WorldWideScience

Sample records for renovated loose housing

  1. Renovation of social housing

    DEFF Research Database (Denmark)

    Jensen, Stina Rask; Hvejsel, Marie Frier; Kirkegaard, Poul Henning

    consumption in the building sector. This planned transformation towards a more energy-efficient building mass involves changes in the building envelope and, as such, is likely to influence the experience of the built environment dramatically, both interior and exterior. Recent research shows, however...... in the renovation of social housing. Methodologically, this hypothesis is investigated by re-reading the task of energy renovation through the lens of tectonic architectural theory. Specifically, Eduard Sekler’s etymological distinction between structure, construction, and tectonics is developed as a framework...... for addressing the spatial implications and potentials of technical initiatives in contemporary energy renovations within the continuum described by Scott. The framework is applied in two case studies of recent energy renovations of social housing dwellings. Finally, the paper discusses whether the technical...

  2. Energy Efficient Renovation of Social Housing

    DEFF Research Database (Denmark)

    Bech-Nielsen, Grith; Christiansen, Michael

    In years to come the social housing sector (SH) must undergo renovation. The SH is out of step with modern requirements when it comes to plan arrangements, energy frame calcu-lation, flexible building services and social challenges. A way to solve such challenges in an environmentally, economically......, such as residents, housing administration, politicians, advi-sors, producers and contractors. Secondly we present follow up methods for developing an overall future energy renova-tion SH strategy. Our project contributes to the building sector by suggesting new methods for meeting challenges concerning energy......), (2) workshops and (3) seminars for qualifying (4) the definition of a common framework for (5) the development and (6) acceptance of the actual energy renovation strategy, which will then be transformed into action plans in the form of (7) ”common screening” of housing and housing areas as a basis...

  3. Existing sustainable renovation concepts for single-family houses

    DEFF Research Database (Denmark)

    Tommerup, Henrik M.; Vanhoutteghem, Lies; Svendsen, Svend

    2010-01-01

    In the Nordic Innovation Centre Project, SuccessFamilies, the main objective is to change the business environment in order to speed up the implementation of sustainable renovation of single-family houses – proposing new service concepts that will combine both the technical solutions, financing...... with individual solutions, traditional warehouses ”do-it-yourself-shops” and some actors marketing single products. To speed up the implementation of sustainable renovation of single-family houses there is a great need for full-service packages. Existing technical renovation concepts, typically focusing...... services as well as other promoting issues to overcome the behavioural, organizational, legal and social barriers that exist in sustainable renovation. A starting point for such a change has been to get an overview of the existing sustainable renovation concepts, i.e. full-service concepts and technical...

  4. Collaboration opportunities in advanced housing renovation

    DEFF Research Database (Denmark)

    Mlecnik, Erwin; Kondratenko, Irena; Cré, Johan

    2012-01-01

    demand for integrated renovations has to be stimulated. A research and networking methodology was developed within the framework of the One Stop Shop project to identify and develop collaboration opportunities for advanced housing renovation in Belgium, Denmark, Finland and Norway. The research...... identified key supply-side needs through interviews and questionnaires, and analysed important elements for the development of a web-based portal that can connect supply and demand. The project further developed ideas and methods for collaboration and business model generation between different players...... on the renovation market. These different research results contributed to defining new business opportunities related to process innovation to unburden the homeowner and to achieve less fragmented renovation processes...

  5. Energy Renovation of Danish Single-Family Houses

    DEFF Research Database (Denmark)

    Mortensen, Andrea

    2015-01-01

    . The results show that despite the barriers the owners can in fact be motivated to perform private energy renovations. A sound project economy is all-important for this to happen and it should if possible be supported by improvements in both comfort, indoor environment and architecture to increase......The PhD project is based on requirements from the European Union to reduce the energy consumption and on current renovation needs of and a huge energy saving potential in the Danish single-family houses from the 1960’s and 1970’s. The project focuses on the barriers for energy renovations...... of these houses and on defining motivation factors for the homeowners. The barriers are many and variating in influence and studies show that both professionals and homeowners are affected. The barriers range from lack of interest and knowledge to uncertainties about among others economy and technical solutions...

  6. Energy savings from housing: Ineffective renovation subsidies vs efficient demolition and reconstruction incentives

    International Nuclear Information System (INIS)

    Dubois, Maarten; Allacker, Karen

    2015-01-01

    Energy savings in the housing sector are key to reduce global greenhouse gas emissions. Policies to incentivize energy savings are however disparate between countries. Taking into account environmental aspects and consumer surplus, the paper uses a stylized economic model to assess the effectiveness and efficiency of three economic instruments: subsidies for renovation, subsidies for demolition and reconstruction projects and subsidies for building new houses on virgin land. The assessment also relates to differentiated value added taxes and other financial incentives such as green loans. In a counter-intuitive way, the model highlights that subsidies for renovations with minor energy gains worsen the overall energy consumption of housing due to the inducement of lock-ins with energy inefficient houses. Structural changes are needed in the use of policy instruments. First, commonly applied support schemes for renovations with minor energy savings should be abolished. Second, scarce public resources should incentivize deep renovation and demolition and reconstruction. Finally, taxes should apply on the use of virgin land to persuade households with a high willingness to pay for a new house, to invest in demolition and reconstruction. - Highlights: • Renovation subsidies worsen overall energy consumption of housing. • Renovation induces a lock-in with energy inefficient houses. • Renovation subsidies should be abolished or structurally reformed. • Policy should incentivize demolition and reconstruction projects. • Building on virgin land should be taxed.

  7. The contribution of housing renovation to children’s blood lead levels: a cohort study

    Science.gov (United States)

    2013-01-01

    Background Routine renovation of older housing is a risk factor for childhood lead poisoning, but the contribution to children’s blood lead levels is poorly defined for children with lower exposure levels. Methods We examined a prospective cohort of 276 children followed from 6 to 24 months of age. We conducted surveys of renovation activities and residential lead hazards and obtained blood lead level (B-Pb) every six months. We analyzed B-Pb in a repeated measures design using a mixed effects linear model. Results Parent reported interior renovation ranged from 11 to 25% of housing units at the four, 6-month periods. In multivariable analysis, children whose housing underwent interior renovation had a 12% higher mean B-Pb by two years of age compared with children whose housing units were not renovated (p children in non-renovated housing, children whose housing units underwent renovation in the prior month had a 17% higher mean B-Pb at two years of age, whereas children whose housing renovation occurred in the prior 2–6 months had an 8% higher mean B-Pb. We also found an association between higher paint lead loading, measured using an X-ray fluorescence (XRF) based paint lead index, and child B-Pb (p = 0.02); for every 10 mg/cm2 increase in paint lead loading index there was a 7.5% higher mean childhood B-Pb. Conclusions In an analysis of data collected before the recent changes to Environmental Protection Agency’s Lead, Renovation, Repair and Painting Rule, routine interior housing renovation was associated with a modest increase in children’s B-Pb. These results are important for the provision of clinical advice, for housing and public health professionals, and for policymakers. PMID:23981571

  8. The Use of UAV in Housing Renovation Identification: A Case Study at Taman Manis 2

    Science.gov (United States)

    Mustaffa, A. A.; Hasmori, M. F.; Sarif, A. S.; Ahmad, N. F.; Zainun, N. Y.

    2018-04-01

    Housing industry in Malaysia is growing rapidly due to the increase in population and the arising of economic level of Malaysian people. Most residential houses are built according to the standard residential design that may lead to house renovation by the buyers after purchasing the house. A method of using Unmanned Aerial Vehicle (UAV) monitoring was used to obtain information of the renovated houses directly on-site at Taman Manis 2, Parit Raja, Batu Pahat. Through comparison of image captured by the UAV with the original house plans, we found out that a total of 160 units out of 336 units of houses undergo a renovation process. Surprisingly, 41 units have been renovated illegally which has 40% to 96% of renovation rate. The acquired data were analyzed and can be concluded that the method of using UAVs to obtain information is highly recommended. The study is expected to help Municipal Council to detect improper & illegal renovation by the residents in a residential area.

  9. Sustainable renovation concepts for single-family houses

    DEFF Research Database (Denmark)

    Vanhoutteghem, Lies; Tommerup, Henrik M.; Svendsen, Svend

    , the financial possibilities of the homeowner etc. Calculation of packages of energy efficient renovation solutions targeted the three segments of houses show that primary energy use and heating bill can be reduced with up to about 75% or a factor 4 corresponding to the level of a new house or better. It seems...... that the passive house level can not quite be reached with standard solutions. They require that more ambitious measures are applied. The total investment needed to reduce the heating bill by a factor 4 including replacement of e.g. roof and windows is up to EUR 100,000. It is generally difficult to obtain...... be seen as a possibility to make it easy for the homeowner to comply with possible future requirements to realize far-reaching energy savings in connection with extensive renovations, provided that the building sector offers the solutions. Homeowners need someone to take care of all relevant steps...

  10. Full-service concept for energy efficient renovation of single-family houses

    DEFF Research Database (Denmark)

    Vanhoutteghem, Lies; Tommerup, Henrik M.; Svendsen, Svend

    2011-01-01

    the solutions. Such one-stop-shops in the form of full-service providers of energy efficient renovation of single-family house are missing in the Nordic countries, although this service is vital to open up the market. As part of the Nordic research project `SuccesFamilies´ with the purpose to change...... houses. A one-stop-shop in the form of a full-service concept could be seen as a possibility to make it easy for the homeowner to comply with possible future requirements to realize far-reaching energy savings in connection with extensive renovations, provided that the building sector offers...... includes an ideal full-service concept and technical renovation solutions targeted to different types of single-family houses....

  11. IEA SHC Task 37: advanced housing renovation - Final report; IEA SHC Task 37: advanced housing renovation - Schlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Hastings, R.

    2010-01-15

    This final report for the Swiss Federal Office of Energy (SFOE) reports on work done within the framework of the International Energy Agency's Solar Heating and Cooling program. The project addressed the energy consumption of residential buildings and their renovation. The report discusses the goals set for the project and reports on five projects that were initiated. These include the refurbishment of apartment buildings to meet the 'Passive House' standard, air-tightness, potential for the use of solar energy, solar facades and the renovation of historic listed buildings. Conclusions resulting from these projects are presented and discussed.

  12. Using a One-Stop-Shop Concept to Guide Decisions when Single-Family Houses are renovated

    DEFF Research Database (Denmark)

    Grøn Bjørneboe, Matilde; Svendsen, Svend; Heller, Alfred

    2017-01-01

    of renovation. The scope of the project was to carry out renovations on up to three houses. The project revealed that the concept on its own was not enough to motivate the house owners to engage in extensive renovation. However, interviews with the house owners indicated that the renovations that took place had...... was to determine how a one-stop-shop (OSS) or full-service concept could be used to guide the extensive energy renovation of single-family houses. The purpose was partly to identify the benefits and disadvantages of using the concept and partly to evaluate the potential of the OSS concept for increasing the degree...... probably been expanded and improved with the use of the concept and that the renovations in general benefitted from an independent adviser....

  13. How to get residents/owners in housing cooperatives to agree on sustainable renovation

    Energy Technology Data Exchange (ETDEWEB)

    Lappegard Hauge, A. [SINTEF Building and Infrastructure, P.O. Box 124, Blindern, 0314 Oslo (Norway); Thomsen, J. [SINTEF Building and Infrastructure, 7465 Trondheim (Norway); Loefstroem, E. [SINTEF Building and Infrastructure, 7491 Trondheim (Norway)

    2013-05-15

    What factors increase the chance that residents/owners in housing cooperatives agree on sustainable energy efficient renovation? Based on 30 qualitative interviews with professional advisors in cooperative housing associations and chairman/board and residents in three chosen case studies, an analysis of opportunities and barriers for making a common decision on renovation is performed. Success criteria and barriers are found on the societal level as well as on the organizational/individual level. The barriers and success criteria identified on the societal level are: knowledge level on energy-efficient renovation among relevant actors, owner structure of the housing cooperative, and existing regulations and incentives. On the organizational and individual level, the following categories influencing renovation processes were identified: the time frame and organization of the process, understanding the residents' needs, economy, the information given, and the existence of available exemplary projects and role models. Based on the results of the study, ten guidelines that contribute to more successful decision making processes and increase the chances of sustainable energy efficient renovation in housing cooperatives are presented.

  14. Business models for full service energy renovation of single-family houses in Nordic countries

    International Nuclear Information System (INIS)

    Mahapatra, Krushna; Gustavsson, Leif; Haavik, Trond; Aabrekk, Synnøve; Svendsen, Svend; Vanhoutteghem, Lies; Paiho, Satu; Ala-Juusela, Mia

    2013-01-01

    Highlights: ► In the Nordic countries there is significant primary energy saving potential in single-family houses from 1970s. ► There are several behavioral, economical and market related hindrances to adoption of energy efficiency measures. ► One-stop-shop business models to offer full service energy renovation packages are slowly emerging. ► Marketing strategies and policy measures are required to promote full service energy renovation of single-family house. - Abstract: In Nordic countries significant primary energy saving potential exists in houses built before 1980. These old houses need to be renovated, which provides an opportunity for implementation of energy efficiency measures. However, there are several economic and market hindrances and the renovation markets are dominated by handicraft-based individual solutions. In this paper we have analyzed the opportunities for implementation of one-stop-shop business models where an overall contractor offers full-service renovation packages including consulting, independent energy audit, renovation work, follow-up (independent quality control and commissioning) and financing. A comparative assessment of emerging business models in the Nordic countries shows that different types of actors can provide such a service. Financing is included in some models. There are differences in how customers are contacted, while the similarities are on how the service is provided. Even though there is strong business potential for one-stop-shop energy renovation concept, still it has been somewhat difficult to start or run such a business. Various options to overcome the hindrances to promote energy efficient renovation of detached houses are discussed

  15. Chances and barriers for passive house renovations

    NARCIS (Netherlands)

    Mlecnik, E.; Opstelten, I.; Rovers, R.; Verdeyen, N.; Wagenaar, A.

    2016-01-01

    There is significant potential for carbon reduction and energy saving in residential buildings. Various market actors are looking for ways to increase the uptake of passive house renovation and its certification.
    This study aimed specifically to draw lessons from research projects towards the

  16. On the Testing of Renovations Inside Historical Opera Houses

    Science.gov (United States)

    Fausti, P.; Prodi, N.

    2002-11-01

    Due to the large number of historical opera houses in Italy, many theatres have been renovated in the past, but still more will undergo major restoration in the near future. Unfortunately in this context, the quality and protection of acoustics is rarely considered as an issue of its own. As a consequence, the renovations are hardly ever accompanied by proper scientific and technical support. In this paper, the acoustical impact of works inside the Teatro Municipale "R.Valli" in Reggio Emilia, including the restoration of the main hall and the construction of a new acoustic shell, will be dealt with. Surveys were held in the theatre before renovation and were repeated with identical procedure and instruments after its completion. By means of a comparative analysis of the architectural project and of acoustical data, the impact of major changes in the theatre can be predicted. It is shown that this approach can help in drafting an operational scheme for safeguarding the acoustics of historical opera houses.

  17. Method for planning extensive energy renovation of detached single-family houses

    DEFF Research Database (Denmark)

    Grøn Bjørneboe, Matilde

    , and 22% occurs in single-family houses, making this the largest single contributor to the total consumption after road transport (DEA, 2015a). There is a large potential for achieving energy savings in this sector, especially among the large number of single-family houses built in the 1960s and 1970s...... that the use of this approach produced a better renovation with a larger energy saving. The initial evaluation helped the house owners identify a maintenance backlog, and the use of an independent advisor helped ensure quality throughout the process. Renovations are too often carried out for just one purpose......: maintenance, to update functions or to reduce energy consumption. But a lot can be gained by combining these efforts, which can reduce expenses for planning and execution and avoid doing things twice. Research for this thesis demonstrated this approach by carrying out a renovation based on maintenance...

  18. Integrated project delivery methods for energy renovation of social housing

    Directory of Open Access Journals (Sweden)

    Tadeo Baldiri Salcedo Rahola

    2015-11-01

    Full Text Available Optimised project delivery methods forsocial housing energy renovations European Social Housing Organisations (SHOs are currently facing challenging times. The ageing of their housing stock and the economic crisis, which has affected both their finances and the finances of their tenants, are testing their capacity to stick to their aim of providing decent and affordable housing. Housing renovation projects offer the possibility of upgrading the health and comfort levels of their old housing stock to current standards and improve energy efficiency, and this solution also addresses the fuel poverty problems suffered by some tenants. Unfortunately, the limited financial capacity of SHOs is hampering the scale of housing renovation projects and the energy savings achieved.  At the same time, the renovation of the existing housing stock is seen as one of the most promising alternative routes to achieving the ambitious CO2 emissions reduction targets set by European authorities – namely, to reduce EU CO2 emissions to 20% below their 1990 levels by 2020. The synergy between European targets and the aims of SHOs has been addressed by the energy policies of the member states, which focus on the potential energy savings achievable by renovating social housing. In fact, the European initiatives have prioritised energy savings in social housing renovations to such an extent that these are referred to as ‘energy renovations’. Energy renovation is therefore a renovation project with higher energy savings target than a regular renovation project. In total, European SHOs own 21.5 million dwellings representing around 9.4% of the total housing stock. Each SHO owns a large number of dwellings, which means there are fewer people to convince of the need to make energy savings through building renovations, maximising the potentially high impact of decisions. Moreover, SHOs are responsible for maintaining and upgrading their properties in order to continue

  19. Tenants’ experiences and satisfaction with renovated and energy retrofitted social housing

    DEFF Research Database (Denmark)

    Knudsen, Henrik Nellemose; Jensen, Ole Michael

    studied and verified. The objective of the present project was to evaluate tenants’ experiences and satisfaction with renovated and energy retrofitted social housing. A questionnaire was developed that included questions about perceived indoor climate, possible co-benefits, the renovation process, various....... The evaluations show that it is possible to implement a comprehensive renovation with focus on energy savings in older building stock and at the same time add value for tenants in the form of i.a. improved perceived indoor climate....

  20. Analysis and Comparison of Overheating Indices in Energy Renovated Houses

    DEFF Research Database (Denmark)

    Psomas, Theofanis Ch.; Heiselberg, Per Kvols; Duer, Karsten

    2015-01-01

    The scientific literature offers a number of methods for assessing the likelihood of overheating in buildings. The paper calculates eight well-documented indices for four representative family houses, from moderate and temperate climates, under different renovation processes (66 variants), with t......The scientific literature offers a number of methods for assessing the likelihood of overheating in buildings. The paper calculates eight well-documented indices for four representative family houses, from moderate and temperate climates, under different renovation processes (66 variants......), with the use of multi-zone energy software. In two out of four cases, the calculation included passive cooling measures for optimization purposes (shading, ventilative cooling). The analysis shows strong correlations between different methods-indices originating from the same comfort model theory independently...

  1. Economic efficiency of high-rise construction in the Moscow program of renovation of housing stock

    Science.gov (United States)

    Misailovov, Andrey

    2018-03-01

    The article considers a new initiative of the regional authorities of updating the housing stock designated as the renovation of housing. Its main aspects are analyzed, including the nature of program, economic efficiency of its implementation due to high-rise construction and the regulatory and legislative framework, the procedure for implementing the program, and the time frame for its implementation. The role of the program for regions in which high depreciation of the housing stock is combined with a limited number of sites for a new housing construction is disclosed. The high-rise construction in the renovation program is presented as a variant of a successful solution not only of the tasks of renovating the housing stock, but also of filling the regional budget. The social and economic orientation of the high-rise construction and the involvement of residents in the process of making town-planning decisions in the field of high-rise construction at all stages of implementing the program are shown.

  2. Existing Sustainable Renovation Concepts

    DEFF Research Database (Denmark)

    Tommerup, Henrik M.; Vanhoutteghem, Lies; Gustavsson, Leif

    The Nordic single-family house renovation market is dominated by a craftsman based approach with individual solutions, traditional warehouses ”do-it-yourself-shops” and some actors marketing single products. To speed up the implementation of sustainable renovation of single-family houses there is......The Nordic single-family house renovation market is dominated by a craftsman based approach with individual solutions, traditional warehouses ”do-it-yourself-shops” and some actors marketing single products. To speed up the implementation of sustainable renovation of single-family houses...

  3. Carmes Polytechnique, Housing in the Heart of Paris Energy renovation of a social housing estate in Paris

    Directory of Open Access Journals (Sweden)

    Christian Horn

    2017-12-01

    Full Text Available The architecture offices Atelier de la Seine and Rethink have been commissioned with the engineers Pouget Consultants by the social landlord Paris Habitat for the extensive renovation of a social housing estate in the historic centre of Paris. The estate has been built in 1930 and integrates a part of the former college of the Lombard build in the 17th century. It belongs to the social housing typology 'Habitations à Bon Marché (HBM' constructed between1894 and 1949. This typology is generally characterized by its integration in its urban context and an apparent brick facade. The renovation project includes a focus on the reduction of the energy consumption. An important subject, as of the total number of 4.6 millions of social housing in France more than 50 % have been build before 1975 (before the first thermal regulation and many are still considered energy-intensive.

  4. From demonstration projects to volume market : Market development for advanced housing renovation

    NARCIS (Netherlands)

    Mlecnik, E.; Prendergast, E.; Rodsjo, A.; Haavik, T.; Parker, P.

    2010-01-01

    How do we get from demonstration projects to a volume market for very low energy demand in advanced housing renovation? The contributors to this report have been working with this issue for many years. Some worked in both IEA SHC Task 28 Sustainable Housing (2000-2005) and in SHC Task 37 Advanced

  5. Overheating risk barriers to energy renovations of single family houses

    DEFF Research Database (Denmark)

    Psomas, Theofanis Ch.; Heiselberg, Per Kvols; Duer, Karsten

    2016-01-01

    Highlights •Energy renovations of houses in moderate climates increase overheating risk. •Critical measures are the floor insulation and the improvement of the airtightness. •Decrease of the g value of windows diminishes the intensity and the period of it. •Static method of assessment shows highe...

  6. The milk quality and feasebility analysis of loose housing dairy cows - a case study

    Directory of Open Access Journals (Sweden)

    Marjan Janžekovič

    2006-03-01

    Full Text Available The aim of the study was technological and economical analysis of free range cow breeding. The case study analyzed two different systems of holstein-friesian dairy cows breeding. The model total costs enterprise budget was developed for evaluation of economic feasibility of loose housing dairy cows in comparison with tied cow breeding system. Computer supported calculation enabled estimation of the most important economical parameters (net return, total cost, and coefficient of economics. Results obtained show that (at observed input parameters loose housing system is economically feasible, if there is a minimum of 41 dairy cows with an average milk production of 8610 kg per cow. It was also established that cows need approximately 6 months to fully adapt to the loose housing system.

  7. Initiatives for the energy renovation of single-family houses inDenmark evaluated on the basis of barriers and motivators

    DEFF Research Database (Denmark)

    Grøn Bjørneboe, Matilde; Svendsen, Svend; Heller, Alfred

    2018-01-01

    The renovation of single-family houses in Denmark is progressing only slowly. Changes in current pol-icy are needed if the political goal of a fossil-free building sector as part of a fossil-free society is to beachieved. Known barriers and motivators for energy renovation are identified, and arr......The renovation of single-family houses in Denmark is progressing only slowly. Changes in current pol-icy are needed if the political goal of a fossil-free building sector as part of a fossil-free society is to beachieved. Known barriers and motivators for energy renovation are identified......, suggestions are madefor improvement in four areas: (1) focus on non-energy benefits rather than investment, (2) enhance-ment of subsidy system, (3) including relevant renovation plans in the energy performance certificate(EPC), and (4) long-term regulation on the maximum allowed energy consumption of houses....

  8. Improved perceived indoor environment in renovated and energy-retrofitted social housing

    DEFF Research Database (Denmark)

    Knudsen, Henrik Nellemose

    2017-01-01

    , noise from outside and too little daylight. The evaluation shows that it is possible to achieve a win-win situation, with both energy savings and improved perceived indoor environment. The evaluation also reveals that careful attention is needed to avoid introducing annoying noise from new technical......The purpose of the present study was, among other things, to evaluate how tenants perceived the indoor environment in renovated and energy-retrofitted social housing erected in the 1960s. Tenants answered a questionnaire to quantify problems and satisfaction with the indoor environment before...... and after the renovation work. A majority of tenants perceived the indoor environment improved for all parameters: temperature, draught, air quality, noise and daylight, after the renovation work. In particular, the tenants experienced fewer problems with too low temperature and draught during the winter...

  9. Defining Sustainability in Relation to the Renovation of Modern Housing

    DEFF Research Database (Denmark)

    Peters, Terri

    Summary This paper focuses on comparing practice-based and academic definitions and metrics of “sustainability” as they relate to the transformation of Modern housing in Denmark. Keywords:Sustainability, Renovation, Architecture, Denmark, Modern housing 1. Introduction to the Study Buildings...... define and understand what constitutes green design, but also to understand its premises for it would be counter productive for the designer to leap into green design without understanding and agreeing to such basic principles as connectedness”. In recent years, a new way of thinking about sustaina...

  10. Energy renovation of single-family houses in Denmark utilising long-term financing based on equity

    DEFF Research Database (Denmark)

    Kragh, Jesper; Rose, Jørgen

    2011-01-01

    This paper aims to present an economic overview of the opportunities for energy renovation of single-family houses in Denmark financed over the long term. The paper focuses on the economic difference between energy savings and the repayment of investment. Taking out the average remaining 20% equity...... in long-term property mortgage loans and utilising it for extensive energy renovation improves both the economy and the extent of included measures. Approximately 30% of energy consumption in Denmark is used for space heating. The existing 1 million single-family houses account for approximately half...

  11. 76 FR 27044 - Lead-Based Paint Renovation, Repair and Painting, and Pre-Renovation Education Activities in...

    Science.gov (United States)

    2011-05-10

    ..., Repair and Painting, and Pre- Renovation Education Activities in Target Housing and Child Occupied...), and a lead-based paint pre-renovation education program in accordance with section 406(b) of TSCA, 15... renovation and remodeling activities of pre-1978 housing and child-occupied facilities in the State of...

  12. Business models for full service energy renovation of single-family houses in Nordic countries

    DEFF Research Database (Denmark)

    Mahapatra, Krushna; Gustavsson, Leif; Haavik, Trond

    2013-01-01

    the similarities are on how the service is provided. Even though there is strong business potential for one-stop-shop energy renovation concept, still it has been somewhat difficult to start or run such a business. Various options to overcome the hindrances to promote energy efficient renovation of detached houses...... markets are dominated by handicraft-based individual solutions. In this paper we have analyzed the opportunities for implementation of one-stop-shop business models where an overall contractor offers full-service renovation packages including consulting, independent energy audit, renovation work, follow......-up (independent quality control and commissioning) and financing. A comparative assessment of emerging business models in the Nordic countries shows that different types of actors can provide such a service. Financing is included in some models. There are differences in how customers are contacted, while...

  13. Energy renovation of an old single-family house

    DEFF Research Database (Denmark)

    Overgaard, L.L.; Tommerup, Henrik M.; Svendsen, Svend

    2005-01-01

    After having identified a large potential for profitable energy renovation of the existing building stock, a demonstration project was carried out in practice. This paper deals with the methods and results from the demonstration project concerning a 161 m² poorly insulated single-family house built...... saving improvements carried out in the project are “easy to carry out” and cost-beneficial measures such as cavity wall insulation, loft insulation, insulation of walls under windows and a new second window-frame with energy-saving glass. The work was carried out by professional contractors at a total......). If a conservative way of financing the building work of 157,000 DKK is assumed, the first year’s cost equals DKK 8,500 and the house owner will gain a net saving the first year of DKK 7,500....

  14. Leveraging Limited Scope for Maximum Benefit in Occupied Renovation of Uninsulated Cold Climate Multifamily Housing

    Energy Technology Data Exchange (ETDEWEB)

    Neuhauser, K. [Building Science Corporation (BSC), Somer, MA (United States); Bergey, D. [Building Science Corporation (BSC), Somer, MA (United States); Osser, R. [Building Science Corporation (BSC), Somer, MA (United States)

    2012-03-01

    This project examines a large-scale renovation project within a 500 unit, 1960's era subsidized urban housing community. This research focuses on the airflow control and window replacement measures implemented as part of the renovations to the low-rise apartment buildings. The window replacement reduced the nominal conductive loss of the apartment enclosure by approximately 15%; air sealing measures reduced measured air leakage by approximately 40% on average.

  15. Overheating assessment of energy renovations

    DEFF Research Database (Denmark)

    Psomas, Theofanis Ch.; Heiselberg, Per Kvols; Duer, Karsten

    2016-01-01

    In many post-occupancy studies of renovated houses elevated temperatures have been documented. This article presents in which situations overheating need to be addressed and which renovation measures are causing this need. The analysis contains representative houses from central and north Europe...

  16. Adoption of innovative energy systems in social housing: Lessons from eight large-scale renovation projects in The Netherlands

    International Nuclear Information System (INIS)

    Hoppe, Thomas

    2012-01-01

    Thanks to new insights on the impacts that dwellings have throughout their life cycles, there has been increased attention to retrofitting innovative energy systems (IES) in existing housing. This paper uses an explorative case study design to gain more knowledge about the governance aspects of this under-researched topic. The central research question is: Which factors influence the adoption of innovative energy systems in social housing sites during renovation projects? To answer this question, eight large-scale renovation projects in The Netherlands were investigated. These case studies allowed the identification of barriers, enabling factors and perspectives from three main actors—housing associations, tenants and local authorities. It turns out that adopting IES encounters many barriers: lack of trust between project partners, delay in project progress, financial feasibility considerations, lack of support from tenants, lengthy legal permit procedures, over-ambitious project goals, poor experiences in previous projects, and IES ambitions that are not taken serious by key decision-makers. Furthermore, IES were only successfully fitted in three of the eight projects. Moreover, ambitions were lowered as the projects progressed in all the cases investigated. The study calls for further systematic, in-depth comparison of fitting IES in large-scale renovation projects in social housing. - Highlights: ► Attention to adoption of innovative energy systems in social housing. ► Several non-technical factors influence adoption. ► In-depth analysis of eight local-level renovation projects. ► Ambitions are lowered as projects progress. ► Barriers: financial feasibility, over-ambitious goals, delay, lack of trust.

  17. Super-energy wrap-up model for renovation of standard wooden houses in Greenland?

    DEFF Research Database (Denmark)

    Bjarløv, Søren Peter; Vladyková, Petra

    2012-01-01

    This paper is based on the developed theoretical practice of super-insulation solution for renovation of exiting standard wooden houses in Greenland built from 1950s until 2006, more than half the building stock in Arctic Greenland. From various perspectives, the wrap-up system is evaluated as a ...

  18. Bodems voor vrijloopstallen = Bedding materials in loose housing systems for dairy cattle

    NARCIS (Netherlands)

    Dooren, van H.J.C.; Galama, P.J.; Smits, M.C.J.

    2012-01-01

    Sand, Compost and 'toemaak' (a mixture of reed, dredge and manure) had been used as bedding material for loose housing systems on three dairy research farms of Wageningen UR Livestock Research. Gaseous emissions, animal behavior and health and food safety aspects were measured and reported together

  19. Possible financing schemes for one-stop-shop service for sustainable renovation of single-family houses

    DEFF Research Database (Denmark)

    Mahapatra, Krushna; Gustavsson, Leif; Haavik, Trond

    energy use behaviour of the occupants and the difficulty to predict future energy prices. The options to finance energy efficiency renovations include homeowners’ own resources, mortgage refinancing, flex loan, personal loan, financing by service providers, preferential loan, subsidies/grants, credit...... for the homeowners, and banks will have a less risky asset in their portfolio. In situations where homeowners cannot avail additional mortgage financing, e.g. those who recently purchased a house and used the limit to such loans, banks may consider an energy efficient renovation plan prepared by an entrepreneur...

  20. Defining Sustainability in Relation to the Renovation of Modern Housing

    DEFF Research Database (Denmark)

    Peters, Terri

    Summary This paper focuses on comparing practice-based and academic definitions and metrics of “sustainability” as they relate to the transformation of Modern housing in Denmark. Keywords:Sustainability, Renovation, Architecture, Denmark, Modern housing 1. Introduction to the Study Buildings......”. 2. Background to the Study and Study Context Despite the increasing focus on low energy buildings and sustainability, the definitions of key terms in these areas are unclear. This paper focuses on architectural approaches to sustainable building, rather than engineering or other ways of approaching...... process, and how successfully they were used. Data collected includes definitions of sustainability from outside of the profession, as well as in architectural literature. Definitions used in the context of architectural practice were also studied. The definitions from selected key texts were compared...

  1. Solar renovation demonstration projects

    Energy Technology Data Exchange (ETDEWEB)

    Bruun Joergensen, O [ed.

    1998-10-01

    In the framework of the IEA SHC Programme, a Task on building renovation was initiated, `Task 20, Solar Energy in Building Renovation`. In a part of the task, Subtask C `Design of Solar Renovation Projects`, different solar renovation demonstration projects were developed. The objective of Subtask C was to demonstrate the application of advanced solar renovation concepts on real buildings. This report documents 16 different solar renovation demonstration projects including the design processes of the projects. The projects include the renovation of houses, schools, laboratories, and factories. Several solar techniques were used: building integrated solar collectors, glazed balconies, ventilated solar walls, transparent insulation, second skin facades, daylight elements and photovoltaic systems. These techniques are used in several simple as well as more complex system designs. (au)

  2. 75 FR 6383 - Lead-Based Paint Renovation, Repair and Painting, and Pre-Renovation Education Activities in...

    Science.gov (United States)

    2010-02-09

    ..., Repair and Painting, and Pre- Renovation Education Activities in Target Housing and Child Occupied....C. 2682(c)(3), and a lead-based paint pre-renovation education program in accordance with section... TSCA, and a lead-based paint pre-renovation education program in accordance with section 406(b) of TSCA...

  3. CALCULATION REGARDING THERMAL TRANSFER THROUGH CLOSING ELEMENTS FOR A CATTLE SHELTER KEPT IN LOOSE HOUSING

    Directory of Open Access Journals (Sweden)

    Ancuţa JURCO

    2013-01-01

    Full Text Available This paper presents the calculation regarding thermal transmission due to closing elements for cattle shelter kept loose housing. The shelter is compound from 2 compartments, splitted in the middle by a cross alley. The compartments are divided in feeding area and resting area. The shelter has the opening of 16.35 m, total hall lenght is 40.95 m, with surface about 669.53 sqm and the maximum hight about 6.40 m. After analyzing the calculation of heat transfer through closing elements for a cattle shelter kept in loose housing show that the amount of heat lost through external walls with heterogeneous structure is minimal compared to the classical exterior wall with homogeneous structure.

  4. Energy intake and growth of weanling horses in a cold loose housing system

    Directory of Open Access Journals (Sweden)

    E. AUTIO

    2008-12-01

    Full Text Available The demand for information relating to the nutrition of horses in a cold environment is increasing with the popularity of loose housing of horses. This study examined the energy intake and growth of 10 weanling horses from November to March (22 weeks in a loose housing system (paddock and insulated sleeping hall with deep-litter bed. The horses were measured weekly for body condition and body weight, and the feeding was adjusted according to a horse’s body condition. Metabolizable energy (ME intake was compared to Finnish (MTT 2006 and Swedish (SLU 2004 nutrient requirements for 6–12-month-old horses. ME intake (75.5 ± 11.8 MJ d-1, mean ± SD was on average 24.6% above the requirements. The intake varied in a non-linear fashion in the course of the winter: y = 0.086x2 – 0.902x + 71.5, where x is weeks from November to March (p

  5. Techno-economic analysis of energy renovation measures for a district heated multi-family house

    International Nuclear Information System (INIS)

    Gustafsson, Marcus; Gustafsson, Moa Swing; Myhren, Jonn Are; Bales, Chris; Holmberg, Sture

    2016-01-01

    Highlights: • Energy saving measures can be cost-effective as part of a planned renovation. • Primary energy consumption, non-renewable energy consumption and CO_2 emissions are assessed for different electricity mixes. • EAHP can be a cost-effective and environmentally beneficial complement to district heating. • EAHP has lower LCC and significantly shorter payback time than ventilation with heat recovery. • Low-temperature ventilation radiators improve the COP of the heat pump. - Abstract: Renovation of existing buildings is important in the work toward increased energy efficiency and reduced environmental impact. The present paper treats energy renovation measures for a Swedish district heated multi-family house, evaluated through dynamic simulation. Insulation of roof and façade, better insulating windows and flow-reducing water taps, in combination with different HVAC systems for recovery of heat from exhaust air, were assessed in terms of life cycle cost, discounted payback period, primary energy consumption, CO_2 emissions and non-renewable energy consumption. The HVAC systems were based on the existing district heating substation and included mechanical ventilation with heat recovery and different configurations of exhaust air heat pump. Compared to a renovation without energy saving measures, the combination of new windows, insulation, flow-reducing taps and an exhaust air a heat pump gave up to 24% lower life cycle cost. Adding insulation on roof and façade, the primary energy consumption was reduced by up to 58%, CO_2 emissions up to 65% and non-renewable energy consumption up to 56%. Ventilation with heat recovery also reduced the environmental impact but was not economically profitable in the studied cases. With a margin perspective on electricity consumption, the environmental impact of installing heat pumps or air heat recovery in district heated houses is increased. Low-temperature heating improved the seasonal performance factor of the

  6. Analysis of promising sustainable renovation concepts

    DEFF Research Database (Denmark)

    Vanhoutteghem, Lies; Tommerup, Henrik M.; Svendsen, Svend

    This report focuses on analyses of the most promising existing sustainable renovation concepts, i.e. full-service concepts and technical concepts, for single-family houses. As a basis for the analyses a detailed building stock analysis was carried out. Furthermore, as a basis a general working...... method for proposals on package solutions for sustainable renovation was described. The method consists of four steps, going from investigation of the house to proposal for sustainable renovation, detailed planning and commissioning after renovation. It could be used by teams of consultants...... of the building envelope and the electricity required to run the system. Positive impact on the indoor environment can be expected. Thermal comfort will be improved by insulation and air-tightness measures that will increase surface temperatures and reduce draught from e.g. badly insulated windows. A ventilation...

  7. Energy renovation services for single-family houses. Generalization and challenges of the one-stop-shop service model; Pientalojen energiaremonttipalvelut. Kokonaispalvelumallin yleistyminen ja sen haasteet

    Energy Technology Data Exchange (ETDEWEB)

    Paiho, S.; Kuusisto, J.; Stenlund, O.; Ala-Juusela, M.

    2012-08-15

    There are about 1.1 million single-family houses in Finland. 75% of these houses were built before year 1990. Majority of the houses remain at the energy- and eco-efficiency level of their construction time. If all of these houses were renovated to meet the state-of-the- art energy-efficiency requirements, the savings in nationwide consumption of heating energy would be 11.8 TWh. There are lots of typical single-family houses in the Finnish housing stock from the construction period. Renovation concepts with typical solutions can be developed for these typical houses. However, it must always be ensured that the selected concept suits the particular house. Comprehensive, full-service or one-stop-shop service models can be developed based on the renovation concepts. These may also include other services such as a building condition survey or a study, energy certificate, equipment and system installations, financial services, operation and maintenance services, and energy-monitoring and consumption analysis. It is natural to connect the one-stop-shop service model into the renovation process. The process includes stages for marketing, preliminary building inspection and energy audit, a detailed building inspection and energy analysis, a proposal for an integrated solution, the actual repair work, and quality assurance and continuous commissioning. Different stages involve different actors and service providers. There are several options for which type of organization or agent takes the main responsibility for the one-stop-shop service. Depending on the responsible organization, the content provider's business model and priorities differ. The one-stop-shop services business has been a narrow part of actors' whole business, so far. Some actors have already stopped providing the services, either due to the lack of demand or unprofitableness of the services. In an ideal model, the value promise and the main features of the model are the same, but the service

  8. 75 FR 39524 - Lead-Based Paint Renovation, Repair and Painting, and Pre-Renovation Education Activities in...

    Science.gov (United States)

    2010-07-09

    ..., Repair and Painting, and Pre- Renovation Education Activities in Target Housing and Child Occupied... pre-renovation education program in accordance with section 406(b) of TSCA, 15 U.S.C. 2686(b). This... and child-occupied facilities in the State of Oregon. Individuals and firms falling under the North...

  9. The effects of floor heating on body temperature, water consumption, stress response and immune competence around parturition in loose-housed sows

    DEFF Research Database (Denmark)

    Damgaard, B M; Malmkvist, J; Pedersen, L J

    2009-01-01

    The aim of the present study was to study whether floor heating from 12 h after onset of nest building until 48 h after birth of the first piglet had any effect on measures related to body temperature, water consumption, stress response and immune competence in loose-housed sows (n = 23......). In conclusion, the present results indicate that floor heating for a limited period around parturition did not compromise physiological and immunological parameters, water intake and body temperature in loose-housed sows. The water intake peaked the day before parturition and the body temperature peaked...

  10. Chemical exposures in recently renovated low-income housing: Influence of building materials and occupant activities.

    Science.gov (United States)

    Dodson, Robin E; Udesky, Julia O; Colton, Meryl D; McCauley, Martha; Camann, David E; Yau, Alice Y; Adamkiewicz, Gary; Rudel, Ruthann A

    2017-12-01

    Health disparities in low-income communities may be linked to residential exposures to chemicals infiltrating from the outdoors and characteristics of and sources in the home. Indoor sources comprise those introduced by the occupant as well as releases from building materials. To examine the impact of renovation on indoor pollutants levels and to classify chemicals by predominant indoor sources, we collected indoor air and surface wipes from newly renovated "green" low-income housing units in Boston before and after occupancy. We targeted nearly 100 semivolatile organic compounds (SVOCs) and volatile organic compounds (VOCs), including phthalates, flame retardants, fragrance chemicals, pesticides, antimicrobials, petroleum chemicals, chlorinated solvents, and formaldehyde, as well as particulate matter. All homes had indoor air concentrations that exceeded available risk-based screening levels for at least one chemical. We categorized chemicals as primarily influenced by the occupant or as having building-related sources. While building-related chemicals observed in this study may be specific to the particular housing development, occupant-related findings might be generalizable to similar communities. Among 58 detected chemicals, we distinguished 25 as primarily occupant-related, including fragrance chemicals 6-acetyl-1,1,2,4,4,7-hexamethyltetralin (AHTN) and 1,3,4,6,7,8-hexahydro-4,6,6,7,8,8-hexamethylcyclopenta[g]-2-benzopyran (HHCB). The pre- to post-occupancy patterns of the remaining chemicals suggested important contributions from building materials for some, including dibutyl phthalate and xylene, whereas others, such as diethyl phthalate and formaldehyde, appeared to have both building and occupant sources. Chemical classification by source informs multi-level exposure reduction strategies in low-income housing. Copyright © 2017 The Authors. Published by Elsevier Ltd.. All rights reserved.

  11. Smart Solar Housing Renovation

    NARCIS (Netherlands)

    Ham, M.; Bruijn, de D.M.P.; Vos, S.J.H.; Weijers, K.A.M.; Straver, M.C.W.; Scartezzini, J.L.

    2009-01-01

    After World War II, the demand for houses in the Netherlands was enormous. Large housing construction programs were established in the fifties, sixties and seventies. Nowadays, these houses are facing some societal, economic and technological problems. On the other hand, many of the occupants are

  12. Renovation of historic, protected buildings in Geneva

    Energy Technology Data Exchange (ETDEWEB)

    Weber, W.; Haefeli, P.

    2009-07-01

    This report for the Swiss Federal Office of Energy (SFOE) reports on work done within the IEA Solar Heating and Cooling Program's Task 37. The objective of SHC Task 37 is to develop a solid knowledge base on how to renovate housings to a very high energy standard and how to develop strategies that support the market penetration of such renovation methods. The report deals with four listed buildings of historical value in Geneva, Switzerland, and examines various aspects of the renovation. These aspects include a discussion of the techniques applied, including internal and external insulation. Simulation methods used and results obtained are discussed. The improvements made are evaluated.

  13. Rebuilding instead of renovation?; Neubauen statt Sanieren?

    Energy Technology Data Exchange (ETDEWEB)

    Ott, W.; Seiler, B.; Kaufmann, Y. [Econcept AG, Zuerich (Switzerland); Binz, A.; Moosmann, A. [Fachhochschule beider Basel, Muttenz (Switzerland)

    2002-07-01

    This comprehensive final report for the Swiss Federal Office of Energy (SFOE) presents the results of a study that examined the question of building renewal in Switzerland - should one rebuild or renovate? The report first examines the age-profile of Swiss buildings, defines renewal strategies and ideas, looks at renewal cycles and, in the light of future renewal demands, describes scenarios for replacement with new buildings instead of carrying out total renovations. The housing owners and their methods of management for multiple-apartment housing are described and the various factors involved in making decisions on how to renovate are discussed from the technical, legal and fiscal points of view. The report goes on to examine the ecological and energy aspects of renewal, presenting figures on energy consumption and material flows. Building renewal is also discussed from the social and regional planning points of view. The report is concluded with a discussion on rebuilding or renewal that takes current renewal deficits, costs and social aspects into account and makes recommendations for further action. An appendix presents renewal case studies.

  14. Negotiating heritage in Danish public housing renovation

    DEFF Research Database (Denmark)

    Martens Gudmand-Høyer, Sidse

    2017-01-01

    This paper presents a significant problem when it comes to the challenging task of safeguarding recent past architectural heritage with reference to the democratization ideals propagated by the New Heritage paradigm. Based on controversy mapping relating to the renovation of a Danish 1950s high...... and the performance of interventions conveying heritage understandings can be addressed and given a binding form for this process and its partners....

  15. Collaborative business model development for home energy renovations

    NARCIS (Netherlands)

    Mlecnik, E.; Straub, A.; Haavik, T

    2018-01-01

    In the EU, housing retrofit rates have to increase to about 2.5–3% of the housing stock per year to achieve policy goals. The development of new business models and collaboration of SMEs in a fragmented market is expected to result in an increase in home renovations. This study presents a way to

  16. Challenges and opportunities of the passive house concept for retrofit

    NARCIS (Netherlands)

    Mlecnik, E.

    2010-01-01

    For newly built houses and renovations European and national ambitions prescribe increasing levels of energy performances, even including achieving the passive house standard, net zero energy or carbon neutral houses. For highly energy-efficient renovation, project information from first

  17. Supply-side collaboration for energy-efficient renovations

    NARCIS (Netherlands)

    Straub, A.; Mlecnik, E.

    2015-01-01

    The supply side for nearly zero energy building (nZEB) renovation of owner-occupied single-family houses in Europe is suffering from a severe image problem of lack of knowledge and trust, inefficient construction processes, insufficient quality assurance and communication difficulties with

  18. Indoor air quality in green-renovated vs. non-green low-income homes of children living in a temperate region of US (Ohio).

    Science.gov (United States)

    Coombs, Kanistha C; Chew, Ginger L; Schaffer, Christopher; Ryan, Patrick H; Brokamp, Cole; Grinshpun, Sergey A; Adamkiewicz, Gary; Chillrud, Steve; Hedman, Curtis; Colton, Meryl; Ross, Jamie; Reponen, Tiina

    2016-06-01

    Green eco-friendly housing includes approaches to reduce indoor air pollutant sources and to increase energy efficiency. Although sealing/tightening buildings can save energy and reduce the penetration of outdoor pollutants, an adverse outcome can be increased buildup of pollutants with indoor sources. The objective of this study was to determine the differences in the indoor air quality (IAQ) between green and non-green homes in low-income housing complexes. In one housing complex, apartments were renovated using green principles (n=28). Home visits were conducted immediately after the renovation, and subsequently at 6 months and at 12 months following the renovation. Of these homes, eight homes had pre-renovation home visits; this allowed pre- and post-renovation comparisons within the same homes. Parallel visits were conducted in non-green (control) apartments (n=14) in a nearby low-income housing complex. The IAQ assessments included PM2.5, black carbon, ultrafine particles, sulfur, total volatile organic compounds (VOCs), formaldehyde, and air exchange rate. Data were analyzed using linear mixed-effects models. None of the indoor pollutant concentrations were significantly different between green and non-green homes. However, we found differences when comparing the concentrations before and after renovation. Measured immediately after renovation, indoor black carbon concentrations were significantly lower averaging 682 ng/m(3) in post-renovation vs. 2364 ng/m(3) in pre-renovation home visits (p=0.01). In contrast, formaldehyde concentrations were significantly higher in post-renovated (0.03 ppm) than in pre-renovated homes (0.01 ppm) (p=0.004). Questionnaire data showed that opening of windows occurred less frequently in homes immediately post-renovation compared to pre-renovation; this factor likely affected the levels of indoor black carbon (from outdoor sources) and formaldehyde (from indoor sources) more than the renovation status itself. To reduce IAQ

  19. NorthernSTAR 1-½-Story Demonstration House of Cold Climate Solutions for Affordable Housing

    Energy Technology Data Exchange (ETDEWEB)

    Schirber, T. [Univ. of Minnesota, St. Paul, MN (United States); Ojczyk, C. [Univ. of Minnesota, St. Paul, MN (United States); Jacobson, R. [Univ. of Minnesota, St. Paul, MN (United States)

    2016-03-01

    This demonstration project is an example of three high-performance measures applied to one house in Minneapolis, Minnesota. The selected vacant home was completely renovated by Urban Homeworks (UHW), which is a nonprofit housing partner, with the intent of selling the home to a low-income family. The renovation included the addition of the three advanced-performance technologies that were applied to the overall scope of the project.

  20. Indoor air quality in green-renovated vs. non-green low-income homes of children living in a temperate region of US (Ohio)

    Energy Technology Data Exchange (ETDEWEB)

    Coombs, Kanistha C. [University of Cincinnati, Department of Environmental Health, P.O. Box 670056, Cincinnati, OH (United States); Chew, Ginger L. [Centers for Disease Control and Prevention (CDC), National Center for Environmental Health, Air Pollution and Respiratory Health Branch, 4770 Buford Hwy., N.E., MS-F60, Atlanta, GA (United States); Schaffer, Christopher [University of Cincinnati, Department of Environmental Health, P.O. Box 670056, Cincinnati, OH (United States); Ryan, Patrick H. [University of Cincinnati, Department of Environmental Health, P.O. Box 670056, Cincinnati, OH (United States); Department of Pediatrics, Cincinnati Children' s Hospital Medical Center, 3333 Burnet Ave, Cincinnati, OH (United States); Brokamp, Cole; Grinshpun, Sergey A. [University of Cincinnati, Department of Environmental Health, P.O. Box 670056, Cincinnati, OH (United States); Adamkiewicz, Gary [Harvard University, T.H. Chan School of Public Health, Department of Environmental Health, 401 Park Drive, Boston, MA (United States); Chillrud, Steve [Columbia University, Lamont-Doherty Earth Observatory, Geochemistry Division, P.O. Box 8000, Palisades, New York (United States); Hedman, Curtis [University of Wisconsin-Madison, Wisconsin State Laboratory of Hygiene, 465 Henry Mall, Madison, WI (United States); Colton, Meryl [Harvard University, T.H. Chan School of Public Health, Department of Environmental Health, 401 Park Drive, Boston, MA (United States); Ross, Jamie [Columbia University, Lamont-Doherty Earth Observatory, Geochemistry Division, P.O. Box 8000, Palisades, New York (United States); Reponen, Tiina [University of Cincinnati, Department of Environmental Health, P.O. Box 670056, Cincinnati, OH (United States)

    2016-06-01

    Green eco-friendly housing includes approaches to reduce indoor air pollutant sources and to increase energy efficiency. Although sealing/tightening buildings can save energy and reduce the penetration of outdoor pollutants, an adverse outcome can be increased buildup of pollutants with indoor sources. The objective of this study was to determine the differences in the indoor air quality (IAQ) between green and non-green homes in low-income housing complexes. In one housing complex, apartments were renovated using green principles (n = 28). Home visits were conducted immediately after the renovation, and subsequently at 6 months and at 12 months following the renovation. Of these homes, eight homes had pre-renovation home visits; this allowed pre- and post-renovation comparisons within the same homes. Parallel visits were conducted in non-green (control) apartments (n = 14) in a nearby low-income housing complex. The IAQ assessments included PM{sub 2.5}, black carbon, ultrafine particles, sulfur, total volatile organic compounds (VOCs), formaldehyde, and air exchange rate. Data were analyzed using linear mixed-effects models. None of the indoor pollutant concentrations were significantly different between green and non-green homes. However, we found differences when comparing the concentrations before and after renovation. Measured immediately after renovation, indoor black carbon concentrations were significantly lower averaging 682 ng/m{sup 3} in post-renovation vs. 2364 ng/m{sup 3} in pre-renovation home visits (p = 0.01). In contrast, formaldehyde concentrations were significantly higher in post-renovated (0.03 ppm) than in pre-renovated homes (0.01 ppm) (p = 0.004). Questionnaire data showed that opening of windows occurred less frequently in homes immediately post-renovation compared to pre-renovation; this factor likely affected the levels of indoor black carbon (from outdoor sources) and formaldehyde (from indoor sources) more than the renovation status

  1. Indoor air quality in green-renovated vs. non-green low-income homes of children living in a temperate region of US (Ohio)

    International Nuclear Information System (INIS)

    Coombs, Kanistha C.; Chew, Ginger L.; Schaffer, Christopher; Ryan, Patrick H.; Brokamp, Cole; Grinshpun, Sergey A.; Adamkiewicz, Gary; Chillrud, Steve; Hedman, Curtis; Colton, Meryl; Ross, Jamie; Reponen, Tiina

    2016-01-01

    Green eco-friendly housing includes approaches to reduce indoor air pollutant sources and to increase energy efficiency. Although sealing/tightening buildings can save energy and reduce the penetration of outdoor pollutants, an adverse outcome can be increased buildup of pollutants with indoor sources. The objective of this study was to determine the differences in the indoor air quality (IAQ) between green and non-green homes in low-income housing complexes. In one housing complex, apartments were renovated using green principles (n = 28). Home visits were conducted immediately after the renovation, and subsequently at 6 months and at 12 months following the renovation. Of these homes, eight homes had pre-renovation home visits; this allowed pre- and post-renovation comparisons within the same homes. Parallel visits were conducted in non-green (control) apartments (n = 14) in a nearby low-income housing complex. The IAQ assessments included PM_2_._5, black carbon, ultrafine particles, sulfur, total volatile organic compounds (VOCs), formaldehyde, and air exchange rate. Data were analyzed using linear mixed-effects models. None of the indoor pollutant concentrations were significantly different between green and non-green homes. However, we found differences when comparing the concentrations before and after renovation. Measured immediately after renovation, indoor black carbon concentrations were significantly lower averaging 682 ng/m"3 in post-renovation vs. 2364 ng/m"3 in pre-renovation home visits (p = 0.01). In contrast, formaldehyde concentrations were significantly higher in post-renovated (0.03 ppm) than in pre-renovated homes (0.01 ppm) (p = 0.004). Questionnaire data showed that opening of windows occurred less frequently in homes immediately post-renovation compared to pre-renovation; this factor likely affected the levels of indoor black carbon (from outdoor sources) and formaldehyde (from indoor sources) more than the renovation status itself. To

  2. Opportunities and Barriers related to Supply Chain Collaboration for Delivering Integrated Single-Family Home Renovations

    NARCIS (Netherlands)

    Mlecnik, E.; Kondratenko, I.; Haavik, T.

    2013-01-01

    Single-family home renovations often show deficiencies in project management. There might be a market addressing house owners who would prefer integrated renovation services and clear responsibilities. Companies that would respond to these client’s needs would have a clear market potential,

  3. ENERGY EFFICIENT RENOVATION OF SOCIAL HOUSING

    DEFF Research Database (Denmark)

    Blyt, Henrik; Christiansen, Michael; Bech-Nielsen, Grith

    -creating way. The project meets the challenges above by contributing with two findings: First we present methods on how to carry out value generating interdisciplinary collaboration between the housing sector parties, such as residents, housing administration, politicians, advisors, producers and contractors...... contributes to the strengthening of knowledge sharing within the housing sector, and the creation of a framework for long term investments and jobs....

  4. Energy Renovation of a Typical Danish Single-family House

    DEFF Research Database (Denmark)

    Tommerup, Henrik M.; Svendsen, Svend

    2007-01-01

    In 2006, new tighter energy performance requirements were introduced in Denmark for both new buildings and renovation, including a new classification system for low energy buildings. These demands are based on the directive on Energy Performance of Buildings, the EPBD (2002/91/EC). In general the...... available on the internet: http://www.rwsc.dk/EP_Villa_Projektrapport_RW_DK/main_report_villa.pdf....

  5. Dwelling thermal renovation: which stakes, which solutions?

    International Nuclear Information System (INIS)

    Delduc, Paul; Demeulenaere, Laurence; Verdure, Mathieu; Ayong Le Kama, Alain; Fuk Chun Wing, Dimitri; Kiefer, Noemie; Mauroux, Amelie; Charlier, Dorothee; Hini, Sihame; Pinto Silva, Kleber; Giraudet, Louis Gaetan; Nauleau, Marie-Laure; Daussin-Benichou, Jeanne-Marie; Teissier, Olivier; Finidori, Esther; Grandjean, Alain; Allibe, Benoit; Gadrat, Pierre; Couriol, Aude; Menard, Francois; Rouquette, Celine; Houriez, Guillaume; Francois, Dominique; Aubert, Celine; Canardon, Daniel

    2015-01-01

    This publication proposes three sets of contributions. The first one addresses context and stakes. The contributions propose: a literature review on household behaviour and investments in energy efficiency, a focus on the key role of dwellings in energy transition through a comparative study of the four pathways of the National Debate for Energy Transition, and a discussion about consensus and uncertainties regarding the determining factors of heating temperature in dwellings. The second set addresses public policies and their assessment: improvement of the technical-economical assessment of the benefit of dwelling energetic renovations, discussion of the organisation and results of a survey on dwelling, equipment, and energy needs and uses, an analysis of several measures aimed at reaching objectives of energy efficiency of dwellings, a discussion of renovation works quality, a discussion of the impact of the sustainable development tax credit on thermal renovation, the optimisation of energy renovation in co-properties by third party financing, some foreign examples of policies in favour of dwelling thermal renovation. The third set of contributions addresses the needed technical, organisational and market evolutions: how the building sector can face the challenges of energy transition, the possibilities to propose innovative solutions adapted to existing housing buildings, and a comparative analysis of material and building equipment costs and market structures in Europe. Other texts are proposed in appendix: the origin of the Phebus survey, a description of incentive arrangements, and a map of climate zones in France

  6. Financial investments for zero energy houses

    DEFF Research Database (Denmark)

    Lepkova, Natalija; Zubka, Domantas; Jensen, Rasmus Lund

    2014-01-01

    The climate is constantly changing and is already affecting our future. The construction sector has become energy-intensive and a serious source of pollution. Today, houses use more energy and fossil fuels than ever before. In fact, buildings currently consume more than one-third of all energy......, but single-family houses should also be included in the renovation process and turned into zero energy buildings, which will be the standard in the near future of today’s construction sector. Read about the list of conclusions the investigations of a renovation project of a detached house into a nearzero...

  7. A multi-methodology and sustainability-supporting framework for implementation and assessment of a holistic building renovation: Implementation and assessment of a holistic sustainable building renovation

    DEFF Research Database (Denmark)

    Kamari, Aliakbar

    . The research strategy employed in this thesis presents characteristics of two research types, namely the qualitative research approach, and the inter- or transdisciplinary research throughout mode 2. It therefore calls for an inductive research approach and involves an interpretive approach and comparative...... a deep building renovation and an ordinary one is a commitment to a holistic approach in which objectives/criteria are targeted early in the design stages and subsequently are considered for their interdependence throughout sustainability perspectives. A review of recent research has revealed...... is entitled RE-VALUE . The case study is Section 3 of Skovgårdsparken located in Brabrand, Denmark. It is a social housing complex (including nine blocks), and has been renovated by Brabrand Housing Association. The future of the research in this thesis concerns expanding of the TSBD framework for Building...

  8. Environmental issues associated with R Reactor renovation and startup

    International Nuclear Information System (INIS)

    Marter, W.L.

    1982-01-01

    This memorandum identifies the more significant environmental issues that would be associated with renovation and startup of R Reactor to meet future demands for nuclear weapon materials. Some key environmental issues identified are: potential occupational radiation exposures associated with repairing the leaks in the reactor nozzles and thermal shield tanks and with renovating the disassembly basin facilities; the impacts of constructing additional cooling water pumping capacity; the effect of increased pumping on impingement and entrainment at the pump houses; thermal effects on the R Canal-precooler pond-Par Pond ecosystem from increased discharge of cooling water; and effects of increased water flow in Lower Three Runs Creek on biota and on cesium-137 remobilization

  9. Effectiveness of energy renovations : a reassessment based on actual consumption savings

    NARCIS (Netherlands)

    Filippidou, F.; Nieboer, N.E.T.; Visscher, H.J.

    2018-01-01

    Energy renovations offer unique opportunities to increase the energy efficiency of the built environment and for the existing housing stock; they are the most important solution. Usually, energy savings are based on modeling calculations. However, recent research has shown that the predicted

  10. Evaluation of airborne particulates and fungi during hospital renovation.

    Science.gov (United States)

    Overberger, P A; Wadowsky, R M; Schaper, M M

    1995-07-01

    This study was conducted over 30 weeks on a hospital floor undergoing partial renovation. Some patients housed on the floor were immunosuppressed, including bone marrow transplant recipients. The construction zone was placed under negative pressure and was separated from patient rooms by existing hospital walls and via erection of a temporary barrier. Other control measures minimized patient exposure to airborne materials. Air sampling was done for 3 weeks prior to construction, 24 weeks during construction, and 3 weeks after renovation was completed. Airborne particulate concentrations, total spore counts, particle size, and fungal species were assessed. At the beginning of the renovation there were increases in airborne particulates (from 0.2 to 2.0 mg/m3) and fungal spores (from 3.5 to 350 colony forming units (CFU/m3), but only in the construction zone. Throughout the remainder of the renovation, particulate and fungal spore levels fluctuated inside the construction zone but remained close to baseline values in the patient area. When renovation was completed, particulates and spore counts inside the construction zone decreased to preconstruction levels. The primary fungus isolated from air samples was Penicillium. This study demonstrated that control measures were effective in reducing exposures of hospitalized patients to airborne particulates and spores and in reducing the increased risk of aspergillosis and other fungal infections associated with hospital construction projects. The data from this study may be useful in establishing exposure guidelines for other health care settings.

  11. Control Strategies for Ventilative Cooling of Overheated Houses

    DEFF Research Database (Denmark)

    Psomas, Theofanis Ch.; Heiselberg, Per Kvols; Duer, Karsten

    2016-01-01

    -family house from the 1970s. The case study is renovated deeply and high- efficient (nZEB) creating two different scenarios. Mechanical ventilation system and manual control of the openings for both renovation scenarios cannot sufficiently eliminate the overheating risk indoors. The discharge coefficient...

  12. Energy renovation of Danish single-family houses Economy - barrier, motivation and limit

    DEFF Research Database (Denmark)

    Mortensen, Andrea; Heiselberg, Per Kvols; Plenge, Mary-Ann Knudstrup

    a large percentage who have not heard about the offers compared to the other income groups. There have been many reflections about energy saving initiatives and many of the initiatives have already been performed. There is however still a high number missing and particularly the depth of the renovation...... needs to be increased for Denmark to approach the defined objectives. The positive is that the listed tasks are predominantly carried out or considered to save energy, indicating that the homeowners are aware of this benefit. On the wish list presented to the homeowners, five wishes were selected.......000 DKK and 310.000DKK) are fair compared to the outcome, but when the needed investment is at 550.000 DKK and above, the majority think it is too expensive despite the benefits. The investment limit for the private renovations is defined on the basis on the homeowners’ interest in performing similar...

  13. Actual heating energy savings in thermally renovated Dutch dwellings

    International Nuclear Information System (INIS)

    Majcen, Daša; Itard, Laure; Visscher, Henk

    2016-01-01

    The register of the Dutch social housing stock was analysed, containing 300.000 dwellings, renovated between 2010 and 2013. The main objective was twofold: to evaluate the performance gap in these dwellings before and after the renovation and to establish what renovation measures achieve the highest reduction of consumption, particularly in practice (actual savings). The results showed large performance gaps in dwellings with low R and high U values, local heating systems, changes from a non-condensing into a condensing boiler and upgrades to a natural ventilation system. Regarding the actual effectiveness of renovation measures, replacement of old gas boilers with more efficient ones yields the highest energy reduction, followed by deep improvements of windows. Installing mechanical ventilation yields a small reduction compared to other measures, but still much larger than theoretically expected. The paper shows once more that the calculation method currently in use cannot be considered accurate if compared to actual consumption. The study demonstrated that unrealistic theoretical efficiencies of heating systems and insulation values are causing a part of the performance gap. Nowadays, large datasets of buildings thermal performance and actual consumption offer an opportunity to improve these misconceptions. - Highlights: • Performance gap is lower in more efficient buildings. • Replacements of gas boilers – the most energy reduction among renovation measures. • Replacing the ventilation system yields a much larger reduction than expected. • How well are the standard values of the calculation methods defined? • Provide large public building performance databases including actual use data.

  14. Effect of rearing factors on the prevalence of floor eggs, cloacal cannibalism and feather pecking in commercial flocks of loose housed laying hens.

    Science.gov (United States)

    Gunnarsson, S; Keeling, L J; Svedberg, J

    1999-03-01

    1. Effects of rearing conditions on behavioural problems were investigated in a cohort study of commercial flocks of laying hens housed in 2 different loose housing systems. The sample population was 120 385 laying hens from 59 flocks of various hybrids at 21 different farms. 2. Logistic regression modelling was used to test the effects of selected factors on floor eggs, cloacal cannibalism and feather pecking. In addition to early access to perches or litter, models included hybrid, stocking density, group size, housing system, age at delivery, identical housing system at the rearing farm and at the production farm and, in models for floor eggs and cloacal cannibalism, nest area per hen. Odds ratios were calculated from the results of the models to allow risk assessment. 3. No significant correlations were found between the prevalence of floor eggs, cloacal cannibalism and feather pecking. 4. Access to perches from not later than the 4th week of age decreased the prevalence of floor eggs during the period from start-of-lay until 35 weeks of age, odds ratio 0-30 (Pfeather pecking.

  15. The Integrated Renovation Process

    DEFF Research Database (Denmark)

    Galiotto, Nicolas; Heiselberg, Per; Knudstrup, Mary-Ann

    The Integrated Renovation Process (IRP) is a user customized methodology based on judiciously selected constructivist and interactive multi-criteria decision making methods (Galiotto, Heiselberg, & Knudstrup, 2014 (expected)). When applied for home renovation, the Integrated Renovation Process...

  16. Assessment of Flooring Renovations on African Elephant (Loxodonta africana) Behavior and Glucocorticoid Response

    Science.gov (United States)

    Boyle, Sarah A.; Roberts, Beth; Pope, Brittany M.; Blake, Margaret R.; Leavelle, Stephen E.; Marshall, Jennifer J.; Smith, Andrew; Hadicke, Amanda; Falcone, Josephine F.; Knott, Katrina; Kouba, Andrew J.

    2015-01-01

    Captive African (Loxodonta africana) and Asian (Elephas maximus) elephants can experience foot pathologies and arthritis. As a preventative measure against these pathologies and to alleviate the potential discomfort due to concrete substrates, some zoological institutions have renovated elephant housing to increase the amount of natural or shock-absorbent substrates. The objective of this study was to compare behavioral (diurnal and nocturnal) and glucorticoid (e.g., serum cortisol) responses of three female African elephants before, during, and after renovation to their indoor housing floor to assess whether renovations had short-term effects on the elephants’ behavior and stress physiology. Behavioral data were collected using scan-sampling methods, and activity budgets were constructed for each of the three elephants. In addition, the duration of all lying rest activities were recorded. Weekly serum cortisol concentrations were determined with enzyme immunoassay (EIA). Overall, eating was the most prevalent behavior exhibited outdoors during the day, while resting (either in a lying or standing position) were most common during the indoor, nocturnal periods. Although variation existed among the three elephants, all three females spent significantly more time walking and less time eating during the day after the completion of the renovations. The extent to which the three elephants exhibited nocturnal lying rest behavior varied among the elephants, with the oldest elephant exhibiting the least amount (an average of 13.2 ± 2.8% of the nightly behavioral scans) compared to the two younger elephants (an average of 34.5 ± 2.1% and 56.6 ± 2.8% of the nightly behavioral scans). There was a significant increase in lying rest behavior for one elephant and standing rest for a second elephant following renovations. Baseline cortisol concentrations prior to renovations were 3.0 ± 0.4 ng/ml, 4.5 ± 0.5 ng/ml, and 4.9 ± 0.5 ng/ml for the three elephants. Cortisol

  17. Assessment of Flooring Renovations on African Elephant (Loxodonta africana Behavior and Glucocorticoid Response.

    Directory of Open Access Journals (Sweden)

    Sarah A Boyle

    Full Text Available Captive African (Loxodonta africana and Asian (Elephas maximus elephants can experience foot pathologies and arthritis. As a preventative measure against these pathologies and to alleviate the potential discomfort due to concrete substrates, some zoological institutions have renovated elephant housing to increase the amount of natural or shock-absorbent substrates. The objective of this study was to compare behavioral (diurnal and nocturnal and glucorticoid (e.g., serum cortisol responses of three female African elephants before, during, and after renovation to their indoor housing floor to assess whether renovations had short-term effects on the elephants' behavior and stress physiology. Behavioral data were collected using scan-sampling methods, and activity budgets were constructed for each of the three elephants. In addition, the duration of all lying rest activities were recorded. Weekly serum cortisol concentrations were determined with enzyme immunoassay (EIA. Overall, eating was the most prevalent behavior exhibited outdoors during the day, while resting (either in a lying or standing position were most common during the indoor, nocturnal periods. Although variation existed among the three elephants, all three females spent significantly more time walking and less time eating during the day after the completion of the renovations. The extent to which the three elephants exhibited nocturnal lying rest behavior varied among the elephants, with the oldest elephant exhibiting the least amount (an average of 13.2 ± 2.8% of the nightly behavioral scans compared to the two younger elephants (an average of 34.5 ± 2.1% and 56.6 ± 2.8% of the nightly behavioral scans. There was a significant increase in lying rest behavior for one elephant and standing rest for a second elephant following renovations. Baseline cortisol concentrations prior to renovations were 3.0 ± 0.4 ng/ml, 4.5 ± 0.5 ng/ml, and 4.9 ± 0.5 ng/ml for the three elephants

  18. Roof top extensions for multifamily houses in Slovakia

    Science.gov (United States)

    Szekeres, K.

    2010-12-01

    In the countries of the European Union with the exception of Malta, approximately 100.1 million multifamily dwelling units are situated. These dwellings count for an average of 47.5% of the total housing stock in European Union countries. At present in Slovakia and also other countries of Central and Eastern Europe, there are vast housing areas which were built after World War II. Slovakia's multifamily housing stock was privatized during the 1990s. Considering that the economy of Slovakia is not capable of replacing the existing housing fund, which is located in the multifamily houses that were built after World War II, it is necessary to place an increased emphasis on the renovation of this housing fund. The expenditures for the refurbishment of multifamily housing stock in recent decades, when compared with the demand, have been at a very low level. The main problems involving the current multifamily housing stock in Slovakia are: the need for modernization, the low level of energy efficiency, and the insufficient level of building maintenance. One of the options for creating sufficient sources for the renovation of apartment buildings is to utilize the roofs of apartment buildings as construction areas for building additional floors (over - roofing). The means acquired from the sale of the new floors after deducting the costs can be used for renovation. It is a matter of a one-time possibility, which is limited by many factors that depend on the localization and constructive technical solutions for apartment buildings. This article is an outcome of the SuReFit "Sustainable Roof Extension Retrofit for High-Rise Social Housing in Europe" international research project.

  19. Indoor climate in renovated and energy retrofitted social housing

    DEFF Research Database (Denmark)

    Knudsen, Henrik Nellemose; Jensen, Ole Michael

    2016-01-01

    The need for energy retrofitting of the Danish single-family houses is massive, especially for the high proportion of single-family houses built in the 1960s and 1970s. But even though the potential benefits are many, only few families embark on a major energy retrofit. There may be many reasons...... for this. An obvious one may be limited knowledge of non-energy benefits, e.g. in relation to the indoor climate. The objective of this study was to explain this limited effort to save energy by identifying barriers and incentives among house owners in relation to energy retrofitting of one’s own house....... Moreover, it was investigated among house owners, who had carried out energy retrofitting, whether a number of factors, including the perceived indoor climate, became better or worse after retrofitting. A questionnaire survey was carried out among 1,990 house owners in a municipality north of Copenhagen...

  20. Development of energy renovation packages for Danish residential single family houses - parcel houses

    DEFF Research Database (Denmark)

    Pomianowski, Michal Zbigniew; Antonov, Yovko Ivanov; Heiselberg, Per Kvols

    Work presented in this technical report was developed as a port of Horizon 2020 EU project REFURB. The number of deep energy retrofits is falling behind the EU ambitious targets. The REFURB project aims at finding technical and nontechnical solutions that would match demand and supply side......-selected homeowner target groups was based on (I) selection of dwelling segment with high impact and energy saving potential. (II)Sequenced approach in creating package solutions. (III)Compelling offer to be proposed with specific timing. This report focuses mainly on the second listed component, namely, development...... of the residential building renovation market. Due to the multiple significant differences at the national level, compelling offers were developed specifically for each country participant. This report elaborates only on Danish approach, as stated in [1], the Danish approach to create compelling offers for pre...

  1. Preweaning mortality in piglets in loose-housed herds: etiology and prevalence.

    Science.gov (United States)

    Kielland, C; Wisløff, H; Valheim, M; Fauske, A K; Reksen, O; Framstad, T

    2018-01-08

    Preweaning mortality in piglets is a welfare issue, as well as an ethical and economic concern in commercial pig farming. Studying the causes of preweaning mortality and their prevalence is necessary to reduce losses. Preweaning piglet mortality was investigated in a field study including 347 sows from 14 loose-housed Norwegian piglet-producing herds. A total of 5254 piglets were born in these herds during the study period, and 1200 piglets were necropsied. The cause of death was based on pathoanatomical diagnosis (PAD). Preweaning mortality of all piglets in the study was 23.4%, including 6.3% stillborn. The two main causes of preweaning mortality in live-born piglets (n=4924) were trauma (7.1%) and starvation (2.7%). Piglets dying of an infection accounted for 2.0%. Among the necropsied piglets (n=1200), 29.1% had died due to trauma, 26.8% were categorized as stillborn and 11% had died of starvation. Piglets that had died of trauma, had a mean time of death of 1 lactation day (LD 1), ranging from LD 0 to LD 21. The mean time of death of piglets that died due to bacterial infection was LD 9, ranging from LD 0 to LD 31, with Escherichia coli accounting for most infections found in necropsied piglets. Farmers were able to identify death by trauma in piglets, but were less able to identify death due to hunger. Most piglets that died in the preweaning period, died of trauma. Surprisingly, this included large and well-fed piglets. The second most prevalent cause of preweaning mortality was starvation. Improved monitoring may reveal piglets with low body mass index, and additional nutrition may contribute to increase the survival rate.

  2. 25 CFR 256.23 - How will I be advised that the repair, renovation or replacement of my dwelling has been completed?

    Science.gov (United States)

    2010-04-01

    ... replacement of my dwelling has been completed? 256.23 Section 256.23 Indians BUREAU OF INDIAN AFFAIRS..., renovation or replacement of my dwelling has been completed? The servicing housing office will advise you, in... final walk-through of the dwelling with your servicing housing office representative. You will be...

  3. The Integrated Renovation Process

    DEFF Research Database (Denmark)

    Galiotto, Nicolas; Heiselberg, Per; Knudstrup, Mary-Ann

    they get more time for the cost optimization and the qualitative analysis of the users’ needs and behaviours. In order to reach a fossil free energy building stock within an acceptable time frame, it is primordial that researchers, politicians and the building industry work hand in hand. Indeed, in order...... to overcome the financial barriers to energy renovation and bring a new type of building experts in the building renovation sector, cost optimization tools for building renovation have been and can be developed but new legislation and politico-economic supports are still much needed. We present in this report...... a new contribution from the research and industry sides and results reached with the newly developed methodology, but without a significant contribution from the politico-economic and legislation sides . The experiences met during application of the Integrated Renovation Process are described...

  4. The Integrated Renovation Process

    DEFF Research Database (Denmark)

    Galiotto, Nicolas; Heiselberg, Per; Knudstrup, Mary-Ann

    2015-01-01

    the project stakeholders to overcome most informational barriers to sustainable home renovation such as lack of knowledge, lack of interest, lack of support, and lack of social and emotional understanding. The homeowners were able to perceive the new and numerous qualities they were getting in their newly......The potential for primary energy savings is greatest in the building sector. A very relevant way to save energy is to increase the rates and depths of building renovations. In order to reach such goals, building owners need to be convinced to invest in high-performance sustainable renovation...

  5. The Integrated Renovation Process

    DEFF Research Database (Denmark)

    Galiotto, Nicolas

    and constructivist multiple criteria decision-making analysis method is selected for developing the work further. The method is introduced and applied to the renovation of a multi-residential historic building. Furthermore, a new scheme, the Integrated Renovation Process, is presented. Finally, the methodology...... is applied to two single-family homes. In practice, such a scheme allowed most informational barriers to sustainable home renovation to be overcome. The homeowners were better integrated and their preferences and immaterial values were better taken into account. They assimilated the multiple benefits...... to keep the decision making process economically viable and timely, the process still needs to be improved and new tools need to be developed....

  6. Integrated Renovation Process

    DEFF Research Database (Denmark)

    Galiotto, Nicolas; Heiselberg, Per; Knudstrup, Mary-Ann

    2016-01-01

    renovation to be overcome. The homeowners were better integrated and their preferences and immaterial values were better taken into account. To keep the decision-making process economically viable and timely, the process as known today still needs to be improved, and new tools need to be developed....... This paper presents a new scheme: the integrated renovation process. One successful case study is introduced, and recommendations for future developments needed in the field are provided....

  7. Loose part monitoring device

    International Nuclear Information System (INIS)

    Nomura, Hiroshi.

    1992-01-01

    The device of the present invention estimates a place where loose parts occur and structural components as the loose parts in a fluid flow channel of a reactor device, to provide information thereof to a plant operator. That is, the device of the present invention comprises (1) a plurality of detectors disposed to each of equipments constituting fluid channels, (2) an abnormal sound sensing device for sensing signals from the detectors, (3) an estimation section for estimating the place where the loose parts occur and the structural components thereof based on the signals sensed by the abnormal sound sensing section, (4) a memory section for storing data of the plant structure necessary for the estimation, and (5) a display section for displaying the result of the estimation. In such a device, the position where the loose parts collide against the plant structural component and the energy thereof are estimated. The dropping path of the loose parts is estimated from the estimation position. Parts to be loose parts in the path are listed up. The parts on the list is selected based on the estimated energy thereby enabling to determine the loose parts. (I.S.)

  8. The Phenomenon of Trust in Flat Owners’ Collective Renovation Strategies in Estonia

    Directory of Open Access Journals (Sweden)

    Liis Ojamäe

    2015-12-01

    Full Text Available Mobilising fl at owners into renovating residential blocks in post-socialist countries has been a complicated process. Evidence from Estonia shows that the success of collective renewal strategies depends not only on economic issues but also on ways investments are organised and, signifi cantly, the relationship of trust between diff erent actors. The paper aims at conceptualising the issue of institutional trust upon the experience of urban housing renewal in Estonia. It is contended that trust is crucial for the joint decision-making in a block as well as for facilitating negotiations between fl at owners’ associations, local municipalities and market actors. The paper draws on three qualitative studies conducted in Estonia during the 2000s, which allow asserting that trust towards new strategies of housing renewal can be achieved and maintained by ‘best practices’, which by concentrating expert knowledge also denote direct communication between experts and fl at owners. While it is important to raise the residents’ technical knowledgeability, it is indispensable to develop abilities to manage and communicate the renovation process between diff erent parties. The public sector is conceived to be a central actor in sustaining trust between actors who have no previous positive experience from collective residential strategies

  9. Housing conditions and respiratory health in a Boston public housing community.

    Science.gov (United States)

    Brugge, D; Rice, P W; Terry, P; Howard, L; Best, J

    2001-01-01

    To determine frequency of and possible associations between environmental housing factors and self-reported respiratory symptoms in public housing. We used a community-participatory method in which trained residents conducted in-person interviews with a random sample of 53 households in one housing development in Boston, Massachusetts. Environmental factors suspected of affecting respiratory health that were reported by more than 30 percent of respondents included: Moisture (43 percent), mold (43 percent), cracks in walls, floors and ceilings (49 percent), sewage leaks (33 percent), unexplained odor (35 percent), use of air fresheners (91 percent), use of gas ovens for heating (38 percent), no vent for the oven (74 percent), stuffy air (66 percent), overheating at least part of the winter (73 percent), cockroaches (70 percent), rodents (40 percent), pets (39 percent), frequent renovations (40 percent), repeated requests for repairs (52 percent), dust from construction (45 percent), use of more than three hazardous household products (32 percent), vehicle traffic nearby (81 percent), and smoking in the household (57 percent). Forty percent of respondents reported having asthma. Respondents also reported that 56 percent of their children had asthma. Forty percent of respondents reported wheeze and 48 percent reported coughing or sneezing episodes in the preceding month. We found the following positive statistically significant associations, adjusted for age, sex, Black or Hispanic origin, and years lived in public housing: wheeze with moisture problems (OR = 4.8; CI = 1.2, 19.3), sewage leaks (OR = 6.3; CI = 1.3, 30.3), odor (OR = 7.5; CI = 1 .4, 39.0), cracks in walls,floors and ceilings (OR = 8.6; CI 1.9, 38.0), and frequency of renovations (OR = 9.8; CI = 1.8, 54.4); cough with moisture problems (OR = 5.3; CI = 1.3, 20.8), stuffy air (OR = 4.4; CI = 1.2, 16.7), cockroaches (OR = 5.4; CI = 1.2, 24.2), smoking (OR = 5.0; CI = 1.2, 20.5), odor (OR = 10.9; CI = 2

  10. Assessment of current Dutch energy transition policy instruments for the existing housing stock

    International Nuclear Information System (INIS)

    Tambach, Milly; Hasselaar, Evert; Itard, Laure

    2010-01-01

    This research assesses to what extent current Dutch energy transition policy instruments for the existing housing stock can fulfil local executive actors' needs and instigate adoption of energy efficiency measures by them. This is done by studying energy policy instruments for the existing housing stock in the Netherlands and in other European countries, and by an empirical research, which analyses barriers and needs of local executive actors. We found that, despite current Dutch energy transition policy instruments for the existing housing stock seem to fulfil local executive actors' needs to a large extent, complementary policy instruments are needed to stimulate and pressure the incumbent renovation regime. A long-term oriented financial rewarding system is needed to build up a structural market for the deployment of renewables, to increase the number of specialist jobs in the building sector, and to stimulate the development of integrated, standardized, building components. Furthermore, a long-term oriented financial rewarding system for energy efficiency investments in housing renovation projects, and a low VAT rate applied to energy efficient renovation measures, are needed. Finally, enforcement possibilities and sanctions (fines) should become an integrative part of Dutch energy certification regulation to make the certificate become part of a value chain.

  11. Sustainable solutions for Dutch housing. Reducing the Environmental Impacts of New and Existing Houses

    Energy Technology Data Exchange (ETDEWEB)

    Klunder, G.

    2005-04-12

    Sustainable housing construction and management has, to date, been primarily based on an intuitive approach. Numerous measures have been formulated to promote sustainable construction and to reduce the environmental impacts of the built environment. However, little is yet known about the extent of the environmental benefits thereof. Moreover, methods and tools are mainly directed to new construction. This thesis makes clear that short-term environmental benefits in sustainable housing construction are rather limited. Renewal of the post-war housing stock offers excellent changes for improvement of the environmental performance of housing. With a newly developed method it is proven that renovation causes less environmental impacts than demolition followed by new construction. However, at the same time the usefulness of Life Cycle Assessment for buildings is doubted.

  12. Kinds of initial billets in renovation technologies

    Directory of Open Access Journals (Sweden)

    V. M. Yaroslavtsev

    2014-01-01

    Full Text Available Nowadays, technologists in charge of repair, restoration, modernization, and utilization of engineering and other tangible objects widely use the concepts "renovation" and "renovation technologies" pioneered at BMSTU. In forming a new field of science these concepts, in the proper sense of the word, are of composite, generalized character. They concern all the activities and technologies aimed at increasing an object resource or its lifecycle extension, including object material recycling.In the cutting-edge renovation technologies an object (part, assembly, machine, etc. damaged in the operating process is considered to be an initial billet. In renovation, one of the most widespread kinds of initial billets is a damaged part.Such a part can be used again, if, for example, it has saved its material properties in full measure while only contact surfaces or parts of these surfaces have become damaged, and at a point of renovation they can be restored for recycling. If a part has lost its initial properties in full bulk of material, it may be reusable in the assemblies and machines with less rigid requirements for material properties.Or in case of properties loss below the permissible level a damaged part-billet is utilized. Thus, the part-billet state at the point of renovation defines the kind of renovation technology and the main (basic technological method to effect on the damaged part, as well as a set and a sequence of technological methods in general manufacturing process of renovation.However renovation technologies are used not only at the repair and restoration stages after operation-service. So, at the manufacturing stage of a new product to provide the quality to raise a resource are applied the same technological methods as renovation technologies for the objects damaged at the stage of operation. Besides, it is known that at the manufacturing stage a part quality depends not only on the last operation, but also on the features of

  13. The Optimal Time of Renovating a Mall

    OpenAIRE

    K.C. Wong; George Norman

    1994-01-01

    This paper presents a maximization model determining the optimal time at which a mall should be renovated. The analysis is constructed on the assumption of a decreasing rental income over time as a mall ages. It is then shown that the optimal renovation period achieves a balance between the marginal cost and benefits of delaying renovation. We show how this balance is affected by changes in the discount rate, net rental incomes, and renovation costs. Numerical simulations are used to demonstr...

  14. Integrated project delivery methods for energy renovation of social housing

    NARCIS (Netherlands)

    Salcedo Rahola, T.B.

    2015-01-01

    European Social Housing Organisations (SHOs) are currently facing challenging times. The ageing of their housing stock and the economic crisis, which has affected both their finances and the finances of their tenants, are testing their capacity to stick to their aim of providing decent and

  15. Composite bulk Heat Insulation Made of loose Mineral and Organic Aggregate

    Directory of Open Access Journals (Sweden)

    Namsone Eva

    2015-12-01

    Full Text Available The task of building energy-efficiency is getting more important. Every house owner wishes to save up exploitation costs of heating, cooling, hot water production, ventilation, etc. and find cost-effective investments. One of the ways to reduce greenhouse gas emissions (GHGE is to minimize the heat transfer through the building by insulating it. Loose heat insulation is a good alternative to traditional board insulation, it is simple in use and cost-effective. Main drawback of this insulation is tendency to compact during exploitation. In the frame of this research composite loose heat insulation is elaborated, consisting on porous mineral foamed glass aggregate and local organic fiber materials (hemp and flaxen shives. Composite bulk insulation is an alternative solution which combines heat insulating properties and mechanical stability.

  16. Energy renovation practices in Danish homes. The influence of energy labels on home renovation practices

    Energy Technology Data Exchange (ETDEWEB)

    Christensen, Toke Haunstrup; Gram-Hanssen, Kirsten [Danish Building Research Institute, Aalborg University, Dr. Neergaards Vej 15, DK-2970 Hoersholm (Denmark); Adjei, Afi [Building Research Establishment Ltd. BRE, Bucknalls Lane, Garston, WD25 9XX Watford (United Kingdom); De Best-Waldhober, Marjolein [Energy research Centre of the Netherlands ECN, Policy Studies, Amsterdam (Netherlands)

    2012-02-15

    Heating of dwellings represents a major policy challenge for the transition to a low carbon society. In Denmark, heating of dwellings represents about 25% of the total Danish final energy consumption and about 13% of the total CO2 emission. The majority of this is related to heating of older dwellings, and as the rate of replacement is low, the main potential for energy saving is to improve the energy efficiency of the existing dwelling stock through energy renovation. This paper provides an analysis of Danish experiences with energy labels (also known as the Energy Performance Certificate, EPC), which indicate the energy efficiency of buildings and include recommendations for improvements. The aim of the EPC is to motivate homeowners to do energy improvements. In Denmark, energy audit schemes date back to the early 1980s and energy rating of houses (energy labelling) was introduced in 1997. The long history of energy audit schemes and energy labelling makes Denmark an interesting case for the study of the experiences with and impact of this kind of policy measure. With the EU Energy Performance of Buildings Directive (EPBD) from 2002, an energy labelling scheme similar to the Danish scheme introduced in 1997 is now in use in all EU member states. The focus of this paper is on the homeowners' experience and use of the EPC and the key research questions are: How do the homeowners understand and use the EPC? Does the EPC have an influence on home energy renovation practices? The analysis is based on results from a survey of Danish homeowners who have purchased a home with an EPC within recent years. The Danish survey is part of the European project IDEAL EPBD, which was funded by the European Commission under the Intelligent Energy Europe programme and run from 2008 to 2011. The results indicate a rather limited influence of the EPC on Danish homeowners' home energy renovation practices. Also, the results show that even though most homeowners find the label

  17. Chain collaboration between an housing corporation and two general contractors, the first steps

    NARCIS (Netherlands)

    Koolwijk, J.S.J.

    2011-01-01

    Several housing corporations in the Netherlands have realized they cannot do it alone if they want to renovate their housing stock faster, cheaper and with a higher quality. More and more of these corporations are forming strategic alliances with contractors and other partners to reach these goals.

  18. Solutions for improved sound insulation in old housing

    DEFF Research Database (Denmark)

    Hoffmeyer, Dan; Rasmussen, Birgit

    ), Denmark. [2] Projects “Bedre lydisolering i nyrenoverede boliger” (Better sound insulation in newly renovated homes). Danish Ministry of Housing and Building & GI (The Danish Landowners Investment Fund). 1999-2006. Several publications, incl. a brochure/flyer and website: http://ejendomsviden.dk/Nabostoj...

  19. Potential energy savings in renovation projects of residential and service buildings; Energiansaeaestoemahdollisuudet rakennuskannan korjaustoiminnassa

    Energy Technology Data Exchange (ETDEWEB)

    Heljo, J.; Vihola, J.

    2012-11-01

    be only half of that. The biggest uncertainty in the estimation of savings potential is related to increased ventilation heat recovery especially in blocks of flats. Based on calculations, the energy consumption of the residential and service building stock in existence in 2010 will drop from 91 TWh/a to less than 50 TWh/a in 2050. Consumption will be reduced by structural energy-saving measures, changes in heating methods and loss of stock. It is possible to attain nearly 20% savings, about 10 TWh/a, in the 2010 building stock through renovation measures by 2050. The greenhouse gas emissions from the energy used in buildings will be cut by energy savings as well as an increase in nuclear power-generated electricity and wider use of renewable fuels in the generation of district heat and electricity. Moreover, emissions will be reduced, especially in detached houses, by switching to heating systems that produce fewer emissions. These changes in energy supply will probably cut the green-house emissions of the building stock more than energy-saving measures in buildings. Yet, both are necessary to attain the reduction goals. (orig.)

  20. Energy renovation solutions - catalogue; Energirenoveringstiltag - katalog

    Energy Technology Data Exchange (ETDEWEB)

    Tommerup, H.

    2010-07-15

    The project's aim has been to develop methods and examples of extensive energy renovations to stimulate energy conservation and increased use of renewable energy in existing buildings. The current report represents an extensive technology catalogue of typical energy renovation measures in connection with the renovation of existing buildings. For every action the main aspects are explained concerning such issues as technology, use, barriers, indoor climate, energy conservation and prices. The report is mainly targeted at construction industry, but also many other stakeholders can benefit from the report. (ln)

  1. Learning from best practice low energy housing retrofit

    NARCIS (Netherlands)

    Mlecnik, E.; Hilderson, W.; Cré, J.

    2010-01-01

    Europe now expects an evolution of the building sector towards „near zero energy? buildings. In Belgium, the passive house concept offers a feasible portal towards 0-energy developments. Meanwhile, for the major market of renovations, we still have to learn-by-doing what is achievable from

  2. Housing Bubbles and Monetary Policy: A Reassessment

    OpenAIRE

    O'Meara, Graeme

    2015-01-01

    This study contributes to the ongoing debate over the causes of housing bubbles. The argument that excessively low interest rates were responsible for the run up in house prices over the last decade has received considerable attention in the literature. However, few papers have attempted to quantify the extent of house price overvaluation in countries that have seen housing booms and busts, in addition to quantifying the looseness of monetary policy. For a sample of 10 OECD countries, we es...

  3. Promotion of Sustainable Renovation in Europe

    DEFF Research Database (Denmark)

    Fokaides, Paris A.; Kanarachos, Andreas; Kanarachos, Georgette

    2013-01-01

    pressing the energy renovation of buildings. Both the obstacles and the contribution of national regulations will be discussed, towards promotion of sustainable renovation in Europe today. This study is also expected to report on research initiatives currently being undertaken in Europe on the energy...

  4. Indoor climate quality after renovation for improved energy efficiency

    DEFF Research Database (Denmark)

    Gunnarsen, Lars Bo; Løck, Sebastian; Kolarik, Barbara

    2016-01-01

    The building sector is responsible for approximately 40 % of the Danish energy consumption. As every year less than 1 % of the building stock is rebuild after demolition of old buildings, improved energy efficiency of existing buildings are in focus. In the late seventies to mid-eighties unwise...... performance. The indoor quality classifications show minor improvements. By using design tools beyond the simple legal requirements, the rental dwelling marked is a far step ahead of most retrofitting of owner-occupied dwellings and houses. The fear of indoor climate degradation from retrofitted energy saving...... measures may be countered by the use of modern design tools and attention to inner moisture membranes and needs for renovation of ventilation systems....

  5. Measurement of loose powder density

    International Nuclear Information System (INIS)

    Akhtar, S.; Ali, A.; Haider, A.; Farooque, M.

    2011-01-01

    Powder metallurgy is a conventional technique for making engineering articles from powders. Main objective is to produce final products with the highest possible uniform density, which depends on the initial loose powder characteristics. Producing, handling, characterizing and compacting materials in loose powder form are part of the manufacturing processes. Density of loose metallic or ceramic powder is an important parameter for die design. Loose powder density is required for calculating the exact mass of powder to fill the die cavity for producing intended green density of the powder compact. To fulfill this requirement of powder metallurgical processing, a loose powder density meter as per ASTM standards is designed and fabricated for measurement of density. The density of free flowing metallic powders can be determined using Hall flow meter funnel and density cup of 25 cm/sup 3/ volume. Density of metal powders like cobalt, manganese, spherical bronze and pure iron is measured and results are obtained with 99.9% accuracy. (author)

  6. Bæredygtige systemleverancer ved renovering

    DEFF Research Database (Denmark)

    Schipull Kauschen, Jan

    2014-01-01

    System (PSS). This thesis presents the hypothesis that system deliveries may be cast as Product-Service Systems, creating the pre-conditions for sustainable integrated product deliveries. Case Studies Renovation case studies have evinced partial use of system deliveries in recent years; however......-of-sales er dermed relevant for bæredygtige leverancer, der disse kræver at ansvaret forbliver hos systemejeren over leverancens hele livscyklus, fra produktion til bortskaffelsen. Denne type produkt kendes fra andre områder under navnet Product-Service-System (PSS). I afhandlingen opstilles derfor hypotesen...... om at systemleverancer kan udformes som Product-Service-Systems og at dermed skabes forudsætningerne for bæredygtige systemleverancer. Casestudier Casestudier om renovering har desuden vist, at der til dels anvendes systemleverancer til renovering i de sidste år, men at disse leverancer sjældent er...

  7. Extensive renovation the pathology of heritage building

    DEFF Research Database (Denmark)

    Rasmussen, Torben Valdbjørn

    2015-01-01

    The pathology of heritage buildings is often related to renovation initiatives typically initiated by implementing energy savings measures.......The pathology of heritage buildings is often related to renovation initiatives typically initiated by implementing energy savings measures....

  8. Extensive renovation the pathology of heritage buildings

    DEFF Research Database (Denmark)

    Rasmussen, Torben Valdbjørn

    2015-01-01

    The pathology of heritage buildings is often related to renovation initiatives typically initiated by implementing energy savings measures.......The pathology of heritage buildings is often related to renovation initiatives typically initiated by implementing energy savings measures....

  9. Housing associations and ventilation. Program Requirements for Domestic Ventilation for new construction and renovation (version 2.0); Woningcorporaties en ventilatie. Programma van Eisen voor Woningventilatie voor nieuwbouw en renovatie (versie 2.0)

    Energy Technology Data Exchange (ETDEWEB)

    Balvers, J.; Boerstra, A. [BBA Binnenmilieu, Rotterdam (Netherlands)

    2011-11-15

    The aim of the title project is to develop a base of Program Requirements (PvE, abbreviated in Dutch) that employees of housing associations can use as a starting point to achieve ventilation systems in new construction and renovation of housing projects. The tool comprises of three parts: Instructions the for use of the PvE (Chapter 1); PvE for homes with balanced ventilation, including explanatory notes (Chapter 2); PvE for homes with natural ventilation and mechanical exhaust system, including explanatory notes (Chapter 3) [Dutch] Het doel van het project is het ontwikkelen van een basis Programma van Eisen (PvE) dat medewerkers van woningcorporaties als uitgangspunt kunnen gebruiken bij het realiseren van ventilatiesystemen in nieuwbouw en renovatie van woningbouwprojecten. Het instrument bestaat uit 3 delen: Aanwijzingen voor het gebruik van de PvE's (hoofdstuk 1); PvE voor woningen met balansventilatie, inclusief toelichting (hoofdstuk 2); PvE voor woningen met natuurlijke luchttoevoer en mechanische luchtafvoer, inclusief toelichting (hoofdstuk 3)

  10. Barriers and Potential Solutions for Energy Renovation of Buildings in Denmark

    Directory of Open Access Journals (Sweden)

    Niels I. Meyer

    2014-02-01

    Full Text Available Buildings account for a substantial part of the total energy consumption. In Denmark this number is about 40 % and this is approximately the same in most industrial countries. On this background there is an urgent need to develop strategies for reducing the energy demand in the building sector. Renovation of existing buildings must have high priority as houses often last for 50 to 100 years, while the time perspective for the desired transformation to low-energy houses is less than 30 years in order to mitigate global warming and avoid irreversible tipping-points. The only sustainable energy supply in the perspective of centuries is renewable energy provided by the sun and exploited in the form of solar heat, solar electricity (PVs, wind power, hydropower, wave power, and some types of biomass etc. A future dominating role of intermittent renewable sources requires new integrated systems thinking on both the supply and demand side for heat, electricity and transport. Implementing such Smart Energy Systems requires integrated strategic energy planning on the national and local level. With the fundamental changes in the energy supply technologies expected during the coming years, it is important to synchronize investments in energy conservation measures with investments in the supply side, in order to avoid overinvestment in supply systems and thus to minimize the total costs of the transformation to Smart Energy Systems. This paper highlights some of the most important barriers for renovation of existing buildings in Denmark and points to policies for overcoming these barriers. Some of the policies have been presented in the reports of a recent Danish research project (CEESA

  11. Effects of pasture renovation on hydrology, nutrient runoff, and forage yield.

    Science.gov (United States)

    de Koff, J P; Moore, P A; Formica, J; Van Eps, M; DeLaune, P B

    2011-01-01

    Proper pasture management is important in promoting optimal forage growth and reducing runoff and nutrient loss. Pasture renovation is a management tool that improves aeration by mechanically creating holes or pockets within the soil. Pasture renovation was performed before manure application (poultry litter or swine slurry) on different pasture soils and rainfall simulations were conducted to identify the effects of pasture renovation on nutrient runoff and forage growth. Renovation of small plots resulted in significant and beneficial hydrological changes. During the first rainfall simulation, runoff volumes were 45 to 74% lower for seven out of eight renovated treatments, and infiltration rates increased by 3 to 87% for all renovated treatments as compared with nonrenovated treatments. Renovation of pasture soils fertilized with poultry litter led to significant reductions in dissolved reactive P (DRP) (74-87%), total P (TP) (76-85%), and total nitrogen (TN) (72-80%) loads in two of the three soils studied during the first rainfall simulation. Renovation did not result in any significant differences in forage yields. Overall, beneficial impacts of renovation lasted up to 3 mo, the most critical period for nutrient runoff following manure application. Therefore, renovation could be an important best management practice in these areas.

  12. Distinctiveness of Initial Preform Properties in Renovation

    Directory of Open Access Journals (Sweden)

    V. M. Yaroslavtsev

    2015-01-01

    Full Text Available Technologies of renovation form a special group of resource-and energy saving technological processes as they are, by definition, already aimed either at increasing resource of the objects satisfying needs of the society life support and practical activities in different spheres, or at extension of their life cycle including a reuse of material from which they are made. Renovation is used where there is a material object, which does not meet requirements of standard or technical documentation.A characteristic feature of the renovation technologies is lack of procedure for a choice of the preform as in all cases an initial preform is the renovation object itself. Thus each object, acting as an initial preform, has the exclusively individual properties, including technological ones.Distinctiveness of renovation object properties is correlated, first of all, with the personified conditions of formation and (or change of condition of their properties in time at all stages of life cycle (production – transportation – warehousing – operation starting with a preform material when manufacturing under all types of loadings (technological and operational. As a result each object forms its "history" of loading and damages and, therefore, its information base which has to consider the phenomenon of “heredity of life cycle”. The term "heredity of life cycle" characterizes information support of object at any moment under review, including both information of technological inheritance, and data of operational heredity.As a result at every moment of time we have a product with a set of new, uncertain properties caused by the phenomena of heredity of life cycle. These properties are individual for each object to be renovated, which changed its status for the status of initial preform for different types of renovation technologies. This is one of the most important distinctions of renovation technology from the technology used to manufacture a new

  13. Value based building renovation - A tool for decision-making and evaluation

    DEFF Research Database (Denmark)

    Jensen, Per Anker; Maslesa, Esmir

    2015-01-01

    Research on the barriers for building renovation in Denmark has revealed that an important obstacle is a lack of simple and holistic tools that can assist stakeholders in prioritisation and decision-making during the early stages of building renovation projects. The purpose of this article...... is to present a tool - RENO-EVALUE, which can be used as decision support for sustainable renovation projects, and for evaluation, during and after building renovations. The tool is a result from the European Eracobuild project ACES - "A concept for promotion of sustainable retrofitting and renovation in early...... stages". This article presents the main result of a work package concerning benefits of renovation. RENO-EVALUE has been developed from four case studies on renovation projects in Denmark, tested and validated on the cases and in a Delphi study. The tool is value based by focusing on the different...

  14. Barriers to installing innovative energy systems in existing housing stock identified

    NARCIS (Netherlands)

    Hoppe, Thomas

    2013-01-01

    Several barriers to upgrading existing social housing with innovative energy systems (IES) have been identified by a study of eight large-scale renovation projects in the Netherlands. These include a lack of trust between stakeholders, opposition from tenants on grounds of increased costs or delays,

  15. Loose Graph Simulations

    DEFF Research Database (Denmark)

    Mansutti, Alessio; Miculan, Marino; Peressotti, Marco

    2017-01-01

    We introduce loose graph simulations (LGS), a new notion about labelled graphs which subsumes in an intuitive and natural way subgraph isomorphism (SGI), regular language pattern matching (RLPM) and graph simulation (GS). Being a unification of all these notions, LGS allows us to express directly...... also problems which are “mixed” instances of previous ones, and hence which would not fit easily in any of them. After the definition and some examples, we show that the problem of finding loose graph simulations is NP-complete, we provide formal translation of SGI, RLPM, and GS into LGSs, and we give...

  16. Renovation and uprating of seven hydropower plants in Java

    International Nuclear Information System (INIS)

    Nuessli, W.

    1991-01-01

    The Indonesian Power Authority is planning to renovate and uprate seven hydropower stations in Java to expand plant life expectancy, ensure operating safety and reliability, and increase power and generation within economical limits. The power plants were constructed in the early 1920s and extended between 1945 and 1950. Their capacities vary between 4 and 20 MW. For the renovation project, Colenco Power Consulting Ltd. is acting as a consultant to PLN. In February 1990, Colenco inspected all seven power plants. The results of the inspections served as the basis for the development of renovation plans for each of the seven hydropower plants. To determine the cost of the proposed renovation plans, appraisers had to determine a method for comparing the value of an existing plant to that of a renovated one. The two different evaluation methods used for these comparisons are the focus of this paper

  17. Energy Efficiency and Universal Design in Home Renovations - A Comparative Review.

    Science.gov (United States)

    Kapedani, Ermal; Herssens, Jasmien; Verbeeck, Griet

    2016-01-01

    Policy and societal objectives indicate a large need for housing renovations that both accommodate lifelong living and significantly increase energy efficiency. However, these two areas of research are not yet examined in conjunction and this paper hypothesizes this as a missed opportunity to create better renovation concepts. The paper outlines a comparative review on research in Energy Efficiency and Universal Design in order to find the similarities and differences in both depth and breadth of knowledge. Scientific literature in the two fields reveals a disparate depth of knowledge in areas of theory, research approach, and degree of implementation in society. Universal Design and Energy Efficiency are part of a trajectory of expanding scope towards greater sustainability and, although social urgency has been a driver of the research intensity and approach in both fields, in energy efficiency there is an engineering, problem solving approach while Universal Design has a more sociological, user-focused one. These different approaches are reflected in the way home owners in Energy Efficiency research are viewed as consumers and decision makers whose drivers are studied, while Universal Design treats home owners as informants in the design process and studies their needs. There is an inherent difficulty in directly merging Universal Design and Energy Efficiency at a conceptual level because Energy Efficiency is understood as a set of measures, i.e. a product, while Universal Design is part of a (design) process. The conceptual difference is apparent in their implementation as well. Internationally energy efficiency in housing has been largely imposed through legislation, while legislation directly mandating Universal Design is either non-existent or it has an explicit focus on accessibility. However, Energy Efficiency and Universal Design can be complementary concepts and, even though it is more complex than expected, the combination offers possibilities to advance

  18. Renovate Right: Prevent Lead Poisoning in Children

    Centers for Disease Control (CDC) Podcasts

    In this podcast, Dr. Maria Doa, Director of the Environmental Protection Agency's (EPA) National Program Chemicals Division, discusses EPA's new rule for renovations, repairs, and painting activities. The new rule includes information on lead-safe work practices when conducting renovations, repairs, and painting in pre-1978 homes and schools to prevent the spread of lead dust.

  19. The importance of social housing in sustainable development

    Directory of Open Access Journals (Sweden)

    Zuzanna Rataj

    2017-07-01

    Full Text Available The term sustainable development has been recently substantially expanded. It originally referred to natural environment, yet currently it covers more and more areas, including economic and social layers. The aim of this paper is to discuss the role of social housing in sustainable development. The issue of affordable housing within this context has been rarely addressed (e.g. Zaniewska, Thiel, IRM reports and is thus an interesting field of research. Based on the available literature and statistical data, the authors show the importance of social housing for sustainable development. It is crucial to provide equal access to housing, counteract social exclusion and curb energy consumption by improving thermal efficiency and renovating residential buildings. Some information contained in this paper was obtained while conducting the research project ‘Social housing and its role in satisfying the housing needs of indigent households in Poland’ financed by the National Science Centre (2014/13/N/HS4/02100.

  20. The building stock from perspective of change - renovation roadmap

    Energy Technology Data Exchange (ETDEWEB)

    Airaksinen, M., Email: miimu.airaksinen@vtt.fi

    2012-06-15

    By 2050, population, society and economic structures will have changed several times. The long and short-term goals and objectives concerning our built environment are mutually contradictory. Determining objectives or creating scenarios for the future built environment is fruitless. We should approach the development of the built environment from the perspective of change and improve the flexibility and adaptability of the built environment. For the users, a built environment meeting their basic needs is part of sustainable development. Identified short-range renovation needs include eliminating damp and mould problems, improving energy and eco-efficiency, removing obstacles to mobility and adapting buildings to accommodate the needs of the elderly. Vacated areas and buildings should be recycled and offered a new life supporting a sense of community and service production. Improved energy efficiency reduces greenhouse gas emissions. Instead of renovating individual buildings, renovation of the entire area is recommended. Sustainability in construction translates into favouring recycling and renewable materials and building-specific energy systems using renewable and/or low-emission resources. It is recommended that renovations to improve energy efficiency are scheduled to coincide with other maintenance/ renovations so as to reduce costs. In renovation construction, the role of service improvement is more important than products. Improved services help to identify a solution that fulfils several customer needs, meets financial limitations and can be implemented efficiently. Companies are advised to view renovation construction as an innovative market segment entitled to its own service portfolio. Truths about new building should be discarded and new services developed based on recent study results and new technologies. (orig.)

  1. Prerequisites for Successful Strategic Partnerships for Sustainable Building Renovation

    DEFF Research Database (Denmark)

    Jensen, Per Anker; Johansen, Jakob Berg; Thuesen, Christian

    The purpose of this paper is to identify the prerequisites for establishing successful strategic partnerships in relation to renovating buildings sustainably. Establishing strategic partnerships is in the paper seen as a potential way to make building renovation more sustainable in Denmark...... and analysis of strategic partnerships models as well as typical processes used in building renovation. Experiences from development of new strategic partnerships have particularly been found in the UK and Sweden. Based on two workshops with practitioners representing the whole value chain in the construction...... industry and analyses of two exemplary cases the paper suggests prerequisites for establishing successful strategic partnerships for sustainable building renovation. The results show that strategic partnerships are collaborations set up between two or more organizations that remain independent...

  2. Drivers for retrofit: a sociocultural approach to houses and inhabitants

    DEFF Research Database (Denmark)

    Tjørring, Lise; Gausset, Quentin

    2018-01-01

    , retrofits were investigated from the perspective of the everyday life of homeowners. Three social dimensions that played an important role when the people in the study discussed house renovation were identified and discussed: houses as part of homeowners’ life cycles and personal events; houses......Private households constitute approximately 30% of the total energy consumption in Denmark. The greatest potential for reducing energy consumption in private households is through retrofits of existing houses. One of the most common ways to promote retrofits is the act of sending an energy advisor...... as frameworks for social relations; and houses as markers of social values and status. These results indicate a need to develop new strategies to promote retrofits more effectively, which focus less on the techno-economic aspects and more on the social dimensions....

  3. Housing of sows during farrowing: a review on pen design, welfare and productivity

    DEFF Research Database (Denmark)

    Pedersen, Lene Juul; Malmkvist, Jens; Andersen, Heidi Mai-Lis

    2013-01-01

    . Pens for loose housed sows are good alternatives for the sake of sow welfare. Reveiew of the existing literature does not suggest that loose housing is associated with higher general piglet mortality than housing in farrowing crates. Knowledge from studies on behavioural needs for sow and piglet during......Housing of sows during farrowing occurs mainly in farrowing crates where the sows are confined between bars without the possibility to turn around. The existing farrowing crates are associated with a number of negative welfare consequences for sows. Furthermore, breeding more piglets in the litter......, combined with the fact that sows have generally become both longer and wider over the past 15 years, means that the size of the current crates is not large enough neither to accommodate the sow nor the piglets until 4 weeks after birth. Therefore, alternatives to the current farrowing crate are necessary...

  4. Early stage decision support for sustainable building renovation – A review

    DEFF Research Database (Denmark)

    Nielsen, Anne Nørkjær; Jensen, Rasmus Lund; Larsen, Tine Steen

    2016-01-01

    Decision support tools for building renovation are important as assistance to professional building owners when setting goals for sustainability, and for making sure that the objectives are met throughout the design process, both when renovating a single building or choosing renovation actions wi...

  5. Supply chain partnership within housing renovation : Approaches and expectations in the Dutch housing association sector

    NARCIS (Netherlands)

    Gruis, V.H.; Roders, M.J.; Straub, A.

    2011-01-01

    Supply chain partnerships within housing refurbishment have not been given much specific attention which may be found surprising because the refurbishment market is becoming of increasing importance compared to new construction and has specific characteristics that require adapted approaches to

  6. Supply chain partnerships within housing renovation- approaches and expectations in the Dutch housing association sector

    NARCIS (Netherlands)

    Ad Straub; Martin Roders; Vincent Gruis

    2011-01-01

    Supply chain partnerships within housing refurbishment have not been given much specific attention which may be found surprising because the refurbishment market is becoming of increasing importance compared to new construction and has specific characteristics that require adapted approaches to

  7. Renovation of the Stockholm sewerage system

    International Nuclear Information System (INIS)

    Sandin, Paer

    1987-01-01

    Within a few years Stockholm will let all its treated wastewater into the Saltsjoen. The Saltsjoen is the inner part of the Stockholm Archipelago, which is one of the finest recreation areas in Sweden and where many Stockholmians spend a great deal of their leisure time. That is one reason why it is so important that all wastewater is treated before it reaches the recipient. A sewerage system in bad condition means that the risk of not allowed/unplanned overflows is increased. In order to prevent overflows we drafted 'Plan 83' which tells us how our sewerage system shall be constructed in the future and what measures has to be made in the system. Renovations of the existing pipes is one method to get a well functioning sewer system. Today we have made about 50 different objects at a total length of 6000 m. Why do we renovate sewers and why are we attempting to develop methods for pipe renovations?

  8. The Impact of Religious Culture on Organization of Houses

    Directory of Open Access Journals (Sweden)

    Gholam Hossein Memarian

    2010-06-01

    Full Text Available Culture is the principal element in forming houses and it also plays an important role in social sustainability. In this way, it will become so important to survey in vernacular culture in order to recognize behavioral patterns of divers religions and nations. Nevertheless, the impressive factors of culture in a human made environment such as the one in city of Kerman, which has diversity in cultures and residential districts belong to Muslims, Zoroastrians, and Jewish people, have been ignored partly. So, planners have been faced with problems in codifying and organizing guidelines for designing and renovation approaches in these districts. In this paper, the matter of privacy and hospitality in Islamic culture and impacts of that on the formation of houses will be discussed through the sacred text of Quran by using the combining research method, logical reasoning and ethnography. Furthermore, it refers to the Torah and Avesta and demonstrates that the first impressive layer on the architecture of Kerman houses initiates from Islamic culture, as a predominant one there, in some principals such as privacy, neighborhood rights, and hospitality. Moreover, it shows that the second impressive layer initiates from Zoroastrian and Jewish religious beliefs and traditions formed the architecture of their houses. Therefore, their trends for security, life, needs and regarding religious rites should be considered in the future guidelines in renovation of these residential districts. Meanwhile, further studies could search for approaches & methods of converting the theoretical results of this paper into the guidelines & design principles.

  9. Indoor Air Quality of Residential Building Before and After Renovation

    Science.gov (United States)

    Sánka, Imrich; Földváry, Veronika

    2017-06-01

    This study investigates the impact of energy renovation on the indoor air quality of an apartment building during the heating season. The study was performed in one residential building before and after its renovation. An evaluation of the indoor air quality was performed using objective measurements and a subjective survey. The concentration of CO2 was measured in the bedrooms, and a sampling of the total volatile compounds (TVOC) was performed in the living rooms of the selected apartments. Higher concentrations of CO2 and TVOC were observed in the residential building after its renovation. The concentrations of CO2, and TVOC in some of the cases exceeded the recommended maximum limits, especially after implementing energy-saving measures on the building. The average air exchange rate was visibly higher before the renovation of the building. The current study indicates that large-scale renovations may reduce the quality of an indoor environment in many apartments, especially in the winter season.

  10. Upgrade energy building standards and develop rating system for existing low-income housing

    International Nuclear Information System (INIS)

    Muller, D.; Norville, C.

    1993-07-01

    The city of Memphis Division of Housing and Community Development (HCD) receives grant funding each year from the U.S. Department of Housing and Urban Development (HUD) to provide local housing assistance to low-income residents. Through the years, HCD has found that many of the program recipients have had difficulty in managing their households, particularly in meeting monthly financial obligations. One of the major operating costs to low-income households is the utility bill. Furthermore, HCD's experience has revealed that many low-income residents are simply unaware of ways to reduce their utility bill. Most of the HCD funds are distributed to low-income persons as grants or no/low interest loans for the construction or rehabilitation of single-family dwellings. With these funds, HCD builds 80 to 100 new houses and renovates about 500 homes each year. Houses constructed or renovated by HCD must meet HUD's minimum energy efficiency standards. While these minimum standards are more than adequate to meet local building codes, they are not as aggressive as the energy efficiency standards being promoted by the national utility organizations and the home building industry. Memphis Light, Gas and Water (MLGW), a city-owned utility, has developed an award-winning program named Comfort Plus which promotes energy efficiency open-quote in new residential construction. Under Comfort Plus, MLGW models house plans on computer for a fee and recommends cost-effective alterations which improve the energy efficiency of the house. If the builder agrees to include these recommendations, MLGW will certify the house and guarantee a maximum annual heating/cooling bill for two years. While the Comfort Plus program has received recognition in the new construction market, it does not address the existing housing stock

  11. Upgrade energy building standards and develop rating system for existing low-income housing

    Energy Technology Data Exchange (ETDEWEB)

    Muller, D.; Norville, C. [Memphis and Shelby County Div. of Planning and Development, TN (United States)

    1993-07-01

    The city of Memphis Division of Housing and Community Development (HCD) receives grant funding each year from the U.S. Department of Housing and Urban Development (HUD) to provide local housing assistance to low-income residents. Through the years, HCD has found that many of the program recipients have had difficulty in managing their households, particularly in meeting monthly financial obligations. One of the major operating costs to low-income households is the utility bill. Furthermore, HCD`s experience has revealed that many low-income residents are simply unaware of ways to reduce their utility bill. Most of the HCD funds are distributed to low-income persons as grants or no/low interest loans for the construction or rehabilitation of single-family dwellings. With these funds, HCD builds 80 to 100 new houses and renovates about 500 homes each year. Houses constructed or renovated by HCD must meet HUD`s minimum energy efficiency standards. While these minimum standards are more than adequate to meet local building codes, they are not as aggressive as the energy efficiency standards being promoted by the national utility organizations and the home building industry. Memphis Light, Gas and Water (MLGW), a city-owned utility, has developed an award-winning program named Comfort Plus which promotes energy efficiency{open_quote} in new residential construction. Under Comfort Plus, MLGW models house plans on computer for a fee and recommends cost-effective alterations which improve the energy efficiency of the house. If the builder agrees to include these recommendations, MLGW will certify the house and guarantee a maximum annual heating/cooling bill for two years. While the Comfort Plus program has received recognition in the new construction market, it does not address the existing housing stock.

  12. The Strategic-Renovation Banks’ Risks Management

    Directory of Open Access Journals (Sweden)

    Yeremeychuk Raisa A.

    2017-04-01

    Full Text Available The article is aimed at developing approaches to implementation of the strategic-renovation risk management. Essence of risk theories was researched, the concept of «risk» in the bank’s management system were analyzed. On the basis of a theoretical generalization of scientific literature and the carried out analysis of existing risk management strategies to ensure the security of banking business, the strategy of renovation management has been selected. Because bank risks are part of the economic risk system, they are complex in their nature. However, given the importance of bank risks, the interpretation of their essence is still a debating matter. In a certain number of cases, their essence is replaced by the cause of occurrence, that is, all the different circumstances, factors that lead to the losses. So today, banks are considering risks, in particular, not only as a source of possible losses, but also as an opportunity to generate additional profits. An algorithm for taking a strategic-renovation decision on the banks’ risks management system has been proposed.

  13. 29 CFR 1919.31 - Proof tests-loose gear.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 7 2010-07-01 2010-07-01 false Proof tests-loose gear. 1919.31 Section 1919.31 Labor... (CONTINUED) GEAR CERTIFICATION Certification of Vessels: Tests and Proof Loads; Heat Treatment; Competent Persons § 1919.31 Proof tests—loose gear. (a) Chains, rings, shackles and other loose gear (whether...

  14. Renovate Right: Prevent Lead Poisoning in Children

    Centers for Disease Control (CDC) Podcasts

    2008-10-02

    In this podcast, Dr. Maria Doa, Director of the Environmental Protection Agency's (EPA) National Program Chemicals Division, discusses EPA's new rule for renovations, repairs, and painting activities. The new rule includes information on lead-safe work practices when conducting renovations, repairs, and painting in pre-1978 homes and schools to prevent the spread of lead dust.  Created: 10/2/2008 by National Center for Environmental Health (NCEH).   Date Released: 10/2/2008.

  15. Holistic Energy Renovation of Pre- and Postwar Apartment Blocks in Denmark

    DEFF Research Database (Denmark)

    Eriksen, Marlene Stenberg Hagen; Rode, Carsten; Bjarløv, Søren Peter

    of today. This paper presents the Danish research project Holistic Energy Renovation, which aims at performing a holistic energy renovation of two case buildings. As part of the project nine parameters for a holistic renovation have been defined, a method for developing and assessing a holistic building...... of the assessment method and an evaluation of how the holistic perspective has influenced the project process and product development....

  16. Investigation on Moisture and Indoor Environment in Eight Danish Houses

    DEFF Research Database (Denmark)

    Jensen, Kasper Risgaard; Jensen, Rasmus Lund; Nørgaard, Jesper

    2011-01-01

    then need to be ventilated actively either by natural or mechanical ventilation. Increased focus on energy reduction together with requirements for e.g. thermal comfort indoors may lead to reduced indoor air quality and moisture problems which in turn may cause mould problems. This paper describes...... an investigation of the indoor air quality, relative humidity and air change rate in eight Danish houses. The houses were selected as they are all having recurrent problems with condensation on the windows. The houses were built between 1930 and 2007. Some of them have been only slightly renovated where others......, to indoor air quality in terms of CO2 concentration, and to the use of the house in terms of the level of the relative humidity and indoor moisture excess. Furthermore, the moisture production in the houses was estimated and compared to values provided in the literature. A better indoor air quality...

  17. Renovation versus New Construction and Building Decision Tool for Educational Facilities

    OpenAIRE

    Pope, Carrie; Marks, Eric; Back, Edward; Leopard, Tim; Love, Thomas

    2016-01-01

    Renovation of an existing building is an accomplished stem of the construction industry because it supplies financial diversification for construction stakeholders. Although several construction planning tools and stakeholder alignment exercises have been developed, no tool exists to assist project owners to decide between renovating an existing building and new construction with a comprehensive decision criteria. The objective of this research is to create and test a renovation versus new bu...

  18. Automated roof window control system to address overheating on renovated houses

    DEFF Research Database (Denmark)

    Psomas, Theofanis Ch.; Heiselberg, Per Kvols; Lyme, Thøger

    2017-01-01

    Highlights •Manually controlled passive cooling system do not assure high quality environment. •Automated window system reduces overheating risk in houses of temperate climates. •Window system offers similar indoor air quality with mechanical ventilation system. •User behavior on window system...

  19. Monitored results from the Yellow House

    International Nuclear Information System (INIS)

    Joergensen, O.B.; Nielsen, L.T.

    2000-01-01

    This paper describes the results of the monitoring program for The Yellow House, which consists of a four-storey high building with eight apartments. The monitoring started after the completion of the renovation in December 1996 and will continue until July 2000. Not all components have been measured during the whole period. The monitoring contains data for each apartment for space heating, electricity, cold water, hot water and gas. Also long-term measurements of the relative air humidity and room temperatures in two apartments have been made together with short-term measurements of daylight levels. For The Yellow House data has been registered for the PV-panels and solar collectors and also the climatic data have been measured. A questionnaire has been evaluated and a user survey will be carried out during summer 2000. (au)

  20. Decision support tool for sustainable renovation projects in Dutch housing corporations

    NARCIS (Netherlands)

    Garufi, D.

    2015-01-01

    In Europe, the Energy Performance of Buildings Directive is a driving force for member states to develop and strengthen energy performance regulations for new and existing buildings. In the Netherlands, 33% of dwellings (2.4 million) are owned by social housing associations (Aedes, 2013), and 86%

  1. Advanced loose parts detection system for nuclear power plants

    International Nuclear Information System (INIS)

    Por, G.; Szappanos, G.

    2000-01-01

    The importance of loose part detection is discussed. The consequences of a relatively big (7.7 kg) loose part found in a WWER-440 NPP are discussed. A portable loose part monitoring system is presented, which is based on sequential probability ratio test. (author)

  2. 77 FR 74472 - Application to Export Electric Energy; Energia Renovable S.C., LLC

    Science.gov (United States)

    2012-12-14

    ... DEPARTMENT OF ENERGY [OE Docket No. EA-387] Application to Export Electric Energy; Energia... application. SUMMARY: Energia Renovable S.C., LLC (Energia Renovable) has applied for authority to transmit...)). On September 11, 2012, DOE received an application from Energia Renovable for authority to transmit...

  3. 40 CFR 745.326 - Renovation: State and Tribal program requirements.

    Science.gov (United States)

    2010-07-01

    ... sampling technician training programs. (ii) Procedures and requirements for the certification of renovators and dust sampling technicians. (iii) Procedures and requirements for the certification of individuals..., 2010. For the convenience of the user, the added text is set forth as follows: § 745.326 Renovation...

  4. Efficient Solutions for Existing Homes Case Study: Demonstration House of Cold-Climate Solutions for Affordable Housing

    Energy Technology Data Exchange (ETDEWEB)

    T. Schirber, C. Ojczyk, and R. Jacobson

    2016-05-01

    Single family homes in urban areas that are available for renovation by nonprofit developers are often in rough shape (1MM to 2MM nationally). Budgeting has historically focused on improving homes to meet basic housing standards. A rising interest in the long-term impact of homeownership has introduced the need to balance basic needs with home performance. This demonstration project aims to help nonprofit affordable housing developers become familiar with three Building America performance measures, the installation processes, and impacts and benefits of each. A story and a half home in North Minneapolis, MN was presented by Urban Homeworks our local nonprofit partner. The team helped them install three researched upgrade measures: exterior roof insulation or 'overcoat,' exterior foundation insulation, or 'excavationless', and a combined space and water heating HVAC system or 'combi.'

  5. Meniscal root entrapment of an osteochondritis dissecans loose body.

    Science.gov (United States)

    Jones, Christopher R; McMonagle, Joseph S; Garrett, William E

    2014-09-01

    Loose bodies are relatively common in the knee. On radiographs they can often be seen in the medial and lateral gutters, intercondylar notch, and the posterior compartment. At times an apparent loose body is not free to move in the knee because it has been covered by synovium and is no longer mobile. It is uncommon for an osteochondral loose body to become incorporated into meniscal tissue. We report a case of an apparent loose body becoming incorporated into the posterior horn and root of the medial meniscus. We are not aware that this condition has been previously reported. Because removing the entire loose body would have destabilized the posterior root of the medial meniscus, it is important to be aware of this potential occurrence.

  6. Mobilization for energy renovation. Innovative tools for the uptake of deep renovation of the existing building stock based on behavioural insights

    OpenAIRE

    Taranu, Victoria; Verbeeck, Griet

    2015-01-01

    Mobilization for energy renovation. Innovative tools for the uptake of deep renovation of the existing building stock based on behavioural insights. In the context of climate change it is a priority to reduce the energy demand and make a shift towards renewable sources of energy. In Flanders almost half of the existing residential building stock was built before 1970 with low levels of insulation and inefficient installations. The vast majority of Fle...

  7. 40 CFR 745.92 - Fees for the accreditation of renovation and dust sampling technician training and the...

    Science.gov (United States)

    2010-07-01

    ... renovation and dust sampling technician training and the certification of renovation firms. 745.92 Section... Renovation § 745.92 Fees for the accreditation of renovation and dust sampling technician training and the... the following disciplines: Renovator, dust sampling technician. (ii) Exemption. No fee shall be...

  8. Effects of loose housing and the provision of alternative nesting material on peri-partum sow behaviour and piglet survival

    NARCIS (Netherlands)

    Bolhuis, J.E.; Raats-van den Boogaard, A.M.E.; Hoofs, A.I.J.; Soede, N.M.

    2018-01-01

    Sows are strongly motivated to perform nestbuilding behaviour before parturition. This behaviour is often restricted in commercial systems due to confinement of the sow and lack of suitable nesting material to be used on slatted floors. This study aimed to investigate effects of loose vs. crated

  9. Cost-optimal energy performance renovation measures of educational buildings in cold climate

    International Nuclear Information System (INIS)

    Niemelä, Tuomo; Kosonen, Risto; Jokisalo, Juha

    2016-01-01

    Highlights: • The proposed national nZEB target can be cost-effectively achieved in renovations. • Energy saving potential of HVAC systems is significant compared to the building envelope. • Modern renewable energy production technologies are cost-efficient and recommendable. • Improving the indoor climate conditions in deep renovations is recommendable. • Simulation-based optimization method is efficient in building performance analyzes. - Abstract: The paper discusses cost-efficient energy performance renovation measures for typical educational buildings built in the 1960s and 1970s in cold climate regions. The study analyzes the impact of different energy renovation measures on the energy efficiency and economic viability in a Finnish case study educational building located in Lappeenranta University of Technology (LUT) campus area. The main objective of the study was to determine the cost-optimal energy performance renovation measures to meet the proposed national nearly zero-energy building (nZEB) requirements, which are defined according to the primary energy consumption of buildings. The main research method of the study was simulation-based optimization (SBO) analysis, which was used to determine the cost-optimal renovation solutions. The results of the study indicate that the minimum national energy performance requirement of new educational buildings (E_p_r_i_m_a_r_y ⩽ 170 kWh/(m"2,a)) can be cost-effectively achieved in deep renovations of educational buildings. In addition, the proposed national nZEB-targets are also well achievable, while improving the indoor climate (thermal comfort and indoor air quality) conditions significantly at the same time. Cost-effective solutions included renovation of the original ventilation system, a ground source heat pump system with relatively small dimensioning power output, new energy efficient windows and a relatively large area of PV-panels for solar-based electricity production. The results and

  10. 40 CFR 745.90 - Renovator certification and dust sampling technician certification.

    Science.gov (United States)

    2010-07-01

    ... sampling technician certification. 745.90 Section 745.90 Protection of Environment ENVIRONMENTAL PROTECTION... technician certification. (a) Renovator certification and dust sampling technician certification. (1) To become a certified renovator or certified dust sampling technician, an individual must successfully...

  11. Renovating animal facilities to withstand disasters.

    Science.gov (United States)

    Cartwright, Jim; Contratto, Jim; Gould, Nathan; Freeman, William

    2013-10-01

    In the aftermath of Superstorm Sandy, new attention has been drawn to planning for and mitigating the effects of disasters on laboratory animal facilities. A number of design approaches and solutions can be easily incorporated into a new vivarium, enhancing its ability to withstand and recover from a disaster. Renovating a vivarium poses special challenges, however. Existing conditions in the project area may dictate which approaches or solutions are feasible, and retrofitting is often more complex and expensive than incorporating the same features into new construction. The authors explain how project design teams can evaluate the types of disasters that a renovated facility will need to address and develop a design strategy that responds to these disasters in the most effective way.

  12. Prerequisites for Successful Strategic Partnerships for Sustainable Building Renovation

    DEFF Research Database (Denmark)

    Jensen, Per Anker; Johansen, Jakob Berg; Thuesen, Christian

    2017-01-01

    The purpose of this paper is to identify the prerequisites for establishing successful strategic partnerships in relation to renovating buildings sustainably. Establishing strategic partnerships is in the paper seen as a potential way to make building renovation more sustainable in Denmark...... industry and analyses of two exemplary cases the paper suggests prerequisites for establishing successful strategic partnerships for sustainable building renovation. The results show that strategic partnerships are collaborations set up between two or more organizations that remain independent...... particularly in terms of reducing energy consumption and use of resources and increase productivity. However, until now we have only had a limited number of such partnerships implemented and the few examples that do exist, mostly concern the construction of new buildings. The paper is based on an investigation...

  13. Decision-making in the Pre-design Stage of Sustainable Building Renovation Projects

    DEFF Research Database (Denmark)

    Gade, Anne Nørkjær; Jensen, Rasmus Lund; Larsen, Tine Steen

    2017-01-01

    There is a great potential in renovating our existing building stock, in terms of improving environmental, economic and social qualities. Meeting the increasing performance requirements for sustainable construction entails an increasing level of complexity in the design process of both new...... buildings and renovation projects. Decision support tools are one solution that can help the building owner manage this complexity. This study investigates the current decision-making processes among Danish professional building owners, in order to propose a conceptual framework for future decision support...... tools for sustainable renovation. Design Science Research Methodology has been used as the main methodological framework. Current practices for setting goals for sustainability, determining the current state of the buildings and prioritizing which buildings to renovate within a building portfolio, have...

  14. Energi- og miljøvurdering ved renovering

    DEFF Research Database (Denmark)

    Holleris Petersen, E.

    En afprøvning af pc-værktøjet BEAT 2000's viser, at BEAT 2000 er et velegnet værktøj, der umiddelbart kan anvendes til energi- og miljøvurdering af renoveringssager. BEAT 2000 er afprøvet dels på renovering med energibesparende foranstaltninger i form af solfangere, solvægge og ventilationsanlæg...... med varmegenvinding, dels på mere traditionel renovering af små, utidssvarende lejligheder. En udbygning af datagrundlaget, især for alternative energibesparende løsninger og de materialer, der indgår, vil kunne reducere tidsforbruget ved definition af de utraditionelle og usædvanlige bygningsdele...

  15. Passive houses in Sweden. Experiences from design and construction phase

    Energy Technology Data Exchange (ETDEWEB)

    Jansson, Ulla

    2008-07-01

    The sector of residential buildings and service organizations uses 36% of the total energy in Sweden. In June 2006, it was decided by the Swedish parliament that the energy use in residential buildings and premises should decrease by 20% per heated unit area before 2020. To reach this goal, more energy efficient buildings must be produced as well as energy efficient improvements must be performed on the existing building stock. One way to reduce the energy use in buildings is to build passive houses. A passive house is a mechanically ventilated building that with a highly insulated and air tight building envelope uses a minimum of energy for heating. The method used in this research is to practically participate in four passive house demonstration projects. The results expected are to find guiding principles and tools needed for passive house planning and make the system solutions usable for planning in more general terms. Joining as a part of the planning group; advice and help is given to architects, consultants and to the client. The demonstration projects studied are located in the south-west of Sweden. Three of the projects are new constructions and one is a renovation project. In the centre of Vanirom 40 rental apartments were built in 2005/2006 according to the passive house standard. Solar collectors on the roof contribute to the domestic hot water production. Every apartment has its own mechanical ventilation system with efficient heat recovery. Auxiliary heating is supplied by electricity. The load bearing structure were made of concrete and cast at site. The exterior walls and roof were made of wooden frame construction and mounted at site. The tenants moved in during summer 2006. The passive house project in Failure's consists of three houses with 12 rental apartments. The air is supplied by mechanical ventilation with an air to air heat exchanger, one in each apartment. The domestic hot water is prepared by solar collectors and auxiliary heating

  16. Loose parts monitoring system

    International Nuclear Information System (INIS)

    Wakasa, Kohji; Nishida, Eiichi; Ishii, Kazuo; Yamanaka, Hiroto.

    1987-01-01

    In the loose parts monitoring system (LPMS), installed for integrity monitoring of the nuclear power plants; when there occur foreign metallic objects in the reactor primary system, including a steam generator and the piping, the sounds caused by them moving with the cooling water and thereby getting in contact with various structures are detected. Its purpose is, therefore, to detect any abnormality in the reactor plant system through such abnormal sounds due to loose or fallen supports etc., and so provide this information to the reactor operators. In principle, accelerometers are distributed in such as reactor vessel, steam generator, coolant pumps, etc., so that various sounds are collected and converted into electrical signals, followed by analysis of the data. Described are the LPMS configuration/functions, the course taken in LPMS development, future problems, etc. (Mori, K.)

  17. Generation of components for software renovation factories from context-free grammars

    NARCIS (Netherlands)

    Brand, van den M.G.J.; Sellink, M.P.A.; Verhoef, C.

    2000-01-01

    We present an approach for the generation of components for a software renovation factory. These components are generated from a contex-free grammar definition that recognizes the code that has to be renovated. We generate analysis and transformation components that can be instantiated with a

  18. Arthroscopic treatment of bony loose bodies in the subacromial space

    Directory of Open Access Journals (Sweden)

    Wei Li

    2015-01-01

    Conclusion: The mechanism of formation of bony loose bodies is not clear, may be associated with synovial cartilage metaplasia. Arthroscopic removal of loose bodies and bursa debridement is a good option for treatment of the loose body in the subacromial space, which can receive good function.

  19. Differences between tight and loose cultures : A 33-nation study

    NARCIS (Netherlands)

    Gelfand, M.J.; Raver, R.L.; Nishii, L.; Leslie, L.M.; Lun, J.; Lim, B.C.; Van de Vliert, E.

    2011-01-01

    With data from 33 nations, we illustrate the differences between cultures that are tight (have many strong norms and a low tolerance of deviant behavior) versus loose (have weak social norms and a high tolerance of deviant behavior). Tightness-looseness is part of a complex, loosely integrated

  20. The Story of Closely and Loosely Coupled Organisations.

    Science.gov (United States)

    Plowman, Travis S.

    1998-01-01

    Examines five types of collegiate organizations (collegial, bureaucratic, political, anarchical, cybernetic) in terms of their interactiveness within closely and loosely coupled organizations. The terminology of closely and loosely coupled organizations is examined and existing definitions are refined. Examples are drawn from contemporary…

  1. A hybrid decision support system for sustainable office building renovation and energy performance improvement

    Energy Technology Data Exchange (ETDEWEB)

    Juan, Yi-Kai [Department of Architecture, National Taiwan University of Science and Technology (NTUST) (China); Center for Sustainable Development and Global Competitiveness, Stanford University (United States); Gao, Peng [Department of Traffic and Transportation Engineering, Tongji University (China); Wang, Jie [Center for Sustainable Development and Global Competitiveness, Stanford University (United States)

    2010-03-15

    Energy consumption of buildings accounts for around 20-40% of all energy consumed in advanced countries. Over the last decade, more and more global organizations are investing significant resources to create sustainably built environments, emphasizing sustainable building renovation processes to reduce energy consumption and carbon dioxide emissions. This study develops an integrated decision support system to assess existing office building conditions and to recommend an optimal set of sustainable renovation actions, considering trade-offs between renovation cost, improved building quality, and environmental impacts. A hybrid approach that combines A* graph search algorithm with genetic algorithms (GA) is used to analyze all possible renovation actions and their trade-offs to develop the optimal solution. A two-stage system validation is performed to demonstrate the practical application of the hybrid approach: zero-one goal programming (ZOGP) and genetic algorithms are adopted to validate the effectiveness of the algorithm. A real-world renovation project is introduced to validate differences in energy performance projected for the renovation solution suggested by the system. The results reveal that the proposed hybrid system is more computationally effective than either ZOGP or GA alone. The system's suggested renovation actions would provide substantial energy performance improvements to the real project if implemented. (author)

  2. Factors Associated with Prosthetic Looseness in Lower Limb Amputees.

    Science.gov (United States)

    Phonghanyudh, Thong; Sutpasanon, Taweesak; Hathaiareerug, Chanasak; Devakula, M L Buddhibongsa; Kumnerddee, Wipoo

    2015-12-01

    To determine the factors associated with prosthetic looseness in lower limb amputees in Sisaket province. The present was a cross-sectional descriptive study. Subjects were lower limb amputees who previously obtained prostheses and required prosthetic replacements at the mobile prosthetic laboratory unit under the Prostheses Foundation of H.R.H. the Princess Mother at Khun Han Hospital, Sisaket province, in February 2013. Data including participant characteristics, prosthetic looseness data, and various variables were collected by direct semi-structured interview. Energy expenditures in physical activities were measured using the Thai version of the short format international physical activity questionnaire. Data between participants with and without prosthetic looseness were compared to determine prosthetic loosening associated factors. Among 101 participants enrolled, 33 (32.7%) had prosthetic looseness with average onset of 1.76 ± 1.67 years. Diabetes mellitus was the only significant factor associated with prosthetic looseness from both univariate and multivariate analyses (HR = 7.05, p = 0.002 and HR = 5.93, p = 0.007 respectively). Among the lower limb amputees in Sisaket province, diabetes mellitus was the only factor associated with prosthetic looseness. Therefore, diabetic screening should be supplemented in lower limb amputee assessment protocol. In addition, we recommend that amputees with diabetes mellitus should receive prosthesis check out at approximately

  3. Funding of Facility Repairs and Renovation.

    Science.gov (United States)

    Kaiser, Harvey H.

    1984-01-01

    Compares the life cycle approach for campus building repair and renovation to the University of California's comprehensive building maintenance formula and advises that formulas be used cautiously as a method of determining appropriate budget levels. (MLF)

  4. The Renovation and Future Capabilities of the Thacher Observatory

    Science.gov (United States)

    O'Neill, Katie; Osuna, Natalie; Edwards, Nick; Klink, Douglas; Swift, Jonathan; Vyhnal, Chris; Meyer, Kurt

    2016-01-01

    The Thacher School is in the process of renovating the campus observatory with a new meter class telescope and full automation capabilities for the purpose of scientific research and education. New equipment on site has provided a preliminary site characterization including seeing and V-band sky brightness measurements. These data, along with commissioning data from the MINERVA project (which uses comparable hardware) are used to estimate the capabilities of the observatory once renovation is complete. Our V-band limiting magnitude is expected to be better than 21.3 for a one minute integration time, and we estimate that milli-magnitude precision photometry will be possible for a V=14.5 point source over approximately 5 min timescales. The quick response, autonomous operation, and multi-band photometric capabilities of the renovated observatory will make it a powerful follow-up science facility for exoplanets, eclipsing binaries, near-Earth objects, stellar variability, and supernovae.

  5. Sustainability Evaluation of Retrofitting and Renovation of Buildings in Early Stages

    DEFF Research Database (Denmark)

    Jensen, Per Anker; Maslesa, Esmir; Gohardani, Navid

    2013-01-01

    research results and ideas for the development of a tool, which can be used as decision support for renovation projects in early stages. The research is part of the Eracobuild project ACES – “A concept for promotion of sustainable retrofitting and renovation in early stages” with participants from Denmark...

  6. Historic Schools: Renovation vs. Replacement & the Role of a Feasibility Study.

    Science.gov (United States)

    National Trust for Historic Preservation, Washington, DC.

    Weighing the pros and cons of renovating a historic neighborhood school or building a new one takes preservation "know-how," experience, and creativity. The potential for renovation is routinely dismissed without full consideration of the facts and long-term implications. Central to this decision-making process is the feasibility study,…

  7. Sustainable Renovation of Residential Buildings and the Landlord/Tenant Dilemma

    DEFF Research Database (Denmark)

    Ástmarsson, Björn; Jensen, Per Anker; Maslesa, Esmir

    2013-01-01

    solutions can help solve the landlord/tenant dilemma in relation to sustainable renovation of residential buildings, and how the general awareness of sustainable renovation can be increased. Particular focus is on whether tools like energy performance contracting and energy labeling can help solve......The landlord/tenant dilemma arises when the interests of landlords and tenants misalign and is one of the greatest barriers hindering the development of sustainable renovation of residential buildings in Europe. The aim of this research is to investigate how regulatory changes and contractual...... be overcome with a package solution. In the Danish national context the package solution must consist of legislative changes, financial incentives and better dissemination of information. Therefore, an array of different tools must be integrated and used in cooperation to overcome the dilemma....

  8. Giant peritoneal loose bodies

    African Journals Online (AJOL)

    2015-03-27

    Mar 27, 2015 ... not be familiar with the entity, can potentially be confused with malignant or parasitic lesions. Familiarity with their characteristic computed tomographic ... preventing unnecessary surgical intervention in an asymptomatic patient.3,4 It is important to differentiate giant peritoneal loose bodies from lesions such ...

  9. Alternative Comfort System for Retrofit in Renovated Social Housing in The Netherlands

    NARCIS (Netherlands)

    Boxem, G.; Erk, van N.; Ree, van L.F.; Tuip, B.G.C.C.; Scartezzini, J-L

    2009-01-01

    In order to achieve a reduction of the energy consumption in the build environment (30% in 2020) it is a necessity to reduce the consumption of the existing building stock. For social housing (30 %) this has to be done under the condition that the total cost of living (rental+ energy costs) for the

  10. Cow behaviour and managerial aspects of fully automatic milking in loose housing systems

    NARCIS (Netherlands)

    Ketelaar-de Lauwere, C.C.

    1999-01-01

    In this study of cow behaviour and managerial aspects of fully automatic milking, the emphasis was on implementing automatic milking systems (AMS) in cubicle houses in a way that suits cows and farmer. The starting points of the research were that the cows would visit the AMS voluntarily

  11. Renovation of the sealing planes of WWER-400 reactors pressure vessel

    International Nuclear Information System (INIS)

    Jablonicky, P.; Pilat, P.

    2007-01-01

    An article describes technical solution for renovation of the sealing planes of WWER-440 reactor's pressure vessel. Four nickel sealing rings placed in four concentric grooves are providing hermetic sealing between the vessel and the lid of this type of the reactor. Impeccable seal of the reactor's pressure vessel, where the fission reaction takes place, represents a basic security factor for safe electric energy production. Principle of renovation of the reactor's pressure vessel and lid sealing planes is based on mechanical enlargement of defective grooves and following cladding of the new material by TIG welding. Final step for renovation includes machining of new grooves according to geometrical and surface quality requirements (Authors)

  12. Fabulous Facilities: New Constructions and Renovations.

    Science.gov (United States)

    American Libraries, 1997

    1997-01-01

    Renovation and construction projects in 18 public and academic libraries across the United States are showcased, with 23 photographs illustrating library interiors and exteriors. Discussion centers on architecture, costs, technology infrastructure and equipment, preservation of old facilities, furniture, and library functions. (AEF)

  13. Creep of granulated loose-fill insulation

    DEFF Research Database (Denmark)

    Rasmussen, Torben Valdbjørn

    This report presents a proposal for a standardised method for creep tests and the necessary theoretical framework that can be used to describe creep of a granulated loose-fill material. Furthermore results from a round robin test are shown. The round robin test was carried out in collaboration...... with SP-Building Physics in Sweden and VTT Building Technology in Finland. For the round robin test a cellulosic fibre insulation material was used. The proposed standardised method for creep tests and theories are limited to cases when the granulated loose-fill material is exposed to a constant...

  14. Sound classification schemes in Europe - Quality classes intended for renovated housing

    DEFF Research Database (Denmark)

    Rasmussen, Birgit

    2010-01-01

    exposure in the home included in the proposed main objectives for a housing policy. In most countries in Europe, building regulations specify minimum requirements concerning acoustical conditions for new dwellings. In addition, several countries have introduced sound classification schemes with classes...... intended to reflect different levels of acoustical comfort. Consequently, acoustic requirements for a dwelling can be specified as the legal minimum requirements or as a specific class in a classification scheme. Most schemes have both higher classes than corresponding to the regulatory requirements...

  15. An assessment of schoolyard renovation strategies to encourage children's physical activity

    Directory of Open Access Journals (Sweden)

    Greenwood Emily

    2011-04-01

    Full Text Available Abstract Background Children in poor and minority neighborhoods often lack adequate environmental support for healthy physical development and community interventions designed to improve physical activity resources serve as an important approach to addressing obesity. In Denver, the Learning Landscapes (LL program has constructed over 98 culturally-tailored schoolyard play spaces at elementary schools with the goal to encourage utilization of play spaces and physical activity. In spite of enthusiasm about such projects to improve urban environments, little work has evaluated their impact or success in achieving their stated objectives. This study evaluates the impacts of LL construction and recency of renovation on schoolyard utilization and the physical activity rates of children, both during and outside of school, using an observational study design. Methods This study employs a quantitative method for evaluating levels of physical activity of individuals and associated environmental characteristics in play and leisure environments. Schools were selected on the basis of their participation in the LL program, the recency of schoolyard renovation, the size of the school, and the social and demographic characteristics of the school population. Activity in the schoolyards was measured using the System for Observing Play and Leisure Activity (SOPLAY, a validated quantitative method for evaluating levels of physical activity of individuals in play and leisure environments. Trained observers collected measurements before school, during school recess, after school, and on weekends. Overall utilization (the total number of children observed on the grounds and the rate of activity (the percentage of children observed who were physically active were analyzed. Observations were compared using t-tests and the data were stratified by gender for further analysis. In order to assess the impacts of LL renovation, recently-constructed LL schoolyards were

  16. Investigation of Indoor Air Quality in Houses of Macedonia

    Directory of Open Access Journals (Sweden)

    Silvia Vilčeková

    2017-01-01

    Full Text Available People who live in buildings are exposed to harmful effects of indoor air pollution for many years. Therefore, our research is aimed to investigate the indoor air quality in family houses. The measurements of indoor air temperature, relative humidity, total volatile organic compounds (TVOC, particulate matters (PM and sound pressure level were carried out in 25 houses in several cities of the Republic of Macedonia. Mean values of indoor air temperature and relative humidity ranged from 18.9 °C to 25.6 °C and from 34.1% to 68.0%, respectively. With regard to TVOC, it can be stated that excessive occurrence was recorded. Mean values ranged from 50 μg/m3 to 2610 μg/m3. Recommended value (200 μg/m3 for human exposure to TVOC was exceeded in 32% of houses. Mean concentrations of PM2.5 (particular matter with diameter less than 2.5 μm and PM10 (diameter less than 10 μm are determined to be from 16.80 μg/m3 to 30.70 μg/m3 and from 38.30 μg/m3 to 74.60 μg/m3 individually. Mean values of sound pressure level ranged from 29.8 dB(A to 50.6 dB(A. Dependence between characteristics of buildings (Year of construction, Year of renovation, Smoke and Heating system and data from measurements (Temperature, Relative humidity, TVOC, PM2.5 and PM10 were analyzed using R software. Van der Waerden test shows dependence of Smoke on TVOC and PM2.5. Permutational multivariate analysis of variance shows the effect of interaction of Renovation and Smoke.

  17. Software support for irregular and loosely synchronous problems

    Science.gov (United States)

    Choudhary, A.; Fox, G.; Hiranandani, S.; Kennedy, K.; Koelbel, C.; Ranka, S.; Saltz, J.

    1992-01-01

    A large class of scientific and engineering applications may be classified as irregular and loosely synchronous from the perspective of parallel processing. We present a partial classification of such problems. This classification has motivated us to enhance FORTRAN D to provide language support for irregular, loosely synchronous problems. We present techniques for parallelization of such problems in the context of FORTRAN D.

  18. Infrared thermography of loose hangingwalls

    CSIR Research Space (South Africa)

    Kononov, VA

    2002-09-01

    Full Text Available This project is the continuation of GAP706 “Pre-feasibility investigation of infrared thermography for the identification of loose hangingwall and impending falls of ground”. The main concept behind the infrared thermography method...

  19. The renovation of the Main Building is approaching completion

    CERN Multimedia

    Anaïs Schaeffer

    2011-01-01

    The renovation work under way in the CERN Main Building should be completed by June. From the floors to the ceilings, everything has been done to give this historic building a new lease of life.     Taken in the early 60s, this picture illustrates how light maintenance was a challenge for the auditorium in CERN’s main building.   Nobody who has recently had to shimmy between the cables, ladders and toolboxes deposited around the main hall of Building 500 to get to the post office, the bank or Restaurant 1 can be oblivious to the fact that the ground floor of the Main Building has been getting a face-lift. The renovation work, which started with the first-floor concourse in June 2010, should be finished over the next couple of months. The first-floor renovations, now almost complete, set the tone for the rest of the project. The floor and ceiling, both fitted with special acoustic materials for efficient noise damping, have been completely refurbished and the Building ...

  20. Restaurant No. 1 fully renovated

    CERN Document Server

    2007-01-01

    The Restaurant No. 1 team. After several months of patience and goodwill on the part of our clients, we are delighted to announce that the major renovation work which began in September 2006 has now been completed. From 21 May 2007 we look forward to welcoming you to a completely renovated restaurant area designed with you in mind. The restaurant team wishes to thank all its clients for their patience and loyalty. Particular attention has been paid in the new design to creating a spacious serving area and providing a wider choice of dishes. The new restaurant area has been designed as an open-plan space to enable you to view all the dishes before making your selection and to move around freely from one food access point to another. It comprises user-friendly areas that fully comply with hygiene standards. From now on you will be able to pick and choose to your heart's content. We invite you to try out wok cooking or some other speciality. Or select a pizza or a plate of pasta with a choice of two sauces fr...

  1. Building renovations in BIM systems

    Directory of Open Access Journals (Sweden)

    Smutný Marian

    2018-01-01

    Full Text Available Renovation of buildings is a demanding challenge for computer systems. Nowadays, complex 3D models of historic buildings can be scanned and modelled, including sculptural filigrees and stucco decorations with possibility to generate different projections, cross-sections and elevations according to descriptive geometry rules. However, all of this falls within the field of “3D Modelling”. BIM systems work with elements that have to be classified according to their purpose, or according to the way they are realized. The system is then able to sort, filter or group them. Also, it is able to compute their bill of quantity and quality based on their attributes. Last but not least, it has to be able to schematically display civil engineering drawings on the basis of classification of the elements which differ considerably from the display of descriptive geometry. In regular constructions, repeatability and predictability of the links between the elements suit computer systems. Thus, the issue of building renovations in BIM systems is to find a balance between modelling irregular constructions and irregular space arrangements, while maintaining the ability to interact with other BIM elements.

  2. Effect of Hot Climatic Conditions With Different Types of Housing on Productive Efficiency and Physiological Changes in Buffalo Calves

    International Nuclear Information System (INIS)

    Habeeb, A.A.M.; Gad, A.E.; El-Tarabany, A.A.

    2012-01-01

    The present study was planned to investigate the effect of housing types under both mild and hot periods of the year on twenty four buffalo calves aged 8-10 months with average body weight 156.8 kg. The study included two periods each was of 3 months. The first period was carried out during mild conditions while the second period was carried out during hot conditions. Averages of air temperature and relative humidity values at midday inside the farm building were 20.8 ± 1.0 degree C and 72.07 ± 2.1% under mild conditions and 35.93± 1.4 degree C and 58.23 ± 1.5 under the hot period, respectively. The estimated temperature-humidity index of values 20.23 and 33.17 during mild and hot conditions, respectively, indicated absence of heat stress during the first period and exposing the animals to very severe heat stress during the second period. The animals during the two experimental periods were fed the concentrate feed mixture according to body weight and daily gain with rice straw offered ad libitum. In each of the two studied periods, the animals were divided into two equal groups according to type of housing system. The animals in the first group (6 calves) were tied from their neck in stall barn in two rows tail to tail while the animals in the second group (6 calves) were left loose housing in the barn. The results showed that heat stress conditions of summer period induced significant decreases in daily body weight gain, total proteins, albumin, globulin, glucose, total lipids, total cholesterol, triglycerides, creatinine, sodium, potassium, calcium, inorganic phosphorus and GGT as well as T4 , T3 , parathormone hormonal levels. On the other hand, significant increase in respiration rate, temperatures of rectal and skin, urea, cortisol, GOT and GPT. Concerning the effect of housing type, there were significant differences in daily body gain of buffalo calves between free and tied through the first two months of experiment, so, daily body gain of buffalo

  3. Theoretical overview of heating power and necessary heating supply temperatures in typical Danish single-family houses from the 1900s

    DEFF Research Database (Denmark)

    Østergaard, Dorte Skaarup; Svendsen, Svend

    2016-01-01

    in typical Danish single-family houses constructed in the 1900s. The study provides a simplified theoretical overview of typical building constructions and standards for the calculation of design heat loss and design heating power in Denmark in the 1900s. The heating power and heating demand in six typical...... Danish single-family houses constructed in the 1900s were estimated based on simple steady-state calculations. We found that the radiators in existing single-family houses should not necessarilrbe expected to be over-dimensioned compared to current design heat loss. However, there is considerable...... potential for using low-temperature space heating in existing single-family houses in typical operation conditions. Older houses were not always found to require higher heating system temperatures than newer houses. We found that when these houses have gone through reasonable energy renovations, most...

  4. How to Successfully Renovate a Controls System? - Lessons Learned from the Renovation of the CERN Injectors’ Controls Software

    CERN Document Server

    Kruk, G; Kulikova, O; Lezhebokov, V; Pace, M; Pera Mira, P; Roux, E; Wozniak, J Pawel

    2014-01-01

    Renovation of the control system of the CERN LHC injectors was initiated in 2007 in the scope of the Injector Controls Architecture (InCA) project. One of its main objectives was to homogenize the controls software across CERN accelerators and reuse as much as possible the existing modern sub-systems, such as the settings management used for the LHC. The project team created a platform that would permit coexistence and intercommunication between old and new components via a dedicated gateway, allowing a progressive replacement of the former. Dealing with a heterogeneous environment, with many diverse and interconnected modules, implemented using different technologies and programming languages, the team had to introduce all the modifications in the smoothest possible way, without causing machine downtime. After a brief description of the system architecture, the paper discusses the technical and non-technical sides of the renovation process such as validation and deployment methodology, operational applicatio...

  5. Multi-angled Façade System for Office Building Renovation

    DEFF Research Database (Denmark)

    Hannoudi, Loay Akram; Christensen, Jørgen Erik; Lauring, Michael

    renovating office buildings. The architectural potential is presented with the help of AutoCAD software. The energy efficiency and indoor climate are investigated and evaluated by using correlational research and simulation research methods with the software IDA ICE. From a functional perspective, the multi......-angled façade increases the area of the office room and provides more space. There are many potential aesthetic benefits provided by multi-angled façades such as improved optical and visual quality from inside the office room and the possibility for daylight penetration and a view to outside from one part...... compared to a renovated flat façade varies between 4.9 and 6.5 kWh/(m2.year), depending on the orientation of the façade. The increase in the office room area, when renovated with a multi-angled façade, is by 19%, while the increase of the yearly primary energy consumption (not area weighted), is by 4...

  6. Loose parts monitoring in light water reactor cooling systems

    International Nuclear Information System (INIS)

    Santos, A.; Alma, B.J.

    1982-01-01

    The work related to loose monitoring system for light water reactor, developed at GRS - Munique, are described. The basic problems due to the exact localization and detection of the loose part as well the research activities and development necessary aiming to obtain the best techniques in this field. (E.G.) [pt

  7. Identification of key parameters determining Danish homeowners' willingness and motivation for energy renovations

    DEFF Research Database (Denmark)

    Mortensen, Andrea; Heiselberg, Per Kvols; Knudstrup, Mary-Ann

    2016-01-01

    that the average Danish single-family house owner can be motivated by improvements in comfort, indoor environment and architecture combined with a reasonable economy. The objective of this paper is, based on the motivation survey results, to determine if all homeowners can be assumed as one homogeneous group...... or if there are significant differences among the homeowners, what causes these differences and how does this affect the future motivation strategy. The key parameters for if and how the homeowner can be motivated are related to the homeowner’s position in life: age, children’s’ age, time of ownership, occupation and income....... Furthermore, the results conclude that the homeowners cannot be assumed as one group, but must be seen as individuals. Those who are most likely to be motivated to perform an energy renovation are the younger generation of homeowners. The older generation will be harder to motivate, but results nonetheless...

  8. ECO-TECHNIQUE OF SEWER RENOVATION USING COMPOSITE ...

    African Journals Online (AJOL)

    2011-12-31

    Dec 31, 2011 ... An eco-technical renovation of the sewage system is developed in this paper; this ... structural analysis of a typical shell unit with an ovoid form .... described by five fundamental equations, can be reduced to three equations.

  9. The study of residential life support environment system to initiate policy on sustainable simple housing

    Science.gov (United States)

    Siahaan, N. M.; Harahap, A. S.; Nababan, E.; Siahaan, E.

    2018-02-01

    This study aims to initiate sustainable simple housing system based on low CO2 emissions at Griya Martubung I Housing Medan, Indonesia. Since it was built in 1995, between 2007 until 2016 approximately 89 percent of houses have been doing various home renewal such as restoration, renovation, or reconstruction. Qualitative research conducted in order to obtain insights into the behavior of complex relationship between various components of residential life support environment that relates to CO2 emissions. Each component is studied by conducting in-depth interviews, observation of the 128 residents. The study used Likert Scale to measure residents’ perception about components. The study concludes with a synthesis describing principles for a sustainable simple housing standard that recognizes the whole characteristics of components. This study offers a means for initiating the practice of sustainable simple housing developments and efforts to manage growth and preserve the environment without violating social, economics, and ecology.

  10. High-rise build renovation - Colouring a high-rise building's facade; Renovation des Hochhauses Schoppi Spreitenbach. Farbigkeit einer Hochhausfassade

    Energy Technology Data Exchange (ETDEWEB)

    Enkerli, W.

    2008-07-01

    This illustrated article takes a look at the renovation of the 70-metres high, high-rise apartment building that forms an integral part of a large shopping centre in Spreitenbach, Switzerland. The buildings and their infrastructure, realised in 1970, were in need of renovation. The facade elements no longer met energy requirements and the shopping mall was to be extended to meet modern shopping needs. The article deals with the technical and aesthetic requirements placed on the facades. The colour concept for the venetian blinds integrated into the windows, which includes the use of 20 different shades of colour, is described. A total of 3,200 blinds are fitted. The removal of the old window elements and the fitting of the new facade elements is described and discussed.

  11. Advanced Controls for Residential Whole-House Ventilation Systems

    Energy Technology Data Exchange (ETDEWEB)

    Turner, William [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Walker, Iain [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Sherman, Max [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2014-08-01

    Whole-house ventilation systems are becoming commonplace in new construction, remodeling/renovation, and weatherization projects, driven by combinations of specific requirements for indoor air quality (IAQ), health and compliance with standards, such as ASHRAE 62.2. Ventilation systems incur an energy penalty on the home via fan power used to drive the airflow, and the additional space-conditioning load associated with heating or cooling the ventilation air. Finding a balance between IAQ and energy use is important if homes are to be adequately ventilated while not increasing the energy burden. This study used computer simulations to examine RIVEC the Residential Integrated Ventilation Controller - a prototype ventilation controller that aims to deliver whole-house ventilation rates that comply with ventilation standards, for the minimum use of energy. Four different whole-house ventilation systems were simulated, both with and without RIVEC, so that the energy and IAQ results could be compared. Simulations were conducted for 13 US climate zones, three house designs, and three envelope leakage values. The results showed that the RIVEC controller could typically return ventilation energy savings greater than 40percent without compromising long-term chronic or short-term acute exposures to relevant indoor contaminants. Critical and average peak power loads were also reduced as a consequence of using RIVEC.

  12. Young Nearby Loose Associations

    Science.gov (United States)

    Torres, C. A. O.; Quast, G. R.; Melo, C. H. F.; Sterzik, M. F.

    2008-12-01

    A significant population of stars with ages younger than the Pleiades exists in the solar neighborhood. They are grouped in loose young associations, sharing similar kinematical and physical properties, but, due to their vicinity to the Sun, they are dispersed in the sky, and hard to identify. Their strong stellar coronal activity, causing enhanced X-ray emission, allows them to be identified as counterparts of X-ray sources. The analysis presented here is based mainly on the SACY project, aimed to survey in a systematic way counterparts of ROSAT all-sky X-ray sources in the Southern Hemisphere for which proper motions are known. We give the definition, main properties, and lists of high-probability members of nine confirmed loose young associations that do not belong directly to the well-known Oph-Sco-Cen complex. The youth and vicinity of many members of these new associations make them ideal targets for follow-up studies, specifically geared towards the understanding of planetary system formation. Searches for very low-mass and brown dwarf companions are ongoing, and it will be promising to search for planetary companions with next generation instruments.

  13. Energy Use and Indoor Climate in Two Schools Before and After Deep Energy Renovation

    DEFF Research Database (Denmark)

    Rose, Jørgen; Thomsen, Kirsten Engelund; Mørck, Ove

    2013-01-01

    . The 7 buildings are being energy renovated and monitored with support from the EU-CONCERTO initiative as part of the project “Cost-effective Low-energy Advanced Sustainable So1utions – Class1”. The buildings are very different and therefore the energy renovations to take place will also vary from...... insulation of piping and improved control (Building Energy Management Systems – BEMS). This paper presents preliminary results of analysis and monitoring of energy use and indoor climate in the two public schools before and after deep energy renovation....

  14. Effect of energy renovation on indoor air quality in multifamily residential buildings in Slovakia

    DEFF Research Database (Denmark)

    Földváry, Veronika; Bekö, Gabriel; Langer, Sarka

    2017-01-01

    efficiency of these buildings rarely consider their impact on the indoor air quality (IAQ). The objective of the present study was to evaluate the impact of simple energy renovation on IAQ, air exchange rates (AER) and occupant satisfaction in Slovak residential buildings. Three pairs of identical naturally...... of nitrogen dioxide (NO2), formaldehyde and total and individual volatile organic compounds (VOC) were also measured. CO2 concentrations were significantly higher and AERs were lower in the renovated buildings. Formaldehyde concentrations increased after renovation and were positively correlated with CO2...

  15. Development of Facilities Master Plan and Laboratory Renovation Project

    Energy Technology Data Exchange (ETDEWEB)

    Fox, Andrea D

    2011-10-03

    Funding from this grant has allowed Morehouse School of Medicine to complete its first professionally developed, comprehensive campus master plan that is in alignment with the recently completed strategic plan. In addition to master planning activities, funds were used for programming and designing research renovations, and also to supplement other research facility upgrades by providing lighting and equipment. The activities funded by this grant will provide the catalyst for substantial improvement in the School's overall facilities for biomedical education and research, and will also provide much of the information needed to conduct a successful campaign to raise funds for proposed buildings and renovations.

  16. Rigorous project for existing houses. Energy conservation requires evolution; Rigoureus project voor bestaande woningen. Evolutie voor energiebesparing nodig

    Energy Technology Data Exchange (ETDEWEB)

    Clocquet, R. [DHV, Amersfoort (Netherlands); Koene, F. [ECN Efficiency and Infrastructure, Petten (Netherlands)

    2010-05-15

    How can existing terraced houses be renovated in such a way that their energy use decreases with 75 percent? The Rigorous project of the Energy research Centre of the Netherlands (ECN), TNO, Delft University of Technology and DHV, developed innovative renovation concepts that make such savings feasible by combining constructional measures with installation concepts. On top of that it is also essential that consumer behavior is addressed. [Dutch] Hoe kunnen bestaande rijtjeswoningen zo worden gerenoveerd dat het totale energiegebruik met 75 procent afneemt? In het Rigoureus-project hebben ECN, TNO, TU Delft en DHV innovatieve renovatieconcepten ontwikkeld die dat, door een combinatie van bouwkundige maatregelen en uitgeldende installatieconcepten, mogelijk maken. Daarbij blijkt het van essentieel belang ook het gebruikersgedrag aan te pakken.

  17. Renovation of the CERN Computer Centre

    CERN Multimedia

    Patrice Loïez

    2003-01-01

    The Computer Centre at CERN is seen after half of the equipment is the large ground floor room has been removed. A large-scale spring-cleaning operation took place before renovation work for the new CERN Grid system began. Fifteen kilometres of cables that were no longer needed were removed from the cavity floor for recycling.

  18. European Embedding of Passive Houses. www.europeanpassivehouses.org

    Energy Technology Data Exchange (ETDEWEB)

    Elswijk, M.; Kaan, H. (eds.) [and others

    2008-05-15

    The passive house concept has become a European wide accepted solution to reach a significant energy demand reduction in the built environment. The European Commission has published the ambition to construct newly built ho uses in 2015 accordingly to the passive ho use standard. In most project participating countries this ambition is shared. With the support of the Intelligent Energy Europe program this project 'Promotion of European Passive Houses' (PEP-project) contributed to achieve this ambition to clear the first market barriers internationally to reach the status 'Business As Usual' for passive houses in 2015. The PEP project aimed at the development of easy accessible web based documentation for stakeholders in the building process to solve national market introduction barriers regarding the passive house concept. The project also aimed at the distribution of this information via international and national workshops, seminars and conferences. It can be concluded that the PEP-project has been successful. All participating countries made significant progress in the societal embedding process of passive houses and in most countries the passive house concept is on the brink of breaking through nationally. Further, the PEP-project contributed successfully in the internationalisation of the Internal Passive House Conference and fixed the definition of a passive house for three geographical European regions. Finally, the PEP website with its wealth of information was a powerful tool for promotion of passive houses in Europe. In order to increase the implementation efficiency of the passive house concept it is recommended to develop additional information packages concerning passive house solutions for offices, schools and social homes (e.g. architectural examples, organisational issues); passive house renovations; financial schemes for passive houses; performance oriented quality approach for the design and construction process; industrial

  19. Renovation works at Restaurant 1

    CERN Document Server

    2006-01-01

    Due to the age of the present kitchen and freeflow installations in Restaurant 1, essential renovations are due to be carried out. The planned period for this project is September 2006 to May 2007. Work on the self-service area of the restaurant will commence in November. Every effort will be made to minimise the inconvenience caused to users of the restaurant and we thank you in advance for your co-operation during this period.

  20. Oriënterend laboratoriumonderzoek naar ammoniakemissie uit bodempakketten voor vrijloopstallen = Laboratory study of ammonia emission from bedding materials of freestall dairy cattle houses

    NARCIS (Netherlands)

    Smits, M.C.J.; Dousma, F.; Kupers, G.C.C.; Blanken, K.

    2009-01-01

    In the Netherlands there is growing interest amongst dairy farmers in new housing systems in which animal welfare and health are improved. A promising system in this area is a loose housing system (without cubicles) where cows have a large area with a soft bedding where they can both being active

  1. Barriers for Energy Renovation of Danish Single-Family Houses and Suggested Solutions to Overcome These

    DEFF Research Database (Denmark)

    Mortensen, Andrea; Heiselberg, Per; Knudstrup, Mary-Ann

    2011-01-01

    As much as 40% of the total energy consumption in Denmark is utilized by the building sector and most of this energy is used for heating. Political initiatives have been taken to reduce this amount considerably but for this to happen, the energy consumption of the existing residential housing stock...... must be reduced dramatically. The greatest saving potential is found among the approximately 440.000 standardised single-family houses which were constructed in the 1960’s and 1970’s. It is found that barriers preventing the implementation of this great potential are present in various forms among all...

  2. Extensions and renovations of reactor protection systems

    International Nuclear Information System (INIS)

    Hellmerichs, K.

    1985-01-01

    Increase of requirements by the authorities as to the design of reactor protection systems affected in the last years not only plans being under construction, but also resulted in partly spacious extensions and renovations. While working on the extensions and renovations a lot of problems arose: far-reaching performance of newest guidelines and rules in spite of old plant concepts; partly higher degree of redundancy requirements of the new systems in contrast to the present systems; use of present safeguard systems for new accident countermeasures; designation of priorities between present and new functions, especially in view of fault behaviour of present systems; adaptation of the new I and C equipment to the present signalisation-, operation- and information-arrangements under consideration of the present operational philosophy; spatial incorporation of new equipments; construction as to time without expanding of the planned refuelling phases. Because the KWU has planned and constructed such alterations in nearly 10 plants a lot of experience has been gathered. (author)

  3. PCB i bygninger - afhjælpning, renovering og nedrivning

    DEFF Research Database (Denmark)

    Andersen, Helle Vibeke

    SBi-anvisning 268 beskriver, hvordan PCB-forurening af indeluften afhjælpes, og hvordan PCB håndteres, når man renoverer eller nedriver bygninger med PCB. Uanset om der er tale om afhjælpning, renovering eller nedrivning, kan arbejdet generere PCB-holdigt affald. Anvisningen forklarer derfor......, hvordan affaldet skal håndteres, og hvordan man beskytter mennesker og miljø under arbejdet. Anvisningen er baseret på byggebranchens erfaringer og den aktuelle forskningsbaserede viden om PCB i bygninger. SBi-anvisning 268 afløser den snart fire år gamle SBi-anvisning 242 om renovering af bygninger med...... PCB, som ikke behandlede spørgsmålet om affaldshåndtering....

  4. Development of an enhanced loose parts monitoring system (LPMS)

    International Nuclear Information System (INIS)

    Choi, Y. C.; Park, J. H.; Yoon, D. B.; Choi, K. S.; Sohn, C. H.

    2006-01-01

    LPMS (loose parts monitoring system) is one of the most important structural integrity monitoring systems. It is operated for a early detection of the impacts by loosened or detached metallic, objects on the primary pressure boundary in a nuclear power plant. The impacted parts might cause flow blockage in the fuel channel, prevent the control rod from moving properly, damage the pump impeller, and give rise to cracks on the steam generator tube sheet, etc. In Korea, The LPMS is currently operating in all of the nuclear power plants as a subsystem in the NIMS (NSSS Integrity Monitoring System), However the performances are being deteriorated in both the hardware and software since it was designed in 1980's. In particular the system is not capable of promptly responding to the continuously triggered impacts in a short period failing to monitor the real loose parts. Also the diagnostic tools to estimate the location and the mass or energy of the impact source have not been reflected. Therefore, a new loose parts monitoring system has been developed to improve the capabilities of the current one and ultimately to replace it. An enhanced Loose Parts Monitoring System(LPMS) has been developed by KAERI(Korea Atomic Energy Research Inst.), not only to improve the performance of an on-line signal processing for a monitoring system but also to enhance the evaluation technique of the true impact signals by loose parts. This new system has taken into account the state-of-the-art technology to cover the problems with the conventional system. (authors)

  5. Building America Case Study: Demonstration House of Cold-Climate Solutions for Affordable Housing, Minneapolis, Minnesota

    Energy Technology Data Exchange (ETDEWEB)

    2016-05-01

    Single family homes in urban areas that are available for renovation by nonprofit developers are often in rough shape (1MM to 2MM nationally). Budgeting has historically focused on improving homes to meet basic housing standards. A rising interest in the long-term impact of homeownership has introduced the need to balance basic needs with home performance. This demonstration project aims to help nonprofit affordable housing developers become familiar with three Building America performance measures, the installation processes, and impacts and benefits of each. A story and a half home in North Minneapolis, MN was presented by Urban Homeworks our local nonprofit partner. The team helped them install three researched upgrade measures: exterior roof insulation or 'overcoat,' exterior foundation insulation, or 'excavationless', and a combined space and water heating HVAC system or 'combi'. To maximize efficiency of application and to address budget issues, the Team worked with Urban Homeworks to identify ways to use volunteers and construction training programs to install the measures. An open invitation to visit the job site was extended to other nonprofit developers and industry partners to encourage dialog about the systems during live installation.

  6. NorthernSTAR 1-1/2-Story Demonstration House of Cold Climate Solutions for Affordable Housing

    Energy Technology Data Exchange (ETDEWEB)

    Schirber, T. [Univ. of Minnesota, St. Paul, MN (United States). NorthernSTAR Building America Partnership; Ojczyk, C. [Univ. of Minnesota, St. Paul, MN (United States). NorthernSTAR Building America Partnership; Jacobson, R. [Univ. of Minnesota, St. Paul, MN (United States). NorthernSTAR Building America Partnership

    2016-03-01

    Single family homes in urban areas that are available for renovation by nonprofit developers are often in rough shape (1MM to 2MM nationally). Budgeting has historically focused on improving homes to meet basic housing standards. A rising interest in the long-term impact of homeownership has introduced the need to balance basic needs with home performance. This demonstration project aims to help nonprofit affordable housing developers become familiar with three Building America performance measures, the installation processes, and impacts and benefits of each. A story and a half home in North Minneapolis, MN was presented by Urban Homeworks our local nonprofit partner. The team helped them install three researched upgrade measures: exterior roof insulation or 'overcoat,' exterior foundation insulation, or 'excavationless', and a combined space and water heating HVAC system or 'combi'. To maximize efficiency of application and to address budget issues, the Team worked with Urban Homeworks to identify ways to use volunteers and construction training programs to install the measures. An open invitation to visit the job site was extended to other nonprofit developers and industry partners to encourage dialog about the systems during live installation.

  7. The renovated Almaraz is profitable

    International Nuclear Information System (INIS)

    Vehkanen, S.; Vaelisuo, M.

    2001-01-01

    The Almaraz power plant is situated in the Province of Extremadura in southwestern Spain. In the plant there are two pressurised water reactors that are delivered by Westinghouse and commissioned in the beginning of 1980's. In mid 1990's major renovations were made by Siemens. The plant is very profitable, says plant manager Araluce. The richness of the living nature in the area surrounding the power plant was emphasized in the oral and written presentations. (author)

  8. Renovation work at Restaurant 1

    CERN Multimedia

    2006-01-01

    Due to the age of the present kitchen and freeflow installations in Restaurant 1, essential renovation work is due to be carried out. The work is scheduled to last from September 2006 to May 2007. Work on the self-service area of the restaurant will commence in November. Every effort will be made to minimise the inconvenience caused to users of the restaurant and we thank you in advance for your co-operation during this period.

  9. Method for a component-based economic optimisation in design of whole building renovation versus demolishing and rebuilding

    International Nuclear Information System (INIS)

    Morelli, Martin; Harrestrup, Maria; Svendsen, Svend

    2014-01-01

    Aim: This paper presents a two-fold evaluation method determining whether to renovate an existing building or to demolish it and thereafter erect a new building. Scope: The method determines a combination of energy saving measures that have been optimised in regards to the future cost for energy. Subsequently, the method evaluates the cost of undertaking the retrofit measures as compared to the cost of demolishing the existing building and thereafter erecting a new one. Several economically beneficial combinations of energy saving measures can be determined. All of them are a trade-off between investing in retrofit measures and buying renewable energy. The overall cost of the renovation considers the market value of the property, the investment in the renovation, the operational and maintenance costs. A multi-family building is used as an example to clearly illustrate the application of the method from macroeconomic and private financial perspectives. Conclusion: The example shows that the investment cost and future market value of the building are the dominant factors in deciding whether to renovate an existing building or to demolish it and thereafter erect a new building. Additionally, it is concluded in the example that multi-family buildings erected in the period 1850–1930 should be renovated. - highlights: • Development of a method for evaluation of renovation projects. • Determination of an economic optimal combination of various energy saving measures. • The method compared the renovation cost to those for demolishing and building new. • Decision was highly influence by the investment cost and buildings market value. • The results indicate that buildings should be renovated and not demolished

  10. Investigation of CT picture in so-called loose shoulder

    International Nuclear Information System (INIS)

    Kuroda, Shigehito; Sakamaki, Hiroshi; Matsuoka, Akira; Moriishi, Takeji; Takada, Keiichi.

    1985-01-01

    CT picture of the shoulder joint was analyzed in 124 shoulders (114 patients). A line perpendicular to a given line between the precornu of acetabular tegmen (A) and the postcornu of acetabular tegmen (B) was drawn and the intersection where the line and the caput humeri meet (C) was obtained. The angle of CAB was defined as the backward angular aperture of the acetabular tegmen. The angular aperture was 26.2 0 +-1.9 in 16 so-called loose shoulders, 17.3 0 +-1.0 in 28 loose shoulders restricted to the inward rotation, and 12.2 0 +-0.4 in 80 normal shoulders, showing a distinct correlation between the angular aperture and the degree of loose shoulder. An increased backward angular aperture of the acetabular tegmen was considered greatly attributable to the forward glenohumeral movement resulting from malformation of the acetabular tegmen and flaccidity of the joint. Glenoid osteotomy was thus performed in 9 patients, 6 of whom underwent CT scanning before and after osteotomy. Coronal and transverse CT images of the shoulder joint disclosed a noticeable improvement of the glenohumeral alignment. The angular aperture shown on CT seems to be of major importance not only in the diagnosis of so-called loose shoulder but also in surgical choice. (Namekawa, K.)

  11. 25 CFR 256.17 - What will the servicing housing office do to identify what work is to be done on my dwelling?

    Science.gov (United States)

    2010-04-01

    ... what work is to be done on my dwelling? 256.17 Section 256.17 Indians BUREAU OF INDIAN AFFAIRS... office do to identify what work is to be done on my dwelling? (a) First, a trained and qualified representative of your servicing housing office must visit your dwelling to identify what repairs or renovation...

  12. An integrated urban drainage system model for assessing renovation scheme.

    Science.gov (United States)

    Dong, X; Zeng, S; Chen, J; Zhao, D

    2012-01-01

    Due to sustained economic growth in China over the last three decades, urbanization has been on a rapidly expanding track. In recent years, regional industrial relocations were also accelerated across the country from the east coast to the west inland. These changes have led to a large-scale redesign of urban infrastructures, including the drainage system. To help the reconstructed infrastructures towards a better sustainability, a tool is required for assessing the efficiency and environmental performance of different renovation schemes. This paper developed an integrated dynamic modeling tool, which consisted of three models for describing the sewer, the wastewater treatment plant (WWTP) and the receiving water body respectively. Three auxiliary modules were also incorporated to conceptualize the model, calibrate the simulations, and analyze the results. The developed integrated modeling tool was applied to a case study in Shenzhen City, which is one of the most dynamic cities and facing considerable challenges for environmental degradation. The renovation scheme proposed to improve the environmental performance of Shenzhen City's urban drainage system was modeled and evaluated. The simulation results supplied some suggestions for the further improvement of the renovation scheme.

  13. The Influence on Modal Parameters of Thin Cylindrical Shell under Bolt Looseness Boundary

    Directory of Open Access Journals (Sweden)

    Hui Li

    2016-01-01

    Full Text Available The influence on modal parameters of thin cylindrical shell (TCS under bolt looseness boundary is investigated. Firstly, bolt looseness boundary of the shell is divided into two types, that is, different bolt looseness numbers and different bolt looseness levels, and natural frequencies and mode shapes are calculated by finite element method to roughly master vibration characteristics of TCS under these conditions. Then, the following measurements and identification techniques are used to get precise frequency, damping, and shape results; for example, noncontact laser Doppler vibrometer and vibration shaker with excitation level being precisely controlled are used in the test system; “preexperiment” is adopted to determine the required tightening torque and verify fixed constraint boundary; the small-segment FFT processing technique is employed to accurately measure nature frequency and laser rotating scanning technique is used to get shape results with high efficiency. Finally, based on the measured results obtained by the above techniques, the influence on modal parameters of TCS under two types of bolt looseness boundaries is analyzed and discussed. It can be found that bolt looseness boundary can significantly affect frequency and damping results which might be caused by changes of nonlinear stiffness and damping and in bolt looseness positions.

  14. Contracting and building renovation - does it work together?

    Energy Technology Data Exchange (ETDEWEB)

    Tritthart, Wibke; Bruner-Lienhart, Susanne [Inter-Univ. Research Centre for Technology, Work and Culture, Graz (Austria); Bleyl, Jan W.; Bucar, Gerhard [Graz Energy Agency (Austria)

    2007-07-01

    The renovation or refurbishment is an important point in the life cycle of a building that makes it possible to achieve both environmental and climate protection goals and a higher quality of living of the inhabitants. However, lack of money often leads to a renovation that covers only the basic requirements, whereas measures that are valuable in a long term perspective like energy saving measures are not realised. Energy performance contracting (EPC) is widely used as an instrument to reduce long term operating costs significantly by guaranteed energy savings. An energy service company (ESCo) implements saving technologies, especially in the field of heating, HVAC, lighting and plug loads, and in particular in public buildings. It is the aim of this paper to investigate the possibilities to incorporate construction measures like building envelope insulation into standard energy performance contracting.For this purpose a qualitative survey is presented that was performed among experts and stakeholders in the business: ESCos, building owners and facility managers, representatives of construction companies and financing institutions were interviewed. The focus was on their experiences with such projects, on difficulties that arose or barriers that exist from their point of view and on the chances they perceived. This provides the basis for identifying restraints and supporting factors for the integration of contracting and constructional measures.Three pilot projects that have been renovated in Austria are outlined subsequently. They are evaluated with respect to the contractual network between the project partners, types of guarantees and financing issues. Special emphasis is put on the assignment of tasks and the cash flow between the project partners. Various constellations of trades acted as energy service provider: a general contractor, an energy supply company, a consortium of a builder and a plumber. The projects reveal some differences to the standard energy

  15. Methodical bases of selection and evaluation of the effectiveness of the projects of the urban territory renovation

    Science.gov (United States)

    Sizova, Evgeniya; Zhutaeva, Evgeniya; Chugunov, Andrei

    2018-03-01

    The article highlights features of processes of urban territory renovation from the perspective of a commercial entity participating in the implementation of a project. The requirements of high-rise construction projects to the entities, that carry out them, are considered. The advantages of large enterprises as participants in renovation projects are systematized, contributing to their most efficient implementation. The factors, which influence the success of the renovation projects, are presented. A method for selecting projects for implementation based on criteria grouped by qualitative characteristics and contributing to the most complete and comprehensive evaluation of the project is suggested. Patterns to prioritize and harmonize renovation projects in terms of multi-project activity of the enterprise are considered.

  16. Renovation of housing using a glass skin, extra space, more comfort, better energy performance and an extended life span

    NARCIS (Netherlands)

    Ham, M.; Craenmehr, R.J.M.; Driessen, Ruud

    2005-01-01

    In almost every European country a large stock of houses exists. Many houses are outdated in respect to the space offered to the occupants, the general level of comfort and the energy performance. In the Netherlands some 1,300,000 post war houses built in the 1946 - 1965 period are now outdated and

  17. Density of loose-fill insulation material exposed to cyclic humidity conditions

    DEFF Research Database (Denmark)

    Rasmussen, Torben Valdbjørn

    the granulated loose-fill material is exposed to a climate that is characterised as cyclic humidity conditions (a constant temperature and a relative humidity alternating between two predetermined constant relative humidity levels). A better understanding of the behaviour of granulated loose-fill material...

  18. A Method for Proposing Valued-Adding Attributes in Customized Housing

    Directory of Open Access Journals (Sweden)

    Cynthia S. Hentschke

    2014-12-01

    Full Text Available In most emerging economies, there has been many incentives and high availability of funding for low-cost housing projects. This has encouraged product standardization and the application of mass production ideas, based on the assumption that this is the most effective strategy for reducing costs. However, the delivery of highly standardized housing units to customers with different needs, without considering their lifestyle and perception of value, often results in inadequate products. Mass customization has been pointed out as an effective strategy to improve value generation in low-cost housing projects, and to avoid waste caused by renovations done in dwellings soon after occupancy. However, one of the main challenges for the implementation of mass customization is the definition of a set of relevant options based on users’ perceived value. The aim of this paper is to propose a method for defining value adding attributes in customized housing projects, which can support decision-making in product development. The means-end chain theory was used as theoretical framework to connect product attributes and costumers’ values, through the application of the laddering technique. The method was tested in two house-building projects delivered by a company from Brazil. The main contribution of this method is to indicate the customization units that are most important for users along with the explanation of why those units are the most relevant ones.

  19. DYNAMIC PLANNING INDICATORS FOR OPTIMISING THE ENERGY MODERNISATION OF RESIDENTIAL HOUSING STOCK

    Directory of Open Access Journals (Sweden)

    S. K. Bayramukov

    2016-01-01

    Full Text Available Objectives. In the article, the problem of the optimisation of the energy modernisation of residential housing is examined. Methods. A mathematical model for the optimisation of energy use is developed with the use of dynamic programming techniques. Results. The proposed method of assessing the effectiveness of comprehensive energy-saving measures can improve the quality of decision-making on housing recovery and increase its energy modernisation. The application of mathematical modeling allows for the distribution of funds to projects so that the implementation of organisational and technological solutions consistently implement measures that will lead to optimal social and economic effects. The developed mathematical model also allows the amount of quality housing to be maximised through the implementation of energy-saving and other measures when upgrading the housing stock. Problems concerning the renovation of housing stock are analysed. The concept of housing energy modernisation is introduced. The principal energysaving technologies in housing modernisation are distinguished. A schema for the optimal allocation of funds for energy-saving measures is described. It is assumed that the optimal solution is obtained independently of the number of steps and the initial supply of invested capital.Conclusion. The energy modernisation of the housing stock leads to a reduction in the expenditures of citizens on housing and utilities services, contributing to an increase in the integral index of comfort. A generalised method for optimal control of the housing stock is implemented on the basis of the provided schema for dynamic scheduling of the optimal distribution of funds for energy-saving measures. 

  20. Assessment of risks of loose landslide deposits formed by the 2008 Wenchuan earthquake

    Science.gov (United States)

    Zhang, S.; Zhang, L. M.; Peng, M.; Zhang, L. L.; Zhao, H. F.; Chen, H. X.

    2012-05-01

    A Geographic Information System (GIS)-based quantitative risk assessment methodology was adopted to evaluate the risks of loose deposits formed by the 2008 Wenchuan earthquake along a highway near the epicenter. A total of 305 loose deposits with a total volume of 4.0 × 107 m3 has been identified. A physical model was used to determine the failure probability of these loose deposits under six rainfall scenarios, assuming the loose deposits as infinite slopes. The calculated probability of rain-induced slope failures is verified by the recorded landslides at the same site during a storm in 2010. Seventy-nine out of the 112 rain-induced loose deposit failures are predicted by the reliability analysis, with an accuracy of 71%. The results of reliability analysis and information on the consequence of these rain-induced landslides enable the estimation of the annual societal and individual risks of the loose deposits. Under the rainfall scenarios of 30 mm/12 h and 70 mm/12 h, the estimated annual societal risks reach 8.8 and 7.5, respectively, and the individual risks reach 0.05 and 0.04, respectively, which are very high compared with present risk acceptance criteria. The preliminary assessment provides a benchmark for studying the long-term risks of these loose deposits and engineering decision.

  1. Aspinall Courthouse: GSA's Historic Preservation and Net-Zero Renovation Case Study

    Energy Technology Data Exchange (ETDEWEB)

    Chang, R.; Hayter, S.; Hotchkiss, E.; Pless, S.; Sielcken, J.; Smith-Larney, C.

    2014-10-01

    The federal government is mandated with improving efficiency of buildings, incorporating renewable energy, and achieving net-zero energy operations where possible. These challenges led GSA to consider aligning historic preservation renovations with net-zero energy goals. The Wayne N. Aspinall Federal Building and U.S. Courthouse (Aspinall Courthouse), in Grand Junction, Colorado, is an example of a renovation project that aimed to accomplish both historic preservation and net-zero energy goals.

  2. Renovation of the outside lighting - Bldg. 112 zone

    CERN Multimedia

    GS Department

    2010-01-01

    Due to the renovation of the outside lighting, the traffic will be disrupted along “Route Feynman”. From the water tower (Bldg. 227) to Restaurant Nr. 2 (Bldg. 504) between 18 and 30 August. We recommend great caution. Thank you for your understanding. SEM Group

  3. How to motivate homeowners to invest in sustainable renovation?

    DEFF Research Database (Denmark)

    Galiotto, Nicolas; Heiselberg, Per; Knudstrup, Mary-Ann

    2014-01-01

    important to integrate, aside the societal needs, the individual values which might motivate these decision-makers to undertake such a sustainable renovation. A critical review of decision-aid methods and tools, which are susceptible to be integrated in a process of home renovation, is presented...... in this paper. Methods have been primarily classified on the basis on whether or not they allow incorporating truthfully decision-makers’ individual values while still improving the process effectiveness. Reviewed tools have been classified as building analysis, optimization and decision making tools...... such as constructivist, interactive and iterative process, quantitative attributes and values based on qualitative judgments, simplicity and accuracy of the methods, time use and modularity are furthermore discussed. It is concluded that multi-criteria decision making approaches using interactive and constructivist...

  4. Sole disorders in conventionally managed and organic dairy herds using different housing systems

    DEFF Research Database (Denmark)

    Vaarst, Mette; Hindhede, Jens; Enevoldsen, Carsten

    1998-01-01

    Records of claw trimmings were analyzed in seven organic and six conventional Danish herds (a total of 974 cows). The housing systems represented were tie stall systems, loose housing system with slatted floor (one organic herd), and deep litter systems (deep straw bedding). Occurrence of sole...... stage from 61 to 120 d post partum in cows of other dual purpose breeds was positively associated with the presence of sole ulcer in one leg only in first parity cows. The time of year for claw trimming was a risk factor for acute haemorrhage in first parity cows, with the period from December...

  5. La inversión en energías renovables en Argentina

    OpenAIRE

    Recalde, Marina

    2017-01-01

    En este artículo se analiza en qué medida los factores del entorno de la política energética de un país en desarrollo, tal como Argentina, determinan la evolución de la inversión en energías renovables. La baja calidad institucional del país ayuda a crear condiciones no propicias que contrarrestan el efecto de la política energética, reduciendo los incentivos para invertir en tecnologías renovables. Es necesario entonces mejorar las condiciones institucionales de los países en desarrollo para...

  6. Limitaciones para el desarrollo de energías renovables en Argentina

    OpenAIRE

    Marina Yesica Recalde; Daniel Hugo Bouille; Leónidas Osvaldo Girardin

    2015-01-01

    En las últimas décadas las energías renovables han cobrado impulso a nivel mundial con un significativo impacto sobre el desarrollo sustentable de las naciones. Si bien diferentes trabajos analizan la eficiencia de políticas e instrumentos para la promoción de dichas fuentes, la mayoría de las veces se deja de lado el análisis de cómo el contexto en el cual las políticas son implementadas determina su performance. En este trabajo se analiza el desarrollo de las energías renovables en el merca...

  7. Management of Housing and Public Services of a City: the System and Simulation Approach

    Directory of Open Access Journals (Sweden)

    Bril Mykhailo S.

    2017-12-01

    Full Text Available The article is dedicated to the development of models for management of housing and communal services of a city on the basis of the system approach and simulation modeling. A review of the existing models of urban systems is carried out, their advantages and disadvantages are shown. With the use of the methods of simulation and scenario modeling, a simulation model for management of housing and communal services of a city has been developed, which makes it possible to predict the dynamics of the main socio-economic indicators of development of a city. On the basis of the model, the forecast indicators were simulated according to various scenarios for distributing financial resources for the renovation and maintenance of housing facilities of a city. The main criterion for effectiveness of the scenarios is the level of housing provision for the population. The models built can be used for making managerial decisions by local government authorities as well as in elaborating programs for the urban social and economic development.

  8. We forgot half of the population! The significance of gender in Danish energy renovation projects

    DEFF Research Database (Denmark)

    Tjørring, Lise

    2016-01-01

    that the way people live their everyday lives plays a crucial role in understanding why they choose whether to perform an energy renovation. This study is based on an anthropological investigation of ten Danish families and their decision-making process while receiving free energy advice, which, in many cases......, ended as an energy renovation project in the home. During the study, gender emerged as a significant factor in two ways. First, energy renovations were perceived differently by men and women as a consequence of their different everyday practices. Second, there was a cultural norm about the division...... that contains different gender practices and cultural influences....

  9. Energirenovering af almene boliger

    OpenAIRE

    Mogensen, Marie Louise; Raundahl, Nina

    2010-01-01

    This report draw on the great potential of energy-savings, which exist in the Danish public housing sector. Public housing organisations are able to set the standard for renovations high, as they are well organized and have a great number of members. The project examines the problem: "What barriers must be overcome, and what potentials can be used to promote energy renovations in the public housing sector? This is illustrated by a case study of a renovated house in Albertslund, which now is C...

  10. Socioeconomic Renovation in Viet Nam: The Origin, Evolution, and ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Referred to as doi moi, this "renovation" has produced dramatic changes in ... In this book, Vietnamese scholars describe the origins and impacts of these changes. ... for two Colombian cities were discussed at ADAPTO's second international ...

  11. Interior renovation of a general practitioner office leads to a perceptual bias on patient experience for over one year.

    Science.gov (United States)

    Gauthey, Jérôme; Tièche, Raphaël; Streit, Sven

    2018-01-01

    Measuring patient experience is key when assessing quality of care but can be biased: A perceptual bias occurs when renovations of the interior design of a general practitioner (GP) office improves how patients assessed quality of care. The aim was to assess the length of perceptual bias and if it could be reproduced after a second renovation. A GP office with 2 GPs in Switzerland was renovated twice within 3 years. We assessed patient experience at baseline, 2 months and 14 months after the first and 3 months after the second renovation. Each time, we invited a sample of 180 consecutive patients that anonymously graded patient experience in 4 domains: appearance of the office; qualities of medical assistants and GPs; and general satisfaction. We compared crude mean scores per domain from baseline until follow-up. In a multivariate model, we adjusted for patient's age, gender and for how long patients had been their GP. At baseline, patients aged 60.9 (17.7) years, 52% females. After the first renovation, we found a regression to the baseline level of patient experience after 14 months except for appearance of the office (pInterior renovation of a GP office probably causes a perceptual bias for >1 year that improves how patients rate quality of care. This bias could be reproduced after a second renovation strengthening a possible causal relationship. These findings imply to appropriately time measurement of patient experience to at least one year after interior renovation of GP practices to avoid environmental changes influences the estimates when measuring patient experience.

  12. Childcare outdoor renovation as a built environment health promotion strategy: evaluating the preventing obesity by design intervention.

    Science.gov (United States)

    Cosco, Nilda G; Moore, Robin C; Smith, William R

    2014-01-01

    To evaluate the effectiveness of Preventing Obesity by Design (POD), a childcare center outdoor renovation intervention. Pre-post intervention evaluation. North Carolina licensed childcare centers (N = 27). Preschool children. Outdoor renovation, teacher training. Behavior mapping, Preschool Outdoor Environment Measurement Scale (POEMS), center director interview. Descriptive statistics, ordinary least squares and logistic regressions calculated to assess levels of association between environmental change, children's physical activity (PA), social behaviors, and environmental quality. Qualitative interview data analyzed to help understand intervention impact. Behavior mapping showed that site layout attributes, such as the form (i.e., "single loop" and "double loop") of pathways (functioning as circulation routes and wheeled toy settings), are associated with higher levels of PA. Teacher interaction was associated with decreased children's PA. Absence of teacher or lack of child/child interaction was associated with increased PA. POEMS assessment of environmental quality was higher after renovation. POEMS domains (Physical Space and Teacher/Caregiver Roles) were positively associated with PA. After renovation, 68% of center directors reported positive changes in children's behavior and 40% mentioned edible plant installations as greatest success. Built environment renovation of childcare center outdoors, including looped pathways installation, coupled with teacher training, may support increased PA. Renovation, including food gardens, may be a key to success for preschool health promotion and support change in childcare policy.

  13. Noise analysis and mimic experiments for loose part accident in the primary coolant loop of PWR

    International Nuclear Information System (INIS)

    Yang Xiuzhou; Cheng Tingxiang; Zhang Bin

    1994-01-01

    The basic principle of loose part monitoring is to detect and measure the structure transfer sound generated by impacting of metal loose part with accelerators and to identify and diagnose by the micro-processor. This paper introduces the theoretical base of loose part monitoring, the location and mass estimation of loose part, and three mimic experiment applying noise analysis techniques. It provides some useful preparations for the development of loose part monitoring system

  14. Success for energy efficient renovation of dwellings—Learning from private homeowners

    International Nuclear Information System (INIS)

    Risholt, Birgit; Berker, Thomas

    2013-01-01

    Large scale energy efficient renovation of buildings is one of the most important tools to realize the society's need of a more sustainable building stock. Most Norwegians own their own homes. Therefore private homeowners are a focus group for the government urging to accelerate the dwelling energy efficiency rates. Success factors were identified in the in-depth study of the decision process of eleven homeowners. Large differences in energy use due to the building's condition and the occupants' behavior was encountered in the sample. Only homeowners who were conscious consumers and did not trust expert advice or that had special knowledge due to their professions succeeded in realizing energy efficiency by renovation. Lack of knowledge, bad advice from craftsmen or priority to work that they can do themselves stopped other homeowners from implementing energy efficiency. Increased knowledge on all the gains from energy efficiency, the availability of attractive products and services as well as easy access to reliable advice on the better renovation solutions have a large potential to get more homeowners to make energy efficient choices in the process of renovation. Coordination of more of policy strategies including specific information and incentives are needed to facilitate this. - Highlights: • Private homeowners are a key group to increase the dwelling energy efficiency rates. • The annual energy use varies from 103 kW h/m 2 to 240 kW h/m 2 in similar dwellings. • Homeowners that are conscious consumers or have knowledge succeed in saving energy. • Access to relevant and reliable advice can get homeowners to realize energy savings. • Craftsmen could be mediators between available products and the specific building

  15. Renovation of a mechanical engineering senior design class to an industry-tied and team-oriented course

    Science.gov (United States)

    Liu, Yucheng

    2017-11-01

    In this work, an industry-based and team-oriented education model was established based on a traditional mechanical engineering (ME) senior design class in order to better prepare future engineers and leaders so as to meet the increasing demand for high-quality engineering graduates. In the renovated curriculum, industry-sponsored projects became the most important course component and critical assessment tool, from which problem-solving skills as well as employability skills of the ME students can be fully developed. Hands-on experiences in finite element analysis (FEA) modelling and simulation were also added into the renovated curriculum to promote the application of FEA on engineering design and assessment. Evaluation of the renovated course was conducted using two instruments and the results have shown that the course made the ME senior students more prepared for their future career and a win-win model was created between the industry partner and the ME programme through it. Impact of the renovated syllabus on Accreditation Board for Engineering Technology goals was discussed. Based on the current progress, a more substantial change is being planned to further improve the effectiveness and practicability of this design course. The renovated course was started to offer to the ME senior students at Mississippi State University.

  16. Certain Type Turbofan Engine Whole Vibration Model with Support Looseness Fault and Casing Response Characteristics

    Directory of Open Access Journals (Sweden)

    H. F. Wang

    2014-01-01

    Full Text Available Support looseness fault is a type of common fault in aeroengine. Serious looseness fault would emerge under larger unbalanced force, which would cause excessive vibration and even lead to rubbing fault, so it is important to analyze and recognize looseness fault effectively. In this paper, based on certain type turbofan engine structural features, a rotor-support-casing whole model for certain type turbofan aeroengine is established. The rotor and casing systems are modeled by means of the finite element beam method; the support systems are modeled by lumped-mass model; the support looseness fault model is also introduced. The coupled system response is obtained by numerical integral method. In this paper, based on the casing acceleration signals, the impact characteristics of symmetrical stiffness and asymmetric stiffness models are analyzed, finding that the looseness fault would lead to the longitudinal asymmetrical characteristics of acceleration time domain wave and the multiple frequency characteristics, which is consistent with the real trial running vibration signals. Asymmetric stiffness looseness model is verified to be fit for aeroengine looseness fault model.

  17. Analysis of energy economic renovation for historic wooden apartment buildings in cold climates

    International Nuclear Information System (INIS)

    Arumägi, Endrik; Kalamees, Targo

    2014-01-01

    Highlights: • Energy saving potential in historic wooden apartment buildings is up to 63%. • In historic wooden apartment buildings an economically viable energy saving level is 50%. • The largest energy saving potential lies in heat source and building service systems. • Of the building structures, insulation of the external wall has the highest potential. • New heating and ventilation systems must be installed to fulfill regulations limits. - Abstract: Buildings represent the largest sector of primary energy consumption and play a major role in saving energy and reducing greenhouse gas emissions. Our analysis of energy consumption and potential energy savings is based on field measurements, computer simulations and economic calculations. The average primary energy consumption (PE) of wooden apartment buildings was 331 kW h/(m 2 a) 83% higher than the limit 180 kW h/(m 2 a) set in national regulations for apartment buildings subject to major renovation. The studied buildings represent a high potential for energy savings. The renovation packages were compiled using different insulation measures, HVAC solutions and energy sources to achieve a 20–65% reduction of primary energy. For historic buildings, the renovation solutions that concentrate on the building envelope can be problematic due to the need to preserve cultural and architectural values. Our calculation results indicate that the cost optimal PE level is around 250 kW h/(m 2 a) and the point at which renovation packages recover expenses is around a PE level of 170 kW h/(m 2 a). In terms of the architectural appearance the point at which renovation packages recover expenses is around a PE level of 210 kW h/(m 2 a). We propose to set a different PE limit for historic wooden apartment buildings with an architectural appearance worth preserving

  18. Barriers and opportunities for business collaboration in the nZEB single-family housing renovation market

    NARCIS (Netherlands)

    Trebut, F.; Warmuth, H.; Supper, S.; Hilderson, W.; Artola, I.; Thuring, M.; Van Holm, M.; Münke, R.; Pannier, P.; Bensmann, K.; Haavik, T.; Kleiven, T.; Solberg, S.S.; Kunkel, S.; Faber, M.; Van der Have, J.A.; Mlecnik, E.; Straub, A.

    2014-01-01

    Research was done in Austria, Belgium, Germany, the Netherlands and Norway as part of the Intelligent Energy Europe project, entitled “COHERENO - Collaboration for housing nearly zero-energy renovation” (www.cohereno.eu) to better understand the emergence of collaboration structures for nZEB

  19. Sewerage systems: Overflow problems and renovation methods

    Energy Technology Data Exchange (ETDEWEB)

    Tanttu, Unto [Plancenter Ltd. (Finland)

    1987-12-15

    Total investments in Finland (1984) spent on sewer systems were roughly FIM 590 million. A big share, about 14 % of this sum (FIM 82 million), was spent on rehabilitation of networks. But is this still enough? According to some evaluations the respective amount should be about FIM 500 million for rehabilitation only. So the question, how to keep the performance of sewer networks satisfactory in the future, is really important. The overflow problem is one of the most serious problems caused by old and improperly working sewer systems. Anyhow, several other aspects of a poor condition of sewers are to be seen: - excess hydraulic loading of treatment plants, - normal maintenance and operation (flushing, opening of clogs) increases, and is more expensive, - unexpected renovation works and interruptions in operation cause e.g. troubles in traffic, odour problems in the environment, hygienic hazards etc., - the performance of other underground networks (water pipes, district heating pipes etc.) may be threatened by earth crushings due to old sewers. In this paper a short description of these items is presented as well as a description of the sewer renovation methods used recently in Finland.

  20. Method for a component-based economic optimisation in design of whole building renovation versus demolishing and rebuilding

    DEFF Research Database (Denmark)

    Morelli, Martin; Harrestrup, Maria; Svendsen, Svend

    2014-01-01

    investing in retrofit measures and buying renewable energy. The overall cost of the renovation considers the market value of the property, the investment in the renovation, the operational and maintenance costs. A multi-family building is used as an example to clearly illustrate the application...... of the method from macroeconomic and private financial perspectives. Conclusion: The example shows that the investment cost and future market value of the building are the dominant factors in deciding whether to renovate an existing building or to demolish it and thereafter erect a new building. Additionally...

  1. On Stakeholders and the Decision Making Process Concerning Sustainable Renovation and Refurbishment in Sweden, Denmark and Cyprus

    DEFF Research Database (Denmark)

    Gohardani, Navid; Björk, Folke; Jensen, Per Anker

    2013-01-01

    This article examines the decision making process related to sustainable renovation and refurbishment in buildings. The utilized methodology identifies three distinct phases in order to instigate an engagement in sustainable renovation, by means of questionnaires and semi-structured interviews...

  2. Mass estimation of loose parts in nuclear power plant based on multiple regression

    International Nuclear Information System (INIS)

    He, Yuanfeng; Cao, Yanlong; Yang, Jiangxin; Gan, Chunbiao

    2012-01-01

    According to the application of the Hilbert–Huang transform to the non-stationary signal and the relation between the mass of loose parts in nuclear power plant and corresponding frequency content, a new method for loose part mass estimation based on the marginal Hilbert–Huang spectrum (MHS) and multiple regression is proposed in this paper. The frequency spectrum of a loose part in a nuclear power plant can be expressed by the MHS. The multiple regression model that is constructed by the MHS feature of the impact signals for mass estimation is used to predict the unknown masses of a loose part. A simulated experiment verified that the method is feasible and the errors of the results are acceptable. (paper)

  3. Sustainable renovation of residential buildings and the landlord/tenant dilemma

    International Nuclear Information System (INIS)

    Ástmarsson, Björn; Jensen, Per Anker; Maslesa, Esmir

    2013-01-01

    The landlord/tenant dilemma arises when the interests of landlords and tenants misalign and is one of the greatest barriers hindering the development of sustainable renovation of residential buildings in Europe. The aim of this research is to investigate how regulatory changes and contractual solutions can help solve the landlord/tenant dilemma in relation to sustainable renovation of residential buildings, and how the general awareness of sustainable renovation can be increased. Particular focus is on whether tools like energy performance contracting and energy labeling can help solve the landlord/tenant dilemma. The research was done in relation to the specific situation in Denmark, but theory, information and experiences from other countries were included. The results show that there are plenty of opportunities to overcome the landlord/tenant dilemma, but principal/agent problems can only be overcome with a package solution. In the Danish national context the package solution must consist of legislative changes, financial incentives and better dissemination of information. Therefore, an array of different tools must be integrated and used in cooperation to overcome the dilemma. - Highlights: • There are plenty of opportunities to overcome the landlord/tenant dilemma. • The principal/agent problems can only be overcome with a package solution. • An array of different tools must be integrated and used in cooperation. • Legislative changes, financial incentives and better dissemination of information

  4. A Reflection on Low Energy Renovation of Residential Complexes in Southern Europe

    Directory of Open Access Journals (Sweden)

    Helena Corvacho

    2016-09-01

    Full Text Available The transformation of European existing building stock towards very low energy buildings requires a new approach. In this context, it seems reasonable to think that buildings should no longer be renovated individually but as part of a global energy system. Focusing on larger urban units may present some scale advantages and may constitute an opportunity to change the urban environment in a smart energy way. Specificities of Southern European countries are addressed. Due either to the climate or the life style, there are large differences in energy consumption per dwelling among southern and northern European countries. How much heating energy will be saved by over-insulating building envelopes if people do not feel the need to heat their houses in the first place? In addition, real energy use in buildings frequently shows major differences with respect to the predicted consumption. The definition of realistic solutions demands the availability of realistic predictions. A case of a residential complex in Portugal is used to illustrate the main questions and to conclude that moving from a building to a group of buildings scale may be an interesting challenge for policy makers to look closer in the near future.

  5. The appeal of the green deal: Empirical evidence for the influence of energy efficiency policy on renovating homeowners

    International Nuclear Information System (INIS)

    Pettifor, H.; Wilson, C.; Chryssochoidis, G.

    2015-01-01

    The Green Deal is a major new energy policy designed to support the diffusion of energy efficiency measures in UK homes. This paper provides one of the first empirical examinations of the Green Deal′s success in influencing homeowners’ renovation decisions. Using a repeated measures design in which households were questioned before and after the Green Deal′s launch in January 2013, we assess the policy′s success in raising awareness of energy efficiency. In particular, we test the effectiveness of the Green Deal′s positioning to overcome barriers to renovation among homeowners already interested in or considering energy efficiency measures. Using the innovation decision process (Rogers, 2003) as a conceptual framing of the renovation decision process, we examine whether new information on energy efficiency provided by the Green Deal strengthened intentions and its antecedents. We find that (1) energy efficiency is of potential appeal to all renovators regardless of their attitudes about energy efficiency, (2) energy efficiency opportunities need to be identified in the early stages of renovation when homeowners are thinking about ways to improve their home, and (3) homeowners’ intentions towards energy efficiency are weakened by uncertainty about financial benefits, helping to explain the relatively slow uptake of the Green Deal to-date. - Highlights: • Examines the impact of a major new energy policy, the Green Deal, on intentions towards energy efficiency. • 502 households questioned four months prior to, and seven months after the launch. • Renovating itself is mechanism through which households engage with the Green Deal. • Strengthening beliefs in energy savings accelerates intentions to renovate energy efficiently

  6. Method for Developing and Assessing Holistic Energy Renovation of Multi-Storey Buildings

    DEFF Research Database (Denmark)

    Eriksen, Marlene Stenberg Hagen; Rode, Carsten; Bjarløv, Søren Peter

    A large part of the Danish building stock is from the post-war era, and thus there is an immense need for renovation within a few years. Also there is a persistent focus on energy use in buildings as it corresponds to about 40% of the total energy use in Denmark. However to secure durable solutions....... The assessment method is tested on two case buildings, and the assessment involves all relevant stakeholders including building owner, users, and caretakers. An element of the project looks to the development of new products and solutions for renovation for buildings. As part of the method, user involvement...

  7. Development of loose part signal location estimating technique in high pressured structure

    Energy Technology Data Exchange (ETDEWEB)

    Rhee, Ill Keun; Choi, Jae Won; Kim, Yong Up; Kim, Taek Hwan; Song, Young Joong [Hannam University, Taejon (Korea, Republic of)

    1997-07-01

    The main purpose of this project is to develop the metallic loose parts monitoring and diagnosis technology. This will contribute to the development of the domestic technology, and, at the some time, to the development of related domestic industries. This study has been performed as 3-year-project,= to provide to basic requirements in developing the integrated and intelligent loose part monitoring and diagnosis system for Reactor Pressure Vessel (RPV). The results from this project is expected to be applied to the development of the integrated and intelligent loose part monitoring and diagnosis system which can be used to analyze the main cause of the malfunctioning of the system under the worst circumstance - high temperature, high pressure and high speed of the flow of reactor coolant, with the efficient software package that could classify the characteristics of the metallic loose parts occurred inside the RPV of the nuclear steam supply system. (Author) 39 refs., 7 tabs., 74 figs.

  8. Renovation and Expansion of the Caspary Research Building. Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Grassia, V. L.

    2004-02-07

    Critical to the Hospital's rebuilding efforts have been its public partners at the federal, state, and local government levels who have made a major financial commitment to renovating the Hospital's research infrastructure. To date, the Hospital for Special Surgery (HSS) has been awarded a total of nearly $8.5 million to create and equip new, state-of-the-art laboratories for scientific investigations. The modernization of the Hospital's research facilities was jump-started in 1998 with a $950,000 seed grant from the National Institutes of Health (NIH) to renovate laboratories for immunology research in the Caspary Research Building. Coupled with a matching $5.5 million commitment from HSS, this infusion of NIH funding laid the groundwork for an overhaul of all of the Hospital's research space.

  9. Renovation techniques for fatigue cracked orthotropic steel bridge decks

    NARCIS (Netherlands)

    de Jong, F.B.P.

    2007-01-01

    This dissertation presents the research into renovation techniques for orthotropic steel bridge decks. These techniques are needed to solve fatigue problems in the decks of these bridges, as several fatigue cracks have been detected in the deck structure of these bridges the last decade. A

  10. CEBAF Control Room Renovation

    International Nuclear Information System (INIS)

    Michael Spata; Thomas Oren

    2005-01-01

    The Machine Control Center (MCC) at Jefferson Lab's Continuous Electron Beam Accelerator Facility (CEBAF) was initially constructed in the early 1990s and based on proven technology of that era. Through our experience over the last 15 years and in our planning for the facility's 12 GeV upgrade we reevaluated the control room environment to capitalize on emerging visualization and display technologies and improve workflow processes and ergonomic attributes. This effort also sets the foundation for the redevelopment of the accelerator's control system to deliver high reliability performance with improvements in beam specifications management and information flow. The complete renovation was performed over a three-week maintenance period with no interruption to beam operations. We present the results of this effort

  11. CEBAF Control Room Renovation

    International Nuclear Information System (INIS)

    Michael Spata; Thomas Oren

    2005-01-01

    The Machine Control Center at Jefferson Lab's Continuous Electron Beam Accelerator Facility was initially constructed in the early 1990s and based on proven technology of that era. Through our experience over the last 15 years and in our planning for the facilities 12 GeV upgrade we reevaluated the control room environment to capitalize on emerging visualization and display technologies and improve on workflow processes and ergonomic attributes. This effort also sets the foundation for the redevelopment of the accelerator's control system to deliver high reliability performance with improvements in beam specifications management and information flow. The complete renovation was performed over a three-week period with no interruption to beam operations. We present the results of this effort

  12. Temperature of loose coated particles in irradiation tests

    International Nuclear Information System (INIS)

    Conlin, J.A.

    1975-04-01

    An analysis is presented of the temperature of a monolayer bed of loose High-Temperature Gas-Cooled Reactor (HTGR) type fissioning fuel particles in an annular cavity. Both conduction and radiant heat transfer are taken into account, and the effect of particle contact with the annular cavity surfaces is evaluated. Charts are included for the determination of the maximum surface temperature of the particle coating for any size particle or power generation rate in a fuel bed of this type. The charts are intended for the design and evaluation of irradiation experiments on loose beds of coated fuel particles of the type used in HTGRs. Included in an Appendix is a method for estimating the temperature of a particle in circular hole. (U.S.)

  13. ALPS, Advanced Loose Parts System for Paks NPP

    International Nuclear Information System (INIS)

    Por, G.; Szappanos, G.

    2001-01-01

    Advanced Loose Parts System has two unique features to improve the missed alarm and false alarm rates, which are the major drawbacks of all existing loose parts system. Event selection is based on sequential probability ratio test of whitened signal by auto-regressive modelling, and the classification (as well as localisation) of the events is based on a selflearning artificial intelligence method. Examples of rather good sensitivity of events detection are presented in case of very weak signals, for bursts half-buried in background. Burst found in recorded signals were partly identified having origin in motor operated valve (MOV) vibration. The new feature of the system, namely, automatic recording during start up of main coolant pumps had been successfully tested in this year.(author)

  14. Modern diagnostic systems for loose parts, vibration and leakage monitoring

    International Nuclear Information System (INIS)

    Kunze, U.

    1997-01-01

    The modern diagnostic systems for loose parts, vibration and leakage monitoring of Siemens marked improvements in signal detection, ease of operation, and the display of information. The paper gives an overview on: Loose parts monitoring system KUeS '95 - a computer-based system. The knowledge and experience about loose parts detection incorporated into this system can be characterized as ''intelligence''. Vibration monitoring system SUeS '95 - a fully automated system for early detection of changes in the vibration patterns of the reactor coolant system components and reactor pressure vessel internals. Leak detection system FLUeS - a system that detects even small leaks in steam-carrying components and very accurately determines their location. Leaks are detected on the moisture distribution in a sample air column into which the escaping steam locally diffuses. All systems described represent the latest state of technology. Nevertheless a considerable amount of operational experience can be reported. (author). 5 refs, 10 figs

  15. Renovation of the CERN outdoor lighting

    CERN Multimedia

    GS Department

    2010-01-01

    Due to the renovation of the CERN outdoor lighting, traffic will be limited to one way along “Route Gregory” from the E entrance (France) up to “Route Fermi” just before the water tower between 12th and 23rd July 2010. Disruption can also be expected in the car parks “Les Erables” and “Les Tilleuls” close to building 30 and also the car park in front of building 377, between 19th and 30th July 2010. Thanks for your understanding. SEM Group

  16. Sustainable (Re)Construction : The Potential of the Renovation Market

    NARCIS (Netherlands)

    Usanov, A.; Chivot, E.

    2013-01-01

    The Sustainable Urban (Re)Construction Briefing argues that renovation is going to play an increasingly important role in the overall construction market – for several reasons. One of them is the urgency of climate change mitigation. Europe has a large stock of buildings, which together contribute

  17. Maturity model for strategic collaboration in sustainable building renovation

    DEFF Research Database (Denmark)

    Johansen, Jakob Berg; Jensen, Per Anker; Thuesen, Christian

    2017-01-01

    To enable the construction industry to execute sustainable renovation projects which entails a reduction in use of resources, an increase in productivity and a more socially sustainable construction process, new tools are needed. A maturity model can be a simple and effective tool for a company...

  18. New potentional of high-speed water jet technology for renovating concrete structures

    Science.gov (United States)

    Bodnárová, L.; Sitek, L.; Hela, R.; Foldyna, J.

    2011-06-01

    The paper discusses the background and results of research focused on the action of a high-speed water jet on concrete with different qualities. The sufficient and careful removal of degraded concrete layers is very important for the renovation of concrete structures. High-speed water jet technology is one of the most common methods used for removing degraded concrete layers. Different types of high-speed water jets were tested in the experimental part. The classical technology of a single continuous water jet generated with one nozzle was tested as well as the technology of revolving water jets generated by multiple nozzles (used mainly for the renovation of larger areas). A continuous flat water jet and pulsating flat water jet were tested the first time, because the connection of a water jet with the acoustic generator of a pulsating jet offers new possibilities for the use of a water jet (see [1] and [2]). A water jet with such a modification is capable of efficient action and can even be used for cutting solid concrete with a relatively low consumption of energy. A flat pulsating water jet which can be newly used for renovation seems to be a promising technology.

  19. Perspectives on Near ZEB Renovation Projects for Residential Buildings: The Spanish Case

    Directory of Open Access Journals (Sweden)

    Faustino Patiño-Cambeiro

    2016-08-01

    Full Text Available EU regulations are gradually moving towards policies that reduce energy consumption and its environmental impact. To reach this goal, improving energy efficiency in residential buildings is a key action line. The European Parliament adopted the Near Zero-Energy Building (nZEB as the energy efficiency paradigm through Directive 2010/31/EU, but a common technical and legislative framework for energy renovations is yet to be established. In this paper, the nZEB definition by COHERENO was adopted to evaluate several energy renovation packages in a given building, which is also representative of the Spanish building stock. Global costs are calculated for all of them following EPBD prescriptions. Two economic scenarios are analysed: with entirely private funding and with the current public financial incentives, respectively. The results show the divergence between optimum solutions in terms of costs and of minimum CO2 footprint and maximum energy saving. Moreover, in the absence of enough incentives, some inefficient renovations could achieve a global cost close to the optimal cost. The optimum solution both in terms of energy performance and global costs was carried out and described.

  20. Implicaciones ambientales de las tecnologías de energía renovable

    Directory of Open Access Journals (Sweden)

    Jan Mahirt-Smith

    2011-12-01

    Full Text Available Las tecnologías de energía renovable como la eólica, la solar y la biomasa, hacen un uso del suelo más intenso que las de combustibles fósiles tradicionales y, geográficamente, sus implicaciones ambientales son más heterogéneas, por lo que presentan un gran desafío para las técnicas de evaluación de su ciclo de vida. Este trabajo presenta los resultados de una investigación bibliográfica alrededor de los siguientes temas: 1 cambios en el uso del suelo debido a la mayor producción de energía renovable; 2 impactos del uso de suelo; 3 variabilidad geográfica en el inventario de datos; y 4 efectos de la distribución de energía. Además, se revisa el grado de investigación que actualmente se aplica acerca de las tecnologías de energía renovable en campos como el eólico, el solar y la bioenergía y en la evaluación del ciclo de vida en general.

  1. Ethanol emission from loose corn silage and exposed silage particles

    Science.gov (United States)

    Hafner, Sasha D.; Montes, Felipe; Rotz, C. Alan; Mitloehner, Frank

    2010-11-01

    Silage on dairy farms has been identified as a major source of volatile organic compound (VOC) emissions. However, rates of VOC emission from silage are not accurately known. In this work, we measured ethanol (a dominant silage VOC) emission from loose corn silage and exposed corn silage particles using wind tunnel systems. Flux of ethanol was highest immediately after exposing loose silage samples to moving air (as high as 220 g m -2 h -1) and declined by as much as 76-fold over 12 h as ethanol was depleted from samples. Emission rate and cumulative 12 h emission increased with temperature, silage permeability, exposed surface area, and air velocity over silage samples. These responses suggest that VOC emission from silage on farms is sensitive to climate and management practices. Ethanol emission rates from loose silage were generally higher than previous estimates of total VOC emission rates from silage and mixed feed. For 15 cm deep loose samples, mean cumulative emission was as high as 170 g m -2 (80% of initial ethanol mass) after 12 h of exposure to an air velocity of 5 m s -1. Emission rates measured with an emission isolation flux chamber were lower than rates measured in a wind tunnel and in an open setting. Results show that the US EPA emission isolation flux chamber method is not appropriate for estimating VOC emission rates from silage in the field.

  2. EIAMUO methodology for environmental assessment of the post-war housing estates renovation: Practical application in Seville (Spain)

    International Nuclear Information System (INIS)

    Garrido-Piñero, Julia; Mercader-Moyano, Pilar

    2017-01-01

    This paper reports on the environmental impact assessment of a specific urban fabric: the housing estate. This urban-growth typology arose in the second half of the twentieth century to supply the existing needs of the time. It involved short-term processes, reduced costs, and lower comfort standards, which are far from present European guidelines. Currently, they represent situations of unsustainability in cities worldwide that are undergoing improvement. Here, the environmental impact assessment and minimization for urban organisms (EIAMUO) methodology is presented. This consists of a system of eco-indicators created specifically for estimating the impacts associated with these fabrics. Through its practical application, a snapshot of the current situation is achieved and the targets designed to minimize the environmental impact are proposed. - Highlights: • An environmental-impact minimization methodology for housing estates is proposed. • The paper presents a new definition for city analysis: urban organism. • The areas for the assessment are energy, water, materials and waste and atmosphere. • Energy and water areas determine most of the housing estate environmental behavior. • The building character prevails in the urban organism's environmental assessment.

  3. Experimental analysis and simulation calculation of the inductances of loosely coupled transformer

    Science.gov (United States)

    Kerui, Chen; Yang, Han; Yan, Zhang; Nannan, Gao; Ying, Pei; Hongbo, Li; Pei, Li; Liangfeng, Guo

    2017-11-01

    The experimental design of iron-core wireless power transmission system is designed, and an experimental model of loosely coupled transformer is built. Measuring the air gap on both sides of the transformer 15mm inductor under the parameters. The feasibility and feasibility of using the finite element method to calculate the coil inductance parameters of the loosely coupled transformer are analyzed. The system was modeled by ANSYS, and the magnetic field was calculated by finite element method, and the inductance parameters were calculated. The finite element method is used to calculate the inductive parameters of the loosely coupled transformer, and the basis for the accurate compensation of the capacitance of the wireless power transmission system is established.

  4. Success and fail factors in sustainable real estate renovation projects

    NARCIS (Netherlands)

    Volker, L.

    2011-01-01

    Sustainability remains an important issue for the construction industry. Yet, sustainable real estate developments are still considered as highly ambitious projects. To find out how and why sustainable renovation projects actually became sustainable we systematically evaluated 21 leading Dutch real

  5. Development of estimation algorithm of loose parts and analysis of impact test data

    International Nuclear Information System (INIS)

    Kim, Jung Soo; Ham, Chang Sik; Jung, Chul Hwan; Hwang, In Koo; Kim, Tak Hwane; Kim, Tae Hwane; Park, Jin Ho

    1999-11-01

    Loose parts are produced by being parted from the structure of the reactor coolant system or by coming into RCS from the outside during test operation, refueling, and overhaul time. These loose parts are mixed with reactor coolant fluid and collide with RCS components. When loose parts are occurred within RCS, it is necessary to estimate the impact point and the mass of loose parts. In this report an analysis algorithm for the estimation of the impact point and mass of loose part is developed. The developed algorithm was tested with the impact test data of Yonggwang-3. The estimated impact point using the proposed algorithm in this report had 5 percent error to the real test data. The estimated mass was analyzed within 28 percent error bound using the same unit's data. We analyzed the characteristic frequency of each sensor because this frequency effected the estimation of impact point and mass. The characteristic frequency of the background noise during normal operation was compared with that of the impact test data. The result of the comparison illustrated that the characteristic frequency bandwidth of the impact test data was lower than that of the background noise during normal operation. by the comparison, the integrity of sensor and monitoring system could be checked, too. (author)

  6. Housing and construction chapter 11

    Science.gov (United States)

    Delton Alderman

    2015-01-01

    Highlights •The new residential and renovation construction markets in the US and the Eurozone were valued at $338.7 billion (305.5 billion euros) and $673.3 billion dollars (614.4 billion euros), respectively, in 2014. •In Europe, 55% of the value of the new residential and renovation construction markets in 2014 was in...

  7. The media of sociology: tight or loose translations?

    Science.gov (United States)

    Guggenheim, Michael

    2015-06-01

    Sociologists have increasingly come to recognize that the discipline has unduly privileged textual representations, but efforts to incorporate visual and other media are still only in their beginning. This paper develops an analysis of the ways objects of knowledge are translated into other media, in order to understand the visual practices of sociology and to point out unused possibilities. I argue that the discourse on visual sociology, by assuming that photographs are less objective than text, is based on an asymmetric media-determinism and on a misleading notion of objectivity. Instead, I suggest to analyse media with the concept of translations. I introduce several kinds of translations, most centrally the distinction between tight and loose ones. I show that many sciences, such as biology, focus on tight translations, using a variety of media and manipulating both research objects and representations. Sociology, in contrast, uses both tight and loose translations, but uses the latter only for texts. For visuals, sociology restricts itself to what I call 'the documentary': focusing on mechanical recording technologies without manipulating either the object of research or the representation. I conclude by discussing three rare examples of what is largely excluded in sociology: visual loose translations, visual tight translations based on non-mechanical recording technologies, and visual tight translations based on mechanical recording technologies that include the manipulation of both object and representation. © London School of Economics and Political Science 2015.

  8. Occupational Safety and Health and Healthy Housing: A Review of Opportunities and Challenges.

    Science.gov (United States)

    Jacobs, David E; Forst, Linda

    Occupational safety and health (OSH) risks in construction of healthy housing (HH) have not been examined and collaboration between HH and OSH professionals is inadequate. The World Health Organization is developing international HH guidelines and the International Labour Organization is working to improve OSH in construction globally. We searched for exemplary reports (including gray literature) on construction hazards; preventive measures for occupants and workers; OSH frameworks, laws, and regulations; definitions; and HH. Healthy housing construction typically improves ventilation, moisture and mold, pest control, injury hazards, cleanability, maintenance, accessibility, thermal conditioning, and avoidance of toxic building materials. To date, this work is done without explicit requirements for worker health. Construction is among the most hazardous sectors around the globe, although protective measures are well known, including engineering and administrative controls and provision of personal protective equipment. Residential construction, renovation, repair, and maintenance are fragmented, consisting mostly of small companies without proper OSH training, equipment, and knowledge of HH principles. Residential construction is often undertaken by informal or unauthorized workers, putting them at high risk. Reduced exposure to toxic building materials is an example of a benefit for both workers and occupants if OSH and HH collaboration can be improved. By recognizing that homes under new construction or renovation are both a workplace and a residence, HH and OSH initiatives can apply public health principles to occupants and workers simultaneously. This article publishes key definitions, hazards and interventions common to both fields. A global increase in residential construction and renewed global interest in HH poses both risks and opportunities for primary prevention. Policy and practice interventions can benefit the health of occupants and those who work on

  9. Generalized Skyrme model with the loosely bound potential

    Science.gov (United States)

    Gudnason, Sven Bjarke; Zhang, Baiyang; Ma, Nana

    2016-12-01

    We study a generalization of the loosely bound Skyrme model which consists of the Skyrme model with a sixth-order derivative term—motivated by its fluidlike properties—and the second-order loosely bound potential—motivated by lowering the classical binding energies of higher-charged Skyrmions. We use the rational map approximation for the Skyrmion of topological charge B =4 , calculate the binding energy of the latter, and estimate the systematic error in using this approximation. In the parameter space that we can explore within the rational map approximation, we find classical binding energies as low as 1.8%, and once taking into account the contribution from spin-isospin quantization, we obtain binding energies as low as 5.3%. We also calculate the contribution from the sixth-order derivative term to the electric charge density and axial coupling.

  10. Energías renovables y desarrollo económico. Un análisis para España y las grandes economías europeas

    Directory of Open Access Journals (Sweden)

    María Ángeles Caraballo Pou

    2017-01-01

    Full Text Available Antecedentes: Este trabajo evalúa la sostenibilidad del modelo de desarrollo económico español en el periodo 1980-2010. Asimismo, realiza un análisis comparativo con las grandes economías europeas: Alemania, Francia, Italia y Reino Unido.Metodología: Para alcanzar el objetivo del trabajo se han empleado técnicas de cointegración. Mediante estas técnicas se analiza la relación a largo plazo del consumo de energías renovables y no renovables con el desarrollo económico y la contaminación en el periodo 1980-2010. Tras un proceso de selección de variables, para España se ha utilizado el Producto Interno Bruto (PIB y la Formación Bruta de Capital, para medir el crecimiento, el Índice de Desarrollo Humano y el Capital Social, para el desarrollo, las emisiones de CO2 para la contaminación, el consumo de energía renovable en el sistema eléctrico y el consumo de petróleo para el consumo de energía renovable y no renovable, respectivamente. En segundo lugar, se han comparado los resultados obtenidos para la economía española con las cuatro economías más grandes de la Unión Europea: Alemania, Francia, Italia y Reino Unido. Dada la disponibilidad de datos, para estos países se ha excluido del análisis la Formación Bruta de Capital y el Índice de Desarrollo Humano.Resultados: En primer lugar, para los cinco países analizados se comprueba un impacto positivo del consumo de energía renovable y no renovable sobre el crecimiento y el desarrollo, con un impacto mayor de las energías no renovables. Para los tres países en los que se han incluido las emisiones de CO2 (España, Francia y Reino Unido, el efecto reductor de las renovables sobre las emisiones de CO2 es menor que el efecto contaminante de las no renovables. En segundo lugar, para España, Alemania y Francia se aprecia un proceso de retroalimentación entre el consumo de no renovables, el crecimiento y el desarrollo, que no se observa con el consumo de energ

  11. Subsidence estimation of breakwater built on loosely deposited sandy seabed foundation: Elastic model or elasto-plastic model

    Directory of Open Access Journals (Sweden)

    Jianhua Shen

    2017-07-01

    Full Text Available In offshore area, newly deposited Quaternary loose seabed soils are widely distributed. There are a great number of offshore structures has been built on them in the past, or will be built on them in the future due to the fact that there would be no very dense seabed soil foundation could be chosen at planed sites sometimes. However, loosely deposited seabed foundation would bring great risk to the service ability of offshore structures after construction. Currently, the understanding on wave-induced liquefaction mechanism in loose seabed foundation has been greatly improved; however, the recognition on the consolidation characteristics and settlement estimation of loose seabed foundation under offshore structures is still limited. In this study, taking a semi-coupled numerical model FSSI-CAS 2D as the tool, the consolidation and settlement of loosely deposited sandy seabed foundation under an offshore breakwater is investigated. The advanced soil constitutive model Pastor-Zienkiewics Mark III (PZIII is used to describe the quasi-static behavior of loose sandy seabed soil. The computational results show that PZIII model is capable of being used for settlement estimation problem of loosely deposited sandy seabed foundation. For loose sandy seabed foundation, elastic deformation is the dominant component in consolidation process. It is suggested that general elastic model is acceptable for subsidence estimation of offshore structures on loose seabed foundation; however, Young's modulus E must be dependent on the confining effective stress, rather than a constant in computation.

  12. Automatic characterization of loose parts impact damage risk parameters

    International Nuclear Information System (INIS)

    Glass, S.W.; Phillips, J.M.

    1985-01-01

    Loose parts caught in the high-velocity flows of the reactor coolant fluid strike against nuclear steam supply system (NSSS) components and can cause significant damage. Loose parts monitor systems (LPMS) have been available for years to detect metal-to-metal impacts. Once detected, however, an assessment of the damage risk potential for leaving the part in the system versus shutting it down and removing the part must be made. The principal parameters used in the damage risk assessment are time delays between the first and subsequent sensor indications (used to assess the impact location) and a correlation between the waveform and the impact energy of the part (how hard the part impacted). These parameters are not well suited to simple automatic techniques. The task has historically been performed by loose parts diagnostic experts who base much of their evaluation on experience and subjective interpretation of impact data waveforms. Three of the principal goals in developing the Babcock and Wilcox (B and W) LPMS-III were (a) to develop an accurate automatic assessment for the time delays, (b) to develop an automatic estimate of the impact energy, and (c) to present the data in a meaningful manner to the operator

  13. Zero energy office building renovation; Energieneutrale kantoorrenovatie

    Energy Technology Data Exchange (ETDEWEB)

    Deguelle, D.; Krijnen, M. [DHV, Amersfoort (Netherlands); Heijnis, J. [cepezed, Delft (Netherlands)

    2011-04-15

    Building Brains has been set up by TNO as a cooperative and started September 21, 2009. The aim of the project was to answer the question how the energy consumption in the Netherlands can be reduced by 50% up to 2030 or how the built environment can be made energy-neutral. This issue of the magazine is dedicated to Building Brains project. Four different renovation concepts are compared: energy-neutral renovation that involves the exclusive use of sustainable generated energy;.the application of the passive construction principles; the use of Double Skin Facades; and decentralized facade-integrated installation techniques. Following the results of this study two optimized refurbishment approaches for a zero energy office are designed. [Dutch] Building Brains is een door TNO opgezet samenwerkingsproject dat op 21 september 2009 van start ging. Het doel van het project is antwoord te geven op de vraag hoe tot 2030 het energiegebruik in Nederland kan worden gehalveerd of hoe de gebouwde omgeving energieneutraal kan worden gemaakt. Deze aflevering van het tijdschrift TVVL is vrijwel geheel gewijd aan het Building Brains project. Er is onderzocht hoe verschillende renovatieconcepten scoren. Er zijn vier renovatieconcepten met elkaar vergeleken: energie neutraal renoveren door middel van duurzame energieopwekking, toepassen van het passiefhuisprincipe, toepassen van een tweedehuidfacade en toepassen van een decentrale, gevel-geintegreerde installatie. Uit de studie kwamen twee geoptimaliseerde concepten voor een energieneutrale kantoorrenovatie naar voren.

  14. The University of Michigan, Kellogg Building Expansion & Renovation, Ann Arbor, Michigan.

    Science.gov (United States)

    Design Cost Data, 2001

    2001-01-01

    Presents design, construction, and cost data for the University of Michigan's Kellogg Building expansion and renovation project. A list of project manufacturers and suppliers is provided along with four photographs and four floor plans. (GR)

  15. Post Occupancy Evaluation of 23 Newly Renovated Apartments in Copenhagen

    DEFF Research Database (Denmark)

    Iqbal, Ahsan; Afshari, Alireza

    2016-01-01

    The present article is based on the post occupancy occupants’ perception of indoor air quality of recently renovated 23 residential apartments in Copenhagen. The apartments are equipped with novel mechanical ventilation systems. The apartments can be categorised in four, according to the design o...

  16. CEBAF Control Room Renovation

    International Nuclear Information System (INIS)

    Michael Spata; Anthony Cuffe; Thomas Oren

    2005-01-01

    The Machine Control Center (MCC) at Jefferson Lab's Continuous Electron Beam Accelerator Facility (CEBAF) was constructed in the early 1990s and based on proven technology of that era. Through our experience over the last 15 years and in our planning for the facilities 12 GeV upgrade we reevaluated the control room environment to capitalize on emerging visualization and display technologies and improve on work-flow processes and ergonomic attributes. The renovation was performed in two phases during the summer of 2004, with one phase occurring during machine operations and the latter, more extensive phase, occurring during our semi-annual shutdown period. The new facility takes advantage of advances in display technology, analog and video signal management, server technology, ergonomic workspace design, lighting engineering, acoustic ceilings and raised flooring solutions to provide a marked improvement in the overall environment of machine operations

  17. Moyamoya syndrome in a patient with Noonan-like syndrome with loose anagen hair.

    Science.gov (United States)

    Choi, Jin-Ho; Oh, Moon-Yeon; Yum, Mi-Sun; Lee, Beom Hee; Kim, Gu-Hwan; Yoo, Han-Wook

    2015-03-01

    Noonan-like syndrome with loose anagen hair is one of the RASopathies characterized by Noonan syndrome-like features with unique ectodermal abnormalities. This syndrome is caused by mutations in the SHOC2 gene. We encountered a patient with moyamoya syndrome associated with Noonan-like syndrome with loose anagen hair presenting with transient ischemic attacks. A 6-year-old girl was diagnosed with Noonan-like syndrome with loose anagen hair because of profound short stature and ectodermal anomalies such as sparse and easily pluckable hair. A heterozygous mutation of c.4A>G (p.S2G) in the SHOC2 gene was identified, and recombinant human growth hormone therapy was initiated at 8 years of age. At age 10, she manifested recurrent left hemiplegia. Moreover, cerebrovascular imaging revealed occlusion or narrowing of both internal carotid arteries and both middle cerebral arteries with distal moyamoya-like vessels. She is treated with aspirin and calcium channel blocker. We describe the first case of Noonan-like syndrome with loose anagen hair associated with moyamoya syndrome, although it has been reported to be associated with a few cases of other RASopathies, including Noonan, cardiofaciocutaneous, and Costello syndromes. This report emphasizes the associations between cerebrovascular anomalies and Noonan-like syndrome with loose anagen hair. Copyright © 2015 Elsevier Inc. All rights reserved.

  18. More loosely bound hadron molecules at CDF?

    CERN Document Server

    Bignamini, C; Piccinini, F; Polosa, A D; Riquer, V; Sabelli, C

    2010-01-01

    In a recent paper we have proposed a method to estimate the prompt production cross section of X(3872) at the Tevatron assuming that this particle is a loosely bound molecule of a D and a D*bar meson. Under this hypothesis we find that it is impossible to explain the high prompt production cross section found by CDF at sigma(X(3872)) \\sim 30-70 nb as our theoretical prediction is about 300 times smaller than the measured one. Following our work, Artoisenet and Braaten, have suggested that final state interactions in the DD*bar system might be so strong to push the result we obtained for the cross section up to the experimental value. Relying on their conclusions we show that the production of another very narrow loosely bound molecule, the X_s=D_s D_s*bar, could be similarly enhanced. X_s should then be detectable at CDF with a mass of 4080 MeV and a prompt production cross section of sigma(X_s) \\sim 1-3 nb.

  19. A two-factor method for appraising building renovation and energy efficiency improvement projects

    International Nuclear Information System (INIS)

    Martinaitis, Vytautas; Kazakevicius, Eduardas; Vitkauskas, Aloyzas

    2007-01-01

    The renovation of residential buildings usually involves a variety of measures aiming at reducing energy and building maintenance bills, increasing safety and market value, and improving comfort and aesthetics. A significant number of project appraisal methods in current use-such as calculations of payback time, net present value, internal rate of return or cost of conserved energy (CCE)-only quantify energy efficiency gains. These approaches are relatively easy to use, but offer a distorted view of complex modernization projects. On the other hand, various methods using multiple criteria take a much wider perspective but are usually time-consuming, based on sometimes uncertain assumptions and require sophisticated tools. A 'two-factor' appraisal method offers a compromise between these two approaches. The main idea of the method is to separate investments into those related to energy efficiency improvements, and those related to building renovation. Costs and benefits of complex measures, which both influence energy consumption and improve building constructions, are separated by using a building rehabilitation coefficient. The CCE is used for the appraisal of energy efficiency investments, while investments in building renovation are appraised using standard tools for the assessment of investments in maintenance, repair and rehabilitation

  20. Distributed Interior-point Method for Loosely Coupled Problems

    DEFF Research Database (Denmark)

    Pakazad, Sina Khoshfetrat; Hansson, Anders; Andersen, Martin Skovgaard

    2014-01-01

    In this paper, we put forth distributed algorithms for solving loosely coupled unconstrained and constrained optimization problems. Such problems are usually solved using algorithms that are based on a combination of decomposition and first order methods. These algorithms are commonly very slow a...

  1. Acoustic classification schemes in Europe – Applicability for new, existing and renovated housing

    DEFF Research Database (Denmark)

    Rasmussen, Birgit

    2016-01-01

    The first acoustic classification schemes for dwellings were published in the 1990’es as national standards with the main purpose to introduce the possibility of specifying easily stricter acoustic criteria for new-build than the minimum requirements found in building regulations. Since then, more...... countries have introduced acoustic classification schemes, the first countries updated more times and some countries introduced acoustic classification also for other building categories. However, the classification schemes continued to focus on new buildings and have in general limited applicability...... for existing buildings from before implementation of acoustic regulations, typically in the 1950’es or later. The paper will summarize main characteristics, differences and similarities of the current national quality classes for housing in ten countries in Europe. In addition, the status and challenges...

  2. Fuzzy logic utilization for the diagnosis of metallic loose part impact in nuclear power plant

    International Nuclear Information System (INIS)

    Oh, Y.-G.; Hong, H.-P.; Han, S.-J.; Chun, C.S.; Kim, B.-K.

    1996-01-01

    In consideration of the fuzzy nature of impact signals detected from the complex mechanical structures in a nuclear power plant under operation. Loose Part Monitoring System with a signal processing technique utilizing fuzzy logic is proposed. In the proposed Fuzzy Loose Part Monitoring System design, comprehensive relations among the impact signal features are taken into account in the fuzzy rule bases for the alarm discrimination and impact event diagnosis. Through the performance test with a mock-up facility, the proposed approach for the loose parts monitoring and diagnosis has been revealed to be effective not only in suppressing the false alarm generation but also in characterizing the metallic loose-part impact event, from the points of Possible Impacted-Area and Degree of Impact Magnitude

  3. Pressure and violence

    DEFF Research Database (Denmark)

    Baeten, Guy; Westin, Sara; Pull, Emil

    2017-01-01

    Based on interview material relating to the current wave of housing renovation in Swedish cities, this article will analyse the profit-driven, traumatic and violent displacement in the wake of contemporary large-scale renovation processes of the so-called Million Program housing estates from the ...

  4. Factsheet on Energy Neutral Housing Construction; Infoblad Energieneutrale woningbouw

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2012-08-15

    A brief overview is given of all aspects of energy-neutral building and renovating homes. Besides technique, also attention is given to process, financing, management and maintenance. This factsheet is part of a series of three factsheets on energy neutral construction of houses and buildings. The other two are: 'Factsheet on Energy Neutral Building : Definition and ambition' and 'Factsheet Energy Neutral schools and offices' [Dutch] Een kort overzicht wordt gegeven van alle aspecten van energieneutraal bouwen en renoveren van woningen. Naast techniek komen ook proces, financiering en beheer en onderhoud aan de orde. Dit Infoblad maakt deel uit van een serie van drie Infobladen over energieneutraal bouwen voor woningen en gebouwen. De andere twee zijn: 'Infoblad Energieneutraal bouwen: definitie en ambitie' en 'Infoblad Energieneutrale scholen en kantoren'.

  5. The Use of Vegetation for Social Housing Renovation: a case study in the city of Palermo

    DEFF Research Database (Denmark)

    Pastore, L.; Corrao, R.; Heiselberg, Per

    2013-01-01

    and thermal comfort. To achieve these goals the social housing complex of Medaglie d’Oro in the city of Palermo was chosen as case study in order to carry out some analyses for the assessment of outdoor comfort parameters of the area. By means of numerical simulations performed with the software ENVI...

  6. Gaps in tools assessing the energy implications of renovation versus rebuilding decisions

    DEFF Research Database (Denmark)

    Goldstein, Benjamin Paul; Herbøl, Mads; Meza, Maria Josefina Figueroa

    2013-01-01

    to evaluate project level energy-related decisions than at larger scales. Information gaps identified within assessment tools lead to uncertainty for decision makers about which option improves energy efficiency. In the case of a number of large-scale EU building renovating/renewing projects these tools have......The state of building stocks changes over time. Owners and municipalities face the choice to renovate or rebuild buildings to improve energy efficiency. This review addresses how current sustainability assessment tools support these decisions. It finds that advanced tools are better tailored...... been scarcely used or merely suggested during planning. Recent advances in sustainability assessment tools can begin to close some of the existing knowledge gaps, while incentives and stricter legislation may improve their usage rates....

  7. Estimación del potencial de energías renovables en el estado de Sonora

    Directory of Open Access Journals (Sweden)

    Jorge Luis Taddei Bringas

    2016-06-01

    Full Text Available La etapa de uso de combustibles fósiles está llegando a su fin, debido principalmente a la escasez y problemas de contaminación que originan. En la actualidad existe una marcada tendencia en aprovechar las fuentes renovables de energía, por su bajo impacto ambiental y menor emisión de gases de efecto invernadero (GEI, lo cual contribuye a independizar las políticas energéticas locales de las del mercado global, basadas en la supremacía petrolera. Para obtener el mayor provecho de las energías renovables, es importante determinar el potencial de los distintos recursos energéticos existentes en una región. En este trabajo se presenta una relación del potencial para explotar energías renovables en el estado de Sonora, México, como un paso previo para establecer acciones y políticas que busquen su posible utilización a gran escala.

  8. Revision of documents guide to obtain the renovation of licence of the nuclear power plant of Laguna Verde, Units I and II

    International Nuclear Information System (INIS)

    Jarvio C, G.; Fernandez S, G.

    2008-01-01

    Unquestionably the renovation of license of the nuclear power plants , it this converting in a promising option to be able to gather in sure, reliable form and economic those requests about future energy in the countries with facilities of this type. This work it analyzes four documents guide and their application for the determination of the renovation of it licenses in nuclear plants that will serve of base for their aplication in the Nuclear Power Plant of Laguna Verde Units I and 2. The four documents in question are: the one Inform Generic of Learned Lessons on the Aging (NUREG - 1801), the Standard Revision Plan for the Renovation of License (NUREG - 1800), the Regulatory Guide for Renovation of License (GR-1.188), and the NEI 95-10, developed by the Institute of Nuclear Energy that is an Industrial Guide to Implement the Requirements of the 1OCFR Part 54-the Rule of Renovation of It licenses. (Author)

  9. Energy Consumption and Indoor Climate Measurements in New Low-Energy Houses

    DEFF Research Database (Denmark)

    Mørck, Ove; Andersen, Karen Holmegaard; Bergsøe, Niels Christian

    2013-01-01

    The CLASS1 project commenced in 2007 and involves 5 countries: Denmark, Estonia, France, Italy and Romania. Originally, 442 dwellings, a kindergarten and an activity centre for elderly people were to be designed and constructed as "low-energy class 1" houses according to requirements set by the M......The CLASS1 project commenced in 2007 and involves 5 countries: Denmark, Estonia, France, Italy and Romania. Originally, 442 dwellings, a kindergarten and an activity centre for elderly people were to be designed and constructed as "low-energy class 1" houses according to requirements set...... dwellings and a CO2-neutral district heating network will not be constructed within the timeframe of the project Therefore, a contingency plan was developed introducing the renovation of public buildings and large-scale implementation of solar cells on public buildings of the municipality. The CLASS 1...... project used the requirements to low-energy buildings as a driving force for the technological development of 6 different key building components/technologies: windows, slab and foundation insulation systems, bio-mass gasification, local district heating distribution networks, ventilation heat recovery...

  10. Delimitation and Classified Planning Management of Functional Renovation Zone: Experience of and Discussion on Shenzhen's Practice of Urban Renewal

    Institute of Scientific and Technical Information of China (English)

    Hao Wenxuan; Tong De; Liu Qing; Feng Changchun; Liu Jinxin

    2016-01-01

    Urban renewal is one of the important issues of urban development in China.Along with its development in the contemporary time,China has seen considerable achievements and problems as well in urban renewal.Taking into account that Shenzhen has carried out plenty of explorations on urban planning renewal,this paper takes it as an example to firstly analyze the plights of its urban renewal planning,the shortcomings of its urban renewal projects,and the advantages of functional renovation zones to manifest the necessity of the delimitation and classified planning management of functional renovation zone in urban renewal.It then summarizes the experience of its urban renewal unit planning in terms of the methods of zoning and implementation,and finally discusses the conceptual connotations of functional renovation zone,as well as the logic and characteristics of renovations of its delimitation and classified planning management,in hope of providing other Chinese cities with some references.

  11. Hydraulic mechanism and time-dependent characteristics of loose gully deposits failure induced by rainfall

    Directory of Open Access Journals (Sweden)

    Yong Wu

    2015-12-01

    Full Text Available Failure of loose gully deposits under the effect of rainfall contributes to the potential risk of debris flow. In the past decades, researches on hydraulic mechanism and time-dependent characteristics of loose deposits failure are frequently reported, however adequate measures for reducing debris flow are not available practically. In this context, a time-dependent model was established to determine the changes of water table of loose deposits using hydraulic and topographic theories. In addition, the variation in water table with elapsed time was analyzed. The formulas for calculating hydrodynamic and hydrostatic pressures on each strip and block unit of deposit were proposed, and the slope stability and failure risk of the loose deposits were assessed based on the time-dependent hydraulic characteristics of established model. Finally, the failure mechanism of deposits based on infinite slope theory was illustrated, with an example, to calculate sliding force, anti-sliding force and residual sliding force applied to each slice. The results indicate that failure of gully deposits under the effect of rainfall is the result of continuously increasing hydraulic pressure and water table. The time-dependent characteristics of loose deposit failure are determined by the factors of hydraulic properties, drainage area of interest, rainfall pattern, rainfall duration and intensity.

  12. Determination of the thermophysical properties of loose rocks; Bestimmung der thermophysikalischen Kennwerte von Lockergesteinen

    Energy Technology Data Exchange (ETDEWEB)

    Stegner, Johannes; Seehaus, Rainer; Sass, Ingo [Technische Univ. Darmstadt (Germany). Fachgebiet Angewandte Geothermie

    2012-10-16

    The heat conductivity as well as the temperature conductivity of loose rocks are the most important properties for the quantification of the yields of near-surface geothermal power plants. The more details on the heat conductivity are available, the more economical and sustainable is the dimensioning of a plant. The heat conductivity of loose rocks depends on the heat conductivity of the individual grain size fractions, water content, air pore volume, dry density, pressure conditions and temperature. Actually, a standardized procedure for the determination of geothermal parameters is missing. Thus, a measurement device for the investigation of the heat conductivity and thermal conductivity is developed. This measurement device enables a reproducible investigation of loose rocks optionally at a pressure consistency of up to 7.6 MPa, or at a volume consistency in the temperature range from -10 to +80 Celsius. The functionality of this measurement device can be validated by means of a comparison of measurements and finite element method simulations using loose rock standards. Additionally, the results of the field tests were correlated with in-situ values. In addition to validation of measurement devices, the measurement results are used to create calculation models for the geothermal parameters of loose rocks based on soil mechanical properties.

  13. Oriënterend laboratoriumonderzoek naar ammoniakemissie uit bodempakketten voor vrijloopstallen = Laboratory study of ammonia emission from bedding materials of freestall dairy cattle houses

    OpenAIRE

    Smits, M.C.J.; Dousma, F.; Kupers, G.C.C.; Blanken, K.

    2009-01-01

    In the Netherlands there is growing interest amongst dairy farmers in new housing systems in which animal welfare and health are improved. A promising system in this area is a loose housing system (without cubicles) where cows have a large area with a soft bedding where they can both being active and rest, so called freestalls. Although these systems are already applied in the USA and Israel, little is known about the environmental impacts, and particularly the ammonia emission. The aim of th...

  14. Applications of the renewable energies; Aplicaciones de las energias renovables

    Energy Technology Data Exchange (ETDEWEB)

    Gomez Rocha, Luis Martin [Comision Nacional para el Ahorro de Energia, Mexico, D.F. (Mexico)

    2001-07-01

    The solar energy manifests itself in different forms and its application has been fundamental for the humankind development. These forms are known as renewable energies, since they are energy forms that are renewed or remade with time or that are so abundant on Earth, that they will last for hundreds or thousands of years, either we use them or not. The main advantage of the utilization of the renewable energies in comparison with hydrocarbons is the one of having smaller impact on the environment, which brings about the conservation of nonrenewable resources, and to postpone its exhaustion. They allow the distributed generation, diminishing the power losses in the transmission and distribution systems, which increases the overall efficiency. In addition they can be the drive for regional development and generation of employment, because when having applications in remote zones and being a field still not completely developed in Mexico, the possibility exists of enabling professionals and technicians. From the point of view of the power sector, the renewable energies extend the supply and availability of energy, making more flexible and independent the operation and reliability of the national power system. [Spanish] La energia solar se manifiesta de diversas formas y su aplicacion ha sido fundamental para el desarrollo de la humanidad. A estas formas se les conoce como energias renovables, ya que son formas de energia que se van renovando o rehaciendo con el tiempo o que son tan abundantes en la tierra, que perduraran por cientos o miles de anos, las usemos o no. La principal ventaja del aprovechamiento de las energias renovables en comparacion con los hidrocarburos es la de tener menor impacto al medio ambiente, lo que trae consigo la conservacion de recursos no renovables, y posponer su termino. Permiten la generacion distribuida, disminuyendo las perdidas energeticas en los sistemas de transmision y distribucion, lo que incrementa la eficiencia general. Ademas

  15. Aprovechamiento de recursos renovables en la obtención de nuevos materiales

    Directory of Open Access Journals (Sweden)

    Sandra Liliana Gómez Ayala

    2018-02-01

    Full Text Available La producción de plásticos a nivel mundial presenta cifras abrumadoras debido a que tienen aplicaciones en diferentes campos, desde la medicina hasta la industria de empaques. Uno de los problemas radica en que la materia prima para preparar esos plásticos proviene de fuentes fósiles, los principales responsables de las emisiones de dióxido de carbono a la atmósfera y después de usar esos materiales se desechan y tardan varios años en descomponerse. Otro problema está enfocado hacia la agricultura e incluye los procesos que generan desechos orgánicos como la industria azucarera y del café, que pueden contaminar el medio ambiente sin tratamiento adecuado. Cada vez cobra más importancia reemplazar los plásticos convencionales por biomateriales cuyos sustratos de partida provengan de fuentes renovables, que sean biodegradables y que puedan tener aplicaciones similares a los materiales convencionales. Por ello, en este artículo se destacan los últimos avances en el área de los materiales a partir de recursos renovables, en especial de los polímeros biobasados, de su biodegradabilidad y sus aplicaciones, para generar curiosidad y propiciar la búsqueda de alternativas de aprovechamiento de las fuentes renovables en la obtención de nuevos biopolímeros.

  16. Patient satisfaction is biased by renovations to the interior of a primary care office: a pretest-posttest assessment.

    Science.gov (United States)

    Tièche, Raphaël; da Costa, Bruno R; Streit, Sven

    2016-08-11

    Measuring quality of care is essential to improve primary care. Quality of primary care for patients is usually assessed by patient satisfaction questionnaires. However, patients may not be able to judge quality of care without also reflecting their perception of the environment. We determined the effect that redesigning a primary care office had on patient satisfaction. We hypothesized that renovating the interior would make patients more satisfied with the quality of medical care. We performed a Pretest-Posttest analysis in a recently renovated single-practice primary care office in Grenchen, Switzerland. Before and after renovation, we distributed a questionnaire to assess patient satisfaction in four domains. We chose a Likert scale (1 = very poor to 6 = very good), and 12 quality indicators, and included two consecutive samples of patients presenting at the primary care office before (n = 153) and after (n = 153) interior design renovation. Response rate was high (overall 85 %). The sample was similar to the enlisted patient collective, but the sample population was older (60 years) than the collective (52 years). Patient satisfaction was higher for all domains after the office was renovated (p patient satisfaction, including satisfaction in domains otherwise unchanged. Physician skills and patient satisfaction sometimes depend on surrounding factors that may bias the ability of patients to assess the quality of medical care. These biases should be taken into account when quality assessment instruments are designed for patients.

  17. A BIM-based system for demolition and renovation waste estimation and planning.

    Science.gov (United States)

    Cheng, Jack C P; Ma, Lauren Y H

    2013-06-01

    Due to the rising worldwide awareness of green environment, both government and contractors have to consider effective construction and demolition (C&D) waste management practices. The last two decades have witnessed the growing importance of demolition and renovation (D&R) works and the growing amount of D&R waste disposed to landfills every day, especially in developed cities like Hong Kong. Quantitative waste prediction is crucial for waste management. It can enable contractors to pinpoint critical waste generation processes and to plan waste control strategies. In addition, waste estimation could also facilitate some government waste management policies, such as the waste disposal charging scheme in Hong Kong. Currently, tools that can accurately and conveniently estimate the amount of waste from construction, renovation, and demolition projects are lacking. In the light of this research gap, this paper presents a building information modeling (BIM) based system that we have developed for estimation and planning of D&R waste. BIM allows multi-disciplinary information to be superimposed within one digital building model. Our system can extract material and volume information through the BIM model and integrate the information for detailed waste estimation and planning. Waste recycling and reuse are also considered in our system. Extracted material information can be provided to recyclers before demolition or renovation to make recycling stage more cooperative and more efficient. Pick-up truck requirements and waste disposal charging fee for different waste facilities will also be predicted through our system. The results could provide alerts to contractors ahead of time at project planning stage. This paper also presents an example scenario with a 47-floor residential building in Hong Kong to demonstrate our D&R waste estimation and planning system. As the BIM technology has been increasingly adopted in the architectural, engineering and construction industry

  18. Roof renovation of buildings 128 and 129

    CERN Multimedia

    2015-01-01

    The roof renovation of buildings 128 and 129 is scheduled to take place from 17 August to 15 October 2015.   During this period, access to the "raw material" workshop will be limited and controlled due to asbestos removal. Collecting your orders directly from the building will be difficult, or even impossible, and urgent requests will be difficult to carry out. We therefore ask you to create your requests via EDH, so that delivery may be carried out as soon as possible. Thank you for your understanding. GS Department

  19. Mobilization for energy renovation. Preliminary results of a survey on rational and heuristic thinking of the dwellers.

    OpenAIRE

    Taranu, Victoria; Verbeeck, Griet

    2016-01-01

    Mobilization for energy renovation. The commonly used policies to encourage the uptake of energy efficient measures in renovations are mostly based on monetary incentives and information provision. Both these approaches have the underlying assumption that dwellers act exclusively as rational homo economicus, who has unlimited intellectual capabilities to calculate long term ROI. However, recent findings show evidence that people have bounded rationality and bounded willpower. A survey was...

  20. KPI-Driven Methodology for Urban Renovation at District Level. Sustainable Strategic Urban Planning

    Directory of Open Access Journals (Sweden)

    Cristina Criado

    2018-03-01

    Full Text Available Sustainable urban renovation is characterized by multiple factors (e.g., technical, socio-economic, environmental and ethical perspectives, different spatial scales and a number of administrative structures that should address the evaluation of alternative scenarios or solutions. This defines a complex decision problem that includes different stakeholders where several aspects need to be considered simultaneously. In spite of the knowledge and experiences during the recent years, there is a need of methods that lead the decision-making processes. In response, a methodology based on a KPI-driven approach for urban renovation at district level is proposed in the European Smart City project CITyFiED. The methodology is a procedure with the energy efficiency as main pillar and the local authorities as client. It is composed of seven phases that ensures an effective dialogue among all the stakeholders, aiming to understand the objectives and needs of the city to deliver a set of customized Strategies for Sustainable Urban Renovation. In order to provide guidance and quantitative criteria, three levels of indicators are integrated into the approach: City Level Indicators (L1 at city & district level, Project Level KPIs (L2, and Impact Assessment Indicators at city level (L3.

  1. Instalación eléctrica de una vivienda unifamiliar aislada mediante suministro de energías renovables

    OpenAIRE

    LOZANO VALLADOLID, FERNANDO

    2015-01-01

    [ES] Instalación eléctrica con grado de electrificación elevada de una vivienda unifamiliar aislada mediante suministro de energías renovables (solar, eólica, geotérmicas). Lozano Valladolid, F. (2015). Instalación eléctrica de una vivienda unifamiliar aislada mediante suministro de energías renovables. http://hdl.handle.net/10251/58751. TFGM

  2. Loose Coupling of Wearable-Based INSs with Automatic Heading Evaluation

    Directory of Open Access Journals (Sweden)

    Dina Bousdar Ahmed

    2017-11-01

    Full Text Available Position tracking of pedestrians by means of inertial sensors is a highly explored field of research. In fact, there are already many approaches to implement inertial navigation systems (INSs. However, most of them use a single inertial measurement unit (IMU attached to the pedestrian’s body. Since wearable-devices will be given items in the future, this work explores the implementation of an INS using two wearable-based IMUs. A loosely coupled approach is proposed to combine the outputs of wearable-based INSs. The latter are based on a pocket-mounted IMU and a foot-mounted IMU. The loosely coupled fusion combines the output of the two INSs not only when these outputs are least erroneous, but also automatically favoring the best output. This approach is named smart update. The main challenge is determining the quality of the heading estimation of each INS, which changes every time. In order to address this, a novel concept to determine the quality of the heading estimation is presented. This concept is subject to a patent application. The results show that the position error rate of the loosely coupled fusion is 10 cm/s better than either the foot INS’s or pocket INS’s error rate in 95% of the cases.

  3. Loose Coupling of Wearable-Based INSs with Automatic Heading Evaluation.

    Science.gov (United States)

    Bousdar Ahmed, Dina; Munoz Diaz, Estefania

    2017-11-03

    Position tracking of pedestrians by means of inertial sensors is a highly explored field of research. In fact, there are already many approaches to implement inertial navigation systems (INSs). However, most of them use a single inertial measurement unit (IMU) attached to the pedestrian's body. Since wearable-devices will be given items in the future, this work explores the implementation of an INS using two wearable-based IMUs. A loosely coupled approach is proposed to combine the outputs of wearable-based INSs. The latter are based on a pocket-mounted IMU and a foot-mounted IMU. The loosely coupled fusion combines the output of the two INSs not only when these outputs are least erroneous, but also automatically favoring the best output. This approach is named smart update. The main challenge is determining the quality of the heading estimation of each INS, which changes every time. In order to address this, a novel concept to determine the quality of the heading estimation is presented. This concept is subject to a patent application. The results show that the position error rate of the loosely coupled fusion is 10 cm/s better than either the foot INS's or pocket INS's error rate in 95% of the cases.

  4. Structural looseness investigation in slow rotating permanent magnet generators

    DEFF Research Database (Denmark)

    Skrimpas, Georgios Alexandros; Mijatovic, Nenad; Sweeney, Christian Walsted

    2016-01-01

    Structural looseness in electric machines is a condition influencing the alignment of the machine and thus the overall bearing health. In this work, assessment of the above mentioned failure mode is tested on a slow rotating (running speed equal to 0.7Hz) permanent magnet generator (PMG), while...... collecting vibration and current data in order to cross-reference the indications from the two monitoring techniques. It is found that electric signature analysis shows no response even when two hold down bolts are untightened, whereas the analysis results from the vibration data exhibit superior performance....... The vibration-based condition indicators with the best response are the stator slot pass frequency, which can be directly related to the cogging torque in PMGs, and the 4th electric frequency harmonic, whose amplitudes increase due to the overall lower structure damping coefficient under looseness...

  5. 76 FR 12106 - Lead-Based Paint Renovation, Repair and Painting Activities in Target Housing and Child Occupied...

    Science.gov (United States)

    2011-03-04

    ..., Technical Contact, Toxics and Pesticides Branch, Water, Wetlands, and Pesticides Division, Environmental... housing in the State of Kansas. Individuals and firms falling under the North American Industrial... exhaustive, but rather provides a guide for readers regarding entities likely to be affected by this action...

  6. Renovating Interior Office Space: What a Manager Needs To Consider.

    Science.gov (United States)

    Babey, Evelyn R.

    When planning an office renovation, a manager should design an office layout that is efficient and should consider the psychological aspects of office design, including sound level, color harmony, and lighting. The manager must also have a good understanding of all phases of the project plan and the timing involved. There are basically five phases…

  7. Involvement of Individuals in the Development of Technical Solutions and Rules of Management for Building Renovation Projects: A Case Study of Latvia

    Science.gov (United States)

    Pukite, I.; Grekis, A.; Geipele, I.; Zeltins, N.

    2017-08-01

    In March 2016, the Latvian government approved a new support program for increasing energy efficiency in residential apartment buildings. For the support of renovation of apartment buildings in the period from 2016 to 2023, 166 470 588 EUR will be available. Different persons, such as energy auditors, designers, architects, project managers and builders, will be involved in the process of planning, development and implementation of building renovation. At the development stage of the building renovation project, special attention should be devoted to the first stage - energy audit and technical project development. The problem arises due to the fact that each of these individuals, during the development of technical building documentation, does not work as a completely unified system. The implementation of construction project planning and organisational management system is one of the most important factors to guarantee that the quality of building renovation project is ensured in accordance with the laws and regulatory standards. The paper studies mutual cooperation, professionalism and the role of information feedback of personnel involved in the planning stage of building renovation, which is an essential prerequisite for the renovation process in order to achieve high quality of work and reduce the energy performance indicator. The present research includes the analysis of different technical solutions and their impact on energy efficiency. Mutual harmonisation of technical specifications is also investigated.

  8. Trusses Of Tensegrity Type In A Concept Of Train Station Renovation In Żary

    Directory of Open Access Journals (Sweden)

    Lechocka Paulina

    2015-09-01

    Full Text Available The first railway station in Żary was built in 1843 in Germany. After the Second World War and years of socialism in Poland the meaning of railway decreased and its technical condition deteriorated. Now the building needs renovation and change of function. Tensegrity structures may be useful in renovation of platforms shelter. They are strut and tie construction, in which there is self-stabilization between compressed and tensioned elements. Conception of new platform shelter is based on exemplary tensegrity module consist of three struts and nine cables (called „Simplex”. Tensegrity would make railway station more modern, but not cover its original elevation.

  9. Delimitation and Classified Planning Management of Functional Renovation Zone: Experience of and Discussion on Shenzhen’s Practice of Urban Renewal

    Institute of Scientific and Technical Information of China (English)

    Hao; Wenxuan; Tong; De; Liu; Qing; Feng; Changchun

    2016-01-01

    Urban renewal is one of the important issues of urban development in China.Along with its development in the contemporary time,China has seen considerable achievements and problems as well in urban renewal.Taking into account that Shenzhen has carried out plenty of explorations on urban planning renewal,this paper takes it as an example to firstly analyze the plights of its urban renewal planning,the shortcomings of its urban renewal projects,and the advantages of functional renovation zones to manifest the necessity of the delimitation and classified planning management of functional renovation zone in urban renewal.It then summarizes the experience of its urban renewal unit planning in terms of the methods of zoning and implementation,and finally discusses the conceptual connotations of functional renovation zone,as well as the logic and characteristics of renovations of its delimitation and classified planning management,in hope of providing other Chinese cities with some references.

  10. Curricular renovation in the phonoaudiology program of the University of Cauca: a proposal for educational quality

    Directory of Open Access Journals (Sweden)

    Liliana María Pérez-Tenorio

    2010-09-01

    Full Text Available In Colombia, the Superior Education is going through a transformation process. These changes must be in coherence with the formulation of flexible policies among the diverse components of the curriculum and with the need for new forms of working and producing knowledge. The curricular renovation must ref lect an educational quality compromise and contribute to generate human development with high social impact. This article presents a proposal for Curricular Renovation, elaborated by faculty and students of the Phonoaudiology Program of the University of Cauca. This document contains aspects related to the pedagogic model, didactics, faculty-student relation, systems of evaluation and plan of studies. Furthermore, in this document the bases for the Route of Curricular Renovation are presented, consisting of the following phases: background, diagnosis and operational plan. These should facilitate the academic integration for adjusting the curricular processes to the needs of the academic program in a local, national and international context.

  11. Decision Support Model for Mosque Renovation and Rehabilitation (Case Study: Ten Mosques in Jakarta Barat, Indonesia)

    Science.gov (United States)

    Utama, D. N.; Triana, Y. S.; Iqbal, M. M.; Iksal, M.; Fikri, I.; Dharmawan, T.

    2018-03-01

    Mosque, for Muslim, is not only a place for daily worshipping, however as a center of culture as well. It is an important and valuable building to be well managed. For a responsible department or institution (such as Religion or Plan Department in Indonesia), to practically manage a lot of mosques is not simple task to handle. The challenge is in relation to data number and characteristic problems tackled. Specifically for renovating and rehabilitating the damaged mosques, a decision to determine the first damaged mosque priority to be renovated and rehabilitated is problematic. Through two types of optimization method, simulated-annealing and hill-climbing, a decision support model for mosque renovation and rehabilitation was systematically constructed. The method fuzzy-logic was also operated to establish the priority of eleven selected parameters. The constructed model is able to simulate an efficiency comparison between two optimization methods used and suggest the most objective decision coming from 196 generated alternatives.

  12. Time domain models for damping-controlled fluidelastic instability forces in multi-span tubes with loose supports

    International Nuclear Information System (INIS)

    Hassan, M.A.; Rogers, R.J.; Gerber, A.G.

    2009-01-01

    This paper presents simulations of a loosely supported multi-span tube subjected to turbulence and fluidelastic instability forces. Several time-domain fluid force models simulating the damping controlled fluidelastic instability mechanism in tube arrays have been presented. These models include the negative damping model based on the Connors equation, fluid force coefficient-based models (Chen and Tanaka and Takahara), and two semi-analytical models (Price and Paidoussis; and Lever and Weaver) were implemented in an in-house finite code. Time domain modeling challenges for each of these theories were discussed. The implemented models were validated against available experimental data. The linear simulations showed that the Connors-equation based model exhibits the most conservative prediction of the critical flow velocity when the recommended design values for the Connors equation were used. The models were then utilized to simulate the nonlinear response of a three-span cantilever tube in a square lattice bar support subjected to air crossflow. The tube was subjected to a single-phase flow passing over one of the tube's spans. For each of these models the flow velocity and the support clearance were varied. Special attention was paid to the tube/support interaction parameters that affect wear, such as impact forces, contact ratio, and normal work rate. As the prediction of the linear threshold varies depending on the utilized model, the nonlinear response also differs. The investigated models exhibit similar response characteristics for the impact force, tip lift response, and work rate. Simulation results show that the Connors-based model underestimates the response and the tube/support interaction parameters for the loose support case. (author)

  13. Successful sustainable renovation; Succesvolle duurzame renovatie

    Energy Technology Data Exchange (ETDEWEB)

    Van Doorn, A.Q.C.M.; De Ruyter, G.M. [Yacht, Randstad, Diemen (Netherlands); Kaper, A.A. [Ballast Nedam, Nieuwegein (Netherlands)

    2011-04-15

    Building Brains has been set up by TNO as a cooperative and started September 21, 2009. The aim of the project was to answer the question how the energy consumption in the Netherlands can be reduced by 50% up to 2030 or how the built environment can be made energy-neutral. This issue of the magazine is dedicated to Building Brains project. It is often said that Smart defined ambitions and strict process management are important ingredients for successful realization of building projects. Sustainable real estate developments can be considered as highly ambitious projects. To find out how and why sustainable renovation projects actually became sustainable, a group of professionals systematically evaluated 21 leading Dutch real estate renovation projects. For each project they interviewed the client, consultant, architect and contractor. Based on the results it was concluded that a pre-defined (sustainability) ambition is not a necessity to realize a project that can be considered sustainable in practice. [Dutch] Building Brains is een door TNO opgezet samenwerkingsproject dat op 21 september 2009 van start ging. Het doel van het project is antwoord te geven op de vraag hoe tot 2030 het energiegebruik in Nederland kan worden gehalveerd of hoe de gebouwde omgeving energieneutraal kan worden gemaakt. Deze aflevering van het tijdschrift TVVL is vrijwel geheel gewijd aan het Building Brains project. Een jaar lang zijn de succes- en faalfactoren van duurzame renovatieprojecten onderzocht. Voor 21 projecten zijn in totaal 73 actoren geinterviewd. Er werd een vragenlijst gebruikt, die vanuit vijf invalshoeken was opgesteld: ambitiestelling, duurzame maatregelen, actoren, beleidsomgeving en proces. Per project zijn opdrachtgevers, architecten, aannemers, adviseurs en gebruikers geinterviewd. Alle data is verwerkt in een database. De projecten voldoen aan het selectiecriterium Trias Energetica. Het accent lag op woningbouw, waar de grootste uitdaging ligt voor duurzame

  14. Build, renovate and invest economically - Efficiency and economic viability in harmony

    International Nuclear Information System (INIS)

    Meier, R.; Beck, M.; Previdoli, P.

    2002-01-01

    This book presents 13 papers that provide the latest know-how on energy economics in the building area. The authors show the importance of information and knowledge transfer when using new energy technologies. The topics covered include the role of the Swiss research programme on energy economy fundamentals, indicator systems for sustainability factors and energy characteristics of buildings. Also a discussion of the question 'rebuild or renovate', as well a series of articles about low-flow mechanical ventilation and the marketing of low-energy consumption building concepts are presented. Further articles cover the marketing of thermal solar systems as well as technology dissemination and monitoring. Also, the marginal costs of energy efficiency measures and the potential for energy savings and environmental management in trade and industry are discussed. Finally, two papers deal with the application of Swiss SIA building standards as well as technical developments and energy efficiency in the building and renovation areas

  15. Tapping and listening: a new approach to bolt looseness monitoring

    Science.gov (United States)

    Kong, Qingzhao; Zhu, Junxiao; Ho, Siu Chun Michael; Song, Gangbing

    2018-07-01

    Bolted joints are among the most common building blocks used across different types of structures, and are often the key components that sew all other structural parts together. Monitoring and assessment of looseness in bolted structures is one of the most attractive topics in mechanical, aerospace, and civil engineering. This paper presents a new percussion-based non-destructive approach to determine the health condition of bolted joints with the help of machine learning. The proposed method is very similar to the percussive diagnostic techniques used in clinical examinations to diagnose the health of patients. Due to the different interfacial properties among the bolts, nuts and the host structure, bolted joints can generate unique sounds when it is excited by impacts, such as from tapping. Power spectrum density, as a signal feature, was used to recognize and classify recorded tapping data. A machine learning model using the decision tree method was employed to identify the bolt looseness level. Experiments demonstrated that the newly proposed method for bolt looseness detection is very easy to implement by ‘listening to tapping’ and the monitoring accuracy is very high. With the rapid in robotics, the proposed approach has great potential to be implemented with intimately weaving robotics and machine learning to produce a cyber-physical system that can automatically inspect and determine the health of a structure.

  16. Effect of renovating an office building on occupants' comfort and health

    DEFF Research Database (Denmark)

    Pejtersen, Jan; Brohus, H.; Hyldgaard, C. E.

    2001-01-01

    . Before the floor material was installed in the office building, a full-scale exposure experiment was performed in the laboratory. The new ventilation strategy and renovation of the HVAC system were selected on the basis of laboratory experiments on a full-scale mock-up of a cellular office. The severity...

  17. Gobernanza global y evolución de las energías renovables en el sur. Objetivos políticos y estructuras de gobernanza

    OpenAIRE

    Wolfgang Hein; Daniela García Sánchez; Lars Holstenkamp

    2013-01-01

    El desarrollo de la gobernanza global de las energías renovables comparte similitudes y diferencias con otros sectores de la gobernanza global. La proliferación de organizaciones en el sector resalta el importante compromiso de varios actores con el fomento de energías renovables y, por otro lado, produce problemas de coordinación para alcanzar un efecto óptimo e influir sobre el avance de las energías renovables, particularmente en países en desarrollo.

  18. RENOVE: an organization net for the third sector promoting the development of the renewable sources in Brazil; RENOVE: uma rede de organizacoes do terceiro setor promovendo o desenvolvimento das fontes renovaveis no Brasil

    Energy Technology Data Exchange (ETDEWEB)

    Ribeiro, Claudio Moises; Souza, Aurelio Andrade de [Winrock International Brasil, Salvador, BA (Brazil)]. E-mail: cribeiro@winrock.org.br; Rosa, Fabio Luis de Oliveira [RENOVE - Rede Nacional das Organizacoes da Sociedade Civil para as Energias Renovaveis, Porto Alegre RS (Brazil). Secretaria Executiva]. E-mail: fabrosa@plug-in.com.br

    2002-07-01

    The National Network of Civil Society Organizations for Renewable Energy RENOVE was founded in Brazil on June 17th, 2000, to promote the use and application of renewable energy in production and integrated activities, especially in isolated rural areas, environmental protection areas and their surroundings. The network is formed of sixteen founding members. It promotes integration activities among the members, and is currently preparing to participate in the process of universalization of electricity services in Brazil. RENOVE is now implementing its Executive Secretary to optimize and carry out its actions. Cooperation between members has already lead to joint renewable energy application projects and training initiatives besides declarations in support of the development of a national renewable energy policy. (author)

  19. Plantar pressure distribution of ostrich during locomotion on loose sand and solid ground

    Directory of Open Access Journals (Sweden)

    Rui Zhang

    2017-07-01

    Full Text Available Background The ostrich is a cursorial bird with extraordinary speed and endurance, especially in the desert, and thus is an ideal large-scale animal model for mechanic study of locomotion on granular substrate. Methods The plantar pressure distributions of ostriches walking/running on loose sand/solid ground were recorded using a dynamic pressure plate. Results The center of pressure (COP on loose sand mostly originated from the middle of the 3rd toe, which differed from the J-shaped COP trajectory on solid ground. At mid-stance, a high-pressure region was observed in the middle of the 3rd toe on loose sand, but three high-pressure regions were found on solid ground. The gait mode significantly affected the peak pressures of the 3rd and 4th toes (p = 1.5 × 10−6 and 2.39 × 10−8, respectively, but not that of the claw (p = 0.041. The effects of substrate were similar to those of the gait mode. Discussion Ground reaction force trials of each functional part showed the 3rd toe bore more body loads and the 4th toe undertook less loads. The pressure distributions suggest balance maintenance on loose sand was provided by the 3rd and 4th toes and the angle between their length axes. On loose sand, the middle of the 3rd toe was the first to touch the sand with a smaller attack angle to maximize the ground reaction force, but on solid ground, the lateral part was the first to touch the ground to minimize the transient loading. At push-off, the ostrich used solidification properties of granular sand under the compression of the 3rd toe to generate sufficient traction.

  20. WIMS calculations for a model CAGR skip containing clusters and loose pins

    International Nuclear Information System (INIS)

    Halsall, M.J.

    1982-12-01

    Calculations using WIMSD4 and MONK5.3 assess the reactivity consequences of distributing loose fuel pins around a CAGR skip already loaded with 20 fuel clusters, indicated uncertainties in the accuracy of the WIMSD4 multicell option for establishing the worst distribution of loose pins. The present study was undertaken in an attempt to resolve this uncertainty by comparing WIMSD4 single cell and multicell calculations for a representative model problem with results derived from LWRWIMS using discrete ordinates transport theory TWOTRAN to give a more reliable estimate of inter-cell couplings. The study concludes that WIMSD4 is systematic in its treatment of single cells with loose pins added but that somewhat unpredictable discrepancies of the order of 1 per cent in k can arise in calculations of different arrangements of cell types in a multicell situation. This is, nevertheless, of comparable accuracy to the Monte Carlo calculations normally made for studies of this type and hence the relatively rapid WIMSD4 calculations should serve a useful function in deciding which situations to analyse in more detail. (U.K.)

  1. The role of interfacial layers in the enhanced thermal conductivity of nanofluids: A renovated Hamilton-Crosser model

    International Nuclear Information System (INIS)

    Yu, W; Choi, S.U.S.

    2004-01-01

    We previously developed a renovated Maxwell model for the effective thermal conductivity of nanofluids and determined that the solid/liquid interfacial layers play an important role in the enhanced thermal conductivity of nanofluids. However, this renovated Maxwell model is limited to suspensions with spherical particles. Here, we extend the Hamilton--Crosser model for suspensions of nonspherical particles to include the effect of a solid/liquid interface. The solid/liquid interface is described as a confocal ellipsoid with a solid particle. The new model for the three-phase suspensions is mathematically expressed in terms of the equivalent thermal conductivity and equivalent volume fraction of anisotropic complex ellipsoids, as well as an empirical shape factor. With a generalized empirical shape factor, the renovated Hamilton--Crosser model correctly predicts the magnitude of the thermal conductivity of nanotube-in-oil nanofluids. At present, this new model is not able to predict the nonlinear behavior of the nanofluid thermal conductivity

  2. Report on stakeholder interests

    DEFF Research Database (Denmark)

    Haavik, Trond; Aabrekk, Synnøve; Tommerup, Henrik M.

    This report focuses on the different actors in the marketplace which offer products or services connected to renovation of houses. Which abilities do the different actors have for contribution to establish a one stop shop which offers a holistic renovation concept? Also complementary businesses......-stop-shop should offer tailor made services for sustainable renovation of a single family house. This should include the building envelope, insulation, window, materials, heating and ventilation system, and even financing. The one-stop-shop should have the knowhow about competent firms who can offer the additional...

  3. The Regime Shift Associated with the 2004–2008 US Housing Market Bubble

    Science.gov (United States)

    Cheong, Siew Ann

    2016-01-01

    The Subprime Bubble preceding the Subprime Crisis of 2008 was fueled by risky lending practices, manifesting in the form of a large abrupt increase in the proportion of subprime mortgages issued in the US. This event also coincided with critical slowing down signals associated with instability, which served as evidence of a regime shift or phase transition in the US housing market. Here, we show that the US housing market underwent a regime shift between alternate stable states consistent with the observed critical slowing down signals. We modeled this regime shift on a universal transition path and validated the model by estimating when the bubble burst. Additionally, this model reveals loose monetary policy to be a plausible cause of the phase transition, implying that the bubble might have been deflatable by a timely tightening of monetary policy. PMID:27583633

  4. Gobernanza global y evolución de las energías renovables en el sur. Objetivos políticos y estructuras de gobernanza

    Directory of Open Access Journals (Sweden)

    Wolfgang Hein

    2013-10-01

    Full Text Available El desarrollo de la gobernanza global de las energías renovables comparte similitudes y diferencias con otros sectores de la gobernanza global. La proliferación de organizaciones en el sector resalta el importante compromiso de varios actores con el fomento de energías renovables y, por otro lado, produce problemas de coordinación para alcanzar un efecto óptimo e influir sobre el avance de las energías renovables, particularmente en países en desarrollo.

  5. Assessment of heavy metals in loose deposits in drinking water distribution system.

    Science.gov (United States)

    Liu, Quanli; Han, Weiqiang; Han, Bingjun; Shu, Min; Shi, Baoyou

    2018-06-09

    Heavy metal accumulation and potential releases from loose deposits in drinking water distribution system (DWDS) can have critical impacts on drinking water safety, but the associated risks have not been sufficiently evaluated. In this work, the potential biological toxicity of heavy metals in loose deposits was calculated based on consensus-based sediment quality guidelines, and the effects of some of the main water quality parameters, such as the pH and bicarbonate and phosphate content, on the release behaviors of pre-accumulated heavy metals were investigated. The results showed that heavy metals (Cu, As, Cr, Pb, and Cd) significantly accumulated in all the samples, but the contents of the heavy metals were multiple magnitudes lower than the Fe and Mn contents. The potential biotoxicity of As and Cu was relatively high, but the biotoxicity of Cd was negligible. The water quality can significantly influence the release of heavy metals from loose deposits. As the pH increased from 7.0 to 9.0, the release of As and Cr obviously increased. The release of As, Cu, Pb, and Cr also accelerated with the addition of phosphate (from 1 to 5 mg/L). In contrast to the trends for the pH and phosphate, variations in the bicarbonate content did not have a significant influence on the release of As and Cr. The release ratios of heavy metals in the samples were very low, and there was not a correlation between the release rate of the heavy metals in the loose deposits and their potential biotoxicity.

  6. On-line acoustic monitoring of EDF nuclear plants in operation and loose-part diagnosis

    International Nuclear Information System (INIS)

    Morel, J.L.; Puyal, C.

    1991-05-01

    In order to detect incipient failures in nuclear power plant components, EDF has now put into operation more than 50 loose-part monitoring systems, on its 900 MW and 1 300 MW units. This paper first reviews the experience gained on the 900 MW reactors in recent years. It then focuses on the 1 300 MW loose part monitoring system (IDEAL) and to the tools developed for the diagnosis off site within a specific Expertise Laboratory at the Research and Development Division. New studies have been undertaken within the Monitoring and Aid to Diagnosis Station (PSAD) in order to extend the capabilities of loose part diagnosis on site. The new tools here presented integrate the recent progress in acquisition technology (SMART system) and in artificial intelligence (MIGRE expert system)

  7. PENCITRAAN AMERICAN NIGHTMARE MELALUI PENGGUNAAN ARCHETYPEDAN LOOSE SENTENCE STRUCTUREDALAM “THE GREAT GATSBY” KARYA F. SCOTT. FIZGERALD

    Directory of Open Access Journals (Sweden)

    Tintin Susilowati

    2014-12-01

    Full Text Available Penelitian ini adalah penelitian stilistika yang mengkaji tentang penggunaan archetype dan loose sentence structure dalam membangun kesan mental pembaca tentang American Nightmare. Melalui penelitian ini, peneliti peneliti menggali pola-pola penggunaan archetype, loose sentence structure, serta konsep mental pembaca dalam memahami bacaan.Tujuan penelitian ini adalah untuk mengetahui efektifitas gaya penulisan Fizgerald dengan menggunakan ornamen berupa archetype, loose sentence structure guna membangun kesan mental pembaca tentang America Nightmare. Pendekatan penelitian ini adalah deskriptive kualitatif sedangkan desainnya adalah library research. Data yang digunakan adalah data primer berupa kutipankutipan yang dicari dari novel, selain itu juga data sekunder berupa referensireferensi pendukung. Peneliti juga menggunakan coding dalam proses koleksi data. Teknik ini digunakan untuk membantu peneliti dalam mengklasifikasikan data. Lebih lanjut, penelitian ini merupakan penelitian dokumentasi maka dalam analisis peneliti menggunakan pendekatan content analysis selain itu interactive analysis juga digunakan peneliti dalam tahap analisis data. Dalam penelitian ini diperoleh data sebagai berikut, 1.ditemukan data tentang penggunaan archetype sejumlah 851 data/ 70.79%; 2. ditemukan data tentang penggunaan loose sentence structure sejumlah 351 data/ 29.20 %; 3. ditemukan data tentang penggunaan archetype dan loose sentence structure secara bersamaan sejumlah 1202 data/ 100%. Sedangkan kesimpulan dari penelitian ini adalah:penggunaan kedua ornamen khususnya berupa archetype didukung juga oleh penggunaan loose sentence structure membuat kontek dari sebuah teks mudah dipahami, Kedua ornamen tersebut meminimalis kesulitan pembaca dalam berinteraksi dengan teks.

  8. Development of a method for holistic energy renovation

    DEFF Research Database (Denmark)

    Morelli, Martin

    recovery. The long-term performance of the renovation may be reduced due to mould growth behind the interior insulation or decay of the wooden beams. The energy saving potential in two multi-family buildings was investigated by parameter studies of existing energy saving measures for both the building....... Measurements of temperature and relative humidity showed that conditions for mould growth were present. However, no signs of mould growth were documented at dismantling of the interior insulation. A method was developed for the design of energy saving measures based on both Failure Mode and Effect Analysis...

  9. Disseny d'una microxarxa amb generació renovable

    OpenAIRE

    Durich Serra, Ruben

    2016-01-01

    El present projecte pretén abordar l’estudi dels costs de generació d’energia elèctrica renovable de la tecnologia solar-fotovoltaica per tal de formar part del disseny d’una microxarxa de generació d’energia elèctrica. Durant la realització del projecte s’ha realitzat una breu introducció a les microxarxes de distribució d’energia elèctrica i als seus reptes. Per estudiar el cost de generació d’energia fotovoltaica s’ha utilitzat la metodologia del Levelized Cost of Energy ...

  10. Spontaneous resolution of posterior ankle joint loose bodies after total ankle replacement: A case report.

    Science.gov (United States)

    Lee, Raymond P; Cheng, Sally H S

    2017-06-01

    Late stage ankle osteoarthritis often presents with debilitating pain. It is common to find osteophytes and loose body formation around the joint. Total ankle arthroplasty can preserve joint mobility and pain relieve for such patient. However, when trying to remove the osteophytes and loose bodies at the posterior ankle joint, there is risk of damaging posterior structures such as the neurovascular bundle during the procedure. We are presenting a case where the posterior loose bodies remained untouched during the operation, and patient showed spontaneous resolution of the lesions with time. Patient enjoyed good function outcome after the surgery. Copyright © 2016 European Foot and Ankle Society. Published by Elsevier Ltd. All rights reserved.

  11. Health Benefits of Green Public Housing: Associations With Asthma Morbidity and Building-Related Symptoms.

    Science.gov (United States)

    Colton, Meryl D; Laurent, Jose Guillermo Cedeno; MacNaughton, Piers; Kane, John; Bennett-Fripp, Mae; Spengler, John; Adamkiewicz, Gary

    2015-12-01

    We examined associations of several health outcomes with green and conventional low-income housing, where the prevalence of morbidities and environmental pollutants is elevated. We used questionnaires and a visual inspection to compare sick building syndrome (SBS) symptoms and asthma-related morbidity among residents in multifamily units in Boston, Massachusetts, between March 2012 and May 2013. Follow-up was approximately 1 year later. Adults living in green units reported 1.35 (95% confidence interval [CI] = 0.66, 2.05) fewer SBS symptoms than those living in conventional (control) homes (P green homes experienced substantially lower risk of asthma symptoms (odds ratio [OR] = 0.34; 95% CI = 0.12, 1.00), asthma attacks (OR = 0.31; 95% CI = 0.11, 0.88), hospital visits (OR = 0.24; 95% CI = 0.06, 0.88), and asthma-related school absences (OR = 0.21; 95% CI = 0.06, 0.74) than children living in conventional public housing. Participants living in green homes had improved health outcomes, which remained consistent over the study period. Green housing may provide a significant value in resource-poor settings where green construction or renovation could simultaneously reduce harmful indoor exposures, promote resident health, and reduce operational costs.

  12. Markov chain-based mass estimation method for loose part monitoring system and its performance

    Directory of Open Access Journals (Sweden)

    Sung-Hwan Shin

    2017-10-01

    Full Text Available A loose part monitoring system is used to identify unexpected loose parts in a nuclear reactor vessel or steam generator. It is still necessary for the mass estimation of loose parts, one function of a loose part monitoring system, to develop a new method due to the high estimation error of conventional methods such as Hertz's impact theory and the frequency ratio method. The purpose of this study is to propose a mass estimation method using a Markov decision process and compare its performance with a method using an artificial neural network model proposed in a previous study. First, how to extract feature vectors using discrete cosine transform was explained. Second, Markov chains were designed with codebooks obtained from the feature vector. A 1/8-scaled mockup of the reactor vessel for OPR1000 was employed, and all used signals were obtained by impacting its surface with several solid spherical masses. Next, the performance of mass estimation by the proposed Markov model was compared with that of the artificial neural network model. Finally, it was investigated that the proposed Markov model had matching error below 20% in mass estimation. That was a similar performance to the method using an artificial neural network model and considerably improved in comparison with the conventional methods.

  13. Adoption of innovative energy systems in social housing: Lessons from eight large-scale renovation projects in The Netherlands

    NARCIS (Netherlands)

    Hoppe, Thomas

    2012-01-01

    Thanks to new insights on the impacts that dwellings have throughout their life cycles, there has been increased attention to retrofitting innovative energy systems (IES) in existing housing. This paper uses an explorative case study design to gain more knowledge about the governance aspects of this

  14. IMPLANTACIÓN DE ENERGIAS RENOVABLES Y ESTIMACIÓN DE LA HUELLA DE CARBONO EN EL MUNICIPIO DE BLANCA (MURCIA

    Directory of Open Access Journals (Sweden)

    José Molina Ruiz

    2012-01-01

    Full Text Available La introducción del concepto de sostenibilidad en el mercado energético implica la potenciación de las energías renovables activando políticas que fomenten su implantación. El éxito de estas políticas se plasmará en el incremento de participación de las energías renovables en el mix energético, en la reducción de emisiones de CO2 y en el cumplimiento de los compromisos internacionales. Este trabajo analiza el grado de implantación de las energías renovables en un municipio de la Región de Murcia (Blanca, valorando la incidencia de la legislación sectorial energética y estimando la huella de carbono derivada del consumo de energía eléctrica.

  15. A District Approach to Building Renovation for the Integral Energy Redevelopment of Existing Residential Areas

    Directory of Open Access Journals (Sweden)

    Mira Conci

    2017-05-01

    Full Text Available Building energy renovation quotas are not currently being met due to unfavorable conditions such as complex building regulations, limited investment incentives, historical preservation priorities, and technical limitations. The traditional strategy has been to incrementally lower the energy consumption of the building stock, instead of raising the efficiency of the energy supply through a broader use of renewable sources. This strategy requires an integral redefinition of the approach to energy building renovations. The joint project SWIVT elaborates on a district redevelopment strategy that combines a reduction in the energy demand of existing buildings and their physical interconnection within a local micro-grid and heating network. The district is equipped with energy generation and distribution technologies as well as hybrid thermal and electrical energy storage systems, steered by an optimizing energy management controller. This strategy is explored through three scenarios designed for an existing residential area in Darmstadt, Germany, and benchmarked against measured data. Presented findings show that a total primary energy balance at least 30% lower than that of a standard building renovation can be achieved by a cluster of buildings with different thermal qualities and connected energy generation, conversion, and storage systems, with only minimal physical intervention to existing buildings.

  16. Composition of heavy metals and airborne fibers in the indoor environment of a building during renovation.

    Science.gov (United States)

    Latif, Mohd Talib; Baharudin, Nor Hafizah; Velayutham, Puvaneswary; Awang, Normah; Hamdan, Harimah; Mohamad, Ruqyyah; Mokhtar, Mazlin B

    2011-10-01

    The renovation of a building will certainly affect the quality of air in the vicinity of where associated activities were undertaken, this includes the quality of air inside the building. Indoor air pollutants such as particulate matter, heavy metals, and fine fibers are likely to be emitted during renovation work. This study was conducted to determine the concentration of heavy metals, asbestos and suspended particulates in the Biology Building, at the Universiti Kebangsaan, Malaysia (UKM). Renovation activities were carried out widely in the laboratories which were located in this building. A low-volume sampler was used to collect suspended particulate matter of a diameter size less than 10 μm (PM₁₀) and an air sampling pump, fitted with a cellulose ester membrane filter, were used for asbestos sampling. Dust was collected using a small brush and scope. The concentration of heavy metals was determined through the use of inductively coupled plasma-mass spectroscopy and the fibers were counted through a phase contrast microscope. The concentrations of PM₁₀ recorded in the building during renovation action (ranging from 166 to 542 μg m⁻³) were higher than the value set by the Department of Safety and Health for respirable dust (150 μg m⁻³). Additionally, they were higher than the value of PM₁₀ recorded in indoor environments from other studies. The composition of heavy metals in PM₁₀ and indoor dust were found to be dominated by Zn and results also showed that the concentration of heavy metals in indoor dust and PM₁₀ in this study was higher than levels recorded in other similar studies. The asbestos concentration was 0.0038 ± 0.0011 fibers/cc. This was lower than the value set by the Malaysian Department of Occupational, Safety and Health (DOSH) regulations of 0.1 fibers/cc, but higher than the background value usually recorded in indoor environments. This study strongly suggests that renovation issues need to be considered seriously

  17. A BIM-based system for demolition and renovation waste estimation and planning

    International Nuclear Information System (INIS)

    Cheng, Jack C.P.; Ma, Lauren Y.H.

    2013-01-01

    Highlights: ► We developed a waste estimation system leveraging the BIM technology. ► The system can calculate waste disposal charging fee and pick-up truck demand. ► We presented an example scenario demonstrating this system. ► Automatic, time-saving and wide applicability are the features of the system. - Abstract: Due to the rising worldwide awareness of green environment, both government and contractors have to consider effective construction and demolition (C and D) waste management practices. The last two decades have witnessed the growing importance of demolition and renovation (D and R) works and the growing amount of D and R waste disposed to landfills every day, especially in developed cities like Hong Kong. Quantitative waste prediction is crucial for waste management. It can enable contractors to pinpoint critical waste generation processes and to plan waste control strategies. In addition, waste estimation could also facilitate some government waste management policies, such as the waste disposal charging scheme in Hong Kong. Currently, tools that can accurately and conveniently estimate the amount of waste from construction, renovation, and demolition projects are lacking. In the light of this research gap, this paper presents a building information modeling (BIM) based system that we have developed for estimation and planning of D and R waste. BIM allows multi-disciplinary information to be superimposed within one digital building model. Our system can extract material and volume information through the BIM model and integrate the information for detailed waste estimation and planning. Waste recycling and reuse are also considered in our system. Extracted material information can be provided to recyclers before demolition or renovation to make recycling stage more cooperative and more efficient. Pick-up truck requirements and waste disposal charging fee for different waste facilities will also be predicted through our system. The results

  18. A BIM-based system for demolition and renovation waste estimation and planning

    Energy Technology Data Exchange (ETDEWEB)

    Cheng, Jack C.P., E-mail: cejcheng@ust.hk [Department of Civil and Environmental Engineering, The Hong Kong University of Science and Technology (Hong Kong); Ma, Lauren Y.H., E-mail: yingzi@ust.hk [Department of Civil and Environmental Engineering, The Hong Kong University of Science and Technology (Hong Kong)

    2013-06-15

    Highlights: ► We developed a waste estimation system leveraging the BIM technology. ► The system can calculate waste disposal charging fee and pick-up truck demand. ► We presented an example scenario demonstrating this system. ► Automatic, time-saving and wide applicability are the features of the system. - Abstract: Due to the rising worldwide awareness of green environment, both government and contractors have to consider effective construction and demolition (C and D) waste management practices. The last two decades have witnessed the growing importance of demolition and renovation (D and R) works and the growing amount of D and R waste disposed to landfills every day, especially in developed cities like Hong Kong. Quantitative waste prediction is crucial for waste management. It can enable contractors to pinpoint critical waste generation processes and to plan waste control strategies. In addition, waste estimation could also facilitate some government waste management policies, such as the waste disposal charging scheme in Hong Kong. Currently, tools that can accurately and conveniently estimate the amount of waste from construction, renovation, and demolition projects are lacking. In the light of this research gap, this paper presents a building information modeling (BIM) based system that we have developed for estimation and planning of D and R waste. BIM allows multi-disciplinary information to be superimposed within one digital building model. Our system can extract material and volume information through the BIM model and integrate the information for detailed waste estimation and planning. Waste recycling and reuse are also considered in our system. Extracted material information can be provided to recyclers before demolition or renovation to make recycling stage more cooperative and more efficient. Pick-up truck requirements and waste disposal charging fee for different waste facilities will also be predicted through our system. The results

  19. Realizing Loose Communication with Tangible Avatar to Facilitate Recipient’s Imagination

    Directory of Open Access Journals (Sweden)

    Shinichi Endo

    2018-02-01

    Full Text Available Social network services (SNSs allow users to share their daily experiences and significant life events with family, friends, and colleagues. However, excessive use of SNSs or dependence upon them can cause a problem known as “SNS fatigue” that is associated with feelings of anxiety and loneliness. In other words, the tighter and stronger the social bonds are through SNSs, the more users feel anxiety and loneliness. We propose a method for providing users with a sense of security and connectedness with others by facilitating loose communication. Loose communication is defined by the presentation of abstract information and passive (one-way communication. By focusing on the physicality and anthropomorphic characteristics of tangible avatars, we investigated a communication support system, Palco, that displays three types of contextual information with respect to the communication partner—emotional state, activity, and location—in a loose manner. Our approach contrasts with typical SNS interaction methods characterized by tight communication with interactivity and concrete information. This paper describes the design and implementation of Palco, as well as its usefulness as a communication tool. The emotional effects on the users are evaluated through a user study with 10 participants over four days. The results imply that Palco can effectively communicate the context of the communication partner, and provide a sense of security.

  20. Financing New Technologies, Equipment/Furniture Replacement, and Building Renovation: A Survey Report.

    Science.gov (United States)

    Shirk, Gary M.

    1984-01-01

    Reports results of survey of methods used by 77 North American academic and public libraries to finance implementation of new technologies, replace equipment and furniture, and renovate buildings. Financing methods used, frequency of use, choice, and range of methods are discussed. Eight references and list of survey participants are appended.…

  1. Analysis and Monitoring of Energy Consumption and Indoor Climate in a School Before and After Deep Energy Renovation

    DEFF Research Database (Denmark)

    Rose, Jørgen; Thomsen, Kirsten Engelund; Bergsøe, Niels Christian

    2015-01-01

    kindergartens/institutions -- that will undergo deep energy renovation over the next fewyears.The seven buildings are being energy-renovated and monitored with support from the European Union- CONCERTO initiative as part of the project titled Cost-Effective Low-Energy Advanced Sustainable Solutions -- Class1...... ventilation systems with heat recovery, low-energy lighting, water-saving measures, improved insulation of piping, and improved control using building energy management systems. This paper presents preliminary results of the analysis and monitoring of energy consumption and indoor climate in one public school...

  2. Giant Peritoneal Loose Bodies | van Zyl | SA Journal of Radiology

    African Journals Online (AJOL)

    Giant peritoneal loose bodies are rare lesions, originating from auto-amputated appendices epiploicae. They may cause urinary or gastrointestinal obstruction and, should the radiologist not be familiar with the entity, can potentially be confused with malignant or parasitic lesions. Familiarity with their characteristic computed ...

  3. Análisis económico y financiero de las empresas cotizadas pertenecientes al sector de las energías renovables

    OpenAIRE

    Rodríguez Regueiro, Luis Manuel

    2012-01-01

    Situados en este contexto, el objetivo de este Trabajo Fin de Master es ofrecer una visión del sector de las energías renovables, mediante el estudio de sus características y su funcionamiento, y analizar la situación económica y financiera que presentan las empresas cotizadas pertenecientes al sector de las energías renovables.

  4. Setting of loose-fill insulation materials in walls; Saetningsfri indblaesning af loesfyldsisolering i vaegge

    Energy Technology Data Exchange (ETDEWEB)

    Rasmussen, T.V.

    2001-07-01

    The report describes material behaviour, which significantly influences the settling of loose-fill insulation materials. The specific application presented here is loose-fill insulation material injected in walls as thermal insulation. The physical formulation of the issue to be discussed is that the mass is kept in position in the cavity by frictional forces, which counteracts the settling but complicates injection. The purpose of this study is to investigate whether there is a possibility that decreased friction will be able to release settling. Cellulose loose-fill material injected in a 0.1 m thick and 1 m wide gypsum wall with a minimum density of 48 kg/m3 was found not to settle if kept at a constant relative humidity, RH 50 %. A minimum density of 53 kg/m3 is necessary if the thickness of the wall is increased from 0.1 m to 0.3 m. If changing the constant environment from RH 50 % to RH 80 % a minimum density of 63 kg/m3 is necessary. Furthermore, results so far show that cellulose loose-fill material spread on the attic floor will have a density after settling of 48 kg /M3 for a constant RH 50 %, corresponding to 43 kg/m3 dry material. The results were found by using a model and tests. (au)

  5. Loose anagen hair syndrome associated with colobomas and dysmorphic features

    DEFF Research Database (Denmark)

    Hansen, Lars Kjaersgård; Brandrup, Flemming; Clemmensen, Ole

    2004-01-01

    Loose anagen hair syndrome is an uncommon congenital disorder. It may occur in association with other syndromes and dysmorphic features. We report a girl who fulfilled the diagnostic criteria for this syndrome as proposed by Tosti (Arch Dermatol 2002, 138: 521-522). She also had several other...

  6. Energy and comfort performance evaluation after renovation of an office building

    Energy Technology Data Exchange (ETDEWEB)

    Renzi, V.; Burgun, F. [Inst. National de l' Energie Solaire, Le Bourget du Lac (France)

    2009-07-01

    Buildings constitute 42.5 per cent of the energy consumption in Europe. As such, the building sector represents a high potential for innovation in terms of reducing global energy consumption. Since existing buildings represent a large part of the built environment, refurbishment is an important issue to consider. However, efficient processes of renovation must be well defined. France's National Institute of Solar Energy has developed a methodology to reduce consumption of primary energy use and decrease greenhouse gas emissions in the built environment, while increasing user comfort. The methodology places much emphasis on the health and comfort of occupants from the very beginning of the process. The methodology was developed to make the building renovation process more efficient by elaborating generic guidelines and tools. In this study, an office building from the 1970s was refurbished and monitored for both energy performance and comfort. The objective was to better understand the technological and psychosocial aspects involved in refurbishing an old building. Measurements were compared with the perception of the occupants. The impacts of human interaction on the building behaviour was also evaluated. 6 refs., 1 tab., 4 figs.

  7. Evaluation of Water Quality Renovation by Advanced Soil-Based Wastewater Treatment Systems

    Science.gov (United States)

    Cooper, J.; Loomis, G.; Kalen, D.; Boving, T.; Morales, I.; DeLuca, J.; Amador, J.

    2013-12-01

    25% of US households utilize onsite wastewater treatment systems (OWTS) for wastewater management. Advanced technologies were designed to overcome the inadequate wastewater treatment by conventional OWTS in critical shallow water table areas, such as coastal zones, in order to protect ground water quality. In addition to the septic tank and soil drainfield that comprise a conventional OWTS, advanced systems claim improved water renovation with the addition of sand filtration, timed dosing controls, and shallow placement of the infiltrative zone. We determined water quality renovation functions under current water table and temperature conditions, in anticipation of an experiment to measure OWTS response to a climate change scenario of 30-cm increase in water table elevation and 4C temperature increase. Replicate (n=3) intact soil mesocosms were used to evaluate the effectiveness of drainfields with a conventional wastewater delivery (pipe-and-stone) compared to two types of pressurized, shallow narrow drainfield. Results under steady state conditions indicate complete removal of fecal coliform bacteria, phosphorus and BOD by all soil-based systems. By contrast, removal of total nitrogen inputs was 16% in conventional and 11% for both advanced drainfields. Effluent waters maintained a steady state pH between 3.2 - 3.7 for all technologies. Average DO readings were 2.9mg/L for conventional drainfield effluent and 4.6mg/L for advanced, showing the expected oxygen uptake with shallow placement of the infiltrative zone. The conventional OWTS is outperforming the advanced with respect to nitrogen removal, but renovating wastewater equivalently for all other contaminants of concern. The results of this study are expected to facilitate development of future OWTS regulation and planning guidelines, particularly in coastal zones and in the face of a changing climate.

  8. Renovating Alzheimer's: "Constructive" Reflections on the New Clinical and Research Diagnostic Guidelines

    Science.gov (United States)

    George, Daniel R.; Qualls, Sara H.; Camp, Cameron J.; Whitehouse, Peter J.

    2013-01-01

    The development of disease concepts for conditions such as Alzheimer's disease (AD) is an ongoing social process that evolves over time. The biomedical paradigm about AD that has informed our culture's understanding of brain aging for the past several decades is currently undergoing a major and timely renovation in the early 21st century. This…

  9. Performance Evaluation and Improvement of a Newly-Renovated Danish School Building (Retro-commissioning)

    DEFF Research Database (Denmark)

    Liu, Li; Georgieva, Viktoriya Vasileva; Zabusova, Diana

    2017-01-01

    In this study, we analyse and evaluate the energy performance of a Danish school building 4 years after its renovation. The structure of the following paper follows four phases, which include Planning, Investigation, Implementation and Hand-off. In the Planning phase, the objectives of the retro...

  10. Means for the regulation of renewable energies; Instrumentos de regulacion para renovables

    Energy Technology Data Exchange (ETDEWEB)

    Peraza, Alejandro [Comision Reguladora de Energia, Mexico (Mexico)

    2007-06-15

    It is basically described in this presentation, those means used by the Comision Reguladora de Energia (CRE) in order to control the distribution of the available renewable energies, as well as to show the modifications done to its contracts. Besides, there are described the most relevant information about the CRE's law. There are mentioned some of the changes done to some clauses of different contracts, among the contracts found here there can be: contract for the interconnection of renewable energies, contract for the interconnection for a small source of solar energy. [Spanish] En esta presentacion se describen primordialmente los instrumentos que la Comision Reguladora de Energia (CRE) utiliza con el fin de reglamentar la distribucion de las diversas energias renovables disponibles, asi como mostrar las modificaciones que se han realizado en sus contratos. Ademas, se describen los principales aspectos de la Ley de la CRE. Asimismo, se mencionan algunas de las modificaciones que se les ha hecho a diversos contratos: Contrato de interconexion de renovables, contrato de interconexion para fuente de energia solar en pequena escala.

  11. CONVERGENCE AS A RENOVATION/CONSERVATION TOOL FOR JOURNALISM IN GALICIA: STRATEGIES AND UNCERTAINTIES

    Directory of Open Access Journals (Sweden)

    Carlos Toural Bran

    2012-06-01

    Full Text Available This paper offers a theoretical reflection on the concept of convergence in the Autonomous Community of Galicia, in Spain. In this geographic area, marked by its respect for journalistic tradition (especially referring to the press and its inertia, it is possible to distinguish two different attitudes (actually conflicting with regard to the convergence phenomenon. Conservation strategies coexist, therefore, (focusing mainly on the business aspect of the convergent phenomenon with renovation strategies (creation of new spaces on the web, great commitment to the possibilities offered by new technologies and social networks. We are presenting an analytical study of the coexistence of these two interpretations of convergence (marketing and technological, respectively in the communication ecosystem of Galicia. We can recognize the beginning of a dialectic tension between the discourses of renovation and conservation which at present coexist in harmony. It is assumed that the information industry in Galicia will eventually choose the path that guarantees the survival of its media.

  12. Convergence as a renovation/conservation tool for journalism in Galicia: strategies and uncertainties

    Directory of Open Access Journals (Sweden)

    Xosé López García

    2012-06-01

    Full Text Available This paper offers a theoretical reflection on the concept of convergence in the Autonomous Community of Galicia, in Spain. In this geographic area, marked by its respect for journalistic tradition (especially referring to the press and its inertia, it is possible to distinguish two different attitudes (actually conflicting with regard to the convergence phenomenon. Conservation strategies coexist, therefore, (focusing mainly on the business aspect of the convergent phenomenon with renovation strategies (creation of new spaces on the web, great commitment to the possibilities offered by new technologies and social networks. We are presenting an analytical study of the coexistence of these two interpretations of convergence (marketing and technological, respectively in the communication ecosystem of Galicia. We can recognize the beginning of a dialectic tension between the discourses of renovation and conservation which at present coexist in harmony. It is assumed that the information industry in Galicia will eventually choose the path that guarantees the survival of its media.

  13. Renewable energy and technological development; Energia renovable y desarrollo tecnologico

    Energy Technology Data Exchange (ETDEWEB)

    Covarrubias Ramos, Rogelio [Fideicomiso para el ahorro de energia, (Mexico)

    2007-06-15

    In this presentation is widely described the work carried out by the Trust Fund for Electrical Energy Savings (FIDE) with reference to renewable energy foster. In the first part, it is found the FIDE's mission, which is focused on achieving the efficient use of the energy. Then, there are quiet briefly described the processes -carried out by the FIDE- in favour of the groundbreaking technology that achieves to decrease the energy squandering. In addition, there are mentioned different means boosting the energy savings. Then, there are described the issues the energy system should change in order to improve the actual situation of many Mexicans. There are briefly mentioned not only the environmental but also the social benefits of the use of renewable energy; besides, there are given the necessary elements in order to make it possible. Then, there are explained why the use of renewable energy would be profitable. Finally, it is described the methodology that should be followed in case it is wanted to find sponsors up to 100% for a project related to improvement of the energy production. [Spanish] Esta presentacion describe ampliamente la labor que realiza el Fideicomiso para el ahorro de energia (FIDE) en relacion con el fomento de la energia renovable, asi como el desarrollo de tecnologias que refuercen el uso de este tipo de energia. En la primera parte, se encuentra la mision del FIDE, que se enfoca en lograr que el uso de la energia sea apropiado. Enseguida, de forma breve se describen los procesos que realiza el FIDE en favor de la tecnologia innovadora que haga decrecer el dispendio de energia. Luego, se explican las aspectos endebles del sistema energetico de Mexico. Se describen escuetamente los beneficios, no solo ambientales sino tambien sociales, del uso de energia renovable; ademas, se mencionan los elementos necesarios para que esto pueda lograrse. Mas adelante, se dan las razones por las que para Mexico seria rentable el uso de energia renovable

  14. Renewable energy and technological development; Energia renovable y desarrollo tecnologico

    Energy Technology Data Exchange (ETDEWEB)

    Covarrubias Ramos, Rogelio [Fideicomiso para el ahorro de energia, (Mexico)

    2007-06-15

    In this presentation is widely described the work carried out by the Trust Fund for Electrical Energy Savings (FIDE) with reference to renewable energy foster. In the first part, it is found the FIDE's mission, which is focused on achieving the efficient use of the energy. Then, there are quiet briefly described the processes -carried out by the FIDE- in favour of the groundbreaking technology that achieves to decrease the energy squandering. In addition, there are mentioned different means boosting the energy savings. Then, there are described the issues the energy system should change in order to improve the actual situation of many Mexicans. There are briefly mentioned not only the environmental but also the social benefits of the use of renewable energy; besides, there are given the necessary elements in order to make it possible. Then, there are explained why the use of renewable energy would be profitable. Finally, it is described the methodology that should be followed in case it is wanted to find sponsors up to 100% for a project related to improvement of the energy production. [Spanish] Esta presentacion describe ampliamente la labor que realiza el Fideicomiso para el ahorro de energia (FIDE) en relacion con el fomento de la energia renovable, asi como el desarrollo de tecnologias que refuercen el uso de este tipo de energia. En la primera parte, se encuentra la mision del FIDE, que se enfoca en lograr que el uso de la energia sea apropiado. Enseguida, de forma breve se describen los procesos que realiza el FIDE en favor de la tecnologia innovadora que haga decrecer el dispendio de energia. Luego, se explican las aspectos endebles del sistema energetico de Mexico. Se describen escuetamente los beneficios, no solo ambientales sino tambien sociales, del uso de energia renovable; ademas, se mencionan los elementos necesarios para que esto pueda lograrse. Mas adelante, se dan las razones por las que para Mexico seria rentable el uso de energia renovable

  15. Prerequisites for Successful Strategic Partnerships for Sustainable Building Renovation

    DEFF Research Database (Denmark)

    Jensen, Per Anker; Johansen, Jakob Berg; Thuesen, Christian

    2017-01-01

    and analysis of strategic partnerships models as well as typical processes used in building renovation. Experiences from development of new strategic partnerships have particularly been found in the UK and Sweden. Based on two workshops with practitioners representing the whole value chain in the construction...... particularly in terms of reducing energy consumption and use of resources and increase productivity. However, until now we have only had a limited number of such partnerships implemented and the few examples that do exist, mostly concern the construction of new buildings. The paper is based on an investigation...

  16. " La chatarra ferrosa, ¿desperdicio industrial o recurso renovable?"

    OpenAIRE

    Valadez Valenzuela, Jaime arturo

    2011-01-01

    Conforme el avance del tiempo, y el deterioro o consumismo de los recursos renovables por el paso desenfrenado de nuestra humanidad, enfrentando el reto de subsistencia en todos los ámbitos, se nos esta presentando la necesidad de aprovechar todo aquello que de una u otra forma pueda ser reutilizado, generando inclusive la forma de otorgar "trabajo", o una manera de crear fuentes económicas para toda una gama de personas, que de tal manera que dedicándose tanto a la recolección de lo que par...

  17. A VAX-FPS Loosely-Coupled Array of Processors

    International Nuclear Information System (INIS)

    Grosdidier, G.

    1987-03-01

    The main features of a VAX-FPS Loosely-Coupled Array of Processors (LCAP) set-up and the implementation of a High Energy Physics tracking program for off-line purposes will be described. This LCAP consists of a VAX 11/750 host and two FPS 64 bit attached processors. Before analyzing the performances of this LCAP, its characteristics will be outlined, especially from a user's point of vue, and will be briefly compared to those of the IBM-FPS LCAP

  18. Tourist Quarter “Chinese-Baroque” of Dao Way District in Harbin City: experience, problems and perspectives of renovation.

    Directory of Open Access Journals (Sweden)

    Levoshko Svetlana

    2016-01-01

    Full Text Available This article analyzes results of an unique experience of the Dao Wai historic district renovation project in Harbin of the 2010th. It includes an interpretation of the stylistic features of the Dao Wai building. Also, there was made a presumptive conclusion about the origins of the “Chinese Baroque”, which is now famous Dao Wai, combining European order architecture and far Eastern decorative tradition. Presumptive conclusion was based on the construction area observing in 2011-2016 and on the Chinese sources. As a result of renovation, there was formed a new public space with high tourism potential. Social value and status of the Dao Wai has significantly grown. The significant cost increase of real estate and provided services is an essential consequence of the gentrification method. There are were noted increased problems of the native people forced to move from the center to the outskirts of the city. Also, this article analyzes the current stage of the second phase design of Dao Wai renovation project and the perspectives for its implementation.

  19. Results from Tight and Loose Coupled Multiphysics in Nuclear Fuels Performance Simulations using BISON

    Energy Technology Data Exchange (ETDEWEB)

    S. R. Novascone; B. W. Spencer; D. Andrs; R. L. Williamson; J. D. Hales; D. M. Perez

    2013-05-01

    The behavior of nuclear fuel in the reactor environment is affected by multiple physics, most notably heat conduction and solid mechanics, which can have a strong influence on each other. To provide credible solutions, a fuel performance simulation code must have the ability to obtain solutions for each of the physics, including coupling between them. Solution strategies for solving systems of coupled equations can be categorized as loosely-coupled, where the individual physics are solved separately, keeping the solutions for the other physics fixed at each iteration, or tightly coupled, where the nonlinear solver simultaneously drives down the residual for each physics, taking into account the coupling between the physics in each nonlinear iteration. In this paper, we compare the performance of loosely and tightly coupled solution algorithms for thermomechanical problems involving coupled thermal and mechanical contact, which is a primary source of interdependence between thermal and mechanical solutions in fuel performance models. The results indicate that loosely-coupled simulations require significantly more nonlinear iterations, and may lead to convergence trouble when the thermal conductivity of the gap is too small. We also apply the tightly coupled solution strategy to a nuclear fuel simulation of an experiment in a test reactor. Studying the results from these simulations indicates that perhaps convergence for either approach may be problem dependent, i.e., there may be problems for which a loose coupled approach converges, where tightly coupled won’t converge and vice versa.

  20. Results from tight and loose coupled multiphysics in nuclear fuels performance simulations using BISON

    International Nuclear Information System (INIS)

    Novascone, S. R.; Spencer, B. W.; Andrs, D.; Williamson, R. L.; Hales, J. D.; Perez, D. M.

    2013-01-01

    The behavior of nuclear fuel in the reactor environment is affected by multiple physics, most notably heat conduction and solid mechanics, which can have a strong influence on each other. To provide credible solutions, a fuel performance simulation code must have the ability to obtain solutions for each of the physics, including coupling between them. Solution strategies for solving systems of coupled equations can be categorized as loosely-coupled, where the individual physics are solved separately, keeping the solutions for the other physics fixed at each iteration, or tightly coupled, where the nonlinear solver simultaneously drives down the residual for each physics, taking into account the coupling between the physics in each nonlinear iteration. In this paper, we compare the performance of loosely and tightly coupled solution algorithms for thermomechanical problems involving coupled thermal and mechanical contact, which is a primary source of interdependence between thermal and mechanical solutions in fuel performance models. The results indicate that loosely-coupled simulations require significantly more nonlinear iterations, and may lead to convergence trouble when the thermal conductivity of the gap is too small. We also apply the tightly coupled solution strategy to a nuclear fuel simulation of an experiment in a test reactor. Studying the results from these simulations indicates that perhaps convergence for either approach may be problem dependent, i.e., there may be problems for which a loose coupled approach converges, where tightly coupled won't converge and vice versa. (authors)

  1. Status report on the GANIL renovation program

    International Nuclear Information System (INIS)

    Loyer, F.

    1995-01-01

    Three years ago, a renovation program was initiated to ensure GANIL a lifetime of at least 15 years in order to allow an efficient use of the two radioactive ion beam facilities, SISSI which has been operational since last year and SPIRAL which will be in use in 98. The status of this program is reported which mainly concerns the control system, the RF systems (voltage and phase control devices), the vacuum system (control and pumping devices), the power supplies (interfaces, current sensors, and internal electronics), the beam instrumentation (electronics and local control devices) and the system which survey the accelerator access. The improvements of the accelerator ECR sources are also described and the first results to produce refractor metallic ion beams like uranium are mentioned. (author)

  2. TECHNIQUES FOR RECONSTRUCTION OF THE PRESERVED HOUSING STOCK

    Directory of Open Access Journals (Sweden)

    Kustikova Yuliya Olegovna

    2017-10-01

    over 2.5 million sq. m. In addition, a significant part of the housing stock needs major repair and reconstruction. In this regard, a priority when planning cities should be given to the renovation of buildings to create a safe and comfortable living environment. Subject: reconstruction of five-storey residential buildings of series 1-447 on the territory of Moscow region. Research objectives: development of volume-spatial techniques for reconstruction of five-storey residential buildings of series 1-447. Materials and methods: analysis of three most applicable options for reconstruction of buildings of the first mass series on the example of brick five-storey buildings of series 1-447. Results: for five-story brick residential buildings of series 1-447 we recommend volume-spatial reconstruction method with symmetric broadening of the building by 3 m and a superstructure up to 9 floors.

  3. 76 FR 47917 - Lead; Clearance and Clearance Testing Requirements for the Renovation, Repair, and Painting Program

    Science.gov (United States)

    2011-08-05

    ... available, e.g., Confidential Business Information (CBI) or other information whose disclosure is restricted... to window replacement to complete kitchen and bath renovations to building additions and everything...

  4. Applying Best Practices to Florida Local Government Retrofit Programs

    Energy Technology Data Exchange (ETDEWEB)

    McIlvaine, J. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Sutherland, K. [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2013-12-01

    In some communities, local government and non-profit entities have funds to purchase and renovate distressed, foreclosed homes for resale in the affordable housing market. Numerous opportunities to improve whole house energy efficiency are inherent in these comprehensive renovations. BA-PIRC worked together in a multi-year field study making recommendations in individual homes, meanwhile compiling improvement costs, projected energy savings, practical challenges, and labor force factors surrounding common energy-related renovation measures. The field study, Phase 1 of this research, resulted in a set of best practices appropriate to the current labor pool and market conditions in central Florida to achieve projected annual energy savings of 15-30% and higher. This report describes Phase 2 of the work where researchers worked with a local government partner to implement and refine the 'current best practices.' A simulation study was conducted to characterize savings potential under three sets of conditions representing varying replacement needs for energy-related equipment and envelope components. The three scenarios apply readily to the general remodeling industry as for renovation of foreclosed homes for the affordable housing market. Our new local government partner, the City of Melbourne, implemented the best practices in a community-scale renovation program that included ten homes in 2012.

  5. Applying Best Practices to Florida Local Government Retrofit Programs

    Energy Technology Data Exchange (ETDEWEB)

    McIlvaine, J. [Building America Partnership for Improved Residential Construction (BA-PIRC), Cocoa, FL (United States); Sutherland, K. [Building America Partnership for Improved Residential Construction (BA-PIRC), Cocoa, FL (United States)

    2013-12-01

    In some communities, local government and non-profit entities have funds to purchase and renovate distressed, foreclosed homes for resale in the affordable housing market. Numerous opportunities to improve whole house energy efficiency are inherent in these comprehensive renovations. BA-PIRC worked together in a multiyear field study making recommendations in individual homes, meanwhile compiling improvement costs, projected energy savings, practical challenges, and labor force factors surrounding common energy-related renovation measures. The field study, Phase 1 of this research, resulted in a set of best practices appropriate to the current labor pool and market conditions in central Florida to achieve projected annual energy savings of 15%-30% and higher. This report describes Phase 2 of the work where researchers worked with a local government partner to implement and refine the "current best practices". A simulation study was conducted to characterize savings potential under three sets of conditions representing varying replacement needs for energy-related equipment and envelope components. The three scenarios apply readily to the general remodeling industry as for renovation of foreclosed homes for the affordable housing market. The new local government partner, the City of Melbourne, implemented the best practices in a community-scale renovation program that included ten homes in 2012.

  6. Minoxidil 5% solution for topical treatment of loose anagen hair syndrome.

    Science.gov (United States)

    Chandran, Nisha S; Oranje, Arnold P

    2014-01-01

    A 2-year-old girl with a diagnosis of loose anagen hair syndrome was treated with a tapering regime of minoxidil 5% solution over 28 months, resulting in quick, significant clinical improvement with no adverse effects. © 2014 Wiley Periodicals, Inc.

  7. Efficient modernisation of a panel building - (We reduced a panel house's heat consumption to one fourth)

    Energy Technology Data Exchange (ETDEWEB)

    Zsebik, Albin; Czinege, Zoltan

    2010-09-15

    In an EU pilot project called 'SOLANOVA', a 42-apartment building, was renovated and converted to a low energy consumption building in Dunaujvaros, Hungary in year 2005. The energy consumption of the building in the last four heating seasons was less than a quarter of the baseline consumption before the renovation. This presentation introduces the building and its energy consumption before the renovation; shows the aim, preparation and main steps of the renovation; and takes a look at the building and its heat consumption after the renovation.

  8. The Influence of Slowly Varying Mass on Severity of Dynamics Nonlinearity of Bearing-Rotor Systems with Pedestal Looseness

    Directory of Open Access Journals (Sweden)

    Mian Jiang

    2018-01-01

    Full Text Available Nonlinearity measure is proposed to investigate the influence of slowly varying mass on severity of dynamics nonlinearity of bearing-rotor systems with pedestal looseness. A nonlinear mathematical model including the effect of slowly varying disk mass is developed for a bearing-rotor system with pedestal looseness. The varying of equivalent disk mass is described by a cosine function, and the amplitude coefficient is used as a control parameter. Then, nonlinearity measure is employed to quantify the severity of dynamics nonlinearity of bearing-rotor systems. With the increasing of looseness clearances, the curves that denote the trend of nonlinearity degree are plotted for each amplitude coefficient of mass varying. It can be concluded that larger amplitude coefficients of the disk mass varying will have more influence on the severity of dynamics nonlinearity and generation of chaotic behaviors in rotor systems with pedestal looseness.

  9. Molecular Identification of Bacteria from Aseptically Loose Implants

    Science.gov (United States)

    Kobayashi, Naomi; Procop, Gary W.; Krebs, Viktor; Kobayashi, Hideo

    2008-01-01

    Polymerase chain reaction (PCR) assays have been used to detect bacteria adherent to failed orthopaedic implants, but some PCR assays have had problems with probable false-positive results. We used a combination of a Staphylococcus species-specific PCR and a universal PCR followed by DNA sequencing to identify bacteria on implants retrieved from 52 patients (92 implants) at revision arthroplasty. We addressed two questions in this study: (1) Is this method able to show the existence of bacterial DNA on presumed aseptic loosed implants?; and (2) What proportion of presumed aseptic or culture-negative implants was positive for bacterial DNA by PCR? Fourteen implants (15%) were believed infected, whereas 74 implants (85%) were believed aseptic. Each implant was sonicated and the resulting solution was submitted for dual real-time PCR assay and culture. All implants believed aseptically loose were culture-negative, but nine of the 74 (12%) had bacterial DNA by PCR; two (2.7%) were PCR-positive and also showed histologic findings suggestive of infection. Uniquely developed PCR and bacterial sequencing assays showed bacterial DNA on 12% of implants removed for presumed aseptic loosening. Additional studies are needed to determine the clinical importance of bacterial DNA detected by PCR but not by conventional culture. Level of Evidence: Level III, diagnostic study. See the Guidelines for Authors for a complete description of levels of evidence. PMID:18438724

  10. [Effect of Transcutaneous Acupoint Electrical Stimulation on Hemodynamic Fluctuation Caused by Loosing Tourniquet in Elderly Patients Undergoing Knee Joint Replacement].

    Science.gov (United States)

    Liang, Han-Sheng; Feng, Yi

    2017-12-25

    To observe the effect of transcutaneous acupoint electrical stimulation (TAES) on hemodynamic fluctuation caused by loosing tourniquet in the elderly patients undergoing knee joint replacement. A total of 60 ASA (America Society Anesthesiologist) I or II elderly patients for elective knee joint replacement surgery were randomly divided into control group (30 cases) and TAES group (30 cases). Patients of both groups were treated by intravenous anesthesia, and monitored with bispectral index (BIS, between 45-60) for anesthesia depth, stroke volume variation (SVV) for fluid management, mean arterial pressure (MAP) and cardiac index (CI) for hemodynamic fluctuation evaluation, and with analgesia nociception index (ANI, between 50-70) for remifentanil dosage adjustment. TAES (2 Hz/100 Hz, 8-20 mA) was applied to bilateral Xinshu (BL 15), Feishu (BL 13), Neiguan (PC 6) and Hegu (LI 4) acupoints for 30 min first (followed by anesthesia induction and operation), and given continuously until 15 min after tourniquet loosing. Patients of the control group were only given with electrodes attachment without electrical stimulation. The levels of MAP, CI, and arterial blood pH, PaCO 2 , PaO 2 , base excess (BE) and lactic acid (Lac) 1 min before, and 5 and 15 min after tourniquet loosing, and the dosages of remifentanil and ephedrine after tourniquet loosing were recorded. The changed levels of MAP, CI and blood Lac at 5 min after tourniquet loosing (relevant to the baseline levels), and blood Lac content at 15 min after tourniquet loosing (relevant to 5 min after tourniquet loosing) were significantly lower in the TAES group than in the control group ( P 0.05). TAES has a positive effect on hemodynamics fluctuation caused by loosing tourniquet in the aged patients undergoing knee joint replacement.

  11. Applications of the monitor of loose parts in the cycle 6 of the Laguna Verde Unit 2 power plant

    International Nuclear Information System (INIS)

    Calleros, G.; Mendez, A.; Gomez, R.A.; Castillo, R.; Bravo, J.M.

    2004-01-01

    The monitor of loose parts (Loose Parts Monitoring System) installed in the Unit 2 of the Laguna Verde Central is a tool to detect strange objects or parts loose in the system of refrigeration of the reactor that could be impacted in the walls of the recirculation knots or in the internal of the reactor. In this work two applications are shown carried out with the Monitor of Loose Parts, determining the characteristics of the stable nominal conditions, those which when changing, they are used to diagnose during the Cycle 6 of the Unit 2, failures in the components of the the recirculation circuits or to identify mechanical vibrations of the recirculation knots induced by a flow of recirculation bistable associated to operative conditions of the reactor. (Author)

  12. Pre-feasibility investigation of infrared thermography for the identification of loose hanging wall and impending falls of ground.

    CSIR Research Space (South Africa)

    Kononov, VA

    2000-09-01

    Full Text Available on the temperature difference (gradient) between solid rock and the tip of loose rock due to the heat exchange between loose rock and ventilation air. Early attempts to introduce this method of loose rock detection took place in the 1970’s in North America. A... 24 References 26 5 List of Figures Page Figure 2.1 Spectral radiant emittance of a blackbody 8 Figure 4.2.1 A 1-D fin model using theoretical correlations 13 Figure 4.2.2 Temperature profile in the slab (1-D fin model) 15 Figure 4...

  13. Tips for cleanroom construction and renovation.

    Science.gov (United States)

    Mixon, William; Huffman, Lanny

    2009-01-01

    The installation or renovation of a cleanroom is an increasing priority among compounders who, to offer sterile preparations, must comply with the most recent version of United States Pharmacopeia revised General Chapter 797 guidelines. To upgrade their pharmacy facilites, many compounders have worked successfully with a large-scale mechanical engineering firm or a specialized construction company dedicated to cleanroom installation. However, a qualified local mechanical contractor with design capability is a valuable and often overlooked resource for the construction of customized stae-of-the-art cleanrooms. In this report, we describe the installation of such a facility in a busy pharmacy and suggest ways in which compounding pharmacists can identify competent local contractors and control the cost of construction and upgrades. The addition of a cleanroom has enabled The Compounding Pharmacy in Hickory, North Carolina, to achieve accreditation from the Pharmacy Compounding Accreditation Board.

  14. Distributed Solutions for Loosely Coupled Feasibility Problems Using Proximal Splitting Methods

    DEFF Research Database (Denmark)

    Pakazad, Sina Khoshfetrat; Andersen, Martin Skovgaard; Hansson, Anders

    2014-01-01

    In this paper,we consider convex feasibility problems (CFPs) where the underlying sets are loosely coupled, and we propose several algorithms to solve such problems in a distributed manner. These algorithms are obtained by applying proximal splitting methods to convex minimization reformulations ...

  15. Renovating process for Pressurized Water Reactor control rod assemblies and corresponding control

    International Nuclear Information System (INIS)

    Jahnke, S.; Ple, P.

    1989-01-01

    In the first PWRs the control rods are moving by the intermediary of electromagnetic mechanisms where the power fed to the electromagnets is selected by a hard wired logic circuit connected to the controldesh by another logic control. For renovating the control rod assemblies each power assembly is replaced by an electronic assembly containing an ordinator and power supply interfaces [fr

  16. [History of the renovation of the hôtel-Dieu of Bourges].

    Science.gov (United States)

    Gitton, Philippe

    2006-01-01

    From the 16th to the 20th century "hôtel-Dieu" was the main hospital in the Berry capital. In the 30's the mayor decided to renovate the building but in 1994 the construction of a new hospital--"Centre Hospitalier Jacques-Coeur"--freed the ancient building which became a historical centre for culture et tourism in the region.

  17. The influence of salinity of fly ash mixtures on energy looses during flow in pipelines

    OpenAIRE

    И. Собота

    2017-01-01

    In Polish mining for backfilling the fly ash mixtures are used. Last time for fly ash mixtures preparation the saline water from mine have been used, to thanks to that the saline water missing the surface waters. Usage of saline water for fly ash mixture preparation causes the changes in energy looses during the flow in pipelines. The paper presents the results of energy looses measurement іn laboratory pipeline installation with diameter D =50 mm. The measurements have been performed for dif...

  18. Loose glenoid components in revision shoulder arthroplasty: is there an association with positive cultures?

    Science.gov (United States)

    Lucas, Robert M; Hsu, Jason E; Whitney, Ian J; Wasserburger, Jory; Matsen, Frederick A

    2016-08-01

    Glenoid loosening is one of the most common causes of total shoulder failure. High rates of positive cultures of Propionibacterium and coagulase-negative staphylococcus have been found among shoulders having surgical revision for glenoid loosening. This study reviewed the culture results in a series of surgical revisions for failed total shoulder arthroplasty to determine the relationship between glenoid loosening and positive cultures. The medical records of 221 patients without obvious evidence of infection who underwent revision total shoulder arthroplasty were reviewed to examine the association between the security of fixation of the glenoid component and the results of cultures obtained at revision surgery. Of the revised shoulders, 53% had positive cultures; 153 of the shoulders (69%) had a loose glenoid component, whereas 68 (31%) had secure glenoid component fixation. Of the 153 loose glenoid components, 82 (54%) had at least 1 positive culture and 44 (29%) had 2 or more positive cultures of the same microorganism. Similarly, of the 68 secure glenoid components, 35 (51%) had at least 1 positive culture (P = .77) and 14 (21%) had 2 or more positive cultures of the same microorganism (P = .25). Explanted glenoid components that were loose had a higher rate of culture positivity (56% [24/43]) in comparison to explanted glenoid components that were well fixed (13% [1/8]) (P = .05). Propionibacterium and coagulase-negative staphylococcus are commonly recovered in revision shoulder arthroplasty, whether or not the glenoid components are loose. Copyright © 2016 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.

  19. Pyrosequencing reveals bacterial communities in unchlorinated drinking water distribution system: an integral study of bulk water, suspended solids, loose deposits, and pipe wall biofilm.

    Science.gov (United States)

    Liu, G; Bakker, G L; Li, S; Vreeburg, J H G; Verberk, J Q J C; Medema, G J; Liu, W T; Van Dijk, J C

    2014-05-20

    The current understanding of drinking water distribution system (DWDS) microbiology is limited to pipe wall biofilm and bulk water; the contributions of particle-associated bacteria (from suspended solids and loose deposits) have long been neglected. Analyzing the composition and correlation of bacterial communities from different phases helped us to locate where most of the bacteria are and understand the interactions among these phases. In the present study, the bacteria from four critical phases of an unchlorinated DWDS, including bulk water, pipe wall biofilm, suspended solids, and loose deposits, were quantified and identified by adenosine triphosphate analysis and pyrosequencing, respectively. The results showed that the bulk water bacteria (including the contribution of suspended solids) contributed less than 2% of the total bacteria. The bacteria associated with loose deposits and pipe wall biofilm that accumulated in the DWDS accounted for over 98% of the total bacteria, and the contributions of bacteria in loose deposits and pipe wall biofilm were comparable. Depending on the amount of loose deposits, its contribution can be 7-fold higher than the pipe wall biofilm. Pyrosequencing revealed relatively stable bacterial communities in bulk water, pipe wall biofilm, and suspended solids throughout the distribution system; however, the communities present in loose deposits were dependent on the amount of loose deposits locally. Bacteria within the phases of suspended solids, loose deposits, and pipe wall biofilm were similar in phylogenetic composition. The bulk water bacteria (dominated by Polaromonas spp.) were clearly different from the bacteria from the other three phases (dominated by Sphingomonas spp.). This study highlighted that the integral DWDS ecology should include contributions from all of the four phases, especially the bacteria harbored by loose deposits. The accumulation of loose deposits and the aging process create variable microenvironments

  20. Pyrosequencing Reveals Bacterial Communities in Unchlorinated Drinking Water Distribution System: An Integral Study of Bulk Water, Suspended Solids, Loose Deposits, and Pipe Wall Biofilm

    KAUST Repository

    Liu, G.

    2014-05-20

    The current understanding of drinking water distribution system (DWDS) microbiology is limited to pipe wall biofilm and bulk water; the contributions of particle-associated bacteria (from suspended solids and loose deposits) have long been neglected. Analyzing the composition and correlation of bacterial communities from different phases helped us to locate where most of the bacteria are and understand the interactions among these phases. In the present study, the bacteria from four critical phases of an unchlorinated DWDS, including bulk water, pipe wall biofilm, suspended solids, and loose deposits, were quantified and identified by adenosine triphosphate analysis and pyrosequencing, respectively. The results showed that the bulk water bacteria (including the contribution of suspended solids) contributed less than 2% of the total bacteria. The bacteria associated with loose deposits and pipe wall biofilm that accumulated in the DWDS accounted for over 98% of the total bacteria, and the contributions of bacteria in loose deposits and pipe wall biofilm were comparable. Depending on the amount of loose deposits, its contribution can be 7-fold higher than the pipe wall biofilm. Pyrosequencing revealed relatively stable bacterial communities in bulk water, pipe wall biofilm, and suspended solids throughout the distribution system; however, the communities present in loose deposits were dependent on the amount of loose deposits locally. Bacteria within the phases of suspended solids, loose deposits, and pipe wall biofilm were similar in phylogenetic composition. The bulk water bacteria (dominated by Polaromonas spp.) were clearly different from the bacteria from the other three phases (dominated by Sphingomonas spp.). This study highlighted that the integral DWDS ecology should include contributions from all of the four phases, especially the bacteria harbored by loose deposits. The accumulation of loose deposits and the aging process create variable microenvironments

  1. Buildings move. The benefit of sustainable renovation of office buildings; Gebouwen bewegen. De winst van duurzame kantoorrenovatie

    Energy Technology Data Exchange (ETDEWEB)

    Van Miert, M. [Bureau Van Miert, Breda (Netherlands); De Ruiter, P. [Architectenbureau Paul de Ruiter, Amsterdam (Netherlands); Verburgt, P.

    2012-05-15

    Within the programme 'EnergieSprong' the development of the so-called Transition Formula was initiated that shows how existing offices can be renovated into energy efficient or even energy neutral buildings. A multidisciplinary view on the existing office buildings stock and users' demand has led to four renovation strategies which are described in this book [Dutch] EnergieSprong heeft het initiatief genomen dit boek te ontwikkelen waarin de Transitieformule laat zien hoe het vandaag de dag mogelijk is om bestaande kantoren heel energiezuinig of zelfs energieneutraal te renoveren. Een multidisciplinaire kijk op de bestaande kantorenvoorraad en de huidige vraag van gebruikers heeft geleid tot een viertal renovatiestrategieen die in dit boek beschreven worden.

  2. High-density genetic mapping of a major QTL for resistance to multiple races of loose smut in a tetraploid wheat cross

    Science.gov (United States)

    Kumar, Sachin; Knox, Ron E.; Singh, Asheesh K.; DePauw, Ron M.; Campbell, Heather L.; Isidro-Sanchez, Julio; Clarke, Fran R.; Pozniak, Curtis J.; N’Daye, Amidou; Meyer, Brad; Sharpe, Andrew; Ruan, Yuefeng; Cuthbert, Richard D.; Somers, Daryl; Fedak, George

    2018-01-01

    Loose smut, caused by Ustilago tritici (Pers.) Rostr., is a systemic disease of tetraploid durum wheat (Triticum turgidum L.). Loose smut can be economically controlled by growing resistant varieties, making it important to find and deploy new sources of resistance. Blackbird, a variety of T. turgidum L. subsp. carthlicum (Nevski) A. Love & D. Love, carries a high level of resistance to loose smut. Blackbird was crossed with the loose smut susceptible durum cultivar Strongfield to produce a doubled haploid (DH) mapping population. The parents and progenies were inoculated with U. tritici races T26, T32 and T33 individually and as a mixture at Swift Current, Canada in 2011 and 2012 and loose smut incidence (LSI) was assessed. Genotyping of the DH population and parents using an Infinium iSelect 90K single nucleotide polymorphism (SNP) array identified 12,952 polymorphic SNPs. The SNPs and 426 SSRs (previously genotyped in the same population) were mapped to 16 linkage groups spanning 3008.4 cM at an average inter-marker space of 0.2 cM in a high-density genetic map. Composite interval mapping analysis revealed three significant quantitative trait loci (QTL) for loose smut resistance on chromosomes 3A, 6B and 7A. The loose smut resistance QTL on 6B (QUt.spa-6B.2) and 7A (QUt.spa-7A.2) were derived from Blackbird. Strongfield contributed the minor QTL on 3A (QUt.spa-3A.2). The resistance on 6B was a stable major QTL effective against all individual races and the mixture of the three races; it explained up to 74% of the phenotypic variation. This study is the first attempt in durum wheat to identify and map loose smut resistance QTL using a high-density genetic map. The QTL QUt.spa-6B.2 would be an effective source for breeding resistance to multiple races of the loose smut pathogen because it provides near-complete broad resistance to the predominant virulence on the Canadian prairies. PMID:29485999

  3. High-density genetic mapping of a major QTL for resistance to multiple races of loose smut in a tetraploid wheat cross.

    Directory of Open Access Journals (Sweden)

    Sachin Kumar

    Full Text Available Loose smut, caused by Ustilago tritici (Pers. Rostr., is a systemic disease of tetraploid durum wheat (Triticum turgidum L.. Loose smut can be economically controlled by growing resistant varieties, making it important to find and deploy new sources of resistance. Blackbird, a variety of T. turgidum L. subsp. carthlicum (Nevski A. Love & D. Love, carries a high level of resistance to loose smut. Blackbird was crossed with the loose smut susceptible durum cultivar Strongfield to produce a doubled haploid (DH mapping population. The parents and progenies were inoculated with U. tritici races T26, T32 and T33 individually and as a mixture at Swift Current, Canada in 2011 and 2012 and loose smut incidence (LSI was assessed. Genotyping of the DH population and parents using an Infinium iSelect 90K single nucleotide polymorphism (SNP array identified 12,952 polymorphic SNPs. The SNPs and 426 SSRs (previously genotyped in the same population were mapped to 16 linkage groups spanning 3008.4 cM at an average inter-marker space of 0.2 cM in a high-density genetic map. Composite interval mapping analysis revealed three significant quantitative trait loci (QTL for loose smut resistance on chromosomes 3A, 6B and 7A. The loose smut resistance QTL on 6B (QUt.spa-6B.2 and 7A (QUt.spa-7A.2 were derived from Blackbird. Strongfield contributed the minor QTL on 3A (QUt.spa-3A.2. The resistance on 6B was a stable major QTL effective against all individual races and the mixture of the three races; it explained up to 74% of the phenotypic variation. This study is the first attempt in durum wheat to identify and map loose smut resistance QTL using a high-density genetic map. The QTL QUt.spa-6B.2 would be an effective source for breeding resistance to multiple races of the loose smut pathogen because it provides near-complete broad resistance to the predominant virulence on the Canadian prairies.

  4. Interactive Configuration of High Performance Renovation of Apartment Buildings by the use of CSP

    DEFF Research Database (Denmark)

    Vareilles, E.; Thuesen, Christian; Falcon, M.

    2013-01-01

    of mid-rise (up to seven stories) apartment buildings. The renovation is based on external rectangular panels, always comprising insulation and cladding, and sometimes including, in addition, doors, windows or solar modules. The panels can be fixed directly onto the walls or onto a metal structure around...

  5. Hot cell renovation in the spent fuel conditioning process facility at the Korea Atomic Energy Research Institute

    Energy Technology Data Exchange (ETDEWEB)

    Yu, Seung Nam; Lee, Jong Kwang; Park, Byung Suk; Cho, Il Je; Kim, Ki Ho [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2015-10-15

    The advanced spent fuel conditioning process facility (ACPF) of the irradiated materials examination facility (IMEF) at the Korea Atomic Energy Research Institute (KAERI) has been renovated to implement a lab scale electrolytic reduction process for pyroprocessing. The interior and exterior structures of the ACPF hot cell have been modified under the current renovation project for the experimentation of the electrolytic reduction process using spent nuclear fuel. The most important aspect of this renovation was the installation of the argon compartment within the hot cell. For the design and system implementation of the argon compartment system, a full-scale mock-up test and a three-dimensional (3D) simulation test were conducted in advance. The remodeling and repairing of the process cell (M8a), the maintenance cell (M8b), the isolation room, and their utilities were also planned through this simulation to accommodate the designed argon compartment system. Based on the considered refurbishment workflow, previous equipment in the M8 cell, including vessels and pipes, were removed and disposed of successfully after a zoning smear survey and decontamination, and new equipment with advanced functions and specifications were installed in the hot cell. Finally, the operating area and isolation room were also refurbished to meet the requirements of the improved hot cell facility.

  6. Architects and Librarians under Pressure: Dialoguing about Renovation of a Library in a Constrained Environment

    Directory of Open Access Journals (Sweden)

    André Lohisse

    2008-09-01

    Full Text Available A librarian and an architect conduct the essential dialogue involved in renovating an academic library in Paris, comparing architectural concerns with the exigencies of public use, and juxtaposing technical requirements with the functional organisation of the library.

  7. Acoustic Properties of a Renovated Building

    Directory of Open Access Journals (Sweden)

    Tomas Januševičius

    2011-02-01

    Full Text Available The article explores the effects of partitions, ceilings and facades on noise insulation in the renovated different buildings. The conducted experiments were aimed at analyzing partitions of 120 mm brick mounted gypsum panels while other walls were 520 mm thick and plastered on both sides. Under natural conditions, sound insulation factors of facades were measured and compared according to comfort classes. The obtained results revealed that thick brick walls of 520 mm insulated the sound of 58 decibels (dB (class B. In contrast, 120 mm brick masonry partition reduced sound only to 48 dB which is class E and agrees with the lowest class of sound insulation. We also calculated the sound insulation factor applying three formulas considering the mass law of sound insulation and comparing it with other previous studies. The paper examines and discusses the findings of the performed calculations and measurements.Article in Lithuanian

  8. Design of a Loose Part Monitoring System Test-bed using CompactRIO

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Min-seok; Lee, Kwang-Dae; Lee, Eui-Jong [KHNP CRI, Daejeon (Korea, Republic of)

    2016-10-15

    A loose part monitoring system (LPMS) is included in the NSSS integrity monitoring system (NIMS), which serves to detect loose parts in reactor coolant systems (RCS). LPMSs at Nuclear Power Plants (NPPs) in Korea follow the ASME OM standard and acquire data from 18 sensors simultaneously. Data acquisition requires a sampling rate of more than 50KHz along with a 12bit A/D converter. Existing LPMS equipment is composed of several different platforms, such as a digital signal processor (DSP), a field-programmable gate array (FPGA), a micro control unit (MCU), and electric circuit cards. These systems have vulnerabilities, such as discontinuance due to aging and incompatibility issues between different pieces of equipment. This paper suggests CompactRIO as a new platform. We devised a Test-bed using CompactRIO and demonstrate that the proposed method meets the criteria required by the standard. The LPMS provides an alert when an impact event occurs and provides information with which to analyze the location, energy, and mass of the loose parts. LPMSs in NPPs in Korea operate on a variety of platforms. Thus, these systems are vulnerable to discontinuances due to aging and incompatibilities arising from the use of different type of equipment. In order to solve these problems, this paper suggests CompactRIO as a new platform. It is a rugged, reconfigurable, high-performance industrial embedded system. The results of performance tests meet the criteria set by the current standard.

  9. Experiments in MARIUS on HTR tubular fuel with loose particles

    Energy Technology Data Exchange (ETDEWEB)

    Bosser, R; Langlet, G

    1972-06-15

    The work described on HTR tubular fuel with loose particles is the first part of a program in three points. The cell is the same in the three experiments, only particles in the fuel container are changed. The aim of the experiment is to achieve the buckling in a critical facility. A description of the techniques of measurements, calculations, and results are presented.

  10. Thermal protection system gap analysis using a loosely coupled fluid-structural thermal numerical method

    Science.gov (United States)

    Huang, Jie; Li, Piao; Yao, Weixing

    2018-05-01

    A loosely coupled fluid-structural thermal numerical method is introduced for the thermal protection system (TPS) gap thermal control analysis in this paper. The aerodynamic heating and structural thermal are analyzed by computational fluid dynamics (CFD) and numerical heat transfer (NHT) methods respectively. An interpolation algorithm based on the control surface is adopted for the data exchanges on the coupled surface. In order to verify the analysis precision of the loosely coupled method, a circular tube example was analyzed, and the wall temperature agrees well with the test result. TPS gap thermal control performance was studied by the loosely coupled method successfully. The gap heat flux is mainly distributed in the small region at the top of the gap which is the high temperature region. Besides, TPS gap temperature and the power of the active cooling system (CCS) calculated by the traditional uncoupled method are higher than that calculated by the coupled method obviously. The reason is that the uncoupled method doesn't consider the coupled effect between the aerodynamic heating and structural thermal, however the coupled method considers it, so TPS gap thermal control performance can be analyzed more accurately by the coupled method.

  11. Investigating the business case for a zero-energy refurbishment of residential buildings by applying a pre-fabricated façade module

    NARCIS (Netherlands)

    Azcarate Aguerre, J.F.; Konstantinou, T.; Klein, T.; Steensma, S.; Guerra Santin, O.; Silvester, S.; Laitinen Lindström, Therese; Blume, Ylva; Regebro, Margareta; Hampus, Nina; Hiltunen, Vanja

    2017-01-01

    The ambition to renovate the post-war building stock to an energy-neutral quality is getting a lot of attention from social housing corporations and other institutional owners, financial organizations, and users. An effective renovation plan must significantly improve the current energy performance

  12. The socioeconomic impact of energy saving renovation measures in urban buildings

    OpenAIRE

    Mikulić, Davor; Rašić Bakarić, Ivana; Slijepčević, Sunčana

    2016-01-01

    The purpose of the paper is to investigate the role of measures oriented to energy savings in residential buildings in the economic development at the regional level. The aim of the paper is to estimate overall socio-economic impact of energy saving renovation measures in the Croatian urban areas. Impact assessment is based on input–output methodology which is able to quantify direct and indirect effects of investment in the energy saving projects on the economic activity and employment...

  13. Evaluation of cleaning methods applied in home environments after renovation and remodeling activities

    International Nuclear Information System (INIS)

    Yiin, L.-M.; Lu, S.-E.; Sannoh, Sulaiman; Lim, B.S.; Rhoads, G.G.

    2004-01-01

    We conducted a cleaning trial in 40 northern New Jersey homes where home renovation and remodeling (R and R) activities were undertaken. Two cleaning protocols were used in the study: a specific method recommended by the US Department of Housing and Urban Development (HUD), in the 1995 'Guidelines for the Evaluation and Control of Lead-Based Paint Hazards in Housing', using a high-efficiency particulate air (HEPA)-filtered vacuum cleaner and a tri-sodium phosphate solution (TSP); and an alternative method using a household vacuum cleaner and a household detergent. Eligible homes were built before the 1970s with potential lead-based paint and had recent R and R activities without thorough cleaning. The two cleaning protocols were randomly assigned to the participants' homes and followed the HUD-recommended three-step procedure: vacuuming, wet washing, and repeat vacuuming. Wipe sampling was conducted on floor surfaces or windowsills before and after cleaning to evaluate the efficacy. All floor and windowsill data indicated that both methods (TSP/HEPA and non-TSP/non-HEPA) were effective in reducing lead loading on the surfaces (P<0.001). When cleaning was applied to surfaces with initial lead loading above the clearance standards, the reductions were even greater, above 95% for either cleaning method. The mixed-effect model analysis showed no significant difference between the two methods. Baseline lead loading was found to be associated with lead loading reduction significantly on floors (P<0.001) and marginally on windowsills (P=0.077). Such relations were different between the two cleaning methods significantly on floors (P<0.001) and marginally on windowsills (P=0.066), with the TSP/HEPA method being favored for higher baseline levels and the non-TSP/non-HEPA method for lower baseline levels. For the 10 homes with lead abatement, almost all post-cleaning lead loadings were below the standards using either cleaning method. Based on our results, we recommend that

  14. Effect of different brewing times on soluble oxalate content of loose-packed black teas and tea bags.

    Science.gov (United States)

    Mahdavi, Reza; Lotfi Yagin, Neda; Liebman, Michael; Nikniaz, Zeinab

    2013-02-01

    Because of the postulated role of increased dietary oxalate intake in calcium oxalate stone formation, the effect of different brewing times on soluble oxalate contents of loose-packed black tea and tea bags was studied. The oxalate content of 25 different samples of loose-packed black teas after brewing at 5, 10, 15, 30, and 60 min and of ten brands of tea bags after infusion for 1, 2, 3, 4, and 5 min was measured by enzymatic assay. The oxalate concentration resulting from different brewing times ranged from 4.3 to 6.2 mg/240 ml for loose-packed black teas and from 2.7 to 4.8 mg/240 ml for tea bags. There was a stepwise increase in oxalate concentration associated with increased brewing times.

  15. Loose and Tight Coupling in Educational Organizations--An Integrative Literature Review

    Science.gov (United States)

    Hautala, Tanja; Helander, Jaakko; Korhonen, Vesa

    2018-01-01

    Purpose: The purpose of this paper is to review and synthesize the attributes of loose and tight coupling in educational organizations. In addition, it is aimed to determine whether this phenomenon has value and strategies to offer for the current educational administration and research. Design/methodology/approach: Integrative literature review…

  16. Inspiration and experiences from the joint analysis of shining examples of comprehensive energy renovation building projects within IEA EBC Annex 56

    DEFF Research Database (Denmark)

    Christen Mørck, Ove; Almeida, Manuela; Ferreira, Marco

    2016-01-01

    The International Energy Agency established in 2011 an Implementing Agreement within the Energy in Buildings and Communities Program to undertake research and provide an international focus on Cost Effective Energy and Carbon Emissions Optimization in Building Renovation (EBC Annex 56). The project...... aimed at developing a new methodology to enable cost effective renovation of existing buildings while optimizing energy consumption and carbon emissions reduction. Gathering of case studies was one of the activities undertaken to reach the overall project objectives. Among the case studies, a selection...

  17. Understanding of Danish Passive Houses based on Pilot Project the Comfort Houses

    DEFF Research Database (Denmark)

    Brunsgaard, Camilla

    2010-01-01

    The building industry in Denmark and the rest of Europe is facing challenges in fulfilling the EU directive of 2002. New buildings and renovation projects need to improve the energy performance to be able to fulfil the Kyoto agreement from 1998 (Directive 2002). In Denmark it has resulted in new ...

  18. Renovating Charity Hospital or building a new hospital in post-Katrina New Orleans: economic rationale versus political will.

    Science.gov (United States)

    Leleu, Hervé; Moises, James; Valdmanis, Vivian Grace

    2013-02-01

    Since September 2005, Charity Hospital of New Orleans has been closed due to Hurricane Katrina. A debate following the closing arose about whether this public hospital should be renovated or a new medical center affiliated with the Louisiana State University should be built. Using academic literature, government statistics, and popular press reports, we describe the economic implications that support the view that Charity Hospital should have been renovated. We also address why this policy was not pursued by demonstrating the influence politics and individual stakeholders (specifically, Louisiana State University) had on the eventual policy pursued. In this commentary we also note the political identity movement away from public-sector provision of services to private-sector interests.

  19. Energia Renovable para Centros de Salud Rurales (Renewable Energy for Rural Health Clinics)

    Energy Technology Data Exchange (ETDEWEB)

    Jimenez, T.; Olson, K.

    1999-07-28

    Esta es la primera de una serie de guias de aplicaciones que el Programa de Energia de Villas de NREL esta comisionando para acoplar sistemas comerciales renovables con aplicaciones rurales, incluyendo agua, escuelas rurales y micro empresas. La guia esta complementada por las actividades de desarrollo del Programa de Energia de Villas de NREL, proyectos pilotos internacionales y programas de visitas profesionales.

  20. Assessment of Soil Liquefaction Potential in Defence Housing Authority, Karachi, Pakistan

    Directory of Open Access Journals (Sweden)

    Sumaira Asif Khan

    2017-04-01

    Full Text Available The occurrence of liquefaction phenomenon may be induced in the event of a large magnitude earthquake but sometimes loose, saturated and poorly graded sand may be subjected to liquefaction due to the vibration produced by other sources. Liquefaction could cause damage to building and infrastructure due to sudden increase of pore pressure in the loose layers of saturated sand causing the loss of bearing capacity and shear strength. Defence Housing Authority (DHA is the well planned residential scheme established by Pakistan Army along the coastal belt of Karachi. The soil occurring in DHA is fine grained, poorly graded and mainly comprises of sandy silt and silty sand of Recent age, where water table is encountered at very shallow depth. Hence, it is important to assess the geotechnical behavior of the soil in DHA area, where most of the high rise buildings and mega civil structures are being constructed. In present study, seismic soil liquefaction was evaluated at 15 sites (30 bore holes in DHA by using simplified empirical method in terms of Factor of Safety (FS. The Relative Density (RD was determined with the help of Standard Penetration Test (SPT data. Grain size analysis was also carried out on each borehole samples. The results revealed that the DHA area is vulnerable to liquefaction during severe seismic event of magnitude between 6.5 and 7.5 in Karachi.

  1. Loose part trapping device in the secondary circuit of a steam generator

    International Nuclear Information System (INIS)

    Poussin, C.; Ayme, H.

    1993-01-01

    The trap is principally formed from mesh filter placed across the annular section of the secondary circuit. The maximum mesh size is less than the distance separating the tubes so that the loose parts cannot caught between the tubular bundle tubes. 6 figs

  2. Transforming the existing building stock to high performed energy efficient and experienced architecture

    DEFF Research Database (Denmark)

    Vestergaard, Inge

    architectural heritage to energy efficiency and from architectural quality to sustainability. The first, second and third renovations are discussed from financial and sustainable view points. The role of housing related to the public energy supply system and the relation between the levels of renovation......The project Sustainable Renovation examines the challenge of the current and future architectural renovation of Danish suburbs which were designed in the period from 1945 to 1973. The research project takes its starting point in the perspectives of energy optimization and the fact that the building...

  3. Problemas institucionales de las energías renovables en México

    OpenAIRE

    Samuel Brugger; Ma. Elena Nancy Dávila Moreno; Manuel Francisco Llamas Galván

    2011-01-01

    Este ensayo trata de explicar los problemas institucionales y jurídicos que han limitado el aprovechamiento de dichas energías alternativas. El trabajo presenta la situación actual de México; después analiza el potencial que tiene el país. De ahí se pasa al estudio de la problemática institucional y jurídica que no ha logrado fomentar la promoción de energías renovables en México.

  4. Problemas institucionales de las energías renovables en México

    Directory of Open Access Journals (Sweden)

    Samuel Brugger

    2011-09-01

    Full Text Available Este ensayo trata de explicar los problemas institucionales y jurídicos que han limitado el aprovechamiento de dichas energías alternativas. El trabajo presenta la situación actual de México; después analiza el potencial que tiene el país. De ahí se pasa al estudio de la problemática institucional y jurídica que no ha logrado fomentar la promoción de energías renovables en México.

  5. Importancia de las energías renovables en la seguridad energética y su relación con el crecimiento económico.

    Directory of Open Access Journals (Sweden)

    Lilian Paola Umbarila Valencia

    2015-12-01

    Full Text Available La creciente demanda de las necesidades sociales a nivel global, impulsada por los hábitos de vida y la forma en la que se organizan las regiones ha llevado al crecimiento paralelo de la industria y con ello al creciente aumento del consumo de energía. Este artículo de investigación reflexiona acerca de la relevancia que tienen las energías renovables para la seguridad energética, teniendo en cuenta la inestabilidad de los precios del petróleo y su influencia en el mercado de los hidrocarburos como fuente primaria de energía. Se evidencian los avances que han tenido las tecnologías de energías renovables a nivel global, regional y local y el rol que juegan en la independencia energética y en la mitigación del impacto ambiental. Se concluye que las naciones deben buscar la optimización de las energías renovables desde los ámbitos: local, regional y global propendiendo por su uso adecuado desde la legislación. El futuro de las energías renovables está dado por la rentabilidad, ya que para que el uso de éstas siga creciendo, deben seguir atrayendo capital lo cual significa que los inversores deben ver una rentabilidad competitiva. Otra recomendación importante es la integración de la energía renovable en la red, incluyendo fuentes de generación intermitentes e incluso imprevisibles. 

  6. Measuring buildings for sustainability: Comparing the initial and retrofit ecological footprint of a century home – The REEP House

    International Nuclear Information System (INIS)

    Bin, Guoshu; Parker, Paul

    2012-01-01

    Highlights: ► Life cycle energy, carbon and ecological footprints of a century home are studied. ► The operational impact accounts for most of the total lifecycle impact. ► Sourcing energy-intensive materials locally only reduces embodied impacts a little. ► Deep energy retrofits (80% savings) achieved substantial environmental benefits. ► The environmental payback period of major energy retrofits is less than 2 years. - Abstract: The residential sector is recognized as a major energy consumer and thus a significant contributor to climate change. Rather than focus only on current energy consumption and the associated emissions, there is a need to broaden sustainability research to include full life cycle contributions and impacts. This paper looks at houses from the perspective of the ecological footprint (EF), a well-known sustainability indicator. Exemplifying single-detached houses of the early 20th century, the century-old REEP House (downtown Kitchener, Canada), together with its high performance energy retrofits, is examined in detail. This research combines material, energy and carbon emission studies. Its scope covers the life cycle of the house, including the direct and indirect consumption of material and energy, and concomitant carbon emissions during its stages of material extraction, transportation, construction, operation, and demolition. It is revealed that the REEP House had a typical impact on the environment when it was built, and, even though the renovations to improve energy efficiency by 80% introduce additional embodied environmental impacts, they are environmentally sound activities because the environmental payback period is less than 2 years.

  7. Life Cycle Thinking and Integrated Product Deliveries in renovation projects: Extending the concept of Integrated Product Deliveries with Product Service Systems

    DEFF Research Database (Denmark)

    Schipull Kauschen, Jan

    2012-01-01

    extension to the concept of IPDs discussed. Due to extended product responsibility, the concept of PSSs will offer new possibilities of planning and pre-defining life cycles of IPDs more precisely than for regular building components. Reducing or eliminating point-of-sales will induce producers to optimize...... on renovation projects from Denmark, using different forms of IPDs for façade renovation and discusses the different stakeholder’s perspectives on life cycle thinking and their interests and values regarding sustainable building. Furthermore is the concept of Product Service Systems (PSS) as a valuable...

  8. Renovation of CPF (Chemical Processing Facility) for Development of Advanced Fast Reactor Fuel Cycle System

    International Nuclear Information System (INIS)

    Shinichi Aose; Takafumi Kitajima; Kouji Ogasawara; Kazunori Nomura; Shigehiko Miyachi; Yoshiaki Ichige; Tadahiro Shinozaki; Shinichi Ohuchi

    2008-01-01

    CPF (Chemical Processing Facility) was constructed at Nuclear Fuel Cycle Engineering Laboratories of JAEA (Japan Atomic Energy Agency) in 1980 as a basic research field where spent fuel pins from fast reactor (FR) and high level liquid waste can be dealt with. The renovation consists of remodeling of the CA-3 cell and the laboratory A, installation of globe boxes, hoods and analytical equipments to the laboratory C and the analytical laboratory. Also maintenance equipments in the CA-5 cell which had been out of order were repaired. The CA-3 cell is the main cell in which important equipments such as a dissolver, a clarifier and extractors are installed for carrying out the hot test using the irradiated FR fuel. Since the CPF had specialized originally in the research function for the Purex process, it was desired to execute the research and development of such new, various reprocessing processes. Formerly, equipments were arranged in wide space and connected with not only each other but also with utility supply system mainly by fixed stainless steel pipes. It caused shortage of operation space in flexibility for basic experimental study. Old equipments in the CA-3 cell including vessels and pipes were removed after successful decontamination, and new equipments were installed conformably to the new design. For the purpose of easy installation and rearranging the experimental equipments, equipments are basically connected by flexible pipes. Since dissolver is able to be easily replaced, various dissolution experiments is conducted. Insoluble residue generated by dissolution of spent fuel is clarified by centrifugal. This small apparatus is effective to space-saving. Mini mixer settlers or centrifugal contactors are put on to the prescribed limited space in front of the backside wall. Fresh reagents such as solvent, scrubbing and stripping solution are continuously fed from the laboratory A to the extractor by the reagent supply system with semi-automatic observation

  9. Researching Lean: Methodological Implications of Loose Definitions

    Directory of Open Access Journals (Sweden)

    Mikael Brännmark

    2012-12-01

    Full Text Available Recently, Lean Production (Lean has become a prevailing management concept in Sweden. However, previous research seems to show that the Lean concept and the impact of Lean vary considerably between organizations. This paper illustrates some key methodological issues that need to be considered when researching loosely defined management concepts such as Lean. The paper is based on a review of the literature and five comparative Swedish cases studies. Our study indicates that Lean has changed over time and that operationalization and interpretations of the concept vary considerably. This study concludes that future Lean studies should include a thorough assessment of the Lean interventions, study settings, and in particular non-Lean factors mediating the outcomes of Lean-inspired change programs.

  10. Loose Cigarette Purchasing and Nondaily Smoking Among Young Adult Bar Patrons in New York City.

    Science.gov (United States)

    Guillory, Jamie; Johns, Michael; Farley, Shannon M; Ling, Pamela M

    2015-08-01

    We examined loose cigarette (loosie) purchasing behavior among young adult (aged 18-26 years) smokers at bars in New York City and factors associated with purchase and use. Between June and December 2013, we conducted cross-sectional surveys (n = 1916) in randomly selected bars and nightclubs. Using multivariable logistic regression models, we examined associations of loose cigarette purchasing and use with smoking frequency, price, social norms, cessation behaviors, and demographics. Forty-five percent (n = 621) of nondaily smokers and 57% (n = 133) of daily smokers had ever purchased a loosie; 15% of nondaily smokers and 4% of daily smokers reported that their last cigarette was a loosie. Nondaily smokers who never smoked daily were more likely than were daily smokers to have last smoked a loosie (odds ratio = 7.27; 95% confidence interval = 2.35, 22.48). Quitting behaviors and perceived approval of smoking were associated with ever purchasing and recently smoking loosies. Loosie purchase and use is common among young adults, especially nondaily smokers. Smoking patterns and attitudes should be considered to reduce loose cigarette purchasing among young adults in New York City.

  11. An Experimental Study of Portland Cement and Superfine Cement Slurry Grouting in Loose Sand and Sandy Soil

    Directory of Open Access Journals (Sweden)

    Weijing Yao

    2018-04-01

    Full Text Available Grouting technology is widely applied in the fields of geotechnical engineering in infrastructure. Loose sand and sandy soil are common poor soils in tunnel and foundation treatments. It is necessary to use superfine cement slurry grouting in the micro-cracks of soil. The different effectiveness of Portland cement slurry and superfine cement slurry in sandy soil by the laboratory grouting experiment method were presented in this paper. The grouting situations of superfine cement slurry injected into sand and sandy soil were explored. The investigated parameters were the dry density, wet density, moisture content, internal friction angle, and cohesion force. The results show that the consolidation effect of superfine cement is better than that of Portland cement due to the small size of superfine cement particles. The superfine cement can diffuse into the sand by infiltration, extrusion, and splitting. When the water–cement ratio of superfine cement slurry is less than 2:1 grouting into loose sand, the dry and wet density decrease with the increase in the water–cement ratio, while the moisture content and cohesive force gradually increase. When the water–cement ratio of superfine cement slurry is 1:1 grouting into loose sand and sandy soil, the dry density, wet density, and cohesive force of loose sand are larger than those of sandy soil. The results of the experiment may be relevant for engineering applications.

  12. Surveillance systems (PWR) - loose parts monitoring - vibration monitoring - leakage detection

    International Nuclear Information System (INIS)

    Schuette, A.; Blaesig, H.

    1982-01-01

    The contribution is engaged in the task and the results of the loose parts monitoring and the vibration monitoring following from the practice at the PWR of Biblis. First a description of both systems - location and type of the sensors used, the treatment of the measurements and the indications - is given. The results of the analysis of some events picked up by the surveillance systems are presented showing applicabilty and benefit of such systems. (orig.)

  13. Barriers and Potential Solutions for Energy Renovation of Buildings in Denmark

    DEFF Research Database (Denmark)

    Meyer, Niels I; Mathiesen, Brian vad; Hvelplund, Frede

    2014-01-01

    the supply and demand side for heat, electricity and transport. Implementing such Smart Energy Systems requires integrated strategic energy planning on the national and local level. With the fundamental changes in the energy supply technologies expected during the coming years, it is important to synchronize...... investments in energy conservation measures with investments in the supply side, in order to avoid overinvestment in supply systems and thus to minimize the total costs of the transformation to Smart Energy Systems. This paper highlights some of the most important barriers for renovation of existing buildings...

  14. Energias renováveis nos edifícios de Museus : contribuição para a preservação ambiental

    OpenAIRE

    Mendes, Manuel Cardoso Furtado

    2012-01-01

    Trata-se de um artigo na área da Museologia, onde relacionamos a responsabilidade social dos Museus com a aplicação das energias renováveis aos seus edifícios, quer existentes ou a construir de raiz. Apresentamos as energias renováveis cuja tecnologia de captação e produção estão tecnologicamente desenvolvidas e prontas a serem utilizadas, dando relevo àquelas que mais se adequem na aplicação direta aos edifícios de Museus, de modo a contribuir-se por esta via para a sustentabilidade e pre...

  15. Looseness and Independence Number of Triangulations on Closed Surfaces

    Directory of Open Access Journals (Sweden)

    Nakamoto Atsuhiro

    2016-08-01

    Full Text Available The looseness of a triangulation G on a closed surface F2, denoted by ξ (G, is defined as the minimum number k such that for any surjection c : V (G → {1, 2, . . . , k + 3}, there is a face uvw of G with c(u, c(v and c(w all distinct. We shall bound ξ (G for triangulations G on closed surfaces by the independence number of G denoted by α(G. In particular, for a triangulation G on the sphere, we have

  16. Application of synchrotron microprobe methods to solid-phase speciation of metals and metalloids in house dust.

    Science.gov (United States)

    Walker, S R; Jamieson, H E; Rasmussen, P E

    2011-10-01

    Determination of the source and form of metals in house dust is important to those working to understand human and particularly childhood exposure to metals in residential environments. We report the development of a synchrotron microprobe technique for characterization of multiple metal hosts in house dust. We have applied X-ray fluorescence for chemical characterization and X-ray diffraction for crystal structure identification using microfocused synchrotron X-rays at a less than 10 μm spot size. The technique has been evaluated by application to archived house dust samples containing elevated concentrations of Pb, Zn, and Ba in bedroom dust, and Pb and As in living room dust. The technique was also applied to a sample of soil from the corresponding garden to identify linkages between indoor and outdoor sources of metals. Paint pigments including white lead (hydrocerussite) and lithopone (wurtzite and barite) are the primary source of Pb, Zn, and Ba in bedroom dust, probably related to renovation activity in the home at the time of sampling. The much lower Pb content in the living room dust shows a relationship to the exterior soil and no specific evidence of Pb and Zn from the bedroom paint pigments. The technique was also successful at confirming the presence of chromated copper arsenate treated wood as a source of As in the living room dust. The results of the study have confirmed the utility of this approach in identifying specific metal forms within the dust.

  17. Desarrollo e implantación de energías renovables: situación actual y tendencias

    OpenAIRE

    Picó Heras, Sergio

    2002-01-01

    En esta tesina se tratarán las posibilidades que ofrecen las energías renovables com base de una planificicación energética. El tema se enfocará tanto desde puntos de vista económicos, ambientales, técnicos, políticos, etc

  18. Acceleration Signal Characteristics for Intuitional Mass Analysis of Metallic Loose Parts

    International Nuclear Information System (INIS)

    Lee, Kwang-Hyun; Jung, Chang-Gyu

    2016-01-01

    Nuclear power plants (NPPs) have operated LPMS (Loose Parts Monitoring System) for early detection of the possible presence of metallic parts in the reactor coolant system (RCS); however, analysis of the metallic impact wave characteristics in the LPMS is an important issue because information, such as the mass of the metallic part and the impact location, is not provided. Most studies have concentrated on fieldwork using the frequency characteristics for the analysis of the metallic part mass. Thus, the field engineers cannot analyze signals without special software and access to the system. This paper is intended to introduce a process of intuitional mass analysis using the attenuation rate of the acceleration signal and the intervals between peak signals. Most studies related to mass analysis of a metallic part impact signal in LPMS have used the frequency spectrum. This paper presents a method of using the acceleration signal characteristics for intuitional mass analysis of loose metallic parts. With the method proposed in this paper, because the mass of a metallic part can be understood intuitionally without any special analysis program, intuitional analysis used in parallel with frequency spectrum analysis will be in effect

  19. Acceleration Signal Characteristics for Intuitional Mass Analysis of Metallic Loose Parts

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Kwang-Hyun; Jung, Chang-Gyu [KHNP CRI, Daejeon (Korea, Republic of)

    2016-10-15

    Nuclear power plants (NPPs) have operated LPMS (Loose Parts Monitoring System) for early detection of the possible presence of metallic parts in the reactor coolant system (RCS); however, analysis of the metallic impact wave characteristics in the LPMS is an important issue because information, such as the mass of the metallic part and the impact location, is not provided. Most studies have concentrated on fieldwork using the frequency characteristics for the analysis of the metallic part mass. Thus, the field engineers cannot analyze signals without special software and access to the system. This paper is intended to introduce a process of intuitional mass analysis using the attenuation rate of the acceleration signal and the intervals between peak signals. Most studies related to mass analysis of a metallic part impact signal in LPMS have used the frequency spectrum. This paper presents a method of using the acceleration signal characteristics for intuitional mass analysis of loose metallic parts. With the method proposed in this paper, because the mass of a metallic part can be understood intuitionally without any special analysis program, intuitional analysis used in parallel with frequency spectrum analysis will be in effect.

  20. 75 FR 4963 - Federal Housing Administration (FHA): Hospital Mortgage Insurance Program-Refinancing Hospital Loans

    Science.gov (United States)

    2010-01-29

    ... the existing program requirement. The current downturn in the economy, which has reduced the... refinancing was not as great as was the need for financing for new construction, renovation and rehabilitation... conditioning the refinancing on new construction or renovation. The Section 223(f) refinancing authority as a...

  1. [New Scientific Evidence-based Public Health Guidelines and Practical Manual for Prevention of Sick House Syndrome].

    Science.gov (United States)

    Kishi, Reiko; Yoshino, Hiroshi; Araki, Atsuko; Saijo, Yasuaki; Azuma, Kenichi; Kawai, Toshio; Yamato, Hiroshi; Osawa, Haruki; Shibata, Eiji; Tanaka, Masatoshi; Masuchi, Ayumi; Minatoya, Machiko; Ait Bamai, Yu

    2018-01-01

    Recently, we have published a book containing evidence-based public health guidelines and a practical manual for the prevention of sick house syndrome. The manual is available through the homepage of the Ministry of Health, Labour and Welfare (http://www.mhlw.go.jp/file/06-Seisakujouhou-11130500-Shokuhinanzenbu/0000155147.pdf). It is an almost completely revised version of the 2009 version. The coauthors are 13 specialists in environmental epidemiology, exposure sciences, architecture, and risk communication. Since the 1970s, health problems caused by indoor chemicals, biological pollution, poor temperature control, humidity, and others in office buildings have been recognized as sick building syndrome (SBS) in Western countries, but in Japan it was not until the 1990s that people living in new or renovated homes started to describe a variety of nonspecific subjective symptoms such as eye, nose, and throat irritation, headache, and general fatigue. These symptoms resembled SBS and were designated "sick house syndrome (SHS)." To determine the strategy for prevention of SHS, we conducted a nationwide epidemiological study in six cities from 2003-2013 by randomly sampling 5,709 newly built houses. As a result 1,479 residents in 425 households agreed to environmental monitoring for indoor aldehydes and volatile organic compounds (VOCs). After adjustment for possible risk factors, some VOCs and formaldehyde were dose-dependently shown to be significant risk factors. We also studied the dampness of the houses, fungi, allergies, and others. This book is fully based on the scientific evidence collected through these studies and other newly obtained information, especially from the aspect of architectural engineering. In addition to SHS, we included chapters on recent information about "multi-chemical sensitivity."

  2. Characterisation of the loose sediments used for the 152Eu migration experiments

    International Nuclear Information System (INIS)

    Klotz, D.

    2001-01-01

    The Eu migration experiments were carried out in nonbinding loose sediments of different grain sizes. The five sediments used are characterised on the basis of their grain size distribution, storage and microstructure sizes, hydraulic characteristics as well as some chemical parameters that are required for understanding and modelling the migration experiments [de

  3. Model testing on rainfall-induced landslide of loose soil in Wenchuan earthquake region

    Directory of Open Access Journals (Sweden)

    H. Fang

    2012-03-01

    Full Text Available This study investigates the formation process of rainfall-induced landslide for slopes composed of loose soil in the Wenchuan earthquake region. Experimental investigations have been performed on the landslide's formation and the variation of the controlling soil parameters under various artificial rainfall conditions. The landslide triggering mechanisms can be described in the following way. Firstly, the large porosity of the loose soil facilitated the infiltration of water, which increased the pore water pressure and reduced the shear strength of the soil significantly. In addition, the rainfalls probably caused the concentration of finer particles at a certain depth of the valley slopes. This concentration within the soil increased the pore water pressure significantly, and consequently reduced both the porosity ratio and permeability. Therefore, when the pore water pressure reached a critical state, the effective shear strength of the soil diminished, inducing the landslide's formation.

  4. Soil and minespoil fill as media for renovation of nitrogen and phosphorus in domestic wastewater

    International Nuclear Information System (INIS)

    Peterson, C.E.; Reneau, R.B. Jr.; Hagedorn, C.

    1998-01-01

    Development of US Appalachian coal mining regions has been hampered by lack of domestic waste disposal technologies suited to fills. The suitability of on-site wastewater treatment and disposal systems (OSWTDS) in fill material is uncertain due to the effects of surface mining on soil physical properties. This research evaluated the potential for renovation of N and P present in domestic wastewater by fills from mining operations. N and P were chosen because of their potential adverse environmental impacts. Soil-fill (a mixture of Jefferson, fine-loamy, siliceous, mesic Typic Hapludult and Muskingom, fine-loamy, mixed, mesic Typic Dystrochrept soils) and minespoil (spoil)-fill (blasted rock material associated with the Taggart Marker and Low Splint Bench coal seams of the Upper Middle Wise Formation) were used. Septic tank effluent (STE) and sand filter effluent (SFE) were applied to spoil-fill columns at four loading rates and spoil-fill columns at one loading rate for a period of 20 wk. Renovation of wastewater was assessed by determining the concentration of N and P present in column leachate. Reduction of inorganic N(NO 3 - + NH 4 + ), based on N/Cl ratios ranged from 14.9 to 32.1% after the varying application rates of STE and SFE passed through the soil columns. However, leachate NO 3 - -N concentrations were still above the 10 mg -1 drinking water standard. The quantity of P emerging from the spoil-fill columns (3.0 mg PL -1 ) was higher than anticipated and may be related to the indigenous P present in the minespoil. Sorption of P in the spoil-fill column decreased with increased STE and SFE application (reduction ranged from 99.1 to 74.4%). Results from this study indicate that there is potential for renovating wastewater in OSWTDS in selected soil-fill areas in reclaimed minelands. 33 refs., 2 figs., 4 tabs

  5. Analysis of Solar Energy Use for Multi-Flat Buildings Renovation

    Directory of Open Access Journals (Sweden)

    Kęstutis Valančius

    2016-10-01

    Full Text Available The paper analyses the energy and financial possibilities to install renewable energy sources (solar energy generating systems when renovating multi-flat buildings. The aim is to analyse solar energy system possibilities for modernization of multi-flat buildings (5-storey, 9-storey and 16-storey, providing detailed conclusions about the appropriateness of the energy systems and financial aspects. It is also intended to determine the optimal technological combinations and solutions to reach the maximum energy benefits. For the research computer simulation tools “EnergyPRO” and “PV*SOL Premium” are chosen. Also actual collected heat and electricity consumption data is used for the analysis.

  6. A Model to Assess the Feasibility of Public–Private Partnership for Social Housing

    Directory of Open Access Journals (Sweden)

    Maria Rosaria Guarini

    2017-06-01

    Full Text Available The effects of the world economic and financial crisis, which began in 2007 and is still in progress, has made increasingly sharp the line of demarcation between those able to access home ownership on the free market, and those unable to do so. For the European Union’s member states, Social Housing (SH policies include all the initiatives aimed at providing housing support for all the weak segments of the population; these policies have declined differently by different Member States according to their specific needs. In Italy, the growing need for SH accommodation together with the shortage of public resources makes developing forms of Public–Private Partnership (PPP necessary. Evaluation techniques like Break-Even Analysis and Contribution Margin Analysis are useful in planning interventions including SH initiatives in the context of real estate development or retraining initiatives in PPP (in negotiation processes or in project financing. These kinds of techniques especially allow evaluation of public and private convenience in PPP. In the present work, an assessment procedure has been structured: first the main parameters of a settlement of SH initiative in PPP are defined; subsequently, it is possible to assess the feasibility and the financial balance of the initiative itself. The procedure has been applied to a case study: the interrupted initiative of self-renovation in Via Grotta Perfetta 315 in Rome (Italy.

  7. Export Control Guide: Loose Parts Monitoring Systems for Nuclear Power Plants

    Energy Technology Data Exchange (ETDEWEB)

    Langenberg, Donald W. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2012-12-01

    This report describes a typical LPMS, emphasizing its application to the RCS of a modern NPP. The report also examines the versatility of AE monitoring technology by describing several nuclear applications other than loose parts monitoring, as well as some non-nuclear applications. In addition, LPMS implementation requirements are outlined, and LPMS suppliers are identified. Finally, U.S. export controls applicable to LPMSs are discussed.

  8. EKF-GPR-Based Fingerprint Renovation for Subset-Based Indoor Localization with Adjusted Cosine Similarity.

    Science.gov (United States)

    Yang, Junhua; Li, Yong; Cheng, Wei; Liu, Yang; Liu, Chenxi

    2018-01-22

    Received Signal Strength Indicator (RSSI) localization using fingerprint has become a prevailing approach for indoor localization. However, the fingerprint-collecting work is repetitive and time-consuming. After the original fingerprint radio map is built, it is laborious to upgrade the radio map. In this paper, we describe a Fingerprint Renovation System (FRS) based on crowdsourcing, which avoids the use of manual labour to obtain the up-to-date fingerprint status. Extended Kalman Filter (EKF) and Gaussian Process Regression (GPR) in FRS are combined to calculate the current state based on the original fingerprinting radio map. In this system, a method of subset acquisition also makes an immediate impression to reduce the huge computation caused by too many reference points (RPs). Meanwhile, adjusted cosine similarity (ACS) is employed in the online phase to solve the issue of outliers produced by cosine similarity. Both experiments and analytical simulation in a real Wireless Fidelity (Wi-Fi) environment indicate the usefulness of our system to significant performance improvements. The results show that FRS improves the accuracy by 19.6% in the surveyed area compared to the radio map un-renovated. Moreover, the proposed subset algorithm can bring less computation.

  9. EKF–GPR-Based Fingerprint Renovation for Subset-Based Indoor Localization with Adjusted Cosine Similarity

    Science.gov (United States)

    Yang, Junhua; Li, Yong; Cheng, Wei; Liu, Yang; Liu, Chenxi

    2018-01-01

    Received Signal Strength Indicator (RSSI) localization using fingerprint has become a prevailing approach for indoor localization. However, the fingerprint-collecting work is repetitive and time-consuming. After the original fingerprint radio map is built, it is laborious to upgrade the radio map. In this paper, we describe a Fingerprint Renovation System (FRS) based on crowdsourcing, which avoids the use of manual labour to obtain the up-to-date fingerprint status. Extended Kalman Filter (EKF) and Gaussian Process Regression (GPR) in FRS are combined to calculate the current state based on the original fingerprinting radio map. In this system, a method of subset acquisition also makes an immediate impression to reduce the huge computation caused by too many reference points (RPs). Meanwhile, adjusted cosine similarity (ACS) is employed in the online phase to solve the issue of outliers produced by cosine similarity. Both experiments and analytical simulation in a real Wireless Fidelity (Wi-Fi) environment indicate the usefulness of our system to significant performance improvements. The results show that FRS improves the accuracy by 19.6% in the surveyed area compared to the radio map un-renovated. Moreover, the proposed subset algorithm can bring less computation. PMID:29361805

  10. Sustainable Building Operation

    DEFF Research Database (Denmark)

    Jensen, Jesper Ole

    2009-01-01

    of sustainable building operation and a survey amongst building administrators from the private and the social housing sector. Our results show that there are many good examples on sustainable building operation in Danish housing estates, where local building managers, residents etc. have gained impressive......Energy-savings in the existing building stock have becomes a main goal in national and international policies. Often focus is on building-renovations, whereas the potential of sustainable building operation to a large extent has been neglected. Nevertheless, international research as well...... as practical experiences from Danish housing estates indicates that there are large potentials for energy savings by focusing on the operation of the buildings. We suggest that in order to achieve sustainability in the existing housing, renovation and operations should be seen as integrated parts...

  11. Joint efforts to harmonize sound insulation descriptors and classification schemes in Europe (COST TU0901)

    DEFF Research Database (Denmark)

    Rasmussen, Birgit

    2010-01-01

    Sound insulation descriptors, regulatory requirements and classification schemes in Europe represent a high degree of diversity. One implication is very little exchange of experience of housing design and construction details for different levels of sound insulation; another is trade barriers...... for building systems and products. Unfortunately, there is evidence for a development in the "wrong" direction. For example, sound classification schemes for dwellings exist in nine countries. There is no sign on increasing harmonization, rather the contrary, as more countries are preparing proposals with new......, new housing must meet the needs of the people and offer comfort. Also for existing housing, sound insulation aspects should be taken into account, when renovating housing; otherwise the renovation is not “sustainable”. A joint European Action, COST TU0901 "Integrating and Harmonizing Sound Insulation...

  12. Renewable energy: Political momentum and technology for a sustainable Mexico; Energias Renovables: Impulso politico y tecnologico para un Mexico sustentable

    Energy Technology Data Exchange (ETDEWEB)

    Romero Hernandez, Sergio; Romero Hernandez, Omar; Wood, Duncan [Instituto Tecnologico Autonomo de Mexico (ITAM) (Mexico)

    2011-04-15

    The renewable energy sector in Mexico, as shown in this book, is alive and in good condition, prospers and has great potential. In this regard, it is essential that Mexico sees itself as a country with an energy future beyond Cantarell, beyond Pemex and beyond oil. The future of renewable energy offers great hope for the country and the region, and the time is right for a consensus government, business and social more strongly boost the development of this sector. This book discusses the following topics: Renewable energy and sustainable economic development, the regulatory framework for the use of renewable energy, hydropower, bioenergy, Part I: biomass and biogas, bioenergy, Part II: Liquid biofuels; elements for promotion of wind energy in Mexico, geothermal energy, solar PV, solar thermal and micro. [Spanish] El sector de la energia renovable en Mexico, como se muestra en este libro, esta vivo y en buenas condiciones, prospera y tiene gran potencial. En ese sentido, resulta indispensable que Mexico se vea a si mismo como un pais con un futuro energetico mas alla de Cantarell, mas alla de PEMEX, mas alla del petroleo. El futuro de la energia renovable ofrece una gran esperanza para el pais y la region, y el tiempo es adecuado para que una concertacion gubernamental, empresarial y social impulse con mas fuerza el desarrollo de este sector. En este libro se analizan los siguientes temas: Energias renovables y desarrollo economico sustentable; el marco normativo de la utilizacion de las energias renovables; energia hidroelectrica; bioenergia, parte I: biomasa y biogas; bioenergia, parte II: biocombustibles liquidos; elementos para la promocion de la energia eolica en Mexico; energia geotermica; energia solar fotovoltaica; energia solar termica, y la microgeneracion.

  13. Method for evaluating the system instrumentation for loose part detection in the primary cooling circuit of French PWRs

    International Nuclear Information System (INIS)

    Gerardin, J.P.; Donnette, J.E.

    1995-05-01

    The purpose of the loose part detection system is to trigger an alarm whenever it is warranted, to localize, and to provide information on the type of loose part involved and the damages it may provoke. It is therefore indispensable to have efficient instrumentation, beginning with the sensors which must provide us with a response to all mechanical impacts in natural trapping areas (reactor vessel and steam generator water box). A series of mass- and energy-calibrated impacts have been generated on 45 points in the primary cooling system of a nuclear plant unit in the startup phase. This test provided insights into the relationship between sensor signals and various impact parameters such as velocity of impact or loose part mass. Once these parameters were known, it was possible to define a method for evaluating the detection threshold of sensors depending on the way they are mounted. (author)

  14. Comparison and statistical analysis of long-term overheating indices applied on energy renovated dwellings in temperate climates

    DEFF Research Database (Denmark)

    Psomas, Theofanis Ch.; Heiselberg, Per Kvols; Duer, Karsten

    2018-01-01

    -running’ representative dwellings and characteristic climatic conditions of central Europe (Denmark, United Kingdom, Austria and France). Different renovation steps and passive cooling strategies were applied on these case studies creating 66 variants for comfort assessment. The analyses were conducted with the use...

  15. Las energías renovables como oportunidad y desafío para el desarrollo territorial (Valle de Lerma, Salta – Argentina

    Directory of Open Access Journals (Sweden)

    Silvina Belmonte

    2014-03-01

    Full Text Available La evaluación de Energías Renovables se plantea en un contexto de Ordenamiento Territorial del Valle de Lerma (Salta como estrategia para el desarrollo regional y mejora de la calidad de vida y del ambiente. Herramientas de Evaluación Multi-Criterio, aplicaciones de Sistemas de Información Geográfica y técnicas participativas de consulta constituyen el sustento metodológico del trabajo. Los resultados se focalizan en tres puntos: diagnóstico territorial, evaluación del recurso energético y alternativas tecnológicas, y propuestas para la planificación y gestión. En el diagnóstico, las energías renovables fueron identificadas como opciones viables particularmente en cuestiones productivas y de acceso a servicios básicos. La potencialidad de los recursos renovables resultó alta en relación a la radiación solar y recurso hidráulico, moderado para el potencial eólico y de alta diversidad para el tema de biomasa. Entre las medidas de eficiencia y tecnologías evaluadas, surgieron como prioritarias: educación ambiental, planificación energética estratégica y variadas aplicaciones de energía solar (secaderos, invernaderos, arquitectura bioclimática, colectores de agua y cocinas. Entre las orientaciones para el desarrollo de políticas energéticas ‘más’ sustentables se destacaron: coordinación del sector energético con otros sectores y niveles de actuación en el marco de una planificación territorial integral, fortalecimiento de instituciones locales para la gestión energética, y superación de barreras – limitaciones a la transferencia de energías renovables y medidas de eficiencia energética a nivel local. Finalmente, en las conclusiones se plantea la importancia de valorar las energías renovables como oportunidad y desafío para promover procesos de ‘cambio’ en la región, en una concepción más comprometida con el ambiente y la sociedad.

  16. Confinement of sows 24 h before expected farrowing affects the performance of nest building behaviours but not progress of parturition

    DEFF Research Database (Denmark)

    Hansen, Christian F.; Hales, Janni; Weber, Pernille M.

    2017-01-01

    sows had free access to a straw rack with long stemmed straw and were housed in a freedom farrowing pen with an option of confinement. Loose sows were loose housed throughout the observational period and confined sows were confined from 2 days before expected farrowing until the completion...

  17. Application of GPR Method for Detection of Loose Zones in Flood Levee

    Science.gov (United States)

    Gołębiowski, Tomisław; Małysa, Tomasz

    2018-02-01

    In the paper the results of non-invasive georadar (GPR) surveys carried out for detection of loose zones located in the flood levee was presented. Terrain measurements were performed on the Vistula river flood levee in the village of Wawrzeńczyce near Cracow. In the investigation site, during the flood in 2010, leakages of levee were observed, so detection of inner water filtration paths was an important matter taking into account the stability of the levee during the next flood. GPR surveys had reconnaissance character, so they were carried out with the use of short-offset reflection profiling (SORP) technique and radargrams were subjected to standard signal processing. The results of surveys allowed to outline main loose zone in the levee which were the reason of leakages in 2010. Additionally gravel interbeddings in sand were detected which had an important influence, due to higher porosity of such zones, to water filtration inside of the levee. In the paper three solutions which allow to increase quality and resolution of radargrams were presented, i.e. changeable-polarisation surveys, advanced signal processing and DHA procedure.

  18. Experiments on vibro-impact dynamics of loosely supported tubes under harmonic excitation

    International Nuclear Information System (INIS)

    Axisa, F.; Izquierdo, P.

    1992-01-01

    Computational methods have been recently developed by the authors and others to predict the working life or the acceptable vibration limit of tubular structures experiencing fretting-wear caused by impact-sliding interaction with loose supports or adjacent structures. This problem is of practical interest in various nuclear and other industrial components. This paper reports an experimental work intended to validate the numerical techniques used to compute the tube non-linear vibration in presence of impact-sliding interaction. Attention is especially focused on the local and time averaged dynamical parameters governing the rate of fretting-wear. The experiments were carried out on a straight tube excited harmonically by a pair of electromagnetic shakers. The tube motion was limited by a loose support situated at about midspan. On the other hand, numerical simulations of the tests were also performed. Comparison between test and computational data resulted in rather satisfactory agreement, based on the averaged impact forces and the wear work rate. Results are also discussed in terms of detailed time histories of tube displacement and impact forces

  19. Renewable energies: A real option for the electrical generation in Mexico?; Energias renovables: opcion real para la generacion electrica en Mexico?

    Energy Technology Data Exchange (ETDEWEB)

    Huacuz V, Jorge M. [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)

    2003-07-01

    The renewable energies offer additional benefits to the kilowatts (kW) and kilowatts-hour (kWh) that they produce, because they include the creation of new jobs, a cleaner mean of generation and power assurance, among others. In view of this, most of the countries of the Organization for Economic Cooperation and Development (OECD) and several developing nations have established goals for the renewable energies in their power plans. Many of these countries also have fomented the local development of industries of renewable energy and are penetrating aggressively in this new technology market. [Spanish] Las energias renovables ofrecen beneficios adicionales a los kilowatts (kW) y kilowatts-hora (kWh) que producen, pues incluyen la creacion de nuevos empleos, un medio mas limpio de generacion y seguridad energetica, entre otros. En vista de ello, la mayoria de los paises de la Organizacion de Cooperacion para el Desarrollo Economico (OCDE) y varias naciones en desarrollo han establecido metas para las energias renovables en sus planes energeticos. Muchos de estos paises tambien han fomentado el desarrollo local de industrias de energia renovable y estan penetrando agresivamente en este nuevo mercado de la tecnologia.

  20. Loose Coupling of Wearable-Based INSs with Automatic Heading Evaluation

    OpenAIRE

    Bousdar Ahmed, Dina; Munoz Diaz, Estefania

    2017-01-01

    Position tracking of pedestrians by means of inertial sensors is a highly explored field of research. In fact, there are already many approaches to implement inertial navigation systems (INSs). However, most of them use a single inertial measurement unit (IMU) attached to the pedestrian’s body. Since wearable-devices will be given items in the future, this work explores the implementation of an INS using two wearable-based IMUs. A loosely coupled approach is proposed to combine the outputs of...

  1. Evaluation of cage micro-environment of mice housed on various types of bedding materials.

    Science.gov (United States)

    Smith, Ellen; Stockwell, Jason D; Schweitzer, Isabelle; Langley, Stephen H; Smith, Abigail L

    2004-07-01

    A variety of environmental factors can affect the outcomes of studies using laboratory rodents. One such factor is bedding. Several new bedding materials and processing methods have been introduced to the market in recent years, but there are few reports of their performance. In the studies reported here, we have assessed the cage micro-environment (in-cage ammonia levels, temperature, and humidity) of mice housed on various kinds of bedding and their combinations. We also compared results for bedding supplied as Nestpaks versus loose bedding. We studied C57BL/6J mice (commonly used) and NOD/LtJ mice (heavy soilers) that were maintained, except in one study, in static duplex cages. In general, we observed little effect of bedding type on in-cage temperature or humidity; however, there was considerable variation in ammonia concentrations. The lowest ammonia concentrations occurred in cages housing mice on hardwood bedding or a mixture of corncob and alpha cellulose. In one experiment comparing the micro-environments of NOD/LtJ male mice housed on woodpulp fiber bedding in static versus ventilated caging, we showed a statistically significant decrease in ammonia concentrations in ventilated cages. Therefore, our data show that bedding type affects the micro-environment in static cages and that effects may differ for ventilated cages, which are being used in vivaria with increasing frequency. Copyright 2004 American Association for Laboratory Animal Science

  2. Pre-capacity building in loosely-coupled collaborations: Setting the stage for future initiatives

    Directory of Open Access Journals (Sweden)

    Cheryl A. Hyde

    2012-08-01

    Full Text Available This article examines the benefits and limitations of ‘loosely-coupled’ research collaborations between university faculty and 12 grassroots community-based organisations (CBOs. The authors assert that community-based research projects that develop the knowledge base within CBOs, and can be described as ‘pre-capacity building’ work, can be an important stepping stone to the subsequent development of more formal and strategic capacity-building partnership ventures. However, such projects must be approached carefully with a clear understanding of the ‘threshold dimensions’ that must be met before proceeding with any collaboration. Written as a cautionary tale, the authors identify some of the problems that arise when the threshold stage is poorly executed, and more generally speak to the dangers of initiating even loosely-coupled collaborations in the absence of an explicit and well-established campus commitment to and support for community engagement and partnerships. Keywords: Community capacity-building, community-university partnerships, community research, collaboration

  3. Advanced software tools for digital loose part monitoring systems

    International Nuclear Information System (INIS)

    Ding, Y.

    1996-01-01

    The paper describes two software modules as analysis tools for digital loose part monitoring systems. The first module is called acoustic module which utilizes the multi-media features of modern personal computers to replay the digital stored short-time bursts with sufficient length and in good quality. This is possible due to the so-called puzzle technique developed at ISTec. The second module is called classification module which calculates advanced burst parameters and classifies the acoustic events in pre-defined classes with the help of an artificial multi-layer perception neural network trained with the back propagation algorithm. (author). 7 refs, 7 figs

  4. Advanced software tools for digital loose part monitoring systems

    Energy Technology Data Exchange (ETDEWEB)

    Ding, Y [Institute for Safety Technology (ISTec) GmbH, Garching (Germany)

    1997-12-31

    The paper describes two software modules as analysis tools for digital loose part monitoring systems. The first module is called acoustic module which utilizes the multi-media features of modern personal computers to replay the digital stored short-time bursts with sufficient length and in good quality. This is possible due to the so-called puzzle technique developed at ISTec. The second module is called classification module which calculates advanced burst parameters and classifies the acoustic events in pre-defined classes with the help of an artificial multi-layer perception neural network trained with the back propagation algorithm. (author). 7 refs, 7 figs.

  5. Penetration of the renewable sources of energy in Mexico: group of approach on the possible present and future obstacles for the renewable energies (Annexe 11 in 'A vision of year 2030 on the use of the renewable energies in Mexico'); Penetracion de las fuentes renovables de energia en Mexico: grupo de enfoque sobre los posibles obstaculos actuales y futuros para las energias renovables (Anexo 11 en 'Una vision al 2030 de la utilizacion de las energias renovables en Mexico')

    Energy Technology Data Exchange (ETDEWEB)

    Pernudi, Montserrat; Alonso C, Antonio [Analitica Consultores S.A. de C.V., Mexico D.F. (Mexico)

    2005-08-15

    In this study it is analyzed the possible penetration of the renewable sources of energy in Mexico between today and year 2030. In this project are included as small renewable sources the hydroelectric ones (mini, smaller micro and less than of 20 MW), the geothermal, the solar energy, the wind energy and the biomass. This report corresponds to the results obtained in the group of consultation of experts on the present obstacles and future of the renewable energies in Mexico, made o May 24, 2005 in the Mexico City with a small group of approach that presented the objectives of the project, defined the main present obstacles and the possible future evolution for the penetration of the renewable sources of energy in Mexico. [Spanish] En este estudio se analiza la posible penetracion de las fuentes renovables de energia en Mexico entre hoy y el ano 2030. En dicho proyecto se incluyen como fuentes renovables a las pequenas hidroelectricas (micro y mini, menores de 20 MW), la geotermia, la energia solar, la energia eolica y la biomasa. Este informe corresponde a los resultados obtenidos en el grupo de consulta a expertos sobre los obstaculos presentes y futuros de las energias renovables en Mexico, realizado el 24 de mayo de 2005 en la ciudad de Mexico con un pequeno grupo de enfoque que presento los objetivos del proyecto, definio los principales obstaculos actuales y la posible evolucion futura para la penetracion de las fuentes renovables de energia en Mexico.

  6. Mirror energy difference and the structure of loosely bound proton-rich nuclei around A =20

    Science.gov (United States)

    Yuan, Cenxi; Qi, Chong; Xu, Furong; Suzuki, Toshio; Otsuka, Takaharu

    2014-04-01

    The properties of loosely bound proton-rich nuclei around A =20 are investigated within the framework of the nuclear shell model. In these nuclei, the strength of the effective interactions involving the loosely bound proton s1/2 orbit is significantly reduced in comparison with that of those in their mirror nuclei. We evaluate the reduction of the effective interaction by calculating the monopole-based-universal interaction (VMU) in the Woods-Saxon basis. The shell-model Hamiltonian in the sd shell, such as USD, can thus be modified to reproduce the binding energies and energy levels of the weakly bound proton-rich nuclei around A =20. The effect of the reduction of the effective interaction on the structure and decay properties of these nuclei is also discussed.

  7. Prêt-à-Loger : Zero-energy home with maximum living quality increase

    NARCIS (Netherlands)

    Van den Dobbelsteen, A.A.J.F.

    2015-01-01

    At the Solar Decathlon Europe 2014 (SDE2014) competition (Versailles, France), the team from the Delft University of Technology (TU Delft) took a stance by not constructing a new-built house but demonstrating the energy renovation of a typical Dutch terraced house. Around a quarter of Dutch housing

  8. 75 FR 4100 - Affirmative Fair Housing, Marketing (AFHM) Plan-Multifamily Housing, Affirmative Fair Housing...

    Science.gov (United States)

    2010-01-26

    ... DEPARTMENT OF HOUSING AND URBAN DEVELOPMENT [Docket No. FR-5376-N-01] Affirmative Fair Housing, Marketing (AFHM) Plan-Multifamily Housing, Affirmative Fair Housing Marketing (AFHM) Plan-Single Family Housing and Affirmative Fair Housing Marketing (AFHM) Plan- Cooperatives/Condominiums AGENCY: Office of...

  9. Explorando el hacinamiento en condominios sociales. / Exploring overcrowding in social housing condominiums.

    Directory of Open Access Journals (Sweden)

    Marco Fuentes Maturana

    2012-06-01

    Full Text Available Los condominios sociales,conocidos genéricamente como “block” de departamentos, han ido evidenciando con el paso de los años una serie de deficiencias. Estas se han materializado en ampliaciones irregulares, apropiaciones de terrenos, fallas constructivas, entre varias otras. El presente artículo es parte de una investigación realizada el año 2011, que buscó indagar en los problemas que presenta cierta tipología de condominio social, para posteriormente aportar en la búsqueda de soluciones frente a tales inconvenientes. A continuación, se exponen las principales observaciones rescatadas de dicho proceso, el cual se realizó a través de entrevistas semi estructuradas a habitantes de dos conjuntos sociales de la región metropolitana. Finalmente, y de modo complementario a las conclusiones se reflexiona respecto a ciertas normativas que deberían ser revisadas con el fin de evitar que se repliquen los problemasdetectados en los dos casos de estudio./ Through time, social housing condominiums, commonly known as “apartment blocks”, have evidenced a series of deficiencies that have become tangible through the construction of irregular renovations, the illegal appropriation of sites, the poor quality of the built form, etc. This article is part of a research project, done in 2011, that looked into the problems that the afore mentioned social housing typology presents, in order to propose solutions to them. This article is a synthesis of the fundamental observations retrieved in the research process, done through a series of semi-structured interviews to the inhabitants of two social housing complexes in the Metropolitan Region of Santiago, which concludes with a series of recommendations regarding the revision of the urban regulations that are currently in place.

  10. Renovation of a Mechanical Engineering Senior Design Class to an Industry-Tied and Team-Oriented Course

    Science.gov (United States)

    Liu, Yucheng

    2017-01-01

    In this work, an industry-based and team-oriented education model was established based on a traditional mechanical engineering (ME) senior design class in order to better prepare future engineers and leaders so as to meet the increasing demand for high-quality engineering graduates. In the renovated curriculum, industry-sponsored projects became…

  11. Statics of loose triangular embankment under Nadai’s sand hill analogy

    Science.gov (United States)

    Pipatpongsa, Thirapong; Heng, Sokbil; Iizuka, Atsushi; Ohta, Hideki

    2010-10-01

    In structural mechanics, Nadai's sand hill analogy is the interpretation of an ultimate torque applied to a given structural member with a magnitude that is analogously twice the volume of stable sand heap which can be accommodated on a transverse cross-section basis. Nadai's analogy is accompanied by his observation of a loose triangular embankment, based on the fact that gravitating loose earth is stable if inclined just under the angle of repose. However, Nadai's analysis of stress distribution in a planar sand heap was found to be inaccurate because the total pressure obtained from Nadai's solution is greater than the self-weight calculated from the heap geometry. This raises a question about the validity of his observation in relation to the analogy. To confirm his criterion, this article presents and corrects the error found in Nadai's solution by analyzing a radially symmetric stress field for a wedge-shaped sand heap with the purpose of satisfying both force balance and Nadai's closure. The fundamental equation was obtained by letting the friction state vary as a function of angular position and deduce it under the constraint that the principal stress orientation obeys Nadai's closure. The theoretical solution sufficiently agreed with the past experimental measurements.

  12. The cultural dimension of tightness-looseness: An analysis of situational constraint in Estonia and Greece.

    Science.gov (United States)

    Realo, Anu; Linnamägi, Karmen; Gelfand, Michele J

    2015-06-01

    The importance of tightness-looseness as a dimension that explains a considerable amount of variance between cultures was demonstrated by Gelfand et al. (2011). Tight nations have many strong norms and a low tolerance of deviant behaviour, whereas loose nations have weak social norms and a high tolerance of deviant behaviour. The main aim of the current studies was to examine situational constraint in Estonia and Greece: that is, how the cultural dimension of tightness-looseness is manifested in everyday situations in those two countries. The findings of a questionnaire study (Study 1) suggested that, in general, there is higher constraint across everyday situations in Greece than in Estonia, but situational constraint in Greece is especially strong in school and organisational settings where people have hierarchically structured roles. The results of an observational study (Study 2) revealed a relatively high agreement between appropriateness of certain behaviours as judged by the respondents in Study 1 and the frequencies of observed behaviours in the two countries. Our findings suggest that the strength of situations may substantially vary both within and across cultures, and that the attitudes of the members about situational strength in their respective cultures are in concordance with observations of situations by neutral observers in how people in general behave in their culture. © 2014 International Union of Psychological Science.

  13. The Use of Reference Models in Business Process Renovation

    Directory of Open Access Journals (Sweden)

    Dejan Pajk

    2010-01-01

    Full Text Available Enterprise resource planning (ERP systems are often used by companies to automate and enhance their busi- ness processes. The capabilities of ERP systems can be described by best-practice reference models. The purpose of the article is to demonstrate the business process renovation approach with the use of reference models. Although the use of reference models brings many positive effects for business, they are still rarely used in Slovenian small and medium-sized compa- nies. The reasons for this may be found in the reference models themselves as well as in project implementation methodologies. In the article a reference model based on Microsoft Dynamics NAV is suggested. The reference model is designed using upgraded BPMN notation with additional business objects, which help to describe the models in more detail.

  14. Autonomous houses. Autonomous house

    Energy Technology Data Exchange (ETDEWEB)

    Tanaka, S. (Tokai University, Tokyo (Japan). Faculty of Engineering)

    1991-09-30

    Self-sufficiency type houses are outlined. On condition that people gain a certain amount of income in relation with the society, they self-suffice under the given environment, allowing themselves to accept a minimum of industrial products with small environmental load. Ordinary supply from outside of fossil energy and materials which depend on it is minimized. Types are classified into three: energy, energy materials and perfect self-sufficiency. A study project for environment symbiotic houses is progressing which is planned by the Ministry of Construction and Institute of Building Energy Conservation and is invested by a private company. Its target is making a house for halving an environmental load by CO{sub 2}, for the purpose of creating the environment symbiotic house which is nice to and in harmony with the global environment and human beings. As a part of the studies on energy-saving and resource conservation on houses, introduced is a plan of an autonomous house at Izu-Atagawa. The passive method and high thermal-insulation are used for air conditioning, and hot spring water for hot water supply. Electric power is generated by hydroelectric power generation using mountain streams and by solar cells. Staple food is purchased, while subsidiary food is sufficed. 17 refs., 4 figs., 1 tab.

  15. UNA REVISIÓN A LA REGLAMENTACIÓN E INCENTIVOS DE LAS ENERGÍAS RENOVABLES EN COLOMBIA

    Directory of Open Access Journals (Sweden)

    DIANA CAROLINA ORTIZ MOTTA

    2012-01-01

    Full Text Available El documento analiza las estrategias de: promoción, producción, desarrollo o adaptación de las energías renovables en el país. El desarrollo de esta investigación partió del actual Plan Energético Nacional en lo referente a los lineamientos en materia de política energética. De igual manera se retomaron los programas, las leyes, los planes y los decretos relacionados con la planeación, ejecución y operación de los proyectos energéticos. La investigación realizada permitió concluir que existen leyes e incentivos, principalmente de carácter tributario, que promueven el desarrollo de las energías renovables. Sin embargo, en el país aún se requiere profundizar en estudios que generen cuantificaciones continuas del potencial de implementación de fuentes no convencionales de energía, de manera que se mejoren las políticas energéticas, permitiendo establecer estrategias de largo plazo que involucren los componentes sociales y ambientales.

  16. Loose fusion based on SLAM and IMU for indoor environment

    Science.gov (United States)

    Zhu, Haijiang; Wang, Zhicheng; Zhou, Jinglin; Wang, Xuejing

    2018-04-01

    The simultaneous localization and mapping (SLAM) method based on the RGB-D sensor is widely researched in recent years. However, the accuracy of the RGB-D SLAM relies heavily on correspondence feature points, and the position would be lost in case of scenes with sparse textures. Therefore, plenty of fusion methods using the RGB-D information and inertial measurement unit (IMU) data have investigated to improve the accuracy of SLAM system. However, these fusion methods usually do not take into account the size of matched feature points. The pose estimation calculated by RGB-D information may not be accurate while the number of correct matches is too few. Thus, considering the impact of matches in SLAM system and the problem of missing position in scenes with few textures, a loose fusion method combining RGB-D with IMU is proposed in this paper. In the proposed method, we design a loose fusion strategy based on the RGB-D camera information and IMU data, which is to utilize the IMU data for position estimation when the corresponding point matches are quite few. While there are a lot of matches, the RGB-D information is still used to estimate position. The final pose would be optimized by General Graph Optimization (g2o) framework to reduce error. The experimental results show that the proposed method is better than the RGB-D camera's method. And this method can continue working stably for indoor environment with sparse textures in the SLAM system.

  17. Conformation of an evaluation process for a license renovation solicitude of a nuclear power plant in Mexico

    International Nuclear Information System (INIS)

    Serrano R, M. L.

    2012-10-01

    So that the construction stages, of operation, closing, dismantlement and the radioactive waste disposal of a nuclear power plant (NPP) are carried out in Mexico, is necessary that the operator has a license, permission or authorization for each stage. In Mexico, these licenses, permissions or authorizations are granted by the Energy Secretariat with base in the verdict of the Comision Nacional de Seguridad Nuclear y Salvaguardias (CNSNS). The operation licenses ar the moment effective for the reactors of the Nuclear Power Plant of Laguna Verde (NPP-L V) they will expire respectively in the year 2020 and 2025 for the Unit 1 and Unit 2, for what the CNSNS has begun its preparation before a potential solicitude of the licensee to continue the operation of the NPP-L V. Defining the process to continue and to generate the documents that would help in this phase as normalization, guides, procedures, regulations, controls, etc., is the task that intends to be carried out the regulator body so that the evaluation process is effective and efficient, so much for the same regulator body as for the licensee. This work exposes the advance that the CNSNS has in this aspect and is centered specifically in the conformation of an evaluation process of license renovation solicitude, taking as base what the regulator body of the United States of North America (US NRC) established and following to the IAEA. Also, this work includes statistical of electric power production in Mexico, licensing antecedents for the NPP-L V, a world perspective of the license renovations and the regulation of the US NRC related to the license renovation of a NPP. (Author)

  18. Energy Retrofit Field Study and Best Practices in a Hot-Humid Climate

    Energy Technology Data Exchange (ETDEWEB)

    McIvaine, J.; Sutherland, K.; Martin, E.

    2013-03-01

    Energy efficiency improvement as a component of comprehensive renovation was investigated under U.S. Department of Energy (DOE) funding of the Building America Partnership for Improved Residential Construction (BA-PIRC). Researchers at the Florida Solar Energy Center (FSEC) worked with affordable housing partners renovating foreclosed homes built from the 1950's through the 2000's in the hot-humid climate (within the Southern census region), primarily in Florida. Researchers targeted a 30% improvement in whole-house energy efficiency along with the health and safety, durability, and comfort guidelines outlined in DOE's Builders Challenge Program (Version 1) Quality Criteria.

  19. Transfer of Danish experience and technology. Thermo modernisation and upgrading of housing and its local environment in Poland

    Energy Technology Data Exchange (ETDEWEB)

    Prebensen, K.; Moegelvang, M.; Dybro, P.; Lang, H.H.

    1999-10-01

    There is a great need for upgrading and thermo-modernisation of a large part of the Polish housing stock. In this report the focus is concentrated on upgrading and thermo-renovation of buildings constructed in the 1950`s to the 1970`s. These buildings are characterised by extensive use of prefabricated concrete panels in the facades or massive brick walls. Great numbers of this type of residential building are situated all over Poland. The implementation of energy saving measures - such as installation of modern automation and control equipment and applying external thermal insulation - will result in a number of ecological, social and economic benefits: Reduction in air pollution; Reduction of future increases for cost of household energy consumtion; A convincing improvement of the indoor climate; Creation of an extended market basis for development of a Polish industry supplying, installing and maintaining energy efficient building components. In order to illustrate these benefits for the owners and the tenants the Danish Ministry of Housing and Urban Planning offered to participate in three demonstration projects: Na Skraju Housing Cooperaive, Warsaw. The project focuses on the use of fire-safe, stable and affordable external insulation on a 5-storey housing block and the introduction of a contemporary energy management system. A demonstration building has been insulated, the sub-station has been upgraded to modern standards for energy management. New and much smaller radiators fitted with thermostatic valves and corresponding to the reduced energy requirements have been installed. Heat allocation meters are fitted to the radiators. All piping for space heating and water has been replaced. Energy consumption and indoor climate is now monitored and compared to the results from a neighbouring reference block; Zarzad Budynkow Komunalnych, Warszawa. The project includes the total insulation of facades and roofs as well as replacement of interior piping for heaitng

  20. Performance Analysis of Constrained Loosely Coupled GPS/INS Integration Solutions

    Directory of Open Access Journals (Sweden)

    Fabio Dovis

    2012-11-01

    Full Text Available The paper investigates approaches for loosely coupled GPS/INS integration. Error performance is calculated using a reference trajectory. A performance improvement can be obtained by exploiting additional map information (for example, a road boundary. A constrained solution has been developed and its performance compared with an unconstrained one. The case of GPS outages is also investigated showing how a Kalman filter that operates on the last received GPS position and velocity measurements provides a performance benefit. Results are obtained by means of simulation studies and real data.

  1. Innova House - Ottawa`s advanced house

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-01-31

    A pilot program was developed to provide the housing industry with a means to field test innovative technologies, products and building systems, and to evaluate their overall performance. Under Canada`s Advanced House Program, ten demonstration houses were designed, built and monitored. Ottawa`s Innova House, was one of the ten houses built for this program. The innovative energy saving features of the house included (1) air distribution with small diameter ducts and an electronically commutated motor, a 2.6 kW grid-connected photovoltaic system, (3) an energy recovery ventilator (ERV) with free-cooling mode, (4) a 94 per cent efficient integrated gas heating and hot water system, (5) airtight drywall construction, (6) CFC-free exterior insulation, (7) a natural-gas-engine heat pump for air conditioning, (8) a prototype sealed combustion gas range and clothes dryer, and (9) a manifold plumbing system to conserve water. It was designed to consume one half of the energy consumed in an R-2000 home and one third of the energy of a conventional house. Several of the mechanical elements did not perform at expected levels, (lower than expected efficiencies from the heating and cooling systems and a malfunctioning ERV), nevertheless, overall performance of the house was still very close to the targets. The construction and operation of the house was described. tabs., figs.

  2. Final Environmental Assessment to Renovate Fourth Cliff Recreational Area at Hanscom Air Force Base, Massachusetts

    Science.gov (United States)

    2014-11-17

    Renovate Fourth Cliff Recreational Annex Grading and topography changes may be necessary to design an appropriate drainage system at the site...goals: 1) Increase safety for personnel and patrons at the site; 2) Provide protection of the exposed cliff face from rainwater runoff; 3) Provide...be followed. Drainage design must meet Massachusetts Stormwater Management Standards, as well as comply with the Federal Clean Water Act. Solid

  3. Mechanical behavior of embankments overlying on loose subgrade stabilized by deep mixed columns

    Directory of Open Access Journals (Sweden)

    Morteza Esmaeili

    2016-10-01

    Full Text Available Deep mixed column (DMC is known as one of the effective methods for stabilizing the natural earth beneath road or railway embankments to control stability and settlements under traffic loads. The load distribution mechanism of embankment overlying on loose subgrades stabilized with DMCs considerably depends on the columns' mechanical and geometrical specifications. The present study uses the laboratory investigation to understand the behavior of embankments lying on loose sandy subgrade in three different conditions: (1 subgrade without reinforcement, (2 subgrade reinforced with DMCs in a triangular pattern and horizontal plan, and (3 subgrade reinforced with DMCs in a square pattern and horizontal plan. For this purpose, by adopting the scale factor of 1:10, a reference embankment with 20 cm height, 250 cm length, and 93% maximum dry density achieved in standard Proctor compaction test was constructed over a 70 cm thick loose sandy bed with the relative density of 50% in a loading chamber, and its load-displacement behavior was evaluated until the failure occurred. In the next two tests, DMCs (with 10 cm diameter, 40 cm length, and 25 cm center-to-center spacing were placed in groups in two different patterns (square and triangular in the same sandy bed beneath the embankment and, consequently, the embankments were constructed over the reinforced subgrades and gradually loaded until the failure happened. In all the three tests, the load-displacement behaviors of the embankment and the selected DMCs were instrumented for monitoring purpose. The obtained results implied 64% increase in failure load and 40% decrease in embankment crest settlement when using the square pattern of DMCs compared with those of the reference embankment, while these values were 63% and 12%, respectively, for DMCs in triangular pattern. This confirmed generally better performance of DMCs with a triangular pattern.

  4. Outline of renovation for Mihama Public Relations (PR) Center on atomic power generation and nuclear applications

    Energy Technology Data Exchange (ETDEWEB)

    1983-05-01

    The Mihama PR Center of Kansai Electric Power Co. on atomic power generation and nuclear applications is now under entire renovation. It was constructed accompanying the construction of No. 1 unit in Mihama Nuclear Power Station, and opened in November, 1967, as the only PR facility of open house system. Since then, more than 1.9 million persons visited there in 15 years. Recently the space has become difficult to provide satisfactorily sophisticated exhibits because the importance of nuclear power generation has increased, and the diversified contents have been required. On the other hand, its building was cramped since many rooms were accommodated in the single round building of total area 815 m/sup 2/. In addition, the building has required drastic looking-over because of its deterioration and damages due to aging. The promotion of the understanding for the early securing of nuclear power plant location has been decided as the principal promotion item. The plan includes the modification of the existing building to the exhibition hall only as well as the completion and re-arrangement of the exhibits. It has been determined to construct a new building connected to the existing building, which accommodates a meeting hall, offices, utility machine room, etc., a total area being increased to 1457 m/sup 2/. The fund required is about 600 million yen. The construction work has started on December 1, 1982, aiming at the opening in July, 1983. The meeting hall is designed to seat about 120 persons and to employ multi-screen image techniques.

  5. Housing markets and housing policies in India

    OpenAIRE

    Tiwari, Piyush; Rao, Jyoti

    2016-01-01

    Issues of housing in India are synonymous with ignorance of housing in active government involvement at the policy and program formulation levels. They are also due to the problems that unplanned urbanization, income disparity, poverty, illiteracy, and unemployment brought. These issues extenuated the housing problem, causing a housing shortage of 51 million in 2011. Though India has a long history of establishing policies, programs, and institutions to cater to housing, without allocating ad...

  6. Experiment research of slag renovation in the corner-fired boiler

    Energy Technology Data Exchange (ETDEWEB)

    Gong, Zhijun; Wu, Wenfei [Inner Mongolia Univ. of Science and Technology, Baotou (China). School of Energy and Environment

    2013-07-01

    Aiming at serious slag on the water wall around the burner of corner-fired boiler with low-ash-fusion-point coal, cold experimental model has been established. In this experiment, particle image velocimetry (PIV) has been employed to accurately measure aerodynamic field of burner region, and the experimental research of furnace slag renovation has been conducted through changing the burner jet arrangement. The experiment results show that it has significantly effect on aerodynamic field in the furnace by changing burner jet deflection angle. A reasonable actual tangential circle diameter can be formed through adjusting the burner jet deflection angle, to prevent primary air attacking the wall, and further more, to effectively prevent serious slag on the water wall around the burner.

  7. An approach for heterogeneous and loosely coupled geospatial data distributed computing

    Science.gov (United States)

    Chen, Bin; Huang, Fengru; Fang, Yu; Huang, Zhou; Lin, Hui

    2010-07-01

    Most GIS (Geographic Information System) applications tend to have heterogeneous and autonomous geospatial information resources, and the availability of these local resources is unpredictable and dynamic under a distributed computing environment. In order to make use of these local resources together to solve larger geospatial information processing problems that are related to an overall situation, in this paper, with the support of peer-to-peer computing technologies, we propose a geospatial data distributed computing mechanism that involves loosely coupled geospatial resource directories and a term named as Equivalent Distributed Program of global geospatial queries to solve geospatial distributed computing problems under heterogeneous GIS environments. First, a geospatial query process schema for distributed computing as well as a method for equivalent transformation from a global geospatial query to distributed local queries at SQL (Structured Query Language) level to solve the coordinating problem among heterogeneous resources are presented. Second, peer-to-peer technologies are used to maintain a loosely coupled network environment that consists of autonomous geospatial information resources, thus to achieve decentralized and consistent synchronization among global geospatial resource directories, and to carry out distributed transaction management of local queries. Finally, based on the developed prototype system, example applications of simple and complex geospatial data distributed queries are presented to illustrate the procedure of global geospatial information processing.

  8. Sandboxes, Loose Parts, and Playground Equipment: A Descriptive Exploration of Outdoor Play Environments

    Science.gov (United States)

    Olsen, Heather; Smith, Brandy

    2017-01-01

    The purpose of the study was to examine outdoor environments to understand whether or not young children had access to play materials and loose parts to enhance their playful experiences. This study sought to gather the availability of SAFE and quality play opportunities in early childhood outdoor environments. The study took place in one state of…

  9. 24 CFR 982.608 - Congregate housing: Voucher housing assistance payment.

    Science.gov (United States)

    2010-04-01

    ... Housing Types Congregate Housing § 982.608 Congregate housing: Voucher housing assistance payment. (a... 24 Housing and Urban Development 4 2010-04-01 2010-04-01 false Congregate housing: Voucher housing assistance payment. 982.608 Section 982.608 Housing and Urban Development Regulations Relating to Housing and...

  10. Study of Robust H∞ Filtering Application in Loosely Coupled INS/GPS System

    Directory of Open Access Journals (Sweden)

    Lin Zhao

    2014-01-01

    model, unstable model case is considered. We give an explanation for Kalman filter divergence under uncertain dynamic system and simultaneously investigate the relationship between H∞ filter and Kalman filter. A loosely coupled INS/GPS simulation system is given here to verify this application. Result shows that the robust H∞ filter has a better performance when system suffers uncertainty; also it is more robust compared to the conventional Kalman filter.

  11. Shell closures, loosely bound structures, and halos in exotic nuclei

    International Nuclear Information System (INIS)

    Saxena, G.; Singh, D.

    2013-01-01

    Inspired by the recent experiments indicating doubly magic nuclei that lie near the drip-line and encouraged by the success of our relativistic mean-field (RMF) plus state-dependent BCS approach to the description of the ground-state properties of drip-line nuclei, we develop this approach further, across the entire periodic table, to explore magic nuclei, loosely bound structures, and halo formation in exotic nuclei. In our RMF+BCS approach, the single-particle continuum corresponding to the RMF is replaced by a set of discrete positive-energy states for the calculations of pairing energy. Detailed analysis of the single-particle spectrum, pairing energies, and densities of the nuclei predict the unusual proton shell closures at proton numbers Z = 6, 14, 16, 34, and unusual neutron shell closures at neutron numbers N = 6, 14, 16, 34, 40, 70, 112. Further, in several nuclei like the neutron-rich isotopes of Ca, Zr, Mo, etc., the gradual filling of lowlying single-particle resonant state together with weakly bound single-particle states lying close to the continuum threshold helps accommodate more neutrons but with an extremely small increase in the binding energy. This gives rise to the occurrence of loosely bound systems of neutron-rich nuclei with a large neutron-to-proton ratio. In general, the halo-like formation, irrespective of the existence of any resonant state, is seen to be due to the large spatial extension of the wave functions for the weakly bound single-particle states with low orbital angular momentum having very small or no centrifugal barriers.

  12. Shell closures, loosely bound structures, and halos in exotic nuclei

    Energy Technology Data Exchange (ETDEWEB)

    Saxena, G., E-mail: gauravphy@gmail.com [Govt. Women Engineering College, Department of Physics (India); Singh, D. [University of Rajasthan, Department of Physics (India)

    2013-04-15

    Inspired by the recent experiments indicating doubly magic nuclei that lie near the drip-line and encouraged by the success of our relativistic mean-field (RMF) plus state-dependent BCS approach to the description of the ground-state properties of drip-line nuclei, we develop this approach further, across the entire periodic table, to explore magic nuclei, loosely bound structures, and halo formation in exotic nuclei. In our RMF+BCS approach, the single-particle continuum corresponding to the RMF is replaced by a set of discrete positive-energy states for the calculations of pairing energy. Detailed analysis of the single-particle spectrum, pairing energies, and densities of the nuclei predict the unusual proton shell closures at proton numbers Z = 6, 14, 16, 34, and unusual neutron shell closures at neutron numbers N = 6, 14, 16, 34, 40, 70, 112. Further, in several nuclei like the neutron-rich isotopes of Ca, Zr, Mo, etc., the gradual filling of lowlying single-particle resonant state together with weakly bound single-particle states lying close to the continuum threshold helps accommodate more neutrons but with an extremely small increase in the binding energy. This gives rise to the occurrence of loosely bound systems of neutron-rich nuclei with a large neutron-to-proton ratio. In general, the halo-like formation, irrespective of the existence of any resonant state, is seen to be due to the large spatial extension of the wave functions for the weakly bound single-particle states with low orbital angular momentum having very small or no centrifugal barriers.

  13. Aggressiveness of loose kernel smut isolate from Johnson grass on sorghum line BTx643

    Science.gov (United States)

    An isolate of loose kernel smut obtained from Johnson grass was inoculated unto six BTx643 sorghum plants in the greenhouse to determine its aggressiveness. All the BTx643 sorghum plants inoculated with the Johnson grass isolate were infected. Mean size of the teliospores from the Johnson grass, i...

  14. The Physics of Protoplanetesimal Dust Agglomerates. VIII. Microgravity Collisions between Porous SiO2 Aggregates and Loosely Bound Agglomerates

    International Nuclear Information System (INIS)

    Whizin, Akbar D.; Colwell, Joshua E.; Blum, Jürgen

    2017-01-01

    We performed laboratory experiments colliding 0.8–1.0 mm and 1.0–1.6 mm SiO 2 dust aggregates with loosely bound centimeter-sized agglomerates of those aggregates in microgravity. This work builds on previous microgravity laboratory experiments examining the collisional properties of porous loosely bound dust aggregates. In centimeter-sized aggregates, surface forces dominate self-gravity and may play a large role in aggregate growth beyond this size range. We characterize the properties of protoplanetary aggregate analogs to help place constraints on initial formation mechanisms and environments. We determined several important physical characteristics of these aggregates in a large number of low-velocity collisions. We observed low coefficients of restitution and fragmentation thresholds near 1 m s −1 for 1–2 cm agglomerates, which are in good agreement with previous findings in the literature. We find the accretion efficiency for agglomerates of loosely bound aggregates to be higher than that for just aggregates themselves. We find sticking thresholds of 6.6 ± 2 cm s −1 , somewhat higher than those in similar studies, which have observed few aggregates stick at speeds of under 3 cm s −1 . Even with highly dissipative collisions, loosely bound agglomerates have difficulty accreting beyond centimeter-sized bodies at typical collision speeds in the disk. Our results indicate agglomerates of porous aggregates have slightly higher sticking thresholds than previously thought, allowing possible growth to decimeter-sized bodies if velocities are low enough.

  15. Impact sound insulation improvement of wooden floors on concrete slabs

    DEFF Research Database (Denmark)

    Rasmussen, Birgit; Hoffmeyer, Dan; Hansen, Rói

    2014-01-01

    renovating housing. In Denmark, there are about 1 million dwellings in multi-storey housing. About half of the dwellings are built with timber floors, and the other half with wooden floors on concrete slabs, either in-situ cast or prefabricated hollow-core elements. In a project including mapping of sound......Improvement of impact sound insulation is one of the major challenges, when renovating housing. In Denmark, building regulations for impact sound in new-build were strengthened 5 dB in 2008, implying a main requirement L’n,w ≤ 53 dB between dwellings. The same value should also be a goal, when...... insulation in the Danish housing stock and investigation of improvement possibilities, a pilot laboratory study of wooden floors on concrete was carried out. The laboratory study included impact sound improvement measurements of full-scale samples (10 m2) fulfilling the conditions in EN ISO 10140...

  16. Procedimiento de obtención de materailes multifuncionales y renovables a partir del rechazo de pipa procedente de la producción de aceite de girasol

    OpenAIRE

    Martín-Luengo, María Ángeles; Yates Buxcey, Malcolm; Ramos, M.; Sáez Rojo, Eduardo; González Gil, Lorena; Martínez Serrano, Ana María; Martín-Aranda, Rosa María; Sanz Lázaro, Jesús

    2011-01-01

    Procedimiento de obtención de materiales multifuncionales y renovables a partir del rechazo de pipa procedente de la producción de aceite de girasol. La presente invención se refiere al procedimiento de obtención de materiales renovables, a partir de residuos precedentes de la fabricación de aceite de girasol, para su uso como matrices biocompatibles en ingeniería de tejidos, administración controlada de sustancias de interés biológico (drogas, proteínas, genes, etc...

  17. Socioeconomic Renovation in Viet Nam

    International Development Research Centre (IDRC) Digital Library (Canada)

    The rural development team was focusing on policy and practice change, the urban housing .... Market principles are now accepted as the basis for remunerating labour, ...... In 1992, the total population of Viet Nam was four times that of Malaysia, ...... construction, purchasing, sales, transfers, maintenance and taxation.

  18. Loose excitation-secretion coupling in astrocytes.

    Science.gov (United States)

    Vardjan, Nina; Parpura, Vladimir; Zorec, Robert

    2016-05-01

    Astrocytes play an important housekeeping role in the central nervous system. Additionally, as secretory cells, they actively participate in cell-to-cell communication, which can be mediated by membrane-bound vesicles. The gliosignaling molecules stored in these vesicles are discharged into the extracellular space after the vesicle membrane fuses with the plasma membrane. This process is termed exocytosis, regulated by SNARE proteins, and triggered by elevations in cytosolic calcium levels, which are necessary and sufficient for exocytosis in astrocytes. For astrocytic exocytosis, calcium is sourced from the intracellular endoplasmic reticulum store, although its entry from the extracellular space contributes to cytosolic calcium dynamics in astrocytes. Here, we discuss calcium management in astrocytic exocytosis and the properties of the membrane-bound vesicles that store gliosignaling molecules, including the vesicle fusion machinery and kinetics of vesicle content discharge. In astrocytes, the delay between the increase in cytosolic calcium activity and the discharge of secretions from the vesicular lumen is orders of magnitude longer than that in neurons. This relatively loose excitation-secretion coupling is likely tailored to the participation of astrocytes in modulating neural network processing. © 2015 Wiley Periodicals, Inc.

  19. Knowledge inventory for resource efficiency measures in existing buildings; Kunskapsinventering avseende resurseffektiviserande aatgaerder inom befintlig bebyggelse

    Energy Technology Data Exchange (ETDEWEB)

    Jarnehammar, Anna; Kildsgaard, Ivana; Prejer, Erik

    2011-07-01

    The report summarizes the state of knowledge for various renovation measures of apartment buildings built between 1941-1980. The renovation potential is estimated to give half the energy use for heating and hot water. This efficiency improvement is considered possible, but not likely. There are many case studies of individual projects with theoretical calculations of renovation potential for different measures. There are relatively many general studies of the housing stock in general where the potential for various measures have been calculated for the whole of Sweden, but few studies of actual projects completed. Binding minimum requirements related to the Energy Performance of Buildings Directive (EPBD) for buildings for renovation has been introduced in several other countries in the EU which is also found to contribute to more energy-efficient measures introduced in major renovation projects. The key measures that we have found is the introduction of FTX system, renovation of the building envelope as well as individual metering and billing of heating and hot water.

  20. Housing and Health: The relationship between housing conditions ...

    African Journals Online (AJOL)

    okanlawon

    2011-10-22

    Oct 22, 2011 ... Housing and Health: The relationship between housing ... The authors in chapter one, deal extensively with historical context of housing and health chronologically ... Housing and Health: Time Again for Public Health Action.

  1. El desarrollo de las energías renovables y el paisaje: algunas bases para la implementación de la Convención Europea del Paisaje en la Política energética española

    Directory of Open Access Journals (Sweden)

    Marina Frolova

    2008-01-01

    Full Text Available Desde el inicio del proceso de reforma de la política energética de la Unión Europea, los paisajes emergentes a partir de generación de electricidad con energías renovables suscitan un interés creciente. España se caracteriza por una implantación muy exitosa de las políticas europeas en materia de energías renovables. Sin embargo, la proliferación de aerogeneradores y placas fotovoltaicas en espacios agrícolas o improductivos conlleva la destrucción de numerosos paisajes muy valiosos. Por lo que la nueva sensibilidad hacia los paisajes se está convirtiendo en el mayor obstáculo para el desarrollo de las energías renovables. El objetivo de este artículo es explorar en la relación que se establece entre la implantación de las energías renovables y la evolución de las políticas paisajísticas. Para ello, se analiza el desarrollo que han experimentado las políticas de energías renovables en Europa y en España; se estudian las nuevas formas democráticas de gestión del territorio que plantea la Convención Europea del Paisaje. Por último, se tratan determinados temas de la inclusión del paisaje en las políticas de energías renovables en España, comentando algunos ejemplos en los que se detectan nuevas estrategias en la implantación de proyectos de energías renovables que pueden reducir los impactos sobre el paisaje.

  2. From Loose Groups to Effective Teams: The Nine Key Factors of the Team Landscape.

    Science.gov (United States)

    Sheard, A. G.; Kakabadse, A. P.

    2002-01-01

    A loose group of individuals working on a task differs from an effective team on nine factors: clearly defined goals, priorities, roles and responsibilities, self-awareness, leadership, group dynamics, communications, content, and infrastructure. Ways to eliminate barriers and speed formation of effective teams could be based on those factors.…

  3. Energía renovable e hidrógeno generados in situ para riego y movilidad en viñedos

    Directory of Open Access Journals (Sweden)

    Carroquino Javier

    2017-01-01

    Full Text Available La energía utilizada en agricultura es fuente de emisiones de gases de efecto invernadero. Para reducir las producidas por el uso de gasóleo y electricidad, el proyecto europeo LIFE REWIND aborda el suministro desde fuentes renovables. Para ello, se ha caracterizado la demanda energética y recursos renovables en viñedo y bodega. Se ha buscado el diseño óptimo económico y medioambiental de la generación. Se ha instalado un prototipo en una explotación vitivinícola, con generación fotovoltaica, incluyendo un conjunto flotante sobre una balsa. Esto evita el uso de terreno, reduce la pérdida de agua de la balsa y mejora el rendimiento de los paneles fotovoltaicos. La electricidad producida alimenta la depuración de agua y el bombeo de riego por goteo del viñedo. Con la energía sobrante, un electrolizador produce hidrógeno mediante electrólisis del agua, que es utilizado por un vehículo todoterreno con pila de combustible. Los resultados muestran la viabilidad técnica y económica de los sistemas autónomos de energía renovable para alimentar el riego estacional en los viñedos. Así se evitan las extensiones indiscriminadas de la red y los grupos electrógenos diésel. Adicionalmente se muestra la posibilidad de reemplazar el gasóleo por electricidad o hidrógeno producido en la propia explotación.

  4. El papel de la energía renovable en la competitividad un bosquejo de México

    Directory of Open Access Journals (Sweden)

    Laura Leticia Laurent Martínez

    2016-03-01

    Full Text Available La relación entre la energía y el desarrollo parece incuestionable. Entre más energía y más requerimientos tecnológicos haya que poner en juego para producirla, más avanzados se consideran los países. Sin embargo, los criterios están cambiando aceleradamente, aunque sin las repercusiones esperadas por los defensores de la competitividad. En este artículo se presenta un panorama global del bienestar de los seres vivos mediante la sustitución de las energías provenientes de los fósiles y de la fisión nuclear por energía renovable (er. Se prosigue con una serie de argumentaciones sobre el papel que desempeñan las energías renovables en la competitividad sustentable en relación con la competitividad efímera. Finalizamos con una breve descripción de la posición de México en el renglón de la er, la cual ofrece un marco para una reflexión crítica de las restricciones de la sustentabilidad en México

  5. State-of-the-art study on standards for the restoration of existing buildings; State of the Art Studie 'Standards fuer Sanierungen von Bestandsgebaeuden'. Vorbereitende Studie zum 'Energy and GHG Optimised Building Renovation' new annex proposal - Schlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Cypra, S.

    2009-07-01

    This final report for the Swiss Federal Office of Energy (SFOE) discusses the results of a preliminary study on energy and greenhouse-gas optimised building renovation. The proposals are based on the building standards proposed under the '2000-Watt Society' and 'One-Tonne CO{sub 2} Society' proposals. Comparisons are made with Swiss official building standards as well as Swiss and international standards for zero-energy and passive housing. These standards and requirements are discussed in detail and examples of buildings built to meet them are described. Building standards based on sustainability standards are also discussed and compared. The methodology to be used with respect to single-family homes and apartment blocks is discussed. Finally, knowledge gaps are identified and appropriate literature is listed.

  6. Effect of different brewing times on antioxidant activity and polyphenol content of loosely packed and bagged black teas (Camellia sinensis L.).

    Science.gov (United States)

    Nikniaz, Zeinab; Mahdavi, Reza; Ghaemmaghami, Seyed Jamal; Lotfi Yagin, Neda; Nikniaz, Leila

    2016-01-01

    Determination and comparison of the effect of infusion time on the antioxidant activity and total polyphenol contents of bagged and loosely packed black teas. For twenty loosely packed and eleven bagged tea samples, the antioxidant activity and total polyphenol content were analyzed using FRAP and Folin-Ciocalteau methods, respectively. The ANOVA with Tukey post-hoc test and independent t-test were used for statistical analysis. The antioxidant activity and polyphenol content of various brands of tea samples were significantly different. There were significant differences in the antioxidant activity of loosely packed teas between 5, 15(p=0.03), 30(p=0.02) and 60(p=0.007) minutes of brewing times. Besides, there was a significant difference in antioxidant activity of bagged samples infused for 1 minute with four other infusion time points (pbrewing times (p=0.15). However, in bagged samples, the polyphenol contents of samples that were brewed for 1 minute were significantly lower than samples brewed for 3, 4, and 5 minutes (pbrewing time (p<0.001). The infusion time and the form of tea (loosely packed or bagged) were shown to be important determinants of the antioxidant activity and polyphenol content of black tea infusions in addition to the variety, growing environment and manufacturing conditions.

  7. City of Ljubljana: Its housing, population and housing conditions

    Directory of Open Access Journals (Sweden)

    Maša Filipovič

    2007-01-01

    Full Text Available The article gives an overview of key aspect of housing in Municipality of Ljubljana. The characteristics of households, of housing and their relation influence the housing situation in the city. Characteristic of housing refer mainly to quality of the dwellings, affordability and correspondence to the wishes of the inhabitants. The second important dimensions are households and their characteristics. In Europe and Slovenia increase in number of household can be observed, which in turn are becoming smaller. The housing policy has a role in establishing a balance between households and housing, i.e. ensuring that housing corresponds to the needs of individual households and to their number. For achieving this, knowledge and appropriate data are of vital importance. In the article we present the results of the Housing survey 2005. We observe housing conditions in a comparative perspective (Ljubljana in comparison to Maribor, Slovenia and selected European cities and according to three dimensions: housing fund, households and housing conditions.

  8. Modular and architectural innovation in loosely coupled networks : matching customer requirements, product architecture, and supplier networks

    NARCIS (Netherlands)

    Hofman, Erwin

    2010-01-01

    Collaborative innovation projects that involve suppliers, customers, and sometimes even competitors can be a challenging undertaking. Nonetheless, specialization and organizational loose coupling makes companies increasingly dependent upon resources that are only externally available. This study

  9. Loose anagen hair syndrome with diffuse woolly hair phenotype: A rare association

    Directory of Open Access Journals (Sweden)

    Arshdeep

    2016-01-01

    Full Text Available Loose anagen hair syndrome (LAHS is an underestimated cause of noncicatricial alopecia among children, manifesting as thin, sparse or fine hair. We report a case of LAHS clinically presenting as diffuse woolly hair, an association rarely described in the literature. In addition, we review the clinical as well as genetic link between these two enigmatic hair disorders and hypothesize that both may be associated in a yet unknown manner.

  10. Loose parts, vibration and leakage monitoring methods and systems to increase availability, transparency and lifetime of power plants

    International Nuclear Information System (INIS)

    Streicher, V.; Jax, P.; Ruthrof, K.

    1987-01-01

    This paper deals with three stand-alone-systems as an aid to check the mechanical integrity of the primary circuit of nuclear power plants. The main goals of these systems are early detection of faults and malfunctions, the facilitation of fault clearance, the avoidance of sequential damage and reduction of inspection time and cost. Obviously the proper application of the systems as well as the measures they induce and make possible increase the availability of the plant and contribute to lifetime extension. In order to detect, identify and pinpoint the changes in component structure such as loosened connections, broken parts or components, loose or loosened particles, fatigued materials, cracks and leaks, specialized monitoring systems were developed by KWU (Kraftwerk Union AG) during the last ten years. Requirements concerning vibration, loose parts and leakage monitoring are part of German guidelines and safety standards. Therefore systems for these applications are implemented in most of the nuclear power plants in Western Germany. This paper presents newly developed, microprocessor-based systems for loose parts monitoring, vibration monitoring and leakage monitoring and also includes specific case histories for the different topics

  11. Propuesta del uso de una parte de los fondos Yasuní para la implementación de energía renovable en Ecuador al horizonte 2030.

    OpenAIRE

    Jerez Custode, Marcelo Alejandro

    2012-01-01

    El presente trabajo tiene como principal objetivo dar propuestas para la implementación de energía renovable en el Ecuador con la posibilidad de usar parte de los recursos económicos que obtendría el país por la iniciativa Yasuní ITT. Se espera que el presente estudio sea una guía o incentivo para la creación de sistemas de generación eléctrica usando recursos renovables, ampliando la visión de que en Ecuador la energía limpia es viable.

  12. Energy consultancy services for end-user in the housing sector in Poland. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Lange, M; Prebensen, K

    1996-08-01

    The idea of establishing consulting service schemes is based on the Polish needs to introduce energy saving measures at different levels. In connection with the financing of energy saving measures whether this is carried out through private banks or Energy Saving Companies (ESCOs) there is a need for an institutional component responsible for standardized procedures for appraisal and supervision of energy saving projects. The objective of the project is to reduce the energy consumption in the municipal and housing sector in Warsaw, Gdansk and Katowice, and subsequently implement the results and experience to a large number of other towns in Poland. Education and training of more than thousand energy consultants within a period of 2 years is planned. The fundamental idea of the project is education and training of Polish professionals, who will perform the subsequent training of Polish consultants within the framework of a Polish National Energy Consultant Scheme. A comprehensive compendium (approximately 500 pages) was worked out in English language. The scope of work for the consultant covers all energy aspects in the housing sector: Individual heat generation; Control systems; Heat distribution in the building and local district heating network; Domestic Hot Water; Electricity; Thermal renovation of the Building Envelope; Energy management; Financial aspects and applications for finance of the energy saving measures. The first training course with 41 participants in Poland took place from 4 to 9 December 1995. (EG)

  13. Energy house - dream house

    Energy Technology Data Exchange (ETDEWEB)

    1981-07-01

    An energy house a prefabricated house with an extensive minimization of heat losses, is air-conditioned by means of a combined heating system consisting of hot water cycle and recirculating heating. The energy system is trivalent: wind power, solar energy with heat pumps and normal oil heating.

  14. LMHC/TWRS year 2000 equipment project renovation and contingency plan

    International Nuclear Information System (INIS)

    ADAMS, M.R.

    1999-01-01

    A program has been completed to assess, renovate and document tank farm field equipment year 2000 compliance. A communication plan has also been prepared (see section 8.0). The objective of the program was to assure that no adverse effects occur in tank farm operations as a result of equipment malfunction due to the advent of year 2000. The purposes of this document are to: describe the process used to assess field equipment; document items found to be compliant; document items found to be non-compliant including options for making the equipment year 2000 functional and/or tolerant; describe location and management of field equipment year 2000 documentation; assess overall vulnerability of TWRS field equipment with regard to year 2000 problems and describe plans to communicate year 2000 equipment review results and corrective actions

  15. Design scenarios for renovation of sports complex: a case study

    Science.gov (United States)

    Nižetić, S.

    2018-02-01

    This paper elaborates design scenarios for a sports complex in Croatia from a technical and economic aspect. Different energy options are analysed and two are additionally addressed and discussed as the most viable ones. The possibilities of sports complex renovation are shown by properly choosing the appropriate energy concept and thus reducing the overall cost for produced thermal energy by around 33% and reducing the carbon dioxide emission by a factor of 1.8 in comparison with its present state. Finally, this study presents an example of good practice, where renewable energy solutions can be proposed and where it is possible to cover around 70-80% of overall yearly costs from achieved energy savings for the novel plant that is assumed to be financed through a bank loan.

  16. Discussion on anti-flood renovation of operational nuclear power plants

    International Nuclear Information System (INIS)

    Chen Jiangang; Chen Haiqiao; Zhang Lihan; Wang Sen; Liu Shifeng

    2014-01-01

    The design of nuclear power plants on anti-flood performance was only based on design basis condition in China. The Fukushima nuclear accident revealed the possibility of suffering flood under beyond design basis condition, which caused the continuously deterioration of Fukushima nuclear accident. After the accident, China national nuclear safety regulators proposed new requirements on performance of anti-flood of nuclear power plants. Then, Qinshan Phase II carried out research of anti-flood technology. This paper introduced the background, research and development of anti-flood renovation technology for important safety buildings of Qinshan Phase II, and discussed the necessary for improvement of anti-flood capacity of nuclear power plants and relative measures in China, which is helpful to improve anti-flood performance of operational nuclear power plants and nuclear power plants under construction. (authors)

  17. Life Cycle Thinking and Integrated Product Deliveries in renovation projects: Extending the concept of Integrated Product Deliveries with Product Service Systems

    DEFF Research Database (Denmark)

    Schipull Kauschen, Jan

    2012-01-01

    on renovation projects from Denmark, using different forms of IPDs for façade renovation and discusses the different stakeholder’s perspectives on life cycle thinking and their interests and values regarding sustainable building. Furthermore is the concept of Product Service Systems (PSS) as a valuable...... IPDs with regard to longevity and adaptability. CONCLUSION The new type of service-focused IPD and the related life-cycle responsibility (development, building phase, maintenance and dismantling/adaption/recycling) creates incentive to integrate life cycle thinking into the development process of IPDs......, resulting in more sustainable building solutions with a greater extend of positive environmental, economical and social impacts. The research presented will also show the importance of adaption and configuration of these complex building components by architects and planners, as they will have a great...

  18. In Touch with Industry. ICAF Industry Studies 1999

    Science.gov (United States)

    1999-01-01

    construction management, construction, maintenance, repair, renovation , demolition, removal, and disposal. The infrastructure of the United States...allows the DOD, in some cases, to work with the private sector to build or renovate military housing. A key advantage of the law is that it permits...de Janeiro, Brazil Petroleos de Venezuela S.A. (PdVSA), Lake Maracaibo, Venezuela PdVSA INTEVEP, Caracas, Venezuela Secretaria de Energia , Buenos

  19. Proyectos de energía renovable: su formulación y evaluación económico financiera y situación actual en Argentina

    OpenAIRE

    Pendón, Manuela Mercedes; Williams, Eduardo A.; Crespi, Gabriel; Cibeira, Natalia; Granada, Maite; Filippetti, Belén; Castellazzi, Franco; Couselo, Romina

    2015-01-01

    Los proyectos de energía renovable presentan características particulares, desde el punto de vista de su formulación y evaluación económico – financiera, que resultan importantes conocer y analizar en pos de tomar acertadas decisiones de inversión. En Argentina, la ley 26.190 es el principal instrumento vigente en relación a la promoción de fuentes renovables de energía: eólica, solar, mareomotriz, hidráulica (< 30 MW), biomasa, gases de vertedero, gases de plantas de depuración y biogás. Est...

  20. Close correlation between the reaction mechanism and inner structure of loosely halo-nuclei

    International Nuclear Information System (INIS)

    Liu Jianye; Tianshui Normal Univ., Tianshui; National Laboratory of Heavy Ion Accelerator of Lanzhou, Lanzhou; Guo Wenjun; Ren Zhongzhou; National Laboratory of Heavy Ion Accelerator of Lanzhou, Lanzhou; Xing Yongzhong; National Laboratory of Heavy Ion Accelerator of Lanzhou, Lanzhou

    2006-01-01

    It was based on the comparisons of the variance properties of fragment multiplicities FM's and nuclear stoppings R's for the neutron-halo colliding system with those of FZ's and R's for the proton-halo colliding system with the increases of beam energy in more detail, the closely correlations between the reaction mechanism and the inner structures of halo-nuclei is found. From above comparisons it is found that the variance properties of fragment multiplicities and nuclear stopping with the increases of beam energy are quite different for the neutron-halo and proton halo colliding systems, such as the effects of loosely bound neutron-halo structure on the fragment multiplicities and nuclear stopping are obviously larger than those for the proton-halo colliding system. This is due to that the structures of halo-neutron nucleus 11 Li is more loosely than that of the proton-halo nucleus 23 Al. In this case, the fragment multiplicity and nuclear stopping of halo nuclei may be used as a possible probe for studying the reaction mechanism and the correlation between the reaction mechanism and the inner structure of halo-nuclei. (authors)