Image Based Rendering and Virtual Reality

DEFF Research Database (Denmark)

Livatino, Salvatore

The Presentation concerns with an overview of Image Based Rendering approaches and their use on Virtual Reality, including Virtual Photography and Cinematography, and Mobile Robot Navigation.......The Presentation concerns with an overview of Image Based Rendering approaches and their use on Virtual Reality, including Virtual Photography and Cinematography, and Mobile Robot Navigation....

Earth mortars and earth-lime renders

Directory of Open Access Journals (Sweden)

Maria Fernandes

2008-01-01

Full Text Available Earth surface coatings play a decorative architectural role, apart from their function as wall protection. In Portuguese vernacular architecture, earth mortars were usually applied on stone masonry, while earth renders and plasters were used on indoors surface coatings. Limestone exists only in certain areas of the country and consequently lime was not easily available everywhere, especially on granite and schist regions where stone masonry was a current building technique. In the central west coast of Portugal, the lime slaking procedure entailed slaking the quicklime mixed with earth (sandy soil, in a pit; the resulting mixture would then be combined in a mortar or plaster. This was also the procedure for manufactured adobes stabilized with lime. Adobe buildings with earth-lime renderings and plasters were also traditional in the same region, using lime putty and lime wash for final coat and decoration. Classic decoration on earth architecture from the 18th-19th century was in many countries a consequence of the François Cointeraux (1740-1830 manuals - Les Cahiers d'Architecture Rurale" (1793 - a French guide for earth architecture and building construction. This manual arrived to Portugal in the beginning of XIX century, but was never translated to Portuguese. References about decoration for earth houses were explained on this manual, as well as procedures about earth-lime renders and ornamentation of earth walls; in fact, these procedures are exactly the same as the ones used in adobe buildings in this Portuguese region. The specific purpose of the present paper is to show some cases of earth mortars, renders and plasters on stone buildings in Portugal and to explain the methods of producing earth-lime renders, and also to show some examples of rendering and coating with earth-lime in Portuguese adobe vernacular architecture.

Hybrid rendering of the chest and virtual bronchoscopy [corrected].

Science.gov (United States)

Seemann, M D; Seemann, O; Luboldt, W; Gebicke, K; Prime, G; Claussen, C D

2000-10-30

Thin-section spiral computed tomography was used to acquire the volume data sets of the thorax. The tracheobronchial system and pathological changes of the chest were visualized using a color-coded surface rendering method. The structures of interest were then superimposed on a volume rendering of the other thoracic structures, thus producing a hybrid rendering. The hybrid rendering technique exploit the advantages of both rendering methods and enable virtual bronchoscopic examinations using different representation models. Virtual bronchoscopic examinations with a transparent color-coded shaded-surface model enables the simultaneous visualization of both the airways and the adjacent structures behind of the tracheobronchial wall and therefore, offers a practical alternative to fiberoptic bronchoscopy. Hybrid rendering and virtual endoscopy obviate the need for time consuming detailed analysis and presentation of axial source images.

Bilateral male breast cancer with male potential hypogonadism

Directory of Open Access Journals (Sweden)

Kurokawa Yasushi

2007-06-01

Full Text Available Abstract Background Male breast cancer is a comparatively rare disease, and simultaneous bilateral male breast cancer is considered to be an extremely rare event. Risk factors are said to be genetic factors and hormonal abnormalities due to obesity or testicular diseases. Case presentation The patient was a 47-year-old Japanese male. His family had no history of female breast cancer. This patient also had hypospadias and hormonal examination indicated the presence of primary testicular potential hypogonadism, and these hormonal abnormalities seemed to be present since childhood or the fetal period. The bilateral breast cancer developed in this man at a comparatively young age, and histopathological studies of multiple sections showed that there was almost no normal epithelial cell in the ducts, while the ducts were almost completely filled with breast cancer cells. Conclusion It is thought that male breast cancer is caused by an imbalance between estrogen and testosterone. We cannot rule out the possibility that the breast cancer developed due to the effect of the slight elevation of estrogen over a long period of time, but the actual causative factors in this patient were unable to be definitively identified. In the future, we hope to further elucidate the causes of male breast cancer.

Rendering the Topological Spines

Energy Technology Data Exchange (ETDEWEB)

Nieves-Rivera, D. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2015-05-05

Many tools to analyze and represent high dimensional data already exits yet most of them are not flexible, informative and intuitive enough to help the scientists make the corresponding analysis and predictions, understand the structure and complexity of scientific data, get a complete picture of it and explore a greater number of hypotheses. With this in mind, N-Dimensional Data Analysis and Visualization (ND²AV) is being developed to serve as an interactive visual analysis platform with the purpose of coupling together a number of these existing tools that range from statistics, machine learning, and data mining, with new techniques, in particular with new visualization approaches. My task is to create the rendering and implementation of a new concept called topological spines in order to extend ND²AV's scope. Other existing visualization tools create a representation preserving either the topological properties or the structural (geometric) ones because it is challenging to preserve them both simultaneously. Overcoming such challenge by creating a balance in between them, the topological spines are introduced as a new approach that aims to preserve them both. Its render using OpenGL and C++ and is currently being tested to further on be implemented on ND²AV. In this paper I will present what are the Topological Spines and how they are rendered.

Evaluating progressive-rendering algorithms in appearance design tasks.

Science.gov (United States)

Jiawei Ou; Karlik, Ondrej; Křivánek, Jaroslav; Pellacini, Fabio

2013-01-01

Progressive rendering is becoming a popular alternative to precomputational approaches to appearance design. However, progressive algorithms create images exhibiting visual artifacts at early stages. A user study investigated these artifacts' effects on user performance in appearance design tasks. Novice and expert subjects performed lighting and material editing tasks with four algorithms: random path tracing, quasirandom path tracing, progressive photon mapping, and virtual-point-light rendering. Both the novices and experts strongly preferred path tracing to progressive photon mapping and virtual-point-light rendering. None of the participants preferred random path tracing to quasirandom path tracing or vice versa; the same situation held between progressive photon mapping and virtual-point-light rendering. The user workflow didn’t differ significantly with the four algorithms. The Web Extras include a video showing how four progressive-rendering algorithms converged (at http://youtu.be/ck-Gevl1e9s), the source code used, and other supplementary materials.

Moisture movements in render on brick wall

DEFF Research Database (Denmark)

Hansen, Kurt Kielsgaard; Munch, Thomas Astrup; Thorsen, Peter Schjørmann

2003-01-01

A three-layer render on brick wall used for building facades is studied in the laboratory. The vertical render surface is held in contact with water for 24 hours simulating driving rain while it is measured with non-destructive X-ray equipment every hour in order to follow the moisture front...

Sketchy Rendering for Information Visualization.

Science.gov (United States)

Wood, J; Isenberg, P; Isenberg, T; Dykes, J; Boukhelifa, N; Slingsby, A

2012-12-01

We present and evaluate a framework for constructing sketchy style information visualizations that mimic data graphics drawn by hand. We provide an alternative renderer for the Processing graphics environment that redefines core drawing primitives including line, polygon and ellipse rendering. These primitives allow higher-level graphical features such as bar charts, line charts, treemaps and node-link diagrams to be drawn in a sketchy style with a specified degree of sketchiness. The framework is designed to be easily integrated into existing visualization implementations with minimal programming modification or design effort. We show examples of use for statistical graphics, conveying spatial imprecision and for enhancing aesthetic and narrative qualities of visualization. We evaluate user perception of sketchiness of areal features through a series of stimulus-response tests in order to assess users' ability to place sketchiness on a ratio scale, and to estimate area. Results suggest relative area judgment is compromised by sketchy rendering and that its influence is dependent on the shape being rendered. They show that degree of sketchiness may be judged on an ordinal scale but that its judgement varies strongly between individuals. We evaluate higher-level impacts of sketchiness through user testing of scenarios that encourage user engagement with data visualization and willingness to critique visualization design. Results suggest that where a visualization is clearly sketchy, engagement may be increased and that attitudes to participating in visualization annotation are more positive. The results of our work have implications for effective information visualization design that go beyond the traditional role of sketching as a tool for prototyping or its use for an indication of general uncertainty.

Local and Global Illumination in the Volume Rendering Integral

Energy Technology Data Exchange (ETDEWEB)

Max, N; Chen, M

2005-10-21

This article is intended as an update of the major survey by Max [1] on optical models for direct volume rendering. It provides a brief overview of the subject scope covered by [1], and brings recent developments, such as new shadow algorithms and refraction rendering, into the perspective. In particular, we examine three fundamentals aspects of direct volume rendering, namely the volume rendering integral, local illumination models and global illumination models, in a wavelength-independent manner. We review the developments on spectral volume rendering, in which visible light are considered as a form of electromagnetic radiation, optical models are implemented in conjunction with representations of spectral power distribution. This survey can provide a basis for, and encourage, new efforts for developing and using complex illumination models to achieve better realism and perception through optical correctness.

Standardized rendering from IR surveillance motion imagery

Science.gov (United States)

Prokoski, F. J.

2014-06-01

Government agencies, including defense and law enforcement, increasingly make use of video from surveillance systems and camera phones owned by non-government entities.Making advanced and standardized motion imaging technology available to private and commercial users at cost-effective prices would benefit all parties. In particular, incorporating thermal infrared into commercial surveillance systems offers substantial benefits beyond night vision capability. Face rendering is a process to facilitate exploitation of thermal infrared surveillance imagery from the general area of a crime scene, to assist investigations with and without cooperating eyewitnesses. Face rendering automatically generates greyscale representations similar to police artist sketches for faces in surveillance imagery collected from proximate locations and times to a crime under investigation. Near-realtime generation of face renderings can provide law enforcement with an investigation tool to assess witness memory and credibility, and integrate reports from multiple eyewitnesses, Renderings can be quickly disseminated through social media to warn of a person who may pose an immediate threat, and to solicit the public's help in identifying possible suspects and witnesses. Renderings are pose-standardized so as to not divulge the presence and location of eyewitnesses and surveillance cameras. Incorporation of thermal infrared imaging into commercial surveillance systems will significantly improve system performance, and reduce manual review times, at an incremental cost that will continue to decrease. Benefits to criminal justice would include improved reliability of eyewitness testimony and improved accuracy of distinguishing among minority groups in eyewitness and surveillance identifications.

Remote volume rendering pipeline for mHealth applications

Science.gov (United States)

Gutenko, Ievgeniia; Petkov, Kaloian; Papadopoulos, Charilaos; Zhao, Xin; Park, Ji Hwan; Kaufman, Arie; Cha, Ronald

2014-03-01

We introduce a novel remote volume rendering pipeline for medical visualization targeted for mHealth (mobile health) applications. The necessity of such a pipeline stems from the large size of the medical imaging data produced by current CT and MRI scanners with respect to the complexity of the volumetric rendering algorithms. For example, the resolution of typical CT Angiography (CTA) data easily reaches 512^3 voxels and can exceed 6 gigabytes in size by spanning over the time domain while capturing a beating heart. This explosion in data size makes data transfers to mobile devices challenging, and even when the transfer problem is resolved the rendering performance of the device still remains a bottleneck. To deal with this issue, we propose a thin-client architecture, where the entirety of the data resides on a remote server where the image is rendered and then streamed to the client mobile device. We utilize the display and interaction capabilities of the mobile device, while performing interactive volume rendering on a server capable of handling large datasets. Specifically, upon user interaction the volume is rendered on the server and encoded into an H.264 video stream. H.264 is ubiquitously hardware accelerated, resulting in faster compression and lower power requirements. The choice of low-latency CPU- and GPU-based encoders is particularly important in enabling the interactive nature of our system. We demonstrate a prototype of our framework using various medical datasets on commodity tablet devices.

A Sort-Last Rendering System over an Optical Backplane

Directory of Open Access Journals (Sweden)

Yasuhiro Kirihata

2005-06-01

Full Text Available Sort-Last is a computer graphics technique for rendering extremely large data sets on clusters of computers. Sort-Last works by dividing the data set into even-sized chunks for parallel rendering and then composing the images to form the final result. Since sort-last rendering requires the movement of large amounts of image data among cluster nodes, the network interconnecting the nodes becomes a major bottleneck. In this paper, we describe a sort-last rendering system implemented on a cluster of computers whose nodes are connected by an all-optical switch. The rendering system introduces the notion of the Photonic Computing Engine, a computing system built dynamically by using the optical switch to create dedicated network connections among cluster nodes. The sort-last volume rendering algorithm was implemented on the Photonic Computing Engine, and its performance is evaluated. Prelimi- nary experiments show that performance is affected by the image composition time and average payload size. In an attempt to stabilize the performance of the system, we have designed a flow control mechanism that uses feedback messages to dynamically adjust the data flow rate within the computing engine.

GPU Pro 5 advanced rendering techniques

CERN Document Server

Engel, Wolfgang

2014-01-01

In GPU Pro5: Advanced Rendering Techniques, section editors Wolfgang Engel, Christopher Oat, Carsten Dachsbacher, Michal Valient, Wessam Bahnassi, and Marius Bjorge have once again assembled a high-quality collection of cutting-edge techniques for advanced graphics processing unit (GPU) programming. Divided into six sections, the book covers rendering, lighting, effects in image space, mobile devices, 3D engine design, and compute. It explores rasterization of liquids, ray tracing of art assets that would otherwise be used in a rasterized engine, physically based area lights, volumetric light

Fast algorithm for the rendering of three-dimensional surfaces

Science.gov (United States)

Pritt, Mark D.

1994-02-01

It is often desirable to draw a detailed and realistic representation of surface data on a computer graphics display. One such representation is a 3D shaded surface. Conventional techniques for rendering shaded surfaces are slow, however, and require substantial computational power. Furthermore, many techniques suffer from aliasing effects, which appear as jagged lines and edges. This paper describes an algorithm for the fast rendering of shaded surfaces without aliasing effects. It is much faster than conventional ray tracing and polygon-based rendering techniques and is suitable for interactive use. On an IBM RISC System/6000TM workstation it renders a 1000 X 1000 surface in about 7 seconds.

Innovative Lime Pozzolana Renders for Reconstruction of Historical Buildings

International Nuclear Information System (INIS)

Vejmelkova, E.; Maca, P.; Konvalinka, P.; Cerny, R.

2011-01-01

Bulk density, matrix density, open porosity, compressive strength, bending strength, water sorptivity, moisture diffusivity, water vapor diffusion coefficient, thermal conductivity, specific heat capacity and thermal diffusivity of two innovative renovation renders on limepozzolana basis are analyzed. The obtained results are compared with reference lime plaster and two commercial renovation renders, and conclusions on the applicability of the particular renders in practical reconstruction works are drawn. (author)

Validation of a colour rendering index based on memory colours

OpenAIRE

Smet, Kevin; Jost-Boissard, Sophie; Ryckaert, Wouter; Deconinck, Geert; Hanselaer, Peter

2010-01-01

In this paper the performance of a colour rendering index based on memory colours is investigated in comparison with the current CIE Colour Rendering Index, the NIST Colour Quality Scale and visual appreciation results obtained at CNRS at Lyon University for a set of 3000K and 4000K LED light sources. The Pearson and Spearman correlation coefficients between each colour rendering metric and the two sets of visual results were calculated. It was found that the memory colour based colour render...

Media Presentation Synchronisation for Non-monolithic Rendering Architectures

NARCIS (Netherlands)

I. Vaishnavi (Ishan); D.C.A. Bulterman (Dick); P.S. Cesar Garcia (Pablo Santiago); B. Gao (Bo)

2007-01-01

htmlabstractNon-monolithic renderers are physically distributed media playback engines. Non-monolithic renderers may use a number of different underlying network connection types to transmit media items belonging to a presentation. There is therefore a need for a media based and inter-network- type

Extreme simplification and rendering of point sets using algebraic multigrid

NARCIS (Netherlands)

Reniers, D.; Telea, A.C.

2009-01-01

We present a novel approach for extreme simplification of point set models, in the context of real-time rendering. Point sets are often rendered using simple point primitives, such as oriented discs. However, this requires using many primitives to render even moderately simple shapes. Often, one

Volume rendering in treatment planning for moving targets

Energy Technology Data Exchange (ETDEWEB)

Gemmel, Alexander [GSI-Biophysics, Darmstadt (Germany); Massachusetts General Hospital, Boston (United States); Wolfgang, John A.; Chen, George T.Y. [Massachusetts General Hospital, Boston (United States)

2009-07-01

Advances in computer technologies have facilitated the development of tools for 3-dimensional visualization of CT-data sets with volume rendering. The company Fovia has introduced a high definition volume rendering engine (HDVR trademark by Fovia Inc., Palo Alto, USA) that is capable of representing large CT data sets with high user interactivity even on standard PCs. Fovia provides a software development kit (SDK) that offers control of all the features of the rendering engine. We extended the SDK by functionalities specific to the task of treatment planning for moving tumors. This included navigation of the patient's anatomy in beam's eye view, fast point-and-click measurement of lung tumor trajectories as well as estimation of range perturbations due to motion by calculation of (differential) water equivalent path lengths for protons and carbon ions on 4D-CT data sets. We present patient examples to demonstrate the advantages and disadvantages of volume rendered images as compared to standard 2-dimensional axial plane images. Furthermore, we show an example of a range perturbation analysis. We conclude that volume rendering is a powerful technique for the representation and analysis of large time resolved data sets in treatment planning.

Fast DRR splat rendering using common consumer graphics hardware

International Nuclear Information System (INIS)

Spoerk, Jakob; Bergmann, Helmar; Wanschitz, Felix; Dong, Shuo; Birkfellner, Wolfgang

2007-01-01

Digitally rendered radiographs (DRR) are a vital part of various medical image processing applications such as 2D/3D registration for patient pose determination in image-guided radiotherapy procedures. This paper presents a technique to accelerate DRR creation by using conventional graphics hardware for the rendering process. DRR computation itself is done by an efficient volume rendering method named wobbled splatting. For programming the graphics hardware, NVIDIAs C for Graphics (Cg) is used. The description of an algorithm used for rendering DRRs on the graphics hardware is presented, together with a benchmark comparing this technique to a CPU-based wobbled splatting program. Results show a reduction of rendering time by about 70%-90% depending on the amount of data. For instance, rendering a volume of 2x10 6 voxels is feasible at an update rate of 38 Hz compared to 6 Hz on a common Intel-based PC using the graphics processing unit (GPU) of a conventional graphics adapter. In addition, wobbled splatting using graphics hardware for DRR computation provides higher resolution DRRs with comparable image quality due to special processing characteristics of the GPU. We conclude that DRR generation on common graphics hardware using the freely available Cg environment is a major step toward 2D/3D registration in clinical routine

3D rendering and interactive visualization technology in large industry CT

International Nuclear Information System (INIS)

Xiao Yongshun; Zhang Li; Chen Zhiqiang; Kang Kejun

2002-01-01

The author introduces the applications of interactive 3D rendering technology in the large ICT. It summarizes and comments on the iso-surfaces rendering and the direct volume rendering methods used in ICT. The author emphasizes on the technical analysis of the 3D rendering process of ICT volume data sets, and summarizes the difficulties of the inspection subsystem design in large ICT

3D rendering and interactive visualization technology in large industry CT

International Nuclear Information System (INIS)

Xiao Yongshun; Zhang Li; Chen Zhiqiang; Kang Kejun

2001-01-01

This paper introduces the applications of interactive 3D rendering technology in the large ICT. It summarizes and comments on the iso-surfaces rendering and the direct volume rendering methods used in ICT. The paper emphasizes on the technical analysis of the 3D rendering process of ICT volume data sets, and summarizes the difficulties of the inspection subsystem design in large ICT

A Real-Time Sound Field Rendering Processor

Directory of Open Access Journals (Sweden)

Tan Yiyu

2017-12-01

Full Text Available Real-time sound field renderings are computationally intensive and memory-intensive. Traditional rendering systems based on computer simulations suffer from memory bandwidth and arithmetic units. The computation is time-consuming, and the sample rate of the output sound is low because of the long computation time at each time step. In this work, a processor with a hybrid architecture is proposed to speed up computation and improve the sample rate of the output sound, and an interface is developed for system scalability through simply cascading many chips to enlarge the simulated area. To render a three-minute Beethoven wave sound in a small shoe-box room with dimensions of 1.28 m × 1.28 m × 0.64 m, the field programming gate array (FPGA-based prototype machine with the proposed architecture carries out the sound rendering at run-time while the software simulation with the OpenMP parallelization takes about 12.70 min on a personal computer (PC with 32 GB random access memory (RAM and an Intel i7-6800K six-core processor running at 3.4 GHz. The throughput in the software simulation is about 194 M grids/s while it is 51.2 G grids/s in the prototype machine even if the clock frequency of the prototype machine is much lower than that of the PC. The rendering processor with a processing element (PE and interfaces consumes about 238,515 gates after fabricated by the 0.18 µm processing technology from the ROHM semiconductor Co., Ltd. (Kyoto Japan, and the power consumption is about 143.8 mW.

Simplification of Visual Rendering in Simulated Prosthetic Vision Facilitates Navigation.

Science.gov (United States)

Vergnieux, Victor; Macé, Marc J-M; Jouffrais, Christophe

2017-09-01

Visual neuroprostheses are still limited and simulated prosthetic vision (SPV) is used to evaluate potential and forthcoming functionality of these implants. SPV has been used to evaluate the minimum requirement on visual neuroprosthetic characteristics to restore various functions such as reading, objects and face recognition, object grasping, etc. Some of these studies focused on obstacle avoidance but only a few investigated orientation or navigation abilities with prosthetic vision. The resolution of current arrays of electrodes is not sufficient to allow navigation tasks without additional processing of the visual input. In this study, we simulated a low resolution array (15 × 18 electrodes, similar to a forthcoming generation of arrays) and evaluated the navigation abilities restored when visual information was processed with various computer vision algorithms to enhance the visual rendering. Three main visual rendering strategies were compared to a control rendering in a wayfinding task within an unknown environment. The control rendering corresponded to a resizing of the original image onto the electrode array size, according to the average brightness of the pixels. In the first rendering strategy, vision distance was limited to 3, 6, or 9 m, respectively. In the second strategy, the rendering was not based on the brightness of the image pixels, but on the distance between the user and the elements in the field of view. In the last rendering strategy, only the edges of the environments were displayed, similar to a wireframe rendering. All the tested renderings, except the 3 m limitation of the viewing distance, improved navigation performance and decreased cognitive load. Interestingly, the distance-based and wireframe renderings also improved the cognitive mapping of the unknown environment. These results show that low resolution implants are usable for wayfinding if specific computer vision algorithms are used to select and display appropriate

Blender cycles lighting and rendering cookbook

CERN Document Server

Iraci, Bernardo

2013-01-01

An in-depth guide full of step-by-step recipes to explore the concepts behind the usage of Cycles. Packed with illustrations, and lots of tips and tricks; the easy-to-understand nature of the book will help the reader understand even the most complex concepts with ease.If you are a digital artist who already knows your way around Blender, and you want to learn about the new Cycles' rendering engine, this is the book for you. Even experts will be able to pick up new tips and tricks to make the most of the rendering capabilities of Cycles.

Three-dimensional rendering of segmented object using matlab - biomed 2010.

Science.gov (United States)

Anderson, Jeffrey R; Barrett, Steven F

2010-01-01

The three-dimensional rendering of microscopic objects is a difficult and challenging task that often requires specialized image processing techniques. Previous work has been described of a semi-automatic segmentation process of fluorescently stained neurons collected as a sequence of slice images with a confocal laser scanning microscope. Once properly segmented, each individual object can be rendered and studied as a three-dimensional virtual object. This paper describes the work associated with the design and development of Matlab files to create three-dimensional images from the segmented object data previously mentioned. Part of the motivation for this work is to integrate both the segmentation and rendering processes into one software application, providing a seamless transition from the segmentation tasks to the rendering and visualization tasks. Previously these tasks were accomplished on two different computer systems, windows and Linux. This transition basically limits the usefulness of the segmentation and rendering applications to those who have both computer systems readily available. The focus of this work is to create custom Matlab image processing algorithms for object rendering and visualization, and merge these capabilities to the Matlab files that were developed especially for the image segmentation task. The completed Matlab application will contain both the segmentation and rendering processes in a single graphical user interface, or GUI. This process for rendering three-dimensional images in Matlab requires that a sequence of two-dimensional binary images, representing a cross-sectional slice of the object, be reassembled in a 3D space, and covered with a surface. Additional segmented objects can be rendered in the same 3D space. The surface properties of each object can be varied by the user to aid in the study and analysis of the objects. This inter-active process becomes a powerful visual tool to study and understand microscopic objects.

Real-Time Location-Based Rendering of Urban Underground Pipelines

Directory of Open Access Journals (Sweden)

Wei Li

2018-01-01

Full Text Available The concealment and complex spatial relationships of urban underground pipelines present challenges in managing them. Recently, augmented reality (AR has been a hot topic around the world, because it can enhance our perception of reality by overlaying information about the environment and its objects onto the real world. Using AR, underground pipelines can be displayed accurately, intuitively, and in real time. We analyzed the characteristics of AR and their application in underground pipeline management. We mainly focused on the AR pipeline rendering procedure based on the BeiDou Navigation Satellite System (BDS and simultaneous localization and mapping (SLAM technology. First, in aiming to improve the spatial accuracy of pipeline rendering, we used differential corrections received from the Ground-Based Augmentation System to compute the precise coordinates of users in real time, which helped us accurately retrieve and draw pipelines near the users, and by scene recognition the accuracy can be further improved. Second, in terms of pipeline rendering, we used Visual-Inertial Odometry (VIO to track the rendered objects and made some improvements to visual effects, which can provide steady dynamic tracking of pipelines even in relatively markerless environments and outdoors. Finally, we used the occlusion method based on real-time 3D reconstruction to realistically express the immersion effect of underground pipelines. We compared our methods to the existing methods and concluded that the method proposed in this research improves the spatial accuracy of pipeline rendering and the portability of the equipment. Moreover, the updating of our rendering procedure corresponded with the moving of the user’s location, thus we achieved a dynamic rendering of pipelines in the real environment.

Emission of VOC's from modified rendering process

International Nuclear Information System (INIS)

Bhatti, Z.A.; Raja, I.A.; Saddique, M.; Langenhove, H.V.

2005-01-01

Rendering technique for processing of dead animal and slaughterhouse wastes into valuable products. It involves cooking of raw material and later Sterilization was added to reduce the Bovine Spongiform Encephalopathy (BSE). Studies have been carried out on rendering emission, with the normal cooking process. Our study shows, that the sterilization step in rendering process increases the emission of volatile organic compounds (VOC's). Gas samples, containing VOC's, were analyzed by the GC/MS (Gas Chromatograph and Mass Spectrometry). The most important groups of compounds- alcohols and cyclic hydrocarbons were identified. In the group of alcohol; 1-butanol, l-pentanol and l-hexanol compounds were found while in the group of cyclic hydrocarbon; methyl cyclopentane and cyclohexane compounds were detected. Other groups like aldehyde, sulphur containing compounds, ketone and furan were also found. Some compounds, like l-pentanol, 2-methyl propanal, dimethyl disulfide and dimethyl trisulfide, which belong to these groups, cause malodor. It is important to know these compounds to treat odorous gasses. (author)

A kinesthetic washout filter for force-feedback rendering.

Science.gov (United States)

Danieau, Fabien; Lecuyer, Anatole; Guillotel, Philippe; Fleureau, Julien; Mollet, Nicolas; Christie, Marc

2015-01-01

Today haptic feedback can be designed and associated to audiovisual content (haptic-audiovisuals or HAV). Although there are multiple means to create individual haptic effects, the issue of how to properly adapt such effects on force-feedback devices has not been addressed and is mostly a manual endeavor. We propose a new approach for the haptic rendering of HAV, based on a washout filter for force-feedback devices. A body model and an inverse kinematics algorithm simulate the user's kinesthetic perception. Then, the haptic rendering is adapted in order to handle transitions between haptic effects and to optimize the amplitude of effects regarding the device capabilities. Results of a user study show that this new haptic rendering can successfully improve the HAV experience.

Processing-in-Memory Enabled Graphics Processors for 3D Rendering

Energy Technology Data Exchange (ETDEWEB)

Xie, Chenhao; Song, Shuaiwen; Wang, Jing; Zhang, Weigong; Fu, Xin

2017-02-06

The performance of 3D rendering of Graphics Processing Unit that convents 3D vector stream into 2D frame with 3D image effects significantly impact users’ gaming experience on modern computer systems. Due to the high texture throughput in 3D rendering, main memory bandwidth becomes a critical obstacle for improving the overall rendering performance. 3D stacked memory systems such as Hybrid Memory Cube (HMC) provide opportunities to significantly overcome the memory wall by directly connecting logic controllers to DRAM dies. Based on the observation that texel fetches significantly impact off-chip memory traffic, we propose two architectural designs to enable Processing-In-Memory based GPU for efficient 3D rendering.

RAY TRACING RENDER MENGGUNAKAN FRAGMENT ANTI ALIASING

Directory of Open Access Journals (Sweden)

Febriliyan Samopa

2008-07-01

Full Text Available Normal 0 false false false IN X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Rendering is generating surface and three-dimensional effects on an object displayed on a monitor screen. Ray tracing as a rendering method that traces ray for each image pixel has a drawback, that is, aliasing (jaggies effect. There are some methods for executing anti aliasing. One of those methods is OGSS (Ordered Grid Super Sampling. OGSS is able to perform aliasing well. However, this method requires more computation time since sampling of all pixels in the image will be increased. Fragment Anti Aliasing (FAA is a new alternative method that can cope with the drawback. FAA will check the image when performing rendering to a scene. Jaggies effect is only happened at curve and gradient object. Therefore, only this part of object that will experience sampling magnification. After this sampling magnification and the pixel values are computed, then downsample is performed to retrieve the original pixel values. Experimental results show that the software can implement ray tracing well in order to form images, and it can implement FAA and OGSS technique to perform anti aliasing. In general, rendering using FAA is faster than using OGSS

Digital color acquisition, perception, coding and rendering

CERN Document Server

Fernandez-Maloigne, Christine; Macaire, Ludovic

2013-01-01

In this book the authors identify the basic concepts and recent advances in the acquisition, perception, coding and rendering of color. The fundamental aspects related to the science of colorimetry in relation to physiology (the human visual system) are addressed, as are constancy and color appearance. It also addresses the more technical aspects related to sensors and the color management screen. Particular attention is paid to the notion of color rendering in computer graphics. Beyond color, the authors also look at coding, compression, protection and quality of color images and videos.

Three-dimensional spiral CT during arterial portography: comparison of three rendering techniques.

Science.gov (United States)

Heath, D G; Soyer, P A; Kuszyk, B S; Bliss, D F; Calhoun, P S; Bluemke, D A; Choti, M A; Fishman, E K

1995-07-01

The three most common techniques for three-dimensional reconstruction are surface rendering, maximum-intensity projection (MIP), and volume rendering. Surface-rendering algorithms model objects as collections of geometric primitives that are displayed with surface shading. The MIP algorithm renders an image by selecting the voxel with the maximum intensity signal along a line extended from the viewer's eye through the data volume. Volume-rendering algorithms sum the weighted contributions of all voxels along the line. Each technique has advantages and shortcomings that must be considered during selection of one for a specific clinical problem and during interpretation of the resulting images. With surface rendering, sharp-edged, clear three-dimensional reconstruction can be completed on modest computer systems; however, overlapping structures cannot be visualized and artifacts are a problem. MIP is computationally a fast technique, but it does not allow depiction of overlapping structures, and its images are three-dimensionally ambiguous unless depth cues are provided. Both surface rendering and MIP use less than 10% of the image data. In contrast, volume rendering uses nearly all of the data, allows demonstration of overlapping structures, and engenders few artifacts, but it requires substantially more computer power than the other techniques.

Design and Implementation of High-Performance GIS Dynamic Objects Rendering Engine

Science.gov (United States)

Zhong, Y.; Wang, S.; Li, R.; Yun, W.; Song, G.

2017-12-01

Spatio-temporal dynamic visualization is more vivid than static visualization. It important to use dynamic visualization techniques to reveal the variation process and trend vividly and comprehensively for the geographical phenomenon. To deal with challenges caused by dynamic visualization of both 2D and 3D spatial dynamic targets, especially for different spatial data types require high-performance GIS dynamic objects rendering engine. The main approach for improving the rendering engine with vast dynamic targets relies on key technologies of high-performance GIS, including memory computing, parallel computing, GPU computing and high-performance algorisms. In this study, high-performance GIS dynamic objects rendering engine is designed and implemented for solving the problem based on hybrid accelerative techniques. The high-performance GIS rendering engine contains GPU computing, OpenGL technology, and high-performance algorism with the advantage of 64-bit memory computing. It processes 2D, 3D dynamic target data efficiently and runs smoothly with vast dynamic target data. The prototype system of high-performance GIS dynamic objects rendering engine is developed based SuperMap GIS iObjects. The experiments are designed for large-scale spatial data visualization, the results showed that the high-performance GIS dynamic objects rendering engine have the advantage of high performance. Rendering two-dimensional and three-dimensional dynamic objects achieve 20 times faster on GPU than on CPU.

Haptic rendering for simulation of fine manipulation

CERN Document Server

Wang, Dangxiao; Zhang, Yuru

2014-01-01

This book introduces the latest progress in six degrees of freedom (6-DoF) haptic rendering with the focus on a new approach for simulating force/torque feedback in performing tasks that require dexterous manipulation skills. One of the major challenges in 6-DoF haptic rendering is to resolve the conflict between high speed and high fidelity requirements, especially in simulating a tool interacting with both rigid and deformable objects in a narrow space and with fine features. The book presents a configuration-based optimization approach to tackle this challenge. Addressing a key issue in man

Increased Risks of Upper Tract Urothelial Carcinoma in Male and Female Chinese Herbalists

Directory of Open Access Journals (Sweden)

Hsiao-Yu Yang

2011-03-01

Conclusion: The significant risk of urothelial carcinoma noted in male herbalists increases our suspicion that this is an occupational disease that renders regular health assessment of herbalists an urgent necessity.

GRAPHICS-IMAGE MIXED METHOD FOR LARGE-SCALE BUILDINGS RENDERING

Directory of Open Access Journals (Sweden)

Y. Zhou

2018-05-01

Full Text Available Urban 3D model data is huge and unstructured, LOD and Out-of-core algorithm are usually used to reduce the amount of data that drawn in each frame to improve the rendering efficiency. When the scene is large enough, even the complex optimization algorithm is difficult to achieve better results. Based on the traditional study, a novel idea was developed. We propose a graphics and image mixed method for large-scale buildings rendering. Firstly, the view field is divided into several regions, the graphics-image mixed method used to render the scene on both screen and FBO, then blending the FBO with scree. The algorithm is tested on the huge CityGML model data in the urban areas of New York which contained 188195 public building models, and compared with the Cesium platform. The experiment result shows the system was running smoothly. The experimental results confirm that the algorithm can achieve more massive building scene roaming under the same hardware conditions, and can rendering the scene without vision loss.

Enhancement method for rendered images of home decoration based on SLIC superpixels

Science.gov (United States)

Dai, Yutong; Jiang, Xiaotong

2018-04-01

Rendering technology has been widely used in the home decoration industry in recent years for images of home decoration design. However, due to the fact that rendered images of home decoration design rely heavily on the parameters of renderer and the lights of scenes, most rendered images in this industry require further optimization afterwards. To reduce workload and enhance rendered images automatically, an algorithm utilizing neural networks is proposed in this manuscript. In addition, considering few extreme conditions such as strong sunlight and lights, SLIC superpixels based segmentation is used to choose out these bright areas of an image and enhance them independently. Finally, these chosen areas are merged with the entire image. Experimental results show that the proposed method effectively enhances the rendered images when compared with some existing algorithms. Besides, the proposed strategy is proven to be adaptable especially to those images with obvious bright parts.

Aortic wall damage in mice unable to synthesize ascorbic acid.

Science.gov (United States)

Maeda, N; Hagihara, H; Nakata, Y; Hiller, S; Wilder, J; Reddick, R

2000-01-18

By inactivating the gene for L-gulono-gamma-lactone oxidase, a key enzyme in ascorbic acid synthesis, we have generated mice that, like humans, depend on dietary vitamin C. Regular chow, containing about 110 mg/kg of vitamin C, is unable to support the growth of the mutant mice, which require L-ascorbic acid supplemented in their drinking water (330 mg/liter). Upon withdrawal of supplementation, plasma and tissue ascorbic acid levels decreased to 10-15% of normal within 2 weeks, and after 5 weeks the mutants became anemic, began to lose weight, and die. Plasma total antioxidative capacities were approximately 37% normal in homozygotes after feeding the unsupplemented diet for 3-5 weeks. As plasma ascorbic acid decreased, small, but significant, increases in total cholesterol and decreases in high density lipoprotein cholesterol were observed. The most striking effects of the marginal dietary vitamin C were alterations in the wall of aorta, evidenced by the disruption of elastic laminae, smooth muscle cell proliferation, and focal endothelial desquamation of the luminal surface. Thus, marginal vitamin C deficiency affects the vascular integrity of mice unable to synthesize ascorbic acid, with potentially profound effects on the pathogenesis of vascular diseases. Breeding the vitamin C-dependent mice with mice carrying defined genetic mutations will provide numerous opportunities for systematic studies of the role of antioxidants in health and disease.

View compensated compression of volume rendered images for remote visualization.

Science.gov (United States)

Lalgudi, Hariharan G; Marcellin, Michael W; Bilgin, Ali; Oh, Han; Nadar, Mariappan S

2009-07-01

Remote visualization of volumetric images has gained importance over the past few years in medical and industrial applications. Volume visualization is a computationally intensive process, often requiring hardware acceleration to achieve a real time viewing experience. One remote visualization model that can accomplish this would transmit rendered images from a server, based on viewpoint requests from a client. For constrained server-client bandwidth, an efficient compression scheme is vital for transmitting high quality rendered images. In this paper, we present a new view compensation scheme that utilizes the geometric relationship between viewpoints to exploit the correlation between successive rendered images. The proposed method obviates motion estimation between rendered images, enabling significant reduction to the complexity of a compressor. Additionally, the view compensation scheme, in conjunction with JPEG2000 performs better than AVC, the state of the art video compression standard.

Real-time volume rendering of digital medical images on an iOS device

Science.gov (United States)

Noon, Christian; Holub, Joseph; Winer, Eliot

2013-03-01

Performing high quality 3D visualizations on mobile devices, while tantalizingly close in many areas, is still a quite difficult task. This is especially true for 3D volume rendering of digital medical images. Allowing this would empower medical personnel a powerful tool to diagnose and treat patients and train the next generation of physicians. This research focuses on performing real time volume rendering of digital medical images on iOS devices using custom developed GPU shaders for orthogonal texture slicing. An interactive volume renderer was designed and developed with several new features including dynamic modification of render resolutions, an incremental render loop, a shader-based clipping algorithm to support OpenGL ES 2.0, and an internal backface culling algorithm for properly sorting rendered geometry with alpha blending. The application was developed using several application programming interfaces (APIs) such as OpenSceneGraph (OSG) as the primary graphics renderer coupled with iOS Cocoa Touch for user interaction, and DCMTK for DICOM I/O. The developed application rendered volume datasets over 450 slices up to 50-60 frames per second, depending on the specific model of the iOS device. All rendering is done locally on the device so no Internet connection is required.

Able or unable to work? Life trajectory after severe occupational injury.

Science.gov (United States)

Kulmala, Jarna; Luoma, Arto; Koskinen, Lasse

2018-04-24

To study the probabilities and permanence of return to work, inability to work and rehabilitation, and to explore the connection between these life situations and later working after a severe occupational injury. A historical cohort of Finnish workers with a severe occupational injury during 2008 (N = 11,585) were followed up annually on the outcomes of return to work over a 5-year observation period. We examined transition probabilities from one life situation to another with Markov chain analysis, and applied logistic regression with generalized estimating equations to assess the effect of register-based determinants on return to work. Within the five anniversaries, 85% of the injured were working, 9% were unable to work (fully or partly) and 2% received rehabilitation. Age, gross annual income, type of work, injured body part, injury type and the injured's annual condition subsequent to the work injury were significant determinants of return to work. The probability of return to work decreased with time, but, on average, one-fifth of the injured workers succeeded in return to work after being unable to work on the previous anniversary, which indicates that it is worthwhile to conduct efforts for this target group in order to promote return to work. Implications for Rehabilitation The current life situation of the injured should be taken into account when promoting return to work, as it is a strong predictor of later working after a serious occupational injury. Rehabilitation and return to work programs should start in time due to declining return to work rates as the disability continues. Return to work on a part-time basis could be a good option during the early phases of recovery, since a notable proportion of those partly unable to work on the first anniversary returned later to full-time workers. The probability of recovery is relatively high even for those with long-term disabilities, so the promotion of return to work is highly recommended also for

Method and system for rendering and interacting with an adaptable computing environment

Science.gov (United States)

Osbourn, Gordon Cecil [Albuquerque, NM; Bouchard, Ann Marie [Albuquerque, NM

2012-06-12

An adaptable computing environment is implemented with software entities termed "s-machines", which self-assemble into hierarchical data structures capable of rendering and interacting with the computing environment. A hierarchical data structure includes a first hierarchical s-machine bound to a second hierarchical s-machine. The first hierarchical s-machine is associated with a first layer of a rendering region on a display screen and the second hierarchical s-machine is associated with a second layer of the rendering region overlaying at least a portion of the first layer. A screen element s-machine is linked to the first hierarchical s-machine. The screen element s-machine manages data associated with a screen element rendered to the display screen within the rendering region at the first layer.

Integral image rendering procedure for aberration correction and size measurement.

Science.gov (United States)

Sommer, Holger; Ihrig, Andreas; Ebenau, Melanie; Flühs, Dirk; Spaan, Bernhard; Eichmann, Marion

2014-05-20

The challenge in rendering integral images is to use as much information preserved by the light field as possible to reconstruct a captured scene in a three-dimensional way. We propose a rendering algorithm based on the projection of rays through a detailed simulation of the optical path, considering all the physical properties and locations of the optical elements. The rendered images contain information about the correct size of imaged objects without the need to calibrate the imaging device. Additionally, aberrations of the optical system may be corrected, depending on the setup of the integral imaging device. We show simulation data that illustrates the aberration correction ability and experimental data from our plenoptic camera, which illustrates the capability of our proposed algorithm to measure size and distance. We believe this rendering procedure will be useful in the future for three-dimensional ophthalmic imaging of the human retina.

Aortic wall damage in mice unable to synthesize ascorbic acid

OpenAIRE

Maeda, Nobuyo; Hagihara, Hiroyuki; Nakata, Yukiko; Hiller, Sylvia; Wilder, Jennifer; Reddick, Robert

2000-01-01

By inactivating the gene for l-gulono-γ-lactone oxidase, a key enzyme in ascorbic acid synthesis, we have generated mice that, like humans, depend on dietary vitamin C. Regular chow, containing about 110 mg/kg of vitamin C, is unable to support the growth of the mutant mice, which require l-ascorbic acid supplemented in their drinking water (330 mg/liter). Upon withdrawal of supplementation, plasma and tissue ascorbic acid levels decreased to 10–15% of normal within 2 weeks, and after 5 weeks...

Light Field Rendering for Head Mounted Displays using Pixel Reprojection

DEFF Research Database (Denmark)

Hansen, Anne Juhler; Klein, Jákup; Kraus, Martin

2017-01-01

Light field displays have advantages over traditional stereoscopic head mounted displays, for example, because they can overcome the vergence-accommodation conflict. However, rendering light fields can be a heavy task for computers due to the number of images that have to be rendered. Since much ...

Architecture for high performance stereoscopic game rendering on Android

Science.gov (United States)

Flack, Julien; Sanderson, Hugh; Shetty, Sampath

2014-03-01

Stereoscopic gaming is a popular source of content for consumer 3D display systems. There has been a significant shift in the gaming industry towards casual games for mobile devices running on the Android™ Operating System and driven by ARM™ and other low power processors. Such systems are now being integrated directly into the next generation of 3D TVs potentially removing the requirement for an external games console. Although native stereo support has been integrated into some high profile titles on established platforms like Windows PC and PS3 there is a lack of GPU independent 3D support for the emerging Android platform. We describe a framework for enabling stereoscopic 3D gaming on Android for applications on mobile devices, set top boxes and TVs. A core component of the architecture is a 3D game driver, which is integrated into the Android OpenGL™ ES graphics stack to convert existing 2D graphics applications into stereoscopic 3D in real-time. The architecture includes a method of analyzing 2D games and using rule based Artificial Intelligence (AI) to position separate objects in 3D space. We describe an innovative stereo 3D rendering technique to separate the views in the depth domain and render directly into the display buffer. The advantages of the stereo renderer are demonstrated by characterizing the performance in comparison to more traditional render techniques, including depth based image rendering, both in terms of frame rates and impact on battery consumption.

Extreme Simplification and Rendering of Point Sets using Algebraic Multigrid

NARCIS (Netherlands)

Reniers, Dennie; Telea, Alexandru

2005-01-01

We present a novel approach for extreme simplification of point set models in the context of real-time rendering. Point sets are often rendered using simple point primitives, such as oriented discs. However efficient, simple primitives are less effective in approximating large surface areas. A large

Clinical application of the helical CT in patients who are unable to hold their breath

International Nuclear Information System (INIS)

Toyama, Yoshihiro; Kimura, Naruhide; Ohkawa, Motoomi; Tanabe, Masatada.

1997-01-01

We performed helical CT in eighteen patients who were unable to hold their breath for 10 chest and 8 abdominal regions. Although there were respiratory artifacts in three cases, we could obtain the useful clinical information in all cases. In our experimental examinations, CT value of the phantom by helical scan was lower than that by conventional scan without movement of the phantom. With movement of it, the CT value was further lowered by either scan method, but the lowered rate was smaller by helical scan as the movement becomes faster. We consider that helical CT can be applied to patients who were unable to hold their breath. (author)

Usefulness of PC based 3D volume rendering technique in the evaluation of suspected aneurysm on brain MRA

International Nuclear Information System (INIS)

Baek, Seung Il; Lee, Ghi Jai; Shim, Jae Chan; Bang, Sun Woo; Ryu, Seok Jong; Kim, Ho Kyun

2002-01-01

To evaluated usefulness of volume rending technique using 3D visualization software on PC in patients with suspected intracranial aneurysm on brain MRA. We analyzed prospectively 21 patients with suspected aneurysms on the routine MIP images which were obtained 15 .deg. C increment along axial and sagittal plane, among 135 patients in whom brain MRA was done due to stroke symptoms for recent 5 months. The locations were the anterior communicating artery (A-com) in 8 patients, the posterior communicating artery (P-com) in 3, the ICA bifurcation in 5, the MCA bifurcation in 4, and the basilar tip in one. Male to female ratio was 14:7 and mean age was 62 years. MRA source images were sent to PC through LAN, and the existence of aneurysm was evaluated with volume rendering technique using 3D visualization software on PC. The presence or absence of aneurysm on MIP and volume rendering images was decided by the consensus of two radiologists. We found the aneurysms with volume rendering technique, from 1 patient among 8 patients with suspected aneurysm at A-com and also 1 patient among 3 patients with suspected aneurysm at P=com on routine MIP images. Confirmative angiography and interventional procedures were done in these 2 patients. The causes for mimicking the aneurysm on MIP were flow displacement artifact in 9, normal P-com infundibulum in 2, and overlapped or narrowed vessels in 8 patients, and among them confirmative angiography was done in 2 patient. Volume rendering technique using visualization software on PC is useful to scrutinize the suspected aneurysm on routine MIP images and to avoid further invasive angiography

Color-coded volume rendering for three-dimensional reconstructions of CT data

International Nuclear Information System (INIS)

Rieker, O.; Mildenberger, P.; Thelen, M.

1999-01-01

Purpose: To evaluate a technique of colored three-dimensional reconstructions without segmentation. Material and methods: Color-coded volume rendered images were reconstructed from the volume data of 25 thoracic, abdominal, musculoskeletal, and vascular helical CT scans using commercial software. The CT volume rendered voxels were encoded with color in the following manner. Opacity, hue, lightness, and chroma were assigned to each of four classes defined by CT number. Color-coded reconstructions were compared to the corresponding grey-scale coded reconstructions. Results: Color-coded volume rendering enabled realistic visualization of pathologic findings when there was sufficient difference in CT density. Segmentation was necessary in some cases to demonstrate small details in a complex volume. Conclusion: Color-coded volume rendering allowed lifelike visualisation of CT volumes without the need of segmentation in most cases. (orig.) [de

Physically-Based Rendering of Particle-Based Fluids with Light Transport Effects

Science.gov (United States)

Beddiaf, Ali; Babahenini, Mohamed Chaouki

2018-03-01

Recent interactive rendering approaches aim to efficiently produce images. However, time constraints deeply affect their output accuracy and realism (many light phenomena are poorly or not supported at all). To remedy this issue, in this paper, we propose a physically-based fluid rendering approach. First, while state-of-the-art methods focus on isosurface rendering with only two refractions, our proposal (1) considers the fluid as a heterogeneous participating medium with refractive boundaries, and (2) supports both multiple refractions and scattering. Second, the proposed solution is fully particle-based in the sense that no particles transformation into a grid is required. This interesting feature makes it able to handle many particle types (water, bubble, foam, and sand). On top of that, a medium with different fluids (color, phase function, etc.) can also be rendered.

Hybrid male sterility between Drosophila willistoni species is caused by male failure to transfer sperm during copulation.

Science.gov (United States)

Civetta, Alberto; Gaudreau, Chelsea

2015-05-01

The biological concept of species stresses the importance of understanding what mechanisms maintain species reproductively isolated from each other. Often such mechanisms are divided into premating and postmating, with the latest being the result of either prezygotic or postzygotic isolation barriers. Drosophila willistoni quechua and Drosophila willistoni willistoni are two subspecies that experience reproductive isolation. When a D. w. quechua female is crossed with a D. w. willistoni male, the hybrid males (F1QW) are unable to father progeny; however, the reciprocal cross produces fertile hybrids. Thus, the mechanism of isolation is unidirectional hybrid male sterility. However, the sterile F1QW males contain large amounts of motile sperm. Here we explore whether pre-copulatory or post-copulatory pre-zygotic mechanisms serve as major deterrents in the ability of F1QW males to father progeny. Comparisons of parental and hybrid males copulation durations showed no significant reduction in copulation duration of F1QW males. Interrupted copulations of the parental species confirmed that sperm transfer occurs before the minimum copulation duration registered for F1QW males. However, we found that when females mate with F1QW males, sperm is not present inside the female storage organs and that the lack of sperm in storage is due to failure to transfer sperm rather than spillage or active sperm dumping by females. Sterility of F1QW hybrid males is primarily driven by their inability to transfer sperm during copulation.

The evolution of postpairing male mate choice.

Science.gov (United States)

Lyu, Nan; Servedio, Maria R; Lloyd, Huw; Sun, Yue-Hua

2017-06-01

An increasing number of empirical studies in animals have demonstrated male mate choice. However, little is known about the evolution of postpairing male choice, specifically which occurs by differential allocation of male parental care in response to female signals. We use a population genetic model to examine whether such postpairing male mate choice can evolve when males face a trade-off between parental care and extra-pair copulations (EPCs). Specifically, we assume that males allocate more effort to providing parental care when mated to preferred (signaling) females, but they are then unable to allocate additional effort to seek EPCs. We find that both male preference and female signaling can evolve in this situation, under certain conditions. First, this evolution requires a relatively large difference in parental investment between males mated to preferred versus nonpreferred females. Second, whether male choice and female signaling alleles become fixed in a population versus cycle in their frequencies depends on the additional fecundity benefits from EPCs that are gained by choosy males. Third, less costly female signals enable both signaling and choice alleles to evolve under more relaxed conditions. Our results also provide a new insight into the evolution of sexual conflict over parental care. © 2017 The Author(s). Evolution published by Wiley Periodicals, Inc. on behalf of The Society for the Study of Evolution.

An improved method of continuous LOD based on fractal theory in terrain rendering

Science.gov (United States)

Lin, Lan; Li, Lijun

2007-11-01

With the improvement of computer graphic hardware capability, the algorithm of 3D terrain rendering is going into the hot topic of real-time visualization. In order to solve conflict between the rendering speed and reality of rendering, this paper gives an improved method of terrain rendering which improves the traditional continuous level of detail technique based on fractal theory. This method proposes that the program needn't to operate the memory repeatedly to obtain different resolution terrain model, instead, obtains the fractal characteristic parameters of different region according to the movement of the viewpoint. Experimental results show that the method guarantees the authenticity of landscape, and increases the real-time 3D terrain rendering speed.

High Fidelity Haptic Rendering

CERN Document Server

Otaduy, Miguel A

2006-01-01

The human haptic system, among all senses, provides unique and bidirectional communication between humans and their physical environment. Yet, to date, most human-computer interactive systems have focused primarily on the graphical rendering of visual information and, to a lesser extent, on the display of auditory information. Extending the frontier of visual computing, haptic interfaces, or force feedback devices, have the potential to increase the quality of human-computer interaction by accommodating the sense of touch. They provide an attractive augmentation to visual display and enhance t

On the design of a real-time volume rendering engine

NARCIS (Netherlands)

Smit, Jaap; Wessels, H.L.F.; van der Horst, A.; Bentum, Marinus Jan

1992-01-01

An architecture for a Real-Time Volume Rendering Engine (RT-VRE) is given, capable of computing 750 × 750 × 512 samples from a 3D dataset at a rate of 25 images per second. The RT-VRE uses for this purpose 64 dedicated rendering chips, cooperating with 16 RISC-processors. A plane interpolator

On the design of a real-time volume rendering engine

NARCIS (Netherlands)

Smit, Jaap; Wessels, H.J.; van der Horst, A.; Bentum, Marinus Jan

1995-01-01

An architecture for a Real-Time Volume Rendering Engine (RT-VRE) is given, capable of computing 750 × 750 × 512 samples from a 3D dataset at a rate of 25 images per second. The RT-VRE uses for this purpose 64 dedicated rendering chips, cooperating with 16 RISC-processors. A plane interpolator

Simulation and training of lumbar punctures using haptic volume rendering and a 6DOF haptic device

Science.gov (United States)

Färber, Matthias; Heller, Julika; Handels, Heinz

2007-03-01

The lumbar puncture is performed by inserting a needle into the spinal chord of the patient to inject medicaments or to extract liquor. The training of this procedure is usually done on the patient guided by experienced supervisors. A virtual reality lumbar puncture simulator has been developed in order to minimize the training costs and the patient's risk. We use a haptic device with six degrees of freedom (6DOF) to feedback forces that resist needle insertion and rotation. An improved haptic volume rendering approach is used to calculate the forces. This approach makes use of label data of relevant structures like skin, bone, muscles or fat and original CT data that contributes information about image structures that can not be segmented. A real-time 3D visualization with optional stereo view shows the punctured region. 2D visualizations of orthogonal slices enable a detailed impression of the anatomical context. The input data consisting of CT and label data and surface models of relevant structures is defined in an XML file together with haptic rendering and visualization parameters. In a first evaluation the visible human male data has been used to generate a virtual training body. Several users with different medical experience tested the lumbar puncture trainer. The simulator gives a good haptic and visual impression of the needle insertion and the haptic volume rendering technique enables the feeling of unsegmented structures. Especially, the restriction of transversal needle movement together with rotation constraints enabled by the 6DOF device facilitate a realistic puncture simulation.

Functionality and Performance Visualization of the Distributed High Quality Volume Renderer (HVR)

KAUST Repository

Shaheen, Sara

2012-07-01

Volume rendering systems are designed to provide means to enable scientists and a variety of experts to interactively explore volume data through 3D views of the volume. However, volume rendering techniques are computationally intensive tasks. Moreover, parallel distributed volume rendering systems and multi-threading architectures were suggested as natural solutions to provide an acceptable volume rendering performance for very large volume data sizes, such as Electron Microscopy data (EM). This in turn adds another level of complexity when developing and manipulating volume rendering systems. Given that distributed parallel volume rendering systems are among the most complex systems to develop, trace and debug, it is obvious that traditional debugging tools do not provide enough support. As a consequence, there is a great demand to provide tools that are able to facilitate the manipulation of such systems. This can be achieved by utilizing the power of compute graphics in designing visual representations that reflect how the system works and that visualize the current performance state of the system.The work presented is categorized within the field of software Visualization, where Visualization is used to serve visualizing and understanding various software. In this thesis, a number of visual representations that reflect a number of functionality and performance aspects of the distributed HVR, a high quality volume renderer system that uses various techniques to visualize large volume sizes interactively. This work is provided to visualize different stages of the parallel volume rendering pipeline of HVR. This is along with means of performance analysis through a number of flexible and dynamic visualizations that reflect the current state of the system and enables manipulation of them at runtime. Those visualization are aimed to facilitate debugging, understanding and analyzing the distributed HVR.

Fast rendering of scanned room geometries

DEFF Research Database (Denmark)

Olesen, Søren Krarup; Markovic, Milos; Hammershøi, Dorte

2014-01-01

Room acoustics are rendered in Virtual Realities based on models of the real world. These are typically rather coarse representations of the true geometry resulting in room impulse responses with a lack of natural detail. This problem can be overcome by using data scanned by sensors, such as e...

On-the-fly generation and rendering of infinite cities on the GPU

KAUST Repository

Steinberger, Markus

2014-05-01

In this paper, we present a new approach for shape-grammar-based generation and rendering of huge cities in real-time on the graphics processing unit (GPU). Traditional approaches rely on evaluating a shape grammar and storing the geometry produced as a preprocessing step. During rendering, the pregenerated data is then streamed to the GPU. By interweaving generation and rendering, we overcome the problems and limitations of streaming pregenerated data. Using our methods of visibility pruning and adaptive level of detail, we are able to dynamically generate only the geometry needed to render the current view in real-time directly on the GPU. We also present a robust and efficient way to dynamically update a scene\\'s derivation tree and geometry, enabling us to exploit frame-to-frame coherence. Our combined generation and rendering is significantly faster than all previous work. For detailed scenes, we are capable of generating geometry more rapidly than even just copying pregenerated data from main memory, enabling us to render cities with thousands of buildings at up to 100 frames per second, even with the camera moving at supersonic speed. © 2014 The Author(s) Computer Graphics Forum © 2014 The Eurographics Association and John Wiley & Sons Ltd. Published by John Wiley & Sons Ltd.

On-the-fly generation and rendering of infinite cities on the GPU

KAUST Repository

Steinberger, Markus; Kenzel, Michael; Kainz, Bernhard K.; Wonka, Peter; Schmalstieg, Dieter

2014-01-01

In this paper, we present a new approach for shape-grammar-based generation and rendering of huge cities in real-time on the graphics processing unit (GPU). Traditional approaches rely on evaluating a shape grammar and storing the geometry produced as a preprocessing step. During rendering, the pregenerated data is then streamed to the GPU. By interweaving generation and rendering, we overcome the problems and limitations of streaming pregenerated data. Using our methods of visibility pruning and adaptive level of detail, we are able to dynamically generate only the geometry needed to render the current view in real-time directly on the GPU. We also present a robust and efficient way to dynamically update a scene's derivation tree and geometry, enabling us to exploit frame-to-frame coherence. Our combined generation and rendering is significantly faster than all previous work. For detailed scenes, we are capable of generating geometry more rapidly than even just copying pregenerated data from main memory, enabling us to render cities with thousands of buildings at up to 100 frames per second, even with the camera moving at supersonic speed. © 2014 The Author(s) Computer Graphics Forum © 2014 The Eurographics Association and John Wiley & Sons Ltd. Published by John Wiley & Sons Ltd.

Democratizing rendering for multiple viewers in surround VR systems

KAUST Repository

Schulze, Jü rgen P.; Acevedo-Feliz, Daniel; Mangan, John; Prudhomme, Andrew; Nguyen, Phi Khanh; Weber, Philip P.

2012-01-01

We present a new approach for how multiple users' views can be rendered in a surround virtual environment without using special multi-view hardware. It is based on the idea that different parts of the screen are often viewed by different users, so that they can be rendered from their own view point, or at least from a point closer to their view point than traditionally expected. The vast majority of 3D virtual reality systems are designed for one head-tracked user, and a number of passive viewers. Only the head tracked user gets to see the correct view of the scene, everybody else sees a distorted image. We reduce this problem by algorithmically democratizing the rendering view point among all tracked users. Researchers have proposed solutions for multiple tracked users, but most of them require major changes to the display hardware of the VR system, such as additional projectors or custom VR glasses. Our approach does not require additional hardware, except the ability to track each participating user. We propose three versions of our multi-viewer algorithm. Each of them balances image distortion and frame rate in different ways, making them more or less suitable for certain application scenarios. Our most sophisticated algorithm renders each pixel from its own, optimized camera perspective, which depends on all tracked users' head positions and orientations. © 2012 IEEE.

Democratizing rendering for multiple viewers in surround VR systems

KAUST Repository

Schulze, Jürgen P.

2012-03-01

We present a new approach for how multiple users\\' views can be rendered in a surround virtual environment without using special multi-view hardware. It is based on the idea that different parts of the screen are often viewed by different users, so that they can be rendered from their own view point, or at least from a point closer to their view point than traditionally expected. The vast majority of 3D virtual reality systems are designed for one head-tracked user, and a number of passive viewers. Only the head tracked user gets to see the correct view of the scene, everybody else sees a distorted image. We reduce this problem by algorithmically democratizing the rendering view point among all tracked users. Researchers have proposed solutions for multiple tracked users, but most of them require major changes to the display hardware of the VR system, such as additional projectors or custom VR glasses. Our approach does not require additional hardware, except the ability to track each participating user. We propose three versions of our multi-viewer algorithm. Each of them balances image distortion and frame rate in different ways, making them more or less suitable for certain application scenarios. Our most sophisticated algorithm renders each pixel from its own, optimized camera perspective, which depends on all tracked users\\' head positions and orientations. © 2012 IEEE.

Use of volume-rendered images in registration of nuclear medicine studies

International Nuclear Information System (INIS)

Wallis, J.W.; Miller, T.R.; Hsu, S.S.

1995-01-01

A simple operator-guided alignment technique based on volume-rendered images was developed to register tomographic nuclear medicine studies. For each of 2 three-dimensional data sets to be registered, volume-rendered images were generated in 3 orthogonal projections (x,y,z) using the method of maximum-activity projection. Registration was achieved as follows: (a) One of the rendering orientations (e.g. x) was chosen for manipulation; (b) The two dimensional rendering was translated and rotated under operator control to achieve the best alignment as determined by visual assessment; (c) This rotation and translation was then applied to the underlying three-dimensional data set, with updating of the rendered images in each of the orthogonal projections; (d) Another orientation was chosen, and the process repeated. Since manipulation was performed on the small two-dimensional rendered image, feedback was instantaneous. To aid in the visual alignment, difference images and flicker images (toggling between the two data sets) were displayed. Accuracy was assessed by analysis of separate clinical data sets acquired without patient movement. After arbitrary rotation and translation of one of the two data sets, the 2 data sets were registered. Mean registration error was 0.36 pixels, corresponding to a 2.44 mm registration error. Thus, accurate registration can be achieved in under 10 minutes using this simple technique. The accuracy of registration was assessed with use of duplicate SPECT studies originating from separate reconstructions of the data from each of the detectors of a triple-head gamma camera

Mucosal detail at CT virtual reality: surface versus volume rendering.

Science.gov (United States)

Hopper, K D; Iyriboz, A T; Wise, S W; Neuman, J D; Mauger, D T; Kasales, C J

2000-02-01

To evaluate computed tomographic virtual reality with volumetric versus surface rendering. Virtual reality images were reconstructed for 27 normal or pathologic colonic, gastric, or bronchial structures in four ways: the transition zone (a) reconstructed separately from the wall by using volume rendering; (b) with attenuation equal to air; (c) with attenuation equal to wall (soft tissue); (d) with attenuation halfway between air and wall. The four reconstructed images were randomized. Four experienced imagers blinded to the reconstruction graded them from best to worst with predetermined criteria. All readers rated images with the transition zone as a separate structure as overwhelmingly superior (P Virtual reality is best with volume rendering, with the transition zone (mucosa) between the wall and air reconstructed as a separate structure.

Method of producing hydrogen, and rendering a contaminated biomass inert

Science.gov (United States)

Bingham, Dennis N [Idaho Falls, ID; Klingler, Kerry M [Idaho Falls, ID; Wilding, Bruce M [Idaho Falls, ID

2010-02-23

A method for rendering a contaminated biomass inert includes providing a first composition, providing a second composition, reacting the first and second compositions together to form an alkaline hydroxide, providing a contaminated biomass feedstock and reacting the alkaline hydroxide with the contaminated biomass feedstock to render the contaminated biomass feedstock inert and further producing hydrogen gas, and a byproduct that includes the first composition.

40 CFR 80.995 - What if a refiner or importer is unable to produce gasoline conforming to the requirements of...

Science.gov (United States)

2010-07-01

... unable to produce gasoline conforming to the requirements of this subpart? 80.995 Section 80.995... FUELS AND FUEL ADDITIVES Gasoline Toxics Exemptions § 80.995 What if a refiner or importer is unable to produce gasoline conforming to the requirements of this subpart? In appropriate extreme and unusual...

40 CFR 80.374 - What if a refiner or importer is unable to produce gasoline conforming to the requirements of...

Science.gov (United States)

2010-07-01

... unable to produce gasoline conforming to the requirements of this subpart? 80.374 Section 80.374... FUELS AND FUEL ADDITIVES Gasoline Sulfur Exemptions § 80.374 What if a refiner or importer is unable to produce gasoline conforming to the requirements of this subpart? In appropriate extreme and unusual...

Stereotype Threat, Gender-Role Conformity, and New Zealand Adolescent Males in Choirs

Science.gov (United States)

Watson, Penelope; Rubie-Davies, Christine Margaret; Hattie, John Allan

2017-01-01

Choirs have been stereotypically gendered feminine in many national contexts. When gender-role conformity has been expected in such settings, male choral participation and performance has often been rendered gender incongruent and consequently threatening. Gender stereotype threat was explored as a factor which might instigate a potentially…

Rendering Visible: Painting and Sexuate Subjectivity

Science.gov (United States)

Daley, Linda

2015-01-01

In this essay, I examine Luce Irigaray's aesthetic of sexual difference, which she develops by extrapolating from Paul Klee's idea that the role of painting is to render the non-visible rather than represent the visible. This idea is the premise of her analyses of phenomenology and psychoanalysis and their respective contributions to understanding…

Free-viewpoint depth image based rendering

NARCIS (Netherlands)

Zinger, S.; Do, Q.L.; With, de P.H.N.

2010-01-01

In 3D TV research, one approach is to employ multiple cameras for creating a 3D multi-view signal with the aim to make interactive free-viewpoint selection possible in 3D TV media. This paper explores a new rendering algorithm that enables to compute a free-viewpoint between two reference views from

Influence of rendering methods on yield and quality of chicken fat recovered from broiler skin

Directory of Open Access Journals (Sweden)

Liang-Kun Lin

2017-06-01

Full Text Available Objective In order to utilize fat from broiler byproducts efficiently, it is necessary to develop an appropriate rendering procedure and establish quality information for the rendered fat. A study was therefore undertaken to evaluate the influence of rendering methods on the amounts and general properties of the fat recovered from broiler skin. Methods The yield and quality of the broiler skin fat rendered through high and lower energy microwave rendering (3.6 W/g for 10 min and 2.4 W/g for 10 min for high power microwave rendering (HPMR and high power microwave rendering (LPMR, respectively, oven baking (OB, at 180°C for 40 min, and water cooking (WC, boiling for 40 min were compared. Results Microwave-rendered skin exhibited the highest yields and fat recovery rates, followed by OB, and WC fats (p<0.05. HPMR fat had the highest L*, a*, and b* values, whereas WC fat had the highest moisture content, acid values, and thiobarbituric acid (TBA values (p<0.05. There was no significant difference in the acid value, peroxide value, and TBA values between HPMR and LPMR fats. Conclusion Microwave rendering at a power level of 3.6 W/g for 10 min is suggested base on the yield and quality of chicken fat.

Beaming teaching application: recording techniques for spatial xylophone sound rendering

DEFF Research Database (Denmark)

Markovic, Milos; Madsen, Esben; Olesen, Søren Krarup

2012-01-01

BEAMING is a telepresence research project aiming at providing a multimodal interaction between two or more participants located at distant locations. One of the BEAMING applications allows a distant teacher to give a xylophone playing lecture to the students. Therefore, rendering of the xylophon...... to spatial improvements mainly in terms of the Apparent Source Width (ASW). Rendered examples are subjectively evaluated in listening tests by comparing them with binaural recording....

Chromium Renderserver: Scalable and Open Source Remote RenderingInfrastructure

Energy Technology Data Exchange (ETDEWEB)

Paul, Brian; Ahern, Sean; Bethel, E. Wes; Brugger, Eric; Cook,Rich; Daniel, Jamison; Lewis, Ken; Owen, Jens; Southard, Dale

2007-12-01

Chromium Renderserver (CRRS) is software infrastructure thatprovides the ability for one or more users to run and view image outputfrom unmodified, interactive OpenGL and X11 applications on a remote,parallel computational platform equipped with graphics hardwareaccelerators via industry-standard Layer 7 network protocolsand clientviewers. The new contributions of this work include a solution to theproblem of synchronizing X11 and OpenGL command streams, remote deliveryof parallel hardware-accelerated rendering, and a performance analysis ofseveral different optimizations that are generally applicable to avariety of rendering architectures. CRRSis fully operational, Open Sourcesoftware.

A point-based rendering approach for real-time interaction on mobile devices

Institute of Scientific and Technical Information of China (English)

LIANG XiaoHui; ZHAO QinPing; HE ZhiYing; XIE Ke; LIU YuBo

2009-01-01

Mobile device is an Important interactive platform. Due to the limitation of computation, memory, display area and energy, how to realize the efficient and real-time interaction of 3D models based on mobile devices is an important research topic. Considering features of mobile devices, this paper adopts remote rendering mode and point models, and then, proposes a transmission and rendering approach that could interact in real time. First, improved simplification algorithm based on MLS and display resolution of mobile devices is proposed. Then, a hierarchy selection of point models and a QoS transmission control strategy are given based on interest area of operator, interest degree of object in the virtual environment and rendering error. They can save the energy consumption. Finally, the rendering and interaction of point models are completed on mobile devices. The experiments show that our method is efficient.

Depth of Field Effects for Interactive Direct Volume Rendering

KAUST Repository

Schott, Mathias; Pascal Grosset, A.V.; Martin, Tobias; Pegoraro, Vincent; Smith, Sean T.; Hansen, Charles D.

2011-01-01

In this paper, a method for interactive direct volume rendering is proposed for computing depth of field effects, which previously were shown to aid observers in depth and size perception of synthetically generated images. The presented technique extends those benefits to volume rendering visualizations of 3D scalar fields from CT/MRI scanners or numerical simulations. It is based on incremental filtering and as such does not depend on any precomputation, thus allowing interactive explorations of volumetric data sets via on-the-fly editing of the shading model parameters or (multi-dimensional) transfer functions. © 2011 The Author(s).

Depth of Field Effects for Interactive Direct Volume Rendering

KAUST Repository

Schott, Mathias

2011-06-01

In this paper, a method for interactive direct volume rendering is proposed for computing depth of field effects, which previously were shown to aid observers in depth and size perception of synthetically generated images. The presented technique extends those benefits to volume rendering visualizations of 3D scalar fields from CT/MRI scanners or numerical simulations. It is based on incremental filtering and as such does not depend on any precomputation, thus allowing interactive explorations of volumetric data sets via on-the-fly editing of the shading model parameters or (multi-dimensional) transfer functions. © 2011 The Author(s).

Anisotropic 3D texture synthesis with application to volume rendering

DEFF Research Database (Denmark)

Laursen, Lasse Farnung; Ersbøll, Bjarne Kjær; Bærentzen, Jakob Andreas

2011-01-01

images using a 12.1 megapixel camera. Next, we extend the volume rendering pipeline by creating a transfer function which yields not only color and opacity from the input intensity, but also texture coordinates for our synthesized 3D texture. Thus, we add texture to the volume rendered images....... This method is applied to a high quality visualization of a pig carcass, where samples of meat, bone, and fat have been used to produce the anisotropic 3D textures....

Graphical User Interfaces for Volume Rendering Applications in Medical Imaging

OpenAIRE

Lindfors, Lisa; Lindmark, Hanna

2002-01-01

Volume rendering applications are used in medical imaging in order to facilitate the analysis of three-dimensional image data. This study focuses on how to improve the usability of graphical user interfaces of these systems, by gathering user requirements. This is achieved by evaluations of existing systems, together with interviews and observations at clinics in Sweden that use volume rendering to some extent. The usability of the applications of today is not sufficient, according to the use...

Clustered deep shadow maps for integrated polyhedral and volume rendering

KAUST Repository

Bornik, Alexander

2012-01-01

This paper presents a hardware-accelerated approach for shadow computation in scenes containing both complex volumetric objects and polyhedral models. Our system is the first hardware accelerated complete implementation of deep shadow maps, which unifies the computation of volumetric and geometric shadows. Up to now such unified computation was limited to software-only rendering . Previous hardware accelerated techniques can handle only geometric or only volumetric scenes - both resulting in the loss of important properties of the original concept. Our approach supports interactive rendering of polyhedrally bounded volumetric objects on the GPU based on ray casting. The ray casting can be conveniently used for both the shadow map computation and the rendering. We show how anti-aliased high-quality shadows are feasible in scenes composed of multiple overlapping translucent objects, and how sparse scenes can be handled efficiently using clustered deep shadow maps. © 2012 Springer-Verlag.

Evaluation and Improvement of the CIE Metameric and Colour Rendering Index

Directory of Open Access Journals (Sweden)

Radovan Slavuj

2015-12-01

Full Text Available All artificial light sources are intended to simulate daylight and its properties of color rendering or ability of colour discrimination. Two indices, defined by the CIE, are used to quantify quality of the artificial light sources. First is Color Rendering Index which quantifies ability of light sources to render colours and other is the Metemerism Index which describes metamerism potential of given light source. Calculation of both indices are defined by CIE and has been a subject of discussion and change in past. In this work particularly, the problem of sample number and type used in calculation is addressed here and evaluated. It is noticed that both indices depends on the choice and sample number and that they should be determined based on application.

In Vivo CT Direct Volume Rendering: A Three-Dimensional Anatomical Description of the Heart

International Nuclear Information System (INIS)

Cutroneo, Giuseppina; Bruschetta, Daniele; Trimarchi, Fabio; Cacciola, Alberto; Cinquegrani, Maria; Duca, Antonio; Rizzo, Giuseppina; Alati, Emanuela; Gaeta, Michele; Milardi, Demetrio

2016-01-01

Since cardiac anatomy continues to play an important role in the practice of medicine and in the development of medical devices, the study of the heart in three dimensions is particularly useful to understand its real structure, function and proper location in the body. This study demonstrates a fine use of direct volume rendering, processing the data set images obtained by Computed Tomography (CT) of the heart of 5 subjects with age range between 18 and 42 years (2 male, 3 female), with no history of any overt cardiac disease. The cardiac structure in CT images was first extracted from the thorax by marking manually the regions of interest on the computer, and then it was stacked to create new volumetric data. The use of a specific algorithm allowed us to observe with a good perception of depth the heart and the skeleton of the thorax at the same time. Besides, in all examined subjects, it was possible to depict its structure and its position within the body and to study the integrity of papillary muscles, the fibrous tissue of cardiac valve and chordae tendineae and the course of coronary arteries. Our results demonstrated that one of the greatest advantages of algorithmic modifications of direct volume rendering parameters is that this method provides much necessary information in a single radiologic study. It implies a better accuracy in the study of the heart, being complementary to other diagnostic methods and facilitating the therapeutic plans

Dynamic Resolution in GPU-Accelerated Volume Rendering to Autostereoscopic Multiview Lenticular Displays

Directory of Open Access Journals (Sweden)

Daniel Ruijters

2008-09-01

Full Text Available The generation of multiview stereoscopic images of large volume rendered data demands an enormous amount of calculations. We propose a method for hardware accelerated volume rendering of medical data sets to multiview lenticular displays, offering interactive manipulation throughout. The method is based on buffering GPU-accelerated direct volume rendered visualizations of the individual views from their respective focal spot positions, and composing the output signal for the multiview lenticular screen in a second pass. This compositing phase is facilitated by the fact that the view assignment per subpixel is static, and therefore can be precomputed. We decoupled the resolution of the individual views from the resolution of the composited signal, and adjust the resolution on-the-fly, depending on the available processing resources, in order to maintain interactive refresh rates. The optimal resolution for the volume rendered views is determined by means of an analysis of the lattice of the output signal for the lenticular screen in the Fourier domain.

Experiencing "Macbeth": From Text Rendering to Multicultural Performance.

Science.gov (United States)

Reisin, Gail

1993-01-01

Shows how one teacher used innovative methods in teaching William Shakespeare's "Macbeth." Outlines student assignments including text renderings, rewriting a scene from the play, and creating a multicultural scrapbook for the play. (HB)

Chemical reproductive traits of diploid Bombus terrestris males: Consequences on bumblebee conservation.

Science.gov (United States)

Lecocq, Thomas; Gérard, Maxence; Maebe, Kevin; Brasero, Nicolas; Dehon, Lauren; Smagghe, Guy; Valterová, Irena; De Meulemeester, Thibaut; Rasmont, Pierre; Michez, Denis

2017-08-01

The current bumblebee decline leads to inbreeding in populations that fosters a loss of allelic diversity and diploid male production. As diploid males are viable and their offspring are sterile, bumblebee populations can quickly fall in a vortex of extinction. In this article, we investigate for the first time a potential premating mechanism through a major chemical reproductive trait (male cephalic labial gland secretions) that could prevent monandrous virgin queens from mating with diploid males. We focus our study on the cephalic labial gland secretions of diploid and haploid males of Bombus terrestris (L.). Contrary to initial expectations, our results do not show any significant differentiation of cephalic labial gland secretions between diploid and haploid specimens. Queens seem therefore to be unable to avoid mating with diploid males based on their compositions of cephalic labial gland secretions. This suggests that the vortex of extinction of diploid males could not be stopped through premating avoidance based on the cephalic labial gland secretions but other mechanisms could avoid mating between diploid males and queens. © 2016 Institute of Zoology, Chinese Academy of Sciences.

Long-term thermophilic mono-digestion of rendering wastes and co-digestion with potato pulp

International Nuclear Information System (INIS)

Bayr, S.; Ojanperä, M.; Kaparaju, P.; Rintala, J.

2014-01-01

Highlights: • Rendering wastes’ mono-digestion and co-digestion with potato pulp were studied. • CSTR process with OLR of 1.5 kg VS/m 3 d, HRT of 50 d was unstable in mono-digestion. • Free NH 3 inhibited mono-digestion of rendering wastes. • CSTR process with OLR of 1.5 kg VS/m 3 d, HRT of 50 d was stable in co-digestion. • Co-digestion increased methane yield somewhat compared to mono-digestion. - Abstract: In this study, mono-digestion of rendering wastes and co-digestion of rendering wastes with potato pulp were studied for the first time in continuous stirred tank reactor (CSTR) experiments at 55 °C. Rendering wastes have high protein and lipid contents and are considered good substrates for methane production. However, accumulation of digestion intermediate products viz., volatile fatty acids (VFAs), long chain fatty acids (LCFAs) and ammonia nitrogen (NH 4 -N and/or free NH 3 ) can cause process imbalance during the digestion. Mono-digestion of rendering wastes at an organic loading rate (OLR) of 1.5 kg volatile solids (VS)/m 3 d and hydraulic retention time (HRT) of 50 d was unstable and resulted in methane yields of 450 dm 3 /kg VS fed . On the other hand, co-digestion of rendering wastes with potato pulp (60% wet weight, WW) at the same OLR and HRT improved the process stability and increased methane yields (500–680 dm 3 /kg VS fed ). Thus, it can be concluded that co-digestion of rendering wastes with potato pulp could improve the process stability and methane yields from these difficult to treat industrial waste materials

ACCELERATION RENDERING METHOD ON RAY TRACING WITH ANGLE COMPARISON AND DISTANCE COMPARISON

Directory of Open Access Journals (Sweden)

Liliana liliana

2007-01-01

Full Text Available In computer graphics applications, to produce realistic images, a method that is often used is ray tracing. Ray tracing does not only model local illumination but also global illumination. Local illumination count ambient, diffuse and specular effects only, but global illumination also count mirroring and transparency. Local illumination count effects from the lamp(s but global illumination count effects from other object(s too. Objects that are usually modeled are primitive objects and mesh objects. The advantage of mesh modeling is various, interesting and real-like shape. Mesh contains many primitive objects like triangle or square (rare. A problem in mesh object modeling is long rendering time. It is because every ray must be checked with a lot of triangle of the mesh. Added by ray from other objects checking, the number of ray that traced will increase. It causes the increasing of rendering time. To solve this problem, in this research, new methods are developed to make the rendering process of mesh object faster. The new methods are angle comparison and distance comparison. These methods are used to reduce the number of ray checking. The rays predicted will not intersect with the mesh, are not checked weather the ray intersects the mesh. With angle comparison, if using small angle to compare, the rendering process will be fast. This method has disadvantage, if the shape of each triangle is big, some triangles will be corrupted. If the angle to compare is bigger, mesh corruption can be avoided but the rendering time will be longer than without comparison. With distance comparison, the rendering time is less than without comparison, and no triangle will be corrupted.

31 CFR 515.548 - Services rendered by Cuba to United States aircraft.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false Services rendered by Cuba to United... REGULATIONS Licenses, Authorizations, and Statements of Licensing Policy § 515.548 Services rendered by Cuba to United States aircraft. Specific licenses are issued for payment to Cuba of charges for services...

GPU Pro advanced rendering techniques

CERN Document Server

Engel, Wolfgang

2010-01-01

This book covers essential tools and techniques for programming the graphics processing unit. Brought to you by Wolfgang Engel and the same team of editors who made the ShaderX series a success, this volume covers advanced rendering techniques, engine design, GPGPU techniques, related mathematical techniques, and game postmortems. A special emphasis is placed on handheld programming to account for the increased importance of graphics on mobile devices, especially the iPhone and iPod touch.Example programs and source code can be downloaded from the book's CRC Press web page. 

A cache-friendly sampling strategy for texture-based volume rendering on GPU

Directory of Open Access Journals (Sweden)

Junpeng Wang

2017-06-01

Full Text Available The texture-based volume rendering is a memory-intensive algorithm. Its performance relies heavily on the performance of the texture cache. However, most existing texture-based volume rendering methods blindly map computational resources to texture memory and result in incoherent memory access patterns, causing low cache hit rates in certain cases. The distance between samples taken by threads of an atomic scheduling unit (e.g. a warp of 32 threads in CUDA of the GPU is a crucial factor that affects the texture cache performance. Based on this fact, we present a new sampling strategy, called Warp Marching, for the ray-casting algorithm of texture-based volume rendering. The effects of different sample organizations and different thread-pixel mappings in the ray-casting algorithm are thoroughly analyzed. Also, a pipeline manner color blending approach is introduced and the power of warp-level GPU operations is leveraged to improve the efficiency of parallel executions on the GPU. In addition, the rendering performance of the Warp Marching is view-independent, and it outperforms existing empty space skipping techniques in scenarios that need to render large dynamic volumes in a low resolution image. Through a series of micro-benchmarking and real-life data experiments, we rigorously analyze our sampling strategies and demonstrate significant performance enhancements over existing sampling methods.

COMPANION ANIMALS SYMPOSIUM: Rendered ingredients significantly influence sustainability, quality, and safety of pet food.

Science.gov (United States)

Meeker, D L; Meisinger, J L

2015-03-01

The rendering industry collects and safely processes approximately 25 million t of animal byproducts each year in the United States. Rendering plants process a variety of raw materials from food animal production, principally offal from slaughterhouses, but include whole animals that die on farms or in transit and other materials such as bone, feathers, and blood. By recycling these byproducts into various protein, fat, and mineral products, including meat and bone meal, hydrolyzed feather meal, blood meal, and various types of animal fats and greases, the sustainability of food animal production is greatly enhanced. The rendering industry is conscious of its role in the prevention of disease and microbiological control and providing safe feed ingredients for livestock, poultry, aquaculture, and pets. The processing of otherwise low-value OM from the livestock production and meat processing industries through rendering drastically reduces the amount of waste. If not rendered, biological materials would be deposited in landfills, burned, buried, or inappropriately dumped with large amounts of carbon dioxide, ammonia, and other compounds polluting air and water. The majority of rendered protein products are used as animal feed. Rendered products are especially valuable to the livestock and pet food industries because of their high protein content, digestible AA levels (especially lysine), mineral availability (especially calcium and phosphorous), and relatively low cost in relation to their nutrient value. The use of these reclaimed and recycled materials in pet food is a much more sustainable model than using human food for pets.

Matching rendered and real world images by digital image processing

Science.gov (United States)

Mitjà, Carles; Bover, Toni; Bigas, Miquel; Escofet, Jaume

2010-05-01

Recent advances in computer-generated images (CGI) have been used in commercial and industrial photography providing a broad scope in product advertising. Mixing real world images with those rendered from virtual space software shows a more or less visible mismatching between corresponding image quality performance. Rendered images are produced by software which quality performance is only limited by the resolution output. Real world images are taken with cameras with some amount of image degradation factors as lens residual aberrations, diffraction, sensor low pass anti aliasing filters, color pattern demosaicing, etc. The effect of all those image quality degradation factors can be characterized by the system Point Spread Function (PSF). Because the image is the convolution of the object by the system PSF, its characterization shows the amount of image degradation added to any taken picture. This work explores the use of image processing to degrade the rendered images following the parameters indicated by the real system PSF, attempting to match both virtual and real world image qualities. The system MTF is determined by the slanted edge method both in laboratory conditions and in the real picture environment in order to compare the influence of the working conditions on the device performance; an approximation to the system PSF is derived from the two measurements. The rendered images are filtered through a Gaussian filter obtained from the taking system PSF. Results with and without filtering are shown and compared measuring the contrast achieved in different final image regions.

Evolution of male-killer suppression in a natural population.

Directory of Open Access Journals (Sweden)

Emily A Hornett

2006-09-01

Full Text Available Male-killing bacteria are widespread in arthropods, and can profoundly alter the reproductive biology of their host species. Here we detail the first case of complete suppression of a male killer. The nymphalid butterfly Hypolimnas bolina is infected with a strain of the bacterium Wolbachia, wBol1, which kills male host embryos in Polynesian populations, but does not do so in many areas of Southeast Asia, where both males and female adults are naturally infected, and wBol1-infected females produce a 1:1 sex ratio. We demonstrate that absence of male killing by wBol1 is associated with dominant zygotic suppression of the action of the male killer. Simulations demonstrate host suppressors of male-killer action can spread very rapidly, and historical data indicating the presence of male killing in Southeast Asia in the very recent past suggests suppressor spread has been a very recent occurrence. Thus, male killer/host interactions are much more dynamic than previously recognised, with rapid and dramatic loss of the phenotype. Our results also indicate that suppression can render male killers completely quiescent, leading to the conclusion that some species that do not currently express a male killer may have done so in the past, and thus that more species have had their biology affected by these parasites than previously believed.

Long-term thermophilic mono-digestion of rendering wastes and co-digestion with potato pulp

Energy Technology Data Exchange (ETDEWEB)

Bayr, S., E-mail: suvi.bayr@jyu.fi; Ojanperä, M.; Kaparaju, P.; Rintala, J.

2014-10-15

Highlights: • Rendering wastes’ mono-digestion and co-digestion with potato pulp were studied. • CSTR process with OLR of 1.5 kg VS/m{sup 3} d, HRT of 50 d was unstable in mono-digestion. • Free NH{sub 3} inhibited mono-digestion of rendering wastes. • CSTR process with OLR of 1.5 kg VS/m{sup 3} d, HRT of 50 d was stable in co-digestion. • Co-digestion increased methane yield somewhat compared to mono-digestion. - Abstract: In this study, mono-digestion of rendering wastes and co-digestion of rendering wastes with potato pulp were studied for the first time in continuous stirred tank reactor (CSTR) experiments at 55 °C. Rendering wastes have high protein and lipid contents and are considered good substrates for methane production. However, accumulation of digestion intermediate products viz., volatile fatty acids (VFAs), long chain fatty acids (LCFAs) and ammonia nitrogen (NH{sub 4}-N and/or free NH{sub 3}) can cause process imbalance during the digestion. Mono-digestion of rendering wastes at an organic loading rate (OLR) of 1.5 kg volatile solids (VS)/m{sup 3} d and hydraulic retention time (HRT) of 50 d was unstable and resulted in methane yields of 450 dm{sup 3}/kg VS{sub fed}. On the other hand, co-digestion of rendering wastes with potato pulp (60% wet weight, WW) at the same OLR and HRT improved the process stability and increased methane yields (500–680 dm{sup 3}/kg VS{sub fed}). Thus, it can be concluded that co-digestion of rendering wastes with potato pulp could improve the process stability and methane yields from these difficult to treat industrial waste materials.

Construction and Evaluation of an Ultra Low Latency Frameless Renderer for VR.

Science.gov (United States)

Friston, Sebastian; Steed, Anthony; Tilbury, Simon; Gaydadjiev, Georgi

2016-04-01

Latency - the delay between a user's action and the response to this action - is known to be detrimental to virtual reality. Latency is typically considered to be a discrete value characterising a delay, constant in time and space - but this characterisation is incomplete. Latency changes across the display during scan-out, and how it does so is dependent on the rendering approach used. In this study, we present an ultra-low latency real-time ray-casting renderer for virtual reality, implemented on an FPGA. Our renderer has a latency of ~1 ms from 'tracker to pixel'. Its frameless nature means that the region of the display with the lowest latency immediately follows the scan-beam. This is in contrast to frame-based systems such as those using typical GPUs, for which the latency increases as scan-out proceeds. Using a series of high and low speed videos of our system in use, we confirm its latency of ~1 ms. We examine how the renderer performs when driving a traditional sequential scan-out display on a readily available HMO, the Oculus Rift OK2. We contrast this with an equivalent apparatus built using a GPU. Using captured human head motion and a set of image quality measures, we assess the ability of these systems to faithfully recreate the stimuli of an ideal virtual reality system - one with a zero latency tracker, renderer and display running at 1 kHz. Finally, we examine the results of these quality measures, and how each rendering approach is affected by velocity of movement and display persistence. We find that our system, with a lower average latency, can more faithfully draw what the ideal virtual reality system would. Further, we find that with low display persistence, the sensitivity to velocity of both systems is lowered, but that it is much lower for ours.

The lime renderings from plaza de la Corredera, Córdoba

Directory of Open Access Journals (Sweden)

González, T.

2002-09-01

Full Text Available The causes of the pathologies found on the lime renderings from Plaza de la Corredera façades are analysed in this study. For this purpose, the mineralogical and chemical analyses of the building materials -brickwork and rendering mortar- has been carried out, as well as their physical, hydric and mechanical properties have been determined. The obtained results from both unaltered and altered materials, and the analysis of the rendering's raw materials, have allowed us to establish that rendering deterioration is connected to the presence of saline compounds (gypsum, halite, which existing in the brickwork substratum, have been removed due to the water saturation of such brickwork. The main cause responsible of the alteration forms - efflorescence, crusts, grain-disintegration, bulging, flaking found on the renderings, has been the salts precipitation (halite, hexahydrite, epsomite in their way towards the external surface.

En este estudio se analizan las causas de las patologías de los revocos de cal de las fachadas de la Plaza de la Corredera. Para ello se ha realizado el análisis mineralógico y químico de los materiales de construcción - fábrica de ladrillo y mortero de revestimiento- y se han determinado sus propiedades físicas, hídricas y mecánicas. Mediante la comparación de los resultados obtenidos en los materiales inalterados y en los alterados, así como una vez analizadas las materias primas utilizadas en la realización del revoco, se ha podido establecer que la alteración de este último está relacionada con la existencia de compuestos salinos (yeso, halita que, presentes en el substrato de fábrica de ladrillo, se han exudado por saturación de agua de la misma. La precipitación de las sales (halita, hexahidrita, epsomita en su migración hacia el exterior ha sido la principal responsable de las formas de alteración -eflorescencias, costras, arenización, abombamientos, descamaciones- que aparecen sobre los

13 CFR 127.404 - What happens if SBA is unable to verify a concern's eligibility?

Science.gov (United States)

2010-01-01

... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false What happens if SBA is unable to verify a concern's eligibility? 127.404 Section 127.404 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION WOMEN-OWNED SMALL BUSINESS FEDERAL CONTRACT ASSISTANCE PROCEDURES Eligibility Examinations § 127...

Insurance of professional responsibility at medical aid rendering

Directory of Open Access Journals (Sweden)

Abyzova N.V.

2011-12-01

Full Text Available The article discusses the necessity of adoption of professional responsibility insurance act into the public health service. It is considered as the basic mechanism of compensation in case of damage to a patient at medical aid rendering

Intracystic Papillary Carcinoma in the Male Breast: A Rare Endpoint of a Wide Spectrum

Directory of Open Access Journals (Sweden)

Ketan Vagholkar

2013-01-01

Full Text Available Introduction. Fibrocystic disease of the male breast is uncommon. The presence of a spectrum of changes ranging from fibrocystic disease to duct papilloma to papillary carcinoma in the same patient renders the case a rarity and therefore reportable. Case Report. A case of intracystic papillary carcinoma of the male breast is presented. Discussion. The pathological, clinical, diagnostic, and therapeutic options are discussed after reviewing the literature. Conclusion. Modified radical mastectomy with axillary clearance is the safest option for established cases.

Should a doctor stop rendering medical services? Principles of conduct towards patients attempting to commit suicide. Part 1 -- the Polish perspective.

Science.gov (United States)

Zajdel, Justyna; Zajdel, Radoslaw; Krakowiak, Anna

2013-01-01

According to the general idea a doctor can start the medical management process in an adult and not legally incapacitated patient after the patient has given consent to initiate such a process. The patient's refusal makes rendering medical services impossible, irrespective of their scope and kind. It should be emphasized that such a refusal is respected if it is expressed fully, clearly and consciously. Cases in which such a refusal is expressed by an intoxicated suicidal patient, remaining under the influence of narcotics, drugs or medicaments which characterize with a similar activity should be particularly analysed. Although such a person is able to verbally declare his objection, his ability to process the information given by the doctor before initiating medical procedures is limited, or even non-existant. The refusal therefore cannot be regarded as reliable, which results in rendering medical services to the patient. An analysis was made of Acts of Law and the opinions of the judiciar by comparing and excluding contradictory and incoherent elements. Despite the lack of clear regulations of a patient rejecting procedures aimed at saving the patient's life, or the prevention of serious health impairment or sustaining injury, it should be assumed that the objection expressed by the patient who does not demonstrate the ability to process the information provided by the doctor is not reliable, and the doctor is therefore still obliged to render medical services. External factors, such as consumption of alcohol, narcotics and drugs, which characterize with a similar activity impair perception and make the taking of a conscious decision impossible. Not providing medical help and introducing direct compulsion would mean neglecting provision of due diligence in the process of treatment and, as a consequence, placing the patient's health at risk, and suffering from negative implications for the patient's life and/or health in the future. Current provisions should

Reflection curves—new computation and rendering techniques

Directory of Open Access Journals (Sweden)

Dan-Eugen Ulmet

2004-05-01

Full Text Available Reflection curves on surfaces are important tools for free-form surface interrogation. They are essential for industrial 3D CAD/CAM systems and for rendering purposes. In this note, new approaches regarding the computation and rendering of reflection curves on surfaces are introduced. These approaches are designed to take the advantage of the graphics libraries of recent releases of commercial systems such as the OpenInventor toolkit (developed by Silicon Graphics or Matlab (developed by The Math Works. A new relation between reflection curves and contour curves is derived; this theoretical result is used for a straightforward Matlab implementation of reflection curves. A new type of reflection curves is also generated using the OpenInventor texture and environment mapping implementations. This allows the computation, rendering, and animation of reflection curves at interactive rates, which makes it particularly useful for industrial applications.

Cement-Based Renders Manufactured with Phase-Change Materials: Applications and Feasibility

Directory of Open Access Journals (Sweden)

Luigi Coppola

2016-01-01

Full Text Available The paper focuses on the evaluation of the rheological and mechanical performances of cement-based renders manufactured with phase-change materials (PCM in form of microencapsulated paraffin for innovative and ecofriendly residential buildings. Specifically, cement-based renders were manufactured by incorporating different amount of paraffin microcapsules—ranging from 5% to 20% by weight with respect to binder. Specific mass, entrained or entrapped air, and setting time were evaluated on fresh mortars. Compressive strength was measured over time to evaluate the effect of the PCM addition on the hydration kinetics of cement. Drying shrinkage was also evaluated. Experimental results confirmed that the compressive strength decreases as the amount of PCM increases. Furthermore, the higher the PCM content, the higher the drying shrinkage. The results confirm the possibility of manufacturing cement-based renders containing up to 20% by weight of PCM microcapsules with respect to binder.

Hardware-accelerated Point Generation and Rendering of Point-based Impostors

DEFF Research Database (Denmark)

Bærentzen, Jakob Andreas

2005-01-01

This paper presents a novel scheme for generating points from triangle models. The method is fast and lends itself well to implementation using graphics hardware. The triangle to point conversion is done by rendering the models, and the rendering may be performed procedurally or by a black box API....... I describe the technique in detail and discuss how the generated point sets can easily be used as impostors for the original triangle models used to create the points. Since the points reside solely in GPU memory, these impostors are fairly efficient. Source code is available online....

The Visualization Toolkit (VTK): Rewriting the rendering code for modern graphics cards

Science.gov (United States)

Hanwell, Marcus D.; Martin, Kenneth M.; Chaudhary, Aashish; Avila, Lisa S.

2015-09-01

The Visualization Toolkit (VTK) is an open source, permissively licensed, cross-platform toolkit for scientific data processing, visualization, and data analysis. It is over two decades old, originally developed for a very different graphics card architecture. Modern graphics cards feature fully programmable, highly parallelized architectures with large core counts. VTK's rendering code was rewritten to take advantage of modern graphics cards, maintaining most of the toolkit's programming interfaces. This offers the opportunity to compare the performance of old and new rendering code on the same systems/cards. Significant improvements in rendering speeds and memory footprints mean that scientific data can be visualized in greater detail than ever before. The widespread use of VTK means that these improvements will reap significant benefits.

Rendering Falling Leaves on Graphics Hardware

OpenAIRE

Marcos Balsa; Pere-Pau Vázquez

2008-01-01

There is a growing interest in simulating natural phenomena in computer graphics applications. Animating natural scenes in real time is one of the most challenging problems due to the inherent complexity of their structure, formed by millions of geometric entities, and the interactions that happen within. An example of natural scenario that is needed for games or simulation programs are forests. Forests are difficult to render because the huge amount of geometric entities and the large amount...

VIDEO ANIMASI 3D PENGENALAN RUMAH ADAT DAN ALAT MUSIK KEPRI DENGAN MENGUNAKAN TEKNIK RENDER CEL-SHADING

Directory of Open Access Journals (Sweden)

Jianfranco Irfian Asnawi

2016-11-01

Full Text Available Animasi ini berjudul "video animasi 3D rumah adat dan alat musik Kepulauan Riau dengan menggunakan teknik render cel-shading" merupakan video yang bertujuan memperkenalkan alat-alat musik yang berasal dari kepulauan riau, Animasi ini akan diterapkan dengan menggunakan teknik render cel-shading. Cel-shading adalah teknik render yang menampilkan grafik 3D yang menyerupai gambar tangan, seperti gambar komik dan kartun. Teknik ini juga sudah di terapkan dalam game 3D yang ternyata menarik banyak perhatian peminat. Teknik ini akan di terapkan kedalam animasi 3D "video animasi rumah adat dan alat musik kepulauan riau dengan menggunakan teknik render cel-shading" Animasi di rancang menggunakan skenario dan storyboard kemudian di implementasikan dalam software 3D MAYA AUTODESK dengan menggunakan teknik render cel-shading. Setelah diterapkan maka di dapatkan definisi keberhasilan dari teknik render cel shading di bandingkan dengan teknik render global illumination seperti dari kecepatan dalam merender dan tingkat kecerahan warna pada video. Kata kunci: animasi, game 3D, cel-shading.

Visualization of plasma collision phenomenon by particle based rendering

International Nuclear Information System (INIS)

Yamamoto, Takeshi; Takagishi, Hironori; Hasegawa, Kyoko; Nakata, Susumu; Tanaka, Satoshi; Tanaka, Kazuo

2012-01-01

In this paper, we visualize plasma collision phenomenon based on XYT-space (space and time) volume data for supporting research in plasma physics. We create 3D volume data in the XYT-space by piling up a time series of XY-plane photo images taken in experiment. As a result, we can visualize as one still image all the time behavior of the plasma plume. Besides, we adopt 'fused' visualization based on particle based rendering technique. Using that technique, we can easily fuse volume rendering different materials, and compare physics of different elements in flexible ways. In addition, we propose the method to generate pseudo-3D images from pictures shoot by ICCD of two perspectives on the upper and side. (author)

Specification and time required for the application of a lime-based render inside historic buildings

Directory of Open Access Journals (Sweden)

Vasco Peixoto de Freitas

2008-01-01

Full Text Available Intervention in ancient buildings with historical and architectural value requires traditional techniques, such as the use of lime mortars for internal and external wall renderings. In order to ensure the desired performance, these rendering mortars must be rigorously specified and quality controls have to be performed during application. The choice of mortar composition should take account of factors such as compatibility with the substrate, mechanical requirements and water behaviour. The construction schedule, which used to be considered a second order variable, nowadays plays a decisive role in the selection of the rendering technique, given its effects upon costs. How should lime-based mortars be specified? How much time is required for the application and curing of a lime-based render? This paper reflects upon the feasibility of using traditional lime mortars in three-layer renders inside churches and monasteries under adverse hygrothermal conditions and when time is critical. A case study is presented in which internal lime mortar renderings were applied in a church in Northern Portugal, where the very high relative humidity meant that several months were necessary before the drying process was complete.

ARE: Ada Rendering Engine

Directory of Open Access Journals (Sweden)

Stefano Penge

2009-10-01

Full Text Available E' ormai pratica diffusa, nello sviluppo di applicazioni web, l'utilizzo di template e di potenti template engine per automatizzare la generazione dei contenuti da presentare all'utente. Tuttavia a volte la potenza di tali engine è€ ottenuta mescolando logica e interfaccia, introducendo linguaggi diversi da quelli di descrizione della pagina, o addirittura inventando nuovi linguaggi dedicati.ARE (ADA Rendering Engine è€ pensato per gestire l'intero flusso di creazione del contenuto HTML/XHTML dinamico, la selezione del corretto template, CSS, JavaScript e la produzione dell'output separando completamente logica e interfaccia. I templates utilizzati sono puro HTML senza parti in altri linguaggi, e possono quindi essere gestiti e visualizzati autonomamente. Il codice HTML generato è€ uniforme e parametrizzato.E' composto da due moduli, CORE (Common Output Rendering Engine e ALE (ADA Layout Engine.Il primo (CORE viene utilizzato per la generazione OO degli elementi del DOM ed è pensato per aiutare lo sviluppatore nella produzione di codice valido rispetto al DTD utilizzato. CORE genera automaticamente gli elementi del DOM in base al DTD impostato nella configurazioneIl secondo (ALE viene utilizzato come template engine per selezionare automaticamente in base ad alcuni parametri (modulo, profilo utente, tipologia del nodo, del corso, preferenze di installazione il template HTML, i CSS e i file JavaScript appropriati. ALE permette di usare templates di default e microtemplates ricorsivi per semplificare il lavoro del grafico.I due moduli possono in ogni caso essere utilizzati indipendentemente l'uno dall'altro. E' possibile generare e renderizzare una pagina HTML utilizzando solo CORE oppure inviare gli oggetti CORE al template engine ALE che provvede a renderizzare la pagina HTML. Viceversa è possibile generare HTML senza utilizzare CORE ed inviarlo al template engine ALECORE è alla prima release ed è€ già utilizzato all

Morphological pyramids in multiresolution MIP rendering of large volume data : Survey and new results

NARCIS (Netherlands)

Roerdink, J.B.T.M.

We survey and extend nonlinear signal decompositions based on morphological pyramids, and their application to multiresolution maximum intensity projection (MIP) volume rendering with progressive refinement and perfect reconstruction. The structure of the resulting multiresolution rendering

Sparse PDF Volumes for Consistent Multi-Resolution Volume Rendering

KAUST Repository

Sicat, Ronell Barrera; Kruger, Jens; Moller, Torsten; Hadwiger, Markus

2014-01-01

This paper presents a new multi-resolution volume representation called sparse pdf volumes, which enables consistent multi-resolution volume rendering based on probability density functions (pdfs) of voxel neighborhoods. These pdfs are defined

Tactile display for virtual 3D shape rendering

CERN Document Server

Mansutti, Alessandro; Bordegoni, Monica; Cugini, Umberto

2017-01-01

This book describes a novel system for the simultaneous visual and tactile rendering of product shapes which allows designers to simultaneously touch and see new product shapes during the conceptual phase of product development. This system offers important advantages, including potential cost and time savings, compared with the standard product design process in which digital 3D models and physical prototypes are often repeatedly modified until an optimal design is achieved. The system consists of a tactile display that is able to represent, within a real environment, the shape of a product. Designers can explore the rendered surface by touching curves lying on the product shape, selecting those curves that can be considered style features and evaluating their aesthetic quality. In order to physically represent these selected curves, a flexible surface is modeled by means of servo-actuated modules controlling a physical deforming strip. The tactile display is designed so as to be portable, low cost, modular,...

Parametric model of the scala tympani for haptic-rendered cochlear implantation.

Science.gov (United States)

Todd, Catherine; Naghdy, Fazel

2005-01-01

A parametric model of the human scala tympani has been designed for use in a haptic-rendered computer simulation of cochlear implant surgery. It will be the first surgical simulator of this kind. A geometric model of the Scala Tympani has been derived from measured data for this purpose. The model is compared with two existing descriptions of the cochlear spiral. A first approximation of the basilar membrane is also produced. The structures are imported into a force-rendering software application for system development.

Radionuclide cisternography: SPECT and 3D-rendering

International Nuclear Information System (INIS)

Henkes, H.; Huber, G.; Piepgras, U.; Hierholzer, J.; Cordes, M.

1991-01-01

Radionuclide cisternography is indicated in the clinical work-up for hydrocephalus, when searching for CSF leaks, and when testing whether or not intracranial cystic lesions are communicating with the adjacent subarachnoid space. This paper demonstrates the feasibility and diagnostic value of SPECT and subsequent 3D surface rendering in addition to conventional rectilinear CSF imaging in eight patients. Planar images allowed the evaluation of CSF circulation and the detection of CSF fistula. They were advantageous in examinations 48 h after application of 111 In-DTPA. SPECT scans, generated 4-24 h after tracer application, were superior in the delineation of basal cisterns, especially in early scans; this was helpful in patients with pooling due to CSF fistula and in cystic lesions near the skull base. A major drawback was the limited image quality of delayed scans, when the SPECT data were degraded by a low count rate. 3D surface rendering was easily feasible from SPECT data and yielded high quality images. The presentation of the spatial distribution of nuclide-contaminated CSF proved especially helpful in the area of the basal cisterns. (orig.) [de

Emotion rendering in auditory simulations of imagined walking styles

DEFF Research Database (Denmark)

Turchet, Luca; Rodá, Antonio

2016-01-01

This paper investigated how different emotional states of a walker can be rendered and recognized by means of footstep sounds synthesis algorithms. In a first experiment, participants were asked to render, according to imagined walking scenarios, five emotions (aggressive, happy, neutral, sad......, and tender) by manipulating the parameters of synthetic footstep sounds simulating various combinations of surface materials and shoes types. Results allowed to identify, for the involved emotions and sound conditions, the mean values and ranges of variation of two parameters, sound level and temporal...... distance between consecutive steps. Results were in accordance with those reported in previous studies on real walking, suggesting that expression of emotions in walking is independent from the real or imagined motor activity. In a second experiment participants were asked to identify the emotions...

Frequency Analysis of Gradient Estimators in Volume Rendering

NARCIS (Netherlands)

Bentum, Marinus Jan; Lichtenbelt, Barthold B.A.; Malzbender, Tom

1996-01-01

Gradient information is used in volume rendering to classify and color samples along a ray. In this paper, we present an analysis of the theoretically ideal gradient estimator and compare it to some commonly used gradient estimators. A new method is presented to calculate the gradient at arbitrary

Factors affecting extension workers in their rendering of effective ...

African Journals Online (AJOL)

Factors affecting extension workers in their rendering of effective service to pre and ... Small, micro and medium entrepreneurs play an important role in economic ... such as production, marketing and management to adequately service the ...

N(epsilon)-carboxymethyllysine-modified proteins are unable to bind to RAGE and activate an inflammatory response.

Science.gov (United States)

Buetler, Timo M; Leclerc, Estelle; Baumeyer, Alexandra; Latado, Helia; Newell, John; Adolfsson, Oskar; Parisod, Véronique; Richoz, Janique; Maurer, Sarah; Foata, Francis; Piguet, Dominique; Junod, Sylviane; Heizmann, Claus W; Delatour, Thierry

2008-03-01

Advanced glycation endproducts (AGEs) containing carboxymethyllysine (CML) modifications are generally thought to be ligands of the receptor for AGEs, RAGEs. It has been argued that this results in the activation of pro-inflammatory pathways and diseases. However, it has not been shown conclusively that a CML-modified protein can interact directly with RAGE. Here, we have analyzed whether beta-lactoglobulin (bLG) or human serum albumin (HSA) modified chemically to contain only CML (10-40% lysine modification) can (i) interact with RAGE in vitro and (ii) interact with and activate RAGE in lung epithelial cells. Our results show that CML-modified bLG or HSA are unable to bind to RAGE in a cell-free assay system (Biacore). Furthermore, they are unable to activate pro-inflammatory signaling in the cellular system. Thus, CML probably does not form the necessary structure(s) to interact with RAGE and activate an inflammatory signaling cascade in RAGE-expressing cells.

Irregular Morphing for Real-Time Rendering of Large Terrain

Directory of Open Access Journals (Sweden)

S. Kalem

2016-06-01

Full Text Available The following paper proposes an alternative approach to the real-time adaptive triangulation problem. A new region-based multi-resolution approach for terrain rendering is described which improves on-the-fly the distribution of the density of triangles inside the tile after selecting appropriate Level-Of-Detail by an adaptive sampling. This proposed approach organizes the heightmap into a QuadTree of tiles that are processed independently. This technique combines the benefits of both Triangular Irregular Network approach and region-based multi-resolution approach by improving the distribution of the density of triangles inside the tile. Our technique morphs the initial regular grid of the tile to deformed grid in order to minimize approximation error. The proposed technique strives to combine large tile size and real-time processing while guaranteeing an upper bound on the screen space error. Thus, this approach adapts terrain rendering process to local surface characteristics and enables on-the-fly handling of large amount of terrain data. Morphing is based-on the multi-resolution wavelet analysis. The use of the D2WT multi-resolution analysis of the terrain height-map speeds up processing and permits to satisfy an interactive terrain rendering. Tests and experiments demonstrate that Haar B-Spline wavelet, well known for its properties of localization and its compact support, is suitable for fast and accurate redistribution. Such technique could be exploited in client-server architecture for supporting interactive high-quality remote visualization of very large terrain.

Haptic rendering foundations, algorithms, and applications

CERN Document Server

Lin, Ming C

2008-01-01

For a long time, human beings have dreamed of a virtual world where it is possible to interact with synthetic entities as if they were real. It has been shown that the ability to touch virtual objects increases the sense of presence in virtual environments. This book provides an authoritative overview of state-of-theart haptic rendering algorithms and their applications. The authors examine various approaches and techniques for designing touch-enabled interfaces for a number of applications, including medical training, model design, and maintainability analysis for virtual prototyping, scienti

GPU Pro 4 advanced rendering techniques

CERN Document Server

Engel, Wolfgang

2013-01-01

GPU Pro4: Advanced Rendering Techniques presents ready-to-use ideas and procedures that can help solve many of your day-to-day graphics programming challenges. Focusing on interactive media and games, the book covers up-to-date methods producing real-time graphics. Section editors Wolfgang Engel, Christopher Oat, Carsten Dachsbacher, Michal Valient, Wessam Bahnassi, and Sebastien St-Laurent have once again assembled a high-quality collection of cutting-edge techniques for advanced graphics processing unit (GPU) programming. Divided into six sections, the book begins with discussions on the abi

GPU PRO 3 Advanced rendering techniques

CERN Document Server

Engel, Wolfgang

2012-01-01

GPU Pro3, the third volume in the GPU Pro book series, offers practical tips and techniques for creating real-time graphics that are useful to beginners and seasoned game and graphics programmers alike. Section editors Wolfgang Engel, Christopher Oat, Carsten Dachsbacher, Wessam Bahnassi, and Sebastien St-Laurent have once again brought together a high-quality collection of cutting-edge techniques for advanced GPU programming. With contributions by more than 50 experts, GPU Pro3: Advanced Rendering Techniques covers battle-tested tips and tricks for creating interesting geometry, realistic sha

Validation of Thermal Lethality against Salmonella enterica in Poultry Offal during Rendering.

Science.gov (United States)

Jones-Ibarra, Amie-Marie; Acuff, Gary R; Alvarado, Christine Z; Taylor, T Matthew

2017-09-01

Recent outbreaks of human disease following contact with companion animal foods cross-contaminated with enteric pathogens, such as Salmonella enterica, have resulted in increased concern regarding the microbiological safety of animal foods. Additionally, the U.S. Food and Drug Administration Food Safety Modernization Act and its implementing rules have stipulated the implementation of current good manufacturing practices and food safety preventive controls for livestock and companion animal foods. Animal foods and feeds are sometimes formulated to include thermally rendered animal by-product meals. The objective of this research was to determine the thermal inactivation of S. enterica in poultry offal during rendering at differing temperatures. Raw poultry offal was obtained from a commercial renderer and inoculated with a mixture of Salmonella serovars Senftenberg, Enteritidis, and Gallinarum (an avian pathogen) prior to being subjected to heating at 150, 155, or 160°F (65.5, 68.3, or 71.1°C) for up to 15 min. Following heat application, surviving Salmonella bacteria were enumerated. Mean D-values for the Salmonella cocktail at 150, 155, and 160°F were 0.254 ± 0.045, 0.172 ± 0.012, and 0.086 ± 0.004 min, respectively, indicative of increasing susceptibility to increased application of heat during processing. The mean thermal process constant (z-value) was 21.948 ± 3.87°F. Results indicate that a 7.0-log-cycle inactivation of Salmonella may be obtained from the cumulative lethality encountered during the heating come-up period and subsequent rendering of raw poultry offal at temperatures not less than 150°F. Current poultry rendering procedures are anticipated to be effective for achieving necessary pathogen control when completed under sanitary conditions.

Semiquantitative SPECT myocardial perfusion with dipyridamole in patients unable to exercise. Event rate during 4 years of follow up

International Nuclear Information System (INIS)

Balestrini, V.R.; Arja, V.J.; Sandrin, A.L.; Calvo, G.R.; Gomez Bosh, Z.; Quiroga, W.; Balestrini, C.E.; Joekes, S.

2002-01-01

The increasingly numbers of patients (P) that can't reach an adequate level of exercise in order to evaluate CAD, lead us to use pharmacological and technical tools available for this subgroup of P. Aim: evaluate the prognostic significance of myocardial perfusion SPECT imaging with pharmacological stress in P without LBBB, unable to exercise. Material and Methods: 209 P were included. Mean age: 65 years old (39-88), male 66%. Clinical: Pre test likelihood 8: 28%; SDS 0 and SRS 0: 31.7%; SDS 0 + SRS >=1: 21%; SDS >=1: 47.3%. III) Follow up: 13 patients were early re-vascularized induced by SPECT study results, 10 patients get lost and 186 were follow up by a mean 1086 days. Cumulative events rate: 1st year SCE 9.7%, HCE 1.6%; 2nd year SCE 14%, HCE 4.3%; 3rd year SCE 17.7%, HCE 5.4%; 4th year SCE 21%, HCE 5,4%. Scintigraphic indices and events rate relationship are presented. Conclusion: There was a relationship between scintigraphic indices and hard cardiac events. The semiquantitative myocardial perfusion with dipyridamole stress was a safe test and useful to discriminate groups of P with different risk of events

The effect of depth compression on multiview rendering quality

NARCIS (Netherlands)

Merkle, P.; Morvan, Y.; Smolic, A.; Farin, D.S.; Mueller, K..; With, de P.H.N.; Wiegand, T.

2010-01-01

This paper presents a comparative study on different techniques for depth-image compression and its implications on the quality of multiview video plus depth virtual view rendering. A novel coding algorithm for depth images that concentrates on their special characteristics, namely smooth regions

Using neutrosophic graph cut segmentation algorithm for qualified rendering image selection in thyroid elastography video.

Science.gov (United States)

Guo, Yanhui; Jiang, Shuang-Quan; Sun, Baiqing; Siuly, Siuly; Şengür, Abdulkadir; Tian, Jia-Wei

2017-12-01

Recently, elastography has become very popular in clinical investigation for thyroid cancer detection and diagnosis. In elastogram, the stress results of the thyroid are displayed using pseudo colors. Due to variation of the rendering results in different frames, it is difficult for radiologists to manually select the qualified frame image quickly and efficiently. The purpose of this study is to find the qualified rendering result in the thyroid elastogram. This paper employs an efficient thyroid ultrasound image segmentation algorithm based on neutrosophic graph cut to find the qualified rendering images. Firstly, a thyroid ultrasound image is mapped into neutrosophic set, and an indeterminacy filter is constructed to reduce the indeterminacy of the spatial and intensity information in the image. A graph is defined on the image and the weight for each pixel is represented using the value after indeterminacy filtering. The segmentation results are obtained using a maximum-flow algorithm on the graph. Then the anatomic structure is identified in thyroid ultrasound image. Finally the rendering colors on these anatomic regions are extracted and validated to find the frames which satisfy the selection criteria. To test the performance of the proposed method, a thyroid elastogram dataset is built and totally 33 cases were collected. An experienced radiologist manually evaluates the selection results of the proposed method. Experimental results demonstrate that the proposed method finds the qualified rendering frame with 100% accuracy. The proposed scheme assists the radiologists to diagnose the thyroid diseases using the qualified rendering images.

7 CFR 54.1016 - Advance information concerning service rendered.

Science.gov (United States)

2010-01-01

... MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE (CONTINUED) REGULATIONS AND STANDARDS UNDER THE AGRICULTURAL MARKETING ACT OF 1946 AND THE EGG PRODUCTS INSPECTION ACT... rendered. Upon request of any applicant, all or any part of the contents of any report issued to the...

A Single Swede Midge (Diptera: Cecidomyiidae) Larva Can Render Cauliflower Unmarketable.

Science.gov (United States)

Stratton, Chase A; Hodgdon, Elisabeth A; Zuckerman, Samuel G; Shelton, Anthony M; Chen, Yolanda H

2018-05-01

Swede midge, Contarinia nasturtii Kieffer (Diptera: Cecidomyiidae), is an invasive pest causing significant damage on Brassica crops in the Northeastern United States and Eastern Canada. Heading brassicas, like cauliflower, appear to be particularly susceptible. Swede midge is difficult to control because larvae feed concealed inside meristematic tissues of the plant. In order to develop damage and marketability thresholds necessary for integrated pest management, it is important to determine how many larvae render plants unmarketable and whether the timing of infestation affects the severity of damage. We manipulated larval density (0, 1, 3, 5, 10, or 20) per plant and the timing of infestation (30, 55, and 80 d after seeding) on cauliflower in the lab and field to answer the following questions: 1) What is the swede midge damage threshold? 2) How many swede midge larvae can render cauliflower crowns unmarketable? and 3) Does the age of cauliflower at infestation influence the severity of damage and marketability? We found that even a single larva can cause mild twisting and scarring in the crown rendering cauliflower unmarketable 52% of the time, with more larvae causing more severe damage and additional losses, regardless of cauliflower age at infestation.

Mastering Mental Ray Rendering Techniques for 3D and CAD Professionals

CERN Document Server

O'Connor, Jennifer

2010-01-01

Proven techniques for using mental ray effectively. If you're a busy artist seeking high-end results for your 3D, design, or architecture renders using mental ray, this is the perfect book for you. It distills the highly technical nature of rendering into easy-to-follow steps and tutorials that you can apply immediately to your own projects. The book uses 3ds Max and 3ds Max Design to show the integration with mental ray, but users of any 3D or CAD software can learn valuable techniques for incorporating mental ray into their pipelines.: Takes you under the hood of mental ray, a stand-alone or

Interactive dual-volume rendering visualization with real-time fusion and transfer function enhancement

Science.gov (United States)

Macready, Hugh; Kim, Jinman; Feng, David; Cai, Weidong

2006-03-01

Dual-modality imaging scanners combining functional PET and anatomical CT constitute a challenge in volumetric visualization that can be limited by the high computational demand and expense. This study aims at providing physicians with multi-dimensional visualization tools, in order to navigate and manipulate the data running on a consumer PC. We have maximized the utilization of pixel-shader architecture of the low-cost graphic hardware and the texture-based volume rendering to provide visualization tools with high degree of interactivity. All the software was developed using OpenGL and Silicon Graphics Inc. Volumizer, tested on a Pentium mobile CPU on a PC notebook with 64M graphic memory. We render the individual modalities separately, and performing real-time per-voxel fusion. We designed a novel "alpha-spike" transfer function to interactively identify structure of interest from volume rendering of PET/CT. This works by assigning a non-linear opacity to the voxels, thus, allowing the physician to selectively eliminate or reveal information from the PET/CT volumes. As the PET and CT are rendered independently, manipulations can be applied to individual volumes, for instance, the application of transfer function to CT to reveal the lung boundary while adjusting the fusion ration between the CT and PET to enhance the contrast of a tumour region, with the resultant manipulated data sets fused together in real-time as the adjustments are made. In addition to conventional navigation and manipulation tools, such as scaling, LUT, volume slicing, and others, our strategy permits efficient visualization of PET/CT volume rendering which can potentially aid in interpretation and diagnosis.

A concept of volume rendering guided search process to analyze medical data set.

Science.gov (United States)

Zhou, Jianlong; Xiao, Chun; Wang, Zhiyan; Takatsuka, Masahiro

2008-03-01

This paper firstly presents an approach of parallel coordinates based parameter control panel (PCP). The PCP is used to control parameters of focal region-based volume rendering (FRVR) during data analysis. It uses a parallel coordinates style interface. Different rendering parameters represented with nodes on each axis, and renditions based on related parameters are connected using polylines to show dependencies between renditions and parameters. Based on the PCP, a concept of volume rendering guided search process is proposed. The search pipeline is divided into four phases. Different parameters of FRVR are recorded and modulated in the PCP during search phases. The concept shows that volume visualization could play the role of guiding a search process in the rendition space to help users to efficiently find local structures of interest. The usability of the proposed approach is evaluated to show its effectiveness.

Water driven leaching of biocides from paints and renders

DEFF Research Database (Denmark)

Bester, Kai; Vollertsen, Jes; Bollmann, Ulla E

) were so high, that rather professional urban gardening (flower and greenhouses) than handling of biocides from construction materials seem to be able to explain the findings. While the use in agriculture is restricted, the use in greenhouses is currently considered legal in Denmark. Leaching....../partitioning: Considering material properties, it was found out that, for all of the compounds the sorption (and leaching) is highly pH-dependent. It must be take into account that the pH in the porewater of the tested render materials is between 9 and 10 while the rainwater is around 5, thus making prediction difficult...... at this stage. For some of the compounds the sorption is dependent on the amount of polymer in the render, while it is only rarely of importance which polymer is used. Considering the interaction of weather with the leaching of biocides from real walls it turned out that a lot of parameters such as irradiation...

Sparse PDF Volumes for Consistent Multi-Resolution Volume Rendering

KAUST Repository

Sicat, Ronell Barrera

2014-12-31

This paper presents a new multi-resolution volume representation called sparse pdf volumes, which enables consistent multi-resolution volume rendering based on probability density functions (pdfs) of voxel neighborhoods. These pdfs are defined in the 4D domain jointly comprising the 3D volume and its 1D intensity range. Crucially, the computation of sparse pdf volumes exploits data coherence in 4D, resulting in a sparse representation with surprisingly low storage requirements. At run time, we dynamically apply transfer functions to the pdfs using simple and fast convolutions. Whereas standard low-pass filtering and down-sampling incur visible differences between resolution levels, the use of pdfs facilitates consistent results independent of the resolution level used. We describe the efficient out-of-core computation of large-scale sparse pdf volumes, using a novel iterative simplification procedure of a mixture of 4D Gaussians. Finally, our data structure is optimized to facilitate interactive multi-resolution volume rendering on GPUs.

Real-time 3-dimensional fetal echocardiography with an instantaneous volume-rendered display: early description and pictorial essay.

Science.gov (United States)

Sklansky, Mark S; DeVore, Greggory R; Wong, Pierre C

2004-02-01

Random fetal motion, rapid fetal heart rates, and cumbersome processing algorithms have limited reconstructive approaches to 3-dimensional fetal cardiac imaging. Given the recent development of real-time, instantaneous volume-rendered sonographic displays of volume data, we sought to apply this technology to fetal cardiac imaging. We obtained 1 to 6 volume data sets on each of 30 fetal hearts referred for formal fetal echocardiography. Each volume data set was acquired over 2 to 8 seconds and stored on the system's hard drive. Rendered images were subsequently processed to optimize translucency, smoothing, and orientation and cropped to reveal "surgeon's eye views" of clinically relevant anatomic structures. Qualitative comparison was made with conventional fetal echocardiography for each subject. Volume-rendered displays identified all major abnormalities but failed to identify small ventricular septal defects in 2 patients. Important planes and views not visualized during the actual scans were generated with minimal processing of rendered image displays. Volume-rendered displays tended to have slightly inferior image quality compared with conventional 2-dimensional images. Real-time 3-dimensional echocardiography with instantaneous volume-rendered displays of the fetal heart represents a new approach to fetal cardiac imaging with tremendous clinical potential.

Autostereoscopic image creation by hyperview matrix controlled single pixel rendering

Science.gov (United States)

Grasnick, Armin

2017-06-01

technology just with a simple equation. This formula can be utilized to create a specific hyperview matrix for a certain 3D display - independent of the technology used. A hyperview matrix may contain the references to loads of images and act as an instruction for a subsequent rendering process of particular pixels. Naturally, a single pixel will deliver an image with no resolution and does not provide any idea of the rendered scene. However, by implementing the method of pixel recycling, a 3D image can be perceived, even if all source images are different. It will be proven that several millions of perspectives can be rendered with the support of GPU rendering and benefit from the hyperview matrix. In result, a conventional autostereoscopic display, which is designed to represent only a few perspectives can be used to show a hyperview image by using a suitable hyperview matrix. It will be shown that a millions-of-views-hyperview-image can be presented on a conventional autostereoscopic display. For such an hyperview image it is required that all pixels of the displays are allocated by different source images. Controlled by the hyperview matrix, an adapted renderer can render a full hyperview image in real-time.

Adaptive B-spline volume representation of measured BRDF data for photorealistic rendering

Directory of Open Access Journals (Sweden)

Hyungjun Park

2015-01-01

Full Text Available Measured bidirectional reflectance distribution function (BRDF data have been used to represent complex interaction between lights and surface materials for photorealistic rendering. However, their massive size makes it hard to adopt them in practical rendering applications. In this paper, we propose an adaptive method for B-spline volume representation of measured BRDF data. It basically performs approximate B-spline volume lofting, which decomposes the problem into three sub-problems of multiple B-spline curve fitting along u-, v-, and w-parametric directions. Especially, it makes the efficient use of knots in the multiple B-spline curve fitting and thereby accomplishes adaptive knot placement along each parametric direction of a resulting B-spline volume. The proposed method is quite useful to realize efficient data reduction while smoothing out the noises and keeping the overall features of BRDF data well. By applying the B-spline volume models of real materials for rendering, we show that the B-spline volume models are effective in preserving the features of material appearance and are suitable for representing BRDF data.

Developing a Tile-Based Rendering Method to Improve Rendering Speed of 3D Geospatial Data with HTML5 and WebGL

Directory of Open Access Journals (Sweden)

Seokchan Kang

2017-01-01

Full Text Available A dedicated plug-in has been installed to visualize three-dimensional (3D city modeling spatial data in web-based applications. However, plug-in methods are gradually becoming obsolete, owing to their limited performance with respect to installation errors, unsupported cross-browsers, and security vulnerability. Particularly, in 2015, the NPAPI service was terminated in most existing web browsers except Internet Explorer. To overcome these problems, the HTML5/WebGL (next-generation web standard, confirmed in October 2014 technology emerged. In particular, WebGL is able to display 3D spatial data without plug-ins in browsers. In this study, we attempted to identify the requirements and limitations of displaying 3D city modeling spatial data using HTML5/WebGL, and we propose alternative ways based on the bin-packing algorithm that aggregates individual 3D city modeling data including buildings in tile units. The proposed method reduces the operational complexity and the number and volume of transmissions required for rendering processing to improve the speed of 3D data rendering. The proposed method was validated on real data for evaluating its effectiveness in 3D visualization of city modeling data in web-based applications.

Leveraging Disturbance Observer Based Torque Control for Improved Impedance Rendering with Series Elastic Actuators

Science.gov (United States)

Mehling, Joshua S.; Holley, James; O'Malley, Marcia K.

2015-01-01

The fidelity with which series elastic actuators (SEAs) render desired impedances is important. Numerous approaches to SEA impedance control have been developed under the premise that high-precision actuator torque control is a prerequisite. Indeed, the design of an inner torque compensator has a significant impact on actuator impedance rendering. The disturbance observer (DOB) based torque control implemented in NASA's Valkyrie robot is considered here and a mathematical model of this torque control, cascaded with an outer impedance compensator, is constructed. While previous work has examined the impact a disturbance observer has on torque control performance, little has been done regarding DOBs and impedance rendering accuracy. Both simulation and a series of experiments are used to demonstrate the significant improvements possible in an SEA's ability to render desired dynamic behaviors when utilizing a DOB. Actuator transparency at low impedances is improved, closed loop hysteresis is reduced, and the actuator's dynamic response to both commands and interaction torques more faithfully matches that of the desired model. All of this is achieved by leveraging DOB based control rather than increasing compensator gains, thus making improved SEA impedance control easier to achieve in practice.

North American Rendering: processing high quality protein and fats for feed North American Rendering: processamento de proteínas e gorduras de alta qualidade para alimentos para animais

Directory of Open Access Journals (Sweden)

David L. Meeker

2009-07-01

Full Text Available One third to one half of each animal produced for meat, milk, eggs, and fiber is not consumed by humans. These raw materials are subjected to rendering processes resulting in many useful products. Meat and bone meal, meat meal, poultry meal, hydrolyzed feather meal, blood meal, fish meal, and animal fats are the primary products resulting from the rendering process. The most important and valuable use for these animal by-products is as feed ingredients for livestock, poultry, aquaculture, and companion animals. There are volumes of scientific references validating the nutritional qualities of these products, and there are no scientific reasons for altering the practice of feeding rendered products to animals. Government agencies regulate the processing of food and feed, and the rendering industry is scrutinized often. In addition, industry programs include good manufacturing practices, HACCP, Codes of Practice, and third-party certification. The rendering industry clearly understands its role in the safe and nutritious production of animal feed ingredients and has done it very effectively for over 100 years. The availability of rendered products for animal feeds in the future depends on regulation and the market. Regulatory agencies will determine whether certain raw materials can be used for animal feed. The National Renderers Association (NRA supports the use of science as the basis for regulation while aesthetics, product specifications, and quality differences should be left to the market place. Without the rendering industry, the accumulation of unprocessed animal by-products would impede the meat industries and pose a serious potential hazard to animal and human health.De um terço a metade da produção animal para carne, leite, ovos e fibra, não são consumidos pelos seres humanos. Estes materiais não consumidos são sujeitos a processamento em graxarias e indústrias de alimentos de origem animal, resultando em uma série de produtos

Custom OpenStreetMap Rendering – OpenTrackMap Experience

Directory of Open Access Journals (Sweden)

Radek Bartoň

2010-02-01

Full Text Available After 5 years of its existence, the OpenSteetMap [1] is becoming to be an important and valuable source of a geographic data for all people on the world. Although initially targeted to provide a map of cities for routing services, it can be exploited to other and often unexpected purposes. Such an utilization is an effort to map a network of hiking tracks of the Czech Tourist Club [2].  To support and apply this endeavour, the OpenTrackMap [3] project was started. Its aim is to primarily provide a customized rendering style for Mapnik renderer which emphasizes map features important to tourists and displays a layer with hiking tracks. This article presents obstacles which such project must face and it can be used as a tutorial for other projects of similar type.

CyberKnife Boost for Patients with Cervical Cancer Unable to Undergo Brachytherapy

International Nuclear Information System (INIS)

Haas, Jonathan Andrew; Witten, Matthew R.; Clancey, Owen; Episcopia, Karen; Accordino, Diane; Chalas, Eva

2012-01-01

Standard radiation therapy for patients undergoing primary chemosensitized radiation for carcinomas of the cervix usually consists of external beam radiation followed by an intracavitary brachytherapy boost. On occasion, the brachytherapy boost cannot be performed due to unfavorable anatomy or because of coexisting medical conditions. We examined the safety and efficacy of using CyberKnife stereotactic body radiotherapy (SBRT) as a boost to the cervix after external beam radiation in those patients unable to have brachytherapy to give a more effective dose to the cervix than with conventional external beam radiation alone. Six consecutive patients with anatomic or medical conditions precluding a tandem and ovoid boost were treated with combined external beam radiation and CyberKnife boost to the cervix. Five patients received 45 Gy to the pelvis with serial intensity-modulated radiation therapy boost to the uterus and cervix to a dose of 61.2 Gy. These five patients received an SBRT boost to the cervix to a dose of 20 Gy in five fractions of 4 Gy each. One patient was treated to the pelvis to a dose of 45 Gy with an external beam boost to the uterus and cervix to a dose of 50.4 Gy. This patient received an SBRT boost to the cervix to a dose of 19.5 Gy in three fractions of 6.5 Gy. Five percent volumes of the bladder and rectum were kept to ≤75 Gy in all patients (i.e., V75 Gy ≤ 5%). All of the patients remain locally controlled with no evidence of disease following treatment. Grade 1 diarrhea occurred in 4/6 patients during the conventional external beam radiation. There has been no grade 3 or 4 rectal or bladder toxicity. There were no toxicities observed following SBRT boost. At a median follow-up of 14 months, CyberKnife radiosurgical boost is well tolerated and efficacious in providing a boost to patients with cervix cancer who are unable to undergo brachytherapy boost. Further follow-up is required to see if these results remain durable.

Parallel hierarchical radiosity rendering

Energy Technology Data Exchange (ETDEWEB)

Carter, Michael [Iowa State Univ., Ames, IA (United States)

1993-07-01

In this dissertation, the step-by-step development of a scalable parallel hierarchical radiosity renderer is documented. First, a new look is taken at the traditional radiosity equation, and a new form is presented in which the matrix of linear system coefficients is transformed into a symmetric matrix, thereby simplifying the problem and enabling a new solution technique to be applied. Next, the state-of-the-art hierarchical radiosity methods are examined for their suitability to parallel implementation, and scalability. Significant enhancements are also discovered which both improve their theoretical foundations and improve the images they generate. The resultant hierarchical radiosity algorithm is then examined for sources of parallelism, and for an architectural mapping. Several architectural mappings are discussed. A few key algorithmic changes are suggested during the process of making the algorithm parallel. Next, the performance, efficiency, and scalability of the algorithm are analyzed. The dissertation closes with a discussion of several ideas which have the potential to further enhance the hierarchical radiosity method, or provide an entirely new forum for the application of hierarchical methods.

VIDEO ANIMASI 3D PENGENALAN RUMAH ADAT DAN ALAT MUSIK KEPRI DENGAN MENGUNAKAN TEKNIK RENDER CEL-SHADING

OpenAIRE

Jianfranco Irfian Asnawi; Afdhol Dzikri

2016-01-01

Animasi ini berjudul "video animasi 3D rumah adat dan alat musik Kepulauan Riau dengan menggunakan teknik render cel-shading" merupakan video yang bertujuan memperkenalkan alat-alat musik yang berasal dari kepulauan riau, Animasi ini akan diterapkan dengan menggunakan teknik render cel-shading. Cel-shading adalah teknik render yang menampilkan grafik 3D yang menyerupai gambar tangan, seperti gambar komik dan kartun. Teknik ini juga sudah di terapkan dalam game 3D yang ternyata menarik banyak ...

Subsurface Scattering-Based Object Rendering Techniques for Real-Time Smartphone Games

Directory of Open Access Journals (Sweden)

Won-Sun Lee

2014-01-01

Full Text Available Subsurface scattering that simulates the path of a light through the material in a scene is one of the advanced rendering techniques in the field of computer graphics society. Since it takes a number of long operations, it cannot be easily implemented in real-time smartphone games. In this paper, we propose a subsurface scattering-based object rendering technique that is optimized for smartphone games. We employ our subsurface scattering method that is utilized for a real-time smartphone game. And an example game is designed to validate how the proposed method can be operated seamlessly in real time. Finally, we show the comparison results between bidirectional reflectance distribution function, bidirectional scattering distribution function, and our proposed subsurface scattering method on a smartphone game.

The effects of multiview depth video compression on multiview rendering

NARCIS (Netherlands)

Merkle, P.; Morvan, Y.; Smolic, A.; Farin, D.S.; Mueller, K.; With, de P.H.N.; Wiegang, T.

2009-01-01

This article investigates the interaction between different techniques for depth compression and view synthesis rendering with multiview video plus scene depth data. Two different approaches for depth coding are compared, namely H.264/MVC, using temporal and inter-view reference images for efficient

Hybrid fur rendering: combining volumetric fur with explicit hair strands

DEFF Research Database (Denmark)

Andersen, Tobias Grønbeck; Falster, Viggo; Frisvad, Jeppe Revall

2016-01-01

Hair is typically modeled and rendered using either explicitly defined hair strand geometry or a volume texture of hair densities. Taken each on their own, these two hair representations have difficulties in the case of animal fur as it consists of very dense and thin undercoat hairs in combination...... with coarse guard hairs. Explicit hair strand geometry is not well-suited for the undercoat hairs, while volume textures are not well-suited for the guard hairs. To efficiently model and render both guard hairs and undercoat hairs, we present a hybrid technique that combines rasterization of explicitly...... defined guard hairs with ray marching of a prismatic shell volume with dynamic resolution. The latter is the key to practical combination of the two techniques, and it also enables a high degree of detail in the undercoat. We demonstrate that our hybrid technique creates a more detailed and soft fur...

One-Dimensional Haptic Rendering Using Audio Speaker with Displacement Determined by Inductance

Directory of Open Access Journals (Sweden)

Avin Khera

2016-03-01

Full Text Available We report overall design considerations and preliminary results for a new haptic rendering device based on an audio loudspeaker. Our application models tissue properties during microsurgery. For example, the device could respond to the tip of a tool by simulating a particular tissue, displaying a desired compressibility and viscosity, giving way as the tissue is disrupted, or exhibiting independent motion, such as that caused by pulsations in blood pressure. Although limited to one degree of freedom and with a relatively small range of displacement compared to other available haptic rendering devices, our design exhibits high bandwidth, low friction, low hysteresis, and low mass. These features are consistent with modeling interactions with delicate tissues during microsurgery. In addition, our haptic rendering device is designed to be simple and inexpensive to manufacture, in part through an innovative method of measuring displacement by existing variations in the speaker’s inductance as the voice coil moves over the permanent magnet. Low latency and jitter are achieved by running the real-time simulation models on a dedicated microprocessor, while maintaining bidirectional communication with a standard laptop computer for user controls and data logging.

Comparative mating and reproductive performance of radiation sterilized and radiation induced F1 sterile males of Earias vittella (Fabricius)

International Nuclear Information System (INIS)

Shantharam, K.; Tamhankar, A.J.; Harwalkar, M.R.

1995-01-01

Studies were conducted on mating behaviour and reproductive performance of a) Earias vittella (F.) males rendered sterile by exposing them to 300 Gy gamma rays and b) F 1 sterile males obtained by exposing parent male to 100 Gy gamma rays. For the study, males were allowed only one mating with a normal female. Results revealed that premating period, period in copula and per cent insects mating were not adversely affected in case of both types of sterile males and fecundity also remained unaffected. However, in both types of sterile males, incidence of spermatophore transfer without sperm was very large and such an occurrence (including reduced spermatophore transfer) was significantly higher in case of radiation sterilized males compared to the F 1 sterile males. Inability to produce and transfer spermatophore and/or sperm appeared to be a major cause behind the reduced mating competitiveness of both types of males. (author). 22 refs., 2 tabs

CT portography by multidetector helical CT. Comparison of three rendering models

International Nuclear Information System (INIS)

Nakayama, Yoshiharu; Imuta, Masanori; Funama, Yoshinori; Kadota, Masataka; Utsunomiya, Daisuke; Shiraishi, Shinya; Hayashida, Yoshiko; Yamashita, Yasuyuki

2002-01-01

The purpose of this study was to assess the value of multidetector CT portography in visualizing varices and portosystemic collaterals in comparison with conventional portography, and to compare the visualizations obtained by three rendering models (volume rendering, VR; minimum intensity projection, MIP; and shaded surface display, SSD). A total of 46 patients with portal hypertension were examined by CT and conventional portography for evaluation of portosystemic collaterals. CT portography was performed by multidetector CT (MD-CT) scanner with a slice thickness of 2.5 mm and table feed of 7.5 mm. Three types of CT portographic models were generated and compared with transarterial portography. Among 46 patients, 48 collaterals were identified on CT transverse images, while 38 collaterals were detected on transarterial portography. Forty-four of 48 collaterals identified on CT transverse images were visualized with the MIP model, while 34 and 29 collaterals were visualized by the VR and SSD methods, respectively. The average CT value for the portal vein and varices was 198 HU with data acquisition of 50 sec after contrast material injection. CT portography by multidetector CT provides excellent images in the visualization of portosystemic collaterals. The images of collaterals produced by MD-CT are superior to those of transarterial portography. Among the three rendering techniques, MIP provides the best visualization of portosystemic collaterals. (author)

CT portography by multidetector helical CT. Comparison of three rendering models

Energy Technology Data Exchange (ETDEWEB)

Nakayama, Yoshiharu; Imuta, Masanori; Funama, Yoshinori; Kadota, Masataka; Utsunomiya, Daisuke; Shiraishi, Shinya; Hayashida, Yoshiko; Yamashita, Yasuyuki [Kumamoto Univ. (Japan). School of Medicine

2002-12-01

The purpose of this study was to assess the value of multidetector CT portography in visualizing varices and portosystemic collaterals in comparison with conventional portography, and to compare the visualizations obtained by three rendering models (volume rendering, VR; minimum intensity projection, MIP; and shaded surface display, SSD). A total of 46 patients with portal hypertension were examined by CT and conventional portography for evaluation of portosystemic collaterals. CT portography was performed by multidetector CT (MD-CT) scanner with a slice thickness of 2.5 mm and table feed of 7.5 mm. Three types of CT portographic models were generated and compared with transarterial portography. Among 46 patients, 48 collaterals were identified on CT transverse images, while 38 collaterals were detected on transarterial portography. Forty-four of 48 collaterals identified on CT transverse images were visualized with the MIP model, while 34 and 29 collaterals were visualized by the VR and SSD methods, respectively. The average CT value for the portal vein and varices was 198 HU with data acquisition of 50 sec after contrast material injection. CT portography by multidetector CT provides excellent images in the visualization of portosystemic collaterals. The images of collaterals produced by MD-CT are superior to those of transarterial portography. Among the three rendering techniques, MIP provides the best visualization of portosystemic collaterals. (author)

Rendering LGBTQ+ Visible in Nursing: Embodying the Philosophy of Caring Science.

Science.gov (United States)

Goldberg, Lisa; Rosenburg, Neal; Watson, Jean

2017-06-01

Although health care institutions continue to address the importance of diversity initiatives, the standard(s) for treatment remain historically and institutionally grounded in a sociocultural privileging of heterosexuality. As a result, lesbian, gay, bisexual, transgender, and queer (LGBTQ+) communities in health care remain largely invisible. This marked invisibility serves as a call to action, a renaissance of thinking within redefined boundaries and limitations. We must therefore refocus our habits of attention on the wholeness of persons and the diversity of their storied experiences as embodied through contemporary society. By rethinking current understandings of LGBTQ+ identities through innovative representation(s) of the media, music industry, and pop culture within a caring science philosophy, nurses have a transformative opportunity to render LGBTQ+ visible and in turn render a transformative opportunity for themselves.

The Peshitta Rendering of Psalm 25: Spelling, Synonyms, and Syntax’

NARCIS (Netherlands)

Dyk, J.W.; Loopstra, J.; Sokoloff, M.

2013-01-01

The very act of making a translation implies that the rendered text will differ from the source text. The underlying presupposition is that the grammar, syntax, and semantics of the source and target languages are sufficiently divergent as to warrant a translation. Translations differ in how close

An Extension of Fourier-Wavelet Volume Rendering by View Interpolation

NARCIS (Netherlands)

Westenberg, Michel A.; Roerdink, Jos B.T.M.

2001-01-01

This paper describes an extension to Fourier-wavelet volume rendering (FWVR), which is a Fourier domain implementation of the wavelet X-ray transform. This transform combines integration along the line of sight with a simultaneous 2-D wavelet transform in the view plane perpendicular to this line.

Development of volume rendering module for real-time visualization system

International Nuclear Information System (INIS)

Otani, Takayuki; Muramatsu, Kazuhiro

2000-03-01

Volume rendering is a method to visualize the distribution of physical quantities in the three dimensional space from any viewpoint by tracing the ray direction on the ordinary two dimensional monitoring display. It enables to provide the interior information as well as the surfacial one by producing the translucent images. Therefore, it is regarded as a very useful means as well as an important one in the analysis of the computational results of the scientific calculations, although it has, unfortunately, disadvantage to need a large amount of computing time. This report describes algorithm and its performance of the volume rendering soft-ware which was developed as an important functional module in the real-time visualization system PATRAS. This module can directly visualize the computed results on BFC grid. Moreover, it has already realized the speed-up in some parts of the software by the use of a newly developed heuristic technique. This report includes the investigation on the speed-up of the software by parallel processing. (author)

Remote parallel rendering for high-resolution tiled display walls

KAUST Repository

Nachbaur, Daniel; Dumusc, Raphael; Bilgili, Ahmet; Hernando, Juan; Eilemann, Stefan

2014-01-01

© 2014 IEEE. We present a complete, robust and simple to use hardware and software stack delivering remote parallel rendering of complex geometrical and volumetric models to high resolution tiled display walls in a production environment. We describe the setup and configuration, present preliminary benchmarks showing interactive framerates, and describe our contributions for a seamless integration of all the software components.

Remote parallel rendering for high-resolution tiled display walls

KAUST Repository

Nachbaur, Daniel

2014-11-01

© 2014 IEEE. We present a complete, robust and simple to use hardware and software stack delivering remote parallel rendering of complex geometrical and volumetric models to high resolution tiled display walls in a production environment. We describe the setup and configuration, present preliminary benchmarks showing interactive framerates, and describe our contributions for a seamless integration of all the software components.

D.Vanwijnsberghe, Autour de la Madeleine Renders

Directory of Open Access Journals (Sweden)

Muriel Verbeeck-Boutin

2008-10-01

Full Text Available Institution fédérale belge de réputation internationale, l’Institut royal du Patrimoine artistique, à Bruxelles,  célèbre cette année son soixantième anniversaire: c’est l’occasion de rappeler le prestige dont jouit depuis des décennies cet institut de recherche, de formation et de diffusion du savoir. Pour souligner l’événement, l’IRPA publie le quatrième volume de la collection Scientia Artis. Il présente sous le titre Autour de la Madeleine Renders un ensemble de recherches qui documentent...

3-D volume rendering visualization for calculated distributions of diesel spray; Diesel funmu kyodo suchi keisan kekka no sanjigen volume rendering hyoji

Energy Technology Data Exchange (ETDEWEB)

Yoshizaki, T; Imanishi, H; Nishida, K; Yamashita, H; Hiroyasu, H; Kaneda, K [Hiroshima University, Hiroshima (Japan)

1997-10-01

Three dimensional visualization technique based on volume rendering method has been developed in order to translate calculated results of diesel combustion simulation into realistically spray and flame images. This paper presents an overview of diesel combustion model which has been developed at Hiroshima University, a description of the three dimensional visualization technique, and some examples of spray and flame image generated by this visualization technique. 8 refs., 8 figs., 1 tab.

Physically Based Rendering in the Nightshade NG Visualization Platform

Science.gov (United States)

Berglund, Karrie; Larey-Williams, Trystan; Spearman, Rob; Bogard, Arthur

2015-01-01

This poster describes our work on creating a physically based rendering model in Nightshade NG planetarium simulation and visualization software (project website: NightshadeSoftware.org). We discuss techniques used for rendering realistic scenes in the universe and dealing with astronomical distances in real time on consumer hardware. We also discuss some of the challenges of rewriting the software from scratch, a project which began in 2011.Nightshade NG can be a powerful tool for sharing data and visualizations. The desktop version of the software is free for anyone to download, use, and modify; it runs on Windows and Linux (and eventually Mac). If you are looking to disseminate your data or models, please stop by to discuss how we can work together.Nightshade software is used in literally hundreds of digital planetarium systems worldwide. Countless teachers and astronomy education groups run the software on flat screens. This wide use makes Nightshade an effective tool for dissemination to educators and the public.Nightshade NG is an especially powerful visualization tool when projected on a dome. We invite everyone to enter our inflatable dome in the exhibit hall to see this software in a 3D environment.

The rendering context for stereoscopic 3D web

Science.gov (United States)

Chen, Qinshui; Wang, Wenmin; Wang, Ronggang

2014-03-01

3D technologies on the Web has been studied for many years, but they are basically monoscopic 3D. With the stereoscopic technology gradually maturing, we are researching to integrate the binocular 3D technology into the Web, creating a stereoscopic 3D browser that will provide users with a brand new experience of human-computer interaction. In this paper, we propose a novel approach to apply stereoscopy technologies to the CSS3 3D Transforms. Under our model, each element can create or participate in a stereoscopic 3D rendering context, in which 3D Transforms such as scaling, translation and rotation, can be applied and be perceived in a truly 3D space. We first discuss the underlying principles of stereoscopy. After that we discuss how these principles can be applied to the Web. A stereoscopic 3D browser with backward compatibility is also created for demonstration purposes. We take advantage of the open-source WebKit project, integrating the 3D display ability into the rendering engine of the web browser. For each 3D web page, our 3D browser will create two slightly different images, each representing the left-eye view and right-eye view, both to be combined on the 3D display to generate the illusion of depth. And as the result turns out, elements can be manipulated in a truly 3D space.

Digital representations of the real world how to capture, model, and render visual reality

CERN Document Server

Magnor, Marcus A; Sorkine-Hornung, Olga; Theobalt, Christian

2015-01-01

Create Genuine Visual Realism in Computer Graphics Digital Representations of the Real World: How to Capture, Model, and Render Visual Reality explains how to portray visual worlds with a high degree of realism using the latest video acquisition technology, computer graphics methods, and computer vision algorithms. It explores the integration of new capture modalities, reconstruction approaches, and visual perception into the computer graphics pipeline.Understand the Entire Pipeline from Acquisition, Reconstruction, and Modeling to Realistic Rendering and ApplicationsThe book covers sensors fo

Towards the Availability of the Distributed Cluster Rendering System: Automatic Modeling and Verification

DEFF Research Database (Denmark)

Wang, Kemin; Jiang, Zhengtao; Wang, Yongbin

2012-01-01

, whenever the number of node-n and related parameters vary, we can create the PRISM model file rapidly and then we can use PRISM model checker to verify ralated system properties. At the end of this study, we analyzed and verified the availability distributions of the Distributed Cluster Rendering System......In this study, we proposed a Continuous Time Markov Chain Model towards the availability of n-node clusters of Distributed Rendering System. It's an infinite one, we formalized it, based on the model, we implemented a software, which can automatically model with PRISM language. With the tool...

Flight-appropriate 3D Terrain-rendering Toolkit for Synthetic Vision, Phase II

Data.gov (United States)

National Aeronautics and Space Administration — The TerraBlocksTM 3D terrain data format and terrain-block-rendering methodology provides an enabling basis for successful commercial deployment of...

Deep Exemplar 2D-3D Detection by Adapting from Real to Rendered Views

OpenAIRE

Massa, Francisco; Russell, Bryan; Aubry, Mathieu

2015-01-01

This paper presents an end-to-end convolutional neural network (CNN) for 2D-3D exemplar detection. We demonstrate that the ability to adapt the features of natural images to better align with those of CAD rendered views is critical to the success of our technique. We show that the adaptation can be learned by compositing rendered views of textured object models on natural images. Our approach can be naturally incorporated into a CNN detection pipeline and extends the accuracy and speed benefi...

FluoRender: joint freehand segmentation and visualization for many-channel fluorescence data analysis.

Science.gov (United States)

Wan, Yong; Otsuna, Hideo; Holman, Holly A; Bagley, Brig; Ito, Masayoshi; Lewis, A Kelsey; Colasanto, Mary; Kardon, Gabrielle; Ito, Kei; Hansen, Charles

2017-05-26

Image segmentation and registration techniques have enabled biologists to place large amounts of volume data from fluorescence microscopy, morphed three-dimensionally, onto a common spatial frame. Existing tools built on volume visualization pipelines for single channel or red-green-blue (RGB) channels have become inadequate for the new challenges of fluorescence microscopy. For a three-dimensional atlas of the insect nervous system, hundreds of volume channels are rendered simultaneously, whereas fluorescence intensity values from each channel need to be preserved for versatile adjustment and analysis. Although several existing tools have incorporated support of multichannel data using various strategies, the lack of a flexible design has made true many-channel visualization and analysis unavailable. The most common practice for many-channel volume data presentation is still converting and rendering pseudosurfaces, which are inaccurate for both qualitative and quantitative evaluations. Here, we present an alternative design strategy that accommodates the visualization and analysis of about 100 volume channels, each of which can be interactively adjusted, selected, and segmented using freehand tools. Our multichannel visualization includes a multilevel streaming pipeline plus a triple-buffer compositing technique. Our method also preserves original fluorescence intensity values on graphics hardware, a crucial feature that allows graphics-processing-unit (GPU)-based processing for interactive data analysis, such as freehand segmentation. We have implemented the design strategies as a thorough restructuring of our original tool, FluoRender. The redesign of FluoRender not only maintains the existing multichannel capabilities for a greatly extended number of volume channels, but also enables new analysis functions for many-channel data from emerging biomedical-imaging techniques.

Rendering potential wearable robot designs with the LOPES gait trainer.

Science.gov (United States)

Koopman, B; van Asseldonk, E H F; van der Kooij, H; van Dijk, W; Ronsse, R

2011-01-01

In recent years, wearable robots (WRs) for rehabilitation, personal assistance, or human augmentation are gaining increasing interest. To make these devices more energy efficient, radical changes to the mechanical structure of the device are being considered. However, it remains very difficult to predict how people will respond to, and interact with, WRs that differ in terms of mechanical design. Users may adjust their gait pattern in response to the mechanical restrictions or properties of the device. The goal of this pilot study is to show the feasibility of rendering the mechanical properties of different potential WR designs using the robotic gait training device LOPES. This paper describes a new method that selectively cancels the dynamics of LOPES itself and adds the dynamics of the rendered WR using two parallel inverse models. Adaptive frequency oscillators were used to get estimates of the joint position, velocity, and acceleration. Using the inverse models, different WR designs can be evaluated, eliminating the need to build several prototypes. As a proof of principle, we simulated the effect of a very simple WR that consisted of a mass attached to the ankles. Preliminary results show that we are partially able to cancel the dynamics of LOPES. Additionally, the simulation of the mass showed an increase in muscle activity but not in the same level as during the control, where subjects actually carried the mass. In conclusion, the results in this paper suggest that LOPES can be used to render different WRs. In addition, it is very likely that the results can be further optimized when more effort is put in retrieving proper estimations for the velocity and acceleration, which are required for the inverse models. © 2011 IEEE

Rendering of HDR content on LDR displays: an objective approach

Science.gov (United States)

Krasula, Lukáš; Narwaria, Manish; Fliegel, Karel; Le Callet, Patrick

2015-09-01

Dynamic range compression (or tone mapping) of HDR content is an essential step towards rendering it on traditional LDR displays in a meaningful way. This is however non-trivial and one of the reasons is that tone mapping operators (TMOs) usually need content-specific parameters to achieve the said goal. While subjective TMO parameter adjustment is the most accurate, it may not be easily deployable in many practical applications. Its subjective nature can also influence the comparison of different operators. Thus, there is a need for objective TMO parameter selection to automate the rendering process. To that end, we investigate into a new objective method for TMO parameters optimization. Our method is based on quantification of contrast reversal and naturalness. As an important advantage, it does not require any prior knowledge about the input HDR image and works independently on the used TMO. Experimental results using a variety of HDR images and several popular TMOs demonstrate the value of our method in comparison to default TMO parameter settings.

Efficient visibility encoding for dynamic illumination in direct volume rendering.

Science.gov (United States)

Kronander, Joel; Jönsson, Daniel; Löw, Joakim; Ljung, Patric; Ynnerman, Anders; Unger, Jonas

2012-03-01

We present an algorithm that enables real-time dynamic shading in direct volume rendering using general lighting, including directional lights, point lights, and environment maps. Real-time performance is achieved by encoding local and global volumetric visibility using spherical harmonic (SH) basis functions stored in an efficient multiresolution grid over the extent of the volume. Our method enables high-frequency shadows in the spatial domain, but is limited to a low-frequency approximation of visibility and illumination in the angular domain. In a first pass, level of detail (LOD) selection in the grid is based on the current transfer function setting. This enables rapid online computation and SH projection of the local spherical distribution of visibility information. Using a piecewise integration of the SH coefficients over the local regions, the global visibility within the volume is then computed. By representing the light sources using their SH projections, the integral over lighting, visibility, and isotropic phase functions can be efficiently computed during rendering. The utility of our method is demonstrated in several examples showing the generality and interactive performance of the approach.

[Hybrid 3-D rendering of the thorax and surface-based virtual bronchoscopy in surgical and interventional therapy control].

Science.gov (United States)

Seemann, M D; Gebicke, K; Luboldt, W; Albes, J M; Vollmar, J; Schäfer, J F; Beinert, T; Englmeier, K H; Bitzer, M; Claussen, C D

2001-07-01

The aim of this study was to demonstrate the possibilities of a hybrid rendering method, the combination of a color-coded surface and volume rendering method, with the feasibility of performing surface-based virtual endoscopy with different representation models in the operative and interventional therapy control of the chest. In 6 consecutive patients with partial lung resection (n = 2) and lung transplantation (n = 4) a thin-section spiral computed tomography of the chest was performed. The tracheobronchial system and the introduced metallic stents were visualized using a color-coded surface rendering method. The remaining thoracic structures were visualized using a volume rendering method. For virtual bronchoscopy, the tracheobronchial system was visualized using a triangle surface model, a shaded-surface model and a transparent shaded-surface model. The hybrid 3D visualization uses the advantages of both the color-coded surface and volume rendering methods and facilitates a clear representation of the tracheobronchial system and the complex topographical relationship of morphological and pathological changes without loss of diagnostic information. Performing virtual bronchoscopy with the transparent shaded-surface model facilitates a reasonable to optimal, simultaneous visualization and assessment of the surface structure of the tracheobronchial system and the surrounding mediastinal structures and lesions. Hybrid rendering relieve the morphological assessment of anatomical and pathological changes without the need for time-consuming detailed analysis and presentation of source images. Performing virtual bronchoscopy with a transparent shaded-surface model offers a promising alternative to flexible fiberoptic bronchoscopy.

Unconscious neural processing differs with method used to render stimuli invisible

Directory of Open Access Journals (Sweden)

Sergey Victor Fogelson

2014-06-01

Full Text Available Visual stimuli can be kept from awareness using various methods. The extent of processing that a given stimulus receives in the absence of awareness is typically used to make claims about the role of consciousness more generally. The neural processing elicited by a stimulus, however, may also depend on the method used to keep it from awareness, and not only on whether the stimulus reaches awareness. Here we report that the method used to render an image invisible has a dramatic effect on how category information about the unseen stimulus is encoded across the human brain. We collected fMRI data while subjects viewed images of faces and tools, that were rendered invisible using either continuous flash suppression (CFS or chromatic flicker fusion (CFF. In a third condition, we presented the same images under normal fully visible viewing conditions. We found that category information about visible images could be extracted from patterns of fMRI responses throughout areas of neocortex known to be involved in face or tool processing. However, category information about stimuli kept from awareness using CFS could be recovered exclusively within occipital cortex, whereas information about stimuli kept from awareness using CFF was also decodable within temporal and frontal regions. We conclude that unconsciously presented objects are processed differently depending on how they are rendered subjectively invisible. Caution should therefore be used in making generalizations on the basis of any one method about the neural basis of consciousness or the extent of information processing without consciousness.

Unconscious neural processing differs with method used to render stimuli invisible.

Science.gov (United States)

Fogelson, Sergey V; Kohler, Peter J; Miller, Kevin J; Granger, Richard; Tse, Peter U

2014-01-01

Visual stimuli can be kept from awareness using various methods. The extent of processing that a given stimulus receives in the absence of awareness is typically used to make claims about the role of consciousness more generally. The neural processing elicited by a stimulus, however, may also depend on the method used to keep it from awareness, and not only on whether the stimulus reaches awareness. Here we report that the method used to render an image invisible has a dramatic effect on how category information about the unseen stimulus is encoded across the human brain. We collected fMRI data while subjects viewed images of faces and tools, that were rendered invisible using either continuous flash suppression (CFS) or chromatic flicker fusion (CFF). In a third condition, we presented the same images under normal fully visible viewing conditions. We found that category information about visible images could be extracted from patterns of fMRI responses throughout areas of neocortex known to be involved in face or tool processing. However, category information about stimuli kept from awareness using CFS could be recovered exclusively within occipital cortex, whereas information about stimuli kept from awareness using CFF was also decodable within temporal and frontal regions. We conclude that unconsciously presented objects are processed differently depending on how they are rendered subjectively invisible. Caution should therefore be used in making generalizations on the basis of any one method about the neural basis of consciousness or the extent of information processing without consciousness.

Wobbled splatting-a fast perspective volume rendering method for simulation of x-ray images from CT

International Nuclear Information System (INIS)

Birkfellner, Wolfgang; Seemann, Rudolf; Figl, Michael; Hummel, Johann; Ede, Christopher; Homolka, Peter; Yang Xinhui; Niederer, Peter; Bergmann, Helmar

2005-01-01

3D/2D registration, the automatic assignment of a global rigid-body transformation matching the coordinate systems of patient and preoperative volume scan using projection images, is an important topic in image-guided therapy and radiation oncology. A crucial part of most 3D/2D registration algorithms is the fast computation of digitally rendered radiographs (DRRs) to be compared iteratively to radiographs or portal images. Since registration is an iterative process, fast generation of DRRs-which are perspective summed voxel renderings-is desired. In this note, we present a simple and rapid method for generation of DRRs based on splat rendering. As opposed to conventional splatting, antialiasing of the resulting images is not achieved by means of computing a discrete point spread function (a so-called footprint), but by stochastic distortion of either the voxel positions in the volume scan or by the simulation of a focal spot of the x-ray tube with non-zero diameter. Our method generates slightly blurred DRRs suitable for registration purposes at framerates of approximately 10 Hz when rendering volume images with a size of 30 MB. (note)

Software System for Vocal Rendering of Printed Documents

Directory of Open Access Journals (Sweden)

Marian DARDALA

2008-01-01

Full Text Available The objective of this paper is to present a software system architecture developed to render the printed documents in a vocal form. On the other hand, in the paper are described the software solutions that exist as software components and are necessary for documents processing as well as for multimedia device controlling used by the system. The usefulness of this system is for people with visual disabilities that can access the contents of documents without that they be printed in Braille system or to exist in an audio form.

Flight-appropriate 3D Terrain-rendering Toolkit for Synthetic Vision, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — TerraMetrics proposes an SBIR Phase I R/R&D effort to develop a key 3D terrain-rendering technology that provides the basis for successful commercial deployment...

Photometric and Colorimeric Comparison of HDR and Spctrally Resolved Rendering Images

DEFF Research Database (Denmark)

Amdemeskel, Mekbib Wubishet; Soreze, Thierry Silvio Claude; Thorseth, Anders

2017-01-01

In this paper, we will demonstrate a comparison between measured colorimetric images, and simulated images from a physics based rendering engine. The colorimetric images are high dynamic range (HDR) and taken with a luminance and colour camera mounted on a goniometer. For the comparison, we have ...

3D-TV Rendering on a Multiprocessor System on a Chip

NARCIS (Netherlands)

Van Eijndhoven, J.T.J.; Li, X.

2006-01-01

This thesis focuses on the issue of mapping 3D-TV rendering applications to a multiprocessor platform. The target platform aims to address tomorrow's multi-media consumer market. The prototype chip, called Wasabi, contains a set of TriMedia processors that communicate viaa shared memory, fast

Complex adaptation-based LDR image rendering for 3D image reconstruction

Science.gov (United States)

Lee, Sung-Hak; Kwon, Hyuk-Ju; Sohng, Kyu-Ik

2014-07-01

A low-dynamic tone-compression technique is developed for realistic image rendering that can make three-dimensional (3D) images similar to realistic scenes by overcoming brightness dimming in the 3D display mode. The 3D surround provides varying conditions for image quality, illuminant adaptation, contrast, gamma, color, sharpness, and so on. In general, gain/offset adjustment, gamma compensation, and histogram equalization have performed well in contrast compression; however, as a result of signal saturation and clipping effects, image details are removed and information is lost on bright and dark areas. Thus, an enhanced image mapping technique is proposed based on space-varying image compression. The performance of contrast compression is enhanced with complex adaptation in a 3D viewing surround combining global and local adaptation. Evaluating local image rendering in view of tone and color expression, noise reduction, and edge compensation confirms that the proposed 3D image-mapping model can compensate for the loss of image quality in the 3D mode.

Immersive volume rendering of blood vessels

Science.gov (United States)

Long, Gregory; Kim, Han Suk; Marsden, Alison; Bazilevs, Yuri; Schulze, Jürgen P.

2012-03-01

In this paper, we present a novel method of visualizing flow in blood vessels. Our approach reads unstructured tetrahedral data, resamples it, and uses slice based 3D texture volume rendering. Due to the sparse structure of blood vessels, we utilize an octree to efficiently store the resampled data by discarding empty regions of the volume. We use animation to convey time series data, wireframe surface to give structure, and utilize the StarCAVE, a 3D virtual reality environment, to add a fully immersive element to the visualization. Our tool has great value in interdisciplinary work, helping scientists collaborate with clinicians, by improving the understanding of blood flow simulations. Full immersion in the flow field allows for a more intuitive understanding of the flow phenomena, and can be a great help to medical experts for treatment planning.

USER EVALUATION OF EIGHT LED LIGHT SOURCES WITH DIFFERENTSPECIAL COLOUR RENDERING INDICES R9

DEFF Research Database (Denmark)

Markvart, Jakob; Iversen, Anne; Logadóttir, Ásta

2013-01-01

In this study we evaluated the influence of the special colour rendering index R9 on subjective red colour perception and Caucasian skin appearance among untrained test subjects. The light sources tested are commercially available LED based light sources with similar correlated colour temperature...... and general colour rendering index, but with varying R9. It was found that the test subjects in general are more positive towards light sources with higher R9. The shift from a majority of negative responses to a majority of positive responses is found to occur at R9 values of ~20....

Cytogenetics of Triatominae: III - A study on male sterility induced through hybridization of Triatoma sórdida and Triatoma pseudomaculata

Directory of Open Access Journals (Sweden)

Giorgio Schreiber

1975-08-01

Full Text Available Males from bilateral crosses between Triatoma sórdida and Triatoma pseudomaculata were unable to give offspring, as shown by subsequent backcrosses (BC between hybrid males and parental females. This kind of sterility indueed through interspecific hybridization seems to be due to lack of sperm migration from the bursa copulatrix to the spermateca, thus suggesting primarily failure on the part of hybrid males to produce and/or to incorporate male accessory secretions into the spermatophore bulb. Addicional proof that sterility induced in hybrid males is at the sperm level has been afforded by the spermatogenesis herein studied. The anomalous processes like; 1 prophases of spermatogonia with the chromosomes scattered in the cytoplasm, 2 first metaphases with unpaired tetrades, 3 spermatids differing in size and 4 spermatozoa of abnormal shape and generdlly of giant size, can be taken as an indicator of the degree of departure from the normal course of spermatogenesis.

Non-Photorealistic Rendering in Chinese Painting of Animals

Institute of Scientific and Technical Information of China (English)

无

2002-01-01

A set of algorithms is proposed in this paper to automatically transform 3D animal models to Chinese painting style. Inspired by real painting process in Chinese painting of animals, we divide the whole rendering process into two parts: borderline stroke making and interior shading. In borderline stroke making process we first find 3D model silhouettes in real-time depending on the viewing direction of a user. After retrieving silhouette information from all model edges, a stroke linking mechanism is applied to link these independent edges into a long stroke. Finally we grow a plain thin silhouette line to a stylus stroke with various widths at each control point and a 2D brush model is combined with it to simulate a Chinese painting stroke. In the interior shading pipeline, three stages are used to convert a Gouraud-shading image to a Chinese painting style image: color quantization, ink diffusion and box filtering. The color quantization stage assigns all pixels in an image into four color levels and each level represents a color layer in a Chinese painting. Ink diffusion stage is used to transfer inks and water between different levels and to grow areas in an irregular way. The box filtering stage blurs sharp borders between different levels to embellish the appearance of final interior shading image. In addition to automatic rendering, an interactive Chinese painting system which is equipped with friendly input devices can be also combined to generate more artistic Chinese painting images manually.

Conservation of the historical render in the Church of Nossa Senhora da Assunção in Elvas

Directory of Open Access Journals (Sweden)

Sofia Salema

2008-01-01

Full Text Available In this paper we present a practical case of conservation of the historical renders in the pyramidal tower of the Church of Nossa Senhora da Assunção in Elvas (Portugal, carried out by the former IPPAR (Portuguese Institute of Architectonic Heritage, now Regional Direction of Culture of Alentejo. Awareness of the value and of the risks facing these renders points towards the necessity to safeguard their material authenticity. During the works of conservation of the main façade, under the layers of non decorated recovering render, a previous decorated render, simulating stone masonry, with raised joints reproducing stone divisions and the internal structure in solid brick, was discovered. After material and historical analysis we came to the conclusion that it was highly probable that this render was contemporary to the construction of the Church and, as such, it seemed essential to conserve and restore this covering as historical evidence and cultural heritage. Treatment of the pyramidal tower render included removal of the non original recover mortars, survey of ancient materials, execution of technical and decorative scheme, surfaces' cleaning and consolidation of the weaker original old mortars. In order to fill the gaps in the original surface, specific lime mortars, prepared with washed sand and standard grain size, were used. Restoration techniques were used to reconstitute and integrate the lacunas. These actions not only conserved the workmanship, but also reconstructed the decorative structure and a reading clarity, allowing the identification of restoration without the connotation of a mimetic integration. This joint action, only possible with the help of the conservation and restoration team, puts into evidence the possibility of continuous evaluation and learning. It is clear that, in cases where there are unknown, unpredictable factors, due to the specific work and value of the materials, it is possible to change the course

A two-metric proposal to specify the color-rendering properties of light sources for retail lighting

Science.gov (United States)

Freyssinier, Jean Paul; Rea, Mark

2010-08-01

Lighting plays an important role in supporting retail operations, from attracting customers, to enabling the evaluation of merchandise, to facilitating the completion of the sale. Lighting also contributes to the identity, comfort, and visual quality of a retail store. With the increasing availability and quality of white LEDs, retail lighting specifiers are now considering LED lighting in stores. The color rendering of light sources is a key factor in supporting retail lighting goals and thus influences a light source's acceptance by users and specifiers. However, there is limited information on what consumers' color preferences are, and metrics used to describe the color properties of light sources often are equivocal and fail to predict preference. The color rendering of light sources is described in the industry solely by the color rendering index (CRI), which is only indirectly related to human perception. CRI is intended to characterize the appearance of objects illuminated by the source and is increasingly being challenged because new sources are being developed with increasingly exotic spectral power distributions. This paper discusses how CRI might be augmented to better use it in support of the design objectives for retail merchandising. The proposed guidelines include the use of gamut area index as a complementary metric to CRI for assuring good color rendering.

31 CFR 363.210 - Is there any period of time during which I will be unable to process certain transactions...

Science.gov (United States)

2010-07-01

... certain transactions regarding my security? A closed book period will be in effect for four business days... which I will be unable to process certain transactions regarding my security? 363.210 Section 363.210..., DEPARTMENT OF THE TREASURY BUREAU OF THE PUBLIC DEBT REGULATIONS GOVERNING SECURITIES HELD IN TREASURYDIRECT...

Diagnostic Accuracy of the Volume Rendering Images of Multi-Detector CT for the Detection of Lumbar Transverse Process Fractures

Energy Technology Data Exchange (ETDEWEB)

Lee, Yun Hak; Chun, Tong Jin [Dept. of Radiology, Eulji University Hospital, Daejeon (Korea, Republic of)

2012-01-15

To compare the accuracy of three-dimensional computed tomographic (3D CT) volume rendering techniques with axial images of multi-detector row computed tomography to identify lumbar transverse process (LTP) fractures in trauma patients. We retrospectively evaluated 42 patients with back pain as a result of blunt trauma between January and June of 2010. Two radiologists examined the 3D CT volume rendering images independently. The confirmation of a LTP fracture was based on the consensus of the axial images by the two radiologists. The results of 3D CT volume rendering images were compared with the axial images and the diagnostic powers (sensitivity, specificity, and accuracy) were calculated. Seven of the 42 patients had twenty five lumbar transverse process fractures. The diagnostic power of the 3D CT volume rendering technique is as accurate as axial images. Reader 1, sensitivity 96%, specificity 100%, accuracy 99.9%; and Reader 2 sensitivity 100%, specificity 99.8%, accuracy 99.8%. The accordance of the two radiologists was 99.8%. 3D CT volume rendering images can alternate axial images to detect lumbar transverse process fractures with good image quality.

Hardware-accelerated autostereogram rendering for interactive 3D visualization

Science.gov (United States)

Petz, Christoph; Goldluecke, Bastian; Magnor, Marcus

2003-05-01

Single Image Random Dot Stereograms (SIRDS) are an attractive way of depicting three-dimensional objects using conventional display technology. Once trained in decoupling the eyes' convergence and focusing, autostereograms of this kind are able to convey the three-dimensional impression of a scene. We present in this work an algorithm that generates SIRDS at interactive frame rates on a conventional PC. The presented system allows rotating a 3D geometry model and observing the object from arbitrary positions in real-time. Subjective tests show that the perception of a moving or rotating 3D scene presents no problem: The gaze remains focused onto the object. In contrast to conventional SIRDS algorithms, we render multiple pixels in a single step using a texture-based approach, exploiting the parallel-processing architecture of modern graphics hardware. A vertex program determines the parallax for each vertex of the geometry model, and the graphics hardware's texture unit is used to render the dot pattern. No data has to be transferred between main memory and the graphics card for generating the autostereograms, leaving CPU capacity available for other tasks. Frame rates of 25 fps are attained at a resolution of 1024x512 pixels on a standard PC using a consumer-grade nVidia GeForce4 graphics card, demonstrating the real-time capability of the system.

Continuous Surface Rendering, Passing from CAD to Physical Representation

Directory of Open Access Journals (Sweden)

Mario Covarrubias

2013-06-01

Full Text Available This paper describes a desktop-mechatronic interface that has been conceived to support designers in the evaluation of aesthetic virtual shapes. This device allows a continuous and smooth free hand contact interaction on a real and developable plastic tape actuated by a servo-controlled mechanism. The objective in designing this device is to reproduce a virtual surface with a consistent physical rendering well adapted to designers' needs. The desktop-mechatronic interface consists in a servo-actuated plastic strip that has been devised and implemented using seven interpolation points. In fact, by using the MEC (Minimal Energy Curve Spline approach, a developable real surface is rendered taking into account the CAD geometry of the virtual shapes. In this paper, we describe the working principles of the interface by using both absolute and relative approaches to control the position on each single control point on the MEC spline. Then, we describe the methodology that has been implemented, passing from the CAD geometry, linked to VisualNastran in order to maintain the parametric properties of the virtual shape. Then, we present the co-simulation between VisualNastran and MATLAB/Simulink used for achieving this goal and controlling the system and finally, we present the results of the subsequent testing session specifically carried out to evaluate the accuracy and the effectiveness of the mechatronic device.

Tomographic image reconstruction and rendering with texture-mapping hardware

International Nuclear Information System (INIS)

Azevedo, S.G.; Cabral, B.K.; Foran, J.

1994-07-01

The image reconstruction problem, also known as the inverse Radon transform, for x-ray computed tomography (CT) is found in numerous applications in medicine and industry. The most common algorithm used in these cases is filtered backprojection (FBP), which, while a simple procedure, is time-consuming for large images on any type of computational engine. Specially-designed, dedicated parallel processors are commonly used in medical CT scanners, whose results are then passed to graphics workstation for rendering and analysis. However, a fast direct FBP algorithm can be implemented on modern texture-mapping hardware in current high-end workstation platforms. This is done by casting the FBP algorithm as an image warping operation with summing. Texture-mapping hardware, such as that on the Silicon Graphics Reality Engine (TM), shows around 600 times speedup of backprojection over a CPU-based implementation (a 100 Mhz R4400 in this case). This technique has the further advantages of flexibility and rapid programming. In addition, the same hardware can be used for both image reconstruction and for volumetric rendering. The techniques can also be used to accelerate iterative reconstruction algorithms. The hardware architecture also allows more complex operations than straight-ray backprojection if they are required, including fan-beam, cone-beam, and curved ray paths, with little or no speed penalties

Acceptability and Preferences among Men and Women for Male Involvement in Antenatal Care

Directory of Open Access Journals (Sweden)

Nompumelelo Yende

2017-01-01

Full Text Available Introduction. Male involvement in antenatal care (ANC has been associated with improved prevention of mother-to-child transmission outcomes in Sub-Saharan Africa; yet it remains uncommon. We assess acceptability of male involvement from the male and female perspectives and potential incentives for men to attend ANC. Methods. Adult pregnant women and men attending primary healthcare at Witkoppen Health and Welfare Centre in Johannesburg, South Africa, from October 2013 to January 2014, were recruited using stratified random sampling to ensure equal representation across gender and HIV status. Results. 300/332 individuals (93.8% offered participation consented. Among the 150 women, 97% had a partner; the majority (92% preferred partner attendance at ANC, and 14% reported partner attendance during this pregnancy. The 150 men had low knowledge of services rendered at ANC outside of pregnancy monitoring, and few (19% had previously attended ANC. Blood pressure screening, fatherhood information, and HIV testing were identified by men as incentives for attendance. Women and men expressed high willingness to, respectively, deliver (95% and respond (97% to ANC letter invitations. Conclusion. Invitation letters to promote male involvement in ANC are highly acceptable to pregnant women and men. Focusing invitation messages on fatherhood and primary healthcare rather than HIV testing may provide greater motivation for male involvement.

Photon Differential Splatting for Rendering Caustics

DEFF Research Database (Denmark)

Frisvad, Jeppe Revall; Schjøth, Lars; Erleben, Kenny

2014-01-01

We present a photon splatting technique which reduces noise and blur in the rendering of caustics. Blurring of illumination edges is an inherent problem in photon splatting, as each photon is unaware of its neighbours when being splatted. This means that the splat size is usually based...... on heuristics rather than knowledge of the local flux density. We use photon differentials to determine the size and shape of the splats such that we achieve adaptive anisotropic flux density estimation in photon splatting. As compared to previous work that uses photon differentials, we present the first method...... where no photons or beams or differentials need to be stored in a map. We also present improvements in the theory of photon differentials, which give more accurate results and a faster implementation. Our technique has good potential for GPU acceleration, and we limit the number of parameters requiring...

Local intelligent electronic device (IED) rendering templates over limited bandwidth communication link to manage remote IED

Science.gov (United States)

Bradetich, Ryan; Dearien, Jason A; Grussling, Barry Jakob; Remaley, Gavin

2013-11-05

The present disclosure provides systems and methods for remote device management. According to various embodiments, a local intelligent electronic device (IED) may be in communication with a remote IED via a limited bandwidth communication link, such as a serial link. The limited bandwidth communication link may not support traditional remote management interfaces. According to one embodiment, a local IED may present an operator with a management interface for a remote IED by rendering locally stored templates. The local IED may render the locally stored templates using sparse data obtained from the remote IED. According to various embodiments, the management interface may be a web client interface and/or an HTML interface. The bandwidth required to present a remote management interface may be significantly reduced by rendering locally stored templates rather than requesting an entire management interface from the remote IED. According to various embodiments, an IED may comprise an encryption transceiver.

New impressive capabilities of SE-workbench for EO/IR real-time rendering of animated scenarios including flares

Science.gov (United States)

Le Goff, Alain; Cathala, Thierry; Latger, Jean

2015-10-01

To provide technical assessments of EO/IR flares and self-protection systems for aircraft, DGA Information superiority resorts to synthetic image generation to model the operational battlefield of an aircraft, as viewed by EO/IR threats. For this purpose, it completed the SE-Workbench suite from OKTAL-SE with functionalities to predict a realistic aircraft IR signature and is yet integrating the real-time EO/IR rendering engine of SE-Workbench called SE-FAST-IR. This engine is a set of physics-based software and libraries that allows preparing and visualizing a 3D scene for the EO/IR domain. It takes advantage of recent advances in GPU computing techniques. The recent past evolutions that have been performed concern mainly the realistic and physical rendering of reflections, the rendering of both radiative and thermal shadows, the use of procedural techniques for the managing and the rendering of very large terrains, the implementation of Image- Based Rendering for dynamic interpolation of plume static signatures and lastly for aircraft the dynamic interpolation of thermal states. The next step is the representation of the spectral, directional, spatial and temporal signature of flares by Lacroix Defense using OKTAL-SE technology. This representation is prepared from experimental data acquired during windblast tests and high speed track tests. It is based on particle system mechanisms to model the different components of a flare. The validation of a flare model will comprise a simulation of real trials and a comparison of simulation outputs to experimental results concerning the flare signature and above all the behavior of the stimulated threat.

INCREASING SAVING BEHAVIOR THROUGH AGE-PROGRESSED RENDERINGS OF THE FUTURE SELF

Science.gov (United States)

HERSHFIELD, HAL E.; GOLDSTEIN, DANIEL G.; SHARPE, WILLIAM F.; FOX, JESSE; YEYKELIS, LEO; CARSTENSEN, LAURA L.; BAILENSON, JEREMY N.

2014-01-01

Many people fail to save what they need to for retirement (Munnell, Webb, and Golub-Sass 2009). Research on excessive discounting of the future suggests that removing the lure of immediate rewards by pre-committing to decisions, or elaborating the value of future rewards can both make decisions more future-oriented. In this article, we explore a third and complementary route, one that deals not with present and future rewards, but with present and future selves. In line with thinkers who have suggested that people may fail, through a lack of belief or imagination, to identify with their future selves (Parfit 1971; Schelling 1984), we propose that allowing people to interact with age-progressed renderings of themselves will cause them to allocate more resources toward the future. In four studies, participants interacted with realistic computer renderings of their future selves using immersive virtual reality hardware and interactive decision aids. In all cases, those who interacted with virtual future selves exhibited an increased tendency to accept later monetary rewards over immediate ones. PMID:24634544

INCREASING SAVING BEHAVIOR THROUGH AGE-PROGRESSED RENDERINGS OF THE FUTURE SELF.

Science.gov (United States)

Hershfield, Hal E; Goldstein, Daniel G; Sharpe, William F; Fox, Jesse; Yeykelis, Leo; Carstensen, Laura L; Bailenson, Jeremy N

2011-11-01

Many people fail to save what they need to for retirement (Munnell, Webb, and Golub-Sass 2009). Research on excessive discounting of the future suggests that removing the lure of immediate rewards by pre-committing to decisions, or elaborating the value of future rewards can both make decisions more future-oriented. In this article, we explore a third and complementary route, one that deals not with present and future rewards, but with present and future selves. In line with thinkers who have suggested that people may fail, through a lack of belief or imagination, to identify with their future selves (Parfit 1971; Schelling 1984), we propose that allowing people to interact with age-progressed renderings of themselves will cause them to allocate more resources toward the future. In four studies, participants interacted with realistic computer renderings of their future selves using immersive virtual reality hardware and interactive decision aids. In all cases, those who interacted with virtual future selves exhibited an increased tendency to accept later monetary rewards over immediate ones.

Signal Processing Implementation and Comparison of Automotive Spatial Sound Rendering Strategies

Directory of Open Access Journals (Sweden)

Bai MingsianR

2009-01-01

Full Text Available Design and implementation strategies of spatial sound rendering are investigated in this paper for automotive scenarios. Six design methods are implemented for various rendering modes with different number of passengers. Specifically, the downmixing algorithms aimed at balancing the front and back reproductions are developed for the 5.1-channel input. Other five algorithms based on inverse filtering are implemented in two approaches. The first approach utilizes binaural (Head-Related Transfer Functions HRTFs measured in the car interior, whereas the second approach named the point-receiver model targets a point receiver positioned at the center of the passenger's head. The proposed processing algorithms were compared via objective and subjective experiments under various listening conditions. Test data were processed by the multivariate analysis of variance (MANOVA method and the least significant difference (Fisher's LSD method as a post hoc test to justify the statistical significance of the experimental data. The results indicate that inverse filtering algorithms are preferred for the single passenger mode. For the multipassenger mode, however, downmixing algorithms generally outperformed the other processing techniques.

LOD 1 VS. LOD 2 - Preliminary Investigations Into Differences in Mobile Rendering Performance

Science.gov (United States)

Ellul, C.; Altenbuchner, J.

2013-09-01

The increasing availability, size and detail of 3D City Model datasets has led to a challenge when rendering such data on mobile devices. Understanding the limitations to the usability of such models on these devices is particularly important given the broadening range of applications - such as pollution or noise modelling, tourism, planning, solar potential - for which these datasets and resulting visualisations can be utilized. Much 3D City Model data is created by extrusion of 2D topographic datasets, resulting in what is known as Level of Detail (LoD) 1 buildings - with flat roofs. However, in the UK the National Mapping Agency (the Ordnance Survey, OS) is now releasing test datasets to Level of Detail (LoD) 2 - i.e. including roof structures. These datasets are designed to integrate with the LoD 1 datasets provided by the OS, and provide additional detail in particular on larger buildings and in town centres. The availability of such integrated datasets at two different Levels of Detail permits investigation into the impact of the additional roof structures (and hence the display of a more realistic 3D City Model) on rendering performance on a mobile device. This paper describes preliminary work carried out to investigate this issue, for the test area of the city of Sheffield (in the UK Midlands). The data is stored in a 3D spatial database as triangles and then extracted and served as a web-based data stream which is queried by an App developed on the mobile device (using the Android environment, Java and OpenGL for graphics). Initial tests have been carried out on two dataset sizes, for the city centre and a larger area, rendering the data onto a tablet to compare results. Results of 52 seconds for rendering LoD 1 data, and 72 seconds for LoD 1 mixed with LoD 2 data, show that the impact of LoD 2 is significant.

Moisture transport properties of brick – comparison of exposed, impregnated and rendered brick

DEFF Research Database (Denmark)

Hansen, Tessa Kvist; Bjarløv, Søren Peter; Peuhkuri, Ruut

2016-01-01

In regards to internal insulation of preservation worthy brick façades, external moisture sources, such as wind-driven rain exposure, inevitably has an impact on moisture conditions within the masonry construction. Surface treatments, such as hydrophobation or render, may remedy the impacts...... of external moisture. In the present paper the surface absorption of liquid water on masonry façades of untreated, hydrophobated and rendered brick, are determined experimentally and compared. The experimental work focuses on methods that can be applied on-site, Karsten tube measurements. These measurements...... are supplemented with results from laboratory measurements of water absorption coefficient by partial immersion. Based on obtained measurement results, simulations are made with external liquid water loads for determination of moisture conditions within the masonry of different surface treatments. Experimental...

Apparatus for rendering at least a portion of a device inoperable and related methods

Energy Technology Data Exchange (ETDEWEB)

Daniels, Michael A.; Steffler, Eric D.; Hartenstein, Steven D.; Wallace, Ronald S.

2016-11-08

Apparatus for rendering at least a portion of a device inoperable may include a containment structure having a first compartment that is configured to receive a device therein and a movable member configured to receive a cartridge having reactant material therein. The movable member is configured to be inserted into the first compartment of the containment structure and to ignite the reactant material within the cartridge. Methods of rendering at least a portion of a device inoperable may include disposing the device into the first compartment of the containment structure, inserting the movable member into the first compartment of the containment structure, igniting the reactant material in the cartridge, and expelling molten metal onto the device.

Efficient Algorithms for Real-Time GPU Volumetric Cloud Rendering with Enhanced Geometry

Directory of Open Access Journals (Sweden)

Carlos Jiménez de Parga

2018-04-01

Full Text Available This paper presents several new techniques for volumetric cloud rendering using efficient algorithms and data structures based on ray-tracing methods for cumulus generation, achieving an optimum balance between realism and performance. These techniques target applications such as flight simulations, computer games, and educational software, even with conventional graphics hardware. The contours of clouds are defined by implicit mathematical expressions or triangulated structures inside which volumetric rendering is performed. Novel techniques are used to reproduce the asymmetrical nature of clouds and the effects of light-scattering, with low computing costs. The work includes a new method to create randomized fractal clouds using a recursive grammar. The graphical results are comparable to those produced by state-of-the-art, hyper-realistic algorithms. These methods provide real-time performance, and are superior to particle-based systems. These outcomes suggest that our methods offer a good balance between realism and performance, and are suitable for use in the standard graphics industry.

Recurrent Anion Gap Acidosis: An Unusual Presentation of X-Linked Adrenoleukodystrophy in a Five-year-old Male.

Science.gov (United States)

Schwab, Joel; Pena, Loren; Sigman, Laura; Waggoner, Darrel

2010-01-01

We are presenting a five-year-old male with recurrent anion gap acidosis. During his last admission, it was detected that he had elevated VLCFA and the evaluation discovered that he had X-linked Adrenooleukodystrophy. He had the Addisonian only phenotype without any clinical or radiographic CNS findings. We were unable to find any other reports of this presentation of ALD. If the work-up of recurrent anion gap acidosis does not uncover an etiology, X-linked ALD should be considered in the differential diagnosis.

Mixed Impact of Firearms Restrictions on Fatal Firearm Injuries in Males: A National Observational Study

Directory of Open Access Journals (Sweden)

Finn Gjertsen

2013-12-01

Full Text Available Introduction: Public health organizations have recommended restricted access and safe storage practices as means to reduce firearm injuries and deaths. We aimed to assess the effect of four firearm restrictions on firearm deaths in Norway 1969–2009. Methods: All deaths due to firearm discharge were included (5,660 deaths, both sexes. The statistical analysis to assess impact of firearm legislations was restricted to males because of the sex disproportionality (94% were males. Results: A total of 89% of firearm deaths (both sexes were classified as suicide, 8% as homicide, and 3% as unintentional (accident. During the past four decades, male accidental firearm death rates were reduced significantly by 90%. Male firearms suicide rates increased from 1969 to 1991 by 166%, and decreased by 62% from 1991 to 2009. Despite the great reduction in male accidental firearm deaths, we were unable to demonstrate effects of the laws. In contrast, we found that a 1990 regulation, requiring a police permit before acquiring a shotgun, had a beneficial impact on suicide in the total sample and in those aged 15–34 years. Male firearm homicides decreased post-2003 regulation regarding storing home guard weapons in private homes. Conclusions: Our findings suggest that two laws could have contributed to reduce male firearm mortality. It is, however, a challenge to measure the role of four firearm restrictions. The null findings are inconclusive, as they may reflect no true impact or study limitations.

Visualization of normal and abnormal inner ear with volume rendering technique using multislice spiral CT

International Nuclear Information System (INIS)

Ma Hui; Han Ping; Liang Bo; Lei Ziqiao; Liu Fang; Tian Zhiliang

2006-01-01

Objective: To evaluate the ability of the volume rendering technique to display the normal and abnormal inner ear structures. Methods: Forty normal earand 61 abnormal inner ears (40 congenital inner ear malformations, 7 labyrinthitis ossificans, and 14 inner ear erosion caused by cholesteatomas) were examined with a MSCT scanner. Axial imaging were performed using the following parameters: 120 kV, 100 mAs, 0.75 mm slice thickness, a pitch factor of 1. The axial images of interested ears were reconstructed with 0.1 mm reconstruction increment and a FOV of 50 mm. The 3D reconstructions were done with volume rendering technique on the workstation. Results: In the subjects without ear disorders a high quality 3D visualization of the inner ear could be achieved. In the patients with inner ear' disorders all inner ear malformations could be clearly displayed on 3D images as follows: (1) Michel deformity (one ear): There was complete absence of all cochlear and vestibular structures. (2) common cavity deformity (3 ears): The cochlea and vestibule were represented by a cystic cavity and couldn't be differentiated from each other. (3)incomplete partition type I (3 ears): The cochlea lacked the entire modiolus and cribriform area, resulting in a cystic appearance. (4) incomplete partition type II (Mondini deformity) (5 ears): The cochlea consisted of 1.5 turns, in which the middle and apical turns coalesced to form a cystic apex. (5) vestibular and semicircular canal malformations (14 ears): Cochlea was normal, vestibule dilated, semicircular canals were absent, hypoplastic or enlarged. (6) dilated vestibular aqueduct (14 ears): The vestibular aqueduct was bell-mouthed. In 7 patients with labyrinthifis ossificans, 3D images failed to clearly show the completeinner ears in 4 ears because of too high ossifications in the membranous labyrinth. In the other 3 ears volume rendering could display the thin cochlea basal turn and the intermittent semicircular canals. In the patients

Modeling a color-rendering operator for high dynamic range images using a cone-response function

Science.gov (United States)

Choi, Ho-Hyoung; Kim, Gi-Seok; Yun, Byoung-Ju

2015-09-01

Tone-mapping operators are the typical algorithms designed to produce visibility and the overall impression of brightness, contrast, and color of high dynamic range (HDR) images on low dynamic range (LDR) display devices. Although several new tone-mapping operators have been proposed in recent years, the results of these operators have not matched those of the psychophysical experiments based on the human visual system. A color-rendering model that is a combination of tone-mapping and cone-response functions using an XYZ tristimulus color space is presented. In the proposed method, the tone-mapping operator produces visibility and the overall impression of brightness, contrast, and color in HDR images when mapped onto relatively LDR devices. The tone-mapping resultant image is obtained using chromatic and achromatic colors to avoid well-known color distortions shown in the conventional methods. The resulting image is then processed with a cone-response function wherein emphasis is placed on human visual perception (HVP). The proposed method covers the mismatch between the actual scene and the rendered image based on HVP. The experimental results show that the proposed method yields an improved color-rendering performance compared to conventional methods.

State of the Art in Transfer Functions for Direct Volume Rendering

KAUST Repository

Ljung, Patric; Krü ger, Jens; Groller, Eduard; Hadwiger, Markus; Hansen, Charles D.; Ynnerman, Anders

2016-01-01

A central topic in scientific visualization is the transfer function (TF) for volume rendering. The TF serves a fundamental role in translating scalar and multivariate data into color and opacity to express and reveal the relevant features present in the data studied. Beyond this core functionality, TFs also serve as a tool for encoding and utilizing domain knowledge and as an expression for visual design of material appearances. TFs also enable interactive volumetric exploration of complex data. The purpose of this state-of-the-art report (STAR) is to provide an overview of research into the various aspects of TFs, which lead to interpretation of the underlying data through the use of meaningful visual representations. The STAR classifies TF research into the following aspects: dimensionality, derived attributes, aggregated attributes, rendering aspects, automation, and user interfaces. The STAR concludes with some interesting research challenges that form the basis of an agenda for the development of next generation TF tools and methodologies. © 2016 The Author(s) Computer Graphics Forum © 2016 The Eurographics Association and John Wiley & Sons Ltd. Published by John Wiley & Sons Ltd.

State of the Art in Transfer Functions for Direct Volume Rendering

KAUST Repository

Ljung, Patric

2016-07-04

A central topic in scientific visualization is the transfer function (TF) for volume rendering. The TF serves a fundamental role in translating scalar and multivariate data into color and opacity to express and reveal the relevant features present in the data studied. Beyond this core functionality, TFs also serve as a tool for encoding and utilizing domain knowledge and as an expression for visual design of material appearances. TFs also enable interactive volumetric exploration of complex data. The purpose of this state-of-the-art report (STAR) is to provide an overview of research into the various aspects of TFs, which lead to interpretation of the underlying data through the use of meaningful visual representations. The STAR classifies TF research into the following aspects: dimensionality, derived attributes, aggregated attributes, rendering aspects, automation, and user interfaces. The STAR concludes with some interesting research challenges that form the basis of an agenda for the development of next generation TF tools and methodologies. © 2016 The Author(s) Computer Graphics Forum © 2016 The Eurographics Association and John Wiley & Sons Ltd. Published by John Wiley & Sons Ltd.

On-the-Fly Decompression and Rendering of Multiresolution Terrain

Energy Technology Data Exchange (ETDEWEB)

Lindstrom, P; Cohen, J D

2009-04-02

We present a streaming geometry compression codec for multiresolution, uniformly-gridded, triangular terrain patches that supports very fast decompression. Our method is based on linear prediction and residual coding for lossless compression of the full-resolution data. As simplified patches on coarser levels in the hierarchy already incur some data loss, we optionally allow further quantization for more lossy compression. The quantization levels are adaptive on a per-patch basis, while still permitting seamless, adaptive tessellations of the terrain. Our geometry compression on such a hierarchy achieves compression ratios of 3:1 to 12:1. Our scheme is not only suitable for fast decompression on the CPU, but also for parallel decoding on the GPU with peak throughput over 2 billion triangles per second. Each terrain patch is independently decompressed on the fly from a variable-rate bitstream by a GPU geometry program with no branches or conditionals. Thus we can store the geometry compressed on the GPU, reducing storage and bandwidth requirements throughout the system. In our rendering approach, only compressed bitstreams and the decoded height values in the view-dependent 'cut' are explicitly stored on the GPU. Normal vectors are computed in a streaming fashion, and remaining geometry and texture coordinates, as well as mesh connectivity, are shared and re-used for all patches. We demonstrate and evaluate our algorithms on a small prototype system in which all compressed geometry fits in the GPU memory and decompression occurs on the fly every rendering frame without any cache maintenance.

Uniform illumination rendering using an array of LEDs: a signal processing perspective

NARCIS (Netherlands)

Yang, Hongming; Bergmans, J.W.M.; Schenk, T.C.W.; Linnartz, J.P.M.G.; Rietman, R.

2009-01-01

An array of a large number of LEDs will be widely used in future indoor illumination systems. In this paper, we investigate the problem of rendering uniform illumination by a regular LED array on the ceiling of a room. We first present two general results on the scaling property of the basic

High-performance GPU-based rendering for real-time, rigid 2D/3D-image registration and motion prediction in radiation oncology.

Science.gov (United States)

Spoerk, Jakob; Gendrin, Christelle; Weber, Christoph; Figl, Michael; Pawiro, Supriyanto Ardjo; Furtado, Hugo; Fabri, Daniella; Bloch, Christoph; Bergmann, Helmar; Gröller, Eduard; Birkfellner, Wolfgang

2012-02-01

A common problem in image-guided radiation therapy (IGRT) of lung cancer as well as other malignant diseases is the compensation of periodic and aperiodic motion during dose delivery. Modern systems for image-guided radiation oncology allow for the acquisition of cone-beam computed tomography data in the treatment room as well as the acquisition of planar radiographs during the treatment. A mid-term research goal is the compensation of tumor target volume motion by 2D/3D Registration. In 2D/3D registration, spatial information on organ location is derived by an iterative comparison of perspective volume renderings, so-called digitally rendered radiographs (DRR) from computed tomography volume data, and planar reference x-rays. Currently, this rendering process is very time consuming, and real-time registration, which should at least provide data on organ position in less than a second, has not come into existence. We present two GPU-based rendering algorithms which generate a DRR of 512×512 pixels size from a CT dataset of 53 MB size at a pace of almost 100 Hz. This rendering rate is feasible by applying a number of algorithmic simplifications which range from alternative volume-driven rendering approaches - namely so-called wobbled splatting - to sub-sampling of the DRR-image by means of specialized raycasting techniques. Furthermore, general purpose graphics processing unit (GPGPU) programming paradigms were consequently utilized. Rendering quality and performance as well as the influence on the quality and performance of the overall registration process were measured and analyzed in detail. The results show that both methods are competitive and pave the way for fast motion compensation by rigid and possibly even non-rigid 2D/3D registration and, beyond that, adaptive filtering of motion models in IGRT. Copyright © 2011. Published by Elsevier GmbH.

High-performance GPU-based rendering for real-time, rigid 2D/3D-image registration and motion prediction in radiation oncology

Energy Technology Data Exchange (ETDEWEB)

Spoerk, Jakob; Gendrin, Christelle; Weber, Christoph [Medical University of Vienna (Austria). Center of Medical Physics and Biomedical Engineering] [and others

2012-07-01

A common problem in image-guided radiation therapy (IGRT) of lung cancer as well as other malignant diseases is the compensation of periodic and aperiodic motion during dose delivery. Modern systems for image-guided radiation oncology allow for the acquisition of cone-beam computed tomography data in the treatment room as well as the acquisition of planar radiographs during the treatment. A mid-term research goal is the compensation of tumor target volume motion by 2D/3D Registration. In 2D/3D registration, spatial information on organ location is derived by an iterative comparison of perspective volume renderings, so-called digitally rendered radiographs (DRR) from computed tomography volume data, and planar reference X-rays. Currently, this rendering process is very time consuming, and real-time registration, which should at least provide data on organ position in less than a second, has not come into existence. We present two GPU-based rendering algorithms which generate a DRR of 512 x 512 pixels size from a CT dataset of 53 MB size at a pace of almost 100 Hz. This rendering rate is feasible by applying a number of algorithmic simplifications which range from alternative volume-driven rendering approaches - namely so-called wobbled splatting - to sub-sampling of the DRR-image by means of specialized raycasting techniques. Furthermore, general purpose graphics processing unit (GPGPU) programming paradigms were consequently utilized. Rendering quality and performance as well as the influence on the quality and performance of the overall registration process were measured and analyzed in detail. The results show that both methods are competitive and pave the way for fast motion compensation by rigid and possibly even non-rigid 2D/3D registration and, beyond that, adaptive filtering of motion models in IGRT. (orig.)

49 CFR 40.263 - What happens when an employee is unable to provide a sufficient amount of saliva for an alcohol...

Science.gov (United States)

2010-10-01

... sufficient amount of saliva for an alcohol screening test? (a) As the STT, you must take the following steps if an employee is unable to provide sufficient saliva to complete a test on a saliva screening device (e.g., the employee does not provide sufficient saliva to activate the device). (1) You must conduct...

Detection of Prion Proteins and TSE Infectivity in the Rendering and Biodiesel Manufacture Processes

Energy Technology Data Exchange (ETDEWEB)

Brown, R.; Keller, B.; Oleschuk, R. [Queen' s University, Kingston, Ontario (Canada)

2007-03-15

This paper addresses emerging issues related to monitoring prion proteins and TSE infectivity in the products and waste streams of rendering and biodiesel manufacture processes. Monitoring is critical to addressing the knowledge gaps identified in 'Biodiesel from Specified Risk Material Tallow: An Appraisal of TSE Risks and their Reduction' (IEA's AMF Annex XXX, 2006) that prevent comprehensive risk assessment of TSE infectivity in products and waste. The most important challenge for monitoring TSE risk is the wide variety of sample types, which are generated at different points in the rendering/biodiesel production continuum. Conventional transmissible spongiform encephalopathy (TSE) assays were developed for specified risk material (SRM) and other biological tissues. These, however, are insufficient to address the diverse sample matrices produced in rendering and biodiesel manufacture. This paper examines the sample types expected in rendering and biodiesel manufacture and the implications of applying TSE assay methods to them. The authors then discuss a sample preparation filtration, which has not yet been applied to these sample types, but which has the potential to provide or significantly improve TSE monitoring. The main improvement will come from transfer of the prion proteins from the sample matrix to a matrix compatible with conventional and emerging bioassays. A second improvement will come from preconcentrating the prion proteins, which means transferring proteins from a larger sample volume into a smaller volume for analysis to provide greater detection sensitivity. This filtration method may also be useful for monitoring other samples, including wash waters and other waste streams, which may contain SRM, including those from abattoirs and on-farm operations. Finally, there is a discussion of emerging mass spectrometric methods, which Prusiner and others have shown to be suitable for detection and characterisation of prion proteins (Stahl

An economic analysis of localized pollution: rendering emissions in a residential setting

Science.gov (United States)

J. Michael Bowker; H.F. MacDonald

1991-01-01

The contingent value method is employed to estimate economic damages to households resulting from rendering plant emissions in a small town. Household willingness to accept (WTA) and willingness to pay (WTP) are estimated individually and in aggregate. The influence of household characteristics on WTP and WTA is examined via regression models. The perception of health...

Mesophilic and thermophilic anaerobic co-digestion of rendering plant and slaughterhouse wastes.

Science.gov (United States)

Bayr, Suvi; Rantanen, Marianne; Kaparaju, Prasad; Rintala, Jukka

2012-01-01

Co-digestion of rendering and slaughterhouse wastes was studied in laboratory scale semi-continuously fed continuously stirred tank reactors (CSTRs) at 35 and 55 °C. All in all, 10 different rendering plant and slaughterhouse waste fractions were characterised showing high contents of lipids and proteins, and methane potentials of 262-572 dm(3)CH(4)/kg volatile solids(VS)(added). In mesophilic CSTR methane yields of ca 720 dm(3) CH(4)/kg VS(fed) were obtained with organic loading rates (OLR) of 1.0 and 1.5 kg VS/m(3) d, and hydraulic retention time (HRT) of 50 d. For thermophilic process, the lowest studied OLR of 1.5 kg VS/m(3) d, turned to be unstable after operation of 1.5 HRT, due to accumulating ammonia, volatile fatty acids (VFAs) and probably also long chain fatty acids (LCFAs). In conclusion, mesophilic process was found to be more feasible for co-digestion than thermophilic process, methane yields being higher and process more stable in mesophilic conditions. Copyright © 2011 Elsevier Ltd. All rights reserved.

Rendering Large-Scale Terrain Models and Positioning Objects in Relation to 3D Terrain

National Research Council Canada - National Science Library

Hittner, Brian

2003-01-01

.... Rendering large scale landscapes based on 3D geometry generally did not occur because the scenes generated tended to use up too much system memory and overburden 3D graphics cards with too many polygons...

3D-TV System with Depth-Image-Based Rendering Architectures, Techniques and Challenges

CERN Document Server

Zhao, Yin; Yu, Lu; Tanimoto, Masayuki

2013-01-01

Riding on the success of 3D cinema blockbusters and advances in stereoscopic display technology, 3D video applications have gathered momentum in recent years. 3D-TV System with Depth-Image-Based Rendering: Architectures, Techniques and Challenges surveys depth-image-based 3D-TV systems, which are expected to be put into applications in the near future. Depth-image-based rendering (DIBR) significantly enhances the 3D visual experience compared to stereoscopic systems currently in use. DIBR techniques make it possible to generate additional viewpoints using 3D warping techniques to adjust the perceived depth of stereoscopic videos and provide for auto-stereoscopic displays that do not require glasses for viewing the 3D image.   The material includes a technical review and literature survey of components and complete systems, solutions for technical issues, and implementation of prototypes. The book is organized into four sections: System Overview, Content Generation, Data Compression and Transmission, and 3D V...

3D virtual rendering in thoracoscopic treatment of congenital malformation of the lung

Directory of Open Access Journals (Sweden)

Destro F.

2013-10-01

Full Text Available Introduction: Congenital malformations of the lung (CML are rare but potentially dangerous congenital malformations. Their identification is important in order to define the most appropriate management. Materials and methods: We retrospectively reviewed data from 37 patients affected by CML treated in our Pediatric Surgery Unit in the last four years with minimally invasive surgery (MIS. Results: Prenatal diagnosis was possible in 26/37 patients. Surgery was performed in the first month of life in 3 symptomatic patients and between 6 and 12 months in the others. All patients underwent radiological evaluation prior to thoracoscopic surgery. Images collected were reconstructed using the VR render software. Discussion and conclusions: Volume rendering gives high anatomical resolution and it can be useful to guide the surgical procedure. Thoracoscopy should be the technique of choice because it is safe, effective and feasible. Furthermore it has the benefit of a minimal access technique and it can be easily performed in children.

A Practical Framework for Sharing and Rendering Real-World Bidirectional Scattering Distribution Functions

Energy Technology Data Exchange (ETDEWEB)

Ward, Greg [Anywhere Software, Albany, CA (United States); Kurt, Murat [International Computer Institute, Ege University (Turkey); Bonneel, Nicolas [Harvard Univ., Cambridge, MA (United States)

2012-09-30

The utilization of real-world materials has been hindered by a lack of standards for sharing and interpreting measured data. This paper presents an XML representation and an Open Source C library to support bidirectional scattering distribution functions (BSDFs) in data-driven lighting simulation and rendering applications.The library provides for the efficient representation, query, and Monte Carlo sampling of arbitrary BSDFs in amodel-free framework. Currently, we support two BSDF data representations: one using a fixed subdivision of thehemisphere, and one with adaptive density. The fixed type has advantages for certain matrix operations, while theadaptive type can more accurately represent highly peaked data. We discuss advanced methods for data-drivenBSDF rendering for both types, including the proxy of detailed geometry to enhance appearance and accuracy.We also present an advanced interpolation method to reduce measured data into these standard representations.We end with our plan for future extensions and sharing of BSDF data.

Binaural Rendering in MPEG Surround

Directory of Open Access Journals (Sweden)

Kristofer Kjörling

2008-04-01

Full Text Available This paper describes novel methods for evoking a multichannel audio experience over stereo headphones. In contrast to the conventional convolution-based approach where, for example, five input channels are filtered using ten head-related transfer functions, the current approach is based on a parametric representation of the multichannel signal, along with either a parametric representation of the head-related transfer functions or a reduced set of head-related transfer functions. An audio scene with multiple virtual sound sources is represented by a mono or a stereo downmix signal of all sound source signals, accompanied by certain statistical (spatial properties. These statistical properties of the sound sources are either combined with statistical properties of head-related transfer functions to estimate “binaural parameters” that represent the perceptually relevant aspects of the auditory scene or used to create a limited set of combined head-related transfer functions that can be applied directly on the downmix signal. Subsequently, a binaural rendering stage reinstates the statistical properties of the sound sources by applying the estimated binaural parameters or the reduced set of combined head-related transfer functions directly on the downmix. If combined with parametric multichannel audio coders such as MPEG Surround, the proposed methods are advantageous over conventional methods in terms of perceived quality and computational complexity.

Forensic 3D Visualization of CT Data Using Cinematic Volume Rendering: A Preliminary Study.

Science.gov (United States)

Ebert, Lars C; Schweitzer, Wolf; Gascho, Dominic; Ruder, Thomas D; Flach, Patricia M; Thali, Michael J; Ampanozi, Garyfalia

2017-02-01

The 3D volume-rendering technique (VRT) is commonly used in forensic radiology. Its main function is to explain medical findings to state attorneys, judges, or police representatives. New visualization algorithms permit the generation of almost photorealistic volume renderings of CT datasets. The objective of this study is to present and compare a variety of radiologic findings to illustrate the differences between and the advantages and limitations of the current VRT and the physically based cinematic rendering technique (CRT). Seventy volunteers were shown VRT and CRT reconstructions of 10 different cases. They were asked to mark the findings on the images and rate them in terms of realism and understandability. A total of 48 of the 70 questionnaires were returned and included in the analysis. On the basis of most of the findings presented, CRT appears to be equal or superior to VRT with respect to the realism and understandability of the visualized findings. Overall, in terms of realism, the difference between the techniques was statistically significant (p 0.05). CRT, which is similar to conventional VRT, is not primarily intended for diagnostic radiologic image analysis, and therefore it should be used primarily as a tool to deliver visual information in the form of radiologic image reports. Using CRT for forensic visualization might have advantages over using VRT if conveying a high degree of visual realism is of importance. Most of the shortcomings of CRT have to do with the software being an early prototype.

Major Deficiencies Preventing Auditors From Rendering Audit Opinions on DOD General Fund Financial Statements

National Research Council Canada - National Science Library

Rauu, Russell

1995-01-01

.... We plan to issue a similar report each year. The audit objective was to identify and summarize the major deficiencies that prevented auditors from rendering audit opinions, other than disclaimers, on Army and Air Force general fund financial...

Pyrite: A blender plugin for visualizing molecular dynamics simulations using industry-standard rendering techniques.

Science.gov (United States)

Rajendiran, Nivedita; Durrant, Jacob D

2018-05-05

Molecular dynamics (MD) simulations provide critical insights into many biological mechanisms. Programs such as VMD, Chimera, and PyMOL can produce impressive simulation visualizations, but they lack many advanced rendering algorithms common in the film and video-game industries. In contrast, the modeling program Blender includes such algorithms but cannot import MD-simulation data. MD trajectories often require many gigabytes of memory/disk space, complicating Blender import. We present Pyrite, a Blender plugin that overcomes these limitations. Pyrite allows researchers to visualize MD simulations within Blender, with full access to Blender's cutting-edge rendering techniques. We expect Pyrite-generated images to appeal to students and non-specialists alike. A copy of the plugin is available at http://durrantlab.com/pyrite/, released under the terms of the GNU General Public License Version 3. © 2017 Wiley Periodicals, Inc. © 2017 Wiley Periodicals, Inc.

Cloud-based Monte Carlo modelling of BSSRDF for the rendering of human skin appearance (Conference Presentation)

Science.gov (United States)

Doronin, Alexander; Rushmeier, Holly E.; Meglinski, Igor; Bykov, Alexander V.

2016-03-01

We present a new Monte Carlo based approach for the modelling of Bidirectional Scattering-Surface Reflectance Distribution Function (BSSRDF) for accurate rendering of human skin appearance. The variations of both skin tissues structure and the major chromophores are taken into account correspondingly to the different ethnic and age groups. The computational solution utilizes HTML5, accelerated by the graphics processing units (GPUs), and therefore is convenient for the practical use at the most of modern computer-based devices and operating systems. The results of imitation of human skin reflectance spectra, corresponding skin colours and examples of 3D faces rendering are presented and compared with the results of phantom studies.

Partitioning of biocides between water and inorganic phases of render

DEFF Research Database (Denmark)

Urbanczyk, Michal; Bollmann, Ulla E.; Bester, Kai

The use of biocides as additives for building materials has gained importance in recent years. These biocides are, e.g., applied to renders and paints to prevent them from microbial spoilage. However, these biocides can leach out into the environment. In order to better understand this leaching...... compared. The partitioning constants for calcium carbonate varied between 0.1 (isoproturon) and 1.1 (iodocarb) and 84.6 (dichlorooctylisothiazolinone), respectively. The results for barite, kaolinite and mica were in a similar range and usually the compounds with high partitioning constants for one mineral...

Simple Coatings to Render Polystyrene Protein Resistant

Directory of Open Access Journals (Sweden)

Marcelle Hecker

2018-02-01

Full Text Available Non-specific protein adsorption is detrimental to the performance of many biomedical devices. Polystyrene is a commonly used material in devices and thin films. Simple reliable surface modification of polystyrene to render it protein resistant is desired in particular for device fabrication and orthogonal functionalisation schemes. This report details modifications carried out on a polystyrene surface to prevent protein adsorption. The trialed surfaces included Pluronic F127 and PLL-g-PEG, adsorbed on polystyrene, using a polydopamine-assisted approach. Quartz crystal microbalance with dissipation (QCM-D results showed only short-term anti-fouling success of the polystyrene surface modified with F127, and the subsequent failure of the polydopamine intermediary layer in improving its stability. In stark contrast, QCM-D analysis proved the success of the polydopamine assisted PLL-g-PEG coating in preventing bovine serum albumin adsorption. This modified surface is equally as protein-rejecting after 24 h in buffer, and thus a promising simple coating for long term protein rejection of polystyrene.

Re-examination of the Controversial Coexistence of Traumatic Brain Injury and Posttraumatic Stress Disorder: Misdiagnosis and Self-Report Measures

OpenAIRE

Sbordone, Robert J.; Ruff, Ronald M.

2010-01-01

The coexistence of traumatic brain injury (TBI) and posttraumatic stress disorder (PTSD) remains a controversial issue in the literature. To address this controversy, we focused primarily on the civilian-related literature of TBI and PTSD. Some investigators have argued that individuals who had been rendered unconscious or suffered amnesia due to a TBI are unable to develop PTSD because they would be unable to consciously experience the symptoms of fear, helplessness, and horror associated wi...

Hot or not: the effects of exogenous testosterone on female attractiveness to male conspecifics in the budgerigar.

Directory of Open Access Journals (Sweden)

Stefanie E P Lahaye

Full Text Available An increasing number of studies indicate that not only females but also males can be selective when choosing a mate. In species exhibiting male or mutual mate choice, females may benefit from being attractive. While male attractiveness is often positively influenced by higher plasma levels of the androgenic hormone testosterone, it has been shown that testosterone can masculinise female behavior and morphology in several bird species, potentially rendering them less attractive. In this study, we investigated whether female budgerigars, Melopsittacusundulatus, suffer from increased plasma testosterone levels through a negative effect on their attractiveness to males. We experimentally increased plasma testosterone levels in testosterone-treated females (T-females compared to controls (C-females and allowed males to choose between a T- and a C-female in a two-way choice situation. Although testosterone treatment significantly affected female behavioral and morphological characteristics, males did not show a significant difference in preference between T- and C-females. These results suggest that experimentally increasing testosterone levels in females does not appear to influence male preference during initial mate choice. Our findings indicate that selection for higher levels of testosterone in male budgerigars is probably not constrained by a correlated response to selection causing negative effects on female attractiveness during initial mate choice. Evaluating whether or not a potential constraint may arise from negative testosterone-induced effects on other fitness related traits in females requires further work.

13 CFR 119.15 - If a grantee is unable to spend the entire amount allotted for a single fiscal year, can the...

Science.gov (United States)

2010-01-01

... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false If a grantee is unable to spend...? 119.15 Section 119.15 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION PROGRAM FOR... combination of both. (b) The request must be made no later than 60 days before the end of the budget/project...

Evaluating Approaches to Rendering Braille Text on a High-Density Pin Display.

Science.gov (United States)

Morash, Valerie S; Russomanno, Alexander; Gillespie, R Brent; OModhrain, Sile

2017-10-13

Refreshable displays for tactile graphics are typically composed of pins that have smaller diameters and spacing than standard braille dots. We investigated configurations of high-density pins to form braille text on such displays using non-refreshable stimuli produced with a 3D printer. Normal dot braille (diameter 1.5 mm) was compared to high-density dot braille (diameter 0.75 mm) wherein each normal dot was rendered by high-density simulated pins alone or in a cluster of pins configured in a diamond, X, or square; and to "blobs" that could result from covering normal braille and high-density multi-pin configurations with a thin membrane. Twelve blind participants read MNREAD sentences displayed in these conditions. For high-density simulated pins, single pins were as quickly and easily read as normal braille, but diamond, X, and square multi-pin configurations were slower and/or harder to read than normal braille. We therefore conclude that as long as center-to-center dot spacing and dot placement is maintained, the dot diameter may be open to variability for rendering braille on a high density tactile display.

Unable to Conform, Unwilling to Rebel? Youth, Culture and Motivation in Globalizing Japan

Directory of Open Access Journals (Sweden)

Tuukka eToivonen

2011-09-01

Full Text Available This paper investigates the effects of globalization on Japanese young adults from sociological and psychological perspectives. While Japan’s socio-economic institutions have shown mainly resistant (or hot reactions to globalization, individual-level adaptations remain oriented towards conformity to dominant life expectations, which remain largely unchanged, despite decreasing rewards. However, a socially withdrawn sub-group (the so-called hikikomori appears to be unable to conform yet is also unwilling to rebel. The experimental evidence we review suggests such youth deviate from typical Japanese motivational patterns but have not necessarily become more Western. This poses serious problems in an interdependence-oriented culture, but the paralysis of this group seems to be an outcome of labor market change rather than a psychopathology. Finally, we also identify a contrasting group – whom we call the quiet mavericks – that adapts in creative and integrative (or "cool" ways by negotiating conformist pressures tactfully. Our account sheds light on just how complex and painful the psychological and sociological effects of globalization can be for young people in conformist societies, with implications to policy and social sustainability.

Efficient Algorithms for Real-Time GPU Volumetric Cloud Rendering with Enhanced Geometry

OpenAIRE

Carlos Jiménez de Parga; Sebastián Rubén Gómez Palomo

2018-01-01

This paper presents several new techniques for volumetric cloud rendering using efficient algorithms and data structures based on ray-tracing methods for cumulus generation, achieving an optimum balance between realism and performance. These techniques target applications such as flight simulations, computer games, and educational software, even with conventional graphics hardware. The contours of clouds are defined by implicit mathematical expressions or triangulated structures inside which ...

Proteinaceous Pheromone Homologs Identified from the Cloacal Gland Transcriptome of a Male Axolotl, Ambystoma mexicanum.

Directory of Open Access Journals (Sweden)

Kevin W Hall

Full Text Available Pheromones play an important role in modifying vertebrate behavior, especially during courtship and mating. Courtship behavior in urodele amphibians often includes female exposure to secretions from the cloacal gland, as well as other scent glands. The first vertebrate proteinaceous pheromone discovered, the decapeptide sodefrin, is a female attracting pheromone secreted by the cloacal gland of male Cynops pyrrhogaster. Other proteinaceous pheromones in salamanders have been shown to elicit responses from females towards conspecific males. The presence and levels of expression of proteinaceous pheromones have not been identified in the family Ambystomatidae, which includes several important research models. The objective of this research was therefore to identify putative proteinaceous pheromones from male axolotls, Ambystoma mexicanum, as well as their relative expression levels. The results indicate that axolotls possess two different forms of sodefrin precursor-like factor (alpha and beta, as well as a putative ortholog of plethodontid modulating factor. The beta form of sodefrin precursor-like factor was amongst the most highly expressed transcripts within the cloacal gland. The ortholog of plethodontid modulating factor was expressed at a level equivalent to the beta sodefrin precursor-like factor. The results are from a single male axolotl; therefore, we are unable to assess how representative our results may be. Nevertheless, the presence of these highly expressed proteinaceous pheromones suggests that male axolotls use multiple chemical cues to attract female conspecifics. Behavioral assays would indicate whether the putative protein pheromones elicit courtship activity from female axolotls.

Proteinaceous Pheromone Homologs Identified from the Cloacal Gland Transcriptome of a Male Axolotl, Ambystoma mexicanum.

Science.gov (United States)

Hall, Kevin W; Eisthen, Heather L; Williams, Barry L

2016-01-01

Pheromones play an important role in modifying vertebrate behavior, especially during courtship and mating. Courtship behavior in urodele amphibians often includes female exposure to secretions from the cloacal gland, as well as other scent glands. The first vertebrate proteinaceous pheromone discovered, the decapeptide sodefrin, is a female attracting pheromone secreted by the cloacal gland of male Cynops pyrrhogaster. Other proteinaceous pheromones in salamanders have been shown to elicit responses from females towards conspecific males. The presence and levels of expression of proteinaceous pheromones have not been identified in the family Ambystomatidae, which includes several important research models. The objective of this research was therefore to identify putative proteinaceous pheromones from male axolotls, Ambystoma mexicanum, as well as their relative expression levels. The results indicate that axolotls possess two different forms of sodefrin precursor-like factor (alpha and beta), as well as a putative ortholog of plethodontid modulating factor. The beta form of sodefrin precursor-like factor was amongst the most highly expressed transcripts within the cloacal gland. The ortholog of plethodontid modulating factor was expressed at a level equivalent to the beta sodefrin precursor-like factor. The results are from a single male axolotl; therefore, we are unable to assess how representative our results may be. Nevertheless, the presence of these highly expressed proteinaceous pheromones suggests that male axolotls use multiple chemical cues to attract female conspecifics. Behavioral assays would indicate whether the putative protein pheromones elicit courtship activity from female axolotls.

Volumetric ambient occlusion for real-time rendering and games.

Science.gov (United States)

Szirmay-Kalos, L; Umenhoffer, T; Toth, B; Szecsi, L; Sbert, M

2010-01-01

This new algorithm, based on GPUs, can compute ambient occlusion to inexpensively approximate global-illumination effects in real-time systems and games. The first step in deriving this algorithm is to examine how ambient occlusion relates to the physically founded rendering equation. The correspondence stems from a fuzzy membership function that defines what constitutes nearby occlusions. The next step is to develop a method to calculate ambient occlusion in real time without precomputation. The algorithm is based on a novel interpretation of ambient occlusion that measures the relative volume of the visible part of the surface's tangent sphere. The new formula's integrand has low variation and thus can be estimated accurately with a few samples.

Three-dimensional rendering of otolith growth using phase contrast synchrotron tomography.

Science.gov (United States)

Mapp, J J I; Fisher, M H; Atwood, R C; Bell, G D; Greco, M K; Songer, S; Hunter, E

2016-05-01

A three-dimensional computer reconstruction of a plaice Pleuronectes platessa otolith is presented from data acquired by the Diamond Light synchrotron, beamline I12, X-ray source, a high energy (53-150 keV) source particularly well suited to the study of dense objects. The data allowed non-destructive rendering of otolith structure, and for the first time allows otolith annuli (internal ring structures) to be analysed in X-ray tomographic images. © 2016 The Fisheries Society of the British Isles.

20 CFR 655.731 - What is the first LCA requirement, regarding wages?

Science.gov (United States)

2010-04-01

... the U.S., caring for ill relative) or render the nonimmigrant unable to work (e.g., maternity leave... payment under the employer's benefit plan or other statutes such as the Family and Medical Leave Act (29 U...

Waqf as a Tool for Rendering Social Welfare Services in the Social Entrepreneurship Context

Directory of Open Access Journals (Sweden)

Md. Mahmudul Alam

2018-01-01

Full Text Available The concept of Islamic entrepreneurship centers on ensuring community well-being as the priority, which is one of the important objectives (Maqasid of the Islamic Shari’ah. Historically, waqf played a significant role in the Islamic economic system, particularly in rendering exemplary welfare services in the areas of healthcare, education, social welfare, environmental, and other community-based programs. However, only a few success stories in recent history have institutionally utilized the properties of waqf under proper management to achieve its substantial objectives. This study uses the literature review as basis to analyze the reasons behind the successful utilization of waqf as an effective tool to ensure social welfare services in the past, as well as how this model can be replicated by considering current contexts. This study will assist Islamic valuecentric entrepreneurs, regulatory authorities, investors, and researchers to gain an overall insight into the potentials of waqf as a tool for rendering commendable social welfare services.

Freely-available, true-color volume rendering software and cryohistology data sets for virtual exploration of the temporal bone anatomy.

Science.gov (United States)

Kahrs, Lüder Alexander; Labadie, Robert Frederick

2013-01-01

Cadaveric dissection of temporal bone anatomy is not always possible or feasible in certain educational environments. Volume rendering using CT and/or MRI helps understanding spatial relationships, but they suffer in nonrealistic depictions especially regarding color of anatomical structures. Freely available, nonstained histological data sets and software which are able to render such data sets in realistic color could overcome this limitation and be a very effective teaching tool. With recent availability of specialized public-domain software, volume rendering of true-color, histological data sets is now possible. We present both feasibility as well as step-by-step instructions to allow processing of publicly available data sets (Visible Female Human and Visible Ear) into easily navigable 3-dimensional models using free software. Example renderings are shown to demonstrate the utility of these free methods in virtual exploration of the complex anatomy of the temporal bone. After exploring the data sets, the Visible Ear appears more natural than the Visible Human. We provide directions for an easy-to-use, open-source software in conjunction with freely available histological data sets. This work facilitates self-education of spatial relationships of anatomical structures inside the human temporal bone as well as it allows exploration of surgical approaches prior to cadaveric testing and/or clinical implementation. Copyright © 2013 S. Karger AG, Basel.

Clinical application of three-dimensional spiral CT cerebral angiography with volume rendering

International Nuclear Information System (INIS)

Duan Shaoyin; Huang Xi'en; Kang Jianghe; Zhang Dantong; Lin Qingchi; Cai Guoxiang; Xu Meixin; Pang Ruilin

2002-01-01

Objective: To study the methodology and assess the clinical value of three-dimensional CT angiography (3D-CTA) with volume rendering (VR) in cerebral vessels. Methods: Sixty-two patients were examined by means of 3D-CTA with volume rendering. VR was used in the reconstruction of 3D images, and the demonstration of normal vessels and vascular lesions were particularly analyzed. At the same time, comparisons were made between the images of VR and SSD, MIP, and also between the diagnosis of VR-CTA and DSA or postoperative results. Results: In VR images, cerebral vessel routes and vessel cavities were showed clearly, while the relationship among vascular lesions, surrounding vessels, and neighboring structure was distinguished. 50 cases (80.6%) were found positive, 48 of which were correct and 2 were false-positive compared with DSA or postoperative results. The accurate rate of diagnosis was 96.0%. There was no obvious difference in showing the cerebral vessel among the images of VR, SSD and MIP (P > 0.25). Conclusion: Three-dimensional CT cerebral angiography with VR is a new noninvasive effective method. It can even partly replace the DSA. The 3D-images have the characteristics of showing the cerebral vascular cavity and overlapped vessels without cutting the skull

An interactive tool for CT volume rendering and sagittal plane-picking of the prostate for radiotherapy treatment planning

International Nuclear Information System (INIS)

Jani, Ashesh B.; Pelizzari, Charles A.; Chen, George T.Y.; Grzezcszuk, Robert P.; Vijayakumar, Srinivasan

1997-01-01

Objective: Accurate and precise target volume and critical structure definition is a basic necessity in radiotherapy. The prostate, particularly the apex (an important potential site of recurrence in prostate cancer patients), is a challenging structure to define using any modality, including conventional axial CT. Invasive or expensive techniques, such as retrograde urethrography or MRI, could be avoided if localization of the prostate were possible using information already available on the planning CT. Our primary objective was to build a software tool to determine whether volume rendering and sagittal plane-picking, which are CT-based, noninvasive visualization techniques, were of utility in radiotherapy treatment planning for the prostate. Methods: Using AVS (Application Visualization System) on a Silicon Graphics Indigo 2 High Impact workstation, we have developed a tool that enables the clinician to efficiently navigate a CT volume and to use volume rendering and sagittal plane-picking to better define structures at any anatomic site. We applied the tool to the specific example of the prostate to compare the two visualization techniques with the current standard of axial CT. The prostate was defined on 80-slice CT scans (scanning thickness 4mm, pixel size 2mm x 2mm) of prostate cancer patients using axial CT images, volume-rendered CT images, and sagittal plane-picked images. Results: The navigation of the prostate using the different visualization techniques qualitatively demonstrated that the sagittal plane-picked images, and even more so the volume-rendered images, revealed the prostate (particularly the lower border) better in relationship to the surrounding regional anatomy (bladder, rectum, pelvis, and penile structures) than did the axial images. A quantitative comparison of the target volumes obtained by navigating using the different visualization techniques demonstrated that, when compared to the prostate volume defined on axial CT, a larger volume

Sexual characteristics and spermatogenesis in males of the parthenogenetic gecko Lepidodactylus lugubris (Reptilia, Gekkonidae).

Science.gov (United States)

Röll, Beate; von Düring, Monika U G

2008-01-01

ability for a premeiotic endomitosis from their all-female ancestral lineage. While in females this leads to quasi-normal meiosis and diploid oocytes capable of development, the small nuclei of the spermatozoa are unable to contain a diploid set of chromosomes. Because of the high amount of deformed spermatozoa and possibly uncontrolled loss of genetic material in structurally normal, but aneuploid spermatozoa we conclude that these otherwise perfect males are infertile, thus constituting another example of gametic sterility.

Advanced Audiovisual Rendering, Gesture-Based Interaction and Distributed Delivery for Immersive and Interactive Media Services

NARCIS (Netherlands)

Niamut, O.A.; Kochale, A.; Ruiz Hidalgo, J.; Macq, J-F.; Kienast, G.

2011-01-01

The media industry is currently being pulled in the often-opposing directions of increased realism (high resolution, stereoscopic, large screen) and personalisation (selection and control of content, availability on many devices). A capture, production, delivery and rendering system capable of

An image-based approach to the rendering of crowds in real-time

OpenAIRE

Tecchia, Franco

2007-01-01

The wide use of computer graphics in games, entertainment, medical, architectural and cultural applications, has led it to becoming a prevalent area of research. Games and entertainment in general have become one of the driving forces of the real-time computer graphics industry, bringing reasonably realistic, complex and appealing virtual worlds to the mass-market. At the current stage of technology, an user can interactively navigate through complex, polygon-based scenes rendered with sophis...

Attenuated Mycobacterium tuberculosis SO2 vaccine candidate is unable to induce cell death.

Directory of Open Access Journals (Sweden)

Adriana Aporta

Full Text Available It has been proposed that Mycobacterium tuberculosis virulent strains inhibit apoptosis and trigger cell death by necrosis of host macrophages to evade innate immunity, while non-virulent strains induce typical apoptosis activating a protective host response. As part of the characterization of a novel tuberculosis vaccine candidate, the M. tuberculosis phoP mutant SO2, we sought to evaluate its potential to induce host cell death. The parental M. tuberculosis MT103 strain and the current vaccine against tuberculosis Bacillus Calmette-Guérin (BCG were used as comparators in mouse models in vitro and in vivo. Our data reveal that attenuated SO2 was unable to induce apoptotic events neither in mouse macrophages in vitro nor during lung infection in vivo. In contrast, virulent MT103 triggers typical apoptotic events with phosphatidylserine exposure, caspase-3 activation and nuclear condensation and fragmentation. BCG strain behaved like SO2 and did not induce apoptosis. A clonogenic survival assay confirmed that viability of BCG- or SO2-infected macrophages was unaffected. Our results discard apoptosis as the protective mechanism induced by SO2 vaccine and provide evidence for positive correlation between classical apoptosis induction and virulent strains, suggesting apoptosis as a possible virulence determinant during M. tuberculosis infection.

3D Volume Rendering and 3D Printing (Additive Manufacturing).

Science.gov (United States)

Katkar, Rujuta A; Taft, Robert M; Grant, Gerald T

2018-07-01

Three-dimensional (3D) volume-rendered images allow 3D insight into the anatomy, facilitating surgical treatment planning and teaching. 3D printing, additive manufacturing, and rapid prototyping techniques are being used with satisfactory accuracy, mostly for diagnosis and surgical planning, followed by direct manufacture of implantable devices. The major limitation is the time and money spent generating 3D objects. Printer type, material, and build thickness are known to influence the accuracy of printed models. In implant dentistry, the use of 3D-printed surgical guides is strongly recommended to facilitate planning and reduce risk of operative complications. Copyright © 2018 Elsevier Inc. All rights reserved.

Effect of nanostructured lime-based and silica-based products on the consolidation of historical renders

NARCIS (Netherlands)

Borsoi, G.; Veiga, R.; Santos Silva, A.

2013-01-01

An important operation for the conservation of historical renders is the cohesion restitution of the binderaggregate system, based on the use of materials with consolidating properties. Inorganic consolidants are usually preferred to organic ones due to better compatibility and durability. The aim

Radionuclide cisternography: SPECT and 3D-rendering. Radionuklidzisternographie: SPECT- und 3D-Technik

Energy Technology Data Exchange (ETDEWEB)

Henkes, H; Huber, G; Piepgras, U [Universitaet des Saarlandes, Homburg/Saar (Germany, F.R.). Abt. fuer Neuroradiologie; Hierholzer, J [Freie Univ. Berlin (Germany, F.R.). Strahlenklinik und Poliklinik; Cordes, M [British Columbia Univ., Vancouver, BC (Canada). Belzberg Lab. of Neuroscience

1991-10-01

Radionuclide cisternography is indicated in the clinical work-up for hydrocephalus, when searching for CSF leaks, and when testing whether or not intracranial cystic lesions are communicating with the adjacent subarachnoid space. This paper demonstrates the feasibility and diagnostic value of SPECT and subsequent 3D surface rendering in addition to conventional rectilinear CSF imaging in eight patients. Planar images allowed the evaluation of CSF circulation and the detection of CSF fistula. They were advantageous in examinations 48 h after application of {sup 111}In-DTPA. SPECT scans, generated 4-24 h after tracer application, were superior in the delineation of basal cisterns, especially in early scans; this was helpful in patients with pooling due to CSF fistula and in cystic lesions near the skull base. A major drawback was the limited image quality of delayed scans, when the SPECT data were degraded by a low count rate. 3D surface rendering was easily feasible from SPECT data and yielded high quality images. The presentation of the spatial distribution of nuclide-contaminated CSF proved especially helpful in the area of the basal cisterns. (orig.).

Comparative analysis of video processing and 3D rendering for cloud video games using different virtualization technologies

Science.gov (United States)

Bada, Adedayo; Alcaraz-Calero, Jose M.; Wang, Qi; Grecos, Christos

2014-05-01

This paper describes a comprehensive empirical performance evaluation of 3D video processing employing the physical/virtual architecture implemented in a cloud environment. Different virtualization technologies, virtual video cards and various 3D benchmarks tools have been utilized in order to analyse the optimal performance in the context of 3D online gaming applications. This study highlights 3D video rendering performance under each type of hypervisors, and other factors including network I/O, disk I/O and memory usage. Comparisons of these factors under well-known virtual display technologies such as VNC, Spice and Virtual 3D adaptors reveal the strengths and weaknesses of the various hypervisors with respect to 3D video rendering and streaming.

A Semi-automated Approach to Improve the Efficiency of Medical Imaging Segmentation for Haptic Rendering.

Science.gov (United States)

Banerjee, Pat; Hu, Mengqi; Kannan, Rahul; Krishnaswamy, Srinivasan

2017-08-01

The Sensimmer platform represents our ongoing research on simultaneous haptics and graphics rendering of 3D models. For simulation of medical and surgical procedures using Sensimmer, 3D models must be obtained from medical imaging data, such as magnetic resonance imaging (MRI) or computed tomography (CT). Image segmentation techniques are used to determine the anatomies of interest from the images. 3D models are obtained from segmentation and their triangle reduction is required for graphics and haptics rendering. This paper focuses on creating 3D models by automating the segmentation of CT images based on the pixel contrast for integrating the interface between Sensimmer and medical imaging devices, using the volumetric approach, Hough transform method, and manual centering method. Hence, automating the process has reduced the segmentation time by 56.35% while maintaining the same accuracy of the output at ±2 voxels.

Supportive Organisational Cultures and their effects on Male Civil Engineers

Directory of Open Access Journals (Sweden)

Valarie Francis

2012-11-01

Full Text Available Substantial changes, not only in the demographic composition of the Australian workforce, but also,in the roles and expectations of men and women, have led to organisational and employee attempts to reconcile work and non-work demands. Research suggests that when work-family balance practices are introduced they can greatly enhance organisational efficency. However factors embedded in the organisational culture can undermine these policies rendering them ineffective. This quantitative study examined the relationship between the perceptions of a supportive work culture and some work and non-work experiences of Australian male civil engineers. The research investigated the prevalence of organisational values supportive of work-life balances as well as the level of work-family conflict perceived by those engineers. This paper reports some initial results of the study. These indicated that male civil engineers experienced moderate levels of work-family conflict but do not perceive their organisations to be very supportive of employee nneeds to balance work and personal life. However those that reported a supportive work environment also reported higher levels of organisational commitment, greater job and life satisfaction as well as lower level of work-family conflict and lower intentions to quit. The implications of the findings for organisations employing civil engineers are discussed.

Supportive Organisational Cultures and their effects on Male Civil Engineers

Directory of Open Access Journals (Sweden)

Valarie Francis

2012-11-01

Full Text Available Substantial changes, not only in the demographic composition of the Australian workforce, but also,in the roles and expectations of men and women, have led to organisational and employee attempts to reconcile work and non-work demands. Research suggests that when work-family balance practices are introduced they can greatly enhance organisational efficency. However factors embedded in the organisational culture can undermine these policies rendering them ineffective. This quantitative study examined the relationship between the perceptions of a supportive work culture and some work and non-work experiences of Australian male civil engineers. The research investigated the prevalence of organisational values supportive of work-life balances as well as the level of work-family conflict perceived by those engineers. This paper reports some initial results of the study. These indicated that male civil engineers experienced moderate levels of work-family conflict but do not perceive their organisations to be very supportive of employee nneeds to balance work and personal life. However those that reported a supportive work environment also reported higher levels of organisational commitment, greater job and life satisfaction as well as lower level of work-family conflict and lower intentions to quit. The implications of the findings for organisations employing civil engineers are discussed.   

Virtual Whipple: preoperative surgical planning with volume-rendered MDCT images to identify arterial variants relevant to the Whipple procedure.

Science.gov (United States)

Brennan, Darren D; Zamboni, Giulia; Sosna, Jacob; Callery, Mark P; Vollmer, Charles M V; Raptopoulos, Vassilios D; Kruskal, Jonathan B

2007-05-01

The purposes of this study were to combine a thorough understanding of the technical aspects of the Whipple procedure with advanced rendering techniques by introducing a virtual Whipple procedure and to evaluate the utility of this new rendering technique in prediction of the arterial variants that cross the anticipated surgical resection plane. The virtual Whipple is a novel technique that follows the complex surgical steps in a Whipple procedure. Three-dimensional reconstructed angiographic images are used to identify arterial variants for the surgeon as part of the preoperative radiologic assessment of pancreatic and ampullary tumors.

User evaluation of eight led light sources with different special colour rendering indices R9

DEFF Research Database (Denmark)

Markvart, Jakob; Iversen, Anne; Logadottir, Asta

2013-01-01

In this study we evaluated the influence of the special colour rendering index R9 on subjective red colour perception and Caucasian skin appearance among untrained test subjects. The light sources tested are commercially available LED based light sources with similar correlated colour temperature...

GenExp: an interactive web-based genomic DAS client with client-side data rendering.

Directory of Open Access Journals (Sweden)

Bernat Gel Moreno

Full Text Available BACKGROUND: The Distributed Annotation System (DAS offers a standard protocol for sharing and integrating annotations on biological sequences. There are more than 1000 DAS sources available and the number is steadily increasing. Clients are an essential part of the DAS system and integrate data from several independent sources in order to create a useful representation to the user. While web-based DAS clients exist, most of them do not have direct interaction capabilities such as dragging and zooming with the mouse. RESULTS: Here we present GenExp, a web based and fully interactive visual DAS client. GenExp is a genome oriented DAS client capable of creating informative representations of genomic data zooming out from base level to complete chromosomes. It proposes a novel approach to genomic data rendering and uses the latest HTML5 web technologies to create the data representation inside the client browser. Thanks to client-side rendering most position changes do not need a network request to the server and so responses to zooming and panning are almost immediate. In GenExp it is possible to explore the genome intuitively moving it with the mouse just like geographical map applications. Additionally, in GenExp it is possible to have more than one data viewer at the same time and to save the current state of the application to revisit it later on. CONCLUSIONS: GenExp is a new interactive web-based client for DAS and addresses some of the short-comings of the existing clients. It uses client-side data rendering techniques resulting in easier genome browsing and exploration. GenExp is open source under the GPL license and it is freely available at http://gralggen.lsi.upc.edu/recerca/genexp.

Latency in Distributed Acquisition and Rendering for Telepresence Systems.

Science.gov (United States)

Ohl, Stephan; Willert, Malte; Staadt, Oliver

2015-12-01

Telepresence systems use 3D techniques to create a more natural human-centered communication over long distances. This work concentrates on the analysis of latency in telepresence systems where acquisition and rendering are distributed. Keeping latency low is important to immerse users in the virtual environment. To better understand latency problems and to identify the source of such latency, we focus on the decomposition of system latency into sub-latencies. We contribute a model of latency and show how it can be used to estimate latencies in a complex telepresence dataflow network. To compare the estimates with real latencies in our prototype, we modify two common latency measurement methods. This presented methodology enables the developer to optimize the design, find implementation issues and gain deeper knowledge about specific sources of latency.

Application of bacteriophages to reduce biofilms formed by hydrogen sulfide producing bacteria on surfaces in a rendering plant.

Science.gov (United States)

Gong, Chao; Jiang, Xiuping

2015-08-01

Hydrogen sulfide producing bacteria (SPB) in raw animal by-products are likely to grow and form biofilms in the rendering processing environments, resulting in the release of harmful hydrogen sulfide (H2S) gas. The objective of this study was to reduce SPB biofilms formed on different surfaces typically found in rendering plants by applying a bacteriophage cocktail. Using a 96-well microplate method, we determined that 3 SPB strains of Citrobacter freundii and Hafnia alvei are strong biofilm formers. Application of 9 bacteriophages (10(7) PFU/mL) from families of Siphoviridae and Myoviridae resulted in a 33%-70% reduction of biofilm formation by each SPB strain. On stainless steel and plastic templates, phage treatment (10(8) PFU/mL) reduced the attached cells of a mixed SPB culture (no biofilm) by 2.3 and 2.7 log CFU/cm(2) within 6 h at 30 °C, respectively, as compared with 2 and 1.5 log CFU/cm(2) reductions of SPB biofilms within 6 h at 30 °C. Phage treatment was also applied to indigenous SPB biofilms formed on the environmental surface, stainless steel, high-density polyethylene plastic, and rubber templates in a rendering plant. With phage treatment (10(9) PFU/mL), SPB biofilms were reduced by 0.7-1.4, 0.3-0.6, and 0.2-0.6 log CFU/cm(2) in spring, summer, and fall trials, respectively. Our study demonstrated that bacteriophages could effectively reduce the selected SPB strains either attached to or in formed biofilms on various surfaces and could to some extent reduce the indigenous SPB biofilms on the surfaces in the rendering environment.

3D cinematic rendering of the calvarium, maxillofacial structures, and skull base: preliminary observations.

Science.gov (United States)

Rowe, Steven P; Zinreich, S James; Fishman, Elliot K

2018-06-01

Three-dimensional (3D) visualizations of volumetric data from CT have gained widespread clinical acceptance and are an important method for evaluating complex anatomy and pathology. Recently, cinematic rendering (CR), a new 3D visualization methodology, has become available. CR utilizes a lighting model that allows for the production of photorealistic images from isotropic voxel data. Given how new this technique is, studies to evaluate its clinical utility and any potential advantages or disadvantages relative to other 3D methods such as volume rendering have yet to be published. In this pictorial review, we provide examples of normal calvarial, maxillofacial, and skull base anatomy and pathological conditions that highlight the potential for CR images to aid in patient evaluation and treatment planning. The highly detailed images and nuanced shadowing that are intrinsic to CR are well suited to the display of the complex anatomy in this region of the body. We look forward to studies with CR that will ascertain the ultimate value of this methodology to evaluate calvarium, maxillofacial, and skull base morphology as well as other complex anatomic structures.

Whole Mitochondrial Genome Sequencing and Re-Examination of a Cytoplasmic Male Sterility-Associated Gene in Boro-Taichung-Type Cytoplasmic Male Sterile Rice.

Science.gov (United States)

Kazama, Tomohiko; Toriyama, Kinya

2016-01-01

Nuclear genome substitutions between subspecies can lead to cytoplasmic male sterility (CMS) through incompatibility between nuclear and mitochondrial genomes. Boro-Taichung (BT)-type CMS rice was obtained by substituting the nuclear genome of Oryza sativa subsp. indica cultivar Chinsurah Boro II with that of Oryza sativa subsp. japonica cultivar Taichung 65. In BT-type CMS rice, the mitochondrial gene orf79 is associated with male sterility. A complete sequence of the Boro-type mitochondrial genome responsible for BT-type CMS has not been determined to date. Here, we used pyrosequencing to construct the Boro-type mitochondrial genome. The contiguous sequences were assembled into five circular DNA molecules, four of which could be connected into a single circle. The two resulting subgenomic circles were unable to form a reliable master circle, as recombination between them was scarcely detected. We also found an unequal abundance of DNA molecules for the two loci of atp6. These results indicate the presence of multi-partite DNA molecules in the Boro-type mitochondrial genome. Expression patterns were investigated for Boro-type mitochondria-specific orfs, which were not found in the mitochondria from the standard japonica cultivar Nipponbare. Restorer of fertility 1 (RF1)-dependent RNA processing has been observed in orf79-containing RNA but was not detected in other Boro-type mitochondria-specific orfs, supporting the conclusion that orf79 is a unique CMS-associated gene in Boro-type mitochondria.

Volume-Rendered 3D Display Of MR Angiograms in the Diagnosis of Cerebral Arteriovenous Malformations

Energy Technology Data Exchange (ETDEWEB)

Tsuchiya, K.; Katase, S.; Hachiya, J. [Kyorin Univ. School of Medicine, Tokyo (Japan). Dept. of Radiology; Shiokawa, Y. [Kyorin Univ. School of Medicine, Tokyo (Japan). Dept. of Neurosurgery

2003-11-01

Purpose: To determine whether application of a volume-rendered display of 3D time-of-flight (TOF) MR angiography could assist the diagnosis of cerebral arteriovenous malformations (AVMs). Material and Methods: Volume-rendered 3D images of postcontrast 3D time-of-flight MR angiography were compared with conventional angiograms in 12 patients. The correlation between the 3D images and the operative findings was also analyzed in 5 patients. Results: The 3D-displayed images showed all of the feeders and drainers in 10 and 9 patients, respectively. In all patients, the nidus was three-dimensionally visualized. In 3 patients with hematomas, the relationship between the hematoma and the AVM was well demonstrated. The 3D images corresponded well with the operative findings in the 5 patients. Conclusion: This method is of help in assessing the relationship between the components of an AVM as well as that between an AVM and an associated hematoma.

Volume-Rendered 3D Display Of MR Angiograms in the Diagnosis of Cerebral Arteriovenous Malformations

International Nuclear Information System (INIS)

Tsuchiya, K.; Katase, S.; Hachiya, J.; Shiokawa, Y.

2003-01-01

Purpose: To determine whether application of a volume-rendered display of 3D time-of-flight (TOF) MR angiography could assist the diagnosis of cerebral arteriovenous malformations (AVMs). Material and Methods: Volume-rendered 3D images of postcontrast 3D time-of-flight MR angiography were compared with conventional angiograms in 12 patients. The correlation between the 3D images and the operative findings was also analyzed in 5 patients. Results: The 3D-displayed images showed all of the feeders and drainers in 10 and 9 patients, respectively. In all patients, the nidus was three-dimensionally visualized. In 3 patients with hematomas, the relationship between the hematoma and the AVM was well demonstrated. The 3D images corresponded well with the operative findings in the 5 patients. Conclusion: This method is of help in assessing the relationship between the components of an AVM as well as that between an AVM and an associated hematoma

TransCut: interactive rendering of translucent cutouts.

Science.gov (United States)

Li, Dongping; Sun, Xin; Ren, Zhong; Lin, Stephen; Tong, Yiying; Guo, Baining; Zhou, Kun

2013-03-01

We present TransCut, a technique for interactive rendering of translucent objects undergoing fracturing and cutting operations. As the object is fractured or cut open, the user can directly examine and intuitively understand the complex translucent interior, as well as edit material properties through painting on cross sections and recombining the broken pieces—all with immediate and realistic visual feedback. This new mode of interaction with translucent volumes is made possible with two technical contributions. The first is a novel solver for the diffusion equation (DE) over a tetrahedral mesh that produces high-quality results comparable to the state-of-art finite element method (FEM) of Arbree et al. but at substantially higher speeds. This accuracy and efficiency is obtained by computing the discrete divergences of the diffusion equation and constructing the DE matrix using analytic formulas derived for linear finite elements. The second contribution is a multiresolution algorithm to significantly accelerate our DE solver while adapting to the frequent changes in topological structure of dynamic objects. The entire multiresolution DE solver is highly parallel and easily implemented on the GPU. We believe TransCut provides a novel visual effect for heterogeneous translucent objects undergoing fracturing and cutting operations.

Experimentally nonylphenol-polluted diet induces the expression of silent genes VTG and ERα in the liver of male lizard Podarcis sicula

International Nuclear Information System (INIS)

Verderame, Mariailaria; Prisco, Marina; Andreuccetti, Piero; Aniello, Francesco; Limatola, Ermelinda

2011-01-01

Endocrine Disruptor Chemicals (EDCs) with estrogen-like properties i.e nonylphenol (NP) induce vitellogenin (VTG) synthesis in males of aquatic and semi-aquatic specie. In the oviparous species VTG is a female-specific oestrogen dependent protein. Males are unable to synthesize VTG except after E 2 treatment. This study aimed to verify if NP, administered via food and water, is able to induce the expression of VTG even in males of vertebrates with a terrestrial habitat such as the lizard Podarcis. By means of ICC, ISH, W/B and ELISA we demonstrated that NP induces the presence of VTG in the plasma and its expression in the liver. VTG, undetectable in untreated males, reaches the value of 4.34 μg/μl in the experimental ones. Expression analysis and ISH in the liver showed that an NP-polluted diet also elicits the expression of ERα in the liver which is known to be related to VTG synthesis in Podarcis. - Highlights: → Nonylphenol (NP) polluted diet induces VTG synthesis in a terrestrial vertebrate. → VTG and ERα genes are unexpressed in the liver of untreated male lizards Podarcis. → In the liver cells of NP-treated males the expression of both VTG and ERα occurs. → In treated males VTG synthesis is coupled with ERα expression as in breeding females. - NP-polluted diet induces the expression of ERα and VTG in the liver.

Advantages and disadvantages of 3D ultrasound of thyroid nodules including thin slice volume rendering

Directory of Open Access Journals (Sweden)

Slapa Rafal

2011-01-01

Full Text Available Abstract Background The purpose of this study was to assess the advantages and disadvantages of 3D gray-scale and power Doppler ultrasound, including thin slice volume rendering (TSVR, applied for evaluation of thyroid nodules. Methods The retrospective evaluation by two observers of volumes of 71 thyroid nodules (55 benign, 16 cancers was performed using a new TSVR technique. Dedicated 4D ultrasound scanner with an automatic 6-12 MHz 4D probe was used. Statistical analysis was performed with Stata v. 8.2. Results Multiple logistic regression analysis demonstrated that independent risk factors of thyroid cancers identified by 3D ultrasound include: (a ill-defined borders of the nodule on MPR presentation, (b a lobulated shape of the nodule in the c-plane and (c a density of central vessels in the nodule within the minimal or maximal ranges. Combination of features provided sensitivity 100% and specificity 60-69% for thyroid cancer. Calcification/microcalcification-like echogenic foci on 3D ultrasound proved not to be a risk factor of thyroid cancer. Storage of the 3D data of the whole nodules enabled subsequent evaluation of new parameters and with new rendering algorithms. Conclusions Our results indicate that 3D ultrasound is a practical and reproducible method for the evaluation of thyroid nodules. 3D ultrasound stores volumes comprising the whole lesion or organ. Future detailed evaluations of the data are possible, looking for features that were not fully appreciated at the time of collection or applying new algorithms for volume rendering in order to gain important information. Three-dimensional ultrasound data could be included in thyroid cancer databases. Further multicenter large scale studies are warranted.

Artist rendering of dust grains colliding at low speeds

Science.gov (United States)

2003-01-01

Clues to the formation of planets and planetary rings -- like Saturn's dazzling ring system -- may be found by studying how dust grains interact as they collide at low speeds. To study the question of low-speed dust collisions, NASA sponsored the COLLisions Into Dust Experiment (COLLIDE) at the University of Colorado. It was designed to spring-launch marble-size projectiles into trays of powder similar to space or lunar dust. COLLIDE-1 (1998) discovered that collisions below a certain energy threshold eject no material. COLLIDE-2 was designed to identify where the threshold is. In COLLIDE-2, scientists nudged small projectiles into dust beds and recorded how the dust splashed outward (video frame at top; artist's rendering at bottom). The slowest impactor ejected no material and stuck in the target. The faster impactors produced ejecta; some rebounded while others stuck in the target.

Uniform illumination rendering using an array of LEDs: a signal processing perspective

OpenAIRE

Yang, Hongming; Bergmans, J.W.M.; Schenk, T.C.W.; Linnartz, J.P.M.G.; Rietman, R.

2009-01-01

An array of a large number of LEDs will be widely used in future indoor illumination systems. In this paper, we investigate the problem of rendering uniform illumination by a regular LED array on the ceiling of a room. We first present two general results on the scaling property of the basic illumination pattern, i.e., the light pattern of a single LED, and the setting of LED illumination levels, respectively. Thereafter, we propose to use the relative mean squared error as the cost function ...

Evaluation of the relationship between extremity soft tissue sarcomas and adjacent major vessels using contrast-enhanced multidetector CT and three-dimensional volume-rendered CT angiography - A preliminary study

International Nuclear Information System (INIS)

Li, YangKang; Lin, JianBang; Cai, AiQun; Zhou, XiuGuo; Zheng, Yu; Wei, XiaoLong; Cheng, Ying; Liu, GuoRui

2013-01-01

Background: Accurate description of the relationship between extremity soft tissue sarcoma and the adjacent major vessels is crucial for successful surgery. In addition to magnetic resonance imaging (MRI) or in patients who cannot undergo MRI, two-dimensional (2D) postcontrast computed tomography (CT) images and three-dimensional (3D) volume-rendered CT angiography may be valuable alternative imaging techniques for preoperative evaluation of extremity sarcomas. Purpose: To preoperatively assess extremity sarcomas using multidetector CT (MDCT), with emphasis on postcontrast MDCT images and 3D volume-rendered MDCT angiography in evaluating the relationship between tumors and adjacent major vessels. Material and Methods: MDCT examinations were performed on 13 patients with non-metastatic extremity sarcomas. Conventional CT images and 3D volume-rendered CT angiography were evaluated, with focus on the relationship between tumors and adjacent major vessels. Kappa consistency statistics were performed with surgery serving as the reference standard. Results: The relationship between sarcomas and adjacent vessels was described as one of three patterns: proximity, adhesion, and encasement. Proximity was seen in five cases on postcontrast CT images or in eight cases on volume-rendered images. Adhesion was seen in three cases on both postcontrast CT images and volume-rendered images. Encasement was seen in five cases on postcontrast CT images or in two cases on volume-rendered images. Compared to surgical results, postcontrast CT images had 100% sensitivity, 83.3% specificity, 87.5% positive predictive value, 100% negative predictive value, and 92.3% accuracy in the detection of vascular invasion (κ = 0.843, P = 0.002). 3D volume-rendered CT angiography had 71.4% sensitivity, 100% specificity, 100% positive predictive value, 75% negative predictive value, and 84.6% accuracy in the detection of vascular invasion (κ = 0.698, P = 0.008). On volume-rendered images, all cases

Polyacrylate–water partitioning of biocidal compounds: Enhancing the understanding of biocide partitioning between render and water

DEFF Research Database (Denmark)

Bollmann, Ulla E.; Ou, Yi; Mayer, Philipp

2014-01-01

-N-octylisothiazolinone). The correlation of the polyacrylate-water partition constants with the octanol-water partition constants is significant, but the polyacrylate-water partition constants were predominantly below octanol-water partition constants (Kow). The comparison with render-water distribution constants showed that estimating...

Rendering Future Vegetation Change across Large Regions of the US

Science.gov (United States)

Sant'Anna Dias, Felipe; Gu, Yuting; Agarwalla, Yashika; Cheng, Yiwei; Patil, Sopan; Stieglitz, Marc; Turk, Greg

2015-04-01

We use two Machine Learning techniques, Decision Trees (DT) and Neural Networks (NN), to provide classified images and photorealistic renderings of future vegetation cover at three large regions in the US. The training data used to generate current vegetation cover include Landsat surface reflectance images, USGS Land Cover maps, 50 years of mean annual temperature and precipitation for the period 1950 - 2000, elevation, aspect and slope data. Present vegetation cover was generated on a 100m grid. Future vegetation cover for the period 2061- 2080 was predicted using the 1 km resolution bias corrected data from the NASA Goddard Institute for Space Studies Global Climate Model E simulation. The three test regions encompass a wide range of climatic gradients, topographic variation, and vegetation cover. The central Oregon site covers 19,182 square km and includes the Ochoco and Malheur National Forest. Vegetation cover is 50% evergreen forest and 50% shrubs and scrubland. The northwest Washington site covers 14,182 square km. Vegetation cover is 60% evergreen forest, 14% scrubs, 7% grassland, and 7% barren land. The remainder of the area includes deciduous forest, perennial snow cover, and wetlands. The third site, the Jemez mountain region of north central New Mexico, covers 5,500 square km. Vegetation cover is 47% evergreen forest, 31% shrubs, 13% grasses, and 3% deciduous forest. The remainder of the area includes developed and cultivated areas and wetlands. Using the above mentioned data sets we first trained our DT and NN models to reproduce current vegetation. The land cover classified images were compared directly to the USGS land cover data. The photorealistic generated vegetation images were compared directly to the remotely sensed surface reflectance maps. For all three sites, similarity between generated and observed vegetation cover was quite remarkable. The three trained models were then used to explore what the equilibrium vegetation would look like for

Features and challenges of alcohol abuse treatment in Uganda ...

African Journals Online (AJOL)

Challenges of the Minnesota model not withstanding treatment providers are faced with inadequate skills and facilities rendering them unable to meet the ever increasing demand. Research into culturally adopted treatment intervention strategies is necessary to enhance the effectiveness and treatment of alcohol abuse in ...

Structural and functional studies of Escherichia coli aggregative adherence fimbriae (AAF/V) reveal a deficiency in extracellular matrix binding

DEFF Research Database (Denmark)

Jønsson, Rie; Liu, Bing; Struve, Carsten

2017-01-01

A possesses an inserted helix at the beginning of the donor strand, which together with altered surface electrostatics, renders the protein unable to interact with fibronectin. Hence, here we characterize the first AAF variant with a binding mode that varies from previously described AAFs...

Sexual Selection on male cuticular hydrocarbons via male-male competition and female choice.

Science.gov (United States)

Lane, S M; Dickinson, A W; Tregenza, T; House, C M

2016-07-01

Traditional views of sexual selection assumed that male-male competition and female mate choice work in harmony, selecting upon the same traits in the same direction. However, we now know that this is not always the case and that these two mechanisms often impose conflicting selection on male sexual traits. Cuticular hydrocarbons (CHCs) have been shown to be linked to both social dominance and male attractiveness in several insect species. However, although several studies have estimated the strength and form of sexual selection imposed on male CHCs by female mate choice, none have established whether these chemical traits are also subject to sexual selection via male-male competition. Using a multivariate selection analysis, we estimate and compare sexual selection exerted by male-male competition and female mate choice on male CHC composition in the broad-horned flour beetle Gnatocerus cornutus. We show that male-male competition exerts strong linear selection on both overall CHC abundance and body size in males, while female mate choice exerts a mixture of linear and nonlinear selection, targeting not just the overall amount of CHCs expressed but the relative abundance of specific hydrocarbons as well. We discuss the potential implications of this antagonistic selection with regard to male reproductive success. © 2016 The Authors. Journal of Evolutionary Biology published by John Wiley & Sons Ltd on behalf of European Society for Evolutionary Biology.

Male goat vocalizations stimulate the estrous behavior and LH secretion in anestrous goats that have been previously exposed to bucks.

Science.gov (United States)

Delgadillo, José Alberto; Vielma, Jesús; Hernandez, Horacio; Flores, José Alfredo; Duarte, Gerardo; Fernández, Ilda Graciela; Keller, Matthieu; Gelez, Hélène

2012-09-01

We investigated whether live vocalizations emitted by bucks interacting with anestrous females stimulate secretion of LH, estrous behavior and ovulation in anestrous goats. In experiment 1, bucks rendered sexually active by exposure to long days followed by natural photoperiod were exposed in a light-proof-building to five anestrous females. Buck vocalizations were reproduced through a microphone-amplifier-loudspeaker system to an open pen where one group of goats (n=6) was exposed for 10 days to these live vocalizations. Another group of females (n=6) was isolated from males and vocalizations. The proportion of goats displaying estrous behavior was significantly higher in females exposed to buck vocalizations than in females isolated from males. The proportion of goats that ovulated did not differ between the 2 groups (exposed to males versus isolated). In experiment 2, female goats that either had previous contact with males (n=7), or no previous contact with males (n=7) were exposed to live buck vocalizations, reproduced as described in experiment 1, for 5 days. The number and amplitude of LH pulses did not differ between groups before exposition to buck vocalizations. Five days of exposure to male vocalizations significantly increased LH pulsatility only in females that had previous contact with males, while LH pulse amplitude was not modified. We concluded that live buck vocalizations can stimulate estrous behavior and LH secretion in goats if they have had previous contact with bucks. Copyright © 2012 Elsevier Inc. All rights reserved.

Experimentally nonylphenol-polluted diet induces the expression of silent genes VTG and ER{alpha} in the liver of male lizard Podarcis sicula

Energy Technology Data Exchange (ETDEWEB)

Verderame, Mariailaria; Prisco, Marina; Andreuccetti, Piero [Department of Biological Sciences, Evolutionary and Comparative Biology Division, University Federico II of Naples, Via Mezzocannone 8, 80134 Naples (Italy); Aniello, Francesco [Department of Biological Sciences, Genetic and Molecular Biology Division, University Federico II of Naples, Via Mezzocannone 8, 80134 Naples (Italy); Limatola, Ermelinda, E-mail: limatola@unina.it [Department of Biological Sciences, Evolutionary and Comparative Biology Division, University Federico II of Naples, Via Mezzocannone 8, 80134 Naples (Italy)

2011-05-15

Endocrine Disruptor Chemicals (EDCs) with estrogen-like properties i.e nonylphenol (NP) induce vitellogenin (VTG) synthesis in males of aquatic and semi-aquatic specie. In the oviparous species VTG is a female-specific oestrogen dependent protein. Males are unable to synthesize VTG except after E{sub 2} treatment. This study aimed to verify if NP, administered via food and water, is able to induce the expression of VTG even in males of vertebrates with a terrestrial habitat such as the lizard Podarcis. By means of ICC, ISH, W/B and ELISA we demonstrated that NP induces the presence of VTG in the plasma and its expression in the liver. VTG, undetectable in untreated males, reaches the value of 4.34 {mu}g/{mu}l in the experimental ones. Expression analysis and ISH in the liver showed that an NP-polluted diet also elicits the expression of ER{alpha} in the liver which is known to be related to VTG synthesis in Podarcis. - Highlights: > Nonylphenol (NP) polluted diet induces VTG synthesis in a terrestrial vertebrate. > VTG and ER{alpha} genes are unexpressed in the liver of untreated male lizards Podarcis. > In the liver cells of NP-treated males the expression of both VTG and ER{alpha} occurs. > In treated males VTG synthesis is coupled with ER{alpha} expression as in breeding females. - NP-polluted diet induces the expression of ER{alpha} and VTG in the liver.

31 CFR 500.585 - Payments for services rendered by North Korea to United States aircraft authorized.

Science.gov (United States)

2010-07-01

... North Korea to United States aircraft authorized. 500.585 Section 500.585 Money and Finance: Treasury... TREASURY FOREIGN ASSETS CONTROL REGULATIONS Licenses, Authorizations and Statements of Licensing Policy § 500.585 Payments for services rendered by North Korea to United States aircraft authorized. Payments...

Adult Gli2+/-;Gli3Δ699/+ Male and Female Mice Display a Spectrum of Genital Malformation.

Directory of Open Access Journals (Sweden)

Fei He

Full Text Available Disorders of sexual development (DSD encompass a broad spectrum of urogenital malformations and are amongst the most common congenital birth defects. Although key genetic factors such as the hedgehog (Hh family have been identified, a unifying postnatally viable model displaying the spectrum of male and female urogenital malformations has not yet been reported. Since human cases are diagnosed and treated at various stages postnatally, equivalent mouse models enabling analysis at similar stages are of significant interest. Additionally, all non-Hh based genetic models investigating DSD display normal females, leaving female urogenital development largely unknown. Here, we generated compound mutant mice, Gli2+/-;Gli3Δ699/+, which exhibit a spectrum of urogenital malformations in both males and females upon birth, and also carried them well into adulthood. Analysis of embryonic day (E18.5 and adult mice revealed shortened anogenital distance (AGD, open ventral urethral groove, incomplete fusion of scrotal sac, abnormal penile size and structure, and incomplete testicular descent with hypoplasia in male mice, whereas female mutant mice displayed reduced AGD, urinary incontinence, and a number of uterine anomalies such as vaginal duplication. Male and female fertility was also investigated via breeding cages, and it was identified that male mice were infertile while females were unable to deliver despite becoming impregnated. We propose that Gli2+/-;Gli3Δ699/+ mice can serve as a genetic mouse model for common DSD such as cryptorchidism, hypospadias, and incomplete fusion of the scrotal sac in males, and a spectrum of uterine and vaginal abnormalities along with urinary incontinence in females, which could prove essential in revealing new insights into their equivalent diseases in humans.

Academic attainment and the high school science experiences among high-achieving African American males

Science.gov (United States)

Trice, Rodney Nathaniel

This study examines the educational experiences of high achieving African American males. More specifically, it analyzes the influences on their successful navigation through high school science. Through a series of interviews, observations, questionnaires, science portfolios, and review of existing data the researcher attempted to obtain a deeper understanding of high achieving African American males and their limitations to academic attainment and high school science experiences. The investigation is limited to ten high achieving African American male science students at Woodcrest High School. Woodcrest is situated at the cross section of a suburban and rural community located in the southeastern section of the United States. Although this investigation involves African American males, all of whom are successful in school, its findings should not be generalized to this nor any other group of students. The research question that guided this study is: What are the limitations to academic attainment and the high school science experiences of high achieving African American males? The student participants expose how suspension and expulsion, special education placement, academic tracking, science instruction, and teacher expectation influence academic achievement. The role parents play, student self-concept, peer relationships, and student learning styles are also analyzed. The anthology of data rendered three overarching themes: (1) unequal access to education, (2) maintenance of unfair educational structures, and (3) authentic characterizations of African American males. Often the policies and practices set in place by school officials aid in creating hurdles to academic achievement. These policies and practices are often formed without meaningful consideration of the unintended consequences that may affect different student populations, particularly the most vulnerable. The findings from this study expose that high achieving African American males face major

Lighting design for globally illuminated volume rendering.

Science.gov (United States)

Zhang, Yubo; Ma, Kwan-Liu

2013-12-01

With the evolution of graphics hardware, high quality global illumination becomes available for real-time volume rendering. Compared to local illumination, global illumination can produce realistic shading effects which are closer to real world scenes, and has proven useful for enhancing volume data visualization to enable better depth and shape perception. However, setting up optimal lighting could be a nontrivial task for average users. There were lighting design works for volume visualization but they did not consider global light transportation. In this paper, we present a lighting design method for volume visualization employing global illumination. The resulting system takes into account view and transfer-function dependent content of the volume data to automatically generate an optimized three-point lighting environment. Our method fully exploits the back light which is not used by previous volume visualization systems. By also including global shadow and multiple scattering, our lighting system can effectively enhance the depth and shape perception of volumetric features of interest. In addition, we propose an automatic tone mapping operator which recovers visual details from overexposed areas while maintaining sufficient contrast in the dark areas. We show that our method is effective for visualizing volume datasets with complex structures. The structural information is more clearly and correctly presented under the automatically generated light sources.

Cytoplasmic male sterility-associated chimeric open reading frames identified by mitochondrial genome sequencing of four Cajanus genotypes.

Science.gov (United States)

Tuteja, Reetu; Saxena, Rachit K; Davila, Jaime; Shah, Trushar; Chen, Wenbin; Xiao, Yong-Li; Fan, Guangyi; Saxena, K B; Alverson, Andrew J; Spillane, Charles; Town, Christopher; Varshney, Rajeev K

2013-10-01

The hybrid pigeonpea (Cajanus cajan) breeding technology based on cytoplasmic male sterility (CMS) is currently unique among legumes and displays major potential for yield increase. CMS is defined as a condition in which a plant is unable to produce functional pollen grains. The novel chimeric open reading frames (ORFs) produced as a results of mitochondrial genome rearrangements are considered to be the main cause of CMS. To identify these CMS-related ORFs in pigeonpea, we sequenced the mitochondrial genomes of three C. cajan lines (the male-sterile line ICPA 2039, the maintainer line ICPB 2039, and the hybrid line ICPH 2433) and of the wild relative (Cajanus cajanifolius ICPW 29). A single, circular-mapping molecule of length 545.7 kb was assembled and annotated for the ICPA 2039 line. Sequence annotation predicted 51 genes, including 34 protein-coding and 17 RNA genes. Comparison of the mitochondrial genomes from different Cajanus genotypes identified 31 ORFs, which differ between lines within which CMS is present or absent. Among these chimeric ORFs, 13 were identified by comparison of the related male-sterile and maintainer lines. These ORFs display features that are known to trigger CMS in other plant species and to represent the most promising candidates for CMS-related mitochondrial rearrangements in pigeonpea.

Contemporary and future insights into fertility preservation in male cancer patients.

Science.gov (United States)

Agarwal, Ashok; Ong, Chloe; Durairajanayagam, Damayanthi

2014-03-01

In recent years, survival rates of cancer patients have increased, resulting in a shift of focus from quantity to quality of life. A key aspect of quality of life is fertility potential; patients suffering from iatrogenic infertility often become depressed. Since many cancer therapies-chemotherapy, radiotherapy and/or surgery-and even cancer itself have detrimental effects on the male reproductive system, it is important to preserve fertility before any treatment commences. Currently, the only reliable method of male fertility preservation is sperm banking. For patients who are unable to provide semen samples by the conventional method of masturbation, there are other techniques such as electroejaculation, microsurgical epididymal sperm aspiration and testicular sperm extraction that can be employed. Unfortunately, it is presently impossible to preserve the fertility potential of pre-pubertal patients. Due to the increasing numbers of adolescent cancer patients surviving treatment, extensive research is being conducted into several possible methods such as testicular tissue cryopreservation, xenografting, in vitro gamete maturation and even the creation of artificial gametes. However, in spite of its ease, safety, convenience and many accompanying benefits, sperm banking remains underutilized in cancer patients. There are several barriers involved such as the lack of information and the urgency to begin treatment, but various measures can be put in place to overcome these barriers so that sperm banking can be more widely utilized.

Role of volume rendered 3-D computed tomography in conservative management of trauma-related thoracic injuries.

LENUS (Irish Health Repository)

OʼLeary, Donal Peter

2012-09-01

Pneumatic nail guns are a tool used commonly in the construction industry and are widely available. Accidental injuries from nail guns are common, and several cases of suicide using a nail gun have been reported. Computed tomographic (CT) imaging, together with echocardiography, has been shown to be the gold standard for investigation of these cases. We present a case of a 55-year-old man who presented to the accident and emergency unit of a community hospital following an accidental pneumatic nail gun injury to his thorax. Volume-rendered CT of the thorax allowed an accurate assessment of the thoracic injuries sustained by this patient. As there was no evidence of any acute life-threatening injury, a sternotomy was avoided and the patient was observed closely until discharge. In conclusion, volume-rendered 3-dimensional CT can greatly help in the decision to avoid an unnecessary sternotomy in patients with a thoracic nail gun injury.

The Elephant in the Living Room that No One Wants to Talk about: Why U.S. Anthropologists Are Unable to Acknowledge the End of Culture

Science.gov (United States)

Tanaka, Greg

2009-01-01

Findings from a four-year action research project at a highly diverse, West Coast U.S. university reveal that a large percentage of white students cannot trace their identities to a particular nation in Europe and are, as a result, unable to name the shared meanings of a particular ethnic culture. Each time Latino, Asian American, and African…

Malignant Mesothelioma Mimicking Invasive Mammary Carcinoma in a Male Breast

Directory of Open Access Journals (Sweden)

Mohamed Mokhtar Desouki

2015-01-01

Full Text Available Malignant mesothelioma is an uncommon tumor with strong association with asbestos exposure. Few cases of malignant pleural mesothelioma metastatic to the female breast have been reported. Herein, we presented, for the first time, a case of locally infiltrating malignant pleural mesothelioma forming a mass in the breast of a male as the first pathologically confirmed manifestation of the disease. Breast ultrasound revealed an irregular mass in the right breast which involves the pectoralis muscle. Breast core biopsy revealed a proliferation of neoplastic epithelioid cells mimicking an infiltrating pleomorphic lobular carcinoma. IHC studies showed the cells to be positive for calretinin, CK5/6, WT1, and CK7. The cells were negative for MOC-31, BerEp4, ER, and PR. A final diagnosis of malignant mesothelioma, epithelioid type, was rendered. This case demonstrates the importance of considering a broad differential diagnosis in the setting of atypical presentation with application of a panel of IHC markers.

Nymphs of the common bed bug (Cimex lectularius produce anti-aphrodisiac defence against conspecific males

Directory of Open Access Journals (Sweden)

Harraca Vincent

2010-09-01

Full Text Available Abstract Background Abdominal wounding by traumatic insemination and the lack of a long distance attraction pheromone set the scene for unusual sexual signalling systems. Male bed bugs (Cimex lectularius mount any large, newly fed individual in an attempt to mate. Last instar nymphs overlap in size with mature females, which make them a potential target for interested males. However, nymphs lack the female's specific mating adaptations and may be severely injured by the abdominal wounding. We, therefore, hypothesized that nymphs emit chemical deterrents that act as an honest status signal, which prevents nymph sexual harassment and indirectly reduces energy costs for males. Results Behavioural mating assays showed that males mount nymphs significantly shorter time compared to females, although initial mounting preference was the same. In support of our hypothesis, nymphs experienced the same percentage of mating with sperm transfer as females if they were unable to emit (E-2-hexenal, (E-2-octenal 4-oxo-(E-2-hexenal and 4-oxo-(E-2-octenal, from their dorsal abdominal glands. We report that the aldehydes and 4-oxo-(E-2-hexenal are detected by olfactory receptor neurons housed in smooth and grooved peg sensilla, respectively, on the adult antennae, at biologically relevant concentrations. Behavioural experiments showed that application of 4-oxo-(E-2-hexenal or the two aldehydes at a nymph-emitted ratio, to a male/female pair during mounting initiation, decreased mating frequency to a rate comparable to that of a male/nymph pair. Conclusions By combining behavioural and sensory studies, we show that the nymph-specific alarm pheromone plays an important role in intra-specific communication in the common bed bug. Alarm pheromones are commonly looked upon as a system in predator/prey communication, but here we show that alarm pheromones may be used as multipurpose signals such as decreasing the risk of nymphal mating by males. See commentary: http

Feed-forward volume rendering algorithm for moderately parallel MIMD machines

Science.gov (United States)

Yagel, Roni

1993-01-01

Algorithms for direct volume rendering on parallel and vector processors are investigated. Volumes are transformed efficiently on parallel processors by dividing the data into slices and beams of voxels. Equal sized sets of slices along one axis are distributed to processors. Parallelism is achieved at two levels. Because each slice can be transformed independently of others, processors transform their assigned slices with no communication, thus providing maximum possible parallelism at the first level. Within each slice, consecutive beams are incrementally transformed using coherency in the transformation computation. Also, coherency across slices can be exploited to further enhance performance. This coherency yields the second level of parallelism through the use of the vector processing or pipelining. Other ongoing efforts include investigations into image reconstruction techniques, load balancing strategies, and improving performance.

Color Rendering Index Thermal Stability Improvement of Glass-Based Phosphor-Converted White Light-Emitting Diodes for Solid-State Lighting

Directory of Open Access Journals (Sweden)

Chun-Chin Tsai

2014-01-01

Full Text Available High color rendering index performance has been required for phosphor-converted warm-white light-emitting diodes (PC-WWLEDs in lighting industry. The characteristics of low-temperature fabricated phosphor (yellow: Ce3+:YAG, green: Tb3+:YAG, and red: CaAlClSiN3:Eu2+ doped glass were presented for applications to high color rendering index warm-white-light-emitting diodes. Color coordinates (x, y = (0.36, 0.29, quantum yield (QY = 55.6%, color rending index (CRI = 85.3, and correlated color temperature (CCT = 3923 K were characterized. Glass-based PC-WWLEDs was found able to maintain good thermal stability for long-time high-temperature operation. QY decay, CRI remenance, and chromaticity shift were also analyzed for glass- and silicone-based high-power PC-WLEDs by thermal aging at 150°C and 250°C for industrial test standard’s aging time 1008 hours. Better than the silicone’s, thermal stability of glass-based PC-WLEDs has been improved. The resulted high color rendering index (CRI glass phosphor potentially can be used as a phosphor layer for high-performance and low-cost PC-WLEDs used in next-generation indoor solid-state lighting applications.

Increased risks of upper tract urothelial carcinoma in male and female chinese herbalists.

Science.gov (United States)

Yang, Hsiao-Yu; Wang, Jung-Der; Lo, Tsai-Chang; Chen, Pau-Chung

2011-03-01

It has been shown that herbs that contain aristolochic acid induce urological cancer. Chinese herbalists have easy access to such herbs. Our previous mortality study has shown a significantly increased risk of urological cancer in female but not male herbalists. To re-examine this risk in male herbalists, the incidence of urological cancer was analyzed. We enrolled all 6550 Chinese herbalists in Taiwan registered during 1985-2000, and we retrospectively followed the development of cancer until 2001 by analysis of data collected from the Taiwan Cancer Registry. Standardized incidence ratios (SIRs) were calculated for urological cancers in herbalists and compared with those for the general population in Taiwan. There were 30 newly diagnosed cases of urological cancer and most of them were transitional cell carcinoma (93.1%). The mean age at diagnosis for urothelial carcinoma was 51.6 years, and 51.9% were in the upper urinary tract. After adjustment for age and sex, the SIR for all urological cancers was 3.51 [(95% confidence interval (CI): 2.37-5.01]. When stratified by location, the SIRs for kidney and upper urinary tract cancers and bladder cancer were 4.24 (95% CI: 2.47-6.80) and 2.86 (95% CI: 1.52-4.89), respectively. When analyzed by sex, the SIRs for all urological cancers, kidney and upper urinary tract cancers, and bladder cancer were also significantly increased in male herbalists. The significant risk of urothelial carcinoma noted in male herbalists increases our suspicion that this is an occupational disease that renders regular health assessment of herbalists an urgent necessity. Copyright © 2011 Formosan Medical Association & Elsevier. Published by Elsevier B.V. All rights reserved.

[Rendering surgical care to wounded with neck wounds in an armed conflict].

Science.gov (United States)

Samokhvalov, I M; Zavrazhnov, A A; Fakhrutdinov, A M; Sychev, M I

2001-10-01

The results of rendering of the medical care (the first aid, qualified and specialized) obtained in 172 servicemen with neck injuries who stayed in Republic of Chechnya during the period from 09.08.1999 to 28.07.2000 were analyzed. Basing on the results of analysis and experience of casualties' treatment the authors discuss the problems of sequence and volume of surgical care in this group of casualties with reference to available medical evacuation system, surgical tactics at the stage of specialized care. They also consider the peculiarities of operative treatment of the casualties with neck injuries.

The ras1 function of Schizosaccharomyces pombe mediates pheromone-induced transcription

DEFF Research Database (Denmark)

Nielsen, O; Davey, William John; Egel, R

1992-01-01

Loss of ras1+ function renders fission yeast cells unable to undergo morphological changes in response to mating pheromones, whereas cells carrying activated mutations in ras1 are hyper-responsive. This has led to the suggestion that the ras1 gene product plays a role in mating pheromone signal...

Peeling tests for assessing the cohesion and consolidation characteristics of mortar and render surfaces

Czech Academy of Sciences Publication Activity Database

Drdácký, Miloš; Lesák, Jaroslav; Niedoba, Krzysztof; Valach, Jaroslav

2015-01-01

Roč. 48, č. 6 (2015), s. 1947-1963 ISSN 1359-5997 R&D Projects: GA ČR(CZ) GBP105/12/G059; GA MŠk(CZ) ED1.1.00/02.0060 Institutional support: RVO:68378297 Keywords : peeling test * rendered surface * surface consolidation * cohesion * non-destructive testing Subject RIV: AL - Art, Architecture, Cultural Heritage Impact factor: 2.453, year: 2015 http://link.springer.com/article/10.1617/s11527-014-0285-8

Artist Material BRDF Database for Computer Graphics Rendering

Science.gov (United States)

Ashbaugh, Justin C.

The primary goal of this thesis was to create a physical library of artist material samples. This collection provides necessary data for the development of a gonio-imaging system for use in museums to more accurately document their collections. A sample set was produced consisting of 25 panels and containing nearly 600 unique samples. Selected materials are representative of those commonly used by artists both past and present. These take into account the variability in visual appearance resulting from the materials and application techniques used. Five attributes of variability were identified including medium, color, substrate, application technique and overcoat. Combinations of these attributes were selected based on those commonly observed in museum collections and suggested by surveying experts in the field. For each sample material, image data is collected and used to measure an average bi-directional reflectance distribution function (BRDF). The results are available as a public-domain image and optical database of artist materials at art-si.org. Additionally, the database includes specifications for each sample along with other information useful for computer graphics rendering such as the rectified sample images and normal maps.

Three-dimensional range data compression using computer graphics rendering pipeline.

Science.gov (United States)

Zhang, Song

2012-06-20

This paper presents the idea of naturally encoding three-dimensional (3D) range data into regular two-dimensional (2D) images utilizing computer graphics rendering pipeline. The computer graphics pipeline provides a means to sample 3D geometry data into regular 2D images, and also to retrieve the depth information for each sampled pixel. The depth information for each pixel is further encoded into red, green, and blue color channels of regular 2D images. The 2D images can further be compressed with existing 2D image compression techniques. By this novel means, 3D geometry data obtained by 3D range scanners can be instantaneously compressed into 2D images, providing a novel way of storing 3D range data into its 2D counterparts. We will present experimental results to verify the performance of this proposed technique.

FluoRender: An application of 2D image space methods for 3D and 4D confocal microscopy data visualization in neurobiology research

KAUST Repository

Wan, Yong; Otsuna, Hideo; Chien, Chi-Bin; Hansen, Charles

2012-01-01

2D image space methods are processing methods applied after the volumetric data are projected and rendered into the 2D image space, such as 2D filtering, tone mapping and compositing. In the application domain of volume visualization, most 2D image space methods can be carried out more efficiently than their 3D counterparts. Most importantly, 2D image space methods can be used to enhance volume visualization quality when applied together with volume rendering methods. In this paper, we present and discuss the applications of a series of 2D image space methods as enhancements to confocal microscopy visualizations, including 2D tone mapping, 2D compositing, and 2D color mapping. These methods are easily integrated with our existing confocal visualization tool, FluoRender, and the outcome is a full-featured visualization system that meets neurobiologists' demands for qualitative analysis of confocal microscopy data. © 2012 IEEE.

FluoRender: An application of 2D image space methods for 3D and 4D confocal microscopy data visualization in neurobiology research

KAUST Repository

Wan, Yong

2012-02-01

2D image space methods are processing methods applied after the volumetric data are projected and rendered into the 2D image space, such as 2D filtering, tone mapping and compositing. In the application domain of volume visualization, most 2D image space methods can be carried out more efficiently than their 3D counterparts. Most importantly, 2D image space methods can be used to enhance volume visualization quality when applied together with volume rendering methods. In this paper, we present and discuss the applications of a series of 2D image space methods as enhancements to confocal microscopy visualizations, including 2D tone mapping, 2D compositing, and 2D color mapping. These methods are easily integrated with our existing confocal visualization tool, FluoRender, and the outcome is a full-featured visualization system that meets neurobiologists\\' demands for qualitative analysis of confocal microscopy data. © 2012 IEEE.

Pulmonary nodules: sensitivity of maximum intensity projection versus that of volume rendering of 3D multidetector CT data

NARCIS (Netherlands)

Peloschek, Philipp; Sailer, Johannes; Weber, Michael; Herold, Christian J.; Prokop, Mathias; Schaefer-Prokop, Cornelia

2007-01-01

PURPOSE: To prospectively compare maximum intensity projection (MIP) and volume rendering (VR) of multidetector computed tomographic (CT) data for the detection of small intrapulmonary nodules. MATERIALS AND METHODS: This institutional review board-approved prospective study included 20 oncology

Teachers Teaching in the New Mediascape: Digital Immigrants or "Natural Born Cyborgs"?

Science.gov (United States)

Adams, Catherine A.; Pente, Patti

2011-01-01

Schooled in an earlier time, educators are laboring to find meaningful purchase in new media environments, unable to match the fluency and sophistication of their "digital native" students. Yet is Marc Prensky's portrayal of teachers as "digital immigrants" really an accurate rendering of the today's situation? Drawing on phenomenological and…

Cdc42 is a key regulator of B cell differentiation and is required for antiviral humoral immunity

DEFF Research Database (Denmark)

Burbage, Marianne; Keppler, Selina J; Gasparrini, Francesca

2015-01-01

The small Rho GTPase Cdc42, known to interact with Wiskott-Aldrich syndrome (WAS) protein, is an important regulator of actin remodeling. Here, we show that genetic ablation of Cdc42 exclusively in the B cell lineage is sufficient to render mice unable to mount antibody responses. Indeed Cdc42-de...

Remote Intimations: Performance Art and Environmental Illness

Science.gov (United States)

Bottoms, Stephen; Laffin, Julie

2012-01-01

This article explores and documents the work of leading Midwestern performance artist Julie Laffin, in the years since she developed a serious form of environmental illness (Multiple Chemical Sensitivity). This condition has effectively rendered her housebound and unable to appear in public, so that her previous live performance practice--which…

Surrogate motherhood in illness that does not cause infertility ...

African Journals Online (AJOL)

The threshold requirement for surrogate motherhood requires that a commissioning parent or parents are permanently unable to give birth to a child. The question has arisen of a commissioning mother who suffers from a permanent illness that does not cause infertility but that renders pregnancy a significant health risk to ...

Towards an e-Model for the enhancement of service rendering by SMMEs supporting agencies in South Africa

CSIR Research Space (South Africa)

Ngassam, EK

2009-05-01

Full Text Available of the existing model to an e-model may lead to an effective and efficient service delivery, which in turn could positively impact on SMMEs operational objectives. The proposed e-model forms the basis for the enhancement of the quality of service rendered...

A Case Study of a Hybrid Parallel 3D Surface Rendering Graphics Architecture

DEFF Research Database (Denmark)

Holten-Lund, Hans Erik; Madsen, Jan; Pedersen, Steen

1997-01-01

This paper presents a case study in the design strategy used inbuilding a graphics computer, for drawing very complex 3Dgeometric surfaces. The goal is to build a PC based computer systemcapable of handling surfaces built from about 2 million triangles, andto be able to render a perspective view...... of these on a computer displayat interactive frame rates, i.e. processing around 50 milliontriangles per second. The paper presents a hardware/softwarearchitecture called HPGA (Hybrid Parallel Graphics Architecture) whichis likely to be able to carry out this task. The case study focuses ontechniques to increase...

Post-processing methods of rendering and visualizing 3-D reconstructed tomographic images

Energy Technology Data Exchange (ETDEWEB)

Wong, S.T.C. [Univ. of California, San Francisco, CA (United States)

1997-02-01

The purpose of this presentation is to discuss the computer processing techniques of tomographic images, after they have been generated by imaging scanners, for volume visualization. Volume visualization is concerned with the representation, manipulation, and rendering of volumetric data. Since the first digital images were produced from computed tomography (CT) scanners in the mid 1970s, applications of visualization in medicine have expanded dramatically. Today, three-dimensional (3D) medical visualization has expanded from using CT data, the first inherently digital source of 3D medical data, to using data from various medical imaging modalities, including magnetic resonance scanners, positron emission scanners, digital ultrasound, electronic and confocal microscopy, and other medical imaging modalities. We have advanced from rendering anatomy to aid diagnosis and visualize complex anatomic structures to planning and assisting surgery and radiation treatment. New, more accurate and cost-effective procedures for clinical services and biomedical research have become possible by integrating computer graphics technology with medical images. This trend is particularly noticeable in current market-driven health care environment. For example, interventional imaging, image-guided surgery, and stereotactic and visualization techniques are now stemming into surgical practice. In this presentation, we discuss only computer-display-based approaches of volumetric medical visualization. That is, we assume that the display device available is two-dimensional (2D) in nature and all analysis of multidimensional image data is to be carried out via the 2D screen of the device. There are technologies such as holography and virtual reality that do provide a {open_quotes}true 3D screen{close_quotes}. To confine the scope, this presentation will not discuss such approaches.

Post-processing methods of rendering and visualizing 3-D reconstructed tomographic images

International Nuclear Information System (INIS)

Wong, S.T.C.

1997-01-01

The purpose of this presentation is to discuss the computer processing techniques of tomographic images, after they have been generated by imaging scanners, for volume visualization. Volume visualization is concerned with the representation, manipulation, and rendering of volumetric data. Since the first digital images were produced from computed tomography (CT) scanners in the mid 1970s, applications of visualization in medicine have expanded dramatically. Today, three-dimensional (3D) medical visualization has expanded from using CT data, the first inherently digital source of 3D medical data, to using data from various medical imaging modalities, including magnetic resonance scanners, positron emission scanners, digital ultrasound, electronic and confocal microscopy, and other medical imaging modalities. We have advanced from rendering anatomy to aid diagnosis and visualize complex anatomic structures to planning and assisting surgery and radiation treatment. New, more accurate and cost-effective procedures for clinical services and biomedical research have become possible by integrating computer graphics technology with medical images. This trend is particularly noticeable in current market-driven health care environment. For example, interventional imaging, image-guided surgery, and stereotactic and visualization techniques are now stemming into surgical practice. In this presentation, we discuss only computer-display-based approaches of volumetric medical visualization. That is, we assume that the display device available is two-dimensional (2D) in nature and all analysis of multidimensional image data is to be carried out via the 2D screen of the device. There are technologies such as holography and virtual reality that do provide a open-quotes true 3D screenclose quotes. To confine the scope, this presentation will not discuss such approaches

Male suicide among construction workers in Australia: a qualitative analysis of the major stressors precipitating death.

Science.gov (United States)

Milner, Allison; Maheen, Humaira; Currier, Dianne; LaMontagne, Anthony D

2017-06-19

Suicide rates among those employed in male-dominated professions such as construction are elevated compared to other occupational groups. Thus far, past research has been mainly quantitative and has been unable to identify the complex range of risk and protective factors that surround these suicides. We used a national coronial database to qualitatively study work and non-work related influences on male suicide occurring in construction workers in Australia. We randomly selected 34 cases according to specific sampling framework. Thematic analysis was used to develop a coding structure on the basis of pre-existing theories in job stress research. The following themes were established on the basis of mutual consensus: mental health issues prior to death, transient working experiences (i.e., the inability to obtain steady employment), workplace injury and chronic illness, work colleagues as a source of social support, financial and legal problems, relationship breakdown and child custody issues, and substance abuse. Work and non-work factors were often interrelated pressures prior to death. Suicide prevention for construction workers needs to take a systematic approach, addressing work-level factors as well as helping those at-risk of suicide.

Triadic male-infant-male interaction serves in bond maintenance in male Assamese macaques.

Directory of Open Access Journals (Sweden)

Josefine Kalbitz

Full Text Available While the ultimate consequences of social bonds start to be better understood, the proximate behavioural mechanisms underlying the formation and maintenance of these close affiliative relationships have received less attention. We investigated the possible function of male-infant-male interactions (MIMIs in male-male social bonding processes by analysing about 9000h of focal animal observations collected on two groups of wild Assamese macaques. In support of an agonistic buffering function of MIMIs, after engaging in a MIMI upon approach, subordinates stayed longer in close proximity of a dominant male. Overall, the frequency of MIMIs increased the stronger the affiliative relationship between two males, suggesting that MIMIs like grooming function in relationship maintenance. We did not find support for a role of MIMIs in bond formation as the frequency of MIMIs did not affect the time a male dyad spent in proximity in the consecutive year. Our results contribute to the general debate on behaviours influencing social dynamics in group living mammals.

Rendering Intelligence at Physical Layer for Smart Addressing and Multiple Access

DEFF Research Database (Denmark)

Sanyal, Rajarshi; Prasad, Ramjee; Cianca, Ernestina

2010-01-01

addressing of a node. For a typical closed user group type of network, we propose a multiple access mechanism and network topology which will not only eliminate the need of intelligent core network equipments in the network area , but to use this intelligent physical layer to directly reach any node over......The primary objective of this work is to propose a technique of wireless communication, where we render intelligence to the physical layer. We aim to realize a physical layer that can take part in some processes which is otherwise confined to higher layer signalling activities, like for example...... the fundamentals behind the proposed multiple access scheme and draws out the benefits compared to the existing multiple access processes based on cellular approach....

Scene reassembly after multimodal digitization and pipeline evaluation using photorealistic rendering

DEFF Research Database (Denmark)

Stets, Jonathan Dyssel; Dal Corso, Alessandro; Nielsen, Jannik Boll

2017-01-01

of the lighting environment. This enables pixelwise comparison of photographs of the real scene with renderings of the digital version of the scene. Such quantitative evaluation is useful for verifying acquired material appearance and reconstructed surface geometry, which is an important aspect of digital content......Transparent objects require acquisition modalities that are very different from the ones used for objects with more diffuse reflectance properties. Digitizing a scene where objects must be acquired with different modalities requires scene reassembly after reconstruction of the object surfaces....... This reassembly of a scene that was picked apart for scanning seems unexplored. We contribute with a multimodal digitization pipeline for scenes that require this step of reassembly. Our pipeline includes measurement of bidirectional reflectance distribution functions and high dynamic range imaging...

The dynamics of male-male competition in Cardiocondyla obscurior ants

Directory of Open Access Journals (Sweden)

Cremer Sylvia

2012-06-01

Full Text Available Abstract Background The outcome of male-male competition can be predicted from the relative fighting qualities of the opponents, which often depend on their age. In insects, freshly emerged and still sexually inactive males are morphologically indistinct from older, sexually active males. These young inactive males may thus be easy targets for older males if they cannot conceal themselves from their attacks. The ant Cardiocondyla obscurior is characterised by lethal fighting between wingless (“ergatoid” males. Here, we analyse for how long young males are defenceless after eclosion, and how early adult males can detect the presence of rival males. Results We found that old ergatoid males consistently won fights against ergatoid males younger than two days. Old males did not differentiate between different types of unpigmented pupae several days before emergence, but had more frequent contact to ready-to-eclose pupae of female sexuals and winged males than of workers and ergatoid males. In rare cases, old ergatoid males displayed alleviated biting of pigmented ergatoid male pupae shortly before adult eclosion, as well as copulation attempts to dark pupae of female sexuals and winged males. Ergatoid male behaviour may be promoted by a closer similarity of the chemical profile of ready-to-eclose pupae to the profile of adults than that of young pupae several days prior to emergence. Conclusion Young ergatoid males of C. obscurior would benefit greatly by hiding their identity from older, resident males, as they are highly vulnerable during the first two days of their adult lives. In contrast to the winged males of the same species, which are able to prevent ergatoid male attacks by chemical female mimicry, young ergatoids do not seem to be able to produce a protective chemical profile. Conflicts in male-male competition between ergatoid males of different age thus seem to be resolved in favour of the older males. This might represent selection

Brown and polar bear Y chromosomes reveal extensive male-biased gene flow within brother lineages.

Science.gov (United States)

Bidon, Tobias; Janke, Axel; Fain, Steven R; Eiken, Hans Geir; Hagen, Snorre B; Saarma, Urmas; Hallström, Björn M; Lecomte, Nicolas; Hailer, Frank

2014-06-01

Brown and polar bears have become prominent examples in phylogeography, but previous phylogeographic studies relied largely on maternally inherited mitochondrial DNA (mtDNA) or were geographically restricted. The male-specific Y chromosome, a natural counterpart to mtDNA, has remained underexplored. Although this paternally inherited chromosome is indispensable for comprehensive analyses of phylogeographic patterns, technical difficulties and low variability have hampered its application in most mammals. We developed 13 novel Y-chromosomal sequence and microsatellite markers from the polar bear genome and screened these in a broad geographic sample of 130 brown and polar bears. We also analyzed a 390-kb-long Y-chromosomal scaffold using sequencing data from published male ursine genomes. Y chromosome evidence support the emerging understanding that brown and polar bears started to diverge no later than the Middle Pleistocene. Contrary to mtDNA patterns, we found 1) brown and polar bears to be reciprocally monophyletic sister (or rather brother) lineages, without signals of introgression, 2) male-biased gene flow across continents and on phylogeographic time scales, and 3) male dispersal that links the Alaskan ABC islands population to mainland brown bears. Due to female philopatry, mtDNA provides a highly structured estimate of population differentiation, while male-biased gene flow is a homogenizing force for nuclear genetic variation. Our findings highlight the importance of analyzing both maternally and paternally inherited loci for a comprehensive view of phylogeographic history, and that mtDNA-based phylogeographic studies of many mammals should be reevaluated. Recent advances in sequencing technology render the analysis of Y-chromosomal variation feasible, even in nonmodel organisms. © The Author 2014. Published by Oxford University Press on behalf of the Society for Molecular Biology and Evolution. All rights reserved. For permissions, please e

Using rare earth doped thiosilicate phosphors in white light emitting LEDs: Towards low colour temperature and high colour rendering

International Nuclear Information System (INIS)

Smet, P.F.; Korthout, K.; Haecke, J.E. van; Poelman, D.

2008-01-01

Rare earth doped thiosilicates are promising materials for use in phosphor converted light emitting diodes (pcLEDs). These phosphors (including the hosts Ca 2 SiS 4 , BaSi 2 S 5 and Ba 2 SiS 4 in combination with Ce 3+ and/or Eu 2+ doping) cover the entire visible part of the spectrum, as the emission colour can be changed from deep blue to red. The photoluminescence emission spectrum and the overlap of the excitation spectrum with the emission of pumping LEDs is evaluated. The trade-off between high colour rendering and high electrical-to-optical power efficiency is discussed by simulation with both blue and UV emitting LEDs. Finally, a phosphor combination with low colour temperature (3000 K) and high colour rendering (CRI = 93) is proposed

Segmentation, surface rendering, and surface simplification of 3-D skull images for the repair of a large skull defect

Science.gov (United States)

Wan, Weibing; Shi, Pengfei; Li, Shuguang

2009-10-01

Given the potential demonstrated by research into bone-tissue engineering, the use of medical image data for the rapid prototyping (RP) of scaffolds is a subject worthy of research. Computer-aided design and manufacture and medical imaging have created new possibilities for RP. Accurate and efficient design and fabrication of anatomic models is critical to these applications. We explore the application of RP computational methods to the repair of a pediatric skull defect. The focus of this study is the segmentation of the defect region seen in computerized tomography (CT) slice images of this patient's skull and the three-dimensional (3-D) surface rendering of the patient's CT-scan data. We see if our segmentation and surface rendering software can improve the generation of an implant model to fill a skull defect.

Adaptive proxy map server for efficient vector spatial data rendering

Science.gov (United States)

Sayar, Ahmet

2013-01-01

The rapid transmission of vector map data over the Internet is becoming a bottleneck of spatial data delivery and visualization in web-based environment because of increasing data amount and limited network bandwidth. In order to improve both the transmission and rendering performances of vector spatial data over the Internet, we propose a proxy map server enabling parallel vector data fetching as well as caching to improve the performance of web-based map servers in a dynamic environment. Proxy map server is placed seamlessly anywhere between the client and the final services, intercepting users' requests. It employs an efficient parallelization technique based on spatial proximity and data density in case distributed replica exists for the same spatial data. The effectiveness of the proposed technique is proved at the end of the article by the application of creating map images enriched with earthquake seismic data records.

Chromium: A Stress-Processing Framework for Interactive Rendering on Clusters

International Nuclear Information System (INIS)

Humphreys, G.; Houston, M.; Ng, Y.-R.; Frank, R.; Ahern, S.; Kirchner, P.D.; Klosowski, J.T.

2002-01-01

We describe Chromium, a system for manipulating streams of graphics API commands on clusters of workstations. Chromium's stream filters can be arranged to create sort-first and sort-last parallel graphics architectures that, in many cases, support the same applications while using only commodity graphics accelerators. In addition, these stream filters can be extended programmatically, allowing the user to customize the stream transformations performed by nodes in a cluster. Because our stream processing mechanism is completely general, any cluster-parallel rendering algorithm can be either implemented on top of or embedded in Chromium. In this paper, we give examples of real-world applications that use Chromium to achieve good scalability on clusters of workstations, and describe other potential uses of this stream processing technology. By completely abstracting the underlying graphics architecture, network topology, and API command processing semantics, we allow a variety of applications to run in different environments

Hepatic injury induces contrasting response in liver and kidney to chemicals that are metabolically activated: Role of male sex hormone

International Nuclear Information System (INIS)

Kim, Young C.; Yim, Hye K.; Jung, Young S.; Park, Jae H.; Kim, Sung Y.

2007-01-01

Injury to liver, resulting in loss of its normal physiological/biochemical functions, may adversely affect a secondary organ. We examined the response of the liver and kidney to chemical substances that require metabolic activation for their toxicities in mice with a preceding liver injury. Carbon tetrachloride treatment 24 h prior to a challenging dose of carbon tetrachloride or acetaminophen decreased the resulting hepatotoxicity both in male and female mice as determined by histopathological examination and increases in serum enzyme activities. In contrast, the renal toxicity of the challenging toxicants was elevated markedly in male, but not in female mice. Partial hepatectomy also induced similar changes in the hepatotoxicity and nephrotoxicity of a challenging toxicant, suggesting that the contrasting response of male liver and kidney was associated with the reduction of the hepatic metabolizing capacity. Carbon tetrachloride pretreatment or partial hepatectomy decreased the hepatic xenobiotic-metabolizing enzyme activities in both sexes but elevated the renal p-nitrophenol hydroxylase, p-nitroanisole O-demethylase and aminopyrine N-demethylase activities significantly only in male mice. Increases in Cyp2e1 and Cyp2b expression were also evident in male kidney. Castration of males or testosterone administration to females diminished the sex-related differences in the renal response to an acute liver injury. The results indicate that reduction of the hepatic metabolizing capacity induced by liver injury may render secondary target organs susceptible to chemical substances activated in these organs. This effect may be sex-specific. It is also suggested that an integrated approach should be taken for proper assessment of chemical hazards

Males collectively defend their one-male units against bachelor males in a multi-level primate society.

Science.gov (United States)

Xiang, Zuo-Fu; Yang, Bang-He; Yu, Yang; Yao, Hui; Grueter, Cyril C; Garber, Paul A; Li, Ming

2014-07-01

Group-level male-male co-operation, which has been documented in several primate and non-primate societies, may be mutualistically advantageous to the participants when confronted with threats such as takeovers and cuckoldry by external males. Co-operation among members of distinct social units-while universal among humans-is extremely rare in non-human primates. We present the first observations of collective action or co-operation among males of different one-male units (OMU) in a multi-level society of Rhinopithecus roxellana. A total of 59 instances of male co-operation were recorded. Male co-operation included coordinated chasing, joint vigilance, and patrolling behavior directed at lone adult males trying to enter an OMU. Male co-operation was significantly more frequent during the mating season when the risk of incursions and extra-group paternity was higher. Paternity of infants born in the subsequent birth season and kin relationships among resident males were identified using microsatellite genotype. All infants were sired by OMU males, which we interpret as possible evidence for their success at thwarting mating attempts by satellite males. OMU males were principally unrelated suggesting that male co-operation is best understood in terms of the mutual direct benefits individuals obtain through collective action. Our findings lend support to the bachelor threat hypothesis in which the cooperative behavior of several individuals is more effective than the lone action of a single individual in providing mate defense. Our research has implications for understanding male bonding, higher-level collective action, and the evolution of social co-operation in human societies. © 2013 Wiley Periodicals, Inc.

Curved reconstructions versus three-dimensional surface rendering in the demonstration of cortical lesions in patients with extratemporal epilepsy

NARCIS (Netherlands)

Meiners, LC; Scheffers, JM; De Kort, GAP; Burger, H; Van Huffelen, AC; Van Rijen, PC; Van Veelen, CWM

RATIONALE AND OBJECTIVES. TO compare the visibility and localization of extratemporal cortical lesions in extratemporal epilepsy by using curved reconstruction (CR) and three-dimensional surface rendering (3D SR) of 3D-acquired MR images and to study the degree of confidence with which localizations

MRI of the labyrinth with volume rendering for cochlear implants candidates

International Nuclear Information System (INIS)

Sakata, Motomichi; Harada, Kuniaki; Shirase, Ryuji; Suzuki, Junpei; Nagahama, Hiroshi

2009-01-01

We demonstrated three-dimensional models of the labyrinth by volume rendering (VR) in preoperative assessment for cochlear implantation. MRI data sets were acquired in selected subjects using three-dimensional-fast spin echo sequences (3D-FSE). We produced the three-dimensional models of the labyrinth from axial heavily T2-weighted images. The three-dimensional models distinguished the scala tympani and scala vestibuli and provided multidirectional images. The optimal threshold three-dimensional models clearly showed the focal region of signal loss in the cochlear turns (47.1%) and the presence of inner ear anomalies (17.3%) in our series of patients. This study was concluded that these three-dimensional models by VR provide the oto-surgeon with precise, detailed, and easily interpreted information about the cochlear turns for cochlear implants candidates. (author)

Odour-mediated foraging by yellowjacket wasps (Hymenoptera: Vespidae): predation on leks of pheromone-calling Mediterranean fruit fly males (Diptera: Tephritidae).

Science.gov (United States)

Hendrichs, J; Katsoyannos, B I; Wornoayporn, V; Hendrichs, M A

1994-09-01

Predation is probably the most important male mortality factor in insect species with courtship displays that render males performing them conspicuous targets of predators. Sexually active Mediterranean fruit fly males, Ceratitis capitata (Wied.), aggregate in leks, where they participate in agonistic encounters and engage in visual, acoustic and pheromone-calling displays to attract receptive females. The objective of this study was to assess: a) whether sexually displaying C. capitata males in leks inside host and non-host foliage are subject to predation by the most prominent predators yellow-jacket wasps, Vespula germanica (F.), and if so, b) whether olfactory, visual or auditive stimuli are used by foraging wasps in locating male C. capitata prey. Studies were carried out in a citrus orchard and surroundings on the island of Chios, Greece. Observations were conducted using perforated containers hung within mulberry, fig or citrus foliage. Living C. capitata flies of different sex and either mature or immature were placed inside. Our results show that the yellowjacket wasps have learned to associate the presence of sexually active medfly males aggregated in leks with their prey's pheromone (kairomone). Foraging wasps, flying through the crowns of host trees, responded to the odour source of C. capitata male pheromone by approaching from downwind. Even inside dense citrus tree foliage, wasps keyed in on aggregations of pheromone-calling males using olfactory stimuli. Stimuli of visual and acoustic male signalling were only used at close range, after having followed the pheromone plume close to its source. Visual cues played a greater role in directing wasp foraging under more open and exposed host foliage conditions. Odour-based foraging of wasps inside host foliage in the mid-morning hours, when medfly male lekking activities peak, shifted gradually to a more visual-based host fruit patrolling in the afternoons to capture ovipositing and feeding medfly females

Development of a virtual speaking simulator using Image Based Rendering.

Science.gov (United States)

Lee, J M; Kim, H; Oh, M J; Ku, J H; Jang, D P; Kim, I Y; Kim, S I

2002-01-01

The fear of speaking is often cited as the world's most common social phobia. The rapid growth of computer technology has enabled the use of virtual reality (VR) for the treatment of the fear of public speaking. There are two techniques for building virtual environments for the treatment of this fear: a model-based and a movie-based method. Both methods have the weakness that they are unrealistic and not controllable individually. To understand these disadvantages, this paper presents a virtual environment produced with Image Based Rendering (IBR) and a chroma-key simultaneously. IBR enables the creation of realistic virtual environments where the images are stitched panoramically with the photos taken from a digital camera. And the use of chroma-keys puts virtual audience members under individual control in the environment. In addition, real time capture technique is used in constructing the virtual environments enabling spoken interaction between the subject and a therapist or another subject.

高显色指数LED合成白光光源的研究%Study on LEDs Synthesized High Color Rendering Index White Light Source

Institute of Scientific and Technical Information of China (English)

胡奕彬; 庄其仁; 刘士伟; 赖传杜

2016-01-01

针对目前白光发光二极管(LED)照明灯具显色性不高的问题,基于测色法研究了LED合成白光显色指数的计算模型,根据参与合成的LED光源光谱及其数量,软件编程计算得出合成光源的色温、显色指数等参数.采用优化的遍历范围,将实验测量得到的冷、暖白光及单色LED的光谱导入程序进行模拟计算,得到不同色温下合成光源的显色指数最大值以及所对应的各种LED配比数量.结果表明,暖白光LED与红、绿、蓝LED合成可以获得色温L介于3500 K～12300 K、显色指数见介于92.0～97.7的白光;与红、绿、青LED合成可以获得Ra介于95.0～97.8的低色温白光(3500 K～4500 K).冷白光LED与红、绿、青LED合成可以获得Ra介于90.9～98.4的高色温白光(8200 K～13000 K).对理论计算的Tc=7803 K、Ra=97.29的LED配比进行实际制作,实验测量得到Tc=7992 K,Ra=97.1,理论计算结果与实验结果吻合.%Targeting poor color rendering property of current white light-emitting diode (LED) lamps,based on the colorimetry method,the calculation model for color rendering index of synthetic white light is studied and the parameters like color temperature and color rendering index of the synthetic LED light source are obtained based on the spectrum and quantity of light sources involved in the synthesis process.By using optimized traversal range,the spectra of cold and warm white light and single-color LEDs are imported into the program for simulating calculation,obtaining the maximum value of color rendering index of the synthesized light source under different color temperatures as well as corresponding matched quantity of various LEDs.The results show that the synthesis with warm white LEDs and red,green and blue LEDs can lead to white light whose color temperature falls in the range of 3500 K～12300 K and color rendering index Ra ranges between 92.0 and 97.7.The synthesis with warm white LEDs and red,green and bluish

Estradiol-induced neurogenesis in the female accessory olfactory bulb is required for the learning of the male odor.

Science.gov (United States)

Brus, Maïna; Trouillet, Anne-Charlotte; Hellier, Vincent; Bakker, Julie

2016-08-01

Odors processed by the main and accessory olfactory bulbs (MOB, AOB) are important for sexual behavior. Interestingly, both structures continue to receive new neurons during adulthood. A role for olfactory neurogenesis in sexual behavior in female mice has recently been shown and gonadal hormones such as estradiol can modulate adult neurogenesis. Therefore, we wanted to determine the role of estradiol in learning the odors of sexual partners and in the adult neurogenesis of female aromatase knockout mice (ArKO), unable to produce estradiol. Female wild-type (WT) and ArKO mice were exposed to male odors during 7 days, and olfactory preferences, cell proliferation, cell survival and functional involvement of newborn neurons were analyzed, using BrdU injections, in combination with a marker of cell activation (Zif268) and neuronal fate (doublecortin, NeuN). Behavioral tasks indicated that both WT and ArKO females were able to discriminate between the odors of two different males, but ArKO mice failed to learn the familiar male odor. Proliferation of newborn cells was reduced in ArKO mice only in the dentate gyrus of the hippocampus. Olfactory exposure decreased cell survival in the AOB in WT females, suggesting a role for estradiol in a structure involved in sexual behavior. Finally, newborn neurons do not seem to be functionally involved in the AOB of ArKO mice compared with WT, when females were exposed to the odor of a familiar male, suggesting that estradiol-induced neurogenesis in the AOB is required for the learning of the male odor in female mice. Aromatase knockout mice (ArKO) presented deficits in olfactory preferences without affecting their olfactory discrimination abilities, and showed no functional involvement of newborn neurons in the accessory olfactory bulb (AOB) in response to the odor of a familiar male. These results suggest that estradiol-induced neurogenesis in the female AOB is required for the learning of the male odor. © 2016 International

Use of multidetector row CT with volume renderings in right lobe living liver transplantation

International Nuclear Information System (INIS)

Ishifuro, Minoru; Akiyama, Yuji; Kushima, Toshio; Horiguchi, Jun; Nakashige, Aya; Tamura, Akihisa; Marukawa, Kazushi; Fukuda, Hiroshi; Ono, Chiaki; Ito, Katsuhide

2002-01-01

Multidetector row CT is a feasible diagnostic tool in pre- and postoperative liver partial transplantation. We can assess vascular anatomy and liver parenchyma as well as volumetry, which provide useful information for both donor selection and surgical planning. Disorders of the vascular and biliary systems are carefully observed in recipients. In addition, we evaluate liver regeneration of both the donor and the recipient by serial volumetry. We present how multidetector row CT with state-of-the-art three-dimensional volume renderings may be used in right lobe liver transplantation. (orig.)

Humphrey Davy and the Safety Lamp: The Use of Metal Gauze as a Flame Barrier

Science.gov (United States)

Mills, Allan

2015-01-01

The "safety lamp" invented by Humphrey Davy in 1815 utilised the cooling effect of metal gauze to prevent the flame of a candle or oil lamp (essential for illumination in mines) from passing through such a screen. It is therefore rendered unable to ignite any potentially explosive mixture of air and methane in the atmosphere surrounding…

Screen-Space Normal Distribution Function Caching for Consistent Multi-Resolution Rendering of Large Particle Data

KAUST Repository

Ibrahim, Mohamed

2017-08-28

Molecular dynamics (MD) simulations are crucial to investigating important processes in physics and thermodynamics. The simulated atoms are usually visualized as hard spheres with Phong shading, where individual particles and their local density can be perceived well in close-up views. However, for large-scale simulations with 10 million particles or more, the visualization of large fields-of-view usually suffers from strong aliasing artifacts, because the mismatch between data size and output resolution leads to severe under-sampling of the geometry. Excessive super-sampling can alleviate this problem, but is prohibitively expensive. This paper presents a novel visualization method for large-scale particle data that addresses aliasing while enabling interactive high-quality rendering. We introduce the novel concept of screen-space normal distribution functions (S-NDFs) for particle data. S-NDFs represent the distribution of surface normals that map to a given pixel in screen space, which enables high-quality re-lighting without re-rendering particles. In order to facilitate interactive zooming, we cache S-NDFs in a screen-space mipmap (S-MIP). Together, these two concepts enable interactive, scale-consistent re-lighting and shading changes, as well as zooming, without having to re-sample the particle data. We show how our method facilitates the interactive exploration of real-world large-scale MD simulation data in different scenarios.

Screen-Space Normal Distribution Function Caching for Consistent Multi-Resolution Rendering of Large Particle Data

KAUST Repository

Ibrahim, Mohamed; Wickenhauser, Patrick; Rautek, Peter; Reina, Guido; Hadwiger, Markus

2017-01-01

Molecular dynamics (MD) simulations are crucial to investigating important processes in physics and thermodynamics. The simulated atoms are usually visualized as hard spheres with Phong shading, where individual particles and their local density can be perceived well in close-up views. However, for large-scale simulations with 10 million particles or more, the visualization of large fields-of-view usually suffers from strong aliasing artifacts, because the mismatch between data size and output resolution leads to severe under-sampling of the geometry. Excessive super-sampling can alleviate this problem, but is prohibitively expensive. This paper presents a novel visualization method for large-scale particle data that addresses aliasing while enabling interactive high-quality rendering. We introduce the novel concept of screen-space normal distribution functions (S-NDFs) for particle data. S-NDFs represent the distribution of surface normals that map to a given pixel in screen space, which enables high-quality re-lighting without re-rendering particles. In order to facilitate interactive zooming, we cache S-NDFs in a screen-space mipmap (S-MIP). Together, these two concepts enable interactive, scale-consistent re-lighting and shading changes, as well as zooming, without having to re-sample the particle data. We show how our method facilitates the interactive exploration of real-world large-scale MD simulation data in different scenarios.

Ethylene signaling renders the jasmonate response of Arabidopsis insensitive to future suppression by salicylic Acid.

Science.gov (United States)

Leon-Reyes, Antonio; Du, Yujuan; Koornneef, Annemart; Proietti, Silvia; Körbes, Ana P; Memelink, Johan; Pieterse, Corné M J; Ritsema, Tita

2010-02-01

Cross-talk between jasmonate (JA), ethylene (ET), and Salicylic acid (SA) signaling is thought to operate as a mechanism to fine-tune induced defenses that are activated in response to multiple attackers. Here, 43 Arabidopsis genotypes impaired in hormone signaling or defense-related processes were screened for their ability to express SA-mediated suppression of JA-responsive gene expression. Mutant cev1, which displays constitutive expression of JA and ET responses, appeared to be insensitive to SA-mediated suppression of the JA-responsive marker genes PDF1.2 and VSP2. Accordingly, strong activation of JA and ET responses by the necrotrophic pathogens Botrytis cinerea and Alternaria brassicicola prior to SA treatment counteracted the ability of SA to suppress the JA response. Pharmacological assays, mutant analysis, and studies with the ET-signaling inhibitor 1-methylcyclopropene revealed that ET signaling renders the JA response insensitive to subsequent suppression by SA. The APETALA2/ETHYLENE RESPONSE FACTOR transcription factor ORA59, which regulates JA/ET-responsive genes such as PDF1.2, emerged as a potential mediator in this process. Collectively, our results point to a model in which simultaneous induction of the JA and ET pathway renders the plant insensitive to future SA-mediated suppression of JA-dependent defenses, which may prioritize the JA/ET pathway over the SA pathway during multi-attacker interactions.

Screen Space Ambient Occlusion Based Multiple Importance Sampling for Real-Time Rendering

Science.gov (United States)

Zerari, Abd El Mouméne; Babahenini, Mohamed Chaouki

2018-03-01

We propose a new approximation technique for accelerating the Global Illumination algorithm for real-time rendering. The proposed approach is based on the Screen-Space Ambient Occlusion (SSAO) method, which approximates the global illumination for large, fully dynamic scenes at interactive frame rates. Current algorithms that are based on the SSAO method suffer from difficulties due to the large number of samples that are required. In this paper, we propose an improvement to the SSAO technique by integrating it with a Multiple Importance Sampling technique that combines a stratified sampling method with an importance sampling method, with the objective of reducing the number of samples. Experimental evaluation demonstrates that our technique can produce high-quality images in real time and is significantly faster than traditional techniques.

The role of male violence against women in female under-representation in (geo)sciences

Science.gov (United States)

Vincent, Aude

2017-04-01

Many women face male violence, simply because they are women. Street harassment, sexual harassment at the workplace, sexual assaults and rapes in public or private spaces, domestic violence, are rampant issues. About 1 on 5 women in Europe experiences at least once in her lifetime rape or physical violence, most of the time from a partner or former partner. In average, each year in France, 120 women are killed by their partner. Women scientists are women. There is no reason to suppose that they are less victims of male violence than other women. The different forms of violence they can encounter have effects on women, on physical, behavioral, and psychological levels. Those effects can obviously affect women in their professional life as well as in their intimate or social life: - they might want to avoid the perpetrator of the violence they were victim of; - their self-esteem might be crushed by the disparagement suffered from a violent partner; - a violent partner might threaten to get even more violent if they continue their studies or their career; - the psychological effects of a rape might leave them unable to continue their life as before. Because of such impacts on their lives, some women can't carry on their work and career as they could have, or they might even quit them, or never finish their Master or their PhD. The fact that gender stereotyping from an early ages leads more men than women to scientific careers is now quite acknowledge. We should also think about how much of the under-representation of women in geosciences, and sciences in general, is due to the impact of male violence on women lives.

In situ peeling tests for assessing the cohesion and consolidation characteristic of historic plaster and render surfaces

Czech Academy of Sciences Publication Activity Database

Drdácký, Miloš; Slížková, Zuzana

2015-01-01

Roč. 60, č. 2 (2015), s. 121-130 ISSN 0039-3630 R&D Projects: GA MŠk(CZ) ED1.1.00/02.0060; GA ČR(CZ) GA103/09/2067 Institutional support: RVO:68378297 Keywords : peeling test * historic render * surface consolidation * cohesion * non-destructive testing Subject RIV: AL - Art, Architecture, Cultural Heritage Impact factor: 0.323, year: 2015

CONTENTMENT OF PATIENTS TOWARDS THE SERVICES RENDERED IN THE HEALTH CARE SECTOR – A CASE STUDY

OpenAIRE

G. D. V. Kusuma

2017-01-01

In India hospital industry is growing at a very faster rate. Diseases are increasing in a rapid manner due to because of negligence of the people i.e. improper diet, no physical work, junk foods etc., and leads to spoil the health of the people. In this connection people are visiting the hospitals frequently. The crowds in the hospitals are increasing, but some of the hospitals are unable to provide proper facilities to the visitors of their hospitals. That is why the researcher has chosen th...

Virtual endoscopy and 3D volume rendering in the management of frontal sinus fractures.

Science.gov (United States)

Belina, Stanko; Cuk, Viseslav; Klapan, Ivica

2009-12-01

Frontal sinus fractures (FSF) are commonly caused by traffic accidents, assaults, industrial accidents and gunshot wounds. Classical roentgenography has high proportion of false negative findings in cases of FSF and is not particularly useful in examining the severity of damage to the frontal sinus posterior table and the nasofrontal duct region. High resolution computed tomography was inavoidable during the management of such patients but it may produce large quantity of 2D images. Postprocessing of datasets acquired by high resolution computer tomography from patients with severe head trauma may offer a valuable additional help in diagnostics and surgery planning. We performed virtual endoscopy (VE) and 3D volume rendering (3DVR) on high resolution CT data acquired from a 54-year-old man with with both anterior and posterior frontal sinus wall fracture in order to demonstrate advantages and disadvantages of these methods. Data acquisition was done by Siemens Somatom Emotion scanner and postprocessing was performed with Syngo 2006G software. VE and 3DVR were performed in a man who suffered blunt trauma to his forehead and nose in an traffic accident. Left frontal sinus anterior wall fracture without dislocation and fracture of tabula interna with dislocation were found. 3D position and orientation of fracture lines were shown in by 3D rendering software. We concluded that VE and 3DVR can clearly display the anatomic structure of the paranasal sinuses and nasopharyngeal cavity, revealing damage to the sinus wall caused by a fracture and its relationship to surrounding anatomical structures.

3D-shaded surface rendering of gadolinium-enhanced MR angiography in congenital heart disease

International Nuclear Information System (INIS)

Okuda, S.; Kikinis, R.; Dumanli, H.; Geva, T.; Powell, A.J.; Chung, T.

2000-01-01

Background. Gadolinium-enhanced three-dimensional (3D) MR angiography is a useful imaging technique for patients with congenital heart disease. Objective. This study sought to determine the added value of creating 3D shaded surface displays compared to standard maximal intensity projection (MIP) and multiplanar reformatting (MPR) techniques when analyzing 3D MR angiography data. Materials and methods. Seventeen patients (range, 3 months to 51 years old) with a variety of congenital cardiovascular defects underwent gadolinium-enhanced 3D MR angiography of the thorax. Color-coded 3D shaded surface models were rendered from the image data using manual segmentation and computer-based algorithms. Models could be rotated, translocated, or zoomed interactively by the viewer. Information available from the 3D models was compared to analysis based on viewing standard MIP/MPR displays. Results. Median postprocessing time for the 3D models was 6 h (range, 3-25 h) compared to approximately 20 min for MIP/MPR viewing. No additional diagnostic information was gained from 3D model analysis. All major findings with MIP/MPR postprocessing were also apparent on the 3D models. Qualitatively, the 3D models were more easily interpreted and enabled adjacent vessels to be distinguished more readily. Conclusion. Routine use of 3D shaded surface reconstructions for visualization of contrast enhanced MR angiography in congenital heart disease cannot be recommended. 3D surface rendering may be more useful for presenting complex anatomy to an audience unfamiliar with congenital heart disease and as an educational tool. (orig.)

Detection of pesticides and dioxins in tissue fats and rendering oils using laser-induced breakdown spectroscopy (LIBS).

Science.gov (United States)

Multari, Rosalie A; Cremers, David A; Scott, Thomas; Kendrick, Peter

2013-03-13

In laser-induced breakdown spectroscopy (LIBS), a series of powerful laser pulses are directed at a surface to form microplasmas from which light is collected and spectrally analyzed to identify the surface material. In most cases, no sample preparation is needed, and results can be automated and made available within seconds to minutes. Advances in LIBS spectral data analysis using multivariate regression techniques have led to the ability to detect organic chemicals in complex matrices such as foods. Here, the use of LIBS to differentiate samples contaminated with aldrin, 1,2,3,4,6,7,8-heptachlorodibenzo-p-dioxin, chlorpyrifos, and dieldrin in the complex matrices of tissue fats and rendering oils is described. The pesticide concentrations in the samples ranged from 0.005 to 0.1 μg/g. All samples were successfully differentiated from each other and from control samples. Sample concentrations could also be differentiated for all of the pesticides and the dioxin included in this study. The results presented here provide first proof-of-principle data for the ability to create LIBS-based instrumentation for the rapid analysis of pesticide and dioxin contamination in tissue fat and rendered oils.

Three dimensional volume rendering virtual endoscopy of the ossicles using a multi-row detector CT: applications and limitations

International Nuclear Information System (INIS)

Kim, Su Yeon; Choi, Sun Seob; Kang, Myung Jin; Shin, Tae Beom; Lee, Ki Nam; Kang, Myung Koo

2005-01-01

This study was conducted to know the applications and limitations of three dimensional volume rendering virtual endoscopy of the ossicles using a multi-row detector CT. This study examined 25 patients who underwent temporal bone CT using a 16-row detector CT as a result of hearing problems or trauma. The axial CT scan of the temporal bone was performed with a 0.6 mm collimation, and a reconstruction was carried out with a U70u sharp of kernel value, a 1 mm thickness and 0.5-1.0 mm increments. After observing the ossicles in the axial and coronal images, virtual endoscopy was performed using a three dimensional volume rendering technique with a threshold value of-500 HU. The intra-operative otoendoscopy was performed in 12 ears, and was compared with the virtual endoscopy findings. Virtual endoscopy of the 29 ears without hearing problems demonstrated hypoplastic or an incomplete depiction of the stapes superstructures in 25 ears and a normal depiction in 4 ears. Virtual endoscopy of 21 ears with hearing problems demonstrated no ossicles in 1 ears, no malleus in 3 ears, a malleoincudal subluxation in 6 ears, a dysplastic incus in 5 ears, an incudostapedial subluxation in 9 ears, dysplastic stapes in 2 ears, a hypoplastic or incomplete depiction of the stapes in 16 ears and no stapes in 1 ears. In contrast to the intra-operative otoendoscopy, 8 out of 12 ears showed a hypoplastic or deformed stapes in the virtual endoscopy. Volume rendering virtual endoscopy using a multi-row detector CT is an excellent method for evaluation the ossicles in three dimension, even thought the partial volume effect for the stapes superstructures needs to be considered

Telling Friend from Foe: Listeners Are Unable to Identify In-Group and Out-Group Members from Heard Laughter

Directory of Open Access Journals (Sweden)

Marie Ritter

2017-11-01

Full Text Available Group membership is important for how we perceive others, but although perceivers can accurately infer group membership from facial expressions and spoken language, it is not clear whether listeners can identify in- and out-group members from non-verbal vocalizations. In the current study, we examined perceivers' ability to identify group membership from non-verbal vocalizations of laughter, testing the following predictions: (1 listeners can distinguish between laughter from different nationalities and (2 between laughter from their in-group, a close out-group, and a distant out-group, and (3 greater exposure to laughter from members of other cultural groups is associated with better performance. Listeners (n = 814 took part in an online forced-choice classification task in which they were asked to judge the origin of 24 laughter segments. The responses were analyzed using frequentist and Bayesian statistical analyses. Both kinds of analyses showed that listeners were unable to accurately identify group identity from laughter. Furthermore, exposure did not affect performance. These results provide a strong and clear demonstration that group identity cannot be inferred from laughter.

Telling Friend from Foe: Listeners Are Unable to Identify In-Group and Out-Group Members from Heard Laughter.

Science.gov (United States)

Ritter, Marie; Sauter, Disa A

2017-01-01

Group membership is important for how we perceive others, but although perceivers can accurately infer group membership from facial expressions and spoken language, it is not clear whether listeners can identify in- and out-group members from non-verbal vocalizations. In the current study, we examined perceivers' ability to identify group membership from non-verbal vocalizations of laughter, testing the following predictions: (1) listeners can distinguish between laughter from different nationalities and (2) between laughter from their in-group, a close out-group, and a distant out-group, and (3) greater exposure to laughter from members of other cultural groups is associated with better performance. Listeners ( n = 814) took part in an online forced-choice classification task in which they were asked to judge the origin of 24 laughter segments. The responses were analyzed using frequentist and Bayesian statistical analyses. Both kinds of analyses showed that listeners were unable to accurately identify group identity from laughter. Furthermore, exposure did not affect performance. These results provide a strong and clear demonstration that group identity cannot be inferred from laughter.

Semiconductive 3-D haloplumbate framework hybrids with high color rendering index white-light emission.

Science.gov (United States)

Wang, Guan-E; Xu, Gang; Wang, Ming-Sheng; Cai, Li-Zhen; Li, Wen-Hua; Guo, Guo-Cong

2015-12-01

Single-component white light materials may create great opportunities for novel conventional lighting applications and display systems; however, their reported color rendering index (CRI) values, one of the key parameters for lighting, are less than 90, which does not satisfy the demand of color-critical upmarket applications, such as photography, cinematography, and art galleries. In this work, two semiconductive chloroplumbate (chloride anion of lead(ii)) hybrids, obtained using a new inorganic-organic hybrid strategy, show unprecedented 3-D inorganic framework structures and white-light-emitting properties with high CRI values around 90, one of which shows the highest value to date.

A screen for F1 hybrid male rescue reveals no major-effect hybrid lethality loci in the Drosophila melanogaster autosomal genome.

Science.gov (United States)

Cuykendall, Tawny N; Satyaki, P; Ji, Shuqing; Clay, Derek M; Edelman, Nathaniel B; Kimchy, Alexandra; Li, Ling-Hei; Nuzzo, Erin A; Parekh, Neil; Park, Suna; Barbash, Daniel A

2014-10-27

Hybrid sons between Drosophila melanogaster females and D. simulans males die as 3rd instar larvae. Two genes, D. melanogaster Hybrid male rescue (Hmr) on the X chromosome, and D. simulans Lethal hybrid rescue (Lhr) on chromosome II, interact to cause this lethality. Loss-of-function mutations in either gene suppress lethality, but several pieces of evidence suggest that additional factors are required for hybrid lethality. Here we screen the D. melanogaster autosomal genome by using the Bloomington Stock Center Deficiency kit to search for additional regions that can rescue hybrid male lethality. Our screen is designed to identify putative hybrid incompatibility (HI) genes similar to Hmr and Lhr which, when removed, are dominant suppressors of lethality. After screening 89% of the autosomal genome, we found no regions that rescue males to the adult stage. We did, however, identify several regions that rescue up to 13% of males to the pharate adult stage. This weak rescue suggests the presence of multiple minor-effect HI loci, but we were unable to map these loci to high resolution, presumably because weak rescue can be masked by genetic background effects. We attempted to test one candidate, the dosage compensation gene male specific lethal-3 (msl-3), by using RNA interference with short hairpin microRNA constructs targeted specifically against D. simulans msl-3 but failed to achieve knockdown, in part due to off-target effects. We conclude that the D. melanogaster autosomal genome likely does not contain additional major-effect HI loci. We also show that Hmr is insufficient to fully account for the lethality associated with the D. melanogaster X chromosome, suggesting that additional X-linked genes contribute to hybrid lethality. Copyright © 2014 Cuykendall et al.

Both male and female identity influence variation in male signalling effort

Directory of Open Access Journals (Sweden)

Svensson P Andreas

2011-08-01

Full Text Available Abstract Background Male sexual displays play an important role in sexual selection by affecting reproductive success. However, for such displays to be useful for female mate choice, courtship should vary more among than within individual males. In this regard, a potentially important source of within male variation is adjustment of male courtship effort in response to female traits. Accordingly, we set out to dissect sources of variation in male courtship effort in a fish, the desert goby (Chlamydogobius eremius. We did so by designing an experiment that allowed simultaneous estimation of within and between male variation in courtship, while also assessing the importance of the males and females as sources of courtship variation. Results Although males adjusted their courtship depending on the identity of the female (a potentially important source of within-male variation, among-male differences were considerably greater. In addition, male courtship effort towards a pair of females was highly repeatable over a short time frame. Conclusion Despite the plasticity in male courtship effort, courtship displays had the potential to reliably convey information about the male to mate-searching females. Our experiment therefore underscores the importance of addressing the different sources contributing to variation in the expression of sexually-selected traits.

Chemical composition of scent-gland secretions in an old world monkey (Mandrillus sphinx): influence of sex, male status, and individual identity.

Science.gov (United States)

Setchell, Joanna M; Vaglio, Stefano; Moggi-Cecchi, Jacopo; Boscaro, Francesca; Calamai, Luca; Knapp, Leslie A

2010-03-01

Primates are traditionally considered to be microsmatic, with decreased reliance on olfactory senses in comparison to other sensory modalities such as vision. This is particularly the case for Old World monkeys and apes (catarrhines). However, various lines of evidence suggest that chemical communication may be important in these species, including the presence of a sternal scent-gland in the mandrill. We investigated the volatile components of mandrill odor using gas chromatography-mass spectrometry. We identified a total of 97 volatile components in 88 swabs of the sternal gland secretion and 95 samples of sternal gland hair saturated with scent-gland secretion collected from 27 males and 18 females. We compared odor profiles with features of the signaler using principle components and discriminant function analyses and found that volatile profiles convey both variable (age, dominance rank in males) and fixed (sex, possibly individual identity) information about the signaler. The combination of an odor profile that signals sex, age, and rank with increased motivation to scent-mark and increased production of secretion in high-ranking males leads to a potent signal of the presence of a dominant, adult male with high testosterone levels. This may be particularly relevant in the dense Central African rain forest which mandrills inhabit. By contrast, we were unable to differentiate between either female cycle stage or female rank based on odor profiles, which accords with behavioral studies suggesting that odor signals are not as important in female mandrills as they are in males. The similarity of our findings to those for other mammals and in primates that are more distantly related to humans suggests a broader role for odor in primate communication than is currently recognized.

Male density affects large-male advantage in the golden silk spider, Nephila clavipes

OpenAIRE

Clare C. Rittschof

2010-01-01

Across a variety of animal taxa, the outcome of male--male contests depends on male body size; winners are usually the larger males or the males with bigger weapons. However, high male density can either increase or reverse large-male advantage because density changes the frequency and intensity of male--male interactions. In the golden orb-web spider Nephila clavipes, large males have a competitive advantage in male--male contests. However, this species shows more than 2-fold variation in ma...

Rendering Systems Visible for Design: Synthesis Maps as Constructivist Design Narratives

Directory of Open Access Journals (Sweden)

Peter Jones

Full Text Available Synthesis maps integrate research evidence, system expertise, and design proposals into visual narratives. These narratives support communication and decision-making among stakeholders. Synthesis maps evolved from earlier visualization tools in systemics and design. They help stakeholders to understand design options for complex sociotechnical systems. Other visual approaches map complexity for effective collaboration across perspectives and knowledge domains. These help stakeholder groups to work in higher-order design contexts for sociotechnical or human-ecological systems. This article describes a constructivist pedagogy for collaborative learning in small teams of mixed-discipline designers. Synthesis mapping enables these teams to learn systems methods for design research in complex problem domains. Synthesis maps integrate knowledge from research cycles and iterative sensemaking to define a coherent design narrative. While synthesis maps may include formal system modeling techniques, they do not require them. Synthesis maps tangibly render research observations and design choices. As a hybrid system design method, synthesis maps are a contribution to the design genre of visual systems thinking.

Can thiolation render a low molecular weight polymer of just 20-kDa mucoadhesive?

Science.gov (United States)

Mahmood, Arshad; Bonengel, Sonja; Laffleur, Flavia; Ijaz, Muhammad; Idrees, Muneeb Ahmad; Hussain, Shah; Huck, Christian W; Matuszczak, Barbara; Bernkop-Schnürch, Andreas

2016-01-01

The objective was to investigate whether even low-molecular weight polymers (LMWPs) can be rendered mucoadhesive due to thiolation. Interceded by the double catalytic system carbodiimide/N-hydroxysuccinimide, cysteamine was covalently attached to a copolymer, poly(4-styrenesulfonic acid-co-maleic acid) (PSSA-MA) exhibiting a molecular weight of just 20 kDa. Depending on the amount of added N-hydroxysuccinimide and cysteamine, the resulting PSSA-MA-cysteamine (PC) conjugates exhibited increasing degree of thiolation, highest being "PC 2300" exhibiting 2300.16 ± 149.86 μmol thiol groups per gram of polymer (mean ± SD; n = 3). This newly developed thiolated polymer was evaluated regarding mucoadhesive, rheological and drug release properties as well from the toxicological point of view. Swelling behavior in 100 mM phosphate buffer pH 6.8 was improved up to 180-fold. Furthermore, due to thiolation, the mucoadhesive properties of the polymer were 240-fold improved. Rheological measurements of polymer/mucus mixtures confirmed results obtained by mucoadhesion studies. In comparison to unmodified polymer, PC 2300 showed 2.3-, 2.3- and 2.4-fold increase in dynamic viscosity, elastic modulus and viscous modulus, respectively. Sustained release of the model drug codeine HCl out of the thiomer was provided for 2.5 h (p polymer. Moreover, the thiomer was found non-toxic over Caco-2 cells for a period of 6- and 24-h exposure. Findings of the present study provide evidence that due to thiolation LMWPs can be rendered highly mucoadhesive as well as cohesive and that a controlled drug release out of such polymers can be provided.

MS26/CYP704B is required for anther and pollen wall development in bread wheat (Triticum aestivum L. and combining mutations in all three homeologs causes male sterility.

Directory of Open Access Journals (Sweden)

Manjit Singh

Full Text Available Development of anthers and pollen represents an important aspect of the life cycle in flowering plants. Genes contributing to anther and pollen development have been widely studied in many plant species. Ms26/CYP704B genes play an important role in pollen development through biosynthesis of sporopollenin for pollen exine formation. To investigate the role of Ms26/CYP704B genes in anther and pollen development of bread wheat, mutations in the A-, B-, and D-homeologs of the putative Ms26/CYP704B gene were analyzed. Single and double homozygous mutants in any of the homeologs did not affect pollen development and male fertility. Triple homozygous mutants resulted in completely male sterile plants that were defective in pollen and anther development. Additionally, double homozygous-single heterozygous mutants were also male sterile although with varying levels of residual fertility. The fertility of these triple mutants was dependent upon the homeolog contributing the wild-type allele. Two heterologous Ms26/CYP704B genes, when transformed into a triple homozygous mutant background, completely restored male fertility, whereas a single gene was unable to restore fertility. Functional analysis of Ms26/CYP704B furthers the understanding of male fertility genes which can be utilized for the development of novel hybrid seed production systems in wheat.

Method for rendering harmless sulfur dioxide-carrying gases and sulfur-carrying waste water from pyrolysis of oil shale

Energy Technology Data Exchange (ETDEWEB)

Aspegren, O E.A.; Eklund, A J

1951-03-15

A method is described for rendering harmless sulfur dioxide-carrying gases, which are formed in processes for the manufacture of solid, liquid, or gaseous products by pyrolysis of oil shale, and thereby to extract valuable products, characterized in that the sulfur dioxide-carrying gases are washed with a solution or sludge obtained by leaching wholly or partly burned-out residues from the pyrolysis.

Male sexuality.

Science.gov (United States)

Ginsberg, Terrie B

2010-05-01

It should be recognized that sexuality in the aging male is of such import that a complete sexual history must be performed. By taking a complete sexual history, facts can be obtained that will allow for appropriate focus relating to a holistic evaluation and will enable us to dispel antiquated sexual myths pertaining to the aging male. If initiated by the history taker, questions concerning sexuality may be discussed more comfortably by the patient. Erectile dysfunction, male sexual response cycle, testosterone, sexually transmitted diseases, human immunodeficiency virus, long-term illness, along with religion and culture are explored in this article with the aim of improving one's knowledge base, self reflection, and awareness of the importance of male sexuality. A complete understanding and appreciation of the aging male's medical history, surgical history, social history, and emotional history as well as his sexual, cultural, and religious concepts will allow the health care provider to better analyze information, and to recommend and provide appropriate advice and treatment to the aging male patient. Copyright 2010 Elsevier Inc. All rights reserved.

Development of a novel recessive genetic male sterility system for hybrid seed production in maize and other cross-pollinating crops.

Science.gov (United States)

Wu, Yongzhong; Fox, Tim W; Trimnell, Mary R; Wang, Lijuan; Xu, Rui-Ji; Cigan, A Mark; Huffman, Gary A; Garnaat, Carl W; Hershey, Howard; Albertsen, Marc C

2016-03-01

We have developed a novel hybridization platform that utilizes nuclear male sterility to produce hybrids in maize and other cross-pollinating crops. A key component of this platform is a process termed Seed Production Technology (SPT). This process incorporates a transgenic SPT maintainer line capable of propagating nontransgenic nuclear male-sterile lines for use as female parents in hybrid production. The maize SPT maintainer line is a homozygous recessive male sterile transformed with a SPT construct containing (i) a complementary wild-type male fertility gene to restore fertility, (ii) an α-amylase gene to disrupt pollination and (iii) a seed colour marker gene. The sporophytic wild-type allele complements the recessive mutation, enabling the development of pollen grains, all of which carry the recessive allele but with only half carrying the SPT transgenes. Pollen grains with the SPT transgenes exhibit starch depletion resulting from expression of α-amylase and are unable to germinate. Pollen grains that do not carry the SPT transgenes are nontransgenic and are able to fertilize homozygous mutant plants, resulting in nontransgenic male-sterile progeny for use as female parents. Because transgenic SPT maintainer seeds express a red fluorescent protein, they can be detected and efficiently separated from seeds that do not contain the SPT transgenes by mechanical colour sorting. The SPT process has the potential to replace current approaches to pollen control in commercial maize hybrid seed production. It also has important applications for other cross-pollinating crops where it can unlock the potential for greater hybrid productivity through expanding the parental germplasm pool. © 2015 The Authors. Plant Biotechnology Journal published by Society for Experimental Biology and The Association of Applied Biologists and John Wiley & Sons Ltd.

A Virtual Reality System for PTCD Simulation Using Direct Visuo-Haptic Rendering of Partially Segmented Image Data.

Science.gov (United States)

Fortmeier, Dirk; Mastmeyer, Andre; Schröder, Julian; Handels, Heinz

2016-01-01

This study presents a new visuo-haptic virtual reality (VR) training and planning system for percutaneous transhepatic cholangio-drainage (PTCD) based on partially segmented virtual patient models. We only use partially segmented image data instead of a full segmentation and circumvent the necessity of surface or volume mesh models. Haptic interaction with the virtual patient during virtual palpation, ultrasound probing and needle insertion is provided. Furthermore, the VR simulator includes X-ray and ultrasound simulation for image-guided training. The visualization techniques are GPU-accelerated by implementation in Cuda and include real-time volume deformations computed on the grid of the image data. Computation on the image grid enables straightforward integration of the deformed image data into the visualization components. To provide shorter rendering times, the performance of the volume deformation algorithm is improved by a multigrid approach. To evaluate the VR training system, a user evaluation has been performed and deformation algorithms are analyzed in terms of convergence speed with respect to a fully converged solution. The user evaluation shows positive results with increased user confidence after a training session. It is shown that using partially segmented patient data and direct volume rendering is suitable for the simulation of needle insertion procedures such as PTCD.

Predicting the long-term durability of hemp–lime renders in inland and coastal areas using Mediterranean, Tropical and Semi-arid climatic simulations

International Nuclear Information System (INIS)

Arizzi, Anna; Viles, Heather; Martín-Sanchez, Inés; Cultrone, Giuseppe

2016-01-01

Hemp-based composites are eco-friendly building materials as they improve energy efficiency in buildings and entail low waste production and pollutant emissions during their manufacturing process. Nevertheless, the organic nature of hemp enhances the bio-receptivity of the material, with likely negative consequences for its long-term performance in the building. The main purpose of this study was to study the response at macro- and micro-scale of hemp–lime renders subjected to weathering simulations in an environmental cabinet (one year was condensed in twelve days), so as to predict their long-term durability in coastal and inland areas with Mediterranean, Tropical and Semi-arid climates, also in relation with the lime type used. The simulated climatic conditions caused almost unnoticeable mass, volume and colour changes in hemp–lime renders. No efflorescence or physical breakdown was detected in samples subjected to NaCl, because the salt mainly precipitates on the surface of samples and is washed away by the rain. Although there was no visible microbial colonisation, alkaliphilic fungi (mainly Penicillium and Aspergillus) and bacteria (mainly Bacillus and Micrococcus) were isolated in all samples. Microbial growth and diversification were higher under Tropical climate, due to heavier rainfall. The influence of the bacterial activity on the hardening of samples has also been discussed here and related with the formation and stabilisation of vaterite in hemp–lime mixes. This study has demonstrated that hemp–lime renders show good durability towards a wide range of environmental conditions and factors. However, it might be useful to take some specific preventive and maintenance measures to reduce the bio-receptivity of this material, thus ensuring a longer durability on site. - Highlights: • Realistic simulations in the cabinet of one-year exposure to environmental conditions • Influence of the lime type on the durability of hemp–lime renders �

Predicting the long-term durability of hemp–lime renders in inland and coastal areas using Mediterranean, Tropical and Semi-arid climatic simulations

Energy Technology Data Exchange (ETDEWEB)

Arizzi, Anna, E-mail: anna.arizzi@ouce.ox.ac.uk [School of Geography and the Environment, University of Oxford, Dyson Perrins Building, South Parks Road, Oxford OX1 3QY (United Kingdom); Viles, Heather [School of Geography and the Environment, University of Oxford, Dyson Perrins Building, South Parks Road, Oxford OX1 3QY (United Kingdom); Martín-Sanchez, Inés [Departamento de Microbiología, Universidad de Granada, Avda. Fuentenueva s/n, 18002 Granada (Spain); Cultrone, Giuseppe [Departamento de Mineralogía y Petrología, Universidad de Granada, Avda. Fuentenueva s/n, 18002 Granada (Spain)

2016-01-15

Hemp-based composites are eco-friendly building materials as they improve energy efficiency in buildings and entail low waste production and pollutant emissions during their manufacturing process. Nevertheless, the organic nature of hemp enhances the bio-receptivity of the material, with likely negative consequences for its long-term performance in the building. The main purpose of this study was to study the response at macro- and micro-scale of hemp–lime renders subjected to weathering simulations in an environmental cabinet (one year was condensed in twelve days), so as to predict their long-term durability in coastal and inland areas with Mediterranean, Tropical and Semi-arid climates, also in relation with the lime type used. The simulated climatic conditions caused almost unnoticeable mass, volume and colour changes in hemp–lime renders. No efflorescence or physical breakdown was detected in samples subjected to NaCl, because the salt mainly precipitates on the surface of samples and is washed away by the rain. Although there was no visible microbial colonisation, alkaliphilic fungi (mainly Penicillium and Aspergillus) and bacteria (mainly Bacillus and Micrococcus) were isolated in all samples. Microbial growth and diversification were higher under Tropical climate, due to heavier rainfall. The influence of the bacterial activity on the hardening of samples has also been discussed here and related with the formation and stabilisation of vaterite in hemp–lime mixes. This study has demonstrated that hemp–lime renders show good durability towards a wide range of environmental conditions and factors. However, it might be useful to take some specific preventive and maintenance measures to reduce the bio-receptivity of this material, thus ensuring a longer durability on site. - Highlights: • Realistic simulations in the cabinet of one-year exposure to environmental conditions • Influence of the lime type on the durability of hemp–lime renders �

A localized flare of dermatitis may render patch tests uninterpretable in some patients with recently controlled widespread dermatitis.

Science.gov (United States)

Magembe, Anna J; Davis, Mark D P; Richardson, Donna M

2009-01-01

Patch testing rarely is confounded by localized dermatitis induced in the area being tested (usually the back). Its occurrence renders the interpretation of patch tests impossible. To review our experience of the circumstances in which this phenomenon occurs during patch testing. We retrospectively reviewed patients with this phenomenon who underwent patch testing from January 1, 2002, through June 30, 2006. Of the 3,569 patients tested, 12 (0.34% [9 men and 3 women]) had development of this phenomenon. All patients previously had recent widespread dermatitis that was suppressed temporarily with topical corticosteroids and wet dressings at the time of patch testing. The period between control of the dermatitis and the initiation of patch testing was less than 1 week for all patients. Three patients (25%) had recently discontinued therapy with systemic corticosteroids (less than 1 week earlier). In patients with irritable skin either immediately after widespread dermatitis is controlled or after the cessation of systemic corticosteroid treatment, a flare of dermatitis induced by patch testing may render patch tests unreadable and therefore uninterpretable. To avoid this confounding occurrence, a waiting period between control of widespread dermatitis and initiation of patch testing is advised.

Evaluation of obstructive airway lesions in complex congenital heart disease using composite volume-rendered images from multislice CT

International Nuclear Information System (INIS)

Choo, Ki Seok; Kim, Chang Won; Lee, Tae Hong; Kim, Suk; Kim, Kun Il; Lee, Hyoung Doo; Ban, Ji Eun; Sung, Si Chan; Chang, Yun Hee

2006-01-01

Multislice CT (MSCT) allows high-quality volume-rendered (VR) and composite volume-rendered images. To investigate the clinical usefulness of composite VR images in the evaluation of the relationship between cardiovascular structures and the airway in children with complex congenital heart disease (CHD). Four- or 16-slice MSCT scanning was performed consecutively in 77 children (mean age 6.4 months) with CHD and respiratory symptoms, a chest radiographic abnormality, or abnormal course of the pulmonary artery on ECHO. MSCT scanning was performed during breathing or after sedation. Contrast medium (2 ml/kg) was administered through a pedal venous route or arm vein in all patients. The VR technique was used to reconstruct the cardiovascular structures and airway, and then both VR images were composed using the commercial software (VoxelPlus 2 ; Daejeon, Korea). Stenoses were seen in the trachea in 1 patient and in the bronchi in 14 patients (19%). Other patients with complex CHD did not have significant airway stenoses. Composite VR images with MSCT can provide more exact airway images in relationship to the surrounding cardiovascular structures and thus help in optimizing management strategies in treating CHD. (orig.)

Efficacy of protocols for induction of chronic hyperthyroidism in male and female mice.

Science.gov (United States)

Engels, Kathrin; Rakov, Helena; Zwanziger, Denise; Hönes, Georg Sebastian; Rehders, Maren; Brix, Klaudia; Köhrle, Josef; Möller, Lars Christian; Führer, Dagmar

2016-10-01

Protocols for induction of hyperthyroidism in mice are highly variable and mostly involve short-term thyroid hormone (TH) treatment. In addition, little is known about a possible influence of sex on experimental TH manipulation. Here we analyzed the efficacy of intraperitoneal vs. oral levothyroxine (T4) administration to induce chronic hyperthyroidism in male and female mice and asked which T4 dosing intervals are required to achieve stable organ thyrotoxicosis. T4 was administered intraperitoneally or orally over a period of 6/7 weeks. Assessment included monitoring of body weight, TH serum concentrations, and serial quantitative TH target gene expression analysis in liver and heart. Our results show that both intraperitoneal and oral T4 treatment are reliable methods for induction of chronic hyperthyroidism in mice. Thereby T4 injection intervals should not exceed 48 h and oral levothyroxine should be administered continuously during experiments and up to sacrifice to ensure a hyperthyroid organ state. Furthermore, we found a sex-dependent variation in levothyroxine-induced TH serum state, with significantly higher T4 concentrations in female mice, while expression of investigated classical TH responsive genes in liver and heart did not vary with animal's sex. In summary, our study shows that common approaches for rendering rodents thyrotoxic can also be used for induction of chronic hyperthyroidism in male and female mice. Thereby T4 dosing intervals are critical as are read-out parameters to verify a chronic thyrotoxic organ state.

Painterly rendered portraits from photographs using a knowledge-based approach

Science.gov (United States)

DiPaola, Steve

2007-02-01

Portrait artists using oils, acrylics or pastels use a specific but open human vision methodology to create a painterly portrait of a live sitter. When they must use a photograph as source, artists augment their process, since photographs have: different focusing - everything is in focus or focused in vertical planes; value clumping - the camera darkens the shadows and lightens the bright areas; as well as color and perspective distortion. In general, artistic methodology attempts the following: from the photograph, the painting must 'simplify, compose and leave out what's irrelevant, emphasizing what's important'. While seemingly a qualitative goal, artists use known techniques such as relying on source tone over color to indirect into a semantic color temperature model, use brush and tonal "sharpness" to create a center of interest, lost and found edges to move the viewers gaze through the image towards the center of interest as well as other techniques to filter and emphasize. Our work attempts to create a knowledge domain of the portrait painter process and incorporate this knowledge into a multi-space parameterized system that can create an array of NPR painterly rendering output by analyzing the photographic-based input which informs the semantic knowledge rules.

3D Web-based HMI with WebGL Rendering Performance

Directory of Open Access Journals (Sweden)

Muennoi Atitayaporn

2016-01-01

Full Text Available An HMI, or Human-Machine Interface, is a software allowing users to communicate with a machine or automation system. It usually serves as a display section in SCADA (Supervisory Control and Data Acquisition system for device monitoring and control. In this papper, a 3D Web-based HMI with WebGL (Web-based Graphics Library rendering performance is presented. The main purpose of this work is to attempt to reduce the limitations of traditional 3D web HMI using the advantage of WebGL. To evaluate the performance, frame rate and frame time metrics were used. The results showed 3D Web-based HMI can maintain the frame rate 60FPS for #cube=0.5K/0.8K, 30FPS for #cube=1.1K/1.6K when it was run on Internet Explorer and Chrome respectively. Moreover, the study found that 3D Web-based HMI using WebGL contains similar frame time in each frame even though the numbers of cubes are up to 5K. This indicated stuttering incurred less in the proposed 3D Web-based HMI compared to the chosen commercial HMI product.

Contrast-enhanced computed tomography angiography and volume-rendered imaging for evaluation of cellophane banding in a dog with extrahepatic portosystemic shunt

Directory of Open Access Journals (Sweden)

H. Yoon

2011-04-01

Full Text Available A 4-year-old, 1.8 kg, male, castrated Maltese was presented for evaluation of urolithiasis. Urinary calculi were composed of ammonium biurate. Preprandial and postprandial bile acids were 44.2 and 187.3 μmol/ , respectively (reference ranges 0–10 and 0–20 μmol/ , respectively. Single-phase contrast-enhanced computed tomography angiography (CTA with volume-rendered imaging (VRI was obtained. VRI revealed a portocaval shunt originating just cranial to a tributary of the gastroduodenal vein and draining into the caudal vena cava at the level of the epiploic foramen. CTA revealed a 3.66 mm-diameter shunt measured at the level of the termination of the shunt and a 3.79 mm-diameter portal vein measured at the level between the origin of the shunt and the porta of the liver. Surgery was performed using cellophane banding without attenuation. Follow-up single-phase CTA with VRI was obtained 10 weeks after surgery. VRI revealed no evidence of portosystemic communication on the level of a cellophane band and caudal to the cellophane band. CTA demonstrated an increased portal vein diameter (3.79–5.27 mm measured at the level between the origin of the shunt and the porta of the liver. Preprandial and postprandial bile acids were 25 and 12.5 μmol/ , respectively (aforementioned respective reference ranges, 3 months post-surgery. No problems were evident at 6 months.

Moisture Transfer through Facades Covered with Organic Binder Renders

Directory of Open Access Journals (Sweden)

Carmen DICO

2013-07-01

Full Text Available Year after year we witness the negative effect of water over buildings, caused by direct or indirect actions. This situation is obvious in case of old, historical building, subjected to this aggression for a long period of time, but new buildings are also affected. Moisture in building materials causes not only structural damage, but also reduces the thermal insulation capacity of building components.Materials like plasters or paints have been used historically for a long period of time, fulfilling two basics functions: Decoration and Protection. The most acute demands are made on exterior plasters, as they, besides being an important decorative element for the facade, must perform two different functions simultaneously: protect the substrate against weathering and moisture without sealing, providing it a certain ability to “breathe” (Heilen, 2005. In order to accomplish this aim, the first step is to understand the hygrothermal behavior of coating and substrate and define the fundamental principles of moisture transfer; According to Künzel’s Facade Protection Theory, two material properties play the most important role: Water absorption and Vapor permeability.In the context of recently adoption (2009 of the “harmonized” European standard EN 15824 – „Specifications for external renders and internal plasters based on organic binders”, this paper deals extensively with the interaction of the two mentioned above properties for the coating materials, covered by EN 15824.

Responses of female rock lizards to multiple scent marks of males: effects of male age, male density and scent over-marking.

Science.gov (United States)

Martín, José; López, Pilar

2013-03-01

Scent-marked substrates may inform conspecifics on the characteristics of territorial males. Scent-marks of male Carpetan rock lizards (Iberolacerta cyreni) affect space use of females, which by selecting an area may increase the probability of mating with the male that has scent-marked that area. However, males do not hold exclusive territories, and scent-marks of different individual males are often together. This may provide complex information from multiple sources on the social structure. Here, we examined female preference in response to scent marks of various males and combinations in a laboratory experiment. Females preferred areas scent-marked by territorial old males against those scent-marked by young satellite-sneaker males. This reflected the known preference of females for mating with old males. In a second experiment, females preferred areas scent-marked by two males to areas of similar size marked by a single male. This may increase the probability of obtaining multiple copulations with different males, which may favour sperm competition and cryptic female choice, or may be a way to avoid infertile males. Finally, when we experimentally over-marked the scent-marks of an old male with scent-marks of a young male, females did not avoid, nor prefer, the over-marked area, suggesting that the quality of the old male may override the presence of a satellite male. We suggest that, irrespective of the causes underlying why a female selects a scent-marked area, this strategy may affect her reproductive success, which may have the same evolutionary consequences that "direct" mate choice decisions of other animals. Copyright © 2013 Elsevier B.V. All rights reserved.

Visual perceptions of male obesity: a cross-cultural study examining male and female lay perceptions of obesity in Caucasian males.

Science.gov (United States)

Robinson, Eric; Hogenkamp, Pleunie S

2015-05-16

Obesity is now common and this may have altered visual perceptions of what constitutes a 'normal' and therefore healthy weight. The present study examined cross-cultural differences in male and female participants' ability to visually identify the weight status of photographed Caucasian males. Five hundred and fifty three male and female young adults from the US (high obesity prevalence), UK and Sweden (lower obesity prevalence) participated in an online study. Participants judged the weight status of a series of photographed healthy weight, overweight and obese (class I) Caucasian males and rated the extent to which they believed each male should consider losing weight. There was a strong tendency for both male and female participants to underestimate the weight status of the photographed overweight and obese males. Photographed males were frequently perceived as being of healthier weight than they actually were. Some modest cross-cultural differences were also observed; US participants were worse at recognising obesity than UK participants (p cross-cultural differences were observed for perceptions or attitudes towards the photographed healthy weight or overweight males. The weight status of overweight and obese (class I) Caucasian males is underestimated when judged by males and females using visual information alone. This study provides initial evidence of modest cross-cultural differences in attitudes toward, and the ability to recognise, obesity in Caucasian males.

Technical analysis of volume-rendering algorithms: application in low-contrast structures using liver vascularisation as a model; Analisi tecnica degli algoritmi di volume rendering: applicazione alle strutture a basso contrsto usando come modello la vascolarizzazione epatica

Energy Technology Data Exchange (ETDEWEB)

Cademartiri, Filippo [Erasmus Medical Center, Rotterdam (Netherlands); Luccichenti, Giacomo [Fondazione Biomedica Europea ONLUS, Roma (Italy); Runza, Giuseppe; Bartolotta, Tommaso Vincenzo; Midiri, Massimo [Palermo Univ., Palermo (Italy). Sezione di scienze radiologiche; Gualerzi, Massimo; Brambilla, Lorenzo; Coruzzi, Paolo [Parma Univ., Parma (Italy). UO di prevenzione e riabilitazione vascolare, Fondazione Don C. Gnocchi ONLUS; Soliani, Paolo; Sianesi, Mario [Parma Univ., Parma (Italy). Dipartimento di chirurgia

2005-04-01

Purpose: To assess the influence of pre-set volume rendering opacity curves (OC) on image quality and to identify which absolute parameters (density of aorta, hepatic parenchyma and portal vein) affect visualization of portal vascular structures (low-contrast structures). Materials and methods: Twenty-two patients underwent a dual-phase spiral CT with the following parameters: collimation 3 mm, pitch 2, increment 1 mm. Three scans were performed: one without contrast medium and the latter two after the injection of contrast material (conventionally identified as 'arterial' and 'portal'). The images were sent to a workstation running on an NT platform equipped with post-processing software allowing three-dimensional (3D) reconstructions to generate volume-rendered images of the vascular supply to the liver. Correlation between the absolute values of aorta, liver and portal vein density, OC parameters, and image quality were assessed. Results: 3D images generated using pre-set OC obtained a much mower overall quality score than those produced with OC set by the operator. High contrast between the liver and the portal vein, for example during the portal vascular phase, allows wider windows, thus improving image quality. Conversely, the OC in the parenchymal phase scans must have a high gradient in order to better differentiate between the vascular structures and the surrounding hepatic parenchyma. Conclusions: Image features considered to be of interest by the operator cannot be simplified by the mean of pre-set OC. Due to their strong individual variability automatic 3D algorithms cannot be universally applied: they should be adapted to both image and patient characteristics. [Italian] Scopo: Valutare l'influenza delle curve di opacit� (CO) preimpostate del volume-rendering sulla qualit� delle immagini, ed identificare quali parametri assoluti (attenzione dell'aorta, del parenchima epatico e della vena porta) influenzano la

Dynamic miniature lighting system with low correlated colour temperature and high colour rendering index for museum lighting of fragile artefacts

DEFF Research Database (Denmark)

Thorseth, Anders; Corell, Dennis Dan; Poulsen, Peter Behrensdorff

2013-01-01

of historical artefacts in display cases at museums and other exhibitions, which can replace 3-5 Watt incandescent light bulbs with a correlated colour temperature (CCT) from 2000 K to 2400 K. The solution decreases the energy consumption by up to 80 %, while maintaining colour rendering indices (Ra) above 90...

Color design model of high color rendering index white-light LED module.

Science.gov (United States)

Ying, Shang-Ping; Fu, Han-Kuei; Hsieh, Hsin-Hsin; Hsieh, Kun-Yang

2017-05-10

The traditional white-light light-emitting diode (LED) is packaged with a single chip and a single phosphor but has a poor color rendering index (CRI). The next-generation package comprises two chips and a single phosphor, has a high CRI, and retains high luminous efficacy. This study employs two chips and two phosphors to improve the diode's color tunability with various proportions of two phosphors and various densities of phosphor in the silicone used. A color design model is established for color fine-tuning of the white-light LED module. The maximum difference between the measured and color-design-model simulated CIE 1931 color coordinates is approximately 0.0063 around a correlated color temperature (CCT) of 2500 K. This study provides a rapid method to obtain the color fine-tuning of a white-light LED module with a high CRI and luminous efficacy.

Mutation of Drosophila dopamine receptor DopR leads to male-male courtship behavior.

Science.gov (United States)

Chen, Bin; Liu, He; Ren, Jing; Guo, Aike

2012-07-06

In Drosophila, dopamine plays important roles in many biological processes as a neuromodulator. Previous studies showed that dopamine level could affect fly courtship behaviors. Disturbed dopamine level leads to abnormal courtship behavior in two different ways. Dopamine up-regulation induces male-male courtship behavior, while down-regulation of dopamine level results in increased sexual attractiveness of males towards other male flies. Until now, the identity of the dopamine receptor involved in this abnormal male-male courtship behavior remains unknown. Here we used genetic approaches to investigate the role of dopamine receptors in fly courtship behavior. We found that a dopamine D1-like receptor, DopR, was involved in fly courtship behavior. DopR mutant male flies display male-male courtship behavior. This behavior is mainly due to the male's increased propensity to court other males. Expression of functional DopR successfully rescued this mutant phenotype. Knock-down of D2-like receptor D2R and another D1-like receptor, DAMB, did not induce male-male courtship behavior, indicating the receptor-type specificity of this phenomenon. Our findings provide insight into a possible link between dopamine level disturbance and the induced male-male courtship behavior. Copyright © 2012 Elsevier Inc. All rights reserved.

The use of oak chips and coconut fiber as biofilter media to remove vocs in rendering process.

Science.gov (United States)

Tymczyna, Leszek; Chmielowiec-Korzeniowska, Anna; Paluszak, Zbigniew; Dobrowolska, Magadalena; Banach, Marcin; Pulit, Jolanta

2013-01-01

The study evaluated the effectiveness of air biofiltration in rendering plants. The biofilter material comprised compost soil (40%) and peat (40%) mixed up with coconut fiber (medium A) and oak bark (medium B). During biofiltration average VOCs reduction reached 88.4% for medium A and 89.7% for medium B. A positive relationship of aldehyde reduction from material humidity (r = 0.502; α<0.05) was also noted. Other biomaterial parameters did not affect the treatment efficiency.

Genital sores - male

Science.gov (United States)

Sores - male genitals; Ulcers - male genitals ... A common cause of male genital sores are infections that are spread through sexual contact, such as: Genital herpes (small, painful blisters filled with clear ...

Male pattern baldness

Science.gov (United States)

Alopecia in men; Baldness - male; Hair loss in men; Androgenetic alopecia ... Male pattern baldness is related to your genes and male sex hormones. It usually follows a pattern of receding hairline and ...

Hybrid male sterility and genome-wide misexpression of male reproductive proteases.

Science.gov (United States)

Gomes, Suzanne; Civetta, Alberto

2015-07-06

Hybrid male sterility is a common barrier to gene flow between species. Previous studies have posited a link between misregulation of spermatogenesis genes in interspecies hybrids and sterility. However, in the absence of fully fertile control hybrids, it is impossible to differentiate between misregulation associated with sterility vs. fast male gene regulatory evolution. Here, we differentiate between these two possibilities using a D. pseudoobscura species pair that experiences unidirectional hybrid sterility. We identify genes uniquely misexpressed in sterile hybrid male reproductive tracts via RNA-seq. The sterile male hybrids had more misregulated and more over or under expressed genes relative to parental species than the fertile male hybrids. Proteases were the only gene ontology class overrepresented among uniquely misexpressed genes, with four located within a previously identified hybrid male sterility locus. This result highlights the potential role of a previously unexplored class of genes in interspecific hybrid male sterility and speciation.

Choice-Making in Rendering Culture-Bound Elements in Literary Translation: A Case Study on the English Translation Of «????»

Science.gov (United States)

Meihua, Song

2014-01-01

How to render culture-bound elements into a foreign language remains one of the most challenging tasks for all translators, especially, when the source text is a literary one. To retain the aesthetic effects and other stylistic features of importance, some argue that choice can be made from either domestication or foreignization with…

Formulating CdSe quantum dots for white light-emitting diodes with high color rendering index

International Nuclear Information System (INIS)

Li, Fei; Li, Wan-Nan; Fu, Shao-Yun; Xiao, Hong-Mei

2015-01-01

Generation of white light using CdSe quantum dots (QDs) alone presents exciting possibilities for solid state lighting technology. In this work, Cd(Ac) 2 ·2H 2 O and Na 2 SeSO 3 are used as precursors to synthesize CdSe-QDs with an average diameter ranging from 2.77 to 4.65 nm at the low temperature from 60 to 180 °C. Smaller CdSe-QDs with an average diameter of 2.29 nm are got by an oxidation etching process using H 2 O 2 as oxidant. The structural and optical properties of these QDs are investigated and proper formulation of CdSe QDs with various sizes is carefully designed to achieve white light with a high color rendering index (CRI). It is observed for the first time that the as-prepared white light-emitting diodes from single CdSe-QDs show the Commission Inernationale del’Eclairage coordinate (CIE) of (0.30,0.34) very close to that (0.33,0.33) of pure white light and a high CRI of 84. Owing to these advantages, the as-prepared white light-emitting diodes from a single compound are promising for lighting applications. - Highlights: • CdSe-quantum dots (QDs) with a continuously changing size from 2.31 to 4.74 nm are prepared. • The obtained CdSe-QDs emit lights with tunable colors in the whole visible range. • The obtained mixture sample generates white light with a high color rendering index of 84. • The sample yields white light with the CIE coordinate (0.30, 0.34) very close to that of pure white light

Characterization of a smartphone size haptic rendering system based on thin-film AlN actuators on glass substrates

Science.gov (United States)

Bernard, F.; Casset, F.; Danel, J. S.; Chappaz, C.; Basrour, S.

2016-08-01

This paper presents for the first time the characterization of a smartphone-size haptic rendering system based on the friction modulation effect. According to previous work and finite element modeling, the homogeneous flexural modes are needed to get the haptic feedback effect. The device studied consists of a thin film AlN transducers deposited on an 110  ×  65 mm2 glass substrate. The transducer’s localization on the glass plate allows a transparent central area of 90  ×  49 mm2. Electrical and mechanical parameters of the system are extracted from measurement. From this extraction, the electrical impedance matching reduced the applied voltage to 17.5 V AC and the power consumption to 1.53 W at the resonance frequency of the vibrating system to reach the haptic rendering specification. Transient characterizations of the actuation highlight a delay under the dynamic tactile detection. The characterization of the AlN transducers used as sensors, including the noise rejection, the delay or the output charge amplitude allows detections with high accuracy of any variation due to external influences. Those specifications are the first step to a low-power-consumption feedback-looped system.

Characterization of a smartphone size haptic rendering system based on thin-film AlN actuators on glass substrates

International Nuclear Information System (INIS)

Bernard, F; Basrour, S; Casset, F; Danel, J S; Chappaz, C

2016-01-01

This paper presents for the first time the characterization of a smartphone-size haptic rendering system based on the friction modulation effect. According to previous work and finite element modeling, the homogeneous flexural modes are needed to get the haptic feedback effect. The device studied consists of a thin film AlN transducers deposited on an 110  ×  65 mm 2 glass substrate. The transducer’s localization on the glass plate allows a transparent central area of 90  ×  49 mm 2 . Electrical and mechanical parameters of the system are extracted from measurement. From this extraction, the electrical impedance matching reduced the applied voltage to 17.5 V AC and the power consumption to 1.53 W at the resonance frequency of the vibrating system to reach the haptic rendering specification. Transient characterizations of the actuation highlight a delay under the dynamic tactile detection. The characterization of the AlN transducers used as sensors, including the noise rejection, the delay or the output charge amplitude allows detections with high accuracy of any variation due to external influences. Those specifications are the first step to a low-power-consumption feedback-looped system. (paper)

Male contraception.

Science.gov (United States)

Amory, John K

2016-11-01

Although female contraceptives are very effective at preventing unintended pregnancy, some women can not use them because of health conditions or side-effects, leaving some couples without effective contraceptive options. In addition, many men wish to take active responsibility for family planning. Thus, there is a great need for male contraceptives to prevent unintended pregnancies, of which 80-90 million occur annually. At present, effective male contraceptive options are condoms and vasectomy, which are not ideal for all men. Therefore, efforts are under way to develop novel male contraceptives. This paper briefly reviews the advantages and disadvantages of condoms and vasectomies and then discusses the research directed toward development of novel methods of male contraception. Copyright © 2016 American Society for Reproductive Medicine. Published by Elsevier Inc. All rights reserved.

Physiotherapy management of patients with HIV-associated Kaposi's sarcoma.

Science.gov (United States)

Harris-Love, Michael O; Shrader, Joseph A

2004-01-01

Kaposi's sarcoma is the most common form of cancer in patients with human immunodeficiency virus (HIV) infection. Although Kaposi sarcoma lesions may contribute to significant physical impairments, there is a lack of scientific literature detailing the role of physiotherapy in the treatment of HIV-associated Kaposi's sarcoma. The present Case Report includes two males, aged 36 and 39 years, seropositive for HIV with invasive Kaposi's sarcoma. Patient A was evaluated for bilateral foot pain caused by plantar surface Kaposi s sarcoma lesions that rendered him unable to walk. He progressed to walking 400feet after a treatment regimen of gait training with the use of custom plastazote sandals. Patient B was evaluated for right lower extremity lymphoedema secondary to invasive Kaposi's sarcoma. He experienced an 18% reduction in limb volume, a 38% reduction in pain and a 20 degrees increase in terminal knee flexion after therapeutic exercise and the use of compressive bandaging and garments. This Case Report suggests that physiotherapy interventions may be valuable in the conservative management of patients with HIV-associated Kaposi s sarcoma.

A Study of Layout, Rendering, and Interaction Methods for Immersive Graph Visualization.

Science.gov (United States)

Kwon, Oh-Hyun; Muelder, Chris; Lee, Kyungwon; Ma, Kwan-Liu

2016-07-01

Information visualization has traditionally limited itself to 2D representations, primarily due to the prevalence of 2D displays and report formats. However, there has been a recent surge in popularity of consumer grade 3D displays and immersive head-mounted displays (HMDs). The ubiquity of such displays enables the possibility of immersive, stereoscopic visualization environments. While techniques that utilize such immersive environments have been explored extensively for spatial and scientific visualizations, contrastingly very little has been explored for information visualization. In this paper, we present our considerations of layout, rendering, and interaction methods for visualizing graphs in an immersive environment. We conducted a user study to evaluate our techniques compared to traditional 2D graph visualization. The results show that participants answered significantly faster with a fewer number of interactions using our techniques, especially for more difficult tasks. While the overall correctness rates are not significantly different, we found that participants gave significantly more correct answers using our techniques for larger graphs.

Experimental and rendering-based investigation of laser radar cross sections of small unmanned aerial vehicles

Science.gov (United States)

Laurenzis, Martin; Bacher, Emmanuel; Christnacher, Frank

2017-12-01

Laser imaging systems are prominent candidates for detection and tracking of small unmanned aerial vehicles (UAVs) in current and future security scenarios. Laser reflection characteristics for laser imaging (e.g., laser gated viewing) of small UAVs are investigated to determine their laser radar cross section (LRCS) by analyzing the intensity distribution of laser reflection in high resolution images. For the first time, LRCSs are determined in a combined experimental and computational approaches by high resolution laser gated viewing and three-dimensional rendering. An optimized simple surface model is calculated taking into account diffuse and specular reflectance properties based on the Oren-Nayar and the Cook-Torrance reflectance models, respectively.

Reduction of dopamine level enhances the attractiveness of male Drosophila to other males.

Science.gov (United States)

Liu, Tong; Dartevelle, Laurence; Yuan, Chunyan; Wei, Hongping; Wang, Ying; Ferveur, Jean-François; Guo, Aike

2009-01-01

Dopamine is an important neuromodulator in animals and its roles in mammalian sexual behavior are extensively studied. Drosophila as a useful model system is widely used in many fields of biological studies. It has been reported that dopamine reduction can affect female receptivity in Drosophila and leave male-female courtship behavior unaffected. Here, we used genetic and pharmacological approaches to decrease the dopamine level in dopaminergic cells in Drosophila, and investigated the consequence of this manipulation on male homosexual courtship behavior. We find that reduction of dopamine level can induce Drosophila male-male courtship behavior, and that this behavior is mainly due to the increased male attractiveness or decreased aversiveness towards other males, but not to their enhanced propensity to court other males. Chemical signal input probably plays a crucial role in the male-male courtship induced by the courtees with reduction of dopamine. Our finding provides insight into the relationship between the dopamine reduction and male-male courtship behavior, and hints dopamine level is important for controlling Drosophila courtship behavior.

Age, Health and Attractiveness Perception of Virtual (Rendered) Human Hair.

Science.gov (United States)

Fink, Bernhard; Hufschmidt, Carla; Hirn, Thomas; Will, Susanne; McKelvey, Graham; Lankhof, John

2016-01-01

The social significance of physical appearance and beauty has been documented in many studies. It is known that even subtle manipulations of facial morphology and skin condition can alter people's perception of a person's age, health and attractiveness. While the variation in facial morphology and skin condition cues has been studied quite extensively, comparably little is known on the effect of hair on social perception. This has been partly caused by the technical difficulty of creating appropriate stimuli for investigations of people's response to systematic variation of certain hair characteristics, such as color and style, while keeping other features constant. Here, we present a modeling approach to the investigation of human hair perception using computer-generated, virtual (rendered) human hair. In three experiments, we manipulated hair diameter (Experiment 1), hair density (Experiment 2), and hair style (Experiment 3) of human (female) head hair and studied perceptions of age, health and attractiveness. Our results show that even subtle changes in these features have an impact on hair perception. We discuss our findings with reference to previous studies on condition-dependent quality cues in women that influence human social perception, thereby suggesting that hair is a salient feature of human physical appearance, which contributes to the perception of beauty.

Uptake of Home-Based Syphilis and Human Immunodeficiency Virus Testing Among Male Partners of Pregnant Women in Western Kenya.

Science.gov (United States)

Mark, Jennifer; Kinuthia, John; Roxby, Alison C; Krakowiak, Daisy; Osoti, Alfred; Richardson, Barbra A; Gone, Molly Ann; Asila, Victor; Parikh, Saloni; Farquhar, Carey

2017-09-01

Few men are tested for syphilis or human immunodeficiency virus (HIV) during their partner's pregnancy, a high-risk period for HIV and syphilis transmission. Offering home-based rapid testing of syphilis to couples during pregnancy can support prevention efforts to reduce transmission of sexually transmitted diseases and adverse pregnancy outcomes. We assessed men's uptake of paired (separate tests, single blood draw) point-of-care syphilis and HIV tests within a randomized controlled trial of pregnant women who received clinic or home partner HIV testing. We evaluated acceptance of paired HIV-syphilis testing during pregnancy or at 6 months postpartum, and evaluated whether addition of syphilis testing affected the uptake of HIV testing among men. Of 601 women, we were unable to meet 101 male partners, and 180 tested before syphilis tests were available. Paired syphilis and HIV testing was offered at home to 80 men during pregnancy and to 230 men postpartum. For syphilis, 93% of men agreed to test during pregnancy and 98% agreed postpartum. For paired syphilis and HIV testing, 91% of men tested for both during pregnancy and 96% tested postpartum. Before syphilis test introduction, 96% of men accepted HIV testing, compared with 95% of men who accepted HIV testing when paired testing was offered. Uptake of syphilis and HIV testing was high among male partners offered couple testing at home. Introducing syphilis testing did not adversely affect HIV testing among men. Point-of-care diagnostics outside facilities can increase testing of male partners who rarely accompany women to antenatal clinics.

Customization, control, and characterization of a commercial haptic device for high-fidelity rendering of weak forces.

Science.gov (United States)

Gurari, Netta; Baud-Bovy, Gabriel

2014-09-30

The emergence of commercial haptic devices offers new research opportunities to enhance our understanding of the human sensory-motor system. Yet, commercial device capabilities have limitations which need to be addressed. This paper describes the customization of a commercial force feedback device for displaying forces with a precision that exceeds the human force perception threshold. The device was outfitted with a multi-axis force sensor and closed-loop controlled to improve its transparency. Additionally, two force sensing resistors were attached to the device to measure grip force. Force errors were modeled in the frequency- and time-domain to identify contributions from the mass, viscous friction, and Coulomb friction during open- and closed-loop control. The effect of user interaction on system stability was assessed in the context of a user study which aimed to measure force perceptual thresholds. Findings based on 15 participants demonstrate that the system maintains stability when rendering forces ranging from 0-0.20 N, with an average maximum absolute force error of 0.041 ± 0.013 N. Modeling the force errors revealed that Coulomb friction and inertia were the main contributors to force distortions during respectively slow and fast motions. Existing commercial force feedback devices cannot render forces with the required precision for certain testing scenarios. Building on existing robotics work, this paper shows how a device can be customized to make it reliable for studying the perception of weak forces. The customized and closed-loop controlled device is suitable for measuring force perceptual thresholds. Copyright © 2014 Elsevier B.V. All rights reserved.

True Yellow Light-Emitting Diodes as Phosphor for Tunable Color-Rendering Index Laser-Based White Light

KAUST Repository

Janjua, Bilal; Ng, Tien Khee; Zhao, Chao; Prabaswara, Aditya; Consiglio, Giuseppe Bernardo; Priante, Davide; Shen, Chao; Elafandy, Rami T.; Anjum, Dalaver H.; Alhamoud, Abdullah A.; Alatawi, Abdullah A.; Yang, Yang; Alyamani, Ahmed Y.; El-Desouki, Munir M.; Ooi, Boon S.

2016-01-01

An urgent challenge for the lighting research community is the lack of efficient optical devices emitting in between 500 and 600 nm, resulting in the “green-yellow gap”. In particular, true green (∼555 nm) and true yellow (∼590 nm), along with blue and red, constitute four technologically important colors. The III-nitride material system, being the most promising choice of platform to bridge this gap, still suffers from high dislocation density and poor crystal quality in realizing high-power, efficient devices. Particularly, the high polarization fields in the active region of such 2D quantum confined structures prevent efficient recombination of carriers. Here we demonstrate a true yellow nanowire (NW) light emitting diode (LED) with peak emission of 588 nm at 29.5 A/cm2 (75 mA in a 0.5 × 0.5 mm2 device) and a low turn-on voltage of ∼2.5 V, while having an internal quantum efficiency of 39%, and without “efficiency droop” up to an injection current density of 29.5 A/cm2. By mixing yellow light from a NW LED in reflective configuration with that of a red, green, and blue laser diode (LD), white light with a correlated color temperature of ∼6000 K and color-rendering index of 87.7 was achieved. The nitride-NW-based device offers a robust, long-term stability for realizing yellow light emitters for tunable color-rendering index solid-state lighting, on a scalable, low-cost, foundry-compatible titanium/silicon substrate, suitable for industry uptake.

True Yellow Light-Emitting Diodes as Phosphor for Tunable Color-Rendering Index Laser-Based White Light

KAUST Repository

Janjua, Bilal

2016-10-11

An urgent challenge for the lighting research community is the lack of efficient optical devices emitting in between 500 and 600 nm, resulting in the “green-yellow gap”. In particular, true green (∼555 nm) and true yellow (∼590 nm), along with blue and red, constitute four technologically important colors. The III-nitride material system, being the most promising choice of platform to bridge this gap, still suffers from high dislocation density and poor crystal quality in realizing high-power, efficient devices. Particularly, the high polarization fields in the active region of such 2D quantum confined structures prevent efficient recombination of carriers. Here we demonstrate a true yellow nanowire (NW) light emitting diode (LED) with peak emission of 588 nm at 29.5 A/cm2 (75 mA in a 0.5 × 0.5 mm2 device) and a low turn-on voltage of ∼2.5 V, while having an internal quantum efficiency of 39%, and without “efficiency droop” up to an injection current density of 29.5 A/cm2. By mixing yellow light from a NW LED in reflective configuration with that of a red, green, and blue laser diode (LD), white light with a correlated color temperature of ∼6000 K and color-rendering index of 87.7 was achieved. The nitride-NW-based device offers a robust, long-term stability for realizing yellow light emitters for tunable color-rendering index solid-state lighting, on a scalable, low-cost, foundry-compatible titanium/silicon substrate, suitable for industry uptake.

The efficacy of Aspergillus niger phytase in rendering phytate phosphorus available for absorption in pigs is influenced by pig physiological status

NARCIS (Netherlands)

Kemme, P.A.; Jongbloed, A.W.; Mroz, Z.; Beynen, A.C.

1997-01-01

We performed an experiment with 112 piglets, 32 growing-finishing pigs, and 12 sows during pregnancy and lactation to test the hypotheses that apparent total tract digestibilities of P and Ca as well as the efficacy of Aspergillus niger phytase in rendering phytate P available in pigs depend on pig

SPATIOTEMPORAL VISUALIZATION OF TIME-SERIES SATELLITE-DERIVED CO2 FLUX DATA USING VOLUME RENDERING AND GPU-BASED INTERPOLATION ON A CLOUD-DRIVEN DIGITAL EARTH

Directory of Open Access Journals (Sweden)

S. Wu

2017-10-01

Full Text Available The ocean carbon cycle has a significant influence on global climate, and is commonly evaluated using time-series satellite-derived CO2 flux data. Location-aware and globe-based visualization is an important technique for analyzing and presenting the evolution of climate change. To achieve realistic simulation of the spatiotemporal dynamics of ocean carbon, a cloud-driven digital earth platform is developed to support the interactive analysis and display of multi-geospatial data, and an original visualization method based on our digital earth is proposed to demonstrate the spatiotemporal variations of carbon sinks and sources using time-series satellite data. Specifically, a volume rendering technique using half-angle slicing and particle system is implemented to dynamically display the released or absorbed CO2 gas. To enable location-aware visualization within the virtual globe, we present a 3D particlemapping algorithm to render particle-slicing textures onto geospace. In addition, a GPU-based interpolation framework using CUDA during real-time rendering is designed to obtain smooth effects in both spatial and temporal dimensions. To demonstrate the capabilities of the proposed method, a series of satellite data is applied to simulate the air-sea carbon cycle in the China Sea. The results show that the suggested strategies provide realistic simulation effects and acceptable interactive performance on the digital earth.

Male Infertility

Science.gov (United States)

... hypothalamus, pituitary, thyroid and adrenal glands. Low testosterone (male hypogonadism) and other hormonal problems have a number of possible underlying causes. Defects of tubules that transport sperm. Many ... syndrome — in which a male is born with two X chromosomes and one ...

3D reconstruction from X-ray fluoroscopy for clinical veterinary medicine using differential volume rendering

International Nuclear Information System (INIS)

Khongsomboon, K.; Hamamoto, Kazuhiko; Kondo, Shozo

2007-01-01

3D reconstruction from ordinary X-ray equipment which is not CT or MRI is required in clinical veterinary medicine. Authors have already proposed a 3D reconstruction technique from X-ray photograph to present bone structure. Although the reconstruction is useful for veterinary medicine, the technique has two problems. One is about exposure of X-ray and the other is about data acquisition process. An x-ray equipment which is not special one but can solve the problems is X-ray fluoroscopy. Therefore, in this paper, we propose a method for 3D-reconstruction from X-ray fluoroscopy for clinical veterinary medicine. Fluoroscopy is usually used to observe a movement of organ or to identify a position of organ for surgery by weak X-ray intensity. Since fluoroscopy can output a observed result as movie, the previous two problems which are caused by use of X-ray photograph can be solved. However, a new problem arises due to weak X-ray intensity. Although fluoroscopy can present information of not only bone structure but soft tissues, the contrast is very low and it is very difficult to recognize some soft tissues. It is very useful to be able to observe not only bone structure but soft tissues clearly by ordinary X-ray equipment in the field of clinical veterinary medicine. To solve this problem, this paper proposes a new method to determine opacity in volume rendering process. The opacity is determined according to 3D differential coefficient of 3D reconstruction. This differential volume rendering can present a 3D structure image of multiple organs volumetrically and clearly for clinical veterinary medicine. This paper shows results of simulation and experimental investigation of small dog and evaluation by veterinarians. (author)

Bill redness is positively associated with reproduction and survival in male and female zebra finches.

Directory of Open Access Journals (Sweden)

Mirre J P Simons

Full Text Available Sexual traits can serve as honest indicators of phenotypic quality when they are costly. Brightly coloured yellow to red traits, which are pigmented by carotenoids, are relatively common in birds, and feature in sexual selection. Carotenoids have been linked to immune and antioxidant function, and the trade-off between ornamentation and these physiological functions provides a potential mechanism rendering carotenoid based signals costly. Mutual ornamentation is also common in birds and can be maintained by mutual mate choice for this ornament or by a correlated response in one sex to selection on the other sex. When selection pressures differ between the sexes this can cause intralocus sexual conflict. Sexually antagonistic selection pressures have been demonstrated for few sexual traits, and for carotenoid-dependent traits there is a single example: bill redness was found to be positively associated with survival and reproductive output in male zebra finches, but negatively so in females. We retested these associations in our captive zebra finch population without two possible limitations of this earlier study. Contrary to the earlier findings, we found no evidence for sexually antagonistic selection. In both sexes, individuals with redder bills showed higher survival. This association disappeared among the females with the reddest bills. Furthermore, females with redder bills achieved higher reproductive output. We conclude that bill redness of male and female zebra finches honestly signals phenotypic quality, and discuss the possible causes of the differences between our results and earlier findings.

Sneaker Males Affect Fighter Male Body Size and Sexual Size Dimorphism in Salmon.

Science.gov (United States)

Weir, Laura K; Kindsvater, Holly K; Young, Kyle A; Reynolds, John D

2016-08-01

Large male body size is typically favored by directional sexual selection through competition for mates. However, alternative male life-history phenotypes, such as "sneakers," should decrease the strength of sexual selection acting on body size of large "fighter" males. We tested this prediction with salmon species; in southern populations, where sneakers are common, fighter males should be smaller than in northern populations, where sneakers are rare, leading to geographical clines in sexual size dimorphism (SSD). Consistent with our prediction, fighter male body size and SSD (fighter male∶female size) increase with latitude in species with sneaker males (Atlantic salmon Salmo salar and masu salmon Oncorhynchus masou) but not in species without sneakers (chum salmon Oncorhynchus keta and pink salmon Oncorhynchus gorbuscha). This is the first evidence that sneaker males affect SSD across populations and species, and it suggests that alternative male mating strategies may shape the evolution of body size.

Psychometric validation of the behavioral indicators of pain scale for the assessment of pain in mechanically ventilated and unable to self-report critical care patients.

Science.gov (United States)

Latorre-Marco, I; Acevedo-Nuevo, M; Solís-Muñoz, M; Hernández-Sánchez, L; López-López, C; Sánchez-Sánchez, M M; Wojtysiak-Wojcicka, M; de Las Pozas-Abril, J; Robleda-Font, G; Frade-Mera, M J; De Blas-García, R; Górgolas-Ortiz, C; De la Figuera-Bayón, J; Cavia-García, C

2016-11-01

To assess the psychometric properties of the behavioral indicators of pain scale (ESCID) when applied to a wide range of medical and surgical critical patients. A multicentre, prospective observational study was designed to validate a scale measuring instrument. Twenty Intensive Care Units of 14 hospitals belonging to the Spanish National Health System. A total of 286 mechanically ventilated, unable to self-report critically ill medical and surgical adult patients. Pain levels were measured by two independent evaluators simultaneously, using two scales: ESCID and the behavioral pain scale (BPS). Pain was observed before, during, and after two painful procedures (turning, tracheal suctioning) and one non-painful procedure. ESCID reliability was measured on the basis of internal consistency using the Cronbach-α coefficient. Inter-rater and intra-rater agreement were measured. The Spearman correlation coefficient was used to assess the correlation between ESCID and BPS. A total of 4386 observations were made in 286 patients (62% medical and 38% surgical). High correlation was found between ESCID and BPS (r=0.94-0.99; p<0.001), together with high intra-rater and inter-rater concordance. ESCID was internally reliable, with a Cronbach-α value of 0.85 (95%CI 0.81-0.88). Cronbach-α coefficients for ESCID domains were high: facial expression 0.87 (95%CI 0.84-0.89), calmness 0.84 (95%CI 0.81-0.87), muscle tone 0.80 (95%CI 0.75-0.84), compliance with mechanical ventilation 0.70 (95%CI 0.63-0.75) and consolability 0.85 (95%CI 0.81-0.88). ESCID is valid and reliable for measuring pain in mechanically ventilated unable to self-report medical and surgical critical care patients. CLINICALTRIALS.GOV: NCT01744717. Copyright © 2016 The Authors. Publicado por Elsevier España, S.L.U. All rights reserved.

Digital tomosynthesis rendering of joint margins for arthritis assessment

Science.gov (United States)

Duryea, Jeffrey W.; Neumann, Gesa; Yoshioka, Hiroshi; Dobbins, James T., III

2004-05-01

PURPOSE: Rheumatoid arthritis (RA) of the hand is a significant healthcare problem. Techniques to accurately quantity the structural changes from RA are crucial for the development and prescription of therapies. Analysis of radiographic joint space width (JSW) is widely used and has demonstrated promise. However, radiography presents a 2D view of the joint. In this study we performed tomosynthesis reconstructions of proximal interphalangeal (PIP), and metacarpophalangeal (MCP) joints to measure the 3D joint structure. METHODS: We performed a reader study using simulated radiographs of 12 MCP and 12 PIP joints from skeletal specimens imaged with micro-CT. The tomosynthesis technique provided images of reconstructed planes with 0.75 mm spacing, which were presented to 2 readers with a computer tool. The readers were instructed to delineate the joint surfaces on tomosynthetic slices where they could visualize the margins. We performed a quantitative analysis of 5 slices surrounding the central portion of each joint. Reader-determined JSW was compared to a gold standard. As a figure of merit we calculated the average root-mean square deviation (RMSD). RESULTS: RMSD was 0.22 mm for both joints. For the individual joints, RMSD was 0.18 mm (MCP), and 0.26 mm (PIP). The reduced performance for the smaller PIP joints suggests that a slice spacing less than 0.75 mm may be more appropriate. CONCLUSIONS: We have demonstrated the capability of limited 3D rendering of joint surfaces using digital tomosynthesis. This technique promises to provide an improved method to visualize the structural changes of RA.

10 CFR Appendix R to Subpart B of... - Uniform Test Method for Measuring Average Lamp Efficacy (LE), Color Rendering Index (CRI), and...

Science.gov (United States)

2010-01-01

... (LE), Color Rendering Index (CRI), and Correlated Color Temperature (CCT) of Electric Lamps R Appendix R to Subpart B of Part 430 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY CONSERVATION PROGRAM FOR CONSUMER PRODUCTS Test Procedures Pt. 430, Subpt. B, App. R Appendix R to Subpart B of Part...

TRADISI LISAN MALE-MALE: NYANYIAN KEMATIAN DALAM MASYARAKAT CIACIA: KAJIAN SOSIOLOGIS DAN UPAYA PEWARISAN

Directory of Open Access Journals (Sweden)

Asrif Asrif

2016-08-01

  Oral Tradition of Male-Male: Death Anthem Ciacia: Sosiological Studies and an Effort to Pass It On to the next Generation. Male-Male is lyrics sung upon the death of a member of the society who is considered a perfect person. This oral tradition shows the society appreciation towards the person through the expression of sadness, longing, partience and praises. Male-Male serves various functions; both private functions (the singer and host, and societal function (the guests. For th singer and the host, this tradition serves as consolation, caring towards other members, dissemination of social values and religion, prestige, and passing on a tradition. For the society, Male-Male functions as a self remainder of death, strengthening faith, increasing empathy and solidarity. Efforts to guarantee the continuity of this tradition by the next generation are required. Formal effortcan be made through schools, and the informal ones can be made through the strengthening of tradition bodies. Keywords: Oral tradition, Male-Male, Sociology, and Passing the tradition

Men and masculinities in forensic psychiatric care: an interview study concerning male nurses' experiences of working with male caregivers and male patients.

Science.gov (United States)

Kumpula, Esa; Ekstrand, Per

2009-09-01

Forensic psychiatric care is largely populated by men--as patients, caregivers, and nurses. Previous research has not focused on the meaning of gender in this context. The aim of this study is to analyse male nurses' experiences of working with male caregivers and attending to male patients in forensic psychiatric care. Data were collected through interviews with six male nurses. The results consist of five themes. Protection and defence are key aspects of care and male caregivers gain status and authority through their physical strength. This could hamper caring and provide male caregivers with a superior position in the department.

Brain ageing changes proteoglycan sulfation, rendering perineuronal nets more inhibitory.

Science.gov (United States)

Foscarin, Simona; Raha-Chowdhury, Ruma; Fawcett, James W; Kwok, Jessica C F

2017-06-28

Chondroitin sulfate (CS) proteoglycans in perineuronal nets (PNNs) from the central nervous system (CNS) are involved in the control of plasticity and memory. Removing PNNs reactivates plasticity and restores memory in models of Alzheimer's disease and ageing. Their actions depend on the glycosaminoglycan (GAG) chains of CS proteoglycans, which are mainly sulfated in the 4 (C4S) or 6 (C6S) positions. While C4S is inhibitory, C6S is more permissive to axon growth, regeneration and plasticity. C6S decreases during critical period closure. We asked whether there is a late change in CS-GAG sulfation associated with memory loss in aged rats. Immunohistochemistry revealed a progressive increase in C4S and decrease in C6S from 3 to 18 months. GAGs extracted from brain PNNs showed a large reduction in C6S at 12 and 18 months, increasing the C4S/C6S ratio. There was no significant change in mRNA levels of the chondroitin sulfotransferases. PNN GAGs were more inhibitory to axon growth than those from the diffuse extracellular matrix. The 18-month PNN GAGs were more inhibitory than 3-month PNN GAGs. We suggest that the change in PNN GAG sulfation in aged brains renders the PNNs more inhibitory, which lead to a decrease in plasticity and adversely affect memory.

Condition-dependent female preference for male genitalia length is based on male reproductive tactics.

Science.gov (United States)

Hernandez-Jimenez, Armando; Rios-Cardenas, Oscar

2017-12-06

There is extensive morphological variation of male genitalia across animals with internal fertilization, even among closely related species. Most studies attempting to explain this extraordinary diversity have focused on processes that occur post-copula (e.g. sperm competition, cryptic female choice). Only a few studies have focused on the pre-copula process of female preference. In addition, the extent to which this variation could be associated with the use of different reproductive tactics has yet to be explored. Here, we show that female preference for male genitalia length in two livebearing fishes depends on the type of reproductive tactic of the males being evaluated as well as the body condition of the female. In a species where all males coax females to acquire matings (courters), females preferred males with short genitalia. In a species with genetically influenced alternative reproductive tactics (courter males that only court and produce courter sons, sneaker males that use the coercive tactic of sneak chase and produce sneaker sons), female preference depended on an interaction between male tactic and female condition: females in good condition preferred courter males with short genitalia, and sneaker males with long genitalia. Our results suggest that female preference for male traits favourable to their sons may be an important factor contributing to the diversification of male genitalia. Despite the contrasting selection for genitalia length that our female preference tests suggest, we found no significant differences in genitalia length between coaxing (courters) and coercive (sneakers) males. Our study represents a starting point to more clearly understand the role of alternative reproductive tactics and variation in female mate preference in the evolution of male genitalia. © 2017 The Author(s).

Heterosexual Men's Anger in Response to Male Homosexuality: Effects of Erotic and Non-Erotic Depictions of Male-Male Intimacy and Sexual Prejudice

OpenAIRE

Hudepohl, Adam D.; Parrott, Dominic J.; Zeichner, Amos

2010-01-01

The present study compared effects of erotic and non-erotic depictions of male-male intimacy on the experience of anger in heterosexual men. Data came from three independent laboratory studies designed to elicit anger in response to erotic or non-erotic depictions of male-male and male-female intimacy. All participants completed a measure of sexual prejudice and anger was assessed before and after viewing the erotic or non-erotic video. Among high-prejudiced men, viewing erotic and non-erotic...

Male baldness.

Science.gov (United States)

Clarke, Philip

2016-04-01

Male baldness is very common. Its effect on individuals is extremely variable, and in some people it will have a significant adverse effect on their quality of life. The objectives of this article are to help general practitioners (GPs) be aware of potential health problems related to male baldness, to have an approach to assessing hair loss and to be aware of treatment options. Male baldness is, most often, a normal occurrence, but it may have significant effects on a man's health. It may also be a pointer to other potential health issues. The GP is in the ideal position to conduct an initial evaluation, consider other health issues and advise on treatment options.

SCHIZOPHRENIA - THE SPIRIT POSSESSED 23 YEAR OLD MALE ...

African Journals Online (AJOL)

hi-tech

taken hold of him and withdrawn his mind that he had become forgetful, and that he could not take his examinations. He was behaving “abnormally”, roaming around the streets of the village but was unable to control it. “It was the spirits that was making me do it, and could even put thoughts into my mind, which are foreign to ...

Female sticklebacks use male coloration in mate choice and hence avoid parasitized males

Science.gov (United States)

Milinski, Manfred; Bakker, Theo C. M.

1990-03-01

AN important problem in evolutionary biology since the time of Darwin has been to understand why females preferentially mate with males handicapped by secondary sexual ornaments1-3. One hypothesis of sexual selection theory is that these ornaments reliably reveal the male's condition4-6, which can be affected for example by parasites4,7-13. Here we show that in the three-spined stickleback (Gasterosteus aculeatus) the intensity of male red breeding coloration positively correlates with physical condition. Gravid females base their active mate choice on the intensity of the male's red coloration. Choice experiments under green light prevent the use of red colour cues by females, and males that were previously preferred are now chosen no more than randomly, although the courtship behaviour of the males remains unchanged. Parasitieation causes a deterioration in the males' condition and a decrease in the intensity of their red coloration. Tests under both lighting conditions reveal that the females recognize the formerly parasitized males by the lower intensity of their breeding coloration. Female sticklebacks possibly select a male with a good capacity for paternal care14 but if there is additive genetic variation for parasite resistance, then they might also select for resistance genes, as proposed by Hamilton and Zuk4.

Male-Male Mounting Behaviour in Free-Ranging Golden Snub-Nosed Monkeys (Rhinopithecus roxellana).

Science.gov (United States)

Fang, Gu; Dixson, Alan F; Qi, Xiao-Guang; Li, Bao-Guo

2018-01-01

An all-male band of golden snub-nosed monkeys (Rhinopithecus roxellana) was observed for 3 months in the Qinling Mountains of China, in order to collect data on the frequencies and contextual significance of male-male mounting behaviour. Mounts occurred in a variety of affiliative, dominance-related and sexual contexts, which differed depending upon the ages of the males involved. Mounting behaviour in this group was mainly initiated by adults. Juveniles mounted each other in affiliative contexts (during play and prior to grooming). Adult males mounted subadult and juvenile partners in a greater variety of sociosexual contexts (dominance/rank-related interactions; reconciliation following agonistic encounters, and sometimes as a prelude to receiving grooming). However, subadults and juveniles were never observed to mount adults. In one dyad, involving an adult male and a subadult partner, mounting was more frequent and prolonged, and included bouts of deep pelvic thrusting. Two mounts resulted in anal intromissions and, in 1 case, the subadult partner exhibited seminal emission. Given that the study took place during the annual mating peak period of R. roxellana, it is possible that this unusual male-male sexual activity was related to the absence of mating opportunities for those adults that were excluded from 1-male units. © 2018 S. Karger AG, Basel.

[Dental and health law 4. The treatment of minors and of adults who are unable to give informed consent].

Science.gov (United States)

Brands, W G; van der Ven, J M; Brands-Bottema, G W

2013-01-01

When minors are treated, a complex triangular relationship can emerge among dentist, patient and the individual legally responsible for the patient. Generally speaking, both parents are those legally responsible for a child. This might not be the case if the parents are not married to each other or have divorced, or when there is a question of a child protection ruling. The governing rule is that dentists are required to honour the obligations to the legal representatives thatfollow from the patients' rights concerning the treatment of children under the age of 12. In the case of patients between the ages of 12 and 16, dentists are required to act in accordance with their obligations to both those legally responsible and to the patients. Finally, in the case ofpatients who are 16 and older, dentists are required to act only in accordance with their obligations to the patients. There are, however, various exceptions to this governing rule. One of the most common examples is the patient who is a minor of 16 or older who is unable to determine what is in his own best interest. That criterium is also used in determining the capability to give informed consent in adults.

Computer-assisted operational planning for pediatric abdominal surgery. 3D-visualized MRI with volume rendering; Die computerassistierte Operationsplanung in der Abdominalchirurgie des Kindes. 3D-Visualisierung mittels ''volume rendering'' in der MRT

Energy Technology Data Exchange (ETDEWEB)

Guenther, P.; Holland-Cunz, S.; Waag, K.L. [Universitaetsklinikum Heidelberg (Germany). Kinderchirurgie; Troeger, J. [Universitaetsklinikum Heidelberg, (Germany). Paediatrische Radiologie; Schenk, J.P. [Universitaetsklinikum Heidelberg, (Germany). Paediatrische Radiologie; Universitaetsklinikum, Paediatrische Radiologie, Heidelberg (Germany)

2006-08-15

Exact surgical planning is necessary for complex operations of pathological changes in anatomical structures of the pediatric abdomen. 3D visualization and computer-assisted operational planning based on CT data are being increasingly used for difficult operations in adults. To minimize radiation exposure and for better soft tissue contrast, sonography and MRI are the preferred diagnostic methods in pediatric patients. Because of manifold difficulties 3D visualization of these MRI data has not been realized so far, even though the field of embryonal malformations and tumors could benefit from this. A newly developed and modified raycasting-based powerful 3D volume rendering software (VG Studio Max 1.2) for the planning of pediatric abdominal surgery is presented. With the help of specifically developed algorithms, a useful surgical planning system is demonstrated. Thanks to the easy handling and high-quality visualization with enormous gain of information, the presented system is now an established part of routine surgical planning. (orig.) [German] Komplexe Operationen bei ausgepraegten pathologischen Veraenderungen anatomischer Strukturen des kindlichen Abdomens benoetigen eine exakte Operationsvorbereitung. 3D-Visualisierung und computerassistierte Operationsplanung anhand von CT-Daten finden fuer schwierige chirurgische Eingriffe bei Erwachsenen in zunehmendem Masse Anwendung. Aus strahlenhygienischen Gruenden und bei besserer Weichteildifferenzierung ist jedoch neben der Sonographie die Magnetresonanztomographie (MRT) bei Kindern das Diagnostikum der Wahl. Die 3D-Visualisierung dieser MRT-Daten ist dabei jedoch aufgrund vielfaeltiger Schwierigkeiten bisher nicht durchgefuehrt worden, obwohl sich das Gebiet embryonaler Fehlbildungen und Tumoren geradezu anbietet. Vorgestellt wird eine weiterentwickelte und an die Fragestellungen der abdominellen Kinderchirurgie angepasste, sehr leistungsstarke raycastingbasierte 3D-volume-rendering-Software (VG Studio Max 1

Technical analysis of volume-rendering algorithms: application in low-contrast structures using liver vascularisation as a model

International Nuclear Information System (INIS)

Cademartiri, Filippo; Luccichenti, Giacomo; Runza, Giuseppe; Bartolotta, Tommaso Vincenzo; Midiri, Massimo; Gualerzi, Massimo; Brambilla, Lorenzo; Coruzzi, Paolo; Soliani, Paolo; Sianesi, Mario

2005-01-01

Purpose: To assess the influence of pre-set volume rendering opacity curves (OC) on image quality and to identify which absolute parameters (density of aorta, hepatic parenchyma and portal vein) affect visualization of portal vascular structures (low-contrast structures). Materials and methods: Twenty-two patients underwent a dual-phase spiral CT with the following parameters: collimation 3 mm, pitch 2, increment 1 mm. Three scans were performed: one without contrast medium and the latter two after the injection of contrast material (conventionally identified as 'arterial' and 'portal'). The images were sent to a workstation running on an NT platform equipped with post-processing software allowing three-dimensional (3D) reconstructions to generate volume-rendered images of the vascular supply to the liver. Correlation between the absolute values of aorta, liver and portal vein density, OC parameters, and image quality were assessed. Results: 3D images generated using pre-set OC obtained a much mower overall quality score than those produced with OC set by the operator. High contrast between the liver and the portal vein, for example during the portal vascular phase, allows wider windows, thus improving image quality. Conversely, the OC in the parenchymal phase scans must have a high gradient in order to better differentiate between the vascular structures and the surrounding hepatic parenchyma. Conclusions: Image features considered to be of interest by the operator cannot be simplified by the mean of pre-set OC. Due to their strong individual variability automatic 3D algorithms cannot be universally applied: they should be adapted to both image and patient characteristics [it

A novel fermentation strategy for removing the key inhibitor acetic acid and efficiently utilizing the mixed sugars from lignocellulosic hydrolysates

Energy Technology Data Exchange (ETDEWEB)

Mark A. Eiteman PHD; Elliot Altman Phd

2009-02-11

As part of preliminary research efforts, we have completed several experiments which demonstrate 'proof of concept.' These experiments addressed the following three questions: (1) Can a synthetic mixed sugar solution of glucose and xylose be efficiently consumed using the multi-organism approach? (2) Can this approach be used to accumulate a model product? (3) Can this approach be applied to the removal of an inhibitor, acetate, selectively from mixtures of xylose and glucose? To answer the question of whether this multi-organism approach can effectively consume synthetic mixed sugar solutions, we first tested substrate-selective uptake using two strains, one unable to consume glucose and one unable to consume xylose. The xylose-selective strain ALS998 has mutations in the three genes involved in glucose uptake, rendering it unable to consume glucose: ptsG codes for the Enzyme IICB{sup Glc} of the phosphotransferase system (PTS) for carbohydrate transport (Postma et al., 1993), manZ codes for the IID{sup Man} domain of the mannose PTS permease (Huber, 1996), glk codes for glucokinase (Curtis and Epstein 1975) We also constructed strain ALS1008 which has a knockout in the xylA gene encoding for xylose isomerase, rendering ALS1008 unable to consume xylose. Two batch experiments and one continuous bioprocess were completed. In the first experiment, each strain was grown separately in a defined medium of 8 g/L xylose and 15 g/L glucose which represented xylose and glucose concentrations that can be generated by actual biomass. In the second experiment, the two strains were grown together in batch in the same defined, mixed-sugar medium. In a third experiment, we grew the strains continuously in a 'chemostat', except that we shifted the concentrations of glucose and xylose periodically to observe how the system would respond. (For example, we shifted the glucose concentration suddenly from 15 g/L to 30 g/L in the feed).

Heterosexual men's anger in response to male homosexuality: effects of erotic and non-erotic depictions of male-male intimacy and sexual prejudice.

Science.gov (United States)

Hudepohl, Adam D; Parrott, Dominic J; Zeichner, Amos

2010-01-01

The present study compared effects of erotic and non-erotic depictions of male-male intimacy on the experience of anger in heterosexual men. Data came from three independent laboratory studies designed to elicit anger in response to erotic or non-erotic depictions of male-male and male-female intimacy. All participants completed a measure of sexual prejudice and anger was assessed before and after viewing the erotic or non-erotic video. Among high-prejudiced men, viewing erotic and non-erotic intimate behavior between two men elicited significant increases in anger relative to viewing comparable behavior between a male-female dyad. In contrast, among low-prejudiced men, viewing erotic, but not non-erotic, intimate behavior between two men elicited significant increases in anger relative to viewing comparable behavior between a male-female dyad. Implications for understanding heterosexual men's anger, and aggression, toward gay men were discussed.

Heterosexual Men's Anger in Response to Male Homosexuality: Effects of Erotic and Non-Erotic Depictions of Male-Male Intimacy and Sexual Prejudice

Science.gov (United States)

Hudepohl, Adam D.; Parrott, Dominic J.; Zeichner, Amos

2010-01-01

The present study compared effects of erotic and non-erotic depictions of male-male intimacy on the experience of anger in heterosexual men. Data came from three independent laboratory studies designed to elicit anger in response to erotic or non-erotic depictions of male-male and male-female intimacy. All participants completed a measure of sexual prejudice and anger was assessed before and after viewing the erotic or non-erotic video. Among high-prejudiced men, viewing erotic and non-erotic intimate behavior between two men elicited significant increases in anger relative to viewing comparable behavior between a male-female dyad. In contrast, among low-prejudiced men, viewing erotic, but not non-erotic, intimate behavior between two men elicited significant increases in anger relative to viewing comparable behavior between a male-female dyad. Implications for understanding heterosexual men's anger, and aggression, toward gay men were discussed. PMID:20818528

Male depression in females?

Science.gov (United States)

Möller-Leimkühler, Anne Maria; Yücel, Mete

2010-02-01

Scientific evidence for a male-typed depression ("male depression") is still limited, but mainly supports this concept with respect to single externalizing symptoms or symptom clusters. In particular, studies on non-clinical populations including males and females are lacking. The present study aims at assessing general well-being, the risk and the symptoms of male depression dependent on biological sex and gender-role orientation on instrumental (masculine) and expressive (feminine) personality traits in an unselected community sample of males and females. Students (518 males, 500 females) of the Ludwig-Maximilians-University of Munich, Germany, were asked to participate in a "stress study" and complete the following self-report questionnaires: the WHO-5 Well-being Index [Bech, P., 1998. Quality of Life in the Psychiatric Patient. Mosby-Wolfe, London], the Gotland Scale for Male Depression [Walinder, J., Rutz, W., 2001. Male depression and suicide. International Clinical Psychopharmacology 16 (suppl 2), 21-24] and the German Extended Personal Attribute Questionnaire [Runge, T.E., Frey, D., Gollwitzer, P.M., et al., 1981. Masculine (instrumental) and feminine (expressive) traits. A comparison between students in the United States and West Germany. Journal of Cross-Cultural Psychology 12, 142-162]. General well-being of the students was significantly lower compared to population norms. Contrary to expectations, female students had a greater risk of male depression than male students (28.9% vs. 22.4%; p<0.05). Overall, prototypic depressive symptoms as well as externalizing symptoms were more pronounced in females. In the subgroup of those at risk for male depression, biological sex and kind of symptoms were unrelated. Principal component analyses revealed a similar symptom structure for males and females. Low scores on masculinity/instrumentality significantly predicted higher risk of male depression, independent of biological sex. The study sample is not

Male Body Practices.

Science.gov (United States)

Lefkowich, Maya; Oliffe, John L; Hurd Clarke, Laura; Hannan-Leith, Madeline

2017-03-01

The pressure on boys and men to engage in extensive body practices (e.g., closely monitored eating and exercise habits) and achieve ideal male bodies has grown significantly over the past 20 years. Central to the depiction of ideal male bodies and body practices are both the pursuit and achievement of lean and well-defined muscles. The labels "pitches," "purchases," and "performativities" were inductively derived from the literature, and used to describe the multifaceted connections between masculinities, muscularity, and idealized male body practices. "Pitches" distil how popular culture posture norms of masculinity, and manly bodies and behaviors attainable and necessary. "Purchases" refer to men's diverse buy-in to dominant discourses about acceptable male bodies and practices. "Performativities" chronicle how men embody and navigate gender norms as they evaluate their own bodies, behaviors, and eating habits and those of their peers. Based on findings from the current scoping review, future research could benefit from fully linking masculinities with the drive for muscularity to address health and social risks associated with the pursuit of the idealized male body. In highlighting the plurality of masculinities and the complexity of men's diverse identities, health care providers can better reach and support men. Focusing on, and celebrating, a wider range of male bodies could help recenter dominant discourses about how and whose bodies and experiences are idealized. The current scoping review article offers an overview of how masculinities and muscularity have been linked to male body practices, and recommendations to advance this emergent field.

Photorealistic lighting and rendering of a small apartment interior : a case study with 3DS Max and V-Ray

OpenAIRE

Kämä, Antti

2016-01-01

The purpose of this thesis was to examine the process of creating photorealistic lighting for a small apartment interior and the process of rendering that interior. Both nighttime and daytime lighting was created for the 3D interior scene modeled beforehand. The 3D interior scene was comprised the walls, windows and the largest furniture of the apartment excluding the bathroom. The theoretical section of the thesis focuses on different settings and features which in combination influence...

[Acceptability of male circumcision among male miners in Baise of Guangxi].

Science.gov (United States)

Luo, Hao; Liang, Xu; Chen, Jian; Yang, Xiao-bo; Jiang, Jun-jun; Deng, Wei; Zou, Yun-feng; Wei, Bo; Zhang, Zhi-yong; Liu, Zhi-hao; Liang, Hao

2011-06-01

To investigate the acceptability of male circumcision among male miners in Baise, Guangxi, China. A questionnaire-based survey on the willingness to be circumcised (WTC) and its influential factors were conducted among Guangxi male miners recruited by random cluster sampling. Of 569 subjects who were surveyed, 143 (25.13%) expressed their willingness to be circumcised. Univariate analysis showed that marital status, education level, and the awareness of the hazards of phimosis and redundant prepuce and reasons for circumcision were significantly different between WTC group and the non-WTC group (all Pminers WTC. Male miners in this area have low WTC. Education on the basic knowledge of acquired immunodeficiency syndrome and circumcision may help promote the application of circumcision.

Predicting the long-term durability of hemp-lime renders in inland and coastal areas using Mediterranean, Tropical and Semi-arid climatic simulations.

Science.gov (United States)

Arizzi, Anna; Viles, Heather; Martín-Sanchez, Inés; Cultrone, Giuseppe

2016-01-15

Hemp-based composites are eco-friendly building materials as they improve energy efficiency in buildings and entail low waste production and pollutant emissions during their manufacturing process. Nevertheless, the organic nature of hemp enhances the bio-receptivity of the material, with likely negative consequences for its long-term performance in the building. The main purpose of this study was to study the response at macro- and micro-scale of hemp-lime renders subjected to weathering simulations in an environmental cabinet (one year was condensed in twelve days), so as to predict their long-term durability in coastal and inland areas with Mediterranean, Tropical and Semi-arid climates, also in relation with the lime type used. The simulated climatic conditions caused almost unnoticeable mass, volume and colour changes in hemp-lime renders. No efflorescence or physical breakdown was detected in samples subjected to NaCl, because the salt mainly precipitates on the surface of samples and is washed away by the rain. Although there was no visible microbial colonisation, alkaliphilic fungi (mainly Penicillium and Aspergillus) and bacteria (mainly Bacillus and Micrococcus) were isolated in all samples. Microbial growth and diversification were higher under Tropical climate, due to heavier rainfall. The influence of the bacterial activity on the hardening of samples has also been discussed here and related with the formation and stabilisation of vaterite in hemp-lime mixes. This study has demonstrated that hemp-lime renders show good durability towards a wide range of environmental conditions and factors. However, it might be useful to take some specific preventive and maintenance measures to reduce the bio-receptivity of this material, thus ensuring a longer durability on site. Copyright © 2015 Elsevier B.V. All rights reserved.

Postnatal nutrition influences male attractiveness and promotes plasticity in male mating preferences

Science.gov (United States)

Noguera, José C.; Metcalfe, Neil B.; Monaghan, Pat

2017-12-01

Poor early-life nutrition could reduce adult reproductive success by negatively affecting traits linked to sexual attractiveness such as song complexity. If so, this might favor strategic mate choice, allowing males with less complex songs to tailor their mating tactics to maximize the reproductive benefits. However, this possibility has been ignored in theoretical and empirical studies. By manipulating the micronutrient content of the diet (e.g., low or high) during the postnatal period of male zebra finches, we show for the first time (1) that males reared on a poor (low) micronutrient diet had less complex songs as adults; (2) that these males, in contrast to the high micronutrient diet group, were more selective in their mating strategies, discriminating against those females most likely to reduce their clutch size when paired with males having less complex songs; and (3) that by following different mating strategies, males reared on the contrasting diets obtained similar reproductive benefits. These results suggest that early-life dietary conditions can induce multiple and long-lasting effects on male and female reproductive traits. Moreover, the results seem to reflect a previously unreported case of adaptive plasticity in mate choice in response to a nutritionally mediated reduction in sexual attractiveness.

Promotores��� perspectives on a male-to-male peer network

OpenAIRE

Macia, Laura; Ruiz, Hector Camilo; Boyzo, Roberto; Documet, Patricia Isabel

2016-01-01

Little documentation exists about male community health workers (promotores) networks. The experiences of promotores can provide input on how to attract, train, supervise and maintain male promotores in CHW programs. We present the experience and perspectives of promotores who participated in a male promotores network assisting Latino immigrant men in an emerging Latino community. All promotores in this community-based participatory study received payment for work 10 hours a week. We conducte...

Prostatitis and male infertility.

Science.gov (United States)

Alshahrani, Saad; McGill, John; Agarwal, Ashok

2013-11-01

The prostate gland plays an important role in male reproduction. Inflammation of the prostate gland (prostatitis) is a common health problem affecting many young and middle aged men. Prostatitis is considered a correctable cause of male infertility, but the pathophysiology and appropriate treatment options of prostatitis in male infertility remain unclear. This literature review will focus on current data regarding prostatitis and its impact on male infertility. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

Decreased panicle-derived indole-3-acetic acid reduces gibberellin A1 level in the uppermost internode, causing panicle enclosure in male sterile rice Zhenshan 97A.

Science.gov (United States)

Yin, Changxi; Gan, Lijun; Ng, Denny; Zhou, Xie; Xia, Kai

2007-01-01

Cytoplasmic male sterile (CMS) rice Zhenshan 97A (ZS97A) has been widely used in hybrid rice production in China. However, ZS97A suffers from serious panicle enclosure, which blocks normal pollination and greatly reduces seed production of hybrid rice. Little is known about the cause of panicle closure in ZS97A. In this study, it was found that the occurrence of cytoplasmic male sterility caused a deficiency of indole-3-acetic acid (IAA) in ZS97A panicles, and less IAA was provided to the uppermost internode (UI). Further, it was found that the decreased panicle-derived IAA caused a gibberellin A(1) (GA(1)) deficiency in the UI by the down-regulation of OsGA3ox2 transcript level. Reduced GA(1) level in the UI led to decreases of both cell number and cell elongation, resulting in a shortened UI. The shortened UI was unable to push the panicle out of the flag leaf sheath that remained normal, which resulted in panicle enclosure in ZS97A. These findings suggest that decreased panicle-derived IAA reduces the GA(1) level in the UI, causing panicle enclosure in CMS rice ZS97A.

Free-ranging male koalas use size-related variation in formant frequencies to assess rival males.

Directory of Open Access Journals (Sweden)

Benjamin D Charlton

Full Text Available Although the use of formant frequencies in nonhuman animal vocal communication systems has received considerable recent interest, only a few studies have examined the importance of these acoustic cues to body size during intra-sexual competition between males. Here we used playback experiments to present free-ranging male koalas with re-synthesised bellow vocalisations in which the formants were shifted to simulate either a large or a small adult male. We found that male looking responses did not differ according to the size variant condition played back. In contrast, male koalas produced longer bellows and spent more time bellowing when they were presented with playbacks simulating larger rivals. In addition, males were significantly slower to respond to this class of playback stimuli than they were to bellows simulating small males. Our results indicate that male koalas invest more effort into their vocal responses when they are presented with bellows that have lower formants indicative of larger rivals, but also show that males are slower to engage in vocal exchanges with larger males that represent more dangerous rivals. By demonstrating that male koalas use formants to assess rivals during the breeding season we have provided evidence that male-male competition constitutes an important selection pressure for broadcasting and attending to size-related formant information in this species. Further empirical studies should investigate the extent to which the use of formants during intra-sexual competition is widespread throughout mammals.

Self catheterization - male

Science.gov (United States)

... male; CIC - male Images Catheterization References Davis JE, Silverman MA. Urologic procedures. In: Roberts JR, ed. Roberts ... provided by VeriMed Healthcare Network. Also reviewed by David Zieve, MD, MHA, Medical Director, Brenda Conaway, Editorial ...

Red carbon dots-based phosphors for white light-emitting diodes with color rendering index of 92.

Science.gov (United States)

Zhai, Yuechen; Wang, Yi; Li, Di; Zhou, Ding; Jing, Pengtao; Shen, Dezhen; Qu, Songnan

2018-05-29

Exploration of solid-state efficient red emissive carbon dots (CDs) phosphors is strongly desired for the development of high performance CDs-based white light-emitting diodes (WLEDs). In this work, enhanced red emissive CDs-based phosphors with photoluminescence quantum yields (PLQYs) of 25% were prepared by embedding red emissive CDs (PLQYs of 23%) into polyvinyl pyrrolidone (PVP). Because of the protection of PVP, the phosphors could preserve strong luminescence under long-term UV excitation or being mixed with conventional packaging materials. By applying the red emissive phosphors as the color conversion layer, WLEDs with high color rendering index of 92 and color coordinate of (0.33, 0.33) are fabricated. Copyright © 2018 Elsevier Inc. All rights reserved.

Male contraception

OpenAIRE

Mathew, Vivek; Bantwal, Ganapathi

2012-01-01

Contraception is an accepted route for the control of population explosion in the world. Traditionally hormonal contraceptive methods have focused on women. Male contraception by means of hormonal and non hormonal methods is an attractive alternative. Hormonal methods of contraception using testosterone have shown good results. Non hormonal reversible methods of male contraception like reversible inhibition of sperm under guidanceare very promising. In this article we have reviewed the curren...

Sneaker "jack" males outcompete dominant "hooknose" males under sperm competition in Chinook salmon (Oncorhynchus tshawytscha).

Science.gov (United States)

Young, Brent; Conti, David V; Dean, Matthew D

2013-12-01

In a variety of taxa, males deploy alternative reproductive tactics to secure fertilizations. In many species, small "sneaker" males attempt to steal fertilizations while avoiding encounters with larger, more aggressive, dominant males. Sneaker males usually face a number of disadvantages, including reduced access to females and the higher likelihood that upon ejaculation, their sperm face competition from other males. Nevertheless, sneaker males represent an evolutionarily stable strategy under a wide range of conditions. Game theory suggests that sneaker males compensate for these disadvantages by investing disproportionately in spermatogenesis, by producing more sperm per unit body mass (the "fair raffle") and/or by producing higher quality sperm (the "loaded raffle"). Here, we test these models by competing sperm from sneaker "jack" males against sperm from dominant "hooknose" males in Chinook salmon. Using two complementary approaches, we reject the fair raffle in favor of the loaded raffle and estimate that jack males were ∼1.35 times as likely as hooknose males to fertilize eggs under controlled competitive conditions. Interestingly, the direction and magnitude of this skew in paternity shifted according to individual female egg donors, suggesting cryptic female choice could moderate the outcomes of sperm competition in this externally fertilizing species.

Early Resumption of Sex following Voluntary Medical Male Circumcision amongst School-Going Males.

Directory of Open Access Journals (Sweden)

Gavin George

Full Text Available Voluntary medical male circumcision is an integral part of the South African government's response to the HIV and AIDS epidemic. Following circumcision, it is recommended that patients abstain from sexual activity for six weeks, as sex may increase the risk of female-to-male HIV transmission and prolong the healing period. This paper investigates the resumption of sexual activity during the healing period among a cohort of school-going males in the KwaZulu-Natal province of South Africa. The analysis for this paper compares two groups of sexually active school-going males: the first group reported having sex during the healing period (n = 40 and the second group (n = 98 reported no sex during the healing period (mean age: 17.7, SD: 1.7.The results show that 29% (n = 40 of young males (mean age: 17.9, SD: 1.8 who were previously sexually active, resumed sexual activity during the healing period, had on average two partners and used condoms inconsistently. In addition, those males that engage in sexual activity during the healing period were less inclined to practice safe sex in the future (AOR = 0.055, p = 0.002 than the group of males who reported no sex during the healing period. These findings suggest that a significant proportion of young males may currently and in the future, subject themselves to high levels of risk for contracting HIV post circumcision. Education, as part of a VMMC campaign, must emphasize the high risk of HIV transmission for both the males their partners during the healing period.

Will male advertisement be a reliable indicator of paternal care, if offspring survival depends on male care?

Science.gov (United States)

Kelly, Natasha B; Alonzo, Suzanne H

2009-09-07

Existing theory predicts that male signalling can be an unreliable indicator of paternal care, but assumes that males with high levels of mating success can have high current reproductive success, without providing any parental care. As a result, this theory does not hold for the many species where offspring survival depends on male parental care. We modelled male allocation of resources between advertisement and care for species with male care where males vary in quality, and the effect of care and advertisement on male fitness is multiplicative rather than additive. Our model predicts that males will allocate proportionally more of their resources to whichever trait (advertisement or paternal care) is more fitness limiting. In contrast to previous theory, we find that male advertisement is always a reliable indicator of paternal care and male phenotypic quality (e.g. males with higher levels of advertisement never allocate less to care than males with lower levels of advertisement). Our model shows that the predicted pattern of male allocation and the reliability of male signalling depend very strongly on whether paternal care is assumed to be necessary for offspring survival and how male care affects offspring survival and male fitness.

[Male urinary incontinence

NARCIS (Netherlands)

Boer, T.A. de; Heesakkers, J.P.F.A.

2008-01-01

*Urinary incontinence in males is gaining increasingly more attention. *Male urinary incontinence can be classified as storage incontinence due to overactive bladder syndrome or stress incontinence due to urethral sphincter dysfunction. *Most patients benefit from the currently available treatment

Male breast cancer

DEFF Research Database (Denmark)

Lautrup, Marianne D; Thorup, Signe S; Jensen, Vibeke

2018-01-01

OBJECTIVE: Describe prognostic parameters of Danish male breast cancer patients (MBCP) diagnosed from 1980-2009. Determine all-cause mortality compared to the general male population and analyze survival/mortality compared with Danish female breast cancer patients (FBCP) in the same period...

One-Step Preparation of Blue-Emitting (La,Ca)Si3(O,N)5:Ce3+ Phosphors for High-Color Rendering White Light-Emitting Diodes

Science.gov (United States)

Yaguchi, Atsuro; Suehiro, Takayuki; Sato, Tsugio; Hirosaki, Naoto

2011-02-01

Highly phase-pure (La,Ca)Si3(O,N)5:Ce3+ blue-emitting phosphors were successfully synthesized via the one-step solid-state reaction from the system La2O3-CaO-CeO2-Si3N4. The synthesized (La,Ca)Si3(O,N)5:Ce3+ exhibits tunable blue broadband emission with the dominant wavelength of 466-479 nm and the external quantum efficiency up to ˜45% under 380 nm near-UV (NUV) excitation. Spectral simulations of the trichromatic white light-emitting diodes (LEDs) using (La,Ca)Si3(O,N)5:Ce3+ demonstrated markedly higher color rendering index Ra values of 93-95, compared to 76-90 attained by the systems using a conventional BAM:Eu2+ phosphor or InGaN blue LED. The present achievement indicates the promising applicability of (La,Ca)Si3(O,N)5:Ce3+ as a blue luminescent source for NUV-converting high-color rendering white LEDs.

Sexually selected nest-building--Pomatoschistus minutus males build smaller nest-openings in the presence of sneaker males.

Science.gov (United States)

Svensson, O; Kvarnemo, C

2003-09-01

Both natural selection and sexual selection may act on nest-building. We tested experimentally how different regimes of egg-predation and male-male competition influence nest-building before mating, using the marine fish sand goby, Pomatoschistus minutus. Males with sneaker males present built the smallest nest-openings, smaller than males held alone or with Pomatoschistus microps males (which may predate eggs and compete over nest-sites but not compete over fertilizations). Males with visual access to other nest-building males tended also to build smaller openings than males held alone or with P. microps. Males with egg-predators present built nests with openings not differing significantly from any other treatment. Our results indicate that the small nest-openings found in the sneaker male treatment are sexually selected through protection against sneaking or by female choice. Across treatments, time span before a male started to build his nest also explained variation in nest-opening width; males starting late built larger nest-openings.

Diploid male dynamics under different numbers of sexual alleles and male dispersal abilities.

Science.gov (United States)

Faria, Luiz R R; Soares, Elaine Della Giustina; Carmo, Eduardo do; Oliveira, Paulo Murilo Castro de

2016-09-01

Insects in the order Hymenoptera (bees, wasps and ants) present an haplodiploid system of sexual determination in which fertilized eggs become females and unfertilized eggs males. Under single locus complementary sex-determination (sl-CSD) system, the sex of a specimen depends on the alleles at a single locus: when diploid, an individual will be a female if heterozygous and male if homozygous. Significant diploid male (DM) production may drive a population to an extinction scenario called "diploid male vortex". We aimed at studying the dynamics of populations of a sl-CSD organism under several combinations of two parameters: male flight abilities and number of sexual alleles. In these simulations, we evaluated the frequency of DM and a genetic diversity measure over 10,000 generations. The number of sexual alleles varied from 10 to 100 and, at each generation, a male offspring might fly to another random site within a varying radius R. Two main results emerge from our simulations: (i) the number of DM depends more on male flight radius than on the number of alleles; (ii) in large geographic regions, the effect of males flight radius on the allelic diversity turns out much less pronounced than in small regions. In other words, small regions where inbreeding normally appears recover genetic diversity due to large flight radii. These results may be particularly relevant when considering the population dynamics of species with increasingly limited dispersal ability (e.g., forest-dependent species of euglossine bees in fragmented landscapes).

Factors affecting aggressive behaviour of spawning migratory males towards mature male parr in masu salmon Oncorhynchus masou.

Science.gov (United States)

Watanabe, M; Maekawa, K

2010-07-01

This study examined whether dominant migratory males (adopting fighter tactics) of the masu salmon Oncorhynchus masou would more aggressively attack large mature male parr (adopting sneaker tactics) as large mature male parr are expected to have the potential to cause a greater decrease in fertilization success. The frequency of aggressive behaviour was not related to the body size of males, and it increased with the frequency of interactions with mature male parr. The fertilization success of mature male parr was much lower than migratory males, and no relationship was observed between fertilization success and aggressive behaviour. The low fertilization success of mature male parr, despite infrequent aggressive behaviour by migratory males, indicates that there might be little benefit for migratory males to attack mature male parr more aggressively according to their body size.

Varicocele and male infertility

DEFF Research Database (Denmark)

Jensen, Christian Fuglesang S.; Østergren, Peter; Dupree, James M.

2017-01-01

The link between varicoceles and male infertility has been a matter of debate for more than half a century. Varicocele is considered the most common correctable cause of male infertility, but some men with varicoceles are able to father children, even without intervention. In addition, improvements...... if the male partner has a clinically palpable varicocele and affected semen parameters....

Metals for bone implants. Part 1. Powder metallurgy and implant rendering.

Science.gov (United States)

Andani, Mohsen Taheri; Shayesteh Moghaddam, Narges; Haberland, Christoph; Dean, David; Miller, Michael J; Elahinia, Mohammad

2014-10-01

New metal alloys and metal fabrication strategies are likely to benefit future skeletal implant strategies. These metals and fabrication strategies were looked at from the point of view of standard-of-care implants for the mandible. These implants are used as part of the treatment for segmental resection due to oropharyngeal cancer, injury or correction of deformity due to pathology or congenital defect. The focus of this two-part review is the issues associated with the failure of existing mandibular implants that are due to mismatched material properties. Potential directions for future research are also studied. To mitigate these issues, the use of low-stiffness metallic alloys has been highlighted. To this end, the development, processing and biocompatibility of superelastic NiTi as well as resorbable magnesium-based alloys are discussed. Additionally, engineered porosity is reviewed as it can be an effective way of matching the stiffness of an implant with the surrounding tissue. These porosities and the overall geometry of the implant can be optimized for strain transduction and with a tailored stiffness profile. Rendering patient-specific, site-specific, morphology-specific and function-specific implants can now be achieved using these and other metals with bone-like material properties by additive manufacturing. The biocompatibility of implants prepared from superelastic and resorbable alloys is also reviewed. Copyright © 2014 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Male depression and suicide.

Science.gov (United States)

Wålinder, J; Rutzt, W

2001-03-01

Based on the experiences of the Gotland Study that education of general practitioners about depressive illness resulted in a statistically significant reduction in the number of female suicides, leaving the rate of male suicides almost unaffected, we propose the concept of a male depressive syndrome. This syndrome comprises a low stress tolerance, an acting-out behavior, a low impulse control, substance abuse and a hereditary loading of depressive illness, alcoholism and suicide. This notion is supported by data from The Amish study as well as the concept of van Praag of a stress-precipitated, cortisol-induced, serotonin-related and anxiety-driven depressive illness most often seen in males. In order to identify depressed males, the Gotland Male Depression Scale has been developed. Some preliminary data using the scale in a group of alcohol-dependant patients are presented.

Early-Life Social Isolation Influences Mouse Ultrasonic Vocalizations during Male-Male Social Encounters.

Science.gov (United States)

Keesom, Sarah M; Finton, Caitlyn J; Sell, Gabrielle L; Hurley, Laura M

2017-01-01

Early-life social isolation has profound effects on adult social competence. This is often expressed as increased aggression or inappropriate displays of courtship-related behaviors. The social incompetence exhibited by isolated animals could be in part due to an altered ability to participate in communicatory exchanges. House mice (Mus musculus) present an excellent model for exploring this idea, because social isolation has a well-established influence on their social behavior, and mice engage in communication via multiple sensory modalities. Here, we tested the prediction that social isolation during early life would influence ultrasonic vocalizations (USVs) emitted by adult male mice during same-sex social encounters. Starting at three weeks of age, male mice were housed individually or in social groups of four males for five weeks, after which they were placed in one of three types of paired social encounters. Pair types consisted of: two individually housed males, two socially housed males, or an individually housed and a socially housed male ("mixed" pairs). Vocal behavior (USVs) and non-vocal behaviors were recorded from these 15-minute social interactions. Pairs of mice consisting of at least one individually housed male emitted more and longer USVs, with a greater proportional use of USVs containing frequency jumps and 50-kHz components. Individually housed males in the mixed social pairs exhibited increased levels of mounting behavior towards the socially housed males. Mounting in these pairs was positively correlated with increased number and duration of USVs as well as increased proportional use of spectrally more complex USVs. These findings demonstrate that USVs are part of the suite of social behaviors influenced by early-life social isolation, and suggest that altered vocal communication following isolation reflects reduced social competence.

Extraction by Dry Rendering Methode and Characterization Fish Oil of Catfish Viscera Fat by Product of Smooked Fish Processing

Directory of Open Access Journals (Sweden)

Kamini Kamini

2017-02-01

Full Text Available AbstractThe catfish viscera fat, is cathfish processing by-products, has potential to be used as a source of rawmaterial for production of fish oil. This study aimed to analyze the value of proximate, heavy metal contentand fatty acid profile of catfish viscera fat (Pangasius hypopthalmus and characterized fish oil extracted bydry rendering in various temperature and time than compared it to fish oil extracted by stove heating toobtain the best treatment. Proximate, heavy metal residue, and the fatty acid profile analysis were conductedfor characterizing catfish viscera fat. Fish oil extraction was conducted by dry rendering in varioustemperatures of 50, 60, 70, 80 °C for 1, 2, and 3 hours. Fish oil quality was determined by the chemicalcharacteristics i.e. PV, FFA, anisidin and TOTOX. The results of the study showed that fat content of catfishfat viscera was 88.19 %, the heavy metals content was below SNI standart to be consumed, and fatty acidprofile composition was SFA>MUFA>PUFA. The highest fatty acid content was oleic acid. The best fish oilquality was resulted on temperature extraction of 50°C for 2 hours with yield value, PV, FFA, anisidin, andTOTOX were 45.17 %, 2.77 meq/kg, 0.83 %, 2.86 meq/kg, 8.39 meq/kg respectively. This result was notsignificantly different with fish oil extracted by the stove heating expect for yield and PV were 80.11% and6.52 meq/kg, respectively.

In Adult Smokers Unwilling or Unable to Quit, Does Changing From Tobacco Cigarettes to Electronic Cigarettes Decrease the Incidence of Negative Health Effects Associated With Smoking Tobacco? A Clin-IQ

Directory of Open Access Journals (Sweden)

Jennifer Brown

2014-05-01

Full Text Available Data from a randomized controlled trial and systematic review support the claim that switching from tobacco cigarettes to electronic cigarettes (e-cigarettes can reduce the short-term negative health effects of smoking. In adult smokers unwilling or unable to quit, exhaled carbon monoxide levels, total number of cigarettes smoked, and exposure to nitrosamine chemicals were reduced within a 12-month period. While the e-cigarette industry remains largely unregulated thus far, these studies provide encouraging hope in the uphill battle toward helping patients make informed and healthy choices.

The Role of the Patrimonial Result Account in Rendering Performance in the Secondary Educational Institutions

Directory of Open Access Journals (Sweden)

Daniela Vitan

2016-01-01

Full Text Available Through its tools, in particular through patrimonial result account, accounting gives information about the performance in the secondary educational institutions and beyond. In the work ”Informational valence regarding the role of the patrimonial result account in rendering performance at secondary educational institutions” it is presented an analysis model of the performance in the pre-university education institutions based on the economic-financial indicators. These indicator simply an analysis of the dynamics and structure of revenues, costs, results and enable the knowledge of the resource management in order to cover expenses from the revenue, their evolution and their total balance. The analysis was based on hypothetical data over a period of two years, and after this period it was determined that the institution has managed to maintain its level of efficiency in resource management.

The agricultural contaminant 17β-trenbolone disrupts male-male competition in the guppy (Poecilia reticulata).

Science.gov (United States)

Tomkins, Patrick; Saaristo, Minna; Bertram, Michael G; Tomkins, Raymond B; Allinson, Mayumi; Wong, Bob B M

2017-11-01

Despite a growing literature highlighting the potential impact of human-induced environmental change on mechanisms of sexual selection, relatively little is known about the effects of chemical pollutants on male-male competition. One class of environmental pollutant likely to impact male competitive interactions is the endocrine-disrupting chemicals (EDCs), a large and heterogeneous group of chemical contaminants with the potential to influence morphology, physiology and behaviour at minute concentrations. One EDC of increasing concern is the synthetic, androgenic steroid 17β-trenbolone, which is used globally to promote growth in beef cattle. Although 17β-trenbolone has been found to cause severe morphological and behavioural abnormalities in fish, its potential impact on male-male competition has yet to be investigated. To address this, we exposed wild male guppies (Poecilia reticulata) to an environmentally realistic concentration of 17β-trenbolone (average measured concentration: 8 ng/L) for 21 days using a flow-through system. We found that, in the presence of a competitor, 17β-trenbolone-exposed males carried out more frequent aggressive behaviours towards rival males than did unexposed males, as well as performing less courting behaviour and more sneak (i.e., coercive) mating attempts towards females. Considering that, by influencing mating outcomes, male-male competition has important consequences for population dynamics and broader evolutionary processes, this study highlights the need for greater understanding of the potential impact of EDCs on the mechanisms of sexual selection. Crown Copyright © 2017. Published by Elsevier Ltd. All rights reserved.

Stages of Male Breast Cancer

Science.gov (United States)

... Breast & Gynecologic Cancers Breast Cancer Screening Research Male Breast Cancer Treatment (PDQ®)–Patient Version General Information about Male Breast Cancer Go to Health Professional Version Key Points Male ...

Demand for male contraception.

Science.gov (United States)

Dorman, Emily; Bishai, David

2012-10-01

The biological basis for male contraception was established decades ago, but despite promising breakthroughs and the financial burden men increasingly bear due to better enforcement of child support policies, no viable alternative to the condom has been brought to market. Men who wish to control their fertility must rely on female compliance with contraceptives, barrier methods, vasectomy or abstinence. Over the last 10 years, the pharmaceutical industry has abandoned most of its investment in the field, leaving only nonprofit organisations and public entities pursuing male contraception. Leading explanations are uncertain forecasts of market demand pitted against the need for critical investments to demonstrate the safety of existing candidate products. This paper explores the developments and challenges in male contraception research. We produce preliminary estimates of potential market size for a safe and effective male contraceptive based on available data to estimate the potential market for a novel male method.

Repeated Bout Effect Was More Expressed in Young Adult Males Than in Elderly Males and Boys

Directory of Open Access Journals (Sweden)

Giedrius Gorianovas

2013-01-01

Full Text Available This study investigated possible differences using the same stretch-shortening exercise (SSE protocol on generally accepted monitoring markers (dependent variables: changes in creatine kinase, muscle soreness, and voluntary and electrically evoked torque in males across three lifespan stages (childhood versus adulthood versus old age. The protocol consisted of 100 intermittent (30 s interval between jumps drop jumps to determine the repeated bout effect (RBE (first and second bouts performed at a 2-week interval. The results showed that indirect symptoms of exercise-induced muscle damage after SSE were more expressed in adult males than in boys and elderly males, suggesting that the muscles of boys and elderly males are more resistant to exercise-induced damage than those of adult males. RBE was more pronounced in adult males than in boys and elderly males, suggesting that the muscles of boys and elderly males are less adaptive to exercise-induced muscle damage than those of adult males.

Male mating biology

NARCIS (Netherlands)

Howell, Paul I.; Knols, Bart G. J.

2009-01-01

Before sterile mass-reared mosquitoes are released in an attempt to control local populations, many facets of male mating biology need to be elucidated. Large knowledge gaps exist in how both sexes meet in space and time, the correlation of male size and mating success and in which arenas matings

How Effective Is Male Contraception?

Science.gov (United States)

... Twitter Pinterest Email Print How effective is male contraception? Not all contraceptive methods are appropriate for all ... is best for them. For men, methods of contraception include male condoms and sterilization (vasectomy). Male condoms. ...

Seminal fluid enhances competitiveness of territorial males' sperm in a fish with alternative male reproductive tactics.

Science.gov (United States)

Poli, Federica; Locatello, Lisa; Rasotto, Maria B

2018-05-29

The most common adaptation to sperm competition in males is represented by an increase in the sperm number and/or quality released at mating, to raise their probability of egg fertilization. However, rapidly mounting evidence highlights that seminal fluid may directly influence the competitive fertilization success of a male by affecting either own and/or rival sperm performances. In the black goby, Gobius niger , an external fertilizer with guard-sneaker mating tactics and high sperm competition level, sneaker males' ejaculates contain less seminal fluid and more sperm, that are also of better quality, than those of territorial males. However, territorial males, gain a higher paternity success inside natural nests. Here, we ask whether the seminal fluid can contribute to territorial males' reproductive success by enhancing their sperm performances and/or by decreasing those of sneaker males. Using sperm and seminal fluid manipulation and in vitro fertilization tests, we found that own seminal fluid influences the velocity and fertilization ability of sperm only in territorial males, making them as faster as those of sneakers and with similar fertilization rate. Moreover, both sneaker and territorial males' sperm remain unaffected by the seminal fluid of rival males. Thus, black goby males respond to the different level of sperm competition faced by differently allocating in sperm and non-sperm components of the ejaculate, with sneakers primarily investing in sperm of intrinsic high quality and territorial males relying on the effect of seminal fluid to increase the lower intrinsic quality of their sperm. © 2018. Published by The Company of Biologists Ltd.

Sneaker “jack” males outcompete dominant “hooknose” males under sperm competition in Chinook salmon (Oncorhynchus tshawytscha)

OpenAIRE

Young, Brent; Conti, David V; Dean, Matthew D

2013-01-01

In a variety of taxa, males deploy alternative reproductive tactics to secure fertilizations. In many species, small “sneaker” males attempt to steal fertilizations while avoiding encounters with larger, more aggressive, dominant males. Sneaker males usually face a number of disadvantages, including reduced access to females and the higher likelihood that upon ejaculation, their sperm face competition from other males. Nevertheless, sneaker males represent an evolutionarily stable strategy un...

Hyperthyroidism and Hypothyroidism in Male Mice and Their Effects on Bone Mass, Bone Turnover, and the Wnt Inhibitors Sclerostin and Dickkopf-1.

Science.gov (United States)

Tsourdi, Elena; Rijntjes, Eddy; Köhrle, Josef; Hofbauer, Lorenz C; Rauner, Martina

2015-10-01

Thyroid hormones are key regulators of bone homeostasis, and Wnt signaling has been implicated in thyroid hormone-associated bone loss. Here we tested whether hyperthyroidism and hypothyroidism interfere with dickkopf-1 (DKK1) and sclerostin, two inhibitors of Wnt signaling. Twelve-week-old male C57BL/6 mice were rendered either hyperthyroid or hypothyroid. Hyperthyroid mice displayed decreased trabecular (-54%, P hyperthyroid mice and low bone turnover in hypothyroid mice. In vivo, serum DKK1 concentrations were decreased in hyperthyroid mice (-24%, P hyperthyroid mice (+50%, P hyperthyroid (P hyperthyroid but not in hypothyroid mice. Our data show that thyroid hormone-induced changes in bone remodeling are associated with a divergent regulation of DKK1 and sclerostin. Thus, the modulation of Wnt signaling by thyroid hormones may contribute to thyroid hormone-associated bone disease and altered expression of Wnt inhibitors may emerge as potential therapeutic targets.

New light field camera based on physical based rendering tracing

Science.gov (United States)

Chung, Ming-Han; Chang, Shan-Ching; Lee, Chih-Kung

2014-03-01

Even though light field technology was first invented more than 50 years ago, it did not gain popularity due to the limitation imposed by the computation technology. With the rapid advancement of computer technology over the last decade, the limitation has been uplifted and the light field technology quickly returns to the spotlight of the research stage. In this paper, PBRT (Physical Based Rendering Tracing) was introduced to overcome the limitation of using traditional optical simulation approach to study the light field camera technology. More specifically, traditional optical simulation approach can only present light energy distribution but typically lack the capability to present the pictures in realistic scenes. By using PBRT, which was developed to create virtual scenes, 4D light field information was obtained to conduct initial data analysis and calculation. This PBRT approach was also used to explore the light field data calculation potential in creating realistic photos. Furthermore, we integrated the optical experimental measurement results with PBRT in order to place the real measurement results into the virtually created scenes. In other words, our approach provided us with a way to establish a link of virtual scene with the real measurement results. Several images developed based on the above-mentioned approaches were analyzed and discussed to verify the pros and cons of the newly developed PBRT based light field camera technology. It will be shown that this newly developed light field camera approach can circumvent the loss of spatial resolution associated with adopting a micro-lens array in front of the image sensors. Detailed operational constraint, performance metrics, computation resources needed, etc. associated with this newly developed light field camera technique were presented in detail.

Increased Male-Male Mounting Behaviour in Desert Locusts during Infection with an Entomopathogenic Fungus.

Science.gov (United States)

Clancy, Lisa M; Cooper, Amy L; Griffith, Gareth W; Santer, Roger D

2017-07-18

Same-sex sexual behaviour occurs across diverse animal taxa, but adaptive explanations can be difficult to determine. Here we investigate male-male mounting (MMM) behaviour in female-deprived desert locust males infected with the entomopathogenic fungus Metarhizium acridum. Over a four-week period, infected locusts performed more MMM behaviours than healthy controls. Among infected locusts, the probability of MMM, and the duration of time spent MMM, significantly increased with the mounting locust's proximity to death. In experimental trials, infected locusts were also significantly more likely than controls to attempt to mount healthy males. Therefore, we demonstrate that MMM is more frequent among infected than healthy male locusts, and propose that this may be explained by terminal reproductive effort and a lowered mate acceptance threshold in infected males. However, during experimental trials mounting attempts were more likely to be successful if the mounted locusts were experimentally manipulated to have a reduced capacity to escape. Thus, reduced escape capability resulting from infection may also contribute to the higher frequency of MMM among infected male locusts. Our data demonstrate that pathogen infection can affect same-sex sexual behaviour, and suggest that the impact of such behaviours on host and pathogen fitness will be a novel focus for future research.

Cytogenetic of Male Infertility

Directory of Open Access Journals (Sweden)

Lutfiye Ozpak

2011-08-01

Full Text Available Infertility by definition, is not to get pregnant within one year of regular sexual relationship without protection, affects 15-20% of reproductive age couples. Approximately 30% of infertility cases are male originated. Male infertility is caused by endocrine-related genetic defects affecting urogenital system function. These defects adversely affect subsequent spermatogenesis, sexual function, fertility, early embryonic stage of sexual maturation. Autosomal and gonosomal, numerical and structural chromosome abnormalities and related syndromes rank at the top causes of male infertility. Similar chromosome abnormalities are detected in male infertility and as the rate of these abnormalities increase, it was found to reduce sperm count especially in azospermic and oligozoospermic men. [Archives Medical Review Journal 2011; 20(4.000: 230-245

Male-male aggression peaks at intermediate relatedness in a social spider mite

NARCIS (Netherlands)

Sato, Y.; Egas, M.; Sabelis, M.W.; Mochizuki, A.

2013-01-01

Theory predicts that when individuals live in groups or colonies, male-male aggression peaks at intermediate levels of local average relatedness. Assuming that aggression is costly and directed toward nonrelatives and that competition for reproduction acts within the colony, benefits of aggressive

Will male advertisement be a reliable indicator of paternal care, if offspring survival depends on male care?

OpenAIRE

Kelly, Natasha B.; Alonzo, Suzanne H.

2009-01-01

Existing theory predicts that male signalling can be an unreliable indicator of paternal care, but assumes that males with high levels of mating success can have high current reproductive success, without providing any parental care. As a result, this theory does not hold for the many species where offspring survival depends on male parental care. We modelled male allocation of resources between advertisement and care for species with male care where males vary in quality, and the effect of c...

Molybdenum cofactor deficiency causes translucent integument, male-biased lethality, and flaccid paralysis in the silkworm Bombyx mori.

Science.gov (United States)

Fujii, Tsuguru; Yamamoto, Kimiko; Banno, Yutaka

2016-06-01

Uric acid accumulates in the epidermis of Bombyx mori larvae and renders the larval integument opaque and white. Yamamoto translucent (oya) is a novel spontaneous mutant with a translucent larval integument and unique phenotypic characteristics, such as male-biased lethality and flaccid larval paralysis. Xanthine dehydrogenase (XDH) that requires a molybdenum cofactor (MoCo) for its activity is a key enzyme for uric acid synthesis. It has been observed that injection of a bovine xanthine oxidase, which corresponds functionally to XDH and contains its own MoCo activity, changes the integuments of oya mutants from translucent to opaque and white. This finding suggests that XDH/MoCo activity might be defective in oya mutants. Our linkage analysis identified an association between the oya locus and chromosome 23. Because XDH is not linked to chromosome 23 in B. mori, MoCo appears to be defective in oya mutants. In eukaryotes, MoCo is synthesized by a conserved biosynthesis pathway governed by four loci (MOCS1, MOCS2, MOCS3, and GEPH). Through a candidate gene approach followed by sequence analysis, a 6-bp deletion was detected in an exon of the B. mori molybdenum cofactor synthesis-step 1 gene (BmMOCS1) in the oya strain. Moreover, recombination was not observed between the oya and BmMOCS1 loci. These results indicate that the BmMOCS1 locus is responsible for the oya locus. Finally, we discuss the potential cause of male-biased lethality and flaccid paralysis observed in the oya mutants. Copyright © 2016 Elsevier Ltd. All rights reserved.

Seeing More by Showing Less: Orientation-Dependent Transparency Rendering for Fiber Tractography Visualization.

Directory of Open Access Journals (Sweden)

Chantal M W Tax

Full Text Available Fiber tractography plays an important role in exploring the architectural organization of fiber trajectories, both in fundamental neuroscience and in clinical applications. With the advent of diffusion MRI (dMRI approaches that can also model "crossing fibers", the complexity of the fiber network as reconstructed with tractography has increased tremendously. Many pathways interdigitate and overlap, which hampers an unequivocal 3D visualization of the network and impedes an efficient study of its organization. We propose a novel fiber tractography visualization approach that interactively and selectively adapts the transparency rendering of fiber trajectories as a function of their orientation to enhance the visibility of the spatial context. More specifically, pathways that are oriented (locally or globally along a user-specified opacity axis can be made more transparent or opaque. This substantially improves the 3D visualization of the fiber network and the exploration of tissue configurations that would otherwise be largely covered by other pathways. We present examples of fiber bundle extraction and neurosurgical planning cases where the added benefit of our new visualization scheme is demonstrated over conventional fiber visualization approaches.

Sneaker “jack” males outcompete dominant “hooknose” males under sperm competition in Chinook salmon (Oncorhynchus tshawytscha)

Science.gov (United States)

Young, Brent; Conti, David V; Dean, Matthew D

2013-01-01

In a variety of taxa, males deploy alternative reproductive tactics to secure fertilizations. In many species, small “sneaker” males attempt to steal fertilizations while avoiding encounters with larger, more aggressive, dominant males. Sneaker males usually face a number of disadvantages, including reduced access to females and the higher likelihood that upon ejaculation, their sperm face competition from other males. Nevertheless, sneaker males represent an evolutionarily stable strategy under a wide range of conditions. Game theory suggests that sneaker males compensate for these disadvantages by investing disproportionately in spermatogenesis, by producing more sperm per unit body mass (the “fair raffle”) and/or by producing higher quality sperm (the “loaded raffle”). Here, we test these models by competing sperm from sneaker “jack” males against sperm from dominant “hooknose” males in Chinook salmon. Using two complementary approaches, we reject the fair raffle in favor of the loaded raffle and estimate that jack males were ∼1.35 times as likely as hooknose males to fertilize eggs under controlled competitive conditions. Interestingly, the direction and magnitude of this skew in paternity shifted according to individual female egg donors, suggesting cryptic female choice could moderate the outcomes of sperm competition in this externally fertilizing species. PMID:24455130

Enhancement of Color Rendering Index for White Light LED Lamps by Red Y2O3:EU3+ Phosphor

Directory of Open Access Journals (Sweden)

Tran Hoang Quang Minh

2016-01-01

Full Text Available We present an application of the red Y2O3:Eu3+ dopant phosphor compound for reaching the color rendering index as high as 86. The Multi-Chip White LED lamps (MCW-LEDs with high Correlated Color Temperatures (CCTs including 7000 K and 8500 K are employed in this study. Besides, the impacts of the Y2O3:Eu3+ phosphor on the attenuation of light through phosphor layers of the various packages is also demonstrated based on the Beer-Lambert law. Simulation results provide important conclusion for selecting and developing the phosphor materials in MCW-LEDs manufacturing.

Male size composition affects male reproductive variance in Atlantic cod Gadus morhua L. spawning aggregations

DEFF Research Database (Denmark)

Bekkevold, Dorte

2006-01-01

Estimates of Atlantic cod Gadus morhua reproductive success, determined using experimental spawning groups and genetic paternity assignment of offspring, showed that within-group variance in male size correlated positively with the degree of male mating skew, predicting a decrease in male reprodu...

Three-dimensional volume rendering of the ankle based on magnetic resonance images enables the generation of images comparable to real anatomy.

Science.gov (United States)

Anastasi, Giuseppe; Cutroneo, Giuseppina; Bruschetta, Daniele; Trimarchi, Fabio; Ielitro, Giuseppe; Cammaroto, Simona; Duca, Antonio; Bramanti, Placido; Favaloro, Angelo; Vaccarino, Gianluigi; Milardi, Demetrio

2009-11-01

We have applied high-quality medical imaging techniques to study the structure of the human ankle. Direct volume rendering, using specific algorithms, transforms conventional two-dimensional (2D) magnetic resonance image (MRI) series into 3D volume datasets. This tool allows high-definition visualization of single or multiple structures for diagnostic, research, and teaching purposes. No other image reformatting technique so accurately highlights each anatomic relationship and preserves soft tissue definition. Here, we used this method to study the structure of the human ankle to analyze tendon-bone-muscle relationships. We compared ankle MRI and computerized tomography (CT) images from 17 healthy volunteers, aged 18-30 years (mean 23 years). An additional subject had a partial rupture of the Achilles tendon. The MRI images demonstrated superiority in overall quality of detail compared to the CT images. The MRI series accurately rendered soft tissue and bone in simultaneous image acquisition, whereas CT required several window-reformatting algorithms, with loss of image data quality. We obtained high-quality digital images of the human ankle that were sufficiently accurate for surgical and clinical intervention planning, as well as for teaching human anatomy. Our approach demonstrates that complex anatomical structures such as the ankle, which is rich in articular facets and ligaments, can be easily studied non-invasively using MRI data.

Effect of mating activity and dominance rank on male masturbation among free-ranging male rhesus macaques.

Science.gov (United States)

Dubuc, Constance; Coyne, Sean P; Maestripieri, Dario

2013-11-01

The adaptive function of male masturbation is still poorly understood, despite its high prevalence in humans and other animals. In non-human primates, male masturbation is most frequent among anthropoid monkeys and apes living in multimale-multifemale groups with a promiscuous mating system. In these species, male masturbation may be a non-functional by-product of high sexual arousal or be adaptive by providing advantages in terms of sperm competition or by decreasing the risk of sexually transmitted infections. We investigated the possible functional significance of male masturbation using behavioral data collected on 21 free-ranging male rhesus macaques ( Macaca mulatta ) at the peak of the mating season. We found some evidence that masturbation is linked to low mating opportunities: regardless of rank, males were most likely to be observed masturbating on days in which they were not observed mating, and lower-ranking males mated less and tended to masturbate more frequently than higher-ranking males. These results echo the findings obtained for two other species of macaques, but contrast those obtained in red colobus monkeys ( Procolobus badius ) and Cape ground squirrels ( Xerus inauris ). Interestingly, however, male masturbation events ended with ejaculation in only 15% of the observed masturbation time, suggesting that new hypotheses are needed to explain masturbation in this species. More studies are needed to establish whether male masturbation is adaptive and whether it serves similar or different functions in different sexually promiscuous species.

Male pattern baldness (image)

Science.gov (United States)

Male pattern baldness is a sex-linked characteristic that is passed from mother to child. A man can more accurately predict his chances of developing male pattern baldness by observing his mother's father than by looking ...

Antireflective sub-wavelength structures for improvement of the extraction efficiency and color rendering index of monolithic white light-emitting diode

DEFF Research Database (Denmark)

Ou, Yiyu; Corell, Dennis Dan; Dam-Hansen, Carsten

2011-01-01

We have theoretically investigated the influence of antireflective sub-wavelength structures on a monolithic white light-emitting diode (LED). The simulation is based on the rigorous coupled wave analysis (RCWA) algorithm, and both cylinder and moth-eye structures have been studied in the work. Our...... simulation results show that a moth-eye structure enhances the light extraction efficiency over the entire visible light range with an extraction efficiency enhancement of up to 26 %. Also for the first time to our best knowledge, the influence of sub-wavelength structures on both the color rendering index...

In-Situ Three-Dimensional Shape Rendering from Strain Values Obtained Through Optical Fiber Sensors

Science.gov (United States)

Chan, Hon Man (Inventor); Parker, Jr., Allen R. (Inventor)

2015-01-01

A method and system for rendering the shape of a multi-core optical fiber or multi-fiber bundle in three-dimensional space in real time based on measured fiber strain data. Three optical fiber cores arc arranged in parallel at 120.degree. intervals about a central axis. A series of longitudinally co-located strain sensor triplets, typically fiber Bragg gratings, are positioned along the length of each fiber at known intervals. A tunable laser interrogates the sensors to detect strain on the fiber cores. Software determines the strain magnitude (.DELTA.L/L) for each fiber at a given triplet, but then applies beam theory to calculate curvature, beading angle and torsion of the fiber bundle, and from there it determines the shape of the fiber in s Cartesian coordinate system by solving a series of ordinary differential equations expanded from the Frenet-Serrat equations. This approach eliminates the need for computationally time-intensive curve-tilting and allows the three-dimensional shape of the optical fiber assembly to be displayed in real-time.

Male scent-marking pheromone of Bombus ardens ardens (Hymenoptera; Apidae) attracts both conspecific queens and males

Science.gov (United States)

Kubo, Ryohei; Harano, Ken-ichi; Ono, Masato

2017-10-01

To explore the role of the volatiles emitted from male labial gland (LG) of the bumblebee Bombus ardens ardens, we investigated the responses of virgin queens and males to volatiles using a gas chromatography-electroantennographic detector (GC-EAD) system and Y-tube olfactometer. GC-EAD analysis revealed that citronellol, the main compound detected in the male LG, caused clear electrophysiological responses in the antennae of B. a. ardens virgin queens and males although two minor compounds elicited antennal responses when applied in a high concentration. Behavioral tests using a Y-tube olfactometer showed that queens and males were significantly attracted to both LG extracts and citronellol more than to the solvent alone. This is the first study to demonstrate that citronellol as a major compound of male scent-marking pheromone in B. a. ardens functions as a sex attractant for queens. The results also suggest that this compound has another function as a trail marker used by males.

Genetically conditioned male sterility

International Nuclear Information System (INIS)

Gottschalk, W.

1976-01-01

A survey is given of two different types of genetically controlled male sterility in higher plants. 'Functional' male sterility is due to the action of mutated genes causing a misdifferentiation of the growing points in different specific ways. Under the influence of the genes of this group either the stamens or the archespore tissues are not differentiated. In other mutants functionable male germ cells are produced but cannot be used for fertilizing the egg cells because the anthers remain closed or anthers and stigma become spatially separated from each other. Other genes of the group are responsible for the transformation of stamens into carpels, i.e. for a change of the hermaphrodite flower into a unisexually female one. A second type of male sterility is due to the action of ms genes influencing the course of micro-sporogenesis directly. They cause the breakdown of this process in a specific meiotic stage characteristic for each gene of the group. This breakdown is introduced by the degeneration of PMCs, microspores, or pollen grains preventing the production of male germ cells. The female sex organs remain uninfluenced. (author)

Sexy males and choosy females on exploded leks: correlates of male attractiveness in the Little Bustard.

Science.gov (United States)

Jiguet, Frédéric; Bretagnolle, Vincent

2014-03-01

In their choice of mates, females may use alternative tactics, including a comparative assessment of males in a population, using one or several relative preference criteria. Traits involved in female choice should presumably be variable between, but not within males, thus potentially providing reliable cues of male identity and quality for prospecting females. In lekking species, sexual selection is usually intense, and females can freely choose mates. Studying the Little Bustard Tetrax tetrax, a bird with an exploded lek mating system, we first identified male phenotypic traits that showed higher among, than within variation (plumage pattern, display rates and call structure). Among those and other traits (ornaments and their symmetry, body condition, lek spatial organization and territory quality), we identified phenotypic traits that correlated with male attractiveness toward females. At least four phenotypic male traits were correlated with female attraction, i.e. body condition, lek attendance, ornamental symmetry and display rates. Traits related to the initial female attraction on male territory seem to differ from traits related to the decision of females to stay in the territory of attractive males. Copyright © 2014 Elsevier B.V. All rights reserved.

Male foraging efficiency, but not male problem-solving performance, influences female mating preferences in zebra finches

Directory of Open Access Journals (Sweden)

Véronique Chantal

2016-08-01

Full Text Available Experimental evidence suggests that females would prefer males with better cognitive abilities as mates. However, little is known about the traits reflecting enhanced cognitive skills on which females might base their mate-choice decisions. In particular, it has been suggested that male foraging performance could be used as an indicator of cognitive capacity, but convincing evidence for this hypothesis is still lacking. In the present study, we investigated whether female zebra finches (Taeniopygia guttata modify their mating preferences after having observed the performance of males on a problem-solving task. Specifically, we measured the females’ preferences between two males once before and once after an observation period, during which their initially preferred male was incapable of solving the task contrary to their initially less-preferred male. We also conducted a control treatment to test whether the shift in female preferences was attributable to differences between the two stimulus males in their foraging efficiency. Finally, we assessed each bird’s performance in a color associative task to check whether females can discriminate among males based on their learning speed. We found that females significantly increased their preference toward the most efficient male in both treatments. Yet, there was no difference between the two treatments and we found no evidence that females assess male cognitive ability indirectly via morphological traits. Thus, our results suggest that females would not use the males’ problem-solving performance as an indicator of general cognitive ability to gain indirect fitness benefits (i.e., good genes but rather to assess their foraging efficiency and gain direct benefits.

Volume rendering based on magnetic resonance imaging: advances in understanding the three-dimensional anatomy of the human knee

Science.gov (United States)

Anastasi, Giuseppe; Bramanti, Placido; Di Bella, Paolo; Favaloro, Angelo; Trimarchi, Fabio; Magaudda, Ludovico; Gaeta, Michele; Scribano, Emanuele; Bruschetta, Daniele; Milardi, Demetrio

2007-01-01

The choice of medical imaging techniques, for the purpose of the present work aimed at studying the anatomy of the knee, derives from the increasing use of images in diagnostics, research and teaching, and the subsequent importance that these methods are gaining within the scientific community. Medical systems using virtual reality techniques also offer a good alternative to traditional methods, and are considered among the most important tools in the areas of research and teaching. In our work we have shown some possible uses of three-dimensional imaging for the study of the morphology of the normal human knee, and its clinical applications. We used the direct volume rendering technique, and created a data set of images and animations to allow us to visualize the single structures of the human knee in three dimensions. Direct volume rendering makes use of specific algorithms to transform conventional two-dimensional magnetic resonance imaging sets of slices into see-through volume data set images. It is a technique which does not require the construction of intermediate geometric representations, and has the advantage of allowing the visualization of a single image of the full data set, using semi-transparent mapping. Digital images of human structures, and in particular of the knee, offer important information about anatomical structures and their relationships, and are of great value in the planning of surgical procedures. On this basis we studied seven volunteers with an average age of 25 years, who underwent magnetic resonance imaging. After elaboration of the data through post-processing, we analysed the structure of the knee in detail. The aim of our investigation was the three-dimensional image, in order to comprehend better the interactions between anatomical structures. We believe that these results, applied to living subjects, widen the frontiers in the areas of teaching, diagnostics, therapy and scientific research. PMID:17645453

[Computer-assisted operational planning for pediatric abdominal surgery. 3D-visualized MRI with volume rendering].

Science.gov (United States)

Günther, P; Tröger, J; Holland-Cunz, S; Waag, K L; Schenk, J P

2006-08-01

Exact surgical planning is necessary for complex operations of pathological changes in anatomical structures of the pediatric abdomen. 3D visualization and computer-assisted operational planning based on CT data are being increasingly used for difficult operations in adults. To minimize radiation exposure and for better soft tissue contrast, sonography and MRI are the preferred diagnostic methods in pediatric patients. Because of manifold difficulties 3D visualization of these MRI data has not been realized so far, even though the field of embryonal malformations and tumors could benefit from this.A newly developed and modified raycasting-based powerful 3D volume rendering software (VG Studio Max 1.2) for the planning of pediatric abdominal surgery is presented. With the help of specifically developed algorithms, a useful surgical planning system is demonstrated. Thanks to the easy handling and high-quality visualization with enormous gain of information, the presented system is now an established part of routine surgical planning.

Computer-assisted operational planning for pediatric abdominal surgery. 3D-visualized MRI with volume rendering

International Nuclear Information System (INIS)

Guenther, P.; Holland-Cunz, S.; Waag, K.L.

2006-01-01

Exact surgical planning is necessary for complex operations of pathological changes in anatomical structures of the pediatric abdomen. 3D visualization and computer-assisted operational planning based on CT data are being increasingly used for difficult operations in adults. To minimize radiation exposure and for better soft tissue contrast, sonography and MRI are the preferred diagnostic methods in pediatric patients. Because of manifold difficulties 3D visualization of these MRI data has not been realized so far, even though the field of embryonal malformations and tumors could benefit from this. A newly developed and modified raycasting-based powerful 3D volume rendering software (VG Studio Max 1.2) for the planning of pediatric abdominal surgery is presented. With the help of specifically developed algorithms, a useful surgical planning system is demonstrated. Thanks to the easy handling and high-quality visualization with enormous gain of information, the presented system is now an established part of routine surgical planning. (orig.) [de

Dyadic, Partner, and Social Network Influences on Intimate Partner Violence among Male-Male Couples

Directory of Open Access Journals (Sweden)

Rob Stephenson

2013-08-01

Full Text Available Introduction: Despite a recent focus on intimate partner violence (IPV among men who have sex with men (MSM, the male-male couple is largely absent from the IPV literature. Specifically, research on dyadic factors shaping IPV in male-male couples is lacking.Methods: We took a subsample of 403 gay/bisexual men with main partners from a 2011 survey of approximately 1,000 gay and bisexual men from Atlanta. Logistic regression models of recent (,12 month experience and perpetration of physical and sexual IPV examined dyadic factors, including racial differences, age differences, and social network characteristics of couples as key covariates shaping the reporting of IPV.Results: Findings indicate that men were more likely to report perpetration of physical violence if they were a different race to their main partner, whereas main partner age was associated with decreased reporting of physical violence. Having social networks that contained more gay friends was associated with significant reductions in the reporting of IPV, whereas having social networks comprised of sex partners or closeted gay friends was associated with increased reporting of IPV victimization and perpetration.Conclusion: The results point to several unique factors shaping the reporting of IPV within male-male couples and highlight the need for intervention efforts and prevention programs that focus on male couples, a group largely absent from both research and prevention efforts. [West J Emerg Med. 2013;14(4:316–323.

Clinical Recommendations on Emergency Medical Care Rendering to Children with Acute Intoxication

Directory of Open Access Journals (Sweden)

A. A. Baranov

2015-01-01

Full Text Available The article is dedicated to the issue of intoxication in children. Acute accidental intoxication appears to be especially relevant for pediatric practice. Drugs, various chemicals frequently used in everyday life and in farming, as well as animal poisons, including snake poisons, may have a toxic effect on children. Specialists of professional associations of physicians “Russian Society of Emergency Medicine” and pediatricians “Union of Pediatricians of Russia” formulated and briefly described the main causes of acute intoxication in children, clinical manifestations and the most significant laboratory indicators of toxic manifestations for various substances, as well as therapy principles and algorithms for such conditions in compliance with principles of the evidence-based medicine. The article presents pathognomonic symptoms and peculiarities of drug intoxication, provides a description of mediator symptoms of intoxication with various substances, as well as the symptoms that may indicate toxic effect. The article contains a description of principles of correction of vital body functions, measures for removing toxic substances from the body and information on the main antidotes. Special attention is given to the most frequent types of intoxication (with organic acids, lye, naphazoline, paracetamol, snake poisons [viper bite]. The article lists stage of medical care rendering to children suffering from acute intoxication and presents prognosis and further management of pediatric patients suffering from such conditions. 

Interactive definition of transfer functions in volume rendering based on image markers

International Nuclear Information System (INIS)

Teistler, Michael; Nowinski, Wieslaw L.; Breiman, Richard S.; Liong, Sauw Ming; Ho, Liang Yoong; Shahab, Atif

2007-01-01

Objectives A user interface for transfer function (TF) definition in volume rendering (VR) was developed that allows the user to intuitively assign color and opacity to the original image intensities. This software may surpass solutions currently deployed in clinical practice by simplifying the use of TFs beyond predefined settings that are not always applicable. Materials and methods The TF definition is usually a cumbersome task that requires the user to manipulate graphical representations of the TF (e.g. trapezoids). A new method that allows the user to place markers at points of interest directly on CT and MRI images or orthogonal reformations was developed based on two-dimensional region growing and a few user-definable marker-related parameters. For each user defined image marker, a segment of the transfer function is computed. The resulting TF can also be applied to the slice image views. Results were judged subjectively. Results Each individualized TF can be defined interactively in a few simple steps. For every user interaction, immediate visual feedback is given. Clinicians who tested the application appreciated being able to directly work on familiar slice images to generate the desired 3D views. Conclusion Interactive TF definition can increase the actual utility of VR, help to understand the role of the TF with its variations, and increase the acceptance of VR as a clinical tool. (orig.)

Adolescent Male Human Papillomavirus Vaccination

Directory of Open Access Journals (Sweden)

Vivian C. Nanagas MD, MSc

2016-04-01

Full Text Available Objective. To determine male vaccination rates with quadrivalent human papillomavirus vaccine (HPV4 before and after the October 2011 national recommendation to routinely immunize adolescent males. Methods. We reviewed HPV4 dose 1 (HPV4-1 uptake in 292 adolescent males in our urban clinic prior to national recommendations and followed-up for HPV4 series completion rates. After national recommendation, 248 urban clinic and 247 suburban clinic males were reviewed for HPV4-1 uptake. Factors associated with HPV4-1 refusal were determined with multiple logistic regression. Results. Of the initial 292 males, 78% received HPV4-1 and 38% received the 3-dose series. After recommendation, HPV4-1 uptake was 59% and 7% in urban and suburban clinics, respectively. Variables associated with HPV4-1 uptake/refusal included time period, race, type of insurance, and receipt of concurrent vaccines. Conclusions. HPV4-1 vaccination rates in our urban clinic were high before and after routine HPV vaccine recommendations for adolescent males. Our vaccination rates were much higher than in a suburban practice.

Hybrid male sterility and genome-wide misexpression of male reproductive proteases

OpenAIRE

Gomes, Suzanne; Civetta, Alberto

2015-01-01

Hybrid male sterility is a common barrier to gene flow between species. Previous studies have posited a link between misregulation of spermatogenesis genes in interspecies hybrids and sterility. However, in the absence of fully fertile control hybrids, it is impossible to differentiate between misregulation associated with sterility vs. fast male gene regulatory evolution. Here, we differentiate between these two possibilities using a D. pseudoobscura species pair that experiences unidirectio...

Grooming reciprocity in male Tibetan macaques.

Science.gov (United States)

Xia, Dong-Po; Li, Jin-Hua; Garber, Paul A; Matheson, Megan D; Sun, Bing-Hua; Zhu, Yong

2013-10-01

In several primate species, adult males are reported to compete for access to reproductive partners as well as forming affiliative and cohesive social bonds based on the exchange of goods or services. We hypothesized that among a broad set of fitness-maximizing strategies, grooming can be used by individual adult males to enhance social relationships through reciprocity and/or through the interchange of grooming for a different but equivalent good or service. We used focal animal sampling and continuously recorded dyadic grooming and agonistic interactions to test a series of predictions regarding male social interactions in a free-ranging group of Tibetan macaques (Macaca thibetana) at Huangshan, China. During the non-mating season or between males of similar rank throughout the year, grooming effort given was matched by grooming effort received. However, lower ranking males groomed higher ranking males at a greater rate and/or for a longer duration during both the mating and non-mating periods. We found that higher ranking males directed less aggression towards males with whom they formed a frequent grooming partnership, indicating that grooming received was interchanged for increased social tolerance. These data suggest that individual male Tibetan macaques employ alternative social strategies associated with grooming reciprocity or interchange depending on dominance rank and rates of aggression, and highlight the importance of both biological markets and grooming reciprocity as behavioral mechanisms used by resident adult males to form and maintain affiliative social bonds. © 2013 Wiley Periodicals, Inc.

Turn it off! the effects of exposure to male-male erotic imagery on heterosexuals' attitudes toward gay men.

Science.gov (United States)

Golom, Frank D; Mohr, Jonathan J

2011-01-01

Despite the recent proliferation of lesbian, gay, and bisexual (LGB) thematic content in U.S. media, there have been relatively few empirical investigations examining its impact on heterosexuals' attitudes toward LGB individuals. This study examined the effect of one type of content, male-male homoerotic imagery, on male and female heterosexuals' attitudes toward, stereotypes about, and affective reactions to gay men. One hundred ninety-eight undergraduate students were assigned to either a male-male or male-female erotica condition, and their corresponding attitudes toward gay men were assessed. Results revealed that the effect of erotic imagery (male-male vs. male-female) on participants' stereotype and affect scores differed for men and women at varying levels of sexual anxiety. The implications of these findings are discussed in light of the literature on exposure to erotic imagery and attitudes toward gay men. In particular, the study highlights the need for additional research that acknowledges within-gender heterogeneity with respect to antigay attitude valence, extremity, and function.

Political ideology and labor arbitrators' decision making in work-family conflict cases.

Science.gov (United States)

Biernat, Monica; Malin, Martin H

2008-07-01

Labor arbitrators were asked to render decisions about grievances brought by employees who had been fired because of problems created by work conflicts with family responsibilities. The study examined the effects of experimentally manipulated grievant attributes (gender, type of work-family conflict) as well as arbitrator attributes (gender, political ideology) on decision making. When employees were depicted as having had child care problems, liberal arbitrators tended to favor female over male grievants, and political conservatism predicted more favorable judgments rendered toward male grievants. Overall, the data suggest that child care responsibilities cue different patterns of gender bias among liberal and conservative decision makers.

Cytogenetics of Triatominae: III - A study on male sterility induced through hybridization of Triatoma sórdida and Triatoma pseudomaculata

Directory of Open Access Journals (Sweden)

Giorgio Schreiber

1975-08-01

Full Text Available Males from bilateral crosses between Triatoma sórdida and Triatoma pseudomaculata were unable to give offspring, as shown by subsequent backcrosses (BC between hybrid males and parental females. This kind of sterility indueed through interspecific hybridization seems to be due to lack of sperm migration from the bursa copulatrix to the spermateca, thus suggesting primarily failure on the part of hybrid males to produce and/or to incorporate male accessory secretions into the spermatophore bulb. Addicional proof that sterility induced in hybrid males is at the sperm level has been afforded by the spermatogenesis herein studied. The anomalous processes like; 1 prophases of spermatogonia with the chromosomes scattered in the cytoplasm, 2 first metaphases with unpaired tetrades, 3 spermatids differing in size and 4 spermatozoa of abnormal shape and generdlly of giant size, can be taken as an indicator of the degree of departure from the normal course of spermatogenesis.Os machos provenientes de cruzamentos bilaterais entre Triatoma sórdida e Triatoma pseudomaculata revelaram a incapacidade de produzir progênie, como se demonstra nos retrocruzamentos de machos híbridos com fêmeas das espécies paternas. Esta modalidade de esterilidade induzida através da hibridação interespecífica, parece ser devida à ausência de migração do esperma, determinada pela incapacidade dos híbridos machos produzirem a secreção opaca em suas glândulas acessórias e/ou incorporá-la à luz do espermatóforo. A prova adicional de que a incompatibilidade induzida em triatomíneos, através da hibridação inter específica, está no nível do esperma é fornecida pelo tipo anômalo de espermatogênese em híbridos aqui descrito, mostrando deste modo que: as prófases espermatogoniais têm os núcleos disruptos e os cromossomos espelhados no citoplasma. As primeiras metáfases meióticas têm as tétrades desemparelhadas. Os grupos de cromatídes assim obtidos

Vocal competition in male Xenopus laevis frogs

OpenAIRE

Tobias, Martha L.; Corke, Anna; Korsh, Jeremy; Yin, David; Kelley, Darcy B.

2010-01-01

Male Xenopus laevis frogs produce underwater advertisement calls that attract gravid females and suppress calling by male competitors. Here we explore whether groups of males establish vocal ranks and whether auditory cues alone suffice for vocal suppression. Tests of male–male pairs within assigned groups reveal linear vocal dominance relations, in which each male has a defined rank. Both the duration over which males interact, as well as the number of competitive opportunities, affect linea...

Male Adolescent Contraceptive Utilization.

Science.gov (United States)

Finkel, Madelon Lubin; Finkel, David J.

1978-01-01

The contraceptive utilization of a sample of sexually active, urban, high school males (Black, Hispanic, and White) was examined by anonymous questionnaire. Contraceptive use was haphazard, but White males tended to be more effective contraceptors than the other two groups. Reasons for nonuse were also studied. (Author/SJL)

Condoms - male

Science.gov (United States)

Prophylactics; Rubbers; Male condoms; Contraceptive - condom; Contraception - condom; Barrier method - condom ... your health care provider or pharmacy about emergency contraception ("morning-after pills"). PROBLEMS WITH CONDOM USE Some ...

[Inheritance of reversions to male fertility in male-sterile sorghum hybrids with 9E cytoplasm male sterility induced by environmental conditions].

Science.gov (United States)

Elkonin, L A; Gerashchenkov, G A; Domanina, I V; Rozhnova, N A

2015-03-01

Heritable phenotypic alterations occurring during plant ontogenesis under the influence of environmental factors are among the most intriguing genetic phenomena. It was found that male-sterile sorghum hybrids in the 9E cytoplasm from the F1 and F2 generations, which were obtained by crossing CMS lines with different fertile lines grown in field conditions, were transferred to greenhouse produce fertile tillers. Lines created by the self-pollination of revertant tillers exhibit complete male fertility upon cultivation under various environments (in the field, Tdry plot,(y) Tirrigated plot(y)). In a number of test-crosses of revertants to CMS lines in the 9E cytoplasm, restoration of male fertility in F1 hybrids was found, indicating that revertants possess functional fertility-restoring genes. A high positive correlation was found between the fertility level of the test-cross hybrids and the hydrothermal coefficient (the ratio of the sum of precipitation to the sum of temperatures) during the booting stage and pollen maturation (r = 0.75...0.91; Pmale fertility are due to up-regulation of fertility-restoring genes by a high level of water availability. Comparative MSAP-analysis of DNA of male-sterile and male-fertile test-cross hybrids using HpaII/MspI restrictases and primers to polygalacturonase gene ADPG2, which is required for cell separation during reproductive development, and gene MYB46, the transcription factor regulating secondary wall biosynthesis, revealed differences in the number and the length of amplified fragments. Changes in the methylation of these genes in conditions of drought stress are apparently the reason for male sterility of sorghum hybrids in the 9E cytoplasm. These data demonstrate that methylation of nuclear genes in sterility-inducing cytoplasm may be one of mechanisms causing the CMS phenomenon.

Male breast lesions

International Nuclear Information System (INIS)

Matushita, J.P.K.; Andrade, L.G. de; Carregal, E.; Marimatsu, R.I.; Matushita, J.S.

1989-01-01

Roentgenographic examination of the male breast is an important aspect of the continued, intensive investigation of the radiologic morphology of the normal and diseased breast conducted in 17 cases examined at the Instituto Nacional do Cancer - RJ. It is purpose of this report to present the Roentgen appearance of various lesions of the male breast as they have been found in our practice and also to stress some of the difficulties in the differential diagnosis of these lesions. (author) [pt

Psychobiology of Male Homosexuality: Recent Findings

OpenAIRE

Annicchiarico Iseda, Ivan Darío; Universidad Nacional de Colombia

2009-01-01

In this paper, empirical and theoretical reports which question the causes of male homosexuality are examined. According to these reports, male homosexuality differs from female homosexuality in some respects. Additionally, evidence favouring the consideration of male homosexuality as a biological condition is shown: there are brain differences between gay men and heterosexual men, there are genetic and perinatal factors associated to male homosexuality, there are cognitive and behavioral dif...