WorldWideScience

Sample records for renewable power sources

  1. Power Electronics as Efficient Interface of Renewable Energy Sources

    DEFF Research Database (Denmark)

    Blaabjerg, Frede; Chen, Zhe; Kjær, Søren Bækhøj

    2004-01-01

    renewable energy conversion system, will play an important part in our future energy supply. But other sources like microturbines, photovoltaics and fuel cell systems may also be serious contributor to the power supply. Characteristically, power electronics will be an efficient and important interface...

  2. Power Electronics as Efficient Interface of Renewable Energy Sources

    DEFF Research Database (Denmark)

    Blaabjerg, Frede; Chen, Zhe; Kjær, Søren Bækhøj

    2004-01-01

    The global electrical energy consumption is steadily rising and consequently there is a demand to increase the power generation capacity. A significant percentage of the required capacity increase can be based on renewable energy sources. Wind turbine technology, as the most cost effective...... renewable energy conversion system, will play an important part in our future energy supply. But other sources like microturbines, photovoltaics and fuel cell systems may also be serious contributor to the power supply. Characteristically, power electronics will be an efficient and important interface...... to the grid and this paper will first briefly discuss three different alternative/ renewable energy sources. Next, various configurations of the wind turbine technology are presented, as this technology seems to be most developed and cost-effective. Finally, the developments and requirements from the grid...

  3. Iceland's renewable power sources

    Energy Technology Data Exchange (ETDEWEB)

    Sverrisdottir, V.

    2000-07-01

    The base of Iceland's natural resource consists of the fish stocks in the sea surrounding the country, the land with its soil and vegetation, enormous quantity of hot and cold spring water and renewable energy resources - both geothermal and hydro. The clean environment of the country, on which food-processing and tourism are based, may also be regarded as one of our most important natural resources. At last but not least the utilization of these resources are based on the highly educated and civilized people living in the country. In terms of the population size, Iceland has considerable untapped reserves of renewable energy. Further harnessing of these reserves for economic and sustainable development is an important task for the future and will probably play a large role in maintaining a high standards of living in Iceland in the near future. In this address I would like to say a few words about Iceland's energy resources, how we have utilized them, the main environmental aspects of the future utilisation and the governmental energy policy. (orig.)

  4. A Flexible Power Electronics Configuration for Coupling Renewable Energy Sources

    Directory of Open Access Journals (Sweden)

    Mattia Filippini

    2015-05-01

    Full Text Available A combination of series, parallel and multilevel power electronics has been investigated as a potential interface for two different types of renewable energy sources and in order to reach higher power levels. Renewable energy sources are typically dispersed in a territory, and sources, like wind and solar, allow small to medium-scale generation of electricity. The configuration investigated in this article aims at adapting the coupling solution to the specific generation characteristics of the renewable energy source to make it fit the electrical network. The configuration consists of a combination of three-phase multilevel converters and single-phase inverters, which are designed to provide flexibility, high power quality and high efficiency. A detailed analysis and simulation is performed to identify the properties in conjunction with the electrical grid requirements and the potential challenges encountered during operation. An optimized operation example of wind generation combined with solar PV generation is presented to exemplify the flexibility and benefits of the proposed configuration.

  5. Renewable power sources. Data to compare; Sources renouvelables d'electricite. Des chiffres pour comparer

    Energy Technology Data Exchange (ETDEWEB)

    Multon, B. [Ecole Normale Superieure, 94 - Cachan (France)

    2003-05-01

    This article makes a status of production, growth and cost data for the different renewable energy sources used for power generation in order to give some elements of comparison between the different fossil, nuclear and renewable energy sources (total installed power, annual growth rate, load factor, service life, power of generator units, investment cost, fuel and maintenance costs, production costs and evolution costs). (J.S.)

  6. Active Power Deficit Estimation in Presence of Renewable Energy Sources

    DEFF Research Database (Denmark)

    Hoseinzadeh, Bakhtyar; Silva, Filipe Miguel Faria da; Bak, Claus Leth

    2015-01-01

    following outage of SMs during cascading events. Therefore, the active power deficit following the disturbance/s may not be properly estimated by existing conventional System Frequency Response (SFR) methods in which the total inertia of the power system is required to be known. In this paper, the actual......The inertia of the power system is reduced in the presence of Renewable Energy Sources (RESs) due to their low or even no contribution in the inertial response as it is inherently available in the Synchronous Machines (SMs). The total inertia of the grid becomes unknown or at least uncertain...... active power deficit is estimated independent of grid inertia, type and number of occurred cascading events after each Load Shedding (LS) stage using shed load amount, pre-shed and post-shed Rate of Change of Frequency (ROCOF). Numerical simulations conducted on IEEE 39 bus standard test system in Dig...

  7. Large Scale Integration of Renewable Power Sources into the Vietnamese Power System

    Science.gov (United States)

    Kies, Alexander; Schyska, Bruno; Thanh Viet, Dinh; von Bremen, Lueder; Heinemann, Detlev; Schramm, Stefan

    2017-04-01

    The Vietnamese Power system is expected to expand considerably in upcoming decades. Power capacities installed are projected to grow from 39 GW in 2015 to 129.5 GW by 2030. Installed wind power capacities are expected to grow to 6 GW (0.8 GW 2015) and solar power capacities to 12 GW (0.85 GW 2015). This goes hand in hand with an increase of the renewable penetration in the power mix from 1.3% from wind and photovoltaics (PV) in 2015 to 5.4% by 2030. The overall potential for wind power in Vietnam is estimated to be around 24 GW. Moreover, the up-scaling of renewable energy sources was formulated as one of the priorized targets of the Vietnamese government in the National Power Development Plan VII. In this work, we investigate the transition of the Vietnamese power system towards high shares of renewables. For this purpose, we jointly optimise the expansion of renewable generation facilities for wind and PV, and the transmission grid within renewable build-up pathways until 2030 and beyond. To simulate the Vietnamese power system and its generation from renewable sources, we use highly spatially and temporally resolved historical weather and load data and the open source modelling toolbox Python for Power System Analysis (PyPSA). We show that the highest potential of renewable generation for wind and PV is observed in southern Vietnam and discuss the resulting need for transmission grid extensions in dependency of the optimal pathway. Furthermore, we show that the smoothing effect of wind power has several considerable beneficial effects and that the Vietnamese hydro power potential can be efficiently used to provide balancing opportunities. This work is part of the R&D Project "Analysis of the Large Scale Integration of Renewable Power into the Future Vietnamese Power System" (GIZ, 2016-2018).

  8. Designing and Testing Energy Harvesters Suitable for Renewable Power Sources

    Science.gov (United States)

    Synkiewicz, B.; Guzdek, P.; Piekarski, J.; Zaraska, K.

    2016-01-01

    Energy harvesters convert waste power (heat, light and vibration) directly to electric power . Fast progress in their technology, design and areas of application (e.g. “Internet of Things”) has been observed recently. Their effectiveness is steadily growing which makes their application to powering sensor networks with wireless data transfer reasonable. The main advantage is the independence from wired power sources, which is especially important for monitoring state of environmental parameters. In this paper we describe the design and realization of a gas sensor monitoring CO level (powered by TEG) and two, designed an constructed in ITE, autonomous power supply modules powered by modern photovoltaic cells.

  9. Analysing Renewable Energy Source Impacts on Power System National Network Code

    Directory of Open Access Journals (Sweden)

    Georgiana Balaban

    2017-08-01

    Full Text Available This paper analyses the impact on renewable energy sources integrated into the Romanian power system on the electrical network operation considering the reduction of electricity consumption with respect to the 1990s. This decrease has led to increased difficulties in integrating the renewable energy sources into the power system (network reinforcements, as well as issues concerning the balance of production/consumption. Following the excess of certain proportions of the energy mix, intermittent renewable energy sources require the expansion of networks, storage, back-up capacities and efforts for a flexible consumption, in the absence of which renewable energy sources cannot be used or the grid can be overloaded. To highlight the difficulty of connecting some significant capacities installed in wind power plants and photovoltaic installation, the paper presents a case study for Dobrogea area that has the most installed capacity from renewable energy sources in operation.

  10. Consideration on a Low Power Solar Energy Renewable Source

    Directory of Open Access Journals (Sweden)

    Andrei Marusca

    2008-05-01

    Full Text Available This paper presents the contribution of theauthors regarding the implementation of a low powersolar energy renewable source. To optimize theconversion efficiency of the solar irradiance intoelectrical energy an embedded system was designed. Theembedded system can accomplish the maximum powerpoint tracking by evaluation the output voltage andcurrent of the photovoltaic panels and calculate a propercommand for the DC-DC converter of the renewablesource. The key device in this system is a midrange 8 bitmicrocontroller that consists of acquisition, commandand control integrated hardware resources.

  11. The integration of renewable energy sources into electric power transmission systems

    Energy Technology Data Exchange (ETDEWEB)

    Barnes, P.R.; Dykas, W.P.; Kirby, B.J.; Purucker, S.L. [Oak Ridge National Lab., TN (United States); Lawler, J.S. [Univ. of Tennessee, Knoxville, TN (United States)

    1995-07-01

    Renewable energy technologies such as photovoltaics, solar thermal power plants, and wind turbines are nonconventional, environmentally attractive sources of energy that can be considered for electric power generation. Many of the areas with abundant renewable energy resources (very sunny or windy areas) are far removed from major load centers. Although electrical power can be transmitted over long distances of many hundreds of miles through high-voltage transmission lines, power transmission systems often operate near their limits with little excess capacity for new generation sources. This study assesses the available capacity of transmission systems in designated abundant renewable energy resource regions and identifies the requirements for high-capacity plant integration in selected cases. In general, about 50 MW of power from renewable sources can be integrated into existing transmission systems to supply local loads without transmission upgrades beyond the construction of a substation to connect to the grid. Except in the Southwest, significant investment to strengthen transmission systems will be required to support the development of high-capacity renewable sources of 1000 MW or greater in areas remote from major load centers. Cost estimates for new transmission facilities to integrate and dispatch some of these high-capacity renewable sources ranged from several million dollars to approximately one billion dollars, with the latter figure an increase in total investment of 35%, assuming that the renewable source is the only user of the transmission facility.

  12. Multi-port power electronic interface for renewable energy sources

    Science.gov (United States)

    Jiang, Wei

    Energy intensive products and services are penetrating people's daily life as well as different sectors of industry during recent decades. Further effort to improve efficiency, reduce green house gas and hazardous particle emission lead to the emergence of the "more electric" concept in several industries including transportation. This trend, however, burdens the aging power system and existing local power networks. To offer a remedy to the problem and a smooth transition to a more reliable, more diverse, and more efficient power grid of the future, the concept of Multi-port Power Electronic Interface (MPEI) for localized power processing is introduced in this dissertation, which interfaces and manages various sources, loads and storages. Different means of integrating multiple sources and storages into the existing power system are studied and evaluated; the six phase-leg structure is chosen to interface five sources/loads: fuel cell, wind turbine, solar cell, battery and utility grid. Partitioning of source-interface and load-interface on a system level as well as analysis and modeling on small signal level are performed. A novel control structure for source-interface is proposed in the design, which forms Controlled Quasi Current Source (CQCS) during the load sharing operation and offers several salient advantages: • Inherent average current-mode control. • Easy share of steady state current/power. • Share of load dynamics for better source protection. Local control loops for various input ports are designed based on linearized system model; controller performance is tuned to accommodate the characteristics of different sources. To maintain a sustainable operation, different modes of operation are defined for MPEI; detailed state-transition with associated events are also defined in each operation mode. Prototype of MPEI is built and control system is implemented digitally in a digital signal processor; steady state and transient performance of MPEI is

  13. Limitation of fusion power plant installation on future power grids under the effect of renewable and nuclear power sources

    Energy Technology Data Exchange (ETDEWEB)

    Takeda, Shutaro, E-mail: takeda.shutarou.55r@st.kyoto-u.ac.jp [Graduate School of Advanced Integrated Studies in Human Survivability, Kyoto University, Kyoto, Kyoto (Japan); Sakurai, Shigeki [Graduate School of Advanced Integrated Studies in Human Survivability, Kyoto University, Kyoto, Kyoto (Japan); Yamamoto, Yasushi [Faculty of Engineering Science, Kansai University, Suita, Osaka (Japan); Kasada, Ryuta; Konishi, Satoshi [Institute of Advanced Energy, Kyoto University, Uji, Kyoto (Japan)

    2016-11-01

    Graphical abstract: - Highlights: • Future power grids would be unstable due to renewable and nuclear power sources. • Output interruptions of fusion plant would cause disturbances to future grids. • Simulation results suggested they would create limitations in fusion installation. • A novel diagram was presented to illustrate this suggested limitation. - Abstract: Future power grids would be unstable because of the larger share of renewable and nuclear power sources. This instability might bring some additional difficulties to fusion plant installation. Therefore, the authors carried out a quantitative feasibility study from the aspect of grid stability through simulation. Results showed that the more renewable and nuclear sources are linked to a grid, the greater disturbance the grid experiences upon a sudden output interruption of a fusion power plant, e.g. plasma disruption. The frequency deviations surpassed 0.2 Hz on some grids, suggesting potential limitations of fusion plant installation on future grids. To clearly show the suggested limitations of fusion plant installations, a novel diagram was presented.

  14. Green power grids: how energy from renewable sources affects network and markets

    CERN Document Server

    Mureddu, Mario; Chessa, Alessandro; Scala, Antonio; Damiano, Alfonso

    2015-01-01

    The increasing attention to environmental issues is forcing the implementation of novel energy models based on renewable sources, fundamentally changing the configuration of energy management and introducing new criticalities that are only partly understood. In particular, renewable energies introduce fluctuations causing an increased request of conventional energy sources oriented to balance energy requests on short notices. In order to develop an effective usage of low-carbon sources, such fluctuations must be understood and tamed. In this paper we present a microscopic model for the description and the forecast of short time fluctuations related to renewable sources and to their effects on the electricity market. To account for the inter-dependencies among the energy market and the physical power dispatch network, we use a statistical mechanics approach to sample stochastic perturbations on the power system and an agent based approach for the prediction of the market players behavior. Our model is a data-d...

  15. Wind Power: A Renewable Energy Source for Mars Transit Vehicle

    Science.gov (United States)

    Flynn, Michael; Kohout, Lisa; Kliss, Mark (Technical Monitor)

    1998-01-01

    The Martian environment presents significant design challenges for the development of power generation systems. Nuclear-based systems may not be available due to political and safety concerns. The output of photovoltaics are limited by a solar intensity of 580 W/sqm as compared to 1353 W/sqm on Earth. The presence of dust particles in the Mars atmosphere will further reduce the photovoltaic output. Also, energy storage for a 12-hour night period must be provided. In this challenging environment, wind power generation capabilities may provide a viable option as a Martian power generation system. This paper provides an analysis of the feasibility of such a system.

  16. Risk factors during construction of power plants using renewable energy sources

    Directory of Open Access Journals (Sweden)

    Nefedova Lyudmila Veniaminovna

    2016-12-01

    Full Text Available The authors consider main characteristics of modern development of renewable energy sources (RES. It is dedicated that there are some technical and economic barriers to the widespread use of renewable energy. For example, RES are inconstancy in time and space and have low density of energy flow. High capital intensity and cost price, long-term construction, a considerable degree of different kinds of risk, lack of competitiveness with hydrocarbon species generation in the existing regulatory environment are also inherent to RES. The role of the regulatory framework is shown according to perspective plans of construction of power plants using renewable energy sources. The main requirements which are applied to measures of state support of construction industry of renewable energy development are formulated. Current condition of construction industry of RES in Russia is assessed. The problems of risks which arise during construction of renewable energy facilities according to results of practical use of RES are discussed. And it is rather important to use stage assessment for the construction phase of the project during risk analysis of construction of alternative energy sources. The main groups of RES risks are described. The importance of regulatory and resource risks for effective development of renewable energy in Russia according to the method of strategic planning with the identification of the adverse effects of gradation factors are determined. The analysis of financial risks types and methods of its management during construction power generation projects based on different types of renewable energy resources are made. In the end of the article the authors make a conclusion, that the development of projects for the construction of power plants with the use of innovative technical solutions to ensure minimal risks to the environment and safe operation in various climatic conditions is a priority.

  17. Stochastic Optimization of Power System Operation in Presence of Renewable Energy Sources

    Directory of Open Access Journals (Sweden)

    Dumbrava V.

    2016-12-01

    Full Text Available The liberalization process of the energy market structure determined significant changes in the electric utility industry, from both generating and transmission perspectives, and new generation technologies emerged, deeply influencing the industry profile. Nowadays, based on the governmental incentives and free access to the power systems, the share of renewable energy sources in the bulk power system generation is increasing. With respect to the classical fuel-based sources, the renewable energy sources (like photovoltaic and wind turbines have an intermittent character determined by the meteorological conditions. Their production cannot be known exactly, but can be forecasted with some degree of accuracy. Thus, within the power system, network measures must be adopted for ensuring its safe operation.

  18. Multifunctional Voltage Source Inverter for Renewable Energy Integration and Power Quality Conditioning

    OpenAIRE

    2014-01-01

    In order to utilize the energy from the renewable energy sources, power conversion system is necessary, in which the voltage source inverter (VSI) is usually the last stage for injecting power to the grid. It is an economical solution to add the function of power quality conditioning to the grid-connected VSI in the low-voltage distribution system. Two multifunctional VSIs are studied in this paper, that is, inductive-coupling VSI and capacitive-coupling VSI, which are named after the fundame...

  19. Green Power Grids: How Energy from Renewable Sources Affects Networks and Markets.

    Directory of Open Access Journals (Sweden)

    Mario Mureddu

    Full Text Available The increasing attention to environmental issues is forcing the implementation of novel energy models based on renewable sources. This is fundamentally changing the configuration of energy management and is introducing new problems that are only partly understood. In particular, renewable energies introduce fluctuations which cause an increased request for conventional energy sources to balance energy requests at short notice. In order to develop an effective usage of low-carbon sources, such fluctuations must be understood and tamed. In this paper we present a microscopic model for the description and for the forecast of short time fluctuations related to renewable sources in order to estimate their effects on the electricity market. To account for the inter-dependencies in the energy market and the physical power dispatch network, we use a statistical mechanics approach to sample stochastic perturbations in the power system and an agent based approach for the prediction of the market players' behavior. Our model is data-driven; it builds on one-day-ahead real market transactions in order to train agents' behaviour and allows us to deduce the market share of different energy sources. We benchmarked our approach on the Italian market, finding a good accordance with real data.

  20. Green Power Grids: How Energy from Renewable Sources Affects Networks and Markets.

    Science.gov (United States)

    Mureddu, Mario; Caldarelli, Guido; Chessa, Alessandro; Scala, Antonio; Damiano, Alfonso

    2015-01-01

    The increasing attention to environmental issues is forcing the implementation of novel energy models based on renewable sources. This is fundamentally changing the configuration of energy management and is introducing new problems that are only partly understood. In particular, renewable energies introduce fluctuations which cause an increased request for conventional energy sources to balance energy requests at short notice. In order to develop an effective usage of low-carbon sources, such fluctuations must be understood and tamed. In this paper we present a microscopic model for the description and for the forecast of short time fluctuations related to renewable sources in order to estimate their effects on the electricity market. To account for the inter-dependencies in the energy market and the physical power dispatch network, we use a statistical mechanics approach to sample stochastic perturbations in the power system and an agent based approach for the prediction of the market players' behavior. Our model is data-driven; it builds on one-day-ahead real market transactions in order to train agents' behaviour and allows us to deduce the market share of different energy sources. We benchmarked our approach on the Italian market, finding a good accordance with real data.

  1. On the physics of power, energy and economics of renewable electric energy sources - Part II

    Energy Technology Data Exchange (ETDEWEB)

    Skoglund, Annika [Dep. of Industrial Economics, Royal Institute of Technology, Lindstedts vaeg 30, 100 44 Stockholm (Sweden); Leijon, Mats; Waters, Rafael [Div. of Electricity, Swedish Centre for Renewable Electric Energy Conversion, Uppsala University, Aangstroem 751 21 Uppsala (Sweden); Rehn, Alf [Dep. of Business Administration, Aabo Akademi University, Henriksgatan 7FIN-20500 Aabo (Finland); Lindahl, Marcus [Div. of Industrial Management, Uppsala University, Aangstroem 751 21 Uppsala (Sweden)

    2010-08-15

    Renewable Energy Technologies (RETs) are often recognized as less competitive than traditional electric energy conversion systems. Obstacles with renewable electric energy conversion systems are often referred to the intermittency of the energy sources and the relatively high maintenance cost. However, due to an intensified discourse on climate change and its effects, it has from a societal point of view, become more desirable to adopt and install CO{sub 2} neutral power plants. Even if this has increased the competitiveness of RETs in a political sense, the new goals for RET installations must also be met with economical viability. We propose that the direction of technical development, as well as the chosen technology in new installations, should not primarily be determined by policies, but by the basic physical properties of the energy source and the associated potential for inexpensive energy production. This potential is the basic entity that drives the payback of the investment of a specific RET power plant. With regard to this, we argue that the total electric energy conversion system must be considered if effective power production is to be achieved, with focus on the possible number of full loading hours and the Degree of Utilization. This will increase the cost efficiency and economical competitiveness of RET investments, and could enhance faster diffusion of new innovations and installations without over-optimistic subsidies. This paper elaborates on the overall problem of the economy of renewable electric energy conversion systems by studying the interface between physics, engineering and economy reported for RET power plants in different scientific publications. The core objective is to show the practical use of the Degree of Utilization and how the concept is crucial for the design and economical optimization disregarding subsidies. The results clearly indicate that the future political regulative frameworks should consider the choice of renewable

  2. On the physics of power, energy and economics of renewable electric energy sources - Part I

    Energy Technology Data Exchange (ETDEWEB)

    Leijon, Mats; Waters, Rafael [Div. of Electricity, Swedish Centre for Renewable Electric Energy Conversion, Uppsala University, Angstroem 751 21 Uppsala (Sweden); Skoglund, Annika [Dep. of Industrial Economics, Royal Institute of Technology Lindstedts vaeg 30, 100 44 Stockholm (Sweden); Rehn, Alf [Dep. of Business Administration, Abo Akademi University, Henriksgatan 7 FIN-20500 Abo (Finland); Lindahl, Marcus [Div. of Industrial Management, Uppsala University, Box 534, Angstroem 751 21 Uppsala (Sweden)

    2010-08-15

    Environmental concerns have increasingly led to the installation of Renewable Energy Technologies (RETs) despite the fact that they are recognized as expensive. Innovative efforts within the area are beset with difficulties, and they are at risk of producing misdirected or insignificant improvements in terms of the cost effectiveness of total energy conversion systems. This paper investigates how RETs can be evaluated, in terms of economy and engineering solutions, by studying the fundamental physics of renewable energy sources and how it matches with the RETs. This match is described by the ''Degree of Utilization''. The findings indicate that new innovations should focus on the possible number of full loading hours. RETs that are correctly matched to their energy source generate a higher amount of electric energy and have a higher potential of becoming more competitive. In cases where this aspect has been ignored, leading to relatively small degrees of utilization, it can be understood as an engineering mismatch between installed power, converted energy, and the fundamental physics of the renewable energy sources. Since there is a strong and possibly biased support for so-called mature RETs and already existing solutions, a clarification of how fundamental physical laws affect the cost of investments and payback of investments is needed. The present paper is part I out of II and it focuses on the difference between power and energy and the physics of different energy sources and their utilization. (author)

  3. Regulation of Renewable Energy Sources to Optimal Power Flow Solutions Using ADMM

    Energy Technology Data Exchange (ETDEWEB)

    Dall-Anese, Emiliano [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Zhang, Yijian [Iowa State University; Hong, Mingyi [Iowa State University; Dhople, Sairaj [University of Minnesota; Xu, Zi [Shanghai University

    2017-07-03

    This paper considers power distribution systems featuring renewable energy sources (RESs), and develops a distributed optimization method to steer the RES output powers to solutions of AC optimal power flow (OPF) problems. The design of the proposed method leverages suitable linear approximations of the AC-power flow equations, and is based on the Alternating Direction Method of Multipliers (ADMM). Convergence of the RES-inverter output powers to solutions of the OPF problem is established under suitable conditions on the stepsize as well as mismatches between the commanded setpoints and actual RES output powers. In a broad sense, the methods and results proposed here are also applicable to other distributed optimization problem setups with ADMM and inexact dual updates.

  4. Regulation of Renewable Energy Sources to Optimal Power Flow Solutions Using ADMM: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Yijian; Hong, Mingyi; Dall' Anese, Emiliano; Dhople, Sairaj; Xu, Zi

    2017-03-03

    This paper considers power distribution systems featuring renewable energy sources (RESs), and develops a distributed optimization method to steer the RES output powers to solutions of AC optimal power flow (OPF) problems. The design of the proposed method leverages suitable linear approximations of the AC-power flow equations, and is based on the Alternating Direction Method of Multipliers (ADMM). Convergence of the RES-inverter output powers to solutions of the OPF problem is established under suitable conditions on the stepsize as well as mismatches between the commanded setpoints and actual RES output powers. In a broad sense, the methods and results proposed here are also applicable to other distributed optimization problem setups with ADMM and inexact dual updates.

  5. Multifunctional Voltage Source Inverter for Renewable Energy Integration and Power Quality Conditioning

    Directory of Open Access Journals (Sweden)

    NingYi Dai

    2014-01-01

    Full Text Available In order to utilize the energy from the renewable energy sources, power conversion system is necessary, in which the voltage source inverter (VSI is usually the last stage for injecting power to the grid. It is an economical solution to add the function of power quality conditioning to the grid-connected VSI in the low-voltage distribution system. Two multifunctional VSIs are studied in this paper, that is, inductive-coupling VSI and capacitive-coupling VSI, which are named after the fundamental frequency impedance of their coupling branch. The operation voltages of the two VSIs are compared when they are used for renewable energy integration and power quality conditioning simultaneously. The operation voltage of the capacitive-coupling VSI can be set much lower than that of the inductive-coupling VSI when reactive power is for compensating inductive loads. Since a large portion of the loads in the distribution system are inductive, the capacitive-coupling VSI is further studied. The design and control method of the multifunctional capacitive-coupling VSI are proposed in this paper. Simulation and experimental results are provided to show its validity.

  6. Multifunctional voltage source inverter for renewable energy integration and power quality conditioning.

    Science.gov (United States)

    Dai, NingYi; Lam, Chi-Seng; Zhang, WenChen

    2014-01-01

    In order to utilize the energy from the renewable energy sources, power conversion system is necessary, in which the voltage source inverter (VSI) is usually the last stage for injecting power to the grid. It is an economical solution to add the function of power quality conditioning to the grid-connected VSI in the low-voltage distribution system. Two multifunctional VSIs are studied in this paper, that is, inductive-coupling VSI and capacitive-coupling VSI, which are named after the fundamental frequency impedance of their coupling branch. The operation voltages of the two VSIs are compared when they are used for renewable energy integration and power quality conditioning simultaneously. The operation voltage of the capacitive-coupling VSI can be set much lower than that of the inductive-coupling VSI when reactive power is for compensating inductive loads. Since a large portion of the loads in the distribution system are inductive, the capacitive-coupling VSI is further studied. The design and control method of the multifunctional capacitive-coupling VSI are proposed in this paper. Simulation and experimental results are provided to show its validity.

  7. Hybrid Design of Electric Power Generation Systems Including Renewable Sources of Energy

    Science.gov (United States)

    Wang, Lingfeng; Singh, Chanan

    2008-01-01

    With the stricter environmental regulations and diminishing fossil-fuel reserves, there is now higher emphasis on exploiting various renewable sources of energy. These alternative sources of energy are usually environmentally friendly and emit no pollutants. However, the capital investments for those renewable sources of energy are normally high,…

  8. Optimal combination of energy storages for prospective power supply systems based on Renewable Energy Sources

    CERN Document Server

    Weitemeyer, Stefan; Siemer, Lars; Agert, Carsten

    2016-01-01

    Prospective power supply systems based on Renewable Energy Sources require measures to balance power generation and load at all times. The utilisation of storage devices and backup power plants is widely suggested for this purpose, whereas the best combination is still to be found. In this work, we present a modelling approach to systematically study scenarios of future power supply systems with a high share of electricity originating from wind and solar resources. By considering backup as a subordinate source of electricity with energy-only costs, the approach is independent of the actual full-load hours of the backup power plants. Applying the approach to multi-year meteorological data for Germany, cost-optimised combinations of storage devices and backup power are identified. We find that even in scenarios with significant excess generation capacities there is a need for storage devices or backup power plants with discharging power on the same order as the average load to balance the system at all times. F...

  9. Current Harmonics Compensation in Microgrids Exploiting the Power Electronics Interfaces of Renewable Energy Sources

    Directory of Open Access Journals (Sweden)

    Ioannis Bouloumpasis

    2015-03-01

    Full Text Available This work presents a method of current harmonic reduction in a distorted distribution system. In order to evaluate the proposed method a grid with high-order current harmonics is assumed. The reduction of current distortion is feasible due to the pulse modulation of an active filter, which consists of a buck-boost converter connected back-to-back to a polarity swapping inverter. For a practical application, this system would be the power electronic interface of a Renewable Energy Source (RES and therefore it changes a source of harmonics to a damping harmonics system. Using the proposed method, the current Total Harmonic Distortion (THD of the grid is reduced below the acceptable limits and thus the general power quality of the system is improved. Simulations in the MATLAB/SIMULINK platform and experiments have been performed in order to verify the effectiveness of the proposed method.

  10. Design of a mediated enzymatic fuel cell to generate power from renewable fuel sources.

    Science.gov (United States)

    Korkut, Seyda; Kilic, Muhammet Samet

    2016-01-01

    The present work reported a compartment-less enzymatic fuel cell (EFC) based on newly synthesized Poly(pyrrole-2-carboxylic acid-co-3-thiophene acetic acid) film containing glucose oxidase and laccase effectively wired by p-benzoquinone incorporated into the copolymer structure. The resulting system generated a power density of 18.8 µW/cm(2) with 30 mM of glucose addition at +0.94 V at room temperature. Improvements to maximize the power output were ensured with step-by-step optimization of electrode fabrication design and operational parameters for operating the system with renewable fuel sources. We demonstrated that the improved fuel cell could easily harvest glucose produced during photosynthesis to produce electrical energy in a simple, renewable and sustainable way by generating a power density of 10 nW/cm(2) in the plant leaf within 2 min. An EFC for the first time was successfully operated in municipal wastewater which contained glycolytic substances to generate electrical energy with a power output of 3.3 µW/cm(2).

  11. Policies for Enabling Corporate Sourcing of Renewable Energy Internationally: A 21st Century Power Partnership Report

    Energy Technology Data Exchange (ETDEWEB)

    Bird, Lori; Heeter, Jenny; O' Shaughnessy, Eric; Speer, Bethany; Volpi, Christina; Cook, Orrin; Jones, Todd; Taylor, Michael; Ralon, Pablo; Nilson, Emily

    2017-05-25

    This paper explores the policy and regulatory enabling environment for corporate sourcing of renewables. The paper has been developed in support of the Corporate Sourcing of Renewables Campaign, which was launched at the Clean Energy Ministerial (CEM) meeting in June 2016. Through the campaign, a subset of CEM member governments is collaborating with corporate and nongovernmental organization partners to facilitate increased corporate procurement of renewables and pursue supportive policies for corporate procurement. This paper finds that policy certainty is essential to creating vibrant markets for renewable energy. While policymakers may need to adjust policy mechanisms over time as markets go through different stages of maturity, they must also consider the economic decisions that end-users make in evaluating projects. Policy interaction is also important to consider because buyers seek assurances that their investments in renewables have impact and wish to make clear claims about their renewable energy purchases.

  12. Integration of Renewable Energy Sources in Future Power Systems: The Role of Storage

    CERN Document Server

    Weitemeyer, Stefan; Vogt, Thomas; Agert, Carsten

    2014-01-01

    Integrating a high share of electricity from non-dispatchable Renewable Energy Sources in a power supply system is a challenging task. One option considered in many studies dealing with prospective power systems is the installation of storage devices to balance the fluctuations in power production. However, it is not yet clear how soon storage devices will be needed and how the integration process depends on different storage parameters. Using long-term solar and wind energy power production data series, we present a modelling approach to investigate the influence of storage size and efficiency on the pathway towards a 100% RES scenario. Applying our approach to data for Germany, we found that up to 50% of the overall electricity demand can be met by an optimum combination of wind and solar resources without both curtailment and storage devices if the remaining energy is provided by sufficiently flexible power plants. Our findings show further that the installation of small, but highly efficient storage devic...

  13. Modeling a drip irrigation system powered by a renewable energy source

    Science.gov (United States)

    Al-Zoheiry, Ahmed M.

    Food production is a problem in many of the regions in the world. Today, the process of producing food is very dependent on energy. The dependency on fossil fuels causes the cost of producing crops to increase as the prices of fuel increases. Using a renewable energy sources to power an irrigation system is a mean of decreasing the dependency of food products on the prices of fuel and minimize the impact of the irrigation system on the environment. A model was developed to simulate and predict the performance of an irrigation system powered by a renewable energy source. Both solar energy and wind energy were considered for the modeling of the system. The solar energy was simulated using the difference between the maximum and the minimum daily temperatures as an indicator of the amount of clouds in the atmosphere. The model is a modification of earlier models and has the advantage of not needing to be calibrated for each new site. Results showed that a model that calibrates it self for the upper and the lower expected values of the solar radiation can be developed using metrological data such as the location of the site, the daily temperatures, and the minimum relative humidity. The wind energy was predicted using the power coefficient of the turbine and statistical representation of the daily wind speeds. The average hourly values of the wind speed were used for finding the distribution constants for the Weibull distribution and Rayleigh distribution. The results showed that the Weibull distribution is more accurate in predicting the expected power output of the turbine when the daily wind speed coefficient of variation (Cv) was less than 0.5. When the Cv is greater than 0.5 the Rayleigh distribution gives better results. A computer model was developed using Visual Basic to model the system and the resulting model was tested and used in comparing the economics of a traditional irrigation system and an irrigation system powered by solar panels. The system powered by

  14. Hybrid Systems of Distributed Generation with Renewable Sources: Modeling and Analysis of Their Operational Modes in Electric Power System

    Directory of Open Access Journals (Sweden)

    A. Gashimov

    2013-01-01

    Full Text Available The paper considers problems pertaining to modeling and simulation of operational hybrid system modes of the distributed generation comprising conventional sources – modular diesel generators, gas-turbine power units; and renewable sources – wind and solar power plants. Operational modes of the hybrid system have been investigated under conditions of electrical connection with electric power system and in case of its isolated operation. As a consequence

  15. Probabilistic evaluation of reserve requirements of generating systems with renewable power sources: The Portuguese and Spanish cases

    Energy Technology Data Exchange (ETDEWEB)

    Matos, Manuel; Lopes, Joao Pecas; Rosa, Mauro; Ferreira, Ricardo [INESC Porto, Fac. Engenharia Univ. do Porto., Campus da FEUP, Rua Dr. Roberto Frias, 378, 4200-465 Porto (Portugal); Leite da Silva, Armando; Sales, Warlley; Resende, Leonidas; Manso, Luiz [Federal University of Itajuba, UNIFEI (Brazil); Cabral, Pedro; Martins, Nuno [Rede Electrica Nacional, REN (Portugal); Ferreira, Marco [REN Servicos, S.A, Divisao de Planeamento de Longo Prazo, Rua Sa da Bandeira, 567-4 , 4000-437 Porto (Portugal); Artaiz, Carlos; Soto, Fernando; Lopez, Ruben [Red Electrica de Espana, REE (Spain)

    2009-10-15

    This paper presents an application of probabilistic methodologies to evaluate the reserve requirements of generating systems with a large penetration of renewable energy sources. The idea is to investigate the behavior of reliability indices, including those from the well-being analysis, when the major portion of the renewable sources comes from wind power and other intermittent sources. A new simulation process to address operating reserve adequacy is introduced, and the correspondent reliability indices are observed. Case studies on the Portuguese and Spanish generating systems are presented and discussed. (author)

  16. Power electronics for renewable energy systems

    DEFF Research Database (Denmark)

    Iov, Florin; Blaabjerg, Frede

    2009-01-01

    sources from the conventional, fossil (and short term) based energy sources to renewable energy resources. Another is to use high efficient power electronics in power generation, power transmission/distribution and end-user application. This paper discuss some of the most emerging renewable energy sources......, wind energy and photovoltaics, which by means of power electronics are changing from being minor energy sources to be acting as important power sources in the energy system....

  17. Different Predictive Control Strategies for Active Load Management in Distributed Power Systems with High Penetration of Renewable Energy Sources

    DEFF Research Database (Denmark)

    Zong, Yi; Bindner, Henrik W.; Gehrke, Oliver

    2013-01-01

    In order to achieve a Danish energy supply based on 100% renewable energy from combinations of wind, biomass, wave and solar power in 2050 and to cover 50% of the Danish electricity consumption by wind power in 2020, it requires more renewable energy in buildings and industries (e.g. cold stores,...... of renewable energy sources, which could lead to reducing reinforcements in the future power systems.......In order to achieve a Danish energy supply based on 100% renewable energy from combinations of wind, biomass, wave and solar power in 2050 and to cover 50% of the Danish electricity consumption by wind power in 2020, it requires more renewable energy in buildings and industries (e.g. cold stores...... and residential sectors, based on dynamic power price and weather forecast, considering users’ comfort settings to meet an optimization objective, such as maximum profit or minimum energy consumption. Some field tests were carried out on a facility for intelligent, active and distributed power systems, which...

  18. Hydro power flexibility for power systems with variable renewable energy sources: an IEA Task 25 collaboration: Hydro power flexibility for power systems

    Energy Technology Data Exchange (ETDEWEB)

    Huertas-Hernando, Daniel [Department of Energy Systems, SINTEF, Trondheim Norway; Farahmand, Hossein [Department of Electric Power Engineering, Norwegian University of Science and Technology (NTNU), Trondheim Norway; Holttinen, Hannele [Department of Energy Systems, VTT Technical Research Centre of Finland, Espoo Finland; Kiviluoma, Juha [Department of Energy Systems, VTT Technical Research Centre of Finland, Espoo Finland; Rinne, Erkka [Department of Energy Systems, VTT Technical Research Centre of Finland, Espoo Finland; Söder, Lennart [Department of Electrical Engineering, KTH University, Stockholm Sweden; Milligan, Michael [Transmission and Grid Integration Group, National Renewable Energy Laboratory' s National Wind Technology Center, Golden CO USA; Ibanez, Eduardo [Transmission and Grid Integration Group, National Renewable Energy Laboratory' s National Wind Technology Center, Golden CO USA; Martínez, Sergio Martín [Department of Electrical Engineering, Electronics, Automation and Communications, Universidad de Castilla-La Mancha, Albacete Spain; Gomez-Lazaro, Emilio [Department of Electrical Engineering, Electronics, Automation and Communications, Universidad de Castilla-La Mancha, Albacete Spain; Estanqueiro, Ana [National Laboratory of Energy and Geology - LNEG, Lisbon Portugal; Rodrigues, Luis [National Laboratory of Energy and Geology - LNEG, Lisbon Portugal; Carr, Luis [Research Association for Energy Economics (FfE GmbH), Munich Germany; van Roon, Serafin [Research Association for Energy Economics (FfE GmbH), Munich Germany; Orths, Antje Gesa [Energinet.dk, Fredericia Denmark; Eriksen, Peter Børre [Energinet.dk, Fredericia Denmark; Forcione, Alain [Hydro Quebec, Montréal Canada; Menemenlis, Nickie [Hydro Quebec, Montréal Canada

    2016-06-20

    Hydro power is one of the most flexible sources of electricity production. Power systems with considerable amounts of flexible hydro power potentially offer easier integration of variable generation, e.g., wind and solar. However, there exist operational constraints to ensure mid-/long-term security of supply while keeping river flows and reservoirs levels within permitted limits. In order to properly assess the effective available hydro power flexibility and its value for storage, a detailed assessment of hydro power is essential. Due to the inherent uncertainty of the weather-dependent hydrological cycle, regulation constraints on the hydro system, and uncertainty of internal load as well as variable generation (wind and solar), this assessment is complex. Hence, it requires proper modeling of all the underlying interactions between hydro power and the power system, with a large share of other variable renewables. A summary of existing experience of wind integration in hydro-dominated power systems clearly points to strict simulation methodologies. Recommendations include requirements for techno-economic models to correctly assess strategies for hydro power and pumped storage dispatch. These models are based not only on seasonal water inflow variations but also on variable generation, and all these are in time horizons from very short term up to multiple years, depending on the studied system. Another important recommendation is to include a geographically detailed description of hydro power systems, rivers' flows, and reservoirs as well as grid topology and congestion.

  19. The effect of real-time pricing on load shifting in a highly renewable power system dominated by generation from the renewable sources of wind and photovoltaics

    Science.gov (United States)

    Kies, Alexander; Brown, Tom; Schlachtberger, David; Schramm, Stefan

    2017-04-01

    The supply-demand imbalance is a major concern in the presence of large shares of highly variable renewable generation from sources like wind and photovoltaics (PV) in power systems. Other than the measures on the generation side, such as flexible backup generation or energy storage, sector coupling or demand side management are the most likely option to counter imbalances, therefore to ease the integration of renewable generation. Demand side management usually refers to load shifting, which comprises the reaction of electricity consumers to price fluctuations. In this work, we derive a novel methodology to model the interplay of load shifting and provided incentives via real-time pricing in highly renewable power systems. We use weather data to simulate generation from the renewable sources of wind and photovoltaics, as well as historical load data, split into different consumption categories, such as, heating, cooling, domestic, etc., to model a simplified power system. Together with renewable power forecast data, a simple market model and approaches to incorporate sector coupling [1] and load shifting [2,3], we model the interplay of incentives and load shifting for different scenarios (e.g., in dependency of the risk-aversion of consumers or the forecast horizon) and demonstrate the practical benefits of load shifting. First, we introduce the novel methodology and compare it with existing approaches. Secondly, we show results of numerical simulations on the effects of load shifting: It supports the integration of PV power by providing a storage, which characteristics can be described as "daily" and provides a significant amount of balancing potential. Lastly, we propose an experimental setup to obtain empirical data on end-consumer load-shifting behaviour in response to price incentives. References [1] Brown, T., Schlachtberger, D., Kies. A., Greiner, M., Sector coupling in a highly renewable European energy system, Proc. of the 15th International Workshop on

  20. PowerStep - Wastewater as source of biomass for renewable energy

    Science.gov (United States)

    Loderer, Christian; Lesjean, Boris; Krampe, Jörg

    2017-04-01

    at operating WWTP sites of different sizes (up to 350,000 pe) and involving various and representative state-of-the-art treatment processes, which underlines both the realistic nature of testing conditions and also the interest of associated partners and utilities in the innovative potential of the investigated technologies and concepts. Within the next three years the following goals should be achieved: • Breakthough innovation: the WWTP will be net energy producer. Wastewater as the last forgotten source of biomass for renewable energy. • No additional needs for power infrastructure, as WWTPs are already well connected in energy supply network and close to power demand (big cities). • First coordinated European project demonstrating energy positive WWTPs as cost effective combination of technological solutions. • Demonstration with first large-scale references: Best practices for next generation WWTPs integrated with global assessment. • Outstanding market and environment impact: Global yearly market value of up 30 Billion, energy cost savings for WWTP operators in Europe of at least €1.7 Billion per year and 5.9 Million tCO2 reduction per year.

  1. Integrated societal risk assessment framework for nuclear power and renewable energy sources

    Directory of Open Access Journals (Sweden)

    Sang Hun Lee

    2015-06-01

    Full Text Available Recently, the estimation of the social cost of energy sources has been emphasized as various novel energy options become feasible in addition to conventional ones. In particular, the social cost of introducing measures to protect power-distribution systems from power-source instability and the cost of accident-risk response for various power sources must be investigated. To account for these risk factors, an integrated societal risk assessment framework, based on power-uncertainty analysis and accident-consequence analysis, is proposed. In this study, we applied the proposed framework to nuclear power plants, solar photovoltaic systems, and wind-turbine generators. The required capacity of gas-turbine power plants to be used as backup power facilities to compensate for fluctuations in the power output from the main power source was estimated based on the performance indicators of each power source. The average individual health risk per terawatt-hours (TWh of electricity produced by each power source was quantitatively estimated by assessing accident frequency and the consequences of specific accident scenarios based on the probabilistic risk assessment methodology. This study is expected to provide insight into integrated societal risk analysis, and can be used to estimate the social cost of various power sources.

  2. Forecast of power generation and heat production from renewable energy sources

    Directory of Open Access Journals (Sweden)

    Pydych Tadeusz

    2017-01-01

    Full Text Available The share of renewable energy sources (RES in the end use of energy in the UE will increase from the present level of about 25% to 50 % in 2030 according to the assumptions of the European Commission. In Poland the RES Act was passed in 2015. The act defines mechanisms and instruments for supporting the production of electricity and heat from renewable energy sources. Statistics (2003–2014 of electricity generation and heat production from RES in Poland were used in the research. Because of amendments to regulations connected with promoting RES and the emissions trading system (ETS as well as the uncertainty associated with further directions of the energy and environmental policy, generation of electricity and heat based on the use of RES must be modelled while taking risk into account. A number of dynamic processes incorporating random events may be modelled by stochastic equations using Ito calculus. By applying Euler’s method to solve stochastic differential equations (SDE, it is possible to simulate the development of the use of renewable energy carriers in electricity generation and heat production in the future.

  3. Power Quality Improvement at Distribution Level for Grid Connected Renewable Energy Sources

    Directory of Open Access Journals (Sweden)

    S. Syed Ahmed

    2014-09-01

    Full Text Available The non-linear load current harmonics may result in voltage harmonics and can create a serious PQ problem in the power system network. Active power filters (APF are extensively used to compensate the load current harmonics and load unbalance at distribution level. This results in an additional hardware cost. However, in this project it has incorporated the features of APF in the conventional inverter interfacing renewable with the grid, without any additional hardware cost. Here, the main idea is the maximum utilization of inverter rating which is most of the time underutilized due to intermittent nature of RES. The grid-interfacing inverter can effectively be utilized to perform the four important functions they are to transfer active power harvested from the renewable resources (wind, solar, etc., load reactive power demand support, current harmonics compensation at PCC and current unbalance and neutral current compensation in case of 3-phase 4-wire system. Moreover, with adequate control of grid-interfacing inverter, all the four objectives can be accomplished either individually or simultaneously. The PQ constraints at the PCC can therefore be strictly maintained within the utility standards without additional hardware cost. With such a control, the combination of grid-interfacing inverter and the 3-phase 4-wire linear/non-linear unbalanced load at point of common coupling appears as balanced linear load to the grid. This new control concept is demonstrated with extensive MATLAB/Simulink simulation studies

  4. New renewable energy sources; Nye fornybare energikilder

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-07-01

    This booklet describes in simple terms the so-called new renewable energy sources: solar energy, biomass, wind power and wave power. In addition, there are brief discussions on hydrogen, ocean thermal energy conversion (OTEC), tidal power, geothermal energy, small hydropower plants and energy from salt gradients. The concept of new renewable energy sources is used to exclude large hydropower plants as these are considered conventional energy sources. The booklet also discusses the present energy use, the external frames for new renewable energy sources, and prospects for the future energy supply.

  5. Power Electronics for Renewable Energy Systems

    DEFF Research Database (Denmark)

    Choi, U. M.; Lee, K. B.; Blaabjerg, Frede

    2012-01-01

    The use of renewable energy sources are increased because of the depletion of natural resources and the increasing pollution level from energy production. The wind energy and the solar energy are most widely used among the renewable energy sources. Power electronics is needed in almost all kinds...... of renewable energy system. It controls the renewable source and interfaces with the load effectively, which can be grid-connected or van work in stand-alone mode. In this presentation, overview of wind and photovoltaic energy systems are introduced. Next, the power electronic circuits behind the most common...

  6. Design of Power Converters for Renewable Energy Sources and Electric Vehicles Charging

    Directory of Open Access Journals (Sweden)

    Martin Tvrdon

    2013-01-01

    Full Text Available This paper describes the design and construction of new series of power converters equipped with liquid cooling system. This power series is created for project ENET – Energy Units for Utilization of non Traditional Energy Sources. First power converter is determined for stationary battery system use, the second one is used as an inverter/rectifier for a small solar plant system and the last power inverter is used as a fast charger for electric vehicles. Energy balance is performed for the fast charger converter, which is solved using numerical simulations of the system.

  7. Integrating renewable energy sources in the Portuguese power system. New generation adequacy indicators

    Energy Technology Data Exchange (ETDEWEB)

    Martins, Nuno; Santos, Joana; Damas, Manuela [Redes Energeticas Nacionais (REN), Porto (Portugal). Studies and Innovation Dept.

    2012-07-01

    The penetration of intermittent energy sources in the Portuguese power system is growing significantly. The identification of possible solutions to maintain the operational reserve levels is necessary to preserve flexibility and security of electricity supply. In this context, the development of probabilistic tools is essential to calculate new generation adequacy indicators associated with the analysis of the operational reserve. In this paper, the mathematical model RESERVAS, is briefly described and is used to analyse the impact of integrating high levels of intermittent energy sources in the Portuguese power system. The presented results allow us to conclude that the electricity adequacy evaluation should be done using probabilistic indicators, which reflect the power system performance in the following areas: (i) Adequacy (evaluation of the available power to face the hourly electricity demand) and (ii) Security (evaluation of the operational reserve requirements through the deviations in the demand-supply balance that occur among all elementary periods). (orig.)

  8. Renewable sources electric power: resources and challenges for the France; Electricite d'origine renouvelable: ressources et enjeux pour la France

    Energy Technology Data Exchange (ETDEWEB)

    Bouchereau, J.M.; Dormoy, C

    2001-05-01

    This paper provides information (statistical data, legal framework) on the electric power produced by the renewable energy sources in France. It explains the associated local economical challenge and the french objectives in the European Union Directive. (A.L.B.)

  9. Potential of renewable and alternative energy sources

    Science.gov (United States)

    Konovalov, V.; Pogharnitskaya, O.; Rostovshchikova, A.; Matveenko, I.

    2015-11-01

    The article deals with application potential of clean alternative renewable energy sources. By means of system analysis the forecast for consumption of electrical energy in Tomsk Oblast as well as main energy sources of existing energy system have been studied up to 2018. Engineering potential of renewable and alternative energy sources is evaluated. Besides, ranking in the order of their efficiency descending is performed. It is concluded that Tomsk Oblast has high potential of alternative and renewable energy sources, among which the most promising development perspective is implementation of gasification stations to save fuel consumed by diesel power stations as well as building wind-power plants.

  10. PROSPECTS OF RENEWED POWER

    Directory of Open Access Journals (Sweden)

    Dizendorf A. V.

    2015-12-01

    Full Text Available The article considers the main types of wind and solar electric installations, and provides a comparative analysis of the renewable energy potential of the Krasnodar region. Currently, humankind cannot live without electricity. Production and consumption of electricity is constantly increasing and the cost of it is constantly becoming more expensive. The cost of oil production (to get oil out of the ground increases. The cost of electricity is going up because the cost of basic materials such as copper is at an unprecedented high. Such alternatives energy sources such as solar and wind are real solutions to these problems, moreover, the cost of "traditional" energy sources will only increase. To date, the most popular and invest renewable energy sources are the solar energy and the wind. The solar energy in the Krasnodar region is more profitable than wind, despite the fact that the production of solar installations is more expensive. But every year, the price of solar energy is being reduced and soon will be equal to the price of wind energy, and science and technology do not stand still, and considering the abundance of sunlight in the Krasnodar region, the solar installation will pay off much faster

  11. Recent Progress in Triboelectric Nanogenerators as a Renewable and Sustainable Power Source

    Directory of Open Access Journals (Sweden)

    Zhiming Lin

    2016-01-01

    Full Text Available The newly developed triboelectric nanogenerators (TENGs provide an excellent approach to convert mechanical energy into electricity, which are mainly based on the coupling between triboelectrification and electrostatic induction. The TENG has the potential of harvesting many kinds of mechanical energies such as vibration, rotation, wind, human motion, and even water wave energy, which could be a new paradigm for scavenging large scale energy. It also demonstrates a possible route towards practical applications for powering electronic devices. This paper presents a comprehensive review of the four modes of TENGs: vertical contact-separation mode, in-plane sliding mode, single-electrode mode, and free-standing triboelectric-layer mode. The performance enhancements of TENGs for harvesting energy as a sustainable power source are also discussed. In addition, recent reports on the hybridized nanogenerator are introduced, which may enable fully self-powered electronic devices. Finally, the practical applications of TENGs for energy harvesting are presented.

  12. Different Predictive Control Strategies for Active Load Management in Distributed Power Systems with High Penetration of Renewable Energy Sources

    DEFF Research Database (Denmark)

    Zong, Yi; Bindner, Henrik W.; Gehrke, Oliver

    2013-01-01

    is built around a small power grid with renewable power generations (two wind turbines and solar panels), a vanadium battery for storage, EV-charging infrastructure for EVs, and an intelligent office building. The simulation and field tests demonstrated that GA-based and MPC-based predictive control......In order to achieve a Danish energy supply based on 100% renewable energy from combinations of wind, biomass, wave and solar power in 2050 and to cover 50% of the Danish electricity consumption by wind power in 2020, it requires more renewable energy in buildings and industries (e.g. cold stores...

  13. Modularized multilevel and z-source power converter as renewable energy interface for vehicle and grid-connected applications

    Science.gov (United States)

    Cao, Dong

    Due the energy crisis and increased oil price, renewable energy sources such as photovoltaic panel, wind turbine, or thermoelectric generation module, are used more and more widely for vehicle and grid-connected applications. However, the output of these renewable energy sources varies according to different solar radiation, wind speed, or temperature difference, a power converter interface is required for the vehicle or grid-connected applications. Thermoelectric generation (TEG) module as a renewable energy source for automotive industry is becoming very popular recently. Because of the inherent characteristics of TEG modules, a low input voltage, high input current and high voltage gain dc-dc converters are needed for the automotive load. Traditional high voltage gain dc-dc converters are not suitable for automotive application in terms of size and high temperature operation. Switched-capacitor dc-dc converters have to be used for this application. However, high voltage spike and EMI problems exist in traditional switched-capacitor dc-dc converters. Huge capacitor banks have to be utilized to reduce the voltage ripple and achieve high efficiency. A series of zero current switching (ZCS) or zero voltage switching switched-capacitor dc-dc converters have been proposed to overcome the aforementioned problems of the traditional switched-capacitor dc-dc converters. By using the proposed soft-switching strategy, high voltage spike is reduced, high EMI noise is restricted, and the huge capacitor bank is eliminated. High efficiency, high power density and high temperature switched-capacitor dc-dc converters could be made for the TEG interface in vehicle applications. Several prototypes have been made to validate the proposed circuit and confirm the circuit operation. In order to apply PV panel for grid-connected application, a low cost dc-ac inverter interface is required. From the use of transformer and safety concern, two different solutions can be implemented, non

  14. Osmotic power. A great energy source for renewable energy; Una gran fuente de energia renovable para electricidad. Potencia osmotica

    Energy Technology Data Exchange (ETDEWEB)

    Alonso Alvarez, J.

    2009-07-01

    When freshwater meets saltwater, for example, where a river flows out into the sea, enormous quantities of energy can be utilised to generate power, through the natural phenomenon of osmosis. Osmotic power is based on the natural phenomenon of osmosis, defined as the transport of water through a semi-permeable membranes, enclosing their cells, and tho produce osmotic power one has to design similar, artificial membranes. In an osmotic power plant we feed freshwater into separate chambers, separated by an artificial membranes. The salt molecules in the seawater then draw the freshwater through the membranes, causing the pressure on the seawater side to increase. This pressure corresponds to a water column of 120 meters or a large waterfall, and can be utilised in a turbine which generated electricity. The idea to generate power through osmosis is originates from the 1970s. At the time, however, the membranes had low efficiency and power price were too low to enable anyone to profitable invest in such a project. many years later, research scientists al SINTEF brought the idea to STAT kraft. The collaboration was initiated in 1997, and the development of a new, renewable energy source was initiated. (Author)

  15. Renewable Energy Sources for Electricity Generation

    OpenAIRE

    Norrga, Staffan; Stridh, Bengt; Meier, Stephan; Nee, Hans-Peter

    2012-01-01

    The use of conventional energy sources for electricity generation, such as fossil fuel combustion and nuclear power, is questioned because of environmental and safety issues and concerns about possible anthropogenic climate change. This has led to rapid developments in the field of renewable energy exploitation. Entire new fast-growing industries are formed to supply equipment for renewable power plants. The contribution from Swedish industry to this development has so far largely been limite...

  16. Modeling of renewable hybrid energy sources

    Directory of Open Access Journals (Sweden)

    Dumitru Cristian Dragos

    2009-12-01

    Full Text Available Recent developments and trends in the electric power consumption indicate an increasing use of renewable energy. Renewable energy technologies offer the promise of clean, abundant energy gathered from self-renewing resources such as the sun, wind, earth and plants. Virtually all regions of the world have renewable resources of one type or another. By this point of view studies on renewable energies focuses more and more attention. The present paper intends to present different mathematical models related to different types of renewable energy sources such as: solar energy and wind energy. It is also presented the validation and adaptation of such models to hybrid systems working in geographical and meteorological conditions specific to central part of Transylvania region. The conclusions based on validation of such models are also shown.

  17. Influence of macro and micro economical environments of energetical effectiveness for business activity of renewable power sources in the Slovakia

    Directory of Open Access Journals (Sweden)

    Mária Antošová

    2010-07-01

    Full Text Available Goal of the contribution is to explain evaluation of economical environment that firms must respect during their business activity.External environment of mining firm includes except others technological development, economical situation, legislative by the wayof regulation, but in last time also stimulations from the government, competition behavior and other. Contribution is dealing also withenergetical effectiveness in the frame of economical evaluation applied in conditions of Slovak republic.The renewable energy sources are domestic sources of energy that help to enhance the safety of energy suppliesand the diversification of energy sources. The renewable energy is proved to be commercially viable for a growing list of consumersand uses. The renewable energy technologies provide many benefits that go well beyond the energy alone. More and more,the renewable energies contribute to the three pillars of the sustainable development in the economy, environment and the society.

  18. Power marketing and renewable energy

    Energy Technology Data Exchange (ETDEWEB)

    Fang, J.M.

    1997-09-01

    Power marketing refers to wholesale and retail transactions of electric power made by companies other than public power entities and the regulated utilities that own the generation and distribution lines. The growth in power marketing has been a major development in the electric power industry during the last few years, and power marketers are expected to realize even more market opportunities as electric industry deregulation proceeds from wholesale competition to retail competition. This Topical Issues Brief examines the nature of the power marketing business and its relationship with renewable power. The information presented is based on interviews conducted with nine power marketing companies, which accounted for almost 54% of total power sales by power marketers in 1995. These interviews provided information on various viewpoints of power marketers, their experience with renewables, and their respective outlooks for including renewables in their resource portfolios. Some basic differences exist between wholesale and retail competition that should be recognized when discussing power marketing and renewable power. At the wholesale level, the majority of power marketers stress the commodity nature of electricity. The primary criteria for developing resource portfolios are the same as those of their wholesale customers: the cost and reliability of power supplies. At the retail level, electricity may be viewed as a product that includes value-added characteristics or services determined by customer preferences.

  19. STAND-ALONE POWER SUPPLY SYSTEM BASED ON RENEWABLE ENERGY SOURCES

    Directory of Open Access Journals (Sweden)

    Grigorash O. V.

    2013-11-01

    Full Text Available The article discusses a promising direction, aimed at improving the operational and technical characteristics of the autonomous power supply systems, through the use of a part of their gas piston power plants, wind pow-er and solar photovoltaic installations

  20. Power Electronics and Control of Renewable Energy Systems

    DEFF Research Database (Denmark)

    Iov, Florin; Ciobotaru, Mihai; Sera, Dezso

    2007-01-01

    sources from the conventional, fossil (and short term) based energy sources to renewable energy resources. Another is to use high efficient power electronics in power generation, power transmission/distribution and end-user application. This paper discuss some of the most emerging renewable energy sources......, wind energy and photovoltaics, which by means of power electronics are changing from being minor energy sources to be acting as important power sources in the energy system....

  1. Regional power supply with decentral and renewable energy sources; Regionale Energieversorgung mit dezentralen und erneuerbaren Energien

    Energy Technology Data Exchange (ETDEWEB)

    Bonow, Martin [Genossenschaftsverband, Neu-Isenburg/Zeppelinheim-Ost (Germany); George, Wolfgang [GenoPortal, Neu-Isenburg (Germany); Klement, Martin [Kassel Univ. (Germany). Fachbereich 6 - Architektur, Stadtplanung, Landschaftsplanung

    2009-04-15

    The contribution starts by assuming a region as a business organisation; on this basis, the authors develop the idea of a regional value-adding chain with regard to regional power supply. After presenting the central actors and their manner of integration, the contribution discusses concepts for sustainable power supply as well as the central parameters of such a development in terms of quality of life, attractivity of the region, future success of technologies, and criteria of value-adding. Finally, the implementation of regional power supply with the aid of a so-called 'balanced scorecard' is explained, which involves balancing of the various perspectives of the process up to the establishment of the final regional power supply concept. Finally, the contribution briefly discusses co-operative models for the establishment of a regional power supply concept. (orig.)

  2. Power Electronics and Control of Renewable Energy Systems

    DEFF Research Database (Denmark)

    Iov, Florin; Ciobotaru, Mihai; Sera, Dezso

    2007-01-01

    sources from the conventional, fossil (and short term) based energy sources to renewable energy resources. Another is to use high efficient power electronics in power generation, power transmission/distribution and end-user application. This paper discuss some of the most emerging renewable energy sources...

  3. Renewable energy sources; Erneuerbare Energien

    Energy Technology Data Exchange (ETDEWEB)

    Lenz, Volker [Deutsches BiomasseForschungsZentrum gGmbH (DBFZ), Leipzig (Germany); Kaltschmitt, Martin [Technische Univ. Hamburg-Harburg, Hamburg (Germany). Inst. fuer Umwelttechnik und Energiewirtschaft

    2012-07-01

    The development of the use of renewable energy sources in Germany in 2011 significantly was influenced by the disaster in Fukushima (Japan) and the change of course in the German energy policy. In addition, there is the amendment of the Renewable Energy Law (EEG) in an increasingly controversial area of tension between climate protection, energy utilization, cost minimization and considerations on sustainability. With this in mind, the authors of the contribution under consideration report on developments in Germany in the year 2011 in the field of energy supply and fuel supply from renewable energies. Beside the energy-economic framework conditions for the various possibilities for the use of renewable energies, the current status, developments and prospects are analysed. The contribution gives an outlook on the possible expansion of the supply of renewable energies in 2012.

  4. Small Hydro Power-An Important Renewable Energy Sources for Rural Electrification in Nigeria

    Institute of Scientific and Technical Information of China (English)

    MamudaAbdullahi

    2005-01-01

    This paper is trying to highlight the importance of constructing small hydropower station as the alternative source of energy for rural electrification in Nigeria and stressedthe need for the Federal Government of Nigeria to provide a clear open policy that will make environment favourable and safe for local and foreign private investors on small Hydropower.

  5. Solar belt and wind farm oasis. Which portion have renewable energy sources at the power generation in Chile?; Sonnenguertel und Windparkoasen. Welchen Anteil haben Erneuerbare Energien an der Stromerzeugung in Chile?

    Energy Technology Data Exchange (ETDEWEB)

    Abarzua, Tatiana [DGS, Berlin (Germany)

    2012-05-15

    The author of the contribution under consideration reports on the portion of renewable energies at the power generation in Chile. The technically usable potential of renewable energy sources (hydroelectric power plants, photovoltaic systems, wind power plant, geothermal power plants, biogas plants, ocean energy systems) as well as the already approved photovoltaic systems are presented.

  6. Use of Hydrogen from Renewable Energy Source for Powering Hot-Mix Asphalt Plant

    Directory of Open Access Journals (Sweden)

    Kasthurirangan Gopalakrishnan

    2012-03-01

    Full Text Available A significant portion of paved roads and highways are surfaced with Hot-Mix Asphalt. Environmental Life-Cycle Assessment studies have shown that, in the production of Hot-Mix Asphalt pavements, major consumption of energy takes place during asphalt mixing and drying of aggregates, more than what is consumed during the extraction of crude oil and the distillation of bitumen. Currently, natural gas is the primarily source of fossil fuel used to produce 70 to 90 percent of the Hot-Mix Asphalt in the USA, while the remainder of the Hot-Mix Asphalt is produced using oil, propane, waste oil, or other fuels. Energy-related CO2 emissions resulting from the use of fossil fuels in various industry and transportation sectors represent a significant portion of human-made greenhouse gas emissions. This study investigates the technical feasibility of using a hybrid wind energy system as a clean source of energy for operating an entire Hot-Mix Asphalt production facility. Since wind blows intermittently, the extracted wind energy will be stored in the form of hydrogen which is considered a lightweight, compact energy carrier, for later use, thus creating a ready source of electricity for the Hot-Mix Asphalt plant when wind is not present or when electricity demand is high.

  7. FPGA-based real-time simulation of power converters of renewable energy sources

    Energy Technology Data Exchange (ETDEWEB)

    Kokenyesi, Tamas; Varjasi, Istvan [Budapest University of Technology and Economics, Department of Automation and Applied Informatics (Hungary)], e-mail: kokenyesi.tamas@gmail.com, email: varjasi@aut.bme.hu

    2011-07-01

    This paper presents a hardware-in-the-loop testing (HIL) approach based on a field programmable gate array (FPGA) real-time simulation with real measured signals designed to reduce the cost and time for testing the main circuit of a power converter significantly. This method allows the control unit to measure its outputs on the same signal level in a completely transparent way, unlike other computer based simulation methods. As an example, a simulator for a three-phase inverter used for DC/AC conversion or frequency control is described and the simulated network illustrated. The calculation procedure and relative equations are also detailed, with simulation parameters and some measurement results being presented. It was found that the main advantage of this method is speed, which was only limited by the actual capabilities of the FPGA used. This method can be applied to a wide variety of analog circuits, reducing time to market. More complex circuits and higher frequencies could be simulated in the future with the evolution of FPGAs.

  8. Performance of Generating Plant: Managing the Changes. Supporting paper: The evolution of the electricity sector and renewable sources in Italy: opportunities and problems for wind power integration

    Energy Technology Data Exchange (ETDEWEB)

    Salvaderi, Luigi [IEEE Fellow (Italy)

    2008-05-15

    The WEC Committee on the Performance of Generating Plant (PGP) has been collecting and analysing power plant performance statistics worldwide for more than 30 years and has produced regular reports, which include examples of advanced techniques and methods for improving power plant performance through benchmarking. A series of reports from the various working groups was issued in 2008. This document serves as a supporting paper. Sections include: features of Italian energy and electricity; the evolution of liberalisation; support mechanism for renewables; connection to wind farm transmission network; wind source integration into power system; and, final comments.

  9. Promotion of direct marketing and supply on demand of electric power from renewable energy sources. Final report; Foerderung der Direktvermarktung und der bedarfsgerechten Einspeisung von Strom aus Erneuerbaren Energien. Endbericht

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2010-06-23

    The study investigates the promotion of direct marketing and supply on demand of electric power from renewable energy sources in Germany. the study shows that renewable energy sources are a good option for facing the challenges of the future. However, the potential is often left unused because of a lack of incentives in the current pricing system. To solve this problem, the Federal Ministry of the Environment, Nature Conservation and Nuclear Safety authorized two studies that are to enable or improve the utilization of the integration potentials of the renewable energy sources. Two model proposals based on these studies are presented here. The model proposing a bonus for combined-cycle power plants is to ensure supply on demand of electric power from renewables with the aid of integrated power storage systems. However, it is found that this model will not generate significant effects for power supply on demand. The second model proposes financial incentives; it will work well for renewable power supply systems that can be controlled, e.g. bioenergy, run-of-river power plants with power storage, and biogas plants. On the other hand, supply-dependent technologies like wind power, photovoltaic power, run-of-river power plants without power storage, and geothermal power plants with very low variable cost, the goal is not fully reached. In contrast to the first model, the market incentives model will enhance the integration of renewable energy sources in the competitive market by largely eliminating market risks. (orig./RHM)

  10. Renewable energy sources 1991, part 3

    Science.gov (United States)

    Michalicka, L.

    1991-12-01

    The Fourth International Conference on Renewable Energy Sources was held at Prague Technical University from 1-4 Jul. 1991. Part 3 of the proceedings contains a report on the conference and 10 contributions, of which 2 were inputted in INIS: one deals with the economic problems of wind-, solar- and oil-driven water pumps, the other deals with the decrease in sunshine brought about by the operation of Czechoslovak nuclear power plants.

  11. Renewable energy sources 1991, part 2

    Science.gov (United States)

    Michalicka, L.

    1991-12-01

    The International Conference on Renewable Energy Sources was held in Prague on 1-4 Jul. 1991. Part 2 of the proceedings is devoted to the use of the energy of wind, biogas, and small hydroelectric sources. The publication contains 14 contributions, of which 3 were inputted in INIS. Topics covered include: a wind power plant in Sweden and its environmental impacts, economic aspects of the introduction of alternative energy sources in Czechoslovakia, and the efficiency of application of a Fresnel lens-based solar collector.

  12. Report on power consumption from renewable energy sources in France; Rapport sur la consommation d'electricite produite a partir de sources d'energie renouvelable en France

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2006-03-15

    This report presents an analysis of the realization of the national objectives of domestic consumption of electricity of renewable origin. Conformably with article 3 of the European directive no 2001/77/CE from September 27, 2001, it takes into account the climatic factors susceptible to interfere with the realization of the objectives and indicates to what extent the actions implemented are conformable with the national commitment of France in the domain of climatic change. Content: national objectives and tools for the sustained development of renewable energy sources (programs, investments, financial incentives, environmental policy), power consumption of renewable origin in 2004 (demand factors, evolution of renewable power generation between 1997 and 2004), 2005 highlights. (J.S.)

  13. The RenewElec Project: Variable Renewable Energy and the Power System

    Energy Technology Data Exchange (ETDEWEB)

    Apt, Jay

    2014-02-14

    Variable energy resources, such as wind power, now produce about 4% of U.S. electricity. They can play a significantly expanded role if the U.S. adopts a systems approach that considers affordability, security and reliability. Reaching a 20-30% renewable portfolio standard goal is possible, but not without changes in the management and regulation of the power system, including accurately assessing and preparing for the operational effects of renewable generation. The RenewElec project will help the nation make the transition to the use of significant amounts of electric generation from variable and intermittent sources of renewable power.

  14. Perspectives on renewable energy and Village Power

    Energy Technology Data Exchange (ETDEWEB)

    Hoffman, A.R.

    1997-12-01

    The author provides a brief overview of the role the Department of Energy has been playing in the area of renewable energy sources and their applications at a village level. Energy demand is rising sharply, and shortages are becoming more acute. Developing countries will present a large demand, and market opportunity over the next 40 years. Environmental concerns are a factor in the choice for what sources to promote and develop. The author touches on the features of renewable sources which makes them attractive to DOE for some applications, and what the goals of the department are in supporting this technology. Examples of applications at the level of village power are presented for both the US and abroad.

  15. Hot Thermal Storage in a Variable Power, Renewable Energy System

    Science.gov (United States)

    2014-06-01

    where cost effective, increase the utilization of distributed electric power generation through wind, solar, geothermal , and biomass renewable...molten salt. On a grid scale, off-peak electricity, converted by ohmic heating, and thermal energy from a concentrated solar power (CSP) plant ...heat energy originating from renewable sources explored. These heat sources are waste heat from the chilling plant , wind electric power from the wind

  16. Growing power : renewable natural gas

    Energy Technology Data Exchange (ETDEWEB)

    Kotelko, M. [Highmark Renewables, Vegreville, AB (Canada)

    2006-07-01

    This presentation described the sustainable production practices used at Alberta's Highland Feeders Ltd., one of Canada's largest cattle feeding operations. In particular, it presented an integrated manure utilization system (IMUS) technology developed by the Alberta Research Council and licensed to Highmark Renewables, a subsidiary of Highland Feeders. The rapidly expanding livestock industry in Canada presents challenges and opportunities for the proper treatment and use of large quantities of manure. With IMUS technology, methane gas produced by livestock operations can be harnessed to produce electricity, as demonstrated at Highmark Renewables' pilot plant which processes solid feedlot manure to produce electricity. The sustainable manure management process has major implications for intensive livestock operations. In addition to generating biogas for use in a cogeneration plant, the IMUS technology provides a value-added soil amendment. Raw manure is placed in a hopper and fed into anaerobic digester tanks. The dry solid by-product is a bio-based, nutrient rich fertilizer, while the liquid component can be recycled for irrigation water. The cogeneration plant will produce electricity for cattle feeding operations, with surplus power sold to the Alberta power grid. The benefits from IMUS include lower manure handling costs; protection of water resources; odour reduction; recycling of waste water; lower energy costs; and, value-added revenue from the sale of energy and bio-based fertilizer. tabs., figs.

  17. Automation infrastructure and operation control strategy in a stand-alone power system based on renewable energy sources

    Science.gov (United States)

    Ziogou, Chrysovalantou; Ipsakis, Dimitris; Elmasides, Costas; Stergiopoulos, Fotis; Papadopoulou, Simira; Seferlis, Panos; Voutetakis, Spyros

    The design of the automation system and the implemented operation control strategy in a stand-alone power system in Greece are fully analyzed in the present study. A photovoltaic array and three wind generators serve as the system main power sources and meet a predefined load demand. A lead-acid accumulator is used to compensate the inherent power fluctuations (excess or shortage) and to regulate the overall system operation, based on a developed power management strategy. Hydrogen is produced by using system excess power in a proton exchange membrane (PEM) electrolyzer and is further stored in pressurized cylinders for subsequent use in a PEM fuel cell in cases of power shortage. A diesel generator complements the integrated system and is employed only in emergency cases, such as subsystems failure. The performance of the automatic control system is evaluated through the real-time operation of the power system where data from the various subsystems are recorded and analyzed using a supervised data acquisition unit. Various network protocols were used to integrate the system devices into one central control system managing in this way to compensate for the differences between chemical and electrical subunits. One of the main advantages is the ability of process monitoring from distance where users can perform changes to system principal variables. Furthermore, the performance of the implemented power management strategy is evaluated through simulated scenarios by including a case study analysis on system abilities to meet higher than expected electrical load demands.

  18. Wind, hydro or mixed renewable energy source

    DEFF Research Database (Denmark)

    Yang, Yingkui; Solgaard, Hans Stubbe; Haider, Wolfgang

    2016-01-01

    While the share of renewable energy, especially wind power, increases in the energy mix, the risk of temporary energy shortage increases as well. Thus, it is important to understand consumers' preference for the renewable energy towards the continuous growing renewable energy society. We use...

  19. Renewable energy sources offering flexibility through electricity markets

    DEFF Research Database (Denmark)

    Soares, Tiago

    All over the world, penetration of renewable energy sources in power systems has been increasing, creating new challenges in electricity markets and for operation and management of power systems, since power production from these resources is by nature uncertain and variable. New methods and tools...... governments. Renewable energy sources are characterized by their uncertain and variable production that limits the current operation and management tools of the power system. Nevertheless, recent developments of renewable energy technologies enable these resources to provide, to some extent, ancillary...... of future energy and reserve markets. Towards a power system based on distributed energy resources, mainly comprising renewable sources, new operation and management of distribution systems needs to be thought of. In fact, the existing passive distribution grid management does not provide the flexibility...

  20. The Brazilian experience of incentive of renewable sources expansion by means of electric power auctions; A experiencia brasileira de incentivo a expansao das fontes renovaveis por meio de leiloes de energia eletrica

    Energy Technology Data Exchange (ETDEWEB)

    Viana, Alexandre Guedes [Camara de Comercializacao de Energia Eletrica (CCEE), Sao Paulo, SP (Brazil); Parente, Virginia [Universidade de Sao Paulo (USP), SP (Brazil)

    2010-07-01

    The aim of this paper is to present the Brazilian experience to encourage renewable sources of power generation through the auctions into the Regulated Environment of Contracting. These auctions are subdivided into auctions of existing plants, new plants, alternative sources and structural plants. In this process we observe the structure of the mechanism for contracting new projects of renewable sources without neglecting the low tariffs issues. Thus, the auctions of electricity in Brazil is an alternative to be considered in an attempt to group market mechanisms, low tariffs and incentives to renewable sources of generation. (author)

  1. Trends in Power Electronics and Control of Renewable Energy Systems

    DEFF Research Database (Denmark)

    Blaabjerg, Frede; Iov, Florin; Kerekes, Tamas

    2010-01-01

    term) based energy sources to renewable energy sources. Another is to use high efficient power electronics in power generation, power transmission/distribution and end-user application. This paper discuss trends of the most emerging renewable energy sources, wind energy and photovoltaics, which...... by means of power electronics are changing the future electrical infrastructure but also contributes steadily more to non-carbon based electricity production. Most focus is on the power electronics technologies used. In the case of photovoltaics transformer-less systems are discussed as they have...

  2. Policy Enabling Environment for Corporate Renewable Energy Sourcing

    Energy Technology Data Exchange (ETDEWEB)

    2017-05-09

    Interest in renewable energy (RE) procurement in new markets is on the rise. Corporations are increasing their commitments to procuring RE, motivated by an interest in using clean energy sources and reducing their energy expenses. Many large companies have facilities and supply chains in multiple countries, and are interested in procuring renewable energy in the grids where they use energy. The policy environment around the world plays a key role in shaping where and how corporations will invest in renewables. This fact sheet details findings from a recent 21st Century Power Partnership report, Policies to Enable Corporate Renewable Energy Sourcing Internationally.

  3. Decreasing demand for base load. Impact of renewable fluctuating power sources on the power plant fleet; Sinkendes Grundlastband. Effekte fluktuierender regenerativer Stromerzeugung auf den Kraftwerkspark

    Energy Technology Data Exchange (ETDEWEB)

    Grosse Boeckmann, Thomas [RGE Energy AG, Berlin (Germany). Bereich Energiemanagement; Wagner, Hermann-Josef [Bochum Univ. (Germany). Inst. fuer Energietechnik

    2010-07-01

    Today, the electricity production from wind and solar energy is a mature technology. It is technically feasible to supply a high share of the German electricity demand from these sources. But the fluctuating power production from wind turbines and photovoltaic plants has strong impacts on the whole power plant fleet. Based upon the power production and electricity demand in Germany, the changing general conditions for the conventional power plants are analyzed. In particular, effects on capacity factor, power dynamics and substitution of controllable capacity by fluctuating sources are described. (orig.)

  4. Wind power - a power source now enabled by power electronics

    DEFF Research Database (Denmark)

    Blaabjerg, Frede; Iov, Florin

    2007-01-01

    energy at the end-user should be set up. Deregulation of energy has lowered the investment in larger power plants, which means the need for new electrical power sources may be increased in the near future. Two major technologies will play important roles to solve the future problems. One is to change...... renewable energy sources, wind energy, which by means of power electronics are changing from being minor energy sources to be acting as important power sources in the energy system....

  5. Power Converters and Control of Renewable Energy Systems

    DEFF Research Database (Denmark)

    Blaabjerg, Frede; Teodorescu, Remus; Chen, Zhe;

    2004-01-01

    The global electrical energy consumption is steadily rising and therefore a continuous demand to increase the power generation capacity. A significant percentage of the required capacity increase can be based on renewable energy sources. Wind turbine technology, as the most cost effective renewable...... energy conversion system, will play an important part in our future energy supply. But other sources like microturbines, photovoltaics and fuel cell systems may also be serious contributor to the power supply. Characteristically, power electronics will be an efficient and important interface to the grid...... for the renewables and this paper will first briefly discuss three different alternative/renewable energy sources. Next, various configurations of small and medium power conversion topologies are presented including their control (mainly for PV-systems). Finally wind turbine configuration and their control...

  6. New renewable energy sources; Nye fornybare energikilder. Revidert utgave 2001

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-06-01

    This publication presents a review of the technological, economical and market status in the field of new renewable energy sources. It also deals briefly with the present use of energy, external conditions for new renewable energy sources and prospects for these energy sources in a future energy system. The renewable energy sources treated here are ''new'' in the sense that hydroelectric energy technology is excluded, being fully developed commercially. This publication updates a previous version, which was published in 1996. The main sections are: (1) Introduction, (2) Solar energy, (3) Bio energy, (4) Wind power, (5) Energy from the sea, (6) Hydrogen, (7) Other new renewable energy technologies and (8) New renewables in the energy system of the future.

  7. Using single-chamber microbial fuel cells as renewable power sources of electro-Fenton reactors for organic pollutant treatment

    KAUST Repository

    Zhu, Xiuping

    2013-05-01

    Electro-Fenton reactions can be very effective for organic pollutant degradation, but they typically require non-sustainable electrical power to produce hydrogen peroxide. Two-chamber microbial fuel cells (MFCs) have been proposed for pollutant treatment using Fenton-based reactions, but these types of MFCs have low power densities and require expensive membranes. Here, more efficient dual reactor systems were developed using a single-chamber MFC as a low-voltage power source to simultaneously accomplish H2O2 generation and Fe2+ release for the Fenton reaction. In tests using phenol, 75±2% of the total organic carbon (TOC) was removed in the electro-Fenton reactor in one cycle (22h), and phenol was completely degraded to simple and readily biodegradable organic acids. Compared to previously developed systems based on two-chamber MFCs, the degradation efficiency of organic pollutants was substantially improved. These results demonstrate that this system is an energy-efficient and cost-effective approach for industrial wastewater treatment of certain pollutants. © 2013 Elsevier B.V.

  8. Using single-chamber microbial fuel cells as renewable power sources of electro-Fenton reactors for organic pollutant treatment.

    Science.gov (United States)

    Zhu, Xiuping; Logan, Bruce E

    2013-05-15

    Electro-Fenton reactions can be very effective for organic pollutant degradation, but they typically require non-sustainable electrical power to produce hydrogen peroxide. Two-chamber microbial fuel cells (MFCs) have been proposed for pollutant treatment using Fenton-based reactions, but these types of MFCs have low power densities and require expensive membranes. Here, more efficient dual reactor systems were developed using a single-chamber MFC as a low-voltage power source to simultaneously accomplish H2O2 generation and Fe(2+) release for the Fenton reaction. In tests using phenol, 75 ± 2% of the total organic carbon (TOC) was removed in the electro-Fenton reactor in one cycle (22 h), and phenol was completely degraded to simple and readily biodegradable organic acids. Compared to previously developed systems based on two-chamber MFCs, the degradation efficiency of organic pollutants was substantially improved. These results demonstrate that this system is an energy-efficient and cost-effective approach for industrial wastewater treatment of certain pollutants. Copyright © 2013 Elsevier B.V. All rights reserved.

  9. Using single-chamber microbial fuel cells as renewable power sources of electro-Fenton reactors for organic pollutant treatment

    Energy Technology Data Exchange (ETDEWEB)

    Zhu, Xiuping [Department of Civil and Environmental Engineering, The Pennsylvania State University, University Park, PA 16802 (United States); Logan, Bruce E., E-mail: blogan@psu.edu [Department of Civil and Environmental Engineering, The Pennsylvania State University, University Park, PA 16802 (United States)

    2013-05-15

    Highlights: ► A new type of electro-Fenton system was developed for wastewater treatment. ► Degradation efficiency of organic pollutants was substantially improved. ► Operation cost was greatly reduced compared to other microbial fuel cell designs. -- Abstract: Electro-Fenton reactions can be very effective for organic pollutant degradation, but they typically require non-sustainable electrical power to produce hydrogen peroxide. Two-chamber microbial fuel cells (MFCs) have been proposed for pollutant treatment using Fenton-based reactions, but these types of MFCs have low power densities and require expensive membranes. Here, more efficient dual reactor systems were developed using a single-chamber MFC as a low-voltage power source to simultaneously accomplish H{sub 2}O{sub 2} generation and Fe{sup 2+} release for the Fenton reaction. In tests using phenol, 75 ± 2% of the total organic carbon (TOC) was removed in the electro-Fenton reactor in one cycle (22 h), and phenol was completely degraded to simple and readily biodegradable organic acids. Compared to previously developed systems based on two-chamber MFCs, the degradation efficiency of organic pollutants was substantially improved. These results demonstrate that this system is an energy-efficient and cost-effective approach for industrial wastewater treatment of certain pollutants.

  10. Polymer biocomposites with renewable sources

    Directory of Open Access Journals (Sweden)

    S. Kuciel

    2010-07-01

    Full Text Available Nowadays production of natural biodegradable polymer composites is an important research topic on the stage of renewable sourcesimplementation instead of petrochemical sources. In this work, possibilities of processing biocomposites on the base on different types of biopolymers – polylactide (PLA, thermoplastic starch (TPS, polyhydroxybutyrate (PHB, cellulose acetate (CA - filled with natural fibers such as wood, kenaf, horse hair and nettle are presented. Large variety of natural fibers and their developed surface which increases adhesion to matrix makes them an attractive filler material. The fibers serve as reinforcement by giving strength and stiffness to the structure while the polymer matrix holds the fibers in place so that suitable structural composites can be made. Main physic-mechanical properties of natural fibers and biopolymers are presented. Modulus of elasticity and tensile strength increased with rising content of natural fibers in composite. The results show that biocomposites based on starch or PHB filled with kenaf fibers has the best mechanical properties. Modulus of elasticity achieves 10-12 GPa and tensile strength 50 MPa. This property can be interesting for packaging especially for fresh food like fruits or vegetables and for technical products with short-time life cycles. In future prospects, biocomposites based on biopolymers with a long time of decomposition can be interesting alternative as a construction material in automotive sectors.

  11. Wind power - a power source now enabled by power electronics

    DEFF Research Database (Denmark)

    Blaabjerg, Frede; Iov, Florin

    2007-01-01

    energy at the end-user should be set up. Deregulation of energy has lowered the investment in larger power plants, which means the need for new electrical power sources may be increased in the near future. Two major technologies will play important roles to solve the future problems. One is to change...... the electrical power production sources from the conventional, fossil (and short term) based energy sources to renewable energy resources. Another is to use high efficient power electronics in power generation, power transmission/distribution and end-user application. This paper discuss the most emerging...... renewable energy sources, wind energy, which by means of power electronics are changing from being minor energy sources to be acting as important power sources in the energy system....

  12. Wind, hydro or mixed renewable energy source: Preference for electricity products when the share of renewable energy increases

    DEFF Research Database (Denmark)

    Yang, Yingkui; Solgaard, Hans Stubbe; Haider, Wolfgang

    2016-01-01

    While the share of renewable energy, especially wind power, increases in the energy mix, the risk of temporary energy shortage increases as well. Thus, it is important to understand consumers' preference for the renewable energy towards the continuous growing renewable energy society. We use...... a discrete choice experiment to infer consumers' preferences when the share of renewable energy increases. The study results indicate that consumers are generally willing to pay extra for an increasing share of renewable energy, but the renewable energy should come from a mixture of renewable energy sources...

  13. The flexibility requirements for power plants with CCS in a future energy system with a large share of intermittent renewable energy sources

    NARCIS (Netherlands)

    Brouwer, A. S.|info:eu-repo/dai/nl/330822748; van den Broek, M.|info:eu-repo/dai/nl/34573260X; Seebregts, A.; Faaij, A. P. C.

    2013-01-01

    This paper investigates flexibility issues of future low-carbon power systems. The short-term power system impacts of intermittent renewables are identified and roughly quantified based on a review of wind integration studies. Next, the flexibility parameters of three types of power plants with CO2

  14. Renewable and efficient electric power systems

    CERN Document Server

    Masters, Gilbert M

    2013-01-01

    A solid, quantitative, practical introduction to a wide range of renewable energy systems-in a completely updated, new edition The second edition of Renewable and Efficient Electric Power Systems provides a solid, quantitative, practical introduction to a wide range of renewable energy systems. For each topic, essential theoretical background is introduced, practical engineering considerations associated with designing systems and predicting their performance are provided, and methods for evaluating the economics of these systems are presented. While the book focuses on

  15. Power Electronics and Reliability in Renewable Energy Systems

    DEFF Research Database (Denmark)

    Blaabjerg, Frede; Ma, Ke; Zhou, Dao

    2012-01-01

    Power Electronics are needed in almost all kind of renewable energy systems. It is used both for controlling the renewable source and also for interfacing to the load, which can be grid-connected or working in stand-alone mode. More and more efforts are put into making renewable energy systems...... better in terms of reliability in order to ensure a high availability of the power sources, in this case the knowledge of mission profile of a certain application is crucial for the reliability evaluation/design of power electronics. In this paper an overview on the power electronic circuits behind...... the most common converter configurations for wind turbine and photovoltaic is done. Next different aspects of improving the system reliability are mapped. Further on examples of how to control the chip temperature in different power electronic configurations as well as operation modes for wind power...

  16. RENEWABLE ENERGY SOURCES IN POLAND - CONDITIONS AND POSSIBILITES OF DEVELOPMENT

    Energy Technology Data Exchange (ETDEWEB)

    Gawlik, L.; Mokrzycki, E.; Ney, R.

    2007-07-01

    The paper describes the state of the art in renewable energy sources development. The obligation resulting from the membership of Poland in the European Union as well as from other international agreements in the scope of renewable energy sources development are described. The production of electricity, heat and biofuels in Poland is given and the perspectives of development of particular renewable energy sources in Poland are discussed in the view of potential reserves and other constrains. The economic aspects of renewable energy technologies are shown. The environmental pros and cons of biomass energy development are described. Arguments for development of renewable energy sources use are stated: the decrease of dependence from primary energy sources, the decrease the emission of green house gases and the recovery of agricultural regions of the country. In conclusion it is stated that the significance of renewable energy sources in Polish conditions is constrained to local societies. Their development should be adjusted to conditions predominating in a given region and that wider consumption of renewable energy sources should develop in conformity with sustainable development, so it is necessary to reach agreement between local societies, institutions dealing with environment protection and representatives of power sector. (auth)

  17. Power generation from renewable energy sources. Climate-friendly and economically efficient. Background information; Stromerzeugung aus erneuerbaren Energien. Klimafreundlich und oekonomisch sinnvoll. Hintergrund

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2011-02-15

    As the publication shows, the public discussion in Germany is increasingly focusing on the cost of the promotion of renewable energy sources. Critical comments state that the EEG (Renewables Act) accounts for most of the recent electricity rate increases and also does not contribute to climate protection. This background paper of the Federal Environmental Office stresses the role of the EEC for climate protection and its effects on price trends in electricity supply. The resulting financial burden for the German citizens and industry is investigated, and it is discussed whether public funding of renewable energy sources is indeed beneficial for the German economy on the whole.

  18. Electrical energy generation in Europe the current situation and perspectives in the use of renewable energy sources and nuclear power for regional electricity generation

    CERN Document Server

    Morales Pedraza, Jorge

    2015-01-01

    The present book maximizes reader insights into the current and future roles to be played by different types of renewable energy sources and nuclear energy for the purpose of electricity generation in the European region as a whole and in a select group of European countries specifically. This book includes detailed analysis of the different types of renewable energy sources available in different European countries; the pros and cons of the use of the different types of renewables and nuclear energy for electricity generation; which energy options are available in the different European coun

  19. State of Charge-Based Active Power Sharing Method in a Standalone Microgrid with High Penetration Level of Renewable Energy Sources

    Directory of Open Access Journals (Sweden)

    Yun-Su Kim

    2016-06-01

    Full Text Available Standalone microgrids, which are mainly constructed on island areas have low system inertia, may result large frequency deviations even for small load change. Moreover, increasing penetration level of renewable energy sources (RESs into standalone microgrids makes the frequency stability problem even worse. To overcome this problem, this paper proposes an active power sharing method with zero frequency deviations. To this end, a battery energy storage system (BESS is operated as constant frequency (CF control mode, whereas the other distributed generations (DGs are operated as an active and reactive power (PQ control mode. As a result, a state of charge (SOC of the BESS is changed as the system load varies. Based on the SOC deviation, DGs share the load change. The SOC data is assumed to be sent via communication system, hence the communication time delay is considered. To enhance reliability, controllers of DGs are designed to take account of the failure of communication system. The simulation results show that active power can be shared among DGs according to desired ratio without frequency deviations even for large variation of output power of RESs.

  20. Unified System-Level Modeling of Intermittent Renewable Energy Sources and Energy Storage for Power System Operation

    DEFF Research Database (Denmark)

    Heussen, Kai; Koch, Stephan; Ulbig, Andreas

    2011-01-01

    in market-based operation. The design of operation strategies for up to 100 % renewable energy systems requires an explicit consideration of non-dispatchable generation and stor- age capacities, as well as the evaluation of operational performance in terms of energy eciency, reliability, environmental...... impact and cost. By abstracting from technology-dependent and physical unit properties, the modeling framework presented and extended in this pa- per allows the modeling of a technologically diverse unit portfolio with a unied approach, whilst establishing the feasibility of energy-storage consideration...

  1. Power Source

    Science.gov (United States)

    Schooley, Michael L.

    2010-01-01

    Principals are powerful: They are the primary catalysts for creating a lasting foundation for learning, driving school and student performance, and shaping the long-term impact of school improvement efforts. Yet few principals would characterize themselves as powerful. Rather, they're self-effacing, adaptable, pragmatic, and quick to share credit…

  2. Life cycle assessment of renewable energy sources

    CERN Document Server

    Singh, Anoop; Olsen, Stig Irving

    2013-01-01

    Governments are setting challenging targets to increase the production of energy and transport fuel from sustainable sources. The emphasis is increasingly on renewable sources including wind, solar, geothermal, biomass based biofuel, photovoltaics or energy recovery from waste. What are the environmental consequences of adopting these other sources? How do these various sources compare to each other? Life Cycle Assessment of Renewable Energy Sources tries to answer these questions based on the universally adopted method of Life Cycle Assessment (LCA). This book introduces the concept and impor

  3. Impedance Source Power Electronic Converters

    DEFF Research Database (Denmark)

    Liu, Yushan; Abu-Rub, Haitham; Ge, Baoming

    Impedance Source Power Electronic Converters brings together state of the art knowledge and cutting edge techniques in various stages of research related to the ever more popular impedance source converters/inverters. Significant research efforts are underway to develop commercially viable...... and technically feasible, efficient and reliable power converters for renewable energy, electric transportation and for various industrial applications. This book provides a detailed understanding of the concepts, designs, controls, and application demonstrations of the impedance source converters/inverters. Key...... control methods. Presents the latest power conversion solutions that aim to advance the role of power electronics into industries and sustainable energy conversion systems. Compares impedance source converter/inverter applications in renewable energy power generation and electric vehicles as well...

  4. Renewable energy sources for sustainable tourism in the Carpathian region

    Science.gov (United States)

    Mandryk, O. M.; Arkhypova, L. M.; Pobigun, O. V.; Maniuk, O. R.

    2016-08-01

    The use of renewable energy in sustainable tourism development of the region is grounded in the paper. There are three stages of selecting areas for projects of renewable energy sources: selection of potentially suitable area; consideration of exclusion criteria, detailed assessment of potential sites or areas. The factors of impact on spatial constraints and opportunities for building wind, solar and small hydro power plants on the parameters of sustainable tourism development in the Carpathian region were determined.

  5. Power electronics - key technology for renewable energy systems

    DEFF Research Database (Denmark)

    Blaabjerg, Frede; Iov, Florin; Kerekes, Tamas

    2011-01-01

    sources to renewable energy sources. Another is to use high efficient power electronics in power generation, power transmission/distribution and end-user application. This paper discuss trends of the most emerging renewable energy sources, wind energy and photovoltaics, which by means of power electronics...... are changing and challenging the future electrical infrastructure but also contributes steadily more to non-carbon based electricity production. Most focus in the paper is on the power electronics technologies used. In the case of photovoltaics transformer-less systems are discussed as they have the potential...... as efficient as possible. Further, the emerging climate changes is arguing to find sustainable future solutions. Of many options, two major technologies will play important roles to solve parts of those future problems. One is to change the electrical power production from conventional, fossil based energy...

  6. Biodegradable plastics from renewable sources.

    Science.gov (United States)

    Flieger, M; Kantorová, M; Prell, A; Rezanka, T; Votruba, J

    2003-01-01

    Plastic waste disposal is a huge ecotechnological problem and one of the approaches to solving this problem is the development of biodegradable plastics. This review summarizes data on their use, biodegradability, commercial reliability and production from renewable resources. Some commercially successful biodegradable plastics are based on chemical synthesis (i.e. polyglycolic acid, polylactic acid, polycaprolactone, and polyvinyl alcohol). Others are products of microbial fermentations (i.e. polyesters and neutral polysaccharides) or are prepared from chemically modified natural products (e.g., starch, cellulose, chitin or soy protein).

  7. Improving long-term operation of power sources in off-grid hybrid systems based on renewable energy, hydrogen and battery

    Science.gov (United States)

    García, Pablo; Torreglosa, Juan P.; Fernández, Luis M.; Jurado, Francisco

    2014-11-01

    This paper presents two novel hourly energy supervisory controls (ESC) for improving long-term operation of off-grid hybrid systems (HS) integrating renewable energy sources (wind turbine and photovoltaic solar panels), hydrogen system (fuel cell, hydrogen tank and electrolyzer) and battery. The first ESC tries to improve the power supplied by the HS and the power stored in the battery and/or in the hydrogen tank, whereas the second one tries to minimize the number of needed elements (batteries, fuel cells and electrolyzers) throughout the expected life of the HS (25 years). Moreover, in both ESC, the battery state-of-charge (SOC) and the hydrogen tank level are controlled and maintained between optimum operating margins. Finally, a comparative study between the controls is carried out by models of the commercially available components used in the HS under study in this work. These ESC are also compared with a third ESC, already published by the authors, and based on reducing the utilization costs of the energy storage devices. The comparative study proves the right performance of the ESC and their differences.

  8. Modeling of an autonomous microgrid for renewable energy sources integration

    DEFF Research Database (Denmark)

    Serban, I.; Teodorescu, Remus; Guerrero, Josep M.

    2009-01-01

    The frequency stability analysis in an autonomous microgrid (MG) with renewable energy sources (RES) is a continuously studied issue. This paper presents an original method for modeling an autonomous MG with a battery energy storage system (BESS) and a wind power plant (WPP), with the purpose...

  9. Cationically polymerizable monomers derived from renewable sources

    Energy Technology Data Exchange (ETDEWEB)

    Crivello, J.V.

    1992-10-01

    The objectives of this project are to design and synthesize novel monomers which orginate from renewable biological sources and to carry out their rapid, efficient, pollution-free and energy efficient cationic polymerization to useful products under the influence of ultraviolet light or heat. A summary of the results of the past year's research on cationically polymerizable monomers derived from renewable sources is presented. Three major areas of investigation corresponding to the different classes of naturally occurring starting materials were investigated; epoxidized terpenes and natural rubber and vinyl ethers from alcohols and carbohydrates.

  10. Cationically polymerizable monomers derived from renewable sources

    Energy Technology Data Exchange (ETDEWEB)

    Crivello, J.V.

    1992-10-01

    The objectives of this project are to design and synthesize novel monomers which orginate from renewable biological sources and to carry out their rapid, efficient, pollution-free and energy efficient cationic polymerization to useful products under the influence of ultraviolet light or heat. A summary of the results of the past year's research on cationically polymerizable monomers derived from renewable sources is presented. Three major areas of investigation corresponding to the different classes of naturally occurring starting materials were investigated; epoxidized terpenes and natural rubber and vinyl ethers from alcohols and carbohydrates.

  11. International Requirements for Large Integration of Renewable Energy Sources

    DEFF Research Database (Denmark)

    Molina-Garcia, Angel; Hansen, Anca Daniela; Muljadi, Ed

    2017-01-01

    Most European countries have concerns about the integration of large amounts of renewable energy sources (RES) into electric power systems, and this is currently a topic of growing interest. In January 2008, the European Commission published the 2020 package, which proposes committing the European...... Union to a 20% reduction in greenhouse gas emissions, to achieve a target of deriving 20% of the European Union's final energy consumption from renewable sources, and to achieve 20% improvement in energy efficiency both by the year 2020 [1]. Member states have different individual goals to meet...

  12. Management of a power system based on renewable energy

    Directory of Open Access Journals (Sweden)

    Ronay Karoly

    2012-06-01

    Full Text Available This article main purpose is to highlight the main advantage of the hardware and software implementation for an energy management system based on renewable energy sources. By using implemented and dedicated hardware and software the evolution of energy production and consumption can be monitored. The advantages of such system are highlighted by the results obtained from experimental simulations. An experimental model for the power system based on renewable energy sources was implemented, where the actual status of the system in different situations when the equipments change their own statuses can be shown.

  13. Renewable energy sources in Europe; Erneuerbare Energien in Europa

    Energy Technology Data Exchange (ETDEWEB)

    Mueller, Thorsten; Kahl, Hartmut (eds.)

    2015-07-01

    The book on renewable energy sources in Europe includes contributions on the following issues: Europe's energy and climate policy on the crossroad; possible promotion of renewable energy in Europe; regulation and innovations in a multi-level system - European energy and climate protection legislation - freedom of action for the member states; lessons learned - in the implementation of the European renewable energy guideline; Options for the development of the renewable energy guideline; status and development of the legal system of the energy domestic market; actual developments in the legislation of the EuGH on the compatibility of green electricity promotion systems with free movement on goods; Europe without critical power situations; prerequisites and consequences of a European electricity market coupling; selected grants of the EU commission for green energy promotion; assistance guidelines of the EU commission for energy and environment purposes.

  14. Impact of renewable power market penetration on coal power generation capacity growth

    Institute of Scientific and Technical Information of China (English)

    ABDUL Majeed Aziz; R.Larry Grayson; VLADISLAV Kecojevic

    2011-01-01

    Since renewable energy sources are growing in importance, how well they can penetrate the energy market for power generation will be a very important factor in the role the coal industry will play in the future. This paper examined the displacement of coal power plant capacity from 2010 to 2050 by renewables with respect to three drivers assumed under various conditions: the American Recovery and Reinvestment Act (ARRA), Greenhouse Gas (GHG) policy, and varying plant capital cost cases. The results by 2050 illustrate that renewable market penetration captures anywhere from 1.9% to 6.4% of potential coal power generation capacity additions. Renewable power generation capacity additions is expected to outpace coal power plant additions by 89% with respect to ARRA in 2050, however with no GHG policy coal power generation capacity build-outs will outpace renewables by as high as 809%. Finally, coal power generation is still projected to be the largest single energy source contributor to the electricity market making up 28.0% of total available capacity, while renewables are expected to only make up 16.3% of total available capacity.

  15. Financing renewable energy for Village Power application

    Energy Technology Data Exchange (ETDEWEB)

    Santibanez-Yeneza, G.

    1997-12-01

    When one talks of rural development, no doubt, the issue of rural energy is not far behind. As a significant component of any development strategy, rural energy is seen as the engine for growth that can bring about economic upliftment in the countryside. Many approaches to rural energy development have been tried. These approaches differ from country to country. But regardless of structure and approach, the goal remain essentially the same: to provide rural communities access to reliable energy services at affordable prices. In recent years, as global concern for the environment has increased, many governments have turned to renewable energy as a more environment friendly alternative to rural electrification. Technological advances in renewable energy application has helped to encourage this use. System reliability has improved, development costs have, to some extent been brought down and varied application approaches have been tried and tested in many areas. Indeed, there is huge potential for the development of renewable energy in the rural areas of most developing countries. At the rural level, renewable energy resources are almost always abundantly available: woodwaste, agricultural residues, animal waste, small-scale hydro, wind, solar and even sometimes geothermal resources. Since smaller scale systems are usually expected in these areas, renewable energy technologies can very well serve as decentralized energy systems for rural application. And not only for rural applications, new expansion planning paradigms have likewise led to the emergence of decentralized energy systems not only as supply options but also as corrective measures for maintaining end of line voltage levels. On the other hand, where renewable energy resource can provide significant blocks of power, they can be relied upon to provide indigenous power to the grids.

  16. Wind Power - A Power Source Enabled by Power Electronics

    DEFF Research Database (Denmark)

    Blaabjerg, Frede; Chen, Zhe

    2004-01-01

    The global electrical energy consumption is still rising and there is a steady demand to increase the power capacity. The production, distribution and the use of the energy should be as technological efficient as possible and incentives to save energy at the end-user should be set up. The deregul......The global electrical energy consumption is still rising and there is a steady demand to increase the power capacity. The production, distribution and the use of the energy should be as technological efficient as possible and incentives to save energy at the end-user should be set up....... The deregulation of energy has lowered the investment in bigger power plants, which means the need for new electrical power sources may be very high in the near future. Two major technologies will play important roles to solve the future problems. One is to change the electrical power production sources from...... the conventional, fossil (and short term) based energy sources to renewable energy sources. The other is to use high efficient power electronics in power systems, power production and end-user application. This paper discuss the most emerging renewable energy source, wind energy, which by means of power...

  17. Distributed renewable power from biomass and other waste fuels

    Science.gov (United States)

    Lyons, Chris

    2012-03-01

    The world population is continually growing and putting a burden on our fossil fuels. These fossil fuels such as coal, oil and natural gas are used for a variety of critical needs such as power production and transportation. While significant environmental improvements have been made, the uses of these fuels are still causing significant ecological impacts. Coal power production efficiency has not improved over the past thirty years and with relatively cheap petroleum cost, transportation mileage has not improved significantly either. With the demand for these fossil fuels increasing, ultimately price will also have to increase. This presentation will evaluate alternative power production methods using localized distributed generation from biomass, municipal solid waste and other waste sources of organic materials. The presentation will review various gasification processes that produce a synthetic gas that can be utilized as a fuel source in combustion turbines for clean and efficient combined heat and power. This fuel source can produce base load renewable power. In addition tail gases from the production of bio-diesel and methanol fuels can be used to produce renewable power. Being localized can reduce the need for long and costly transmission lines making the production of fuels and power from waste a viable alternative energy source for the future.

  18. Impedance source power electronic converters

    CERN Document Server

    Liu, Yushan; Ge, Baoming; Blaabjerg, Frede; Ellabban, Omar; Loh, Poh Chiang

    2016-01-01

    Impedance Source Power Electronic Converters brings together state of the art knowledge and cutting edge techniques in various stages of research related to the ever more popular impedance source converters/inverters. Significant research efforts are underway to develop commercially viable and technically feasible, efficient and reliable power converters for renewable energy, electric transportation and for various industrial applications. This book provides a detailed understanding of the concepts, designs, controls, and application demonstrations of the impedance source converters/inverters. Key features: Comprehensive analysis of the impedance source converter/inverter topologies, including typical topologies and derived topologies. Fully explains the design and control techniques of impedance source converters/inverters, including hardware design and control parameter design for corresponding control methods. Presents the latest power conversion solutions that aim to advance the role of pow...

  19. Study of the main mechanisms for incentive alternative sources of renewable energy for power generation in Chile, Argentina and Brazil; Estudo dos principais mecanismos de incentivo as fontes alternativas de energia para geracao renovavel de eletricidade no Chile, Argentina e Brasil

    Energy Technology Data Exchange (ETDEWEB)

    Nogueira, Larissa Goncalves [Universidade Estadual de Campinas (FEM/UNICAMP), SP (Brazil). Fac. de Engenharia Mecanica. Dept. de Energia; Dedecca, Joao Gorestein; Jannuzzi, Gilberto de Martinno; Gomes, Rodolfo Dourado [Universidade Estadual de Campinas (UNICAMP), SP (Brazil)

    2010-07-01

    From the experience of developed countries, Brazil, Chile and Argentina are implementing some important mechanisms for encouraging alternative sources of renewable energy for power generation and thus manage to incorporate these power sources in their power matrix. However, the obstacles faced are not insignificant. This study will present and analyze the Chilean, Argentinean and Brazilian experience when it comes to implementing programs and policies based on feed-in tariffs, renewable portfolio standard and bidding mechanisms. (author)

  20. Renewable power needs smart storage solutions

    Energy Technology Data Exchange (ETDEWEB)

    Madison, Alison L.

    2010-10-24

    Ancient Greek philosopher Heraclitus claimed that the only thing constant in life is change, a truth we must accept and even celebrate. Another truth we face today is a growing demand for more energy to help us power the kind and pace of change we’ve become accustomed to, while minimizing environmental consequences. Renewable energy--two words that often find themselves woven into environmentally conscious dialogue. And according to Dave Lucero, director of alternative energy storage at EaglePicher Technologies LLC, the Tri-Cities should be thinking about two more: energy storage. Lucero recently addressed the Tri-Cities Research District about tackling the persistent challenge of maximizing renewable energy, which is inherently variable due to changing weather patterns. Capturing that energy and making it available for later use is vital.

  1. Southern African Power Pool: Planning and Prospects for Renewable Energy

    Energy Technology Data Exchange (ETDEWEB)

    Miketa, Asami [IRENA, Bonn (Germany); Merven, Bruno [Energy Research Centre, Univ. of Cape Town (South Africa)

    2013-06-25

    With the energy systems of many African countries dominated by fossil-fuel sources that are vulnerable to global price volatility, regional and intra-continental power systems with high shares of renewable energy can provide least-cost option to support continued economic growth and address the continent’s acute energy access problem. Unlocking Africa’s huge renewable energy potential could help to take many people out of poverty, while ensuring the uptake of sustainable technologies for the continent’s long-term development. The report examines the ''renewable scenario'' based on a modelling tool developed by IRENA and tested in cooperation with the South African National Energy Development Institute (SANEDI) and the Southern African Development Community (SADC). Initial results from the System Planning and Test (SPLAT) model show that the share of renewable technologies in Southern Africa could increase from the current 10% to as much as 46% in 2030, with 20% of decentralised capacity coming from renewable sources and nearly 80% of the envisaged capacity additions between 2010 and 2030 being provided by renewable energy technologies. Deployment and export of hydropower from the Democratic Republic of Congo’s Inga hydropower project to the SADC region would significantly reduce average electricity generation costs. Analysis using SPLAT – along with a similar model developed for West Africa – can provide valuable input for regional dialogue and energy projects such as the East and Southern Africa Clean Energy Corridor and the Programme for Infrastructure and Development in Africa (PIDA). IRENA, together with partner organisations, has started plans to set up capacity building and development support for energy system modelling and planning for greater integration of renewables in Africa. IRENA is also completing a similar model and study for East Africa and intends to extend this work to Central and North Africa.

  2. A contribution on utilization of renewable energy sources in micro-power plants operating for autonomous power supply; Ein Beitrag zur Nutzung regenerativer Energie in Kleinstkraftwerken im Inselbetrieb

    Energy Technology Data Exchange (ETDEWEB)

    Schulz, M.

    2005-09-21

    The present dissertation deals with several aspects related to the electrification of remote areas. Being restricted to plants with electromechanical energy conversion, solar cells are not part of the research done. The work describes the prime movers to be utilized: the water wheel and the windmill. An analytic approach to describe the windmill is presented and necessary to understand the basic physical equations. As there is no mathematical way to describe the water wheel, measurements taken from a model build by the Research Center for Water and Environmental Engineering fwu provide the necessary characteristics of the water wheel. The watercourse in the fwu laboratories was used to measure the torque to speed characteristic of a triangular-segment cell-wheel under well defined conditions. These measurements are especially worth to be mentioned as almost no information regarding the water wheel characteristics is available in the literature. The description of the basics of the two prime movers is followed by the presentation of three different generator types. Special attention is paid to the self excitation process of the asynchronous machine, which is analytically examined in detail to create appropriate simulation models. The approach to describe the behavior of the machine in the rotor reference frame allows the consideration of the residual magnetism as a cause for the self excitation. The nonlinearities of the iron are also included in the model which leads to good consistency between measured and simulated results. A further contribution of innovative technology is the introduction of the rotating armature machine with switchable stator windings. This particular generator allows a wide variation of speed and is therefore especially suitable for its utilization together with the windmill. From the large number of possible of power electronic topologies, three are of special interest and became part of the investigations. First, the ferroresonant

  3. Compressed air energy storage power plants as an option for the grid integration of renewable energy sources. A comparison of the concepts; Druckluftspeicherkraftwerke als Option zur Netzintegration erneuerbarer Energiequellen. Ein Vergleich der Konzepte

    Energy Technology Data Exchange (ETDEWEB)

    Tuschy, Ilja [Fachhochschule Flensburg (Germany). Inst. fuer Energiesystemtechnik

    2008-07-01

    The integration of an increasing amount of power generation from renewable energy sources is a large challenge for the electricity supply. Apart from the compensation of varying production by supra-regional grids and apart from the further development of peak load power stations the energy storage is discussed as an option. Several power suppliers referred to compressed air energy storage plants as a possible solution. The authors of the contribution under consideration compare the different concepts for compressed air energy power stations systematically. A special emphasis is the thermodynamic evaluation of the different concepts. Also energy-technical aspects are addressed which decide on possibilities of application and perspectives of development for compressed air energy power stations.

  4. Soldier System Power Sources

    Science.gov (United States)

    2006-12-31

    squad level, with the fundamental goal of reducing the total mass of the electric power sources carried by a Marine in the Expeditionary Forces while...still meeting all of his electric power demands. To achieve that goal, this work investigated the effectiveness of hybrid power sources composed...variously of batteries, fuel cells, and super capacitors, it developed control algorithms for those hybrid power sources , it assessed the value of

  5. International Requirements for Large Integration of Renewable Energy Sources

    DEFF Research Database (Denmark)

    Molina-Garcia, Angel; Hansen, Anca Daniela; Muljadi, Ed

    2017-01-01

    Most European countries have concerns about the integration of large amounts of renewable energy sources (RES) into electric power systems, and this is currently a topic of growing interest. In January 2008, the European Commission published the 2020 package, which proposes committing the European...... Union to a 20% reduction in greenhouse gas emissions, to achieve a target of deriving 20% of the European Union's final energy consumption from renewable sources, and to achieve 20% improvement in energy efficiency both by the year 2020 [1]. Member states have different individual goals to meet...... these overall objectives, and they each need to provide a detailed roadmap describing how they will meet these legally binding targets [2]. At this time, RES are an indispensable part of the global energy mix, which has been partially motivated by the continuous increases in hydropower as well as the rapid...

  6. Integration of Renewable Generation in Power System Defence Plans

    DEFF Research Database (Denmark)

    Das, Kaushik

    , one of them being the North East area with high share of wind power generation.The aim of this study is to investigate how renewable generations like wind power can contribute to the power system defence plans. This PhD project “Integration of Renewable Generation in Power System Defence Plans...

  7. West African Power Pool: Planning and Prospects for Renewable Energy

    Energy Technology Data Exchange (ETDEWEB)

    Miketa, Asami [IRENA, Bonn (Germany); Merven, Bruno [Energy Research Centre, Univ. of Cape Town (South Africa)

    2013-06-25

    With the energy systems of many African countries dominated by fossil-fuel sources that are vulnerable to global price volatility, regional and intra-continental power systems with high shares of renewable energy can provide least-cost option to support continued economic growth and address the continent’s acute energy access problem. Unlocking Africa’s huge renewable energy potential could help to take many people out of poverty, while ensuring the uptake of sustainable technologies for the continent’s long-term development. The report examines a ''renewable scenario'' based on a modelling tool developed by IRENA and tested with assistance from the Economic Community of West African States (ECOWAS). Initial results from the ECOWAS Renewable Energy Planning (EREP) model for continental ECOWAS countries show that the share of renewable technologies in the region could increase from the current 22% of electricity generation to as much as 52% in 2030, provided that the cost of these technologies continues to fall and fossil fuel prices continue to rise. In this scenario, nearly half of the envisaged capacity additions between 2010 and 2030 would be with renewable technologies. Analysis using EREP – along with a similar model developed for Southern Africa – can provide valuable input for regional dialogue and energy projects such as the East and Southern Africa Clean Energy Corridor and the Programme for Infrastructure and Development in Africa (PIDA). IRENA, together with partner organisations, has started plans to set up capacity building and development support for energy system modelling and planning for greater integration of renewables in Africa. IRENA is also completing a similar model and study for East Africa and intends to extend this work to Central and North Africa.

  8. Renewable source controls for grid stability.

    Energy Technology Data Exchange (ETDEWEB)

    Byrne, Raymond Harry; Elliott, Ryan Thomas; Neely, Jason C.; Silva Monroy, Cesar Augusto; Schoenwald, David Alan; Grant, Lisa

    2012-12-01

    The goal of this study was to evaluate the small signal and transient stability of the Western Electric- ity Coordinating Council (WECC) under high penetrations of renewable energy, and to identify control technologies that would improve the system performance. The WECC is the regional entity responsible for coordinating and promoting bulk electric system reliability in the Western Interconnection. Transient stability is the ability of the power system to maintain synchronism after a large disturbance while small signal stability is the ability of the power system to maintain synchronism after a small disturbance. Tran- sient stability analysis usually focuses on the relative rotor angle between synchronous machines compared to some stability margin. For this study we employed generator speed relative to system speed as a metric for assessing transient stability. In addition, we evaluated the system transient response using the system frequency nadir, which provides an assessment of the adequacy of the primary frequency control reserves. Small signal stability analysis typically identi es the eigenvalues or modes of the system in response to a disturbance. For this study we developed mode shape maps for the di erent scenarios. Prony analysis was applied to generator speed after a 1.4 GW, 0.5 second, brake insertion at various locations. Six di erent WECC base cases were analyzed, including the 2022 light spring case which meets the renewable portfolio standards. Because of the di culty in identifying the cause and e ect relationship in large power system models with di erent scenarios, several simulations were run on a 7-bus, 5-generator system to isolate the e ects of di erent con gurations. Based on the results of the study, for a large power system like the WECC, incorporating frequency droop into wind/solar systems provides a larger bene t to system transient response than replacing the lost inertia with synthetic inertia. From a small signal stability

  9. Transmission needs across a fully renewable European power system

    CERN Document Server

    Rodriguez, Rolando A; Andresen, Gorm B; Heide, Dominik; Greiner, Martin

    2013-01-01

    The residual load and excess power generation of 27 European countries with a 100% penetration of variable renewable energy sources are explored in order to quantify the benefit of power transmission between countries. Estimates are based on extensive weather data, which allows for modelling of hourly mismatches between the demand and renewable generation from wind and solar photovoltaics. For separated countries, balancing is required to cover around 24% of the total annual energy consumption. This number can be reduced down to 15% once all countries are networked together with uncon- strained interconnectors. The reduction represents the maximum possible benefit of transmission for the countries. The total Net Transfer Capacity of the unconstrained interconnectors is roughly twelve times larger than current values. However, constrained interconnector capacities six times larger than the current values are found to provide 97% of the maximum possible benefit of cooperation. This motivates a detailed investig...

  10. Opportunities for the integration of wind gas at new buildings into the Act on Power Generation from Renewable Energy Sources (EEWaermeG); Moeglichkeiten zur Integration des Einsatzes von Windgas bei Neubauten in das Erneuerbare-Energie-Waermegesetz

    Energy Technology Data Exchange (ETDEWEB)

    Antoni, Oliver [Stiftung Umweltenergierecht, Wuerzburg (Germany)

    2013-02-15

    The power-to-gas technology as well as the utilization of wind gas produced by this technology is in the transitional phase from the research and development to the market maturity. Despite of sophisticated technical developments and despite of the first regulatory approaches of the financial and other promotions, further efforts are necessary in order to make the utilization of wind gas more economical and in order to facilitate the utilization of wind gas as an option for energy storage to handle the fluctuating power generation from wind power and solar energy. The author of the contribution under consideration reports on the so far only little noticed legal aspect of utilizing wind gas for heat supply and refrigeration supply of buildings as well as on the fulfilment of the obligation to use from the Act on Power Generation from Renewable Energy Sources (EEWaermeG).

  11. Militarized Thermoelectric Power Sources.

    Science.gov (United States)

    1979-07-01

    Thermoelectric power sources are being developed to provide multifuel, silent, maintenance free tactical power generators for forward area...applications. Recent technology improvements, state of development, and performance characteristics of the 100-Watt and 500-Watt Thermoelectric Power Sources are presented. (Author)

  12. International Standards to Develop and Promote Energy Efficiency and Renewable Energy Sources

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2007-07-01

    International Standards are a powerful tool for disseminating new technologies and good practices, developing global markets and supporting the harmonization of government policies on energy efficiency and renewable sources on a global scale.

  13. How to develop renewable power in China? A cost-effective perspective.

    Science.gov (United States)

    Cong, Rong-Gang; Shen, Shaochuan

    2014-01-01

    To address the problems of climate change and energy security, Chinese government strived to develop renewable power as an important alternative of conventional electricity. In this paper, the learning curve model is employed to describe the decreasing unit investment cost due to accumulated installed capacity; the technology diffusion model is used to analyze the potential of renewable power. Combined with the investment cost, the technology potential, and scenario analysis of China social development in the future, we develop the Renewable Power Optimization Model (RPOM) to analyze the optimal development paths of three sources of renewable power from 2009 to 2020 in a cost-effective way. Results show that (1) the optimal accumulated installed capacities of wind power, solar power, and biomass power will reach 169000, 20000, and 30000 MW in 2020; (2) the developments of renewable power show the intermittent feature; (3) the unit investment costs of wind power, solar power, and biomass power will be 4500, 11500, and 5700 Yuan/KW in 2020; (4) the discounting effect dominates the learning curve effect for solar and biomass powers; (5) the rise of on-grid ratio of renewable power will first promote the development of wind power and then solar power and biomass power.

  14. How to Develop Renewable Power in China? A Cost-Effective Perspective

    Directory of Open Access Journals (Sweden)

    Rong-Gang Cong

    2014-01-01

    Full Text Available To address the problems of climate change and energy security, Chinese government strived to develop renewable power as an important alternative of conventional electricity. In this paper, the learning curve model is employed to describe the decreasing unit investment cost due to accumulated installed capacity; the technology diffusion model is used to analyze the potential of renewable power. Combined with the investment cost, the technology potential, and scenario analysis of China social development in the future, we develop the Renewable Power Optimization Model (RPOM to analyze the optimal development paths of three sources of renewable power from 2009 to 2020 in a cost-effective way. Results show that (1 the optimal accumulated installed capacities of wind power, solar power, and biomass power will reach 169000, 20000, and 30000 MW in 2020; (2 the developments of renewable power show the intermittent feature; (3 the unit investment costs of wind power, solar power, and biomass power will be 4500, 11500, and 5700 Yuan/KW in 2020; (4 the discounting effect dominates the learning curve effect for solar and biomass powers; (5 the rise of on-grid ratio of renewable power will first promote the development of wind power and then solar power and biomass power.

  15. Solar Power Sources: PV, Concentrated PV, and Concentrated Solar Power

    DEFF Research Database (Denmark)

    Kim, Katherine A.; Mentesidi, Konstantina; Yang, Yongheng

    2017-01-01

    Solar power is highly abundant, relatively reliable, and not limited to a geographic region, making it one of the most important renewable energy sources. Catering for a clean and green energy system, solar energy will be an active player in the future mixed power grid that is also undergoing a s...

  16. FINANCING RENEWABLE ENERGY SOURCES INVESTMENT IN POLAND

    Directory of Open Access Journals (Sweden)

    Jerzy Piotr Gwizdała

    2017-09-01

    Full Text Available In Poland, as in other European Union countries, the project finance structure is used to finance investments in the field of energy. This method investment financing is often used in the world. The upward trend inhibition in recent periods has been due to the global financial crisis and financial instability in the euro zone. On account of the necessity to develop the energy infrastructure associated with renewable sources, the considerable strengthening in the use of project finance techniques can be expected. The particular progression may be observed in the case of public-private partnership (ppp, where public investments are carried out by private companies. Companies, in case of investment realization in the field of ppp, almost always use project finance, because it is a beneficial way to separate the risks associated with an investment from the balance sheet of the compa-ny.

  17. The Treatment of Renewable Energy Certificates, EmissionsAllowances, and Green Power Programs in State Renewables PortfolioStandards

    Energy Technology Data Exchange (ETDEWEB)

    Holt, Edward A.; Wiser, Ryan H.

    2007-04-17

    Twenty-one states and the District of Columbia have adopted mandatory renewables portfolio standards (RPS) over the last ten years. Renewable energy attributes-such as the energy source, conversion technology, plant location and vintage, and emissions-are usually required to verify compliance with these policies, sometimes through attributes bundled with electricity, and sometimes with the attributes unbundled from electricity and traded separately as renewable energy certificates (RECs). This report summarizes the treatment of renewable energy attributes in state RPS rules. Its purpose is to provide a source of information for states considering RPS policies, and also to draw attention to certain policy issues that arise when renewable attributes and RECs are used for RPS compliance. Three specific issues are addressed: (1) the degree to which unbundled RECs are allowed under existing state RPS programs and the status of systems to track RECs and renewable energy attributes; (2) definitions of the renewable energy attributes that must be included in order to meet state RPS obligations, including the treatment of available emissions allowances; and (3) state policies on whether renewable energy or RECs sold through voluntary green power transactions may count towards RPS obligations.

  18. Power Electronics, Energy Harvesting and Renewable Energies Laboratory

    Data.gov (United States)

    Federal Laboratory Consortium — The research in the Power Electronics, Energy Harvesting and Renewable Energies Laboratory (PEHREL) is mainly focused on investigation, modeling, simulation, design,...

  19. Efficient electrochemical CO2 conversion powered by renewable energy.

    Science.gov (United States)

    Kauffman, Douglas R; Thakkar, Jay; Siva, Rajan; Matranga, Christopher; Ohodnicki, Paul R; Zeng, Chenjie; Jin, Rongchao

    2015-07-22

    The catalytic conversion of CO2 into industrially relevant chemicals is one strategy for mitigating greenhouse gas emissions. Along these lines, electrochemical CO2 conversion technologies are attractive because they can operate with high reaction rates at ambient conditions. However, electrochemical systems require electricity, and CO2 conversion processes must integrate with carbon-free, renewable-energy sources to be viable on larger scales. We utilize Au25 nanoclusters as renewably powered CO2 conversion electrocatalysts with CO2 → CO reaction rates between 400 and 800 L of CO2 per gram of catalytic metal per hour and product selectivities between 80 and 95%. These performance metrics correspond to conversion rates approaching 0.8-1.6 kg of CO2 per gram of catalytic metal per hour. We also present data showing CO2 conversion rates and product selectivity strongly depend on catalyst loading. Optimized systems demonstrate stable operation and reaction turnover numbers (TONs) approaching 6 × 10(6) molCO2 molcatalyst(-1) during a multiday (36 h total hours) CO2 electrolysis experiment containing multiple start/stop cycles. TONs between 1 × 10(6) and 4 × 10(6) molCO2 molcatalyst(-1) were obtained when our system was powered by consumer-grade renewable-energy sources. Daytime photovoltaic-powered CO2 conversion was demonstrated for 12 h and we mimicked low-light or nighttime operation for 24 h with a solar-rechargeable battery. This proof-of-principle study provides some of the initial performance data necessary for assessing the scalability and technical viability of electrochemical CO2 conversion technologies. Specifically, we show the following: (1) all electrochemical CO2 conversion systems will produce a net increase in CO2 emissions if they do not integrate with renewable-energy sources, (2) catalyst loading vs activity trends can be used to tune process rates and product distributions, and (3) state-of-the-art renewable-energy technologies are sufficient

  20. Replacing coal power in Canada with renewable energy

    Energy Technology Data Exchange (ETDEWEB)

    Hadlock, C.; Kansal, V.; Kegel, M. [Waterloo Univ., ON (Canada). Dept. of Mechanical Engineering

    2005-07-01

    At present, coal represents 19 per cent of Canada's energy production and is responsible for 80 per cent of the energy industry's greenhouse gases (GHG). It has been estimated that GHG emission levels can be reduced by 14 per cent if coal power is replaced with a cleaner energy source. This paper suggested that, due to dwindling natural gas reserves, renewable energy sources should be considered as an economically viable substitute for coal. A breakdown of energy production in Canada in 2002 was presented, along with details of Canadian emissions. The total capacity and annual generation of emissions from coal were presented, as well as additional sources of pollution, such as transboundary pollution. Various government incentives for renewable energy source development were discussed. Wind energy costs were examined along with geothermal energy, tidal energy, biomass energy, and solar energy. Rebate programs were reviewed. The gradual elimination of coal as an energy source was examined by region. Details of alternative energy methods were presented, along with their associated costs. Costs were compared to coal production and did not include any government subsidies. It was concluded that the majority of renewable resources in Canada are competitive with coal prices and in some cases cheaper. However, the resources cannot meet the electricity demands of all regions. It was suggested that wind energy is often an excellent alternative to meeting demand, but that wind power is the only natural resource that actually costs more than coal. An incentive program similar to that of Denmark was proposed, whereby the subsidy decreases every 2 years to keep in line with projected technological improvements and rising energy rates. 37 refs., 9 tabs., 3 figs.

  1. Renewable Energy Powered Membrane Technology. 1. Development and Characterization of a Photovoltaic Hybrid Membrane System

    OpenAIRE

    Schaefer, Andrea; Broeckmann, A.; Richards, B.S.

    2007-01-01

    In isolated communities where potable water sources as well as energy grids are limited or nonexistent, treating brackish groundwater aquifers with small-scale desalination systems can be a viable alternative to existing water infrastructures. Given the unavailability of power in many such situations, renewable energy is an obvious solution to power such systems. However, renewable energy is an intermittent power supply and with regards to the performance of intermittently operated desalinati...

  2. Development of renewable energy sources in Germany in 2011; Entwicklung der erneuerbaren Energien in Deutschland 2011

    Energy Technology Data Exchange (ETDEWEB)

    Musiol, Frank; Nieder, Thomas; Ruether, Thorsten; Walker, Marion [Zentrum fuer Sonnenenergie- und Wasserstoff-Forschung Baden-Wuerttemberg (ZSW), Stuttgart (Germany)

    2012-10-15

    With its energy concept of September 2010 and the energy transformation decision of June 2011, The German government has set ambitious goals for renewable energy sources: By 2020, at least 35 % of the electricity demand is to be covered by renewables; for 2030, the goal is 50 %. In consequence, the wind power industry, solar industry and others have valiantly proved their efficiency in 2011. Power generation from renewables increased dramatically in 2011 as a result of enhanced expansion of power generation capacities and favourable climate conditions. With a total of 20.3 %, wind power, solar power and other renewables for the first time ever had a bigger share in power supply than coal and nuclear power.

  3. Renewable energy sources in the Polish power sector. Analysis on generation and design onf instruments to finance power generation from renewable energy sources; Erneuerbare Energien im polnischen Stromsektor. Analyse der Entstehung und Ausgestaltung der Instrumente zur Foerderung der Stromerzeugung aus erneuerbaren Energien

    Energy Technology Data Exchange (ETDEWEB)

    Podrygala, I.

    2008-07-01

    This book written by the author, based on a combination of her in-deep research done in Poland with the fresh and independent view from abroad, can help everybody who would like to better understand Polish renewable energy policy. It includes an objective overview of the green electricity sector. Thanks to a number of meetings, interviews, and access to considerable literature, Ms. Podrygala was able also to validate the data and balance various opinions. I would like to recommend Ms. Podrygala's book for policy-makers, scientists, students, investors, and individuals as a source of actual, validated and concise information on renewable energy in Poland and its potential and prospect in the medium term. (orig.)

  4. Development Track of Renewable Power Technology in China

    Institute of Scientific and Technical Information of China (English)

    Hou Jianchao; Tan Zhongfu; Zhao Jianbao; Li Wei

    2009-01-01

    @@ Introduction Within the context of deeper global energy shortage and increasingly more polluted environment, countries throughout the world have been actively developing renewable energy sources to replace the fossil fuel, enhance the energy supply efficiency and relieve the environmental pollution. The renewable energy sources consist of hydropower and new energy sources, which are not defined exactly the same in different countries.

  5. Sustainability of hydropower as source of renewable and clean energy

    Science.gov (United States)

    Luis, J.; Sidek, L. M.; Desa, M. N. M.; Julien, P. Y.

    2013-06-01

    Hydroelectric energy has been in recent times placed as an important future source of renewable and clean energy. The advantage of hydropower as a renewable energy is that it produces negligible amounts of greenhouse gases, it stores large amounts of electricity at low cost and it can be adjusted to meet consumer demand. This noble vision however is becoming more challenging due to rapid urbanization development and increasing human activities surrounding the catchment area. Numerous studies have shown that there are several contributing factors that lead towards the loss of live storage in reservoir, namely geology, ground slopes, climate, drainage density and human activities. Sediment deposition in the reservoir particularly for hydroelectric purposes has several major concerns due to the reduced water storage volume which includes increase in the risk of flooding downstream which directly effects the safety of human population and properties, contributes to economic losses not only in revenue for power generation but also large capital and maintenance cost for reservoir restorations works. In the event of functional loss of capabilities of a hydropower reservoir as a result of sedimentation or siltation could lead to both economical and environmental impact. The objective of this paper is aimed present the importance of hydropower as a source of renewable and clean energy in the national energy mix and the increasing challenges of sustainability.

  6. Accounting Methodology for Source Energy of Non-Combustible Renewable Electricity Generation

    Energy Technology Data Exchange (ETDEWEB)

    Donohoo-Vallett, Paul [US Department of Energy, Washington, DC (United States)

    2016-10-01

    As non-combustible sources of renewable power (wind, solar, hydro, and geothermal) do not consume fuel, the “source” (or “primary”) energy from these sources cannot be accounted for in the same manner as it is for fossil fuel sources. The methodology chosen for these technologies is important as it affects the perception of the relative size of renewable source energy to fossil energy, affects estimates of source-based building energy use, and overall source energy based metrics such as energy productivity. This memo reviews the methodological choices, outlines implications of each choice, summarizes responses to a request for information on this topic, and presents guiding principles for the U.S. Department of Energy, (DOE) Office of Energy Efficiency and Renewable Energy (EERE) to use to determine where modifying the current renewable source energy accounting method used in EERE products and analyses would be appropriate to address the issues raised above.

  7. AC Motor Drive Fed by Renewable Energy Sources with PWM

    Directory of Open Access Journals (Sweden)

    J. Pavalam

    2014-01-01

    Full Text Available In this fast aproaching nature of technology the ned of Electricity becomes a mandatory in developing technology. The ned of Electricity increases the power demand where the power demand met by the conventional sources of energy has some disadvantage of polution, this disadvantage can be decreased by the use of the Renewable energy sources like Fuel Cel and available solar energy. When a FUEL cel produces AC power, basicaly two stages are required for conversion first a bosting stage and second is inversion stage. In this paper the Bost inverter topology is achieved where in the conventional methods the normal DC - AC power conversion method is used where as in this paper the PWM based DC - AC inverter has ben used which is useful in reducing the harmonics in the output of the Inverter. The voltage controled output is produced in the bost inverter the curent controled output is taken from dc-dc bidirectional converter. The Fuel cel canot be relied as a whole so a Solar PV module is conected acros the Load so while the Sunlight days the PV arays generate power and in the night time the Fuel cel is used to generate power for the load. Since, the Fuel cel and PV arays can generate power in Partial load they are prefered than any other sources. When the output from the Solar PV aray is low or when the sunlight available is not eficient in generating the power a automatic switch over is provided in the junction betwen the Solar PV aray and Fuel cel so that whenever it hapens the switch automaticaly switch over to another source. The simulation results are presented to confirm the operational feature of the proposed system.

  8. Effective Land Use for Renewable Energy Sources

    NARCIS (Netherlands)

    Dijkman, Teunis

    2009-01-01

    The aim of this research is to determine the energy densities for different methods to produce renew-able energy. Energy density is defined here as the energy that is annually produced on a certain area. Using low, average, and high energy density scenari

  9. Representation of variable renewable energy sources in TIMER, an aggregated energy system simulation model

    NARCIS (Netherlands)

    de Boer, Harmen Sytze (H S.).; van Vuuren, Detlef (D P.).|info:eu-repo/dai/nl/11522016X

    2017-01-01

    The power system is expected to play an important role in climate change mitigation. Variable renewable energy (VRE) sources, such as wind and solar power, are currently showing rapid growth rates in power systems worldwide, and could also be important in future mitigation strategies. It is

  10. Integration of Renewable Generation in Power System Defence Plans

    OpenAIRE

    Das, Kaushik; Sørensen, Poul Ejnar; Anca Daniela HANSEN; Abildgaard, Hans

    2016-01-01

    Increasing levels of penetration of wind power and other renewable generations in European power systems pose challenges to power system security. The power system operators are continuously challenged especially when generations from renewables are high thereby reducing online capacity of conventional controllable generations to minimum. In such operation hours, the system is typically more vulnerable to disturbances in general and major disturbances in particular. This was the case in the m...

  11. Microalgae: An Alternative Source of Renewable Energy

    Directory of Open Access Journals (Sweden)

    A. Z. A. Saifullah

    2016-08-01

    Full Text Available This paper presents an overview on the potentiality of microalgae with particular emphasis as a sustainable renewable energy source for biodiesel. One of the most important dilemmas of the modern world is to supply maximal amount of energy with minimal environmental impact. The total energy demand of our planet is increasing with population growth whereas the fossil fuel reserves are dwindling swiftly. Biodiesel produced from biomass is widely considered to be one of the most sustainable alternatives to fossil fuels and a viable means for energy security and environmental and economic sustainability. But as a large area of arable land is required to cultivate biodiesel producing terrestrial plants, it may lead towards food scarcity and deforestation. Microalgae have a number of characteristics that allow the production concepts of biodiesel which are significantly more sustainable than their alternatives. Microalgae possess high biomass productivity, oils with high lipid content, fast growth rates, possibility of utilizing marginal and infertile land, capable of growing in salt water and waste streams, and capable of utilizing solar light and CO2 gas as nutrients.

  12. Potential for deserts to supply reliable renewable electric power

    Science.gov (United States)

    Labordena, Mercè; Lilliestam, Johan

    2015-04-01

    To avoid dangerous climate change, the electricity systems must be decarbonized by mid-century. The world has sufficient renewable electricity resources for complete power sector decarbonization, but an expansion of renewables poses several challenges for the electricity systems. First, wind and solar PV power are intermittent and supply-controlled, making it difficult to securely integrate this fluctuating generation into the power systems. Consequently, power sources that are both renewable and dispatchable, such as biomass, hydro and concentrating solar power (CSP), are particularly important. Second, renewable power has a low power density and needs vast areas of land, which is problematic both due to cost reasons and due to land-use conflicts, in particular with agriculture. Renewable and dispatchable technologies that can be built in sparsely inhabited regions or on land with low competition with agriculture would therefore be especially valuable; this land-use competition greatly limits the potential for hydro and biomass electricity. Deserts, however, are precisely such low-competition land, and are at the same time the most suited places for CSP generation, but this option would necessitate long transmission lines from remote places in the deserts to the demand centers such as big cities. We therefore study the potential for fleets of CSP plants in the large deserts of the world to produce reliable and reasonable-cost renewable electricity for regions with high and/or rapidly increasing electricity demand and with a desert within or close to its borders. The regions in focus here are the European Union, North Africa and the Middle East, China and Australia. We conduct the analysis in three steps. First, we identify the best solar generation areas in the selected deserts using geographic information systems (GIS), and applying restrictions to minimize impact on biodiversity, soils, human heath, and land-use and land-cover change. Second, we identify

  13. Diesel engine cogeneration plants in the context of integration of renewable energy sources in power supply; Dieselmotor-Kraft-Waerme-Kopplungsanlagen im Kontext der Integration Erneuerbarer Energien in die Energieversorgung

    Energy Technology Data Exchange (ETDEWEB)

    Sievers, John

    2010-10-29

    be used optimally for mobility. The main assessment criteria for this are global warming potential, cumulated energy demand and exergy generation. Furthermore it also investigates potential sources from where the necessary bio energy for Diesel motors could be obtained. It is evident that the agricultural area available in Germany will only enable the production of a small part of the bio energy needed for the German power supply. An interesting option would be to make use of biogas on a larger scale and to import vegetable oils from outside Europe. This should mainly be carried out using degraded land, which would require an agricultural area in the range of 6 to 12 Mio. ha. Final results show that using renewable fuels, and after the integration of wind power, a full balance of the residual load by cogeneration, is reasonable and feasible. Such a wind-cogeneration DSM system should be supplemented by a stronger UCTE electricity grid and by the integration of hydro power plants for balancing power, which will enable the large-scale exchange of renewable energies within Europe and the neighboring regions.

  14. Design and Implementation of Fuzzy Logic Controlled Uninterruptible Power Supply Integrating Renewable Solar Energy

    OpenAIRE

    Angelo A. Beltran Jr.; Felicito S. Caluyo

    2014-01-01

    —The control and operation of electronic systems relies and depends on the availability of the power supply. Rechargeable batteries have been more pervasively used as the energy storage and power source for various electrical and electronic systems and devices, such as communication systems, electronic devices, renewable power systems, electric vehicles, etc. However, the rechargeable batteries are subjected to the availability of the external power source when ...

  15. An overview of renewable energy in Spain. The small hydro-power case

    Energy Technology Data Exchange (ETDEWEB)

    Montes, G.M. [Universidad de Granada (Spain). Departamento de Ingenieria Civil; Lopez, M. del Mar Serrano [Institute for the Diversification and Saving of the Energy, Madrid (Spain). Hydroelectric Department; Gamez, M. del Carmen Rubio; Ondina, A.M. [Universidad de Granada (Spain). Departamento de Ingenieria Civil, Ingenieria de la Construccion

    2005-10-01

    Development of hydroelectric energy, a renewable source of power, is guaranteed and maintained by the Plan of Promotion of the Renewable Energies 1999-2010 (PLAFER). This is arrived at by means of a definition and establishment of a series of power objectives in which an increase in the hydroelectric sector in anticipated. This study corresponds to a revision of the present situation of the mini-hydraulic energy, it is expected of evolution, and development in Spain. (author)

  16. Energy Storage Applications in Power Systems with Renewable Energy Generation

    Science.gov (United States)

    Ghofrani, Mahmoud

    In this dissertation, we propose new operational and planning methodologies for power systems with renewable energy sources. A probabilistic optimal power flow (POPF) is developed to model wind power variations and evaluate the power system operation with intermittent renewable energy generation. The methodology is used to calculate the operating and ramping reserves that are required to compensate for power system uncertainties. Distributed wind generation is introduced as an operational scheme to take advantage of the spatial diversity of renewable energy resources and reduce wind power fluctuations using low or uncorrelated wind farms. The POPF is demonstrated using the IEEE 24-bus system where the proposed operational scheme reduces the operating and ramping reserve requirements and operation and congestion cost of the system as compared to operational practices available in the literature. A stochastic operational-planning framework is also proposed to adequately size, optimally place and schedule storage units within power systems with high wind penetrations. The method is used for different applications of energy storage systems for renewable energy integration. These applications include market-based opportunities such as renewable energy time-shift, renewable capacity firming, and transmission and distribution upgrade deferral in the form of revenue or reduced cost and storage-related societal benefits such as integration of more renewables, reduced emissions and improved utilization of grid assets. A power-pool model which incorporates the one-sided auction market into POPF is developed. The model considers storage units as market participants submitting hourly price bids in the form of marginal costs. This provides an accurate market-clearing process as compared to the 'price-taker' analysis available in the literature where the effects of large-scale storage units on the market-clearing prices are neglected. Different case studies are provided to

  17. Power System Study for Renewable Energy Interconnection in Malaysia

    Science.gov (United States)

    Askar, O. F.; Ramachandaramurthy, V. K.

    2013-06-01

    The renewable energy (RE) sector has grown exponentially in Malaysia with the introduction of the Feed-In-Tariff (FIT) by the Ministry of Energy, Green Technology and Water. Photovoltaic, biogas, biomass and mini hydro are among the renewable energy sources which offer a lucrative tariff to incite developers in taking the green technology route. In order to receive the FIT, a developer is required by the utility company to perform a power system analysis which will determine the technical feasibility of an RE interconnection to the utility company's existing grid system. There are a number of aspects which the analysis looks at, the most important being the load flow and fault levels in the network after the introduction of an RE source. The analysis is done by modelling the utility company's existing network and simulating the network with the interconnection of an RE source. The results are then compared to the values before an interconnection is made as well as ensuring the voltage rise or the increase in fault levels do not violate any pre-existing regulations set by the utility company. This paper will delve into the mechanics of performing a load flow analysis and examining the results obtained.

  18. Comparison study between a Renewable Energy Supply System and a supergrid for achieving 100% from renewable energy sources in Islands

    DEFF Research Database (Denmark)

    Xydis, George

    2013-01-01

    Numerous efforts have been done for achieving the maximum penetration of renewable energy sources (RESs) in the autonomous grids of Greek islands, which never exceeded 10%, despite the exceptional wind and solar potential. Large fluctuations on demand during summer, winter, and 24-h period...... in combination with the technical restrictions of diesel generators of the existing conventional power stations are a major concern of power supply system. Reversing the roles of diesel generators and wind farms (WFs), to use WF as the basic energy source and diesel generators as stand-by system changed in fact...... the stochastic behavior of wind energy to the demand, to provide the system with guaranteed power. This Wind–Hydro Plants in combination with the most adequate RES forming an Renewable Energy Supply System (RESS), increase further the economical penetration of RES into autonomous grids up to 90% or even 100...

  19. Rural population and renewable energy sources: Experiences of the Republic of Serbia

    Directory of Open Access Journals (Sweden)

    Pucar Mila

    2006-01-01

    Full Text Available During the last decade of the twentieth century the use of green (renewable energy has become the imperative not only in developed countries worldwide, but also in poorer countries like Asia and Africa. The change from traditional to renewable energy sources carries valuable improvements in environmental protection and economic efficacy. This paper through individual examples, explores the possibility of replacing traditional with renewable energy sources such as solar, wind, geothermal, energy of small hydroelectric power plants, etc. worldwide and in rural Serbian communities.

  20. Renewable Power for the Swedish Antarctic Station Wasa

    Energy Technology Data Exchange (ETDEWEB)

    Henryson, Mattias; Svensson, Martin [Royal Inst. of Technology, Stockholm (Sweden). Dept. of Energy Technology

    2004-07-01

    As the debate on fossil fuel usage in Antarctica has been more and more highlighted, the participating countries, bound by the Antarctic treaty, have encouraged changes in their power systems. Some of the stations or research stations in Antarctica are very large, constituting smaller towns with all conceivable service, and hence very energy consuming. Focus is put on partly or completely replacing fossil fuelled energy with renewable energy such as wind and solar power, supported by either batteries or fuel cells. Today there are a number of both successful and unsuccessful installations of renewable energy systems in Antarctica. Implementing a power system in remote areas where continuous access is limited comprises great technical challenges and Antarctica fulfils by all means every difficulty involved. The objective of this thesis is to propose ways of meeting power and energy demands for the Swedish Antarctic Research Program (SWEDARP) under the strict environmental legislations by as far as possible utilising the free renewable energy resources. A new power system is aimed at supplying 1 kW of electric power for continuous monitoring and collection of research data. The station is manned for three months, which implies a need of an autonomous system with high reliability. The following was based on a technical viability and economical feasibility study. Results are based upon analyses and computer simulations (HOMER) on how each fundamental system component is expected to work in the harsh climate conditions found at the station Wasa in Antarctica. It was found that wind power has the greatest potential as primary energy source in Antarctica. Supported by appropriate batteries, a reliable and in many ways feasible system can be obtained. Nevertheless, for the chosen techniques to endure the harsh climate conditions, sufficient modifications and developments of each component are needed. Based on the analyses the survey results in a proposal for a final system

  1. Fuel-efficiency of hydrogen and heat storage technologies for integration of fluctuating renewable energy sources

    DEFF Research Database (Denmark)

    Mathiesen, Brian Vad; Lund, Henrik

    2005-01-01

    This paper presents the methodology and results of analysing the use of different energy storage technologies in the task of integration of fluctuating renewable energy sources (RES) into the electricity supply. The analysis is done on the complete electricity system including renewable energy...... sources as well as power plants and CHP (Combined heat and power production). Emphasis is put on the need for ancillary services. Devices to store electricity as well as devices to store heat can be used to help the integration of fluctuating sources. Electricity storage technologies can be used...

  2. A Review of Hybrid Renewable Energy Systems for Electric Power Generation

    Directory of Open Access Journals (Sweden)

    Md. Ibrahim

    2015-08-01

    Full Text Available Integration and combined utilization of renewable energy sources are becoming increasingly attractive. This paper is a review of hybrid renewable energy systems technologies for power generation, important issues and challenges in their design stage. Generation technology selection and unit sizing, System configurations and Energy management and control are discussed. Applications of hybrid energy systems, advantages of hybrid energy systems, issues and problems related to hybrid energy systems and an overview of energy storage technologies for renewable energy systems are presented. This paper also highlights the future trends of Hybrid energy systems, which represent a promising sustainable solution for power generation.

  3. Power Electronics for Renewable Energy Systems - Status and Trends

    DEFF Research Database (Denmark)

    Blaabjerg, Frede; Ma, Ke; Yang, Yongheng

    2014-01-01

    In the past few decades, the energy paradigms in many countries are experiencing significant change from fossil-based resources to cleaner renewables. It is expected that the scenario of highly penetrated renewables is going to be further enhanced. This requires that the production, distribution...... electronics in generation, transmission/distribution and end-user application, together with advanced controls, can pave the way for renewable energy resources. In view of this, some of the most promising renewable candidates like wind power and photovoltaic, which are becoming a significant part...

  4. A proposal for the modular integration of the renewable energy sources, via hydrogen, and the Rankine power cycle; Una propuesta de integracion modular de las fuentes de energia renovables, via hidrogeno, y el ciclo de potencia Rankine

    Energy Technology Data Exchange (ETDEWEB)

    Sanchez Dirzo, Rafael

    2004-07-01

    This thesis synthesizes the state-of-the-art of the modular integration of the renewable energy sources and the Ranking power cycle. This is possible to obtain due to the development of the hydrogen production technologies and with it the chemical storage of the energies solar, Aeolian (wind) and tidal, among others. The purpose of this thesis is the assessment of hydrogen as fuel, its obtaining through the breaking of the water molecule using the renewable energies and the thermodynamic analysis of two prototypes for its energy conversion into electricity and power, voltage and fixed frequency: the first one at laboratory scale of 800 W and the second one, on industrial scale of 1 GW of power. Included here is the synthesis of the increasing bibliography on the development of the hydrogen technologies and the renewable energies, passing through the mass and energy balance in the power cycles until proposing, at the level of Process Flow Charts of the results of the proposed prototypes. The products show the possibility of constructing and operating the experimental prototype, whereas the thermodynamic analysis suggests that the industrial prototype is viable. The economic analysis of both proposals is part of a doctorate project in process. [Spanish] Esta tesis sintetiza el estado del arte de la integracion modular de las fuentes de energia renovables y el ciclo de potencia Ranking. Esto es posible lograrlo debido al desarrollo de las tecnologias de produccion de hidrogeno y con ello el almacenamiento quimico de las energias solar, eolica y maremotriz, entre otras. Es objetivo de esta tesis la valoracion del hidrogeno como combustible, su obtencion a traves del rompimiento de la molecula del agua utilizando las energias renovables y el analisis termodinamico de dos prototipo para su conversion energetica en electricidad a potencia, voltaje y frecuencia fijos: el primero a escala de laboratorio de 800 W y el segundo, a escala industrial de 1 GW de potencia. Se

  5. Power quality analysis of hybrid renewable energy system

    Directory of Open Access Journals (Sweden)

    Rinchin W. Mosobi

    2015-12-01

    Full Text Available An hybrid renewable energy sources consisting of solar photovoltaic, wind energy system, and a microhydro system is proposed in this paper. This system is suitable for supplying electricity to isolated locations or remote villages far from the grid supply. The solar photovoltaic system is modeled with two power converters, the first one being a DC-DC converter along with an maximum power point tracking to achieve a regulated DC output voltage and the second one being a DC-AC converter to obtain AC output. The wind energy system is modeled with a wind-turbine prime mover with varying wind speed and fixed pitch angle to drive an self excited induction generator (SEIG. Owing to inherent drooping characteristics of the SEIG, a closed loop turbine input system is incorporated. The microhydro system is modeled with a constant input power to drive an SEIG. The three different sources are integrated through an AC bus and the proposed hybrid system is supplied to R, R-L, and induction motor loads. A static compensator is proposed to improve the load voltage and current profiles; it also mitigates the harmonic contents of the voltage and current. The static synchronous compensator is realized by means of a three-phase IGBT-based current-controlled voltage source inverter with a self-supporting DC bus. The complete system is modeled and simulated using Matlab/Simulink. The simulation results obtained illustrate the feasibility of the proposed system and are found to be satisfactory.

  6. Sources of evaluation of nuclear and renewable energy contained in the local press

    OpenAIRE

    1987-01-01

    Examined the sources of evaluative coverage concerning nuclear power and renewable alternatives contained in local UK daily press coverage. 10 categories of source were defined for their relevance to the nuclear debate and energy issues. Out of these, only pronuclear industries and national government produced more positive than negative appraisals of nuclear power. However, detractors of nuclear power were more varied, the most prolific category being the general public. Alternative technolo...

  7. Design for Reliability of Power Electronics in Renewable Energy Systems

    DEFF Research Database (Denmark)

    Ma, Ke; Yang, Yongheng; Wang, Huai

    2014-01-01

    Power electronics is the enabling technology for maximizing the power captured from renewable electrical generation, e.g., the wind and solar technology, and also for an efficient integration into the grid. Therefore, it is important that the power electronics are reliable and do not have too many...... failures during operation which otherwise will increase cost for operation, maintenance and reputation. Typically, power electronics in renewable electrical generation has to be designed for 20–30 years of operation, and in order to do that, it is crucial to know about the mission profile of the power...... electronics technology as well as to know how the power electronics technology is loaded in terms of temperature and other stressors relevant, to reliability. Hence, this chapter will show the basics of power electronics technology for renewable energy systems, describe the mission profile of the technology...

  8. Nuclear electric power sources

    Science.gov (United States)

    Singh, J. J.

    1978-01-01

    Measurements on radioactive commercial p-n junction silicon cells show that these units are capable of delivering several hundred microwatts per curie of Am-241 alpha source, indicating their usefulness in such electronic devices as hearing aids, heart pacemakers, electronic watches, delay timers and nuclear dosimeter chargers. It is concluded that the Am-241 sources are superior to the beta sources used previously, because of higher alpha specific ionization and simultaneous production of low energy photons which are easily converted into photoelectrons for additional power.

  9. Integrated Power Source Grant

    Science.gov (United States)

    2001-01-01

    Traditional spacecraft power systems incorporate a solar array energy source, an energy storage element (battery), and battery charge control and bus voltage regulation electronics to provide continuous electrical power for spacecraft systems and instruments. Dedicated power conditioning components provide limited fault isolation between systems and instruments, while a centralized power-switching unit provides spacecraft load control. Battery undervoltage conditions are detected by the spacecraft processor, which removes fault conditions and non-critical loads before permanent battery damage can occur. Cost effective operation of a micro-sat constellation requires a fault tolerant spacecraft architecture that minimizes on-orbit operational costs by permitting autonomous reconfiguration in response to unexpected fault conditions. A new micro-sat power system architecture that enhances spacecraft fault tolerance and improves power system survivability by continuously managing the battery charge and discharge processes on a cell-by-cell basis has been developed. This architecture is based on the Integrated Power Source (US patent 5644207), which integrates dual junction solar cells, Lithium Ion battery cells, and processor based charge control electronics into a structural panel that can be deployed or used to form a portion of the outer shell of a micro-spacecraft. The first generation Integrated Power Source is configured as a one inch thick panel in which prismatic Lithium Ion battery cells are arranged in a 3x7 matrix (26VDC) and a 3x1 matrix (3.7VDC) to provide the required output voltages and load currents. A multi-layer structure holds the battery cells, as well as the thermal insulators that are necessary to protect the Lithium Ion battery cells from the extreme temperatures of the solar cell layer. Independent thermal radiators, located on the back of the panel, are dedicated to the solar cell array, the electronics, and the battery cell array. In deployed

  10. International Conference on Power Electronics and Renewable Energy Systems

    CERN Document Server

    Suresh, L; Dash, Subhransu; Panigrahi, Bijaya

    2015-01-01

    The book is a collection of high-quality peer-reviewed research papers presented in Proceedings of International Conference on Power Electronics and Renewable Energy Systems (ICPERES 2014) held at Rajalakshmi Engineering College, Chennai, India. These research papers provide the latest developments in the broad area of Power Electronics and Renewable Energy. The book discusses wide variety of industrial, engineering and scientific applications of the emerging techniques. It presents invited papers from the inventors/originators of new applications and advanced technologies.

  11. Fuel Cell Power Plants Renewable and Waste Fuels

    Science.gov (United States)

    2011-01-13

    Fuel Cell Power Plants Renewable and Waste Fuels DOE-DOD Workshop Washington, DC. January 13, 2011 reliable, efficient, ultra-clean Report...2011 2. REPORT TYPE 3. DATES COVERED 00-00-2011 to 00-00-2011 4. TITLE AND SUBTITLE Fuel Cell Power Plants Renewable and Waste Fuels 5a. CONTRACT...Approved for public release; distribution unlimited 13. SUPPLEMENTARY NOTES presented at the DOE-DOD Waste-to-Energy using Fuel Cells Workshop held

  12. Sources of evaluation of nuclear and renewable energy contained in the local press

    NARCIS (Netherlands)

    van der Pligt, J.; Spears, R.; Eiser, J.R.

    1987-01-01

    Examined the sources of evaluative coverage concerning nuclear power and renewable alternatives contained in local UK daily press coverage. 10 categories of source were defined for their relevance to the nuclear debate and energy issues. Out of these, only pronuclear industries and national

  13. Sources of evaluation of nuclear and renewable energy contained in the local press

    NARCIS (Netherlands)

    van der Pligt, J.; Spears, R.; Eiser, J.R.

    1987-01-01

    Examined the sources of evaluative coverage concerning nuclear power and renewable alternatives contained in local UK daily press coverage. 10 categories of source were defined for their relevance to the nuclear debate and energy issues. Out of these, only pronuclear industries and national governme

  14. The Development of Renewable Energy Sources in Turkey

    Directory of Open Access Journals (Sweden)

    Atalay ÇETİN

    2014-10-01

    Full Text Available Especially in last two decades, most of the developed and developing countries around theworld have been supporting the researches that investigate more clean and sustainable energy sources. Renewable energy sources play more important role in today’s increasingly globalized energy market because of the environmental issues and the sources of fossil fuelare becoming scarce. According to that, as a virtue of the rapidly increase in energy demand, the supply of renewable energy sources are increasingly continue around theworld. As a matter of fact, when it is compared to the 2011 rates, the consumption rate of hydro-electricity and other renewable energy sources has increased to 4.3% and % 15.2 respectively in 2012 in the world, is verifying that view.The aim of this study is to investigate the present potential and sufficiency of the main sources of renewable energy such as solar, wind, hydropower, geothermal andbiomass at Turkey. In this regard, even Turkey has a remarkable potential especially in hydro, wind, solar and geothermal energies among Europe, renewable energy sources ratio in Turkey’s total energy consumption is not rising at desired level. Furthermore becauseTurkey hasn’t got a rich fossil fuel reserves, it needs to import fossil energy sources to meet its rapidly growing energy needs. In related to this, Turkey’s current deficit has beengrowing due to the increase in fossil fuel sources prices at international energy markets. On the other side Turkey’s Green House Gases (GHGs emission has grown more thantwo times as a result of its rapidly using of fossil fuel sources due to its growing economy, industrialization and urbanization process since 1990. Within this context, as a foreigndependent country on fossil fuel energy sources (especially on crude oil and natural gas, Turkey should rapidly change its energy policy from fossil fuels to renewable energysources which are domestic, clean and much more cheaper

  15. Using Ground Source Heat Pumps for Renewable Energy

    OpenAIRE

    Xhevat BERISHA

    2017-01-01

    This paper provides background information on the current energy supply, energy demand, and energy sources in Kosovo. Moreover, it presents the country‟s current level of applying alternative energy sources. Additionally, this paper focuses on geothermal energy as a renewable energy resource with the potential to contribute to a sustainable use of resources to meet renewable energy and energy efficiency requirements of the European Union (EU), “EU 20 20 by 2020” policy. Hence, a careful analy...

  16. Fuels for transportation derived from renewable energy sources

    Energy Technology Data Exchange (ETDEWEB)

    Schindler, J.; Weindorf, W.

    2001-07-01

    There are two main reasons for introducing renewable energy sources into the transportation sector: global warming on the one hand and the imminent end of cheap oil on the other. The future use of renewable energy sources for tranportation is the only sustainable solution that protects the climate and ensures energy supply - especially it is the only conceivable way to satisfy the demand for mobility of the people in the developing countries.

  17. Proportional derivative based stabilizing control of paralleled grid converters with cables in renewable power plants

    DEFF Research Database (Denmark)

    Wang, Xiongfei; Blaabjerg, Frede; Loh, Poh Chiang

    2014-01-01

    Resonant interactions of grid-connected converters with each other and with cable capacitance are challenging the stability and power quality of renewable energy sources based power plants. This paper addresses the instability of current control of converters with the multiple resonance frequenci...

  18. A Renewably Powered Hydrogen Generation and Fueling Station Community Project

    Science.gov (United States)

    Lyons, Valerie J.; Sekura, Linda S.; Prokopius, Paul; Theirl, Susan

    2009-01-01

    The proposed project goal is to encourage the use of renewable energy and clean fuel technologies for transportation and other applications while generating economic development. This can be done by creating an incubator for collaborators, and creating a manufacturing hub for the energy economy of the future by training both white- and blue-collar workers for the new energy economy. Hydrogen electrolyzer fueling stations could be mass-produced, shipped and installed in collaboration with renewable energy power stations, or installed connected to the grid with renewable power added later.

  19. Energy Efficient Optical Networks with Minimized Non-Renewable Power Consumption

    Directory of Open Access Journals (Sweden)

    Xiaowen Dong

    2012-05-01

    Full Text Available Recent studies have shown that the Information and Communication Technology (ICT industry is responsible for about 2% of the global emission of CO2 and this percentage is expected to increase as the internet expands in bandwidth and reach. In this paper we propose a hybrid-power IP over WDM network where renewable energy is used to reduce the CO2 emission of IP over WDM networks. A Linear Programming (LP model and a novel heuristic are developed to minimize the non-renewable power consumption in the “hybrid-power” IP over WDM network. The performance of the network is studied considering two topologies, the NSFNET and the USNET. Compared with routing in the electronic layer, the results show that routing in the optical layer coupled with using renewable energy significantly reduces the CO2 emissions of the IP over WDM network by up to 73% for the NSFNET and 69% for the USNET, and the proposed heuristic has little impact on the QoS. We also develop an LP model to identify the impact of the location of nodes employing renewable energy on the non-renewable power consumption of the network. The results show that the optimum location of nodes employing renewable energy is determined according to the output power of the renewable energy sources and the power consumption of the nodes.

  20. An approach for evaluating the impact of an intermittent renewable energy source on transmission expansion planning

    Institute of Scientific and Technical Information of China (English)

    Rongrit CHATTHAWORN; Surachai CHAITUSANEY

    2015-01-01

    We propose a new robust optimization approach to evaluate the impact of an intermittent renewable energy source on transmission expansion planning (TEP). The objective function of TEP is composed of the investment cost of the transmission line and the operating cost of conventional generators. A method to select suitable scenarios representing the intermittent renewable energy generation and loads is proposed to obtain robust expansion planning for all possible scenarios. A meta-heuristic algorithm called adaptive tabu search (ATS) is employed in the proposed TEP. ATS iterates between the main problem, which minimizes the investment and operating costs, and the subproblem, which minimizes the cost of power generation from conventional generators and curtailments of renewable energy generation and loads. The subproblem is solved by nonlinear programming (NLP) based on an interior point method. Moreover, the impact of an intermittent renewable energy source on TEP was evaluated by comparing expansion planning with and without consideration of a renewable energy source. The IEEE Reliability Test System 79 (RTS 79) was used for testing the proposed method and evaluating the impact of an intermittent renewable energy source on TEP. The results show that the proposed robust optimization approach provides a more robust solution than other methods and that the impact of an intermittent renewable energy source on TEP should be considered.

  1. Development of Electricity Generation from Renewable Energy Sources in Turkey

    Science.gov (United States)

    Kentel, E.

    2011-12-01

    Electricity is mainly produced from coal, natural gas and hydropower in Turkey. However, almost all the natural gas and high quality coal are imported. Thus, increasing the shares of both hydro and other renewables in energy supply is necessary to decrease dependency of the country on foreign sources. In 2008, the total installed capacity of Turkey was around 42000 MW and 66 % of this was from thermal sources. The remaining 33 % was from hydro, which leaves only one percent for the other renewable energy sources. The share of renewable energy in the energy budget of Turkey has increased in the last two decades; however, in 2008, only 17 % of the total electricity generation was realized from renewable sources most of which was hydro. According to State Hydraulic Works (SHW) which is the primary executive state agency responsible for the planning, operating and managing of Turkey's water resources, Turkey utilizes only around 35% of its economically viable hydro potential. The current situation clearly demonstrates the need for increasing the share of renewables in the energy budget. New laws, such as the Electricity Market Law, have been enacted and the following items were identified by the Ministry of Energy and Natural Resources of Turkey among primary energy policies and priorities: (i) decreasing dependency on foreign resources by prioritizing utilization of natural resources, (ii) increasing the share of renewable energy resources in the energy budget of Turkey; (iii) minimization of adverse environmental impacts of production and utilization of natural resources. The government's energy policy increased investments in renewable energy resources; however lack of a needed legal framework brought various environmental and social problems with this fast development. The development of the share of renewable resources in the energy budget, current government policy, and environmental concerns related with renewables, and ideas to improve the overall benefits of

  2. Development Track of Renewable Power Technology in China

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    Introduction Within the context of deeper global energy shortage and increasingly more polluted environment,countries throughout the world have been actively developing renewable energy sources to replace the fossil fuel,

  3. Renewable Energy and Inter-Island Power Transmission (Presentation)

    Energy Technology Data Exchange (ETDEWEB)

    Gevorgian, V.

    2011-05-01

    This presentation summarizes recent findings pertaining to inter-island connection of renewable and other energy sources, in particular, as these findings relate cable options, routing, specifications, and pros and cons.

  4. Smart power systems and renewable energy system integration

    CERN Document Server

    2016-01-01

    This monograph presents a wider spectrum of researches, developments, and case specific studies in the area of smart power systems and integration of renewable energy systems. The book will be for the benefit of a wider audience including researchers, postgraduate students, practicing engineers, academics, and regulatory policy makers. It covers a wide range of topics from fundamentals, and modelling and simulation aspects of traditional and smart power systems to grid integration of renewables; Micro Grids; challenges in planning and operation of a smart power system; risks, security, and stability in smart operation of a power system; and applied research in energy storage. .

  5. Integrated Assessment of National Power Sources Using AHP Technique

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Seong Ho; Kim, Tae Woon; Ha, Jae Joo [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of); Chang, Soon H. [Korea Advanced Institute of Science and Technology, Daejeon (Korea, Republic of)

    2005-07-01

    Here, various national power sources including conventional as well as renewable energy systems are comparatively assessed in view of multicriteria decisionmaking (MCDM) spaces. The main objectives of this work are to understand priority of power sources and to figure out nuclear power's synergetic role in the national energy sector.

  6. How to Integrate Variable Power Source into a Power Grid

    Science.gov (United States)

    Asano, Hiroshi

    This paper discusses how to integrate variable power source such as wind power and photovoltaic generation into a power grid. The intermittent renewable generation is expected to penetrate for less carbon intensive power supply system, but it causes voltage control problem in the distribution system, and supply-demand imbalance problem in a whole power system. Cooperative control of customers' energy storage equipment such as water heater with storage tank for reducing inverse power flow from the roof-top PV system, the operation technique using a battery system and the solar radiation forecast for stabilizing output of variable generation, smart charging of plug-in hybrid electric vehicles for load frequency control (LFC), and other methods to integrate variable power source with improving social benefits are surveyed.

  7. A Review of Hybrid Renewable Energy Systems for Electric Power Generation

    OpenAIRE

    Md. Ibrahim; Abul Khair

    2015-01-01

    Integration and combined utilization of renewable energy sources are becoming increasingly attractive. This paper is a review of hybrid renewable energy systems technologies for power generation, important issues and challenges in their design stage. Generation technology selection and unit sizing, System configurations and Energy management and control are discussed. Applications of hybrid energy systems, advantages of hybrid energy systems, issues and problems related to hybrid ...

  8. Water, wind and sun: Renewable energy sources provide for 4. 3% of power consumption; German consumers support further use of alternative energies despite increased costs. Wasser, Wind und Sonne: Regenerative Energien lieferten 4,3 Prozent des Stromverbrauchs; Trotz hoher Kosten foerdern deutsche Stromverbraucher weiterhin alternative Energien

    Energy Technology Data Exchange (ETDEWEB)

    Grawe, J. (Vereinigung Deutscher Elektrizitaetswerke (VDEW), Frankfurt/Main (Germany))

    1994-06-01

    According to the VDEW's bi-annual survey on the use of renewable energies in its member firms, the power supplier produced and purchased around 19 billion Kilowatthours of power (1990: 18,8) from water; waste; biomass; wind- and solar-energy. This was a 1% increase on 1990. The purchased power around 1,6 billion KWh cam from private and communal sources. (orig.)

  9. Power Sources for Ultra Low Power Electronics

    Science.gov (United States)

    2000-06-12

    DARPA asked JASON to examine the issue of power sources for low power electronics with a specific emphasis on the properties of nuclear batteries and...integrated power sources combining power and electronics. During the 1998 Summer Study a workshop was held to provide background for the study, with

  10. Design and Implementation of Fuzzy Logic Controlled Uninterruptible Power Supply Integrating Renewable Solar Energy

    Directory of Open Access Journals (Sweden)

    Angelo A. Beltran Jr.

    2014-03-01

    Full Text Available —The control and operation of electronic systems relies and depends on the availability of the power supply. Rechargeable batteries have been more pervasively used as the energy storage and power source for various electrical and electronic systems and devices, such as communication systems, electronic devices, renewable power systems, electric vehicles, etc. However, the rechargeable batteries are subjected to the availability of the external power source when it is drained out. Because of the concern of battery life, environmental pollution and a possible energy crisis, the renewable solar energy has received an increasing attention in recent years. A fuzzy logic control based grid tied uninterruptible power supply integrating renewable solar energy can be used for electrical and electronic systems to produce power generation. This paper presents the design and implementation of fuzzy logic control based grid tied uninterruptible power supply integrating the renewable solar power energy system. The uninterruptible power supply (UPS system is characterized by the rechargeable battery that is connected with the Photovoltaic Panel through the DC/DC converter, the utility AC through the AC/DC converter and the load is connected through the DC/AC converter. The whole operation is controlled by the fuzzy logic algorithm. A complete hardware prototype system model of the fuzzy logic control based on the grid tied uninterruptible power supply integrating with the renewable solar energy is designed and implemented. The operation and effectiveness of the proposed system is then demonstrated by the actual and real time implementation of the fuzzy logic control grid tied operation uninterruptible power supply integrating renewable solar energy connected to the rechargeable battery bank and a PIC microcontroller platform for fuzzy logic control and operation

  11. STANDARD FAMILY OF POWER SOURCES

    Science.gov (United States)

    A standard family of power sources is proposed which will minimize the number and variety of power sources , prevent the flooding of the supply system...with hardware that only could be used in a single application and provide the user with a family of power sources from which he could select one...new concept in the deployment of power sources . No longer is a single power source developed for each equipment; rather, the selection of a battery

  12. Renewable energy technologies for the Indian power sector: mitigation potential and operational strategies

    Energy Technology Data Exchange (ETDEWEB)

    Ghosh, D. [Centre de Sciences Humaines, New Delhi (India); Shukla, P.R. [Indian Inst. of Management, Vastrapur, Ahmedabad (India); Garg, A. [Winrock International India, New Delhi (India); Ramana, P.V. [Winrock International, Arlington, VA (United States)

    2002-12-01

    The future economic development trajectory for India is likely to result in rapid and accelerated growth in energy demand, with attendant shortages and problems. Due to the predominance of fossil fuels in the generation mix, there are large negative environmental externalities caused by electricity generation. The power sector alone has a 40 percent contribution to the total carbon emissions. In this context, it is imperative to develop and promote alternative energy sources that can lead to sustainability of the energy-environment system. There are opportunities for renewable energy technologies under the new climate change regime as they meet the two basic conditions to be eligible for assistance under UNFCCC mechanisms: they contribute to global sustainability through GHG mitigation; and, they conform to national priorities by leading to the development of local capacities and infrastructure. This increases the importance of electricity generation from renewables. Considerable experience and capabilities exist in the country on renewable electricity technologies. But a number of techno-economic, market-related, and institutional barriers impede technology development and penetration. Although at present the contribution of renewable electricity is small, the capabilities promise the flexibility for responding to emerging economic, socio-environmental and sustainable development needs. This paper discusses the renewable and carbon market linkages and assesses mitigation potential of power sector renewable energy technologies under global environmental intervention scenarios for GHG emissions reduction. An overall energy system framework is used for assessing the future role of renewable energy in the power sector under baseline and different mitigation scenarios over a time frame of 35 years, between 2000 to 2035. The methodology uses an integrated bottom-up modelling framework. Looking into past performance trends and likely future developments, analysis results

  13. Power electronics - The key technology for Renewable Energy Systems

    DEFF Research Database (Denmark)

    Blaabjerg, Frede; Ma, Ke; Yang, Yongheng

    2014-01-01

    and effectively, energy conversion systems, currently based on power electronics technology, will again play an essential role in this energy paradigm shift. Using highly efficient power electronics in power generation, power transmission/distribution and end-user application, together with advanced control...... solutions, can pave the way for renewable energies. In light of this, some of the most emerging renewable energies, e.g. wind energy and photovoltaic, which by means of power electronics are changing character as a major part in the electricity generation, are explored in this paper. Issues like technology...... development, implementation, power converter technologies, control of the systems, and synchronization are addressed. Special focuses are paid on the future trends in power electronics for those systems like how to lower the cost of energy and to develop emerging power devices and better reliability tool....

  14. Design for Reliability of Power Electronics in Renewable Energy Systems

    DEFF Research Database (Denmark)

    Ma, Ke; Yang, Yongheng; Wang, Huai

    2014-01-01

    Power electronics is the enabling technology for maximizing the power captured from renewable electrical generation, e.g., the wind and solar technology, and also for an efficient integration into the grid. Therefore, it is important that the power electronics are reliable and do not have too many...... failures during operation which otherwise will increase cost for operation, maintenance and reputation. Typically, power electronics in renewable electrical generation has to be designed for 20–30 years of operation, and in order to do that, it is crucial to know about the mission profile of the power...... and demonstrate how the power electronics is loaded under different stressors. Further, some systematic methods to design the power electronics technology for reliability will be given and demonstrated with two cases—one is a wind power and the other is photovoltaic application....

  15. Optimal portfolio selection between different kinds of Renewable energy sources

    Energy Technology Data Exchange (ETDEWEB)

    Zakerinia, MohammadSaleh; Piltan, Mehdi; Ghaderi, Farid

    2010-09-15

    In this paper, selection of the optimal energy supply system in an industrial unit is taken into consideration. This study takes environmental, economical and social parameters into consideration in modeling along with technical factors. Several alternatives which include renewable energy sources, micro-CHP systems and conventional system has been compared by means of an integrated model of linear programming and three multi-criteria approaches (AHP, TOPSIS and ELECTRE III). New parameters like availability of sources, fuels' price volatility, besides traditional factors are considered in different scenarios. Results show with environmental preferences, renewable sources and micro-CHP are good alternatives for conventional systems.

  16. The Economics of Renewable Energy Sources into Electricity Generation in Tanzania

    Directory of Open Access Journals (Sweden)

    Baraka Kichonge

    2016-01-01

    Full Text Available The study analyzes the economics of renewable energy sources into electricity generation in Tanzania. Business as usual (BAU scenario and renewable energy (RE scenario which enforce a mandatory penetration of renewable energy sources shares into electricity generations were analyzed. The results show total investment cost for the BAU scenario is much lower as compared to RE scenario while operating and maintenance variable costs are higher in BAU scenario. Primary energy supply in BAU scenario is higher tied with less investment costs as compared to RE scenario. Furthermore, the share of renewable energy sources in BAU scenario is insignificant as compared to RE scenario due to mandatory penetration policy imposed. Analysis concludes that there are much higher investments costs in RE scenario accompanied with less operating and variable costs and lower primary energy supply. Sensitivity analysis carried out suggests that regardless of changes in investments cost of coal and CCGT power plants, the penetration of renewable energy technologies was still insignificant. Notwithstanding the weaknesses of renewable energy technologies in terms of the associated higher investments costs, an interesting result is that it is possible to meet future electricity demand based on domestic resources including renewables.

  17. Opportunities for renewable energy sources in Central Asia countries

    Energy Technology Data Exchange (ETDEWEB)

    Obozov, A.J. [Project KUN (Kyrgyzstan); Loscutoff, W.V. [National Renewable Energy Lab., Golden, CO (United States)

    1998-07-01

    This report presents an overview of the state of conventional energy sources and the potential for development of renewable energy sources in the Central Asia countries of Kazakhstan, Uzbekistan, Kyrgyzstan, Turkmenistan, and Tajikistan. The region has a population of about 50 million in an area of more than four million square kilometers. The per capita gross internal product is more than $2,500, although the economy has been declining the past five years. The area has substantial coal, oil, uranium, and natural gas reserves, although they are not distributed equally among the five countries. Energy production is such that the countries do not have to rely heavily on imports. One of the problems in Central Asia is that the energy prices are substantially below the world prices. This is a factor in development of renewable energy sources. The primary renewable energy resources available are wind in Kazakhstan, solar in the entire region, biomass in Kyrgyzstan, and micro-hydropower stations in Kazakhstan and Kyrgyzstan. All of these have the potential to provide a significant amount of the required energy for the region. However, all of the countries have an abundance of various renewable energy resources. To effectively use these resources, however, a number of barriers to their development and commercialization must be overcome. These include low prices of conventional energy sources, absence of legislative support, lack of financing for new technologies, and lack of awareness of renewable energy sources by the population. A number of specific actions are proposed to overcome these barriers. These include establishment of a Central Asia coordinating council for renewable energy, development of a regional renewable energy program, and setting up a number of large demonstration projects. 16 figs.

  18. The Demand Side Management Potential to Balance a Highly Renewable European Power System

    Directory of Open Access Journals (Sweden)

    Alexander Kies

    2016-11-01

    Full Text Available Shares of renewables continue to grow in the European power system. A fully renewable European power system will primarily depend on the renewable power sources of wind and photovoltaics (PV, which are not dispatchable but intermittent and therefore pose a challenge to the balancing of the power system. To overcome this issue, several solutions have been proposed and investigated in the past, including storage, backup power, reinforcement of the transmission grid, and demand side management (DSM. In this paper, we investigate the potential of DSM to balance a simplified, fully renewable European power system. For this purpose, we use ten years of weather and historical load data, a power-flow model and the implementation of demand side management as a storage equivalent, to investigate the impact of DSM on the need for backup energy. We show that DSM has the potential to reduce the need for backup energy in Europe by up to one third and can cover the need for backup up to a renewable share of 67%. Finally, it is demonstrated that the optimal mix of wind and PV is shifted by the utilisation of DSM towards a higher share of PV, from 19% to 36%.

  19. Decentralized and Real-Time Power Dispatch Control for an Islanded Microgrid Supported by Distributed Power Sources

    OpenAIRE

    Changsun Ahn; Huei Peng

    2013-01-01

    Microgrids can deploy traditional and/or renewable power sources to support remote sites. Utilizing renewable power sources requires more complicated control strategies to achieve acceptable power quality and maintain grid stability. In this research, we assume that the grid stability problem is already solved. As a next step, we focus on how the power can be dispatched from multiple power sources for improved grid efficiency. Isolated microgrids frequently require reconfigurations because of...

  20. Overview of Power Generation Sector of Bangladesh and Proposed Grid Connected Hybrid Renewable Energy System

    Directory of Open Access Journals (Sweden)

    Md. Raju Ahmed

    2014-11-01

    Full Text Available Electricity is the most usable form of energy, and one of the most crucial strategic issues for the sustainable development of a country. The projection of demand of electricity is an integral part of the planning process. Severe power crisis compelled the government to enter into contractual agreements for high-cost temporary solution such as rental power and small IPPS, on an emergency basis, most of these are diesel or liquid-fuel based. Load shading is an acute problem for the country. The country is confronting a simultaneous shortage of electricity. However, the country has substantial amount of renewable energy resources. The overview of power generation section of Bangladesh is presented; the potentiality of renewable energy sources in Bangladesh is discussed. Finally, a grid connected hybrid renewable energy system is proposed to overcome the problem of power crisis using sustainable clean energy at rural area.

  1. Renewable Energy Solar Power Surges On

    Institute of Scientific and Technical Information of China (English)

    DAVID HENDRICKSON

    2006-01-01

    @@ With the increased focus and attention solar power is receiving around the world as a potentially significant energy alternative, it makes sense that China's solar enterprises are today doing big business and raking in massive profits. Among the most notable returns have been those of newcomer Suntech Power Holdings.

  2. Power fluctuation reduction methodology for the grid-connected renewable power systems

    Science.gov (United States)

    Aula, Fadhil T.; Lee, Samuel C.

    2013-04-01

    This paper presents a new methodology for eliminating the influence of the power fluctuations of the renewable power systems. The renewable energy, which is to be considered an uncertain and uncontrollable resource, can only provide irregular electrical power to the power grid. This irregularity creates fluctuations of the generated power from the renewable power systems. These fluctuations cause instability to the power system and influence the operation of conventional power plants. Overall, the power system is vulnerable to collapse if necessary actions are not taken to reduce the impact of these fluctuations. This methodology aims at reducing these fluctuations and makes the generated power capability for covering the power consumption. This requires a prediction tool for estimating the generated power in advance to provide the range and the time of occurrence of the fluctuations. Since most of the renewable energies are weather based, as a result a weather forecast technique will be used for predicting the generated power. The reduction of the fluctuation also requires stabilizing facilities to maintain the output power at a desired level. In this study, a wind farm and a photovoltaic array as renewable power systems and a pumped-storage and batteries as stabilizing facilities are used, since they are best suitable for compensating the fluctuations of these types of power suppliers. As an illustrative example, a model of wind and photovoltaic power systems with battery energy and pumped hydro storage facilities for power fluctuation reduction is included, and its power fluctuation reduction is verified through simulation.

  3. A Stochastic Calculus for Network Systems with Renewable Energy Sources

    CERN Document Server

    Wu, Kui; Marinakis, Dimitri

    2011-01-01

    We consider the performance modeling and evaluation of network systems powered with renewable energy sources such as solar and wind energy. Such energy sources largely depend on environmental conditions, which are hard to predict accurately. As such, it may only make sense to require the network systems to support a soft quality of service (QoS) guarantee, i.e., to guarantee a service requirement with a certain high probability. In this paper, we intend to build a solid mathematical foundation to help better understand the stochastic energy constraint and the inherent correlation between QoS and the uncertain energy supply. We utilize a calculus approach to model the cumulative amount of charged energy and the cumulative amount of consumed energy. We derive upper and lower bounds on the remaining energy level based on a stochastic energy charging rate and a stochastic energy discharging rate. By building the bridge between energy consumption and task execution (i.e., service), we study the QoS guarantee under...

  4. Power System Transformation toward Renewables: Investment Scenarios for Germany

    OpenAIRE

    2014-01-01

    We analyze distinctive investment scenarios for the integration of fluctuating renewables in the German power system. Using a combined model for dispatch, transmission, and investment, three different investment options are considered, including gas-fired power plants, pumped hydro storage, and transmission lines. We find that geographically optimized power plant investments dominate in the reference scenarios for 2024 and 2034. In scenarios with decreasedrenewable curtailment, storage and tr...

  5. Risoe energy report 5. Renewable energy for power and transport

    Energy Technology Data Exchange (ETDEWEB)

    Larsen, Hans; Soenderberg Petersen, L. (eds.)

    2006-11-15

    The global energy policy scene today is dominated by three concerns, namely security of supply, climate change and energy for development and poverty alleviation. This is the starting point for Risoe Energy Report 5 that addresses status and trends in renewable energy, and gives an overview of global driving forces for transformation of the energy systems in the light of security of supply, climate change and economic growth. More specifically status and trends in renewable energy technologies, for broader applications in off grid power production (and heat) will be discussed. Furthermore the report will address wider introduction of renewable energy in the transport sector, for example renewable based fuels, hybrid vehicles, electric vehicles and fuel cell driven vehicles. (au)

  6. Cationically polymerizable monomers derived from renewable sources. Annual performance report

    Energy Technology Data Exchange (ETDEWEB)

    Crivello, J.V.

    1992-10-01

    The objectives of this project are to design and synthesize novel monomers which orginate from renewable biological sources and to carry out their rapid, efficient, pollution-free and energy efficient cationic polymerization to useful products under the influence of ultraviolet light or heat. A summary of the results of the past year`s research on cationically polymerizable monomers derived from renewable sources is presented. Three major areas of investigation corresponding to the different classes of naturally occurring starting materials were investigated; epoxidized terpenes and natural rubber and vinyl ethers from alcohols and carbohydrates.

  7. Electricity Storage and Renewables for Island Power. A Guide for Decision Makers

    Energy Technology Data Exchange (ETDEWEB)

    Komor, P.; Glassmire, J. [University of Colorado, Boulder, CO (United States)

    2012-05-15

    Energy is a key issue for sustainable development. In island and remote communities, where grid extension is difficult and fuel transportation and logistics are challenging and costly, renewable energy is emerging as the energy supply solution for the 21st century, ensuring reliable and secure energy supply in such communities. The deployment of renewable energy technologies is increasing globally, supported by rapidly declining prices and government policies and strategies in many countries, resulting in renewable energy solutions being the most cost-effective option in many markets today. For example, in 2011 the Special Report of the IPCC (Intergovernmental Panel on Climate Change) on Renewable Energy Sources and Climate Change Mitigation showed that approximately 50% of new electricity generation capacity added globally between 2008 and 2009 came from renewable energy sources. Therefore, the future of renewables as the base energy source for islands and remote communities looks very bright. However, as the share of renewables in power supply increases, the natural variability of some renewable energy sources must be tackled appropriately to ensure continuous availability and efficient use of the energy generated. Successful strategies to manage this variability can encompass a range of measures, such as a balanced supply technology portfolio, geographical spread of supply, better forecasting tools, demand-side management and appropriate storage solutions. Traditionally, large scale electricity storage systems were based on pumped hydropower installations. New solutions are emerging, including affordable and long-lasting batteries. This technology field is developing rapidly and prices are falling. IRENA has developed this report as a practical guide to the available energy storage solutions and their successful applications in the context of islands communities. The report also includes various best practice cases and different scenarios and strategies. It is

  8. Experimentation with a reverse osmosis plant powered by renewable energies

    Energy Technology Data Exchange (ETDEWEB)

    Segura, L.; Gomez, A. [Las Palmas de Gran Canaria Univ., Las Palmas (Spain). Dept. of Process Engineering; Nuez, I. [Las Palmas de Gran Canaria Univ., Las Palmas (Spain). Dept. of Electronic and Automatic Engineering

    2006-07-01

    This paper described a set of tests conducted in a reverse osmosis plant powered by renewable energy sources. Variations on feed flow, reject flow, recovery and power consumption were investigated. The plant has a production of over 115 m{sup 3} per day. During the experiments, the plant was required to operate at variable loading conditions. An energy recovery system was then developed to operate effectively with the observed variable load conditions. The system was incorporated within the reject flow system and was comprised of a Pelton turbine matched to the axis of an asynchronous energy generator. The system was designed to avoid making changes to the actual hydraulic circuit of the plant. Recovery system failures did not necessitate plant stoppages during the testing period. Simulations conducted to assess the energy system showed that optimal performance of the plant was between 16 and 18 kW with a working pressure of between 57 to 67 bars. Results also suggested that installing the system in the evacuation brine line would maximize the use of kinetic energy. It was concluded that energy recovery systems are ideal for use in seawater installations where functioning pressure levels are high. 14 refs., 1 tab., 5 figs.

  9. Opportunities of energy supply of farm holdings on the basis of small-scale renewable energy sources

    Science.gov (United States)

    Efendiev, A. M.; Nikolaev, Yu. E.; Evstaf'ev, D. P.

    2016-02-01

    One of the major national economic problems of Russia is raising of agricultural production, which will provide strategic security and sustainable supply of the population with provisions. Creation of subsidiary small holdings, farm holdings, and peasant farm holdings will require addressing issues of energy supply. At considerable distance of small farms from centralized energy systems (by fuel, electricity and thermal energy) it is proposed to create a system of local energy networks on the basis of low-powered power plants using renewable energy sources (RES). There is economic unreasonableness of use of imported components of small power plants. Creation of new combined small power plants on renewable energy sources produced by domestic manufacturers is recommended. Schemes of arrangements of small power plants based on renewable energy sources are proposed, variants and characteristics of a basic source are provided—biogas plants developed by the authors. Calculations revealed that heat and power supply of self-contained farms distant from small power plants based on renewable energy sources is 2.5-2.6 times cheaper than from centralized networks. Production of biogas through anaerobic fermentation of organic waste of cattle complexes is considered as the basis. The analysis of biowaste output in various cattle farms is carried out, and the volume of biogas is determined to meet the requirements of these farms in electrical and thermal energy. The objective of the present article is to study the possibility of creating small combined power plants in Russia based on renewable sources of energy for independent consumers.

  10. Comparison among mechanisms of incentive to alternative sources for renewable generation of electric power and planning of system expansion in Brazil, Argentine and Chile; Comparacao entre mecanismos de incentivo as fontes alternativas para geracao renovavel de eletricidade e planejamento da expansao do sistema no Brasil, Argentina e Chile

    Energy Technology Data Exchange (ETDEWEB)

    Nogueira, Larissa Goncalves; Dedecca, Joao Gorestein; Jannuzzi, Gilberto de Martinno [Universidade Estadual de Campinas (PPSE/UNICAMP), SP (Brazil). Programa de Planejamento de Sistemas Energeticos], Emails: larissa@fem.unicamp.br, jdedecca@fem.unicamp.br, jannuzzi@fem.unicamp.br; Gomes, Rodolfo Dourado [International Energy Initiative (IEI), Campinas, SP (Brazil)], E-mail: rodolfo@iei-la.org

    2010-07-01

    To study the insertion of the renewable energy sources (RES) in the national electrical power matrixes is interesting to analyse the adequacy and coherence of the of the mechanisms which make the inversion in generation from the conventional sources and that which incentive the generation from the RES. It is important to notice that the existence of coherent mechanisms do not mean that they are efficient, but only that their influence on the generation enterprises are similar.

  11. Non-renewable and intermittent renewable energy sources: friends and foes?

    OpenAIRE

    Baranes, Edmond; JACQMIN, Julien; Jean-Christophe POUDOU

    2015-01-01

    This paper studies the links between non-renewable and intermittent renewable energy sources in the production of electricity. Using U.S. state-level data from 1998 to 2015, we find that the relationship between the price of natural gas and investments in solar and wind capacity is non-linear and can be represented by an inverted U-shape. Hence, for relatively low natural gas prices, the two modes of production are substitutes. After a price threshold is reached, the two ...

  12. Biochar As a Renewable Energy Source

    Science.gov (United States)

    Stein, Richard

    2011-11-01

    Biochar is a form of charcoal prepared by heating biomass in limited air. It is porous and has high surface area, maintaining much of the morphology of the biomass. The heat for its preparation arises primarily from burning volatiles emitted upon heating. About half the chemical energy in the biomass is contained in the biochar, about 40% is used for the conversion, and about 10% may be used as a local heat source. The biochar can serve as a soil additive where it acts as a template for the growth of bacteria and fungi which then lead to improved growth of biomass by as much as several hundred percent. It remains inert in the soil for many years. Thus, it sequesters the carbon, originally coming from the carbon dioxide absorbed during the photosynthesis occurring during the growth of the biomass. Its use reduces fertilizer and water needs and to pollution arising from the run-off of fertilizer and emission of noxious vapors. Its use is best done at a local level, close to sources of biomass from farm and forest waste. The Pioneer Valley Biochar Initiative along with the Center of Agriculture of the University of Massachusetts, Amherst is promoting the use of biochar on local farms which reduces their dependence on energy arising from fossil fuel and nuclear sources.

  13. Synchronization of grid-connected renewable energy sources under highly distorted voltages and unbalanced grid faults

    DEFF Research Database (Denmark)

    Hadjidemetriou, Lenos; Kyriakides, Elias; Blaabjerg, Frede

    2013-01-01

    renewable energy systems. Therefore, the performance of the new PLL can increase the quality of the injected power under abnormal conditions and in addition enable the renewable energy systems to provide the appropriate support to the grid under balanced and unbalanced grid faults.......Renewable energy sources require accurate and appropriate performance not only under normal grid operation but also under abnormal and faulty grid conditions according to the modern grid codes. This paper proposes a novel phase-locked loop algorithm (MSHDC-PLL), which can enable the fast...... and dynamic synchronization of the interconnected renewable energy system under unbalanced grid faults and under highly harmonic distorted voltage. The outstanding performance of the suggested PLL is achieved by implementing an innovative multi-sequence/harmonic decoupling cell in order to dynamically cancel...

  14. On the global and regional potential of renewable energy sources

    NARCIS (Netherlands)

    Hoogwijk, Monique Maria

    2004-01-01

    In this thesis, the central research question is: what can be the contribution of renewable energy sources to the present and future world and regional energy supply system. The focus is on wind, solar PV and biomass energy (energy crops) for electricity generation. For the assessment of the economi

  15. On the global and regional potential of renewable energy sources

    NARCIS (Netherlands)

    Hoogwijk, Monique Maria

    2004-01-01

    In this thesis, the central research question is: what can be the contribution of renewable energy sources to the present and future world and regional energy supply system. The focus is on wind, solar PV and biomass energy (energy crops) for electricity generation. For the assessment of the economi

  16. Overview of village scale, renewable energy powered desalination

    Energy Technology Data Exchange (ETDEWEB)

    Thomas, K.E.

    1997-04-01

    An overview of desalination technologies is presented, focusing on those technologies appropriate for use in remote villages, and how they can be powered using renewable energy. Technologies are compared on the basis of capital cost, lifecycle cost, operations and maintenance complexity, and energy requirements. Conclusions on the appropriateness of different technologies are drawn, and recommendations for future research are given.

  17. Guide to purchasing green power. Renewable electricity, renewable energy certificates and on-site renewable generation

    Energy Technology Data Exchange (ETDEWEB)

    None

    2004-09-30

    The Guide to Purchasing Green Power is intended for organizations that are considering the merits of buying green power as well as those that have decided to buy it and want help doing so. The Guide was written for a broad audience, including businesses, government agencies, universities, and all organizations wanting to diversify their energy supply and to reduce the environmental impact of their electricity use.The Guide provides an overview of green power markets and describes the necessary steps to buying green power. This section summarizes the Guide to help readers find the information they need.

  18. Power electronics for renewable energy systems, transportation and industrial applications

    CERN Document Server

    Malinowski, Mariusz; Al-Haddad, Kamal

    2014-01-01

    Power Electronics for Renewable Energy, Transportation, and Industrial Applications combines state-of-the-art global expertise to present the latest research on power electronics and its application in transportation, renewable energy, and different industrial applications. This timely book aims to facilitate the implementation of cutting-edge techniques to design problems offering innovative solutions to the growing power demands in small- and large-size industries. Application areas in the book range from smart homes and electric and plug-in hybrid electrical vehicles (PHEVs), to smart distribution and intelligence operation centers where significant energy efficiency improvements can be achieved through the appropriate use and design of power electronics and energy storage devices.

  19. Wind Power - A Power Source Enabled by Power Electronics

    DEFF Research Database (Denmark)

    Blaabjerg, Frede; Chen, Zhe

    2004-01-01

    . The deregulation of energy has lowered the investment in bigger power plants, which means the need for new electrical power sources may be very high in the near future. Two major technologies will play important roles to solve the future problems. One is to change the electrical power production sources from...... electronics is changing from being a minor energy source to be acting as an important power source. By that wind power is also getting an added value....

  20. Renewable Production of Water, Hydrogen, and Power From Ambient Moisture

    Science.gov (United States)

    2016-12-01

    PRODUCTION OF WATER , HYDROGEN, AND POWER FROM AMBIENT MOISTURE by Angel Aviles December 2016 Thesis Advisor: Garth V. Hobson Co-Advisor...AND DATES COVERED Master’s thesis 4. TITLE AND SUBTITLE RENEWABLE PRODUCTION OF WATER , HYDROGEN, AND POWER FROM AMBIENT MOISTURE 5. FUNDING...12b. DISTRIBUTION CODE 13. ABSTRACT (maximum 200 words ) This thesis developed a concept design and prototype system capable of increasing and

  1. Wind power and micro-hydro generation: proceedings of the East Midland Universities Renewable Energy Group

    Energy Technology Data Exchange (ETDEWEB)

    Twidell, J. [De Montfort Univ., Leicester (United Kingdom)

    1995-07-01

    This document introduces the proceedings of the East Midland Universities Renewable Energy Group, a forum for young post-graduate students. The conference included papers on wind power and small-scale hydroelectric power as sources for electric power, including theoretical investigations of wind turbine structures and control and analysis of electric motors adapted as generators for micro-hydro sets, the strategy for micro-hydro developments and the integration of wind and photovoltaic power, backed up by combined heat and power plant. (UK)

  2. Towards Automated Provisioning and Emergency Handling in Renewable Energy Powered Datacenters

    Institute of Scientific and Technical Information of China (English)

    李超; 王锐; 胡杨; 周睿晋; 刘铭; 刘成军; 袁景凌; 李涛; 钱德沛

    2014-01-01

    Designing eco-friendly system has been at the forefront of computing research. Faced with a growing concern about the server energy expenditure and the climate change, both industry and academia start to show high interest in computing systems powered by renewable energy sources. Existing proposals on this issue mainly focus on optimizing resource utilization or workload performance. The key supporting hardware structures for cross-layer power management and emergency handling mechanisms are often left unexplored. This paper presents GreenPod, a research framework for exploring scalable and dependable renewable power management in datacenters. An important feature of GreenPod is that it enables joint management of server power supplies and virtualized server workloads. Its interactive communication portal between servers and power supplies allows datacenter operators to perform real-time renewable energy driven load migration and power emergency handling. Based on our system prototype, we discuss an important topic: virtual machine (VM) workloads survival when facing extended utility outage and insuffcient onsite renewable power budget. We show that whether a VM can survive depends on the operating frequencies and workload characteristics. The proposed framework can greatly encourage and facilitate innovative research in dependable green computing.

  3. Renewable Energy Essentials: Concentrating Solar Thermal Power

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2009-07-01

    Concentrated solar thermal power (CSP) is a re-emerging market. The Luz Company built 354 MWe of commercial plants in California, still in operations today, during 1984-1991. Activity re-started with the construction of an 11-MW plant in Spain, and a 64-MW plant in Nevada, by 2006. There are currently hundreds of MW under construction, and thousands of MW under development worldwide. Spain and the United States together represent 90% of the market. Algeria, Egypt and Morocco are building integrated solar combined cycle plants, while Australia, China, India, Iran, Israel, Italy, Jordan, Mexico, South Africa and the United Arab Emirates are finalising or considering projects. While trough technology remains the dominant technology, several important innovations took place over 2007-2009: the first commercial solar towers, the first commercial plants with multi-hour capacities, the first Linear Fresnel Reflector plants went into line.

  4. Renewable energy sources in the Mexican electrical sector

    Energy Technology Data Exchange (ETDEWEB)

    Rodriguez, V. [Univ. Nacional Autonoma de Mexico, Div. de Estudios de Postrado, Facultad de Ingenieria, Coyoacan (Mexico); Martinez, J.H. [Univ. Nacional Autonoma de Mexico, Posgrado en Estudios Latinoamericanos, Facultad de Filosofia y Letras, Div. de Estudios de Posgrado, Coyoacan (Mexico); Ruiz, B.J.

    2008-07-01

    This paper analyzes the role of the renewable energy sources (RES) in the Mexican electrical sector in the context of the proposed renewable energy bill currently under consideration in the Mexican Congress. This paper was divided in three parts. The first part consists of a chronology of institutional background related to RES. The second part is an analysis of the coordination and management system of the Mexican electrical sector, which can facilitate the promotion of RES without significant structural changes. Finally, the pros and cons of the renewable energy bill are analyzed in order to demonstrate the need for greater coherence between the bill and the coordination system. It is concluded that when inconsistency is eliminated, RES would strongly be promoted in Mexico. (orig.)

  5. Renewable energy sources in the Mexican electricity sector

    Energy Technology Data Exchange (ETDEWEB)

    Ruiz, B.J.; Rodriguez-Padilla, V. [Universidad Nacional Autonoma de Mexico, DEPFI, Edificio A 1 piso Bernardo Quintana, Circuito Exterior, C.U., Coyoacan, C.P. (Mexico); Martinez, J.H. [Universidad Nacional Autonoma de Mexico, Posgrado en Estudios Latinoamericanos, Facultad de Filosofia y Letras, Division de Estudios de Posgrado, Circuito Exterior, C.U., Coyoacan (Mexico)

    2008-06-15

    This paper analyzes the role of renewable energy sources (RES) in the Mexican electricity sector in the context of the proposed renewable energy bill currently under consideration in the Mexican Congress. This paper was divided into three parts. The first part presents a chronology of institutional background related to the RES. This is followed by an analysis of the coordination and management system of the Mexican electricity sector, which can facilitate the promotion and integration of the RES without significant structural changes. Finally, the pros and cons of the renewable energy bill are analyzed in order to demonstrate the need for greater coherence between the bill and the coordination system of the sector. It is concluded that when inconsistency is eliminated, RES would strongly be promoted in Mexico. (author)

  6. Design for micro-combined cooling, heating and power systems stirling engines and renewable power systems

    CERN Document Server

    2015-01-01

    ‘Design for Micro-Combined Cooling, Heating & Power Systems’ provides a manual for the technical and structural design of systems for supplying decentralised energy in residential buildings. It presents the micro-combined cooling, heating & power systems Stirling engines & renewable energy sources (mCCHP-SE-RES) systems in an accessible manner both for the public at large, and for professionals who conceive, design or commercialise such systems or their components.  The high performance levels of these systems are demonstrated within the final chapter by the results of an experiment in which a house is equipped with a mCCHP-SE-RES system. The reader is also familiarized with the conceptual, technical and legal aspects of modern domestic energy systems; the components that constitute these systems; and advanced algorithms for achieving the structural and technical design of such systems. In residential buildings, satisfying demands of durable development has gradually evolved from necessity to...

  7. Promotion of Renewable Energy Sources in the European Union

    Directory of Open Access Journals (Sweden)

    Roland Menges

    2015-10-01

    Full Text Available One of the important goals of European energy policy is to increase the share of renewable energy resources in the energy supply. The instruments used in the member states are not fully compatible with the rules of the European internal market. In a theoretical section, this paper analyses possible different instruments for promoting renewable energy. Some countries use feed in tariffs - using fixed prices to increase incentives for producers to invest into renewable energy, other countries use quantity-based systems like quotas that lead to a premium above the market price. In an institutional analysis we show that on the basis of effectiveness and efficiency considerations for the European Union, in the long-term quantity oriented systems of promotion are preferable if combined with elements of a capacity market. The main reason for this conclusion is that price-based systems cannot give enough incentives for backup capacities necessary to cope with intermittent production of renewable sources. In addition price-based systems violate the basic rules of the open internal European market because feed in tariffs are a considerable barrier for trade of renewable energy products.

  8. Suppressing the non-Gaussian statistics of Renewable Power from Wind and Solar

    CERN Document Server

    Anvari, M; Tabar, M Reza Rahimi; Wächter, M; Milan, P; Heinemann, D; Peinke, Joachim; Lorenz, E

    2015-01-01

    The power from wind and solar exhibits a nonlinear flickering variability, which typically occurs at time scales of a few seconds. We show that high-frequency monitoring of such renewable powers enables us to detect a transition, controlled by the field size, where the output power qualitatively changes its behaviour from a flickering type to a diffusive stochastic behaviour. We find that the intermittency and strong non-Gaussian behavior in cumulative power of the total field, even for a country-wide installation still survives for both renewable sources. To overcome the short time intermittency, we introduce a time-delayed feedback method for power output of wind farm and solar field that can change further the underlying stochastic process and suppress their strong non- gaussian fluctuations.

  9. Design for reliability in power electronics in renewable energy systems – status and future

    DEFF Research Database (Denmark)

    Wang, Huai; Blaabjerg, Frede; Ma, Ke

    2013-01-01

    Advances in power electronics enable efficient and flexible interconnection of renewable sources, loads and electric grids. While targets concerning efficiency of power converters are within reach, recent research endeavors to predict and improve their reliability to ensure high availability, low......, the lifetime prediction of reliability-critical components IGBT modules is discussed in a 2.3 MW wind power converter. Finally, the challenges and opportunities to achieve more reliable power electronic converters are discussed....... maintenance costs, and herefore, low Levelized-Cost-of-Energy (LCOE) of renewable energy systems. This paper presents the prior-art Design for Reliability (DFR) process for power converters and addresses the paradigm shift to Physics-of-Failure (PoF) approach and mission profile based analysis. Moreover...

  10. Analysis of performance with variable stroke of a torque based renewable micro hydro power generation plant

    Science.gov (United States)

    Alam, Muhammad Mahbubul; Rahman, Md. Shad; Sultan, Rasel A.; Naif, M. Ahmed

    2016-07-01

    The most important addition of modern science is renewable energy. And the most useful and the most cheaply renewable power generation source is Hydropower. Flowing water creates energy that can be captured and turned into electricity. This is called Hydroelectric power or Hydropower. Hydropower is considered a renewable energy resource because it uses the earth's water cycle to generate electricity. Water evaporates from the earth's surface, forms clouds, precipitates back to earth, and flows toward the ocean. As far as Bangladesh is concerned, only a small fraction of electricity is generated by hydropower. The government has set a target of meeting 5 per cent of the electricity demand by 2015 by utilizing renewable energy and 10 per cent by the year 2020. Currently, renewable energies contribute to less than 1 per cent of the country's total electricity generation. The aim of our analysis is to demonstrate and observe the hydropower of our country in micro-scale by our experimental setup which is completely new in concept. This paper consists results of our findings and we find larger the number of stroke higher the rpm correspondingly higher efficiency. We find maximum rpm for 2stroke when fixed fly wheel weight was 18Kg and water was 10liter. It might help in case of utilizing this renewable energy potential at high scale.

  11. POWER SOURCES FOR ELECTRIC CARS.

    Science.gov (United States)

    An extrapolation, based on extensive experience with battery and fuel cell power sources during various Army programs, is made into the future world...of the electric car and speculates on the power sources most suited as the electrical energy source. The conclusion is that both the battery and the

  12. Renewable energy sources for the world's poor: a review of current international development assistance programs

    Energy Technology Data Exchange (ETDEWEB)

    Ashworth, J. H.

    1979-10-01

    Foreign assistance funding of the creation, testing, and use of renewable energy sources concerning worldwide efforts to provide energy for Third World development is examined. Donor agencies and developing nations give serious attention to technologies that have been considered exotic and marginal: small-scale hydroelectric generation, solar water heating and distillation, biomass conversion to methane gas and alcohol, wind power, photovoltaic-powered small-scale irrigation, and village-level solar-powered absorption refrigeration. An initial effort to assist in the international coordination of donor activity and in the sharing of information generated by foreign-assistance projects that use renewable energy sources is reported. The report mainly provides information about specific development projects. It contains only a few of the projects that have been approved and funded by 1 June 1979. (MCW)

  13. Technologies. [space power sources

    Science.gov (United States)

    Brandhorst, Henry W., Jr.

    1992-01-01

    Energy technologies to meet the power requirements of future space missions are reviewed. Photovoltaic, solar dynamic, and solar thermal technologies are discussed along with techniques for energy storage and power management and distribution.

  14. Issues, Challenges, Causes, Impacts and Utilization of Renewable Energy Sources - Grid Integration

    Directory of Open Access Journals (Sweden)

    Er. Mamatha Sandhu

    2014-03-01

    Full Text Available The renewable energy sources have increased significantly due to environmental issues and fossil fuels elevated cost. Integration of renewable energy sources to utility grid depends on the scale of power generation. Large scale power generations are connected to transmission systems where as small scale distributed power generation is connected to distribution systems. There are certain challenges in the integration of both types of systems directly. Due to this, wind energy has gained a lot of investments from all over the world. However, due to the wind speed‘s uncertain behavior it is difficult to obtain good quality power, since wind speed fluctuations reflect on the voltage and active power output of the electric machine connected to the wind turbine. Solar penetration also changes the voltage profile and frequency response of the system and affects the transmission and distribution systems of utility grid. This paper presents a review in the issues, challenges, causes, impacts and utilization of renewable energy sources (RES - Grid Integration.

  15. Jet stream wind power as a renewable energy resource: little power, big impacts

    Directory of Open Access Journals (Sweden)

    L. M. Miller

    2011-11-01

    climatic impacts due to a substantial increase of heat transport across the jet streams in the upper atmosphere. This results in upper atmospheric temperature differences of >20 °C, greater atmospheric stability, substantial reduction in synoptic activity, and substantial differences in surface climate. We conclude that jet stream wind power does not have the potential to become a significant source of renewable energy.

  16. Jet stream wind power as a renewable energy resource: little power, big impacts

    Directory of Open Access Journals (Sweden)

    L. M. Miller

    2011-06-01

    , substantial reduction in synoptic activity, and substantial differences in surface climate. We conclude that jet stream wind power does not have the potential to become a significant source of renewable energy.

  17. Design of smart power grid renewable energy systems

    CERN Document Server

    Keyhani, Ali

    2011-01-01

    To address the modeling and control of smart grid renewable energy system into electric power systems, this book integrates three areas of electrical engineering: power system engineering, control systems engineering and power electronics  The approach to the integration of these three areas differs from classical methods. Due to complexity of this task, the author has decided to present the basic concepts, and then present a simulation test bed in matlab to use these concepts to solve a basic problem in development of smart grid energy system. Therefore, each chapter has three parts: first a

  18. ACCELERATING THE ADOPTION PROCESS OF RENEWABLE ENERGY SOURCES AMONG SMES

    Directory of Open Access Journals (Sweden)

    Mirjam Leloux

    2015-07-01

    Full Text Available By 2020, intermittent renewable small scale energy sources (e.g. wind and solar energy are expected to represent about 17% of the EU’s total electricity consumption. All national overriding energy policy objectives are to ensure competitive, secure and sustainable energy for the economy and for society. Renewable energy, allied with energy efficiency, is often found crucial to meet these goals of secure sustainable and competitive energy supplies reducing dependency on expensive fossil imports and underpinning the move towards a low carbon economy while delivering green jobs to the economy. This all contributes to national competitiveness and the jobs and economic growth agenda. However, a straight forward implementation of renewable energy options is not easy, due to various barriers and obstacles. For most SMEs, the concept of generating their own renewable energy is still more of academic than genuine interest. In general, several barriers are experienced, such as high capital investments, slow return on investment, and the lack of knowledge of the benefits. There is a need for education on the benefits and drawbacks of sustainable energy, as well as a greater contribution to costs for this to work. In this paper we describe the intermediate outcomes of a European Partnership under the name of GREAT (Growing Renewable Energy Applications and Technologies, funded under the INTERREG IVB NWE Programme. GREAT aims to encourage communities and small to medium size enterprises (SMEs in Ireland, the United Kingdon, Belgium and The Netherlands to develop technological solutions for Smart Grid, Renewable Energy and Distributive Generation; research and develop policy issues for regulatory authorities and provide structured co-operation opportunities between SMEs and research institutes / technology developers. We developed GREAT spreadsheets to facilitate SMEs in each country to calculate the return-on-investment of renewable energy sources, such as

  19. Renewable power production in a Pan-Caribbean energy grid

    Science.gov (United States)

    Miller, David

    The Small Island Developing States of the Caribbean are victims of geography and geopolitics. Lacking access to large fossil fuel reserves, they are forced to import fuel at prices they have no control over. Renewable energy resources, particularly wind, have the potential to help break the Caribbean dependency on fossil fuels and allow for increased development at the same time. Working from a sustainable development point of view, this project discusses the history of the area, the theoretical background for the idea of large scale renewable power production, the regional initiatives already in place that address both the cost of fossil fuels and the policy hurdles that need to be overcome to assist the region in gaining energy independence. Haiti is highlighted as a special case in the region and the potential use of several renewable resources are discussed, along with a potential business model based on the idea of the Internet. Power storage is covered, specifically the potential of battery operated vehicles to have a positive impact on the Caribbean region and other developing states. The role of government regulation and policy comes into play next, followed by a discussion on the need for developed states to change patterns of behavior in order to achieve sustainability. Finally, nuclear power and liquefied natural gas are reviewed and rejected as power options for the region.

  20. Renewable Energy Systems in the Power Electronics Curriculum

    DEFF Research Database (Denmark)

    Blaabjerg, Frede; Chen, Zhe; Teodorescu, Remus

    2005-01-01

    Power Electronics is still an emerging technology and its applications are increasing. The primary function is to convert electrical energy from one stage to another and it is used in many different applications. The power electronics curriculum is multidisciplinary covering fields like devices......, magnetics, electrical machines, power systems, analogue and digital control, materials, power converters, electronics, materials, thermal design and EMC. However, those fields may not be enough in order to give the students enough skills. It is also necessary to learn about systems and for the moment one...... of the most important area is renewable energy systems. This paper will discuss the basic courses for the power electronics curriculum. It will also discuss how to teach power electronic systems efficiently through a projectoriented and problem-based learning approach with Aalborg University in Denmark...

  1. Power system and market integration of renewable electricity

    Science.gov (United States)

    Erdmann, Georg

    2017-07-01

    This paper addresses problems of power generation markets that arise under high shares of intermittent generation. After discussing the economic fundamentals of wind and photovoltaic investments, the paper introduces the concept of the "Merit order effect of renewables". According to this concept electricity prices on wholesale power markets become smaller in periods during which large volumes of wind and photovoltaic generation is available and squeeze out relative expensive gas-fired power generation. The merit order effect of renewables has a couple of consequences. Among others it challenges the profitability of conventional power generation. If such generation capacities are still necessary, at least during a transitory period, a capacity mechanism may be put in place that generates an additional stream of income to the operators of conventional power generators. Another consequence of growing intermittent power generation is the need for concepts and technologies that deal with excess generation. Among these concepts are virtual and physical power storage capacities. In the last parts of the paper models are presented that are able to analyze these concepts from an economic point of view.

  2. Power electronics for renewable and distributed energy systems a sourcebook of topologies, control and integration

    CERN Document Server

    Chakraborty, Sudipta; Kramer, William E

    2013-01-01

    While most books approach power electronics and renewable energy as two separate subjects, Power Electronics for Renewable and Distributed Energy Systems takes an integrative approach; discussing power electronic converters topologies, controls and integration that are specific to the renewable and distributed energy system applications. An overview of power electronic technologies is followed by the introduction of various renewable and distributed energy resources that includes photovoltaics, wind, small hydroelectric, fuel cells, microturbines and variable speed generation. Energy storage s

  3. Energy Efficiency and Importance of Renewable Energy Sources in Latvia

    Science.gov (United States)

    Skapare, I.; Kreslins, A.

    2007-10-01

    The main goal of Latvian energy policy is to ensure safe and environmentally friendly long-term energy supply at cost-effective prices, contributing to enhance competitiveness, and to ensure safe energy transit. The Latvian Parliament approved an Energy Efficiency Strategy in 2000. Its objective is to decrease energy consumption per unit of GDP by 25% by 2010. Awareness raising, implementation of standards and economic incentives for self financing are the main instruments to increase energy efficiency, mentioned in the strategy. Latvia, as many other European Union member states, is dependent on the import of primary energy resources. The Latvian Renewable Energy strategy is still under development. The only recent study on RES was developed in the framework of a PHARE program in year 2000: "Renewable energy resource program", where three main objectives for a future RES strategy were proposed: 1. To increase the use of wood waste and low value wood and forest residues. 2. To improve efficiency of combustion technologies and to replace outdated plants. 3. To increase the use of renewables in Combined Heat and Power plants (CHP). Through the Renewable Energy and Energy Efficiency Partnership, partners will develop a set of new shared activities, and coordinate and strengthen existing efforts in this area.

  4. Financial mechanisms for renewable energy sources; Mecanismos financeiros para fontes de energia renovaveis

    Energy Technology Data Exchange (ETDEWEB)

    Moya Chaves, Francisco David [Universidade Estadual de Campinas (UNICAMP), SP (Brazil)

    2006-07-01

    This work presents three different financial mechanisms in the world as choices in the electricity generation investment from alternative energy sources. It shows a description of the following methods developed in the world: payment capacity, social costs of energy, and markets that trade renewable energies certificates. Finally, a recommendation about the best choice that could be implemented in Brazil is suggested. Given the importance in the use of the renewable energy of electric energy generation, most of the electric systems in the world have developed mechanisms to encourage the use of alternative energies. With the capacity payment the power plants that employ alternative sources, can receive extra payment as benefits for their initial investment. A possibility could be fixing taxes for the generation of electricity with fossil fuel that could finance the renewable energy sources. A renewable energy market dealing with trade able certificates, forces the electricity purchasers to have a percentage from alternative energies of the totally energy acquired. In this way the forced purchasing of energy from power plants which use energy certificates allows the expansion of these technologies. (author)

  5. Renewable (alternative) energies. Real future of the power supply including nuclear power. 2. enl. upd. ed.; Erneuerbare (alternative) Energien. Reale Zukunft der Energieversorgung, einschliesslich Kernenergie

    Energy Technology Data Exchange (ETDEWEB)

    Mueller, Karl-Heinz [Fachhochschule Suedwestfalen - Hochschule fuer Technik und Wirtschaft, Soest (Germany); Institut fuer Technologie- und Wissenstransfer an der Hochschulabteilung Soest (Germany); Giber, Janos [TU Budapest (Hungary). Institut fuer Atomphysik

    2010-07-01

    The scarceness of fossil fuels as well as the greenhouse effect affect the economic, technological, social and political development world-wide. The use of renewable energies for the future power supply seems to be a solution. Under this aspect, the book under consideration gives a compact general view of the potentials and availability of the fossil fuels and the renewable energies. Scenarios are discussed in detail under economic and ecological criteria. The limits of the individual sources of energy (fossil, renewable, nuclear sources of energy) are discussed based on comprehensible, reliable sources. By means of simple example calculations and an extensive table statements can be understood.

  6. Using Ground Source Heat Pumps for Renewable Energy

    Directory of Open Access Journals (Sweden)

    Xhevat BERISHA

    2017-04-01

    Full Text Available This paper provides background information on the current energy supply, energy demand, and energy sources in Kosovo. Moreover, it presents the country‟s current level of applying alternative energy sources. Additionally, this paper focuses on geothermal energy as a renewable energy resource with the potential to contribute to a sustainable use of resources to meet renewable energy and energy efficiency requirements of the European Union (EU, “EU 20 20 by 2020” policy. Hence, a careful analysis is included on how to approach the aforementioned targets through investments in geothermal energy through providing an energy consumption forecast and analysing geothermal energy projects in Europe and specifically in Kosovo. This paper carefully represents the potential usage of geothermal energy in Kosovo, renewable energy source targets, and it addresses the importance of laws, regulations, and reports regarding the utilization of this type of energy. Economic and environmental implications of investing in geothermal energy - geothermal heat pumps for the case of International Village are additionally analysed. Lastly, recommendations and conclusions, for future actions, are derived and addressed to relevant stakeholders, primarily policy-makers, and government representatives.

  7. Administrative procedures linked with power production facilities that use renewable energy sources. Report made in application of article 6 of directive 2001/77/CE from October 27, 2001; Les procedures administratives liees aux installations de production d'electricite d'origine renouvelable. Rapport fait en application de l'article 6 de la directive 2001/77/CE du 27/10/2001

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-10-01

    This report presents an evaluation of the legislative and regulatory framework relative to power generation facilities that use renewable energy sources. It presents also the actions that have been carried out to reduce the obstacles to the development of these facilities (access to the power distribution and transportation grid). (J.S.)

  8. The hillsides would allow to produce electric power from renewable source; Les flancs de montagne pourraient permettre de produire de l'electricite d'origine renouvelable

    Energy Technology Data Exchange (ETDEWEB)

    Laby, F

    2006-09-15

    A solar tower is a renewable energy plant, designed to channel the air warmed by the sun, in order to produce electric power by the use of turbines. It is composed of a giant greenhouse with a chimney in its center. The capacity of this system is proportional to the chimney high. That is the reason why french engineers proposed to use the hillsides to build chimneys of many kilometers high. The project and some technical informations are provided in this paper. (A.L.B.)

  9. New renewable source of energy from municipal solid waste plastics

    Energy Technology Data Exchange (ETDEWEB)

    Sarker, Moinuddin; Zaman, Ashiquz; Mamunor Rashid, Mohammad

    2010-09-15

    Renewable energy plays an important role in the supply of energy. When energy sources are used, the demand for fossil fuels is reduced. Emissions from the evaporation and combustion of these traditional fossil fuels contributing to a range of environmental and health problems, causing poor air quality, and emitting greenhouse gases that contribute to global warming. Alternative fuel created from domestic sources has been proposed as a solution to these problems and many alternative fuels are being developed based on solar, wind and biomass. Natural State Research has developed different alternative hydrocarbon fuel produced from abundant waste plastic materials.

  10. Electrochemical energy storage for renewable sources and grid balancing

    CERN Document Server

    Moseley, Patrick T

    2015-01-01

    Electricity from renewable sources of energy is plagued by fluctuations (due to variations in wind strength or the intensity of insolation) resulting in a lack of stability if the energy supplied from such sources is used in 'real time'. An important solution to this problem is to store the energy electrochemically (in a secondary battery or in hydrogen and its derivatives) and to make use of it in a controlled fashion at some time after it has been initially gathered and stored. Electrochemical battery storage systems are the major technologies for decentralized storage systems and hydrogen

  11. Switch: a planning tool for power systems with large shares of intermittent renewable energy.

    Science.gov (United States)

    Fripp, Matthias

    2012-06-05

    Wind and solar power are highly variable, so it is it unclear how large a role they can play in future power systems. This work introduces a new open-source electricity planning model--Switch--that identifies the least-cost strategy for using renewable and conventional generators and transmission in a large power system over a multidecade period. Switch includes an unprecedented amount of spatial and temporal detail, making it possible to address a new type of question about the optimal design and operation of power systems with large amounts of renewable power. A case study of California for 2012-2027 finds that there is no maximum possible penetration of wind and solar power--these resources could potentially be used to reduce emissions 90% or more below 1990 levels without reducing reliability or severely raising the cost of electricity. This work also finds that policies that encourage customers to shift electricity demand to times when renewable power is most abundant (e.g., well-timed charging of electric vehicles) could make it possible to achieve radical emission reductions at moderate costs.

  12. 48 CFR 217.175 - Multiyear contracts for electricity from renewable energy sources.

    Science.gov (United States)

    2010-10-01

    ... electricity from renewable energy sources. 217.175 Section 217.175 Federal Acquisition Regulations System... renewable energy sources. (a) The head of the contracting activity may enter into a contract for a period not to exceed 10 years for the purchase of electricity from sources of renewable energy, as that...

  13. Analysis The Potential Implementation And Use Of The Renewable Energy Sources In The Murmansk Region

    Science.gov (United States)

    Chekardovskiy, S. M.; Zakirzakov, A. G.; Gordievskaya, E. F.

    2017-01-01

    The paper presents the analysis of the geographical location of the Murmansk region and possibilities of using different renewable energy sources. Present the results of the analysis of using and practicality wind power to wind turbines to generate electricity. The paper presents of average annual consumption of electricity settlements in the Murmansk region, options for replacing the use of diesel fuel by wind energy and recommendations for possible areas of utilization of wind energy.

  14. Regensim – Matlab toolbox for renewable energy sources modelling and simulation

    Directory of Open Access Journals (Sweden)

    Cristian Dragoş Dumitru

    2011-12-01

    Full Text Available This paper deals with the implementation and development of a Matlab Simulink library named RegenSim designed for modeling, simulations and analysis of real hybrid solarwind-hydro systems connected to local grids. Blocks like wind generators, hydro generators, solar photovoltaic modules and accumulators are implemented. The main objective is the study of the hybrid power system behavior, which allows employing renewable and variable in time energy sources while providing a continuous supply.

  15. Renewable energy sources. Research activities of German universities. Erneuerbare Energiequellen. Aktivitaeten deutscher Hochschulen

    Energy Technology Data Exchange (ETDEWEB)

    Peuser, F.A.; Weiss, R. (comps.)

    1992-01-01

    An overview on research and development works in German colleges in the field of renewable energy sources is given. 1. Solar thermal utilization (heat) - 56 projects; 2. Heat pumps - 8 projects; 3. Storage technology - 10 projects; 4. Solar architecture - 17 projects; 5. Photovoltaics - 70 projects; 6. Wind power - 24 projects; 7. Biomass - 24 projects; 8. Further themes - 14 projects; altogether - 223 projects. For each of the projects a separate subject analysis has been carried out. (HW).

  16. The economic impacts of desert power. Socio-economic aspects of an EUMENA renewable energy transition

    Energy Technology Data Exchange (ETDEWEB)

    Blohmke, Julian; Sohm, Matthew; Zickfeld, Florian

    2013-06-15

    The countries of the Middle East and North Africa (MENA) are one of the world's largest potential growth markets for renewable energy generation. Countries throughout the region have recognized the great potential of their excellent wind and solar conditions, and ample empty space, and have ambitious plans to develop solar and wind energy. They are already making progress in realizing these renewables targets. They also increasingly recognize the great potential of renewable energy in tackling a range of challenges. At a time of high unemployment, particularly among youth, the growth of renewable energy provides an engine for creating new jobs and fostering new skill profiles among workers. Renewables can increase GDP and form the basis for a significant new source of trade revenues. As a source of energy, renewables reduce dependency on fossil fuels - whether as imports, to supply energy, or as exports. This report, Economic Impacts of Desert Power (EIDP), investigates how, and under what conditions, renewables in MENA can lead to socioeconomic benefits. EIDP shows, under various scenarios, how many jobs can be expected in three exemplary MENA countries, and how the expansion of renewables can lead to higher GDP growth rates across the region. EIDP pinpoints their economic impact across sectors and countries. At the same time, EIDP describes how these effects can be maximized through immediate and sustained policy support. The report also details how such support can be tailored to foster a self-sustaining market. In short, EIDP aims to contribute to a range of debates focused on how to maximize the benefits of green growth. EIDP illustrates the following points: - MENA can benefit economically from decarbonizing - even if the rest of the world does not pursue climate action. - Exporting excess electricity is an economic opportunity for MENA countries - several North African countries could create a major export industry with renewable electricity, which

  17. Examining the Small Renewable Energy Power (SREP) Program in Malaysia

    Energy Technology Data Exchange (ETDEWEB)

    Sovacool, Benjamin K., E-mail: bsovacool@nus.edu.sg [Lee Kuan Yew School of Public Policy, National University of Singapore, 469C Bukit Timah Road, Singapore 259772 (Singapore); Drupady, Ira Martina [Lee Kuan Yew School of Public Policy, National University of Singapore, 469C Bukit Timah Road, Singapore 259772 (Singapore)

    2011-11-15

    The Small Renewable Energy Power (SREP) Program was the premier policy mechanism implemented by the national government to promote small-scale renewable electricity in Malaysia from 2001 to 2010. However, it managed meet less than 3 percent of its original goal by 2005. This study investigates what happened. More specifically, using a qualitative semi-structured interview approach with data presented in a narrative format, it answers the following five questions: (1) What are the primary energy policy and security challenges facing Malaysia? (2) What were the drivers behind the SREP in Malaysia? (3) What were the major benefits arising from the SREP? (4) What were the significant challenges to implementation? (5) What lessons or insights does the SREP offer for the study of energy policy design and implementation more generally? We find that the SREP failed to achieve its targets due to capacity caps, a lengthy approval process, lack of monitoring, exclusion of stakeholders, and few (if any) pre-feasibility studies. Other factors explaining its poor performance include opposition from the national utility Tenaga Nasional Berhad and electricity tariffs unmatched with true production costs. - Highlights: > The Small Renewable Energy Power Program aimed to install 500 MW by 2005. > It installed only 12 MW by December 2005. > This study investigates why the SREP failed to achieve its targets.

  18. Bimode uninterruptible power supply compatibility in renewable hybrid energy systems

    Energy Technology Data Exchange (ETDEWEB)

    Bower, W. (Sandia National Labs., Albuquerque, NM (USA)); O' Sullivan, G. (Abacus Controls, Inc., Somerville, NJ (USA))

    1990-08-01

    Inverters installed in renewable hybrid energy systems are typically used in a stand-alone mode to supply ac power to loads from battery storage when the engine-generator is not being used. Similarities in topology and in the performance requirements of the standby uninterruptible power supply (UPS) system and the hybrid system suggest the UPS could be used in hybrid energy systems. Another alternative to inverters with add-on charging circuits or standby UPS hardware is the Bimode UPS. The bimode UPS uses common circuitry and power components for dc to ac inversion and battery charging. It also provides an automatic and nearly instantaneous ac power transfer function when the engine-generator is started or stopped. The measured operating and transfer characteristics of a bimode UPS in a utility system and in a hybrid system are presented. The applicability of the bimode UPS to hybrid systems and its compatibility in a PV/engine-generator hybrid system are given.

  19. SOURCES OF UNINTERRUPTED AND AUTONOMOUS POWER SUPPLY

    Directory of Open Access Journals (Sweden)

    Denisenko E. A.

    2016-01-01

    Full Text Available The article describes the main block diagrams of three types of uninterruptible power supply: backup; interactive; double conversion. The main functions are: the function backup or emergency source of electrical power; the function of protective devices (from an overload currents and short-circuit; improving the quality of the power supply voltage. Alsoб we have disclosed the features of the advantages and disadvantages of uninterruptible power supplies three groups: Off-Line / Stand-By / back-up UPS (passive - reserve; Line-Interactive (line interactive type; On-Line. The article discloses new approaches to structural and schematic-based uninterruptible power supply, including at use of renewable energy, so that the failure of one of the sources does not lead to exit from the operation of the entire of power supply system. As a rule, such systems are built on a modular principle. It is shown that now for remote users from external networks is advisable to apply a system autonomous power supply, representing the totality of sources and converters of electric power, ensuring uninterrupted power supply to consumers. We have presented a typical structure of autonomous systems and given an option of the block diagram of the system and are given explanations and principles of its work. Significantly improves performance reliability of autonomous systems using the modularity of its main functional units. In addition, to increase the efficiency of the system can be through the use in the construction of transformers with static converters rotating magnetic field. To improve the weight, which is important for the transport systems, it is necessary to use links with the intermediate high-frequency electric power conversion in static converters

  20. A Robust Synchronization to Enhance the Power Quality of Renewable Energy Systems

    DEFF Research Database (Denmark)

    Hadjidemetriou, Lenos; Kyriakides, Elias; Blaabjerg, Frede

    2015-01-01

    The increasing penetration of renewable energy sources (RESs) in the power grid requires high-quality power injection under various grid conditions. The synchronization method, usually a phase-locked loop (PLL) algorithm, is directly affecting the response of the grid-side converter of the RES....... This paper proposes a new PLL algorithm that uses an advanced decoupling network implemented in the stationary reference frame with limited requirements for processing time to enable a fast and accurate synchronization even under harmonic distorted voltage and low-voltage grid faults. The robust response...... of the proposed PLL is validated, and the effect of the proposed synchronization on the performance of the grid-connected renewable energy system is investigated. This investigation proves that the robust, accurate, and dynamic response of the new PLL can enhance the quality of the injected power from the RES...

  1. Social Attitudes towards Wind Farms and other Renewable Energy Sources in Poland

    Directory of Open Access Journals (Sweden)

    Bożena Mroczek

    2014-12-01

    Full Text Available Introduction. The development of the wind power industry brings benefits for humans and the natural environment through the reduction of pollution emitted into the atmosphere, the creation of new jobs, and the improvement of the energy security of the country. At the same time, however, it causes people’s anxiety about adverse effects of wind farms on the environment and human health. The purpose of the study was to analyze the social attitudes of Poles toward wind power and other renewable energy sources. Material and methods. The research was carried out using the street survey method throughout the whole of Poland It involved 1,169 respondents, including 680 (58.2% from urban and 489 (41.8% from rural areas; 354 (17.2% respondents lived at a distance of more than 3 km from wind farms. Results. The majority of those he surveyed support the development of the renewable energy source and wind industry, and can see the sense of investments in this sector. Every fifth respondent is prepared to pay more for renewable energy, bearing in mind that it reduces the emission of CO2 into the atmosphere. The use of wind power contributes to: the protection of human health, the purity of the natural environment, the creation of new jobs, technological progress of Poland, the reduction of the air pollution, the improvement of energy security of the country, the prosperity of the region and its dwellers. Conclusions. Poles who do not live near renewable energy investments support the development of this sector. Nevertheless, the NIMBY syndrome cannot be excluded. Therefore, it is necessary to conduct research on two groups – a group of people living near renewable energy investments and residents of places where such investments are not planned. Polish people also support for pro-ecological actions and demonstrate positive attitudes toward wind power and other renewable energy sources. They can see benefits for humans and the environment resulting from

  2. Performance Analyses of Renewable and Fuel Power Supply Systems for Different Base Station Sites

    Directory of Open Access Journals (Sweden)

    Josip Lorincz

    2014-11-01

    Full Text Available Base station sites (BSSs powered with renewable energy sources have gained the attention of cellular operators during the last few years. This is because such “green” BSSs impose significant reductions in the operational expenditures (OPEX of telecom operators due to the possibility of on-site renewable energy harvesting. In this paper, the green BSSs power supply system parameters detected through remote and centralized real time sensing are presented. An implemented sensing system based on a wireless sensor network enables reliable collection and post-processing analyses of many parameters, such as: total charging/discharging current of power supply system, battery voltage and temperature, wind speed, etc. As an example, yearly sensing results for three different BSS configurations powered by solar and/or wind energy are discussed in terms of renewable energy supply (RES system performance. In the case of powering those BSS with standalone systems based on a fuel generator, the fuel consumption models expressing interdependence among the generator load and fuel consumption are proposed. This has allowed energy-efficiency comparison of the fuel powered and RES systems, which is presented in terms of the OPEX and carbon dioxide (CO2 reductions. Additionally, approaches based on different BSS air-conditioning systems and the on/off regulation of a daily fuel generator activity are proposed and validated in terms of energy and capital expenditure (CAPEX savings.

  3. High average power supercontinuum sources

    Indian Academy of Sciences (India)

    J C Travers

    2010-11-01

    The physical mechanisms and basic experimental techniques for the creation of high average spectral power supercontinuum sources is briefly reviewed. We focus on the use of high-power ytterbium-doped fibre lasers as pump sources, and the use of highly nonlinear photonic crystal fibres as the nonlinear medium. The most common experimental arrangements are described, including both continuous wave fibre laser systems with over 100 W pump power, and picosecond mode-locked, master oscillator power fibre amplifier systems, with over 10 kW peak pump power. These systems can produce broadband supercontinua with over 50 and 1 mW/nm average spectral power, respectively. Techniques for numerical modelling of the supercontinuum sources are presented and used to illustrate some supercontinuum dynamics. Some recent experimental results are presented.

  4. The Examining of Prospective Teachers? Views about Renewable and Non-Renewable Energy Sources: A Case Study of Turkey

    Science.gov (United States)

    Hasiloglu, Mehmet Akif

    2014-01-01

    The aim of this study is to determine prospective teachers? views about renewable and non-renewable energy sources. To collect data, a questionnaire with 5 open-ended questions was conveyed to 463 prospective teachers selected from Agri Ibrahim Cecen University. The results showed that almost three fourths of the prospective teachers tend to…

  5. The Examining of Prospective Teachers? Views about Renewable and Non-Renewable Energy Sources: A Case Study of Turkey

    Science.gov (United States)

    Hasiloglu, Mehmet Akif

    2014-01-01

    The aim of this study is to determine prospective teachers? views about renewable and non-renewable energy sources. To collect data, a questionnaire with 5 open-ended questions was conveyed to 463 prospective teachers selected from Agri Ibrahim Cecen University. The results showed that almost three fourths of the prospective teachers tend to…

  6. Renewable energy sources, the internet of things and the third industrial revolution: Smart grid and contemporary information and communication technologies

    Science.gov (United States)

    Kitsios, Aristidis; Bousakas, Konstantinos; Salame, Takla; Bogno, Bachirou; Papageorgas, Panagiotis; Vokas, Georgios A.; Mauffay, Fabrice; Petit, Pierre; Aillerie, Michel; Charles, Jean-Pierre

    2017-02-01

    In this paper, the energy efficiency of a contemporary Smart Grid that is based on Distributed Renewable Energy Sources (DRES) is examined under the scope of the communication systems utilized between the energy loads and the energy sources. What is evident is that the Internet of Things (IoT) technologies that are based on the existing Web infrastructure can be heavily introduced in this direction especially when combined with long range low bandwidth networking technologies, power line communication technologies and optimization methodologies for renewable energy generation. The renewable energy generation optimization will be based on devices embedded in the PV panels and the wind power generators, which will rely on bidirectional communications with local gateways and remote control stations for achieving energy efficiency. Smart meters and DRES combined with IoT communications will be the enabling technologies for the ultimate fusion of Internet technology and renewable energy generation realizing the Energy Internet.

  7. A Study on Renewable Power Pricing Mechanism and Price Incentive Policies in China

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    The basic framework of price policies for promoting renewable power development in China is introduced.The background,concept and implementation of price policies,focused on wind power,biomass power and solar power,are summarized in the article.The experiences and lessons of implementation of these price policies are analyzed.It is concluded that reasonable price policy is quite effective for promoting renewable power development.According to the requirement of China's renewable power development,the suggestions for improving renewable power pricing mechanism and price incentive policies are proposed.

  8. Other RF power sources

    Energy Technology Data Exchange (ETDEWEB)

    Kurkin, G.Ya. [Budker Inst. of Nuclear Physics, Novosibirsk (Russian Federation)

    1999-09-01

    The main subjects discussed in this paper are as follows. Triode tube; main characteristics of the equivalent schematic of the amplifying stage. Requirements for operation of a triode stage loaded with an accelerating cavity. Influence of parameters of the output stage and transmission line length on the output impedance of RF system for the beam. Typical design of the power output stage. Magnetron, travelling-wave tube, principles of operation, main parameters. Magnetron loaded with a microtron cavity, methods of coupling, requirements for stable operation. Magnicon - BHF generator with a circular deflection of the electron beam, principle of operation, results of development. (author)

  9. Hybrid power source

    Science.gov (United States)

    Singh, Harmohan N.

    2012-06-05

    A hybrid power system is comprised of a high energy density element such as a fuel-cell and high power density elements such as a supercapacitor banks. A DC/DC converter electrically connected to the fuel cell and converting the energy level of the energy supplied by the fuel cell. A first switch is electrically connected to the DC/DC converter. First and second supercapacitors are electrically connected to the first switch and a second switch. A controller is connected to the first switch and the second switch, monitoring charge levels of the supercapacitors and controls the switching in response to the charge levels. A load is electrically connected to the second switch. The first switch connects the DC/DC converter to the first supercapacitor when the second switch connects the second supercapacitor to the load. The first switch connects the DC/DC converter to the second supercapacitor when the second switch connects the first supercapacitor to the load.

  10. Microalgae as a Renewable Source of Energy: A Niche Opportunity

    Directory of Open Access Journals (Sweden)

    Simon Jegan Porphy Jegathese

    2014-01-01

    Full Text Available Algae are believed to be a good source of renewable energy because of its rapid growth rate and its ability to be cultivated in waste water or waste land. Several companies and government agencies are making efforts to reduce capital cost and operating costs and make algae fuel production commercially viable. Algae are the fastest growing plant and theoretically have the potential to produce more oil or biomass per acre when compared to other crops and plants. However, the energy efficiency ratio and carbon and water footprint for algal based biofuels still need to be evaluated in order to fully understand the environmental impact of algal derived biofuels.

  11. Fiscal Policy for Renewable Energy Sources and Its Economic Impact

    OpenAIRE

    Rita Helbra Tenrini; Sidiq Suryo Nugroho

    2014-01-01

    Indonesia is the largest producers of palm oil. Along with the increasing demand for renewable energy source, palm oil will turn to be a very important commodity in the future. The palm oil industry will gain more value-added if they export the commodities in processed materials rather than raw materials. On the other hands palm oil industry more likely to export raw material, because there’s no incentives for them to export processed materials. Therefore, to give an incentive to palm oil ind...

  12. A Novel Method of Utilizing Hybrid Generator as Renewable Source

    Directory of Open Access Journals (Sweden)

    K.Fathima

    2015-12-01

    Full Text Available Energy production and consumption in the future may depend on renewable energy sources and also depends on the efficiency of utilizing it. Here, a hybrid system, a combination of solar cells and thermoelectric generators is controlled by open circuit voltage method which is normally used for linear electrical characteristics. The proposed system is supported by theoretical analysis and simulation. Lead acid battery is used to accumulate the harvested energy. Cuk converters are used here to improve the efficiency and helps in reduction of noises. Hybrid generators are found to be efficient and more stable.

  13. Control and power electronics technology in renewable energy

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    As the cut-in point of research on control and power electronics technology used in renewable energy, this paper does not aim to analyze particular theories or tech-nologies in this field, but, instead, is to go back to the fountainhead of the issue to illustrate the essential concepts in this field, which are usually neglected and may become bottle-neck of the research. Research experiences have shown that con-fusion and trouble may be created if researchers do not understand these essential concepts well.

  14. Power system and market integration of renewable electricity

    Directory of Open Access Journals (Sweden)

    Erdmann Georg

    2017-01-01

    Full Text Available This paper addresses problems of power generation markets that arise under high shares of intermittent generation. After discussing the economic fundamentals of wind and photovoltaic investments, the paper introduces the concept of the “Merit order effect of renewables”. According to this concept electricity prices on wholesale power markets become smaller in periods during which large volumes of wind and photovoltaic generation is available and squeeze out relative expensive gas-fired power generation. The merit order effect of renewables has a couple of consequences. Among others it challenges the profitability of conventional power generation. If such generation capacities are still necessary, at least during a transitory period, a capacity mechanism may be put in place that generates an additional stream of income to the operators of conventional power generators. Another consequence of growing intermittent power generation is the need for concepts and technologies that deal with excess generation. Among these concepts are virtual and physical power storage capacities. In the last parts of the paper models are presented that are able to analyze these concepts from an economic point of view.

  15. Materials for future power sources

    OpenAIRE

    Ludvigsson, Mikael

    2000-01-01

    Proton exchange membrane fuel cells and lithium polymer batteries are important as future power sources in electronic devices, vehicles and stationary applications. The development of these power sources involves finding and characterising materials that are well suited r the application. The materials investigated in this thesis are the perfluorosulphonic ionomer NafionTM (DuPont) and metal oxides incorporated into the membrane form of this material. The ionomer is used as polymer electrolyt...

  16. Renewable energy sources and nuclear installations; Erneuerbare Energien und neue Nuklearanlagen

    Energy Technology Data Exchange (ETDEWEB)

    Hirschberg, S.; Bauer, Ch.; Burgherr, P.; Stucki, S.; Vogel, F.; Biollaz, S.; Schulz, T.; Durisch, W.; Hardegger, P.; Foskolos, K.; Meier, A.; Schenler, W.

    2005-02-15

    This comprehensive work report for the Swiss Federal Office of Energy (SFOE) made by the Paul Scherrer Institute PSI takes a look at work done in connection with the updating of the office's Energy Perspectives. In particular, the topic of electricity is reviewed in the light of pending important decisions in the area of nuclear energy and the newer renewable sources of energy. The report makes an attempt to estimate the effect on Swiss power production that the new renewables and new nuclear installations could have in the next 30-40 years and to what costs this could be done and which obstacles would have to overcome. The renewable energy sources include small hydro, wind, photovoltaics, solar thermal power plants, biogas, geothermal energy, wave-power and solar chemistry. The methods used include literature study and contacts with internal PSI experts on the various areas involved. The most important system characteristics were noted and learning curves for the various technologies were taken into account. Ecological and social factors were also considered

  17. A practical algorithm for distribution state estimation including renewable energy sources

    Energy Technology Data Exchange (ETDEWEB)

    Niknam, Taher [Electronic and Electrical Department, Shiraz University of Technology, Modares Blvd., P.O. 71555-313, Shiraz (Iran); Firouzi, Bahman Bahmani [Islamic Azad University Marvdasht Branch, Marvdasht (Iran)

    2009-11-15

    Renewable energy is energy that is in continuous supply over time. These kinds of energy sources are divided into five principal renewable sources of energy: the sun, the wind, flowing water, biomass and heat from within the earth. According to some studies carried out by the research institutes, about 25% of the new generation will be generated by Renewable Energy Sources (RESs) in the near future. Therefore, it is necessary to study the impact of RESs on the power systems, especially on the distribution networks. This paper presents a practical Distribution State Estimation (DSE) including RESs and some practical consideration. The proposed algorithm is based on the combination of Nelder-Mead simplex search and Particle Swarm Optimization (PSO) algorithms, called PSO-NM. The proposed algorithm can estimate load and RES output values by Weighted Least-Square (WLS) approach. Some practical considerations are var compensators, Voltage Regulators (VRs), Under Load Tap Changer (ULTC) transformer modeling, which usually have nonlinear and discrete characteristics, and unbalanced three-phase power flow equations. The comparison results with other evolutionary optimization algorithms such as original PSO, Honey Bee Mating Optimization (HBMO), Neural Networks (NNs), Ant Colony Optimization (ACO), and Genetic Algorithm (GA) for a test system demonstrate that PSO-NM is extremely effective and efficient for the DSE problems. (author)

  18. Renewable energy made easy free energy from solar, wind, hydropower, and other alternative energy sources

    CERN Document Server

    Craddock, David

    2008-01-01

    Studies have shown that the average North American family will spend more than a quarter of a million dollars on energy in a lifetime. What many other countries, including Germany, Spain, France, Denmark, China, Brazil, and even Iceland, have realized is that there is a better way to power our homes, businesses, and cars by using renewable energy sources. Recently, the United States has begun to understand the importance of reducing its reliance on coal, natural gas, nuclear power, and hydropower plants, which comprise the majority of the nation's electricity, due to increasing oil prices.

  19. Evaluation of Energy Use in Public Housing in Lagos, Nigeria: Prospects for Renewable Energy Sources

    National Research Council Canada - National Science Library

    Isidore Chukwunweike Ezema; Abiodun O Olotuah; Olabosipo I Fagbenle

    2016-01-01

      Even though domestic energy can be from either renewable or non-renewable sources, the former is preferred because of its role in reducing both the operational energy intensity and carbon footprint...

  20. CAS institute, US national lab ink MOU on renewable energy sources

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    @@ Amemorandum of understanding (MOU) for cooperation on renewable energy sources was signed between the CAS Institute of Electrical Engineering (IEE) and the US National Renewable Energy Laboratory (NREL) on 11 November,2008, in Beijing.

  1. The Cost-Optimal Distribution of Wind and Solar Generation Facilities in a Simplified Highly Renewable European Power System

    Science.gov (United States)

    Kies, Alexander; von Bremen, Lüder; Schyska, Bruno; Chattopadhyay, Kabitri; Lorenz, Elke; Heinemann, Detlev

    2016-04-01

    The transition of the European power system from fossil generation towards renewable sources is driven by different reasons like decarbonisation and sustainability. Renewable power sources like wind and solar have, due to their weather dependency, fluctuating feed-in profiles, which make their system integration a difficult task. To overcome this issue, several solutions have been investigated in the past like the optimal mix of wind and PV [1], the extension of the transmission grid or storages [2]. In this work, the optimal distribution of wind turbines and solar modules in Europe is investigated. For this purpose, feed-in data with an hourly temporal resolution and a spatial resolution of 7 km covering Europe for the renewable sources wind, photovoltaics and hydro was used. Together with historical load data and a transmission model , a simplified pan-European power power system was simulated. Under cost assumptions of [3] the levelized cost of electricity (LCOE) for this simplified system consisting of generation, consumption, transmission and backup units is calculated. With respect to the LCOE, the optimal distribution of generation facilities in Europe is derived. It is shown, that by optimal placement of renewable generation facilities the LCOE can be reduced by more than 10% compared to a meta study scenario [4] and a self-sufficient scenario (every country produces on average as much from renewable sources as it consumes). This is mainly caused by a shift of generation facilities towards highly suitable locations, reduced backup and increased transmission need. The results of the optimization will be shown and implications for the extension of renewable shares in the European power mix will be discussed. The work is part of the RESTORE 2050 project (Wuppertal Institute, Next Energy, University of Oldenburg), that is financed by the Federal Ministry of Education and Research (BMBF, Fkz. 03SFF0439A). [1] Kies, A. et al.: Kies, Alexander, et al

  2. Design of a Sustainable and Efficient Transportation Station (SETS Based on Renewable Sources and Efficient Electric Drives

    Directory of Open Access Journals (Sweden)

    Myungchin Kim

    2016-12-01

    Full Text Available The need for reduction in power consumption for public facilities has increased after the occurrences of multiple blackout events. In an effort to enable the development of green and smart social infrastructure, this paper introduces a design for a sustainable and efficient transportation system (SETS. For this design, renewable power sources and efficient electric drives are considered to be crucial technologies. Considering the subway station as an illustrative example, a power system design that uses wind and solar energy as major power sources is studied. The adjustable speed electric drive system that uses synchronous reluctance machines for ventilation systems contributes to increasing the overall power consumption efficiency. The effectiveness of the proposed SETS system is verified through a set of various field measurement data and simulation results. While the verification results demonstrate that operation of SETS is enabled by effective integration of renewable sources and efficient ventilation systems, future research directions have also been identified.

  3. Renewable energy for professional applications: a guide to implementing off-grid power supplies in the UK

    Energy Technology Data Exchange (ETDEWEB)

    Paish, O.; Oldach, R.

    2002-09-01

    These guidelines are intended to help those considering renewable energy systems to supply power to off-grid applications without access to the UK mains electricity network. The guidelines consider: examples of renewable energy systems used applications with a low power demand in the UK; renewable energy technologies relevant to off-grid applications (solar photovoltaics, wind generators, micro-hydro turbines and hybrid systems); nine steps for project implementation; defining and optimising the load application; estimating energy resources when using solar energy, wind power and hydro power; general rules of thumb when choosing a power source; system components such as batteries, inverters, support structure and civil works; basic system sizing calculations; developing a specification and contacting suppliers; checking equipment, installation and commissioning; legal and other non-technical issues; operating issues such as maintenance and safety; and selected case studies from the UK.

  4. Energy efficiency and renewable energy sources in Nordic homes

    Energy Technology Data Exchange (ETDEWEB)

    Hyysalo, S.; Rinkinen, J. [Aalto Univ. School of Economics, Helsinki (Finland). Dept. of Management and International Business; Heiskanen, E. [National Consumer Research Centre, Helsinki (Finland)

    2011-07-01

    The role of citizens as innovators, adaptors of existing technologies and diffusers of new climate-relevant innovations has been studied extensively in recent years. Since the late 1970s, sociological and demographic research on residential energy use has consistently found great variations in energy use among similar households. It has been suggested that these variations constitute a source of innovative low-carbon practices. Yet, while there are many generic technologies available for end-use efficiency and renewables, their slow rate of diffusion suggests that they are not as such applicable to local conditions. Citizens have a key role in their adoption and adaptation to local conditions, as well in their diffusion to other users. Against this backdrop, the track 4 of NCF called for poster presentations of innovative new products, modifications of existing products, news ways of make use of existing technologies as well as such living practices that reduce energy use or enable the utilization of renewable energy sources in domestic settings in the Nordic countries. (orig.)

  5. THE NEED FOR THE USE OF RENEWABLE ENERGY SOURCES

    Directory of Open Access Journals (Sweden)

    Grigorash O. V.

    2016-04-01

    Full Text Available The article reveals main reasons for developing tendencies to the using of new types of energy, which are limited supply of traditional fuels and environmental problems associated with its processing. It is shown that new forms of energy plays an important role in the energy supply of many countries of the world, and in the future they can become the main sources of energy to meet the growing needs of the global economy. We reveal main reasons of the increasing interest in renewable energy, and we show the obvious prospects of their use, due to two factors. First, according to experts, the global reserves of traditional fuels are limited, and secondly, this was evidenced by the investments of leading countries in this promising industry. The article lists reasons for the need for the use of renewable energy sources in Russia. Increased consumption of natural resources has become a real threat to the security of the life of human society. The basis of solving modern social and environmental problems is a transition to a regulated process of safe use of natural energy potential to meet the vital needs of people not only in the coming decades, but in the long run. It is concluded, that the determining condition for the development of the human civilization at present and in the future would be the level of natural resources which ensures the needs of the population without making harm to the environment

  6. Dynamic energy management employing renewable energy sources in IP over DWDM networks

    DEFF Research Database (Denmark)

    Chen, Xin; Phillips, Chris; Wang, Jiayuan

    2013-01-01

    The continued growth of energy consumption has been one of the main constraints for the development of the Internet. The increasing emissions of greenhouse gases associated with electricity generation also raise public concern for the environment. In this paper, we propose a dynamic energy...... management framework employing renewable energy sources in IP over DWDM core networks. The main concept is to combine infrastructure sleeping and virtual router migration to improve the network energy efficiency. By using the energy source information provided by the smart grid, the nodes that are powered...

  7. Micro and macroalgal biomass: a renewable source for bioethanol.

    Science.gov (United States)

    John, Rojan P; Anisha, G S; Nampoothiri, K Madhavan; Pandey, Ashok

    2011-01-01

    Population outburst together with increased motorization has led to an overwhelming increase in the demand for fuel. In the milieu of economical and environmental concern, algae capable of accumulating high starch/cellulose can serve as an excellent alternative to food crops for bioethanol production, a green fuel for sustainable future. Certain species of algae can produce ethanol during dark-anaerobic fermentation and thus serve as a direct source for ethanol production. Of late, oleaginous microalgae generate high starch/cellulose biomass waste after oil extraction, which can be hydrolyzed to generate sugary syrup to be used as substrate for ethanol production. Macroalgae are also harnessed as renewable source of biomass intended for ethanol production. Currently there are very few studies on this issue, and intense research is required in future in this area for efficient utilization of algal biomass and their industrial wastes to produce environmentally friendly fuel bioethanol. Copyright © 2010 Elsevier Ltd. All rights reserved.

  8. Research on bioorganic fuels as power sources

    Energy Technology Data Exchange (ETDEWEB)

    Lampinen, Markku J.; Spets, Jukka-Pekka [Aalto University, Department of Energy Technology-TKK, Applied Thermodynamics, PO Box 4400, FI-02201 TKK (Finland); Kiros, Yohannes [Royal Institute of Technology-KTH, Department of Chemical Engineering and Technology, S100-44 Stockholm (Sweden); Anttila, Tomi [Oy Hydrocell Ltd, Minkkikatu 1-3, 04430 Jaervenpaeae (Finland)

    2010-11-15

    This paper deals with the kind of the bioorganic fuel cells that are equipped with or without ion exchange membranes. The bioorganic materials of interest are alcohols (methanol, ethanol) and glucose, which are obtained from renewable energy sources such as biomass. The operation temperatures of the direct fuel cells cover from room temperature up to 150 C. The direct bioorganic fuel cells belong to the subject area of 'Advanced fuel cells' of the Working group 4 in the EU COST Action 543 among the collaborating Universities and Institutes. Bioorganic fuel cells are suitable for application in small portable power sources, such as backups, battery chargers and in electronic devices. A number of current and earlier works are summarised and advances are highlighted in this area with special emphasis on glucose as a fuel. (author)

  9. Adapting AC Lines to DC Grids for Large-Scale Renewable Power Transmission

    Directory of Open Access Journals (Sweden)

    D. Marene Larruskain

    2014-10-01

    Full Text Available All over the world, governments of different countries are nowadays promoting the use of clean energies in order to achieve sustainable energy systems. In this scenario, since the installed capacity is continuously increasing, renewable sources can play an important role. Notwithstanding that, some important problems may appear when connecting these sources to the grid, being the overload of distribution lines one of the most relevant. In fact, renewable generation is usually connected to the nearest AC grid, although this HV system may not have been designed considering distributed generation. In the particular case of large wind farms, the electrical grid has to transmit all the power generated by wind energy and, as a consequence, the AC system may get overloaded. It is therefore necessary to determine the impact of wind power transmission so that appropriate measures can be taken. Not only are these measures influenced by the amount of power transmitted, but also by the quality of the transmitted power, due to the output voltage fluctuation caused by the highly variable nature of wind. When designing a power grid, although AC systems are usually the most economical solution because of its highly proven technology, HVDC may arise in some cases (e.g. offshore wind farms as an interesting alternative, offering some added values such as lower losses and better controllability. This way, HVDC technology can solve most of the aforementioned problems and has a good potential for future use. Additionally, the fast development of power electronics based on new and powerful semiconductor devices allow the spread of innovative technologies, such as VSC-HVDC, which can be applied to create DC grids. This paper focuses on the main aspects involved in adapting the existing overhead AC lines to DC grids, with the objective of improving the transmission of distributed renewable energy to the centers of consumption.

  10. Energy Production System Management - Renewable energy power supply integration with Building Automation System

    Energy Technology Data Exchange (ETDEWEB)

    Figueiredo, Joao [Centre of Mechatronics Engineering - CEM/Institut of Mechanical Engineering - IDMEC, University of Evora, R. Romao Ramalho, 59, 7000-671 Evora (Portugal); Martins, Joao [Centre of Technology and Systems/Faculdade de Ciencias e Tecnologia, Universidade Nova Lisboa, 1049-001 Lisboa (Portugal)

    2010-06-15

    Intelligent buildings, historically and technologically, refers to the integration of four distinctive systems: Building Automation Systems (BAS), Telecommunication Systems, Office Automation Systems and Computer Building Management Systems. The increasing sophisticated BAS has become the ''heart and soul'' of modern intelligent buildings. Integrating energy supply and demand elements - often known as Demand-Side Management (DSM) - has became an important energy efficiency policy concept. Nowadays, European countries have diversified their power supplies, reducing the dependence on OPEC, and developing a broader mix of energy sources maximizing the use of renewable energy domestic sources. In this way it makes sense to include a fifth system into the intelligent building group: Energy Production System Management (EPSM). This paper presents a Building Automation System where the Demand-Side Management is fully integrated with the building's Energy Production System, which incorporates a complete set of renewable energy production and storage systems. (author)

  11. Smoothing effect for spatially distributed renewable resources and its impact on power grid robustness.

    Science.gov (United States)

    Nagata, Motoki; Hirata, Yoshito; Fujiwara, Naoya; Tanaka, Gouhei; Suzuki, Hideyuki; Aihara, Kazuyuki

    2017-03-01

    In this paper, we show that spatial correlation of renewable energy outputs greatly influences the robustness of the power grids against large fluctuations of the effective power. First, we evaluate the spatial correlation among renewable energy outputs. We find that the spatial correlation of renewable energy outputs depends on the locations, while the influence of the spatial correlation of renewable energy outputs on power grids is not well known. Thus, second, by employing the topology of the power grid in eastern Japan, we analyze the robustness of the power grid with spatial correlation of renewable energy outputs. The analysis is performed by using a realistic differential-algebraic equations model. The results show that the spatial correlation of the energy resources strongly degrades the robustness of the power grid. Our results suggest that we should consider the spatial correlation of the renewable energy outputs when estimating the stability of power grids.

  12. Renewable energy sources (RES: alternative possibilities, which could be implemented in Poland

    Directory of Open Access Journals (Sweden)

    Wiktor-Sułkowska Anna

    2016-01-01

    Full Text Available The Kyoto Protocol and the EU’s Renewable Energy Directive [1] are the World and the EU’s legal regulations, which put pressure on most of the countries to extensive use of renewable energy sources (RES, in exchange for a reduction of energy from conventional sources. The main goal of the legal regulations is to reduce greenhouse gas emission. In European Union, from 1990 till 2014, share of the renewable energy sources has increased about 173% [2]. The data show that RES share in energy mix is increasing, and still has to increase. Therefore, all European’s countries are obligated to build new RES installations and to improve the efficiency of existing installations. That is the reason of that paper. In this article, on the base of own field research carried out in Germany and in Poland, author presents two alternative methods of energy obtaining, in which former mining excavations are used. In first method the excavations are adapted as the elements of the hydroelectric power stations and in second method they are used as a source of geothermal energy. In the end of the paper, author presents the proposals for the implementation of similar solutions in Poland.

  13. Renewable energy powered membrane technology. 1. Development and characterization of a photovoltaic hybrid membrane system.

    Science.gov (United States)

    Schäfer, A I; Broeckmann, A; Richards, B S

    2007-02-01

    In isolated communities where potable water sources as well as energy grids are limited or nonexistent, treating brackish groundwater aquifers with small-scale desalination systems can be a viable alternative to existing water infrastructures. Given the unavailability of power in many such situations, renewable energy is an obvious solution to power such systems. However, renewable energy is an intermittent power supply and with regards to the performance of intermittently operated desalination systems, only very limited experience exists, both with regards to efficiency as well as water quality. In this paper, this lack of knowledge is addressed by evaluating a system operated with varying parameters (pressure and flow) with constant power as a step toward defining a safe operating window, and they provide a basis for interpreting future data obtained with a renewable energy source. Field trials were performed on a brackish (5300 mg/L TDS; 8290 microS/cm) bore in Central Australia with a photovoltaic-powered membrane filtration (PV-membrane) system. Four nanofiltration and reverse osmosis membranes (BW30, ESPA4, NF90, TFC-S) and a number of operation parameter combinations (transmembrane pressure, feed flow, TFC-S) and operating parameters transmembrane pressure and feed flow were investigated to find the best operating conditions for maximum drinking water production and minimum specific energy consumption (SEC). The ESPA4 membrane performed best for this brackish source, producing 250 L/h of excellent drinking water (257 mg/L TDS; 400 microS/ cm) at an SEC of 1.2 kWh/m3. The issue of brine disposal or reuse is also discussed and the article compares the salinity of the produced brine with livestock water. Since the feedwater is disinfected physically using ultrafiltration (UF), the brine is free from bacteria and most viruses and hence can be seen more as a reusable product stream than a waste stream with a disposal problem.

  14. External Benefit Evaluation of Renewable Energy Power in China for Sustainability

    Directory of Open Access Journals (Sweden)

    Huiru Zhao

    2015-04-01

    Full Text Available China’s renewable energy power has developed rapidly in recent years. Evaluating the external benefits of renewable energy power can provide a reference for the Chinese government to set diverse development goals and to implement differentiated supporting policies for different renewable energy power types, which can promote their sustainable development. In this paper, a hybrid MCDM method was applied to evaluate the external benefits of China’s renewable energy power. Firstly, the impacts of renewable energy power accessing the power grid for multiple stakeholders in the electric power system were analyzed. Secondly, the external benefit evaluation index system for renewable energy power was built from the economic, social and environmental factors, based on the concept of sustainability. Then, the basic theory of the hybrid MCDM method employed in this paper was introduced in two parts: the superiority linguistic ratings and entropy weighting method for index weight determination and the fuzzy grey relation analysis for ranking alternatives. Finally, the external benefits of wind power, solar PV power and biomass power were evaluated. Taking a regional electric power system as an example, the results show that PV power has the greatest external benefit, followed by wind power and biomass power. Therefore, more policies supporting PV power should be put in place to promote the harmonious and sustainable development of the whole renewable energy power industry.

  15. Comprehensive Evaluation of Coordination Development for Regional Power Grid and Renewable Energy Power Supply Based on Improved Matter Element Extension and TOPSIS Method for Sustainability

    Directory of Open Access Journals (Sweden)

    Xiaomin Xu

    2016-02-01

    Full Text Available In the background of exhaustion of the traditional fossil energy sources, developing renewable energy has become a strategic choice for China to achieve energy sustainable utilization and energy security. The coordination between renewable energy generation and the traditional power grid is a problem that needs to be solved in the development of the power grid. The three sectors of power generation, transmission, distribution, and scheduling are considered comprehensively in this paper and an evaluation index system for the development of renewable energy and traditional power grid is designed. The traditional method of Technique for Order Preference by Similarity to Ideal Solution (TOPSIS) is improved using the idea of matter element extension, and mathematical model of comprehensive evaluation is constructed. Combined with the development index data of a regional power grid and renewable energy sources in Ningxia province, this paper applied the evaluation model to empirical research. The results show that the model meets the real situation of development of the regional power grid and renewable energy generation and has certain reference and promotion significance.

  16. Impacts of Renewable Energy Quota System on China's Future Power Sector

    OpenAIRE

    Xiong, Weiming; Zhang, Da; Mischke, Peggy; Zhang, Xiliang

    2014-01-01

    As the biggest carbon emitting sector which produces 44% of current national carbon emission in China, the coal-dominated power sector has a tremendous potential for CO2 mitigation in the next two decades. Renewable energy quota system is currently discussed as a potential future policy instrument for the power sector, which requires certain fraction of renewable energy in total power generation for each province and grid zone. The quantitative studies on renewable energy quota for China are ...

  17. Power sources in endoscopic surgery.

    Science.gov (United States)

    Sutton, C

    1995-08-01

    The power sources used in endoscopic surgery are varied and numerous, and will continue to improve as technology progresses. Early attempts at operative laparoscopy were crude, limited by the available instrumentation, and tended to be frustrating: scissors that had to be frequently sharpened and endocoagulators that took a seemingly interminable time to achieve their tissue effect. New developements in ultrasonic energy and different wavelengths of laser energy are used alongside increasingly sophisticated electrosurgical tools, employing both monopolar and bipolar systems, and innovative delivery systems such as the argon beam coagulator and the Helica Thermal Coagulator. All of these systems have their advocates and their detractors, but in the end the choice of power source is determined by the type of equipment that the operator feels most comfortable with. The surgeon must have a detailed knowledge of the physical concepts required to generate the power source, and be able to understand the complications that can be created by the energy, how to avoid them, how and to deal with them if they occur. Although there are subtle differences in the reaction of the different energy sources with human tissue, the clinical outcome appears to be much the same, and depends more on the skill of the individual surgeon than the power source employed.

  18. 78 FR 37324 - Preparation of Environmental Reports for Nuclear Power Plant License Renewal Applications

    Science.gov (United States)

    2013-06-20

    ... COMMISSION 10 CFR Parts 51 and 54 RIN 3150-AI42 Preparation of Environmental Reports for Nuclear Power Plant..., Supplement 1 (RG 4.2S1), ``Preparation of Environmental Reports for Nuclear Power Plant License Renewal... reports that are submitted with the application for the renewal of a nuclear power plant operating...

  19. 78 FR 46255 - Revisions to Environmental Review for Renewal of Nuclear Power Plant Operating Licenses; Correction

    Science.gov (United States)

    2013-07-31

    ... COMMISSION 10 CFR Part 51 RIN 3150-AI42 Revisions to Environmental Review for Renewal of Nuclear Power Plant... environmental effect of renewing the operating license of a nuclear power plant. Compliance with the provisions... nuclear power plant. This document is necessary to clarify and correct the revisions made to the......

  20. An iterative approach for symmetrical and asymmetrical Short-circuit calculations with converter-based connected renewable energy sources

    DEFF Research Database (Denmark)

    Göksu, Ömer; Teodorescu, Remus; Bak-Jensen, Birgitte;

    2012-01-01

    As more renewable energy sources, especially more wind turbines are installed in the power system, analysis of the power system with the renewable energy sources becomes more important. Short-circuit calculation is a well known fault analysis method which is widely used for early stage analysis...... and design purposes and tuning of the network protection equipments. However, due to current controlled power converter-based grid connection of the wind turbines, short-circuit calculation cannot be performed with its current form for networks with power converter-based wind turbines. In this paper......, an iterative approach for short-circuit calculation of networks with power converter-based wind turbines is developed for both symmetrical and asymmetrical short-circuit grid faults. As a contribution to existing solutions, negative sequence current injection from the wind turbines is also taken into account...

  1. The Potential of Renewable Energy Sources in Latvia

    Science.gov (United States)

    Sakipova, S.; Jakovics, A.; Gendelis, S.

    2016-02-01

    The article discusses some aspects of the use of renewable energy sources in the climatic conditions prevailing in most of the territory of Latvia, with relatively low wind speeds and a small number of sunny days a year. The paper gives a brief description of the measurement equipment and technology to determine the parameters of the outer air; the results of the measurements are also analysed. On the basis of the data obtained during the last two years at the meteorological station at the Botanical Garden of the University of Latvia, the energy potential of solar radiation and wind was estimated. The values of the possible and the actual amount of produced energy were determined.

  2. Stochastic Optimal Scheduling of Residential Appliances with Renewable Energy Sources

    Energy Technology Data Exchange (ETDEWEB)

    Wu, Hongyu; Pratt, Annabelle; Chakraborty, Sudipta

    2015-07-03

    This paper proposes a stochastic, multi-objective optimization model within a Model Predictive Control (MPC) framework, to determine the optimal operational schedules of residential appliances operating in the presence of renewable energy source (RES). The objective function minimizes the weighted sum of discomfort, energy cost, total and peak electricity consumption, and carbon footprint. A heuristic method is developed for combining different objective components. The proposed stochastic model utilizes Monte Carlo simulation (MCS) for representing uncertainties in electricity price, outdoor temperature, RES generation, water usage, and non-controllable loads. The proposed model is solved using a mixed integer linear programming (MILP) solver and numerical results show the validity of the model. Case studies show the benefit of using the proposed optimization model.

  3. Report of the working group on the rationalization and simplification of the procedures applicable to power producers that use renewable energy sources; Rapport du groupe de travail sur la rationalisation et la simplification des procedures applicables aux producteurs d'electricite a partir de sources d'energie renouvelables

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-04-01

    After a recall of the general context of development of renewable energy sources in France, this report draws up an inventory of the procedures which concern the facilities that use renewable energy sources. Then, it examines the different criticisms that have been expressed about these procedures and about their modalities of enforcement. This analysis leads to a set of proposals which aims at restoring the expected legibility of the procedures with respect the operators of these facilities and at ensuring the necessary transparency and exemplariness with respect to the environment. (J.S.)

  4. Large scale renewable power generation advances in technologies for generation, transmission and storage

    CERN Document Server

    Hossain, Jahangir

    2014-01-01

    This book focuses on the issues of integrating large-scale renewable power generation into existing grids. The issues covered in this book include different types of renewable power generation along with their transmission and distribution, storage and protection. It also contains the development of medium voltage converters for step-up-transformer-less direct grid integration of renewable generation units, grid codes and resiliency analysis for large-scale renewable power generation, active power and frequency control and HVDC transmission. The emerging SMES technology for controlling and int

  5. Impacts of large-scale Intermittent Renewable Energy Sources on electricity systems, and how these can be modeled

    NARCIS (Netherlands)

    Brouwer, Anne Sjoerd; Van Den Broek, Machteld; Seebregts, Ad; Faaij, André

    2014-01-01

    The electricity sector in OECD countries is on the brink of a large shift towards low-carbon electricity generation. Power systems after 2030 may consist largely of two low-carbon generator types: Intermittent Renewable Energy Sources (IRES) such as wind and solar PV and thermal generators such as p

  6. Impacts of large-scale Intermittent Renewable Energy Sources on electricity systems, and how these can be modeled

    NARCIS (Netherlands)

    Brouwer, Anne Sjoerd|info:eu-repo/dai/nl/330822748; Van Den Broek, Machteld|info:eu-repo/dai/nl/092946895; Seebregts, Ad; Faaij, André

    The electricity sector in OECD countries is on the brink of a large shift towards low-carbon electricity generation. Power systems after 2030 may consist largely of two low-carbon generator types: Intermittent Renewable Energy Sources (IRES) such as wind and solar PV and thermal generators such as

  7. Biogas, as a renewable energy source, produced during the anaerobic digestion of organic waste

    CSIR Research Space (South Africa)

    Greben, H

    2009-10-01

    Full Text Available Identifying alternative sources of energy is a matter of urgency, since conventional energy sources are becoming exhausted. Renewable energy sources, such as biogas, can be generated from organic waste, through the anaerobic digestion (AD...

  8. Spirogyra biomass a renewable source for biofuel (bioethanol Production

    Directory of Open Access Journals (Sweden)

    Fuad Salem Eshaq

    2010-12-01

    Full Text Available Biofuels refer to renewable fuels from biological sources that can be used for heat, electricity and fuel. The fuels obtained from algae are termed as third generation fuels. The production of fuel from algae provides many advantages when compared to the fuel produced from other sources like agrobased raw materials. Other than environmental pollution control the algal biofuel will help in reduction of the fuel cost when compared to the agrobased and fossil fuels. In the present study algae specifically Spirogyra was used for the production of bioethanol by the fermentative process. A comparative study was carried out by using chemically pre-treated anduntreated Spirogyra biomass. The Spirogyra has a very simple cell wall made up of cellulose and starch that can be converted to ethanol by the fermentation process. The Spirogyra biomass was subjected to saccharification process by the fungal organism Aspergillus niger MTCCC 2196 for the hydrolysis, this process was followed by the fermentation using yeast Saccharomyces cerevisiae MTCC170 for the production of alcohol. A high yield of ethanol was recorded for untreated Spirogyra biomass when compared to chemically pre-treated biomass. The yield of alcohol using algal biomass is more when compared to alcohol produced from other sources like agrobased rawmaterials.

  9. Buying Renewable Electric Power in Montgomery County, Maryland

    Science.gov (United States)

    Cember, Richard P.

    2008-08-01

    From mid-August 2007 until mid-August 2008, my home electricity supply was 100% wind-generated. My experience in switching to wind-generated electric power may be of interest to fellow AGU members for three reasons. First, Montgomery County, Md., where I live, is one of the few jurisdictions in the United States that has both an electric power tax and a renewable energy credit. The county is therefore a case study in price-based public policy for greenhouse gas emissions control. Second, I was surprised by the comparatively small price difference (or ``price premium'') between wind-generated and conventionally generated power in the county, and I believe that Eos readers will be similarly surprised. Third, because so many U.S. federal agencies concerned with Earth science are based in the Washington, D. C., area, a high concentration of AGU members live in Montgomery County and may be personally interested in evaluating the price of reducing carbon dioxide emissions from the generation of their own residential electricity.

  10. The production of hydrogen fuel from renewable sources and its role in grid operations

    Science.gov (United States)

    Barton, John; Gammon, Rupert

    Understanding the scale and nature of hydrogen's potential role in the development of low carbon energy systems requires an examination of the operation of the whole energy system, including heat, power, industrial and transport sectors, on an hour-by-hour basis. The Future Energy Scenario Assessment (FESA) software model used for this study is unique in providing a holistic, high resolution, functional analysis, which incorporates variations in supply resulting from weather-dependent renewable energy generators. The outputs of this model, arising from any given user-definable scenario, are year round supply and demand profiles that can be used to assess the market size and operational regime of energy technologies. FESA was used in this case to assess what - if anything - might be the role for hydrogen in a low carbon economy future for the UK. In this study, three UK energy supply pathways were considered, all of which reduce greenhouse gas emissions by 80% by 2050, and substantially reduce reliance on oil and gas while maintaining a stable electricity grid and meeting the energy needs of a modern economy. All use more nuclear power and renewable energy of all kinds than today's system. The first of these scenarios relies on substantial amounts of 'clean coal' in combination with intermittent renewable energy sources by year the 2050. The second uses twice as much intermittent renewable energy as the first and virtually no coal. The third uses 2.5 times as much nuclear power as the first and virtually no coal. All scenarios clearly indicate that the use of hydrogen in the transport sector is important in reducing distributed carbon emissions that cannot easily be mitigated by Carbon Capture and Storage (CCS). In the first scenario, this hydrogen derives mainly from steam reformation of fossil fuels (principally coal), whereas in the second and third scenarios, hydrogen is made mainly by electrolysis using variable surpluses of low-carbon electricity. Hydrogen

  11. Power flow tracing in a simplified highly renewable European electricity network

    CERN Document Server

    Tranberg, Bo; Rodriguez, Rolando A; Andresen, Gorm B; Schäfer, Mirko; Greiner, Martin

    2015-01-01

    The increasing transmission capacity needs in a future energy system raise the question how associated costs should be allocated to the users of a strengthened power grid. In contrast to straightforward oversimplified methods, a flow tracing based approach provides a fair and consistent nodal usage and thus cost assignment of transmission investments. This technique follows the power flow through the network and assigns the link capacity usage to the respective sources or sinks using a diffusion-like process, thus taking into account the underlying network structure and injection pattern. As a showcase, we apply power flow tracing to a simplified model of the European electricity grid with a high share of renewable wind and solar power generation, based on long-term weather and load data with an hourly temporal resolution.

  12. Review of available power sources

    Energy Technology Data Exchange (ETDEWEB)

    Beard, Carl [CCLRC Daresbury Laboratory, Keckwick Lane, Daresbury, Warrington WA4 4AD (United Kingdom)]. E-mail: c.d.beard@dl.ac.uk

    2006-02-01

    Klystrons and triodes have been the accepted choice for particle accelerators because they produce high power RF and offer high gain (60 dB) with efficiencies of {approx}50%. Although fairly new to the market, inductive output tubes (IOTs) have become available at L-band frequencies and have maintained their high efficiency. The development of superconducting RF at the L-band frequency allows IOTs to become the choice for future accelerator programs. Due to the operational nature of SRF technology in energy recovery mode, there is no longer the requirement for large amounts of RF power from single sources. This report reviews some of the developments in RF power sources suitable for energy recovery linacs (ERLs)

  13. The Development of the Renewable Energy Power Industry under Feed-In Tariff and Renewable Portfolio Standard: A Case Study of China’s Photovoltaic Power Industry

    National Research Council Canada - National Science Library

    Yuzhuo Zhang; Xingang Zhao; Yi Zuo; Lingzhi Ren; Ling Wang

    2017-01-01

    ...) are the most popular to promote the development of renewable energy power industry. They can significantly contribute to the expansion of domestic industrial activities in terms of sustainable energy...

  14. Optimal mix of renewable power generation in the MENA region as a basis for an efficient electricity supply to europe

    Directory of Open Access Journals (Sweden)

    Alhamwi Alaa

    2014-01-01

    Full Text Available Renewable Energy sources are gaining importance in the Middle East and North Africa (MENA region. The purpose of this study is to quantify the optimal mix of renewable power generation in the MENA region, taking Morocco as a case study. Based on hourly meteorological data and load data, a 100% solar-plus-wind only scenario for Morocco is investigated. For the optimal mix analyses, a mismatch energy modelling approach is adopted with the objective to minimise the required storage capacities. For a hypothetical Moroccan energy supply system which is entirely based on renewable energy sources, our results show that the minimum storage capacity is achieved at a share of 63% solar and 37% wind power generations.

  15. The economic impacts of desert power. Socio-economic aspects of an EUMENA renewable energy transition

    Energy Technology Data Exchange (ETDEWEB)

    Blohmke, Julian; Sohm, Matthew; Zickfeld, Florian

    2013-06-15

    The countries of the Middle East and North Africa (MENA) are one of the world's largest potential growth markets for renewable energy generation. Countries throughout the region have recognized the great potential of their excellent wind and solar conditions, and ample empty space, and have ambitious plans to develop solar and wind energy. They are already making progress in realizing these renewables targets. They also increasingly recognize the great potential of renewable energy in tackling a range of challenges. At a time of high unemployment, particularly among youth, the growth of renewable energy provides an engine for creating new jobs and fostering new skill profiles among workers. Renewables can increase GDP and form the basis for a significant new source of trade revenues. As a source of energy, renewables reduce dependency on fossil fuels - whether as imports, to supply energy, or as exports. This report, Economic Impacts of Desert Power (EIDP), investigates how, and under what conditions, renewables in MENA can lead to socioeconomic benefits. EIDP shows, under various scenarios, how many jobs can be expected in three exemplary MENA countries, and how the expansion of renewables can lead to higher GDP growth rates across the region. EIDP pinpoints their economic impact across sectors and countries. At the same time, EIDP describes how these effects can be maximized through immediate and sustained policy support. The report also details how such support can be tailored to foster a self-sustaining market. In short, EIDP aims to contribute to a range of debates focused on how to maximize the benefits of green growth. EIDP illustrates the following points: - MENA can benefit economically from decarbonizing - even if the rest of the world does not pursue climate action. - Exporting excess electricity is an economic opportunity for MENA countries - several North African countries could create a major export industry with renewable electricity, which

  16. Comparative analyses of seven technologies to facilitate the integration of fluctuating renewable energy sources

    DEFF Research Database (Denmark)

    Mathiesen, Brian Vad; Lund, Henrik

    2009-01-01

    An analysis of seven different technologies is presented. The technologies integrate fluctuating renewable energy sources (RES) such as wind power production into the electricity supply, and the Danish energy system is used as a case. Comprehensive hour-by-hour energy system analyses are conducted...... and feasibility analyses. Large-scale heat pumps prove to be especially promising as they efficiently reduce the production of excess electricity. Flexible electricity demand and electric boilers are low-cost solutions, but their improvement of fuel efficiency is rather limited. Battery electric vehicles...

  17. “Team Play” between Renewable Energy Sources and Vehicle Fleet to Decrease Air Pollution

    Directory of Open Access Journals (Sweden)

    Michela Longo

    2015-12-01

    Full Text Available The reduction of air pollutants for the purpose of maintaining or improving air quality across the globe is a fundamental concern to which all modern governments are allocating varying amounts of attention and resources. The successful amelioration of air pollution requires strategic investments in the commercialization and adoption of “clean energy technologies” by both private and public entities, the conversion of contemporary houses to “smart houses”, the diffusion of Renewable Energy Sources (RES including photovoltaic systems (PV, wind farms, and different forms of bioenergy, and the integration of electric-powered vehicles. In concert with these ideas, this paper aims to discuss the possibility of undertaking a feasibility study in two countries Canada and Italy concerning the integration of electric vehicles (EVs and electric motorcycles (EMs. The proposed feasibility study would seek to assess the prospect of replacing the current vehicle fleets in these two countries with EVs in a manner that utilizes renewable energy sources and, thus, does not generate new toxic emissions. In conclusion, this study demonstrated that a pronounced introduction and distribution of RES, EVs, and EMs can operate as a great opportunity for both the environment and the capacities and needs of energy production. Today, the EV is not widespread. With this contribution, it is shown how EVs can be well integrated with renewable energy. Therefore, it is the duty of governments to implement policy strategies, in order to spread them across more territory.

  18. Voltage source inverters for high power, variable-voltage DC power sources

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Z. [Department of Engineering and Technology, De Montfort University, Queens Building, The Gateway, Leicester, LE1 9BH, (United Kingdom); Spooner, E. [School of Engineering, University of Durham, Science Laboratories, South Rd, Durham, DRI 3LE, (United Kingdom)

    2001-09-01

    The paper discusses the applications of voltage source inverter (VSI) based power electronic systems for interfacing variable-voltage DC sources to the grid. A variable-speed wind power conversion system is used for illustration, where the VSI-based interface needs to convert a variable DC voltage to a nearly constant AC voltage with high-quality power. The power control principles of VSI are described. Various system configurations and switching strategies are examined by analysis, simulation and experimental methods. It is shown that better utilisation of semiconductors and more flexible control may be achieved by using a separately controlled DC link, rather than a directly connected VSI that has to operate at a lower modulation ratio at higher power. In some cases, multipulse inverter structures may be preferred, despite higher component count, because of reduced switching losses, fault tolerance and the absence of filters. The solutions developed in the study could be applied at a different scale to other renewable energy sources, such as wave or solar photovoltaic devices. (Author)

  19. On the optimal timing of switching from non-renewable to renewable resources: dirty vs clean energy sources and the relative efficiency of generators

    OpenAIRE

    Elettra Agliardi; Luigi Sereno

    2012-01-01

    We develop a model on the optimal timing of switching from non-renewable to renewable energy sources with endogenous extraction choices under emission taxes, subsidies on renewable resources and abatement costs. We assume that non-renewable resources are "dirty" inputs and create environmental degradation, while renewable resources are more environmentally friendly, although they may be more or less productive than the exhaustible resources. The value of the switching option from non-renewabl...

  20. Optimal Scheduling of a Battery-Based Energy Storage System for a Microgrid with High Penetration of Renewable Sources

    DEFF Research Database (Denmark)

    Dulout, Jeremy; Hernández, Adriana Carolina Luna; Anvari-Moghaddam, Amjad

    2017-01-01

    A new scheduling method is proposed to manage efficiently the integration of renewable sources in microgrids (MGs) with energy storage systems (ESSs). The purpose of this work is to take into account the main stress factors influencing the ageing mechanisms of a battery energy storage system (BESS......) in order to make an optimal dispatch of resources in the microgrid and enhance the storage system lifetime while minimizing the cost of electric consumption. The load demand and generation profiles are derived from the analysis of consumption and renewable production (solar photovoltaic sources and wind...... turbines) of the Western Denmark electric grid. Thus, the proposed microgrid is mainly fed by renewable sources and few electricity is coming from the main grid (which helps operating costs minimization). In this respect, a cost analysis is performed to find the optimal hourly power output of the BESS...

  1. The renewable energies sources in France 1970-2000; Les energies renouvelables en France 1970-2000

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-07-01

    The objective of this report is to describe the energy production from renewable sources in France since 1970. In France the rate of using renewable energy sources is unequal. Some of them as hydro energy show a confirmed industrial and commercial interest when other techniques have not still reach the same level of maturity. The renewable energy sources chosen to calculate the electric and thermal production of France are: for electric power, hydro energy, wind energy, solar energy, geothermal energy, the urban wastes, the wood wastes, the harvesting residues, the biogas. For the thermal production, the thermal solar energy, the geothermal energy, the urban wastes, the wood and wood wastes, the harvesting residues, the biogas and bio fuels. The figures are marked in thirty tables. (N.C.)

  2. 风—光—沼可再生能源分布式发电系统电源规划%Power Source Planning of Wind-PV-Biogas Renewable Energy Distributed Generation System

    Institute of Scientific and Technical Information of China (English)

    马艺玮; 杨苹; 郭红霞; 吴捷

    2012-01-01

    To effectively improve the reliability and economy of distributed generation system (DGS) composed of renewable energy resources such as wind energy, solar energy and biogas energy, firstly the features of generation systems based on wind energy, solar energy and biogas energy respectively as well as the structural feature of generation system mixed with wind, solar and biogas energy resources were researched and analyzed, on this basis mathematical models of optimized objective functions of DGS composed of renewable energy resources and their constraint conditions were built. Secondly, due to the adoption of the selection operator, the improved adaptive crossover operator and the mutation operator in the elitist strategy of the improved adaptive genetic algorithm (AGA), to achieve better global search ability and stronger robustness, the improved AGA was utilized to optimize the expansion generation planning for distributed DGS. Finally, taking a load center with load amount of 300kW in Guangdong region, China as experimental platform, the simulation for the optimization and solution of a generation expansion planning of a distributed DGS composed of wind farm, PV generation and biogas generation were performed to determine the optimum configuration of power resources. The effectiveness and effectiveness of the proposed method were verified by simulation results that could be available for reference to the expansion generation planning for DGS composed of other types of renewable energy resources.%为了有效提高风—光—沼混合可再生能源分布式发电系统的可靠性和经济性,首先研究分析了风、光、沼各发电电源特点以及该分布式发电系统结构特征,并以此为基础建立了其系统电源规划的优化目标函数和约束条件函数等数学模型.由于改进的自适应遗传算法使用最优保存策略进化模型的选择算子、改进的自适应交叉算子和变异算子,来获得较优的全局搜

  3. Power Electronics – Key Technology for Renewable Energy Systems – Status and Future

    DEFF Research Database (Denmark)

    Blaabjerg, Frede; Yang, Yongheng; Ma, Ke

    2013-01-01

    The energy paradigms in many countries (e.g. Germany and Denmark) have experienced a significant change from fossil-based resources to clean renewables in the past few decades. The scenario of highly penetrated renewables is going to be further enhanced. This requires that the production...... play an essential role. Using highly efficient power electronics in power generation, power transmission/ distribution and end-user application, together with advanced control solutions, can pave the way for renewable energies. In view of this, some of the most emerging renewable energies, e.g. wind...

  4. Seasonal shifting of surplus renewable energy in a power system located in a cold region

    Directory of Open Access Journals (Sweden)

    Jorge Morel

    2014-10-01

    Full Text Available The Fukushima nuclear disaster in 2011 changed Japan's strategy for reducing CO2 emissions. The government is now placing more emphasis on the development of nonCO2-emitting distributed generation systems such as wind, solar, and tidal power to reduce greenhouse gas emissions and guarantee electricity supply in the case of a natural disaster. This paper proposes a strategy for the exploitation of wind, solar, and tidal resources in a cold region in Japan by utilizing surplus energy from the summer and spring during winter. It also aims to determine the most favorable energy mix of these renewable sources and storage system types. The study is performed by calculating hourly demand and renewable energy supply for the city in one year, which is based on actual data of demand, solar irradiation, wind speeds, and tidal current speeds. The costs of the components of the renewable power plants and storage systems are considered, and different proportions of generation outputs are evaluated with different types of storage systems. According to results, the configuration containing the hydrogen storage system using organic chemical hydride methylcyclohexane (OCHM is the most economical but is still more expensive than one using a conventional generation system. Moreover, we confirm that the cost of CO2 emissions is the key element for leveling the playing field between conventional and renewable generation from an economic perspective. The cost of CO2 emissions to public health as well as those costs related to the interruption of services during a catastrophe must be carefully calculated with other issues from conventional power projects to perform a precise comparative evaluation between both types of generation systems.

  5. DC Distributed Power Systems. Analysis, Design and Control for a Renewable Energy System

    Energy Technology Data Exchange (ETDEWEB)

    Karlsson, Per

    2002-12-01

    Renewable energy systems are likely to become wide spread in the future due to environmental demands. As a consequence of the dispersed nature of renewable energy systems, this implies that there will be a distributed generation of electric power. Since most of the distributed electrical energy sources do not provide their electric power at line frequency and voltage, a DC bus is a useful common connection for several such sources. Due to the differences in output voltage among the sources, depending on both the type of source and their actual operating point, the sources are connected to the DC power system via power electronic converters. The intention behind the presented work is not to replace the existing AC power system, but to include local DC power systems. The AC and DC power systems are connected at some points in the network. The renewable energy sources are weak compared to the present hydro power and nuclear power plants, resulting in a need of power conditioning before the renewable energy is fed to the transmission lines. The benefit of such an approach is that power conditioning is applied on a central level, i.e. at the interface between the AC and DC power systems. The thesis starts with an overview of related work. Present DC transmission systems are discussed and investigated in simulations. Then, different methods for load sharing and voltage control are discussed. Especially, the voltage droop control scheme is examined thoroughly. Since the droop control method does not require any high-speed communication between sources and loads, this is considered the most suitable for DC distributed power systems. The voltage feed back design of the controller also results in a specification of the DC bus capacitors (equivalents to DC link capacitors of single converters) needed for filtering. If the converters in the DC distribution system are equipped with capacitors selected from this design criterion and if the DC bus impedance is neglected, the

  6. DC Distributed Power Systems. Analysis, Design and Control for a Renewable Energy System

    Energy Technology Data Exchange (ETDEWEB)

    Karlsson, Per

    2002-12-01

    Renewable energy systems are likely to become wide spread in the future due to environmental demands. As a consequence of the dispersed nature of renewable energy systems, this implies that there will be a distributed generation of electric power. Since most of the distributed electrical energy sources do not provide their electric power at line frequency and voltage, a DC bus is a useful common connection for several such sources. Due to the differences in output voltage among the sources, depending on both the type of source and their actual operating point, the sources are connected to the DC power system via power electronic converters. The intention behind the presented work is not to replace the existing AC power system, but to include local DC power systems. The AC and DC power systems are connected at some points in the network. The renewable energy sources are weak compared to the present hydro power and nuclear power plants, resulting in a need of power conditioning before the renewable energy is fed to the transmission lines. The benefit of such an approach is that power conditioning is applied on a central level, i.e. at the interface between the AC and DC power systems. The thesis starts with an overview of related work. Present DC transmission systems are discussed and investigated in simulations. Then, different methods for load sharing and voltage control are discussed. Especially, the voltage droop control scheme is examined thoroughly. Since the droop control method does not require any high-speed communication between sources and loads, this is considered the most suitable for DC distributed power systems. The voltage feed back design of the controller also results in a specification of the DC bus capacitors (equivalents to DC link capacitors of single converters) needed for filtering. If the converters in the DC distribution system are equipped with capacitors selected from this design criterion and if the DC bus impedance is neglected, the

  7. Effects of Scandinavian hydro power on storage needs in a fully renewable European power system for various transmission capacity scenarios

    Science.gov (United States)

    Kies, Alexander; Nag, Kabitri; von Bremen, Lueder; Lorenz, Elke; Heinemann, Detlev

    2015-04-01

    The penetration of renewable energies in the European power system has increased in the last decades (23.5% share of renewables in the gross electricity consumption of the EU-28 in 2012) and is expected to increase further up to very high shares close to 100%. Planning and organizing this European energy transition towards sustainable power sources will be one of the major challenges of the 21st century. It is very likely that in a fully renewable European power system wind and photovoltaics (pv) will contribute the largest shares to the generation mix followed by hydro power. However, feed-in from wind and pv is due to the weather dependant nature of their resources fluctuating and non-controllable. To match generation and consumption several solutions and their combinations were proposed like very high backup-capacities of conventional power generation (e.g. fossile or nuclear), storages or the extension of the transmission grid. Apart from those options hydro power can be used to counterbalance fluctuating wind and pv generation to some extent. In this work we investigate the effects of hydro power from Norway and Sweden on residual storage needs in Europe depending on the overlaying grid scenario. High temporally and spatially resolved weather data with a spatial resolution of 7 x 7 km and a temporal resolution of 1 hour was used to model the feed-in from wind and pv for 34 investigated European countries for the years 2003-2012. Inflow into hydro storages and generation by run-of-river power plants were computed from ERA-Interim reanalysis runoff data at a spatial resolution of 0.75° x 0.75° and a daily temporal resolution. Power flows in a simplified transmission grid connecting the 34 European countries were modelled minimizing dissipation using a DC-flow approximation. Previous work has shown that hydro power, namely in Norway and Sweden, can reduce storage needs in a renewable European power system by a large extent. A 15% share of hydro power in Europe

  8. Optimal configuration of power generating systems in isolated island with renewable energy

    Energy Technology Data Exchange (ETDEWEB)

    Senjyu, Tomonobu; Hayashi, Daisuke; Yona, Atsushi; Urasaki, Naomitsu [Faculty of Engineering, University of the Ryukyus, 1 Senbaru, Nishihara-cho, Nakagami, Okinawa 903-0213 (Japan); Funabashi, Toshihisa [Meidensha Corporation, 36-2 Nihonbashi Hakozakicho, Chuo-ku, Tokyo 103-8515 (Japan)

    2007-09-15

    In isolated islands, usually diesel generators supply electric power. However, there are problems, e.g., a lack of fossil fuel, environmental pollution etc. So, isolated island, e.g. Miyako island, installs renewable energy power production plants. However, renewable energy power production plants are very costly. This paper presents an optimal configuration of power system in isolated island installing renewable energy power production plants. The generating system consists of diesel generators, wind turbine generators, PV system and batteries. Using the proposed method, operation cost can be reduced about 10% in comparison with diesel generators only from simulation results. (author)

  9. Biologically Produced Methane as a Renewable Energy Source.

    Science.gov (United States)

    Holmes, D E; Smith, J A

    2016-01-01

    Methanogens are a unique group of strictly anaerobic archaea that are more metabolically diverse than previously thought. Traditionally, it was thought that methanogens could only generate methane by coupling the oxidation of products formed by fermentative bacteria with the reduction of CO2. However, it has recently been observed that many methanogens can also use electrons extruded from metal-respiring bacteria, biocathodes, or insoluble electron shuttles as energy sources. Methanogens are found in both human-made and natural environments and are responsible for the production of ∼71% of the global atmospheric methane. Their habitats range from the human digestive tract to hydrothermal vents. Although biologically produced methane can negatively impact the environment if released into the atmosphere, when captured, it can serve as a potent fuel source. The anaerobic digestion of wastes such as animal manure, human sewage, or food waste produces biogas which is composed of ∼60% methane. Methane from biogas can be cleaned to yield purified methane (biomethane) that can be readily incorporated into natural gas pipelines making it a promising renewable energy source. Conventional anaerobic digestion is limited by long retention times, low organics removal efficiencies, and low biogas production rates. Therefore, many studies are being conducted to improve the anaerobic digestion process. Researchers have found that addition of conductive materials and/or electrically active cathodes to anaerobic digesters can stimulate the digestion process and increase methane content of biogas. It is hoped that optimization of anaerobic digesters will make biogas more readily accessible to the average person. Copyright © 2016 Elsevier Inc. All rights reserved.

  10. The Power Purchase Optimization Model in China considering the Renewable Energy Risks under Different Risk Preferences

    Directory of Open Access Journals (Sweden)

    Yongxiu He

    2015-01-01

    Full Text Available To achieve the strategic target of energy conservation and emission reduction, China is vigorously developing its large-scale and distributed renewable energy power generation industry, dominated by wind power and photovoltaic power generation. In the new situation of renewable energy power interconnection, the grid company in China must fully consider the risks caused by renewable energy when making power purchase optimization decisions. This paper sets up a power purchasing model considering the risks of the renewable energy power interconnection and testifies to the effectiveness of the model through a case study. On this basis, this paper puts forward several reasonable suggestions to help the grid company make power purchase decisions under different risk preferences.

  11. Seasonal optimal mix of wind and solar power in a future, highly renewable Europe

    DEFF Research Database (Denmark)

    Heide, Dominik; Bremen, Lueder von; Greiner, Martin

    2010-01-01

    behaviors are able to counterbalance each other to a certain extent to follow the seasonal load curve. The best point of counterbalancing represents the seasonal optimal mix between wind and solar power generation. It leads to a pronounced minimum in required stored energy. For a 100% renewable Europe......The renewable power generation aggregated across Europe exhibits strong seasonal behaviors. Wind power generation is much stronger in winter than in summer. The opposite is true for solar power generation. In a future Europe with a very high share of renewable power generation those two opposite...... the seasonal optimal mix becomes 55% wind and 45% solar power generation. For less than 100% renewable scenarios the fraction of wind power generation increases and that of solar power generation decreases....

  12. AC Power Routing System in Home Based on Demand and Supply Utilizing Distributed Power Sources

    Directory of Open Access Journals (Sweden)

    Takashi Hikihara

    2011-04-01

    Full Text Available To help reduce consumption of fossil fuels, renewable, natural and distributed power sources are being adopted. These alternative energy sources inevitably show fluctuations in the amount of output power, frequency, and voltage. The suppression of such fluctuations is a key issue to avoid disturbances in power grids. A similar situation arises as far as the regulation of in-home power flow is concerned. We focus on the quality of supplied and demanded power in particular. In this paper, an in-home power distribution system based on information of power is proposed. The system is developed in order to integrate power dispatch and communication. The experimental results show the feasibility of new flexible and efficient power management approaches.

  13. 3. report of study group 6.2 ''new market for gas - technology evaluation'': factor analysis on penetration of gas cooling; biogas, a renewable energy source; micro- and mini- combined heat and power generation

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-07-01

    Over the past ten years, the hoped for growth of an international air conditioning market fueled by natural gas, has not lived up to expectations. The purpose of this report is to assess causal factors and to pinpoint any key areas for corrective action, if our successes are to be enhanced. We started by evaluating the conditions in the Japanese market that allowed for the most successful penetration of the gas cooling market in the world, and then built a model that describes those conditions. Next we examined the market criteria and constructed models for two cities in the U.S., and for France and Spain, and then compared the results against the Japanese model. Biogas is the name given to a gas mixture with high methane content resulting from the bacteriological fermentation of organic material in an anaerobic environment. In addition to combustible methane gas, the mixture contains carbon dioxide, water and lesser amounts of other components. Today, there is an increased demand in some of the worlds' markets for environmentally friendly and sustainable energy systems. The fact that biogas is just as clean as natural gas and is renewable can be used by the natural gas industry in their efforts to increase gas demand. As natural gas can benefit from biogas, biogas can also benefit from natural gas. Biogas needs the support of the resources of the natural gas industry, such as infrastructure, marketing and research to become one, albeit small, part of our energy supply. IGU SG 6.2 presents in this paper a short description of the possible uses of biogas, a description of the biogas process, the different technologies for production, cleaning and upgrading biogas to natural gas quality, and some of the marketing concepts that have been successfully employed. A world-wide trend towards decentralized power generation is being observed in those countries where electricity is generated in centralized fossil-fuelled power stations. This is due to a variety of

  14. Smoothing effect for spatially distributed renewable resources and its impact on power grid robustness

    CERN Document Server

    Nagata, Motoki; Fujiwara, Naoya; Tanaka, Gouhei; Suzuki, Hideyuki; Aihara, Kazuyuki

    2015-01-01

    In this paper, we show that spatial correlation of renewable energy outputs greatly influences the robustness of power grids. First, we propose a new index for the spatial correlation among renewable energy outputs. We find that the spatial correlation of renewable energy outputs in a short time-scale is as weak as that caused by independent random variables and that in a long time-scale is as strong as that under perfect synchronization. Then, by employing the topology of the power grid in eastern Japan, we analyze the robustness of the power grid with spatial correlation of renewable energy outputs. The analysis is performed by using a realistic differential-algebraic equations model and the result shows that the spatial correlation of the energy resources strongly degrades the robustness of the power grid. Our result suggests that the spatial correlation of the renewable energy outputs should be taken into account when estimating the stability of power grids.

  15. Compact portable electric power sources

    Energy Technology Data Exchange (ETDEWEB)

    Fry, D.N.; Holcomb, D.E.; Munro, J.K.; Oakes, L.C.; Matson, M.J.

    1997-02-01

    This report provides an overview of recent advances in portable electric power source (PEPS) technology and an assessment of emerging PEPS technologies that may meet US Special Operations Command`s (SOCOM) needs in the next 1--2- and 3--5-year time frames. The assessment was performed through a literature search and interviews with experts in various laboratories and companies. Nineteen PEPS technologies were reviewed and characterized as (1) PEPSs that meet SOCOM requirements; (2) PEPSs that could fulfill requirements for special field conditions and locations; (3) potentially high-payoff sources that require additional R and D; and (4) sources unlikely to meet present SOCOM requirements. 6 figs., 10 tabs.

  16. Fiscal Policy for Renewable Energy Sources and Its Economic Impact

    Directory of Open Access Journals (Sweden)

    Rita Helbra Tenrini

    2014-01-01

    Full Text Available Indonesia is the largest producers of palm oil. Along with the increasing demand for renewable energy source, palm oil will turn to be a very important commodity in the future. The palm oil industry will gain more value-added if they export the commodities in processed materials rather than raw materials. On the other hands palm oil industry more likely to export raw material, because there’s no incentives for them to export processed materials. Therefore, to give an incentive to palm oil industry, the government of Indonesia should give fiscal incentives to encourage palm oil industry to produce processed materials. The purpose of this study is to identify the appropriate fiscal policy to palm oil industry and to estimate the economic impact due to the implementation of fiscal incentives policy. The methodology used in this research is analysis using Social Accounting Matrix (SAM that can give an overview the impact of policy implementation to factors of production, an institution such as government and household, and other sectors including palm oil sectors itself. The result of this study that is the proposed fiscal policy in palm oil industry was fiscal incentives in the form of VAT exemption. Economic impact analysis that came from SAM indicates that implementation of the policy has an overall positive impact to factors of production, institution and sector.

  17. Biomass - alternative renewable energy source to the fossil fuels

    Directory of Open Access Journals (Sweden)

    Koruba Dorota

    2017-01-01

    Full Text Available The article presents the fossil fuels combustion effects in terms of the dangers of increasing CO2 concentration in the atmosphere. Based on the bibliography review the negative impact of increased carbon dioxide concentration on the human population is shown in the area of the external environment, particularly in terms of the air pollution and especially the impact on human health. The paper presents biomass as the renewable energy alternative source to fossil fuels which combustion gives a neutral CO2 emissions and therefore should be the main carrier of primary energy in Poland. The paper presents the combustion heat results and humidity of selected dry wood pellets (pellets straw, energy-crop willow pellets, sawdust pellets, dried sewage sludge from two sewage treatment plants of the Holly Cross province pointing their energy potential. In connection with the results analysis of these studies the standard requirements were discussed (EN 14918:2010 “Solid bio-fuels-determination of calorific value” regarding the basic parameters determining the biomass energy value (combustion heat, humidity.

  18. BIOMASS AS A RENEWABLE SOURCE OF CHEMICALS FOR INDUSTRIAL APPLICATIONS

    Directory of Open Access Journals (Sweden)

    Ahmed, M. Murtala

    2012-02-01

    Full Text Available Worldwide demand for cleaner burning fuels and ‘clean’ chemicals has been increasing from the global issues of environmental concern. This lead to a greater utilization of renewable resources to replace the old and existing fossil based feedstock for liquid fuels and chemicals. The ability to re-grow harvested biomass and recapture the carbon emitted to the atmosphere through photosynthesis allows the possibility of carbon neutrality encouraged the use of biomass. Moreso, the unstable rise of oil prices, the negative effects of petroleum on the environment and the advantages of biomass towards sustainability of resources accelerated the development and utilization of unused biomass. This paper reviewed some of the potentials of biomass as a source of chemicals for industrial applications. Pyrolysis is considered to be one of the most employed technologies for the conversion of biomass into bio-oil, char and gases. The utilization of biomass for chemical manufacture can significantly eliminate the harmful effects of fossil based chemicals on the environment.

  19. Waste cooking oil as source for renewable fuel in Romania

    Science.gov (United States)

    Allah, F. Um Min; Alexandru, G.

    2016-08-01

    Biodiesel is non-toxic renewable fuel which has the potential to replace diesel fuel with little or no modifications in diesel engine. Waste cooking oil can be used as source to produce biodiesel. It has environmental and economic advantages over other alternative fuels. Biodiesel production from transesterification is affected by water content, type f alcohol, catalyst type and concentration, alcohol to oil ratio, temperature, reaction rate, pH, free fatty acid (FFA) and stirrer speed. These parameters and their effect on transesterification are discussed in this paper. Properties of biodiesel obtained from waste cooking oil are measured according to local standards by distributor and their comparison with European biodiesel standard is also given in this paper. Comparison has shown that these properties lie within the limits of the EN 14214 standard. Furthermore emission performance of diesel engine for biodiesel-diesel blends has resulted in reduction of greenhouse gas emissions. Romanian fuel market can ensure energy security by mixing fuel share with biodiesel produced from waste cooking oil. Life cycle assessment of biodiesel produced from waste cooking oil has shown its viability economically and environmentally.

  20. Simulation of long term renewable energy feed-in for European power system studies

    Science.gov (United States)

    Kies, Alexander; Nag, Kabitri; von Bremen, Lueder; Lorenz, Elke; Heinemann, Detlev; Späth, Stephan

    2014-05-01

    Renewable energies already play a remarkable role in Europe as of today. It is expected that wind and solar amongst other renewables will contribute strongly to the future European energy generation. However, wind and solar generation facilities have due to the weather dependent nature of their resources highly fluctuating feed-in profiles. To overcome the mismatch between energy demand and generation it is important to study and understand the generation patterns and balancing potentials. The goal of the current work is to investigate how the feed-in time series from different renewable sources like on- and offshore wind, photovoltaic, solar thermal, wave, hydro, geothermal and biomass power and combination of them look like in an European power supply system . The work is part of the RESTORE 2050 project (BMU) that investigates the requirements for cross-country grid extensions, usage of storage technologies and capacities, the development of new balancing technologies and the conceptual design of the future energy market which is suitable for high generation percentages of solar and wind. High temporally and spatially resolved long term weather data from COSMO-EU, MERRA and Meteosat (MFG/MSG) satellite data has been used to simulate feed-in from several types of renewable energy sources on a 7 x 7 km grid covering Europe. For wind speeds MERRA reanalysis data has been statistically downscaled to account for orography. Generation was aggregated on the country level and production patterns and their variations in time of different resources were investigated for the years ranging from 2002 to 2012. In a first step the quality of the simulated feed in time series has been investigated by comparison to real observations of wind power and PV generation. Furthermore, some sensitivity studies with respect to underlying assumptions like spatial distribution of wind and PV capacities, the chosen hub-height and wind power curve have been done and will be presented. While

  1. Sustainable renewable energy seawater desalination using combined-cycle solar and geothermal heat sources

    KAUST Repository

    Missimer, Thomas M.

    2013-01-01

    Key goals in the improvement of desalination technology are to reduce overall energy consumption, make the process "greener," and reduce the cost of the delivered water. Adsorption desalination (AD) is a promising new technology that has great potential to reduce the need for conventional power, to use solely renewable energy sources, and to reduce the overall cost of water treatment. This technology can desalt seawater or water of even higher salinity using waste heat, solar heat, or geothermal heat. An AD system can operate effectively at temperatures ranging from 55 to 80 °C with perhaps an optimal temperature of 80 °C. The generally low temperature requirement for the feedwater allows the system to operate quite efficiently using an alternative energy source, such as solar power. Solar power, particularly in warm dry regions, can generate a consistent water temperature of about 90 °C. Although this temperature is more than adequate to run the system, solar energy collection only can occur during daylight hours, thereby necessitating the use of heat storage during nighttime or very cloudy days. With increasing capacity, the need for extensive thermal storage may be problematic and could add substantial cost to the development of an AD system. However, in many parts of the world, there are subsurface geothermal energy sources that have not been extensively used. Combining a low to moderate geothermal energy recovery system to an AD system would provide a solution to the thermal storage issue. However, geothermal energy development from particularly Hot Dry Rock is limited by the magnitude of the heat flow required for the process and the thermal conductivity of the rock material forming the heat reservoir. Combining solar and geothermal energy using an alternating 12-h cycle would reduce the probability of depleting the heat source within the geothermal reservoir and provide the most effective use of renewable energy. © 2013 Desalination Publications.

  2. A Review on the Development of Gravitational Water Vortex Power Plant as Alternative Renewable Energy Resources

    Science.gov (United States)

    Rahman, M. M.; Tan, J. H.; Fadzlita, M. T.; Khairul Muzammil, A. R. Wan

    2017-07-01

    Gravitational water vortex power plant is a green technology that generates electricity from alternative or renewable energy source. In the vortex power plant, water is introduced into a circular basin tangentially that creates a free vortex and energy is extracted from the free vortex by using a turbine. The main advantages of this type of power plant is the generation of electricity from ultra-low hydraulic pressure and it is also environmental friendly. Since the hydraulic head requirement is as low as 1m, this type of power plant can be installed at a river or a stream to generate electricity for few houses. It is a new and not well-developed technology to harvest electricity from low pressure water energy sources. There are limited literatures available on the design, fabrication and physical geometry of the vortex turbine and generator. Past researches focus on the optimization of turbine design, inlets, outlets and basin geometry. However, there are still insufficient literatures available for the technology to proceed beyond prototyping stage. The maximum efficiency obtained by the researchers are approximately 30% while the commercial companies claimed about 50% of efficiency with 500W to 20kW of power generated. Hence, the aim of this paper is to determine the gap in the vortex power plant technology development through past works and a set of research recommendations will be developed as efforts to accelerate the development of GWVPP.

  3. Water Storage Instead of Energy Storage for Desalination Powered by Renewable Energy—King Island Case Study

    Directory of Open Access Journals (Sweden)

    Aya Tafech

    2016-10-01

    Full Text Available In this paper, we scrutinized the energy storage options used in mitigation of the intermittent nature of renewable energy resources for desalination process. In off-grid islands and remote areas, renewable energy is often combined with appropriate energy storage technologies (ESTs to provide a consistent and reliable electric power source. We demonstrated that in developing a renewable energy scheme for desalination purposes, product (water storage is a more reliable and techno-economic solution. For a King Island (Southeast Australia case-study, electric power production from renewable energy sources was sized under transient conditions to meet the dynamic demand of freshwater throughout the year. Among four proposed scenarios, we found the most economic option by sizing a 13 MW solar photovoltaic (PV field to instantly run a proportional RO desalination plant and generate immediate freshwater in diurnal times without the need for energy storage. The excess generated water was stored in 4 × 50 ML (mega liter storage tanks to meet the load in those solar deficit times. It was also demonstrated that integrating well-sized solar PV with wind power production shows more consistent energy/water profiles that harmonize the transient nature of energy sources with the water consumption dynamics, but that would have trivial economic penalties caused by larger desalination and water storage capacities.

  4. 46 CFR 129.310 - Power sources.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Power sources. 129.310 Section 129.310 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) OFFSHORE SUPPLY VESSELS ELECTRICAL INSTALLATIONS Power Sources and Distribution Systems § 129.310 Power sources. (a)(1) Each vessel that relies on electricity to power the following loads must be...

  5. 46 CFR 183.310 - Power sources.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Power sources. 183.310 Section 183.310 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) SMALL PASSENGER VESSELS (UNDER 100 GROSS TONS) ELECTRICAL INSTALLATION Power Sources and Distribution Systems § 183.310 Power sources. (a)(1) Each vessel that relies on electricity to power the...

  6. System Dynamic Model for the Accumulation of Renewable Electricity using Power-to-Gas and Power-to-Liquid Concepts

    Science.gov (United States)

    Blumberga, Andra; Timma, Lelde; Blumberga, Dagnija

    2015-12-01

    When the renewable energy is used, the challenge is match the supply of intermittent energy with the demand for energy therefore the energy storage solutions should be used. This paper is dedicated to hydrogen accumulation from wind sources. The case study investigates the conceptual system that uses intermitted renewable energy resources to produce hydrogen (power-to-gas concept) and fuel (power-to-liquid concept). For this specific case study hydrogen is produced from surplus electricity generated by wind power plant trough electrolysis process and fuel is obtained by upgrading biogas to biomethane using hydrogen. System dynamic model is created for this conceptual system. The developed system dynamics model has been used to simulate 2 different scenarios. The results show that in both scenarios the point at which the all electricity needs of Latvia are covered is obtained. Moreover, the methodology of system dynamics used in this paper is white-box model that allows to apply the developed model to other case studies and/or to modify model based on the newest data. The developed model can be used for both scientific research and policy makers to better understand the dynamic relation within the system and the response of system to changes in both internal and external factors.

  7. System Dynamic Model for the Accumulation of Renewable Electricity using Power-to-Gas and Power-to-Liquid Concepts

    Directory of Open Access Journals (Sweden)

    Blumberga Andra

    2015-12-01

    Full Text Available When the renewable energy is used, the challenge is match the supply of intermittent energy with the demand for energy therefore the energy storage solutions should be used. This paper is dedicated to hydrogen accumulation from wind sources. The case study investigates the conceptual system that uses intermitted renewable energy resources to produce hydrogen (power-to-gas concept and fuel (power-to-liquid concept. For this specific case study hydrogen is produced from surplus electricity generated by wind power plant trough electrolysis process and fuel is obtained by upgrading biogas to biomethane using hydrogen. System dynamic model is created for this conceptual system. The developed system dynamics model has been used to simulate 2 different scenarios. The results show that in both scenarios the point at which the all electricity needs of Latvia are covered is obtained. Moreover, the methodology of system dynamics used in this paper is white-box model that allows to apply the developed model to other case studies and/or to modify model based on the newest data. The developed model can be used for both scientific research and policy makers to better understand the dynamic relation within the system and the response of system to changes in both internal and external factors.

  8. The Development of the Renewable Energy Power Industry under Feed-In Tariff and Renewable Portfolio Standard: A Case Study of China’s Photovoltaic Power Industry

    Directory of Open Access Journals (Sweden)

    Yuzhuo Zhang

    2017-03-01

    Full Text Available Among the regulatory policies, feed-in tariffs (FIT and renewable portfolio standards (RPS are the most popular to promote the development of renewable energy power industry. They can significantly contribute to the expansion of domestic industrial activities in terms of sustainable energy. In this paper, we synthetically consider various important factors with the analysis of the existing literature, and use system dynamics (SD to establish models of long-term development of the renewable energy power industry under FIT and RPS schemes. The model not only clearly shows the complex logical relationship between the factors but also reveals the process of coordination between the two policy tools in the development of the renewable energy power industry. In addition, as an example of development of renewable energy industry, the paper studies the development of China’s photovoltaic power industry under different scenarios. The models proposed in this paper can provide a reference for scholars to study development of the renewable energy power industry in different countries, thereby facilitating an understanding of the renewable energy power’s long-term sustainable development pattern under FIT and RPS schemes, and helping to provide references for policy-making institutions. The results show that in the perfect competitive market, the implementation of RPS can promote long-term and rapid development of China’s photovoltaic power industry given the constraints and actions of the mechanisms of RPS quota proportion, the TGC valid period, and fines, compared with FIT. At the end of the paper, policy implications are offered as references for the government.

  9. Implications of renewable energy technologies in the Bangladesh power sector. Long-term planning strategies

    Energy Technology Data Exchange (ETDEWEB)

    Mondal, Alam Hossain

    2010-10-04

    Bangladesh is facing daunting energy challenges: Security concerns over growing fuel imports, limited domestic energy resources for power generation, and projected demands for electricity that will exceed domestic supply capabilities within a few years. By acknowledging the potential of renewable energy resources, the country could possibly meet its unprecedented energy demand, thus increasing electricity accessibility for all and enhancing energy security through their advancement. The integration of renewable energy technologies in the power sector through national energy planning would, therefore, be a step in the right direction, not only for sustainable development of the country but also as part of Bangladesh's responsibility toward the global common task of environmental protection. This study estimates the potential of renewable energy sources for power generation in Bangladesh from the viewpoint of different promising available technologies. Future long-term electricity demand in Bangladesh is projected based on three economic growth scenarios. The energy planning model LEAP is applied to forecast the energy requirements from 2005 to 2035. Different policy scenarios, e.g., accelerated renewable energy production, null coal import, CO2 emission reduction targets and carbon taxes in the power sector from 2005 to 2035 are explored. The analyses are based on a long-term energy system model of Bangladesh using the MARKAL model. Prospects for the power sector development of the country are identified, which ensure energy security and mitigate environmental impacts. The technical potential of grid-connected solar photovoltaic and wind energy are estimated at 50174 MW and 4614 MW, respectively. The potential of energy from biomass and small hydro power plants is estimated at 566 MW and 125 MW, respectively. Total electricity consumption was 18 TWh in 2005 and is projected to increase about 7 times to 132 TWh by 2035 in the low GDP growth scenario. In the

  10. SWOT analysis of the renewable energy sources in Romania - case study: solar energy

    Science.gov (United States)

    Lupu, A. G.; Dumencu, A.; Atanasiu, M. V.; Panaite, C. E.; Dumitrașcu, Gh; Popescu, A.

    2016-08-01

    The evolution of energy sector worldwide triggered intense preoccupation on both finding alternative renewable energy sources and environmental issues. Romania is considered to have technological potential and geographical location suitable to renewable energy usage for electricity generation. But this high potential is not fully exploited in the context of policies and regulations adopted globally, and more specific, European Union (EU) environmental and energy strategies and legislation related to renewable energy sources. This SWOT analysis of solar energy source presents the state of the art, potential and future prospects for development of renewable energy in Romania. The analysis concluded that the development of solar energy sector in Romania depends largely on: viability of legislative framework on renewable energy sources, increased subsidies for solar R&D, simplified methodology of green certificates, and educating the public, investors, developers and decision-makers.

  11. Introduction of renewable energy sources in the district heating system of Greece

    Directory of Open Access Journals (Sweden)

    Nikolaos Margaritis

    2016-06-01

    Full Text Available The district heating (DH system of Greece, mainly supported from lignite fired stations, is facing lately significant challenges. Stricter emission limits, decreased efficiency due to old age and increased costs are major challenges of the lignite sector and are expected to result in the decommissioning of several lignite-fired units in the coming years. As a result, managers of DH networks are currently investigating alternative scenarios for the substitution of thermal power that it is expected to be lost, through the integration of Renewable Energy Sources (RES into the system. In this paper, the DH systems of Kozani and Ptolemaida are examined regarding possible introduction of RES. The first study examines district heating of Kozani and alternative future options for covering a part of city’s thermal load whereas the second study refers to a biomass CHP plant (ORC technology, 1MWe, 5MWth to be powered from a biomass mixture (wood chips and straw.

  12. Impacts of Renewable Energy Quota System on China's Future Power Sector

    DEFF Research Database (Denmark)

    Xiong, Weiming; Zhang, Da; Mischke, Peggy

    2014-01-01

    As the biggest carbon emitting sector which produces 44% of current national carbon emission in China, the coal-dominated power sector has a tremendous potential for CO2 mitigation in the next two decades. Renewable energy quota system is currently discussed as a potential future policy instrument...... for the power sector, which requires certain fraction of renewable energy in total power generation for each province and grid zone. The quantitative studies on renewable energy quota for China are still very limited. Based on a least-cost and technology-rich power generation and transmission expansion model...... for China, this study examines the impacts of renewable energy quota system and carbon cap policy instruments on the future Chinese power sector. Various scenarios are examined toward 2030 and their future power generation mix, capacity installations and carbon emission are discussed. This study concludes...

  13. Can renewable energy replace nuclear power in Korea? An economic valuation analysis

    Energy Technology Data Exchange (ETDEWEB)

    Park, Soo Ho [Korea Institute for Advancement of Technology, Korea Technology Center, Seoul (Korea, Republic of); Jung, Woo Jin [Graduate School of Information, Yonsei University, Seoul (Korea, Republic of); Kim, Tae Hwan; Lee, Sang Yong Tom [School of Business, Hanyang University, Seoul (Korea, Republic of)

    2016-04-15

    This paper studies the feasibility of renewable energy as a substitute for nuclear and energy by considering Korean customers' willingness to pay (WTP). For this analysis, we use the contingent valuation method to estimate the WTP of renewable energy, and then estimate its value using ordered logistic regression. To replace nuclear power and fossil energy with renewable energy in Korea, an average household is willing to pay an additional 102,388 Korean Won (KRW) per month (approx. US $85). Therefore, the yearly economic value of renewable energy in Korea is about 19.3 trillion KRW (approx. US $16.1 billion). Considering that power generation with only renewable energy would cost an additional 35 trillion KRW per year, it is economically infeasible for renewable energy to be the sole method of low-carbon energy generation in Korea.

  14. Marine renewable energies. When researchers consider the ocean as an energy source. Offshore wind power. The thermal energy of seas, a solar resource to be no longer neglected. Lipid biofuels production by micro-algae; Energies Renouvelables marines. Quand les chercheurs voient l'ocean comme source d'energie. L'eolien offshore. L'energie thermique des mers, ressource solaire a ne plus negliger. La production de biocarburant lipidiques par des microalgues

    Energy Technology Data Exchange (ETDEWEB)

    Ruer, J. [Saipen SA, 78 - Saint Quentin en Yvelines (France); Gauthier, M. [Ifremer, 92 - Issy les Moulineaux (France); Zaharia, R. [CNES, 75 - Paris (France); Cadoret, J.P. [IFREMER, Lab. de Physiologie et Biologie des Algues, 44 - Nantes (France)

    2008-03-15

    In the present day context of search for renewable energy sources, it is surprising that the oceans energy, potentially enormous, is poorly taken into consideration with respect to the other renewable energy sources, while France has been a pioneer in this domain with the construction of the Rance tidal power plant in the 1960's, and still in operation today. However, the scientific community, and in particular the IFREMER institute in France, is developing R and D programs on marine energy technologies. On the other hand, the development of wind power is growing up rapidly with a worldwide installed capacity exceeding today 94000 MW and supplying 3% of the electricity consumed in Europe. The development of offshore wind farms represents today 1122 MW and should grow up very fast in the coming years. The ocean is also a huge reservoir of thermal energy which can be exploited to generate electricity and desalinated water. Finally, the cultivation of micro-algae for the enhanced production of lipids may be a more ecological alternative to the terrestrial production of biofuels, strongly criticized today for its long term environmental impacts. (J.S.)

  15. Utilizing hydropower for load balancing non-storable renewable energy sources - technical and environmental challenges

    Science.gov (United States)

    Alfredsen, K. T.; Killingtveit, A.

    2011-12-01

    About 99% of the total energy production in Norway comes from hydropower, and the total production of about 120 TWh makes Norway Europe's largest hydropower producer. Most hydropower systems in Norway are based on high-head plants with mountain storage reservoirs and tunnels transporting water from the reservoirs to the power plants. In total, Norwegian reservoirs contributes around 50% of the total energy storage capacity in Europe. Current strategies to reduce emission of greenhouse gases from energy production involve increased focus on renewable energy sources, e.g. the European Union's 202020 goal in which renewable energy sources should be 20% of the total energy production by 2020. To meet this goal new renewable energy installations must be developed on a large scale in the coming years, and wind power is the main focus for new developments. Hydropower can contribute directly to increase renewable energy through new development or extensions to existing systems, but maybe even more important is the potential to use hydropower systems with storage for load balancing in a system with increased amount of non-storable renewable energies. Even if new storage technologies are under development, hydro storage is the only technology available on a large scale and the most economical feasible alternative. In this respect the Norwegian system has a high potential both through direct use of existing reservoirs and through an increased development of pump storage plants utilizing surplus wind energy to pump water and then producing during periods with low wind input. Through cables to Europe, Norwegian hydropower could also provide balance power for the North European market. Increased peaking and more variable operation of the current hydropower system will present a number of technical and environmental challenges that needs to be identified and mitigated. A more variable production will lead to fluctuating flow in receiving rivers and reservoirs, and it will also

  16. The impact of monsoon intraseasonal variability on renewable power generation in India

    Science.gov (United States)

    Dunning, C. M.; Turner, A. G.; Brayshaw, D. J.

    2015-06-01

    India is increasingly investing in renewable technology to meet rising energy demands, with hydropower and other renewables comprising one-third of current installed capacity. Installed wind-power is projected to increase 5-fold by 2035 (to nearly 100GW) under the International Energy Agency's New Policies scenario. However, renewable electricity generation is dependent upon the prevailing meteorology, which is strongly influenced by monsoon variability. Prosperity and widespread electrification are increasing the demand for air conditioning, especially during the warm summer. This study uses multi-decadal observations and meteorological reanalysis data to assess the impact of intraseasonal monsoon variability on the balance of electricity supply from wind-power and temperature-related demand in India. Active monsoon phases are characterized by vigorous convection and heavy rainfall over central India. This results in lower temperatures giving lower cooling energy demand, while strong westerly winds yield high wind-power output. In contrast, monsoon breaks are characterized by suppressed precipitation, with higher temperatures and hence greater demand for cooling, and lower wind-power output across much of India. The opposing relationship between wind-power supply and cooling demand during active phases (low demand, high supply) and breaks (high demand, low supply) suggests that monsoon variability will tend to exacerbate fluctuations in the so-called demand-net-wind (i.e., electrical demand that must be supplied from non-wind sources). This study may have important implications for the design of power systems and for investment decisions in conventional schedulable generation facilities (such as coal and gas) that are used to maintain the supply/demand balance. In particular, if it is assumed (as is common) that the generated wind-power operates as a price-taker (i.e., wind farm operators always wish to sell their power, irrespective of price) then investors in

  17. Chance-Constrained AC Optimal Power Flow for Distribution Systems With Renewables

    Energy Technology Data Exchange (ETDEWEB)

    DallAnese, Emiliano; Baker, Kyri; Summers, Tyler

    2017-09-01

    This paper focuses on distribution systems featuring renewable energy sources (RESs) and energy storage systems, and presents an AC optimal power flow (OPF) approach to optimize system-level performance objectives while coping with uncertainty in both RES generation and loads. The proposed method hinges on a chance-constrained AC OPF formulation where probabilistic constraints are utilized to enforce voltage regulation with prescribed probability. A computationally more affordable convex reformulation is developed by resorting to suitable linear approximations of the AC power-flow equations as well as convex approximations of the chance constraints. The approximate chance constraints provide conservative bounds that hold for arbitrary distributions of the forecasting errors. An adaptive strategy is then obtained by embedding the proposed AC OPF task into a model predictive control framework. Finally, a distributed solver is developed to strategically distribute the solution of the optimization problems across utility and customers.

  18. Of paradise and clean power: The effect of California's renewable portfolio standard on in-state renewable energy generation

    Science.gov (United States)

    Yin, Clifton Lee

    Renewable portfolio standards (RPS), policies that encourage acquisition of electricity from renewable energy sources, have become popular instruments for discouraging the use of climate change inducing-fossil fuels. There has been limited research, however, that empirically evaluates their effectiveness. Using data gathered by three governmental entities -- the federal-level Energy Information Administration and two California agencies, the Employment Development Department and the Department of Finance -- this paper investigates the impact of California's RPS, one of the nation's most ambitious such policies, on in-state renewable energy generation. It finds that the California RPS did not bring about a one-time increase in generation with its inception, nor did it compel an increase in generation over time. These results raise questions as to the best way to structure RPS policies in light of growing interest in the establishment of a national RPS.

  19. Can renewable energy sources satiate Slovakia's future energy needs?

    Energy Technology Data Exchange (ETDEWEB)

    Tomis, Igor; Koval, Peter; Janicek, Frantisek; Darula, Ivan

    2010-09-15

    The paper examines the options for replacing the current energy mix of non-renewable, conventional energy sources solely with renewable sources in the long term within the context of the Slovak environment, possibly combined with nuclear energy in the 50-year horizon. Vital needs are outlined in household energy consumption and energy consumption for industrial and transportation purposes to fulfil in order for Slovakia to become independent of foreign sources in energy supplies.

  20. PROFIT MAXIMIZATION AND OPTIMAL SIZING OF RENEWABLE ENERGY SOURCES IN A HYBRID SYSTEM

    Directory of Open Access Journals (Sweden)

    YAJVENDER PAL VERMA

    2010-09-01

    Full Text Available The renewable energy sources wind, solar etc. have become very essential and important in the generation mix as a result of rising energy demand and environmental reasons. In addition tax is being imposed on high carbon emission. But the uncertainty and variability associated with renewable such as wind may result in economical andtechnical problems in the power system. In order to compensate wind intermittency, generation resources such as gas plant, pumped storage unit etc. are employed due to their lesser start up time, lower operating cost and good ramping capabilities. This paper proposes a model which investigates the combined operation of thermal, wind andpumped storage units for the profit maximization in varying wind, load, and price scenarios. The optimal size of the pumped storage unit to be used has been obtained after putting the system to different operating conditions such as varying wind power and load demand, imposing tax on carbon emission and varying ramping limits etc. The model has been applied on IEEE-30 bus test data and satisfactory results have been obtained for optimal hybrid systemoperation.

  1. Renewable Energy Zones: Delivering Clean Power to Meet Demand, Greening the Grid

    Energy Technology Data Exchange (ETDEWEB)

    Hurlbut, David; Chernyakhovskiy, Ilya; Cochran, Jaquelin

    2016-05-01

    Greening the Grid provides technical assistance to energy system planners, regulators, and grid operators to overcome challenges associated with integrating variable renewable energy into the grid. This document describes the renewable energy zone concept that has emerged as a transmission planning tool to help scale up the penetration of solar, wind, and other resources on the power system.

  2. 77 FR 58181 - Power Resources, Inc., Smith Ranch Highland Uranium Project; License Renewal Request, Opportunity...

    Science.gov (United States)

    2012-09-19

    ... COMMISSION Power Resources, Inc., Smith Ranch Highland Uranium Project; License Renewal Request, Opportunity...-415- 4737, or by email to pdr.resource@nrc.gov . The ADAMS accession number for each document... is referenced. The Smith Ranch Highland Uranium Project license renewal request is...

  3. The Evolution of Power System Planning with High Levels of Variable Renewable Generation

    Energy Technology Data Exchange (ETDEWEB)

    Katz, Jessica [National Renewable Energy Lab. (NREL), Golden, CO (United States); Milligan, Michael [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2016-09-01

    Greening the Grid provides technical assistance to energy system planners, regulators, and grid operators to overcome challenges associated with integrating variable renewable energy into the grid. This document, part of the Greening the Grid introduces the evolution of power system planning with high levels of variable renewable generation.

  4. Renewable energy sources and climate change mitigation: special report of the Intergovernmental Panel on Climate Change

    National Research Council Canada - National Science Library

    Edenhofer, Ottmar

    2012-01-01

    ... and economic development, to energy access, to a secure and sustainable energy supply, and to a reduction of negative impacts of energy provision on the environment and human health. This Special Report on Renewable Energy Sources and Climate Change Mitigation (SRREN) impartially assesses the scientific literature on the potential role of renew...

  5. Biosynthesis of planet friendly bioplastics using renewable carbon source.

    Science.gov (United States)

    Jain, Roopesh; Tiwari, Archana

    2015-01-01

    Plastics are uniquely flexible materials that offer considerable benefits as a simple packing to complex engineering material. Traditional synthetic polymers (often called plastics), such as polypropylene and polyethylene have been derived from non-renewable petrochemicals and known to cause environmental concerns due to their non-biodegradable nature. The enormous use of petroleum-based plastic compounds emphasized a need for sustainable alternatives derived from renewable resources. Bioplastics have attracted widespread attention, as eco-friendly and eco-tolerable alternative. But they have got certain limitations as well, such as high cost of production and unsatisfactory mechanical properties. In this study we have found agriculture waste (AW) as low-cost and renewable substrate for the production of bioplastics in bacterial fermentation. Improvement in tensile properties of produced bioplastic film has also been documented upon blending with Cellulose Acetate Butyrate (CAB).

  6. Potential of renewable energy sources and its applications in Yakushima Island

    Energy Technology Data Exchange (ETDEWEB)

    Uemura, Yoshimitsu; Kai, Takami; Natori, Rintarou; Takahashi, Takeshige; Hatate, Yasuo; Yoshida, Masahiro [Kagoshima University (Japan). Dept. of Applied Chemistry and Chemical Engineering

    2004-04-01

    A study was carried out to see if the potential of renewable energy sources other than hydroelectric power, such as wind, photovoltaic, solar thermal, biomass and waste energy sources, can meet the current energy consumption in Yakushima. The current electricity consumption can be covered by wind and photovoltaic energy sources. The total potential of wind and photovoltaic energy sources is 5.4 times as much as the current electricity consumption. LP gas and kerosene can be replaced by solar thermal and biogas energy. The potential of plant biomass and municipal waste is not sufficient (approximately one third) to cover the rest of the fossil fuels (gasoline, diesel oil and heavy oil). Also, plant biomass and municipal waste must be converted into fluid form. This shortage can be covered by the potential of wind and photovoltaic energy sources. We also investigated the possibility of tourism expansion using the potential of wind and photovoltaic energy sources. Taking into account three types of capacity (energy, accommodation and transportation), Yakushima can accept approximately four times as many tourists as the current number of tourists. (author)

  7. Expert assessment of advanced power sources

    Energy Technology Data Exchange (ETDEWEB)

    Gardner, C.L. [March Scientific Ltd., Dunrobin, ON (Canada)

    2007-07-15

    The technology trends to year 2020 in advanced power sources were identified by Defence Research and Development Canada (DRDC) in a comprehensive technical report dated August 2001, in which research and development opportunities were prioritized. However, due to heightened national security adopted by the Canadian Department of National Defence (DND) following September 11, 2001, developments in power source technology have proceeded at an accelerated pace. In response to this rapid development in the field of advanced power sources, the 2001 report has been updated to reexamine the advanced power source area. This report described the results of this update. Eight power source technologies were selected for study, notably batteries; fuel cells; microengines; pulse power; energy harvesting; small nuclear reactors; radioisotopic power sources; hybrid systems and power management. A questionnaire was distributed to technical experts on each power source technology in order to gather information. The experts were asked specifically what role nanotechnology is expected to play in the development of advanced power sources. March Scientific Ltd. also surveyed the various power source areas independently. The ability of the various power sources to meet the requirements of important military applications was analyzed with reference to total system weight, state-of-development and supply logistics. A Technology Readiness Level document was subsequently prepared for each of the power source technology areas. 62 refs., 21 tabs., 16 figs.

  8. Renewable energy sources in Basque Country. Recursos energeticos renovables en la comunidad autonoma del Pais Vasco

    Energy Technology Data Exchange (ETDEWEB)

    Ente Vasco de la Energia (EVE. Vitoria (Spain))

    1992-07-01

    The Autonomous Basque Energy Authority makes an analysis on the final results obtained during 1980 decade promoting renewable energies: Minihydroelectric power plants, solar thermal, photovoltaics, biomass and Wind Energy. New goals until the year 2000 are outlined.

  9. Regenerative Burner System for Thermoelectric Power Sources.

    Science.gov (United States)

    1979-07-01

    wy aid id.nt lfy by block nsaib.r) • k’ all and (or • Thermoelectric ~t special Regenerative Burner Power Sources - 20. AS TRACT (Contlnu. on r...ELECTRIC POWER SOURCES C. Cuazgo~t , J. Angello, & A. Rerchshow.ki Power Source. Division US Army Electronic. Technology and Devices Laboratory

  10. Power Electronics – The Key Technology for Renewable Energy System Integration

    DEFF Research Database (Denmark)

    Blaabjerg, Frede; Yang, Yongheng; Ma, Ke

    2015-01-01

    The energy paradigms in many countries (e.g. Germany and Denmark) have experienced a significant change from fossil-based resources to clean renewables (e.g. wind turbines and photovoltaics) in the past few decades. The scenario of highly penetrated renewables is going to be further enhanced...... solutions makes the way for renewable energies. In light of this, some of the most emerging renewable energies, e.g. wind energy and photovoltaic, which by means of power electronics are changing character as a major part in the electricity generation, are explored in this presentation. Issues like...

  11. A DSP based power electronics interface for alternate/renewable energy systems. Quarterly report 3.

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-31

    This report is an update on the research project involving the implementation of a DSP based power electronics interface for alternate/renewable energy systems that was funded by the Department of Energy under the Inventions and Innovations program 1998. The objective of this research is to develop a utility interface (dc to ac converter) suitable to interconnect alternate/renewable energy sources to the utility system. The DSP based power electronics interface in comparison with existing methods will excel in terms of efficiency, reliability and cost. Moreover DSP-based control provides the flexibility to upgrade/modify control algorithms to meet specific system requirements. The proposed interface will be capable of maintaining stiffness of the ac voltages at the point of common coupling regardless of variation in the input dc bus voltage. This will be achieved without the addition of any extra components to the basic interface topology but by inherently controlling the inverter switching strategy in accordance to the input voltage variation.

  12. Hydrogen Generation Through Renewable Energy Sources at the NASA Glenn Research Center

    Science.gov (United States)

    Colozza, Anthony; Prokopius, Kevin

    2007-01-01

    An evaluation of the potential for generating high pressure, high purity hydrogen at the NASA Glenn Research Center (GRC) was performed. This evaluation was based on producing hydrogen utilizing a prototype Hamilton Standard electrolyzer that is capable of producing hydrogen at 3000 psi. The present state of the electrolyzer system was determined to identify the refurbishment requirements. The power for operating the electrolyzer would be produced through renewable power sources. Both wind and solar were considered in the analysis. The solar power production capability was based on the existing solar array field located at NASA GRC. The refurbishment and upgrade potential of the array field was determined and the array output was analyzed with various levels of upgrades throughout the year. The total available monthly and yearly energy from the array was determined. A wind turbine was also sized for operation. This sizing evaluated the wind potential at the site and produced an operational design point for the wind turbine. Commercially available wind turbines were evaluated to determine their applicability to this site. The system installation and power integration were also addressed. This included items such as housing the electrolyzer, power management, water supply, gas storage, cooling and hydrogen dispensing.

  13. A potential of utilizing renewable energy sources and the state support in Slovakia

    Directory of Open Access Journals (Sweden)

    Lívia Bodonská

    2007-04-01

    Full Text Available The renewable energy sources are domestic sources of energy that help to enhance the safety of energy supplies and the diversification of energy sources. The utilization of such sources complies with the environmental acceptability requirement and leads to a reduction in greenhouse gas emissions. The renewable energy is proved to be commercially viable for a growing list of consumers and uses. The renewable energy technologies provide many benefits that go well beyond the energy alone. More and more, the renewable energies contribute to the three pillars of the sustainable development in the economy, environment and the society.Several renewable energy technologies are established in world markets, building global industries and infrastructures. Other renewables become competitive in growing markets, and some are widely recognised as the lowest cost option for stand-alone and offgrid applications. An increased utilization of renewable energy sources in the heat and electricity generation is one of priority tasks of the Slovak Republic to boost the use of domestic energy potential and thus to decrease the Slovakia’s dependence on imported fossil fuels.

  14. A DSP based power electronics interface for alternative /renewable energy system.

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-09-28

    This report is an update on the research project involving the implementation of a DSP-based power electronics interface for alternate/renewable energy systems, that was funded by the Department of Energy under the Inventions and Innovations program.

  15. Integrating High Levels of Variable Renewable Energy into Electric Power Systems

    Energy Technology Data Exchange (ETDEWEB)

    Kroposki, Benjamin D. [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

    2017-08-01

    As more variable renewable energy is integrated into electric power systems, there are a range of challenges and solutions to accommodating very high penetration levels. This presentation highlights some of the recent research in this area.

  16. The Optimal Use of Renewable Energy Sources-The Case of Lemnos Island

    DEFF Research Database (Denmark)

    Koroneos, C.; Xydis, George; Polyzakis, A.

    2012-01-01

    energy needs from Renewable Energy Sources taking into consideration a multiplicity of criteria such as environmental impacts, energy demand, energy cost, and resources availability. A series of solutions have resulted, based on deterministic model runs, providing decision makers the flexibility...

  17. Renewable energy source use in Brazil; Utilizacao de energia renovavel no Brasil

    Energy Technology Data Exchange (ETDEWEB)

    Newman, Joseph; Rosa, Fabio, e-mails: jnewman@winrock.org.br, e-mail: fabrosa@terra.com.br

    2003-08-15

    This article evaluates the programs (PROINFA and CCC) developed by the State to deploy a policy of using renewable energy sources in Brazil, highlighting the biodiesel, which should be inserted in its energy matrix.

  18. Guide to funding sources for renewable energy in schools and colleges

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-07-01

    This guide has been designed specifically to identify sources of funding for renewable energy projects in schools, such as a wind generator or a solar water heating system. It is intended for teachers or Friends of associations. (author)

  19. Renewable energy research 1995–2009: a case study of wind power research in EU, Spain, Germany and Denmark

    DEFF Research Database (Denmark)

    Sanz-Casado, Elias; Garcia- Zorita, J. Carlos; Serrano-López, Antonio Eleazar

    2013-01-01

    and German world shares as well as citation impact are negative during the most recent 7 year period. During the same time the citation impact of Spain and Denmark increase and place both nations among the top-ranking countries in Wind Power research. Spain is the only EU country that increases its world....... Scientometric indicators include publication collaboration ratios, top-player distribution as well as citedness and correspondence analyses of citing publications, relative citation impact, distributions of topcited as well as top-citing institutions and publication sources and cluster analysis of citing title...... terms to map knowledge export areas. Findings show an increase in citation impact for Renewable Energy and Wind Power research albeit hampered by scarcely cited conference papers. Although EU maintains its global top position in producing Renewable Energy and Wind Power research the developments of EU...

  20. Curtailment in a Highly Renewable Power System and Its Effect on Capacity Factors

    Directory of Open Access Journals (Sweden)

    Alexander Kies

    2016-06-01

    Full Text Available The capacity factor of a power plant is the ratio of generation over its potential generation. It is an important measure to describe wind and solar resources. However, the fluctuating nature of renewable power generation makes it difficult to integrate all generation at times. Whenever generation exceeds the load, curtailment or storage of energy is required. With increasing renewable shares in the power system, the level of curtailment will further increase. In this work, the influence of the curtailment on the capacity factors for a highly renewable German power system is studied. An effective capacity factor is introduced, and the implications for the distribution of renewable power plants are discussed. Three years of highly-resolved weather data were used to model wind and solar power generation. Together with historical load data and a transmission model, a possible future German power system was simulated. It is shown that effective capacity factors for unlimited transmission are strongly reduced by up to 60% (wind and 70% (photovoltaics and therefore of limited value in a highly renewable power system. Furthermore, the results demonstrate that wind power benefits more strongly from a reinforced transmission grid than photovoltaics (PV does.

  1. Electricity production by intermittent renewable sources: a synthesis of French and German studies

    Science.gov (United States)

    Grand, D.; Le Brun, Ch.; Vidil, R.; Wagner, F.

    2016-09-01

    Wind and solar electricity is produced without direct CO2 emissions. However, the introduction of this electricity in the grid is delicate due to the intermittent character of its sources. Wind and solar production is characterized by multiple, strong variations in the electric power. These variations put stress on the grid where the total production of electricity must always be equal to the consumption. We present a synthesis of five studies conducted for Germany and France with different assumptions of electricity mixes, all with large shares of wind and solar power. These mixes are subjected to the dynamics of wind and solar production as recorded in 2010 (Germany), 2012 and 2013 (Germany and France). Common structural trends are exhibited when the results of simulations (instantaneous power distributions and average annual values) are expressed as a percentage of the annual reduced load to be produced by these intermittent energies. We focus on the evaluation of these trends and the resulting constraints on the grid. The results obtained make it possible to anticipate the problems brought about by a large share of renewable intermittent energies in the production of electricity. They show the need for backup production in order to complement the intermittent sources. This leads to CO2 emissions unless storage systems of large capacity are available.

  2. The current status of the development of renewable energy sources worldwide and in Russia

    Science.gov (United States)

    Fortov, V. E.; Popel', O. S.

    2014-06-01

    Resorting to renewable energy sources (RESs) as one of the bases of the promising world energy industry has become a logical result of the historical development and the recognition that is necessary to diversify primary energy sources being used, with the aim of enhancing both energy and ecological security of countries, regions, and concrete energy consumers. The review of the development of new technologies used for conversion of RESs, the progress of which can be characterized by the fact that by the year 2013 the total generating capacity of RES-based power plants now in operation has amounted to 500 GW—by a factor of 1.5 more than the total generating capacity of all nuclear power stations in the world. The paper presents an analysis of the current status of RESs and problems that restrain their development in Russia. It is noted that the peculiarities of the energy situation in Russia impose the specific requirements upon drawing up the programs of the development of RESs. Along with the use of RESs as part of systems of centralized energy supply, which is a priority for most industrially developed countries and promises the most large-scale introduction of RESs in Russia, it is necessary, first of all, to give attention to the development and creation of systems for independent supply of consumers with power and heat and the development of distributed powergenerating systems using RESs.

  3. Spatiotemporal Modeling for Assessing Complementarity of Renewable Energy Sources in Distributed Energy Systems

    Science.gov (United States)

    Ramirez Camargo, L.; Zink, R.; Dorner, W.

    2015-07-01

    Spatial assessments of the potential of renewable energy sources (RES) have become a valuable information basis for policy and decision-making. These studies, however, do not explicitly consider the variability in time of RES such as solar energy or wind. Until now, the focus is usually given to economic profitability based on yearly balances, which do not allow a comprehensive examination of RES-technologies complementarity. Incrementing temporal resolution of energy output estimation will permit to plan the aggregation of a diverse pool of RES plants i.e., to conceive a system as a virtual power plant (VPP). This paper presents a spatiotemporal analysis methodology to estimate RES potential of municipalities. The methodology relies on a combination of open source geographic information systems (GIS) processing tools and the in-memory array processing environment of Python and NumPy. Beyond the typical identification of suitable locations to build power plants, it is possible to define which of them are the best for a balanced local energy supply. A case study of a municipality, using spatial data with one square meter resolution and one hour temporal resolution, shows strong complementarity of photovoltaic and wind power. Furthermore, it is shown that a detailed deployment strategy of potential suitable locations for RES, calculated with modest computational requirements, can support municipalities to develop VPPs and improve security of supply.

  4. SPATIOTEMPORAL MODELING FOR ASSESSING COMPLEMENTARITY OF RENEWABLE ENERGY SOURCES IN DISTRIBUTED ENERGY SYSTEMS

    Directory of Open Access Journals (Sweden)

    L. Ramirez Camargo

    2015-07-01

    Full Text Available Spatial assessments of the potential of renewable energy sources (RES have become a valuable information basis for policy and decision-making. These studies, however, do not explicitly consider the variability in time of RES such as solar energy or wind. Until now, the focus is usually given to economic profitability based on yearly balances, which do not allow a comprehensive examination of RES-technologies complementarity. Incrementing temporal resolution of energy output estimation will permit to plan the aggregation of a diverse pool of RES plants i.e., to conceive a system as a virtual power plant (VPP. This paper presents a spatiotemporal analysis methodology to estimate RES potential of municipalities. The methodology relies on a combination of open source geographic information systems (GIS processing tools and the in-memory array processing environment of Python and NumPy. Beyond the typical identification of suitable locations to build power plants, it is possible to define which of them are the best for a balanced local energy supply. A case study of a municipality, using spatial data with one square meter resolution and one hour temporal resolution, shows strong complementarity of photovoltaic and wind power. Furthermore, it is shown that a detailed deployment strategy of potential suitable locations for RES, calculated with modest computational requirements, can support municipalities to develop VPPs and improve security of supply.

  5. The Opportunity of Using Wind to Generate Power as a Renewable Energy:"Case of Kuwait”

    Directory of Open Access Journals (Sweden)

    Abdelkarim J.Ibreik

    2015-01-01

    Full Text Available The demand ofsustainable energy is increased daily by expanding our cities and creating new cities and suburbswith huge towers besides increasing in population,moreover the environment and human life is threatening by the pollutions resulted from energy generation. For this reason the researchersattracted todevelop renewable energy and explore its large benefits and unit capacity. Wind power is one of the clean renewable energy resources.Therefore the importance of implementing this resource in Kuwait draws our attention to make this research to emphasis on the technical and economic aspects due to acceptable environmental conditions. Whereas, in some areas of the world, such as in Japan, has some geographical and electrical restrictions such as power fluctuating for land wind generation. And the introductionof large amount of wind power generation tends to be extremely difficult and even impossible in some location. This research is aimed to concentrate on the visibility of utilizing the wind energy as complementary source for the existing steam and gas turbine power stations in Kuwait, furthermore point out the economical perspectives that will guide us to take the right decision. The location of wind farms is very important in this aspect where we cannot build such projects inside the cities between buildings besides meeting the minimum requirements for economic generation. The study prove to us that even at a location which is almost close to the inhabitants buildings ( Kuwait airport can get accepted results the historical data was collected from the weather station at internet. The implementation of wind turbine farms is foreseen to be economic in generation for long run and encouragestepping up toward putting the infrastructure design. Furthermoreit is an opportunity for creating new job vacancies.

  6. BASIC APPROACHES TO THE RESEARCH OF RENEWABLE SOURCES OF ENERGY AS THE ENERGY POTENTIAL OF TERRITORIES AND BUILT-UP AREAS

    Directory of Open Access Journals (Sweden)

    Poddaeva Olga Igorevna

    2012-10-01

    renewable sources of energy include water, sun, and wind. Wind power engineering best fits the conditions of the Russian territories. However, experts believe that the wind power is to be backed by other sources due to the irregularity of its generation. This approach to the power generation and planning of territories coupled with the integration of renewable energy technologies into architectural designs of buildings and structures will make it possible to identify the prerequisites for the energy generation specialization of the subjects of the Russian Federation on the basis of their climatic conditions and urban development patterns. Private investments into renewable sources of energy will assure sustainable population settlement patterns and optimal energy generation and consumption.

  7. Fuel Cells for Balancing Fluctuation Renewable Energy Sources

    DEFF Research Database (Denmark)

    Mathiesen, Brian Vad

    2007-01-01

    In the perspective of using fuel cells for integration of fluctuating renewable energy the SOFCs are the most promising. These cells have the advantage of significantly higher electricity efficiency than competing technologies and fuel flexibility. Fuel cells in general also have the advantage of...... with hydrogen production or electric cars, and on the other hand using biomass and bio fuels [11]. Fuel cells can have an important role in these future energy systems.......In the perspective of using fuel cells for integration of fluctuating renewable energy the SOFCs are the most promising. These cells have the advantage of significantly higher electricity efficiency than competing technologies and fuel flexibility. Fuel cells in general also have the advantage...... flexibility, such as SOFCs, heat pumps and heat storage technologies are more important than storing electricity as hydrogen via electrolysis in energy systems with high amounts of wind [12]. Unnecessary energy conversions should be avoided. However in future energy systems with wind providing more than 50...

  8. Strategies for the integration of intermittent renewable energy sources in the electrical system

    Science.gov (United States)

    Romanelli, Francesco

    2016-03-01

    Europe is pursuing an aggressive programme to increase its share of renewable energy source (RES). However, the integration of intermittent RES (wind and photovoltaic) in the electrical system requires either maintaining in operation thermal backup systems or providing a substantial amount of electricity storage. We analyze the Italian electricity data for the year 2013 provided by the transmission system operator TERNA. The present level of intermittent RES power is scaled-up to a level at which it generates an amount of electricity equal to the annual demand. While a substantial reduction of the energy annually produced by fossil backup systems (and the associated CO2 emission) with respect to the no-RES case is possible in many scenarios considered here, the backup power is generally only marginally reduced below the value in the absence of RES. The strategy proposed is based on the combination of a modest amount of storage (0.5-5TWh) and base-load power (6-15GW, to be used during the seasons of low RES production). In this way the non-RES installed power can be reduced from ˜ 50 GW to less than 15GW and could be covered by a combination of biomass and nuclear energy without any CO2 emission.

  9. High step-up isolated efficient single switch DC-DC converter for renewable energy source

    Directory of Open Access Journals (Sweden)

    A. Gopi

    2014-12-01

    Full Text Available In this paper, an isolated high step-up single switch DC-DC converter for renewable energy source is proposed. In the proposed converter high step-up voltage is obtained by single power switching technique that operates low duty cycle with isolated transformer inductors and switched capacitors and power diodes. The disadvantage of conventional converters is that it has high duty ratio and high voltage stress on power devices with less efficiency. The proposed converter eliminates the switching losses and recycles the leakage energy which includes reverse recovery energy of the power diode by using passive clamp circuit. To achieve high output voltage gain, the isolated transformer primary terminal and secondary terminal are connected in series during switching operation. PSIM software has been used for simulation. Simulation circuit is analyzed at 40Vdc/400Vdc, 200 W and this operation is validated by implementing in the hardware model at 12Vdc/120Vdc, 60 W.

  10. The smoothing effect for renewable resources in an Afro-Eurasian power grid

    Science.gov (United States)

    Krutova, Maria; Kies, Alexander; Schyska, Bruno U.; von Bremen, Lueder

    2017-07-01

    Renewable power systems have to cope with highly variable generation. Increasing the spatial extent of an interconnected power transmission grid smooths the feed-in by exchange of excess energy over long distances and therefore supports renewable power integration. In this work, we investigate and quantify the balancing potential of a supergrid covering Europe, Africa and Asia. We use ten years of historical weather data to model the interplay of renewable generation and consumption and show that a pan-continental Afro-Eurasian supergrid can smooth renewable generation to a large extent and reduce the need for backup energy by around 50 %. In addition, we show that results for different weather years vary by up to approximately 50 %.

  11. TOWARDS A RESILIENT ENERGY SYSTEM IN EASTERN ROMANIA – FROM FOSSIL FUELS TO RENEWABLE SOURCES

    Directory of Open Access Journals (Sweden)

    BĂNICĂ Alexandru

    2015-12-01

    Full Text Available The study takes into account the two Romanian Eastern regions (North East and South East trying to emphasize the post-communist dynamics of the energy sector in order to draw a general perspective for the future evolution towards both energy security and a clean environment. Before 1989, the energy sector, that had to sustain not only the population needs, but also an oversized manufacturing industry, was based on big power plants usually using coal and oil and highly polluting the environment. The hydropower had a rather small share in the total energy production. This inherited system was very much resistant after the end of the centralized political system, therefore after the general industrial decline the energy sector remained the main source of air pollution in many towns and cities from Romania. Meanwhile, in the last 6-7 years, due to a favourable national political context, we assisted, especially in the analysed area, to an important emergence of renewable energy investments (mainly wind and solar energy, but also biomass or hydro-energy. Our purpose is to evaluate, from a geographical point of view, the extent and the implications of a desirable progressive shift from fossil fuels to renewable energy that could radically change the territorial relations and sustain development on the long term.

  12. Economic costs and benefits of the renewable energy sources; Costi e benefici economici delle fonti rinnovabili

    Energy Technology Data Exchange (ETDEWEB)

    De Leo, G. A. [Parma Univ., Parma (Italy). Dipt. di Scienze Ambientali; Rizzi, L. [Milan Politecnico, Milan (Italy). Dipt. di Elettronica; Caizzi, A. [Cesi Spa, Business Unit Ambiente, Milan (Italy)

    2001-08-01

    In this work it has been analysed the potential diffusion of renewable energy sources and co-generation in the Italian market on the basis of the level of maturation of the different technologies, predicted market growth and environmental impacts associated to them. A sensitivity analysis on external costs generated by global climate changes has allowed everybody to assess how possible errors in estimating the potential impact of greenhouse gasses can affect the estimate of the economic performances of different scenarios of energetic development. On the basis of these considerations, it can be outlined a potential doubling of energy production by renewable energies in the next 10 years, with specific reference of small hydroelectric, biogass and eolic power plants. [Italian] Viene analizzata la capacita' di penetrazione delle fonti di energia rinnovabile e della cogenerazione nel mercato italiano sulla base dello stato di maturazione delle varie tecnologie e gli impatti ambientali ad esse associate. L'articolo mostra che il rispetto del vincolo di Kyoto comporterebbe in ultima analisi non un aggravio dei costi per la collettivita', ma addirittura un risparmio di 11 lire per ogni kWh prodotto, ovvero oltre il 10% rispetto ai costi totali.

  13. An Analysis of the Development of Renewable Energy Sources in the Western Minority Areas

    Institute of Scientific and Technical Information of China (English)

    Deng Yanfei; Liu Mingyang

    2016-01-01

    The biggest challenge for China’s energy is sustainability of the environment. Espe-cially in recent years, global warming, frequent natural disasters, and the serious reduction of the natural resources and energy are gravely affecting normal production and mankind’s existence. Burn-ing large amounts of fossil fuel produces green-house gases and polluted soot. The development and utilization of renewable energy is extremely ur-gent. In other words, renewable energy sources must grow briskly. Under the guidance of the na-tional policy of the“13 th Five Year Plan”, the de-velopment and utilization of renewable energy sources in the Western Minority Areas must be strengthened based on local conditions, by paying attention to relevant personnel training, and en-couraging innovation and entrepreneurship so that the development of local renewable energy sources can reach a new level.

  14. ONE WATT 30-DAY PLUS POWER SOURCES.

    Science.gov (United States)

    Four alternative power sources are considered as replacements for the mercury cells which are currently used. Of these, silver-zinc batteries can...percent. Hydrogen-air and hydrogen-oxygen fuel cells offer no advantage over present power sources . Solar cell-battery power systems are advisable for some applications. (Author)

  15. 46 CFR 120.310 - Power sources.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Power sources. 120.310 Section 120.310 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) SMALL PASSENGER VESSELS CARRYING MORE THAN 150 PASSENGERS OR WITH OVERNIGHT ACCOMMODATIONS FOR MORE THAN 49 PASSENGERS ELECTRICAL INSTALLATION Power Sources and Distribution Systems § 120.310 Power...

  16. Analyze the economic and environmental viability in distributed generation of electric power from renewable sources; Analise da viabilidade economica e socioambiental na geracao distribuida de energia eletrica a partir de fontes renovaveis

    Energy Technology Data Exchange (ETDEWEB)

    Jantim Neto, Humberto [Universidade Estadual de Campinas (UNICAMP), SP (Brazil)

    2010-07-01

    This paper brings a brief of economical and social environmental analysis about distributed electric's energy generation, based on a comparison to centralized generation. The motivation of the proposed analysis has its origin on a reflection about politics and scheming directed to Brazilian's energy sector. This study has renewable energy resources as setting, represented for Belo Monte generation's plant and undertaking registered on the Reservation's Energy Auction 2010. The study took into account economics and technical aspects, whereas the viability analysis was formed from benefits got from different forms of electric's generation. The conclusions of this shows that distributed electric's energy generation may have economics and socio environment benefits over centralized generation. (author)

  17. Energy system modelling – interactions and synergies in a highly renewable Pan-European power system

    Directory of Open Access Journals (Sweden)

    Weitemeyer Stefan

    2014-01-01

    Full Text Available It is very likely that the European power supply system will be transformed in the next decades to a low carbon system based almost entirely on Renewable Energy Sources (RES. However, due to the natural fluctuations of the most powerful RES (wind and solar energy, it is also very likely that a significant amount of balancing and controllable backup power capacities will be required to ensure a stable grid operation. This implies high additional investments and operating costs. Therefore this work provides an overview of potential options and possibly more cost-effective alternatives to the installation of costly storage capacities, namely grid expansion, demand side management, an optimised mix between different RES as well as the use of overcapacities. Furthermore, the paper provides an approximation of the maximum RES penetration of the German electricity system in the absence of significant storage capacities. Our calculations show that from a numerical perspective on average approximately half of the load can be met by RES if flexible conventional power stations would provide the remaining electricity demand. However, in a 100% RES scenario a significant amount of storage capacities as well as limited overcapacities are required to ensure a reliable electricity supply.

  18. Energy system modelling - interactions and synergies in a highly renewable Pan-European power system

    Science.gov (United States)

    Weitemeyer, Stefan; Kleinhans, David; Vogt, Thomas; Agert, Carsten

    2014-12-01

    It is very likely that the European power supply system will be transformed in the next decades to a low carbon system based almost entirely on Renewable Energy Sources (RES). However, due to the natural fluctuations of the most powerful RES (wind and solar energy), it is also very likely that a significant amount of balancing and controllable backup power capacities will be required to ensure a stable grid operation. This implies high additional investments and operating costs. Therefore this work provides an overview of potential options and possibly more cost-effective alternatives to the installation of costly storage capacities, namely grid expansion, demand side management, an optimised mix between different RES as well as the use of overcapacities. Furthermore, the paper provides an approximation of the maximum RES penetration of the German electricity system in the absence of significant storage capacities. Our calculations show that from a numerical perspective on average approximately half of the load can be met by RES if flexible conventional power stations would provide the remaining electricity demand. However, in a 100% RES scenario a significant amount of storage capacities as well as limited overcapacities are required to ensure a reliable electricity supply.

  19. Is direct marketing a risk factor? Inaccurate forecasting of power generation from renewables raises the demand for balancing power; Risikofaktor Direktvermarktung? Durch ungenaue Prognosen bei der Einspeisung von gruenem Strom steigt der Bedarf an Regelleistung

    Energy Technology Data Exchange (ETDEWEB)

    Korn, Stefan

    2012-05-15

    Since the amendment of the EEG in January 2012, enormous amounts of electric power from renewable energy sources are marketed directly, i.e. outside the control of power supply grid owners and operators that formerly sold the electric power in the stock exchange. Inaccurate prognoses made by the direct marketers as well as their marketing strategies have increased the demand for balancing power and made critical situations in the power grid even more difficult.

  20. Moldova Power Sources Development including Nuclear Power Plant possible participation

    Directory of Open Access Journals (Sweden)

    Comendant

    2007-12-01

    Full Text Available For the new power market conditions Moldova power sources development options up to 2030 are evaluated, attempting to propose the best solutions in this respect and the ways they be realized.

  1. Integration of thermoelectrics and photovoltaics as auxiliary power sources in mobile computing applications

    Energy Technology Data Exchange (ETDEWEB)

    Muhtaroglu, Ali; von Jouanne, Annette [School of Electrical Engineering and Computer Science, Oregon State University, Corvallis, OR 97331-5501 (United States); Yokochi, Alex [School of Chemical, Biological and Environmental Engineering, Oregon State University, Corvallis, OR 97331-2702 (United States)

    2008-02-15

    The inclusion of renewable technologies as auxiliary power sources in mobile computing platforms can lead to improved performance such as the extension of battery life. This paper presents sustainable power management characteristics and performance enhancement opportunities in mobile computing systems resulting from the integration of thermoelectric generators and photovoltaic units. Thermoelectric generators are employed for scavenging waste heat from processors or other significant components in the computer's chipset while the integration of photovoltaic units is demonstrated for generating power from environmental illumination. A scalable and flexible power architecture is also verified to effectively integrate these renewable energy sources. This paper confirms that battery life extension can be achieved through the appropriate integration of renewable sources such as thermoelectric and photovoltaic devices. (author)

  2. FUEL CELL MANPACK POWER SOURCE.

    Science.gov (United States)

    battery provides required power density and instantly available power while the fuel cell efficiently converts a primary fuel to electrical power at a...field supply, afford an extremely high energy density making the hybrid fuel cell system competitive on cost per kilowatt hour with standard military zinc-carbon primary batteries. (Author)

  3. Milliwatt isotope power source for microspacecraft

    Science.gov (United States)

    Chmielewski, Arthur B.; Borshchevsky, Alexander; Vining, Cronin B.

    1993-01-01

    Miniature spacecraft offer the potential to greatly reduce mission costs, but today there is no flight qualified power source that could operate a microspacecraft during a journey to the outer planets. This paper describes the Milliwatt Isotope Power Source (MIPS), a concept capable of reliable, long term electrical power generation in the milliwatt range. Utilizing existing Radioisotope Heater Unit (RHU) heat source technology and proven thermoelectric energy conversion module technology, a MIPS package about the size of a D-cell battery could deliver about 30 milliwatts of electrical power for several decades and weigh 70 grams. Such a power source could be used to power miniature instruments such as seismometers, propel a microrover or provide decentralized power aboard a more conventional spacecraft. Also, reliance on flight-qualified heat source technology and the small radioisotope inventory required are attractive safety considerations.

  4. Evaluation of Energy Use in Public Housing in Lagos, Nigeria: Prospects for Renewable Energy Sources

    Directory of Open Access Journals (Sweden)

    Isidore Chukwunweike Ezema

    2016-02-01

    Full Text Available Even though domestic energy can be from either renewable or non-renewable sources, the former is preferred because of its role in reducing both the operational energy intensity and carbon footprint. Given the positive role renewable energy plays in the energy mix, this paper examined the pattern of operational energy use with particular reference to the renewable and non-renewable energy content in medium and high density public residential buildings in Lagos, Nigeria. A survey research method was adopted for primary data collection while data analysis was by descriptive statistics. The study found that renewable energy use in the residential units is very low. In contrast, there was high dependence of the occupants on non-renewable direct fuel combustion through the use of fossil fuel-driven privately-owned electricity generators for electricity supply as a result of the inadequate supply from the national grid. In addition to the relatively high operational energy intensity observed in the studied buildings, the findings have implications for the safety, health and wellbeing of the building occupants as well as for carbon emissions from the buildings and for overall environmental sustainability. Recommendations to increase renewable energy use in new buildings and as retrofits in existing buildings were made. Article History: Received Oct 18, 2015; Received in revised form January 14, 2016; Accepted January 30, 2016; Available online How to Cite This Article: Ezema, I.C., Olotuah, A.O., and Fagbenle, O.I, S. (2016 Evaluation of Energy Use in Public Housing in Lagos, Nigeria: Prospects for Renewable Energy Sources. Int. Journal of Renewable Energy Development, 5(1,15-24. http://dx.doi.org/10.14710/ijred.5.1.15-24 

  5. Selection of Power Sources for Portable Applications

    OpenAIRE

    Flipsen, S.F.J.

    2009-01-01

    New power sources emerge very quickly. Implementation of hybrid power sources for portable electronics depends on the knowledge of industrial designers. For now this group has little understanding of fuel cells and especially fuel-cell hybrids. This slows down implementation and increases the chance of failure. In this paper a review is given of tools and methods which gives concept designers a first guesstimate of the volumes they have to deal with when designing the power source. Second the...

  6. Public utilities with renewable energy sources. Proceedings; Stadtwerke mit Erneuerbaren Energien. Konferenzbeitraege

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2008-07-01

    Within the Second EUROSOLAR Conference of EUROSOLAR, the European Association for Renewable Energy (Bonn, Federal Republic of Germany) between 15th and 16th May, 2008, at the Waterworks Braunschweig (Federal Republic of Germany), the following lectures were held: (1) The municipal public utility: The paradigm shift from power distribution companies to municipal infrastructure provider (C. Jaenig); (2) Public utilities and their concepts (Z. Meszaros); (3) The BS Energy Group (U.Lehmann-Grube); (4) New ways with energy (T. Westerheide); (5) Public utilities and their concepts (R. Edzards); (6) Public utilities with renewable energy (P. Asmuth); (7) Total concept of the public utility Wolfhagen (M. Ruehl); (8) Municipal energy concepts for the expansion of the combined heat and power generation and renewable energies (J. van Bergen); (9) Storage of renewable energy (T. Blank); (10) Public utility as a confident partner of a renewable regional economy (R. Hemmers); (11) The regenerative combined cycle power plant (M. Meyr); (12) The solar power system of systaic (O. Achilles); (13) The concession contract as an instrument for restructuring (J. Schwarz); (14) EEG 2009, GasNZV and EEWaermeG: The changed legal framework as a chance for a restructured power generation (M. Altrock).

  7. Wind farm - A power source in future power systems

    DEFF Research Database (Denmark)

    Chen, Zhe; Blaabjerg, Frede

    2009-01-01

    wind turbines and wind farms, and then introduces the wind power development and wind farms. An optimization platform for designing electrical systems of offshore wind farms is briefed. The major issues related to the grid connection requirements and the operation of wind turbines/farms in power......The paper describes modern wind power systems, introduces the issues of large penetration of wind power into power systems, and discusses the possible methods of making wind turbines/farms act as a power source, like conventional power plants in power systems. Firstly, the paper describes modern...... systems are illustrated....

  8. Evaluating the sustainability of an energy supply system using renewable energy sources: An energy demand assessment of South Carolina

    Science.gov (United States)

    Green, Cedric Fitzgerald

    Sustainable energy is defined as a dynamic harmony between the equitable availability of energy-intensive goods and services to all people and the preservation of the earth for future generations. Sustainable energy development continues to be a major focus within the government and regulatory governing bodies in the electric utility industry. This is as a result of continued demand for electricity and the impact of greenhouse gas emissions from electricity generating plants on the environment by way of the greenhouse effect. A culmination of increasing concerns about climate change, the nuclear incident in Fukushima four years ago, and discussions on energy security in a world with growing energy demand have led to a movement for increasing the share of power generation from renewable energy sources. This work studies demand for electricity from primarily residential, commercial, agricultural, and industrial customers in South Carolina (SC) and its effect on the environment from coal-fired electricity generating plants. Moreover, this work studies sustainable renewable energy source-options based on the renewable resources available in the state of SC, as viable options to supplement generation from coal-fired electricity generating plants. In addition, greenhouse gas emissions and other pollutants from primarily coal-fired plants will be defined and quantified. Fundamental renewable energy source options will be defined and quantified based on availability and sustainability of SC's natural resources. This work studies the environmental, economic, and technical aspects of each renewable energy source as a sustainable energy option to replace power generation from coal-fired plants. Additionally, social aspect implications will be incorporated into each of the three aspects listed above, as these aspects are explored during the research and analysis. Electricity demand data and alternative energy source-supply data in SC are carried out and are used to develop and

  9. Renewable energy power generation projects started construction in Tibet

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    On March 19, the construction of a 10-MW photovoltaic power plant and a 1 000-kW new type geothermal power generation project were started by Guodian Longyuan Group in Yanbajing Town, Dangxiong County of Tibet.

  10. The Analysis of the Usage And Perspectives of Renewable Energy Sources in Lithuania

    Directory of Open Access Journals (Sweden)

    Dominykas Vasarevičius

    2011-08-01

    Full Text Available The paper presents the current situation with the renewable energy sources in Lithuania. An overview of legislation promoting the production and usage of renewable energy in Lithuania is presented. Renewable energy production methods suitable for Lithuanian conditions, their advantages and disadvantages are discussed. It is shown that there is no any promotion from the state for usage of solar energy in private households. The potential of solar energy usage is determined. In order to show the effectiveness of solar thermal energy utilization under similar climatic conditions presented the example of promotion policy model and its results in Poland.Article in Lithuanian

  11. Renewable Power Options for Electrical Generation on Kaua'i: Economics and Performance Modeling

    Energy Technology Data Exchange (ETDEWEB)

    Burman, K.; Keller, J.; Kroposki, B.; Lilienthal, P.; Slaughter, R.; Glassmire, J.

    2011-11-01

    The Hawaii Clean Energy Initiative (HCEI) is working with a team led by the U.S. Department of Energy's (DOE) National Renewable Energy Laboratory (NREL) to assess the economic and technical feasibility of increasing the contribution of renewable energy in Hawaii. This part of the HCEI project focuses on working with Kaua'i Island Utility Cooperative (KIUC) to understand how to integrate higher levels of renewable energy into the electric power system of the island of Kaua'i. NREL partnered with KIUC to perform an economic and technical analysis and discussed how to model PV inverters in the electrical grid.

  12. Colorado's Prospects for Interstate Commerce in Renewable Power

    Energy Technology Data Exchange (ETDEWEB)

    Hurlbut, D. J.

    2009-12-01

    Colorado has more renewable energy potential than it is ever likely to need for its own in-state electricity consumption. Such abundance may suggest an opportunity for the state to sell renewable power elsewhere, but Colorado faces considerable competition from other western states that may have better resources and easier access to key markets on the West Coast. This report examines factors that will be important to the development of interstate commerce for electricity generated from renewable resources. It examines market fundamentals in a regional context, and then looks at the implications for Colorado.

  13. Statistical Modeling of Controllable Heat Pump Water Heaters Considering Customers' Convenience and Uncertainty and its Application to Frequency Control in Power System with a Large Penetration of Renewable Energy Sources

    Science.gov (United States)

    Masuta, Taisuke; Gunjikake, Yasutoshi; Yokoyama, Akihiko; Tada, Yasuyuki

    Nowadays, electric power systems confront many problems, such as environmental issues, aging infrastructures, energy security, and quality of electricity supply. The smart grid is a new concept of a better future grid, which enables us to solve the mentioned problems with Information and Communication Technology (ICT). In this research, a number of Heat Pump Water Heaters (HPWHs), one of the energy efficient-use customer equipment, and Battery Energy Storage System (BESS) are considered as controllable equipment for the frequency control. The utilization of customer equipment such as HPWH for power system control is one of the key elements in the concept of Ubiquitous Power Grid, which was proposed by our research group as a smart grid in Japanese context. The frequency control using a number of HPWHs with thermal storage of hot water tank is evaluated. Moreover, a novel statistical modeling of controllable HPWHs taking into account customers' convenience and uncertainty is proposed.

  14. Elites, power sources and democracy

    OpenAIRE

    Yetkin, Deniz

    2008-01-01

    This thesis is about elites in general, and the acquisition and maintenance of power in particular. The last concern of the thesis is democracy. For this reason, the classical elite theorists’ and the democratic elite theorists’ perceptions of the elite were critically analyzed. Moreover, power for becoming a part of the elites and power of the elites were discussed. In addition to these discussions, ideas of classical and democratic elite theorists about the possibility of democracy under el...

  15. Advanced superconducting power conditioning system with SMES for effective use of renewable energy

    Science.gov (United States)

    Hamajima, T.; Tsuda, M.; Miyagi, D.; Amata, H.; Iwasaki, T.; Son, K.; Atomura, N.; Shintomi, T.; Makida, Y.; Takao, T.; Munakata, K.; Kajiwara, M.

    Since it is an urgent issue to reduce the global Carbon-dioxide in the world, renewable energy should be supplied as a large amount of the electric power. However, if a large amount of fluctuating renewable energy becomes more than adjustable amount of a utility grid capacity, instabilities such as frequency deviation might occur. We propose a system that is composed of SMES and FC-H2-Electrolyzer and also installed adjacent to Liquid Hydrogen station to cool down the SMES. Since the SMES has potentials of quick response and large I/O power, and Fuel Cell has potentials of slow response and steady power supplied from a large amount of hydrogen, we combine both storage devices and apply them to suppress the fluctuating power. We convert the fluctuating power to the constant power by using a developed prediction technology of Kalman filter to predict a trend of the fluctuating power. While the trend power should be supplied by FC or absorbed by the electrolyzer to produce hydrogen, the power difference between the renewable power and the trend power should be stored by the SMES. We simulate the power balance and analyze the required SMES capacity, design the concept of the SMES, and propose an operation algorithm for the SMES to estimate the electric efficiency of the system. It is found that the electric efficiency of the ASPCS can become greater than that of a pumped hydro-machine.

  16. Opportunities for Synergy Between Natural Gas and Renewable Energy in the Electric Power and Transportation Sectors

    Energy Technology Data Exchange (ETDEWEB)

    Lee, A.; Zinaman, O.; Logan, J.

    2012-12-01

    Use of both natural gas and renewable energy has grown significantly in recent years. Both forms of energy have been touted as key elements of a transition to a cleaner and more secure energy future, but much of the current discourse considers each in isolation or concentrates on the competitive impacts of one on the other. This paper attempts, instead, to explore potential synergies of natural gas and renewable energy in the U.S. electric power and transportation sectors.

  17. Chapter 2: International Requirements for Large Integration of Renewable Energy Sources

    Energy Technology Data Exchange (ETDEWEB)

    Molina-Garcia, A.; Hansen, A. D.; Muljadi, Eduard; Gevorgian, Vahan; Fortmann, J.; Gomez-Lazaro, E.

    2017-03-01

    Most European countries have concerns about the integration of large amounts of renewable energy sources (RES) into electric power systems, and this is currently a topic of growing interest. In January 2008, the European Commission published the 2020 package, which proposes committing the European Union to a 20% reduction in greenhouse gas emissions, to achieve a target of deriving 20% of the European Union's final energy consumption from renewable sources, and to achieve 20% improvement in energy efficiency both by the year 2020 [1]. Member states have different individual goals to meet these overall objectives, and they each need to provide a detailed roadmap describing how they will meet these legally binding targets [2]. At this time, RES are an indispensable part of the global energy mix, which has been partially motivated by the continuous increases in hydropower as well as the rapid expansion of wind and solar photovoltaic (PV). The International Energy Agency's 2012 edition of the World Energy Outlook stated that the rapid increases in RES integration are underpinned by falling technology costs as well as rising fossilfuel prices and carbon pricing, but RES integration is also encouraged by continued subsidies: from $88 billion globally in 2011 (compared to $523 billion in fossil-fuel subsidies in 2012 [3], with a share of $131 billion for electricity generation) to an estimated $240 billion in 2035 [4]. According to [3], in 2015 RES accounted for 22% of electricity generation, which was approximately the same level as gas and about one-half the level of coal.

  18. Stochastic simulation of power systems with integrated renewable and utility-scale storage resources

    Science.gov (United States)

    Degeilh, Yannick

    .e., respond to quick variations in the loads and renewable resource outputs in a manner that maintains the power balance, by incorporating appropriate ramping requirement constraints in the formulation of the SOP. The simulation approach makes use of Monte Carlo simulation techniques to represent the impacts of the sources of uncertainty on the side-by-side power system and market operations. As such, we systematically sample the "input'' random processes -- namely the buyer demands, renewable resource outputs and conventional generation resource available capacities -- to generate the realizations, or sample paths, that we use in the emulation of the transmission-constrained day-ahead markets via SOP . As a result, we obtain realizations of the market outcomes and storage resource operations that we can use to approximate their statistics. The approach not only has the capability to emulate the side-by-side power system and energy market operations with the explicit representation of the chronology of time-dependent phenomena -- including storage cycles of charge/discharge -- and constraints imposed by the transmission network in terms of deliverability of the energy, but also to provide the figures of merit for all metrics to assess the economics, reliability and the environmental impacts of the performance of those operations. Our efforts to address the implementational aspects of the methodology so as to ensure computational tractability for large-scale systems over longer periods include relaxing the SOP, the use of a "warm-start'' technique as well as representative simulation periods, parallelization and variance reduction techniques. Our simulation approach is useful in power system planning, operations and investment analysis. There is a broad range of applications of the simulation methodology to resource planning studies, production costing issues, investment analysis, transmission utilization, reliability analysis, environmental assessments, policy formulation and

  19. Dispatchable Renewable Energy Model for Microgrid Power System

    Energy Technology Data Exchange (ETDEWEB)

    Chiou, Fred; Gentle, Jake P.; McJunkin, Timothy R.

    2017-04-01

    Over the years, many research projects have been performed and focused on finding out the effective ways to balance the power demands and supply on the utility grid. The causes of the imbalance could be the increasing demands from the end users, the loss of power generation (generators down), faults on the transmission lines, power tripped due to overload, and weather conditions, etc. An efficient Load Frequency Control (LFC) can assure the desired electricity quality provided to the residential, commercial and industrial end users. A simulation model is built in this project to investigate the contribution of the modeling of dispatchable energy such as solar energy, wind power, hydro power and energy storage to the balance of the microgrid power system. An analysis of simplified feedback control system with proportional, integral, and derivative (PID) controller was performed. The purpose of this research is to investigate a simulation model that achieves certain degree of the resilient control for the microgrid.

  20. Selection of Power Sources for Portable Applications

    NARCIS (Netherlands)

    Flipsen, S.F.J.

    2009-01-01

    New power sources emerge very quickly. Implementation of hybrid power sources for portable electronics depends on the knowledge of industrial designers. For now this group has little understanding of fuel cells and especially fuel-cell hybrids. This slows down implementation and increases the chance

  1. Very High Power THz Radiation Sources

    OpenAIRE

    Carr, G.L.; Martin, M. C.; McKinney, W.R.; Jordan, K.; Neil, G. R.; Williams, G. P.

    2003-01-01

    We report the production of high power (20watts average, ∼ 1 Megawatt peak) broadbandTHz light based on coherent emission fromrelativistic electrons. Such sources areideal for imaging, for high power damagestudies and for studies of non-linearphenomena in this spectral range. Wedescribe the source, presenting theoreticalcalculations and their experimentalverification. For clarity we compare thissource with one based on ultrafast lasertechniques.

  2. Nuclear Power Sources for Space Systems

    Science.gov (United States)

    Kukharkin, N. E.; Ponomarev-Stepnoi, N. N.; Usov, V. A.

    This chapter contains the information about nuclear power sources for space systems. Reactor nuclear sources are considered that use the energy of heavy nuclei fission generated by controlled chain fission reaction, as well as the isotope ones producing heat due to the energy of nuclei radioactive decay. Power of reactor nuclear sources is determined by the rate of heavy nuclei fission that may be controlled within a wide range from the zero up to the nominal one. Thermal power of isotope sources cannot be controlled. It is determined by the type and quantity of isotopes and decreases in time due to their radioactive decay. Both, in the reactor sources and in the isotope ones, nuclear power is converted into the thermal one that may be consumed for the coolant heating to produce thrust (Nuclear Power Propulsion System, NPPS) or may be converted into electricity (Nuclear Power Source, NPS) dynamically (a turbine generator) or statically (thermoelectric or thermionic converters). Electric power is supplied to the airborne equipment or is used to produce thrust in electric (ionic, plasma) low-thrust engines. A brief description is presented of the different nuclear systems with reactor and isotopic power sources implemented in Russia and the USA. The information is also given about isotopic sources for the ground-based application, mainly for navigation systems.

  3. Novel Polymers for High Efficiency Renewable and Portable Power Applications

    Science.gov (United States)

    2015-07-30

    systems with frontier orbital levels (HOMOs and LUMOs) and morphologies systematically investigated and optimized for high efficiency photoelectric and...of polymer-dye covalently linked systems that could efficiently convert light/heat into electrical power. Therefore, frontier orbital matching...force between the polymer and dye would result in weaker PL quenching and optoelectronic device power conversion efficiency , this experimentally

  4. A 100% renewable power system for Europe - Let the weather and physics decide!

    DEFF Research Database (Denmark)

    Greiner, Martin; Heide, Dominik; Rasmussen, Morten Grud

    The design of sustainable energy systems is no longer only the domain of politics, economics and engineering. Mathematical physics is able to contribute with its generic understanding of everything. A new modeling approach is presented and applied to design a fully renewable European power system....... This approach is based on weather data with good spatio-temporal resolution, which is first converted into wind and solar power generation and then used to derive estimates on the optimal mix between the renewable resources and the storage needs.......The design of sustainable energy systems is no longer only the domain of politics, economics and engineering. Mathematical physics is able to contribute with its generic understanding of everything. A new modeling approach is presented and applied to design a fully renewable European power system...

  5. Stability Enhancement of a Power System Containing High-Penetration Intermittent Renewable Generation

    Directory of Open Access Journals (Sweden)

    Jorge Morel

    2015-06-01

    Full Text Available This paper considers the transient stability enhancement of a power system containing large amounts of solar and wind generation in Japan. Following the Fukushima Daiichi nuclear disaster there has been an increasing awareness on the importance of a distributed architecture, based mainly on renewable generation, for the Japanese power system. Also, the targets of CO2 emissions can now be approached without heavily depending on nuclear generation. Large amounts of renewable generation leads to a reduction in the total inertia of the system because renewable generators are connected to the grid by power converters, and transient stability becomes a significant issue. Simulation results show that sodium-sulfur batteries can keep the system in operation and stable after strong transient disturbances, especially for an isolated system. The results also show how the reduction of the inertia in the system can be mitigated by exploiting the kinetic energy of wind turbines.

  6. Stochastic Modeling and Analysis of Power System with Renewable Generation

    DEFF Research Database (Denmark)

    Chen, Peiyuan

    to evaluate year-to-year variation of wind power generation through a sensitivity analysis and to forecast very short-term wind power through a model-based prediction method. The stochastic load model is established on the basis of a seasonal autoregressive moving average (ARMA) process. It is demonstrated...... that such a stochastic model can be used to simulate the effect of load management on the load duration curve. As CHP units are turned on and off by regulating power, CHP generation has discrete output and thus can be modeled by a transition matrix based discrete Markov chain. As the CHP generation has a strong diurnal...... that minimizes the expectation of power losses of a 69-bus distribution system by controlling the power factor of WTs. The optimization is subjected to the probabilistic constraints of bus voltage and line current. The algorithm combines a constrained nonlinear optimization algorithm and a Monte Carlo based PLF...

  7. The renewable energy targets of the Maghreb countries: Impact on electricity supply and conventional power markets

    Energy Technology Data Exchange (ETDEWEB)

    Brand, Bernhard, E-mail: brandb@uni-koeln.de [Institute of Energy Economics at the University of Cologne, Vogelsanger Strasse 321, 50827 Cologne (Germany); Zingerle, Jonas [Institute of Energy Economics at the University of Cologne, Vogelsanger Strasse 321, 50827 Cologne (Germany)

    2011-08-15

    Morocco, Algeria and Tunisia, the three countries of the North African Maghreb region, are showing increased efforts to integrate renewable electricity into their power markets. Like many other countries, they have pronounced renewable energy targets, defining future shares of 'green' electricity in their national generation mixes. The individual national targets are relatively varied, reflecting the different availability of renewable resources in each country, but also the different political ambitions for renewable electricity in the Maghreb states. Open questions remain regarding the targets' economic impact on the power markets. Our article addresses this issue by applying a linear electricity market optimization model to the North African countries. Assuming a competitive, regional electricity market in the Maghreb, the model minimizes dispatch and investment costs and simulates the impact of the renewable energy targets on the conventional generation system until 2025. Special emphasis is put on investment decisions and overall system costs. - Research Highlights: >Market simulation shows impact of RES-E penetration on the conventional power system of Morocco, Algeria and Tunisia. >Noticeable effects on dispatch and investments in fossil power plants. >Reduced utilization of base-load plants - stronger investments in flexible capacities. >Overall system costs can be decreased by optimizing the RES-E goals.

  8. Recent Trends in Renewable Energy Resources for Power Generation in the Republic of Korea

    Directory of Open Access Journals (Sweden)

    Chul-Ho Noh

    2015-10-01

    Full Text Available The global demand for renewable energy in recent decades has continued to increase, despite adverse economic conditions such as world economic recessions, trade disputes, and falls in gas and oil prices. During this period, the United States and Europe have led the development of renewable energy technologies, but now emerging countries such as China, Brazil, India, and the Republic of Korea are also been actively participating in developing and deploying renewable energy. For example, since 1989, the Korea Electric Power Corporation has built a well-known test site for the application of renewable energy resources, including 500 kW photovoltaic systems with smooth integration into power grids in the Gochang area. The main objects of this study are (1 to review the recent trends in renewable energy systems, including solar, wind, bioenergy, hydroelectric, and tidal power, for electric power generation developed in Korea and (2 to introduce the test sites in Korea. For this purpose, this study examines the current activities of industry and government in Korea and compares them with global trends.

  9. Covering of heating load of object by using ground heat as a renewable energy source

    Directory of Open Access Journals (Sweden)

    Čenejac Aleksandra R.

    2012-01-01

    Full Text Available Rational use of energy, improving energy performance of buildings and use of renewable energy sources are the most important measures for reducing consumption of non-renewable primary energy (solid, liquid, and gaseous fuels, environmental protection and for the future sustainable development of mankind. In the total primary energy consumption great part is related to building industry, for heating spaces in which people stay and live. Renewable energy sources (RES present natural resources and they are one of the alternatives that allow obtaining heat for heating buildings, and by that they provide a significant contribution to the energy balance of a country. This paper analyzes the participation of ground source as RES, when the vertical (the probe in the ground and horizontal (registry in the ground heat exchangers are used for covering heating load of the building.

  10. GIS to support cost-effective decisions on renewable sources applications for low temperature geothermal energy

    CERN Document Server

    Gemelli, Alberto; Diamantini, Claudia; Longhi, Sauro

    2013-01-01

    Through the results of a developed case study of information system for low temperature geothermal energy, GIS to Support Cost-effective Decisions on Renewable Sources addresses the issue of the use of Geographic Information Systems (GIS) in evaluating cost-effectiveness of renewable resource exploitation regional scale. Focusing on the design of a Decision Support System, a process is presented aimed to transform geographic data into knowledge useful for analysis and decision-making on the economic exploitation of geothermal energy. This detailed description includes a literature review and technical issues related to data collection, data mining, decision analysis for the informative system developed for the case study. A multi-disciplinary approach to GIS design is presented which is also an innovative example of fusion of georeferenced data acquired from multiple sources including remote sensing, networks of sensors and socio-economic censuses. GIS to Support Cost-effective Decisions on Renewable Sources ...

  11. Waste-to-energy: A way from renewable energy sources to sustainable development

    Energy Technology Data Exchange (ETDEWEB)

    Kothari, Richa [Babasaheb BhimRao Ambedkar University, Lucknow, U.P. (India); Tyagi, V.V.; Pathak, Ashish [Centre for Energy Studies, Indian Institute of Technology Delhi, 110016 (India)

    2010-12-15

    Nowadays, energy is key consideration in discussions of sustainable development. So, sustainable development requires a sustainable supply of clean and affordable renewable energy sources that do not cause negative societal impacts. Energy sources such as solar radiation, the winds, waves and tides are generally considered renewable and, therefore, sustainable over the relatively long term. Wastes and biomass fuels are usually viewed as sustainable energy sources. Wastes are convertible to useful energy forms like hydrogen (biohydrogen), biogas, bioalcohol, etc., through waste-to-energy technologies. In this article, possible future energy utilization patterns and related environmental impacts, potential solutions to current environmental problems and renewable energy technologies and their relation to sustainable development are discussed with great emphasis on waste-to-energy routes (WTERs). (author)

  12. Renewable energy sources: resistance to change; Energies renouvelables: les resistances au changement

    Energy Technology Data Exchange (ETDEWEB)

    Dubreuil, Th.; Audrain-Demey, G.; Attal, J.Ph.; Lormeteau, B. [Nantes Univ., Droit de l' Environnement et du Developpement Durable, 44 (France)

    2011-10-15

    This paper is the summary of a conference day organised by the students of the 'environment and sustainable development law' Master of Nantes university (France). This interdisciplinary meeting brought together professionals of renewable energy industries who could testify about the resistance of both politicians and the public opinion against the energy transition towards renewable sources. Legal, political, sociological and cultural considerations are put forward to explain this resistance. The French specificity, with an over-representation of nuclear energy, a constraining legal framework for renewable energies, a regional opposition to renewable energy projects (NIMBY syndrome), and a lack of trust in the political class and in its representatives are as many factors that have contributed to build this French 'cultural exception'. (J.S.)

  13. Materials for power sources to meet military requirements

    Energy Technology Data Exchange (ETDEWEB)

    Andrukaitis, E. [Defence Research and Development Canada, Ottawa, ON (Canada)

    2005-07-01

    Power source requirements for the military were presented to provide guidelines for research and development planning. Power sources that contain a high amount of energy and are small, light and durable are a common request from military users. Safety, reliability and low temperature performance are also important factors in the selection of power sources, as are cost and energy efficiency. Issues concerning advanced batteries were reviewed with reference to high energy density cathode materials. Various thermoelectric and renewable energy materials were discussed, with reference to recovery and conversion of waste heat. It was suggested that photovoltaic devices could help revolutionize military logistics by modifying energy re-supply requirements. Solid Oxide Fuel Cells (SOFC) were considered in relation to the high price of the ceramic materials required for operation. It was noted that the development of SOFC anodes capable of generating hydrogen from liquid fuels such as methanol or ethanol is an important area for the military, as lower temperature operation reduces the heat signature of the power source. It was suggested that the high power demands of the military require energy sources that exceed the capabilities of batteries currently being fielded for portable applications. It was noted that Proton Exchange Membrane (PEM) fuel cells are efficient, tactical energy converters. Future military applications for PEM fuel cells could include unmanned undersea vehicles and unmanned air vehicles, or as auxiliary power applications for light armoured vehicles. An overview of hydrogen production from renewable sources technologies was presented, as well as issues concerning the reforming of hydrocarbon fuels. It was concluded that while there are several technological hurdles to be overcome before fuel cells are widely used in either the civilian or military sectors, they offer several attractive features. They are efficient and offer the potential for very high

  14. Renewables in future power systems implications of technological learning and uncertainty

    CERN Document Server

    Wagner, Fabian

    2014-01-01

    The book examines the future deployment of renewable power from a normative point of view. It identifies properties characterizing the cost-optimal transition towards a renewable power system and analyzes the key drivers behind this transition. Among those drivers, particular attention is paid to technological cost reductions and the implications of uncertainty. From a methodological perspective, the main contributions of this book relate to the field of endogenous learning and uncertainty in optimizing energy system models. The primary objective here is closing the gap between the strand of l

  15. Environmental Standard Review Plan for the review of license renewal applications for nuclear power plants

    Energy Technology Data Exchange (ETDEWEB)

    O' Brien, J.; Kim, T.J.; Reynolds, S.

    1991-08-01

    The Environmental Standard Review Plan for the Review of License Applications for Nuclear Power Plants (ESRP-LR) is to be used by the NRC staff when performing environmental reviews of applications for the renewal of power reactor licenses. The use of the ESRP-LR provides a framework for the staff to determine whether or not environmental issues important to license renewal have been identified and the impacts evaluated and provides acceptance standards to help the reviewers comply with the National Environmental Policy Act.

  16. A 100% renewable power system for Europe - Let the weather and physics decide!

    DEFF Research Database (Denmark)

    Greiner, Martin; Heide, Dominik; Rasmussen, Morten Grud;

    The design of sustainable energy systems is no longer only the domain of politics, economics and engineering. Mathematical physics is able to contribute with its generic understanding of everything. A new modeling approach is presented and applied to design a fully renewable European power system....... This approach is based on weather data with good spatio-temporal resolution, which is first converted into wind and solar power generation and then used to derive estimates on the optimal mix between the renewable resources and the storage needs....

  17. Renewable Energy Based Floating Power Generator (Rivers and Canals

    Directory of Open Access Journals (Sweden)

    Dr. J.R.Gandhi

    2016-02-01

    Full Text Available We have developed a stand alone, (river and canal water stream floating power generator system for village electrification, agriculture water pumping, bridge street lights and such other utilities. The system is the unique one of its kind as per our knowledge and various surveys. The physical structure of the system is made of the non corrosive and unbreakable materials like mild steel, fiber glass etc. It works, as it rotates in the water flow. It does not require any kind of the external electric grid power for its working. As the water flows, the specially designed blades of the system rotate in the direction of the flow and ultimately the consistent power is generated, this power can be used directly or it may be stored in battery and the utilized as and when required. No permanent installation, No pollution and environment friendly floating Pico turbine. The observations taken from the sight are tabulated and accordingly results are discussed.

  18. Power electronic converter systems for direct drive renewable energy applications

    DEFF Research Database (Denmark)

    Chen, Zhe

    2013-01-01

    This chapter presents power electronic conversion systems for wind and marine energy generation applications, in particular, direct drive generator energy conversion systems. Various topologies are presented and system design optimization and reliability are briefly discussed....

  19. Electrical Supply System for the Experimental Zero-Energy Building (of 300 m2 Based on Renewable and Alternative Energy Sources

    Directory of Open Access Journals (Sweden)

    Basok, B.I.

    2015-11-01

    Full Text Available The results of the development and implementation of the power supply system of the experimental zero-energy building based on renewable and alternative energy sources are presented. CDF-model to determine the optimal conditions for the deployment of wind energy installations within the building limits is developed.

  20. Low Power Polysilicon Sources for IR Applications

    Science.gov (United States)

    Das, N. C.; Jhabvala, M.; Shu, P.

    1998-01-01

    We have designed and fabricated polysilicon thin film infrared (IR) sources by micromachining technology. These sources are made with a lightly doped middle region for light emission and heavy doping of the supporting legs. The sources are fabricated on a 10 mm thick, low temperature process parameters in the fabrication of these silicon dioxide layer. Different doping levels were used to achieve various source resistances. From the power requirement to reach the required light emission versus source resistance curve it is seen that there exists a resistance value which minimizes the necessary input power.

  1. SIMULATION OF THE SYSTEMS WITH RENEWABLE ENERGY SOURCES USING HOMER SOFTWARE

    Directory of Open Access Journals (Sweden)

    FIRINCĂ S.D.

    2015-06-01

    Full Text Available This paper simulates by using the Homer software, a distributed energy system with capacity below 1 MW. Among the renewable energy sources are used wind and solar energy. For photovoltaic panels, we are considering two situations: fixed panels, oriented at 45° and panels with tracking system with two axis. Simulation results contain information regarding operation hours of the system throughout the year, energy produced from the renewable energy sources, energy consumption for the load, and excess of electrical energy. The Homer software also allows an economic analysis of these systems.

  2. SIMULATION OF THE SYSTEMS WITH RENEWABLE ENERGY SOURCES USING HOMER SOFTWARE

    Directory of Open Access Journals (Sweden)

    FIRINCĂ S.D.

    2015-12-01

    Full Text Available This paper simulates by using the Homer software, distributed energy systems with capacity below 1 MW. Among the renewable energy sources are used wind and solar energy. For photovoltaic panels, we are considering two situations: fixed panels, oriented at 45 ° and panels with tracking system with two axis. Simulation results contain information regarding operation hours of the system throughout the year, energy produced from the renewable energy sources, energy consumption for the load, and excess of electrical energy. The Homer software also allows an economic analysis of these systems.

  3. Summary for Policy Makers: Intergovernmental Panel on Climate Change Special Report Renewable Energy Sources (SRREN)

    Energy Technology Data Exchange (ETDEWEB)

    Arvizu, Dan; Bruckner, Thomas; Christensen, John; Devernay, Jean-Michel; Faaij , Andre; Fischedick, Manfred; Goldstein, Barry; Hansen, Gerrit; Huckerby , John; Jager-Waldau, Arnulf; Kadner, Susanne; Kammen, Daniel; Krey, Volker; Kumar, Arun; Lewis , Anthony; Lucon, Oswaldo; Matschoss, Patrick; Maurice, Lourdes; Mitchell , Catherine; Moomaw, William; Moreira, Jose; Nadai, Alain; Nilsson, Lars J.; Nyboer, John; Rahman, Atiq; Sathaye, Jayant; Sawin, Janet; Schaeffer, Roberto; Schei, Tormod; Schlomer, Steffen; Sims, Ralph; von Stechow, Christoph; Verbruggen, Aviel; Urama, Kevin; Wiser, Ryan; Yamba, Francis; Zwickel, Timm

    2011-05-08

    The Working Group III Special Report on Renewable Energy Sources and Climate Change Mitigation (SRREN) presents an assessment of the literature on the scientific, technological, environmental, economic and social aspects of the contribution of six renewable energy (RE) sources to the mitigation of climate change. It is intended to provide policy relevant information to governments, intergovernmental processes and other interested parties. This Summary for Policymakers provides an overview of the SRREN, summarizing the essential findings. The SRREN consists of 11 chapters. Chapter 1 sets the context for RE and climate change; Chapters 2 through 7 provide information on six RE technologies, and Chapters 8 through 11 address integrative issues.

  4. People’s Perceptions on Renewable Energy Sources Penetration Prospects in the Khorezm Province, Uzbekistan

    Directory of Open Access Journals (Sweden)

    Bahtiyor R. ESHCHANOV

    2011-12-01

    Full Text Available The energy sectors of fossil fuel-rich Kazakhstan, Turkmenistan and Uzbekistan are heavily dependent on non-renewable resources. The abundance of these resources acts as a retardant the process of energy diversification in the above mentioned Central Asian states. Nevertheless, the future diversification of energy sources is an inevitable process due to many reasons; man-made climate change, the need for transition to reliable and secure energy sources and availability of a vast potential for renewable energy generation being the most important ones.

  5. Renewable energy sources. European Commission papers; Energies renouvelables. Documents de la Commission Europeenne

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-05-01

    The ''Directive on the Promotion of Electricity from Renewable Sources of Energy in the Internal Electricity Market'' was adopted in September 2001. Its purpose is to promote an increase in the contribution of renewable energy sources to electricity production in the internal market for electricity and to create a basis for a future Community framework. Energie-Cites provides in this document a summary of its opinion on the Green Paper and on Alterner II and gives a proposal for an Action Plan concerning the White Paper. (A.L.B.)

  6. Renewable energy sources - an option for the future. Federal Government voices opinion

    Energy Technology Data Exchange (ETDEWEB)

    1988-08-31

    Despite unfavourable market conditions, the Federal Government wants to continue the research and development of renewable energy sources up to the 'threshold of market maturity' and - wherever practical - increase them. A 'technological gap' should be avoided. However, the current lack of economy of these forms of energy cannot be compensated for by permanent subsidies. This information is contained in the Federal Government's reply to a parliamentary question from the coalition parties of the CDU/CSU and FDP on the subject of 'Production and use of renewable energy sources in the Federal Republic of Germany'.

  7. An integrated system for the energy production and accumulation from renewable sources: a rural tower prototype

    Science.gov (United States)

    Di Francesco, Silvia; Petrozzi, Alessandro; Montesarchio, Valeria

    2014-05-01

    This research work presents the implementation of an architectural prototype aiming at the complete energy self-sufficiency through an integrated system based on renewable energy. It is suitable for historical buildings in rural areas, isolated but important from natural and architectonical point of view. In addition to the energy aspects, it is important to protect the impact in terms of land-use and environment. This idea is also especially powerful because in the rural countries there are many little building centers abandoned because they are devoid of a connection to the electric energy grid and methane piping. Thus, taking inspiration from dove towers, architectural typology widespread in central Italy, a virtual model has been developed as an integrated system for renewable energy production, storage and supply. While recovering the ancient tower, it is possible to design and assembly an integrated intelligent system, able to combine energy supply and demand: a new tower that should be flexible, efficient and replicable in other contexts as manufacturing, commercial and residential ones. The prototype has been applied to a real case of study, an ancient complex located in Umbria Region. The sources for electric production installed on the tower are photovoltaics, on the head and shaft of the tower, hydropower and a biomass gasifier providing thermal too. A tank at the head of the tower allows an available hydraulic potential energy, for the turbine at any time, to cover photovoltaic lacks, caused by sudden loss of production, for environmental causes. Conversely, photovoltaic peaks, otherwise unusable, can be used to reload the water from the receiving tank at the foot of the tower, up to the tank in the head. The same underground tank acts as a thermal flywheel to optimize the geothermal heat pumps for the heat and cold production. Keywords: hydropower, photovoltaics, dove tower.

  8. Transmission grid requirements with scattered and flutuating renewable electricity sources

    DEFF Research Database (Denmark)

    Østergaard, Poul Alberg

    2002-01-01

    Denmark is in a situation with many scattered sources of electricity, that are not controlled by the central load dispatch. At the same time, Denmark is being used as an electricity transit corridor between Norway/Sweden and Germany. Through energy systems analyses and load-flow analyses, it is d......Denmark is in a situation with many scattered sources of electricity, that are not controlled by the central load dispatch. At the same time, Denmark is being used as an electricity transit corridor between Norway/Sweden and Germany. Through energy systems analyses and load-flow analyses...

  9. The Environment Friendly Power Source for Power Supply of Mobile Communication Base Stations

    Science.gov (United States)

    Rudenko, N. V.; Ershov, V. V.; Evstafiev, V. V.

    2017-05-01

    The article describes the technical proposals to improve environmental and resource characteristics of the autonomous power supply systems of mobile communication base stations based on renewable energy sources, while ensuring the required reliability and security of power supply. These include: the replacement of diesel-generator with clean energy source - an electrochemical generator based on hydrogen fuel cells; the use of wind turbines with a vertical axis; use of specialized batteries. Based on the analysis of the know technical solutions, the structural circuit diagram of the hybrid solar-wind-hydrogen power plant and the basic principles of the algorithm of its work were proposed. The implementation of these proposals will improve the environmental and resource characteristics.

  10. Bio-, recycling- and waste fuels. How does the transition to renewable energy-sources affect the Swedish power and heat preparedness; Bio-, retur- och avfallsbraenslen. Hur oevergaangen till foernybara energikaellor paaverkar Sveriges el- och vaermeberedskap

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-02-01

    The total energy supply in Sweden amounted to 600 TWh in 2000. Close to 100 TWh of these were Bio-, recycling- and waste-fuels (BRW), which means that the use of these fuels has tripled during the last decade. BRW stand for half the energy supply to district heating in Sweden. A large number of heat and power plants built for fossil fuels have been converted to BRW, and several new plants designed for biofuels have been taken into operation. Upgraded biofuels (briquets, pellets and powders) have substituted fuel oil in households and small heating networks. These developments make it important to study issues about safety of supply and emergency planning. In difference to fossil fuels there is no obligation to set up emergency stocks of BRW in Sweden. In combination with an increased dependence on logistics this means that the preparedness in short time emergency situations has deteriorated. For short periods, fuel oil and coal can however be used as replacement fuels. The increased know-how on producing, handling, transport and combustion of BRW is, on the other hand, a great asset for Sweden both in normal and emergency situations.

  11. Transmission grid requirements with scattered and flutuating renewable electricity sources

    DEFF Research Database (Denmark)

    Østergaard, Poul Alberg

    2002-01-01

    Denmark is in a situation with many scattered sources of electricity, that are not controlled by the central load dispatch. At the same time, Denmark is being used as an electricity transit corridor between Norway/Sweden and Germany. Through energy systems analyses and load-flow analyses, it is d...

  12. Power sources compared: The ultimate truth-

    Energy Technology Data Exchange (ETDEWEB)

    Flipsen, S.F.J. [Delft University of Technology, Faculty of Industrial Design Engineering, Landbergstraat 15, 2628 CE Delft (Netherlands)

    2006-11-22

    Especially, during the last decade the demand for portable power is steadily rising due to the increasing wireless products integrated in our day-to-day lives (cellular phone, personal digital assistant (PDA) and of course the remote control for your television set or VCR). These portable consumer electronics are mainly powered by alkaline batteries, and nowadays more and more by rechargeables. Alternative power sources, like fuel cells and photovoltaic cells, can be used in portable consumer electronics, possibly making them more cost-effective, more environmentally and user friendly. For the consumer industry, the opportunities of these other alternative power sources is unknown, and designers are not known with the state-of-the-art of the technology. Opportunities for short-term but especially long-term developments in portable electronics are in that way overlooked. In this paper, the most interesting power sources available will be compared on the basis of power and energy characteristics, and costs. Emerging power sources like fuel cells are a very interesting alternative for the lithium-ion battery, but the road ahead for it is still long when we look at state-of-the-art developments. Other power sources described and compared are: ether-smog, human power, thermo-electric generators, piezo generators, electro-mechanical devices, photovoltaic cells, micro-fuel cells and micro-combustion engines. (author)

  13. Power conversion from environmentally scavenged energy sources.

    Energy Technology Data Exchange (ETDEWEB)

    Druxman, Lee Daniel

    2007-09-01

    As the power requirements for modern electronics continue to decrease, many devices which were once dependent on wired power are now being implemented as portable devices operating from self-contained power sources. The most prominent source of portable power is the electrochemical battery, which converts chemical energy into electricity. However, long lasting batteries require large amounts of space for chemical storage, and inevitably require replacement when the chemical reaction no longer takes place. There are many transducers and scavenging energy sources (SES) that are able to exploit their environment to generate low levels of electrical power over a long-term time period, including photovoltaic cells, thermoelectric generators, thermionic generators, and kinetic/piezoelectric power generators. This generated power is sustainable as long as specific environmental conditions exist and also does not require the large volume of a long lifetime battery. In addition to the required voltage generation, stable power conversion requires excess energy to be efficiently stored in an ultracapacitor or similar device and monitoring control algorithms to be implemented, while computer modeling and simulation can be used to complement experimental testing. However, building an efficient and stable power source scavenged from a varying input source is challenging.

  14. Hydrogen and renewable energy sources integrated system for greenhouse heating

    Directory of Open Access Journals (Sweden)

    Ileana Blanco

    2013-09-01

    Full Text Available A research is under development at the Department of Agro- Environmental Sciences of the University of Bari “Aldo Moro” in order to investigate the suitable solutions of a power system based on solar energy (photovoltaic and hydrogen, integrated with a geothermal heat pump for powering a self sustained heated greenhouse. The electrical energy for heat pump operation is provided by a purpose-built array of solar photovoltaic modules, which supplies also a water electrolyser system controlled by embedded pc; the generated dry hydrogen gas is conserved in suitable pressured storage tank. The hydrogen is used to produce electricity in a fuel cell in order to meet the above mentioned heat pump power demand when the photovoltaic system is inactive during winter night-time or the solar radiation level is insufficient to meet the electrical demand. The present work reports some theoretical and observed data about the electrolyzer operation. Indeed the electrolyzer has required particular attention because during the experimental tests it did not show a stable operation and it was registered a performance not properly consistent with the predicted performance by means of the theoretical study.

  15. Message passing for integrating and assessing renewable generation in a redundant power grid

    Energy Technology Data Exchange (ETDEWEB)

    Zdeborova, Lenka [Los Alamos National Laboratory; Backhaus, Scott [Los Alamos National Laboratory; Chertkov, Michael [Los Alamos National Laboratory

    2009-01-01

    A simplified model of a redundant power grid is used to study integration of fluctuating renewable generation. The grid consists of large number of generator and consumer nodes. The net power consumption is determined by the difference between the gross consumption and the level of renewable generation. The gross consumption is drawn from a narrow distribution representing the predictability of aggregated loads, and we consider two different distributions representing wind and solar resources. Each generator is connected to D consumers, and redundancy is built in by connecting R {le} D of these consumers to other generators. The lines are switchable so that at any instance each consumer is connected to a single generator. We explore the capacity of the renewable generation by determining the level of 'firm' generation capacity that can be displaced for different levels of redundancy R. We also develop message-passing control algorithm for finding switch sellings where no generator is overloaded.

  16. Message passing for integrating and assessing renewable generation in a redundant power grid

    Energy Technology Data Exchange (ETDEWEB)

    Zdeborova, Lenka [Los Alamos National Laboratory; Backhaus, Scott [Los Alamos National Laboratory; Chertkov, Michael [Los Alamos National Laboratory

    2009-01-01

    A simplified model of a redundant power grid is used to study integration of fluctuating renewable generation. The grid consists of large number of generator and consumer nodes. The net power consumption is determined by the difference between the gross consumption and the level of renewable generation. The gross consumption is drawn from a narrow distribution representing the predictability of aggregated loads, and we consider two different distributions representing wind and solar resources. Each generator is connected to D consumers, and redundancy is built in by connecting R {le} D of these consumers to other generators. The lines are switchable so that at any instance each consumer is connected to a single generator. We explore the capacity of the renewable generation by determining the level of 'firm' generation capacity that can be displaced for different levels of redundancy R. We also develop message-passing control algorithm for finding switch sellings where no generator is overloaded.

  17. Renewables Deals. Mergers and acquisitions activity in renewable power and related clean technology. 2012 outlook and 2011 review

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2012-01-15

    Renewables Deals is our annual analysis of deal activity in the renewable power and related clean technology sectors. We publish our outlook on the prospects for dealmaking in the year ahead. We also take a look at what's been happening in the last 12 months and in the different main markets around the world. This year for the first time, we open our report with our discussion of the outlook for the year ahead and identify some of the main themes we expect to be at work. Looking ahead, the sector is undergoing a growing maturity and consolidation phase. This evolution inclines us to believe that deal flow will remain significant in 2012. In part, though, this will depend on how the Eurozone crisis unfolds. We assume a continuation of a 'rolling uncertainty' scenario affecting the Eurozone and wider world sentiment. But, if there are significant adverse events that turn Eurozone 'rolling uncertainty' into deeper crisis, deal flow is likely to be dampened.

  18. An adaptive Phase-Locked Loop algorithm for faster fault ride through performance of interconnected renewable energy sources

    DEFF Research Database (Denmark)

    Hadjidemetriou, Lenos; Kyriakides, Elias; Blaabjerg, Frede

    2013-01-01

    of the phase-locked loop algorithm. The adaptive parameters are adjusted in real time according to the proposed fault classification unit, which permits a fast estimation of the type of the grid fault. The outstanding performance of the proposed adaptive PLL is verified through simulation and experimental......Interconnected renewable energy sources require fast and accurate fault ride through operation in order to support the power grid when faults occur. This paper proposes an adaptive Phase-Locked Loop (adaptive dαβPLL) algorithm, which can be used for a faster and more accurate response of the grid...

  19. A Game Theoretical Approach Based Bidding Strategy Optimization for Power Producers in Power Markets with Renewable Electricity

    Directory of Open Access Journals (Sweden)

    Yi Tang

    2017-05-01

    Full Text Available In a competitive electricity market with substantial involvement of renewable electricity, maximizing profits by optimizing bidding strategies is crucial to different power producers including conventional power plants and renewable ones. This paper proposes a game-theoretic bidding optimization method based on bi-level programming, where power producers are at the upper level and utility companies are at the lower level. The competition among the multiple power producers is formulated as a non-cooperative game in which bidding curves are their strategies, while uniform clearing pricing is considered for utility companies represented by an independent system operator. Consequently, based on the formulated game model, the bidding strategies for power producers are optimized for the day-ahead market and the intraday market with considering the properties of renewable energy; and the clearing pricing for the utility companies, with respect to the power quantity from different power producers, is optimized simultaneously. Furthermore, a distributed algorithm is provided to search the solution of the generalized Nash equilibrium. Finally, simulation results were performed and discussed to verify the feasibility and effectiveness of the proposed non-cooperative game-based bi-level optimization approach.

  20. Dynamic droop scheme considering effect of intermittent renewable energy source

    DEFF Research Database (Denmark)

    Wang, Yanbo; Chen, Zhe; Deng, Fujin

    2016-01-01

    generator are calculated in different wind speed and insolation ranges. Then, piecewise droop relationships between distributed generators are built. Finally, the dynamic droop control is proposed to perform power sharing according to wind speed and sunlight information from local sensors. The dynamic droop...... controller of each DG unit is activated through local logic variable inferred by wind speed and solar insolation information. Simulation results are given for validating the droop control scheme. The proposed dynamic droop scheme preserves the advantage of conventional droop control method, and provides...

  1. Geometry of power flows and convex-relaxed power flows in distribution networks with high penetration of renewables

    DEFF Research Database (Denmark)

    Huang, Shaojun; Wu, Qiuwei; Zhao, Haoran

    2016-01-01

    Renewable energies are increasingly integrated in electric distribution networks and will cause severe overvoltage issues. Smart grid technologies make it possible to use coordinated control to mitigate the overvoltage issues and the optimal power flow (OPF) method is proven to be efficient in th...... profile of the feasible sub-injection (injection of nodes excluding the root/substation node) region...

  2. Nevada Renewable Energy Training Project: Geothermal Power Plant Operators

    Energy Technology Data Exchange (ETDEWEB)

    Jim, Nichols [Truckee Meadows Community College, Reno, NV (United States)

    2014-04-29

    The purpose of this project was to develop and institute a training program for certified geothermal power plant operators (GPO). An advisory board consisting of subject matter experts from the geothermal energy industry and academia identified the critical skill sets required for this profession. A 34-credit Certificate of Achievement (COA), Geothermal Power Plant Operator, was developed using eight existing courses and developing five new courses. Approval from the Nevada System of Higher Education Board of Regents was obtained. A 2,400 sq. ft. geothermal/fluid mechanics laboratory and a 3,000 sq. ft. outdoor demonstration laboratory were constructed for hands-on training. Students also participated in field trips to geothermal power plants in the region. The majority of students were able to complete the program in 2-3 semesters, depending on their level of math proficiency. Additionally the COA allowed students to continue to an Associate of Applied Science (AAS), Energy Technologies with an emphasis in Geothermal Energy (26 additional credits), if they desired. The COA and AAS are stackable degrees, which provide students with an ongoing career pathway. Articulation agreements with other NSHE institutions provide students with additional opportunities to pursue a Bachelor of Applied Science in Management or Instrumentation. Job placement for COA graduates has been excellent.

  3. Portable thermo-photovoltaic power source

    Science.gov (United States)

    Zuppero, Anthony C.; Krawetz, Barton; Barklund, C. Rodger; Seifert, Gary D.

    1997-01-14

    A miniature thermo-photovoltaic (TPV) device for generation of electrical power for use in portable electronic devices. A TPV power source is constructed to provide a heat source chemical reactor capable of using various fuels, such as liquid hydrocarbons, including but not limited to propane, LPG, butane, alcohols, oils and diesel fuels to generate a source of photons. A reflector dish guides misdirected photon energy from the photon source toward a photovoltaic array. A thin transparent protector sheet is disposed between the photon source and the array to reflect back thermal energy that cannot be converted to electricity, and protect the array from thermal damage. A microlens disposed between the protector sheet and the array further focuses the tailored band of photon energy from the photon source onto an array of photovoltaic cells, whereby the photon energy is converted to electrical power. A heat recuperator removes thermal energy from reactor chamber exhaust gases, preferably using mini- or micro-bellows to force air and fuel past the exhaust gases, and uses the energy to preheat the fuel and oxidant before it reaches the reactor, increasing system efficiency. Mini- or micro-bellows force ambient air through the system both to supply oxidant and to provide cooling. Finally, an insulator, which is preferably a super insulator, is disposed around the TPV power source to reduce fuel consumption, and to keep the TPV power source cool to the touch so it can be used in hand-held devices.

  4. Redesign Electricity Market for the Next Generation Power System of Renewable Energy and Distributed Storage Technologies

    DEFF Research Database (Denmark)

    Feng, Donghan; Xu, Zhao; Østergaard, Jacob

    2010-01-01

    This paper proposes a stochastic time-series based method to simulate the volatility of intermittent renewable generation and distributed storage devices along timeline. The proposed method can calculate the optimal timeline for different electricity markets and power systems. In practice...

  5. Design and Modeling of Grid Connected Hybrid Renewable Energy Power Generation

    Directory of Open Access Journals (Sweden)

    M. Kishore Reddy,

    2014-09-01

    Full Text Available This paper proposes a design and modeling of grid connected hybrid renewable energy power generation. The energy system having a photo voltaic (PV panel, Srg wind turbine and fuel cell (sofc for continuous power flow management. Fuel cells (storage & generating are added to ensure uninterrupted power supply due to the discontinuous nature of solar and wind resources. Renewable energy generated during times of plenty can be stored for use during periods when sufficient electricity is not available. But storing this energy is a difficult task: batteries and similar technologies perform well over short timescales, but over periods of weeks or months a different approach is necessary. Energy storage in the form of hydrogen is one such possibility: excess electricity is fed into an electrolyser to split water into its constituent parts, oxygen and hydrogen. The hydrogen is then used in fuel cells to produce electricity when needed which will overcome the problem of storage. This work is mainly concentrated on the design, analysis and modelling of Fuel cells and Analysis and modelling of Switched Reluctance Generator (SRG in the application of Wind Energy Generation and pv cell. Also an effective approach is proposed in this thesis to ensure renewable energy diversity and effective utilization. The pv cell, wind and fuel cell renewable energy system is digitally simulated using the MATLAB/SIMULINK software environment and fully validated for efficient energy utilizations and enhanced interface power quality under different operating conditions and load excursions

  6. Integration of Renewable Energy for the Harmonic Current and Reactive Power Compensation

    DEFF Research Database (Denmark)

    Pouresmaeil, Edris; Shaker, Hamid Reza; Mehrasa, Majid;

    2015-01-01

    This paper deals with a control technique for multilevel converter topologies base on Direct Lyapunov Control Method (DLCM) for integration of Renewable Energy Resources (RER) into the power grid. The compensation of variations in reference current components is considered properly in this control...

  7. 75 FR 76055 - Nebraska Public Power District Cooper Nuclear Station; Notice of Issuance of Renewed Facility...

    Science.gov (United States)

    2010-12-07

    ... From the Federal Register Online via the Government Publishing Office NUCLEAR REGULATORY COMMISSION Docket No. 50-298; NRC-2008-0617] Nebraska Public Power District Cooper Nuclear Station; Notice of... operator of the Cooper Nuclear Station (CNS). Renewed facility operating license No. DPR-46...

  8. Experimental investigation of jojoba as a renewable energy source

    Energy Technology Data Exchange (ETDEWEB)

    Al-Widyan, Mohamad I. [Mechanical Engineering Department, Jordan University of Science and Technology, PO Box 3030, Irbid 22110 (Jordan); Al-Muhtaseb, Mu' taz A. [Mechanical Engineering Department, Faculty of Engineering, University of Jordan, PO Box 961060, Amman 11196 (Jordan)

    2010-08-15

    This work examined jojoba (oil and cake) as possible alternative fuel sources. Jojoba is a shrub that grows very well in deserts and its cake is the solid part produced upon processing of the jojoba seeds for oil extraction. In this study, pure jojoba oil and 50/50 blends with diesel fuel were tested as fuels in a single cylinder diesel engine. The diesel fuel was the baseline of comparison throughout the runs. The cake was tested for both direct combustion (pellets) and as a substrate for biogas production. The pellets were formed by compacting the cake in cylindrical dies using a hydraulic press while the biogasification was conducted in an anaerobic digester model Bioflo 110 from Brunswick. The findings indicate that the optimum injection pressure for jojoba oil in the engine is 210 bars at which engine speed was maximum (2700 rpm), NO{sub x} and CO emissions as well as exhaust temperature were minimum. Using jojoba cake for biogasification resulted in a yield of about 600 ml biogas per 400 g of jojoba cake. Burning jojoba compacted cake (pellets) for direct combustion in a stove indicated that jojoba cake sustained a temperature in excess of 300 C for a reasonable amount of time and that the cake was very competitive to wood and has energy content more than most types of wood. Overall, it may be stated that both jojoba oil and cake hold real promise as alternative energy sources. (author)

  9. A review of renewable energy sources, sustainability issues and climate change mitigation

    Directory of Open Access Journals (Sweden)

    Phebe Asantewaa Owusu

    2016-12-01

    Full Text Available The world is fast becoming a global village due to the increasing daily requirement of energy by all population across the world while the earth in its form cannot change. The need for energy and its related services to satisfy human social and economic development, welfare and health is increasing. Returning to renewables to help mitigate climate change is an excellent approach which needs to be sustainable in order to meet energy demand of future generations. The study reviewed the opportunities associated with renewable energy sources which includes: Energy Security, Energy Access, Social and Economic development, Climate Change Mitigation, and reduction of environmental and health impacts. Despite these opportunities, there are challenges that hinder the sustainability of renewable energy sources towards climate change mitigation. These challenges include Market failures, lack of information, access to raw materials for future renewable resource deployment, and our daily carbon footprint. The study suggested some measures and policy recommendations which when considered would help achieve the goal of renewable energy thus to reduce emissions, mitigate climate change and provide a clean environment as well as clean energy for all and future generations.

  10. Renewable energies in Baden-Wuerttemberg 2011; Erneuerbare Energien in Baden-Wuerttemberg 2011

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2012-11-15

    Within the contribution under consideration the Ministry of Environment, Climate Protection and Service Sector (Stuttgart, Federal Republic of Germany) reports on the following aspects: (1) Development of the energy consumption; (2) Contribution of the renewable energy sources to the energy supply; (3) Development of the amounts of renewable energy sources in the energy supply; (4) Structure of final energy supply from renewable energies; (5) Economic considerations on the utilization of renewable energy sources; (6) CO{sub 2} emissions and CO{sub 2} avoidance by means of renewable energy sources; (7) Utilization of renewable energy sources in Germany and Europe; (8) Remuneration for power from renewable energy sources according to the Renewable Energy Law and evaluation of the costs; (9) Utilization of renewable energy sources by Federal States; (10) Utilization of renewable energy sources by counties; (11) Potentials of renewable energy sources; (12) Employment effects in Baden-Wuertemberg; (13) Promotion of renewable energy sources.

  11. Renewable energy sources at decisive turning; Le energie rinnovabili a una svolta decisiva

    Energy Technology Data Exchange (ETDEWEB)

    Riboldi, S.

    2000-11-01

    The renewable energy sources will be very important for planetary environmental emergency and for technological evolution. [Italian] Marginali da molti anni, le rinnovabili diverranno di primaria importanza grazie all'emergenza ambientale planetaria e all'evoluzione tecnologica. Siamo giunti finalmente a una vera svolta epocale?.

  12. Six-Phase Vehicular Drive with Renewable DC Sources and Hybrid PWM Control of Four Inverters

    DEFF Research Database (Denmark)

    Oleschuk, Valentin; Ermuratskii, Vladimir; Blaabjerg, Frede

    2015-01-01

    The paper presents results of research of quad-inverter-based automotive system with combined scheme of PWM control of inverters, supplied by two renewable dc sources (by fuel cells and by battery). It has been shown, that hybrid switching techniques can be used successfully for control of vehicle...

  13. Capacity Optimization of Renewable Energy Sources and Battery Storage in an Autonomous Telecommunication Facility

    DEFF Research Database (Denmark)

    Dragicevic, Tomislav; Pandžić, Hrvoje; Škrlec, Davor

    2014-01-01

    This paper describes a robust optimization approach to minimize the total cost of supplying a remote telecommunication station exclusively by renewable energy sources (RES). Due to the intermittent nature of RES, such as photovoltaic (PV) panels and small wind turbines, they are normally supported...

  14. PROSPECTS OF ENERGY EFFICIENCY IMPROVEMENT AND DEVELOPMENT OF THE RENEWABLE ENERGY SOURCES IN PROVINCE OF VOJVODINA

    Energy Technology Data Exchange (ETDEWEB)

    Gvozdenac, D.; Ciric, R.; Tesic, M.

    2007-07-01

    The paper presents the outcome of the research in the field of energy efficiency improvement and development of the renewable energy sources in province of Vojvodina (Serbia). The summarized results of the paper are: - Potentials for energy efficiency improvement in Vojvodina, - Potentials for development of renewable energy sources in Vojvodina, - Proposal of measures of the energy policy for the promotion of research and development (R and D) which will use local scientific and technical potentials in the field of renewable energy sources and energy efficiency and improve the sustainability on the long run. - Proposal of measures for the energy policy in the domain of renewable energy sources development and energy efficiency and estimation of potentials for improvements by applying proposed measures in order to accomplish established tasks. - Synthesizing findings and proposals in the Action Plan of the Executive Council of the Autonomous Province of Vojvodina for the realization of the medium term program as well as the establishment of the monitoring plan for the assessment of program objectives progress. (auth)

  15. Atmospheric Renewable Energy Research, Volume 3: Solar-Power Microgrids and Atmospheric Influences

    Science.gov (United States)

    2016-09-01

    maximum ambient ( panel ) temperature of 25 °C. The solar photovoltaic (PV) panel would be mounted on a pole, and for maximum solar energy input, would...designers often use averaged azimuth and elevation angles for the panel orientation. This choice presumes the power system design is not constrained by...ARL-TR-7797 ● SEP 2016 US Army Research Laboratory Atmospheric Renewable Energy Research, Volume 3: Solar -Power Microgrids and

  16. Compact reactor/ORC power source

    Energy Technology Data Exchange (ETDEWEB)

    Meier, K.L.; Kirchner, W.L.; Willcutt, G.J.

    1986-01-01

    A compact power source that combines an organic Rankine Cycle (ORC) electric generator with a nuclear reactor heat source is being designed and fabricated. Incorporating existing ORC technology with proven reactor technology, the compact reactor/ORC power source offers high reliability while minimizing the need for component development. Thermal power at 125 kWt is removed from the coated particle fueled, graphite moderated reactor by heat pipes operating at 500/sup 0/C. Outside the reactor vessel and connected to the heat pipes are vaporizers in which the toluene ORC working fluid is heated to 370/sup 0/C. In the turbine-alternator-pump (TAP) combined-rotating unit, the thermal energy of the toluene is converted to 25 kWe of electric power. Lumped parameter systems analyses combined with a finite element thermal analysis have aided in the power source design. The analyses have provided assurance of reliable multiyear normal operation as well as full power operation with upset conditions, such as failed heat pipes and inoperative ORC vaporizers. Because of inherent high reliability, long life, and insensitivity to upset conditions, this power source is especially suited for use in remote, inaccessible locations where fuel delivery and maintenance costs are high. 10 refs.

  17. Analysis of SFCL’s in DC System with Renewable Energy Sources

    Directory of Open Access Journals (Sweden)

    S. Mohanram

    2015-12-01

    Full Text Available Superconducting fault-current limiters (SFCLs have been the subject of research and development for many years and offer an attractive solution to the problem of rising fault levels in electrical distribution systems. SFCLs can greatly reduce fault currents and the damage at the point of fault, and help improve the stability of a power system. Superconducting fault-current limiters (SFCL provide a new efficient approach to the reliable handling of such faults.(SCFLs can be used for various nominal voltages and currents, and can be adapted to particular limiting characteristics in case of short circuits. In this project, dc resistive type superconducting fault current limiter (SFCL is presented. This SFCL is designed for the HVDC system. Uniform current and voltage sharing among the SFCL modules can be observed through contact resistance tests, dc flow-through tests, and ac flow-through tests. Results of tests show that each limiting module has good uniformity in higher current system. The proposed concept can be implemented using renewable energy sources. The results are presented by using Matlab / simulink platform.

  18. Marginal share of renewable energy sources of variable electricity generation: A contribution to the concept definition

    Directory of Open Access Journals (Sweden)

    Grković Vojin R.

    2015-01-01

    Full Text Available Technology development is a keystone within the efforts toward enabling longer duration of the world fossil energy resources. The past development and the technologies applied, cause huge emissions of СО2 that must be significantly reduced. Increased usage of renewable energy sources for electricity generation (RES-e contributes essentially to the reduction of CO2, but on the other hand, under current conditions of feed-in priority reduces also the market for the electricity from fossil fuelled power plants (FFPP. The other possibility for reduction of CO2 emissions is to apply carbon capture and storage technologies as a part of overall FFPP technologies. A hypothesis presented in this paper is that there is a marginal share of RES variable electricity in overall annual electricity supply after which further increase of RES-e participation produces higher average electricity generated cost, than in the case of CO2 emission reduction by applying CCS technologies. The presented work confirms this hypothesis. Value of the marginal share depends to the price of RES-e feed-in. With the price span from 13.5 to 7.5€c/kWh, the marginal share is under 50%.

  19. Renewable Energy in Danish Municipalities - an Evaluation of The Planning Framework for Wind Power

    DEFF Research Database (Denmark)

    Sperling, Karl; Hvelplund, Frede; Mathiesen, Brian Vad

    2009-01-01

    Wind power is a maturing technology that in a number of countries is likely to contribute a major share to fully renewable energy systems. Denmark has a comparably long history of wind power development and is planning to continue expanding the existing capacity. If a large-scale penetration...... of Denmark, and more specifically to concrete wind power projects in the region of Northern Jutland. The results suggest although certain elements in the legislation have been improved, the feasibility of wind power projects cannot be guaranteed, and there is a tendency to exclude smaller turbines from...

  20. Power sources compared: The ultimate truth?

    OpenAIRE

    Flipsen, S.F.J.

    2006-01-01

    Especially, during the last decade the demand for portable power is steadily rising due to the increasing wireless products integrated in our day-to-day lives (cellular phone, personal digital assistant (PDA) and of course the remote control for your television set or VCR). These portable consumer electronics are mainly powered by alkaline batteries, and nowadays more and more by rechargeables. Alternative power sources, like fuel cells and photovoltaic cells, can be used in portable consumer...

  1. The role of power sources in the European electricity mix

    Directory of Open Access Journals (Sweden)

    Bonin Bernard

    2017-01-01

    Full Text Available The ongoing debate in Europe about energy transition enhances the necessity to evaluate the performance of the envisaged mix of power sources, in terms of production cost, CO2 emissions and security of supply. In this study, we use MIXOPTIM, a Monte-Carlo simulator of the behavior of a mix of power sources on a territory, to evaluate the performance of the present EU power mix. After a validation on the French mix, we applied it to the whole EU territory and made variational calculations around the present mix to evaluate the performance impacts induced by small changes in installed renewable power and nuclear power. According to the analyzed criteria, the study shows that a plausible way to keep an affordable MWh in Europe with minimal amount of CO2 emissions and acceptable security of supply could be to extend the life of existing Gen II nuclear reactors. All other options lead to the degradation of the mix performance, on at least one of the three criteria listed above.

  2. POLICIES AND MEASURES FOR RENEWABLE ENERGY SOURCES AND ACHIEVEMENT OF TARGETS BY 2020 IN CROATIA

    Directory of Open Access Journals (Sweden)

    Igor Raguzin

    2010-01-01

    Full Text Available This paper is considering set up a longer-term perspective and plan of actions for the development of renewable energy infrastructure in Croatia in accordance with the new Croatian Energy Sector Development Strategy. Overall target till the year 2020 has been calculated in accordance with effort sharing methodology used for Directive 2009/28/EC. The paper presents some main existing policies and measures for achieving this ambitious target, including feed-in tariffs, guarantees of origin, and greenhouse gas emissions taxation. It is addressed the necessity for creating enabling environment for promotion of renewable energy sources and gradually remove barriers for its stronger penetration on the energy market.

  3. Market Power and Investment in Renewable Electricity Generation

    DEFF Research Database (Denmark)

    Ernstsen, Rune Ramsdal; Misir, Nihat

    while incurring lower investment costs. We additionally find that highly convex investment cost greatly diminishes the impact of market power on the investment decisions. Furthermore, for both the strategic firm and the social planner, fixed baseload generation is preferable during low installed...... approach to evaluate the investment decisions. In our paper we do not only focus on the differences in costs for different technologies but also on the differences in operation of those technologies and how those differences impact the optimal investment decisions. In our model, the one-time investment...... of installed capacity in the market. In the numerical results, we find that the strategic firm tends to invest at a higher demand trigger level and lower capacity compared to the social planner for both the baseload and peakload investment cases. Hence, the strategic firm is expected to invest at a later date...

  4. Optimizing Capacities of Distributed Generation and Energy Storage in a Small Autonomous Power System Considering Uncertainty in Renewables

    Directory of Open Access Journals (Sweden)

    Ying-Yi Hong

    2015-03-01

    Full Text Available This paper explores real power generation planning, considering distributed generation resources and energy storage in a small standalone power system. On account of the Kyoto Protocol and Copenhagen Accord, wind and photovoltaic (PV powers are considered as clean and renewable energies. In this study, a genetic algorithm (GA was used to determine the optimal capacities of wind-turbine-generators, PV, diesel generators and energy storage in a small standalone power system. The investment costs (installation, unit and maintenance costs of the distributed generation resources and energy storage and the cost of fuel for the diesel generators were minimized while the reliability requirement and CO2 emission limit were fulfilled. The renewable sources and loads were modeled by random variables because of their uncertainties. The equality and inequality constraints in the genetic algorithms were treated by cumulant effects and cumulative probability of random variables, respectively. The IEEE reliability data for an 8760 h load profile with a 150 kW peak load were used to demonstrate the applicability of the proposed method.

  5. Analysis Of The Profitability of Investment In Renewable Energy Sources On The Example of A Semi-Detached House

    Directory of Open Access Journals (Sweden)

    Radziszewska-Zielina Elżbieta

    2016-01-01

    Full Text Available The paper presents an analysis of the profitability of investment in a selection of systems based on renewable energy sources on the example of a semi-detached house with a floor area of nearly 150 m2. The analysis was conducted in three variants:1 the application of a biomass boiler, solar collectors and photovoltaic panels; 2 a heat pump, solar collectors and photovoltaic panels; 3 a heat pump, solar collectors and a wind turbine. Next, the proposed solutions were compared with a traditional heating system featuring a gas-powered boiler and obtaining electricity through the power distribution grid. The investment and operational costs were calculated after the selection of the appropriate equipment. The example under analysis indicates that variant 3 entailed the highest investment costs (the purchase and fitting of a heat pump as well as the drilling required to install underground pumps. Traditional technical solutions were proven to produce the highest costs. The investment profitability analysis was conducted using both the simple and discounted methods of evaluating profitability. It was established that variant 3 yielded the shortest discounted payback period - less than 13 years. It is estimated that the investment will reach the break-even point after this time. As a summary, it must be noted that the profitability of a given investment depends on the adopted technical solutions. Due to high initials costs, investors often lack interest in the purchase and installation of renewable energy generation systems; however, the contribution of the investors can be lowered with the use of subsidies and price reductions regarding the installation of renewable energy generation systems. We can observe a decrease in the price of the most popular and efficient renewable energy systems.

  6. Rf power sources for linear colliders

    Energy Technology Data Exchange (ETDEWEB)

    Allen, M.A.; Callin, R.S.; Caryotakis, G.; Deruyter, H.; Eppley, K.R.; Fant, K.S.; Farkas, Z.D.; Fowkes, W.R.; Hoag, H.A.; Feinstein, J.; Ko, K.; Koontz, R.F.; Kroll, N.M.; Lavine, T.L.; Lee, T.G.; Loew, G.A.; Miller, R.H.; Nelson, E.M.; Ruth, R.D.; Vlieks, A.E.; Wang, J.W.; Wilson, P.B. (Stanford Linear Accelerator Center, Menlo Park, CA (USA)); Boyd, J.K.; Houk, T.; Ryne, R.D.; Westenskow, G.A.; Yu, S.S. (Lawrence Live

    1990-06-01

    The next generation of linear colliders requires peak power sources of over 200 MW per meter at frequencies above 10 GHz at pulse widths of less than 100 nsec. Several power sources are under active development, including a conventional klystron with rf pulse compression, a relativistic klystron (RK) and a crossed-field amplifier. Power from one of these has energized a 0.5 meter two- section High Gradient Accelerator (HGA) and accelerated a beam at over 80 MeV meter. Results of tests with these experimental devices are presented here.

  7. Municipal solid waste (MSW) as a renewable source of energy: current and future practices in China.

    Science.gov (United States)

    Cheng, Hefa; Hu, Yuanan

    2010-06-01

    With rapid economic growth and massive urbanization, China faces the problem of municipal solid waste (MSW) disposal and the pressing need for development of alternative energy. Waste-to-energy (WTE) incineration, which recovers energy from discarded MSW and produces electricity and/or steam for heating, is recognized as a renewable source of energy and is playing an increasingly important role in MSW management in China. This article provides an overview of the WTE industry, discusses the major challenges in expanding WTE incineration in China, namely, high capital and operational costs, equipment corrosion, air pollutant emissions, and fly ash disposal. A perspective on MSW as a renewable energy source in China is also presented. Currently, only approximately 13% of MSW generated in China is disposed in WTE facilities. With the significant benefits of environmental quality, the reduction of greenhouse gas (GHG) emissions, and government policies and financial incentives as a renewable energy source, WTE incineration industry is expected to experience significant growth in the coming decade and make greater contribution to supplying renewable energy in China. Copyright 2010 Elsevier Ltd. All rights reserved.

  8. The alternative and renewable energy sources in Mexico; Fuentes alternativas y renovables de energia en Mexico

    Energy Technology Data Exchange (ETDEWEB)

    Urbano C, J. Antonio [Instituto Politecnico Nacional, Mexico, D. F. (Mexico); Matsumoto K, Yasuhiro; Asomoza P, Rene [Centro de Investigacion y de Estudios Avanzados del Instituto Politecnico Nacional, Mexico, D. F. (Mexico)

    1996-12-31

    This paper presents an overview of the efforts that have been made in our Mexico in the area of Alternative and Renewable Sources of Energy, effort performed by different institutions, government agencies and private companies along the last 25 years. Older periods are not contemplated, although significant advances have existed, specifically in the area of small micro-hydraulic power plants, since the end of the past century and in solar collectors, more than 60 years ago, as the most relevant advances have been contemplated in these last two decades. The entire world energy demand is analyzed, making emphasis in our country, the efforts on the installed geothermal power plants, the flat collectors for domestic use, the solar power plants installed by some government agencies are also mentioned, as well as the strong growth in the photo-voltaic field at worldwide level as well as at domestic level (a graph is presented of the multiple applications of the photo-voltaic conversion of the solar energy at world level of which some of these are already operational in our country), including the hybrid systems (wind power photo-voltaic Diesel, the pilot biogas plants, the solar ponds efforts and the recently inaugurated wind-power plant of 1.575 MW installed at La Venta, in the Oaxaca State. [Espanol] El presente articulo, presenta una revision de los esfuerzos que se han desarrollado en nuestro Mexico, en el campo de las Fuentes Alternas y Renovables de Energia, esfuerzos realizados por diferentes instituciones, dependencias y companias a lo largo de los ultimos 25 anos. No se contemplan periodos mas antiguos, aunque han existido adelantos significativos, especificamente, en el campo de pequenas centrales microhidraulicas desde fines del siglo, y de colectores solares desde hace mas de 60 anos, ya que los mas relevantes se contemplan en estas ultimas dos decadas de recopilacion. Se analiza la demanda de energia mundial, haciendo enfasis a nuestro pais, se mencionan los

  9. Radioisotope Power Sources for MEMS Devices,

    Energy Technology Data Exchange (ETDEWEB)

    Blanchard, J.P.

    2001-06-17

    Microelectromechanical systems (MEMS) comprise a rapidly expanding research field with potential applications varying from sensors in airbags to more recent optical applications. Depending on the application, these devices often require an on-board power source for remote operation, especially in cases requiring operation for an extended period of time. Previously suggested power sources include fossil fuels and solar energy, but nuclear power sources may provide significant advantages for certain applications. Hence, the objective of this study is to establish the viability of using radioisotopes to power realistic MEMS devices. A junction-type battery was constructed using silicon and a {sup 63}Ni liquid source. A source volume containing 64 {micro}Ci provided a power of {approx}0.07 nW. A more novel application of nuclear sources for MEMS applications involves the creation of a resonator that is driven by charge collection in a cantilever beam. Preliminary results have established the feasibility of this concept, and future work will optimize the design for various applications.

  10. Renewable energy utilization and CO2 mitigation in the power sector: A case study in selected GMS countries

    Directory of Open Access Journals (Sweden)

    Kong Pagnarith

    2011-06-01

    Full Text Available Renewable energy is an alternative resource to substitute fossil fuels. Currently, the share of renewable energy inpower generation is very low. The selected Greater Mekong Sub-region (GMS, namely, Cambodia, Laos, Thailand andVietnam is a region having abundant of renewable energy resources. Though these countries have a high potential of renewableenergy utilization, they are still highly dependent on the imported fossil fuels for electricity generation. The less contributionof renewable energy in the power sector in the region is due to the high cost of technologies. Renewable energytechnology cannot compete with the conventional power plant. However, in order to promote renewable energy utilizationand reduce dependency on imported fossil fuel as well as to mitigate CO2 emissions from the power sector, this study introducesfour renewable energy technologies, namely, biomass, wind, solar PV, and geothermal power, for substitution of conventionaltechnologies. To make the renewable energy competitive to the fossil fuels, incentives in terms of carbon credit of20$/ton-ne CO2 are taken into account. Results are analyzed by using the Long-Range Energy Alternative Planning System(LEAP modeling. Results of analyses reveal that in the renewable energy (RE scenario the biomass power, wind, solarphotovoltaics, and geothermal would contribute in electricity supply for 5.47 GW in the region, accounted for 3.5% in 2030.The RE scenario with carbon credits could mitigate CO2 emissions at about 36.0 million tonne at lower system cost whencompared to the business-as-usual scenario.

  11. Storage and balancing synergies in a fully or highly renewable pan-European power system

    DEFF Research Database (Denmark)

    Rasmussen, Morten Grud; Bruun Andresen, Gorm; Greiner, Martin

    2012-01-01

    Through a parametric time-series analysis of eight years of hourly data, we quantify the storage size and balancing energy needs for highly and fully renewable European power systems for different levels and mixes of wind and solar energy. By applying a dispatch strategy that minimizes...... that combined with a low-efficiency hydrogen storage and a level of balancing equal to what is today provided by storage lakes, it is sufficient to meet the European electricity demand in a fully renewable power system where the average power generation from combined wind and solar exceeds the demand by only...... the balancing energy needs for a given storage size, the interplay between storage and balancing is quantified, providing a hard upper limit on their synergy. An efficient but relatively small storage reduces balancing energy needs significantly due to its influence on intra-day mismatches. Furthermore, we show...

  12. An overview of the EU Member States support schemes for the promotion of renewable energy sources

    Energy Technology Data Exchange (ETDEWEB)

    Poullikkas, Andreas; Kourtis, George; Hadjipaschalis, Ioannis [Electricity Authority of Cyprus, P.O. Box 24506, 1399 Nicosia (Cyprus)

    2012-07-01

    In this work, an overview of the European Union (EU) Member States support schemes for the promotion of renewable energy sources (RES) is provided. In particular, the status of the electricity generation capacity as well as the RES mixture in the Member States is described. Moreover, the different support schemes such as, investment support, feed-in tariffs (FiTs), tradable green certificates, and fiscal and financial measures which the Member States have adopted for the promotion of RES technologies are discussed in detail. Some Member States are implementing a single support scheme for the promotion of RES for power generation (RES-E), e.g., seven Member States use FiTs, or implement a hybrid support scheme by combining all or some of the four categories of the RES-E supporting schemes. Although, these support schemes have increased the penetration of the RES-E technologies in the Member States, still there is a long way in order to achieve the 2020 target. The reason for this may be that the way these schemes have been used so far, i.e., either as single support schemes or in combination of FiTs or tradable green certificates with investment support and fiscal and financial measures, has been ineffective. A more effective combination could be a hybrid scheme consisting of FiTs with tradable green certificates measures, as in the case of Italy and United Kingdom, that will increase the RES-E penetration and eliminate the possible technical problems which will arise from this increased penetration and have an effect in the stability of the power system.

  13. Promoting electricity from renewable energy sources -- lessons learned from the EU, U.S. and Japan

    Energy Technology Data Exchange (ETDEWEB)

    Haas, Reinhard; Meyer, Niels I.; Held, Anne; Finon, Dominique; Lorenzoni, Arturo; Wiser, Ryan; Nishio, Ken-ichiro

    2007-06-01

    The promotion of electricity generated from Renewable Energy Sources (RES) has recently gained high priority in the energy policy strategies of many countries in response to concerns about global climate change, energy security and other reasons. This chapter compares and contrasts the experience of a number of countries in Europe, states in the US as well as Japan in promoting RES, identifying what appear to be the most successful policy measures. Clearly, a wide range of policy instruments have been tried and are in place in different parts of the world to promote renewable energy technologies. The design and performance of these schemes varies from place to place, requiring further research to determine their effectiveness in delivering the desired results. The main conclusions that can be drawn from the present analysis are: (1) Generally speaking, promotional schemes that are properly designed within a stable framework and offer long-term investment continuity produce better results. Credibility and continuity reduce risks thus leading to lower profit requirements by investors. (2) Despite their significant growth in absolute terms in a number of key markets, the near-term prognosis for renewables is one of modest success if measured in terms of the percentage of the total energy provided by renewables on a world-wide basis. This is a significant challenge, suggesting that renewables have to grow at an even faster pace if we expect them to contribute on a significant scale to the world's energy mix.

  14. Advanced power sources for space missions

    Science.gov (United States)

    Gavin, Joseph G., Jr.; Burkes, Tommy R.; English, Robert E.; Grant, Nicholas J.; Kulcinski, Gerald L.; Mullin, Jerome P.; Peddicord, K. Lee; Purvis, Carolyn K.; Sarjeant, W. James; Vandevender, J. Pace

    1989-01-01

    Approaches to satisfying the power requirements of space-based Strategic Defense Initiative (SDI) missions are studied. The power requirements for non-SDI military space missions and for civil space missions of the National Aeronautics and Space Administration (NASA) are also considered. The more demanding SDI power requirements appear to encompass many, if not all, of the power requirements for those missions. Study results indicate that practical fulfillment of SDI requirements will necessitate substantial advances in the state of the art of power technology. SDI goals include the capability to operate space-based beam weapons, sometimes referred to as directed-energy weapons. Such weapons pose unprecedented power requirements, both during preparation for battle and during battle conditions. The power regimes for these two sets of applications are referred to as alert mode and burst mode, respectively. Alert-mode power requirements are presently stated to range from about 100 kW to a few megawatts for cumulative durations of about a year or more. Burst-mode power requirements are roughly estimated to range from tens to hundreds of megawatts for durations of a few hundred to a few thousand seconds. There are two likely energy sources, chemical and nuclear, for powering SDI directed-energy weapons during the alert and burst modes. The choice between chemical and nuclear space power systems depends in large part on the total duration during which power must be provided. Complete study findings, conclusions, and eight recommendations are reported.

  15. Exploitation of Renewable Energy--A Strategic Choice for Sustainable Development of Power Industry

    Institute of Scientific and Technical Information of China (English)

    Zhou Dabing

    2005-01-01

    Since China is being faced with the pressure of energy shortage and environmental conservation, the power industry in China has to actively develop the renewable energy for electricity generation while raising the utilization efficiency of conventional energy. In view of such facts, China Guodian Corporation decided on a development strategy of giving priority to green power, such as wind power. Based on the national planning of wind power development, the corporation set out its own target of installing wind power capacity of 1500 MW by the end of 2010, and is adopting appropriate measures including promoting the localization of wind turbines and developing hydropower, thermal power and wind power simultaneously. Moreover, it put some relevant suggestions.

  16. Control and design of full-bridge three-level converter for renewable energy sources

    DEFF Research Database (Denmark)

    Yao, Zhilei; Xu, Jing; Guerrero, Josep M.

    2015-01-01

    Output voltage of renewable energy sources, such as fuel cell and PV cell, is often low and varies widely with load and environmental conditions. Therefore, the high step-up DC-DC converter is needed between renewable energy sources and the grid-connected inverter. However, voltage stress...... of rectifier diodes is high and filter is large in traditional voltage-source converters in a wide input-voltage range. In order to solve the aforementioned problems, a full-bridge (FB) three-level (TL) converter is proposed. It can operate at both two-level and three-level modes, so it is suitable for wide...... input-voltage range application. Compared with FB converter, voltage stress of rectifier diodes and the filter can be reduced. Operating principle and control strategy of the proposed converter are illustrated. Design guidelines and example are given. Simulation results of a 1-kW FB TL converter verify...

  17. Integrating Variable Renewable Energy in Electric Power Markets: Best Practices from International Experience

    Energy Technology Data Exchange (ETDEWEB)

    Cochran, J.; Bird, L.; Heeter, J.; Arent, D. A.

    2012-04-01

    Many countries -- reflecting very different geographies, markets, and power systems -- are successfully managing high levels of variable renewable energy on the electric grid, including that from wind and solar energy. This study documents the diverse approaches to effective integration of variable renewable energy among six countries -- Australia (South Australia), Denmark, Germany, Ireland, Spain, and the United States (Western region-Colorado and Texas)-- and summarizes policy best practices that energy ministers and other stakeholders can pursue to ensure that electricity markets and power systems can effectively coevolve with increasing penetrations of variable renewable energy. Each country has crafted its own combination of policies, market designs, and system operations to achieve the system reliability and flexibility needed to successfully integrate renewables. Notwithstanding this diversity, the approaches taken by the countries studied all coalesce around five strategic areas: lead public engagement, particularly for new transmission; coordinate and integrate planning; develop rules for market evolution that enable system flexibility; expand access to diverse resources and geographic footprint of operations; and improve system operations. The ability to maintain a broad ecosystem perspective, to organize and make available the wealth of experiences, and to ensure a clear path from analysis to enactment should be the primary focus going forward.

  18. Power sources manufactures association : power technology roadmap workshop - 2006.

    Energy Technology Data Exchange (ETDEWEB)

    Bowers, John S.

    2006-03-01

    The Power Sources Manufacturers Association (PSMA) is pleased to announce the release of the latest Power Technology Roadmap Workshop Report. This Fifth Edition Workshop Report includes presentations and discussions from the workshop as seen by the participants that included many of the industry's most influential members representing end-users, power supply manufacturers, component suppliers, consultants and academia. This report provides detailed projections for the next three to four years of various technologies in a quantitative form. There was special emphasis on how the increasing use of digital technologies will affect the industry in the next four years. The technology trend analysis and the roadmap is provided for the following specific product families expected to be the areas of largest market growth: (1) Ac-dc front end power supplies--1 kW from a single phase ac source; (2) External ac-dc power supplies; (3) Dc-dc bus converters; and (4) Non-isolated dc-dc converters. Bruce Miller, Chairman of PSMA, stated that 'the Power Technology Roadmap Workshop Report is an extensive document that analyzes and provides projections for most major technical parameters for a specific power supply. It is a unique document as it contains technology/parametric trends in a roadmap fashion from a variety of diverse sources, giving significant depth to its content. No such information is available from any other source'. The Power Technology Roadmap Workshop Report is available at no cost as to PSMA Regular and Associate members and at a reduced price to Affiliate members as a benefit of membership. The report will be offered to non-members at a price of $2490. For further information or to buy a copy of the report, please visit the publications page or the PSMA website or contact the Association Office.

  19. Addressing Palm Biodiesel as Renewable Fuel for the Indonesian Power Generation Sector: Java-Madura-Bali System

    Directory of Open Access Journals (Sweden)

    Natarianto Indrawan

    2011-11-01

    Full Text Available Energy security defined as how to equitably provide available, affordable, reliable efficient, environmentally friendly, proactively governed and socially acceptable energy services to end user. It has in recent years taken attention of policymakers in different parts of the world. Formulating policy to improve energy security is mandatory, not only because of depleting fossil resource, but also implementing diversity of energy source since utilization abundant renewable energy resources can increase the security of energy supply. One of the abundant renewable energy resources in Indonesia is palm oil. This study analyses the utilization of palm biodiesel for Indonesian power generation sector in the Java-Madura-Bali (JAMALI system. Two scenarios were created by projecting the demand and environmental impact as well as GHG emissions reduction over the next 25 years. The first scenario subjects on current energy policy, while the second scenario is to substitute of fossil fuel which is still used in the JAMALI power generation system. Effect of palm biodiesel on emission of Carbon Dioxide, Carbon Monoxide, Sulfur Dioxide, Nitrogen Oxides, Particulate Matter, and Volatile Organic Compounds were estimated for each scenario. An externality analysis to complete the environmental analysis was conducted and resource analysis of palm oil plantation based biodiesel was also estimated. Finally, the economics feasibility of palm biodiesel in the power generation sector was analyzed.

  20. ANALYSIS OF THE TRAINING NEEDS IN RENEWABLE ENERGY SOURCES FOR AGRICULTURAL SECTOR

    Directory of Open Access Journals (Sweden)

    Zuzana PALKOVA

    2014-06-01

    Full Text Available Global climate changes, the greenhouse gas emissions and reduced sources of traditional fossil fuels are one of themost serious environmental problems of present time. This fact was the starting point for Directive 2009/28/EC,which defined two objectives in the area of RES, the mandatory 20% share of RES in gross final energyconsumption in the European Community and the mandatory 10% share of RES in transport, which all MemberStates must achieve by 2020. In 2011 was the share of renewable energy sources in total energy production in theEuropean Union 13%. Promoting the use of renewable sources for electricity, heat, hot water, as well as promotingthe use of biomass energy and construction of energy efficient buildings brings, in addition to environmentalaspects, the development of innovative technologies, the transition to an energy-efficient economy and increaseemployment opportunities. Development in clean technologies becomes a strategic not only in terms of ecology, buthas a significant impact on economic development and employment. This paper presents an analysis of trainingneeds in clean technologies and renewable energy sources and through the Leonardo da Vincis’ projects – AVARESand C-TEST – supported by European Commission to show how to increase the attractiveness and accessibility ofvocational education and training for employees in agricultural sector in the European Union.