-world game code required to make a complete 3D video game. Each chapter builds upon the experience and achievements earned in the last, culminating in the ultimate prize - your game! If you ever wanted to make your own 3D game in Flash, then this book is for you. This book is a perfect introduction to 3D game programming in Adobe Molehill for complete beginners. You do not need to know anything about S

  8. Flash-induced structural dynamics in photosystem II membrane fragments of green plants.

    Science.gov (United States)

    Pieper, Jörg; Renger, Gernot

    2009-07-07

    Time-resolved quasielastic neutron scattering with laser excitation is a promising novel pump-probe approach, which opens up new perspectives for the study of protein-membrane dynamics in specific functional states of even complex systems. This is demonstrated here for the case of photosystem II membrane fragments with inhibited electron transfer. In contrast to the case of the model system bacteriorhodopsin, a transient reduction of the dynamics is observed approximately 160 micros after the actinic laser flash. This effect is the first observation of a modulated structural dynamics in photosystem II membrane fragments.

  9. Precision markedly attenuates repetitive lift capacity.

    Science.gov (United States)

    Collier, Brooke R; Holland, Laura; McGhee, Deirdre; Sampson, John A; Bell, Alison; Stapley, Paul J; Groeller, Herbert

    2014-01-01

    This study investigated the effect of precision on time to task failure in a repetitive whole-body manual handling task. Twelve participants were required to repetitively lift a box weighing 65% of their single repetition maximum to shoulder height using either precise or unconstrained box placement. Muscle activity, forces exerted at the ground, 2D body kinematics, box acceleration and psychophysical measures of performance were recorded until task failure was reached. With precision, time to task failure for repetitive lifting was reduced by 72%, whereas the duration taken to complete a single lift and anterior deltoid muscle activation increased by 39% and 25%, respectively. Yet, no significant difference was observed in ratings of perceived exertion or heart rate at task failure. In conclusion, our results suggest that when accuracy is a characteristic of a repetitive manual handling task, physical work capacity will decline markedly. The capacity to lift repetitively to shoulder height was reduced by 72% when increased accuracy was required to place a box upon a shelf. Lifting strategy and muscle activity were also modified, confirming practitioners should take into consideration movement precision when evaluating the demands of repetitive manual handling tasks.

  10. Flash memories economic principles of performance, cost and reliability optimization

    CERN Document Server

    Richter, Detlev

    2014-01-01

    The subject of this book is to introduce a model-based quantitative performance indicator methodology applicable for performance, cost and reliability optimization of non-volatile memories. The complex example of flash memories is used to introduce and apply the methodology. It has been developed by the author based on an industrial 2-bit to 4-bit per cell flash development project. For the first time, design and cost aspects of 3D integration of flash memory are treated in this book. Cell, array, performance and reliability effects of flash memories are introduced and analyzed. Key performance parameters are derived to handle the flash complexity. A performance and array memory model is developed and a set of performance indicators characterizing architecture, cost and durability is defined.   Flash memories are selected to apply the Performance Indicator Methodology to quantify design and technology innovation. A graphical representation based on trend lines is introduced to support a requirement based pr...

  11. Modeling on Flash Flood Disaster Induced by Bed Load

    Institute of Scientific and Technical Information of China (English)

    CAO Shuyou; LIU Xingnian; HUANG Er; YANG Keiun

    2008-01-01

    Flash floods result from a complex interaction among hydro-meteorological, hydrologi-cal, and hydraulic processes across various spatial and temporal scales. Sichuan Province suffers flash floods frequently owing to mountain weather and topography. A flash flood and gravel bed load transport are two key relative problems in mountain river engineering. Bed materials are often encountered in alternate scouring and deposition in mountain fluvial processes during a flash flood.In this circumstance, CRS-1 bed load numerical model jointly with scale physical model is em-ployed to predict water level and gravel bed scour and deposition for design of flood control dykes and flash flood disaster mitigation. A case study on the mechanism of a flash flood disaster in-duced by bed load transport for a hydropower station in Sichuan Province is conducted. Finally,suggestions to protect the hydropower station are proposed.

  12. Onset conditions for flash sintering of UO2

    Science.gov (United States)

    Raftery, Alicia M.; Pereira da Silva, João Gustavo; Byler, Darrin D.; Andersson, David A.; Uberuaga, Blas P.; Stanek, Christopher R.; McClellan, Kenneth J.

    2017-09-01

    In this work, flash sintering was demonstrated on stoichiometric and non-stoichiometric uranium dioxide pellets at temperatures ranging from room temperature (26 °C) up to 600 °C . The onset conditions for flash sintering were determined for three stoichiometries (UO2.00, UO2.08, and UO2.16) and analyzed against an established thermal runaway model. The presence of excess oxygen was found to enhance the flash sintering onset behavior of uranium dioxide, lowering the field required to flash and shortening the time required for a flash to occur. The results from this study highlight the effect of stoichiometry on the flash sintering behavior of uranium dioxide and will serve as the foundation for future studies on this material.

  13. From funny current to HCN channels: 20 years of excitation.

    Science.gov (United States)

    Accili, E A; Proenza, C; Baruscotti, M; DiFrancesco, D

    2002-02-01

    The "funny" (pacemaker) current has unusual characteristics, including activation on hyperpolarization, permeability to K(+) and Na(+), modulation by internal cAMP, and a tiny, single-channel conductance. In cardiac cells and neurons, pacemaker channels control repetitive activity and excitability. The recent cloning of HCN subunits provides new insight into the molecular basis for the funny channel properties.

  14. Multi-channel analyzer controlled by applet and flash

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    Both java applet and flash were applied to emulate virtual panel of multi-channel pulse height analyzer (MCA), and Microsoft IE browser was used to control MCA through internet to measure the γ-ray energy spectrum of 137Cs. It Was shown that most of the work completed by applet can be done by flash too, and with flash, more beautiful panel of the remote controlled instruments can be easily designed.

  15. Multi—channel analyzer controlled by applet and flash

    Institute of Scientific and Technical Information of China (English)

    HUANGWen-Da

    2002-01-01

    Both java applet and flash were applied to emulate virtual panel of multi-channel pulse height analyzer(MCA),and Microsoft IE browser was used to control MCA through internet to measure the γ-ray energy spectrum of 137Cs.It was shown that most of the work completed by applet can be done by flash too,and with flash,more beautiful panel of the remote controlled instruments can be easily designed.

  16. The echo-enabled harmonic generation options for FLASH II

    CERN Document Server

    Deng, Haixiao; Faatz, Bart

    2011-01-01

    FLASH II is an upgrade to the existing free electron laser (FEL) FLASH. The echo-enabled harmonic generation (EEHG) scheme is proposed to be a potential seeding option of FLASH II. In this paper, the possibility of EEHG operation of FLASH II is investigated for the first time. With a combination of existing numerical codes, i.e. a laser-beam interaction code in an undulator (LBICU), a beam tracking code in a chicane (ELEGANT) and an universal FEL simulating code (GENESIS), the effects of beam energy chirp and coherent synchrotron radiation (CSR) on EEHG operation are studied as well. In addition, several interesting issues concerning EEHG simulation are discussed.

  17. Flash CS5.5 The Missing Manual

    CERN Document Server

    Grover, Chris

    2011-01-01

    You can build everything from simple animations to full-fledged iOS and Android apps with Flash CS5.5, but learning this complex program can be difficult-unless you have this fully updated, bestselling guide. Learn how to create gorgeous Flash effects even if you have no programming experience. With Flash CS5.5: The Missing Manual, you'll move from the basics to power-user tools with ease. Learn animation basics. Discover how to turn simple ideas into stunning animations.Master Flash's tools. Learn the animation and effects tools with clear explanations and hands-on examples.Use 3D effects. R

  18. Repetitive Bibliographical Information in Relational Databases.

    Science.gov (United States)

    Brooks, Terrence A.

    1988-01-01

    Proposes a solution to the problem of loading repetitive bibliographic information in a microcomputer-based relational database management system. The alternative design described is based on a representational redundancy design and normalization theory. (12 references) (Author/CLB)

  19. Computer-Related Repetitive Stress Injuries

    Science.gov (United States)

    ... on the shoulder Epicondylitis: elbow soreness often called "tennis elbow" Ganglion cyst: swelling or lump in the wrist ... Bones, Muscles, and Joints Carpal Tunnel Syndrome Medial Epicondylitis Repetitive Stress Injuries Contact Us Print Resources Send ...

  20. Digital repetitive control under varying frequency conditions

    OpenAIRE

    Ramos Fuentes, Germán Andrés

    2012-01-01

    Premi extraordinari doctorat curs 2011-2012, àmbit d’Enginyeria Industrial The tracking/rejection of periodic signals constitutes a wide field of research in the control theory and applications area and Repetitive Control has proven to be an efficient way to face this topic; however, in some applications the period of the signal to be tracked/rejected changes in time or is uncertain, which causes and important performance degradation in the standard repetitive controller. This the...

  1. Repetitive Bunches from RF-Photo Gun Radiate Coherently

    CERN Document Server

    Van der Geer, C A J; Van der Geer, S B

    2004-01-01

    We consider to feed the laser wake field accelerator of the alpha-X project by a train of low charge pancake electron bunches to reduce undesired expansion due to space-charge forces. To this purpose the photo excitation laser of the rf-injector is split into a train of sub-pulses, such that each of the produced electron bunches falls into a successive ponderomotive well of the plasma accelerator. This way the total accelerated charge is not reduced. The repetitive photo gun can be tested, at low energy, by connecting it directly to the undulator and monitoring the radiation. The assertions are based on the results of new GPT simulations.

  2. Animación con Flash

    OpenAIRE

    Agelet Ordobàs, Ferran; Villar Posada, Feliciano

    2009-01-01

    Flash es una aplicación informática producida por la empresa de software norteamericana Macromedia, que se utiliza principalmente para la generación de páginas web animadas e interactivas. Este programa se está convirtiendo en un estándar para la creación de contenidos animados y altamente interactivos para ser distribuidos en la Red. Este tutorial pretende recorrer el camino necesario para llegar a conocer las posibilidades de la aplicación sin experiencia previa. El usuario interesado tiene...

  3. 3D flash lidar imager onboard UAV

    Science.gov (United States)

    Zhou, Guoqing; Liu, Yilong; Yang, Jiazhi; Zhang, Rongting; Su, Chengjie; Shi, Yujun; Zhou, Xiang

    2014-11-01

    A new generation of flash LiDAR sensor called GLidar-I is presented in this paper. The GLidar-I has been being developed by Guilin University of Technology in cooperating with the Guilin Institute of Optical Communications. The GLidar-I consists of control and process system, transmitting system and receiving system. Each of components has been designed and implemented. The test, experiments and validation for each component have been conducted. The experimental results demonstrate that the researched and developed GLiDAR-I can effectively measure the distance about 13 m at the accuracy level about 11cm in lab.

  4. Influence of Pressure in Flash Sintering Technique

    Science.gov (United States)

    Pcheliakov, D. A.; Yurlova, M. S.; Grigoryev, E. G.; Olevsky, E. A.

    An innovative pressure-assisted flash-sintering technique has been developed to investigate the effect of pressure applied on microstructure and the sintering behavior of titanium dioxide. There are numerous applications for titanium dioxide in ceramics including microeletronics, glass ceramics, refractive materials, structural ceramics and titanium-containing ceramic materials and chemical intermediates. The traditional sintering of titanium dioxide usually requires several hours at over 1200 °C. The conducted research indicates that titanium dioxide can be sintered to full density in only a few seconds at 800-1000 °C, when subjected to a DC electrical field at a certain temperature moment.

  5. Flash ADC data processing with correlation coefficients

    Energy Technology Data Exchange (ETDEWEB)

    Blyth, D.; Gibson, M.; Mcfarland, D.; Comfort, J.R., E-mail: Joseph.Comfort@asu.edu

    2014-02-21

    The large growth of flash ADC techniques for processing signals, especially in applications of streaming data, raises issues such as data flow through an acquisition system, long-term storage, and greater complexity in data analysis. In addition, experiments that push the limits of sensitivity need to distinguish legitimate signals from noise. The use of correlation coefficients is examined to address these issues. They are found to be quite successful well into the noise region. The methods can also be extended to Field Programmable Gate Array modules for compressing the data flow and greatly enhancing the event rate capabilities.

  6. The role of molecular vibration in nanosecond repetitively pulsed discharges and in DBDs in hydrogen plasmas

    Science.gov (United States)

    Colonna, G.; D'Ammando, G.; Pietanza, L. D.

    2016-10-01

    A self-consistent state-to-state model of pure hydrogen has been used to investigate the development of nanosecond repetitively pulsed discharges and dielectric barrier discharges, the latter coupling the kinetic model with an equation for the circuit, thus mimicking an insulated electrode with an external capacitance. Vibrationally excited states play a fundamental role, affecting the degrees of dissociation and ionization, as well as internal and free-electron distributions.

  7. The attentional modulation of the flash-lag effect

    Directory of Open Access Journals (Sweden)

    M.V.C. Baldo

    2002-08-01

    Full Text Available If a dot is flashed in perfect alignment with a pair of dots rotating around the visual fixation point, most observers perceive the rotating dots as being ahead of the flashing dot (flash-lag effect. This perceptual effect has been interpreted to result from the perceptual extrapolation of the moving dots, the differential visual latencies between flashing and moving stimuli, as well as the modulation of attentional mechanisms. Here we attempted to uncouple the attentional effects brought about by the spatial predictability of the flashing dot from the sensory effects dependent on its visual eccentricity. The stimulus was a pair of dots rotating clockwise around the fixation point. Another dot was flashed at either the upper right or the lower left of the visual field according to three separate blocked situations: fixed, alternate and random positions. Twenty-four participants had to judge, in all three situations, the location of the rotating dots in relation to the imaginary line connecting the flashing dot and the fixation point at the moment the dot was flashed. The flash-lag effect was observed in all three situations, and a clear influence of the spatial predictability of the flashing dot on the magnitude of the perceptual phenomenon was revealed, independently of sensory effects related to the eccentricity of the stimulus in the visual field. These findings are consistent with our proposal that, in addition to sensory factors, the attentional set modulates the magnitude of the differential latencies that give rise to the flash-lag phenomenon.

  8. Slow frequency repetitive transcranial magnetic stimulation affects reaction times, but not priming effects, in a masked prime task

    NARCIS (Netherlands)

    Schlaghecken, F.; Munchau, A.; Bloem, B.R.; Rothwell, J.C.; Eimer, M.

    2003-01-01

    OBJECTIVE: Slow frequency repetitive transcranial magnetic stimulation (rTMS) reduces motor cortex excitability, but it is unclear whether this has behavioural consequences in healthy subjects. METHODS: We examined the effects of 1 Hz rTMS (train of 20 min; stimulus intensity 80% of active motor thr

  9. The perceived position of moving objects: transcranial magnetic stimulation of area MT+ reduces the flash-lag effect.

    Science.gov (United States)

    Maus, Gerrit W; Ward, Jamie; Nijhawan, Romi; Whitney, David

    2013-01-01

    How does the visual system assign the perceived position of a moving object? This question is surprisingly complex, since sluggish responses of photoreceptors and transmission delays along the visual pathway mean that visual cortex does not have immediate information about a moving object's position. In the flash-lag effect (FLE), a moving object is perceived ahead of an aligned flash. Psychophysical work on this illusion has inspired models for visual localization of moving objects. However, little is known about the underlying neural mechanisms. Here, we investigated the role of neural activity in areas MT+ and V1/V2 in localizing moving objects. Using short trains of repetitive Transcranial Magnetic Stimulation (TMS) or single pulses at different time points, we measured the influence of TMS on the perceived location of a moving object. We found that TMS delivered to MT+ significantly reduced the FLE; single pulse timings revealed a broad temporal tuning with maximum effect for TMS pulses, 200 ms after the flash. Stimulation of V1/V2 did not significantly influence perceived position. Our results demonstrate that area MT+ contributes to the perceptual localization of moving objects and is involved in the integration of position information over a long time window.

  10. Repetitive transcranial magnetic stimulation improves consciousness disturbance in stroke patients A quantitative electroencephalography spectral power analysis

    Institute of Scientific and Technical Information of China (English)

    Ying Xie; Tong Zhang

    2012-01-01

    Repetitive transcranial magnetic stimulation is a noninvasive treatment technique that can directly alter cortical excitability and improve cerebral functional activity in unconscious patients. To investigate the effects and the electrophysiological changes of repetitive transcranial magnetic stimulation cortical treatment, 10 stroke patients with non-severe brainstem lesions and with disturbance of consciousness were treated with repetitive transcranial magnetic stimulation. A quantitative electroencephalography spectral power analysis was also performed. The absolute power in the alpha band was increased immediately after the first repetitive transcranial magnetic stimulation treatment, and the energy was reduced in the delta band. The alpha band relative power values slightly decreased at 1 day post-treatment, then increased and reached a stable level at 2 weeks post-treatment. Glasgow Coma Score and JFK Coma Recovery Scale-Revised score were improved. Relative power value in the alpha band was positively related to Glasgow Coma Score and JFK Coma Recovery Scale-Revised score. These data suggest that repetitive transcranial magnetic stimulation is a noninvasive, safe, and effective treatment technology for improving brain functional activity and promoting awakening in unconscious stroke patients.

  11. Comparing communicative competence in child and chimp: the pragmatics of repetition.

    Science.gov (United States)

    Greenfield, P M; Savage-Rumbaugh, E S

    1993-02-01

    Through an analysis of chimpanzee-human discourse, we show that two Pan troglodytes chimpanzees and two Pan paniscus chimpanzees (bonobos) exposed to a humanly devised symbol system use partial or complete repetition of others' symbols, as children do: they do not produce rote imitations, but instead use repetition to fulfil a variety of pragmatic functions in discourse. These functions include agreement, request, promise, excitement, and selection from alternatives. In so doing, the chimpanzees demonstrate contingent turn-taking and the use of simple devices for lexical cohesion. In short, they demonstrate conversational competence. Because of the presence of this conversational competence in three sibling species, chimpanzees, bonobos, and humans, it is concluded that the potential to express pragmatic functions through repetition was part of the evolutionary history of human language, present in our common ancestor before the phylogenetic divergence of hominids and chimpanzees. In the context of these similarities, two interesting differences appeared: (I) Human children sometimes used repetition to stimulate more talk in their conversational partner; the chimpanzees, in contrast, use repetition exclusively to forward the non-verbal action. This difference may illuminate a unique feature of human linguistic communication, or it may simply reflect a modality difference (visual symbols used by the chimpanzees, speech used by the children) in the symbol systems considered in this research. A second difference seems likely to reflect a true species difference: utterance length. The one- and two-symbol repetitions used by the chimpanzees to fulfil a variety of pragmatic functions were less than half the maximum length found in either the visual symbol combinations addressed to them by their adult human caregivers or the oral repetitions of two-year-old children. This species difference probably reflects the evolution of increased brain size and consequent increased

  12. Flash Vacuum Pyrolysis - Techniques and Reactions.

    Science.gov (United States)

    Wentrup, Curt

    2017-07-04

    While pyrolysis reactions have been performed since ancient times and been crucial for the invention of several technologies, the methodology now commonly known as flash vacuum pyrolysis, FVP (or flash vacuum thermolysis, FVT) had its early beginnings in the 1940s and1950s, mainly through mass spectrometric detection of pyrolytically formed free radicals. In the 1960s many organic chemists started performing FVP experiments with the purpose of isolating new and interesting compounds and understanding pyrolysis processes. Meanwhile, many different types of apparatus and techniques have been developed, and it is the purpose of this review to present the most important methods as well as a survey of typical reactions and observations that can be achieved with the various techniques. This includes preparative FVP, chemical trapping reactions, matrix isolation and low temperature spectroscopy of reactive intermediates and unstable molecules, the use of online mass, photoelectron, microwave and millimeterwave spectroscopies, gas-phase laser pyrolysis, pulsed pyrolysis with supersonic jet expansion, very low pressure pyrolysis for kinetic investigations, solution-spray and falling-solid FVP for involatile compounds, and pyrolysis over solid supports and reagents. Moreover, the combination of FVP with matrix isolation and photochemistry is a powerful tool for investigations of reaction mechanism. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  13. Flash pyrolysis fuel oil: BIO-POK

    Energy Technology Data Exchange (ETDEWEB)

    Gust, S. [Neste Oy, Porvoo (Finland)

    1995-12-31

    Flash pyrolysis oil from Ensyn Tech., Canada and Union Fenosa, Spain was combusted with simple pressure atomisation equipment commonly used with light fuel oils in intermediate size (0.1-1 MW) boilers. With a number of modifications to the combustion system, carbon monoxide (CO) and nitrous oxide (NO{sub x}) could be reduced to acceptable levels: CO < 30 ppm and NO{sub x} < 140 ppm. Particulate emissions which were initially very high (Bacharach 4-5) were reduced (Bach. 2-3) by system changes but are still higher than from light fuel oil (Bach. <1). The modifications to the combustion system were: acid resistant progressive cavity pump, higher oil preheat temperature and higher oil pressure than for light fuel oils, refractory section between burner and boiler warmed up to at least 800 deg C. In addition, it was necessary to store pyrolysis oil samples under inert conditions to prevent oxidation and to rinse nozzles with alcohol after shutdown to prevent coking. The complexity and cost of these system modifications are considered to be too great for current grades of flash pyrolysis oil to be sold as a light fuel oil replacement. Improvements to fuel quality will be necessary. The main improvements are lowering of viscosity and improving of stability

  14. Honeywell optical investigations on FLASH program

    Science.gov (United States)

    O'Rourke, Ken; Peterson, Eric; Yount, Larry

    1995-05-01

    The increasing performance and reduction of life cycle cost requirements placed on commercial and military transport aircraft are resulting in more complex, highly integrated aircraft control and management systems. The use of fiber optic data transmission media can make significant contributions in achieving these performance and cost goals. The Honeywell portion of Task 2A on the Fly-by-Light Advanced System Hardware (FLASH) program is evaluating a Primary Flight Control System (PFCS) using pilot and copilot inputs from Active Hand Controllers (AHC) which are optically linked to the primary flight Control Computers (PFCC). Customer involvement is an important element of the Task 2A activity. Establishing customer requirements and perspectives on productization of systems developed under FLASH are key to future product success. The Honeywell elements of the PFCS demonstrator provide a command path that is optically interfaced from crew inputs to commands of distributed, smart actuation subsystems commands. Optical communication architectures are implemented using several protocols including the new AS-1773A 20 Mbps data bus standard. The interconnecting fiber optic cable plant is provided by our Task 1A teammate McDonnell Douglas Aerospace (West). Fiber optic cable plant fabrication uses processed, tools and materials reflecting necessary advances in manufacturing required to make fly-by-light avionics systems marketable.

  15. Nanocrystalline magnetic materials obtained by flash annealing

    Directory of Open Access Journals (Sweden)

    R.K. Murakami

    1999-04-01

    Full Text Available The aim of the present work was to produce enhanced-remanence nanocrystalline magnetic material by crystallizing amorphous or partially amorphous Pr4.5Fe77B18.5 alloys by the flash annealing process, also known as the dc-Joule heating process, and to determine the optimal conditions for obtaining good magnetic coupling between the magnetic phases present in this material. Ribbons of Pr4.5Fe77B18.5 were produced by melt spinning and then annealed for 10-30 s at temperatures 500 - 640 °C by passing current through the sample to develop the enhanced-remanence nanocrystalline magnetic material. These materials were studied by X-ray diffraction, differential thermal analysis and magnetic measurements. Coercivity increases of up to 15% were systematically observed in relation to furnace-annealed material. Two different samples were carefully examined: (i a sample annealed at 600 °C which showed the highest coercive field Hc and remanence ratio Mr/Ms and (ii a sample annealed at 520 °C which showed phase separation in the second quadrant demagnetization curve. Our results are in agreement with other studies which show that flash annealing improves the magnetic properties of some amorphous ferromagnetic ribbons.

  16. Flash Infrared Thermography Contrast Data Analysis Technique

    Science.gov (United States)

    Koshti, Ajay

    2014-01-01

    This paper provides information on an IR Contrast technique that involves extracting normalized contrast versus time evolutions from the flash thermography inspection infrared video data. The analysis calculates thermal measurement features from the contrast evolution. In addition, simulation of the contrast evolution is achieved through calibration on measured contrast evolutions from many flat-bottom holes in the subject material. The measurement features and the contrast simulation are used to evaluate flash thermography data in order to characterize delamination-like anomalies. The thermal measurement features relate to the anomaly characteristics. The contrast evolution simulation is matched to the measured contrast evolution over an anomaly to provide an assessment of the anomaly depth and width which correspond to the depth and diameter of the equivalent flat-bottom hole (EFBH) similar to that used as input to the simulation. A similar analysis, in terms of diameter and depth of an equivalent uniform gap (EUG) providing a best match with the measured contrast evolution, is also provided. An edge detection technique called the half-max is used to measure width and length of the anomaly. Results of the half-max width and the EFBH/EUG diameter are compared to evaluate the anomaly. The information provided here is geared towards explaining the IR Contrast technique. Results from a limited amount of validation data on reinforced carbon-carbon (RCC) hardware are included in this paper.

  17. RESONANT CAVITY EXCITATION SYSTEM

    Science.gov (United States)

    Baker, W.R.; Kerns, Q.A.; Riedel, J.

    1959-01-13

    An apparatus is presented for exciting a cavity resonator with a minimum of difficulty and, more specifically describes a sub-exciter and an amplifier type pre-exciter for the high-frequency cxcitation of large cavities. Instead of applying full voltage to the main oscillator, a sub-excitation voltage is initially used to establish a base level of oscillation in the cavity. A portion of the cavity encrgy is coupled to the input of the pre-exciter where it is amplified and fed back into the cavity when the pre-exciter is energized. After the voltage in the cavity resonator has reached maximum value under excitation by the pre-exciter, full voltage is applied to the oscillator and the pre-exciter is tunned off. The cavity is then excited to the maximum high voltage value of radio frequency by the oscillator.

  18. Initial Electric Field Changes of Lightning Flashes in Two Thunderstorms

    Science.gov (United States)

    Marshall, T. C.; Stolzenburg, M.; Karunarathne, S.; Chapman, R.

    2015-12-01

    In a study of lightning initiation, Marshall et al. [2014, JGR Atmospheres] found that an initial electric field change (IEC) occurred before the initial breakdown (IB) pulses in 18 cloud-to-ground (CG) flashes and in 18 intracloud (IC) flashes. Because the IECs were small in amplitude and slowly developing (i.e., primarily electrostatic events), they were only detected by sensors within the reversal distance of each flash. In this presentation we report on a search for IECs in two small Florida thunderstorms that occurred close to several E-change sensors. One storm had 57 flashes; the other had only 13 flashes. The key result is that 69 of the 70 flashes began with detectable IECs. For the one flash without a detectable IEC, the closest sensor was at the reversal distance, presumably masking the IEC. Three of the flashes analyzed seemed to begin twice, in the sense that they had two sets of IB pulses; each beginning was preceded by an IEC.

  19. Algorithms for Lunar Flash Video Search, Measurement, and Archiving

    Science.gov (United States)

    Swift, Wesley; Suggs, Robert; Cooke, Bill

    2007-01-01

    Lunar meteoroid impact flashes provide a method to estimate the flux of the large meteoroid flux and thus their hazard to spacecraft. Although meteoroid impacts on the Moon have been detected using video methods for over a decade, the difficulty of manually searching hours of video for the rare, extremely brief impact flashes has discouraged the technique's systematic implementation. A prototype has been developed for the purpose of automatically searching lunar video records for impact flashes, eliminating false detections, editing the returned possible flashes, Z and archiving and documenting the results. The theory and organization of the program is discussed with emphasis on the filtering out of several classes of false detections and retaining the brief portions of the raw video necessary for in depth analysis of the flashes detected. Several utilities for measurement, analysis, and location of the flashes on the moon included in the program are demonstrated. Application of the program to a year's worth of lunar observations is discussed along with examples of impact flashes as well as several classes of false impact flashes.

  20. Assessment of Vulnerability to Extreme Flash Floods in Design Storms

    Directory of Open Access Journals (Sweden)

    Hyun Il Choi

    2011-07-01

    Full Text Available There has been an increase in the occurrence of sudden local flooding of great volume and short duration caused by heavy or excessive rainfall intensity over a small area, which presents the greatest potential danger threat to the natural environment, human life, public health and property, etc. Such flash floods have rapid runoff and debris flow that rises quickly with little or no advance warning to prevent flood damage. This study develops a flash flood index through the average of the same scale relative severity factors quantifying characteristics of hydrographs generated from a rainfall-runoff model for the long-term observed rainfall data in a small ungauged study basin, and presents regression equations between rainfall characteristics and the flash flood index. The aim of this study is to develop flash flood index-duration-frequency relation curves by combining the rainfall intensity-duration-frequency relation and the flash flood index from probability rainfall data in order to evaluate vulnerability to extreme flash floods in design storms. This study is an initial effort to quantify the flash flood severity of design storms for both existing and planned flood control facilities to cope with residual flood risks due to extreme flash floods that have ocurred frequently in recent years.

  1. Sunshine Trading: Flashes of Trading Intent at the NASDAQ

    NARCIS (Netherlands)

    J.A. Skjeltorp (Johannes); E. Sojli (Elvira); W.W. Tham (Wing Wah)

    2012-01-01

    textabstractWe use the introduction and the subsequent removal of the flash order facility (an actionable indication of interest, IOI) from the NASDAQ as a natural experiment to investigate the impact of voluntary disclosure of trading intent on market quality. We find that flash orders significantl

  2. Assessment of vulnerability to extreme flash floods in design storms.

    Science.gov (United States)

    Kim, Eung Seok; Choi, Hyun Il

    2011-07-01

    There has been an increase in the occurrence of sudden local flooding of great volume and short duration caused by heavy or excessive rainfall intensity over a small area, which presents the greatest potential danger threat to the natural environment, human life, public health and property, etc. Such flash floods have rapid runoff and debris flow that rises quickly with little or no advance warning to prevent flood damage. This study develops a flash flood index through the average of the same scale relative severity factors quantifying characteristics of hydrographs generated from a rainfall-runoff model for the long-term observed rainfall data in a small ungauged study basin, and presents regression equations between rainfall characteristics and the flash flood index. The aim of this study is to develop flash flood index-duration-frequency relation curves by combining the rainfall intensity-duration-frequency relation and the flash flood index from probability rainfall data in order to evaluate vulnerability to extreme flash floods in design storms. This study is an initial effort to quantify the flash flood severity of design storms for both existing and planned flood control facilities to cope with residual flood risks due to extreme flash floods that have ocurred frequently in recent years.

  3. Microstructure of wood charcoal prepared by flash heating

    NARCIS (Netherlands)

    Kurosaki, F; Ishimaru, K; Hata, T; Bronsveld, P; Kobayashi, E; Imamura, Y

    2003-01-01

    Carbonized wood prepared by flash heating at 800 degreesC for I h shows a different microstructure and surface chemical structure than char formed after slow heating at 4 degreesC/min to 800 degreesC for I h. Flash heating produces pores that are surrounded by aggregates of carbon structures 25 to 1

  4. The Prevalence and Phenomenology of Repetitive Behavior in Genetic Syndromes

    Science.gov (United States)

    Moss, Joanna; Oliver, Chris; Arron, Kate; Burbidge, Cheryl; Berg, Katy

    2009-01-01

    We investigated the prevalence and phenomenology of repetitive behavior in genetic syndromes to detail profiles of behavior. The Repetitive Behaviour Questionnaire (RBQ) provides fine-grained identification of repetitive behaviors. The RBQ was employed to examine repetitive behavior in Angelman (N = 104), Cornelia de Lange (N = 101), Cri-du-Chat…

  5. Flash ionisation signature in coherent cyclotron emission from Brown Dwarfs

    CERN Document Server

    Vorgul, Irena

    2016-01-01

    Brown dwarfs form mineral clouds in their atmospheres, where charged particles can produce large-scale discharges in form of lightning resulting in a substantial sudden increase of local ionisation. Brown dwarfs are observed to emit cyclotron radio emission. We show that signatures of strong transient atmospheric ionisation events (flash ionisation) can be imprinted on a pre-existing radiation. Detection of such flash ionisation events will open investigations into the ionisation state and atmospheric dynamics. Such ionisation events can also result from explosion shock waves, bursts or eruptions. We present an analytical model that describes the modulation of a pre-existing electromagnetic radiation by a time-dependent (flash) conductivity that is characteristic for flash ionisation events like lightning. Our conductivity model reproduces the conductivity function derived from observations of Terrestrial Gamma Ray Flashes, and is applicable to astrophysical objects with strong temporal variations in the loca...

  6. Lightning Mapping Array flash detection performance with variable receiver thresholds

    Science.gov (United States)

    Chmielewski, Vanna C.; Bruning, Eric C.

    2016-07-01

    This study characterizes Lightning Mapping Array performance for networks that participated in the Deep Convective Clouds and Chemistry field program using new Monte Carlo and curvature matrix model simulations. These open-source simulation tools are readily adapted to real-time operations or detailed studies of performance. Each simulation accounted for receiver threshold and location, as well as a reference distribution of source powers and flash sizes based on thunderstorm observations and the mechanics of station triggering. Source and flash detection efficiency were combined with solution bias and variability to predict flash area distortion at long ranges. Location errors and detection efficiency were highly dependent on the station configuration and thresholds, especially at longer ranges, such that performance varied more than expected across different networks and with azimuth within networks. Error characteristics matched prior studies, which led to an increase in flash distortion with range. Predicted flash detection efficiency exceeded 95% within 100 km of all networks.

  7. Likelihood methods and classical burster repetition

    CERN Document Server

    Graziani, C; Graziani, Carlo; Lamb, Donald Q

    1995-01-01

    We develop a likelihood methodology which can be used to search for evidence of burst repetition in the BATSE catalog, and to study the properties of the repetition signal. We use a simplified model of burst repetition in which a number N_{\\rm r} of sources which repeat a fixed number of times N_{\\rm rep} are superposed upon a number N_{\\rm nr} of non-repeating sources. The instrument exposure is explicitly taken into account. By computing the likelihood for the data, we construct a probability distribution in parameter space that may be used to infer the probability that a repetition signal is present, and to estimate the values of the repetition parameters. The likelihood function contains contributions from all the bursts, irrespective of the size of their positional errors --- the more uncertain a burst's position is, the less constraining is its contribution. Thus this approach makes maximal use of the data, and avoids the ambiguities of sample selection associated with data cuts on error circle size. We...

  8. First steps towards probing chemical systems and dynamics with free-electron laser radiation--case studies at the FLASH facility

    Energy Technology Data Exchange (ETDEWEB)

    Hallmann, J; Gruebel, S; Rajkovic, I; Quevedo, W; Busse, G; Scholz, M; More, R; Petri, M; Techert, S, E-mail: stecher@gwdg.d [Max Planck Institute for Biophysical Chemistry, IFG Structural Dynamics of (Bio)chemical Systems, Am Fassberg 11, 37077 Goettingen (Germany)

    2010-10-14

    It is expected that free-electron laser (FEL) radiation with its unique properties will allow real-time tracking of structural changes during chemical reactions. The methods suggested being applied range from x-ray spectroscopy to diffraction. In order to reach this goal, in this work we will present our studies utilizing soft x-ray FEL radiation generated at the FLASH facility. We will present case studies of ultrafast x-ray diffraction on nanocrystalline lamellar assemblies of chemical relevance and heat dissipation studies on polymer foils (upon FLASH excitation) as revealed by ultrafast optical reflectivity. The extension of these studies to characterize in vacuum water jets during their interaction with FEL radiation will be given at the end if this overview. In conclusion, it can be stated that FLASH-FEL radiation can be used for studying chemical processes as long as the pulse duration is smaller than the characteristic time scales of destruction (ionization) and heat dissipation processes.

  9. Features of positive ground flashes observed in Kathmandu Nepal

    Science.gov (United States)

    Adhikari, Pitri Bhakta; Sharma, Shriram; Baral, Kedarnath

    2016-07-01

    Lightning vertical electric fields pertinent to the subtropical thunderstorms occurring over the rugged terrain have been measured and recorded at a hilly station Kathmandu, Nepal. In the present work, waveforms of the positive ground flashes have been selected from all the records and were analyzed. To the best of our knowledge, this is the first time that fine structure of electric field signature pertinent to the positive return stroke; have been analyzed and presented from Nepal. One hundred and thirty three (133) of the total of four hundred twenty-five (425) flashes were selected from seven thunderstorm days and analyzed. Of the data recorded for seven days, 133 flashes (31.3%) were positive flashes and 276 flashes (64.9%) were cloud flashes. Majority of the positive ground flashes were found to be single stroke ones, whereas, the average number of strokes per flash is found to be 1.1 with a maximum value of 4. Majority of the positive ground flashes were found either lacking the initial breakdown process and the leader stage or these processes could not be detected. The return strokes are found to be succeeded by large in cloud activity in the continuing current portion of the flash. The average zero-crossing time of the positive return strokes was found to be 60.45 μs with a range of 447.81 μs and the average rise time was found to be 9.44 μs with a range of 42.56 μs.

  10. Mechanisms of cutaneous vasodilation during the postmenopausal hot flash

    Science.gov (United States)

    Low, David A.; Hubing, Kimberley A.; Del Coso, Juan; Crandall, Craig G.

    2010-01-01

    Objective Menopausal hot flashes can seriously disrupt the lives of symptomatic women. The physiological mechanisms of the hot flash efferent responses, particularly in the cutaneous circulation, are not completely understood. The aim of this study was to examine the mechanisms of increases in skin blood flow during the postmenopausal hot flash in symptomatic women. Methods Healthy postmenopausal women rested in a temperature controlled laboratory while responses prior to and during hot flashes were recorded for three unique protocols. Protocols 1 and 2: Women were locally pretreated with an intradermal injection of botulinum toxin A (BTX; blocks the release of neurotransmitters from sympathetic cholinergic nerves) in the forearm (protocol 1) and in the glabellar region (protocol 2). Protocol 3: Skin sympathetic nerve activity from the peroneal nerve was recorded, along with skin blood flow and sweating within the region innervated by that neural signal. Skin blood flow was indexed using laser-Doppler flowmetry at BTX-treated and adjacent untreated control sites. The onset of a hot flash was objectively identified as a transient and pronounced elevation of sternal sweat rate. Results The elevation in forearm (protocol 1) and glabellar skin blood flow (protocol 2) during hot flashes were attenuated at BTX sites relative to adjacent untreated sites (P<0.05 for both protocols). In protocol 3, skin sympathetic nerve activity significantly increased during hot flashes and returned to pre-flash levels following the hot flashes. Conclusion Elevations in skin blood flow during the postmenopausal hot flash are neurally mediated primarily through BTX sensitive nerves; presumably sympathetic cholinergic. PMID:21107299

  11. The ringer - An efficient, high repetition rate circuit for electromagnetic launchers

    Science.gov (United States)

    Giorgi, D.; Helava, H.; Lindner, K.; Long, J.; Zucker, O.

    1989-01-01

    The Meatgrinder is an efficient, current-multiplying circuit which can be used to optimize the energy transfer to various electromagnetic gun configurations. The authors present a simple variant of the Meatgrinder circuit which permits a first-order current profiling into the gun and recovery of the inductive energy in the barrel at a high repetition rate. The circuit is basically a one-stage Meatgrinder which utilizes the ringing of the energy storage capacitor (less than 40 percent reversal) to perform the opening switch function and a solid-state diode as the crowbar switch between the two mutually coupled inductors. With resonant charging, this results in a completely passive, high-repetiton-rate electromagnetic-gun power supply. Since most of the barrel energy is recovered, a railgun with negligible muzzle flash can be realized.

  12. Looking for Similarities Between Lowland (Flash) Floods

    Science.gov (United States)

    Brauer, C.; Teuling, R.; Torfs, P.; Hobbelt, L.; Jansen, F.; Melsen, L.; Uijlenhoet, R.

    2012-12-01

    On 26 August 2010 the eastern part of The Netherlands and the bordering part of Germany were struck by a series of rainfall events. Over an area of 740 km2 more than 120 mm of rainfall were observed in 24 h. We investigated the unprecedented flash flood triggered by this exceptionally heavy rainfall event (return period > 1000 years) in the 6.5 km2 Hupsel Brook catchment, which has been the experimental watershed employed by Wageningen University since the 1960s. This study improved our understanding of the dynamics of such lowland flash floods (Brauer et al., 2011). These observations, however, only show how our experimental catchment behaved and the results cannot be extrapolated directly to different floods in other (neighboring) lowland catchments. Therefore, it is necessary to use the information collected in one well-monitored catchment in combination with data from other, less well monitored catchments to find common signatures which could describe the runoff response during a lowland flood as a function of catchment characteristics. Because of the large spatial extent of the rainfall event in August 2010, many brooks and rivers in the Netherlands and Germany flooded. With data from several catchments we investigated the influence of rainfall and catchment characteristics (such as slope, size and land use) on the reaction of discharge to rainfall. We also investigated the runoff response in these catchments during previous floods by analyzing the relation between storage and discharge and the recession curve. In addition to the flood in August 2010, two other floods occurred in The Netherlands in recently. The three floods occurred in different parts of the country, after different types of rainfall events and with different initial conditions. We selected several catchments during each flood to compare their response and find out if these cases are fundamentally different or that they were produced by the same underlying processes and can be treated in a

  13. a simple a simple excitation control excitation control excitation ...

    African Journals Online (AJOL)

    eobe

    brushes for low power generators or brushless for high-power ... produce the primary dc fluxes are usually placed on the ... motor and the study was extended to over-excitation schemes ... automatic voltage controller (AVR) around this range.

  14. Fragile Landscape: Impact and Consequences of May 2014 Flash-flood Disaster in the Aqaba Area, Southern Jordan

    Directory of Open Access Journals (Sweden)

    Yahya Farhan

    2014-09-01

    Full Text Available Flash-flood disasters are common in the Aqaba area. It always has a significant impact on the city and causes immense damages to lives and the infrastructure (highways, roads and dwelling areas. Before the 1990s several flash-floods of medium and high magnitudes were recorded (i.e., the 1963 and 1966 floods. However, low and medium magnitude floods (6-7 and 20 year return period have been a recurrent phenomena over the last three decades. The city and the port of Aqaba are considered crucial to the Jordanian economy and cosequently the protection of the city/port from repetitive flooding is important to maintain future urban and economic development. Since the 1960s all formulated development plans for the city and the southern coast have suffered from a remarkable lack of appreciation and awareness regarding environmental hazards, where 90% of the Aqaba area is exposed to flood and sediment hazards. An intensive post-event geomorphic survey was carried out following a flash-flood that struck the Aqaba area on 6-7th May 2014 to identify the damages that occurred and to recognize the main hydrological characteristics of the flash-flood, the terrain favoring flooding, fluvial processes which initiate large gullies and finally to gain experience regarding natural hazards. Hydrological studies related to previous flooding events indicate that the Aqaba area is exposed to recurrent floods of different magnitudes, associated with high peak discharge, gully erosion, slumping and high sediment load. These caused serious damages to the properties and infrastructure, loss of life and hardship for the people of Aqaba. The resultant large gullies are considered an additional cause of instability and a sediment source which threatened the Aqaba area.

  15. 浅析OpenFlashChart的使用%Brief Introduction Usage of Open Flash Chart

    Institute of Scientific and Technical Information of China (English)

    周伟伟; 童敏娟

    2012-01-01

    Open Flash Chart是基于Web网络应用图表技术,用简单方便配置提供出绚丽动画效果,并且图表类型丰富多彩、数据文件结构清晰而明了.通过Open Flash Chart可以生成线图、饼状图、柱状图、雷达图、区域图以及组合图表等.设定颜色、字体、背景等CSS样式,为用户提供了大量可选择的数据图表显示方式.

  16. Article coated with flash bonded superhydrophobic particles

    Science.gov (United States)

    Simpson, John T [Clinton, TN; Blue, Craig A [Knoxville, TN; Kiggans, Jr., James O [Oak Ridge, TN

    2010-07-13

    A method of making article having a superhydrophobic surface includes: providing a solid body defining at least one surface; applying to the surface a plurality of diatomaceous earth particles and/or particles characterized by particle sizes ranging from at least 100 nm to about 10 .mu.m, the particles being further characterized by a plurality of nanopores, wherein at least some of the nanopores provide flow through porosity, the particles being further characterized by a plurality of spaced apart nanostructured features that include a contiguous, protrusive material; flash bonding the particles to the surface so that the particles are adherently bonded to the surface; and applying a hydrophobic coating layer to the surface and the particles so that the hydrophobic coating layer conforms to the nanostructured features.

  17. Flash photolysis-shock tube studies

    Energy Technology Data Exchange (ETDEWEB)

    Michael, J.V. [Argonne National Laboratory, IL (United States)

    1993-12-01

    Even though this project in the past has concentrated on the measurement of thermal bimolecular reactions of atomic species with stable molecules by the flash or laser photolysis-shock tube (FP- or LP-ST) method using atomic resonance absorption spectrometry (ARAS) as the diagnostic technique, during the past year the authors have concentrated on studies of the thermal decompositions of selected chlorocarbon molecules. These studies are necessary if the degradation of chlorine containing organic molecules by incineration are to be understood at the molecular level. Clearly, destruction of these molecules will not only involve abstraction reactions, when possible, but also thermal decomposition followed by secondary reactions of the initially formed atoms and radicals. Studies on the thermal decomposition of CH{sub 3}Cl are complete, and the curve-of-growth for Cl-atom atomic resonance absorption has been determined. The new thermal decomposition studies are similar to those already reported for CH{sub 3}Cl.

  18. A new French flash flood warning service

    Directory of Open Access Journals (Sweden)

    de Saint-Aubin Céline

    2016-01-01

    Full Text Available The French State services in charge of flood forecasting supervise about 22,000 km among the 120,000 km of the French rivers within a warning procedure called Vigilance Crues (http://www.vigicrues.gouv.fr. Some recent dramatic flood events on small watershed not covered by Vigilance Crues highlight the need for a new warning procedure to anticipate violent flash floods that regularly affect rapid river-basins. Thus the concept emerged of an automatic warning service specifically dedicated to local crisis managers. This service will be less elaborated than Vigilance Crues, probably with false alarms and missed events sometimes, but it will deliver a first information. The generation of the warning is based on a simple rainfall-runoff hydrological model developed by Irstea on all French rivers, fed with radar-gauge rainfall grids provided by Meteo-France. Every fifteen minutes, the hydrological model estimates the discharges on the rivers eligible to the service and determine if certain thresholds corresponding to a high or very high flood are likely to be exceeded. The last step of the real-time system is to determine which municipalities are concerned with flood risk and send them an automatic warning by voice call, optionally by sms or email. A specific web interface is available for users to monitor the evolution of the flood risk on maps that are updated every 15 minutes. This new flash flood warning service will be operational early 2017 as a free service for about 8,000 French municipalities.

  19. Role of repetitive transcranial magnetic stimulation in stroke rehabilitation.

    Science.gov (United States)

    Pinter, Michaela M; Brainin, Michael

    2013-01-01

    In recent years, efforts have focused on investigating the neurophysiological changes that occur in the brain after stroke, and on developing novel strategies such as additional brain stimulation to enhance sensorimotor and cognitive recovery. In the 1990s, repetitive transcranial magnetic stimulation (rTMS) was introduced as a therapeutic tool for improving the efficacy of rehabilitation for recovery after stroke. It is evident that disturbances of interhemispheric processes after stroke result in a pathological hyperactivity of the intact hemisphere. The rationale of using rTMS as a complementary therapy is mainly to decrease the cortical excitability in regions that are presumed to hinder optimal recovery by low-frequency rTMS delivered to the unaffected hemisphere, while high-frequency rTMS delivered to the affected hemisphere facilitates cortical excitability. However, the exact mechanisms of how rTMS works are still under investigation. There is a growing body of research in stroke patients investigating the effect of rTMS on facilitating recovery by modifying cortical and subcortical networks. Clinical trials applying rTMS already yielded promising results in improving recovery of sensorimotor and cognitive functions. Altogether, in combination with conventional therapeutic approaches, rTMS has a potential to become a complementary strategy to enhance stroke recovery by modulating the excitability of targeted brain areas. In future studies, emphasis should be placed on selecting patient populations to determine whether treatment response depends on age, lesion acuteness, or stroke severity. Furthermore, it is important to identify parameters optimizing the beneficial effects of rTMS on stroke recovery, and to monitor their long-term effects.

  20. Storage Coding for Wear Leveling in Flash Memories

    CERN Document Server

    Anxiao,; Mateescu, Robert; Yaakobi, Eitan; Bruck, Jehoshua; Siegel, Paul H; Vardy, Alexander; Wolf, Jack K

    2009-01-01

    Flash memory is a non-volatile computer memory comprised of blocks of cells, wherein each cell is implemented as either NAND or NOR floating gate. NAND flash is currently the most widely used type of flash memory. In a NAND flash memory, every block of cells consists of numerous pages; rewriting even a single page requires the whole block to be erased and reprogrammed. Block erasures determine both the longevity and the efficiency of a flash memory. Therefore, when data in a NAND flash memory are reorganized, minimizing the total number of block erasures required to achieve the desired data movement is an important goal. This leads to the flash data movement problem studied in this paper. We show that coding can significantly reduce the number of block erasures required for data movement, and present several optimal or nearly optimal data-movement algorithms based upon ideas from coding theory and combinatorics. In particular, we show that the sorting-based (non-coding) schemes require at least O(nlogn) erasu...

  1. Simulated CONUS Flash Flood Climatologies from Distributed Hydrologic Models

    Science.gov (United States)

    Flamig, Z.; Gourley, J. J.; Vergara, H. J.; Kirstetter, P. E.; Hong, Y.

    2016-12-01

    This study will describe a CONUS flash flood climatology created over the period from 2002 through 2011. The MRMS reanalysis precipitation dataset was used as forcing into the Ensemble Framework For Flash Flood Forecasting (EF5). This high resolution 1-sq km 5-minute dataset is ideal for simulating flash floods with a distributed hydrologic model. EF5 features multiple water balance components including SAC-SMA, CREST, and a hydrophobic model all coupled with kinematic wave routing. The EF5/SAC-SMA and EF5/CREST water balance schemes were used for the creation of dual flash flood climatologies based on the differing water balance principles. For the period from 2002 through 2011 the daily maximum streamflow, unit streamflow, and time of peak streamflow was stored along with the minimum soil moisture. These variables are used to describe the states of the soils right before a flash flood event and the peak streamflow that was simulated during the flash flood event. The results will be shown, compared and contrasted. The resulting model simulations will be verified on basins less than 1,000-sq km with USGS gauges to ensure the distributed hydrologic models are reliable. The results will also be compared spatially to Storm Data flash flood event observations to judge the degree of agreement between the simulated climatologies and observations.

  2. Flash ionization signature in coherent cyclotron emission from brown dwarfs

    Science.gov (United States)

    Vorgul, I.; Helling, Ch.

    2016-05-01

    Brown dwarfs (BDs) form mineral clouds in their atmospheres, where charged particles can produce large-scale discharges in the form of lightning resulting in substantial sudden increase of local ionization. BDs are observed to emit cyclotron radio emission. We show that signatures of strong transient atmospheric ionization events (flash ionization) can be imprinted on a pre-existing radiation. Detection of such flash ionization events will open investigations into the ionization state and atmospheric dynamics. Such events can also result from explosion shock waves, material outbursts or (volcanic) eruptions. We present an analytical model that describes the modulation of a pre-existing electromagnetic radiation by a time-dependent (flash) conductivity that is characteristic for flash ionization events like lightning. Our conductivity model reproduces the conductivity function derived from observations of terrestrial gamma-ray flashes, and is applicable to astrophysical objects with strong temporal variations in the local ionization, as in planetary atmospheres and protoplanetary discs. We show that the field responds with a characteristic flash-shaped pulse to a conductivity flash of intermediate intensity. More powerful ionization events result in smaller variations of the initial radiation, or in its damping. We show that the characteristic damping of the response field for high-power initial radiation carries information about the ionization flash magnitude and duration. The duration of the pulse amplification or the damping is consistently shorter for larger conductivity variations and can be used to evaluate the intensity of the flash ionization. Our work suggests that cyclotron emission could be probe signals for electrification processes inside BD atmosphere.

  3. Weak positive cloud-to-ground flashes in Northeastern Colorado

    Science.gov (United States)

    Lopez, Raul E.; Maier, Michael W.; Garcia-Miguel, Juan A.; Holle, Ronald L.

    1991-01-01

    The frequency distributions of the peak magnetic field associated with the first detected return stroke of positive and negative cloud-to-ground (CG) flashes were studied using lightning data from northeastern Colorado. These data were obtained during 1985 with a medium-to-high gain network of three direction finders (DF's). The median signal strength of positive flashes was almost two times that of the negatives for flashes within 300 km of the DF's, which have an inherent detection-threshold bias that tends to discriminate against weak signals. This bias increases with range, and affects the detection of positive and negative flashes in different ways, because of the differing character of their distributions. Positive flashes appear to have a large percentage of signals clustered around very weak values that are lost to the medium-to-high gain Colorado Detection System very quickly with increasing range. The resulting median for positive signals could thus appear to be much larger than the median for negative signals, which are more clustered around intermediate values. When only flashes very close to the DF's are considered, however, the two distributions have almost identical medians. The large percentage of weak positive signals detected close to the DF's has not been explored previously. They have been suggested to come from intracloud discharges and thus are improperly classified as CG flashes. Evidence in hand, points to their being real positive, albeit weak CG flashes. Whether or not they are real positive ground flashes, it is important to be aware of their presence in data from magnetic DF networks.

  4. Portable vibration exciter

    Science.gov (United States)

    Beecher, L. C.; Williams, F. T.

    1970-01-01

    Gas-driven vibration exciter produces a sinusoidal excitation function controllable in frequency and in amplitude. It allows direct vibration testing of components under normal loads, removing the possibility of component damage due to high static pressure.

  5. Ruthenium-phenothiazine electron transfer dyad with a photoswitchable dithienylethene bridge: flash-quench studies with methylviologen.

    Science.gov (United States)

    He, Bice; Wenger, Oliver S

    2012-04-02

    A molecular ensemble composed of a phenothiazine (PTZ) electron donor, a photoisomerizable dithienylethene (DTE) bridge, and a Ru(bpy)(3)(2+) (bpy = 2,2'-bipyridine) electron acceptor was synthesized and investigated by optical spectroscopic and electrochemical means. Our initial intention was to perform flash-quench transient absorption studies in which the Ru(bpy)(3)(2+) unit is excited selectively ("flash") and its (3)MLCT excited state is quenched oxidatively ("quench") by excess methylviologen prior to intramolecular electron transfer from phenothiazine to Ru(III) across the dithienylethene bridge. However, after selective Ru(bpy)(3)(2+1)MLCT excitation of the dyad with the DTE bridge in its open form, (1)MLCT → (3)MLCT intersystem crossing on the metal complex is followed by triplet-triplet energy transfer to a (3)π-π* state localized on the DTE unit. This energy transfer process is faster than bimolecular oxidative quenching with methylviologen at the ruthenium site (Ru(III) is not observed); only the triplet-excited DTE then undergoes rapid (10 ns, instrumentally limited) bimolecular electron transfer with methylviologen. Subsequently, there is intramolecular electron transfer with PTZ. The time constant for formation of the phenothiazine radical cation via intramolecular electron transfer occurring over two p-xylene units is 41 ns. When the DTE bridge is photoisomerized to the closed form, PTZ(+) cannot be observed any more. Irrespective of the wavelength at which the closed isomer is irradiated, most of the excitation energy appears to be funneled rapidly into a DTE-localized singlet excited state from which photoisomerization to the open form occurs within picoseconds.

  6. The neurobiology of repetitive behavior : of mice…

    NARCIS (Netherlands)

    Langen, Marieke; Kas, Martien J H; Staal, Wouter G; van Engeland, Herman; Durston, Sarah

    2011-01-01

    Repetitive and stereotyped behavior is a prominent element of both animal and human behavior. Similar behavior is seen across species, in diverse neuropsychiatric disorders and in key phases of typical development. This raises the question whether these similar classes of behavior are caused by simi

  7. Large-scale detection of repetitions.

    Science.gov (United States)

    Smyth, W F

    2014-05-28

    Combinatorics on words began more than a century ago with a demonstration that an infinitely long string with no repetitions could be constructed on an alphabet of only three letters. Computing all the repetitions (such as ∙∙∙TTT ∙∙∙ or ∙∙∙ CGACGA ∙∙∙ ) in a given string x of length n is one of the oldest and most important problems of computational stringology, requiring time in the worst case. About a dozen years ago, it was discovered that repetitions can be computed as a by-product of the Θ(n)-time computation of all the maximal periodicities or runs in x. However, even though the computation is linear, it is also brute force: global data structures, such as the suffix array, the longest common prefix array and the Lempel-Ziv factorization, need to be computed in a preprocessing phase. Furthermore, all of this effort is required despite the fact that the expected number of runs in a string is generally a small fraction of the string length. In this paper, I explore the possibility that repetitions (perhaps also other regularities in strings) can be computed in a manner commensurate with the size of the output.

  8. Verbal Repetitions and Echolalia in Alzheimer's Discourse

    Science.gov (United States)

    Da Cruz, Fernanda Miranda

    2010-01-01

    This article reports on an investigation of echolalic repetition in Alzheimer's disease (AD). A qualitative analysis of data from spontaneous conversations with MHI, a woman with AD, is presented. The data come from the DALI Corpus, a corpus of spontaneous conversations involving subjects with AD. This study argues that echolalic effects can be…

  9. Neurobehavioural Correlates of Abnormal Repetitive Behaviour

    Directory of Open Access Journals (Sweden)

    R. A. Ford

    1991-01-01

    Full Text Available Conditions in which echolalia and echopraxia occur are reviewed, followed by an attempt to elicit possible mechanisms of these phenomena. A brief description of stereotypical and perseverative behaviour and obsessional phenomena is given. It is suggested that abnormal repetitive behaviour may occur partly as a result of central dopaminergic dysfunction.

  10. Reducing Repetitive Speech: Effects of Strategy Instruction.

    Science.gov (United States)

    Dipipi, Caroline M.; Jitendra, Asha K.; Miller, Judith A.

    2001-01-01

    This article describes an intervention with an 18-year-old young woman with mild mental retardation and a seizure disorder, which focused on her repetitive echolalic verbalizations. The intervention included time delay, differential reinforcement of other behaviors, and self-monitoring. Overall, the intervention was successful in facilitating…

  11. Verbal Repetitions and Echolalia in Alzheimer's Discourse

    Science.gov (United States)

    Da Cruz, Fernanda Miranda

    2010-01-01

    This article reports on an investigation of echolalic repetition in Alzheimer's disease (AD). A qualitative analysis of data from spontaneous conversations with MHI, a woman with AD, is presented. The data come from the DALI Corpus, a corpus of spontaneous conversations involving subjects with AD. This study argues that echolalic effects can be…

  12. Gamma ray flashes add to mystery of upper atmosphere

    Science.gov (United States)

    Atmospheric electricity research has come a long way since Benjamin Franklin's kite-flying days. But what researchers have been learning lately about above-thunderstorm electricity has wrought a whole new era of mysteries.For a start, last summer a Colorado meteorologist sparked interest in a terrestrial phenomenon that the community first observed more than 100 years ago: optical flashes that occur above thunderstorms—at least 30 km above Earth. Walter Lyons with the Ft. Collins-based Mission Research Corporation, demonstrated that such flashes are not anomalies, as conventional scientific wisdom had held. He filmed hundreds of flashes during a 2-week period.

  13. FLASH is an essential component of Cajal bodies.

    Science.gov (United States)

    Barcaroli, D; Dinsdale, D; Neale, M H; Bongiorno-Borbone, L; Ranalli, M; Munarriz, E; Sayan, A E; McWilliam, J M; Smith, T M; Fava, E; Knight, R A; Melino, G; De Laurenzi, V

    2006-10-03

    Cajal bodies are small nuclear organelles with a number of nuclear functions. Here we show that FLICE-associated huge protein (FLASH), originally described as a component of the apoptosis signaling pathway, is mainly localized in Cajal bodies and is essential for their structure. Reduction in FLASH expression by short hairpin RNA results in disruption of the normal architecture of the Cajal body and relocalization of its components. Because the function of FLASH in the apoptosis receptor signaling pathway has been strongly questioned, we have now identified a clear function for this protein.

  14. FLASH-OFDM-通信业的新宠

    Institute of Scientific and Technical Information of China (English)

    李勇民

    2008-01-01

    OFDM技术是宽带无线接(BWA)领域内的一种重要技术,本文从介绍OFDM原理入手,突出了它抗干扰能力强、频谱利用率高等特点,而FLASH-OFDM则是OFDM技术中的一种.之后进一步介绍了FLASH-OFDM技术的协议模型,对物理层、MAC/路层和网络层进行了详细的介绍,从而得到了FLASH-OFDM技术的优越性.

  15. Simultaneous two-photon excitation of photodynamic therapy agents

    Science.gov (United States)

    Wachter, Eric A.; Partridge, W. P., Jr.; Fisher, Walter G.; Dees, Craig; Petersen, Mark G.

    1998-07-01

    The spectroscopic and photochemical properties of several photosensitive compounds are compared using conventional single-photon excitation (SPE) and simultaneous two-photon excitation (TPE). TPE is achieved using a mode-locked titanium:sapphire laser, the near infrared output of which allows direct promotion of non-resonant TPE. Excitation spectra and excited state properties of both type I and type II photodynamic therapy (PDT) agents are examined. In general, while SPE and TPE selection rules may be somewhat different, the excited state photochemical properties are equivalent for both modes of excitation. In vitro promotion of a two-photon photodynamic effect is demonstrated using bacterial and human breast cancer models. These results suggest that use of TPE may be beneficial for PDT, since the technique allows replacement of visible or ultraviolet excitation with non- damaging near infrared light. Further, a comparison of possible excitation sources for TPE indicates that the titanium:sapphire laser is exceptionally well suited for non- linear excitation of PDT agents in biological systems due to its extremely short pulse width and high repetition rate; these features combine to effect efficient PDT activation with minimal potential for non-specific biological damage.

  16. Non-destructive Testing by Infrared Thermography Under Random Excitation and ARMA Analysis

    Science.gov (United States)

    Bodnar, J. L.; Nicolas, J. L.; Candoré, J. C.; Detalle, V.

    2012-11-01

    Photothermal thermography is a non-destructive testing (NDT) method, which has many applications in the field of control and characterization of thin materials. This technique is usually implemented under CW or flash excitation. Such excitations are not adapted for control of fragile materials or for multi-frequency analysis. To allow these analyses, in this article, the use of a new control mode is proposed: infrared thermography under random excitation and auto regressive moving average analysis. First, the principle of this NDT method is presented. Then, the method is shown to permit detection, with low energy constraints, of detachments situated in mural paintings.

  17. Heavy rainfall induced flash flood management

    Science.gov (United States)

    Weiler, Markus; Steinbrich, Andreas; Stölzle, Michael; Leistert, Hannes

    2016-04-01

    Heavy rain induced flash floods are still a serious hazard. In context of climate change even a rise of threat potential of flash flood must be suspected. To improve prediction of endangered areas hydraulic models was developed in the past that implement topography information in heigh resolution, gathered by laser scan applications. To run such models it is crucial to estimate the runoff input spatial distributed. However, this information is usually derived with relatively simple models lacking the process rigour that is required for prediction in engaged basins. Though available rain runoff models are able to model runoff response integral for measured catchments they do not indicate the spatial distribution of processes. Moreover they are commonly calibrated to measured runoff data and not applicable in other environments. Since runoff generation is commonly not measured, a calibration on it is hardly possible. In this study, we present a new approach for quantification of runoff generation in height spatial and temporal resolution. A suited model needs to work without calibration in every given environment under any given conditions. It is possible to develop such a model by combining spatial distributed input data of land surface properties (e.g. soil, geology, land use, …) with worldwide findings of runoff generation research. We developed such a model for the state of Baden-Württemberg, what has an extensive pool of spatial data. E.g. a digital elevation model of 1*1m² resolution, degree of sealing of the earth surface in 1*1m² resolution, soil properties (1:50.000) and geology (1:200.000). Within the state of Baden-Württemberg different regions are situated, with distinct environmental characteristics concerning as well climate, soil properties, land use, topography and geology. The model was tested and validated by modelling 36 observed flood events in 13 mesoscale catchments representing the different regions of Baden-Württemberg as well as by

  18. Repetitive magnetic stimulation affects the microenvironment of nerve regeneration and evoked potentials after spinal cord injury.

    Science.gov (United States)

    Jiang, Jin-Lan; Guo, Xu-Dong; Zhang, Shu-Quan; Wang, Xin-Gang; Wu, Shi-Feng

    2016-05-01

    Repetitive magnetic stimulation has been shown to alter local blood flow of the brain, excite the corticospinal tract and muscle, and induce motor function recovery. We established a rat model of acute spinal cord injury using the modified Allen's method. After 4 hours of injury, rat models received repetitive magnetic stimulation, with a stimulus intensity of 35% maximum output intensity, 5-Hz frequency, 5 seconds for each sequence, and an interval of 2 minutes. This was repeated for a total of 10 sequences, once a day, 5 days in a week, for 2 consecutive weeks. After repetitive magnetic stimulation, the number of apoptotic cells decreased, matrix metalloproteinase 9/2 gene and protein expression decreased, nestin expression increased, somatosensory and motor-evoked potentials recovered, and motor function recovered in the injured spinal cord. These findings confirm that repetitive magnetic stimulation of the spinal cord improved the microenvironment of neural regeneration, reduced neuronal apoptosis, and induced neuroprotective and repair effects on the injured spinal cord.

  19. Repetitive magnetic stimulation affects the microenvironment of nerve regeneration and evoked potentials after spinal cord injury

    Directory of Open Access Journals (Sweden)

    Jin-lan Jiang

    2016-01-01

    Full Text Available Repetitive magnetic stimulation has been shown to alter local blood flow of the brain, excite the corticospinal tract and muscle, and induce motor function recovery. We established a rat model of acute spinal cord injury using the modified Allen′s method. After 4 hours of injury, rat models received repetitive magnetic stimulation, with a stimulus intensity of 35% maximum output intensity, 5-Hz frequency, 5 seconds for each sequence, and an interval of 2 minutes. This was repeated for a total of 10 sequences, once a day, 5 days in a week, for 2 consecutive weeks. After repetitive magnetic stimulation, the number of apoptotic cells decreased, matrix metalloproteinase 9/2 gene and protein expression decreased, nestin expression increased, somatosensory and motor-evoked potentials recovered, and motor function recovered in the injured spinal cord. These findings confirm that repetitive magnetic stimulation of the spinal cord improved the microenvironment of neural regeneration, reduced neuronal apoptosis, and induced neuroprotective and repair effects on the injured spinal cord.

  20. Multi-frequency excitation

    KAUST Repository

    Younis, Mohammad I.

    2016-03-10

    Embodiments of multi-frequency excitation are described. In various embodiments, a natural frequency of a device may be determined. In turn, a first voltage amplitude and first fixed frequency of a first source of excitation can be selected for the device based on the natural frequency. Additionally, a second voltage amplitude of a second source of excitation can be selected for the device, and the first and second sources of excitation can be applied to the device. After applying the first and second sources of excitation, a frequency of the second source of excitation can be swept. Using the methods of multi- frequency excitation described herein, new operating frequencies, operating frequency ranges, resonance frequencies, resonance frequency ranges, and/or resonance responses can be achieved for devices and systems.

  1. Robust Flash 3D-FPA Sensor Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Advanced Scientific Concepts, Inc. (ASC) is a small business, which has developed a compact, eye-safe 3D Flash LIDARTM Camera (FLC) well suited for real-time...

  2. Flash3D EDL Sensor Technology Advancement Project

    Data.gov (United States)

    National Aeronautics and Space Administration — 3D Flash LIDAR is ideal for determining real-time spacecraft trajectory, speed, orientation, and range to the planet surface, as well as evaluating potential hazards...

  3. Flash 3D Rendezvous and Docking Sensor Project

    Data.gov (United States)

    National Aeronautics and Space Administration — 3D Flash Ladar is a breakthrough technology for many emerging and existing 3D vision areas, and sensor improvements will have an impact on nearly all these fields....

  4. Space Qualified, Radiation Hardened, Dense Monolithic Flash Memory Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Space Micro proposes to build a radiation hardened by design (RHBD) flash memory, using a modified version of our RH-eDRAM Memory Controller to solve all the single...

  5. The Essential Guide to 3D in Flash

    CERN Document Server

    Olsson, Ronald A

    2010-01-01

    If you are an ActionScript developer or designer and you would like to work with 3D in Flash, this book is for you. You will learn the core Flash 3D concepts, using the open source Away3D engine as a primary tool. Once you have mastered these skills, you will be able to realize the possibilities that the available Flash 3D engines, languages, and technologies have to offer you with Flash and 3D.* Describes 3D concepts in theory and their implementation using Away3D* Dives right in to show readers how to quickly create an interactive, animated 3D scene, and builds on that experience throughout

  6. Photosynthetic efficiency of Chlamydomonas reinhardtii in flashing light

    NARCIS (Netherlands)

    Vejrazka, C.; Janssen, M.G.J.; Streefland, M.; Wijffels, R.H.

    2011-01-01

    Efficient light to biomass conversion in photobioreactors is crucial for economically feasible microalgae production processes. It has been suggested that photosynthesis is enhanced in short light path photobioreactors by mixing-induced flashing light regimes. In this study, photosynthetic efficienc

  7. Quantitative observation of light flash sensations experiment MA-106

    Science.gov (United States)

    Budinger, T. F.; Tobias, C. A.; Schopper, E.; Schott, J. U.; Huesman, R. H.; Upham, F. T.; Wieskamp, T. F.; Kucala, J. M.; Goulding, F. S.; Landis, D. A.

    1976-01-01

    Light flashes caused by the interaction of cosmic particles with the visual apparatus have been observed by astronauts on all space missions since Apollo 11. This Apollo Soyuz Test Project experiment compared measurements of the observer's visual sensitivity with measurements of the ambient radiation environment and with the frequency and character of the flashes observed. The data obtained reveal a latitude dependence of the frequency of observed flashes. This distribution of flashes is correlated with the distribution of cosmic particles with stopping power greater than 15 keV/ micrometers in the eye. The interaction of dark adaptation, specific ionization, and range of particles in the retina as factors in the visualization of particle passage is discussed.

  8. Flash Cracking Reactor for Waste Plastic Processing Project

    Data.gov (United States)

    National Aeronautics and Space Administration — We propose to design, model, build, and test a novel flash cracking reactor to convert plastic waste, and potentially other unconventional hydrocarbon feedstocks,...

  9. Impact of rainfall spatial variability on Flash Flood Forecasting

    Science.gov (United States)

    Douinot, Audrey; Roux, Hélène; Garambois, Pierre-André; Larnier, Kevin

    2014-05-01

    According to the United States National Hazard Statistics database, flooding and flash flooding have caused the largest number of deaths of any weather-related phenomenon over the last 30 years (Flash Flood Guidance Improvement Team, 2003). Like the storms that cause them, flash floods are very variable and non-linear phenomena in time and space, with the result that understanding and anticipating flash flood genesis is far from straightforward. In the U.S., the Flash Flood Guidance (FFG) estimates the average number of inches of rainfall for given durations required to produce flash flooding in the indicated county. In Europe, flash flood often occurred on small catchments (approximately 100 km2) and it has been shown that the spatial variability of rainfall has a great impact on the catchment response (Le Lay and Saulnier, 2007). Therefore, in this study, based on the Flash flood Guidance method, rainfall spatial variability information is introduced in the threshold estimation. As for FFG, the threshold is the number of millimeters of rainfall required to produce a discharge higher than the discharge corresponding to the first level (yellow) warning of the French flood warning service (SCHAPI: Service Central d'Hydrométéorologie et d'Appui à la Prévision des Inondations). The indexes δ1 and δ2 of Zoccatelli et al. (2010), based on the spatial moments of catchment rainfall, are used to characterize the rainfall spatial distribution. Rainfall spatial variability impacts on warning threshold and on hydrological processes are then studied. The spatially distributed hydrological model MARINE (Roux et al., 2011), dedicated to flash flood prediction is forced with synthetic rainfall patterns of different spatial distributions. This allows the determination of a warning threshold diagram: knowing the spatial distribution of the rainfall forecast and therefore the 2 indexes δ1 and δ2, the threshold value is read on the diagram. A warning threshold diagram is

  10. Photosynthetic efficiency of Chlamydomonas reinhardtii in flashing light

    NARCIS (Netherlands)

    Vejrazka, C.; Janssen, M.G.J.; Streefland, M.; Wijffels, R.H.

    2011-01-01

    Efficient light to biomass conversion in photobioreactors is crucial for economically feasible microalgae production processes. It has been suggested that photosynthesis is enhanced in short light path photobioreactors by mixing-induced flashing light regimes. In this study, photosynthetic

  11. Distributed query processing in flash-based sensor networks

    Institute of Scientific and Technical Information of China (English)

    Jianliang XU; Xueyan TANG; Wang-Chien LEE

    2008-01-01

    Wireless sensor networks are used in a large array of applications to capture,collect,and analyze physical environmental data.Many existing sensor systems instruct sensor nodes to report their measurements to central repositories outside the network,which is expensive in energy cost.Recent technological advances in flash memory have given rise to the development of storagecentric sensor networks,where sensor nodes are equipped with high-capacity flash memory storage such that sensor data can b.e stored and managed inside the network to reduce expensive communication.This novel architecture calls for new data management techniques to fully exploit distributed in-network data storage.This paper describes some of our research on distributed query processing in such flash-based sensor networks.Of particular interests are the issues that arise in the design of storage management and indexing structures combining sensor system workload and read/write/erase characteristics of flash memory.

  12. 3D Flash LIDAR EDL Resolution Improvement Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Advanced Scientific Concepts, Inc. (ASC) is a small business, which has developed a compact, eye-safe 3D Flash LIDARTM Camera (FLC) well suited for real-time...

  13. 3D Flash LIDAR Real-Time Embedded Processing Project

    Data.gov (United States)

    National Aeronautics and Space Administration — 3D Flash LIDAR (3DFL) is ideal for determining real-time spacecraft trajectory, speed and orientation to the planet surface, as well as evaluating potential hazards...

  14. Interim report on flash floods, Area 5 - Nevada Test Site

    Energy Technology Data Exchange (ETDEWEB)

    French, R.H.

    1980-09-01

    Examination of the presently available data indicates that consideration must be given to the possibility of flash floods when siting waste management facilities in Area 5 of the Nevada Test Site. 6 figures, 7 tables.

  15. Percepciones sobre seguridad ciudadana en Lima. Encuesta Flash

    OpenAIRE

    Zavaleta Martínez Vargas, Alfonso; Chávez, Virgilio; Tapia, Luis; Vertiz, Rosa

    2016-01-01

    La investigación presenta un aporte relacionado con "consumo de drogas cocaínicas, alcohol y violencia". Resultados de la encuesta flash "Seguridad Ciudadana" realizada por CEDRO en diciembre de 2015.

  16. 3D Flash LIDAR Real-Time Embedded Processing Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Advanced Scientific Concepts, Inc. (ASC) is a small business, which has developed a compact, eye-safe 3D Flash LIDARTM Camera (FLC) well suited for real-time...

  17. Dynamic simulation of flash drums using rigorous physical property calculations

    Directory of Open Access Journals (Sweden)

    F. M. Gonçalves

    2007-06-01

    Full Text Available The dynamics of flash drums is simulated using a formulation adequate for phase modeling with equations of state (EOS. The energy and mass balances are written as differential equations for the internal energy and the number of moles of each species. The algebraic equations of the model, solved at each time step, are those of a flash with specified internal energy, volume and mole numbers (UVN flash. A new aspect of our dynamic simulations is the use of direct iterations in phase volumes (instead of pressure for solving the algebraic equations. It was also found that an iterative procedure previously suggested in the literature for UVN flashes becomes unreliable close to phase boundaries and a new alternative is proposed. Another unusual aspect of this work is that the model expressions, including the physical properties and their analytical derivatives, were quickly implemented using computer algebra.

  18. Modeling Flash Floods in Small Ungaged Watersheds using Embedded GIS

    OpenAIRE

    Knocke, Ethan William

    2006-01-01

    Effective prediction of localized flash flood regions for an approaching rainfall event requires an in-depth knowledge of the land surface and stream characteristics of the forecast area. Flash Flood Guidance (FFG) is currently formulated once or twice a day at the county level by River Forecast Centers (RFC) in the U.S. using modeling systems that contain coarse, generalized land and stream characteristics and hydrologic runoff techniques that often are not calibrated for the forecast regio...

  19. Tutorial Pengenalan Adobe Photoshop Menggunakan Adobe Flash CS3

    OpenAIRE

    Mayoka, Rio

    2011-01-01

    Kajian ini bertujuan untuk membangun sebuah aplikasi yang dapat menjadi alat bantu dalam pembelajaran Adobe Photoshop, dimana terdapat beberapa materi pengenalan dasar Adobe Photoshop. Aplikasi ini suatu gagasan dengan membuat tutorial beranimasi yang interatif. Aplikasi ini dibuat dengan menggunakan Adobe Flash CS3 dan dapat dijalankan dengan Flash player. Aplikasi ini dapat membantu para penggunanya dalam memahami pengenalan Adobe Photoshop, terutama pengenalan tool pada Adob...

  20. Neural Coding of Green Flash in Retinal Bipolar Pathways

    OpenAIRE

    Caiping Hu

    2012-01-01

    What visual information do the graded potentials among retinal bipolar pathways actually transmit from photoreceptors to ganglion cells? The answer does not exist. Even the graded electric signals have not been understood completely. Here, this paper tries to analyze the encoding mechanisms of graded signals among the parallel bipolar pathways in response to brief green flash. The typical ON, OFF and ON-OFF bipolar cells simultaneously abstracted vectors from green flash stimulus with sine-li...

  1. Flash (Ultra-Rapid) Spark-Plasma Sintering of Silicon Carbide

    OpenAIRE

    Eugene A. Olevsky; Stephen M. Rolfing; Maximenko, Andrey L.

    2016-01-01

    A new ultra-rapid process of flash spark plasma sintering is developed. The idea of flash spark plasma sintering (or flash hot pressing - FHP) stems from the conducted theoretical analysis of the role of thermal runaway phenomena for material processing by flash sintering. The major purpose of the present study is to theoretically analyze the thermal runaway nature of flash sintering and to experimentally address the challenge of uncontrollable thermal conditions by the stabilization of the f...

  2. Implementation of time-resolved step-scan fourier transform infrared (FT-IR) spectroscopy using a kHz repetition rate pump laser.

    Science.gov (United States)

    Magana, Donny; Parul, Dzmitry; Dyer, R Brian; Shreve, Andrew P

    2011-05-01

    Time-resolved step-scan Fourier transform infrared (FT-IR) spectroscopy has been shown to be invaluable for studying excited-state structures and dynamics in both biological and inorganic systems. Despite the established utility of this method, technical challenges continue to limit the data quality and more wide ranging applications. A critical problem has been the low laser repetition rate and interferometer stepping rate (both are typically 10 Hz) used for data acquisition. Here we demonstrate significant improvement in the quality of time-resolved spectra through the use of a kHz repetition rate laser to achieve kHz excitation and data collection rates while stepping the spectrometer at 200 Hz. We have studied the metal-to-ligand charge transfer excited state of Ru(bipyridine)(3)Cl(2) in deuterated acetonitrile to test and optimize high repetition rate data collection. Comparison of different interferometer stepping rates reveals an optimum rate of 200 Hz due to minimization of long-term baseline drift. With the improved collection efficiency and signal-to-noise ratio, better assignments of the MLCT excited-state bands can be made. Using optimized parameters, carbonmonoxy myoglobin in deuterated buffer is also studied by observing the infrared signatures of carbon monoxide photolysis upon excitation of the heme. We conclude from these studies that a substantial increase in performance of ss-FT-IR instrumentation is achieved by coupling commercial infrared benches with kHz repetition rate lasers.

  3. Coherence measurements and coherent diffractive imaging at FLASH

    Energy Technology Data Exchange (ETDEWEB)

    Vartanyants, I A; Mancuso, A P; Singer, A; Yefanov, O M; Gulden, J, E-mail: ivan.vartaniants@desy.d [Deutsches Elektronen-Synchrotron DESY, Notkestrasse 85, D-22607 Hamburg (Germany)

    2010-10-14

    We present an overview of recent experiments performed at the free-electron laser (FEL) FLASH at DESY in Hamburg. Experiments were focused on coherence measurements and coherent x-ray diffractive imaging (CXDI) of periodic and non-periodic biological samples. Young's double slit experiment was performed at FLASH to measure its coherence properties at a fundamental wavelength of 13.7 nm. Additionally, a uniformly redundant array was used to measure the coherence properties of the third harmonic (2.7 nm) of an 8 nm fundamental wavelength at FLASH. Coherent imaging of a two-dimensional (2D) finite crystal structure using a single pulse train of FLASH radiation was demonstrated. We show that the structure is reconstructed to the detector-limited resolution of 220 nm, given an adequate signal to noise ratio. We have also employed CXDI in a non-destructive regime to compare the images of a biological sample using single, femtosecond pulses of FLASH radiation. We have verified that images reconstructed using CXDI are similar for statistically different FEL pulses. We have also demonstrated Fourier transform holography of the same biological sample and present diffraction data measured at the third harmonic of FLASH, reaching into the water window.

  4. Flash floods in the Tatra Mountain streams: frequency and triggers.

    Science.gov (United States)

    Ballesteros-Cánovas, J A; Czajka, B; Janecka, K; Lempa, M; Kaczka, R J; Stoffel, M

    2015-04-01

    Flash floods represent a frequently recurring natural phenomenon in the Tatra Mountains. On the northern slopes of the mountain chain, located in Poland, ongoing and expected future changes in climate are thought to further increase the adverse impacts of flash floods. Despite the repeat occurrence of major floods in the densely populated foothills of the Polish Tatras, the headwaters have been characterized by a surprising lack of data, such that any analysis of process variability or hydrometeorological triggers has been largely hampered so far. In this study, dendrogeomorphic techniques have been employed in four poorly-gauged torrential streams of the northern slope of the Tatra Mountains to reconstruct temporal and spatial patterns of past events. Using more than 1100 increment cores of trees injured by past flash floods, we reconstruct 47 events covering the last 148 years and discuss synoptic situations leading to the triggering of flash floods with the existing meteorological and flow gauge data. Tree-ring analyses have allowed highlighting the seasonality of events, providing new insights about potential hydrometeorological triggers as well as a differentiating flash flood activity between catchments. Results of this study could be useful to design future strategies to deal with flash flood risks at the foothills of the Polish Tatras and in the Vistula River catchment.

  5. Establishment of the NIST flashing-light photometric unit

    Science.gov (United States)

    Ohno, Yoshihiro; Zong, Yuqin

    1997-09-01

    There is a need for accurate measurement of flashing lights for the proper maintenance of aircraft anticollision lights. A large variation in the measured intensities of anticollision lights has been a problem, and thus, NIST has undertaken the task to establish flashing-light photometric standards to provide calibration services in this area. A flashing-light photometric unit [lux second, (lx (DOT) s)] has been realized based on the NIST detector-based candela, using four standard photometers equipped with current integrators. Two different approaches have been taken to calibrate these standard photometers: one based on electrical calibration of the current integrator, and the other based on electronic pulsing of a steady-state photometric standard. The units realized using these two independent methods agreed to within 0.2%. The relative expanded uncertainty (k equals 2) of the standard photometers, in the measurement of the white xenon flash, is estimated to be 0.6%. The standard photometers are characterized for temporal response, linearity, and spectral responsivity, to be used for measurement of xenon flash sources of various waveforms and colors. Calibration services have been established at NIST for flashing-light photometers with white and red anticollision lights.

  6. Flash light sintering of nickel nanoparticles for printed electronics

    Energy Technology Data Exchange (ETDEWEB)

    Park, Sung-Hyeon [School of Mechanical Engineering, Hanyang University, 17 Haengdang-dong, Seongdong-gu, Seoul 133-791 (Korea, Republic of); Kim, Hak-Sung, E-mail: kima@hanyang.ac.kr [School of Mechanical Engineering, Hanyang University, 17 Haengdang-dong, Seongdong-gu, Seoul 133-791 (Korea, Republic of); Institute of Nano Science and Technology, Hanyang University, Seoul 133-79 (Korea, Republic of)

    2014-01-01

    In this paper, a sintering process for nickel nanoparticles using flash light irradiation was investigated for multilayer ceramic capacitors, magnetic devices and printed electronics. The existence of a small amount of 10 nm size nanoparticles in the ink significantly improved the flash light absorption and induced the melting and sintering of the nanoparticles. Due to this phenomenon, uniform diameter nickel nanoparticles (50 nm) could not be sintered, while the nickel nanoparticles with varying diameters (5–500 nm) were sintered by flash light irradiation. In order to acquire high electrical conductivity in the sintered nickel nanoparticles, several flash light sintering parameters such as light energy and pulsed light patterns were optimized. Also, the nickel nano-ink was optimized by changing the weight fractions of organic binder in the ink. - Highlights: • Nickel nanoparticle was sintered by flash light irradiation technique. • The existence of 10 nm size nanoparticles improved the flash light absorption. • The melting temperature of the 10 nm size nanoparticles is significantly decreased. • The only nickel nanoparticles with varying diameters (5–500 nm) were sintered. • Several sintering parameters were optimized for conductivity of nickel nanoparticle.

  7. Production of bio-oil with flash pyrolysis; Biooeljyn tuotanto flash-pyrolyysillae ja sen poltto

    Energy Technology Data Exchange (ETDEWEB)

    Nyroenen, T. [Vapo Oy, Jyvaeskylae (Finland)

    1997-12-01

    The target of the R and D work is to study the production of bio-oils using Flash-pyrolysis technology and utilisation of the bio-oil in oil-fuelled boilers. The PDU-unit was installed at VTT Energy in Otaniemi in April 1996. The first test were carried out in June. In the whole project Vapo Oy is responsible for: acquiring the 20 kg/h PDU-device for development; follow up of the engine tests; the investment of 5 MW demonstration plant; to carry on the boiler and engine tests with Finnish bio-oils. (orig.)

  8. Flash lidar performance testing: configuration and results

    Science.gov (United States)

    Poberezhskiy, Ilya; Johnson, Andrew; Chang, Daniel; Ek, Eric; Natzic, David; Spiers, Gary; Penniman, Steve; Short, Brad

    2012-06-01

    Future planetary and lunar landers can benefit from a hazard detection (HD) system that employs a lidar to create a highresolution 3D terrain map in the vicinity of the landing site and an onboard computer to process the lidar data and identify the safest landing site within the surveyed area. A divert maneuver would then be executed to land in this safe site. An HD system enables landing in regions with a relatively high hazard abundance that would otherwise be considered unacceptably risky, but are of high interest to the scientific community. A key component of a HD system is a lidar with the ability to generate a 3D terrain image with the required range precision in the prescribed time and fits within the project resource constraints. In this paper, we present the results obtained during performance testing of a prototype "GoldenEye" 3D flash lidar developed by ASC, Inc. The testing was performed at JPL with the lidar and the targets separated by 200 m. The analysis of the lidar performance obtained for different target types and albedos, pulse energies, and fields of view is presented and compared to key HD lidar requirements identified for the Mars 2018 lander.

  9. Studying white dwarf merger remnants with FLASH

    Science.gov (United States)

    Jenks, Malia

    2017-01-01

    There is still uncertainty as to the progenitor systems of type Ia supernova (SN Ia). Both single and double degenerate systems have been suggested as progenitors. In a double degenerate system a merger between the two white dwarfs, with total mass at or exceeding the Chandrasekhar mass, leads to the supernova. If the explosion occurs during the merging process it is a violent merger. If an explosion doesn't occur while the stars merge the system becomes a white dwarf of unstable mass. For mergers of this type with differing starting masses it has been shown that during the viscous evolution carbon burning starts far from the center and stably converts the star to oxygen and neon. In this case the star will eventually collapse to a neutron star and not produce an SN Ia. The case of similar mass mergers has been much less explored. Using the results of a smooth particle hydrodynamic merger we simulate the viscous evolution of models of different mass ratios with FLASH. These simulations test if a similar mass merger can lead to an SN Ia, and begin to probe where the transition from similar to dissimilar mass occurs.

  10. Flash pyrolysis fuel oil: bio-pok

    Energy Technology Data Exchange (ETDEWEB)

    Gust, S. [Neste Oy, Porvoo (Finland)

    1997-12-01

    Samples of flash pyrolysis liquid produced by Union Fenosa, Spain from pine and straw and samples produced by Ensyn of Canada from mixed hardwoods were combusted with simple pressure atomization equipment commonly used with light fuel oils in intermediate size (0.1-1 MW) boilers. With a number of modifications to the combustion system, carbon monoxide (CO) and nitrous oxide (NO{sub x}) could be reduced to acceptable levels: CO < 30 ppm and NO{sub x} < 140 ppm. Particulate emissions which were initially very high (Bacharach 4-5) were reduced (Bach. 2-3) by system improvements but are still higher than from light fuel oil (Bach. <1). The modifications to the combustion system were: refractory section between burner and boiler, acid resistant progressive cavity pump, higher liquid preheat temperature and higher pressure than for light fuel oils. The main problems with pyrolysis liquids concerns their instability or reactivity. At temperatures above 100 deg C they begin to coke, their viscosity increases during storage and oxygen from air causes skin formation. This requires that special handling procedures are developed for fuel storage, delivery and combustion systems. (orig.)

  11. Robust Repetitive Controller for Fast AFM Imaging

    CERN Document Server

    Necipoglu, Serkan; Has, Yunus; Guvenc, Levent; Basdogan, Cagatay

    2012-01-01

    Currently, Atomic Force Microscopy (AFM) is the most preferred Scanning Probe Microscopy (SPM) method due to its numerous advantages. However, increasing the scanning speed and reducing the interaction forces between the probe's tip and the sample surface are still the two main challenges in AFM. To meet these challenges, we take advantage of the fact that the lateral movements performed during an AFM scan is a repetitive motion and propose a Repetitive Controller (RC) for the z-axis movements of the piezo-scanner. The RC utilizes the profile of the previous scan line while scanning the current line to achieve a better scan performance. The results of the scanning experiments performed with our AFM set-up show that the proposed RC significantly outperforms a conventional PI controller that is typically used for the same task. The scan error and the average tapping forces are reduced by 66% and 58%, respectively when the scan speed is increased by 7-fold.

  12. Development of a compact and reliable repetitively pulsed Xe Cl (308 nm) excimer laser

    Indian Academy of Sciences (India)

    N S Benerji; N Varshnay; J K Mittal

    2013-02-01

    Development and operation characteristics of a repetitively pulsed UV spark pre-ionized XeCl(Xenon Chloride) excimer laser is described. The laser uses discharge pumped C–C charge transfer excitation. A compact gas circulation loop was adopted to achieve high repetition rate operation. The laser generates optical pulses of energy 150 mJ at 150 Hz reliably. The electrical to optical conversion efficiency obtained is 1%. The laser pulse duration is ∼8 nS (FWHM). The single fill gas lifetime have been found to be 2 × 106 shots for 20% reduction of energy without any halogen injection. The system is compact and reliable.

  13. High average power coherent vuv generation at 10 MHz repetition frequency by intracavity high harmonic generation.

    Science.gov (United States)

    Ozawa, Akira; Zhao, Zhigang; Kuwata-Gonokami, Makoto; Kobayashi, Yohei

    2015-06-15

    Intracavity high harmonic generation was utilized to generate high average-power coherent radiation at vacuum ultraviolet (vuv) wavelengths. A ytterbium-doped fiber-laser based master-oscillator power-amplifier (MOPA) system with a 10 MHz repetition frequency was developed and used as a driving laser for an external cavity. A series of odd-order harmonic radiations was generated extending down to ∼ 30 nm (41 eV in photon energy). The 7th harmonic radiation generated was centered at 149 nm and had an average output power of up to 0.5 mW. In this way, we developed a sub-mW coherent vuv-laser with a 10 MHz repetition frequency, which, if used as an excitation laser source for photo-electron spectroscopy, could improve the signal count-rate without deterioration of the spectral-resolution caused by space-charge effects.

  14. A repetitive elements perspective in Polycomb epigenetics.

    Directory of Open Access Journals (Sweden)

    Valentina eCasa

    2012-10-01

    Full Text Available Repetitive elements comprise over two-thirds of the human genome. For a long time, these elements have received little attention since they were considered non functional. On the contrary, recent evidence indicates that they play central roles in genome integrity, gene expression and disease. Indeed, repeats display meiotic instability associated with disease and are located within common fragile sites, which are hotspots of chromosome rearrangements in tumors. Moreover, a variety of diseases have been associated with aberrant transcription of repetitive elements. Overall this indicates that appropriate regulation of repetitive elements’ activity is fundamental.Polycomb group (PcG proteins are epigenetic regulators that are essential for the normal development of multicellular organisms. Mammalian PcG proteins are involved in fundamental processes, such as cellular memory, cell proliferation, genomic imprinting, X-inactivation, and cancer development. PcG proteins can convey their activity through long-distance interactions also on different chromosomes. This indicates that the 3D organization of PcG proteins contributes significantly to their function. However, it is still unclear how these complex mechanisms are orchestrated and which role PcG proteins play in the multi-level organization of gene regulation. Intriguingly, the greatest proportion of Polycomb-mediated chromatin modifications is located in genomic repeats and it has been suggested that they could provide a binding platform for Polycomb proteins.Here, these lines of evidence are woven together to discuss how repetitive elements could contribute to chromatin organization in the 3D nuclear space.

  15. Emotional arousal enhances word repetition priming

    OpenAIRE

    Thomas, Laura A.; LaBar, Kevin S.

    2005-01-01

    Three experiments were conducted to determine if emotional content increases repetition priming magnitude. In the study phase of Experiment 1, participants rated high-arousing negative (taboo) words and neutral words for concreteness. In the test phase, they made lexical decision judgements for the studied words intermixed with novel words (half taboo, half neutral) and pseudowords. In Experiment 2, low-arousing negative (LAN) words were substituted for the taboo words, and in Experiment 3 al...

  16. The Rhythms of Echo. Variations on Repetition

    Directory of Open Access Journals (Sweden)

    Rosa María Aradra Sánchez

    2015-04-01

    Full Text Available This paper presents a study on the echo as metric and rhetorical procedure. It makes a brief tour through some of the poetic manifestations of echo in the Spanish literary tradition, and a brief tour through the attention that metric theory has paid to this phenomenon. Then it stops at the possibilities that rhetoric offers for its analysis from the generic approach of the discursive repetition phenomena.

  17. Soft x-ray laser spectroscopy on trapped highly charged ions at FLASH.

    Science.gov (United States)

    Epp, S W; López-Urrutia, J R Crespo; Brenner, G; Mäckel, V; Mokler, P H; Treusch, R; Kuhlmann, M; Yurkov, M V; Feldhaus, J; Schneider, J R; Wellhöfer, M; Martins, M; Wurth, W; Ullrich, J

    2007-05-04

    In a proof-of-principle experiment, we demonstrate high-resolution resonant laser excitation in the soft x-ray region at 48.6 eV of the 2 (2)S(1/2) to 2 (2)P(1/2) transition of Li-like Fe23+ ions trapped in an electron beam ion trap by using ultrabrilliant light from Free Electron Laser in Hamburg (FLASH). High precision spectroscopic studies of highly charged ions at this and upcoming x-ray lasers with an expected accuracy gain up to a factor of a thousand, become possible with our technique, thus potentially yielding fundamental insights, e.g., into basic aspects of QED.

  18. Repetitive behaviour in autism: Imaging pathways and trajectories

    NARCIS (Netherlands)

    Langen, M.J.G.

    2009-01-01

    Repetitive behaviour in autism: Imaging pathways and trajectories Repetitive and rigid behaviour is one of the core symptoms of autism, a severe and lifelong child psychiatric disorder. Although repetitive behaviour symptoms often form a significant impairment for affected individuals, systematic st

  19. Neural Correlates of Restricted, Repetitive Behaviors in Autism Spectrum Disorders

    Science.gov (United States)

    2014-12-01

    Restrictive Repetitive Behaviors in Autism Spectrum Disorder . Authors: T.Q.Nguyen, B...Manoach. Functional Connectivity of the Dorsal Anterior Cingulate Cortex Predicts Restrictive Repetitive Behaviors in Autism Spectrum Disorder We...Introduction: Although restricted , repetitive behaviors (RRBs) are a highly disabling core feature of Autism Spectrum Disorders (ASDs), they

  20. Lingual Kinematics during Rapid Syllable Repetition in Parkinson's Disease

    Science.gov (United States)

    Wong, Min Ney; Murdoch, Bruce E.; Whelan, Brooke-Mai

    2012-01-01

    Background: Rapid syllable repetition tasks are commonly used in the assessment of motor speech disorders. However, little is known about the articulatory kinematics during rapid syllable repetition in individuals with Parkinson's disease (PD). Aims: To investigate and compare lingual kinematics during rapid syllable repetition in dysarthric…

  1. Repetitive Elements in Mycoplasma hyopneumoniae Transcriptional Regulation

    Science.gov (United States)

    Cattani, Amanda Malvessi; Siqueira, Franciele Maboni; Guedes, Rafael Lucas Muniz; Schrank, Irene Silveira

    2016-01-01

    Transcriptional regulation, a multiple-step process, is still poorly understood in the important pig pathogen Mycoplasma hyopneumoniae. Basic motifs like promoters and terminators have already been described, but no other cis-regulatory elements have been found. DNA repeat sequences have been shown to be an interesting potential source of cis-regulatory elements. In this work, a genome-wide search for tandem and palindromic repetitive elements was performed in the intergenic regions of all coding sequences from M. hyopneumoniae strain 7448. Computational analysis demonstrated the presence of 144 tandem repeats and 1,171 palindromic elements. The DNA repeat sequences were distributed within the 5’ upstream regions of 86% of transcriptional units of M. hyopneumoniae strain 7448. Comparative analysis between distinct repetitive sequences found in related mycoplasma genomes demonstrated different percentages of conservation among pathogenic and nonpathogenic strains. qPCR assays revealed differential expression among genes showing variable numbers of repetitive elements. In addition, repeats found in 206 genes already described to be differentially regulated under different culture conditions of M. hyopneumoniae strain 232 showed almost 80% conservation in relation to M. hyopneumoniae strain 7448 repeats. Altogether, these findings suggest a potential regulatory role of tandem and palindromic DNA repeats in the M. hyopneumoniae transcriptional profile. PMID:28005945

  2. Modeling repetitive motions using structured light.

    Science.gov (United States)

    Xu, Yi; Aliaga, Daniel G

    2010-01-01

    Obtaining models of dynamic 3D objects is an important part of content generation for computer graphics. Numerous methods have been extended from static scenarios to model dynamic scenes. If the states or poses of the dynamic object repeat often during a sequence (but not necessarily periodically), we call such a repetitive motion. There are many objects, such as toys, machines, and humans, undergoing repetitive motions. Our key observation is that when a motion-state repeats, we can sample the scene under the same motion state again but using a different set of parameters; thus, providing more information of each motion state. This enables robustly acquiring dense 3D information difficult for objects with repetitive motions using only simple hardware. After the motion sequence, we group temporally disjoint observations of the same motion state together and produce a smooth space-time reconstruction of the scene. Effectively, the dynamic scene modeling problem is converted to a series of static scene reconstructions, which are easier to tackle. The varying sampling parameters can be, for example, structured-light patterns, illumination directions, and viewpoints resulting in different modeling techniques. Based on this observation, we present an image-based motion-state framework and demonstrate our paradigm using either a synchronized or an unsynchronized structured-light acquisition method.

  3. Repetitive element hypermethylation in multiple sclerosis patients.

    Science.gov (United States)

    Neven, K Y; Piola, M; Angelici, L; Cortini, F; Fenoglio, C; Galimberti, D; Pesatori, A C; Scarpini, E; Bollati, V

    2016-06-18

    Multiple sclerosis (MS) is a complex disorder of the central nervous system whose cause is currently unknown. Evidence is increasing that DNA methylation alterations could be involved in inflammatory and neurodegenerative diseases and could contribute to MS pathogenesis. Repetitive elements Alu, LINE-1 and SAT-α, are widely known as estimators of global DNA methylation. We investigated Alu, LINE-1 and SAT-α methylation levels to evaluate their difference in a case-control setup and their role as a marker of disability. We obtained blood samples from 51 MS patients and 137 healthy volunteers matched by gender, age and smoking. Methylation was assessed using bisulfite-PCR-pyrosequencing. For all participants, medical history, physical and neurological examinations and screening laboratory tests were collected. All repetitive elements were hypermethylated in MS patients compared to healthy controls. A lower Expanded Disability Status Scale (EDSS) score was associated with a lower levels of LINE-1 methylation for 'EDSS = 1.0' and '1.5 ≤ EDSS ≤ 2.5' compared to an EDSS higher than 3, while Alu was associated with a higher level of methylation in these groups: 'EDSS = 1.0' and '1.5 ≤ EDSS ≤ 2.5'. MS patients exhibit an hypermethylation in repetitive elements compared to healthy controls. Alu and LINE-1 were associated with degree of EDSS score. Forthcoming studies focusing on epigenetics and the multifactorial pathogenetic mechanism of MS could elucidate these links further.

  4. FRB repetition and non-Poissonian statistics

    CERN Document Server

    Connor, Liam; Oppermann, Niels

    2016-01-01

    We discuss some of the claims that have been made regarding the statistics of fast radio bursts (FRBs). In an earlier paper \\citep{2015arXiv150505535C} we conjectured that flicker noise associated with FRB repetition could show up in non-cataclysmic neutron star emission models, like supergiant pulses. We show how the current limits of repetition would be significantly weakened if their repeat rate really were non-Poissonian and had a pink or red spectrum. Repetition and its statistics have implications for observing strategy, generally favouring shallow wide-field surveys, since in the non-repeating scenario survey depth is unimportant. We also discuss the statistics of the apparent latitudinal dependence of FRBs, and offer a simple method for calculating the significance of this effect. We provide a generalized Bayesian framework for addressing this problem, which allows for direct model comparison. It is shown how the evidence for a steep latitudinal gradient of the FRB rate is less strong than initially s...

  5. "Know What to Do If You Encounter a Flash Flood": Mental Models Analysis for Improving Flash Flood Risk Communication and Public Decision Making.

    Science.gov (United States)

    Lazrus, Heather; Morss, Rebecca E; Demuth, Julie L; Lazo, Jeffrey K; Bostrom, Ann

    2016-02-01

    Understanding how people view flash flood risks can help improve risk communication, ultimately improving outcomes. This article analyzes data from 26 mental models interviews about flash floods with members of the public in Boulder, Colorado, to understand their perspectives on flash flood risks and mitigation. The analysis includes a comparison between public and professional perspectives by referencing a companion mental models study of Boulder-area professionals. A mental models approach can help to diagnose what people already know about flash flood risks and responses, as well as any critical gaps in their knowledge that might be addressed through improved risk communication. A few public interviewees mentioned most of the key concepts discussed by professionals as important for flash flood warning decision making. However, most interviewees exhibited some incomplete understandings and misconceptions about aspects of flash flood development and exposure, effects, or mitigation that may lead to ineffective warning decisions when a flash flood threatens. These include important misunderstandings about the rapid evolution of flash floods, the speed of water in flash floods, the locations and times that pose the greatest flash flood risk in Boulder, the value of situational awareness and environmental cues, and the most appropriate responses when a flash flood threatens. The findings point to recommendations for ways to improve risk communication, over the long term and when an event threatens, to help people quickly recognize and understand threats, obtain needed information, and make informed decisions in complex, rapidly evolving extreme weather events such as flash floods.

  6. Techniques of the FLASH Thin Target Experiment

    Energy Technology Data Exchange (ETDEWEB)

    Abbasi, R.; Abu-Zayyad, T.; Belov, K.; Belz, J.; /Utah U.; Bergman, D.R.; /Rutgers U., Piscataway; Cao, Z.; /Utah U.; Chang, F.-Y.; Chen, C.-C.; Chen, C.-W.; /Taiwan, Natl. Taiwan U.; Chen, P.; /SLAC; Dalton, M.; Fedorova, Y.; /Utah U.; Field, C.; Hast, C.; /SLAC; Huang, M.A.; /Taiwan, Natl. Taiwan U.; Huntemeyer, P.; /Utah U.; Hwang, W.-Y.P.; /Taiwan, Natl. Taiwan U.; Iverson, R.; /SLAC; Jones, B.F.; Jui, C.C.H.; /Utah U.; Lin, G.-L.; /Taiwan, Natl. Taiwan U. /Utah U. /SLAC /Utah U. /Rutgers U., Piscataway /SLAC /Rutgers U., Piscataway

    2007-10-30

    The fluorescence yield in air is reported for wavelength and pressure ranges of interest to ultra-high energy cosmic ray detectors. A 28.5 GeV electron beam was used to excite the fluorescence. Central to the approach was the system calibration, using Rayleigh scattering of a nitrogen laser beam. In atmospheric pressure dry air, at 304 K the yield is 20.8 {+-} 1.6 photons per MeV.

  7. CN rotational excitation

    Science.gov (United States)

    Palazzi, E.; Mandolesi, N.; Crane, Philippe

    1992-10-01

    We report the results of a search for new lines of sight in which to study the CN excitation and a statistical analysis of all the excitation temperatures measured using interstellar CN. This data set strongly confirms that the cosmic background radiation (CBR) is the dominant contributor to the excitation of CN, and demonstrates the homogeneity of the CBR. Thirty-five observations is a sufficiently large sample to look for the presence of systematic effects in the CN excitation. The weighted average of the CN excitation temperatures exceeds the T(CBR) obtained by COBE and the Canadian rocket by 82 +/- 30 mK. With the aim of looking at the origin of this difference, we have considered in detail the known mechanisms that could contribute to exciting the CN molecule. None of the data necessary to quantify these mechanisms are of sufficient quality to provide a clean explanation of the observed difference.

  8. Transcranial magnetic stimulation (TMS)/repetitive TMS in mild cognitive impairment and Alzheimer's disease.

    Science.gov (United States)

    Nardone, R; Tezzon, F; Höller, Y; Golaszewski, S; Trinka, E; Brigo, F

    2014-06-01

    Several Transcranial Magnetic Stimulation (TMS) techniques can be applied to noninvasively measure cortical excitability and brain plasticity in humans. TMS has been used to assess neuroplastic changes in Alzheimer's disease (AD), corroborating findings that cortical physiology is altered in AD due to the underlying neurodegenerative process. In fact, many TMS studies have provided physiological evidence of abnormalities in cortical excitability, connectivity, and plasticity in patients with AD. Moreover, the combination of TMS with other neurophysiological techniques, such as high-density electroencephalography (EEG), makes it possible to study local and network cortical plasticity directly. Interestingly, several TMS studies revealed abnormalities in patients with early AD and even with mild cognitive impairment (MCI), thus enabling early identification of subjects in whom the cholinergic degeneration has occurred. Furthermore, TMS can influence brain function if delivered repetitively; repetitive TMS (rTMS) is capable of modulating cortical excitability and inducing long-lasting neuroplastic changes. Preliminary findings have suggested that rTMS can enhance performances on several cognitive functions impaired in AD and MCI. However, further well-controlled studies with appropriate methodology in larger patient cohorts are needed to replicate and extend the initial findings. The purpose of this paper was to provide an updated and comprehensive systematic review of the studies that have employed TMS/rTMS in patients with MCI and AD.

  9. Infrared spectroscopy of excited states and transients in photochemistry

    Science.gov (United States)

    Schaffner, Kurt; Grevels, Friedrich-Wilhelm

    Flash photolysis with time-resolved IR detection is used in investigations of the primary photoreactions of chromium, molybdenum, tungsten, manganese, iron, and osmium carbonyl complexes, and of the ensuing transformations of transient products in room temperature solution. The method bridges the gap to spectral data obtained at low temperatures. It provides information which has previously been inaccessible, such as detailed structural information, and kinetic data in cases where the UV-visible absorptions of the species of interest overlap. Finally, excited-state IR spectroscopy has now become feasible for many organic compounds with the most recent instrumental set-up which reaches a time resolution of ≥ 50 ns.

  10. Studies on the Photodynamic Mechanism of Tetrapyrrole Compounds by Laser Flash Photolysis

    Institute of Scientific and Technical Information of China (English)

    DENG,Kui; CHEN,Zhi-Long; ZHOU,Xing-Ping; WANG,Wen-Feng; YANG,Xiao-Xia; TIAN,Juan

    2008-01-01

    Photodynamic therapy (PDT) is a promising new treatment technique which can potentially destroy unwanted and malignant tissues, such as those of cancer. The photodynamic mechanisms of three tetrapyrrole compounds:Mg-purpurin-18, tetra(meso-chlorophenyl)porphyrin (m-TCPP) and 2,7,12,18-tetramethyl-3,8-di[(1-isobutoxyl)-ethyl]-13,17-bis[3-di(2-chloroethyl)aminopropyl]porphyrin (TDBP) in acetonitrile were investigated by 355 nm laser flash photolysis. It was found that after laser flash photolysis (LFP), the excited states of TDBP and Mg-purpurin-18 could react with O2 and 1O2 was produced, which proved that TDBP and Mg-purpurin-18 took effects through type Ⅱ mechanism in PDT. This suggested that TDBP and Mg-purpurin-18 should be suitable for target tissues containing enough O2. Mg-purpurin-18 has two extra absorptions at 550 and 700 nm, which means it has broad choices of laser wavelength in PDT. It was also found that m-TCPP could be photoionized when excited with 355 nm laser under N2-saturated condition. It could also react with O2 to produce reactive oxygen species such as superoxide and the peroxide anions, but not 1O2. These were known as the Type Ⅰ mechanism. So m-TCPP could be used even at low oxygen concentration or more polar environments with good behavior in PDT. From the above studies on the three different tetrapyrrole compounds it could be concluded that the structure of porphin ring takes a main role in PDT. And there was important impact on the photodynamic mechanism for the functional group directly connecting with porphin ring, while little influence for the functional group indirectly connecting with porphin ring. These will be of great value in the discovery of new PDT drugs.

  11. Excited states 2

    CERN Document Server

    Lim, Edward C

    2013-01-01

    Excited States, Volume 2 is a collection of papers that deals with molecules in the excited states. The book describes the geometries of molecules in the excited electronic states. One paper describes the geometries of a diatomic molecule and of polyatomic molecules; it also discusses the determination of the many excited state geometries of molecules with two, three, or four atoms by techniques similar to diatomic spectroscopy. Another paper introduces an ordered theory related to excitons in pure and mixed molecular crystals. This paper also presents some experimental data such as those invo

  12. Excited states v.6

    CERN Document Server

    Lim, Edward C

    1982-01-01

    Excited States, Volume 6 is a collection of papers that discusses the excited states of molecules. The first paper discusses the linear polyene electronic structure and potential surfaces, considering both the theoretical and experimental approaches in such electronic states. This paper also reviews the theory of electronic structure and cites some experimental techniques on polyene excitations, polyene spectroscopic phenomenology, and those involving higher states of polyenes and their triplet states. Examples of these experimental studies of excited states involve the high-resolution one-pho

  13. Post-event analysis and flash flood hydrology in Slovakia

    Directory of Open Access Journals (Sweden)

    Hlavčová Kamila

    2016-12-01

    Full Text Available This work examines the main features of the flash flood regime in Central Europe as revealed by an analysis of flash floods that have occurred in Slovakia. The work is organized into the following two parts: The first part focuses on estimating the rainfall-runoff relationships for 3 major flash flood events, which were among the most severe events since 1998 and caused a loss of lives and a large amount of damage. The selected flash floods occurred on the 20th of July, 1998, in the Malá Svinka and Dubovický Creek basins; the 24th of July, 2001, at Štrbský Creek; and the 19th of June, 2004, at Turniansky Creek. The analysis aims to assess the flash flood peaks and rainfall-runoff properties by combining post-flood surveys and the application of hydrological and hydraulic post-event analyses. Next, a spatially-distributed hydrological model based on the availability of the raster information of the landscape’s topography, soil and vegetation properties, and rainfall data was used to simulate the runoff. The results from the application of the distributed hydrological model were used to analyse the consistency of the surveyed peak discharges with respect to the estimated rainfall properties and drainage basins. In the second part these data were combined with observations from flash flood events which were observed during the last 100 years and are focused on an analysis of the relationship between the flood peaks and the catchment area. The envelope curve was shown to exhibit a more pronounced decrease with the catchment size with respect to other flash flood relationships found in the Mediterranean region. The differences between the two relationships mainly reflect changes in the coverage of the storm sizes and hydrological characteristics between the two regions.

  14. Atmospheric Rivers, Floods, and Flash Floods in California

    Science.gov (United States)

    Skelly, Klint T.

    Atmospheric Rivers (ARs) are long (>2000 km), narrow (<1000 km) corridors of enhanced vertically integrated water vapor (IWV) and enhanced IWV transport (IVT). The landfall of ARs along the U.S. West Coast have been linked to extreme precipitation and flooding/flash flooding in regions of complex topography. The objective of this study is to investigate the relationship between a 10 water-year (2005-2014) climatology of floods, flash floods, and landfalling ARs. The ARs in this study are defined using IVT following the Rutz et al. (2013) methodology, whereas floods and flash floods are identified by the National Centers for Environmental Information (NCEI) Storm Events Database. The results of this study indicate that landfalling ARs are present on a majority of days that there are floods in northern California. Landfalling ARs are predominantly present on a majority of days that there are flash flood reports during the cold-season (November-March); however, the North American monsoon is present on days that there are flash flood reports during the warm-season (April-October). Two exemplary case studies are provided to illustrate the hydrologic impact of landfalling ARs. The first case study illustrated a flood event that occurred in associated with three landfalling ARs that produced 800 mm in regions over the Russian River watershed in northern California and the second case study illustrated a flash flood event that occurred in association with a landfalling AR that produced ˜225 mm of precipitation in regions over the Santa Ynez xii watershed in which produced a flash flood over the southern portions of Santa Barbara County in southern California.

  15. Emergent structured transition from variation to repetition in a biologically-plausible model of learning in basal ganglia.

    Directory of Open Access Journals (Sweden)

    Ashvin eShah

    2014-02-01

    Full Text Available Often, when animals encounter an unexpected sensory event, they transition from executing a variety of movements to repeating the movement(s that may have caused the event. According to a recent theory of action discovery (Redgrave and Gurney 2006, repetition allows the animal to represent those movements, and the outcome, as an action for later recruitment. The transition from variation to repetition often follows a non-random, structured, pattern. While the structure of the pattern can be explained by sophisticated cognitive mechanisms, simpler mechanisms based on dopaminergic modulation of basal ganglia (BG activity are thought to underlie action discovery (Redgrave and Gurney 2006. In this paper we ask the question: can simple BG-mediated mechanisms account for a structured transition from variation to repetition, or are more sophisticated cognitive mechanisms always necessary?To address this question, we present a computational model of BG-mediated biasing of behavior. In our model, unlike most other models of BG function, the BG biases behaviour through modulation of cortical response to excitation; many possible movements are represented by the cortical area; and excitation to the cortical area is topographically-organized. We subject the model to simple reaching tasks, inspired by behavioral studies, in which a location to which to reach must be selected. Locations within a target area elicit a reinforcement signal. A structured transition from variation to repetition emerges from simple BG-mediated biasing of cortical response to excitation. We show how the structured pattern influences behavior in simple and complicated tasks. We also present analyses that describe the structured transition from variation to repetition due to BG-mediated biasing and from biasing that would be expected from a type of cognitive biasing, allowing us to compare behaviour resulting from these types of biasing and make connections with future behavioural

  16. [Repetitive transcranial magnetic stimulation: A potential therapy for cognitive disorders?

    Science.gov (United States)

    Nouhaud, C; Sherrard, R M; Belmin, J

    2017-03-01

    Considering the limited effectiveness of drugs treatments in cognitive disorders, the emergence of noninvasive techniques to modify brain function is very interesting. Among these techniques, repetitive transcranial magnetic stimulation (rTMS) can modulate cortical excitability and have potential therapeutic effects on cognition and behaviour. These effects are due to physiological modifications in the stimulated cortical tissue and their associated circuits, which depend on the parameters of stimulation. The objective of this article is to specify current knowledge and efficacy of rTMS in cognitive disorders. Previous studies found very encouraging results with significant improvement of higher brain functions. Nevertheless, these few studies have limits: a few patients were enrolled, the lack of control of the mechanisms of action by brain imaging, insufficiently formalized technique and variability of cognitive tests. It is therefore necessary to perform more studies, which identify statistical significant improvement and to specify underlying mechanisms of action and the parameters of use of the rTMS to offer rTMS as a routine therapy for cognitive dysfunction.

  17. fMRI repetition suppression: neuronal adaptation or stimulus expectation?

    Science.gov (United States)

    Larsson, Jonas; Smith, Andrew T

    2012-03-01

    Measurements of repetition suppression with functional magnetic resonance imaging (fMRI adaptation) have been used widely to probe neuronal population response properties in human cerebral cortex. fMRI adaptation techniques assume that fMRI repetition suppression reflects neuronal adaptation, an assumption that has been challenged on the basis of evidence that repetition-related response changes may reflect unrelated factors, such as attention and stimulus expectation. Specifically, Summerfield et al. (Summerfield C, Trittschuh EH, Monti JM, Mesulam MM, Egner T. 2008. Neural repetition suppression reflects fulfilled perceptual expectations. Nat Neurosci. 11:1004-1006) reported that the relative frequency of stimulus repetitions and non-repetitions influenced the magnitude of repetition suppression in the fusiform face area, suggesting that stimulus expectation accounted for most of the effect of repetition. We confirm that stimulus expectation can significantly influence fMRI repetition suppression throughout visual cortex and show that it occurs with long as well as short adaptation durations. However, the effect was attention dependent: When attention was diverted away from the stimuli, the effects of stimulus expectation completely disappeared. Nonetheless, robust and significant repetition suppression was still evident. These results suggest that fMRI repetition suppression reflects a combination of neuronal adaptation and attention-dependent expectation effects that can be experimentally dissociated. This implies that with an appropriate experimental design, fMRI adaptation can provide valid measures of neuronal adaptation and hence response specificity.

  18. Rehabilitation interventions for chronic motor deficits with repetitive transcranial magnetic stimulation.

    Science.gov (United States)

    Paquette, C; Thiel, A

    2012-12-01

    Repetitive transcranial magnetic stimulation (rTMS) is a non-invasive electrophysiological method to modulate cortical excitability. As such, rTMS can be used in conjunction with conventional physiotherapy or occupational therapy to facilitate rehabilitation of motor function in patients with focal brain lesions. This review summarizes the rationale for using rTMS in the rehabilitation of motor deficits as derived from imaging and electrophysiological studies of the human motor system. rTMS methodology and its various stimulation modalities are introduced and current evidence for rTMS as supportive therapy for the rehabilitation of chronic motor deficits is discussed.

  19. Central Flash Analysis of the 29 June 2015 Occultation

    Science.gov (United States)

    Person, Michael J.; Bosh, A. S.; Sickafoose, A. A.; Zuluaga, C. A.; Levine, S. E.; Pasachoff, J. M.; Babcock, B. A.; Dunham, E. W.; McLean, I.; Wolf, J.; Abe, F.; Becklin, E.; Bida, T. A.; Bright, L. P.; Brothers, T. C.; Christie, G.; Collins, P. L.; Durst, R. F.; Gilmore, A. C.; Hamilton, R.; Harris, H. C.; Johnson, C.; Kilmartin, P. M.; Kosiarek, M. R.; Leppik, K.; Logsdon, S. E.; Lucas, R.; Mathers, S.; Morley, C. J. K.; Natusch, T.; Nelson, P.; Ngan, H.; Pfueller, E.; Roeser, H.-P.; Sallum, S.; Savage, M.; Seeger, C. H.; Siu, H.; Stockdale, C.; Suzuki, D.; Thanathibodee, T.; Tilleman, T.; Tristram, P. J.; Van Cleeve, J.; Varughese, C.; Weisenbach, L. W.; Widen, E.; Wiedemann, M.

    2015-11-01

    After an extensive prediction effort, the 29 June 2015 occultation by Pluto was observed from both airborne (Stratospheric Observatory for Infrared Astronomy - SOFIA) and numerous ground-based telescopes (Bosh et al. - this meeting). Real-time prediction updates allowed placement of the SOFIA telescope with its four detectors deep within the central-flash region of the atmospheric occultation. Fortuitously, the Mount John University Observatory (Lake Tekapo, New Zealand) was also within the central-flash region (Pasachoff et al. - this meeting). This happenstance resulted in multiple central-flash detections in several colors from each facility allowing direct comparison of different areas of the central-flash evolute.Here we examine and discuss the central-flash signatures from the highest signal-to-noise light curves from each facility. The relative orientations and asymmetries in the central flashes allow us to use them to tightly constrain the lower atmospheric ellipticity and orientation of likely winds with respect to Pluto’s figure. The ratio of the two separate central flashes is also a strong constraint on the geometric solution for the full occultation data set, and the absolute height of the central flashes with respect to those expected for a clear isothermal atmosphere places constraints on haze densities and thermal gradients in Pluto’s lower atmosphere. We can also compare the central-flash signatures in several colors (similar to Sickafoose et. al - this meeting) to establish bounds on haze-particle sizes in the lower atmosphere.SOFIA is jointly operated by the Universities Space Research Association, Inc. (USRA), under NASA contract NAS2-97001, and the Deutsches SOFIA Institut (DSI) under DLR contract 50 OK 0901 to the University of Stuttgart. Support for this work was provided, in part, by NASA grants SSO NNX15AJ82G (Lowell Observatory), PA NNX10AB27G (MIT), and PA NNX12AJ29G (Williams College), as well as the National Research Foundation of

  20. Tunable repetition rate VECSEL for resonant acoustic-excitation of nanostructures

    Science.gov (United States)

    Chen Sverre, T.; Head, C. R.; Turnbull, A. P.; Shaw, E. A.; Tropper, A. C.; Muskens, O. L.

    2016-03-01

    We report a passively mode-locked InGaAs-quantum well VECSEL, emitting a constant pulse train at an average output power of 18 mW and emission wavelength of 1035 nm, with a continuously tunable pulse repetitionfrequency (PRF) between 0.88 - 1.88 GHz. Pulse duration was 230 fs over 80% of that range. Here we propose a technique making use of the demonstrated VECSEL PRF tunability for a resonant frequency-domain pumpprobe spectroscopic technique for acoustic interrogation of nanostructures. Simulation of suitable GHz acoustic resonators to demonstrate this technique is described.

  1. Pulsed laser excitation of phosphate stabilised silver nanoparticles

    Indian Academy of Sciences (India)

    Jyotirmayee Mohanty; Dipak K Palit; Laxminarayan V Shastri; Avinash V Sapre

    2000-02-01

    Laser flash photolysis studies were carried out on two types of silver nanoparticles prepared by -radiolysis of Ag+ solutions in the presence of polyphosphate as the stabiliser. Type I silver nanoparticles displayed a surface plasmon band at 390 nm. Type II silver nanoparticles showed a 390 nm surface plasmon band with a shoulder at 550 nm. On photoexcitation in the surface plasmon band region, using 35 picosecond laser pulses at 355 nm and 532 nm, the type II solutions showed transient bleaching and absorption signals in the 450-900 nm region, which did not decay appreciably up to 5 nanoseconds. These transient changes were found to get annealed in the interval where 5 ns < < 100 ns. Extended photolysis of the nanoparticle solutions with repetitive laser pulses resulted in a decrease in the values of the average particle size which were measured by employing the dynamic light scattering technique.

  2. Multi-Level Bitmap Indexes for Flash Memory Storage

    Energy Technology Data Exchange (ETDEWEB)

    Wu, Kesheng; Madduri, Kamesh; Canon, Shane

    2010-07-23

    Due to their low access latency, high read speed, and power-efficient operation, flash memory storage devices are rapidly emerging as an attractive alternative to traditional magnetic storage devices. However, tests show that the most efficient indexing methods are not able to take advantage of the flash memory storage devices. In this paper, we present a set of multi-level bitmap indexes that can effectively take advantage of flash storage devices. These indexing methods use coarsely binned indexes to answer queries approximately, and then use finely binned indexes to refine the answers. Our new methods read significantly lower volumes of data at the expense of an increased disk access count, thus taking full advantage of the improved read speed and low access latency of flash devices. To demonstrate the advantage of these new indexes, we measure their performance on a number of storage systems using a standard data warehousing benchmark called the Set Query Benchmark. We observe that multi-level strategies on flash drives are up to 3 times faster than traditional indexing strategies on magnetic disk drives.

  3. An Evaluation of Flash Cells Used in Critical Applications

    Science.gov (United States)

    Katz, Richard B.; Flowers, David; Bergevin, Keith

    2016-01-01

    Due to the common use of Flash technology in many commercial and industrial Programmable Logic Devices (PLDs) such as FPGAs and mixed-signal microcontrollers, flash technology is being utilized in fuzed munition applications. This presents a long-term reliability issue for both DoD and NASA safety- and mission-critical applications. A thorough understanding of the data retention failure modes and statistics associated with Flash data retention is of vital concern to the fuze safety community. A key retention parameter for a flash cell is the threshold voltage (VTH), which is an indirect indicator of the amount of charge stored on the cells floating gate. Initial test results based on a study of charge loss in flash cells in an FPGA device is presented. Statistical data taken from a small sample set indicates quantifiable charge loss for devices stored at both room temperature and 150 C. Initial evaluation of the distribution of threshold voltage in a large sample set (800 devices) is presented. The magnitude of charge loss from exposure to electrostatic discharge and electromagnetic fields is measured and presented. Simulated data (and measured data as available) resultant from harsh-environment testing (neutron, heavy ion, EMP) is presented.

  4. Venlafaxine and desvenlafaxine in the management of menopausal hot flashes

    Directory of Open Access Journals (Sweden)

    Johnson ED

    2011-09-01

    Full Text Available Vasomotor flushes are common complaints of women during and after menopause, affecting about 75 percent of this population. Estrogen therapy is the most effective treatment for hot flashes. However, there are a significant number of women who have contraindications or choose not to use estrogen due to potential risks such as breast cancer and thromboembolic disorders. These women need alternative options. The selective norepinephrine reuptake inhibitors, venlafaxine and desvenlafaxine, have shown efficacy in alleviating hot flashes.Objective: The purpose of this review is to assess the efficacy and tolerability of these two agents for treatment of hot flashes in healthy postmenopausal women.Methods: A literature search of the MEDLINE and Ovid databases from inception to June 2011 was conducted. Randomized controlled trials, published in English, with human participants were included. Studies included postmenopausal women, and trials with breast cancer only populations were excluded.Results: Venlafaxine reduced hot flashes by 37 to 61 percent and desvenlafaxine by 55 to 69 percent. Both agents were well tolerated. The most common adverse effects were headache, dry mouth, nausea, insomnia, somnolence, and dizziness.Conclusion: Based on the evidence, venlafaxine and desvenlafaxine are both viable options for reducing the frequency and severity of hot flashes.

  5. Multi-Level Bitmap Indexes for Flash Memory Storage

    Energy Technology Data Exchange (ETDEWEB)

    Wu, Kesheng; Madduri, Kamesh; Canon, Shane

    2010-07-23

    Due to their low access latency, high read speed, and power-efficient operation, flash memory storage devices are rapidly emerging as an attractive alternative to traditional magnetic storage devices. However, tests show that the most efficient indexing methods are not able to take advantage of the flash memory storage devices. In this paper, we present a set of multi-level bitmap indexes that can effectively take advantage of flash storage devices. These indexing methods use coarsely binned indexes to answer queries approximately, and then use finely binned indexes to refine the answers. Our new methods read significantly lower volumes of data at the expense of an increased disk access count, thus taking full advantage of the improved read speed and low access latency of flash devices. To demonstrate the advantage of these new indexes, we measure their performance on a number of storage systems using a standard data warehousing benchmark called the Set Query Benchmark. We observe that multi-level strategies on flash drives are up to 3 times faster than traditional indexing strategies on magnetic disk drives.

  6. X-ray flashes in ROSAT PSPC data

    Energy Technology Data Exchange (ETDEWEB)

    Sun, X.; Li, H.; Fenimore, E.E. [Los Alamos National Lab., NM (United States); Wang, Q.D. [Northwestern Univ., Evanston, IL (United States)

    1998-12-01

    The authors find 24 short (200--2,500s) X-ray flashes from all the ROSAT Position Sensitive Proportional Counter (PSPC) observations above galactic latitude 30 degrees ({approximately} 9.6 Msec) and some observations toward low latitudes ({approximately} 2.4 Msec). The brightest flash is quite extraordinary. Its flux rises from nondetection by a factor of > 200 in less than 100 sec. Its spectrum can be fitted either by a thermal plasma model with kT {ge} 2.4 keV, or by a single power-law with the photon number index of {approx} {minus}1.7. Photon statistics are not sufficient to obtain spectra for other flashes. The flash event fields can vary from optically crowded regions to blank fields. Although eight flashes are found from observations from nearby galaxies, and three of them are within the optical extent of their corresponding galaxies, they could not statistically establish that there are two different populations between nearby galaxies and control fields.

  7. Flash on disk for low-power multimedia computing

    Science.gov (United States)

    Singleton, Leo; Nathuji, Ripal; Schwan, Karsten

    2007-01-01

    Mobile multimedia computers require large amounts of data storage, yet must consume low power in order to prolong battery life. Solid-state storage offers low power consumption, but its capacity is an order of magnitude smaller than the hard disks needed for high-resolution photos and digital video. In order to create a device with the space of a hard drive, yet the low power consumption of solid-state storage, hardware manufacturers have proposed using flash memory as a write buffer on mobile systems. This paper evaluates the power savings of such an approach and also considers other possible flash allocation algorithms, using both hardware- and software-level flash management. Its contributions also include a set of typical multimedia-rich workloads for mobile systems and power models based upon current disk and flash technology. Based on these workloads, we demonstrate an average power savings of 267 mW (53% of disk power) using hardware-only approaches. Next, we propose another algorithm, termed Energy-efficient Virtual Storage using Application-Level Framing (EVS-ALF), which uses both hardware and software for power management. By collecting information from the applications and using this metadata to perform intelligent flash allocation and prefetching, EVS-ALF achieves an average power savings of 307 mW (61%), another 8% improvement over hardware-only techniques.

  8. Environmental Effects on Data Retention in Flash Cells

    Science.gov (United States)

    Katz, Rich; Flowers, David; Bergevin, Keith

    2017-01-01

    Flash technology is being utilized in fuzed munition applications and, based on the development of digital logic devices in the commercial world, usage of flash technology will increase. Antifuse technology, prevalent in non-volatile field programmable gate arrays (FPGAs), will eventually be phased out as new devices have not been developed for approximately a decade. The reliance on flash technology presents a long-term reliability issue for both DoD and NASA safety- and mission-critical applications. A thorough understanding of the data retention failure modes and statistics associated with Flash data retention is of vital concern to the fuze safety community. A key retention parameter for a flash cell is the threshold voltage (VTH), which is an indirect indicator of the amount of charge stored on the cells floating gate. This paper will present the results of our on-going tests: long-term storage at 150 C for a small population of devices, neutron radiation exposure, electrostatic discharge (ESD) testing, and the trends of large populations (over 300 devices for each condition) exposed to three difference temperatures: 25 C, 125 C, and 150 C.

  9. Venlafaxine and desvenlafaxine in the management of menopausal hot flashes

    Science.gov (United States)

    Johnson, Emily D; Carroll, Dana G

    Vasomotor flushes are common complaints of women during and after menopause, affecting about 75 percent of this population. Estrogen therapy is the most effective treatment for hot flashes. However, there are a significant number of women who have contraindications or choose not to use estrogen due to potential risks such as breast cancer and thromboembolic disorders. These women need alternative options. The selective norepinephrine reuptake inhibitors, venlafaxine and desvenlafaxine, have shown efficacy in alleviating hot flashes. Objective The purpose of this review is to assess the efficacy and tolerability of these two agents for treatment of hot flashes in healthy postmenopausal women. Methods A literature search of the MEDLINE and Ovid databases from inception to June 2011 was conducted. Randomized controlled trials, published in English, with human participants were included. Studies included postmenopausal women, and trials with breast cancer only populations were excluded. Results Venlafaxine reduced hot flashes by 37 to 61 percent and desvenlafaxine by 55 to 69 percent. Both agents were well tolerated. The most common adverse effects were headache, dry mouth, nausea, insomnia, somnolence, and dizziness. Conclusions Based on the evidence, venlafaxine and desvenlafaxine are both viable options for reducing the frequency and severity of hot flashes. PMID:24367464

  10. Theoretical investigation of flash vaporisation in a screw expander

    Science.gov (United States)

    Vasuthevan, Hanushan; Brümmer, Andreas

    2017-08-01

    In the present study flash vaporisation of liquid injection in a twin screw expander for a Trilateral Flash Cycle (TFC) is examined theoretically. The TFC process comprises a pressure increase in the working fluid, followed by heating the liquid close to boiling point. The hot liquid is injected into the working chamber of a screw expander. During this process the pressure of the liquid drops below the saturation pressure, while the temperature of the liquid remains virtually constant. Hence the liquid is superheated and in a metastable state. The liquid jet seeks to achieve a stable state in thermodynamic equilibrium and is therefore partially vaporised. This effect is referred to as flash vaporisation. Accordingly, a two-phase mixture, consisting of vapour and liquid, exists in the working chamber. Thermodynamic simulations were carried out using water as the working fluid for representative screw expander geometry. The simulations presented are performed from two different aspects during the filling process of a screw expander. The first case is the vaporisation of the injected liquid in a state of thermodynamic equilibrium, whereby the two-phase mixture is treated entirely as a compressible and homogeneous gas. The second case considers flashing efficiency. It describes the quantity of flashed vapour and consists of a liquid and vapour domain. Both models are compared and analysed with respect to the operational behaviour of a screw expander.

  11. Design of NAND FLASH File System Based on Loss of Balance Algorithm

    Directory of Open Access Journals (Sweden)

    Jinwu Ju

    2011-02-01

    Full Text Available NAND FLASH is a commonly large capacity memory, which used in embedded systems .It often used to store the operating system kernel and file system. NAND FLASH memory has a limited number of block erase feature. Built file system in NAND FLASH, loss of balance method should be adopted. A balanced system of block erase operation, can extend the life of NAND FLASH and improve overall system reliability. The paper analyzes the characteristics of NAND FLASH work .presents a loss of balance algorithm which used in NAND FLASH memory , and given out the implementation of the algorithm design method.

  12. The Essential Guide to Flash CS4 with ActionScript

    CERN Document Server

    Milbourne, P

    2009-01-01

    For any professional designer or developer working in the world of web technologies or multimedia, Flash is the must-have application, and knowing how to use it effectively is vital. Add in ActionScript 3.0, and Flash becomes an even more powerful tool for the development of high-performance web applications. The Essential Guide to Flash CS4 with ActionScript introduces and explores the possibilities available to you through using Flash CS4. You will learn the aspects basics of Flash's working environment and, using a step-by-step approach, work through the features of Flash and ActionScript n

  13. Storytelling and Repetitive Narratives for Design Empathy

    DEFF Research Database (Denmark)

    Fritsch, Jonas; Judice, Andrea; Soini, Katja

    2007-01-01

    Today it is widely established in design research that empathy is an important part of creating a true understanding of user experience as a resource for design. A typical challenge is how to transmit the feeling of empathy acquired by user studies to designers who have not participated in the user...... study. In this paper, we show how we attained an empathic understanding through storytelling and aroused empathy to others using repetitive narratives in an experimental presentation bringing forth factual, reflective and experiential aspects of the user information. Taking as a starting point our...... experiences with the design project Suomenlinna Seclusive, we conclude with the potential of using narratives for invoking design empathy....

  14. A miniature high repetition rate shock tube.

    Science.gov (United States)

    Tranter, R S; Lynch, P T

    2013-09-01

    A miniature high repetition rate shock tube with excellent reproducibility has been constructed to facilitate high temperature, high pressure, gas phase experiments at facilities such as synchrotron light sources where space is limited and many experiments need to be averaged to obtain adequate signal levels. The shock tube is designed to generate reaction conditions of T > 600 K, P shock waves with predictable characteristics are created, repeatably. Two synchrotron-based experiments using this apparatus are also briefly described here, demonstrating the potential of the shock tube for research at synchrotron light sources.

  15. Storytelling and Repetitive Narratives for Design Empathy

    DEFF Research Database (Denmark)

    Fritsch, Jonas; Judice, Andrea; Soini, Katja

    2007-01-01

    Today it is widely established in design research that empathy is an important part of creating a true understanding of user experience as a resource for design. A typical challenge is how to transmit the feeling of empathy acquired by user studies to designers who have not participated in the user...... study. In this paper, we show how we attained an empathic understanding through storytelling and aroused empathy to others using repetitive narratives in an experimental presentation bringing forth factual, reflective and experiential aspects of the user information. Taking as a starting point our...... experiences with the design project Suomenlinna Seclusive, we conclude with the potential of using narratives for invoking design empathy....

  16. The repetitive component of the sunflower genome

    Directory of Open Access Journals (Sweden)

    T. Giordani

    2014-08-01

    Full Text Available The sunflower (Helianthus annuus and species belonging to the genus Helianthus are emerging as a model species and genus for a number of studies on genome evolution. In this review, we report on the repetitive component of the H. annuus genome at the biochemical, molecular, cytological, and genomic levels. Recent work on sunflower genome composition is described, with emphasis on different types of repeat sequences, especially LTR-retrotransposons, of which we report on isolation, characterisation, cytological localisation, transcription, dynamics of proliferation, and comparative analyses within the genus Helianthus.

  17. Modular, Microprocessor-Controlled Flash Lighting System

    Science.gov (United States)

    Kiefer, Dwayne; Gray, Elizabeth; Skupinski, Robert; Stachowicz, Arthur; Birchenough, William

    2006-01-01

    A microprocessor-controlled lighting system generates brief, precisely timed, high-intensity flashes of light for scientific imaging at frame rates up to about 1 kHz. The system includes an array of light-emitting diodes (LEDs) that are driven in synchronism with an externally generated timing signal (for example, a timing signal generated by a video camera). The light output can be varied in peak intensity, pulse duration, pulse delay, and pulse rate, all depending on the timing signal and associated externally generated control signals. The array of LEDs comprises as many as 16 LED panels that can be attached together. Each LED panel is a module consisting of a rectangular subarray of 10 by 20 LEDs of advanced design on a printed-circuit board in a mounting frame with a power/control connector. The LED panels are controlled by an LED control module that contains an AC-to-DC power supply, a control board, and 8 LED-panel driver boards. In prior LED panels, the LEDs are packaged at less than maximum areal densities in bulky metal housings that reduce effective active areas. In contrast, in the present LED panels, the LEDs are packed at maximum areal density so as to afford 100-percent active area and so that when panels are joined side by side to form the array, there are no visible seams between them and the proportion of active area is still 100 percent. Each panel produces an illuminance of .5 x 10( exp 4) lux at a distance of 5.8 in. (approx.1.6 cm). The LEDs are driven according to a pulse-width-modulation control scheme that makes it safe to drive the LEDs beyond their rated steady-state currents in order to generate additional light during short periods. The drive current and the pulse-width modulation for each LED panel can be controlled independently of those of the other 15 panels. The maximum allowable duration of each pulse of drive current is a function of the amount of overdrive, the total time to be spent in overdrive operation, and the limitations

  18. Research on fission fragment excitation of gases and nuclear pumping of lasers

    Science.gov (United States)

    Schneider, R. T.; Davie, R. N.; Davis, J. F.; Fuller, J. L.; Paternoster, R. R.; Shipman, G. R.; Sterritt, D. E.; Helmick, H. H.

    1974-01-01

    Experimental investigations of fission fragment excited gases are reported along with a theoretical analysis of population inversions in fission fragment excited helium. Other studies reported include: nuclear augmentation of gas lasers, direct nuclear pumping of a helium-xenon laser, measurements of a repetitively pulsed high-power CO2 laser, thermodynamic properties of UF6 and UF6/He mixtures, and nuclear waste disposal utilizing a gaseous core reactor.

  19. Model of UV flashes due to gigantic blue jets

    Energy Technology Data Exchange (ETDEWEB)

    Milikh, G M [University of Maryland, College Park, MD, 20742 (United States); Shneider, M N [Princeton University, Princeton, NJ (United States)], E-mail: milikh@astro.umd.edu, E-mail: shneyder@princeton.edu

    2008-12-07

    Analysis of UV flashes observed by the UV detector on board the 'Tatiana' microsatellite suggests, based on their location, pulse width and energy of the source of the photons, that the flashes were generated by gigantic blue jets (GBJs). Presented in this paper is a numerical model of UV flashes due to a bunch of long streamers which form a leader, a prong such as that observed in a GBJ. Using a previously developed model of upward propagation of a long streamer in the exponential atmosphere the paper describes temporal evolution of the UV flux generated by a bunch of long streamers, in the given spectral range 300-400 nm used by the UV detector on board 'Tatiana'. The model is in agreement with the observations.0.

  20. Post-irradiation flashes and continuous emission from solid deuterium

    Energy Technology Data Exchange (ETDEWEB)

    Forrest, J.A.; Brooks, R.L. [Guelph-Waterloo Program for Graduate Work in Physics, University of Guelph, Guelph, Ontario, N1G2W1 (CANADA)

    1997-01-01

    Optical emission from proton-beam-irradiated solid deuterium near 800 nm has been studied after termination of the proton beam. The continuous red emission shows a residual intensity that persists over 30 min from termination of the beam. Optical flashes can also be thermally triggered over 10 min after termination of irradiation. Such triggered flashes are shown to quench the infrared absorption of Stark-shifted charge-induced features. Ultraviolet photons can stimulate this red emission after termination of irradiation with no measurable decrease in intensity for 40 min. The cause of this continuous emission and optical flashes is discussed in the light of these results. {copyright} {ital 1997} {ital The American Physical Society}

  1. DERIVING FLASH FLOODS IN THE CASE OF SIMULATED PRECIPITATIONS

    Directory of Open Access Journals (Sweden)

    GYŐRI MARIA-MIHAELA

    2013-01-01

    Full Text Available Deriving flash floods in the case of simulated precipitations. The present study sets to determine the historical flash-floods on the Petriș watershed making use of the implemented mathematical models in a Hydrological Modeling System. In order to simulate the 1%, 2% and 10% exceedance probability flash-floods, the Intensity-Frequency-Duration (IDF curves have been built on the basis of 22 years of precipitation records (1988-2009. They serve as input data together with the hydrological parameters identified by the means of a Geographic Information Systems. The results, computed mainly on the basis of the Soil Conservation Service (SCS method, consist of hyetographs and hydrographs at the outlet of the main watershed, as well as to that of the ungauged tributaries of the Petriș River.

  2. X-ray Flashes from Off-axis Nonuniform Jets

    Institute of Scientific and Technical Information of China (English)

    Zhi-Ping Jin; Da-Ming Wei

    2004-01-01

    It has been widely believed that the outflows in gamma-ray bursts are jetted and some jets may have structures like ∈(θ) ∝θ-κ. We check the possibility that X-ray flashes come from such jets. Both qualitative and quantitative analyses have shown that this model can reproduce most of the observational features of both X-ray flashes and gamma-ray bursts. Using the usual parameters of gamma-ray bursts, we have carried out numerical calculations for both uniform and nonuniform jets, of their fluxes, spectra and peak energies. It seems that nonuniform jets are more appropriate to these observational properties than uniform jets. We have also shown that in our model the observational ratio of gamma-ray bursts to X-ray flashes is about a few units.

  3. Storage Management Strategy of Flash-Based Platform

    Institute of Scientific and Technical Information of China (English)

    WANG Taiyong; ZHAO Li; HU Shiguang; WANG Tao

    2009-01-01

    Storage management strategy can be expressed by a file system. Commercial file system for embedded application is generally complicated and resource wasted. In this paper, a specified file system adapted to embedded system with flash-based memory is developed. To guarantee the average usage of flash storage sectors, the strategy of wear leveling and adaptive damage management is introduced, in which a dynamic storage space management mode and the strategy of first in first out (FIFO) are adopted. Moreover, the strategy of redundancy design and fast-calculation and tracing is also adopted to extend the life of kernel sector, which can guarantee the reliable ser-vice of system booting. The practical application in an embedded CNC (computerized numerical control) platform proves that the file system has effective performance. Furthermore, the flash file system can be transplanted to dif-ferent embedded platforms by changing a few bottom hardware parameters with universality.

  4. A simple experiment that demonstrates the ``green flash''

    Science.gov (United States)

    Courtial, Johannes

    2012-11-01

    The green flash occurs when, under certain atmospheric conditions, the top segment of the low sun is visibly green. It is surrounded—in at least a few minds—by an air of mystery. I describe a simple experiment that demonstrates different aspects of the green flash. The experiment uses an odd-shaped, water-filled, fish tank to simulate the refractive properties of the atmosphere; milk powder added to the water mimicks the atmosphere's scattering properties. A circular white-light source is viewed through the fish tank and the combination of refraction and scattering makes one end of the light source look green. The setup also allows experimentation with mirage effects, thereby drawing attention to their often neglected contribution to the green flash.

  5. Photoinduced charge injection from excited triplet hypocrellin B into TiO2 colloid in ethanol

    Institute of Scientific and Technical Information of China (English)

    SHEN, Jian-Quan; SHEN, Tao; ZHANG, Man-Hua; LI, Wen; SONG, Ai-Min

    2000-01-01

    Photosensitization of TiO2 colloid by hypocrellin B (HB), a natural photodynamic pigment with extremely high plhotosta bility, has been studied by surface enhanced Raman spec troscorpy (SERS), laser flash photolysis and electron param agnetic resonance (EPR) techniques. The photosensitization of TiO2 occurred practically from the excited triplet dye and the electron injection rate constant is 1.3 × 106 s-1. The influ ences of donor and acceptor on the eleciron injection were in vestigated.

  6. Excited states 4

    CERN Document Server

    Lim, Edward C

    2013-01-01

    Excited States, Volume 4 is a collection of papers that deals with the excited states of molecular activity. One paper investigates the resonance Raman spectroscopy as the key to vibrational-electronic coupling. This paper reviews the basic theory of Raman scattering; it also explains the derivation of the Raman spectra, excitation profiles, and depolarization ratios for simple resonance systems. Another paper reviews the magnetic properties of triplet states, including the zero-field resonance techniques, the high-field experiments, and the spin Hamiltonian. This paper focuses on the magnetic

  7. FlashCam: A fully digital camera for CTA telescopes

    CERN Document Server

    Pühlhofer, G; Biland, A; Florin, D; Föhr, C; Gadola, A; Hermann, G; Kalkuhl, C; Kasperek, J; Kihm, T; Koziol, J; Manalaysay, A; Marszalek, A; Rajda, P J; Schanz, T; Steiner, S; Straumann, U; Tenzer, C; Vogler, P; Vollhardt, A; Weitzel, Q; Winiarski, K; Zietara, K

    2012-01-01

    The future Cherenkov Telescope Array (CTA) will consist of several tens of telescopes of different mirror sizes. CTA will provide next generation sensitivity to very high energy photons from few tens of GeV to >100 TeV. Several focal plane instrumentation options are currently being evaluated inside the CTA consortium. In this paper, the current status of the FlashCam prototyping project is described. FlashCam is based on a fully digital camera readout concept and features a clean separation between photon detector plane and signal digitization/triggering electronics.

  8. Space and terrestrial radiation effects in flash memories

    Science.gov (United States)

    Bagatin, Marta; Gerardin, Simone; Paccagnella, Alessandro

    2017-03-01

    We present a comprehensive review of the effects of ionizing radiation on advanced flash memories. The effects of ionizing radiation as well as the mechanisms underlying the observed phenomena are thoroughly discussed on both floating gate cells and the complex control circuitry. The covered effects are relevant for all floating-gate based flash memories that require very high levels of reliability, from critical applications at the terrestrial level to radiation-harsh environments, such as space, nuclear power plants, and high-energy physics experiments.

  9. Mitochondrial Flashes: Dump Superoxide and Dance with Protons Now.

    Science.gov (United States)

    Demaurex, Nicolas; Schwarzländer, Markus

    2016-09-20

    Transient changes in the physiology of individual mitochondria have recently drawn much interest. The use of a circular permuted yellow fluorescent protein (cpYFP) to monitor mitochondrial flashes and their interpretation as superoxide bursts has added confusion, however. Reviewing mitochondrial flashes in this Forum, Wang et al. again deem cpYFP to be a specific and reversible superoxide indicator, dismissing evidence that purified cpYFP is insensitive to superoxide. This interpretation lacks reproducible evidence and conflicts with the parsimony principle. We offer a constructive, transparent pathway to reach definitive clarification of contradictory reports. Antioxid. Redox Signal. 25, 550-551.

  10. INVESTIGATION OF DIFFERENT MODELS OF COMBINED PARALLEL FLASH BINARY CYCLES

    OpenAIRE

    A. Jafar Yazdi*

    2017-01-01

    The aim of this paper is a comparative study of the different geothermal power plant concepts, based on the energy and exergy analysis. The cycles studied in this paper are the combination of single and double flash power plants with two different ORC cycles as basic Organic Rankine Cycle (ORC), ORC with IHE, regenerative ORC and regenerative ORC with an IHE. The main gain due to using combined flash-binary power plants with various types of ORCs is to achieve optimum and efficient energy uti...

  11. Development of Full Automatic Flash Butt Welding with Digital Control

    Institute of Scientific and Technical Information of China (English)

    WANG Rui; SUN Hexu; WANG Hongwen

    2006-01-01

    The hardware and software design of two digital control systems based on 80C196KB MCU for flash butt welder is introduced in this paper. The welding power supply is made of six-phase half-wave rectifier. The welding outer characteristic of welding machine is realized by digital PI algorithm with the voltage close-loop feedback. The flashing curve is finished by electric-hydraulic servo valve .The process control system transfers datum with power supply system by a serial communication interface. The parameters of the control systems are collected by photoelectrical seclusion to avoid the disturbing of the electromagnetism in welding process.

  12. Flash 3D Planetary Entry, Descent and Landing Sensor Hardening Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Advanced Scientific Concepts Inc. (ASC) is a small business that has developed a number of 3D flash LADAR systems. Flash Ladar Video Cameras are 3D video cameras...

  13. Flash 3D Enhancements for Autonomous Precision Landing and Hazard Detection and Avoidance Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Advanced Scientific Concepts, Inc. (ASC) has developed a 128 x 128 frame, 3D Flash LADAR video camera which produces 3-D point clouds at 30 Hz. Flash Ladar Video...

  14. Development of a 3D Flash LADAR Video Camera for Entry, Decent, and Landing Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Advanced Scientific Concepts, Inc. (ASC) has developed a 128 x 128 frame, 3D Flash LADAR video camera which produces 3-D point clouds at 30 Hz. Flash LADAR captures...

  15. Development of a 3D Flash LADAR Video Camera for Entry, Decent and Landing Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Advanced Scientific Concepts, Inc. (ASC) has developed a 128 x 128 frame, 3D Flash LADAR video camera capable of a 30 Hz frame rate. Because Flash LADAR captures an...

  16. 46 CFR 113.25-10 - Emergency red-flashing lights.

    Science.gov (United States)

    2010-10-01

    ... heard over the background noise, there must be a red-flashing light or rotating beacon, in addition to... system. (b) A red-flashing light or rotating beacon must be installed so that it is visible in the...

  17. Development of PIN Diode Detector Arrays for 3D Flash LIDAR Space Applications Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Advanced Scientific Concepts, Inc. (ASC) has developed a number of 3D Flash LIDAR systems. Flash LIDAR sensors are 3D video systems that return range and intensity...

  18. Flash 3D Planetary Entry, Descent and Landing Sensor Hardening Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Advanced Scientific Concepts, Inc. (ASC) has developed a 128 x 128 frame, 3D Flash LADAR video camera which produces 3-D point clouds at 30 Hz. Flash Ladar Video...

  19. Higher order mode spectra and the dependence of localized dipole modes on the transverse beam position in third harmonic superconducting cavities at FLASH

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Pei [Manchester Univ. (United Kingdom); Deutsches Elektronen-Synchrotron (DESY), Hamburg (Germany); Baboi, Nicoleta [Deutsches Elektronen-Synchrotron (DESY), Hamburg (Germany); Jones, Roger M. [The Cockcroft Institute, Daresbury (United Kingdom)

    2012-06-15

    An electron beam entering an accelerating cavity excites a wakefield. This wakefield can be decomposed into a series of multi-poles or modes. The dominant component of the transverse wakefield is dipole. This report summarizes the higher order mode (HOM) signals of the third harmonic cavities of FLASH measured at various stages: transmission measurements in the single cavity test stand at Fermilab, at CMTB (Cryo- Module Test Bench) and at FLASH, and beam-excited measurements at FLASH. Modes in the first two dipole bands and the fifth dipole band have been identified using a global Lorentzian fit technique. The beam-pipe modes at approximately 4 GHz and some modes in the fifth dipole band have been observed as localized modes, while the first two dipole bands, containing some strong coupling cavity modes, propagate. This report also presents the dependence of the localized dipole modes on the transverse beam position. Linear dependence for various modes has been observed. This makes them suitable for beam position diagnostics. These modes, together with some propagating, strong coupling modes, have been considered in the design of a dedicated electronics for beam diagnostics with HOMs for the third harmonic cavities.

  20. The role of short-term memory impairment in nonword repetition, real word repetition, and nonword decoding: A case study.

    Science.gov (United States)

    Peter, Beate

    2017-09-21

    In a companion study, adults with dyslexia and adults with a probable history of childhood apraxia of speech showed evidence of difficulty with processing sequential information during nonword repetition, multisyllabic real word repetition and nonword decoding. Results suggested that some errors arose in visual encoding during nonword reading, all levels of processing but especially short-term memory storage/retrieval during nonword repetition, and motor planning and programming during complex real word repetition. To further investigate the role of short-term memory, a participant with short-term memory impairment (MI) was recruited. MI was confirmed with poor performance during a sentence repetition and three nonword repetition tasks, all of which have a high short-term memory load, whereas typical performance was observed during tests of reading, spelling, and static verbal knowledge, all with low short-term memory loads. Experimental results show error-free performance during multisyllabic real word repetition but high counts of sequence errors, especially migrations and assimilations, during nonword repetition, supporting short-term memory as a locus of sequential processing deficit during nonword repetition. Results are also consistent with the hypothesis that during complex real word repetition, short-term memory is bypassed as the word is recognized and retrieved from long-term memory prior to producing the word.

  1. Excitable Scale Free Networks

    CERN Document Server

    Copelli, Mauro

    2007-01-01

    When a simple excitable system is continuously stimulated by a Poissonian external source, the response function (mean activity versus stimulus rate) generally shows a linear saturating shape. This is experimentally verified in some classes of sensory neurons, which accordingly present a small dynamic range (defined as the interval of stimulus intensity which can be appropriately coded by the mean activity of the excitable element), usually about one or two decades only. The brain, on the other hand, can handle a significantly broader range of stimulus intensity, and a collective phenomenon involving the interaction among excitable neurons has been suggested to account for the enhancement of the dynamic range. Since the role of the pattern of such interactions is still unclear, here we investigate the performance of a scale-free (SF) network topology in this dynamic range problem. Specifically, we study the transfer function of disordered SF networks of excitable Greenberg-Hastings cellular automata. We obser...

  2. A phonetic approach to consonant repetition in early words.

    Science.gov (United States)

    Kim, Namhee; Davis, Barbara L

    2015-08-01

    The goal of this study was to evaluate movement-based principles for understanding early speech output patterns. Consonant repetition patterns within children's actual productions of word forms were analyzed using spontaneous speech data from 10 typically developing American-English learning children between 12 and 36 months of age. Place of articulation, word level patterns, and developmental trends in CVC and CVCV repeated word forms were evaluated. Labial and coronal place repetitions dominated. Regressive repetition (e.g., [gag] for "dog") occurred frequently in CVC but not in CVCV word forms. Consonant repetition decreased over time. However, the children produced sound types available reported as being within young children's production system capabilities in consonant repetitions in all time periods. Findings suggest that a movement-based approach can provide a framework for comprehensively characterizing consonant place repetition patterns in early speech development.

  3. Repetition and Reactance in Graham’s "Underneath" Poems

    Directory of Open Access Journals (Sweden)

    Roghayeh Farsi

    2017-09-01

    Full Text Available The present paper gives a detailed analysis and interpretation of 16 poems in Jorie Graham's collection, Swarm (2000, which bear "UNDERNEATH" as their main titles. The poems are marked with different types of repetition such as graphological repetition, word, phrase, and sentential repetition, semantic repetition, and syntactic repetition. The study draws on Lakoff and Johnson's theories on metaphor and Brehm and Brehm’s reactance theory. It is argued "underneath" is a conceptual (orientational metaphor which signifies a state of being limited, lack of control and freedom, and loss of power. The paper investigates the speaker's reactant behavior in "Underneath" poems, seeking a way to restore her lost freedom. Reactance behaviors can be skepticism, inertia, aggression, and resistance. It is concluded despite her thematic inertia, representing her submission to the oppressed state, her stylistic reactance reflected in repetitions, innovations, and disruptive diction stands for her attempts to regain her lost control.

  4. Theoretical investigation on nonlinear optical effects in laser trapping of dielectric nanoparticles with ultrafast pulsed excitation.

    Science.gov (United States)

    Devi, Anita; De, Arijit K

    2016-09-19

    The use of low-power high-repetition-rate ultrafast pulsed excitation in stable optical trapping of dielectric nanoparticles has been demonstrated in the recent past; the high peak power of each pulse leads to instantaneous trapping of a nanoparticle with fast inertial response and the high repetition-rate ensures repetitive trapping by successive pulses However, with such high peak power pulsed excitation under a tight focusing condition, nonlinear optical effects on trapping efficiency also become significant and cannot be ignored. Thus, in addition to the above mentioned repetitive instantaneous trapping, trapping efficiency under pulsed excitation is also influenced by the optical Kerr effect, which we theoretically investigate here. Using dipole approximation we show that with an increase in laser power the radial component of the trapping potential becomes progressively more stable but the axial component is dramatically modulated due to increased Kerr nonlinearity. We justify that the relevant parameter to quantify the trapping efficiency is not the absolute depth of the highly asymmetric axial trapping potential but the height of the potential barrier along the beam propagation direction. We also discuss the optimal excitation parameters leading to the most stable dipole trap. Our results show excellent agreement with previous experiments.

  5. Motor Skill Learning and Corticospinal Excitability

    DEFF Research Database (Denmark)

    Christiansen, Lasse

    Background Motor skill learning (MSL) is the persistent increase in performance of a skill obtained through practice. This process is associated with changes throughout the central nervous system. One of these is a change in corticospinal excitability (CSE) assessable with Transcranial Magnetic...... Stimulation. Prior work has demonstrated such a change to very different extents with and without causally linking it to the improvements in motor performance. Objectives The aim of this PhD project has been to explore the relation between changes in CSE and motor performance over the time course of learning...... a novel visuomotor skill. I hypothesized that changes in CSE accompanying long-term motor practice relate to the process of learning rather than repetitive practice on an acquired skill and investigated this by incrementally increasing task difficulty and thus postponing saturation of learning...

  6. Motor Skill Learning and Corticospinal Excitability

    DEFF Research Database (Denmark)

    Christiansen, Lasse

    Background Motor skill learning (MSL) is the persistent increase in performance of a skill obtained through practice. This process is associated with changes throughout the central nervous system. One of these is a change in corticospinal excitability (CSE) assessable with Transcranial Magnetic...... Stimulation. Prior work has demonstrated such a change to very different extents with and without causally linking it to the improvements in motor performance. Objectives The aim of this PhD project has been to explore the relation between changes in CSE and motor performance over the time course of learning...... a novel visuomotor skill. I hypothesized that changes in CSE accompanying long-term motor practice relate to the process of learning rather than repetitive practice on an acquired skill and investigated this by incrementally increasing task difficulty and thus postponing saturation of learning...

  7. Audition influences color processing in the sound-induced visual flash illusion

    OpenAIRE

    Mishra, Jyoti; Martinez, Antigona; Hillyard, Steven A.

    2013-01-01

    Multisensory interactions can lead to illusory percepts, as exemplified by the sound-induced extra flash illusion (SIFI: Shams et al., 2000, 2002). In this illusion, an audio-visual stimulus sequence consisting of two pulsed sounds and a light flash presented within a 100 ms time window generates the visual percept of two flashes. Here, we used colored visual stimuli to investigate whether concurrent auditory stimuli can affect the perceived features of the illusory flash. Zero, one or two pu...

  8. Two Applications of Flash Dynamic Technology Based on Flash-Website%基于Flash-Website的两个Flash动态技术的应用

    Institute of Scientific and Technical Information of China (English)

    虞智辉

    2010-01-01

    随着Flash-Website技术的发展,Flash与网页的联系越来越紧密.因此,如何合理运用Flash技术为网站服务,就成了摆在网页制作者面前的一道实践题.从制作的实践出发,介绍2种Flash与网页技术相结合的制作技巧.

  9. Hot Flashes and Panic Attacks: A Comparison of Symptomatology, Neurobiology, Treatment, and a Role for Cognition

    Science.gov (United States)

    Hanisch, Laura J.; Hantsoo, Liisa; Freeman, Ellen W.; Sullivan, Gregory M.; Coyne, James C.

    2008-01-01

    Despite decades of research, the causal mechanisms of hot flashes are not adequately understood, and a biopsychosocial perspective on hot flashes remains underdeveloped. This article explores overlooked parallels between hot flashes and panic attacks within 5 areas: course and symptomatology, physiological indicators, neurocircuitry and…

  10. Effect of Escitalopram on Hot Flash Interference: A Randomized, Controlled Trial

    Science.gov (United States)

    Carpenter, Janet S.; Guthrie, Katherine A.; Larson, Joseph C.; Freeman, Ellen W.; Joffe, Hadine; Reed, Susan D.; Ensrud, Kristine E.; LaCroix, Andrea Z.

    2012-01-01

    Objectives To estimate the effect of escitalopram 10–20 mg/day versus placebo for reducing hot flash interference in daily life and understand correlates and predictors of reductions in hot flash interference, a key measure of quality of life. Design Multi-site, randomized, double-blind, placebo-controlled clinical trial. Patients 205 midlife women (46% African-American) who met criteria participated. Setting MsFLASH clinical sites in Boston, Indianapolis, Oakland, and Philadelphia. Intervention After baseline, women were randomized to 1 pill of escitalopram 10 mg/day (n=104) or placebo (n=101) with follow-up at 4- and 8-weeks. At week 4, those not achieving 50% fewer hot flashes were increased to 2 pills daily (20 mg/day or 2 placebo pills). Main outcome measures The Hot Flash Related Daily Interference Scale; Correlates were variables from hot flash diaries; Predictors were baseline demographics, clinical variables, depression, anxiety, sleep quality, and hot flashes. Results Compared to placebo, escitalopram significantly reduced hot flash interference by 6.0 points at week 4 and 3.4 points at week 8 more than placebo (p=0.012). Reductions in hot flash interference correlated with changes in hot flash diary variables. However, baseline variables did not significantly predict reductions in hot flash interference. Conclusions Escitalopram 10–20mg/day for 8 weeks improves women’s quality of life and this benefit did not vary by demographic, clinical, mood, sleep, or hot flash variables. PMID:22480818

  11. FEMA Hazard Mitigation Assistance Repetitive Flood Claims (RFC) Data

    Data.gov (United States)

    Department of Homeland Security — This dataset contains closed and obligated projects funded under the following Hazard Mitigation Assistance (HMA) grant programs: Repetitive Flood Claims (RFC). The...

  12. A review of neuroimaging findings in repetitive brain trauma.

    Science.gov (United States)

    Koerte, Inga K; Lin, Alexander P; Willems, Anna; Muehlmann, Marc; Hufschmidt, Jakob; Coleman, Michael J; Green, Isobel; Liao, Huijun; Tate, David F; Wilde, Elisabeth A; Pasternak, Ofer; Bouix, Sylvain; Rathi, Yogesh; Bigler, Erin D; Stern, Robert A; Shenton, Martha E

    2015-05-01

    Chronic traumatic encephalopathy (CTE) is a neurodegenerative disease confirmed at postmortem. Those at highest risk are professional athletes who participate in contact sports and military personnel who are exposed to repetitive blast events. All neuropathologically confirmed CTE cases, to date, have had a history of repetitive head impacts. This suggests that repetitive head impacts may be necessary for the initiation of the pathogenetic cascade that, in some cases, leads to CTE. Importantly, while all CTE appears to result from repetitive brain trauma, not all repetitive brain trauma results in CTE. Magnetic resonance imaging has great potential for understanding better the underlying mechanisms of repetitive brain trauma. In this review, we provide an overview of advanced imaging techniques currently used to investigate brain anomalies. We also provide an overview of neuroimaging findings in those exposed to repetitive head impacts in the acute/subacute and chronic phase of injury and in more neurodegenerative phases of injury, as well as in military personnel exposed to repetitive head impacts. Finally, we discuss future directions for research that will likely lead to a better understanding of the underlying mechanisms separating those who recover from repetitive brain trauma vs. those who go on to develop CTE.

  13. FEMA Hazard Mitigation Assistance Severe Repetitive Loss (SRL) Data

    Data.gov (United States)

    Department of Homeland Security — This dataset contains closed and obligated projects funded under the following Hazard Mitigation Assistance (HMA) grant programs: Severe Repetitive Loss (SRL). The...

  14. Repetitive control of electrically driven robot manipulators

    Science.gov (United States)

    Fateh, Mohammad Mehdi; Ahsani Tehrani, Hojjat; Karbassi, Seyed Mehdi

    2013-04-01

    This article presents a novel robust discrete repetitive control of electrically driven robot manipulators for tracking of a periodic trajectory. We propose a novel model, which presents the highly non-linear dynamics of robot manipulator in the form of linear discrete-time time-varying system. Based on the proposed model, we develop a two-term control law. The first term is an ordinary time-optimal and minimum-norm (TOMN) control by employing parametric controllers to guarantee stability. The second term is a novel robust control to improve the control performance in the face of uncertainties. The robust control estimates and compensates uncertainties including the parametric uncertainty, unmodelled dynamics and external disturbances. Performance of the proposed method is compared with two discrete methods, namely the TOMN control and an adaptive iterative learning (AIL) control. Simulation results confirm superiority of the proposed method in terms of the convergence speed and precision.

  15. Studies of the uncanny: the repetition factor

    Directory of Open Access Journals (Sweden)

    Julia Teitelroit Martins

    2011-06-01

    Full Text Available Freud’s essay The Uncanny (Das Unheimliche offers many indications for the comprehension of an aesthetics of the uncanny which deserve to be explored. Nonetheless, a concept traverses it from beginning to end: the return – which enables its reading under the light of Beyond the pleasure principle, written along the same span of time. Emphasis is given to the uncanny in the sense of repetition of the different – a paradox in terms, like the strangely familiar uncanny. In order to test the validity of an aesthetic reading under this perspective, follows an analysis of the brief short story “A terceira margem do rio” (“The third margin of the river”, by Guimarães Rosa.

  16. Object color affects identification and repetition priming.

    Science.gov (United States)

    Uttl, Bob; Graf, Peter; Santacruz, Pilar

    2006-10-01

    We investigated the influence of color on the identification of both non-studied and studied objects. Participants studied black and white and color photos of common objects and memory was assessed with an identification test. Consistent with our meta-analysis of prior research, we found that objects were easier to identify from color than from black and white photos. We also found substantial priming in all conditions, and study-to-test changes in an object's color reduced the magnitude of priming. Color-specific priming effects were large for color-complex objects, but minimal for color-simple objects. The pattern and magnitude of priming effects was not influenced either by the extent to which an object always appears in the same color (i.e., whether a color is symptomatic of an object) or by the object's origin (natural versus fabricated). We discuss the implications of our findings for theoretical accounts of object perception and repetition priming.

  17. The Status of the Ultra Fast Flash Observatory - Pathfinder

    DEFF Research Database (Denmark)

    Nam, J. W.; Ahmad, S.; Ahn, K. B.

    2014-01-01

    The Ultra Fast Flash Observatory (UFFO) is a project to study early optical emissions from Gamma Ray Bursts (GRBs). The primary scientific goal of UFFO is to see if GRBs can be calibrated with their rising times, so that they could be used as new standard candles. In order to minimize delay in op...

  18. Measuring and Estimating Normalized Contrast in Infrared Flash Thermography

    Science.gov (United States)

    Koshti, Ajay M.

    2013-01-01

    Infrared flash thermography (IRFT) is used to detect void-like flaws in a test object. The IRFT technique involves heating up the part surface using a flash of flash lamps. The post-flash evolution of the part surface temperature is sensed by an IR camera in terms of pixel intensity of image pixels. The IR technique involves recording of the IR video image data and analysis of the data using the normalized pixel intensity and temperature contrast analysis method for characterization of void-like flaws for depth and width. This work introduces a new definition of the normalized IR pixel intensity contrast and normalized surface temperature contrast. A procedure is provided to compute the pixel intensity contrast from the camera pixel intensity evolution data. The pixel intensity contrast and the corresponding surface temperature contrast differ but are related. This work provides a method to estimate the temperature evolution and the normalized temperature contrast from the measured pixel intensity evolution data and some additional measurements during data acquisition.

  19. A comparison of radiometric calibration techniques for lunar impact flashes

    Science.gov (United States)

    Suggs, R. M.; Ehlert, S. R.; Moser, D. E.

    2017-09-01

    Video observations of lunar impact flashes have been made by a number of researchers since the late 1990's and the problem of determination of the impact energies has been approached in different ways Bellot Rubio et al. (2000a, b), Yanagisawa et al. (2008), Bouley et al. (2012), Suggs et al. (2014), Rembold and Ryan (2015), Ortiz et al. (2015), Madiedo et al. (2015). The wide spectral response of the unfiltered video cameras in use for all published measurements necessitates color correction for the standard filter magnitudes available for the comparison stars but this is not typically considered. In our approach, the published color of the comparison star and an estimate of the color of the impact flash is used to correct it to the chosen filter bandpass. Magnitudes corrected to standard filters are then used to determine the luminous energy in the filter bandpass according to the stellar atmosphere calibrations of Bessell et al. (1998). In this paper we compare the various photometric calibration techniques and calculation of luminous energy (radiometry) of impact flashes. This issue has significant implications for determination of luminous efficiency, predictions of impact crater sizes for observed flashes, and the determination of the flux of meteoroids in the 10 s of grams to kilograms mass range.

  20. Searching for neutrino radio flashes from the Moon with LOFAR

    NARCIS (Netherlands)

    Buitink, Stijn; Corstanje, Arthur; Enriquez, Emilio; Falcke, Heino; Frieswijk, Wilfred; Hörandel, Jörg; Mevius, Maaijke; Nelles, Anna; Thoudam, Satyendra; Schellart, Pim; Scholten, Olaf; ter Veen, Sander; van den Akker, Martin; LOFAR Collaboration, [No Value

    2013-01-01

    Ultra-high-energy neutrinos and cosmic rays produce short radio flashes through the Askaryan effect when they impact on the Moon. Earthbound radio telescopes can search the Lunar surface for these signals. A new generation of lowfrequency, digital radio arrays, spearheaded by LOFAR, will allow for s

  1. FLASH assembly of TALENs for high-throughput genome editing.

    Science.gov (United States)

    Reyon, Deepak; Tsai, Shengdar Q; Khayter, Cyd; Foden, Jennifer A; Sander, Jeffry D; Joung, J Keith

    2012-05-01

    Engineered transcription activator–like effector nucleases (TALENs) have shown promise as facile and broadly applicable genome editing tools. However, no publicly available high-throughput method for constructing TALENs has been published, and large-scale assessments of the success rate and targeting range of the technology remain lacking. Here we describe the fast ligation-based automatable solid-phase high-throughput (FLASH) system, a rapid and cost-effective method for large-scale assembly of TALENs. We tested 48 FLASH-assembled TALEN pairs in a human cell–based EGFP reporter system and found that all 48 possessed efficient gene-modification activities. We also used FLASH to assemble TALENs for 96 endogenous human genes implicated in cancer and/or epigenetic regulation and found that 84 pairs were able to efficiently introduce targeted alterations. Our results establish the robustness of TALEN technology and demonstrate that FLASH facilitates high-throughput genome editing at a scale not currently possible with other genome modification technologies.

  2. Data Acquisition System of FlashADC on GTAF Facility

    Institute of Scientific and Technical Information of China (English)

    ZHANG; Qi-wei; HE; Guo-zhu; HUANG; Xing; RUAN; Xi-chao; ZHOU; Zu-ying; ZHU; Xing-hua

    2013-01-01

    The data acquisition system of GTAF facility bases on the digitizer of FlashADC(DC271A,made by Acqiris Technologies Inc.),which can achieve the acquisition of experimental data and real-time monitoring of on-line measure by the capture of digital full pulse waveform from 40 BaF2 detectors.Fig.1

  3. Novel approach for low-cost muzzle flash detection system

    Science.gov (United States)

    Voskoboinik, Asher

    2008-04-01

    A low-cost muzzle flash detection based on CMOS sensor technology is proposed. This low-cost technology makes it possible to detect various transient events with characteristic times between dozens of microseconds up to dozens of milliseconds while sophisticated algorithms successfully separate them from false alarms by utilizing differences in geometrical characteristics and/or temporal signatures. The proposed system consists of off-the-shelf smart CMOS cameras with built-in signal and image processing capabilities for pre-processing together with allocated memory for storing a buffer of images for further post-processing. Such a sensor does not require sending giant amounts of raw data to a real-time processing unit but provides all calculations in-situ where processing results are the output of the sensor. This patented CMOS muzzle flash detection concept exhibits high-performance detection capability with very low false-alarm rates. It was found that most false-alarms due to sun glints are from sources at distances of 500-700 meters from the sensor and can be distinguished by time examination techniques from muzzle flash signals. This will enable to eliminate up to 80% of falsealarms due to sun specular reflections in the battle field. Additional effort to distinguish sun glints from suspected muzzle flash signal is made by optimization of the spectral band in Near-IR region. The proposed system can be used for muzzle detection of small arms, missiles and rockets and other military applications.

  4. DEVELOPMENT OF PRINCIPLES OF DCNET AND FLASH ENVIRONMENTS INTERACTION

    Directory of Open Access Journals (Sweden)

    A. V. Denisenko

    2016-08-01

    Full Text Available The question of implementation of the interface between the DCNET and Flash media is examined. Usage of the interface-based DCNET environment allows to reduce time and material costs for the development t and study of complicated technological system and to increase functional imaging capabilities compared to ActionScript.

  5. Grass Valley Venom FlashPak录像机

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    Thomson新推出的Grass Valley Venom FIashPak录像机,可配合草谷VIPER Film Stream数字电影摄像机使用。Venom FlashPak是一款灵巧可靠的台式系统,可以记录VIPER摄影机输出的未压缩视频。

  6. High-frequency Trading, Algorithmic Finance, and the Flash Crash

    DEFF Research Database (Denmark)

    Borch, Christian

    2016-01-01

    The Flash Crash of 6 May 2010 has an interesting status in discussions of high-frequency trading, i.e. fully automated, superfast computerized trading: it is invoked both as an important illustration of how this field of algorithmic trading operates and, more often, as an example of how fully aut...

  7. Collecting response times using Amazon Mechanical Turk and Adobe Flash.

    Science.gov (United States)

    Simcox, Travis; Fiez, Julie A

    2014-03-01

    Crowdsourcing systems like Amazon's Mechanical Turk (AMT) allow data to be collected from a large sample of people in a short amount of time. This use has garnered considerable interest from behavioral scientists. So far, most experiments conducted on AMT have focused on survey-type instruments because of difficulties inherent in running many experimental paradigms over the Internet. This study investigated the viability of presenting stimuli and collecting response times using Adobe Flash to run ActionScript 3 code in conjunction with AMT. First, the timing properties of Adobe Flash were investigated using a phototransistor and two desktop computers running under several conditions mimicking those that may be present in research using AMT. This experiment revealed some strengths and weaknesses of the timing capabilities of this method. Next, a flanker task and a lexical decision task implemented in Adobe Flash were administered to participants recruited with AMT. The expected effects in these tasks were replicated. Power analyses were conducted to describe the number of participants needed to replicate these effects. A questionnaire was used to investigate previously undescribed computer use habits of 100 participants on AMT. We conclude that a Flash program in conjunction with AMT can be successfully used for running many experimental paradigms that rely on response times, although experimenters must understand the limitations of the method.

  8. Visual reinforcement audiometry: an Adobe Flash based approach.

    Science.gov (United States)

    Atherton, Steve

    2010-09-01

    Visual Reinforcement Audiometry (VRA) is a key behavioural test for young children. It is central to the diagnosis of hearing-impaired infants (1) . Habituation to the visual reinforcement can give misleading results. Medical Illustration ABM University Health Board has designed a collection of Flash animations to overcome this.

  9. Flash-lamp-pumped picosecond Nd:YAG regenerative amplifier

    Institute of Scientific and Technical Information of China (English)

    Bingyuan Zhang; Gang Li; Meng Chen; Guoju Wang; Yonggang Wang; Xiaoyu Ma

    2005-01-01

    @@ A flash-lamp-pumped Nd:YAG regenerative amplifier has been developed at 1.06 μm, seeded with 10-ps pulses from a diode-end-pumped and mode-locked Nd:YAG oscillator with homemade semiconductor saturable absorber mirror(SESAM).

  10. An empirical explanation of the flash-lag effect.

    Science.gov (United States)

    Wojtach, William T; Sung, Kyongje; Truong, Sandra; Purves, Dale

    2008-10-21

    When a flash of light is presented in physical alignment with a moving object, the flash is perceived to lag behind the position of the object. This phenomenon, known as the flash-lag effect, has been of particular interest to vision scientists because of the challenge it presents to understanding how the visual system generates perceptions of objects in motion. Although various explanations have been offered, the significance of this effect remains a matter of debate. Here, we show that: (i) contrary to previous reports based on limited data, the flash-lag effect is an increasing nonlinear function of image speed; and (ii) this function is accurately predicted by the frequency of occurrence of image speeds generated by the perspective transformation of moving objects. These results support the conclusion that perceptions of the relative position of a moving object are determined by accumulated experience with image speeds, in this way allowing for visual behavior in response to real-world sources whose speeds and positions cannot be perceived directly.

  11. FLASH FLOODS IN THE ILIŞUA BASIN

    Directory of Open Access Journals (Sweden)

    G. HOGNOGI

    2011-03-01

    Full Text Available Flash Floods in the Ilişua Basin. The Ilişua Valley is a right tributary of the Someşu Mare Valley and has its spring in the south-western part of the Tibleş Mountains. It is a perennial river, and its maximum flow sometimes exceeds the national multi-anual average. One manifestation of this high flow is represented by two types of flash floods: the ones caused by heavy rainfall and the ones caused by the both heavy precipitation and the melting of snow. These two types of flash floods have specific characteristics not only in terms of causes but also in the happening, the impact area and the scale or proportions of damage. These features are further explained in the analysis of two flash floods that have taken place on May 12-17, 1970 and June 20-21, 2006. The occurence of these extreme hydrological phenomena in the basin and their impact upon nature, people and infrastructure makes the need of more hydrological survey a fact.

  12. Flash floods, hydro-geomorphic response and risk management

    Science.gov (United States)

    Braud, Isabelle; Borga, Marco; Gourley, Jonathan; Hürlimann, Marcel; Zappa, Massimilano; Gallart, Francesc

    2016-10-01

    Each year, natural disasters are responsible for fatalities and economic losses worldwide with 101 billion USD in economic losses and 7000 fatalities reported for 2014 (SwissRE, 2015). Even if earthquakes are responsible for most of these fatalities, flash floods and landslides are recognized as a significant source of threat to human lives (SwissRE, 2015). Jonkman (2005), in a global assessment of flood-related casualties, showed that flash floods lead to the highest mortality (number of fatalities divided by the number of affected people). They are also often associated with shallow landslides and geomorphic processes that can increase threat to human lives. Analysis of a global data set of fatalities from non-seismically triggered landslides (Petley, 2012) shows that 2620 fatal landslides were recorded worldwide in the period 2004-2010, causing a total of 32,322 recorded fatalities. In addition, heavy precipitation events, at the origin of flash floods and shallow landsliding are expected to increase in the future (e.g. Scoccimarro et al., 2016 for a recent study in Europe). Progress in flash floods and landslides understanding, forecasting and warning is therefore still needed to disentangle the complex interactions between hazards, exposure and vulnerability and to increase resilience (Borga et al., 2014).

  13. Modelling (flash) floods in a Dutch lowland catchment

    NARCIS (Netherlands)

    Brauer, C.C.; Teuling, A.J.; Overeem, A.; Velde, Y. van der; Hazenberg, P.; Warmerdam, P.M.M.; Kloosterman, P.; Uijlenhoet, R.

    2012-01-01

    On 26 August 2010 the eastern part of The Netherlands and the bordering part of Germany were struck by a series of rainfall events.We investigated the unprecedented flash flood triggered by this exceptionally heavy rainfall event (return period > 1000 years) in the 6.5 km2 Hupsel Brook catchment, wh

  14. Ultrafast-Contactless Flash Sintering using Plasma Electrodes

    Science.gov (United States)

    Saunders, Theo; Grasso, Salvatore; Reece, Michael J.

    2016-06-01

    This paper presents a novel derivative of flash sintering, in which contactless flash sintering (CFS) is achieved using plasma electrodes. In this setup, electrical contact with the sample to be sintered is made by two arc plasma electrodes, one on either side, allowing current to pass through the sample. This opens up the possibility of continuous throughput flash sintering. Preheating, a usual precondition for flash sintering, is provided by the arc electrodes which heat the sample to 1400 °C. The best results were produced with pre-compacted samples (bars 1.8 mm thick) of pure B4C (discharge time 2s, current 4A) and SiC:B4C 50 wt% (3s at 6A), which were fully consolidated under a heating rate approaching 20000 °C/min. For the composite a cylindrical volume of 14 mm3 was sintered to full density with limited grain growth.

  15. Monitoring of flash visual evoked potentials during neurosurgical operations.

    Science.gov (United States)

    Cedzich, C; Schramm, J

    1990-01-01

    In summary, our results suggest that flash VEP monitoring is not specific for visual acuity and has not proved helpful as an intraoperative warning system. The future challenge will be to devise a method which activates only those fibers specific to visual acuity and which provides reproducible and reliable information quickly enough that adjustments in patient management can be made.

  16. Recovery of Flash Memories for Reliable Mobile Storages

    Directory of Open Access Journals (Sweden)

    Daesung Moon

    2010-01-01

    Full Text Available As the mobile appliance is applied to many ubiquitous services and the importance of the information stored in it is increased, the security issue to protect the information becomes one of the major concerns. However, most previous researches focused only on the communication security, not the storage security. Especially, a flash memory whose operational characteristics are different from those of HDD is used increasingly as a storage device for the mobile appliance because of its resistance to physical shock and lower power requirement. In this paper, we propose a flash memory management scheme targeted for guaranteeing the data integrity of the mobile storage. By maintaining the old data specified during the recovery window, we can recover the old data when the mobile appliance is attacked. Also, to reduce the storage requirement for the recovery, we restrict the number of versions to be copied, called Degree of Integrity (DoI. Especially, we consider both the reclaim efficiency and the wear leveling which is a unique characteristic of the flash memory. Based on the performance evaluation, we confirm that the proposed scheme can be acceptable to many applications as a flash memory management scheme for improving data integrity.

  17. Implementation of Power Efficient Flash Analogue-to-Digital Converter

    Directory of Open Access Journals (Sweden)

    Taninki Sai Lakshmi

    2014-01-01

    Full Text Available An efficient low power high speed 5-bit 5-GS/s flash analogue-to-digital converter (ADC is proposed in this paper. The designing of a thermometer code to binary code is one of the exacting issues of low power flash ADC. The embodiment consists of two main blocks, a comparator and a digital encoder. To reduce the metastability and the effect of bubble errors, the thermometer code is converted into the gray code and there after translated to binary code through encoder. The proposed encoder is thus implemented by using differential cascade voltage switch logic (DCVSL to maintain high speed and low power dissipation. The proposed 5-bit flash ADC is designed using Cadence 180 nm CMOS technology with a supply rail voltage typically ±0.85 V. The simulation results include a total power dissipation of 46.69 mW, integral nonlinearity (INL value of −0.30 LSB and differential nonlinearity (DNL value of −0.24 LSB, of the flash ADC.

  18. RAFFS: Model Checking a Robust Abstract Flash File Store

    NARCIS (Netherlands)

    Taverne, P.; Pronk, C.

    2009-01-01

    Accepted for publication in the Proceedings of the 11th International Conference on Formal Engineering Methods, ICFEM 2009. This paper presents a case study in modeling and verifying a POSIX-like file store for Flash memory. This work fits in the context of Hoare’s verification challenge and, in pa

  19. Lightning flash density in relation to aerosol over Nanjing (China)

    Science.gov (United States)

    Tan, Y. B.; Peng, L.; Shi, Z.; Chen, H. R.

    2016-06-01

    Time series data of lightning flash density, aerosol optical depth (AOD), surface temperature, convective available potential energy (CAPE) and thunderstorm days for 10 years (2002-2011), cloud-to-ground lightning (CG), and AOD of 5 years for summer season, i.e., June, July, and August over Nanjing, China, have been analyzed, to investigate the impact of aerosols on lightning. The results indicate that the radiative effect of aerosol may be one of the main reason for the decrease of the lightning flash density in a long period, while the aerosol microphysical effect may be a major role in the increase of the percent of + CG flashes (P+ CG). The dependence of surface temperature, CAPE, and thunderstorm days on AOD (R = - 0.748, - 0.741, - 0.744), and the negative correlation (R = - 0.634) between lightning flash density and AOD may lend support for the radiative effect of aerosol on lightning. In addition, elevated aerosols may change the charge distribution in thundercloud, hence enhancing the positive cloud-to-ground lightning (+ CG) activity, as P+ CG is positively correlated with AOD.

  20. Temporal uncertainty separates flashes from their background during saccades

    NARCIS (Netherlands)

    Maij, F.; Brenner, E.M.; Smeets, J.B.J.

    2011-01-01

    It is known that spatial localization of flashed objects fails around the time of rapid eye movements (saccades). This mislocalization is often interpreted in terms of a combination of shifts and deformations of the brain's representation of space to account for the eye movement. Such temporary

  1. Temporal uncertainty separates flashes from their background during saccades.

    NARCIS (Netherlands)

    Maij, F.; Brenner, E.; Smeets, J.B.J.

    2011-01-01

    It is known that spatial localization of flashed objects fails around the time of rapid eye movements (saccades). This mislocalization is often interpreted in terms of a combination of shifts and deformations of the brain’s representation of space to account for the eye movement. Such temporary

  2. Sub-seasonal forecasting of flash droughts in China

    Science.gov (United States)

    Yuan, Xing; Wang, Linying

    2016-04-01

    Short-term droughts during the crop growing seasons sometimes occur with abnormally high temperature, the decreasing soil moisture but increasing evapotranspiration (ET) often intensify the drought conditions. These droughts are recently termed as "flash droughts" due to their rapid development, unusual intensity and devastating impacts. For example, a flash drought that lasted for less than a month during the summer of 2013 affected 13 provinces in southern China and damaged over 2 million hectares of crops in two southern provinces alone. Currently, seasonal forecasting of flash droughts remains a grand challenge because they usually happened without persistent oceanic anomalies while mainly due to the short-term anomalies in the atmospheric circulations and the land surface conditions. Moreover, forecasting of a flash drought event is not only to predict a water deficit, but also to predict a heat extreme (i.e., abnormally high temperature) and the water-energy coupling anomaly between the land and atmosphere (e.g., ET anomaly). On the other hand, sub-seasonal to seasonal (S2S) forecasting that intends to bridge the weather and climate predictions for a seamless climate service is an emerging area and will also be essential for advancing the extended hydrological forecasting. Recently, a number of S2S projects including the second phase of the North American Multimodel Ensemble (NMME) project have been launched to understand the hydro-climate predictability from weeks to a season, and to explore its usefulness for the applications within the Global Framework for Climate Services. Therefore, the emerging S2S forecasting activities provide an unprecedent opportunity for improving the understanding of the predictability of flash drought, and sub-seasonal forecasting of flash drought will in turn be a good measure for assessing the phenomenological forecast skill of the S2S forecasting practices. In this presentation, a 29-year daily NCEP Climate Forecast System

  3. Machine protection for FLASH and the European XFEL

    Energy Technology Data Exchange (ETDEWEB)

    Froehlich, Lars

    2009-05-15

    The Free-Electron Laser in Hamburg (FLASH) and the future European X-Ray Free-Electron Laser (XFEL) are sources of brilliant extremeultraviolet and X-ray radiation pulses. Both facilities are based on superconducting linear accelerators (linacs) that can produce and transport electron beams of high average power. With up to 90 kW or up to 600 kW of power, respectively, these beams hold a serious potential to damage accelerator components. This thesis discusses several passive and active machine protection measures needed to ensure safe operation. At FLASH, dark current from the rf gun electron source has activated several accelerator components to unacceptable radiation levels. Its transport through the linac is investigated with detailed tracking simulations using a parallelized and enhanced version of the tracking code Astra; possible remedies are evaluated. Beam losses can lead to the demagnetization of permanent magnet insertion devices. A number of beam loss scenarios typical for FLASH are investigated with shower simulations. A shielding setup is designed and its efficiency is evaluated. For the design parameters of FLASH, it is concluded that the average relative beam loss in the undulators must be controlled to a level of about 10{sup -8}. FLASH is equipped with an active machine protection system (MPS) comprising more than 80 photomultiplier-based beam loss monitors and several subsystems. The maximum response time to beam losses is less than 4 {mu}s. Setup procedures and calibration algorithms for MPS subsystems and components are introduced and operational problems are addressed. Finally, an architecture for a fully programmable machine protection system for the XFEL is presented. Several options for the topology of this system are reviewed, with the result that an availability goal of at least 0.999 for the MPS is achievable with moderate hardware requirements. (orig.)

  4. Upper limits of flash flood stream power in Europe

    Science.gov (United States)

    Marchi, Lorenzo; Cavalli, Marco; Amponsah, William; Borga, Marco; Crema, Stefano

    2016-11-01

    Flash floods are characterized by strong spatial gradients of rainfall inputs that hit different parts of a river basin with different intensity. Stream power values associated with flash floods therefore show spatial variations that depend on geological controls on channel geometry and sediment characteristics, as well as on the variations of flood intensity: this stresses the need for a field approach that takes into account the variability of the controlling factors. Post-flood assessment of peak discharge after major floods makes it possible to analyse stream power in fluvial systems affected by flash floods. This study analyses the stream power of seven intense (return period of rainfall > 100 years at least in some sectors of the river basin) flash floods that occurred in mountainous basins of central and southern Europe from 2007 to 2014. In most of the analysed cross sections, high values of unit stream power were observed; this is consistent with the high severity of the studied floods. The highest values of cross-sectional stream power and unit stream power usually occur in Mediterranean regions. This is mainly ascribed to the larger peak discharges that characterize flash floods in these regions. The variability of unit stream power with catchment area is clearly nonlinear and has been represented by log-quadratic relations. The values of catchment area at which maximum values of unit stream power occur show relevant differences among the studied floods and are linked to the spatial scale of the events. Values of stream power are generally consistent with observed geomorphic changes in the studied cross sections: bedrock channels show the highest values of unit stream power but no visible erosion, whereas major erosion has been observed in alluvial channels. Exceptions to this general pattern, which mostly occur in semi-alluvial cross sections, urge the recognition of local or event-specific conditions that increase the resistance of channel bed and

  5. Flash flood warning based on fully dynamic hydrology modelling

    Science.gov (United States)

    Pejanovic, Goran; Petkovic, Slavko; Cvetkovic, Bojan; Nickovic, Slobodan

    2016-04-01

    Numerical hydrologic modeling has achieved limited success in the past due to, inter alia, lack of adequate input data. Over the last decade, data availability has improved substantially. For modelling purposes, high-resolution data on topography, river routing, and land cover and soil features have meanwhile become available, as well as the observations such as radar precipitation information. In our study, we have implemented the HYPROM model (Hydrology Prognostic Model) to predict a flash flood event at a smaller-scale basin in Southern Serbia. HYPROM is based on the full set of governing equations for surface hydrological dynamics, in which momentum components, along with the equation of mass continuity, are used as full prognostic equations. HYPROM also includes a river routing module serving as a collector for the extra surface water. Such approach permits appropriate representation of different hydrology scales ranging from flash floods to flows of large and slow river basins. The use of full governing equations, if not appropriately parameterized, may lead to numerical instability systems when the surface water in a model is vanishing. To resolve these modelling problems, an unconditionally stable numerical scheme and a method for height redistribution avoiding shortwave height noise have been developed in HYPROM, which achieve numerical convergence of u, v and h when surface water disappears. We have applied HYPROM, driven by radar-estimated precipitation, to predict flash flooding occurred over smaller and medium-size river basins. Two torrential rainfall cases have been simulated to check the accuracy of the model: the exceptional flooding of May 2014 in Western Serbia, and the convective flash flood of January 2015 in Southern Serbia. The second episode has been successfully predicted by HYPROM in terms of timing and intensity six hours before the event occurred. Such flash flood warning system is in preparation to be operationally implemented in the

  6. Flash chemistry: fast chemical synthesis by using microreactors.

    Science.gov (United States)

    Yoshida, Jun-ichi; Nagaki, Aiichiro; Yamada, Takeshi

    2008-01-01

    This concept article provides a brief outline of the concept of flash chemistry for carrying out extremely fast reactions in organic synthesis by using microreactors. Generation of highly reactive species is one of the key elements of flash chemistry. Another important element of flash chemistry is the control of extremely fast reactions to obtain the desired products selectively. Fast reactions are usually highly exothermic, and heat removal is an important factor in controlling such reactions. Heat transfer occurs very rapidly in microreactors by virtue of a large surface area per unit volume, making precise temperature control possible. Fast reactions often involve highly unstable intermediates, which decompose very quickly, making reaction control difficult. The residence time can be greatly reduced in microreactors, and this feature is quite effective in controlling such reactions. For extremely fast reactions, kinetics often cannot be used because of the lack of homogeneity of the reaction environment when they are conducted in conventional reactors such as flasks. Fast mixing using micromixers solves such problems. The concept of flash chemistry has been successfully applied to various organic reactions including a) highly exothermic reactions that are difficult to control in conventional reactors, b) reactions in which a reactive intermediate easily decomposes in conventional reactors, c) reactions in which undesired byproducts are produced in the subsequent reactions in conventional reactors, and d) reactions whose products easily decompose in conventional reactors. The concept of flash chemistry can be also applied to polymer synthesis. Cationic polymerization can be conducted with an excellent level of molecular-weight control and molecular-weight distribution control.

  7. High energy high repetition-rate thin-disk amplifier for OPCPA pumping

    Energy Technology Data Exchange (ETDEWEB)

    Schulz, Michael

    2013-08-15

    The development of a pump laser system for a high power and high repetition rate optical parametric chirped-pulse amplification (OPCPA) is presented in this thesis. The OPCPA system requires pump pulse energies in the range of tens of millijoules at high repetition rates with sub-picosecond pulse durations. This can be achieved to some extend with Innoslab amplifier technology. However, scaling to higher pulse energies at high repetition rates may be problematic. With the thin-disk amplifier presented in this thesis, output energies of 140 mJ at 100 kHz repetition rate could be achieved in burst-mode operation, which is a world record for this type of laser amplifier. Due to its material and spectral properties, ytterbium doped YAG (Yb:YAG) is used as a gain medium for the high power amplifier stages. The low quantum defect and the comparatively large emission bandwidth makes this material the choice for high power operation and sub-picosecond compressed pulse durations. The output beam profile as well as the shape of the output bursts is ideal to pump an OPCPA system. An OPCPA output energy in the millijoule range with repetition rates of 100 kHz to 1 MHz is needed to generate seed pulses for the FEL and for the application as pump-probe laser at the FEL facility. Since the development of this laser system needs to meet requirements set by the Free-Electron Laser in Hamburg (FLASH), the amplifier is conceived for burst-mode operation. The main requirement is a high intra-burst pulse repetition rate of more than 100 kHz and a uniform pulse train (burst) with equal properties for every pulse. The burst-mode is an operation mode where the laser never reaches a lasing equilibrium, which means that the behavior of the amplifier is similar to a switch-on of the laser system for every burst. This makes the development of the amplifier system difficult. Therefore, an analytical model has been developed to study the amplification process during the burst. This includes the

  8. 因特网移动宽带接入解决方案FLASH-OFDM%FLASH-OFDM--Solution of Internet Mobile Broadband Access

    Institute of Scientific and Technical Information of China (English)

    张磊

    2004-01-01

    从介绍OFDM技术入手,分析了VOFDM、WOFDM和FLASH-OFDM技术的性能特点,接着详细介绍了FLASH-OFDM技术的协议模型及其物理层、数据链路层和网络层,最后展望了FLASH-OFDM技术在未来移动通信系统中的应用.

  9. 340nm UV LED excitation in time-resolved fluorescence system for europium-based immunoassays detection

    DEFF Research Database (Denmark)

    Rodenko, Olga; Fodgaard, Henrik; Tidemand-Lichtenberg, Peter

    2017-01-01

    In immunoassay analyzers for in-vitro diagnostics, Xenon flash lamps have been widely used as excitation light sources. Recent advancements in UV LED technology and its advantages over the flash lamps such as smaller footprint, better wall-plug efficiency, narrow emission spectrum...... by 39% compared to that of the Xenon flash lamp based unit, due to the LEDs narrower emission spectrum and longer pulse width. Key parameters of the LED system are discussed to further optimize the signal-to-noise ratio and signal-to-background, and hence the sensitivity of the instrument......, and no significant afterglow, have made them attractive light sources for gated detection systems. In this paper, we report on the implementation of a 340 nm UV LED based time-resolved fluorescence system based on europium chelate as a fluorescent marker. The system performance was tested with the immunoassay based...

  10. The golden ratio of gait harmony: repetitive proportions of repetitive gait phases.

    Science.gov (United States)

    Iosa, Marco; Fusco, Augusto; Marchetti, Fabio; Morone, Giovanni; Caltagirone, Carlo; Paolucci, Stefano; Peppe, Antonella

    2013-01-01

    In nature, many physical and biological systems have structures showing harmonic properties. Some of them were found related to the irrational number φ known as the golden ratio that has important symmetric and harmonic properties. In this study, the spatiotemporal gait parameters of 25 healthy subjects were analyzed using a stereophotogrammetric system with 25 retroreflective markers located on their skin. The proportions of gait phases were compared with φ, the value of which is about 1.6180. The ratio between the entire gait cycle and stance phase resulted in 1.620 ± 0.058, that between stance and the swing phase was 1.629 ± 0.173, and that between swing and the double support phase was 1.684 ± 0.357. All these ratios did not differ significantly from each other (F = 0.870, P = 0.422, repeated measure analysis of variance) or from φ (P = 0.670, 0.820, 0.422, resp., t-tests). The repetitive gait phases of physiological walking were found in turn in repetitive proportions with each other, revealing an intrinsic harmonic structure. Harmony could be the key for facilitating the control of repetitive walking. Harmony is a powerful unifying factor between seemingly disparate fields of nature, including human gait.

  11. The Golden Ratio of Gait Harmony: Repetitive Proportions of Repetitive Gait Phases

    Directory of Open Access Journals (Sweden)

    Marco Iosa

    2013-01-01

    Full Text Available In nature, many physical and biological systems have structures showing harmonic properties. Some of them were found related to the irrational number known as the golden ratio that has important symmetric and harmonic properties. In this study, the spatiotemporal gait parameters of 25 healthy subjects were analyzed using a stereophotogrammetric system with 25 retroreflective markers located on their skin. The proportions of gait phases were compared with , the value of which is about 1.6180. The ratio between the entire gait cycle and stance phase resulted in 1.620 ± 0.058, that between stance and the swing phase was 1.629 ± 0.173, and that between swing and the double support phase was 1.684 ± 0.357. All these ratios did not differ significantly from each other (, , repeated measure analysis of variance or from (, resp., t-tests. The repetitive gait phases of physiological walking were found in turn in repetitive proportions with each other, revealing an intrinsic harmonic structure. Harmony could be the key for facilitating the control of repetitive walking. Harmony is a powerful unifying factor between seemingly disparate fields of nature, including human gait.

  12. Professional Flash Mobile Development Creating Android and iPhone Applications

    CERN Document Server

    Wagner, Richard

    2010-01-01

    Professional Flash Mobile Development: Creating Android and iPhone ApplicationsEverything Flash developers need to know to create native Android and iPhone appsThis Wrox guide shows Flash developers how to create native applications for Android and iPhone mobile devices using Flash. Packed with practical examples, it shows how to build a variety of apps and integrate them with core mobile services such as Accelerometer, GPS, Photo Library,and more.Offers Flash developers the tools to create apps for the Android and iPhone mobile devicesSho

  13. Exploring the physics of efficient optical trapping of dielectric nanoparticles with ultrafast pulsed excitation.

    Science.gov (United States)

    Roy, Debjit; Goswami, Debabrata; De, Arijit K

    2015-08-10

    Stable optical trapping of dielectric nanoparticles with low power high-repetition-rate ultrafast pulsed excitation has received considerable attention in recent years. However, the exact role of such excitation has been quite illusive so far since, for dielectric micron-sized particles, the trapping efficiency turns out to be similar to that of continuous-wave excitation and independent of pulse chirping. In order to provide a coherent explanation of this apparently puzzling phenomenon, we justify the superior role of high-repetition-rate pulsed excitation in dielectric nanoparticle trapping which is otherwise not possible with continuous-wave excitation at a similar average power level. We quantitatively estimate the optimal combination of pulse peak power and pulse repetition rate leading to a stable trap and discuss the role of inertial response on the dependence of trapping efficiency on pulse width. In addition, we report gradual trapping of individual quantum dots detected by a stepwise rise in a two-photon fluorescence signal from the trapped quantum dots which conclusively proves individual particle trapping.

  14. Iconicity in Discourse: The Case of Repetition in Japanese.

    Science.gov (United States)

    Ishikawa, Minako

    This analysis of repeated utterances in Japanese conversational discourse focuses on repetition as an expression of iconicity. In the analysis of a 30-minute conversation among 4 Japanese speakers, the iconic meanings expressed by both reduplication and conversational repetition are highlighted. The iconicity characteristic of conversational data…

  15. Evidence-Based Behavioral Interventions for Repetitive Behaviors in Autism

    Science.gov (United States)

    Boyd, Brian A.; McDonough, Stephen G.; Bodfish, James W.

    2012-01-01

    Restricted and repetitive behaviors (RRBs) are a core symptom of autism spectrum disorders (ASD). There has been an increased research emphasis on repetitive behaviors; however, this research primarily has focused on phenomenology and mechanisms. Thus, the knowledge base on interventions is lagging behind other areas of research. The literature…

  16. Visual attention to advertising : The impact of motivation and repetition

    NARCIS (Netherlands)

    Pieters, RGM; Rosbergen, E; Hartog, M; Corfman, KP; Lynch, JG

    1996-01-01

    Using eye-tracking data, we examine the impact of motivation and repetition on visual attention to advertisements differing in argument quality. Our analyses indicate that repetition leads to an overall decrease in the amount of attention. However, while at first high motivation subjects attend to t

  17. On the Functions of Lexical Repetition in English Texts

    Institute of Scientific and Technical Information of China (English)

    XIAO Fuliang

    2016-01-01

    Lexical repetition, as a cohesive device of an English text, can help make up a cohesive and coherent text. Therefore, in English textual learning, it is helpful for students to know about different patterns and functions of lexical repetition to improve their English level and ability.

  18. UV excitations of halons

    Science.gov (United States)

    Stojanović, Ljiljana; Alyoubi, Abdulrahman O.; Aziz, Saadullah G.; Hilal, Rifaat H.; Barbatti, Mario

    2016-11-01

    In the present study, we examined the UV excitations of a newly introduced molecular set, Halons-9, composed of nine gaseous halon molecules. The performance of the density functional-based multi-reference configuration interaction method (DFT/MRCI) and time-dependent density functional theory with CAM-B3LYP functional (TD-CAM-B3LYP) in the computation of singlet and triplet excited states of this set was evaluated against coupled-cluster with singles and doubles (CCSD). Excited states up to the corresponding ionization limits, including both localized and delocalized excitations, have been benchmarked. TD-CAM-B3LYP significantly underestimates excitation energies of the higher mixed valence-Rydberg and Rydberg states, with computed mean absolute deviations from the equation of motion (EOM)-CCSD results 1.06 and 0.76 eV, respectively. DFT/MRCI gives a significantly better description of higher excited states, albeit still poor, compared to the TD-CAM-B3LYP. The mean absolute deviations of mixed valence-Rydberg and Rydberg states from the reference EOM-CCSD values are 0.66 and 0.47 eV, respectively. The performance of DFT/MRCI for description of strongly correlated states with valence-Rydberg mixing is still not satisfactory enough. On the other hand, oscillator strengths of most of singlet states obtained with both methods are close to the EOM-CCSD values. The largest deviations, occurring in the case of several high-lying multiconfigurational states, are of an order of magnitude.

  19. Hardness and excitation energy

    Indian Academy of Sciences (India)

    Á Nagy

    2005-09-01

    The concept of the ensemble Kohn-Sham hardness is introduced. It is shown that the first excitation energy can be given by the Kohn-Sham hardness (i.e. the energy difference of the ground-state lowest unoccupied and highest occupied levels) plus an extra term coming from the partial derivative of the ensemble exchange-correlation energy with respect to the weighting factor in the limit → 0. It is proposed that the first excitation energy can be used as a reactivity index instead of the hardness.

  20. Excitations in organic solids

    CERN Document Server

    Agranovich, Vladimir M

    2009-01-01

    During the last decade our expertise in nanotechnology has advanced considerably. The possibility of incorporating in the same nanostructure different organic and inorganic materials has opened up a promising field of research, and has greatly increased the interest in the study of properties of excitations in organic materials. In this book not only the fundamentals of Frenkel exciton and polariton theory are described, but also the electronic excitations and electronic energytransfers in quantum wells, quantum wires and quantum dots, at surfaces, at interfaces, in thin films, in multilayers,

  1. High-speed video and electric field observation of upward flashes in Brazil

    Science.gov (United States)

    Saba, Marcelo M. F.; Schumann, Carina; Ferro, Marco A. S.; Paiva, Amanda R.; Jaques, Robson; Warner, Tom A.

    2015-04-01

    Upward flashes from tall towers in Brazil have been observed since January 2012. They have been responsible for damages on equipment installed nearby tall structures that caused their initiation. Almost all upward flashes were observed with high-speed cameras and electric field sensors; a combination of measurements that provides a very accurate classification and characterization of their properties. Although present during all seasons, upward flashes are predominant during summer. They are almost always initiated by a preceding positive cloud-to-ground flash. This study is based on an up-to-date database of 86 upward flashes observed during the last three years. The main characteristics described in this work are: time interval between triggering event and the upward leader initiation, characteristics of the triggering +CG flashes, upward leader characteristics (polarity, presence of recoil leaders and branching), initial continuous current (duration, presence of pulses and recoil leaders), flash duration and presence of subsequence of return stroke.

  2. Adobe Flash as a medium for online experimentation: a test of reaction time measurement capabilities.

    Science.gov (United States)

    Reimers, Stian; Stewart, Neil

    2007-08-01

    Adobe Flash can be used to run complex psychological experiments over the Web. We examined the reliability of using Flash to measure reaction times (RTs) using a simple binary-choice task implemented both in Flash and in a Linux-based system known to record RTs with millisecond accuracy. Twenty-four participants were tested in the laboratory using both implementations; they also completed the Flash version on computers of their own choice outside the lab. RTs from the trials run on Flash outside the lab were approximately 20 msec slower than those from trials run on Flash in the lab, which in turn were approximately 10 msec slower than RTs from the trials run on the Linux-based system (baseline condition). RT SDs were similar in all conditions, suggesting that although Flash may overestimate RTs slightly, it does not appear to add significant noise to the data recorded.

  3. Excitation Methods for Bridge Structures

    Energy Technology Data Exchange (ETDEWEB)

    Farrar, C.R.; Duffy, T.A.; Cornwell, P.J.; Doebling, S.W.

    1999-02-08

    This paper summarizes the various methods that have been used to excited bridge structures during dynamic testing. The excitation methods fall into the general categories of ambient excitation methods and measured-input excitation methods. During ambient excitation the input to the bridge is not directly measured. In contrast, as the category label implies, measured-input excitations are usually applied at a single location where the force input to the structure can be monitored. Issues associated with using these various types of measurements are discussed along with a general description of the various excitation methods.

  4. Repetitively sampled time-of-flight mass spectrometry for gas-phase kinetics studies

    Science.gov (United States)

    Fockenberg, Christopher; Bernstein, Herbert J.; Hall, Gregory E.; Muckerman, James T.; Preses, Jack M.; Sears, Trevor J.; Weston, Ralph E.

    1999-08-01

    An apparatus has been constructed to study radical-radical reactions in the gas phase. It consists of a tubular quartz reactor in which radicals are produced by flash photolysis using an excimer laser as light source. The composition of the gas mixture is analyzed in situ by photoionizing sampled gases using the vacuum ultraviolet emission of a hollow cathode lamp and subsequent time-of-flight mass spectrometry. A simple arrangement of grids at the entrance to the flight tube is used to interrupt the constant flux of ions by application of a combination of constant and pulsed voltages. Individual mass spectra can be taken at a repetition rate of around 20 kHz following each photolysis event. Signal counts from a specified number of consecutive mass spectra are fed into a 2 GHz multiscaler and accumulated as a sampling-time-indexed series of mass spectra. This allows simultaneous observation of the concentrations of multiple transient or stable species on a millisecond time scale. To achieve a suitable signal-to-noise ratio, signals were typically accumulated over several tens of thousands of laser shots at a pulse rate of 10-15 Hz.

  5. Repetitive DNA Sequences in Wheat and Its Relatives

    Institute of Scientific and Technical Information of China (English)

    ZHANG Xue-yong; LI Da-yong

    2001-01-01

    Repetitive DNA sequences form a large portion of eukaryote genomes. Using wheat ( Triticum )as a model, the classification, features and functions of repetitive DNA sequences in the Tritieeae grass tribe is reviewed as well as the role of these sequences in genome differentiation, control and regulation of homologous chromosome synapsis and pairing. Transposable elements, as an important portion of dispersed repetitives,may play an essential role in gene mutation of the host. Dynamic models for change of copy number and sequences of the repetitive family are also presented after the models of Charlesworth et al. Application of repetitive DNA sequences in the study of evolution, chromosome fingerprinting and marker assisted gene transfer and breeding are described by taking wheat as an example.

  6. Nonword Repetition and Speech Motor Control in Children

    Directory of Open Access Journals (Sweden)

    Christina Reuterskiöld

    2015-01-01

    Full Text Available This study examined how familiarity of word structures influenced articulatory control in children and adolescents during repetition of real words (RWs and nonwords (NWs. A passive reflective marker system was used to track articulator movement. Measures of accuracy were obtained during repetition of RWs and NWs, and kinematic analysis of movement duration and variability was conducted. Participants showed greater consonant and vowel accuracy during RW than NW repetition. Jaw movement duration was longer in NWs compared to RWs across age groups, and younger children produced utterances with longer jaw movement duration compared to older children. Jaw movement variability was consistently greater during repetition of NWs than RWs in both groups of participants. The results indicate that increases in phonological short-term memory demands affect articulator movement. This effect is most pronounced in younger children. A range of skills may develop during childhood, which supports NW repetition skills.

  7. Soliton repetition rate in a silicon-nitride microresonator

    CERN Document Server

    Bao, Chengying; Wang, Cong; Jaramillo-Villegas, Jose A; Leaird, Daniel E; Qi, Minghao; Weiner, Andrew M

    2016-01-01

    The repetition rate of a Kerr comb comprising a single soliton in an anomalous dispersion silicon nitride microcavity is measured as a function of pump frequency tuning. The contributions from the Raman soliton self-frequency shift (SSFS) and from thermal effects are evaluated both experimentally and theoretically; the SSFS is found to dominate the changes in repetition rate. The relationship between the changes in repetition rate and pump frequency detuning is found to be independent of the nonlinearity coefficient and dispersion of the cavity. Modeling of the repetition rate change by using the generalized Lugiato-Lefever equation is discussed; the Kerr shock is found to have only a minor effect on repetition rate for cavity solitons with duration down to ~50 fs.

  8. Transgenerational effects of environmental enrichment on repetitive motor behavior development.

    Science.gov (United States)

    Bechard, Allison R; Lewis, Mark H

    2016-07-01

    The favorable consequences of environmental enrichment (EE) on brain and behavior development are well documented. Much less is known, however, about transgenerational benefits of EE on non-enriched offspring. We explored whether transgenerational effects of EE might extend to the development of repetitive motor behaviors in deer mice. Repetitive motor behaviors are invariant patterns of movement that, across species, can be reduced by EE. We found that EE not only attenuated the development of repetitive behavior in dams, but also in their non-enriched offspring. Moreover, maternal behavior did not seem to mediate the transgenerational effect we found, although repetitive behavior was affected by reproductive experience. These data support a beneficial transgenerational effect of EE on repetitive behavior development and suggest a novel benefit of reproductive experience.

  9. Soliton repetition rate in a silicon-nitride microresonator.

    Science.gov (United States)

    Bao, Chengying; Xuan, Yi; Wang, Cong; Jaramillo-Villegas, Jose A; Leaird, Daniel E; Qi, Minghao; Weiner, Andrew M

    2017-02-15

    The repetition rate of a Kerr comb composed of a single soliton in an anomalous group velocity dispersion silicon-nitride microcavity is measured as a function of pump frequency. By comparing operation in the soliton and non-soliton states, the contributions from the Raman soliton self-frequency shift (SSFS) and the thermal effects are evaluated; the SSFS is found to dominate the changes in the repetition rate, similar to silica cavities. The relationship between the changes in the repetition rate and the pump frequency detuning is found to be independent of the nonlinearity coefficient and dispersion of the cavity. Modeling of the repetition rate change by using the generalized Lugiato-Lefever equation is discussed; the Kerr shock is found to have only a minor effect on repetition rate for cavity solitons with duration down to ∼50  fs.

  10. Self-controlled KR schedules: does repetition order matter?

    Science.gov (United States)

    Patterson, Jae T; Carter, Michael J; Hansen, Steve

    2013-08-01

    The impact of an experimenter-defined repetition schedule on the utility of a self-controlled KR context during motor skill acquisition was examined. Participants were required to learn three novel spatial-temporal tasks in either a random or blocked repetition schedule with or without the opportunity to control their KR. Results from the retention period showed that participants provided control over their KR schedule in a random repetition schedule demonstrated superior learning. However, performance measures from the transfer test showed that, independent of repetition schedule, learners provided the opportunity to control their KR schedule demonstrated superior transfer performance compared to their yoked counterparts. The dissociated impact of repetition schedule and self-controlled KR schedules on retention and transfer is discussed.

  11. Impaired speech repetition and left parietal lobe damage.

    Science.gov (United States)

    Fridriksson, Julius; Kjartansson, Olafur; Morgan, Paul S; Hjaltason, Haukur; Magnusdottir, Sigridur; Bonilha, Leonardo; Rorden, Christopher

    2010-08-18

    Patients with left hemisphere damage and concomitant aphasia usually have difficulty repeating others' speech. Although impaired speech repetition, the primary symptom of conduction aphasia, has been associated with involvement of the left arcuate fasciculus, its specific lesion correlate remains elusive. This research examined speech repetition among 45 stroke patients who underwent aphasia testing and MRI examination. Based on lesion-behavior mapping, the primary structural damage most closely associated with impaired speech repetition was found in the posterior portion of the left arcuate fasciculus. However, perfusion-weighted MRI revealed that tissue dysfunction, in the form of either frank damage or hypoperfusion, to the left inferior parietal lobe, rather than the underlying white matter, was associated with impaired speech repetition. This latter result suggests that integrity of the left inferior parietal lobe is important for speech repetition and, as importantly, highlights the importance of examining cerebral perfusion for the purpose of lesion-behavior mapping in acute stroke.

  12. Repetition and Emotive Communication in Music Versus Speech

    Directory of Open Access Journals (Sweden)

    Elizabeth Hellmuth eMargulis

    2013-04-01

    Full Text Available Music and speech are often placed alongside one another as comparative cases. Their relative overlaps and disassociations have been well explored (e.g. Patel, 2010. But one key attribute distinguishing these two domains has often been overlooked: the greater preponderance of repetition in music in comparison to speech. Recent fMRI studies have shown that familiarity – achieved through repetition – is a critical component of emotional engagement with music (Pereira et al., 2011. If repetition is fundamental to emotional responses to music, and repetition is a key distinguisher between the domains of music and speech, then close examination of the phenomenon of repetition might help clarify the ways that music elicits emotion differently than speech.

  13. Physical Characteristics Underpinning Repetitive Lunging in Fencing.

    Science.gov (United States)

    Turner, Anthony N; Marshall, Geoff; Phillips, James; Noto, Angelo; Buttigieg, Conor; Chavda, Shyam; Downing, William; Atlay, Nathan; Dimitriou, Lygeri; Kilduff, Laim

    2016-11-01

    Turner, AN, Marshall, G, Phillips, J, Noto, A, Buttigieg, C, Chavda, S, Downing, W, Atlay, N, Dimitriou, L, and Kilduff, L. Physical characteristics underpinning repetitive lunging in fencing. J Strength Cond Res 30(11): 3134-3139, 2016-Given the repetitive demand to execute lunging and changes in direction within fencing, the ability to sustain these at maximal capacity is fundamental to performance. The aim of this study was threefold. First, to provide normative values for this variable referred to as repeat lunge ability (RLA) and second to identify the physical characteristics that underpin it. Third, was to establish if a cause and effect relationship existed by training the associated characteristics. Assessment of lower-body power, reactive strength, speed, change of direction speed (CODS), and a sport-specific RLA were conducted on senior and junior elite male fencers (n = 36). Fencers were on average (±SD) 18.9 ± 3.2 years of age, 174.35 ± 10.42 cm tall, 70.67 ± 7.35 kg in mass, and 8.5 ± 4.2 years fencing experience. The RLA test had average work times of 16.03 ± 1.40 seconds and demonstrated "large" to "very large" associations with all tested variables, but in particular CODS (r = 0.70) and standing broad jump (SBJ; r = -0.68). Through linear regression analysis, these also provided a 2-predictor model accounting for 61% of the common variance associated with RLA. A cause and effect relationship with SBJ and CODS was confirmed by the training group, where RLA performance in these fencers improved from 15.80 ± 1.07 to 14.90 ± 0.86 seconds, with the magnitude of change reported as "moderate" (effect size (ES) = 0.93). Concurrent improvements were also noted in both SBJ (216.86 ± 17.15 vs. 221.71 ± 17.59 cm) and CODS (4.44 ± 0.29 vs. 4.31 ± 0.09 seconds) and while differences were only significant in SBJ, magnitudes of change were classed as "small" (ES = 0.28) and "moderate" (ES = 0.61), respectively. In conclusion, to improve RLA strength

  14. Flash Heating of Crustal Rocks at Seismic Slip Rates

    Science.gov (United States)

    Goldsby, D. L.; Spagnuolo, E.; Smith, S. A.; Beeler, N. M.; Tullis, T. E.; Di Toro, G.; Nielsen, S. B.

    2012-12-01

    Recent experiments have demonstrated that rocks undergo extreme frictional weakening at near-earthquake slip rates due to the thermal degradation of the strength, or even melting, of microscopic asperity contacts on their sliding surfaces (Goldsby and Tullis, 2012). These previous experiments, conducted at constant normal stress and slip rates of up to ~0.4 m/s, revealed a 1/V dependence of friction on slip rate above a characteristic weakening velocity, Vw, in accord with theories of flash heating (e.g., Rice, 2006). The weakening velocity obtains values of ~0.1 m/s for many crustal silicate rocks (Goldsby and Tullis, 2012). Here we test two further predictions of flash-heating theory - that the degree of weakening saturates at slip rates approaching 1 m/s, and that the weakening behavior due to flash heating is independent of normal stress - by testing samples at slip rates of up to 1 m/s at different normal stresses. Experiments were conducted in a 1-atm, high-velocity friction apparatus at the Istituto Nazionale di Geofisica e Vulcanologia in Rome. A sample consisted of a pair of hollow cylinders of Westerly granite or Frederick diabase subjected to a nominally constant normal stress of from 1 to 30 MPa and subjected to a variety of rate-stepping sequences. Data were acquired at rates of up to 1 MHz. As predicted, the experiments demonstrate that the degree of weakening due to flash heating saturates at slip rates approaching 1 m/s; in a few cases, friction even increases slightly with increasing slip rate near 1 m/s. The experiments also demonstrate that, within the scatter of the data, the value of Vw and the friction coefficient in the weakened state is independent of normal stress, the expected result if average contact sizes and contact stresses are independent of normal stress. The data thus further corroborate existing theories and experimental data for flash heating, allowing for a more reliable determination of the conditions under which flash heating

  15. Impact Flash Physics: Modeling and Comparisons With Experimental Results

    Science.gov (United States)

    Rainey, E.; Stickle, A. M.; Ernst, C. M.; Schultz, P. H.; Mehta, N. L.; Brown, R. C.; Swaminathan, P. K.; Michaelis, C. H.; Erlandson, R. E.

    2015-12-01

    Hypervelocity impacts frequently generate an observable "flash" of light with two components: a short-duration spike due to emissions from vaporized material, and a long-duration peak due to thermal emissions from expanding hot debris. The intensity and duration of these peaks depend on the impact velocity, angle, and the target and projectile mass and composition. Thus remote sensing measurements of planetary impact flashes have the potential to constrain the properties of impacting meteors and improve our understanding of impact flux and cratering processes. Interpreting impact flash measurements requires a thorough understanding of how flash characteristics correlate with impact conditions. Because planetary-scale impacts cannot be replicated in the laboratory, numerical simulations are needed to provide this insight for the solar system. Computational hydrocodes can produce detailed simulations of the impact process, but they lack the radiation physics required to model the optical flash. The Johns Hopkins University Applied Physics Laboratory (APL) developed a model to calculate the optical signature from the hot debris cloud produced by an impact. While the phenomenology of the optical signature is understood, the details required to accurately model it are complicated by uncertainties in material and optical properties and the simplifications required to numerically model radiation from large-scale impacts. Comparisons with laboratory impact experiments allow us to validate our approach and to draw insight regarding processes that occur at all scales in impact events, such as melt generation. We used Sandia National Lab's CTH shock physics hydrocode along with the optical signature model developed at APL to compare with a series of laboratory experiments conducted at the NASA Ames Vertical Gun Range. The experiments used Pyrex projectiles to impact pumice powder targets with velocities ranging from 1 to 6 km/s at angles of 30 and 90 degrees with respect to

  16. Audition influences color processing in the sound-induced visual flash illusion.

    Science.gov (United States)

    Mishra, Jyoti; Martinez, Antigona; Hillyard, Steven A

    2013-12-18

    Multisensory interactions can lead to illusory percepts, as exemplified by the sound-induced extra flash illusion (SIFI: Shams, Kamitani, & Shimojo, 2000, 2002). In this illusion, an audio-visual stimulus sequence consisting of two pulsed sounds and a light flash presented within a 100 ms time window generates the visual percept of two flashes. Here, we used colored visual stimuli to investigate whether concurrent auditory stimuli can affect the perceived features of the illusory flash. Zero, one or two pulsed sounds were presented concurrently with either a red or green flash or with two flashes of different colors (red followed by green) in rapid sequence. By querying both the number and color of the participants' visual percepts, we found that the double flash illusion is stimulus specific: i.e., two sounds paired with one red or one green flash generated the percept of two red or two green flashes, respectively. This implies that the illusory second flash is induced at a level of visual processing after perceived color has been encoded. In addition, we found that the presence of two sounds influenced the integration of color information from two successive flashes. In the absence of any sounds, a red and a green flash presented in rapid succession fused to form a single orange percept, but when accompanied by two sounds, this integrated orange percept was perceived to flash twice on a significant proportion of trials. In addition, the number of concurrent auditory stimuli modified the degree to which the successive flashes were integrated to an orange percept vs. maintained as separate red-green percepts. Overall, these findings show that concurrent auditory input can affect both the temporal and featural properties of visual percepts. Copyright © 2013 Elsevier Ltd. All rights reserved.

  17. A first look at global flash drought: long term change and short term predictability

    Science.gov (United States)

    Yuan, Xing; Wang, Linying; Ji, Peng

    2017-04-01

    "Flash drought" became popular after the unexpected 2012 central USA drought, mainly due to its rapid development, low predictability and devastating impacts on water resources and crop yields. A pilot study by Mo and Lettenmaier (2015) found that flash drought, based on a definition of concurrent heat extreme, soil moisture deficit and evapotranspiration (ET) enhancement at pentad scale, were in decline over USA during recent 100 years. Meanwhile, a recent work indicated that the occurrence of flash drought in China was doubled during the past 30 years, where a severe flash drought in the summer of 2013 ravaged 13 provinces in southern China. As global warming increases the frequency of heat waves and accelerates the hydrological cycle, the flash drought is expected to increase in general, but its trend might also be affected by interannual to decadal climate oscillations. To consolidate the hotspots of flash drought and the effects of climate change on flash drought, a global inventory is being conducted by using multi-source observations (in-situ, satellite and reanalysis), CMIP5 historical simulations and future projections under different forcing scenarios, as well as global land surface hydrological modeling for key variables including surface air temperature, soil moisture and ET. In particular, a global picture of the flash drought distribution, the contribution of naturalized and anthropogenic forcings to global flash drought change, and the risk of global flash drought in the future, will be presented. Besides investigating the long-term change of flash drought, providing reliable early warning is also essential to developing adaptation strategies. While regional drought early warning systems have been emerging in recent decade, forecasting of flash drought is still at an exploratory stage due to limited understanding of flash drought predictability. Here, a set of sub-seasonal to seasonal (S2S) hindcast datasets are being used to assess the short term

  18. Generation of low-timing-jitter femtosecond pulse trains with 2 GHz repetition rate via external repetition rate multiplication.

    Science.gov (United States)

    Chen, Jian; Sickler, Jason W; Fendel, Peter; Ippen, Erich P; Kärtner, Franz X; Wilken, Tobias; Holzwarth, Ronald; Hänsch, Theodor W

    2008-05-01

    Generation of low-timing-jitter 150 fs pulse trains at 1560 nm with 2 GHz repetition rate is demonstrated by locking a 200 MHz fundamental polarization additive-pulse mode-locked erbium fiber laser to high-finesse external Fabry-Perot cavities. The timing jitter and relative intensity noise of the repetition-rate multiplied pulse train are investigated.

  19. Repetitive transcranial magnetic stimulation and drug addiction.

    Science.gov (United States)

    Barr, Mera S; Farzan, Faranak; Wing, Victoria C; George, Tony P; Fitzgerald, Paul B; Daskalakis, Zafiris J

    2011-10-01

    Repetitive transcranial magnetic stimulation (rTMS) is a non-invasive brain stimulation technique that is now being tested for its ability to treat addiction. This review discusses current research approaches and results of studies which measured the therapeutic use of rTMS to treat tobacco, alcohol and illicit drug addiction. The research in this area is limited and therefore all studies evaluating the therapeutic use of rTMS in tobacco, alcohol or illicit drug addiction were retained including case studies through NCBI PubMed ( http://www.ncbi.nlm.nih.gov ) and manual searches. A total of eight studies were identified that examined the ability of rTMS to treat tobacco, alcohol and cocaine addiction. The results of this review indicate that rTMS is effective in reducing the level of cravings for smoking, alcohol, and cocaine when applied at high frequencies to the dorsolateral prefrontal cortex (DLPFC). Furthermore, these studies suggest that repeated sessions of high frequency rTMS over the DLPFC may be most effective in reducing the level of smoking and alcohol consumption. Although work in this area is limited, this review indicates that rTMS is a promising modality for treating drug addiction.

  20. Development of a repetitive compact torus injector

    Science.gov (United States)

    Onchi, Takumi; McColl, David; Dreval, Mykola; Rohollahi, Akbar; Xiao, Chijin; Hirose, Akira; Zushi, Hideki

    2013-10-01

    A system for Repetitive Compact Torus Injection (RCTI) has been developed at the University of Saskatchewan. CTI is a promising fuelling technology to directly fuel the core region of tokamak reactors. In addition to fuelling, CTI has also the potential for (a) optimization of density profile and thus bootstrap current and (b) momentum injection. For steady-state reactor operation, RCTI is necessary. The approach to RCTI is to charge a storage capacitor bank with a large capacitance and quickly charge the CT capacitor bank through a stack of integrated-gate bipolar transistors (IGBTs). When the CT bank is fully charged, the IGBT stack will be turned off to isolate banks, and CT formation/acceleration sequence will start. After formation of each CT, the fast bank will be replenished and a new CT will be formed and accelerated. Circuits for the formation and the acceleration in University of Saskatchewan CT Injector (USCTI) have been modified. Three CT shots at 10 Hz or eight shots at 1.7 Hz have been achieved. This work has been sponsored by the CRC and NSERC, Canada.

  1. Fuzzballs with internal excitations

    Energy Technology Data Exchange (ETDEWEB)

    Kanitscheider, Ingmar; Skenderis, Kostas; Taylor, Marika [Institute for Theoretical Physics, University of Amsterdam, Valckenierstraat 65, 1018XE Amsterdam (Netherlands)

    2007-06-15

    We construct general 2-charge D1-D5 horizon-free non-singular solutions of IIB supergravity on T{sup 4} and K3 describing fuzzballs with excitations in the internal manifold; these excitations are characterized by arbitrary curves. The solutions are obtained via dualities from F1-P solutions of heterotic and type IIB on T{sup 4} for the K3 and T{sup 4} cases, respectively. We compute the holographic data encoded in these solutions, and show that the internal excitations are captured by vevs of chiral primaries associated with the middle cohomology of T{sup 4} or K3. We argue that each geometry is dual to a specific superposition of R ground states determined in terms of the Fourier coefficients of the curves defining the supergravity solution. We compute vevs of chiral primaries associated with the middle cohomology and show that they indeed acquire vevs in the superpositions corresponding to fuzzballs with internal excitations, in accordance with the holographic results. We also address the question of whether the fuzzball program can be implemented consistently within supergravity.

  2. Excitation of Stellar Pulsations

    DEFF Research Database (Denmark)

    Houdek, G.

    2012-01-01

    In this review I present an overview of our current understanding of the physical mechanisms that are responsible for the excitation of pulsations in stars with surface convection zones. These are typically cooler stars such as the δ Scuti stars, and stars supporting solar-like oscillations....

  3. Decoherence at constant excitation

    Science.gov (United States)

    Torres, J. M.; Sadurní, E.; Seligman, T. H.

    2012-02-01

    We present a simple exactly solvable extension of the Jaynes-Cummings model by adding dissipation. This is done such that the total number of excitations is conserved. The Liouville operator in the resulting master equation can be reduced to blocks of 4×4 matrices.

  4. Decoherence at constant excitation

    CERN Document Server

    Torres, Juan Mauricio; Seligman, Thomas H

    2011-01-01

    We present a simple exactly solvable extension of of the Jaynes-Cummings model by adding dissipation. This is done such that the total number of excitations is conserved. The Liouville operator in the resulting master equation can be reduced to blocks of $4\\times 4$ matrices.

  5. Positron excitation of neon

    Science.gov (United States)

    Parcell, L. A.; Mceachran, R. P.; Stauffer, A. D.

    1990-01-01

    The differential and total cross section for the excitation of the 3s1P10 and 3p1P1 states of neon by positron impact were calculated using a distorted-wave approximation. The results agree well with experimental conclusions.

  6. Two-photon excitation photodynamic therapy with Photofrin

    Science.gov (United States)

    Karotki, Aliaksandr; Khurana, Mamta; Lepock, James R.; Wilson, Brian C.

    2005-09-01

    Photodynamic therapy (PDT) based on simultaneous two-photon (2-γ) excitation has a potential advantage of highly targeted treatment by means of nonlinear localized photosensitizer excitation. One of the possible applications of 2-γ PDT is a treatment of exodus age-related macular degeneration where highly targeted excitation of photosensitizer in neovasculature is vital for reducing collateral damage to healthy surrounding tissue. To investigate effect of 2-γ PDT Photofrin was used as an archetypal photosensitizer. First, 2-γ absorption properties of Photofrin in the 750 - 900 nm excitation wavelength range were investigated. It was shown that above 800 nm 2-γ interaction was dominant mode of excitation. The 2-γ cross section of Photofrin was rather small and varied between 5 and 10 GM (1 GM = 10-50 cm4s/photon) in this wavelength range. Next, endothelial cells treated with Photofrin were used to model initial effect of 2-γ PDT on neovasculature. Ultrashort laser pulses provided by mode-locked Ti:sapphire laser (pulse duration at the sample 300 fs, repetition rate 90 MHz, mean laser power 10 mW, excitation wavelength 850 nm) were used for the excitation of the photosensitizer. Before 2-γ excitation of the Photofrin cells formed a single continuous sheet at the bottom of the well. The tightly focused laser light was scanned repeatedly over the cell layer. After irradiation the cell layer of the control cells stayed intact while cells treated with photofrin became clearly disrupted. The light doses required were high (6300 Jcm(-2) for ~ 50% killing), but 2-γ cytotoxicity was unequivocally demonstrated.

  7. Elements of M-I Coupling in Repetitive Substorm Activity Driven by Interplanetary CMEs

    Science.gov (United States)

    Farrugia, C. J.; Sandholt, P. E.

    2014-12-01

    By means of case studies we explore key elements of the magnetosphere-ionosphere current system associated with repetitive substorm activity during persistent strong forcing by ICMEs. Our approach consists of a combination of the magnetospheric and ionospheric perspectives on the substorm activity. The first aspect is the near-Earth plasma sheet with its repetitive excitations of the substorm current wedge, as monitored by spacecraft GOES-10 when it traversed the 2100-0300 MLT sector, and its coupling to the westward auroral electrojet (WEJ) centered near midnight during the stable interplanetary (IP) conditions. The second aspect is the excitation of Bostrom type II currents maximizing at dusk and dawn and their associated ionospheric Pedersen current closure giving rise to EEJ (WEJ) events at dusk (dawn). As documented in our study, this aspect is related to the braking phase of Earthward-moving dipolarization fronts-bursty bulk flows. We follow the magnetospheric flow/field events from spacecraft Geotail in the midtail (X = - 11 Re) lobe to geostationary altitude at pre-dawn MLTs (GOES 10). The associated M-I coupling is obtained from ground-satellite conjunctions across the double auroral oval configuration along the meridian at dusk. By this technique we distinguish between ionospheric manifestations in three latitude regimes: (i) auroral oval south, (ii) auroral oval north, and (iii) polar cap. Regime (iii) is characterized by events of enhanced antisunward convection near the polar cap boundary (flow channel events) and in the central polar cap (PCN-index events). The repetitive substorm activity is discussed in the context of the level of IP driving as given by the geoeffective IP electric field (E_KL), magnetotail reconnection (inferred from the PCN-index and spacecraft Wind at X = - 77 Re) and the storm SYM-H index. We distinguish between different variants of the repetitive substorm activity, giving rise to electrojet (AL)-plasma convection (PCN) events

  8. Biodiesel Production by Reactive Flash: A Numerical Simulation

    Directory of Open Access Journals (Sweden)

    Alejandro Regalado-Méndez

    2016-01-01

    Full Text Available Reactive flash (RF in biodiesel production has been studied in order to investigate steady-state multiplicities, singularities, and effect of biodiesel quality when the RF system approaches to bubble point. The RF was modeled by an index-2 system of differential algebraic equations, the vapor split (ϕ was computed by modified Rachford-Rice equation and modified Raoult’s law computed bubble point, and the continuation analysis was tracked on MATCONT. Results of this study show the existence of turning points, leading to a unique bubble point manifold, (xBiodiesel,T=(0.46,478.41 K, which is a globally stable flashing operation. Also, the results of the simulation in MATLAB® of the dynamic behavior of the RF show that conversion of triglycerides reaches 97% for a residence time of 5.8 minutes and a methanol to triglyceride molar flow ratio of 5 : 1.

  9. Flash pryolysis of biomass with reactive and nonreactive gases

    Science.gov (United States)

    Sundaram, M. S.; Steinberg, M.; Fallon, P. T.

    1982-10-01

    Studies were done on the flash pyrolysis of Douglas Fir wood in the presence of reactive and nonreactive gases including hydrogen, methane, and helium. Pyrolysis and gasification of the wood particles was done in one step, without catalysts. Almost complete (98%) gasification of the carbon in Douglas fir wood was achieved at 10000C and 500-psi hydrogen pressure. The reaction products were methane, ethane, ethylene, carbon monoxide, BTX, and water. Flash hydropyrolysis produced a large yield of hydrocarbon gases (up to 78% C) comprising methane and ethane. High yields of ethylene (up to 21% C) and BTX (up to 12% C) were obtained via methane pyrolysis of fir wood; a free radical mechanism is proposed to explain the enhanced yield of ethylene in a methane atmosphere.

  10. Measurement and analysis of coherent synchrotron radiation effects at FLASH

    Energy Technology Data Exchange (ETDEWEB)

    Beutner, B.

    2007-12-15

    The vacuum-ultra-violet Free Electron Laser in Hamburg (FLASH) is a linac driven SASE-FEL. High peak currents are produced using magnetic bunch compression chicanes. In these magnetic chicanes, the energy distribution along an electron bunch is changed by eff ects of Coherent Synchrotron Radiation (CSR). Energy changes in dispersive bunch compressor chicanes lead to transverse displacements along the bunch. These CSR induced displacements are studied using a transverse deflecting RF-structure. Experiments and simulations concerning the charge dependence of such transverse displacements are presented and analysed. In these experiments an over-compression scheme is used which reduces the peak current downstream the bunch compressor chicanes. Therefore other self interactions like space charge forces which might complicate the measurements are suppressed. Numerical simulations are used to analyse the beam dynamics under the influence of CSR forces. The results of these numerical simulations are compared with the data obtained in the over-compression experiments at FLASH. (orig.)

  11. Measuring x-ray spectra of flash radiographic sources

    Science.gov (United States)

    Gehring, Amanda E.; Espy, Michelle A.; Haines, Todd J.; Mendez, Jacob; Moir, David C.; Sedillo, Robert; Shurter, Roger P.; Volegov, Petr; Webb, Timothy J.

    2015-08-01

    A Compton spectrometer has been re-commissioned for measurements of flash radiographic sources. The determination of the energy spectrum of these sources is difficult due to the high count rates and short nature of the pulses (~50 ns). The spectrometer is a 300 kg neodymium-iron magnet which measures spectra in the <1 MeV to 20 MeV energy range. Incoming x-rays are collimated into a narrow beam incident on a converter foil. The ejected Compton electrons are collimated so that the forward-directed electrons enter the magnetic field region of the spectrometer. The position of the electrons at the magnet's focal plane is a function of their momentum, allowing the x-ray spectrum to be reconstructed. Recent measurements of flash sources are presented.

  12. Flash characteristics of plasma induced by hypervelocity impact

    Science.gov (United States)

    Zhang, Kai; Long, Renrong; Zhang, Qingming; Xue, Yijiang; Ju, Yuanyuan

    2016-08-01

    Using a two-stage light gas gun, a series of hypervelocity impact experiments was conducted in which 6.4-mm-diameter spherical 2024-aluminum projectiles impact 23-mm-thick targets made of the same material at velocities of 5.0, 5.6, and 6.3 km/s. Both an optical pyrometer composed of six photomultiplier tubes and a spectrograph were used to measure the flash of the plasma during hypervelocity impact. Experimental results show that, at a projectile velocity of 6.3 km/s, the strong flash lasted about 10 μs and reached a temperature of 4300 K. Based on the known emission lines of AL I, spectral methods can provide the plasma electron temperature. An electron-temperature comparison between experiment and theoretical calculation indicates that single ionization and secondary ionization are the two main ionizing modes at velocities 5.0-6.3 km/s.

  13. Visualizing Library Statistics using Open Flash Chart 2 and Drupal

    Directory of Open Access Journals (Sweden)

    Laura K. Wiegand

    2013-01-01

    Full Text Available Libraries continue to need to demonstrate their value to stakeholders, and while statistics alone do not represent value, they are an important element. We found ourselves, and our stakeholders, uninspired by our infrequently updated bulleted list of statistics on our website and so set out to create a more dynamic and visually appealing look at our statistics. This article outlines how we used our content management system, Drupal, Open Flash Chart and custom programming to convert library statistics into Flash charts, including how to populate the graphs with dynamic data from external sources. The end result is our Library Statistics Dashboard (http://library.uncw.edu/facts_planning/dashboard that visually demonstrates the use, activity and resources in the library via interactive and visually interesting graphs.

  14. Hartmann wavefront sensors and their application at FLASH.

    Science.gov (United States)

    Keitel, Barbara; Plönjes, Elke; Kreis, Svea; Kuhlmann, Marion; Tiedtke, Kai; Mey, Tobias; Schäfer, Bernd; Mann, Klaus

    2016-01-01

    Different types of Hartmann wavefront sensors are presented which are usable for a variety of applications in the soft X-ray spectral region at FLASH, the free-electron laser (FEL) in Hamburg. As a typical application, online measurements of photon beam parameters during mirror alignment are reported on. A compact Hartmann sensor, operating in the wavelength range from 4 to 38 nm, was used to determine the wavefront quality as well as aberrations of individual FEL pulses during the alignment procedure. Beam characterization and alignment of the focusing optics of the FLASH beamline BL3 were performed with λ(13.5 nm)/116 accuracy for wavefront r.m.s. (w(rms)) repeatability, resulting in a reduction of w(rms) by 33% during alignment.

  15. Flash Flooding - Ways That Science and Adaptation Reduce Losses

    Science.gov (United States)

    Gruntfest, E.

    2014-12-01

    Flash flood vulnerability is increasing. Predictability is more difficult as more flooding results after wildfires destroy hillside vegetation. Recent extreme events have occurred outside of seasonal norms with well beyond expected precipitation rates, and with unusual storm behavior where precipitation rates increase at the end of a storm. Engineers, social scientists, physical scientists, planners, emergency managers and others must collaborate in new ways to keep losses from rising. For example improved detection using cameras and gages must be complemented by understanding why people drive through flooded roads and what can be done to reduce the number of people on flooded roadways. Case studies of successful collaborations will be provided along with discussion of challenges and opportunities for expanding the innovative flash flood risk reduction strategies.

  16. uFLIP: Understanding the Energy Consumption of Flash Devices

    DEFF Research Database (Denmark)

    Bjørling, Matias; Bonnet, Philippe; Bouganim, Luc

    2010-01-01

    Understanding the energy consumption of flash devices is important for two reasons. First, energy is emerging as a key metric for data management systems. It is thus important to understand how we can reason about the energy consumption of flash devices beyond their approximate aggregate...... consumption (low power consumption in idle mode, average Watt consumption from the data sheets). Second, when measured at a sufficiently fine granularity, the energy consumption of a given device might complement the performance characteristics derived from its response time profile. Indeed, background work...... which is not directly observable with a response time profile appears clearly when energy is used as a metric. In this paper, we discuss the results from the {uFLIP} benchmark applied to four different {SSD} devices using both response time and energy as metric....

  17. Total Lightning Flash Activity Response to Aerosol over China Area

    Directory of Open Access Journals (Sweden)

    Pengguo Zhao

    2017-01-01

    Full Text Available Twelve years of measurements of aerosol optical depth (AOD, cloud fraction, cloud top height, ice cloud optical thickness and lightning flash density from 2001 to 2012 have been analyzed to investigate the effect of aerosols on electrical activity over an area of China. The results show that increasing aerosol loading inspires the convective intensity, and then increases the lightning flash density. The spatial distribution of the correlation between aerosol loading and electrical activity shows a remarkable regional difference over China. The high-correlation regions embody the positive aerosol microphysical effect on the intensity of the electrical activity, while the large-scale processes may play the main role in convection development and producing lightning in low-correlation regions.

  18. uFLIP: Understanding the Energy Consumption of Flash Devices

    DEFF Research Database (Denmark)

    Bjørling, Matias; Bonnet, Philippe; Bouganim, Luc

    2010-01-01

    Understanding the energy consumption of flash devices is important for two reasons. First, energy is emerging as a key metric for data management systems. It is thus important to understand how we can reason about the energy consumption of flash devices beyond their approximate aggregate...... consumption (low power consumption in idle mode, average Watt consumption from the data sheets). Second, when measured at a sufficiently fine granularity, the energy consumption of a given device might complement the performance characteristics derived from its response time profile. Indeed, background work...... which is not directly observable with a response time profile appears clearly when energy is used as a metric. In this paper, we discuss the results from the {uFLIP} benchmark applied to four different {SSD} devices using both response time and energy as metric....

  19. Measurement of thermophysical properties of ceramics by the flash method

    Directory of Open Access Journals (Sweden)

    Cláudio S. C. Pinto

    2006-01-01

    Full Text Available The flash method, proposed by Parker, Butler, Jenkins and Abbott from the U.S. Navy Radiological Defense Laboratory in 1961, is the most popular method for measuring the thermal diffusivity of solids. In this method, the front surface of a small sample is subjected to a very short burst of radiant thermal energy. The resulting temperature rise on the opposite surface of the sample is measured and the thermal diffusivity is computed from the temperature rise versus time data. Also, the specific heat can be computed from the measured data, thus allowing for the calculation of the thermal conductivity. Several theoretical models are available for the flash method, which include adiabatic boundary conditions, heat losses, surface coating effects, among other aspects. In this paper, tests were made for the identification of thermo-physical properties of a Ceramic block. The Netzsch Nanoflash LFA 447/1 of LTTC/COPPE/UFRJ was used for the measurements.

  20. Flash flood modeling with the MARINE hydrological distributed model

    Directory of Open Access Journals (Sweden)

    V. Estupina-Borrell

    2006-11-01

    Full Text Available Flash floods are characterized by their violence and the rapidity of their occurrence. Because these events are rare and unpredictable, but also fast and intense, their anticipation with sufficient lead time for warning and broadcasting is a primary subject of research. Because of the heterogeneities of the rain and of the behavior of the surface, spatially distributed hydrological models can lead to a better understanding of the processes and so on they can contribute to a better forecasting of flash flood. Our main goal here is to develop an operational and robust methodology for flash flood forecasting. This methodology should provide relevant data (information about flood evolution on short time scales, and should be applicable even in locations where direct observations are sparse (e.g. absence of historical and modern rainfalls and streamflows in small mountainous watersheds. The flash flood forecast is obtained by the physically based, space-time distributed hydrological model "MARINE'' (Model of Anticipation of Runoff and INondations for Extreme events. This model is presented and tested in this paper for a real flash flood event. The model consists in two steps, or two components: the first component is a "basin'' flood module which generates flood runoff in the upstream part of the watershed, and the second component is the "stream network'' module, which propagates the flood in the main river and its subsidiaries. The basin flash flood generation model is a rainfall-runoff model that can integrate remotely sensed data. Surface hydraulics equations are solved with enough simplifying hypotheses to allow real time exploitation. The minimum data required by the model are: (i the Digital Elevation Model, used to calculate slopes that generate runoff, it can be issued from satellite imagery (SPOT or from French Geographical Institute (IGN; (ii the rainfall data from meteorological radar, observed or

  1. FLASH Assembly of TALENs Enables High-Throughput Genome Editing

    OpenAIRE

    Reyon, Deepak; Tsai, Shengdar Q.; Khayter, Cyd; Foden, Jennifer A.; Sander, Jeffry D.; Joung, J. Keith

    2012-01-01

    Engineered transcription activator-like effector nucleases (TALENs) have shown promise as facile and broadly applicable genome editing tools. However, no publicly available high-throughput method for constructing TALENs has been published and large-scale assessments of the success rate and targeting range of the technology remain lacking. Here we describe the Fast Ligation-based Automatable Solid-phase High-throughput (FLASH) platform, a rapid and cost-effective method we developed to enable ...

  2. Media Pengetahuan Metamorfosis Kupu-Kupu dengan Adobe Flash

    OpenAIRE

    Adjie, Fauzan

    2015-01-01

    Kajian ini bertujuan untuk membangun sebuah sistem aplikasi pengenalan. Aplikasi pengethauan metamorfosis kupu - kupu ini dibuat dengan menggunakan perangkat lunak macromedia flash 5. Manfaat dari sistem pengenalan ini adalah membantu para siswa sekolah dasar maupun sekolah menengah atas untuk mengetahui metamorfosis kupu - kupu, khususnya pengetahuan alam. Isi yang di sampaikan mulai dari teori pengetahuan metamorfosis kupu - kupu, yaitu siklus hidup dan metamorfosis yang dimulai dari telur ...

  3. Media Pengetahuan Metamorfosis Kupu-Kupu dengan Adobe Flash

    OpenAIRE

    Adjie, Fauzan

    2015-01-01

    Kajian ini bertujuan untuk membangun sebuah sistem aplikasi pengenalan. Aplikasi pengethauan metamorfosis kupu - kupu ini dibuat dengan menggunakan perangkat lunak macromedia flash 5. Manfaat dari sistem pengenalan ini adalah membantu para siswa sekolah dasar maupun sekolah menengah atas untuk mengetahui metamorfosis kupu - kupu, khususnya pengetahuan alam. Isi yang di sampaikan mulai dari teori pengetahuan metamorfosis kupu - kupu, yaitu siklus hidup dan metamorfosis yang dimulai dari telur ...

  4. Flash flood swift water rescues, Texas, 2005–2014

    Directory of Open Access Journals (Sweden)

    Vaidehi Shah

    2017-01-01

    Full Text Available Although rainfall patterns are complex and difficult to predict, climate models suggest precipitation in Texas will occur less frequently and with greater intensity in the future. In combination with rapid population growth and development, extreme rainfall events are likely to lead to flash floods and necessitate swift water rescues. Swift water rescues are used to retrieve person(s from swift water flowing at a rate of 1 knot or greater. Data were obtained from the Texas Fire Marshal’s Office and analyzed to describe spatial and temporal characteristics of rescues. Between 2005 and 2014, 3256 swift water rescues were reported from 136 of 254 (54% counties. Over half (54.6%, n = 1777 occurred in counties known as Flash Flood Alley, which includes Texas’ largest and fastest growing cities. Less than 1.0% (n = 18 were reported from 49 counties designated as completely rural, or with an urban population less than 2500. Increases in swift water rescues were seen between March and September and during major weather events such as tropical storms. Because county-level data was utilized and demographic data was missing in all but 2% (n = 47 of the incidents, our ability to identify populations at risk or target interventions in the future using this data is limited. Despite the frequency of flash flood events and swift water rescues in Texas, knowledge gaps persist that should be addressed through the conduct of interdisciplinary research by epidemiologists and climatologists and by disseminating evidence-based health education and safety programs, particularly in rapidly growing counties that make up Texas’ Flash Flood Alley.

  5. On the Mechanism of Microwave Flash Sintering of Ceramics

    Directory of Open Access Journals (Sweden)

    Yury V. Bykov

    2016-08-01

    Full Text Available The results of a study of ultra-rapid (flash sintering of oxide ceramic materials under microwave heating with high absorbed power per unit volume of material (10–500 W/cm3 are presented. Ceramic samples of various compositions—Al2O3; Y2O3; MgAl2O4; and Yb(LaO2O3—were sintered using a 24 GHz gyrotron system to a density above 0.98–0.99 of the theoretical value in 0.5–5 min without isothermal hold. An analysis of the experimental data (microwave power; heating and cooling rates along with microstructure characterization provided an insight into the mechanism of flash sintering. Flash sintering occurs when the processing conditions—including the temperature of the sample; the properties of thermal insulation; and the intensity of microwave radiation—facilitate the development of thermal runaway due to an Arrhenius-type dependency of the material’s effective conductivity on temperature. The proper control over the thermal runaway effect is provided by fast regulation of the microwave power. The elevated concentration of defects and impurities in the boundary regions of the grains leads to localized preferential absorption of microwave radiation and results in grain boundary softening/pre-melting. The rapid densification of the granular medium with a reduced viscosity of the grain boundary phase occurs via rotation and sliding of the grains which accommodate their shape due to fast diffusion mass transport through the (quasi-liquid phase. The same mechanism based on a thermal runaway under volumetric heating can be relevant for the effect of flash sintering of various oxide ceramics under a dc/ac voltage applied to the sample.

  6. Fabric Fashion Flash Autumn-Winter 2011-2012

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    Italian Trade Commission (I.C.E) joined Ornella Bignami releasing the FABRIC FASHION FLASH AUTUMN-WINTER 2011-2012, in Intertex Shanghai, October.Enriched by an uninterrupted dialogue within the profession for over 25 years, through a fine tuned skill in deciphering major trends and social changes, Ornella Bignami has earned a wide credibility in the field of textile industry, fashion and home textile products.

  7. Fluctuation theorem for the flashing ratchet model of molecular motors

    Science.gov (United States)

    Lacoste, D.; Mallick, K.

    2009-08-01

    Molecular motors convert chemical energy derived from the hydrolysis of adenosine triphosphate (ATP) into mechanical energy. A well-studied model of a molecular motor is the flashing ratchet model. We show that this model exhibits a fluctuation relation known as the Gallavotti-Cohen symmetry. Our study highlights the fact that the symmetry is present only if the chemical and mechanical degrees of freedom are both included in the description.

  8. Repetitive energy transfer from an inductive energy store

    Energy Technology Data Exchange (ETDEWEB)

    Honig, E.M.

    1984-01-01

    The theoretical and experimental results of a research program aimed at finding practical ways to transfer energy repetitively from an inductive energy store to various loads are discussed. The objectives were to investigate and develop the high power opening switches and transfer circuits needed to enable high-repetition-rate operation of such systems, including a feasibility demonstration at a current level near 10 kA and a pulse repetition rate of 1-10 kpps with a 1-ohm load. The requirements of nonlinear, time-varying loads, such as the railgun electromagnetic launcher, were also addressed. Energy storage capability is needed for proper power conditioning in systems where the duty factor of the output pulse train is low. Inductive energy storage is attractive because it has both a high energy storage density and a fast discharge capability. By producing a pulse train with a peak power of 75 MW at a pulse repetition rate of 5 kpps in a one-ohm load system, this research program was the first to demonstrate fully-controlled, high-power, high-repetition-rate operation of an inductive energy storage and transfer system with survivable switches. Success was made possible by using triggered vacuum gap switches as repetitive, current-zero opening switches and developing several new repetitive transfer circuits using the counterpulse technique.

  9. Skill learning in mirror reading: how repetition determines acquisition.

    Science.gov (United States)

    Ofen-Noy, N; Dudai, Y; Karni, A

    2003-07-01

    Practice makes perfect, but the role of repetitions in skill learning is not yet fully understood. For example, given a similar number of trials on a given task, it is debated whether repeating and non-repeating items are learned by the same neural process. When one is given training with both types of items--does one learn two separate skills, or only one? Here we show, using a mirror reading task, that practice trials with trial-unique words, and practice trials with repeated words, count towards learning to a different degree. There was no interaction between the time-course of learning repeated and unique words even within the same individuals given mixed training. While repeated words were learned faster than unique words, the repetitions-dependent gains diminished with training beyond a small number of repetitions. Moreover, the gains in performance could not be accounted for solely by the number of repetitions, as assumed by power-law models of learning; rather, the passage of time was a critical factor. Finally, our results suggest that although both repeated and new words were learned by both declarative and procedural memory mechanisms, even a single repetition of specific words could lead to the establishment of a selective differential representation in memory. The results are compatible with the notion of a repetition-sensitive process, triggered by specific repeating events. This 'repetition counter' may be a critical trigger for the effective formation of procedural as well as some type of declarative memory.

  10. Determining the material parameters for the reconstruction of defects in carbon fiber reinforced polymers from data measured by flash thermography

    Science.gov (United States)

    Müller, Jan P.; Götschel, Sebastian; Maierhofer, Christiane; Weiser, Martin

    2017-02-01

    Flash thermography is a fast and reliable non-destructive testing method for the investigation of defects in carbon fiber reinforced polymer (CFRP) materials. In this paper numerical simulations of transient thermography data are presented, calculated for a quasi-isotropic flat bottom hole sample. They are compared to experimental data. These simulations are one important step towards the quantitative reconstruction of a flaw by assessing thermographic data. The applied numerical model is based on the finite-element method, extended by a semi-analytical treatment of the boundary of the sample, which is heated by the flash light. A crucial part for a reliable numerical model is the prior determination of the material parameters of the specimen as well as of the experimental parameters of the set-up. The material parameters in plane and in depth diffusivity are measured using laser line excitation. In addition, the absorption and heat transfer process of the first layers is investigated using an IR microscopic lens. The performance of the two distinct components of CFRP during heating - epoxy resin and carbon fibers - is examined. Finally, the material parameters are optimized by variation and comparison of the simulation results to the experimental data. The optimized parameters are compared to the measured ones and further methods to ensure precise material parameter measurements are discussed.

  11. Spatial Frequency Modulates the Degree of Illusory Second Flash Perception.

    Science.gov (United States)

    Takeshima, Yasuhiro; Gyoba, Jiro

    2015-01-01

    When a brief single flash is presented simultaneously with two brief beeps, the number of presented flashes is often perceived as two. This phenomenon is referred to as the fission illusion. Several effects related to the fission illusion have been investigated using both psychophysical and neurophysiological methods. The present study examined the effects of spatial frequency on the fission illusion. At a low spatial frequency, transient channels respond preferably; conversely, sustained channels respond preferably at a high spatial frequency. Sustained channels differ in temporal properties from transient channels and are characterized by poor temporal resolution and slow-onset responses. In our previous study, visual stimuli presented at a slow processing speed were not conducive to the fission illusion. Therefore, we hypothesized that the fission illusion would not be difficult to observe when using high spatial frequencies. The results indicated that the degree of the perceived illusory second flash was reduced when spatial frequency was high as compared to when it was is low. Furthermore, according to signal detection theory, this difference between high and low spatial frequencies was not attributed to participants' response biases. Therefore, the fission illusion likely will not occur in conditions of slow processing speed and long response latencies in sustained channels, which respond preferably to high spatial frequency stimuli. Overall, the results indicated that the fission illusion was affected by temporal characteristics of lower-order sensory processing stages.

  12. Energetic and exergetic Improvement of geothermal single flash cycle

    Directory of Open Access Journals (Sweden)

    Navid Nazari

    2016-08-01

    Full Text Available This paper presents a detailed analysis of a new method for improving energetic and exergetic efficiencies of single flash cycle. The thermodynamic process of the new method consists of extracting a fraction of hot wellhead geothermal brine for the purpose of superheating saturated steam entering the turbine. Computer programming scripts were developed and optimized based on mathematical proposed models for the different components of the systems. The operating parameters such as separator temperature, geofluid wellhead enthalpy and geothermal source temperature are varied to investigate their effects on both net power output and turbine exhaust quality of the systems. Also, full exergy assessment was performed for the new design. The results of separator temperature optimization revealed that specific net power output of the new design can be boosted up to 8% and turbine exhaust quality can be diminished up to 50% as compared to common single flash cycle. In addition, for wells with higher discharge enthalpy, superheating process improve specific net power output even up to 10%. Finally, it was observed that the overall system exergy efficiency was approximately raised 3%. Article History: Received January 5th 2016; Received in revised form June 25th 2016; Accepted July 3rd 2016; Available online How to Cite This Article: Nazari, N. and Porkhial, S. (2016. Energetic and Exergetic Improvement of Geothermal Single Flash Cycle. Int. Journal of Renewable Energy Development, 5(2,129-138. http://dx.doi.org/10.14710/ijred.5.2.129-138 

  13. Detection and spectral measurements of coherent synchrotron radiation at FLASH

    Energy Technology Data Exchange (ETDEWEB)

    Behrens, Christopher

    2010-02-15

    The operation of high-gain free-electron laser (FEL) underlies tremendous demands on high quality electron beams with high peak currents. At the Free-Electron-Laser in Hamburg (FLASH), two magnetic bunch compressors are used to compress the electron bunches longitudinally. In the bunch compressor magnets, these short electron bunches generate coherent synchrotron radiation (CSR). This CSR contains information on the longitudinal bunch profile, which is relevant for driving an FEL. In order to investigate coherent synchrotron radiation at the second bunch compressor BC3 at FLASH, a new setup behind the last dipole was installed. For the detection of coherent synchrotron radiation, which is emitted in the infrared regime, pyroelectric detectors were used. These pyroelectric detectors have been calibrated at the free-electron laser FELIX in the wavelength range from 5 {mu}m to 110 {mu}m. For characterisation of the emitted radiation, a transverse scanning device was used to measure the transverse intensity distribution. Various transmission filters were used to obtain additional information about the spectral content. In order to get spectral information with high resolution over a wide wavelength range, a rotating mirror spectrometer using reflective blazed gratings was installed. Using this spectrometer, the first spectral measurements of coherent synchrotron radiation at FLASH in a wavelength range from 10 {mu}m to 160 {mu}m were done. (orig.)

  14. Nonequilibrium vapor-generation model for flashing flows

    Energy Technology Data Exchange (ETDEWEB)

    Saha, P.; Abuaf, N.; Wu, B. J.C.

    1981-01-01

    A nonequilibrium vapor generation model for flashing flows is presented. The model consists of a flashing inception point, a bubbly flow regime followed by a bubbly-slug regime, an annular or annular-mist regime, and finally a dispersed-droplet regime. Existence of superheated liquid at the inception point and beyond is recognized. The vapor generation rate in each flow regime is calculated from the estimates for interfacial area density and net interfacial heat flux. However, the bubble number density at the flashing inception point was varied to obtain optimum fits with the void fraction data taken in a vertical converging-diverging nozzle. The interfacial area density at the inception point, thus determined, showed a rapid increase with the decrease in the liquid superheat at that point. This trend is correct since in the limit of thermal equilibrium flow where the liquid superheat approaches zero, the interfacial area for heat and mass transfer should approach infinity. 32 refs., 7 figs., 1 tab.

  15. Modelling (flash) floods in a Dutch lowland catchment

    Science.gov (United States)

    Brauer, C. C.; Teuling, A. J.; Overeem, A.; van der Velde, Y.; Hazenberg, P.; Warmerdam, P. M. M.; Kloosterman, P.; Uijlenhoet, R.

    2012-04-01

    On 26 August 2010 the eastern part of The Netherlands and the bordering part of Germany were struck by a series of rainfall events. We investigated the unprecedented flash flood triggered by this exceptionally heavy rainfall event (return period > 1000 years) in the 6.5 km2 Hupsel Brook catchment, which has been the experimental watershed employed by Wageningen University since the 1960s. This study improved our understanding of the dynamics of such lowland flash floods and the results have been published in HESS (Brauer et al., 2011). During this extreme event some thresholds became apparent that do not play a role during average conditions and are not incorporated in rainfall-runoff models. We present a detailed analysis of this extreme event, focusing on (1) the measured soil moisture, groundwater and discharge response of the catchment, (2) the thresholds we found, (3) the manner in which these processes and thresholds are incorporated in some well-known conceptual hydrological models and (4) how well these models are able to simulate the rainfall-runoff processes during the 2010 flash flood.

  16. Flash co-pyrolysis of biomass with plastic waste

    Energy Technology Data Exchange (ETDEWEB)

    T. Cornelissen; S. Schreurs; G. Reggers; R. Carleer; J. Yperman [Hasselt University, Diepenbeek (Belgium). Lab of Applied Chemistry

    2007-07-01

    The Global Warming, the Kyoto Protocol and the emission of greenhouse gasses such as CO{sub 2} are the topics of environmental pleadings. The world's energy supply is limited due to the depletion of fossil fuels, which are still the most important energy sources consumed. The development of new and renewable energies is the key to change. The flash pyrolysis of biomass is a promising route for the production of solid, liquid and gaseous products. A high liquid production requires very low vapour residence time to minimise secondary reactions. Flash co-pyrolytic techniques, at low temperature, provide an alternative way to dispose and convert waste (like plastics) and biomass into high value feedstock. The specific benefits of this method potentially include: the reduction of the volume of the waste, the recovery of chemicals and the replacement of fossil fuels. Co-pyrolysing of PLA (although a biologically degradable polymer, polylactic acid), with biomass (such as willow) may be an alternative waste treatment option. This research indicates that during the flash co-pyrolysis of PLA and willow (even when contaminated with high amounts of heavy metals) a synergy is attained, resulting in a higher yield of bio-oil with a lower water content. 10 refs., 1 fig.

  17. Efficacy of desvenlafaxine succinate for menopausal hot flashes.

    Science.gov (United States)

    Tella, Sri Harsha; Gallagher, John Christopher

    2014-11-01

    The concern for the development of breast cancer, stroke, cardiovascular disease and deep venous thrombosis with the use of hormonal therapy has led to the development of alternative nonhormonal forms of therapy like desvenlafaxine for the management of hot flashes. This review is based upon a PubMed search and clinical trials. The pharmacokinetics and pharmacodynamics of desvenlafaxine are reviewed. This review outlines the effects of desvenlafaxine in management of severity and frequency of vasomotor symptoms, sleep quality and quality of life in postmenopausal women. The potential adverse effects of desvenlafaxine are summarized. Based on the evidence from randomized clinical trials, desvenlafaxine is an alternate viable option for reducing the frequency and severity of hot flashes when other treatments fail. In clinical trials, it has been shown that desvenlafaxine reduced the frequency of hot flashes by 55 - 69%. In the trials so far it appears to have good safety and tolerability profile when the drug is initiated in titrating doses. The optimum dose is 100 mg/day and is to be started at 50 mg/day for 3 days and titrated to 100 mg/day. The most common adverse events reported were nausea, dry mouth, fatigue, constipation, diarrhea and somnolence.

  18. Ignition of Nanoparticles by a Compact Camera Flash

    Science.gov (United States)

    2014-09-01

    output for different power settings of a Canon 580 XE II camera  flash  as seen by the  DET36A  fast  photodiode detector.  M1/1 and M1/128 represents the...lamp at and below M1/64 output setting of the Xe‐ flash .   The curves in Figure 2 are produced by the temporal response of the DET36A  fast  photodiode...photographic applications the timescale in Figure 2 is  fast   enough at any setting, but as we will describe later the pulse duration of the Xe‐ flash

  19. Infrared Contrast Analysis Technique for Flash Thermography Nondestructive Evaluation

    Science.gov (United States)

    Koshti, Ajay

    2014-01-01

    The paper deals with the infrared flash thermography inspection to detect and analyze delamination-like anomalies in nonmetallic materials. It provides information on an IR Contrast technique that involves extracting normalized contrast verses time evolutions from the flash thermography infrared video data. The paper provides the analytical model used in the simulation of infrared image contrast. The contrast evolution simulation is achieved through calibration on measured contrast evolutions from many flat bottom holes in the subject material. The paper also provides formulas to calculate values of the thermal measurement features from the measured contrast evolution curve. Many thermal measurement features of the contrast evolution that relate to the anomaly characteristics are calculated. The measurement features and the contrast simulation are used to evaluate flash thermography inspection data in order to characterize the delamination-like anomalies. In addition, the contrast evolution prediction is matched to the measured anomaly contrast evolution to provide an assessment of the anomaly depth and width in terms of depth and diameter of the corresponding equivalent flat-bottom hole (EFBH) or equivalent uniform gap (EUG). The paper provides anomaly edge detection technique called the half-max technique which is also used to estimate width of an indication. The EFBH/EUG and half-max width estimations are used to assess anomaly size. The paper also provides some information on the "IR Contrast" software application, half-max technique and IR Contrast feature imaging application, which are based on models provided in this paper.

  20. Directed PCR-free engineering of highly repetitive DNA sequences

    Directory of Open Access Journals (Sweden)

    Preissler Steffen

    2011-09-01

    Full Text Available Abstract Background Highly repetitive nucleotide sequences are commonly found in nature e.g. in telomeres, microsatellite DNA, polyadenine (poly(A tails of eukaryotic messenger RNA as well as in several inherited human disorders linked to trinucleotide repeat expansions in the genome. Therefore, studying repetitive sequences is of biological, biotechnological and medical relevance. However, cloning of such repetitive DNA sequences is challenging because specific PCR-based amplification is hampered by the lack of unique primer binding sites resulting in unspecific products. Results For the PCR-free generation of repetitive DNA sequences we used antiparallel oligonucleotides flanked by restriction sites of Type IIS endonucleases. The arrangement of recognition sites allowed for stepwise and seamless elongation of repetitive sequences. This facilitated the assembly of repetitive DNA segments and open reading frames encoding polypeptides with periodic amino acid sequences of any desired length. By this strategy we cloned a series of polyglutamine encoding sequences as well as highly repetitive polyadenine tracts. Such repetitive sequences can be used for diverse biotechnological applications. As an example, the polyglutamine sequences were expressed as His6-SUMO fusion proteins in Escherichia coli cells to study their aggregation behavior in vitro. The His6-SUMO moiety enabled affinity purification of the polyglutamine proteins, increased their solubility, and allowed controlled induction of the aggregation process. We successfully purified the fusions proteins and provide an example for their applicability in filter retardation assays. Conclusion Our seamless cloning strategy is PCR-free and allows the directed and efficient generation of highly repetitive DNA sequences of defined lengths by simple standard cloning procedures.