Q-switched laser tattoo removal

Directory of Open Access Journals (Sweden)

Viljem H. topčič

2013-10-01

Full Text Available Background: Decorative tattooing gained popularity in many western countries throughout the 1990s. Some estimates show that approximately 10 % of men in the United States already have tattoos. However, tattoos often become a personal regret. As recent surveys suggest, 17 % of people that have obtained a tattoo and more than 50 % of adults over the age of 40 in the United States of America consider having them removed. The same trend can be observed in our country as well. Laser therapy is the gold standard for tattoo removal. In Slovenia, laser tattoo removal therapy is available and widely accessible. There is a wide range of facilities offering laser tattoo removal, ranging from different private clinics to beauty salons. Different facilities use different lasers, but not all lasers, however, are optimal for successful and complete tattoo removal, as inappropriate use can cause many unwanted side effects.Methods: Eleven (11 patients (2 men and 9 women requesting tattoo removal were treated in our department. When treating our patients, we used Fotona’s QX MAX quality-switched Nd:YAG laser which offers four different wavelengths in a single system; 1064 nm Nd:YAG was used to treat and remove dark pigments, 532 nm KTP for red, tan-colored, purple and orange tattoo inks, 650 nm dye for green tattoo inks and 585 nm dye for sky-blue colored inks.Results: Satisfactory tattoo removal was achieved in all patients treated. Patients were very satisfied with the success and the number of treatments needed for tattoo removal. There were mild unwanted side effects and the pain was moderate. The average number of treatments required for complete tattoo removal was less than 7, ranging from 3 to 21 treatments. Patients’ satisfaction with tattoo removal was estimated at 5.2 (on a scale from 1 to 6.Conclusions: Our study showed that Q-switched lasers successfully remove tattoo ink, however several treatments are required for satisfactory tattoo removal

Prediction of unwanted pregnancies using logistic regression, probit regression and discriminant analysis.

Science.gov (United States)

Ebrahimzadeh, Farzad; Hajizadeh, Ebrahim; Vahabi, Nasim; Almasian, Mohammad; Bakhteyar, Katayoon

2015-01-01

Unwanted pregnancy not intended by at least one of the parents has undesirable consequences for the family and the society. In the present study, three classification models were used and compared to predict unwanted pregnancies in an urban population. In this cross-sectional study, 887 pregnant mothers referring to health centers in Khorramabad, Iran, in 2012 were selected by the stratified and cluster sampling; relevant variables were measured and for prediction of unwanted pregnancy, logistic regression, discriminant analysis, and probit regression models and SPSS software version 21 were used. To compare these models, indicators such as sensitivity, specificity, the area under the ROC curve, and the percentage of correct predictions were used. The prevalence of unwanted pregnancies was 25.3%. The logistic and probit regression models indicated that parity and pregnancy spacing, contraceptive methods, household income and number of living male children were related to unwanted pregnancy. The performance of the models based on the area under the ROC curve was 0.735, 0.733, and 0.680 for logistic regression, probit regression, and linear discriminant analysis, respectively. Given the relatively high prevalence of unwanted pregnancies in Khorramabad, it seems necessary to revise family planning programs. Despite the similar accuracy of the models, if the researcher is interested in the interpretability of the results, the use of the logistic regression model is recommended.

Optical hair removal.

Science.gov (United States)

Ort, R J; Anderson, R R

1999-06-01

Traditional methods of hair removal have proven unsatisfactory for many individuals with excessive or unwanted hair. In the last few years, several lasers and xenon flashlamps have been developed that promise to fulfill the need for a practical, safe, and long-lasting method of hair removal. Aggressive marketing of these has contributed to their popularity among patients and physicians. However, significant controversy and confusion surrounds this field. This article provides a detailed explanation of the scientific underpinnings for optical hair removal and explores the advantages and disadvantages of the various devices currently available (Nd:YAG, ruby, alexandrite, diode lasers, and xenon flashlamp). Treatment and safety guidelines are provided to assist the practitioner in the use of these devices. Although the field of optical hair removal is still in its infancy, initial reports of long-term efficacy are encouraging.

Hair Removal

DEFF Research Database (Denmark)

Hædersdal, Merete

2011-01-01

Hair removal with optical devices has become a popular mainstream treatment that today is considered the most efficient method for the reduction of unwanted hair. Photothermal destruction of hair follicles constitutes the fundamental concept of hair removal with red and near-infrared wavelengths...... suitable for targeting follicular and hair shaft melanin: normal mode ruby laser (694 nm), normal mode alexandrite laser (755 nm), pulsed diode lasers (800, 810 nm), long-pulse Nd:YAG laser (1,064 nm), and intense pulsed light (IPL) sources (590-1,200 nm). The ideal patient has thick dark terminal hair......, white skin, and a normal hormonal status. Currently, no method of lifelong permanent hair eradication is available, and it is important that patients have realistic expectations. Substantial evidence has been found for short-term hair removal efficacy of up to 6 months after treatment with the available...

Hair removal

DEFF Research Database (Denmark)

Haedersdal, Merete; Haak, Christina S

2011-01-01

Hair removal with optical devices has become a popular mainstream treatment that today is considered the most efficient method for the reduction of unwanted hair. Photothermal destruction of hair follicles constitutes the fundamental concept of hair removal with red and near-infrared wavelengths...... suitable for targeting follicular and hair shaft melanin: normal mode ruby laser (694 nm), normal mode alexandrite laser (755 nm), pulsed diode lasers (800, 810 nm), long-pulse Nd:YAG laser (1,064 nm), and intense pulsed light (IPL) sources (590-1,200 nm). The ideal patient has thick dark terminal hair......, white skin, and a normal hormonal status. Currently, no method of lifelong permanent hair eradication is available, and it is important that patients have realistic expectations. Substantial evidence has been found for short-term hair removal efficacy of up to 6 months after treatment with the available...

Legal Briefing: Unwanted Cesareans and Obstetric Violence.

Science.gov (United States)

Pope, Thaddeus Mason

2017-01-01

A capacitated pregnant woman has a nearly unqualified right to refuse a cesarean section. Her right to say "no" takes precedence over clinicians' preferences and even over clinicians' concerns about fetal health. Leading medical societies, human rights organizations, and appellate courts have all endorsed this principle. Nevertheless, clinicians continue to limit reproductive liberty by forcing and coercing women to have unwanted cesareans. This "Legal Briefing" reviews recent court cases involving this type of obstetric violence. I have organized these court cases into the following six categories: 1. Epidemic of Unwanted Cesareans 2. Court-Ordered Cesareans 3. Physician-Coerced Cesareans 4. Physician-Ordered Cesareans 5. Cesareans for Incapacitated Patients 6. Cesareans for Patients in a Vegetative State or Who Are Brain Dead. Copyright 2017 The Journal of Clinical Ethics. All rights reserved.

3-D Printed Anti-Reflection Structures for the Terahertz Region

Science.gov (United States)

Bomba, Jarosław; Suszek, Jarosław; Makowski, Michał; Sobczyk, Artur; Sypek, Maciej

2018-01-01

Terahertz radiation has a growing number of applications in material characterization, where spectral fingerprinting and diffractive effects are the carriers of information. On the other hand, electromagnetic waves in the range of millimeters exhibit strong unwanted specular reflections, resulting in uncontrolled interferences. This problem is especially disturbing in the goniometric time-domain spectroscopy (TDS) configuration, where angular distribution of the field modified by the sample is altered by unwanted reflections. For this reason, low-cost anti-reflection layers are desired. Here, we present a simple way of designing and manufacturing one-sided and two-sided anti-reflection polyamide layers for the THz range. The structures were fabricated using 3-D printers based on selective laser sintering. We demonstrate experimentally in the goniometric time-domain spectroscopy the significant reduction of wavelength-dependent oscillations in Fabry-Perot configuration in the range between 0.1 and 0.3 THz. We also examine the influence of the anti-reflection layers on the distribution of THz energy in reflected, transmitted, and diffracted fields.

Hair removal in adolescence

Directory of Open Access Journals (Sweden)

Sandra Pereira

2015-06-01

Full Text Available Introduction: Due to hormonal stimulation during puberty, changes occur in hair type and distribution. In both sexes, body and facial unwanted hair may have a negative psychological impact on the teenager. There are several available methods of hair removal, but the choice of the most suitable one for each individual can raise doubts. Objective: To review the main methods of hair removal and clarify their indications, advantages and disadvantages. Development: There are several removal methods currently available. Shaving and depilation with chemicals products are temporary methods, that need frequent repetition, because hair removal is next to the cutaneous surface. The epilating methods in which there is full hair extraction include: epilation with wax, thread, tweezers, epilating machines, laser, intense pulsed light, and electrolysis. Conclusions: The age of beginning hair removal and the method choice must be individualized and take into consideration the skin and hair type, location, dermatological and endocrine problems, removal frequency, cost and personal preferences.

Inhibitors and Facilitators of Unwanted Adolescent Pregnancy in Iran and the World: A Review

Directory of Open Access Journals (Sweden)

Farzaneh Rashidi Fakari

2017-07-01

Full Text Available Background: Approximately 16 million adolescent girls aged 15 to 19 years and 1 million teenage girls less than 15 years of age become pregnant worldwide annually, and the majority of these pregnancies are unintended. Unwanted adolescent pregnancy coupled with impaired and inadequate physical and mental health can lead to slow progression of the community and the short- and long-term negative consequences. Aim: This study aimed to investigate the inhibitors and facilitators of unwanted adolescent pregnancy in Iran and across the globe. Method: The current narrative review was conducted using the keywords of "pregnancy", "unwanted", and "adolescent" in both Persian and English articles published from 2000 to 2016. The searched databases included Google Scholar, PubMed, Elsevier, Scopus, ProQuest, Irandoc, Scientific Information Database (SID, and Magiran. Results: Twenty-nine articles related to the study objectives were selected. Our investigations indicated that the inhibitors of unwanted adolescent pregnancy could be classified into four main categories of abstinence, religious beliefs, adolescent employment program, and parent-adolescent relationship. Further, the facilitators of unwanted adolescent pregnancy were categorized into eight categories of pornography on the Internet and media, peer pressure, lack of knowledge and information, drug and alcohol abuse, violence, adherence to fashion in clothing, economic and income status and family structure. Implications for Practice: The findings of this review revealed that more studies were conducted to explore the facilitators of unwanted adolescent pregnancy in comparison with inhibitors. Shortage of knowledge and information among adolescents plays a major role in unwanted adolescent pregnancy. However, a definitive judgment on the contribution of each factor to unwanted adolescent pregnancy requires further in-depth studies.

Views on unwanted effects of leave-on emollients and experiences msurrounding their incidence

OpenAIRE

Oakley, Robert; Lawton, Sandra

2016-01-01

Background: The mainstay treatment for eczema is leave-on emollients. The aim of this study was to find out more about unwanted effects that have been reported with their use, as little is known due to a lack of formal reporting.\\ud \\ud Aims: To gain a greater understanding of eczema patients’ experiences of unwanted effects such as stinging, what influence unwanted effects had on their therapy, why subsequent variations in leave-on emollient adherence followed and what patients desire in the...

UNWANTED BEHAVIOUR AMONG YOUTH: INFLUENCE OF DIGITAL MEDIA CONSUMPTION

Directory of Open Access Journals (Sweden)

Mateja Rek

2016-09-01

Full Text Available In many cases of unwanted behaviour that we analysed (for instance in case of cheating on school tests, beating, being bullied, conflicts with parents, gambling, intentionally damaging or destroying property we found a statistically significant effect of the extent of digital media use on incidence of such behaviour. Youth, who are large digital media users, behave in such socially unwanted ways more often compared to smaller media users. A dominant share of youth isn’t involved in violent behaviour or vandalism at all. However, the incidence of violence or vandalism in the large media users group is significantly higher compared to low and medium users group.

Mercury removal in utility wet scrubber using a chelating agent

Science.gov (United States)

Amrhein, Gerald T.

2001-01-01

A method for capturing and reducing the mercury content of an industrial flue gas such as that produced in the combustion of a fossil fuel or solid waste adds a chelating agent, such as ethylenediaminetetraacetic acid (EDTA) or other similar compounds like HEDTA, DTPA and/or NTA, to the flue gas being scrubbed in a wet scrubber used in the industrial process. The chelating agent prevents the reduction of oxidized mercury to elemental mercury, thereby increasing the mercury removal efficiency of the wet scrubber. Exemplary tests on inlet and outlet mercury concentration in an industrial flue gas were performed without and with EDTA addition. Without EDTA, mercury removal totaled 42%. With EDTA, mercury removal increased to 71%. The invention may be readily adapted to known wet scrubber systems and it specifically provides for the removal of unwanted mercury both by supplying S.sup.2- ions to convert Hg.sup.2+ ions into mercuric sulfide (HgS) and by supplying a chelating agent to sequester other ions, including but not limited to Fe.sup.2+ ions, which could otherwise induce the unwanted reduction of Hg.sup.2+ to the form, Hg.sup.0.

Unwanted Behaviors and Nuisance Behaviors Among Neighbors in a Belgian Community Sample.

Science.gov (United States)

Michaux, Emilie; Groenen, Anne; Uzieblo, Katarzyna

2015-06-30

Unwanted behaviors between (ex-)intimates have been extensively studied, while those behaviors within other contexts such as neighbors have received much less scientific consideration. Research indicates that residents are likely to encounter problem behaviors from their neighbors. Besides the lack of clarity in the conceptualization of problem behaviors among neighbors, little is known on which types of behaviors characterize neighbor problems. In this study, the occurrence of two types of problem behaviors encountered by neighbors was explored within a Belgian community sample: unwanted behaviors such as threats and neighbor nuisance issues such as noise nuisance. By clearly distinguishing those two types of behaviors, this study aimed at contributing to the conceptualization of neighbor problems. Next, the coping strategies used to deal with the neighbor problems were investigated. Our results indicated that unwanted behaviors were more frequently encountered by residents compared with nuisance problems. Four out of 10 respondents reported both unwanted pursuit behavior and nuisance problems. It was especially unlikely to encounter nuisance problems in isolation of unwanted pursuit behaviors. While different coping styles (avoiding the neighbor, confronting the neighbor, and enlisting help from others) were equally used by the stalked participants, none of them was perceived as being more effective in reducing the stalking behaviors. Strikingly, despite being aware of specialized help services such as community mediation services, only a very small subgroup enlisted this kind of professional help. © The Author(s) 2015.

Relationship between Unwanted Pregnancy and Health-Related Quality of Life in Pregnant Women.

Science.gov (United States)

Ali, Azizi

2016-06-01

To determine the relationship between unwanted pregnancy and health-related quality of life in pregnant women. Case-control study. Department of Community Medicine, Kermanshah University of Medical Sciences, Kermanshah, Iran, from October 2013 to July 2014. Of the pregnant women who presented to primary healthcare centers of Kermanshah, Iran to receive prenatal care at 6 - 10 weeks of their pregnancy, those with unwanted pregnancy were selected as cases and those with wanted pregnancy were selected as control group. The selection process was done using multi-stage stratified random sampling. Frequency matching was applied to match the two groups. Quality of life was measured by the SF-36 questionnaire and was compared by the t-test. Relationship power between pregnancy type (wanted or unwanted pregnancy) and impairment of quality of life subscales as the outcome was assessed using odds ratio (OR). Frequency distribution of matched variables was not statistically different between the two studied groups. Mean scores of mental component summary and physical component summary as well as eight subscales (physical functioning, role, bodily pain, general health, vitality, social functioning, role emotional, and mental health) were lower in the unwanted pregnancy group compared to women with wanted pregnancy (p < 0.001). The highest high impairment odds ratio was highest for the mental component summary (MCS) (OR = 9.19; 95% CI = 5.17- 16.32) and vitality subscale (OR = 5.2; 95% CI = 2.89- 9.33). Mental health of the pregnant women with unwanted pregnancy is affected more than their physical health. Mental health in women with unwanted pregnancy is 9.19 times more likely to be reduced. Among mental health subscales, vitality (energy/fatigue) showed the highest decrease.

COUNTERMEASURE FOR MINIMIZE UNWANTED ALARM OF AUTOMATIC FIRE NOTIFICATION SYSTEM IN THE REPUBLIC OF KOREA

Directory of Open Access Journals (Sweden)

Hasung Kong

2015-01-01

Full Text Available In this article investigated the cause of error through survey to building officials for minimizing the unwanted alarm of automatic fire notification and suggested countermeasure for minimizing the unwanted alarm. The main cause of the unwanted alarm is defective fire detector, interlocking with automatic fire detection system, lack in fire safety warden’s ability, worn-out fire detect receiving system. The countermeasure for minimizing unwanted alarm is firstly, tightening up the standard of model approval, Secondly, interlocking with cross-section circuit method fire extinguishing system or realizing automatic fire notification system interlocking with home network, thirdly, tightening up licensing examination of fire safety warden, lastly, it suggested term of use rule of fire detect receiving system.

A comparison between girls' and boys' experiences of unwanted sexual behaviour in secondary schools

NARCIS (Netherlands)

Timmerman, G

Background This study examines gender differences (and similarities) in the context, meaning and effects of unwanted sexual behaviour in secondary schools. Purpose First, the study's purpose is exploration of variables that discriminate between girls' and boys' experiences of unwanted sexual

Relationship Between Unwanted Pregnancy And Health-related Quality Of Life In Pregnant Women

International Nuclear Information System (INIS)

Ali, A.

2016-01-01

Objective: To determine the relationship between unwanted pregnancy and health-related quality of life in pregnant women. Study Design: Case-control study. Place and Duration of Study: Department of Community Medicine, Kermanshah University of Medical Sciences, Kermanshah, Iran, from October 2013 to July 2014. Methodology: Of the pregnant women who presented to primary healthcare centers of Kermanshah, Iran to receive prenatal care at 6 - 10 weeks of their pregnancy, those with unwanted pregnancy were selected as cases and those with wanted pregnancy were selected as control group. The selection process was done using multi-stage stratified random sampling. Frequency matching was applied to match the two groups. Quality of life was measured by the SF-36 questionnaire and was compared by the t-test. Relationship power between pregnancy type (wanted or unwanted pregnancy) and impairment of quality of life subscales as the outcome was assessed using odds ratio (OR). Result: Frequency distribution of matched variables was not statistically different between the two studied groups. Mean scores of mental component summary and physical component summary as well as eight subscales (physical functioning, role, bodily pain, general health, vitality, social functioning, role emotional, and mental health) were lower in the unwanted pregnancy group compared to women with wanted pregnancy (p < 0.001). The highest high impairment odds ratio was highest for the mental component summary (MCS) (OR = 9.19; 95 percentage CI = 5.17- 16.32) and vitality subscale (OR = 5.2; 95 percentage CI = 2.89- 9.33). Conclusion: Mental health of the pregnant women with unwanted pregnancy is affected more than their physical health. Mental health in women with unwanted pregnancy is 9.19 times more likely to be reduced. Among mental health subscales, vitality (energy/fatigue) showed the highest decrease. (author)

A Risky Boundary: Unwanted Sexual Behaviour among Youth

Science.gov (United States)

de Bruijn, Paula; Burrie, Ingrid; van Wel, Frits

2006-01-01

The aim of this research was to explore unwanted sexual behaviour amongst young people. Sexual aggression was operationalized at three levels: "verbal", "non-verbal/intimidating" and "physically violent". A total of 1,700 Dutch adolescents completed a questionnaire that included six clusters of possible determinants…

COUNTERMEASURE FOR MINIMIZE UNWANTED ALARM OF AUTOMATIC FIRE NOTIFICATION SYSTEM IN THE REPUBLIC OF KOREA

Directory of Open Access Journals (Sweden)

Hasung Kong

2015-01-01

Full Text Available In this article investigated the cause of error through survey to building officials for minimizing the unwanted alarm of automatic fire notification and suggested countermeasure for minimizing the unwanted alarm. The main cause of the unwanted alarm is defective fire detector, interlocking with automatic fire detection system, lack in fire safety warden’s ability, worn-out fire detect receiving system. The countermeasure for minimizing unwanted alarm is firstly, tightening up the standard of model approval, Secondly, interlocking with cross-section circuit method fire extinguishing system or realizing automatic fire notification system interlocking with home network, thirdly, tightening up licensing examination of fire safety warden, lastly, it suggested term of use rule of fire detect receiving system. 

Determinants of unwanted pregnancies in India using matched case-control designs

Directory of Open Access Journals (Sweden)

Dixit Priyanka

2012-08-01

Full Text Available Abstract Background In India, while the total fertility rate has been declined from 3.39 in 1992–93 to 2.68 in 2005–06, the prevalence of unintended pregnancy is still stagnant over the same period. A review of existing literature shows that within the country, there are variations in fertility preferences between different regions. Also there is a strong argument that the availability of a health facility at the village level plays an important role in reshaping the fertility behavior of women. Keeping in mind the fact that there is no information at the village level (which is the lowest geographical boundary in the recent round of National Family Health Survey (NFHS-3, the specific objective of this study is to examine the impact of individual and household level variables on unwanted pregnancies without controlling the village level variation. Further, once the village level variation (i.e. unobserved variation has been controlled, it is necessary to study whether there has been any alteration in the contribution of factors from earlier results of without adjusting the village level variation. Methods This paper attempts to examine the associated factors of unwanted pregnancies, without matching the village and after matching the village, by using the matched case–control design. Nationwide data from India’s latest NFHS-3 conducted during 2005–06 was used for the present study. Frequency and pair wise matching has been applied in the present paper and conditional logistic regression analysis was used to work out the models and to find out the factors associated with unwanted pregnancies. Results A major finding of this study was that 1:3 case–control study (without matching the village shows that women belonging to non Hindu/Muslim religion, Scheduled Tribe, women who have experienced child loss and if the previous birth interval is 24 through 36 months were significant predictors of unwanted pregnancy. However, this

Unwanted sexual attention at work and long-term sickness absence: a follow-up register-based study.

Science.gov (United States)

Hogh, Annie; Conway, Paul Maurice; Clausen, Thomas; Madsen, Ida Elisabeth Huitfeldt; Burr, Hermann

2016-07-30

The current understanding of the relationship between unwanted sexual attention at work and long-term sickness absence (LTSA) is limited for three reasons: 1) the under-researched role of unwanted sexual attention perpetrated by individuals outside the work organization; 2) a widespread use of self-reported measures of sickness absence, with an unclear identification of sickness absence episodes of long duration; 3) the cross-sectional design of most existing studies. The aim of this study was therefore to investigate the relationship between self-reported unwanted sexual attention at work and subsequent LTSA (≥3 weeks), stratifying by gender and source of exposure (i.e., colleagues, managers and/or subordinates vs. clients/customers/patients). This prospective study is based on a pooled sample of 14,605 employees from three Danish surveys conducted in 2000, 2004 and 2005, providing a total of 19,366 observations. A single questionnaire-based item was used to assess exposure to unwanted sexual attention. The pooled dataset was merged with Danish register data on LTSA. The risk of first-onset episode of LTSA (up to 18 months after baseline) in connection with unwanted sexual attention was examined using Cox proportional hazards models. We estimated Hazard ratios (HR) and 95 % confidence intervals (95 % CI) adjusted for age, influence at work, work pace, occupational group and mode of data collection. We also adjusted for repeated measures from individual respondents by stratifying the Cox models by wave of survey. Unwanted sexual attention from colleagues, managers and/or subordinates predicted LTSA among men (HR 2.66; 95 % CI 1.42-5.00). Among women, an elevated but non-statistically significant risk of LTSA (HR 1.18; 95 % CI 0.65-2.14) was found. Unwanted sexual attention from clients/customers/patients did not predict LTSA, neither among men nor among women. The findings indicate a significantly elevated risk of LTSA, among men only, in relation to

Unwanted sexual attention at work and long-term sickness absence: a follow-up register-based study

Directory of Open Access Journals (Sweden)

Annie Hogh

2016-07-01

Full Text Available Abstract Background The current understanding of the relationship between unwanted sexual attention at work and long-term sickness absence (LTSA is limited for three reasons: 1 the under-researched role of unwanted sexual attention perpetrated by individuals outside the work organization; 2 a widespread use of self-reported measures of sickness absence, with an unclear identification of sickness absence episodes of long duration; 3 the cross-sectional design of most existing studies. The aim of this study was therefore to investigate the relationship between self-reported unwanted sexual attention at work and subsequent LTSA (≥3 weeks, stratifying by gender and source of exposure (i.e., colleagues, managers and/or subordinates vs. clients/customers/patients. Methods This prospective study is based on a pooled sample of 14,605 employees from three Danish surveys conducted in 2000, 2004 and 2005, providing a total of 19,366 observations. A single questionnaire-based item was used to assess exposure to unwanted sexual attention. The pooled dataset was merged with Danish register data on LTSA. The risk of first-onset episode of LTSA (up to 18 months after baseline in connection with unwanted sexual attention was examined using Cox proportional hazards models. We estimated Hazard ratios (HR and 95 % confidence intervals (95 % CI adjusted for age, influence at work, work pace, occupational group and mode of data collection. We also adjusted for repeated measures from individual respondents by stratifying the Cox models by wave of survey. Results Unwanted sexual attention from colleagues, managers and/or subordinates predicted LTSA among men (HR 2.66; 95 % CI 1.42-5.00. Among women, an elevated but non-statistically significant risk of LTSA (HR 1.18; 95 % CI 0.65-2.14 was found. Unwanted sexual attention from clients/customers/patients did not predict LTSA, neither among men nor among women. Conclusions The findings indicate a significantly

A risky boundary : Unwanted sexual behaviour among youth

NARCIS (Netherlands)

Bruijn, Paula de; Burrie, Ingrid; Wel, Frits van

2006-01-01

The aim of this research was to explore unwanted sexual behaviour amongs young people. Sexual aggression was operationalized at three levels: ‘‘verbal’’, ‘‘non-verbal/intimidating’’ and ‘‘physically violent’’. A total of 1,700 Dutch adolescents completed a questionnaire that included six clusters of

The co-occurrence of Internet harassment and unwanted sexual solicitation victimization and perpetration: associations with psychosocial indicators.

Science.gov (United States)

Ybarra, Michele L; Espelage, Dorothy L; Mitchell, Kimberly J

2007-12-01

Previous research in offline environments suggests that there may be an overlap in bullying and sexual harassment perpetration and victimization; however to what extent this may be true for perpetration and victimization of Internet harassment and unwanted sexual solicitation is unknown. The Growing Up with Media survey is a national cross-sectional online survey of 1,588 youth, 10-15 years old, who have used the Internet at least once in the last 6 months. Cluster analysis was conducted with four scales: Internet harassment perpetration, Internet harassment victimization, unwanted sexual solicitation perpetration, and unwanted sexual solicitation victimization. A four-cluster solution was identified: youth with little to no involvement (n = 1326; 81.7%); perpetrator-victims of Internet harassment (n = 205; 14.3%); victims of both Internet harassment and unwanted sexual solicitation (n = 45; 3.1%); and perpetrator-victims of Internet harassment and unwanted sexual solicitation (n = 12; .9%). Involvement in Internet harassment and unwanted sexual solicitation was associated with concurrent reports of psychosocial problems including substance use; involvement in offline victimization and perpetration of relational, physical, and sexual aggression; delinquent peers; a propensity to respond to stimuli with anger; poor emotional bond with caregivers; and poor caregiver monitoring as compared with youth with little to no involvement. This was especially true for perpetrator-victims of Internet harassment and unwanted sexual solicitation. Findings were replicated using a frequency-based definition of involvement, suggesting that cluster analysis is useful in identifying subgroups of youth and can be used to guide frequency-based definitions, which are easier to implement across study samples. The majority of youth are not frequently involved in Internet harassment or unwanted sexual solicitation either as victims or as perpetrators. Among those who are, however

Reflectance continuum removal spectral index tracking the xanthophyll cycle photoprotective reactions in Norway spruce needles

Czech Academy of Sciences Publication Activity Database

Kováč, Daniel; Navrátil, M.; Malenovský, Z.; Štroch, Michal; Špunda, Vladimír; Urban, Otmar

2012-01-01

Roč. 39, č. 12 (2012), s. 987-998 ISSN 1445-4408 R&D Projects: GA MŠk(CZ) ED1.1.00/02.0073; GA MŽP(CZ) SP/2D1/70/08 Institutional support: RVO:67179843 Keywords : diurnal course * growth chambers * photosynthetic pigments composition * Picea abies * reflectance continuum removal * xanthophyll cycle Subject RIV: EH - Ecology, Behaviour Impact factor: 2.471, year: 2012

Evaluation of the National Return of unwanted medicines (RUM) program in Australia: a study protocol.

Science.gov (United States)

Wheeler, Amanda J; Spinks, Jean; Bettington, Emilie; Kelly, Fiona

2017-01-01

The National Return of Unwanted Medicines (NatRUM) program in Australia is one of the few nationally coordinated, free-to-consumer schemes to dispose of unwanted medicines globally. This scheme has been in operation since 1996, however, little is known about public awareness of the scheme and its effectiveness in reducing unsafe disposal practices. The study objectives are to undertake a review of (1) the current use of the NatRUM scheme by consumers; and (11) to investigate disposal practices and beliefs of the general population. A two-stage, mixed-methods study will be undertaken. Stage One will include a nation-wide audit of a representative sample of unwanted medicine bins, collected by community pharmacies, for incineration. The audit will detail the type and amount of unwanted medicines collected and if they are subsidised on the national formulary (Pharmaceutical Benefits Scheme). Stage Two will include: (i) a large, representative, general population survey; and (ii) more detailed interviews with a sub-set of this sample, who take five or more medications. Results will quantitatively describe the awareness of the NatRUM scheme, disposal practices and the volume of unwanted medicines stored in the home. It will qualitatively describe beliefs and perceptions about storage and disposal practices. It is anticipated that this study will provide valuable insights about how Australians dispose of unwanted medicines, their awareness of the NatRUM scheme and how the scheme might be strengthened. Results will inform the Federal Department of Health and NatRUM Ltd. Board at a local level, as well as other countries who are yet to develop or implement coordinated disposal schemes. A number of challenges are expected, including ensuring the consistency of medicines terminology during the bin audit and recruiting a representative sample of Australians for the general population survey. Results of this study will be widely disseminated to support the translation of

Investigating social consequences of unwanted pregnancy and unsafe abortion in Malawi: the role of stigma.

Science.gov (United States)

Levandowski, Brooke A; Kalilani-Phiri, Linda; Kachale, Fannie; Awah, Paschal; Kangaude, Godfrey; Mhango, Chisale

2012-09-01

Malawian women in all sectors of society are suffering from social implications of unwanted pregnancy and unsafe abortion. Unwanted pregnancies occur among women who have limited access to family planning and safe abortion. A legally restrictive setting for safe abortion services leads many women to unsafe abortion, which has consequences for them and their families. In-depth interviews were conducted with 485 Malawian stakeholders belonging to different political and social structures. Interviewees identified the impact of unwanted pregnancy and unsafe abortion to be the greatest on young women. Premarital and extramarital pregnancies were highly stigmatized; stigma directly related to abortion was also found. Community-level discussions need to focus on reduction of stigma. Copyright © 2012 International Federation of Gynecology and Obstetrics. Published by Elsevier Ireland Ltd. All rights reserved.

Scaling up postabortion contraceptive service--results from a study conducted among women having unwanted pregnancies in urban and rural Tanzania

DEFF Research Database (Denmark)

Rasch, Vibeke; Yambesi, Fortunata; Kipingili, Rose

2005-01-01

Tanzania and 42% in rural Tanzania stated that their pregnancy was unwanted. Contraceptive acceptance among women with unwanted pregnancies was high; 93% in urban Tanzania and 71% in rural Tanzania left with a contraceptive method. CONCLUSION: The high proportion of women with unwanted pregnancies in urban...... and rural Tanzania underlines the need of scaling up postabortion contraceptive service....

Guided wave imaging of oblique reflecting interfaces in pipes using common-source synthetic focusing

Science.gov (United States)

Sun, Zeqing; Sun, Anyu; Ju, Bing-Feng

2018-04-01

Cross-mode-family mode conversion and secondary reflection of guided waves in pipes complicate the processing of guided waves signals, and can cause false detection. In this paper, filters operating in the spectral domain of wavenumber, circumferential order and frequency are designed to suppress the signal components of unwanted mode-family and unwanted traveling direction. Common-source synthetic focusing is used to reconstruct defect images from the guided wave signals. Simulations of the reflections from linear oblique defects and a semicircle defect are separately implemented. Defect images, which are reconstructed from the simulation results under different excitation conditions, are comparatively studied in terms of axial resolution, reflection amplitude, detectable oblique angle and so on. Further, the proposed method is experimentally validated by detecting linear cracks with various oblique angles (10-40°). The proposed method relies on the guided wave signals that are captured during 2-D scanning of a cylindrical area on the pipe. The redundancy of the signals is analyzed to reduce the time-consumption of the scanning process and to enhance the practicability of the proposed method.

Unwanted Sexual Attention in Licensed Venues: Considering LGBTIQ Young Adults’ Experiences and Perceptions

Directory of Open Access Journals (Sweden)

Bianca Fileborn

2015-12-01

Full Text Available Sexual violence within the lesbian, gay, bisexual, transgender/transsexual, intersex and queer (LGBTIQ communities remains largely under-researched and under-theorised. Yet, emerging research suggests that sexual violence is a significant issue within the LGBTIQ communities. Additionally, the occurrence of sexual violence and unwanted sexual attention within specific social and cultural contexts is, for the most part, insufficiently examined. This article draws on research exploring young LGBTIQ adults’ perceptions and experiences of unwanted sexual attention in licensed venues. Firstly, I consider the theoretical and conceptual underpinnings of ‘unwanted sexual attention’ as a category of analysis. I then move on to consider participants’ use of licensed venues, the particular significance of pubs and clubs to LGBTIQ young people, and their perceptions and experiences of unwanted sexual attention. Finally, I discuss the implications of these findings for theoretical and conceptual understandings of unwanted sexual attention and sexual violence. En general, se ha investigado y teorizado muy poco sobre la violencia sexual dentro de las comunidades de lesbianas, gays, bisexuales, transgénero / transexuales, intersex y queer (LGBTIQ. Sin embargo, investigaciones recientes sugieren que la violencia sexual es un problema importante en estas comunidades. Además, la incidencia de la violencia sexual y atención sexual no deseada dentro de contextos sociales y culturales específicos no está, en su mayor parte, suficientemente examinada. Este artículo se basa en la investigación de la percepción y experiencias de atención sexual no deseada en locales con licencia para vender alcohol. En primer lugar, se tienen en cuenta los fundamentos teóricos y conceptuales de “atención sexual no deseada” como una categoría de análisis. A continuación, se considera el uso de locales con licencia por parte de los participantes, el significado

Unwanted Tattoos

Science.gov (United States)

... Back Injectable Deoxycholic Acid Injectable Hyaluronic Acid Injectable Poly-l-lactic Acid Injectable Polymethylmethacrylate + Bovine Collagen Filler ... procedure? Does tattoo removal hurt? What are my pain management and anesthesia options? How long is the ...

Effect of a novel low-energy pulsed-light device for home-use hair removal.

Science.gov (United States)

Alster, Tina S; Tanzi, Elizabeth L

2009-03-01

Removal of unwanted hair is the most popular skin treatment worldwide. Over the past decade, various lasers and light sources for epilation have been advocated for use in an office setting, although most people continue to treat unwanted hair with a variety of temporary physical methods (e.g., waxing, shaving) in a home setting, presumably due to cost and convenience factors. To evaluate the safety and efficacy of a low-energy pulsed-light device intended for home-use hair removal. Twenty women (skin phototypes I-IV) with dark terminal hair in nonfacial sites (axilla, forearms, inguinal region, legs) self-administered three treatments at 2-week intervals using a handheld intense-pulsed-light device. Matched untreated skin sites were also studied. Hair counts and clinical photographs were obtained pretreatment and at 1, 3, and 6 months after the third treatment. Side effects and patient satisfaction scores were recorded. All patients showed a positive clinical response to treatment, with reduction of unwanted hair. No reduction of hair was noted in untreated matched areas. Hair counts were reduced 37.8% to 53.6% 6 months after the three treatments. Skin region influenced clinical response, with lower legs exhibiting greater hair reduction than arms and inguinal and axillary areas. Mild erythema was experienced in 25% of patients, but no other side effects or complications were encountered. Patient satisfaction scores were high, with all patients stating that they would purchase the device for future home use. CONCLUSIONS Low-energy pulsed light can be applied safely and effectively for at-home hair removal in a variety of nonfacial locations and skin phototypes I-IV.

Predictors of unwanted exposure to online pornography and online sexual solicitation of youth.

Science.gov (United States)

Chang, Fong-Ching; Chiu, Chiung-Hui; Miao, Nae-Fang; Chen, Ping-Hung; Lee, Ching-Mei; Chiang, Jeng-Tung

2016-06-01

This study examined factors associated with the unwanted exposure to online pornography and unwanted online sexual solicitation victimization and perpetration of youth in Taiwan. A total of 2315 students from 26 high schools were assessed in the 10th grade, with follow-up performed in the 11th grade. Self-administered questionnaires were collected. Multivariate analysis results indicated that higher levels of online game use, pornography media exposure, Internet risk behaviors, depression, and cyberbullying experiences predicted online sexual solicitation victimization, while higher levels of Internet chat room use, pornography media exposure, Internet risk behaviors, cyberbullying experiences, and offline sexual harassment predicted online sexual solicitation perpetration. © The Author(s) 2014.

Adolescents' psychological health and experiences with unwanted sexual behavior at school

NARCIS (Netherlands)

Timmerman, G

2004-01-01

This paper examines the relationship between experiences with unwanted sexual behavior at school and adolescents' health. Adolescent boys and girls (N = 2,808) participated in a 1998/1999 survey of secondary school students in two regions of The Netherlands. The psychological issues investigated

Factors Affecting Unwanted Pregnancies in Urban Areas of Kohgiloyeh and Boyer Ahmad Province in 2008

Directory of Open Access Journals (Sweden)

Z Tabeshfar

2011-08-01

Full Text Available Introduction & Objective: Unwanted pregnancies and its complications are one of the most important global problems related to mothers. The aim of the present study was to determine the factors affecting unwanted pregnancies in urban areas of the Kohgiloyeh and Boyer Ahmad province. Materials & Methods: In this case – control study conducted at Yasuj University of Medical Sciences in 2008 ,350 women were chosen as the case group, and 700 women as the control group. During the study, data collection forms were completed by each group. Subsequently, the collected data was analyzed using SPSS version 16 by using the logistic regression, univariate, and multivariate analysis. Results: According to the results of univariate analysis, the variables husband’s education in primary school , age of the last child under one, uncertain prevention methods and receiving means of prevention from the private sector revealed that significant differences existed between the two groups (P Value<0/05. Finally, the multivariate analysis beetwen husband education variables, age of the last child , prevention methods, and receiving a contraceptive device, a significant correlation was observed with unwanted pregnancy(P Value<0/05. Conclusion: Results of this study determined that three variables (contraceptive method, the place of obtaining means, and level of her husband education are the most important variables which affect the chance of increasing of unwanted pregnancy in users of contraceptive methods.

Sexual Orientation Disparities in Mistimed and Unwanted Pregnancy Among Adult Women.

Science.gov (United States)

Everett, Bethany G; McCabe, Katharine F; Hughes, Tonda L

2017-09-01

Many sexual minority women, regardless of sexual identity, engage in heterosexual behavior across the life course, which provides them opportunities to experience an unintended pregnancy. In addition, sexual minority women are more likely than others to report characteristics that may make them vulnerable to unintended pregnancy. Little research, however, has examined whether the risk of unintended pregnancy is elevated among these women. Using data from the 2006-2010 National Survey of Family Growth, logistic regression models were fitted to examine sexual orientation disparities in mistimed and unwanted pregnancies among 9,807 women aged 20-45; mixed-effects hazard models assessed disparities in the intention status of 5,238 pregnancies among these women by maternal sexual orientation. Compared with heterosexual women reporting only male partners, heterosexual women who have sex with women had higher odds of reporting a mistimed pregnancy (odds ratio, 1.4), and bisexual women had higher odds of reporting an unwanted pregnancy (1.8). When compared with pregnancies reported by heterosexual women with only male partners, those reported by heterosexual women who have sex with women were more likely to be mistimed (hazard ratio, 1.7), and those reported by bisexual and lesbian women were more likely to be unwanted (1.7-4.4). Compared with heterosexuals who have sex with men only, adult sexual minority women are at equal or greater risk of reporting an unintended pregnancy. More research addressing the reproductive health care needs of sexual minority women is needed to develop strategies to improve family planning for this population. Copyright © 2017 by the Guttmacher Institute.

Photodynamic therapy for hair removal

Directory of Open Access Journals (Sweden)

Mohamed H. M. Ali

2013-05-01

Full Text Available Background: Unwanted hair is one of the most common medical problems affecting women of reproductive age inducing a lot of psychological stress and threatening their femininity and self-esteem. Old methods of removing unwanted hair include shaving, waxing, chemical depilation, and electrolysis, all of which have temporary results. However laser-assisted hair removal is the most efficient method of long-term hair removal currently available. It is desirable to develop a reduced cost photodynamic therapy (PDT system whose properties should include high efficiency and low side-effects. Method: Mice skin tissues were used in this study and divided into six groups such as controls, free methylene blue (MB incubation, liposome methylene blue (MB incubation, laser without methylene blue (MB, free methylene blue (MB for 3 and 4 hrs and laser, liposome methylene blue (MB for 3 hrs and laser. Methylene blue (MBwas applied to wax epilated areas. The areas were irradiated with CW He-Ne laser system that emits orange-red light with wavelength 632.8 nm and 10 mW at energy density of 5 J/ cm2 for 10 minutes. The UV-visible absorption spectrum was collected by Cary spectrophotometer. Results: Methylene blue (MB is selectively absorbed by actively growing hair follicles due to its cationic property. Methylene blue (MBuntreated sections showed that hair follicle and sebaceous gland are intact and there is no change due to the laser exposure. Free methylene blue (MB sections incubated for 3 hrs showed that He:Ne laser induced destruction in hair follicles, leaving an intact epidermis. Treated section with free methylene blue (MB for 4 hrs showed degeneration and necrosis in hair follicle, leaving an intact epidermis. Liposomal methylene blue (MB sections incubated for 3 hrs showed He:Ne laser induced destruction in hair follicles with intradermal leucocytic infiltration. Conclusions: Low power CW He:Ne laser and methylene blue (MB offered a successful PDT system

Unintended and unwanted pregnancy in St. Lucia.

Science.gov (United States)

Denton, A B; Chase, W M; Scott, K

1994-09-01

Among 200 mothers interviewed in St. Lucia, 82.5% described their pregnancy as unintended and 44% as unwanted; 80% of women having an intended pregnancy and 94.6% having an unintended pregnancy were unmarried and 18.5% were teenagers. Mothers of unintended pregnancies were significantly younger, were of significantly higher parity and had begun sexual relations at a significantly earlier age than mothers of intended pregnancies; and, unlike mothers of planned pregnancies, their desired interpregnancy interval was significantly longer than the actual interval. These results and the sporadic and ineffective use of contraception in St. Lucia emphasize the need for improvements in fertility regulation in that country.

Removing left-right asymmetry in a Sagnac interferometer applied to cancel its reflectance dependence on birefringence.

Science.gov (United States)

Golub, Ilya; Exir, Hourieh

2013-05-01

We present a left-right symmetry restoring method, which removes the detrimental birefringence in the single-mode fiber Sagnac interferometer, achieved with the aid of a half waveplate oriented at a specific angle. We show theoretically and demonstrate experimentally that adding a π-shift between clockwise and counterclockwise propagating, horizontally (in fiber loop plane) polarized field components, the Sagnac loop mirror's reflection becomes independent on birefringence of an element placed in the loop.

Unwanted horses: The role of nonprofit equine rescue and sanctuary organizations.

Science.gov (United States)

Holcomb, K E; Stull, C L; Kass, P H

2010-12-01

Closure of US equine slaughter facilities in 2007 along with the concomitant economic recession have contributed to a sharp increase in the number of unwanted horses throughout the United States, with estimates totaling 100,000 horses per year. The objective of the study was to obtain comprehensive data regarding nonprofit organizations caring for unwanted horses, along with the characteristics and outcome of horses relinquished to these organizations. Nonprofit organizations that accept relinquished equines were contacted to participate in a 90-question survey. Responding organizations (144 of 326 eligible) in 37 states provided information on 280 cases representative of the 7,990 horses relinquished between 2007 and 2009. Data collected characterized these organizations as being in existence for 6 yr, financially supported through donations and personal funds, dedicated to the care of only 10 to 20 horses on a property of just over 30 acres, and reliant on volunteers for help. Funding was the greatest challenge to continued operation of nonprofit equine organizations, with maintenance costs for the care of a relinquished horse averaging $3,648 per year. Financial hardship, physical inability, or lack of time to care for the horses by owners were the most common reasons for relinquishment, followed by seizure through law enforcement agencies for alleged neglect or abuse. Relinquished horses consisted of mostly light horse breeds (79.3%), with Thoroughbreds and Quarter Horses as the most represented breeds. The age of relinquished horses ranged from 3 d to 42 yr old (12.4 ± 0.5 yr). About one-half of the horses entered in the survey were considered unhealthy due to illness, injury, lameness, or poor body condition. For every 4 horses relinquished to a nonprofit organization, only 3 horses were adopted or sold between 2006 and 2009, and many organizations had refused to accept additional horses for lack of resources. The estimated maximum capacity for the 326

Adolescents' Psychological Health and Experiences with Unwanted Sexual Behavior at School

Science.gov (United States)

Timmerman, Greetje

2004-01-01

This paper examines the relationship between experiences with unwanted sexual behavior at school and adolescents' health. Adolescent boys and girls (N = 2,808) participated in a 1998/1999 survey of secondary school students in two regions of The Netherlands. The psychological issues investigated included psychosomatic problems and self-esteem. It…

[Unwanted adolescent pregnancy and post-partum utilization of contraceptive methods].

Science.gov (United States)

Núñez-Urquiza, Rosa María; Hernández-Prado, Bernardo; García-Barrios, Cecilia; González, Dolores; Walker, Dylis

2003-01-01

To describe the proportion of unwanted pregnancies among all pregnant adolescents, its association with sociodemographic characteristics, and the use of post-partum contraceptive methods. A cross-sectional study was conducted among 220 women between 13 and 19 years of age, in two semi-urban municipalities of the State of Morelos, Mexico, interviewed between 1992 and 1994. Women were interviewed at home, six to twelve weeks after their delivery date. Women were asked whether they had wanted their last pregnancy, and about knowledge and use of contraceptive methods after delivery. Adolescent pregnancies accounted for 17% of all births registered in these two municipalities. Among all adolescent mother 22.73% reported that their pregnancy had not been wanted. A positive association was found between the lack of access to health services provided by public medical insurance systems (Instituto Mexicano del Seguro Social IMSS and Instituto de Seguridad y Servicios Sociales para los Trabajadores del Estado ISSSTE) and unwanted pregnancy (adjusted OR = 3.03, 95% CI (1.31, 7.) An association was also found between living in an urban community (adjusted OR = 2.16, 95% CI (1.08, 4.33) and an unwanted pregnancy. Among all adolescent mothers, 91.3% were familiar with "the pill" as a contraceptive method; 84.72% knew about the IUD, and 63.68% knew about the condom. However, only 35% of them were actually using an effective contraceptive method six weeks after delivery. No difference in frequency of contraceptive use was found among the adolescent mothers, according to whether they wanted their last pregnancy. Only 43.39% of mothers who delivered at hospitals or health centers were using an effective contraceptive method. These findings suggest that there is a great potential for family planning programs to target adolescents, and that the use of contraceptive methods after delivery should be promoted among adolescent mothers, especially those lacking access to public medical

The role of poor sleep in the relation between workplace bullying/unwanted sexual attention and long-term sickness absence.

Science.gov (United States)

Nabe-Nielsen, Kirsten; Grynderup, Matias Brødsgaard; Lange, Theis; Andersen, Johan Hviid; Bonde, Jens Peter; Conway, Paul Maurice; Garde, Anne Helene; Høgh, Annie; Kaerlev, Linda; Rugulies, Reiner; Hansen, Åse Marie

2016-08-01

While exposure to bullying and unwanted sexual attention was previously found to increase the risk of sickness absence, the underlying mechanisms are largely unknown. Poor sleep can be a consequence of stressful exposures and a cause of poor health, and poor sleep is also a determinant of insufficient recovery. Therefore, the present study investigated whether poor sleep mediates and/or moderates the association between bullying and unwanted sexual attention, on the one hand, and long-term sickness absence (LTSA), on the other hand. We used questionnaire data from 7650 individuals contributing with 15,040 2-year observation periods. Workplace bullying, unwanted sexual attention, disturbed sleep, and difficulties awakening were measured at three time points, and participants were followed in registers to measure the occurrence of LTSA, defined as ≥30 consecutive days of sickness absence during the subsequent 2 years. The odds of LTSA were significantly increased by workplace bullying (OR 1.77; 95 % CI 1.50-2.12) and unwanted sexual attention (OR 1.55; 95 % CI 1.06-2.29). Together, disturbed sleep and difficulties awakening mediated 12.8 % (95 % CI 8.1-19.8) of the association between bullying and long-term sickness absence, and 8.5 % (95 % CI -0.45 to 37.1) of the association between unwanted sexual attention and long-term sickness absence in the fully adjusted model. Neither disturbed sleep nor difficulties awakening moderated these associations. As expected, bullying and unwanted sexual attention were prospectively associated with long-term sickness absence. Only a small part of this association was mediated by poor sleep.

Multi-site and multi-depth in vivo cancer localization enhancement after auto-fluorescence removal

International Nuclear Information System (INIS)

Montcuquet, A.S.; Herve, L.; Navarro, F.; Dinten, J.M.; Mars, J.I.

2011-01-01

Fluorescence imaging in diffusive media locates tumors tagged by injected fluorescent markers in NIR wavelengths. For deep embedded markers, natural auto-fluorescence of tissues comes to be a limiting factor to tumor detection and accurate FDOT reconstructions. A spectroscopic approach coupled with Non-negative Matrix Factorization source separation method is explored to discriminate fluorescence sources according to their fluorescence spectra and remove unwanted auto-fluorescence. We successfully removed auto-fluorescence from acquisitions on living mice with a single subcutaneous tumor or two capillary tubes inserted at different depths. (authors)

Characteristics of Women with Unwanted Pregnancies and Reasons for Contraceptive Methods Discontination: Sample of Rural Area

Directory of Open Access Journals (Sweden)

Semra Ay

2012-06-01

Full Text Available AIM: The aim of the study was to explore the prevalence and characteristics of women with unwanted pregnancy in rural area and to examine pregnant women’s contraceptive method preferences, satisfaction with the methods and reason the methods discontinuation. METHOD: This study was carried out in Manisa city rural area between the dates of January and June 2011 in women who agreed to participate in the study. The sample of the research is composed of 239 pregnant women. The research was a descriptive, cross-sectional and field study and the data was collected by using questionnaire which was prepared by researcher. Data was gathered through the face to face interview with the women at their home. Statistical analyses were undertaken using SPSS version 11.5. Descriptive analysis, Pearson’s Chi-square (χ² test, fisher exact test, and t-test were used statistical evaluation. RESULTS: Of the 239 pregnancies, 64 (26.8% were unwanted pregnancies. The mean age of women was respectively 25.0±5.0, and 29.0±5.4 years, for wanted, and unwanted pregnancies. Women with unwanted pregnancies were older, less educated, they had less educated husbands, had low income level, had more pregnancies, deliveries, had less than two years interval between their births. Unwanted pregnancies were observed in women using the coitus interrupts method (%53.1, effective contraceptive methods (%54.3 and not using any method (%16.3 (p<0.05. The most reasons for discontinuation were reported pregnant women as follows: side effects of methods, disapproval for husband, pregnancy occurs using the method, believe for ineffective contraceptive methods. CONCLUSION: In order to reduce the number of unwanted pregnancies and wanted abortions which reversely affect the women healthy; an appropriate contraception method must be employed. Health care providers should identify women with unwanted pregnancy to understand women's concerns and experiences using contraception. This

"Come on Baby. You Know I Love You": African American Women's Experiences of Communication with Male Partners and Disclosure in the Context of Unwanted Sex.

Science.gov (United States)

Gutzmer, Kyle; Ludwig-Barron, Natasha T; Wyatt, Gail E; Hamilton, Alison B; Stockman, Jamila K

2016-05-01

We examined African American women's experiences of communication with their male intimate partners a couple of hours before and after an incident of unwanted sex. We also examined women's experiences of disclosure following an incident of unwanted sex. Semi-structured qualitative interviews were conducted with a community-based sample of sexually active African American women (n = 19) reporting at least one incident of sexual coercion (i.e., being pressured into unwanted sex without consent) by an intimate male partner since the age of 18. Our analysis was guided by "the sexual division of power" from Connell's (1987) theory of gender and power. Data were analyzed inductively by examining the interviews for common themes in the following domains: communication before the unwanted sex, communication after the unwanted sex, and disclosure to others. Men pressured partners for unwanted sex through verbal and non-verbal tactics, ranging from pestering and blunt requests for sex to verbal bullying and violence. Many women responded by clearly saying no. However, many women also described eventually ceasing to resist their partners and engaging in unwanted sex. After the unwanted sex, men actively and passively avoided discussing the incident. Although many women discussed the unwanted sex with family and friends, less women disclosed to trained professionals. In some cases, women did not discuss the incident with anyone at all. These findings indicate that, when addressing sexual violence against women, there is a need to target men as well as the norms of masculinity that underpin physical and sexual violence against women.

Removal of alum from Iron-Age wooden objects by an applied electric field

DEFF Research Database (Denmark)

Christensen, Iben Vernegren; Ottosen, Lisbeth M.; Jensen, Poul

2010-01-01

In this paper removal of potassium, sulfate and aluminum ions from waterlogged alum treated wood with the use of an applied electric field is described. An electric DC field was applied across the wood for 4-20 days. At the end of the experiments sulfate had moved as expected towards the anode...... was not obtained in the experiments reported here, but the high conductivity and the transport of the measured ions due to the electric field indicates that an applied electric field as a method for removal of alum and other unwanted ions from treated wooden objects warrants further investigation....

Apparatus and process for removing a predetermined portion of reflective material from mirror

Science.gov (United States)

Perry, Stephen J.; Steinmetz, Lloyd L.

1994-01-01

An apparatus and process are disclosed for removal of a stripe of soft reflective material of uniform width from the surface of a mirror by using a blade having a large included angle to inhibit curling of the blade during the cutting operation which could result in damage to the glass substrate of the mirror. The cutting blade is maintained at a low blade angle with respect to the mirror surface to produce minimal chipping along the cut edge and to minimize the force exerted on the coating normal to the glass surface which could deform the flat mirror. The mirror is mounted in a cutting mechanism containing a movable carriage on which the blade is mounted to provide very accurate straightness of the travel of the blade along the mirror.

Obtaining local reflectivity at two-way travel time by filtering acoustic reflection data

NARCIS (Netherlands)

Slob, E.C.; Zhang, L.; Wapenaar, C.P.A.; Mihai Popovici, A.; Fomel, S.

2017-01-01

A modified implementation of Marchenko redatuming leads to a filter that removes internal multiples from reflection data. It produces local reflectivity at two-way travel time. The method creates new primary reflections resulting from emitted events that eliminate internal multiples. We call these

Suppressing Unwanted Autobiographical Memories Reduces Their Automatic Influences: Evidence From Electrophysiology and an Implicit Autobiographical Memory Test.

Science.gov (United States)

Hu, Xiaoqing; Bergström, Zara M; Bodenhausen, Galen V; Rosenfeld, J Peter

2015-07-01

The present study investigated the extent to which people can suppress unwanted autobiographical memories in a memory-detection context involving a mock crime. Participants encoded sensorimotor-rich memories by enacting a lab-based crime (stealing a ring) and received instructions to suppress memory of the crime in order to evade guilt detection in a brain-wave-based concealed-information test. Aftereffects of suppression on automatic memory processes were measured in an autobiographical Implicit Association Test. Results showed that suppression attenuated brain-wave activity (the P300) associated with crime-relevant memory retrieval, which rendered waveforms from innocent and guilty participants indistinguishable. However, the two groups could nevertheless be discriminated via the late-posterior-negative slow wave, which may reflect the need to monitor response conflict arising between voluntary suppression and automatic recognition processes. Finally, extending recent findings that suppression can impair implicit memory processes, we provide novel evidence that suppression reduces automatic cognitive biases often associated with actual autobiographical memories. © The Author(s) 2015.

Abortion and Crime: Unwanted Children and Out-of-Wedlock Births

OpenAIRE

John R. Lott, Jr.; John Whitley

2001-01-01

Abortion may prevent the birth of ''unwanted'' children, who would have relatively small investments in human capital and a higher probability of crime. On the other hand, some research suggests that legalizing abortion increases out-of-wedlock births and single parent families, which implies the opposite impact on investments in human capital and thus crime. The question is: what is the net impact? We find evidence that legalizing abortion increased murder rates by around about 0.5 to 7 perc...

Neuroticism explains unwanted variance in Implicit Association Tests of personality: Possible evidence for an affective valence confound

Directory of Open Access Journals (Sweden)

Monika eFleischhauer

2013-09-01

Full Text Available Meta-analytic data highlight the value of the Implicit Association Test (IAT as an indirect measure of personality. Based on evidence suggesting that confounding factors such as cognitive abilities contribute to the IAT effect, this study provides a first investigation of whether basic personality traits explain unwanted variance in the IAT. In a gender-balanced sample of 204 volunteers, the Big-Five dimensions were assessed via self-report, peer-report, and IAT. By means of structural equation modeling, latent Big-Five personality factors (based on self- and peer-report were estimated and their predictive value for unwanted variance in the IAT was examined. In a first analysis, unwanted variance was defined in the sense of method-specific variance which may result from differences in task demands between the two IAT block conditions and which can be mirrored by the absolute size of the IAT effects. In a second analysis, unwanted variance was examined in a broader sense defined as those systematic variance components in the raw IAT scores that are not explained by the latent implicit personality factors. In contrast to the absolute IAT scores, this also considers biases associated with the direction of IAT effects (i.e., whether they are positive or negative in sign, biases that might result, for example, from the IAT’s stimulus or category features. None of the explicit Big-Five factors was predictive for method-specific variance in the IATs (first analysis. However, when considering unwanted variance that goes beyond pure method-specific variance (second analysis, a substantial effect of neuroticism occurred that may have been driven by the affective valence of IAT attribute categories and the facilitated processing of negative stimuli, typically associated with neuroticism. The findings thus point to the necessity of using attribute category labels and stimuli of similar affective valence in personality IATs to avoid confounding due to

The role of poor sleep in the relation between workplace bullying/unwanted sexual attention and long-term sickness absence

DEFF Research Database (Denmark)

Nabe-Nielsen, Kirsten; Grynderup, Matias Brødsgaard; Lange, Theis

2016-01-01

Purpose: While exposure to bullying and unwanted sexual attention was previously found to increase the risk of sickness absence, the underlying mechanisms are largely unknown. Poor sleep can be a consequence of stressful exposures and a cause of poor health, and poor sleep is also a determinant...... of insufficient recovery. Therefore, the present study investigated whether poor sleep mediates and/or moderates the association between bullying and unwanted sexual attention, on the one hand, and long-term sickness absence (LTSA), on the other hand. Methods: We used questionnaire data from 7650 individuals...... contributing with 15,040 2-year observation periods. Workplace bullying, unwanted sexual attention, disturbed sleep, and difficulties awakening were measured at three time points, and participants were followed in registers to measure the occurrence of LTSA, defined as ≥30 consecutive days of sickness absence...

Unwanted detachment of the Solitaire device during mechanical thrombectomy in acute ischemic stroke.

Science.gov (United States)

Castaño, C; Dorado, L; Remollo, S; García-Bermejo, P; Gomis, M; Pérez de la Ossa, N; Millán, M; García-Sort, M R; Hidalgo, C; López-Cancio, E; Cubells, C; Dávalos, A

2016-01-27

The use of retrievable stents for endovascular clot retrieval has dramatically improved successful revascularization and clinical outcome in selected patients with acute stroke. To describe the rate and clinical consequences of unwanted spontaneous detachment of these devices during mechanical thrombectomy. We studied 262 consecutive patients treated with the retrievable stent, Solitaire, for acute ischemic stroke between November 2008 and April 2015. Clinical, procedural, and outcome variables were compared between patients with and without unexpected detachment of this device. Detachment was classified as proximal to the stent proximal marker (type A) or distal to the marker (type B). Poor functional outcome was defined as modified Rankin scale score >2 at 90 days. Unwanted detachment occurred in 6/262 (2.3%) cases, four of type A and two of type B. Stent recovery was possible in three patients, all of 'type A', but in none of 'type B'. The number of prior passes was higher in patients with undesired detachment (3 (2-5) vs 2 (1-3), p=0.007). Detachment was associated with higher rate of symptomatic intracranial hemorrhage (SICH) (33.3% vs 4.3%, p=0.001), poorer outcome (100% vs 54.8%, p=0.028), and higher mortality rate at 90 days (50% vs 17%, p=0.038). Unwanted detachment of a Solitaire is an uncommon complication during mechanical thrombectomy in patients with acute ischemic stroke and is associated with the clot retrieval attempts, SICH, poor outcome, and higher mortality. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

Microbial Communities in Danish Wastewater Treatment Plants with Nutrient Removal

DEFF Research Database (Denmark)

Mielczarek, Artur Tomasz

Activated sludge treatment plants are the most used wastewater treatment systems worldwide for biological nutrient removal from wastewater. Nevertheless, the treatment systems have been for many years operated as so called “black-box”, where specific process parameters were adjusted without...... that plants with return sludge Side-Stream Hydrolysis (SSH) instead of the normal anaerobic process tank tended to have significantly fewer unwanted GAOs in contrast to many plants with traditional mainstream anaerobic tank and thus it was proposed that this system might be an effective strategy of control...

Risk factors for unplanned and unwanted teenage pregnancies occurring over two years of follow-up among a cohort of young South African women.

Science.gov (United States)

Christofides, Nicola J; Jewkes, Rachel K; Dunkle, Kristin L; McCarty, Frances; Jama Shai, Nwabisa; Nduna, Mzikazi; Sterk, Claire

2014-01-01

Although teenage pregnancies in South Africa have declined, the short and longer term health and social consequences are a potential public health concern. This longitudinal study aimed to describe the range of risk and protective factors for incident unwanted and unplanned pregnancies occurring over 2 years of follow-up among a cohort of adolescent women in the Eastern Cape, South Africa. It also investigated the relationship between gender inequality and gender-based violence and subsequent unplanned and unwanted pregnancies among the cohort. Teenage girls, aged 15-18 years (n=19), who were volunteer participants in a cluster randomized controlled trial and who had data from at least one follow-up were included in this analysis. To assess risk and protective factors for incident unwanted or unplanned pregnancies, we constructed multivariate polytomous regression models adjusting for sampling clusters as latent variables. Covariates included age, having a pregnancy prior to baseline, education, time between interviews, study intervention arm, contraceptive use, experience of intimate partner violence, belief that the teenage girl and her boyfriend are mutual main partners, and socioeconomic status. Overall, 174 pregnancies occurred over the 2-year follow-up period. Beliefs about relationship control were not associated with unwanted and unplanned pregnancies, nor were experiences of forced first sex or coerced sex under the age of 15. Hormonal contraception was protective against unplanned pregnancies (OR 0.40; 95% CI 0.21-0.79); however, using condoms was not protective. Physical abuse (OR 1.69; 95% CI 1.05-2.72) was a risk factor for, and having a pregnancy prior to baseline was protective against an unwanted pregnancy (OR 0.25; 95% CI 0.07-0.80). Higher socioeconomic status was protective for both unplanned and unwanted pregnancies (OR 0.69; 95% CI 0.58-0.83 and OR 0.78; 95% CI 0.64-0.96). Believing that the teenage girl and her boyfriend were mutual main

Risk factors for unplanned and unwanted teenage pregnancies occurring over two years of follow-up among a cohort of young South African women

Directory of Open Access Journals (Sweden)

Nicola J. Christofides

2014-08-01

Full Text Available Background: Although teenage pregnancies in South Africa have declined, the short and longer term health and social consequences are a potential public health concern. This longitudinal study aimed to describe the range of risk and protective factors for incident unwanted and unplanned pregnancies occurring over 2 years of follow-up among a cohort of adolescent women in the Eastern Cape, South Africa. It also investigated the relationship between gender inequality and gender-based violence and subsequent unplanned and unwanted pregnancies among the cohort. Objective: Teenage girls, aged 15–18 years (n=19, who were volunteer participants in a cluster randomized controlled trial and who had data from at least one follow-up were included in this analysis. To assess risk and protective factors for incident unwanted or unplanned pregnancies, we constructed multivariate polytomous regression models adjusting for sampling clusters as latent variables. Covariates included age, having a pregnancy prior to baseline, education, time between interviews, study intervention arm, contraceptive use, experience of intimate partner violence, belief that the teenage girl and her boyfriend are mutual main partners, and socioeconomic status. Results: Overall, 174 pregnancies occurred over the 2-year follow-up period. Beliefs about relationship control were not associated with unwanted and unplanned pregnancies, nor were experiences of forced first sex or coerced sex under the age of 15. Hormonal contraception was protective against unplanned pregnancies (OR 0.40; 95% CI 0.21–0.79; however, using condoms was not protective. Physical abuse (OR 1.69; 95% CI 1.05–2.72 was a risk factor for, and having a pregnancy prior to baseline was protective against an unwanted pregnancy (OR 0.25; 95% CI 0.07–0.80. Higher socioeconomic status was protective for both unplanned and unwanted pregnancies (OR 0.69; 95% CI 0.58–0.83 and OR 0.78; 95% CI 0.64–0.96. Believing

Acoustics in Research Facilities--Control of Wanted and Unwanted Sound. Laboratory Design Notes.

Science.gov (United States)

Newman, Robert B.

Common and special acoustics problems are discussed in relation to the design and construction of research facilities. Following a brief examination of design criteria for the control of wanted and unwanted sound, the technology for achieving desired results is discussed. Emphasis is given to various design procedures and materials for the control…

A comparison between unwanted sexual behavior by teachers and by peers in secondary schools

NARCIS (Netherlands)

Timmerman, M.C.

2002-01-01

This study explores differences and similarities between sexual harassment of students by teachers and by peers. Respondents were adolescents in 22 secondary schools, randomly selected in 2 regions in the Netherlands. Of the 2808 students 512 (18%) reported unwanted sexual experiences at school in

More Power, Less SympathyThe Response of IGOs in Western Europe to Unwanted Migration during Economic Crises Compared

Directory of Open Access Journals (Sweden)

Irial Glynn

2012-08-01

Full Text Available This article chronicles the influence of intergovernmental organisations (IGOs over unwanted migration in Western Europe since the 1930s. It pays particular attention to what occurred during times of economic crisis, especially the Great Depression in the 1930s, the recession-hit 1970s and early 1980s, and the current global financial difficulties. The IGOs under consideration are the League of Nations during the 1930s and the European Commission from the 1970s onwards. The European Commission’s ability to influence West European states’ policies on unwanted migration has grown considerably since the League of Nations’ unsuccessful attempts in the 1930s, especially in the lead-up to the current economic crisis. This increase in power has been offset, however, by a decrease in the European Commission’s sympathy as Brussels increasingly regards unwanted migration as a security and justice issue rather than as a social and cultural one in a move that bears close resemblance to the stance of West European states.

A new theory and its application to remove the effect of surface-reflected light in above-surface radiance data from clear and turbid waters

International Nuclear Information System (INIS)

Dev, Pravin Jeba; Shanmugam, Palanisamy

2014-01-01

Water-leaving radiances (L w ) measured from the deck of a ship or boat in oceanic and lake waters are widely and operationally used for satellite sensor vicarious calibration and validation and development of remote-sensing algorithms to understand interdisciplinary coastal ocean properties and processes. However, accurate determination of L w remains to be a challenging issue because of the limitations of the existing methods to accurately remove the undesired signal (surface-reflected light of the sky and sun) from above-surface measurements of the total upwelling radiance leaving the water surface. In this study, a new theory is developed and applied to the above-surface radiometric data measured from clear, turbid and eutrophic waters. The new method effectively removes surface-reflected contributions from the total upwelling radiance signal under different sky (clear sky to overcast sky) and sun glint conditions. The L w spectra obtained from the above-surface radiance data using the new method are found to match well with those extrapolated from the upwelling radiances (L u ) measured with another set of underwater radiometers (used just below the sea surface). The new method proves to be a viable alternative, especially in circumstances when the above-surface measurements of radiances are severally contaminated by the surface-reflected light fields. Since spectral radiance measurements are also sensitive to the observation angles, and to the magnitude of the radiometer's solid angle field of view, above-surface radiances are also measured for different viewing angles in highly eutrophic waters. Such measurements show large deviations in L w spectra except at lower viewing angles (30°). When applied to these data, the new method eliminates the undesired signal encountered at higher viewing angles and delivers accurate water-leaving radiance data. These results suggest that the new method is capable of removing the surface-reflected light fields from both

Unwanted pregnancies and Contraception in Chronic Renal Failure: A Case Report and Review of the Literature

Directory of Open Access Journals (Sweden)

Batuhan Özmen

2006-06-01

Full Text Available Pregnancy is a rare condition in patients requiring dialysis with end-stage chronic renal disease (CRD. However successful pregnancies were reported in CRD, patients are encountering with great number of complications and aggressive acceleration\tof CRD by achieving pregnancy. The most crucial topic is unwanted pregnancies of these patients due to high complication rates described in the literature. Thus many authors were discussing safety of contraception in CRD patients requiring dialysis (hemodialysis, peritoneal dialysis and in patients with renal transplant. In this report medical termination of a twenty-two weeks gestational age unwanted pregnancy that was complicated with aggressive hypertension and severe renal insufficiency under\tdialysis in a 38 years-old end-stage CRD patient was reported.

PSA-NCAM-Negative Neural Crest Cells Emerging during Neural Induction of Pluripotent Stem Cells Cause Mesodermal Tumors and Unwanted Grafts

Science.gov (United States)

Lee, Dongjin R.; Yoo, Jeong-Eun; Lee, Jae Souk; Park, Sanghyun; Lee, Junwon; Park, Chul-Yong; Ji, Eunhyun; Kim, Han-Soo; Hwang, Dong-Youn; Kim, Dae-Sung; Kim, Dong-Wook

2015-01-01

Summary Tumorigenic potential of human pluripotent stem cells (hPSCs) is an important issue in clinical applications. Despite many efforts, PSC-derived neural precursor cells (NPCs) have repeatedly induced tumors in animal models even though pluripotent cells were not detected. We found that polysialic acid-neural cell adhesion molecule (PSA-NCAM)− cells among the early NPCs caused tumors, whereas PSA-NCAM+ cells were nontumorigenic. Molecular profiling, global gene analysis, and multilineage differentiation of PSA-NCAM− cells confirm that they are multipotent neural crest stem cells (NCSCs) that could differentiate into both ectodermal and mesodermal lineages. Transplantation of PSA-NCAM− cells in a gradient manner mixed with PSA-NCAM+ cells proportionally increased mesodermal tumor formation and unwanted grafts such as PERIPHERIN+ cells or pigmented cells in the rat brain. Therefore, we suggest that NCSCs are a critical target for tumor prevention in hPSC-derived NPCs, and removal of PSA-NCAM− cells eliminates the tumorigenic potential originating from NCSCs after transplantation. PMID:25937368

The extent of unwanted infrared photoacoustic signals from polymer sampling tubings exposed to ultraviolet radiation

NARCIS (Netherlands)

Bicanic, D.; Solyom, A.; Angeli, G.; Wegh, H.; Postumus, M.; Jalink, H.

1995-01-01

The extent of unwanted photoacoustic (PA) signals due to volatiles released from various polymer tubing materials [transparent, red and black polyethylene (PE), polymer of tetrafluorethylene (PTFE) and copolymer of tetrafluorethylene and hexafluorethylene (FEP)] when exposed to 245 nm radiation was

How patient-selected colors for removable appliances are reflected in electronically tracked compliance (wear times and wear behavior).

Science.gov (United States)

Schott, Timm C; Menne, Dieter

2018-03-27

A broad spectrum of colors for removable appliances, intended to optimize acceptance of treatment and patient cooperation, have been available on the dental market for years. This is the first study to analyze how patient-selected colors are reflected in wear times and wear behavior of removable appliances. The study included 117 children (55 girls and 62 boys) who were treated with active removable plate or functional appliances. All patients were offered to choose from 11 different colors, which were pooled into six groups (black, blue, green, yellow, pink, red) for analysis, or to combine any two to four colors ("multicolored" group) for their appliances. All appliances featured a built-in microsensor (TheraMon; MC Technology, Hargelsberg, Austria) for objective wear-time tracking. Differences between wear times were analyzed using pairwise t tests and Tukey correction. The longest median wear times were recorded in the blue and green groups (≈11 h/d) and the shortest ones in the red and pink groups (≈9 h/d), but they were not significantly influenced by the patient-selected colors. The median wear times involved an age-related decrease by 0.56 h/y that was statistically significant ( P = .00005). No gender-specific patterns of wear behavior were observed. Patient-selected colors for removable appliances can presumably improve acceptance of treatment, but they are not associated with statistically significant improvements in wear time or wear behavior.

Estimation of the workload added on the health system due to unwanted pregnancies and Children born of these pregnancies in kohgiloyeh Boyrahmad province 2010-2011

Directory of Open Access Journals (Sweden)

zebaneh Tabeshfar

2015-02-01

Results: An overall 350 unwanted pregnancy cases were identified. Assuming the same unwanted pregnancies in the first half and the second year of 2009 total of 21,140 times the equivalent of 3696 hours of extra work visit were added to the labor working primary health care centers in the city. Conclusion: Unwanted pregnancies resulting in increased staff workload of health centers, and if not provided with sufficient manpower, it may lead to the reduction of maternal and child health care qualities of these centers.

Tunable natural nano-arrays : controlling surface properties and light reflectance

International Nuclear Information System (INIS)

Watson, J.A.; Myhra, S.; Cribb, B.W.; Hope, G.A.; Watson, G.S.

2005-01-01

A sudden transition or impedance mismatch from one optical medium to another can result in unwanted reflections from the surface plane. Modification of a surface by creation of a gradual change in refractive index over a significant portion of a wavelength range will result in a reduction in reflection. Multi-layered thin film coatings based on this phenomenon are widely used on a number of different surfaces (e.g. solar cells, lenses, display screens etc.) to suppress undesired reflections and/or increase light transmittance. An alternative surface modification to the multi-layered stack coating (gradient index coating) is to produce a surface with structures having a period and heights shorter than the light wavelength. These structures act like a pseudo-gradient index coating and can be described by the effective medium theory. In this study we report on nano-structures (a natural pseudo-gradient index coating) which we have found on certain species of cicada wings demonstrating their reflective effectiveness using manipulative atomic force microscopy. (author). 2 refs., 5 figs

Discharge lamp with reflective jacket

Science.gov (United States)

MacLennan, Donald A.; Turner, Brian P.; Kipling, Kent

2001-01-01

A discharge lamp includes an envelope, a fill which emits light when excited disposed in the envelope, a source of excitation power coupled to the fill to excite the fill and cause the fill to emit light, and a reflector disposed around the envelope and defining an opening, the reflector being configured to reflect some of the light emitted by the fill back into the fill while allowing some light to exit through the opening. The reflector may be made from a material having a similar thermal index of expansion as compared to the envelope and which is closely spaced to the envelope. The envelope material may be quartz and the reflector material may be either silica or alumina. The reflector may be formed as a jacket having a rigid structure which does not adhere to the envelope. The lamp may further include an optical clement spaced from the envelope and configured to reflect an unwanted component of light which exited the envelope back into the envelope through the opening in the reflector. Light which can be beneficially recaptured includes selected wavelength regions, a selected polarization, and selected angular components.

Location and removal of deslorelin acetate implants in female African lions (Panthera leo).

Science.gov (United States)

Moresco, Anneke; Dadone, Liza; Arble, Jason; Klaphake, Eric; Agnew, Dalen W

2014-06-01

Contraception is necessary to manage zoo animal populations and to be able to house animals in groups without producing additional unwanted offspring. In felids and canids, an association between exposure to progestins and the occurrence of endometrial and mammary gland pathology has been documented. Therefore, the Association of Zoos and Aquariums (AZA) Wildlife Contraceptive Center recommends the use of deslorelin acetate for long-term contraception in carnivores. Return to cyclicity after deslorelin treatment has been variable; some individuals show ovarian suppression for long periods after the expected end of the deslorelin efficacy. In an attempt to reduce the time to reversal, techniques to locate and remove previous implants are being developed. This report documents the successful implementation of high-frequency ultrasonography in lions (Panthera leo) to locate and direct surgical removal of multiple deslorelin implants placed at least 2 yr previously as well as the return of follicular activity in both females at 7 months post-removal of implants.

How to remove a chest drain.

Science.gov (United States)

Allibone, Elizabeth

2015-10-07

RATIONALE AND KEY POINTS: This article aims to help nurses to undertake the removal of a chest drain in a safe, effective and patient-centred manner. This procedure requires two practitioners. The chest drain will have been inserted aseptically to remove air, blood, fluid or pus from the pleural cavity. ▶ Chest drains may be small or wide bore depending on the underlying condition and clinical setting. They may be secured with a mattress suture and/or an anchor suture. ▶ Chest drains are usually removed under medical instructions when the patient's lung has inflated, the underlying condition has resolved, there is no evidence of respiratory compromise or failure, and their anticoagulation status has been assessed as satisfactory. ▶ Chest drains secured with a mattress suture should be removed by two practitioners. One practitioner is required to remove the tube and the other to tie the mattress suture (if present) and secure the site. REFLECTIVE ACTIVITY: Clinical skills articles can help update your practice and ensure it remains evidence based. Apply this article to your practice. Reflect on and write a short account of: 1. How reading this article will change your practice. 2. How this article could be used to educate patients with chest drains. Subscribers can upload their reflective accounts at: rcni.com/portfolio .

A tunable sub-100 nm silicon nanopore array with an AAO membrane mask: reducing unwanted surface etching by introducing a PMMA interlayer

Science.gov (United States)

Lim, Namsoo; Pak, Yusin; Kim, Jin Tae; Hwang, Youngkyu; Lee, Ryeri; Kumaresan, Yogeenth; Myoung, Nosoung; Ko, Heung Cho; Jung, Gun Young

2015-08-01

Highly ordered silicon (Si) nanopores with a tunable sub-100 nm diameter were fabricated by a CF4 plasma etching process using an anodic aluminum oxide (AAO) membrane as an etching mask. To enhance the conformal contact of the AAO membrane mask to the underlying Si substrate, poly(methyl methacrylate) (PMMA) was spin-coated on top of the Si substrate prior to the transfer of the AAO membrane. The AAO membrane mask was fabricated by two-step anodization and subsequent removal of the aluminum support and the barrier layer, which was then transferred to the PMMA-coated Si substrate. Contact printing was performed on the sample with a pressure of 50 psi and a temperature of 120 °C to make a conformal contact of the AAO membrane mask to the Si substrate. The CF4 plasma etching was conducted to transfer nanopores onto the Si substrate through the PMMA interlayer. The introduced PMMA interlayer prevented unwanted surface etching of the Si substrate by eliminating the etching ions and radicals bouncing at the gap between the mask and the substrate, resulting in a smooth Si nanopore array.Highly ordered silicon (Si) nanopores with a tunable sub-100 nm diameter were fabricated by a CF4 plasma etching process using an anodic aluminum oxide (AAO) membrane as an etching mask. To enhance the conformal contact of the AAO membrane mask to the underlying Si substrate, poly(methyl methacrylate) (PMMA) was spin-coated on top of the Si substrate prior to the transfer of the AAO membrane. The AAO membrane mask was fabricated by two-step anodization and subsequent removal of the aluminum support and the barrier layer, which was then transferred to the PMMA-coated Si substrate. Contact printing was performed on the sample with a pressure of 50 psi and a temperature of 120 °C to make a conformal contact of the AAO membrane mask to the Si substrate. The CF4 plasma etching was conducted to transfer nanopores onto the Si substrate through the PMMA interlayer. The introduced PMMA interlayer

The application of "double isolation" in Fourier transform ion cyclotron resonance sustained off-resonance irradiation collisionally-induced dissociation tandem mass spectrometry to remove labile isobaric impurities.

Science.gov (United States)

Gates, Paul J; Lopes, Norberto P; Pinto, Emani; Colepicolo, Pio; Cardozo, Karina H M

2011-01-01

This study reports the application of "double isolation" in sustained off-resonance irradiation collisionally-induced dissociation tandem mass spectrometry (SORI-CID-MS/MS) to remove radio- frequency (RF) fragment ions of very close mass isobaric ions (0.02 m/z apart). Analyses were performed with a fraction of a biological extract isolated from a macroalgae containing the mycosporine-like amino acid asterina-330. Direct isolation of the precursor ion by narrowing the isolation window proved ineffective as it impinged upon the required ion thus substantially reducing its intensity. By increasing the correlated sweep time, ejection efficiency of the isolation was improved, but caused the unwanted side-effect of RF fragmentation of labile ions. Finally, by skipping the ion activation step and performing a second isolation (in the MS(3) module) the RF fragments from the first isolation were removed leaving a very pure isolation of the required precursor ion and allowed a very clean CID fragmentation. We demonstrated that the m/z 272.1351 ion is derived from the loss of NH(3) from m/z 289.1620 isobaric impurity and is not related to asterina-330. This application represents a powerful tool to remove unwanted ions in the MS/MS spectrum that result from fragmentation of isobaric ions.

Preliminary results from uranium/americium affinity studies under experimental conditions for cesium removal from NPP ''Kozloduy'' simulated wastes solutions

International Nuclear Information System (INIS)

Nikiforova, A.; Kinova, L.; Peneva, C.; Taskaeva, I.; Petrova, P.

2005-01-01

We use the approach described by Westinghouse Savannah River Company using ammonium molybdophosphate (AMP) to remove elevated concentrations of radioactive cesium to facilitate handling waste samples from NPP K ozloduy . Preliminary series of tests were carried out to determine the exact conditions for sufficient cesium removal from five simulated waste solutions with concentrations of compounds, whose complexing power complicates any subsequent processing. Simulated wastes solutions contain high concentrations of nitrates, borates, H 2 C 2 O 4 , ethylenediaminetetraacetate (EDTA) and Citric acid, according to the composition of the real waste from the NPP. On this basis a laboratory treatment protocol was created. This experiment is a preparation for the analysis of real waste samples. In this sense the results are preliminary. Unwanted removal of non-cesium radioactive species from simulated waste solutions was studied with gamma spectrometry with the aim to find a compromise between on the one hand the AMP effectiveness and on the other hand unwanted affinity to AMP of Uranium and Americium. Success for the treatment protocol is defined by proving minimal uptake of U and Am, while at the same time demonstrating good removal effectiveness through the use of AMP. Uptake of U and Am were determined as influenced by oxidizing agents at nitric acid concentrations, proposed by Savannah River National laboratory. It was found that AMP does not significantly remove U and Am when concentration of oxidizing agents is more than 0.1M for simulated waste solutions and for contact times inherent in laboratory treatment protocol. Uranium and Americium affinity under experimental conditions for cesium removal were evaluated from gamma spectrometric data. Results are given for the model experiment and an approach for the real waste analysis is chosen. Under our experimental conditions simulated wastes solutions showed minimal affinity to AMP when U and Am are most probably in

Teaching children with autism spectrum disorders to mand for the removal of stimuli that prevent access to preferred items.

Science.gov (United States)

Shillingsburg, M Alice; Powell, Nicole M; Bowen, Crystal N

2013-01-01

Mand training is often a primary focus in early language instruction and typically includes mands that are positively reinforced. However, mands maintained by negative reinforcement are also important skills to teach. These include mands to escape aversive demands or unwanted items. Another type of negatively reinforced mand important to teach involves the removal of a stimulus that prevents access to a preferred activity. We taught 5 participants diagnosed with autism spectrum disorders to mand for the removal of a stimulus in order to access a preferred item that had been blocked. An evaluation was conducted to determine if participants responded differentially when the establishing operations for the preferred item were present versus absent. All participants learned to mand for the removal of the stimulus exclusively under conditions when the establishing operation was present.

Uniting to prevent unwanted pregnancies.

Science.gov (United States)

Lynch, D

1994-02-18

In reading the column of Cal Thomas entitled "Speaking Truth to Power" it becomes clear that the forces aligned against each other on the issue of reproductive choice should work together in order to reduce the number of unwanted pregnancies. An estimated 400 million women are unable to limit their family size for economic reasons. More are inhibited by social or religious constraints. When family planning (FP) services are available, and the status and education levels of women are raised, abortion rates decrease. This is demonstrated in the Netherlands, where legal abortions and contraception are available. The abortion rate is less than 5/1000 women there, one of the lowest worldwide. Latin America, where abortion is illegal and FP services are lacking, has abortion rates of 30-60/1000. Furthermore, these illegal abortions usually have a tragic effect on the woman's health. Of an estimated 6 million pregnancies annually in the United States, approximately half are unintended. Of these, about 1.6 million are aborted. Of the women in the United States who become pregnant annually, 82% are unmarried, 25% are under 20 years of age, and 33% make less than $11,000 yearly. If industrialized nations made contraceptives and FP services available to the poor worldwide, the quality of life on earth would increase. Human misery, anarchy, and resource depletion would decrease. State and local governments should increase support of domestic FP activities, while the federal government should raise its funding of international FP services. In order to reach the goals set by the 1989 Amsterdam Declaration, which was signed by the US, the annual contribution of the United States needs to be doubled. 4% of the US foreign aid budget, $720 million, is less than 0.1% of its $1.5 trillion budget. This amounts to less than $3 per US citizen.

Effects of planned, mistimed and unwanted pregnancies on the use of prenatal health services in sub-Saharan Africa: a multicountry analysis of Demographic and Health Survey data.

Science.gov (United States)

Amo-Adjei, Joshua; Anamaale Tuoyire, Derek

2016-12-01

We analysed the extent of planned, mistimed and unwanted pregnancies and how they predict optimal use of prenatal (timing and number of antenatal) care services in 30 African countries. We pooled data from Demographic and Health Surveys conducted in 30 African countries between 2006 and 2015. We described the extent of mistimed and unwanted pregnancies and further used mixed effects logistic and Poisson regression estimation techniques to examine the impacts of planned, mistimed and unwanted pregnancies on the use of prenatal health services. In total, 73.65% of pregnancies in all countries were planned. Mistimed pregnancy ranged from 7.43% in Burkina Faso to 41.33% in Namibia. Unwanted pregnancies were most common in Swaziland (39.54%) and least common in Niger (0.74%). Timely (first trimester) initiation of ANC was 37% overall in all countries; the multicountry average number of ANC visits was optimal [4.1; 95% CI: 4.1-4.2] but with notable disparities between countries. Overall, mistimed and unwanted pregnancies were strongly associated with late ANC attendance and fewer visits women made in the pooled analysis. Unintended pregnancies are critical risks to achieving improved maternal health in respect of early and optimal ANC coverage for women in Africa. Programmes targeted at advancing coverage of ANC in Africa need to deploy contextually appropriate mechanisms to prevent unintended pregnancies. © 2016 John Wiley & Sons Ltd.

Removal of metals from landfill leachate by sorption to activated carbon, bone meal and iron fines.

Science.gov (United States)

Modin, Hanna; Persson, Kenneth M; Andersson, Anna; van Praagh, Martijn

2011-05-30

Sorption filters based on granular activated carbon, bone meal and iron fines were tested for their efficiency of removing metals from landfill leachate. Removal of Al, As, Ca, Cd, Co, Cr, Cu, Fe, Hg, Mg, Mn, Mo, Ni, Pb, Sr and Zn were studied in a laboratory scale setup. Activated carbon removed more than 90% of Co, Cr, Cu, Fe, Mn and Ni. Ca, Pb, Sr and Zn were removed but less efficiently. Bone meal removed over 80% of Cr, Fe, Hg, Mn and Sr and 20-80% of Al, Ca, Cu, Mo, Ni, Pb and Zn. Iron fines removed most metals (As, Ca, Co, Cr, Cu, Fe, Mg, Mn, Pb, Sr and Zn) to some extent but less efficiently. All materials released unwanted substances (metals, TOC or nutrients), highlighting the need to study the uptake and release of a large number of compounds, not only the target metals. To remove a wide range of metals using these materials two or more filter materials may need to be combined. Sorption mechanisms for all materials include ion exchange, sorption and precipitation. For iron fines oxidation of Fe(0) seems to be important for metal immobilisation. Copyright © 2011 Elsevier B.V. All rights reserved.

Reflective all-sky thermal infrared cloud imager.

Science.gov (United States)

Redman, Brian J; Shaw, Joseph A; Nugent, Paul W; Clark, R Trevor; Piazzolla, Sabino

2018-04-30

A reflective all-sky imaging system has been built using a long-wave infrared microbolometer camera and a reflective metal sphere. This compact system was developed for measuring spatial and temporal patterns of clouds and their optical depth in support of applications including Earth-space optical communications. The camera is mounted to the side of the reflective sphere to leave the zenith sky unobstructed. The resulting geometric distortion is removed through an angular map derived from a combination of checkerboard-target imaging, geometric ray tracing, and sun-location-based alignment. A tape of high-emissivity material on the side of the reflector acts as a reference that is used to estimate and remove thermal emission from the metal sphere. Once a bias that is under continuing study was removed, sky radiance measurements from the all-sky imager in the 8-14 μm wavelength range agreed to within 0.91 W/(m 2 sr) of measurements from a previously calibrated, lens-based infrared cloud imager over its 110° field of view.

Reasons why undergraduate women comply with unwanted, non-coercive sexual advances: A serial indirect effect model integrating sexual script theory and sexual self-control perspectives.

Science.gov (United States)

Quinn-Nilas, Christopher; Kennett, Deborah J

2018-01-16

This study explored the predictors of young women's compliance with unwanted sexual activities, integrating the social with the cognitive and behavioral correlates of sexual compliance. In total, 222 young heterosexual women completed measures examining the Sexual Self-Control model, including reasons for consenting, sexual resourcefulness, and compliance with unwanted sex, as well as gender role measures pertaining to sexual script theory, including the sexual double standard, gender role stress, and virginity scripts. An exploratory analysis of serial indirect effects demonstrated that women scoring lower in sexual resourcefulness endorsed higher female gender role stress, which in turn was associated with higher endorsement of reasons for consent, translating into more frequent compliance with unwanted sexual activities. The relationship between one's ability to refuse and their decision to refuse appears quite complex. Understanding one's decision requires consideration of the social aspects of gender role endorsement.

When is a medicine unwanted, how is it disposed, and how might safe disposal be promoted? Insights from the Australian population.

Science.gov (United States)

Bettington, Emilie; Spinks, Jean; Kelly, Fiona; Gallardo-Godoy, Alejandra; Nghiem, Son; Wheeler, Amanda J

2017-12-19

Objective The aim of the present study was to explore disposal practices of unwanted medicines in a representative sample of Australian adults, compare this with previous household waste surveys and explore awareness of the National Return and Disposal of Unwanted Medicines (RUM) Project. Methods A 10-min online survey was developed, piloted and conducted with an existing research panel of adult individuals. Survey questions recorded demographics, the presence of unwanted medicines in the home, medicine disposal practices and concerns about unwanted medicines. Descriptive statistical analyses and rank-ordered logit regression were conducted. Results Sixty per cent of 4302 respondents reported having unwanted medicines in their household. Medicines were primarily kept just in case they were needed again and one-third of these medicines were expired. Two-thirds of respondents disposed of medicines with the household garbage and approximately one-quarter poured medicines down the drain. Only 17.6% of respondents had heard of the RUM Project, although, once informed, 91.7% stated that they would use it. Respondents ranked the risk of unintended ingestion as the most important public health message for future social marketing campaigns. Conclusions Respondents were largely unaware of the RUM Project, yet were willing to use it once informed. Limited awareness could lead to environmental or public health risks, and targeted information campaigns are needed. What is known about the topic? There is a growing international evidence base on how people dispose of unwanted medicines and the negative consequences, particularly the environmental effects of inappropriate disposal. Although insight into variation in disposal methods is increasing, knowledge of how people perceive risks and awareness of inappropriate disposal methods is more limited. What does this paper add? This study provides evidence of inappropriate medicines disposal and potential stockpiling of medicines in

Natural organic matters removal efficiency by coagulation

Science.gov (United States)

Sapingi, Mohd Sharizal Mohd; Pishal, Munirah; Murshed, Mohamad Fared

2017-10-01

The presence of Natural Organic Matter (NOM) in surface water results in unwanted characteristics in terms of color, odor, and taste. NOM content reaction with free chlorine in treated water lowers the water quality further. Chlorine is added for disinfection and produces undesirable disinfection by-products (DPBs). DBPs in drinking water are carcinogenic to consumers and may promote cancerous cell development in the human body. This study was performed to compare the coagulant efficiency of aluminum sulfate (Alum) and ferric chloride (FeCl3) on NOM removal (as in UV254 absorbance) and turbidity removal under three pH conditions (pH 6, pH 7, and sample actual pH). The three sampling points for these studies were Jalan Baru River, Kerian River, and Redac Pond. Additional sampling points, such as Lubuk Buntar and a tubewell located in the Civil Engineering School, were included to observe differences in characteristics. DOC, UV absorbance, and full wavelength were tested, after which samples treated with alum were also tested to further analyze the NOM content. Based on UV254 absorbance and DOC data, specific UV value was calculated to obtain vital synopsis of the characteristics of NOM content, as well as coagulation efficiency.

Abortion and mental health : A longitudinal study of common mental disorders among women who terminated an unwanted pregnancy

NARCIS (Netherlands)

van Ditzhuijzen, J.M.

2017-01-01

In the last decade there has been renewed interest in the question whether termination of an unwanted pregnancy is linked to subsequent mental health disorders. Most research in this field is characterized by methodological limitations, and conclusions often remain disputable. To offer insight in

A generic EEG artifact removal algorithm based on the multi-channel Wiener filter

Science.gov (United States)

Somers, Ben; Francart, Tom; Bertrand, Alexander

2018-06-01

Objective. The electroencephalogram (EEG) is an essential neuro-monitoring tool for both clinical and research purposes, but is susceptible to a wide variety of undesired artifacts. Removal of these artifacts is often done using blind source separation techniques, relying on a purely data-driven transformation, which may sometimes fail to sufficiently isolate artifacts in only one or a few components. Furthermore, some algorithms perform well for specific artifacts, but not for others. In this paper, we aim to develop a generic EEG artifact removal algorithm, which allows the user to annotate a few artifact segments in the EEG recordings to inform the algorithm. Approach. We propose an algorithm based on the multi-channel Wiener filter (MWF), in which the artifact covariance matrix is replaced by a low-rank approximation based on the generalized eigenvalue decomposition. The algorithm is validated using both hybrid and real EEG data, and is compared to other algorithms frequently used for artifact removal. Main results. The MWF-based algorithm successfully removes a wide variety of artifacts with better performance than current state-of-the-art methods. Significance. Current EEG artifact removal techniques often have limited applicability due to their specificity to one kind of artifact, their complexity, or simply because they are too ‘blind’. This paper demonstrates a fast, robust and generic algorithm for removal of EEG artifacts of various types, i.e. those that were annotated as unwanted by the user.

Latest innovations for tattoo and permanent makeup removal.

Science.gov (United States)

Mao, Johnny C; DeJoseph, Louis M

2012-05-01

The goal of this article is to reveal the latest techniques and advances in laser removal of both amateur and professional tattoos, as well as cosmetic tattoos and permanent makeup. Each pose different challenges to the removing physician, but the goal is always the same: removal without sequelae. The authors' technique is detailed, and discussion of basic principles of light reflection, ink properties, effects of laser energy and heat, and outcomes and complications of tattoo removal are presented. Copyright © 2012 Elsevier Inc. All rights reserved.

Standardizing terms, definitions and concepts for describing and interpreting unwanted immunogenicity of biopharmaceuticals: recommendations of the Innovative Medicines Initiative ABIRISK consortium

NARCIS (Netherlands)

Rup, B.; Pallardy, M.; Sikkema, D.; Albert, T.; Allez, M.; Broet, P.; Carini, C.; Creeke, P.; Davidson, J.; de Vries, N. [=Niek; Finco, D.; Fogdell-Hahn, A.; Havrdova, E.; Hincelin-Mery, A.; C Holland, M.; H Jensen, P. E.; Jury, E. C.; Kirby, H.; Kramer, D.; Lacroix-Desmazes, S.; Legrand, J.; Maggi, E.; Maillère, B.; Mariette, X.; Mauri, C.; Mikol, V.; Mulleman, D.; Oldenburg, J.; Paintaud, G.; R Pedersen, C.; Ruperto, N.; Seitz, R.; Spindeldreher, S.; Deisenhammer, F.

2015-01-01

Biopharmaceuticals (BPs) represent a rapidly growing class of approved and investigational drug therapies that is contributing significantly to advancing treatment in multiple disease areas, including inflammatory and autoimmune diseases, genetic deficiencies and cancer. Unfortunately, unwanted

Guidelines on the safety of light-based home-use hair removal devices from the European Society for Laser Dermatology

DEFF Research Database (Denmark)

Town, Graham; Ash, C; Dierickx, C

2012-01-01

. These guidelines provide a definition of light-based home-use technology, to inform healthcare professionals about home-use light-based technology and encourage manufacturers wishing to sell in Europe to adopt 'best practice'. The review presents the current status on standards and regulation issues and considers...... home-use safety issues, encompassing human, device and electrical safety, given risks to the eyes and skin from optical radiation both to the consumer and persons in the vicinity. Proposed technical measurement methodology is considered with focus on recognized critical parameters for the safe use...... of light-based hair removal technology including recording the technical performance and safety claims of a range of home-use hair removal devices. The literature review emphasizes potential adverse incidents and safety aspects of treating cosmetic conditions, such as unwanted hair growth. Although some...

Life and the laundromat: reflections on dirty linen and everyday private life.

Science.gov (United States)

Lawler, J

1997-09-01

This is a paper in which I reflect on, and draw issues from, an unplanned ethnographic experience in a London laundromat. The concept of 'everyday life' has a kind of simple, even benign, quality. However, there are many events in everyday life that are complex and complicating. Everyday life can be mundane--boring even. But it can also confront and trouble us, even when it concerns such apparently ordinary matters like doing the laundry. This paper is about how the ordinary matters of everyday life can become problematic and how our involvement in them can confront us with dilemmas that are unwanted yet require our attention and judgement as participants in social life.

Unwanted sexual advances at work: variations by employment arrangement in a sample of working Australians.

Science.gov (United States)

Lamontagne, Anthony D; Smith, Peter M; Louie, Amber M; Quinlan, Michael; Shoveller, Jean; Ostry, Aleck S

2009-04-01

We tested the hypothesis that the risk of experiencing unwanted sexual advances at work (UWSA) is greater for precariously-employed workers in comparison to those in permanent or continuing employment. A cross-sectional population-based telephone survey was conducted in Victoria (66% response rate, N=1,101). Employment arrangements were analysed using eight differentiated categories, as well as a four-category collapsed measure to address small cell sizes. Self-report of unwanted sexual advances at work was modelled using multiple logistic regression in relation to employment arrangement, controlling for gender, age, and occupational skill level. Forty-seven respondents reported UWSA in our sample (4.3%), mainly among women (37 of 47). Risk of UWSA was higher for younger respondents, but did not vary significantly by occupational skill level or education. In comparison to Permanent Full-Time, three employment arrangements were strongly associated with UWSA after adjustment for age, gender, and occupational skill level: Casual Full-Time OR = 7.2 (95% Confidence Interval 1.7-30.2); Fixed-Term Contract OR = 11.4 (95% CI 3.4-38.8); and Own-Account Self-Employed OR = 3.8 (95% CI 1.2-11.7). In analyses of females only, the magnitude of these associations was further increased. Respondents employed in precarious arrangements were more likely to report being exposed to UWSA, even after adjustment for age and gender. Greater protections from UWSA are likely needed for precariously employed workers.

Wavelet analysis as a tool to characteriseand remove environmental noisefrom self-potential time series

Directory of Open Access Journals (Sweden)

M. Ragosta

2004-06-01

Full Text Available Multiresolution wavelet analysis of self-potential signals and rainfall levels is performed for extracting fluctuations in electrical signals, which might be addressed to meteorological variability. In the time-scale domain of the wavelet transform, rain data are used as markers to single out those wavelet coefficients of the electric signal which can be considered relevant to the environmental disturbance. Then these coefficients are filtered out and the signal is recovered by anti-transforming the retained coefficients. Such methodological approach might be applied to characterise unwanted environmental noise. It also can be considered as a practical technique to remove noise that can hamper the correct assessment and use of electrical techniques for the monitoring of geophysical phenomena.

Does abortion reduce the mental health risks of unwanted or unintended pregnancy? A re-appraisal of the evidence.

Science.gov (United States)

Fergusson, David M; Horwood, L John; Boden, Joseph M

2013-09-01

There have been debates about the linkages between abortion and mental health. Few reviews have considered the extent to which abortion has therapeutic benefits that mitigate the mental health risks of abortion. The aim of this review was to conduct a re-appraisal of the evidence to examine the research hypothesis that abortion reduces rates of mental health problems in women having unwanted or unintended pregnancy. Analysis of recent reviews (Coleman, 2011; National Collaborating Centre for Mental Health, 2011) identified eight publications reporting 14 adjusted odds ratios (AORs) spanning five outcome domains: anxiety; depression; alcohol misuse; illicit drug use/misuse; and suicidal behaviour. For each outcome, pooled AORs were estimated using a random-effects model. There was consistent evidence to show that abortion was not associated with a reduction in rates of mental health problems (p>0.75). Abortion was associated with small to moderate increases in risks of anxiety (AOR 1.28, 95% CI 0.97-1.70; pabortion has therapeutic effects in reducing the mental health risks of unwanted or unintended pregnancy. There is suggestive evidence that abortion may be associated with small to moderate increases in risks of some mental health problems.

Intelligent Image Analysis for Image-Guided Laser Hair Removal and Skin Therapy

Science.gov (United States)

Walker, Brian; Lu, Thomas; Chao, Tien-Hsin

2012-01-01

We present the development of advanced automatic target recognition (ATR) algorithms for the hair follicles identification in digital skin images to accurately direct the laser beam to remove the hair. The ATR system first performs a wavelet filtering to enhance the contrast of the hair features in the image. The system then extracts the unique features of the targets and sends the features to an Adaboost based classifier for training and recognition operations. The ATR system automatically classifies the hair, moles, or other skin lesion and provides the accurate coordinates of the intended hair follicle locations. The coordinates can be used to guide a scanning laser to focus energy only on the hair follicles. The intended benefit would be to protect the skin from unwanted laser exposure and to provide more effective skin therapy.

Exposure to unwanted intrusions, neutralizing and their effects on self-worth and obsessive-compulsive phenomena.

Science.gov (United States)

Ahern, Claire; Kyrios, Michael; Meyer, Denny

2015-12-01

Although there is a growing body of literature to support the importance of understanding self processes in the experience of obsessive-compulsive disorder (OCD), no experimental research has directly examined the relationship between self-construals and phenomena central to OCD. The current study examined the effect that unwanted intrusions and neutralizing responses have on self-worth, distress and urge to neutralize. After listening to repeated audio recordings of idiosyncratic unwanted intrusions, a combined nonclinical and clinical OCD sample were asked to respond with either their chosen neutralizing strategy (experimental) or a refocus counting strategy (control). Each condition comprised of a 12-min responding period (respond) followed by an equivalent non-response period (listen). Participants completed each condition, and were randomly allocated into the condition completed first. Ratings of discomfort, urge to neutralize, and self-worth were measured throughout. Neutralizing and refocussing responses were both associated with decreases in discomfort and higher self-worth. The expected rebound effect for discomfort and urge to neutralize for the listen period after neutralizing was found. Methodological problems lead to missing data, although this was corrected with the use of Multi Level Modelling (MLM) analysis on a combined sample. The small clinical sample meant that comparison between the two populations was not possible. Findings support cognitive accounts that neutralizing is involved in the development and maintenance of OCD, and suggest that neutralizing is a purposeful response aimed to help reinstate self-worth. Implications and directions for future research are discussed. Copyright © 2015 Elsevier Ltd. All rights reserved.

Abortion and mental health : A longitudinal study of common mental disorders among women who terminated an unwanted pregnancy

OpenAIRE

van Ditzhuijzen, J.M.

2017-01-01

In the last decade there has been renewed interest in the question whether termination of an unwanted pregnancy is linked to subsequent mental health disorders. Most research in this field is characterized by methodological limitations, and conclusions often remain disputable. To offer insight in the mental health of women who have abortions, both before and after the pregnancy termination, a prospective longitudinal cohort study was conducted, the “Dutch Abortion and Mental Health Study” (DA...

Game Theoretic Analysis of Pricing and Cooperative Advertising in a Reverse Supply Chain for Unwanted Medications in Households

OpenAIRE

Meina Hua; Huajun Tang; Ivan Ka Wai Lai

2017-01-01

Improper disposal of household unwanted medications (UMs) is an emergency problem around the world that adversely affects the sustainability of the environment and human’s health. However, the current disposal practices, mainly based on advertising and collecting status, are unsatisfactory in most countries and regions. Thus, some scholars proposed an alternative disposal practice that is to provide incentives to customers. This study aims to compare a Single Model (advertising only) with a J...

Seismic reflection data processing in active volcanic areas: an application to Campi Flegrei and Somma Vesuvius offshore (Southern Italy

Directory of Open Access Journals (Sweden)

A. Rapolla

2002-06-01

Full Text Available The Campanian volcanism develops near the sea. Therefore, the geophysical study of the marine environment is a key to a better understanding of the tectonic evolution and the origin of volcanism in the area. An abundance of high quality seismic data in the marine sector, where little direct information is available, is critical to the study of Campanian volcanism. This paper concerns the reprocessing of a seismic reflection dataset acquired in Naples Bay and processed during 1973. Even though the overall data quality was high for that time, of course their acquisition technological limits have been overcome by the new processing. Our reprocessing aimed at: 1 reduction of random noise in the data; 2 removal of unwanted coherent events; 3 reduction of spatial aliasing by means of trace interpolation on Commod Shot Point (CSP gathering; 4 improvement of resolution of the seismic wavelet with spiking deconvolution algorithms and finally 5 reposition of reflectors in their correct locations in the space-TWT domain by means of dip moveout and post-stack time migration. A comparison between the new and old data shows that the new sections are characterized by a much higher S/N ratio. Diffraction hyperbole has been collapsed. Reverberations, ghosts and multiples have been removed or greatly attenuated, especially between the reflectors of interest, allowing us to follow them with more detail and with greater continuity. Furthermore, data resolution has been boosted by the reprocessing, allowing the interpreter to evaluate reflector position and continuity in greater detail. The reinterpretation phase of such lines, that is already in an advanced stage, will therefore allow us to gain new insights into the structural setting of the bay, with the aim of exploring the connection between tectonics and volcanism.

The Retrospective Evaluation of the Efficacy and Safety of IPL (Intense Pulse Light in Hair Removal

Directory of Open Access Journals (Sweden)

İlgen Ertam

2012-06-01

Full Text Available Background and Design: There are numerous therapeutic methods for hair removal with various success rates. The aim of this study was to evaluate the efficacy of Intense Pulse Light (IPL method for hair removal.Materials and Methods: Ninety patients, who applied for their unwanted hair, were included in the study. IPL was applied to the face, neck, axillary areas, bikini line, sternal area, periareolar areas, and upper and lower extremities. An IPL device (L900 A&M, France was used for hair removal. The results were evaluated according to the clinical improvement (0-25%, 25-50%, 50-75%, 75% and more and patients? satisfaction (very satisfied, satisfied, less satisfied, not satisfied. All results were analyzed using Chi-square test and statistical analysis was performed by SPSS 15.0 for Windows. Results: There were eighty-eight female (97.8% and two male (2.2% patients. The mean age of the patients was 33.62±11.11 (15- 55 years. 13.3% of patients had polycystic ovary syndrome. The mean number of treatments was 6.5 (min-max= 2-11. 53.2% of patients had 50-75% clinical response and 53.2% of patients were satisfied. There were no side effects except mild erythema. Conclusion: We observed that IPL for hair removal was safe and moderately effective in our patients.

Effect of nanodiamond fluorination on the efficiency of quasispecular reflection of cold neutrons

Science.gov (United States)

Nesvizhevsky, V. V.; Dubois, M.; Gutfreund, Ph.; Lychagin, E. V.; Nezvanov, A. Yu.; Zhernenkov, K. N.

2018-02-01

Nanomaterials, which show large reflectivity for external radiation, are of general interest in science and technology. We report a result from our ongoing research on the reflection of low-energy neutrons from powders of detonation diamond nanoparticles. Our previous work showed a large probability for quasispecular reflection of neutrons from this medium. The model of neutron scattering from nanoparticles, which we have developed, suggests two ways to increase the quasispecular reflection probability: (1) the reduction of incoherent scattering by substitution of hydrogen with fluorine inside the nanoparticles, and (2) the sharpening of the neutron optical potential step by removal of amorphous s p2 carbon from the nanoparticle shells. We present experimental results on scattering of slow neutrons from both raw and fluorinated diamond nanoparticles with amorphous s p2 carbon removed by gas-solid fluorination. These results show a clear increase in quasispecular reflection probability.

PreciseMail anti-spam gateway allows users more control over spam definitions; unwanted email is eliminated with no false positives

CERN Multimedia

ten Bruggencate, J

2003-01-01

"PreciseMail Anti-Spam Gateway uses a combination of proven heuristic (rules-based) and artificial intelligence technologies that eliminates unwanted spam e-mail at an Internet gateway without filtering critical e-mail messages. Its highly effective filtering engine identifies spam and allows multiple levels of tuning and customization to meet each user's personal e-mail spam filtering requirements" (1 page).

Fossil fuel subsidy removal and inadequate public power supply: Implications for businesses

International Nuclear Information System (INIS)

Bazilian, Morgan; Onyeji, Ijeoma

2012-01-01

We briefly consider the impact of fossil fuel subsidy removal policies in the context of inadequate power supply, with a focus on the implications for businesses. In doing so, we utilize the case of the early 2012 fuel subsidy removal in Nigeria. The rationale for such subsidy-removal policies is typically informed by analysis showing that they lead to an economically inefficient allocation of resources and market distortions, while often failing to meet intended objectives. However, often the realities of infrastructural and institutional deficiencies are not appropriately factored into the decision-making process. Businesses in many developing countries, already impaired by the high cost of power supply deficiencies, become even less competitive on an unsubsidized basis. We find that justifications for removal often do not adequately reflect the specific environments of developing country economies, resulting in poor recommendations – or ineffective policy. - Highlights: ► We consider the impact of fuel subsidy removal in the context of energy poverty. ► Calls for subsidy removal often do not reflect the developing country realities. ► Businesses impaired by power supply deficiencies, become even less competitive.

To retain or remove user fees?: reflections on the current debate in low- and middle-income countries.

Science.gov (United States)

James, Chris D; Hanson, Kara; McPake, Barbara; Balabanova, Dina; Gwatkin, Davidson; Hopwood, Ian; Kirunga, Christina; Knippenberg, Rudolph; Meessen, Bruno; Morris, Saul S; Preker, Alexander; Souteyrand, Yves; Tibouti, Abdelmajid; Villeneuve, Pascal; Xu, Ke

2006-01-01

Many low- and middle-income countries continue to search for better ways of financing their health systems. Common to many of these systems are problems of inadequate resource mobilisation, as well as inefficient and inequitable use of existing resources. The poor and other vulnerable groups who need healthcare the most are also the most affected by these shortcomings. In particular, these groups have a high reliance on user fees and other out-of-pocket expenditures on health which are both impoverishing and provide a financial barrier to care. It is within this context, and in light of recent policy initiatives on user fee removal, that a debate on the role of user fees in health financing systems has recently returned. This paper provides some reflections on the recent user fees debate, drawing from the evidence presented and subsequent discussions at a recent UNICEF consultation on user fees in the health sector, and relates the debate to the wider issue of access to adequate healthcare. It is argued that, from the wealth of evidence on user fees and other health system reforms, a broad consensus is emerging. First, user fees are an important barrier to accessing health services, especially for poor people. They also negatively impact on adherence to long-term expensive treatments. However, this is offset to some extent by potentially positive impacts on quality. Secondly, user fees are not the only barrier that the poor face. As well as other cost barriers, a number of quality, information and cultural barriers must also be overcome before the poor can access adequate health services. Thirdly, initial evidence on fee abolition in Uganda suggests that this policy has improved access to outpatient services for the poor. For this to be sustainable and effective in reaching the poor, fee removal needs to be part of a broader package of reforms that includes increased budgets to offset lost fee revenue (as was the case in Uganda). Fourthly, implementation matters

Functions and Requirements for Debris Removal System-Project A.2

International Nuclear Information System (INIS)

PRECECHTEL, D.R.

1999-01-01

This revision of the Functions and Requirements Document updates the approved Functions and Requirements for Debris Removal Subproject WHC-SD-SNF-FRD-009, Rev. 0. It has been revised in its entirety to reflect the current scope of work for Debris Removal as canisters and lids under the K Basin Projects work breakdown structure (WBS). In this revision the canisters and lids will be consider debris and a new set of Functions and Requirements have been developed to remove the canisters and lids from the basin

Older Adults Can Suppress Unwanted Memories When Given an Appropriate Strategy

Science.gov (United States)

2015-01-01

Memory suppression refers to the ability to exclude distracting memories from conscious awareness, and this ability can be assessed with the think/no-think paradigm. Recent research with older adults has provided evidence suggesting both intact and deficient memory suppression. The present studies seek to understand the conditions contributing to older adults’ ability to suppress memories voluntarily. We report 2 experiments indicating that the specificity of the think/no-think task instructions contributes to older adults’ suppression success: When older adults receive open-ended instructions that require them to develop a retrieval suppression strategy on their own, they show diminished memory suppression compared with younger adults. Conversely, when older adults receive focused instructions directing them to a strategy thought to better isolate inhibitory control, they show suppression-induced forgetting similar to that exhibited by younger adults. Younger adults demonstrate memory suppression regardless of the specificity of the instructions given, suggesting that the ability to select a successful suppression strategy spontaneously may be compromised in older adults. If so, this deficit may be associated with diminished control over unwanted memories in naturalistic settings if impeded strategy development reduces the successful deployment of inhibitory control. PMID:25602491

HIV, unwanted pregnancy and abortion--where is the human rights approach?

Science.gov (United States)

de Bruyn, Maria

2012-12-01

The HIV/AIDS field is addressing how legal and policy restrictions affect access to health promotion and care, e.g., in relation to criminalization of HIV transmission, drug use and sex work. Work to address the reproductive rights of women living with HIV, particularly regarding unwanted pregnancy and abortion, has nevertheless lagged behind, despite its potential to contribute to broader advocacy for access to comprehensive reproductive health information and services for all women. It is in that context that this paper examines abortion in relation to the rights of women and girls living with HIV. The paper first presents findings from recent research on HIV-positive women's reasons for seeking abortions and experiences with abortion-related care. This is followed by a discussion of abortion in relation to human rights and how this has been both addressed and neglected in policy and guidance related to the reproductive health of women living with HIV. The concluding remarks offer recommendations for expanding efforts to provide comprehensive, human rights-based sexual and reproductive health care to women living with HIV by including abortion-related information and services. Copyright © 2012 Reproductive Health Matters. Published by Elsevier Ltd. All rights reserved.

Imaging Hybrid Photon Detectors with a Reflective Photocathode

CERN Document Server

Ferenc, D

2000-01-01

Modern epitaxially grown photocathodes, like GaAsP, bring a very high inherent quantum efficiency, but are rather expensive due to the complicated manufacturing and mounting process. We argue that such photocathodes could be used in reflective mode, in order to avoid the risky and expensive removal of the epitaxial growth substrate. Besides that the quantum efficiency should increase considerably. In this paper we present results of the development of large imaging Hybrid Photon Detectors (HPDs), particularly designed for such reflective photocathodes.

The effect of aeration on the removal of wastewater-derived pharmaceutical residues from groundwater - a laboratory study.

Science.gov (United States)

Burke, Victoria; Duennbier, Uwe; Massmann, Gudrun

2013-01-01

Several studies on waste- or drinking water treatment processes as well as on groundwater have recently shown that some pharmaceutical residues (PRs) are redox-sensitive. Hence, their (bio)degradation depends on the redox conditions prevalent in the aquifer. Groundwater, providing raw water for drinking water production, is often anoxic and aeration is a widespread treatment method applied mainly to eliminate unwanted iron and manganese from the water. As a side-effect, aeration may trigger the elimination of PRs. Within the present study the influence of aeration on the fate of a number of wastewater derived analgesics and their residues as well as several antimicrobial compounds was investigated. For this purpose, anoxic groundwater was transferred into stainless steel tanks, some of which were aerated while others were continuously kept anoxic. Results prove that the degradation of six phenazone type compounds is dependent on oxygen availability and compounds are efficiently removed under oxic conditions only. Concerning the antimicrobials, doxycycline and trimethoprim were better removed during aeration, whereas a slightly improved removal under anoxic conditions was observed for clindamycin, roxithromycin and clarithromycin. The study provides first laboratory proof of the redox-sensitivity of several organic trace pollutants. In addition, results demonstrate that aeration is an effective treatment for the elimination of a number of wastewater derived PRs.

A case of generalized allergic contact dermatitis after laser tattoo removal.

Science.gov (United States)

Yorulmaz, Ahu; Onan, Duru Tabanlioglu; Artuz, Ferda; Gunes, Ridvan

2015-01-01

Tattoos are popular body decorations mainly done for cosmetic purposes. Regarded as a form of self-expression, tattoos reflect the character of the person wearing it. However, as tatoos are persistent visual markings on the body, frequently misperceived by the others causing tattooed to seek removal. Today most of the tattoos can be successfully treated with laser ablation. Here we present a case of generalized allergic contact dermatitis after laser tattoo removal which is a rare adverse reaction of laser tattoo removal.

Visualization of laser tattoo removal treatment effects in a mouse model by two-photon microscopy.

Science.gov (United States)

Jang, Won Hyuk; Yoon, Yeoreum; Kim, Wonjoong; Kwon, Soonjae; Lee, Seunghun; Song, Duke; Choi, Jong Woon; Kim, Ki Hean

2017-08-01

Laser tattoo removal is an effective method of eliminating tattoo particles in the skin. However, laser treatment cannot always remove the unwanted tattoo completely, and there are risks of either temporary or permanent side effects. Studies using preclinical animal models could provide detailed information on the effects of laser treatment in the skin, and might help to minimize side effects in clinical practices. In this study, two-photon microscopy (TPM) was used to visualize the laser treatment effects on tattoo particles in both phantom specimens and in vivo mouse models. Fluorescent tattoo ink was used for particle visualization by TPM, and nanosecond (ns) and picosecond (ps) lasers at 532 nm were used for treatment. In phantom specimens, TPM characterized the fragmentation of individual tattoo particles by tracking them before and after the laser treatment. These changes were confirmed by field emission scanning electron microscopy (FE-SEM). TPM was used to measure the treatment efficiency of the two lasers at different laser fluences. In the mouse model, TPM visualized clusters of tattoo particles in the skin and detected their fragmentation after the laser treatment. Longitudinal TPM imaging observed the migration of cells containing tattoo particles after the laser treatment. These results show that TPM may be useful for the assessment of laser tattoo removal treatment in preclinical studies.

The generalized vectorial laws of reflection and refraction

International Nuclear Information System (INIS)

Bhattacharjee, Pramode Ranjan

2005-01-01

This paper discloses two important discoveries. These are: (i) discovery of ambiguity in the well-established laws of reflection and refraction of light which have been in regular use for many years, and (ii) discovery of generalized vectorial laws of reflection and refraction of light. The existing definitions of angle of incidence, angle of reflection and angle of refraction are considered first. Each of these definitions is found to be ambiguous, not in compliance with the fundamental definition of angle in geometry. Two typical questions (one in the case of reflection and the other for refraction) have been addressed, which cannot be dealt with by using the existing laws of reflection and refraction of light. Thus, the existing laws of reflection and refraction of light seem to be ambiguous in respect of generality and their validity in a broad sense is questionable. With a view to removing the ambiguities, proper definitions of the above three angles are given first and then the statement of the generalized vectorial law of reflection (as well as that of refraction) has been offered

A replaceable reflective film for solar concentrators

Energy Technology Data Exchange (ETDEWEB)

1991-09-01

The 3M Company manufactures a silvered acrylic film called ECP-305 that is regarded as the preferred reflective film for use on stretched-membrane heliostats. However, ECP-305 will degrade in time, due to both corrosion of the silver layer and delamination at the film's silver-to-acrylic interface, and will eventually need to be replaced. 3M uses a very aggressive adhesive on this film, and once it is laminated, replacement is very difficult. The purpose of this investigation was the development of a replaceable reflector, a reflective film that can be easily removed and replaced. A replaceable reflector was successfully configured by laminating ECP-305 to the top surface of a smooth, dimensionally stable polymer film, with a removable adhesive applied to the underside of the polymer film. Several stages of screening and testing led to the selection of a 0.010-inch thick polycarbonate (GE 8030) as the best polymer film and a medium tack tape (3M Y-9425) was selected as the best removable adhesive. To demonstrate the feasibility of the replaceable reflector concept and to provide a real-time field test, the chosen construction was successfully applied to the 50-m{sup 2} SKI heliostat at the Central Receiver Test Facility at Sandia National Laboratories in Albuquerque. 4 refs., 13 figs., 7 tabs.

Planning to break unwanted habits: habit strength moderates implementation intention effects on behaviour change.

Science.gov (United States)

Webb, Thomas L; Sheeran, Paschal; Luszczynska, Aleksandra

2009-09-01

Implementation intention formation promotes effective goal striving and goal attainment. However, little research has investigated whether implementation intentions promote behaviour change when people possess strong antagonistic habits. Experiment 1 developed relatively habitual responses that, after a task switch, had a detrimental impact on task performance. Forming an if-then plan reduced the negative impact of habit on performance. However, the effect of forming implementation intentions was smaller among participants who possessed strong habits as compared to participants who had weaker habits. Experiment 2 provided a field test of the role of habit strength in moderating the relationship between implementation intentions and behaviour in the context of smoking. Implementation intentions reduced smoking among participants with weak or moderate smoking habits, but not among participants with strong smoking habits. In summary, habit strength moderates the effectiveness of if-then plan formation in breaking unwanted habits.

Effect of the temperature and the porosity of the gettering process on the removal of heavy metals from Tunisian phosphate rock

Directory of Open Access Journals (Sweden)

R. Daik

Full Text Available Gettering is a process by which unwanted impurities are removed by providing an alternative location, this method used by many researchers for the purification of silicon wafers or powder. In this work, this method is used for the first time to remove the impurities from Tunisian phosphate rock (TPR. This method consists in two steps: the rapid thermal processing by infrared furnace followed by a rapid chemical etching. In order to enhance the efficiency of this process, a porous layer on the surface of grains was grown. By this method, we have demonstrated in this present work that the majority of impurities were well extracted from TPR. UV–visible absorption spectra show that the highest intensity of absorbance (∼1 appears for the porous sample treated at 900 °C (P900 °C, which due to the presence of large quantities of impurities in the extracted solution. These results were well confirmed by AAS and ICP-AES which show that the majority of the impurities have been almost removed for the P900 °C sample. Keywords: Gettering process, Porous phosphate rock, Temperature, Impurities

MODIFIED APPROACH FOR SITE SELECTION OF UNWANTED RADIOACTIVE SEALED SOURCES DISPOSAL IN ARID COUNTRIES (CASE STUDY - EGYPT)

International Nuclear Information System (INIS)

ABDEL AZIZ, M.A.H.; COCHRAN, J.R.

2008-01-01

The aim of this study is to present a systematic methodology for siting of radioactive sealed sources disposal in arid countries and demonstrate the use of this methodology in Egypt. Availing from the experience gained from the greater confinement disposal (GCD) boreholes in Nevada, USA, the IAEA's approach for siting of near disposal was modified to fit the siting of the borehole disposal which suits the unwanted radioactive sealed sources. The modifications are represented by dividing the surveyed area into three phases; the exclusion phase in which the areas that meet exclusion criteria should be excluded, the site selection phase in which some potential sites that meet the primary criteria should be candidate and the preference stage in which the preference between the potential candidate sites should be carried out based on secondary criteria to select one or two sites at most. In Egypt, a considerable amount of unwanted radioactive sealed sources wastes have accumulated due to the peaceful uses of radio-isotopes.Taking into account the regional aspects and combining of the proposed developed methodology with geographic information system (GIS), the Nile Delta and its valley, the Sinai Peninsula and areas of historical heritage value are excluded from our concern as potential areas for radioactive waste disposal. Using the primary search criteria, some potential sites south Kharga, the Great Sand Sea, Gilf El-Kebear and the central part of the eastern desert have been identified as candidate areas meeting the primary criteria of site selection. More detailed studies should be conducted taking into account the secondary criteria to prefer among the above sites and select one or two sites at most

Ultraviolet reflecting photonic microstructures in the King Penguin beak.

Science.gov (United States)

Dresp, Birgitta; Jouventin, Pierre; Langley, Keith

2005-09-22

King and emperor penguins (Aptenodytes patagonicus and Aptenodytes forsteri) are the only species of marine birds so far known to reflect ultraviolet (UV) light from their beaks. Unlike humans, most birds perceive UV light and several species communicate using the near UV spectrum. Indeed, UV reflectance in addition to the colour of songbird feathers has been recognized as an important signal when choosing a mate. The king penguin is endowed with several highly coloured ornaments, notably its beak horn and breast and auricular plumage, but only its beak reflects UV, a property considered to influence its sexual attraction. Because no avian UV-reflecting pigments have yet been identified, the origin of such reflections is probably structural. In an attempt to identify the structures that give rise to UV reflectance, we combined reflectance spectrophotometry and morphological analysis by both light and electron microscopy, after experimental removal of surface layers of the beak horn. Here, we characterize for the first time a multilayer reflector photonic microstructure that produces the UV reflections in the king penguin beak.

Seasonal trends in separability of leaf reflectance spectra for Ailanthus altissima and four other tree species

Science.gov (United States)

Burkholder, Aaron

This project investigated the spectral separability of the invasive species Ailanthus altissima, commonly called tree of heaven, and four other native species. Leaves were collected from Ailanthus and four native tree species from May 13 through August 24, 2008, and spectral reflectance factor measurements were gathered for each tree using an ASD (Boulder, Colorado) FieldSpec Pro full-range spectroradiometer. The original data covered the range from 350-2500 nm, with one reflectance measurement collected per one nm wavelength. To reduce dimensionality, the measurements were resampled to the actual resolution of the spectrometer's sensors, and regions of atmospheric absorption were removed. Continuum removal was performed on the reflectance data, resulting in a second dataset. For both the reflectance and continuum removed datasets, least angle regression (LARS) and random forest classification were used to identify a single set of optimal wavelengths across all sampled dates, a set of optimal wavelengths for each date, and the dates for which Ailanthus is most separable from other species. It was found that classification accuracy varies both with dates and bands used. Contrary to expectations that early spring would provide the best separability, the lowest classification error was observed on July 22 for the reflectance data, and on May 13, July 11 and August 1 for the continuum removed data. This suggests that July and August are also potentially good months for species differentiation. Applying continuum removal in many cases reduced classification error, although not consistently. Band selection seems to be more important for reflectance data in that it results in greater improvement in classification accuracy, and LARS appears to be an effective band selection tool. The optimal spectral bands were selected from across the spectrum, often with bands from the blue (401-431 nm), NIR (1115 nm) and SWIR (1985-1995 nm), suggesting that hyperspectral sensors with

Women living with facial hair: the psychological and behavioral burden.

Science.gov (United States)

Lipton, Michelle G; Sherr, Lorraine; Elford, Jonathan; Rustin, Malcolm H A; Clayton, William J

2006-08-01

While unwanted facial hair is clearly distressing for women, relatively little is known about its psychological impact. This study reports on the psychological and behavioral burden of facial hair in women with suspected polycystic ovary syndrome. Eighty-eight women (90% participation rate) completed a self-administered questionnaire concerning hair removal practices; the impact of facial hair on social and emotional domains; relationships and daily life; anxiety and depression (Hospital Anxiety and Depression Scale); self-esteem (Rosenberg Self-esteem Scale); and quality of life (WHOQOL-BREF). Women spent considerable time on the management of their facial hair (mean, 104 min/week). Two thirds (67%) reported continually checking in mirrors and 76% by touch. Forty percent felt uncomfortable in social situations. High levels of emotional distress and psychological morbidity were detected; 30% had levels of depression above the clinical cut off point, while 75% reported clinical levels of anxiety; 29% reported both. Although overall quality of life was good, scores were low in social and relationship domains--reflecting the impact of unwanted facial hair. Unwanted facial hair carries a high psychological burden for women and represents a significant intrusion into their daily lives. Psychological support is a neglected element of care for these women.

RAMBO-K: Rapid and Sensitive Removal of Background Sequences from Next Generation Sequencing Data.

Directory of Open Access Journals (Sweden)

Simon H Tausch

Full Text Available The assembly of viral or endosymbiont genomes from Next Generation Sequencing (NGS data is often hampered by the predominant abundance of reads originating from the host organism. These reads increase the memory and CPU time usage of the assembler and can lead to misassemblies.We developed RAMBO-K (Read Assignment Method Based On K-mers, a tool which allows rapid and sensitive removal of unwanted host sequences from NGS datasets. Reaching a speed of 10 Megabases/s on 4 CPU cores and a standard hard drive, RAMBO-K is faster than any tool we tested, while showing a consistently high sensitivity and specificity across different datasets.RAMBO-K rapidly and reliably separates reads from different species without data preprocessing. It is suitable as a straightforward standard solution for workflows dealing with mixed datasets. Binaries and source code (java and python are available from http://sourceforge.net/projects/rambok/.

Removing Our Masks: Using the Visual and Performing Arts to Promote Deep Reflection in Pre-Service Teachers

Science.gov (United States)

McHattan, Patty Alvarez; McCray, Erica D.

2009-01-01

The role of reflection is central to teacher preparation. As individuals integrate new information within their existing schema, they refine their practice. Through reflection pre-service teachers examine, evaluate, and adjust. Yet, the practice of reflection is rarely explicitly taught. Often teacher educators found their students aligning their…

From unwanted pregnancy to safe abortion: Sharing information about abortion in Asia through animation.

Science.gov (United States)

Krishnan, Shweta; Dalvie, Suchitra

2015-05-01

Although unsafe abortion continues to be a leading cause of maternal mortality in many countries in Asia, the right to safe abortion remains highly stigmatized across the region. The Asia Safe Abortion Partnership, a regional network advocating for safe abortion, produced an animated short film entitled From Unwanted Pregnancy to Safe Abortion to show in conferences, schools and meetings in order to share knowledge about the barriers to safe abortion in Asia and to facilitate conversations on the right to safe abortion. This paper describes the making of this film, its objectives, content, dissemination and how it has been used. Our experience highlights the advantages of using animated films in addressing highly politicized and sensitive issues like abortion. Animation helped to create powerful advocacy material that does not homogenize the experiences of women across a diverse region, and at the same time emphasize the need for joint activities that express solidarity. Copyright © 2015. Published by Elsevier Ltd.

Reducing or Eliminating Polysorbate Induced Anaphylaxis and Unwanted Immunogenicity in Biotherapeutics

Directory of Open Access Journals (Sweden)

Edward Maggio

2017-09-01

Full Text Available The increasing use of biotherapeutics across a growing spectrum of neoplastic, autoimmune, and inflammatory diseases has resulted in a corresponding increase in hypersensitivity reactions. The origins of anaphylaxis are often attributed to undefined intrinsic properties of the biotherapeutic protein itself, ignoring the broader potential negative contributions of functional excipients, in particular polyoxyethylene containing surfactants such as polysorbate 80 and polysorbate 20 (Tween 80 and Tween 20. These surfactants allow biotherapeutics to meet the stringent challenges of extended shelf-life, increased solubility, protein aggregation prevention, reduced administration volume, and satisfactory reconstitution properties in the case of lyophilized biotherapeutics. The potential negative impact of certain functional excipients on product performance characteristics such as anaphylaxis and immunogenicity is often overlooked. While regulatory authorities understandably focus heavily on comparable efficacy in evaluating biosimilars, similar efficacy does not necessarily imply a similar safety profile between the originator and biosimilar products. Both unwanted immunogenicity and anaphylaxis do comprise major components of safety assessment, however, few if any attempts are made to differentiate drug-related from excipient-related anaphylaxis. Replacement of anaphylactogenic and immunogenic functional excipients with equally effective but safer alternatives will allow biotherapeutic developers to differentiate their biotherapeutic, biosimilar, or biobetter from the large number of nearly identical competitor products, simultaneously providing a substantial commercial benefit as well as critical clinical benefits for all concerned – patients, physicians, and third party payers.

NOx removal characteristics of corona radical shower with ammonia and methylamine radical injections

Energy Technology Data Exchange (ETDEWEB)

Urashima, K.; Ara, M.; Chang, J.S. [McMaster Univ., Hamilton, ON (Canada). Dept. of Engineering Physics; Uchida, Y. [Aichi Inst. of Technology, (Japan). Dept. of Engineering

2010-07-01

Air pollutants such as nitrogen oxides (NOx) and sulfur oxides (SOx) are the major cause of acid rain. There are different types of NOx and SOx conversion techniques such as wet scrubber, selective catalytic reactor, sorbent injection, and low NOx burner. Non-thermal plasma techniques have also been utilized in commercial plants, but the energy efficiency of the non-thermal plasma reactors have not yet been optimized. The direct plasma treatments of flue gases including, the electron beam, barrier discharge and pulsed corona reactors, may lose input energy to activate unwanted components of flue gases such as carbon dioxide (CO{sub 2}) and nitrogen (N{sub 2}). The corona discharge ammonia radical shower system has demonstrated significant NOx removal with higher energy efficiency for large bench scale and pilot plant tests for combustion exhausts. An experiment has also demonstrated that methane can replace ammonia as an injection gas with less NOx removal efficiency. This paper presented an experimental investigation that compared methylamine radical injection with traditional ammonia and methane radical injections. The paper discussed the bench scale test facilities and corona radical shower plasma reactor. It was concluded that the processes to form ammonium nitrate could be observed from trace white solid particles deposited on the reactor wall as observed by scanning electron microscopy pictures. 10 refs., 5 figs., 2 appendices.

Reduction of unwanted submental fat with ATX-101 (deoxycholic acid), an adipocytolytic injectable treatment: results from a phase III, randomized, placebo-controlled study*

Science.gov (United States)

Rzany, B; Griffiths, T; Walker, P; Lippert, S; McDiarmid, J; Havlickova, B

2014-01-01

Summary Background Unwanted submental fat (SMF) is aesthetically unappealing, but methods of reduction are either invasive or lack evidence for their use. An injectable approach with ATX-101 (deoxycholic acid) is under investigation. Objectives To evaluate the efficacy and safety of ATX-101 for the reduction of unwanted SMF. Methods In this double-blind, placebo-controlled, phase III study, 363 patients with moderate/severe SMF were randomized to receive ATX-101 (1 or 2 mg cm−2) or placebo injections into their SMF at up to four treatment sessions ∽28 days apart, with a 12-week follow-up. The co-primary efficacy endpoints were the proportions of treatment responders [patients with ≥ 1-point improvement in SMF on the 5-point Clinician-Reported Submental Fat Rating Scale (CR-SMFRS)] and patients satisfied with their face and chin appearance on the Subject Self-Rating Scale (SSRS). Secondary endpoints included skin laxity, calliper measurements and patient-reported outcomes. Adverse events were monitored. Results Significantly more ATX-101 recipients met the primary endpoint criteria vs. placebo: on the clinician scale, 59·2% and 65·3% of patients treated with ATX-101 1 and 2 mg cm−2, respectively, were treatment responders vs. 23·0% for placebo (CR-SMFRS;P < 0·001); on the patient scale, 53·3% and 66·1%, respectively, vs. 28·7%, were satisfied with their face/chin appearance (SSRS;P < 0·001). Calliper measurements showed a significant reduction in SMF (P < 0·001), skin laxity was not worsened and patients reported improvements in the severity and psychological impact of SMF with ATX-101 vs. placebo. Most adverse events were transient and associated with the treatment area. Conclusions ATX-101 was effective and well tolerated for nonsurgical SMF reduction. What's already known about this topic? Unwanted submental fat (SMF) is considered aesthetically unappealing. Liposuction and face-lift are effective treatments for SMF reduction but are

Mitigation of unwanted direct and indirect land-use change - an integrated approach illustrated for palm oil, pulpwood, rubber and rice production in North and East Kalimantan, Indonesia

NARCIS (Netherlands)

Van der Laan, Carina; Wicke, Birka; Verweij, Pita A.; Faaij, André P C

2017-01-01

The widespread production of cash crops can result in the decline of forests, peatlands, rice fields and local community land. Such unwanted land-use and land-cover (LULC) change can lead to decreased carbon stocks, diminished biodiversity, displaced communities and reduced local food production. In

Integrating sphere based reflectance measurements for small-area semiconductor samples

Science.gov (United States)

Saylan, S.; Howells, C. T.; Dahlem, M. S.

2018-05-01

This article describes a method that enables reflectance spectroscopy of small semiconductor samples using an integrating sphere, without the use of additional optical elements. We employed an inexpensive sample holder to measure the reflectance of different samples through 2-, 3-, and 4.5-mm-diameter apertures and applied a mathematical formulation to remove the bias from the measured spectra caused by illumination of the holder. Using the proposed method, the reflectance of samples fabricated using expensive or rare materials and/or low-throughput processes can be measured. It can also be incorporated to infer the internal quantum efficiency of small-area, research-level solar cells. Moreover, small samples that reflect light at large angles and develop scattering may also be measured reliably, by virtue of an integrating sphere insensitive to directionalities.

Unwanted sexual experiences in young men: evidence from a survey of university students in Chile.

Science.gov (United States)

Lehrer, Jocelyn A; Lehrer, Evelyn L; Koss, Mary P

2013-02-01

The public health problem of unwanted sexual experiences (USE) in male youths has received little attention. In this study, we examined prevalence of USE, risk factors, contexts, and barriers to disclosure with data from a quantitative survey of students enrolled in General Education courses at a public university in Chile. This study focused on the male sample (N = 466). Approximately 20.4 % of participants reported some form of USE since age 14. Forced sex through physical coercion, forced sex through verbal coercion or while intoxicated, attempted forced sex, and less severe forms of USE were reported by 0.2, 10.1, 1.4, and 8.7 % of participants, respectively. USE before age 14 was reported by 9.4 % of participants and was a significant predictor of USE since age 14 (AOR 6.38, 95 % CI 3.22-12.65, p Chile and elsewhere.

Selective dry etching of silicon containing anti-reflective coating

Science.gov (United States)

Sridhar, Shyam; Nolan, Andrew; Wang, Li; Karakas, Erdinc; Voronin, Sergey; Biolsi, Peter; Ranjan, Alok

2018-03-01

Multi-layer patterning schemes involve the use of Silicon containing Anti-Reflective Coating (SiARC) films for their anti-reflective properties. Patterning transfer completion requires complete and selective removal of SiARC which is very difficult due to its high silicon content (>40%). Typically, SiARC removal is accomplished through a non-selective etch during the pattern transfer process using fluorine containing plasmas, or an ex-situ wet etch process using hydrofluoric acid is employed to remove the residual SiARC, post pattern transfer. Using a non-selective etch may result in profile distortion or wiggling, due to distortion of the underlying organic layer. The drawbacks of using wet etch process for SiARC removal are increased overall processing time and the need for additional equipment. Many applications may involve patterning of active structures in a poly-Si layer with an underlying oxide stopping layer. In such applications, SiARC removal selective to oxide using a wet process may prove futile. Removing SiARC selectively to SiO2 using a dry etch process is also challenging, due to similarity in the nature of chemical bonds (Si - O) in the two materials. In this work, we present highly selective etching of SiARC, in a plasma driven by a surface wave radial line slot antenna. The first step in the process involves an in-situ modification of the SiARC layer in O2 plasma followed by selective etching in a NF3/H2 plasma. Surface treatment in O2 plasma resulted in enhanced etching of the SiARC layer. For the right processing conditions, in-situ NF3/H2 dry etch process demonstrated selectivity values greater than 15:1 with respect to SiO2. The etching chemistry, however, was sensitive to NF3:H2 gas ratio. For dilute NF3 in H2, no SiARC etching was observed. Presumably, this is due to the deposition of ammonium fluorosilicate layer that occurs for dilute NF3/H2 plasmas. Additionally, challenges involved in selective SiARC removal (selective to SiO2, organic

Removal and recovery of molybdenum from aqueous solutions by adsorption onto Surfactant-Modified coir pith, a lignocellulosic polymer

Energy Technology Data Exchange (ETDEWEB)

Namasivayam, Chinnaiya [Environmental Chemistry Division, Department of Environmental Sciences, Bharathiar University, Coimbatore (India); Sureshkumar, Molagoundanpalayam Venkatachalam [Department of Chemistry, PARK College of Engineering and Technology, Coimbatore (India)

2009-01-15

Coconut coir pith, a lignocellulosic polymer, is an unwanted by-product of the coir fiber industry. The pith was used as a biosorbent for the removal of Molybdenum(VI) after modification with a cationic surfactant, hexadecyltrimethylammonium bromide. The optimum pH for maximum adsorption of Mo(VI) was found to be 3.0. Langmuir, Freundlich and Dubinin Radushkevich isotherms were used to model the adsorption equilibrium data and the system was seen to follow all three isotherms. The Langmuir adsorption capacity of the biosorbent was found to be 57.5 mg g{sup -1}. Kinetic studies showed that the adsorption generally obeyed a second-order kinetic model. Desorption studies showed that the recovery of Mo(VI) from the spent adsorbent was feasible. The effect of foreign anions on the adsorption of Mo(VI) was also examined. (Abstract Copyright [2009], Wiley Periodicals, Inc.)

Correction for reflected sky radiance in low-altitude coastal hyperspectral images.

Science.gov (United States)

Kim, Minsu; Park, Joong Yong; Kopilevich, Yuri; Tuell, Grady; Philpot, William

2013-11-10

Low-altitude coastal hyperspectral imagery is sensitive to reflections of sky radiance at the water surface. Even in the absence of sun glint, and for a calm water surface, the wide range of viewing angles may result in pronounced, low-frequency variations of the reflected sky radiance across the scan line depending on the solar position. The variation in reflected sky radiance can be obscured by strong high-spatial-frequency sun glint and at high altitude by path radiance. However, at low altitudes, the low-spatial-frequency sky radiance effect is frequently significant and is not removed effectively by the typical corrections for sun glint. The reflected sky radiance from the water surface observed by a low-altitude sensor can be modeled in the first approximation as the sum of multiple-scattered Rayleigh path radiance and the single-scattered direct-solar-beam radiance by the aerosol in the lower atmosphere. The path radiance from zenith to the half field of view (FOV) of a typical airborne spectroradiometer has relatively minimal variation and its reflected radiance to detector array results in a flat base. Therefore the along-track variation is mostly contributed by the forward single-scattered solar-beam radiance. The scattered solar-beam radiances arrive at the water surface with different incident angles. Thus the reflected radiance received at the detector array corresponds to a certain scattering angle, and its variation is most effectively parameterized using the downward scattering angle (DSA) of the solar beam. Computation of the DSA must account for the roll, pitch, and heading of the platform and the viewing geometry of the sensor along with the solar ephemeris. Once the DSA image is calculated, the near-infrared (NIR) radiance from selected water scan lines are compared, and a relationship between DSA and NIR radiance is derived. We then apply the relationship to the entire DSA image to create an NIR reference image. Using the NIR reference image

Characterization of landfill leachates and studies on heavy metal removal.

Science.gov (United States)

Ceçen, F; Gürsoy, G

2000-10-01

This study covers a thorough characterisation of landfill leachates emerging from a sanitary landfill area. The landfill leachates were obtained in the acidic stage of landfill stabilisation. Their organic content was high as reflected by the high BOD5 (5 day biological oxygen demand) and COD (chemical oxygen demand) values. They were also highly polluted in terms of the parameters TKN (total Kjeldahl nitrogen), NH4-N, alkalinity, hardness and heavy metals. Nickel was present in these wastewaters at a significant concentration. With regard to the high heavy metal content of these wastewaters, several physicochemical removal alternatives for the heavy metals Cu, Pb, Zn, Ni, Cd, Cr, Mn and Fe were tested using coagulation, flocculation, precipitation, base addition and aeration. Additionally, COD removal and ammonia stripping were examined. Co-precipitation with either alum or iron salts did not usually lead to significantly higher heavy metal removal than lime alone. The major methods leading to an effective heavy metal removal were aeration and lime addition. Nickel and cadmium seemed to be strongly complexed and were not removed by any method. Also lead removal proved to be difficult. The results are also discussed in terms of compliance with standards.

75 FR 17857 - Removal of Obsolete References to Herbicides Containing Dioxin

Science.gov (United States)

2010-04-08

... Herbicides Containing Dioxin AGENCY: Department of Veterans Affairs. ACTION: Final rule. SUMMARY: The... health effects of exposure to herbicides containing dioxin and radiation to remove the obsolete references to herbicides containing dioxin. This final rule reflects changes made by the Agent Orange Act of...

Pegasus International, Inc. coating removal systems

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-02-01

The Pegasus Coating Removal System (PCRS) was demonstrated at Florida International University (FIU) where it was being evaluated for efficiency and cost. In conjunction with the FIU testing demonstration, a human factors assessment was conducted to assess the hazards and associated safety and health issues of concern for workers utilizing this technology. The PCRS is a chemical paste that is applied to the surface using a brush, roller, or airless sprayer. After the type of PCRS, thickness, and dwell time have been determined, a laminated backed material is placed on top of the chemical paste to slow down the drying process and to provide a mechanism to strip-off the chemical. After the dwell time is reached, the chemical substrate can be removed. Scrapers may be used to break-loose the layers as necessary or to break-loose the layers that are not removed when the laminated paper is picked up. Residue may also be cleaned off of the surface with a damp sponge with an agitating motion, absorbent sponges, or a vacuum, as needed. The paint and removal agent is then placed in drums for disposal at a later time. During the assessment sampling was conducted for organic vapors and general observational techniques were conducted for ergonomics. Recommendations for improved worker safety and health during application and removal of the PCRS include: (1) work practices that reflect avoidance of exposure or reducing the risk of exposure; (2) assuring all PPE and equipment are compatible with the chemicals being used; (3) work practices that reduce the worker`s need to walk on the slippery surface caused by the chemical or the use of special anti-slip soles; (4) careful control of overspray (if a spray application is used); and (5) the use of ergonomically designed long-handled tools to apply and remove the chemical (to alleviate some of the ergonomic concerns).

Perona Malik anisotropic diffusion model using Peaceman Rachford scheme on digital radiographic image

International Nuclear Information System (INIS)

Halim, Suhaila Abd; Razak, Rohayu Abd; Ibrahim, Arsmah; Manurung, Yupiter HP

2014-01-01

In image processing, it is important to remove noise without affecting the image structure as well as preserving all the edges. Perona Malik Anisotropic Diffusion (PMAD) is a PDE-based model which is suitable for image denoising and edge detection problems. In this paper, the Peaceman Rachford scheme is applied on PMAD to remove unwanted noise as the scheme is efficient and unconditionally stable. The capability of the scheme to remove noise is evaluated on several digital radiography weld defect images computed using MATLAB R2009a. Experimental results obtained show that the Peaceman Rachford scheme improves the image quality substantially well based on the Peak Signal to Noise Ratio (PSNR). The Peaceman Rachford scheme used in solving the PMAD model successfully removes unwanted noise in digital radiographic image

Perona Malik anisotropic diffusion model using Peaceman Rachford scheme on digital radiographic image

Energy Technology Data Exchange (ETDEWEB)

Halim, Suhaila Abd; Razak, Rohayu Abd; Ibrahim, Arsmah [Center of Mathematics Studies, Faculty of Computer and Mathematical Sciences, Universiti Teknologi MARA, 40450 Shah Alam. Selangor DE (Malaysia); Manurung, Yupiter HP [Advanced Manufacturing Technology Excellence Center (AMTEx), Faculty of Mechanical Engineering, Universiti Teknologi MARA, 40450 Shah Alam. Selangor DE (Malaysia)

2014-06-19

In image processing, it is important to remove noise without affecting the image structure as well as preserving all the edges. Perona Malik Anisotropic Diffusion (PMAD) is a PDE-based model which is suitable for image denoising and edge detection problems. In this paper, the Peaceman Rachford scheme is applied on PMAD to remove unwanted noise as the scheme is efficient and unconditionally stable. The capability of the scheme to remove noise is evaluated on several digital radiography weld defect images computed using MATLAB R2009a. Experimental results obtained show that the Peaceman Rachford scheme improves the image quality substantially well based on the Peak Signal to Noise Ratio (PSNR). The Peaceman Rachford scheme used in solving the PMAD model successfully removes unwanted noise in digital radiographic image.

Slow neutron total cross-section, transmission and reflection calculation for poly- and mono-NaCl and PbF2 crystals

Science.gov (United States)

Mansy, Muhammad S.; Adib, M.; Habib, N.; Bashter, I. I.; Morcos, H. N.; El-Mesiry, M. S.

2016-10-01

A detailed study about the calculation of total neutron cross-section, transmission and reflection from crystalline materials was performed. The developed computer code is approved to be sufficient for the required calculations, also an excellent agreement has been shown when comparing the code results with the other calculated and measured values. The optimal monochromator and filter parameters were discussed in terms of crystal orientation, mosaic spread, and thickness. Calculations show that 30 cm thick of PbF2 poly-crystal is an excellent cold neutron filter producing neutron wavelengths longer than 0.66 nm needed for the investigation of magnetic structure experiments. While mono-crystal filter PbF2 cut along its (1 1 1), having mosaic spread (η = 0.5°) and thickness 10 cm can only transmit thermal neutrons of the desired wavelengths and suppress epithermal and γ-rays forming unwanted background, when it is cooled to liquid nitrogen temperature. NaCl (2 0 0) and PbF2 (1 1 1) monochromator crystals having mosaic spread (η = 0.5°) and thickness 10 mm shows high neutron reflectivity for neutron wavelengths (λ = 0.114 nm and λ = 0.43 nm) when they used as a thermal and cold neutron monochromators respectively with very low contamination from higher order reflections.

In-depth study of in-trap high-resolution mass separation by transversal ion ejection from a multi-reflection time-of-flight device.

Science.gov (United States)

Fischer, Paul; Knauer, Stefan; Marx, Gerrit; Schweikhard, Lutz

2018-01-01

The recently introduced method of ion separation by transversal ejection of unwanted species in electrostatic ion-beam traps and multi-reflection time-of-flight devices has been further studied in detail. As this separation is performed during the ion storage itself, there is no need for additional external devices such as ion gates or traps for either pre- or postselection of the ions of interest. The ejection of unwanted contaminant ions is performed by appropriate pulses of the potentials of deflector electrodes. These segmented ring electrodes are located off-center in the trap, i.e., between one of the two ion mirrors and the central drift tube, which also serves as a potential lift for capturing incoming ions and axially ejecting ions of interest after their selection. The various parameters affecting the selection effectivity and resolving power are illustrated with tin-cluster measurements, where isotopologue ion species provide mass differences down to a single atomic mass unit at ion masses of several hundred. Symmetric deflection voltages of only 10 V were found sufficient for the transversal ejection of ion species with as few as three deflection pulses. The duty cycle, i.e., the pulse duration with respect to the period of ion revolution, has been varied, resulting in resolving powers of up to several tens of thousands for this selection technique.

Social issues around advanced unwanted pregnancies in rural single women.

Science.gov (United States)

Chhabra, S; Palaparthy, S; Mishra, S

2009-05-01

This study covers issues on advanced unwanted pregnancies in rural single women in South-east Asia, with reference to age, education, occupation, person responsible (i.e. baby's father) and reasons for delay in seeking assistance. It describes single women with pregnancy beyond the time for abortion, as set by the Indian abortion law. The study involved 314 girls/women and was set in the Mahatma Gandhi Institute of Medical Sciences, Sevagram, India. The girls/women were admitted, provided with free facilities and had their babies looked after by hospital staff until given up for adoption, or otherwise. The outcomes of the study showed that most individuals (71.01%) were rural, less-literate, working girls. In 94.26% of cases, the baby's father was known; 24 (7.64%) reported rape (13 by a known person). A total of 66 individuals (21.02%) did not inform their parents about the pregnancy for up to 5 months. Five (1.59%) went to unqualified medical practitioners and 16.56% to private practitioners who did not give their services. A total of 47 (14.96%) had waited for the person responsible for their pregnancy before seeking assistance. There was a total of 315 babies born to 310 mothers (five twins); four absconded undelivered; 13 absconded after delivery (two with their babies, 11 leaving babies). The study found that pregnancies were often caused by rape and girls/women with no knowledge of abortion laws, shyness, fear, lack of desired privacy, lack of resources, misleading management at periphery all went beyond 20 weeks. Mostly, the babies were not accepted--the girls married the babies' fathers, but left their babies. Emergency contraception for unprotected sexual intercourse is essential.

Negative Effects of Psychological Treatments: An Exploratory Factor Analysis of the Negative Effects Questionnaire for Monitoring and Reporting Adverse and Unwanted Events.

Science.gov (United States)

Rozental, Alexander; Kottorp, Anders; Boettcher, Johanna; Andersson, Gerhard; Carlbring, Per

2016-01-01

Research conducted during the last decades has provided increasing evidence for the use of psychological treatments for a number of psychiatric disorders and somatic complaints. However, by focusing only on the positive outcomes, less attention has been given to the potential of negative effects. Despite indications of deterioration and other adverse and unwanted events during treatment, little is known about their occurrence and characteristics. Hence, in order to facilitate research of negative effects, a new instrument for monitoring and reporting their incidence and impact was developed using a consensus among researchers, self-reports by patients, and a literature review: the Negative Effects Questionnaire. Participants were recruited via a smartphone-delivered self-help treatment for social anxiety disorder and through the media (N = 653). An exploratory factor analysis was performed, resulting in a six-factor solution with 32 items, accounting for 57.64% of the variance. The derived factors were: symptoms, quality, dependency, stigma, hopelessness, and failure. Items related to unpleasant memories, stress, and anxiety were experienced by more than one-third of the participants. Further, increased or novel symptoms, as well as lack of quality in the treatment and therapeutic relationship rendered the highest self-reported negative impact. In addition, the findings were discussed in relation to prior research and other similar instruments of adverse and unwanted events, giving credence to the items that are included. The instrument is presently available in eleven different languages and can be freely downloaded and used from www.neqscale.com.

Reflecting reflection in supervision

DEFF Research Database (Denmark)

Lystbæk, Christian Tang

associated with reflection and an exploration of alternative conceptions that view reflection within the context of settings which have a more group- and team-based orientation. Drawing on an action research project on health care supervision, the paper questions whether we should reject earlier views...... of reflection, rehabilitate them in order to capture broader connotations or move to new ways of regarding reflection that are more in keeping with not only reflective but also emotive, normative and formative views on supervision. The paper presents a critical perspective on supervision that challenge...... the current reflective paradigm I supervision and relate this to emotive, normative and formative views supervision. The paper is relevant for Nordic educational research into the supervision and guidance...

An Operational Scheme for Deriving Standardised Surface Reflectance from Landsat TM/ETM+ and SPOT HRG Imagery for Eastern Australia

Directory of Open Access Journals (Sweden)

Neil Flood

2013-01-01

Full Text Available Operational monitoring of vegetation and land surface change over large areas can make good use of satellite sensors that measure radiance reflected from the Earth’s surface. Monitoring programs use multiple images for complete spatial coverage over time. Accurate retrievals of vegetation cover and vegetation change estimates can be hampered by variation, in both space and time, in the measured radiance, caused by atmospheric conditions, topography, sensor location, and sun elevation. In order to obtain estimates of cover that are comparable between images, and to retrieve accurate estimates of change, these sources of variation must be removed. In this paper we present a preprocessing scheme for minimising atmospheric, topographic and bi-directional reflectance effects on Landsat-5 TM, Landsat-7 ETM+ and SPOT-5 HRG imagery. The approach involves atmospheric correction to compute surface-leaving radiance, and bi-directional reflectance modelling to remove the effects of topography and angular variation in reflectance. The bi-directional reflectance model has been parameterised for eastern Australia, but the general approach is more widely applicable. The result is surface reflectance standardised to a fixed viewing and illumination geometry. The method can be applied to the entire record for these instruments, without intervention, which is of increasing importance with the increased availability of long term image archives. Validation shows that the corrections improve the estimation of reflectance at any given angular configuration, thus allowing the removal from the reflectance signal of much variation due to factors independent of the land surface. The method has been used to process over 45,000 Landsat-5 TM and Landsat-7 ETM+ scenes and 2,500 SPOT-5 scenes, over eastern Australia, and is now in use in operational monitoring programs.

Classification of Clean and Dirty Pighouse Surfaces Based on Spectral Reflectance

DEFF Research Database (Denmark)

Blanke, Mogens; Braithwaite, Ian David; Zhang, Guo-Qiang

2004-01-01

of designing a vision based system to locate dirty areas and subsequently direct a cleaning robot to remove dirt. Novel results include the characterisation of the spectral reflectance of real surfaces and dirt in a pig house and the design of illumination to obtain discrimination of clean from dirty areas...

Twin-image reduction in inline digital holography using an object segmentation heuristic

International Nuclear Information System (INIS)

McElhinney, Conor P; Hennelly, Bryan M; Naughton, Thomas J

2008-01-01

We present a digital image processing heuristic for the removal of the twin-image in inline digital holograms. Typically, the unwanted twin manifests itself as visible corruptive noise in the reconstruction plane. We reconstruct the unwanted twin-image at its in-focus plane and suppress it by first finding the boundary of the object, and then removing the optical energy within this boundary. In this plane, the wanted twin-image optical energy is largely dispersed outside this boundary and so it is retained. The heuristic's effectiveness is demonstrated using a digital hologram of a real-world object.

Twin-image reduction in inline digital holography using an object segmentation heuristic

Energy Technology Data Exchange (ETDEWEB)

McElhinney, Conor P; Hennelly, Bryan M [Department of Computer Science, National University of Ireland, Maynooth, County Kildare (Ireland); Naughton, Thomas J [University of Oulu, RFMedia Laboratory, Oulu Southern Institute, Vierimaantie 5, 84100 Ylivieska (Finland)], E-mail: conormce@cs.nuim.ie, E-mail: tomn@cs.nuim.ie

2008-11-01

We present a digital image processing heuristic for the removal of the twin-image in inline digital holograms. Typically, the unwanted twin manifests itself as visible corruptive noise in the reconstruction plane. We reconstruct the unwanted twin-image at its in-focus plane and suppress it by first finding the boundary of the object, and then removing the optical energy within this boundary. In this plane, the wanted twin-image optical energy is largely dispersed outside this boundary and so it is retained. The heuristic's effectiveness is demonstrated using a digital hologram of a real-world object.

Continuum removed band depth analysis for detecting the effects of natural gas, methane and ethane on maize reflectance

NARCIS (Netherlands)

Noomen, M.F.; Skidmore, A.K.; Meer, van der F.D.; Prins, H.H.T.

2006-01-01

It is known that natural gas in the soil affects vegetation health, which may be detected through analysis of reflectance spectra. Since natural gas is invisible, changes in the vegetation could potentially indicate gas leakage. Although it is known that gas in soil affects plant reflectance, the

Reflectance of Antarctic surfaces from multispectral radiometers: The correction of atmospheric effects

International Nuclear Information System (INIS)

Zibordi, G.; Maracci, G.

1993-01-01

Monitoring reflectance of polar icecaps has relevance in climate studies. In fact, climate changes produce variations in the morphology of ice and snow covers, which are detectable as surface reflectance change. Surface reflectance can be retrieved from remotely sensed data. However, absolute values independent of atmospheric turbidity and surface altitude can only be obtained after removing masking effects of the atmosphere. An atmospheric correction model, accounting for surface and sensor altitudes above sea level, is described and validated through data detected over Antarctic surfaces with a Barnes Modular Multispectral Radiometer having bands overlapping those of the Landsat Thematic Mapper. The model is also applied in a sensitivity analysis to investigate error induced in reflectance obtained from satellite data by indeterminacy in optical parameters of atmospheric constituents. Results show that indeterminacy in the atmospheric water vapor optical thickness is the main source of nonaccuracy in the retrieval of surface reflectance from data remotely sensed over Antarctic regions

Standardizing terms, definitions and concepts for describing and interpreting unwanted immunogenicity of biopharmaceuticals: recommendations of the Innovative Medicines Initiative ABIRISK consortium.

Science.gov (United States)

Rup, B; Pallardy, M; Sikkema, D; Albert, T; Allez, M; Broet, P; Carini, C; Creeke, P; Davidson, J; De Vries, N; Finco, D; Fogdell-Hahn, A; Havrdova, E; Hincelin-Mery, A; C Holland, M; H Jensen, P E; Jury, E C; Kirby, H; Kramer, D; Lacroix-Desmazes, S; Legrand, J; Maggi, E; Maillère, B; Mariette, X; Mauri, C; Mikol, V; Mulleman, D; Oldenburg, J; Paintaud, G; R Pedersen, C; Ruperto, N; Seitz, R; Spindeldreher, S; Deisenhammer, F

2015-09-01

Biopharmaceuticals (BPs) represent a rapidly growing class of approved and investigational drug therapies that is contributing significantly to advancing treatment in multiple disease areas, including inflammatory and autoimmune diseases, genetic deficiencies and cancer. Unfortunately, unwanted immunogenic responses to BPs, in particular those affecting clinical safety or efficacy, remain among the most common negative effects associated with this important class of drugs. To manage and reduce risk of unwanted immunogenicity, diverse communities of clinicians, pharmaceutical industry and academic scientists are involved in: interpretation and management of clinical and biological outcomes of BP immunogenicity, improvement of methods for describing, predicting and mitigating immunogenicity risk and elucidation of underlying causes. Collaboration and alignment of efforts across these communities is made difficult due to lack of agreement on concepts, practices and standardized terms and definitions related to immunogenicity. The Innovative Medicines Initiative (IMI; www.imi-europe.org), ABIRISK consortium [Anti-Biopharmaceutical (BP) Immunization Prediction and Clinical Relevance to Reduce the Risk; www.abirisk.eu] was formed by leading clinicians, academic scientists and EFPIA (European Federation of Pharmaceutical Industries and Associations) members to elucidate underlying causes, improve methods for immunogenicity prediction and mitigation and establish common definitions around terms and concepts related to immunogenicity. These efforts are expected to facilitate broader collaborations and lead to new guidelines for managing immunogenicity. To support alignment, an overview of concepts behind the set of key terms and definitions adopted to date by ABIRISK is provided herein along with a link to access and download the ABIRISK terms and definitions and provide comments (http://www.abirisk.eu/index_t_and_d.asp). © 2015 British Society for Immunology.

Removing NDMA (N,N-dimethylnitrosamine) from natural waters

Energy Technology Data Exchange (ETDEWEB)

Mezyk, S P [California State University Long Beach, (United States); Cooper, W J [University of North Carolina at Wilmington, (United States); Bartels, D M [Argonne National Laboratory, (United States)

2003-07-01

Nitrosoamines are ubiquitous in water environments, and are of concern as they are potent carcinogens. In particular, N,N-dimethylnitrosamine (NDMA, (CH{sub 3}){sub 2} NNO) is volatile, and therefore has been detected around factories producing secondary amines or rocket fuel, in areas near industrial plants that use dimethylamine in organic synthesis, and even in foods and beverages that contain nitrite or which have been exposed to nitrous oxides. Various technologies have been suggested for removing trace levels of NDMA contamination from aqueous systems. However, Advanced Oxidation Technologies (AOTs), such as ozone, UV/ozone, and UV/H{sub 2}O{sub 2} , which use oxidation via the hydroxyl radical ({sup .}OH), or heterogeneous catalysis by TiO{sub 2} , sonolysis, or the electron beam process, which produce a mixture of oxidizing {sup .}OH radicals with reducing hydrated electrons (e{sup -}{sub aq} ) and hydrogen atoms ({sup .} H), may also produce unwanted stable products in the treatment. Some of these stable products, such as secondary amines, allow regeneration of NDMA to occur. To ensure that any process applied to NDMA contaminated water occurs efficiently and quantitatively a complete understanding of the chemistry involved under the conditions of use is necessary. This requires mathematical modeling of the process, which in turn needs reaction rate constants and mechanisms. In this study, absolute rate constants at room temperature for the reaction of the hydroxyl radical, hydrated electron, and hydrogen atom with NDMA in water have been determined using electron pulse radiolysis and absorption spectroscopy, (e{sup -}{sub aq} and {sup .}OH) and EPR free induction decay attenuation ({sup .}H) measurements. The specific values of (4.30{+-} 0.12) x 10 8 , (1.41 {+-} 0.02) x 10 10 , and (2.01 {+-} 0.03) x 10{sup 8} M{sup -1} s{sup -1} , respectively, demonstrate that the reductive destruction of this nitrosoamine would be the dominant removal pathway in any

Removing NDMA (N,N-dimethylnitrosamine) from natural waters

International Nuclear Information System (INIS)

Mezyk, S.P.; Cooper, W.J.; Bartels, D.M.

2003-01-01

Nitrosoamines are ubiquitous in water environments, and are of concern as they are potent carcinogens. In particular, N,N-dimethylnitrosamine (NDMA, (CH 3 ) 2 NNO) is volatile, and therefore has been detected around factories producing secondary amines or rocket fuel, in areas near industrial plants that use dimethylamine in organic synthesis, and even in foods and beverages that contain nitrite or which have been exposed to nitrous oxides. Various technologies have been suggested for removing trace levels of NDMA contamination from aqueous systems. However, Advanced Oxidation Technologies (AOTs), such as ozone, UV/ozone, and UV/H 2 O 2 , which use oxidation via the hydroxyl radical ( . OH), or heterogeneous catalysis by TiO 2 , sonolysis, or the electron beam process, which produce a mixture of oxidizing . OH radicals with reducing hydrated electrons (e - aq ) and hydrogen atoms ( . H), may also produce unwanted stable products in the treatment. Some of these stable products, such as secondary amines, allow regeneration of NDMA to occur. To ensure that any process applied to NDMA contaminated water occurs efficiently and quantitatively a complete understanding of the chemistry involved under the conditions of use is necessary. This requires mathematical modeling of the process, which in turn needs reaction rate constants and mechanisms. In this study, absolute rate constants at room temperature for the reaction of the hydroxyl radical, hydrated electron, and hydrogen atom with NDMA in water have been determined using electron pulse radiolysis and absorption spectroscopy, (e - aq and . OH) and EPR free induction decay attenuation ( . H) measurements. The specific values of (4.30± 0.12) x 10 8 , (1.41 ± 0.02) x 10 10 , and (2.01 ± 0.03) x 10 8 M -1 s -1 , respectively, demonstrate that the reductive destruction of this nitrosoamine would be the dominant removal pathway in any remediation process. Based on these data we have begun modeling the large-scale electron

Negative Effects of Psychological Treatments: An Exploratory Factor Analysis of the Negative Effects Questionnaire for Monitoring and Reporting Adverse and Unwanted Events

Science.gov (United States)

Kottorp, Anders; Boettcher, Johanna; Andersson, Gerhard; Carlbring, Per

2016-01-01

Research conducted during the last decades has provided increasing evidence for the use of psychological treatments for a number of psychiatric disorders and somatic complaints. However, by focusing only on the positive outcomes, less attention has been given to the potential of negative effects. Despite indications of deterioration and other adverse and unwanted events during treatment, little is known about their occurrence and characteristics. Hence, in order to facilitate research of negative effects, a new instrument for monitoring and reporting their incidence and impact was developed using a consensus among researchers, self-reports by patients, and a literature review: the Negative Effects Questionnaire. Participants were recruited via a smartphone-delivered self-help treatment for social anxiety disorder and through the media (N = 653). An exploratory factor analysis was performed, resulting in a six-factor solution with 32 items, accounting for 57.64% of the variance. The derived factors were: symptoms, quality, dependency, stigma, hopelessness, and failure. Items related to unpleasant memories, stress, and anxiety were experienced by more than one-third of the participants. Further, increased or novel symptoms, as well as lack of quality in the treatment and therapeutic relationship rendered the highest self-reported negative impact. In addition, the findings were discussed in relation to prior research and other similar instruments of adverse and unwanted events, giving credence to the items that are included. The instrument is presently available in eleven different languages and can be freely downloaded and used from www.neqscale.com. PMID:27331907

Negative Effects of Psychological Treatments: An Exploratory Factor Analysis of the Negative Effects Questionnaire for Monitoring and Reporting Adverse and Unwanted Events.

Directory of Open Access Journals (Sweden)

Alexander Rozental

Full Text Available Research conducted during the last decades has provided increasing evidence for the use of psychological treatments for a number of psychiatric disorders and somatic complaints. However, by focusing only on the positive outcomes, less attention has been given to the potential of negative effects. Despite indications of deterioration and other adverse and unwanted events during treatment, little is known about their occurrence and characteristics. Hence, in order to facilitate research of negative effects, a new instrument for monitoring and reporting their incidence and impact was developed using a consensus among researchers, self-reports by patients, and a literature review: the Negative Effects Questionnaire. Participants were recruited via a smartphone-delivered self-help treatment for social anxiety disorder and through the media (N = 653. An exploratory factor analysis was performed, resulting in a six-factor solution with 32 items, accounting for 57.64% of the variance. The derived factors were: symptoms, quality, dependency, stigma, hopelessness, and failure. Items related to unpleasant memories, stress, and anxiety were experienced by more than one-third of the participants. Further, increased or novel symptoms, as well as lack of quality in the treatment and therapeutic relationship rendered the highest self-reported negative impact. In addition, the findings were discussed in relation to prior research and other similar instruments of adverse and unwanted events, giving credence to the items that are included. The instrument is presently available in eleven different languages and can be freely downloaded and used from www.neqscale.com.

An experimental and analytical investigation into the effects of process vibrations on material removal rates during polishing

Science.gov (United States)

Mullany, B.; Mainuddin, M.; Williams, W.; Keanini, R.

2013-06-01

Experimental testing, using both commercially available polishing machines and a specially built test platform, demonstrates that material removal rates (MRRs) observed during polishing of fused silica are strongly affected by nanometer-scale vibration amplitudes. Specifically, a nanometer level increase in system vibrations can produce MRRs approximately 150% higher than on an inherently smoother running machine. Moreover the higher spatial frequency surface roughness values are little-effected by the spectral content of the polishing machine. Polishing under controlled conditions, using the test platform, shows that for vibration amplitudes, A ≲ 1.6 μm, and over a fairly wide range of vibration frequencies, MRR increases almost linearly with increasing input power. By contrast, for A ≳ 10 μm, MRR exhibits a rapid decay with increasing A. Order of magnitude analyses and physical arguments are presented in order to explain the qualitatively distinct MRR trends observed. In the small-amplitude limit, A ≲ 1.6 μm, two arguments are presented which suggest that the total observed removal rate, MRRtot, reflects the superposed action of chemical-mechanical removal, MRRcm, and vibration-driven, flow-induced removal, MRRflow, i.e., MRRtot=MRRcm+MRRflow. The analyses further indicate that MRRflow primarily reflects cyclic viscous shears and pressure gradients extant within the thin, non-Newtonian slurry film that exists between the polishing tool and workpiece. Shears and pressure gradients, and corresponding flow-induced MRRs, are, in turn, found to scale as √A /do ω, where A is the vibration amplitude, do is the characteristic gap thickness between the tool and workpiece, and ω is the vibration frequency. In the large-amplitude limit, A ≳ 5 μm, experimental measurements and a simple scaling argument show that the polishing slurry film becomes thick enough that the workpiece and polishing tool lose direct contact. In this limit, observed MRRs thus reflect

In vitro assessment of the effectiveness of whitening dentifrices for the removal of extrinsic tooth stains

Directory of Open Access Journals (Sweden)

Débora Alves Nunes Leite Lima

2008-06-01

Full Text Available This in vitro study evaluated the effectiveness of whitening dentifrices for the removal of extrinsic tooth stains. Twenty dental blocks (4 x 4 mm, including enamel and dentine, removed from freshly extracted bovine incisors, were randomly divided into 4 groups: G1 - distilled water, G2 - Colgate, G3 - Crest Extra Whitening and G4 - Rapid White. In all specimens, the dentin was covered with colorless nail polish, and the enamel was left exposed. Next, the specimens were immersed in a solution of black tea, which was changed every 24 h, for a period of 6 days. After this period, a photo-reflectance reading was taken (Time 1 with a spectrometer. The stained specimens were then submitted to linear brushing movements (5,000 cycles using brushes (Oral B-Soft coupled to an automatic toothbrushing machine, under a static axial load of 200 g and with a speed of 4 movements/second, at 37°C, with the dentifrice or water being injected every 60 s. When toothbrushing ended, a second photo-reflectance reading was taken (Time 2. The results were submitted to two-criteria analysis of variance (ANOVA and to the Tukey test ( = 0.05. When the two times for a same group were compared, Time 2 presented the highest reflectance values with statistical difference only for G3 and G4. Among the dentifrices tested, only the Rapid White group differed from the control group, presenting the highest reflectance values. Only the whitening dentifrice Rapid White was effective for the removal of extrinsic stains.

Cat Swarm Optimization Based Functional Link Artificial Neural Network Filter for Gaussian Noise Removal from Computed Tomography Images

Directory of Open Access Journals (Sweden)

M. Kumar

2016-01-01

Full Text Available Gaussian noise is one of the dominant noises, which degrades the quality of acquired Computed Tomography (CT image data. It creates difficulties in pathological identification or diagnosis of any disease. Gaussian noise elimination is desirable to improve the clarity of a CT image for clinical, diagnostic, and postprocessing applications. This paper proposes an evolutionary nonlinear adaptive filter approach, using Cat Swarm Functional Link Artificial Neural Network (CS-FLANN to remove the unwanted noise. The structure of the proposed filter is based on the Functional Link Artificial Neural Network (FLANN and the Cat Swarm Optimization (CSO is utilized for the selection of optimum weight of the neural network filter. The applied filter has been compared with the existing linear filters, like the mean filter and the adaptive Wiener filter. The performance indices, such as peak signal to noise ratio (PSNR, have been computed for the quantitative analysis of the proposed filter. The experimental evaluation established the superiority of the proposed filtering technique over existing methods.

Field-scale sensitivity of vegetation discrimination to hyperspectral reflectance and coupled statistics

DEFF Research Database (Denmark)

Manevski, Kiril; Jabloun, Mohamed; Gupta, Manika

2016-01-01

a more powerful input to a nonparametric analysis for discrimination at the field scale, when compared with unaltered reflectance and parametric analysis. However, the discrimination outputs interact and are very sensitive to the number of observations - an important implication for the design......Remote sensing of land covers utilizes an increasing number of methods for spectral reflectance processing and its accompanying statistics to discriminate between the covers’ spectral signatures at various scales. To this end, the present chapter deals with the field-scale sensitivity...... of the vegetation spectral discrimination to the most common types of reflectance (unaltered and continuum-removed) and statistical tests (parametric and nonparametric analysis of variance). It is divided into two distinct parts. The first part summarizes the current knowledge in relation to vegetation...

Did abortion legalization reduce the number of unwanted children? Evidence from adoptions.

Science.gov (United States)

Bitler, Marianne; Madeline, Zavodny

2002-01-01

The legalization of abortion in the United States led to well-known changes in reproductive behavior, but its effect on adoptions has not been investigated. Variation across states in the timing and extent of abortion legalization is used to identify the effects of changes in the legal status of abortion on adoption rates from 1961 to 1975. These effects are estimated in regression analyses that control for states' economic, demographic and political characteristics, as well as for health care availability within states. The rate of adoptions of children born to white women declined by 34-37% in states that repealed restrictive abortion laws before Roe v. Wade. The effect was concentrated among adoptions by petitioners not related to the child. Legal reforms resulting in small increases in access, such as in cases of rape and incest, were associated with a 15-18% decline in adoptions of children born to nonwhite women; however, this decline may have been due to other changes in the policy environment for such adoptions. Rates of adoption of children born to white women appear to have declined after Roe v. Wade, but this association is not statistically significant. The estimated effect of abortion legalization on adoption rates is sizable and can account for much of the decline in adoptions, particularly of children born to white women, during the early 1970s. These findings support previous studies' conclusions that abortion legalization led to a reduction in the number of "unwanted" children; such a reduction may have improved average infant health and children's living conditions.

Comparative evaluation of nitrate removal technologies

International Nuclear Information System (INIS)

Darbi, A.; Viraraghavan, T.; Butler, R.; Corkal, D.

2002-01-01

Due to the extensive application of artificial nitrogen-based fertilizers and animal manure on land, many water agencies face problems of increasing concentrations of nitrate in groundwater. The contamination of groundwater by nitrate may pose a significant public health problem. The threat of methemoglobinemia is well documented and reflected in the U.S. drinking water standard of 10 mg/L as nitrate-nitrogen. Approximately 45% of Saskatchewan's population use groundwater for drinking purposes, out of which, approximately 23% (230,000) are rural residents. The water used is made available from over 48,000 privately owned wells in regions where there is an extensive application of chemical fertilizers. Biological denitrification, ion exchange and reveres osmosis (RO) processes were selected for further study. Field studies were conducted on these processes. The sulfur/limestone autotrophic denitrification (SLAD) process was selected to achieve biological removal of nitrate from groundwater. The feasibility of the system was evaluated under anaerobic conditions. An ion exchange study was conducted using Ionac A554 which is strong anion exchange resins. In the case of groundwater containing low sulfate concentrations, A554 offered high nitrate removal. However, the disposal of regenerant brine can be a problem. A reverse osmosis unit with Filmtec membrane elements (FT30-Element Family) was used in the study on nitrate removal. The unit effluent average nitrate concentration was less than the maximum allowable concentration. (author)

Patients’ experiences of changes in health complaints before, during, and after removal of dental amalgam

Directory of Open Access Journals (Sweden)

Therese T. Sjursen

2015-06-01

Full Text Available In this article, we explore how patients with health complaints attributed to dental amalgam experienced and gave meaning to changes in health complaints before, during, and after removal of all amalgam fillings. We conducted semistructured qualitative interviews with 12 participants from the treatment group in a Norwegian amalgam removal trial. Interviews took place within a couple months of the final follow-up 5 years after amalgam removal. Using the NVivo9 software, we conducted an explorative and reflective thematic analysis and identified the following themes: Something is not working: betrayed by the body, You are out there on your own, Not being sure of the importance of amalgam removal, The relief experienced after amalgam removal, and To accept, to give up, or to continue the search. We discuss the findings in the context of patients’ assigning meaning to illness experiences.

Neutron Beam Filters

International Nuclear Information System (INIS)

Adib, M.

2011-01-01

The purpose of filters is to transmit neutrons with selected energy, while remove unwanted ones from the incident neutron beam. This reduces the background, and the number of spurious. The types of commonly used now-a-day neutron filters and their properties are discussed in the present work. There are three major types of neutron filters. The first type is filter of selective thermal neutron. It transmits the main reflected neutrons from a crystal monochromate, while reject the higher order contaminations accompanying the main one. Beams coming from the moderator always contain unwanted radiation like fast neutrons and gamma-rays which contribute to experimental background and to the biological hazard potential. Such filter type is called filter of whole thermal neutron spectrum. The third filter type is it transmits neutrons with energies in the resonance energy range (En . 1 KeV). The main idea of such neutron filter technique is the use of large quantities of a certain material which have the deep interference minima in its total neutron cross-section. By transmitting reactor neutrons through bulk layer of such material, one can obtain the quasimonochromatic neutron lines instead of white reactor spectrum.

Stochastic Gabor reflectivity and acoustic impedance inversion

Science.gov (United States)

Hariri Naghadeh, Diako; Morley, Christopher Keith; Ferguson, Angus John

2018-02-01

To delineate subsurface lithology to estimate petrophysical properties of a reservoir, it is possible to use acoustic impedance (AI) which is the result of seismic inversion. To change amplitude to AI, removal of wavelet effects from the seismic signal in order to get a reflection series, and subsequently transforming those reflections to AI, is vital. To carry out seismic inversion correctly it is important to not assume that the seismic signal is stationary. However, all stationary deconvolution methods are designed following that assumption. To increase temporal resolution and interpretation ability, amplitude compensation and phase correction are inevitable. Those are pitfalls of stationary reflectivity inversion. Although stationary reflectivity inversion methods are trying to estimate reflectivity series, because of incorrect assumptions their estimations will not be correct, but may be useful. Trying to convert those reflection series to AI, also merging with the low frequency initial model, can help us. The aim of this study was to apply non-stationary deconvolution to eliminate time variant wavelet effects from the signal and to convert the estimated reflection series to the absolute AI by getting bias from well logs. To carry out this aim, stochastic Gabor inversion in the time domain was used. The Gabor transform derived the signal’s time-frequency analysis and estimated wavelet properties from different windows. Dealing with different time windows gave an ability to create a time-variant kernel matrix, which was used to remove matrix effects from seismic data. The result was a reflection series that does not follow the stationary assumption. The subsequent step was to convert those reflections to AI using well information. Synthetic and real data sets were used to show the ability of the introduced method. The results highlight that the time cost to get seismic inversion is negligible related to general Gabor inversion in the frequency domain. Also

Common cuckoo females are not choosy when removing an egg during parasitism

Czech Academy of Sciences Publication Activity Database

Šulc, Michal; Procházka, Petr; Čapek, Miroslav; Honza, Marcel

2016-01-01

Roč. 27, č. 6 (2016), s. 1642-1649 ISSN 1045-2249 R&D Projects: GA ČR(CZ) GAP506/12/2404 Institutional support: RVO:68081766 Keywords : brood parasitism * coevolution * egg removal * great reed warbler * host and parasite * mimicry * reflectance * spotting pattern Subject RIV: EG - Zoology Impact factor: 3.311, year: 2016

Factors associated with unwanted sexual experiences of young Australian females: an observational study.

Science.gov (United States)

Subasinghe, Asvini K; Jayasinghe, Yasmin L; Wark, John D; Gorelik, Alexandra; Garland, Suzanne M

2017-08-01

Background Behavioural and lifestyle factors associated with childhood unwanted sexual experiences (USE) have yet to be investigated in Australian females aged less than 18 years. Women aged 16-25 years living in Victoria were recruited via targeted advertising on Facebook. A web-based validated questionnaire was used to collect information on participant demographics, mental health, USE and sexual behaviours. Multivariable logistic regression was used to determine associations between a history of childhood (<16 years) and adolescent (16-18 years) USE and indices of sexual orientation. Data were collected from 639 females (mean±s.d. age 22±3 years). Approximately 14% reported childhood USE and 15% reported adolescent USE. Approximately 37% of survivors of childhood USE reported penile-genital contact in relation to their USE. Participants who reported depression were almost four times as likely to have experienced childhood USE than those who did not report suffering from depression (odds ratio 3.6, 95% confidence interval 2.1-6.0, P<0.001). Positive associations between childhood USE, same-sex relationships and smoking were also detected. A strong relationship between childhood USE, depression and same-sex sexual behaviours was found, but results did not determine the direction of this association. Longitudinal studies should be conducted to investigate whether there are groups of individuals who are at a high risk of experiencing childhood USE, so that appropriate support systems can be put in place.

Lower reflectivity and higher minority carrier lifetime of hand-tailored porous silicon

International Nuclear Information System (INIS)

Zhang Nansheng; Ma Zhongquan; Zhou Chengyue; He Bo

2009-01-01

Solar cell grade crystalline silicon with very low reflectivity has been obtained by electrochemically selective erosion. The porous silicon (PS) structure with a mixture of nano- and micro-crystals shows good antireflection properties on the surface layer, which has potential for application in commercial silicon photovoltaic devices after optimization. The morphology and reflectivity of the PS layers are easily modulated by controlling the electrochemical formation conditions (i.e., the current density and the anodization time). It has been shown that much a lower reflectivity of approximately 1.42% in the range 380-1100 nm is realized by using optimized conditions. In addition, the minority carrier lifetime of the PS after removing the phosphorus silicon layer is measured to be ∼3.19 μs. These values are very close to the reflectivity and the minority carrier lifetime of Si 3 N 4 as a passivation layer on a bulk silicon-based solar cell (0.33% and 3.03 μs, respectively).

Lingual nerve injury following surgical removal of mandibular third molar

Directory of Open Access Journals (Sweden)

Abduljaleel Azad Samad

2017-12-01

Full Text Available Background and objective: The close proximity of lingual nerve in relation to the lingual cortical bone of the posterior mandibular third molar is clinically important because lingual nerve may be subjected to trauma during surgical removal of the impacted lower third molar. This prospective study aimed to evaluate the incidence of lingual nerve paresthesia following surgical removal of mandibular third molar in College of Dentistry, Hawler Medical University. Methods: A total of 116 third molars surgery were carried out under local anesthesia for 116 patients for removal of lower mandibular teeth Using Terence Ward's incision made in all cases, and after that, the buccal flap was reflected, lingual tissues had been retracted during bone removal with a periosteal elevator. The sensory disturbance was evaluated on the 7th postoperative day by standard questioning the patients: “Do you have any unusual feeling in your tongue, lingual gingiva and mucosa of the floor of the mouth?" Results: One patient experienced sensory disturbance, the lingual nerve paresthesia incidence was 0.9% as a transient sensory disturbance, while no patient of permanent sensory disturbance. Conclusion: The incidence of injury to the lingual nerve can be minimized by careful clinical evaluation, surgeon’s experience, surgical approach and knowledge about anatomical landmarks during surgical removal of an impacted lower third molar tooth.

The Reflective Learning Continuum: Reflecting on Reflection

Science.gov (United States)

Peltier, James W.; Hay, Amanda; Drago, William

2005-01-01

The importance of reflection to marketing educators is increasingly recognized. However, there is a lack of empirical research that considers reflection within the context of both the marketing and general business education literature. This article describes the use of an instrument that can be used to measure four identified levels of a…

The position of the Bureau of International Recycling on unwanted radioactivity and scrap

International Nuclear Information System (INIS)

Neenan, P.; Bartley, R.

1999-01-01

The Bureau of International Recycling (BIR) speaks as the unified voice of the international recycling industry on a world level, promoting free-trade in non-hazardous recyclables and the increased usage of recycled goods. In October 1998, BIR presented its 'Guide to Radioactivity' to its members in order to explain the basics of radioactivity, to help determine what actions material recyclers should take and to provide an initial contact guide for summoning expert help. The Guide was promulgated together with a survey questionnaire; initial results of this survey have been collated. BIR members do not trade in radioactive materials and do not wish to receive hazardous radioactive contaminated materials. Furthermore it is very uncommon to find this unwelcome and unwanted material. The burden of handling contaminated materials should not rest on the recycling industry alone, however, as the hazards associated with processing contaminated materials are potentially extreme, recyclers have a role to help safeguard both their workforce and subsequent customers. Some BIR members have invested in in-plant detection equipment of various types from a variety of suppliers to detect contamination from 'lost' sources or from naturally occurring radioactive materials (NORM). Strict State control on sources in use would be very welcome to limit these ' losses'. Not all BIR members are in a position to provide or operate detection equipment; therefore, BIR would welcome States providing detection and control at sea ports and at border checkpoints on railways and roads. Some states have proposed permitting requirements for the handling of radioactive contaminated materials and have tried, inappropriately, to impose on the mainstream recycling industry, permits designed for the specialist decontamination or decommissioning industry. Current discussions on applying the transport of dangerous goods regulations would lead to unnecessary and impracticable additional restraints to

Quality assessment of terahertz time-domain spectroscopy transmission and reflection modes for graphene conductivity mapping

DEFF Research Database (Denmark)

Mackenzie, David M.A.; Whelan, Patrick Rebsdorf; Bøggild, Peter

2018-01-01

We present a comparative study of electrical measurements of graphene using terahertz time-domain spectroscopy in transmission and reflection mode, and compare the measured sheet conductivity values to electrical van der Pauw measurements made independently in three different laboratories. Overall......, while offering the additional advantages associated with contactless mapping, such as high throughput, no lithography requirement, and with the spatial mapping directly revealing the presence of any inhomogeneities or isolating defects. The confirmation of the accuracy of reflection-mode removes...

Cloud-shadow removal for Unmanned Aerial System multispectral imagery based on tensor decomposition methods

DEFF Research Database (Denmark)

Baum, Andreas; Wang, Sheng; Garcia, Monica

2017-01-01

that are mosaicked into larger images to produce ortho-photomaps. Frequently, especially in northern latitudes, the images to be mosaicked have been acquired under varying irradiance conditions due to moving clouds that create artifacts in the detected signal unrelated to physical changes in vegetation properties......, this study succeeded to remove the cloud shadow effects and image noise in UAS imagery providing normalized reflectance. The comparison between the corrected and un-corrected images shows a significant improvement for reflectance estimation in the shadow areas. Further, analysis of vegetation indices e...

ARSENIC REMOVAL BY IRON REMOVAL PROCESSES

Science.gov (United States)

Presentation will discuss the removal of arsenic from drinking water using iron removal processes that include oxidation/filtration and the manganese greensand processes. Presentation includes results of U.S. EPA field studies conducted in Michigan and Ohio on existing iron remo...

Lake restoration by fish removal: Short and Long-term effects in 36 Danish lakes

DEFF Research Database (Denmark)

Søndergaard, Martin; Liboriussen, Lone; Pedersen, Asger Roer

2008-01-01

a (Chla), total phosphorus (TP), total nitrogen (TN), and suspended solids (SS) decreased to 50-70% of the level prior to removal. The most significant and long-lasting effects were found for SS and Secchi depth, whereas the most modest effects were seen for Chla. This probably reflects an efficient...

Unwanted effects: Is there a negative side of meditation? A multicentre survey.

Directory of Open Access Journals (Sweden)

Ausiàs Cebolla

Full Text Available Despite the long-term use and evidence-based efficacy of meditation and mindfulness-based interventions, there is still a lack of data about the possible unwanted effects (UEs of these practices. The aim of this study was to evaluate the occurrence of UEs among meditation practitioners, considering moderating factors such as the type, frequency, and lifetime duration of the meditation practices.An online survey was developed and disseminated through several websites, such as Spanish-, English- and Portuguese-language scientific research portals related to mindfulness and meditation. After excluding people who did not answer the survey correctly or completely and those who had less than two months of meditation experience, a total of 342 people participated in the study. However, only 87 reported information about UEs.The majority of the practitioners were women from Spain who were married and had a University education level. Practices were more frequently informal, performed on a daily basis, and followed by focused attention (FA. Among the participants, 25.4% reported UEs, showing that severity varies considerably. The information requested indicated that most of the UEs were transitory and did not lead to discontinuing meditation practice or the need for medical assistance. They were more frequently reported in relation to individual practice, during focused attention meditation, and when practising for more than 20 minutes and alone. The practice of body awareness was associated with UEs to a lesser extent, whereas focused attention was associated more with UEs.This is the first large-scale, multi-cultural study on the UEs of meditation. Despite its limitations, this study suggests that UEs are prevalent and transitory and should be further studied. We recommend the use of standardized questionnaires to assess the UEs of meditation practices.

Unwanted effects: Is there a negative side of meditation? A multicentre survey.

Science.gov (United States)

Cebolla, Ausiàs; Demarzo, Marcelo; Martins, Patricia; Soler, Joaquim; Garcia-Campayo, Javier

2017-01-01

Despite the long-term use and evidence-based efficacy of meditation and mindfulness-based interventions, there is still a lack of data about the possible unwanted effects (UEs) of these practices. The aim of this study was to evaluate the occurrence of UEs among meditation practitioners, considering moderating factors such as the type, frequency, and lifetime duration of the meditation practices. An online survey was developed and disseminated through several websites, such as Spanish-, English- and Portuguese-language scientific research portals related to mindfulness and meditation. After excluding people who did not answer the survey correctly or completely and those who had less than two months of meditation experience, a total of 342 people participated in the study. However, only 87 reported information about UEs. The majority of the practitioners were women from Spain who were married and had a University education level. Practices were more frequently informal, performed on a daily basis, and followed by focused attention (FA). Among the participants, 25.4% reported UEs, showing that severity varies considerably. The information requested indicated that most of the UEs were transitory and did not lead to discontinuing meditation practice or the need for medical assistance. They were more frequently reported in relation to individual practice, during focused attention meditation, and when practising for more than 20 minutes and alone. The practice of body awareness was associated with UEs to a lesser extent, whereas focused attention was associated more with UEs. This is the first large-scale, multi-cultural study on the UEs of meditation. Despite its limitations, this study suggests that UEs are prevalent and transitory and should be further studied. We recommend the use of standardized questionnaires to assess the UEs of meditation practices.

Challenging Narcissus, or Reflecting on Reflecting.

Science.gov (United States)

Achilles, C. M.

The concept of reflective practice and teaching people to be reflective practitioners is examined. The document begins with a look at professional knowledge according to three prominent professionals in the educational administration field: Schon, Schein, and Achilles. "Reflective" strategies that could be incorporated into courses and…

The removal of heavy metals by iron mine drainage sludge and Phragmites australis

Science.gov (United States)

Hoang Ha, Nguyen Thi; Anh, Bui Thi Kim

2017-06-01

This study was conducted to assess the removal of heavy metals from solutions by the combination of modified iron mine drainage sludge (sorbent column) and surface and subsurface flow constructed wetlands using the common reed (Phragmites australis) during 30 days of experiment. The results of this study demonstrated that the average removal rates of Zn, Pb, Mn, and As by sorbent column were 59.0, 55.1, 38.7, and 42.4%, respectively. The decreasing trend of removal rates of metals by sorbent column was obtained during the experiment. The average removal rates of Zn, Pb, Mn, and As by sorbent column-surface constructed wetland were 78.9, 73.5, 91.2, and 80.5%, respectively; those by sorbent column-subsurface flow constructed wetland were 81.7, 81.1, 94.1, and 83.1% which reflected that subsurface flow constructed wetland showed higher removal rate than the surface system. Concentrations of heavy metals in the outlet water were lower than the Vietnamese standard limits regulated for industrial wastewater. The results indicate the feasibility of integration of iron mine drainage sludge and constructed wetlands for wastewater treatment.

River Restoration by Dam Removal: Assessing Riverine Re-Connectivity Across New England

Science.gov (United States)

Magilligan, F. J.; Nislow, K. H.; Graber, B.; Sneddon, C.; Fox, C.; Martin, E.

2014-12-01

The impacts of dams in New England are especially acute as it possesses one of the highest densities of dams in the US, with the NID documenting more than 4,000 dams, and state agency records indicating that >14,000 dams are peppered throughout the landscape. This large number of dams contributes to pervasive watershed fragmentation, threatening the ecological integrity of rivers and streams, and in the case of old, poorly maintained structures, posing a risk to lives and property. These concerns have generated active dam removal efforts throughout New England. To best capture the geomorphic, hydrologic, and potential ecological effects of dam removal at a regional level, we have compiled a dataset of 127 removed dams in New England, which includes information about structural characteristics, georectified locations, and key watershed attributes (including basin size, distance to next upstream obstacle, and number of free-flowing river kms opened up). Our specific research questions address (1) what is the spatial distribution of removed dams and how does this pattern relate to stated management goals of restoring critical habitat for native resident freshwater and diadromous fish, (2) what are the structural or management commonalities in dam types that have been removed, and (3) what has been the incremental addition of free-flowing river length? Rather than reflecting an overall management prioritization strategy, results indicate that dam removals are characterized more by opportunistic removals. For example, despite a regional emphasis on diadromous fish protection and restoration, most removals are inland rather than coastal settings. Most of the removed dams were small (~ 45% 2,300 river kms over the past several decades, with implication for both resident and diadromous fish, and with many removals located in mid-sized rivers that are a key link between upstream and downstream/coastal aquatic ecosystems.

Hair Removal

Science.gov (United States)

... Staying Safe Videos for Educators Search English Español Hair Removal KidsHealth / For Teens / Hair Removal What's in ... you need any of them? Different Types of Hair Before removing hair, it helps to know about ...

Retrieval and Validation of aerosol optical properties from AHI measurements: impact of surface reflectance assumption

Science.gov (United States)

Lim, H.; Choi, M.; Kim, J.; Go, S.; Chan, P.; Kasai, Y.

2017-12-01

This study attempts to retrieve the aerosol optical properties (AOPs) based on the spectral matching method, with using three visible and one near infrared channels (470, 510, 640, 860nm). This method requires the preparation of look-up table (LUT) approach based on the radiative transfer modeling. Cloud detection is one of the most important processes for guaranteed quality of AOPs. Since the AHI has several infrared channels, which are very advantageous for cloud detection, clouds can be removed by using brightness temperature difference (BTD) and spatial variability test. The Yonsei Aerosol Retrieval (YAER) algorithm is basically utilized on a dark surface, therefore a bright surface (e.g., desert, snow) should be removed first. Then we consider the characteristics of the reflectance of land and ocean surface using three visible channels. The known surface reflectivity problem in high latitude area can be solved in this algorithm by selecting appropriate channels through improving tests. On the other hand, we retrieved the AOPs by obtaining the visible surface reflectance using NIR to normalized difference vegetation index short wave infrared (NDVIswir) relationship. ESR tends to underestimate urban and cropland area, we improved the visible surface reflectance considering urban effect. In this version, ocean surface reflectance is using the new cox and munk method which considers ocean bidirectional reflectance distribution function (BRDF). Input of this method has wind speed, chlorophyll, salinity and so on. Based on validation results with the sun-photometer measurement in AErosol Robotic NETwork (AERONET), we confirm that the quality of Aerosol Optical Depth (AOD) from the YAER algorithm is comparable to the product from the Japan Aerospace Exploration Agency (JAXA) retrieval algorithm. Our future update includes a consideration of improvement land surface reflectance by hybrid approach, and non-spherical aerosols. This will improve the quality of YAER

Slow neutron total cross-section, transmission and reflection calculation for poly- and mono-NaCl and PbF{sub 2} crystals

Energy Technology Data Exchange (ETDEWEB)

Mansy, Muhammad S., E-mail: mmansy88@asrt.sci.eg [Reactor Physics Department, Nuclear Research Centre, Atomic Energy Authority, Cairo (Egypt); Radioactive Waste Management Unit, Hot Labs Centre, Atomic Energy Authority, Cairo (Egypt); Adib, M.; Habib, N. [Reactor Physics Department, Nuclear Research Centre, Atomic Energy Authority, Cairo (Egypt); Bashter, I.I. [Physics Department, Faculty of Science, Zagazig University (Egypt); Morcos, H.N.; El-Mesiry, M.S. [Reactor Physics Department, Nuclear Research Centre, Atomic Energy Authority, Cairo (Egypt)

2016-10-01

Highlights: • Slow neutron cross-section calculation for poly- and mono-crystalline materials. • Monochromatic features of PbF{sub 2} and NaCl mono-crystals. • Characterization of poly- and mono-crystal filters used in neutron diffraction. • Computer code developed calculates neutron cross-section, transmission & reflection. - Abstract: A detailed study about the calculation of total neutron cross-section, transmission and reflection from crystalline materials was performed. The developed computer code is approved to be sufficient for the required calculations, also an excellent agreement has been shown when comparing the code results with the other calculated and measured values. The optimal monochromator and filter parameters were discussed in terms of crystal orientation, mosaic spread, and thickness. Calculations show that 30 cm thick of PbF{sub 2} poly-crystal is an excellent cold neutron filter producing neutron wavelengths longer than 0.66 nm needed for the investigation of magnetic structure experiments. While mono-crystal filter PbF{sub 2} cut along its (1 1 1), having mosaic spread (η = 0.5°) and thickness 10 cm can only transmit thermal neutrons of the desired wavelengths and suppress epithermal and γ-rays forming unwanted background, when it is cooled to liquid nitrogen temperature. NaCl (2 0 0) and PbF{sub 2} (1 1 1) monochromator crystals having mosaic spread (η = 0.5°) and thickness 10 mm shows high neutron reflectivity for neutron wavelengths (λ = 0.114 nm and λ = 0.43 nm) when they used as a thermal and cold neutron monochromators respectively with very low contamination from higher order reflections.

Reduction of short wavelength reflectance of multi-wall carbon nanotubes through ultraviolet laser irradiation

Science.gov (United States)

Stephens, Michelle S.; Simonds, Brian J.; Yung, Christopher S.; Conklin, Davis; Livigni, David J.; Oliva, Alberto Remesal; Lehman, John H.

2018-05-01

Multi-wall carbon nanotube coatings are used as broadband, low-reflectance absorbers for bolometric applications and for stray light control. They are also used as high emittance blackbody radiators. Irradiation of single wall carbon nanotubes with ultraviolet (UV) laser light has been shown to remove amorphous carbon debris, but there have been few investigations of the interaction of UV light with the more complex physics of multi-wall carbon nanotubes. We present measurements of reflectance and surface morphology before and after exposure of multi-wall carbon nanotube coatings to 248 nm UV laser light. We show that UV exposure reduces the reflectivity at wavelengths below 600 nm and present modeling of the thermal cycling the UV exposure causes at the surface of the carbon nanotubes. This effect can be used to flatten the spectral shape of the reflectivity curve of carbon nanotube absorber coatings used for broadband applications. Finally, we find that the effect of UV exposure depends on the nanotube growth process.

Seismic reflection imaging, accounting for primary and multiple reflections

Science.gov (United States)

Wapenaar, Kees; van der Neut, Joost; Thorbecke, Jan; Broggini, Filippo; Slob, Evert; Snieder, Roel

2015-04-01

Imaging of seismic reflection data is usually based on the assumption that the seismic response consists of primary reflections only. Multiple reflections, i.e. waves that have reflected more than once, are treated as primaries and are imaged at wrong positions. There are two classes of multiple reflections, which we will call surface-related multiples and internal multiples. Surface-related multiples are those multiples that contain at least one reflection at the earth's surface, whereas internal multiples consist of waves that have reflected only at subsurface interfaces. Surface-related multiples are the strongest, but also relatively easy to deal with because the reflecting boundary (the earth's surface) is known. Internal multiples constitute a much more difficult problem for seismic imaging, because the positions and properties of the reflecting interfaces are not known. We are developing reflection imaging methodology which deals with internal multiples. Starting with the Marchenko equation for 1D inverse scattering problems, we derived 3D Marchenko-type equations, which relate reflection data at the surface to Green's functions between virtual sources anywhere in the subsurface and receivers at the surface. Based on these equations, we derived an iterative scheme by which these Green's functions can be retrieved from the reflection data at the surface. This iterative scheme requires an estimate of the direct wave of the Green's functions in a background medium. Note that this is precisely the same information that is also required by standard reflection imaging schemes. However, unlike in standard imaging, our iterative Marchenko scheme retrieves the multiple reflections of the Green's functions from the reflection data at the surface. For this, no knowledge of the positions and properties of the reflecting interfaces is required. Once the full Green's functions are retrieved, reflection imaging can be carried out by which the primaries and multiples are

Removable partial dentures: The clinical need for innovation.

Science.gov (United States)

Campbell, Stephen D; Cooper, Lyndon; Craddock, Helen; Hyde, T Paul; Nattress, Brian; Pavitt, Sue H; Seymour, David W

2017-09-01

The number of partially dentate adults is increasing, and many patients will require replacement of missing teeth. Although current treatment options also include fixed partial dentures and implants, removable partial dentures (RPDs) can have advantages and are widely used in clinical practice. However, a significant need exists to advance materials and fabrication technologies because of the unwanted health consequences associated with current RPDs. The purpose of this review was to assess the current state of and future need for prosthetics such as RPDs for patients with partial edentulism, highlight areas of weakness, and outline possible solutions to issues that affect patient satisfaction and the use of RPDs. The data on treatment for partial edentulism were reviewed and summarized with a focus on currently available and future RPD designs, materials, means of production, and impact on oral health. Data on patient satisfaction and compliance with RPD treatment were also reviewed to assess patient-centered care. Design, materials, ease of repair, patient education, and follow-up for RPD treatment all had a significant impact on treatment success. Almost 40% of patients no longer use their RPD within 5 years because of factors such as sociodemographics, pain, and esthetics. Research on RPD-based treatment for partial edentulism for both disease-oriented and patient-centered outcomes is lacking. Future trials should evaluate new RPD materials and design technologies and include both long-term follow-up and health-related and patient-reported outcomes. Advances in materials and digital design/production along with patient education promise to further the application of RPDs and improve the quality of life for patients requiring RPDs. Copyright © 2017 The Authors. Published by Elsevier Inc. All rights reserved.

Selective colors reflection from stratified aragonite calcium carbonate plates of mollusk shells.

Science.gov (United States)

Lertvachirapaiboon, Chutiparn; Parnklang, Tewarak; Pienpinijtham, Prompong; Wongravee, Kanet; Thammacharoen, Chuchaat; Ekgasit, Sanong

2015-08-01

An interaction between the incident light and the structural architecture within the shell of Asian green mussel (Perna viridis) induces observable pearlescent colors. In this paper, we investigate the influence of the structural architecture on the expressed colors. After a removal of the organic binder, small flakes from crushed shells show vivid rainbow reflection under an optical microscope. An individual flake expresses vivid color under a bright-field illumination while become transparent under a dark-field illumination. The expressed colors of the aragonite flakes are directly associated with its structural architecture. The flakes with aragonite thickness of 256, 310, and 353 nm, respectively, appear blue, green, and red under an optical microscope. The spectral simulation corroborates the experimentally observed optical effects as the flakes with thicker aragonite layers selectively reflected color with longer wavelengths. Flakes with multiple aragonite thicknesses expressed multi-color as the upper aragonite layers allow reflected colors from the lower layers to be observed. Copyright © 2015 Elsevier Inc. All rights reserved.

Response of green reflectance continuum removal index to the xanthophyll de-epoxidation cycle in Norway spruce needles

Czech Academy of Sciences Publication Activity Database

Kováč, Daniel; Malenovský, Z.; Urban, O.; Špunda, Vladimír; Kalina, J.; Ač, Alexander; Kaplan, Věroslav; Hanuš, Jan

2013-01-01

Roč. 64, č. 7 (2013), s. 1-11 ISSN 0022-0957 R&D Projects: GA MŠk LD12042; GA MŠk(CZ) ED1.1.00/02.0073; GA MŠk(CZ) LM2010007 Institutional support: RVO:67179843 Keywords : chlorophyll to carotenoid ratio * continuum removal * excessive irradiance * excessive irradiance * spectral index * xanthophyll cycle pigments Subject RIV: EH - Ecology, Behaviour Impact factor: 5.794, year: 2013

Reflection and Non-Reflection of Particle Wavepackets

Science.gov (United States)

Cox, Timothy; Lekner, John

2008-01-01

Exact closed-form solutions of the time-dependent Schrodinger equation are obtained, describing the propagation of wavepackets in the neighbourhood of a potential. Examples given include zero reflection, total reflection and partial reflection of the wavepacket, for the sech[superscript 2]x/a, 1/x[superscript 2] and delta(x) potentials,…

Perioperative hair removal: A review of best practice and a practice improvement opportunity.

Science.gov (United States)

Spencer, Maureen; Barnden, Marsha; Johnson, Helen Boehm; Fauerbach, Loretta Litz; Graham, Denise; Edmiston, Charles E

2018-06-01

The current practice of perioperative hair removal reflects research-driven changes designed to minimize the risk of surgical wound infection. An aspect of the practice which has received less scrutiny is the clean-up of the clipped hair. This process is critical. The loose fibers represent a potential infection risk because of the micro-organisms they can carry, but their clean-up can pose a logistical problem because of the time required to remove them. Research has demonstrated that the most commonly employed means of clean-up, the use of adhesive tape or sticky mitts, can be both ineffective and time-consuming in addition to posing an infection risk from cross-contamination. Recently published research evaluating surgical clippers fitted with a vacuum-assisted hair collection device highlights the potential for significant practice improvement in the perioperative hair removal clean-up process. These improvements include not only further mitigation of potential infection risk but also substantial OR time and cost savings.

Effect of reflective practice education on self-reflection, insight, and reflective thinking among experienced nurses: a pilot study.

Science.gov (United States)

Asselin, Marilyn E; Fain, James A

2013-01-01

A mixed-method study was conducted to determine whether nurses' participation in a reflective practice continuing education program using a structured reflection model makes a difference in nurses' self-reflection, insight, and reflective thinking about clinical practice situations. Findings suggested that use of structured reflection using question cues, written narratives, and peer-facilitated reflection increased nurses' engagement in self-reflection and enhanced reflective thinking in practice. Including reflective practice education in novice orientation and preceptor training may be beneficial.

Remifentanil for the insertion and removal of long-term central venous access during monitored anesthesia care.

LENUS (Irish Health Repository)

Burlacu, Crina L

2012-02-01

STUDY OBJECTIVE: To determine the analgesic efficacy of three different rates of remifentanil infusion in patients undergoing insertion or removal of long-term central venous access devices during monitored anesthesia care and local anesthetic field infiltration. DESIGN: Double-blinded, randomized, controlled study. SETTING: Operating theatre of an University hospital. PATIENTS: 44 unpremedicated, ASA physical status 1 and 2 patients, aged 18-65 years, undergoing insertion or removal of a Port-a-Cath or Hickman catheter. INTERVENTIONS: Patients sedated with a propofol target-controlled infusion were randomly allocated to three groups: Group R25 (n = 14), Group R50 (n = 15), and Group R75 (n = 15), to receive remifentanil 0.025, 0.05, and 0.075 mug\\/kg\\/min, respectively. Rescue remifentanil 0.5 mug\\/kg was administered for pain scores > 3. The remifentanil infusion rate was maintained constant unless respiratory and\\/or cardiovascular unwanted events occurred, whereupon the rate was adjusted in 0.01 mug\\/kg\\/min decrements as necessary. MEASUREMENTS: Pain scores (primary outcome), sedation, and movement scores (secondary outcomes) were assessed during local anesthetic infiltration of the anterior chest wall and 5 other procedural steps. MAIN RESULTS: All infusion rates had equal analgesic efficacy, as shown by comparable pain scores, number of rescue boluses, and number of patients requiring rescue analgesia. Excessive sedation was associated with the highest remifentanil rate such that Group R75 patients were significantly more sedated than Groups R25 or R50 at selective procedural steps (P < 0.05). More Group R75 patients (6\\/15) required remifentanil rate reduction than did patients from Group R50 (1\\/15) or Group R25 (0\\/14), P < 0.01, most commonly because of respiratory depression. CONCLUSIONS: For the insertion or removal of long-term central venous access devices, all three remifentanil infusion rates proved to be equally analgesic

Diffuse Reflectance Spectroscopy of Hidden Objects, Part I: Interpretation of the Reflection-Absorption-Scattering Fractions in Near-Infrared (NIR) Spectra of Polyethylene Films.

Science.gov (United States)

Pomerantsev, Alexey L; Rodionova, Oxana Ye; Skvortsov, Alexej N

2017-08-01

Investigation of a sample covered by an interfering layer is required in many fields, e.g., for process control, biochemical analysis, and many other applications. This study is based on the analysis of spectra collected by near-infrared (NIR) diffuse reflectance spectroscopy. Each spectrum is a composition of a useful, target spectrum and a spectrum of an interfering layer. To recover the target spectrum, we suggest using a new phenomenological approach, which employs the multivariate curve resolution (MCR) method. In general terms, the problem is very complex. We start with a specific problem of analyzing a system, which consists of several layers of polyethylene (PE) film and underlayer samples with known spectral properties. To separate information originating from PE layers and the target, we modify the system versus both the number of the PE layers as well as the reflectance properties of the target sample. We consider that the interfering spectrum of the layer can be modeled using three components, which can be tentatively called transmission, absorption, and scattering contributions. The novelty of our approach is that we do not remove the reflectance and scattering effects from the spectra, but study them in detail aiming to use this information to recover the target spectrum.

Disproportionate Declines in Ground-Foraging Insectivorous Birds after Mistletoe Removal.

Directory of Open Access Journals (Sweden)

David M Watson

Full Text Available Insectivorous birds have been recognized as disproportionately sensitive to land-use intensification and habitat loss, with those species feeding primarily on the ground exhibiting some of the most dramatic declines. Altered litter inputs and availability of epigeic arthropods have been suggested to underlie reduced abundances and shrinking distributions but direct evidence is lacking. I used a patch-scale removal experiment in southern Australia to evaluate whether ground-feeding insectivores are especially vulnerable to altered litter-fall. Building on work demonstrating the importance of mistletoe litter to nutrient dynamics, litter was reduced by removing mistletoe (Loranthaceae from one set of eucalypt woodlands, responses of birds three years after mistletoe removal compared with otherwise similar control woodlands containing mistletoe. Despite not feeding on mistletoes directly, insectivores exhibited the greatest response to mistletoe removal. Among woodland residents, ground-foraging insectivores showed the most dramatic response; treatment woodlands losing an average of 37.4% of their pre-treatment species richness. Once these 19 species of ground-foraging insectivores were excluded, remaining woodland species showed no significant effect of mistletoe removal. This response reflects greater initial losses in treatment woodlands during the study (which coincided with a severe drought and double the number of species returning to control woodlands (where mistletoe numbers and litter were not manipulated post-drought. These findings support the productivity-based explanation of declining insectivores, suggesting diminished litter-fall reduced habitat quality for these birds via decreased availability of their preferred prey. In addition to altered prey availability, interactions between litter-fall and epigeic arthropods exemplify the importance of below-ground / above-ground linkages driving ecosystem function.

Removing Hair Safely

Science.gov (United States)

... For Consumers Home For Consumers Consumer Updates Removing Hair Safely Share Tweet Linkedin Pin it More sharing ... related to common methods of hair removal. Laser Hair Removal In this method, a laser destroys hair ...

Being a reflective teacher——reflection on group management

Institute of Scientific and Technical Information of China (English)

Pan; Lehui

2015-01-01

<正>Introduction According to Pollard and Triggs(1997),reflective teaching is a process through which the capacity to make such professional judgments can be developed and maintained.Then what is a reflective teacher?Reflective teacher is someone who reflects systematically on her practice in a constant attempt to improve

Multiple heavy metal removal using an entomopathogenic fungi Beauveria bassiana.

Science.gov (United States)

Gola, Deepak; Dey, Priyadarshini; Bhattacharya, Arghya; Mishra, Abhishek; Malik, Anushree; Namburath, Maneesh; Ahammad, Shaikh Ziauddin

2016-10-01

Towards the development of a potential remediation technology for multiple heavy metals [Zn(II), Cu(II), Cd(II), Cr(VI) and Ni(II)] from contaminated water, present study examined the growth kinetics and heavy metal removal ability of Beauveria bassiana in individual and multi metals. The specific growth rate of B. bassiana varied from 0.025h(-1) to 0.039h(-1) in presence of individual/multi heavy metals. FTIR analysis indicated the involvement of different surface functional groups in biosorption of different metals, while cellular changes in fungus was reflected by various microscopic (SEM, AFM and TEM) analysis. TEM studies proved removal of heavy metals via sorption and accumulation processes, whereas AFM studies revealed increase in cell surface roughness in fungal cells exposed to heavy metals. Present study delivers first report on the mechanism of bioremediation of heavy metals when present individually as well as multi metal mixture by entomopathogenic fungi. Copyright © 2016 Elsevier Ltd. All rights reserved.

Effect of removal of hesperis matronalis (Dame's rocket) on species cover of forest understory vegetation in NW indiana

Science.gov (United States)

Pavlovic, N.B.; Leicht-Young, S. A.; Frohnapple, K.J.; Grundel, R.

2009-01-01

Exotic invasive plant species differ in their effects on indigenous vegetation as evidenced by research evaluating community response to their removal. We used a removal approach to quantify the response of a mesic woodland to the removal versus retention of an invasive plant, Hesperis matronalis (dame's rocket) from paired treatment plots over 3 y. Cover of H. matronalis did not differ between control and treatment plots prior to removal, declined in the removal plots and remained significantly lower in cover compared to the control plots. Removal did not significantly affect species richness and species diversity (evenness, Shannon and Simpson) at the plot scale, but did result in increased species richness overall in the removal plots in the last sampling year when compared to control plots. Non-metric multidimensional scaling ordination analysis indicated a significant compositional change in the spring plant composition of plots over the 3 y, reflecting an increase in exotic woody species. Exotic woody plants, especially Rosa multiflora and Euonymus alatus, increased in cover in response to H. matronalis removal. In the 3 y, neither native nor exotic forbs, nor native woody plants responded to the removal of H. matronalis in a statistically significant manner. The increasing cover of woody invasive plants in response to the removal of H. matronalis has important management implications for restoration of degraded communities.

Reduction of unwanted submental fat with ATX-101 (deoxycholic acid), an adipocytolytic injectable treatment: results from a phase III, randomized, placebo-controlled study.

Science.gov (United States)

Rzany, B; Griffiths, T; Walker, P; Lippert, S; McDiarmid, J; Havlickova, B

2014-02-01

Unwanted submental fat (SMF) is aesthetically unappealing, but methods of reduction are either invasive or lack evidence for their use. An injectable approach with ATX-101 (deoxycholic acid) is under investigation. To evaluate the efficacy and safety of ATX-101 for the reduction of unwanted SMF. In this double-blind, placebo-controlled, phase III study, 363 patients with moderate/severe SMF were randomized to receive ATX-101 (1 or 2 mg cm(-2) ) or placebo injections into their SMF at up to four treatment sessions ~28 days apart, with a 12-week follow-up. The co-primary efficacy endpoints were the proportions of treatment responders [patients with ≥ 1-point improvement in SMF on the 5-point Clinician-Reported Submental Fat Rating Scale (CR-SMFRS)] and patients satisfied with their face and chin appearance on the Subject Self-Rating Scale (SSRS). Secondary endpoints included skin laxity, calliper measurements and patient-reported outcomes. Adverse events were monitored. Significantly more ATX-101 recipients met the primary endpoint criteria vs. placebo: on the clinician scale, 59·2% and 65·3% of patients treated with ATX-101 1 and 2 mg cm(-2) , respectively, were treatment responders vs. 23·0% for placebo (CR-SMFRS; P < 0·001); on the patient scale, 53·3% and 66·1%, respectively, vs. 28·7%, were satisfied with their face/chin appearance (SSRS; P < 0·001). Calliper measurements showed a significant reduction in SMF (P < 0·001), skin laxity was not worsened and patients reported improvements in the severity and psychological impact of SMF with ATX-101 vs. placebo. Most adverse events were transient and associated with the treatment area. ATX-101 was effective and well tolerated for nonsurgical SMF reduction. © 2013 The Authors. British Journal of Dermatology published by John Wiley & Sons Ltd on behalf of British Association of Dermatologists.

Ecosystem response to removal of exotic riparian shrubs and a transition to upland vegetation

Science.gov (United States)

Reynolds, Lindsay V.; Cooper, David J.

2011-01-01

Understanding plant community change over time is essential for managing important ecosystems such as riparian areas. This study analyzed historic vegetation using soil seed banks and the effects of riparian shrub removal treatments and channel incision on ecosystem and plant community dynamics in Canyon de Chelly National Monument, Arizona. We focused on how seeds, nutrients, and ground water influence the floristic composition of post-treatment vegetation and addressed three questions: (1) How does pre-treatment soil seed bank composition reflect post-treatment vegetation composition? (2) How does shrub removal affect post-treatment riparian vegetation composition, seed rain inputs, and ground water dynamics? and (3) Is available soil nitrogen increased near dead Russian olive plants following removal and does this influence post-treatment vegetation? We analyzed seed bank composition across the study area, analyzed differences in vegetation, ground water levels, and seed rain between control, cut-stump and whole-plant removal areas, and compared soil nitrogen and vegetation near removed Russian olive to areas lacking Russian olive. The soil seed bank contained more riparian plants, more native and fewer exotic plants than the extant vegetation. Both shrub removal methods decreased exotic plant cover, decreased tamarisk and Russian olive seed inputs, and increased native plant cover after 2 years. Neither method increased ground water levels. Soil near dead Russian olive trees indicated a short-term increase in soil nitrogen following plant removal but did not influence vegetation composition compared to areas without Russian olive. Following tamarisk and Russian olive removal, our study sites were colonized by upland plant species. Many western North American rivers have tamarisk and Russian olive on floodplains abandoned by channel incision, river regulation or both. Our results are widely applicable to sites where drying has occurred and vegetation

Reflective photovoltaics

Energy Technology Data Exchange (ETDEWEB)

Lentine, Anthony L.; Nielson, Gregory N.; Cruz-Campa, Jose Luis; Okandan, Murat; Goeke, Ronald S.

2018-03-06

A photovoltaic module includes colorized reflective photovoltaic cells that act as pixels. The colorized reflective photovoltaic cells are arranged so that reflections from the photovoltaic cells or pixels visually combine into an image on the photovoltaic module. The colorized photovoltaic cell or pixel is composed of a set of 100 to 256 base color sub-pixel reflective segments or sub-pixels. The color of each pixel is determined by the combination of base color sub-pixels forming the pixel. As a result, each pixel can have a wide variety of colors using a set of base colors, which are created, from sub-pixel reflective segments having standard film thicknesses.

Propellantless Attitude Control of Solar Sail Technology Utilizing Reflective Control Devices

Science.gov (United States)

Munday, Jeremy

2016-01-01

Solar sails offer an opportunity for a CubeSatscale, propellant-free spacecraft technology that enables long-term and long-distance missions not possible with traditional methods. Solar sails operate using the transfer of linear momentum from photons of sunlight reflected from the surface of the sail. To propel the spacecraft, no mechanically moving parts, thrusters, or propellant are needed. However, attitude control, or orientation, is still performed using traditional methods involving reaction wheels and propellant ejection, which severely limit mission lifetime. For example, the current state of the art solutions employed by upcoming missions couple solar sails with a state of the art propellant ejection gas system. Here, the use of the gas thruster has limited the lifetime of the mission. To solve the limited mission lifetime problem, the Propellantless Attitude Control of Solar Sail Technology Utilizing Reflective Control Devices project team is working on propellantless attitude control using thin layers of material, an optical film, electrically switchable from transparent to reflective. The technology is based on a polymer-dispersed liquid crystal (PDLC), which allows this switch upon application of a voltage. This technology removes the need for propellant, which reduces weight and cost while improving performance and lifetime.

Bright Retinal Lesions Detection using Colour Fundus Images Containing Reflective Features

Energy Technology Data Exchange (ETDEWEB)

Giancardo, Luca [ORNL; Karnowski, Thomas Paul [ORNL; Chaum, Edward [ORNL; Meriaudeau, Fabrice [ORNL; Tobin Jr, Kenneth William [ORNL; Li, Yaquin [University of Tennessee, Knoxville (UTK)

2009-01-01

In the last years the research community has developed many techniques to detect and diagnose diabetic retinopathy with retinal fundus images. This is a necessary step for the implementation of a large scale screening effort in rural areas where ophthalmologists are not available. In the United States of America, the incidence of diabetes is worryingly increasing among the young population. Retina fundus images of patients younger than 20 years old present a high amount of reflection due to the Nerve Fibre Layer (NFL), the younger the patient the more these reflections are visible. To our knowledge we are not aware of algorithms able to explicitly deal with this type of reflection artefact. This paper presents a technique to detect bright lesions also in patients with a high degree of reflective NFL. First, the candidate bright lesions are detected using image equalization and relatively simple histogram analysis. Then, a classifier is trained using texture descriptor (Multi-scale Local Binary Patterns) and other features in order to remove the false positives in the lesion detection. Finally, the area of the lesions is used to diagnose diabetic retinopathy. Our database consists of 33 images from a telemedicine network currently developed. When determining moderate to high diabetic retinopathy using the bright lesions detected the algorithm achieves a sensitivity of 100% at a specificity of 100% using hold-one-out testing.

Remote sensing reflectance and inherent optical properties of oceanic waters derived from above-water measurements

Science.gov (United States)

Lee, Zhongping; Carder, Kendall L.; Steward, Robert G.; Peacock, Thomas G.; Davis, Curtiss O.; Mueller, James L.

1997-02-01

Remote-sensing reflectance and inherent optical properties of oceanic properties of oceanic waters are important parameters for ocean optics. Due to surface reflectance, Rrs or water-leaving radiance is difficult to measure from above the surface. It usually is derived by correcting for the reflected skylight in the measured above-water upwelling radiance using a theoretical Fresnel reflectance value. As it is difficult to determine the reflected skylight, there are errors in the Q and E derived Rrs, and the errors may get bigger for high chl_a coastal waters. For better correction of the reflected skylight,w e propose the following derivation procedure: partition the skylight into Rayleigh and aerosol contributions, remove the Rayleigh contribution using the Fresnel reflectance, and correct the aerosol contribution using an optimization algorithm. During the process, Rrs and in-water inherent optical properties are derived at the same time. For measurements of 45 sites made in the Gulf of Mexico and Arabian Sea with chl_a concentrations ranging from 0.07 to 49 mg/m3, the derived Rrs and inherent optical property values were compared with those from in-water measurements. These results indicate that for the waters studied, the proposed algorithm performs quite well in deriving Rrs and in- water inherent optical properties from above-surface measurements for clear and turbid waters.

Bragg reflection transmission filters for variable resolution monochromators

International Nuclear Information System (INIS)

Chapman, D.

1989-01-01

There are various methods for improving the angular and spectral resolution of monochromator and analyzer systems. The novel system described here, though limited to higher x-ray energies (>20keV), is based on a dynamical effect occurring on the transmitted beam with a thin perfect crystal plate set in the Bragg reflection case. In the case of Bragg reflection from a perfect crystal, the incident beam is rapidly attenuated as it penetrates the crystal in the range of reflection. This extinction length is of the order of microns. The attenuation length, which determines the amount of normal transmission through the plate is generally much longer. Thus, in the range of the Bragg reflection the attenuation of the transmitted beam can change by several orders of magnitude with a small change in energy or angle. This thin crystal plate cuts a notch in the transmitted beam with a width equal to its Darwin width, thus acting as a transmission filter. When used in a non-dispersive mode with other monochromator crystals, the filter when set at the Bragg angle will reflect the entire Darwin width of the incident beam and transmit the wings of the incident beam distribution. When the element is offset in angle by some fraction of the Darwin width, the filter becomes useful in adjusting the angular width of the transmitted beam and removing a wing. Used in pairs with a symmetric offset, the filters can be used to continuously adjust the intrinsic angular divergence of the beam with good wing reduction. Instances where such filters may be useful are in improving the angular resolution of a small angle scattering camera. These filters may be added to a Bonse-Hart camera with one pair on the incident beam to reduce the intrinsic beam divergence and a second pair on the analyzer arm to improve the analyzer resolution. 2 refs., 3 Figs

Diffuse Reflectance Infrared Fourier Transform Study of NOx Adsorption on CGO10 Impregnated with K2O or BaO

DEFF Research Database (Denmark)

Traulsen, Marie Lund; Härelind Ingelsten, H.; Kammer Hansen, Kent

2012-01-01

In the present work Diffuse Reflectance Infrared Fourier Transform (DRIFT) spectroscopy is applied to study the adsorption of NOx at 300-500 °C in different atmospheres on gadolinium doped ceria (CGO), an important material in electrodes investigated for electrochemical NOx removal. Furthermore...

Tattoo removal with the alexandrite laser: a clinical and histologic study

Science.gov (United States)

Fitzpatrick, Richard E.; Goldman, Mitchel P.

1993-07-01

The incident of tattoos in the United States is estimated to be in the range of 9 to 11% of the adult population. Various studies have shown that of these persons having tattoos, as many as 50 to 80% regret having gotten the tattoo and may desire tattoo removal. Previous treatment modalities have all used methods which require tissue destruction in order to remove the tattoo ink. The primary problems with use of these modalities has been the unpredictability of scarring. Also, residual tattoo pigment remaining after completion of the treatment process has been a problem. In response to these problems, the Q-switched lasers have been developed which target the tattoo pigments specifically rather than the tissue containing the tattoo pigment. The alexandrite laser (made by Candela Laser Corporation) has a wavelength of 755 nm and a pulse width of 100 nsec plus or minus 10 nsec. Reflectance studies have indicated that black, blue and green ink should absorb this wavelength relatively well, while red ink would not be expected to absorb this wavelength well. The mechanism of action of this laser is selective absorption of the laser energy by the tattoo pigment resulting in fragmentation of the pigment and then engulfment by tissue macrophages which remove the fragmented tattoo pigment. Preliminary studies using a Yucatan mini pig confirmed these expectations with black ink being easier to remove than blue and green, and red ink being minimally responsive. Higher fluences were more effective.

PLANNING YOUR REMOVALS

CERN Multimedia

Service déménagement; ST Division

1999-01-01

To give you better service and avoid lengthy delays, the Removals Service advises you to refrain from programming moves between 26 July and 3 September, as large-scale removals are already planned during this summer period.Thanking you in advance for your co-operation and understanding.Removals Service STTel. 74185 / Mobile 164017

PROGRAMMING OFFICE REMOVALS

CERN Multimedia

Groupe ST-HM

2000-01-01

The Removals Service recommends you to plan your removals well in advance, taking into account the fact that the Transport and Handling Group’s main priority remains the dismantling of LEP and the installation of the LHC. The requests can be made by: http://st.web.cern.ch/st/hm/removal/DEMEE.HTM Thank you for your cooperation.

Pulse stuttering as a remedy for aliased ground backscatter

Science.gov (United States)

Bowhill, S. A.

1983-12-01

An algorithm that aides in the removal of ground scatter from low frequency Mesosphere, Stratosphere, Troposphere (MST) radar signals is examined. The unwanted ground scatter is shown as a sequence of velocity plots which are almost typical at the various altitudes. The interpulse period is changed in a cyclic way, thereby destroying the coherence of the unwanted signal. The interpulse period must be changed by an amount at least equal to the transmitted pulse width, and optimum performance is obtained when the number of different interpulse period occupies a time span greater than the coherence time of the unwanted signal. Since a 20-msec pulse width is used, it was found convenient to cycle through 50 pulses, the interpulse period changing from 2 msec to 3 msec during the 1/8-second time. This particular pattern of interpulse periods was provided by a software radar controller. With application of this algorithm, the unwanted scatter signal becomes incoherent from one pulse to the next, and therefore is perceived as noise by the coherent integrator and correlator.

The normalization of surface anisotropy effects present in SEVIRI reflectances by using the MODIS BRDF method

DEFF Research Database (Denmark)

Proud, Simon Richard; Zhang, Qingling; Schaaf, Crystal

2014-01-01

A modified version of the MODerate resolution Imaging Spectroradiometer (MODIS) bidirectional reflectance distribution function (BRDF) algorithm is presented for use in the angular normalization of surface reflectance data gathered by the Spinning Enhanced Visible and InfraRed Imager (SEVIRI...... acquisition period than the comparable MODIS products while, at the same time, removing many of the angular perturbations present within the original MSG data. The NBAR data are validated against reflectance data from the MODIS instrument and in situ data gathered at a field location in Africa throughout 2008....... It is found that the MSG retrievals are stable and are of high-quality across much of the SEVIRI disk while maintaining a higher temporal resolution than the MODIS BRDF products. However, a number of circumstances are discovered whereby the BRDF model is unable to function correctly with the SEVIRI...

Price competition among Dutch sickness funds

NARCIS (Netherlands)

M. Varkevisser (Marco); S.A. van der Geest (Stéphanie)

2003-01-01

textabstractIn general, competition enhances efficiency. On the market for health insurance free market competition, however, has unwanted side-effects. The existence of asymmetrical information can lead to adverse selection and cream skimming. Adequate risk-adjustment removes the incentives for

Horizontal Heat Exchanger Design and Analysis for Passive Heat Removal Systems

Energy Technology Data Exchange (ETDEWEB)

Vierow, Karen

2005-08-29

This report describes a three-year project to investigate the major factors of horizontal heat exchanger performance in passive containment heat removal from a light water reactor following a design basis accident LOCA (Loss of Coolant Accident). The heat exchanger studied in this work may be used in advanced and innovative reactors, in which passive heat removal systems are adopted to improve safety and reliability The application of horizontal tube-bundle condensers to passive containment heat removal is new. In order to show the feasibility of horizontal heat exchangers for passive containment cooling, the following aspects were investigated: 1. the condensation heat transfer characteristics when the incoming fluid contains noncondensable gases 2. the effectiveness of condensate draining in the horizontal orientation 3. the conditions that may lead to unstable condenser operation or highly degraded performance 4. multi-tube behavior with the associated secondary-side effects This project consisted of two experimental investigations and analytical model development for incorporation into industry safety codes such as TRAC and RELAP. A physical understanding of the flow and heat transfer phenomena was obtained and reflected in the analysis models. Two gradute students (one funded by the program) and seven undergraduate students obtained research experience as a part of this program.

Seismic Shear Energy Reflection By Radon-Fourier Transform

Directory of Open Access Journals (Sweden)

Malik Umairia

2016-01-01

Full Text Available Seismic waves split in an anisotropic medium, instead of rotating horizontal component to principal direction, Radon-Fourier is derived to observe the signature of shear wave reflection. Synthetic model with fracture is built and discretized using finite difference scheme for spatial and time domain. Common depth point (CDP with single shot gives traces and automatic gain is preprocessed before Radon Transform (RT, a filtering technique gives radon domain. It makes easier to observe fractures at specific incidence and improves its quality in some way by removing the noise. A comparison of synthetic data and BF-data is performed on the basis of root means square error (RMS values. The RMS error is minimum at the 10th trace in radon domain.

ARSENIC REMOVAL FROM DRINKING WATER BY IRON REMOVAL PLANTS

Science.gov (United States)

This report documents a long term performance study of two iron removal water treatment plants to remove arsenic from drinking water sources. Performance information was collected from one system located in midwest for one full year and at the second system located in the farwest...

Quantifying Reflection

DEFF Research Database (Denmark)

Alcock, Gordon Lindsay

2013-01-01

´ These are all based on Blooms taxonomy and levels of competence and form a major part of individual student and group learning portfolios. Key Words :Project-Based learning, Reflective Portfolios, Self assessment, Defining learning gains, Developing learning strategies , Reflections on and for learning....... It contrasts the students’ self-assessment in a range of ‘product’ skills such as Revit, Structural Design, Mathematics of construction, Technical Installations; as well as ‘process’ competencies such as ‘Working in a team’, Sharing knowledge, Maintaining a portfolio and Reflecting ON learning and FOR learning......This paper documents 1st semester student reflections on “learning to learn” in a team-based PBL environment with quantitative and qualitative student reflective feedback on the learning gains of 60 Architectural Technology and Construction Management students at VIA University College, Denmark...

The Home as aural Haven

Directory of Open Access Journals (Sweden)

Rowland Atkinson

2008-12-01

Full Text Available The home is not only a place of physical refuge from the elements and unwanted intruders. It is also a refuge from unwanted sound, a place where we can enjoy calm spaces that permit quiet reflection. Our homes, as discrete and personally modifiable micro-soundscapes, offer a kind of environmental nourishment to us as social beings. Noise in the home – from neighbours, roads, airports, air conditioners, parties – unsettles our sense of control, autonomy and authorship over what is our primary territorial domain.

Temperature-reflection I

DEFF Research Database (Denmark)

McGady, David A.

2017-01-01

-temperature path integrals for quantum field theories (QFTs) should be T-reflection invariant. Because multi-particle partition functions are equal to Euclidean path integrals for QFTs, we expect them to be T-reflection invariant. Single-particle partition functions though are often not invariant under T......In this paper, we revisit the claim that many partition functions are invariant under reflecting temperatures to negative values (T-reflection). The goal of this paper is to demarcate which partition functions should be invariant under T-reflection, and why. Our main claim is that finite...... that T-reflection is unrelated to time-reversal. Finally, we study the interplay between T-reflection and perturbation theory in the anharmonic harmonic oscillator in quantum mechanics and in Yang-Mills in four-dimensions. This is the first in a series of papers on temperature-reflections....

Knowledge and attitude of young people regarding HIV prevention and unwanted pregnancy in Bobo-Dioulasso, Burkina Faso

Science.gov (United States)

Come Yélian Adohinzin, Clétus; Meda, Nicolas; Anicet Ouédraogo, Georges; Gaston Belem, Adrien Marie; Sombié, Issiaka; Berthé, Abdramane; Bakwin Kandala, Ngianga; Damienne Avimadjenon, Georgette; Fond-Harmant, Laurence

2016-10-19

Introduction: Despite health education efforts, young people are still faced with major health problems. The objective of this study was to assess the knowledge and attitude regarding HIV prevention and unwanted pregnancy among young people in Bobo-Dioulasso, Burkina Faso. Methods: Based on two-level sampling, representing 94,947 households in the Bobo-Dioulasso municipality, 573 young people between the ages of 15 and 24 years were interviewed. This data collection was conducted from September 2014 to January 2015 in the three districts of the municipality. A questionnaire was used to assess the knowledge and attitudes of young people. Results: The interviewees had a poor knowledge about HIV transmission and prevention and contraception Very few young people (9%) had complete knowledge about the modes of transmission and 5% had no knowledge. Persistent misperceptions about the effectiveness of condoms (25%) and contraception (32%) did not prevent some young people from using them (79% used condoms and 46% used contraceptives). Knowledge and attitudes of young people regarding HIV and contraception varied according to age, sex, education level and type of parental supervision. Conclusion: A significant proportion of young people still has incomplete knowledge about HIV/AIDS and contraception. Actions designed to reinforce the knowledge of young people are of paramount importance. The capacities of parents and healthcare providers also need to be reinforced to improve the quality of relationship with young people.

Dam removal: Listening in

Science.gov (United States)

Foley, M. M.; Bellmore, J. R.; O'Connor, J. E.; Duda, J. J.; East, A. E.; Grant, G. E.; Anderson, C. W.; Bountry, J. A.; Collins, M. J.; Connolly, P. J.; Craig, L. S.; Evans, J. E.; Greene, S. L.; Magilligan, F. J.; Magirl, C. S.; Major, J. J.; Pess, G. R.; Randle, T. J.; Shafroth, P. B.; Torgersen, C. E.; Tullos, D.; Wilcox, A. C.

2017-07-01

Dam removal is widely used as an approach for river restoration in the United States. The increase in dam removals—particularly large dams—and associated dam-removal studies over the last few decades motivated a working group at the USGS John Wesley Powell Center for Analysis and Synthesis to review and synthesize available studies of dam removals and their findings. Based on dam removals thus far, some general conclusions have emerged: (1) physical responses are typically fast, with the rate of sediment erosion largely dependent on sediment characteristics and dam-removal strategy; (2) ecological responses to dam removal differ among the affected upstream, downstream, and reservoir reaches; (3) dam removal tends to quickly reestablish connectivity, restoring the movement of material and organisms between upstream and downstream river reaches; (4) geographic context, river history, and land use significantly influence river restoration trajectories and recovery potential because they control broader physical and ecological processes and conditions; and (5) quantitative modeling capability is improving, particularly for physical and broad-scale ecological effects, and gives managers information needed to understand and predict long-term effects of dam removal on riverine ecosystems. Although these studies collectively enhance our understanding of how riverine ecosystems respond to dam removal, knowledge gaps remain because most studies have been short (< 5 years) and do not adequately represent the diversity of dam types, watershed conditions, and dam-removal methods in the U.S.

First on-line applications of multi-reflection time-of-flight mass separator at ISOLTRAP and the mass measurement of $^{82}$Zn

CERN Document Server

Wolf, Robert

This thesis describes the implementation and first on-line application of a multi-reflection time-of-flight (MR-ToF) mass analyzer for high-resolution mass separation at the ISOLTRAP mass spectrometer at ISOLDE/CERN. On the one hand, the major objective was to improve ISOLTRAPs mass-measurement capabilities with respect to the ratio of delivered contaminating ions to ions of interest. On the other hand, the time necessary to purify wanted from unwanted species should be reduced as much as possible to enable access to even more exotic nuclei. The device has been set up, optimized and tested at the University of Greifswald before its move to ISOLTRAP. The achieved performance comprises mass resolving powers of up to 200000 reached at observation times of 30ms and a contamination suppression of about four orders of magnitude by use of a Bradbury-Nielsen gate. With the characteristics, it outperforms clearly the so far state-of-the-art purification method of a gas-filled Penning trap. To improve the utilization o...

Theory of reflection reflection and transmission of electromagnetic, particle and acoustic waves

CERN Document Server

Lekner, John

2016-01-01

This book deals with the reflection of electromagnetic and particle waves by interfaces. The interfaces can be sharp or diffuse. The topics of the book contain absorption, inverse problems, anisotropy, pulses and finite beams, rough surfaces, matrix methods, numerical methods,  reflection of particle waves and neutron reflection. Exact general results are presented, followed by long wave reflection, variational theory, reflection amplitude equations of the Riccati type, and reflection of short waves. The Second Edition of the Theory of Reflection is an updated and much enlarged revision of the 1987 monograph. There are new chapters on periodically stratified media, ellipsometry, chiral media, neutron reflection and reflection of acoustic waves. The chapter on anisotropy is much extended, with a complete treatment of the reflection and transmission properties of arbitrarily oriented uniaxial crystals. The book gives a systematic and unified treatment reflection and transmission of electromagnetic and particle...

Cultivating Reflective Practitioners in Technology Preparation: Constructing TPACK through Reflection

Directory of Open Access Journals (Sweden)

Liangyue Lu

2013-12-01

Full Text Available Teaching is a complex profession, which is further complicated by the integration of technology into classrooms. Reflection can help teachers unpack the complexity in their practice. Reflection can be an effective instructional strategy in helping preservice teachers develop technological pedagogical content knowledge (TPACK, the complex and dynamic knowledge necessary for effective technology integration into instruction. In this study, reflective activities were integrated into a Learning By Design (LBD environment, which was created to help preservice teachers develop TPACK. This paper investigated the participants’ TPACK development and examined how reflection helped them construct TPACK. Through content analysis of the participants’ reflective journals, the researcher found that the preservice teachers developed initial TPACK awareness. However, their reflection in technology knowledge and the content aspects of TPACK were limited and superficial. Interviews with the participants showed reflection helped the preservice teachers remember what they learned by describing and elaborating on their in-class experiences, pushed them to think about how to apply what they learned in their future classrooms, and helped them become more reflective and open-minded about using technology in classrooms. Finally, the researcher discussed this study’s implications for teacher educators and researchers.

Plate removal following orthognathic surgery.

Science.gov (United States)

Little, Mhairi; Langford, Richard Julian; Bhanji, Adam; Farr, David

2015-11-01

The objectives of this study are to determine the removal rates of orthognathic plates used during orthognathic surgery at James Cook University Hospital and describe the reasons for plate removal. 202 consecutive orthognathic cases were identified between July 2004 and July 2012. Demographics and procedure details were collected for these patients. Patients from this group who returned to theatre for plate removal between July 2004 and November 2012 were identified and their notes were analysed for data including reason for plate removal, age, smoking status, sex and time to plate removal. 3.2% of plates were removed with proportionally more plates removed from the mandible than the maxilla. 10.4% of patients required removal of one or more plate. Most plates were removed within the first post-operative year. The commonest reasons for plate removal were plate exposure and infection. The plate removal rates in our study are comparable to those seen in the literature. Copyright © 2015 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.

Cadmium analysis using field deployable nano-band electrode system and its removal using electrocoagulation

Science.gov (United States)

Guttula, Mallikarjuna Murthy

Cadmium (Cd) is an extremely toxic metal commonly found in industrial workplaces. Major industrial releases of Cd stem from waste streams, leaching of landfills, and from a variety of operations that involve cadmium or zinc. Particularly, cadmium can be released to drinking water from the corrosion of some galvanized plumbing and water main pipe materials. The United State Environmental Protection Agency (USEPA) has set the Maximum Contaminant Level (MCL) for cadmium at 5 ppb. Long term exposure of cadmium above the MCL results in kidney, liver, bone and blood damage. An accurate and rapid measurement of cadmium in the field remains a technical challenge. In this work, a relatively new method of a Nano-Band Electrode system using anodic stripping voltammetry was optimized by changing deposition potential, electrolyte, and plating time. We efficiently used Electrocoagulation remove cadmium from wastewater and obtained a removal efficiency of +/-99%. Removal mechanism of cadmium in electrocoagulation was also proposed with the help of X-ray Diffraction (XRD), Attenuated Total Reflection - Fourier Transform Infra Red Spectroscopy (ATR-FTIR), and Scanning Electron Microscopy and Energy Dispersive Spectrometer (SEM-EDS).

A New Indicator for Optimal Preprocessing and Wavelengths Selection of Near-Infrared Spectra

NARCIS (Netherlands)

Skibsted, E.; Boelens, H.F.M.; Westerhuis, J.A.; Witte, D.T.; Smilde, A.K.

2004-01-01

Preprocessing of near-infrared spectra to remove unwanted, i.e., non-related spectral variation and selection of informative wavelengths is considered to be a crucial step prior to the construction of a quantitative calibration model. The standard methodology when comparing various preprocessing

New indicator for optimal preprocessing and wavelength selection of near-infrared spectra

NARCIS (Netherlands)

Skibsted, E. T. S.; Boelens, H. F. M.; Westerhuis, J. A.; Witte, D. T.; Smilde, A. K.

2004-01-01

Preprocessing of near-infrared spectra to remove unwanted, i.e., non-related spectral variation and selection of informative wavelengths is considered to be a crucial step prior to the construction of a quantitative calibration model. The standard methodology when comparing various preprocessing

Reflecting on reflection in interprofessional education: implications for theory and practice.

Science.gov (United States)

Clark, Phillip G

2009-05-01

Interprofessional education (IPE) involves learning, and learning requires reflection. Educators need to "reflect more on reflection" if they are to be effective teachers in ensuring the learning outcomes essential for teamwork and interprofessional practice (IPP), including incorporating both theory and practice into the development of educational interventions. First, this discussion surveys the IPE-relevant literature on reflection, and then defines and refines the multidimensional concept of reflection as it relates to IPE in developing and implementing teamwork learning programs and experiences. Second, specific methods to promote reflection are presented and explored, including self-assessments, journaling, and written papers. Actual samples from student journals and assignments provide examples of the impacts of using these methods on participant reflection and learning. Finally, implications for an expanded understanding and application of reflection for IPE will be discussed, and recommendations made for educational practice and research in this area.

Analysis of contaminants on electronic components by reflectance FTIR spectroscopy

International Nuclear Information System (INIS)

Griffith, G.W.

1982-09-01

The analysis of electronic component contaminants by infrared spectroscopy is often a difficult process. Most of the contaminants are very small, which necessitates the use of microsampling techniques. Beam condensers will provide the required sensitivity but most require that the sample be removed from the substrate before analysis. Since it can be difficult and time consuming, it is usually an undesirable approach. Micro ATR work can also be exasperating, due to the difficulty of positioning the sample at the correct place under the ATR plate in order to record a spectrum. This paper describes a modified reflection beam condensor which has been adapted to a Nicolet 7199 FTIR. The sample beam is directed onto the sample surface and reflected from the substrate back to the detector. A micropositioning XYZ stage and a close-focusing telescope are used to position the contaminant directly under the infrared beam. It is possible to analyze contaminants on 1 mm wide leads surrounded by an epoxy matrix using this device. Typical spectra of contaminants found on small circuit boards are included

Impacts of tree rows on grassland birds and potential nest predators: a removal experiment.

Science.gov (United States)

Ellison, Kevin S; Ribic, Christine A; Sample, David W; Fawcett, Megan J; Dadisman, John D

2013-01-01

Globally, grasslands and the wildlife that inhabit them are widely imperiled. Encroachment by shrubs and trees has widely impacted grasslands in the past 150 years. In North America, most grassland birds avoid nesting near woody vegetation. Because woody vegetation fragments grasslands and potential nest predator diversity and abundance is often greater along wooded edge and grassland transitions, we measured the impacts of removing rows of trees and shrubs that intersected grasslands on potential nest predators and the three most abundant grassland bird species (Henslow's sparrow [Ammodramus henslowii], Eastern meadowlark [Sturnella magna], and bobolink [Dolichonyx oryzivorus]) at sites in Wisconsin, U.S.A. We monitored 3 control and 3 treatment sites, for 1 yr prior to and 3 yr after tree row removal at the treatment sites. Grassland bird densities increased (2-4 times for bobolink and Henslow's sparrow) and nesting densities increased (all 3 species) in the removal areas compared to control areas. After removals, Henslow's sparrows nested within ≤50 m of the treatment area, where they did not occur when tree rows were present. Most dramatically, activity by woodland-associated predators nearly ceased (nine-fold decrease for raccoon [Procyon lotor]) at the removals and grassland predators increased (up to 27 times activity for thirteen-lined ground squirrel [Ictidomys tridecemlineatus]). Nest success did not increase, likely reflecting the increase in grassland predators. However, more nests were attempted by all 3 species (175 versus 116) and the number of successful nests for bobolinks and Henslow's sparrows increased. Because of gains in habitat, increased use by birds, greater production of young, and the effective removal of woodland-associated predators, tree row removal, where appropriate based on the predator community, can be a beneficial management action for conserving grassland birds and improving fragmented and degraded grassland ecosystems.

Impacts of tree rows on grassland birds and potential nest predators: a removal experiment.

Directory of Open Access Journals (Sweden)

Kevin S Ellison

Full Text Available Globally, grasslands and the wildlife that inhabit them are widely imperiled. Encroachment by shrubs and trees has widely impacted grasslands in the past 150 years. In North America, most grassland birds avoid nesting near woody vegetation. Because woody vegetation fragments grasslands and potential nest predator diversity and abundance is often greater along wooded edge and grassland transitions, we measured the impacts of removing rows of trees and shrubs that intersected grasslands on potential nest predators and the three most abundant grassland bird species (Henslow's sparrow [Ammodramus henslowii], Eastern meadowlark [Sturnella magna], and bobolink [Dolichonyx oryzivorus] at sites in Wisconsin, U.S.A. We monitored 3 control and 3 treatment sites, for 1 yr prior to and 3 yr after tree row removal at the treatment sites. Grassland bird densities increased (2-4 times for bobolink and Henslow's sparrow and nesting densities increased (all 3 species in the removal areas compared to control areas. After removals, Henslow's sparrows nested within ≤50 m of the treatment area, where they did not occur when tree rows were present. Most dramatically, activity by woodland-associated predators nearly ceased (nine-fold decrease for raccoon [Procyon lotor] at the removals and grassland predators increased (up to 27 times activity for thirteen-lined ground squirrel [Ictidomys tridecemlineatus]. Nest success did not increase, likely reflecting the increase in grassland predators. However, more nests were attempted by all 3 species (175 versus 116 and the number of successful nests for bobolinks and Henslow's sparrows increased. Because of gains in habitat, increased use by birds, greater production of young, and the effective removal of woodland-associated predators, tree row removal, where appropriate based on the predator community, can be a beneficial management action for conserving grassland birds and improving fragmented and degraded grassland

Occurrence of illicit drugs in water and wastewater and their removal during wastewater treatment.

Science.gov (United States)

Yadav, Meena K; Short, Michael D; Aryal, Rupak; Gerber, Cobus; van den Akker, Ben; Saint, Christopher P

2017-11-01

This review critically evaluates the types and concentrations of key illicit drugs (cocaine, amphetamines, cannabinoids, opioids and their metabolites) found in wastewater, surface water and drinking water sources worldwide and what is known on the effectiveness of wastewater treatment in removing such compounds. It is also important to amass information on the trends in specific drug use as well as the sources of such compounds that enter the environment and we review current international knowledge on this. There are regional differences in the types and quantities of illicit drug consumption and this is reflected in the quantities detected in water. Generally, the levels of illicit drugs in wastewater effluents are lower than in raw influent, indicating that the majority of compounds can be at least partially removed by conventional treatment processes such as activated sludge or trickling filters. However, the literature also indicates that it is too simplistic to assume non-detection equates to drug removal and/or mitigation of associated risks, as there is evidence that some compounds may avoid detection via inadequate sampling and/or analysis protocols, or through conversion to transformation products. Partitioning of drugs from the water to the solids fraction (sludge/biosolids) may also simply shift the potential risk burden to a different environmental compartment and the review found no information on drug stability and persistence in biosolids. Generally speaking, activated sludge-type processes appear to offer better removal efficacy across a range of substances, but the lack of detail in many studies makes it difficult to comment on the most effective process configurations and operations. There is also a paucity of information on the removal effectiveness of alternative treatment processes. Research is also required on natural removal processes in both water and sediments that may over time facilitate further removal of these compounds in receiving

Particle Shape Characterization of Lunar Regolith using Reflected Light Microscopy

Science.gov (United States)

McCarty, C. B.; Garcia, G. C.; Rickman, D.

2014-12-01

Automated identification of particles in lunar thin sections is necessary for practical measurement of particle shape, void characterization, and quantitative characterization of sediment fabric. This may be done using image analysis, but several aspects of the lunar regolith make such automations difficult. For example, many of the particles are shattered; others are aggregates of smaller particles. Sieve sizes of the particles span 5 orders of magnitude. The physical thickness of a thin section, at a nominal 30 microns, is large compared to the size of many of the particles. Image acquisition modes, such as SEM and reflected light, while superior to transmitted light, still have significant ambiguity as to the volume being sampled. It is also desirable to have a technique that is inexpensive, not resource intensive, and analytically robust. To this end, we have developed an image acquisition and processing protocol that identifies and delineates resolvable particles on the front surface of a lunar thin section using a petrographic microscope in reflected light. For a polished thin section, a grid is defined covering the entire thin section. The grid defines discrete images taken with 20% overlap, minimizing the number of particles that intersect image boundaries. In reflected light mode, two images are acquired at each grid location, with a closed aperture diaphragm. One image, A, is focused precisely on the front surface of the thin section. The second image, B, is made after the stage is brought toward the objective lens just slightly. A bright fringe line, analogous to a Becke line, appears inside all transparent particles at the front surface of the section in the second image. The added light in the bright line corresponds to a deficit around the particles. Particle identification is done using ImageJ and uses multiple steps. A hybrid 5x5 median filter is used to make images Af and Bf. This primarily removes very small particles just below the front surface

Unwanted Immunology

Directory of Open Access Journals (Sweden)

M.V. Supotnytskyi

2016-04-01

Full Text Available The paper considers the role of antigenic imprin­ting phenomena and antibody-dependent enhancement of infection in epidemic, infectious and postvaccinal processes. Based on published experimental data, it is shown that both phenomena are directly related to the laws of development and course of epide­mics, the pathogenesis of infectious diseases and safe use of vaccines. Their ignoring by researchers has led to failures in the design of vaccines against HIV/AIDS, dengue fever, influenza, malaria, hemorrhagic fever and encephalitis. These data show that, without taking into account the two phenomena, the further development of immunology and epidemiology in the direction of breakthrough discoveries in there areas of science are impossible.

Unwanted heat

International Nuclear Information System (INIS)

Benka, M.

2006-01-01

The number of small heating plants using biomass is growing. According to TREND's information, Hrinovska energeticka, is the only one that controls the whole supplier chain in cooperation with its parent company in Bratislava. Starting with the collection and processing of wood chips by burning, heat production and heat distribution to the end user. This gives the company better control over costs and consequently its own prices. Last year, the engineering company, Hrinovske storjarne, decided to focus only on its core business and sold its heating plant, Hrinovske tepelne hospodarstvo, to Intech Slovakia and changed the company name to Hrinovska energeticka. Local companies and inhabitants were concerned that the new owner would increase prices. But the company publicly declared and kept promises that the heat price for households would remain at 500 Slovak crowns/gigajoule (13.33 EUR/gigajoule ), one of the lowest prices in Slovakia. This year the prices increased slightly to 570 Slovak crowns (15.2 EUR). 'We needed - even at the cost of lower profit - to satisfy our customers so that we would not lose them. We used this time for transition to biomass. This will allow us to freeze our prices in the coming years,' explained the statutory representative of the company, Ivan Dudak. (authors)

Shoulder arthroscopy (image)

Science.gov (United States)

... is a type of surgery to examine or repair the tissues inside or around your shoulder joint. The procedure ... small incision. If the surgeon is going to repair the joint, small surgical instruments are also used, such as a shaver to remove unwanted tissue.

SIMULAÇÃO E PROJECTO DE PROCESSOS QUÍMICOS CONSIDERANDO ASPECTOS ECONÓMICOS E AMBIENTAIS (PORTUGESE)

Science.gov (United States)

In this article the hydrodealkylation (HDA) process is studied and two process alternatives are compared: removing and recycling biphenyl. Since the unwanted biphenyl is formed by a reversible reaction the alternative of recycling biphenyl with toluene to let it build up to an eq...

Removal of basic dye (methylene blue) from wastewaters utilizing beer brewery waste

International Nuclear Information System (INIS)

Tsai, W.-T.; Hsu, H.-C.; Su, T.-Y.; Lin, K.-Y.; Lin, C.-M.

2008-01-01

In the work, the beer brewery waste has been shown to be a low-cost adsorbent for the removal of basic dye from the aqueous solution as compared to its precursor (i.e., diatomite) based on its physical and chemical characterizations including surface area, pore volume, scanning electron microscopy (SEM), and non-mineral elemental analyses. The pore properties of this waste were significantly larger than those of its raw material, reflecting that the trapped organic matrices contained in the waste probably provided additional adsorption sites and/or adsorption area. The results of preliminary adsorption kinetics showed that the diatomite waste could be directly used as a potential adsorbent for removal of methylene blue on the basis of its adsorption-biosorption mechanisms. The adsorption parameters thus obtained from the pseudo-second-order model were in accordance with their pore properties. From the results of adsorption isotherm at 298 K and the applicability examinations in treating industrial wastewater containing basic dye, it was further found that the adsorption capacities of diatomite waste were superior to those of diatomite, which were also in good agreement with their corresponding physical properties. From the results mentioned above, it is feasible to utilize the food-processing waste for removing dye from the industrial dying wastewater

Removal of basic dye (methylene blue) from wastewaters utilizing beer brewery waste.

Science.gov (United States)

Tsai, Wen-Tien; Hsu, Hsin-Chieh; Su, Ting-Yi; Lin, Keng-Yu; Lin, Chien-Ming

2008-06-15

In the work, the beer brewery waste has been shown to be a low-cost adsorbent for the removal of basic dye from the aqueous solution as compared to its precursor (i.e., diatomite) based on its physical and chemical characterizations including surface area, pore volume, scanning electron microscopy (SEM), and non-mineral elemental analyses. The pore properties of this waste were significantly larger than those of its raw material, reflecting that the trapped organic matrices contained in the waste probably provided additional adsorption sites and/or adsorption area. The results of preliminary adsorption kinetics showed that the diatomite waste could be directly used as a potential adsorbent for removal of methylene blue on the basis of its adsorption-biosorption mechanisms. The adsorption parameters thus obtained from the pseudo-second-order model were in accordance with their pore properties. From the results of adsorption isotherm at 298 K and the applicability examinations in treating industrial wastewater containing basic dye, it was further found that the adsorption capacities of diatomite waste were superior to those of diatomite, which were also in good agreement with their corresponding physical properties. From the results mentioned above, it is feasible to utilize the food-processing waste for removing dye from the industrial dying wastewater.

Removal of basic dye (methylene blue) from wastewaters utilizing beer brewery waste

Energy Technology Data Exchange (ETDEWEB)

Tsai, W.-T. [Graduate Institute of Bioresources, National Pingtung University of Science and Technology, Pingtung 912, Taiwan (China)], E-mail: wttsai@mail.npust.edu.tw; Hsu, H.-C.; Su, T.-Y.; Lin, K.-Y.; Lin, C.-M. [Department of Environmental Engineering and Science, Chia Nan University of Pharmacy and Science, Tainan 717, Taiwan (China)

2008-06-15

In the work, the beer brewery waste has been shown to be a low-cost adsorbent for the removal of basic dye from the aqueous solution as compared to its precursor (i.e., diatomite) based on its physical and chemical characterizations including surface area, pore volume, scanning electron microscopy (SEM), and non-mineral elemental analyses. The pore properties of this waste were significantly larger than those of its raw material, reflecting that the trapped organic matrices contained in the waste probably provided additional adsorption sites and/or adsorption area. The results of preliminary adsorption kinetics showed that the diatomite waste could be directly used as a potential adsorbent for removal of methylene blue on the basis of its adsorption-biosorption mechanisms. The adsorption parameters thus obtained from the pseudo-second-order model were in accordance with their pore properties. From the results of adsorption isotherm at 298 K and the applicability examinations in treating industrial wastewater containing basic dye, it was further found that the adsorption capacities of diatomite waste were superior to those of diatomite, which were also in good agreement with their corresponding physical properties. From the results mentioned above, it is feasible to utilize the food-processing waste for removing dye from the industrial dying wastewater.

Peer group reflection helps clinical teachers to critically reflect on their teaching.

Science.gov (United States)

Boerboom, Tobias B B; Jaarsma, Debbie; Dolmans, Diana H J M; Scherpbier, Albert J J A; Mastenbroek, Nicole J J M; Van Beukelen, Peter

2011-01-01

Student evaluations can help clinical teachers to reflect on their teaching skills and find ways to improve their teaching. Studies have shown that the mere presentation of student evaluations is not a sufficient incentive for teachers to critically reflect on their teaching. We evaluated and compared the effectiveness of two feedback facilitation strategies that were identical except for a peer reflection meeting. In this study, 54 clinical teachers were randomly assigned to two feedback strategies. In one strategy, a peer reflection was added as an additional step. All teachers completed a questionnaire evaluating the strategy that they had experienced. We analysed the reflection reports and the evaluation questionnaire. Both strategies stimulated teachers to reflect on feedback and formulate alternative actions for their teaching practice. The teachers who had participated in the peer reflection meeting showed deeper critical reflection and more concrete plans to change their teaching. All feedback strategies were considered effective by the majority of the teachers. Strategies with student feedback and self-assessment stimulated reflection on teaching and helped clinical teachers to formulate plans for improvement. A peer reflection meeting seemed to enhance reflection quality. Further research should establish whether it can have lasting effects on teaching quality.

Neighborhood level health risk assessment of lead paint removal activities from elevated steel bridges

Energy Technology Data Exchange (ETDEWEB)

Conway, R.F.; Cohen, J.T.; Bowers, T.

1999-07-01

The New York City Department of Transportation (NYCDOT) has adopted strict containment and monitoring procedures during paint removal activities on its bridges because of the increasing awareness about lead poisoning in children in urban environments and the potential risk of lead-based paint releases during those activities. NYCDOT owns nearly 800 bridges scattered throughout New York City. Before undertaking paint removal activities as part of its ongoing preventive maintenance and rehabilitation program, NYCDOT recently conducted an analysis to determine the public health risk posed to children living near them. The analysis the first of its kind to assess the actual public health risk potential during both routine operations and upset conditions, or accidental releases evaluated the total and incremental blood lead levels from paint removal activities on more than 5,000 children from 6 months to 6 years old. Increases in baseline blood lead levels were estimated using several models, including EPA's Integrated Exposure Uptake Biokinetic (IEUBK) Model. This model estimates steady-state blood lead levels in children, reflecting exposure to lead in multiple media over an extended period of time. Increases in lead exposure from paint removal activities in the area surrounding the bridges was estimated using EPA's Industrial Source Complex (ISC3) model to calculate ambient air and deposition levels. Potential releases from the containment and ancillary equipment used in the paint removal process were modeled based on different release scenarios ranging from routine operations to complete failure of containment. To estimate the paint removal activities' contribution to long-term exterior dust lead levels (and its related interior component), a stochastic simulation model was developed for each block in the study area.

Spider Vein Removal

Science.gov (United States)

Spider veins: How are they removed? I have spider veins on my legs. What options are available ... M.D. Several options are available to remove spider veins — thin red lines or weblike networks of ...

Media for Reflection

DEFF Research Database (Denmark)

Knudsen, Morten

2016-01-01

This article develops the concept media for reflection in the interest of conceptualizing the interpretative frames that enable and limit reflection in management and leadership education. The concept ‘media for reflection’ allows us to conceptualize the social and cultural mediation of reflection...... without reducing reflection to an effect of the social structures and cultural norms in which it is embedded. Based on the developed theoretical framework, this article analyses how a renaissance ‘mirror for princes’ and contemporary research-based management education mediate reflection. The content...... of the mediations is analysed as well as the societal and organizational background. Furthermore, the means by which the two media enable and limit reflection in different ways is compared. Finally, the article discusses possible implications of the analysis in terms of management and leadership education....

Glacial removal of late Cenozoic subglacially emplaced volcanic edifices by the West Antarctic ice sheet

Science.gov (United States)

Behrendt, John C.; Blankenship, D.D.; Damaske, D.; Cooper, A. K.

1995-01-01

Local maxima of the horizontal gradient of pseudogravity from closely spaced aeromagnetic surveys over the Ross Sea, northwestern Ross Ice Shelf, and the West Antarctic ice sheet, reveal a linear magnetic rift fabric and numerous subcircular, high-amplitude anomalies. Geophysical data indicate two or three youthful volcanic edifices at widely separated areas beneath the sea and ice cover in the West Antarctic rift system. In contrast, we suggest glacial removal of edifices of volcanic sources of many more anomalies. Magnetic models, controlled by marine seismic reflection and radar ice-sounding data, allow us to infer that glacial removal of the associated late Cenozoic volcanic edifices (probably debris, comprising pillow breccias, and hyaloclastites) has occurred essentially concomitantly with their subglacial eruption. "Removal' of unconsolidated volcanic debris erupted beneath the ice is probably a more appropriate term than "erosion', given its fragmented, ice-contact origin. The exposed volcanoes may have been protected from erosion by the surrounding ice sheet because of more competent rock or high elevation above the ice sheet. -from Authors

Beyond the Margins: Reflective Writing and Development of Reflective Capacity in Medical Education

Science.gov (United States)

Reis, Shmuel P.

2010-01-01

Reflective capacity has been described as an essential characteristic of professionally competent clinical practice, core to ACGME competencies. Reflection has been recently linked to promoting effective use of feedback in medical education and associated with improved diagnostic accuracy, suggesting promising outcomes. There has been a proliferation of reflective writing pedagogy within medical education to foster development of reflective capacity, extend empathy with deepened understanding of patients’ experience of illness, and promote practitioner well-being. At Alpert Med, “interactive” reflective writing with guided individualized feedback from interdisciplinary faculty to students’ reflective writing has been implemented in a Doctoring course and Family Medicine clerkship as an educational method to achieve these aims. Such initiatives, however, raise fundamental questions of reflection definition, program design, efficacy of methods, and outcomes assessment. Within this article, we consider opportunities and challenges associated with implementation of reflective writing curricula for promotion of reflective capacity within medical education. We reflect upon reflection. PMID:20407840

New mechanism for enhancing ash removal efficiency and reducing tritium inventory

International Nuclear Information System (INIS)

Li Chengyue; Deng Baiquan; Yan Jiancheng

2007-01-01

A new mechanism is suggested to suppress ash particle back streams in the divertor region of our fusion experimental breeder (FEB) reactor for enhancing the ash removal efficiency and reducing the tritium inventory by applications of the nonlinear effect of high power rf ponderomotive force potential which reflects the plate-released and re-ionized He + back to the plate. Meanwhile, the potential does not hinder α particles, which are coming from scraping of the layer, flowing to the target plate. However, it does stop tritium ions flowing to the target. Based on the FEB design parameters, our calculations have shown that the ash removal efficiency can be improved by as much as 40% if the parallel component of rf field 150-200 V/cm is applied to the location at a perpendicular distance L=20 cm apart from the plate and the plate-recycling neutral helium atom energy is about 0.75 eV, at the same time, the tritium inventory can be reduced to some extent. (authors)

Particle adhesion and removal

CERN Document Server

Mittal, K L

2015-01-01

The book provides a comprehensive and easily accessible reference source covering all important aspects of particle adhesion and removal.  The core objective is to cover both fundamental and applied aspects of particle adhesion and removal with emphasis on recent developments.  Among the topics to be covered include: 1. Fundamentals of surface forces in particle adhesion and removal.2. Mechanisms of particle adhesion and removal.3. Experimental methods (e.g. AFM, SFA,SFM,IFM, etc.) to understand  particle-particle and particle-substrate interactions.4. Mechanics of adhesion of micro- and  n

Ab initio study of intrinsic profiles of liquid metals and their reflectivity

Science.gov (United States)

del Rio, B. G.; Souto, J.; Alemany, M. M. G.; González, L. E.

2017-08-01

The free surfaces of liquid metals are known to exhibit a stratified profile that, in favourable cases, shows up in experiments as a peak in the ratio between the reflectivity function and that of an ideal step-like profile. This peak is located at a wave-vector related to the distance between the layers of the profile. In fact the surface roughness produced by thermally induced capillary waves causes a depletion of the previous so called intrinsic reflectivity by a damping factor that may hinder the observation of the peak. The behaviour of the intrinsic reflectivity below the layering peak is however far from being universal, with systems as Ga or In where the reflectiviy falls uniformly towards the q → 0 value, others like Sn or Bi where a shoulder appears at intermediate wavevectors, and others like Hg which show a minimum. We have performed extensive ab initio simulations of the free liquid surfaces of Bi, Pb and Hg, that yield direct information on the structure of the profiles and found that the macroscopic capillary wave theory usually employed in order to remove the capillary wave components fails badly in some cases for the typical sample sizes affordable in ab initio simulations. However, a microscopic method for the determination of the intrinsic profile is shown to be succesful in obtaining meaningful intrinsic profiles and corresponding reflectivities which reproduce correctly the qualitative behaviour observed experimentally.

A facile strategy to prevent trifluoroacetylation of N-terminal proline peptides

NARCIS (Netherlands)

Haase, C.; Burton, M.F.; Agten, S.M.; Brunsveld, L.

2012-01-01

Unwanted trifluoroacetylation occurred at the N-terminus of prolinyl peptides during detachment from the solid phase. This was observed when the N-a-Fmoc protecting group had been removed prior to the final TFA treatment. Subtly changing the SPPS protocol and incorporating Boc- in place of the

Determination of ten steroid hormones in animal waste manure and agricultural soil using inverse and integrated clean-up pressurized liquid extraction and gas chromatography-tandem mass spectrometry

DEFF Research Database (Denmark)

Hansen, Martin; Krogh, Kristine Andersen; Halling-Sørensen, Bent

2011-01-01

... Martin Hansen , Kristine A. Krogh , Bent Halling ... in a 22 mL PLE cell : firstly by flushing the sample with heptane to remove unwanted matrix components (inverse- PLE , i- PLE ) and secondly, performing internal clean-up (ic- PLE ) and eluting the steroid hormones by attaching an ...

Removal of radium from drinking water

International Nuclear Information System (INIS)

Lauch, R.P.

1992-08-01

The report summarizes processes for removal of radium from drinking water. Ion exchange, including strong acid and weak acid resin, is discussed. Both processes remove better than 95 percent of the radium from the water. Weak acid ion exchange does not add sodium to the water. Calcium cation exchange removes radium and can be used when hardness removal is not necessary. Iron removal processes are discussed in relation to radium removal. Iron oxides remove much less than 20 percent of the radium from water under typical conditions. Manganese dioxide removes radium from water when competition for sorption sites and clogging of sites is reduced. Filter sand that is rinsed daily with dilute acid will remove radium from water. Manganese dioxide coated filter sorption removes radium but more capacity would be desirable. The radium selective complexer selectively removes radium with significant capacity if iron fouling is eliminated

After-heat removing device

International Nuclear Information System (INIS)

Iwashige, Kengo; Otsuka, Masaya; Yokoyama, Iwao; Yamakawa, Masanori.

1990-01-01

The present invention concerns an after-heat removing device for first reactors. A heat accumulation portion provided in a cooling channel of an after-heat removing device is disposed before a coil-like heat conduction pipe for cooling of the after-heat removing device. During normal reactor operation, the temperature in the heat accumulation portion is near the temperature of the high temperature plenum due to heat conduction and heat transfer from the high temperature plenum. When the reactor is shutdown and the after-heat removing device is started, coolants cooled in the air cooler start circulation. The coolants arriving at the heat accumulation portion deprive heat from the heat accumulation portion and, ion turn, increase their temperature and then reach the cooling coil. Subsequently, the heat calorie possessed in the heat accumulation portion is reduced and the after-heat removing device is started for the operation at a full power. This can reduce the thermal shocks applied to the cooling coil or structures in a reactor vessel upon starting the after-heat removing device. (I.N.)

GEO-LEO reflectance band inter-comparison with BRDF and atmospheric scattering corrections

Science.gov (United States)

Chang, Tiejun; Xiong, Xiaoxiong Jack; Keller, Graziela; Wu, Xiangqian

2017-09-01

The inter-comparison of the reflective solar bands between the instruments onboard a geostationary orbit satellite and onboard a low Earth orbit satellite is very helpful to assess their calibration consistency. GOES-R was launched on November 19, 2016 and Himawari 8 was launched October 7, 2014. Unlike the previous GOES instruments, the Advanced Baseline Imager on GOES-16 (GOES-R became GOES-16 after November 29 when it reached orbit) and the Advanced Himawari Imager (AHI) on Himawari 8 have onboard calibrators for the reflective solar bands. The assessment of calibration is important for their product quality enhancement. MODIS and VIIRS, with their stringent calibration requirements and excellent on-orbit calibration performance, provide good references. The simultaneous nadir overpass (SNO) and ray-matching are widely used inter-comparison methods for reflective solar bands. In this work, the inter-comparisons are performed over a pseudo-invariant target. The use of stable and uniform calibration sites provides comparison with appropriate reflectance level, accurate adjustment for band spectral coverage difference, reduction of impact from pixel mismatching, and consistency of BRDF and atmospheric correction. The site in this work is a desert site in Australia (latitude -29.0 South; longitude 139.8 East). Due to the difference in solar and view angles, two corrections are applied to have comparable measurements. The first is the atmospheric scattering correction. The satellite sensor measurements are top of atmosphere reflectance. The scattering, especially Rayleigh scattering, should be removed allowing the ground reflectance to be derived. Secondly, the angle differences magnify the BRDF effect. The ground reflectance should be corrected to have comparable measurements. The atmospheric correction is performed using a vector version of the Second Simulation of a Satellite Signal in the Solar Spectrum modeling and BRDF correction is performed using a semi

Reflection groups

International Nuclear Information System (INIS)

Eggermont, G.

2006-01-01

In 2005, PISA organised proactive meetings of reflection groups on involvement in decision making, expert culture and ethical aspects of radiation protection.All reflection group meetings address particular targeted audiences while the output publication in book form is put forward

Monitoring nitrosamines in large water distribution systems and their removal using cyclodextrin polyurethanes

OpenAIRE

2010-01-01

M.Sc. The disinfection of drinking water is an important step in the water treatment process. However, toxic (unwanted) disinfection by-products (DBPs) are often produced during the disinfection of drinking water. One such group of DBPs are the nitrosamines such as N-Nitrosodimethylamine (NDMA). Nitrosamines, particularly NDMA, are highly carcinogenic, mutagenic and teratogenic. The US Environmental Protection Agency (USEPA) placed these compounds into the group B2, which indicates compoun...

Wholesale debris removal from LEO

Science.gov (United States)

Levin, Eugene; Pearson, Jerome; Carroll, Joseph

2012-04-01

Recent advances in electrodynamic propulsion make it possible to seriously consider wholesale removal of large debris from LEO for the first time since the beginning of the space era. Cumulative ranking of large groups of the LEO debris population and general limitations of passive drag devices and rocket-based removal systems are analyzed. A candidate electrodynamic debris removal system is discussed that can affordably remove all debris objects over 2 kg from LEO in 7 years. That means removing more than 99% of the collision-generated debris potential in LEO. Removal is performed by a dozen 100-kg propellantless vehicles that react against the Earth's magnetic field. The debris objects are dragged down and released into short-lived orbits below ISS. As an alternative to deorbit, some of them can be collected for storage and possible in-orbit recycling. The estimated cost per kilogram of debris removed is a small fraction of typical launch costs per kilogram. These rates are low enough to open commercial opportunities and create a governing framework for wholesale removal of large debris objects from LEO.

Removal of arsenic and iron removal from drinking water using coagulation and biological treatment.

Science.gov (United States)

Pramanik, Biplob Kumar; Pramanik, Sagor Kumar; Suja, Fatihah

2016-02-01

Effects of biological activated carbon (BAC), biological aerated filter (BAF), alum coagulation and Moringa oleifera coagulation were investigated to remove iron and arsenic contaminants from drinking water. At an initial dose of 5 mg/L, the removal efficiency for arsenic and iron was 63% and 58% respectively using alum, and 47% and 41% respectively using Moringa oleifera. The removal of both contaminants increased with the increase in coagulant dose and decrease in pH. Biological processes were more effective in removing these contaminants than coagulation. Compared to BAF, BAC gave greater removal of both arsenic and iron, removing 85% and 74%, respectively. Longer contact time for both processes could reduce the greater concentration of arsenic and iron contaminants. The addition of coagulation (at 5 mg/L dosage) and a biological process (with 15 or 60 min contact time) could significantly increase removal efficiency, and the maximum removal was observed for the combination of alum and BAC treatment (60 min contact time), with 100% and 98.56% for arsenic and iron respectively. The reduction efficiency of arsenic and iron reduced with the increase in the concentration of dissolved organics in the feedwater due to the adsorption competition between organic molecules and heavy metals.

Skin lesion removal

Science.gov (United States)

... likely to be done when there is a concern about a skin cancer. Most often, an area the shape of an ellipse is removed, as this makes it easier to close with stitches. The entire lesion is removed, going as deep as the fat, if needed, to ...

Multi-layer thickness determination using differential-based enhanced Fourier transforms of X-ray reflectivity data

Energy Technology Data Exchange (ETDEWEB)

Poust, Benjamin [Department of Materials Science and Engineering, University of California, Los Angeles, CA (United States); Northrop Grumman Space Technology, Redondo Beach, CA (United States); Sandhu, Rajinder [Northrop Grumman Space Technology, Redondo Beach, CA (United States); Goorsky, Mark [Department of Materials Science and Engineering, University of California, Los Angeles, CA (United States)

2009-08-15

Layer thickness determination of single and multi-layer structures is achieved using a new method for generating Fourier transforms (FTs) of X-ray reflectivity data. This enhanced Fourier analysis is compared to other techniques in the determination of AlN layer thickness deposited on sapphire. In addition to demonstrably improved results, the results also agree with thicknesses determined using simulations and TEM measurements. The effectiveness of the technique is further demonstrated using the more complicated metamorphic epitaxial multi-layer AlSb/InAs structures deposited on GaAs. The approach reported here is based upon differentiating the specular intensity with respect to the vertical reciprocal space coordinate Q{sub Z}. In general, differentiation is far more effective at removing the sloping background present in reflectivity scans than logarithmic compression alone, average subtraction alone, or other methods. When combined with any of the other enhancement techniques, however, differentiation yields distinguishable discrete Fourier transform (DFT) power spectrum peaks for even the weakest and most truncated of sloping oscillations that are present in many reflectivity scans from multi-layer structures. (Abstract Copyright [2009], Wiley Periodicals, Inc.)

Liberating Moral Reflection

Science.gov (United States)

Horell, Harold D.

2013-01-01

The author argues that if we are to foster life-giving and liberating moral reflection, we must first liberate moral reflection from distortions; specifically, from the distorting effects of moral insensitivity, destructive moral relativism, and confusions resulting from a failure to understand the dynamics of moral reflection. The author proposes…

the use of fk filter in the elimination of artefacts from a shallow ...

African Journals Online (AJOL)

DJFLEX

Reflection signals from shallow seismic survey in this area are often marred by surface ... With α=angle of the wavefront with the interface (or the angle of the ray with the vertical). ... wedge-shaped zone or zones containing the unwanted.

Reflection ciphers

DEFF Research Database (Denmark)

Boura, Christina; Canteaut, Anne; Knudsen, Lars Ramkilde

2017-01-01

study the necessary properties for this coupling permutation. Special care has to be taken of some related-key distinguishers since, in the context of reflection ciphers, they may provide attacks in the single-key setting.We then derive some criteria for constructing secure reflection ciphers...

Q-switched laser removal of tattoos: a clinical and spectroscopic investigation of the mechanism

Science.gov (United States)

Siomos, Konstadinos; Bailey, Raymond T.; Cruickshank, Frank R.; Murphy, Michael

1996-01-01

The liquid phase spectra of tatoo pigments are shown to be unreliable as a basis for mechanistic deductions. The reflectance spectra of the solids from 2000 nm to 500 nm (5000 to 20,000 cm-1) are shown to accurately assess the relative loss of laser light for different pigments and to be useful in examining these to check for similarities in the pigments. The absorbance differences between the pigments are shown to be largely irrelevant in assessing the ease of tatoo removal by laser radiation of a variety of wavelengths. A multiphoton absorption mechanism with its concomitant shock wave is proposed to be responsible for the reduction of pigment particles to small sizes which the lymph system can remove. The different behavior of blue and green tattoos, treated by Q-switched ruby and Nd:YAG lasers, is attributed to the particle aggregation size of the pigments in the tattoo.

Pore diffusion limits removal of monochloramine in treatment of swimming pool water using granular activated carbon.

Science.gov (United States)

Skibinski, Bertram; Götze, Christoph; Worch, Eckhard; Uhl, Wolfgang

2018-04-01

Overall apparent reaction rates for the removal of monochloramine (MCA) in granular activated carbon (GAC) beds were determined using a fixed-bed reactor system and under conditions typical for swimming pool water treatment. Reaction rates dropped and quasi-stationary conditions were reached quickly. Diffusional mass transport in the pores was shown to be limiting the overall reaction rate. This was reflected consistently in the Thiele modulus, in the effect of temperature, pore size distribution and of grain size on the reaction rates. Pores <2.5 times the diameter of the monochloramine molecule were shown to be barely accessible for the monochloramine conversion reaction. GACs with a significant proportion of large mesopores were found to have the highest overall reactivity for monochloramine removal. Copyright © 2017 Elsevier Ltd. All rights reserved.

Evaluation of retro-reflective coating performance by reflectance and perceived relative brightness measurements

International Nuclear Information System (INIS)

Luse, Kaiva; Pausus, Anete; Karitans, Varis; Ozolins, Maris; Tukisa, Madara

2011-01-01

Retro-reflective properties of six types and five different colors or retro-reflective materials were discussed in this paper. Reflectance optical indicatrix of samples was determined and compared to obtained psychophyisical data of perceived brightness of human observer. Microscopic structure of the retro-reflective active regions of RR's was studied. Statistically significant differences in reflectivity and brightness of various types and colors of RR's were found.

Reflective writing: the student nurse's perspective on reflective writing and poetry writing.

Science.gov (United States)

Coleman, Dawn; Willis, Diane S

2015-07-01

Reflective writing is a mandatory part of nurse education but how students develop their skills and use reflection as part of their experiential learning remains relatively unknown. Understanding reflective writing in all forms from the perspective of a student nurse is therefore important. To explore the use of reflective writing and the use of poetry in pre-registered nursing students. A qualitative design was employed to explore reflective writing in pre-registered nursing students. A small university in Scotland. BSc (Hons) Adult and Mental Health Pre-registration Student Nurses. Two focus groups were conducted with 10 student nurses during March 2012. Data was analysed thematically using the framework of McCarthy (1999). Students found the process of reflective writing daunting but valued it over time. Current educational methods, such as assessing reflective accounts, often lead to the 'narrative' being watered down and the student feeling judged. Despite this, reflection made students feel responsible for their own learning and research on the topic. Some students felt the use of models of reflection constricting, whilst poetry freed up their expression allowing them to demonstrate the compassion for their patient under their care. Poetry writing gives students the opportunity for freedom of expression, personal satisfaction and a closer connection with their patients, which the more formal approach to reflective writing did not offer. There is a need for students to have a safe and supportive forum in which to express and have their experiences acknowledged without the fear of being judged. Crown Copyright © 2015. Published by Elsevier Ltd. All rights reserved.

Tube plug removal machine

International Nuclear Information System (INIS)

Hawkins, P.J.

1987-01-01

In a nuclear steam generator wherein some faulty tubes have been isolated by mechanical plugging, to remove a selected plug without damaging the associated tube, a plug removal machine is used. The machine drills into a plug portion with a tap drill bit having a drill portion a tap portion and a threaded portion, engaging that plug portion with the threaded portion after the drilled hole has been threaded by the tap portion thereof, and removing a portion of the plug in the tube with a counterbore drill bit mounted concentrically about the tap drill bit. A trip pin and trip spline disengage the tap drill bit from the motor. The counterbore drill bit is thereafter self-centered with respect to the tube and plug about the now stationary tap drill bit. After a portion of the plug has been removed by the counterbore drill bit, pulling on the top drill bit by grippers on slots will remove the remaining plug portion from the tube. (author)

Arsenic removal by electrocoagulation process: Recent trends and removal mechanism.

Science.gov (United States)

Nidheesh, P V; Singh, T S Anantha

2017-08-01

Arsenic contamination in drinking water is a major issue in the present world. Arsenicosis is the disease caused by the regular consumption of arsenic contaminated water, even at a lesser contaminated level. The number of arsenicosis patients is increasing day-by-day. Decontamination of arsenic from the water medium is the only one way to regulate this and the arsenic removal can be fulfilled by water treatment methods based on separation techniques. Electrocoagulation (EC) process is a promising technology for the effective removal of arsenic from aqueous solution. The present review article analyzes the performance of the EC process for arsenic removal. Electrocoagulation using various sacrificial metal anodes such as aluminium, iron, magnesium, etc. is found to be very effective for arsenic decontamination. The performances of each anode are described in detail. A special focus has been made on the mechanism behind the arsenite and arsenate removal by EC process. Main trends in the disposal methods of sludge containing arsenic are also included. Comparison of arsenic decontamination efficiencies of chemical coagulation and EC is also reported. Copyright © 2017 Elsevier Ltd. All rights reserved.

Removal of radionuclides from household water

International Nuclear Information System (INIS)

Vesterbacka, P.; Turtiainen, T.; Haemaelaeinen, K.; Salonen, L.; Arvela, H.

2007-02-01

Research upon methods for removing radionuclides from household water was initiated in Finland in 1995. Three research projects, of which two were carried out with National Technology Agency of Finland and one with CEC, have been completed by the end of 2002. One of the main objectives of the research was to compose a guidebook for consumers and water treatment companies. Radon can be removed from household water by aeration and by activated carbon filtration. Aerators that are well designed and set up can remove over 90% of waterborne radon. The best aerators have achieved removal efficiencies that are nearly 100%. However, setting up an aeration system requires thorough planning. Also, activated carbon filtration removes radon efficiently. The removal efficiencies have been over 90%, often nearly 100%. Depending on the water quality and usage, the carbon batch inside the filter needs to be changed every 2 - 3 years. Since activated carbon filters emit gamma radiation while in use, they should not be installed inside the dwelling but in a separate building or by the well. It is recommended that uranium be removed from drinking water by anion exchange, which is the most efficient removal method for this purpose. Typically, the removal efficiencies are nearly 100%. The one exception is the so called tap filter, the removal efficiency of which depends on uranium concentration in raw water and the rate of water flow. High saline concentration in water may extricate uranium from ion exchange resin. Changes in plumbing pressure or pH-value do not have any significant influence in uranium retention. Removal efficiencies of lead and polonium vary a lot depending on the chemical form in which they occur in water. They can be reliably removed from water by reverse osmosis only. Other treatment methods, such as ion exchange and activated carbon filtration, remove lead and polonium partly. Lead and polonium are removed more efficiently when they are bound onto smaller

REMOVAL OF ARSENIC FROM DRINKING WATER SUPPLIES BY IRON REMOVAL PROCESS

Science.gov (United States)

This design manual is an in-depth presentation of the steps required to design and operate a water treatment plant for removal of arsenic in the As (V) form from drinking water using an iron removal process. The manual also discusses the capital and operating costs including many...

Evaluation of retro-reflective coating performance by reflectance and perceived relative brightness measurements

Energy Technology Data Exchange (ETDEWEB)

Luse, Kaiva; Pausus, Anete; Karitans, Varis; Ozolins, Maris; Tukisa, Madara, E-mail: kaiva.luse@gmail.com [University of Latvia, Optometry and Vision Science Department, Kengaraga street 8, Riga LV-1063 (Latvia)

2011-06-23

Retro-reflective properties of six types and five different colors or retro-reflective materials were discussed in this paper. Reflectance optical indicatrix of samples was determined and compared to obtained psychophyisical data of perceived brightness of human observer. Microscopic structure of the retro-reflective active regions of RR's was studied. Statistically significant differences in reflectivity and brightness of various types and colors of RR's were found.

CRBRP decay heat removal systems

International Nuclear Information System (INIS)

Hottel, R.E.; Louison, R.; Boardman, C.E.; Kiley, M.J.

1977-01-01

The Decay Heat Removal Systems for the Clinch River Breeder Reactor Plant (CRBRP) are designed to adequately remove sensible and decay heat from the reactor following normal shutdown, operational occurrences, and postulated accidents on both a short term and a long term basis. The Decay Heat Removal Systems are composed of the Main Heat Transport System, the Main Condenser and Feedwater System, the Steam Generator Auxiliary Heat Removal System (SGAHRS), and the Direct Heat Removal Service (DHRS). The overall design of the CRBRP Decay Heat Removal Systems and the operation under normal and off-normal conditions is examined. The redundancies of the system design, such as the four decay heat removal paths, the emergency diesel power supplies, and the auxiliary feedwater pumps, and the diversities of the design such as forced circulation/natural circulation and AC Power/DC Power are presented. In addition to overall design and system capabilities, the detailed designs for the Protected Air Cooled Condensers (PACC) and the Air Blast Heat Exchangers (ABHX) are presented

Game Theoretic Analysis of Pricing and Cooperative Advertising in a Reverse Supply Chain for Unwanted Medications in Households

Directory of Open Access Journals (Sweden)

Meina Hua

2017-10-01

Full Text Available Improper disposal of household unwanted medications (UMs is an emergency problem around the world that adversely affects the sustainability of the environment and human’s health. However, the current disposal practices, mainly based on advertising and collecting status, are unsatisfactory in most countries and regions. Thus, some scholars proposed an alternative disposal practice that is to provide incentives to customers. This study aims to compare a Single Model (advertising only with a Joint Model (advertising with take-back pricing in a two-echelon reverse supply chain (RSC that is composed of one disposer and one collector. In each model, four games (non-cooperative, collector as the Stackelberg leader, disposer as the Stackelberg leader, and cooperative were established in order to identify the optimal pricing and advertising strategies for both members. The results of the study indicate that there is a Pareto dominant range for Joint Model compared to Single Model, whereas Single Model has no Pareto improvement in any games. Furthermore, in non-cooperative games of Joint Model, it is better to implement the leader-follower structure rather than simultaneous movement structure. Additionally, it is verified that the cooperative game is feasible, which leads to the cooperation between the disposer and the collector, and the extra profit from the cooperation can be shared based on the Nash bargaining game. However, in Single Model, it is better for the disposer to act as a channel leader and the collector figures the follower.

Experimental study of regenerative desiccant integrated solar dryer with and without reflective mirror

Energy Technology Data Exchange (ETDEWEB)

Shanmugam, V. [Department of Mechanical Engineering, Sathyabama University, Chennai, 600 119 (India); Natarajan, E. [Institute for Energy Studies, College of Engineering, Anna University, Chennai, 600 025 (India)

2007-06-15

An indirect forced convection with desiccant integrated solar dryer has been built and tested. The main parts are: a flat plate solar air collector, a drying chamber, desiccant bed and a centrifugal blower. The system is operated in two modes, sunshine hours and off sunshine hours. During sun shine hours the hot air from the flat plate collector is forced to the drying chamber for drying the product and simultaneously the desiccant bed receives solar radiation directly and through the reflected mirror. In the off sunshine hours, the dryer is operated by circulating the air inside the drying chamber through the desiccant bed by a reversible fan. The dryer is used to dry 20 kg of green peas and pineapple slices. Drying experiments were conducted with and without the integration of desiccant unit. The effect of reflective mirror on the drying potential of desiccant unit was also investigated. With the inclusion of reflective mirror, the drying potential of the desiccant material is increased by 20% and the drying time is reduced. The drying efficiency of the system varies between 43% and 55% and the pick-up efficiency varies between 20% and 60%, respectively. Approximately in all the drying experiments 60% of moisture is removed by air heated using solar energy and the remainder by the desiccant. The inclusion of reflective mirror on the desiccant bed makes faster regeneration of the desiccant material. (author)

Reflection as Self-Assessment

Science.gov (United States)

Pappas, Marjorie L.

2010-01-01

In this article, the author discusses how reflection can be used as self-assessment. Reflection involves not only thinking about a learning experience, but also questioning parts of the experience. Reflection is thinking about what one knows from the learning experience, what one might do differently the next time. Reflection is wondering about…

Designing a Reflective Teacher Education Course and Its Contribution to ELT Teachers' Reflectivity

Science.gov (United States)

Tajik, Leila; Pakzad, Kazem

2016-01-01

Researchers in the present study planned a reflective teacher education course and documented the contribution of such a course to improving teachers' reflectivity. Five English teachers took part in the reflective teacher education course designed by the researchers. To record how the course could help improve reflective teaching, researchers…

Trends of Avicennia marina Productivity as Influenced by Climatic ...

African Journals Online (AJOL)

The inorganic ions, sodium (Na) and Chlorine (Cl) started to accumulate in the plant in order to maintain the homeostatic control, turgor pressure and osmotic adjustment. Accumulation of these ions and salts resulted to high productivity of leaf litter in September as a means of removing excess ions and unwanted salts.

Fruit availability, frugivore satiation and seed removal in 2 primate-dispersed tree species.

Science.gov (United States)

Ratiarison, Sandra; Forget, Pierre-Michel

2011-09-01

During a mast-fruiting event we investigated spatial variability in fruit availability, consumption, and seed removal at two sympatric tree species, Manilkara bidentata and M. huberi (Sapotaceae) at Nouragues Natural Reserve, French Guiana. We addressed the question of how Manilkara density and fruits at the community level might be major causes of variability in feeding assemblages between tree species. We thus explored how the frugivore assemblages differed between forest patches with contrasting relative Manilkara density and fruiting context. During the daytime, Alouatta seniculus was more often observed in M. huberi crowns at Petit Plateau (PP) with the greatest density of Manilkara spp. and the lowest fruit diversity and availability, whereas Cebus apella and Saguinus midas were more often observed in M. bidentata crowns at both Grand Plateau (GP), with a lowest density of M. bidentata and overall greater fruit supply, and PP. Overall, nearly 53% and 15% of the M. bidentata seed crop at GP and PP, respectively, and about 47% of the M. huberi seed crop were removed, otherwise either spit out or defecated beneath trees, or dropped in fruits. Small-bodied primates concentrated fallen seeds beneath parent trees while large-bodied primate species removed and dispersed more seeds away from parents. However, among the latter, satiated A. seniculus wasted seeds under conspecific trees at PP. Variations in feeding assemblages, seed removal rates and fates possibly reflected interactions with extra-generic fruit species at the community level, according to feeding choice, habitat preferences and ranging patterns of primate species. © 2011 ISZS, Blackwell Publishing and IOZ/CAS.

Removal of radionuclides from household water

International Nuclear Information System (INIS)

Vesterbacka, P.; Turtiainen, T.; Haemaelaeinen, K.; Salonen, L.; Arvela, H.

2003-10-01

Research upon methods for removing radionuclides from household water was initiated in Finland in 1995. Three research projects, of which two were carried out with National Technology Agency of Finland and one with CEC, have been completed by the end of 2002. One of the main objectives of the research was to compose a guidebook for consumers and water treatment companies. Radon can be removed from household water by aeration and by activated carbon filtration. Aerators that are well designed and set up can remove over 90% of waterborne radon. The best aerators have achieved removal efficiencies that are nearly 100%. However, setting up an aeration system requires thorough planning. Also, activated carbon filtration removes radon efficiently. The removal efficiencies have been over 90%, often nearly 100%. Depending on the water quality and usage, the carbon batch inside the filter needs to be changed every 2-3 years. Since activated carbon filters emit gamma radiation while in use, they should not be installed inside the dwelling but in a separate building or by the well. It is recommended that uranium be removed from drinking water by anion exchange, which is the most efficient removal method for this purpose. Typically, the removal efficiencies are nearly 100%. The one exception is the so called tap filter, the removal efficiency of which depends on uranium concentration in raw water and the rate of water flow. High saline concentration in water may extricate uranium from ion exchange resin. Changes in plumbing pressure or pH-value do not have any significant influence in uranium retention. Removal efficiencies of lead and polonium vary a lot depending on the chemical form in which they occur in water. They can be reliably removed from water by reverse osmosis only. Other treatment methods, such as ion exchange and activated carbon filtration, remove lead and polonium partly. Lead and polonium are removed more efficiently when they are bound onto smaller particles

Sum frequency generation and catalytic reaction studies of the removal of the organic capping agents from Pt nanoparticles by UV-ozone treatment

Energy Technology Data Exchange (ETDEWEB)

Aliaga, Cesar; Park, Jeong Y.; Yamada, Yusuke; Lee, Hyun Sook; Tsung, Chia-Kuang; Yang, Peidong; Somorjai, Gabor A.

2009-12-10

We report the structure of the organic capping layers of platinum colloid nanoparticles and their removal by UV-ozone exposure. Sum frequency generation vibrational spectroscopy (SFGVS) studies identify the carbon-hydrogen stretching modes on poly(vinylpyrrolidone) (PVP) and tetradecyl tributylammonium bromide (TTAB)-capped platinum nanoparticles. We found that the UV-ozone treatment technique effectively removes the capping layer on the basis of several analytical measurements including SFGVS, X-ray photoelectron spectroscopy, and diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS). The overall shape of the nanoparticles was preserved after the removal of capping layers, as confirmed by transmission electron microscopy (TEM). SFGVS of ethylene hydrogenation on the clean platinum nanoparticles demonstrates the existence of ethylidyne and di-{sigma}-bonded species, indicating the similarity between single-crystal and nanoparticle systems.

Hot Spot Removal System: System description

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-09-01

Hazardous wastes contaminated with radionuclides, chemicals, and explosives exist across the Department of Energy complex and need to be remediated due to environmental concerns. Currently, an opportunity is being developed to dramatically reduce remediation costs and to assist in the acceleration of schedules associated with these wastes by deploying a Hot Spot Removal System. Removing the hot spot from the waste site will remove risk driver(s) and enable another, more cost effective process/option/remedial alternative (i.e., capping) to be applied to the remainder of the site. The Hot Spot Removal System consists of a suite of technologies that will be utilized to locate and remove source terms. Components of the system can also be used in a variety of other cleanup activities. This Hot Spot Removal System Description document presents technologies that were considered for possible inclusion in the Hot Spot Removal System, technologies made available to the Hot Spot Removal System, industrial interest in the Hot Spot Removal System`s subsystems, the schedule required for the Hot Spot Removal System, the evaluation of the relevant technologies, and the recommendations for equipment and technologies as stated in the Plan section.

Hot Spot Removal System: System description

International Nuclear Information System (INIS)

1997-09-01

Hazardous wastes contaminated with radionuclides, chemicals, and explosives exist across the Department of Energy complex and need to be remediated due to environmental concerns. Currently, an opportunity is being developed to dramatically reduce remediation costs and to assist in the acceleration of schedules associated with these wastes by deploying a Hot Spot Removal System. Removing the hot spot from the waste site will remove risk driver(s) and enable another, more cost effective process/option/remedial alternative (i.e., capping) to be applied to the remainder of the site. The Hot Spot Removal System consists of a suite of technologies that will be utilized to locate and remove source terms. Components of the system can also be used in a variety of other cleanup activities. This Hot Spot Removal System Description document presents technologies that were considered for possible inclusion in the Hot Spot Removal System, technologies made available to the Hot Spot Removal System, industrial interest in the Hot Spot Removal System''s subsystems, the schedule required for the Hot Spot Removal System, the evaluation of the relevant technologies, and the recommendations for equipment and technologies as stated in the Plan section

Self-Reflection

DEFF Research Database (Denmark)

Fausing, Bent

2016-01-01

will take a look at the establishing of the modern self and possibilities of self-reflection, too. My examples will be from the so-called dark-selfies and from a new selfie form, which merge the present with the previous progressing into the future. I will discuss the media reflections as loos and/or gain...

Personal Reflections

Indian Academy of Sciences (India)

Home; Journals; Resonance – Journal of Science Education. Personal Reflections. Articles in Resonance – Journal of Science Education. Volume 6 Issue 3 March 2001 pp 90-93 Personal Reflections. Why did I opt for Career in Science? Jayant V Narlikar · More Details Fulltext PDF. Volume 9 Issue 8 August 2004 pp 89-89 ...

Using visible and near-infrared diffuse reflectance spectroscopy for predicting soil properties based on regression with peaks parameters as derived from continuum-removed spectra

Science.gov (United States)

Vasat, Radim; Klement, Ales; Jaksik, Ondrej; Kodesova, Radka; Drabek, Ondrej; Boruvka, Lubos

2014-05-01

Visible and near-infrared diffuse reflectance spectroscopy (VNIR-DRS) provides a rapid and inexpensive tool for simultaneous prediction of a variety of soil properties. Usually, some sophisticated multivariate mathematical or statistical methods are employed in order to extract the required information from the raw spectra measurement. For this purpose especially the Partial least squares regression (PLSR) and Support vector machines (SVM) are the most frequently used. These methods generally benefit from the complexity with which the soil spectra are treated. But it is interesting that also techniques that focus only on a single spectral feature, such as a simple linear regression with selected continuum-removed spectra (CRS) characteristic (e.g. peak depth), can often provide competitive results. Therefore, we decided to enhance the potential of CRS taking into account all possible CRS peak parameters (area, width and depth) and develop a comprehensive methodology based on multiple linear regression approach. The eight considered soil properties were oxidizable carbon content (Cox), exchangeable (pHex) and active soil pH (pHa), particle and bulk density, CaCO3 content, crystalline and amorphous (Fed) and amorphous Fe (Feox) forms. In four cases (pHa, bulk density, Fed and Feox), of which two (Fed and Feox) were predicted reliably accurately (0.50 interestingly, in the case of particle density, the presented approach outperformed the PLSR and SVM dramatically offering a fairly accurate prediction (R2cv = 0.827) against two failures (R2cv = 0.034 and 0.121 for PLSR and SVM, resp.). In last two cases (Cox and CaCO3) a slightly worse results were achieved then with PLSR and SVM with overall fairly accurate prediction (R2cv > 0.80). Acknowledgment: Authors acknowledge the financial support of the Ministry of Agriculture of the Czech Republic (grant No. QJ1230319).

Ecological trap for Cnemidophorus ocellifer Spix 1825 (Squamata: Teiidae during removal of vegetation

Directory of Open Access Journals (Sweden)

Lucas Bezerra de Mattos Brito

2012-11-01

Full Text Available Animals must anticipate future conditions according to current environmental clues. When habitats are rapidly modified, these signs may not reflect the actual environmental quality, leading to a decreased fitness of an individual and its population. During an activity of faunal rescue and scaring away in the coast of Rio Grande do Norte, Brazil, evidence of an ecological trap for the lizard Cnemidophorus ocellifer was observed. We suggest some actions which can minimize the impact of vegetation removal activities on lizards, such as: i better planning before proceeding with deforestation; and ii capture and release of lizards in appropriate locations.

Do writing and storytelling skill influence assessment of reflective ability in medical students' written reflections?

Science.gov (United States)

Aronson, Louise; Niehaus, Brian; DeVries, Charlie D; Siegel, Jennifer R; O'Sullivan, Patricia S

2010-10-01

Increasingly, students are asked to write reflections as part of their medical education, but some question the influence of other factors on the evaluation of these reflections. In this pilot study, the investigators determined whether scores from a validated rubric to measure reflective ability were affected by irrelevant variance resulting from writing or storytelling ability. Students in clerkships wrote reflections on professionalism. All were given identical prompts, with half receiving additional structured guidelines on reflection. Sixty reflections, 30 from each group, were randomly chosen and scored for reflection, writing, and storytelling by trained raters using validated rubrics. There was no correlation between reflection and either writing (r = 0.049, P = .35) or storytelling (r = 0.14, P = .13). The guidelines increased reflection, but not writing or storytelling scores. Reflection is a distinct construct unaffected by learners' writing or storytelling skills. These findings support reflective ability as a distinct skill.

The Normalization of Surface Anisotropy Effects Present in SEVIRI Reflectances by Using the MODIS BRDF Method

Science.gov (United States)

Proud, Simon Richard; Zhang, Qingling; Schaaf, Crystal; Fensholt, Rasmus; Rasmussen, Mads Olander; Shisanya, Chris; Mutero, Wycliffe; Mbow, Cheikh; Anyamba, Assaf; Pak, Ed;

Investigating the removal of body piercings.

Science.gov (United States)

Armstrong, Myrna L; Roberts, Alden E; Koch, Jerome R; Saunders, Jana C; Owen, Donna C

2007-05-01

Although body piercing procurement continues to increase, 13% to 18% of them are removed. Reasons for piercing removal in college students were examined with three groups: (a) those who kept all their piercings, (b) those who removed some, or (c) those who removed all of their body piercings. Of the sample, 41% were still pierced; 50% in their lifetime. Their major purpose for the body piercing was "helped them feel unique." Females obtained more (in high school) and then removed more, usually as upperclassmen. Males and females reported themselves as risk takers at procedure time and currently; however, only 10% cited deviancy as a reason for the body piercing(s). Only removal elements of "I just got tired of it" and "I just decided to remove it" were present, especially with the Some Removed Group. Further examination of body piercing building personal distinctiveness and self-identity to promote their need of uniqueness is suggested.

A New Definition of Punishment

Science.gov (United States)

Hall, Philip S.

2013-01-01

Punishment is a procedure in which responses are followed by either the removal of positive reinforcement or the presentation of an aversive stimulus (Skinner, 1953) that results in a decrease in the frequency and/or intensity of the response (Azrin & Holtz, 1966). By definition, punishment seeks to stop unacceptable, unwanted, and bothersome…

Near zero reflection by nanostructured anti-reflection coating design for Si substrates

Science.gov (United States)

Al-Fandi, Mohamed; Makableh, Yahia F.; Khasawneh, Mohammad; Rabady, Rabi

2018-05-01

The nanostructure design of near zero reflection coating for Si substrates by using ZnO Nanoneedles (ZnONN) is performed and optimized for the visible spectral range. The design investigates the ZnONN tip to body ratio effect on the anti-reflection coating properties. Different tip to body ratios are used on Si substrates. Around zero reflection is achieved by the Nanoneedles structure design presented in this work, leading to minimal reflection losses from the Si surface. The current design evolves a solution to optical losses and surface contamination effects associated with Si solar cells.

Determination of wafer bonding mechanisms for plasma activated SiN films with x-ray reflectivity

Energy Technology Data Exchange (ETDEWEB)

Hayashi, S [Department of Materials Science and Engineering, University of California, Los Angeles, CA 90095 (United States); Sandhu, R [Department of Materials Science and Engineering, University of California, Los Angeles, CA 90095 (United States); Wojtowicz, M [Northrop Grumman Space Technology, Redondo Beach, CA 90278 (United States); Sun, Y [Department of Chemical Engineering, University of California, Los Angeles, CA 90095 (United States); Hicks, R [Department of Chemical Engineering, University of California, Los Angeles, CA 90095 (United States); Goorsky, M S [Department of Materials Science and Engineering, University of California, Los Angeles, CA 90095 (United States)

2005-05-21

Specular and diffuse x-ray reflectivity measurements were employed for wafer bonding studies of surface and interfacial reactions in {approx}800 A thick SiN films deposited on III-V substrates. CuK{sub {alpha}}{sub 1} radiation was employed for these measurements. The as-deposited films show very low surface roughness and uniform, high density SiN. Reflectivity measurements show that an oxygen plasma treatment converts the nitride surface to a somewhat porous SiO{sub x} layer (67 A thick, at 80% of SiO{sub 2} density), with confirmation of the oxide formation from x-ray photoelectron spectroscopy. Reactions at the bonded interface of two oxygen plasma treated SiN layers were examined using a bonded structure from which one of the III-V wafers is removed. Reflectivity measurements of bonded structures annealed at 150 deg. C and 300 deg. C show an increase in the SiO{sub x} layer density and thickness and even a density gradient across this interface. The increase in density is correlated with an increase in bond strength, where after the 300 deg. C anneal, a high interfacial bond strength, exceeding the bulk strength, was achieved.

27 CFR 25.251 - Authorized removals.

Science.gov (United States)

2010-04-01

..., DEPARTMENT OF THE TREASURY LIQUORS BEER Removal of Brewer's Yeast and Other Articles § 25.251 Authorized removals. (a) Brewer's yeast. A brewer may remove brewer's yeast, in liquid or solid form containing not... including the words “Brewer's Yeast.” (c) Pipeline. If brewer's yeast is removed by pipeline, the pipeline...

Postgraduate Education to Support Organisation Change: A Reflection on Reflection

Science.gov (United States)

Stewart, Jim; Keegan, Anne; Stevens, Pam

2008-01-01

Purpose: This paper aims to explore how teaching and assessing reflective learning skills can support postgraduate practitioners studying organisational change and explores the challenges for tutors in assessing these journals. Design/methodology/approach: Assessment criteria were developed from the literature on reflective practice and…

[Acrylic resin removable partial dentures].

Science.gov (United States)

de Baat, C; Witter, D J; Creugers, N H J

2011-01-01

An acrylic resin removable partial denture is distinguished from other types of removable partial dentures by an all-acrylic resin base which is, in principle, solely supported by the edentulous regions of the tooth arch and in the maxilla also by the hard palate. When compared to the other types of removable partial dentures, the acrylic resin removable partial denture has 3 favourable aspects: the economic aspect, its aesthetic quality and the ease with which it can be extended and adjusted. Disadvantages are an increased risk of caries developing, gingivitis, periodontal disease, denture stomatitis, alveolar bone reduction, tooth migration, triggering of the gag reflex and damage to the acrylic resin base. Present-day indications are ofa temporary or palliative nature or are motivated by economic factors. Special varieties of the acrylic resin removable partial denture are the spoon denture, the flexible denture fabricated of non-rigid acrylic resin, and the two-piece sectional denture. Furthermore, acrylic resin removable partial dentures can be supplied with clasps or reinforced by fibers or metal wires.

Device for removing impurities from liquid metals

International Nuclear Information System (INIS)

Naito, Kesahiro; Yokota, Norikatsu; Shimoyashiki, Shigehiro; Takahashi, Kazuo; Ishida, Tomio.

1984-01-01

Purpose: To attain highly reliable and efficient impurity removal by forming temperature distribution the impurity removing device thereby providing the function of corrosion product trap, nuclear fission product trap and cold trap under the conditions suitable to the impurity removing materials. Constitution: The impurity removing device comprises a container containing impurity removing fillers. The fillers comprise material for removing corrosion products, material for removing nuclear fission products and material for removing depositions from liquid sodium. The positions for the respective materials are determined such that the materials are placed under the temperature conditions easy to attain their function depending on the temperature distribution formed in the removing device, whereby appropriate temperature condition is set to each of the materials. (Yoshino, Y.)

VDTT removal system functional design criteria

International Nuclear Information System (INIS)

Legare, D.E.

1996-01-01

Two Velocity Density Temperature Trees (H-2-815016) are to be removed from risers 14A and 1B of tank 241-SY-101. This document provides functional design criteria for the removal system. The removal system consists of a Liquid Removal Tool, Flexible Receiver (H-2-79216), Burial Container, Transport Trailers, and associated equipment

Sequential fitting-and-separating reflectance components for analytical bidirectional reflectance distribution function estimation.

Science.gov (United States)

Lee, Yu; Yu, Chanki; Lee, Sang Wook

2018-01-10

We present a sequential fitting-and-separating algorithm for surface reflectance components that separates individual dominant reflectance components and simultaneously estimates the corresponding bidirectional reflectance distribution function (BRDF) parameters from the separated reflectance values. We tackle the estimation of a Lafortune BRDF model, which combines a nonLambertian diffuse reflection and multiple specular reflectance components with a different specular lobe. Our proposed method infers the appropriate number of BRDF lobes and their parameters by separating and estimating each of the reflectance components using an interval analysis-based branch-and-bound method in conjunction with iterative K-ordered scale estimation. The focus of this paper is the estimation of the Lafortune BRDF model. Nevertheless, our proposed method can be applied to other analytical BRDF models such as the Cook-Torrance and Ward models. Experiments were carried out to validate the proposed method using isotropic materials from the Mitsubishi Electric Research Laboratories-Massachusetts Institute of Technology (MERL-MIT) BRDF database, and the results show that our method is superior to a conventional minimization algorithm.

Determination of Stress Profiles in Expanded Austenite by Combining Successive Layer Removal and GI-XRD

DEFF Research Database (Denmark)

Fernandes, Frederico Augusto Pires; Christiansen, Thomas Lundin; Somers, Marcel A. J.

2014-01-01

The present work deals with the evaluation of the residual-stress profile in expanded-austenite by successive removal steps using GI-XRD. Preliminary results indicate stresses of several GPa's from 111 and 200 diffraction lines. These stresses appear largest for the 200 reflection. The strain......-free lattice parameter decayed smoothly with depth, while for the compressive stress a maximum value is observed at some depth below the surface. Additionally a good agreement was found between the nitrogen profile determined with GDOES analysis and the strain-free lattice parameter from XRD....

Techniques for removing contaminated concrete surfaces

International Nuclear Information System (INIS)

Halter, J.M.; Sullivan, R.G.

1981-01-01

This discussion compares various techniques that have been used to clean concrete surfaces by removing the surface. Three techniques which have been investigated by the Pacific Northwest Laboratory for removing surfaces are also described: the water cannon, the concrete spaller, and high-pressure water jet. The equipment was developed with the assumption that removal of the top 1/8 to 1/4 in. of surface would remove most of the contamination. If the contamination has gone into cracks or deep voids in the surface, the removal processes can be repeated until the surface is acceptable

Reflection and Reflective Practice Discourses in Coaching: A Critical Analysis

Science.gov (United States)

Cushion, Christopher J.

2018-01-01

Reflection and reflective practice is seen as an established part of coaching and coach education practice. It has become a "taken-for-granted" part of coaching that is accepted enthusiastically and unquestioningly, and is assumed to be "good" for coaching and coaches. Drawing on sociological concepts, a primarily Foucauldian…

A dented LH2 recirculation line is removed from Discovery

Science.gov (United States)

1999-01-01

In the Payload Changeout Room, Launch Pad 39B, United Space Alliance and NASA workers look at the replacement main propulsion system liquid hydrogen recirculation line (left) to be installed in Shuttle Discovery's aft compartment. At right is the dented line that has been removed. The 12-inch-long dent was discovered during routine aft compartment inspections Tuesday, Dec. 7. The line recirculates hydrogen from the Shuttle main engines back to the external tank during prelaunch engine conditioning. The line is being replaced and managers expect the replacement work to take about 3 days, followed by system retests and final aft compartment close-outs. Preliminary assessments reflect a launch date of Space Shuttle Discovery on mission STS-103 no earlier than Dec. 16. STS-103 is the third servicing mission for the Hubble Space Telescope.

Ultrasound-guided removal of Implanon devices.

LENUS (Irish Health Repository)

Persaud, T

2008-11-01

Our study has shown that ultrasound-guided localisation and removal of Implanon rods is safe, practical and highly successful. Over a 4-year period, 119 patients had successful, uncomplicated removal of their subdermal devices.The technique is particularly useful for removal of the device when it is not palpable or when an attempt at removal of a palpable device has not been successful.

Carbon dioxide removal with inorganic membranes

Energy Technology Data Exchange (ETDEWEB)

Judkins, R.R.; Fain, D.E. [Oak Ridge National Laboratory, TN (United States)

1993-12-31

The increasing concentrations of greenhouse gases, particularly carbon dioxide, in the atmosphere has sparked a great deal of interest in the removal of CO{sub 2} from flue gases of fossil fueled plants. Presently, several techniques for the removal of CO{sub 2} are considered to have potential, but are lacking in practicality. For example, amine scrubbing of flue gas streams is potential, but are lacking in practically. For example, amine scrubbing of flue gas streams is effective in removing CO{sub 2}, but costs are high; efficiency suffers; and other acid gases must be removed prior to amine stripping. Membrane systems for CO{sub 2} removal are held in high regard, and inorganic, particularly ceramic, membranes offer the potential for high temperature, thus energy saving, removal.

PRECOMBUSTION REMOVAL OF HAZARDOUS AIR POLLUTANT PRECURSORS

Energy Technology Data Exchange (ETDEWEB)

Unknown

2000-10-09

In response to growing environmental concerns reflected in the 1990 Clean Air Act Amendment (CAAA), the United States Department of Energy (DOE) sponsored several research and development projects in late 1995 as part of an initiative entitled Advanced Environmental Control Technologies for Coal-Based Power Systems. The program provided cost-shared support for research and development projects that could accelerate the commercialization of affordable, high-efficiency, low-emission, coal-fueled electric generating technologies. Clean coal technologies developed under this program would serve as prototypes for later generations of technologies to be implemented in the industrial sector. In order to identify technologies with the greatest potential for commercial implementation, projects funded under Phase I of this program were subject to competitive review by DOE before being considered for continuation funding under Phase II. One of the primary topical areas identified under the DOE initiative relates to the development of improved technologies for reducing the emissions of air toxics. Previous studies have suggested that many of the potentially hazardous air pollutant precursors (HAPPs) occur as trace elements in the mineral matter of run-of-mine coals. As a result, these elements have the potential to be removed prior to combustion at the mine site by physical coal cleaning processes (i.e., coal preparation). Unfortunately, existing coal preparation plants are generally limited in their ability to remove HAPPs due to incomplete liberation of the mineral matter and high organic associations of some trace elements. In addition, existing physical coal cleaning plants are not specifically designed or optimized to ensure that high trace element rejections may be achieved.

Molecular-level removal of proteinaceous contamination from model surfaces and biomedical device materials by air plasma treatment.

Science.gov (United States)

Banerjee, K K; Kumar, S; Bremmell, K E; Griesser, H J

2010-11-01

Established methods for cleaning and sterilising biomedical devices may achieve removal of bioburden only at the macroscopic level while leaving behind molecular levels of contamination (mainly proteinaceous). This is of particular concern if the residue might contain prions. We investigated at the molecular level the removal of model and real-life proteinaceous contamination from model and practical surfaces by air plasma (ionised air) treatment. The surface-sensitive technique of X-ray photoelectron spectroscopy (XPS) was used to assess the removal of proteinaceous contamination, with the nitrogen (N1s) photoelectron signal as its marker. Model proteinaceous contamination (bovine serum albumin) adsorbed on to a model surface (silicon wafer) and the residual proteinaceous contamination resulting from incubating surgical stainless steel (a practical biomaterial) in whole human blood exhibited strong N1s signals [16.8 and 18.5 atomic percent (at.%), respectively] after thorough washing. After 5min air plasma treatment, XPS detected no nitrogen on the sample surfaces, indicating complete removal of proteinaceous contamination, down to the estimated XPS detection limit 10ng/cm(2). Applying the same plasma treatment, the 7.7at.% nitrogen observed on a clinically cleaned dental bur was reduced to a level reflective of new, as-received burs. Contact angle measurements and atomic force microscopy also indicated complete molecular-level removal of the proteinaceous contamination upon air plasma treatment. This study demonstrates the effectiveness of air plasma treatment for removing proteinaceous contamination from both model and practical surfaces and offers a method for ensuring that no molecular residual contamination such as prions is transferred upon re-use of surgical and dental instruments. Crown Copyright © 2010. Published by Elsevier Ltd. All rights reserved.

Efficacy and safety of fractional carbon dioxide laser for treatment of unwanted facial freckles in phototypes II-IV: a pilot study.

Science.gov (United States)

El Zawahry, Bakr; Zaki, Naglaa; Hafez, Vanessa; Abdel Hay, Rania; Hay, Rania Abdel; Fahim, Aya

2014-11-01

Facial freckles are a cosmetic concern to Egyptians, particularly young females. Several therapeutic lines exist with variable response rates and limitations. Fractional carbon dioxide (FCO2) laser provides minimal ablation and therefore less down time and less side effects. The efficacy and safety of this laser technology have still not been studied in freckles. The aim of this study is to assess the efficacy and safety of FCO2 laser in the treatment of unwanted facial freckles in Egyptians. Twenty patients undergone a single session of FCO2 laser and then were followed up clinically a month later. Photographs were taken before treatment and at follow-up visit and were assessed by three blinded investigators. Percent of global improvement was measured on a 4-point grading scale. Patient's satisfaction and adverse events were recorded. Two patients (10 %) showed grade 1 improvement, while eight patients (40 %) showed grade 2 improvement. Nine patients (45 %) showed grade 3 improvement, and only one patient (5 %) showed grade 4 improvement. FCO2 laser resurfacing is effective and safe in treatment of facial freckles in skin phototypes II-IV. It can offer a more practical alternative to topical treatments, and a cheaper alternative to Q-switched lasers.

Uranium material removing and recovering device

International Nuclear Information System (INIS)

Takita, Shin-ichi.

1997-01-01

A uranium material removing and recovering device for use in removing surplus uranium heavy metal (UO 2 ) generated in a uranium handling facility comprises a uranium material removing device and a uranium material recovering device. The uranium material removing device comprises an adsorbing portion filled with a uranium adsorbent, a control portion for controlling the uranium adsorbent of the uranium adsorbing portion by a controlling agent, a uranium adsorbing device connected thereto and a jetting device for jetting the adsorbing liquid to equipments deposited with uranium. The recovering device comprises a recovering apparatus for recovering uranium materials deposited with the adsorbent liquid removed by the jetting device and a recovering tank for storing the recovered uranium materials. The device of the present invention can remove surplus uranium simply and safely, mitigate body's load upon removing and recovering operations, facilitate the processing for the exchange of the adsorbent and reduces the radioactive wastes. (T.M.)

Device for removing fur

International Nuclear Information System (INIS)

Hanawa, Minoru; Nakagawa, Takao; Sakuma, Toyoo; Yonemura, Eizo.

1976-01-01

Purpose: To effectively remove fur adhered to fuel rods and to increase working efficiency without use of a lengthy hose. Constitution: In the fur removing device of the present invention, brushes rotated by gears are provided within a casing so that fur adhered to the fuel rods are removed by the brushes and water is rotatably moved by blades housed therein to outwardly blow fur floating in water by means of a centrifugal force. Then, the fur is filtered by a filter outwardly provided. In this way, the fur may be collected within the device to avoid contamination to others. (Kamimura, M.)

Using a Spectral Method to Evaluate Hyporheic Exchange and its Effect on Reach Scale Nitrate Removal.

Science.gov (United States)

Moren, I.; Worman, A. L. E.; Riml, J.

2017-12-01

Previous studies have shown that hyporheic exchange processes can be of great importance for the transport, retention and mass removal of nutrients in streams. Specifically, the flow of surface water through the hyporheic zone enhances redox-sensitive reactions such as coupled nitrification-denitrification. This self-cleaning capacity of streams can be utilized in stream restoration projects aiming to improve water quality by reconstructing the geomorphology of the streams. To optimize the effect of restoration actions we need quantitative understanding of the linkage between stream geomorphology, hyporheic exchange processes and the desired water quality targets. Here we propose an analytical, spectral methodology to evaluate how different stream geomorphologies induce hyporheic exchange on a wide range of spatial and temporal scales. Measurements of streambed topographies and surface water profiles from agricultural streams were used to calculate the average hyporheic exchange velocity and residence times and the result was compared with in-stream tracer test. Furthermore, the hyporheic exchange induced by steps in the surface water profile was derived as a comparison of the theoretical capacity of the system. Based on differences in hyporheic exchange, the mass removal of nitrate could be derived for the different geomorphologies. The maximum nitrate mass removal was found to be related to a specific Damkhöler number, which reflects that the mass removal can be either reaction or transport controlled. Therefore, although hyporheic exchange induced by steps in the surface water profile was generally larger than the hyporheic exchange in the observed natural reaches, this would not necessarily lead a larger nitrate mass removal provided that the hyporheic residence times are not long enough to facilitate denitrification processes. The study illustrates the importance to investigate a stream thoroughly before any remediation actions are implemented, specifically

Reflective Practices for Teacher Education

Directory of Open Access Journals (Sweden)

Paulus Kuswandono

2017-01-01

Full Text Available Studies on reflective practice in teacher education are increasingly getting more attention at least in the last 2 decades. This article discusses concepts of reflection and how it is implemented in educating pre-service teachers on their early stage of professional learning. The purposes of doing the reflection for pre-service teachers are not only for illuminating their professional learning experiences, but also to critically reflect their vocation as teachers, including the values which may be dictated to them through rigid regulations. Reflection in teacher education is crucial as it connects well with learning in that learners use reflection to exercise their mind and to evaluate their learning experiences. Besides, this article also highlights some perceived difficulties to implement reflective practice, as well as ways how to promote reflection.   DOI: https://doi.org/10.24071/llt.2012.150102

Catheter based mid-infrared reflectance and reflectance generated absorption spectroscopy

Science.gov (United States)

Holman, Hoi-Ying N

2013-10-29

A method of characterizing conditions in a tissue, by (a) providing a catheter that has a light source that emits light in selected wavenumbers within the range of mid-IR spectrum; (b) directing the light from the catheter to an area of tissue at a location inside a blood vessel of a subject; (c) collecting light reflected from the location and generating a reflectance spectra; and (d) comparing the reflectance spectra to a reference spectra of normal tissue, whereby a location having an increased number of absorbance peaks at said selected wavenumbers indicates a tissue inside the blood vessel containing a physiological marker for atherosclerosis.

Studies of the Reflection, Refraction and Internal Reflection of Light

Science.gov (United States)

Lanchester, P. C.

2014-01-01

An inexpensive apparatus and associated experiments are described for studying the basic laws of reflection and refraction of light at an air-glass interface, and multiple internal reflections within a glass block. In order to motivate students and encourage their active participation, a novel technique is described for determining the refractive…

Self-rumination, self-reflection, and depression: self-rumination counteracts the adaptive effect of self-reflection.

Science.gov (United States)

Takano, Keisuke; Tanno, Yoshihiko

2009-03-01

Self-focused attention has adaptive and maladaptive aspects: self-reflection and self-rumination [Trapnell, P. D., & Campbell, J. D. (1999). Private self-consciousness and the Five-Factor Model of personality: distinguishing rumination from reflection. Journal of Personality and Social Psychology, 76, 284-304]. Although reflection is thought to be associated with problem solving and the promotion of mental health, previous researches have shown that reflection does not always have an adaptive effect on depression. Authors have examined the causes behind this inconsistency by modeling the relationships among self-reflection, self-rumination, and depression. One hundred and eleven undergraduates (91 men and 20 women) participated in a two-time point assessment with a 3-week interval. Statistical analysis with structural equation modeling showed that self-reflection significantly predicted self-rumination, whereas self-rumination did not predict self-reflection. With regard to depression, self-reflection was associated with a lower level of depression; self-rumination, with a higher level of depression. The total effect of self-reflection on depression was almost zero. This result indicates that self-reflection per se has an adaptive effect, which is canceled out by the maladaptive effect of self-rumination, because reflectors are likely to ruminate and reflect simultaneously.

Atlas of Illustrative Cases of Tattoo Complications

DEFF Research Database (Denmark)

Serup, Jørgen

2017-01-01

proposed Bispebjerg University Hospital ('Tattoo Clinic') diagnostic system of tattoo complications, a system reported to the 11th revision of the WHO disease classification system. Cases include allergies predominantly seen in red tattoos manifesting the characteristic patterns of plaque elevation......'. Bacterial infections are also illustrated. The technical hazards of tattooing and sequels as well as unwanted effects of tattoo removal by lasers are shown along with severe scarring following tattoo removal by caustics. This atlas is a tutorial in modern medical and surgical treatments of tattoo...

The separation of sulphur-35 and phosphorus-32 from urine and their subsequent estimation

International Nuclear Information System (INIS)

Kramer, G.H.

1981-07-01

A method has been developed that will specifically separate sulphur-35 and phosphorus-32 from urine. Interfering cations are removed by cation exchange and differential precipitation is used to remove the unwanted anion(s). The anion of interest is estimated by liquid scintillation counting and recoveries are 95% for sulphur-35 and 70% for phosphorus-32. The detection limits for sulphur-35 and phosphorus-32 are estimated to be 1.5 pCi and 1.3 pCi, respectively (1 pCi = 37 mBq)

Optimized simultaneous inversion of primary and multiple reflections; Inversion linearisee simultanee des reflexions primaires et des reflexions multiples

Energy Technology Data Exchange (ETDEWEB)

Pelle, L.

2003-12-01

The removal of multiple reflections remains a real problem in seismic imaging. Many preprocessing methods have been developed to attenuate multiples in seismic data but none of them is satisfactory in 3D. The objective of this thesis is to develop a new method to remove multiples, extensible in 3D. Contrary to the existing methods, our approach is not a preprocessing step: we directly include the multiple removal in the imaging process by means of a simultaneous inversion of primaries and multiples. We then propose to improve the standard linearized inversion so as to make it insensitive to the presence of multiples in the data. We exploit kinematics differences between primaries and multiples. We propose to pick in the data the kinematics of the multiples we want to remove. The wave field is decomposed into primaries and multiples. Primaries are modeled by the Ray+Born operator from perturbations of the logarithm of impedance, given the velocity field. Multiples are modeled by the Transport operator from an initial trace, given the picking. The inverse problem simultaneously fits primaries and multiples to the data. To solve this problem with two unknowns, we take advantage of the isometric nature of the Transport operator, which allows to drastically reduce the CPU time: this simultaneous inversion is this almost as fast as the standard linearized inversion. This gain of time opens the way to different applications to multiple removal and in particular, allows to foresee the straightforward 3D extension. (author)

Automated Processing Workflow for Ambient Seismic Recordings

Science.gov (United States)

Girard, A. J.; Shragge, J.

2017-12-01

Structural imaging using body-wave energy present in ambient seismic data remains a challenging task, largely because these wave modes are commonly much weaker than surface wave energy. In a number of situations body-wave energy has been extracted successfully; however, (nearly) all successful body-wave extraction and imaging approaches have focused on cross-correlation processing. While this is useful for interferometric purposes, it can also lead to the inclusion of unwanted noise events that dominate the resulting stack, leaving body-wave energy overpowered by the coherent noise. Conversely, wave-equation imaging can be applied directly on non-correlated ambient data that has been preprocessed to mitigate unwanted energy (i.e., surface waves, burst-like and electromechanical noise) to enhance body-wave arrivals. Following this approach, though, requires a significant preprocessing effort on often Terabytes of ambient seismic data, which is expensive and requires automation to be a feasible approach. In this work we outline an automated processing workflow designed to optimize body wave energy from an ambient seismic data set acquired on a large-N array at a mine site near Lalor Lake, Manitoba, Canada. We show that processing ambient seismic data in the recording domain, rather than the cross-correlation domain, allows us to mitigate energy that is inappropriate for body-wave imaging. We first develop a method for window selection that automatically identifies and removes data contaminated by coherent high-energy bursts. We then apply time- and frequency-domain debursting techniques to mitigate the effects of remaining strong amplitude and/or monochromatic energy without severely degrading the overall waveforms. After each processing step we implement a QC check to investigate improvements in the convergence rates - and the emergence of reflection events - in the cross-correlation plus stack waveforms over hour-long windows. Overall, the QC analyses suggest that

TMI-2 reactor vessel head removal

International Nuclear Information System (INIS)

Bengel, P.R.; Smith, M.D.; Estabrook, G.A.

1984-12-01

This report describes the safe removal and storage of the Three Mile Island Unit 2 reactor vessel head. The head was removed in July 1984 to permit the removal of the plenum and the reactor core, which were damaged during the 1979 accident. From July 1982, plans and preparations were made using a standard head removal procedure modified by the necessary precautions and changes to account for conditions caused by the accident. After data acquisition, equipment and structure modifications, and training the head was safely removed and stored and the internals indexing fixture and a work platform were installed on top of the vessel. Dose rates during and after the operation were lower than expected; lessons were learned from the operation which will be applied to the continuing fuel removal operations activities

TMI-2 reactor vessel head removal

International Nuclear Information System (INIS)

Bengel, P.R.; Smith, M.D.; Estabrook, G.A.

1985-09-01

This report describes the safe removal and storage of the Three Mile Island Unit 2 (TMI-2) reactor vessel head. The head was removed in July 1984 to permit the removal of the plenum and the reactor core, which were damaged during the 1979 accident. From July 1982, plans and preparations were made using a standard head removal procedure modified by the necessary precautions and changes to account for conditions caused by the accident. After data acquisition, equipment and structure modifications, and training, the head was safely removed and stored; and the internals indexing fixture and a work platform were installed on top of the vessel. Dose rates during and after the operation were lower than expected; lessons were learned from the operation which will be applied to the continuing fuel removal operations activities

Born reflection kernel analysis and wave-equation reflection traveltime inversion in elastic media

KAUST Repository

Wang, Tengfei

2017-08-17

Elastic reflection waveform inversion (ERWI) utilize the reflections to update the low and intermediate wavenumbers in the deeper part of model. However, ERWI suffers from the cycle-skipping problem due to the objective function of waveform residual. Since traveltime information relates to the background model more linearly, we use the traveltime residuals as objective function to update background velocity model using wave equation reflected traveltime inversion (WERTI). The reflection kernel analysis shows that mode decomposition can suppress the artifacts in gradient calculation. We design a two-step inversion strategy, in which PP reflections are firstly used to invert P wave velocity (Vp), followed by S wave velocity (Vs) inversion with PS reflections. P/S separation of multi-component seismograms and spatial wave mode decomposition can reduce the nonlinearity of inversion effectively by selecting suitable P or S wave subsets for hierarchical inversion. Numerical example of Sigsbee2A model validates the effectiveness of the algorithms and strategies for elastic WERTI (E-WERTI).

Principles of neutron reflection

International Nuclear Information System (INIS)

Felcher, G.P.

1988-08-01

Neutron reflection is perhaps the most developed branch of slow neutrons optics, which in itself is a direct consequence of the undulatory nature of the neutron. After reviewing the basic types of interactions (nuclear and magnetic) between neutrons and matter, the formalism is introduced to calculate the reflectivity from a sample composed of stacked flat layers and, inversely, to calculate the stacking from reflectivity measurements. Finally, a brief survey of the applications of neutron reflection is given, both in technology and in fundamental research. 32 refs., 6 figs

Storage array reflection considerations

International Nuclear Information System (INIS)

Haire, M.J.; Jordan, W.C.; Taylor, R.G.

1997-01-01

The assumptions used for reflection conditions of single containers are fairly well established and consistently applied throughout the industry in nuclear criticality safety evaluations. Containers are usually considered to be either fully water-reflected (i.e. surrounded by 6 to 12 in. of water) for safety calculations or reflected by 1 in. of water for nominal (structural material and air) conditions. Tables and figures are usually available for performing comparative evaluations of containers under various loading conditions. Reflection considerations used for evaluating the safety of storage arrays of fissile material are not as well established

Bisphenol A Removal by Submerged Macrophytes and the Contribution of Epiphytic Microorganisms to the Removal Process.

Science.gov (United States)

Zhang, Guosen; Wang, Yu; Jiang, Jinhui; Yang, Shao

2017-06-01

Bisphenol A (BPA), a typical endocrine disruptor, has been found in global aquatic environments, causing great concern. The capabilities of five common submerged macrophytes to remove BPA from water and the contributions of epiphytic microorganisms were investigated. Macrophytes removed 62%-100% of total BPA (5 mg/L) over 12 days; much higher rates than that observed in the control (2%, F = 261.511, p = 0.000). Ceratophyllum demersum was the most efficient species. C. demersum samples from lakes with different water qualities showed no significant differences in BPA removal rates. Moreover, removal, inhibition or re-colonization of epiphytic microorganisms did not significantly change the BPA removal rates of C. demersum. Therefore, the contributions of epiphytic microorganisms to the BPA removal process were negligible. The rate of BPA accumulation in C. demersum was 0.1%, indicating that BPA was mainly biodegraded by the macrophyte. Hence, submerged macrophytes, rather than epiphytic microorganisms, substantially contribute to the biodegradation of BPA in water.

Thoughts on Reflection (Editorial

Directory of Open Access Journals (Sweden)

Denise Koufogiannakis

2010-06-01

Full Text Available There has been some acknowledgement in the published literature that reflection is a crucial element of the evidence based library and information practice (EBLIP model we have adopted (Booth 2004, 2006; Grant 2007; Helliwell 2007. As we work through a problem and try to incorporate the best available evidence into our decision making, reflection is required at several stages, including the very identification of the problem through to our assessment of the process itself and what we have learned in order to inform future practice. However, reflection and reflective writing have not fully been integrated into the process we espouse, and very little has been done to look more closely at this element of the model and how it can be integrated into professional learning.In a recently published research article, Sen (2010 confirms the relationship between reflection and several aspects of professional practice. These include critical review and decision making, two aspects that are tied closely to the evidence based process. Sen notes: Students were more likely to show evidence of learning, self‐development, the ability to review issues crucially, awareness of their own mental functions, ability to make decision [sic] and being empowered when they had mastered the art of reflective practice and the more deeply analytical reflective writing. (p.84 EBLIP (the journal tries to incorporate elements of reflection within the articles we publish. While we clearly believe in the need for our profession to do quality research and publish that research so that it can be accessible to practitioners, we also know that research cannot be looked at in isolation. Our evidence summaries are one way of reflecting critically on previously published research, and in the same vein, our classics bring older research studies back to the foreground. This work needs to continue to be discussed and looked at for its impact on our profession.More directly, the Using

Preliminary review of critical shutdown heat removal items for common cause failure susceptibility on LMFBR's. [LMFBR

Energy Technology Data Exchange (ETDEWEB)

Allard, L.T.; Elerath, J.G.

1976-02-01

This document presents a common cause failure analysis for Critical LMFBR Shutdown Heat Removal Systems. The report is intended to outline a systematic approach to defining areas with significant potential for common causes of failure, and ultimately provide inputs to the reliability prediction model. A preliminary evaluation of postulatd single initiating causes resulting in multiple failures of LMFBR-SHRS items is presented in Appendix C. This document will be periodically updated to reflect new information and activity.

The Reflective Foundation

DEFF Research Database (Denmark)

Lunde Jørgensen, Ida

Private foundations and cultural philanthropy by élites is viewed with increasing skepticism in recent years, begging the question of the extent to which foundations reflect on their role vis a vis wider societal norms. Through the prism of the New Carlsberg Foundation, financed by the brewery...... Carlsberg A/S, the paper seeks to elucidate the way in which one culturally significant foundation from Denmark has reflected on - and legitimated - its work and investments at critical moments in the past decades. The paper indicates a foundation with a high degree of reflection on the wider societal...

Integral staggered point-matching method for millimeter-wave reflective diffraction gratings on electron cyclotron heating systems

International Nuclear Information System (INIS)

Xia, Donghui; Huang, Mei; Wang, Zhijiang; Zhang, Feng; Zhuang, Ge

2016-01-01

Highlights: • The integral staggered point-matching method for design of polarizers on the ECH systems is presented. • The availability of the integral staggered point-matching method is checked by numerical calculations. • Two polarizers are designed with the integral staggered point-matching method and the experimental results are given. - Abstract: The reflective diffraction gratings are widely used in the high power electron cyclotron heating systems for polarization strategy. This paper presents a method which we call “the integral staggered point-matching method” for design of reflective diffraction gratings. This method is based on the integral point-matching method. However, it effectively removes the convergence problems and tedious calculations of the integral point-matching method, making it easier to be used for a beginner. A code is developed based on this method. The calculation results of the integral staggered point-matching method are compared with the integral point-matching method, the coordinate transformation method and the low power measurement results. It indicates that the integral staggered point-matching method can be used as an optional method for the design of reflective diffraction gratings in electron cyclotron heating systems.

Integral staggered point-matching method for millimeter-wave reflective diffraction gratings on electron cyclotron heating systems

Energy Technology Data Exchange (ETDEWEB)

Xia, Donghui [State Key Laboratory of Advanced Electromagnetic Engineering and Technology, Huazhong University of Science and Technology, 430074 Wuhan (China); Huang, Mei [Southwestern Institute of Physics, 610041 Chengdu (China); Wang, Zhijiang, E-mail: wangzj@hust.edu.cn [State Key Laboratory of Advanced Electromagnetic Engineering and Technology, Huazhong University of Science and Technology, 430074 Wuhan (China); Zhang, Feng [Southwestern Institute of Physics, 610041 Chengdu (China); Zhuang, Ge [State Key Laboratory of Advanced Electromagnetic Engineering and Technology, Huazhong University of Science and Technology, 430074 Wuhan (China)

2016-10-15

Highlights: • The integral staggered point-matching method for design of polarizers on the ECH systems is presented. • The availability of the integral staggered point-matching method is checked by numerical calculations. • Two polarizers are designed with the integral staggered point-matching method and the experimental results are given. - Abstract: The reflective diffraction gratings are widely used in the high power electron cyclotron heating systems for polarization strategy. This paper presents a method which we call “the integral staggered point-matching method” for design of reflective diffraction gratings. This method is based on the integral point-matching method. However, it effectively removes the convergence problems and tedious calculations of the integral point-matching method, making it easier to be used for a beginner. A code is developed based on this method. The calculation results of the integral staggered point-matching method are compared with the integral point-matching method, the coordinate transformation method and the low power measurement results. It indicates that the integral staggered point-matching method can be used as an optional method for the design of reflective diffraction gratings in electron cyclotron heating systems.

Tattoo removal with ingenol mebutate.

Science.gov (United States)

Cozzi, Sarah-Jane; Le, Thuy T; Ogbourne, Steven M; James, Cini; Suhrbier, Andreas

2017-01-01

An increasing number of people are getting tattoos; however, many regret the decision and seek their removal. Lasers are currently the most commonly used method for tattoo removal; however, treatment can be lengthy, costly, and sometimes ineffective, especially for certain colors. Ingenol mebutate is a licensed topical treatment for actinic keratoses. Here, we demonstrate that two applications of 0.1% ingenol mebutate can efficiently and consistently remove 2-week-old tattoos from SKH/hr hairless mice. Treatment was associated with relocation of tattoo microspheres from the dermis into the posttreatment eschar. The skin lesion resolved about 20 days after treatment initiation, with some cicatrix formation evident. The implications for using ingenol mebutate for tattoo removal in humans are discussed.

Removal of root filling materials.

LENUS (Irish Health Repository)

Duncan, H.F. Chong, B.S.

2011-05-01

Safe, successful and effective removal of root filling materials is an integral component of non-surgical root canal re-treatment. Access to the root canal system must be achieved in order to negotiate to the canal terminus so that deficiencies in the original treatment can be rectified. Since a range of materials have been advocated for filling root canals, different techniques are required for their removal. The management of commonly encountered root filling materials during non-surgical re-treatment, including the clinical procedures necessary for removal and the associated risks, are reviewed. As gutta-percha is the most widely used and accepted root filling material, there is a greater emphasis on its removal in this review.

Engineering a segmented dual-reservoir polyurethane intravaginal ring for simultaneous prevention of HIV transmission and unwanted pregnancy.

Directory of Open Access Journals (Sweden)

Justin T Clark

Full Text Available The HIV/AIDS pandemic and its impact on women prompt the investigation of prevention strategies to interrupt sexual transmission of HIV. Long-acting drug delivery systems that simultaneously protect womenfrom sexual transmission of HIV and unwanted pregnancy could be important tools in combating the pandemic. We describe the design, in silico, in vitro and in vivo evaluation of a dual-reservoir intravaginal ring that delivers the HIV-1 reverse transcriptase inhibitor tenofovir and the contraceptive levonorgestrel for 90 days. Two polyether urethanes with two different hard segment volume fractions were used to make coaxial extruded reservoir segments with a 100 µm thick rate controlling membrane and a diameter of 5.5 mm that contain 1.3 wt% levonorgestrel. A new mechanistic diffusion model accurately described the levonorgestrel burst release in early time points and pseudo-steady state behavior at later time points. As previously described, tenofovir was formulated as a glycerol paste and filled into a hydrophilic polyurethane, hollow tube reservoir that was melt-sealed by induction welding. These tenofovir-eluting segments and 2 cm long coaxially extruded levonorgestrel eluting segments were joined by induction welding to form rings that released an average of 7.5 mg tenofovir and 21 µg levonorgestrel per day in vitro for 90 days. Levonorgestrel segments placed intravaginally in rabbits resulted in sustained, dose-dependent levels of levonorgestrel in plasma and cervical tissue for 90 days. Polyurethane caps placed between segments successfully prevented diffusion of levonorgestrel into the tenofovir-releasing segment during storage.Hydrated rings endured between 152 N and 354 N tensile load before failure during uniaxial extension testing. In summary, this system represents a significant advance in vaginal drug delivery technology, and is the first in a new class of long-acting multipurpose prevention drug delivery systems.

Using Ghost Reflections Rather than Removing Them

NARCIS (Netherlands)

Blacquiere, G.; Berkhout, A.J.

2015-01-01

In marine acquisition both a direct wavefield and a ghost wavefield are produced as well as recorded. Hence, the seismic data can be considered to be a natural blend of four wavefields related to the real sources, ghost sources, real detectors and ghost detectors respectively. We consider deghosting

New tattoo approaches in dermatology.

Science.gov (United States)

Luebberding, Stefanie; Alexiades-Armenakas, Macrene

2014-01-01

Tattoos have fascinated mankind for centuries. Although these body marks were once considered to be permanent, technical and scientific progress in recent years has made it possible to remove tattoos by various treatment modalities. Contemporary technology involves the use of nonablative quality-switched lasers, which are considered to be the gold-standard treatment option for the removal of unwanted tattoo ink. Current research in the field of tattoo removal is focused on faster lasers and more effective targeting of tattoo pigment particles including picosecond laser devices, multi-pass treatments, dermal scatter reduction, application of imiquimod, and the use of microencapsulated tattoo ink. Copyright © 2014 Elsevier Inc. All rights reserved.

Reflection-type hologram for atoms

International Nuclear Information System (INIS)

Shimizu, Fujio; Fujita, Jun-ichi

2002-01-01

A cold metastable neon atomic beam was manipulated with a reflective amplitude hologram that was encoded on a silicon surface. A black-and-white pattern of atoms was reconstructed on a microchannel plate detector. The hologram used the enhanced quantum reflection developed by authors and was made of a two-dimensional array of rectangular low and high reflective cells. The surface of the high reflective cell was composed of regularly spaced roof-shaped ridges, while the low reflective cell was simply a flat surface. The hologram was the first demonstration of reflective atom-optical elements that used universal interaction between a neutral atom and solid surface

Reflective journal writing: how it promotes reflective thinking in clinical nursing education: a students' perspective.

Science.gov (United States)

Kok, J; Chabeli, M M

2002-08-01

According to the outcomes-based education and training system of education (OBET) in the country and the South African Nursing Council, education should focus on "creating" reflective learners and practitioners. This article seeks to determine the effectiveness of reflective journal writing in promoting the reflective thinking of learners in clinical nursing education and to validate the guidelines described in a bigger study on how to facilitate reflective thinking using reflective journal writing. A qualitative, contextual, explorative, descriptive research design was used to determine the learners' perceptions on whether reflective journal writing did promote their higher-level thinking skills during the six-month placement in a psychiatric clinical practice using the reflective diaries. From a population of seventeen fourth-year students, six volunteered to participate in a focus group interview. The data was analysed by means of the descriptive method of open coding of Tesch (in Creswell, 1994:154-156). Positive and negative results from the perceptions of the participants and a literature review served as a basis for deducing and describing guidelines for the effective use of reflective journal writing in promoting reflective thinking in clinical nursing education. The positive perception was the development of problem-solving skills attained through reflection by using analytical critical thinking, synthesis and the evaluation of situations. Self-evaluation leading to intellectual growth and self-awareness indicated a positive perception. Negative perceptions were that reflective journal writing is time consuming, content based with a lack of clear expectations from the teacher, and distrust of students about the information written. Guba's model of ensuring trustworthiness in qualitative research as described in Krefting (1991:215-222) was employed. It is concluded that reflective journal writing in clinical nursing education does promote reflective

Storage array reflection considerations

International Nuclear Information System (INIS)

Haire, M.J.; Jordan, W.C.; Taylor, R.G.

1997-01-01

The assumptions used for reflection conditions of single containers are fairly well established and consistently applied throughout the industry in nuclear criticality safety evaluations. Containers are usually considered to be either fully water reflected (i.e., surrounded by 6 to 12 in. of water) for safety calculations or reflected by 1 in. of water for nominal (structural material and air) conditions. Tables and figures are usually available for performing comparative evaluations of containers under various loading conditions. Reflection considerations used for evaluating the safety of storage arrays of fissile material are not as well established. When evaluating arrays, it has become more common for analysts to use calculations to demonstrate the safety of the array configuration. In performing these calculations, the analyst has considerable freedom concerning the assumptions made for modeling the reflection of the array. Considerations are given for the physical layout of the array with little or no discussion (or demonstration) of what conditions are bounded by the assumed reflection conditions. For example, an array may be generically evaluated by placing it in a corner of a room in which the opposing walls are far away. Typically, it is believed that complete flooding of the room is incredible, so the array is evaluated for various levels of water mist interspersed among array containers. This paper discusses some assumptions that are made regarding storage array reflection

Ultrasonic Abrasive Removal Of EDM Recast

Science.gov (United States)

Mandel, Johnny L.; Jacobson, Marlowe S.

1990-01-01

Ultrasonic abrasive process removes layer of recast material generated during electrical-discharge machining (EDM) of damper pocket on turbine blade. Form-fitted tool vibrated ultrasonically in damper pocket from which material removed. Vibrations activate abrasive in pocket. Amount of material removed controlled precisely.

Removable bearing arrangement for a wind turbine generator

Science.gov (United States)

Bagepalli, Bharat Sampathkumaran; Jansen, Patrick Lee; Gadre, Aniruddha Dattatraya

2010-06-15

A wind generator having removable change-out bearings includes a rotor and a stator, locking bolts configured to lock the rotor and stator, a removable bearing sub-assembly having at least one shrunk-on bearing installed, and removable mounting bolts configured to engage the bearing sub-assembly and to allow the removable bearing sub-assembly to be removed when the removable mounting bolts are removed.

The Economics of Carbon Dioxide Removal: The Case against Free Disposal

Science.gov (United States)

Keller, D. P.; Rickels, W.; Quaas, M.; Oschlies, A.; Reith, F.

2016-12-01

Facing the challenge to keep the average global temperature increase below 2°C and to limit long-term climate change, removing carbon dioxide from the atmosphere (Carbon Dioxide Removal, CDR) and disposing of it in non-atmospheric carbon reservoirs is becoming increasingly necessary. The social cost of removing carbon into the terrestrial biosphere (e.g. by afforestation) or the ocean (e.g. by spreading olivine in coastal areas) arises from carbon-cycle feedbacks and saturation effects. Yet they are ignored in existing economic studies on CDR. Neglecting non-atmospheric social cost results in inconsistent estimates with regard to the share and timing of CDR measures in climate policy. Here, we use an intermediate-complexity earth system model, the University of Victoria (UVic) model, to calibrate a dynamic economic model, capturing the temperature feedback and saturation effect of terrestrial carbon uptake and the saturation effect of oceanic carbon uptake to obtain an improved understanding of the net social carbon value of terrestrial and oceanic CDR. We show that planning horizons beyond the year 2100 are required to properly reflect long-term scarcity issues of non-atmospheric carbon reservoirs in current carbon prices and that neglecting non-atmospheric social cost results in too low abatement efforts and in turn in too large and earlier application of CDR measures than if applied optimally. The figure shows the carbon prices for the different carbon reservoirs in the year 2100 in dependence of the planning horizon (for a climate policy aiming to limit global mean temperature increase to 2°C). The difference between the atmospheric and the non-atmospheric carbon prices indicates the benefits of the different CDR options.

Reflectance Modeling

Science.gov (United States)

Smith, J. A.; Cooper, K.; Randolph, M.

1984-01-01

A classical description of the one dimensional radiative transfer treatment of vegetation canopies was completed and the results were tested against measured prairie (blue grama) and agricultural canopies (soybean). Phase functions are calculated in terms of directly measurable biophysical characteristics of the canopy medium. While the phase functions tend to exhibit backscattering anisotropy, their exact behavior is somewhat more complex and wavelength dependent. A Monte Carlo model was developed that treats soil surfaces with large periodic variations in three dimensions. A photon-ray tracing technology is used. Currently, the rough soil surface is described by analytic functions and appropriate geometric calculations performed. A bidirectional reflectance distribution function is calculated and, hence, available for other atmospheric or canopy reflectance models as a lower boundary condition. This technique is used together with an adding model to calculate several cases where Lambertian leaves possessing anisotropic leaf angle distributions yield non-Lambertian reflectance; similar behavior is exhibited for simulated soil surfaces.

Heavy metal removal from produced water using retorted shale; Remocao de metais pesados em aguas produzidas utilizando xisto retortado

Energy Technology Data Exchange (ETDEWEB)

Pimentel, Patricia M.; Melo, Marcos A.F.; Melo, Dulce M.A.; Silva Junior, Carlos N.; Assuncao, Ary L.C. [Universidade Federal do Rio Grande do Norte (UFRN), Natal, RN (Brazil); Anjos, Marcelino J. [Universidade Federal, Rio de Janeiro, RJ (Brazil). Coordenacao dos Programas de Pos-graduacao de Engenharia

2004-07-01

The Production of oil and gas is usually accompanied by the production of large volume of water that can have significant environmental effects if not properly treated. In this work, the use of retort shale was investigated as adsorbent agent to remove heavy metals in produced water. Batch adsorption studies in synthetic solution were performed for several metal ions. The efficiency removal was controlled by solution pH, adsorbent dosage, and initial ion concentration and agitation times. Two simple kinetic models were used, pseudo-first- and second-order, were tested to investigate the adsorption mechanisms. The equilibrium data fitted well with Langmuir and Freundlich models. The produced water samples were treated by retorted shale under optimum adsorption conditions. Synchrotron radiation total reflection X-ray fluorescence was used to analyze the elements present in produced water samples from oil field in Rio Grande do Norte, Brazil. The removal was found to be approximately 20-50% for Co, Ni, Sr and above 80% for Cr, Ba, Hg and Pb. (author)

Reflection Revisited: The Class Collage

Science.gov (United States)

Sommers, Jeff

2011-01-01

Through the regular use of what Donald Schon has termed reflection-in-action and reflection-on-action, students can learn to improve their "reflection-in-presentation," in Kathleen Blake Yancey's term. Students are often asked to do this type of reflection-in-presentation as a capstone to first-year or basic writing courses. However, a number of…

Tattoo removal with ingenol mebutate

Science.gov (United States)

Cozzi, Sarah-Jane; Le, Thuy T; Ogbourne, Steven M; James, Cini; Suhrbier, Andreas

2017-01-01

An increasing number of people are getting tattoos; however, many regret the decision and seek their removal. Lasers are currently the most commonly used method for tattoo removal; however, treatment can be lengthy, costly, and sometimes ineffective, especially for certain colors. Ingenol mebutate is a licensed topical treatment for actinic keratoses. Here, we demonstrate that two applications of 0.1% ingenol mebutate can efficiently and consistently remove 2-week-old tattoos from SKH/hr hairless mice. Treatment was associated with relocation of tattoo microspheres from the dermis into the posttreatment eschar. The skin lesion resolved about 20 days after treatment initiation, with some cicatrix formation evident. The implications for using ingenol mebutate for tattoo removal in humans are discussed. PMID:28579816

RECEIVING UNWANTED EMAIL?

CERN Multimedia

Denise Heagerty

2002-01-01

Unsolicited email, commonly known as SPAM, is a growing problem across the Internet at large. You are recommended to delete it. If the email looks suspicious, do not even open it (from Outlook you can delete email using the right button of your mouse to select the message and then selecting delete). Viruses are often hidden inside attachments, so do not open attachments in unsolicited email. SPAM and virus emails can be disguised to trick you into reading the email and/or performing an action. Here are examples of some techniques to help you recognise them: fake email addresses: emails can appear to be from people you know or even from yourself. Your own email address can appear in emails which you did not send, resulting in non-delivery messages or unexpected replies. Fake addresses may be used to send viruses. If the email looks suspicious then delete it and do not open the attachments. If you are unsure then check with the sender first. enticing subjects: the email subject uses words to make you curious...

Reflection: A Socratic approach.

Science.gov (United States)

Van Seggelen-Damen, Inge C M; Van Hezewijk, René; Helsdingen, Anne S; Wopereis, Iwan G J H

2017-12-01

Reflection is a fuzzy concept. In this article we reveal the paradoxes involved in studying the nature of reflection. Whereas some scholars emphasize its discursive nature, we go further and underline its resemblance to the self-biased dialogue Socrates had with the slave in Plato's Meno . The individual and internal nature of the reflection process creates difficulty for studying it validly and reliably. We focus on methodological issues and use Hans Linschoten's view of coupled systems to identify, analyze, and interpret empirical research on reflection. We argue that researchers and research participants can take on roles in several possible system couplings. Depending on who controls the manipulation of the stimulus, who controls the measuring instrument, who interprets the measurement and the response, different types of research questions can be answered. We conclude that reflection may be validly studied by combining different couplings of experimenter, manipulation, stimulus, participant, measurement, and response.

Arsenic removal for ceramic water filters

Directory of Open Access Journals (Sweden)

Mishant Kumar

2013-02-01

Full Text Available Arsenic in drinking water is a hazard to human health and is a known carcinogen (Mass 1992. Resource Development International – Cambodia (RDIC has researched, developed, and manufactured simple ceramic water fi lters (CWF which have proved to be extremely effective in removing pathogens from water. These fi lters however, do not remove arsenic from water, which exists in the source water at levels above the World Health Organisation (WHO guideline of 10μg/L. The aims of this literature based study were to investigate conventional and non-conventional arsenic removal processes, and to discuss the options for applying an arsenic removal technology to the CWFs produced by RDIC. It was found that conventional arsenic removal technologies are diffi cult to implement in the context of household water treatment in a developing country. This study suggested that non-conventional arsenic removal technologies shall be more effective and that field studies must be undertaken to verify the success of such methods.

Removal of heavy metals from aqueous solution by an efficient low cost biosorbent (abstract)

International Nuclear Information System (INIS)

Alam, S.; Ullah, A.

2011-01-01

The aim of this work was to assess the possibility of removing some heavy metals from water by a low-cost bio sorbent. Removal of lead and cadmium which differ in toxicity, as well as in some other characteristics were examined. Sawdust of Morus alba wood modified with 0.5N NaOH was applied as low cost bio sorbent. The sample was characterized by BET surface area, EDX, FTIR and Zeta potential technique. The removal of Cd(II) and Pb(II) by treated sawdust has been found to be concentration, contact time, adsorbate dose and temperature dependent. The adsorption parameters were determined using Freundlich, Langmuir and Tempkin isotherm models. The applicability of kinetic models i.e. pseudo first order, Elovich and parabolic diffusion has also been investigated. Thermodynamic parameters like delta H, delta S and delta G were calculated from the kinetic data. The equilibrium adsorption was achieved in 100 min. The result shows that the adsorbent examined was found to have good adsorption capacity. Surface complexation and ion exchange are the major removal mechanisms involved. The correlation coefficient for Langmuir, Freundlich and Tempkin equation were well fitted. The adsorption follows first-order kinetics. The rate of adsorption was high at high temperature. The positive values of delta S reflect some structural exchange among the active site of the adsorbent and metal ion. The negative value of Gibbs free energy (delta G) shows the spontaneous nature of the process. The findings of the data reveal that the modified Sawdust is a low-cost, easily available bio sorbent and can be use as alternative to other commercial adsorbents as well as for effluent treatment in industries. (author)

RASOR: an advanced instrument for soft x-ray reflectivity and diffraction.

Science.gov (United States)

Beale, T A W; Hase, T P A; Iida, T; Endo, K; Steadman, P; Marshall, A R; Dhesi, S S; van der Laan, G; Hatton, P D

2010-07-01

We report the design and construction of a novel soft x-ray diffractometer installed at Diamond Light Source. The beamline endstation RASOR is constructed for general users and designed primarily for the study of single crystal diffraction and thin film reflectivity. The instrument is comprised of a limited three circle (theta, 2theta, and chi) diffractometer with an additional removable rotation (phi) stage. It is equipped with a liquid helium cryostat, and post-scatter polarization analysis. Motorized motions are provided for the precise positioning of the sample onto the diffractometer center of rotation, and for positioning the center of rotation onto the x-ray beam. The functions of the instrument have been tested at Diamond Light Source, and initial test measurements are provided, demonstrating the potential of the instrument.

Applications of antireflection coatings in sonic crystal-based acoustic devices

International Nuclear Information System (INIS)

Wang Yun; Deng Ke; Xu Shengjun; Qiu Chunyin; Yang Hai; Liu Zhengyou

2011-01-01

The unwanted reflection seriously baffles the practical applications of sonic crystals, such as for various acoustic lenses designed by utilizing the in-band properties of sonic crystals. Herein we introduce the concept of the antireflection coating into the sonic crystal-based devices. The efficiency of such accessorial structures is demonstrated well by an originally high reflection system. Promising perspectives can be anticipated in extending the antireflection coating layers into more general acoustic applications through a flexible design process.

Hohlraum glint and laser pre-pulse detector for NIF experiments using velocity interferometer system for any reflector.

Science.gov (United States)

Moody, J D; Clancy, T J; Frieders, G; Celliers, P M; Ralph, J; Turnbull, D P

2014-11-01

Laser pre-pulse and early-time laser reflection from the hohlraum wall onto the capsule (termed "glint") can cause capsule imprint and unwanted early-time shocks on indirect drive implosion experiments. In a minor modification to the existing velocity interferometer system for any reflector diagnostic on NIF a fast-response vacuum photodiode was added to detect this light. The measurements show evidence of laser pre-pulse and possible light reflection off the hohlraum wall and onto the capsule.

deNOx catalysts for biomass combustion

DEFF Research Database (Denmark)

Kristensen, Steffen Buus

The present thesis revolves around the challenges involved in removal of nitrogen oxides in biomass fired power plants. Nitrogen oxides are unwanted byproducts formed to some extent during almost any combustion. In coal fired plants these byproducts are removed by selective catalytic reduction......, however the alkali in biomass complicate matters. Alkali in biomass severely deactivates the catalyst used for the selective catalytic reduction in matter of weeks, hence a more alkali resistant catalyst is needed. In the thesis a solution to the problem is presented, the nano particle deNOx catalyst...

Quality Enhancement and Nerve Fibre Layer Artefacts Removal in Retina Fundus Images by Off Axis Imaging

Energy Technology Data Exchange (ETDEWEB)

Giancardo, Luca [ORNL; Meriaudeau, Fabrice [ORNL; Karnowski, Thomas Paul [ORNL; Li, Yaquin [University of Tennessee, Knoxville (UTK); Tobin Jr, Kenneth William [ORNL; Chaum, Edward [University of Tennessee, Knoxville (UTK)

2011-01-01

Retinal fundus images acquired with non-mydriatic digital fundus cameras are a versatile tool for the diagnosis of various retinal diseases. Because of the ease of use of newer camera models and their relative low cost, these cameras are employed worldwide by retina specialists to diagnose diabetic retinopathy and other degenerative diseases. Even with relative ease of use, the images produced by these systems sometimes suffer from reflectance artefacts mainly due to the nerve fibre layer (NFL) or other camera lens related reflections. We propose a technique that employs multiple fundus images acquired from the same patient to obtain a single higher quality image without these reflectance artefacts. The removal of bright artefacts, and particularly of NFL reflectance, can have great benefits for the reduction of false positives in the detection of retinal lesions such as exudate, drusens and cotton wool spots by automatic systems or manual inspection. If enough redundant information is provided by the multiple images, this technique also compensates for a suboptimal illumination. The fundus images are acquired in straightforward but unorthodox manner, i.e. the stare point of the patient is changed between each shot but the camera is kept fixed. Between each shot, the apparent shape and position of all the retinal structures that do not exhibit isotropic reflectance (e.g. bright artefacts) change. This physical effect is exploited by our algorithm in order to extract the pixels belonging to the inner layers of the retina, hence obtaining a single artefacts-free image.

Re-thinking reflection in supervision

DEFF Research Database (Denmark)

Lystbæk, Christian Tang

The paper presents a socio-cultural perspective on supervision in professional education, which challenges the current reflective paradigm and move the debate on reflection in supervision in professional education and learning towards a recognition of context, power dynamics and ideological...... of reflective practice has been formalized by regulatory bodies as a way to develop the professionalism of both individual professional practitioners as students through continuing professional developmental processes. Consequently, reflection is often used as a `tool´ for personal and professional development...... al., 2010). This conceptual paper presents a critical, socio-cultural perspective on the current paradigm or dogma of reflective practice within supervision in professional education and learning. The purpose I to challenge the dogma and critically to analyze and move the debate on reflection...

Demystifying the reflective clinical journal

International Nuclear Information System (INIS)

Milinkovic, Danielle; Field, Nikki

2005-01-01

Student learning on clinical placement is a complex issue and cannot be defined solely by just doing things. Reflection during clinical practice is essential if the student is going to learn from the experience. Therefore it is important for educators to include as part of clinical education programs learning strategies that encourage reflection. The reflective clinical journal is an educational tool that is employed by the School of Medical Radiation Sciences at the University of Sydney to encourage reflection of undergraduate radiation therapy students whilst on clinical placement. This discussion paper explores the key concepts of reflection and the reflective clinical journal. Due to the paucity of information about this issue in radiation therapy the literature reviewed is from across all areas of the health sciences

'Combined reflectance stratigraphy' - subdivision of loess successions by diffuse reflectance spectrometry (DRS)

Science.gov (United States)

Szeberényi, Jozsef; Bradak-Hayashi, Balázs; Kiss, Klaudia; Kovács, József; Varga, György; Balázs, Réka; Szalai, Zoltán; Viczián, István

2016-04-01

The different varieties of loess (and intercalated paleosol layers) together constitute one of the most widespread terrestrial sediments, which was deposited, altered, and redeposited in the course of the changing climatic conditions of the Pleistocene. To reveal more information about Pleistocene climate cycles and/or environments the detailed lithostratigraphical subdivision and classification of the loess variations and paleosols are necessary. Beside the numerous method such as various field measurements, semi-quantitative tests and laboratory investigations, diffuse reflectance spectroscopy (DRS) is one of the well applied method on loess/paleosol sequences. Generally, DRS has been used to separate the detrital and pedogenic mineral component of the loess sections by the hematite/goethite ratio. DRS also has been applied as a joint method of various environmental magnetic investigations such as magnetic susceptibility- and isothermal remanent magnetization measurements. In our study the so-called "combined reflectance stratigraphy method" were developed. At First, complex mathematical method was applied to compare the results of the spectral reflectance measurements. One of the most preferred multivariate methods is cluster analysis. Its scope is to group and compare the loess variations and paleosol based on the similarity and common properties of their reflectance curves. In the Second, beside the basic subdivision of the profiles by the different reflectance curves of the layers, the most characteristic wavelength section of the reflectance curve was determined. This sections played the most important role during the classification of the different materials of the section. The reflectance value of individual samples, belonged to the characteristic wavelength were depicted in the function of depth and well correlated with other proxies like grain size distribution and magnetic susceptibility data. The results of the correlation showed the significance of

[Conventional retaining of removable partial dentures

NARCIS (Netherlands)

Keltjens, H.M.A.M.; Witter, D.J.; Creugers, N.H.J.

2009-01-01

Mechanical and biological criteria have to be met in retaining the metal frame of a removable partial denture. Additionally, a removable partial denture is part of the occlusal interface by the clasps and the denture teeth. With respect to mechanical aspects, all rigid parts of the removable partial

Equilibria in social belief removal [Journal article

CSIR Research Space (South Africa)

Booth, R

2010-08-01

Full Text Available removal function >i, which tells it how to remove any given sentence from its belief set. In this paper we view >i as a unary function on the set L of non- tautologous sentences, i.e., agents are never required to remove >. The result of removing 2 L... from i?s belief set is denoted by >i( ). We assume i?s initial belief set can always be recaptured from >i alone by just removing the (b) (1) (A) contradiction, i.e., i?s initial belief set is >i(?). We call any n-tuple (>i)i2A of removal functions a...

Motivation, Intentionality, and Mind Wandering: Implications for Assessments of Task-Unrelated Thought

Science.gov (United States)

Seli, Paul; Cheyne, James Allan; Xu, Mengran; Purdon, Christine; Smilek, Daniel

2015-01-01

Researchers of mind wandering frequently assume that (a) participants are motivated to do well on the tasks they are given, and (b) task-unrelated thoughts (TUTs) that occur during task performance reflect unintentional, unwanted thoughts that occur despite participants' best intentions to maintain task-focus. Given the relatively boring and…

30 CFR 75.213 - Roof support removal.

Science.gov (United States)

2010-07-01

... mining experience shall perform permanent roof support removal work. (b) Prior to the removal of... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Roof support removal. 75.213 Section 75.213... MANDATORY SAFETY STANDARDS-UNDERGROUND COAL MINES Roof Support § 75.213 Roof support removal. (a)(1) All...

Reflective optics

CERN Document Server

Korsch, Dietrich

1991-01-01

This is the first book dedicated exclusively to all-reflective imaging systems. It is a teaching tool as well as a practical design tool for anyone who specializes in optics, particularly for those interested in telescopes, infrared, and grazing-incidence systems. The first part of the book describes a unified geometric optical theory of all-reflective imaging systems (from near-normal to grazing incidence) developed from basic principles. The second part discusses correction methods and a multitude of closed-form solutions of well-corrected systems, supplemented with many conventional and unc

ChemCam passive reflectance spectroscopy of surface materials at the Curiosity landing site, Mars

Science.gov (United States)

Johnson, Jeffrey R.; Bell, J. F.; Bender, S.; Blaney, D.; Cloutis, E.; DeFlores, L.; Ehlmann, B.; Gasnault, O.; Gondet, B.; Kinch, K.; Lemmon, M.; Le Mouélic, S.; Maurice, S.; Rice, M.; Wiens, R. C.

2015-03-01

The spectrometers on the Mars Science Laboratory (MSL) ChemCam instrument were used in passive mode to record visible/near-infrared (400-840 nm) radiance from the martian surface. Using the onboard ChemCam calibration targets' housing as a reflectance standard, we developed methods to collect, calibrate, and reduce radiance observations to relative reflectance. Such measurements accurately reproduce the known reflectance spectra of other calibration targets on the rover, and represent the highest spatial resolution (0.65 mrad) and spectral sampling (rocks and soils match those from orbital observations and multispectral data from the MSL Mastcam camera. Preliminary analyses of the band depths, spectral slopes, and reflectance ratios of the more than 2000 spectra taken during the first year of MSL operations demonstrate at least six spectral classes of materials distinguished by variations in ferrous and ferric components. Initial comparisons of ChemCam spectra to laboratory spectra of minerals and Mars analog materials demonstrate similarities with palagonitic soils and indications of orthopyroxene in some dark rocks. Magnesium-rich "raised ridges" tend to exhibit distinct near-infrared slopes. The ferric absorption downturn typically found for martian materials at rocks and drill tailings, consistent with their more ferrous nature. Calcium-sulfate veins exhibit the highest relative reflectances observed, but are still relatively red owing to the effects of residual dust. Such dust is overall less prominent on rocks sampled within the "blast zone" immediately surrounding the landing site. These samples were likely affected by the landing thrusters, which partially removed the ubiquitous dust coatings. Increased dust coatings on the calibration targets during the first year of the mission were documented by the ChemCam passive measurements as well. Ongoing efforts to model and correct for this dust component should improve calibration of the relative reflectance

33 CFR 159.85 - Sewage removal.

Science.gov (United States)

2010-07-01

... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Sewage removal. 159.85 Section...) POLLUTION MARINE SANITATION DEVICES Design, Construction, and Testing § 159.85 Sewage removal. The device must be designed for efficient removal of nearly all of the liquid and solids in the sewage retention...

Atomic Oxygen Treatment Technique for Removal of Smoke Damage from Paintings

Science.gov (United States)

Rutledge, S. K.; Banks, B. A.

1997-01-01

Soot deposits that can accumulate on surfaces of a painting during a fire can be difficult to clean from some types of paintings without damaging the underlying paint layers. A non-contact technique has been developed which can remove the soot by allowing a gas containing atomic oxygen to flow over the surface and chemically react with the soot to form carbon monoxide and carbon dioxide. The reaction is limited to the surface, so the underlying paint is not touched. The process can be controlled so that the cleaning can be stopped once the paint surface is reached. This paper describes the smoke exposure and cleaning of untreated canvas, acrylic gesso, and sections of an oil painting using this technique. The samples were characterized by optical microscopy and reflectance spectroscopy.

Mapping and Assessment of PM10 and O3 Removal by Woody Vegetation at Urban and Regional Level

Directory of Open Access Journals (Sweden)

Lina Fusaro

2017-08-01

Full Text Available This study is the follow up of the URBAN-MAES pilot implemented in the framework of the EnRoute project. The study aims at mapping and assessing the process of particulate matter (PM10 and tropospheric ozone (O3 removal by various forest and shrub ecosystems. Different policy levels and environmental contexts were considered, namely the Metropolitan city of Rome and, at a wider level, the Latium region. The approach involves characterization of the main land cover and ecosystems using Sentinel-2 images, enabling a detailed assessment of Ecosystem Service (ES, and monetary valuation based on externality values. The results showed spatial variations in the pattern of PM10 and O3 removal inside the Municipality and in the more rural Latium hinterland, reflecting the spatial dynamics of the two pollutants. Evergreen species displayed higher PM10 removal efficiency, whereas deciduous species showed higher O3 absorption in both rural and urban areas. The overall pollution removal accounted for 5123 and 19,074 Mg of PM10 and O3, respectively, with a relative monetary benefit of 161 and 149 Million Euro for PM10 and O3, respectively. Our results provide spatially explicit evidence that may assist policymakers in land-oriented decisions towards improving Green Infrastructure and maximizing ES provision at different governance levels.

Removal of particulates from nuclear offgas

International Nuclear Information System (INIS)

Burchsted, C.A.

1976-01-01

Particulate removal from nuclear offgases can be broken down into three parts: pretreatment, prefiltration, and absolute filtration. Pretreatment, using conventional air cleaning devices in most cases, is sometimes required to temper the gases and remove heavy concentrations of particulate matter. Prefiltration, if required, serves primarily to protect the final filter stages from heavy dust loadings in order to extend their life. HEPA filters are the most commonly used ''absolute'' filtration devices and are always required for removal of submicrometer particulates that cannot be removed effectively by other devices

Prolapse Recurrence after Transvaginal Mesh Removal.

Science.gov (United States)

Rawlings, Tanner; Lavelle, Rebecca S; Coskun, Burhan; Alhalabi, Feras; Zimmern, Philippe E

2015-11-01

We determined the rate of pelvic organ prolapse recurrence after transvaginal mesh removal. Following institutional review board approval a longitudinally collected database of women undergoing transvaginal mesh removal for complications after transvaginal mesh placement with at least 1 year minimum followup was queried for pelvic organ prolapse recurrence. Recurrent prolapse was defined as greater than stage 1 on examination or the need for reoperation at the site of transvaginal mesh removal. Outcome measures were based on POP-Q (Pelvic Organ Prolapse Quantification System) at the last visit. Patients were grouped into 3 groups, including group 1--recurrent prolapse in the same compartment as transvaginal mesh removal, 2--persistent prolapse and 3--prolapse in a compartment different than transvaginal mesh removal. Of 73 women 52 met study inclusion criteria from 2007 to 2013, including 73% who presented with multiple indications for transvaginal mesh removal. The mean interval between insertion and removal was 45 months (range 10 to 165). Overall mean followup after transvaginal mesh removal was 30 months (range 12 to 84). In group 1 (recurrent prolapse) the rate was 15% (6 of 40 patients). Four women underwent surgery for recurrent prolapse at a mean 7 of months (range 5 to 10). Two patients elected observation. The rate of persistent prolapse (group 2) was 23% (12 of 52 patients). Three women underwent prolapse reoperation at a mean of 10 months (range 8 to 12). In group 3 (de novo/different compartment prolapse) the rate was 6% (3 of 52 patients). One woman underwent surgical repair at 52 months. At a mean 2.5-year followup 62% of patients (32 of 52) did not have recurrent or persistent prolapse after transvaginal mesh removal and 85% (44 of 52) did not undergo any further procedure for prolapse. Specifically for pelvic organ prolapse in the same compartment as transvaginal mesh removal 12% of patients had recurrence, of whom 8% underwent prolapse repair

Plasminogen activator inhibitor-1 removal using dextran sulphate columns. Evidence of PAI-1 homeostasis.

LENUS (Irish Health Repository)

Maher, Vincent M G

2009-08-01

Patients with high plasma plasminogen activator inhibitor-1 (PAI-1) antigen levels are prone to develop thrombosis. Lowering PAI-1 levels may offer a therapeutic option and help to better understand PAI-1 metabolism. We examined the effect on plasma PAI-1 levels of LDL-apheresis using dextran sulphate (DS) columns in 12 patients (9 male, 3 female, 49 +\\/- 10 years) with heterozygous familial hypercholesterolaemia and coronary artery disease. One plasma volume equivalent (2.3-4.0 l) was treated during each procedure (at flow rates of 23 +\\/- 2 ml\\/min). Lipids and PAI-1 antigen levels were measured in plasma before and immediately after 19 aphereses (once in 7 patients, twice in 3 patients and three times in 2 patients) and also at 3 and 7 days post apheresis in five of these patients and in the column eluates from 8 of these patients. DS-apheresis reduced plasma cholesterol (50 +\\/- 8%), triglyceride (45 +\\/- 27%), apolipoprotein B (59 +\\/- 10%) and PAI-1 antigen levels from 10.2 +\\/- 5.2 to 6.0 +\\/- 3.1 ng\\/ml (P = 0.005). The PAI-I changes were independent of circadian variation. PAI-I bound to the DS-columns (3.51 +\\/- 1.03 ng\\/ml filtered plasma) and the percent of filtered PAI-1 that was bound correlated inversely (r = -0.81, P < 0.02) with basal PAI-1 levels indicating a high affinity saturable binding process. In four patients, plasma PAI-1 levels post-apheresis were higher than expected based on the amount of PAI-removed by the DS columns. The difference between the expected and actual PAI-1 level post apheresis, reflecting PAI-1 secretion or extracellular redistribution, correlated inversely with basal PAI-1 levels (r = -0.83, P = 0.01). PAI-1 levels returned to baseline pre-apheresis values 7 days post apheresis. PAI-1 antigen may be removed from plasma without adverse effect, resulting temporarily in its extracellular redistribution and restoration to baseline levels over one week. PAI-1 redistribution particularly when baseline pre

Reflective Practice for Psychology Students: The Use of Reflective Journal Feedback in Higher Education

Science.gov (United States)

Bruno, Andreina; Dell'Aversana, Giuseppina

2017-01-01

Reflective journals have emerged as an effective means of monitoring and developing reflective practice in higher education, as part of a wider metacognitive strategy to transform traditional learning approaches. In addition, assessment procedures of reflective journals appear to be an important factor in enhancing commitment to learning and…

Ecological trap for Cnemidophorus ocellifer Spix 1825 (Squamata: Teiidae during removal of vegetation

Directory of Open Access Journals (Sweden)

Lucas Bezerra Brito

2012-07-01

Full Text Available http://dx.doi.org/10.5007/2175-7925.2012v25n4p303   Animals must anticipate future conditions according to current environmental clues. When habitats are rapidly modified, these signs may not reflect the actual environmental quality, leading to a decreased fitness of an individual and its population. During an activity of faunal rescue and scaring away in the coast of Rio Grande do Norte, Brazil, evidence of an ecological trap for the lizard Cnemidophorus ocellifer was observed. We suggest some actions which can minimize the impact of vegetation removal activities on lizards, such as: i better planning before proceeding with deforestation; and ii capture and release of lizards in appropriate locations.

Guided and Unguided Student Reflections

OpenAIRE

Matheson, Amanda; Wood, Laura; Franklin, Scott V.

2017-01-01

Self-reflection is important metacognitive skill, enabling students to build coherence into their learning and embed content in a broader context. While various pedagogical techniques exist to encourage student reflection, little research has examined the differences between formally guided, partially guided and unguided reflections. This study focuses on student responses to online Guided Reflection Forms (GRFs) from students in a first-semester non-physics class and, separately, a sophomore...

Effectuation And Reflection-In-Action

DEFF Research Database (Denmark)

Gertsen, Frank; Lervang, Johan-Ulrik; Maack, Karl

2013-01-01

Our main aim is to facilitate a reflective methodology for MSc thesis students in practical entrepreneurship that draws on the ideas of ‘reflection-in-action’ while simultaneously making use of the effectuation logics.......Our main aim is to facilitate a reflective methodology for MSc thesis students in practical entrepreneurship that draws on the ideas of ‘reflection-in-action’ while simultaneously making use of the effectuation logics....

Creation, Identity and Reflection

Directory of Open Access Journals (Sweden)

Alina Beatrice Cheşcă

2015-05-01

Full Text Available The paper “Creation, Identity and Reflection” approaches the identification in the “mirror” of reality with creation, in other words seeking the authors’ identity in the reflected images. Reflection means attempting to find oneself, the mirror being the main principle of creation. Many characters become interesting only when they step into the world beyond the mirror, when their faces are doubled by the other self or when their selves are returned by other characters. The narcissistic concept of the mirror, i.e. the reflection in the mirror and the representation of the mirror itself, is a recurrent one in literature, but the reflection of the self which is not the self (as it is a reflection does not necessarily appear in a mirror or in a photograph or portrait. Sometimes, the not-self is returned to the self by another person or character. As far as Oscar Wilde’s theories are concerned, the main idea is that people are interesting for their masks, not for their inner nature. What Wilde calls “inner nature” is the characters’ un-reflected self and the mask is the reflection, the self in the mirror. Some characters’ relationships develop within a fiction that they dramatically try to preserve and protect with the risk of suffering. They refuse to take off the masks which define them in the others’ minds and hearts; the narcissistic individuals (both artists and characters seek and love their own image which they project upon facts, thus creating a fictive realm.

27 CFR 25.206 - Removal of beer.

Science.gov (United States)

2010-04-01

... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Removal of beer. 25.206... OF THE TREASURY LIQUORS BEER Removals Without Payment of Tax Beer for Personal Or Family Use § 25.206 Removal of beer. Beer made under § 25.205 may be removed from the premises where made for personal or...

Guidelines for removing permanent makeup

Directory of Open Access Journals (Sweden)

C.Bettina Rümmelein

2016-09-01

Full Text Available Permanent makeup (PMU is a frequently implemented cosmetic procedure performed by beauticians. From a technical point, PMU is considered a facial tattoo. Failed procedures or a change of mind can lead to the desire for removal. The purpose of this retrospective evaluation of patients who came to the clinic with the desire to remove PMU between 2011 and 2015 was to explore the problems, side effects, and results in order to define treatment guidelines for other doctors. We evaluated 87 individual cases in total. In treatable cases, i.e. 52 out of the 87 cases, laser treatments were performed using a nanosecond Q-switched neodymium-doped yttrium aluminium garnet (Nd:YAG laser. It takes between 1-12 treatments to remove the PMU. In three cases, the colour of the PMU could not be removed by laser and remained after the treatment. In two cases, laser treatment had to be terminated due to colour changes towards the green-blue spectrum. Before PMU removal, laser test shots are urgently recommended as unforeseeable colour changes can cause severe aesthetically unpleasant results. Covered up PMU (skin colour is particularly susceptible to changes in colour. Heat-induced shrinking of the eye area can cause an ectropium. Surgical solutions also have to be taken into consideration. The use of proper eye protection with intraocular eye shields is mandatory. This article is an attempt to set up some guidelines for the treatment of PMU removal.

Recording and processing procedures for multi-channel seismic-reflection data collected in the western Ross Sea, Antarctica

Science.gov (United States)

Dadisman, Shawn V.; Ryan, Holly F.; Mann, Dennis M.

1987-01-01

During 1984, over 2300 km of multichannel seismic-reflection data were recorded by the U.S. Geological Survey in the western Ross Sea and Iselin Bank regions.  A temporary loss and sinking of the streamer led to increasing the streamer tow depth to 20 m, which resulted in some attenuation of frequencies in the 30-50 Hz range but no significant difference in resolution of the stacked data.  Severe water bottom multiples were encountered and removed by dip-filtering, weighted stacking, and severe post-NMO muting.

The application of Fe–Mn hydrous oxides based adsorbent for removing selenium species from water

KAUST Repository

Szlachta, Małgorzata

2013-02-01

In this study, the adsorptive removal of selenium(IV) and selenium(VI) from water by a newly developed ion exchange adsorbent, based on Fe(III) and Mn(III) hydrous oxides, was examined. This study was conducted to determine the influence of various operating parameters, such as initial anion concentration, contact time, adsorbent dose, pH, solution temperature, and the presence of competitive anions, on the treatment performance. The high Se(IV) adsorptive capacity of the adsorbent (up to 41.02. mg/g at pH 4) was due to its high affinity for selenite, as reflected in the fast rate of uptake (batch studies) and an efficient long-term removal (column experiments). Although adsorption of anions traditionally decreases as pH increases, the mixed adsorbent was capable of purifying large volumes of Se(IV)-containing water (at pH 7) to reach concentrations lower than 10 μg/L, which meets the European Commission standards. The presence of sulphate and carbonate did not influence Se(IV) adsorption. However, high phosphate and silicate concentrations may have decreased the removal efficiency of Se(IV). Data from the batch and column adsorption experiments were fitted with a number of approved models, which revealed the adsorption mechanism and allowed for a comparison of the results. © 2012 Elsevier B.V.

PRECOMBUSTION REMOVAL OF HAZARDOUS AIR POLLUTANT PRECURSORS; FINAL

International Nuclear Information System (INIS)

Unknown

2000-01-01

In response to growing environmental concerns reflected in the 1990 Clean Air Act Amendment (CAAA), the United States Department of Energy (DOE) sponsored several research and development projects in late 1995 as part of an initiative entitled Advanced Environmental Control Technologies for Coal-Based Power Systems. The program provided cost-shared support for research and development projects that could accelerate the commercialization of affordable, high-efficiency, low-emission, coal-fueled electric generating technologies. Clean coal technologies developed under this program would serve as prototypes for later generations of technologies to be implemented in the industrial sector. In order to identify technologies with the greatest potential for commercial implementation, projects funded under Phase I of this program were subject to competitive review by DOE before being considered for continuation funding under Phase II. One of the primary topical areas identified under the DOE initiative relates to the development of improved technologies for reducing the emissions of air toxics. Previous studies have suggested that many of the potentially hazardous air pollutant precursors (HAPPs) occur as trace elements in the mineral matter of run-of-mine coals. As a result, these elements have the potential to be removed prior to combustion at the mine site by physical coal cleaning processes (i.e., coal preparation). Unfortunately, existing coal preparation plants are generally limited in their ability to remove HAPPs due to incomplete liberation of the mineral matter and high organic associations of some trace elements. In addition, existing physical coal cleaning plants are not specifically designed or optimized to ensure that high trace element rejections may be achieved

Removal of silver nanoparticles by coagulation processes

International Nuclear Information System (INIS)

Sun, Qian; Li, Yan; Tang, Ting; Yuan, Zhihua; Yu, Chang-Ping

2013-01-01

Highlights: • This study investigated the removal of AgNP suspensions by four regular coagulants. • The optimal removal efficiencies for the four coagulants were achieved at pH 7.5. • The removal efficiency of AgNPs was affected by the natural water characteristics. • TEM and XRD showed that AgNPs or silver-containing NPs were adsorbed onto the flocs. -- Abstract: Commercial use of silver nanoparticles (AgNPs) will lead to a potential route for human exposure via potable water. Coagulation followed by sedimentation, as a conventional technique in the drinking water treatment facilities, may become an important barrier to prevent human from AgNP exposures. This study investigated the removal of AgNP suspensions by four regular coagulants. In the aluminum sulfate and ferric chloride coagulation systems, the water parameters slightly affected the AgNP removal. However, in the poly aluminum chloride and polyferric sulfate coagulation systems, the optimal removal efficiencies were achieved at pH 7.5, while higher or lower of pH could reduce the AgNP removal. Besides, the increasing natural organic matter (NOM) would reduce the AgNP removal, while Ca 2+ and suspended solids concentrations would also affect the AgNP removal. In addition, results from the transmission electron microscopy and X-ray diffraction showed AgNPs or silver-containing nanoparticles were adsorbed onto the flocs. Finally, natural water samples were used to validate AgNP removal by coagulation. This study suggests that in the case of release of AgNPs into the source water, the traditional water treatment process, coagulation/sedimentation, can remove AgNPs and minimize the silver ion concentration under the well-optimized conditions

Technetium removal: preliminary flowsheet options

International Nuclear Information System (INIS)

Eager, K.M.

1995-01-01

This document presents the results of a preliminary investigation into options for preliminary flowsheets for 99Tc removal from Hanford Site tank waste. A model is created to show the path of 99Tc through pretreatment to disposal. The Tank Waste Remediation (TWRS) flowsheet (Orme 1995) is used as a baseline. Ranges of important inputs to the model are developed, such as 99Tc inventory in the tanks and important splits through the TWRS flowsheet. Several technetium removal options are discussed along with sensitivities of the removal schemes to important model parameters

Optimum combinations of visible and near-infrared reflectances for estimating the fraction of photosynthetically available radiation absorbed by plants

Science.gov (United States)

Podaire, Alain; Deschamps, Pierre-Yves; Frouin, R.; Asrar, Ghassem

1991-01-01

A useful parameter to estimate terrestrial primary productivity, that can be sensed from space, is the daily averaged fraction of Photosynthetically Available Radiation (PAR) absorbed by plants. To evaluate this parameter, investigators have relied on the fact that the relative amount of radiation reflected by a vegetated surface in the visible and near infrared depends on the fraction of the surface covered by the vegetation and therefore, correlates with absorbed PAR. They have used vegetation indices, namely normalized difference and simple ratio, to derive absorbed PAR. The problem with normalized difference and simple ratio is first, they are non linear functions of radiance or reflectance and therefore, cannot be readily applied to heterogeneous targets, second, they are used in generally nonlinear relationships, which make time integrals of the indices not proportional to primary productivity, and third, the relationships depend strongly on the type of canopy and background. To remove these limitations, linear combinations of visible and near infrared reflectances at optimum (one or two) viewing zenith angles are proposed.

Removal of carbon contaminations by RF plasma generated reactive species and subsequent effects on optical surface

Energy Technology Data Exchange (ETDEWEB)

Yadav, P. K., E-mail: praveenyadav@rrcat.gov.in; Rai, S. K.; Modi, M. H.; Nayak, M.; Lodha, G. S. [Indus Synchrotron Utilization Division, Raja Ramanna Centre for Advanced Technology, Indore-452013 (India); Kumar, M.; Chakera, J. A.; Naik, P. A. [Laser Plasma Laboratory, Laser Plasma Division, Raja Ramanna Centre for Advanced Technology, Indore-452013 (India)

2015-06-24

Carbon contamination on optical elements is a serious issue in synchrotron beam lines for several decades. The basic mechanism of carbon deposition on optics and cleaning strategies are not fully understood. Carbon growth mechanism and optimized cleaning procedures are worldwide under development stage. Optimized RF plasma cleaning is considered an active remedy for the same. In present study carbon contaminated optical test surfaces (carbon capped tungsten thin film) are exposed for 30 minutes to four different gases, rf plasma at constant power and constant dynamic pressure. Structural characterization (thickness, roughness and density) of virgin samples and plasma exposed samples was done by soft x-ray (λ=80 Å) reflectivity measurements at Indus-1 reflectivity beam line. Different gas plasma removes carbon with different rate (0.4 to 0.65 nm /min). A thin layer 2 to 9 nm of different roughness and density is observed at the top surface of tungsten film. Ar gas plasma is found more suitable for cleaning of tungsten surface.

Preservation of cranial nerves during removal of the brain for an enhanced student experience in neuroanatomy classes.

Science.gov (United States)

Long, Jennifer; Roberts, David J H; Pickering, James D

2014-01-01

Neuroanatomy teaching at the University of Leeds includes the examination of isolated brains by students working in small groups. This requires the prosected brains to exhibit all 12 pairs of cranial nerves. Traditional methods of removing the brain from the skull involve elevating the frontal lobes and cutting each cranial nerve as the brain is reflected posteriorly. This can leave a substantial length of each nerve attached to the skull base rather than to the removed brain. We have found a posterior approach more successful. In this study, five adult heads were disarticulated at the level of the thyroid cartilage and placed, prone, in a head stand. A wedge of bone from the occipital region was removed before the cerebellum and brainstem were elevated to visualize the cranial nerves associated with the medulla oblongata, cerebellopontine angle and mesencephalic-pontine junction prior to cutting them as close to the skull as possible. Five brains were successfully removed from the skull, each having a full complement of cranial nerves of good length attached to them. This approach significantly increases the length and number of cranial nerves remaining attached to the brain, which supports student education. For integration into head and neck dissection courses, careful consideration will be required to ensure the necks are suitably dissected and to decide whether the cranial nerves are best left attached to the skull base or brain. Copyright © 2013 Wiley Periodicals, Inc.

Removal properties of human enteric viruses in a pilot-scale membrane bioreactor (MBR) process.

Science.gov (United States)

Miura, Takayuki; Okabe, Satoshi; Nakahara, Yoshihito; Sano, Daisuke

2015-05-15

In order to evaluate removal properties of human enteric viruses from wastewater by a membrane bioreactor (MBR), influent, anoxic and oxic mixed liquor, and membrane effluent samples were collected in a pilot-scale anoxic-oxic MBR process for 16 months, and concentrations of enteroviruses, norovirus GII, and sapoviruses were determined by real-time PCR using murine norovirus as a process control. Mixed liquor samples were separated into liquid and solid phases by centrifugation, and viruses in the bulk solution and those associated with mixed liquor suspended solids (MLSS) were quantified. Enteroviruses, norovirus GII, and sapoviruses were detected in the influent throughout the sampling period (geometrical mean, 4.0, 3.1, and 4.4 log copies/mL, respectively). Enterovirus concentrations in the solid phase of mixed liquor were generally lower than those in the liquid phase, and the mean log reduction value between influent and anoxic mixed liquor was 0.40 log units. In contrast, norovirus GII and sapovirus concentrations in the solid phase were equal to or higher than those in the liquid phase, and higher log reduction values (1.3 and 1.1 log units, respectively) were observed between influent and anoxic mixed liquor. This suggested that enteroviruses were less associated with MLSS than norovirus GII and sapoviruses, resulting in lower enterovirus removal in the activated sludge process. Enteroviruses and norovirus GII were detected in the MBR effluent but sapoviruses were not in any effluent samples. When MLSS concentration was reduced to 50-60% of a normal operation level, passages of enteroviruses and norovirus GII through a PVDF microfiltration membrane were observed. Since rejection of viruses by the membrane was not related to trans-membrane pressure which was monitored as a parameter of membrane fouling, the results indicated that adsorption to MLSS plays an important role in virus removal by an MBR, and removal properties vary by viruses reflecting different

Attitude Motion of Cylindrical Space Debris during Its Removal by Ion Beam

Directory of Open Access Journals (Sweden)

Vladimir S. Aslanov

2017-01-01

Full Text Available The paper is devoted to the problem of space debris mitigation. Contactless method of the space debris deorbiting is considered. It is assumed that ion thrusters on the active spacecraft create the ion flow, which blows the debris and slows it down. The objectives of this work are the development of mathematical models and the research of space debris motion under the action of the ion flow. It is supposed that the space debris is a rigid body of a cylindrical shape. Calculation of ion beam force and torque was performed for a self-similar model of plasma plume expansion using the hypothesis of ion fully diffused reflection from a surface. A mathematical model describing plane motions of the cylindrical space debris under the influence of gravity gradient torque and the ion flux was constructed. It was shown that motion of the space debris around its center of mass has a significant effect on its removal time. Phase portraits, describing the motion of the space debris relative to its center of mass, were constructed. Comparison of the descent times in different motion modes was carried out. The results can be used to create new effective systems of large space debris removal.

Surgical aspects of removal of Essure microinsert.

Science.gov (United States)

Albright, Catherine M; Frishman, Gary N; Bhagavath, Bala

2013-09-01

Essure is designed as a hysteroscopically placed permanent birth control. Removal of the Essure microinsert can be a technically challenging procedure. Requests for removal are uncommon but do occur. Although hysteroscopic and laparoscopic removal has been reported, there is limited information available describing appropriate surgical technique. There have been six patients requesting Essure removal at our institution (one approximately 2 years after placement). Based on this experience, we have developed specific counseling points and surgical principles for laparoscopic removal: avoid injection of a hemostatic solution into the fallopian tube; avoid excessive traction on the coils; avoid cauterization of the outer coil; follow the Essure coil into the interstitial end of the fallopian tube to ensure complete removal of the insert; perform a salpingectomy rather than a salpingostomy. By taking into account these principles, key preoperative counseling points can be discussed, and laparoscopic Essure removal years after placement can be accomplished in a safe and deliberate fashion. Copyright © 2013 Elsevier Inc. All rights reserved.

Eliminating line of sight in elliptic guides using gravitational curving

DEFF Research Database (Denmark)

Klenø, Kaspar H.; Willendrup, Peter Kjær; Bergbäck Knudsen, Erik

2011-01-01

result in a breakdown of the geometrical focusing mechanism inherent to the elliptical shape, resulting in unwanted reflections and loss of transmission. We present a new and yet untried idea by curving a guide in such a way as to follow the ballistic curve of a neutron in the gravitational field, while...

Removal of micropollutants during tertiary wastewater treatment by biofiltration: Role of nitrifiers and removal mechanisms.

Science.gov (United States)

Rattier, M; Reungoat, J; Keller, J; Gernjak, W

2014-05-01

The objective of this study was to determine the extent to which a suite of organic micropollutants (MPs) can be removed by biological filtration and the role of bioavailability and ammonia oxidizing microorganisms (AOMs) in the biodegradation process. During approximately one year, laboratory-scale columns with 8 min empty bed contact time (EBCT) and packed with anthracite as filter media were used for treating a tertiary effluent spiked with a broad range of MPs at a target concentration of 2 μg L(-1). In parallel columns, aerobic biomass growth was inhibited by using either the biocide sodium azide (500 mg L(-1) NaN3) or allylthiourea (5 mg L(-1) ATU), specifically inhibiting nitrifying bacteria. Once the biomass had colonized the media, around 15% of the dissolved organic carbon (DOC) contained in the untreated tertiary effluent was removed by non-inhibited columns. The removal of several MPs increased over time indicating the relevance of biological activity for the removal of MPs, while the negative control, the NaN3 inhibited column, showed no significant removal. Out of 33 MPs, 19 were recalcitrant (granular activated carbon (GAC) and their removal efficiency by biodegradation on anthracite was observed. This result suggested that the affinity of the MPs for GAC media could be a useful indicator of the bioavailability of compounds during biofiltration on anthracite. Copyright © 2014 Elsevier Ltd. All rights reserved.

Students’ Learning through Reflective Journaling

OpenAIRE

Alvyda Liuolienė; Regina Metiūnienė

2011-01-01

The aim of the article is to get acquainted with the types of journals used in education to help students to learn. The paper presents some ways of fostering student’s learning through reflective journaling. It also describes the key aspects of a new method ARRIVE cycle in connection with teachers preparation to use reflective journals in a classroom. The article also presents self-assessment in reflective journaling and students’ need to self-evaluate their learning process. Reflective journ...

Selectively reflective transparent sheets

Science.gov (United States)

Waché, Rémi; Florescu, Marian; Sweeney, Stephen J.; Clowes, Steven K.

2015-08-01

We investigate the possibility to selectively reflect certain wavelengths while maintaining the optical properties on other spectral ranges. This is of particular interest for transparent materials, which for specific applications may require high reflectivity at pre-determined frequencies. Although there exist currently techniques such as coatings to produce selective reflection, this work focuses on new approaches for mass production of polyethylene sheets which incorporate either additives or surface patterning for selective reflection between 8 to 13 μ m. Typical additives used to produce a greenhouse effect in plastics include particles such as clays, silica or hydroxide materials. However, the absorption of thermal radiation is less efficient than the decrease of emissivity as it can be compared with the inclusion of Lambertian materials. Photonic band gap engineering by the periodic structuring of metamaterials is known in nature for producing the vivid bright colors in certain organisms via strong wavelength-selective reflection. Research to artificially engineer such structures has mainly focused on wavelengths in the visible and near infrared. However few studies to date have been carried out to investigate the properties of metastructures in the mid infrared range even though the patterning of microstructure is easier to achieve. We present preliminary results on the diffuse reflectivity using FDTD simulations and analyze the technical feasibility of these approaches.

Spleen removal

Science.gov (United States)

... spleen. Sickle cell anemia . Splenic artery aneurysm (rare). Trauma to the spleen. Risks Risks for anesthesia and surgery in general ... removal - series References Brandow AM, Camitta BM. Hyposplenism, splenic trauma, and splenectomy. In: Kliegman RM, Stanton BF, St. ...

Nitrogen removal from coal gasification wastewater by activated carbon technologies combined with short-cut nitrogen removal process.

Science.gov (United States)

Zhao, Qian; Han, Hongjun; Hou, Baolin; Zhuang, Haifeng; Jia, Shengyong; Fang, Fang

2014-11-01

A system combining granular activated carbon and powdered activated carbon technologies along with shortcut biological nitrogen removal (GAC-PACT-SBNR) was developed to enhance total nitrogen (TN) removal for anaerobically treated coal gasification wastewater with less need for external carbon resources. The TN removal efficiency in SBNR was significantly improved by introducing the effluent from the GAC process into SBNR during the anoxic stage, with removal percentage increasing from 43.8%-49.6% to 68.8%-75.8%. However, the TN removal rate decreased with the progressive deterioration of GAC adsorption. After adding activated sludge to the GAC compartment, the granular carbon had a longer service-life and the demand for external carbon resources became lower. Eventually, the TN removal rate in SBNR was almost constant at approx. 43.3%, as compared to approx. 20.0% before seeding with sludge. In addition, the production of some alkalinity during the denitrification resulted in a net savings in alkalinity requirements for the nitrification reaction and refractory chemical oxygen demand (COD) degradation by autotrophic bacteria in SBNR under oxic conditions. PACT showed excellent resilience to increasing organic loadings. The microbial community analysis revealed that the PACT had a greater variety of bacterial taxons and the dominant species associated with the three compartments were in good agreement with the removal of typical pollutants. The study demonstrated that pre-adsorption by the GAC-sludge process could be a technically and economically feasible method to enhance TN removal in coal gasification wastewater (CGW). Copyright © 2014. Published by Elsevier B.V.

Nitrogen and COD removal from domestic and synthetic wastewater in subsurface-flow constructed wetlands.

Science.gov (United States)

Collison, R S; Grismer, M E

2013-09-01

Comparisons of the performance of constructed-wetland systems (CWs) for treating domestic wastewater in the laboratory and field may use pathogen-free synthetic wastewater to avoid regulatory health concerns. However, little to no data are available describing the relative treatment efficiencies of CWs to both actual and synthetic domestic wastewaters so as to enable such comparison. To fill this gap, treatment performances with respect to organics (chemical organic demand; COD) and nitrogen (ammonium and nitrate) removal from domestic (septic tank) and a similar-strength synthetic wastewater under planted and non-planted subsurface-flow CWs are determined. One pair of CWs was planted with cattails in May 2008, whereas the adjacent system was non-planted. Collected septic tank or synthesized wastewater was allowed to gravity feed each CWs, and effluent samples were collected and tested for COD and nitrogen species regularly during four different periods over six months. Overall, statistically significant greater removal of COD (-12%) and nitrogen (-5%) occurred from the synthetic as compared with the domestic wastewater from the planted and non-planted CWs. Effluent BOD5/COD ratios from the synthetic wastewater CWs averaged nearly twice that from the domestic wastewater CWs (0.17 vs 0.10), reflecting greater concentrations of readily degraded compounds. That removal fractions were consistent across the mid-range loading rates to the CWs suggests that the synthetic wastewater can be used in testing laboratory CWs with reasonable success in application of their results to the field.

Performance of ALMR passive decay heat removal system

International Nuclear Information System (INIS)

Boardman, C.E.; Hunsbedt, A.

1991-01-01

The Advanced Liquid Metal Reactor (ALMR) concept has a totally passive safety-grade decay heat removal system referred to as the Reactor Vessel Auxiliary Cooling System (RVACS) that rejects heat from the small (471 MWt) modular reactor to the environmental air by natural convection heat transfer. The system has no active components, requires no operator action to initiate, and is inherently reliable. The RVACS can perform its function under off-normal or degraded operating conditions without significant loss in performance. Several such events are described and the RVACS thermal performance for each is given and compared to the normal operation performance. The basic RVACS performance as well as the performance during several off-normal events have been updated to reflect design changes for recycled fuel with minor actinides for end of equilibrium cycle conditions. The performance results for several other off-normal events involving various degrees of RVACS air flow passage blockages are presented. The results demonstrated that the RVACS is unusually tolerant to a wide range of postulated faults. (author)

Perioperative self-reflection among surgical residents.

Science.gov (United States)

Peshkepija, Andi N; Basson, Marc D; Davis, Alan T; Ali, Muhammad; Haan, Pam S; Gupta, Rama N; Hardaway, John C; Nebeker, Cody A; McLeod, Michael K; Osmer, Robert L; Anderson, Cheryl I

2017-09-01

We studied prevalence and predictors of meaningful self-reflection among surgical residents and with prompting/structured interventions, sought to improve/sustain resident skills. Residents from six programs recorded 1032 narrative self-reflective comments (120 residents), using a web-based platform. If residents identified something learned or to be improved, self-reflection was deemed meaningful. Independent variables PGY level, resident/surgeon gender, study site/Phase1: July2014-August2015 vs. Phase2: September2015-September2016) were analyzed. Meaningful self-reflection was documented in 40.6% (419/1032) of entries. PGY5's meaningfully self-reflected less than PGY1-4's, 26.1% vs. 49.6% (p = 0.002). In multivariate analysis, resident narratives during Phase 2 were 4.7 times more likely to engage in meaningful self-reflection compared to Phase1 entries (p self-reflection, compared to Phase1. Surgical residents uncommonly practice meaningful self-reflection, even when prompted, and PGY5/chief residents reflect less than more junior residents. Substantial/sustained improvements in resident self-reflection can occur with both training and interventions. Copyright © 2017 Elsevier Inc. All rights reserved.

Biological removal of iron and manganese in rapid sand filters - Process understanding of iron and manganese removal

DEFF Research Database (Denmark)

Lin, Katie

to precipitation and corrosion. Manganese and iron can either be removed physico-chemically or biologically or combined. The physico-chemical oxidation and precipitation of manganese can theoretically be achieved by aeration, but this process is slow unless pH is raised far above neutral, making the removal...... of manganese by simple aeration and precipitation under normal drinking water treatment conditions insignificant. Manganese may also be oxidized autocatalytically. Iron is usually easier to remove. First, iron is rapidly chemically oxidized by oxygen at neutral pH followed by precipitation and filtration......-filter, where iron is removed. Step 2: Filtration in an after-filter where e.g. ammonium and manganese is removed. The treatment relies on microbial processes and may present an alternative, greener and more sustainable approach for drinking water production spending less chemicals and energy than chemical (e...

On the reflection point where light reflects to a known destination on quadratic surfaces.

Science.gov (United States)

Gonçalves, Nuno

2010-01-15

We address the problem of determining the reflection point on a specular surface where a light ray that travels from a source to a target is reflected. The specular surfaces considered are those expressed by a quadratic equation. So far, there is no closed form explicit equation for the general solution of this determination of the reflection point, and the usual approach is to use the Snell law or the Fermat principle whose equations are derived in multidimensional nonlinear minimizations. We prove in this Letter that one can impose a set of three restrictions to the reflection point that can impose a set of three restrictions that culminates in a very elegant formalism of searching the reflection point in a unidimensional curve in space. This curve is the intersection of two quadratic equations. Some applications of this framework are also discussed.

Bacteriophages as indicators of faecal pollution and enteric virus removal.

Science.gov (United States)

McMinn, B R; Ashbolt, N J; Korajkic, A

2017-07-01

Bacteriophages are an attractive alternative to faecal indicator bacteria (FIB), particularly as surrogates of enteric virus fate and transport, due to their closer morphological and biological properties. Based on a review of published data, we summarize densities of coliphages (F+ and somatic), Bacteroides spp. and enterococci bacteriophages (phages) in individual human waste, raw wastewater, ambient fresh and marine waters and removal through wastewater treatment processes utilizing traditional treatments. We also provide comparisons with FIB and enteric viruses whenever possible. Lastly, we examine fate and transport characteristics in the aquatic environment and provide an overview of the environmental factors affecting their survival. In summary, concentrations of bacteriophages in various sources were consistently lower than FIB, but more reflective of infectious enteric virus levels. Overall, our investigation indicates that bacteriophages may be adequate viral surrogates, especially in built systems, such as wastewater treatment plants. Bacteriophage are alternative fecal indicators that may be better surrogates for viral pathogens than fecal indicator bacteria (FIB). This report offers a summary of the existing literature concerning the utility of bacteriophage as indicators of viral presence (fecal sources and surface waters) and persistence (in built infrastructure and aquatic environments). Our findings indicate that bacteriophage levels in all matrices examined are consistently lower than FIB, but similar to viral pathogens. Furthermore, in built infrastructure (e.g. wastewater treatment systems) bacteriophage closely mimic viral pathogen persistence suggesting they may be adequate sentinels of enteric virus removal. © 2017 The Society for Applied Microbiology.

Removal of radiation damage by subpopulations of plateau-phase Chinese hamster ovary cells

International Nuclear Information System (INIS)

Nelson, J.M.; Metting, N.F.; Braby, L.A.; Roesch, W.C.

1987-01-01

Specific cellular radiobiology studies are often required to test aspects of the mathematical models developed in the Radiation Dosimetry program. These studies are designed to determine whether specific mathematical expressions, which characterize the expected effect of biochemical mechanisms on observable biological responses, are consistent with the behavior of selected cell lines. Since these tests place stringent requirements on the cellular system, special techniques and culture conditions are required to minimize biological variability. The use of specialized cell populations is providing data on the extent of repair following low doses, and on the changes in the types of damage that can be repaired as the cell progresses toward mitosis. The stationary-phase Chinese hamster ovary (CHO) cells are composed primarily of G(1)-phase cells (83%), with the remainder comprising both G(2) and S phases. Removal of radiation damage by cells was studied in split-dose experiments. To date, we have observed no significant differences in cellular repair rate. This suggests, therefore, that each of the repair processes found in stationary-phase cells is cell-age independent. However, cellular radiation sensitivity does change rapidly and considerably as the cells progress from one phase to the next through the cell cycle. Since the rate of damage removal appears invariant, the change in survival must reflect the efficiency of producing that damage. The experimental data suggest that production of one or another sort of damage probably dominates during specific phases of the cell cycle, while the capacity for removal of all types of damage remains relatively constant

Face mask removal is safer than helmet removal for emergent airway access in American football.

Science.gov (United States)

Swartz, Erik E; Mihalik, Jason P; Beltz, Nora M; Day, Molly A; Decoster, Laura C

2014-06-01

In cases of possible cervical spine injury, medical professionals must be prepared to achieve rapid airway access while concurrently restricting cervical spine motion. Face mask removal (FMR), rather than helmet removal (HR), is recommended to achieve this. However, no studies have been reported that compare FMR directly with HR. The purpose of this study was to compare motion, time, and perceived difficulty in two commonly used American football helmets between FMR and HR techniques, and when helmet air bladders were deflated before HR compared with inflated scenarios. The study incorporated a repeated measures design and was performed in a controlled laboratory setting. Participants included 22 certified athletic trainers (15 men and seven women; mean age, 33.9±10.5 years; mean experience, 11.4±10.0 years; mean height, 172±9.4 cm; mean mass, 76.7±14.9 kg). All participants were free from upper extremity or central nervous system pathology for 6 months and provided informed consent. Dependent variables included head excursion in degrees (computed by subtracting the minimum position from the maximum position) in each of the three planes (sagittal, frontal, transverse), time to complete the required task, and ratings of perceived exertion. To address our study purposes, we used two-by-two repeated-measures analysis of variance (removal technique×helmet type, helmet type×deflation status) for each dependent variable. Independent variables consisted of removal technique (FMR and HR), helmet type (Riddell Revolution IQ [RIQ] and VSR4), and helmet deflation status (deflated [D], inflated, [I]). After familiarization, participants conducted two successful trials for each of six conditions in random order (RIQ-FMR, VSR4-FMR, RIQ-HR-D, VSR4-HR-D, RIQ-HR-I, and VSR4-HR-I). Face masks, helmets, and shoulder pads were removed from a live model wearing a properly fitted helmet and shoulder pads. The participant and an investigator stabilized the model's head. A six

Reflection in Russian Educational Psychology.

Science.gov (United States)

Nelissen, Jo M. C.; Tomic, Welko

This paper discusses the cultural-historical school founded by Vygotsky, Luria, and Leontiev as the theoretical background of Russian educational psychologists who have been studying how children learn to reflect. Two approaches to reflection are examined within the cultural-historical tradition: first, reflection--like other higher psychological…

Complications of syndesmotic screw removal

NARCIS (Netherlands)

T. Schepers (Tim); E.M.M. van Lieshout (Esther); M.R. de Vries (Mark); M. van der Elst (Maarten)

2011-01-01

textabstractBackground: Currently, the metallic syndesmotic screw is the gold standard in the treatment of syndesmotic disruption. Whether or not this screw needs to be removed remains debatable. The aim of the current study was to determine the complications which occur following routine removal of

Self-reflection, gender and science achievement

Science.gov (United States)

Shoop, Kathleen A.

Drawing on socio-cognitive learning theory, this study compared achievement scores of 134 male and female high school biology students randomly assigned to groups which either used self-reflection, used self-reflection and received feedback, or did not self-reflect. Following a pretest, the teacher provided self-reflection strategy instruction to students in the two intervention groups and then subsequently provided in-class self-reflection time for these groups. The posttest concluded the unit; the retention measure was five weeks later. A quasi-experimental 3 x 3 x 2 (time x intervention x gender) factorial repeated-measures control group design was used for this study; a repeated measures ANOVA and several one-way ANOVA's were used to answer the research questions. Results from the repeated-measures ANOVA revealed significant results for Time and Time x Intervention, with the reflection group demonstrating significantly lower gains from pretest to posttest than the other two groups. The ANOVA examining differences between those who reflected and those who reflected and received feedback provided significant results with similar results for the difference between the control group and the reflection group. For teachers and students this study provides several areas of practical significance. Primarily, teachers may find lower student achievement if students regularly self-reflect but do not receive feedback for their reflection.

Terpenes removal from biogas; Terpenenverwijdering uit biogas

Energy Technology Data Exchange (ETDEWEB)

Schulze, P.; Holstein, J.; De Haan, HR.; Vlap, H. [DNV KEMA, Arnhem (Netherlands)

2013-06-15

Biogas may contain unwanted and harmful components, including aromatic hydrocarbons such as terpenes. These terpenes (organic oils) are mainly present in citrus peel and plant residues; that is why especially raw biogas from organic waste digestion plants contains high concentrations of terpenes. If terpenes end up in the gas grid (with the injected biomethane) there is a risk that plastics (PE pipes) lose their mechanical properties by absorbing liquids or extracting ethereal plasticizers. This can lead to embrittlement greatly lowering the reliability of the piping. In addition, soft components are als o affected (gaskets and rubber O-rings). Besides the impact on the integrity of the gas grid, terpenes also mask the odor of natural gas odorants such as THT. This impedes the detection of gas leaks which is a significant security risk. Furthermore, the presence of terpenes in biogas leads to fouling of equipment used for the drying of biomethane, as well as contamination of adsorption liquids and membranes used in the upgrading process. Currently, terpenes are removed by activated carbon filters. The tool life of such a filter can be relatively short if terpene concentrations are high in the biogas; this results in a significant increase of the operational costs, due to the replacement of the carbon. This study looked at alternative techniques for removing much of the terpenes from biogas in a simple, efficient and cheap way. In a workshop with stakeholders two techniques were chosen to be tested on laboratory scale in order to demonstrate the proof of principle. These techniques are photo-oxydation and a gas scrubbing. Of all investigated techniques for the removal of limonene the application of UV radiation seems to be the most promising option because of the simplicity of the process, the high efficiency (up to 94%), the comparable operational costs with activated carbon (6.7 to 9.5 euro/kg limonene removed, compared to 10 euro/kg limonene removed for activated

Monitoring the reflection from an artificial defect in rail track using guided wave ultrasound

Science.gov (United States)

Loveday, Philip W.; Taylor, Rebecca M. C.; Long, Craig S.; Ramatlo, Dineo A.

2018-04-01

Guided wave ultrasound has the potential to detect relatively large defects in continuously welded rail track at long range. As monitoring can be performed in near real time it would be acceptable to only detect fairly large cracks provided this is achieved prior to complete rail breakage. Heavy haul rail lines are inspected periodically by conventional ultrasound and sections with even relatively small cracks are removed; therefore, no sizable defects are available to demonstrate monitoring in the presence of realistic environmental operating conditions. Instead, we glued a small mass to the rail to simulate reflection from a crack and monitored the guided wave signals as the glue joint deteriorated over time. Data was collected over a two week period on an operational heavy haul line. A piezoelectric transducer mounted under the head of the rail was used in pulse-echo mode to transmit and receive a mode of propagation with energy confined mainly in the head of the rail. The small mass was attached under the head of the rail, at a distance of 375m from the transducer, using a cyanoacrylate glue, which was not expected to remain intact for long. Pre-processing of the collected signals involved rejection of signals containing train noise, averaging, filtering and dispersion compensation. Reflections from aluminothermic welds were used to stretch and scale the signals to reduce the influence of temperature variations. Singular value decomposition and independent component analysis were then applied to the signals with the aim of separating the reflection caused by the artificial defect from the background signal. The performance of these techniques was compared for different time spans. The reflection from the artificial defect showed unanticipated fluctuations.

How Effective are Existing Arsenic Removal Techniques

Science.gov (United States)

This presentation will summarize the system performance results of the technologies demonstrated in the arsenic demonstration program. The technologies include adsorptive media, iron removal, iron removal with iron additions, iron removal followed by adsorptive media, coagulatio...

Technetium removal from aqueous wastes

International Nuclear Information System (INIS)

Fletcher, P.A.; Jones, C.P.; Junkison, A.R.; Turner, A.D.; Kavanagh, P.R.

1992-03-01

The research discussed in this report has compared several ''state of the art'' techniques for the removal of traces of the radionuclide, technetium, from aqueous wastes. The techniques investigated were: electrochemical reduction to an insoluble oxide, electrochemical ion exchange, seeded ultrafiltration and chemical reduction followed by filtration. Each technique was examined using a simulant based upon the waste generated by the Enhanced Actinide Removal Plant (EARP) at Sellafield. The technique selected for further investigation was direct electrochemical reduction which offers an ideal route for the removal of technetium from the stream (DFs 10-100) and can be operated continuously with a low power consumption 25 kW for the waste generated by EARP. Cell designs for scale up have been suggested to treat the 1000m 3 of waste produced every day. Future work is proposed to investigate the simultaneous removal of other key radionuclides, such as ruthenium, plutonium and cobalt as well as scale up of the resulting process and to investigate the effect of these other radionuclides on the efficiency of the electrochemical reduction technique for the removal of technetium. Total development and full scale plant costs are estimated to be of the order of 5 pounds - 10M, with a time scale of 5 -8 years to realisation. (author)

Reflection during Portfolio-Based Conversations

Science.gov (United States)

Oosterbaan, Anne E.; van der Schaaf, Marieke F.; Baartman, Liesbeth K. J.; Stokking, Karel M.

2010-01-01

This study aims to explore the relationship between the occurrence of reflection (and non-reflection) and thinking activities (e.g., orientating, selecting, analysing) during portfolio-based conversations. Analysis of 21 transcripts of portfolio-based conversations revealed that 20% of the segments were made up of reflection (content reflection…

The behaviour, fate and removal of pharmaceuticals in biological nutrient removal sewage treatment

OpenAIRE

Popple, Tina

2013-01-01

Pharmaceuticals that are intended for human use are frequently detected in the aquatic environment. This is predominantly from the excretion of pharmaceuticals by patients, in their urine and faeces, which subsequently enter sewage treatment plants. Sewage treatment provides a final opportunity for pharmaceutical removal, prior to discharge into the environment, however, removal is often incomplete. Once in the environment, pharmaceuticals have the potential to cause effects on aquatic organi...

Complications of syndesmotic screw removal

NARCIS (Netherlands)

Schepers, Tim; van Lieshout, Esther M. M.; de Vries, Mark R.; van der Elst, Maarten

2011-01-01

Currently, the metallic syndesmotic screw is the gold standard in the treatment of syndesmotic disruption. Whether or not this screw needs to be removed remains debatable. The aim of the current study was to determine the complications which occur following routine removal of the syndesmotic screw

Arsenic removal by lime softening

DEFF Research Database (Denmark)

Kaosol, T.; Suksaroj, C.; Bregnhøj, Henrik

2002-01-01

This paper focuses on the study of arsenic removal for drinking water by lime softening. The initial arsenic (V) concentration was 500 and 1,000 ug/L in synthetic groundwater. The experiments were performed as batch tests with varying lime dosages and mixing time. For the synthetic groundwater......, arsenic (V) removal increased with increasing lime dosage and mixing time, as well as with the resulting pH. The residual arsenic (V) in all cases was lower than the WHO guideline of 10 ug/L at pH higher than 11.5. Kinetic of arsenic (V) removal can be described by a first-order equation as C1 = C0*e......^-k*t. The relation between the constant (k value) and increasing lime dosage was found to be linear, described by k = 0.0034 (Dlime). The results support a theory from the literature that the arsenic (V) was removed by precipitation af Ca3(AsO4)2. The results obtained in the present study suggest that lime...

Membrane adsorber for endotoxin removal

Directory of Open Access Journals (Sweden)

Karina Moita de Almeida

Full Text Available ABSTRACT The surface of flat-sheet nylon membranes was modified using bisoxirane as the spacer and polyvinyl alcohol as the coating polymer. The amino acid histidine was explored as a ligand for endotoxins, aiming at its application for endotoxin removal from aqueous solutions. Characterization of the membrane adsorber, analysis of the depyrogenation procedures and the evaluation of endotoxin removal efficiency in static mode are discussed. Ligand density of the membranes was around 7 mg/g dry membrane, allowing removal of up to 65% of the endotoxins. The performance of the membrane adsorber prepared using nylon coated with polyvinyl alcohol and containing histidine as the ligand proved superior to other membrane adsorbers reported in the literature. The lack of endotoxin adsorption on nylon membranes without histidine confirmed that endotoxin removal was due to the presence of the ligand at the membrane surface. Modified membranes were highly stable, exhibiting a lifespan of approximately thirty months.

Reflective Practice: Origins and Interpretations

Science.gov (United States)

Reynolds, Michael

2011-01-01

The idea of reflection is central to the theory and practice of learning--especially learning which is grounded in past or current experience. This paper proposes a working definition of reflection and reviews its origins and recent developments. The author also provides an account of "critical reflection", including its rationale and…

Berlin Reflectance Spectral Library (BRSL)

Science.gov (United States)

Henckel, D.; Arnold, G.; Kappel, D.; Moroz, L. V.; Markus, K.

2017-09-01

The Berlin Reflectance Spectral Library (BRSL) provides a collection of reflectance spectra between 0.3 and 17 µm. It was originally dedicated to support space missions to small solar system bodies. Meanwhile the library includes selections of biconical reflectance spectra for spectral data analysis of other planetary bodies as well. The library provides reference spectra of well-characterized terrestrial analogue materials and meteorites for interpretation of remote sensing reflectance spectra of planetary surfaces. We introduce the BRSL, summarize the data available, and access to use them for further relevant applications.

Removing intranasal splints after septal surgery.

Science.gov (United States)

Aksoy, Elif; Serin, Gediz Murat; Polat, Senol; Kaytaz, Asm

2011-05-01

The aim of this retrospective chart review of the patients who had septal surgery with or without turbinate surgery was to compare the postoperative complication rates according to the time of intranasal-splint (INS) removal. The data of 137 patients who underwent septal surgery with or without turbinate surgery at 2 different hospitals of Acıbadem Health Care Group between January 2007 and March 2009 were retrospectively evaluated. The patients who had these risk factors were eliminated, and 96 patients were included in this study. The patients were divided into 2 groups according to splint-removal time. The first group comprises patients whose nasal splints were removed in 24 hours after surgery, and the second group comprises patients whose splints were removed 5 days after the surgery. Any bleeding, septal hematoma, and synechia after pack removal were recorded. Analysis of the rate of complications was done with the χ test. Sixty-five male and 31 female patients with a mean age of 32.4 years (range, 18-57 years) were included in the study groups. Septal surgeries were performed in association with turbinate surgery in all 96 patients. These patients were divided into 2 groups. In the first group (n = 50), INSs were removed in 24 hours after surgery. In the second group (n = 46), INSs were removed 5 days after surgery. Bleeding within the first postoperative week was not recorded in both groups. Late bleeding was recorded in 2% (n = 1) of group 1 and in 2.17% (n = 1) in group 2. Septal hematoma and synechia were not recorded in none of the groups. The results were not statistically significant (P = 1). The routine use of INSs after septoplasty and removing them 24 hours after septoplasty are sufficient to avoid postoperative complications, and it minimizes postoperative discomfort.

[Removable partial dentures. Oral functions and types

NARCIS (Netherlands)

Creugers, N.H.J.; Baat, C. de

2009-01-01

A removable partial denture enables the restoration or improvement of 4 oral functions: aesthetics, mandibular stability, mastication, and speech. However, wearing a removable partial denture should not cause oral comfort to deteriorate. There are 3 types of removable partial dentures: acrylic

Photocatalytic Reduction Activity of 001  TiO2 Codoped with F and Fe under Visible Light for Bromate Removal

Directory of Open Access Journals (Sweden)

Yan Zhang

2016-01-01

Full Text Available The presence of bromate in water is a well-known problem because of its toxic effects on human health, particularly its carcinogenic potential. Photocatalytic reduction is an attractive process for bromate removal. F- and Fe-codoped TiO2 (F-Fe-TiO2 with a {001} facet was successfully prepared, and its bromate-removal activity under visible light was examined. The microstructure, morphology, and chemical state of the doping elements and the optical property of the photocatalysts were examined using transmission electron microscopy (TEM, X-ray photoelectron spectroscopy (XPS, electron paramagnetic resonance (EPR, photoluminescence spectroscopy (PLS, and UV-Vis diffuse reflectance spectra (DRS. The results indicate that the optical properties of F-Fe-TiO2 with the {001} facet and cuboid morphology were obviously improved and its photocatalytic activity was significantly enhanced. The bromate solution of 100 μg/L was thoroughly removed with 0.5 g/L dosage of 1.0% F- and 0.08% Fe-codoped TiO2 composite within 1 hour under visible light.

Improved classification and visualization of healthy and pathological hard dental tissues by modeling specular reflections in NIR hyperspectral images

Science.gov (United States)

Usenik, Peter; Bürmen, Miran; Fidler, Aleš; Pernuš, Franjo; Likar, Boštjan

2012-03-01

Despite major improvements in dental healthcare and technology, dental caries remains one of the most prevalent chronic diseases of modern society. The initial stages of dental caries are characterized by demineralization of enamel crystals, commonly known as white spots, which are difficult to diagnose. Near-infrared (NIR) hyperspectral imaging is a new promising technique for early detection of demineralization which can classify healthy and pathological dental tissues. However, due to non-ideal illumination of the tooth surface the hyperspectral images can exhibit specular reflections, in particular around the edges and the ridges of the teeth. These reflections significantly affect the performance of automated classification and visualization methods. Cross polarized imaging setup can effectively remove the specular reflections, however is due to the complexity and other imaging setup limitations not always possible. In this paper, we propose an alternative approach based on modeling the specular reflections of hard dental tissues, which significantly improves the classification accuracy in the presence of specular reflections. The method was evaluated on five extracted human teeth with corresponding gold standard for 6 different healthy and pathological hard dental tissues including enamel, dentin, calculus, dentin caries, enamel caries and demineralized regions. Principal component analysis (PCA) was used for multivariate local modeling of healthy and pathological dental tissues. The classification was performed by employing multiple discriminant analysis. Based on the obtained results we believe the proposed method can be considered as an effective alternative to the complex cross polarized imaging setups.

Study on diverse passive decay heat removal approach

International Nuclear Information System (INIS)

Lin Qian; Si Shengyi

2012-01-01

One of the most important principles for nuclear safety is the decay heat removal in accidents. Passive decay heat removal systems are extremely helpful to enhance the safety. In currently design of many advanced nuclear reactors, kinds of passive systems are proposed or developed, such as the passive residual heat removal system, passive injection system, passive containment cooling system. These systems provide entire passive heat removal paths from core to ultimate heat sink. Various kinds of passive systems for decay heat removal are summarized; their common features or differences on heat removal paths and design principle are analyzed. It is found that, these passive decay heat removal paths are similarly common on and connected by several basic heat transfer modes and steps. By the combinations or connections of basic modes and steps, new passive decay heat removal approach or diverse system can be proposed. (authors)

Dynamic terahertz spectroscopy of gas molecules mixed with unwanted aerosol under atmospheric pressure using fibre-based asynchronous-optical-sampling terahertz time-domain spectroscopy

Science.gov (United States)

Hsieh, Yi-Da; Nakamura, Shota; Abdelsalam, Dahi Ghareab; Minamikawa, Takeo; Mizutani, Yasuhiro; Yamamoto, Hirotsugu; Iwata, Tetsuo; Hindle, Francis; Yasui, Takeshi

2016-06-01

Terahertz (THz) spectroscopy is a promising method for analysing polar gas molecules mixed with unwanted aerosols due to its ability to obtain spectral fingerprints of rotational transition and immunity to aerosol scattering. In this article, dynamic THz spectroscopy of acetonitrile (CH3CN) gas was performed in the presence of smoke under the atmospheric pressure using a fibre-based, asynchronous-optical-sampling THz time-domain spectrometer. To match THz spectral signatures of gas molecules at atmospheric pressure, the spectral resolution was optimized to 1 GHz with a measurement rate of 1 Hz. The spectral overlapping of closely packed absorption lines significantly boosted the detection limit to 200 ppm when considering all the spectral contributions of the numerous absorption lines from 0.2 THz to 1 THz. Temporal changes of the CH3CN gas concentration were monitored under the smoky condition at the atmospheric pressure during volatilization of CH3CN droplets and the following diffusion of the volatilized CH3CN gas without the influence of scattering or absorption by the smoke. This system will be a powerful tool for real-time monitoring of target gases in practical applications of gas analysis in the atmospheric pressure, such as combustion processes or fire accident.

Reflecting Team as an Evaluation/learning Instrument for Self-reflection of Teachers

Directory of Open Access Journals (Sweden)

Michling Malgorzata D.

2017-12-01

Full Text Available The Reflecting Team (RT is a method derived from systemic therapy in the 1980s by the social psychiatrist Tom Andersen. It is increasingly being used in training and evaluation contexts. The aim of the method is to create a space for the development of diverse perspectives and appropriate ideas and solutions in which the integrity of the students/customers/clients is preserved and the acceptance of proposals is facilitated. To this end, the systems involved (advice seekers, consultants, and observers enter a common process of alternately directed and non-directed communication. The RT is not only suitable to address communication problems in group work and other educational situations, but it can also help to consider the traditional teaching and learning processes in a reflective way. Reflecting teams can also significantly improve the feedback and quality of teaching and learning. The article deals with the use of RT in the context of the collective exchange of teaching staff with their students. It uses a problem as an evaluation form and learning instrument to reflect on their pedagogical approach and, at the same time, their relationship with students during the lessons. This is to present the RT method for collegial exchange (Process Flow: Advice-seeker, teacher, Interviewer, RT and their need for teacher reflection as well as the experience of self-efficacy (empowerment and self-sufficiency.

Born reflection kernel analysis and wave-equation reflection traveltime inversion in elastic media

KAUST Repository

Wang, Tengfei; Cheng, Jiubing

2017-01-01

Elastic reflection waveform inversion (ERWI) utilize the reflections to update the low and intermediate wavenumbers in the deeper part of model. However, ERWI suffers from the cycle-skipping problem due to the objective function of waveform residual

Organic micropollutant removal during river bank filtration

NARCIS (Netherlands)

Bertelkamp, C.

2015-01-01

This study investigated the factors influencing the main removal mechanisms (adsorption and biodegradation) for organic micropollutant (OMP) removal during river bank filtration (RBF) and the possibility of developing a predictive model of this process for OMP removal during RBF. Chapter 2 analysed

Removal and factors influencing removal of sulfonamides and trimethoprim from domestic sewage in constructed wetlands.

Science.gov (United States)

Dan A; Yang, Yang; Dai, Yu-Nv; Chen, Chun-Xing; Wang, Su-Yu; Tao, Ran

2013-10-01

Twelve pilot-scale constructed wetlands with different configurations were set up in the field to evaluate the removal and factors that influence removal of sulfonamides (sulfadiazine, sulfapyridine, sulfacetamide, sulfamethazine and sulfamethoxazole) and trimethoprim from domestic sewage. The treatments included four flow types, three substrates, two plants and three hydraulic loading rates across two seasons (summer and winter). Most target antibiotics were efficiently removed by specific constructed wetlands; in particular, all types of constructed wetlands performed well for the degradation of sulfapyridine. Flow types were the most important influencing factor in this study, and the best removal of sulfonamides was achieved in vertical subsurface-flow constructed wetlands; however, the opposite phenomenon was found with trimethoprim. Significant relationships were observed between antibiotic degradation and higher temperature and redox potential, which indicated that microbiological pathways were the most probable degradation route for sulfonamides and trimethoprim in constructed wetlands. Copyright © 2013 Elsevier Ltd. All rights reserved.

Test Plan for the overburden removal demonstration

International Nuclear Information System (INIS)

Rice, P.; Thompson, D.; Winberg, M.; Skaggs, J.

1993-06-01

The removal of soil overburdens from contaminated pits and trenches involves using equipment that will remove a small layer of soil from 3 to 6 in. at any time. As a layer of soil is removed, overburden characterization techniques perform surveys to a depth that exceeds each overburden removal layer to ensure that the removed soil will be free of contamination. It is generally expected that no contamination will be found in the soil overburden, which was brought in after the waste was put in place. It is anticipated that some containers in the waste zone have lost their integrity, and the waste leakage from those containers has migrated by gravity downward into the waste zone. To maintain a safe work environment, this method of overburden removal should allow safe preparation of a pit or trench for final remediation. To demonstrate the soil overburden techniques, the Buried Waste Integrated Demonstration Program has contracted vendor services to provide equipment and techniques demonstrating soil overburden removal technology. The demonstration will include tests that will evaluate equipment performance and techniques for removal of overburden soil, control of contamination spread, and dust control. To evaluate the performance of these techniques, air particulate samples, physical measurements of the excavation soil cuts, maneuverability measurements, and time versus volume (rate) of soil removal data will be collected during removal operations. To provide a medium for sample evaluation, the overburden will be spiked at specific locations and depths with rare earth tracers. This test plan will be describe the objectives of the demonstration, data quality objectives, methods to be used to operate the equipment and use the techniques in the test area, and methods to be used in collecting data during the demonstration

Eliminating line of sight in elliptic guides using gravitational curving

International Nuclear Information System (INIS)

Kleno, Kaspar H.; Willendrup, Peter K.; Knudsen, Erik; Lefmann, Kim

2011-01-01

Eliminating fast neutrons (λ<0.5A) by removing direct line of sight between the source and the target sample is a well established technique. This can be done with little loss of transmission for a straight neutron guide by horizontal curving. With an elliptic guide shape, however, curving the guide would result in a breakdown of the geometrical focusing mechanism inherent to the elliptical shape, resulting in unwanted reflections and loss of transmission. We present a new and yet untried idea by curving a guide in such a way as to follow the ballistic curve of a neutron in the gravitational field, while still retaining the elliptic shape seen from the accelerated reference frame of the neutron. Analytical calculations and ray-tracing simulations show that this method is useful for cold neutrons at guide lengths in excess of 100 m. We will present some of the latest results for guide optimization relevant for instrument design at the ESS, in particular an off-backscattering spectrometer which utilizes the gravitational curving, for 6.66 A neutrons over a guide length of 300 m.

[Acrylic resin removable partial dentures

NARCIS (Netherlands)

Baat, C. de; Witter, D.J.; Creugers, N.H.J.

2011-01-01

An acrylic resin removable partial denture is distinguished from other types of removable partial dentures by an all-acrylic resin base which is, in principle, solely supported by the edentulous regions of the tooth arch and in the maxilla also by the hard palate. When compared to the other types of

TMI-2 reactor-vessel head removal and damaged-core-removal planning

International Nuclear Information System (INIS)

Logan, J.A.; Hultman, C.W.; Lewis, T.J.

1982-01-01

A major milestone in the cleanup and recovery effort at TMI-2 will be the removal of the reactor vessel closure head, planum, and damaged core fuel material. The data collected during these operations will provide the nuclear power industry with valuable information on the effects of high-temperature-dissociated coolant on fuel cladding, fuel materials, fuel support structural materials, neutron absorber material, and other materials used in reactor structural support components and drive mechanisms. In addition, examination of these materials will also be used to determine accident time-temperature histories in various regions of the core. Procedures for removing the reactor vessel head and reactor core are presented

PRTR ion exchange vault water removal

International Nuclear Information System (INIS)

Ham, J.E.

1995-11-01

This report documents the removal of radiologically contaminated water from the Plutonium Recycle Test Reactor (PRTR) ion exchange vault. Approximately 57,000 liters (15,000 gallons) of water had accumulated in the vault due to the absence of a rain cover. The water was removed and the vault inspected for signs of leakage. No evidence of leakage was found. The removal and disposal of the radiologically contaminated water decreased the risk of environmental contamination

Seasonal soybean crop reflectance

Science.gov (United States)

Lemaster, E. W. (Principal Investigator); Chance, J. E.

1983-01-01

Data are presented from field measurements of 1980 including 5 acquisitions of handheld radiometer reflectance measurements, 7 complete sets of parameters for implementing the Suits mode, and other biophysical parameters to characterize the soybean canopy. LANDSAT calculations on the simulated Brazilian soybean reflectance are included along with data collected during the summer and fall on 1981 on soybean single leaf optical parameters for three irrigation treatments. Tests of the Suits vegetative canopy reflectance model for the full hemisphere of observer directions as well as the nadir direction show moderate agreement for the visible channels of the MSS and poor agreement in the near infrared channel. Temporal changes in the spectral characteristics of the single leaves were seen to occur as a function of maturity which demonstrates that the absorptance of a soybean single leaf is more a function of thetransmittancee characteristics than the seasonally consistent single leaf reflectance.

Electro-coagulation-flotation process for algae removal

International Nuclear Information System (INIS)

Gao Shanshan; Yang Jixian; Tian Jiayu; Ma Fang; Tu Gang; Du Maoan

2010-01-01

Algae in surface water have been a long-term issue all over the world, due to their adverse influence on drinking water treatment process as well as drinking water quality. The algae removal by electro-coagulation-flotation (ECF) technology was investigated in this paper. The results indicated that aluminum was an excellent electrode material for algae removal as compared with iron. The optimal parameters determined were: current density = 1 mA/cm 2 , pH = 4-7, water temperature = 18-36 deg. C, algae density = 0.55 x 10 9 -1.55 x 10 9 cells/L. Under the optimal conditions, 100% of algae removal was achieved with the energy consumption as low as 0.4 kWh/m 3 . The ECF performed well in acid and neutral conditions. At low initial pH of 4-7, the cell density of algae was effectively removed in the ECF, mainly through the charge neutralization mechanism; while the algae removal worsened when the pH increased (7-10), and the main mechanism shifted to sweeping flocculation and enmeshment. The mechanisms for algae removal at different pH were also confirmed by atomic force microscopy (AFM) analysis. Furthermore, initial cell density and water temperature could also influence the algae removal. Overall, the results indicated that the ECF technology was effective for algae removal, from both the technical and economical points of view.

Biology Reflective Assessment Curriculum

Science.gov (United States)

Bayley, Cheryl Ann

Often students and educators view assessments as an obligation and finality for a unit. In the current climate of high-stakes testing and accountability, the balance of time, resources and emphasis on students' scores related to assessment have been slanted considerably toward the summative side. This tension between assessment for accountability and assessment to inform teaching strains instruction and educators' ability to use that information to design learning opportunities that help students develop deeper conceptual understanding. A substantive body of research indicates that formative and reflective assessment can significantly improve student learning. Biology Reflective Assessment Curriculum (BRAC) examines support provided for high school science students through assessment practices. This investigation incorporates the usage of reflective assessments as a guiding practice for differentiated instruction and student choice. Reflective assessment is a metacognitive strategy that promotes self-monitoring and evaluation. The goals of the curriculum are to promote self-efficacy and conceptual understanding in students learning biology through developing their metacognitive awareness. BRAC was implemented in a high school biology classroom. Data from assessments, metacognitive surveys, self-efficacy surveys, reflective journals, student work, a culminating task and field notes were used to evaluate the effectiveness of the curriculum. The results suggest that students who develop their metacognitive skills developed a deeper conceptual understanding and improved feelings of self-efficacy when they were engaged in a reflective assessment unit embedded with student choice. BRAC is a tool for teachers to use assessments to assist students in becoming metacognitive and to guide student choice in learning opportunities.

Removal of boron (B) from waste liquors.

Science.gov (United States)

Jiang, J Q; Xu, Y; Simon, J; Quill, K; Shettle, K

2006-01-01

This paper explores the use of electrocoagulation to remove boron from waste effluent in comparison with alum coagulation. In treating model test wastes, greater boron removals were achieved with electrocoagulation at low doses than conventional alum coagulation when reaction was undertaken for the same conditions (pH 8.5, and initial boron concentration was 500 mg/L). Al electrocoagulation can achieve good boron removal performance (68.3%) at a dose of 2.1 (as molar ratio of Al:B, and for current density of 62.1 A/m2), while alum coagulation can only achieve the maximum boron removal of 56% at a dose of 2.4. Also, Al electrocoagulation can remove 15-20% more boron than alum coagulation for the same dose compared in the treatment of both model test wastes and industry effluent. The estimation of running costs shows that to achieve 75% boron removal from industry waste effluent, i.e. removing 150 g of boron from 1 m3 of effluent, electrocoagulation was 6.2 times cheaper than alum coagulation. The economic advantage of electrocoagulation in the treatment of boron-containing waste effluent is thus significant.

Students’ Learning through Reflective Journaling

Directory of Open Access Journals (Sweden)

Alvyda Liuolienė

2011-04-01

Full Text Available The aim of the article is to get acquainted with the types of journals used in education to help students to learn. The paper presents some ways of fostering student’s learning through reflective journaling. It also describes the key aspects of a new method ARRIVE cycle in connection with teachers preparation to use reflective journals in a classroom. The article also presents self-assessment in reflective journaling and students’ need to self-evaluate their learning process. Reflective journaling as central to students’ self-evaluation is described as a means of fostering metacognition.

Habitat‐ and rainfall‐dependent biodiversity responses to cattle removal in an arid woodland–grassland environment.

Science.gov (United States)

Frank, Anke S K; Wardle, Glenda M; Dickman, Chris R; Greenville, Aaron C

Biodiversity conservation in rangeland environments is often addressed by removing livestock, but inconsistent responses by biota mean that the efficacy of this form of management is hotly debated. Reasons for this inconsistency include the usually short duration and small spatial scale of manipulations compared to the area of grazing properties, as well as divergent responses amongst biota. In low-productivity arid environments, the pulse-reserve dynamic also complicates the outcome of manipulations. Here, we tested and extended these ideas in a heterogeneous desert environment in central Australia that consists of small patches of open woodland (gidgee) in a grassland (spinifex) matrix. Taking advantage of a controlled property-scale removal of cattle, and a rain event that stimulated productivity, we first quantified differences in the vegetation and small vertebrates of these two habitats, and then tracked the diversity, composition, and abundance of these biota for 6–19 months post-rain. We predicted that the two habitats would differ in the structure, composition, and reproductive output of their constituent plant species. We predicted also that the effects of cattle removal would interact with these habitat differences, with the abundance, richness, and diversity of small mammals and reptiles differing across habitats and grazing treatments. As anticipated, plant species composition in woodland was distinct from that in grassland and varied over time. The effects of cattle removal were habitat specific: Plant composition responded to de-stocking in woodland, but not in grassland; flowers were more abundant, and palatable plant cover also was greater following cessation of grazing pressure. The responses of small mammals but not reptiles showed some accord with our predictions, varying over time but inconsistently with treatment, and perhaps reflected high variability in capture success. We conclude that the timing and length of sampling are important when

Dissenting in Reflective Conversations

DEFF Research Database (Denmark)

Bjørn, Pernille; Boulus, Nina

2011-01-01

Reflective monitoring of research practices is essential. However, we often lack formal training in the practices of doing action research, and descriptions of actual inquiry practice are seldom included in publications. Our aim is to provide a glimpse of self-reflective practices based on our...

Enhancing Self-Practice/Self-Reflection (SP/SR) approach to cognitive behaviour training through the use of reflective blogs.

Science.gov (United States)

Farrand, Paul; Perry, Jon; Linsley, Sue

2010-07-01

Self-Practice/Self-Reflection (SP/SR) is increasingly beginning to feature as a central component of CBT training programmes (Bennett-Levy et al., 2001). Programmes including a reflective element, however, are not unproblematic and it has been documented that simply setting time aside for reflection does not necessarily result in trainees using such time to reflect. Such limitations may be overcome by including a requirement to post reflections on reflective blogs. To examine the effect that a requirement to contribute to a reflective blog had upon a SP/SR approach to CBT training. A focus group methodology was adopted with data analyzed using a general inductive qualitative approach. The requirement to use blogs to reflect upon the self-practice of CBT techniques enhanced SP/SR, established a learning community, and improved course supervision, although some technical difficulties arose. Consideration should be given towards using reflective blogs to support a SP/SR approach to CBT training. Benefits afforded by the use of reflective blogs further establish SP/SR as a valid and flexible training approach.

Assessment of the removal of estrogenicity in biological nutrient removal wastewater treatment processes

International Nuclear Information System (INIS)

Ogunlaja, O.O.; Parker, W.J.

2015-01-01

The removal of estrogenicity in a University of Cape Town-biological nutrient removal (UCT-BNR) wastewater treatment process was investigated using pilot and bench scale systems, batch experiments and mathematical modeling. In the pilot BNR process, 96 ± 5% of the estrogenicity exerted by the influent wastewater was removed by the treatment process. The degradation efficiencies in the anaerobic, anoxic and aerobic zones of the pilot BNR bioreactor were 11 ± 9%, 18 ± 2% and 93 ± 10%, respectively. In order to further understand the performance of the BNR process in the removal of estrogenicity from wastewater, a bench scale BNR process was operated with synthetic wastewater dosed with E1 and E2. The removal of estrogenicity in the bench scale system (95 ± 5%) was comparable to the pilot BNR process and the degradation efficiencies were estimated to be 8 ± 0.8%, 38 ± 4% and 85 ± 22% in the anaerobic, anoxic and aerobic zones, respectively. A biotransformation model developed to predict the fate of E1 and E2 in batch tests using the sludge from the BNR process was calibrated using the data from the experiments. The biotransformation rate constants for the transformation of E2 to E1 were estimated as 71 ± 1.5, 31 ± 3.3 and 1 ± 0.9 L g COD −1 d −1 for the aerobic, anoxic and anaerobic batch tests, respectively, while the corresponding biotransformation rate constants for the transformation of E1 were estimated to be 7.3 ± 1.0, 3 ± 2.0, and 0.85 ± 0.6 L·g COD −1 d −1 . A steady state mass balance model formulated to describe the interactions between E2 and E1 in BNR activated sludge reasonably described the fate of E1 and E2 in the BNR process. - Highlights: • Comparable estrogenicity removal was observed from two BNR processes. • Pseudo first order model described the transformation of E2 and E1 in BNR process. • Biotransformation of E1 in BNR activated sludge controls the degradation of E2

Assessment of the removal of estrogenicity in biological nutrient removal wastewater treatment processes

Energy Technology Data Exchange (ETDEWEB)

Ogunlaja, O.O., E-mail: oogunlaj@uwaterloo.ca; Parker, W.J., E-mail: wjparker@uwaterloo.ca

2015-05-01

The removal of estrogenicity in a University of Cape Town-biological nutrient removal (UCT-BNR) wastewater treatment process was investigated using pilot and bench scale systems, batch experiments and mathematical modeling. In the pilot BNR process, 96 ± 5% of the estrogenicity exerted by the influent wastewater was removed by the treatment process. The degradation efficiencies in the anaerobic, anoxic and aerobic zones of the pilot BNR bioreactor were 11 ± 9%, 18 ± 2% and 93 ± 10%, respectively. In order to further understand the performance of the BNR process in the removal of estrogenicity from wastewater, a bench scale BNR process was operated with synthetic wastewater dosed with E1 and E2. The removal of estrogenicity in the bench scale system (95 ± 5%) was comparable to the pilot BNR process and the degradation efficiencies were estimated to be 8 ± 0.8%, 38 ± 4% and 85 ± 22% in the anaerobic, anoxic and aerobic zones, respectively. A biotransformation model developed to predict the fate of E1 and E2 in batch tests using the sludge from the BNR process was calibrated using the data from the experiments. The biotransformation rate constants for the transformation of E2 to E1 were estimated as 71 ± 1.5, 31 ± 3.3 and 1 ± 0.9 L g COD{sup −1} d{sup −1} for the aerobic, anoxic and anaerobic batch tests, respectively, while the corresponding biotransformation rate constants for the transformation of E1 were estimated to be 7.3 ± 1.0, 3 ± 2.0, and 0.85 ± 0.6 L·g COD{sup −1} d{sup −1}. A steady state mass balance model formulated to describe the interactions between E2 and E1 in BNR activated sludge reasonably described the fate of E1 and E2 in the BNR process. - Highlights: • Comparable estrogenicity removal was observed from two BNR processes. • Pseudo first order model described the transformation of E2 and E1 in BNR process. • Biotransformation of E1 in BNR activated sludge controls the degradation of E2.

Arbitrary precision value overlay and alignment system by double positioning of mask and wafer and electronic datum and nano sensor (notice of removal)

Science.gov (United States)

Bear, Wynn L.; Xiong, Xiang-Wen

2009-03-01

This paper (SPIE Paper 727249) was removed from the SPIE Digital Library on 30 April 2009 upon learning that the two names associated with this publication record, Xiang-Wen Xiong and Wynn L. Bear, are actually the same individual and not two different authors. This is not sanctioned by SPIE. As stated in the SPIE Guidelines for Professional Conduct and Publishing Ethics, "SPIE considers it the professional responsibility of all authors to ensure that the authorship of submitted papers properly reflects the contributions and consent of all authors." A serious violation of these guidelines is evident in this case. It is SPIE policy to remove papers from the SPIE Digital Library where serious professional misconduct has occurred and to impose additional sanctions as appropriate.

[Removable partial dentures. Oral functions and types].

Science.gov (United States)

Creugers, N H J; de Baat, C

2009-11-01

A removable partial denture enables the restoration or improvement of 4 oral functions: aesthetics, mandibular stability, mastication, and speech. However, wearing a removable partial denture should not cause oral comfort to deteriorate. There are 3 types of removable partial dentures: acrylic tissue-supported dentures, dentures with cast metal frameworks en dentures with cast metal frameworks and (semi)precision attachments. Interrupted tooth arches,free-ending tooth arches, and a combination of interrupted as well as free-ending tooth arches can be restored using these dentures. Well-known disadvantages of removable partial dentures are problematic oral hygiene, negative influence on the remaining dentition and limited oral comfort. Due to the advanced possibilities of fixed tooth- or implant-supported partial dentures, whether or not free-ending, or tooth- as well as implant-supported partial dentures, the indication of removable partial dentures is restricted. Nevertheless, for the time being the demand for removable partial dentures is expected to continue.

Spent Nuclear Fuel (SNF) Removal Campaign Plan

International Nuclear Information System (INIS)

PAJUNEN, A.L.

2000-01-01

The overall operation of the Spent Nuclear Fuel Project will include fuel removal, sludge removal, debris removal, and deactivation transition activities. Figure 1-1 provides an overview of the current baseline operating schedule for project sub-systems, indicating that a majority of fuel removal activities are performed over an approximately three-and-one-half year time period. The purpose of this document is to describe the strategy for operating the fuel removal process systems. The campaign plan scope includes: (1) identifying a fuel selection sequence during fuel removal activities, (2) identifying MCOs that are subjected to extra testing (process validation) and monitoring, and (3) discussion of initial MCO loading and monitoring in the Canister Storage Building (CSB). The campaign plan is intended to integrate fuel selection requirements for handling special groups of fuel within the basin (e.g., single pass reactor fuel), process validation activities identified for process systems, and monitoring activities during storage

Mass removal modes in the laser ablation of silicon by a Q-switched diode-pumped solid-state laser (DPSSL)

International Nuclear Information System (INIS)

Lim, Daniel J; Ki, Hyungson; Mazumder, Jyoti

2006-01-01

A fundamental study on the Q-switched diode-pumped solid-state laser interaction with silicon was performed both experimentally and numerically. Single pulse drilling experiments were conducted on N-type silicon wafers by varying the laser intensity from 10 8 -10 9 W cm -2 to investigate how the mass removal mechanism changes depending on the laser intensity. Hole width and depth were measured and surface morphology was studied using scanning electron microscopy. For the numerical model study, Ki et al's self-consistent continuous-wave laser drilling model (2001 J. Phys. D: Appl. Phys. 34 364-72) was modified to treat the solidification phenomenon between successive laser pulses. The model has the capabilities of simulating major interaction physics, such as melt flow, heat transfer, evaporation, homogeneous boiling, multiple reflections and surface evolution. This study presents some interesting results on how the mass removal mode changes as the laser intensity increases

Spray removal of fission products in PWR containments

International Nuclear Information System (INIS)

Grist, D.R.

1982-11-01

Models and parameters for assessing the rate and extent of removal of various fission product species are described. A range of droplet sizes and of spray additive options is considered and removal of vapour phase inorganic iodine species, of organic iodides and of aerosols containing fission products is discussed. Aerosol removal is assessed in terms of contributing removal mechanisms and the removal rate modelled as a function of the radius of the aerosol particulate species. (author)

Residual Heat Removal System qualitative probabilistic safety analysis before and after auto closure interlock removal

International Nuclear Information System (INIS)

Mikulicic, V.; Simic, Z.

1992-01-01

The analysis evaluates the consequences of the removal of the auto closure interlock (ACI) on the Residual Heat Removal System (RHRS) suction/isolation valves at the nuclear power plant. The deletion of the RHRS ACI is in part based on a probabilistic safety analysis (PSA) which justifies the removal based on a criterion of increased availability and reliability. Three different areas to be examined in PSA: the likelihood of an interfacing system LOCA; RHRS availability and reliability; and low temperature overpressurization control. The paper emphasizes particularly the RHRS unavailability and reliability evaluation utilizing the current control circuitry configuration and then with the proposed modification to the control circuitry. (author)

Appropriate drinking water treatment processes for organic micropollutants removal based on experimental and model studies - A multi-criteria analysis study

KAUST Repository

Sudhakaran, Sairam

2013-01-01

The presence of organic micropollutants (OMPs), pharmaceuticals and personal care products (PPCPs) in potable water is of great environmental and public health concern. OMPs are included in the priority list of contaminants in United States EPA and European framework directives. Advanced treatment processes such as reverse osmosis, nanofiltration, ozonation and adsorption are the usual industry-recommended processes for OMPs removal, however, natural systems, e.g., riverbank filtration and constructed wetlands, are also potentially efficient options for OMPs removal. In this study, a decision support system (DSS) based on multi-criteria analysis (MCA) was created to compare processes for OMPs removal under various criteria. Multi-criteria analysis (MCA), a transparent and reliable procedure, was adopted. Models were built for both experimental and predicted percent-removals for a range of OMPs reflecting different physicochemical properties. The experimental percent-removals for several processes (riverbank filtration (RBF), ozonation, advanced oxidation, adsorption, reverse osmosis, and nanofiltration) were considered. The predicted percent-removals were taken from validated quantitative structure activity relationship (QSAR) models. Analytical methods to detect OMPs in water are very laborious, thus a modeling approach such as QSAR is an attractive option.A survey among two groups of participants including academics (PhD students and post-doctoral research associates) and industry (managers and operators) representatives was conducted to assign weights for the following criteria: treatability, costs, technical considerations, sustainability and time. The process rankings varied depending on the contaminant species and personal preferences (weights). The results indicated that RBF and oxidation were preferable over adsorption and membranes processes. The results also suggest that the use of a hybrid treatment process, e.g., combining a natural system with an

Autotrophic nitrogen removal process in a potable water treatment biofilter that simultaneously removes Mn and NH4(+)-N.

Science.gov (United States)

Cai, Yan'an; Li, Dong; Liang, Yuhai; Zeng, Huiping; Zhang, Jie

2014-11-01

Ammonia (NH4(+)-N) removal pathways were investigated in a potable water treatment biofilter that simultaneously removes manganese (Mn) and NH4(+)-N. The results indicated a significant loss of nitrogen in the biofilter. Both the completely autotrophic nitrogen removal over nitrite (CANON) process and nitrification were more likely to contribute to NH4(+)-N removal. Moreover, the model calculation results demonstrated that the CANON process contributed significantly to the removal of NH4(+)-N. For influent NH4(+)-N levels of 1.030 and 1.749mg/L, the CANON process contribution was about 48.5% and 46.6%, respectively. The most important finding was that anaerobic ammonia oxidation (ANAMMOX) bacteria were detectable in the biofilter. It is interesting that the CANON process was effective even for such low NH4(+)-N concentrations. Copyright © 2014 Elsevier Ltd. All rights reserved.

An Efficient and Robust Moving Shadow Removal Algorithm and Its Applications in ITS

Directory of Open Access Journals (Sweden)

Shou Yu-Wen

2010-01-01

Full Text Available We propose an efficient algorithm for removing shadows of moving vehicles caused by non-uniform distributions of light reflections in the daytime. This paper presents a brand-new and complete structure in feature combination as well as analysis for orientating and labeling moving shadows so as to extract the defined objects in foregrounds more easily in each snapshot of the original files of videos which are acquired in the real traffic situations. Moreover, we make use of Gaussian Mixture Model (GMM for background removal and detection of moving shadows in our tested images, and define two indices for characterizing non-shadowed regions where one indicates the characteristics of lines and the other index can be characterized by the information in gray scales of images which helps us to build a newly defined set of darkening ratios (modified darkening factors based on Gaussian models. To prove the effectiveness of our moving shadow algorithm, we carry it out with a practical application of traffic flow detection in ITS (Intelligent Transportation System—vehicle counting. Our algorithm shows the faster processing speed, 13.84 ms/frame, and can improve the accuracy rate in 4%~10% for our three tested videos in the experimental results of vehicle counting.

Tritium Removal from Carbon Plasma Facing Components

International Nuclear Information System (INIS)

Skinner, C.H.; Coad, J.P.; Federici, G.

2003-01-01

Tritium removal is a major unsolved development task for next-step devices with carbon plasma-facing components. The 2-3 order of magnitude increase in duty cycle and associated tritium accumulation rate in a next-step tokamak will place unprecedented demands on tritium removal technology. The associated technical risk can be mitigated only if suitable removal techniques are demonstrated on tokamaks before the construction of a next-step device. This article reviews the history of codeposition, the tritium experience of TFTR (Tokamak Fusion Test Reactor) and JET (Joint European Torus) and the tritium removal rate required to support ITER's planned operational schedule. The merits and shortcomings of various tritium removal techniques are discussed with particular emphasis on oxidation and laser surface heating

Sulphate Removal from Water by Carbon Residue from Biomass Gasification: Effect of Chemical Modification Methods on Sulphate Removal Efficiency

Directory of Open Access Journals (Sweden)

Hanna Runtti

2016-02-01

Full Text Available Sulphate removal from mine water is a problem because traditional chemical precipitation does not remove all sulphates. In addition, it creates lime sediment as a secondary waste. Therefore, an inexpensive and environmental-friendly sulphate removal method is needed in addition to precipitation. In this study, carbon residues from a wood gasification process were repurposed as precursors to a suitable sorbent for SO42- ion removal. The raw material was modified using ZnCl2, BaCl2, CaCl2, FeCl3, or FeCl2. Carbon residues modified with FeCl3 were selected for further consideration because the removal efficiency toward sulphate was the highest. Batch sorption experiments were performed to evaluate the effects of the initial pH, initial SO42- ion concentration, and contact time on sulphate removal. The removal of SO42- ions using Fe-modified carbon residue was notably higher compared with unmodified carbon residue and commercially available activated carbon. The sorption data exhibited pseudo-second-order kinetics. The isotherm analysis indicated that the sorption data of Fe-modified carbon residues can be represented by the bi-Langmuir isotherm model.

Validating the Persian Version of Reflective Thinking Questionnaire and Probing Iranian University Students' Reflective Thinking and Academic Achievement

Directory of Open Access Journals (Sweden)

Afsaneh Ghanizadeh

2017-07-01

Full Text Available Scholars in higher education deem reflective thinking as integral to the development of professional disciplinary practices. One of the major issues in studying reflective thinking pivots around its conceptualization and assessment. Over the years, researchers have used several methods and scales to measure reflective thinking. One of the most widely known scales of reflective thinking was constructed and validated by Kember et al. (2000. It is entitled 'Reflective Thinking Questionnaire (RTQ' and includes 16 items measuring four types of reflective thinking: understanding (UND; reflection (REF; critical reflection (CREF; habitual action (HA. The present study aimed at validating the Persian version of RTQ among one hundred ninety six English as a foreign language (EFL university students. It then scrutinized the role of reflective thinking in academic achievements measured by grade point average (GPA. The association of learners' reflective thinking style with their educational level and gender was also estimated. To conduct the research, the scale was first translated into Persian and its validity (computed via confirmatory factor analysis, convergent, and divergent validity estimates and reliability (computed via Cronbach's alpha were substantiated. It was indicated that among the comprising factors of reflective thinking, UND received the highest mean followed by REF and CREF

Reflection-Based Learning for Professional Ethical Formation.

Science.gov (United States)

Branch, William T; George, Maura

2017-04-01

One way practitioners learn ethics is by reflecting on experience. They may reflect in the moment (reflection-in-action) or afterwards (reflection-on-action). We illustrate how a teaching clinician may transform relationships with patients and teach person-centered care through reflective learning. We discuss reflective learning pedagogies and present two case examples of our preferred method, guided group reflection using narratives. This method fosters moral development alongside professional identity formation in students and advanced learners. Our method for reflective learning addresses and enables processing of the most pressing ethical issues that learners encounter in practice. © 2017 American Medical Association. All Rights Reserved.

Tattoo removal with ingenol mebutate

Directory of Open Access Journals (Sweden)

Cozzi SJ

2017-05-01

Full Text Available Sarah-Jane Cozzi,1 Thuy T Le,1 Steven M Ogbourne,2 Cini James,1 Andreas Suhrbier1 1Inflammation Biology Laboratory, QIMR Berghofer Medical Research Institute, Brisbane, 2Genecology Research Center, Faculty of Science, Health, Engineering and Education, University of the Sunshine Coast, Maroochydore DC, QLD, Australia Abstract: An increasing number of people are getting tattoos; however, many regret the decision and seek their removal. Lasers are currently the most commonly used method for tattoo removal; however, treatment can be lengthy, costly, and sometimes ineffective, especially for certain colors. Ingenol mebutate is a licensed topical treatment for actinic keratoses. Here, we demonstrate that two applications of 0.1% ingenol mebutate can efficiently and consistently remove 2-week-old tattoos from SKH/hr hairless mice. Treatment was associated with relocation of tattoo microspheres from the dermis into the posttreatment eschar. The skin lesion resolved about 20 days after treatment initiation, with some cicatrix formation evident. The implications for using ingenol mebutate for tattoo removal in humans are discussed. Keywords: tattoo, ingenol mebutate, mouse 

Use of explosives in pipeline construction work

Energy Technology Data Exchange (ETDEWEB)

Ball, M J

1976-08-01

Explosives are an essential tool in Great Britain's pipeline-construction industry, with applications on dry land and under water, in trench blasting and tunneling for road and service crossings, demolition of unwanted sections, and removal of coatings. Nobels Explosive Co. Ltd. describes basic explosives operations as pertaining to the requirements of rock trenching, submarine operations, thrust-bore and tunneling operations, demolitions, and precision blasting.

Cooling water treatment for heavy water project (Paper No. 6.9)

International Nuclear Information System (INIS)

Valsangkar, H.N.

1992-01-01

With minor exceptions, water is the preferred industrial medium for the removal of unwanted heat from process systems. The application of various chemical treatments is required to protect the system from water related and process related problems of corrosion, scale and deposition and biofouling. The paper discusses the cooling water problems for heavy water industries along with the impact caused by associated fertilizer units. (author). 6 figs

Analytic Reflected Lightcurves for Exoplanets

Science.gov (United States)

Haggard, Hal M.; Cowan, Nicolas B.

2018-04-01

The disk-integrated reflected brightness of an exoplanet changes as a function of time due to orbital and rotational motion coupled with an inhomogeneous albedo map. We have previously derived analytic reflected lightcurves for spherical harmonic albedo maps in the special case of a synchronously-rotating planet on an edge-on orbit (Cowan, Fuentes & Haggard 2013). In this letter, we present analytic reflected lightcurves for the general case of a planet on an inclined orbit, with arbitrary spin period and non-zero obliquity. We do so for two different albedo basis maps: bright points (δ-maps), and spherical harmonics (Y_l^m-maps). In particular, we use Wigner D-matrices to express an harmonic lightcurve for an arbitrary viewing geometry as a non-linear combination of harmonic lightcurves for the simpler edge-on, synchronously rotating geometry. These solutions will enable future exploration of the degeneracies and information content of reflected lightcurves, as well as fast calculation of lightcurves for mapping exoplanets based on time-resolved photometry. To these ends we make available Exoplanet Analytic Reflected Lightcurves (EARL), a simple open-source code that allows rapid computation of reflected lightcurves.

Which trees should be removed in thinning?

Directory of Open Access Journals (Sweden)

Timo Pukkala

2015-12-01

Full Text Available Background: In economically optimal management, trees that are removed in a thinning treatment should be selected on the basis of their value, relative value increment and the effect of removal on the growth of remaining trees. Large valuable trees with decreased value increment should be removed, especially when they overtop smaller trees. Methods: This study optimized the tree selection rule in the thinning treatments of continuous cover management when the aim is to maximize the profitability of forest management. The weights of three criteria (stem value, relative value increment and effect of removal on the competition of remaining trees were optimized together with thinning intervals. Results and conclusions: The results confirmed the hypothesis that optimal thinning involves removing predominantly large trees. Increasing stumpage value, decreasing relative value increment, and increasing competitive influence increased the likelihood that removal is optimal decision. However, if the spatial distribution of trees is irregular, it is optimal to leave large trees in sparse places and remove somewhat smaller trees from dense places. However, the benefit of optimal thinning, as compared to diameter limit cutting is not usually large in pure one-species stands. On the contrary, removing the smallest trees from the stand may lead to significant (30–40 % reductions in the net present value of harvest incomes. Keywords: Continuous cover forestry, Tree selection, High thinning, Optimal management, Spatial distribution, Spatial growth model

Reflection measurements for luminescent powders

Science.gov (United States)

Kroon, R. E.

2018-04-01

Luminescent materials are useful in applications varying from lighting and display technologies to document security features and medical research, amongst many others. Measurement of the excitation range is an important consideration, and absorption bands are often determined from a decrease in the measured diffuse reflectance of the material using a ultraviolet-visible (UV-vis) spectrophotometer with an integrating sphere. Such a system may provide questionable results when used to measure the reflectance of a luminescence material, which is demonstrated for a Tb doped silica phosphor, because the system cannot differentiate between the reflected light and luminescence. It is shown that more reliable results are achieved for this phosphor by measuring the reflectance using a synchronous zero-offset scan in a fluorescence spectrometer equipped with an integrating sphere. This method is therefore recommended instead of traditional reflectance measurements using a UV-vis spectrophotometer for luminescent powders.

Removal of eutrophication factors and heavy metal from a closed cultivation system using the macroalgae, Gracilaria sp. (Rhodophyta)

Science.gov (United States)

Kang, Kyoung Ho; Sui, Zhenghong

2010-11-01

In this study, the ability of macroalgae Gracilaria sp. of removing eutrophication factors and toxic heavy metals Al, Cr, and Zn in a closed cultivation system is reported. The results show that the concentration of the three heavy metals decreased significantly during the experimental period in an algal biomass dependent manner. The biofiltration capacity of the alga for Al, Cr, and Zn is 10.1%-72.6%, 52.5%-83.4% and 36.5%-91.7%, respectively. Using more materials resulted in stronger heavy metal removal. Additionally, the concentration of chl- a, TN, TP and DIN of water samples from aquariums involving large, medium, and small algal biomass cultivation increased first and then decreased during the experiment. COD value of all three groups decreased with time and displayed algal biomass dependency: more algae resulting in a greater COD value than those of less biomass. Furthermore, changes in COD reflect an obvious organic particles deprivation process of algae. This is the first report on heavy metal removal effect by Gracilaria species. The results suggest that macroalgae can be used as a biofilter for the treatment of nutrient-enriched or heavy-metal polluted water, to which an appropriate time range should be carefully determined.

Nuclear reactor auxiliary heat removal system

International Nuclear Information System (INIS)

Thompson, R.E.; Pierce, B.L.

1977-01-01

An auxiliary heat removal system to remove residual heat from gas-cooled nuclear reactors is described. The reactor coolant is expanded through a turbine, cooled in a heat exchanger and compressed by a compressor before reentering the reactor coolant. The turbine powers both the compressor and the pump which pumps a second fluid through the heat exchanger to cool the reactor coolant. A pneumatic starter is utilized to start the turbine, thereby making the auxiliary heat removal system independent of external power sources

Iron removal using an aerated granular filter

Energy Technology Data Exchange (ETDEWEB)

Cho, B.Y. [Dongguk University, Seoul (Republic of Korea). College of Engineering

2005-10-01

Laboratory scale experiments concerning iron removal from artificial raw water by an artificial filter using anthracite as filter media were conducted. The major findings were that iron oxidation and removal by an aerated filter is mainly a catalytic chemical reaction rather than a biological reaction. Further, iron removal does not perform effectively without aeration. Iron removal was very effective when the pH was weakly acidity. Iron oxide attached to the surface of the media is identified as ferrihydrite, which catalyzes the oxidation of iron as shown by Moessbauer spectra analysis.

Laparoscopic Removal of Gossypiboma

Directory of Open Access Journals (Sweden)

Zeki Özsoy

2015-01-01

Full Text Available Gossypiboma is defined as a mass caused by foreign body reaction developed around the retained surgical item in the operative area. When diagnosed, it should be removed in symptomatic patients. Minimal invasive surgery should be planned for the removal of the retained item. The number of cases treated by laparoscopic approach is rare in the literature. We present a case of forty-year-old woman referred to emergency room with acute abdomen diagnosed as gossypiboma and treated successfully with laparoscopic surgery.

Electrokinetic removal of salt from brick masonry

DEFF Research Database (Denmark)

Ottosen, Lisbeth M.; Pedersen, Anne Juul; Rörig-Dalgaard, Inge

2006-01-01

A method to effectively remove salts from masonry is lacking. The present study aims at determining the removal efficiency of salts from bricks in an applied low current electric DC field. At first an investigation on removal of NaCl and Na(NO3)2 from spiked bricks in laboratory scale was conducted...

Improving Inquiry Teaching through Reflection on Practice

Science.gov (United States)

Lotter, Christine R.; Miller, Cory

2017-08-01

In this paper, we explore middle school science teachers' learning of inquiry-based instructional strategies through reflection on practice teaching sessions during a summer enrichment program with middle level students. The reflection sessions were part of a larger year-long inquiry professional development program in which teachers learned science content and inquiry pedagogy. The program included a 2-week summer institute in which teachers participated in science content sessions, practice teaching to middle level students, and small group-facilitated reflection sessions on their teaching. For this study, data collection focused on teachers' recorded dialogue during the facilitator - run reflection sessions, the teachers' daily written reflections, a final written reflection, and a written reflection on a videotaped teaching session. We investigated the teachers' reflection levels and the themes teachers focused on during their reflection sessions. Teachers were found to reflect at various reflection levels, from simple description to a more sophisticated focus on how to improve student learning. Recurrent themes point to the importance of providing situated learning environments, such as the practice teaching with immediate reflection for teachers to have time to practice new instructional strategies and gain insight from peers and science educators on how to handle student learning issues.

Reflective ‘cool’ roofs under aerosol-burdened skies: radiative benefits across selected Indian cities

International Nuclear Information System (INIS)

Millstein, D E; Fischer, M L

2014-01-01

The use of reflective surfaces offers one low-cost solution for reducing solar loading to urban environments and the Earth that should be considered as part of sustainable urban design. Here, we characterize the radiative benefits, i.e. the additional shortwave radiation leaving the atmosphere, from the installation of highly reflective ‘cool’ roofs in urban areas in India that face relatively large local aerosol burdens. We use a previously tested column radiative transfer model to estimate the energy per unit area reflected to space from increasing the surface albedo at six cities within India. The model is used to characterize radiative transfer each day over five years (2008–2012) based on mid-day satellite retrievals of MODIS aerosol depth, cloud water path, and average surface albedo and MERRA atmospheric profiles of temperature and composition. Compared against ten months of field observations in two cities, the model derived incoming surface shortwave radiation estimates relative to observations show small biases (0.5% and −2.6%, at Pantnagar and Nainital, respectively). Despite the high levels of local aerosols we found cool roofs provided significant radiative benefits at all locations. Averaged over the five year period we found that increasing the albedo of 1 m 2 of roof area by 0.5 would reflect to space 0.9–1.2 kWh daily from 08:30–15:30 LST, depending on location. This is equivalent to a constant forcing of 37–50 W m −2 (equivalent to reducing CO 2 emissions by 74 to 101 kg CO 2 m −2 roof area). Last, we identify a co-benefit of improving air quality, in that removing aerosols from the atmosphere could increase the radiative benefits from cool roofs by 23–74%, with the largest potential increase found at Delhi and the smallest change found at Nainital. (letter)

Removing Pubic Hair (For Young Men)

Science.gov (United States)

... who has experience with performing laser hair removal. Electrolysis: Electrolysis is the only hair removal method that permanently ... using slow strokes. Rinse your skin with warm water after you are done shaving and then pat ...

33 CFR 157.170 - COW equipment: Removal.

Science.gov (United States)

2010-07-01

... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false COW equipment: Removal. 157.170... Crude Oil Washing (COW) System on Tank Vessels Cow Operations § 157.170 COW equipment: Removal. (a) Whenever a deck mounted COW machine is removed from the tank, the master shall ensure that: (1) The supply...

40 CFR 211.214 - Removal of label.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 24 2010-07-01 2010-07-01 false Removal of label. 211.214 Section 211... PRODUCT NOISE LABELING Hearing Protective Devices § 211.214 Removal of label. Section 10(a)(4) of the Act prohibits any person from removing, prior to sale, any label required by this subpart, by either physical...

Investigation of Removal Efficiency of Nano Sized Alumina for Removal of Acid Red 18 from Aqueous Solutions

Directory of Open Access Journals (Sweden)

M.H. Dehghani

2014-08-01

Full Text Available Background and Objectives: Acid Red 18 dye was one of the Azo colors that are used in textile and dyeing industries. These dyes are often toxic and carcinogenic to humans and the environment as pollution. This study was conducted with the aim of investigating on nano alumina efficiency for removal of Acid Red 18 dye from aqueous solutions. Materials and Methods: This study was carried out in the laboratory scales and effect of The initial concentration of dye (25 to 100 mg/l, pH solution (3, 7, 11, nano alumina concentration (0.1, 0.4, 1, 1.5 g/l and contact time in range 5 to 240 min on dye removal efficiency were evaluated. Also kinetic and isotherm models of adsorption process were evaluated. Results: The high removal efficiency was observed in pH=3, contact time=60 min and Adsorbent concentration of 0.4 g/L. The rate of color removal were 63/24, 50/84 and 20 percent respectively at pH of 3, 7 and 11 for the initial dye concentration of 25 mg/l and 0.4 g/l mass absorbent that showing with increasing pH removal efficiency is reduced. the studied dye absorption isotherm was fitted Langmuir model (R2=0.994 which was 83.33 mg/g for maximum adsorption. The results from kinetic studies showed that removal of the studied dye was best described by pseudo-second order kinetic model (r2=0.999. Conclusion: The present study shows nano alumina powder is promising adsorbent for removal of Acid Red 18 from aqueous solution.

Reflecting on life, not on the mind – The concept of self-reflection without stability

DEFF Research Database (Denmark)

Jensen, Lasse Meinert

This paper presents a critique of the concept of “reflection” and a theoretical alternative. I’ll argue that current notions of reflections to a large extend deals only with “meta-reflection” or “self-reflection”, and that the main problem with such conceptualizations is their preoccupation...... with “stability”. When self-reflection is conceptualized as a second-order process charged with creating diachronic continuity in the person’s life, as it often is in both philosophy (Frankfurt, 1971), cognitive theory (Carver, Scheier & Fulton, 2008), and narrative theories of personality (McAdams, 2008......), “Stability” and how it is brought about, becomes the main concern. But presupposing “stability” as the main aim of self-reflection isolates reflection to a mental realm. Human beings are certainly self-conscious, but – following Dreier (1999), when he points out that reflection is not a distancing from...

Fluoroscopic removal of retrievable self-expandable metal stents in patients with malignant oesophageal strictures: Experience with a non-endoscopic removal system.

Science.gov (United States)