WorldWideScience

Sample records for renovated command module

  1. Apollo 11 Command Service Module

    Science.gov (United States)

    1969-01-01

    A close-up view of the Apollo 11 command service module ready to be mated with the spacecraft LEM adapter of the third stage. The towering 363-foot Saturn V was a multi-stage, multi-engine launch vehicle standing taller than the Statue of Liberty. Altogether, the Saturn V engines produced as much power as 85 Hoover Dams.

  2. Command and Service Module Communications

    Science.gov (United States)

    Interbartolo, Michael

    2009-01-01

    This viewgraph presentation examines Command and Service Module (CSM) Communications. The communication system's capabilities are defined, including CSM-Earth, CSM-Lunar Module and CSM-Extravehicular crewman communications. An overview is provided for S-band communications, including data transmission and receiving rates, operating frequencies and major system components (pre-modulation processors, unified S-band electronics, S-band power amplifier and S-band antennas). Additionally, data transmission rates, operating frequencies and the capabilities of VHF communications are described. Major VHF components, including transmitters and receivers, and the VHF multiplexer and antennas are also highlighted. Finally, communications during pre-launch, ascent, in-flight and entry are discussed. Overall, the CSM communication system was rated highly by flight controllers and crew. The system was mostly autonomous for both crew and flight controllers and no major issues were encountered during flight.

  3. Astronaut John Young in Command Module Simulator during Apollo Simulation

    Science.gov (United States)

    1968-01-01

    Astronaut John W. Young, command module pilot, inside the Command Module Simulator in bldg 5 during an Apollo Simulation. Astronauts Thomas P. Stafford, commander and Eugene A. Cernan, lunar module pilot are out of the view.

  4. Three astronauts inside Command Module Simulator during Apollo Simulation

    Science.gov (United States)

    1968-01-01

    Three astronauts inside the Command Module Simulator in bldg 5 during an Apollo Simulation. Left to right are Astronauts Thomas P. Stafford, commander; John W. Young, command module pilot; and Eugene A. Cernan, lunar module pilot.

  5. Apollo 16 astronauts in Apollo Command Module Mission Simulator

    Science.gov (United States)

    1972-01-01

    Astronaut Thomas K. Mattingly II, command module pilot of the Apollo 16 lunar landing mission, participates in extravehicular activity (EVA) training in bldg 5 at the Manned Spacecraft Center (MSC). In the right background is Astronaut Charles M. Duke Jr., lunar module pilot. They are inside the Apollo Command Module Mission Simulator (31046); Mattingly (right foreground) and Duke (right backgroung) in the Apollo Command Module Mission Simulator for EVA simulation and training. Astronaut John W. Young, commander, can be seen in the left background (31047).

  6. Apollo 10 astronauts in space suits in front of Command Module

    Science.gov (United States)

    1968-01-01

    Three astronauts named as the prime crew of the Apollo 10 space mission. Left to right, are Eugene A. Cernan, lunar module pilot; John W. Young, command module pilot; and Thomas P. Stafford, commander.

  7. Counting addressing method: Command addressable element and extinguishing module

    Directory of Open Access Journals (Sweden)

    Ristić Jovan D.

    2009-01-01

    Full Text Available The specific requirements that appear in addressable fire detection and alarm systems and the shortcomings of the existing addressing methods were discussed. A new method of addressing of detectors was proposed. The basic principles of addressing and responding of a called element are stated. Extinguishing module is specific subsystem in classic fire detection and alarm systems. Appearing of addressable fire detection and alarm systems didn't caused essential change in the concept of extinguishing module because of long calling period of such systems. Addressable fire security system based on counting addressing method reaches high calling rates and enables integrating of the extinguishing module in addressable system. Solutions for command addressable element and integrated extinguishing module are given in this paper. The counting addressing method was developed for specific requirements in fire detection and alarm systems, yet its speed and reliability justifies its use in the acquisition of data on slowly variable parameters under industrial conditions. .

  8. Location of Microbial Ecology Evaluation Device in Apollo Command Module

    Science.gov (United States)

    1971-01-01

    The location of the Microbial Ecology Evaluation Device (MEED) installed on the open hatch of the Apollo Command Module is illustrated in this photograph. The MEED, equipment of the Microbial Response in Space Environment experiment, will house a selection of microbial systems. The MEED will be deployed during the extravehicular activity on the transearth coast phase of the Aopllo 16 lunar landing mission. The purpose of the experiment will be to measure the effects of certain space environmental parameters on the microbial test systems.

  9. ASTP crewmen in Apollo Command Module Trainer during training session at JSC

    Science.gov (United States)

    1975-01-01

    The three members of the American ASTP prime crew are photographed inside the Apollo Command Module (CM) trainer in a water tank in bldg 260 during water egress training at JSC. They are, left to right, Astronauts Thomas P. Stafford, commander; Vance D. Brand, command module pilot; and Donald K. Slayton, docking module pilot (23430); Slayton attaches his life preserver as he egresses an Apollo Command Module trainer in a water tank in bldg 260 during water egresss training at JSC. Astronauts Brand (on left) and Stafford have already egressed the trainer and are seated in a three-man life raft.

  10. Apollo Spacecraft 012 Command/Service Module being moved to Operations bldg

    Science.gov (United States)

    1967-01-01

    Transfer of Apollo Spacecraft 012 Command/Service Module for mating to the Saturn Lunar Module Adapter No. 05 in the Manned Spacecraft Operations bldg. S/C 012 will be flown on the Apollo/Saturn 204 mission.

  11. The Integrated Renovation Process

    DEFF Research Database (Denmark)

    Galiotto, Nicolas; Heiselberg, Per; Knudstrup, Mary-Ann

    The Integrated Renovation Process (IRP) is a user customized methodology based on judiciously selected constructivist and interactive multi-criteria decision making methods (Galiotto, Heiselberg, & Knudstrup, 2014 (expected)). When applied for home renovation, the Integrated Renovation Process...

  12. Solar renovation demonstration projects

    Energy Technology Data Exchange (ETDEWEB)

    Bruun Joergensen, O [ed.

    1998-10-01

    In the framework of the IEA SHC Programme, a Task on building renovation was initiated, `Task 20, Solar Energy in Building Renovation`. In a part of the task, Subtask C `Design of Solar Renovation Projects`, different solar renovation demonstration projects were developed. The objective of Subtask C was to demonstrate the application of advanced solar renovation concepts on real buildings. This report documents 16 different solar renovation demonstration projects including the design processes of the projects. The projects include the renovation of houses, schools, laboratories, and factories. Several solar techniques were used: building integrated solar collectors, glazed balconies, ventilated solar walls, transparent insulation, second skin facades, daylight elements and photovoltaic systems. These techniques are used in several simple as well as more complex system designs. (au)

  13. Existing Sustainable Renovation Concepts

    DEFF Research Database (Denmark)

    Tommerup, Henrik M.; Vanhoutteghem, Lies; Gustavsson, Leif

    The Nordic single-family house renovation market is dominated by a craftsman based approach with individual solutions, traditional warehouses ”do-it-yourself-shops” and some actors marketing single products. To speed up the implementation of sustainable renovation of single-family houses there is......The Nordic single-family house renovation market is dominated by a craftsman based approach with individual solutions, traditional warehouses ”do-it-yourself-shops” and some actors marketing single products. To speed up the implementation of sustainable renovation of single-family houses...

  14. The Integrated Renovation Process

    DEFF Research Database (Denmark)

    Galiotto, Nicolas; Heiselberg, Per; Knudstrup, Mary-Ann

    2015-01-01

    the project stakeholders to overcome most informational barriers to sustainable home renovation such as lack of knowledge, lack of interest, lack of support, and lack of social and emotional understanding. The homeowners were able to perceive the new and numerous qualities they were getting in their newly......The potential for primary energy savings is greatest in the building sector. A very relevant way to save energy is to increase the rates and depths of building renovations. In order to reach such goals, building owners need to be convinced to invest in high-performance sustainable renovation...

  15. Statistics concerning the Apollo command module water landing, including the probability of occurrence of various impact conditions, sucessful impact, and body X-axis loads

    Science.gov (United States)

    Whitnah, A. M.; Howes, D. B.

    1971-01-01

    Statistical information for the Apollo command module water landings is presented. This information includes the probability of occurrence of various impact conditions, a successful impact, and body X-axis loads of various magnitudes.

  16. The Integrated Renovation Process

    DEFF Research Database (Denmark)

    Galiotto, Nicolas; Heiselberg, Per; Knudstrup, Mary-Ann

    they get more time for the cost optimization and the qualitative analysis of the users’ needs and behaviours. In order to reach a fossil free energy building stock within an acceptable time frame, it is primordial that researchers, politicians and the building industry work hand in hand. Indeed, in order...... to overcome the financial barriers to energy renovation and bring a new type of building experts in the building renovation sector, cost optimization tools for building renovation have been and can be developed but new legislation and politico-economic supports are still much needed. We present in this report...... a new contribution from the research and industry sides and results reached with the newly developed methodology, but without a significant contribution from the politico-economic and legislation sides . The experiences met during application of the Integrated Renovation Process are described...

  17. Renovation of social housing

    DEFF Research Database (Denmark)

    Jensen, Stina Rask; Hvejsel, Marie Frier; Kirkegaard, Poul Henning

    consumption in the building sector. This planned transformation towards a more energy-efficient building mass involves changes in the building envelope and, as such, is likely to influence the experience of the built environment dramatically, both interior and exterior. Recent research shows, however...... in the renovation of social housing. Methodologically, this hypothesis is investigated by re-reading the task of energy renovation through the lens of tectonic architectural theory. Specifically, Eduard Sekler’s etymological distinction between structure, construction, and tectonics is developed as a framework...... for addressing the spatial implications and potentials of technical initiatives in contemporary energy renovations within the continuum described by Scott. The framework is applied in two case studies of recent energy renovations of social housing dwellings. Finally, the paper discusses whether the technical...

  18. Integrated Renovation Process

    DEFF Research Database (Denmark)

    Galiotto, Nicolas; Heiselberg, Per; Knudstrup, Mary-Ann

    2016-01-01

    renovation to be overcome. The homeowners were better integrated and their preferences and immaterial values were better taken into account. To keep the decision-making process economically viable and timely, the process as known today still needs to be improved, and new tools need to be developed....... This paper presents a new scheme: the integrated renovation process. One successful case study is introduced, and recommendations for future developments needed in the field are provided....

  19. The Integrated Renovation Process

    DEFF Research Database (Denmark)

    Galiotto, Nicolas

    and constructivist multiple criteria decision-making analysis method is selected for developing the work further. The method is introduced and applied to the renovation of a multi-residential historic building. Furthermore, a new scheme, the Integrated Renovation Process, is presented. Finally, the methodology...... is applied to two single-family homes. In practice, such a scheme allowed most informational barriers to sustainable home renovation to be overcome. The homeowners were better integrated and their preferences and immaterial values were better taken into account. They assimilated the multiple benefits...... to keep the decision making process economically viable and timely, the process still needs to be improved and new tools need to be developed....

  20. Design development of the Apollo command and service module thrust vector attitude control systems

    Science.gov (United States)

    Peters, W. H.

    1978-01-01

    Development of the Apollo thrust vector control digital autopilot (TVC DAP) was summarized. This is the control system that provided pitch and yaw attitude control during velocity change maneuvers using the main rocket engine on the Apollo service module. A list of ten primary functional requirements for this control system are presented, each being subordinate to a more general requirement appearing earlier on the list. Development process functions were then identified and the essential information flow paths were explored. This provided some visibility into the particular NASA/contractor interface, as well as relationships between the many individual activities.

  1. Overheating assessment of energy renovations

    DEFF Research Database (Denmark)

    Psomas, Theofanis Ch.; Heiselberg, Per Kvols; Duer, Karsten

    2016-01-01

    In many post-occupancy studies of renovated houses elevated temperatures have been documented. This article presents in which situations overheating need to be addressed and which renovation measures are causing this need. The analysis contains representative houses from central and north Europe...

  2. CEBAF Control Room Renovation

    International Nuclear Information System (INIS)

    Michael Spata; Anthony Cuffe; Thomas Oren

    2005-01-01

    The Machine Control Center (MCC) at Jefferson Lab's Continuous Electron Beam Accelerator Facility (CEBAF) was constructed in the early 1990s and based on proven technology of that era. Through our experience over the last 15 years and in our planning for the facilities 12 GeV upgrade we reevaluated the control room environment to capitalize on emerging visualization and display technologies and improve on work-flow processes and ergonomic attributes. The renovation was performed in two phases during the summer of 2004, with one phase occurring during machine operations and the latter, more extensive phase, occurring during our semi-annual shutdown period. The new facility takes advantage of advances in display technology, analog and video signal management, server technology, ergonomic workspace design, lighting engineering, acoustic ceilings and raised flooring solutions to provide a marked improvement in the overall environment of machine operations

  3. CEBAF Control Room Renovation

    International Nuclear Information System (INIS)

    Michael Spata; Thomas Oren

    2005-01-01

    The Machine Control Center (MCC) at Jefferson Lab's Continuous Electron Beam Accelerator Facility (CEBAF) was initially constructed in the early 1990s and based on proven technology of that era. Through our experience over the last 15 years and in our planning for the facility's 12 GeV upgrade we reevaluated the control room environment to capitalize on emerging visualization and display technologies and improve workflow processes and ergonomic attributes. This effort also sets the foundation for the redevelopment of the accelerator's control system to deliver high reliability performance with improvements in beam specifications management and information flow. The complete renovation was performed over a three-week maintenance period with no interruption to beam operations. We present the results of this effort

  4. CEBAF Control Room Renovation

    International Nuclear Information System (INIS)

    Michael Spata; Thomas Oren

    2005-01-01

    The Machine Control Center at Jefferson Lab's Continuous Electron Beam Accelerator Facility was initially constructed in the early 1990s and based on proven technology of that era. Through our experience over the last 15 years and in our planning for the facilities 12 GeV upgrade we reevaluated the control room environment to capitalize on emerging visualization and display technologies and improve on workflow processes and ergonomic attributes. This effort also sets the foundation for the redevelopment of the accelerator's control system to deliver high reliability performance with improvements in beam specifications management and information flow. The complete renovation was performed over a three-week period with no interruption to beam operations. We present the results of this effort

  5. Extensive renovation the pathology of heritage building

    DEFF Research Database (Denmark)

    Rasmussen, Torben Valdbjørn

    2015-01-01

    The pathology of heritage buildings is often related to renovation initiatives typically initiated by implementing energy savings measures.......The pathology of heritage buildings is often related to renovation initiatives typically initiated by implementing energy savings measures....

  6. Extensive renovation the pathology of heritage buildings

    DEFF Research Database (Denmark)

    Rasmussen, Torben Valdbjørn

    2015-01-01

    The pathology of heritage buildings is often related to renovation initiatives typically initiated by implementing energy savings measures.......The pathology of heritage buildings is often related to renovation initiatives typically initiated by implementing energy savings measures....

  7. The Optimal Time of Renovating a Mall

    OpenAIRE

    K.C. Wong; George Norman

    1994-01-01

    This paper presents a maximization model determining the optimal time at which a mall should be renovated. The analysis is constructed on the assumption of a decreasing rental income over time as a mall ages. It is then shown that the optimal renovation period achieves a balance between the marginal cost and benefits of delaying renovation. We show how this balance is affected by changes in the discount rate, net rental incomes, and renovation costs. Numerical simulations are used to demonstr...

  8. Command World

    National Research Council Canada - National Science Library

    Wong, Leah Y; Lange, Douglas S; Sebastyn, Jerome T; Roof, William H

    2006-01-01

    .... The Command World scenario was expressly designed as a crisis action planning exercise in order to replicate the communications, collaboration, and information requirements inherent in a military...

  9. The renovated Almaraz is profitable

    International Nuclear Information System (INIS)

    Vehkanen, S.; Vaelisuo, M.

    2001-01-01

    The Almaraz power plant is situated in the Province of Extremadura in southwestern Spain. In the plant there are two pressurised water reactors that are delivered by Westinghouse and commissioned in the beginning of 1980's. In mid 1990's major renovations were made by Siemens. The plant is very profitable, says plant manager Araluce. The richness of the living nature in the area surrounding the power plant was emphasized in the oral and written presentations. (author)

  10. Renovation work at Restaurant 1

    CERN Multimedia

    2006-01-01

    Due to the age of the present kitchen and freeflow installations in Restaurant 1, essential renovation work is due to be carried out. The work is scheduled to last from September 2006 to May 2007. Work on the self-service area of the restaurant will commence in November. Every effort will be made to minimise the inconvenience caused to users of the restaurant and we thank you in advance for your co-operation during this period.

  11. Renovation works at Restaurant 1

    CERN Document Server

    2006-01-01

    Due to the age of the present kitchen and freeflow installations in Restaurant 1, essential renovations are due to be carried out. The planned period for this project is September 2006 to May 2007. Work on the self-service area of the restaurant will commence in November. Every effort will be made to minimise the inconvenience caused to users of the restaurant and we thank you in advance for your co-operation during this period.

  12. How to Successfully Renovate a Controls System? - Lessons Learned from the Renovation of the CERN Injectors’ Controls Software

    CERN Document Server

    Kruk, G; Kulikova, O; Lezhebokov, V; Pace, M; Pera Mira, P; Roux, E; Wozniak, J Pawel

    2014-01-01

    Renovation of the control system of the CERN LHC injectors was initiated in 2007 in the scope of the Injector Controls Architecture (InCA) project. One of its main objectives was to homogenize the controls software across CERN accelerators and reuse as much as possible the existing modern sub-systems, such as the settings management used for the LHC. The project team created a platform that would permit coexistence and intercommunication between old and new components via a dedicated gateway, allowing a progressive replacement of the former. Dealing with a heterogeneous environment, with many diverse and interconnected modules, implemented using different technologies and programming languages, the team had to introduce all the modifications in the smoothest possible way, without causing machine downtime. After a brief description of the system architecture, the paper discusses the technical and non-technical sides of the renovation process such as validation and deployment methodology, operational applicatio...

  13. Promotion of Sustainable Renovation in Europe

    DEFF Research Database (Denmark)

    Fokaides, Paris A.; Kanarachos, Andreas; Kanarachos, Georgette

    2013-01-01

    pressing the energy renovation of buildings. Both the obstacles and the contribution of national regulations will be discussed, towards promotion of sustainable renovation in Europe today. This study is also expected to report on research initiatives currently being undertaken in Europe on the energy...

  14. Renovate Right: Prevent Lead Poisoning in Children

    Centers for Disease Control (CDC) Podcasts

    In this podcast, Dr. Maria Doa, Director of the Environmental Protection Agency's (EPA) National Program Chemicals Division, discusses EPA's new rule for renovations, repairs, and painting activities. The new rule includes information on lead-safe work practices when conducting renovations, repairs, and painting in pre-1978 homes and schools to prevent the spread of lead dust.

  15. Restaurant No. 1 fully renovated

    CERN Document Server

    2007-01-01

    The Restaurant No. 1 team. After several months of patience and goodwill on the part of our clients, we are delighted to announce that the major renovation work which began in September 2006 has now been completed. From 21 May 2007 we look forward to welcoming you to a completely renovated restaurant area designed with you in mind. The restaurant team wishes to thank all its clients for their patience and loyalty. Particular attention has been paid in the new design to creating a spacious serving area and providing a wider choice of dishes. The new restaurant area has been designed as an open-plan space to enable you to view all the dishes before making your selection and to move around freely from one food access point to another. It comprises user-friendly areas that fully comply with hygiene standards. From now on you will be able to pick and choose to your heart's content. We invite you to try out wok cooking or some other speciality. Or select a pizza or a plate of pasta with a choice of two sauces fr...

  16. Building renovations in BIM systems

    Directory of Open Access Journals (Sweden)

    Smutný Marian

    2018-01-01

    Full Text Available Renovation of buildings is a demanding challenge for computer systems. Nowadays, complex 3D models of historic buildings can be scanned and modelled, including sculptural filigrees and stucco decorations with possibility to generate different projections, cross-sections and elevations according to descriptive geometry rules. However, all of this falls within the field of “3D Modelling”. BIM systems work with elements that have to be classified according to their purpose, or according to the way they are realized. The system is then able to sort, filter or group them. Also, it is able to compute their bill of quantity and quality based on their attributes. Last but not least, it has to be able to schematically display civil engineering drawings on the basis of classification of the elements which differ considerably from the display of descriptive geometry. In regular constructions, repeatability and predictability of the links between the elements suit computer systems. Thus, the issue of building renovations in BIM systems is to find a balance between modelling irregular constructions and irregular space arrangements, while maintaining the ability to interact with other BIM elements.

  17. An integrated urban drainage system model for assessing renovation scheme.

    Science.gov (United States)

    Dong, X; Zeng, S; Chen, J; Zhao, D

    2012-01-01

    Due to sustained economic growth in China over the last three decades, urbanization has been on a rapidly expanding track. In recent years, regional industrial relocations were also accelerated across the country from the east coast to the west inland. These changes have led to a large-scale redesign of urban infrastructures, including the drainage system. To help the reconstructed infrastructures towards a better sustainability, a tool is required for assessing the efficiency and environmental performance of different renovation schemes. This paper developed an integrated dynamic modeling tool, which consisted of three models for describing the sewer, the wastewater treatment plant (WWTP) and the receiving water body respectively. Three auxiliary modules were also incorporated to conceptualize the model, calibrate the simulations, and analyze the results. The developed integrated modeling tool was applied to a case study in Shenzhen City, which is one of the most dynamic cities and facing considerable challenges for environmental degradation. The renovation scheme proposed to improve the environmental performance of Shenzhen City's urban drainage system was modeled and evaluated. The simulation results supplied some suggestions for the further improvement of the renovation scheme.

  18. Renovation of historic, protected buildings in Geneva

    Energy Technology Data Exchange (ETDEWEB)

    Weber, W.; Haefeli, P.

    2009-07-01

    This report for the Swiss Federal Office of Energy (SFOE) reports on work done within the IEA Solar Heating and Cooling Program's Task 37. The objective of SHC Task 37 is to develop a solid knowledge base on how to renovate housings to a very high energy standard and how to develop strategies that support the market penetration of such renovation methods. The report deals with four listed buildings of historical value in Geneva, Switzerland, and examines various aspects of the renovation. These aspects include a discussion of the techniques applied, including internal and external insulation. Simulation methods used and results obtained are discussed. The improvements made are evaluated.

  19. Energy renovation solutions - catalogue; Energirenoveringstiltag - katalog

    Energy Technology Data Exchange (ETDEWEB)

    Tommerup, H.

    2010-07-15

    The project's aim has been to develop methods and examples of extensive energy renovations to stimulate energy conservation and increased use of renewable energy in existing buildings. The current report represents an extensive technology catalogue of typical energy renovation measures in connection with the renovation of existing buildings. For every action the main aspects are explained concerning such issues as technology, use, barriers, indoor climate, energy conservation and prices. The report is mainly targeted at construction industry, but also many other stakeholders can benefit from the report. (ln)

  20. Analysis of promising sustainable renovation concepts

    DEFF Research Database (Denmark)

    Vanhoutteghem, Lies; Tommerup, Henrik M.; Svendsen, Svend

    This report focuses on analyses of the most promising existing sustainable renovation concepts, i.e. full-service concepts and technical concepts, for single-family houses. As a basis for the analyses a detailed building stock analysis was carried out. Furthermore, as a basis a general working...... method for proposals on package solutions for sustainable renovation was described. The method consists of four steps, going from investigation of the house to proposal for sustainable renovation, detailed planning and commissioning after renovation. It could be used by teams of consultants...... of the building envelope and the electricity required to run the system. Positive impact on the indoor environment can be expected. Thermal comfort will be improved by insulation and air-tightness measures that will increase surface temperatures and reduce draught from e.g. badly insulated windows. A ventilation...

  1. Collaboration opportunities in advanced housing renovation

    DEFF Research Database (Denmark)

    Mlecnik, Erwin; Kondratenko, Irena; Cré, Johan

    2012-01-01

    demand for integrated renovations has to be stimulated. A research and networking methodology was developed within the framework of the One Stop Shop project to identify and develop collaboration opportunities for advanced housing renovation in Belgium, Denmark, Finland and Norway. The research...... identified key supply-side needs through interviews and questionnaires, and analysed important elements for the development of a web-based portal that can connect supply and demand. The project further developed ideas and methods for collaboration and business model generation between different players...... on the renovation market. These different research results contributed to defining new business opportunities related to process innovation to unburden the homeowner and to achieve less fragmented renovation processes...

  2. Funding of Facility Repairs and Renovation.

    Science.gov (United States)

    Kaiser, Harvey H.

    1984-01-01

    Compares the life cycle approach for campus building repair and renovation to the University of California's comprehensive building maintenance formula and advises that formulas be used cautiously as a method of determining appropriate budget levels. (MLF)

  3. Renovate Right: Prevent Lead Poisoning in Children

    Centers for Disease Control (CDC) Podcasts

    2008-10-02

    In this podcast, Dr. Maria Doa, Director of the Environmental Protection Agency's (EPA) National Program Chemicals Division, discusses EPA's new rule for renovations, repairs, and painting activities. The new rule includes information on lead-safe work practices when conducting renovations, repairs, and painting in pre-1978 homes and schools to prevent the spread of lead dust.  Created: 10/2/2008 by National Center for Environmental Health (NCEH).   Date Released: 10/2/2008.

  4. Interactive Configuration of High Performance Renovation of Apartment Buildings by the use of CSP

    DEFF Research Database (Denmark)

    Vareilles, E.; Thuesen, Christian; Falcon, M.

    2013-01-01

    of mid-rise (up to seven stories) apartment buildings. The renovation is based on external rectangular panels, always comprising insulation and cladding, and sometimes including, in addition, doors, windows or solar modules. The panels can be fixed directly onto the walls or onto a metal structure around...

  5. A Novel wave-form command shaper for overhead cranes

    Directory of Open Access Journals (Sweden)

    KHALED ALHAZZA

    2013-12-01

    Full Text Available In this work, a novel command shaping control strategy for oscillation reduction of simple harmonic oscillators is proposed, and validated experimentally. A wave-form acceleration command shaper is derived analytically. The performance of the proposed shaper is simulated numerically, and validated experimentally on a scaled model of an overhead crane. Amplitude modulation is used to enhance the shaper performance, which results in a modulated wave-form command shaper. It is determined that the proposed wave-form and modulated wave-form command shaper profiles are capable of eliminating travel and residual oscillations. Furthermore, unlike traditional impulse and step command shapers, the proposed command shaper has piecewise smoother acceleration, velocity, and displacement profiles. Experimental results using continuous and discrete commands are presented. Experiments with discrete commands involved embedding a saturation model-based feedback in the algorithm of the command shaper.

  6. Trusses Of Tensegrity Type In A Concept Of Train Station Renovation In Żary

    Directory of Open Access Journals (Sweden)

    Lechocka Paulina

    2015-09-01

    Full Text Available The first railway station in Żary was built in 1843 in Germany. After the Second World War and years of socialism in Poland the meaning of railway decreased and its technical condition deteriorated. Now the building needs renovation and change of function. Tensegrity structures may be useful in renovation of platforms shelter. They are strut and tie construction, in which there is self-stabilization between compressed and tensioned elements. Conception of new platform shelter is based on exemplary tensegrity module consist of three struts and nine cables (called „Simplex”. Tensegrity would make railway station more modern, but not cover its original elevation.

  7. DolphinAtack: Inaudible Voice Commands

    OpenAIRE

    Zhang, Guoming; Yan, Chen; Ji, Xiaoyu; Zhang, Taimin; Zhang, Tianchen; Xu, Wenyuan

    2017-01-01

    Speech recognition (SR) systems such as Siri or Google Now have become an increasingly popular human-computer interaction method, and have turned various systems into voice controllable systems(VCS). Prior work on attacking VCS shows that the hidden voice commands that are incomprehensible to people can control the systems. Hidden voice commands, though hidden, are nonetheless audible. In this work, we design a completely inaudible attack, DolphinAttack, that modulates voice commands on ultra...

  8. Distinctiveness of Initial Preform Properties in Renovation

    Directory of Open Access Journals (Sweden)

    V. M. Yaroslavtsev

    2015-01-01

    Full Text Available Technologies of renovation form a special group of resource-and energy saving technological processes as they are, by definition, already aimed either at increasing resource of the objects satisfying needs of the society life support and practical activities in different spheres, or at extension of their life cycle including a reuse of material from which they are made. Renovation is used where there is a material object, which does not meet requirements of standard or technical documentation.A characteristic feature of the renovation technologies is lack of procedure for a choice of the preform as in all cases an initial preform is the renovation object itself. Thus each object, acting as an initial preform, has the exclusively individual properties, including technological ones.Distinctiveness of renovation object properties is correlated, first of all, with the personified conditions of formation and (or change of condition of their properties in time at all stages of life cycle (production – transportation – warehousing – operation starting with a preform material when manufacturing under all types of loadings (technological and operational. As a result each object forms its "history" of loading and damages and, therefore, its information base which has to consider the phenomenon of “heredity of life cycle”. The term "heredity of life cycle" characterizes information support of object at any moment under review, including both information of technological inheritance, and data of operational heredity.As a result at every moment of time we have a product with a set of new, uncertain properties caused by the phenomena of heredity of life cycle. These properties are individual for each object to be renovated, which changed its status for the status of initial preform for different types of renovation technologies. This is one of the most important distinctions of renovation technology from the technology used to manufacture a new

  9. Commanders' Survey: School for Command Preparation Feedback

    National Research Council Canada - National Science Library

    Frame, Adela

    1997-01-01

    .... All command designees attend the PreCommand Course (PCC). PCC provides common understanding of current doctrine, and up-to-date information on Army-wide policy, programs and special items of interest...

  10. Dwelling thermal renovation: which stakes, which solutions?

    International Nuclear Information System (INIS)

    Delduc, Paul; Demeulenaere, Laurence; Verdure, Mathieu; Ayong Le Kama, Alain; Fuk Chun Wing, Dimitri; Kiefer, Noemie; Mauroux, Amelie; Charlier, Dorothee; Hini, Sihame; Pinto Silva, Kleber; Giraudet, Louis Gaetan; Nauleau, Marie-Laure; Daussin-Benichou, Jeanne-Marie; Teissier, Olivier; Finidori, Esther; Grandjean, Alain; Allibe, Benoit; Gadrat, Pierre; Couriol, Aude; Menard, Francois; Rouquette, Celine; Houriez, Guillaume; Francois, Dominique; Aubert, Celine; Canardon, Daniel

    2015-01-01

    This publication proposes three sets of contributions. The first one addresses context and stakes. The contributions propose: a literature review on household behaviour and investments in energy efficiency, a focus on the key role of dwellings in energy transition through a comparative study of the four pathways of the National Debate for Energy Transition, and a discussion about consensus and uncertainties regarding the determining factors of heating temperature in dwellings. The second set addresses public policies and their assessment: improvement of the technical-economical assessment of the benefit of dwelling energetic renovations, discussion of the organisation and results of a survey on dwelling, equipment, and energy needs and uses, an analysis of several measures aimed at reaching objectives of energy efficiency of dwellings, a discussion of renovation works quality, a discussion of the impact of the sustainable development tax credit on thermal renovation, the optimisation of energy renovation in co-properties by third party financing, some foreign examples of policies in favour of dwelling thermal renovation. The third set of contributions addresses the needed technical, organisational and market evolutions: how the building sector can face the challenges of energy transition, the possibilities to propose innovative solutions adapted to existing housing buildings, and a comparative analysis of material and building equipment costs and market structures in Europe. Other texts are proposed in appendix: the origin of the Phebus survey, a description of incentive arrangements, and a map of climate zones in France

  11. Kinds of initial billets in renovation technologies

    Directory of Open Access Journals (Sweden)

    V. M. Yaroslavtsev

    2014-01-01

    Full Text Available Nowadays, technologists in charge of repair, restoration, modernization, and utilization of engineering and other tangible objects widely use the concepts "renovation" and "renovation technologies" pioneered at BMSTU. In forming a new field of science these concepts, in the proper sense of the word, are of composite, generalized character. They concern all the activities and technologies aimed at increasing an object resource or its lifecycle extension, including object material recycling.In the cutting-edge renovation technologies an object (part, assembly, machine, etc. damaged in the operating process is considered to be an initial billet. In renovation, one of the most widespread kinds of initial billets is a damaged part.Such a part can be used again, if, for example, it has saved its material properties in full measure while only contact surfaces or parts of these surfaces have become damaged, and at a point of renovation they can be restored for recycling. If a part has lost its initial properties in full bulk of material, it may be reusable in the assemblies and machines with less rigid requirements for material properties.Or in case of properties loss below the permissible level a damaged part-billet is utilized. Thus, the part-billet state at the point of renovation defines the kind of renovation technology and the main (basic technological method to effect on the damaged part, as well as a set and a sequence of technological methods in general manufacturing process of renovation.However renovation technologies are used not only at the repair and restoration stages after operation-service. So, at the manufacturing stage of a new product to provide the quality to raise a resource are applied the same technological methods as renovation technologies for the objects damaged at the stage of operation. Besides, it is known that at the manufacturing stage a part quality depends not only on the last operation, but also on the features of

  12. Renovation of the Stockholm sewerage system

    International Nuclear Information System (INIS)

    Sandin, Paer

    1987-01-01

    Within a few years Stockholm will let all its treated wastewater into the Saltsjoen. The Saltsjoen is the inner part of the Stockholm Archipelago, which is one of the finest recreation areas in Sweden and where many Stockholmians spend a great deal of their leisure time. That is one reason why it is so important that all wastewater is treated before it reaches the recipient. A sewerage system in bad condition means that the risk of not allowed/unplanned overflows is increased. In order to prevent overflows we drafted 'Plan 83' which tells us how our sewerage system shall be constructed in the future and what measures has to be made in the system. Renovations of the existing pipes is one method to get a well functioning sewer system. Today we have made about 50 different objects at a total length of 6000 m. Why do we renovate sewers and why are we attempting to develop methods for pipe renovations?

  13. Energy Efficient Renovation of Social Housing

    DEFF Research Database (Denmark)

    Bech-Nielsen, Grith; Christiansen, Michael

    In years to come the social housing sector (SH) must undergo renovation. The SH is out of step with modern requirements when it comes to plan arrangements, energy frame calcu-lation, flexible building services and social challenges. A way to solve such challenges in an environmentally, economically......, such as residents, housing administration, politicians, advi-sors, producers and contractors. Secondly we present follow up methods for developing an overall future energy renova-tion SH strategy. Our project contributes to the building sector by suggesting new methods for meeting challenges concerning energy......), (2) workshops and (3) seminars for qualifying (4) the definition of a common framework for (5) the development and (6) acceptance of the actual energy renovation strategy, which will then be transformed into action plans in the form of (7) ”common screening” of housing and housing areas as a basis...

  14. Bæredygtige systemleverancer ved renovering

    DEFF Research Database (Denmark)

    Schipull Kauschen, Jan

    2014-01-01

    System (PSS). This thesis presents the hypothesis that system deliveries may be cast as Product-Service Systems, creating the pre-conditions for sustainable integrated product deliveries. Case Studies Renovation case studies have evinced partial use of system deliveries in recent years; however......-of-sales er dermed relevant for bæredygtige leverancer, der disse kræver at ansvaret forbliver hos systemejeren over leverancens hele livscyklus, fra produktion til bortskaffelsen. Denne type produkt kendes fra andre områder under navnet Product-Service-System (PSS). I afhandlingen opstilles derfor hypotesen...... om at systemleverancer kan udformes som Product-Service-Systems og at dermed skabes forudsætningerne for bæredygtige systemleverancer. Casestudier Casestudier om renovering har desuden vist, at der til dels anvendes systemleverancer til renovering i de sidste år, men at disse leverancer sjældent er...

  15. Fabulous Facilities: New Constructions and Renovations.

    Science.gov (United States)

    American Libraries, 1997

    1997-01-01

    Renovation and construction projects in 18 public and academic libraries across the United States are showcased, with 23 photographs illustrating library interiors and exteriors. Discussion centers on architecture, costs, technology infrastructure and equipment, preservation of old facilities, furniture, and library functions. (AEF)

  16. Chances and barriers for passive house renovations

    NARCIS (Netherlands)

    Mlecnik, E.; Opstelten, I.; Rovers, R.; Verdeyen, N.; Wagenaar, A.

    2016-01-01

    There is significant potential for carbon reduction and energy saving in residential buildings. Various market actors are looking for ways to increase the uptake of passive house renovation and its certification.
    This study aimed specifically to draw lessons from research projects towards the

  17. Renovation of the CERN Computer Centre

    CERN Multimedia

    Patrice Loïez

    2003-01-01

    The Computer Centre at CERN is seen after half of the equipment is the large ground floor room has been removed. A large-scale spring-cleaning operation took place before renovation work for the new CERN Grid system began. Fifteen kilometres of cables that were no longer needed were removed from the cavity floor for recycling.

  18. 75 FR 6383 - Lead-Based Paint Renovation, Repair and Painting, and Pre-Renovation Education Activities in...

    Science.gov (United States)

    2010-02-09

    ..., Repair and Painting, and Pre- Renovation Education Activities in Target Housing and Child Occupied....C. 2682(c)(3), and a lead-based paint pre-renovation education program in accordance with section... TSCA, and a lead-based paint pre-renovation education program in accordance with section 406(b) of TSCA...

  19. 76 FR 27044 - Lead-Based Paint Renovation, Repair and Painting, and Pre-Renovation Education Activities in...

    Science.gov (United States)

    2011-05-10

    ..., Repair and Painting, and Pre- Renovation Education Activities in Target Housing and Child Occupied...), and a lead-based paint pre-renovation education program in accordance with section 406(b) of TSCA, 15... renovation and remodeling activities of pre-1978 housing and child-occupied facilities in the State of...

  20. Renovating animal facilities to withstand disasters.

    Science.gov (United States)

    Cartwright, Jim; Contratto, Jim; Gould, Nathan; Freeman, William

    2013-10-01

    In the aftermath of Superstorm Sandy, new attention has been drawn to planning for and mitigating the effects of disasters on laboratory animal facilities. A number of design approaches and solutions can be easily incorporated into a new vivarium, enhancing its ability to withstand and recover from a disaster. Renovating a vivarium poses special challenges, however. Existing conditions in the project area may dictate which approaches or solutions are feasible, and retrofitting is often more complex and expensive than incorporating the same features into new construction. The authors explain how project design teams can evaluate the types of disasters that a renovated facility will need to address and develop a design strategy that responds to these disasters in the most effective way.

  1. APOLLO 11 COMMANDER NEIL ARMSTRONG IN SIMULATOR

    Science.gov (United States)

    1969-01-01

    Apollo 11 commander Neil Armstrong is going through flight training in the lunar module simulator situated in the flight crew training building at KSC. Armstrong will pilot the lunar module to a moon landing on July 20, following launch from KSC on July 16.

  2. Robot Task Commander with Extensible Programming Environment

    Science.gov (United States)

    Hart, Stephen W (Inventor); Yamokoski, John D. (Inventor); Wightman, Brian J (Inventor); Dinh, Duy Paul (Inventor); Gooding, Dustin R (Inventor)

    2014-01-01

    A system for developing distributed robot application-level software includes a robot having an associated control module which controls motion of the robot in response to a commanded task, and a robot task commander (RTC) in networked communication with the control module over a network transport layer (NTL). The RTC includes a script engine(s) and a GUI, with a processor and a centralized library of library blocks constructed from an interpretive computer programming code and having input and output connections. The GUI provides access to a Visual Programming Language (VPL) environment and a text editor. In executing a method, the VPL is opened, a task for the robot is built from the code library blocks, and data is assigned to input and output connections identifying input and output data for each block. A task sequence(s) is sent to the control module(s) over the NTL to command execution of the task.

  3. Negotiating heritage in Danish public housing renovation

    DEFF Research Database (Denmark)

    Martens Gudmand-Høyer, Sidse

    2017-01-01

    This paper presents a significant problem when it comes to the challenging task of safeguarding recent past architectural heritage with reference to the democratization ideals propagated by the New Heritage paradigm. Based on controversy mapping relating to the renovation of a Danish 1950s high...... and the performance of interventions conveying heritage understandings can be addressed and given a binding form for this process and its partners....

  4. Rebuilding instead of renovation?; Neubauen statt Sanieren?

    Energy Technology Data Exchange (ETDEWEB)

    Ott, W.; Seiler, B.; Kaufmann, Y. [Econcept AG, Zuerich (Switzerland); Binz, A.; Moosmann, A. [Fachhochschule beider Basel, Muttenz (Switzerland)

    2002-07-01

    This comprehensive final report for the Swiss Federal Office of Energy (SFOE) presents the results of a study that examined the question of building renewal in Switzerland - should one rebuild or renovate? The report first examines the age-profile of Swiss buildings, defines renewal strategies and ideas, looks at renewal cycles and, in the light of future renewal demands, describes scenarios for replacement with new buildings instead of carrying out total renovations. The housing owners and their methods of management for multiple-apartment housing are described and the various factors involved in making decisions on how to renovate are discussed from the technical, legal and fiscal points of view. The report goes on to examine the ecological and energy aspects of renewal, presenting figures on energy consumption and material flows. Building renewal is also discussed from the social and regional planning points of view. The report is concluded with a discussion on rebuilding or renewal that takes current renewal deficits, costs and social aspects into account and makes recommendations for further action. An appendix presents renewal case studies.

  5. The Strategic-Renovation Banks’ Risks Management

    Directory of Open Access Journals (Sweden)

    Yeremeychuk Raisa A.

    2017-04-01

    Full Text Available The article is aimed at developing approaches to implementation of the strategic-renovation risk management. Essence of risk theories was researched, the concept of «risk» in the bank’s management system were analyzed. On the basis of a theoretical generalization of scientific literature and the carried out analysis of existing risk management strategies to ensure the security of banking business, the strategy of renovation management has been selected. Because bank risks are part of the economic risk system, they are complex in their nature. However, given the importance of bank risks, the interpretation of their essence is still a debating matter. In a certain number of cases, their essence is replaced by the cause of occurrence, that is, all the different circumstances, factors that lead to the losses. So today, banks are considering risks, in particular, not only as a source of possible losses, but also as an opportunity to generate additional profits. An algorithm for taking a strategic-renovation decision on the banks’ risks management system has been proposed.

  6. US command improvements and command vulnerability

    International Nuclear Information System (INIS)

    Ball, D.; Bethe, H.A.; Blair, B.G.; Bracken, P.; Carter, A.B.; Dickinson, H.; Garwin, R.L.; Holloway, D.; Kendall, H.W.

    1988-01-01

    In essence, the United States still relies on the strategic command system erected during the 1960s and 1970s, but as we have seen, this system suffers from a number of serious weaknesses. Among these the authors emphasized the vulnerability of vital communications even before any warheads impact directly on U.S. targets, as well as the systems; heavy reliance on a relatively small number of limited-endurance aircraft as command posts and radio relays. This paper focuses on the committed improvement program, assess its impact on command vulnerability, and offer suggestions for further command improvements designed to enhance crisis stability and to facilitate ware termination should deterrence fail. The reader should note that this chapter is rather more technical than the remainder of this book

  7. Roof renovation of buildings 128 and 129

    CERN Multimedia

    2015-01-01

    The roof renovation of buildings 128 and 129 is scheduled to take place from 17 August to 15 October 2015.   During this period, access to the "raw material" workshop will be limited and controlled due to asbestos removal. Collecting your orders directly from the building will be difficult, or even impossible, and urgent requests will be difficult to carry out. We therefore ask you to create your requests via EDH, so that delivery may be carried out as soon as possible. Thank you for your understanding. GS Department

  8. Renovation of the CERN outdoor lighting

    CERN Multimedia

    GS Department

    2010-01-01

    Due to the renovation of the CERN outdoor lighting, traffic will be limited to one way along “Route Gregory” from the E entrance (France) up to “Route Fermi” just before the water tower between 12th and 23rd July 2010. Disruption can also be expected in the car parks “Les Erables” and “Les Tilleuls” close to building 30 and also the car park in front of building 377, between 19th and 30th July 2010. Thanks for your understanding. SEM Group

  9. Extensions and renovations of reactor protection systems

    International Nuclear Information System (INIS)

    Hellmerichs, K.

    1985-01-01

    Increase of requirements by the authorities as to the design of reactor protection systems affected in the last years not only plans being under construction, but also resulted in partly spacious extensions and renovations. While working on the extensions and renovations a lot of problems arose: far-reaching performance of newest guidelines and rules in spite of old plant concepts; partly higher degree of redundancy requirements of the new systems in contrast to the present systems; use of present safeguard systems for new accident countermeasures; designation of priorities between present and new functions, especially in view of fault behaviour of present systems; adaptation of the new I and C equipment to the present signalisation-, operation- and information-arrangements under consideration of the present operational philosophy; spatial incorporation of new equipments; construction as to time without expanding of the planned refuelling phases. Because the KWU has planned and constructed such alterations in nearly 10 plants a lot of experience has been gathered. (author)

  10. Zero energy office building renovation; Energieneutrale kantoorrenovatie

    Energy Technology Data Exchange (ETDEWEB)

    Deguelle, D.; Krijnen, M. [DHV, Amersfoort (Netherlands); Heijnis, J. [cepezed, Delft (Netherlands)

    2011-04-15

    Building Brains has been set up by TNO as a cooperative and started September 21, 2009. The aim of the project was to answer the question how the energy consumption in the Netherlands can be reduced by 50% up to 2030 or how the built environment can be made energy-neutral. This issue of the magazine is dedicated to Building Brains project. Four different renovation concepts are compared: energy-neutral renovation that involves the exclusive use of sustainable generated energy;.the application of the passive construction principles; the use of Double Skin Facades; and decentralized facade-integrated installation techniques. Following the results of this study two optimized refurbishment approaches for a zero energy office are designed. [Dutch] Building Brains is een door TNO opgezet samenwerkingsproject dat op 21 september 2009 van start ging. Het doel van het project is antwoord te geven op de vraag hoe tot 2030 het energiegebruik in Nederland kan worden gehalveerd of hoe de gebouwde omgeving energieneutraal kan worden gemaakt. Deze aflevering van het tijdschrift TVVL is vrijwel geheel gewijd aan het Building Brains project. Er is onderzocht hoe verschillende renovatieconcepten scoren. Er zijn vier renovatieconcepten met elkaar vergeleken: energie neutraal renoveren door middel van duurzame energieopwekking, toepassen van het passiefhuisprincipe, toepassen van een tweedehuidfacade en toepassen van een decentrale, gevel-geintegreerde installatie. Uit de studie kwamen twee geoptimaliseerde concepten voor een energieneutrale kantoorrenovatie naar voren.

  11. Sewerage systems: Overflow problems and renovation methods

    Energy Technology Data Exchange (ETDEWEB)

    Tanttu, Unto [Plancenter Ltd. (Finland)

    1987-12-15

    Total investments in Finland (1984) spent on sewer systems were roughly FIM 590 million. A big share, about 14 % of this sum (FIM 82 million), was spent on rehabilitation of networks. But is this still enough? According to some evaluations the respective amount should be about FIM 500 million for rehabilitation only. So the question, how to keep the performance of sewer networks satisfactory in the future, is really important. The overflow problem is one of the most serious problems caused by old and improperly working sewer systems. Anyhow, several other aspects of a poor condition of sewers are to be seen: - excess hydraulic loading of treatment plants, - normal maintenance and operation (flushing, opening of clogs) increases, and is more expensive, - unexpected renovation works and interruptions in operation cause e.g. troubles in traffic, odour problems in the environment, hygienic hazards etc., - the performance of other underground networks (water pipes, district heating pipes etc.) may be threatened by earth crushings due to old sewers. In this paper a short description of these items is presented as well as a description of the sewer renovation methods used recently in Finland.

  12. Renovation and uprating of seven hydropower plants in Java

    International Nuclear Information System (INIS)

    Nuessli, W.

    1991-01-01

    The Indonesian Power Authority is planning to renovate and uprate seven hydropower stations in Java to expand plant life expectancy, ensure operating safety and reliability, and increase power and generation within economical limits. The power plants were constructed in the early 1920s and extended between 1945 and 1950. Their capacities vary between 4 and 20 MW. For the renovation project, Colenco Power Consulting Ltd. is acting as a consultant to PLN. In February 1990, Colenco inspected all seven power plants. The results of the inspections served as the basis for the development of renovation plans for each of the seven hydropower plants. To determine the cost of the proposed renovation plans, appraisers had to determine a method for comparing the value of an existing plant to that of a renovated one. The two different evaluation methods used for these comparisons are the focus of this paper

  13. Existing sustainable renovation concepts for single-family houses

    DEFF Research Database (Denmark)

    Tommerup, Henrik M.; Vanhoutteghem, Lies; Svendsen, Svend

    2010-01-01

    In the Nordic Innovation Centre Project, SuccessFamilies, the main objective is to change the business environment in order to speed up the implementation of sustainable renovation of single-family houses – proposing new service concepts that will combine both the technical solutions, financing...... with individual solutions, traditional warehouses ”do-it-yourself-shops” and some actors marketing single products. To speed up the implementation of sustainable renovation of single-family houses there is a great need for full-service packages. Existing technical renovation concepts, typically focusing...... services as well as other promoting issues to overcome the behavioural, organizational, legal and social barriers that exist in sustainable renovation. A starting point for such a change has been to get an overview of the existing sustainable renovation concepts, i.e. full-service concepts and technical...

  14. Indoor Air Quality of Residential Building Before and After Renovation

    Science.gov (United States)

    Sánka, Imrich; Földváry, Veronika

    2017-06-01

    This study investigates the impact of energy renovation on the indoor air quality of an apartment building during the heating season. The study was performed in one residential building before and after its renovation. An evaluation of the indoor air quality was performed using objective measurements and a subjective survey. The concentration of CO2 was measured in the bedrooms, and a sampling of the total volatile compounds (TVOC) was performed in the living rooms of the selected apartments. Higher concentrations of CO2 and TVOC were observed in the residential building after its renovation. The concentrations of CO2, and TVOC in some of the cases exceeded the recommended maximum limits, especially after implementing energy-saving measures on the building. The average air exchange rate was visibly higher before the renovation of the building. The current study indicates that large-scale renovations may reduce the quality of an indoor environment in many apartments, especially in the winter season.

  15. Spacecraft command and control using expert systems

    Science.gov (United States)

    Norcross, Scott; Grieser, William H.

    1994-01-01

    This paper describes a product called the Intelligent Mission Toolkit (IMT), which was created to meet the changing demands of the spacecraft command and control market. IMT is a command and control system built upon an expert system. Its primary functions are to send commands to the spacecraft and process telemetry data received from the spacecraft. It also controls the ground equipment used to support the system, such as encryption gear, and telemetry front-end equipment. Add-on modules allow IMT to control antennas and antenna interface equipment. The design philosophy for IMT is to utilize available commercial products wherever possible. IMT utilizes Gensym's G2 Real-time Expert System as the core of the system. G2 is responsible for overall system control, spacecraft commanding control, and spacecraft telemetry analysis and display. Other commercial products incorporated into IMT include the SYBASE relational database management system and Loral Test and Integration Systems' System 500 for telemetry front-end processing.

  16. 75 FR 39524 - Lead-Based Paint Renovation, Repair and Painting, and Pre-Renovation Education Activities in...

    Science.gov (United States)

    2010-07-09

    ..., Repair and Painting, and Pre- Renovation Education Activities in Target Housing and Child Occupied... pre-renovation education program in accordance with section 406(b) of TSCA, 15 U.S.C. 2686(b). This... and child-occupied facilities in the State of Oregon. Individuals and firms falling under the North...

  17. Tips for cleanroom construction and renovation.

    Science.gov (United States)

    Mixon, William; Huffman, Lanny

    2009-01-01

    The installation or renovation of a cleanroom is an increasing priority among compounders who, to offer sterile preparations, must comply with the most recent version of United States Pharmacopeia revised General Chapter 797 guidelines. To upgrade their pharmacy facilites, many compounders have worked successfully with a large-scale mechanical engineering firm or a specialized construction company dedicated to cleanroom installation. However, a qualified local mechanical contractor with design capability is a valuable and often overlooked resource for the construction of customized stae-of-the-art cleanrooms. In this report, we describe the installation of such a facility in a busy pharmacy and suggest ways in which compounding pharmacists can identify competent local contractors and control the cost of construction and upgrades. The addition of a cleanroom has enabled The Compounding Pharmacy in Hickory, North Carolina, to achieve accreditation from the Pharmacy Compounding Accreditation Board.

  18. Acoustic Properties of a Renovated Building

    Directory of Open Access Journals (Sweden)

    Tomas Januševičius

    2011-02-01

    Full Text Available The article explores the effects of partitions, ceilings and facades on noise insulation in the renovated different buildings. The conducted experiments were aimed at analyzing partitions of 120 mm brick mounted gypsum panels while other walls were 520 mm thick and plastered on both sides. Under natural conditions, sound insulation factors of facades were measured and compared according to comfort classes. The obtained results revealed that thick brick walls of 520 mm insulated the sound of 58 decibels (dB (class B. In contrast, 120 mm brick masonry partition reduced sound only to 48 dB which is class E and agrees with the lowest class of sound insulation. We also calculated the sound insulation factor applying three formulas considering the mass law of sound insulation and comparing it with other previous studies. The paper examines and discusses the findings of the performed calculations and measurements.Article in Lithuanian

  19. Status report on the GANIL renovation program

    International Nuclear Information System (INIS)

    Loyer, F.

    1995-01-01

    Three years ago, a renovation program was initiated to ensure GANIL a lifetime of at least 15 years in order to allow an efficient use of the two radioactive ion beam facilities, SISSI which has been operational since last year and SPIRAL which will be in use in 98. The status of this program is reported which mainly concerns the control system, the RF systems (voltage and phase control devices), the vacuum system (control and pumping devices), the power supplies (interfaces, current sensors, and internal electronics), the beam instrumentation (electronics and local control devices) and the system which survey the accelerator access. The improvements of the accelerator ECR sources are also described and the first results to produce refractor metallic ion beams like uranium are mentioned. (author)

  20. Successful sustainable renovation; Succesvolle duurzame renovatie

    Energy Technology Data Exchange (ETDEWEB)

    Van Doorn, A.Q.C.M.; De Ruyter, G.M. [Yacht, Randstad, Diemen (Netherlands); Kaper, A.A. [Ballast Nedam, Nieuwegein (Netherlands)

    2011-04-15

    Building Brains has been set up by TNO as a cooperative and started September 21, 2009. The aim of the project was to answer the question how the energy consumption in the Netherlands can be reduced by 50% up to 2030 or how the built environment can be made energy-neutral. This issue of the magazine is dedicated to Building Brains project. It is often said that Smart defined ambitions and strict process management are important ingredients for successful realization of building projects. Sustainable real estate developments can be considered as highly ambitious projects. To find out how and why sustainable renovation projects actually became sustainable, a group of professionals systematically evaluated 21 leading Dutch real estate renovation projects. For each project they interviewed the client, consultant, architect and contractor. Based on the results it was concluded that a pre-defined (sustainability) ambition is not a necessity to realize a project that can be considered sustainable in practice. [Dutch] Building Brains is een door TNO opgezet samenwerkingsproject dat op 21 september 2009 van start ging. Het doel van het project is antwoord te geven op de vraag hoe tot 2030 het energiegebruik in Nederland kan worden gehalveerd of hoe de gebouwde omgeving energieneutraal kan worden gemaakt. Deze aflevering van het tijdschrift TVVL is vrijwel geheel gewijd aan het Building Brains project. Een jaar lang zijn de succes- en faalfactoren van duurzame renovatieprojecten onderzocht. Voor 21 projecten zijn in totaal 73 actoren geinterviewd. Er werd een vragenlijst gebruikt, die vanuit vijf invalshoeken was opgesteld: ambitiestelling, duurzame maatregelen, actoren, beleidsomgeving en proces. Per project zijn opdrachtgevers, architecten, aannemers, adviseurs en gebruikers geinterviewd. Alle data is verwerkt in een database. De projecten voldoen aan het selectiecriterium Trias Energetica. Het accent lag op woningbouw, waar de grootste uitdaging ligt voor duurzame

  1. Socioeconomic Renovation in Viet Nam: The Origin, Evolution, and ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Referred to as doi moi, this "renovation" has produced dramatic changes in ... In this book, Vietnamese scholars describe the origins and impacts of these changes. ... for two Colombian cities were discussed at ADAPTO's second international ...

  2. Prerequisites for Successful Strategic Partnerships for Sustainable Building Renovation

    DEFF Research Database (Denmark)

    Jensen, Per Anker; Johansen, Jakob Berg; Thuesen, Christian

    The purpose of this paper is to identify the prerequisites for establishing successful strategic partnerships in relation to renovating buildings sustainably. Establishing strategic partnerships is in the paper seen as a potential way to make building renovation more sustainable in Denmark...... and analysis of strategic partnerships models as well as typical processes used in building renovation. Experiences from development of new strategic partnerships have particularly been found in the UK and Sweden. Based on two workshops with practitioners representing the whole value chain in the construction...... industry and analyses of two exemplary cases the paper suggests prerequisites for establishing successful strategic partnerships for sustainable building renovation. The results show that strategic partnerships are collaborations set up between two or more organizations that remain independent...

  3. Success and fail factors in sustainable real estate renovation projects

    NARCIS (Netherlands)

    Volker, L.

    2011-01-01

    Sustainability remains an important issue for the construction industry. Yet, sustainable real estate developments are still considered as highly ambitious projects. To find out how and why sustainable renovation projects actually became sustainable we systematically evaluated 21 leading Dutch real

  4. ECO-TECHNIQUE OF SEWER RENOVATION USING COMPOSITE ...

    African Journals Online (AJOL)

    2011-12-31

    Dec 31, 2011 ... An eco-technical renovation of the sewage system is developed in this paper; this ... structural analysis of a typical shell unit with an ovoid form .... described by five fundamental equations, can be reduced to three equations.

  5. AFRICOM: Combatant Command for the 21st Century

    National Research Council Canada - National Science Library

    Juergens, Jr., Richard A

    2008-01-01

    ...: European Command, Southern Command, Northern Command, Central Command, and Pacific Command, as the Department of Defense's unified command structure responsible for specific geographical regions of the world...

  6. 40 CFR 745.92 - Fees for the accreditation of renovation and dust sampling technician training and the...

    Science.gov (United States)

    2010-07-01

    ... renovation and dust sampling technician training and the certification of renovation firms. 745.92 Section... Renovation § 745.92 Fees for the accreditation of renovation and dust sampling technician training and the... the following disciplines: Renovator, dust sampling technician. (ii) Exemption. No fee shall be...

  7. The building stock from perspective of change - renovation roadmap

    Energy Technology Data Exchange (ETDEWEB)

    Airaksinen, M., Email: miimu.airaksinen@vtt.fi

    2012-06-15

    By 2050, population, society and economic structures will have changed several times. The long and short-term goals and objectives concerning our built environment are mutually contradictory. Determining objectives or creating scenarios for the future built environment is fruitless. We should approach the development of the built environment from the perspective of change and improve the flexibility and adaptability of the built environment. For the users, a built environment meeting their basic needs is part of sustainable development. Identified short-range renovation needs include eliminating damp and mould problems, improving energy and eco-efficiency, removing obstacles to mobility and adapting buildings to accommodate the needs of the elderly. Vacated areas and buildings should be recycled and offered a new life supporting a sense of community and service production. Improved energy efficiency reduces greenhouse gas emissions. Instead of renovating individual buildings, renovation of the entire area is recommended. Sustainability in construction translates into favouring recycling and renewable materials and building-specific energy systems using renewable and/or low-emission resources. It is recommended that renovations to improve energy efficiency are scheduled to coincide with other maintenance/ renovations so as to reduce costs. In renovation construction, the role of service improvement is more important than products. Improved services help to identify a solution that fulfils several customer needs, meets financial limitations and can be implemented efficiently. Companies are advised to view renovation construction as an innovative market segment entitled to its own service portfolio. Truths about new building should be discarded and new services developed based on recent study results and new technologies. (orig.)

  8. Command History for 1990

    Science.gov (United States)

    1991-05-01

    Marine Corps Tiaining Systems (CBESS) memorization training Inteligence Center, Dam Neck Threat memorization training Commander Tactical Wings, Atlantic...News Shipbuilding Technical training AEGIS Training Center, Dare Artificial Intelligence (Al) Tools Computerized firm-end analysis tools NETSCPAC...Technology Department and provides computational and electronic mail support for research in areas of artificial intelligence, computer-assisted instruction

  9. Command Home Page

    Science.gov (United States)

    Inclusion And Diversity Navy Standard Integrated Personnel System (NSIPS) My Navy Portal Board of One Source USA.gov U.S. Office of Special Counsel Social Media Directory and Policy US Navy App Locker Navy Personnel Command (NPC) Navy SAPR Navy EEO Inclusion And Diversity Navy Standard Integrated

  10. Actual heating energy savings in thermally renovated Dutch dwellings

    International Nuclear Information System (INIS)

    Majcen, Daša; Itard, Laure; Visscher, Henk

    2016-01-01

    The register of the Dutch social housing stock was analysed, containing 300.000 dwellings, renovated between 2010 and 2013. The main objective was twofold: to evaluate the performance gap in these dwellings before and after the renovation and to establish what renovation measures achieve the highest reduction of consumption, particularly in practice (actual savings). The results showed large performance gaps in dwellings with low R and high U values, local heating systems, changes from a non-condensing into a condensing boiler and upgrades to a natural ventilation system. Regarding the actual effectiveness of renovation measures, replacement of old gas boilers with more efficient ones yields the highest energy reduction, followed by deep improvements of windows. Installing mechanical ventilation yields a small reduction compared to other measures, but still much larger than theoretically expected. The paper shows once more that the calculation method currently in use cannot be considered accurate if compared to actual consumption. The study demonstrated that unrealistic theoretical efficiencies of heating systems and insulation values are causing a part of the performance gap. Nowadays, large datasets of buildings thermal performance and actual consumption offer an opportunity to improve these misconceptions. - Highlights: • Performance gap is lower in more efficient buildings. • Replacements of gas boilers – the most energy reduction among renovation measures. • Replacing the ventilation system yields a much larger reduction than expected. • How well are the standard values of the calculation methods defined? • Provide large public building performance databases including actual use data.

  11. Evaluation of airborne particulates and fungi during hospital renovation.

    Science.gov (United States)

    Overberger, P A; Wadowsky, R M; Schaper, M M

    1995-07-01

    This study was conducted over 30 weeks on a hospital floor undergoing partial renovation. Some patients housed on the floor were immunosuppressed, including bone marrow transplant recipients. The construction zone was placed under negative pressure and was separated from patient rooms by existing hospital walls and via erection of a temporary barrier. Other control measures minimized patient exposure to airborne materials. Air sampling was done for 3 weeks prior to construction, 24 weeks during construction, and 3 weeks after renovation was completed. Airborne particulate concentrations, total spore counts, particle size, and fungal species were assessed. At the beginning of the renovation there were increases in airborne particulates (from 0.2 to 2.0 mg/m3) and fungal spores (from 3.5 to 350 colony forming units (CFU/m3), but only in the construction zone. Throughout the remainder of the renovation, particulate and fungal spore levels fluctuated inside the construction zone but remained close to baseline values in the patient area. When renovation was completed, particulates and spore counts inside the construction zone decreased to preconstruction levels. The primary fungus isolated from air samples was Penicillium. This study demonstrated that control measures were effective in reducing exposures of hospitalized patients to airborne particulates and spores and in reducing the increased risk of aspergillosis and other fungal infections associated with hospital construction projects. The data from this study may be useful in establishing exposure guidelines for other health care settings.

  12. Energy renovation practices in Danish homes. The influence of energy labels on home renovation practices

    Energy Technology Data Exchange (ETDEWEB)

    Christensen, Toke Haunstrup; Gram-Hanssen, Kirsten [Danish Building Research Institute, Aalborg University, Dr. Neergaards Vej 15, DK-2970 Hoersholm (Denmark); Adjei, Afi [Building Research Establishment Ltd. BRE, Bucknalls Lane, Garston, WD25 9XX Watford (United Kingdom); De Best-Waldhober, Marjolein [Energy research Centre of the Netherlands ECN, Policy Studies, Amsterdam (Netherlands)

    2012-02-15

    Heating of dwellings represents a major policy challenge for the transition to a low carbon society. In Denmark, heating of dwellings represents about 25% of the total Danish final energy consumption and about 13% of the total CO2 emission. The majority of this is related to heating of older dwellings, and as the rate of replacement is low, the main potential for energy saving is to improve the energy efficiency of the existing dwelling stock through energy renovation. This paper provides an analysis of Danish experiences with energy labels (also known as the Energy Performance Certificate, EPC), which indicate the energy efficiency of buildings and include recommendations for improvements. The aim of the EPC is to motivate homeowners to do energy improvements. In Denmark, energy audit schemes date back to the early 1980s and energy rating of houses (energy labelling) was introduced in 1997. The long history of energy audit schemes and energy labelling makes Denmark an interesting case for the study of the experiences with and impact of this kind of policy measure. With the EU Energy Performance of Buildings Directive (EPBD) from 2002, an energy labelling scheme similar to the Danish scheme introduced in 1997 is now in use in all EU member states. The focus of this paper is on the homeowners' experience and use of the EPC and the key research questions are: How do the homeowners understand and use the EPC? Does the EPC have an influence on home energy renovation practices? The analysis is based on results from a survey of Danish homeowners who have purchased a home with an EPC within recent years. The Danish survey is part of the European project IDEAL EPBD, which was funded by the European Commission under the Intelligent Energy Europe programme and run from 2008 to 2011. The results indicate a rather limited influence of the EPC on Danish homeowners' home energy renovation practices. Also, the results show that even though most homeowners find the label

  13. Design and Implementation of the Automatic Assessment System for the Command and Control Specialty in Ships

    Directory of Open Access Journals (Sweden)

    Zhang Hao

    2017-01-01

    Full Text Available On the basis of analyzing the actual demand of automated assessment system for the command and control specialty in ships, the thought of the overall design of automated assessment system for the command and control specialty in ships is given, and the concrete realization methods of the user login module, test paper operation module and system maintenance module are studied and demonstrated. The proposed design idea and implementation method of automated assessment system for the command and control specialty in ships is scientific, efficient and practical, and provides reference for the exploitation of automated assessment system for the command and control specialty in ships.

  14. 32 CFR 724.406 - Commander, Naval Medical Command.

    Science.gov (United States)

    2010-07-01

    ... 32 National Defense 5 2010-07-01 2010-07-01 false Commander, Naval Medical Command. 724.406 Section 724.406 National Defense Department of Defense (Continued) DEPARTMENT OF THE NAVY PERSONNEL NAVAL DISCHARGE REVIEW BOARD Principal Elements of the Navy Department Discharge Review System § 724.406 Commander...

  15. The Renovation and Future Capabilities of the Thacher Observatory

    Science.gov (United States)

    O'Neill, Katie; Osuna, Natalie; Edwards, Nick; Klink, Douglas; Swift, Jonathan; Vyhnal, Chris; Meyer, Kurt

    2016-01-01

    The Thacher School is in the process of renovating the campus observatory with a new meter class telescope and full automation capabilities for the purpose of scientific research and education. New equipment on site has provided a preliminary site characterization including seeing and V-band sky brightness measurements. These data, along with commissioning data from the MINERVA project (which uses comparable hardware) are used to estimate the capabilities of the observatory once renovation is complete. Our V-band limiting magnitude is expected to be better than 21.3 for a one minute integration time, and we estimate that milli-magnitude precision photometry will be possible for a V=14.5 point source over approximately 5 min timescales. The quick response, autonomous operation, and multi-band photometric capabilities of the renovated observatory will make it a powerful follow-up science facility for exoplanets, eclipsing binaries, near-Earth objects, stellar variability, and supernovae.

  16. Energy Renovation of Danish Single-Family Houses

    DEFF Research Database (Denmark)

    Mortensen, Andrea

    2015-01-01

    . The results show that despite the barriers the owners can in fact be motivated to perform private energy renovations. A sound project economy is all-important for this to happen and it should if possible be supported by improvements in both comfort, indoor environment and architecture to increase......The PhD project is based on requirements from the European Union to reduce the energy consumption and on current renovation needs of and a huge energy saving potential in the Danish single-family houses from the 1960’s and 1970’s. The project focuses on the barriers for energy renovations...... of these houses and on defining motivation factors for the homeowners. The barriers are many and variating in influence and studies show that both professionals and homeowners are affected. The barriers range from lack of interest and knowledge to uncertainties about among others economy and technical solutions...

  17. Prerequisites for Successful Strategic Partnerships for Sustainable Building Renovation

    DEFF Research Database (Denmark)

    Jensen, Per Anker; Johansen, Jakob Berg; Thuesen, Christian

    2017-01-01

    The purpose of this paper is to identify the prerequisites for establishing successful strategic partnerships in relation to renovating buildings sustainably. Establishing strategic partnerships is in the paper seen as a potential way to make building renovation more sustainable in Denmark...... industry and analyses of two exemplary cases the paper suggests prerequisites for establishing successful strategic partnerships for sustainable building renovation. The results show that strategic partnerships are collaborations set up between two or more organizations that remain independent...... particularly in terms of reducing energy consumption and use of resources and increase productivity. However, until now we have only had a limited number of such partnerships implemented and the few examples that do exist, mostly concern the construction of new buildings. The paper is based on an investigation...

  18. APOLLO 16 COMMANDER JOHN YOUNG ENTERS ALTITUDE CHAMBER FOR TESTS

    Science.gov (United States)

    1971-01-01

    Apollo 16 commander John W. Young prepares to enter the lunar module in an altitude chamber in the Manned Spacecraft Operations Building at the spaceport prior to an altitude run. During the altitude run, in which Apollo 16 lunar module pilot Charles M. Duke also participated, the chamber was pumped down to simulate pressure at an altitude in excess of 200,000 feet. Young, Duke and command module pilot Thomas K. Mattingly II, are training at the Kennedy Space Center for the Apollo 16 mission. Launch is scheduled from Pad 39A, March 17, 1972.

  19. Combatant Commanders Informational Series, USEUCOM

    National Research Council Canada - National Science Library

    Burton, Steven

    1996-01-01

    ...) and the diverse challenges it faces require it to maintain one of the highest operational and personnel tempos of the combatant command, are limited in the opportunity of personnel new to the command...

  20. 40 CFR 745.90 - Renovator certification and dust sampling technician certification.

    Science.gov (United States)

    2010-07-01

    ... sampling technician certification. 745.90 Section 745.90 Protection of Environment ENVIRONMENTAL PROTECTION... technician certification. (a) Renovator certification and dust sampling technician certification. (1) To become a certified renovator or certified dust sampling technician, an individual must successfully...

  1. Development of Facilities Master Plan and Laboratory Renovation Project

    Energy Technology Data Exchange (ETDEWEB)

    Fox, Andrea D

    2011-10-03

    Funding from this grant has allowed Morehouse School of Medicine to complete its first professionally developed, comprehensive campus master plan that is in alignment with the recently completed strategic plan. In addition to master planning activities, funds were used for programming and designing research renovations, and also to supplement other research facility upgrades by providing lighting and equipment. The activities funded by this grant will provide the catalyst for substantial improvement in the School's overall facilities for biomedical education and research, and will also provide much of the information needed to conduct a successful campaign to raise funds for proposed buildings and renovations.

  2. Command and motivation

    DEFF Research Database (Denmark)

    Jacobsen, Christian Bøtcher; Hvidtved, Johan; Andersen, Lotte Bøgh

    2014-01-01

    Motivated employees are crucial to organizations, but external interventions such as command systems and financial incentives may decrease motivation. If these external interventions are perceived to be controlling, they are expected to crowd out intrinsic motivation, and this may also apply...... to other types of autonomous motivation such as public service motivation. The perception of external interventions is thus expected to be vital. This article investigates how the perception of a specific command system (obligatory student plans) is associated with intrinsic motivation and public service...... motivation. Using a dataset with 3,230 school teachers in Denmark, a structural equation model shows that the perception of obligatory student plans as controlling is negatively associated with all of the investigated types of employee motivation, supporting that motivation crowding can occur....

  3. Joint Mission Command Implementation

    Science.gov (United States)

    2016-01-22

    choose. The paper finds that trust is strongly influenced by the subconscious brain and treating it like a tool ignores biology and results in... bias for action and empowerment.14 Since then, the services have evaluated their own concepts of command assessing them against Dempsey’s vision. Lt...understanding, intent, and trust, only trust is strongly influenced by the subconscious brain. Treating trust like it can be taught, or a behavior that

  4. Early stage decision support for sustainable building renovation – A review

    DEFF Research Database (Denmark)

    Nielsen, Anne Nørkjær; Jensen, Rasmus Lund; Larsen, Tine Steen

    2016-01-01

    Decision support tools for building renovation are important as assistance to professional building owners when setting goals for sustainability, and for making sure that the objectives are met throughout the design process, both when renovating a single building or choosing renovation actions wi...

  5. 77 FR 74472 - Application to Export Electric Energy; Energia Renovable S.C., LLC

    Science.gov (United States)

    2012-12-14

    ... DEPARTMENT OF ENERGY [OE Docket No. EA-387] Application to Export Electric Energy; Energia... application. SUMMARY: Energia Renovable S.C., LLC (Energia Renovable) has applied for authority to transmit...)). On September 11, 2012, DOE received an application from Energia Renovable for authority to transmit...

  6. IEA SHC Task 37: advanced housing renovation - Final report; IEA SHC Task 37: advanced housing renovation - Schlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Hastings, R.

    2010-01-15

    This final report for the Swiss Federal Office of Energy (SFOE) reports on work done within the framework of the International Energy Agency's Solar Heating and Cooling program. The project addressed the energy consumption of residential buildings and their renovation. The report discusses the goals set for the project and reports on five projects that were initiated. These include the refurbishment of apartment buildings to meet the 'Passive House' standard, air-tightness, potential for the use of solar energy, solar facades and the renovation of historic listed buildings. Conclusions resulting from these projects are presented and discussed.

  7. Renovation of the 'old' NPP units as an economically effective way of nuclear power development

    International Nuclear Information System (INIS)

    Zrodnikov, A.V.; Toshinsky, G.I.; Komlev, O.G.; Dragunov, Yu.G.; Stepanov, V.S.; Klimov, N.N.; Kopytov, I.I.; Krushelnitsky, V.N.

    2005-01-01

    In the process of nuclear power development there comes a phase when the old' power-units, which reactor installations have expired the designed and extended service lifetime are withdrawn from operating. At this phase in the case of the same annual investments into nuclear power, the increase of the total set up capacity of the nuclear power will be terminated because introduction of capacities due to construction of 'new' power-units only compensates for the reduction of capacities caused by withdrawing from operating the 'old' power-units. Along with this, taking into account a sizeable difference in the service lifetime of the nuclear steam supplying systems and the rest infrastructure of the nuclear power plants, it is an opportunity to find the solution to the problem of compensating for the withdrawn capacities without considerable increasing the annual investments. This opportunity is connected with use of the innovative nuclear power technology based on multipurpose small power modular fast reactors with lead-bismuth coolant for replacement of the withdrawn capacities (renovation of power-units). The features of the innovative nuclear power technology based on the SVBR-76/100 reactor installations, the results of the technical and economical investigations that demonstrate the high economical efficiency of use of the renovation technology using the SVBR-75/100 reactor modules are presented in the Paper. (author)

  8. Force Protection and Command Relationships: Who's Responsible

    National Research Council Canada - National Science Library

    Moller, James

    1998-01-01

    .... This monograph analyzes the joint force protection program by investigating the terms: command, chain of command, command relationship, and how these terms authorize and empower a commander to implement this program across the joint force...

  9. Renovating Interior Office Space: What a Manager Needs To Consider.

    Science.gov (United States)

    Babey, Evelyn R.

    When planning an office renovation, a manager should design an office layout that is efficient and should consider the psychological aspects of office design, including sound level, color harmony, and lighting. The manager must also have a good understanding of all phases of the project plan and the timing involved. There are basically five phases…

  10. Overheating risk barriers to energy renovations of single family houses

    DEFF Research Database (Denmark)

    Psomas, Theofanis Ch.; Heiselberg, Per Kvols; Duer, Karsten

    2016-01-01

    Highlights •Energy renovations of houses in moderate climates increase overheating risk. •Critical measures are the floor insulation and the improvement of the airtightness. •Decrease of the g value of windows diminishes the intensity and the period of it. •Static method of assessment shows highe...

  11. Post Occupancy Evaluation of 23 Newly Renovated Apartments in Copenhagen

    DEFF Research Database (Denmark)

    Iqbal, Ahsan; Afshari, Alireza

    2016-01-01

    The present article is based on the post occupancy occupants’ perception of indoor air quality of recently renovated 23 residential apartments in Copenhagen. The apartments are equipped with novel mechanical ventilation systems. The apartments can be categorised in four, according to the design o...

  12. Supply-side collaboration for energy-efficient renovations

    NARCIS (Netherlands)

    Straub, A.; Mlecnik, E.

    2015-01-01

    The supply side for nearly zero energy building (nZEB) renovation of owner-occupied single-family houses in Europe is suffering from a severe image problem of lack of knowledge and trust, inefficient construction processes, insufficient quality assurance and communication difficulties with

  13. Renovation techniques for fatigue cracked orthotropic steel bridge decks

    NARCIS (Netherlands)

    de Jong, F.B.P.

    2007-01-01

    This dissertation presents the research into renovation techniques for orthotropic steel bridge decks. These techniques are needed to solve fatigue problems in the decks of these bridges, as several fatigue cracks have been detected in the deck structure of these bridges the last decade. A

  14. Collaborative business model development for home energy renovations

    NARCIS (Netherlands)

    Mlecnik, E.; Straub, A.; Haavik, T

    2018-01-01

    In the EU, housing retrofit rates have to increase to about 2.5–3% of the housing stock per year to achieve policy goals. The development of new business models and collaboration of SMEs in a fragmented market is expected to result in an increase in home renovations. This study presents a way to

  15. Maturity model for strategic collaboration in sustainable building renovation

    DEFF Research Database (Denmark)

    Johansen, Jakob Berg; Jensen, Per Anker; Thuesen, Christian

    2017-01-01

    To enable the construction industry to execute sustainable renovation projects which entails a reduction in use of resources, an increase in productivity and a more socially sustainable construction process, new tools are needed. A maturity model can be a simple and effective tool for a company...

  16. Sustainable (Re)Construction : The Potential of the Renovation Market

    NARCIS (Netherlands)

    Usanov, A.; Chivot, E.

    2013-01-01

    The Sustainable Urban (Re)Construction Briefing argues that renovation is going to play an increasingly important role in the overall construction market – for several reasons. One of them is the urgency of climate change mitigation. Europe has a large stock of buildings, which together contribute

  17. Renovation of the outside lighting - Bldg. 112 zone

    CERN Multimedia

    GS Department

    2010-01-01

    Due to the renovation of the outside lighting, the traffic will be disrupted along “Route Feynman”. From the water tower (Bldg. 227) to Restaurant Nr. 2 (Bldg. 504) between 18 and 30 August. We recommend great caution. Thank you for your understanding. SEM Group

  18. Command History, 1993.

    Science.gov (United States)

    1994-04-01

    his space capsule. The ()CUILAR COtJNTI:,RROI,.L I)FVICI" was built by the Naval Air Rework Facility, NAS Pensacola. tfor NAMRI, in the early 1960s...Dunwoody, GA Kevin G. Singleton, ENS USNR Naval Aviation Schools Command Kyle W M. Taylor, ENS USNR U.S. Naval Academy Jason A. Temple, ENS USNR Auburn...Pensacola, 13-15 Oct 93. Pokorski, T.L., LICDR MSC USN, attended Aircrew Modified IEquipment for Ladies in Aviation (AMELIA) Fri -service Long-range Planning

  19. Value based building renovation - A tool for decision-making and evaluation

    DEFF Research Database (Denmark)

    Jensen, Per Anker; Maslesa, Esmir

    2015-01-01

    Research on the barriers for building renovation in Denmark has revealed that an important obstacle is a lack of simple and holistic tools that can assist stakeholders in prioritisation and decision-making during the early stages of building renovation projects. The purpose of this article...... is to present a tool - RENO-EVALUE, which can be used as decision support for sustainable renovation projects, and for evaluation, during and after building renovations. The tool is a result from the European Eracobuild project ACES - "A concept for promotion of sustainable retrofitting and renovation in early...... stages". This article presents the main result of a work package concerning benefits of renovation. RENO-EVALUE has been developed from four case studies on renovation projects in Denmark, tested and validated on the cases and in a Delphi study. The tool is value based by focusing on the different...

  20. Reliability assessment of PARR-1 renovated I and C system startup channel-b

    Energy Technology Data Exchange (ETDEWEB)

    Qamar, M.A.; Habib, M.A.; Iqbal, M.

    1991-11-20

    The report covers the reliability assessment of the startup channel-B of the PARR-1 renovated instrumentation and Control. For startup channel-A, a separate report (DNSRP-10(7)/88) was prepared in 1988. As the modules are of different origins in both the channels, a separate calculation was necessary. In the report the overall unreliability of the startup channel has been calculated by considering 1 out of 2 operation mode. In the assessment, the reliability calculations for the channel has been performed using similar assumptions as used in the authors' report on startup channel-A. For the analysis the Component Count Method (CCM) was applied. Comparison of results for channel-A and channel-B were made.

  1. Energi- og miljøvurdering ved renovering

    DEFF Research Database (Denmark)

    Holleris Petersen, E.

    En afprøvning af pc-værktøjet BEAT 2000's viser, at BEAT 2000 er et velegnet værktøj, der umiddelbart kan anvendes til energi- og miljøvurdering af renoveringssager. BEAT 2000 er afprøvet dels på renovering med energibesparende foranstaltninger i form af solfangere, solvægge og ventilationsanlæg...... med varmegenvinding, dels på mere traditionel renovering af små, utidssvarende lejligheder. En udbygning af datagrundlaget, især for alternative energibesparende løsninger og de materialer, der indgår, vil kunne reducere tidsforbruget ved definition af de utraditionelle og usædvanlige bygningsdele...

  2. Renovation and Expansion of the Caspary Research Building. Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Grassia, V. L.

    2004-02-07

    Critical to the Hospital's rebuilding efforts have been its public partners at the federal, state, and local government levels who have made a major financial commitment to renovating the Hospital's research infrastructure. To date, the Hospital for Special Surgery (HSS) has been awarded a total of nearly $8.5 million to create and equip new, state-of-the-art laboratories for scientific investigations. The modernization of the Hospital's research facilities was jump-started in 1998 with a $950,000 seed grant from the National Institutes of Health (NIH) to renovate laboratories for immunology research in the Caspary Research Building. Coupled with a matching $5.5 million commitment from HSS, this infusion of NIH funding laid the groundwork for an overhaul of all of the Hospital's research space.

  3. Sustainable renovation concepts for single-family houses

    DEFF Research Database (Denmark)

    Vanhoutteghem, Lies; Tommerup, Henrik M.; Svendsen, Svend

    , the financial possibilities of the homeowner etc. Calculation of packages of energy efficient renovation solutions targeted the three segments of houses show that primary energy use and heating bill can be reduced with up to about 75% or a factor 4 corresponding to the level of a new house or better. It seems...... that the passive house level can not quite be reached with standard solutions. They require that more ambitious measures are applied. The total investment needed to reduce the heating bill by a factor 4 including replacement of e.g. roof and windows is up to EUR 100,000. It is generally difficult to obtain...... be seen as a possibility to make it easy for the homeowner to comply with possible future requirements to realize far-reaching energy savings in connection with extensive renovations, provided that the building sector offers the solutions. Homeowners need someone to take care of all relevant steps...

  4. Analysis and Comparison of Overheating Indices in Energy Renovated Houses

    DEFF Research Database (Denmark)

    Psomas, Theofanis Ch.; Heiselberg, Per Kvols; Duer, Karsten

    2015-01-01

    The scientific literature offers a number of methods for assessing the likelihood of overheating in buildings. The paper calculates eight well-documented indices for four representative family houses, from moderate and temperate climates, under different renovation processes (66 variants), with t......The scientific literature offers a number of methods for assessing the likelihood of overheating in buildings. The paper calculates eight well-documented indices for four representative family houses, from moderate and temperate climates, under different renovation processes (66 variants......), with the use of multi-zone energy software. In two out of four cases, the calculation included passive cooling measures for optimization purposes (shading, ventilative cooling). The analysis shows strong correlations between different methods-indices originating from the same comfort model theory independently...

  5. PCB i bygninger - afhjælpning, renovering og nedrivning

    DEFF Research Database (Denmark)

    Andersen, Helle Vibeke

    SBi-anvisning 268 beskriver, hvordan PCB-forurening af indeluften afhjælpes, og hvordan PCB håndteres, når man renoverer eller nedriver bygninger med PCB. Uanset om der er tale om afhjælpning, renovering eller nedrivning, kan arbejdet generere PCB-holdigt affald. Anvisningen forklarer derfor......, hvordan affaldet skal håndteres, og hvordan man beskytter mennesker og miljø under arbejdet. Anvisningen er baseret på byggebranchens erfaringer og den aktuelle forskningsbaserede viden om PCB i bygninger. SBi-anvisning 268 afløser den snart fire år gamle SBi-anvisning 242 om renovering af bygninger med...... PCB, som ikke behandlede spørgsmålet om affaldshåndtering....

  6. How to motivate homeowners to invest in sustainable renovation?

    DEFF Research Database (Denmark)

    Galiotto, Nicolas; Heiselberg, Per; Knudstrup, Mary-Ann

    2014-01-01

    important to integrate, aside the societal needs, the individual values which might motivate these decision-makers to undertake such a sustainable renovation. A critical review of decision-aid methods and tools, which are susceptible to be integrated in a process of home renovation, is presented...... in this paper. Methods have been primarily classified on the basis on whether or not they allow incorporating truthfully decision-makers’ individual values while still improving the process effectiveness. Reviewed tools have been classified as building analysis, optimization and decision making tools...... such as constructivist, interactive and iterative process, quantitative attributes and values based on qualitative judgments, simplicity and accuracy of the methods, time use and modularity are furthermore discussed. It is concluded that multi-criteria decision making approaches using interactive and constructivist...

  7. Environmental issues associated with R Reactor renovation and startup

    International Nuclear Information System (INIS)

    Marter, W.L.

    1982-01-01

    This memorandum identifies the more significant environmental issues that would be associated with renovation and startup of R Reactor to meet future demands for nuclear weapon materials. Some key environmental issues identified are: potential occupational radiation exposures associated with repairing the leaks in the reactor nozzles and thermal shield tanks and with renovating the disassembly basin facilities; the impacts of constructing additional cooling water pumping capacity; the effect of increased pumping on impingement and entrainment at the pump houses; thermal effects on the R Canal-precooler pond-Par Pond ecosystem from increased discharge of cooling water; and effects of increased water flow in Lower Three Runs Creek on biota and on cesium-137 remobilization

  8. Effects of pasture renovation on hydrology, nutrient runoff, and forage yield.

    Science.gov (United States)

    de Koff, J P; Moore, P A; Formica, J; Van Eps, M; DeLaune, P B

    2011-01-01

    Proper pasture management is important in promoting optimal forage growth and reducing runoff and nutrient loss. Pasture renovation is a management tool that improves aeration by mechanically creating holes or pockets within the soil. Pasture renovation was performed before manure application (poultry litter or swine slurry) on different pasture soils and rainfall simulations were conducted to identify the effects of pasture renovation on nutrient runoff and forage growth. Renovation of small plots resulted in significant and beneficial hydrological changes. During the first rainfall simulation, runoff volumes were 45 to 74% lower for seven out of eight renovated treatments, and infiltration rates increased by 3 to 87% for all renovated treatments as compared with nonrenovated treatments. Renovation of pasture soils fertilized with poultry litter led to significant reductions in dissolved reactive P (DRP) (74-87%), total P (TP) (76-85%), and total nitrogen (TN) (72-80%) loads in two of the three soils studied during the first rainfall simulation. Renovation did not result in any significant differences in forage yields. Overall, beneficial impacts of renovation lasted up to 3 mo, the most critical period for nutrient runoff following manure application. Therefore, renovation could be an important best management practice in these areas.

  9. Energy Renovation of a Typical Danish Single-family House

    DEFF Research Database (Denmark)

    Tommerup, Henrik M.; Svendsen, Svend

    2007-01-01

    In 2006, new tighter energy performance requirements were introduced in Denmark for both new buildings and renovation, including a new classification system for low energy buildings. These demands are based on the directive on Energy Performance of Buildings, the EPBD (2002/91/EC). In general the...... available on the internet: http://www.rwsc.dk/EP_Villa_Projektrapport_RW_DK/main_report_villa.pdf....

  10. The renovation of the Main Building is approaching completion

    CERN Multimedia

    Anaïs Schaeffer

    2011-01-01

    The renovation work under way in the CERN Main Building should be completed by June. From the floors to the ceilings, everything has been done to give this historic building a new lease of life.     Taken in the early 60s, this picture illustrates how light maintenance was a challenge for the auditorium in CERN’s main building.   Nobody who has recently had to shimmy between the cables, ladders and toolboxes deposited around the main hall of Building 500 to get to the post office, the bank or Restaurant 1 can be oblivious to the fact that the ground floor of the Main Building has been getting a face-lift. The renovation work, which started with the first-floor concourse in June 2010, should be finished over the next couple of months. The first-floor renovations, now almost complete, set the tone for the rest of the project. The floor and ceiling, both fitted with special acoustic materials for efficient noise damping, have been completely refurbished and the Building ...

  11. On the Testing of Renovations Inside Historical Opera Houses

    Science.gov (United States)

    Fausti, P.; Prodi, N.

    2002-11-01

    Due to the large number of historical opera houses in Italy, many theatres have been renovated in the past, but still more will undergo major restoration in the near future. Unfortunately in this context, the quality and protection of acoustics is rarely considered as an issue of its own. As a consequence, the renovations are hardly ever accompanied by proper scientific and technical support. In this paper, the acoustical impact of works inside the Teatro Municipale "R.Valli" in Reggio Emilia, including the restoration of the main hall and the construction of a new acoustic shell, will be dealt with. Surveys were held in the theatre before renovation and were repeated with identical procedure and instruments after its completion. By means of a comparative analysis of the architectural project and of acoustical data, the impact of major changes in the theatre can be predicted. It is shown that this approach can help in drafting an operational scheme for safeguarding the acoustics of historical opera houses.

  12. Modular code supervisor. Automatic generation of command language

    International Nuclear Information System (INIS)

    Dumas, M.; Thomas, J.B.

    1988-01-01

    It is shown how, starting from a problem formulated by the user, to generate the adequate calculation procedure in the command code, and acquire the data necessary for the calculation while verifying their validity. Modular codes are used, because of their flexibility and wide utilisation. Modules are written in Fortran, and calculations are done in batches according to an algorithm written in the GIBIANE command language. The action plans are based on the STRIPS and WARPLAN families. Elementary representation of a module and special instructions are illustrated. Dynamic construction macro-actions, and acquisition of the specification (which allows users to express the goal of a program without indicating which algorithm is used to reach the goal) are illustrated. The final phase consists in translating the algorithm into the command language [fr

  13. Armstrong practices in Lunar Module simulator

    Science.gov (United States)

    1969-01-01

    Neil A. Armstrong, Commander for the Apollo 11 Moon-landing mission, practices for the historic event in a Lunar Module simulator in the Flight Crew Training building at KSC. Accompanying Armstrong on the Moon flight will be Command Module Pilot Michael Collins and Lunar Module Pilot Edwin E. Aldrin Jr.

  14. Integrated project delivery methods for energy renovation of social housing

    Directory of Open Access Journals (Sweden)

    Tadeo Baldiri Salcedo Rahola

    2015-11-01

    Full Text Available Optimised project delivery methods forsocial housing energy renovations European Social Housing Organisations (SHOs are currently facing challenging times. The ageing of their housing stock and the economic crisis, which has affected both their finances and the finances of their tenants, are testing their capacity to stick to their aim of providing decent and affordable housing. Housing renovation projects offer the possibility of upgrading the health and comfort levels of their old housing stock to current standards and improve energy efficiency, and this solution also addresses the fuel poverty problems suffered by some tenants. Unfortunately, the limited financial capacity of SHOs is hampering the scale of housing renovation projects and the energy savings achieved.  At the same time, the renovation of the existing housing stock is seen as one of the most promising alternative routes to achieving the ambitious CO2 emissions reduction targets set by European authorities – namely, to reduce EU CO2 emissions to 20% below their 1990 levels by 2020. The synergy between European targets and the aims of SHOs has been addressed by the energy policies of the member states, which focus on the potential energy savings achievable by renovating social housing. In fact, the European initiatives have prioritised energy savings in social housing renovations to such an extent that these are referred to as ‘energy renovations’. Energy renovation is therefore a renovation project with higher energy savings target than a regular renovation project. In total, European SHOs own 21.5 million dwellings representing around 9.4% of the total housing stock. Each SHO owns a large number of dwellings, which means there are fewer people to convince of the need to make energy savings through building renovations, maximising the potentially high impact of decisions. Moreover, SHOs are responsible for maintaining and upgrading their properties in order to continue

  15. Tenants’ experiences and satisfaction with renovated and energy retrofitted social housing

    DEFF Research Database (Denmark)

    Knudsen, Henrik Nellemose; Jensen, Ole Michael

    studied and verified. The objective of the present project was to evaluate tenants’ experiences and satisfaction with renovated and energy retrofitted social housing. A questionnaire was developed that included questions about perceived indoor climate, possible co-benefits, the renovation process, various....... The evaluations show that it is possible to implement a comprehensive renovation with focus on energy savings in older building stock and at the same time add value for tenants in the form of i.a. improved perceived indoor climate....

  16. Holistic Energy Renovation of Pre- and Postwar Apartment Blocks in Denmark

    DEFF Research Database (Denmark)

    Eriksen, Marlene Stenberg Hagen; Rode, Carsten; Bjarløv, Søren Peter

    of today. This paper presents the Danish research project Holistic Energy Renovation, which aims at performing a holistic energy renovation of two case buildings. As part of the project nine parameters for a holistic renovation have been defined, a method for developing and assessing a holistic building...... of the assessment method and an evaluation of how the holistic perspective has influenced the project process and product development....

  17. Renovation versus New Construction and Building Decision Tool for Educational Facilities

    OpenAIRE

    Pope, Carrie; Marks, Eric; Back, Edward; Leopard, Tim; Love, Thomas

    2016-01-01

    Renovation of an existing building is an accomplished stem of the construction industry because it supplies financial diversification for construction stakeholders. Although several construction planning tools and stakeholder alignment exercises have been developed, no tool exists to assist project owners to decide between renovating an existing building and new construction with a comprehensive decision criteria. The objective of this research is to create and test a renovation versus new bu...

  18. A spacecraft computer repairable via command.

    Science.gov (United States)

    Fimmel, R. O.; Baker, T. E.

    1971-01-01

    The MULTIPAC is a central data system developed for deep-space probes with the distinctive feature that it may be repaired during flight via command and telemetry links by reprogramming around the failed unit. The computer organization uses pools of identical modules which the program organizes into one or more computers called processors. The interaction of these modules is dynamically controlled by the program rather than hardware. In the event of a failure, new programs are entered which reorganize the central data system with a somewhat reduced total processing capability aboard the spacecraft. Emphasis is placed on the evolution of the system architecture and the final overall system design rather than the specific logic design.

  19. Paramount Interest: Command Relationships in Amphibious Warfare

    National Research Council Canada - National Science Library

    Peabody, Hitch

    2004-01-01

    In 2001, U.S. amphibious forces abandoned sixty years of established command and control doctrine, replacing the traditional senior-subordinate relationship between Navy and Marine commanders with coequal command. Why did it change...

  20. Command in a field hospital.

    Science.gov (United States)

    Bricknell, M C M

    2003-03-01

    This paper examines the challenges involved in commanding a field hospital. There are frequent, dynamic tensions between the military culture that is based on a task-focussed, hierarchical structure and the clinical culture that is based on flat, process-focussed, multidisciplinary teams. The paper outlines the cultural environment of the field hospital and then examines the deployment sequence whereby a functioning clinical facility may be created from a group of disparate individuals. There are a number of tools that may assist with this including the personality of the Commanding Officer, individual skills, the creation of an organizational identity and the choice of command structure.

  1. Command and Control of Joint Air Operations through Mission Command

    Science.gov (United States)

    2016-06-01

    and outlines the C2 architecture systems, processes, and philosophy of com- mand required to enable mission command effectively. Mission Command...General Dempsey highlights the fact that “trust is the moral sinew that binds the distributed Joint Force 2020 together” and observes that “unless...con- fident about how their subordinates will make decisions and adapt to the dynamic battlespace environment. Processes, Systems, and Philosophy of

  2. Global Command and Control Management Structure

    National Research Council Canada - National Science Library

    1995-01-01

    This instruction establishes: responsibilities for the Joint Staff, Services, Defense agencies, combatant and functional unified commands, and other activities regarding management of Global Command and Control (GCC...

  3. Command in the Objective Force

    National Research Council Canada - National Science Library

    Wilbeck, Christopher

    2003-01-01

    This paper seeks to answer what type of command will best serve the Army's Objective Force in gaining the initiative, building momentum, and exploiting success to achieve land dominance in the future...

  4. Combatant Commanders Informational Series: USPACOM

    National Research Council Canada - National Science Library

    Comnick, Michael

    1996-01-01

    ...) introducing potential joint staff officers to their specific command. Inbound staff officers, prepared by reviewing this product, arrive on station ready to receive specialized training without needing background indoctrination...

  5. Applications of the renewable energies; Aplicaciones de las energias renovables

    Energy Technology Data Exchange (ETDEWEB)

    Gomez Rocha, Luis Martin [Comision Nacional para el Ahorro de Energia, Mexico, D.F. (Mexico)

    2001-07-01

    The solar energy manifests itself in different forms and its application has been fundamental for the humankind development. These forms are known as renewable energies, since they are energy forms that are renewed or remade with time or that are so abundant on Earth, that they will last for hundreds or thousands of years, either we use them or not. The main advantage of the utilization of the renewable energies in comparison with hydrocarbons is the one of having smaller impact on the environment, which brings about the conservation of nonrenewable resources, and to postpone its exhaustion. They allow the distributed generation, diminishing the power losses in the transmission and distribution systems, which increases the overall efficiency. In addition they can be the drive for regional development and generation of employment, because when having applications in remote zones and being a field still not completely developed in Mexico, the possibility exists of enabling professionals and technicians. From the point of view of the power sector, the renewable energies extend the supply and availability of energy, making more flexible and independent the operation and reliability of the national power system. [Spanish] La energia solar se manifiesta de diversas formas y su aplicacion ha sido fundamental para el desarrollo de la humanidad. A estas formas se les conoce como energias renovables, ya que son formas de energia que se van renovando o rehaciendo con el tiempo o que son tan abundantes en la tierra, que perduraran por cientos o miles de anos, las usemos o no. La principal ventaja del aprovechamiento de las energias renovables en comparacion con los hidrocarburos es la de tener menor impacto al medio ambiente, lo que trae consigo la conservacion de recursos no renovables, y posponer su termino. Permiten la generacion distribuida, disminuyendo las perdidas energeticas en los sistemas de transmision y distribucion, lo que incrementa la eficiencia general. Ademas

  6. Prerequisites for Successful Strategic Partnerships for Sustainable Building Renovation

    DEFF Research Database (Denmark)

    Jensen, Per Anker; Johansen, Jakob Berg; Thuesen, Christian

    2017-01-01

    and analysis of strategic partnerships models as well as typical processes used in building renovation. Experiences from development of new strategic partnerships have particularly been found in the UK and Sweden. Based on two workshops with practitioners representing the whole value chain in the construction...... particularly in terms of reducing energy consumption and use of resources and increase productivity. However, until now we have only had a limited number of such partnerships implemented and the few examples that do exist, mostly concern the construction of new buildings. The paper is based on an investigation...

  7. Defining Sustainability in Relation to the Renovation of Modern Housing

    DEFF Research Database (Denmark)

    Peters, Terri

    Summary This paper focuses on comparing practice-based and academic definitions and metrics of “sustainability” as they relate to the transformation of Modern housing in Denmark. Keywords:Sustainability, Renovation, Architecture, Denmark, Modern housing 1. Introduction to the Study Buildings...... define and understand what constitutes green design, but also to understand its premises for it would be counter productive for the designer to leap into green design without understanding and agreeing to such basic principles as connectedness”. In recent years, a new way of thinking about sustaina...

  8. Development of a method for holistic energy renovation

    DEFF Research Database (Denmark)

    Morelli, Martin

    recovery. The long-term performance of the renovation may be reduced due to mould growth behind the interior insulation or decay of the wooden beams. The energy saving potential in two multi-family buildings was investigated by parameter studies of existing energy saving measures for both the building....... Measurements of temperature and relative humidity showed that conditions for mould growth were present. However, no signs of mould growth were documented at dismantling of the interior insulation. A method was developed for the design of energy saving measures based on both Failure Mode and Effect Analysis...

  9. Disseny d'una microxarxa amb generació renovable

    OpenAIRE

    Durich Serra, Ruben

    2016-01-01

    El present projecte pretén abordar l’estudi dels costs de generació d’energia elèctrica renovable de la tecnologia solar-fotovoltaica per tal de formar part del disseny d’una microxarxa de generació d’energia elèctrica. Durant la realització del projecte s’ha realitzat una breu introducció a les microxarxes de distribució d’energia elèctrica i als seus reptes. Per estudiar el cost de generació d’energia fotovoltaica s’ha utilitzat la metodologia del Levelized Cost of Energy ...

  10. Contracting and building renovation - does it work together?

    Energy Technology Data Exchange (ETDEWEB)

    Tritthart, Wibke; Bruner-Lienhart, Susanne [Inter-Univ. Research Centre for Technology, Work and Culture, Graz (Austria); Bleyl, Jan W.; Bucar, Gerhard [Graz Energy Agency (Austria)

    2007-07-01

    The renovation or refurbishment is an important point in the life cycle of a building that makes it possible to achieve both environmental and climate protection goals and a higher quality of living of the inhabitants. However, lack of money often leads to a renovation that covers only the basic requirements, whereas measures that are valuable in a long term perspective like energy saving measures are not realised. Energy performance contracting (EPC) is widely used as an instrument to reduce long term operating costs significantly by guaranteed energy savings. An energy service company (ESCo) implements saving technologies, especially in the field of heating, HVAC, lighting and plug loads, and in particular in public buildings. It is the aim of this paper to investigate the possibilities to incorporate construction measures like building envelope insulation into standard energy performance contracting.For this purpose a qualitative survey is presented that was performed among experts and stakeholders in the business: ESCos, building owners and facility managers, representatives of construction companies and financing institutions were interviewed. The focus was on their experiences with such projects, on difficulties that arose or barriers that exist from their point of view and on the chances they perceived. This provides the basis for identifying restraints and supporting factors for the integration of contracting and constructional measures.Three pilot projects that have been renovated in Austria are outlined subsequently. They are evaluated with respect to the contractual network between the project partners, types of guarantees and financing issues. Special emphasis is put on the assignment of tasks and the cash flow between the project partners. Various constellations of trades acted as energy service provider: a general contractor, an energy supply company, a consortium of a builder and a plumber. The projects reveal some differences to the standard energy

  11. " La chatarra ferrosa, ¿desperdicio industrial o recurso renovable?"

    OpenAIRE

    Valadez Valenzuela, Jaime arturo

    2011-01-01

    Conforme el avance del tiempo, y el deterioro o consumismo de los recursos renovables por el paso desenfrenado de nuestra humanidad, enfrentando el reto de subsistencia en todos los ámbitos, se nos esta presentando la necesidad de aprovechar todo aquello que de una u otra forma pueda ser reutilizado, generando inclusive la forma de otorgar "trabajo", o una manera de crear fuentes económicas para toda una gama de personas, que de tal manera que dedicándose tanto a la recolección de lo que par...

  12. Strategic Global Climate Command?

    Science.gov (United States)

    Long, J. C. S.

    2016-12-01

    Researchers have been exploring geoengineering because Anthropogenic GHG emissions could drive the globe towards unihabitability for people, wildlife and vegetation. Potential global deployment of these technologies is inherently strategic. For example, solar radiation management to reflect more sunlight might be strategically useful during a period of time where the population completes an effort to cease emissions and carbon removal technologies might then be strategically deployed to move the atmospheric concentrations back to a safer level. Consequently, deployment of these global technologies requires the ability to think and act strategically on the part of the planet's governments. Such capacity most definitely does not exist today but it behooves scientists and engineers to be involved in thinking through how global command might develop because the way they do the research could support the development of a capacity to deploy intervention rationally -- or irrationally. Internationalizing research would get countries used to working together. Organizing the research in a step-wise manner where at each step scientists become skilled at explaining what they have learned, the quality of the information they have, what they don't know and what more they can do to reduce or handle uncertainty, etc. Such a process can increase societal confidence in being able to make wise decisions about deployment. Global capacity will also be enhanced if the sceintific establishment reinvents misssion driven research so that the programs will identify the systemic issues invovled in any proposed technology and systematically address them with research while still encouraging individual creativity. Geoengineering will diverge from climate science in that geoengineering research needs to design interventions for some publically desirable goal and investigates whether a proposed intervention will acheive desired outcomes. The effort must be a systems-engineering design problem

  13. On Stakeholders and the Decision Making Process Concerning Sustainable Renovation and Refurbishment in Sweden, Denmark and Cyprus

    DEFF Research Database (Denmark)

    Gohardani, Navid; Björk, Folke; Jensen, Per Anker

    2013-01-01

    This article examines the decision making process related to sustainable renovation and refurbishment in buildings. The utilized methodology identifies three distinct phases in order to instigate an engagement in sustainable renovation, by means of questionnaires and semi-structured interviews...

  14. 40 CFR 745.326 - Renovation: State and Tribal program requirements.

    Science.gov (United States)

    2010-07-01

    ... sampling technician training programs. (ii) Procedures and requirements for the certification of renovators and dust sampling technicians. (iii) Procedures and requirements for the certification of individuals..., 2010. For the convenience of the user, the added text is set forth as follows: § 745.326 Renovation...

  15. Opportunities and Barriers related to Supply Chain Collaboration for Delivering Integrated Single-Family Home Renovations

    NARCIS (Netherlands)

    Mlecnik, E.; Kondratenko, I.; Haavik, T.

    2013-01-01

    Single-family home renovations often show deficiencies in project management. There might be a market addressing house owners who would prefer integrated renovation services and clear responsibilities. Companies that would respond to these client’s needs would have a clear market potential,

  16. Generation of components for software renovation factories from context-free grammars

    NARCIS (Netherlands)

    Brand, van den M.G.J.; Sellink, M.P.A.; Verhoef, C.

    2000-01-01

    We present an approach for the generation of components for a software renovation factory. These components are generated from a contex-free grammar definition that recognizes the code that has to be renovated. We generate analysis and transformation components that can be instantiated with a

  17. Sustainability Evaluation of Retrofitting and Renovation of Buildings in Early Stages

    DEFF Research Database (Denmark)

    Jensen, Per Anker; Maslesa, Esmir; Gohardani, Navid

    2013-01-01

    research results and ideas for the development of a tool, which can be used as decision support for renovation projects in early stages. The research is part of the Eracobuild project ACES – “A concept for promotion of sustainable retrofitting and renovation in early stages” with participants from Denmark...

  18. Historic Schools: Renovation vs. Replacement & the Role of a Feasibility Study.

    Science.gov (United States)

    National Trust for Historic Preservation, Washington, DC.

    Weighing the pros and cons of renovating a historic neighborhood school or building a new one takes preservation "know-how," experience, and creativity. The potential for renovation is routinely dismissed without full consideration of the facts and long-term implications. Central to this decision-making process is the feasibility study,…

  19. Mobilization for energy renovation. Innovative tools for the uptake of deep renovation of the existing building stock based on behavioural insights

    OpenAIRE

    Taranu, Victoria; Verbeeck, Griet

    2015-01-01

    Mobilization for energy renovation. Innovative tools for the uptake of deep renovation of the existing building stock based on behavioural insights. In the context of climate change it is a priority to reduce the energy demand and make a shift towards renewable sources of energy. In Flanders almost half of the existing residential building stock was built before 1970 with low levels of insulation and inefficient installations. The vast majority of Fle...

  20. The contribution of housing renovation to children’s blood lead levels: a cohort study

    Science.gov (United States)

    2013-01-01

    Background Routine renovation of older housing is a risk factor for childhood lead poisoning, but the contribution to children’s blood lead levels is poorly defined for children with lower exposure levels. Methods We examined a prospective cohort of 276 children followed from 6 to 24 months of age. We conducted surveys of renovation activities and residential lead hazards and obtained blood lead level (B-Pb) every six months. We analyzed B-Pb in a repeated measures design using a mixed effects linear model. Results Parent reported interior renovation ranged from 11 to 25% of housing units at the four, 6-month periods. In multivariable analysis, children whose housing underwent interior renovation had a 12% higher mean B-Pb by two years of age compared with children whose housing units were not renovated (p children in non-renovated housing, children whose housing units underwent renovation in the prior month had a 17% higher mean B-Pb at two years of age, whereas children whose housing renovation occurred in the prior 2–6 months had an 8% higher mean B-Pb. We also found an association between higher paint lead loading, measured using an X-ray fluorescence (XRF) based paint lead index, and child B-Pb (p = 0.02); for every 10 mg/cm2 increase in paint lead loading index there was a 7.5% higher mean childhood B-Pb. Conclusions In an analysis of data collected before the recent changes to Environmental Protection Agency’s Lead, Renovation, Repair and Painting Rule, routine interior housing renovation was associated with a modest increase in children’s B-Pb. These results are important for the provision of clinical advice, for housing and public health professionals, and for policymakers. PMID:23981571

  1. The ergonomics of command and control

    OpenAIRE

    Stanton, NA; Baber, C

    2006-01-01

    Since its inception, just after the Second World War, ergonomics research has paid special attention to the issues surrounding human control of systems. Command and Control environments continue to represent a challenging domain for Ergonomics research. We take a broad view of Command and Control research, to include C2 (Command and Control), C3 (Command, Control and Communication), and C4 (Command, Control, Communication and Computers) as well as human supervisory control paradigms. This spe...

  2. Renewable energy and technological development; Energia renovable y desarrollo tecnologico

    Energy Technology Data Exchange (ETDEWEB)

    Covarrubias Ramos, Rogelio [Fideicomiso para el ahorro de energia, (Mexico)

    2007-06-15

    In this presentation is widely described the work carried out by the Trust Fund for Electrical Energy Savings (FIDE) with reference to renewable energy foster. In the first part, it is found the FIDE's mission, which is focused on achieving the efficient use of the energy. Then, there are quiet briefly described the processes -carried out by the FIDE- in favour of the groundbreaking technology that achieves to decrease the energy squandering. In addition, there are mentioned different means boosting the energy savings. Then, there are described the issues the energy system should change in order to improve the actual situation of many Mexicans. There are briefly mentioned not only the environmental but also the social benefits of the use of renewable energy; besides, there are given the necessary elements in order to make it possible. Then, there are explained why the use of renewable energy would be profitable. Finally, it is described the methodology that should be followed in case it is wanted to find sponsors up to 100% for a project related to improvement of the energy production. [Spanish] Esta presentacion describe ampliamente la labor que realiza el Fideicomiso para el ahorro de energia (FIDE) en relacion con el fomento de la energia renovable, asi como el desarrollo de tecnologias que refuercen el uso de este tipo de energia. En la primera parte, se encuentra la mision del FIDE, que se enfoca en lograr que el uso de la energia sea apropiado. Enseguida, de forma breve se describen los procesos que realiza el FIDE en favor de la tecnologia innovadora que haga decrecer el dispendio de energia. Luego, se explican las aspectos endebles del sistema energetico de Mexico. Se describen escuetamente los beneficios, no solo ambientales sino tambien sociales, del uso de energia renovable; ademas, se mencionan los elementos necesarios para que esto pueda lograrse. Mas adelante, se dan las razones por las que para Mexico seria rentable el uso de energia renovable

  3. Renewable energy and technological development; Energia renovable y desarrollo tecnologico

    Energy Technology Data Exchange (ETDEWEB)

    Covarrubias Ramos, Rogelio [Fideicomiso para el ahorro de energia, (Mexico)

    2007-06-15

    In this presentation is widely described the work carried out by the Trust Fund for Electrical Energy Savings (FIDE) with reference to renewable energy foster. In the first part, it is found the FIDE's mission, which is focused on achieving the efficient use of the energy. Then, there are quiet briefly described the processes -carried out by the FIDE- in favour of the groundbreaking technology that achieves to decrease the energy squandering. In addition, there are mentioned different means boosting the energy savings. Then, there are described the issues the energy system should change in order to improve the actual situation of many Mexicans. There are briefly mentioned not only the environmental but also the social benefits of the use of renewable energy; besides, there are given the necessary elements in order to make it possible. Then, there are explained why the use of renewable energy would be profitable. Finally, it is described the methodology that should be followed in case it is wanted to find sponsors up to 100% for a project related to improvement of the energy production. [Spanish] Esta presentacion describe ampliamente la labor que realiza el Fideicomiso para el ahorro de energia (FIDE) en relacion con el fomento de la energia renovable, asi como el desarrollo de tecnologias que refuercen el uso de este tipo de energia. En la primera parte, se encuentra la mision del FIDE, que se enfoca en lograr que el uso de la energia sea apropiado. Enseguida, de forma breve se describen los procesos que realiza el FIDE en favor de la tecnologia innovadora que haga decrecer el dispendio de energia. Luego, se explican las aspectos endebles del sistema energetico de Mexico. Se describen escuetamente los beneficios, no solo ambientales sino tambien sociales, del uso de energia renovable; ademas, se mencionan los elementos necesarios para que esto pueda lograrse. Mas adelante, se dan las razones por las que para Mexico seria rentable el uso de energia renovable

  4. The Unspoken Consequence of Command, Control Communications Technology: Enhanced Micromanagement by Risk-Averse Commanders

    National Research Council Canada - National Science Library

    Carozza, John

    2004-01-01

    .... However, along with its benefits, this command, control and communications (C3) network includes the dangerous consequence of eroding the autonomy of tactical command through enhanced micromanagement by risk-averse operational commanders...

  5. Design scenarios for renovation of sports complex: a case study

    Science.gov (United States)

    Nižetić, S.

    2018-02-01

    This paper elaborates design scenarios for a sports complex in Croatia from a technical and economic aspect. Different energy options are analysed and two are additionally addressed and discussed as the most viable ones. The possibilities of sports complex renovation are shown by properly choosing the appropriate energy concept and thus reducing the overall cost for produced thermal energy by around 33% and reducing the carbon dioxide emission by a factor of 1.8 in comparison with its present state. Finally, this study presents an example of good practice, where renewable energy solutions can be proposed and where it is possible to cover around 70-80% of overall yearly costs from achieved energy savings for the novel plant that is assumed to be financed through a bank loan.

  6. Defining Sustainability in Relation to the Renovation of Modern Housing

    DEFF Research Database (Denmark)

    Peters, Terri

    Summary This paper focuses on comparing practice-based and academic definitions and metrics of “sustainability” as they relate to the transformation of Modern housing in Denmark. Keywords:Sustainability, Renovation, Architecture, Denmark, Modern housing 1. Introduction to the Study Buildings......”. 2. Background to the Study and Study Context Despite the increasing focus on low energy buildings and sustainability, the definitions of key terms in these areas are unclear. This paper focuses on architectural approaches to sustainable building, rather than engineering or other ways of approaching...... process, and how successfully they were used. Data collected includes definitions of sustainability from outside of the profession, as well as in architectural literature. Definitions used in the context of architectural practice were also studied. The definitions from selected key texts were compared...

  7. Indoor climate quality after renovation for improved energy efficiency

    DEFF Research Database (Denmark)

    Gunnarsen, Lars Bo; Løck, Sebastian; Kolarik, Barbara

    2016-01-01

    The building sector is responsible for approximately 40 % of the Danish energy consumption. As every year less than 1 % of the building stock is rebuild after demolition of old buildings, improved energy efficiency of existing buildings are in focus. In the late seventies to mid-eighties unwise...... performance. The indoor quality classifications show minor improvements. By using design tools beyond the simple legal requirements, the rental dwelling marked is a far step ahead of most retrofitting of owner-occupied dwellings and houses. The fear of indoor climate degradation from retrofitted energy saving...... measures may be countered by the use of modern design tools and attention to inner moisture membranes and needs for renovation of ventilation systems....

  8. The Use of Reference Models in Business Process Renovation

    Directory of Open Access Journals (Sweden)

    Dejan Pajk

    2010-01-01

    Full Text Available Enterprise resource planning (ERP systems are often used by companies to automate and enhance their busi- ness processes. The capabilities of ERP systems can be described by best-practice reference models. The purpose of the article is to demonstrate the business process renovation approach with the use of reference models. Although the use of reference models brings many positive effects for business, they are still rarely used in Slovenian small and medium-sized compa- nies. The reasons for this may be found in the reference models themselves as well as in project implementation methodologies. In the article a reference model based on Microsoft Dynamics NAV is suggested. The reference model is designed using upgraded BPMN notation with additional business objects, which help to describe the models in more detail.

  9. Energy renovation of an old single-family house

    DEFF Research Database (Denmark)

    Overgaard, L.L.; Tommerup, Henrik M.; Svendsen, Svend

    2005-01-01

    After having identified a large potential for profitable energy renovation of the existing building stock, a demonstration project was carried out in practice. This paper deals with the methods and results from the demonstration project concerning a 161 m² poorly insulated single-family house built...... saving improvements carried out in the project are “easy to carry out” and cost-beneficial measures such as cavity wall insulation, loft insulation, insulation of walls under windows and a new second window-frame with energy-saving glass. The work was carried out by professional contractors at a total......). If a conservative way of financing the building work of 157,000 DKK is assumed, the first year’s cost equals DKK 8,500 and the house owner will gain a net saving the first year of DKK 7,500....

  10. CERN's PS Booster LLRF renovation : plans and initial beam tests

    CERN Document Server

    Angoletta, ME; Butterworth, A; Findlay, A; Leinonen, PM; Molendijk, JC; Pedersen, F; Sanchez-Quesada, J; Schokker, M

    2010-01-01

    In 2008 a project was started to renovate the CERN's PS Booster (PSB) low-level RF (LLRF). Required LLRF capabilities include frequency program, beam phase, radial and synchronization loops. The new LLRF will control the signals feeding the three RF cavities present in each ring; it will also shape the beam in a dual harmonic mode, operate a bunch splitting and create a longitudinal blow-up. The main benefits of this new LLRF are its full remote and cycle-to-cycle controllability, built-in observation capability and flexibility. The overall aim is to improve the robustness, maintainability and reliability of the PSB operation and to make it compatible with the injection from the future Linac4. This paper outlines the main characteristics of the software and hardware building blocks. Initial beam test results and hints on the main milestones and future work are also given.

  11. Energy savings from housing: Ineffective renovation subsidies vs efficient demolition and reconstruction incentives

    International Nuclear Information System (INIS)

    Dubois, Maarten; Allacker, Karen

    2015-01-01

    Energy savings in the housing sector are key to reduce global greenhouse gas emissions. Policies to incentivize energy savings are however disparate between countries. Taking into account environmental aspects and consumer surplus, the paper uses a stylized economic model to assess the effectiveness and efficiency of three economic instruments: subsidies for renovation, subsidies for demolition and reconstruction projects and subsidies for building new houses on virgin land. The assessment also relates to differentiated value added taxes and other financial incentives such as green loans. In a counter-intuitive way, the model highlights that subsidies for renovations with minor energy gains worsen the overall energy consumption of housing due to the inducement of lock-ins with energy inefficient houses. Structural changes are needed in the use of policy instruments. First, commonly applied support schemes for renovations with minor energy savings should be abolished. Second, scarce public resources should incentivize deep renovation and demolition and reconstruction. Finally, taxes should apply on the use of virgin land to persuade households with a high willingness to pay for a new house, to invest in demolition and reconstruction. - Highlights: • Renovation subsidies worsen overall energy consumption of housing. • Renovation induces a lock-in with energy inefficient houses. • Renovation subsidies should be abolished or structurally reformed. • Policy should incentivize demolition and reconstruction projects. • Building on virgin land should be taxed.

  12. A hybrid decision support system for sustainable office building renovation and energy performance improvement

    Energy Technology Data Exchange (ETDEWEB)

    Juan, Yi-Kai [Department of Architecture, National Taiwan University of Science and Technology (NTUST) (China); Center for Sustainable Development and Global Competitiveness, Stanford University (United States); Gao, Peng [Department of Traffic and Transportation Engineering, Tongji University (China); Wang, Jie [Center for Sustainable Development and Global Competitiveness, Stanford University (United States)

    2010-03-15

    Energy consumption of buildings accounts for around 20-40% of all energy consumed in advanced countries. Over the last decade, more and more global organizations are investing significant resources to create sustainably built environments, emphasizing sustainable building renovation processes to reduce energy consumption and carbon dioxide emissions. This study develops an integrated decision support system to assess existing office building conditions and to recommend an optimal set of sustainable renovation actions, considering trade-offs between renovation cost, improved building quality, and environmental impacts. A hybrid approach that combines A* graph search algorithm with genetic algorithms (GA) is used to analyze all possible renovation actions and their trade-offs to develop the optimal solution. A two-stage system validation is performed to demonstrate the practical application of the hybrid approach: zero-one goal programming (ZOGP) and genetic algorithms are adopted to validate the effectiveness of the algorithm. A real-world renovation project is introduced to validate differences in energy performance projected for the renovation solution suggested by the system. The results reveal that the proposed hybrid system is more computationally effective than either ZOGP or GA alone. The system's suggested renovation actions would provide substantial energy performance improvements to the real project if implemented. (author)

  13. 10 commandments of smile esthetics

    Science.gov (United States)

    Machado, Andre Wilson

    2014-01-01

    The search for esthetic treatment has persisted in the routine of dental professionals. Following this trend, dental patients have sought treatment with the primary aim of improving smile esthetics. The aim of this article is to present a protocol to assess patient's smile: The 10 Commandments of smile esthetics. PMID:25279532

  14. United States Southern Command * Home

    Science.gov (United States)

    or concerns please email or call us at 305-437-2287. Testing The USAG- Miami Joint Education Testing the Air Force | The Air University | US Air Force Academy Army: Army Continued Education System | Army Marine Corps Institute | US Marine Corps Training and Education Command | US Marine Corps University Navy

  15. We forgot half of the population! The significance of gender in Danish energy renovation projects

    DEFF Research Database (Denmark)

    Tjørring, Lise

    2016-01-01

    that the way people live their everyday lives plays a crucial role in understanding why they choose whether to perform an energy renovation. This study is based on an anthropological investigation of ten Danish families and their decision-making process while receiving free energy advice, which, in many cases......, ended as an energy renovation project in the home. During the study, gender emerged as a significant factor in two ways. First, energy renovations were perceived differently by men and women as a consequence of their different everyday practices. Second, there was a cultural norm about the division...... that contains different gender practices and cultural influences....

  16. Renovation of the sealing planes of WWER-400 reactors pressure vessel

    International Nuclear Information System (INIS)

    Jablonicky, P.; Pilat, P.

    2007-01-01

    An article describes technical solution for renovation of the sealing planes of WWER-440 reactor's pressure vessel. Four nickel sealing rings placed in four concentric grooves are providing hermetic sealing between the vessel and the lid of this type of the reactor. Impeccable seal of the reactor's pressure vessel, where the fission reaction takes place, represents a basic security factor for safe electric energy production. Principle of renovation of the reactor's pressure vessel and lid sealing planes is based on mechanical enlargement of defective grooves and following cladding of the new material by TIG welding. Final step for renovation includes machining of new grooves according to geometrical and surface quality requirements (Authors)

  17. Energy Use and Indoor Climate in Two Schools Before and After Deep Energy Renovation

    DEFF Research Database (Denmark)

    Rose, Jørgen; Thomsen, Kirsten Engelund; Mørck, Ove

    2013-01-01

    . The 7 buildings are being energy renovated and monitored with support from the EU-CONCERTO initiative as part of the project “Cost-effective Low-energy Advanced Sustainable So1utions – Class1”. The buildings are very different and therefore the energy renovations to take place will also vary from...... insulation of piping and improved control (Building Energy Management Systems – BEMS). This paper presents preliminary results of analysis and monitoring of energy use and indoor climate in the two public schools before and after deep energy renovation....

  18. Effect of energy renovation on indoor air quality in multifamily residential buildings in Slovakia

    DEFF Research Database (Denmark)

    Földváry, Veronika; Bekö, Gabriel; Langer, Sarka

    2017-01-01

    efficiency of these buildings rarely consider their impact on the indoor air quality (IAQ). The objective of the present study was to evaluate the impact of simple energy renovation on IAQ, air exchange rates (AER) and occupant satisfaction in Slovak residential buildings. Three pairs of identical naturally...... of nitrogen dioxide (NO2), formaldehyde and total and individual volatile organic compounds (VOC) were also measured. CO2 concentrations were significantly higher and AERs were lower in the renovated buildings. Formaldehyde concentrations increased after renovation and were positively correlated with CO2...

  19. APOLLO 10 ASTRONAUT ENTERS LUNAR MODULE SIMULATOR

    Science.gov (United States)

    1969-01-01

    Apollo 10 lunar module pilot Eugene A. Cernan prepares to enter the lunar module simulator at the Flight Crew Training Building at the NASA Spaceport. Cernan, Apollo 10 commander Thomas P. Stafford and John W. Young, command module pilot, are to be launched May 18 on the Apollo 10 mission, a dress rehearsal for a lunar landing later this summer. Cernan and Stafford are to detach the lunar module and drop to within 10 miles of the moon's surface before rejoining Young in the command/service module. Looking on as Cernan puts on his soft helmet is Snoopy, the lovable cartoon mutt whose name will be the lunar module code name during the Apollo 10 flight. The command/service module is to bear the code name Charlie Brown.

  20. 32 CFR 700.1053 - Commander of a task force.

    Science.gov (United States)

    2010-07-01

    ... 32 National Defense 5 2010-07-01 2010-07-01 false Commander of a task force. 700.1053 Section 700... Command Detail to Duty § 700.1053 Commander of a task force. (a) A geographic fleet commander, and any other naval commander, may detail in command of a task force, or other task command, any eligible...

  1. Ready...Set... Command! Rethinking Training for Squadron Commanders

    Science.gov (United States)

    2016-02-16

    commander faces many difficult challenges. When discussing the Air Force’s troubling trend in suicide rates, Airmen “blame being overworked ...Air Forces total suicides despite making up only 16 percent of the service.3 Three years later the Air Force Times reveals continued challenges in...23 challenges. They must address complex issues facing the Air Force, such as troubling suicide rates, manning shortfalls, decreasing resources

  2. 76 FR 19893 - Unified Command Plan 2011

    Science.gov (United States)

    2011-04-08

    ... Plan 2011 Memorandum for the Secretary of Defense Pursuant to my authority as Commander in Chief, I hereby approve and direct the implementation of the revised Unified Command Plan. Consistent with title...

  3. Issues and Solutions for Command Post Simulations

    National Research Council Canada - National Science Library

    Stytz, Martin R; Banks, Sheila B

    2006-01-01

    .... Unfortunately, the modeling of joint command post teams is still very much in its infancy and this lack of foundational research hinders our ability to assess the performance of command post teams...

  4. Command Decision-Making: Experience Counts

    National Research Council Canada - National Science Library

    Wolgast, Kelly A

    2005-01-01

    Decision-making is the mainstay of military leadership and command. Due to the changed nature of the current military environment, military commanders can no longer rely solely on the traditional Military Decision-making Process (MDMP...

  5. Decision-making in the Pre-design Stage of Sustainable Building Renovation Projects

    DEFF Research Database (Denmark)

    Gade, Anne Nørkjær; Jensen, Rasmus Lund; Larsen, Tine Steen

    2017-01-01

    There is a great potential in renovating our existing building stock, in terms of improving environmental, economic and social qualities. Meeting the increasing performance requirements for sustainable construction entails an increasing level of complexity in the design process of both new...... buildings and renovation projects. Decision support tools are one solution that can help the building owner manage this complexity. This study investigates the current decision-making processes among Danish professional building owners, in order to propose a conceptual framework for future decision support...... tools for sustainable renovation. Design Science Research Methodology has been used as the main methodological framework. Current practices for setting goals for sustainability, determining the current state of the buildings and prioritizing which buildings to renovate within a building portfolio, have...

  6. 76 FR 47917 - Lead; Clearance and Clearance Testing Requirements for the Renovation, Repair, and Painting Program

    Science.gov (United States)

    2011-08-05

    ... available, e.g., Confidential Business Information (CBI) or other information whose disclosure is restricted... to window replacement to complete kitchen and bath renovations to building additions and everything...

  7. The University of Michigan, Kellogg Building Expansion & Renovation, Ann Arbor, Michigan.

    Science.gov (United States)

    Design Cost Data, 2001

    2001-01-01

    Presents design, construction, and cost data for the University of Michigan's Kellogg Building expansion and renovation project. A list of project manufacturers and suppliers is provided along with four photographs and four floor plans. (GR)

  8. Business models for full service energy renovation of single-family houses in Nordic countries

    DEFF Research Database (Denmark)

    Mahapatra, Krushna; Gustavsson, Leif; Haavik, Trond

    2013-01-01

    the similarities are on how the service is provided. Even though there is strong business potential for one-stop-shop energy renovation concept, still it has been somewhat difficult to start or run such a business. Various options to overcome the hindrances to promote energy efficient renovation of detached houses...... markets are dominated by handicraft-based individual solutions. In this paper we have analyzed the opportunities for implementation of one-stop-shop business models where an overall contractor offers full-service renovation packages including consulting, independent energy audit, renovation work, follow......-up (independent quality control and commissioning) and financing. A comparative assessment of emerging business models in the Nordic countries shows that different types of actors can provide such a service. Financing is included in some models. There are differences in how customers are contacted, while...

  9. Architects and Librarians under Pressure: Dialoguing about Renovation of a Library in a Constrained Environment

    Directory of Open Access Journals (Sweden)

    André Lohisse

    2008-09-01

    Full Text Available A librarian and an architect conduct the essential dialogue involved in renovating an academic library in Paris, comparing architectural concerns with the exigencies of public use, and juxtaposing technical requirements with the functional organisation of the library.

  10. On Preparing for Squadron Command

    Science.gov (United States)

    1988-04-01

    Gortler, Majur Gordon D. "Management Development---Could the Air Force Be Doing More?" Resear,;h Study, Air Command and Staff College. 1 07:3. 20...ABSTRACT (Continue on reverse If necessary and identify by block number) -This study addresses the broad issue of preparing Air Force officers for...are obsolete. SECURITY CLASSIFICATION OF THIS PAGE UNCLASSIFIED - - PREFACE This study addresses the broad Issue of preparing Air Force officers to

  11. Command and Control : faster decisions

    CSIR Research Space (South Africa)

    Venter, C

    2012-10-01

    Full Text Available Decisions 4th Biennial Conference Presented by Cobus Venter 10 October 2012 ? CSIR 2012 Slide 2 Command and Control Planning TaskingControl Assessment Si tu at io n DPSS Objective Ends Increase the Defence Capability of South Africa Ways... Supported by SAAB THALES Global CommsDPSS DDSI ERGOTECH Cooperation to make it work Example 1: Future SA Army Strategy and Joint Operations Support Campus Experiment Example 1: Future SA Army Strategy and Joint Operations Support Campus Experiment...

  12. Leveraging Limited Scope for Maximum Benefit in Occupied Renovation of Uninsulated Cold Climate Multifamily Housing

    Energy Technology Data Exchange (ETDEWEB)

    Neuhauser, K. [Building Science Corporation (BSC), Somer, MA (United States); Bergey, D. [Building Science Corporation (BSC), Somer, MA (United States); Osser, R. [Building Science Corporation (BSC), Somer, MA (United States)

    2012-03-01

    This project examines a large-scale renovation project within a 500 unit, 1960's era subsidized urban housing community. This research focuses on the airflow control and window replacement measures implemented as part of the renovations to the low-rise apartment buildings. The window replacement reduced the nominal conductive loss of the apartment enclosure by approximately 15%; air sealing measures reduced measured air leakage by approximately 40% on average.

  13. Aspinall Courthouse: GSA's Historic Preservation and Net-Zero Renovation Case Study

    Energy Technology Data Exchange (ETDEWEB)

    Chang, R.; Hayter, S.; Hotchkiss, E.; Pless, S.; Sielcken, J.; Smith-Larney, C.

    2014-10-01

    The federal government is mandated with improving efficiency of buildings, incorporating renewable energy, and achieving net-zero energy operations where possible. These challenges led GSA to consider aligning historic preservation renovations with net-zero energy goals. The Wayne N. Aspinall Federal Building and U.S. Courthouse (Aspinall Courthouse), in Grand Junction, Colorado, is an example of a renovation project that aimed to accomplish both historic preservation and net-zero energy goals.

  14. Cost-optimal energy performance renovation measures of educational buildings in cold climate

    International Nuclear Information System (INIS)

    Niemelä, Tuomo; Kosonen, Risto; Jokisalo, Juha

    2016-01-01

    Highlights: • The proposed national nZEB target can be cost-effectively achieved in renovations. • Energy saving potential of HVAC systems is significant compared to the building envelope. • Modern renewable energy production technologies are cost-efficient and recommendable. • Improving the indoor climate conditions in deep renovations is recommendable. • Simulation-based optimization method is efficient in building performance analyzes. - Abstract: The paper discusses cost-efficient energy performance renovation measures for typical educational buildings built in the 1960s and 1970s in cold climate regions. The study analyzes the impact of different energy renovation measures on the energy efficiency and economic viability in a Finnish case study educational building located in Lappeenranta University of Technology (LUT) campus area. The main objective of the study was to determine the cost-optimal energy performance renovation measures to meet the proposed national nearly zero-energy building (nZEB) requirements, which are defined according to the primary energy consumption of buildings. The main research method of the study was simulation-based optimization (SBO) analysis, which was used to determine the cost-optimal renovation solutions. The results of the study indicate that the minimum national energy performance requirement of new educational buildings (E_p_r_i_m_a_r_y ⩽ 170 kWh/(m"2,a)) can be cost-effectively achieved in deep renovations of educational buildings. In addition, the proposed national nZEB-targets are also well achievable, while improving the indoor climate (thermal comfort and indoor air quality) conditions significantly at the same time. Cost-effective solutions included renovation of the original ventilation system, a ground source heat pump system with relatively small dimensioning power output, new energy efficient windows and a relatively large area of PV-panels for solar-based electricity production. The results and

  15. Business models for full service energy renovation of single-family houses in Nordic countries

    International Nuclear Information System (INIS)

    Mahapatra, Krushna; Gustavsson, Leif; Haavik, Trond; Aabrekk, Synnøve; Svendsen, Svend; Vanhoutteghem, Lies; Paiho, Satu; Ala-Juusela, Mia

    2013-01-01

    Highlights: ► In the Nordic countries there is significant primary energy saving potential in single-family houses from 1970s. ► There are several behavioral, economical and market related hindrances to adoption of energy efficiency measures. ► One-stop-shop business models to offer full service energy renovation packages are slowly emerging. ► Marketing strategies and policy measures are required to promote full service energy renovation of single-family house. - Abstract: In Nordic countries significant primary energy saving potential exists in houses built before 1980. These old houses need to be renovated, which provides an opportunity for implementation of energy efficiency measures. However, there are several economic and market hindrances and the renovation markets are dominated by handicraft-based individual solutions. In this paper we have analyzed the opportunities for implementation of one-stop-shop business models where an overall contractor offers full-service renovation packages including consulting, independent energy audit, renovation work, follow-up (independent quality control and commissioning) and financing. A comparative assessment of emerging business models in the Nordic countries shows that different types of actors can provide such a service. Financing is included in some models. There are differences in how customers are contacted, while the similarities are on how the service is provided. Even though there is strong business potential for one-stop-shop energy renovation concept, still it has been somewhat difficult to start or run such a business. Various options to overcome the hindrances to promote energy efficient renovation of detached houses are discussed

  16. The Use of UAV in Housing Renovation Identification: A Case Study at Taman Manis 2

    Science.gov (United States)

    Mustaffa, A. A.; Hasmori, M. F.; Sarif, A. S.; Ahmad, N. F.; Zainun, N. Y.

    2018-04-01

    Housing industry in Malaysia is growing rapidly due to the increase in population and the arising of economic level of Malaysian people. Most residential houses are built according to the standard residential design that may lead to house renovation by the buyers after purchasing the house. A method of using Unmanned Aerial Vehicle (UAV) monitoring was used to obtain information of the renovated houses directly on-site at Taman Manis 2, Parit Raja, Batu Pahat. Through comparison of image captured by the UAV with the original house plans, we found out that a total of 160 units out of 336 units of houses undergo a renovation process. Surprisingly, 41 units have been renovated illegally which has 40% to 96% of renovation rate. The acquired data were analyzed and can be concluded that the method of using UAVs to obtain information is highly recommended. The study is expected to help Municipal Council to detect improper & illegal renovation by the residents in a residential area.

  17. Wastewater renovation using constructed soil filter (CSF): a novel approach.

    Science.gov (United States)

    Nemade, P D; Kadam, A M; Shankar, H S

    2009-10-30

    Constructed soil filter (CSF) also known as Soil Biotechnology (SBT) is a process for water renovation which makes use of formulated media with culture of soil macro- and microorganisms. CSF combines sedimentation, infiltration and biodegradation processes to remove oxidizable organics and inorganics of wastewater in a single facility. Operating experience shows hydraulic loading in the range of 0.05-0.25 m(3)/m(2) h and organic loading up to 200-680 g/m(2) d. The results show increase in dissolved oxygen levels, COD removal (from 352 mg/l to 20 mg/l); BOD removal (from 211 mg/l to 7.0 mg/l); suspended solids removal (from 293 mg/l to 16 mg/l); turbidity reduction (from 145 NTU to 5.3 NTU); iron (from 5 mg/l to 0.3 mg/l); arsenic (from 500 microg/l to 10 microg/l); total coliform and fecal coliform removal (from 145 x 10(5) to 55 CFU/100 mL and 150 x 10(8) to 110 CFU/100 mL respectively), with desired pathogen levels as per WHO standards, i.e. aeration and no odor, fish compatible water quality and evergreen ambience.

  18. A framework for sustainability science: a renovated IPAT identity.

    Science.gov (United States)

    Waggoner, P E; Ausubel, J H

    2002-06-11

    Learning actors' leverage for change along the journey to sustainability requires quantifying the component forces of environmental impact and integrating them. Population, income, consumers' behavior, and producers' efficiency jointly force impact. Here, we renovate the "IPAT Identity" to identify actors with the forces. Forcing impact I are P for population, A for income as gross domestic product (GDP) per capita, C for intensity of use as a good per GDP, and T for efficiency ratios as impact per good. In the "ImPACT Identity," parents modify P, workers modify A, consumers modify C, and producers modify T. Because annual percentage changes in component forces add to a change in national impact, actors' leverage is reflected transparently in consistent units of annual percentage changes that can be compared from force to force. Examples from energy and food, farming and manufacturing, and steel and water show that declining C, called dematerialization, can temper the sustainability challenge of growth (P x A), and that innovation or efficient technology that lowers T can counter rising consumption (P x A x C). Income elasticity can accommodate connections between income and other forces. From rates of change of forces, the identity can forecast impacts. Alternatively, by identifying the necessary change in forces to cause a projected impact, ImPACT can assay the likelihood and practicability of environmental targets and timetables. An annual 2-3% progress in consumption and technology over many decades and sectors provides a benchmark for sustainability.

  19. Renovation of food-processing wastewater by a Riparian wetland

    Science.gov (United States)

    Baillie, Priscilla W.

    1995-01-01

    Treated wastewater from a food-processing plant, together with intermittent outflow from a hypereutrophic pond, were discharged over a 20-year period to a cattail-dominated wetland and hence to a small stream. Organics and nutriet levels in the effluent were comparable to levels in domestic wastewater. Fifteen variables were monitored upstream and downstream from the plant over 18 months. Means for most variables were slightly higher downstream, but differences between stations were not statistically significant. Wetland processing of nitrogen was markedly affected by a change from drought to flood conditions. After accounting for dilution, the overall effect of the wetland on the effluent was to reduce biological oxygen demand 43.7%, ammonia N 46.3%, nitrate/nitrite N 17.4%, and conductivity 15.6%. However, total suspended solids were increased 41.4%, total organic nitrogen 28.8%, and total phosphorus 24.7%. It was concluded that the wetland effectively renovated the effluent but the removal efficiency would be improved if the effluent were pretreated to reduce phosphorus and dispersed to increase residence time in the wetland.

  20. Using a One-Stop-Shop Concept to Guide Decisions when Single-Family Houses are renovated

    DEFF Research Database (Denmark)

    Grøn Bjørneboe, Matilde; Svendsen, Svend; Heller, Alfred

    2017-01-01

    of renovation. The scope of the project was to carry out renovations on up to three houses. The project revealed that the concept on its own was not enough to motivate the house owners to engage in extensive renovation. However, interviews with the house owners indicated that the renovations that took place had...... was to determine how a one-stop-shop (OSS) or full-service concept could be used to guide the extensive energy renovation of single-family houses. The purpose was partly to identify the benefits and disadvantages of using the concept and partly to evaluate the potential of the OSS concept for increasing the degree...... probably been expanded and improved with the use of the concept and that the renovations in general benefitted from an independent adviser....

  1. Commanders of the Great Victory

    Directory of Open Access Journals (Sweden)

    Anatoly Dmitriyevich Borshchov

    2015-01-01

    Full Text Available The honorary title of «commander» as well as the «admiral» is granted to a military or naval figure on the basis of public recognition of his personal contribution to the success of actions. Generals are usually individuals with creative thinking, the ability to foresee the development of military events. Generals usually have such personality traits as a strong will and determination, rich combat experience, credibility and high organizational skills. In an article dedicated to the 70th anniversary of the Soviet victory in the Great War examines the experience of formation and practice of the most talent-ed Soviet military leaders.

  2. Lowell Observatory's 24-inch Clark Refractor: Its History and Renovation

    Science.gov (United States)

    Schindler, Kevin; Nye, Ralph; Rosenthal, Peter

    2016-01-01

    In 1895, Percival Lowell hired eminent telescope maker Alvan G. Clark to build a 24-inch refractor. Lowell intended the telescope intitally for observing Mars in support of his controversial theories about life on that planet. Clark finished the telescope within a year and at a cost of $20,000. Lowell and his staff of assistants and astronomers began observing through it on July 23, 1896, setting off a long and productive career for the telescope.While Lowell's Mars studies dominated early work with the Clark, V.M. Slipher by the 1910s was using it to observe planetary rotations and atmospheric compositions. He soon revolutionized spectroscopic studies, gathering excruciatingly long spectra - some in excess of 40 hours - of the so-called white nebula and determining startling radial velocities, evidence of an expanding universe. In the 1960s, scientists and artists teamed up on the Clark and created detailed lunar maps in support of the Apollo program.In recent decades, the Clark has played a central role in the education programs at Lowell, with general public audiences, students, and private groups all taking advantage of this unique resource.With this nearly 120 years of contant use, the Clark had been wearing down in recent years. The telescope was becoming more difficult to move, old electrical wiring in the dome was a fire hazard, and many of the telescope's parts needed to be repaired or replaced.In 2013, Lowell Observatory began a fundraising campaign, collecting $291,000 to cover the cost of dome and telescope renovation. Workers removed the entire telescope mount and tube assembly from the dome, examining every part from tube sections to individuals screws. They also stabilized the dome, adding a water vapor barrier and new outer wall while reinforcing the upper dome. The project lasted from January, 2014 through August, 2015. The facility reopened for daytime tours in September, 2015 and evening viewing the following month.

  3. Carbon balance of renovated grasslands: input- or output-driven?

    Science.gov (United States)

    Choncubhair, Órlaith Ní; Osborne, Bruce; Lanigan, Gary

    2015-04-01

    Temperate grasslands constitute over 30% of the Earth's naturally-occurring biomes and make an important contribution towards the partial mitigation of anthropogenic greenhouse gas emissions by terrestrial ecosystems. In permanent temperate grasslands, biomass production and sward quality can deteriorate over time and periodic renovation activities, involving soil tillage and reseeding, are commonly carried out to halt this decline. Long-term cultivation of agricultural land has been associated with soil aggregate degradation and reduced soil carbon storage. However, the impact of these single tillage disturbances on C cycling in grasslands is less clear. This study evaluated gaseous and dissolved organic carbon (DOC) losses following a single tillage event by subjecting grassland lysimeters with contrasting soil drainage characteristics to simulated conventional inversion or minimum tillage. Field-scale CO2 emissions after conventional tillage were also quantified and empirically modelled over short- and medium-term timeframes to delineate the ecosystem response to environmental variables. Soil moisture was the limiting determinant of ecosystem carbon release following conventional tillage. Freshly-tilled soils were associated with reduced water retention and increased sensitivity to soil moisture, which was particularly pronounced following rewetting events. Significantly elevated but ephemeral CO2 effluxes were detected in the hours following inversion ploughing, however tillage disturbance did not generate significantly enhanced C emission rates in the medium term. Equally, DOC losses were not significantly amplified by conventional tillage compared with conservative minimum tillage and were predominantly controlled by soil drainage across tillage regimes. Our results suggest that a net ecosystem source of 120 to 210 g C m-2 over an approximately two-month period was most likely a consequence of reduced productivity and C input rather than enhanced soil CO2

  4. How to get residents/owners in housing cooperatives to agree on sustainable renovation

    Energy Technology Data Exchange (ETDEWEB)

    Lappegard Hauge, A. [SINTEF Building and Infrastructure, P.O. Box 124, Blindern, 0314 Oslo (Norway); Thomsen, J. [SINTEF Building and Infrastructure, 7465 Trondheim (Norway); Loefstroem, E. [SINTEF Building and Infrastructure, 7491 Trondheim (Norway)

    2013-05-15

    What factors increase the chance that residents/owners in housing cooperatives agree on sustainable energy efficient renovation? Based on 30 qualitative interviews with professional advisors in cooperative housing associations and chairman/board and residents in three chosen case studies, an analysis of opportunities and barriers for making a common decision on renovation is performed. Success criteria and barriers are found on the societal level as well as on the organizational/individual level. The barriers and success criteria identified on the societal level are: knowledge level on energy-efficient renovation among relevant actors, owner structure of the housing cooperative, and existing regulations and incentives. On the organizational and individual level, the following categories influencing renovation processes were identified: the time frame and organization of the process, understanding the residents' needs, economy, the information given, and the existence of available exemplary projects and role models. Based on the results of the study, ten guidelines that contribute to more successful decision making processes and increase the chances of sustainable energy efficient renovation in housing cooperatives are presented.

  5. Scale-free Enterprise Command & Control

    National Research Council Canada - National Science Library

    Bayne, Jay; Paul, Raymond

    2005-01-01

    ...) services that provide allied teams of commanders, planners and operations personnel with collaborative, grid-based and realtime situation assessment, plan generation, and plan execution services...

  6. Blossom Point Satellite Tracking and Command Station

    Data.gov (United States)

    Federal Laboratory Consortium — FUNCTION: The Blossom Point Satellite Command and Tracking Facility (BP) provides engineering and operational support to several complex space systems for the Navy...

  7. Structured multi-stream command language

    International Nuclear Information System (INIS)

    Glad, A.S.

    1982-12-01

    A multi-stream command language was implemented to provide the sequential and decision-making operations necessary to run the neutral-beam ion sources connected to the Doublet III tokamak fusion device. A multi-stream command language was implemented in Pascal on a Classic 7870 running under MAX IV. The purpose of this paper is threefold. First, to provide a brief description of the programs comprising the command language including the operating system interaction. Second, to give a description of the language syntax and commands necessary to develop a procedure stream. Third, to provide a description of the normal operating procedures for executing either the sequential or interactive streams

  8. Command and Control for Homeland Security

    National Research Council Canada - National Science Library

    Greene, Marjorie

    2007-01-01

    ... Analysis of the Toronto SARS Outbreak, Vertical Integration, Vertical Integration in a Military Command Hierarchy, Information flows for a domestic incident, C2 for Homeland Security will benefit...

  9. Mission Command: Elasticity, Equilibrium, Culture, and Intent

    National Research Council Canada - National Science Library

    Stewart, Keith G

    2006-01-01

    .... It is enabled by decentralization of authority and responsibility that allows subordinate commanders the latitude to plan and conduct operations based upon their understanding of the local situation...

  10. Environment Modules on the Peregrine System | High-Performance Computing |

    Science.gov (United States)

    NREL Environment Modules on the Peregrine System Environment Modules on the Peregrine System Peregrine uses environment modules to easily manage software environments. Environment modules facilitate modules commands set up a basic environment for the default compilers, tools and libraries, such as the

  11. Command and Control Software Development

    Science.gov (United States)

    Wallace, Michael

    2018-01-01

    The future of the National Aeronautics and Space Administration (NASA) depends on its innovation and efficiency in the coming years. With ambitious goals to reach Mars and explore the vast universe, correct steps must be taken to ensure our space program reaches its destination safely. The interns in the Exploration Systems and Operations Division at the Kennedy Space Center (KSC) have been tasked with building command line tools to ease the process of managing and testing the data being produced by the ground control systems while its recording system is not in use. While working alongside full-time engineers, we were able to create multiple programs that reduce the cost and time it takes to test the subsystems that launch rockets to outer space.

  12. Curricular renovation in the phonoaudiology program of the University of Cauca: a proposal for educational quality

    Directory of Open Access Journals (Sweden)

    Liliana María Pérez-Tenorio

    2010-09-01

    Full Text Available In Colombia, the Superior Education is going through a transformation process. These changes must be in coherence with the formulation of flexible policies among the diverse components of the curriculum and with the need for new forms of working and producing knowledge. The curricular renovation must ref lect an educational quality compromise and contribute to generate human development with high social impact. This article presents a proposal for Curricular Renovation, elaborated by faculty and students of the Phonoaudiology Program of the University of Cauca. This document contains aspects related to the pedagogic model, didactics, faculty-student relation, systems of evaluation and plan of studies. Furthermore, in this document the bases for the Route of Curricular Renovation are presented, consisting of the following phases: background, diagnosis and operational plan. These should facilitate the academic integration for adjusting the curricular processes to the needs of the academic program in a local, national and international context.

  13. Method for planning extensive energy renovation of detached single-family houses

    DEFF Research Database (Denmark)

    Grøn Bjørneboe, Matilde

    , and 22% occurs in single-family houses, making this the largest single contributor to the total consumption after road transport (DEA, 2015a). There is a large potential for achieving energy savings in this sector, especially among the large number of single-family houses built in the 1960s and 1970s...... that the use of this approach produced a better renovation with a larger energy saving. The initial evaluation helped the house owners identify a maintenance backlog, and the use of an independent advisor helped ensure quality throughout the process. Renovations are too often carried out for just one purpose......: maintenance, to update functions or to reduce energy consumption. But a lot can be gained by combining these efforts, which can reduce expenses for planning and execution and avoid doing things twice. Research for this thesis demonstrated this approach by carrying out a renovation based on maintenance...

  14. Sustainable Renovation of Residential Buildings and the Landlord/Tenant Dilemma

    DEFF Research Database (Denmark)

    Ástmarsson, Björn; Jensen, Per Anker; Maslesa, Esmir

    2013-01-01

    solutions can help solve the landlord/tenant dilemma in relation to sustainable renovation of residential buildings, and how the general awareness of sustainable renovation can be increased. Particular focus is on whether tools like energy performance contracting and energy labeling can help solve......The landlord/tenant dilemma arises when the interests of landlords and tenants misalign and is one of the greatest barriers hindering the development of sustainable renovation of residential buildings in Europe. The aim of this research is to investigate how regulatory changes and contractual...... be overcome with a package solution. In the Danish national context the package solution must consist of legislative changes, financial incentives and better dissemination of information. Therefore, an array of different tools must be integrated and used in cooperation to overcome the dilemma....

  15. Full-service concept for energy efficient renovation of single-family houses

    DEFF Research Database (Denmark)

    Vanhoutteghem, Lies; Tommerup, Henrik M.; Svendsen, Svend

    2011-01-01

    the solutions. Such one-stop-shops in the form of full-service providers of energy efficient renovation of single-family house are missing in the Nordic countries, although this service is vital to open up the market. As part of the Nordic research project `SuccesFamilies´ with the purpose to change...... houses. A one-stop-shop in the form of a full-service concept could be seen as a possibility to make it easy for the homeowner to comply with possible future requirements to realize far-reaching energy savings in connection with extensive renovations, provided that the building sector offers...... includes an ideal full-service concept and technical renovation solutions targeted to different types of single-family houses....

  16. Decision Support Model for Mosque Renovation and Rehabilitation (Case Study: Ten Mosques in Jakarta Barat, Indonesia)

    Science.gov (United States)

    Utama, D. N.; Triana, Y. S.; Iqbal, M. M.; Iksal, M.; Fikri, I.; Dharmawan, T.

    2018-03-01

    Mosque, for Muslim, is not only a place for daily worshipping, however as a center of culture as well. It is an important and valuable building to be well managed. For a responsible department or institution (such as Religion or Plan Department in Indonesia), to practically manage a lot of mosques is not simple task to handle. The challenge is in relation to data number and characteristic problems tackled. Specifically for renovating and rehabilitating the damaged mosques, a decision to determine the first damaged mosque priority to be renovated and rehabilitated is problematic. Through two types of optimization method, simulated-annealing and hill-climbing, a decision support model for mosque renovation and rehabilitation was systematically constructed. The method fuzzy-logic was also operated to establish the priority of eleven selected parameters. The constructed model is able to simulate an efficiency comparison between two optimization methods used and suggest the most objective decision coming from 196 generated alternatives.

  17. Improved perceived indoor environment in renovated and energy-retrofitted social housing

    DEFF Research Database (Denmark)

    Knudsen, Henrik Nellemose

    2017-01-01

    , noise from outside and too little daylight. The evaluation shows that it is possible to achieve a win-win situation, with both energy savings and improved perceived indoor environment. The evaluation also reveals that careful attention is needed to avoid introducing annoying noise from new technical......The purpose of the present study was, among other things, to evaluate how tenants perceived the indoor environment in renovated and energy-retrofitted social housing erected in the 1960s. Tenants answered a questionnaire to quantify problems and satisfaction with the indoor environment before...... and after the renovation work. A majority of tenants perceived the indoor environment improved for all parameters: temperature, draught, air quality, noise and daylight, after the renovation work. In particular, the tenants experienced fewer problems with too low temperature and draught during the winter...

  18. La inversión en energías renovables en Argentina

    OpenAIRE

    Recalde, Marina

    2017-01-01

    En este artículo se analiza en qué medida los factores del entorno de la política energética de un país en desarrollo, tal como Argentina, determinan la evolución de la inversión en energías renovables. La baja calidad institucional del país ayuda a crear condiciones no propicias que contrarrestan el efecto de la política energética, reduciendo los incentivos para invertir en tecnologías renovables. Es necesario entonces mejorar las condiciones institucionales de los países en desarrollo para...

  19. Limitaciones para el desarrollo de energías renovables en Argentina

    OpenAIRE

    Marina Yesica Recalde; Daniel Hugo Bouille; Leónidas Osvaldo Girardin

    2015-01-01

    En las últimas décadas las energías renovables han cobrado impulso a nivel mundial con un significativo impacto sobre el desarrollo sustentable de las naciones. Si bien diferentes trabajos analizan la eficiencia de políticas e instrumentos para la promoción de dichas fuentes, la mayoría de las veces se deja de lado el análisis de cómo el contexto en el cual las políticas son implementadas determina su performance. En este trabajo se analiza el desarrollo de las energías renovables en el merca...

  20. Method for Developing and Assessing Holistic Energy Renovation of Multi-Storey Buildings

    DEFF Research Database (Denmark)

    Eriksen, Marlene Stenberg Hagen; Rode, Carsten; Bjarløv, Søren Peter

    A large part of the Danish building stock is from the post-war era, and thus there is an immense need for renovation within a few years. Also there is a persistent focus on energy use in buildings as it corresponds to about 40% of the total energy use in Denmark. However to secure durable solutions....... The assessment method is tested on two case buildings, and the assessment involves all relevant stakeholders including building owner, users, and caretakers. An element of the project looks to the development of new products and solutions for renovation for buildings. As part of the method, user involvement...

  1. 32 CFR 215.7 - Command relationships.

    Science.gov (United States)

    2010-07-01

    ... 32 National Defense 2 2010-07-01 2010-07-01 false Command relationships. 215.7 Section 215.7 National Defense Department of Defense (Continued) OFFICE OF THE SECRETARY OF DEFENSE (CONTINUED) MISCELLANEOUS EMPLOYMENT OF MILITARY RESOURCES IN THE EVENT OF CIVIL DISTURBANCES § 215.7 Command relationships...

  2. The Marihuana Dilemma: Challenge to Commanders.

    Science.gov (United States)

    The marihuana dilemma poses a major challenge to commanders in the US Army today. The problem was analyzed as to the characteristics of the drug...available to commanders to meet the challenge. The essay concludes that marihuana should not be legalized; drug users or former drug users should not be

  3. XTCE. XML Telemetry and Command Exchange Tutorial

    Science.gov (United States)

    Rice, Kevin; Kizzort, Brad; Simon, Jerry

    2010-01-01

    An XML Telemetry Command Exchange (XTCE) tutoral oriented towards packets or minor frames is shown. The contents include: 1) The Basics; 2) Describing Telemetry; 3) Describing the Telemetry Format; 4) Commanding; 5) Forgotten Elements; 6) Implementing XTCE; and 7) GovSat.

  4. Capturing a Commander's decision making style

    Science.gov (United States)

    Santos, Eugene; Nguyen, Hien; Russell, Jacob; Kim, Keumjoo; Veenhuis, Luke; Boparai, Ramnjit; Stautland, Thomas Kristoffer

    2017-05-01

    A Commander's decision making style represents how he weighs his choices and evaluates possible solutions with regards to his goals. Specifically, in the naval warfare domain, it relates the way he processes a large amount of information in dynamic, uncertain environments, allocates resources, and chooses appropriate actions to pursue. In this paper, we describe an approach to capture a Commander's decision style by creating a cognitive model that captures his decisionmaking process and evaluate this model using a set of scenarios using an online naval warfare simulation game. In this model, we use the Commander's past behaviors and generalize Commander's actions across multiple problems and multiple decision making sequences in order to recommend actions to a Commander in a manner that he may have taken. Our approach builds upon the Double Transition Model to represent the Commander's focus and beliefs to estimate his cognitive state. Each cognitive state reflects a stage in a Commander's decision making process, each action reflects the tasks that he has taken to move himself closer to a final decision, and the reward reflects how close he is to achieving his goal. We then use inverse reinforcement learning to compute a reward for each of the Commander's actions. These rewards and cognitive states are used to compare between different styles of decision making. We construct a set of scenarios in the game where rational, intuitive and spontaneous decision making styles will be evaluated.

  5. 32 CFR 552.65 - Command supervision.

    Science.gov (United States)

    2010-07-01

    ... 32 National Defense 3 2010-07-01 2010-07-01 true Command supervision. 552.65 Section 552.65 National Defense Department of Defense (Continued) DEPARTMENT OF THE ARMY MILITARY RESERVATIONS AND NATIONAL CEMETERIES REGULATIONS AFFECTING MILITARY RESERVATIONS Solicitation on Military Reservations § 552.65 Command supervision. (a) All insurance...

  6. A multi-methodology and sustainability-supporting framework for implementation and assessment of a holistic building renovation: Implementation and assessment of a holistic sustainable building renovation

    DEFF Research Database (Denmark)

    Kamari, Aliakbar

    . The research strategy employed in this thesis presents characteristics of two research types, namely the qualitative research approach, and the inter- or transdisciplinary research throughout mode 2. It therefore calls for an inductive research approach and involves an interpretive approach and comparative...... a deep building renovation and an ordinary one is a commitment to a holistic approach in which objectives/criteria are targeted early in the design stages and subsequently are considered for their interdependence throughout sustainability perspectives. A review of recent research has revealed...... is entitled RE-VALUE . The case study is Section 3 of Skovgårdsparken located in Brabrand, Denmark. It is a social housing complex (including nine blocks), and has been renovated by Brabrand Housing Association. The future of the research in this thesis concerns expanding of the TSBD framework for Building...

  7. High-rise build renovation - Colouring a high-rise building's facade; Renovation des Hochhauses Schoppi Spreitenbach. Farbigkeit einer Hochhausfassade

    Energy Technology Data Exchange (ETDEWEB)

    Enkerli, W.

    2008-07-01

    This illustrated article takes a look at the renovation of the 70-metres high, high-rise apartment building that forms an integral part of a large shopping centre in Spreitenbach, Switzerland. The buildings and their infrastructure, realised in 1970, were in need of renovation. The facade elements no longer met energy requirements and the shopping mall was to be extended to meet modern shopping needs. The article deals with the technical and aesthetic requirements placed on the facades. The colour concept for the venetian blinds integrated into the windows, which includes the use of 20 different shades of colour, is described. A total of 3,200 blinds are fitted. The removal of the old window elements and the fitting of the new facade elements is described and discussed.

  8. Base flow investigation of the Apollo AS-202 Command Module

    Science.gov (United States)

    Walpot, Louis M. G.; Wright, Michael J.; Noeding, Peter; Schrijer, Ferry

    2012-01-01

    A major contributor to the overall vehicle mass of re-entry vehicles is the afterbody thermal protection system. This is due to the large acreage (equal or bigger than that of the forebody) to be protected. The present predictive capabilities for base flows are comparatively lower than those for windward flowfields and offer therefore a substantial potential for improving the design of future re-entry vehicles. To that end, it is essential to address the accuracy of high fidelity CFD tools exercised in the US and EU, which motivates a thorough investigation of the present status of hypersonic flight afterbody heating. This paper addresses the predictive capabilities of afterbody flow fields of re-entry vehicles investigated in the frame of the NATO/RTO-RTG-043 task group. First, the verification of base flow topologies on the basis of available wind-tunnel results performed under controlled supersonic conditions (i.e. cold flows devoid of reactive effects) is performed. Such tests address the detailed characterization of the base flow with particular emphasis on separation/reattachment and their relation to Mach number effects. The tests have been performed on an Apollo-like re-entry capsule configuration. Second, the tools validated in the frame of the previous effort are exercised and appraised against flight-test data collected during the Apollo AS-202 re-entry.

  9. Defense Travel System: an analysis of the system's reservation module

    OpenAIRE

    Logan, Anita Guevara

    2008-01-01

    MBA Professional Report The purpose of this project is to determine if the DTS reservation module is in compliance based with the standards set by the DOD. By examining flights given in DTS and comparing them to a commercial online travel company (Expedia) will determine whether the implementation of ITA software in 2007, as part of the renovation process is effective and that the reservation module currently meeting standards. Another purpose is to determine if the system has improved...

  10. ASC Addresses Unit Commanders' Concerns through LBE and Reset Programs

    National Research Council Canada - National Science Library

    Young, Mark E

    2008-01-01

    .... Army Sustainment Command (ASC), part of the U.S. Army Materiel Command (AMC) team, is available to assist, identify, and resolve equipment and maintenance problems as well as materiel readiness issues for combatant commanders...

  11. Unity of Command in Afghanistan: A Forsaken Principle of War

    National Research Council Canada - National Science Library

    Hope, Ian

    2008-01-01

    ... in the evolution of military command for Afghanistan. It examines how there was an unprecedented departure from the principle of unity of command in Afghanistan in 2006, when Combined Forces Command-Afghanistan (CFC...

  12. Unity of Command in Afghanistan: A Forsaken Principle of War

    National Research Council Canada - National Science Library

    Hope, Ian

    2008-01-01

    ... of military command for Afghanistan. It examines the unprecedented departure from the principle of unity of command in Afghanistan in 2006, when Combined Forces Command-Afghanistan passed control of the ground fight to the International...

  13. Performance Evaluation and Improvement of a Newly-Renovated Danish School Building (Retro-commissioning)

    DEFF Research Database (Denmark)

    Liu, Li; Georgieva, Viktoriya Vasileva; Zabusova, Diana

    2017-01-01

    In this study, we analyse and evaluate the energy performance of a Danish school building 4 years after its renovation. The structure of the following paper follows four phases, which include Planning, Investigation, Implementation and Hand-off. In the Planning phase, the objectives of the retro...

  14. Effectiveness of energy renovations : a reassessment based on actual consumption savings

    NARCIS (Netherlands)

    Filippidou, F.; Nieboer, N.E.T.; Visscher, H.J.

    2018-01-01

    Energy renovations offer unique opportunities to increase the energy efficiency of the built environment and for the existing housing stock; they are the most important solution. Usually, energy savings are based on modeling calculations. However, recent research has shown that the predicted

  15. [History of the renovation of the hôtel-Dieu of Bourges].

    Science.gov (United States)

    Gitton, Philippe

    2006-01-01

    From the 16th to the 20th century "hôtel-Dieu" was the main hospital in the Berry capital. In the 30's the mayor decided to renovate the building but in 1994 the construction of a new hospital--"Centre Hospitalier Jacques-Coeur"--freed the ancient building which became a historical centre for culture et tourism in the region.

  16. Renovating process for Pressurized Water Reactor control rod assemblies and corresponding control

    International Nuclear Information System (INIS)

    Jahnke, S.; Ple, P.

    1989-01-01

    In the first PWRs the control rods are moving by the intermediary of electromagnetic mechanisms where the power fed to the electromagnets is selected by a hard wired logic circuit connected to the controldesh by another logic control. For renovating the control rod assemblies each power assembly is replaced by an electronic assembly containing an ordinator and power supply interfaces [fr

  17. Financing New Technologies, Equipment/Furniture Replacement, and Building Renovation: A Survey Report.

    Science.gov (United States)

    Shirk, Gary M.

    1984-01-01

    Reports results of survey of methods used by 77 North American academic and public libraries to finance implementation of new technologies, replace equipment and furniture, and renovate buildings. Financing methods used, frequency of use, choice, and range of methods are discussed. Eight references and list of survey participants are appended.…

  18. Super-energy wrap-up model for renovation of standard wooden houses in Greenland?

    DEFF Research Database (Denmark)

    Bjarløv, Søren Peter; Vladyková, Petra

    2012-01-01

    This paper is based on the developed theoretical practice of super-insulation solution for renovation of exiting standard wooden houses in Greenland built from 1950s until 2006, more than half the building stock in Arctic Greenland. From various perspectives, the wrap-up system is evaluated as a ...

  19. Effect of renovating an office building on occupants' comfort and health

    DEFF Research Database (Denmark)

    Pejtersen, Jan; Brohus, H.; Hyldgaard, C. E.

    2001-01-01

    . Before the floor material was installed in the office building, a full-scale exposure experiment was performed in the laboratory. The new ventilation strategy and renovation of the HVAC system were selected on the basis of laboratory experiments on a full-scale mock-up of a cellular office. The severity...

  20. Renovating Alzheimer's: "Constructive" Reflections on the New Clinical and Research Diagnostic Guidelines

    Science.gov (United States)

    George, Daniel R.; Qualls, Sara H.; Camp, Cameron J.; Whitehouse, Peter J.

    2013-01-01

    The development of disease concepts for conditions such as Alzheimer's disease (AD) is an ongoing social process that evolves over time. The biomedical paradigm about AD that has informed our culture's understanding of brain aging for the past several decades is currently undergoing a major and timely renovation in the early 21st century. This…

  1. From demonstration projects to volume market : Market development for advanced housing renovation

    NARCIS (Netherlands)

    Mlecnik, E.; Prendergast, E.; Rodsjo, A.; Haavik, T.; Parker, P.

    2010-01-01

    How do we get from demonstration projects to a volume market for very low energy demand in advanced housing renovation? The contributors to this report have been working with this issue for many years. Some worked in both IEA SHC Task 28 Sustainable Housing (2000-2005) and in SHC Task 37 Advanced

  2. Energia Renovable para Centros de Salud Rurales (Renewable Energy for Rural Health Clinics)

    Energy Technology Data Exchange (ETDEWEB)

    Jimenez, T.; Olson, K.

    1999-07-28

    Esta es la primera de una serie de guias de aplicaciones que el Programa de Energia de Villas de NREL esta comisionando para acoplar sistemas comerciales renovables con aplicaciones rurales, incluyendo agua, escuelas rurales y micro empresas. La guia esta complementada por las actividades de desarrollo del Programa de Energia de Villas de NREL, proyectos pilotos internacionales y programas de visitas profesionales.

  3. Electronic Control System Of Home Appliances Using Speech Command Words

    Directory of Open Access Journals (Sweden)

    Aye Min Soe

    2015-06-01

    Full Text Available Abstract The main idea of this paper is to develop a speech recognition system. By using this system smart home appliances are controlled by spoken words. The spoken words chosen for recognition are Fan On Fan Off Light On Light Off TV On and TV Off. The input of the system takes speech signals to control home appliances. The proposed system has two main parts speech recognition and smart home appliances electronic control system. Speech recognition is implemented in MATLAB environment. In this process it contains two main modules feature extraction and feature matching. Mel Frequency Cepstral Coefficients MFCC is used for feature extraction. Vector Quantization VQ approach using clustering algorithm is applied for feature matching. In electrical home appliances control system RF module is used to carry command signal from PC to microcontroller wirelessly. Microcontroller is connected to driver circuit for relay and motor. The input commands are recognized very well. The system is a good performance to control home appliances by spoken words.

  4. Literature review on medical incident command.

    Science.gov (United States)

    Rimstad, Rune; Braut, Geir Sverre

    2015-04-01

    It is not known what constitutes the optimal emergency management system, nor is there a consensus on how effectiveness and efficiency in emergency response should be measured or evaluated. Literature on the role and tasks of commanders in the prehospital emergency services in the setting of mass-casualty incidents has not been summarized and published. This comprehensive literature review addresses some of the needs for future research in emergency management through three research questions: (1) What are the basic assumptions underlying incident command systems (ICSs)? (2) What are the tasks of ambulance and medical commanders in the field? And (3) How can field commanders' performances be measured and assessed? A systematic literature search in MEDLINE, PubMed, PsycINFO, Embase, Cochrane Central Register of Controlled Trials, Cochrane Library, ISI Web of Science, Scopus, International Security & Counter Terrorism Reference Center, Current Controlled Trials, and PROSPERO covering January 1, 1990 through March 1, 2014 was conducted. Reference lists of included literature were hand searched. Included papers were analyzed using Framework synthesis. The literature search identified 6,049 unique records, of which, 76 articles and books where included in qualitative synthesis. Most ICSs are described commonly as hierarchical, bureaucratic, and based on military principles. These assumptions are contested strongly, as is the applicability of such systems. Linking of the chains of command in cooperating agencies is a basic difficulty. Incident command systems are flexible in the sense that the organization may be expanded as needed. Commanders may command by direction, by planning, or by influence. Commanders' tasks may be summarized as: conducting scene assessment, developing an action plan, distributing resources, monitoring operations, and making decisions. There is considerable variation between authors in nomenclature and what tasks are included or highlighted

  5. Linux Command Line and Shell Scripting Bible

    CERN Document Server

    Blum, Richard

    2011-01-01

    The authoritative guide to Linux command line and shell scripting?completely updated and revised [it's not a guide to Linux as a whole ? just to scripting] The Linux command line allows you to type specific Linux commands directly to the system so that you can easily manipulate files and query system resources, thereby permitting you to automate commonly used functions and even schedule those programs to run automatically. This new edition is packed with new and revised content, reflecting the many changes to new Linux versions, including coverage of alternative shells to the default bash shel

  6. The Linux command line a complete introduction

    CERN Document Server

    Shotts, William E

    2012-01-01

    You've experienced the shiny, point-and-click surface of your Linux computer—now dive below and explore its depths with the power of the command line. The Linux Command Line takes you from your very first terminal keystrokes to writing full programs in Bash, the most popular Linux shell. Along the way you'll learn the timeless skills handed down by generations of gray-bearded, mouse-shunning gurus: file navigation, environment configuration, command chaining, pattern matching with regular expressions, and more.

  7. Assessment of Flooring Renovations on African Elephant (Loxodonta africana) Behavior and Glucocorticoid Response

    Science.gov (United States)

    Boyle, Sarah A.; Roberts, Beth; Pope, Brittany M.; Blake, Margaret R.; Leavelle, Stephen E.; Marshall, Jennifer J.; Smith, Andrew; Hadicke, Amanda; Falcone, Josephine F.; Knott, Katrina; Kouba, Andrew J.

    2015-01-01

    Captive African (Loxodonta africana) and Asian (Elephas maximus) elephants can experience foot pathologies and arthritis. As a preventative measure against these pathologies and to alleviate the potential discomfort due to concrete substrates, some zoological institutions have renovated elephant housing to increase the amount of natural or shock-absorbent substrates. The objective of this study was to compare behavioral (diurnal and nocturnal) and glucorticoid (e.g., serum cortisol) responses of three female African elephants before, during, and after renovation to their indoor housing floor to assess whether renovations had short-term effects on the elephants’ behavior and stress physiology. Behavioral data were collected using scan-sampling methods, and activity budgets were constructed for each of the three elephants. In addition, the duration of all lying rest activities were recorded. Weekly serum cortisol concentrations were determined with enzyme immunoassay (EIA). Overall, eating was the most prevalent behavior exhibited outdoors during the day, while resting (either in a lying or standing position) were most common during the indoor, nocturnal periods. Although variation existed among the three elephants, all three females spent significantly more time walking and less time eating during the day after the completion of the renovations. The extent to which the three elephants exhibited nocturnal lying rest behavior varied among the elephants, with the oldest elephant exhibiting the least amount (an average of 13.2 ± 2.8% of the nightly behavioral scans) compared to the two younger elephants (an average of 34.5 ± 2.1% and 56.6 ± 2.8% of the nightly behavioral scans). There was a significant increase in lying rest behavior for one elephant and standing rest for a second elephant following renovations. Baseline cortisol concentrations prior to renovations were 3.0 ± 0.4 ng/ml, 4.5 ± 0.5 ng/ml, and 4.9 ± 0.5 ng/ml for the three elephants. Cortisol

  8. Assessment of Flooring Renovations on African Elephant (Loxodonta africana Behavior and Glucocorticoid Response.

    Directory of Open Access Journals (Sweden)

    Sarah A Boyle

    Full Text Available Captive African (Loxodonta africana and Asian (Elephas maximus elephants can experience foot pathologies and arthritis. As a preventative measure against these pathologies and to alleviate the potential discomfort due to concrete substrates, some zoological institutions have renovated elephant housing to increase the amount of natural or shock-absorbent substrates. The objective of this study was to compare behavioral (diurnal and nocturnal and glucorticoid (e.g., serum cortisol responses of three female African elephants before, during, and after renovation to their indoor housing floor to assess whether renovations had short-term effects on the elephants' behavior and stress physiology. Behavioral data were collected using scan-sampling methods, and activity budgets were constructed for each of the three elephants. In addition, the duration of all lying rest activities were recorded. Weekly serum cortisol concentrations were determined with enzyme immunoassay (EIA. Overall, eating was the most prevalent behavior exhibited outdoors during the day, while resting (either in a lying or standing position were most common during the indoor, nocturnal periods. Although variation existed among the three elephants, all three females spent significantly more time walking and less time eating during the day after the completion of the renovations. The extent to which the three elephants exhibited nocturnal lying rest behavior varied among the elephants, with the oldest elephant exhibiting the least amount (an average of 13.2 ± 2.8% of the nightly behavioral scans compared to the two younger elephants (an average of 34.5 ± 2.1% and 56.6 ± 2.8% of the nightly behavioral scans. There was a significant increase in lying rest behavior for one elephant and standing rest for a second elephant following renovations. Baseline cortisol concentrations prior to renovations were 3.0 ± 0.4 ng/ml, 4.5 ± 0.5 ng/ml, and 4.9 ± 0.5 ng/ml for the three elephants

  9. Analysis of energy economic renovation for historic wooden apartment buildings in cold climates

    International Nuclear Information System (INIS)

    Arumägi, Endrik; Kalamees, Targo

    2014-01-01

    Highlights: • Energy saving potential in historic wooden apartment buildings is up to 63%. • In historic wooden apartment buildings an economically viable energy saving level is 50%. • The largest energy saving potential lies in heat source and building service systems. • Of the building structures, insulation of the external wall has the highest potential. • New heating and ventilation systems must be installed to fulfill regulations limits. - Abstract: Buildings represent the largest sector of primary energy consumption and play a major role in saving energy and reducing greenhouse gas emissions. Our analysis of energy consumption and potential energy savings is based on field measurements, computer simulations and economic calculations. The average primary energy consumption (PE) of wooden apartment buildings was 331 kW h/(m 2 a) 83% higher than the limit 180 kW h/(m 2 a) set in national regulations for apartment buildings subject to major renovation. The studied buildings represent a high potential for energy savings. The renovation packages were compiled using different insulation measures, HVAC solutions and energy sources to achieve a 20–65% reduction of primary energy. For historic buildings, the renovation solutions that concentrate on the building envelope can be problematic due to the need to preserve cultural and architectural values. Our calculation results indicate that the cost optimal PE level is around 250 kW h/(m 2 a) and the point at which renovation packages recover expenses is around a PE level of 170 kW h/(m 2 a). In terms of the architectural appearance the point at which renovation packages recover expenses is around a PE level of 210 kW h/(m 2 a). We propose to set a different PE limit for historic wooden apartment buildings with an architectural appearance worth preserving

  10. Command and Control of Private Security Contractors: Are They a Viable Force Option for the Combatant Commander?

    National Research Council Canada - National Science Library

    Sherard, Scott H

    2008-01-01

    If a Combatant Commander (CCDR) or Joint Force Commander (JFC) were to take command of the approximately 25,000 security contractors in Iraq, a force of such size and capability would prove to be a valuable operational asset...

  11. Toward Unity of Command for Multinational Air Forces

    National Research Council Canada - National Science Library

    Asjes, David

    1998-01-01

    To assure unity of command in future multinational air operations, combatant commanders must embrace the necessity of multinational air forces, maximize the integration of allied officers within air...

  12. Potential energy savings in renovation projects of residential and service buildings; Energiansaeaestoemahdollisuudet rakennuskannan korjaustoiminnassa

    Energy Technology Data Exchange (ETDEWEB)

    Heljo, J.; Vihola, J.

    2012-11-01

    The study estimates the feasible energy savings potential in the 2010 building stock by 2050. The focus is on energy-saving measures related to renovation of residential and service buildings. The calculations were done by building types and age groups using the EKOREM calculation model. The calculations indicate the building types and structural elements where potential for savings exists. The study did not consider energy-saving measures related to changes in heating systems, electrical equipment, property maintenance or use habits. The study disproved the common belief that considerably more energy savings could be achieved faster by focussing on the existing building stock instead of new construction. That is mainly due the fact that it generally pays to implement structural energy-saving measures only when the targeted elements also require other significant repairs besides energy-efficiency improvements. Thus, energy renovations cannot be speeded up very much. The clearest exception are the extra insulations added to roof assemblies that are easy to implement. Attempts to save more energy in the building stock than can be achieved at a small additional cost in connection with needed renovations may multiply costs, and the saving in energy costs will not necessarily cover the additional investments. The efficiency of energy-saving measures can be affected by recommending or ordering use of more energy efficient windows, thicker extra insulations or more efficient ventilation heat recovery systems than the standard solution selected in connection with renovations. The goal of preserving the characteristics of buildings of cultural-historical or architectural value and the typical solutions and materials used in all buildings of a certain period limit the repair and renovation of structural elements. In the case of these buildings, improvement of energy efficiency can be considered in connection with the planning of renovations and the buildings' use and

  13. New Global Missions for Strategic Command

    National Research Council Canada - National Science Library

    Graham, David

    2002-01-01

    .... The focus of this White Paper is on the external decisions that will be needed to provide the Command with a clear mission, and the authority, resources and organizational support necessary to perform the mission...

  14. U.S. Pacific Command > Leadership

    Science.gov (United States)

    USPACOM U.S. Pacific Command Search USPACOM: Search Search Search USPACOM: Search Home Leadership Directory Media Inquiries Home : Leadership Admiral Harry B. Harris, Jr., U.S. Navy Read the full biography

  15. The Road to a New Unified Command

    Science.gov (United States)

    2008-01-01

    The Directorate of Command, Control, Communications, and Computers (C4) Systems is chartered with information architecture (including in Africa...Friday afternoon cinema presentations where a documentary or feature film covering an African historic event was played, followed by dialogue

  16. Unit Testing for Command and Control Systems

    Science.gov (United States)

    Alexander, Joshua

    2018-01-01

    Unit tests were created to evaluate the functionality of a Data Generation and Publication tool for a command and control system. These unit tests are developed to constantly evaluate the tool and ensure it functions properly as the command and control system grows in size and scope. Unit tests are a crucial part of testing any software project and are especially instrumental in the development of a command and control system. They save resources, time and costs associated with testing, and catch issues before they become increasingly difficult and costly. The unit tests produced for the Data Generation and Publication tool to be used in a command and control system assure the users and stakeholders of its functionality and offer assurances which are vital in the launching of spacecraft safely.

  17. Basic interrupt and command structures and applications

    International Nuclear Information System (INIS)

    Davies, R.C.

    1974-01-01

    Interrupt and command structures of a real-time system are described through specific examples. References to applications of a real-time system and programing development references are supplied. (auth)

  18. An Operational Commander's Guide to the Media

    National Research Council Canada - National Science Library

    McCartney, Michael

    2005-01-01

    ... of the embedded reporter . The Operational Commander is wise to review media relations and the successes and pitfalls of past conflicts, and to examine closely the results of Operation Iraqi Freedom so as to...

  19. Focused Logistics: Time for Functional Command

    National Research Council Canada - National Science Library

    Mintzlaff, Jeffrey G

    2005-01-01

    .... Military's distribution system -- the parts of the Department of Defense (DoD) that manage and execute the storage and movement of supplies to military customers -- consists of multiple entities and agencies made up of separate Services and commands...

  20. Schema for Spacecraft-Command Dictionary

    Science.gov (United States)

    Laubach, Sharon; Garcia, Celina; Maxwell, Scott; Wright, Jesse

    2008-01-01

    An Extensible Markup Language (XML) schema was developed as a means of defining and describing a structure for capturing spacecraft command- definition and tracking information in a single location in a form readable by both engineers and software used to generate software for flight and ground systems. A structure defined within this schema is then used as the basis for creating an XML file that contains command definitions.

  1. Distributed computing environment for Mine Warfare Command

    OpenAIRE

    Pritchard, Lane L.

    1993-01-01

    Approved for public release; distribution is unlimited. The Mine Warfare Command in Charleston, South Carolina has been converting its information systems architecture from a centralized mainframe based system to a decentralized network of personal computers over the past several years. This thesis analyzes the progress Of the evolution as of May of 1992. The building blocks of a distributed architecture are discussed in relation to the choices the Mine Warfare Command has made to date. Ar...

  2. Control of automated system with voice commands

    OpenAIRE

    Švara, Denis

    2012-01-01

    In smart houses contemporary achievements in the fields of automation, communications, security and artificial intelligence, increase comfort and improve the quality of user's lifes. For the purpose of this thesis we developed a system for managing a smart house with voice commands via smart phone. We focused at voice commands most. We want move from communication with fingers - touches, to a more natural, human relationship - speech. We developed the entire chain of communication, by which t...

  3. Defense or Diplomacy Geographic Combatant Commands

    Science.gov (United States)

    2011-06-01

    originally ruled by 1 Priest, Dana , The Mission: Waging War and Keeping Peace with America’s Military...events. US Central Command. Dana Priest describes General Zinni‟s experience as a GCC commander, wherein General Zinni found that in many ways...ignored altogether. Dr. James Forsyth and Lt Col Chance Saltzman make this argument in their Air and Space Power Journal article “Stay Out —Why

  4. An Advanced Commanding and Telemetry System

    Science.gov (United States)

    Hill, Maxwell G. G.

    The Loral Instrumentation System 500 configured as an Advanced Commanding and Telemetry System (ACTS) supports the acquisition of multiple telemetry downlink streams, and simultaneously supports multiple uplink command streams for today's satellite vehicles. By using industry and federal standards, the system is able to support, without relying on a host computer, a true distributed dataflow architecture that is complemented by state-of-the-art RISC-based workstations and file servers.

  5. Method for a component-based economic optimisation in design of whole building renovation versus demolishing and rebuilding

    DEFF Research Database (Denmark)

    Morelli, Martin; Harrestrup, Maria; Svendsen, Svend

    2014-01-01

    investing in retrofit measures and buying renewable energy. The overall cost of the renovation considers the market value of the property, the investment in the renovation, the operational and maintenance costs. A multi-family building is used as an example to clearly illustrate the application...... of the method from macroeconomic and private financial perspectives. Conclusion: The example shows that the investment cost and future market value of the building are the dominant factors in deciding whether to renovate an existing building or to demolish it and thereafter erect a new building. Additionally...

  6. An assessment of schoolyard renovation strategies to encourage children's physical activity

    Directory of Open Access Journals (Sweden)

    Greenwood Emily

    2011-04-01

    Full Text Available Abstract Background Children in poor and minority neighborhoods often lack adequate environmental support for healthy physical development and community interventions designed to improve physical activity resources serve as an important approach to addressing obesity. In Denver, the Learning Landscapes (LL program has constructed over 98 culturally-tailored schoolyard play spaces at elementary schools with the goal to encourage utilization of play spaces and physical activity. In spite of enthusiasm about such projects to improve urban environments, little work has evaluated their impact or success in achieving their stated objectives. This study evaluates the impacts of LL construction and recency of renovation on schoolyard utilization and the physical activity rates of children, both during and outside of school, using an observational study design. Methods This study employs a quantitative method for evaluating levels of physical activity of individuals and associated environmental characteristics in play and leisure environments. Schools were selected on the basis of their participation in the LL program, the recency of schoolyard renovation, the size of the school, and the social and demographic characteristics of the school population. Activity in the schoolyards was measured using the System for Observing Play and Leisure Activity (SOPLAY, a validated quantitative method for evaluating levels of physical activity of individuals in play and leisure environments. Trained observers collected measurements before school, during school recess, after school, and on weekends. Overall utilization (the total number of children observed on the grounds and the rate of activity (the percentage of children observed who were physically active were analyzed. Observations were compared using t-tests and the data were stratified by gender for further analysis. In order to assess the impacts of LL renovation, recently-constructed LL schoolyards were

  7. Test Telemetry And Command System (TTACS)

    Science.gov (United States)

    Fogel, Alvin J.

    1994-01-01

    The Jet Propulsion Laboratory has developed a multimission Test Telemetry and Command System (TTACS) which provides a multimission telemetry and command data system in a spacecraft test environment. TTACS reuses, in the spacecraft test environment, components of the same data system used for flight operations; no new software is developed for the spacecraft test environment. Additionally, the TTACS is transportable to any spacecraft test site, including the launch site. The TTACS is currently operational in the Galileo spacecraft testbed; it is also being provided to support the Cassini and Mars Surveyor Program projects. Minimal personnel data system training is required in the transition from pre-launch spacecraft test to post-launch flight operations since test personnel are already familiar with the data system's operation. Additionally, data system components, e.g. data display, can be reused to support spacecraft software development; and the same data system components will again be reused during the spacecraft integration and system test phases. TTACS usage also results in early availability of spacecraft data to data system development and, as a result, early data system development feedback to spacecraft system developers. The TTACS consists of a multimission spacecraft support equipment interface and components of the multimission telemetry and command software adapted for a specific project. The TTACS interfaces to the spacecraft, e.g., Command Data System (CDS), support equipment. The TTACS telemetry interface to the CDS support equipment performs serial (RS-422)-to-ethernet conversion at rates between 1 bps and 1 mbps, telemetry data blocking and header generation, guaranteed data transmission to the telemetry data system, and graphical downlink routing summary and control. The TTACS command interface to the CDS support equipment is nominally a command file transferred in non-real-time via ethernet. The CDS support equipment is responsible for

  8. 32 CFR 700.1054 - Command of a naval base.

    Science.gov (United States)

    2010-07-01

    ... 32 National Defense 5 2010-07-01 2010-07-01 false Command of a naval base. 700.1054 Section 700.1054 National Defense Department of Defense (Continued) DEPARTMENT OF THE NAVY UNITED STATES NAVY... Command Detail to Duty § 700.1054 Command of a naval base. The officer detailed to command a naval base...

  9. The Battle Command Sustainment Support System: Initial Analysis Report

    Science.gov (United States)

    2016-09-01

    products including jet fuels, distillate fuels, residual fuels, automotive gasoline , specified bulk lubricating oils, aircraft engine oils, fuel...contained within this report. 15. SUBJECT TERMS Mission command Software Tactical applications (TacApps) Command post ...computing environment (CPCE) Command post client Battle command sustainment support System (BCS3) Logistics

  10. Methodical bases of selection and evaluation of the effectiveness of the projects of the urban territory renovation

    Science.gov (United States)

    Sizova, Evgeniya; Zhutaeva, Evgeniya; Chugunov, Andrei

    2018-03-01

    The article highlights features of processes of urban territory renovation from the perspective of a commercial entity participating in the implementation of a project. The requirements of high-rise construction projects to the entities, that carry out them, are considered. The advantages of large enterprises as participants in renovation projects are systematized, contributing to their most efficient implementation. The factors, which influence the success of the renovation projects, are presented. A method for selecting projects for implementation based on criteria grouped by qualitative characteristics and contributing to the most complete and comprehensive evaluation of the project is suggested. Patterns to prioritize and harmonize renovation projects in terms of multi-project activity of the enterprise are considered.

  11. Delimitation and Classified Planning Management of Functional Renovation Zone: Experience of and Discussion on Shenzhen's Practice of Urban Renewal

    Institute of Scientific and Technical Information of China (English)

    Hao Wenxuan; Tong De; Liu Qing; Feng Changchun; Liu Jinxin

    2016-01-01

    Urban renewal is one of the important issues of urban development in China.Along with its development in the contemporary time,China has seen considerable achievements and problems as well in urban renewal.Taking into account that Shenzhen has carried out plenty of explorations on urban planning renewal,this paper takes it as an example to firstly analyze the plights of its urban renewal planning,the shortcomings of its urban renewal projects,and the advantages of functional renovation zones to manifest the necessity of the delimitation and classified planning management of functional renovation zone in urban renewal.It then summarizes the experience of its urban renewal unit planning in terms of the methods of zoning and implementation,and finally discusses the conceptual connotations of functional renovation zone,as well as the logic and characteristics of renovations of its delimitation and classified planning management,in hope of providing other Chinese cities with some references.

  12. Mobilization for energy renovation. Preliminary results of a survey on rational and heuristic thinking of the dwellers.

    OpenAIRE

    Taranu, Victoria; Verbeeck, Griet

    2016-01-01

    Mobilization for energy renovation. The commonly used policies to encourage the uptake of energy efficient measures in renovations are mostly based on monetary incentives and information provision. Both these approaches have the underlying assumption that dwellers act exclusively as rational homo economicus, who has unlimited intellectual capabilities to calculate long term ROI. However, recent findings show evidence that people have bounded rationality and bounded willpower. A survey was...

  13. Interior renovation of a general practitioner office leads to a perceptual bias on patient experience for over one year.

    Science.gov (United States)

    Gauthey, Jérôme; Tièche, Raphaël; Streit, Sven

    2018-01-01

    Measuring patient experience is key when assessing quality of care but can be biased: A perceptual bias occurs when renovations of the interior design of a general practitioner (GP) office improves how patients assessed quality of care. The aim was to assess the length of perceptual bias and if it could be reproduced after a second renovation. A GP office with 2 GPs in Switzerland was renovated twice within 3 years. We assessed patient experience at baseline, 2 months and 14 months after the first and 3 months after the second renovation. Each time, we invited a sample of 180 consecutive patients that anonymously graded patient experience in 4 domains: appearance of the office; qualities of medical assistants and GPs; and general satisfaction. We compared crude mean scores per domain from baseline until follow-up. In a multivariate model, we adjusted for patient's age, gender and for how long patients had been their GP. At baseline, patients aged 60.9 (17.7) years, 52% females. After the first renovation, we found a regression to the baseline level of patient experience after 14 months except for appearance of the office (pInterior renovation of a GP office probably causes a perceptual bias for >1 year that improves how patients rate quality of care. This bias could be reproduced after a second renovation strengthening a possible causal relationship. These findings imply to appropriately time measurement of patient experience to at least one year after interior renovation of GP practices to avoid environmental changes influences the estimates when measuring patient experience.

  14. Method for a component-based economic optimisation in design of whole building renovation versus demolishing and rebuilding

    International Nuclear Information System (INIS)

    Morelli, Martin; Harrestrup, Maria; Svendsen, Svend

    2014-01-01

    Aim: This paper presents a two-fold evaluation method determining whether to renovate an existing building or to demolish it and thereafter erect a new building. Scope: The method determines a combination of energy saving measures that have been optimised in regards to the future cost for energy. Subsequently, the method evaluates the cost of undertaking the retrofit measures as compared to the cost of demolishing the existing building and thereafter erecting a new one. Several economically beneficial combinations of energy saving measures can be determined. All of them are a trade-off between investing in retrofit measures and buying renewable energy. The overall cost of the renovation considers the market value of the property, the investment in the renovation, the operational and maintenance costs. A multi-family building is used as an example to clearly illustrate the application of the method from macroeconomic and private financial perspectives. Conclusion: The example shows that the investment cost and future market value of the building are the dominant factors in deciding whether to renovate an existing building or to demolish it and thereafter erect a new building. Additionally, it is concluded in the example that multi-family buildings erected in the period 1850–1930 should be renovated. - highlights: • Development of a method for evaluation of renovation projects. • Determination of an economic optimal combination of various energy saving measures. • The method compared the renovation cost to those for demolishing and building new. • Decision was highly influence by the investment cost and buildings market value. • The results indicate that buildings should be renovated and not demolished

  15. STS-37 Commander Nagel in commanders seat on OV-104's flight deck

    Science.gov (United States)

    1991-01-01

    STS-37 Commander Steven R. Nagel, wearing launch and entry suit (LES), sits at commanders station on the forward flight deck of Atlantis, Orbiter Vehicle (OV) 104. Surrounding Nagel are the seat headrest, control panels, checklists, forward flight deck windows, and three drinking water containers with straws attached to forward panel F2.

  16. CONVERGENCE AS A RENOVATION/CONSERVATION TOOL FOR JOURNALISM IN GALICIA: STRATEGIES AND UNCERTAINTIES

    Directory of Open Access Journals (Sweden)

    Carlos Toural Bran

    2012-06-01

    Full Text Available This paper offers a theoretical reflection on the concept of convergence in the Autonomous Community of Galicia, in Spain. In this geographic area, marked by its respect for journalistic tradition (especially referring to the press and its inertia, it is possible to distinguish two different attitudes (actually conflicting with regard to the convergence phenomenon. Conservation strategies coexist, therefore, (focusing mainly on the business aspect of the convergent phenomenon with renovation strategies (creation of new spaces on the web, great commitment to the possibilities offered by new technologies and social networks. We are presenting an analytical study of the coexistence of these two interpretations of convergence (marketing and technological, respectively in the communication ecosystem of Galicia. We can recognize the beginning of a dialectic tension between the discourses of renovation and conservation which at present coexist in harmony. It is assumed that the information industry in Galicia will eventually choose the path that guarantees the survival of its media.

  17. Convergence as a renovation/conservation tool for journalism in Galicia: strategies and uncertainties

    Directory of Open Access Journals (Sweden)

    Xosé López García

    2012-06-01

    Full Text Available This paper offers a theoretical reflection on the concept of convergence in the Autonomous Community of Galicia, in Spain. In this geographic area, marked by its respect for journalistic tradition (especially referring to the press and its inertia, it is possible to distinguish two different attitudes (actually conflicting with regard to the convergence phenomenon. Conservation strategies coexist, therefore, (focusing mainly on the business aspect of the convergent phenomenon with renovation strategies (creation of new spaces on the web, great commitment to the possibilities offered by new technologies and social networks. We are presenting an analytical study of the coexistence of these two interpretations of convergence (marketing and technological, respectively in the communication ecosystem of Galicia. We can recognize the beginning of a dialectic tension between the discourses of renovation and conservation which at present coexist in harmony. It is assumed that the information industry in Galicia will eventually choose the path that guarantees the survival of its media.

  18. Energy renovation of Danish single-family houses Economy - barrier, motivation and limit

    DEFF Research Database (Denmark)

    Mortensen, Andrea; Heiselberg, Per Kvols; Plenge, Mary-Ann Knudstrup

    a large percentage who have not heard about the offers compared to the other income groups. There have been many reflections about energy saving initiatives and many of the initiatives have already been performed. There is however still a high number missing and particularly the depth of the renovation...... needs to be increased for Denmark to approach the defined objectives. The positive is that the listed tasks are predominantly carried out or considered to save energy, indicating that the homeowners are aware of this benefit. On the wish list presented to the homeowners, five wishes were selected.......000 DKK and 310.000DKK) are fair compared to the outcome, but when the needed investment is at 550.000 DKK and above, the majority think it is too expensive despite the benefits. The investment limit for the private renovations is defined on the basis on the homeowners’ interest in performing similar...

  19. Build, renovate and invest economically - Efficiency and economic viability in harmony

    International Nuclear Information System (INIS)

    Meier, R.; Beck, M.; Previdoli, P.

    2002-01-01

    This book presents 13 papers that provide the latest know-how on energy economics in the building area. The authors show the importance of information and knowledge transfer when using new energy technologies. The topics covered include the role of the Swiss research programme on energy economy fundamentals, indicator systems for sustainability factors and energy characteristics of buildings. Also a discussion of the question 'rebuild or renovate', as well a series of articles about low-flow mechanical ventilation and the marketing of low-energy consumption building concepts are presented. Further articles cover the marketing of thermal solar systems as well as technology dissemination and monitoring. Also, the marginal costs of energy efficiency measures and the potential for energy savings and environmental management in trade and industry are discussed. Finally, two papers deal with the application of Swiss SIA building standards as well as technical developments and energy efficiency in the building and renovation areas

  20. Gaps in tools assessing the energy implications of renovation versus rebuilding decisions

    DEFF Research Database (Denmark)

    Goldstein, Benjamin Paul; Herbøl, Mads; Meza, Maria Josefina Figueroa

    2013-01-01

    to evaluate project level energy-related decisions than at larger scales. Information gaps identified within assessment tools lead to uncertainty for decision makers about which option improves energy efficiency. In the case of a number of large-scale EU building renovating/renewing projects these tools have......The state of building stocks changes over time. Owners and municipalities face the choice to renovate or rebuild buildings to improve energy efficiency. This review addresses how current sustainability assessment tools support these decisions. It finds that advanced tools are better tailored...... been scarcely used or merely suggested during planning. Recent advances in sustainability assessment tools can begin to close some of the existing knowledge gaps, while incentives and stricter legislation may improve their usage rates....

  1. SOA approach to battle command: simulation interoperability

    Science.gov (United States)

    Mayott, Gregory; Self, Mid; Miller, Gordon J.; McDonnell, Joseph S.

    2010-04-01

    NVESD is developing a Sensor Data and Management Services (SDMS) Service Oriented Architecture (SOA) that provides an innovative approach to achieve seamless application functionality across simulation and battle command systems. In 2010, CERDEC will conduct a SDMS Battle Command demonstration that will highlight the SDMS SOA capability to couple simulation applications to existing Battle Command systems. The demonstration will leverage RDECOM MATREX simulation tools and TRADOC Maneuver Support Battle Laboratory Virtual Base Defense Operations Center facilities. The battle command systems are those specific to the operation of a base defense operations center in support of force protection missions. The SDMS SOA consists of four components that will be discussed. An Asset Management Service (AMS) will automatically discover the existence, state, and interface definition required to interact with a named asset (sensor or a sensor platform, a process such as level-1 fusion, or an interface to a sensor or other network endpoint). A Streaming Video Service (SVS) will automatically discover the existence, state, and interfaces required to interact with a named video stream, and abstract the consumers of the video stream from the originating device. A Task Manager Service (TMS) will be used to automatically discover the existence of a named mission task, and will interpret, translate and transmit a mission command for the blue force unit(s) described in a mission order. JC3IEDM data objects, and software development kit (SDK), will be utilized as the basic data object definition for implemented web services.

  2. Childcare outdoor renovation as a built environment health promotion strategy: evaluating the preventing obesity by design intervention.

    Science.gov (United States)

    Cosco, Nilda G; Moore, Robin C; Smith, William R

    2014-01-01

    To evaluate the effectiveness of Preventing Obesity by Design (POD), a childcare center outdoor renovation intervention. Pre-post intervention evaluation. North Carolina licensed childcare centers (N = 27). Preschool children. Outdoor renovation, teacher training. Behavior mapping, Preschool Outdoor Environment Measurement Scale (POEMS), center director interview. Descriptive statistics, ordinary least squares and logistic regressions calculated to assess levels of association between environmental change, children's physical activity (PA), social behaviors, and environmental quality. Qualitative interview data analyzed to help understand intervention impact. Behavior mapping showed that site layout attributes, such as the form (i.e., "single loop" and "double loop") of pathways (functioning as circulation routes and wheeled toy settings), are associated with higher levels of PA. Teacher interaction was associated with decreased children's PA. Absence of teacher or lack of child/child interaction was associated with increased PA. POEMS assessment of environmental quality was higher after renovation. POEMS domains (Physical Space and Teacher/Caregiver Roles) were positively associated with PA. After renovation, 68% of center directors reported positive changes in children's behavior and 40% mentioned edible plant installations as greatest success. Built environment renovation of childcare center outdoors, including looped pathways installation, coupled with teacher training, may support increased PA. Renovation, including food gardens, may be a key to success for preschool health promotion and support change in childcare policy.

  3. Techno-economic analysis of energy renovation measures for a district heated multi-family house

    International Nuclear Information System (INIS)

    Gustafsson, Marcus; Gustafsson, Moa Swing; Myhren, Jonn Are; Bales, Chris; Holmberg, Sture

    2016-01-01

    Highlights: • Energy saving measures can be cost-effective as part of a planned renovation. • Primary energy consumption, non-renewable energy consumption and CO_2 emissions are assessed for different electricity mixes. • EAHP can be a cost-effective and environmentally beneficial complement to district heating. • EAHP has lower LCC and significantly shorter payback time than ventilation with heat recovery. • Low-temperature ventilation radiators improve the COP of the heat pump. - Abstract: Renovation of existing buildings is important in the work toward increased energy efficiency and reduced environmental impact. The present paper treats energy renovation measures for a Swedish district heated multi-family house, evaluated through dynamic simulation. Insulation of roof and façade, better insulating windows and flow-reducing water taps, in combination with different HVAC systems for recovery of heat from exhaust air, were assessed in terms of life cycle cost, discounted payback period, primary energy consumption, CO_2 emissions and non-renewable energy consumption. The HVAC systems were based on the existing district heating substation and included mechanical ventilation with heat recovery and different configurations of exhaust air heat pump. Compared to a renovation without energy saving measures, the combination of new windows, insulation, flow-reducing taps and an exhaust air a heat pump gave up to 24% lower life cycle cost. Adding insulation on roof and façade, the primary energy consumption was reduced by up to 58%, CO_2 emissions up to 65% and non-renewable energy consumption up to 56%. Ventilation with heat recovery also reduced the environmental impact but was not economically profitable in the studied cases. With a margin perspective on electricity consumption, the environmental impact of installing heat pumps or air heat recovery in district heated houses is increased. Low-temperature heating improved the seasonal performance factor of the

  4. Success for energy efficient renovation of dwellings—Learning from private homeowners

    International Nuclear Information System (INIS)

    Risholt, Birgit; Berker, Thomas

    2013-01-01

    Large scale energy efficient renovation of buildings is one of the most important tools to realize the society's need of a more sustainable building stock. Most Norwegians own their own homes. Therefore private homeowners are a focus group for the government urging to accelerate the dwelling energy efficiency rates. Success factors were identified in the in-depth study of the decision process of eleven homeowners. Large differences in energy use due to the building's condition and the occupants' behavior was encountered in the sample. Only homeowners who were conscious consumers and did not trust expert advice or that had special knowledge due to their professions succeeded in realizing energy efficiency by renovation. Lack of knowledge, bad advice from craftsmen or priority to work that they can do themselves stopped other homeowners from implementing energy efficiency. Increased knowledge on all the gains from energy efficiency, the availability of attractive products and services as well as easy access to reliable advice on the better renovation solutions have a large potential to get more homeowners to make energy efficient choices in the process of renovation. Coordination of more of policy strategies including specific information and incentives are needed to facilitate this. - Highlights: • Private homeowners are a key group to increase the dwelling energy efficiency rates. • The annual energy use varies from 103 kW h/m 2 to 240 kW h/m 2 in similar dwellings. • Homeowners that are conscious consumers or have knowledge succeed in saving energy. • Access to relevant and reliable advice can get homeowners to realize energy savings. • Craftsmen could be mediators between available products and the specific building

  5. The socioeconomic impact of energy saving renovation measures in urban buildings

    OpenAIRE

    Mikulić, Davor; Rašić Bakarić, Ivana; Slijepčević, Sunčana

    2016-01-01

    The purpose of the paper is to investigate the role of measures oriented to energy savings in residential buildings in the economic development at the regional level. The aim of the paper is to estimate overall socio-economic impact of energy saving renovation measures in the Croatian urban areas. Impact assessment is based on input–output methodology which is able to quantify direct and indirect effects of investment in the energy saving projects on the economic activity and employment...

  6. Final Environmental Assessment to Renovate Fourth Cliff Recreational Area at Hanscom Air Force Base, Massachusetts

    Science.gov (United States)

    2014-11-17

    Renovate Fourth Cliff Recreational Annex Grading and topography changes may be necessary to design an appropriate drainage system at the site...goals: 1) Increase safety for personnel and patrons at the site; 2) Provide protection of the exposed cliff face from rainwater runoff; 3) Provide...be followed. Drainage design must meet Massachusetts Stormwater Management Standards, as well as comply with the Federal Clean Water Act. Solid

  7. A Pc-interface module has been developed that provides an easy way to interface PC

    International Nuclear Information System (INIS)

    Rifai, Ahmad; Gunawan, Usep Setia

    2003-01-01

    A pc-interface module has been developed that provides an easy way to interface PC with I/O devices. This MSC51 micro controller based module accepts series of commands from a personal computer through a serial port. The commands are defined to easily control 24 I/O lines available on the module. These lines can be individually used as either input or output that make the module very verstile. A command is received by the module on ASCII string basis. Each character sent to the module will give an interrupt. The firmware's interrupt handler will store the character in a buffer until end of command character arrives. The firmware then parses and interpreters the command and responses accordingly

  8. Multi-angled Façade System for Office Building Renovation

    DEFF Research Database (Denmark)

    Hannoudi, Loay Akram; Christensen, Jørgen Erik; Lauring, Michael

    renovating office buildings. The architectural potential is presented with the help of AutoCAD software. The energy efficiency and indoor climate are investigated and evaluated by using correlational research and simulation research methods with the software IDA ICE. From a functional perspective, the multi......-angled façade increases the area of the office room and provides more space. There are many potential aesthetic benefits provided by multi-angled façades such as improved optical and visual quality from inside the office room and the possibility for daylight penetration and a view to outside from one part...... compared to a renovated flat façade varies between 4.9 and 6.5 kWh/(m2.year), depending on the orientation of the façade. The increase in the office room area, when renovated with a multi-angled façade, is by 19%, while the increase of the yearly primary energy consumption (not area weighted), is by 4...

  9. Aprovechamiento de recursos renovables en la obtención de nuevos materiales

    Directory of Open Access Journals (Sweden)

    Sandra Liliana Gómez Ayala

    2018-02-01

    Full Text Available La producción de plásticos a nivel mundial presenta cifras abrumadoras debido a que tienen aplicaciones en diferentes campos, desde la medicina hasta la industria de empaques. Uno de los problemas radica en que la materia prima para preparar esos plásticos proviene de fuentes fósiles, los principales responsables de las emisiones de dióxido de carbono a la atmósfera y después de usar esos materiales se desechan y tardan varios años en descomponerse. Otro problema está enfocado hacia la agricultura e incluye los procesos que generan desechos orgánicos como la industria azucarera y del café, que pueden contaminar el medio ambiente sin tratamiento adecuado. Cada vez cobra más importancia reemplazar los plásticos convencionales por biomateriales cuyos sustratos de partida provengan de fuentes renovables, que sean biodegradables y que puedan tener aplicaciones similares a los materiales convencionales. Por ello, en este artículo se destacan los últimos avances en el área de los materiales a partir de recursos renovables, en especial de los polímeros biobasados, de su biodegradabilidad y sus aplicaciones, para generar curiosidad y propiciar la búsqueda de alternativas de aprovechamiento de las fuentes renovables en la obtención de nuevos biopolímeros.

  10. New potentional of high-speed water jet technology for renovating concrete structures

    Science.gov (United States)

    Bodnárová, L.; Sitek, L.; Hela, R.; Foldyna, J.

    2011-06-01

    The paper discusses the background and results of research focused on the action of a high-speed water jet on concrete with different qualities. The sufficient and careful removal of degraded concrete layers is very important for the renovation of concrete structures. High-speed water jet technology is one of the most common methods used for removing degraded concrete layers. Different types of high-speed water jets were tested in the experimental part. The classical technology of a single continuous water jet generated with one nozzle was tested as well as the technology of revolving water jets generated by multiple nozzles (used mainly for the renovation of larger areas). A continuous flat water jet and pulsating flat water jet were tested the first time, because the connection of a water jet with the acoustic generator of a pulsating jet offers new possibilities for the use of a water jet (see [1] and [2]). A water jet with such a modification is capable of efficient action and can even be used for cutting solid concrete with a relatively low consumption of energy. A flat pulsating water jet which can be newly used for renovation seems to be a promising technology.

  11. Perspectives on Near ZEB Renovation Projects for Residential Buildings: The Spanish Case

    Directory of Open Access Journals (Sweden)

    Faustino Patiño-Cambeiro

    2016-08-01

    Full Text Available EU regulations are gradually moving towards policies that reduce energy consumption and its environmental impact. To reach this goal, improving energy efficiency in residential buildings is a key action line. The European Parliament adopted the Near Zero-Energy Building (nZEB as the energy efficiency paradigm through Directive 2010/31/EU, but a common technical and legislative framework for energy renovations is yet to be established. In this paper, the nZEB definition by COHERENO was adopted to evaluate several energy renovation packages in a given building, which is also representative of the Spanish building stock. Global costs are calculated for all of them following EPBD prescriptions. Two economic scenarios are analysed: with entirely private funding and with the current public financial incentives, respectively. The results show the divergence between optimum solutions in terms of costs and of minimum CO2 footprint and maximum energy saving. Moreover, in the absence of enough incentives, some inefficient renovations could achieve a global cost close to the optimal cost. The optimum solution both in terms of energy performance and global costs was carried out and described.

  12. A District Approach to Building Renovation for the Integral Energy Redevelopment of Existing Residential Areas

    Directory of Open Access Journals (Sweden)

    Mira Conci

    2017-05-01

    Full Text Available Building energy renovation quotas are not currently being met due to unfavorable conditions such as complex building regulations, limited investment incentives, historical preservation priorities, and technical limitations. The traditional strategy has been to incrementally lower the energy consumption of the building stock, instead of raising the efficiency of the energy supply through a broader use of renewable sources. This strategy requires an integral redefinition of the approach to energy building renovations. The joint project SWIVT elaborates on a district redevelopment strategy that combines a reduction in the energy demand of existing buildings and their physical interconnection within a local micro-grid and heating network. The district is equipped with energy generation and distribution technologies as well as hybrid thermal and electrical energy storage systems, steered by an optimizing energy management controller. This strategy is explored through three scenarios designed for an existing residential area in Darmstadt, Germany, and benchmarked against measured data. Presented findings show that a total primary energy balance at least 30% lower than that of a standard building renovation can be achieved by a cluster of buildings with different thermal qualities and connected energy generation, conversion, and storage systems, with only minimal physical intervention to existing buildings.

  13. Economic efficiency of high-rise construction in the Moscow program of renovation of housing stock

    Science.gov (United States)

    Misailovov, Andrey

    2018-03-01

    The article considers a new initiative of the regional authorities of updating the housing stock designated as the renovation of housing. Its main aspects are analyzed, including the nature of program, economic efficiency of its implementation due to high-rise construction and the regulatory and legislative framework, the procedure for implementing the program, and the time frame for its implementation. The role of the program for regions in which high depreciation of the housing stock is combined with a limited number of sites for a new housing construction is disclosed. The high-rise construction in the renovation program is presented as a variant of a successful solution not only of the tasks of renovating the housing stock, but also of filling the regional budget. The social and economic orientation of the high-rise construction and the involvement of residents in the process of making town-planning decisions in the field of high-rise construction at all stages of implementing the program are shown.

  14. A two-factor method for appraising building renovation and energy efficiency improvement projects

    International Nuclear Information System (INIS)

    Martinaitis, Vytautas; Kazakevicius, Eduardas; Vitkauskas, Aloyzas

    2007-01-01

    The renovation of residential buildings usually involves a variety of measures aiming at reducing energy and building maintenance bills, increasing safety and market value, and improving comfort and aesthetics. A significant number of project appraisal methods in current use-such as calculations of payback time, net present value, internal rate of return or cost of conserved energy (CCE)-only quantify energy efficiency gains. These approaches are relatively easy to use, but offer a distorted view of complex modernization projects. On the other hand, various methods using multiple criteria take a much wider perspective but are usually time-consuming, based on sometimes uncertain assumptions and require sophisticated tools. A 'two-factor' appraisal method offers a compromise between these two approaches. The main idea of the method is to separate investments into those related to energy efficiency improvements, and those related to building renovation. Costs and benefits of complex measures, which both influence energy consumption and improve building constructions, are separated by using a building rehabilitation coefficient. The CCE is used for the appraisal of energy efficiency investments, while investments in building renovation are appraised using standard tools for the assessment of investments in maintenance, repair and rehabilitation

  15. KPI-Driven Methodology for Urban Renovation at District Level. Sustainable Strategic Urban Planning

    Directory of Open Access Journals (Sweden)

    Cristina Criado

    2018-03-01

    Full Text Available Sustainable urban renovation is characterized by multiple factors (e.g., technical, socio-economic, environmental and ethical perspectives, different spatial scales and a number of administrative structures that should address the evaluation of alternative scenarios or solutions. This defines a complex decision problem that includes different stakeholders where several aspects need to be considered simultaneously. In spite of the knowledge and experiences during the recent years, there is a need of methods that lead the decision-making processes. In response, a methodology based on a KPI-driven approach for urban renovation at district level is proposed in the European Smart City project CITyFiED. The methodology is a procedure with the energy efficiency as main pillar and the local authorities as client. It is composed of seven phases that ensures an effective dialogue among all the stakeholders, aiming to understand the objectives and needs of the city to deliver a set of customized Strategies for Sustainable Urban Renovation. In order to provide guidance and quantitative criteria, three levels of indicators are integrated into the approach: City Level Indicators (L1 at city & district level, Project Level KPIs (L2, and Impact Assessment Indicators at city level (L3.

  16. Implicaciones ambientales de las tecnologías de energía renovable

    Directory of Open Access Journals (Sweden)

    Jan Mahirt-Smith

    2011-12-01

    Full Text Available Las tecnologías de energía renovable como la eólica, la solar y la biomasa, hacen un uso del suelo más intenso que las de combustibles fósiles tradicionales y, geográficamente, sus implicaciones ambientales son más heterogéneas, por lo que presentan un gran desafío para las técnicas de evaluación de su ciclo de vida. Este trabajo presenta los resultados de una investigación bibliográfica alrededor de los siguientes temas: 1 cambios en el uso del suelo debido a la mayor producción de energía renovable; 2 impactos del uso de suelo; 3 variabilidad geográfica en el inventario de datos; y 4 efectos de la distribución de energía. Además, se revisa el grado de investigación que actualmente se aplica acerca de las tecnologías de energía renovable en campos como el eólico, el solar y la bioenergía y en la evaluación del ciclo de vida en general.

  17. Sustainable renovation of residential buildings and the landlord/tenant dilemma

    International Nuclear Information System (INIS)

    Ástmarsson, Björn; Jensen, Per Anker; Maslesa, Esmir

    2013-01-01

    The landlord/tenant dilemma arises when the interests of landlords and tenants misalign and is one of the greatest barriers hindering the development of sustainable renovation of residential buildings in Europe. The aim of this research is to investigate how regulatory changes and contractual solutions can help solve the landlord/tenant dilemma in relation to sustainable renovation of residential buildings, and how the general awareness of sustainable renovation can be increased. Particular focus is on whether tools like energy performance contracting and energy labeling can help solve the landlord/tenant dilemma. The research was done in relation to the specific situation in Denmark, but theory, information and experiences from other countries were included. The results show that there are plenty of opportunities to overcome the landlord/tenant dilemma, but principal/agent problems can only be overcome with a package solution. In the Danish national context the package solution must consist of legislative changes, financial incentives and better dissemination of information. Therefore, an array of different tools must be integrated and used in cooperation to overcome the dilemma. - Highlights: • There are plenty of opportunities to overcome the landlord/tenant dilemma. • The principal/agent problems can only be overcome with a package solution. • An array of different tools must be integrated and used in cooperation. • Legislative changes, financial incentives and better dissemination of information

  18. Reticulospinal Systems for Tuning Motor Commands

    Directory of Open Access Journals (Sweden)

    Robert M. Brownstone

    2018-04-01

    Full Text Available The pontomedullary reticular formation (RF is a key site responsible for integrating descending instructions to execute particular movements. The indiscrete nature of this region has led not only to some inconsistencies in nomenclature, but also to difficulties in understanding its role in the control of movement. In this review article, we first discuss nomenclature of the RF, and then examine the reticulospinal motor command system through evolution. These command neurons have direct monosynaptic connections with spinal interneurons and motoneurons. We next review their roles in postural adjustments, walking and sleep atonia, discussing their roles in movement activation or inhibition. We propose that knowledge of the internal organization of the RF is necessary to understand how the nervous system tunes motor commands, and that this knowledge will underlie strategies for motor functional recovery following neurological injuries or diseases.

  19. Linux command line and shell scripting bible

    CERN Document Server

    Blum, Richard

    2014-01-01

    Talk directly to your system for a faster workflow with automation capability Linux Command Line and Shell Scripting Bible is your essential Linux guide. With detailed instruction and abundant examples, this book teaches you how to bypass the graphical interface and communicate directly with your computer, saving time and expanding capability. This third edition incorporates thirty pages of new functional examples that are fully updated to align with the latest Linux features. Beginning with command line fundamentals, the book moves into shell scripting and shows you the practical application

  20. Communication for command and control systems

    CERN Document Server

    Morris, D J

    1983-01-01

    Communication for Command and Control Systems provides a thorough exposition of the basic theoretical and practical features involved in the design of communication networks for command and control systems. This book focuses primarily on the practical side of computer-controlled communication. This text concentrates on the communication sides of the subject by surveying the means of transferring data between the various processing points and by appraising their potential advantages and possible defects in implementation. In this respect, this book should prove useful for the practicing enginee

  1. Composition of heavy metals and airborne fibers in the indoor environment of a building during renovation.

    Science.gov (United States)

    Latif, Mohd Talib; Baharudin, Nor Hafizah; Velayutham, Puvaneswary; Awang, Normah; Hamdan, Harimah; Mohamad, Ruqyyah; Mokhtar, Mazlin B

    2011-10-01

    The renovation of a building will certainly affect the quality of air in the vicinity of where associated activities were undertaken, this includes the quality of air inside the building. Indoor air pollutants such as particulate matter, heavy metals, and fine fibers are likely to be emitted during renovation work. This study was conducted to determine the concentration of heavy metals, asbestos and suspended particulates in the Biology Building, at the Universiti Kebangsaan, Malaysia (UKM). Renovation activities were carried out widely in the laboratories which were located in this building. A low-volume sampler was used to collect suspended particulate matter of a diameter size less than 10 μm (PM₁₀) and an air sampling pump, fitted with a cellulose ester membrane filter, were used for asbestos sampling. Dust was collected using a small brush and scope. The concentration of heavy metals was determined through the use of inductively coupled plasma-mass spectroscopy and the fibers were counted through a phase contrast microscope. The concentrations of PM₁₀ recorded in the building during renovation action (ranging from 166 to 542 μg m⁻³) were higher than the value set by the Department of Safety and Health for respirable dust (150 μg m⁻³). Additionally, they were higher than the value of PM₁₀ recorded in indoor environments from other studies. The composition of heavy metals in PM₁₀ and indoor dust were found to be dominated by Zn and results also showed that the concentration of heavy metals in indoor dust and PM₁₀ in this study was higher than levels recorded in other similar studies. The asbestos concentration was 0.0038 ± 0.0011 fibers/cc. This was lower than the value set by the Malaysian Department of Occupational, Safety and Health (DOSH) regulations of 0.1 fibers/cc, but higher than the background value usually recorded in indoor environments. This study strongly suggests that renovation issues need to be considered seriously

  2. Command History. 1968. Volume 1. Sanitized.

    Science.gov (United States)

    1968-01-01

    battalions. Additionally, a diary captured on 19 December, Z1 kilometers southwest of Song Cau, revealed that on 19 November the author. a cadre member...the 306th and 312th ( AYA 308th) Bns. This reorga- nization was an apparent attempt by the headquarters of MR 3 to tighten its command and con- trol. (C

  3. Commandants' Managerial Capacity and Workers Productivity in ...

    African Journals Online (AJOL)

    The purpose of this study is to evaluate the commandant's managerial capacity as if relates to workers productivity with a view to determining whether their calling to the education terrain has been justified and to correct certain areas in need of improvement in the Nigeria Police Education set up. In doing this, the study took ...

  4. Command and Control in Littoral Operations

    Science.gov (United States)

    2016-05-13

    at the graphics on the wall displaying the position of the various forces under his command. Only a few of his 14 ships were in formation with him...Mainz, 2d MEB Lead Planner (November 11, 2014). Moskowitz, Michael, and Nolan Noble. Dawn Blitz 2015- Observations and Analysis. Exercise

  5. RELATIONSHIP BETWEEN LINGUISTIC UNITS AND MOTOR COMMANDS.

    Science.gov (United States)

    FROMKIN, VICTORIA A.

    ASSUMING THAT SPEECH IS THE RESULT OF A NUMBER OF DISCRETE NEUROMUSCULAR EVENTS AND THAT THE BRAIN CAN STORE ONLY A LIMITED NUMBER OF MOTOR COMMANDS WITH WHICH TO CONTROL THESE EVENTS, THE RESEARCH REPORTED IN THIS PAPER WAS DIRECTED TO A DETERMINATION OF THE SIZE AND NATURE OF THE STORED ITEMS AND AN EXPLANATION OF HOW SPEAKERS ENCODE A SEQUENCE…

  6. Command-And-Control or Taxation?

    DEFF Research Database (Denmark)

    Oh, Christina; Svendsen, Gert Tinggaard

    2015-01-01

    an ineffective command-and-control (CAC) tool, whereas Denmark has chosen the effective tool of taxation. One main explanation for this variation in policy choice is the variation in institutional setups, namely the corporatist route in Denmark versus the pluralistic route in California....

  7. The appeal of the green deal: Empirical evidence for the influence of energy efficiency policy on renovating homeowners

    International Nuclear Information System (INIS)

    Pettifor, H.; Wilson, C.; Chryssochoidis, G.

    2015-01-01

    The Green Deal is a major new energy policy designed to support the diffusion of energy efficiency measures in UK homes. This paper provides one of the first empirical examinations of the Green Deal′s success in influencing homeowners’ renovation decisions. Using a repeated measures design in which households were questioned before and after the Green Deal′s launch in January 2013, we assess the policy′s success in raising awareness of energy efficiency. In particular, we test the effectiveness of the Green Deal′s positioning to overcome barriers to renovation among homeowners already interested in or considering energy efficiency measures. Using the innovation decision process (Rogers, 2003) as a conceptual framing of the renovation decision process, we examine whether new information on energy efficiency provided by the Green Deal strengthened intentions and its antecedents. We find that (1) energy efficiency is of potential appeal to all renovators regardless of their attitudes about energy efficiency, (2) energy efficiency opportunities need to be identified in the early stages of renovation when homeowners are thinking about ways to improve their home, and (3) homeowners’ intentions towards energy efficiency are weakened by uncertainty about financial benefits, helping to explain the relatively slow uptake of the Green Deal to-date. - Highlights: • Examines the impact of a major new energy policy, the Green Deal, on intentions towards energy efficiency. • 502 households questioned four months prior to, and seven months after the launch. • Renovating itself is mechanism through which households engage with the Green Deal. • Strengthening beliefs in energy savings accelerates intentions to renovate energy efficiently

  8. Indoor air quality in green-renovated vs. non-green low-income homes of children living in a temperate region of US (Ohio)

    International Nuclear Information System (INIS)

    Coombs, Kanistha C.; Chew, Ginger L.; Schaffer, Christopher; Ryan, Patrick H.; Brokamp, Cole; Grinshpun, Sergey A.; Adamkiewicz, Gary; Chillrud, Steve; Hedman, Curtis; Colton, Meryl; Ross, Jamie; Reponen, Tiina

    2016-01-01

    Green eco-friendly housing includes approaches to reduce indoor air pollutant sources and to increase energy efficiency. Although sealing/tightening buildings can save energy and reduce the penetration of outdoor pollutants, an adverse outcome can be increased buildup of pollutants with indoor sources. The objective of this study was to determine the differences in the indoor air quality (IAQ) between green and non-green homes in low-income housing complexes. In one housing complex, apartments were renovated using green principles (n = 28). Home visits were conducted immediately after the renovation, and subsequently at 6 months and at 12 months following the renovation. Of these homes, eight homes had pre-renovation home visits; this allowed pre- and post-renovation comparisons within the same homes. Parallel visits were conducted in non-green (control) apartments (n = 14) in a nearby low-income housing complex. The IAQ assessments included PM_2_._5, black carbon, ultrafine particles, sulfur, total volatile organic compounds (VOCs), formaldehyde, and air exchange rate. Data were analyzed using linear mixed-effects models. None of the indoor pollutant concentrations were significantly different between green and non-green homes. However, we found differences when comparing the concentrations before and after renovation. Measured immediately after renovation, indoor black carbon concentrations were significantly lower averaging 682 ng/m"3 in post-renovation vs. 2364 ng/m"3 in pre-renovation home visits (p = 0.01). In contrast, formaldehyde concentrations were significantly higher in post-renovated (0.03 ppm) than in pre-renovated homes (0.01 ppm) (p = 0.004). Questionnaire data showed that opening of windows occurred less frequently in homes immediately post-renovation compared to pre-renovation; this factor likely affected the levels of indoor black carbon (from outdoor sources) and formaldehyde (from indoor sources) more than the renovation status itself. To

  9. Indoor air quality in green-renovated vs. non-green low-income homes of children living in a temperate region of US (Ohio)

    Energy Technology Data Exchange (ETDEWEB)

    Coombs, Kanistha C. [University of Cincinnati, Department of Environmental Health, P.O. Box 670056, Cincinnati, OH (United States); Chew, Ginger L. [Centers for Disease Control and Prevention (CDC), National Center for Environmental Health, Air Pollution and Respiratory Health Branch, 4770 Buford Hwy., N.E., MS-F60, Atlanta, GA (United States); Schaffer, Christopher [University of Cincinnati, Department of Environmental Health, P.O. Box 670056, Cincinnati, OH (United States); Ryan, Patrick H. [University of Cincinnati, Department of Environmental Health, P.O. Box 670056, Cincinnati, OH (United States); Department of Pediatrics, Cincinnati Children' s Hospital Medical Center, 3333 Burnet Ave, Cincinnati, OH (United States); Brokamp, Cole; Grinshpun, Sergey A. [University of Cincinnati, Department of Environmental Health, P.O. Box 670056, Cincinnati, OH (United States); Adamkiewicz, Gary [Harvard University, T.H. Chan School of Public Health, Department of Environmental Health, 401 Park Drive, Boston, MA (United States); Chillrud, Steve [Columbia University, Lamont-Doherty Earth Observatory, Geochemistry Division, P.O. Box 8000, Palisades, New York (United States); Hedman, Curtis [University of Wisconsin-Madison, Wisconsin State Laboratory of Hygiene, 465 Henry Mall, Madison, WI (United States); Colton, Meryl [Harvard University, T.H. Chan School of Public Health, Department of Environmental Health, 401 Park Drive, Boston, MA (United States); Ross, Jamie [Columbia University, Lamont-Doherty Earth Observatory, Geochemistry Division, P.O. Box 8000, Palisades, New York (United States); Reponen, Tiina [University of Cincinnati, Department of Environmental Health, P.O. Box 670056, Cincinnati, OH (United States)

    2016-06-01

    Green eco-friendly housing includes approaches to reduce indoor air pollutant sources and to increase energy efficiency. Although sealing/tightening buildings can save energy and reduce the penetration of outdoor pollutants, an adverse outcome can be increased buildup of pollutants with indoor sources. The objective of this study was to determine the differences in the indoor air quality (IAQ) between green and non-green homes in low-income housing complexes. In one housing complex, apartments were renovated using green principles (n = 28). Home visits were conducted immediately after the renovation, and subsequently at 6 months and at 12 months following the renovation. Of these homes, eight homes had pre-renovation home visits; this allowed pre- and post-renovation comparisons within the same homes. Parallel visits were conducted in non-green (control) apartments (n = 14) in a nearby low-income housing complex. The IAQ assessments included PM{sub 2.5}, black carbon, ultrafine particles, sulfur, total volatile organic compounds (VOCs), formaldehyde, and air exchange rate. Data were analyzed using linear mixed-effects models. None of the indoor pollutant concentrations were significantly different between green and non-green homes. However, we found differences when comparing the concentrations before and after renovation. Measured immediately after renovation, indoor black carbon concentrations were significantly lower averaging 682 ng/m{sup 3} in post-renovation vs. 2364 ng/m{sup 3} in pre-renovation home visits (p = 0.01). In contrast, formaldehyde concentrations were significantly higher in post-renovated (0.03 ppm) than in pre-renovated homes (0.01 ppm) (p = 0.004). Questionnaire data showed that opening of windows occurred less frequently in homes immediately post-renovation compared to pre-renovation; this factor likely affected the levels of indoor black carbon (from outdoor sources) and formaldehyde (from indoor sources) more than the renovation status

  10. Patient satisfaction is biased by renovations to the interior of a primary care office: a pretest-posttest assessment.

    Science.gov (United States)

    Tièche, Raphaël; da Costa, Bruno R; Streit, Sven

    2016-08-11

    Measuring quality of care is essential to improve primary care. Quality of primary care for patients is usually assessed by patient satisfaction questionnaires. However, patients may not be able to judge quality of care without also reflecting their perception of the environment. We determined the effect that redesigning a primary care office had on patient satisfaction. We hypothesized that renovating the interior would make patients more satisfied with the quality of medical care. We performed a Pretest-Posttest analysis in a recently renovated single-practice primary care office in Grenchen, Switzerland. Before and after renovation, we distributed a questionnaire to assess patient satisfaction in four domains. We chose a Likert scale (1 = very poor to 6 = very good), and 12 quality indicators, and included two consecutive samples of patients presenting at the primary care office before (n = 153) and after (n = 153) interior design renovation. Response rate was high (overall 85 %). The sample was similar to the enlisted patient collective, but the sample population was older (60 years) than the collective (52 years). Patient satisfaction was higher for all domains after the office was renovated (p patient satisfaction, including satisfaction in domains otherwise unchanged. Physician skills and patient satisfaction sometimes depend on surrounding factors that may bias the ability of patients to assess the quality of medical care. These biases should be taken into account when quality assessment instruments are designed for patients.

  11. Renovation of a mechanical engineering senior design class to an industry-tied and team-oriented course

    Science.gov (United States)

    Liu, Yucheng

    2017-11-01

    In this work, an industry-based and team-oriented education model was established based on a traditional mechanical engineering (ME) senior design class in order to better prepare future engineers and leaders so as to meet the increasing demand for high-quality engineering graduates. In the renovated curriculum, industry-sponsored projects became the most important course component and critical assessment tool, from which problem-solving skills as well as employability skills of the ME students can be fully developed. Hands-on experiences in finite element analysis (FEA) modelling and simulation were also added into the renovated curriculum to promote the application of FEA on engineering design and assessment. Evaluation of the renovated course was conducted using two instruments and the results have shown that the course made the ME senior students more prepared for their future career and a win-win model was created between the industry partner and the ME programme through it. Impact of the renovated syllabus on Accreditation Board for Engineering Technology goals was discussed. Based on the current progress, a more substantial change is being planned to further improve the effectiveness and practicability of this design course. The renovated course was started to offer to the ME senior students at Mississippi State University.

  12. Intelligent Tutoring System for Teaching Battlefield Command Reasoning Skills

    National Research Council Canada - National Science Library

    Domeshek, Eric

    2002-01-01

    .... Achieving expert levels of proficiency in high-level command reasoning skills-whether for battlefield commanders or for executives in industry-requires extensive practice, coaching, and feedback...

  13. 'The Danger of Divided Command': British civil and military disputes ...

    African Journals Online (AJOL)

    Commander-in-Chief of the Indian Army, Lord Kitchener, which culminated in Curzon's ... and the officers commanding forces would have no doubt as to their .... but assuming financial responsibility for its own defence would have been ...

  14. Maritime Coalitions: When is Unity of Command Required

    National Research Council Canada - National Science Library

    Gahlinger, Gregory J

    2007-01-01

    .... The concepts of Unity of Command, Unity of Effort and Parallel, Lead Nation, or Integrated coalition command structures are viable across a broad spectrum of maritime coalition operations but do have...

  15. GPS and the Joint Force Commander: Critical Asset, Critical Vulnerability

    National Research Council Canada - National Science Library

    McPherson, Michael

    2001-01-01

    Joint Force Commanders (JFCs) have become over reliant on military and commercial satellite systems for intelligence gathering and dissemination, weather, command, control, communications, and navigation/guidance functions, to name a few...

  16. U.S. Africa Command: Shaping Africa for the Future

    National Research Council Canada - National Science Library

    Sholley, Hans

    2006-01-01

    .... It is argued the current Unified Command Plan is ill designed to address the complexities of the continent of Africa and that a proposed United States Africa Command would be better positioned...

  17. The Warfighting Capacity of Air Combat Command's Numbered Air Forces

    National Research Council Canada - National Science Library

    Hanser, Lawrence

    2000-01-01

    ...) of the Air Combat Command (ACC), General Richard E. Hawley, the ACC Commander, asked if RAND could offer an analysis of the number of NAFs that were needed by ACC to meet warfighting requirements...

  18. Design of a hybrid command and control mobile botnet

    CSIR Research Space (South Africa)

    Pieterse, H

    2013-05-01

    Full Text Available and control mobile botnet. The hybrid design explores the efficiency of multiple command and control channels against the following objectives: no single point of failure within the topology, low cost for command dissemination, limited network activities...

  19. Incorrect Responses to Locative Commands: A Case Study.

    Science.gov (United States)

    Duchan, Judith; Siegel, Leo

    1979-01-01

    A six-year-old with a language problem responded consistently to 100 locative commands by putting objects in containers and on flat surfaces regardless of the preposition or order of the nouns in the commands. (Author/CL)

  20. Evaluation of Water Quality Renovation by Advanced Soil-Based Wastewater Treatment Systems

    Science.gov (United States)

    Cooper, J.; Loomis, G.; Kalen, D.; Boving, T.; Morales, I.; DeLuca, J.; Amador, J.

    2013-12-01

    25% of US households utilize onsite wastewater treatment systems (OWTS) for wastewater management. Advanced technologies were designed to overcome the inadequate wastewater treatment by conventional OWTS in critical shallow water table areas, such as coastal zones, in order to protect ground water quality. In addition to the septic tank and soil drainfield that comprise a conventional OWTS, advanced systems claim improved water renovation with the addition of sand filtration, timed dosing controls, and shallow placement of the infiltrative zone. We determined water quality renovation functions under current water table and temperature conditions, in anticipation of an experiment to measure OWTS response to a climate change scenario of 30-cm increase in water table elevation and 4C temperature increase. Replicate (n=3) intact soil mesocosms were used to evaluate the effectiveness of drainfields with a conventional wastewater delivery (pipe-and-stone) compared to two types of pressurized, shallow narrow drainfield. Results under steady state conditions indicate complete removal of fecal coliform bacteria, phosphorus and BOD by all soil-based systems. By contrast, removal of total nitrogen inputs was 16% in conventional and 11% for both advanced drainfields. Effluent waters maintained a steady state pH between 3.2 - 3.7 for all technologies. Average DO readings were 2.9mg/L for conventional drainfield effluent and 4.6mg/L for advanced, showing the expected oxygen uptake with shallow placement of the infiltrative zone. The conventional OWTS is outperforming the advanced with respect to nitrogen removal, but renovating wastewater equivalently for all other contaminants of concern. The results of this study are expected to facilitate development of future OWTS regulation and planning guidelines, particularly in coastal zones and in the face of a changing climate.

  1. Soil and minespoil fill as media for renovation of nitrogen and phosphorus in domestic wastewater

    International Nuclear Information System (INIS)

    Peterson, C.E.; Reneau, R.B. Jr.; Hagedorn, C.

    1998-01-01

    Development of US Appalachian coal mining regions has been hampered by lack of domestic waste disposal technologies suited to fills. The suitability of on-site wastewater treatment and disposal systems (OSWTDS) in fill material is uncertain due to the effects of surface mining on soil physical properties. This research evaluated the potential for renovation of N and P present in domestic wastewater by fills from mining operations. N and P were chosen because of their potential adverse environmental impacts. Soil-fill (a mixture of Jefferson, fine-loamy, siliceous, mesic Typic Hapludult and Muskingom, fine-loamy, mixed, mesic Typic Dystrochrept soils) and minespoil (spoil)-fill (blasted rock material associated with the Taggart Marker and Low Splint Bench coal seams of the Upper Middle Wise Formation) were used. Septic tank effluent (STE) and sand filter effluent (SFE) were applied to spoil-fill columns at four loading rates and spoil-fill columns at one loading rate for a period of 20 wk. Renovation of wastewater was assessed by determining the concentration of N and P present in column leachate. Reduction of inorganic N(NO 3 - + NH 4 + ), based on N/Cl ratios ranged from 14.9 to 32.1% after the varying application rates of STE and SFE passed through the soil columns. However, leachate NO 3 - -N concentrations were still above the 10 mg -1 drinking water standard. The quantity of P emerging from the spoil-fill columns (3.0 mg PL -1 ) was higher than anticipated and may be related to the indigenous P present in the minespoil. Sorption of P in the spoil-fill column decreased with increased STE and SFE application (reduction ranged from 99.1 to 74.4%). Results from this study indicate that there is potential for renovating wastewater in OSWTDS in selected soil-fill areas in reclaimed minelands. 33 refs., 2 figs., 4 tabs

  2. Soviet command and control in a historical context

    OpenAIRE

    Kern, Jeffrey A.

    1981-01-01

    Approved for public release; distribution is unlimited An examination is made of the historical antecedents of present day command and control doctrine in the Soviet Union. The continuity of principal characteristics is demonstrated. The ideological determinants shaping the command and control system are first developed. These include centralism, collective decision-making, unity of command, and redundancy. Practical consequences of these are explored. The functioning of Soviet command...

  3. Barriers and Potential Solutions for Energy Renovation of Buildings in Denmark

    DEFF Research Database (Denmark)

    Meyer, Niels I; Mathiesen, Brian vad; Hvelplund, Frede

    2014-01-01

    the supply and demand side for heat, electricity and transport. Implementing such Smart Energy Systems requires integrated strategic energy planning on the national and local level. With the fundamental changes in the energy supply technologies expected during the coming years, it is important to synchronize...... investments in energy conservation measures with investments in the supply side, in order to avoid overinvestment in supply systems and thus to minimize the total costs of the transformation to Smart Energy Systems. This paper highlights some of the most important barriers for renovation of existing buildings...

  4. Analysis of Solar Energy Use for Multi-Flat Buildings Renovation

    Directory of Open Access Journals (Sweden)

    Kęstutis Valančius

    2016-10-01

    Full Text Available The paper analyses the energy and financial possibilities to install renewable energy sources (solar energy generating systems when renovating multi-flat buildings. The aim is to analyse solar energy system possibilities for modernization of multi-flat buildings (5-storey, 9-storey and 16-storey, providing detailed conclusions about the appropriateness of the energy systems and financial aspects. It is also intended to determine the optimal technological combinations and solutions to reach the maximum energy benefits. For the research computer simulation tools “EnergyPRO” and “PV*SOL Premium” are chosen. Also actual collected heat and electricity consumption data is used for the analysis.

  5. A BIM-based system for demolition and renovation waste estimation and planning

    International Nuclear Information System (INIS)

    Cheng, Jack C.P.; Ma, Lauren Y.H.

    2013-01-01

    Highlights: ► We developed a waste estimation system leveraging the BIM technology. ► The system can calculate waste disposal charging fee and pick-up truck demand. ► We presented an example scenario demonstrating this system. ► Automatic, time-saving and wide applicability are the features of the system. - Abstract: Due to the rising worldwide awareness of green environment, both government and contractors have to consider effective construction and demolition (C and D) waste management practices. The last two decades have witnessed the growing importance of demolition and renovation (D and R) works and the growing amount of D and R waste disposed to landfills every day, especially in developed cities like Hong Kong. Quantitative waste prediction is crucial for waste management. It can enable contractors to pinpoint critical waste generation processes and to plan waste control strategies. In addition, waste estimation could also facilitate some government waste management policies, such as the waste disposal charging scheme in Hong Kong. Currently, tools that can accurately and conveniently estimate the amount of waste from construction, renovation, and demolition projects are lacking. In the light of this research gap, this paper presents a building information modeling (BIM) based system that we have developed for estimation and planning of D and R waste. BIM allows multi-disciplinary information to be superimposed within one digital building model. Our system can extract material and volume information through the BIM model and integrate the information for detailed waste estimation and planning. Waste recycling and reuse are also considered in our system. Extracted material information can be provided to recyclers before demolition or renovation to make recycling stage more cooperative and more efficient. Pick-up truck requirements and waste disposal charging fee for different waste facilities will also be predicted through our system. The results

  6. A BIM-based system for demolition and renovation waste estimation and planning

    Energy Technology Data Exchange (ETDEWEB)

    Cheng, Jack C.P., E-mail: cejcheng@ust.hk [Department of Civil and Environmental Engineering, The Hong Kong University of Science and Technology (Hong Kong); Ma, Lauren Y.H., E-mail: yingzi@ust.hk [Department of Civil and Environmental Engineering, The Hong Kong University of Science and Technology (Hong Kong)

    2013-06-15

    Highlights: ► We developed a waste estimation system leveraging the BIM technology. ► The system can calculate waste disposal charging fee and pick-up truck demand. ► We presented an example scenario demonstrating this system. ► Automatic, time-saving and wide applicability are the features of the system. - Abstract: Due to the rising worldwide awareness of green environment, both government and contractors have to consider effective construction and demolition (C and D) waste management practices. The last two decades have witnessed the growing importance of demolition and renovation (D and R) works and the growing amount of D and R waste disposed to landfills every day, especially in developed cities like Hong Kong. Quantitative waste prediction is crucial for waste management. It can enable contractors to pinpoint critical waste generation processes and to plan waste control strategies. In addition, waste estimation could also facilitate some government waste management policies, such as the waste disposal charging scheme in Hong Kong. Currently, tools that can accurately and conveniently estimate the amount of waste from construction, renovation, and demolition projects are lacking. In the light of this research gap, this paper presents a building information modeling (BIM) based system that we have developed for estimation and planning of D and R waste. BIM allows multi-disciplinary information to be superimposed within one digital building model. Our system can extract material and volume information through the BIM model and integrate the information for detailed waste estimation and planning. Waste recycling and reuse are also considered in our system. Extracted material information can be provided to recyclers before demolition or renovation to make recycling stage more cooperative and more efficient. Pick-up truck requirements and waste disposal charging fee for different waste facilities will also be predicted through our system. The results

  7. Proyectos pilotos WHIX de energía renovable y seguridad ambiental en El Salvador.

    OpenAIRE

    Ochoa Córdova, Carlos Roberto

    2008-01-01

    El Programa WHIX aporta proyectos de Energía y Medio Ambiente para abrir un diálogo entre los militares de la Región, organizaciones gubernamentales y no-gubernamentales y sus equivalentes en los EE.UU. Este programa cataliza proyectos de energía renovable y el medioambiente para demostrar y validar estas tecnologías en los países de la región. Al mismo tiempo provee un foro de intercambio internacional de las “Mejores Prácticas” y la oportunidad de trabajar en conjunto en promisorias investi...

  8. A BIM-based system for demolition and renovation waste estimation and planning.

    Science.gov (United States)

    Cheng, Jack C P; Ma, Lauren Y H

    2013-06-01

    Due to the rising worldwide awareness of green environment, both government and contractors have to consider effective construction and demolition (C&D) waste management practices. The last two decades have witnessed the growing importance of demolition and renovation (D&R) works and the growing amount of D&R waste disposed to landfills every day, especially in developed cities like Hong Kong. Quantitative waste prediction is crucial for waste management. It can enable contractors to pinpoint critical waste generation processes and to plan waste control strategies. In addition, waste estimation could also facilitate some government waste management policies, such as the waste disposal charging scheme in Hong Kong. Currently, tools that can accurately and conveniently estimate the amount of waste from construction, renovation, and demolition projects are lacking. In the light of this research gap, this paper presents a building information modeling (BIM) based system that we have developed for estimation and planning of D&R waste. BIM allows multi-disciplinary information to be superimposed within one digital building model. Our system can extract material and volume information through the BIM model and integrate the information for detailed waste estimation and planning. Waste recycling and reuse are also considered in our system. Extracted material information can be provided to recyclers before demolition or renovation to make recycling stage more cooperative and more efficient. Pick-up truck requirements and waste disposal charging fee for different waste facilities will also be predicted through our system. The results could provide alerts to contractors ahead of time at project planning stage. This paper also presents an example scenario with a 47-floor residential building in Hong Kong to demonstrate our D&R waste estimation and planning system. As the BIM technology has been increasingly adopted in the architectural, engineering and construction industry

  9. Problemas institucionales de las energías renovables en México

    OpenAIRE

    Samuel Brugger; Ma. Elena Nancy Dávila Moreno; Manuel Francisco Llamas Galván

    2011-01-01

    Este ensayo trata de explicar los problemas institucionales y jurídicos que han limitado el aprovechamiento de dichas energías alternativas. El trabajo presenta la situación actual de México; después analiza el potencial que tiene el país. De ahí se pasa al estudio de la problemática institucional y jurídica que no ha logrado fomentar la promoción de energías renovables en México.

  10. Problemas institucionales de las energías renovables en México

    Directory of Open Access Journals (Sweden)

    Samuel Brugger

    2011-09-01

    Full Text Available Este ensayo trata de explicar los problemas institucionales y jurídicos que han limitado el aprovechamiento de dichas energías alternativas. El trabajo presenta la situación actual de México; después analiza el potencial que tiene el país. De ahí se pasa al estudio de la problemática institucional y jurídica que no ha logrado fomentar la promoción de energías renovables en México.

  11. Land Application of Wastes: An Educational Program. Soil as a Treatment Medium - Module 3, Objectives, Script and Booklet.

    Science.gov (United States)

    Clarkson, W. W.; And Others

    This module examines the basic properties of soil which have an influence on the success of land treatment of wastes. These relevant properties include soil texture, soil structure, permeability, infiltration, available water capacity, and cation exchange capacity. Biological, chemical and physical mechanisms work to remove and renovate wastes…

  12. 32 CFR 700.1056 - Command of a ship.

    Science.gov (United States)

    2010-07-01

    ... 32 National Defense 5 2010-07-01 2010-07-01 false Command of a ship. 700.1056 Section 700.1056 National Defense Department of Defense (Continued) DEPARTMENT OF THE NAVY UNITED STATES NAVY REGULATIONS AND OFFICIAL RECORDS UNITED STATES NAVY REGULATIONS AND OFFICIAL RECORDS Precedence, Authority and Command Detail to Duty § 700.1056 Command of a...

  13. U.S. Pacific Command > About USPACOM > History

    Science.gov (United States)

    USPACOM U.S. Pacific Command Search USPACOM: Search Search Search USPACOM: Search Home Leadership People's Republic of China, the Democratic People's Republic of Korea, Mongolia, and the Republic of its surrounding waters under the leadership of one commander, providing a unity of command absent from

  14. Design of a hybrid command and control mobile botnet: Presentation

    CSIR Research Space (South Africa)

    Pieterse, H

    2013-03-01

    Full Text Available smartphones controlled by a botmaster through a command and control network to serve a malicious purpose. This study presents the design of a hybrid command and control mobile botnet. It describes the propagation vectors, command and control channels...

  15. ARAC: A unique command and control resource

    International Nuclear Information System (INIS)

    Bradley, M.M.; Baskett, R.L.; Ellis, J.S.

    1996-04-01

    The Atmospheric Release Advisory Capability (ARAC) at Lawrence Livermore National Laboratory (LLNL) is a centralized federal facility designed to provide real-time, world-wide support to military and civilian command and control centers by predicting the impacts of inadvertent or intentional releases of nuclear, biological, or chemical materials into the atmosphere. ARAC is a complete response system consisting of highly trained and experienced personnel, continually updated computer models, redundant data collection systems, and centralized and remote computer systems. With over 20 years of experience responding to domestic and international incidents, strong linkages with the Department of Defense, and the ability to conduct classified operations, ARAC is a unique command and control resource

  16. ARAC: A unique command and control resource

    Energy Technology Data Exchange (ETDEWEB)

    Bradley, M.M.; Baskett, R.L.; Ellis, J.S. [and others

    1996-04-01

    The Atmospheric Release Advisory Capability (ARAC) at Lawrence Livermore National Laboratory (LLNL) is a centralized federal facility designed to provide real-time, world-wide support to military and civilian command and control centers by predicting the impacts of inadvertent or intentional releases of nuclear, biological, or chemical materials into the atmosphere. ARAC is a complete response system consisting of highly trained and experienced personnel, continually updated computer models, redundant data collection systems, and centralized and remote computer systems. With over 20 years of experience responding to domestic and international incidents, strong linkages with the Department of Defense, and the ability to conduct classified operations, ARAC is a unique command and control resource.

  17. Automated constraint checking of spacecraft command sequences

    Science.gov (United States)

    Horvath, Joan C.; Alkalaj, Leon J.; Schneider, Karl M.; Spitale, Joseph M.; Le, Dang

    1995-01-01

    Robotic spacecraft are controlled by onboard sets of commands called "sequences." Determining that sequences will have the desired effect on the spacecraft can be expensive in terms of both labor and computer coding time, with different particular costs for different types of spacecraft. Specification languages and appropriate user interface to the languages can be used to make the most effective use of engineering validation time. This paper describes one specification and verification environment ("SAVE") designed for validating that command sequences have not violated any flight rules. This SAVE system was subsequently adapted for flight use on the TOPEX/Poseidon spacecraft. The relationship of this work to rule-based artificial intelligence and to other specification techniques is discussed, as well as the issues that arise in the transfer of technology from a research prototype to a full flight system.

  18. Operational Maneuver from the Sea and Amphibious Command Relationships: Is It time for a Joint Force Amphibious Component Commander?

    National Research Council Canada - National Science Library

    Bennett, Michael

    2004-01-01

    .... In a joint community that is becoming increasingly dependant on the use of functional component commanders in the execution of major operations, the need for a Joint Force Amphibious Component Commander (JFAMCC...

  19. Commanders’ Perception of Risk: Enabling Boldness

    Science.gov (United States)

    2008-04-01

    individual. Soldiers are trained over time to employ their weapon systems tinder a variety of conditions in, realistic simulations and scenarios, thus...from ground combat the specialty is, where th~ leader provides the same support in combat that he would in garrison with no direct relationship to an...34 safety paperwork and activities. 73 Senior commanders must aggressively search for means to communicate their intent and the relationship between

  20. Command and Control for Distributed Lethality

    Science.gov (United States)

    2017-06-01

    extended communications between the AFP CDR and the CCDR are required. As shown in Figure 20, the principle command relationships are between...frequency (RF) communications are limited by maximum antenna height of each surface platform without an airborne relay. LOS is estimated with an online ...documents the interconnections and relationship of information flow and the system requirements for maintaining the interconnection links during a

  1. Jimmy Doolittle: The Commander behind the Legend

    Science.gov (United States)

    2015-02-01

    was 35 percent and that, although luxury items were cheap, food and other necessities were expensive. He speculated that everyone in Germany...British Spitfire groups, one troop-carrier group, one light-bombardment group, and three medium-bombardment groups.123 He later observed, “I was a brand ...a very popular commander, Ira Eaker, was perhaps the first. Eaker had served in the Eighth since its incep- tion and led its first independent attack

  2. Tools virtualization for command and control systems

    Science.gov (United States)

    Piszczek, Marek; Maciejewski, Marcin; Pomianek, Mateusz; Szustakowski, Mieczysław

    2017-10-01

    Information management is an inseparable part of the command process. The result is that the person making decisions at the command post interacts with data providing devices in various ways. Tools virtualization process can introduce a number of significant modifications in the design of solutions for management and command. The general idea involves replacing physical devices user interface with their digital representation (so-called Virtual instruments). A more advanced level of the systems "digitalization" is to use the mixed reality environments. In solutions using Augmented reality (AR) customized HMI is displayed to the operator when he approaches to each device. Identification of device is done by image recognition of photo codes. Visualization is achieved by (optical) see-through head mounted display (HMD). Control can be done for example by means of a handheld touch panel. Using the immersive virtual environment, the command center can be digitally reconstructed. Workstation requires only VR system (HMD) and access to information network. Operator can interact with devices in such a way as it would perform in real world (for example with the virtual hands). Because of their procedures (an analysis of central vision, eye tracking) MR systems offers another useful feature of reducing requirements for system data throughput. Due to the fact that at the moment we focus on the single device. Experiments carried out using Moverio BT-200 and SteamVR systems and the results of experimental application testing clearly indicate the ability to create a fully functional information system with the use of mixed reality technology.

  3. Auftragstaktik: The Basis for Modern Military Command?

    Science.gov (United States)

    2012-12-06

    Pauli’s Nachf, 1892. Showalter, Dennis. The Wars of German Unification. London: Hodder Education , 2004. Simpkin, Richard. Race to the Swift. London...to the bourgeois class again, making education , not social position, the deciding factor for obtaining a commission.15 The army created a system of...only reflected the increased education and capability of the new officer corps, but also the reality of commanding an army in the Napoleonic era

  4. Mission Command In A Communications Denied Environment

    Science.gov (United States)

    2017-02-16

    the mutual trust between the echelons.8 In the United States armed forces, the Joint Chiefs have understood the value of...without being over controlling or micromanaging.12 During the execution phase the commander is the free to choose his position on the battlefield to... the Air Force Association Convention, National Harbor, MD, September 16, 2009, accessed at http://www.defenselink.mil/ speeches

  5. Naval Meteorology and Oceanography Command exhibit entrance

    Science.gov (United States)

    2000-01-01

    StenniSphere at NASA's John C. Stennis Space Center in Hancock County, Miss., invites visitors to discover why America comes to Stennis Space Center before going into space. Designed to entertain while educating, StenniSphere includes informative displays and exhibits from NASA and other agencies located at Stennis, such as this one from the Naval Meteorology and Oceanography Command. Visitors can 'travel' three-dimensionally under the sea and check on the weather back home in the Weather Center.

  6. Naval Meteorology and Oceanography Command exhibit

    Science.gov (United States)

    2000-01-01

    Designed to entertain while educating, StenniSphere at the John C. Stennis Space Center in Hancock County, Miss., includes informative displays and exhibits from NASA and other agencies located at Stennis, such as this one from the Naval Meteorology and Oceanography Command. Visitors can 'travel' three-dimensionally under the sea and check on the weather back home in the Weather Center. StenniSphere is open free of charge from 9 a.m. to 5 p.m. daily.

  7. The role of interfacial layers in the enhanced thermal conductivity of nanofluids: A renovated Hamilton-Crosser model

    International Nuclear Information System (INIS)

    Yu, W; Choi, S.U.S.

    2004-01-01

    We previously developed a renovated Maxwell model for the effective thermal conductivity of nanofluids and determined that the solid/liquid interfacial layers play an important role in the enhanced thermal conductivity of nanofluids. However, this renovated Maxwell model is limited to suspensions with spherical particles. Here, we extend the Hamilton--Crosser model for suspensions of nonspherical particles to include the effect of a solid/liquid interface. The solid/liquid interface is described as a confocal ellipsoid with a solid particle. The new model for the three-phase suspensions is mathematically expressed in terms of the equivalent thermal conductivity and equivalent volume fraction of anisotropic complex ellipsoids, as well as an empirical shape factor. With a generalized empirical shape factor, the renovated Hamilton--Crosser model correctly predicts the magnitude of the thermal conductivity of nanotube-in-oil nanofluids. At present, this new model is not able to predict the nonlinear behavior of the nanofluid thermal conductivity

  8. A design proposal of a certain missile tactical command system based on Beidou satellite communication and GPS positioning techniques

    Science.gov (United States)

    Ma, Jian; Hao, Yongsheng; Miao, Jian; Zhang, Jianmao

    2007-11-01

    This paper introduced a design proposal of tactical command system that applied to a kind of anti-tank missile carriers. The tactical command system was made up of embedded computer system based on PC104 bus, Linux operating system, digital military map, Beidou satellite communication equipments and GPS positioning equipments. The geographic coordinates was measured by the GPS receiver, the positioning data, commands and information were transmitted real-time between tactical command systems, tactical command systems and command center, by the Beidou satellite communication systems. The Beidou satellite communication equipments and GPS positioning equipments were integrated to an independent module, exchanging data with embedded computer through RS232 serial ports and USB ports. The decision support system software based on information fusion, calculates positioning data, geography information and battle field information synthetically, shows the position of allies and the position of enemy on the military map, and assesses the various threats of different enemy objects, educes a situation assessment and threat assessment.

  9. Command Interface ASIC - Analog Interface ASIC Chip Set

    Science.gov (United States)

    Ruiz, Baldes; Jaffe, Burton; Burke, Gary; Lung, Gerald; Pixler, Gregory; Plummer, Joe; Katanyoutanant,, Sunant; Whitaker, William

    2003-01-01

    A command interface application-specific integrated circuit (ASIC) and an analog interface ASIC have been developed as a chip set for remote actuation and monitoring of a collection of switches, which can be used to control generic loads, pyrotechnic devices, and valves in a high-radiation environment. The command interface ASIC (CIA) can be used alone or in combination with the analog interface ASIC (AIA). Designed primarily for incorporation into spacecraft control systems, they are also suitable for use in high-radiation terrestrial environments (e.g., in nuclear power plants and facilities that process radioactive materials). The primary role of the CIA within a spacecraft or other power system is to provide a reconfigurable means of regulating the power bus, actuating all valves, firing all pyrotechnic devices, and controlling the switching of power to all switchable loads. The CIA is a mixed-signal (analog and digital) ASIC that includes an embedded microcontroller with supporting fault-tolerant switch control and monitoring circuitry that is capable of connecting to a redundant set of interintegrated circuit (I(sup 2)C) buses. Commands and telemetry requests are communicated to the CIA. Adherence to the I(sup 2)C bus standard helps to reduce development costs by facilitating the use of previously developed, commercially available components. The AIA is a mixed-signal ASIC that includes the analog circuitry needed to connect the CIA to a custom higher powered version of the I(sup 2)C bus. The higher-powered version is designed to enable operation with bus cables longer than those contemplated in the I(sup 2)C standard. If there are multiple higher-power I(sup 2)C-like buses, then there must an AIA between the CIA and each such bus. The AIA includes two identical interface blocks: one for the side-A I(sup 2)C clock and data buses and the other for the side B buses. All the AIAs on each side are powered from a common power converter module (PCM). Sides A and B

  10. Analysis and Monitoring of Energy Consumption and Indoor Climate in a School Before and After Deep Energy Renovation

    DEFF Research Database (Denmark)

    Rose, Jørgen; Thomsen, Kirsten Engelund; Bergsøe, Niels Christian

    2015-01-01

    kindergartens/institutions -- that will undergo deep energy renovation over the next fewyears.The seven buildings are being energy-renovated and monitored with support from the European Union- CONCERTO initiative as part of the project titled Cost-Effective Low-Energy Advanced Sustainable Solutions -- Class1...... ventilation systems with heat recovery, low-energy lighting, water-saving measures, improved insulation of piping, and improved control using building energy management systems. This paper presents preliminary results of the analysis and monitoring of energy consumption and indoor climate in one public school...

  11. Energy renovation of single-family houses in Denmark utilising long-term financing based on equity

    DEFF Research Database (Denmark)

    Kragh, Jesper; Rose, Jørgen

    2011-01-01

    This paper aims to present an economic overview of the opportunities for energy renovation of single-family houses in Denmark financed over the long term. The paper focuses on the economic difference between energy savings and the repayment of investment. Taking out the average remaining 20% equity...... in long-term property mortgage loans and utilising it for extensive energy renovation improves both the economy and the extent of included measures. Approximately 30% of energy consumption in Denmark is used for space heating. The existing 1 million single-family houses account for approximately half...

  12. Possible financing schemes for one-stop-shop service for sustainable renovation of single-family houses

    DEFF Research Database (Denmark)

    Mahapatra, Krushna; Gustavsson, Leif; Haavik, Trond

    energy use behaviour of the occupants and the difficulty to predict future energy prices. The options to finance energy efficiency renovations include homeowners’ own resources, mortgage refinancing, flex loan, personal loan, financing by service providers, preferential loan, subsidies/grants, credit...... for the homeowners, and banks will have a less risky asset in their portfolio. In situations where homeowners cannot avail additional mortgage financing, e.g. those who recently purchased a house and used the limit to such loans, banks may consider an energy efficient renovation plan prepared by an entrepreneur...

  13. The Phenomenon of Trust in Flat Owners’ Collective Renovation Strategies in Estonia

    Directory of Open Access Journals (Sweden)

    Liis Ojamäe

    2015-12-01

    Full Text Available Mobilising fl at owners into renovating residential blocks in post-socialist countries has been a complicated process. Evidence from Estonia shows that the success of collective renewal strategies depends not only on economic issues but also on ways investments are organised and, signifi cantly, the relationship of trust between diff erent actors. The paper aims at conceptualising the issue of institutional trust upon the experience of urban housing renewal in Estonia. It is contended that trust is crucial for the joint decision-making in a block as well as for facilitating negotiations between fl at owners’ associations, local municipalities and market actors. The paper draws on three qualitative studies conducted in Estonia during the 2000s, which allow asserting that trust towards new strategies of housing renewal can be achieved and maintained by ‘best practices’, which by concentrating expert knowledge also denote direct communication between experts and fl at owners. While it is important to raise the residents’ technical knowledgeability, it is indispensable to develop abilities to manage and communicate the renovation process between diff erent parties. The public sector is conceived to be a central actor in sustaining trust between actors who have no previous positive experience from collective residential strategies

  14. Energy and comfort performance evaluation after renovation of an office building

    Energy Technology Data Exchange (ETDEWEB)

    Renzi, V.; Burgun, F. [Inst. National de l' Energie Solaire, Le Bourget du Lac (France)

    2009-07-01

    Buildings constitute 42.5 per cent of the energy consumption in Europe. As such, the building sector represents a high potential for innovation in terms of reducing global energy consumption. Since existing buildings represent a large part of the built environment, refurbishment is an important issue to consider. However, efficient processes of renovation must be well defined. France's National Institute of Solar Energy has developed a methodology to reduce consumption of primary energy use and decrease greenhouse gas emissions in the built environment, while increasing user comfort. The methodology places much emphasis on the health and comfort of occupants from the very beginning of the process. The methodology was developed to make the building renovation process more efficient by elaborating generic guidelines and tools. In this study, an office building from the 1970s was refurbished and monitored for both energy performance and comfort. The objective was to better understand the technological and psychosocial aspects involved in refurbishing an old building. Measurements were compared with the perception of the occupants. The impacts of human interaction on the building behaviour was also evaluated. 6 refs., 1 tab., 4 figs.

  15. Means for the regulation of renewable energies; Instrumentos de regulacion para renovables

    Energy Technology Data Exchange (ETDEWEB)

    Peraza, Alejandro [Comision Reguladora de Energia, Mexico (Mexico)

    2007-06-15

    It is basically described in this presentation, those means used by the Comision Reguladora de Energia (CRE) in order to control the distribution of the available renewable energies, as well as to show the modifications done to its contracts. Besides, there are described the most relevant information about the CRE's law. There are mentioned some of the changes done to some clauses of different contracts, among the contracts found here there can be: contract for the interconnection of renewable energies, contract for the interconnection for a small source of solar energy. [Spanish] En esta presentacion se describen primordialmente los instrumentos que la Comision Reguladora de Energia (CRE) utiliza con el fin de reglamentar la distribucion de las diversas energias renovables disponibles, asi como mostrar las modificaciones que se han realizado en sus contratos. Ademas, se describen los principales aspectos de la Ley de la CRE. Asimismo, se mencionan algunas de las modificaciones que se les ha hecho a diversos contratos: Contrato de interconexion de renovables, contrato de interconexion para fuente de energia solar en pequena escala.

  16. The CABRI fast neutron Hodoscope: Renovation, qualification program and first results following the experimental reactor restart

    Science.gov (United States)

    Chevalier, V.; Mirotta, S.; Guillot, J.; Biard, B.

    2018-01-01

    The CABRI experimental pulse reactor, located at the Cadarache nuclear research center, southern France, is devoted to the study of Reactivity Initiated Accidents (RIA). For the purpose of the CABRI International Program (CIP), managed and funded by IRSN, in the framework of an OECD/NEA agreement, a huge renovation of the facility has been conducted since 2003. The Cabri Water Loop was then installed to ensure prototypical Pressurized Water Reactor (PWR) conditions for testing irradiated fuel rods. The hodoscope installed in the CABRI reactor is a unique online fuel motion monitoring system, operated by IRSN and dedicated to the measurement of the fast neutrons emitted by the tested rod during the power pulse. It is one of the distinctive features of the CABRI reactor facility, which is operated by CEA. The system is able to determine the fuel motion, if any, with a time resolution of 1 ms and a spatial resolution of 3 mm. The hodoscope equipment has been upgraded as well during the CABRI facility renovation. This paper presents the main outcomes achieved with the hodoscope since October 2015, date of the first criticality of the CABRI reactor in its new Cabri Water Loop configuration. Results obtained during reactor commissioning phase functioning, either in steady-state mode (at low and high power, up to 23 MW) or in transient mode (start-up, possibly beyond 20 GW), are discussed.

  17. EKF-GPR-Based Fingerprint Renovation for Subset-Based Indoor Localization with Adjusted Cosine Similarity.

    Science.gov (United States)

    Yang, Junhua; Li, Yong; Cheng, Wei; Liu, Yang; Liu, Chenxi

    2018-01-22

    Received Signal Strength Indicator (RSSI) localization using fingerprint has become a prevailing approach for indoor localization. However, the fingerprint-collecting work is repetitive and time-consuming. After the original fingerprint radio map is built, it is laborious to upgrade the radio map. In this paper, we describe a Fingerprint Renovation System (FRS) based on crowdsourcing, which avoids the use of manual labour to obtain the up-to-date fingerprint status. Extended Kalman Filter (EKF) and Gaussian Process Regression (GPR) in FRS are combined to calculate the current state based on the original fingerprinting radio map. In this system, a method of subset acquisition also makes an immediate impression to reduce the huge computation caused by too many reference points (RPs). Meanwhile, adjusted cosine similarity (ACS) is employed in the online phase to solve the issue of outliers produced by cosine similarity. Both experiments and analytical simulation in a real Wireless Fidelity (Wi-Fi) environment indicate the usefulness of our system to significant performance improvements. The results show that FRS improves the accuracy by 19.6% in the surveyed area compared to the radio map un-renovated. Moreover, the proposed subset algorithm can bring less computation.

  18. EKF–GPR-Based Fingerprint Renovation for Subset-Based Indoor Localization with Adjusted Cosine Similarity

    Science.gov (United States)

    Yang, Junhua; Li, Yong; Cheng, Wei; Liu, Yang; Liu, Chenxi

    2018-01-01

    Received Signal Strength Indicator (RSSI) localization using fingerprint has become a prevailing approach for indoor localization. However, the fingerprint-collecting work is repetitive and time-consuming. After the original fingerprint radio map is built, it is laborious to upgrade the radio map. In this paper, we describe a Fingerprint Renovation System (FRS) based on crowdsourcing, which avoids the use of manual labour to obtain the up-to-date fingerprint status. Extended Kalman Filter (EKF) and Gaussian Process Regression (GPR) in FRS are combined to calculate the current state based on the original fingerprinting radio map. In this system, a method of subset acquisition also makes an immediate impression to reduce the huge computation caused by too many reference points (RPs). Meanwhile, adjusted cosine similarity (ACS) is employed in the online phase to solve the issue of outliers produced by cosine similarity. Both experiments and analytical simulation in a real Wireless Fidelity (Wi-Fi) environment indicate the usefulness of our system to significant performance improvements. The results show that FRS improves the accuracy by 19.6% in the surveyed area compared to the radio map un-renovated. Moreover, the proposed subset algorithm can bring less computation. PMID:29361805

  19. Indoor air quality in green-renovated vs. non-green low-income homes of children living in a temperate region of US (Ohio).

    Science.gov (United States)

    Coombs, Kanistha C; Chew, Ginger L; Schaffer, Christopher; Ryan, Patrick H; Brokamp, Cole; Grinshpun, Sergey A; Adamkiewicz, Gary; Chillrud, Steve; Hedman, Curtis; Colton, Meryl; Ross, Jamie; Reponen, Tiina

    2016-06-01

    Green eco-friendly housing includes approaches to reduce indoor air pollutant sources and to increase energy efficiency. Although sealing/tightening buildings can save energy and reduce the penetration of outdoor pollutants, an adverse outcome can be increased buildup of pollutants with indoor sources. The objective of this study was to determine the differences in the indoor air quality (IAQ) between green and non-green homes in low-income housing complexes. In one housing complex, apartments were renovated using green principles (n=28). Home visits were conducted immediately after the renovation, and subsequently at 6 months and at 12 months following the renovation. Of these homes, eight homes had pre-renovation home visits; this allowed pre- and post-renovation comparisons within the same homes. Parallel visits were conducted in non-green (control) apartments (n=14) in a nearby low-income housing complex. The IAQ assessments included PM2.5, black carbon, ultrafine particles, sulfur, total volatile organic compounds (VOCs), formaldehyde, and air exchange rate. Data were analyzed using linear mixed-effects models. None of the indoor pollutant concentrations were significantly different between green and non-green homes. However, we found differences when comparing the concentrations before and after renovation. Measured immediately after renovation, indoor black carbon concentrations were significantly lower averaging 682 ng/m(3) in post-renovation vs. 2364 ng/m(3) in pre-renovation home visits (p=0.01). In contrast, formaldehyde concentrations were significantly higher in post-renovated (0.03 ppm) than in pre-renovated homes (0.01 ppm) (p=0.004). Questionnaire data showed that opening of windows occurred less frequently in homes immediately post-renovation compared to pre-renovation; this factor likely affected the levels of indoor black carbon (from outdoor sources) and formaldehyde (from indoor sources) more than the renovation status itself. To reduce IAQ

  20. Renovation of CPF (Chemical Processing Facility) for Development of Advanced Fast Reactor Fuel Cycle System

    International Nuclear Information System (INIS)

    Shinichi Aose; Takafumi Kitajima; Kouji Ogasawara; Kazunori Nomura; Shigehiko Miyachi; Yoshiaki Ichige; Tadahiro Shinozaki; Shinichi Ohuchi

    2008-01-01

    CPF (Chemical Processing Facility) was constructed at Nuclear Fuel Cycle Engineering Laboratories of JAEA (Japan Atomic Energy Agency) in 1980 as a basic research field where spent fuel pins from fast reactor (FR) and high level liquid waste can be dealt with. The renovation consists of remodeling of the CA-3 cell and the laboratory A, installation of globe boxes, hoods and analytical equipments to the laboratory C and the analytical laboratory. Also maintenance equipments in the CA-5 cell which had been out of order were repaired. The CA-3 cell is the main cell in which important equipments such as a dissolver, a clarifier and extractors are installed for carrying out the hot test using the irradiated FR fuel. Since the CPF had specialized originally in the research function for the Purex process, it was desired to execute the research and development of such new, various reprocessing processes. Formerly, equipments were arranged in wide space and connected with not only each other but also with utility supply system mainly by fixed stainless steel pipes. It caused shortage of operation space in flexibility for basic experimental study. Old equipments in the CA-3 cell including vessels and pipes were removed after successful decontamination, and new equipments were installed conformably to the new design. For the purpose of easy installation and rearranging the experimental equipments, equipments are basically connected by flexible pipes. Since dissolver is able to be easily replaced, various dissolution experiments is conducted. Insoluble residue generated by dissolution of spent fuel is clarified by centrifugal. This small apparatus is effective to space-saving. Mini mixer settlers or centrifugal contactors are put on to the prescribed limited space in front of the backside wall. Fresh reagents such as solvent, scrubbing and stripping solution are continuously fed from the laboratory A to the extractor by the reagent supply system with semi-automatic observation

  1. Initiatives for the energy renovation of single-family houses inDenmark evaluated on the basis of barriers and motivators

    DEFF Research Database (Denmark)

    Grøn Bjørneboe, Matilde; Svendsen, Svend; Heller, Alfred

    2018-01-01

    The renovation of single-family houses in Denmark is progressing only slowly. Changes in current pol-icy are needed if the political goal of a fossil-free building sector as part of a fossil-free society is to beachieved. Known barriers and motivators for energy renovation are identified, and arr......The renovation of single-family houses in Denmark is progressing only slowly. Changes in current pol-icy are needed if the political goal of a fossil-free building sector as part of a fossil-free society is to beachieved. Known barriers and motivators for energy renovation are identified......, suggestions are madefor improvement in four areas: (1) focus on non-energy benefits rather than investment, (2) enhance-ment of subsidy system, (3) including relevant renovation plans in the energy performance certificate(EPC), and (4) long-term regulation on the maximum allowed energy consumption of houses....

  2. Revision of documents guide to obtain the renovation of licence of the nuclear power plant of Laguna Verde, Units I and II

    International Nuclear Information System (INIS)

    Jarvio C, G.; Fernandez S, G.

    2008-01-01

    Unquestionably the renovation of license of the nuclear power plants , it this converting in a promising option to be able to gather in sure, reliable form and economic those requests about future energy in the countries with facilities of this type. This work it analyzes four documents guide and their application for the determination of the renovation of it licenses in nuclear plants that will serve of base for their aplication in the Nuclear Power Plant of Laguna Verde Units I and 2. The four documents in question are: the one Inform Generic of Learned Lessons on the Aging (NUREG - 1801), the Standard Revision Plan for the Renovation of License (NUREG - 1800), the Regulatory Guide for Renovation of License (GR-1.188), and the NEI 95-10, developed by the Institute of Nuclear Energy that is an Industrial Guide to Implement the Requirements of the 1OCFR Part 54-the Rule of Renovation of It licenses. (Author)

  3. Study on control method of the actuators accepting commands from different classifications in nuclear power plant

    International Nuclear Information System (INIS)

    Tang Lixue; Zhang Nan; Fan Jin; Li Liang

    2015-01-01

    The distributed control system has become the main control system for the nuclear power plant, consisting of 1E and non-1E parts. Because the safety actuators accept commands from different safety classifications, this is a difficulty of controlling those actuators in nuclear power plant. This article discusses about the control method for safety actuators accepting commands from different classifications. Firstly, one control method adopted in new nuclear power projects is introduced. Then based on this, an optimized method is raised. The new method mainly concludes two points than the adopted method: 1. The concept 'local control mode' is introduced into the signal priority logic modules, and the priority logic module turns into local mode for the non-1E control system once it accepts safety signal; 2. The 'remote control mode' is added into the module of the safety actuator in the non-1E control system, and this can make the non-1E control system abandon controlling the safety actuator when the relevant priority logic module accept the safety signal. Based on verifying the correctness of modified scheme, comparisons between the fore-and-aft schemes are provided to summary the merits of the optimized method. It is concluded that optimized scheme is better in the aspects of reliability, safety and economy. (authors)

  4. OFFICER AND COMMANDER IN ASYMMETRIC WARFARE OPERATIONS

    Directory of Open Access Journals (Sweden)

    Giuseppe CAFORIO

    2013-01-01

    Full Text Available Starting from the data of a field research conducted among soldiers with asymmetric warfare experiences from nine different countries, the author seeks to identify and shed light on the various problems that officers with command responsibilities had to face during their missions. A picture emerges of feelings and experiences relating to their first impression upon arriving in the theatre, relations with local armed forces, relations with the local population and local authorities, relations with NGOs, relations with other armies, the impact of the rules of engagement (ROEs, training and education, and operational experiences. The paper ends with a discussion of the lessons learned.

  5. Incident Command System - Environmental Unit responsibilities

    International Nuclear Information System (INIS)

    Hillman, S. O.

    1997-01-01

    The Incident Command System (ICS) for crisis management, used for response to oil spills by the Alyeska Pipeline Service Company throughout its facilities, including the Trans Alaska Pipeline and the Valdez Marine Terminal, was described. Special attention was given to the Environmental Unit within the ICS which functions as a primary support unit for the Incident Operations Section. Details of the Unit's function were provided. These include the collection, evaluation and dissemination of information on all environmental issues concerning the crisis, provision of advice and direction on environmental aspects, and up-front agency interaction. A checklist of tasks is included. 7 refs

  6. Spaceport Command and Control System Automation Testing

    Science.gov (United States)

    Hwang, Andrew

    2017-01-01

    The Spaceport Command and Control System (SCCS) is the National Aeronautics and Space Administrations (NASA) launch control system for the Orion capsule and Space Launch System, the next generation manned rocket currently in development. This large system requires high quality testing that will properly measure the capabilities of the system. Automating the test procedures would save the project time and money. Therefore, the Electrical Engineering Division at Kennedy Space Center (KSC) has recruited interns for the past two years to work alongside full-time engineers to develop these automated tests, as well as innovate upon the current automation process.

  7. 24 Command Fire Improvement Action Program Plan

    International Nuclear Information System (INIS)

    GRIFFIN, G.B.

    2000-01-01

    Fluor Hanford (FH) is responsible for providing support to the Department of Energy Richland Operations Office (RL) in the implementation of the Hanford Emergency Preparedness (EP) program. During fiscal year 2000, a number of program improvements were identified from various sources including a major range fire (24 Command Fire). Evaluations of the emergency preparedness program have confirmed that it currently meets all requirements and that performance of personnel involved is good, however the desire to effect continuous improvement resulted in the development of this improvement program plan. This program plan defines the activities that will be performed in order to achieve the desired performance improvements

  8. Spaceport Command and Control System Automation Testing

    Science.gov (United States)

    Plano, Tom

    2017-01-01

    The goal of automated testing is to create and maintain a cohesive infrastructure of robust tests that could be run independently on a software package in its entirety. To that end, the Spaceport Command and Control System (SCCS) project at the National Aeronautics and Space Administration's (NASA) Kennedy Space Center (KSC) has brought in a large group of interns to work side-by-side with full time employees to do just this work. Thus, our job is to implement the tests that will put SCCS through its paces.

  9. Spaceport Command and Control System Automated Testing

    Science.gov (United States)

    Stein, Meriel

    2017-01-01

    The Spaceport Command and Control System (SCCS) is the National Aeronautics and Space Administrations (NASA) launch control system for the Orion capsule and Space Launch System, the next generation manned rocket currently in development. This large system requires high quality testing that will properly measure the capabilities of the system. Automating the test procedures would save the project time and money. Therefore, the Electrical Engineering Division at Kennedy Space Center (KSC) has recruited interns for the past two years to work alongside full-time engineers to develop these automated tests, as well as innovate upon the current automation process.

  10. Command Disaggregation Attack and Mitigation in Industrial Internet of Things

    Directory of Open Access Journals (Sweden)

    Peng Xun

    2017-10-01

    Full Text Available A cyber-physical attack in the industrial Internet of Things can cause severe damage to physical system. In this paper, we focus on the command disaggregation attack, wherein attackers modify disaggregated commands by intruding command aggregators like programmable logic controllers, and then maliciously manipulate the physical process. It is necessary to investigate these attacks, analyze their impact on the physical process, and seek effective detection mechanisms. We depict two different types of command disaggregation attack modes: (1 the command sequence is disordered and (2 disaggregated sub-commands are allocated to wrong actuators. We describe three attack models to implement these modes with going undetected by existing detection methods. A novel and effective framework is provided to detect command disaggregation attacks. The framework utilizes the correlations among two-tier command sequences, including commands from the output of central controller and sub-commands from the input of actuators, to detect attacks before disruptions occur. We have designed components of the framework and explain how to mine and use these correlations to detect attacks. We present two case studies to validate different levels of impact from various attack models and the effectiveness of the detection framework. Finally, we discuss how to enhance the detection framework.

  11. Command Disaggregation Attack and Mitigation in Industrial Internet of Things.

    Science.gov (United States)

    Xun, Peng; Zhu, Pei-Dong; Hu, Yi-Fan; Cui, Peng-Shuai; Zhang, Yan

    2017-10-21

    A cyber-physical attack in the industrial Internet of Things can cause severe damage to physical system. In this paper, we focus on the command disaggregation attack, wherein attackers modify disaggregated commands by intruding command aggregators like programmable logic controllers, and then maliciously manipulate the physical process. It is necessary to investigate these attacks, analyze their impact on the physical process, and seek effective detection mechanisms. We depict two different types of command disaggregation attack modes: (1) the command sequence is disordered and (2) disaggregated sub-commands are allocated to wrong actuators. We describe three attack models to implement these modes with going undetected by existing detection methods. A novel and effective framework is provided to detect command disaggregation attacks. The framework utilizes the correlations among two-tier command sequences, including commands from the output of central controller and sub-commands from the input of actuators, to detect attacks before disruptions occur. We have designed components of the framework and explain how to mine and use these correlations to detect attacks. We present two case studies to validate different levels of impact from various attack models and the effectiveness of the detection framework. Finally, we discuss how to enhance the detection framework.

  12. Comparison and statistical analysis of long-term overheating indices applied on energy renovated dwellings in temperate climates

    DEFF Research Database (Denmark)

    Psomas, Theofanis Ch.; Heiselberg, Per Kvols; Duer, Karsten

    2018-01-01

    -running’ representative dwellings and characteristic climatic conditions of central Europe (Denmark, United Kingdom, Austria and France). Different renovation steps and passive cooling strategies were applied on these case studies creating 66 variants for comfort assessment. The analyses were conducted with the use...

  13. Renovation of a Mechanical Engineering Senior Design Class to an Industry-Tied and Team-Oriented Course

    Science.gov (United States)

    Liu, Yucheng

    2017-01-01

    In this work, an industry-based and team-oriented education model was established based on a traditional mechanical engineering (ME) senior design class in order to better prepare future engineers and leaders so as to meet the increasing demand for high-quality engineering graduates. In the renovated curriculum, industry-sponsored projects became…

  14. Desarrollo e implantación de energías renovables: situación actual y tendencias

    OpenAIRE

    Picó Heras, Sergio

    2002-01-01

    En esta tesina se tratarán las posibilidades que ofrecen las energías renovables com base de una planificicación energética. El tema se enfocará tanto desde puntos de vista económicos, ambientales, técnicos, políticos, etc

  15. Command Structure for Theater Warfare: The Quest for Unity of Command

    Science.gov (United States)

    1984-09-01

    that trryfari tail forth thr htst from iti—Btturki Major General« Pern M Smith. USAF. and Hark) A Hughe«. USAF. contributed more to the rndertaking...an air. ground, and sea component. These arc generic commands which control all combat operations in the media of the air. ground, and sea. There

  16. LMHC/TWRS year 2000 equipment project renovation and contingency plan

    International Nuclear Information System (INIS)

    ADAMS, M.R.

    1999-01-01

    A program has been completed to assess, renovate and document tank farm field equipment year 2000 compliance. A communication plan has also been prepared (see section 8.0). The objective of the program was to assure that no adverse effects occur in tank farm operations as a result of equipment malfunction due to the advent of year 2000. The purposes of this document are to: describe the process used to assess field equipment; document items found to be compliant; document items found to be non-compliant including options for making the equipment year 2000 functional and/or tolerant; describe location and management of field equipment year 2000 documentation; assess overall vulnerability of TWRS field equipment with regard to year 2000 problems and describe plans to communicate year 2000 equipment review results and corrective actions

  17. Experiment research of slag renovation in the corner-fired boiler

    Energy Technology Data Exchange (ETDEWEB)

    Gong, Zhijun; Wu, Wenfei [Inner Mongolia Univ. of Science and Technology, Baotou (China). School of Energy and Environment

    2013-07-01

    Aiming at serious slag on the water wall around the burner of corner-fired boiler with low-ash-fusion-point coal, cold experimental model has been established. In this experiment, particle image velocimetry (PIV) has been employed to accurately measure aerodynamic field of burner region, and the experimental research of furnace slag renovation has been conducted through changing the burner jet arrangement. The experiment results show that it has significantly effect on aerodynamic field in the furnace by changing burner jet deflection angle. A reasonable actual tangential circle diameter can be formed through adjusting the burner jet deflection angle, to prevent primary air attacking the wall, and further more, to effectively prevent serious slag on the water wall around the burner.

  18. French practice of the renovation of I and C systems in 900 MW NPP's

    International Nuclear Information System (INIS)

    Dall'agnol, A.

    1998-01-01

    From 1993 to 1995, EDF led I and C renovation studies. These studies aimed at identifying the I and C components which were not able to be kept in operation up to the 3 rd ten year outage and to propose adequate solutions in consequence. Both technical and economic aspects have been dealt with. An Observation Phase gave the necessary elements for decisions on obsolescence and ageing of equipment. Basis Preliminary Studies were intended to propose solutions for the replacement of equipment that would not fulfill the criterion. The project concluded that the major parts of I and C components were in good working order and a very few of them needed further studies. (author)

  19. Renovated Korean nuclear safety and security system: A review and suggestions to successful settlement

    Energy Technology Data Exchange (ETDEWEB)

    Chung, W. S.; Yun, S. W.; Lee, D. S. [Korea Atomic Energy Research Inst., Dukjin-dong 150, Yusung-gu, Daejon, R.O., 305-353 (Korea, Republic of); Go, D. Y. [Kyung Hee Univ., Kyung Hee daero 26, Dongdaemoon-gu, Seoul, R.O., 130-701 (Korea, Republic of)

    2012-07-01

    Questions of whether past nuclear regulatory body of Korea is not a proper system to monitor and check the country's nuclear energy policy and utilization have been raised. Moreover, a feeling of insecurity regarding nuclear safety after the nuclear accident in Japan has spread across the public. This has stimulated a renovation of the nuclear safety regime in Korea. The Nuclear Safety and Security Commission (NSSC) was launched on October 26, 2011 as a regulatory body directly under the President in charge of strengthening independence and nuclear safety. This was a meaningful event as the NSSC it is a much more independent regulatory system for Korea. However, the NSSC itself does not guarantee an enhanced public acceptance of the nuclear policy and stable use nuclear energy. This study introduces the new NSSC system and its details in terms of organization structure, appropriateness of specialty, budget stability, and management system. (authors)

  20. ECO-TECHNIQUE OF SEWER RENOVATION USING COMPOSITE SHELLS: STRUCTURAL ANALYSIS

    Directory of Open Access Journals (Sweden)

    B. Attaf

    2015-07-01

    Full Text Available An eco-technical renovation of the sewage system is developed in this paper; this technique involves incorporating into the existing sewer a series of jointed prefabricated sandwich or composite shells. The purpose of his study is to determine the structural shell deflection, the high displacement areas and to validate the non-failure criterion for each ply constituting the inner and outer laminate facings. The numerical results were obtained at low cost by using the finite element method. Studies have focused on structural analysis of a typical shell unit with an ovoid form (egg-shaped section when it is subjected, during annular space filling operation, to pressure forces generated by wet concrete. To ensure the safety of the composite shell structure, Tsai-Hill criterion function is applied and results are presented for the most stressed plies

  1. Administración regional de los recursos naturales renovables. Corporaciones autónomas regionales

    Directory of Open Access Journals (Sweden)

    Hugues Manuel Lacouture Daníes

    2006-01-01

    Full Text Available En Colombia, los Recursos Naturales Renovables son propiedad de la Nación, y su administración corresponde en el nivel regional a las Autoridades Ambientales mediante acciones y procedimientos que van desde el otorgamiento de autorizaciones, concesiones, licencias y/o permisos hasta la imposición de sanciones por el incumplimiento de la normatividad ambiental. Este trabajo aporta herramientas para la comprensión del ejercicio misional de las Corporaciones Autónomas Regionales, a partir del licenciamiento ambiental, la concesión de aguas para su uso y aprovechamiento y el permiso de emisiones atmosféricas; así mismo, describe las funciones de control y seguimiento ambiental y el ejercicio de la facultad coercitiva de estas entidades

  2. Discussion on anti-flood renovation of operational nuclear power plants

    International Nuclear Information System (INIS)

    Chen Jiangang; Chen Haiqiao; Zhang Lihan; Wang Sen; Liu Shifeng

    2014-01-01

    The design of nuclear power plants on anti-flood performance was only based on design basis condition in China. The Fukushima nuclear accident revealed the possibility of suffering flood under beyond design basis condition, which caused the continuously deterioration of Fukushima nuclear accident. After the accident, China national nuclear safety regulators proposed new requirements on performance of anti-flood of nuclear power plants. Then, Qinshan Phase II carried out research of anti-flood technology. This paper introduced the background, research and development of anti-flood renovation technology for important safety buildings of Qinshan Phase II, and discussed the necessary for improvement of anti-flood capacity of nuclear power plants and relative measures in China, which is helpful to improve anti-flood performance of operational nuclear power plants and nuclear power plants under construction. (authors)

  3. Identification of key parameters determining Danish homeowners' willingness and motivation for energy renovations

    DEFF Research Database (Denmark)

    Mortensen, Andrea; Heiselberg, Per Kvols; Knudstrup, Mary-Ann

    2016-01-01

    that the average Danish single-family house owner can be motivated by improvements in comfort, indoor environment and architecture combined with a reasonable economy. The objective of this paper is, based on the motivation survey results, to determine if all homeowners can be assumed as one homogeneous group...... or if there are significant differences among the homeowners, what causes these differences and how does this affect the future motivation strategy. The key parameters for if and how the homeowner can be motivated are related to the homeowner’s position in life: age, children’s’ age, time of ownership, occupation and income....... Furthermore, the results conclude that the homeowners cannot be assumed as one group, but must be seen as individuals. Those who are most likely to be motivated to perform an energy renovation are the younger generation of homeowners. The older generation will be harder to motivate, but results nonetheless...

  4. Gordailu and pedagogic renovation in the Basque Country. Politics and education during the late francoism

    Directory of Open Access Journals (Sweden)

    Ander DELGADO CENDAGORTAGALARZA

    2017-12-01

    Full Text Available This article analyses the educative and pedagogical renovation proposals situated in their social and economic context. Thus, it intends to obtain a wider vision of the problems or helps these proposals may have when it comes to their application in schools. It will be of major consideration to differentiate within these proposals the aspects related with classroom management from other approaches related with the goals to transform the society through a reformed education, that sometimes appear inside them, to understand better their social reception. This article is centred on the research of proposals based on the ideas Paulo Freire tried to introduce in the ikastola or Basque schools in the seventies of the last Century in the Basque Country and the problems they found when their application was intended.

  5. Development of energy renovation packages for Danish residential single family houses - parcel houses

    DEFF Research Database (Denmark)

    Pomianowski, Michal Zbigniew; Antonov, Yovko Ivanov; Heiselberg, Per Kvols

    Work presented in this technical report was developed as a port of Horizon 2020 EU project REFURB. The number of deep energy retrofits is falling behind the EU ambitious targets. The REFURB project aims at finding technical and nontechnical solutions that would match demand and supply side......-selected homeowner target groups was based on (I) selection of dwelling segment with high impact and energy saving potential. (II)Sequenced approach in creating package solutions. (III)Compelling offer to be proposed with specific timing. This report focuses mainly on the second listed component, namely, development...... of the residential building renovation market. Due to the multiple significant differences at the national level, compelling offers were developed specifically for each country participant. This report elaborates only on Danish approach, as stated in [1], the Danish approach to create compelling offers for pre...

  6. Performance Evaluation and Improvement of a Newly-Renovated Danish School Building (Retro-commissioning)

    DEFF Research Database (Denmark)

    Liu, Li; Georgieva, Viktoriya Vasileva; Zabusova, Diana

    2017-01-01

    In this study, we analyse and evaluate the energy performance of a Danish school building 4 years after its renovation. The structure of the following paper follows four phases, which include Planning, Investigation, Implementation and Hand-off. In the Planning phase, the objectives of the retro...... commissioning are set based on the Owner’s Project Requirements. The Investigation phase aims to analyze how the building and its systems are performing in terms of energy use and indoor environmental quality. The Implementation phase includes dynamic building simulations, which target to analyze different...... solutions and their impact on the energy consumption and indoor environmental quality in the building. Description of the final solution for optimization is included in the conclusion (Hand-off phase) of this paper....

  7. Indoor air quality in a multifamily apartment building before and after energy renovation

    DEFF Research Database (Denmark)

    Bekö, Gabriel; Földváry, Veronika; Langer, Sarka

    2016-01-01

    Buildings are responsible for a substantial portion of global energy consumption. Most of the multifamily residential buildings in central Europe built in the 20th century do not satisfy the current requirements on energy efficiency. Nationwide remedial measures are taken to improve the energy ef...... exchange rates and acceptable and healthy IAQ. Without these considerations, energy reconstruction can adversely affect the quality of the indoor environment....... efficiency of these buildings and reduce their energy consumption. Since the impact of these measures on the indoor air quality is rarely considered, they often compromise indoor air quality due to decreased ventilation and infiltration rate. We compared the indoor air quality in a multifamily apartment...... building in Slovakia before and after energy renovation, during two subsequent winters. Measurements of temperature, relative humidity, concentrations of CO2, formaldehyde, NO2, and volatile organic compounds were performed during one week in January 2015 in 20 apartments in one multifamily building...

  8. PRACTICING FACADE RENOVATION OF DANISH BUILDINGS BUILT BETWEEN 1960 AND 1980

    DEFF Research Database (Denmark)

    Hannoudi, Loay Akram; Lauring, Gert Michael; Christensen, Jørgen Erik

    Practising building facade renovation in Denmark, both from the technical and aesthetic points of view, raises many questions that are presented in this paper. These questions are answered and discussed through interviews conducted with seven architectural firms that are involved with façade...... the interviewees. These questions focused on technical, aesthetic, functional, economic and environmental aspects. The results of the interviews show that there are many problems facing these buildings, for example, energy efficiency, durability and indoor climate problems. The process of treating these problems...... on in the interviews. The interviews with the architectural firms were able to answer the questions regarding the building owners’ concerns and showed the way the architectural firms either reacted to these concerns to provide concepts and strategies like external re-insulation, or followed a specific process...

  9. Chemical exposures in recently renovated low-income housing: Influence of building materials and occupant activities.

    Science.gov (United States)

    Dodson, Robin E; Udesky, Julia O; Colton, Meryl D; McCauley, Martha; Camann, David E; Yau, Alice Y; Adamkiewicz, Gary; Rudel, Ruthann A

    2017-12-01

    Health disparities in low-income communities may be linked to residential exposures to chemicals infiltrating from the outdoors and characteristics of and sources in the home. Indoor sources comprise those introduced by the occupant as well as releases from building materials. To examine the impact of renovation on indoor pollutants levels and to classify chemicals by predominant indoor sources, we collected indoor air and surface wipes from newly renovated "green" low-income housing units in Boston before and after occupancy. We targeted nearly 100 semivolatile organic compounds (SVOCs) and volatile organic compounds (VOCs), including phthalates, flame retardants, fragrance chemicals, pesticides, antimicrobials, petroleum chemicals, chlorinated solvents, and formaldehyde, as well as particulate matter. All homes had indoor air concentrations that exceeded available risk-based screening levels for at least one chemical. We categorized chemicals as primarily influenced by the occupant or as having building-related sources. While building-related chemicals observed in this study may be specific to the particular housing development, occupant-related findings might be generalizable to similar communities. Among 58 detected chemicals, we distinguished 25 as primarily occupant-related, including fragrance chemicals 6-acetyl-1,1,2,4,4,7-hexamethyltetralin (AHTN) and 1,3,4,6,7,8-hexahydro-4,6,6,7,8,8-hexamethylcyclopenta[g]-2-benzopyran (HHCB). The pre- to post-occupancy patterns of the remaining chemicals suggested important contributions from building materials for some, including dibutyl phthalate and xylene, whereas others, such as diethyl phthalate and formaldehyde, appeared to have both building and occupant sources. Chemical classification by source informs multi-level exposure reduction strategies in low-income housing. Copyright © 2017 The Authors. Published by Elsevier Ltd.. All rights reserved.

  10. Barriers and Potential Solutions for Energy Renovation of Buildings in Denmark

    Directory of Open Access Journals (Sweden)

    Niels I. Meyer

    2014-02-01

    Full Text Available Buildings account for a substantial part of the total energy consumption. In Denmark this number is about 40 % and this is approximately the same in most industrial countries. On this background there is an urgent need to develop strategies for reducing the energy demand in the building sector. Renovation of existing buildings must have high priority as houses often last for 50 to 100 years, while the time perspective for the desired transformation to low-energy houses is less than 30 years in order to mitigate global warming and avoid irreversible tipping-points. The only sustainable energy supply in the perspective of centuries is renewable energy provided by the sun and exploited in the form of solar heat, solar electricity (PVs, wind power, hydropower, wave power, and some types of biomass etc. A future dominating role of intermittent renewable sources requires new integrated systems thinking on both the supply and demand side for heat, electricity and transport. Implementing such Smart Energy Systems requires integrated strategic energy planning on the national and local level. With the fundamental changes in the energy supply technologies expected during the coming years, it is important to synchronize investments in energy conservation measures with investments in the supply side, in order to avoid overinvestment in supply systems and thus to minimize the total costs of the transformation to Smart Energy Systems. This paper highlights some of the most important barriers for renovation of existing buildings in Denmark and points to policies for overcoming these barriers. Some of the policies have been presented in the reports of a recent Danish research project (CEESA

  11. Propriedades físicas e químicas de substratos renováveis

    Directory of Open Access Journals (Sweden)

    Dagma Kratz

    2013-12-01

    Full Text Available A necessidade premente de aumento no número de mudas plantadas anualmente, bem como a crescente diminuição na disponibilidade de matérias-primas tradicionais para composição de substratos, tem levado à necessidade do desenvolvimento de estudos que visam à avaliação e disponibilização de novos materiais para sua composição técnica e economicamente eficientes. Em vista disso, este estudo objetivou analisar as propriedades físicas e químicas de substratos formulados com base em materiais renováveis e de grande disponibilidade (fibra de coco, casca de arroz carbonizada em diferentes granulometrias, biossólido e casca de pinus semidecomposta, bem como suas intercorrelações. Para tanto, foram formulados 41 substratos, os quais tiveram suas propriedades físicas e químicas avaliadas. Com base nos resultados, pôde-se concluir que, pelas suas propriedades físicas e químicas, uma série de materiais renováveis e, ou, resíduos agroindustriais e humanos se adéquam para serem utilizados como componentes na formulação de substratos para produção de mudas florestais, embora os conteúdos de alguns nutrientes em determinados substratos devam ser ajustados via adubação de base. Em vista do fato de as propriedades físicas serem mais decisivas na escolha de determinada formulação de substrato, entre os componentes e misturas avaliadas se pode concluir que os substratos formulados à base de fibra de coco e casca de arroz carbonizada se mostraram mais adequados.

  12. Energy Efficiency and Universal Design in Home Renovations - A Comparative Review.

    Science.gov (United States)

    Kapedani, Ermal; Herssens, Jasmien; Verbeeck, Griet

    2016-01-01

    Policy and societal objectives indicate a large need for housing renovations that both accommodate lifelong living and significantly increase energy efficiency. However, these two areas of research are not yet examined in conjunction and this paper hypothesizes this as a missed opportunity to create better renovation concepts. The paper outlines a comparative review on research in Energy Efficiency and Universal Design in order to find the similarities and differences in both depth and breadth of knowledge. Scientific literature in the two fields reveals a disparate depth of knowledge in areas of theory, research approach, and degree of implementation in society. Universal Design and Energy Efficiency are part of a trajectory of expanding scope towards greater sustainability and, although social urgency has been a driver of the research intensity and approach in both fields, in energy efficiency there is an engineering, problem solving approach while Universal Design has a more sociological, user-focused one. These different approaches are reflected in the way home owners in Energy Efficiency research are viewed as consumers and decision makers whose drivers are studied, while Universal Design treats home owners as informants in the design process and studies their needs. There is an inherent difficulty in directly merging Universal Design and Energy Efficiency at a conceptual level because Energy Efficiency is understood as a set of measures, i.e. a product, while Universal Design is part of a (design) process. The conceptual difference is apparent in their implementation as well. Internationally energy efficiency in housing has been largely imposed through legislation, while legislation directly mandating Universal Design is either non-existent or it has an explicit focus on accessibility. However, Energy Efficiency and Universal Design can be complementary concepts and, even though it is more complex than expected, the combination offers possibilities to advance

  13. Engagement Skills Trainer: The Commander’s Perspective

    Science.gov (United States)

    2017-06-09

    CBRN Chemical Biological Radiological and Nuclear CGSOC Command and General Staff Officers Course DMG Digital Master Gunner EST Engagement Skills...commanders always emphasized SHARP ( Sexual Harassment and Response Program) training, the battery commander may vividly recall those events but not the range...soldiers in the EST generally do worse at weapons safety and orientation .26 Indicators from research show that EST results predict live fire results. The

  14. Command vector memory systems: high performance at low cost

    OpenAIRE

    Corbal San Adrián, Jesús; Espasa Sans, Roger; Valero Cortés, Mateo

    1998-01-01

    The focus of this paper is on designing both a low cost and high performance, high bandwidth vector memory system that takes advantage of modern commodity SDRAM memory chips. To successfully extract the full bandwidth from SDRAM parts, we propose a new memory system organization based on sending commands to the memory system as opposed to sending individual addresses. A command specifies, in a few bytes, a request for multiple independent memory words. A command is similar to a burst found in...

  15. XTCE: XML Telemetry and Command Exchange Tutorial, XTCE Version 1

    Science.gov (United States)

    Rice, Kevin; Kizzort, Brad

    2008-01-01

    These presentation slides are a tutorial on XML Telemetry and Command Exchange (XTCE). The goal of XTCE is to provide an industry standard mechanism for describing telemetry and command streams (particularly from satellites.) it wiill lower cost and increase validation over traditional formats, and support exchange or native format.XCTE is designed to describe bit streams, that are typical of telemetry and command in the historic space domain.

  16. Five Apollo astronauts with Lunar Module at ASVC prior to grand opening

    Science.gov (United States)

    1997-01-01

    Some of the former Apollo program astronauts observe a Lunar Module and Moon mockup during a tour the new Apollo/Saturn V Center (ASVC) at KSC prior to the gala grand opening ceremony for the facility that was held Jan. 8, 1997. The astronauts were invited to participate in the event, which also featured NASA Administrator Dan Goldin and KSC Director Jay Honeycutt. Some of the visiting astonauts were (from left): Apollo 10 Lunar Module Pilot and Apollo 17 Commander Eugene A. Cernan; Apollo 9 Lunar Module Pilot Russell L. Schweikart; Apollo 10 Command Module Pilot and Apollo 16 Commander John W. Young; Apollo 10 Commander Thomas P. Stafford; and Apollo 11 Lunar Module Pilot Edwin E. 'Buzz' Aldrin, Jr. The ASVC also features several other Apollo program spacecraft components, multimedia presentations and a simulated Apollo/Saturn V liftoff. The facility will be a part of the KSC bus tour that embarks from the KSC Visitor Center.

  17. Terrain Commander: Unattended Ground-Based Surveillance System

    National Research Council Canada - National Science Library

    Steadman, Bob

    2000-01-01

    .... Terrain Commander OASIS provides next generation target detection, classification, and tracking through smart sensor fusion of beamforming acoustic, seismic, passive infrared, and magnetic sensors...

  18. Deductive Sensemaking Principles Using Personal Constructs of the Field Commanders

    National Research Council Canada - National Science Library

    Ntuen, Celestine A; Leedom, Dennis

    2007-01-01

    .... It is assumed that the expert commander constructs diverse and asynchronous sensemaking models when confronted with asymmetric situations-evolving and changing dynamics of the battlefield information...

  19. Contractor Support on the Battlefield -- Increased Reliance Requires Commander's Attention

    National Research Council Canada - National Science Library

    Maloney, Kathy J

    2006-01-01

    .... Department of Defense initiatives to adopt a leaner business strategy, increase efficiency, and reduce expenditures have exposed the battlefield commander to additional operational risk centered...

  20. U.S. Special Operations Command Training and Education Program

    National Research Council Canada - National Science Library

    Gimble, Thomas

    1996-01-01

    .... Special Operations Command (USCINCSOC), to train assigned forces to meet special operations mission taskings and to ensure interoperability with conventional forces and other special operations forces (SOF...

  1. Human Systems Integration Assessment of Network Centric Command and Control

    National Research Council Canada - National Science Library

    Quashnock, Dee; Kelly, Richard T; Dunaway, John; Smillie, Robert J

    2004-01-01

    .... FORCEnet is the operational construct and architectural framework for Naval Network Centric Warfare in the information age that integrates warriors, sensors, networks, command and control, platforms...

  2. When Contractors Deploy: A Guide for the Operational Commander

    National Research Council Canada - National Science Library

    Buhler, Carl

    2000-01-01

    .... Furthermore, this paper also lists four recommendations for operational commanders and the military on how to better integrate contractors into the military effort, especially during hostile combat situations...

  3. Conceptual design report: Nuclear materials storage facility renovation. Part 5, Structural/seismic investigation. Section B, Renovation calculations/supporting data

    International Nuclear Information System (INIS)

    1995-01-01

    The Nuclear Materials Storage Facility (NMSF) at the Los Alamos National Laboratory (LANL) was a Fiscal Year (FY) 1984 line-item project completed in 1987 that has never been operated because of major design and construction deficiencies. This renovation project, which will correct those deficiencies and allow operation of the facility, is proposed as an FY 97 line item. The mission of the project is to provide centralized intermediate and long-term storage of special nuclear materials (SNM) associated with defined LANL programmatic missions and to establish a centralized SNM shipping and receiving location for Technical Area (TA)-55 at LANL. Based on current projections, existing storage space for SNM at other locations at LANL will be loaded to capacity by approximately 2002. This will adversely affect LANUs ability to meet its mission requirements in the future. The affected missions include LANL's weapons research, development, and testing (WRD ampersand T) program; special materials recovery; stockpile survelliance/evaluation; advanced fuels and heat sources development and production; and safe, secure storage of existing nuclear materials inventories. The problem is further exacerbated by LANL's inability to ship any materials offsite because of the lack of receiver sites for mate rial and regulatory issues. Correction of the current deficiencies and enhancement of the facility will provide centralized storage close to a nuclear materials processing facility. The project will enable long-term, cost-effective storage in a secure environment with reduced radiation exposure to workers, and eliminate potential exposures to the public. This report is organized according to the sections and subsections. It is organized into seven parts. This document, Part V, Section B - Structural/Seismic Information provides a description of the seismic and structural analyses performed on the NMSF and their results

  4. Bunch identification module

    International Nuclear Information System (INIS)

    Fox, J.D.

    1981-01-01

    This module provides bunch identification and timing signals for the PEP Interaction areas. Timing information is referenced to the PEP master oscillator, and adjusted in phase as a function of region. Identification signals are generated in a manner that allows observers in all interaction regions to agree on an unambiguous bunch identity. The module provides bunch identification signals via NIM level logic, upon CAMAC command, and through LED indicators. A front panel ''region select'' switch allows the same module to be used in all regions. The module has two modes of operation: a bunch identification mode and a calibration mode. In the identification mode, signals indicate which of the three bunches of electrons and positrons are interacting, and timing information about beam crossing is provided. The calibration mode is provided to assist experimenters making time of flight measurements. In the calibration mode, three distinct gating signals are referenced to a selected bunch, allowing three timing systems to be calibrated against a common standard. Physically, the bunch identifier is constructed as a single width CAMAC module. 2 figs., 1 tab

  5. Commande adaptive d'une machine asynchrone

    Science.gov (United States)

    Slama-Belkhodja, I.; de Fornel, B.

    1996-06-01

    The paper deals with an indirect self-tuning speed control for an induction motor supplied by a chopper-filter-inverter system. Input/Output models are identified with the recursive least squares algorithm and the controller adaptation is based on a pole assignement strategy. Emphasis is put on the evaluation of the parameter identification in order to avoid instabilities because of disturbances or insufficient excitations. This is especially of importance when the adaptive control is carried out in closed loop systems and without additional test signals. Simulation results show the improvement of the dynamic responses and the robustness against load variations or parameters variations (rotor resistance, inertia). Cat article décrit une stratégie de commande adaptive indirecte à Placement de Pôles (PP), appliquée à la commande en vitesse d'une machine asynchrone alimentée par un ensemble hacheur-filtre-onduleur de tension. L'algorithme des Moindres Carrés Récursifs (MCR) est utilisé pour l'identification des modèles de comportement type entrées/sorties. Un intérêt particulier est porté à la mise en oeuvre de cet algorithme et à la discussion de ses résultats, tenant compte des erreurs de modélisation et de la nature peu riche en excitations des entrées du processus. Différents régimes transitoires ont été simulés pour apprécier l'apport de cette association (MCR-PP) : démarrages et inversion des sens de rotation, à vide et en charges, applications d'échelons de couple résistant, variations paramétriques. Les résultats permettent d'illustrer, tant au niveau des performances que de la robustesse, l'apport d'une telle commande adaptive pour des entraînements électriques avec une machine asynchrone.

  6. Gobernanza global y evolución de las energías renovables en el sur. Objetivos políticos y estructuras de gobernanza

    OpenAIRE

    Wolfgang Hein; Daniela García Sánchez; Lars Holstenkamp

    2013-01-01

    El desarrollo de la gobernanza global de las energías renovables comparte similitudes y diferencias con otros sectores de la gobernanza global. La proliferación de organizaciones en el sector resalta el importante compromiso de varios actores con el fomento de energías renovables y, por otro lado, produce problemas de coordinación para alcanzar un efecto óptimo e influir sobre el avance de las energías renovables, particularmente en países en desarrollo.

  7. Gobernanza global y evolución de las energías renovables en el sur. Objetivos políticos y estructuras de gobernanza

    Directory of Open Access Journals (Sweden)

    Wolfgang Hein

    2013-10-01

    Full Text Available El desarrollo de la gobernanza global de las energías renovables comparte similitudes y diferencias con otros sectores de la gobernanza global. La proliferación de organizaciones en el sector resalta el importante compromiso de varios actores con el fomento de energías renovables y, por otro lado, produce problemas de coordinación para alcanzar un efecto óptimo e influir sobre el avance de las energías renovables, particularmente en países en desarrollo.

  8. Post-Soviet nuclear command and security

    International Nuclear Information System (INIS)

    Garwin, R.L.

    1992-01-01

    Traditionally, any nuclear command system must reckon with conflicting requirements. The system must ensure that weapons will be launched reliably when ordered, a goal known as positive control. But negative control, ensuring that the weapons will not be used without an authentic order, is also essential. These goals are often in tension; steps to make it more difficult to launch without authorization can make it less certain that weapons will be launched when desired, and vice versa. The balance struck between the two naturally shifts, with increased emphasis on negative control in peacetime, and on positive control in a major crisis. Under present circumstances, with virtually no threat of deliberate nuclear attack, both the US and Russia should be putting their emphasis overwhelmingly on ensuring negative control

  9. RENOVE: an organization net for the third sector promoting the development of the renewable sources in Brazil; RENOVE: uma rede de organizacoes do terceiro setor promovendo o desenvolvimento das fontes renovaveis no Brasil

    Energy Technology Data Exchange (ETDEWEB)

    Ribeiro, Claudio Moises; Souza, Aurelio Andrade de [Winrock International Brasil, Salvador, BA (Brazil)]. E-mail: cribeiro@winrock.org.br; Rosa, Fabio Luis de Oliveira [RENOVE - Rede Nacional das Organizacoes da Sociedade Civil para as Energias Renovaveis, Porto Alegre RS (Brazil). Secretaria Executiva]. E-mail: fabrosa@plug-in.com.br

    2002-07-01

    The National Network of Civil Society Organizations for Renewable Energy RENOVE was founded in Brazil on June 17th, 2000, to promote the use and application of renewable energy in production and integrated activities, especially in isolated rural areas, environmental protection areas and their surroundings. The network is formed of sixteen founding members. It promotes integration activities among the members, and is currently preparing to participate in the process of universalization of electricity services in Brazil. RENOVE is now implementing its Executive Secretary to optimize and carry out its actions. Cooperation between members has already lead to joint renewable energy application projects and training initiatives besides declarations in support of the development of a national renewable energy policy. (author)

  10. Is There a Need For a Joint Reserve Components Command?

    Science.gov (United States)

    2013-03-01

    Bravo Zulu ”. If these words were heard by a Soldier, it might be interpreted as poor performance. By having one organization as a single source for...Commander, Joint Reserve Components Command. Creation of the JRCC would, in time, strengthen partnerships between the reserve components of each

  11. COMMAND-AND-CONTROL AND MANAGEMENT DECISION MAKING,

    Science.gov (United States)

    Reports that the development of command-and-con trol systems in support of decision making and action taking has been accomplished by military...methods applicable to management systems. Concludes that the command-and-control type system for top management decision making is a man-machine system having as its core an on going, dynamic operation. (Author)

  12. The use of augmented reality in command and control situation ...

    African Journals Online (AJOL)

    This study identifies possible uses of augmented reality in command and control applications with specific attention to situation awareness in the South African context. Applications across the different command and control functions, as well as at the different levels of military operations are considered. The article concludes ...

  13. 32 CFR 809a.10 - Military commanders' responsibilities.

    Science.gov (United States)

    2010-07-01

    ... authorities as soon as possible. (c) Military forces will ordinarily exercise police powers previously... 32 National Defense 6 2010-07-01 2010-07-01 false Military commanders' responsibilities. 809a.10... Disturbance Intervention and Disaster Assistance § 809a.10 Military commanders' responsibilities. (a...

  14. Army Aviation and the Mission Command Warfighting Function

    Science.gov (United States)

    2017-06-09

    information systems , processes and procedures, optimize facilities and equipment, and build understanding of the networks that link the headquarters...however further publication or sale of copyrighted images is not permissible. ii REPORT DOCUMENTATION PAGE Form Approved OMB No. 0704-0188...Command System , Mission Command Information Systems , Training, Mission Training Complex 16. SECURITY CLASSIFICATION OF: 17. LIMITATION OF ABSTRACT

  15. Fit for Command: Military Leadership Attributes for Small Wars

    Science.gov (United States)

    2013-04-18

    Corps Command and StaffCollege Marine Corps University 2076 outh Street Marine Corps Combat Development Command Quantico, Virgin ia?? 134-5068...by the local imam to join him in the celebration of a religious Shi’a holiday .79 Just before departure to the mosque his translator informed him

  16. Development and Validation of Nigerian Army Commanding Officers ...

    African Journals Online (AJOL)

    The research adopted an ex-post-facto design based on a qualitative and quantitative analysis of data. Focus Group Discussions (FGDs) and In-Depth Interviews (IDIs) were conducted with commanding officers. The FGDs were conducted with officers purposively drawn from incumbent commanding officers in the Nigerian ...

  17. Doublet III neutral beam multi-stream command language system

    International Nuclear Information System (INIS)

    Campbell, L.; Garcia, J.R.

    1983-01-01

    A multi-stream command language system was developed to provide control of the dual source neutral beam injectors on the Doublet III experiment at GA Technologies Inc. The Neutral Beam command language system consists of three parts: compiler, sequencer, and interactive task. The command language, which was derived from the Doublet III tokamak command language, POPS, is compiled, using a recursive descent compiler, into reverse polish notation instructions which then can be executed by the sequencer task. The interactive task accepts operator commands via a keyboard. The interactive task directs the operation of three input streams, creating commands which are then executed by the sequencer. The streams correspond to the two sources within a Doublet III neutral beam, plus an interactive stream. The sequencer multiplexes the execution of instructions from these three streams. The instructions include reads and writes to an operator terminal, arithmetic computations, intrinsic functions such as CAMAC input and output, and logical instructions. The neutral beam command language system was implemented using Modular Computer Systems (ModComp) Pascal and consists of two tasks running on a ModComp Classic IV computer. The two tasks, the interactive and the sequencer, run independently and communicate using shared memory regions. The compiler runs as an overlay to the interactive task when so directed by operator commands. The system is succesfully being used to operate the three neutral beams on Doublet III

  18. 14 CFR 417.303 - Command control system requirements.

    Science.gov (United States)

    2010-01-01

    ... system must transmit a command signal that has the radio frequency characteristics and power needed for.... (c) Reliability prediction. A command control system must have a predicted reliability of 0.999 at... for each launch. Any demonstration of the system's predicted reliability must satisfy § 417.309(b). (d...

  19. Warfighter Associate: Decision Aiding and Metrics for Mission Command

    Science.gov (United States)

    2012-01-23

    Distributions: highlights the Pareto Principle -- the top 20% of the mission-command staff is heavily involved in collaborations. • Our...developing “Command Web”, a web service to support thin- client functionality (Intelligent Presentation Services enables this) Thank you

  20. Turn-based gaming for convoy commander training

    NARCIS (Netherlands)

    Boonekamp, R.C.; Muller, T.J.; Vrijer, J.C. de

    2015-01-01

    With the increasing complexity of current-day military operations, effective education and training of military commanders is of vital importance. Commanders need to perform within a broader range of conflicts; unpredictable threats and civil-military interaction place a great demand on their

  1. Congressional Request for Audit of Contract F04699-91-C-0094 for Building Renovation at McClellan Air Force Base, California

    National Research Council Canada - National Science Library

    Steensma, David

    1993-01-01

    ...; that the Government did not properly disclose hazardous materials at a renovation site; and that the Government did not respond to requests for information related to this contract in accordance with the Freedom of In formation Act (FOIA...

  2. Delimitation and Classified Planning Management of Functional Renovation Zone: Experience of and Discussion on Shenzhen’s Practice of Urban Renewal

    Institute of Scientific and Technical Information of China (English)

    Hao; Wenxuan; Tong; De; Liu; Qing; Feng; Changchun

    2016-01-01

    Urban renewal is one of the important issues of urban development in China.Along with its development in the contemporary time,China has seen considerable achievements and problems as well in urban renewal.Taking into account that Shenzhen has carried out plenty of explorations on urban planning renewal,this paper takes it as an example to firstly analyze the plights of its urban renewal planning,the shortcomings of its urban renewal projects,and the advantages of functional renovation zones to manifest the necessity of the delimitation and classified planning management of functional renovation zone in urban renewal.It then summarizes the experience of its urban renewal unit planning in terms of the methods of zoning and implementation,and finally discusses the conceptual connotations of functional renovation zone,as well as the logic and characteristics of renovations of its delimitation and classified planning management,in hope of providing other Chinese cities with some references.

  3. Irrigation and crop management in Gandak Canal command of India

    International Nuclear Information System (INIS)

    Singh, S.S.; Khan, A.R.

    2002-05-01

    The Gandak Project is one of the biggest irrigation projects in India, covering a culturable command area (CCA) of 4.44 lakh ha in U.P., 9.6 lakh ha CCA in Bihar and 0.44 lakh ha in Nepal (Singh and Khan, 2002). The total culturable command areas are 14.44 lakh hectares. The command area is located in between latitude 25 deg 40' to 27 deg 25' and longitude between 83 deg 15' to 85 deg 15'. It is a diversion project through construction of a barrage on the river Gandak. This project area covers up to five districts in the Command of Tirhut Main Canal (TMC) and 3 districts in the Saran Main Canal (SMC) command. The length of main canal is usually long (990 and 650 R.D.'s in eastern and western side, respectively) and the channels are unlined and seepage loss is quite high. (author)

  4. Análisis económico y financiero de las empresas cotizadas pertenecientes al sector de las energías renovables

    OpenAIRE

    Rodríguez Regueiro, Luis Manuel

    2012-01-01

    Situados en este contexto, el objetivo de este Trabajo Fin de Master es ofrecer una visión del sector de las energías renovables, mediante el estudio de sus características y su funcionamiento, y analizar la situación económica y financiera que presentan las empresas cotizadas pertenecientes al sector de las energías renovables.

  5. Instalación eléctrica de una vivienda unifamiliar aislada mediante suministro de energías renovables

    OpenAIRE

    LOZANO VALLADOLID, FERNANDO

    2015-01-01

    [ES] Instalación eléctrica con grado de electrificación elevada de una vivienda unifamiliar aislada mediante suministro de energías renovables (solar, eólica, geotérmicas). Lozano Valladolid, F. (2015). Instalación eléctrica de una vivienda unifamiliar aislada mediante suministro de energías renovables. http://hdl.handle.net/10251/58751. TFGM

  6. Buildings move. The benefit of sustainable renovation of office buildings; Gebouwen bewegen. De winst van duurzame kantoorrenovatie

    Energy Technology Data Exchange (ETDEWEB)

    Van Miert, M. [Bureau Van Miert, Breda (Netherlands); De Ruiter, P. [Architectenbureau Paul de Ruiter, Amsterdam (Netherlands); Verburgt, P.

    2012-05-15

    Within the programme 'EnergieSprong' the development of the so-called Transition Formula was initiated that shows how existing offices can be renovated into energy efficient or even energy neutral buildings. A multidisciplinary view on the existing office buildings stock and users' demand has led to four renovation strategies which are described in this book [Dutch] EnergieSprong heeft het initiatief genomen dit boek te ontwikkelen waarin de Transitieformule laat zien hoe het vandaag de dag mogelijk is om bestaande kantoren heel energiezuinig of zelfs energieneutraal te renoveren. Een multidisciplinaire kijk op de bestaande kantorenvoorraad en de huidige vraag van gebruikers heeft geleid tot een viertal renovatiestrategieen die in dit boek beschreven worden.

  7. Renovating Charity Hospital or building a new hospital in post-Katrina New Orleans: economic rationale versus political will.

    Science.gov (United States)

    Leleu, Hervé; Moises, James; Valdmanis, Vivian Grace

    2013-02-01

    Since September 2005, Charity Hospital of New Orleans has been closed due to Hurricane Katrina. A debate following the closing arose about whether this public hospital should be renovated or a new medical center affiliated with the Louisiana State University should be built. Using academic literature, government statistics, and popular press reports, we describe the economic implications that support the view that Charity Hospital should have been renovated. We also address why this policy was not pursued by demonstrating the influence politics and individual stakeholders (specifically, Louisiana State University) had on the eventual policy pursued. In this commentary we also note the political identity movement away from public-sector provision of services to private-sector interests.

  8. Carmes Polytechnique, Housing in the Heart of Paris Energy renovation of a social housing estate in Paris

    Directory of Open Access Journals (Sweden)

    Christian Horn

    2017-12-01

    Full Text Available The architecture offices Atelier de la Seine and Rethink have been commissioned with the engineers Pouget Consultants by the social landlord Paris Habitat for the extensive renovation of a social housing estate in the historic centre of Paris. The estate has been built in 1930 and integrates a part of the former college of the Lombard build in the 17th century. It belongs to the social housing typology 'Habitations à Bon Marché (HBM' constructed between1894 and 1949. This typology is generally characterized by its integration in its urban context and an apparent brick facade. The renovation project includes a focus on the reduction of the energy consumption. An important subject, as of the total number of 4.6 millions of social housing in France more than 50 % have been build before 1975 (before the first thermal regulation and many are still considered energy-intensive.

  9. Evolutionary and developmental modules.

    Science.gov (United States)

    Lacquaniti, Francesco; Ivanenko, Yuri P; d'Avella, Andrea; Zelik, Karl E; Zago, Myrka

    2013-01-01

    The identification of biological modules at the systems level often follows top-down decomposition of a task goal, or bottom-up decomposition of multidimensional data arrays into basic elements or patterns representing shared features. These approaches traditionally have been applied to mature, fully developed systems. Here we review some results from two other perspectives on modularity, namely the developmental and evolutionary perspective. There is growing evidence that modular units of development were highly preserved and recombined during evolution. We first consider a few examples of modules well identifiable from morphology. Next we consider the more difficult issue of identifying functional developmental modules. We dwell especially on modular control of locomotion to argue that the building blocks used to construct different locomotor behaviors are similar across several animal species, presumably related to ancestral neural networks of command. A recurrent theme from comparative studies is that the developmental addition of new premotor modules underlies the postnatal acquisition and refinement of several different motor behaviors in vertebrates.

  10. Moving to Google Cloud: Renovation of Global Borehole Temperature Database for Climate Research

    Science.gov (United States)

    Xiong, Y.; Huang, S.

    2013-12-01

    Borehole temperature comprises an independent archive of information on climate change which is complementary to the instrumental and other proxy climate records. With support from the international geothermal community, a global database of borehole temperatures has been constructed for the specific purpose of the study on climate change. Although this database has become an important data source in climate research, there are certain limitations partially because the framework of the existing borehole temperature database was hand-coded some twenty years ago. A database renovation work is now underway to take the advantages of the contemporary online database technologies. The major intended improvements include 1) dynamically linking a borehole site to Google Earth to allow for inspection of site specific geographical information; 2) dynamically linking an original key reference of a given borehole site to Google Scholar to allow for a complete list of related publications; and 3) enabling site selection and data download based on country, coordinate range, and contributor. There appears to be a good match between the enhancement requirements for this database and the functionalities of the newly released Google Fusion Tables application. Google Fusion Tables is a cloud-based service for data management, integration, and visualization. This experimental application can consolidate related online resources such as Google Earth, Google Scholar, and Google Drive for sharing and enriching an online database. It is user friendly, allowing users to apply filters and to further explore the internet for additional information regarding the selected data. The users also have ways to map, to chart, and to calculate on the selected data, and to download just the subset needed. The figure below is a snapshot of the database currently under Google Fusion Tables renovation. We invite contribution and feedback from the geothermal and climate research community to make the

  11. Involvement of Individuals in the Development of Technical Solutions and Rules of Management for Building Renovation Projects: A Case Study of Latvia

    Science.gov (United States)

    Pukite, I.; Grekis, A.; Geipele, I.; Zeltins, N.

    2017-08-01

    In March 2016, the Latvian government approved a new support program for increasing energy efficiency in residential apartment buildings. For the support of renovation of apartment buildings in the period from 2016 to 2023, 166 470 588 EUR will be available. Different persons, such as energy auditors, designers, architects, project managers and builders, will be involved in the process of planning, development and implementation of building renovation. At the development stage of the building renovation project, special attention should be devoted to the first stage - energy audit and technical project development. The problem arises due to the fact that each of these individuals, during the development of technical building documentation, does not work as a completely unified system. The implementation of construction project planning and organisational management system is one of the most important factors to guarantee that the quality of building renovation project is ensured in accordance with the laws and regulatory standards. The paper studies mutual cooperation, professionalism and the role of information feedback of personnel involved in the planning stage of building renovation, which is an essential prerequisite for the renovation process in order to achieve high quality of work and reduce the energy performance indicator. The present research includes the analysis of different technical solutions and their impact on energy efficiency. Mutual harmonisation of technical specifications is also investigated.

  12. Adoption of innovative energy systems in social housing: Lessons from eight large-scale renovation projects in The Netherlands

    International Nuclear Information System (INIS)

    Hoppe, Thomas

    2012-01-01

    Thanks to new insights on the impacts that dwellings have throughout their life cycles, there has been increased attention to retrofitting innovative energy systems (IES) in existing housing. This paper uses an explorative case study design to gain more knowledge about the governance aspects of this under-researched topic. The central research question is: Which factors influence the adoption of innovative energy systems in social housing sites during renovation projects? To answer this question, eight large-scale renovation projects in The Netherlands were investigated. These case studies allowed the identification of barriers, enabling factors and perspectives from three main actors—housing associations, tenants and local authorities. It turns out that adopting IES encounters many barriers: lack of trust between project partners, delay in project progress, financial feasibility considerations, lack of support from tenants, lengthy legal permit procedures, over-ambitious project goals, poor experiences in previous projects, and IES ambitions that are not taken serious by key decision-makers. Furthermore, IES were only successfully fitted in three of the eight projects. Moreover, ambitions were lowered as the projects progressed in all the cases investigated. The study calls for further systematic, in-depth comparison of fitting IES in large-scale renovation projects in social housing. - Highlights: ► Attention to adoption of innovative energy systems in social housing. ► Several non-technical factors influence adoption. ► In-depth analysis of eight local-level renovation projects. ► Ambitions are lowered as projects progress. ► Barriers: financial feasibility, over-ambitious goals, delay, lack of trust.

  13. Overview of dual process behavioural models and their implications on decision-making of private dwellers regarding deep energy renovation

    OpenAIRE

    Taranu, Victoria; Verbeeck, Griet

    2016-01-01

    Understanding both rational and heuristic thinking is important for explaining proenvironmental behaviour. Theoretical findings regarding dual process models can be useful to explain and influence decisions of private owners in the context of energy renovation. The existing building stock has a big potential in contributing to the reduction of energy consumption. Even though surveys show that dwellers acknowledge the importance of energy efficient buildings and the technologies to achieve ...

  14. Renewable energy: Political momentum and technology for a sustainable Mexico; Energias Renovables: Impulso politico y tecnologico para un Mexico sustentable

    Energy Technology Data Exchange (ETDEWEB)

    Romero Hernandez, Sergio; Romero Hernandez, Omar; Wood, Duncan [Instituto Tecnologico Autonomo de Mexico (ITAM) (Mexico)

    2011-04-15

    The renewable energy sector in Mexico, as shown in this book, is alive and in good condition, prospers and has great potential. In this regard, it is essential that Mexico sees itself as a country with an energy future beyond Cantarell, beyond Pemex and beyond oil. The future of renewable energy offers great hope for the country and the region, and the time is right for a consensus government, business and social more strongly boost the development of this sector. This book discusses the following topics: Renewable energy and sustainable economic development, the regulatory framework for the use of renewable energy, hydropower, bioenergy, Part I: biomass and biogas, bioenergy, Part II: Liquid biofuels; elements for promotion of wind energy in Mexico, geothermal energy, solar PV, solar thermal and micro. [Spanish] El sector de la energia renovable en Mexico, como se muestra en este libro, esta vivo y en buenas condiciones, prospera y tiene gran potencial. En ese sentido, resulta indispensable que Mexico se vea a si mismo como un pais con un futuro energetico mas alla de Cantarell, mas alla de PEMEX, mas alla del petroleo. El futuro de la energia renovable ofrece una gran esperanza para el pais y la region, y el tiempo es adecuado para que una concertacion gubernamental, empresarial y social impulse con mas fuerza el desarrollo de este sector. En este libro se analizan los siguientes temas: Energias renovables y desarrollo economico sustentable; el marco normativo de la utilizacion de las energias renovables; energia hidroelectrica; bioenergia, parte I: biomasa y biogas; bioenergia, parte II: biocombustibles liquidos; elementos para la promocion de la energia eolica en Mexico; energia geotermica; energia solar fotovoltaica; energia solar termica, y la microgeneracion.

  15. The influence of prefabricated pipe cement coatings and those made during pipe renovation on drinking water quality

    OpenAIRE

    Młyńska Anna; Zielina Michał

    2017-01-01

    Nowadays, cement coatings are often used as an anticorrosion protection of the internal surfaces of manufactured ductile iron water pipes. The protective cement linings are also commonly used for old water pipe renovation. In both cases, the cement lining is an excellent anticorrosion protection of the pipelines, effectively separating the pipe wall from the flowing water. Moreover, cement linings protect the pipelines not only by a mechanical barrier, but also by a chemical barrier creating ...

  16. Hot cell renovation in the spent fuel conditioning process facility at the Korea Atomic Energy Research Institute

    Energy Technology Data Exchange (ETDEWEB)

    Yu, Seung Nam; Lee, Jong Kwang; Park, Byung Suk; Cho, Il Je; Kim, Ki Ho [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2015-10-15

    The advanced spent fuel conditioning process facility (ACPF) of the irradiated materials examination facility (IMEF) at the Korea Atomic Energy Research Institute (KAERI) has been renovated to implement a lab scale electrolytic reduction process for pyroprocessing. The interior and exterior structures of the ACPF hot cell have been modified under the current renovation project for the experimentation of the electrolytic reduction process using spent nuclear fuel. The most important aspect of this renovation was the installation of the argon compartment within the hot cell. For the design and system implementation of the argon compartment system, a full-scale mock-up test and a three-dimensional (3D) simulation test were conducted in advance. The remodeling and repairing of the process cell (M8a), the maintenance cell (M8b), the isolation room, and their utilities were also planned through this simulation to accommodate the designed argon compartment system. Based on the considered refurbishment workflow, previous equipment in the M8 cell, including vessels and pipes, were removed and disposed of successfully after a zoning smear survey and decontamination, and new equipment with advanced functions and specifications were installed in the hot cell. Finally, the operating area and isolation room were also refurbished to meet the requirements of the improved hot cell facility.

  17. Estimación del potencial de energías renovables en el estado de Sonora

    Directory of Open Access Journals (Sweden)

    Jorge Luis Taddei Bringas

    2016-06-01

    Full Text Available La etapa de uso de combustibles fósiles está llegando a su fin, debido principalmente a la escasez y problemas de contaminación que originan. En la actualidad existe una marcada tendencia en aprovechar las fuentes renovables de energía, por su bajo impacto ambiental y menor emisión de gases de efecto invernadero (GEI, lo cual contribuye a independizar las políticas energéticas locales de las del mercado global, basadas en la supremacía petrolera. Para obtener el mayor provecho de las energías renovables, es importante determinar el potencial de los distintos recursos energéticos existentes en una región. En este trabajo se presenta una relación del potencial para explotar energías renovables en el estado de Sonora, México, como un paso previo para establecer acciones y políticas que busquen su posible utilización a gran escala.

  18. Tourist Quarter “Chinese-Baroque” of Dao Way District in Harbin City: experience, problems and perspectives of renovation.

    Directory of Open Access Journals (Sweden)

    Levoshko Svetlana

    2016-01-01

    Full Text Available This article analyzes results of an unique experience of the Dao Wai historic district renovation project in Harbin of the 2010th. It includes an interpretation of the stylistic features of the Dao Wai building. Also, there was made a presumptive conclusion about the origins of the “Chinese Baroque”, which is now famous Dao Wai, combining European order architecture and far Eastern decorative tradition. Presumptive conclusion was based on the construction area observing in 2011-2016 and on the Chinese sources. As a result of renovation, there was formed a new public space with high tourism potential. Social value and status of the Dao Wai has significantly grown. The significant cost increase of real estate and provided services is an essential consequence of the gentrification method. There are were noted increased problems of the native people forced to move from the center to the outskirts of the city. Also, this article analyzes the current stage of the second phase design of Dao Wai renovation project and the perspectives for its implementation.

  19. [The detector, the command neuron and plastic convergence].

    Science.gov (United States)

    Sokolov, E N

    1977-01-01

    The paper deals with the structure of detectors, the function of commanding neurones and the problem of relationship between detectors and commanding neurons. An example of hierarchial organization of detectors is provided by the colour analyser in which a layer of receptors, a layer of opponent neurones and a layer of colour-selective detectors are singled out. The colour detector is selectively sensitive to a certain combination of excitations at the input. If the detector is selectively activated by a certain combination of excitations at the input, the selective activation of the commanding neurone through a pool of motoneurones brings about a reaction at the output, specific in its organization. The reflexogenic zone of the reaction is determined by the detectors which converge on the commanding neurone controlling the given reaction. The plasticity of the reaction results from a plastic convergence of the detectors on the commanding neurone which controls the reaction. This comprises selective switching off the detectors from the commanding neurone (habituation) and connecting the detectors to the commanding neurone (facilitation).

  20. Doublet III neutral beam multi-stream command language system

    International Nuclear Information System (INIS)

    Campbell, L.; Garcia, J.R.

    1983-12-01

    A multi-stream command language system was developed to provide control of the dual source neutral beam injectors on the Doublet III experiment at GA Technologies Inc. The Neutral Beam command language system consists of three parts: compiler, sequencer, and interactive task. The command language, which was derived from the Doublet III tokamak command language, POPS, is compiled, using a recursive descent compiler, into reverse polish notation instructions which then can be executed by the sequencer task. The interactive task accepts operator commands via a keyboard. The interactive task directs the operation of three input streams, creating commands which are then executed by the sequencer. The streams correspond to the two sources within a Doublet III neutral beam, plus an interactive stream. The sequencer multiplexes the execution of instructions from these three streams. The instructions include reads and writes to an operator terminal, arithmetic computations, intrinsic functions such as CAMAC input and output, and logical instructions. The neutral beam command language system was implemented using Modular Computer Systems (ModComp) Pascal and consists of two tasks running on a ModComp Classic IV computer

  1. Facade renovation - replacement and restoration of the panels in a monument protected object

    Science.gov (United States)

    Novotný, Michal

    2017-12-01

    The article deals with problems of reconstruction of the facade and the associated problem of replacement or repair of the panels. In conventional buildings it is a smooth operation, but it is problematic in monument-protected objects. In the case of a common building, it is possible to choose any modern panels and simply replace them, but for historical objects we have to follow the claims and the rules of monument protection. In practice, it usually means the impossibility of use of modern panels, but at least a combination of old and modern technologies. Another possible solution to the problem is renovation, or repairs to the original state of the existing panels, of course with respect to the functionality of such panels. The implementation of such repairs must always be based on the technical and historical survey of the condition of the object and the repairs must be professionally designed. Subsequently, corrections are made, during which it is necessary to pay particular attention to observance of the technological procedures, rules and instructions particularly in terms of monument protection. However, the functionality of the works or elements made with regard to the quality of the environment within the building is not negligible. A common problem is the lack of control of technical requirements and functional requirements. Underestimation of the problems then leads to difficult repairs. The article points to the mistakes and problems of one such construction project on a historically protected chateau building.

  2. Thermal and Economic Analysis of Renovation Strategies for a Historic Building in Mediterranean Area

    Directory of Open Access Journals (Sweden)

    Simona Cirami

    2017-07-01

    Full Text Available Around 30% of the European building stock was built before 1950, when no regulations about energy efficiency were in force. Since only a small part of them has been renovated by now, the energy performance of this building stock is on average quite poor, resulting in a significant impact on the energy balance of European countries, as confirmed by data published by ISTAT (Italian National Statistical Institute. However, energy retrofit in historic edifices is a quite demanding issue as any intervention must take into account the need to preserve existing building materials and appearances while also allowing reversibility and low invasiveness. As an example, in these buildings it is not possible to apply an ETICS (External Thermal Insulation Composite System, since this would alter the historic and architectural value of the façade. On the other hand, internal insulation would have the drawback of reducing the net useful floor area, which also implies a loss of economic value. Moreover, internal insulation may induce overheating risks and mold formation. In this paper, all these issues are investigated with reference to an existing historic building located in southern Italy, showing that a retrofit strategy aimed at energy savings and cost-effectiveness is still possible if suitable materials and solutions are adopted.

  3. Rehabilitation centers in change: participatory methods for managing redesign and renovation.

    Science.gov (United States)

    Lahtinen, Marjaana; Nenonen, Suvi; Rasila, Heidi; Lehtelä, Jouni; Ruohomäki, Virpi; Reijula, Kari

    2014-01-01

    The aim of this article is to describe a set of participatory methods that we have either developed or modified for developing future work and service environments to better suit renewable rehabilitation processes. We discuss the methods in a larger framework of change process model and participatory design. Rehabilitation organizations are currently in transition; customer groups, financing, services, and the processes of rehabilitation centers are changing. The pressure for change challenges the centers to develop both their processes and facilities. There is a need for methods that support change management. Four participatory methods were developed: future workshop, change survey, multi-method assessment tool, and participatory design generator cards. They were tested and evaluated in three rehabilitation centers at the different phases of their change process. The developed methods were considered useful in creating a mutual understanding of the change goals between different stakeholders, providing a good picture of the work community's attitudes toward the change, forming an integrated overview of the built and perceived environment, inspiring new solutions, and supporting the management in steering the change process. The change process model described in this article serves as a practical framework that combined the viewpoints of organizational and facility development. However, participatory design continues to face challenges concerning communication between different stakeholders, and further development of the methods and processes is still needed. Intervention studies could provide data on the success factors that enhance the transformations in the rehabilitation sector. Design process, methodology, organizational transformation, planning, renovation.

  4. Comparison and development of sustainable office façade renovation solutions in the Netherlands

    Directory of Open Access Journals (Sweden)

    Michiel Ritzen

    2013-12-01

    Full Text Available Environmental, commercial and societal developments in the Netherlands stimulate the environmental improvement of the existing office building stock. In the Netherlands, about 15% of all office area was vacant in 2012, and the majority of offices have a relative poor energy performance. To measure the improvement, different assessment tools are applied. These tools either focus on one aspect, such as operation energy, and result in a specific outcome such as MJ/m2, or these tools combine different aspects, such as energy and materials, through a weighted system and result in a generic outcome, such as ‘excellent’.In this research, the relation between assessment outcome and actual environmental impact is investigated of both types of tools, by reflecting the outcome of the tool to the carrying capacity of a system. The relation is investigated through a comparison of the energy and material aspect of three office façade renovation solutions using four different assessment tools. Using a tool in which energy and material impact is related to the carrying capacity, current energy focused optimization might lead to a sub optimization of actual environmental impact. To illustrate this, a calculated façade solution is presented with minimal environmental impact based on carrying capacity.

  5. Renovating the Pyramid of Needs: Contemporary Extensions Built Upon Ancient Foundations.

    Science.gov (United States)

    Kenrick, Douglas T; Griskevicius, Vladas; Neuberg, Steven L; Schaller, Mark

    2010-05-01

    Maslow's pyramid of human needs, proposed in 1943, has been one of the most cognitively contagious ideas in the behavioral sciences. Anticipating later evolutionary views of human motivation and cognition, Maslow viewed human motives as based in innate and universal predispositions. We revisit the idea of a motivational hierarchy in light of theoretical developments at the interface of evolutionary biology, anthropology, and psychology. After considering motives at three different levels of analysis, we argue that the basic foundational structure of the pyramid is worth preserving, but that it should be buttressed with a few architectural extensions. By adding a contemporary design feature, connections between fundamental motives and immediate situational threats and opportunities should be highlighted. By incorporating a classical element, these connections can be strengthened by anchoring the hierarchy of human motives more firmly in the bedrock of modern evolutionary theory. We propose a renovated hierarchy of fundamental motives that serves as both an integrative framework and a generative foundation for future empirical research. © The Author(s) 2010.

  6. Implicaciones medioambientales y socioeconómicas de las energías renovables

    Directory of Open Access Journals (Sweden)

    Carlos J. Pardo Abad

    2001-06-01

    Full Text Available El impacto de la energía sobre el medio ambiente es profundo y cada vez más complicado de resolver. Los problemas afectan a distintas escalas geográficas y demandan la participación más activa de las energías renovables. Los beneficios no sólo son medioambientales sino también económicos y sociales: reducción de emisiones contaminantes a la atmósfera, creación de empleo, impulso tecnológico, incremento de la competitividad industrial, modernización y desarrollo de recursos propios en áreas rurales, etc.The impact of energy on environment is deep and it is becoming more and more complicated to resolve. The problems affect several geographical scales and require a more active participation of renewable energies. Benefits are not only environmental, but also economic and social: reduction of pollutant emissions to atmosphere, creation of newjobs, technological boost, increase of the industrial competitiveness, modernization and development of own resources in country áreas, etc.

  7. A Reflection on Low Energy Renovation of Residential Complexes in Southern Europe

    Directory of Open Access Journals (Sweden)

    Helena Corvacho

    2016-09-01

    Full Text Available The transformation of European existing building stock towards very low energy buildings requires a new approach. In this context, it seems reasonable to think that buildings should no longer be renovated individually but as part of a global energy system. Focusing on larger urban units may present some scale advantages and may constitute an opportunity to change the urban environment in a smart energy way. Specificities of Southern European countries are addressed. Due either to the climate or the life style, there are large differences in energy consumption per dwelling among southern and northern European countries. How much heating energy will be saved by over-insulating building envelopes if people do not feel the need to heat their houses in the first place? In addition, real energy use in buildings frequently shows major differences with respect to the predicted consumption. The definition of realistic solutions demands the availability of realistic predictions. A case of a residential complex in Portugal is used to illustrate the main questions and to conclude that moving from a building to a group of buildings scale may be an interesting challenge for policy makers to look closer in the near future.

  8. Massive financing of the energy transition - SFTE feasibility study: synthesis report, Energy renovation of public buildings

    International Nuclear Information System (INIS)

    2014-11-01

    The Energy Shift Financing Agency's (SFTE) project aims to establish a broad partnership between public and private entities to stimulate the economy and deliver between euros 180 bn and euros 420 bn of investment in Europe over 10 years for the benefit of medium-sized projects (in the order of euros 1 m) that are necessary for the energy transition. It will enable EU banks to finance the energy renovation of public buildings under excellent - cheap and long-term - conditions. A feasibility study has been conducted by the AFTER association with an exemplary consortium of public and private stakeholders in France: local authorities, industry players, banks/financial institutions, NGOs, Plan Batiment Durable. Many European institutions have expressed their interest in the initiative. Now the implementation of the SFTE project requires a commitment from European and national public authorities. Such a proactive real-estate policy would significantly contribute to economic recovery, cut costs, CO_2 emissions and the external deficit and improve energy independence, and could quickly create jobs. This document is the French version of the synthesis report of the SFTE project feasibility study. Two notes are attached to the document: one about the SFTE project adaptation to the Juncker's 315 bn euros investment plan, and the other about the selection of public buildings energy retrofitting in the Juncker plan and the French-German proposals

  9. Advantage of the renewable energies in isolated zones; Aprovechamiento de las energias renovables en zonas aisladas

    Energy Technology Data Exchange (ETDEWEB)

    Mendoza Zazueta, Jose Antonio [Fideicomiso de Riesgo Compartido de la SAGARPA (Mexico)

    2007-07-15

    The present article has as objective to present the experiences obtained for more than ten years, in the development and implementation of actions that in the matter of renewable energy have been orchestrated in the Mexican field by the Secretariat of Agriculture, Animal Industry, Rural Development, Fishing, and Nutrition, trough the Shared Risk Trust Fund. The activities began in 1994; the most common applications realized are the water pumping for the drinking trough of cattle and the automation of the irrigation in small surfaces with fruit trees, vegetables, forages and the operation of greenhouses. [Spanish] El presente articulo tiene como objetivo presentar las experiencias obtenidas durante mas de diez anos, en el desarrollo e implementacion de acciones que en materia de energia renovable se han instrumentado en el campo mexicano por la the Secretaria de Agricultura, Ganaderia, Desarrollo Rural Pesca y Alimentacion, a traves del Fideicomiso de Riesgo Compartido. Las actividades se iniciaron en 1994, las aplicaciones mas comunes realizadas son el bombeo de agua para el abrevadero de ganado y la tecnificacion del riego en pequenas superficies con frutales, hortalizas, forrajes y la operacion de invernaderos.

  10. The Datacon Master -- Renovation of a Datacon field bus communications system for accelerator control

    International Nuclear Information System (INIS)

    Kerner, T.M.

    1995-01-01

    The Datacon system is a serial coaxial transformer isolated communication field bus system used to control and monitor accelerator remote devices. The Datacon field bus has been a BNL accelerator standard since its initial use in 1965. A single Datacon field bus supports up to 256 devices on a multidrop RG62A/U coaxial cable with up to 33 devices or 2,000 feet between repeaters or buffered branches. The forcing factor to renovate was the inability to repair the aging PDP-8E and PDP10 computers. The maintenance on this aging system was costly and the large number of accelerator devices dependent on the Datacon system could not be converted in a reasonable period of time to a new modern field bus. A commercial VMEbus host CPU mated with a custom designed VMEbus SBC event driven serial communications engine featuring a superscaler RISC 32-bit Intel i960 CPU met the design challenge. The commercial VMEbus host runs the VxWorks real-time operating system and connects to UNIX workstations over a Ethernet LAN. The V110 Datacon Master is the custom designed front end computer that integrates an accelerator event time line system with accelerator devices for up to 8 ppm users adding new capabilities

  11. Centralized Command and Control of Theater Missile Defense: The Joint Force Missile Defense Component Coordinator

    National Research Council Canada - National Science Library

    Bucey, William H

    2006-01-01

    .... The numerous commands, decentralized command and control, and limited and expensive resources involved in TMD require changes to the joint doctrine in order to provide unity of command and economy of force...

  12. ASTP crewmen in Docking Module trainer during training session at JSC

    Science.gov (United States)

    1975-01-01

    An interior view of the Docking Module trainer in bldg 35 during Apollo Soyuz Test Project (ASTP) joint crew training at JSC. Astronaut Thomas P. Stafford, commander of the American ASTP prime crew, is on the right. The other crewman is Cosmonaut Aleksey A. Leonov, commander of the Soviet ASTP prime crew. The training session simulated activities on the second day in Earth orbit. The Docking Module is designed to link the Apollo and Soyuz spacecraft.

  13. Commander manipulator scoops prestigious mulit-million pound BNFL contract

    International Nuclear Information System (INIS)

    Bailey, Andrew.

    1997-01-01

    Twenty-one Commander robotic arms are on order from INBIS (formerly Ricardo Hitec) and BNFL Engineering Limited (''BEL'', the engineering arm of parent company BNFL). The multi-million pound contract was won amid fierce competition from other well-known names in robotic engineering. The specially designed Commander manipulators will be engaged in remotely handling Intermediate Level Waste (ILW) in a suite of four BNFL ILW plants, which are currently either under construction or planned at Sellafield. The first Commander will delivered to BNFL's Sellafield Silo Emptying Project in January 1998. (Author)

  14. Full Spectrum Operations: An Analysis of Course Content at the Command and General Staff College

    National Research Council Canada - National Science Library

    Turner, II, Frank L

    2008-01-01

    .... This monograph examined the Intermediate Level Education, the Advanced Military Studies Program, and the Tactical Commanders Development Program curricula at the Command and General Staff College...

  15. Unity connecting module in SSPF

    Science.gov (United States)

    1998-01-01

    In the Space Station Processing Facility, the Unity connecting module, part of the International Space Station, is shown with Pressurized Mating Adapters 1 (left) and 2 (right) attached. Unity is scheduled to undergo testing of the common berthing mechanism to which other space station elements will dock. Unity is the primary payload on mission STS-88, targeted to launch Dec. 3, 1998. Other testing includes the Pad Demonstration Test to verify the compatibility of the module with the Space Shuttle as well as the ability of the astronauts to send and receive commands to Unity from the flight deck of the orbiter. Unity is expected to be ready for installation into the payload canister on Oct. 25, and transported to Launch Pad 39-A on Oct. 27. The Unity will be mated to the Russian-built Zarya control module which should already be in orbit at that time.

  16. A Commander in Chief's Network-Centric Odyssey

    National Research Council Canada - National Science Library

    Copley, E

    2002-01-01

    .... Each Armed Service has begun training and equipping its force using the tenets of Network-Centric Operations, but those forces come together for the first time under the combatant Commander-in-Chief...

  17. Architecting Joint Command and Control System of System Capability Certifications

    National Research Council Canada - National Science Library

    Acosta, Jacob; Hoesly, Scot; Huseth, Scott; Krider, Steven; Lamb, Jeremy; Martin, Calvin; Medina, Vince; Medina, Jorge; Nguyen, Michael; Patel, Jaykant

    2007-01-01

    Command, Control, Communications, Computers, and Intelligence (C4I) systems, each originally designed to address a single warfighting function, have been assembled into an interdependent C4I System of Systems (SoS...

  18. Acquisition and Development of System Command (SYSCOM) Technical Manuals

    National Research Council Canada - National Science Library

    2003-01-01

    ... (NAVSEA) and Space and Naval Warfare Systems Command (SPAWAR). TMs are the primary information source for technical training, installation, operation, testing, maintenance, and repair associated with NAVSEA/SPAWAR systems or equipment...

  19. The Big Issue: Command and Combat in the Information Age

    National Research Council Canada - National Science Library

    Potts, David

    2003-01-01

    This Occasional Paper considers command and combat in the information age. A small team in the British Army's conceptual "think tank," the Directorate General Development and Doctrine, worked together on this issue for 18 months...

  20. Implementing UPDM to develop command and control systems

    CSIR Research Space (South Africa)

    Oosthuizen, R

    2016-09-01

    Full Text Available Systems engineering is an established approach to develop systems, including complex sociotechnical systems such as Command and Control (C2) Systems. These systems often occur through introduction of a new technology into an existing system...

  1. U.S. Pacific Command > Organization > Organization Chart

    Science.gov (United States)

    Responsibility USPACOM Previous Commanders Organization Organization Chart Media News Flickr Photos Video Directory Media Inquiries Home : Organization : Organization Chart About DoD DoD Careers Join the Military

  2. Contract Claims Experience at the Naval Air Systems Command

    National Research Council Canada - National Science Library

    Carty, John

    1999-01-01

    ...) experienced at the Naval Air Systems Command (NAVAIR) between January 1997 and December 1998 as a means to identify areas of potential improvement in management practices which could result in reduced numbers of claims being submitted...

  3. Measuring, Monitoring, and Managing Knowledge in Command and Control Organizations

    National Research Council Canada - National Science Library

    Freeman, Jared; Weil, Shawn A; Hess, Kathleen P

    2006-01-01

    .... Iconography and interaction standards for such displays are well defined. Less attention has been paid to representing non-geographical information, such as information about the state of knowledge and decision making in a command staff...

  4. Intelligent Tutoring System for Teaching Battlefield Command Reasoning Skills

    National Research Council Canada - National Science Library

    Domeshek, Eric

    2002-01-01

    ... (ITS) for high-level battlefield command reasoning skills. The ultimate goal of this research is to develop new ITS techniques and technology for teaching skills that cannot he taught as simple methods and procedures to he followed...

  5. From Sensory Space to Motor Commands: Lessons from Saccades

    National Research Council Canada - National Science Library

    Optican, L

    2001-01-01

    .... We conclude that intrinsic brain signals might represent non-physical signals, such as desired sensory states, approximate motor drives, and distributed motor commands, rather than physical signals (e.g...

  6. Command and Control Planning and Teamwork: Exploring the Future

    National Research Council Canada - National Science Library

    Sterling, Bruce S; Lickteig, Carl W

    2000-01-01

    .... This paper examines how participant ratings of command and control planning and observer assessments of teamwork were related in a series of futuristic missions conducted by the Mounted Maneuver...

  7. Opening the Aperture... Ending Service "Branding" of US Unified Commands

    National Research Council Canada - National Science Library

    Handy, Russell

    2003-01-01

    .... It asserts that over tine, the defense establishment runs the risk of establishing a cultural identity in the command that limits perspectives to aground-, sea-, or air and space-centric viewpoint...

  8. The International Criminal Court: Considerations for the Joint Force Commander

    National Research Council Canada - National Science Library

    Sutton, Michael

    2003-01-01

    An analysis of the issues and remedies a Joint Force Commander should be concerned about because of the relationship between the United States and the newly-created International Criminal Court (ICC...

  9. Gesture Commanding of a Robot with EVA Gloves

    Data.gov (United States)

    National Aeronautics and Space Administration — Gestures commands allow a human operator to directly interact with a robot without the use of intermediary hand controllers. There are two main types of hand gesture...

  10. Should the Department of Defense Establish a Joint Corrections Command

    National Research Council Canada - National Science Library

    Evans, Thomas P

    2008-01-01

    ... and control element at the combatant command level. The military and the Coalition Provisional Authority's ability to establish a national penal system, conduct standardized training and effective prison operations to rebuild the Iraqi penal system...

  11. Joint Forward Operating Base Elements of Command and Control

    National Research Council Canada - National Science Library

    Summers, William

    2002-01-01

    ... and its associated leadership, command of air assets at a joint forward operating base lacks guidance. Today, the United States prosecutes an air war over Afghanistan from bases in Uzbekistan, Pakistan, and Afghanistan...

  12. Software and commands on VAX CERN. User's guide

    International Nuclear Information System (INIS)

    Balashov, V.K.; Trofimov, V.V.

    1990-01-01

    This guide describes a structure of applications software, which is available at VAX-type computers in JINR. The software includes program libraries, scientific programs and commands developed at CERN. 20 refs

  13. Systems Engineering Management Training at Naval Air Systems Command

    National Research Council Canada - National Science Library

    Rebel, James

    2000-01-01

    Within the past few years, the Naval Air Systems Command (NAVAIR) has undergone several major changes including an engineering reorganization from a matrix organization to an Integrated Program Team/Competency Aligned Organization (IPT/CAO...

  14. Public Affairs Capacity Building: A Soft Tool for Combatant Commanders

    National Research Council Canada - National Science Library

    Salata, Jason P

    2008-01-01

    Public affairs capacity building is a valuable soft component of the Combatant Commander's Theater Campaign Plan that builds habitual relationships, fosters transparency, and enhances the ability to shape the AOR...

  15. Recommendations on Future Operational Environments Command Control and Cyber Security

    OpenAIRE

    Goztepe, Kerim

    2015-01-01

    It is a well-known fact that today a nation's telecommunication networks, critical infrastructure, and information systems are vulnerable to growing number of attacks in cyberspace. Cyber space contains very different problems involving various sets of threats, targets and costs. Cyber security is not only problem of banking, communication or transportation. It also threatens core systems of army as command control. Some significant recommendations on command control (C2) and cyber security h...

  16. Comparative Research of Navy Voluntary Education at Operational Commands

    Science.gov (United States)

    2017-03-01

    into a national and international market. This is especially effects land-grant institutions who can educate the citizens within their state by...RESEARCH OF NAVY VOLUNTARY EDUCATION AT OPERATIONAL COMMANDS by Christopher B. Veenhuis March 2017 Thesis Co-Advisors: William Hatch Chad...COVERED Master’s thesis 4. TITLE AND SUBTITLE COMPARATIVE RESEARCH OF NAVY VOLUNTARY EDUCATION AT OPERATIONAL COMMANDS 5. FUNDING NUMBERS 6. AUTHOR(S

  17. The Role of the NCO Inside the BCT Command Post

    Science.gov (United States)

    2016-11-22

    formation. Doctrine 2015 introduced the importance of mission command doctrine into operations at all levels of leadership, and in the last five...utilizing tents is crucial to support the combined arms maneuver of the brigade. Physical layout of the command post can promote or hinder the ability to...equipment when a printer starting printing or a coffee maker was turned on? Understanding how PDISE configurations distribute loads in order to maintain

  18. Command Leadership DEOCS 4.1 Construct Validity Summary

    Science.gov (United States)

    2017-08-01

    Command Leadership DEOCS 4.1 Construct Validity Summary DEFENSE EQUAL OPPORTUNITY MANAGEMENT INSTITUTE...Report #15-18 1 Command Leadership DEOCS 4.1 Construct Validity Summary Background In 2014, DEOMI released DEOCS 4.0 for Department of Defense...individual items on the DEOCS. The following paper details the work conducted to modify the factor of Leadership Cohesion so that it focuses more

  19. Environmental Licensing: an Instrument of Command and Control by Exception?

    OpenAIRE

    Sleman Chams, Juliette; Gestión Ambiental de la Corporación Autónoma Regional del Atlántico-CRA, autoridad ambiental del Departamento del Atlántico,; Velásquez Muñoz, Carlos Javier; Universidad del Norte (Barranquilla)

    2016-01-01

    This article analyzes the situation of the most important instrument of command and control existing in the Colombian environmental legislation: the environmental license. Since its first formal regulation, on behalf of Decree 1753 of August 3, 1994, has received several modifications which, apparently, have made, in spite of its importance, in an instrument of command and control by exception. The article revises on the scope of each of the modifications and the justifications put forward by...

  20. Scenario design : adaptive architecture for command and control experiment eight

    OpenAIRE

    Clark, Frankie J.

    2002-01-01

    Approved for public release; distribution is unlimited. The Adaptive Architectures for Command and Control (A2C2) project is an ongoing research effort sponsored by the Office of Naval Research to explore adaptation in joint command and control. The objective of the project's eighth experiment is to study the adjustments that organizations make when they are confronted with a scenario for which their organizational is ill-suited. To accomplish this, teams will each be in one of two fundame...

  1. An analysis of Navy Recruiting Command's officer goaling models

    OpenAIRE

    Senter, Robert R.

    1990-01-01

    Approved for public release; distribution unlimited. This study examines the goaling models used by the Navy Recruiting Command for the Nurse Corps and Nuclear Propulsion Officer Candidate (NUPOC) programs. These two programs serve as representative samples for the numerous officer recruitment programs administered by the Navy Recruiting Command. The intent of the study is to analyze and validate the accuracy of the current goaling models, to ascertain factors which could improve the accur...

  2. Commands for financial data management and portfolio optimization

    OpenAIRE

    C. Alberto Dorantes

    2013-01-01

    Several econometric software offer portfolio management tools for practitioners and researchers. For example, MatLab and R offer a great variety of tools for the simulation, optimization, and analysis of financial time series. Stata, together with Mata, offers powerful programming tools for the simulation, optimization, and analysis of financial data. However, related user commands are scarce. In this presentation, commands for online market data collection, data manipulation, and financial a...

  3. Network, system, and status software enhancements for the autonomously managed electrical power system breadboard. Volume 3: Commands specification

    Science.gov (United States)

    Mckee, James W.

    1990-01-01

    This volume (3 of 4) contains the specification for the command language for the AMPS system. The volume contains a requirements specification for the operating system and commands and a design specification for the operating system and command. The operating system and commands sits on top of the protocol. The commands are an extension of the present set of AMPS commands in that the commands are more compact, allow multiple sub-commands to be bundled into one command, and have provisions for identifying the sender and the intended receiver. The commands make no change to the actual software that implement the commands.

  4. Sustainable covers for uranium mill tailings, USA: alternative design, performance, and renovation - 16369

    International Nuclear Information System (INIS)

    Waugh, William J.; Benson, Craig H.; Albright, William H.

    2009-01-01

    The U.S. Department of Energy Office of Legacy Management is investigating alternatives to conventional cover designs for uranium mill tailings. A cover constructed in 2000 near Monticello, Utah, USA, was a redundant design with a conventional low-conductivity composite cover overlain with an alternative cover designed to mimic the natural soil water balance as measured in nearby undisturbed native soils and vegetation. To limit percolation, the alternative cover design relies on a 160-cm layer of sandy clay loam soil overlying a 40- cm sand capillary barrier for water storage, and a planting of native sagebrush steppe vegetation to seasonally release soil water through evapotranspiration (ET). Water balance monitoring within a 3.0-ha drainage lysimeter, embedded in the cover during construction, provided convincing evidence that the cover has performed well over a 9-year period (2000- 2009). The total cumulative percolation, 4.8 mm (approximately 0.5 mm yr -1 ), satisfied a regulatory goal of -1 . Most percolation can be attributed to the very wet winter and spring of 2004-2005, when soil water content exceeded the storage capacity of the cover. Diversity, percent cover, and leaf area of vegetation increased over the monitoring period. Field and laboratory evaluations several years after construction show that soil structural development, changes in soil hydraulic properties, and development of vegetation patterns have not adversely impacted cover performance. A new test facility was constructed in 2008 near Grand Junction, Colorado, USA, to evaluate low-cost methods for renovating or transforming conventional covers into more sustainable ET covers. (authors)

  5. Conceptual design report: Nuclear materials storage facility renovation. Part 7, Estimate data

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-07-14

    The Nuclear Materials Storage Facility (NMSF) at the Los Alamos National Laboratory (LANL) was a Fiscal Year (FY) 1984 line-item project completed in 1987 that has never been operated because of major design and construction deficiencies. This renovation project, which will correct those deficiencies and allow operation of the facility, is proposed as an FY 97 line item. The mission of the project is to provide centralized intermediate and long-term storage of special nuclear materials (SNM) associated with defined LANL programmatic missions and to establish a centralized SNM shipping and receiving location for Technical Area (TA)-55 at LANL. Based on current projections, existing storage space for SNM at other locations at LANL will be loaded to capacity by approximately 2002. This will adversely affect LANUs ability to meet its mission requirements in the future. The affected missions include LANL`s weapons research, development, and testing (WRD&T) program; special materials recovery; stockpile survelliance/evaluation; advanced fuels and heat sources development and production; and safe, secure storage of existing nuclear materials inventories. The problem is further exacerbated by LANL`s inability to ship any materials offsite because of the lack of receiver sites for mate rial and regulatory issues. Correction of the current deficiencies and enhancement of the facility will provide centralized storage close to a nuclear materials processing facility. The project will enable long-term, cost-effective storage in a secure environment with reduced radiation exposure to workers, and eliminate potential exposures to the public. This report is organized according to the sections and subsections outlined by Attachment III-2 of DOE Document AL 4700.1, Project Management System. It is organized into seven parts. This document, Part VII - Estimate Data, contains the project cost estimate information.

  6. Conceptual design report: Nuclear materials storage facility renovation. Part 1, Design concept. Part 2, Project management

    International Nuclear Information System (INIS)

    1995-01-01

    The Nuclear Materials Storage Facility (NMSF) at the Los Alamos National Laboratory (LANL) was a Fiscal Year (FY) 1984 line-item project completed in 1987 that has never been operated because of major design and construction deficiencies. This renovation project, which will correct those deficiencies and allow operation of the facility, is proposed as an FY 97 line item. The mission of the project is to provide centralized intermediate and long-term storage of special nuclear materials (SNM) associated with defined LANL programmatic missions and to establish a centralized SNM shipping and receiving location for Technical Area (TA)-55 at LANL. Based on current projections, existing storage space for SNM at other locations at LANL will be loaded to capacity by approximately 2002. This will adversely affect LANUs ability to meet its mission requirements in the future. The affected missions include LANL's weapons research, development, and testing (WRD ampersand T) program; special materials recovery; stockpile survelliance/evaluation; advanced fuels and heat sources development and production; and safe, secure storage of existing nuclear materials inventories. The problem is further exacerbated by LANL's inability to ship any materials offsite because of the lack of receiver sites for mate rial and regulatory issues. Correction of the current deficiencies and enhancement of the facility will provide centralized storage close to a nuclear materials processing facility. The project will enable long-term, cost-effective storage in a secure environment with reduced radiation exposure to workers, and eliminate potential exposures to the public. This document provides Part I - Design Concept which describes the selected solution, and Part II - Project Management which describes the management system organization, the elements that make up the system, and the control and reporting system

  7. Conceptual design report: Nuclear materials storage facility renovation. Part 6, Alternatives study

    International Nuclear Information System (INIS)

    1995-01-01

    The Nuclear Materials Storage Facility (NMSF) at the Los Alamos National Laboratory (LANL) was a Fiscal Year (FY) 1984 line-item project completed in 1987 that has never been operated because of major design and construction deficiencies. This renovation project, which will correct those deficiencies and allow operation of the facility, is proposed as an FY 97 line item. The mission of the project is to provide centralized intermediate and long-term storage of special nuclear materials (SNM) associated with defined LANL programmatic missions and to establish a centralized SNM shipping and receiving location for Technical Area (TA)-55 at LANL. Based on current projections, existing storage space for SNM at other locations at LANL will be loaded to capacity by approximately 2002. This will adversely affect LANUs ability to meet its mission requirements in the future. The affected missions include LANL's weapons research, development, and testing (WRD ampersand T) program; special materials recovery; stockpile survelliance/evaluation; advanced fuels and heat sources development and production; and safe, secure storage of existing nuclear materials inventories. The problem is further exacerbated by LANL's inability to ship any materials offsite because of the lack of receiver sites for material and regulatory issues. Correction of the current deficiencies and enhancement of the facility will provide centralized storage close to a nuclear materials processing facility. The project will enable long-term, cost-effective storage in a secure environment with reduced radiation exposure to workers, and eliminate potential exposures to the public. This report is organized according to the sections and subsections outlined by Attachment 111-2 of DOE Document AL 4700.1, Project Management System. It is organized into seven parts. This document, Part VI - Alternatives Study, presents a study of the different storage/containment options considered for NMSF

  8. Conceptual design report: Nuclear materials storage facility renovation. Part 7, Estimate data

    International Nuclear Information System (INIS)

    1995-01-01

    The Nuclear Materials Storage Facility (NMSF) at the Los Alamos National Laboratory (LANL) was a Fiscal Year (FY) 1984 line-item project completed in 1987 that has never been operated because of major design and construction deficiencies. This renovation project, which will correct those deficiencies and allow operation of the facility, is proposed as an FY 97 line item. The mission of the project is to provide centralized intermediate and long-term storage of special nuclear materials (SNM) associated with defined LANL programmatic missions and to establish a centralized SNM shipping and receiving location for Technical Area (TA)-55 at LANL. Based on current projections, existing storage space for SNM at other locations at LANL will be loaded to capacity by approximately 2002. This will adversely affect LANUs ability to meet its mission requirements in the future. The affected missions include LANL's weapons research, development, and testing (WRD ampersand T) program; special materials recovery; stockpile survelliance/evaluation; advanced fuels and heat sources development and production; and safe, secure storage of existing nuclear materials inventories. The problem is further exacerbated by LANL's inability to ship any materials offsite because of the lack of receiver sites for mate rial and regulatory issues. Correction of the current deficiencies and enhancement of the facility will provide centralized storage close to a nuclear materials processing facility. The project will enable long-term, cost-effective storage in a secure environment with reduced radiation exposure to workers, and eliminate potential exposures to the public. This report is organized according to the sections and subsections outlined by Attachment III-2 of DOE Document AL 4700.1, Project Management System. It is organized into seven parts. This document, Part VII - Estimate Data, contains the project cost estimate information

  9. Conceptual design report: Nuclear materials storage facility renovation. Part 3, Supplemental information

    International Nuclear Information System (INIS)

    1995-01-01

    The Nuclear Materials Storage Facility (NMSF) at the Los Alamos National Laboratory (LANL) was a Fiscal Year (FY) 1984 line-item project completed in 1987 that has never been operated because of major design and construction deficiencies. This renovation project, which will correct those deficiencies and allow operation of the facility, is proposed as an FY 97 line item. The mission of the project is to provide centralized intermediate and long-term storage of special nuclear materials (SNM) associated with defined LANL programmatic missions and to establish a centralized SNM shipping and receiving location for Technical Area (TA)-55 at LANL. Based on current projections, existing storage space for SNM at other locations at LANL will be loaded to capacity by approximately 2002. This will adversely affect LANUs ability to meet its mission requirements in the future. The affected missions include LANL's weapons research, development, and testing (WRD ampersand T) program; special materials recovery; stockpile survelliance/evaluation; advanced fuels and heat sources development and production; and safe, secure storage of existing nuclear materials inventories. The problem is further exacerbated by LANL's inability to ship any materials offsite because of the lack of receiver sites for mate rial and regulatory issues. Correction of the current deficiencies and enhancement of the facility will provide centralized storage close to a nuclear materials processing facility. The project will enable long-term, cost-effective storage in a secure environment with reduced radiation exposure to workers, and eliminate potential exposures to the public. It is organized into seven parts. Part I - Design Concept describes the selected solution. Part III - Supplemental Information contains calculations for the various disciplines as well as other supporting information and analyses

  10. Shipboard Analytical Capabilities on the Renovated JOIDES Resolution, IODP Riserless Drilling Vessel

    Science.gov (United States)

    Blum, P.; Foster, P.; Houpt, D.; Bennight, C.; Brandt, L.; Cobine, T.; Crawford, W.; Fackler, D.; Fujine, K.; Hastedt, M.; Hornbacher, D.; Mateo, Z.; Moortgat, E.; Vasilyev, M.; Vasilyeva, Y.; Zeliadt, S.; Zhao, J.

    2008-12-01

    The JOIDES Resolution (JR) has conducted 121 scientific drilling expeditions during the Ocean Drilling Program (ODP) and the first phase of the Integrated Ocean Drilling Program (IODP) (1983-2006). The vessel and scientific systems have just completed an NSF-sponsored renovation (2005-2008). Shipboard analytical systems have been upgraded, within funding constraints imposed by market driven vessel conversion cost increases, to include: (1) enhanced shipboard analytical services including instruments and software for sampling and the capture of chemistry, physical properties, and geological data; (2) new data management capabilities built around a laboratory information management system (LIMS), digital asset management system, and web services; (3) operations data services with enhanced access to navigation and rig instrumentation data; and (4) a combination of commercial and home-made user applications for workflow- specific data extractions, generic and customized data reporting, and data visualization within a shipboard production environment. The instrumented data capture systems include a new set of core loggers for rapid and non-destructive acquisition of images and other physical properties data from drill cores. Line-scan imaging and natural gamma ray loggers capture data at unprecedented quality due to new and innovative designs. Many instruments used to characterize chemical compounds of rocks, sediments, and interstitial fluids were upgraded with the latest technology. The shipboard analytical environment features a new and innovative framework (DESCinfo) and application (DESClogik) for capturing descriptive and interpretive data from geological sub-domains such as sedimentology, petrology, paleontology, structural geology, stratigraphy, etc. This system fills a long-standing gap by providing a global database, controlled vocabularies and taxa name lists with version control, a highly configurable spreadsheet environment for data capture, and

  11. Conceptual design report: Nuclear materials storage facility renovation. Part 1, Design concept. Part 2, Project management

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-07-14

    The Nuclear Materials Storage Facility (NMSF) at the Los Alamos National Laboratory (LANL) was a Fiscal Year (FY) 1984 line-item project completed in 1987 that has never been operated because of major design and construction deficiencies. This renovation project, which will correct those deficiencies and allow operation of the facility, is proposed as an FY 97 line item. The mission of the project is to provide centralized intermediate and long-term storage of special nuclear materials (SNM) associated with defined LANL programmatic missions and to establish a centralized SNM shipping and receiving location for Technical Area (TA)-55 at LANL. Based on current projections, existing storage space for SNM at other locations at LANL will be loaded to capacity by approximately 2002. This will adversely affect LANUs ability to meet its mission requirements in the future. The affected missions include LANL`s weapons research, development, and testing (WRD&T) program; special materials recovery; stockpile survelliance/evaluation; advanced fuels and heat sources development and production; and safe, secure storage of existing nuclear materials inventories. The problem is further exacerbated by LANL`s inability to ship any materials offsite because of the lack of receiver sites for mate rial and regulatory issues. Correction of the current deficiencies and enhancement of the facility will provide centralized storage close to a nuclear materials processing facility. The project will enable long-term, cost-effective storage in a secure environment with reduced radiation exposure to workers, and eliminate potential exposures to the public. This document provides Part I - Design Concept which describes the selected solution, and Part II - Project Management which describes the management system organization, the elements that make up the system, and the control and reporting system.

  12. Outline of renovation for Mihama Public Relations (PR) Center on atomic power generation and nuclear applications

    Energy Technology Data Exchange (ETDEWEB)

    1983-05-01

    The Mihama PR Center of Kansai Electric Power Co. on atomic power generation and nuclear applications is now under entire renovation. It was constructed accompanying the construction of No. 1 unit in Mihama Nuclear Power Station, and opened in November, 1967, as the only PR facility of open house system. Since then, more than 1.9 million persons visited there in 15 years. Recently the space has become difficult to provide satisfactorily sophisticated exhibits because the importance of nuclear power generation has increased, and the diversified contents have been required. On the other hand, its building was cramped since many rooms were accommodated in the single round building of total area 815 m/sup 2/. In addition, the building has required drastic looking-over because of its deterioration and damages due to aging. The promotion of the understanding for the early securing of nuclear power plant location has been decided as the principal promotion item. The plan includes the modification of the existing building to the exhibition hall only as well as the completion and re-arrangement of the exhibits. It has been determined to construct a new building connected to the existing building, which accommodates a meeting hall, offices, utility machine room, etc., a total area being increased to 1457 m/sup 2/. The fund required is about 600 million yen. The construction work has started on December 1, 1982, aiming at the opening in July, 1983. The meeting hall is designed to seat about 120 persons and to employ multi-screen image techniques.

  13. Conceptual design report: Nuclear materials storage facility renovation. Part 3, Supplemental information

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-07-14

    The Nuclear Materials Storage Facility (NMSF) at the Los Alamos National Laboratory (LANL) was a Fiscal Year (FY) 1984 line-item project completed in 1987 that has never been operated because of major design and construction deficiencies. This renovation project, which will correct those deficiencies and allow operation of the facility, is proposed as an FY 97 line item. The mission of the project is to provide centralized intermediate and long-term storage of special nuclear materials (SNM) associated with defined LANL programmatic missions and to establish a centralized SNM shipping and receiving location for Technical Area (TA)-55 at LANL. Based on current projections, existing storage space for SNM at other locations at LANL will be loaded to capacity by approximately 2002. This will adversely affect LANUs ability to meet its mission requirements in the future. The affected missions include LANL`s weapons research, development, and testing (WRD&T) program; special materials recovery; stockpile survelliance/evaluation; advanced fuels and heat sources development and production; and safe, secure storage of existing nuclear materials inventories. The problem is further exacerbated by LANL`s inability to ship any materials offsite because of the lack of receiver sites for mate rial and regulatory issues. Correction of the current deficiencies and enhancement of the facility will provide centralized storage close to a nuclear materials processing facility. The project will enable long-term, cost-effective storage in a secure environment with reduced radiation exposure to workers, and eliminate potential exposures to the public. It is organized into seven parts. Part I - Design Concept describes the selected solution. Part III - Supplemental Information contains calculations for the various disciplines as well as other supporting information and analyses.

  14. Command and Data Handling Branch Internship

    Science.gov (United States)

    Billings, Rachel Mae

    2016-01-01

    Modular Integrated Stackable Layers (MISL) is a computer system designed for simple, fast, and cost effective flexible reconfiguration in space environments such as the ISS and Orion projects for various uses. Existing applications include wireless and wired communications, data acquisition and instrumentation, and camera systems, and potential applications include bus protocol converters and subsystem control. MISL is based on Texas Instruments (TI)' MSP430 16-bit ultra-low-power microcontroller device. The purpose of my project was to integrate the MISL system with a liquid crystal display (LCD) touchscreen. The LCD, manufactured by Crystalfontz and part number CFAF320240F-035T-TS, is a 320 by 240 RGB resistive color screen including an optional carrier board. The vast majority of the project was done with Altium Designer, a tool for printed circuit board (PCB) schematic capture, 3D design, and FPGA (Field Programmable Gate Array) development. The new PCB was to allow the LCD to directly stack to the rest of MISL. Research was done with datasheets for the TI microcontroller and touchscreen display in order to meet desired hardware specifications. Documentation on prior MISL projects was also utilized. The initial step was to create a schematic for the LCD, power bus, and data bus connections between components. A layout was then designed with the required physical dimensions, routed traces and vias, power and ground planes, layer stacks, and other specified design rules such as plane clearance and hole size. Multiple consultation sessions were held with Hester Yim, the technical discipline lead for the Command and Data Handling Branch, and Christy Herring, the lead PCB layout designer in the Electronic Design and Manufacturing Branch in order to ensure proper configuration. At the moment, the PCB is awaiting revision by the latter-mentioned branch. Afterwards, the board will begin to undergo the manufacturing and testing process. Throughout the internship at

  15. Rapid Response Command and Control (R2C2): a systems engineering analysis of scaleable communications for Regional Combatant Commanders

    OpenAIRE

    Sullivan, Lisa; Cannon, Lennard; Reyes, Ronel; Bae, Kitan; Colgary, James; Minerowicz, Nick; Leong, Chris; Lim, Harry; Lim, Hang Sheng; Ng, Chin Chin; Neo, Tiong Tien; Tan, Guan Chye; Ng, Yu Loon; Wong, Eric; Wong, Heng Yue

    2006-01-01

    Includes supplementary material. Disaster relief operations, such as the 2005 Tsunami and Hurricane Katrina, and wartime operations, such as Operation Enduring Freedom and Operation Iraqi Freedom, have identified the need for a standardized command and control system interoperable among Joint, Coalition, and Interagency entities. The Systems Engineering Analysis Cohort 9 (SEA-9) Rapid Response Command and Control (R2C2) integrated project team completed a systems engineering (SE) ...

  16. Indonesian Automatic Speech Recognition For Command Speech Controller Multimedia Player

    Directory of Open Access Journals (Sweden)

    Vivien Arief Wardhany

    2014-12-01

    Full Text Available The purpose of multimedia devices development is controlling through voice. Nowdays voice that can be recognized only in English. To overcome the issue, then recognition using Indonesian language model and accousticc model and dictionary. Automatic Speech Recognizier is build using engine CMU Sphinx with modified english language to Indonesian Language database and XBMC used as the multimedia player. The experiment is using 10 volunteers testing items based on 7 commands. The volunteers is classifiedd by the genders, 5 Male & 5 female. 10 samples is taken in each command, continue with each volunteer perform 10 testing command. Each volunteer also have to try all 7 command that already provided. Based on percentage clarification table, the word “Kanan” had the most recognize with percentage 83% while “pilih” is the lowest one. The word which had the most wrong clarification is “kembali” with percentagee 67%, while the word “kanan” is the lowest one. From the result of Recognition Rate by male there are several command such as “Kembali”, “Utama”, “Atas “ and “Bawah” has the low Recognition Rate. Especially for “kembali” cannot be recognized as the command in the female voices but in male voice that command has 4% of RR this is because the command doesn’t have similar word in english near to “kembali” so the system unrecognize the command. Also for the command “Pilih” using the female voice has 80% of RR but for the male voice has only 4% of RR. This problem is mostly because of the different voice characteristic between adult male and female which male has lower voice frequencies (from 85 to 180 Hz than woman (165 to 255 Hz.The result of the experiment showed that each man had different number of recognition rate caused by the difference tone, pronunciation, and speed of speech. For further work needs to be done in order to improving the accouracy of the Indonesian Automatic Speech Recognition system

  17. Actions done by SAGARPA to foster renewable energies; Acciones realizadas por la SAGARPA para el fomento de las energias renovables

    Energy Technology Data Exchange (ETDEWEB)

    Diez de Sollano Elcoro, Rodrigo [Fideicomiso de riesgo compartido, Mexico (Mexico)

    2007-06-15

    This presentation is mainly focused on all the projects carried out in order to boost renewable energies. Such projects have not only good results for the environmental sphere but also for the economic one. In the first part, there are found the general targets, which are going to foster the use of these sort of energies. Then, there are shown different kinds of photovoltaic systems. The implementation of these systems have a double target: to improve both activities: stock breeding and agriculture, and to foster the use of renewable energy. Next, there are mentioned the project investors. Similarly, there are described some of the components that are part of such projects along with their corresponding results. Finally, it is given a succinctly explanation about the conclusions as well as the future plans. [Spanish] Esta presentacion principalmente se enfoca en todos los proyectos que se han realizado para el fomento de las energias renovables, teniendo un impacto no solo ambiental sino tambien economico. En la primera parte, se encuentran los objetivos generales que se tienen para fomentar el uso de este tipo de energia. Enseguida, se muestran los diferentes sistemas basados en el uso de energia renovable. La implementacion de estos sistemas tiene un doble objetivo: mejorar de alguna manera la actividad de la ganaderia o de la agricultura, y fomentar el uso de energias renovables. Enseguida, se mencionan los inversionistas que participaron en la realizacion de los proyectos; asimismo, se describen algunos de los elementos, que forman parte de los proyectos, acompanados de sus respectivos resultados obtenidos. Finalmente, se da una breve explicacion de las conclusiones a las que se llegaron, asi como de los planes a futuro.

  18. Conformation of an evaluation process for a license renovation solicitude of a nuclear power plant in Mexico

    International Nuclear Information System (INIS)

    Serrano R, M. L.

    2012-10-01

    So that the construction stages, of operation, closing, dismantlement and the radioactive waste disposal of a nuclear power plant (NPP) are carried out in Mexico, is necessary that the operator has a license, permission or authorization for each stage. In Mexico, these licenses, permissions or authorizations are granted by the Energy Secretariat with base in the verdict of the Comision Nacional de Seguridad Nuclear y Salvaguardias (CNSNS). The operation licenses ar the moment effective for the reactors of the Nuclear Power Plant of Laguna Verde (NPP-L V) they will expire respectively in the year 2020 and 2025 for the Unit 1 and Unit 2, for what the CNSNS has begun its preparation before a potential solicitude of the licensee to continue the operation of the NPP-L V. Defining the process to continue and to generate the documents that would help in this phase as normalization, guides, procedures, regulations, controls, etc., is the task that intends to be carried out the regulator body so that the evaluation process is effective and efficient, so much for the same regulator body as for the licensee. This work exposes the advance that the CNSNS has in this aspect and is centered specifically in the conformation of an evaluation process of license renovation solicitude, taking as base what the regulator body of the United States of North America (US NRC) established and following to the IAEA. Also, this work includes statistical of electric power production in Mexico, licensing antecedents for the NPP-L V, a world perspective of the license renovations and the regulation of the US NRC related to the license renovation of a NPP. (Author)

  19. Design Problems With Renovating And Adapting An Old Mill On The Example Of The Execution Of An Original Project

    Science.gov (United States)

    Grzonka, Aleksandra

    2015-12-01

    Nowadays, postindustrial areas and buildings are becoming more and more valuable. Very popular are those with special historical and architectural values, which are additionally located in large cities. The situation of those possessing fewer attributes encouraging their adaptation is worse. Sometimes, however, there are reasons why a decision is made to invest in such buildings despite the many difficulties connected with the implementation of these investments. This situation was presented on the example of the renovation and adaptation of an old electric mill in Łaziec into a restaurant.

  20. Design Problems With Renovating And Adapting An Old Mill On The Example Of The Execution Of An Original Project

    Directory of Open Access Journals (Sweden)

    Grzonka Aleksandra

    2015-12-01

    Full Text Available Nowadays, postindustrial areas and buildings are becoming more and more valuable. Very popular are those with special historical and architectural values, which are additionally located in large cities. The situation of those possessing fewer attributes encouraging their adaptation is worse. Sometimes, however, there are reasons why a decision is made to invest in such buildings despite the many difficulties connected with the implementation of these investments. This situation was presented on the example of the renovation and adaptation of an old electric mill in Łaziec into a restaurant.