repeated open application: Topics by WorldWideScience.org

Sample records for repeated open application

Clinical Utilization of Repeated Open Application Test Among American Contact Dermatitis Society Members.

Science.gov (United States)

Brown, Gabrielle E; Botto, Nina; Butler, Daniel C; Murase, Jenny E

2015-01-01

The repeated open application test (ROAT) provides useful information regarding allergens in suspected cases of allergic contact dermatitis; however, standardized methodology has not been established. The aim of this study was to assess how ROAT is used in clinical and research settings. We distributed a survey regarding ROAT practice to the American Contact Dermatitis Society and conducted a literature review of ROAT utilization in research. A total of 67 American Contact Dermatitis Society members participated in the survey. Respondents most frequently recommend application of leave-on products twice daily (46.0%) and rinse-off products once daily (43.5%). The most commonly used anatomical sites include the forearm (38.7%) and antecubital fossa (32.3%). Most respondents continue ROAT for 1 (49.2%) or 2 weeks (31.7%). Literature review of 32 studies (26 leave-on, 6 rinse-off) revealed that application frequency is most common at twice daily for both leave-on (96.2%) and rinse-off (50.0%) products. The most common anatomical site is the forearm (62.5%), with an overall study duration of 3 to 4 weeks (65.6%). When comparing ROAT clinical and research practice, the majority trend was consistent for leave-on product application frequency and anatomical site, but not for rinse-off product application frequency, or overall duration. Further research is needed to determine best practice recommendations.
Repeated interactions in open quantum systems

Energy Technology Data Exchange (ETDEWEB)

Bruneau, Laurent, E-mail: laurent.bruneau@u-cergy.fr [Laboratoire AGM, Université de Cergy-Pontoise, Site Saint-Martin, BP 222, 95302 Cergy-Pontoise (France); Joye, Alain, E-mail: Alain.Joye@ujf-grenoble.fr [Institut Fourier, UMR 5582, CNRS-Université Grenoble I, BP 74, 38402 Saint-Martin d’Hères (France); Merkli, Marco, E-mail: merkli@mun.ca [Department of Mathematics and Statistics Memorial University of Newfoundland, St. John' s, NL Canada A1C 5S7 (Canada)

2014-07-15

Analyzing the dynamics of open quantum systems has a long history in mathematics and physics. Depending on the system at hand, basic physical phenomena that one would like to explain are, for example, convergence to equilibrium, the dynamics of quantum coherences (decoherence) and quantum correlations (entanglement), or the emergence of heat and particle fluxes in non-equilibrium situations. From the mathematical physics perspective, one of the main challenges is to derive the irreversible dynamics of the open system, starting from a unitary dynamics of the system and its environment. The repeated interactions systems considered in these notes are models of non-equilibrium quantum statistical mechanics. They are relevant in quantum optics, and more generally, serve as a relatively well treatable approximation of a more difficult quantum dynamics. In particular, the repeated interaction models allow to determine the large time (stationary) asymptotics of quantum systems out of equilibrium.
iPhone Open Application Development Write Native Applications Using the Open Source Tool Chain

CERN Document Server

Zdziarski, Jonathan

2008-01-01

Developers everywhere are eager to create applications for the iPhone, and many of them prefer the open source, community-developed tool chain to Apple's own toolkit. This new edition of iPhone Open Application Development covers the latest version of the open toolkit -- now updated for Apple's iPhone 2.x software and iPhone 3G -- and explains in clear language how to create applications using Objective-C and the iPhone API.
Comparison of trial participants and open access users of a web-based physical activity intervention regarding adherence, attrition, and repeated participation.

Science.gov (United States)

Wanner, Miriam; Martin-Diener, Eva; Bauer, Georg; Braun-Fahrländer, Charlotte; Martin, Brian W

2010-02-10

Web-based interventions are popular for promoting healthy lifestyles such as physical activity. However, little is known about user characteristics, adherence, attrition, and predictors of repeated participation on open access physical activity websites. The focus of this study was Active-online, a Web-based individually tailored physical activity intervention. The aims were (1) to assess and compare user characteristics and adherence to the website (a) in the open access context over time from 2003 to 2009, and (b) between trial participants and open access users; and (2) to analyze attrition and predictors of repeated use among participants in a randomized controlled trial compared with registered open access users. Data routinely recorded in the Active-online user database were used. Adherence was defined as: the number of pages viewed, the proportion of visits during which a tailored module was begun, the proportion of visits during which tailored feedback was received, and the time spent in the tailored modules. Adherence was analyzed according to six one-year periods (2003-2009) and according to the context (trial or open access) based on first visits and longest visits. Attrition and predictors of repeated participation were compared between trial participants and open access users. The number of recorded visits per year on Active-online decreased from 42,626 in 2003-2004 to 8343 in 2008-2009 (each of six one-year time periods ran from April 23 to April 22 of the following year). The mean age of users was between 38.4 and 43.1 years in all time periods and both contexts. The proportion of women increased from 49.5% in 2003-2004 to 61.3% in 2008-2009 (Popen access users. For open access users, adherence was similar during the first and the longest visits; for trial participants, adherence was lower during the first visits and higher during the longest visits. Of registered open access users and trial participants, 25.8% and 67.3% respectively visited Active
Long-Term Safety of Repeated Blood-Brain Barrier Opening via Focused Ultrasound with Microbubbles in Non-Human Primates Performing a Cognitive Task.

Science.gov (United States)

Downs, Matthew E; Buch, Amanda; Sierra, Carlos; Karakatsani, Maria Eleni; Teichert, Tobias; Chen, Shangshang; Konofagou, Elisa E; Ferrera, Vincent P

2015-01-01

Focused Ultrasound (FUS) coupled with intravenous administration of microbubbles (MB) is a non-invasive technique that has been shown to reliably open (increase the permeability of) the blood-brain barrier (BBB) in multiple in vivo models including non-human primates (NHP). This procedure has shown promise for clinical and basic science applications, yet the safety and potential neurological effects of long term application in NHP requires further investigation under parameters shown to be efficacious in that species (500 kHz, 200-400 kPa, 4-5 μm MB, 2 minute sonication). In this study, we repeatedly opened the BBB in the caudate and putamen regions of the basal ganglia of 4 NHP using FUS with systemically-administered MB over 4-20 months. We assessed the safety of the FUS with MB procedure using MRI to detect edema or hemorrhaging in the brain. Contrast enhanced T1-weighted MRI sequences showed a 98% success rate for openings in the targeted regions. T2-weighted and SWI sequences indicated a lack edema in the majority of the cases. We investigated potential neurological effects of the FUS with MB procedure through quantitative cognitive testing of' visual, cognitive, motivational, and motor function using a random dot motion task with reward magnitude bias presented on a touchpanel display. Reaction times during the task significantly increased on the day of the FUS with MB procedure. This increase returned to baseline within 4-5 days after the procedure. Visual motion discrimination thresholds were unaffected. Our results indicate FUS with MB can be a safe method for repeated opening of the BBB at the basal ganglia in NHP for up to 20 months without any long-term negative physiological or neurological effects with the parameters used.
Effects of acute and repeated oral exposure to the organophosphate insecticide chlorpyrifos on open-field activity in chicks.

Science.gov (United States)

Al-Badrany, Y M A; Mohammad, F K

2007-11-01

The effects of the organophosphate insecticide chlorpyrifos on 5min open-field activity were examined in a 7-15 days old chick model. Chlorpyrifos was acutely administered taking into account cholinesterase inhibition and determination of the acute (24h) median lethal dose (LD50). The oral LD50 value of chlorpyrifos in chicks was 18.14mg/kg, with cholinergic toxicosis observed on intoxicated chicks. Chlorpyrifos at the dose rates of 5,10 and 20mg/kg orally produced within 2h signs of cholinergic toxicosis in the chicks and significantly inhibited plasma (40-70%), whole brain (43-69%) and liver (31-46%) cholinesterase activities in a dose-dependent manner. Chlorpyrifos at 2 and 4mg/kg, orally did not produce overt signs of cholinergic toxicosis, but decreased (30, 60 and 90min after dosing) the general locomotor activity of the chicks as seen by a significant increase in the latency to move from the central square of the open-field arena, decreases in the numbers of lines crossed and vocalization score. Repeated daily chlorpyrifos treatments (2 and 4mg/kg, orally) for seven consecutive days also caused hypoactivity in chicks in the open-field behavioral paradigm. Only the high dose of chlorpyrifos (4mg/kg, orally) given repeatedly for 7 days caused significant cholinesterase inhibition in the whole brain (37%) and the liver (22%). In conclusion, chlorpyrifos at single or short-term repeated doses-induced behavioral changes in 7-15 days old chicks, in a model that could be used for further neurobehavioral studies involving subtle effects of organophosphates on chicks.
Local toxicity of benzalkonium chloride in ophthalmic solutions following repeated applications.

Science.gov (United States)

Okahara, Akihiko; Kawazu, Kouichi

2013-01-01

We performed repeated toxicity studies of benzalkonium chloride (BAK)-containing vehicles of ophthalmic solutions in monkeys and rabbits to assess the local toxicity of BAK after repeated applications on the ocular surface. Local toxicity of BAK was evaluated by toxicity studies in which a 0.01% BAK-containing vehicle was applied twice/day for 52 weeks, 4 times/day for 39 weeks, or 6 times/day for 13 weeks, or in which a 0.005% BAK-containing vehicle was applied 6 times/day for 52 weeks or twice/day for 4 weeks in monkeys. Local toxicity of BAK was also evaluated where a 0.01% BAK-containing vehicle was applied 6 times/day for 6 weeks, or a 0.005% BAK-containing vehicle was applied twice/day for 39 weeks or 8 times/day for 4 weeks in rabbits. These doses were chosen because BAK is generally used at concentrations up to 0.01% in ophthalmic solutions. The BAK-containing vehicle did not cause ophthalmological changes suggestive of irritation, allergy, or corneal damage. We also did not observe any histopathological changes in the eyeball, eyelid, lacrimal gland, and nasal cavity, with repeated applications of BAK for up to 52 weeks, up to 8 times/day, or at concentrations up to 0.01%, in monkeys and rabbits. Our results suggest that BAK in concentrations up to 0.01% in ophthalmic solution is non-toxic to the eyeball, its accessory organs, and the nasal cavity after long repeated applications.
Genus-specific protein binding to the large clusters of DNA repeats (short regularly spaced repeats) present in Sulfolobus genomes

DEFF Research Database (Denmark)

Peng, Xu; Brügger, Kim; Shen, Biao

2003-01-01

terminally modified and corresponds to SSO454, an open reading frame of previously unassigned function. It binds specifically to DNA fragments carrying double and single repeat sequences, binding on one side of the repeat structure, and producing an opening of the opposite side of the DNA structure. It also...... recognizes both main families of repeat sequences in S. solfataricus. The recombinant protein, expressed in Escherichia coli, showed the same binding properties to the SRSR repeat as the native one. The SSO454 protein exhibits a tripartite internal repeat structure which yields a good sequence match...... with a helix-turn-helix DNA-binding motif. Although this putative motif is shared by other archaeal proteins, orthologs of SSO454 were only detected in species within the Sulfolobus genus and in the closely related Acidianus genus. We infer that the genus-specific protein induces an opening of the structure...
Evidence-based severity assessment: Impact of repeated versus single open-field testing on welfare in C57BL/6J mice.

Science.gov (United States)

Bodden, Carina; Siestrup, Sophie; Palme, Rupert; Kaiser, Sylvia; Sachser, Norbert; Richter, S Helene

2018-01-15

According to current guidelines on animal experiments, a prospective assessment of the severity of each procedure is mandatory. However, so far, the classification of procedures into different severity categories mainly relies on theoretic considerations, since it is not entirely clear which of the various procedures compromise the welfare of animals, or, to what extent. Against this background, a systematic empirical investigation of the impact of each procedure, including behavioral testing, seems essential. Therefore, the present study was designed to elucidate the effects of repeated versus single testing on mouse welfare, using one of the most commonly used paradigms for behavioral phenotyping in behavioral neuroscience, the open-field test. In an independent groups design, laboratory mice (Mus musculus f. domestica) experienced either repeated, single, or no open-field testing - procedures that are assigned to different severity categories. Interestingly, testing experiences did not affect fecal corticosterone metabolites, body weights, elevated plus-maze or home cage behavior differentially. Thus, with respect to the assessed endocrinological, physical, and behavioral outcome measures, no signs of compromised welfare could be detected in mice that were tested in the open-field repeatedly, once, or, not at all. These findings challenge current classification guidelines and may, furthermore, stimulate systematic research on the severity of single procedures involving living animals. Copyright © 2017 Elsevier B.V. All rights reserved.
Compound list: gentamicin [Open TG-GATEs

Lifescience Database Archive (English)

Full Text Available gentamicin GMC 00147 ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Rat/in_vitro/gentam...icin.Rat.in_vitro.Liver.zip ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Rat/in_vivo/Liver/Single/gentam...at/in_vivo/Liver/Repeat/gentamicin.Rat.in_vivo.Liver.Repeat.zip ftp://ftp.bioscie...ncedbc.jp/archive/open-tggates/LATEST/Rat/in_vivo/Kidney/Single/gentamicin.Rat.in_vivo.Kidney.Single.zip ftp...://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Rat/in_vivo/Kidney/Repeat/gentamicin.Rat.in_vivo.Kidney.Repeat.zip ...
Predictive Performance Tuning of OpenACC Accelerated Applications

KAUST Repository

Siddiqui, Shahzeb

2014-05-04

Graphics Processing Units (GPUs) are gradually becoming mainstream in supercomputing as their capabilities to significantly accelerate a large spectrum of scientific applications have been clearly identified and proven. Moreover, with the introduction of high level programming models such as OpenACC [1] and OpenMP 4.0 [2], these devices are becoming more accessible and practical to use by a larger scientific community. However, performance optimization of OpenACC accelerated applications usually requires an in-depth knowledge of the hardware and software specifications. We suggest a prediction-based performance tuning mechanism [3] to quickly tune OpenACC parameters for a given application to dynamically adapt to the execution environment on a given system. This approach is applied to a finite difference kernel to tune the OpenACC gang and vector clauses for mapping the compute kernels into the underlying accelerator architecture. Our experiments show a significant performance improvement against the default compiler parameters and a faster tuning by an order of magnitude compared to the brute force search tuning.
Predictive Performance Tuning of OpenACC Accelerated Applications

KAUST Repository

Siddiqui, Shahzeb; Feki, Saber

2014-01-01

, with the introduction of high level programming models such as OpenACC [1] and OpenMP 4.0 [2], these devices are becoming more accessible and practical to use by a larger scientific community. However, performance optimization of OpenACC accelerated applications usually
Rapid Application Development with OpenStudio: Preprint

Energy Technology Data Exchange (ETDEWEB)

Weaver, E.; Long, N.; Fleming, K.; Schott, M.; Benne, K.; Hale, E.

2012-05-01

This paper presents several case studies of rapidly implemented, audience-specific applications for whole building energy modeling and standards analysis. By tailoring each application to the audience and the task at hand, the required learning curve for new users was greatly reduced. Each case study used OpenStudio, the U.S. Department of Energy's middleware software development kit (SDK). OpenStudio provides an easy interface to the EnergyPlus whole building simulation engine, while extending its capability and providing higher-level functionality such as software interoperability, standards, analysis, and optimization. Each case study is unique in the technology employed to interface with OpenStudio as well as the methods used for user interaction and data presentation. Four case studies are presented.
PaaS for web applications with OpenShift Origin

OpenAIRE

Lossent, A; Rodriguez Peon, A; Wagner, A

2017-01-01

The CERN Web Frameworks team has deployed OpenShift Origin to facilitate deployment of web applications and to improving efficiency in terms of computing resource usage. OpenShift leverages Docker containers and Kubernetes orchestration to provide a Platform-as-a-service solution oriented for web applications. We will review use cases and how OpenShift was integrated with other services such as source control, web site management and authentication services.
PaaS for web applications with OpenShift Origin

Science.gov (United States)

Lossent, A.; Rodriguez Peon, A.; Wagner, A.

2017-10-01

The CERN Web Frameworks team has deployed OpenShift Origin to facilitate deployment of web applications and to improving efficiency in terms of computing resource usage. OpenShift leverages Docker containers and Kubernetes orchestration to provide a Platform-as-a-service solution oriented for web applications. We will review use cases and how OpenShift was integrated with other services such as source control, web site management and authentication services.
Governing conditions of repeatable Barkhausen noise response

International Nuclear Information System (INIS)

Stupakov, O.; Pal'a, J.; Takagi, T.; Uchimoto, T.

2009-01-01

The paper is devoted to the establishment of experimental conditions, which ensure the repeatability of magnetic Barkhausen noise testing in practice. For this task, the measurements were performed on open flat samples using different experimental configurations, including: different magnetization frequencies, sampling rates, and filter cut-off frequencies; using a sample-wrapped coil and using attached pick-up coils of various dimensions, with different lift-offs of a single yoke magnet and of the attached coil. The sample magnetization was controlled by a vertical array of three Hall sensors; their readings were extrapolated to the sample surface to precisely define its field. After analysis of the results, a scheme for an optimized sensor with a controlled field waveform was suggested to improve the measurement repeatability. The important issues of signal processing and parameter applicability were also discussed in detail.
Compound list: allyl alcohol [Open TG-GATEs

Lifescience Database Archive (English)

Full Text Available allyl alcohol AA 00010 ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Human/in_vitro/allyl_alcohol....Human.in_vitro.Liver.zip ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Rat/in_vitro/allyl_alcohol...dbc.jp/archive/open-tggates/LATEST/Rat/in_vivo/Liver/Repeat/allyl_alcohol.Rat.in_vivo.Liver.Repeat.zip ftp:/.../ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Rat/in_vivo/Kidney/Single/allyl_alcohol.Rat.in_vivo.Kidney....Single.zip ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Rat/in_vivo/Kidney/Repeat/allyl_alcohol.Rat.in_vivo.Kidney.Repeat.zip ...
46 CFR 308.521 - Application for Open Cargo Policy, Form MA-301.

Science.gov (United States)

2010-10-01

... 46 Shipping 8 2010-10-01 2010-10-01 false Application for Open Cargo Policy, Form MA-301. 308.521... RISK INSURANCE War Risk Cargo Insurance Ii-Open Policy War Risk Cargo Insurance § 308.521 Application for Open Cargo Policy, Form MA-301. The standard form of application for a War Risk Open Cargo Policy...
Open life science research, open software and the open century

Directory of Open Access Journals (Sweden)

Youhua Chen

2015-05-01

Full Text Available At the age of knowledge explosion and mass scientific information, I highlighted the importance of conducting open science in life and medical researches through the extensive usage of open software and documents. The proposal of conducting open science is to reduce the limited repeatability of researches in life science. I outlined the essential steps for conducting open life science and the necessary standards for creating, reusing and reproducing open materials. Different Creative Commons licenses were presented and compared of their usage scope and restriction. As a conclusion, I argued that open materials should be widely adopted in doing life and medical researches.
Programming Social Applications Building Viral Experiences with OpenSocial, OAuth, OpenID, and Distributed Web Frameworks

CERN Document Server

LeBlanc, Jonathan

2011-01-01

Social networking has made one thing clear: websites and applications need to provide users with experiences tailored to their preferences. This in-depth guide shows you how to build rich social frameworks, using open source technologies and specifications. You'll learn how to create third-party applications for existing sites, build engaging social graphs, and develop products to host your own socialized experience. Programming Social Apps focuses on the OpenSocial platform, along with Apache Shindig, OAuth, OpenID, and other tools, demonstrating how they work together to help you solve pra

Leveraging OpenStudio's Application Programming Interfaces: Preprint

Energy Technology Data Exchange (ETDEWEB)

Long, N.; Ball, B.; Goldwasser, D.; Parker, A.; Elling, J.; Davis, O.; Kruchten, D.

2013-11-01

OpenStudio development efforts have been focused on providing Application Programming Interfaces (APIs) where users are able to extend OpenStudio without the need to compile the open source libraries. This paper will discuss the basic purposes and functionalities of the core libraries that have been wrapped with APIs including the Building Model, Results Processing, Advanced Analysis, UncertaintyQuantification, and Data Interoperability through Translators. Several building energy modeling applications have been produced using OpenStudio's API and Software Development Kits (SDK) including the United States Department of Energy's Asset ScoreCalculator, a mobile-based audit tool, an energy design assistance reporting protocol, and a portfolio scale incentive optimization analysismethodology. Each of these software applications will be discussed briefly and will describe how the APIs were leveraged for various uses including high-level modeling, data transformations from detailed building audits, error checking/quality assurance of models, and use of high-performance computing for mass simulations.
Open Admissions: A Bibliography for Research and Application.

Science.gov (United States)

Shrier, Irene; Lavin, David E.

This bibliography presents materials for research and application of open admissions policies in higher education. Sections cover: open admissions; factors influencing high school graduates to attend college; disadvantaged and minority students; precollege and special programs; English and reading skills; general compensatory programs; dropouts;…
Effect of repeated applications of buprofezin and acephate on soil cellulases, amylase, and invertase.

Science.gov (United States)

Raju, M Naga; Venkateswarlu, K

2014-10-01

The impact of repeated applications of buprofezin and acephate, at concentrations ranging from 0.25 to 1.0 kg ha(-1), on activities of cellulases, amylase, and invertase in unamended and nitrogen, phosphorous, and potassium (NPK) fertilizer-amended soil planted with cotton was studied. The nontarget effect of selected insecticides, when applied once, twice, or thrice on soil enzyme activities, was dose-dependent; the activities decreased with increasing concentrations of insecticides. However, there was a rapid decline in activities of enzymes after three repeated applications of insecticides in unamended or NPK-amended soil. Our data clearly suggest that insecticides must be applied judiciously in pest management in order to protect the enzymes largely implicated in soil fertility.
Repeated application of organic waste affects soil organic matter composition

DEFF Research Database (Denmark)

Peltre, Clément; Gregorich, Edward G.; Bruun, Sander

2017-01-01

Land application of organic waste is an important alternative to landfilling and incineration because it helps restore soil fertility and has environmental and agronomic benefits. These benefits may be related to the biochemical composition of the waste, which can result in the accumulation...... of different types of carbon compounds in soil. The objective of this study was to identify and characterise changes in soil organic matter (SOM) composition after repeated applications of organic waste. Soil from the CRUCIAL field experiment in Denmark was sampled after 12 years of annual application...... that there was accumulation in soil of different C compounds for the different types of applied organic waste, which appeared to be related to the degree to which microbial activity was stimulated and the type of microbial communities applied with the wastes or associated with the decomposition of applied wastes...
Compound list: haloperidol [Open TG-GATEs

Lifescience Database Archive (English)

Full Text Available haloperidol HPL 00036 ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Human/in_vitro/haloperidol....Human.in_vitro.Liver.zip ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Rat/in_vitro/haloperidol....Rat.in_vitro.Liver.zip ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Rat/in_vivo/Liver/Single/haloperidol...archive/open-tggates/LATEST/Rat/in_vivo/Liver/Repeat/haloperidol.Rat.in_vivo.Liver.Repeat.zip ...
Compound list: diltiazem [Open TG-GATEs

Lifescience Database Archive (English)

Full Text Available diltiazem DIL 00092 ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Human/in_vitro/diltia...zem.Human.in_vitro.Liver.zip ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Rat/in_vitro/diltia...zem.Rat.in_vitro.Liver.zip ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Rat/in_vivo/Liver/Single/diltia...open-tggates/LATEST/Rat/in_vivo/Liver/Repeat/diltiazem.Rat.in_vivo.Liver.Repeat.zip ...
Compound list: tamoxifen [Open TG-GATEs

Lifescience Database Archive (English)

Full Text Available tamoxifen TMX 00054 ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Human/in_vitro/tam...oxifen.Human.in_vitro.Liver.zip ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Rat/in_vitro/tam...oxifen.Rat.in_vitro.Liver.zip ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Rat/in_vivo/Liver/Single/tam...open-tggates/LATEST/Rat/in_vivo/Liver/Repeat/tamoxifen.Rat.in_vivo.Liver.Repeat.zip ...
Compound list: papaverine [Open TG-GATEs

Lifescience Database Archive (English)

Full Text Available papaverine PAP 00098 ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Human/in_vitro/papaverine.Human.in_vitro.Liver.zip ftp://ftp....biosciencedbc.jp/archive/open-tggates/LATEST/Rat/in_vitro/papa...verine.Rat.in_vitro.Liver.zip ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Rat/in_vivo/Liver/Single/papa...ive/open-tggates/LATEST/Rat/in_vivo/Liver/Repeat/papaverine.Rat.in_vivo.Liver.Repeat.zip ...
Compound list: gemfibrozil [Open TG-GATEs

Lifescience Database Archive (English)

Full Text Available gemfibrozil GFZ 00031 ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Human/in_vitro/gemfibrozil....Human.in_vitro.Liver.zip ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Rat/in_vitro/gemfibrozil....Rat.in_vitro.Liver.zip ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Rat/in_vivo/Liver/Single/gemfibrozil...archive/open-tggates/LATEST/Rat/in_vivo/Liver/Repeat/gemfibrozil.Rat.in_vivo.Liver.Repeat.zip ...
Compound list: terbinafine [Open TG-GATEs

Lifescience Database Archive (English)

Full Text Available terbinafine TBF 00123 ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Human/in_vitro/terbinafine....Human.in_vitro.Liver.zip ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Rat/in_vitro/terbinafine....Rat.in_vitro.Liver.zip ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Rat/in_vivo/Liver/Single/terbinafine...archive/open-tggates/LATEST/Rat/in_vivo/Liver/Repeat/terbinafine.Rat.in_vivo.Liver.Repeat.zip ...
Compound list: triazolam [Open TG-GATEs

Lifescience Database Archive (English)

Full Text Available triazolam TZM 00120 ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Human/in_vitro/triazolam.Human.in_vitro.Liver.zip ftp://ftp.bi...osciencedbc.jp/archive/open-tggates/LATEST/Rat/in_vitro/triazolam....Rat.in_vitro.Liver.zip ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Rat/in_vivo/Liver/Single/triazolam...open-tggates/LATEST/Rat/in_vivo/Liver/Repeat/triazolam.Rat.in_vivo.Liver.Repeat.zip ...
Sign Language Translator Application Using OpenCV

Science.gov (United States)

Triyono, L.; Pratisto, E. H.; Bawono, S. A. T.; Purnomo, F. A.; Yudhanto, Y.; Raharjo, B.

2018-03-01

This research focuses on the development of sign language translator application using OpenCV Android based, this application is based on the difference in color. The author also utilizes Support Machine Learning to predict the label. Results of the research showed that the coordinates of the fingertip search methods can be used to recognize a hand gesture to the conditions contained open arms while to figure gesture with the hand clenched using search methods Hu Moments value. Fingertip methods more resilient in gesture recognition with a higher success rate is 95% on the distance variation is 35 cm and 55 cm and variations of light intensity of approximately 90 lux and 100 lux and light green background plain condition compared with the Hu Moments method with the same parameters and the percentage of success of 40%. While the background of outdoor environment applications still can not be used with a success rate of only 6 managed and the rest failed.
Compound list: fluphenazine [Open TG-GATEs

Lifescience Database Archive (English)

Full Text Available fluphenazine FP 00037 ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Human/in_vitro/flu...phenazine.Human.in_vitro.Liver.zip ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Rat/in_vitro/flu...phenazine.Rat.in_vitro.Liver.zip ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Rat/in_vivo/Liver/Single/flu...jp/archive/open-tggates/LATEST/Rat/in_vivo/Liver/Repeat/fluphenazine.Rat.in_vivo.Liver.Repeat.zip ...
Compound list: amitriptyline [Open TG-GATEs

Lifescience Database Archive (English)

Full Text Available amitriptyline AMT 00070 ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Human/in_vitro/amit...riptyline.Human.in_vitro.Liver.zip ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Rat/in_vitro/amit...riptyline.Rat.in_vitro.Liver.zip ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Rat/in_vivo/Liver/Single/amit...edbc.jp/archive/open-tggates/LATEST/Rat/in_vivo/Liver/Repeat/amitriptyline.Rat.in_vivo.Liver.Repeat.zip ...
Compound list: furosemide [Open TG-GATEs

Lifescience Database Archive (English)

Full Text Available furosemide FUR 00078 ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Human/in_vitro/furose...mide.Human.in_vitro.Liver.zip ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Rat/in_vitro/furose...mide.Rat.in_vitro.Liver.zip ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Rat/in_vivo/Liver/Single/furose...ive/open-tggates/LATEST/Rat/in_vivo/Liver/Repeat/furosemide.Rat.in_vivo.Liver.Repeat.zip ...
Compound list: benzbromarone [Open TG-GATEs

Lifescience Database Archive (English)

Full Text Available benzbromarone BBr 00021 ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Human/in_vitro/benz...bromarone.Human.in_vitro.Liver.zip ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Rat/in_vitro/benz...bromarone.Rat.in_vitro.Liver.zip ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Rat/in_vivo/Liver/Single/benz...edbc.jp/archive/open-tggates/LATEST/Rat/in_vivo/Liver/Repeat/benzbromarone.Rat.in_vivo.Liver.Repeat.zip ...
Compound list: tolbutamide [Open TG-GATEs

Lifescience Database Archive (English)

Full Text Available tolbutamide TLB 00114 ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Human/in_vitro/tolbutam...ide.Human.in_vitro.Liver.zip ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Rat/in_vitro/tolbutam...ide.Rat.in_vitro.Liver.zip ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Rat/in_vivo/Liver/Single/tolbutam...archive/open-tggates/LATEST/Rat/in_vivo/Liver/Repeat/tolbutamide.Rat.in_vivo.Liver.Repeat.zip ...
Application Period Open for NCI Biospecimen Use | Division of Cancer Prevention

Science.gov (United States)

The application period for investigators interested in obtaining biospecimens and data from the Prostate, Lung, Colorectal and Ovarian (PLCO) Cancer Screening Trial re-opened June 1. A separate application for obtaining biospecimens and data with research funding is also open. |
Compound list: acetamide [Open TG-GATEs

Lifescience Database Archive (English)

Full Text Available acetamide AAA 00169 ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Human/in_vitro/acetam...ide.Human.in_vitro.Liver.zip ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Rat/in_vivo/Liver/Repeat/acetamide.Rat.in_vivo.Liver.Repeat.zip ...
Twenty-three generations of mice bidirectionally selected for open-field thigmotaxis: selection response and repeated exposure to the open field.

Science.gov (United States)

Leppänen, Pia K; Ravaja, N; Ewalds-Kvist, S B M

2006-03-01

We examined: (a) the response to bidirectional selection for open-field (OF) thigmotaxis in mice for 23 generations and (b) the effects of repeated exposure (during 5 days) on different OF behaviors in the selectively bred high OF thigmotaxis (HOFT) and low OF thigmotaxis (LOFT) mice. A total of 2049 mice were used in the study. Prior to the testing in the selection experiment, the mice were exposed to the OF apparatus for approximately 2 min on each of 4 consecutive days. Thus, the selection was based on the scores registered on the 5th day after the four habituation periods. The HOFT mice were more thigmotactic than the LOFT mice in almost each generation. The HOFT mice also tended to rear less than the LOFT mice, which was explained by the inverse relationship between emotionality and exploratory tendencies. The lines did not generally differ in ambulation. Sex differences were found in thigmotaxis, ambulation, and rearing. In the repeated exposure experiment, the development of nine different OF behaviors across the 5 days of testing was addressed. Both lines ambulated, explored, and reared most on the 1st, 4th, and 5th days. Grooming and radial latency decreased and thigmotaxis increased linearly across the testing days. Line differences were found in ambulation, exploration, grooming, and rearing, while sex differences were manifested in ambulation and exploration. The line difference in thigmotaxis was evident only on the 5th day. Temporal changes were partially at variance with the general assumptions. OF thigmotaxis was found to be a powerful characteristic for producing two diverging lines of mice.

Compound list: acetaminophen [Open TG-GATEs

Lifescience Database Archive (English)

Full Text Available acetaminophen APAP 00001 ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Human/in_vitro/acetam...inophen.Human.in_vitro.Liver.zip ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Rat/in_vitro/acetam...inophen.Rat.in_vitro.Liver.zip ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Rat/i...cedbc.jp/archive/open-tggates/LATEST/Rat/in_vivo/Liver/Repeat/acetaminophen.Rat.in_vivo.Liver.Repeat.zip ftp...://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Rat/in_vivo/Kidney/Single/acetaminophen.Rat.in_vivo.Kidn
Compound list: ketoconazole [Open TG-GATEs

Lifescience Database Archive (English)

Full Text Available ketoconazole KC 00047 ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Human/in_vitro/ketoco...nazole.Human.in_vitro.Liver.zip ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Rat/in_vitro/ketoco...nazole.Rat.in_vitro.Liver.zip ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Rat/in_vivo/Liver/Single/ketoco...jp/archive/open-tggates/LATEST/Rat/in_vivo/Liver/Repeat/ketoconazole.Rat.in_vivo.Liver.Repeat.zip ftp://ftp....biosciencedbc.jp/archive/open-tggates/LATEST/Rat/in_vivo/Kidney/Single/ketoconazole.Rat.in_vivo.Kidney.Singl
Compound list: chlorpheniramine [Open TG-GATEs

Lifescience Database Archive (English)

Full Text Available chlorpheniramine CHL 00090 ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Human/in_vitro/chlorpheni...ramine.Human.in_vitro.Liver.zip ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATE...ST/Rat/in_vivo/Liver/Single/chlorpheniramine.Rat.in_vivo.Liver.Single.zip ftp://f...tp.biosciencedbc.jp/archive/open-tggates/LATEST/Rat/in_vivo/Liver/Repeat/chlorpheniramine.Rat.in_vivo.Liver.Repeat.zip ...
Compound list: chloramphenicol [Open TG-GATEs

Lifescience Database Archive (English)

Full Text Available chloramphenicol CMP 00064 ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Human/in_vitro/chlorampheni...col.Human.in_vitro.Liver.zip ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST...Rat/in_vivo/Liver/Single/chloramphenicol.Rat.in_vivo.Liver.Single.zip ftp://ftp.b...iosciencedbc.jp/archive/open-tggates/LATEST/Rat/in_vivo/Liver/Repeat/chloramphenicol.Rat.in_vivo.Liver.Repeat.zip ...
Compound list: chlorpromazine [Open TG-GATEs

Lifescience Database Archive (English)

Full Text Available chlorpromazine CPZ 00016 ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Hum...an/in_vitro/chlorpromazine.Human.in_vitro.Liver.zip ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/R.../in_vivo/Liver/Single/chlorpromazine.Rat.in_vivo.Liver.Single.zip ftp://ftp.biosc...iencedbc.jp/archive/open-tggates/LATEST/Rat/in_vivo/Liver/Repeat/chlorpromazine.Rat.in_vivo.Liver.Repeat.zip ...
Compound list: clomipramine [Open TG-GATEs

Lifescience Database Archive (English)

Full Text Available clomipramine CPM 00121 ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Human/in_vitro/clomipramine....Human.in_vitro.Liver.zip ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Rat/in_vitro/clomipramine...vo/Liver/Single/clomipramine.Rat.in_vivo.Liver.Single.zip ftp://ftp.biosciencedbc....jp/archive/open-tggates/LATEST/Rat/in_vivo/Liver/Repeat/clomipramine.Rat.in_vivo.Liver.Repeat.zip ...
Compound list: promethazine [Open TG-GATEs

Lifescience Database Archive (English)

Full Text Available promethazine PMZ 00110 ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Human/in_vitro/promethazine....Human.in_vitro.Liver.zip ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Rat/in_vitro/promethazine...vo/Liver/Single/promethazine.Rat.in_vivo.Liver.Single.zip ftp://ftp.biosciencedbc....jp/archive/open-tggates/LATEST/Rat/in_vivo/Liver/Repeat/promethazine.Rat.in_vivo.Liver.Repeat.zip ...
Compound list: penicillamine [Open TG-GATEs

Lifescience Database Archive (English)

Full Text Available penicillamine PEN 00099 ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Human/in_vitro/penicillamine....Human.in_vitro.Liver.zip ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Rat/in_vitro/penicillamine..._vivo/Liver/Single/penicillamine.Rat.in_vivo.Liver.Single.zip ftp://ftp.bioscienc...edbc.jp/archive/open-tggates/LATEST/Rat/in_vivo/Liver/Repeat/penicillamine.Rat.in_vivo.Liver.Repeat.zip ...
Compound list: glibenclamide [Open TG-GATEs

Lifescience Database Archive (English)

Full Text Available glibenclamide GBC 00042 ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Human/in_vitro/glibenclam...ide.Human.in_vitro.Liver.zip ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Rat/in_vitro/glibenclam..._vivo/Liver/Single/glibenclamide.Rat.in_vivo.Liver.Single.zip ftp://ftp.bioscienc...edbc.jp/archive/open-tggates/LATEST/Rat/in_vivo/Liver/Repeat/glibenclamide.Rat.in_vivo.Liver.Repeat.zip ...
Compound list: nitrosodiethylamine [Open TG-GATEs

Lifescience Database Archive (English)

Full Text Available nitrosodiethylamine DEN 00145 ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATES...s/LATEST/Rat/in_vitro/nitrosodiethylamine.Rat.in_vitro.Liver.zip ftp://ftp.biosciencedbc.jp/archive/open-tgg...ates/LATEST/Rat/in_vivo/Liver/Single/nitrosodiethylamine.Rat.in_vivo.Liver.Single....zip ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Rat/in_vivo/Liver/Repeat/nitrosodiethylamine.Rat.in_vivo.Liver.Repeat.zip ... ...T/Human/in_vitro/nitrosodiethylamine.Human.in_vitro.Liver.zip ftp://ftp.biosciencedbc.jp/archive/open-tggate
Compound list: aspirin [Open TG-GATEs

Lifescience Database Archive (English)

Full Text Available aspirin ASA 00014 ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Human/in_vitro/aspirin....Human.in_vitro.Liver.zip ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Rat/in_vitro/aspirin....Rat.in_vitro.Liver.zip ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Rat/in_vivo/Liver/Single/aspirin....Rat.in_vivo.Liver.Single.zip ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Rat/in_vivo/Liver/Repeat/aspirin.Rat.in_vivo.Liver.Repeat.zip ...
Compound list: doxorubicin [Open TG-GATEs

Lifescience Database Archive (English)

Full Text Available doxorubicin DOX 00149 ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Human/...in_vitro/doxorubicin.Human.in_vitro.Liver.zip ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Rat/in_...vitro/doxorubicin.Rat.in_vitro.Liver.zip ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Rat/in_vivo/...Liver/Single/doxorubicin.Rat.in_vivo.Liver.Single.zip ftp://ftp.biosciencedbc.jp/...archive/open-tggates/LATEST/Rat/in_vivo/Liver/Repeat/doxorubicin.Rat.in_vivo.Liver.Repeat.zip ftp://ftp.bios
Compound list: ethanol [Open TG-GATEs

Lifescience Database Archive (English)

Full Text Available ethanol ETN 00137 ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Human/in_v...itro/ethanol.Human.in_vitro.Liver.zip ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Rat/in_vitro/et...hanol.Rat.in_vitro.Liver.zip ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Rat/in_vivo/Liver/Single.../ethanol.Rat.in_vivo.Liver.Single.zip ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Rat/in_vivo/Liver/Repeat/ethanol.Rat.in_vivo.Liver.Repeat.zip ...
Compound list: adapin [Open TG-GATEs

Lifescience Database Archive (English)

Full Text Available adapin ADP 00039 ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Human/in_vi...tro/adapin.Human.in_vitro.Liver.zip ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Rat/in_vitro/adap...in.Rat.in_vitro.Liver.zip ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Rat/in_vivo/Liver/Single/ad...apin.Rat.in_vivo.Liver.Single.zip ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Rat/in_vivo/Liver/Repeat/adapin.Rat.in_vivo.Liver.Repeat.zip ...
Compound list: danazol [Open TG-GATEs

Lifescience Database Archive (English)

Full Text Available danazol DNZ 00127 ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Human/in_v...itro/danazol.Human.in_vitro.Liver.zip ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Rat/in_vitro/da...nazol.Rat.in_vitro.Liver.zip ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Rat/in_vivo/Liver/Single.../danazol.Rat.in_vivo.Liver.Single.zip ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Rat/in_vivo/Liver/Repeat/danazol.Rat.in_vivo.Liver.Repeat.zip ...
Compound list: allopurinol [Open TG-GATEs

Lifescience Database Archive (English)

Full Text Available allopurinol APL 00028 ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Human/...in_vitro/allopurinol.Human.in_vitro.Liver.zip ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Rat/in_...vitro/allopurinol.Rat.in_vitro.Liver.zip ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Rat/in_vivo/...Liver/Single/allopurinol.Rat.in_vivo.Liver.Single.zip ftp://ftp.biosciencedbc.jp/...archive/open-tggates/LATEST/Rat/in_vivo/Liver/Repeat/allopurinol.Rat.in_vivo.Liver.Repeat.zip ftp://ftp.bios
Compound list: ciprofloxacin [Open TG-GATEs

Lifescience Database Archive (English)

Full Text Available ciprofloxacin CPX 00050 ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Huma...n/in_vitro/ciprofloxacin.Human.in_vitro.Liver.zip ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Rat.../in_vitro/ciprofloxacin.Rat.in_vitro.Liver.zip ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Rat/in..._vivo/Liver/Single/ciprofloxacin.Rat.in_vivo.Liver.Single.zip ftp://ftp.bioscienc...edbc.jp/archive/open-tggates/LATEST/Rat/in_vivo/Liver/Repeat/ciprofloxacin.Rat.in_vivo.Liver.Repeat.zip ftp:
Compound list: tacrine [Open TG-GATEs

Lifescience Database Archive (English)

Full Text Available tacrine TAC 00060 ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Human/in_v...itro/tacrine.Human.in_vitro.Liver.zip ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Rat/in_vitro/ta...crine.Rat.in_vitro.Liver.zip ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Rat/in_vivo/Liver/Single.../tacrine.Rat.in_vivo.Liver.Single.zip ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Rat/in_vivo/Liver/Repeat/tacrine.Rat.in_vivo.Liver.Repeat.zip ...
Compound list: monocrotaline [Open TG-GATEs

Lifescience Database Archive (English)

Full Text Available monocrotaline MCT 00058 ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Huma...n/in_vitro/monocrotaline.Human.in_vitro.Liver.zip ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Rat.../in_vitro/monocrotaline.Rat.in_vitro.Liver.zip ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Rat/in..._vivo/Liver/Single/monocrotaline.Rat.in_vivo.Liver.Single.zip ftp://ftp.bioscienc...edbc.jp/archive/open-tggates/LATEST/Rat/in_vivo/Liver/Repeat/monocrotaline.Rat.in_vivo.Liver.Repeat.zip ftp:
Dynamics of soil bacterial communities in response to repeated application of manure containing sulfadiazine.

Science.gov (United States)

Ding, Guo-Chun; Radl, Viviane; Schloter-Hai, Brigitte; Jechalke, Sven; Heuer, Holger; Smalla, Kornelia; Schloter, Michael

2014-01-01

Large amounts of manure have been applied to arable soils as fertilizer worldwide. Manure is often contaminated with veterinary antibiotics which enter the soil together with antibiotic resistant bacteria. However, little information is available regarding the main responders of bacterial communities in soil affected by repeated inputs of antibiotics via manure. In this study, a microcosm experiment was performed with two concentrations of the antibiotic sulfadiazine (SDZ) which were applied together with manure at three different time points over a period of 133 days. Samples were taken 3 and 60 days after each manure application. The effects of SDZ on soil bacterial communities were explored by barcoded pyrosequencing of 16S rRNA gene fragments amplified from total community DNA. Samples with high concentration of SDZ were analyzed on day 193 only. Repeated inputs of SDZ, especially at a high concentration, caused pronounced changes in bacterial community compositions. By comparison with the initial soil, we could observe an increase of the disturbance and a decrease of the stability of soil bacterial communities as a result of SDZ manure application compared to the manure treatment without SDZ. The number of taxa significantly affected by the presence of SDZ increased with the times of manure application and was highest during the treatment with high SDZ-concentration. Numerous taxa, known to harbor also human pathogens, such as Devosia, Shinella, Stenotrophomonas, Clostridium, Peptostreptococcus, Leifsonia, Gemmatimonas, were enriched in the soil when SDZ was present while the abundance of bacteria which typically contribute to high soil quality belonging to the genera Pseudomonas and Lysobacter, Hydrogenophaga, and Adhaeribacter decreased in response to the repeated application of manure and SDZ.

Dynamics of soil bacterial communities in response to repeated application of manure containing sulfadiazine.

Directory of Open Access Journals (Sweden)

Guo-Chun Ding

Full Text Available Large amounts of manure have been applied to arable soils as fertilizer worldwide. Manure is often contaminated with veterinary antibiotics which enter the soil together with antibiotic resistant bacteria. However, little information is available regarding the main responders of bacterial communities in soil affected by repeated inputs of antibiotics via manure. In this study, a microcosm experiment was performed with two concentrations of the antibiotic sulfadiazine (SDZ which were applied together with manure at three different time points over a period of 133 days. Samples were taken 3 and 60 days after each manure application. The effects of SDZ on soil bacterial communities were explored by barcoded pyrosequencing of 16S rRNA gene fragments amplified from total community DNA. Samples with high concentration of SDZ were analyzed on day 193 only. Repeated inputs of SDZ, especially at a high concentration, caused pronounced changes in bacterial community compositions. By comparison with the initial soil, we could observe an increase of the disturbance and a decrease of the stability of soil bacterial communities as a result of SDZ manure application compared to the manure treatment without SDZ. The number of taxa significantly affected by the presence of SDZ increased with the times of manure application and was highest during the treatment with high SDZ-concentration. Numerous taxa, known to harbor also human pathogens, such as Devosia, Shinella, Stenotrophomonas, Clostridium, Peptostreptococcus, Leifsonia, Gemmatimonas, were enriched in the soil when SDZ was present while the abundance of bacteria which typically contribute to high soil quality belonging to the genera Pseudomonas and Lysobacter, Hydrogenophaga, and Adhaeribacter decreased in response to the repeated application of manure and SDZ.
Dynamics of Soil Bacterial Communities in Response to Repeated Application of Manure Containing Sulfadiazine

Science.gov (United States)

Ding, Guo-Chun; Radl, Viviane; Schloter-Hai, Brigitte; Jechalke, Sven; Heuer, Holger; Smalla, Kornelia; Schloter, Michael

2014-01-01

Large amounts of manure have been applied to arable soils as fertilizer worldwide. Manure is often contaminated with veterinary antibiotics which enter the soil together with antibiotic resistant bacteria. However, little information is available regarding the main responders of bacterial communities in soil affected by repeated inputs of antibiotics via manure. In this study, a microcosm experiment was performed with two concentrations of the antibiotic sulfadiazine (SDZ) which were applied together with manure at three different time points over a period of 133 days. Samples were taken 3 and 60 days after each manure application. The effects of SDZ on soil bacterial communities were explored by barcoded pyrosequencing of 16S rRNA gene fragments amplified from total community DNA. Samples with high concentration of SDZ were analyzed on day 193 only. Repeated inputs of SDZ, especially at a high concentration, caused pronounced changes in bacterial community compositions. By comparison with the initial soil, we could observe an increase of the disturbance and a decrease of the stability of soil bacterial communities as a result of SDZ manure application compared to the manure treatment without SDZ. The number of taxa significantly affected by the presence of SDZ increased with the times of manure application and was highest during the treatment with high SDZ-concentration. Numerous taxa, known to harbor also human pathogens, such as Devosia, Shinella, Stenotrophomonas, Clostridium, Peptostreptococcus, Leifsonia, Gemmatimonas, were enriched in the soil when SDZ was present while the abundance of bacteria which typically contribute to high soil quality belonging to the genera Pseudomonas and Lysobacter, Hydrogenophaga, and Adhaeribacter decreased in response to the repeated application of manure and SDZ. PMID:24671113
A framework for integration of scientific applications into the OpenTopography workflow

Science.gov (United States)

Nandigam, V.; Crosby, C.; Baru, C.

2012-12-01

The NSF-funded OpenTopography facility provides online access to Earth science-oriented high-resolution LIDAR topography data, online processing tools, and derivative products. The underlying cyberinfrastructure employs a multi-tier service oriented architecture that is comprised of an infrastructure tier, a processing services tier, and an application tier. The infrastructure tier consists of storage, compute resources as well as supporting databases. The services tier consists of the set of processing routines each deployed as a Web service. The applications tier provides client interfaces to the system. (e.g. Portal). We propose a "pluggable" infrastructure design that will allow new scientific algorithms and processing routines developed and maintained by the community to be integrated into the OpenTopography system so that the wider earth science community can benefit from its availability. All core components in OpenTopography are available as Web services using a customized open-source Opal toolkit. The Opal toolkit provides mechanisms to manage and track job submissions, with the help of a back-end database. It allows monitoring of job and system status by providing charting tools. All core components in OpenTopography have been developed, maintained and wrapped as Web services using Opal by OpenTopography developers. However, as the scientific community develops new processing and analysis approaches this integration approach is not scalable efficiently. Most of the new scientific applications will have their own active development teams performing regular updates, maintenance and other improvements. It would be optimal to have the application co-located where its developers can continue to actively work on it while still making it accessible within the OpenTopography workflow for processing capabilities. We will utilize a software framework for remote integration of these scientific applications into the OpenTopography system. This will be accomplished by
Compound list: flutamide [Open TG-GATEs

Lifescience Database Archive (English)

Full Text Available flutamide FT 00044 ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Human/in_vitro/flutam...ide.Human.in_vitro.Liver.zip ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Rat/in_vitro/flutam...ide.Rat.in_vitro.Liver.zip ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Rat/in_vivo/Liver/Single/flutam...pen-tggates/LATEST/Rat/in_vivo/Liver/Repeat/flutamide.Rat.in_vivo.Liver.Repeat.zip ...
Compound list: acetamidofluorene [Open TG-GATEs

Lifescience Database Archive (English)

Full Text Available acetamidofluorene AAF 00144 ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Human/in_vitro/acetam...idofluorene.Human.in_vitro.Liver.zip ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Rat/in_vitro/acetam...ATEST/Rat/in_vivo/Liver/Single/acetamidofluorene.Rat.in_vivo.Liver.Single.zip ftp...://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Rat/in_vivo/Liver/Repeat/acetamidofluorene.Rat.in_vivo.Liver.Repeat.zip ...
Compound list: diazepam [Open TG-GATEs

Lifescience Database Archive (English)

Full Text Available diazepam DZP 00023 ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Human/in_vitro/diaz...epam.Human.in_vitro.Liver.zip ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Rat/in_vitro/diaz...epam.Rat.in_vitro.Liver.zip ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Rat/in_vivo/Liver/Single/diaz...-tggates/LATEST/Rat/in_vivo/Liver/Repeat/diazepam.Rat.in_vivo.Liver.Repeat.zip ...
Compound list: coumarin [Open TG-GATEs

Lifescience Database Archive (English)

Full Text Available coumarin CMA 00027 ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Human/in_vitro/coumari...n.Human.in_vitro.Liver.zip ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Rat/in_vitro/coumari...n.Rat.in_vitro.Liver.zip ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Rat/in_vivo/Liver/Single/coumari...-tggates/LATEST/Rat/in_vivo/Liver/Repeat/coumarin.Rat.in_vivo.Liver.Repeat.zip ...
Compound list: methyltestosterone [Open TG-GATEs

Lifescience Database Archive (English)

Full Text Available methyltestosterone MTS 00041 ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Human/in_vitro/methyltes...LATEST/Rat/in_vitro/methyltestosterone.Rat.in_vitro.Liver.zip ftp://ftp.biosciencedbc.jp/archive/open-tggate...s/LATEST/Rat/in_vivo/Liver/Single/methyltestosterone.Rat.in_vivo.Liver.Single.zip... ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Rat/in_vivo/Liver/Repeat/methyltestosterone.Rat.in_v...ivo.Liver.Repeat.zip ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Rat/in_vivo/Kidney/Single/methyltest
Compound list: thioacetamide [Open TG-GATEs

Lifescience Database Archive (English)

Full Text Available thioacetamide TAA 00017 ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Human/in_vitro/thioacetamide.Human.in_vitro.Liver.zip ftp:...//ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Rat/in_vitro/thioacetam..._vivo/Liver/Single/thioacetamide.Rat.in_vivo.Liver.Single.zip ftp://ftp.bioscienc...edbc.jp/archive/open-tggates/LATEST/Rat/in_vivo/Liver/Repeat/thioacetamide.Rat.in_vivo.Liver.Repeat.zip ftp:...//ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Rat/in_vivo/Kidney/Single/thioacetamide.Rat.in_vivo.Kidne
Compound list: phenacetin [Open TG-GATEs

Lifescience Database Archive (English)

Full Text Available phenacetin PCT 00138 ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Human/i...n_vitro/phenacetin.Human.in_vitro.Liver.zip ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Rat/in_vi...tro/phenacetin.Rat.in_vitro.Liver.zip ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Rat/in_vivo/Liv...er/Single/phenacetin.Rat.in_vivo.Liver.Single.zip ftp://ftp.biosciencedbc.jp/arch...ive/open-tggates/LATEST/Rat/in_vivo/Liver/Repeat/phenacetin.Rat.in_vivo.Liver.Repeat.zip ftp://ftp.bioscienc
Compound list: imipramine [Open TG-GATEs

Lifescience Database Archive (English)

Full Text Available imipramine IMI 00069 ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Human/i...n_vitro/imipramine.Human.in_vitro.Liver.zip ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Rat/in_vi...tro/imipramine.Rat.in_vitro.Liver.zip ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Rat/in_vivo/Liv...er/Single/imipramine.Rat.in_vivo.Liver.Single.zip ftp://ftp.biosciencedbc.jp/arch...ive/open-tggates/LATEST/Rat/in_vivo/Liver/Repeat/imipramine.Rat.in_vivo.Liver.Repeat.zip ftp://ftp.bioscienc
Compound list: ethinylestradiol [Open TG-GATEs

Lifescience Database Archive (English)

Full Text Available ethinylestradiol EE 00055 ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Hu...man/in_vitro/ethinylestradiol.Human.in_vitro.Liver.zip ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATES...T/Rat/in_vitro/ethinylestradiol.Rat.in_vitro.Liver.zip ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATES...T/Rat/in_vivo/Liver/Single/ethinylestradiol.Rat.in_vivo.Liver.Single.zip ftp://ft...p.biosciencedbc.jp/archive/open-tggates/LATEST/Rat/in_vivo/Liver/Repeat/ethinylestradiol.Rat.in_vivo.Liver.Repeat.zip ftp:
Compound list: carboplatin [Open TG-GATEs

Lifescience Database Archive (English)

Full Text Available carboplatin CBP 00133 ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Rat/in..._vitro/carboplatin.Rat.in_vitro.Liver.zip ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Rat/in_vivo.../Liver/Single/carboplatin.Rat.in_vivo.Liver.Single.zip ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATES...T/Rat/in_vivo/Liver/Repeat/carboplatin.Rat.in_vivo.Liver.Repeat.zip ftp://ftp.bio...sciencedbc.jp/archive/open-tggates/LATEST/Rat/in_vivo/Kidney/Single/carboplatin.Rat.in_vivo.Kidney.Single.zip ftp:
Compound list: cephalothin [Open TG-GATEs

Lifescience Database Archive (English)

Full Text Available cephalothin CLT 00141 ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Rat/in..._vitro/cephalothin.Rat.in_vitro.Liver.zip ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Rat/in_vivo.../Liver/Single/cephalothin.Rat.in_vivo.Liver.Single.zip ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATES...T/Rat/in_vivo/Liver/Repeat/cephalothin.Rat.in_vivo.Liver.Repeat.zip ftp://ftp.bio...sciencedbc.jp/archive/open-tggates/LATEST/Rat/in_vivo/Kidney/Single/cephalothin.Rat.in_vivo.Kidney.Single.zip ftp:
Compound list: omeprazole [Open TG-GATEs

Lifescience Database Archive (English)

Full Text Available omeprazole OPZ 00012 ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Human/i...n_vitro/omeprazole.Human.in_vitro.Liver.zip ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Rat/in_vi...tro/omeprazole.Rat.in_vitro.Liver.zip ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Rat/in_vivo/Liv...er/Single/omeprazole.Rat.in_vivo.Liver.Single.zip ftp://ftp.biosciencedbc.jp/arch...ive/open-tggates/LATEST/Rat/in_vivo/Liver/Repeat/omeprazole.Rat.in_vivo.Liver.Repeat.zip ftp://ftp.bioscienc
Compound list: triamterene [Open TG-GATEs

Lifescience Database Archive (English)

Full Text Available triamterene TRI 00101 ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Rat/in..._vitro/triamterene.Rat.in_vitro.Liver.zip ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Rat/in_vivo.../Liver/Single/triamterene.Rat.in_vivo.Liver.Single.zip ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATES...T/Rat/in_vivo/Liver/Repeat/triamterene.Rat.in_vivo.Liver.Repeat.zip ftp://ftp.bio...sciencedbc.jp/archive/open-tggates/LATEST/Rat/in_vivo/Kidney/Single/triamterene.Rat.in_vivo.Kidney.Single.zip ftp:
Compound list: nitrofurantoin [Open TG-GATEs

Lifescience Database Archive (English)

Full Text Available nitrofurantoin NFT 00020 ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Hum...an/in_vitro/nitrofurantoin.Human.in_vitro.Liver.zip ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/R...at/in_vitro/nitrofurantoin.Rat.in_vitro.Liver.zip ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Rat.../in_vivo/Liver/Single/nitrofurantoin.Rat.in_vivo.Liver.Single.zip ftp://ftp.biosc...iencedbc.jp/archive/open-tggates/LATEST/Rat/in_vivo/Liver/Repeat/nitrofurantoin.Rat.in_vivo.Liver.Repeat.zip ftp:
Compound list: acetazolamide [Open TG-GATEs

Lifescience Database Archive (English)

Full Text Available acetazolamide ACZ 00108 ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Human/in_vitro/acetazolam...ide.Human.in_vitro.Liver.zip ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Rat/in_vitro/acetazolam..._vivo/Liver/Single/acetazolamide.Rat.in_vivo.Liver.Single.zip ftp://ftp.bioscienc...edbc.jp/archive/open-tggates/LATEST/Rat/in_vivo/Liver/Repeat/acetazolamide.Rat.in_vivo.Liver.Repeat.zip ftp:...//ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Rat/in_vivo/Kidney/Single/acetazolamide.Rat.in_vivo.Kidne
Effect of repeated applications of pesticides used on cotton on soil properties

International Nuclear Information System (INIS)

Zayed, S.M.A.D.; Farghaly, M.; Soliman, S.M.; Taha, H.

2001-01-01

Repeated application of monocrotophos, methomyl and carbaryl for four years considerably reduced microbial counts, iron reduction, nitrification and arginine deaminase activity in soil. The microbial activities seemed to recover several weeks following pesticide application. The inhibition of enzyme activities was in general more obvious during the second to the fourth years. The maximum inhibition of iron reduction capacity and arginine deaminase activity was observed by the end of the fourth year and amounted to about 90% of control values. No pronounced effect of the used insecticides on respiration and dehydrogenase activity could be detected over the experimental period. (author)
Compound list: caffeine [Open TG-GATEs

Lifescience Database Archive (English)

Full Text Available caffeine CAF 00097 ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Human/in_vitro/caffeine....Human.in_vitro.Liver.zip ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Rat/in_vitro/caffeine....Rat.in_vitro.Liver.zip ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Rat/in_vivo/Liver/Single/caffeine...-tggates/LATEST/Rat/in_vivo/Liver/Repeat/caffeine.Rat.in_vivo.Liver.Repeat.zip ftp://ftp.biosciencedbc.jp/ar...chive/open-tggates/LATEST/Rat/in_vivo/Kidney/Single/caffeine.Rat.in_vivo.Kidney.Single.zip ftp://ftp.bioscie

Compound list: bucetin [Open TG-GATEs

Lifescience Database Archive (English)

Full Text Available bucetin BCT 00139 ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Human/in_v...itro/bucetin.Human.in_vitro.Liver.zip ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Rat/in_vitro/bu...cetin.Rat.in_vitro.Liver.zip ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Rat/in_vivo/Liver/Single.../bucetin.Rat.in_vivo.Liver.Single.zip ftp://ftp.biosciencedbc.jp/archive/open-tgg...ates/LATEST/Rat/in_vivo/Liver/Repeat/bucetin.Rat.in_vivo.Liver.Repeat.zip ftp://ftp.biosciencedbc.jp/archive
Compound list: cisplatin [Open TG-GATEs

Lifescience Database Archive (English)

Full Text Available cisplatin CSP 00132 ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Rat/in_v...itro/cisplatin.Rat.in_vitro.Liver.zip ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Rat/in_vivo/Liv...er/Single/cisplatin.Rat.in_vivo.Liver.Single.zip ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Rat/...in_vivo/Liver/Repeat/cisplatin.Rat.in_vivo.Liver.Repeat.zip ftp://ftp.bioscienced...bc.jp/archive/open-tggates/LATEST/Rat/in_vivo/Kidney/Single/cisplatin.Rat.in_vivo.Kidney.Single.zip ftp://ft
Compound list: lomustine [Open TG-GATEs

Lifescience Database Archive (English)

Full Text Available lomustine LS 00049 ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Human/in_vitro/lomustine....Human.in_vitro.Liver.zip ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Rat/in_vitro/lomustine....Rat.in_vitro.Liver.zip ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Rat/in_vivo/Liver/Single/lomustine...pen-tggates/LATEST/Rat/in_vivo/Liver/Repeat/lomustine.Rat.in_vivo.Liver.Repeat.zip ftp://ftp.biosciencedbc.j...p/archive/open-tggates/LATEST/Rat/in_vivo/Kidney/Single/lomustine.Rat.in_vivo.Kidney.Single.zip ftp://ftp.bi
Compound list: ethionine [Open TG-GATEs

Lifescience Database Archive (English)

Full Text Available ethionine ET 00013 ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Human/in_vitro/ethionine....Human.in_vitro.Liver.zip ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Rat/in_vitro/ethionine....Rat.in_vitro.Liver.zip ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Rat/in_vivo/Liver/Single/ethionine...pen-tggates/LATEST/Rat/in_vivo/Liver/Repeat/ethionine.Rat.in_vivo.Liver.Repeat.zip ftp://ftp.biosciencedbc.j...p/archive/open-tggates/LATEST/Rat/in_vivo/Kidney/Single/ethionine.Rat.in_vivo.Kidney.Single.zip ftp://ftp.bi
Effects of long-term repeated topical fluoride applications and adhesion promoter on shear bond strengths of orthodontic brackets

Science.gov (United States)

Endo, Toshiya; Ishida, Rieko; Komatsuzaki, Akira; Sanpei, Shinya; Tanaka, Satoshi; Sekimoto, Tsuneo

2014-01-01

Objective: The purpose of this study was to assess the effects of long-term repeated topical application of fluoride before bonding and an adhesion promoter on the bond strength of orthodontic brackets. Materials and Methods: A total of 76 bovine incisors were collected and divided equally into four groups. In group 1, the brackets were bonded without topical fluoride application or adhesion promoter. In group 2, before bonding, the adhesion promoter was applied to nonfluoridated enamel. In group 3, the brackets were bonded without the application of the adhesion promoter to enamel, which had undergone long-term repeated topical fluoride treatments. Teeth in group 4 received the long-term repeated topical applications of fluoride, and the brackets were bonded using the adhesion promoter. All the brackets were bonded using BeautyOrtho Bond self-etching adhesive. The shear bond strength was measured and the bond failure modes were evaluated with the use of the adhesive remnant index (ARI) after debonding. Results: The mean shear bond strength was significantly lower in group 3 than in groups 1, 2, and 4, and there were no significant differences between the groups except for group 3. There were significant differences in the distribution of ARI scores between groups 2 and 3, and between groups 3 and 4. Conclusions: The adhesion promoter can recover the bond strength reduced by the long-term repeated topical applications of fluoride to the prefluoridation level and had a significantly great amount of adhesives left on either fluoridated or nonfluoridated enamel. PMID:25512720
Welfare Risks of Repeated Application of On-Farm Killing Methods for Poultry

Directory of Open Access Journals (Sweden)

Jessica E. Martin

2018-03-01

Full Text Available Council Regulation (EC no. 1099/2009 on the protection of animals at the time of killing restricts the use of manual cervical dislocation in poultry on farms in the European Union (EU to birds weighing up to 3 kg and 70 birds per person per day. However, few studies have examined whether repeated application of manual cervical dislocation has welfare implications and whether these are dependent on individual operator skill or susceptibility to fatigue. We investigated the effects of repeated application (100 birds at a fixed killing rate of 1 bird per 2 min and multiple operators on two methods of killing of broilers, laying hens, and turkeys in commercial settings. We compared the efficacy and welfare impact of repeated application of cervical dislocation and a percussive killer (Cash Poultry Killer, CPK, using 12 male stockworkers on three farms (one farm per bird type. Both methods achieved over 96% kill success at the first attempt. The killing methods were equally effective for each bird type and there was no evidence of reduced performance with time and/or bird number. Both methods of killing caused a rapid loss of reflexes, indicating loss of brain function. There was more variation in reflex durations and post-mortem damage in birds killed by cervical dislocation than that found using CPK. High neck dislocation was associated with improved kill success and more rapid loss of reflexes. The CPK caused damage to multiple brain areas with little variation. Overall, the CPK was associated with faster abolition of reflexes, with fewer birds exhibiting them at all, suggestive of better welfare outcomes. However, technical difficulties with the CPK highlighted the advantages of cervical dislocation, which can be performed immediately with no equipment. At the killing rates tested, we did not find evidence to justify the current EU limit on the number of birds that one operator can kill on–farm by manual cervical dislocation.
ICT Application and Utilization for Distance and Open Learning ...

African Journals Online (AJOL)

This study examined the extent of ICT application and utilization for distance and open learning education at the National Open University of Nigeria (NOUN). The descriptive survey research method was adopted for the study while questionnaire was adopted as major instrument of data collection. A total of 113 copie/s of ...
Impact of repeated insecticide application on soil microbial activity

International Nuclear Information System (INIS)

Xu Bujin; Zhang Yongxi; Chen Meici; Zhu Nanwen; Ming Hong

2001-01-01

The effects of repeated insecticide application on soil microbial activity were studied both in a cotton field and in the laboratory. The results of experiment show that there are some effects on soil microbial activities, such as the population of soil microorganisms, soil respiration, dehydrogenase activity and nitrogen fixation. The degree of effects depends on the chemical dosage. Within the range of 0.5-10.0 μg/g air-dry-soil, the higher the concentration, the stronger effect. In this experiment, the effect disappeared within 4, 8 or 16 days after treatment, depending on the dose applied. In field conditions, the situation is more complex and the data of field experiment show greater fluctuation. (author)
Compound list: ajmaline [Open TG-GATEs

Lifescience Database Archive (English)

Full Text Available ajmaline AJM 00118 ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Human/in_vitro/ajmaline....Human.in_vitro.Liver.zip ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Rat/in_vitro/ajmaline....Rat.in_vitro.Liver.zip ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Rat/in_vivo/Liver/Single/ajmaline.Rat.in_vivo.Liver.Single.zip ftp://ftp.bi...-tggates/LATEST/Rat/in_vivo/Liver/Repeat/ajmaline.Rat.in_vivo.Liver.Repeat.zip ...
46 CFR 308.524 - Application for cancellation of Open Cargo Policy, Form MA-304.

Science.gov (United States)

2010-10-01

... 46 Shipping 8 2010-10-01 2010-10-01 false Application for cancellation of Open Cargo Policy, Form... § 308.524 Application for cancellation of Open Cargo Policy, Form MA-304. The standard form of application for cancellation of an Open Cargo Policy Form MA-304 may be obtained from the American War Risk...
Integrating open-source software applications to build molecular dynamics systems.

Science.gov (United States)

Allen, Bruce M; Predecki, Paul K; Kumosa, Maciej

2014-04-05

Three open-source applications, NanoEngineer-1, packmol, and mis2lmp are integrated using an open-source file format to quickly create molecular dynamics (MD) cells for simulation. The three software applications collectively make up the open-source software (OSS) suite known as MD Studio (MDS). The software is validated through software engineering practices and is verified through simulation of the diglycidyl ether of bisphenol-a and isophorone diamine (DGEBA/IPD) system. Multiple simulations are run using the MDS software to create MD cells, and the data generated are used to calculate density, bulk modulus, and glass transition temperature of the DGEBA/IPD system. Simulation results compare well with published experimental and numerical results. The MDS software prototype confirms that OSS applications can be analyzed against real-world research requirements and integrated to create a new capability. Copyright © 2014 Wiley Periodicals, Inc.
46 CFR 308.523 - Application for revision of Open Cargo Policy, Form MA-303.

Science.gov (United States)

2010-10-01

... 46 Shipping 8 2010-10-01 2010-10-01 false Application for revision of Open Cargo Policy, Form MA... Application for revision of Open Cargo Policy, Form MA-303. An application for the revision of an Open Cargo Policy shall be filed in duplicate with the Underwriting Agent on a form which may be obtained from the...
Compound list: methylene dianiline [Open TG-GATEs

Lifescience Database Archive (English)

Full Text Available methylene dianiline DAPM 00155 ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Human/in_vitro/methyle...es/LATEST/Rat/in_vivo/Liver/Single/methylene_dianiline.Rat.in_vivo.Liver.Single.zip ftp://ftp.biosciencedbc....jp/archive/open-tggates/LATEST/Rat/in_vivo/Liver/Repeat/methylene_dianiline.Rat.in_vivo.Liver.Repeat.zip ... ...ne_dianiline.Human.in_vitro.Liver.zip ftp://ftp.biosciencedbc.jp/archive/open-tggat
Open Data in Mobile Applications, New Models for Service Information

Directory of Open Access Journals (Sweden)

Manuel GÉRTRUDIX BARRIO

2016-06-01

Full Text Available The combination of open data generated by government and the proliferation of mobile devices enables the creation of new information services and improved delivery of existing ones. Significantly, it allows citizens access to simple,quick and effective way to information. Free applications that use open data provide useful information in real time, tailored to the user experience and / or geographic location. This changes the concept of “service information”. Both the infomediary sector and citizens now have new models of production and dissemination of this type of information. From the theoretical contextualization of aspects such as processes datification of reality, mobile registration of everyday experience, or reinterpretation of the service information, we analyze the role of open data in the public sector in Spain and its application concrete in building apps based on this data sets. The findings indicate that this is a phenomenon that will continue to grow because these applications provide useful and efficient information to decision-making in everyday life.
Compound list: valproic acid [Open TG-GATEs

Lifescience Database Archive (English)

Full Text Available valproic acid VPA 00005 ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Human/in_vitro/valpr...oic_acid.Human.in_vitro.Liver.zip ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Rat/in_vitro/valpr...oic_acid.Rat.in_vitro.Liver.zip ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Rat/in_vivo/Liver/Single/valpr...edbc.jp/archive/open-tggates/LATEST/Rat/in_vivo/Liver/Repeat/valproic_acid.Rat.in_vivo.Liver.Repeat.zip ftp:...//ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Rat/in_vivo/Kidney/Single/valproic_acid.Rat.in_vivo.Kidne
Use of graphite layer open tubular (GLOT) in environmental analysis; Impiego di colonne GLOT (Graphite Layer Open Tubular) nell`analisi ambientale

Energy Technology Data Exchange (ETDEWEB)

Bruner, F.; Lattanzi, L. [Urbino Univ. (Italy). Istituto di Scienze Chimiche, Centro di Studio per la Chimica e le Tecnologie Strumentali Avanzate; Borghesi, P. [Centro Ricerca e Sviluppo, Enichem Elastomeri, Ravenna (Italy)

1996-06-01

Recently it has been developed a series of new capillary columns characterised by the use of graphitized carbon black modified from different amount of liquid phase. The characteristics of these columns, called graphite layer open tubular (GLOT), are described together with their application to the environmental analysis. A specific application of GLOT columns is for the direct analysis of aqueous solutions avoiding solvent extraction procedure. A comparison between a GLOT column and a traditional capillary column, estimating their behaviour after repeated direct injections of aqueous solution sample is written. Some applications regarding the analysis of the atmosphere pollutants, as aliphatic and aromatic hydrocarbons, and their compounds are written too.
Compound list: vitamin A [Open TG-GATEs

Lifescience Database Archive (English)

Full Text Available vitamin A VA 00059 ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Human/in_vitro/vitam...in_A.Human.in_vitro.Liver.zip ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Rat/in_vitro/vitam...in_A.Rat.in_vitro.Liver.zip ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Rat/in_vivo/Liver/Single/vitam...pen-tggates/LATEST/Rat/in_vivo/Liver/Repeat/vitamin_A.Rat.in_vivo.Liver.Repeat.zip ...
Quantum repeated games revisited

International Nuclear Information System (INIS)

Frąckiewicz, Piotr

2012-01-01

We present a scheme for playing quantum repeated 2 × 2 games based on Marinatto and Weber’s approach to quantum games. As a potential application, we study the twice repeated Prisoner’s Dilemma game. We show that results not available in the classical game can be obtained when the game is played in the quantum way. Before we present our idea, we comment on the previous scheme of playing quantum repeated games proposed by Iqbal and Toor. We point out the drawbacks that make their results unacceptable. (paper)
Compound list: carbon tetrachloride [Open TG-GATEs

Lifescience Database Archive (English)

Full Text Available carbon tetrachloride CCL4 00003 ftp://ftp.biosciencedbc.jp/archive/open-tggates/LAT...EST/Human/in_vitro/carbon_tetrachloride.Human.in_vitro.Liver.zip ftp://ftp.biosciencedbc.jp/archive/open-tgg...ates/LATEST/Rat/in_vitro/carbon_tetrachloride.Rat.in_vitro.Liver.zip ftp://ftp.biosciencedbc.jp/archive/open...-tggates/LATEST/Rat/in_vivo/Liver/Single/carbon_tetrachloride.Rat.in_vivo.Liver.S...ingle.zip ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Rat/in_vivo/Liver/Repeat/carbon_tetrachloride.Rat.in_vivo.Liver.Repeat.zip ...
Compound list: amphotericin B [Open TG-GATEs

Lifescience Database Archive (English)

Full Text Available amphotericin B AMB 00157 ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Hum...an/in_vitro/amphotericin_B.Human.in_vitro.Liver.zip ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/R...at/in_vivo/Liver/Single/amphotericin_B.Rat.in_vivo.Liver.Single.zip ftp://ftp.biosciencedbc.jp/archive/open-...tggates/LATEST/Rat/in_vivo/Liver/Repeat/amphotericin_B.Rat.in_vivo.Liver.Repeat.zip ftp:...//ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Rat/in_vivo/Kidney/Single/amphotericin_B.Rat.in_vivo.Kidney.Single.zip ftp:

Compound list: cyclosporine A [Open TG-GATEs

Lifescience Database Archive (English)

Full Text Available cyclosporine A CSA 00142 ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Human/in_vitro/cyclosporine..._A.Human.in_vitro.Liver.zip ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Rat/in_vitro/cyclosporine.../in_vivo/Liver/Single/cyclosporine_A.Rat.in_vivo.Liver.Single.zip ftp://ftp.biosc...iencedbc.jp/archive/open-tggates/LATEST/Rat/in_vivo/Liver/Repeat/cyclosporine_A.Rat.in_vivo.Liver.Repeat.zip... ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Rat/in_vivo/Kidney/Single/cyclosporine_A.Rat.in_vivo
77 FR 8801 - Request for Applications: The Community Forest and Open Space Conservation Program

Science.gov (United States)

2012-02-15

... DEPARTMENT OF AGRICULTURE Forest Service Request for Applications: The Community Forest and Open Space Conservation Program AGENCY: Forest Service, USDA. ACTION: Request for applications. SUMMARY: The..., requests applications for the Community Forest and Open Space Conservation Program (Community Forest...
Application of Surpac and Whittle Software in Open Pit Optimisation ...

African Journals Online (AJOL)

Application of Surpac and Whittle Software in Open Pit Optimisation and Design. ... This paper studies the Surpac and Whittle software and their application in designing an optimised pit. ... EMAIL FREE FULL TEXT EMAIL FREE FULL TEXT
[Clustered regularly interspaced short palindromic repeats: structure, function and application--a review].

Science.gov (United States)

Cui, Yujun; Li, Yanjun; Yan, Yanfeng; Yang, Ruifu

2008-11-01

CRISPRs (Clustered Regularly Interspaced Short Palindromic Repeats), the basis of spoligotyping technology, can provide prokaryotes with heritable adaptive immunity against phages' invasion. Studies on CRISPR loci and their associated elements, including various CAS (CRISPR-associated) proteins and leader sequences, are still in its infant period. We introduce the brief history', structure, function, bioinformatics research and application of this amazing immunity system in prokaryotic organism for inspiring more scientists to find their interest in this developing topic.
Opening Doors to Recovery: Recidivism and Recovery Among Persons With Serious Mental Illnesses and Repeated Hospitalizations.

Science.gov (United States)

Compton, Michael T; Kelley, Mary E; Pope, Alicia; Smith, Kelly; Broussard, Beth; Reed, Thomas A; DiPolito, June A; Druss, Benjamin G; Li, Charles; Lott Haynes, Nora

2016-02-01

Repeated hospitalizations and arrests or incarcerations diminish the ability of individuals with serious mental illnesses to pursue recovery. Community mental health systems need new models to address recidivism as well as service fragmentation, lack of engagement by local stakeholders, and poor communication between mental health providers and the police. This study examined the initial effects on institutional recidivism and measures of recovery among persons enrolled in Opening Doors to Recovery, an intensive, team-based community support program for persons with mental illness and a history of inpatient psychiatric recidivism. A randomized controlled trial of the model is underway. The number of hospitalizations, days hospitalized, and arrests (all from state administrative sources) in the year before enrollment and during the first 12 months of enrollment in the program were compared. Longitudinal trajectories of recovery-using three self-report and five clinician-rated measures-were examined. Analyses accounted for baseline symptom severity and intensity of involvement in the program. One hundred participants were enrolled, and 72 were included in the analyses. Hospitalizations decreased, from 1.9±1.6 to .6±.9 (precovery measures, and trajectories of improvement were apparent across the entire follow-up period. Opening Doors to Recovery holds promise as a new service approach for reducing hospital recidivism and promoting recovery in community mental health systems and is deserving of further controlled testing.
Accumulation of sulfonamide resistance genes in arable soils due to repeated application of manure containing sulfadiazine.

Science.gov (United States)

Heuer, Holger; Solehati, Qodiah; Zimmerling, Ute; Kleineidam, Kristina; Schloter, Michael; Müller, Tanja; Focks, Andreas; Thiele-Bruhn, Sören; Smalla, Kornelia

2011-04-01

Two soils were amended three times with pig manure. The abundance of sulfonamide resistance genes was determined by quantitative PCR 2 months after each application. In both soils treated with sulfadiazine-containing manure, the numbers of copies of sul1 and sul2 significantly increased compared to numbers after treatments with antibiotic-free manure or a control and accumulated with repeated applications.
DNA dynamics is likely to be a factor in the genomic nucleotide repeats expansions related to diseases.

Directory of Open Access Journals (Sweden)

Boian S Alexandrov

Full Text Available Trinucleotide repeats sequences (TRS represent a common type of genomic DNA motif whose expansion is associated with a large number of human diseases. The driving molecular mechanisms of the TRS ongoing dynamic expansion across generations and within tissues and its influence on genomic DNA functions are not well understood. Here we report results for a novel and notable collective breathing behavior of genomic DNA of tandem TRS, leading to propensity for large local DNA transient openings at physiological temperature. Our Langevin molecular dynamics (LMD and Markov Chain Monte Carlo (MCMC simulations demonstrate that the patterns of openings of various TRSs depend specifically on their length. The collective propensity for DNA strand separation of repeated sequences serves as a precursor for outsized intermediate bubble states independently of the G/C-content. We report that repeats have the potential to interfere with the binding of transcription factors to their consensus sequence by altered DNA breathing dynamics in proximity of the binding sites. These observations might influence ongoing attempts to use LMD and MCMC simulations for TRS-related modeling of genomic DNA functionality in elucidating the common denominators of the dynamic TRS expansion mutation with potential therapeutic applications.
Performance modeling of hybrid MPI/OpenMP scientific applications on large-scale multicore supercomputers

KAUST Repository

Wu, Xingfu; Taylor, Valerie

2013-01-01

In this paper, we present a performance modeling framework based on memory bandwidth contention time and a parameterized communication model to predict the performance of OpenMP, MPI and hybrid applications with weak scaling on three large-scale multicore supercomputers: IBM POWER4, POWER5+ and BlueGene/P, and analyze the performance of these MPI, OpenMP and hybrid applications. We use STREAM memory benchmarks and Intel's MPI benchmarks to provide initial performance analysis and model validation of MPI and OpenMP applications on these multicore supercomputers because the measured sustained memory bandwidth can provide insight into the memory bandwidth that a system should sustain on scientific applications with the same amount of workload per core. In addition to using these benchmarks, we also use a weak-scaling hybrid MPI/OpenMP large-scale scientific application: Gyrokinetic Toroidal Code (GTC) in magnetic fusion to validate our performance model of the hybrid application on these multicore supercomputers. The validation results for our performance modeling method show less than 7.77% error rate in predicting the performance of hybrid MPI/OpenMP GTC on up to 512 cores on these multicore supercomputers. © 2013 Elsevier Inc.
Performance modeling of hybrid MPI/OpenMP scientific applications on large-scale multicore supercomputers

KAUST Repository

Wu, Xingfu

2013-12-01

In this paper, we present a performance modeling framework based on memory bandwidth contention time and a parameterized communication model to predict the performance of OpenMP, MPI and hybrid applications with weak scaling on three large-scale multicore supercomputers: IBM POWER4, POWER5+ and BlueGene/P, and analyze the performance of these MPI, OpenMP and hybrid applications. We use STREAM memory benchmarks and Intel\\'s MPI benchmarks to provide initial performance analysis and model validation of MPI and OpenMP applications on these multicore supercomputers because the measured sustained memory bandwidth can provide insight into the memory bandwidth that a system should sustain on scientific applications with the same amount of workload per core. In addition to using these benchmarks, we also use a weak-scaling hybrid MPI/OpenMP large-scale scientific application: Gyrokinetic Toroidal Code (GTC) in magnetic fusion to validate our performance model of the hybrid application on these multicore supercomputers. The validation results for our performance modeling method show less than 7.77% error rate in predicting the performance of hybrid MPI/OpenMP GTC on up to 512 cores on these multicore supercomputers. © 2013 Elsevier Inc.
Impact of single and repeated applications of the insecticide chlorpyrifos on tropical freshwater plankton communities

NARCIS (Netherlands)

Daam, M.A.; Brink, van den P.J.; Nogueira, A.J.A.

2008-01-01

This paper describes the effects of a single and a repeated application of the organophosphorus insecticide chlorpyrifos on zooplankton and phytoplankton communities in outdoor microcosms in Thailand. Treatment levels of 1 mu g L-1 were applied once or twice with a 2-week interval. Both treatments
Preparation of open tubular capillary columns by in situ ring-opening polymerization and their applications in cLC-MS/MS analysis of tryptic digest.

Science.gov (United States)

Wang, Hongwei; Yao, Yating; Li, Ya; Ma, Shujuan; Peng, Xiaojun; Ou, Junjie; Ye, Mingliang

2017-08-01

An open tubular (OT) column (25 μm i.d.) was prepared by in situ ring-opening polymerization of octaglycidyldimethylsilyl polyhedral oligomeric silsesquioxanes (POSS-epoxy) with 4-aminophenyl disulfide (APDS) in a binary porogenic system of ethanol/H 2 O. It was found that porogenic composition played an important role in the formation of OT stationary phases. The ratio of ethanol/H 2 O at 6/1 (v/v) would lead to the fabrication of hybrid monoliths, while the ratio of ethanol/H 2 O at 13/1 (v/v) would result in the synthesis of OT phases. In addition, the effects of precursor content and reaction duration on the thickness of OT stationary phases were investigated. Either lower precursor content or shorter reaction duration would produce thinner layer of OT column. The repeatability of OT columns was evaluated through relative standard deviation (RSD%) with benzene as the analyte. The run-to-run, column-to-column and batch-to-batch repeatabilities were 1.7%, 4.8% and 5.6%, respectively, exhibiting satisfactory repeatability of the OT column. Then tryptic digest of mouse liver proteins was used to evaluate the performance of the resulting OT columns (25 μm i.d. × 2.5 m in length) by cLC-MS/MS analysis, demonstrating their potential in proteome analysis. Copyright © 2017 Elsevier B.V. All rights reserved.
Cloud computing geospatial application for water resources based on free and open source software and open standards - a prototype

Science.gov (United States)

Delipetrev, Blagoj

2016-04-01

Presently, most of the existing software is desktop-based, designed to work on a single computer, which represents a major limitation in many ways, starting from limited computer processing, storage power, accessibility, availability, etc. The only feasible solution lies in the web and cloud. This abstract presents research and development of a cloud computing geospatial application for water resources based on free and open source software and open standards using hybrid deployment model of public - private cloud, running on two separate virtual machines (VMs). The first one (VM1) is running on Amazon web services (AWS) and the second one (VM2) is running on a Xen cloud platform. The presented cloud application is developed using free and open source software, open standards and prototype code. The cloud application presents a framework how to develop specialized cloud geospatial application that needs only a web browser to be used. This cloud application is the ultimate collaboration geospatial platform because multiple users across the globe with internet connection and browser can jointly model geospatial objects, enter attribute data and information, execute algorithms, and visualize results. The presented cloud application is: available all the time, accessible from everywhere, it is scalable, works in a distributed computer environment, it creates a real-time multiuser collaboration platform, the programing languages code and components are interoperable, and it is flexible in including additional components. The cloud geospatial application is implemented as a specialized water resources application with three web services for 1) data infrastructure (DI), 2) support for water resources modelling (WRM), 3) user management. The web services are running on two VMs that are communicating over the internet providing services to users. The application was tested on the Zletovica river basin case study with concurrent multiple users. The application is a state
Compound list: naphthyl isothiocyanate [Open TG-GATEs

Lifescience Database Archive (English)

Full Text Available naphthyl isothiocyanate ANIT 00009 ftp://ftp.biosciencedbc.jp/archive/open-tggates/...LATEST/Human/in_vitro/naphthyl_isothiocyanate.Human.in_vitro.Liver.zip ftp://ftp.biosciencedbc.jp/archive/op...en-tggates/LATEST/Rat/in_vitro/naphthyl_isothiocyanate.Rat.in_vitro.Liver.zip ftp://ftp.biosciencedbc.jp/arc...hive/open-tggates/LATEST/Rat/in_vivo/Liver/Single/naphthyl_isothiocyanate.Rat.in_...vivo.Liver.Single.zip ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Rat/in_vivo/Liver/Repeat/naphthyl_isothiocyanate.Rat.in_vivo.Liver.Repeat.zip ...
Application of innovative policies for controlling radionuclide releases: The open-quotes open-market trading ruleclose quotes

International Nuclear Information System (INIS)

Moeller, D.W.

1997-01-01

In the past, most efforts for reducing airborne radio nuclide releases and controlling radioactive wastes have been directed to the development of new and improved technologies. Little attention has been paid to the possible application to these problems of new, innovative policies. Yet, experience in other fields shows that such applications could be beneficial. A prime example is the open-quotes open-market trading rule,close quotes now being widely used in the U.S. for the control of a range of environmental problems. Through this rule, nuclear facility operators would be permitted to control airborne emissions in a more cost-effective manner, and those responsible for decommissioning and decontaminating nuclear facilities no longer in operation could do so at far lower costs while generating significantly smaller volumes of radioactive wastes. Application of such a policy would also significantly reduce the demands on existing, and the need for research to develop new, improved, control technologies. 16 refs
Effect of fatigue on force production and force application technique during repeated sprints.

Science.gov (United States)

Morin, Jean-Benoit; Samozino, Pierre; Edouard, Pascal; Tomazin, Katja

2011-10-13

We investigated the changes in the technical ability of force application/orientation against the ground vs. the physical capability of total force production after a multiple-set repeated sprints series. Twelve male physical education students familiar with sprint running performed four sets of five 6-s sprints (24s of passive rest between sprints, 3min between sets). Sprints were performed from a standing start on an instrumented treadmill, allowing the computation of vertical (F(V)), net horizontal (F(H)) and total (F(Tot)) ground reaction forces for each step. Furthermore, the ratio of forces was calculated as RF=F(H)F(Tot)(-1), and the index of force application technique (D(RF)) representing the decrement in RF with increase in speed was computed as the slope of the linear RF-speed relationship. Changes between pre- (first two sprints) and post-fatigue (last two sprints) were tested using paired t-tests. Performance decreased significantly (e.g. top speed decreased by 15.7±5.4%; Pmultiple-set repeated sprint series, both the total force production capability and the technical ability to apply force effectively against the ground are altered, the latter to a larger extent than the former. Copyright © 2011 Elsevier Ltd. All rights reserved.
Deformation analysis of the repeated positional surveys in the undermined localities using web applications and WMS map services

Directory of Open Access Journals (Sweden)

Milan Talich

2007-06-01

Full Text Available The XML web application for on-line calculations of deformation analysis from the repeated positional surveys using Internet service and data is described. Parameters of deformation field (strain tensors, total dilatations are determined in a grid network covering the zone of interest. Displacement vectors from repeated measurements at given points of a geodetic network represent the imput data of calculation. The calculation is based on application of the theory of continuum mechanics and its fundamental prerequisite is homogeneity of the researched territory.The application currently utilizes the Web Map Services - WMS for the graphic presentation of calculated results as GIS. This service for example enables on-line thematic map composition as defined by the user in the window of Internet explorer based on data given by servers of WMS service. Thus the user does not need to own any geographic data to create his/her GIS.Furthermore there are also given application examples of the repeated geodetic surveys used in the field at localities in the forefront of ČSA giant quarry at Komořany and in the undermined territory in Ostrava region. The examples show the independence of calculated values of tensors from rotation and translation of the coordinate systems in practise. This fact gives the evidence that the deformation analysis is more objective dynamic indicator in the researched area and not only the calculus and representation of point displacement vectors. After registration this application is at all interested persons disposal to on-line calculations via the Internet.
ARLearn - Open source mobile application platform for learning

NARCIS (Netherlands)

Börner, Dirk; Ternier, Stefaan; Klemke, Roland; Schmitz, Birgit; Kalz, Marco; Tabuenca, Bernardo; Specht, Marcus

2013-01-01

Börner, D., Ternier, S., Klemke, R., Schmitz, B., Kalz, M., Tabuenca, B., & Specht, M. (2013). ARLearn - Open source mobile application platform for learning. In D. Hernández-Leo et al. (Eds.), Scaling up Learning for Sustained Impact. Proceedings of the 8th European Conference on Technology
Accumulation of Sulfonamide Resistance Genes in Arable Soils Due to Repeated Application of Manure Containing Sulfadiazine ▿

OpenAIRE

Heuer, Holger; Solehati, Qodiah; Zimmerling, Ute; Kleineidam, Kristina; Schloter, Michael; Müller, Tanja; Focks, Andreas; Thiele-Bruhn, Sören; Smalla, Kornelia

2011-01-01

Two soils were amended three times with pig manure. The abundance of sulfonamide resistance genes was determined by quantitative PCR 2 months after each application. In both soils treated with sulfadiazine-containing manure, the numbers of copies of sul1 and sul2 significantly increased compared to numbers after treatments with antibiotic-free manure or a control and accumulated with repeated applications.
Repeatability of Cryogenic Multilayer Insulation

Science.gov (United States)

Johnson, W. L.; Vanderlaan, M.; Wood, J. J.; Rhys, N. O.; Guo, W.; Van Sciver, S.; Chato, D. J.

2017-12-01

Due to the variety of requirements across aerospace platforms, and one off projects, the repeatability of cryogenic multilayer insulation (MLI) has never been fully established. The objective of this test program is to provide a more basic understanding of the thermal performance repeatability of MLI systems that are applicable to large scale tanks. There are several different types of repeatability that can be accounted for: these include repeatability between identical blankets, repeatability of installation of the same blanket, and repeatability of a test apparatus. The focus of the work in this report is on the first two types of repeatability. Statistically, repeatability can mean many different things. In simplest form, it refers to the range of performance that a population exhibits and the average of the population. However, as more and more identical components are made (i.e. the population of concern grows), the simple range morphs into a standard deviation from an average performance. Initial repeatability testing on MLI blankets has been completed at Florida State University. Repeatability of five Glenn Research Center (GRC) provided coupons with 25 layers was shown to be +/- 8.4% whereas repeatability of repeatedly installing a single coupon was shown to be +/- 8.0%. A second group of 10 coupons has been fabricated by Yetispace and tested by Florida State University, the repeatability between coupons has been shown to be +/- 15-25%. Based on detailed statistical analysis, the data has been shown to be statistically significant.
Use of graphite layer open tubular (GLOT) in environmental analysis

International Nuclear Information System (INIS)

Bruner, F.; Lattanzi, L.; Borghesi, P.

1996-01-01

Recently it has been developed a series of new capillary columns characterised by the use of graphitized carbon black modified from different amount of liquid phase. The characteristics of these columns, called graphite layer open tubular (GLOT), are described together with their application to the environmental analysis. A specific application of GLOT columns is for the direct analysis of aqueous solutions avoiding solvent extraction procedure. A comparison between a GLOT column and a traditional capillary column, estimating their behaviour after repeated direct injections of aqueous solution sample is written. Some applications regarding the analysis of the atmosphere pollutants, as aliphatic and aromatic hydrocarbons, and their compounds are written too

Compound list: butylated hydroxyanisole [Open TG-GATEs

Lifescience Database Archive (English)

Full Text Available butylated hydroxyanisole BHA 00156 ftp://ftp.biosciencedbc.jp/archive/open-tggates/...LATEST/Human/in_vitro/butylated_hydroxyanisole.Human.in_vitro.Liver.zip ftp://ftp.biosciencedbc.jp/archive/o...pen-tggates/LATEST/Rat/in_vivo/Liver/Single/butylated_hydroxyanisole.Rat.in_vivo.Liver.Single.zip ftp://ftp....biosciencedbc.jp/archive/open-tggates/LATEST/Rat/in_vivo/Liver/Repeat/butylated_hydroxyanisole.Rat.in_vivo.Liver.Repeat.zip ...
Compound list: fluoxetine hydrochloride [Open TG-GATEs

Lifescience Database Archive (English)

Full Text Available fluoxetine hydrochloride FLX 00158 ftp://ftp.biosciencedbc.jp/archive/open-tggates/...LATEST/Human/in_vitro/fluoxetine_hydrochloride.Human.in_vitro.Liver.zip ftp://ftp.biosciencedbc.jp/archive/o...pen-tggates/LATEST/Rat/in_vivo/Liver/Single/fluoxetine_hydrochloride.Rat.in_vivo.Liver.Single.zip ftp://ftp....biosciencedbc.jp/archive/open-tggates/LATEST/Rat/in_vivo/Liver/Repeat/fluoxetine_hydrochloride.Rat.in_vivo.Liver.Repeat.zip ...
Development of a web application for water resources based on open source software

Science.gov (United States)

Delipetrev, Blagoj; Jonoski, Andreja; Solomatine, Dimitri P.

2014-01-01

This article presents research and development of a prototype web application for water resources using latest advancements in Information and Communication Technologies (ICT), open source software and web GIS. The web application has three web services for: (1) managing, presenting and storing of geospatial data, (2) support of water resources modeling and (3) water resources optimization. The web application is developed using several programming languages (PhP, Ajax, JavaScript, Java), libraries (OpenLayers, JQuery) and open source software components (GeoServer, PostgreSQL, PostGIS). The presented web application has several main advantages: it is available all the time, it is accessible from everywhere, it creates a real time multi-user collaboration platform, the programing languages code and components are interoperable and designed to work in a distributed computer environment, it is flexible for adding additional components and services and, it is scalable depending on the workload. The application was successfully tested on a case study with concurrent multi-users access.
Performance Modeling of Hybrid MPI/OpenMP Scientific Applications on Large-scale Multicore Cluster Systems

KAUST Repository

Wu, Xingfu; Taylor, Valerie

2011-01-01

In this paper, we present a performance modeling framework based on memory bandwidth contention time and a parameterized communication model to predict the performance of OpenMP, MPI and hybrid applications with weak scaling on three large-scale multicore clusters: IBM POWER4, POWER5+ and Blue Gene/P, and analyze the performance of these MPI, OpenMP and hybrid applications. We use STREAM memory benchmarks to provide initial performance analysis and model validation of MPI and OpenMP applications on these multicore clusters because the measured sustained memory bandwidth can provide insight into the memory bandwidth that a system should sustain on scientific applications with the same amount of workload per core. In addition to using these benchmarks, we also use a weak-scaling hybrid MPI/OpenMP large-scale scientific application: Gyro kinetic Toroidal Code in magnetic fusion to validate our performance model of the hybrid application on these multicore clusters. The validation results for our performance modeling method show less than 7.77% error rate in predicting the performance of hybrid MPI/OpenMP GTC on up to 512 cores on these multicore clusters. © 2011 IEEE.
Performance Modeling of Hybrid MPI/OpenMP Scientific Applications on Large-scale Multicore Cluster Systems

KAUST Repository

Wu, Xingfu

2011-08-01

In this paper, we present a performance modeling framework based on memory bandwidth contention time and a parameterized communication model to predict the performance of OpenMP, MPI and hybrid applications with weak scaling on three large-scale multicore clusters: IBM POWER4, POWER5+ and Blue Gene/P, and analyze the performance of these MPI, OpenMP and hybrid applications. We use STREAM memory benchmarks to provide initial performance analysis and model validation of MPI and OpenMP applications on these multicore clusters because the measured sustained memory bandwidth can provide insight into the memory bandwidth that a system should sustain on scientific applications with the same amount of workload per core. In addition to using these benchmarks, we also use a weak-scaling hybrid MPI/OpenMP large-scale scientific application: Gyro kinetic Toroidal Code in magnetic fusion to validate our performance model of the hybrid application on these multicore clusters. The validation results for our performance modeling method show less than 7.77% error rate in predicting the performance of hybrid MPI/OpenMP GTC on up to 512 cores on these multicore clusters. © 2011 IEEE.
Application of innovative policies for controlling radionuclide releases: The {open_quotes}open-market trading rule{close_quotes}

Energy Technology Data Exchange (ETDEWEB)

Moeller, D.W. [Dade Moeller & Associates, Inc., New Bern, NC (United States)

1997-08-01

In the past, most efforts for reducing airborne radio nuclide releases and controlling radioactive wastes have been directed to the development of new and improved technologies. Little attention has been paid to the possible application to these problems of new, innovative policies. Yet, experience in other fields shows that such applications could be beneficial. A prime example is the {open_quotes}open-market trading rule,{close_quotes} now being widely used in the U.S. for the control of a range of environmental problems. Through this rule, nuclear facility operators would be permitted to control airborne emissions in a more cost-effective manner, and those responsible for decommissioning and decontaminating nuclear facilities no longer in operation could do so at far lower costs while generating significantly smaller volumes of radioactive wastes. Application of such a policy would also significantly reduce the demands on existing, and the need for research to develop new, improved, control technologies. 16 refs.
Towards OpenVL: Improving Real-Time Performance of Computer Vision Applications

Science.gov (United States)

Shen, Changsong; Little, James J.; Fels, Sidney

Meeting constraints for real-time performance is a main issue for computer vision, especially for embedded computer vision systems. This chapter presents our progress on our open vision library (OpenVL), a novel software architecture to address efficiency through facilitating hardware acceleration, reusability, and scalability for computer vision systems. A logical image understanding pipeline is introduced to allow parallel processing. We also discuss progress on our middleware—vision library utility toolkit (VLUT)—that enables applications to operate transparently over a heterogeneous collection of hardware implementations. OpenVL works as a state machine,with an event-driven mechanismto provide users with application-level interaction. Various explicit or implicit synchronization and communication methods are supported among distributed processes in the logical pipelines. The intent of OpenVL is to allow users to quickly and easily recover useful information from multiple scenes, in a cross-platform, cross-language manner across various software environments and hardware platforms. To validate the critical underlying concepts of OpenVL, a human tracking system and a local positioning system are implemented and described. The novel architecture separates the specification of algorithmic details from the underlying implementation, allowing for different components to be implemented on an embedded system without recompiling code.
Attitudes towards using mobile applications for teaching mathematics in open learning systems

Directory of Open Access Journals (Sweden)

Bahjat Hamid Altakhyneh

2018-05-01

Full Text Available This study investigated attitudes towards teaching mathematics via mobile learning in open learning systems. The sample of the study consisted of 57 male and female students enrolled in the mathematics course in the department of educational studies at the Arab Open University/ Jordan for the academic year 2016/2017. Results of the study showed that positive student attitudes toward using mobile applications reached 80%. Each of the following scores is ranked as ascending: mathematical thinking (75%, achievement motivation (76%, developing social and emotional skills (77%, and application technology (96%. There was no statistical significance difference (α ≤0.01 between the variable type of general secondary certificate (scientific / arts stream as well as the nature of employment in terms of whether the learner was either an employee or non-employee. In light of results of the study, the researcher recommends using mobile applications in teaching courses of mathematics in open learning systems.
Hysteresis of magnetostructural transitions: Repeatable and non-repeatable processes

Science.gov (United States)

Provenzano, Virgil; Della Torre, Edward; Bennett, Lawrence H.; ElBidweihy, Hatem

2014-02-01

The Gd5Ge2Si2 alloy and the off-stoichiometric Ni50Mn35In15 Heusler alloy belong to a special class of metallic materials that exhibit first-order magnetostructural transitions near room temperature. The magnetic properties of this class of materials have been extensively studied due to their interesting magnetic behavior and their potential for a number of technological applications such as refrigerants for near-room-temperature magnetic refrigeration. The thermally driven first-order transitions in these materials can be field-induced in the reverse order by applying a strong enough field. The field-induced transitions are typically accompanied by the presence of large magnetic hysteresis, the characteristics of which are a complicated function of temperature, field, and magneto-thermal history. In this study we show that the virgin curve, the major loop, and sequentially measured MH loops are the results of both repeatable and non-repeatable processes, in which the starting magnetostructural state, prior to the cycling of field, plays a major role. Using the Gd5Ge2Si2 and Ni50Mn35In15 alloys, as model materials, we show that a starting single phase state results in fully repeatable processes and large magnetic hysteresis, whereas a mixed phase starting state results in non-repeatable processes and smaller hysteresis.
Hysteresis of magnetostructural transitions: Repeatable and non-repeatable processes

International Nuclear Information System (INIS)

Provenzano, Virgil; Della Torre, Edward; Bennett, Lawrence H.; ElBidweihy, Hatem

2014-01-01

The Gd 5 Ge 2 Si 2 alloy and the off-stoichiometric Ni 50 Mn 35 In 15 Heusler alloy belong to a special class of metallic materials that exhibit first-order magnetostructural transitions near room temperature. The magnetic properties of this class of materials have been extensively studied due to their interesting magnetic behavior and their potential for a number of technological applications such as refrigerants for near-room-temperature magnetic refrigeration. The thermally driven first-order transitions in these materials can be field-induced in the reverse order by applying a strong enough field. The field-induced transitions are typically accompanied by the presence of large magnetic hysteresis, the characteristics of which are a complicated function of temperature, field, and magneto-thermal history. In this study we show that the virgin curve, the major loop, and sequentially measured MH loops are the results of both repeatable and non-repeatable processes, in which the starting magnetostructural state, prior to the cycling of field, plays a major role. Using the Gd 5 Ge 2 Si 2 and Ni 50 Mn 35 In 15 alloys, as model materials, we show that a starting single phase state results in fully repeatable processes and large magnetic hysteresis, whereas a mixed phase starting state results in non-repeatable processes and smaller hysteresis
Novel CO2 laser robotic controller outperforms experienced laser operators in tasks of accuracy and performance repeatability.

Science.gov (United States)

Wong, Yu-Tung; Finley, Charles C; Giallo, Joseph F; Buckmire, Robert A

2011-08-01

To introduce a novel method of combining robotics and the CO(2) laser micromanipulator to provide excellent precision and performance repeatability designed for surgical applications. Pilot feasibility study. We developed a portable robotic controller that appends to a standard CO(2) laser micromanipulator. The robotic accuracy and laser beam path repeatability were compared to six experienced users of the industry standard micromanipulator performing the same simulated surgical tasks. Helium-neon laser beam video tracking techniques were employed. The robotic controller demonstrated superiority over experienced human manual micromanipulator control in accuracy (laser path within 1 mm of idealized centerline), 97.42% (standard deviation [SD] 2.65%), versus 85.11% (SD 14.51%), P = .018; and laser beam path repeatability (area of laser path divergence on successive trials), 21.42 mm(2) (SD 4.35 mm(2) ) versus 65.84 mm(2) (SD 11.93 mm(2) ), P = .006. Robotic micromanipulator control enhances accuracy and repeatability for specific laser tasks. Computerized control opens opportunity for alternative user interfaces and additional safety features. Copyright © 2011 The American Laryngological, Rhinological, and Otological Society, Inc.
An open source, 3D printed preclinical MRI phantom for repeated measures of contrast agents and reference standards.

Science.gov (United States)

Cox, B L; Ludwig, K D; Adamson, E B; Eliceiri, K W; Fain, S B

2018-03-01

In medical imaging, clinicians, researchers and technicians have begun to use 3D printing to create specialized phantoms to replace commercial ones due to their customizable and iterative nature. Presented here is the design of a 3D printed open source, reusable magnetic resonance imaging (MRI) phantom, capable of flood-filling, with removable samples for measurements of contrast agent solutions and reference standards, and for use in evaluating acquisition techniques and image reconstruction performance. The phantom was designed using SolidWorks, a computer-aided design software package. The phantom consists of custom and off-the-shelf parts and incorporates an air hole and Luer Lock system to aid in flood filling, a marker for orientation of samples in the filled mode and bolt and tube holes for assembly. The cost of construction for all materials is under $90. All design files are open-source and available for download. To demonstrate utility, B 0 field mapping was performed using a series of gadolinium concentrations in both the unfilled and flood-filled mode. An excellent linear agreement (R 2 >0.998) was observed between measured relaxation rates (R 1 /R 2 ) and gadolinium concentration. The phantom provides a reliable setup to test data acquisition and reconstruction methods and verify physical alignment in alternative nuclei MRI techniques (e.g. carbon-13 and fluorine-19 MRI). A cost-effective, open-source MRI phantom design for repeated quantitative measurement of contrast agents and reference standards in preclinical research is presented. Specifically, the work is an example of how the emerging technology of 3D printing improves flexibility and access for custom phantom design.
Evaluation of 13 short tandem repeated loci for use in personal identification applications

Energy Technology Data Exchange (ETDEWEB)

Hammond, H.A.; Caskey, C.T. (Baylor College of Medicine, Houston, TX (United States)); Jin, L.; Zhong, Y.; Chakraborty, R. (Univ. of Texas Graduate School of Biomedical Sciences, Houston, TX (United States))

1994-07-01

Personal identification by using DNA typing methodologies has been an issue in the popular and scientific press for several years. The authors present a PCR-based DNA-typing method using 13 unlinked short tandem repeat (STR) loci. Validation of the loci and methodology has been performed to meet standards set by the forensic community and the accrediting organization for parentage testing. Extensive statistical analysis has addressed the issues surrounding the presentation of [open quotes]match[close quotes] statistics. The authors have found STR loci to provide a rapid, sensitive, and reliable method of DNA typing for parentage testing, forensic identification, and medical diagnostics. Valid statistical analysis is generally simpler than similar analysis of RFLP-VNTR results and provides powerful statistical evidence of the low frequency of random multilocus genotype matching. 54 refs., 4 figs., 6 tabs.
Low cost open data acquisition system for biomedical applications

Science.gov (United States)

Zabolotny, Wojciech M.; Laniewski-Wollk, Przemyslaw; Zaworski, Wojciech

2005-09-01

In the biomedical applications it is often necessary to collect measurement data from different devices. It is relatively easy, if the devices are equipped with a MIB or Ethernet interface, however often they feature only the asynchronous serial link, and sometimes the measured values are available only as the analog signals. The system presented in the paper is a low cost alternative to commercially available data acquisition systems. The hardware and software architecture of the system is fully open, so it is possible to customize it for particular needs. The presented system offers various possibilities to connect it to the computer based data processing unit - e.g. using the USB or Ethernet ports. Both interfaces allow also to use many such systems in parallel to increase amount of serial and analog inputs. The open source software used in the system makes possible to process the acquired data with standard tools like MATLAB, Scilab or Octave, or with a dedicated, user supplied application.
APPLICATION OF MALARIA DETECTION OF DRAWING BLOOD CELLS USING MICROSCOPIC OpenCV

Directory of Open Access Journals (Sweden)

Antonius Herusutopo

2011-10-01

literature studies about computer division with OpenCV and data collection of microscopic of blood sample. Analysis method includes process, detection procedure and malaria diagnosis. While design method includes steps of detection implementation and diagnosis to the application program, coding and continued with evaluation.MalariaMalaria parasites in human have a life cycle that requires a human host and mosquito host. In the anopheles mosquito, plasmodium does sexual reproduction. In humans, these parasites asexual reproduction, starting in the liver cells (hepatocytes, then repeatedly in the red blood cells (erythrocytes.While an infected female anopheles mosquito is sucking human’s blood, at the same time the mosquito inserts its saliva that is to keep the capillary vessels, which is inhaled not forming a blood clots factor that causes the blood flow stops. At this time the parasite creates sporozoites to enter the blood flow and infect hepatocytes. For one until two weeks (depends on plasmodium species, each sporozoites creates schizont; a structure that contains thousands of merozoites. When schizont is mature, hepatocytes will rupture and release merozoites to blood flow.In plasmodium vivax and plasmodium ovale, sporozoites develops into hipnozoit; a form of plasmodium that in dorman phase during several months to years. When hipnozoit re-activate, they will evolve into schizont that will cause recurrent symptoms to the infected person.Next is the merozoites, which is released to the blood flow, will invade erythrocyte then they will grow and consume hemoglobin. In erythrocyte, half of merozoites will grow to another phase of asexual, which creates schizont filled with merozoites. When schizont is mature, the cell will rupture and merozoites will be released and invade erythrocyte.
OpenVX-based Python Framework for real-time cross platform acceleration of embedded computer vision applications

Directory of Open Access Journals (Sweden)

Ori Heimlich

2016-11-01

Full Text Available Embedded real-time vision applications are being rapidly deployed in a large realm of consumer electronics, ranging from automotive safety to surveillance systems. However, the relatively limited computational power of embedded platforms is considered as a bottleneck for many vision applications, necessitating optimization. OpenVX is a standardized interface, released in late 2014, in an attempt to provide both system and kernel level optimization to vision applications. With OpenVX, Vision processing are modeled with coarse-grained data flow graphs, which can be optimized and accelerated by the platform implementer. Current full implementations of OpenVX are given in the programming language C, which does not support advanced programming paradigms such as object-oriented, imperative and functional programming, nor does it have runtime or type-checking. Here we present a python-based full Implementation of OpenVX, which eliminates much of the discrepancies between the object-oriented paradigm used by many modern applications and the native C implementations. Our open-source implementation can be used for rapid development of OpenVX applications in embedded platforms. Demonstration includes static and real-time image acquisition and processing using a Raspberry Pi and a GoPro camera. Code is given as supplementary information. Code project and linked deployable virtual machine are located on GitHub: https://github.com/NBEL-lab/PythonOpenVX.
Comparative Pharmacokinetics of Cefquinome (Cobactan 2.5% following Repeated Intramuscular Administrations in Sheep and Goats

Directory of Open Access Journals (Sweden)

Mohamed El-Hewaity

2014-01-01

Full Text Available The comparative pharmacokinetic profile of cefquinome was studied in sheep and goats following repeated intramuscular (IM administrations of 2 mg/kg body weight. Cefquinome concentrations in serum were determined by microbiological assay technique using Micrococcus luteus (ATCC 9341 as test organism. Following intramuscular injection of cefquinome in sheep and goats, the disposition curves were best described by two-compartment open model in both sheep and goats. The pharmacokinetics of cefquinome did not differ significantly between sheep and goats; similar intramuscular dose rate of cefquinome should therefore be applicable to both species. On comparing the data of serum levels of repeated intramuscular injections with first intramuscular injection, it was revealed that repeated intramuscular injections of cefquinome have cumulative effect in both species sheep and goats. The in vitro serum protein-binding tendency was 15.65% in sheep and 14.42% in goats. The serum concentrations of cefquinome along 24 h after injection in this study were exceeding the MICs of different susceptible microorganisms responsible for serious disease problems. These findings indicate successful use of cefquinome in sheep and goats.
Time-Dependent Density Functional Theory for Open Systems and Its Applications.

Science.gov (United States)

Chen, Shuguang; Kwok, YanHo; Chen, GuanHua

2018-02-20

Photovoltaic devices, electrochemical cells, catalysis processes, light emitting diodes, scanning tunneling microscopes, molecular electronics, and related devices have one thing in common: open quantum systems where energy and matter are not conserved. Traditionally quantum chemistry is confined to isolated and closed systems, while quantum dissipation theory studies open quantum systems. The key quantity in quantum dissipation theory is the reduced system density matrix. As the reduced system density matrix is an O(M! × M!) matrix, where M is the number of the particles of the system of interest, quantum dissipation theory can only be employed to simulate systems of a few particles or degrees of freedom. It is thus important to combine quantum chemistry and quantum dissipation theory so that realistic open quantum systems can be simulated from first-principles. We have developed a first-principles method to simulate the dynamics of open electronic systems, the time-dependent density functional theory for open systems (TDDFT-OS). Instead of the reduced system density matrix, the key quantity is the reduced single-electron density matrix, which is an N × N matrix where N is the number of the atomic bases of the system of interest. As the dimension of the key quantity is drastically reduced, the TDDFT-OS can thus be used to simulate the dynamics of realistic open electronic systems and efficient numerical algorithms have been developed. As an application, we apply the method to study how quantum interference develops in a molecular transistor in time domain. We include electron-phonon interaction in our simulation and show that quantum interference in the given system is robust against nuclear vibration not only in the steady state but also in the transient dynamics. As another application, by combining TDDFT-OS with Ehrenfest dynamics, we study current-induced dissociation of water molecules under scanning tunneling microscopy and follow its time dependent
In silico reversal of repeat-induced point mutation (RIP identifies the origins of repeat families and uncovers obscured duplicated genes

Directory of Open Access Journals (Sweden)

Hane James K

2010-11-01

Full Text Available Abstract Background Repeat-induced point mutation (RIP is a fungal genome defence mechanism guarding against transposon invasion. RIP mutates the sequence of repeated DNA and over time renders the affected regions unrecognisable by similarity search tools such as BLAST. Results DeRIP is a new software tool developed to predict the original sequence of a RIP-mutated region prior to the occurrence of RIP. In this study, we apply deRIP to the genome of the wheat pathogen Stagonospora nodorum SN15 and predict the origin of several previously uncharacterised classes of repetitive DNA. Conclusions Five new classes of transposon repeats and four classes of endogenous gene repeats were identified after deRIP. The deRIP process is a new tool for fungal genomics that facilitates the identification and understanding of the role and origin of fungal repetitive DNA. DeRIP is open-source and is available as part of the RIPCAL suite at http://www.sourceforge.net/projects/ripcal.
Impact of repeated long term application of atrazine on soil properties and bound residues formation

International Nuclear Information System (INIS)

Behki, R.; Khan, S.U.

2001-01-01

The effect of repeated long term application of the herbicide atrazine on the activities of microorganisms, enzymes, as well as on the bound residues formation, was investigated. Bacteria, fungi and soil respiration were in general inhibited in the first year of application. However, in the second and third year no such trend was observed. Similarly, a decreasing trend in the Fe(III)-reduction, nitrification and arginine deamination was observed in the first year whereas in the subsequent two years no such trend was prominent. The dehydrogenase and arylsulfatase activities showed an increasing trend after the application of the herbicide. Column studies showed that extractable residues of atrazine and carbofuran gradually decreased after the application of the pesticides. Amendments of the soil containing 14 C-bound residues did not increase 14 CO 2 evolution. Unextractable 14 C was higher and mineralization of 14 C-2,4-D was lower in previously untreated soil than in soils with histories of atrazine and carbofuran application. (author)

An Open-Structure Treadmill Gait Trainer: From Research to Application

OpenAIRE

Li, Jian; Chen, Diansheng; Fan, Yubo

2017-01-01

Lower limb rehabilitation robots are designed to enhance gait function in individuals with motor impairments. Although numerous rehabilitation robots have been developed, only few of these robots have been used in practical health care, particularly in China. The objective of this study is to construct a lower limb rehabilitation robot and bridge the gap between research and application. Open structure to facilitate practical application was created for the whole robot. Three typical movement...
Parallel Resolved Open Source CFD-DEM: Method, Validation and Application

Directory of Open Access Journals (Sweden)

A. Hager

2014-03-01

Full Text Available In the following paper the authors present a fully parallelized Open Source method for calculating the interaction of immersed bodies and surrounding fluid. A combination of computational fluid dynamics (CFD and a discrete element method (DEM accounts for the physics of both the fluid and the particles. The objects considered are relatively big compared to the cells of the fluid mesh, i.e. they cover several cells each. Thus this fictitious domain method (FDM is called resolved. The implementation is realized within the Open Source framework CFDEMcOupling (www.cfdem.com, which provides an interface between OpenFOAM® based CFD-solvers and the DEM software LIGGGHTS (www.liggghts.com. While both LIGGGHTS and OpenFOAM® were already parallelized, only a recent improvement of the algorithm permits the fully parallel computation of resolved problems. Alongside with a detailed description of the method, its implementation and recent improvements, a number of application and validation examples is presented in the scope of this paper.
Harvest: an open platform for developing web-based biomedical data discovery and reporting applications.

Science.gov (United States)

Pennington, Jeffrey W; Ruth, Byron; Italia, Michael J; Miller, Jeffrey; Wrazien, Stacey; Loutrel, Jennifer G; Crenshaw, E Bryan; White, Peter S

2014-01-01

Biomedical researchers share a common challenge of making complex data understandable and accessible as they seek inherent relationships between attributes in disparate data types. Data discovery in this context is limited by a lack of query systems that efficiently show relationships between individual variables, but without the need to navigate underlying data models. We have addressed this need by developing Harvest, an open-source framework of modular components, and using it for the rapid development and deployment of custom data discovery software applications. Harvest incorporates visualizations of highly dimensional data in a web-based interface that promotes rapid exploration and export of any type of biomedical information, without exposing researchers to underlying data models. We evaluated Harvest with two cases: clinical data from pediatric cardiology and demonstration data from the OpenMRS project. Harvest's architecture and public open-source code offer a set of rapid application development tools to build data discovery applications for domain-specific biomedical data repositories. All resources, including the OpenMRS demonstration, can be found at http://harvest.research.chop.edu.
Open Source Platform Application to Groundwater Characterization and Monitoring

Science.gov (United States)

Ntarlagiannis, D.; Day-Lewis, F. D.; Falzone, S.; Lane, J. W., Jr.; Slater, L. D.; Robinson, J.; Hammett, S.

2017-12-01

Groundwater characterization and monitoring commonly rely on the use of multiple point sensors and human labor. Due to the number of sensors, labor, and other resources needed, establishing and maintaining an adequate groundwater monitoring network can be both labor intensive and expensive. To improve and optimize the monitoring network design, open source software and hardware components could potentially provide the platform to control robust and efficient sensors thereby reducing costs and labor. This work presents early attempts to create a groundwater monitoring system incorporating open-source software and hardware that will control the remote operation of multiple sensors along with data management and file transfer functions. The system is built around a Raspberry PI 3, that controls multiple sensors in order to perform on-demand, continuous or `smart decision' measurements while providing flexibility to incorporate additional sensors to meet the demands of different projects. The current objective of our technology is to monitor exchange of ionic tracers between mobile and immobile porosity using a combination of fluid and bulk electrical-conductivity measurements. To meet this objective, our configuration uses four sensors (pH, specific conductance, pressure, temperature) that can monitor the fluid electrical properties of interest and guide the bulk electrical measurement. This system highlights the potential of using open source software and hardware components for earth sciences applications. The versatility of the system makes it ideal for use in a large number of applications, and the low cost allows for high resolution (spatially and temporally) monitoring.
Development of WEB Applications of The Component – Open Source

Directory of Open Access Journals (Sweden)

Arturo Sergio Medina Castillo

2013-06-01

Full Text Available Nowadays software development not starting from scratch, however already has a set of tools provided by frameworks, which enables faster application development, relevant and indispensable factor for supporting continuous improvement processes seeking higher levels of competitiveness in this global society.In all respects the development of Web applications, whether open source or proprietary, is developing rapidly, by providing service levels of communication, interoperability, access to internal and external customers that allows management support different business processes.
Optimized Carrier Based Multilevel Generated Modified Dual Three-Phase Open-Winding Inverter for Medium Power Applications

DEFF Research Database (Denmark)

Padmanaban, Sanjeevi Kumar; Blaabjerg, Frede; Wheeler, Patrick

2016-01-01

This paper presents a novel carrier based multilevel modulation for modified dual three-phase open-winding inverter applicable for low-voltage/high-current applications. A standard three-phase voltage source inverter (VSI) is connected across the open-winding of both ends of the motor. Each VSI i...
Automated genotyping of dinucleotide repeat markers

Energy Technology Data Exchange (ETDEWEB)

Perlin, M.W.; Hoffman, E.P. [Carnegie Mellon Univ., Pittsburgh, PA (United States)]|[Univ. of Pittsburgh, PA (United States)

1994-09-01

The dinucleotide repeats (i.e., microsatellites) such as CA-repeats are a highly polymorphic, highly abundant class of PCR-amplifiable markers that have greatly streamlined genetic mapping experimentation. It is expected that over 30,000 such markers (including tri- and tetranucleotide repeats) will be characterized for routine use in the next few years. Since only size determination, and not sequencing, is required to determine alleles, in principle, dinucleotide repeat genotyping is easily performed on electrophoretic gels, and can be automated using DNA sequencers. Unfortunately, PCR stuttering with these markers generates not one band for each allele, but a pattern of bands. Since closely spaced alleles must be disambiguated by human scoring, this poses a key obstacle to full automation. We have developed methods that overcome this obstacle. Our model is that the observed data is generated by arithmetic superposition (i.e., convolution) of multiple allele patterns. By quantitatively measuring the size of each component band, and exploiting the unique stutter pattern associated with each marker, closely spaced alleles can be deconvolved; this unambiguously reconstructs the {open_quotes}true{close_quotes} allele bands, with stutter artifact removed. We used this approach in a system for automated diagnosis of (X-linked) Duchenne muscular dystrophy; four multiplexed CA-repeats within the dystrophin gene were assayed on a DNA sequencer. Our method accurately detected small variations in gel migration that shifted the allele size estimate. In 167 nonmutated alleles, 89% (149/167) showed no size variation, 9% (15/167) showed 1 bp variation, and 2% (3/167) showed 2 bp variation. We are currently developing a library of dinucleotide repeat patterns; together with our deconvolution methods, this library will enable fully automated genotyping of dinucleotide repeats from sizing data.
Compound list: hexachlorobenzene [Open TG-GATEs

Lifescience Database Archive (English)

Full Text Available hexachlorobenzene HCB 00022 ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/...Human/in_vitro/hexachlorobenzene.Human.in_vitro.Liver.zip ftp://ftp.biosciencedbc.jp/archive/open-tggates/LA...TEST/Rat/in_vitro/hexachlorobenzene.Rat.in_vitro.Liver.zip ftp://ftp.biosciencedbc.jp/archive/open-tggates/L...ATEST/Rat/in_vivo/Liver/Single/hexachlorobenzene.Rat.in_vivo.Liver.Single.zip ftp...://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Rat/in_vivo/Liver/Repeat/hexachlorobenzene.Rat.in_vivo.L
Compound list: cyclophosphamide [Open TG-GATEs

Lifescience Database Archive (English)

Full Text Available cyclophosphamide CPA 00024 ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/H...uman/in_vitro/cyclophosphamide.Human.in_vitro.Liver.zip ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATE...ST/Rat/in_vitro/cyclophosphamide.Rat.in_vitro.Liver.zip ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATE...ST/Rat/in_vivo/Liver/Single/cyclophosphamide.Rat.in_vivo.Liver.Single.zip ftp://f...tp.biosciencedbc.jp/archive/open-tggates/LATEST/Rat/in_vivo/Liver/Repeat/cyclophosphamide.Rat.in_vivo.Liver.
Compound list: bromoethylamine [Open TG-GATEs

Lifescience Database Archive (English)

Full Text Available bromoethylamine BEA 00134 ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Human/in_vitro/bromoethylam...ine.Human.in_vitro.Liver.zip ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST...Rat/in_vivo/Liver/Single/bromoethylamine.Rat.in_vivo.Liver.Single.zip ftp://ftp.b...iosciencedbc.jp/archive/open-tggates/LATEST/Rat/in_vivo/Liver/Repeat/bromoethylamine.Rat.in_vivo.Liver.Repea...t.zip ftp://ftp.biosciencedbc.jp/archive/open-tggates/LATEST/Rat/in_vivo/Kidney/Single/bromoethylamine.Rat.i
Repeated compost application effects on phosphorus runoff in the Virginia Piedmont.

Science.gov (United States)

Spargo, John T; Evanylo, Gregory K; Alley, Marcus M

2006-01-01

Increasing amounts of animal and municipal wastes are being composted before land application to improve handling and spreading characteristics, and to reduce odor and disease incidence. Repeated applications of composted biosolids and manure to cropland may increase the risk for P enrichment of agricultural runoff. We conducted field research in 2003 and 2004 on a Fauquier silty clay loam (Ultic Hapludalfs) to compare the effects of annual (since 1999) applications of composted and uncomposted organic residuals on P runoff characteristics. Biosolids compost (BSC), poultry litter-yard waste compost (PLC), and uncomposted poultry litter (PL) were applied based on estimated plant-available N. A commercial fertilizer treatment (CF) and an unamended control treatment (CTL) were also included. Corn (Zea mays L.) and a cereal rye (Secale cereal L.) cover crop were planted each year. We applied simulated rainfall in fall 2004 and analyzed runoff for dissolved reactive P (DRP), total dissolved P (TDP), total P (TP), total organic C (TOC), and total suspended solids (TSS). End of season soil samples were analyzed for Mehlich-3 P (M3P), EPA 3050 P (3050P), water soluble P (WSP), degree of P saturation (DPS), soil C, and bulk density. Compost treatments significantly increased soil C, decreased bulk density, and increased M3P, 3050P, WSP, and DPS. The concentration of DRP, TDP, and TP in runoff was highest in compost treatments, but the mass of DRP and TDP was not different among treatments because infiltration was higher and runoff lower in compost-amended soil. Improved soil physical properties associated with poultry litter-yard waste compost application decreased loss of TP and TSS.
Integrating linked open data in mobile augmented reality applications - a case study

Directory of Open Access Journals (Sweden)

Silviu Vert

2015-02-01

Full Text Available In this paper we develop a model and implement a prototype that integrates user-generated linked open data and open government data in a mobile augmented reality tourism application that works in the browser of the mobile device. We present some challenges met in this endeavour and solutions to overcome them, as well as propose further issues that should be addressed by research in this field.
Advances in the development and application of an open source model server for building information

NARCIS (Netherlands)

Beetz, J.; van Berlo, L.A.H.M.; Laat, de R.; Bonsma, P.

2011-01-01

The need for Building Information Model (BIM) servers to facilitate collaboration has been repeatedly reported in literature and stated by industry practitioners. To date, only a few commercial implementations of model servers are available. However, these applications are either limited to
Multi-criteria indexes to evaluate the effects of repeated organic amendment applications on soil quality

Science.gov (United States)

Obriot, Fiona; Stauffer, Marie; Goubard, Yolaine; Vieuble-Gonod, Laure; Revallier, Agathe; Houot, Sabine

2015-04-01

Objectives The soil application of organic waste products (OWP) favours the recycling of nutrients, the crop production, the increase of soil biological activity and biodiversity. It may also lead to soil contamination. All these effects occurred simultaneously and must be considered in the evaluation of the practice. This study aims at deciphering the long-term impact of repeated applications and the short-term effect of an additional application on soil quality using 5 different Soil Quality Indices (SQI)[a]: fertility, microbial activity, biodiversity, physical properties and productivity and one pollution index by heavy metals. Methodology A long term field experiment was used (QualiAgro, Ile de France) where repeated applications of 4 amendments (a municipal solid waste compost, MSW; a biowaste compost, BIO; a co-compost of sewage sludge and green waste, GWS and a farmyard manure, FYM) have differentiated soil characteristics and crop production compared to a control treatments without organic residue and receiving mineral fertilizer or not (CONT+N and CONT). The OWP are applied every 2 years, in September, at doses equivalent to 4 t C/ha (4 replicates) on a maize-wheat succession. We used 2 sampling dates: 3 weeks before application (cumulative residual effect of 7 applications) and 3 weeks just after the 8th application (short-term additional effect of a recent application), in 2011. More than 30 different variables were used: chemical (pH, Polsen…), physical (bulk density, plasticity…) and biological (microbial biomass, enzymatic activity…) soil indicators. All of these were classified in 6 classes: fertility, microbial activity, biodiversity, physical properties, productivity and pollution. Five SQI and one pollution index by heavy metals were estimated using a weighted additive index calculation method described by Velasquez et al. (2007)[a]. Only parameters with statistically significant differences (peffect on the SQI. Physical properties
Identification, variation and transcription of pneumococcal repeat sequences

Science.gov (United States)

2011-01-01

Background Small interspersed repeats are commonly found in many bacterial chromosomes. Two families of repeats (BOX and RUP) have previously been identified in the genome of Streptococcus pneumoniae, a nasopharyngeal commensal and respiratory pathogen of humans. However, little is known about the role they play in pneumococcal genetics. Results Analysis of the genome of S. pneumoniae ATCC 700669 revealed the presence of a third repeat family, which we have named SPRITE. All three repeats are present at a reduced density in the genome of the closely related species S. mitis. However, they are almost entirely absent from all other streptococci, although a set of elements related to the pneumococcal BOX repeat was identified in the zoonotic pathogen S. suis. In conjunction with information regarding their distribution within the pneumococcal chromosome, this suggests that it is unlikely that these repeats are specialised sequences performing a particular role for the host, but rather that they constitute parasitic elements. However, comparing insertion sites between pneumococcal sequences indicates that they appear to transpose at a much lower rate than IS elements. Some large BOX elements in S. pneumoniae were found to encode open reading frames on both strands of the genome, whilst another was found to form a composite RNA structure with two T box riboswitches. In multiple cases, such BOX elements were demonstrated as being expressed using directional RNA-seq and RT-PCR. Conclusions BOX, RUP and SPRITE repeats appear to have proliferated extensively throughout the pneumococcal chromosome during the species' past, but novel insertions are currently occurring at a relatively slow rate. Through their extensive secondary structures, they seem likely to affect the expression of genes with which they are co-transcribed. Software for annotation of these repeats is freely available from ftp://ftp.sanger.ac.uk/pub/pathogens/strep_repeats/. PMID:21333003
Open Source, Openness, and Higher Education

Science.gov (United States)

Wiley, David

2006-01-01

In this article David Wiley provides an overview of how the general expansion of open source software has affected the world of education in particular. In doing so, Wiley not only addresses the development of open source software applications for teachers and administrators, he also discusses how the fundamental philosophy of the open source…
Repeated Predictable Stress Causes Resilience against Colitis-Induced Behavioral Changes in Mice

Directory of Open Access Journals (Sweden)

Ahmed M Hassan

2014-11-01

Full Text Available Inflammatory bowel disease is associated with an increased risk of mental disorders and can be exacerbated by stress. In this study which was performed with male 10-week old C57Bl/6N mice, we used dextran sulfate sodium (DSS-induced colitis to evaluate behavioral changes caused by intestinal inflammation, to assess the interaction between repeated psychological stress (water avoidance stress, WAS and colitis in modifying behavior, and to analyze neurochemical correlates of this interaction. A 7-day treatment with DSS (2 % in drinking water decreased locomotion and enhanced anxiety-like behavior in the open field test and reduced social interaction. Repeated exposure to WAS for 7 days had little influence on behavior but prevented the DSS-induced behavioral disturbances in the open field and social interaction tests. In contrast, repeated WAS did not modify colon length, colonic myeloperoxidase content and circulating proinflammatory cytokines, parameters used to assess colitis severity. DSS-induced colitis was associated with an increase in circulating neuropeptide Y (NPY, a rise in the hypothalamic expression of cyclooxygenase-2 mRNA and a decrease in the hippocampal expression of NPY mRNA, brain-derived neurotrophic factor mRNA and mineralocorticoid receptor mRNA. Repeated WAS significantly decreased the relative expression of corticotropin-releasing factor mRNA in the hippocampus. The effect of repeated WAS to blunt the DSS-evoked behavioral disturbances was associated with a rise of circulating corticosterone and an increase in the expression of hypothalamic NPY mRNA. These results show that experimental colitis leads to a particular range of behavioral alterations which can be prevented by repeated WAS, a model of predictable chronic stress, while the severity of colitis remains unabated. We conclude that the mechanisms underlying the resilience effect of repeated WAS involves hypothalamic NPY and the hypothalamic-pituitary-adrenal axis.
Implementing OpenShift

CERN Document Server

Miller, Adam

2013-01-01

A standard tutorial-based approach to using OpenShift and deploying custom or pre-built web applications to the OpenShift Online cloud.This book is for software developers and DevOps alike who are interested in learning how to use the OpenShift Platform-as-a-Service for developing and deploying applications, how the environment works on the back end, and how to deploy their very own open source Platform-as-a-Service based on the upstream OpenShift Origin project.
77 FR 13261 - Request for Applications: The Community Forest and Open Space Conservation Program

Science.gov (United States)

2012-03-06

... DEPARTMENT OF AGRICULTURE Forest Service Request for Applications: The Community Forest and Open Space Conservation Program AGENCY: Forest Service. ACTION: Notice; Correction. SUMMARY: The Department..., published a document in the Federal Register of February 15, 2011, concerning requests for applications for...
Policy analysis and recommendations for the open source application development portal (OSADP).

Science.gov (United States)

2012-06-01

This white paper addresses the policy and institutional issues that are associated with the development of an open source applications development portal (OSADP), part of a larger research effort being conducted under the ITS Programs Dynamic Mobi...

Results of repeated antireflux operations on hiatal hernias

Directory of Open Access Journals (Sweden)

Khubolov A.M.

2016-06-01

Full Text Available The research goal: to carry out the retrospective analysis of results of repeated antireflux interventions at the recurrent hernias of an esophageal opening of a diaphragm (HEOD. Material and methods. Results of surgical treatment of 38 patients with recurrence of HEOD in various terms after operation are studied. Results. At the most part of patients at repeated operations anatomic prerequisites to formation of recurrence of HEOD — migration of a fundoplication cuff, insolvency, an excessive tension of tissues when forming the gastric coupling, violation of technology of imposing of a cuff come to light. In this regard, proceeding from these references and the analysis of own research, it has been considered that plasticity of local tissues at recurrent HEOD, is insufficient for reliable elimination of a gastroesopha-geal reflux. Conclusion. The analysis of the results of antireflux surgical treatment of HEOD with a reflux-esophageal phenomenon has shown high efficiency of no tension plasticity, with use of a synthetic artificial limb. The fundoplication technique in antireflux surgery with no tension plasticity may be used as an operation of choice at recurrent hernias of an esophageal opening of a diaphragm.
Development of Mixed Mode MPI / OpenMP Applications

Directory of Open Access Journals (Sweden)

Lorna Smith

2001-01-01

Full Text Available MPI / OpenMP mixed mode codes could potentially offer the most effective parallelisation strategy for an SMP cluster, as well as allowing the different characteristics of both paradigms to be exploited to give the best performance on a single SMP. This paper discusses the implementation, development and performance of mixed mode MPI / OpenMP applications. The results demonstrate that this style of programming will not always be the most effective mechanism on SMP systems and cannot be regarded as the ideal programming model for all codes. In some situations, however, significant benefit may be obtained from a mixed mode implementation. For example, benefit may be obtained if the parallel (MPI code suffers from: poor scaling with MPI processes due to load imbalance or too fine a grain problem size, memory limitations due to the use of a replicated data strategy, or a restriction on the number of MPI processes combinations. In addition, if the system has a poorly optimised or limited scaling MPI implementation then a mixed mode code may increase the code performance.
AMBIT RESTful web services: an implementation of the OpenTox application programming interface

Directory of Open Access Journals (Sweden)

Jeliazkova Nina

2011-05-01

Full Text Available Abstract The AMBIT web services package is one of the several existing independent implementations of the OpenTox Application Programming Interface and is built according to the principles of the Representational State Transfer (REST architecture. The Open Source Predictive Toxicology Framework, developed by the partners in the EC FP7 OpenTox project, aims at providing a unified access to toxicity data and predictive models, as well as validation procedures. This is achieved by i an information model, based on a common OWL-DL ontology ii links to related ontologies; iii data and algorithms, available through a standardized REST web services interface, where every compound, data set or predictive method has a unique web address, used to retrieve its Resource Description Framework (RDF representation, or initiate the associated calculations. The AMBIT web services package has been developed as an extension of AMBIT modules, adding the ability to create (Quantitative Structure-Activity Relationship (QSAR models and providing an OpenTox API compliant interface. The representation of data and processing resources in W3C Resource Description Framework facilitates integrating the resources as Linked Data. By uploading datasets with chemical structures and arbitrary set of properties, they become automatically available online in several formats. The services provide unified interfaces to several descriptor calculation, machine learning and similarity searching algorithms, as well as to applicability domain and toxicity prediction models. All Toxtree modules for predicting the toxicological hazard of chemical compounds are also integrated within this package. The complexity and diversity of the processing is reduced to the simple paradigm "read data from a web address, perform processing, write to a web address". The online service allows to easily run predictions, without installing any software, as well to share online datasets and models. The
AMBIT RESTful web services: an implementation of the OpenTox application programming interface.

Science.gov (United States)

Jeliazkova, Nina; Jeliazkov, Vedrin

2011-05-16

The AMBIT web services package is one of the several existing independent implementations of the OpenTox Application Programming Interface and is built according to the principles of the Representational State Transfer (REST) architecture. The Open Source Predictive Toxicology Framework, developed by the partners in the EC FP7 OpenTox project, aims at providing a unified access to toxicity data and predictive models, as well as validation procedures. This is achieved by i) an information model, based on a common OWL-DL ontology ii) links to related ontologies; iii) data and algorithms, available through a standardized REST web services interface, where every compound, data set or predictive method has a unique web address, used to retrieve its Resource Description Framework (RDF) representation, or initiate the associated calculations.The AMBIT web services package has been developed as an extension of AMBIT modules, adding the ability to create (Quantitative) Structure-Activity Relationship (QSAR) models and providing an OpenTox API compliant interface. The representation of data and processing resources in W3C Resource Description Framework facilitates integrating the resources as Linked Data. By uploading datasets with chemical structures and arbitrary set of properties, they become automatically available online in several formats. The services provide unified interfaces to several descriptor calculation, machine learning and similarity searching algorithms, as well as to applicability domain and toxicity prediction models. All Toxtree modules for predicting the toxicological hazard of chemical compounds are also integrated within this package. The complexity and diversity of the processing is reduced to the simple paradigm "read data from a web address, perform processing, write to a web address". The online service allows to easily run predictions, without installing any software, as well to share online datasets and models. The downloadable web application
The effects of repeated Ozurdex injections on ocular hypertension.

Science.gov (United States)

Bahadorani, Sepehr; Krambeer, Chelsey; Wannamaker, Kendall; Tie, Wayne; Jansen, Michael; Espitia, Jason; Sohn, Jeong-Hyeon; Singer, Michael A

2018-01-01

The purpose of this study was to correlate the degree of ocular hypertension with the number of Ozurdex injections. Intraocular pressure (IOP) fluctuations for a total of 183 injections were studied over a period of at least 12 months. The main indications for treatment were uveitis, diabetic macular edema, and retinal vein occlusion. Results of the study demonstrate that repeated Ozurdex injections do not increase the frequency of IOP spikes beyond 30 mmHg. For lower IOPs, however, a positive correlation exists. Furthermore, patients with primary open angle glaucoma and uveitis had the highest IOP response to repeated injections. On average, patients with an IOP of ≥28.6 mmHg received pressure lowering medications, after which their IOP reached a stable level (16.7 mmHg) without the need for additional interventions. The data support the conclusion that multiple Ozurdex injections does not increase the frequency of IOP spikes beyond 30 mmHg, but patients still must be closely monitored if they have a history of primary open angle glaucoma.
Spatiotemporal Land Use Change Analysis Using Open-source GIS and Web Based Application

Directory of Open Access Journals (Sweden)

Wan Yusryzal Wan Ibrahim

2015-05-01

Full Text Available Spatiotemporal changes are very important information to reveal the characteristics of the urbanization process. Sharing the information is beneficial for public awareness which then improves their participation in adaptive management for spatial planning process. Open-source software and web application are freely available tools that can be the best medium used by any individual or agencies to share this important information. The objective of the paper is to discuss on the spatiotemporal land use change in Iskandar Malaysia by using open-source GIS (Quantum GIS and publish them through web application (Mash-up. Land use in 1994 to 2011 were developed and analyzed to show the landscape change of the region. Subsequently, web application was setup to distribute the findings of the study. The result show there is significant changes of land use in the study area especially on the decline of agricultural and natural land which were converted to urban land uses. Residential and industrial areas largely replaced the agriculture and natural areas particularly along the coastal zone of the region. This information is published through interactive GIS web in order to share it with the public and stakeholders. There are some limitations of web application but still not hindering the advantages of using it. The integration of open-source GIS and web application is very helpful in sharing planning information particularly in the study area that experiences rapid land use and land cover change. Basic information from this study is vital for conducting further study such as projecting future land use change and other related studies in the area.
Applications of Open Source GMAW-Based Metal 3-D Printing

Directory of Open Access Journals (Sweden)

Yuenyong Nilsiam

2018-03-01

Full Text Available The metal 3-D printing market is currently dominated by high-end applications, which make it inaccessible for small and medium enterprises, fab labs, and individual makers who are interested in the ability to prototype and additively manufacture final products in metal. Recent progress led to low-cost open-source metal 3-D printers using a gas metal arc welding (GMAW-based print head. This reduced the cost of metal 3-D printers into the range of desktop prosumer polymer 3-D printers. Consequent research established good material properties of metal 3-D printed parts with readily-available weld filler wire, reusable substrates, thermal and stress properties, toolpath planning, bead-width control, mechanical properties, and support for overhangs. These previous works showed that GMAW-based metal 3-D printing has a good adhesion between layers and is not porous inside the printed parts, but they did not proceed far enough to demonstrate applications. In this study, the utility of the GMAW approach to 3-D printing is investigated using a low-cost open-source metal 3-D printer and a converted Computer Numerical Control router machine to make useful parts over a range of applications including: fixing an existing part by adding a 3-D metal feature, creating a product using the substrate as part of the component, 3-D printing in high resolution of useful objects, near net objects, and making an integrated product using a combination of steel and polymer 3-D printing. The results show that GMAW-based 3-D printing is capable of distributed manufacturing of useful products for a wide variety of applications for sustainable development.
Historic Learning Approach for Auto-tuning OpenACC Accelerated Scientific Applications

KAUST Repository

Siddiqui, Shahzeb

2015-04-17

The performance optimization of scientific applications usually requires an in-depth knowledge of the hardware and software. A performance tuning mechanism is suggested to automatically tune OpenACC parameters to adapt to the execution environment on a given system. A historic learning based methodology is suggested to prune the parameter search space for a more efficient auto-tuning process. This approach is applied to tune the OpenACC gang and vector clauses for a better mapping of the compute kernels onto the underlying architecture. Our experiments show a significant performance improvement against the default compiler parameters and drastic reduction in tuning time compared to a brute force search-based approach.
RNA FISH for detecting expanded repeats in human diseases.

Science.gov (United States)

Urbanek, Martyna O; Krzyzosiak, Wlodzimierz J

2016-04-01

RNA fluorescence in situ hybridization (FISH) is a widely used technique for detecting transcripts in fixed cells and tissues. Many variants of RNA FISH have been proposed to increase signal strength, resolution and target specificity. The current variants of this technique facilitate the detection of the subcellular localization of transcripts at a single molecule level. Among the applications of RNA FISH are studies on nuclear RNA foci in diseases resulting from the expansion of tri-, tetra-, penta- and hexanucleotide repeats present in different single genes. The partial or complete retention of mutant transcripts forming RNA aggregates within the nucleoplasm has been shown in multiple cellular disease models and in the tissues of patients affected with these atypical mutations. Relevant diseases include, among others, myotonic dystrophy type 1 (DM1) with CUG repeats, Huntington's disease (HD) and spinocerebellar ataxia type 3 (SCA3) with CAG repeats, fragile X-associated tremor/ataxia syndrome (FXTAS) with CGG repeats, myotonic dystrophy type 2 (DM2) with CCUG repeats, amyotrophic lateral sclerosis/frontotemporal dementia (ALS/FTD) with GGGGCC repeats and spinocerebellar ataxia type 32 (SCA32) with GGCCUG. In this article, we summarize the results obtained with FISH to examine RNA nuclear inclusions. We provide a detailed protocol for detecting RNAs containing expanded CAG and CUG repeats in different cellular models, including fibroblasts, lymphoblasts, induced pluripotent stem cells and murine and human neuronal progenitors. We also present the results of the first single-molecule FISH application in a cellular model of polyglutamine disease. Copyright © 2015 Elsevier Inc. All rights reserved.
Factors affecting the repeatability of gamma camera calibration for quantitative imaging applications using a sealed source

International Nuclear Information System (INIS)

Anizan, N; Wahl, R L; Frey, E C; Wang, H; Zhou, X C

2015-01-01

Several applications in nuclear medicine require absolute activity quantification of single photon emission computed tomography images. Obtaining a repeatable calibration factor that converts voxel values to activity units is essential for these applications. Because source preparation and measurement of the source activity using a radionuclide activity meter are potential sources of variability, this work investigated instrumentation and acquisition factors affecting repeatability using planar acquisition of sealed sources. The calibration factor was calculated for different acquisition and geometry conditions to evaluate the effect of the source size, lateral position of the source in the camera field-of-view (FOV), source-to-camera distance (SCD), and variability over time using sealed Ba-133 sources. A small region of interest (ROI) based on the source dimensions and collimator resolution was investigated to decrease the background effect. A statistical analysis with a mixed-effects model was used to evaluate quantitatively the effect of each variable on the global calibration factor variability. A variation of 1 cm in the measurement of the SCD from the assumed distance of 17 cm led to a variation of 1–2% in the calibration factor measurement using a small disc source (0.4 cm diameter) and less than 1% with a larger rod source (2.9 cm diameter). The lateral position of the source in the FOV and the variability over time had small impacts on calibration factor variability. The residual error component was well estimated by Poisson noise. Repeatability of better than 1% in a calibration factor measurement using a planar acquisition of a sealed source can be reasonably achieved. The best reproducibility was obtained with the largest source with a count rate much higher than the average background in the ROI, and when the SCD was positioned within 5 mm of the desired position. In this case, calibration source variability was limited by the quantum
基于OpenStack的虚拟桌面Spice的应用%Based on OpenStack virtual desktop applications of Spice

Institute of Scientific and Technical Information of China (English)

余康; 张鹏; 唐攀

2014-01-01

针对目前开源云平台OpenStack采用的VNC虚拟桌面在实际应用中存在着鼠标重影、屏幕无法自适应等不足之处，本文提出了一种新的OpenStack整合开源虚拟桌面传输协议Spice的虚拟桌面方案，该方案解决了目前OpenStack采用VNC虚拟桌面的不足之处，Spice协议较VNC有更强大的功能，能够提供更好的最终用户体验。%Open source cloud platform it has used VNC exist in actual application of the virtual desktop mouse ghosting, screen can't adaptive deficiency, such as this paper proposes a new open source virtual desktop transfer protocol Spice it integration of virtual desktop solution, the solution to solve the current deficiencies of the virtual desktop, it USES the VNC Spice protocol a VNC has more powerful functions, can provide a better end user experience.
Chromosome-specific DNA Repeat Probes

Energy Technology Data Exchange (ETDEWEB)

Baumgartner, Adolf; Weier, Jingly Fung; Weier, Heinz-Ulrich G.

2006-03-16

In research as well as in clinical applications, fluorescence in situ hybridization (FISH) has gained increasing popularity as a highly sensitive technique to study cytogenetic changes. Today, hundreds of commercially available DNA probes serve the basic needs of the biomedical research community. Widespread applications, however, are often limited by the lack of appropriately labeled, specific nucleic acid probes. We describe two approaches for an expeditious preparation of chromosome-specific DNAs and the subsequent probe labeling with reporter molecules of choice. The described techniques allow the preparation of highly specific DNA repeat probes suitable for enumeration of chromosomes in interphase cell nuclei or tissue sections. In addition, there is no need for chromosome enrichment by flow cytometry and sorting or molecular cloning. Our PCR-based method uses either bacterial artificial chromosomes or human genomic DNA as templates with {alpha}-satellite-specific primers. Here we demonstrate the production of fluorochrome-labeled DNA repeat probes specific for human chromosomes 17 and 18 in just a few days without the need for highly specialized equipment and without the limitation to only a few fluorochrome labels.
Compound list: 1% cholesterol + 0.25% sodium cholate [Open TG-GATEs

Lifescience Database Archive (English)

Full Text Available 1% cholesterol + 0.25% sodium cholate CH+DS-Na 00161 ftp://ftp.biosciencedbc.jp/arc...hive/open-tggates/LATEST/Rat/in_vivo/Liver/Repeat/1%25_cholesterol_%2B_0.25%25_sodium_cholate.Rat.in_vivo.Liver.Repeat.zip ...
Applications of Open Source 3-D Printing on Small Farms

Directory of Open Access Journals (Sweden)

Joshua M. Pearce

2013-12-01

Full Text Available There is growing evidence that low-cost open-source 3-D printers can reduce costs by enabling distributed manufacturing of substitutes for both specialty equipment and conventional mass-manufactured products. The rate of 3-D printable designs under open licenses is growing exponentially and there arealready hundreds of designs applicable to small-scale organic farming. It has also been hypothesized that this technology could assist sustainable development in rural communities that rely on small-scale organic agriculture. To gauge the present utility of open-source 3-D printers in this organic farm context both in the developed and developing world, this paper reviews the current open-source designs available and evaluates the ability of low-cost 3-D printers to be effective at reducing the economic costs of farming.This study limits the evaluation of open-source 3-D printers to only the most-developed fused filament fabrication of the bioplastic polylactic acid (PLA. PLA is a strong biodegradable and recyclable thermoplastic appropriate for a range of representative products, which are grouped into five categories of prints: handtools, food processing, animal management, water management and hydroponics. The advantages and shortcomings of applying 3-D printing to each technology are evaluated. The results show a general izabletechnical viability and economic benefit to adopting open-source 3-D printing for any of the technologies, although the individual economic impact is highly dependent on needs and frequency of use on a specific farm. Capital costs of a 3-D printer may be saved from on-farm printing of a single advanced analytical instrument in a day or replacing hundreds of inexpensive products over a year. In order for the full potential of open-source 3-D printing to be realized to assist organic farm economic resiliency and self-sufficiency, future work is outlined in five core areas: designs of 3-D printable objects, 3-D printing
OpenBAN: An Open Building ANalytics Middleware for Smart Buildings

Directory of Open Access Journals (Sweden)

Pandarasamy Arjunan

2016-03-01

Full Text Available Towards the realization of smart building applications, buildings are increasingly instrumented with diverse sensors and actuators. These sensors generate large volumes of data which can be analyzed for optimizing building operations. Many building energy management tasks such as energy forecasting, disaggregation, among others require complex analytics leveraging collected sensor data. While several standalone and cloud-based systems for archiving, sharing and visualizing sensor data have emerged, their support for analyzing sensor data streams is primitive and limited to rule-based actions based on thresholds and simple aggregation functions. We develop OpenBAN, an open source sensor data analytics middleware for buildings, to make analytics an integral component of modern smart building applications. OpenBAN provides a framework of extensible sensor data processing elements for identifying various building context, which different applications can leverage. We validate the capabilities of OpenBAN by developing three representative real-world applications which are deployed in our test-bed buildings: (i household energy disaggregation, (ii detection of sprinkler usage from water meter data, and (iii electricity demand forecasting. We also provide a preliminary system performance of OpenBAN when deployed in the cloud and locally.
OpenDOAR Policy tools and applications

CERN Document Server

CERN. Geneva; Van de Sompel, Herbert

2007-01-01

OpenDOAR conducted a survey of the world's repositories that showed 2/3 as having unusable or missing policies for content re-use and other issues. Such policies are essential for service providers to be able to develop innovative services that use the full potential of open access. OpenDOAR has developed a set of policy generator tools for repository administrators and is contacting administrators to advocate policy development. It is hoped that one outcome from this work will be some standardisation of policies in vocabulary and intent. Other developments include an OpenDOAR API. This presentation looks at the way that the tools and API have been developed and the implcations for their use.
OpenDOAR Policy tools and applications

CERN Multimedia

CERN. Geneva

2007-01-01

OpenDOAR conducted a survey of the world's repositories that showed 2/3 as having unusable or missing policies for content re-use and other issues. Such policies are essential for service providers to be able to develop innovative services that use the full potential of open access. OpenDOAR has developed a set of policy generator tools for repository administrators and is contacting administrators to advocate policy development. It is hoped that one outcome from this work will be some standardisation of policies in vocabulary and intent. Other developments include an OpenDOAR API. This presentation looks at the way that the tools and API have been developed and the implcations for their use. View Bill Hubbard's biography
Open Source Opens Opportunities for Army's Simulation System

National Research Council Canada - National Science Library

Parsons, Douglas J; Wittman, Jr, Robert L

2005-01-01

.... Postured as an open-architecture, open-source application, the OneSAF program will put this software into the hands of a vast number of developers throughout the Department of Defense with the intent...
Learning openCV computer vision with the openCV library

CERN Document Server

Bradski, Gary

2008-01-01

Learning OpenCV puts you right in the middle of the rapidly expanding field of computer vision. Written by the creators of OpenCV, the widely used free open-source library, this book introduces you to computer vision and demonstrates how you can quickly build applications that enable computers to see" and make decisions based on the data. With this book, any developer or hobbyist can get up and running with the framework quickly, whether it's to build simple or sophisticated vision applications
Modelling window opening behaviour in Danish dwellings

DEFF Research Database (Denmark)

Andersen, Rune Vinther; Olesen, Bjarne W.; Toftum, Jørn

2011-01-01

In this paper we present and analyse data from two studies of window opening behaviour in residential buildings in Denmark. Based on measurements of indoor environment, weather and window opening behaviour in 15 dwellings, we propose a model that will predict window opening behaviour. The data...... showed that other factors than thermal effects impact the behaviour of the occupants. Some of these factors were included in the model. We present data from repeated questionnaire surveys that show that occupants tend to adjust heating setpoints, adjust clothing and operate windows when feeling thermally...

The application of GPS to the deformation monitoring of side slope in open-pit uranium mines

International Nuclear Information System (INIS)

Zhu Yufeng; Pan Jiayong; Zhu Guogen; Wang Fei

2009-01-01

GPS has the characters,such as higher accuracy,not influenced by weather and day time. According to actual circumstance of a open pit uranium mine in China. This paper introduces a system to monit the deformation of side sloping and its detail application in a open pit mine. (authors)
Safety after extended repeated use of ulipristal acetate for uterine fibroids

DEFF Research Database (Denmark)

Fauser, Bart C J M; Donnez, Jacques; Bouchard, Philippe

2017-01-01

OBJECTIVE: To assess long term safety of extended repeated 3-month courses of ulipristal acetate (UPA) 10 mg/day, for up to 8 courses, with focus on endometrial and laboratory safety parameters. METHODS: This long-term, multi-center, open-label cohort, follow up study consisted of up to 8 consecu...
Effect of repeated application of 14C-carbaryl and of addition of glucose and cellulose to soil samples

International Nuclear Information System (INIS)

Hirata, R.; Luchini, L.C.; Mesquita, T.B.; Ruegg, E.F.

1984-01-01

The behaviour of the insecticide carbaryl is studied in samples of Gley Humic and Red-Yellow Latosol soil by means of radiometric techniques. In the Red-Yellow Latosol two carbon sources - glucose and cellulose - and a mixture of glucose plus cellulose were added. Repeated applications of carbaryl in both soils highly increased the rate of degradation, probably due to a rapid increase in the number of microorganisms by using the pesticide as substrate. (M.A.C.) [pt
A heterogeneous computing accelerated SCE-UA global optimization method using OpenMP, OpenCL, CUDA, and OpenACC.

Science.gov (United States)

Kan, Guangyuan; He, Xiaoyan; Ding, Liuqian; Li, Jiren; Liang, Ke; Hong, Yang

2017-10-01

The shuffled complex evolution optimization developed at the University of Arizona (SCE-UA) has been successfully applied in various kinds of scientific and engineering optimization applications, such as hydrological model parameter calibration, for many years. The algorithm possesses good global optimality, convergence stability and robustness. However, benchmark and real-world applications reveal the poor computational efficiency of the SCE-UA. This research aims at the parallelization and acceleration of the SCE-UA method based on powerful heterogeneous computing technology. The parallel SCE-UA is implemented on Intel Xeon multi-core CPU (by using OpenMP and OpenCL) and NVIDIA Tesla many-core GPU (by using OpenCL, CUDA, and OpenACC). The serial and parallel SCE-UA were tested based on the Griewank benchmark function. Comparison results indicate the parallel SCE-UA significantly improves computational efficiency compared to the original serial version. The OpenCL implementation obtains the best overall acceleration results however, with the most complex source code. The parallel SCE-UA has bright prospects to be applied in real-world applications.
Research on OpenStack of open source cloud computing in colleges and universities’ computer room

Science.gov (United States)

Wang, Lei; Zhang, Dandan

2017-06-01

In recent years, the cloud computing technology has a rapid development, especially open source cloud computing. Open source cloud computing has attracted a large number of user groups by the advantages of open source and low cost, have now become a large-scale promotion and application. In this paper, firstly we briefly introduced the main functions and architecture of the open source cloud computing OpenStack tools, and then discussed deeply the core problems of computer labs in colleges and universities. Combining with this research, it is not that the specific application and deployment of university computer rooms with OpenStack tool. The experimental results show that the application of OpenStack tool can efficiently and conveniently deploy cloud of university computer room, and its performance is stable and the functional value is good.
Repeated soil application of organic waste amendments reduces draught force and fuel consumption for soil tillage

DEFF Research Database (Denmark)

Peltrea, Clément; Nyord, Tavs; Bruun, Sander

2015-01-01

Abstract Soil application of organic waste products (OWP) can maintain or increase soil organic carbon (SOC) content, which in turn could lead to increased porosity and potentially to reduced energy use for soil tillage. Only a few studies have addressed the effect of SOC content on draught force...... for soil tillage, and this still needs to be addressed for fields that receive diverse types of organic waste of urban, agricultural and agro-industrial origin. The objective of this study was to determine the effect of changes in SOC induced by repeated soil application of OWP on draught force for soil...... tillage and tractor fuel consumption. Draught force was measured for tillage with conventional spring tillage tines, as well as bulk density, soil texture and SOC content in the CRUCIAL field experiment, Denmark in which diverse types of OWP had been applied annually for 11 years. The OWP included...
Open algebraic surfaces

CERN Document Server

Miyanishi, Masayoshi

2000-01-01

Open algebraic surfaces are a synonym for algebraic surfaces that are not necessarily complete. An open algebraic surface is understood as a Zariski open set of a projective algebraic surface. There is a long history of research on projective algebraic surfaces, and there exists a beautiful Enriques-Kodaira classification of such surfaces. The research accumulated by Ramanujan, Abhyankar, Moh, and Nagata and others has established a classification theory of open algebraic surfaces comparable to the Enriques-Kodaira theory. This research provides powerful methods to study the geometry and topology of open algebraic surfaces. The theory of open algebraic surfaces is applicable not only to algebraic geometry, but also to other fields, such as commutative algebra, invariant theory, and singularities. This book contains a comprehensive account of the theory of open algebraic surfaces, as well as several applications, in particular to the study of affine surfaces. Prerequisite to understanding the text is a basic b...
OpenShift Workshop

CERN Multimedia

CERN. Geneva; Rodriguez Peon, Alberto

2017-01-01

Workshop to introduce developers to the OpenShift platform available at CERN. Several use cases will be shown, including deploying an existing application into OpenShift. We expect attendees to realize about OpenShift features and general architecture of the service.
An Offline-Online Android Application for Hazard Event Mapping Using WebGIS Open Source Technologies

Science.gov (United States)

Olyazadeh, Roya; Jaboyedoff, Michel; Sudmeier-Rieux, Karen; Derron, Marc-Henri; Devkota, Sanjaya

2016-04-01

Nowadays, Free and Open Source Software (FOSS) plays an important role in better understanding and managing disaster risk reduction around the world. National and local government, NGOs and other stakeholders are increasingly seeking and producing data on hazards. Most of the hazard event inventories and land use mapping are based on remote sensing data, with little ground truthing, creating difficulties depending on the terrain and accessibility. Open Source WebGIS tools offer an opportunity for quicker and easier ground truthing of critical areas in order to analyse hazard patterns and triggering factors. This study presents a secure mobile-map application for hazard event mapping using Open Source WebGIS technologies such as Postgres database, Postgis, Leaflet, Cordova and Phonegap. The objectives of this prototype are: 1. An Offline-Online android mobile application with advanced Geospatial visualisation; 2. Easy Collection and storage of events information applied services; 3. Centralized data storage with accessibility by all the service (smartphone, standard web browser); 4. Improving data management by using active participation in hazard event mapping and storage. This application has been implemented as a low-cost, rapid and participatory method for recording impacts from hazard events and includes geolocation (GPS data and Internet), visualizing maps with overlay of satellite images, viewing uploaded images and events as cluster points, drawing and adding event information. The data can be recorded in offline (Android device) or online version (all browsers) and consequently uploaded through the server whenever internet is available. All the events and records can be visualized by an administrator and made public after approval. Different user levels can be defined to access the data for communicating the information. This application was tested for landslides in post-earthquake Nepal but can be used for any other type of hazards such as flood, avalanche
OpenSHMEM-UCX : Evaluation of UCX for implementing OpenSHMEM Programming Model

Energy Technology Data Exchange (ETDEWEB)

Baker, Matthew B [ORNL; Gorentla Venkata, Manjunath [ORNL; Aderholdt, William Ferrol [ORNL; Shamis, Pavel [ARM Research

2016-01-01

The OpenSHMEM reference implementation was developed towards the goal of developing an open source and high-performing Open- SHMEM implementation. To achieve portability and performance across various networks, the OpenSHMEM reference implementation uses GAS- Net and UCCS for network operations. Recently, new network layers have emerged with the promise of providing high-performance, scalabil- ity, and portability for HPC applications. In this paper, we implement the OpenSHMEM reference implementation to use the UCX framework for network operations. Then, we evaluate its performance and scalabil- ity on Cray XK systems to understand UCX s suitability for developing the OpenSHMEM programming model. Further, we develop a bench- mark called SHOMS for evaluating the OpenSHMEM implementation. Our experimental results show that OpenSHMEM-UCX outperforms the vendor supplied OpenSHMEM implementation in most cases on the Cray XK system by up to 40% with respect to message rate and up to 70% for the execution of application kernels.
P-Scan provides accuracy and repeatability in ultrasonics

International Nuclear Information System (INIS)

Keys, R.L.

1987-01-01

The P-Scan (Projection image scanning technique) is an automated ultrasonic inspection technique, developed to overcome the problems with accuracy and repeatability experienced with manual ultrasonic systems. The equipment and its applications are described. (author)
Non-Markovian linear response theory for quantum open systems and its applications.

Science.gov (United States)

Shen, H Z; Li, D X; Yi, X X

2017-01-01

The Kubo formula is an equation that expresses the linear response of an observable due to a time-dependent perturbation. It has been extended from closed systems to open systems in recent years under the Markovian approximation, but is barely explored for open systems in non-Markovian regimes. In this paper, we derive a formula for the linear response of an open system to a time-independent external field. This response formula is available for both Markovian and non-Markovian dynamics depending on parameters in the spectral density of the environment. As an illustration of the theory, the Hall conductance of a two-band system subjected to environments is derived and discussed. With the tight-binding model, we point out the Hall conductance changes from Markovian to non-Markovian dynamics by modulating the spectral density of the environment. Our results suggest a way to the controlling of the system response, which has potential applications for quantum statistical mechanics and condensed matter physics.
Applications of Open Source GMAW-Based Metal 3-D Printing

OpenAIRE

Yuenyong Nilsiam; Paul G. Sanders; Joshua M. Pearce

2018-01-01

The metal 3-D printing market is currently dominated by high-end applications, which make it inaccessible for small and medium enterprises, fab labs, and individual makers who are interested in the ability to prototype and additively manufacture final products in metal. Recent progress led to low-cost open-source metal 3-D printers using a gas metal arc welding (GMAW)-based print head. This reduced the cost of metal 3-D printers into the range of desktop prosumer polymer 3-D printers. Consequ...
ACCTuner: OpenACC Auto-Tuner For Accelerated Scientific Applications

KAUST Repository

Alzayer, Fatemah

2015-05-17

We optimize parameters in OpenACC clauses for a stencil evaluation kernel executed on Graphical Processing Units (GPUs) using a variety of machine learning and optimization search algorithms, individually and in hybrid combinations, and compare execution time performance to the best possible obtained from brute force search. Several auto-tuning techniques – historic learning, random walk, simulated annealing, Nelder-Mead, and genetic algorithms – are evaluated over a large two-dimensional parameter space not satisfactorily addressed to date by OpenACC compilers, consisting of gang size and vector length. A hybrid of historic learning and Nelder-Mead delivers the best balance of high performance and low tuning effort. GPUs are employed over an increasing range of applications due to the performance available from their large number of cores, as well as their energy efficiency. However, writing code that takes advantage of their massive fine-grained parallelism requires deep knowledge of the hardware, and is generally a complex task involving program transformation and the selection of many parameters. To improve programmer productivity, the directive-based programming model OpenACC was announced as an industry standard in 2011. Various compilers have been developed to support this model, the most notable being those by Cray, CAPS, and PGI. While the architecture and number of cores have evolved rapidly, the compilers have failed to keep up at configuring the parallel program to run most e ciently on the hardware. Following successful approaches to obtain high performance in kernels for cache-based processors using auto-tuning, we approach this compiler-hardware gap in GPUs by employing auto-tuning for the key parameters “gang” and “vector” in OpenACC clauses. We demonstrate results for a stencil evaluation kernel typical of seismic imaging over a variety of realistically sized three-dimensional grid configurations, with different truncation error orders
Nickel contact sensitivity in the guinea pig. An efficient open application test method

DEFF Research Database (Denmark)

Nielsen, G D; Rohold, A E; Andersen, Klaus Ejner

1992-01-01

Nickel contact sensitivity was successfully induced in guinea pigs using an open epicutaneous application method. Immediately after pretreatment with 1% aqueous sodium lauryl sulfate, upper back skin was treated daily for 4 weeks with 0.3%-3% nickel sulfate in either a 1% lanolin cream (Vaseline, p...
Open Data for Territorial Specialization Assessment Territorial Specialization in Attracting Local Development Funds: an Assessment. Procedure Based on Open Data and Open Tools

Directory of Open Access Journals (Sweden)

Giuseppe Las Casas

2014-05-01

Full Text Available The New Cohesion Policy opens to an integrated place-based approach for the improvement of territorial and social cohesion. The issue of territorial impact assessment of regional development policies highlight that data availability, open access to datasets in “near real-time”, participation, knowledge sharing, assumed importance within the development planning process. The contribution of ‘open data’ appears to be mature and in this paper we present an application of spatial analysis techniques for the evaluation of spatial effects of EU funds starting form open data by open-coesione. The application regards an internal areas of Basilicata Region: the Agri Valley. A complex contests in which an environmental and agricultural traditional vocation conflicts with a recent development of oil extraction industries. Conclusions regard further applications and perspectives for improving and supporting regional development planning considering the exploitation of open data sources and spatial analysis.
Repeat Rifaximin for Irritable Bowel Syndrome: No Clinically Significant Changes in Stool Microbial Antibiotic Sensitivity.

Science.gov (United States)

Pimentel, M; Cash, B D; Lembo, A; Wolf, R A; Israel, R J; Schoenfeld, P

2017-09-01

Rifaximin has demonstrated efficacy and safety for diarrhea-predominant irritable bowel syndrome (IBS-D). To determine the rifaximin repeat treatment effect on fecal bacterial antibiotic susceptibility. Patients with IBS in Trial 3 (TARGET 3) study who responded to open-label rifaximin 550 mg three times daily for 2 weeks, with symptom recurrence within 18 weeks, were randomized to double-blind treatment: two 2-week repeat courses of rifaximin or placebo, separated by 10 weeks. Prospective stool sample collection occurred before and after open-label rifaximin, before and after the first repeat course, and at the end of the study. Susceptibility testing was performed with 11 antibiotics, including rifaximin and rifampin, using broth microdilution or agar dilution methods. Of 103 patients receiving open-label rifaximin, 73 received double-blind rifaximin (n = 37) or placebo (n = 36). A total of 1429 bacterial and yeast isolates were identified, of which Bacteroidaceae (36.7%) and Enterobacteriaceae (33.9%) were the most common. In the double-blind phase, Clostridium difficile was highly susceptible to rifaximin [minimum inhibitory concentration (MIC) range 0.008-1 µg/mL] and rifampin (MIC range 0.004-0.25 µg/mL). Following double-blind rifaximin treatment, Staphylococcus isolates remained susceptible to rifaximin at all visits (MIC 50 range ≤0.06-32 µg/mL). Rifaximin exposure was not associated with long-term cross-resistance of Bacteroidaceae, Enterobacteriaceae, and Enterococcaceae to rifampin or nonrifamycin antibiotics tested. In this study, short-term repeat treatment with rifaximin has no apparent long-term effect on stool microbial susceptibility to rifaximin, rifampin, and nonrifamycin antibiotics. CLINICALTRIALS. NCT01543178.
GOC-TX: A Reliable Ticket Synchronization Application for the Open Science Grid

Science.gov (United States)

Hayashi, Soichi; Gopu, Arvind; Quick, Robert

2011-12-01

One of the major operational issues faced by large multi-institutional collaborations is permitting its users and support staff to use their native ticket tracking environment while also exchanging these tickets with collaborators. After several failed attempts at email-parser based ticket exchanges, the OSG Operations Group has designed a comprehensive ticket synchronizing application. The GOC-TX application uses web-service interfaces offered by various commercial, open source and other homegrown ticketing systems, to synchronize tickets between two or more of these systems. GOC-TX operates independently from any ticketing system. It can be triggered by one ticketing system via email, active messaging, or a web-services call to check for current sync-status, pull applicable recent updates since prior synchronizations to the source ticket, and apply the updates to a destination ticket. The currently deployed production version of GOC-TX is able to synchronize tickets between the Numara Footprints ticketing system used by the OSG and the following systems: European Grid Initiative's system Global Grid User Support (GGUS) and the Request Tracker (RT) system used by Brookhaven. Additional interfaces to the BMC Remedy system used by Fermilab, and to other instances of RT used by other OSG partners, are expected to be completed in summer 2010. A fully configurable open source version is expected to be made available by early autumn 2010. This paper will cover the structure of the GOC-TX application, its evolution, and the problems encountered by OSG Operations group with ticket exchange within the OSG Collaboration.
GOC-TX: A Reliable Ticket Synchronization Application for the Open Science Grid

International Nuclear Information System (INIS)

Hayashi, Soichi; Gopu, Arvind; Quick, Robert

2011-01-01

One of the major operational issues faced by large multi-institutional collaborations is permitting its users and support staff to use their native ticket tracking environment while also exchanging these tickets with collaborators. After several failed attempts at email-parser based ticket exchanges, the OSG Operations Group has designed a comprehensive ticket synchronizing application. The GOC-TX application uses web-service interfaces offered by various commercial, open source and other homegrown ticketing systems, to synchronize tickets between two or more of these systems. GOC-TX operates independently from any ticketing system. It can be triggered by one ticketing system via email, active messaging, or a web-services call to check for current sync-status, pull applicable recent updates since prior synchronizations to the source ticket, and apply the updates to a destination ticket. The currently deployed production version of GOC-TX is able to synchronize tickets between the Numara Footprints ticketing system used by the OSG and the following systems: European Grid Initiative's system Global Grid User Support (GGUS) and the Request Tracker (RT) system used by Brookhaven. Additional interfaces to the BMC Remedy system used by Fermilab, and to other instances of RT used by other OSG partners, are expected to be completed in summer 2010. A fully configurable open source version is expected to be made available by early autumn 2010. This paper will cover the structure of the GOC-TX application, its evolution, and the problems encountered by OSG Operations group with ticket exchange within the OSG Collaboration.
Construction and application of Red5 cluster based on OpenStack

Science.gov (United States)

Wang, Jiaqing; Song, Jianxin

2017-08-01

With the application and development of cloud computing technology in various fields, the resource utilization rate of the data center has been improved obviously, and the system based on cloud computing platform has also improved the expansibility and stability. In the traditional way, Red5 cluster resource utilization is low and the system stability is poor. This paper uses cloud computing to efficiently calculate the resource allocation ability, and builds a Red5 server cluster based on OpenStack. Multimedia applications can be published to the Red5 cloud server cluster. The system achieves the flexible construction of computing resources, but also greatly improves the stability of the cluster and service efficiency.

Robustness of behavioral equivalence on open terms

NARCIS (Netherlands)

Mosses, P.D.; Mousavi, M.R.; Reniers, M.A.

2010-01-01

Sound behavioral equations on open terms may become unsound after conservative extensions of the underlying operational semantics. Providing criteria under which such equations are preserved is extremely useful; in particular, it can avoid the need to repeat proofs when extending the specified
40 CFR 424.10 - Applicability; description of the open electric furnaces with wet air pollution control devices...

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 28 2010-07-01 2010-07-01 true Applicability; description of the open electric furnaces with wet air pollution control devices subcategory. 424.10 Section 424.10 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS FERROALLOY MANUFACTURING POINT SOURCE CATEGORY Open...
Open Platform for Limit Protection with Carefree Maneuver Applications

Science.gov (United States)

Jeram, Geoffrey J.

2004-01-01

This Open Platform for Limit Protection guides the open design of maneuver limit protection systems in general, and manned, rotorcraft, aerospace applications in particular. The platform uses three stages of limit protection modules: limit cue creation, limit cue arbitration, and control system interface. A common set of limit cue modules provides commands that can include constraints, alerts, transfer functions, and friction. An arbitration module selects the "best" limit protection cues and distributes them to the most appropriate control path interface. This platform adopts a holistic approach to limit protection whereby it considers all potential interface points, including the pilot's visual, aural, and tactile displays; and automatic command restraint shaping for autonomous limit protection. For each functional module, this thesis guides the control system designer through the design choices and information interfaces among the modules. Limit cue module design choices include type of prediction, prediction mechanism, method of critical control calculation, and type of limit cue. Special consideration is given to the nature of the limit, particularly the level of knowledge about it, and the ramifications for limit protection design, especially with respect to intelligent control methods such as fuzzy inference systems and neural networks.
Towards the Application of Open Source Software in Developing National Electronic Health Record-Narrative Review Article.

Science.gov (United States)

Aminpour, Farzaneh; Sadoughi, Farahnaz; Ahmadi, Maryam

2013-12-01

Electronic Health Record (EHR) is a repository of patient health information shared among multiple authorized users. As a modern method of storing and processing health information, it is a solution for improving quality, safety and efficiency of patient care and health system. However, establishment of EHR requires a significant investment of time and money. While many of healthcare providers have very limited capital, application of open source software would be considered as a solution in developing national electronic health record especially in countries with low income. The evidence showed that financial limitation is one of the obstacles to implement electronic health records in developing countries. Therefore, establishment of an open source EHR system capable of modifications according to the national requirements seems to be inevitable in Iran. The present study identifies the impact of application of open source software in developing national electronic health record in Iran.
ERSN-OpenMC, a Java-based GUI for OpenMC Monte Carlo code

Directory of Open Access Journals (Sweden)

Jaafar EL Bakkali

2016-07-01

Full Text Available OpenMC is a new Monte Carlo transport particle simulation code focused on solving two types of neutronic problems mainly the k-eigenvalue criticality fission source problems and external fixed fission source problems. OpenMC does not have any Graphical User Interface and the creation of one is provided by our java-based application named ERSN-OpenMC. The main feature of this application is to provide to the users an easy-to-use and flexible graphical interface to build better and faster simulations, with less effort and great reliability. Additionally, this graphical tool was developed with several features, as the ability to automate the building process of OpenMC code and related libraries as well as the users are given the freedom to customize their installation of this Monte Carlo code. A full description of the ERSN-OpenMC application is presented in this paper.
Adopting Open-Source Software Applications in U. S. Higher Education: A Cross-Disciplinary Review of the Literature

Science.gov (United States)

van Rooij, Shahron Williams

2009-01-01

Higher Education institutions in the United States are considering Open Source software applications such as the Moodle and Sakai course management systems and the Kuali financial system to build integrated learning environments that serve both academic and administrative needs. Open Source is presumed to be more flexible and less costly than…
Two-dimensional quantum repeaters

Science.gov (United States)

Wallnöfer, J.; Zwerger, M.; Muschik, C.; Sangouard, N.; Dür, W.

2016-11-01

The endeavor to develop quantum networks gave rise to a rapidly developing field with far-reaching applications such as secure communication and the realization of distributed computing tasks. This ultimately calls for the creation of flexible multiuser structures that allow for quantum communication between arbitrary pairs of parties in the network and facilitate also multiuser applications. To address this challenge, we propose a two-dimensional quantum repeater architecture to establish long-distance entanglement shared between multiple communication partners in the presence of channel noise and imperfect local control operations. The scheme is based on the creation of self-similar multiqubit entanglement structures at growing scale, where variants of entanglement swapping and multiparty entanglement purification are combined to create high-fidelity entangled states. We show how such networks can be implemented using trapped ions in cavities.
Free and open-source automated 3-D microscope.

Science.gov (United States)

Wijnen, Bas; Petersen, Emily E; Hunt, Emily J; Pearce, Joshua M

2016-11-01

Open-source technology not only has facilitated the expansion of the greater research community, but by lowering costs it has encouraged innovation and customizable design. The field of automated microscopy has continued to be a challenge in accessibility due the expense and inflexible, noninterchangeable stages. This paper presents a low-cost, open-source microscope 3-D stage. A RepRap 3-D printer was converted to an optical microscope equipped with a customized, 3-D printed holder for a USB microscope. Precision measurements were determined to have an average error of 10 μm at the maximum speed and 27 μm at the minimum recorded speed. Accuracy tests yielded an error of 0.15%. The machine is a true 3-D stage and thus able to operate with USB microscopes or conventional desktop microscopes. It is larger than all commercial alternatives, and is thus capable of high-depth images over unprecedented areas and complex geometries. The repeatability is below 2-D microscope stages, but testing shows that it is adequate for the majority of scientific applications. The open-source microscope stage costs less than 3-9% of the closest proprietary commercial stages. This extreme affordability vastly improves accessibility for 3-D microscopy throughout the world. © 2016 The Authors Journal of Microscopy © 2016 Royal Microscopical Society.
A collection of open source applications for mass spectrometry data mining.

Science.gov (United States)

Gallardo, Óscar; Ovelleiro, David; Gay, Marina; Carrascal, Montserrat; Abian, Joaquin

2014-10-01

We present several bioinformatics applications for the identification and quantification of phosphoproteome components by MS. These applications include a front-end graphical user interface that combines several Thermo RAW formats to MASCOT™ Generic Format extractors (EasierMgf), two graphical user interfaces for search engines OMSSA and SEQUEST (OmssaGui and SequestGui), and three applications, one for the management of databases in FASTA format (FastaTools), another for the integration of search results from up to three search engines (Integrator), and another one for the visualization of mass spectra and their corresponding database search results (JsonVisor). These applications were developed to solve some of the common problems found in proteomic and phosphoproteomic data analysis and were integrated in the workflow for data processing and feeding on our LymPHOS database. Applications were designed modularly and can be used standalone. These tools are written in Perl and Python programming languages and are supported on Windows platforms. They are all released under an Open Source Software license and can be freely downloaded from our software repository hosted at GoogleCode. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.
IQM: an extensible and portable open source application for image and signal analysis in Java.

Science.gov (United States)

Kainz, Philipp; Mayrhofer-Reinhartshuber, Michael; Ahammer, Helmut

2015-01-01

Image and signal analysis applications are substantial in scientific research. Both open source and commercial packages provide a wide range of functions for image and signal analysis, which are sometimes supported very well by the communities in the corresponding fields. Commercial software packages have the major drawback of being expensive and having undisclosed source code, which hampers extending the functionality if there is no plugin interface or similar option available. However, both variants cannot cover all possible use cases and sometimes custom developments are unavoidable, requiring open source applications. In this paper we describe IQM, a completely free, portable and open source (GNU GPLv3) image and signal analysis application written in pure Java. IQM does not depend on any natively installed libraries and is therefore runnable out-of-the-box. Currently, a continuously growing repertoire of 50 image and 16 signal analysis algorithms is provided. The modular functional architecture based on the three-tier model is described along the most important functionality. Extensibility is achieved using operator plugins, and the development of more complex workflows is provided by a Groovy script interface to the JVM. We demonstrate IQM's image and signal processing capabilities in a proof-of-principle analysis and provide example implementations to illustrate the plugin framework and the scripting interface. IQM integrates with the popular ImageJ image processing software and is aiming at complementing functionality rather than competing with existing open source software. Machine learning can be integrated into more complex algorithms via the WEKA software package as well, enabling the development of transparent and robust methods for image and signal analysis.
Automatic Nephelometer of an Open Type for science atmosphere researches and Practical Applications

International Nuclear Information System (INIS)

Razenkov, I. A.; Rostov, A. P.; Park, W. K.; Burkov, V. V.

1997-01-01

Intellectual nephelometer of open type designed by the authors for in situ studies of the atmosphere are described. The nephlometer operate in near IR wavelength range. The construction and concept of the devices allow them either to work independently during several hours or to be operated remotely at a distance up to 500 m from the central host computer. The results and their analysis of two weeks test at Kumkang Hu-Tech Co. are represented. This Nephelometer is a new class of intellectual instruments intended for long-term application on open air and allowing to receive qualitative and the quantitative information about a scattering coefficient in situ.
General response formula and application to topological insulator in quantum open system.

Science.gov (United States)

Shen, H Z; Qin, M; Shao, X Q; Yi, X X

2015-11-01

It is well-known that the quantum linear response theory is based on the first-order perturbation theory for a system in thermal equilibrium. Hence, this theory breaks down when the system is in a steady state far from thermal equilibrium and the response up to higher order in perturbation is not negligible. In this paper, we develop a nonlinear response theory for such quantum open system. We first formulate this theory in terms of general susceptibility, after which we apply it to the derivation of Hall conductance for open system at finite temperature. As an example, the Hall conductance of the two-band model is derived. Then we calculate the Hall conductance for a two-dimensional ferromagnetic electron gas and a two-dimensional lattice model. The calculations show that the transition points of topological phase are robust against the environment. Our results provide a promising platform for the coherent manipulation of the nonlinear response in quantum open system, which has potential applications for quantum information processing and statistical physics.
Open Babel: An open chemical toolbox

Directory of Open Access Journals (Sweden)

O'Boyle Noel M

2011-10-01

Full Text Available Abstract Background A frequent problem in computational modeling is the interconversion of chemical structures between different formats. While standard interchange formats exist (for example, Chemical Markup Language and de facto standards have arisen (for example, SMILES format, the need to interconvert formats is a continuing problem due to the multitude of different application areas for chemistry data, differences in the data stored by different formats (0D versus 3D, for example, and competition between software along with a lack of vendor-neutral formats. Results We discuss, for the first time, Open Babel, an open-source chemical toolbox that speaks the many languages of chemical data. Open Babel version 2.3 interconverts over 110 formats. The need to represent such a wide variety of chemical and molecular data requires a library that implements a wide range of cheminformatics algorithms, from partial charge assignment and aromaticity detection, to bond order perception and canonicalization. We detail the implementation of Open Babel, describe key advances in the 2.3 release, and outline a variety of uses both in terms of software products and scientific research, including applications far beyond simple format interconversion. Conclusions Open Babel presents a solution to the proliferation of multiple chemical file formats. In addition, it provides a variety of useful utilities from conformer searching and 2D depiction, to filtering, batch conversion, and substructure and similarity searching. For developers, it can be used as a programming library to handle chemical data in areas such as organic chemistry, drug design, materials science, and computational chemistry. It is freely available under an open-source license from http://openbabel.org.
Open Babel: An open chemical toolbox

Science.gov (United States)

2011-01-01

Background A frequent problem in computational modeling is the interconversion of chemical structures between different formats. While standard interchange formats exist (for example, Chemical Markup Language) and de facto standards have arisen (for example, SMILES format), the need to interconvert formats is a continuing problem due to the multitude of different application areas for chemistry data, differences in the data stored by different formats (0D versus 3D, for example), and competition between software along with a lack of vendor-neutral formats. Results We discuss, for the first time, Open Babel, an open-source chemical toolbox that speaks the many languages of chemical data. Open Babel version 2.3 interconverts over 110 formats. The need to represent such a wide variety of chemical and molecular data requires a library that implements a wide range of cheminformatics algorithms, from partial charge assignment and aromaticity detection, to bond order perception and canonicalization. We detail the implementation of Open Babel, describe key advances in the 2.3 release, and outline a variety of uses both in terms of software products and scientific research, including applications far beyond simple format interconversion. Conclusions Open Babel presents a solution to the proliferation of multiple chemical file formats. In addition, it provides a variety of useful utilities from conformer searching and 2D depiction, to filtering, batch conversion, and substructure and similarity searching. For developers, it can be used as a programming library to handle chemical data in areas such as organic chemistry, drug design, materials science, and computational chemistry. It is freely available under an open-source license from http://openbabel.org. PMID:21982300
Tank Information System (tis): a Case Study in Migrating Web Mapping Application from Flex to Dojo for Arcgis Server and then to Open Source

Science.gov (United States)

Pulsani, B. R.

2017-11-01

Tank Information System is a web application which provides comprehensive information about minor irrigation tanks of Telangana State. As part of the program, a web mapping application using Flex and ArcGIS server was developed to make the data available to the public. In course of time as Flex be-came outdated, a migration of the client interface to the latest JavaScript based technologies was carried out. Initially, the Flex based application was migrated to ArcGIS JavaScript API using Dojo Toolkit. Both the client applications used published services from ArcGIS server. To check the migration pattern from proprietary to open source, the JavaScript based ArcGIS application was later migrated to OpenLayers and Dojo Toolkit which used published service from GeoServer. The migration pattern noticed in the study especially emphasizes upon the use of Dojo Toolkit and PostgreSQL database for ArcGIS server so that migration to open source could be performed effortlessly. The current ap-plication provides a case in study which could assist organizations in migrating their proprietary based ArcGIS web applications to open source. Furthermore, the study reveals cost benefits of adopting open source against commercial software's.
Common characteristics of open source software development and applicability for drug discovery: a systematic review.

Science.gov (United States)

Ardal, Christine; Alstadsæter, Annette; Røttingen, John-Arne

2011-09-28

Innovation through an open source model has proven to be successful for software development. This success has led many to speculate if open source can be applied to other industries with similar success. We attempt to provide an understanding of open source software development characteristics for researchers, business leaders and government officials who may be interested in utilizing open source innovation in other contexts and with an emphasis on drug discovery. A systematic review was performed by searching relevant, multidisciplinary databases to extract empirical research regarding the common characteristics and barriers of initiating and maintaining an open source software development project. Common characteristics to open source software development pertinent to open source drug discovery were extracted. The characteristics were then grouped into the areas of participant attraction, management of volunteers, control mechanisms, legal framework and physical constraints. Lastly, their applicability to drug discovery was examined. We believe that the open source model is viable for drug discovery, although it is unlikely that it will exactly follow the form used in software development. Hybrids will likely develop that suit the unique characteristics of drug discovery. We suggest potential motivations for organizations to join an open source drug discovery project. We also examine specific differences between software and medicines, specifically how the need for laboratories and physical goods will impact the model as well as the effect of patents.
Teaching web application development: Microsoft proprietary or open systems?

Directory of Open Access Journals (Sweden)

Stephen Corich

Full Text Available This paper revisits the debate concerning which development environment should be used to teach server-side Web Application Development courses to undergraduate students. In 2002, following an industry-based survey of Web developers, a decision was made to adopt an open source platform consisting of PHP and MySQL rather than a Microsoft platform utilising Access and Active Server Pages. Since that date there have been a number of significant changes within the computing industry that suggest that perhaps it is appropriate to revisit the original decision. This paper investigates expert opinion by reviewing current literature regarding web development environments, it looks at the results of a survey of web development companies and it examines the current employment trends in the web development area. The paper concludes by examining the impact of making a decision to change the development environment used to teach Web Application Development to a third year computing degree class and describes the impact on course delivery that the change has brought about.
OpenFlow cookbook

CERN Document Server

Smiler S, Kingston

2015-01-01

This book is intended for network protocol developers, SDN controller application developers, and academics who would like to understand and develop their own OpenFlow switch or OpenFlow controller in any programming language. With basic understanding of OpenFlow and its components, you will be able to follow the recipes in this book.
Nano-TiO₂--feasibility and challenges for human health risk assessment based on open literature.

Science.gov (United States)

Christensen, Frans M; Johnston, Helinor J; Stone, Vicki; Aitken, Robert J; Hankin, Steve; Peters, Sheona; Aschberger, Karin

2011-06-01

This study aims at investigating feasibility and challenges associated with conducting a human health risk assessment for nano-titanium-dioxide (nano-TiO₂) based on the open literature by following an approach similar to a classical regulatory risk assessment. Gaps in the available data set, both in relation to exposures and hazard, do not allow reaching any definite conclusions that could be used for regulatory decision-making. Results show that repeated inhalation in the workplace and possibly consumer inhalation may cause risks. Also short-term inhalation following spray applications may cause risks. Main future work should focus on generating occupational and consumer inhalation exposure data, as well as toxicity data on absorption following inhalation, repeated dermal contact, and contact with damaged skin. Also relevant seems further information on possible neurotoxicity and genotoxicity/carcinogenicity, as well as establishing a No Observed Adverse Effect Level (NOAEL) for acute inhalation of nano-TiO₂.
Cancer Prevention Fellowship Program Application Period is Open until August 25 | Division of Cancer Prevention

Science.gov (United States)

The application period for the NCI Cancer Prevention Fellowship Program (CPFP) is open. Since 1987, CPFP has provided funding support for post-doctoral Fellows to train the next generation of researchers and leaders in the field. |

Unitarity, Feedback, Interactions - Dynamics Emergent from Repeated Measurements

Science.gov (United States)

Corona Ugalde, Paulina; Altamirano, Natacha; Mann, Robert; Zych, Magdalena

Modern measurement theory dispenses with the description of a measurement as a projection. Rather, the measurement is understood as an operation, whereby the system's final state is determined by an action of a completely positive trace non-increasing map and the outcomes are described by linear operators on the system, distributed according to a positive-operator valued measure (POVM). The POVM approach unifies the theory of measurements with a general description of dynamics, the theory of open quantum systems. Engineering a particular measurement and engineering a particular dynamics for the system are thus two complementary aspects of the same conceptual framework. This correspondence is directly applied in quantum simulations and quantum control theory . With this motivation, we study what types of dynamics can emerge from a model of repeated short interactions of a system with a set of ancillae. We show that contingent on the model parameters the resulting dynamics ranges from exact unitarity to arbitrary fast decoherence. For a series of measurements the effective dynamics includes feedback-control, which for a composite system yields effective interactions between the subsystems. We quantify the amount of decoherence accompanying such induced interactions. The simple framework used in the present study can find applications in devising novel quantum control protocols, or quantum simulations.
An Open-Structure Treadmill Gait Trainer: From Research to Application.

Science.gov (United States)

Li, Jian; Chen, Diansheng; Fan, Yubo

2017-01-01

Lower limb rehabilitation robots are designed to enhance gait function in individuals with motor impairments. Although numerous rehabilitation robots have been developed, only few of these robots have been used in practical health care, particularly in China. The objective of this study is to construct a lower limb rehabilitation robot and bridge the gap between research and application. Open structure to facilitate practical application was created for the whole robot. Three typical movement patterns of a single leg were adopted in designing the exoskeletons, and force models for patient training were established and analyzed under three different conditions, respectively, and then a control system and security strategy were introduced. After establishing the robot, a preliminary experiment on the actual use of a prototype by patients was conducted to validate the functionality of the robot. The experiment showed that different patients and stages displayed different performances, and results on the trend variations across patients and across stages confirmed the validity of the robot and suggested that the design may lead to a system that could be successful in the treatment of patients with walking disorders in China. Furthermore, this study could provide a reference for a similar application design.
OpenCL Performance Evaluation on Modern Multicore CPUs

Directory of Open Access Journals (Sweden)

Joo Hwan Lee

2015-01-01

Full Text Available Utilizing heterogeneous platforms for computation has become a general trend, making the portability issue important. OpenCL (Open Computing Language serves this purpose by enabling portable execution on heterogeneous architectures. However, unpredictable performance variation on different platforms has become a burden for programmers who write OpenCL applications. This is especially true for conventional multicore CPUs, since the performance of general OpenCL applications on CPUs lags behind the performance of their counterparts written in the conventional parallel programming model for CPUs. In this paper, we evaluate the performance of OpenCL applications on out-of-order multicore CPUs from the architectural perspective. We evaluate OpenCL applications on various aspects, including API overhead, scheduling overhead, instruction-level parallelism, address space, data location, data locality, and vectorization, comparing OpenCL to conventional parallel programming models for CPUs. Our evaluation indicates unique performance characteristics of OpenCL applications and also provides insight into the optimization metrics for better performance on CPUs.
TANK INFORMATION SYSTEM (TIS: A CASE STUDY IN MIGRATING WEB MAPPING APPLICATION FROM FLEX TO DOJO FOR ARCGIS SERVER AND THEN TO OPEN SOURCE

Directory of Open Access Journals (Sweden)

B. R. Pulsani

2017-11-01

Full Text Available Tank Information System is a web application which provides comprehensive information about minor irrigation tanks of Telangana State. As part of the program, a web mapping application using Flex and ArcGIS server was developed to make the data available to the public. In course of time as Flex be-came outdated, a migration of the client interface to the latest JavaScript based technologies was carried out. Initially, the Flex based application was migrated to ArcGIS JavaScript API using Dojo Toolkit. Both the client applications used published services from ArcGIS server. To check the migration pattern from proprietary to open source, the JavaScript based ArcGIS application was later migrated to OpenLayers and Dojo Toolkit which used published service from GeoServer. The migration pattern noticed in the study especially emphasizes upon the use of Dojo Toolkit and PostgreSQL database for ArcGIS server so that migration to open source could be performed effortlessly. The current ap-plication provides a case in study which could assist organizations in migrating their proprietary based ArcGIS web applications to open source. Furthermore, the study reveals cost benefits of adopting open source against commercial software's.
Three-phase multilevel inverter configuration for open-winding high power application

DEFF Research Database (Denmark)

Sanjeevikumar, Padmanaban; Blaabjerg, Frede; Wheeler, Patrick William

2015-01-01

This paper work exploits a new dual open-winding three-phase multilevel inverter configuration suitable for high power medium-voltage applications. Modular structure comprised of standard three-phase voltage source inverter (VSI) along with one additional bi-directional semiconductor device (MOSFET...... for implementation purpose. Proposed dual-inverter configuration generates multilevel outputs with benefit includes reduced THD and dv/dt in comparison to other dual-inverter topologies. Complete model of the multilevel ac drive is developed with simple MSCFM modulation in Matlab/PLECs numerical software...
Impact of heavy repeated long term pesticide applications on soil properties in a cotton agroecosystem

International Nuclear Information System (INIS)

Hussain, Altaf; Asi, Muhammad Rafique; Iqbal, Zafar; Chaudhry, Jamil Anwar

2001-01-01

A study was conducted under field conditions to investigate the effects of heavy repeated long term pesticide applications, at their recommended doses, on some biological properties in relation to the cotton agroecosystem at NIAB, Faisalabad, Pakistan. Control, test and treated soils before (BPA) and after pesticide applications (APA) were collected and analyzed at different stages of pesticide applications. The selective tests were measurements of microbial numbers, basal as well as substrate-induced respiration, nitrification, Fe-III reduction and the activities, of dehydrogenase and arginine deaminase. Endosulfan, profenophos + alphamethrin and methamidophos inhibited while monocrotophos and bifenthrin + acetamiprid enhanced the bacterial population numbers. The fungal population was depressed with endosulfan while monocrotophos, profenophos and methamidophos stimulated it. All other applied pesticides did not cause any appreciable change in total bacterial and fungal populations throughout the study period. Monocrotophos, propargite, endosulfan alone or with dimethoate and profenophos with cypermethrin or with ethion inhibited the respiration and hence affected the biomass. All other pesticides had no effect in test and treated soils compared to control soil. No pronounced inhibition or stimulation was seen in respiration after several weeks following the applications of pesticide. Endosulfan, endosulfan with dimethoate, methamidophos stimulated while profenophos + cypermethrin and bifenthrin + endosulfan inhibited the nitrification. All other pesticide applications showed similar nitrification rates in test and treated soils compared to control soil. Iron reduction capacity was stimulated by dimethoate + endosulfan and propenophos + cypermethrin and profenphos, methamidophos, propargite and diafenthiuron + profenophos reduced it. Soil dehydrogenase activity was inhibited by methamidophos, fenpropathrin, endosulfan + dimethoate and bifenthrin + ethion
Optimization of sequence alignment for simple sequence repeat regions

Directory of Open Access Journals (Sweden)

Ogbonnaya Francis C

2011-07-01

Full Text Available Abstract Background Microsatellites, or simple sequence repeats (SSRs, are tandemly repeated DNA sequences, including tandem copies of specific sequences no longer than six bases, that are distributed in the genome. SSR has been used as a molecular marker because it is easy to detect and is used in a range of applications, including genetic diversity, genome mapping, and marker assisted selection. It is also very mutable because of slipping in the DNA polymerase during DNA replication. This unique mutation increases the insertion/deletion (INDELs mutation frequency to a high ratio - more than other types of molecular markers such as single nucleotide polymorphism (SNPs. SNPs are more frequent than INDELs. Therefore, all designed algorithms for sequence alignment fit the vast majority of the genomic sequence without considering microsatellite regions, as unique sequences that require special consideration. The old algorithm is limited in its application because there are many overlaps between different repeat units which result in false evolutionary relationships. Findings To overcome the limitation of the aligning algorithm when dealing with SSR loci, a new algorithm was developed using PERL script with a Tk graphical interface. This program is based on aligning sequences after determining the repeated units first, and the last SSR nucleotides positions. This results in a shifting process according to the inserted repeated unit type. When studying the phylogenic relations before and after applying the new algorithm, many differences in the trees were obtained by increasing the SSR length and complexity. However, less distance between different linage had been observed after applying the new algorithm. Conclusions The new algorithm produces better estimates for aligning SSR loci because it reflects more reliable evolutionary relations between different linages. It reduces overlapping during SSR alignment, which results in a more realistic
Tandem repeat regions within the Burkholderia pseudomallei genome and their application for high resolution genotyping

Directory of Open Access Journals (Sweden)

Harvey Steven P

2007-03-01

Full Text Available Abstract Background The facultative, intracellular bacterium Burkholderia pseudomallei is the causative agent of melioidosis, a serious infectious disease of humans and animals. We identified and categorized tandem repeat arrays and their distribution throughout the genome of B. pseudomallei strain K96243 in order to develop a genetic typing method for B. pseudomallei. We then screened 104 of the potentially polymorphic loci across a diverse panel of 31 isolates including B. pseudomallei, B. mallei and B. thailandensis in order to identify loci with varying degrees of polymorphism. A subset of these tandem repeat arrays were subsequently developed into a multiple-locus VNTR analysis to examine 66 B. pseudomallei and 21 B. mallei isolates from around the world, as well as 95 lineages from a serial transfer experiment encompassing ~18,000 generations. Results B. pseudomallei contains a preponderance of tandem repeat loci throughout its genome, many of which are duplicated elsewhere in the genome. The majority of these loci are composed of repeat motif lengths of 6 to 9 bp with 4 to 10 repeat units and are predominately located in intergenic regions of the genome. Across geographically diverse B. pseudomallei and B.mallei isolates, the 32 VNTR loci displayed between 7 and 28 alleles, with Nei's diversity values ranging from 0.47 and 0.94. Mutation rates for these loci are comparable (>10-5 per locus per generation to that of the most diverse tandemly repeated regions found in other less diverse bacteria. Conclusion The frequency, location and duplicate nature of tandemly repeated regions within the B. pseudomallei genome indicate that these tandem repeat regions may play a role in generating and maintaining adaptive genomic variation. Multiple-locus VNTR analysis revealed extensive diversity within the global isolate set containing B. pseudomallei and B. mallei, and it detected genotypic differences within clonal lineages of both species that were
HTSstation: a web application and open-access libraries for high-throughput sequencing data analysis.

Science.gov (United States)

David, Fabrice P A; Delafontaine, Julien; Carat, Solenne; Ross, Frederick J; Lefebvre, Gregory; Jarosz, Yohan; Sinclair, Lucas; Noordermeer, Daan; Rougemont, Jacques; Leleu, Marion

2014-01-01

The HTSstation analysis portal is a suite of simple web forms coupled to modular analysis pipelines for various applications of High-Throughput Sequencing including ChIP-seq, RNA-seq, 4C-seq and re-sequencing. HTSstation offers biologists the possibility to rapidly investigate their HTS data using an intuitive web application with heuristically pre-defined parameters. A number of open-source software components have been implemented and can be used to build, configure and run HTS analysis pipelines reactively. Besides, our programming framework empowers developers with the possibility to design their own workflows and integrate additional third-party software. The HTSstation web application is accessible at http://htsstation.epfl.ch.
Repeat Gamma Knife Radiosurgery for Trigeminal Neuralgia

International Nuclear Information System (INIS)

Aubuchon, Adam C.; Chan, Michael D.; Lovato, James F.; Balamucki, Christopher J.; Ellis, Thomas L.; Tatter, Stephen B.; McMullen, Kevin P.; Munley, Michael T.; Deguzman, Allan F.; Ekstrand, Kenneth E.; Bourland, J. Daniel; Shaw, Edward G.

2011-01-01

Purpose: Repeat gamma knife stereotactic radiosurgery (GKRS) for recurrent or persistent trigeminal neuralgia induces an additional response but at the expense of an increased incidence of facial numbness. The present series summarized the results of a repeat treatment series at Wake Forest University Baptist Medical Center, including a multivariate analysis of the data to identify the prognostic factors for treatment success and toxicity. Methods and Materials: Between January 1999 and December 2007, 37 patients underwent a second GKRS application because of treatment failure after a first GKRS treatment. The mean initial dose in the series was 87.3 Gy (range, 80–90). The mean retreatment dose was 84.4 Gy (range, 60–90). The dosimetric variables recorded included the dorsal root entry zone dose, pons surface dose, and dose to the distal nerve. Results: Of the 37 patients, 81% achieved a >50% pain relief response to repeat GKRS, and 57% experienced some form of trigeminal dysfunction after repeat GKRS. Two patients (5%) experienced clinically significant toxicity: one with bothersome numbness and one with corneal dryness requiring tarsorraphy. A dorsal root entry zone dose at repeat treatment of >26.6 Gy predicted for treatment success (61% vs. 32%, p = .0716). A cumulative dorsal root entry zone dose of >84.3 Gy (72% vs. 44%, p = .091) and a cumulative pons surface dose of >108.5 Gy (78% vs. 44%, p = .018) predicted for post-GKRS numbness. The presence of any post-GKRS numbness predicted for a >50% decrease in pain intensity (100% vs. 60%, p = .0015). Conclusion: Repeat GKRS is a viable treatment option for recurrent trigeminal neuralgia, although the patient assumes a greater risk of nerve dysfunction to achieve maximal pain relief.
Repeat Gamma Knife Radiosurgery for Trigeminal Neuralgia

Energy Technology Data Exchange (ETDEWEB)

Aubuchon, Adam C., E-mail: acaubuchon@gmail.com [Department of Radiation Oncology, Wake Forest University School of Medicine, Winston-Salem, NC (United States); Chan, Michael D. [Department of Radiation Oncology, Wake Forest University School of Medicine, Winston-Salem, NC (United States); Lovato, James F. [Department of Public Health Sciences, Wake Forest University School of Medicine, Winston-Salem, NC (United States); Balamucki, Christopher J. [Department of Radiation Oncology, University of Florida, Gainesville, FL (United States); Ellis, Thomas L.; Tatter, Stephen B. [Department of Neurosurgery, Wake Forest University School of Medicine, Winston-Salem, NC (United States); McMullen, Kevin P.; Munley, Michael T.; Deguzman, Allan F.; Ekstrand, Kenneth E.; Bourland, J. Daniel; Shaw, Edward G. [Department of Radiation Oncology, Wake Forest University School of Medicine, Winston-Salem, NC (United States)

2011-11-15

Purpose: Repeat gamma knife stereotactic radiosurgery (GKRS) for recurrent or persistent trigeminal neuralgia induces an additional response but at the expense of an increased incidence of facial numbness. The present series summarized the results of a repeat treatment series at Wake Forest University Baptist Medical Center, including a multivariate analysis of the data to identify the prognostic factors for treatment success and toxicity. Methods and Materials: Between January 1999 and December 2007, 37 patients underwent a second GKRS application because of treatment failure after a first GKRS treatment. The mean initial dose in the series was 87.3 Gy (range, 80-90). The mean retreatment dose was 84.4 Gy (range, 60-90). The dosimetric variables recorded included the dorsal root entry zone dose, pons surface dose, and dose to the distal nerve. Results: Of the 37 patients, 81% achieved a >50% pain relief response to repeat GKRS, and 57% experienced some form of trigeminal dysfunction after repeat GKRS. Two patients (5%) experienced clinically significant toxicity: one with bothersome numbness and one with corneal dryness requiring tarsorraphy. A dorsal root entry zone dose at repeat treatment of >26.6 Gy predicted for treatment success (61% vs. 32%, p = .0716). A cumulative dorsal root entry zone dose of >84.3 Gy (72% vs. 44%, p = .091) and a cumulative pons surface dose of >108.5 Gy (78% vs. 44%, p = .018) predicted for post-GKRS numbness. The presence of any post-GKRS numbness predicted for a >50% decrease in pain intensity (100% vs. 60%, p = .0015). Conclusion: Repeat GKRS is a viable treatment option for recurrent trigeminal neuralgia, although the patient assumes a greater risk of nerve dysfunction to achieve maximal pain relief.
An interactive toolkit to extract phenological time series data from digital repeat photography

Science.gov (United States)

Seyednasrollah, B.; Milliman, T. E.; Hufkens, K.; Kosmala, M.; Richardson, A. D.

2017-12-01

Near-surface remote sensing and in situ photography are powerful tools to study how climate change and climate variability influence vegetation phenology and the associated seasonal rhythms of green-up and senescence. The rapidly-growing PhenoCam network has been using in situ digital repeat photography to study phenology in almost 500 locations around the world, with an emphasis on North America. However, extracting time series data from multiple years of half-hourly imagery - while each set of images may contain several regions of interest (ROI's), corresponding to different species or vegetation types - is not always straightforward. Large volumes of data require substantial processing time, and changes (either intentional or accidental) in camera field of view requires adjustment of ROI masks. Here, we introduce and present "DrawROI" as an interactive web-based application for imagery from PhenoCam. DrawROI can also be used offline, as a fully independent toolkit that significantly facilitates extraction of phenological data from any stack of digital repeat photography images. DrawROI provides a responsive environment for phenological scientists to interactively a) delineate ROIs, b) handle field of view (FOV) shifts, and c) extract and export time series data characterizing image color (i.e. red, green and blue channel digital numbers for the defined ROI). The application utilizes artificial intelligence and advanced machine learning techniques and gives user the opportunity to redraw new ROIs every time an FOV shift occurs. DrawROI also offers a quality control flag to indicate noisy data and images with low quality due to presence of foggy weather or snow conditions. The web-based application significantly accelerates the process of creating new ROIs and modifying pre-existing ROI in the PhenoCam database. The offline toolkit is presented as an open source R-package that can be used with similar datasets with time-lapse photography to obtain more data for
[Advances in application of clustered regularly interspaced short palindromic repeats (CRISPR)/CRISPR-associated 9 system in stem cells research].

Science.gov (United States)

Sun, S J; Huo, J H; Geng, Z J; Sun, X Y; Fu, X B

2018-04-20

Gene engineering has attracted worldwide attention because of its ability of precise location of disease mutations in genome. As a new gene editing technology, clustered regularly interspaced short palindromic repeats (CRISPR)/CRISPR-associated 9 (Cas9) system is simple, fast, and accurate to operate at a specific gene site. It overcomes the long-standing problem of conventional operation. At the same time, stem cells are a good foundation for establishing disease model in vitro. Therefore, it has great significance to combine stem cells with the rapidly developing gene manipulation techniques. In this review, we mainly focus on the mechanism of CRISPR/Cas9 technology and its application in stem cell genomic editing, so as to pave the way for promoting rapid application and development of CRISPR/Cas9 technology.
Improving Design with Open Innovation

DEFF Research Database (Denmark)

Christiansen, John K.; Gasparin, Marta; Varnes, Claus

2013-01-01

of the best practices for open innovation. However, projects were not equally successful. The outcome seems to be highly influenced by the type of collaborative arrangements used and their application. In particular, the analysis indicates that organizational factors seem to be indicative but not sufficient...... in open innovation need both a broad knowledge of the various potential elements of an open innovation effort and a flexible attitude toward their application. INSET: Summary of Projects....
Integrating pipeline data management application and Google maps dataset on web based GIS application unsing open source technology Sharp Map and Open Layers

Energy Technology Data Exchange (ETDEWEB)

Wisianto, Arie; Sania, Hidayatus [PT PERTAMINA GAS, Bontang (Indonesia); Gumilar, Oki [PT PERTAMINA GAS, Jakarta (Indonesia)

2010-07-01

PT Pertamina Gas operates 3 pipe segments carrying natural gas from producers to PT Pupuk Kaltim in the Kalimantan area. The company wants to build a pipeline data management system consisting of pipeline facilities, inspections and risk assessments which would run on Geographic Information Systems (GIS) platforms. The aim of this paper is to present the integration of the pipeline data management system with GIS. A web based GIS application is developed using the combination of Google maps datasets with local spatial datasets. In addition, Open Layers is used to integrate pipeline data model and Google Map dataset into a single map display on Sharp Map. The GIS based pipeline data management system developed herein constitutes a low cost, powerful and efficient web based GIS solution.
Laser-induced construction of multi-branched CuS nanodendrites with excellent surface-enhanced Raman scattering spectroscopy in repeated applications.

Science.gov (United States)

Li, Shuang; Zhang, Hua; Xu, Linlin; Chen, Ming

2017-07-10

We report on the successful fabrication of multi-branched CuS nanodendrites with average branch length of about 20 nm by laser ablation of bulk Cu target in thioacetamide (TAA) solution. During the nucleation of Cu and S species, the accurate anisotropic growth should be attributed to an ultra-rapid acid etching process by laser-induced TAA hydrolyzing reaction. Interestingly, the semiconductor CuS nanodendrites provide pronounced surface enhanced Raman scattering (SERS) properties with noble-metal comparable activity and a detection limit as low as ~10 -10 M, approaching the requirement (~nM) for single molecule detection. More importantly, after SERS analysis, the crystal violet (CV) probe molecules can be effectively removed from the substrate by 1064nm laser irradiation-induced moderate thermal treatment. Therefore, the unique and distinctive advantage is that the as-prepared CuS nanodendrites exhibit excellent reusability for 60 cycles of repeated SERS analyses. The low-cost CuS semiconductor nanodendrites with enhanced SERS properties should be established as a prominent SERS-based ultrasensitive probe in the repeated applications.
Repeating and non-repeating fast radio bursts from binary neutron star mergers

Science.gov (United States)

Yamasaki, Shotaro; Totani, Tomonori; Kiuchi, Kenta

2018-04-01

Most fast radio bursts (FRB) do not show evidence of repetition, and such non-repeating FRBs may be produced at the time of a merger of binary neutron stars (BNS), provided that the BNS merger rate is close to the high end of the currently possible range. However, the merger environment is polluted by dynamical ejecta, which may prohibit the radio signal from propagating. We examine this by using a general-relativistic simulation of a BNS merger, and show that the ejecta appears about 1 ms after the rotation speed of the merged star becomes the maximum. Therefore there is a time window in which an FRB signal can reach outside, and the short duration of non-repeating FRBs can be explained by screening after ejecta formation. A fraction of BNS mergers may leave a rapidly rotating and stable neutron star, and such objects may be the origin of repeating FRBs like FRB 121102. We show that a merger remnant would appear as a repeating FRB on a time scale of ˜1-10 yr, and expected properties are consistent with the observations of FRB 121102. We construct an FRB rate evolution model that includes these two populations of repeating and non-repeating FRBs from BNS mergers, and show that the detection rate of repeating FRBs relative to non-repeating ones rapidly increases with improving search sensitivity. This may explain why only the repeating FRB 121102 was discovered by the most sensitive FRB search with Arecibo. Several predictions are made, including the appearance of a repeating FRB 1-10 yr after a BNS merger that is localized by gravitational waves and subsequent electromagnetic radiation.
Open-source software platform for medical image segmentation applications

Science.gov (United States)

Namías, R.; D'Amato, J. P.; del Fresno, M.

2017-11-01

Segmenting 2D and 3D images is a crucial and challenging problem in medical image analysis. Although several image segmentation algorithms have been proposed for different applications, no universal method currently exists. Moreover, their use is usually limited when detection of complex and multiple adjacent objects of interest is needed. In addition, the continually increasing volumes of medical imaging scans require more efficient segmentation software design and highly usable applications. In this context, we present an extension of our previous segmentation framework which allows the combination of existing explicit deformable models in an efficient and transparent way, handling simultaneously different segmentation strategies and interacting with a graphic user interface (GUI). We present the object-oriented design and the general architecture which consist of two layers: the GUI at the top layer, and the processing core filters at the bottom layer. We apply the framework for segmenting different real-case medical image scenarios on public available datasets including bladder and prostate segmentation from 2D MRI, and heart segmentation in 3D CT. Our experiments on these concrete problems show that this framework facilitates complex and multi-object segmentation goals while providing a fast prototyping open-source segmentation tool.
An Experimental Protocol for Assessing the Performance of New Ultrasound Probes Based on CMUT Technology in Application to Brain Imaging.

Science.gov (United States)

Matrone, Giulia; Ramalli, Alessandro; Savoia, Alessandro Stuart; Quaglia, Fabio; Castellazzi, Gloria; Morbini, Patrizia; Piastra, Marco

2017-09-24

The possibility to perform an early and repeatable assessment of imaging performance is fundamental in the design and development process of new ultrasound (US) probes. Particularly, a more realistic analysis with application-specific imaging targets can be extremely valuable to assess the expected performance of US probes in their potential clinical field of application. The experimental protocol presented in this work was purposely designed to provide an application-specific assessment procedure for newly-developed US probe prototypes based on Capacitive Micromachined Ultrasonic Transducer (CMUT) technology in relation to brain imaging. The protocol combines the use of a bovine brain fixed in formalin as the imaging target, which ensures both realism and repeatability of the described procedures, and of neuronavigation techniques borrowed from neurosurgery. The US probe is in fact connected to a motion tracking system which acquires position data and enables the superposition of US images to reference Magnetic Resonance (MR) images of the brain. This provides a means for human experts to perform a visual qualitative assessment of the US probe imaging performance and to compare acquisitions made with different probes. Moreover, the protocol relies on the use of a complete and open research and development system for US image acquisition, i.e. the Ultrasound Advanced Open Platform (ULA-OP) scanner. The manuscript describes in detail the instruments and procedures involved in the protocol, in particular for the calibration, image acquisition and registration of US and MR images. The obtained results prove the effectiveness of the overall protocol presented, which is entirely open (within the limits of the instrumentation involved), repeatable, and covers the entire set of acquisition and processing activities for US images.
Repfinder: Finding approximately repeated scene elements for image editing

KAUST Repository

Cheng, Ming-Ming

2010-07-26

Repeated elements are ubiquitous and abundant in both manmade and natural scenes. Editing such images while preserving the repetitions and their relations is nontrivial due to overlap, missing parts, deformation across instances, illumination variation, etc. Manually enforcing such relations is laborious and error-prone. We propose a novel framework where user scribbles are used to guide detection and extraction of such repeated elements. Our detection process, which is based on a novel boundary band method, robustly extracts the repetitions along with their deformations. The algorithm only considers the shape of the elements, and ignores similarity based on color, texture, etc. We then use topological sorting to establish a partial depth ordering of overlapping repeated instances. Missing parts on occluded instances are completed using information from other instances. The extracted repeated instances can then be seamlessly edited and manipulated for a variety of high level tasks that are otherwise difficult to perform. We demonstrate the versatility of our framework on a large set of inputs of varying complexity, showing applications to image rearrangement, edit transfer, deformation propagation, and instance replacement. © 2010 ACM.

The effects of repeated Ozurdex injections on ocular hypertension

Directory of Open Access Journals (Sweden)

Bahadorani S

2018-04-01

Full Text Available Sepehr Bahadorani,1 Chelsey Krambeer,2 Kendall Wannamaker,1 Wayne Tie,1 Michael Jansen,1 Jason Espitia,2 Jeong-Hyeon Sohn,1 Michael A Singer2 1Department of Ophthalmology, University of Texas Health Science Center at San Antonio, San Antonio, TX, USA; 2Medical Center Ophthalmology Associates, San Antonio, TX, USA Purpose: The purpose of this study was to correlate the degree of ocular hypertension with the number of Ozurdex injections.Methods: Intraocular pressure (IOP fluctuations for a total of 183 injections were studied over a period of at least 12 months. The main indications for treatment were uveitis, diabetic macular edema, and retinal vein occlusion.Results: Results of the study demonstrate that repeated Ozurdex injections do not increase the frequency of IOP spikes beyond 30 mmHg. For lower IOPs, however, a positive correlation exists. Furthermore, patients with primary open angle glaucoma and uveitis had the highest IOP response to repeated injections. On average, patients with an IOP of ≥28.6 mmHg received pressure lowering medications, after which their IOP reached a stable level (16.7 mmHg without the need for additional interventions.Conclusion: The data support the conclusion that multiple Ozurdex injections does not increase the frequency of IOP spikes beyond 30 mmHg, but patients still must be closely monitored if they have a history of primary open angle glaucoma. Keywords: Ozurdex, dexamethasone, glaucoma, intraocular pressure, ocular hypertension
OpenSeesPy: Python library for the OpenSees finite element framework

Science.gov (United States)

Zhu, Minjie; McKenna, Frank; Scott, Michael H.

2018-01-01

OpenSees, an open source finite element software framework, has been used broadly in the earthquake engineering community for simulating the seismic response of structural and geotechnical systems. The framework allows users to perform finite element analysis with a scripting language and for developers to create both serial and parallel finite element computer applications as interpreters. For the last 15 years, Tcl has been the primary scripting language to which the model building and analysis modules of OpenSees are linked. To provide users with different scripting language options, particularly Python, the OpenSees interpreter interface was refactored to provide multi-interpreter capabilities. This refactoring, resulting in the creation of OpenSeesPy as a Python module, is accomplished through an abstract interface for interpreter calls with concrete implementations for different scripting languages. Through this approach, users are able to develop applications that utilize the unique features of several scripting languages while taking advantage of advanced finite element analysis models and algorithms.
Quantification of larval zebrafish motor function in multiwell plates using open-source MATLAB applications.

Science.gov (United States)

Zhou, Yangzhong; Cattley, Richard T; Cario, Clinton L; Bai, Qing; Burton, Edward A

2014-07-01

This article describes a method to quantify the movements of larval zebrafish in multiwell plates, using the open-source MATLAB applications LSRtrack and LSRanalyze. The protocol comprises four stages: generation of high-quality, flatly illuminated video recordings with exposure settings that facilitate object recognition; analysis of the resulting recordings using tools provided in LSRtrack to optimize tracking accuracy and motion detection; analysis of tracking data using LSRanalyze or custom MATLAB scripts; and implementation of validation controls. The method is reliable, automated and flexible, requires plate format suitable for high-throughput applications.
An Open-Structure Treadmill Gait Trainer: From Research to Application

Directory of Open Access Journals (Sweden)

Jian Li

2017-01-01

Full Text Available Lower limb rehabilitation robots are designed to enhance gait function in individuals with motor impairments. Although numerous rehabilitation robots have been developed, only few of these robots have been used in practical health care, particularly in China. The objective of this study is to construct a lower limb rehabilitation robot and bridge the gap between research and application. Open structure to facilitate practical application was created for the whole robot. Three typical movement patterns of a single leg were adopted in designing the exoskeletons, and force models for patient training were established and analyzed under three different conditions, respectively, and then a control system and security strategy were introduced. After establishing the robot, a preliminary experiment on the actual use of a prototype by patients was conducted to validate the functionality of the robot. The experiment showed that different patients and stages displayed different performances, and results on the trend variations across patients and across stages confirmed the validity of the robot and suggested that the design may lead to a system that could be successful in the treatment of patients with walking disorders in China. Furthermore, this study could provide a reference for a similar application design.
Realization of Best-in-Class Workflows Using Open Spirit Technology

International Nuclear Information System (INIS)

Hauser, K.

2002-01-01

Open Spirit is the realization of a long sought after dream to create an open systems approach to G and G computing. The focus is on developing a plug-and-play, platform independent, vendor neutral application framework to enable workflow optimization for the oil and gas industry. Through Open Spirit, Oil and gas clients can either develop or purchase Open Spirit enabled applications and combine those applications together to optimize a particular workflow. Currently Open Spirit supports GeoQuest's Geo Frame and Landmark's Open Works project data stores. There are three primary benefits to using Open Spirit enabled applications. Users of Open Spirit enabled applications can access data from a variety of data sources without having to move or reformat the data. This reduces the time to get the information into the appropriate application and eliminates the need to have multiple copies of the same data, simplifying data management efforts. Second, Open Spirit bridges the gap between Unix and PC applications. Through Open Spirit, any applications developed for the NT platform can access information residing in a Unix project data store. Third, Open Spirit supports the concept of a virtual project set. A user can combine any number project data stores (GeoFrame, Open Works, Finder, RECALL and PDS/Tigress) and use the combined project sets as if they were a single project. The data is not moved, but instead accessed dynamically through Open Spirit from the appropriate native data store. Open Spirit allows interpreters to develop their own Best-in-Class workflow and to mix and match the applications they determine to be the best of their interpretation teams independent of vendor
Free and open-source software application for the evaluation of coronary computed tomography angiography images.

Science.gov (United States)

Hadlich, Marcelo Souza; Oliveira, Gláucia Maria Moraes; Feijóo, Raúl A; Azevedo, Clerio F; Tura, Bernardo Rangel; Ziemer, Paulo Gustavo Portela; Blanco, Pablo Javier; Pina, Gustavo; Meira, Márcio; Souza e Silva, Nelson Albuquerque de

2012-10-01

The standardization of images used in Medicine in 1993 was performed using the DICOM (Digital Imaging and Communications in Medicine) standard. Several tests use this standard and it is increasingly necessary to design software applications capable of handling this type of image; however, these software applications are not usually free and open-source, and this fact hinders their adjustment to most diverse interests. To develop and validate a free and open-source software application capable of handling DICOM coronary computed tomography angiography images. We developed and tested the ImageLab software in the evaluation of 100 tests randomly selected from a database. We carried out 600 tests divided between two observers using ImageLab and another software sold with Philips Brilliance computed tomography appliances in the evaluation of coronary lesions and plaques around the left main coronary artery (LMCA) and the anterior descending artery (ADA). To evaluate intraobserver, interobserver and intersoftware agreements, we used simple and kappa statistics agreements. The agreements observed between software applications were generally classified as substantial or almost perfect in most comparisons. The ImageLab software agreed with the Philips software in the evaluation of coronary computed tomography angiography tests, especially in patients without lesions, with lesions 70% in the ADA was lower, but this is also observed when the anatomical reference standard is used.
The OpenFOAM technology primer

CERN Document Server

Maric, Tomislav; Mooney, Kyle

2014-01-01

This book covers two main aspects of working with OpenFOAM: using the applications and developing and extending the library code. In the first part of the book, we chose a few utilities and applications to describe the OpenFOAM work flow. This information should provide a sufficient starting point for the reader, who can investigate his/her interests further by following the provided instructions in a similar way for another solver or application.
Research on e-commerce transaction networks using multi-agent modelling and open application programming interface

Science.gov (United States)

Piao, Chunhui; Han, Xufang; Wu, Harris

2010-08-01

We provide a formal definition of an e-commerce transaction network. Agent-based modelling is used to simulate e-commerce transaction networks. For real-world analysis, we studied the open application programming interfaces (APIs) from eBay and Taobao e-commerce websites and captured real transaction data. Pajek is used to visualise the agent relationships in the transaction network. We derived one-mode networks from the transaction network and analysed them using degree and betweenness centrality. Integrating multi-agent modelling, open APIs and social network analysis, we propose a new way to study large-scale e-commerce systems.
Owgis 2.0: Open Source Java Application that Builds Web GIS Interfaces for Desktop Andmobile Devices

Science.gov (United States)

Zavala Romero, O.; Chassignet, E.; Zavala-Hidalgo, J.; Pandav, H.; Velissariou, P.; Meyer-Baese, A.

2016-12-01

OWGIS is an open source Java and JavaScript application that builds easily configurable Web GIS sites for desktop and mobile devices. The current version of OWGIS generates mobile interfaces based on HTML5 technology and can be used to create mobile applications. The style of the generated websites can be modified using COMPASS, a well known CSS Authoring Framework. In addition, OWGIS uses several Open Geospatial Consortium standards to request datafrom the most common map servers, such as GeoServer. It is also able to request data from ncWMS servers, allowing the websites to display 4D data from NetCDF files. This application is configured by XML files that define which layers, geographic datasets, are displayed on the Web GIS sites. Among other features, OWGIS allows for animations; streamlines from vector data; virtual globe display; vertical profiles and vertical transects; different color palettes; the ability to download data; and display text in multiple languages. OWGIS users are mainly scientists in the oceanography, meteorology and climate fields.
Free software and open source databases

Directory of Open Access Journals (Sweden)

Napoleon Alexandru SIRITEANU

2006-01-01

Full Text Available The emergence of free/open source software -FS/OSS- enterprises seeks to push software development out of the academic stream into the commercial mainstream, and as a result, end-user applications such as open source database management systems (PostgreSQL, MySQL, Firebird are becoming more popular. Companies like Sybase, Oracle, Sun, IBM are increasingly implementing open source strategies and porting programs/applications into the Linux environment. Open source software is redefining the software industry in general and database development in particular.
Automated detection of repeated structures in building facades

Directory of Open Access Journals (Sweden)

M. Previtali

2013-10-01

Full Text Available Automatic identification of high-level repeated structures in 3D point clouds of building façades is crucial for applications like digitalization and building modelling. Indeed, in many architectural styles building façades are governed by arrangements of objects into repeated patterns. In particular, façades are generally designed as the repetition of some few basic objects organized into interlaced and\\or concatenated grid structures. Starting from this key observation, this paper presents an algorithm for Repeated Structure Detection (RSD in 3D point clouds of building façades. The presented methodology consists of three main phases. First, in the point cloud segmentation stage (i the building façade is decomposed into planar patches which are classified by means of some weak prior knowledge of urban buildings formulated in a classification tree. Secondly (ii, in the element clustering phase detected patches are grouped together by means of a similarity function and pairwise transformations between patches are computed. Eventually (iii, in the structure regularity estimation step the parameters of repeated grid patterns are calculated by using a Least- Squares optimization. Workability of the presented approach is tested using some real data from urban scenes.
A Unified Model for Repeating and Non-repeating Fast Radio Bursts

International Nuclear Information System (INIS)

Bagchi, Manjari

2017-01-01

The model that fast radio bursts (FRBs) are caused by plunges of asteroids onto neutron stars can explain both repeating and non-repeating bursts. If a neutron star passes through an asteroid belt around another star, there would be a series of bursts caused by a series of asteroid impacts. Moreover, the neutron star would cross the same belt repetitively if it were in a binary with the star hosting the asteroid belt, leading to a repeated series of bursts. I explore the properties of neutron star binaries that could lead to the only known repeating FRB so far (FRB121102). In this model, the next two epochs of bursts are expected around 2017 February 27 and 2017 December 18. On the other hand, if the asteroid belt is located around the neutron star itself, then a chance fall of an asteroid from that belt onto the neutron star would lead to a non-repeating burst. Even a neutron star grazing an asteroid belt can lead to a non-repeating burst caused by just one asteroid plunge during the grazing. This is possible even when the neutron star is in a binary with the asteroid-hosting star, if the belt and the neutron star orbit are non-coplanar.
A Unified Model for Repeating and Non-repeating Fast Radio Bursts

Energy Technology Data Exchange (ETDEWEB)

Bagchi, Manjari, E-mail: manjari@imsc.res.in [The Institute of Mathematical Sciences (IMSc-HBNI), 4th Cross Road, CIT Campus, Taramani, Chennai 600113 (India)

2017-04-01

The model that fast radio bursts (FRBs) are caused by plunges of asteroids onto neutron stars can explain both repeating and non-repeating bursts. If a neutron star passes through an asteroid belt around another star, there would be a series of bursts caused by a series of asteroid impacts. Moreover, the neutron star would cross the same belt repetitively if it were in a binary with the star hosting the asteroid belt, leading to a repeated series of bursts. I explore the properties of neutron star binaries that could lead to the only known repeating FRB so far (FRB121102). In this model, the next two epochs of bursts are expected around 2017 February 27 and 2017 December 18. On the other hand, if the asteroid belt is located around the neutron star itself, then a chance fall of an asteroid from that belt onto the neutron star would lead to a non-repeating burst. Even a neutron star grazing an asteroid belt can lead to a non-repeating burst caused by just one asteroid plunge during the grazing. This is possible even when the neutron star is in a binary with the asteroid-hosting star, if the belt and the neutron star orbit are non-coplanar.
Effect of Repeated Screw Joint Closing and Opening Cycles and Cyclic Loading on Abutment Screw Removal Torque and Screw Thread Morphology: Scanning Electron Microscopy Evaluation.

Science.gov (United States)

Arshad, Mahnaz; Mahgoli, Hosseinali; Payaminia, Leila

To evaluate the effect of repeated screw joint closing and opening cycles and cyclic loading on abutment screw removal torque and screw thread morphology using scanning electron microscopy (SEM). Three groups (n = 10 in each group) of implant-abutment-abutment screw assemblies were created. There were also 10 extra abutment screws as new screws in group 3. The abutment screws were tightened to 12 Ncm with an electronic torque meter; then they were removed and removal torque values were recorded. This sequence was repeated 5 times for group 1 and 15 times for groups 2 and 3. The same screws in groups 1 and 2 and the new screws in group 3 were then tightened to 12 Ncm; this was also followed by screw tightening to 30 Ncm and retightening to 30 Ncm 15 minutes later. Removal torque measurements were performed after screws were subjected to cyclic loading (0.5 × 10⁶ cycles; 1 Hz; 75 N). Moreover, the surface topography of one screw from each group before and after cyclic loading was evaluated with SEM and compared with an unused screw. All groups exhibited reduced removal torque values in comparison to insertion torque in each cycle. However, there was a steady trend of torque loss in each group. A comparison of the last cycle of the groups before loading showed significantly greater torque loss value in the 15th cycle of groups 2 and 3 compared with the fifth cycle of group 1 (P abutment is definitively placed.
Deployment Repeatability

Science.gov (United States)

2016-04-01

evaluating the deployment repeatability builds upon the testing or analysis of deployment kinematics (Chapter 6) and adds repetition. Introduction...material yield or failure during a test. For the purposes of this chapter, zero shift will refer to permanent changes in the structure, while reversible ...the content of other chapters in this book: Gravity Compensation (Chapter 4) and Deployment Kinematics and Dynamics (Chapter 6). Repeating the
Reconfigurable multiport EPON repeater

Science.gov (United States)

Oishi, Masayuki; Inohara, Ryo; Agata, Akira; Horiuchi, Yukio

2009-11-01

An extended reach EPON repeater is one of the solutions to effectively expand FTTH service areas. In this paper, we propose a reconfigurable multi-port EPON repeater for effective accommodation of multiple ODNs with a single OLT line card. The proposed repeater, which has multi-ports in both OLT and ODN sides, consists of TRs, BTRs with the CDR function and a reconfigurable electrical matrix switch, can accommodate multiple ODNs to a single OLT line card by controlling the connection of the matrix switch. Although conventional EPON repeaters require full OLT line cards to accommodate subscribers from the initial installation stage, the proposed repeater can dramatically reduce the number of required line cards especially when the number of subscribers is less than a half of the maximum registerable users per OLT. Numerical calculation results show that the extended reach EPON system with the proposed EPON repeater can save 17.5% of the initial installation cost compared with a conventional repeater, and can be less expensive than conventional systems up to the maximum subscribers especially when the percentage of ODNs in lightly-populated areas is higher.
Five-Phase Five-Level Open-Winding/Star-Winding Inverter Drive for Low-Voltage/High-Current Applications

DEFF Research Database (Denmark)

Padmanaban, Sanjeevi Kumar; Blaabjerg, Frede; Wheeler, Patrick

2016-01-01

This paper work proposed a five-phase five-level open-/star-winding multilevel AC converter suitable for low-voltage/high-current applications. Modular converter consists of classical two-level five-phase voltage source inverter (VSI) with slight reconfiguration to serve as a multilevel converter...... for open-/star-winding loads. Elaborately, per phase of the VSI is built with one additional bi-directional switch (MOSFET/IGBT) and all five legs links to the neutral through two capacitors. The structure allows multilevel generation to five-level output with greater potential for fault tolerability under...
Investigation of a Quadruplex-Forming Repeat Sequence Highly Enriched in Xanthomonas and Nostoc sp.

Directory of Open Access Journals (Sweden)

Charlotte Rehm

Full Text Available In prokaryotes simple sequence repeats (SSRs with unit sizes of 1-5 nucleotides (nt are causative for phase and antigenic variation. Although an increased abundance of heptameric repeats was noticed in bacteria, reports about SSRs of 6-9 nt are rare. In particular G-rich repeat sequences with the propensity to fold into G-quadruplex (G4 structures have received little attention. In silico analysis of prokaryotic genomes show putative G4 forming sequences to be abundant. This report focuses on a surprisingly enriched G-rich repeat of the type GGGNATC in Xanthomonas and cyanobacteria such as Nostoc. We studied in detail the genomes of Xanthomonas campestris pv. campestris ATCC 33913 (Xcc, Xanthomonas axonopodis pv. citri str. 306 (Xac, and Nostoc sp. strain PCC7120 (Ana. In all three organisms repeats are spread all over the genome with an over-representation in non-coding regions. Extensive variation of the number of repetitive units was observed with repeat numbers ranging from two up to 26 units. However a clear preference for four units was detected. The strong bias for four units coincides with the requirement of four consecutive G-tracts for G4 formation. Evidence for G4 formation of the consensus repeat sequences was found in biophysical studies utilizing CD spectroscopy. The G-rich repeats are preferably located between aligned open reading frames (ORFs and are under-represented in coding regions or between divergent ORFs. The G-rich repeats are preferentially located within a distance of 50 bp upstream of an ORF on the anti-sense strand or within 50 bp from the stop codon on the sense strand. Analysis of whole transcriptome sequence data showed that the majority of repeat sequences are transcribed. The genetic loci in the vicinity of repeat regions show increased genomic stability. In conclusion, we introduce and characterize a special class of highly abundant and wide-spread quadruplex-forming repeat sequences in bacteria.
Investigation of a Quadruplex-Forming Repeat Sequence Highly Enriched in Xanthomonas and Nostoc sp.

Science.gov (United States)

Rehm, Charlotte; Wurmthaler, Lena A; Li, Yuanhao; Frickey, Tancred; Hartig, Jörg S

2015-01-01

In prokaryotes simple sequence repeats (SSRs) with unit sizes of 1-5 nucleotides (nt) are causative for phase and antigenic variation. Although an increased abundance of heptameric repeats was noticed in bacteria, reports about SSRs of 6-9 nt are rare. In particular G-rich repeat sequences with the propensity to fold into G-quadruplex (G4) structures have received little attention. In silico analysis of prokaryotic genomes show putative G4 forming sequences to be abundant. This report focuses on a surprisingly enriched G-rich repeat of the type GGGNATC in Xanthomonas and cyanobacteria such as Nostoc. We studied in detail the genomes of Xanthomonas campestris pv. campestris ATCC 33913 (Xcc), Xanthomonas axonopodis pv. citri str. 306 (Xac), and Nostoc sp. strain PCC7120 (Ana). In all three organisms repeats are spread all over the genome with an over-representation in non-coding regions. Extensive variation of the number of repetitive units was observed with repeat numbers ranging from two up to 26 units. However a clear preference for four units was detected. The strong bias for four units coincides with the requirement of four consecutive G-tracts for G4 formation. Evidence for G4 formation of the consensus repeat sequences was found in biophysical studies utilizing CD spectroscopy. The G-rich repeats are preferably located between aligned open reading frames (ORFs) and are under-represented in coding regions or between divergent ORFs. The G-rich repeats are preferentially located within a distance of 50 bp upstream of an ORF on the anti-sense strand or within 50 bp from the stop codon on the sense strand. Analysis of whole transcriptome sequence data showed that the majority of repeat sequences are transcribed. The genetic loci in the vicinity of repeat regions show increased genomic stability. In conclusion, we introduce and characterize a special class of highly abundant and wide-spread quadruplex-forming repeat sequences in bacteria.
HEART TRANSPLANTATION IN PATIENTS WITH PREVIOUS OPEN HEART SURGERY

Directory of Open Access Journals (Sweden)

R. Sh. Saitgareev

2016-01-01

Full Text Available Heart Transplantation (HTx to date remains the most effective and radical method of treatment of patients with end-stage heart failure. The defi cit of donor hearts is forcing to resort increasingly to the use of different longterm mechanical circulatory support systems, including as a «bridge» to the follow-up HTx. According to the ISHLT Registry the number of recipients underwent cardiopulmonary bypass surgery increased from 40% in the period from 2004 to 2008 to 49.6% for the period from 2009 to 2015. HTx performed in repeated patients, on the one hand, involves considerable technical diffi culties and high risks; on the other hand, there is often no alternative medical intervention to HTx, and if not dictated by absolute contradictions the denial of the surgery is equivalent to 100% mortality. This review summarizes the results of a number of published studies aimed at understanding the immediate and late results of HTx in patients, previously underwent open heart surgery. The effect of resternotomy during HTx and that of the specifi c features associated with its implementation in recipients previously operated on open heart, and its effects on the immediate and long-term survival were considered in this review. Results of studies analyzing the risk factors for perioperative complications in repeated recipients were also demonstrated. Separately, HTx risks after implantation of prolonged mechanical circulatory support systems were examined. The literature does not allow to clearly defi ning the impact factor of earlier performed open heart surgery on the course of perioperative period and on the prognosis of survival in recipients who underwent HTx. On the other hand, subject to the regular fl ow of HTx and the perioperative period the risks in this clinical situation are justifi ed as a long-term prognosis of recipients previously conducted open heart surgery and are comparable to those of patients who underwent primary HTx. Studies

Performance Characteristics of Hybrid MPI/OpenMP Scientific Applications on a Large-Scale Multithreaded BlueGene/Q Supercomputer

KAUST Repository

Wu, Xingfu; Taylor, Valerie

2013-01-01

In this paper, we investigate the performance characteristics of five hybrid MPI/OpenMP scientific applications (two NAS Parallel benchmarks Multi-Zone SP-MZ and BT-MZ, an earthquake simulation PEQdyna, an aerospace application PMLB and a 3D particle-in-cell application GTC) on a large-scale multithreaded Blue Gene/Q supercomputer at Argonne National laboratory, and quantify the performance gap resulting from using different number of threads per node. We use performance tools and MPI profile and trace libraries available on the supercomputer to analyze and compare the performance of these hybrid scientific applications with increasing the number OpenMP threads per node, and find that increasing the number of threads to some extent saturates or worsens performance of these hybrid applications. For the strong-scaling hybrid scientific applications such as SP-MZ, BT-MZ, PEQdyna and PLMB, using 32 threads per node results in much better application efficiency than using 64 threads per node, and as increasing the number of threads per node, the FPU (Floating Point Unit) percentage decreases, and the MPI percentage (except PMLB) and IPC (Instructions per cycle) per core (except BT-MZ) increase. For the weak-scaling hybrid scientific application such as GTC, the performance trend (relative speedup) is very similar with increasing number of threads per node no matter how many nodes (32, 128, 512) are used. © 2013 IEEE.
Performance Characteristics of Hybrid MPI/OpenMP Scientific Applications on a Large-Scale Multithreaded BlueGene/Q Supercomputer

KAUST Repository

Wu, Xingfu

2013-07-01

In this paper, we investigate the performance characteristics of five hybrid MPI/OpenMP scientific applications (two NAS Parallel benchmarks Multi-Zone SP-MZ and BT-MZ, an earthquake simulation PEQdyna, an aerospace application PMLB and a 3D particle-in-cell application GTC) on a large-scale multithreaded Blue Gene/Q supercomputer at Argonne National laboratory, and quantify the performance gap resulting from using different number of threads per node. We use performance tools and MPI profile and trace libraries available on the supercomputer to analyze and compare the performance of these hybrid scientific applications with increasing the number OpenMP threads per node, and find that increasing the number of threads to some extent saturates or worsens performance of these hybrid applications. For the strong-scaling hybrid scientific applications such as SP-MZ, BT-MZ, PEQdyna and PLMB, using 32 threads per node results in much better application efficiency than using 64 threads per node, and as increasing the number of threads per node, the FPU (Floating Point Unit) percentage decreases, and the MPI percentage (except PMLB) and IPC (Instructions per cycle) per core (except BT-MZ) increase. For the weak-scaling hybrid scientific application such as GTC, the performance trend (relative speedup) is very similar with increasing number of threads per node no matter how many nodes (32, 128, 512) are used. © 2013 IEEE.
Collaborative Web between open and closed science

Directory of Open Access Journals (Sweden)

Alessandro Delfanti

2008-06-01

Full Text Available “Web 2.0” is the mantra enthusiastically repeated in the past few years on anything concerning the production of culture, dialogue and online communication. Even science is changing, along with the processes involving the communication, collaboration and cooperation created through the web, yet rooted in some of its historical features of openness. For this issue, JCOM has asked some experts on the most recent changes in science to analyse the potential and the contradictions lying in online collaborative science. The new open science feeds on the opportunity to freely contribute to knowledge production, sharing not only data, but also software and hardware. But it is open also to the outside, where citizens use Web 2.0 instruments to discuss about science in a horizontal way.
Formal Definitions of Unbounded Evolution and Innovation Reveal Universal Mechanisms for Open-Ended Evolution in Dynamical Systems.

Science.gov (United States)

Adams, Alyssa; Zenil, Hector; Davies, Paul C W; Walker, Sara Imari

2017-04-20

Open-ended evolution (OEE) is relevant to a variety of biological, artificial and technological systems, but has been challenging to reproduce in silico. Most theoretical efforts focus on key aspects of open-ended evolution as it appears in biology. We recast the problem as a more general one in dynamical systems theory, providing simple criteria for open-ended evolution based on two hallmark features: unbounded evolution and innovation. We define unbounded evolution as patterns that are non-repeating within the expected Poincare recurrence time of an isolated system, and innovation as trajectories not observed in isolated systems. As a case study, we implement novel variants of cellular automata (CA) where the update rules are allowed to vary with time in three alternative ways. Each is capable of generating conditions for open-ended evolution, but vary in their ability to do so. We find that state-dependent dynamics, regarded as a hallmark of life, statistically out-performs other candidate mechanisms, and is the only mechanism to produce open-ended evolution in a scalable manner, essential to the notion of ongoing evolution. This analysis suggests a new framework for unifying mechanisms for generating OEE with features distinctive to life and its artifacts, with broad applicability to biological and artificial systems.
A repeatable and scalable fabrication method for sharp, hollow silicon microneedles

Science.gov (United States)

Kim, H.; Theogarajan, L. S.; Pennathur, S.

2018-03-01

Scalability and manufacturability are impeding the mass commercialization of microneedles in the medical field. Specifically, microneedle geometries need to be sharp, beveled, and completely controllable, difficult to achieve with microelectromechanical fabrication techniques. In this work, we performed a parametric study using silicon etch chemistries to optimize the fabrication of scalable and manufacturable beveled silicon hollow microneedles. We theoretically verified our parametric results with diffusion reaction equations and created a design guideline for a various set of miconeedles (80-160 µm needle base width, 100-1000 µm pitch, 40-50 µm inner bore diameter, and 150-350 µm height) to show the repeatability, scalability, and manufacturability of our process. As a result, hollow silicon microneedles with any dimensions can be fabricated with less than 2% non-uniformity across a wafer and 5% deviation between different processes. The key to achieving such high uniformity and consistency is a non-agitated HF-HNO3 bath, silicon nitride masks, and surrounding silicon filler materials with well-defined dimensions. Our proposed method is non-labor intensive, well defined by theory, and straightforward for wafer scale mass production, opening doors to a plethora of potential medical and biosensing applications.
CheapStat: an open-source, "do-it-yourself" potentiostat for analytical and educational applications.

Directory of Open Access Journals (Sweden)

Aaron A Rowe

Full Text Available Although potentiostats are the foundation of modern electrochemical research, they have seen relatively little application in resource poor settings, such as undergraduate laboratory courses and the developing world. One reason for the low penetration of potentiostats is their cost, as even the least expensive commercially available laboratory potentiostats sell for more than one thousand dollars. An inexpensive electrochemical workstation could thus prove useful in educational labs, and increase access to electrochemistry-based analytical techniques for food, drug and environmental monitoring. With these motivations in mind, we describe here the CheapStat, an inexpensive (<$80, open-source (software and hardware, hand-held potentiostat that can be constructed by anyone who is proficient at assembling circuits. This device supports a number of potential waveforms necessary to perform cyclic, square wave, linear sweep and anodic stripping voltammetry. As we demonstrate, it is suitable for a wide range of applications ranging from food- and drug-quality testing to environmental monitoring, rapid DNA detection, and educational exercises. The device's schematics, parts lists, circuit board layout files, sample experiments, and detailed assembly instructions are available in the supporting information and are released under an open hardware license.
The Open Microscopy Environment: open image informatics for the biological sciences

Science.gov (United States)

Blackburn, Colin; Allan, Chris; Besson, Sébastien; Burel, Jean-Marie; Carroll, Mark; Ferguson, Richard K.; Flynn, Helen; Gault, David; Gillen, Kenneth; Leigh, Roger; Leo, Simone; Li, Simon; Lindner, Dominik; Linkert, Melissa; Moore, Josh; Moore, William J.; Ramalingam, Balaji; Rozbicki, Emil; Rustici, Gabriella; Tarkowska, Aleksandra; Walczysko, Petr; Williams, Eleanor; Swedlow, Jason R.

2016-07-01

Despite significant advances in biological imaging and analysis, major informatics challenges remain unsolved: file formats are proprietary, storage and analysis facilities are lacking, as are standards for sharing image data and results. While the open FITS file format is ubiquitous in astronomy, astronomical imaging shares many challenges with biological imaging, including the need to share large image sets using secure, cross-platform APIs, and the need for scalable applications for processing and visualization. The Open Microscopy Environment (OME) is an open-source software framework developed to address these challenges. OME tools include: an open data model for multidimensional imaging (OME Data Model); an open file format (OME-TIFF) and library (Bio-Formats) enabling free access to images (5D+) written in more than 145 formats from many imaging domains, including FITS; and a data management server (OMERO). The Java-based OMERO client-server platform comprises an image metadata store, an image repository, visualization and analysis by remote access, allowing sharing and publishing of image data. OMERO provides a means to manage the data through a multi-platform API. OMERO's model-based architecture has enabled its extension into a range of imaging domains, including light and electron microscopy, high content screening, digital pathology and recently into applications using non-image data from clinical and genomic studies. This is made possible using the Bio-Formats library. The current release includes a single mechanism for accessing image data of all types, regardless of original file format, via Java, C/C++ and Python and a variety of applications and environments (e.g. ImageJ, Matlab and R).
Open Ephys: an open-source, plugin-based platform for multichannel electrophysiology.

Science.gov (United States)

Siegle, Joshua H; López, Aarón Cuevas; Patel, Yogi A; Abramov, Kirill; Ohayon, Shay; Voigts, Jakob

2017-08-01

Closed-loop experiments, in which causal interventions are conditioned on the state of the system under investigation, have become increasingly common in neuroscience. Such experiments can have a high degree of explanatory power, but they require a precise implementation that can be difficult to replicate across laboratories. We sought to overcome this limitation by building open-source software that makes it easier to develop and share algorithms for closed-loop control. We created the Open Ephys GUI, an open-source platform for multichannel electrophysiology experiments. In addition to the standard 'open-loop' visualization and recording functionality, the GUI also includes modules for delivering feedback in response to events detected in the incoming data stream. Importantly, these modules can be built and shared as plugins, which makes it possible for users to extend the functionality of the GUI through a simple API, without having to understand the inner workings of the entire application. In combination with low-cost, open-source hardware for amplifying and digitizing neural signals, the GUI has been used for closed-loop experiments that perturb the hippocampal theta rhythm in a phase-specific manner. The Open Ephys GUI is the first widely used application for multichannel electrophysiology that leverages a plugin-based workflow. We hope that it will lower the barrier to entry for electrophysiologists who wish to incorporate real-time feedback into their research.
OpenShift cookbook

CERN Document Server

Gulati, Shekhar

2014-01-01

If you are a web application developer who wants to use the OpenShift platform to host your next big idea but are looking for guidance on how to achieve this, then this book is the first step you need to take. This is a very accessible cookbook where no previous knowledge of OpenShift is needed.
Open Hardware for CERN's accelerator control systems

International Nuclear Information System (INIS)

Bij, E van der; Serrano, J; Wlostowski, T; Cattin, M; Gousiou, E; Sanchez, P Alvarez; Boccardi, A; Voumard, N; Penacoba, G

2012-01-01

The accelerator control systems at CERN will be upgraded and many electronics modules such as analog and digital I/O, level converters and repeaters, serial links and timing modules are being redesigned. The new developments are based on the FPGA Mezzanine Card, PCI Express and VME64x standards while the Wishbone specification is used as a system on a chip bus. To attract partners, the projects are developed in an 'Open' fashion. Within this Open Hardware project new ways of working with industry are being evaluated and it has been proven that industry can be involved at all stages, from design to production and support.
Modeling intraindividual variability with repeated measures data methods and applications

CERN Document Server

Hershberger, Scott L

2013-01-01

This book examines how individuals behave across time and to what degree that behavior changes, fluctuates, or remains stable.It features the most current methods on modeling repeated measures data as reported by a distinguished group of experts in the field. The goal is to make the latest techniques used to assess intraindividual variability accessible to a wide range of researchers. Each chapter is written in a ""user-friendly"" style such that even the ""novice"" data analyst can easily apply the techniques.Each chapter features:a minimum discussion of mathematical detail;an empirical examp
[Investigation of a new highly porous hydroxyapatite matrix for obliterating open mastoid cavities - application in guinea pigs bulla].

Science.gov (United States)

Punke, C; Zehlicke, T; Boltze, C; Pau, H W

2009-04-01

Many different techniques for obliterating open mastoid cavity have been described. The results after the application of alloplastic materials like Hydroxyapatite and Tricalciumphosphate were poor due to long-lasting resorption. Extrusion of those materials has been described. We investigated the applicability of a new high-porosity ceramic for obliterating large open mastoid cavities and tested it in an animal model (bulla of guinea pig). A highly porous matrix (NanoBone) bone-inductor fabricated in a sol-gel-technique was administered unilaterally into the opened bullae of 30 guinea pigs. In each animal the opposite bulla was filled with Bio-Oss, a bone substitute consisting of a portion of mineral bovine bone. Histological evaluations were performed 1, 2, 3, 4, 5 and 12 weeks after the implantation. After the initial phase with an inflammatory reaction creating a loose granulation tissue, we observed the formation of trabeculare bone within the fourth week in both groups. From the fifth week on we found osteoclasts on the surface of NanoBone and Bio-Oss with consecutive degradation of both materials. In our animal model study we found beneficial properties of the used bone-inductors NanoBone and Bio-Oss for obliterating open mastoid cavities.
Highly Stable Trypsin-Aggregate Coatings on Polymer Nanofibers for Repeated Protein Digestion

Energy Technology Data Exchange (ETDEWEB)

Kim, Byoung Chan; Lopez-Ferrer, Daniel; Lee, Sang-mok; Ahn, Hye-kyung; Nair, Sujith; Kim, Seong H.; Kim, Beom S.; Petritis, Konstantinos; Camp, David G.; Grate, Jay W.; Smith, Richard D.; Koo, Yoon-mo; Gu, Man Bock; Kim, Jungbae

2009-04-01

A stable and robust trypsin-based biocatalytic system was developed and demonstrated for proteomic applications. The system utilizes polymer nanofibers coated with trypsin aggregates for immobilized protease digestions. After covalently attaching an initial layer of trypsin to the polymer nanofibers, highly concentrated trypsin molecules are crosslinked to the layered trypsin by way of a glutaraldehyde treatment. This new process produced a 300-fold increase in trypsin activity compared with a conventional method for covalent trypsin immobilization and proved to be robust in that it still maintained a high level of activity after a year of repeated recycling. This highly stable form of immobilized trypsin was also resistant to autolysis, enabling repeated digestions of bovine serum albumin over 40 days and successful peptide identification by LC-MS/MS. Finally, the immobilized trypsin was resistant to proteolysis when exposed to other enzymes (i.e. chymotrypsin), which makes it suitable for use in “real-world” proteomic applications. Overall, the biocatalytic nanofibers with enzyme aggregate coatings proved to be an effective approach for repeated and automated protein digestion in proteomic analyses.
OpenDrift - an open source framework for ocean trajectory modeling

Science.gov (United States)

Dagestad, Knut-Frode; Breivik, Øyvind; Ådlandsvik, Bjørn

2016-04-01

We will present a new, open source tool for modeling the trajectories and fate of particles or substances (Lagrangian Elements) drifting in the ocean, or even in the atmosphere. The software is named OpenDrift, and has been developed at Norwegian Meteorological Institute in cooperation with Institute of Marine Research. OpenDrift is a generic framework written in Python, and is openly available at https://github.com/knutfrode/opendrift/. The framework is modular with respect to three aspects: (1) obtaining input data, (2) the transport/morphological processes, and (3) exporting of results to file. Modularity is achieved through well defined interfaces between components, and use of a consistent vocabulary (CF conventions) for naming of variables. Modular input implies that it is not necessary to preprocess input data (e.g. currents, wind and waves from Eulerian models) to a particular file format. Instead "reader modules" can be written/used to obtain data directly from any original source, including files or through web based protocols (e.g. OPeNDAP/Thredds). Modularity of processes implies that a model developer may focus on the geophysical processes relevant for the application of interest, without needing to consider technical tasks such as reading, reprojecting, and colocating input data, rotation and scaling of vectors and model output. We will show a few example applications of using OpenDrift for predicting drifters, oil spills, and search and rescue objects.
OpenEIS. Developer Guide

Energy Technology Data Exchange (ETDEWEB)

Lutes, Robert G. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Neubauer, Casey C. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Haack, Jereme N. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Carpenter, Brandon J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Monson, Kyle E. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Allwardt, Craig H. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Sharma, Poorva [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Akyol, Bora A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

2015-03-31

The Department of Energy’s (DOE’s) Building Technologies Office (BTO) is supporting the development of an open-source software tool for analyzing building energy and operational data: OpenEIS (open energy information system). This tool addresses the problems of both owners of building data and developers of tools to analyze this data. Building owners and managers have data but lack the tools to analyze it while tool developers lack data in a common format to ease development of reusable data analysis tools. This document is intended for developers of applications and explains the mechanisms for building analysis applications, accessing data, and displaying data using a visualization from the included library. A brief introduction to the visualizations can be used as a jumping off point for developers familiar with JavaScript to produce their own. Several example applications are included which can be used along with this document to implement algorithms for performing energy data analysis.
CAPS OpenACC Compilers: Performance and Portability

CERN Multimedia

CERN. Geneva

2013-01-01

The announcement late 2011 of the new OpenACC directive-based programming standard supported by CAPS, CRAY and PGI compilers has open up the door to more scientific applications that can be ported on many-core systems. Following a porting methodology, this talk will first review the principles of programming with OpenACC and then the advanced features available in the CAPS compilers to further optimize OpenACC applications: library integration, tuning directives with auto-tune mechanisms to build applications adaptive to different GPUs. CAPS compilers use hardware vendors' backends such as NVIDIA CUDA and OpenCL making them the only OpenACC compilers supporting various many-core architectures. About the speaker Stéphane Bihan is co-funder and currently Director of Sales and Marketing at CAPS enterprise. He has held several R&D positions in companies such as ARC international plc in London, Canon Research Center France, ACE compiler experts in Amsterdam and the INRIA r...
Expansion of protein domain repeats.

Directory of Open Access Journals (Sweden)

Asa K Björklund

2006-08-01

Full Text Available Many proteins, especially in eukaryotes, contain tandem repeats of several domains from the same family. These repeats have a variety of binding properties and are involved in protein-protein interactions as well as binding to other ligands such as DNA and RNA. The rapid expansion of protein domain repeats is assumed to have evolved through internal tandem duplications. However, the exact mechanisms behind these tandem duplications are not well-understood. Here, we have studied the evolution, function, protein structure, gene structure, and phylogenetic distribution of domain repeats. For this purpose we have assigned Pfam-A domain families to 24 proteomes with more sensitive domain assignments in the repeat regions. These assignments confirmed previous findings that eukaryotes, and in particular vertebrates, contain a much higher fraction of proteins with repeats compared with prokaryotes. The internal sequence similarity in each protein revealed that the domain repeats are often expanded through duplications of several domains at a time, while the duplication of one domain is less common. Many of the repeats appear to have been duplicated in the middle of the repeat region. This is in strong contrast to the evolution of other proteins that mainly works through additions of single domains at either terminus. Further, we found that some domain families show distinct duplication patterns, e.g., nebulin domains have mainly been expanded with a unit of seven domains at a time, while duplications of other domain families involve varying numbers of domains. Finally, no common mechanism for the expansion of all repeats could be detected. We found that the duplication patterns show no dependence on the size of the domains. Further, repeat expansion in some families can possibly be explained by shuffling of exons. However, exon shuffling could not have created all repeats.
Experimental demonstration of OpenFlow-enabled media ecosystem architecture for high-end applications over metro and core networks.

Science.gov (United States)

Ntofon, Okung-Dike; Channegowda, Mayur P; Efstathiou, Nikolaos; Rashidi Fard, Mehdi; Nejabati, Reza; Hunter, David K; Simeonidou, Dimitra

2013-02-25

In this paper, a novel Software-Defined Networking (SDN) architecture is proposed for high-end Ultra High Definition (UHD) media applications. UHD media applications require huge amounts of bandwidth that can only be met with high-capacity optical networks. In addition, there are requirements for control frameworks capable of delivering effective application performance with efficient network utilization. A novel SDN-based Controller that tightly integrates application-awareness with network control and management is proposed for such applications. An OpenFlow-enabled test-bed demonstrator is reported with performance evaluations of advanced online and offline media- and network-aware schedulers.
The leucine-rich repeat structure.

Science.gov (United States)

Bella, J; Hindle, K L; McEwan, P A; Lovell, S C

2008-08-01

The leucine-rich repeat is a widespread structural motif of 20-30 amino acids with a characteristic repetitive sequence pattern rich in leucines. Leucine-rich repeat domains are built from tandems of two or more repeats and form curved solenoid structures that are particularly suitable for protein-protein interactions. Thousands of protein sequences containing leucine-rich repeats have been identified by automatic annotation methods. Three-dimensional structures of leucine-rich repeat domains determined to date reveal a degree of structural variability that translates into the considerable functional versatility of this protein superfamily. As the essential structural principles become well established, the leucine-rich repeat architecture is emerging as an attractive framework for structural prediction and protein engineering. This review presents an update of the current understanding of leucine-rich repeat structure at the primary, secondary, tertiary and quaternary levels and discusses specific examples from recently determined three-dimensional structures.
Complexity of repeated game model in electric power triopoly

International Nuclear Information System (INIS)

Ma Junhai; Ji Weizhuo

2009-01-01

According to the repeated game model in electric power duopoly, a triopoly outputs game model is presented. On the basis of some hypotheses, the dynamic characters are demonstrated with theoretical analysis and numerical simulations. The results show that the triopoly model is a chaotic system and it is better than the duopoly model in applications.

Open source identity management patterns and practices using OpenAM 10.x

CERN Document Server

Kenning, Waylon

2013-01-01

This is a Packt Mini in a tutorial format that provides multiple examples on Identity Management using OpenAM 10.x.Open Source Identity Management Patterns and Practices Using OpenAM 10.x is great for developers and architects who are new to Identity Management, and who want a brief overview of what's possible and how to quickly implement a prototype. It's assumed that you've had experience with web applications and some knowledge of Apache and Tomcat.
Simple sequence repeat marker loci discovery using SSR primer.

Science.gov (United States)

Robinson, Andrew J; Love, Christopher G; Batley, Jacqueline; Barker, Gary; Edwards, David

2004-06-12

Simple sequence repeats (SSRs) have become important molecular markers for a broad range of applications, such as genome mapping and characterization, phenotype mapping, marker assisted selection of crop plants and a range of molecular ecology and diversity studies. With the increase in the availability of DNA sequence information, an automated process to identify and design PCR primers for amplification of SSR loci would be a useful tool in plant breeding programs. We report an application that integrates SPUTNIK, an SSR repeat finder, with Primer3, a PCR primer design program, into one pipeline tool, SSR Primer. On submission of multiple FASTA formatted sequences, the script screens each sequence for SSRs using SPUTNIK. The results are parsed to Primer3 for locus-specific primer design. The script makes use of a Web-based interface, enabling remote use. This program has been written in PERL and is freely available for non-commercial users by request from the authors. The Web-based version may be accessed at http://hornbill.cspp.latrobe.edu.au/
A Multiprogramming Aware OpenMP Implementation

Directory of Open Access Journals (Sweden)

Vasileios K. Barekas

2003-01-01

Full Text Available In this work, we present an OpenMP implementation suitable for multiprogrammed environments on Intel-based SMP systems. This implementation consists of a runtime system and a resource manager, while we use the NanosCompiler to transform OpenMP-coded applications into code with calls to our runtime system. The resource manager acts as the operating system scheduler for the applications built with our runtime system. It executes a custom made scheduling policy to distribute the available physical processors to the active applications. The runtime system cooperates with the resource manager in order to adapt each application's generated parallelism to the number of processors allocated to it, according to the resource manager scheduling policy. We use the OpenMP version of the NAS Parallel Benchmark suite in order to evaluate the performance of our implementation. In our experiments we compare the performance of our implementation with that of a commercial OpenMP implementation. The comparison proves that our approach performs better both on a dedicated and on a heavily multiprogrammed environment.
Data Science: History repeated? - The heritage of the Free and Open Source GIS community

Science.gov (United States)

Löwe, Peter; Neteler, Markus

2014-05-01

Data Science is described as the process of knowledge extraction from large data sets by means of scientific methods. The discipline draws heavily from techniques and theories from many fields, which are jointly used to furthermore develop information retrieval on structured or unstructured very large datasets. While the term Data Science was already coined in 1960, the current perception of this field places is still in the first section of the hype cycle according to Gartner, being well en route from the technology trigger stage to the peak of inflated expectations. In our view the future development of Data Science could benefit from the analysis of experiences from related evolutionary processes. One predecessor is the area of Geographic Information Systems (GIS). The intrinsic scope of GIS is the integration and storage of spatial information from often heterogeneous sources, data analysis, sharing of reconstructed or aggregated results in visual form or via data transfer. GIS is successfully applied to process and analyse spatially referenced content in a wide and still expanding range of science areas, spanning from human and social sciences like archeology, politics and architecture to environmental and geoscientific applications, even including planetology. This paper presents proven patterns for innovation and organisation derived from the evolution of GIS, which can be ported to Data Science. Within the GIS landscape, three strategic interacting tiers can be denoted: i) Standardisation, ii) applications based on closed-source software, without the option of access to and analysis of the implemented algorithms, and iii) Free and Open Source Software (FOSS) based on freely accessible program code enabling analysis, education and ,improvement by everyone. This paper focuses on patterns gained from the synthesis of three decades of FOSS development. We identified best-practices which evolved from long term FOSS projects, describe the role of community
Irritancy of antiseptics tested by repeated open exposures on the human skin, evaluated by non-invasive methods

NARCIS (Netherlands)

Tupker, RA; Schuur, J; Coenraads, PJ

1997-01-01

The aim of the study was to test the irritancy of 6 antiseptics in an open exposure model. The following agents were tested in their normal use concentrations using open exposures, 2x daily for 4 days in 20 subjects: chlorhexidine 4% (CH), chlorhexidine 0.5% in ethanol 70% (CE), ethanol 70% (ET),
Revisiting the TALE repeat.

Science.gov (United States)

Deng, Dong; Yan, Chuangye; Wu, Jianping; Pan, Xiaojing; Yan, Nieng

2014-04-01

Transcription activator-like (TAL) effectors specifically bind to double stranded (ds) DNA through a central domain of tandem repeats. Each TAL effector (TALE) repeat comprises 33-35 amino acids and recognizes one specific DNA base through a highly variable residue at a fixed position in the repeat. Structural studies have revealed the molecular basis of DNA recognition by TALE repeats. Examination of the overall structure reveals that the basic building block of TALE protein, namely a helical hairpin, is one-helix shifted from the previously defined TALE motif. Here we wish to suggest a structure-based re-demarcation of the TALE repeat which starts with the residues that bind to the DNA backbone phosphate and concludes with the base-recognition hyper-variable residue. This new numbering system is consistent with the α-solenoid superfamily to which TALE belongs, and reflects the structural integrity of TAL effectors. In addition, it confers integral number of TALE repeats that matches the number of bound DNA bases. We then present fifteen crystal structures of engineered dHax3 variants in complex with target DNA molecules, which elucidate the structural basis for the recognition of bases adenine (A) and guanine (G) by reported or uncharacterized TALE codes. Finally, we analyzed the sequence-structure correlation of the amino acid residues within a TALE repeat. The structural analyses reported here may advance the mechanistic understanding of TALE proteins and facilitate the design of TALEN with improved affinity and specificity.
Accurate typing of short tandem repeats from genome-wide sequencing data and its applications.

Science.gov (United States)

Fungtammasan, Arkarachai; Ananda, Guruprasad; Hile, Suzanne E; Su, Marcia Shu-Wei; Sun, Chen; Harris, Robert; Medvedev, Paul; Eckert, Kristin; Makova, Kateryna D

2015-05-01

Short tandem repeats (STRs) are implicated in dozens of human genetic diseases and contribute significantly to genome variation and instability. Yet profiling STRs from short-read sequencing data is challenging because of their high sequencing error rates. Here, we developed STR-FM, short tandem repeat profiling using flank-based mapping, a computational pipeline that can detect the full spectrum of STR alleles from short-read data, can adapt to emerging read-mapping algorithms, and can be applied to heterogeneous genetic samples (e.g., tumors, viruses, and genomes of organelles). We used STR-FM to study STR error rates and patterns in publicly available human and in-house generated ultradeep plasmid sequencing data sets. We discovered that STRs sequenced with a PCR-free protocol have up to ninefold fewer errors than those sequenced with a PCR-containing protocol. We constructed an error correction model for genotyping STRs that can distinguish heterozygous alleles containing STRs with consecutive repeat numbers. Applying our model and pipeline to Illumina sequencing data with 100-bp reads, we could confidently genotype several disease-related long trinucleotide STRs. Utilizing this pipeline, for the first time we determined the genome-wide STR germline mutation rate from a deeply sequenced human pedigree. Additionally, we built a tool that recommends minimal sequencing depth for accurate STR genotyping, depending on repeat length and sequencing read length. The required read depth increases with STR length and is lower for a PCR-free protocol. This suite of tools addresses the pressing challenges surrounding STR genotyping, and thus is of wide interest to researchers investigating disease-related STRs and STR evolution. © 2015 Fungtammasan et al.; Published by Cold Spring Harbor Laboratory Press.
Repeat Guests’ Perception about New Facilities and Increased Price at Padma Hotel Bandung

Directory of Open Access Journals (Sweden)

Reza Ashari Nasution

2012-01-01

Full Text Available In 2009 after one and a half year closed for reconstruction, Malya Hotel Bandung renewed,reopened, rebranded with new name Padma Hotel Bandung. The changes are not only aboutthe name but also the logo, the concept, the grade, and the facilities inside and outside room.This results in higher price to customers. At the opening, Padma Hotel Bandung has focusedtheir marketing promotion on Malya repeat guest . The management concerns about theguests’ perception about the additional price because they will be the main visitors to thehotel. Survey was conducted and the findings reveal that the guests’ perception about theoverall inside and outside room is really good. They agreed that Padma Hotel Bandung hasprovided better facilities compared to Malya Hotel. Some facilities have been identified toinfluence customers’ perception about the overall perception about new facilities. Related tothe increased price, the answer quite varies. The repeat guests stated their doubt about thefairness of the price. Even though, they wanted to come back due to emotional benefitscustomers can get from the new Padma Hotel.Key words: repeat customer, rebranding, customer perception, repurchase intention, servicemarketing
Open Development: Networked Innovations in International ...

International Development Research Centre (IDRC) Digital Library (Canada)

2013-12-12

Dec 12, 2013 ... Open development harnesses this power to create new organizational ... of applications of openness, addressing challenges as well as opportunities. ... research, improving education, and access to scholarly publications. ... Call for new OWSD Fellowships for Early Career Women Scientists now open.
Open source molecular modeling.

Science.gov (United States)

Pirhadi, Somayeh; Sunseri, Jocelyn; Koes, David Ryan

2016-09-01

The success of molecular modeling and computational chemistry efforts are, by definition, dependent on quality software applications. Open source software development provides many advantages to users of modeling applications, not the least of which is that the software is free and completely extendable. In this review we categorize, enumerate, and describe available open source software packages for molecular modeling and computational chemistry. An updated online version of this catalog can be found at https://opensourcemolecularmodeling.github.io. Copyright © 2016 The Author(s). Published by Elsevier Inc. All rights reserved.
All-photonic quantum repeaters

Science.gov (United States)

Azuma, Koji; Tamaki, Kiyoshi; Lo, Hoi-Kwong

2015-01-01

Quantum communication holds promise for unconditionally secure transmission of secret messages and faithful transfer of unknown quantum states. Photons appear to be the medium of choice for quantum communication. Owing to photon losses, robust quantum communication over long lossy channels requires quantum repeaters. It is widely believed that a necessary and highly demanding requirement for quantum repeaters is the existence of matter quantum memories. Here we show that such a requirement is, in fact, unnecessary by introducing the concept of all-photonic quantum repeaters based on flying qubits. In particular, we present a protocol based on photonic cluster-state machine guns and a loss-tolerant measurement equipped with local high-speed active feedforwards. We show that, with such all-photonic quantum repeaters, the communication efficiency scales polynomially with the channel distance. Our result paves a new route towards quantum repeaters with efficient single-photon sources rather than matter quantum memories. PMID:25873153
Personalized reminiscence therapy M-health application for patients living with dementia: Innovating using open source code repository.

Science.gov (United States)

Zhang, Melvyn W B; Ho, Roger C M

2017-01-01

Dementia is known to be an illness which brings forth marked disability amongst the elderly individuals. At times, patients living with dementia do also experience non-cognitive symptoms, and these symptoms include that of hallucinations, delusional beliefs as well as emotional liability, sexualized behaviours and aggression. According to the National Institute of Clinical Excellence (NICE) guidelines, non-pharmacological techniques are typically the first-line option prior to the consideration of adjuvant pharmacological options. Reminiscence and music therapy are thus viable options. Lazar et al. [3] previously performed a systematic review with regards to the utilization of technology to delivery reminiscence based therapy to individuals who are living with dementia and has highlighted that technology does have benefits in the delivery of reminiscence therapy. However, to date, there has been a paucity of M-health innovations in this area. In addition, most of the current innovations are not personalized for each of the person living with Dementia. Prior research has highlighted the utility for open source repository in bioinformatics study. The authors hoped to explain how they managed to tap upon and make use of open source repository in the development of a personalized M-health reminiscence therapy innovation for patients living with dementia. The availability of open source code repository has changed the way healthcare professionals and developers develop smartphone applications today. Conventionally, a long iterative process is needed in the development of native application, mainly because of the need for native programming and coding, especially so if the application needs to have interactive features or features that could be personalized. Such repository enables the rapid and cost effective development of application. Moreover, developers are also able to further innovate, as less time is spend in the iterative process.
Application of the Classification Tree Model in Predicting Learner Dropout Behaviour in Open and Distance Learning

Science.gov (United States)

Yasmin, Dr.

2013-01-01

This paper demonstrates the meaningful application of learning analytics for determining dropout predictors in the context of open and distance learning in a large developing country. The study was conducted at the Directorate of Distance Education at the University of North Bengal, West Bengal, India. This study employed a quantitative research…
An analysis of single amino acid repeats as use case for application specific background models

Directory of Open Access Journals (Sweden)

Sykacek Peter

2011-05-01

Full Text Available Abstract Background Sequence analysis aims to identify biologically relevant signals against a backdrop of functionally meaningless variation. Increasingly, it is recognized that the quality of the background model directly affects the performance of analyses. State-of-the-art approaches rely on classical sequence models that are adapted to the studied dataset. Although performing well in the analysis of globular protein domains, these models break down in regions of stronger compositional bias or low complexity. While these regions are typically filtered, there is increasing anecdotal evidence of functional roles. This motivates an exploration of more complex sequence models and application-specific approaches for the investigation of biased regions. Results Traditional Markov-chains and application-specific regression models are compared using the example of predicting runs of single amino acids, a particularly simple class of biased regions. Cross-fold validation experiments reveal that the alternative regression models capture the multi-variate trends well, despite their low dimensionality and in contrast even to higher-order Markov-predictors. We show how the significance of unusual observations can be computed for such empirical models. The power of a dedicated model in the detection of biologically interesting signals is then demonstrated in an analysis identifying the unexpected enrichment of contiguous leucine-repeats in signal-peptides. Considering different reference sets, we show how the question examined actually defines what constitutes the 'background'. Results can thus be highly sensitive to the choice of appropriate model training sets. Conversely, the choice of reference data determines the questions that can be investigated in an analysis. Conclusions Using a specific case of studying biased regions as an example, we have demonstrated that the construction of application-specific background models is both necessary and
Mastering openFrameworks creative coding demystified

CERN Document Server

Yanc, Chris

2013-01-01

This book gives clear and effective instructions, stuffed with practical examples, to build your own fun, stunning and highly-interactive openFrameworks applications. Each chapter is focused differently and has a new theme to it,This book targets visual artists, designers, programmers and those interested in creative coding by getting started with openFrameworks. This book will help you understand the capabilities of openFrameworks to help you create visually stunning and fully interactive applications. You should have a basic knowledge of object oriented programming, such as C++, Java, Python
Open Search Environments: The Free Alternative to Commercial Search Services

Directory of Open Access Journals (Sweden)

Adrian O'Riordan

2014-06-01

Full Text Available Open search systems present a free and less restricted alternative to commercial search services. This paper explores the space of open search technology looking in particular at the issue of interoperability. A description of current protocols and formats for engineering open search applications is presented. The suitability of these technologies and issues around their adoption and operation are discussed. This open search approach is especially proving a fitting choice in applications involving the harvesting of resources and information integration. Principal among the technological solutions are OpenSearch and SRU. OpenSearch and SRU implement a federated model to enable existing and new search engines and search clients communicate. Applications and instances where Opensearch and SRU can be combined are presented. Other relevant technologies such as OpenURL, Apache Solr, and OAI-PMH are also discussed. The deployment of these freely licensed open standards in digital library applications is now a genuine alternative to commercial or proprietary systems.
Methyldibromoglutaronitrile allergy: relationship between patch test and repeated open application test thresholds

DEFF Research Database (Denmark)

Fischer, L.A.; Johansen, J.D.; Menne, T.

2008-01-01

Background Methyldibromoglutaronitrile (MDBGN) is a preservative, which was approved for use in cosmetics in the mid-1980s. The incidence of allergy to MDBGN rose during the 1990s, but is now decreasing due to regulatory intervention. Experimental studies with other allergens have shown...
State-of-the-practice and lessons learned on implementing open data and open source policies.

Science.gov (United States)

2012-05-01

This report describes the current government, academic, and private sector practices associated with open data and open source application development. These practices are identified; and the potential uses with the ITS Programs Data Capture and M...
Preservice science teachers' experiences with repeated, guided inquiry

Science.gov (United States)

Slack, Amy B.

The purpose of this study was to examine preservice science teachers' experiences with repeated scientific inquiry (SI) activities. The National Science Education Standards (National Research Council, 1996) stress students should understand and possess the abilities to do SI. For students to meet these standards, science teachers must understand and be able to perform SI; however, previous research demonstrated that many teachers have naive understandings in this area. Teacher preparation programs provide an opportunity to facilitate the development of inquiry understandings and abilities. In this study, preservice science teachers had experiences with two inquiry activities that were repeated three times each. The research questions for this study were (a) How do preservice science teachers' describe their experiences with repeated, guided inquiry activities? (b) What are preservice science teachers' understandings and abilities of SI? This study was conducted at a large, urban university in the southeastern United States. The 5 participants had bachelor's degrees in science and were enrolled in a graduate science education methods course. The researcher was one of the course instructors but did not lead the activities. Case study methodology was used. Data was collected from a demographic survey, an open-ended questionnaire with follow-up interviews, the researcher's observations, participants' lab notes, personal interviews, and participants' journals. Data were coded and analyzed through chronological data matrices to identify patterns in participants' experiences. The five domains identified in this study were understandings of SI, abilities to conduct SI, personal feelings about the experience, science content knowledge, and classroom implications. Through analysis of themes identified within each domain, the four conclusions made about these preservice teachers' experiences with SI were that the experience increased their abilities to conduct inquiry
Easing Gently into OpenSRF, Part 2

OpenAIRE

Dan Scott

2010-01-01

The Open Service Request Framework (or OpenSRF, pronounced "open surf") is an inter-application message passing architecture built on XMPP (aka "jabber"). The Evergreen open source library system is built on an OpenSRF architecture to support loosely coupled individual components communicating over an OpenSRF messaging bus. This article introduces OpenSRF, demonstrates how to build OpenSRF services through simple code examples, explains the technical foundations on which OpenSRF is built, and...

Easing Gently into OpenSRF, Part 1

OpenAIRE

Dan Scott

2010-01-01

The Open Service Request Framework (or OpenSRF, pronounced "open surf") is an inter-application message passing architecture built on XMPP (aka "jabber"). The Evergreen open source library system is built on an OpenSRF architecture to support loosely coupled individual components communicating over an OpenSRF messaging bus. This article introduces OpenSRF, demonstrates how to build OpenSRF services through simple code examples, explains the technical foundations on which OpenSRF is built, and...
ELATE: an open-source online application for analysis and visualization of elastic tensors

International Nuclear Information System (INIS)

Gaillac, Romain; Coudert, François-Xavier; Pullumbi, Pluton

2016-01-01

We report on the implementation of a tool for the analysis of second-order elastic stiffness tensors, provided with both an open-source Python module and a standalone online application allowing the visualization of anisotropic mechanical properties. After describing the software features, how we compute the conventional elastic constants and how we represent them graphically, we explain our technical choices for the implementation. In particular, we focus on why a Python module is used to generate the HTML web page with embedded Javascript for dynamical plots. (paper)
RothC simulation of carbon accumulation in soil after repeated application of widely different organic amendments

DEFF Research Database (Denmark)

Peltre, Clément; Christensen, Bent Tolstrup; Dragon, Sophine

2012-01-01

obtained data on changes in soil C stocks after repeated applications of EOM from four long-term experiments (LTEs): Askov K2 (Denmark, 31 yrs), Qualiagro (France, 11 yrs), SERAIL (France, 14 yrs) and Ultuna (Sweden, 52 yrs). The adjustment of the partition coefficients of total organic C in EOM (EOM-TOC......) into the labile, resistant and humified entry pools of RothC (fDPM, fRPM, fHUM, respectively) provided a successful fit to the accumulation of EOM-derived C in the LTE soils. Equations estimating the EOM partition coefficients in the RothC model were based on an indicator (IROC) of the EOM-TOC potentially...... retained in soil. IROC was derived from the C found in the soluble, lignin + cutin-like and cellulose-like Van Soest fractions and the proportion of EOM-TOC mineralized during 3 days of incubation. Using the EOM partition coefficients derived from these laboratory analyses resulted in RothC simulations...
Repeat-aware modeling and correction of short read errors.

Science.gov (United States)

Yang, Xiao; Aluru, Srinivas; Dorman, Karin S

2011-02-15

High-throughput short read sequencing is revolutionizing genomics and systems biology research by enabling cost-effective deep coverage sequencing of genomes and transcriptomes. Error detection and correction are crucial to many short read sequencing applications including de novo genome sequencing, genome resequencing, and digital gene expression analysis. Short read error detection is typically carried out by counting the observed frequencies of kmers in reads and validating those with frequencies exceeding a threshold. In case of genomes with high repeat content, an erroneous kmer may be frequently observed if it has few nucleotide differences with valid kmers with multiple occurrences in the genome. Error detection and correction were mostly applied to genomes with low repeat content and this remains a challenging problem for genomes with high repeat content. We develop a statistical model and a computational method for error detection and correction in the presence of genomic repeats. We propose a method to infer genomic frequencies of kmers from their observed frequencies by analyzing the misread relationships among observed kmers. We also propose a method to estimate the threshold useful for validating kmers whose estimated genomic frequency exceeds the threshold. We demonstrate that superior error detection is achieved using these methods. Furthermore, we break away from the common assumption of uniformly distributed errors within a read, and provide a framework to model position-dependent error occurrence frequencies common to many short read platforms. Lastly, we achieve better error correction in genomes with high repeat content. The software is implemented in C++ and is freely available under GNU GPL3 license and Boost Software V1.0 license at "http://aluru-sun.ece.iastate.edu/doku.php?id = redeem". We introduce a statistical framework to model sequencing errors in next-generation reads, which led to promising results in detecting and correcting errors
Selection of body sway parameters according to their sensitivity and repeatability

Directory of Open Access Journals (Sweden)

Nejc Sarabon

2010-03-01

Full Text Available For the precise evaluation of body balance, static type of tests performed on a force plate are the most commonly used ones. In these tests, body sway characteristics are analyzed based on the model of inverted pendulum and looking at the center of pressure (COP movement in time. Human body engages different strategies to compensate for balance perturbations. For this reason, there is a need to identify parameters which are sensitive to specific balance changes and which enable us to identify balance sub-components. The aim of our study was to investigate intra-visit repeatability and sensibility of the 40 different body sway parameters. Twenty-nine subjects participated in the study. They performed three different balancing tasks of different levels of difficulty, three repetitions each. The hip-width parallel stance and the single leg stance, both with open eyes, were used as ways to compare different balance intensities due to biomechanical changes. Additionally, deprivation of vision was used in the third balance task to study sensitivity to sensory system changes. As shown by intraclass correlation coefficient (ICC, repeatability of cumulative parameters such as COP, maximal amplitude and frequency showed excellent repeatability (ICC>0,85. Other parameters describing sub-dynamics through single repetition proved to have unsatisfying repeatability. Parameters most sensitive to increased intensity of balancing tasks were common COP, COP in medio-lateral and in antero-posterior direction, and maximal amplitues in the same directions. Frequency of oscilations has proved to be sensitive only to deprivation of vision. As shown in our study, cumulative parameters describing the path which the center of pressure makes proved to be the most repeatable and sensitive to detect different increases of balancing tasks enabling future use in balance studies and in clinical practice.
Applicability of transfer tensor method for open quantum system dynamics.

Science.gov (United States)

Gelzinis, Andrius; Rybakovas, Edvardas; Valkunas, Leonas

2017-12-21

Accurate simulations of open quantum system dynamics is a long standing issue in the field of chemical physics. Exact methods exist, but are costly, while perturbative methods are limited in their applicability. Recently a new black-box type method, called transfer tensor method (TTM), was proposed [J. Cerrillo and J. Cao, Phys. Rev. Lett. 112, 110401 (2014)]. It allows one to accurately simulate long time dynamics with a numerical cost of solving a time-convolution master equation, provided many initial system evolution trajectories are obtained from some exact method beforehand. The possible time-savings thus strongly depend on the ratio of total versus initial evolution lengths. In this work, we investigate the parameter regimes where an application of TTM would be most beneficial in terms of computational time. We identify several promising parameter regimes. Although some of them correspond to cases when perturbative theories could be expected to perform well, we find that the accuracy of such approaches depends on system parameters in a more complex way than it is commonly thought. We propose that the TTM should be applied whenever system evolution is expected to be long and accuracy of perturbative methods cannot be ensured or in cases when the system under consideration does not correspond to any single perturbative regime.
The first Neanderthal remains from an open-air Middle Palaeolithic site in the Levant.

Science.gov (United States)

Been, Ella; Hovers, Erella; Ekshtain, Ravid; Malinski-Buller, Ariel; Agha, Nuha; Barash, Alon; Mayer, Daniella E Bar-Yosef; Benazzi, Stefano; Hublin, Jean-Jacques; Levin, Lihi; Greenbaum, Noam; Mitki, Netta; Oxilia, Gregorio; Porat, Naomi; Roskin, Joel; Soudack, Michalle; Yeshurun, Reuven; Shahack-Gross, Ruth; Nir, Nadav; Stahlschmidt, Mareike C; Rak, Yoel; Barzilai, Omry

2017-06-07

The late Middle Palaeolithic (MP) settlement patterns in the Levant included the repeated use of caves and open landscape sites. The fossil record shows that two types of hominins occupied the region during this period-Neandertals and Homo sapiens. Until recently, diagnostic fossil remains were found only at cave sites. Because the two populations in this region left similar material cultural remains, it was impossible to attribute any open-air site to either species. In this study, we present newly discovered fossil remains from intact archaeological layers of the open-air site 'Ein Qashish, in northern Israel. The hominin remains represent three individuals: EQH1, a nondiagnostic skull fragment; EQH2, an upper right third molar (RM 3 ); and EQH3, lower limb bones of a young Neandertal male. EQH2 and EQH3 constitute the first diagnostic anatomical remains of Neandertals at an open-air site in the Levant. The optically stimulated luminescence ages suggest that Neandertals repeatedly visited 'Ein Qashish between 70 and 60 ka. The discovery of Neandertals at open-air sites during the late MP reinforces the view that Neandertals were a resilient population in the Levant shortly before Upper Palaeolithic Homo sapiens populated the region.
Sharing Lessons-Learned on Effective Open Data, Open-Source Practices from OpenAQ, a Global Open Air Quality Community.

Science.gov (United States)

Hasenkopf, C. A.

2017-12-01

Increasingly, open data, open-source projects are unearthing rich datasets and tools, previously impossible for more traditional avenues to generate. These projects are possible, in part, because of the emergence of online collaborative and code-sharing tools, decreasing costs of cloud-based services to fetch, store, and serve data, and increasing interest of individuals to contribute their time and skills to 'open projects.' While such projects have generated palpable enthusiasm from many sectors, many of these projects face uncharted paths for sustainability, visibility, and acceptance. Our project, OpenAQ, is an example of an open-source, open data community that is currently forging its own uncharted path. OpenAQ is an open air quality data platform that aggregates and universally formats government and research-grade air quality data from 50 countries across the world. To date, we make available more than 76 million air quality (PM2.5, PM10, SO2, NO2, O3, CO and black carbon) data points through an open Application Programming Interface (API) and a user-customizable download interface at https://openaq.org. The goal of the platform is to enable an ecosystem of users to advance air pollution efforts from science to policy to the private sector. The platform is also an open-source project (https://github.com/openaq) and has only been made possible through the coding and data contributions of individuals around the world. In our first two years of existence, we have seen requests for data to our API skyrocket to more than 6 million datapoints per month, and use-cases as varied as ingesting data aggregated from our system into real-time models of wildfires to building open-source statistical packages (e.g. ropenaq and py-openaq) on top of the platform to creating public-friendly apps and chatbots. We will share a whirl-wind trip through our evolution and the many lessons learned so far related to platform structure, community engagement, organizational model type
Evolution of the branchiostegal membrane and restricted gill openings in Actinopterygian fishes.

Science.gov (United States)

Farina, Stacy C; Near, Thomas J; Bemis, William E

2015-06-01

A phylogenetic survey is a powerful approach for investigating the evolutionary history of a morphological characteristic that has evolved numerous times without obvious functional implications. Restricted gill openings, an extreme modification of the branchiostegal membrane, are an example of such a characteristic. We examine the evolution of branchiostegal membrane morphology and highlight convergent evolution of restricted gill openings. We surveyed specimens from 433 families of actinopterygians for branchiostegal membrane morphology and measured head and body dimensions. We inferred a relaxed molecular clock phylogeny with branch length estimates based on nine nuclear genes sampled from 285 species that include all major lineages of Actinopterygii. We calculated marginal state reconstructions of four branchiostegal membrane conditions and found that restricted gill openings have evolved independently in at least 11 major actinopterygian clades, and the total number of independent origins of the trait is likely much higher. A principal component analysis revealed that fishes with restricted gill openings occupy a larger morphospace, as defined by our linear measurements, than do fishes with nonrestricted openings. We used a decision tree analysis of ecological data to determine if restricted gill openings are linked to certain environments. We found that fishes with restricted gill openings repeatedly occur under a variety of ecological conditions, although they are rare in open-ocean pelagic environments. We also tested seven ratios for their utility in distinguishing between fishes with and without restricted gill openings, and we propose a simple metric for quantifying restricted gill openings (RGO), defined as a ratio of the distance from the ventral midline to the gill opening relative to half the circumference of the head. Functional explanations for this specialized morphology likely differ within each clade, but its repeated evolution indicates a need
Leaf-GP: an open and automated software application for measuring growth phenotypes for arabidopsis and wheat.

Science.gov (United States)

Zhou, Ji; Applegate, Christopher; Alonso, Albor Dobon; Reynolds, Daniel; Orford, Simon; Mackiewicz, Michal; Griffiths, Simon; Penfield, Steven; Pullen, Nick

2017-01-01

Plants demonstrate dynamic growth phenotypes that are determined by genetic and environmental factors. Phenotypic analysis of growth features over time is a key approach to understand how plants interact with environmental change as well as respond to different treatments. Although the importance of measuring dynamic growth traits is widely recognised, available open software tools are limited in terms of batch image processing, multiple traits analyses, software usability and cross-referencing results between experiments, making automated phenotypic analysis problematic. Here, we present Leaf-GP (Growth Phenotypes), an easy-to-use and open software application that can be executed on different computing platforms. To facilitate diverse scientific communities, we provide three software versions, including a graphic user interface (GUI) for personal computer (PC) users, a command-line interface for high-performance computer (HPC) users, and a well-commented interactive Jupyter Notebook (also known as the iPython Notebook) for computational biologists and computer scientists. The software is capable of extracting multiple growth traits automatically from large image datasets. We have utilised it in Arabidopsis thaliana and wheat ( Triticum aestivum ) growth studies at the Norwich Research Park (NRP, UK). By quantifying a number of growth phenotypes over time, we have identified diverse plant growth patterns between different genotypes under several experimental conditions. As Leaf-GP has been evaluated with noisy image series acquired by different imaging devices (e.g. smartphones and digital cameras) and still produced reliable biological outputs, we therefore believe that our automated analysis workflow and customised computer vision based feature extraction software implementation can facilitate a broader plant research community for their growth and development studies. Furthermore, because we implemented Leaf-GP based on open Python-based computer vision, image
Repeated transsphenoidal surgery for resection of pituitary adenoma.

Science.gov (United States)

Wang, Shousen; Xiao, Deyong; Wang, Rumi; Wei, Liangfeng; Hong, Jingfang

2015-03-01

To investigate the surgical strategy of repeated microscopic transsphenoidal surgery (TSS) for treatment of pituitary adenoma, surgical techniques and treatment outcomes for 29 patients with pituitary adenoma were reviewed and analyzed. There were 17 patients who underwent TSS 18 times and 12 patients who underwent TSS 13 times. The interval between each TSS ranged from 3 months to 18 years, with a median time of 4 years. The tumor height was 15 to 45 mm on the last surgery. Among the 29 patients, 16 patients underwent total tumor resection, 11 patients underwent subtotal resection, and 2 patients underwent partial resection. Cerebrospinal fluid leak occurred in 10 patients. Among 24 patients who were followed up effectively, 1 patient developed abducens paralysis after surgery, 1 patient had chronic diabetes insipidus, and 1 patient received steroid-dependent alternative treatment. The repeated TSS may present satisfied outcomes in experienced hands. The upper edge of the posterior choanae should be identified to ensure the right orientation. The openings of the anterior wall of the sphenoid sinus and the sellar floor should be appropriately expanded to improve tumor exposure. The artificial materials should be identified and removed carefully. Intraoperative cerebrospinal fluid leakage should be managed well.
Recursion Of Binary Space As A Foundation Of Repeatable Programs

Directory of Open Access Journals (Sweden)

Jeremy Horne

2006-10-01

Full Text Available Every computation, including recursion, is based on natural philosophy. Our world may be expressed in terms of a binary logical space that contains functions that act simultaneously as objects and processes (operands and operators. This paper presents an outline of the results of research about that space and suggests routes for further inquiry. Binary logical space is generated sequentially from an origin in a standard coordinate system. At least one method exists to show that each of the resulting 16 functions repeats itself by repeatedly forward-feeding outputs of a function operating over two others as new operands of the original function until the original function appears as an output, thus behaving as an apparent homeostatic automaton. As any space of any dimension is composed of one or more of these functions, so the space is recursive, as well. Semantics gives meaning to recursive structures, computer programs and fundamental constituents of our universe being two examples. Such thoughts open inquiry into larger philosophical issues as free will and determinism.
[open quotes]Cryptic[close quotes] repeating triplets of purines and pyrimidines (cRRY(i)) are frequent and polymorphic: Analysis of coding cRRY(i) in the proopiomelanocortin (POMC) and TATA-binding protein (TBP) genes

Energy Technology Data Exchange (ETDEWEB)

Gostout, B.; Qiang Liu; Sommer, S.S. (Mayo Clinic/Foundation, Rochester, MN (United States))

1993-06-01

Triplets of the form of purine, purine, pyrimidine (RRY(i)) are enhanced in frequency in the genomes of primates, rodents, and bacteria. Some RRY(i) are [open quotes]cryptic[close quotes] repeats (cRRY(i)) in which no one tandem run of a trinucleotide predominates. A search of human GenBank sequence revealed that the sequences of cRRY(i) are highly nonrandom. Three randomly chosen human cRRY(i) were sequenced in search of polymorphic alleles. Multiple polymorphic alleles were found in cRRY(i) in the coding regions of the genes for proopiomelanocortin (POMC) and TATA-binding protein (TBP). The highly polymorphic TBP cRRY(i) was characterized in detail. Direct sequencing of 157 unrelated human alleles demonstrated the presence of 20 different alleles which resulted in 29--40 consecutive glutamines in the amino-terminal region of TBP. These alleles are differently distributed among the races. PCR was used to screen 1,846 additional alleles in order to characterize more fully the range of variation in the population. Three additional alleles were discovered, but there was no example of a substantial sequence amplification as is seen in the repeat sequences associated with X-linked spinal and bulbar muscular atrophy, myotonic dystrophy, or the fragile-X syndrome. The structure of the TBP cRRY(i) is conserved in the five monkey species examined. In the chimpanzee, examination of four individuals revealed that the cRRY(i) was highly polymorphic, but the pattern of polymorphism differed from that in humans. The TBP cRRY(i) displays both similarities with and differences from the previously described RRY(i) in the coding sequence of the androgen receptor. The data suggest how simple tandem repeats could evolve from cryptic repeats. 18 refs., 3 figs., 6 tabs.
OpenCL programming guide

CERN Document Server

Munshi, Aaftab; Mattson, Timothy G; Fung, James; Ginsburg, Dan

2011-01-01

Using the new OpenCL (Open Computing Language) standard, you can write applications that access all available programming resources: CPUs, GPUs, and other processors such as DSPs and the Cell/B.E. processor. Already implemented by Apple, AMD, Intel, IBM, NVIDIA, and other leaders, OpenCL has outstanding potential for PCs, servers, handheld/embedded devices, high performance computing, and even cloud systems. This is the first comprehensive, authoritative, and practical guide to OpenCL 1.1 specifically for working developers and software architects. Written by five leading OpenCL authorities, OpenCL Programming Guide covers the entire specification. It reviews key use cases, shows how OpenCL can express a wide range of parallel algorithms, and offers complete reference material on both the API and OpenCL C programming language. Through complete case studies and downloadable code examples, the authors show how to write complex parallel programs that decompose workloads across many different devices. They...
78 FR 65594 - Vehicular Repeaters

Science.gov (United States)

2013-11-01

... coordinators estimate the effect on coordination fees? Does the supposed benefit that mobile repeater stations... allow the licensing and operation of vehicular repeater systems and other mobile repeaters by public... email: [email protected] or phone: 202-418- 0530 or TTY: 202-418-0432. For detailed instructions for...
Highly sensitive detection of individual HEAT and ARM repeats with HHpred and COACH.

Science.gov (United States)

Kippert, Fred; Gerloff, Dietlind L

2009-09-24

HEAT and ARM repeats occur in a large number of eukaryotic proteins. As these repeats are often highly diverged, the prediction of HEAT or ARM domains can be challenging. Except for the most clear-cut cases, identification at the individual repeat level is indispensable, in particular for determining domain boundaries. However, methods using single sequence queries do not have the sensitivity required to deal with more divergent repeats and, when applied to proteins with known structures, in some cases failed to detect a single repeat. Testing algorithms which use multiple sequence alignments as queries, we found two of them, HHpred and COACH, to detect HEAT and ARM repeats with greatly enhanced sensitivity. Calibration against experimentally determined structures suggests the use of three score classes with increasing confidence in the prediction, and prediction thresholds for each method. When we applied a new protocol using both HHpred and COACH to these structures, it detected 82% of HEAT repeats and 90% of ARM repeats, with the minimum for a given protein of 57% for HEAT repeats and 60% for ARM repeats. Application to bona fide HEAT and ARM proteins or domains indicated that similar numbers can be expected for the full complement of HEAT/ARM proteins. A systematic screen of the Protein Data Bank for false positive hits revealed their number to be low, in particular for ARM repeats. Double false positive hits for a given protein were rare for HEAT and not at all observed for ARM repeats. In combination with fold prediction and consistency checking (multiple sequence alignments, secondary structure prediction, and position analysis), repeat prediction with the new HHpred/COACH protocol dramatically improves prediction in the twilight zone of fold prediction methods, as well as the delineation of HEAT/ARM domain boundaries. A protocol is presented for the identification of individual HEAT or ARM repeats which is straightforward to implement. It provides high
Tevatron serial data repeater system

International Nuclear Information System (INIS)

Ducar, R.J.

1981-01-01

A ten megabit per second serial data repeater system has been developed for the 6.28km Tevatron accelerator. The repeaters are positioned at each of the thirty service buildings and accommodate control and abort system communications as well as distribution of the Tevatron time and energy clocks. The repeaters are transparent to the particular protocol of the transmissions. Serial data are encoded locally as unipolar two volt signals employing the self-clocking Manchester Bi-Phase code. The repeaters modulate the local signals to low-power bursts of 50 MHz rf carrier for the 260m transmission between service buildings. The repeaters also demodulate the transmission and restructure the data for local utilization. The employment of frequency discrimination techniques yields high immunity to the characteristic noise spectrum
SSRscanner: a program for reporting distribution and exact location of simple sequence repeats.

Science.gov (United States)

Anwar, Tamanna; Khan, Asad U

2006-02-20

Simple sequence repeats (SSRs) have become important molecular markers for a broad range of applications, such as genome mapping and characterization, phenotype mapping, marker assisted selection of crop plants and a range of molecular ecology and diversity studies. These repeated DNA sequences are found in both prokaryotes and eukaryotes. They are distributed almost at random throughout the genome, ranging from mononucleotide to trinucleotide repeats. They are also found at longer lengths (> 6 repeating units) of tracts. Most of the computer programs that find SSRs do not report its exact position. A computer program SSRscanner was written to find out distribution, frequency and exact location of each SSR in the genome. SSRscanner is user friendly. It can search repeats of any length and produce outputs with their exact position on chromosome and their frequency of occurrence in the sequence. This program has been written in PERL and is freely available for non-commercial users by request from the authors. Please contact the authors by E-mail: huzzi99@hotmail.com.
Linear Synchronous Motor Repeatability Tests

International Nuclear Information System (INIS)

Ward, C.R.

2002-01-01

A cart system using linear synchronous motors was being considered for the Plutonium Immobilization Plant (PIP). One of the applications in the PIP was the movement of a stack of furnace trays, filled with the waste form (pucks) from a stacking/unstacking station to several bottom loaded furnaces. A system was ordered to perform this function in the PIP Ceramic Prototype Test Facility (CPTF). This system was installed and started up in SRTC prior to being installed in the CPTF. The PIP was suspended and then canceled after the linear synchronous motor system was started up. This system was used to determine repeatability of a linear synchronous motor cart system for the Modern Pit Facility
IEEE 802.3 Fiber Optic Inter-Repeater Link

Science.gov (United States)

Tarrant, Peter J.

1987-01-01

This paper describes the implementation of a fiber optic inter-repeater link (FOIRL), used for connecting two remote copper segments of an IEEE 802.3 local area network. The rationale for the design, the signalling used and the collision detection mechanism is discussed. The evolution of the draft international standard for the FOIRL and the concurrence amongst various manufacturers is also presented. Finally some examples of typical applications, highlighting the ease of installation, are given.

Repeat Customer Success in Extension

Science.gov (United States)

Bess, Melissa M.; Traub, Sarah M.

2013-01-01

Four multi-session research-based programs were offered by two Extension specialist in one rural Missouri county. Eleven participants who came to multiple Extension programs could be called "repeat customers." Based on the total number of participants for all four programs, 25% could be deemed as repeat customers. Repeat customers had…
Film repeats in radiology department

International Nuclear Information System (INIS)

Suwan, A. Z.; Al-Shakharah, A. I

1997-01-01

During a one year period, 4910 radiographs of 55780 films were repeated. The objective of our study was to analyse and to classify the causes in order to minimize the repeats, cut the expenses and to provide optimal radiographs for accurate diagnosis. Analysis of the different factors revealed that, 43.6% of film repeats in our service were due to faults in exposure factors, centering comprises 15.9% of the repeats, while too much collimation was responsible for 7.6% of these repeats. All of which can be decreased by awareness and programmed training of technicians. Film blurring caused by patient motion was also responsible for 4.9% for radiographs reexamination, which can be minimized by detailed explanation to the patient and providing the necessary privacy. Fogging of X-Ray films by improper storage or inadequate handling or processing faults were responsible for 14.5% in repeats in our study. Methods and criteria for proper storage and handling of films were discussed. Recommendation for using modern day-light and laser processor has been high lighted. Artefacts are noticeably high in our cases, due to spinal dresses and frequent usage of precious metals for c osmotic purposes in this part of the world. The repeated films comprise 8.8% of all films We conclude that, the main factor responsible for repeats of up to 81.6% of cases was the technologists, thus emphasizing the importance of adequate training of the technologists. (authors). 15 refs., 9 figs., 1 table
Isolation and characterization of repeat elements of the oak genome and their application in population analysis

International Nuclear Information System (INIS)

Fluch, S.; Burg, K.

1998-01-01

Four minisatellite sequence elements have been identified and isolated from the genome of the oak species Quercus petraea and Quercus robur. Minisatellites 1 and 2 are putative members of repeat families, while minisatellites 3 and 4 show repeat length variation among individuals of test populations. A 590 base pair (bp) long element has also been identified which reveals individual-specific autoradiographic patterns when used as probe in Southern hybridisations of genomic oak DNA. (author)
Repeat migration and disappointment.

Science.gov (United States)

Grant, E K; Vanderkamp, J

1986-01-01

This article investigates the determinants of repeat migration among the 44 regions of Canada, using information from a large micro-database which spans the period 1968 to 1971. The explanation of repeat migration probabilities is a difficult task, and this attempt is only partly successful. May of the explanatory variables are not significant, and the overall explanatory power of the equations is not high. In the area of personal characteristics, the variables related to age, sex, and marital status are generally significant and with expected signs. The distance variable has a strongly positive effect on onward move probabilities. Variables related to prior migration experience have an important impact that differs between return and onward probabilities. In particular, the occurrence of prior moves has a striking effect on the probability of onward migration. The variable representing disappointment, or relative success of the initial move, plays a significant role in explaining repeat migration probabilities. The disappointment variable represents the ratio of actural versus expected wage income in the year after the initial move, and its effect on both repeat migration probabilities is always negative and almost always highly significant. The repeat probabilities diminish after a year's stay in the destination region, but disappointment in the most recent year still has a bearing on the delayed repeat probabilities. While the quantitative impact of the disappointment variable is not large, it is difficult to draw comparisons since similar estimates are not available elsewhere.
An Extension to Deng's Entropy in the Open World Assumption with an Application in Sensor Data Fusion.

Science.gov (United States)

Tang, Yongchuan; Zhou, Deyun; Chan, Felix T S

2018-06-11

Quantification of uncertain degree in the Dempster-Shafer evidence theory (DST) framework with belief entropy is still an open issue, even a blank field for the open world assumption. Currently, the existed uncertainty measures in the DST framework are limited to the closed world where the frame of discernment (FOD) is assumed to be complete. To address this issue, this paper focuses on extending a belief entropy to the open world by considering the uncertain information represented as the FOD and the nonzero mass function of the empty set simultaneously. An extension to Deng’s entropy in the open world assumption (EDEOW) is proposed as a generalization of the Deng’s entropy and it can be degenerated to the Deng entropy in the closed world wherever necessary. In order to test the reasonability and effectiveness of the extended belief entropy, an EDEOW-based information fusion approach is proposed and applied to sensor data fusion under uncertainty circumstance. The experimental results verify the usefulness and applicability of the extended measure as well as the modified sensor data fusion method. In addition, a few open issues still exist in the current work: the necessary properties for a belief entropy in the open world assumption, whether there exists a belief entropy that satisfies all the existed properties, and what is the most proper fusion frame for sensor data fusion under uncertainty.
Design of a Command-Triggered Plasma Opening Switch for Terawatt Applications

International Nuclear Information System (INIS)

Savage, Mark E.; Mendel, C.W.; Seidel, David B.

1999-01-01

Inductive energy storage systems can have high energy density, lending to smaller, less expensive systems. The crucial element of an inductive energy storage system is the opening switch. This switch must conduct current while energy is stored in an inductor, then open quickly to transfer this energy to a load. Plasma can perform this function. The Plasma Opening Switch (POS) has been studied for more than two decades. Success with the conventional plasma opening switch has been limited. A system designed to significantly improve the performance of vacuum opening switches is described in this paper. The gap cleared of plasma is a rough figure-of-merit for vacuum opening switches. Typical opened gaps of 3 mm are reported for conventional switches. The goal for the system described in this paper is more than 3 cm. To achieve this, the command-triggered POS adds an active opening mechanism, which allows complete separation of conduction and opening. This separation is advantageous because of the widely different time scales of conduction and opening. The detrimental process of magnetic field penetration into the plasma during conduction is less important in this switch. The opening mechanism duration is much shorter than the conduction time, so penetration during opening is insignificant. Opening is accomplished with a fast magnetic field that pushes plasma out of the switch region. Plasma must be removed from the switch region to allow high voltage. This paper describes some processes important during conduction and opening, and show calculations on the trigger requirements. The design of the switch is shown. This system is designed to demonstrate both improved performance and nanosecond output jitter at levels greater than one terawatt. An amplification mechanism is described which reduces the trigger energy. Particle-in-cell simulations of the system are also shown
Open-source, small-animal magnetic resonance-guided focused ultrasound system.

Science.gov (United States)

Poorman, Megan E; Chaplin, Vandiver L; Wilkens, Ken; Dockery, Mary D; Giorgio, Todd D; Grissom, William A; Caskey, Charles F

2016-01-01

MR-guided focused ultrasound or high-intensity focused ultrasound (MRgFUS/MRgHIFU) is a non-invasive therapeutic modality with many potential applications in areas such as cancer therapy, drug delivery, and blood-brain barrier opening. However, the large financial costs involved in developing preclinical MRgFUS systems represent a barrier to research groups interested in developing new techniques and applications. We aim to mitigate these challenges by detailing a validated, open-source preclinical MRgFUS system capable of delivering thermal and mechanical FUS in a quantifiable and repeatable manner under real-time MRI guidance. A hardware and software package was developed that includes closed-loop feedback controlled thermometry code and CAD drawings for a therapy table designed for a preclinical MRI scanner. For thermal treatments, the modular software uses a proportional integral derivative controller to maintain a precise focal temperature rise in the target given input from MR phase images obtained concurrently. The software computes the required voltage output and transmits it to a FUS transducer that is embedded in the delivery table within the magnet bore. The delivery table holds the FUS transducer, a small animal and its monitoring equipment, and a transmit/receive RF coil. The transducer is coupled to the animal via a water bath and is translatable in two dimensions from outside the magnet. The transducer is driven by a waveform generator and amplifier controlled by real-time software in Matlab. MR acoustic radiation force imaging is also implemented to confirm the position of the focus for mechanical and thermal treatments. The system was validated in tissue-mimicking phantoms and in vivo during murine tumor hyperthermia treatments. Sonications were successfully controlled over a range of temperatures and thermal doses for up to 20 min with minimal temperature overshoot. MR thermometry was validated with an optical temperature probe, and focus
76 FR 74721 - Preserving the Open Internet

Science.gov (United States)

2011-12-01

...; Report No. 2936] Preserving the Open Internet AGENCY: Federal Communications Commission. ACTION: Final... for broadband service to preserve and reinforce Internet freedom and openness. DATES: Oppositions to... applicability. Subject: In the Matter of Preserving the Open Internet, Broadband Industry Practices, published...
OpenNI cookbook

CERN Document Server

Falahati, Soroush

2013-01-01

This is a Cookbook with plenty of practical recipes enriched with explained code and relevant screenshots to ease your learning curve. If you are a beginner or a professional in NIUI and want to write serious applications or games, then this book is for you. Even OpenNI 1 and OpenNI 1.x programmers who want to move to new versions of OpenNI can use this book as a starting point. This book uses C++ as the primary language but there are some examples in C# and Java too, so you need to have about a basic working knowledge of C or C++ for most cases.
detectIR: a novel program for detecting perfect and imperfect inverted repeats using complex numbers and vector calculation.

Science.gov (United States)

Ye, Congting; Ji, Guoli; Li, Lei; Liang, Chun

2014-01-01

Inverted repeats are present in abundance in both prokaryotic and eukaryotic genomes and can form DNA secondary structures--hairpins and cruciforms that are involved in many important biological processes. Bioinformatics tools for efficient and accurate detection of inverted repeats are desirable, because existing tools are often less accurate and time consuming, sometimes incapable of dealing with genome-scale input data. Here, we present a MATLAB-based program called detectIR for the perfect and imperfect inverted repeat detection that utilizes complex numbers and vector calculation and allows genome-scale data inputs. A novel algorithm is adopted in detectIR to convert the conventional sequence string comparison in inverted repeat detection into vector calculation of complex numbers, allowing non-complementary pairs (mismatches) in the pairing stem and a non-palindromic spacer (loop or gaps) in the middle of inverted repeats. Compared with existing popular tools, our program performs with significantly higher accuracy and efficiency. Using genome sequence data from HIV-1, Arabidopsis thaliana, Homo sapiens and Zea mays for comparison, detectIR can find lots of inverted repeats missed by existing tools whose outputs often contain many invalid cases. detectIR is open source and its source code is freely available at: https://sourceforge.net/projects/detectir.
A Wideband Dual-Polarized Antenna Using Planar Quasi-Open-Sleeve Dipoles for Base Station Applications

Directory of Open Access Journals (Sweden)

Guan-xi Zhang

2015-01-01

Full Text Available A wideband dual-polarized antenna for WLAN, WiMAX, and LTE base station applications is presented in this paper. The proposed antenna consists of two pairs of orthogonal planar quasi-open-sleeve dipoles along the centerlines, a balanced feeding structure and a square ground plane. The planar quasi-open-sleeve dipole comprises a pair of bowtie-shaped planar dipoles with two parallel curve parasitic elements. The introduced parallel curve parasitic elements change the path of the current of the original bowtie-shaped planar dipoles at high frequencies and hence wideband characteristic is achieved. Two pairs of the planar quasi-open-sleeve dipoles placed orthogonally further broaden the bandwidth of the antenna with dual-polarization characteristics. The proposed antenna achieves a 10-dB return loss bandwidth from 2.32 to 4.03 GHz (53.9% bandwidth using the planar quasi-open-sleeve dipole structures. The isolation between the two ports remains more than 32 dB in the whole bandwidth. Measured results show that the proposed antenna keeps the cross-polarization under −33 dB and the front-to-back ratio better than 15 dB in the operating band. The antenna has an area of 0.3λ × 0.3λ at 2.32 GHz making it easy to be extended to an array element.
Basic Structure of Some Classes of Neutrosophic Crisp Nearly Open Sets & Possible Application to GIS Topology

Directory of Open Access Journals (Sweden)

A. A. Salama

2015-01-01

Full Text Available Since the world is full of indeterminacy, the neutrosophics found their place into contemporary research. The fundamental concepts of neutrosophic set, introduced by Smarandache and Salama et al. In Geographical information systems (GIS there is a need to model spatial regions with indeterminate boundary and under indeterminacy. In this paper the structure of some classes of neutrosophic crisp nearly open sets are investigated and some applications are given. Finally we generalize the crisp topological and intuitioistic studies to the notion of neutrosophic crisp set. Possible applications to GIS topological rules are touched upon.
A comparison of native GPU computing versus OpenACC for implementing flow-routing algorithms in hydrological applications

Science.gov (United States)

Rueda, Antonio J.; Noguera, José M.; Luque, Adrián

2016-02-01

In recent years GPU computing has gained wide acceptance as a simple low-cost solution for speeding up computationally expensive processing in many scientific and engineering applications. However, in most cases accelerating a traditional CPU implementation for a GPU is a non-trivial task that requires a thorough refactorization of the code and specific optimizations that depend on the architecture of the device. OpenACC is a promising technology that aims at reducing the effort required to accelerate C/C++/Fortran code on an attached multicore device. Virtually with this technology the CPU code only has to be augmented with a few compiler directives to identify the areas to be accelerated and the way in which data has to be moved between the CPU and GPU. Its potential benefits are multiple: better code readability, less development time, lower risk of errors and less dependency on the underlying architecture and future evolution of the GPU technology. Our aim with this work is to evaluate the pros and cons of using OpenACC against native GPU implementations in computationally expensive hydrological applications, using the classic D8 algorithm of O'Callaghan and Mark for river network extraction as case-study. We implemented the flow accumulation step of this algorithm in CPU, using OpenACC and two different CUDA versions, comparing the length and complexity of the code and its performance with different datasets. We advance that although OpenACC can not match the performance of a CUDA optimized implementation (×3.5 slower in average), it provides a significant performance improvement against a CPU implementation (×2-6) with by far a simpler code and less implementation effort.
Developing Pre-Algebraic Thinking in Generalizing Repeating Pattern Using SOLO Model

Science.gov (United States)

Lian, Lim Hooi; Yew, Wun Thiam

2011-01-01

In this paper, researchers discussed the application of the generalization perspective in helping the primary school pupils to develop their pre-algebraic thinking in generalizing repeating pattern. There are two main stages of the generalization perspective had been adapted, namely investigating and generalizing the pattern. Since the Biggs and…
Hypervelocity Impact Performance of Open Cell Foam Core Sandwich Panel Structures

Science.gov (United States)

Ryan, S.; Ordonez, E.; Christiansen, E. L.; Lear, D. M.

2010-01-01

Open cell metallic foam core sandwich panel structures are of interest for application in spacecraft micrometeoroid and orbital debris shields due to their novel form and advantageous structural and thermal performance. Repeated shocking as a result of secondary impacts upon individual foam ligaments during the penetration process acts to raise the thermal state of impacting projectiles ; resulting in fragmentation, melting, and vaporization at lower velocities than with traditional shielding configurations (e.g. Whipple shield). In order to characterize the protective capability of these structures, an extensive experimental campaign was performed by the Johnson Space Center Hypervelocity Impact Technology Facility, the results of which are reported in this paper. Although not capable of competing against the protection levels achievable with leading heavy shields in use on modern high-risk vehicles (i.e. International Space Station modules), metallic foam core sandwich panels are shown to provide a substantial improvement over comparable structural panels and traditional low weight shielding alternatives such as honeycomb sandwich panels and metallic Whipple shields. A ballistic limit equation, generalized in terms of panel geometry, is derived and presented in a form suitable for application in risk assessment codes.
Application of 3D Laser Scanning Technology in Inspection and Dynamic Reserves Detection of Open-Pit Mine

Science.gov (United States)

Hu, Zhumin; Wei, Shiyu; Jiang, Jun

2017-10-01

The traditional open-pit mine mining rights verification and dynamic reserve detection means rely on the total station and RTK to collect the results of the turning point coordinates of mining surface contours. It resulted in obtaining the results of low precision and large error in the means that is limited by the traditional measurement equipment accuracy and measurement methods. The three-dimensional scanning technology can obtain the three-dimensional coordinate data of the surface of the measured object in a large area at high resolution. This paper expounds the commonly used application of 3D scanning technology in the inspection and dynamic reserve detection of open mine mining rights.
OpenLMD, multimodal monitoring and control of LMD processing

Science.gov (United States)

Rodríguez-Araújo, Jorge; García-Díaz, Antón

2017-02-01

This paper presents OpenLMD, a novel open-source solution for on-line multimodal monitoring of Laser Metal Deposition (LMD). The solution is also applicable to a wider range of laser-based applications that require on-line control (e.g. laser welding). OpenLMD is a middleware that enables the orchestration and virtualization of a LMD robot cell, using several open-source frameworks (e.g. ROS, OpenCV, PCL). The solution also allows reconfiguration by easy integration of multiple sensors and processing equipment. As a result, OpenLMD delivers significant advantages over existing monitoring and control approaches, such as improved scalability, and multimodal monitoring and data sharing capabilities.
Network innovation through OpenFlow and SDN principles and design

CERN Document Server

Hu, Fei

2014-01-01

FUNDAMENTALSSDN /OpenFlow: Concepts and Applications; Ashley Gerrity and Fei HuAn OpenFlow Network Design Cycle; Pedro A. Aranda Gutiřrez and Diego R. LopezDESIGNIP Source Address Validation Solution with OpenFlow Extension and OpenRouter; Jun BiLanguage and Programming in SDN /OpenFlow; Muhammad Farooq and Fei HuControl and Management Software for SDNs; Natalia Castro Fernandes and Luiz Claudio Schara MagalhêsController Architecture and Performance in Software-Defined Networks; Ting Zhang and Fei HuMobile Applications on Global Clouds Using OpenFlow and Software-Defined Networking; Subharth
Practical open source software for libraries

CERN Document Server

Engard, Nicole

2010-01-01

Open source refers to an application whose source code is made available for use or modification as users see fit. This means libraries gain more flexibility and freedom than with software purchased with license restrictions. Both the open source community and the library world live by the same rules and principles. Practical Open Source Software for Libraries explains the facts and dispels myths about open source. Chapters introduce librarians to open source and what it means for libraries. The reader is provided with links to a toolbox full of freely available open source products to use in
Diffusion-weighted (DW) MRI in lung cancers. ADC test-retest repeatability

Energy Technology Data Exchange (ETDEWEB)

Weller, Alex; Papoutsaki, Marianthi Vasiliki; Blackledge, Matthew; DeSouza, Nandita M. [Institute of Cancer Research and Royal Marsden NHS Foundation Trust, CRUK Cancer Imaging Centre, Surrey (United Kingdom); Waterton, John C. [University of Manchester, Manchester (United Kingdom); Chiti, Arturo [Humanitas University, Milan (Italy); Stroobants, Sigrid [Universiteit Antwerpen, Antwerpen (Belgium); Kuijer, Joost [Vrije Universiteit Medisch Centrum, Amsterdam (Netherlands); Morgan, Veronica [Royal Marsden NHS Foundation Trust, Department of Medicine, London (United Kingdom)

2017-11-15

To determine the test-retest repeatability of Apparent Diffusion Coefficient (ADC) measurements across institutions and MRI vendors, plus investigate the effect of post-processing methodology on measurement precision. Thirty malignant lung lesions >2 cm in size (23 patients) were scanned on two occasions, using echo-planar-Diffusion-Weighted (DW)-MRI to derive whole-tumour ADC (b = 100, 500 and 800 s/mm{sup -2}). Scanning was performed at 4 institutions (3 MRI vendors). Whole-tumour volumes-of-interest were copied from first visit onto second visit images and from one post-processing platform to an open-source platform, to assess ADC repeatability and cross-platform reproducibility. Whole-tumour ADC values ranged from 0.66-1.94x10{sup -3} mm{sup 2}s{sup -1} (mean = 1.14). Within-patient coefficient-of-variation (wCV) was 7.1% (95% CI 5.7-9.6%), limits-of-agreement (LoA) -18.0 to 21.9%. Lesions >3 cm had improved repeatability: wCV 3.9% (95% CI 2.9-5.9%); and LoA -10.2 to 11.4%. Variability for lesions <3 cm was 2.46 times higher. ADC reproducibility across different post-processing platforms was excellent: Pearson's R{sup 2} = 0.99; CoV 2.8% (95% CI 2.3-3.4%); and LoA -7.4 to 8.0%. A free-breathing DW-MRI protocol for imaging malignant lung tumours achieved satisfactory within-patient repeatability and was robust to changes in post-processing software, justifying its use in multi-centre trials. For response evaluation in individual patients, a change in ADC >21.9% will reflect treatment-related change. (orig.)

Repeatability of visual acuity measurement.

Science.gov (United States)

Raasch, T W; Bailey, I L; Bullimore, M A

1998-05-01

This study investigates features of visual acuity chart design and acuity testing scoring methods which affect the validity and repeatability of visual acuity measurements. Visual acuity was measured using the Sloan and British Standard letter series, and Landolt rings. Identifiability of the different letters as a function of size was estimated, and expressed in the form of frequency-of-seeing curves. These functions were then used to simulate acuity measurements with a variety of chart designs and scoring criteria. Systematic relationships exist between chart design parameters and acuity score, and acuity score repeatability. In particular, an important feature of a chart, that largely determines the repeatability of visual acuity measurement, is the amount of size change attributed to each letter. The methods used to score visual acuity performance also affect repeatability. It is possible to evaluate acuity score validity and repeatability using the statistical principles discussed here.
Prior exposure to repeated immobilization or chronic unpredictable stress protects from some negative sequels of an acute immobilization.

Science.gov (United States)

Pastor-Ciurana, Jordi; Rabasa, Cristina; Ortega-Sánchez, Juan A; Sanchís-Ollè, Maria; Gabriel-Salazar, Marina; Ginesta, Marta; Belda, Xavier; Daviu, Núria; Nadal, Roser; Armario, Antonio

2014-05-15

Exposure to chronic unpredictable stress (CUS) is gaining acceptance as a putative animal model of depression. However, there is evidence that chronic exposure to stress can offer non-specific stress protection from some effects of acute superimposed stressors. We then compared in adult male rats the protection afforded by prior exposure to CUS with the one offered by repeated immobilization on boards (IMO) regarding some of the negative consequences of an acute exposure to IMO. Repeated exposure to IMO protected from the negative consequences of an acute IMO on activity in an open-field, saccharin intake and body weight gain. Active coping during IMO (struggling) was markedly reduced by repeated exposure to the same stressor, but it was not affected by a prior history of CUS, suggesting that our CUS protocol does not appear to impair active coping responses. CUS exposure itself caused a strong reduction of activity in the open-field but appeared to protect from the hypo-activity induced by acute IMO. Moreover, prior CUS offered partial protection from acute IMO-induced reduction of saccharin intake and body weight gain. It can be concluded that a prior history of CUS protects from some of the negative consequences of exposure to a novel severe stressor, suggesting the development of partial cross-adaptation whose precise mechanisms remain to be studied. Copyright © 2014 Elsevier B.V. All rights reserved.
The open science grid

International Nuclear Information System (INIS)

Pordes, R.

2004-01-01

The U.S. LHC Tier-1 and Tier-2 laboratories and universities are developing production Grids to support LHC applications running across a worldwide Grid computing system. Together with partners in computer science, physics grid projects and active experiments, we will build a common national production grid infrastructure which is open in its architecture, implementation and use. The Open Science Grid (OSG) model builds upon the successful approach of last year's joint Grid2003 project. The Grid3 shared infrastructure has for over eight months provided significant computational resources and throughput to a range of applications, including ATLAS and CMS data challenges, SDSS, LIGO, and biology analyses, and computer science demonstrators and experiments. To move towards LHC-scale data management, access and analysis capabilities, we must increase the scale, services, and sustainability of the current infrastructure by an order of magnitude or more. Thus, we must achieve a significant upgrade in its functionalities and technologies. The initial OSG partners will build upon a fully usable, sustainable and robust grid. Initial partners include the US LHC collaborations, DOE and NSF Laboratories and Universities and Trillium Grid projects. The approach is to federate with other application communities in the U.S. to build a shared infrastructure open to other sciences and capable of being modified and improved to respond to needs of other applications, including CDF, D0, BaBar, and RHIC experiments. We describe the application-driven, engineered services of the OSG, short term plans and status, and the roadmap for a consortium, its partnerships and national focus
Surface antigens and potential virulence factors from parasites detected by comparative genomics of perfect amino acid repeats

Directory of Open Access Journals (Sweden)

Adler Joël

2007-12-01

Full Text Available Abstract Background Many parasitic organisms, eukaryotes as well as bacteria, possess surface antigens with amino acid repeats. Making up the interface between host and pathogen such repetitive proteins may be virulence factors involved in immune evasion or cytoadherence. They find immunological applications in serodiagnostics and vaccine development. Here we use proteins which contain perfect repeats as a basis for comparative genomics between parasitic and free-living organisms. Results We have developed Reptile http://reptile.unibe.ch, a program for proteome-wide probabilistic description of perfect repeats in proteins. Parasite proteomes exhibited a large variance regarding the proportion of repeat-containing proteins. Interestingly, there was a good correlation between the percentage of highly repetitive proteins and mean protein length in parasite proteomes, but not at all in the proteomes of free-living eukaryotes. Reptile combined with programs for the prediction of transmembrane domains and GPI-anchoring resulted in an effective tool for in silico identification of potential surface antigens and virulence factors from parasites. Conclusion Systemic surveys for perfect amino acid repeats allowed basic comparisons between free-living and parasitic organisms that were directly applicable to predict proteins of serological and parasitological importance. An on-line tool is available at http://genomics.unibe.ch/dora.
Potentials and limitations of histone repeat sequences for phylogenetic reconstruction of Sophophora.

Science.gov (United States)

Baldo, A M; Les, D H; Strausbaugh, L D

1999-11-01

Simplified DNA sequence acquisition has provided many new data sets that are useful for phylogenetic reconstruction, including single- and multiple-copy nuclear and organellar genes. Although transcribed regions receive much attention, nontranscribed regions have recently been added to the repertoire of sequences suitable for phylogenetic studies, especially for closely related taxa. We evaluated the efficacy of a small portion of the histone repeat for phylogenetic reconstruction among Drosophila species. Histone repeats in invertebrates offer distinct advantages similar to those of widely used ribosomal repeats. First, the units are tandemly repeated and undergo concerted evolution. Second, histone repeats include both highly conserved coding and variable intergenic regions. This composition facilitates application of "universal" primers spanning potentially informative sites. We examined a small region of the histone repeat, including the intergenic spacer segments of coding regions from the divergently transcribed H2A and H2B histone genes. The spacer (about 230 bp) exists as a mosaic with highly conserved functional motifs interspersed with rapidly diverging regions; the former aid in alignment of the spacer. There are no ambiguities in alignment of coding regions. Coding and noncoding regions were analyzed together and separately for phylogenetic information. Parsimony, distance, and maximum-likelihood methods successfully retrieve the corroborated phylogeny for the taxa examined. This study demonstrates the resolving power of a small histone region which may now be added to the growing collection of phylogenetically useful DNA sequences.
Growth Kinematics of Opening-Mode Fractures

Science.gov (United States)

Eichhubl, P.; Alzayer, Y.; Laubach, S.; Fall, A.

2014-12-01

Fracture aperture is a primary control on flow in fractured reservoirs of low matrix permeability including unconventional oil and gas reservoirs and most geothermal systems. Guided by principles of linear elastic fracture mechanics, fracture aperture is generally assumed to be a linear function of fracture length and elastic material properties. Natural opening-mode fractures with significant preserved aperture are observed in core and outcrop indicative of fracture opening strain accommodated by permanent solution-precipitation creep. Fracture opening may thus be decoupled from length growth if the material effectively weakens after initial elastic fracture growth by either non-elastic deformation processes or changes in elastic properties. To investigate the kinematics of fracture length and aperture growth, we reconstructed the opening history of three opening-mode fractures that are bridged by crack-seal quartz cement in Travis Peak Sandstone of the SFOT-1 well, East Texas. Similar crack-seal cement bridges had been interpreted to form by repeated incremental fracture opening and subsequent precipitation of quartz cement. We imaged crack-seal cement textures for bridges sampled at varying distance from the tips using scanning electron microscope cathodoluminescence, and determined the number and thickness of crack-seal cement increments as a function of position along the fracture length and height. Observed trends in increment number and thickness are consistent with an initial stage of fast fracture propagation relative to aperture growth, followed by a stage of slow propagation and pronounced aperture growth. Consistent with fluid inclusion observations indicative of fracture opening and propagation occurring over 30-40 m.y., we interpret the second phase of pronounced aperture growth to result from fracture opening strain accommodated by solution-precipitation creep and concurrent slow, possibly subcritical, fracture propagation. Similar deformation
Fostering repeat donations in Ghana.

Science.gov (United States)

Owusu-Ofori, S; Asenso-Mensah, K; Boateng, P; Sarkodie, F; Allain, J-P

2010-01-01

Most African countries are challenged in recruiting and retaining voluntary blood donors by cost and other complexities and in establishing and implementing national blood policies. The availability of replacement donors who are a cheaper source of blood has not enhanced repeat voluntary donor initiatives. An overview of activities for recruiting and retaining voluntary blood donors was carried out. Donor records from mobile sessions were reviewed from 2002 to 2008. A total of 71,701 blood donations; 45,515 (63.5%) being voluntary donations with 11,680 (25%) repeat donations were collected during the study period. Donations from schools and colleges contributed a steady 60% of total voluntary whilst radio station blood drives increased contribution from 10 to 27%. Though Muslim population is less than 20%, blood collection was above the 30-donation cost-effectiveness threshold with a repeat donation trend reaching 60%. In contrast Christian worshippers provided donations. Repeat donation trends amongst school donors and radio blood drives were 20% and 70% respectively. Repeat donations rates have been variable amongst different blood donor groups in Kumasi, Ghana. The impact of community leaders in propagating altruism cannot be overemphasized. Programs aiming at motivating replacement donors to be repeat donors should be developed and assessed. Copyright 2009 The International Association for Biologicals. All rights reserved.
Application of a Reinforced Self-Compacting Concrete Jacket in Damaged Reinforced Concrete Beams under Monotonic and Repeated Loading

Directory of Open Access Journals (Sweden)

Constantin E. Chalioris

2013-01-01

Full Text Available This paper presents the findings of an experimental study on the application of a reinforced self-compacting concrete jacketing technique in damaged reinforced concrete beams. Test results of 12 specimens subjected to monotonic loading up to failure or under repeated loading steps prior to total failure are included. First, 6 beams were designed to be shear dominated, constructed by commonly used concrete, were initially tested, damaged, and failed in a brittle manner. Afterwards, the shear-damaged beams were retrofitted using a self-compacting concrete U-formed jacket that consisted of small diameter steel bars and U-formed stirrups in order to increase their shear resistance and potentially to alter their initially observed shear response to a more ductile one. The jacketed beams were retested under the same loading. Test results indicated that the application of reinforced self-compacting concrete jacketing in damaged reinforced concrete beams is a promising rehabilitation technique. All the jacketed beams showed enhanced overall structural response and 35% to 50% increased load bearing capacities. The ultimate shear load of the jacketed beams varied from 39.7 to 42.0 kN, whereas the capacity of the original beams was approximately 30% lower. Further, all the retrofitted specimens exhibited typical flexural response with high values of deflection ductility.
Solenoid hammer valve developed for quick-opening requirements

Science.gov (United States)

Wrench, E. H.

1967-01-01

Quick-opening lightweight solenoid hammer valve requires a low amount of electrical energy to open, and closes by the restoring action of the mechanical springs. This design should be applicable to many quick-opening requirements in fluid systems.
An Extension to Deng’s Entropy in the Open World Assumption with an Application in Sensor Data Fusion

Directory of Open Access Journals (Sweden)

Yongchuan Tang

2018-06-01

Full Text Available Quantification of uncertain degree in the Dempster-Shafer evidence theory (DST framework with belief entropy is still an open issue, even a blank field for the open world assumption. Currently, the existed uncertainty measures in the DST framework are limited to the closed world where the frame of discernment (FOD is assumed to be complete. To address this issue, this paper focuses on extending a belief entropy to the open world by considering the uncertain information represented as the FOD and the nonzero mass function of the empty set simultaneously. An extension to Deng’s entropy in the open world assumption (EDEOW is proposed as a generalization of the Deng’s entropy and it can be degenerated to the Deng entropy in the closed world wherever necessary. In order to test the reasonability and effectiveness of the extended belief entropy, an EDEOW-based information fusion approach is proposed and applied to sensor data fusion under uncertainty circumstance. The experimental results verify the usefulness and applicability of the extended measure as well as the modified sensor data fusion method. In addition, a few open issues still exist in the current work: the necessary properties for a belief entropy in the open world assumption, whether there exists a belief entropy that satisfies all the existed properties, and what is the most proper fusion frame for sensor data fusion under uncertainty.
Intraabdominal laparoscopy-assisted "open" vessel ligation of testicular vessels: a potential treatment for varicocele.

Science.gov (United States)

Miyano, Go; Miyahara, Katsumi; Halibieke, Abudebieke; Lane, Geoffrey J; Okazaki, Tadaharu; Yamataka, Atsuyuki

2011-10-01

We tested our laparoscopy-assisted "open" ligation (LOL) technique on testicular vessels. We ligated the left testicular artery and vein (TAV) in 8-week-old male Wister rats using LOL (LOL group; n=10) or laparotomy (open group; n=10). In LOL, a 0-degree laparoscope was introduced through a 5-mm epigastric trocar. A 3-mm grasper was used to expose the left TAV. A lapa-her-closure (LHC) needle loaded with 3-0 SurgiPro was directly inserted into the left lower quadrant where the left TAV should be and advanced under the vessels, and the suture material was released leaving one end outside. The LHC was then withdrawn a little and advanced again over the vessels to grasp the end of the suture material just released to bring it outside. This was proximally repeated. The two ends of both sutures were conventionally tied outside, and the knot was passed through the insertion site and tightened around the vessels. In the open group, the left TAV were ligated using two 3-0 SurgiPro ties. In both groups, the right side was left intact. All rats were sacrificed 2 weeks postoperatively, and both testes were examined with hematoxylin and eosin. Treatment time was 5-7 minutes for LOL and 7-8 minutes for the open group. Postoperative recovery was uneventful. No adhesions were present between the ligated vessels and bowel in any rat. Histopathology of all left testes showed coagulative necrosis of germinal cells and seminiferous tubules; all right testes were normal. LOL appears to be as effective as open ligation and may find application for treating varicocele.
Balancing Absorptive Capacity and Inbound Open Innovation for Sustained Innovative Performance

DEFF Research Database (Denmark)

Bongsun, Kim; Kim, Eonsoo; Foss, Nicolai Juul

2016-01-01

How can a firm develop new ideas and turn them into profitable innovations on a sustained basis? We address this fundamental issue in a novel way by developing an integrative framework of absorptive capacity (AC) and inbound open innovation that is rooted in the attention-based view of the firm. We...... specifically address why a balance between open and closed innovation is important from the perspective of absorptive capacity, and show how it may be brought about. Pursuing either open or closed inbound innovation alone may result in an imbalance between potential AC and realized AC as well as inward......-looking AC and outward-looking AC, which will hinder innovative performance.We argue that practicing open and closed inbound innovation repeatedly and alternately by switching organizational attentions, and thus developing the associated AC, can facilitate balancing absorptive capacity and lead to innovative...
In situ optical sequencing and structure analysis of a trinucleotide repeat genome region by localization microscopy after specific COMBO-FISH nano-probing

Science.gov (United States)

Stuhlmüller, M.; Schwarz-Finsterle, J.; Fey, E.; Lux, J.; Bach, M.; Cremer, C.; Hinderhofer, K.; Hausmann, M.; Hildenbrand, G.

2015-10-01

Trinucleotide repeat expansions (like (CGG)n) of chromatin in the genome of cell nuclei can cause neurological disorders such as for example the Fragile-X syndrome. Until now the mechanisms are not clearly understood as to how these expansions develop during cell proliferation. Therefore in situ investigations of chromatin structures on the nanoscale are required to better understand supra-molecular mechanisms on the single cell level. By super-resolution localization microscopy (Spectral Position Determination Microscopy; SPDM) in combination with nano-probing using COMBO-FISH (COMBinatorial Oligonucleotide FISH), novel insights into the nano-architecture of the genome will become possible. The native spatial structure of trinucleotide repeat expansion genome regions was analysed and optical sequencing of repetitive units was performed within 3D-conserved nuclei using SPDM after COMBO-FISH. We analysed a (CGG)n-expansion region inside the 5' untranslated region of the FMR1 gene. The number of CGG repeats for a full mutation causing the Fragile-X syndrome was found and also verified by Southern blot. The FMR1 promotor region was similarly condensed like a centromeric region whereas the arrangement of the probes labelling the expansion region seemed to indicate a loop-like nano-structure. These results for the first time demonstrate that in situ chromatin structure measurements on the nanoscale are feasible. Due to further methodological progress it will become possible to estimate the state of trinucleotide repeat mutations in detail and to determine the associated chromatin strand structural changes on the single cell level. In general, the application of the described approach to any genome region will lead to new insights into genome nano-architecture and open new avenues for understanding mechanisms and their relevance in the development of heredity diseases.
Repeated DNA sequences in fungi

Energy Technology Data Exchange (ETDEWEB)

Dutta, S K

1974-11-01

Several fungal species, representatives of all broad groups like basidiomycetes, ascomycetes and phycomycetes, were examined for the nature of repeated DNA sequences by DNA:DNA reassociation studies using hydroxyapatite chromatography. All of the fungal species tested contained 10 to 20 percent repeated DNA sequences. There are approximately 100 to 110 copies of repeated DNA sequences of approximately 4 x 10/sup 7/ daltons piece size of each. Repeated DNA sequence homoduplexes showed on average 5/sup 0/C difference of T/sub e/50 (temperature at which 50 percent duplexes dissociate) values from the corresponding homoduplexes of unfractionated whole DNA. It is suggested that a part of repetitive sequences in fungi constitutes mitochondrial DNA and a part of it constitutes nuclear DNA. (auth)
Topological characteristics of helical repeat proteins

NARCIS (Netherlands)

Groves, M R; Barford, D

The recent elucidation of protein structures based upon repeating amino acid motifs, including the armadillo motif, the HEAT motif and tetratricopeptide repeats, reveals that they belong to the class of helical repeat proteins. These proteins share the common property of being assembled from tandem
UK 2009-2010 repeat station report

Directory of Open Access Journals (Sweden)

Thomas J.G. Shanahan

2013-03-01

Full Text Available The British Geological Survey is responsible for conducting the UK geomagnetic repeat station programme. Measurements made at the UK repeat station sites are used in conjunction with the three UK magnetic observatories: Hartland, Eskdalemuir and Lerwick, to produce a regional model of the local field each year. The UK network of repeat stations comprises 41 stations which are occupied at approximately 3-4 year intervals. Practices for conducting repeat station measurements continue to evolve as advances are made in survey instrumentation and as the usage of the data continues to change. Here, a summary of the 2009 and 2010 UK repeat station surveys is presented, highlighting the measurement process and techniques, density of network, reduction process and recent results.
Colloquium: Non-Markovian dynamics in open quantum systems

Science.gov (United States)

Breuer, Heinz-Peter; Laine, Elsi-Mari; Piilo, Jyrki; Vacchini, Bassano

2016-04-01

The dynamical behavior of open quantum systems plays a key role in many applications of quantum mechanics, examples ranging from fundamental problems, such as the environment-induced decay of quantum coherence and relaxation in many-body systems, to applications in condensed matter theory, quantum transport, quantum chemistry, and quantum information. In close analogy to a classical Markovian stochastic process, the interaction of an open quantum system with a noisy environment is often modeled phenomenologically by means of a dynamical semigroup with a corresponding time-independent generator in Lindblad form, which describes a memoryless dynamics of the open system typically leading to an irreversible loss of characteristic quantum features. However, in many applications open systems exhibit pronounced memory effects and a revival of genuine quantum properties such as quantum coherence, correlations, and entanglement. Here recent theoretical results on the rich non-Markovian quantum dynamics of open systems are discussed, paying particular attention to the rigorous mathematical definition, to the physical interpretation and classification, as well as to the quantification of quantum memory effects. The general theory is illustrated by a series of physical examples. The analysis reveals that memory effects of the open system dynamics reflect characteristic features of the environment which opens a new perspective for applications, namely, to exploit a small open system as a quantum probe signifying nontrivial features of the environment it is interacting with. This Colloquium further explores the various physical sources of non-Markovian quantum dynamics, such as structured environmental spectral densities, nonlocal correlations between environmental degrees of freedom, and correlations in the initial system-environment state, in addition to developing schemes for their local detection. Recent experiments addressing the detection, quantification, and control of
Open Polar Server (OPS—An Open Source Infrastructure for the Cryosphere Community

Directory of Open Access Journals (Sweden)

Weibo Liu

2016-03-01

Full Text Available The Center for Remote Sensing of Ice Sheets (CReSIS at the University of Kansas has collected approximately 1000 terabytes (TB of radar depth sounding data over the Arctic and Antarctic ice sheets since 1993 in an effort to map the thickness of the ice sheets and ultimately understand the impacts of climate change and sea level rise. In addition to data collection, the storage, management, and public distribution of the dataset are also primary roles of the CReSIS. The Open Polar Server (OPS project developed a free and open source infrastructure to store, manage, analyze, and distribute the data collected by CReSIS in an effort to replace its current data storage and distribution approach. The OPS infrastructure includes a spatial database management system (DBMS, map and web server, JavaScript geoportal, and MATLAB application programming interface (API for the inclusion of data created by the cryosphere community. Open source software including GeoServer, PostgreSQL, PostGIS, OpenLayers, ExtJS, GeoEXT and others are used to build a system that modernizes the CReSIS data distribution for the entire cryosphere community and creates a flexible platform for future development. Usability analysis demonstrates the OPS infrastructure provides an improved end user experience. In addition, interpolating glacier topography is provided as an application example of the system.
Variants in the ASB10 Gene Are Associated with Primary Open Angle Glaucoma

NARCIS (Netherlands)

Micheal, S.; Ayub, H.; Islam, F.; Siddiqui, S.N.; Khan, W.A.; Akhtar, F.; Qamar, R.; Khan, M.I.; Hollander, A.I. den

2015-01-01

BACKGROUND: Recently nonsynonymous coding variants in the ankyrin repeats and suppressor of cytokine signaling box-containing protein 10 (ASB10) gene were found to be associated with primary open angle glaucoma (POAG) in cohorts from Oregon and Germany, but this finding was not confirmed in an
Repeated mild traumatic brain injury can cause acute neurologic impairment without overt structural damage in juvenile rats.

Directory of Open Access Journals (Sweden)

Alicia Meconi

Full Text Available Repeated concussion is becoming increasingly recognized as a serious public health concern around the world. Moreover, there is a greater awareness amongst health professionals of the potential for repeated pediatric concussions to detrimentally alter the structure and function of the developing brain. To better study this issue, we developed an awake closed head injury (ACHI model that enabled repeated concussions to be performed reliably and reproducibly in juvenile rats. A neurological assessment protocol (NAP score was generated immediately after each ACHI to help quantify the cumulative effects of repeated injury on level of consciousness, and basic motor and reflexive capacity. Here we show that we can produce a repeated ACHI (4 impacts in two days in both male and female juvenile rats without significant mortality or pain. We show that both single and repeated injuries produce acute neurological deficits resembling clinical concussion symptoms that can be quantified using the NAP score. Behavioural analyses indicate repeated ACHI acutely impaired spatial memory in the Barnes maze, and an interesting sex effect was revealed as memory impairment correlated moderately with poorer NAP score performance in a subset of females. These cognitive impairments occurred in the absence of motor impairments on the Rotarod, or emotional changes in the open field and elevated plus mazes. Cresyl violet histology and structural magnetic resonance imaging (MRI indicated that repeated ACHI did not produce significant structural damage. MRI also confirmed there was no volumetric loss in the cortex, hippocampus, or corpus callosum of animals at 1 or 7 days post-ACHI. Together these data indicate that the ACHI model can provide a reliable, high throughput means to study the effects of concussions in juvenile rats.

Repeated rendezvous treatment of PTBD and ERCP in patients with recurrent obstructive jaundice.

Science.gov (United States)

Liu, Yingdi; Meng, Jianyun; Wang, Jianhua; Wang, Zhiqiang; Wang, Xiangdong; Linghu, Enqiang; Li, Wen; Yang, Yunsheng

2010-01-01

Repeated applications of rendezvous technique combining percutaneous transhepatic biliary drainage (PTBD) with endoscopic retrograde cholangiopancreatography (ERCP) (PE) in patients with recurrent obstructive jaundice have not been reported. The present study aimed to evaluate treatment effects of this technique in patients who previously received the same rendezvous treatment. Repeated PE rendezvous procedure was performed in 27 patients who received the same procedure previously and had recurrent obstructive jaundice. Twenty-two patients were treated by second-time rendezvous procedure and five patients by third-time. The clinical characteristics and therapeutic effects were retrospectively analyzed. By means of repeated rendezvous technique, 26 patients gained access to the bile duct and were successfully implanted new stents, only one failed with stent implantation. Total serum bilirubin level decreased within one week from 221.89 +/- 64.70 micromol/L to 156.0 +/- 32.2 micromol/L in patients with second-time treatment and from 297.07 +/- 109.12 micromol/L to 238.77 +/- 36.81 micromol/L in patients with third-time treatment. There was no severe complications observed that are associated with repeated PE procedure. Rendezvous procedure of PTBD and ERCP could be used repeatedly and effectively for patients who present recurrent obstructive jaundice after ERCP failure.
Reject/repeat analysis and the effect prior film viewing has on a department's reject/repeat rate

International Nuclear Information System (INIS)

Clark, P.A.; Hogg, P.

2003-01-01

Purpose: Achieving cost-effectiveness within the NHS is an old initiative but one that has again been highlighted by recent government policies (The New NHS-Modern and Dependable, Stationary Office, London, 1997). It has been reiterated that it is the responsibility of individual Trusts to devise means to provide such a service. Reject/repeat analyses have long been the primary tool used to assess the cost-effectiveness of radiography departments (Quality Assurance in Diagnostic Radiology, WHO, Geneva, 1982). This research paper examines an in-house initiative (viewing patients' previous films) commonly employed in other Health Trusts in order to reduce departmental repeat/reject rates. Method: Three hundred orthopaedic patients with hip, knee and ankle prostheses were included in a reject/repeat analysis. The aim was to investigate whether or not viewing patient's previous relevant radiographs would be advantageous to the practicing radiographer. This was done through an audit cycle consisting of two audit periods each lasting for 3 months. The primary audit period recorded the baseline repeat/reject rate, with the secondary audit period recording the repeat/reject rate under an experimental condition of viewing the relevant radiographs. Results: The baseline audit revealed repeat rates of 33% in orthopaedic patients with hip, knee and ankle prostheses. The availability of prior film viewing to the radiographer reduced this repeat rate to 10.6%. Conclusion: Prior film viewing dramatically reduced the department's repeat/reject rate by 22.4%. This provides scope for significant patient dose reductions as well as reducing departmental film expenses. This is an underestimated initiative and should be used appropriately in routine clinical practice
Making a Business out of Open Source

CERN Multimedia

CERN. Geneva

2007-01-01

Marc Fleury, a physicist by training, retired in his thirties after selling the company JBoss, which made an open-source application server, to Red Hat. He will talk about the various business models of open source software. From leveraging available open source software and casual contributions, to on-ramp models and subscription models, various business models have been explored and function. Not all models work for all software fields and business types. He will review those business models in context and survey "state-of-the-art" economic models for open source software production. Speaker Bio: Marc Fleury is the creator of JBoss, an open-source Java application server. Fleury holds a degree in mathematics and a Doctorate in physics from the École Polytechnique in Paris and a Master in Theoretical Physics from the École Normale. He worked in France for Sun Microsystems before moving to the United States where he has worked on various Java projects. Fleury's research interest focused on middleware, a...
Genomic organization and developmental fate of adjacent repeated sequences in a foldback DNA clone of Tetrahymena thermophila

International Nuclear Information System (INIS)

Tschunko, A.H.; Loechel, R.H.; McLaren, N.C.; Allen, S.L.

1987-01-01

DNA sequence elimination and rearrangement occurs during the development of somatic cell lineages of eukaryotes and was first discovered over a century ago. However, the significance and mechanism of chromatin elimination are not understood. DNA elimination also occurs during the development of the somatic macronucleus from the germinal micronucleus in unicellular ciliated protozoa such as Tetrahymena thermophila. In this study foldback DNA from the micronucleus was used as a probe to isolate ten clones. All of those tested (4/4) contained sequences that were repetitive in the micronucleus and rearranged in the macronucleus. Inverted repeated sequences were present in one clone. This clone, pTtFBl, was subjected to a detailed analysis of its developmental fate. Subregions were subcloned and used as probes against Southern blots of micronuclear and macronuclear DNA. DNA was labeled with [ 33 P]-labeled dATP. The authors found that all subregions defined repeated sequence families in the micronuclear genome. A minimum of four different families was defined, two of which are retained in the macronucleus and two of which are completely eliminated. The inverted repeat family is retained with little rearrangement. Two of the families, defined by subregions that do not contain parts of the inverted repeat are totally eliminated during macronuclear development-and contain open reading frames. The significance of retained inverted repeats to the process of elimination is discussed
A Case for Including Transactions in OpenMP

Energy Technology Data Exchange (ETDEWEB)

Wong, M; Bihari, B L; de Supinski, B R; Wu, P; Michael, M; Liu, Y; Chen, W

2010-01-25

Transactional Memory (TM) has received significant attention recently as a mechanism to reduce the complexity of shared memory programming. We explore the potential of TM to improve OpenMP applications. We combine a software TM (STM) system to support transactions with an OpenMP implementation to start thread teams and provide task and loop-level parallelization. We apply this system to two application scenarios that reflect realistic TM use cases. Our results with this system demonstrate that even with the relatively high overheads of STM, transactions can outperform OpenMP critical sections by 10%. Overall, our study demonstrates that extending OpenMP to include transactions would ease programming effort while allowing improved performance.
Repeat-swap homology modeling of secondary active transporters: updated protocol and prediction of elevator-type mechanisms.

Science.gov (United States)

Vergara-Jaque, Ariela; Fenollar-Ferrer, Cristina; Kaufmann, Desirée; Forrest, Lucy R

2015-01-01

Secondary active transporters are critical for neurotransmitter clearance and recycling during synaptic transmission and uptake of nutrients. These proteins mediate the movement of solutes against their concentration gradients, by using the energy released in the movement of ions down pre-existing concentration gradients. To achieve this, transporters conform to the so-called alternating-access hypothesis, whereby the protein adopts at least two conformations in which the substrate binding sites are exposed to one or other side of the membrane, but not both simultaneously. Structures of a bacterial homolog of neuronal glutamate transporters, GltPh, in several different conformational states have revealed that the protein structure is asymmetric in the outward- and inward-open states, and that the conformational change connecting them involves a elevator-like movement of a substrate binding domain across the membrane. The structural asymmetry is created by inverted-topology repeats, i.e., structural repeats with similar overall folds whose transmembrane topologies are related to each other by two-fold pseudo-symmetry around an axis parallel to the membrane plane. Inverted repeats have been found in around three-quarters of secondary transporter folds. Moreover, the (a)symmetry of these systems has been successfully used as a bioinformatic tool, called "repeat-swap modeling" to predict structural models of a transporter in one conformation using the known structure of the transporter in the complementary conformation as a template. Here, we describe an updated repeat-swap homology modeling protocol, and calibrate the accuracy of the method using GltPh, for which both inward- and outward-facing conformations are known. We then apply this repeat-swap homology modeling procedure to a concentrative nucleoside transporter, VcCNT, which has a three-dimensional arrangement related to that of GltPh. The repeat-swapped model of VcCNT predicts that nucleoside transport also
Repeat-swap homology modeling of secondary active transporters: updated protocol and prediction of elevator-type mechanisms

Directory of Open Access Journals (Sweden)

Cristina eFenollar Ferrer

2015-09-01

Full Text Available Secondary active transporters are critical for neurotransmitter clearance and recycling during synaptic transmission and uptake of nutrients. These proteins mediate the movement of solutes against their concentration gradients, by using the energy released in the movement of ions down pre-existing concentration gradients. To achieve this, transporters conform to the so-called alternating-access hypothesis, whereby the protein adopts at least two conformations in which the substrate binding sites are exposed to either the outside or inside of the membrane, but not both simultaneously. Structures of a bacterial homolog of neuronal glutamate transporters, GltPh, in several different conformational states have revealed that the protein structure is asymmetric in the outward- and inward-open states, and that the conformational change connecting them involves a elevator-like movement of a substrate binding domain across the membrane. The structural asymmetry is created by inverted-topology repeats, i.e., structural repeats with similar overall folds whose transmembrane topologies are related to each other by two-fold pseudo-symmetry around an axis parallel to the membrane plane. Inverted repeats have been found in around three-quarters of secondary transporter folds. Moreover, the (asymmetry of these systems has been successfully used as a bioinformatic tool, called repeat-swap modeling to predict structural models of a transporter in one conformation using the known structure of the transporter in the complementary conformation as a template. Here, we describe an updated repeat-swap homology modeling protocol, and calibrate the accuracy of the method using GltPh, for which both inward- and outward-facing conformations are known. We then apply this repeat-swap homology modeling procedure to a concentrative nucleoside transporter, VcCNT, which has a three-dimensional arrangement related to that of GltPh. The repeat-swapped model of VcCNT predicts that
OpenHealth Platform for Interactive Contextualization of Population Health Open Data

OpenAIRE

Almeida, Jonas S; Hajagos, Janos; Crnosija, Ivan; Kurc, Tahsin; Saltz, Mary; Saltz, Joel

2015-01-01

The financial incentives for data science applications leading to improved health outcomes, such as DSRIP (bit.ly/dsrip), are well-aligned with the broad adoption of Open Data by State and Federal agencies. This creates entirely novel opportunities for analytical applications that make exclusive use of the pervasive Web Computing platform. The framework described here explores this new avenue to contextualize Health data in a manner that relies exclusively on the native JavaScript interpreter...
Repeatability of the three dimensional kinematics of the pelvis, spine and lower limbs while performing selected exercises

Directory of Open Access Journals (Sweden)

Skublewska-Paszkowska Maria

2017-01-01

Full Text Available Three-dimensional optical systems are used for calculating many kinetic and kinematic parameters. The obtained data are precise; however, their repeatability is a very important aspect. The aim of this paper is to verify the range of motion repeatability of one healthy subject in the joints of the pelvis, spine and lower limbs based on the coefficient of variation. The participant performed seven exercises, repeated five times: two-leg squat, single-leg squat, forward bending, forward-step motion, step onto the stair, hip extension in a standing position and tip-toe extension while standing. Motion was recorded using Vicon motion capture system consisting of eight NIR cameras. The participant had 39 markers attached to her body according to the Plug-in Gait model. The coefficient of variation was calculated in three dimensions (X, Y and Z. The greatest repeatability, pursuant to the coefficient, was observed during the two-leg squat and forward bending in the sagittal plane (X coordinate. It was also high during the single-leg squat. The lowest repeatability was observed during the tip-toe extension while standing and the hip extension in a standing position. During the step onto the stair and the forward-step motion, a higher repeatability of measurement occurred in the open kinematic chain than in the closed chain; in the hip extension the reverse occurred. Repeatability of a range of motion is different in two types of kinematic chain and in 7 exercises. Exercises such as tip-toe extension and hip extension, which require a greater ability to balance, indicated more variability in movement.
Advances in the use of open-source information

International Nuclear Information System (INIS)

Horak, K.; Bleakly, D.; McDaniel, M.

2013-01-01

Great advances have been made in the application of open-source information for Safeguards. However, the open-source 'ecosystem' is rapidly evolving. Recently, the combination of powerful smart-phones and the World Wide Web have led to novel developments for mapping the impact of natural and man-made disasters. Researchers are learning to harness online volunteers as citizen scientists. Online social media such as Facebook, LinkedIn, and Twitter are becoming accepted channels of credible information. Geo-spatially-aware applications (augmented reality applications) are capable of overlaying data upon a smart-phone's view screen. The authors review available open-source tools and technologies. These and other developments will have a significant effect on the collection, evaluation, structuring, analysis, and dissemination of safeguards-relevant information. In addition, the modern, open Internet is posing new security threats.not just viruses and their ilk, but threats based on digital traces left by browsing the open Web. The authors present a case study of the disastrous toxic flood near Devecser, Hungary in October 2010 for which we get 621,000 results for everything related to search terms, 68,000 blog posts on the topic, 43,300 images available and then give recommendations for the future use of open-source information and software tools. (authors)
Advances in the use of open-source information

Energy Technology Data Exchange (ETDEWEB)

Horak, K.; Bleakly, D.; McDaniel, M. [Sandia National Laboratories, Albuquerque, NM (United States)

2013-07-01

Great advances have been made in the application of open-source information for Safeguards. However, the open-source 'ecosystem' is rapidly evolving. Recently, the combination of powerful smart-phones and the World Wide Web have led to novel developments for mapping the impact of natural and man-made disasters. Researchers are learning to harness online volunteers as citizen scientists. Online social media such as Facebook, LinkedIn, and Twitter are becoming accepted channels of credible information. Geo-spatially-aware applications (augmented reality applications) are capable of overlaying data upon a smart-phone's view screen. The authors review available open-source tools and technologies. These and other developments will have a significant effect on the collection, evaluation, structuring, analysis, and dissemination of safeguards-relevant information. In addition, the modern, open Internet is posing new security threats.not just viruses and their ilk, but threats based on digital traces left by browsing the open Web. The authors present a case study of the disastrous toxic flood near Devecser, Hungary in October 2010 for which we get 621,000 results for everything related to search terms, 68,000 blog posts on the topic, 43,300 images available and then give recommendations for the future use of open-source information and software tools. (authors)
TRStalker: an efficient heuristic for finding fuzzy tandem repeats.

Science.gov (United States)

Pellegrini, Marco; Renda, M Elena; Vecchio, Alessio

2010-06-15

Genomes in higher eukaryotic organisms contain a substantial amount of repeated sequences. Tandem Repeats (TRs) constitute a large class of repetitive sequences that are originated via phenomena such as replication slippage and are characterized by close spatial contiguity. They play an important role in several molecular regulatory mechanisms, and also in several diseases (e.g. in the group of trinucleotide repeat disorders). While for TRs with a low or medium level of divergence the current methods are rather effective, the problem of detecting TRs with higher divergence (fuzzy TRs) is still open. The detection of fuzzy TRs is propaedeutic to enriching our view of their role in regulatory mechanisms and diseases. Fuzzy TRs are also important as tools to shed light on the evolutionary history of the genome, where higher divergence correlates with more remote duplication events. We have developed an algorithm (christened TRStalker) with the aim of detecting efficiently TRs that are hard to detect because of their inherent fuzziness, due to high levels of base substitutions, insertions and deletions. To attain this goal, we developed heuristics to solve a Steiner version of the problem for which the fuzziness is measured with respect to a motif string not necessarily present in the input string. This problem is akin to the 'generalized median string' that is known to be an NP-hard problem. Experiments with both synthetic and biological sequences demonstrate that our method performs better than current state of the art for fuzzy TRs and that the fuzzy TRs of the type we detect are indeed present in important biological sequences. TRStalker will be integrated in the web-based TRs Discovery Service (TReaDS) at bioalgo.iit.cnr.it. Supplementary data are available at Bioinformatics online.
Repeating Marx

DEFF Research Database (Denmark)

Fuchs, Christian; Monticelli, Lara

2018-01-01

This introduction sets out the context of the special issue “Karl Marx @ 200: Debating Capitalism & Perspectives for the Future of Radical Theory”, which was published on the occasion of Marx’s bicentenary on 5 May 2018. First, we give a brief overview of contemporary capitalism’s development...... and its crises. Second, we argue that it is important to repeat Marx today. Third, we reflect on lessons learned from 200 years of struggles for alternatives to capitalism. Fourth, we give an overview of the contributions in this special issue. Taken together, the contributions in this special issue show...... that Marx’s theory and politics remain key inspirations for understanding exploitation and domination in 21st-century society and for struggles that aim to overcome these phenomena and establishing a just and fair society. We need to repeat Marx today....
Development of an open metadata schema for prospective clinical research (openPCR) in China.

Science.gov (United States)

Xu, W; Guan, Z; Sun, J; Wang, Z; Geng, Y

2014-01-01

In China, deployment of electronic data capture (EDC) and clinical data management system (CDMS) for clinical research (CR) is in its very early stage, and about 90% of clinical studies collected and submitted clinical data manually. This work aims to build an open metadata schema for Prospective Clinical Research (openPCR) in China based on openEHR archetypes, in order to help Chinese researchers easily create specific data entry templates for registration, study design and clinical data collection. Singapore Framework for Dublin Core Application Profiles (DCAP) is used to develop openPCR and four steps such as defining the core functional requirements and deducing the core metadata items, developing archetype models, defining metadata terms and creating archetype records, and finally developing implementation syntax are followed. The core functional requirements are divided into three categories: requirements for research registration, requirements for trial design, and requirements for case report form (CRF). 74 metadata items are identified and their Chinese authority names are created. The minimum metadata set of openPCR includes 3 documents, 6 sections, 26 top level data groups, 32 lower data groups and 74 data elements. The top level container in openPCR is composed of public document, internal document and clinical document archetypes. A hierarchical structure of openPCR is established according to Data Structure of Electronic Health Record Architecture and Data Standard of China (Chinese EHR Standard). Metadata attributes are grouped into six parts: identification, definition, representation, relation, usage guides, and administration. OpenPCR is an open metadata schema based on research registration standards, standards of the Clinical Data Interchange Standards Consortium (CDISC) and Chinese healthcare related standards, and is to be publicly available throughout China. It considers future integration of EHR and CR by adopting data structure and data
Thermoviscous analysis of open photoacoustic cells

Science.gov (United States)

Mannoor, Madhusoodanan; Kang, Sangmo

2017-11-01

Open photoacoustic cells, apart from the conventional spectroscopic applications, are increasingly useful in bio medical applications such as in vivo blood sugar measurement. Maximising the acoustic pressure amplitude and the quality factor are major design considerations associated with open cells.Conventionaly, resonant photoacoustic cells are analyzed by either transmission line analogy or Eigen mode expansion method. In this study, we conducted a more comprehensive thermo viscous analysis of open photoacoustic cells. A Helmholtz cell and a T-shaped cell, which are acoustically different, are considered for analysis. Effect of geometrical dimensions on the acoustic pressure, quality factor and the intrusion of noise are analyzed and compared between these cells. Specific attention is given to the sizing of the opening and fixtures on it to minimize the radiational losses and the intrusion of noise. Our results are useful for proper selection of the type of open photoacoustic cells for in vivo blood sugar measurement and the optimization of geometric variables of such cells. This research was supported by Basic Science Research Program through the National Research Foundation of Korea (NRF) funded by the Ministry of Science, ICT and future planning (2017R1A2B4005006).
OpenDMAP: An open source, ontology-driven concept analysis engine, with applications to capturing knowledge regarding protein transport, protein interactions and cell-type-specific gene expression

Directory of Open Access Journals (Sweden)

Johnson Helen L

2008-01-01

Full Text Available Abstract Background Information extraction (IE efforts are widely acknowledged to be important in harnessing the rapid advance of biomedical knowledge, particularly in areas where important factual information is published in a diverse literature. Here we report on the design, implementation and several evaluations of OpenDMAP, an ontology-driven, integrated concept analysis system. It significantly advances the state of the art in information extraction by leveraging knowledge in ontological resources, integrating diverse text processing applications, and using an expanded pattern language that allows the mixing of syntactic and semantic elements and variable ordering. Results OpenDMAP information extraction systems were produced for extracting protein transport assertions (transport, protein-protein interaction assertions (interaction and assertions that a gene is expressed in a cell type (expression. Evaluations were performed on each system, resulting in F-scores ranging from .26 – .72 (precision .39 – .85, recall .16 – .85. Additionally, each of these systems was run over all abstracts in MEDLINE, producing a total of 72,460 transport instances, 265,795 interaction instances and 176,153 expression instances. Conclusion OpenDMAP advances the performance standards for extracting protein-protein interaction predications from the full texts of biomedical research articles. Furthermore, this level of performance appears to generalize to other information extraction tasks, including extracting information about predicates of more than two arguments. The output of the information extraction system is always constructed from elements of an ontology, ensuring that the knowledge representation is grounded with respect to a carefully constructed model of reality. The results of these efforts can be used to increase the efficiency of manual curation efforts and to provide additional features in systems that integrate multiple sources for
Magnitude of cyantraniliprole residues in tomato following open field application: pre-harvest interval determination and risk assessment.

Science.gov (United States)

Malhat, Farag; Kasiotis, Konstantinos M; Shalaby, Shehata

2018-02-05

Cyantraniliprole is an anthranilic diamide insecticide, belonging to the ryanoid class, with a broad range of applications against several pests. In the presented work, a reliable analytical technique employing high-performance liquid chromatography coupled with photodiode array detector (HPLC-DAD) for analyzing cyantraniliprole residues in tomato was developed. The method was then applied to field-incurred tomato samples collected after applications under open field conditions. The latter aimed to ensure the safe application of cyantraniliprole to tomato and contribute the derived residue data to the risk assessment under field conditions. Sample preparation involved a single step extraction with acetonitrile and sodium chloride for partitioning. The extract was purified utilizing florisil as cleanup reagent. The developed method was further evaluated by comparing the analytical results with those obtained using the QuEChERS technique. The novel method outbalanced QuEChERS regarding matrix interferences in the analysis, while it met all guideline criteria. Hence, it showed excellent linearity over the assayed concentration and yielded satisfactory recovery rate in the range of 88.9 to 96.5%. The half-life of degradation of cyantraniliprole was determined at 2.6 days. Based on the Codex MRL, the pre-harvest interval (PHI) for cyantraniliprole on tomato was 3 days, after treatment at the recommended dose. To our knowledge, the present work provides the first record on PHI determination of cyantraniliprole in tomato under open field conditions in Egypt and the broad Mediterranean region.
Towards Development of Clustering Applications for Large-Scale Comparative Genotyping and Kinship Analysis Using Y-Short Tandem Repeats.

Science.gov (United States)

Seman, Ali; Sapawi, Azizian Mohd; Salleh, Mohd Zaki

2015-06-01

Y-chromosome short tandem repeats (Y-STRs) are genetic markers with practical applications in human identification. However, where mass identification is required (e.g., in the aftermath of disasters with significant fatalities), the efficiency of the process could be improved with new statistical approaches. Clustering applications are relatively new tools for large-scale comparative genotyping, and the k-Approximate Modal Haplotype (k-AMH), an efficient algorithm for clustering large-scale Y-STR data, represents a promising method for developing these tools. In this study we improved the k-AMH and produced three new algorithms: the Nk-AMH I (including a new initial cluster center selection), the Nk-AMH II (including a new dominant weighting value), and the Nk-AMH III (combining I and II). The Nk-AMH III was the superior algorithm, with mean clustering accuracy that increased in four out of six datasets and remained at 100% in the other two. Additionally, the Nk-AMH III achieved a 2% higher overall mean clustering accuracy score than the k-AMH, as well as optimal accuracy for all datasets (0.84-1.00). With inclusion of the two new methods, the Nk-AMH III produced an optimal solution for clustering Y-STR data; thus, the algorithm has potential for further development towards fully automatic clustering of any large-scale genotypic data.
Assessing soil erosion risk using RUSLE through a GIS open source desktop and web application.

Science.gov (United States)

Duarte, L; Teodoro, A C; Gonçalves, J A; Soares, D; Cunha, M

2016-06-01

Soil erosion is a serious environmental problem. An estimation of the expected soil loss by water-caused erosion can be calculated considering the Revised Universal Soil Loss Equation (RUSLE). Geographical Information Systems (GIS) provide different tools to create categorical maps of soil erosion risk which help to study the risk assessment of soil loss. The objective of this study was to develop a GIS open source application (in QGIS), using the RUSLE methodology for estimating erosion rate at the watershed scale (desktop application) and provide the same application via web access (web application). The applications developed allow one to generate all the maps necessary to evaluate the soil erosion risk. Several libraries and algorithms from SEXTANTE were used to develop these applications. These applications were tested in Montalegre municipality (Portugal). The maps involved in RUSLE method-soil erosivity factor, soil erodibility factor, topographic factor, cover management factor, and support practices-were created. The estimated mean value of the soil loss obtained was 220 ton km(-2) year(-1) ranged from 0.27 to 1283 ton km(-2) year(-1). The results indicated that most of the study area (80 %) is characterized by very low soil erosion level (soil erosion was higher than 962 ton km(-2) year(-1). It was also concluded that areas with high slope values and bare soil are related with high level of erosion and the higher the P and C values, the higher the soil erosion percentage. The RUSLE web and the desktop application are freely available.
Validation and Reliability of a Smartphone Application for the International Prostate Symptom Score Questionnaire: A Randomized Repeated Measures Crossover Study

Science.gov (United States)

Shim, Sung Ryul; Sun, Hwa Yeon; Ko, Young Myoung; Chun, Dong-Il; Yang, Won Jae

2014-01-01

Background Smartphone-based assessment may be a useful diagnostic and monitoring tool for patients. There have been many attempts to create a smartphone diagnostic tool for clinical use in various medical fields but few have demonstrated scientific validity. Objective The purpose of this study was to develop a smartphone application of the International Prostate Symptom Score (IPSS) and to demonstrate its validity and reliability. Methods From June 2012 to May 2013, a total of 1581 male participants (≥40 years old), with or without lower urinary tract symptoms (LUTS), visited our urology clinic via the health improvement center at Soonchunhyang University Hospital (Republic of Korea) and were enrolled in this study. A randomized repeated measures crossover design was employed using a smartphone application of the IPSS and the conventional paper form of the IPSS. Paired t test under a hypothesis of non-inferior trial was conducted. For the reliability test, the intraclass correlation coefficient (ICC) was measured. Results The total score of the IPSS (P=.289) and each item of the IPSS (P=.157-1.000) showed no differences between the paper version and the smartphone version of the IPSS. The mild, moderate, and severe LUTS groups showed no differences between the two versions of the IPSS. A significant correlation was noted in the total group (ICC=.935, Psmartphones could participate. Conclusions The validity and reliability of the smartphone application version were comparable to the conventional paper version of the IPSS. The smartphone application of the IPSS could be an effective method for measuring lower urinary tract symptoms. PMID:24513507

Effect of repeated freezing-thawing on the Achilles tendon of rabbits.

Science.gov (United States)

Chen, Lianxu; Wu, Yanping; Yu, Jiakuo; Jiao, Zhaode; Ao, Yingfang; Yu, Changlong; Wang, Jianquan; Cui, Guoqing

2011-06-01

The increased use of allograft tissue in the reconstruction of anterior cruciate ligament has brought more focus to the effect of storage and treatment on allograft. The purpose of this study was to observe the effect of histology and biomechanics on Achilles tendon in rabbits through repeated freezing-thawing before allograft tendon transplantation. Rabbit Achilles tendons were harvested and processed according to the manufacture's protocol of tissue bank, and freezing-thawing was repeated three times (group 1) and ten times (group 2). Those received only one cycle were used as controls. Then, tendons in each group were selected randomly to make for histological observations and biomechanics test. Histological observation showed that the following changes happened as the number of freezing-thawing increased: the arrangement of tendon bundles and collagen fibrils became disordered until ruptured, cells disrupted and apparent gaps appeared between tendon bundle because the formation of ice crystals. There were significant differences between the experimental and control groups in the values of maximum load, energy of maximum load and maximum stress, whereas no significant differences existed in other values such as stiffness, maximum strain, elastic modulus, and energy density. Therefore, repeated freezing-thawing had histological and biomechanical effect on Achilles tendon in rabbits before allograft tendon transplantation. This indicates that cautions should be taken in the repeated freezing-thawing preparation of allograft tendons in clinical application.
Analysis of repeated measures data

CERN Document Server

Islam, M Ataharul

2017-01-01

This book presents a broad range of statistical techniques to address emerging needs in the field of repeated measures. It also provides a comprehensive overview of extensions of generalized linear models for the bivariate exponential family of distributions, which represent a new development in analysing repeated measures data. The demand for statistical models for correlated outcomes has grown rapidly recently, mainly due to presence of two types of underlying associations: associations between outcomes, and associations between explanatory variables and outcomes. The book systematically addresses key problems arising in the modelling of repeated measures data, bearing in mind those factors that play a major role in estimating the underlying relationships between covariates and outcome variables for correlated outcome data. In addition, it presents new approaches to addressing current challenges in the field of repeated measures and models based on conditional and joint probabilities. Markov models of first...
Spatial cluster detection for repeatedly measured outcomes while accounting for residential history.

Science.gov (United States)

Cook, Andrea J; Gold, Diane R; Li, Yi

2009-10-01

Spatial cluster detection has become an important methodology in quantifying the effect of hazardous exposures. Previous methods have focused on cross-sectional outcomes that are binary or continuous. There are virtually no spatial cluster detection methods proposed for longitudinal outcomes. This paper proposes a new spatial cluster detection method for repeated outcomes using cumulative geographic residuals. A major advantage of this method is its ability to readily incorporate information on study participants relocation, which most cluster detection statistics cannot. Application of these methods will be illustrated by the Home Allergens and Asthma prospective cohort study analyzing the relationship between environmental exposures and repeated measured outcome, occurrence of wheeze in the last 6 months, while taking into account mobile locations.
An Open Modelling Approach for Availability and Reliability of Systems - OpenMARS

CERN Document Server

Penttinen, Jussi-Pekka; Gutleber, Johannes

2018-01-01

This document introduces and gives specification for OpenMARS, which is an open modelling approach for availability and reliability of systems. It supports the most common risk assessment and operation modelling techniques. Uniquely OpenMARS allows combining and connecting models defined with different techniques. This ensures that a modeller has a high degree of freedom to accurately describe the modelled system without limitations imposed by an individual technique. Here the OpenMARS model definition is specified with a tool independent tabular format, which supports managing models developed in a collaborative fashion. Origin of our research is in Future Circular Collider (FCC) study, where we developed the unique features of our concept to model the availability and luminosity production of particle colliders. We were motivated to describe our approach in detail as we see potential further applications in performance and energy efficiency analyses of large scientific infrastructures or industrial processe...
Tuboimpedance: A New Test of Eustachian Tube Function.

Science.gov (United States)

Smith, Matthew E; Zou, Charlie C; Blythe, Andrew J C; Tysome, James R

2017-04-01

Objective Eustachian tube (ET) dysfunction is most frequently caused by a failure of the ET to adequately open; however, there is currently no reliable method of assessing this. Tubomanometry has recently shown good interindividual repeatability as a measure of ET function by measuring middle ear pressure after the application of regulated nasopharyngeal pressures during swallowing. We present the first reports of a novel test: middle ear impedance measurements during standard nasopharyngeal pressure application (tuboimpedance). We assess repeatability in healthy ears and any advantages over tubomanometry. Study Design Exploratory cohort diagnosis study. Setting Tertiary referral center. Subjects Twenty screened, healthy ears (10 volunteers). Methods Tubomanometry and tuboimpedance tests were performed while individuals swallowed with applied nasopharyngeal pressures of 20, 30, 40, and 50 mbar. Eustachian tube opening detection rate and test repeatability (measured by intraclass correlation coefficient [ICC]) for immediate and delayed repeats at each pressure were compared. Results ET opening was detected more frequently using tuboimpedance, with a 100% detection rate using a nasopharyngeal pressure of 30 mbar or more, compared to 88% to 96% with tubomanometry. Detection of ET opening at 20 mbar was possible with tuboimpedance. Repeatability of both tests was mostly strong (ICC >0.7) for both immediate and delayed repeats. Repeatability for the tubomanometry R value was only fair to moderate. Conclusion Tuboimpedance may provide a repeatable measure of ET opening that is easier to perform due to lower nasopharyngeal pressures required and fewer issues with poor ear-probe sealing. Further assessment in patients with different forms of ET dysfunction is required.
Imbibition of ``Open Capillary'': Fundamentals and Applications

Science.gov (United States)

Tani, Marie; Kawano, Ryuji; Kamiya, Koki; Okumura, Ko

2015-11-01

Control or transportation of small amount of liquid is one of the most important issues in various contexts including medical sciences or pharmaceutical industries to fuel delivery. We studied imbibition of ``open capillary'' both experimentally and theoretically, and found simple scaling laws for both statics and dynamics of the imbibition, similarly as that of imbibition of capillary tubes. Furthermore, we revealed the existence of ``precursor film,'' which developed ahead of the imbibing front, and the dynamics of it is described well by another scaling law for capillary rise in a corner. Then, to show capabilities of open capillaries, we demonstrated two experiments by fabricating micro mixing devices to achieve (1) simultaneous multi-color change of the Bromothymol blue (BTB) solution and (2) expression of the green florescent protein (GFP). This research was partly supported by ImPACT Program of Council for Science, Technology and Innovation (Cabinet Office, Government of Japan). M. T. is supported by the Japan Society for the Promotion of Science Research Fellowships for Young Scientists.
OpenStreetMap over WMS

Directory of Open Access Journals (Sweden)

Přemysl Vohnout

2010-02-01

Full Text Available This paper discuss the issues which we faced, while preparing WMS server with OpenStreetMap data of whole Europe. This article is divided into three sections. First is about mandatory applications which are required for working WMS service with OpenStreetMap data. Second is focused on tuning up PostgreSQL. Third is focused on rendering time improvement of layers.
Duke Surgery Patient Safety: an open-source application for anonymous reporting of adverse and near-miss surgical events.

Science.gov (United States)

Pietrobon, Ricardo; Lima, Raquel; Shah, Anand; Jacobs, Danny O; Harker, Matthew; McCready, Mariana; Martins, Henrique; Richardson, William

2007-05-01

Studies have shown that 4% of hospitalized patients suffer from an adverse event caused by the medical treatment administered. Some institutions have created systems to encourage medical workers to report these adverse events. However, these systems often prove to be inadequate and/or ineffective for reviewing the data collected and improving the outcomes in patient safety. To describe the Web-application Duke Surgery Patient Safety, designed for the anonymous reporting of adverse and near-miss events as well as scheduled reporting to surgeons and hospital administration. SOFTWARE ARCHITECTURE: DSPS was developed primarily using Java language running on a Tomcat server and with MySQL database as its backend. Formal and field usability tests were used to aid in development of DSPS. Extensive experience with DSPS at our institution indicate that DSPS is easy to learn and use, has good speed, provides needed functionality, and is well received by both adverse-event reporters and administrators. This is the first description of an open-source application for reporting patient safety, which allows the distribution of the application to other institutions in addition for its ability to adapt to the needs of different departments. DSPS provides a mechanism for anonymous reporting of adverse events and helps to administer Patient Safety initiatives. The modifiable framework of DSPS allows adherence to evolving national data standards. The open-source design of DSPS permits surgical departments with existing reporting mechanisms to integrate them with DSPS. The DSPS application is distributed under the GNU General Public License.
Unusually effective microRNA targeting within repeat-rich coding regions of mammalian mRNAs

Science.gov (United States)

Schnall-Levin, Michael; Rissland, Olivia S.; Johnston, Wendy K.; Perrimon, Norbert; Bartel, David P.; Berger, Bonnie

2011-01-01

MicroRNAs (miRNAs) regulate numerous biological processes by base-pairing with target messenger RNAs (mRNAs), primarily through sites in 3′ untranslated regions (UTRs), to direct the repression of these targets. Although miRNAs have sometimes been observed to target genes through sites in open reading frames (ORFs), large-scale studies have shown such targeting to be generally less effective than 3′ UTR targeting. Here, we show that several miRNAs each target significant groups of genes through multiple sites within their coding regions. This ORF targeting, which mediates both predictable and effective repression, arises from highly repeated sequences containing miRNA target sites. We show that such sequence repeats largely arise through evolutionary duplications and occur particularly frequently within families of paralogous C2H2 zinc-finger genes, suggesting the potential for their coordinated regulation. Examples of ORFs targeted by miR-181 include both the well-known tumor suppressor RB1 and RBAK, encoding a C2H2 zinc-finger protein and transcriptional binding partner of RB1. Our results indicate a function for repeat-rich coding sequences in mediating post-transcriptional regulation and reveal circumstances in which miRNA-mediated repression through ORF sites can be reliably predicted. PMID:21685129
OpenAPC. Open-Access-Publikationskosten als Open Data

OpenAIRE

Tullney, Marco

2015-01-01

Präsentationsfolien zum Vortrag „OpenAPC. Open-Access-Publikationskosten als Open Data“ in der Session „Ausgestaltung eines wissenschaftsadäquaten APC-Marktes: Grundsätze, Finanzierungsansätze und Management“ der Open-Access-Tage 2015 in Zürich (https://www.open-access.net/community/open-access-tage/open-access-tage-2015-zuerich/programm/#c1974)
Use of repeat anterior maxillary distraction to correct residual midface hypoplasia in cleft patients.

Science.gov (United States)

Richardson, Sunil; Krishna, Shreya; Bansal, Avi

2017-12-01

The study was designed to evaluate the efficacy of performing a second, repeat anterior maxillary distraction (AMD) to treat residual cleft maxillary hypoplasia. Five patients between the ages of 12 to 15 years with a history of AMD and with residual cleft maxillary hypoplasia were included in the study. Inclusion was irrespective of gender, type of cleft lip and palate, and the amount of advancement needed. Repeat AMD was executed in these patients 4 to 5 years after the primary AMD procedure to correct the cleft maxillary hypoplasia that had developed since the initial procedure. Orthopantomogram (OPG) and lateral cephalograms were taken for evaluation preoperatively, immediately after distraction, after consolidation, and one year postoperatively. The data obtained was tabulated and a Mann Whitney U-test was used for statistical comparisons. At the time of presentation, a residual maxillary hypoplasia was observed with a well maintained distraction gap on the OPG which ruled out the occurrence of a relapse. Favorable movement of the segments without any resistance was seen in all patients. Mean maxillary advancement of 10.56 mm was achieved at repeat AMD. Statistically significant increases in midfacial length, SNA angle, and nasion perpendicular to point A distance was achieved ( P =0.012, P =0.011, and P =0.012, respectively). Good profile was achieved for all patients. Minimal transient complications, for example anterior open bite and bleeding episodes, were managed. Addressing the problem of cleft maxillary hypoplasia at an early age (12-15 years) is beneficial for the child. Residual hypoplasia may develop in some patients, which may require additional corrective procedures. The results of our study show that AMD can be repeated when residual deformity develops with the previous procedure having no negative impact on the results of the repeat procedure.
How Good is OpenMP

Directory of Open Access Journals (Sweden)

Timothy G. Mattson

2003-01-01

Full Text Available The OpenMP standard defines an Application Programming Interface (API for shared memory computers. Since its introduction in 1997, it has grown to become one of the most commonly used API's for parallel programming. But success in the market doesn't necessarily imply successful computer science. Is OpenMP a "good" programming environment? What does it even mean to call a programming environment good? And finally, once we understand how good or bad OpenMP is; what can we do to make it even better? In this paper, we will address these questions.
Receptionist input to quality and safety in repeat prescribing in UK general practice: ethnographic case study.

Science.gov (United States)

Swinglehurst, Deborah; Greenhalgh, Trisha; Russell, Jill; Myall, Michelle

2011-11-03

documents or previous research. Yet it was sometimes critical to getting the job done and contributed in subtle ways to safeguarding patients. Conclusion Receptionists and administrative staff make important "hidden" contributions to quality and safety in repeat prescribing in general practice, regarding themselves accountable to patients for these contributions. Studying technology-supported work routines that seem mundane, standardised, and automated, but which in reality require a high degree of local tailoring and judgment from frontline staff, opens up a new agenda for the study of patient safety.
Open Standards, Open Source, and Open Innovation: Harnessing the Benefits of Openness

Science.gov (United States)

Committee for Economic Development, 2006

2006-01-01

Digitization of information and the Internet have profoundly expanded the capacity for openness. This report details the benefits of openness in three areas--open standards, open-source software, and open innovation--and examines the major issues in the debate over whether openness should be encouraged or not. The report explains each of these…
Open coil traction system.

Science.gov (United States)

Vibhute, Pavankumar Janardan

2012-01-01

Sliding mechanics have become a popular method for space closure, with the development of preadjusted edgewise appliances. Furthermore, various space closing auxiliaries have been developed and extensively evaluated for their clinical efficiency. Their effectiveness is enhanced with optimum force magnitude and low load deflection rate/force decay. With the advent of nickel-titanium (Ni-Ti) springs in orthodontics, load deflection rates have been markedly reduced. To use Ni-Ti springs, clinicians have to depend upon prefabricated closed coil springs. The open coil traction system, or open coil retraction spring, is developed utilizing Ni-Ti open coil springs for orthodontic space closure. This article describes the fabrication and clinical application of the open coil traction system, which has a number of advantages. It sustains a low load deflection rate with optimum force magnitude, and its design is adjustable for a desired length and force level. It is fail-safe for both activation and deactivation (ie, it cannot be overactivated, and the decompression limit of the open coil is controlled by the operator). The open coil traction system can be offset from the mucosa to help reduce soft tissue impingement.
High-Dimensional Multivariate Repeated Measures Analysis with Unequal Covariance Matrices

Science.gov (United States)

Harrar, Solomon W.; Kong, Xiaoli

2015-01-01

In this paper, test statistics for repeated measures design are introduced when the dimension is large. By large dimension is meant the number of repeated measures and the total sample size grow together but either one could be larger than the other. Asymptotic distribution of the statistics are derived for the equal as well as unequal covariance cases in the balanced as well as unbalanced cases. The asymptotic framework considered requires proportional growth of the sample sizes and the dimension of the repeated measures in the unequal covariance case. In the equal covariance case, one can grow at much faster rate than the other. The derivations of the asymptotic distributions mimic that of Central Limit Theorem with some important peculiarities addressed with sufficient rigor. Consistent and unbiased estimators of the asymptotic variances, which make efficient use of all the observations, are also derived. Simulation study provides favorable evidence for the accuracy of the asymptotic approximation under the null hypothesis. Power simulations have shown that the new methods have comparable power with a popular method known to work well in low-dimensional situation but the new methods have shown enormous advantage when the dimension is large. Data from Electroencephalograph (EEG) experiment is analyzed to illustrate the application of the results. PMID:26778861
simple sequence repeats (EST-SSR)

African Journals Online (AJOL)

Yomi

2012-01-19

Jan 19, 2012 ... 212 primer pairs selected, based on repeat patterns of n≥8 for di-, tri-, tetra- and penta-nucleotide repeat ... Cluster analysis revealed a high genetic similarity among the sugarcane (Saccharum spp.) breeding lines which could reduce the genetic gain in ..... The multiple allele characteristic of SSR com-.
Nifty Nines and Repeating Decimals

Science.gov (United States)

Brown, Scott A.

2016-01-01

The traditional technique for converting repeating decimals to common fractions can be found in nearly every algebra textbook that has been published, as well as in many precalculus texts. However, students generally encounter repeating decimal numerals earlier than high school when they study rational numbers in prealgebra classes. Therefore, how…
Repeated Prescribed Burning in Aspen

Science.gov (United States)

Donald A. Perala

1974-01-01

Infrequent burning weather, low flammability of the aspen-hardwood association, and prolific sprouting and seeding of shrubs and hardwoods made repeated dormant season burning a poor tool to convert good site aspen to conifers. Repeat fall burns for wildlife habitat maintenance is workable if species composition changes are not important.
OpenPSTD : The open source implementation of the pseudospectral time-domain method

NARCIS (Netherlands)

Krijnen, T.; Hornikx, M.C.J.; Borkowski, B.

2014-01-01

An open source implementation of the pseudospectral time-domain method for the propagation of sound is presented, which is geared towards applications in the built environment. Being a wavebased method, PSTD captures phenomena like diffraction, but maintains efficiency in processing time and memory

OpenPSTD : The open source pseudospectral time-domain method for acoustic propagation

NARCIS (Netherlands)

Hornikx, M.C.J.; Krijnen, T.F.; van Harten, L.

2016-01-01

An open source implementation of the Fourier pseudospectral time-domain (PSTD) method for computing the propagation of sound is presented, which is geared towards applications in the built environment. Being a wave-based method, PSTD captures phenomena like diffraction, but maintains efficiency in
IMPAIRED LEARNING AND ABNORMAL OPEN-FIELD BEHAVIORS OF RATS AFTER EARLY POSTNATAL ANOXIA AND THE BENEFICIAL EFFECT OF THE CALCIUM-ANTAGONIST NIMODIPINE

NARCIS (Netherlands)

NYAKAS, C; MARKEL, E; SCHUURMAN, T; LUITEN, PGM

1991-01-01

Perinatal anoxia/hypoxia is considered a serious risk factor for normal brain development. Anoxia induced by repeated asphyxia at 2 and 4 days after birth resulted in a transient hyperactivity in the small open-field, and a behavioural depression in adult open-field activity of male Wistar rats. The
Rapid development of medical imaging tools with open-source libraries.

Science.gov (United States)

Caban, Jesus J; Joshi, Alark; Nagy, Paul

2007-11-01

Rapid prototyping is an important element in researching new imaging analysis techniques and developing custom medical applications. In the last ten years, the open source community and the number of open source libraries and freely available frameworks for biomedical research have grown significantly. What they offer are now considered standards in medical image analysis, computer-aided diagnosis, and medical visualization. A cursory review of the peer-reviewed literature in imaging informatics (indeed, in almost any information technology-dependent scientific discipline) indicates the current reliance on open source libraries to accelerate development and validation of processes and techniques. In this survey paper, we review and compare a few of the most successful open source libraries and frameworks for medical application development. Our dual intentions are to provide evidence that these approaches already constitute a vital and essential part of medical image analysis, diagnosis, and visualization and to motivate the reader to use open source libraries and software for rapid prototyping of medical applications and tools.
OpenSimRoot: widening the scope and application of root architectural models.

Science.gov (United States)

Postma, Johannes A; Kuppe, Christian; Owen, Markus R; Mellor, Nathan; Griffiths, Marcus; Bennett, Malcolm J; Lynch, Jonathan P; Watt, Michelle

2017-08-01

OpenSimRoot is an open-source, functional-structural plant model and mathematical description of root growth and function. We describe OpenSimRoot and its functionality to broaden the benefits of root modeling to the plant science community. OpenSimRoot is an extended version of SimRoot, established to simulate root system architecture, nutrient acquisition and plant growth. OpenSimRoot has a plugin, modular infrastructure, coupling single plant and crop stands to soil nutrient and water transport models. It estimates the value of root traits for water and nutrient acquisition in environments and plant species. The flexible OpenSimRoot design allows upscaling from root anatomy to plant community to estimate the following: resource costs of developmental and anatomical traits; trait synergisms; and (interspecies) root competition. OpenSimRoot can model three-dimensional images from magnetic resonance imaging (MRI) and X-ray computed tomography (CT) of roots in soil. New modules include: soil water-dependent water uptake and xylem flow; tiller formation; evapotranspiration; simultaneous simulation of mobile solutes; mesh refinement; and root growth plasticity. OpenSimRoot integrates plant phenotypic data with environmental metadata to support experimental designs and to gain a mechanistic understanding at system scales. © 2017 The Authors. New Phytologist © 2017 New Phytologist Trust.
Chromium Renderserver: Scalable and Open Source Remote RenderingInfrastructure

Energy Technology Data Exchange (ETDEWEB)

Paul, Brian; Ahern, Sean; Bethel, E. Wes; Brugger, Eric; Cook,Rich; Daniel, Jamison; Lewis, Ken; Owen, Jens; Southard, Dale

2007-12-01

Chromium Renderserver (CRRS) is software infrastructure thatprovides the ability for one or more users to run and view image outputfrom unmodified, interactive OpenGL and X11 applications on a remote,parallel computational platform equipped with graphics hardwareaccelerators via industry-standard Layer 7 network protocolsand clientviewers. The new contributions of this work include a solution to theproblem of synchronizing X11 and OpenGL command streams, remote deliveryof parallel hardware-accelerated rendering, and a performance analysis ofseveral different optimizations that are generally applicable to avariety of rendering architectures. CRRSis fully operational, Open Sourcesoftware.
The writhe of open and closed curves

International Nuclear Information System (INIS)

Berger, Mitchell A; Prior, Chris

2006-01-01

Twist and writhe measure basic geometric properties of a ribbon or tube. While these measures have applications in molecular biology, materials science, fluid mechanics and astrophysics, they are under-utilized because they are often considered difficult to compute. In addition, many applications involve curves with endpoints (open curves); but for these curves the definition of writhe can be ambiguous. This paper provides simple expressions for the writhe of closed curves, and provides a new definition of writhe for open curves. The open curve definition is especially appropriate when the curve is anchored at endpoints on a plane or stretches between two parallel planes. This definition can be especially useful for magnetic flux tubes in the solar atmosphere, and for isotropic rods with ends fixed to a plane
A repeatedly refuelable mediated biofuel cell based on a hierarchical porous carbon electrode

Science.gov (United States)

Fujita, Shuji; Yamanoi, Shun; Murata, Kenichi; Mita, Hiroki; Samukawa, Tsunetoshi; Nakagawa, Takaaki; Sakai, Hideki; Tokita, Yuichi

2014-05-01

Biofuel cells that generate electricity from renewable fuels, such as carbohydrates, must be reusable through repeated refuelling, should these devices be used in consumer electronics. We demonstrate the stable generation of electricity from a glucose-powered mediated biofuel cell through multiple refuelling cycles. This refuelability is achieved by immobilizing nicotinamide adenine dinucleotide (NAD), an electron-transfer mediator, and redox enzymes in high concentrations on porous carbon particles constituting an anode while maintaining their electrochemical and enzymatic activities after the immobilization. This bioanode can be refuelled continuously for more than 60 cycles at 1.5 mA cm-2 without significant potential drop. Cells assembled with these bioanodes and bilirubin-oxidase-based biocathodes can be repeatedly used to power a portable music player at 1 mW cm-3 through 10 refuelling cycles. This study suggests that the refuelability within consumer electronics should facilitate the development of long and repeated use of the mediated biofuel cells as well as of NAD-based biosensors, bioreactors, and clinical applications.
Scalable Open Source Smart Grid Simulator (SGSim)

DEFF Research Database (Denmark)

Ebeid, Emad Samuel Malki; Jacobsen, Rune Hylsberg; Stefanni, Francesco

2017-01-01

. This paper presents an open source smart grid simulator (SGSim). The simulator is based on open source SystemC Network Simulation Library (SCNSL) and aims to model scalable smart grid applications. SGSim has been tested under different smart grid scenarios that contain hundreds of thousands of households...
Identifying uniformly mutated segments within repeats.

Science.gov (United States)

Sahinalp, S Cenk; Eichler, Evan; Goldberg, Paul; Berenbrink, Petra; Friedetzky, Tom; Ergun, Funda

2004-12-01

Given a long string of characters from a constant size alphabet we present an algorithm to determine whether its characters have been generated by a single i.i.d. random source. More specifically, consider all possible n-coin models for generating a binary string S, where each bit of S is generated via an independent toss of one of the n coins in the model. The choice of which coin to toss is decided by a random walk on the set of coins where the probability of a coin change is much lower than the probability of using the same coin repeatedly. We present a procedure to evaluate the likelihood of a n-coin model for given S, subject a uniform prior distribution over the parameters of the model (that represent mutation rates and probabilities of copying events). In the absence of detailed prior knowledge of these parameters, the algorithm can be used to determine whether the a posteriori probability for n=1 is higher than for any other n>1. Our algorithm runs in time O(l4logl), where l is the length of S, through a dynamic programming approach which exploits the assumed convexity of the a posteriori probability for n. Our test can be used in the analysis of long alignments between pairs of genomic sequences in a number of ways. For example, functional regions in genome sequences exhibit much lower mutation rates than non-functional regions. Because our test provides means for determining variations in the mutation rate, it may be used to distinguish functional regions from non-functional ones. Another application is in determining whether two highly similar, thus evolutionarily related, genome segments are the result of a single copy event or of a complex series of copy events. This is particularly an issue in evolutionary studies of genome regions rich with repeat segments (especially tandemly repeated segments).
CONTENT MANAGEMENT SYSTEMS (CMS OPEN SOURCE WEBSITES

Directory of Open Access Journals (Sweden)

Marinela Lăzărică

2013-01-01

Full Text Available Firms need flexible software applications, which may be adaptable to dynamic changes of the modern business environment; they also need more control over their software costs, security and trust in purchased and implemented software. Moreover, they need to be free of individual software vendors and license costs for the software, etc. The solution of this problem consisted in open source applications and open source technology has proven that it can often provide high-quality software being a challenge for old models of software development and maintenance. The first content management system was announced in the late 90s. The offer of such software systems is varied and each of them has its own characteristics. This requires a comparative analysis of viable open-source systems in order to choose the most appropriate imposed goals. In this context, the paper illustrates the use of an open source content management system, like WordPress, to develop a content site in design of websites and analyzeits characteristics.
A three-barrel repeating pneumatic pellet injector for plasma fueling of the Joint European Torus

International Nuclear Information System (INIS)

Combs, S.K.; Milora, S.L.; Baylor, L.R.; Foust, C.R.; Gethers, F.E.; Sparks, D.O.

1987-01-01

Pellet fueling, the injection of frozen hydrogen isotope pellets at high velocity, has been used to improve plasma performance in various tokamak experiments. In one recent experiment, the repeating pneumatic hydrogen pellet injector was used on the Tokamak Fusion Test Reactor (TFTR). This machine gun-like device, which was developed at the Oak Ridge National Laboratory (ORNL) with an objective of steady-state fueling applications, was characterized by a fixed pellet size and a maximum repetition rate of 4 to 6 Hz for several seconds. It was used to deliver deuterium pellets at speeds ranging from 1.0 to 1.5 km/s into TFTR plasma discharges. In the first experiments, injection of single, large (nominal 4-mm-diam) pellets provided high plasma densities in TFTR (1.8 x 10 14 cm -3 on axis). After a conversion to smaller (nominal 2.7-mm-diam) pellets, the pellet injector was operated in the repeating mode to gradually increase the plasma density, injecting up to five pellets on a single machine pulse. This resulted in central plasma densities approaching 4 x 10 14 cm -3 and n tau values of 1.4 x 10 14 cm -3 s. For plasma fueling applications on the Joint European Torus (JET), a pellet injector fashioned after the prototype repeating pneumatic design has been developed. The versatile injector features three repeating guns in a common vacuum enclosure; the guns provide pellets that are 2.7, 4.0, and 6.0 mm in diameter and can operate independently at repetition rates of 5, 2.5, and 1 Hz, respectively. The injector has been installed on JET. A description of the equipment is presented, emphasizing the differences from the original repeating device. Performance characteristics of the three pneumatic guns are also included
Repeated applications of compost and manure mainly affect the size and chemical nature of particulate organic matter in a loamy soil after 8 years

Science.gov (United States)

Peltre, Clement; Dignac, Marie-France; Doublet, Jeremy; Plante, Alain; Houot, Sabine

2013-04-01

Land application of exogenous organic matter (EOM) of residual origin can help to maintain or increase soil organic carbon (SOC) stocks. However, it remains necessary to quantify and predict the soil C accumulation and to determine under which form the C accumulates. Changes to the chemical composition of soil organic matter (SOM) after repeated applications of composts and farmyard manure were investigated in a field experiment (Qualiagro experiment, Ile-de-France) after 8 years of applications of green waste and sludge compost (GWS), municipal solid waste compost (MSW), biowaste compost (BIOW) or farmyard manure (FYM). The soil was fractionated into particulate organic matter >50 µm (POM), a heavy fraction >50 µm and a 0-50 µm fraction demineralized with hydrofluoric acid (HF). Repeated EOM applications significantly increased total SOC stocks, the C amount in the POM fraction and to a less extent in the 0-50 µm fraction compared to the reference treatment. Compost applications accumulated C preferentially under the form of coarse organic matter of size >50 µm, whereas the FYM accumulated similar C proportions of size >50 µm and 0-50 µm, which was attributed to the presence in the FYM of a fraction of labile C stimulating microbial activity and producing humified by-products together with a fraction of stabilized C directly alimenting the humified fraction of SOC. Pyrolysis-GC/MS and DRIFT spectroscopy revealed enrichment in lignin in the POM fractions of amended soils with GWS, BIOW and FYM. In the soil receiving MSW compost, the pyrolysate of the POM fraction revealed the presence of plastics originating from the MSW compost. A lower C mineralization during laboratory incubation was found for the POM fractions of amended soils compared with the POM from reference soil. This feature was related to a lower ratio of (furfural+acetic acid) / pyrole pyrolysis products in POM of amended vs. reference plots, indicating a higher degree of recalcitrance.. The POM
Orally administered conjugated linoleic acid ameliorates allergic dermatitis induced by repeated applications of oxazolone in mice.

Science.gov (United States)

Nakanishi, Tomonori; Tokunaga, Yuzo; Yamasaki, Masao; Erickson, Laurie; Kawahara, Satoshi

2016-12-01

Conjugated linoleic acid (CLA) is one of the constituents of animal products with possible health benefits such as anti-carcinogenic and anti-obesity effects. In this study, we investigated the immunomodulatory effects of CLA using a mouse model of allergic dermatitis. Mice were orally administered either a CLA mixture containing equal amounts of 9c, 11 t-CLA and 10 t, 12c-CLA, or high linoleic acid safflower oil, and allergic dermatitis was induced on the ear by repeated topical applications of oxazolone. Oral administration of the CLA mixture but not the high linoleic safflower oil attenuated the symptoms of allergic dermatitis in both ear weights and clinical scores. This effect was associated with decreased levels of ear interleukin-4 (IL-4) and plasma immunoglobulin E. The immunomodulatory effects of the CLA isomers were compared by an in vitro cytokine production assay. The results showed that 9c, 11 t-CLA, the most predominant isomer in animal products, significantly inhibited IL-4 and interferon-γ production from mouse splenocytes with similar potency to 10 t, 12c-CLA. These findings suggest that CLA, a constituent of animal products, has a potentially beneficial effect for amelioration of allergic dermatitis. © 2016 Japanese Society of Animal Science.
The Pentapeptide Repeat Proteins

OpenAIRE

Vetting, Matthew W.; Hegde, Subray S.; Fajardo, J. Eduardo; Fiser, Andras; Roderick, Steven L.; Takiff, Howard E.; Blanchard, John S.

2006-01-01

The Pentapeptide Repeat Protein (PRP) family has over 500 members in the prokaryotic and eukaryotic kingdoms. These proteins are composed of, or contain domains composed of, tandemly repeated amino acid sequences with a consensus sequence of [S,T,A,V][D,N][L,F]-[S,T,R][G]. The biochemical function of the vast majority of PRP family members is unknown. The three-dimensional structure of the first member of the PRP family was determined for the fluoroquinolone resistance protein (MfpA) from Myc...
OpenMP for Accelerators

Energy Technology Data Exchange (ETDEWEB)

Beyer, J C; Stotzer, E J; Hart, A; de Supinski, B R

2011-03-15

OpenMP [13] is the dominant programming model for shared-memory parallelism in C, C++ and Fortran due to its easy-to-use directive-based style, portability and broad support by compiler vendors. Similar characteristics are needed for a programming model for devices such as GPUs and DSPs that are gaining popularity to accelerate compute-intensive application regions. This paper presents extensions to OpenMP that provide that programming model. Our results demonstrate that a high-level programming model can provide accelerated performance comparable to hand-coded implementations in CUDA.
Open-ended questions in sensory testing practice

NARCIS (Netherlands)

Piqueras Fiszman, B.

2015-01-01

Why use open-ended questions? This chapter provides an up-to-date overview on the use of open-ended questions in novel rapid sensory methodologies and the potential applications in which they could provide unique benefits. Next, the step-by-step process is described (from task performance to
Open loop thanks to direct torque control (DTC). Motor control without feedback loop; Open loop dank direkter Drehmomentregelung (DTC). Hochwertige Motorregelung ohne Rueckfuehrung

Energy Technology Data Exchange (ETDEWEB)

Link, Michael [ABB Automation Products GmbH, Ladenburg (Germany)

2009-07-01

Servo drives are used in various applications. The range of applications is huge and thus also requirements to the drive system. Mainly, a fast torque and speed control is required. This is the domaine of direct torque control (DTC). In many applications DTC can meet this challenge to control the motor with full torque at zero speed. The servo converter based on DTC technology provides a control concept for synchronous and asynchronous motors for both closed loop and open loop control. DTC controlled drives support the whole range from open loop up to high performance motion control applications. (orig.)
DEIMOS – an Open Source Image Database

Directory of Open Access Journals (Sweden)

M. Blazek

2011-12-01

Full Text Available The DEIMOS (DatabasE of Images: Open Source is created as an open-source database of images and videos for testing, verification and comparing of various image and/or video processing techniques such as enhancing, compression and reconstruction. The main advantage of DEIMOS is its orientation to various application fields – multimedia, television, security, assistive technology, biomedicine, astronomy etc. The DEIMOS is/will be created gradually step-by-step based upon the contributions of team members. The paper is describing basic parameters of DEIMOS database including application examples.
Spaces of Open-source Politics

DEFF Research Database (Denmark)

Husted, Emil; Plesner, Ursula

2017-01-01

. Inspired by the literature on organizational space, the analysis explores how different organizational spaces configure the party’s process of policy development, thereby adding to our understanding of the relationship between organizational space and political organization. We analyze three different....... Curiously, it seems that physical spaces open up the political process, while digital spaces close it down by fixing meaning. Accordingly, we argue that open-source politics should not be equated with online politics but may be highly dependent on physical spaces. Furthermore, digital spaces may provide......The recent proliferation of Web 2.0 applications and their role in contemporary political life have inspired the coining of the term ‘open-source politics’. This article analyzes how open-source politics is organized in the case of a radical political party in Denmark called The Alternative...
OpenChrom: a cross-platform open source software for the mass spectrometric analysis of chromatographic data.

Science.gov (United States)

Wenig, Philip; Odermatt, Juergen

2010-07-30

Today, data evaluation has become a bottleneck in chromatographic science. Analytical instruments equipped with automated samplers yield large amounts of measurement data, which needs to be verified and analyzed. Since nearly every GC/MS instrument vendor offers its own data format and software tools, the consequences are problems with data exchange and a lack of comparability between the analytical results. To challenge this situation a number of either commercial or non-profit software applications have been developed. These applications provide functionalities to import and analyze several data formats but have shortcomings in terms of the transparency of the implemented analytical algorithms and/or are restricted to a specific computer platform. This work describes a native approach to handle chromatographic data files. The approach can be extended in its functionality such as facilities to detect baselines, to detect, integrate and identify peaks and to compare mass spectra, as well as the ability to internationalize the application. Additionally, filters can be applied on the chromatographic data to enhance its quality, for example to remove background and noise. Extended operations like do, undo and redo are supported. OpenChrom is a software application to edit and analyze mass spectrometric chromatographic data. It is extensible in many different ways, depending on the demands of the users or the analytical procedures and algorithms. It offers a customizable graphical user interface. The software is independent of the operating system, due to the fact that the Rich Client Platform is written in Java. OpenChrom is released under the Eclipse Public License 1.0 (EPL). There are no license constraints regarding extensions. They can be published using open source as well as proprietary licenses. OpenChrom is available free of charge at http://www.openchrom.net.

The ToxBank Data Warehouse: Supporting the Replacement of In Vivo Repeated Dose Systemic Toxicity Testing.

Science.gov (United States)

Kohonen, Pekka; Benfenati, Emilio; Bower, David; Ceder, Rebecca; Crump, Michael; Cross, Kevin; Grafström, Roland C; Healy, Lyn; Helma, Christoph; Jeliazkova, Nina; Jeliazkov, Vedrin; Maggioni, Silvia; Miller, Scott; Myatt, Glenn; Rautenberg, Michael; Stacey, Glyn; Willighagen, Egon; Wiseman, Jeff; Hardy, Barry

2013-01-01

The aim of the SEURAT-1 (Safety Evaluation Ultimately Replacing Animal Testing-1) research cluster, comprised of seven EU FP7 Health projects co-financed by Cosmetics Europe, is to generate a proof-of-concept to show how the latest technologies, systems toxicology and toxicogenomics can be combined to deliver a test replacement for repeated dose systemic toxicity testing on animals. The SEURAT-1 strategy is to adopt a mode-of-action framework to describe repeated dose toxicity, combining in vitro and in silico methods to derive predictions of in vivo toxicity responses. ToxBank is the cross-cluster infrastructure project whose activities include the development of a data warehouse to provide a web-accessible shared repository of research data and protocols, a physical compounds repository, reference or "gold compounds" for use across the cluster (available via wiki.toxbank.net), and a reference resource for biomaterials. Core technologies used in the data warehouse include the ISA-Tab universal data exchange format, REpresentational State Transfer (REST) web services, the W3C Resource Description Framework (RDF) and the OpenTox standards. We describe the design of the data warehouse based on cluster requirements, the implementation based on open standards, and finally the underlying concepts and initial results of a data analysis utilizing public data related to the gold compounds. Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.
Effect of Am-80, A Novel Retinoid Derivative, On Contact Hypersensitivity Caused by Repeated Applications of Hapten in Mice

Directory of Open Access Journals (Sweden)

Satoru Niwa

2000-01-01

Full Text Available Some retinoids show an anti-inflammatory action through regulation of transcription of various genes. In the present study, the inhibitory effect of 4-((5,6,7,8- tetrahydro-5,5,8,8-tetramethyl-2-naphthyl carbamoyl benzoic acid (Am-80, a synthetic retinoid, on mouse contact hypersensitivity provoked by repeated applications of 2,4-dinitrofluorobenzene (DNFB to the ear was investigated. Five-fold applications of DNFB on ears once per week elicited severe contact dermatitis with marked infiltration of inflammatory cells and elevation of anti-dinitrophenyl (DNP-IgE antibody in the serum. The Am-80 significantly inhibited ear swelling in a dose-dependent manner. In the histopathologic study, infiltration of inflammatory cells was clearly decreased by Am-80. However, Am-80 did not affect the production of DNP-specific IgE antibody both at the transcriptional and post-transcriptional levels. The effects of Am-80 on the transcriptional level of cytokines, interferon (IFN-γ, interleukin (IL-1 and IL-4 in cervical lymph nodes were investigated. Marked elevation of mRNA for all cytokines was observed and Am-80 potently inhibited the expression of IFN-γ mRNA, but not IL-1 and IL-4 mRNA. These findings indicated that Am-80 may inhibit the contact dermatitis at the post-sensitization phase by inhibiting IFN-γ production at the transcriptional level in mice.
DEVELOPMENT OF A MULTIPLE-LOCUS VARIABLE NUMBER OF TANDEM REPEAT ANALYSIS (MLVA FOR HELICOBACTER PYLORI AND ITS APPLICATION TO HELICOBACTER PYLORI ISOLATES FROM ROSTOV REGION,RUSSIA

Directory of Open Access Journals (Sweden)

Sorokin VM

2012-09-01

Full Text Available Stomach infection with Helicobacter pylori (H. pylori is the second most common infectious disease of humans. The severe pathological consequences of this infection include gastric and duodenal ulcer disease, the development of gastric mucosal atrophy, gastric carcinoma, and, more rarely, malignant tumors of the lymphoma. H. pylori infections cause very high morbidity and mortality and are of particular concern in developing countries, where H. pylori prevalences as high as 90% have been reported. The population of H. pylori shows a high genomic variability among isolates. And the polymorphism of repeat-units of genomics had participated the important process of evolution. A variety of molecular typing tools have been developed to access genetic relatedness in H. pylori isolates. However, there is still no standard genotyping system of this bacterium. The MLVA (Multi-Locus of Variable number of tandem repeat Analysis method is useful for performing phylogenetic analysis and is widely used in bacteria genotyping; however, there's little application in H. pylori analysis. This article is the first application of the MLVA method to investigate H. pylori isolates in Russia. MLVA of 4 VNTR loci with high discrimination power based on 10 candidates were performed on a collection of 22 strains of H. pylori which originated from Rostov region of Russia. This method provides a starting point on which improvements to the method and comparisons to other techniques can be made.
Re-evaluating Open Source for Sustaining Competitive Advantage for Hosted Applications

Directory of Open Access Journals (Sweden)

Daniel Crenna

2010-03-01

Full Text Available The use of open source in hosted solutions is undoubtedly widespread. However, it is seldom considered important in its own right, nor do the majority of hosted solutions providers contribute to or create open source as natural artifacts of doing good business. In this exploration of the nature of hosted solutions and their developers, it is suggested that not only consuming open source, but creating and disseminating it to collaborators and competitors alike, is essential to success. By establishing an open source ecosystem where hosted solutions compete on differentiation rather than lose time and money to concerns that are expected by users, do not add value, and benefit from public scrutiny, hosted solution providers can reduce the cost of their solution, the time it takes to deliver new ones, and improve their quality without additional resources.
Bupleurum falcatum prevents depression and anxiety-like behaviors in rats exposed to repeated restraint stress.

Science.gov (United States)

Lee, Bombi; Yun, Hye-Yeon; Shim, Insop; Lee, Hyejung; Hahm, Dae-Hyun

2012-03-01

Previous studies have demonstrated that repeated restraint stress in rodents produces increases in depression and anxietylike behaviors and alters the expression of corticotrophinreleasing factor (CRF) in the hypothalamus. The current study focused on the impact of Bupleurum falcatum (BF) extract administration on repeated restraint stress-induced behavioral responses using the forced swimming test (FST) and elevated plus maze (EPM) test. Immunohistochemical examinations of tyrosine hydroxylase (TH) expression in rat brain were also conducted. Male rats received daily doses of 20, 50, or 100 mg/kg (i.p.) BF extract for 15 days, 30 min prior to restraint stress (4 h/day). Hypothalamicpituitary- adrenal axis activation in response to repeated restraint stress was confirmed base on serum corticosterone levels and CRF expression in the hypothalamus. Animals that were pre-treated with BF extract displayed significantly reduced immobility in the FST and increased open-arm exploration in the EPM test in comparison with controls. BF also blocked the increase in TH expression in the locus coeruleus of treated rats that experienced restraint stress. Together, these results demonstrate that BF extract administration prior to restraint stress significantly reduces depression and anxiety-like behaviors, possibly through central adrenergic mechanisms, and they suggest a role for BF extract in the treatment of depression and anxiety disorders.
In situ detection of tandem DNA repeat length

Energy Technology Data Exchange (ETDEWEB)

Yaar, R.; Szafranski, P.; Cantor, C.R.; Smith, C.L. [Boston Univ., MA (United States)

1996-11-01

A simple method for scoring short tandem DNA repeats is presented. An oligonucleotide target, containing tandem repeats embedded in a unique sequence, was hybridized to a set of complementary probes, containing tandem repeats of known lengths. Single-stranded loop structures formed on duplexes containing a mismatched (different) number of tandem repeats. No loop structure formed on duplexes containing a matched (identical) number of tandem repeats. The matched and mismatched loop structures were enzymatically distinguished and differentially labeled by treatment with S1 nuclease and the Klenow fragment of DNA polymerase. 7 refs., 4 figs.
"Do-It-Yourself" reliable pH-stat device by using open-source software, inexpensive hardware and available laboratory equipment

Science.gov (United States)

Kragic, Rastislav; Kostic, Mirjana

2018-01-01

In this paper, we present the construction of a reliable and inexpensive pH stat device, by using open-source “OpenPhControl” software, inexpensive hardware (a peristaltic and a syringe pump, Arduino, a step motor…), readily available laboratory devices: a pH meter, a computer, a webcam, and some 3D printed parts. We provide a methodology for the design, development and test results of each part of the device, as well as of the entire system. In addition to dosing reagents by means of a low-cost peristaltic pump, we also present carefully controlled dosing of reagents by an open-source syringe pump. The upgrading of the basic open-source syringe pump is given in terms of pump control and application of a larger syringe. In addition to the basic functions of pH stat, i.e. pH value measurement and maintenance, an improvement allowing the device to be used for potentiometric titration has been made as well. We have demonstrated the device’s utility when applied for cellulose fibers oxidation with 2,2,6,6-tetramethylpiperidine-1-oxyl radical, i.e. for TEMPO-mediated oxidation. In support of this, we present the results obtained for the oxidation kinetics, the consumption of added reagent and experimental repeatability. Considering that the open-source scientific tools are available to everyone, and that researchers can construct and adjust the device according to their needs, as well as, that the total cost of the open-source pH stat device, excluding the existing laboratory equipment (pH meter, computer and glossary) was less than 150 EUR, we believe that, at a small fraction of the cost of available commercial offers, our open-source pH stat can significantly improve experimental work where the use of pH stat is necessary. PMID:29509793
"Do-It-Yourself" reliable pH-stat device by using open-source software, inexpensive hardware and available laboratory equipment.

Science.gov (United States)

Milanovic, Jovana Z; Milanovic, Predrag; Kragic, Rastislav; Kostic, Mirjana

2018-01-01

In this paper, we present the construction of a reliable and inexpensive pH stat device, by using open-source "OpenPhControl" software, inexpensive hardware (a peristaltic and a syringe pump, Arduino, a step motor…), readily available laboratory devices: a pH meter, a computer, a webcam, and some 3D printed parts. We provide a methodology for the design, development and test results of each part of the device, as well as of the entire system. In addition to dosing reagents by means of a low-cost peristaltic pump, we also present carefully controlled dosing of reagents by an open-source syringe pump. The upgrading of the basic open-source syringe pump is given in terms of pump control and application of a larger syringe. In addition to the basic functions of pH stat, i.e. pH value measurement and maintenance, an improvement allowing the device to be used for potentiometric titration has been made as well. We have demonstrated the device's utility when applied for cellulose fibers oxidation with 2,2,6,6-tetramethylpiperidine-1-oxyl radical, i.e. for TEMPO-mediated oxidation. In support of this, we present the results obtained for the oxidation kinetics, the consumption of added reagent and experimental repeatability. Considering that the open-source scientific tools are available to everyone, and that researchers can construct and adjust the device according to their needs, as well as, that the total cost of the open-source pH stat device, excluding the existing laboratory equipment (pH meter, computer and glossary) was less than 150 EUR, we believe that, at a small fraction of the cost of available commercial offers, our open-source pH stat can significantly improve experimental work where the use of pH stat is necessary.
Mechanical properties of regular porous biomaterials made from truncated cube repeating unit cells: Analytical solutions and computational models.

Science.gov (United States)

Hedayati, R; Sadighi, M; Mohammadi-Aghdam, M; Zadpoor, A A

2016-03-01

Additive manufacturing (AM) has enabled fabrication of open-cell porous biomaterials based on repeating unit cells. The micro-architecture of the porous biomaterials and, thus, their physical properties could then be precisely controlled. Due to their many favorable properties, porous biomaterials manufactured using AM are considered as promising candidates for bone substitution as well as for several other applications in orthopedic surgery. The mechanical properties of such porous structures including static and fatigue properties are shown to be strongly dependent on the type of the repeating unit cell based on which the porous biomaterial is built. In this paper, we study the mechanical properties of porous biomaterials made from a relatively new unit cell, namely truncated cube. We present analytical solutions that relate the dimensions of the repeating unit cell to the elastic modulus, Poisson's ratio, yield stress, and buckling load of those porous structures. We also performed finite element modeling to predict the mechanical properties of the porous structures. The analytical solution and computational results were found to be in agreement with each other. The mechanical properties estimated using both the analytical and computational techniques were somewhat higher than the experimental data reported in one of our recent studies on selective laser melted Ti-6Al-4V porous biomaterials. In addition to porosity, the elastic modulus and Poisson's ratio of the porous structures were found to be strongly dependent on the ratio of the length of the inclined struts to that of the uninclined (i.e. vertical or horizontal) struts, α, in the truncated cube unit cell. The geometry of the truncated cube unit cell approaches the octahedral and cube unit cells when α respectively approaches zero and infinity. Consistent with those geometrical observations, the analytical solutions presented in this study approached those of the octahedral and cube unit cells when �
Dynamics of Soil Bacterial Communities in Response to Repeated Application of Manure Containing Sulfadiazine

OpenAIRE

Ding, Guo-Chun; Radl, Viviane; Schloter-Hai, Brigitte; Jechalke, Sven; Heuer, Holger; Smalla, Kornelia; Schloter, Michael

2014-01-01

Large amounts of manure have been applied to arable soils as fertilizer worldwide. Manure is often contaminated with veterinary antibiotics which enter the soil together with antibiotic resistant bacteria. However, little information is available regarding the main responders of bacterial communities in soil affected by repeated inputs of antibiotics via manure. In this study, a microcosm experiment was performed with two concentrations of the antibiotic sulfadiazine (SDZ) which were applied ...
Application of OpenCV in Asus Tinker Board for face recognition

Science.gov (United States)

Chen, Wei-Yu; Wu, Frank; Hu, Chung-Chiang

2017-06-01

The rise of the Internet of Things to promote the development of technology development board, the processor speed of operation and memory capacity increases, more and more applications, can already be completed before the data on the board computing, combined with the network to sort the information after Sent to the cloud for processing, so that the front of the development board is no longer simply retrieve the data device. This study uses Asus Tinker Board to install OpenCV for real-time face recognition and capture of the face, the acquired face to the Microsoft Cognitive Service cloud database for artificial intelligence comparison, to find out what the face now represents the mood. The face of the corresponding person name, and finally, and then through the text of Speech to read the name of the name to complete the identification of the action. This study was developed using the Asus Tinker Board, which uses ARM-based CPUs with high efficiency and low power consumption, plus improvements in memory and hardware performance for the development board.
Repeated growth and bubbling transfer of graphene with millimetre-size single-crystal grains using platinum.

Science.gov (United States)

Gao, Libo; Ren, Wencai; Xu, Huilong; Jin, Li; Wang, Zhenxing; Ma, Teng; Ma, Lai-Peng; Zhang, Zhiyong; Fu, Qiang; Peng, Lian-Mao; Bao, Xinhe; Cheng, Hui-Ming

2012-02-28

Large single-crystal graphene is highly desired and important for the applications of graphene in electronics, as grain boundaries between graphene grains markedly degrade its quality and properties. Here we report the growth of millimetre-sized hexagonal single-crystal graphene and graphene films joined from such grains on Pt by ambient-pressure chemical vapour deposition. We report a bubbling method to transfer these single graphene grains and graphene films to arbitrary substrate, which is nondestructive not only to graphene, but also to the Pt substrates. The Pt substrates can be repeatedly used for graphene growth. The graphene shows high crystal quality with the reported lowest wrinkle height of 0.8 nm and a carrier mobility of greater than 7,100 cm(2) V(-1) s(-1) under ambient conditions. The repeatable growth of graphene with large single-crystal grains on Pt and its nondestructive transfer may enable various applications.
Generalized Bloch Theorem for Complex Periodic Potentials - A Powerful Application to Quantum Transport Calculations

International Nuclear Information System (INIS)

Zhang, Xiaoguang; Varga, Kalman; Pantelides, Sokrates T

2007-01-01

Band-theoretic methods with periodically repeated supercells have been a powerful approach for ground-state electronic structure calculations, but have not so far been adapted for quantum transport problems with open boundary conditions. Here we introduce a generalized Bloch theorem for complex periodic potentials and use a transfer-matrix formulation to cast the transmission probability in a scattering problem with open boundary conditions in terms of the complex wave vectors of a periodic system with absorbing layers, allowing a band technique for quantum transport calculations. The accuracy and utility of the method is demonstrated by the model problems of the transmission of an electron over a square barrier and the scattering of a phonon in an inhomogeneous nanowire. Application to the resistance of a twin boundary in nanocrystalline copper yields excellent agreement with recent experimental data
HTC Vive MeVisLab integration via OpenVR for medical applications.

Science.gov (United States)

Egger, Jan; Gall, Markus; Wallner, Jürgen; Boechat, Pedro; Hann, Alexander; Li, Xing; Chen, Xiaojun; Schmalstieg, Dieter

2017-01-01

Virtual Reality, an immersive technology that replicates an environment via computer-simulated reality, gets a lot of attention in the entertainment industry. However, VR has also great potential in other areas, like the medical domain, Examples are intervention planning, training and simulation. This is especially of use in medical operations, where an aesthetic outcome is important, like for facial surgeries. Alas, importing medical data into Virtual Reality devices is not necessarily trivial, in particular, when a direct connection to a proprietary application is desired. Moreover, most researcher do not build their medical applications from scratch, but rather leverage platforms like MeVisLab, MITK, OsiriX or 3D Slicer. These platforms have in common that they use libraries like ITK and VTK, and provide a convenient graphical interface. However, ITK and VTK do not support Virtual Reality directly. In this study, the usage of a Virtual Reality device for medical data under the MeVisLab platform is presented. The OpenVR library is integrated into the MeVisLab platform, allowing a direct and uncomplicated usage of the head mounted display HTC Vive inside the MeVisLab platform. Medical data coming from other MeVisLab modules can directly be connected per drag-and-drop to the Virtual Reality module, rendering the data inside the HTC Vive for immersive virtual reality inspection.
HTC Vive MeVisLab integration via OpenVR for medical applications.

Directory of Open Access Journals (Sweden)

Jan Egger

Full Text Available Virtual Reality, an immersive technology that replicates an environment via computer-simulated reality, gets a lot of attention in the entertainment industry. However, VR has also great potential in other areas, like the medical domain, Examples are intervention planning, training and simulation. This is especially of use in medical operations, where an aesthetic outcome is important, like for facial surgeries. Alas, importing medical data into Virtual Reality devices is not necessarily trivial, in particular, when a direct connection to a proprietary application is desired. Moreover, most researcher do not build their medical applications from scratch, but rather leverage platforms like MeVisLab, MITK, OsiriX or 3D Slicer. These platforms have in common that they use libraries like ITK and VTK, and provide a convenient graphical interface. However, ITK and VTK do not support Virtual Reality directly. In this study, the usage of a Virtual Reality device for medical data under the MeVisLab platform is presented. The OpenVR library is integrated into the MeVisLab platform, allowing a direct and uncomplicated usage of the head mounted display HTC Vive inside the MeVisLab platform. Medical data coming from other MeVisLab modules can directly be connected per drag-and-drop to the Virtual Reality module, rendering the data inside the HTC Vive for immersive virtual reality inspection.
Open Ephys electroencephalography (Open Ephys + EEG): a modular, low-cost, open-source solution to human neural recording.

Science.gov (United States)

Black, Christopher; Voigts, Jakob; Agrawal, Uday; Ladow, Max; Santoyo, Juan; Moore, Christopher; Jones, Stephanie

2017-06-01

Electroencephalography (EEG) offers a unique opportunity to study human neural activity non-invasively with millisecond resolution using minimal equipment in or outside of a lab setting. EEG can be combined with a number of techniques for closed-loop experiments, where external devices are driven by specific neural signals. However, reliable, commercially available EEG systems are expensive, often making them impractical for individual use and research development. Moreover, by design, a majority of these systems cannot be easily altered to the specification needed by the end user. We focused on mitigating these issues by implementing open-source tools to develop a new EEG platform to drive down research costs and promote collaboration and innovation. Here, we present methods to expand the open-source electrophysiology system, Open Ephys (www.openephys.org), to include human EEG recordings. We describe the equipment and protocol necessary to interface various EEG caps with the Open Ephys acquisition board, and detail methods for processing data. We present applications of Open Ephys + EEG as a research tool and discuss how this innovative EEG technology lays a framework for improved closed-loop paradigms and novel brain-computer interface experiments. The Open Ephys + EEG system can record reliable human EEG data, as well as human EMG data. A side-by-side comparison of eyes closed 8-14 Hz activity between the Open Ephys + EEG system and the Brainvision ActiCHamp EEG system showed similar average power and signal to noise. Open Ephys + EEG enables users to acquire high-quality human EEG data comparable to that of commercially available systems, while maintaining the price point and extensibility inherent to open-source systems.
Open Ephys electroencephalography (Open Ephys + EEG): a modular, low-cost, open-source solution to human neural recording

Science.gov (United States)

Black, Christopher; Voigts, Jakob; Agrawal, Uday; Ladow, Max; Santoyo, Juan; Moore, Christopher; Jones, Stephanie

2017-06-01

Objective. Electroencephalography (EEG) offers a unique opportunity to study human neural activity non-invasively with millisecond resolution using minimal equipment in or outside of a lab setting. EEG can be combined with a number of techniques for closed-loop experiments, where external devices are driven by specific neural signals. However, reliable, commercially available EEG systems are expensive, often making them impractical for individual use and research development. Moreover, by design, a majority of these systems cannot be easily altered to the specification needed by the end user. We focused on mitigating these issues by implementing open-source tools to develop a new EEG platform to drive down research costs and promote collaboration and innovation. Approach. Here, we present methods to expand the open-source electrophysiology system, Open Ephys (www.openephys.org), to include human EEG recordings. We describe the equipment and protocol necessary to interface various EEG caps with the Open Ephys acquisition board, and detail methods for processing data. We present applications of Open Ephys + EEG as a research tool and discuss how this innovative EEG technology lays a framework for improved closed-loop paradigms and novel brain-computer interface experiments. Main results. The Open Ephys + EEG system can record reliable human EEG data, as well as human EMG data. A side-by-side comparison of eyes closed 8-14 Hz activity between the Open Ephys + EEG system and the Brainvision ActiCHamp EEG system showed similar average power and signal to noise. Significance. Open Ephys + EEG enables users to acquire high-quality human EEG data comparable to that of commercially available systems, while maintaining the price point and extensibility inherent to open-source systems.
SU-F-R-35: Repeatability of Texture Features in T1- and T2-Weighted MR Images

International Nuclear Information System (INIS)

Mahon, R; Weiss, E; Karki, K; Hugo, G; Ford, J

2016-01-01

Purpose: To evaluate repeatability of lung tumor texture features from inspiration/expiration MR image pairs for potential use in patient specific care models and applications. Repeatability is a desirable and necessary characteristic of features included in such models. Methods: T1-weighted Volumetric Interpolation Breath-Hold Examination (VIBE) and/or T2-weighted MRI scans were acquired for 15 patients with non-small cell lung cancer before and during radiotherapy for a total of 32 and 34 same session inspiration-expiration breath-hold image pairs respectively. Bias correction was applied to the VIBE (VIBE-BC) and T2-weighted (T2-BC) images. Fifty-nine texture features at five wavelet decomposition ratios were extracted from the delineated primary tumor including: histogram(HIST), gray level co-occurrence matrix(GLCM), gray level run length matrix(GLRLM), gray level size zone matrix(GLSZM), and neighborhood gray tone different matrix (NGTDM) based features. Repeatability of the texture features for VIBE, VIBE-BC, T2-weighted, and T2-BC image pairs was evaluated by the concordance correlation coefficient (CCC) between corresponding image pairs, with a value greater than 0.90 indicating repeatability. Results: For the VIBE image pairs, the percentage of repeatable texture features by wavelet ratio was between 20% and 24% of the 59 extracted features; the T2-weighted image pairs exhibited repeatability in the range of 44–49%. The percentage dropped to 10–20% for the VIBE-BC images, and 12–14% for the T2-BC images. In addition, five texture features were found to be repeatable in all four image sets including two GLRLM, two GLZSM, and one NGTDN features. No single texture feature category was repeatable among all three image types; however, certain categories performed more consistently on a per image type basis. Conclusion: We identified repeatable texture features on T1- and T2-weighted MRI scans. These texture features should be further investigated for use
SU-F-R-35: Repeatability of Texture Features in T1- and T2-Weighted MR Images

Energy Technology Data Exchange (ETDEWEB)

Mahon, R; Weiss, E; Karki, K; Hugo, G [Virginia Commonwealth University, Richmond, VA (United States); Ford, J [University of Miami Miller School of Medicine, Miami, FL (United States)

2016-06-15

Purpose: To evaluate repeatability of lung tumor texture features from inspiration/expiration MR image pairs for potential use in patient specific care models and applications. Repeatability is a desirable and necessary characteristic of features included in such models. Methods: T1-weighted Volumetric Interpolation Breath-Hold Examination (VIBE) and/or T2-weighted MRI scans were acquired for 15 patients with non-small cell lung cancer before and during radiotherapy for a total of 32 and 34 same session inspiration-expiration breath-hold image pairs respectively. Bias correction was applied to the VIBE (VIBE-BC) and T2-weighted (T2-BC) images. Fifty-nine texture features at five wavelet decomposition ratios were extracted from the delineated primary tumor including: histogram(HIST), gray level co-occurrence matrix(GLCM), gray level run length matrix(GLRLM), gray level size zone matrix(GLSZM), and neighborhood gray tone different matrix (NGTDM) based features. Repeatability of the texture features for VIBE, VIBE-BC, T2-weighted, and T2-BC image pairs was evaluated by the concordance correlation coefficient (CCC) between corresponding image pairs, with a value greater than 0.90 indicating repeatability. Results: For the VIBE image pairs, the percentage of repeatable texture features by wavelet ratio was between 20% and 24% of the 59 extracted features; the T2-weighted image pairs exhibited repeatability in the range of 44–49%. The percentage dropped to 10–20% for the VIBE-BC images, and 12–14% for the T2-BC images. In addition, five texture features were found to be repeatable in all four image sets including two GLRLM, two GLZSM, and one NGTDN features. No single texture feature category was repeatable among all three image types; however, certain categories performed more consistently on a per image type basis. Conclusion: We identified repeatable texture features on T1- and T2-weighted MRI scans. These texture features should be further investigated for use
Development and application of a labmade apparatus using open-source “arduino” hardware for the electrochemical pretreatment of boron-doped diamond electrodes

International Nuclear Information System (INIS)

Rosa, Thalles Ramon; Betim, Fernando Silva; Ferreira, Rafael de Queiroz

2017-01-01

characteristics and promote the reproduction of previous voltammograms. This process is often laborious and, when performed manually, cannot ensure system's repeatability. From this perspective, the use of an automatic system can carefully reproduce the electrochemical pretreatment of BDD quickly and efficiently. Thus, this study developed a labmade apparatus to control a BDD electrode pretreatment system for analytical purposes using the open source platform “Arduino”. During 35 electrochemical pretreatments and square wave voltammetry sweeps, the electrochemical system provided repeatable voltammograms for five levels of concentration of gallic acid in 0.5 mol L"−"1 sulfuric acid, according to the AOAC acceptance criteria for repeatability. In addition, it presented other advantages such as low supporting electrolyte consumption (20 mL), a total time for each pretreatment of 80 s and an average cost of production below US$ 200.

IJ-OpenCV: Combining ImageJ and OpenCV for processing images in biomedicine.

Science.gov (United States)

Domínguez, César; Heras, Jónathan; Pascual, Vico

2017-05-01

The effective processing of biomedical images usually requires the interoperability of diverse software tools that have different aims but are complementary. The goal of this work is to develop a bridge to connect two of those tools: ImageJ, a program for image analysis in life sciences, and OpenCV, a computer vision and machine learning library. Based on a thorough analysis of ImageJ and OpenCV, we detected the features of these systems that could be enhanced, and developed a library to combine both tools, taking advantage of the strengths of each system. The library was implemented on top of the SciJava converter framework. We also provide a methodology to use this library. We have developed the publicly available library IJ-OpenCV that can be employed to create applications combining features from both ImageJ and OpenCV. From the perspective of ImageJ developers, they can use IJ-OpenCV to easily create plugins that use any functionality provided by the OpenCV library and explore different alternatives. From the perspective of OpenCV developers, this library provides a link to the ImageJ graphical user interface and all its features to handle regions of interest. The IJ-OpenCV library bridges the gap between ImageJ and OpenCV, allowing the connection and the cooperation of these two systems. Copyright © 2017 Elsevier Ltd. All rights reserved.
The development of an open platform to test ITS solutions

DEFF Research Database (Denmark)

Lahrmann, Harry; Agerholm, Niels; Juhl, Jens

2013-01-01

This paper presents the ITS Platform Northern Denmark, which is an open platform to test ITS solutions. The platform consists of a new developed GNSS/GPRS On Board Unit installed in nearly 500 cars, a backend server and a specially designed digital road map for ITS applications. The platform is o...... is open for third part application. This paper presents the platform’s potentials and explains a series of test applications, which are developed on the plat- form. Moreover, a number of new projects, which are planned for ITS Platform is introduced.......This paper presents the ITS Platform Northern Denmark, which is an open platform to test ITS solutions. The platform consists of a new developed GNSS/GPRS On Board Unit installed in nearly 500 cars, a backend server and a specially designed digital road map for ITS applications. The platform...
Primary blast survival and injury risk assessment for repeated blast exposures.

Science.gov (United States)

Panzer, Matthew B; Bass, Cameron R Dale; Rafaels, Karin A; Shridharani, Jay; Capehart, Bruce P

2012-02-01

The widespread use of explosives by modern insurgents and terrorists has increased the potential frequency of blast exposure in soldiers and civilians. This growing threat highlights the importance of understanding and evaluating blast injury risk and the increase of injury risk from exposure to repeated blast effects. Data from more than 3,250 large animal experiments were collected from studies focusing on the effects of blast exposure. The current study uses 2,349 experiments from the data collection for analysis of the primary blast injury and survival risk for both long- and short-duration blasts, including the effects from repeated exposures. A piecewise linear logistic regression was performed on the data to develop survival and injury risk assessment curves. New injury risk assessment curves uniting long- and short-duration blasts were developed for incident and reflected pressure measures and were used to evaluate the risk of injury based on blast over pressure, positive-phase duration, and the number of repeated exposures. The risk assessments were derived for three levels of injury severity: nonauditory, pulmonary, and fatality. The analysis showed a marked initial decrease in injury tolerance with each subsequent blast exposure. This effect decreases with increasing number of blast exposures. The new injury risk functions showed good agreement with the existing experimental data and provided a simplified model for primary blast injury risk. This model can be used to predict blast injury or fatality risk for single exposure and repeated exposure cases and has application in modern combat scenarios or in setting occupational health limits. .Copyright © 2012 by Lippincott Williams & Wilkins
Open Source Software Acquisition

DEFF Research Database (Denmark)

Holck, Jesper; Kühn Pedersen, Mogens; Holm Larsen, Michael

2005-01-01

Lately we have seen a growing interest from both public and private organisations to adopt OpenSource Software (OSS), not only for a few, specific applications but also on a more general levelthroughout the organisation. As a consequence, the organisations' decisions on adoption of OSS arebecoming...
Monte Carlo simulation of second-generation open-type PET ''single-ring OpenPET'' implemented with DOI detectors

International Nuclear Information System (INIS)

Tashima, Hideaki; Yamaya, Taiga; Hirano, Yoshiyuki; Yoshida, Eiji; Kinouch, Shoko; Watanabe, Mitsuo; Tanaka, Eiichi

2013-01-01

At the National Institute of Radiological Sciences, we are developing OpenPET, an open-type positron emission tomography (PET) geometry with a physically open space, which allows easy access to the patient during PET studies. Our first-generation OpenPET system, dual-ring OpenPET, which consisted of two detector rings, could provide an extended axial field of view (FOV) including the open space. However, for applications such as in-beam PET to monitor the dose distribution in situ during particle therapy, higher sensitivity concentrated on the irradiation field is required rather than a wide FOV. In this report, we propose a second-generation OpenPET geometry, single-ring OpenPET, which can efficiently improve sensitivity while providing the required open space. When the proposed geometry was realized with block detectors, position-dependent degradation of the spatial resolution was expected because it was necessary to arrange the detector blocks in ellipsoidal rings stacked and shifted relative to one another. However, we found by Monte Carlo simulation that the use of depth-of-interaction (DOI) detectors made it feasible to achieve uniform spatial resolution in the FOV. (author)
Repeated treatments with ingenol mebutate for prophylaxis of UV-induced squamous cell carcinoma in hairless mice

DEFF Research Database (Denmark)

Erlendsson, Andrés M; Thaysen-Petersen, Daniel; Bay, Christiane

2016-01-01

BACKGROUND AND AIM: The incidence of squamous cell carcinomas (SCC) is increasing, and effective chemopreventative strategies are needed. We hypothesized that repeated treatments with ingenol mebutate (IngMeb) would postpone development of SCC in hairless mice, and that application...
Repeating pneumatic hydrogen pellet injector for plasma fueling

International Nuclear Information System (INIS)

Combs, S.K.; Milora, S.L.; Foust, C.R.; Foster, C.A.; Schuresko, D.D.

1985-01-01

A repeating pneumatic pellet injector has been developed for plasma fueling applications. The repetitive device extends pneumatic injector operation to steady state. The active mechanism consists of an extruder and a gun assembly that are cooled by flowing liquid-helium refrigerant. The extruder provides a continuous supply of solid hydrogen to the gun assembly, where a reciprocating gun barrel forms and chambers cylindrical pellet from the extrusion; pellets are then accelerated with compressed hydrogen gas (pressures up to 125 bar) to velocities -1 have been obtained with 2.1- , 3.4- , and 4.0-mm-diameter pellets. The present apparatus operates at higher firing rates in short bursts; for example, a rate of 6 s -1 for 2 s with the larger pellets. These pellet parameters are in the range applicable for fueling large present-day fusion devices such as the Tokamak Fusion Test Reactor (TFTR). Experimental results are presented, including effects of propellant pressure and barrel length on gun performance
Digital repeat analysis; setup and operation.

Science.gov (United States)

Nol, J; Isouard, G; Mirecki, J

2006-06-01

Since the emergence of digital imaging, there have been questions about the necessity of continuing reject analysis programs in imaging departments to evaluate performance and quality. As a marketing strategy, most suppliers of digital technology focus on the supremacy of the technology and its ability to reduce the number of repeats, resulting in less radiation doses given to patients and increased productivity in the department. On the other hand, quality assurance radiographers and radiologists believe that repeats are mainly related to positioning skills, and repeat analysis is the main tool to plan training needs to up-skill radiographers. A comparative study between conventional and digital imaging was undertaken to compare outcomes and evaluate the need for reject analysis. However, digital technology still being at its early development stages, setting a credible reject analysis program became the major task of the study. It took the department, with the help of the suppliers of the computed radiography reader and the picture archiving and communication system, over 2 years of software enhancement to build a reliable digital repeat analysis system. The results were supportive of both philosophies; the number of repeats as a result of exposure factors was reduced dramatically; however, the percentage of repeats as a result of positioning skills was slightly on the increase for the simple reason that some rejects in the conventional system qualifying for both exposure and positioning errors were classified as exposure error. The ability of digitally adjusting dark or light images reclassified some of those images as positioning errors.
Local chromatin structure of heterochromatin regulates repeated DNA stability, nucleolus structure, and genome integrity

Energy Technology Data Exchange (ETDEWEB)

Peng, Jamy C. [Univ. of California, Berkeley, CA (United States)

2007-01-01

euchromatin. Remarkably, human euchromatin and fly heterochromatin share similar features; such as repeated DNA content, intron lengths and open reading frame sizes. Human cells likely stabilize their DNA content via mechanisms and factors similar to those in Drosophila heterochromatin. Furthermore, my thesis work raises implications for H3K9me and chromatin functions in complex-DNA genome stability, repeated DNA homogenization by molecular drive, and in genome reorganization through evolution.
Open urethroplasty versus endoscopic urethrotomy - clarifying the management of men with recurrent urethral stricture (the OPEN trial): study protocol for a randomised controlled trial

OpenAIRE

Stephenson, Rachel; Carnell, Sonya; Johnson, Nicola; Brown, Robbie; Wilkinson, Jennifer; Mundy, Anthony; Payne, Steven; Watkin, Nick; N?Dow, James; Sinclair, Andrew; Rees, Rowland; Barclay, Stewart; Cook, Jonathan A.; Goulao, Beatriz; MacLennan, Graeme

2015-01-01

Background Urethral stricture is a common cause of difficulty passing urine in men with prevalence of 0.5?%; about 62,000 men in the UK. The stricture is usually sited in the bulbar part of the urethra causing symptoms such as reduced urine flow. Initial treatment is typically by endoscopic urethrotomy but recurrence occurs in about 60?% of men within 2?years. The best treatment for men with recurrent bulbar stricture is uncertain. Repeat endoscopic urethrotomy opens the narrowing but it usua...
Virtual Hubs for facilitating access to Open Data

Science.gov (United States)

Mazzetti, Paolo; Latre, Miguel Á.; Ernst, Julia; Brumana, Raffaella; Brauman, Stefan; Nativi, Stefano

2015-04-01

In October 2014 the ENERGIC-OD (European NEtwork for Redistributing Geospatial Information to user Communities - Open Data) project, funded by the European Union under the Competitiveness and Innovation framework Programme (CIP), has started. In response to the EU call, the general objective of the project is to "facilitate the use of open (freely available) geographic data from different sources for the creation of innovative applications and services through the creation of Virtual Hubs". In ENERGIC-OD, Virtual Hubs are conceived as information systems supporting the full life cycle of Open Data: publishing, discovery and access. They facilitate the use of Open Data by lowering and possibly removing the main barriers which hampers geo-information (GI) usage by end-users and application developers. Data and data services heterogeneity is recognized as one of the major barriers to Open Data (re-)use. It imposes end-users and developers to spend a lot of effort in accessing different infrastructures and harmonizing datasets. Such heterogeneity cannot be completely removed through the adoption of standard specifications for service interfaces, metadata and data models, since different infrastructures adopt different standards to answer to specific challenges and to address specific use-cases. Thus, beyond a certain extent, heterogeneity is irreducible especially in interdisciplinary contexts. ENERGIC-OD Virtual Hubs address heterogeneity adopting a mediation and brokering approach: specific components (brokers) are dedicated to harmonize service interfaces, metadata and data models, enabling seamless discovery and access to heterogeneous infrastructures and datasets. As an innovation project, ENERGIC-OD will integrate several existing technologies to implement Virtual Hubs as single points of access to geospatial datasets provided by new or existing platforms and infrastructures, including INSPIRE-compliant systems and Copernicus services. ENERGIC OD will deploy a
Network security with openSSL cryptography for secure communications

CERN Document Server

Viega, John; Chandra, Pravir

2002-01-01

Most applications these days are at least somewhat network aware, but how do you protect those applications against common network security threats? Many developers are turning to OpenSSL, an open source version of SSL/TLS, which is the most widely used protocol for secure network communications.The OpenSSL library is seeing widespread adoption for web sites that require cryptographic functions to protect a broad range of sensitive information, such as credit card numbers and other financial transactions. The library is the only free, full-featured SSL implementation for C and C++, and it can be used programmatically or from the command line to secure most TCP-based network protocols.Network Security with OpenSSL enables developers to use this protocol much more effectively. Traditionally, getting something simple done in OpenSSL could easily take weeks. This concise book gives you the guidance you need to avoid pitfalls, while allowing you to take advantage of the library?s advanced features. And, inst...
Nucleophilic ring opening reactions of aziridines.

Science.gov (United States)

Akhtar, Rabia; Naqvi, Syed Ali Raza; Zahoor, Ameer Fawad; Saleem, Sameera

2018-05-04

Aziridine ring opening reactions have gained tremendous importance in the synthesis of nitrogen containing biologically active molecules. During recent years, a great effort has been put forward by scientists toward unique bond construction methodologies via ring opening of aziridines. In this regard, a wide range of chiral metal- and organo-catalyzed desymmetrization reactions of aziridines have been reported with carbon, sulfur, oxygen, nitrogen, halogen, and other nucleophiles. In this review, an outline of methodologies adopted by a number of scientists during 2013-2017 for aziridine ring opening reactions as well as their synthetic applications is described.
Portable LQCD Monte Carlo code using OpenACC

Science.gov (United States)

Bonati, Claudio; Calore, Enrico; Coscetti, Simone; D'Elia, Massimo; Mesiti, Michele; Negro, Francesco; Fabio Schifano, Sebastiano; Silvi, Giorgio; Tripiccione, Raffaele

2018-03-01

Varying from multi-core CPU processors to many-core GPUs, the present scenario of HPC architectures is extremely heterogeneous. In this context, code portability is increasingly important for easy maintainability of applications; this is relevant in scientific computing where code changes are numerous and frequent. In this talk we present the design and optimization of a state-of-the-art production level LQCD Monte Carlo application, using the OpenACC directives model. OpenACC aims to abstract parallel programming to a descriptive level, where programmers do not need to specify the mapping of the code on the target machine. We describe the OpenACC implementation and show that the same code is able to target different architectures, including state-of-the-art CPUs and GPUs.
Cloud based, Open Source Software Application for Mitigating Herbicide Drift

Science.gov (United States)

Saraswat, D.; Scott, B.

2014-12-01

The spread of herbicide resistant weeds has resulted in the need for clearly marked fields. In response to this need, the University of Arkansas Cooperative Extension Service launched a program named Flag the Technology in 2011. This program uses color-coded flags as a visual alert of the herbicide trait technology within a farm field. The flag based program also serves to help avoid herbicide misapplication and prevent herbicide drift damage between fields with differing crop technologies. This program has been endorsed by Southern Weed Science Society of America and is attracting interest from across the USA, Canada, and Australia. However, flags have risk of misplacement or disappearance due to mischief or severe windstorms/thunderstorms, respectively. This presentation will discuss the design and development of a cloud-based, free application utilizing open-source technologies, called Flag the Technology Cloud (FTTCloud), for allowing agricultural stakeholders to color code their farm fields for indicating herbicide resistant technologies. The developed software utilizes modern web development practices, widely used design technologies, and basic geographic information system (GIS) based interactive interfaces for representing, color-coding, searching, and visualizing fields. This program has also been made compatible for a wider usability on different size devices- smartphones, tablets, desktops and laptops.
Analysis of floor technology scheme in open-top construction of nuclear power project

International Nuclear Information System (INIS)

Zhang Shuxia; Lu Qinwu; Han Xiaoping

2014-01-01

Open-top construction is general technology in Ⅲ generation in nuclear power project. Because traditional floor structure and its form board upholding doesn't meet open-top construction, four floor scheme are presented, whose characters, advantages and disadvantages, and its application are summarized. The research results will help to the application of open-top construction. (authors)
Open development networked innovations in international development

CERN Document Server

Reilly, Katherine M A

2014-01-01

The emergence of open networked models made possible by digital technology has the potential to transform international development. Open network structures allow people to come together to share information, organize, and collaborate. Open development harnesses this power, to create new organizational forms and improve people's lives; it is not only an agenda for research and practice but also a statement about how to approach international development. In this volume, experts explore a variety of applications of openness, addressing challenges as well as opportunities. Open development requires new theoretical tools that focus on real world problems, consider a variety of solutions, and recognize the complexity of local contexts. After exploring the new theoretical terrain, the book describes a range of cases in which open models address such specific development issues as biotechnology research, improving education, and access to scholarly publications. Contributors then examine tensions between open model...
Coexistence of 3G repeaters with LTE base stations.

Science.gov (United States)

Yeo, Woon-Young; Lee, Sang-Min; Hwang, Gyung-Ho; Kim, Jae-Hoon

2013-01-01

Repeaters have been an attractive solution for mobile operators to upgrade their wireless networks at low cost and to extend network coverage effectively. Since the first LTE commercial deployment in 2009, many mobile operators have launched LTE networks by upgrading their 3G and legacy networks. Because all 3G frequency bands are shared with the frequency bands for LTE deployment and 3G mobile operators have an enormous number of repeaters, reusing 3G repeaters in LTE networks is definitely a practical and cost-efficient solution. However, 3G repeaters usually do not support spatial multiplexing with multiple antennas, and thus it is difficult to reuse them directly in LTE networks. In order to support spatial multiplexing of LTE, the role of 3G repeaters should be replaced with small LTE base stations or MIMO-capable repeaters. In this paper, a repeater network is proposed to reuse 3G repeaters in LTE deployment while still supporting multilayer transmission of LTE. Interestingly, the proposed network has a higher cluster throughput than an LTE network with MIMO-capable repeaters.
Repeatability & Workability Evaluation of SIGMOD 2009

KAUST Repository

Manegold, Stefan

2010-12-15

SIGMOD 2008 was the first database conference that offered to test submitters\\' programs against their data to verify the repeatability of the experiments published [1]. Given the positive feedback concerning the SIGMOD 2008 repeatability initiative, SIGMOD 2009 modified and expanded the initiative with a workability assessment.
Repeatability & Workability Evaluation of SIGMOD 2009

KAUST Repository

Manegold, Stefan; Manolescu, Ioana; Afanasiev, Loredana; Feng, Jieling; Gou, G.; Hadjieleftheriou, Marios; Harizopoulos, Stavros; Kalnis, Panos; Karanasos, Konstantinos; Laurent, Dominique; Lupu, M.; Onose, N.; Ré , C.; Sans, Virginie; Senellart, Pierre; Wu, T.; Shasha, Dennis E.

2010-01-01

SIGMOD 2008 was the first database conference that offered to test submitters' programs against their data to verify the repeatability of the experiments published [1]. Given the positive feedback concerning the SIGMOD 2008 repeatability initiative, SIGMOD 2009 modified and expanded the initiative with a workability assessment.

The Open AUC Project.

Science.gov (United States)

Cölfen, Helmut; Laue, Thomas M; Wohlleben, Wendel; Schilling, Kristian; Karabudak, Engin; Langhorst, Bradley W; Brookes, Emre; Dubbs, Bruce; Zollars, Dan; Rocco, Mattia; Demeler, Borries

2010-02-01

Progress in analytical ultracentrifugation (AUC) has been hindered by obstructions to hardware innovation and by software incompatibility. In this paper, we announce and outline the Open AUC Project. The goals of the Open AUC Project are to stimulate AUC innovation by improving instrumentation, detectors, acquisition and analysis software, and collaborative tools. These improvements are needed for the next generation of AUC-based research. The Open AUC Project combines on-going work from several different groups. A new base instrument is described, one that is designed from the ground up to be an analytical ultracentrifuge. This machine offers an open architecture, hardware standards, and application programming interfaces for detector developers. All software will use the GNU Public License to assure that intellectual property is available in open source format. The Open AUC strategy facilitates collaborations, encourages sharing, and eliminates the chronic impediments that have plagued AUC innovation for the last 20 years. This ultracentrifuge will be equipped with multiple and interchangeable optical tracks so that state-of-the-art electronics and improved detectors will be available for a variety of optical systems. The instrument will be complemented by a new rotor, enhanced data acquisition and analysis software, as well as collaboration software. Described here are the instrument, the modular software components, and a standardized database that will encourage and ease integration of data analysis and interpretation software.
FRB 121102: A Starquake-induced Repeater?

Science.gov (United States)

Wang, Weiyang; Luo, Rui; Yue, Han; Chen, Xuelei; Lee, Kejia; Xu, Renxin

2018-01-01

Since its initial discovery, the fast radio burst (FRB) FRB 121102 has been found to be repeating with millisecond-duration pulses. Very recently, 14 new bursts were detected by the Green Bank Telescope during its continuous monitoring observations. In this paper, we show that the burst energy distribution has a power-law form which is very similar to the Gutenberg–Richter law of earthquakes. In addition, the distribution of burst waiting time can be described as a Poissonian or Gaussian distribution, which is consistent with earthquakes, while the aftershock sequence exhibits some local correlations. These findings suggest that the repeating FRB pulses may originate from the starquakes of a pulsar. Noting that the soft gamma-ray repeaters (SGRs) also exhibit such distributions, the FRB could be powered by some starquake mechanisms associated with the SGRs, including the crustal activity of a magnetar or solidification-induced stress of a newborn strangeon star. These conjectures could be tested with more repeating samples.
Inverse sex effects on performance of domestic dogs (Canis familiaris) in a repeated problem-solving task.

Science.gov (United States)

Duranton, Charlotte; Rödel, Heiko G; Bedossa, Thierry; Belkhir, Séverine

2015-02-01

The authors investigated differences between female and male pet dogs in physical cognition using an object manipulation task. Subjects (24 females and 23 males of different breeds) had to open a box in order to obtain a food reward during 3 consecutive trials, and latency times before success were measured. Males were significantly more successful in opening the box during the first trial. However, this sex difference was inversed when successful individuals were retested. During the following 2 trials, females were more successful than males, indicating that they were able to improve their skills more quickly once they had managed to succeed for a first time. Sex-specific dynamics in repeated problem-solving tasks might be an important contributor to individual differences in cognitive performance of pet dogs. PsycINFO Database Record (c) 2015 APA, all rights reserved.
Your Personal Analysis Toolkit - An Open Source Solution

Science.gov (United States)

Mitchell, T.

2009-12-01

Open source software is commonly known for its web browsers, word processors and programming languages. However, there is a vast array of open source software focused on geographic information management and geospatial application building in general. As geo-professionals, having easy access to tools for our jobs is crucial. Open source software provides the opportunity to add a tool to your tool belt and carry it with you for your entire career - with no license fees, a supportive community and the opportunity to test, adopt and upgrade at your own pace. OSGeo is a US registered non-profit representing more than a dozen mature geospatial data management applications and programming resources. Tools cover areas such as desktop GIS, web-based mapping frameworks, metadata cataloging, spatial database analysis, image processing and more. Learn about some of these tools as they apply to AGU members, as well as how you can join OSGeo and its members in getting the job done with powerful open source tools. If you haven't heard of OSSIM, MapServer, OpenLayers, PostGIS, GRASS GIS or the many other projects under our umbrella - then you need to hear this talk. Invest in yourself - use open source!
Morphological representation of order-statistics filters.

Science.gov (United States)

Charif-Chefchaouni, M; Schonfeld, D

1995-01-01

We propose a comprehensive theory for the morphological bounds on order-statistics filters (and their repeated iterations). Conditions are derived for morphological openings and closings to serve as bounds (lower and upper, respectively) on order-statistics filters (and their repeated iterations). Under various assumptions, morphological open-closings and close-openings are also shown to serve as (tighter) bounds (lower and upper, respectively) on iterations of order-statistics filters. Simulations of the application of the results presented to image restoration are finally provided.
Induced Voltage in an Open Wire

Science.gov (United States)

Morawetz, K.; Gilbert, M.; Trupp, A.

2017-07-01

A puzzle arising from Faraday's law has been considered and solved concerning the question which voltage will be induced in an open wire with a time-varying homogeneous magnetic field. In contrast to closed wires where the voltage is determined by the time variance of the magnetic field and the enclosed area, in an open wire we have to integrate the electric field along the wire. It is found that the longitudinal electric field with respect to the wave vector contributes with 1/3 and the transverse field with 2/3 to the induced voltage. In order to find the electric fields the sources of the magnetic fields are necessary to know. The representation of a spatially homogeneous and time-varying magnetic field implies unavoidably a certain symmetry point or symmetry line which depend on the geometry of the source. As a consequence the induced voltage of an open wire is found to be the area covered with respect to this symmetry line or point perpendicular to the magnetic field. This in turn allows to find the symmetry points of a magnetic field source by measuring the voltage of an open wire placed with different angles in the magnetic field. We present exactly solvable models of the Maxwell equations for a symmetry point and for a symmetry line, respectively. The results are applicable to open circuit problems like corrosion and for astrophysical applications.
Open Scenario Study, Phase II Report: Assessment and Development of Approaches for Satisfying Unclassified Scenario Needs

Science.gov (United States)

2010-01-01

Oracle) • Mysql (Open Source) • Other What application server software will be needed? • Application Server • CGI PHP /Perl (Open Source...CGI PHP /Perl (Other Open Source software) • ColdFusion (Adobe) • OAS Application Server (Oracle) • .ASP/.NET (Microsoft) • Inmagic DB/textworks I...developers around the world. 9 • Ms Windows® – Microsoft Windows operating system for personal computers • MySQL (Open Source) - the most reliable
Opening the door to innovation in cloud computing

OpenAIRE

Clohessy, Trevor; Acton, Thomas

2013-01-01

peer-reviewed This paper describes research-in-progress that explores the applicability and implications of cloud computing in the creation of business value through open innovation. Both the cloud computing and open innovation paradigms represent recent phenomenon and as such many unanswered questions still persist. In responding to this research gap we propose a new value creation framework which is based on a review of the literature on cloud computing, innovation, open innovation and v...
Open Source, Open Access, Open Review, Open Data. Initiativen zu mehr Offenheit in der digitalen Welt

OpenAIRE

Herb, Ulrich

2011-01-01

The article discusses the principles of openess, open access and open availability of information based on the examples of open access to scientific information, open government data, open geographical data and open source software.
Analysis of repeated measurement data in the clinical trials

Science.gov (United States)

Singh, Vineeta; Rana, Rakesh Kumar; Singhal, Richa

2013-01-01

Statistics is an integral part of Clinical Trials. Elements of statistics span Clinical Trial design, data monitoring, analyses and reporting. A solid understanding of statistical concepts by clinicians improves the comprehension and the resulting quality of Clinical Trials. In biomedical research it has been seen that researcher frequently use t-test and ANOVA to compare means between the groups of interest irrespective of the nature of the data. In Clinical Trials we record the data on the patients more than two times. In such a situation using the standard ANOVA procedures is not appropriate as it does not consider dependencies between observations within subjects in the analysis. To deal with such types of study data Repeated Measure ANOVA should be used. In this article the application of One-way Repeated Measure ANOVA has been demonstrated by using the software SPSS (Statistical Package for Social Sciences) Version 15.0 on the data collected at four time points 0 day, 15th day, 30th day, and 45th day of multicentre clinical trial conducted on Pandu Roga (~Iron Deficiency Anemia) with an Ayurvedic formulation Dhatrilauha. PMID:23930038
Building highly available control system applications with Advanced Telecom Computing Architecture and open standards

International Nuclear Information System (INIS)

Kazakov, Artem; Furukawa, Kazuro

2010-01-01

Requirements for modern and future control systems for large projects like International Linear Collider demand high availability for control system components. Recently telecom industry came up with a great open hardware specification - Advanced Telecom Computing Architecture (ATCA). This specification is aimed for better reliability, availability and serviceability. Since its first market appearance in 2004, ATCA platform has shown tremendous growth and proved to be stable and well represented by a number of vendors. ATCA is an industry standard for highly available systems. On the other hand Service Availability Forum, a consortium of leading communications and computing companies, describes interaction between hardware and software. SAF defines a set of specifications such as Hardware Platform Interface, Application Interface Specification. SAF specifications provide extensive description of highly available systems, services and their interfaces. Originally aimed for telecom applications, these specifications can be used for accelerator controls software as well. This study describes benefits of using these specifications and their possible adoption to accelerator control systems. It is demonstrated how EPICS Redundant IOC was extended using Hardware Platform Interface specification, which made it possible to utilize benefits of the ATCA platform.
Openly Published Environmental Sensing (OPEnS) | Advancing Open-Source Research, Instrumentation, and Dissemination

Science.gov (United States)

Udell, C.; Selker, J. S.

2017-12-01

The increasing availability and functionality of Open-Source software and hardware along with 3D printing, low-cost electronics, and proliferation of open-access resources for learning rapid prototyping are contributing to fundamental transformations and new technologies in environmental sensing. These tools invite reevaluation of time-tested methodologies and devices toward more efficient, reusable, and inexpensive alternatives. Building upon Open-Source design facilitates community engagement and invites a Do-It-Together (DIT) collaborative framework for research where solutions to complex problems may be crowd-sourced. However, barriers persist that prevent researchers from taking advantage of the capabilities afforded by open-source software, hardware, and rapid prototyping. Some of these include: requisite technical skillsets, knowledge of equipment capabilities, identifying inexpensive sources for materials, money, space, and time. A university MAKER space staffed by engineering students to assist researchers is one proposed solution to overcome many of these obstacles. This presentation investigates the unique capabilities the USDA-funded Openly Published Environmental Sensing (OPEnS) Lab affords researchers, within Oregon State and internationally, and the unique functions these types of initiatives support at the intersection of MAKER spaces, Open-Source academic research, and open-access dissemination.
Novel expressed sequence tag- simple sequence repeats (EST ...

African Journals Online (AJOL)

Using different bioinformatic criteria, the SUCEST database was used to mine for simple sequence repeat (SSR) markers. Among 42,189 clusters, 1,425 expressed sequence tag- simple sequence repeats (EST-SSRs) were identified in silico. Trinucleotide repeats were the most abundant SSRs detected. Of 212 primer pairs ...
Evaluation and Testing of Several Free/Open Source Web Vulnerability Scanners

OpenAIRE

Suteva, Natasa; Zlatkovski, Dragi; Mileva, Aleksandra

2013-01-01

Web Vulnerability Scanners (WVSs) are software tools for identifying vulnerabilities in web applications. There are commercial WVSs, free/open source WVSs, and some companies offer them as a Software-as-a-Service. In this paper, we test and evaluate six free/open source WVSs using the web application WackoPicko with many known vulnerabilities, primary for false negative rates.
Perturbative approach to Markovian open quantum systems.

Science.gov (United States)

Li, Andy C Y; Petruccione, F; Koch, Jens

2014-05-08

The exact treatment of Markovian open quantum systems, when based on numerical diagonalization of the Liouville super-operator or averaging over quantum trajectories, is severely limited by Hilbert space size. Perturbation theory, standard in the investigation of closed quantum systems, has remained much less developed for open quantum systems where a direct application to the Lindblad master equation is desirable. We present such a perturbative treatment which will be useful for an analytical understanding of open quantum systems and for numerical calculation of system observables which would otherwise be impractical.
Cutting through - open entries require proper support

Energy Technology Data Exchange (ETDEWEB)

Peng, S.S. [West Virginia University, Morgantown, WV (USA). Mining Engineering Dept.

2000-06-01

The paper explains the applications of open entries in mining and different roof techniques to relieve longwall abutment pressures. The primary support for the open (or cut-through) entries and recovery rooms are normally similar to other development entries in the same mines. The supplementary supports installed can be divided into the following three types: complete backfill of open entries, supplemental roof and/or rib-bolt reinforcement only - no standing support and rows of standing support with or without supplemental roof and/or rib-bolt reinforcement. 3 figs.
Cell_motility: a cross-platform, open source application for the study of cell motion paths

Directory of Open Access Journals (Sweden)

Gevaert Kris

2006-06-01

Full Text Available Abstract Background Migration is an important aspect of cellular behaviour and is therefore widely studied in cell biology. Numerous components are known to participate in this process in a highly dynamic manner. In order to obtain a better insight in cell migration, mutants or drugs are used and their motive phenotype is then linked with the disturbing factors. One of the typical approaches to study motion paths of individual cells relies on fitting mean square displacements to a persistent random walk function. Since the numerous calculations involved often rely on diverse commercial software packages, the analysis can be expensive, labour-intensive and error-prone work. Additionally, due to the nature of algorithms employed the calculations involved are not readily reproducible without access to the exact software package(s used. Results We here present the cell_motility software, an open source Java application under the GNU-GPL license that provides a clear and concise analysis workbench for large amounts of cell motion data. Apart from performing the necessary calculations, the software also visualizes the original motion paths as well as the results of the calculations to help the user interpret the data. The application features an intuitive graphical user interface as well as full user and developer documentation and both source and binary files can be freely downloaded from the project website at http://genesis.UGent.be/cell_motility . Conclusion In providing a free, open source software solution for the automated processing of cell motion data, we aim to achieve two important goals: labs can greatly simplify their data analysis pipeline as switching between different computational software packages becomes obsolete (thus reducing the chances for human error during data manipulation and transfer and secondly, to provide scientists in the field with a freely available common platform to perform their analyses, enabling more efficient
Joint modelling of repeated measurement and time-to-event data: an introductory tutorial.

Science.gov (United States)

Asar, Özgür; Ritchie, James; Kalra, Philip A; Diggle, Peter J

2015-02-01

The term 'joint modelling' is used in the statistical literature to refer to methods for simultaneously analysing longitudinal measurement outcomes, also called repeated measurement data, and time-to-event outcomes, also called survival data. A typical example from nephrology is a study in which the data from each participant consist of repeated estimated glomerular filtration rate (eGFR) measurements and time to initiation of renal replacement therapy (RRT). Joint models typically combine linear mixed effects models for repeated measurements and Cox models for censored survival outcomes. Our aim in this paper is to present an introductory tutorial on joint modelling methods, with a case study in nephrology. We describe the development of the joint modelling framework and compare the results with those obtained by the more widely used approaches of conducting separate analyses of the repeated measurements and survival times based on a linear mixed effects model and a Cox model, respectively. Our case study concerns a data set from the Chronic Renal Insufficiency Standards Implementation Study (CRISIS). We also provide details of our open-source software implementation to allow others to replicate and/or modify our analysis. The results for the conventional linear mixed effects model and the longitudinal component of the joint models were found to be similar. However, there were considerable differences between the results for the Cox model with time-varying covariate and the time-to-event component of the joint model. For example, the relationship between kidney function as measured by eGFR and the hazard for initiation of RRT was significantly underestimated by the Cox model that treats eGFR as a time-varying covariate, because the Cox model does not take measurement error in eGFR into account. Joint models should be preferred for simultaneous analyses of repeated measurement and survival data, especially when the former is measured with error and the association
Caffeine and sleep-deprivation mediated changes in open-field behaviours, stress response and antioxidant status in mice

Directory of Open Access Journals (Sweden)

J. Olakunle Onaolapo

2016-07-01

Conclusion: Repeated caffeine consumption and/or acute sleep-deprivation led to significant changes in pattern of open-field behaviour and stress/antioxidant response in mice. Responses seen in the study are probably due to modulatory effects of caffeine on the total body response to stressful stimuli.
Open and Laparoscopic Colposuspension in Girls with Refractory Urinary Incontinence

Directory of Open Access Journals (Sweden)

Barbara Anna Dobrowolska-Glazar

2017-12-01

Full Text Available IntroductionLower urinary tract symptoms (LUTS are very common in children. Standard treatments consist of urotherapy, antibiotic prophylaxis, anti-muscarinics, physical therapy, and the treatment of coexisting constipation. A small group of girls also present with stress incontinence or with stress-induced urge incontinence. In cases of persistent LUTS due to congenital bladder neck insufficiency (BNI, surgical treatment might be considered. The aim of this paper is to assess the results of open and laparoscopic colposuspension in children with refractory urinary incontinence (UI.Materials and methodsThe results of 18 open and 18 laparoscopic consecutive colposuspensions were analyzed. All patients had UI and failed conservative treatment. BNI was proven by repeated perineal ultrasound and video-urodynamic study. The laparoscopic procedure was performed preperitoneally and the open procedure was via a transverse lower abdominal incision. The same postoperative protocol was used in both groups.ResultsThe mean operation time was 65 min for the open and 90 min for the lap procedure (p < 0.05. Full success was achieved in 7/18 in the open and in 8/18 in the lap group and partial response was seen in 3/18 and in 5/18, respectively (p = 0.64. No intraoperative complications occurred in this cohort.ConclusionOpen and laparoscopic colposuspension can be used to treat refractory UI in children with BNI when non-invasive methods fail.

Repeatability and comparison of clinical techniques for anterior chamber angle assessment.

Science.gov (United States)

Campbell, Peter; Redmond, Tony; Agarwal, Rishi; Marshall, Lewis R; Evans, Bruce J W

2015-03-01

To assess the repeatability of gonioscopy, van Herick method and anterior segment Optical Coherence Tomography (AS-OCT) and determine the agreement between these techniques within a community optometry setting. Gonioscopy, van Herick method and AS-OCT imaging were performed by an optometrist on two occasions, 1 month apart, on 80 subjects aged over 40 years recruited from community optometry practices. Anterior segment images were captured with a spectral domain OCT (Topcon 3D OCT-2000; wavelength 840 nm) set to the Anterior Segment (AS) mode. Eyes were graded as open or occludable for each method. AS-OCT images from both visits were graded by a second optometrist masked to the gonioscopy and van Herick method results, and the visit on which the images were acquired. Cohen's kappa (κ) was used to describe the intra-observer repeatability. Likelihood ratios, sensitivity and specificity of van Herick method and AS-OCT were calculated, using gonioscopy as the reference standard. Measurements were obtained from 80 eyes of 80 subjects. In four cases, AS-OCT images were un-gradable due to difficulty in locating the scleral spur. The repeatability of gonioscopy was fair κ = 0.29, while that of the van Herick method (κ = 0.54) and AS-OCT (κ = 0.47) were somewhat better. The van Herick method showed good sensitivity (visit 1: 75%, visit 2: 69%) and high specificity (visit 1: 88%, visit 2: 96%). The sensitivity of AS-OCT was fair (visit 1: 46%, visit 2: 25%), but specificity was high (visit 1: 87%. visit 2: 89%). Intra-observer repeatability was better for van Herick method and for AS-OCT than for gonioscopy, despite the latter being considered the gold standard method. The van Herick method appeared to be more sensitive than AS-OCT when identifying eyes at risk of angle closure. A standalone anterior segment OCT with a longer wavelength laser could afford better visualisation of the angle, and might therefore be expected to enable the examiner to make more
Proactive interference of open field on consummatory successive negative contrast.

Science.gov (United States)

Justel, Nadia; Pautassi, Ricardo; Mustaca, Alba

2014-03-01

Reactivity to a reward is affected by prior experience with the different reinforcer values of that reward, a phenomenon known as incentive relativity, which can be studied using the consummatory succesive negative contrast (cSNC) paradigm, in which the performance of animals that receive a 4 % sucrose solution after trials on which they were exposed to 32 % sucrose is compared with that of subjects that always receive the 4 % sucrose solution. The exploration of a novel open field can enhance or block the acquisition of associative and nonassociative memories. The effect of open field on cSNC has not yet been explored. The main result of the present study was that open-field exposure significantly modified the expression of cSNC. Exposure to an open field 1 h but not immediately before the downshift interfered with the expression of cSNC. These animals drank more of the downshifted reward than did controls that were not exposed to the apparatus, and this behavior persisted for up to three recovery trials. This phenomenon was observed even when the animals were given a more protracted preshift phase and when the discrepancy between the preshift and shift incentive values of sucrose were increased. An open field also interfered with incentive downshift when open-field exposure occurred 6 h before the downshift, and repeated exposure to the apparatus did not deteriorate this effect. The present study adds to a growing body of literature that indicates that open-field exploration can interfere with memory formation.
Repeatability of heart rate variability in congenital hypothyroidism as analysed by detrended fluctuation analysis

International Nuclear Information System (INIS)

Echeverría, J C; Solís, L I; Pérez, J E; Gaitán, M J; Mandujano, M; Sánchez, M C; González-Camarena, R; Rivera, I R

2009-01-01

The analysis of heart rate fluctuations, or heart rate variability (HRV), may be applied to explore children's neurodevelopment. However, previous studies have reported poor reliability (repeatability) of HRV measures in children at rest and during light exercise. Whether the reliability can be improved by controlling variables such as physical activity, breathing rate and tidal volume, or by selecting non-conventional techniques for analysing the data remains as an open question. We evaluated the short-term repeatability of RR-interval data from medicated children with congenital hypothyroidism (CH). The α 1 exponents, obtained by detrended fluctuation analysis (DFA), from the data of 21 children collected at two different sessions were compared. Elapsed days between sessions were 59 ± 33, and data were obtained during 10 min, trying to restrict the children's activity while being seated. We found statistical agreement between the means of α 1 exponents for each session (p = 0.94) and no bias with a low-coefficient variation (9.1%); an intraclass correlation coefficient ri = 0.48 ([0.14 0.72], 95% confidence interval) was also estimated. These findings, which were compared with results obtained by conventional time and frequency techniques, indicate the existence of agreement between the α 1 exponents obtained at each session, thereby providing support concerning the repeatability of HRV data as analysed by DFA in children with congenital hypothyroidism. Of particular interest was also the agreement found by using the central frequency of the high-frequency band and the parameter pNN20, both showing better or similar ri than α 1 (0.77 [0.57 0.89] and 0.51 [0.17 0.74], respectively), yet considerably better repeatability than other conventional time and frequency parameters
Role of memory errors in quantum repeaters

International Nuclear Information System (INIS)

Hartmann, L.; Kraus, B.; Briegel, H.-J.; Duer, W.

2007-01-01

We investigate the influence of memory errors in the quantum repeater scheme for long-range quantum communication. We show that the communication distance is limited in standard operation mode due to memory errors resulting from unavoidable waiting times for classical signals. We show how to overcome these limitations by (i) improving local memory and (ii) introducing two operational modes of the quantum repeater. In both operational modes, the repeater is run blindly, i.e., without waiting for classical signals to arrive. In the first scheme, entanglement purification protocols based on one-way classical communication are used allowing to communicate over arbitrary distances. However, the error thresholds for noise in local control operations are very stringent. The second scheme makes use of entanglement purification protocols with two-way classical communication and inherits the favorable error thresholds of the repeater run in standard mode. One can increase the possible communication distance by an order of magnitude with reasonable overhead in physical resources. We outline the architecture of a quantum repeater that can possibly ensure intercontinental quantum communication
AtomPy: An Open Atomic Data Curation Environment for Astrophysical Applications

Directory of Open Access Journals (Sweden)

Claudio Mendoza

2014-05-01

Full Text Available We present a cloud-computing environment, referred to as AtomPy, based on Google-Drive Sheets and Pandas (Python Data Analysis Library DataFrames to promote community-driven curation of atomic data for astrophysical applications, a stage beyond database development. The atomic model for each ionic species is contained in a multi-sheet workbook, tabulating representative sets of energy levels, A-values and electron impact effective collision strengths from different sources. The relevant issues that AtomPy intends to address are: (i data quality by allowing open access to both data producers and users; (ii comparisons of different datasets to facilitate accuracy assessments; (iii downloading to local data structures (i.e., Pandas DataFrames for further manipulation and analysis by prospective users; and (iv data preservation by avoiding the discard of outdated sets. Data processing workﬂows are implemented by means of IPython Notebooks, and collaborative software developments are encouraged and managed within the GitHub social network. The facilities of AtomPy are illustrated with the critical assessment of the transition probabilities for ions in the hydrogen and helium isoelectronic sequences with atomic number Z ≤ 10.
COMBS: open source python library for RVE generation - Application to microscale diffusion simulations in cementitious materials

International Nuclear Information System (INIS)

Bourcier, C.; Laucoin, E.; Dridi, W.; Chomat, L.; Bary, B.; Adam, E.

2013-01-01

In the context of radioactive waste storage and disposal, the knowledge of the concrete diffusivity is primordial in the numerical simulations of the long term behavior of these materials. COMBS is an open source python library, it is used to define the shapes of the inclusions, to insert them in the box featuring the representative volume element (RVE) of the cementitious medium, and to assess their diffusive properties. The algorithms developed in COMBS target a fast placement of the inclusions and a fast generation of the RVE shape and mesh. Two application cases are considered: the unaltered material diffusivity and the degraded material diffusivity. The first case of application focuses on the description of the capillary porosity. The second application case focuses on the description of the degradation of cementitious material (mineral and porosity) and the diffusive properties associated. The reliability of the analytical effective medium approximations (MT and SC) is confirmed from 3D finite elements (FE) calculations performed on a matrix-inclusions microstructure obtained by RVE generation with Combs. The results also show the need to take into account the percolation behavior
Bonita Open Solution 5.x essentials

CERN Document Server

Bhat, Rohit

2013-01-01

A practical, intuitive guide for modeling complex business processes as full-scale applications using the ease and power of Bonita Open Solution.If you are a business application developer looking forward to model business processes intuitively in a workflow, with various conditions and transitions then this book is for you. Basic knowledge of Java or Groovy is necessary to help you develop these applications. Knowledge of HTML and JavaScript/JQuery will be helpful but not mandatory.
Ocular surface sensitivity repeatability with Cochet-Bonnet esthesiometer.

Science.gov (United States)

Chao, Cecilia; Stapleton, Fiona; Badarudin, Ezailina; Golebiowski, Blanka

2015-02-01

To determine the repeatability of ocular surface threshold measurements using the Cochet-Bonnet esthesiometer on the same day and 3 months apart. Two separate studies were conducted to determine the repeatability of ocular surface threshold measurements made on the same day (n = 20 subjects) and 3 months apart (n = 29 subjects). The Cochet-Bonnet esthesiometer was used to measure corneal and inferior conjunctival thresholds using the ascending method of limits. The pressure exerted by the Cochet-Bonnet esthesiometer was determined using an analytical balance, for both the 0.08- and 0.12-mm-diameter filaments. This calibration was then used to convert filament length measurements to pressure. Repeatability was determined using a Bland and Altman analysis. The pressure exerted at each filament length differed between the two filament diameters. The measured pressure also differed from values provided by the manufacturer. Repeatability of threshold measurements at the central cornea was shown to be good, with better repeatability for same-day measurements (coefficient of repeatability [CoR] = ±0.23 g/mm²) than for those 3 months apart (CoR = ±0.52 g/mm²). Threshold measurements at the inferior conjunctiva, in contrast, were poorly repeatable (CoR = ±12.78 g/mm²). Cochet-Bonnet esthesiometry is repeatable when performed on the central cornea on the same day and 3 months apart, but this instrument is not recommended for conjunctival threshold measurements.
Safety of Repeated Yttrium-90 Radioembolization

International Nuclear Information System (INIS)

Lam, Marnix G. E. H.; Louie, John D.; Iagaru, Andrei H.; Goris, Michael L.; Sze, Daniel Y.

2013-01-01

Purpose: Repeated radioembolization (RE) treatments carry theoretically higher risk of radiation-induced hepatic injury because of the liver’s cumulative memory of previous exposure. We performed a retrospective safety analysis on patients who underwent repeated RE. Methods: From 2004 to 2011, a total of 247 patients were treated by RE. Eight patients (5 men, 3 women, age range 51–71 years) underwent repeated treatment of a targeted territory, all with resin microspheres (SIR-Spheres; Sirtex, Lane Cove, Australia). Adverse events were graded during a standardized follow-up. In addition, the correlation between the occurrence of RE-induced liver disease (REILD) and multiple variables was investigated in univariate and multivariate analyses in all 247 patients who received RE. Results: Two patients died shortly after the second treatment (at 84 and 107 days) with signs and symptoms of REILD. Both patients underwent whole liver treatment twice (cumulative doses 3.08 and 2.66 GBq). The other 6 patients demonstrated only minor toxicities after receiving cumulative doses ranging from 2.41 to 3.88 GBq. All patients experienced objective tumor responses. In the whole population, multifactorial analysis identified three risk factors associated with REILD: repeated RE (p = 0.036), baseline serum total bilirubin (p = 0.048), and baseline serum aspartate aminotransferase (p = 0.043). Repeated RE proved to be the only independent risk factor for REILD in multivariate analysis (odds ratio 9.6; p = 0.002). Additionally, the administered activity per target volume (in GBq/L) was found to be an independent risk factor for REILD, but only in whole liver treatments (p = 0.033). Conclusion: The risk of REILD appears to be elevated for repeated RE. Objective tumor responses were observed, but establishment of safety limits will require improvement in dosimetric measurement and prediction
Safety of Repeated Yttrium-90 Radioembolization

Energy Technology Data Exchange (ETDEWEB)

Lam, Marnix G. E. H.; Louie, John D. [Stanford University School of Medicine, Division of Interventional Radiology (United States); Iagaru, Andrei H.; Goris, Michael L. [Stanford University School of Medicine, Division of Nuclear Medicine (United States); Sze, Daniel Y., E-mail: dansze@stanford.edu [Stanford University School of Medicine, Division of Interventional Radiology (United States)

2013-10-15

Purpose: Repeated radioembolization (RE) treatments carry theoretically higher risk of radiation-induced hepatic injury because of the liver's cumulative memory of previous exposure. We performed a retrospective safety analysis on patients who underwent repeated RE. Methods: From 2004 to 2011, a total of 247 patients were treated by RE. Eight patients (5 men, 3 women, age range 51-71 years) underwent repeated treatment of a targeted territory, all with resin microspheres (SIR-Spheres; Sirtex, Lane Cove, Australia). Adverse events were graded during a standardized follow-up. In addition, the correlation between the occurrence of RE-induced liver disease (REILD) and multiple variables was investigated in univariate and multivariate analyses in all 247 patients who received RE. Results: Two patients died shortly after the second treatment (at 84 and 107 days) with signs and symptoms of REILD. Both patients underwent whole liver treatment twice (cumulative doses 3.08 and 2.66 GBq). The other 6 patients demonstrated only minor toxicities after receiving cumulative doses ranging from 2.41 to 3.88 GBq. All patients experienced objective tumor responses. In the whole population, multifactorial analysis identified three risk factors associated with REILD: repeated RE (p = 0.036), baseline serum total bilirubin (p = 0.048), and baseline serum aspartate aminotransferase (p = 0.043). Repeated RE proved to be the only independent risk factor for REILD in multivariate analysis (odds ratio 9.6; p = 0.002). Additionally, the administered activity per target volume (in GBq/L) was found to be an independent risk factor for REILD, but only in whole liver treatments (p = 0.033). Conclusion: The risk of REILD appears to be elevated for repeated RE. Objective tumor responses were observed, but establishment of safety limits will require improvement in dosimetric measurement and prediction.
Behaviour and design considerations for continuous flow closed-open-closed liquid microchannels.

Science.gov (United States)

Melin, Jessica; van der Wijngaart, Wouter; Stemme, Göran

2005-06-01

This paper introduces a method of combining open and closed microchannels in a single component in a novel way which couples the benefits of both open and closed microfluidic systems and introduces interesting on-chip microfluidic behaviour. Fluid behaviour in such a component, based on continuous pressure driven flow and surface tension, is discussed in terms of cross sectional flow behaviour, robustness, flow-pressure performance, and its application to microfluidic interfacing. The closed-open-closed microchannel possesses the versatility of upstream and downstream closed microfluidics along with open fluidic direct access. The device has the advantage of eliminating gas bubbles present upstream when these enter the open channel section. The unique behaviour of this device opens the door to applications including direct liquid sample interfacing without the need for additional and bulky sample tubing.
Design of a Short/Open-Ended Slot Antenna with Capacitive Coupling Feed Strips for Hepta-Band Mobile Application

Directory of Open Access Journals (Sweden)

Kyoseung Keum

2018-01-01

Full Text Available In this paper, a planar printed hybrid short/open-ended slot antenna with capacitive coupling feed strips is proposed for hepta-band mobile applications. The proposed antenna is comprised of a slotted ground plane on the top plane and two capacitive coupling feed strips with a chip inductor on the bottom plane. At the low frequency band, the short-ended long slot fed by strip 1 generates its half-wavelength resonance mode, whereas the T-shaped open ended slot fed by strip 2 generates its quarter-wavelength resonance mode for the high frequency band. The antenna provides a wide bandwidth covering GSM850/GSM900/DCS/PCS/UMTS/LTE2300/LTE2500 operation bands. Moreover, the antenna occupies a small volume of 15 mm × 50 mm × 1 mm. The operating principle of the proposed antenna and the simulation/measurement results are presented and discussed.
Molecular identification and characterization of clustered regularly interspaced short palindromic repeats (CRISPRs) in a urease-positive thermophilic Campylobacter sp. (UPTC).

Science.gov (United States)

Tasaki, E; Hirayama, J; Tazumi, A; Hayashi, K; Hara, Y; Ueno, H; Moore, J E; Millar, B C; Matsuda, M

2012-02-01

Novel clustered regularly-interspaced short palindromic repeats (CRISPRs) locus [7,500 base pairs (bp) in length] occurred in the urease-positive thermophilic Campylobacter (UPTC) Japanese isolate, CF89-12. The 7,500 bp gene loci consisted of the 5'-methylaminomethyl-2-thiouridylate methyltransferase gene, putative (P) CRISPR associated (p-Cas), putative open reading frames, Cas1 and Cas2, leader sequence region (146 bp), 12 CRISPRs consensus sequence repeats (each 36 bp) separated by a non-repetitive unique spacer region of similar length (26-31 bp) and the phosphatidyl glycerophosphatase A gene. When the CRISPRs loci in the UPTC CF89-12 and five C. jejuni isolates were compared with one another, these six isolates contained p-Cas, Cas1 and Cas2 within the loci. Four to 12 CRISPRs consensus sequence repeats separated by a non-repetitive unique spacer region occurred in six isolates and the nucleotide sequences of those repeats gave approximately 92-100% similarity with each other. However, no sequence similarity occurred in the unique spacer regions among these isolates. The putative σ(70) transcriptional promoter and the hypothetical ρ-independent terminator structures for the CRISPRs and Cas were detected. No in vivo transcription of p-Cas, Cas1 and Cas2 was confirmed in the UPTC cells.
Dental Fear in Children with Repeated Tooth Injuries.

Science.gov (United States)

Negovetić Vranić, Dubravka; Ivančić Jokić, Nataša; Bakarčić, Danko; Carek, Andreja; Rotim, Željko; Verzak, Željko

2016-06-01

Tooth injuries are serious clinical conditions. Some children experience dental trauma only once, while others are more prone to repeated tooth injuries. Repeated dental trauma occurs in 19.4% to 30% of patients. Pain and dental trauma are the most common reasons for fear and anxiety. The main objective of this study was to investigate how dental trauma, as well as repeated dental trauma affects the occurrence and development of dental fear in children. The study was conducted on a random sample of 147 subjects (88 boys and 59 girls) aged 5-8 and 9-12 years. Subjects in both age groups were divided into subroups without dental trauma, with one dental trauma and with repeated dental trauma. The validated Children’s Fear Survey Schedule – Dental Subscale was used on fear assessment. Results showed that only 12.2% of children without trauma, 33.3% with one trauma and 51.7% with repeated trauma were not afraid of injection. Older children had a significantly lower fear of injections, touch of an unknown person, choking, going to the hospital and people in white uniforms. Dentist was not the cause of fear in 65.5% of patients with repeated trauma. With each repeated injury of teeth, the degree of their fear of dental treatment was lower.
Erroneous Memories Arising from Repeated Attempts to Remember

Science.gov (United States)

Henkel, Linda A.

2004-01-01

The impact of repeated and prolonged attempts at remembering on false memory rates was assessed in three experiments. Participants saw and imagined pictures and then made repeated recall attempts before taking a source memory test. Although the number of items recalled increased with repeated tests, the net gains were associated with more source…
Structures of closed and open conformations of dimeric human ATM

Science.gov (United States)

Baretić, Domagoj; Pollard, Hannah K.; Fisher, David I.; Johnson, Christopher M.; Santhanam, Balaji; Truman, Caroline M.; Kouba, Tomas; Fersht, Alan R.; Phillips, Christopher; Williams, Roger L.

2017-01-01

ATM (ataxia-telangiectasia mutated) is a phosphatidylinositol 3-kinase–related protein kinase (PIKK) best known for its role in DNA damage response. ATM also functions in oxidative stress response, insulin signaling, and neurogenesis. Our electron cryomicroscopy (cryo-EM) suggests that human ATM is in a dynamic equilibrium between closed and open dimers. In the closed state, the PIKK regulatory domain blocks the peptide substrate–binding site, suggesting that this conformation may represent an inactive or basally active enzyme. The active site is held in this closed conformation by interaction with a long helical hairpin in the TRD3 (tetratricopeptide repeats domain 3) domain of the symmetry-related molecule. The open dimer has two protomers with only a limited contact interface, and it lacks the intermolecular interactions that block the peptide-binding site in the closed dimer. This suggests that the open conformation may be more active. The ATM structure shows the detailed topology of the regulator-interacting N-terminal helical solenoid. The ATM conformational dynamics shown by the structures represent an important step in understanding the enzyme regulation. PMID:28508083
Application of Open Source Software by the Lunar Mapping and Modeling Project

Science.gov (United States)

Ramirez, P.; Goodale, C. E.; Bui, B.; Chang, G.; Kim, R. M.; Law, E.; Malhotra, S.; Rodriguez, L.; Sadaqathullah, S.; Mattmann, C. A.; Crichton, D. J.

2011-12-01

The Lunar Mapping and Modeling Project (LMMP), led by the Marshall Space Flight center (MSFC), is responsible for the development of an information system to support lunar exploration, decision analysis, and release of lunar data to the public. The data available through the lunar portal is predominantly derived from present lunar missions (e.g., the Lunar Reconnaissance Orbiter (LRO)) and from historical missions (e.g., Apollo). This project has created a gold source of data, models, and tools for lunar explorers to exercise and incorporate into their activities. At Jet Propulsion Laboratory (JPL), we focused on engineering and building the infrastructure to support cataloging, archiving, accessing, and delivery of lunar data. We decided to use a RESTful service-oriented architecture to enable us to abstract from the underlying technology choices and focus on interfaces to be used internally and externally. This decision allowed us to leverage several open source software components and integrate them by either writing a thin REST service layer or relying on the API they provided; the approach chosen was dependent on the targeted consumer of a given interface. We will discuss our varying experience using open source products; namely Apache OODT, Oracle Berkley DB XML, Apache Solr, and Oracle OpenSSO (now named OpenAM). Apache OODT, developed at NASA's Jet Propulsion Laboratory and recently migrated over to Apache, provided the means for ingestion and cataloguing of products within the infrastructure. Its usage was based upon team experience with the project and past benefit received on other projects internal and external to JPL. Berkeley DB XML, distributed by Oracle for both commercial and open source use, was the storage technology chosen for our metadata. This decision was in part based on our use Federal Geographic Data Committee (FGDC) Metadata, which is expressed in XML, and the desire to keep it in its native form and exploit other technologies built on
Instant OpenCV for iOS

CERN Document Server

Kornyakov, Kirill

2013-01-01

Filled with practical, step-by-step instructions and clear explanations for the most important and useful tasks. This book uses a very practical approach, with each recipe and their associated sample projects or examples focusing on a particular aspect of the technology.This book is intended for OpenCV developers who are interested in porting their applications to the iOS platform. Basic experience with OpenCV, computer vision, Objective C, and other iOS tools is encouraged.
Open access, open education resources and open data in Uganda ...

African Journals Online (AJOL)

As a follow up to OpenCon 2014, International Federation of Medical Students' Associations (IFMSA) students organized a 3 day workshop Open Access, Open Education Resources and Open Data in Kampala from 15-18 December 2014. One of the aims of the workshop was to engage the Open Access movement in ...
Estimating prognosis at the time of repeat whole brain radiation therapy for multiple brain metastases: The reirradiation score

Directory of Open Access Journals (Sweden)

Natalie Logie, MD

2017-07-01

Conclusions: In the largest reported cohort to receive repeat WBRT, application of the RPA score was not predictive of MS. The new ReRT score is a simple tool based on readily available clinical information.

Some links on this page may take you to non-federal websites. Their policies may differ from this site.