Sample records for remotely controlled cutting

  1. Remote Control Reading.

    Ervin, Helen


    Explains how students who have difficulty remembering what they have read may be taught how to reread sections of text by suggesting to them that reading is analogous to watching a video with the remote control in hand. (TB)



    The basics of remotely controlled sewers [1] are presented focusing on Leipzig Municipality’s sewer control project [2] located in Germany. The consequences of sewer surcharge events are outlined considering possible counter measures. The required data basis, the controllable sewer objects and their relevant control units are pointed out. The presentation is finished exposing the types of control network, possible control algorithms as well as important aspects regarding the decision for / ag...

  3. Survey of technology for decommissioning of nuclear fuel cycle facilities. 8. Remote handling and cutting techniques

    Ogawa, Ryuichiro; Ishijima, Noboru [Japan Nuclear Cycle Development Inst., Oarai, Ibaraki (Japan). Oarai Engineering Center


    In nuclear fuel cycle facility decommissioning and refurbishment, the remote handling techniques such as dismantling, waste handling and decontamination are needed to reduce personnel radiation exposure. The survey research for the status of R and D activities on remote handling tools suitable for nuclear facilities in the world and domestic existing commercial cutting tools applicable to decommissioning of the facilities was conducted. In addition, the drive mechanism, sensing element and control system applicable to the remote handling devices were also surveyed. This report presents brief surveyed summaries. (H. Itami)

  4. Cutting Characteristics of Force Controllable Milling Head

    Shirakashi; Takahiro; Shibuya; Wataru


    In order to control cutting force and its direction i n milling operation, a new milling head was developed. The head has two milling cutters, which are connected by a pair of gears and rotate in opposite direction respectively. Both up-cut and down-cut can be carried out simultaneously by t hese milling cutters. The each depth of cut, the ratio of up/down cutting depth , by these cutters can be also selected. The cutting force characteristics were experimentally discussed by changing the ratio. The cut...

  5. Combining remote ablation cutting and remote welding: opportunities and application areas

    Musiol, Jan; Luetke, Matthias; Schweier, Markus; Hatwig, Jens; Wetzig, Andreas; Beyer, Eckhard; Zaeh, Michael F.


    Remote Ablation Cutting (RAC) is a most promising process for cutting thin metal sheets in the automotive, medical and consumer industry. Characteristically for the RAC are high cutting velocities for metal foils as well as material processing of box structures without spatter contamination at the inner surface. Furthermore, the system technology for RAC can also be used for other processes, like welding and marking. Thereby, the flexibility of a production unit is increased, compared to a conventional cutting system. Despite several advantages, the RAC is not yet state of the art in industrial production. Reasons for that are lacking knowledge in the area of process itself and in possible application areas. In this paper a conceptual model of the ablation and the ejection mechanism is presented. It consists of the laser beam absorption within the processing zone, the melt ejection from the kerf and the resulting spatter formation above the part surface. Besides the model, the process boundaries and limitations are identified using empirical data. Addressing possible applications, the following samples of different industrial areas are introduced to show the potential of the process: Cutting of heat exchanger plates, cylinder head seals, and cathode/anode material for Li-Ion-Batteries. Furthermore, a concept and first results of the combined processing of remote cutting and welding with one laser and one scanner optics are presented.

  6. Wireless Remote Control System

    Adrian Tigauan


    Full Text Available This paper presents the design of a wireless remote control system based on the ZigBee communication protocol. Gathering data from sensors or performing control tasks through wireless communication is advantageous in situations in which the use of cables is impractical. An Atmega328 microcontroller (from slave device is used for gathering data from the sensors and transmitting it to a coordinator device with the help of the XBee modules. The ZigBee standard is suitable for low-cost, low-data-rate and low-power wireless networks implementations. The XBee-PRO module, designed to meet ZigBee standards, requires minimal power for reliable data exchange between devices over a distance of up to 1600m outdoors. A key component of the ZigBee protocol is the ability to support networking and this can be used in a wireless remote control system. This system may be employed e.g. to control temperature and humidity (SHT11 sensor and light intensity (TSL230 sensor levels inside a commercial greenhouse.

  7. Remote control for motor vehicle

    Johnson, Dale R. (Inventor); Ciciora, John A. (Inventor)


    A remote controller is disclosed for controlling the throttle, brake and steering mechanism of a conventional motor vehicle, with the remote controller being particularly advantageous for use by severely handicapped individuals. The controller includes a remote manipulator which controls a plurality of actuators through interfacing electronics. The remote manipulator is a two-axis joystick which controls a pair of linear actuators and a rotary actuator, with the actuators being powered by electric motors to effect throttle, brake and steering control of a motor vehicle adapted to include the controller. The controller enables the driver to control the adapted vehicle from anywhere in the vehicle with one hand with minimal control force and range of motion. In addition, even though a conventional vehicle is adapted for use with the remote controller, the vehicle may still be operated in the normal manner.

  8. Mobile Remote Control Architecture

    George Stefan Bogdan


    Full Text Available When mobile device become more and more popular the need to have a software bridge between them and the old fashioned computers became evident. Many different solutions have appeared to fill the void but few offer more than file sinking or remote SSH (secure shell connections. For computer professionals and other alike a tool that can do more regarding this connectivity and control gap became necessary. With this paper it is described an architecture and an implementation for creating such a system, underlining the difficulties, challenges and the many choices regarding overall system design, security and implementation that need to be made in order to provide the user with a secure, reliable and professional solution.

  9. Evaluation of the hemostatic and coagulation effects of AUTO CUT and DRY CUT using a computer-controlled cutting system.

    Szyrach, Mara N I; Tolba, Rene H; Voigtländer, Matthias; Neugebauer, Alexander; Enderle, Markus D


    To evaluate a newly developed computer-controlled cutting system for the generation of standardized resections and to systematically compare the hemostatic properties and tissue effect of 2 cutting modes, namely, AUTO CUT and DRY CUT used in urologic procedures. An isolated perfused kidney model was used to assess blood loss and coagulation depth after resection of tissue specimens of standardized geometry, size, and cutting velocity with a resection loop. Three different effect settings (E1, E3, and E6; 200 W) of the electrosurgical modes AUTO CUT and DRY CUT were compared. Blood loss was determined semiquantitatively by weighing a swab before and after placing it onto the resection area. The coagulation depth was estimated microscopically on cross sections. The computer-controlled cutting system creates resections of standardized geometry and size with a high reproducibility. An effect level-dependent increase in hemostasis and coagulation depth could be demonstrated with the cutting modes DRY CUT and AUTO CUT using this computer-controlled cutting system. The hemostatic effect with DRY CUT is significantly more pronounced than with AUTO CUT (E1, E3: P computer-controlled cutting system creating reproducible resections in combination with the isolated perfused kidney model offers the possibility to systematically investigate bleeding rate and coagulation depth. The stronger hemostatic properties of the DRY CUT mode are more favorable for urologic interventions requiring a higher hemostatic effect than the AUTO CUT mode. Copyright 2010 Elsevier Inc. All rights reserved.

  10. Adaptive Control Of Remote Manipulator

    Seraji, Homayoun


    Robotic control system causes remote manipulator to follow closely reference trajectory in Cartesian reference frame in work space, without resort to computationally intensive mathematical model of robot dynamics and without knowledge of robot and load parameters. System, derived from linear multivariable theory, uses relatively simple feedforward and feedback controllers with model-reference adaptive control.

  11. Remotely controllable liquid marbles

    Zhang, Lianbin


    Liquid droplets encapsulated by self-organized hydrophobic particles at the liquid/air interface - liquid marbles - are prepared by encapsulating water droplets with novel core/shell-structured responsive magnetic particles, consisting of a responsive block copolymer-grafted mesoporous silica shell and magnetite core (see figure; P2VP-b-PDMS: poly(2-vinylpyridine-b- dimethylsiloxane)). Desirable properties of the liquid marbles include that they rupture upon ultraviolet illumination and can be remotely manipulated by an external magnetic field. 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  12. Decoding the TV Remote Control.

    O'Connell, James


    Describes how to observe the pulse structure of the infrared signals from the light-emitting diode in a TV remote control. This exercise in decoding infrared digital signals provides an opportunity to discuss semiconductors, photonics technology, cryptology, and the physics of how things work. (WRM)


    Reecha Ranjan Singh , Sangeeta Agrawal , Saurabh Kapoor ,S. Sharma


    Full Text Available A modern world contains varieties of electronic equipment and systems like: TV, security system, Hi-fi equipment, central heating systems, fire alarm systems, security alarm systems, lighting systems, SET Top Box, AC (Air Conditioner etc., we need to handle, ON/OFF or monitor these electrical devices remotely or to communicate with these but, if you are not at the home or that place and you want to communicate with these device. So the new technology for handled these devices remotely and for communication to required the GSM, mobile technology, SMS (short message service and some hardware resources. SMS based remote control for home appliances is beneficial for the human generation, because mobile is most recently used technology nowadays.

  14. Remote Control of Home Appliances

    Mayola Reena Fernandes


    Full Text Available The paper entitled "Remote Control of Home Appliances" aims at providing access to home appliances from a far-off location over the Internet. The paper is designed and implemented to achieve control on the appliances such as light bulbs, fans, serial lights and a dot-matrix display over the internet. The paper is deployed by dividing it into three major modules namely Input, Computation and Output where the modules interact with each other to bring out the overall functionality the paper desires to. The significance of implementing the paper is, the remote control of home appliances over the internet. The other important advantages are: It eliminates re-programming the microcontroller of the dot-matrix display and also it eliminates the need for a person to be present to operate and control any of the home appliances, thus reducing the labor.



    The intelligent optimizing method of cutting parameters and the cutting stable districts searching method are set up. The cutting parameters of each cutting pass could be optimized automatically, the cutting chatter is predicted through setting up the dynamic cutting force AR(2) model on-line, the spindle rotation speed is adjusted according to the predicting results so as to ensure the cutting system work in stable district.

  16. Instrument Remote Control Application Framework

    Ames, Troy; Hostetter, Carl F.


    The Instrument Remote Control (IRC) architecture is a flexible, platform-independent application framework that is well suited for the control and monitoring of remote devices and sensors. IRC enables significant savings in development costs by utilizing extensible Markup Language (XML) descriptions to configure the framework for a specific application. The Instrument Markup Language (IML) is used to describe the commands used by an instrument, the data streams produced, the rules for formatting commands and parsing the data, and the method of communication. Often no custom code is needed to communicate with a new instrument or device. An IRC instance can advertise and publish a description about a device or subscribe to another device's description on a network. This simple capability of dynamically publishing and subscribing to interfaces enables a very flexible, self-adapting architecture for monitoring and control of complex instruments in diverse environments.

  17. Remote Operations Control Center (ROCC)


    Students at Rensselaer Polytechnic Institute (RPI) in Troy, NY, monitor the progress of the Isothermal Dendritic Growth Experiment (IDGE) during the U.S. Microgravity Payload-4 (USMP-4) mission (STS-87, Nov. 19 - Dec. 5, 1997). Remote Operation Control Center (ROCC) like this one will become more common during operations with International Space Station. IDGE, flown on three Space Shuttle missions, is yielding new insights into virtually all industrially relevant metal and alloy forming operations. Photo credit: Renssenlaer Polythnic Institute (RPI)

  18. Development of remote pipe cutting tool for divertor cassettes in JT-60SA

    Hayashi, Takao, E-mail:; Sakurai, Shinji; Shibanuma, Kiyoshi; Sakasai, Akira


    Remote pipe cutting tool accessing from inside pipe has been newly developed for JT-60SA. The tool head equips a disk-shaped cutter blade and four rollers which are subjected to the reaction force. The tool pushes out the cutter blade by decreasing the distance between two cams. The tool cuts a cooling pipe by both pushing out the cutter blade and rotating the tool head itself. The roller holder is not pushed out anymore after touching the inner wall of the pipe. In other words, only cutter blade is pushed out after bringing the tool axis into the pipe axis. Outer diameter of the cutting tool head is 44 mm. The cutting tool is able to push out the cutter blade up to 32.5 mm in radius, i.e. 65 mm in diameter, which is enough to cut the pipe having an outer diameter of 59.8 mm. The thickness and material of the cooling pipe are 2.8 mm and SUS316L, respectively. The length of the cutting tool head is about 1 m. The tool is able to cut a pipe locates about 480 mm in depth from the mounting surface on the divertor cassette. The pipe cutting system equips two cutting heads and they are able to cut two pipes at the same time in order to remove the inner target plate. Reproducibility of the cross-sectional shape of the cut pipe is required for re-welding. The degree of reproducibility is inside 0.1 mm except for burr at outside of the pipe, which is enough to re-weld the cut pipe. Some swarf is generated during cutting the double-layered pipe assuming a plug located on the top of the pipe. The swarf is deposited on the bottom of the plug and collected by pulling out the plug in the actual equipment.

  19. Design of Wireless Remote Control Solar Cleaner

    Ma Zhicai


    Full Text Available This paper describes the operation principle and the hardware composition of the wireless remote control cleaner by adopting solar panel power supply mode in detail. The experimental circuit is designed and on based on the designed experimental circuit the wireless remote control solar cleaner is made. The experimental results show that it is feasible that the combination of solar panels and wireless remote control cleaner.

  20. Remote control of planetary surface vehicles.

    Heer, E.


    A remotely manned system consisting of an earth-based control center and a remote rover system on the planetary surface is assumed to extend to the remote site the sensory, manipulative and certain intellectual capabilities of humans here on earth. Required system functions, including scientific payload functions, vehicle functions and ground-based human control functions are discussed and the effects of communication delay and increased remote automaticity on system performance are investigated. To accomplish the required operations for scientific exploration, the control of the remote system requires the development of techniques to deal with problems of long communication time delays so that the performance in terms of operation speed can be increased to acceptable levels. Increased operational performance can be achieved primarily by increasing the rate of useful information flow in the man-machine sensor-control loop, or by increasing the autonomous capabilities of the remote system or by both.

  1. Comparative Study of Remote Fiber Laser and Water-Jet Guided Laser Cutting of Thin Metal Sheets

    Hock, Klaus; Adelmann, Benedikt; Hellmann, Ralf

    This article presents a comparison between remote laser cutting with a fiber laser and water-jet guided laser cutting using a 532 nm solid state laser. Complex contours are processed in stainless steel and brass sheets (thickness ≤ 100 μm), respectively. Results for achievable quality and productivity as well as possible applications for both systems are shown and discussed. We sustained dross free cuts with almost no heat affected zone and small kerf width for the water-jet guided process, whereas small dross, notable heat affected zone and varying kerf width where observed for remote cutting. However, process times for the water-jet guided process where considerably higher than those for remote cutting.

  2. Remote Control of Experiments via Matlab

    Michal Sedlak


    Full Text Available The paper demonstrates two possibilities of remote control of real experiments using Matlab software environment. We introduced basic approaches to Matlab remote access using Matlab Web Server, COM and Virtual Reality Toolbox. The proposed concepts were used and tested for control of magnetic levitation system. The gained experience was also discussed in the paper.

  3. Two-object remote quantum control

    Yu, Yafei; Liu, Tangkun; Huang, Yanxia; Zhan, Mingsheng


    We consider the two-object remote quantum control for a special case in which all the object qubits are in a telecloning state. We propose a scheme which achieves the two-object remote quantum control by using two particular four-particle entangled states.

  4. Analysis of Control Power in Controlled Remote State Preparation Schemes

    Li, Xihan; Ghose, Shohini


    We quantify and analyze the controller's power in controlled remote state preparation schemes. Our analysis provides a lower bound on the control power required for controlled remote preparation of arbitrary D-dimensional states. We evaluate several existing controlled remote state preparation protocols and show that some proposed non-maximally entangled channels are not suitable for perfect controlled remote preparation of arbitrary quantum states from the controller's point of view. We find that for remotely preparing D-dimensional states, the entropy of each controller should be no less than log2 D bits. Our new criteria are not only useful for evaluating controlled remote state preparation schemes but can also be used for other controlled quantum communication schemes.

  5. Combining cutting and herbicide application for Ambrosia artemisiifolia control

    Sölter, Ulrike


    Full Text Available The effect on Ambrosia artemisiifolia (common ragweed of combining cutting and herbicide application was studied in pot experiments in Germany and Denmark in 2013. Single plants of common ragweed were established in 2 L pots in glasshouses. Two cutting treatments were conducted: cutting to 10 cm height at the beginning of male budding (BBCH 51-59 and no cutting. Clopyralid (in Germany: Lontrel 600, in Denmark: Matrigon, mesotrione (in Germany and Denmark: Callisto and glyphosate (in Germany: Clinic, in Denmark: Roundup Bio were applied at 4 doses at three different timings: on the day of cutting, one week and two weeks after cutting. The plants were harvested 5 weeks after the last herbicide application. At both sites clopyralid and mesotrione had a low efficacy on common ragweed when applied on developed plants with only minor differences in efficacy at the three timings. Application after cutting improved the efficacy of clopyralid at both sites and of mesotrione in Denmark. In Germany glyphosate had a higher efficacy on noncut plants in comparison to the cut plants, in Denmark it was vice versa. The highest dose of glyphosate provided higher control levels on developed plants than clopyralid and mesotrione at both sites. In Denmark the highest effects were obtained shortly after cutting with the maximum dose of each herbicide and declined with time between cutting and herbicide application. In summary the results demonstrated that herbicides can be applied shortly after cutting without loss of efficacy.

  6. Process time optimization of robotic remote laser cutting by utilizing customized beam patterns and redundancy space task sequencing

    Villumsen, Sigurd

    and an industrial robot and XY table for positioning the laser beam. The second area of focus covers the establishment of a benchmark with which the performance of the ROBOCUT technology could be evaluated. It was chosen to use remote fusion cutting as a benchmark for this evaluation. It was shown through several......This dissertation is written as a part of the ROBOCUT project which concerns the development of a new laser cutting technology that seeks to increase the performance of traditional and remote laser cutting by using beam shaping technologies. The resulting customized beam patterns are obtained...... by using a diffractive optical element (DOE). The main work of this dissertation falls within three areas of focus. The first area of focus covers the development of a flexible laser processing laboratory for DOE cutting. A laboratory was created with a single mode fiber laser used for DOE cutting...

  7. Cutting

    ... a traumatic experience, such as living through abuse , violence, or a disaster. Self-injury may feel like ... embarrassed." Sometimes self-injury affects a person's body image. Jen says, "I actually liked how the cuts ...

  8. Virtual control room, the REMOT project, networking pilot studies

    Andree, H. M. A.; Habets, J.; Koopmans, M.; Kooijman, W.; Kemmerling, G.; Korten, M.; de Laat, C. T. A. M.; Lourens, W.; van der Meer, E. A.; Oomens, A. A. M.; Venema, J.


    The Remote Experiment Monitoring and Control (REMOT) project objective is to develop a system architecture to allow remote control of scientific experiments and facilities that require real time operation and multimedia information feedback, using available or deploying communications infrastructure

  9. 47 CFR 74.634 - Remote control operation.


    ... 47 Telecommunication 4 2010-10-01 2010-10-01 false Remote control operation. 74.634 Section 74.634... Stations § 74.634 Remote control operation. (a) A TV auxiliary station may be operated by remote control... controlled by persons authorized by the licensee. (2) The remote control equipment must be maintained to...

  10. 47 CFR 74.434 - Remote control operation.


    ... 47 Telecommunication 4 2010-10-01 2010-10-01 false Remote control operation. 74.434 Section 74.434....434 Remote control operation. (a) A remote control system must provide adequate monitoring and control functions to permit proper operation of the station. (b) A remote control system must be designed, installed...

  11. Remote Control of Android Phones Using VNC

    Sejal Patel,


    Full Text Available Virtual Network Computing (VNC is a graphical desktop sharing system to remotely control another computer. It makes use of Remote Frame Buffer protocol which is a simple protocol for remote access to Graphical User Interface. VNC allows users to access graphical displays quickly and easily. This paper proposes a new architecture for remote control of android mobile devices which allows sharing of displays between android mobile phone and PCs. This process must be carried out within Wi-Fi range irrespective of various platforms like Windows, Mac or Linux. The image of the desktop should be compressed before transmission. A modified region algorithm is used to reduce the encoding time of screen image and increase the screen update rate. A number of video encoders are integrated into a prototype system.

  12. Distribution of control decisions in remote manipulation

    Bejczy, A. K.


    The particular characteristics of the problem of distributing control decisions between man and computer in remotely controlled manipulation are discussed. State of the art is reviewed from two viewpoints: (1) specifications of both control commands and control context of sensor signals the operator inputs to the manipulator control computer; (2) operations the manipulator control computer performs on operator commands and realtime sensor signals to control the manipulator for a specified task. JPL breadboard systems, system components, and control experiments are described related to the development and evaluation of manipulator control systems with capabilities of distributing control decisions between man and computer.

  13. Remote Experiments in Control Engineering Education Laboratory

    Milica B Naumović


    Full Text Available This paper presents Automatic Control Engineering Laboratory (ACEL - WebLab, an under-developed, internet-based remote laboratory for control engineering education at the Faculty of Electronic Engineering in Niš. Up to now, the remote laboratory integrates two physical systems (velocity servo system and magnetic levitation system and enables some levels of measurement and control. To perform experiments in ACEL-WebLab, the "LabVIEW Run Time Engine"and a standard web browser are needed.

  14. Remote control of moving sessile droplets

    Noblin, Xavier; Celestini, Franck


    We recently put in evidence (\\cite{noblin2}) that combined vertical and horizontal vibrations can induced a controlled motion of a sessile supported drop. In this video we generalize this finding and demonstrate that a remote 2d controlled motion is possible. This video was submitted as part of the Gallery of Fluid Motion 2010 which is showcase of fluid dynamics videos.

  15. Deterministic Tripartite Controlled Remote State Preparation

    Sang, Ming-huang; Nie, Yi-you


    We demonstrate that a seven-qubit entangled state can be used to realize the deterministic tripartite controlled remote state preparation by performing only Pauli operations and single-qubit measurements. In our scheme, three distant senders can simultaneously and deterministically exchange their quantum state with the other senders under the control of the supervisor.

  16. Remote control of an impact demonstration vehicle

    Harney, P. F.; Craft, J. B., Jr.; Johnson, R. G.


    Uplink and downlink telemetry systems were installed in a Boeing 720 aircraft that was remotely flown from Rogers Dry Lake at Edwards Air Force Base and impacted into a designated crash site on the lake bed. The controlled impact demonstration (CID) program was a joint venture by the National Aeronautics and Space Administration (NASA) and the Federal Aviation Administration (FAA) to test passenger survivability using antimisting kerosene (AMK) to inhibit postcrash fires, improve passenger seats and restraints, and improve fire-retardent materials. The uplink telemetry system was used to remotely control the aircraft and activate onboard systems from takeoff until after impact. Aircraft systems for remote control, aircraft structural response, passenger seat and restraint systems, and anthropomorphic dummy responses were recorded and displayed by the downlink stems. The instrumentation uplink and downlink systems are described.

  17. Quantum remote control Teleportation of unitary operations

    Huelga, S F; Chefles, A; Plenio, M B


    We consider the implementation of an unknown arbitrary unitary operation U upon a distant quantum system. This teleportation of U can be viewed as a quantum remote control. We investigate the protocols which achieve this using local operations, classical communication and shared entanglement (LOCCSE). Lower bounds on the necessary entanglement and classical communication are determined using causality and the linearity of quantum mechanics. We examine in particular detail the resources required if the remote control is to be implemented as a classical black box. Under these circumstances, we prove that the required resources are, necessarily, those needed for implementation by bidirectional state teleportation.

  18. Remote controlled mover for disposal canister transfer

    Suikki, M. [Optimik Oy, Turku (Finland)


    This working report is an update for an earlier automatic guided vehicle design (Pietikaeinen 2003). The short horizontal transfers of disposal canisters manufactured in the encapsulation process are conducted with remote controlled movers both in the encapsulation plant and in the underground areas at the canister loading station of the disposal facility. The canister mover is a remote controlled transfer vehicle mobile on wheels. The handling of canisters is conducted with the assistance of transport platforms (pallets). The very small automatic guided vehicle of the earlier design was replaced with a commercial type mover. The most important reasons for this being the increased loadbearing requirement and the simpler, proven technology of the vehicle. The larger size of the vehicle induced changes to the plant layouts and in the principles for dealing with fault conditions. The selected mover is a vehicle, which is normally operated from alongside. In this application, the vehicle steering technology must be remote controlled. In addition, the area utilization must be as efficient as possible. This is why the vehicle was downsized in its outer dimensions and supplemented with certain auxiliary equipment and structures. This enables both remote controlled operation and improves the vehicle in terms of its failure tolerance. Operation of the vehicle was subjected to a risk analysis (PFMEA) and to a separate additional calculation conserning possible canister toppling risks. The total cost estimate, without value added tax for manufacturing the system amounts to 730 000 euros. (orig.)

  19. Delineating Grazing: Observations of Remote Control Use.

    Eastman, Susan Tyler; Newton, Gregory D.


    States that contrary to previous reports of "grazing," most viewers only used their remote control devices (RCDs) once or twice every half hour. Claims that the dominant RCD operation was direct channel punching, as opposed to dial turning. Concludes that most RCD activity did not take place during a program, thus voiding industry…

  20. Computer control for remote wind turbine operation

    Manwell, J.F.; Rogers, A.L.; Abdulwahid, U.; Driscoll, J. [Univ. of Massachusetts, Amherst, MA (United States)


    Light weight wind turbines located in harsh, remote sites require particularly capable controllers. Based on extensive operation of the original ESI-807 moved to such a location, a much more sophisticated controller than the original one has been developed. This paper describes the design, development and testing of that new controller. The complete control and monitoring system consists of sensor and control inputs, the control computer, control outputs, and additional equipment. The control code was written in Microsoft Visual Basic on a PC type computer. The control code monitors potential faults and allows the turbine to operate in one of eight states: off, start, run, freewheel, low wind shut down, normal wind shutdown, emergency shutdown, and blade parking. The controller also incorporates two {open_quotes}virtual wind turbines,{close_quotes} including a dynamic model of the machine, for code testing. The controller can handle numerous situations for which the original controller was unequipped.

  1. Remote radio control of insect flight.

    Sato, Hirotaka; Berry, Christopher W; Peeri, Yoav; Baghoomian, Emen; Casey, Brendan E; Lavella, Gabriel; Vandenbrooks, John M; Harrison, Jon F; Maharbiz, Michel M


    We demonstrated the remote control of insects in free flight via an implantable radio-equipped miniature neural stimulating system. The pronotum mounted system consisted of neural stimulators, muscular stimulators, a radio transceiver-equipped microcontroller and a microbattery. Flight initiation, cessation and elevation control were accomplished through neural stimulus of the brain which elicited, suppressed or modulated wing oscillation. Turns were triggered through the direct muscular stimulus of either of the basalar muscles. We characterized the response times, success rates, and free-flight trajectories elicited by our neural control systems in remotely controlled beetles. We believe this type of technology will open the door to in-flight perturbation and recording of insect flight responses.

  2. Remote radio control of insect flight

    Hirotaka Sato


    Full Text Available We demonstrated the remote control of insects in free flight via an implantable radio-equipped miniature neural stimulating system. The pronotum mounted system consisted of neural stimulators, muscular stimulators, a radio transceiver-equipped microcontroller and a microbattery. Flight initiation, cessation and elevation control were accomplished through neural stimulus of the brain which elicited, suppressed or modulated wing oscillation. Turns were triggered through the direct muscular stimulus of either of the basalar muscles. We characterized the response times, success rates, and free-flight trajectories elicited by our neural control systems in remotely-controlled beetles. We believe this type of technology will open the door to in-flight perturbation and recording of insect flight responses.

  3. Network Security in Remote Supervisory Control



    After an introduction to the implementation of supervisory computer control (SCC) through networks and the relevant security issues, this paper centers on the core of network security design: intelligent front-end processor (FEP), encryption/decryption method and authentication protocol. Some other system-specific security measures are also proposed. Although these are examples only, the techniques discussed can also be used in and provide reference for other remote control systems.

  4. New solids control system reduced oil on cuttings

    Wilkinson, T.P. [Oiltools Europe Ltd., Aberdeen (United Kingdom)


    A new solids control system, consisting of four new shakers and a dryer in parallel all discharging into another dryer, significantly reduced the oil on the cuttings in a nine-well offshore drilling program. Cleaned, slurrified cuttings were then discharged overboard. In November 1994, Oiltools (Europe) Ltd. received contracts to upgrade the solids control systems on Sedco Forex`s Sedco 711 and Sovereign Explorer semisubmersible drilling vessels. Sedco Forex required systems that would meet the reduced oil-on-cuttings (OOC) disposal limit of less than 80 g/kg set by the operator, while staying efficient and economical to operate and maintain. In addition, all solids were required to be slurrified for pumping overboard to ensure dispersal away from the subsea center. This article highlights the equipment used and the savings realized on the Sovereign Explorer after the first three wells of a nine-well program.

  5. The Remote Computer Control (RCC) system

    Holmes, W.


    A system to remotely control job flow on a host computer from any touchtone telephone is briefly described. Using this system a computer programmer can submit jobs to a host computer from any touchtone telephone. In addition the system can be instructed by the user to call back when a job is finished. Because of this system every touchtone telephone becomes a conversant computer peripheral. This system known as the Remote Computer Control (RCC) system utilizes touchtone input, touchtone output, voice input, and voice output. The RCC system is microprocessor based and is currently using the INTEL 80/30microcomputer. Using the RCC system a user can submit, cancel, and check the status of jobs on a host computer. The RCC system peripherals consist of a CRT for operator control, a printer for logging all activity, mass storage for the storage of user parameters, and a PROM card for program storage.

  6. Remote control as an aid to safety in underground mining

    Noel, M.; Carbonel, P.


    Discusses the general concepts of safety and reliability on coal shearers, both with manual and remote control steering, including how the remote-control equipment is protected from electromagnetic disturbance, etc. Describes equipment developed by Cerchar: Telsafe carrier-cable remote control, Telsafe TV remote control, Telsafe CA data transmission system. Concludes by emphasising the need for equipment reliability in order to achieve marketing success.

  7. Remote Control Research in Central Africa

    Trefon, Theodore; Cogels, Serge


    This article explains how a project being implemented in peri-urban central Africa is coordinated from an office in Brussels. After an overview that addresses the conceptual challenges of defining ‘peri-urban’ and the question of why these social spaces are important from a development perspective, the article outlines ‘remote control research’ step-by-step: (i) conceptualisation, (ii) identification and recruitment of local experts, (iii) selection of research sites, (iv) the process of form...

  8. Virtual Machine Language Controls Remote Devices


    Kennedy Space Center worked with Blue Sun Enterprises, based in Boulder, Colorado, to enhance the company's virtual machine language (VML) to control the instruments on the Regolith and Environment Science and Oxygen and Lunar Volatiles Extraction mission. Now the NASA-improved VML is available for crewed and uncrewed spacecraft, and has potential applications on remote systems such as weather balloons, unmanned aerial vehicles, and submarines.

  9. 46 CFR 111.54-3 - Remote control.


    ... 46 Shipping 4 2010-10-01 2010-10-01 false Remote control. 111.54-3 Section 111.54-3 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) ELECTRICAL ENGINEERING ELECTRIC SYSTEMS-GENERAL REQUIREMENTS Circuit Breakers § 111.54-3 Remote control. Remotely controlled circuit breakers must have...

  10. 47 CFR 27.1210 - Remote control operation.


    ... 47 Telecommunication 2 2010-10-01 2010-10-01 false Remote control operation. 27.1210 Section 27.1210 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) COMMON CARRIER SERVICES....1210 Remote control operation. Licensed BRS/EBS stations may be operated by remote control without...

  11. 21 CFR 892.5700 - Remote controlled radionuclide applicator system.


    ... electromechanical or pneumatic device intended to enable an operator to apply, by remote control, a radionuclide... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Remote controlled radionuclide applicator system... SERVICES (CONTINUED) MEDICAL DEVICES RADIOLOGY DEVICES Therapeutic Devices § 892.5700 Remote controlled...

  12. 47 CFR 78.51 - Remote control operation.


    ... 47 Telecommunication 4 2010-10-01 2010-10-01 false Remote control operation. 78.51 Section 78.51... SERVICE General Operating Requirements § 78.51 Remote control operation. (a) A CARS station may be operated by remote control: Provided, That such operation is conducted in accordance with the conditions...

  13. 47 CFR 74.533 - Remote control and unattended operation.


    ... 47 Telecommunication 4 2010-10-01 2010-10-01 false Remote control and unattended operation. 74.533... Auxiliary Stations § 74.533 Remote control and unattended operation. (a) Aural broadcast STL and intercity relay stations may be operated by remote control provided that such operation is conducted in accordance...

  14. Modified impedance control for robotic saw cutting: Simulation and implementation in three degrees of freedom

    Kriikku, E.M. [Westinghouse Savannah River Co., Aiken, SC (United States); Reynolds, D.L.; Carroll, J.J.; Dawson, D.M. [Clemson Univ., SC (United States). School of Electrical and Computer Engineering


    The Savannah River Site (SRS) production and decommissioning operations produce solid radioactive transuranic (TRU) waste. This waste must be repackaged and sent to the Waste Isolation Pilot Plant (WIPP) for permanent disposal. The Savannah River Technology Center (SRTC) built a test facility to demonstrate simulated waste processing. The test facility use`s a CIMCORP multi-axis robot system, a CIMROC{trademark} II robot controller, and an electric circular saw to remotely open and size reduce plywood crates. The robot can either be teleoperated using joysticks or autonomously controlled via the, CIMROC{trademark} II. Both methods are inadequate for circular saw cutting of plywood crates due to frequent saw blade binding. Blade binding results from the current commercial robot controller limitations. The limitations are overcome by incorporating additional sensor information into the existing controller structure. In this paper we utilize a force sensor and a frequency counter to implement a modified impedance controller which prevents saw blade binding.

  15. Modified impedance control for robotic saw cutting: Simulation and implementation in three degrees of freedom

    Kriikku, E.M. (Westinghouse Savannah River Co., Aiken, SC (United States)); Reynolds, D.L.; Carroll, J.J.; Dawson, D.M. (Clemson Univ., SC (United States). School of Electrical and Computer Engineering)


    The Savannah River Site (SRS) production and decommissioning operations produce solid radioactive transuranic (TRU) waste. This waste must be repackaged and sent to the Waste Isolation Pilot Plant (WIPP) for permanent disposal. The Savannah River Technology Center (SRTC) built a test facility to demonstrate simulated waste processing. The test facility use's a CIMCORP multi-axis robot system, a CIMROC[trademark] II robot controller, and an electric circular saw to remotely open and size reduce plywood crates. The robot can either be teleoperated using joysticks or autonomously controlled via the, CIMROC[trademark] II. Both methods are inadequate for circular saw cutting of plywood crates due to frequent saw blade binding. Blade binding results from the current commercial robot controller limitations. The limitations are overcome by incorporating additional sensor information into the existing controller structure. In this paper we utilize a force sensor and a frequency counter to implement a modified impedance controller which prevents saw blade binding.

  16. Remote Control Software: Online from Micro to Micro.

    Kittle, Paul


    Provides an introduction to the use of communications software for remote access between microcomputers. Areas discussed include hardware requirements for these applications, software features that should be considered, security issues, and some disadvantages of remote control software. A directory of remote control software packages is provided.…

  17. Remotely operated gripper provides vertical control rod movement

    Hutter, E.; Koch, L. J.


    Remote actuation of a gripper shaft affects vertical engagement between a drive shaft and control rod. A secondary function of the gripper is to provide remote indication of positive completion of the gripping or ungripping operation.

  18. Remote Control Guidance Law Design Using Variable Structure Control


    A method of sliding mode variable structure control for the missile body being a time varying system is presented. A remote control guidance law is designed. The method has strong robustness to target's maneuver. To reduce the chattering phenomena, quasi-sliding mode variable structure control method is used. Simulation results show that the proposed method has small miss distance for any kind of maneuvering targets and requires small control energy.

  19. Controls from remote through Social networks

    Alessandra Ingrao


    Full Text Available The Author focuses on the recently reformed provisions regulating the employer’s power to control from remote the employees’ activities (art. 4 of the Workers Statute, with particular regard to controls performed by means of Social networks.Such controls are in fact extremely powerful due to the versatile and multi-purpose character of Social networks, which may also be used as a working device. A widespread case law shows indeed that employer’s controls may cost a worker his job.Therefore, after the reform, all employees will have to read carefully the employer’s Privacy policies, before accessing socials during the worktime to express opinions and/or frustrations.

  20. Adaptive supervisory control of remote manipulation

    Ferrell, W. R.


    The command language by which an operator exerts supervisory control over a general purpose remote manipulator should be designed to accommodate certain characteristics of human performance if there is to be effective communication between the operator and the machine. Some of the ways in which people formulate tasks, use language, learn and make errors are discussed and design implications are drawn. A general approach to command language design is suggested, based on the notion matching the operator's current task schema or context by appropriate program structures or 'frames' in the machine.

  1. Software Development for Remote Control and Firing Room Displays

    Zambrano Pena, Jessica


    The Launch Control System (LCS) developed at NASA's Kennedy Space Center (KSC) will be used to launch future spacecraft. Two of the many components of this system are the Application Control Language (ACL) and remote displays. ACL is a high level domain specific language that is used to write remote control applications for LCS. Remote displays are graphical user interfaces (GUIs) developed to display vehicle and Ground Support Equipment (GSE) data, they also provide the ability to send commands to control GSE and the vehicle. The remote displays and the control applications have many facets and this internship experience dealt with several of them.

  2. Unidirectional Quantum Remote Control:Teleportation of Control-State

    ZHENG Yi-Zhuang; GU Yong-Jian; WU Gui-Chu; GUO Guang-Can


    We investigate the problem of teleportation of unitary operations by unidirectional control-state telepor-tation and propose a scheme called unidirectional quantum remote control. The scheme is based on the isomorphismbetween operation and state. It allows us to store a unitary operation in a control state, thereby teleportation of theunitary operation can be implemented by unidirectional teleportation of the control-state. We find that the probabilityof success for implementing an arbitrary unitary operation on arbitrary M-qubit state by unidirectional control-stateteleportation is 4-M, and 2M ebits and 4M cbits are consumed in each teleportation.

  3. Smart Remote for the Setup Box Using Gesture Control

    Surepally Uday Kumar


    Full Text Available The basic purpose of this project is to provide a means to control a set top box (capable of infrared communication, in this case Hathway using hand gestures. Thus, this system will act like a remote control for operating set top box, but this will be achieved through hand gestures instead of pushing buttons. To send and receive remote control signals, this project uses an infrared LED as Transmitter. Using an infrared receiver, an Arduino can detect the bits being sent by a remote control. And to playback a remote control signal, the Arduino can flash an infrared LED at 38 kHz. With this project we can design a gesture controlled remote by using a glove, it can be fixed to the hand, we can send any signal of any length, at any related frequency, and thus we can design a universal remote.

  4. Team Viewer Technology for Remote Control of a Computer

    Cornelia Victoria Anghel Drugarin


    Full Text Available Team Viewer software is used to remote control our PC. We can use this remote control technology to desktop sharing, online conferences and for file transfer between computers. Basically, using this software, you can ask for help a friend, or professional software to solve problems from a distance, without it having to be physically go to each client / friend in part. After installed and configured Team Viewer application, is complete, we can remote control the computer.

  5. The application of NASREM to remote robot control

    Walker, Michael W.; Dionise, Joe; Dobryden, AL


    The implementation of a remote robot controller, wherein the distance to the remote robot causes significant communication time delays is described. The NASREM telrobot control architecture is used as a basis for the implementation of the system. Levels 1 through 4 of the hierarchy were implemented. The solution to the problems encounterd during the implementation and those which are unique to remote robot control are described.

  6. Display aids for remote control of untethered undersea vehicles

    Verplank, W. L.


    A predictor display superimposed on slow-scan video or sonar data is proposed as a method to allow better remote manual control of an untethered submersible. Simulation experiments show good control under circumstances which otherwise make control practically impossible.

  7. From remote-controlled to self-controlled citizens

    Helbing, D.


    The digital revolution will make data abundant and cheap. Moving from a time of darkness into a digital age with information overload, we will need suitable filters. However, those who build these filters will determine what we see. This creates possibilities to influence people's decisions such that they become remotely controlled rather than make their decisions on their own. Since omnibenevolent rule cannot be supposed and top-down control is flawed for several reasons, another approach is needed. It can be found with distributed control, collective intelligence and participation. "Nervousnet" will be presented as a feasible specimen of a Citizen Web.

  8. Combining cutting and herbicide application for Ambrosia artemisiifolia control

    Sölter, Ulrike; Matthiassen, Solvejg K.


    The effect on Ambrosia artemisiifolia (common ragweed) of combining cutting and herbicide application was studied in pot experiments in Germany and Denmark in 2013. Single plants of common ragweed were established in 2 L pots in glasshouses. Two cutting treatments were conducted: cutting to 10 cm height at the beginning of male budding (BBCH 51-59) and no cutting. Clopyralid (in Germany: Lontrel 600, in Denmark: Matrigon), mesotrione (in Germany and Denmark: Callisto) and glyphosate (in Germa...



    An adaptive learning control scheme intended to the on-line optimization of sculptured surface cutting process is presented. The scheme uses a back-propagation neural network to learn the relationships between process inputs and process states. The cutting parameters of the process model are optimized through a genetic algorithms(GA). The capacity of the proposed scheme for determining optimum process inputs under a variety of process conditions and optimization strategies is evaluated on the basis of milling of a sculptured surface using a ball-end mill. The experimental results show that the neural network could model the cutting process efficiently, and the cutting conditions such as spindle speed could be regulated for achieving high efficiency and high quality. Therefore the proposed approach can be well applied to the manufacturing of dies and molds.

  10. Current limiting remote power control module

    Hopkins, Douglas C.


    The power source for the Space Station Freedom will be fully utilized nearly all of the time. As such, any loads on the system will need to operate within expected limits. Should any load draw an inordinate amount of power, the bus voltage for the system may sag and disrupt the operation of other loads. To protect the bus and loads some type of power interface between the bus and each load must be provided. This interface is most crucial when load faults occur. A possible system configuration is presented. The proposed interface is the Current Limiting Remote Power Controller (CL-RPC). Such an interface should provide the following power functions: limit overloading and resulting undervoltage; prevent catastrophic failure and still provide for redundancy management within the load; minimize cable heating; and provide accurate current measurement. A functional block diagram of the power processing stage of a CL-RPC is included. There are four functions that drive the circuit design: rate control of current; current sensing; the variable conductance switch (VCS) technology; and the algorithm used for current limiting. Each function is discussed separately.

  11. Implementation of a Remote Control System for Smart Home

    YUAN Xiao-Chen; CHEANG Chak-Fong; LI Jian-Qing


    Advances in mobile communication bring great effects on people's life styles. This paper describes the implementation of a remote control scheme, Remote Control System via Bluetooth and SMS (Shod Message Service), which controls smart home in short distance and long distance, respectively. Although SMS is widely used for a variety of applications, it is not suitable for the purpose of remote control because it suffers from transmission delay, loss and lacks of confidentiality. This paper proposes a SMS-based protocol, which is designed with the mechanisms of reliable transmission and information encryption, thus it is capable of the implementation of secure and reliable control.

  12. Remote Robot Control With High Force-Feedback Gain

    Kim, Won S.


    Improved scheme for force-reflecting hand control of remote robotic manipulator provides unprecedently high force-reflection gain, even when dissimilar master and slave arms used. Three feedback loops contained in remote robot control system exerting position-error-based force feedback and compliance control. Outputs of force and torque sensors on robot not used directly for force reflection, but for compliance control, while errors in position used to generate reflected forces.

  13. Remote Operations and Ground Control Centers

    Bryant, Barry S.; Lankford, Kimberly; Pitts, R. Lee


    The Payload Operations Integration Center (POIC) at the Marshall Space Flight Center supports the International Space Station (ISS) through remote interfaces around the world. The POIC was originally designed as a gateway to space for remote facilities; ranging from an individual user to a full-scale multiuser environment. This achievement was accomplished while meeting program requirements and accommodating the injection of modern technology on an ongoing basis to ensure cost effective operations. This paper will discuss the open POIC architecture developed to support similar and dissimilar remote operations centers. It will include technologies, protocols, and compromises which on a day to day basis support ongoing operations. Additional areas covered include centralized management of shared resources and methods utilized to provide highly available and restricted resources to remote users. Finally, the effort of coordinating the actions of participants will be discussed.

  14. Supervisory control of remote manipulation: A preliminary evaluation

    Starr, G. P.


    A system for supervisory control is described, and preliminary results are presented. Supervisory control, where control is traded between man and computer, offers benefits in the control of a remote manipulator. The system has the potential to accomplish sophisticated tasks. It is indicated that supervisory control yields lower task completion times and is preferred over manual control.

  15. Virtual and remote control tower research, design, development and validation


    The interdisciplinary research and development work carried out in the last ten years which is presented in this book aimed at replacing the conventional airport control tower by a new “remote tower operation” work environment (RTO) which should enhance work efficiency and safety and reduce costs. This revolutionary human–system interface allows for remote aerodrome traffic control without a physical tower building and enables the establishment of remote airport traffic control centers (RTC) of which each may serve several airports from a central location.

  16. Research on Remote Network Bidirectional Detect and Control Model

    Hongyao Ju


    Full Text Available Remote network bidirectional detect and control technologies are the key factors to solve local network allopatry expansibility and management. With studying gateway integration technology, bidirectional VPN technology, identity authentication technology and dynamic host management technology can be integrated into gateway. Thus, bidirectional connect and control among allopatry local networks based on Internet can be solved. Whole area expansibility of local network is realized. With experiment, the model is proved to finish remote bidirectional interconnection of local network automatically and to obtain allopatry local users authority. The equipment detecting and controlling in remote local networks are realized.  

  17. Optimizing Optics For Remotely Controlled Underwater Vehicles

    Billet, A. B.


    The past decade has shown a dramatic increase in the use of unmanned tethered vehicles in worldwide marine fields. These vehicles are used for inspection, debris removal and object retrieval. With advanced robotic technology, remotely operated vehicles (ROVs) are now able to perform a variety of jobs previously accomplished only by divers. The ROVs can be used at greater depths and for riskier jobs, and safety to the diver is increased, freeing him for safer, more cost-effective tasks requiring human capabilities. Secondly, the ROV operation becomes more cost effective to use as work depth increases. At 1000 feet a diver's 10 minutes of work can cost over $100,000 including support personnel, while an ROV operational cost might be 1/20 of the diver cost per day, based on the condition that the cost for ROV operation does not change with depth, as it does for divers. In the ROV operation the television lens must be as good as the human eye, with better light gathering capability than the human eye. The RCV-150 system is an example of these advanced technology vehicles. With the requirements of manueuverability and unusual inspection, a responsive, high performance, compact vehicle was developed. The RCV-150 viewing subsystem consists of a television camera, lights, and topside monitors. The vehicle uses a low light level Newvicon television camera. The camera is equipped with a power-down iris that closes for burn protection when the power is off. The camera can pan f 50 degrees and tilt f 85 degrees on command from the surface. Four independently controlled 250 watt quartz halogen flood lamps illuminate the viewing area as required; in addition, two 250 watt spotlights are fitted. A controlled nine inch CRT monitor provides real time camera pictures for the operator. The RCV-150 vehicle component system consists of the vehicle structure, the vehicle electronics, and hydraulic system which powers the thruster assemblies and the manipulator. For this vehicle, a light


    Miloš Madić


    Full Text Available Laser cutting is one of the leading non-conventional machining technologies with a wide spectrum of application in modern industry. It order to exploit a number of advantages that this technology offers for contour cutting of materials, it is necessary to carefully select laser cutting conditions for each given workpiece material, thickness and desired cut qualities. In other words, there is a need for process control of laser cutting. After a comprehensive analysis of the main laser cutting parameters and process performance characteristics, the application of the developed software tool “BRUTOMIZER” for off-line control of CO2 laser cutting process of three different workpiece materials (mild steel, stainless steel and aluminum is illustrated. Advantages and abilities of the developed software tool are also illustrated.

  19. Vibration control of ultrasonic cutting via dynamic absorber

    Amer, Y.A. [Department of Mathematics, Faculty of Science, Zagazig University, Zagazig (Egypt)]. E-mail:


    Ultrasonic machining (USM) is one of the most effective non-conventional techniques. Its application especially to hard-to-machine material (HTM) is growing rapidly. The main operation condition of USM is at resonance where an exciter derives a tuned blade or a tool. In this paper, the coupling of two non-linear oscillators of the main system and absorber representing ultrasonic cutting process are investigated. This leads to a two-degree-of-freedom Duffing's oscillator in which such non-linear effects can be neutralized under certain dynamic conditions. The aim of this work is the control of the system behavior at principal parametric resonance condition where the system damage is probable. An approximate solution is derived up to the second order for the coupled system. A threshold value of linear damping has been obtained, where the system vibration can be reduced dramatically. The stability of the system is investigated applying both phase-plane and frequency response techniques. The effects of the different parameters of the absorber on system behavior are studied numerically. Comparison with the available published work is reported.

  20. Adaptive fuzzy integral sliding mode velocity control for the cutting system of a trench cutter

    Qi-yan TIAN; Jian-hua WEI; Jin-hui FANG‡; Kai GUO


    This paper presents a velocity controller for the cutting system of a trench cutter (TC). The cutting velocity of a cutting system is affected by the unknown load characteristics of rock and soil. In addition, geological conditions vary with time. Due to the complex load characteristics of rock and soil, the cutting load torque of a cutter is related to the geological conditions and the feeding velocity of the cutter. Moreover, a cutter’s dynamic model is subjected to uncertainties with unknown effects on its function. In this study, to deal with the particular characteristics of a cutting system, a novel adaptive fuzzy integral sliding mode control (AFISMC) is designed for controlling cutting velocity. The model combines the robust characteristics of an integral sliding mode controller with the adaptive adjusting characteristics of an adaptive fuzzy controller. The AFISMC cutting velocity con-troller is synthesized using the backstepping technique. The stability of the whole system including the fuzzy inference system, integral sliding mode controller, and the cutting system is proven using the Lyapunov theory. Experiments have been conducted on a TC test bench with the AFISMC under different operating conditions. The experimental results demonstrate that the proposed AFISMC cutting velocity controller gives a superior and robust velocity tracking performance.

  1. Virtual and Remote Laboratories in Process of Control Education

    Martin Kalúz


    Full Text Available This paper describes the progress in the development of virtual and remote laboratories at Department of Information Engineering and Process Control, FCFT STU in Bratislava. Article is the overview of technical solutions used for online education purposes. These comprise software technologies, most commonly used in virtual and remote laboratory design at our department, as MATLAB Web Server, Java, C/C++, and Adobe Flash. We have created virtual laboratories as online Web applications, which provide features of mathematical computing and simulations of technological plants. We also describe a technology of remote control laboratory with a real experimental device.

  2. Selective suture cutting for control of astigmatism following cataract surgery

    Bansal R


    Full Text Available Use of 10-0 monofilament nylon in ECCE cataract surgery leads to high with the rule astigmatism. Many intraoperative and post operative methods have been used to minimise post operative astigmatism. We did selective suture cutting in 38 consecutive patients. Mean keratometric astigmatism at three and six weeks post operative was 5.76 and 5.42 dioptres (D respectively. 77.5% of eyes had astigmatism above 2 D. Selective suture cutting along the axis of the plus high cylinder was done after six weeks of surgery. Mean post suture cutting keratometric astigmatism was 3.3 D and 70% of the eyes had astigmatism below 2 D. After 3 months of surgery mean keratometric astigmatism was reduced to 1.84 D. Axis of the astigmatism also changed following suture cutting. 40% of the eyes showed improvement in their Snellen acuity following reduction in the cylindrical power.

  3. Testing Efficiency Improved by Addition of Remote Access Control Room


    The NASA Lewis Research Center's Remote Access Control Room (RACR) uses off-the-shelf video conferencing software integrated with existing facility data systems to provide access to the test data by networking from virtually anywhere in the country. The system allows research engineers in remote locations to participate in tests and monitor data in real time just as if they were present in the control room.

  4. Function complex for automated system of coke machinery remote control

    Simonov, N.F.; Pankrat' ev, O.N.; Bannikov, L.S.; Slatin, E.I.; Parfenov, G.I.


    this paper discusses a functional control system for remote control of coking plants introduced at the KBAiM of the Giprokoks. The control block allows for three modes of operation: fully automatic, by predesignated program according to oven design and technology; semi-automatic, in which individual programs perform automatically, checked and initiated by the operator; and remote, in which the operator controls each operation from the control console. The functions of selecting the location for the coke machinery, signal transmission and control selection have been incorporated as three autonomous but interfacing systems. (In Russian)

  5. Slicing Cuts on Food Materials Using Robotic-Controlled Razor Blade

    Debao Zhou


    Full Text Available Cutting operations using blades can arise in a number of industries, for example, food processing industry, in which cheese, fruit and vegetable, even meat, are involved. Certain questions will rise during these works, such as “why pressing-and-slicing cuts use less force than pressing-only cuts” and “how is the influence of the blade cutting-edge on force”. To answer these questions, this research developed a mathematical expression of the cutting stress tensor. Based on the analysis of the stress tensor on the contact surface, the influence of the blade edge-shape and slicing angle on the resultant cutting force were formulated and discussed. These formulations were further verified using experimental results by robotic cutting of potatoes. Through studying the change of the cutting force, the optimal slicing angle can be obtained in terms of maximum feeding distance and minimum cutting force. Based on the blade sharpness properties and the specific materials, the required cutting force can be predicted. These formulation and experimental results explained the basic theory of blade cutting fracture and further provided the support to optimize the cutting mechanism design and to develop the force control algorithms for the automation of blade cutting operations.

  6. Remote presence proctoring by using a wireless remote-control videoconferencing system.

    Smith, C Daniel; Skandalakis, John E


    Remote presence in an operating room to allow an experienced surgeon to proctor a surgeon has been promised through robotics and telesurgery solutions. Although several such systems have been developed and commercialized, little progress has been made using telesurgery for anything more than live demonstrations of surgery. This pilot project explored the use of a new videoconferencing capability to determine if it offers advantages over existing systems. The video conferencing system used is a PC-based system with a flat screen monitor and an attached camera that is then mounted on a remotely controlled platform. This device is controlled from a remotely placed PC-based videoconferencing system computer outfitted with a joystick. Using the public Internet and a wireless router at the client site, a surgeon at the control station can manipulate the videoconferencing system. Controls include navigating the unit around the room and moving the flat screen/camera portion like a head looking up/down and right/left. This system (InTouch Medical, Santa Barbara, CA) was used to proctor medical students during an anatomy class cadaver dissection. The ability of the remote surgeon to effectively monitor the students' dissections and direct their activities was assessed subjectively by students and surgeon. This device was very effective at providing a controllable and interactive presence in the anatomy lab. Students felt they were interacting with a person rather than a video screen and quickly forgot that the surgeon was not in the room. The ability to move the device within the environment rather than just observe the environment from multiple fixed camera angles gave the surgeon a similar feel of true presence. A remote-controlled videoconferencing system provides a more real experience for both student and proctor. Future development of such a device could greatly facilitate progress in implementation of remote presence proctoring.

  7. Supervisory control based on minimal cuts and Petri net sub-controllers coordination

    Rezig, Sadok; Achour, Zied; Rezg, Nidhal; Kammoun, Mohamed-Ali


    This paper addresses the synthesis of Petri net (PN) controller for the forbidden state transition problem with a new utilisation of the theory of regions. Moreover, as any method of control synthesis based on a reachability graph, the theory of regions suffers from the combinatorial explosion problem. The proposed work minimises the number of equations in the linear system of theory of regions and therefore one can reduce the computation time. In this paper, two different approaches are proposed to select minimal cuts in the reachability graph in order to synthesise a PN controller. Thanks to a switch from one cut to another, one can activate and deactivate the corresponding PNcontroller. An application is implemented in a flexible manufacturing system to illustrate the present method. Finally, comparison with previous works with experimental results in obtaining a maximally permissive controller is presented.

  8. Prediction and Control of Cutting Tool Vibration in Cnc Lathe with Anova and Ann

    S. S. Abuthakeer


    Full Text Available Machining is a complex process in which many variables can deleterious the desired results. Among them, cutting tool vibration is the most critical phenomenon which influences dimensional precision of the components machined, functional behavior of the machine tools and life of the cutting tool. In a machining operation, the cutting tool vibrations are mainly influenced by cutting parameters like cutting speed, depth of cut and tool feed rate. In this work, the cutting tool vibrations are controlled using a damping pad made of Neoprene. Experiments were conducted in a CNC lathe where the tool holder is supported with and without damping pad. The cutting tool vibration signals were collected through a data acquisition system supported by LabVIEW software. To increase the buoyancy and reliability of the experiments, a full factorial experimental design was used. Experimental data collected were tested with analysis of variance (ANOVA to understand the influences of the cutting parameters. Empirical models have been developed using analysis of variance (ANOVA. Experimental studies and data analysis have been performed to validate the proposed damping system. Multilayer perceptron neural network model has been constructed with feed forward back-propagation algorithm using the acquired data. On the completion of the experimental test ANN is used to validate the results obtained and also to predict the behavior of the system under any cutting condition within the operating range. The onsite tests show that the proposed system reduces the vibration of cutting tool to a greater extend.

  9. An intelligent remote control system for ECEI on EAST

    Chen, Dongxu; Zhu, Yilun; Zhao, Zhenling; Qu, Chengming; Liao, Wang; Xie, Jinlin; Liu, Wandong


    An intelligent remote control system based on a power distribution unit (PDU) and Arduino has been designed for the electron cyclotron emission imaging (ECEI) system on Experimental Advanced Superconducting Tokamak (EAST). This intelligent system has three major functions: ECEI system reboot, measurement region adjustment and signal amplitude optimization. The observation region of ECEI can be modified for different physics proposals by remotely tuning the optical and electronics systems. Via the remote adjustment of the attenuation level, the ECEI intermediate frequency signal amplitude can be efficiently optimized. The remote control system provides a feasible and reliable solution for the improvement of signal quality and the efficiency of the ECEI diagnostic system, which is also valuable for other diagnostic systems.

  10. Controlled remote implementation of partially unknown quantum operation

    FAN QiuBo; LIU DongDong


    A protocol for controlled remote implementation of a partially unknown operation on an arbitrary quantum state is proposed. In this protocol, a task can be performed using a GHZ state shared among three distant parties: Alice, Bob and the controller Charlie. This protocol is also generalized to the multi-party control system based on sharing an N-qubit GHZ state.

  11. Remote Controlling of Light Intensity Using Phone Devices

    Beza Negash Getu


    Full Text Available In this study, we investigate the design and simulation of an electronic system for remote controlling the level of light intensity of an electrical lighting system used for a certain desired application. The remote controlling is done using the keypad of any Dual Tone Multi Frequency (DTMF based telephone handset. A DTMF tone command sent from a transmitting fixed or mobile phone terminal will be used to activate a system of relays that control the required level of light intensity. An appropriate active bandpass filters are designed for recognition of the DTMF tones of the transmitted digit. The bandpass filters and the additional subsequent stages of the overall electronic system are simulated and tested using MULTISM. Light intensity controlling is useful to avoid unnecessary electrical power wastage and the remote controlling eliminates the physical presence of a person for adjusting the required level of lighting at the desired location.

  12. Remote control of microcontroller-based infant stimulating system.

    Burunkaya, M; Güler, I


    In this paper, a remote-controlled and microcontroller-based cradle is designed and constructed. This system is also called Remote Control of Microcontroller-Based Infant Stimulation System or the RECOMBIS System. Cradle is an infant stimulating system that provides relaxation and sleeping for the baby. RECOMBIS system is designed for healthy full-term newborns to provide safe infant care and provide relaxation and sleeping for the baby. A microcontroller-based electronic circuit was designed and implemented for RECOMBIS system. Electromagnets were controlled by 8-bit PIC16F84 microcontroller, which is programmed using MPASM package. The system works by entering preset values from the keyboard, or pulse code modulated radio frequency remote control system. The control of the system and the motion range were tested. The test results showed that the system provided a good performance.

  13. Expert operator preferences in remote manipulator control systems

    Sundstrom, E. [Human Machine Interfaces, Inc., Knoxville, TN (United States); Draper, J.V. [Oak Ridge National Lab., TN (United States); Fausz, A.; Woods, H. [Univ. of Tennessee, Knoxville, TN (United States)


    This report describes a survey of expert remote manipulator operators designed to identify features of control systems related to operator efficiency and comfort. It provides information for designing the control center for the Single-Shell Tank Waste Retrieval Manipulator System (TWRMS) Test Bed, described in a separate report. Research questions concerned preferred modes of control, optimum work sessions, sources of operator fatigue, importance of control system design features, and desired changes in control rooms. Participants comprised four expert remote manipulator operators at Oak Ridge National Laboratory, who individually have from 9 to 20 years of experience using teleoperators. The operators had all used rate and position control, and all preferred bilateral (force-reflecting) position control. They reported spending an average of 2.75 h in control of a teleoperator system during a typical shift. All were accustomed to working in a crew of two and alternating control and support roles in 2-h rotations in an 8-h shift. Operators reported that fatigue in using remote manipulator systems came mainly from watching TV monitors and making repetitive motions. Three of four experienced symptoms, including headaches and sore eyes, wrists, and back. Of 17 features of control rooms rated on importance, highest ratings went to comfort and support provided by the operator chair, location of controls, location of video monitors, video image clarity, types of controls, and control modes. When asked what they wanted to change, operators said work stations designed for comfort; simpler, lighter hand-controls; separate controls for each camera; better placement of remote camera; color monitors; and control room layouts that support crew interaction. Results of this small survey reinforced the importance of ergonomic factors in remote manipulation.


    A. S. Dorosh


    Full Text Available Purpose. The application of automation systems of breaking up process on the gravity hump is the efficiency improvement of their operation, absolute provision of trains breaking up safety demands, as well as improvement of hump staff working conditions. One of the main tasks of the indicated systems is the assurance of cuts reliable separation at all elements of their rolling route to the classification track. This task is a sophisticated optimization problem and has not received a final decision. Therefore, the task of determining the cuts braking mode is quite relevant. The purpose of this research is to find the optimal braking mode of control cut of design group. Methodology. In order to achieve the purpose is offered to use the direct search methods in the work, namely the Box complex method. This method does not require smoothness of the objective function, takes into account its limitations and does not require calculation of the function derivatives, and uses only its value. Findings. Using the Box method was developed iterative procedure for determining the control cut optimal braking mode of design group. The procedure maximizes the smallest controlled time interval in the group. To evaluate the effectiveness of designed procedure the series of simulation experiments of determining the control cut braking mode of design group was performed. The results confirmed the efficiency of the developed optimization procedure. Originality. The author formalized the task of optimizing control cut braking mode of design group, taking into account the cuts separation of design group at all elements (switches, retarders during cuts rolling to the classification track. The problem of determining the optimal control cut braking mode of design group was solved. The developed braking mode ensures cuts reliable separation of the group not only at the switches but at the retarders of brake position. Practical value. The developed procedure can be

  15. Control and robotics remote laboratory for engineering education

    Gregor Pačnik


    Full Text Available The new tools for education of engineering emerged and one of the most promising is a remote rapid control prototyping (RRCP, which is very useful also for control and robotics development in industry and in education. Examples of introductory remote control and simple robotics courses with integrated hands on experiments are presented in the paper. The aim of integration of remote hands on experiments into control and/or robotics course is to minimize the gap between the theory and practice to teach students the use of RRCP and to decrease the education costs. Developed RRCP experiments are based on MATLAB/Simulink, xPC target, custom developed embedded target

  16. The automation of remote vehicle control. [in Mars roving vehicles

    Paine, G.


    The automation of remote vehicles is becoming necessary to overcome the requirement of having man present as a controller. By removing man, remote vehicles can be operated in areas where the environment is too hostile for man, his reaction times are too slow, time delays are too long, and where his presence is too costly, or where system performance can be improved. This paper addresses the development of automated remote vehicle control for nonspace and space tasks from warehouse vehicles to proposed Mars rovers. The state-of-the-art and the availability of new technology for implementing automated control are reviewed and the major problem areas are outlined. The control strategies are divided into those where the path is planned in advance or constrained, or where the system is a teleoperator, or where automation or robotics have been introduced.

  17. "O.K. Where's the Remote?" Children, Families, and Remote Control Devices.

    Krendl, Kathy A.; And Others

    This paper, part of a larger study of new television technologies, examines how preschool children integrate remote control devices (RCDs) into their television viewing behavior, preschoolers' competence with and knowledge of RCDs, and the role of the RCD in shaping family viewing styles. Subjects, 50 children aged 4 to 6 years attending 3…

  18. Measurement and control system for ITER remote maintenance equipment

    Oka, Kiyoshi; Kakudate, Satoshi; Takeda, Nobukazu; Takiguchi, Yuji; Akou, Kentaro [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment


    ITER in-vessel components such as blankets and divertors are categorized as scheduled maintenance components because they are subjected to severe plasma heat and particle loads. Blanket maintenance requires remote handling equipment and tools able to handle Heavy payloads of about 4 tons within a 2 mm precision tolerance. Divertor maintenance requires remote replacement of 60 cassettes with a dead weight of about 25 tons each. In the ITER R and D program, full-scale remote handling equipment for blanket and divertor maintenance has been designed and assembled for demonstration tests. This paper reviews the measurement and control system developed for full-scale remote handling equipment, the Japan Home Team contribution. (author)

  19. Synthesis of the unmanned aerial vehicle remote control augmentation system

    Tomczyk, Andrzej, E-mail: [Department of Avionics and Control Systems, Faculty of Mechanical Engineering and Aeronautics, Rzeszów University of Technology, Al. Powstañców Warszawy 12, 35-959 Rzeszów (Poland)


    Medium size Unmanned Aerial Vehicle (UAV) usually flies as an autonomous aircraft including automatic take-off and landing phases. However in the case of the on-board control system failure, the remote steering is using as an emergency procedure. In this reason, remote manual control of unmanned aerial vehicle is used more often during take-of and landing phases. Depends on UAV take-off mass and speed (total energy) the potential crash can be very danger for airplane and environment. So, handling qualities of UAV is important from pilot-operator point of view. In many cases the dynamic properties of remote controlling UAV are not suitable for obtaining the desired properties of the handling qualities. In this case the control augmentation system (CAS) should be applied. Because the potential failure of the on-board control system, the better solution is that the CAS algorithms are placed on the ground station computers. The method of UAV handling qualities shaping in the case of basic control system failure is presented in this paper. The main idea of this method is that UAV reaction on the operator steering signals should be similar - almost the same - as reaction of the 'ideal' remote control aircraft. The model following method was used for controller parameters calculations. The numerical example concerns the medium size MP-02A UAV applied as an aerial observer system.

  20. Remote control of a mobile platform with a smartphone

    Majcen, Gregor


    This thesis describes a system for remote control of a mobile platform using a smartphone. As a mobile platform is used an iRobot Roomba vacuum cleaner equipped with a wireless router and a camera. The mobile platform and the smartphone communicate over the internet. The smartphone is used as a gaming console to control the movement of the mobile platform.

  1. Synthesis of the unmanned aerial vehicle remote control augmentation system

    Tomczyk, Andrzej


    Medium size Unmanned Aerial Vehicle (UAV) usually flies as an autonomous aircraft including automatic take-off and landing phases. However in the case of the on-board control system failure, the remote steering is using as an emergency procedure. In this reason, remote manual control of unmanned aerial vehicle is used more often during take-of and landing phases. Depends on UAV take-off mass and speed (total energy) the potential crash can be very danger for airplane and environment. So, handling qualities of UAV is important from pilot-operator point of view. In many cases the dynamic properties of remote controlling UAV are not suitable for obtaining the desired properties of the handling qualities. In this case the control augmentation system (CAS) should be applied. Because the potential failure of the on-board control system, the better solution is that the CAS algorithms are placed on the ground station computers. The method of UAV handling qualities shaping in the case of basic control system failure is presented in this paper. The main idea of this method is that UAV reaction on the operator steering signals should be similar - almost the same - as reaction of the "ideal" remote control aircraft. The model following method was used for controller parameters calculations. The numerical example concerns the medium size MP-02A UAV applied as an aerial observer system.

  2. Dynamic User Role Assignment in Remote Access Control

    Saffarian, Mohsen; Tang, Qiang; Jonker, Willem; Hartel, Pieter


    The Role-Based Access Control (RBAC) model has been widely applied to a single domain in which users are known to the administrative unit of that domain, beforehand. However, the application of the conventional RBAC model for remote access control scenarios is not straightforward. In such scenarios,

  3. Dynamic User Role Assignment in Remote Access Control

    Saffarian, M.; Tang, Qiang; Jonker, Willem; Hartel, Pieter H.


    The Role-Based Access Control (RBAC) model has been widely applied to a single domain in which users are known to the administrative unit of that domain, beforehand. However, the application of the conventional RBAC model for remote access control scenarios is not straightforward. In such scenarios,

  4. Performing Active Noise Control and Acoustic Experiments Remotely

    Imran Khan


    Full Text Available This paper presents a novel and advanced remotely controlled laboratory for conducting Active Noise Control (ANC, acoustic and Digital Signal Processing (DSP experiments. The laboratory facility, recently developed by Blekinge Institute of Technology (BTH Sweden, supports remote learning through internet covering beginners level such as simple experimental measurements to advanced users and even researchers such as algorithm development and their performance evaluation on DSP. The required software development for ANC algorithms and equipment control are carried out anywhere in the world remotely from an internet-connected client PC using a standard web browser. The paper describes in detail how ANC, acoustic and DSP experiments can be performed remotely The necessary steps involved in an ANC experiment such as validity of ANC, forward path estimation and active control applied to a broad band random noise [0-200Hz] in a ventilation duct will be described in detail. The limitations and challenges such as the forward path and nonlinearities pertinent to the remote laboratory setup will be described for the guidance of the user. Based on the acoustic properties of the ventilation duct some of the possible acoustic experiments such as mode shapes analysis and standing waves analysis etc. will also be discussed in the paper.

  5. Remote Neural Pendants In A Welding-Control System

    Venable, Richard A.; Bucher, Joseph H.


    Neural network integrated circuits enhance functionalities of both remote terminals (called "pendants") and communication links, without necessitating installation of additional wires in links. Makes possible to incorporate many features into pendant, including real-time display of critical welding parameters and other process information, capability for communication between technician at pendant and host computer or technician elsewhere in system, and switches and potentiometers through which technician at pendant exerts remote control over such critical aspects of welding process as current, voltage, rate of travel, flow of gas, starting, and stopping. Other potential manufacturing applications include control of spray coating and of curing of composite materials. Potential nonmanufacturing uses include remote control of heating, air conditioning, and lighting in electrically noisy and otherwise hostile environments.

  6. Surface Tension of Methanol as a Function of cut-off Radius and Temperature Controllers

    Obeidat, Abdalla; Jaradat, Adnan; Hamdan, Bushra

    Molecular dynamics is used to calculate the surface tension of van Leeuwen methanol. The van Leeuwen model of methanol is chosen over other models of methanol, since this model is widely used to study nucleation at low temperature. Usually, scientists use the cut-off radius to be three order of magnitude of segment diameter. In this study, we varied the cut-off radius to estimate the best cut-off at which the surface tension reaches its plateau. After deciding the best cut-off radius for van der Waals and Coulomb interactions (CUT-OFF and PME were used for Coulomb interaction), we varied the temperature controller (van-Housen, Berendsen, and v-rescale) to decide the best temperature controller to be used to study methanol. In all simulations, Gromacs is used at T =200-300K with periodic boundary conditions in all dimensions. JUST.

  7. Cutting wild grapevines as a cultural control strategy for grape berry moth (Lepidoptera: Tortricidae).

    Jenkins, Paul E; Isaacs, Rufus


    A 3-yr field study was conducted at commercial grape farms to evaluate cutting wild grapevines as a cultural control strategy for grape berry moth, Paralobesia viteana (Clemens). At each farm, wild grapevines were cut in the woods adjacent to one vineyard for control of P. viteana, whereas the comparison vineyard received no such cutting. Both vineyards received a standard broad-spectrum insecticide program for control of P. viteana and other vineyard insect pests. Monitoring with pheromone traps showed no differences between treatments in the total number of male moths trapped in both woods and vineyards. Egglaying by P. viteana was similar between the two wild grape cutting treatments in all 3 yr. During weekly samples of crop infestation by P. viteana, no differences were observed between programs in the percent of clusters infested by P. viteana larvae. Berries infested by P. viteana were collected from vineyard borders during the second and third P. viteana generations and held under controlled conditions. In all but one sample, survival of P. viteana larvae was similar between the two wild grape cutting treatments, parasitism of P. viteana larvae within vineyards was similar between the two wild grape cutting treatments on all sample dates, and similar captures of natural enemies were found on yellow sticky traps in the two treatments throughout the study. The opportunities and benefits of cutting wild grapevines as a cultural control in grape integrated pest management programs in eastern North America are discussed.

  8. General-Purpose Serial Interface For Remote Control

    Busquets, Anthony M.; Gupton, Lawrence E.


    Computer controls remote television camera. General-purpose controller developed to serve as interface between host computer and pan/tilt/zoom/focus functions on series of automated video cameras. Interface port based on 8251 programmable communications-interface circuit configured for tristated outputs, and connects controller system to any host computer with RS-232 input/output (I/O) port. Accepts byte-coded data from host, compares them with prestored codes in read-only memory (ROM), and closes or opens appropriate switches. Six output ports control opening and closing of as many as 48 switches. Operator controls remote television camera by speaking commands, in system including general-purpose controller.

  9. Remote Power Control of Ethernet PON System

    Inkwun Jung; Chunghwan Lim; Youngil Park


    A power control scheme to make all ONU channels’ power received at OLT nearly equal is proposed. Implemented by monitoring powers at OLT and sending control message to each ONU, it helps data recovery from the burst type upstream optical signals.

  10. Remote Power Control of Ethernet PON System

    Inkwun; Jung; Chunghwan; Lim; Youngil; Park


    A power control scheme to make all ONU channels' power received at OLT nearly equal is proposed. Implemented by monitoring powers at OLT and sending control message to each ONU, it helps data recovery from the burst type upstream optical signals.

  11. Instrument Remote Control via the Astronomical Instrument Markup Language

    Sall, Ken; Ames, Troy; Warsaw, Craig; Koons, Lisa; Shafer, Richard


    The Instrument Remote Control (IRC) project ongoing at NASA's Goddard Space Flight Center's (GSFC) Information Systems Center (ISC) supports NASA's mission by defining an adaptive intranet-based framework that provides robust interactive and distributed control and monitoring of remote instruments. An astronomical IRC architecture that combines the platform-independent processing capabilities of Java with the power of Extensible Markup Language (XML) to express hierarchical data in an equally platform-independent, as well as human readable manner, has been developed. This architecture is implemented using a variety of XML support tools and Application Programming Interfaces (API) written in Java. IRC will enable trusted astronomers from around the world to easily access infrared instruments (e.g., telescopes, cameras, and spectrometers) located in remote, inhospitable environments, such as the South Pole, a high Chilean mountaintop, or an airborne observatory aboard a Boeing 747. Using IRC's frameworks, an astronomer or other scientist can easily define the type of onboard instrument, control the instrument remotely, and return monitoring data all through the intranet. The Astronomical Instrument Markup Language (AIML) is the first implementation of the more general Instrument Markup Language (IML). The key aspects of our approach to instrument description and control applies to many domains, from medical instruments to machine assembly lines. The concepts behind AIML apply equally well to the description and control of instruments in general. IRC enables us to apply our techniques to several instruments, preferably from different observatories.

  12. Development of Automatic Remote Exposure Controller for Gamma Radiography

    Joo, Gwang Tae; Shin, Jin Seong; Kim, Dong Eun; Song, Jung Ho; Choo, Seung Hwan; Chang, Hong Keun [Korea Industrial Testing Co., Ltd., Seoul (Korea, Republic of)


    Recently, gamma radiographic equipment have been used about 1,000 sets manually and operated by about 2,500 persons in Korea. In order for a radiography to work effectively with avoiding any hazard of the high level radiation from the source, many field workers have expected developing a wireless automatic remote exposure controller. The KlTCO research team has developed an automatic remote exposure controller that can regulate the speed of 0.4{approx}1.2m/s by BLDC motor of 24V 200W which has output of 54 kgf{center_dot}, suitable torque and safety factor for the work. And the developed automatic remote exposure controller can control rpm of motor, pigtail position by photo-sensor and exposure time by timer to RF sensor. Thus, the developed equipment is expected that the unit can be used in many practical applications with benefits in economical advantage to combine the use of both automatic and manual type because attachment is possible existent manual remote exposure controller, AC and DC combined use

  13. Control of water erosion and sediment in open cut coal mines in tropical areas

    Ueda, T.; Nugraha, C.; Matsui, K.; Shimada, H.; Ichinose, M.; Gottfried, J. [Kyushu University, Fukuoka (Japan). Department of Earth Resources Engineering


    The purpose is to reduce the environmental impacts from open cut mining in tropical areas, such as Indonesia and Vietnam. Research conducted on methods for the control of water erosion and sediment from open cut coal mines is described. Data were collected on climate and weathering in tropical areas, mechanism of water erosion and sedimentation, characteristics of rocks in coal measures under wet conditions, water management at pits and haul roads and ramps, and construction of waste dumps and water management. The results will be applied to the optimum control and management of erosion and sediments in open cut mining. 6 refs., 8 figs.

  14. Remote Control of a Mobile Robot for Indoor Patrol

    Shih-Yao Juang


    Full Text Available This study applies smartphone, Bluetooth, and Wi-Fi wireless network to control a wheeled mobile robot (WMR remotely. The first part of this study demonstrates that the WMR can be controlled manually by a smartphone. The smartphone can remotely control the WMR for forward, backward, left-turn, and right-turn operations. The second part of this article presents object tracking. The WMR can follow a moving object through the use of image processing for object tracking and distance detection. In the third part, infrared sensor and fuzzy system algorithms are integrated into the control scheme. Through wall-following and obstacle-avoidance control, the WMR can successfully perform indoor patrol.

  15. Google glass-based remote control of a mobile robot

    Yu, Song; Wen, Xi; Li, Wei; Chen, Genshe


    In this paper, we present an approach to remote control of a mobile robot via a Google Glass with the multi-function and compact size. This wearable device provides a new human-machine interface (HMI) to control a robot without need for a regular computer monitor because the Google Glass micro projector is able to display live videos around robot environments. In doing it, we first develop a protocol to establish WI-FI connection between Google Glass and a robot and then implement five types of robot behaviors: Moving Forward, Turning Left, Turning Right, Taking Pause, and Moving Backward, which are controlled by sliding and clicking the touchpad located on the right side of the temple. In order to demonstrate the effectiveness of the proposed Google Glass-based remote control system, we navigate a virtual Surveyor robot to pass a maze. Experimental results demonstrate that the proposed control system achieves the desired performance.

  16. Building Integrated Remote Control Systems for Electronics Boards

    Jacobsson, R


    This paper addresses several aspects of implementing a remote control system for a large number of electronics boards in order to perform remote Field Programmable Gate Array (FPGA) programming, hardware configuration, data register access, and monitoring, as well as interfacing it to an expert system. The paper presents a common strategy for the representation of the boards in the abstraction layer of the control system, and generic communication protocols for the access to the board resources. In addition, an implementation is proposed in which the mapping between the functional parameters and the physical registers of the different boards is represented by descriptors in the board representation such that the translation can be handled automatically by a generic translation manager. Using the Distributed Information Management (DIM) package for the control communication with the boards, and the industry SCADA system PVSS II from ETM, a complete control system has been built for the Timing and Fast Control ...

  17. Challenges for remote monitoring and control of small reactors

    Trask, D., E-mail: [Atomic Energy of Canada Limited, Fredericton, New Brunswick (Canada)


    This paper considers a model for small, unmanned, remotely located reactors and discusses the ensuing cyber security and operational challenges for monitoring and control and how these challenges might be overcome through some of AECL's research initiatives and experience. (author)

  18. Remote control circuit breaker evaluation testing. [for space shuttles

    Bemko, L. M.


    Engineering evaluation tests were performed on several models/types of remote control circuit breakers marketed in an attempt to gain some insight into their potential suitability for use on the space shuttle vehicle. Tests included the measurement of several electrical and operational performance parameters under laboratory ambient, space simulation, acceleration and vibration environmental conditions.

  19. A Flexible and Configurable Architecture for Automatic Control Remote Laboratories

    Kalúz, Martin; García-Zubía, Javier; Fikar, Miroslav; Cirka, Luboš


    In this paper, we propose a novel approach in hardware and software architecture design for implementation of remote laboratories for automatic control. In our contribution, we show the solution with flexible connectivity at back-end, providing features of multipurpose usage with different types of experimental devices, and fully configurable…

  20. Remote control circuit breaker evaluation testing. [for space shuttles

    Bemko, L. M.


    Engineering evaluation tests were performed on several models/types of remote control circuit breakers marketed in an attempt to gain some insight into their potential suitability for use on the space shuttle vehicle. Tests included the measurement of several electrical and operational performance parameters under laboratory ambient, space simulation, acceleration and vibration environmental conditions.

  1. VME-based remote instrument control without ground loops

    Belleman, J; González, J L


    New electronics has been developed for the remote control of the pick-up electrodes at the CERN Proton Synchrotron (PS). Communication between VME-based control computers and remote equipment is via full duplex point-to-point digital data links. Data are sent and received in serial format over simple twisted pairs at a rate of 1 Mbit/s, for distances of up to 300 m. Coupling transformers are used to avoid ground loops. The link hardware consists of a general-purpose VME-module, the 'TRX' (transceiver), containing four FIFO-buffered communication channels, and a dedicated control card for each remote station. Remote transceiver electronics is simple enough not to require micro-controllers or processors. Currently, some sixty pick-up stations of various types, all over the PS Complex (accelerators and associated beam transfer lines) are equipped with the new system. Even though the TRX was designed primarily for communication with pick-up electronics, it could also be used for other purposes, for example to for...

  2. Millikan's Oil-Drop Experiment as a Remotely Controlled Laboratory

    Eckert, Bodo; Grober, Sebastian; Vetter, Martin; Jodl, Hans-Jorg


    The Millikan oil-drop experiment, to determine the elementary electrical charge e and the quantization of charge Q = n [middle dot] e, is an essential experiment in physics teaching but it is hardly performed in class for several reasons. Therefore, we offer this experiment as a remotely controlled laboratory (RCL). We describe the interactivity…

  3. Remote Control of an Inverted Pendulum System for Intelligent Control Education

    Seul Jung


    Full Text Available This paper presents a remote control task of an inverted pendulum system for intelligent control education. The inverted pendulum moving on the guided rail is required to maintain balancing while it follows the desired trajectory commanded remotely by a joystick operated by a user. Position commands for the inverted pendulum system are given by a joystick through the network. The inverted pendulum system is controlled by a neural network control method. The corresponding control results are confirmed through experimental studies.

  4. Computational Architecture For Control Of Remote Manipulator

    Szakaly, Zoltan F.


    Synchronization done by hardware to reduce software overhead. Computing resources located at both master-arm node and slave-arm node. This architecture provides for effective control while reducing computational burden on host computer and reducing and balancing load on communication channel.

  5. Modernization Of Electrical Installation By Using Wireless Remote Control

    Mawlood M Al – Hamad


    Full Text Available Great benefits can be achieved by using wireless remote control in electrical wiring systems of buildings.     Probably the main advantage of this application is the drastic saving in wiring installations, which in turn will give higher reliability, safety and economy.     The idea of this application can be summarized in the following explanation. '' Instead off connecting each point of electrical system to individual switch by wires, a remote receiver can be situated in a place near to the point. The transmitter is used to operate the point remotely. The mains are connected to the receiver which will connect or disconnect the load as required. Many points can be connected to one receiver and can be operated by one or more transmitter.


    S.V. Shavetov


    Full Text Available The paper deals with the architecture for the universal remote control system of robotics objects over the Internet global network. Control objects are assumed to be located at a considerable distance from a reference device or end-users. An overview of studies on the subject matter of remote control of technical objects is given. A structure chart of the architecture demonstrating the system usage in practice is suggested. Server software is considered that makes it possible to work with technical objects connected to the server as with a serial port and organize a stable tunnel connection between the controlled object and the end-user. The proposed architecture has been successfully tested on mobile robots Parallax Boe-Bot and Lego Mindstorms NXT. Experimental data about values of time delays are given demonstrating the effectiveness of the considered architecture.

  7. Building Integrated Remote Control Systems for Electronic Boards

    Jacobsson, Richard


    This paper addresses several aspects of implementing a remote control system for a large number of electronics boards in order to perform remote Field Programmable Gate Array (FPGA) programming, hardware configuration, data register access, and monitoring, as well as interfacing it to a configuration database and an expert system. The paper presents a common strategy for the representation of the boards in the abstraction layer of the control system, and generic communication protocols for the access to the board resources. In addition, an implementation is proposed in which the mapping between the functional parameters and the physical registers of the different boards is represented by descriptors in the board representation such that the translation can be handled automatically by a generic translation manager. Using the Distributed Information Management (DIM) package for the control communication with the boards, and the industry SCADA system PVSS II from ETM, a complete control system has been built for...

  8. Development and Applications for the Remote Controllable Atomic Force Microscope

    Fornaro, P.; Guggisberg, M.; Gyalog, T.; Wattinger, Ch.; Meyer, E.; Güntherodt, H.-J.


    We present a fully remote controllable AFM, featuring a motorized four-axis sample stage. The low cost robotics allows a fast and accurate change of pre-defined positions. Due to the software interface the instrument can be programmed to perform sequences of measurements. This allows the automated acquisition of large scale high resolution images. The instrument can be controlled and monitored from various locations using a standard network interface.

  9. Encryption for Remote Control via Internet or Intranet

    Lineberger, Lewis


    A data-communication protocol has been devised to enable secure, reliable remote control of processes and equipment via a collision-based network, while using minimal bandwidth and computation. The network could be the Internet or an intranet. Control is made secure by use of both a password and a dynamic key, which is sent transparently to a remote user by the controlled computer (that is, the computer, located at the site of the equipment or process to be controlled, that exerts direct control over the process). The protocol functions in the presence of network latency, overcomes errors caused by missed dynamic keys, and defeats attempts by unauthorized remote users to gain control. The protocol is not suitable for real-time control, but is well suited for applications in which control latencies up to about 0.5 second are acceptable. The encryption scheme involves the use of both a dynamic and a private key, without any additional overhead that would degrade performance. The dynamic key is embedded in the equipment- or process-monitor data packets sent out by the controlled computer: in other words, the dynamic key is a subset of the data in each such data packet. The controlled computer maintains a history of the last 3 to 5 data packets for use in decrypting incoming control commands. In addition, the controlled computer records a private key (password) that is given to the remote computer. The encrypted incoming command is permuted by both the dynamic and private key. A person who records the command data in a given packet for hostile purposes cannot use that packet after the public key expires (typically within 3 seconds). Even a person in possession of an unauthorized copy of the command/remote-display software cannot use that software in the absence of the password. The use of a dynamic key embedded in the outgoing data makes the central-processing unit overhead very small. The use of a National Instruments DataSocket(TradeMark) (or equivalent) protocol or

  10. Design of a remote controlled hovercraft

    Álvarez Sánchez, David


    Este informe trata el diseño, desarrollo y construcción de un aerodeslizador de pequeño tamaño, equipado con control remoto que permite al usuario actuar sobre la velocidad y dirección del mismo. Este proyecto podrá ser utilizado en un futuro como base para el desarrollo de aplicaciones más complejas. Un aerodeslizador es un medio de transporte cuyo chasis se eleva sobre el suelo por medio de un motor impulsor que hincha una falda colocada en la parte inferior del mismo. Además, uno ...

  11. Remote control of self-assembled microswimmers

    Grosjean, Galien; Darras, Alexis; Hubert, Maxime; Lumay, Geoffroy; Vandewalle, Nicolas


    Physics governing the locomotion of microorganisms and other microsystems is dominated by viscous damping. An effective swimming strategy involves the non-reciprocal and periodic deformations of the considered body. Here, we show that a magnetocapillary-driven self-assembly, composed of three soft ferromagnetic beads, is able to swim along a liquid-air interface when powered by an external magnetic field. More importantly, we demonstrate that trajectories can be fully controlled, opening ways to explore low Reynolds number swimming. This magnetocapillary system spontaneously forms by self-assembly, allowing miniaturization and other possible applications such as cargo transport or solvent flows.

  12. Mechanism and practice of rock control in deep large span cut holes

    Li Chong; Xu Jinhai; Fu Chunsheng; Wu Rui; Ma Qianqian


    Deep large span cut holes are difficult to stabilize.The 7801 cut hole in the Lu'an Wuyang Mine was used as this project's background.The main factors affecting large span cut hole stability are analyzed.Prestressed bolting theory was used to design a roof control method for a large span roadway.By reducing the span and applying equal strength coordinated supports the rock could be stabilized.The control principles and methods are given herein along with the analysis.A double micro arch cross section roadway is defined and its use in solving the current problem is described.Beam arch theory was used to build a model of the double micro arch cross section roadway.A support reverse force model for the arch foot intersection was also derived.A support method based upon reducing the width of the large span in the cut hole is presented.These results show that the reduced span of the roadway roof plus the use of cable anchors and single supports gives an effective way to control the large span cut hole.On site monitoring showed that the reduced span support from the double micro arch cross section roadway design had a significant effect.The roadway surface displacement was small and harmful deformation of the cut hole was effectively controlled.This will ensure its long term stability.

  13. Controlling Malaria and Other Diseases Using Remote Sensing

    Kiang, Richard K.; Wharton, Stephen W. (Technical Monitor)


    Remote sensing offers the vantage of monitoring a vast area of the Earth continuously. Once developed and launched, a satellite gives years of service in collecting data from the land, the oceans, and the atmosphere. Since the 1980s, attempts have been made to relate disease occurrence with remotely sensed environmental and geophysical parameters, using data from Landsat, SPOT, AVHRR, and other satellites. With higher spatial resolution, the recent satellite sensors provide a new outlook for disease control. At sub-meter to I 10m resolution, surface types associated with disease carriers can be identified more accurately. The Ikonos panchromatic sensor with I m resolution, and the Advanced Land Imager with 1 Om resolution on the newly launched Earth Observing-1, both have displayed remarkable mapping capabilities. In addition, an entire array of geophysical parameters can now be measured or inferred from various satellites. Airborne remote sensing, with less concerns on instrument weight, size, and power consumption, also offers a low-cost alternative for regional applications. NASA/GSFC began to collaborate with the Mahidol University on malaria and filariasis control using remote sensing in late 2000. The objectives are: (1) To map the breeding sites for the major vector species; (2) To identify the potential sites for larvicide and insecticide applications; (3) To explore the linkage of vector population and transmission intensity to environmental variables; (4) To monitor the impact of climate change and human activities on vector population and transmission; and (5) To develop a predictive model for disease distribution. Field studies are being conducted in several provinces in Thailand. Data analyses will soon begin. Malaria data in South Korea are being used as surrogates for developing classification techniques. GIS has been shown to be invaluable in making the voluminous remote sensing data more readily understandable. It will be used throughout this study

  14. Remote network control plasma diagnostic system for Tokamak T-10

    Troynov, V. I.; Zimin, A. M.; Krupin, V. A.; Notkin, G. E.; Nurgaliev, M. R.


    The parameters of molecular plasma in closed magnetic trap is studied in this paper. Using the system of molecular diagnostics, which was designed by the authors on the «Tokamak T-10» facility, the radiation of hydrogen isotopes at the plasma edge is investigated. The scheme of optical radiation registration within visible spectrum is described. For visualization, identification and processing of registered molecular spectra a new software is developed using MatLab environment. The software also includes electronic atlas of electronic-vibrational-rotational transitions for molecules of protium and deuterium. To register radiation from limiter cross-section a network control system is designed using the means of the Internet/Intranet. Remote control system diagram and methods are given. The examples of web-interfaces for working out equipment control scenarios and viewing of results are provided. After test run in Intranet, the remote diagnostic system will be accessible through Internet.

  15. 46 CFR 62.35-5 - Remote propulsion-control systems.


    ... 46 Shipping 2 2010-10-01 2010-10-01 false Remote propulsion-control systems. 62.35-5 Section 62.35... AUTOMATION Requirements for Specific Types of Automated Vital Systems § 62.35-5 Remote propulsion-control systems. (a) Manual propulsion control. All vessels having remote propulsion control from the...

  16. 47 CFR 80.1183 - Remote control for maneuvering or navigation.


    ... 47 Telecommunication 5 2010-10-01 2010-10-01 false Remote control for maneuvering or navigation... Communications § 80.1183 Remote control for maneuvering or navigation. (a) An on-board station may be used for remote control of maneuvering or navigation control systems aboard the same ship or, where that ship...

  17. Conceptual design of Remote Control System for EAST tokamak

    Sun, X.Y., E-mail:; Wang, F.; Wang, Y.; Li, S.


    Highlights: • A new design conception for remote control for EAST tokamak is proposed. • Rich Internet application (RIA) was selected to implement the user interface. • Some security mechanism was used to fulfill security requirement. - Abstract: The international collaboration becomes popular in tokamak research like in many other fields of science, because the experiment facilities become larger and more expensive. The traditional On-site collaboration Model that has to spend much money and time on international travel is not fit for the more frequent international collaboration. The Remote Control System (RCS), as an extension of the Central Control System for the EAST tokamak, is designed to provide an efficient and economical way to international collaboration. As a remote user interface, the RCS must integrate with the Central Control System for EAST tokamak to perform discharge control function. This paper presents a design concept delineating a few key technical issues and addressing all significant details in the system architecture design. With the aim of satisfying system requirements, the RCS will select rich Internet application (RIA) as a user interface, Java as a back-end service and Secure Socket Layer Virtual Private Network (SSL VPN) for securable Internet communication.

  18. Conventional Arms Export Control Reform: Cutting the Gordian Knot


    United States Munitions List ( USML ) of specific controlled items and the appropriate regulations, International Trade in Arms Regulations, (ITAR), to...establish and enforce the regulations and USML in coordination with the other departments with export control responsibilities or interests.11 The...because their control may be for foreign policy or economic reasons.14 The CCL is a separate and distinct list from the USML . Most in government and

  19. Design and Research of Intelligent Remote Control Fan Based on Single Chip Microcomputer and Bluetooth Technology

    Xue-Xia Zhang; You-Yun Dang; An-Ying Fu


    This paper is designed for intelligent remote control fans. The design of the microcontroller as the core, the sensor, Bluetooth and Andrews system applied to the design of intelligent remote control fan...

  20. Remote-controlled vision-guided mobile robot system

    Ande, Raymond; Samu, Tayib; Hall, Ernest L.


    Automated guided vehicles (AGVs) have many potential applications in manufacturing, medicine, space and defense. The purpose of this paper is to describe exploratory research on the design of the remote controlled emergency stop and vision systems for an autonomous mobile robot. The remote control provides human supervision and emergency stop capabilities for the autonomous vehicle. The vision guidance provides automatic operation. A mobile robot test-bed has been constructed using a golf cart base. The mobile robot (Bearcat) was built for the Association for Unmanned Vehicle Systems (AUVS) 1997 competition. The mobile robot has full speed control with guidance provided by a vision system and an obstacle avoidance system using ultrasonic sensors systems. Vision guidance is accomplished using two CCD cameras with zoom lenses. The vision data is processed by a high speed tracking device, communicating with the computer the X, Y coordinates of blobs along the lane markers. The system also has three emergency stop switches and a remote controlled emergency stop switch that can disable the traction motor and set the brake. Testing of these systems has been done in the lab as well as on an outside test track with positive results that show that at five mph the vehicle can follow a line and at the same time avoid obstacles.

  1. INTERACTION OF LASER RADIATION WITH MATTER. LASER PLASMA: Calculation of mass transfer in the remote cutting of metals by radiation of a high-power repetitively pulsed CO2 laser

    Gladush, G. G.; Rodionov, N. B.


    The mechanism of remote cutting of steel plates by radiation of a high-power repetitively pulsed CO2 laser is theoretically studied. The models of melt removal by the gravity force and the recoil pressure of material vapour are proposed and the sufficient conditions for the initiation of cutting are determined. A numerical model of a thermally thin plate was employed to describe the cutting for large focal spots.

  2. Issues in human/computer control of dexterous remote hands

    Salisbury, K.


    Much research on dexterous robot hands has been aimed at the design and control problems associated with their autonomous operation, while relatively little research has addressed the problem of direct human control. It is likely that these two modes can be combined in a complementary manner yielding more capability than either alone could provide. While many of the issues in mixed computer/human control of dexterous hands parallel those found in supervisory control of traditional remote manipulators, the unique geometry and capabilities of dexterous hands pose many new problems. Among these are the control of redundant degrees of freedom, grasp stabilization and specification of non-anthropomorphic behavior. An overview is given of progress made at the MIT AI Laboratory in control of the Salisbury 3 finger hand, including experiments in grasp planning and manipulation via controlled slip. It is also suggested how we might introduce human control into the process at a variety of functional levels.

  3. TeleLab – A Remote Monitoring and Control System

    Ashish Taneja; Aakash Kushwah; Akshat Gupta; Vats, Vipin B.


    Presented herein is a remote monitoring and control system which provides the user (client) with graphical output of the acquired experimental data. The experiment is based on MATLAB, Atmel AVR (namely the mega8). Instead of using different tools, the project focuses at using just one so as to make it simple for the user to understand and debug if necessary. A tool such as MatLab, being simple yet efficient, provides the greatest flexibility. At present the setup ...

  4. Web based remote monitoring and controlling system for vulnerable environments

    Thomas, Aparna; George, Minu


    The two major areas of concern in industrial establishments are monitoring and security. The remote monitoring and controlling can be established with the help of Web technology. Managers can monitor and control the equipment in the remote area through a web browser. The targeted area includes all type of susceptible environment like gas filling station, research and development laboratories. The environmental parameters like temperature, light intensity, gas etc. can be monitored. Security is a very important factor in an industrial setup. So motion detection feature is added to the system to ensure the security. The remote monitoring and controlling system makes use of the latest, less power consumptive and fast working microcontroller like S3C2440. This system is based on ARM9 and Linux operating system. The ARM9 will collect the sensor data and establish real time video monitoring along with motion detection feature. These captured video data as well as environmental data is transmitted over internet using embedded web server which is integrated within the ARM9 board.

  5. 47 CFR 22.575 - Use of mobile channel for remote control of station functions.


    ... 47 Telecommunication 2 2010-10-01 2010-10-01 false Use of mobile channel for remote control of... Mobile Operation § 22.575 Use of mobile channel for remote control of station functions. Carriers may remotely control station functions (e.g. shut down or reactivate base transmitters, turn aviation...

  6. 47 CFR 101.813 - Remote control operation of mobile television pickup stations.


    ... 47 Telecommunication 5 2010-10-01 2010-10-01 false Remote control operation of mobile television....813 Remote control operation of mobile television pickup stations. (a) Mobile television pickup stations (including nonbroadcast) may be operated by remote control from the fixed locations for periods...

  7. Remote robot manipulator coupled with remote-controlled guide vehicle for soil sampling in hazardous waste sites

    Kim, Kiho

    The important initial step for remediation of hazardous waste is contaminant analysis since the cleanup operation can not begin until the contaminants in hazardous waste sites have been clearly identified. Ames Laboratory, one of the U.S. Department of Energy sites, has developed a robotic sampling system for automation of real-time contaminant analysis in situ which will provide the advantage of lowering the cost per sample, eliminating personnel exposure to hazardous environments, and allowing quicker results. Successful accomplishment of real-time contaminant analysis will require a remote manipulator to perform the sampling tasks in remote and unstructured surroundings, and a remote-controlled guide vehicle to move a remote manipulator into the desired sampling location. This thesis focuses on the design and construction of a remote-controlled guide vehicle to move the robotic sampling system into the contaminated field to obtain soil samples at the desired locations, the development of an integrated dynamic model of a remote manipulator, the identification of dynamic parameters in the integrated dynamic model, and the design of a mobile robotic sampling system. A four-wheeled vehicle prototype has been constructed and its performance tested manually in the field to verify the design requirements. To remotely control the vehicle, mechanical requirements to activate the brake, throttle, transmission, and steering linkages were determined based on experimental results. A teleoperated control utilizing hundred feet long umbilical cords was first employed to remotely control the vehicle. Next, the vehicle was modified to remotely operate in the field by radio control without the aid of long umbilical cords, satisfying all the design specifications. To reduce modeling error in the robotic system, the integrated dynamic system comprised of a remote manipulator (located on a trailer pulled by the remote-controlled guide vehicle) and its drive system has been modeled

  8. Technical Report on Occupations in Numerically Controlled Metal-Cutting Machining.

    Manpower Administration (DOL), Washington, DC. U.S. Employment Service.

    At the present time, only 5 percent of the short-run metal-cutting machining in the United States is done by numerically controlled machined tools, but within the next decade it is expected to increase by 50 percent. Numerically controlled machines use taped data which is changed into instructions and directs the machine to do certain steps…

  9. Determination of the Critical Parameters for Remote Microscope Control

    Hahn, R. C.; Herbach, B. A.; Johnston, J. C.; Bethea, M.


    As part of a program to determine the capabilities of Telescience as applied to Microgravity Materials Science the need for a remotely controlled microscope was recognized. For this purpose we equipped a microscope with an X-Y-Z positioning device and motors on the zoom and focus controls. Computer control of these devices allowed remote operation. A standard TV camera was mounted to the computer controlled video board which could compress the image in resolution and grey scale. The operator control console was programmed to display three still video pictures as well as provide command access. A standard data transfer network was used to transmit the video data files and the command interaction was via a high speed phone modem. This system, with the microscope in the Microgravity Materials Science Laboratory (MMSL) at LeRC and the control at RPI, was used to determine the accuracy of setting, time required to achieve setting and the operator ease factor. It was found that the focus setting could be established well within the resolution limit of the TV system and that each motion took about 50 seconds and approximately 12 minutes was required to reach ?best? focus. These times could be reduced significantly with operator experience. The operators were provided with ancillary equipment which provided assistance in making the necessary decisions and they reported satisfaction with the control.

  10. Remote device access in the new accelerator controls middleware

    Baggiolini, V; Jensen, S; Kostro, K; Risso, A; Trofimov, N N; SL


    This paper presents the Remote Device Access (RDA) package developed at CERN in the framework of the joint PS/SL Controls Middleware project. The package design reflects the Accelerator Device Model in which devices, named entities in the control system, can be controlled via properties. RDA implements this model in a distributed environment with devices residing in servers that can run anywhere in the controls network. It provides a location-independent and reliable access to the devices from control programs. By invoking the device access methods, clients can read, write and subscribe to device property values. We describe the architecture and design of RDA its API, and CORBA-based implementations in Java and C++. First applications of RDA in the CERN accelerator control systems are described as well.

  11. Remote Control for the HT-7 Distributed Data Acquisition System

    岳冬利; 罗家融; 王枫; 朱琳


    HT-7 is the first superconducting tokamak device for fusion research in China. Manyexperiments have been done in the machine since 1994, and lots of satisfactory results have beenachieved in the fusion research field on HT-7 tokamak [1]. With the development of fusion re-search, remote control of experiment becomes more and more important to improve experimentalefficiency and expand research results. This paper will describe a RCS (Remote Control System),the combined model of Browser/Server and Client/Server, based on Internet of HT-7 distributeddata acquisition system (HT7DAS). By means of RCS, authorized users all over the world cancontrol and configure HT7DAS remotely. The RCS is designed to improve the flexibility, open-ing, reliability and efficiency of HT7DAS. In the paper, the whole process of design along withimplementation of the system and some key items are discussed in detail. The System has beensuccessfully operated during HT-7 experiment in 2002 campaign period.

  12. Remote Control and Data Acquisition: A Case Study

    DeGennaro, Alfred J.; Wilkinson, R. Allen


    This paper details software tools developed to remotely command experimental apparatus, and to acquire and visualize the associated data in soft real time. The work was undertaken because commercial products failed to meet the needs. This work has identified six key factors intrinsic to development of quality research laboratory software. Capabilities include access to all new instrument functions without any programming or dependence on others to write drivers or virtual instruments, simple full screen text-based experiment configuration and control user interface, months of continuous experiment run-times, order of 1% CPU load for condensed matter physics experiment described here, very little imposition of software tool choices on remote users, and total remote control from anywhere in the world over the Internet or from home on a 56 Kb modem as if the user is sitting in the laboratory. This work yielded a set of simple robust tools that are highly reliable, resource conserving, extensible, and versatile, with a uniform simple interface.

  13. Remote Control and Monitoring of VLBI Experiments by Smartphones

    Ruztort, C. H.; Hase, H.; Zapata, O.; Pedreros, F.


    For the remote control and monitoring of VLBI operations, we developed a software optimized for smartphones. This is a new tool based on a client-server architecture with a Web interface optimized for smartphone screens and cellphone networks. The server uses variables of the Field System and its station specific parameters stored in the shared memory. The client running on the smartphone by a Web interface analyzes and visualizes the current status of the radio telescope, receiver, schedule, and recorder. In addition, it allows commands to be sent remotely to the Field System computer and displays the log entries. The user has full access to the entire operation process, which is important in emergency cases. The software also integrates a webcam interface.

  14. PCDAS Version 2. 2: Remote network control and data acquisition

    Fishbaugher, M.J.


    This manual is intended for both technical and non-technical people who want to use the PCDAS remote network control and data acquisition software. If you are unfamiliar with remote data collection hardware systems designed at Pacific Northwest Laboratory (PNL), this introduction should answer your basic questions. Even if you have some experience with the PNL-designed Field Data Acquisition Systems (FDAS), it would be wise to review this material before attempting to set up a network. This manual was written based on the assumption that you have a rudimentary understanding of personal computer (PC) operations using Disk Operating System (DOS) version 2.0 or greater (IBM 1984). You should know how to create subdirectories and get around the subdirectory tree.

  15. Precision Control of Billet Limited WeightCutting Technology Cutting Technology%方坯定重切割精度控制的提高

    左康君; 李智勇; 王振涛; 朱童峰


    This article introduces the steel works are shipped on the billet limited weight cutting technology characteristics of control and detailed analysis of the technology in cutting,weighing,network management need to solve the problem.%炼钢厂方坯定重切割精度控制的技术特点,分析该技术在切割控制、称重、网络管理方面需要解决的问题。

  16. Technological study of laser cutting silicon steel controlled by rotating gas flow

    Lei, Hong; Yi, Zhang; chenglong, Mi


    Using traditional laser cutting technology, it is easy to produce molten slag in laser cutting silicon steel sheet. The main reason is the inevitable oxidizing reaction in the process caused by the use of oxygen as the aided gas. As a common solution, high pressure and high purity N 2 or an inert gas is therefore used instead of oxygen. Although the cut quality is improved, the cutting efficiency is reduced because of the lack of energy generated from an exothermic oxidation reaction. The technology used in this paper is to employ a newly developed cyclone slag separator. The slag separator is located under the workpiece to form rotating gas flow for controlling the direction of the flowing slag gas. Adopting the new technology reported here, oxygen is still used as the aided gas. The experiments prove that, by controlling the technical parameters reasonably tightly, glossy and dross-free cutting kerfs are obtained for reduced laser power. The gas flow acting under the workpiece is simulated using the finite element method (FEM). The operating law of the rotating gas flow is verified by ANSYS, which provides an academic basis for controlling the flowing direction of the slag gas.

  17. Remote control of a small unmanned ground vehicle (SUGV)

    Irimie, Nicolae; Zorila, Alexandru; Nan, Alexandru; Schiopu, Paul


    Developing robot technology has gained an increasing dynamics. Small unmanned ground vehicle - SUGV has gained a place in the robotics field. This paper describes the possibility of remote control of the SUGV using a fuzzy algorithm. This designed algorithm specifically for controlling of a semi-autonomous mobile robot for research, observation, and surveillance. The device can provide 360-degree panoramic images using an image system which includes a hyperboloid mirror and a CCD camera, designed for this specific purpose. Both components, fuzzy algorithm and image system were implemented, tested in the laboratory condition and outdoor on a mobile robot for research, observation, and surveillance.

  18. Influence of network latency in a remote control system using haptic media

    Asano, Toshio; Ishibashi, Yutaka; Kurokawa, Youichi


    This paper deals with a remote control system which controls a haptic interface device with another remote haptic interface device. Applications of the system include a remote drawing instruction system, a remote calligraphy system and a remote medical operation system. This paper examines the influence of network latency on the output quality of haptic media by subjective assessment in the remote drawing instruction system. As a result, we show that the instructor has smaller Mean Opinion Score (MOS) values than the learner, and the MOS value can be estimated with high accuracy from the summation of the network latency from an instructor's terminal to a learner's terminal and that in the opposite direction.

  19. Advantage of redundancy in the controllability of remote handling manipulator

    Muhammad, Ali, E-mail: [VTT, Technical Research Center of Finland, P.O. Box 1300, FI-33101 Tampere (Finland); Mattila, Jouni; Vilenius, Matti [Department of Intelligent Hydraulics and Automation, Tampere University of Technology, P.O. Box 589, FI-33101 Tampere (Finland); Siuko, Mikko [VTT, Technical Research Center of Finland, P.O. Box 1300, FI-33101 Tampere (Finland); Semeraro, Luigi [F4E, Fusion for Energy, Torres Diagonal Litoral B3, Josep Pla 2, 08019 Barcelona (Spain)


    To carry out a variety of remote handling operations inside the ITER divertor a Water Hydraulic MANipulator (WHMAN) and its control system have been designed and developed at Tampere University of Technology. The manipulator is installed on top of Cassette Multifunctional Mover (CMM) to assist during the cassette removal and installation operations. While CMM is designed to carry heavy components such as cassettes through the service ducts relying on positioning accuracy and repeatability, WHMAN is designed to execute a mix of remote handling operations using position trajectories and master-slave telemanipulation. WHMAN is composed of eight joints: six rotational and two translational. Since a manipulator requires only six joints to acquire the desired position and orientation in operational-space, the two additional joints of WHMAN provide the redundant degrees of mobility. This paper presents how this redundancy of WHMAN can be an advantage to optimize the execution of remote handling tasks. The paper also discusses an effective way to practically exploit the redundancy. The results show that the additional degrees of freedom can be utilized to improve the dynamic behavior of the manipulator.

  20. Remote Pressure Control - Considering Pneumatic Tubes in Controller Design

    Rager, David; Neumann, Rüdiger; Murrenhoff, Hubertus


    In pneumatic pressure control applications the influence of tubes that connect the valve with the control volume ist mainly neglected. This can lead to stability and robustness issues and limit either control performance or tube length. Modeling and considering tube behavior in controller design procedure allows longer tubes while maintaining the required performance and robustness properties without need for manual tuning. The author\\'s previously published Simplified Fluid Transmission Line...

  1. Internet remote control interface for a multipurpose robotic arm

    Matthew W. Dunnigan


    Full Text Available This paper presents an Internet remote control interface for a MITSUBISHI PA10-6CE manipulator established for the purpose of the ROBOT museum exhibition during spring and summer 2004. The robotic manipulator is a part of the Intelligent Robotic Systems Laboratory at Heriot ? Watt University, which has been established to work on dynamic and kinematic aspects of manipulator control in the presence of environmental disturbances. The laboratory has been enriched by a simple vision system consisting of three web-cameras to broadcast the live images of the robots over the Internet. The Interface comprises of the TCP/IP server providing command parsing and execution using the open controller architecture of the manipulator and a client Java applet web-site providing a simple robot control interface.

  2. Research and development of HVDC remote control interface

    Zhang, Zi-biao; Liu, Guo-ling; Geng, Zhan-xiao


    This paper introduces The development status quo of HVDC (high voltage direct current) power transmission project, analyzes the overall structure of RCI (remote control interface), puts forward the function design and the software realization. the communication message was accorded with the message defined in DL/T 634.5101-2002 / DL/T 634.5104-2002, the RCI could meet the requirement of the HVDC power transmission project ,which was approved, and there is guiding significance on the research of RCI of HVDC power transmission project..

  3. Design and Construction of a Remote Control Car Jack

    C.S Agu and J.E Igwe


    Full Text Available A remote control car jack which will be affordable, simple to maintain and easy to operate was designed and fabricated with locally available materials. Results of the performance test of the car jack conducted with Toyota Camry of weight1359kg, BMW (5series of 1685kg, Mercedes jeep of weight 2355kg and Toyota prado of weight 2555kg showed credible performance by lifting and sustaining the vehicles to heights of 14cm under 1.7mins; 13cm under 2mins; 11cm under 2.2mins and 10cm under 2.4mins respectively.


    Navaneethakrishnan .V.M*; Navaneeda Krishnan .K; Michel .P; Velmurugan R


    In this paper, as the world gets more and more technologically advanced, we find new technology coming in deeper and deeper into our personal lives even at home. Home automation is becoming more popular around the world and is becoming a common practice. This Paper presents the overall design of Home Automation System (HAS) with low cost and wireless remote control. This system is designed to assist and provide support in order to fulfill the needs of elderly and disabled in home. Also, the s...

  5. Fermilab Muon Campus g-2 Cryogenic Distribution Remote Control System

    Pei, L; Klebaner, A; Soyars, W; Bossert, R


    The Muon Campus (MC) is able to measure Muon g-2 with high precision and comparing its value to the theoretical prediction. The MC has four 300 KW screw compressors and four liquid helium refrigerators. The centerpiece of the Muon g-2 experiment at Fermilab is a large, 50-foot-diameter superconducting muon storage ring. This one-of-a-kind ring, made of steel, aluminum and superconducting wire, was built for the previous g-2 experiment at Brookhaven. Due to each subsystem has to be far away from each other and be placed in the distant location, therefore, Siemens Process Control System PCS7-400, Automation Direct DL205 & DL05 PLC, Synoptic and Fermilab ACNET HMI are the ideal choices as the MC g-2 cryogenic distribution real-time and on-Line remote control system. This paper presents a method which has been successfully used by many Fermilab distribution cryogenic real-time and On-Line remote control systems.

  6. Magnetic hydrogel nanocomposites as remote controlled microfluidic valves.

    Satarkar, Nitin S; Zhang, Wenli; Eitel, Richard E; Hilt, J Zach


    In recent years, hydrogels have attracted attention as active components in microfluidic devices. Here, we present a demonstration of remote controlled flow regulation in a microfluidic device using a hydrogel nanocomposite valve. To create the nanocomposite hydrogel, magnetic nanoparticles were dispersed in temperature-responsive N-isopropylacrylamide (NIPAAm) hydrogels. The swelling and collapse of the resultant nanocomposite can be remotely controlled by application of an alternating magnetic field (AMF). A ceramic microfluidic device with Y-junction channels was fabricated using low temperature co-fired ceramic (LTCC) technology. The nanocomposite was incorporated as a valve in one of the channels of the device. An AMF of frequency 293 kHz was then applied to the device and ON-OFF control on flow was achieved. A pressure transducer was placed at the inlet of the channel and pressure measurements were done for multiple AMF ON-OFF cycles to evaluate the reproducibility of the valve. Furthermore, the effect of the hydrogel geometry on the response time was characterized by hydrogels with different dimensions. Magnetic hydrogel nanocomposite films of different thicknesses (0.5, 1, 1.5 mm) were subjected to AMF and the kinetics of collapse and recovery were studied.

  7. Fermilab Muon Campus g-2 Cryogenic Distribution Remote Control System

    Pei, L.; Theilacker, J.; Klebaner, A.; Soyars, W.; Bossert, R.


    The Muon Campus (MC) is able to measure Muon g-2 with high precision and comparing its value to the theoretical prediction. The MC has four 300 KW screw compressors and four liquid helium refrigerators. The centerpiece of the Muon g-2 experiment at Fermilab is a large, 50-foot-diameter superconducting muon storage ring. This one-of-a-kind ring, made of steel, aluminum and superconducting wire, was built for the previous g-2 experiment at Brookhaven. Due to each subsystem has to be far away from each other and be placed in the distant location, therefore, Siemens Process Control System PCS7-400, Automation Direct DL205 & DL05 PLC, Synoptic and Fermilab ACNET HMI are the ideal choices as the MC g-2 cryogenic distribution real-time and on-Line remote control system. This paper presents a method which has been successfully used by many Fermilab distribution cryogenic real-time and On-Line remote control systems.

  8. A TWO-DOF Controlled Lens Drive Actuator for Off-Axis Laser Beam Cutting

    Morimoto, Yoshihiro; Shinshi, Tadahiko; Nakai, Takahiro

    This paper describes a two-degree-of-freedom (two-DOF) controlled electromagnetic actuator guided by an elastic hinge mechanism to realize off-axis laser beam cutting. In the laser beam cutting process, a focused laser beam melts and vaporizes part of the workpiece, and the molten material is blown away by an assist gas jet. The cutting speed and quality are related to the flow of the assist gas jet. In order to improve the removal capability of the molten material and to reduce gas consumption in off-axis laser beam cutting, the lens is driven radially by the proposed two-DOF actuator to generate relative motion between the assist gas nozzle and the laser. Experimental results show the prototype actuator possesses a positioning stroke of ±500µm within 3µm of tracking error and bandwidths more than 150Hz in the two-DOF directions. In the acceleration test supposed at a maximum acceleration of 2G, the prototype actuator maintains the relative displacement between the lens holder and the laser head within 10µm. Off-axis laser beam cutting by using the prototype actuator achieves high speed and less dross processing.

  9. Study of design and control of remote manipulators. Part 4: Experiments in video camera positioning with regard to remote manipulation

    Mackro, J.


    The results are presented of a study involving closed circuit television as the means of providing the necessary task-to-operator feedback for efficient performance of the remote manipulation system. Experiments were performed to determine the remote video configuration that will result in the best overall system. Two categories of tests were conducted which include: those which involved remote control position (rate) of just the video system, and those in which closed circuit TV was used along with manipulation of the objects themselves.

  10. Remote control of SMM behaviour via DTE ligands.

    Cosquer, Goulven; Breedlove, Brian K; Yamashita, Masahiro


    Chemists and physicists are continuously working to understand the mechanisms controlling molecular magnetism, especially single-molecule magnetism, to improve the magnetic properties, such as the blocking temperature. With the current research focused on preparing molecular devices, methods to control the components of the devices are necessary. Extensive research has shown that stimuli, such as light, electric current, etc., can be used to change the properties of the molecules making up the devices. Bis(carboxylato)dithienylethene (DTE) derivatives can be photo-isomerized between open and closed forms, i.e., unconjugated and π-conjugated forms, and because of the carboxylate groups, it can be used to link 3d and/or 4f metal ions. Herein the use of DTE ligands to remotely control the magnetic properties of single-molecule magnets is discussed.

  11. Optimal feedback control of a bioreactor with a remote sensor

    Niranjan, S. C.; San, K. Y.


    Sensors used to monitor bioreactor conditions directly often perform poorly in the face of adverse nonphysiological conditions. One way to circumvent this is to use a remote sensor block. However, such a configuration usually causes a significant time lag between measurements and the actual state values. Here, the problem of implementing feedback control strategies for such systems, described by nonlinear equations, is addressed. The problem is posed as an optimal control problem with a linear quadratic performance index. The linear control law so obtained is used to implement feedback. A global linearization technique as well as an expansion using Taylor series is used to linearize the nonlinear system, and the feedback is subsequently implemented.

  12. A remotely operated drug delivery system with dose control

    Yi, Ying


    “On demand” implantable drug delivery systems can provide optimized treatments, due to their ability to provide targeted, flexible and precise dose release. However, two important issues that need to be carefully considered in a mature device include an effective actuation stimulus and a controllable dose release mechanism. This work focuses on remotely powering an implantable drug delivery system and providing a high degree of control over the released dose. This is accomplished by integration of a resonance-based wireless power transfer system, a constant voltage control circuit and an electrolytic pump. Upon the activation of the wireless power transfer system, the electrolytic actuator is remotely powered by a constant voltage regardless of movements of the device within an effective range of translation and rotation. This in turn contributes to a predictable dose release rate and greater flexibility in the positioning of external powering source. We have conducted proof-of-concept drug delivery studies using the liquid drug in reservoir approach and the solid drug in reservoir approach, respectively. Our experimental results demonstrate that the range of flow rate is mainly determined by the voltage controlled with a Zener diode and the resistance of the implantable device. The latter can be adjusted by connecting different resistors, providing control over the flow rate to meet different clinical needs. The flow rate can be maintained at a constant level within the effective movement range. When using a solid drug substitute with a low solubility, solvent blue 38, the dose release can be kept at 2.36μg/cycle within the effective movement range by using an input voltage of 10Vpp and a load of 1.5 kΩ, which indicates the feasibility and controllability of our system without any complicated closed-loop sensor.

  13. Monitoring and remote control of a hybrid photovoltaic microgrid

    Henrique Tiggemann


    Full Text Available The search of new alternatives for energy supply in island communities has always been a challenge in scientific and social context. In order to attend these communities, in January 2013 a photovoltaic hybrid microgrid project had its beginning at Universidade do Vale do Rio dos Sinos (UNISINOS. This paper presents the characterization and the development of such microgrid, monitored remotely via internet, which allows visualizing the electrical measurements, energy production and performing remote control actions. This work also aims increasing the interaction between students of universities to perform laboratory practices. The system consists of two photovoltaic modules technologies, mono and multicrystalline, totaling 570 Wp, connected to an energy storage bank of 200 Ah in 24 V and a pure sinusoidal inverter of 1 kW to supply AC voltage loads of 220 V. All acquisition components of data, conversion and management system are located in a control cabinet. Currently, the microgrid uses the utility grid as an auxiliary generator, simulating an alternative source of energy, which can be further replaced by fuel cell, biodiesel generator, etc.

  14. A Self-Calibrating Remote Control Chemical Monitoring System

    Jessica Croft


    The Susie Mine, part of the Upper Tenmile Mining Area, is located in Rimini, MT about 15 miles southwest of Helena, MT. The Upper Tenmile Creek Mining Area is an EPA Superfund site with 70 abandoned hard rock mines and several residential yards prioritized for clean up. Water from the Susie mine flows into Tenmile Creek from which the city of Helena draws part of its water supply. MSE Technology Applications in Butte, Montana was contracted by the EPA to build a treatment system for the Susie mine effluent and demonstrate a system capable of treating mine waste water in remote locations. The Idaho National Lab was contracted to design, build and demonstrate a low maintenance self-calibrating monitoring system that would monitor multiple sample points, allow remote two-way communications with the control software and allow access to the collected data through a web site. The Automated Chemical Analysis Monitoring (ACAM) system was installed in December 2006. This thesis documents the overall design of the hardware, control software and website, the data collected while MSE-TA’s system was operational, the data collected after MSE-TA’s system was shut down and suggested improvements to the existing system.

  15. Diverse Planning for UAV Control and Remote Sensing.

    Tožička, Jan; Komenda, Antonín


    Unmanned aerial vehicles (UAVs) are suited to various remote sensing missions, such as measuring air quality. The conventional method of UAV control is by human operators. Such an approach is limited by the ability of cooperation among the operators controlling larger fleets of UAVs in a shared area. The remedy for this is to increase autonomy of the UAVs in planning their trajectories by considering other UAVs and their plans. To provide such improvement in autonomy, we need better algorithms for generating alternative trajectory variants that the UAV coordination algorithms can utilize. In this article, we define a novel family of multi-UAV sensing problems, solving task allocation of huge number of tasks (tens of thousands) to a group of configurable UAVs with non-zero weight of equipped sensors (comprising the air quality measurement as well) together with two base-line solvers. To solve the problem efficiently, we use an algorithm for diverse trajectory generation and integrate it with a solver for the multi-UAV coordination problem. Finally, we experimentally evaluate the multi-UAV sensing problem solver. The evaluation is done on synthetic and real-world-inspired benchmarks in a multi-UAV simulator. Results show that diverse planning is a valuable method for remote sensing applications containing multiple UAVs.

  16. Diverse Planning for UAV Control and Remote Sensing

    Jan Tožička


    Full Text Available Unmanned aerial vehicles (UAVs are suited to various remote sensing missions, such as measuring air quality. The conventional method of UAV control is by human operators. Such an approach is limited by the ability of cooperation among the operators controlling larger fleets of UAVs in a shared area. The remedy for this is to increase autonomy of the UAVs in planning their trajectories by considering other UAVs and their plans. To provide such improvement in autonomy, we need better algorithms for generating alternative trajectory variants that the UAV coordination algorithms can utilize. In this article, we define a novel family of multi-UAV sensing problems, solving task allocation of huge number of tasks (tens of thousands to a group of configurable UAVs with non-zero weight of equipped sensors (comprising the air quality measurement as well together with two base-line solvers. To solve the problem efficiently, we use an algorithm for diverse trajectory generation and integrate it with a solver for the multi-UAV coordination problem. Finally, we experimentally evaluate the multi-UAV sensing problem solver. The evaluation is done on synthetic and real-world-inspired benchmarks in a multi-UAV simulator. Results show that diverse planning is a valuable method for remote sensing applications containing multiple UAVs.

  17. Remote Sensing and Remote Control Activities in Europe and America: Part 2--Remote Sensing Ground Stations in Europe,


    Development tasks and products of remote sensing ground stations in Europe are represented by the In-Sec Corporation and the Schlumberger Industries Corporation. The article presents the main products of these two corporations.

  18. A Three-Year Feedback Study of a Remote Laboratory Used in Control Engineering Studies

    Chevalier, Amélie; Copot, Cosmin; Ionescu, Clara; De Keyser, Robin


    This paper discusses the results of a feedback study for a remote laboratory used in the education of control engineering students. The goal is to show the effectiveness of the remote laboratory on examination results. To provide an overview, the two applications of the remote laboratory are addressed: 1) the Stewart platform, and 2) the quadruple…


    V. I. Freyman


    Full Text Available The paper deals with the hardware and software implementation of automated remote management system of laboratory equipment for studying fundamentals of electronics and circuit technology. This system gives the possibility to create the virtual model of a real stand. The original software has enabled to compare information from the memory of microcontroller keeping in laboratory stands with etalon model, and reveal discrepancies of set connections and template data. Graphical interface allows for operation control of students and correction of studying process. Automation of configuring and the following checking procedures has accelerated the work and decreased error frequency, made it possible to improve the quality of learning, increase efficiency of laboratory researches and control accuracy, intensify the check procedure and use self-checking in case of independent execution of tasks.

  20. Controlled bidirectional remote preparation of three-qubit state

    Chen, Xiu-Bo; Sun, Yi-Ru; Xu, Gang; Jia, Heng-Yue; Qu, Zhiguo; Yang, Yi-Xian


    We present a novel scheme for controlled bidirectional remote state preparation by using thirteen-qubit entangled state as the quantum channel, where both Alice and Bob transfer an arbitrary three-qubit state to each other simultaneously via the control of Charlie. Firstly, in the ideal environment, we consider our scheme in two cases that the coefficients of prepared state are real and complex, respectively. The corresponding measurement bases are devised. Secondly, we discuss our scheme in four types of noisy environment (bit-flip, phase-flip, amplitude-damping and phase-damping noisy environments) and calculate the corresponding fidelities of the output state. Finally, the efficiency of our scheme is calculated and some discussions are given.

  1. Automation and remote control at Mining 85 in Birmingham

    Czauderna, N.


    Looking round the exhibition showed that more and more manufacturers and users take advantage of the new measuring, control and regulatory techniques with economic profit. Process computers and micro-computers make a general use of these techniques possible. The backbone of all automation systems is data transmission between widely distributed stations on individual machines. Here, too, it was clear that in mining multiple data transmission on the basis of highly integrated components and own microprocessors is occupying an ever more prominent place in communication techniques. BUS systems are more and more in evidence and already installed in some plants. For the purpose of this report and ease of reference to the large field automation and remote control at Minig 85 the products have been grouped under sensor, transmission and automation technologies. (orig./MOS).

  2. Remote Control Laboratory Using EJS Applets and TwinCAT Programmable Logic Controllers

    Besada-Portas, E.; Lopez-Orozco, J. A.; de la Torre, L.; de la Cruz, J. M.


    This paper presents a new methodology to develop remote laboratories for systems engineering and automation control courses, based on the combined use of TwinCAT, a laboratory Java server application, and Easy Java Simulations (EJS). The TwinCAT system is used to close the control loop for the selected plants by means of programmable logic…

  3. Remote Learning for the Manipulation and Control of Robotic Cells

    Goldstain, Ofir; Ben-Gal, Irad; Bukchin, Yossi


    This work proposes an approach to remote learning of robotic cells based on internet and simulation tools. The proposed approach, which integrates remote-learning and tele-operation into a generic scheme, is designed to enable students and developers to set-up and manipulate a robotic cell remotely. Its implementation is based on a dedicated…

  4. Cooperative Remote Monitoring, Arms control and nonproliferation technologies: Fourth quarter 1995

    Alonzo, G M [ed.


    The DOE`s Cooperative Remote Monitoring programs integrate elements from research and development and implementation to achieve DOE`s objectives in arms control and nonproliferation. The contents of this issue are: cooperative remote monitoring--trends in arms control and nonproliferation; Modular Integrated Monitoring System (MIMS); Authenticated Tracking and Monitoring Systems (ATMS); Tracking and Nuclear Materials by Wide-Area Nuclear Detection (WAND); Cooperative Monitoring Center; the International Remote Monitoring Project; international US and IAEA remote monitoring field trials; Project Dustcloud: monitoring the test stands in Iraq; bilateral remote monitoring: Kurchatov-Argonne-West Demonstration; INSENS Sensor System Project.

  5. Remote Imaging Applied to Schistosomiasis Control: The Anning River Project

    Seto, Edmund Y. W.; Maszle, Don R.; Spear, Robert C.; Gong, Peng


    The use of satellite imaging to remotely detect areas of high risk for transmission of infectious disease is an appealing prospect for large-scale monitoring of these diseases. The detection of large-scale environmental determinants of disease risk, often called landscape epidemiology, has been motivated by several authors (Pavlovsky 1966; Meade et al. 1988). The basic notion is that large-scale factors such as population density, air temperature, hydrological conditions, soil type, and vegetation can determine in a coarse fashion the local conditions contributing to disease vector abundance and human contact with disease agents. These large-scale factors can often be remotely detected by sensors or cameras mounted on satellite or aircraft platforms and can thus be used in a predictive model to mark high risk areas of transmission and to target control or monitoring efforts. A review of satellite technologies for this purpose was recently presented by Washino and Wood (1994) and Hay (1997) and Hay et al. (1997).

  6. Application of telerobotic control to remote processing of nuclear material

    Merrill, R.D.; Grasz, E.L.; Herget, C.J.; Gavel, D.T.; Addis, R.B.; DeMinico, G.A.


    In processing radioactive material there are certain steps which have customarily required operators working at glove box enclosures. This can subject the operators to low level radiation dosages and the risk of accidental contamination, as well as generate significant radioactive waste to accommodate the human interaction. An automated system is being developed to replace the operator at the glove box and thus remove the human from these risks, and minimize waste. Although most of the processing can be automated with very little human operator interaction, there are some tasks where intelligent intervention is necessary to adapt to unexpected circumstances and events. These activities will require that the operator be able to interact with the process using a remote manipulator in a manner as natural as if the operator were actually in the work cell. This robot-based remote manipulation system, or telerobot, must provide the operator with an effective means of controlling the robot arm, gripper and tools. This paper describes the effort in progress in Lawrence Livermore National Laboratory to achieve this capability. 8 refs.

  7. Experimenting from a distance—remotely controlled laboratory (RCL)

    Gröber, Sebastian; Vetter, Martin; Eckert, Bodo; Jodl, Hans-Jörg


    The use of computers and multimedia, as well as the World Wide Web and new communication technologies, allows new forms of teaching and learning such as distance learning, blended learning, use of virtual libraries and many more. The herewith discussed remotely controlled laboratory (RCL) project shall offer an additional contribution. The basic idea is for a user to connect via the Internet with a computer from place A to a real experiment carried out in place B. An overview of our technical and didactical developments as well as an outlook on future plans is presented. Currently, about ten RCLs have been implemented. The essential characteristics of an RCL are the intuitive use and interactivity (operating the technical parameters), the possibility of different points of view of the ongoing experiment thanks to web cams and the quickest possible transfer of the data measured by the user. A reasonable use of sensibly chosen real experiments as remote labs allows a new form of homework and exercises, as well as project work and the execution of experiments, which usually would be a teacher's prerogative only.

  8. Substrates and controlled-release fertilizations on the quality of eucalyptus cuttings

    Richardson B. G. da Silva


    Full Text Available To produce cuttings with quality, the most appropriate nutritional management strategies should be sought to reduce wastage of fertilizer, while accounting for the characteristics of each substrate. This study evaluated the effect of substrates and doses of controlled-release fertilizer on the quality of Eucalyptus grandis Hill ex Maiden x Eucalyptus urophylla S. T. Blake cuttings. The substrates consisted of several mixtures: vermiculite+carbonized rice chaff+coconut fibre (1:1:1; vermiculite+coconut fibre (1:1; and vermiculite+carbonized rice chaff (1:1. These mixtures were added to 2, 4, 6 and 8 kg of controlled-release fertilizer per cubic meter of substrate. The substrates that do not support root development and have lower water retention, independently of the dose of controlled-release fertilizer, reduce the quality of the root system. For substrates with proper values of water retention, such as vermiculite+coconut fibre (1:1 and vermiculite+carbonised rice chaff+coconut fibre (1:1:1, the utilization of dose 2 kg of controlled-release fertilizer to each cubic meter is enough to promote cuttings with greater quality of the root systems and proper heights and stem diameters.

  9. Transient analysis of energy Transfer Control (ECT) and compressor bleed concepts of remote lift fan control

    Sellers, J. F.


    The transient performance of two concepts for control of vertical takeoff aircraft remote lift fans is analyzed and discussed. Both concepts employ flow transfer between pairs of lift fans located in separate parts of the aircraft in order to obtain attitude control moments for hover and low-speed flight. The results presented are from a digital computer, dynamic analysis of the YJ97/LF460 remote drive turbofan. The transient responses of the two systems are presented for step demands in lift and moment.

  10. Magnetic suspension motorized spindle-cutting system dynamics analysis and vibration control review

    Xiaoli QIAO


    Full Text Available The performance of high-speed spindle directly determines the development of high-end machine tools. The cutting system's dynamic characteristics and vibration control effect are inseparable with the performance of the spindle,which influence each other, synergistic effect together the cutting efficiency, the surface quality of the workpiece and tool life in machining process. So, the review status on magnetic suspension motorized spindle, magnetic suspension bearing-flexible rotor system dynamics modeling theory and status of active control technology of flexible magnetic suspension motorized spindle rotor vibration are studied, and the problems which present in the magnetic suspension flexible motorized spindle rotor systems are refined, and the development trend of magnetic levitation motorized spindle and the application prospect is forecasted.

  11. Panoramic Stereoscopic Video System for Remote-Controlled Robotic Space Operations Project

    National Aeronautics and Space Administration — This Phase I project will demonstrate the feasibility of providing panoramic stereoscopic images for remote-controlled robotic space operations using three...

  12. Method and systems for power control of internal combustion engines using individual cycle cut-off

    Fedorenko, Y.; Korzhov, M.; Filippov, A.; Atamanenko, N.


    A new method of controlling power has been developed for improving efficiency and emissions performance of internal combustion engines at partial load. The method involves cutting-off some of the work cycles, as the load decreases, to obtain required power. Theoretical and experimental material is presented to illustrate the underlying principle, the implementation means and the results for the 4- and 8-cylinder piston engine and a twin rotor Wankel engine applications.

  13. Multivariable control of the Space Shuttle Remote Manipulator System

    Adams, Neil J.; Appleby, Brent D.; Prakash, OM, II


    Linear controllers are designed to regulate the end effector of the Space Shuttle Remote Manipulator System (SRMS) operating in position hold mode. Design techniques used include H2 and H-infinity optimization. The nonlinear SRMS is linearized by modeling the effects of the significant nonlinearities as uncertain parameters. Each regulator design is evaluated for robust stability using both the small gain theorem with an H-infinity norm and the less conservative mu-analysis test. Regulator designs offer significant improvement over the current system for the nominal plant. Unfortunately, the SRMS model suffers from lightly damped poles with real parametric uncertainty. Under such conditions, the mu-analysis test, which allows for complex perturbations, cannot guarantee robust stability.

  14. Flexible Laser Metal Cutting

    Villumsen, Sigurd; Jørgensen, Steffen Nordahl; Kristiansen, Morten


    This paper describes a new flexible and fast approach to laser cutting called ROBOCUT. Combined with CAD/CAM technology, laser cutting of metal provides the flexibility to perform one-of-a-kind cutting and hereby realises mass production of customised products. Today’s laser cutting techniques...... possess, despite their wide use in industry, limitations regarding speed and geometry. Research trends point towards remote laser cutting techniques which can improve speed and geometrical freedom and hereby the competitiveness of laser cutting compared to fixed-tool-based cutting technology...... such as punching. This paper presents the concepts and preliminary test results of the ROBOCUT laser cutting technology, a technology which potentially can revolutionise laser cutting....

  15. Telerobotic-assisted bone-drilling system using bilateral control with feed operation scaling and cutting force scaling.

    Kasahara, Yusuke; Kawana, Hiromasa; Usuda, Shin; Ohnishi, Kouhei


    Drilling is used in the medical field, especially in oral surgery and orthopaedics. In recent years, oral surgery involving dental implants has become more common. However, the risky drilling process causes serious accidents. To prevent these accidents, supporting systems such as robotic drilling systems are required. A telerobotic-assisted drilling system is proposed. An acceleration-based four-channel bilateral control system is implemented in linear actuators in a master-slave system for drill feeding. A reaction force observer is used instead of a force sensor for measuring cutting force. Cutting force transmits from a cutting material to a surgeon, who may feel a static cutting resistance force and vigorous cutting vibrations, via the master-slave system. Moreover, position scaling and force scaling are achieved. Scaling functions are used to achieve precise drilling and hazard detection via force sensation. Cutting accuracy and reproducibility of the cutting force were evaluated by angular velocity/position error and frequency analysis of the cutting force, respectively, and errors were > 2.0 rpm and > 0.2 mm, respectively. Spectrum peaks of the cutting vibration were at the theoretical vibration frequencies of 30, 60 and 90 Hz. The proposed telerobotic-assisted drilling system achieved precise manipulation of the drill feed and vivid feedback from the cutting force. Copyright © 2012 John Wiley & Sons, Ltd.

  16. Research on the low speed stability control technology of fly-cutting machine for KDP crystals

    Chen, Dongsheng; Ji, Fang; Chen, Hua


    In the paper, The problem about stability in low speed of the air bearing stage driven by a linear motor was investigated to satisfy the ultra-precision fly-cutting of KDP crystals. First of all, the modal of the servo system with the permanent magnet synchronous linear motor was analyzed. In the system of the low speed linear motor driver, the main interferences came from cutting force f Load , the friction of chain and cable f n , the ripple thrust f ripp , and motor friction f fric . Secondly, the factors about low speed stability were analyzed: the key to improve the system's stability is to control the interference forces; Another important issue is to develop an advanced control strategy. Thirdly, some optimization experiments about low speed stability were developed as follows: the influence of feedback element, the influence of Power converter, speed optimization of damping feed-forward control, speed optimization of Spindle vibration, speed optimization based on disturbance observer. Finally the experimental results: the lowest speed of the stage can reach 0.2 mm/min; the error of the speed is less than 0.06mm/min when running between 1mm/min and 10 mm/min. The cutting experiment of KDP with the size of 330mm × 330mm × 10mm, was proceeded on the Fly-cutting machine by the feeding velocity of 1mm/min. The results about the surface roughness show that the value of Rq is 3.3nm and the value of Ra is 2.6nm.

  17. Remote controlled gate controller using a GSM network and Arduino platform

    Pospisilik Martin


    Full Text Available Most remote controllers for entrance gates operate on free frequencies 433 or 868 MHz. However, this technology limits the user comfort, as it is usually not common that bi-directional communication is established. A higher comfort of controlling the entrance gates can be achieved by employing the GSM network for transmission of commands and messages between the gate controller and the user. In this case, only a conventional GSM cellular phone is needed to control the gate. A description of such a controller based on the GSM module and Arduino controller is provided in this paper.

  18. Remote control of magnetostriction-based nanocontacts at room temperature.

    Jammalamadaka, S Narayana; Kuntz, Sebastian; Berg, Oliver; Kittler, Wolfram; Kannan, U Mohanan; Chelvane, J Arout; Sürgers, Christoph


    The remote control of the electrical conductance through nanosized junctions at room temperature will play an important role in future nano-electromechanical systems and electronic devices. This can be achieved by exploiting the magnetostriction effects of ferromagnetic materials. Here we report on the electrical conductance of magnetic nanocontacts obtained from wires of the giant magnetostrictive compound Tb0.3Dy0.7Fe1.95 as an active element in a mechanically controlled break-junction device. The nanocontacts are reproducibly switched at room temperature between "open" (zero conductance) and "closed" (nonzero conductance) states by variation of a magnetic field applied perpendicularly to the long wire axis. Conductance measurements in a magnetic field oriented parallel to the long wire axis exhibit a different behaviour where the conductance switches between both states only in a limited field range close to the coercive field. Investigating the conductance in the regime of electron tunneling by mechanical or magnetostrictive control of the electrode separation enables an estimation of the magnetostriction. The present results pave the way to utilize the material in devices based on nano-electromechanical systems operating at room temperature.

  19. Guidelines To Validate Control of Cross-Contamination during Washing of Fresh-Cut Leafy Vegetables.

    Gombas, D; Luo, Y; Brennan, J; Shergill, G; Petran, R; Walsh, R; Hau, H; Khurana, K; Zomorodi, B; Rosen, J; Varley, R; Deng, K


    The U.S. Food and Drug Administration requires food processors to implement and validate processes that will result in significantly minimizing or preventing the occurrence of hazards that are reasonably foreseeable in food production. During production of fresh-cut leafy vegetables, microbial contamination that may be present on the product can spread throughout the production batch when the product is washed, thus increasing the risk of illnesses. The use of antimicrobials in the wash water is a critical step in preventing such water-mediated cross-contamination; however, many factors can affect antimicrobial efficacy in the production of fresh-cut leafy vegetables, and the procedures for validating this key preventive control have not been articulated. Producers may consider three options for validating antimicrobial washing as a preventive control for cross-contamination. Option 1 involves the use of a surrogate for the microbial hazard and the demonstration that cross-contamination is prevented by the antimicrobial wash. Option 2 involves the use of antimicrobial sensors and the demonstration that a critical antimicrobial level is maintained during worst-case operating conditions. Option 3 validates the placement of the sensors in the processing equipment with the demonstration that a critical antimicrobial level is maintained at all locations, regardless of operating conditions. These validation options developed for fresh-cut leafy vegetables may serve as examples for validating processes that prevent cross-contamination during washing of other fresh produce commodities.

  20. Vibration suppression in cutting tools using collocated piezoelectric sensors/actuators with an adaptive control algorithm

    Radecki, Peter P [Los Alamos National Laboratory; Farinholt, Kevin M [Los Alamos National Laboratory; Park, Gyuhae [Los Alamos National Laboratory; Bement, Matthew T [Los Alamos National Laboratory


    The machining process is very important in many engineering applications. In high precision machining, surface finish is strongly correlated with vibrations and the dynamic interactions between the part and the cutting tool. Parameters affecting these vibrations and dynamic interactions, such as spindle speed, cut depth, feed rate, and the part's material properties can vary in real-time, resulting in unexpected or undesirable effects on the surface finish of the machining product. The focus of this research is the development of an improved machining process through the use of active vibration damping. The tool holder employs a high bandwidth piezoelectric actuator with an adaptive positive position feedback control algorithm for vibration and chatter suppression. In addition, instead of using external sensors, the proposed approach investigates the use of a collocated piezoelectric sensor for measuring the dynamic responses from machining processes. The performance of this method is evaluated by comparing the surface finishes obtained with active vibration control versus baseline uncontrolled cuts. Considerable improvement in surface finish (up to 50%) was observed for applications in modern day machining.

  1. Remotely Triggered Scaffolds for Controlled Release of Pharmaceuticals

    Clare Hoskins


    Full Text Available Fe3O4-Au hybrid nanoparticles (HNPs have shown increasing potential for biomedical applications such as image guided stimuli responsive drug delivery. Incorporation of the unique properties of HNPs into thermally responsive scaffolds holds great potential for future biomedical applications. Here we successfully fabricated smart scaffolds based on thermo-responsive poly(N-isopropylacrylamide (pNiPAM. Nanoparticles providing localized trigger of heating when irradiated with a short laser burst were found to give rise to remote control of bulk polymer shrinkage. Gold-coated iron oxide nanoparticles were synthesized using wet chemical precipitation methods followed by electrochemical coating. After subsequent functionalization of particles with allyl methyl sulfide, mercaptodecane, cysteamine and poly(ethylene glycol thiol to enhance stability, detailed biological safety was determined using live/dead staining and cell membrane integrity studies through lactate dehydrogenase (LDH quantification. The PEG coated HNPs did not show significant cytotoxic effect or adverse cellular response on exposure to 7F2 cells (p < 0.05 and were carried forward for scaffold incorporation. The pNiPAM-HNP composite scaffolds were investigated for their potential as thermally triggered systems using a Q-switched Nd:YAG laser. These studies show that incorporation of HNPs resulted in scaffold deformation after very short irradiation times (seconds due to internal structural heating. Our data highlights the potential of these hybrid-scaffold constructs for exploitation in drug delivery, using methylene blue as a model drug being released during remote structural change of the scaffold.

  2. Development of real-time monitoring and control in COIL laser cutting for joint R and D between Korea and U.S

    Chung, Chin Man; Kim, Cheol Jung; Kim, Min Suk; Baik, Sung Hoon; Kwon, Sung Ok; Park, Sun Kyu


    The laser monitoring and control technique investigated to experiment for cutting kerf width and result of laser cutting for D and D of nuclear facility. The demands for this laser monitoring and control technique were applied to process control in laser cutting and to fabricate monitoring and control system, focusing lens assembly. This system can had a advantage to monitor and control the laser cutting on real time. KAERI investigated the COIL laser and monitored 2 kW laser power.

  3. Near-infrared–actuated devices for remotely controlled drug delivery

    Timko, Brian P.; Arruebo, Manuel; Shankarappa, Sahadev A.; McAlvin, J. Brian; Okonkwo, Obiajulu S.; Mizrahi, Boaz; Stefanescu, Cristina F.; Gomez, Leyre; Zhu, Jia; Zhu, Angela; Santamaria, Jesus; Langer, Robert; Kohane, Daniel S.


    A reservoir that could be remotely triggered to release a drug would enable the patient or physician to achieve on-demand, reproducible, repeated, and tunable dosing. Such a device would allow precise adjustment of dosage to desired effect, with a consequent minimization of toxicity, and could obviate repeated drug administrations or device implantations, enhancing patient compliance. It should exhibit low off-state leakage to minimize basal effects, and tunable on-state release profiles that could be adjusted from pulsatile to sustained in real time. Despite the clear clinical need for a device that meets these criteria, none has been reported to date to our knowledge. To address this deficiency, we developed an implantable reservoir capped by a nanocomposite membrane whose permeability was modulated by irradiation with a near-infrared laser. Irradiated devices could exhibit sustained on-state drug release for at least 3 h, and could reproducibly deliver short pulses over at least 10 cycles, with an on/off ratio of 30. Devices containing aspart, a fast-acting insulin analog, could achieve glycemic control after s.c. implantation in diabetic rats, with reproducible dosing controlled by the intensity and timing of irradiation over a 2-wk period. These devices can be loaded with a wide range of drug types, and therefore represent a platform technology that might be used to address a wide variety of clinical indications. PMID:24474759

  4. Remote Control Childhood: Combating the Hazards of Media Culture in Schools

    Levin, Diane


    Background: Media culture touches most aspects of the lives of children growing up today, beginning at the earliest ages. It is profoundly the lessons children learn as well as how they learn, thereby contributing to what this article characterizes as "remote control childhood." Educators need to understand remote control childhood so…

  5. Estimating the Infrared Radiation Wavelength Emitted by a Remote Control Device Using a Digital Camera

    Catelli, Francisco; Giovannini, Odilon; Bolzan, Vicente Dall Agnol


    The interference fringes produced by a diffraction grating illuminated with radiation from a TV remote control and a red laser beam are, simultaneously, captured by a digital camera. Based on an image with two interference patterns, an estimate of the infrared radiation wavelength emitted by a TV remote control is made. (Contains 4 figures.)

  6. Estimating the Infrared Radiation Wavelength Emitted by a Remote Control Device Using a Digital Camera

    Catelli, Francisco; Giovannini, Odilon; Bolzan, Vicente Dall Agnol


    The interference fringes produced by a diffraction grating illuminated with radiation from a TV remote control and a red laser beam are, simultaneously, captured by a digital camera. Based on an image with two interference patterns, an estimate of the infrared radiation wavelength emitted by a TV remote control is made. (Contains 4 figures.)

  7. Mini-remote-control Antenna for On-body Wireless Communication Systems

    Larsen, Lauge K.; Kvist, Søren Helstrup; Yatman, William H.


    Two commercially available, compact antennas are evaluated for use in a small 55mm 39mm 15mm Remote Control (RC). The influence of the body on the path gain (jS21j) at 2:45 GHz between the remote control and a monopole parallel to the side of the head is evaluated. The measurements are made on tw...

  8. Medical Devices; Cardiovascular Devices; Classification of the Steerable Cardiac Ablation Catheter Remote Control System. Final order.


    The Food and Drug Administration (FDA) is classifying the steerable cardiac ablation catheter remote control system into class II (special controls). The special controls that will apply to the device are identified in this order and will be part of the codified language for the steerable cardiac ablation catheter remote control system's classification. The Agency is classifying the device into class II (special controls) in order to provide a reasonable assurance of safety and effectiveness of the device.

  9. Controlled Remote Implementation of an Arbitrary Single-Qubit Operation with Partially Entangled Quantum Channel

    Lin, Jun-You; He, Jun-Gang; Gao, Yan-Chun; Li, Xue-Mei; Zhou, Ping


    We present a scheme for controlled remote implementation of an arbitrary single-qubit operation by using partially entangled states as the quantum channel. The sender can remote implement an arbitrary single-qubit operation on the remote receiver's quantum system via partially entangled states under the controller's control. The success probability for controlled remote implementation of quantum operation can achieve 1 if the sender and the controller perform proper projective measurements on their entangled particles. Moreover, we also discuss the scheme for remote sharing the partially unknown operations via partially entangled quantum channel. It is shown that the quantum entanglement cost and classical communication can be reduced if the implemented operation belongs to the restrict sets.

  10. Effect of Process Parameter in Laser Cutting of PMMA Sheet and ANFIS Modelling for Online Control

    Hossain Anamul


    Full Text Available Laser beam machining (LBM is a promising and high accuracy machining technology in advanced manufacturing process. In LBM, crucial machining qualities of the end product include heat affected zone, surface roughness, kerf width, thermal stress, taper angle etc. It is essential for industrial applications especially in laser cutting of thermoplastics to acquire output product with minimum kerf width. The kerf width is dependent on laser input parameters such as laser power, cutting speed, standoff distance, assist gas pressure etc. However it is difficult to get a functional relationship due to the high uncertainty among these parameters. Hence, total 81 sets of full factorial experiment were conducted, representing four input parameters with three different levels. The experiments were performed by a continuous wave (CW CO2 laser with the mode structure of TEM01 named Zech laser machine that can provide maximum laser power up to 500 W. The polymethylmethacrylate (PMMA sheet with thickness of 3.0 mm was used for this experiment. Laser power, cutting speed, standoff distance and assist gas pressure were used as input parameters for the output named kerf width. Standoff distance, laser power, cutting speed and assist gas pressure have the dominant effect on kerf width, respectively, although assist gas has some significant effect to remove the harmful gas. ANFIS model has been developed for online control purposes. This research is considered important and helpful for manufacturing engineers in adjusting and decision making of the process parameters in laser manufacturing industry of PMMA thermoplastics with desired minimum kerf width as well as intricate shape design purposes.

  11. E-Control: First Public Release of Remote Control Software for VLBI Telescopes

    Neidhardt, Alexander; Ettl, Martin; Rottmann, Helge; Ploetz, Christian; Muehlbauer, Matthias; Hase, Hayo; Alef, Walter; Sobarzo, Sergio; Herrera, Cristian; Himwich, Ed


    Automating and remotely controlling observations are important for future operations in a Global Geodetic Observing System (GGOS). At the Geodetic Observatory Wettzell, in cooperation with the Max-Planck-Institute for Radio Astronomy in Bonn, a software extension to the existing NASA Field System has been developed for remote control. It uses the principle of a remotely accessible, autonomous process cell as a server extension for the Field System. The communication is realized for low transfer rates using Remote Procedure Calls (RPC). It uses generative programming with the interface software generator developed at Wettzell. The user interacts with this system over a modern graphical user interface created with wxWidgets. For security reasons the communication is automatically tunneled through a Secure Shell (SSH) session to the telescope. There are already successful test observations with the telescopes at O Higgins, Concepcion, and Wettzell. At Wettzell the software is already used routinely for weekend observations. Therefore the first public release of the software is now available, which will also be useful for other telescopes.

  12. CO₂ laser welding of corneal cuts with albumin solder using radiometric temperature control.

    Strassmann, Eyal; Livny, Eitan; Loya, Nino; Kariv, Noam; Ravid, Avi; Katzir, Abraham; Gaton, Dan D


    To examine the efficacy and reproducibility of CO₂ laser soldering of corneal cuts using real-time infrared fiber-optic radiometric control of tissue temperature in bovine eyes (in vitro) and to evaluate the duration of this procedure in rabbit eyes (in vivo). In vitro experiment: a 6-mm central perforating cut was induced in 40 fresh bovine eyes and sealed with a CO₂ laser, with or without albumin soldering, following placement of a single approximating nylon suture. A fiber-optic radiometric temperature control system for the CO₂ laser was used. Leaking pressure and histological findings were analyzed and compared between groups. In vivo experiment: following creation of a central perforation, 6 rabbit eyes were treated with a CO₂ laser with albumin solder and 6 rabbit eyes were treated with 10-0 nylon sutures. The amount of time needed for completion of the procedures was compared. In vitro experiment: effective sealing was achieved by CO₂ laser soldering. Mean (± SD) leaking pressure was 109 ± 30 mm Hg in the bovine corneas treated by the laser with albumin solder compared to 51 ± 7 mm Hg in the sutured control eyes (n = 10 each; p laser without albumin solder (48 ± 12 mm Hg) and in the cuts sealed only with albumin without laser welding (6.3 ± 4 mm Hg) than in the cuts treated with laser welding and albumin solder. In vivo experiment: mean surgical time was 140 ± 17 s in the laser-treated rabbits compared to 330 ± 30 s in the sutured controls (n = 6; p laser soldering revealed sealed corneal edges with a small gap bridged by coagulated albumin. The inflammatory reaction was minimal in contrast to the sutured controls. No thermal damage was detected at the wound edges. CO₂ laser soldering combined with the fiber-optic radiometer is an effective, reliable, and rapid tool for the closure of corneal wounds, and holds advantages over conventional suturing in terms of leaking pressure and surgical time. Copyright © 2013 S. Karger AG, Basel.

  13. Oxygenated Phosphine Fumigation for Control of Light Brown Apple Moth (Lepidoptera: Tortricidae) Eggs on Cut-Flowers.

    Liu, Samuel S; Liu, Yong-Biao; Simmons, Gregory S


    Light brown apple moth, Epiphyas postvittana (Walker), eggs were subjected to oxygenated phosphine fumigation treatments under 70% oxygen on cut flowers to determine efficacy and safety. Five cut flower species: roses, lilies, tulips, gerbera daisy, and pompon chrysanthemums, were fumigated in separate groups with 2,500 ppm phosphine for 72 h at 5°C. Egg mortality and postharvest quality of cut flowers were determined after fumigation. Egg mortalities of 99.7-100% were achieved among the cut flower species. The treatment was safe to all cut flowers except gerbera daisy. A 96-h fumigation treatment with 2,200 ppm phosphine of eggs on chrysanthemums cut flowers also did not achieve complete control of light brown apple moth eggs. A simulation of fumigation in hermetically sealed fumigation chambers with gerbera daisy showed significant accumulations of carbon dioxide and ethylene by the end of 72-h sealing. However, oxygenated phosphine fumigations with carbon dioxide and ethylene absorbents did not reduce the injury to gerbera daisy, indicating that it is likely that phosphine may directly cause the injury to gerbera daisy cut flowers. The study demonstrated that oxygenated phosphine fumigation is effective against light brown apple moth eggs. However, it may not be able to achieve the probit9 quarantine level of control and the treatment was safe to most of the cut flower species.

  14. Asymmetric Bidirectional Controlled Remote State Preparation by Using a Seven-Particle Entangled State

    Sang, Zhi-wen


    We demonstrate that a seven-particle entangled state can be used to realize the deterministic asymmetric bidirectional controlled remote state preparation. That is to say Alice can remotely prepare an arbitrary known single-particle state for Bob and at the same time Bob can remotely prepare an arbitrary known two-particle state for Alice with the help of the supervisor Charlie. In our scheme, only single-particle projective measurements and two-particle projective measurement are needed.

  15. Data acquisition, remote control and equipment monitoring for ISOLDE RILIS

    Rossel, R E; Richter, D; Wendt, K D A; Rothe, S; Marsh, B A


    With a steadily increasing on-line operation time up to a record 3000 h in the year 2012, the Resonance Ionization Laser Ion Source (RILIS) is one of the key components of the ISOLDE on-line isotope user facility at CERN. Ion beam production using the RILIS is essential for many experiments due to the unmatched combination of ionization efficiency and selectivity. To meet the reliability requirements the RILIS is currently operated in shift duty for continuous maintenance of crucial laser parameters such as wavelength, power, beam position and timing, as well as ensuring swift intervention in case of an equipment malfunction. A recent overhaul of the RILIS included the installation of new pump lasers, commercial dye lasers and a complementary, fully solid-state titanium:sapphire laser system. The framework of the upgrade also required the setup of a network-extended, LabVIEW-based system for data acquisition, remote control and equipment monitoring, to support RILIS operators as well as ISOLDE users. The syst...

  16. Remotely controllable WDM-PON technology for wireless fronthaul/backhaul application

    Eiselt, Michael H.; Wagner, Christoph; Lawin, Mirko


    Low-cost WDM-PON solutions for fronthaul and backhaul applications will include remotely controlled tail-end transceivers. We report on control aspects of these transceivers and how standardization is evolving to enable these applications....

  17. Comparison of Human Pilot (Remote) Control Systems in Multirotor Unmanned Aerial Vehicle Navigation

    Mahayuddin, Zainal Rasyid; Mohd Jais, Hairina; Arshad, Haslina


    .... In this paper, a comparison was made between different proposed remote control systems and devices to navigate multirotor UAV, like hand-controllers, gestures and body postures techniques, and vision-based techniques...

  18. Ground-remote control for space station telerobotics with time delay

    Backes, Paul G.


    The study proposes a ground-remote telerobot control architecture which could be used for control of Space Station Freedom manipulators. The architecture provides two local-site operator control stations representing potential earth-based and remote Space Station-based operator control stations. A unified control system at the remote site provides autonomous, shared, and teleoperation control for single-and dual-arm task execution. An operational laboratory system which demonstrates the feasibility of various technologies in the proposed architecture, including teleoperation, shared control, and supervised autonomy, is described. Enhancements to the system currently under development, including remote site implementation in Ada, integration and control of a redundant 7-DOF manipulator, and local site advanced operator aids, are also described.

  19. Remote control radioactive-waste removal system uses modulated laser transmitter

    Burcher, E. E.; Kopia, L. P.; Rowland, C. W.; Sinclair, A. R.


    Laser remote control system consists of transmitter, auto tracker, and receiver. Transmitter and tracker, packaged together and bore sighted, constitute control station, receiver is slave station. Model has five command channels and optical link operating range of 110 m.

  20. Automatic quality control in the production of ceramic substrates by pulsed laser cutting

    Morace, Renate Erica; Hansen, Hans Nørgaard; De Chiffre, Leonardo


    This paper deals with the use of optical coordinate measuring machines (CMMs) in the quality control of ceramic substrates produced by a CO2 pulsed laser. A procedure of automatic measurements on a CMM equipped with a CCD camera was developed. In particular, the number and the distribution...... of cavities on the cut face of thin ceramic substrates were investigated and different strategies to assess the depth and the pitch of cavities were compared. Then, the measurement uncertainty for these two critical parameters was evaluated using the method described in ISO/TS 15530-3....

  1. Remote Control Techniques to the Digital Storage Oscilloscope by GPIB and VISA

    Faquan Zhang


    Full Text Available Some techniques of controlling remotely the digital storage oscilloscope were proposed including VISA, VXIplug&play drivers, TVC and IVI-COM drivers. By means of GPIB and VISA, several application development environments could be used to develop remote control techniques to the digital storage oscilloscope. The programming language of Visual C++ was used to develop software. With the help of VISA and the dynamic link library, remote control to the digital storage oscilloscope through network was completed. All operations to the digital storage oscilloscope including parameters setup, data acquisition, waveform acquisition and storage, data processing were implemented in a remote place. The results show that the techniques of remote control are convenient and efficient and fit for experiments of scientific research and practical projects.

  2. Ethernet Based Remote Monitoring And Control Of Temperature By Using Rabbit Processor



    Full Text Available Networking is a major component of the processes and control instrumentation systems as the network’s architecture solves many of the Industrial automation problems. There is a great deal of benefits in the process of industrial parameters to adopt the Ethernet control system. Hence an attempt has been made to develop an Ethernet based remote monitoring and control of temperature. In the present work the experimental result shows that remote monitoring and control system (RMACS over the Ethernet.

  3. Evaluation of a Remote Monitoring System for Diabetes Control.

    Katalenich, Bonnie; Shi, Lizheng; Liu, Shuqian; Shao, Hui; McDuffie, Roberta; Carpio, Gandahari; Thethi, Tina; Fonseca, Vivian


    The use of technology to implement cost-effective health care management on a large scale may be an alternative for diabetes management but needs to be evaluated in controlled trials. This study assessed the utility and cost-effectiveness of an automated Diabetes Remote Monitoring and Management System (DRMS) in glycemic control versus usual care. In this randomized, controlled study, patients with uncontrolled diabetes on insulin were randomized to use of the DRMS or usual care. Participants in both groups were followed up for 6 months and had 3 clinic visits at 0, 3, and 6 months. The DRMS used text messages or phone calls to remind patients to test their blood glucose and to report results via an automated system, with no human interaction unless a patient had severely high or low blood glucose. The DRMS made adjustments to insulin dose(s) based on validated algorithms. Participants reported medication adherence through the Morisky Medication Adherence Scale-8, and diabetes-specific quality of life through the diabetes Daily Quality of Life questionnaire. A cost-effectiveness analysis was conducted based on the estimated overall costs of DRMS and usual care. A total of 98 patients were enrolled (59 [60%] female; mean age, 59 years); 87 participants (89%) completed follow-up. HbA1c was similar between the DRMS and control groups at 3 months (7.60% vs 8.10%) and at 6 months (8.10% vs 7.90%). Changes from baseline to 6 months were not statistically significant for self-reported medication adherence and diabetes-specific quality of life, with the exception of the Daily Quality of Life-Social/Vocational Concerns subscale score (P = 0.04). An automated system like the DRMS may improve glycemic control to the same degree as usual clinic care and may significantly improve the social/vocational aspects of quality of life. Cost-effectiveness analysis found DRMS to be cost-effective when compared to usual care and suggests DRMS has a good scale of economy for program scale

  4. Remote Control of an Assistive Robot using Force Feedback

    Nadrag, Paul; Temzi, Lounis; Arioui, Hichem; Hoppenot, Philippe


    International audience; In this paper, we consider the haptic teleoperation of an assistive mobile robot, used for exploring a domestic environment. The goal of the paper is to help the remote operator to pilot the robot by giving him not only video feedback but also haptic feedback. They are both complementary as they do not require the same kind of attention from the user. The proposed haptic architecture was found to improve operator perception of the remote environment under time delay co...

  5. Remote Control of TJ-II Diagnostics; Control Remoto de Diagnosticos del Dispositivo TJ-II

    Lopez Sanchez, A.; Vega, J.; Montoro, A.; Encabo, J.


    The present paper is about the design and development of ten remote control diagnostic systems used in the study of plasma fusion in the TJ-II device installed at CIEMAT. This development goes from the definition of sensors and devices necessary in carrying out these remote controls, to its assembly, wiring, development of electronic circuits inserted between sensors and PLC, development of programs for these PLC, connections and administration of the real time automation network, and later development of the necessary programs via the appropriate software tools for web access through a navigator to a specific web page, allowing visual and real time access over the auxiliary systems that make up all the diagnostics. (Author)

  6. Interference from a hand held radiofrequency remote control causing discharge of an implantable defibrillator.

    Man, K C; Davidson, T; Langberg, J J; Morady, F; Kalbfleisch, S J


    A 46-year-old man with a history of sustained monomorphic ventricular tachycardia underwent an implantation of a third generation multiprogrammable implantable cardioverter defibrillator. One year post implant, while manipulating a remote control to a radiofrequency modulated toy car, the patient experienced a defibrillator discharge not preceded by an arrhythmia prodrome. Subsequent interrogation of the defibrillator revealed that a 34-joule shock had been delivered and had been preceded by RR intervals ranging from 141-406 msec, consistent with sensing lead noise. The remote control utilizes a 12-volt battery and has a carrier frequency of 75.95 MHz and a modulating frequency of 50 Hz. Evaluation of the remote control and defibrillator interaction revealed that the remote control was able to trigger tachyarrhythmia sensing and reproduce the clinical episode. Interference was present only when the remote control was within 8 cm of the pulse generator and at specific angles relative to the device and only when the antenna length was > 45 cm. Interference was eliminated when a ground wire was attached to the antenna and when an aluminium shield was placed between the pulse generator and the remote control. This case report suggests that patients with third generation multiprogrammable defibrillators should be cautioned against close contact with potential sources of electromagnetic interference, such as remote control units.

  7. Data acquisition, remote control and equipment monitoring for ISOLDE RILIS

    Rossel, R.E., E-mail: [CERN, Geneva (Switzerland); Institut für Physik, Johannes Gutenberg-Universität, Mainz (Germany); Hochschule RheinMain, Fachbereich Design Informatik Medien, Wiesbaden (Germany); Fedosseev, V.N.; Marsh, B.A. [CERN, Geneva (Switzerland); Richter, D. [Hochschule RheinMain, Fachbereich Design Informatik Medien, Wiesbaden (Germany); Rothe, S. [CERN, Geneva (Switzerland); Institut für Physik, Johannes Gutenberg-Universität, Mainz (Germany); Wendt, K.D.A. [Institut für Physik, Johannes Gutenberg-Universität, Mainz (Germany)


    Highlights: • The requirements for continuous and automated RILIS operation are outlined. • Laser wavelength, power, beam position and pulse timing are continuously monitored. • A network-extended LabVIEW-based equipment operation framework was developed. • The system serves as a foundation for collaborative laser spectroscopy data acquisition. • Example applications have been successfully tested with ISOLDE experiment setups. -- Abstract: With a steadily increasing on-line operation time up to a record 3000 h in the year 2012, the Resonance Ionization Laser Ion Source (RILIS) is one of the key components of the ISOLDE on-line isotope user facility at CERN. Ion beam production using the RILIS is essential for many experiments due to the unmatched combination of ionization efficiency and selectivity. To meet the reliability requirements the RILIS is currently operated in shift duty for continuous maintenance of crucial laser parameters such as wavelength, power, beam position and timing, as well as ensuring swift intervention in case of an equipment malfunction. A recent overhaul of the RILIS included the installation of new pump lasers, commercial dye lasers and a complementary, fully solid-state titanium:sapphire laser system. The framework of the upgrade also required the setup of a network-extended, LabVIEW-based system for data acquisition, remote control and equipment monitoring, to support RILIS operators as well as ISOLDE users. The system contributes to four key aspects of RILIS operation: equipment monitoring, machine protection, automated self-reliance, and collaborative data acquisition. The overall concept, technologies used, implementation status and recent applications during the 2012 on-line operation period will be presented along with a summary of future developments.

  8. Eye injury risk associated with remote control toy helicopter blades.

    Alphonse, Vanessa D; Kemper, Andrew R; Rowson, Steven; Duma, Stefan M


    Eye injuries can be caused by a variety of consumer products and toys. Recently, indoor remote controlled (RC) toy helicopters have become very popular. The purpose of this study is to quantify eye injury risk associated with five commercially available RC toy helicopter blades. An experimental matrix of 25 tests was developed to test five different RC toy helicopter blades at full battery power on six postmortem human eyes. A pressure sensor inserted through the optic nerve measured intraocular pressure. Corneal abrasion was assessed post-impact using fluorescein dye. Intraocular pressure was correlated to injury risk for hyphema, lens damage, retinal damage, and globe rupture using published risk functions. All tests resulted in corneal abrasions; however, no other injuries were observed. The 25 tests produced an increase intraocular pressure between 15.2 kPa and 99.3 kPa (114.3 mmHg and 744.7 mmHg). Calculated blade velocities ranged between 16.0 m/s and 25.4 m/s. Injury risk for hyphema was a maximum of 0.2%. Injury risk for lens damage, retinal damage, and globe rupture was 0.0% for all tests. Blade design parameters such as length and mass did not affect the risk of eye injury. This is the first study to quantify the risk of eye injury from RC toy helicopter blades. While corneal abrasions were observed, more serious eye injuries were neither observed nor predicted to have occurred. Results from this study are critical for establishing safe design thresholds for RC toy helicopter blades so that more serious injuries can be prevented.

  9. 47 CFR 95.419 - (CB Rule 19) May I operate my CB station transmitter by remote control?


    ... transmitter by remote control? 95.419 Section 95.419 Telecommunication FEDERAL COMMUNICATIONS COMMISSION... Operate A Cb Station § 95.419 (CB Rule 19) May I operate my CB station transmitter by remote control? (a) You may not operate a CB station transmitter by radio remote control. (b) You may operate a CB...

  10. The remote methods for radwaste and SNF control

    Ivanov, O.; Stepanov, V.; Danilovich, A.; Potapov, V.


    With the examples of developments carried out in the Kurchatov Institute and by the world leaders in the field the presentation considers the devices and methods to obtain remotely information on the distribution of radioactivity in radwaste and SNF. It describes the different types of light portable gamma cameras. The application of scanning spectrometric systems is considers also. The methods of recording UV radiation for detection of alpha contamination with the luminescence of air are presented. We discuss the scope and tasks that can be solved using remote and non-destructive methods.

  11. Optical Remote Sensing Laboratory

    Federal Laboratory Consortium — The Optical Remote Sensing Laboratory deploys rugged, cutting-edge electro-optical instrumentation for the collection of various event signatures, with expertise in...

  12. Controlling torque and cutting costs: steerable drill bits deliver in Latin America

    Barton, Steve; Garcia, Alexis; Amorim, Dalmo [ReedHycalog, Stonehouse (United Kingdom); Iramina, Wilson [University of Sao Paulo (USP), SP (Brazil); Herrera, Gabriel


    Tool face Control is widely regarded as one of the greatest directional drilling challenges with a Fixed Cutter (FC) drill bit on a Steerable Motor assembly. Tool face offset is proportional to the torque generated by the bit, and by nature, FC bits are capable of generating high levels of torque. If large changes in downhole torque are produced while drilling, this will cause rotation of the drill string, and loss of tool face orientation. This results in inefficient drilling and increases risk of bit and downhole tool damage. This paper examines the effect of various FC drill bit components to determine the key design requirements to deliver a smooth torque response and an improved directional performance. Included is a review of the results from comprehensive laboratory testing to determine the effectiveness of a number of different configurations of removable Torque Controlling Components (TCC). These, in combination with specific cutting structure layouts, combine to provide predictable torque response while optimized for high rates of penetration. In addition, unique gauge geometry is disclosed that was engineered to reduce drag and deliver improved borehole quality. This gauge design produces less torque when sliding and beneficial gauge pad interaction with the borehole when in rotating mode. Field performance studies from within Latin America clearly demonstrate that matching TCC, an optimized cutting structure, and gauge geometry to a steerable assembly delivers smooth torque response and improved directional control. Benefits with regard to improved stability are also discussed. Successful application has resulted in significant time and cost savings for the operator, demonstrating that Stability and Steerability improvements can be achieved with an increase in penetration rate. (author)

  13. Remote control of restricted sets of operations Teleportation of Angles

    Huelga, S F; Vaccaro, J A


    We study the remote implementation of a unitary transformation on a qubit. We show the existence of non-trivial protocols (i.e., using less resources than bidirectional state teleportation) which allow the perfect remote implementation of certain continuous sets of quantum operations. We prove that, up to a local change of basis, only two subsets exist that can be implemented remotely with a non-trivial protocol: Arbitrary rotations around a fixed direction $\\vec{n}$ and rotations by a fixed angle around an arbitrary direction lying in a plane orthogonal to $\\vec{n}$. The overall classical information and distributed entanglement cost required for the remote implementation depends on whether it is a priori known to which of the two teleportable subsets the transformation belongs to. If it is so, the optimal protocol consumes one e-bit of entanglement and one c-bit in each direction. If the subset is not known, two e-bits of entanglement need to be consumed while the classical channel becomes asymmetric, two c...

  14. Remote Labs and Game-Based Learning for Process Control

    Zualkernan, Imran A.; Husseini, Ghaleb A.; Loughlin, Kevin F.; Mohebzada, Jamshaid G.; El Gaml, Moataz


    Social networking platforms and computer games represent a natural informal learning environment for the current generation of learners in higher education. This paper explores the use of game-based learning in the context of an undergraduate chemical engineering remote laboratory. Specifically, students are allowed to manipulate chemical…

  15. Remote Labs and Game-Based Learning for Process Control

    Zualkernan, Imran A.; Husseini, Ghaleb A.; Loughlin, Kevin F.; Mohebzada, Jamshaid G.; El Gaml, Moataz


    Social networking platforms and computer games represent a natural informal learning environment for the current generation of learners in higher education. This paper explores the use of game-based learning in the context of an undergraduate chemical engineering remote laboratory. Specifically, students are allowed to manipulate chemical…


    Tímea Vas


      The concept of remote and mobile Air Traffic Control Tower (ATC TWR) and its development has started in Europe, Australia and also in the USA, in order to improve the efficiency of Air Traffic Management (ATM...

  17. Hydrologic control on the root growth of Salix cuttings at the laboratory scale

    Bau', Valentina; Calliari, Baptiste; Perona, Paolo


    Riparian plant roots contribute to the ecosystem functioning and, to a certain extent, also directly affect fluvial morphodynamics, e.g. by influencing sediment transport via mechanical stabilization and trapping. There is much both scientific and engineering interest in understanding the complex interactions among riparian vegetation and river processes. For example, to investigate plant resilience to uprooting by flow, one should quantify the probability that riparian plants may be uprooted during specific flooding event. Laboratory flume experiments are of some help to this regard, but are often limited to use grass (e.g., Avena and Medicago sativa) as vegetation replicate with a number of limitations due to fundamental scaling problems. Hence, the use of small-scale real plants grown undisturbed in the actual sediment and within a reasonable time frame would be particularly helpful to obtain more realistic flume experiments. The aim of this work is to develop and tune an experimental technique to control the growth of the root vertical density distribution of small-scale Salix cuttings of different sizes and lengths. This is obtained by controlling the position of the saturated water table in the sedimentary bed according to the sediment size distribution and the cutting length. Measurements in the rhizosphere are performed by scanning and analysing the whole below-ground biomass by means of the root analysis software WinRhizo, from which root morphology statistics and the empirical vertical density distribution are obtained. The model of Tron et al. (2015) for the vertical density distribution of the below-ground biomass is used to show that experimental conditions that allow to develop the desired root density distribution can be fairly well predicted. This augments enormously the flexibility and the applicability of the proposed methodology in view of using such plants for novel flow erosion experiments. Tron, S., Perona, P., Gorla, L., Schwarz, M., Laio, F

  18. Multibeam fiber laser cutting

    Olsen, Flemming Ove; Hansen, Klaus Schütt; Nielsen, Jakob Skov


    The appearance of the high power high brilliance fiber laser has opened for new possibilities in laser materials processing. In laser cutting this laser has demonstrated high cutting performance compared to the dominating Cutting laser, the CO2 laser. However, quality problems in fiber-laser...... cutting have until now limited its application to metal cutting. In this paper the first results of proof-of-principle Studies applying a new approach (patent pending) for laser cutting with high brightness and short wavelength lasers will be presented. In the approach, multibeam patterns are applied...... to control the melt flow out of the cut kerf resulting in improved cut quality in metal cutting. The beam patterns in this study are created by splitting up beams from two single mode fiber lasers and combining these beams into a pattern in the cut kerf. The results are obtained with a total of 550 W...

  19. Multibeam Fibre Laser Cutting

    Olsen, Flemming Ove

    The appearance of the high power high brilliance fibre laser has opened for new possibilities in laser materials processing. In laser cutting this laser has demonstrated high cutting performance compared to the dominating cutting laser, the CO2-laser. However, quality problems in fibre-laser...... cutting have until now limited its application in metal cutting. In this paper the first results of proof-of-principle studies applying a new approach (patent pending) for laser cutting with high brightness short wavelength lasers will be presented. In the approach, multi beam patterns are applied...... to control the melt flow out of the cut kerf resulting in improved cut quality in metal cutting. The beam patterns in this study are created by splitting up beams from 2 single mode fibre lasers and combining these beams into a pattern in the cut kerf. The results are obtained with a total of 550 W of single...

  20. Secure Remote Access Issues in a Control Center Environment

    Pitts, Lee; McNair, Ann R. (Technical Monitor)


    The ISS finally reached an operational state and exists for local and remote users. Onboard payload systems are managed by the Huntsville Operations Support Center (HOSC). Users access HOSC systems by internet protocols in support of daily operations, preflight simulation, and test. In support of this diverse user community, a modem security architecture has been implemented. The architecture has evolved over time from an isolated but open system to a system which supports local and remote access to the ISS over broad geographic regions. This has been accomplished through the use of an evolved security strategy, PKI, and custom design. Through this paper, descriptions of the migration process and the lessons learned are presented. This will include product decision criteria, rationale, and the use of commodity products in the end architecture. This paper will also stress the need for interoperability of various products and the effects of seemingly insignificant details.

  1. Magnetogenetics: Remote Control of Cellular Signaling with Magnetic Fields

    Sauer, Jeremy P.

    Means for temporally regulating gene expression and cellular activity are invaluable for elucidating the underlying physiological processes and have therapeutic implications. Here we report the development of a system for remote regulation of gene expression by low frequency radiowaves (RF) or by a static magnetic field. We accomplished this by first adding iron oxide nanoparticles - either exogenously or as genetically encoded ferritin/ferric oxyhydroxide particle. These particles have been designed with affinity to the plasma membrane ion channel Transient Receptor Potential Vanilloid 1 (TRPV1) by a conjugated antibody. Application of a magnetic field stimulates the particle to gate the ion channel and this, in turn, initiates calcium-dependent transgene expression. We first demonstrated in vitro that TRPV1 can be actuated to cause calcium flux into the cell by directly applying a localized magnetic field. In mice expressing these genetically encoded components, application of external magnetic field caused remote stimulation of insulin transgene expression and significantly lowered blood glucose. In addition, we are investigating mechanisms by which iron oxide nanoparticles can absorb RF, and transduce this energy to cause channel opening. This robust, repeatable method for remote cellular regulation in vivo may ultimately have applications in basic science, as well as in technology and therapeutics.

  2. Using remote substituents to control solution structure and anion binding in lanthanide complexes

    Tropiano, Manuel; Blackburn, Octavia A.; Tilney, James A.


    of the molecule, at a substantial distance from the binding pocket. Herein, we explore these remote substituent effects and explain the observed behaviour through discussion of the way in which remote substituents can influence and control the global structure of a molecule through their demands upon...... to isophthalate through a well-defined conformer. Addition of steric bulk remote from the binding site restricts conformational mobility, giving rise to an increase in binding constant on entropic grounds as long as the ideal binding conformation is not excluded from the available range of conformers....

  3. Remote control of a cooling system; Regelen en controleren op afstand

    Bassa, E. [ed.


    The renovation of a supermarket building in Nieuw-Lekkerland, Netherlands, included the replacement of the existing refrigerating facility. One of the arguments to choose a new unit was the introduction of the Hazard Analysis Critical Control Points (HACCP) quality control system. The new unit is equipped with a remote control system, using the most up-to-date instruments

  4. Effects of remote ischemic preconditioning in high-risk patients undergoing cardiac surgery (Remote IMPACT): a randomized controlled trial.

    Walsh, Michael; Whitlock, Richard; Garg, Amit X; Légaré, Jean-François; Duncan, Andra E; Zimmerman, Robert; Miller, Scott; Fremes, Stephen; Kieser, Teresa; Karthikeyan, Ganesan; Chan, Matthew; Ho, Anthony; Nasr, Vivian; Vincent, Jessica; Ali, Imtiaz; Lavi, Ronit; Sessler, Daniel I; Kramer, Robert; Gardner, Jeff; Syed, Summer; VanHelder, Tomas; Guyatt, Gordon; Rao-Melacini, Purnima; Thabane, Lehana; Devereaux, P J


    Remote ischemic preconditioning is a simple therapy that may reduce cardiac and kidney injury. We undertook a randomized controlled trial to evaluate the effect of this therapy on markers of heart and kidney injury after cardiac surgery. Patients at high risk of death within 30 days after cardiac surgery were randomly assigned to undergo remote ischemic preconditioning or a sham procedure after induction of anesthesia. The preconditioning therapy was three 5-minute cycles of thigh ischemia, with 5 minutes of reperfusion between cycles. The sham procedure was identical except that ischemia was not induced. The primary outcome was peak creatine kinase-myocardial band (CK-MB) within 24 hours after surgery (expressed as multiples of the upper limit of normal, with log transformation). The secondary outcome was change in creatinine level within 4 days after surgery (expressed as log-transformed micromoles per litre). Patient-important outcomes were assessed up to 6 months after randomization. We randomly assigned 128 patients to remote ischemic preconditioning and 130 to the sham therapy. There were no significant differences in postoperative CK-MB (absolute mean difference 0.15, 95% confidence interval [CI] -0.07 to 0.36) or creatinine (absolute mean difference 0.06, 95% CI -0.10 to 0.23). Other outcomes did not differ significantly for remote ischemic preconditioning relative to the sham therapy: for myocardial infarction, relative risk (RR) 1.35 (95% CI 0.85 to 2.17); for acute kidney injury, RR 1.10 (95% CI 0.68 to 1.78); for stroke, RR 1.02 (95% CI 0.34 to 3.07); and for death, RR 1.47 (95% CI 0.65 to 3.31). Remote ischemic precnditioning did not reduce myocardial or kidney injury during cardiac surgery. This type of therapy is unlikely to substantially improve patient-important outcomes in cardiac surgery., no. NCT01071265. © 2016 Canadian Medical Association or its licensors.


    Henrique Moreira Link


    Full Text Available Four experiments  were carried out to evaluate the efficiency of some powdered formicides on the control of the black leaf cutting ant, Acromyrmex crassispinus (Forel, 1909 (Hymenoptera: Formicidae, in Santa Maria county, from 1996 until 1998. Powdered formicides containing  Fenthion at 50g a. i./kg, Imidacloprid at  4g a. i./kg, Betacyfluthrin at 2g a. i./kg, Chlorpyrifos at 20g a. i./kg and at 50g a. i./kg, Deltamethrin at  2g a. i./kg, Acephate at 750g a. i./kg and Diazinon at 10g a. i./kg were evaluated on big nests (>80cm of diameter. The big nests of this ant were efficiently controlled with 30g/nest of the commercial formulations of Fenthion, Diazinon and Chlorpyrifos (20g a. i./kg and  50g a. i./kg; with 3g/nest of the formulation of Acephate; with 5g/nest in dry season and 30g/nest in wet season of the powdered formulation of Deltamethrin.

  6. Active Noise Control in Ventilation Duct A Prototype for Remote Laboratory

    Muthusamy, Dineshkumar; Ahmad,Waqas


    Remote laboratories using real equipments for engineering studies is becoming popular in recent time. Blekinge Institute of Technology (BTH), Sweden has pioneered developing remote laboratories through VISIR project and its collaboration with other universities. Active control of sound and vibration is one area in which BTH has substantial research background and provides courses like adaptive signal processing, sound and vibration analysis, optimum signal processing and so on. The fact that ...

  7. Cutting state identification

    Berger, B.S.; Minis, I.; Rokni, M. [Univ. of Maryland, College Park, MD (United States)] [and others


    Cutting states associated with the orthogonal cutting of stiff cylinders are identified through an analysis of the singular values of a Toeplitz matrix of third order cumulants of acceleration measurements. The ratio of the two pairs of largest singular values is shown to differentiate between light cutting, medium cutting, pre-chatter and chatter states. Sequences of cutting experiments were performed in which either depth of cut or turning frequency was varied. Two sequences of experiments with variable turning frequency and five with variable depth of cut, 42 cutting experiments in all, provided a database for the calculation of third order cumulants. Ratios of singular values of cumulant matrices find application in the analysis of control of orthogonal cutting.

  8. Design and Research of Intelligent Remote Control Fan Based on Single Chip Microcomputer and Bluetooth Technology

    Zhang Xue-Xia


    Full Text Available This paper is designed for intelligent remote control fans. The design of the microcontroller as the core, the sensor, Bluetooth and Andrews system applied to the design of intelligent remote control fan. According to the temperature sensor to achieve the indoor temperature collection, to achieve and set the temperature comparison, thus affecting the fan speed. At the same time, the system according to the infrared sensor components to detect external factors, in order to achieve the running or stopping of the fan, that is, to achieve intelligent control of the fan. In addition, the system achieve the Bluetooth and mobile phone Andrews system of effective combination, and through the software program to complete the fan remote operation and wind speed control.

  9. A secure and reliable monitor and control system for remote observing with the Large Millimeter Telescope

    Wallace, Gary; Souccar, Kamal; Malin, Daniella


    Remote access to telescope monitor and control capabilities necessitates strict security mechanisms to protect the telescope and instruments from malicious or unauthorized use, and to prevent data from being stolen, altered, or corrupted. The Large Millimeter Telescope (LMT) monitor and control system (LMTMC) utilizes the Common Object Request Broker Architecture (CORBA) middleware technology to connect remote software components. The LMTMC provides reliable and secure remote observing by automatically generating SSLIOP enabled CORBA objects. TAO, the ACE open source Object Request Broker (ORB), now supports secure communications by implementing the Secure Socket Layer Inter-ORB Protocol (SSLIOP) as a pluggable protocol. This capability supplies the LMTMC with client and server authentication, data integrity, and encryption. Our system takes advantage of the hooks provided by TAO SSLIOP to implement X.509 certificate based authorization. This access control scheme includes multiple authorization levels to enable granular access control.

  10. A computer simulation experiment of supervisory control of remote manipulation. M.S. Thesis

    Mccandlish, S. G.


    A computer simulation of a remote manipulation task and a rate-controlled manipulator is described. Some low-level automatic decision making ability which could be used at the operator's discretion to augment his direct continuous control was built into the manipulator. Experiments were made on the effect of transmission delay, dynamic lag, and intermittent vision on human manipulative ability. Delay does not make remote manipulation impossible. Intermittent visual feedback, and the absence of rate information in the display presented to the operator do not seem to impair the operator's performance. A small-capacity visual feedback channel may be sufficient for remote manipulation tasks, or one channel might be time-shared between several operators. In other experiments the operator called in sequence various on-site automatic control programs of the machine, and thereby acted as a supervisor. The supervisory mode of operation has some advantages when the task to be performed is difficult for a human controlling directly.

  11. An investigation of motor learning during side-step cutting, design of a randomised controlled trial

    Lemmink Koen APM


    Full Text Available Abstract Background Of all athletic knee injuries an anterior cruciate ligament (ACL rupture results in the longest time loss from sport. Regardless of the therapy chosen, conservative or reconstructive, athletes are often forced to reduce their level of physical activity and their involvement in sport. Moreover, a recent review reported prevalences of osteoarthritis ranging from 0% to 13% for patients with isolated ACL-deficient (ACL-D knees and respectively 21% to 48% in patients with combined injuries. The need for ACL injury prevention is clear. The identification of risk factors and the development of prevention strategies may therefore have widespread health and economic implications. The focus of this investigation is to assess the role of implicit and explicit motor learning in optimising the performance of a side-step-cutting task. Methods/design A randomized controlled laboratory study will be conducted. Healthy basketball players, females and males, 18 years and older, with no previous lower extremity injuries, playing at the highest recreational level will be included. Subjects will receive a dynamic feedback intervention. Kinematic and kinetic data of the hip, knee and ankle and EMG activity of the quadriceps, hamstrings and gastrocnemius will be recorded. Discussion Female athletes have a significantly higher risk of sustaining an ACL injury than male athletes. Poor biomechanical and neuromuscular control of the lower limb is suggested to be a primary risk factor of an ACL injury mechanism in females. This randomized controlled trial has been designed to investigate whether individual feedback on task performance appears to be an effective intervention method. Results and principles found in this study will be applied to future ACL injury prevention programs, which should maybe more focus on individual injury predisposition. Trial registration Trial registration number NTR2250.

  12. Voltage magnitude and margin controller for remote industrial microgrid with high wind penetration

    Cai, Yu; Lin, Jin; Song, Yonghua


    It is well known that the remote industrial microgrid is located at the periphery of the grid, which is weakly connected to the main grid. In order to enhance the voltage stability and ensure a good power quality for industries, a voltage magnitude and margin controller based on wind turbines...... is proposed in this paper. This controller includes two parts to improve voltage stability in different time scales by using local measurements. Case studies conducted for a remote microgrid with high wind penetration have proved the effectiveness of the proposed control scheme....

  13. Two way satellite communication for telemetrology and remote control

    Hanebrekke, H.

    Low-data-rate satellite communication to fixed and floating buoys at sea, remote observation stations, and fishing vessels is studied. Particular attention is paid to Norwegian conditions, that is, high latitude and high mountains. Coverage and reliability measurements utilizing Inmarsat C and Prodat stations have been done along the coast of western and northern Norway, and on major roads in southern Norway. Good coverage is found in the coastal areas, with only 5 percent loss of messages when both the AOR and IOR satellites are used from the same location, whereas the land mobile experiments gave 40 percent to 70 percent loss, depending on the elevation angle. The possibility of using Inmarsat C or Prodat stations in the major fishing areas between Norway, Greenland, and Svalbard and in the Barents Sea are also being investigated. A method of data collection from ocean areas based on the fishing fleet is proposed.

  14. Mathematical defense method of networked servers with controlled remote backups

    Kim, Song-Kyoo


    The networked server defense model is focused on reliability and availability in security respects. The (remote) backup servers are hooked up by VPN (Virtual Private Network) with high-speed optical network and replace broken main severs immediately. The networked server can be represent as "machines" and then the system deals with main unreliable, spare, and auxiliary spare machine. During vacation periods, when the system performs a mandatory routine maintenance, auxiliary machines are being used for back-ups; the information on the system is naturally delayed. Analog of the N-policy to restrict the usage of auxiliary machines to some reasonable quantity. The results are demonstrated in the network architecture by using the stochastic optimization techniques.

  15. The use of a cutting balloon in contemporary reverse controlled antegrade and retrograde subintimal tracking (reverse CART) technique.

    Nakabayashi, Keisuke; Okada, Hisayuki; Oka, Toshiaki


    The key concept of reverse controlled antegrade and retrograde tracking (CART) technique is retrograde puncture with a tapered wire to an antegrade balloon (contemporary reverse CART) or new connections between the antegrade and retrograde subintimal space (classical reverse CART). In our case, a 75-year-old man with severe chronic total occlusion of the right coronary artery, reverse CART with conventional balloons could not be accomplished. Externalization wiring was completed by contemporary reverse CART using a cutting balloon as an antegrade balloon to improve the fenestration force of the retrograde guidewire. Thus, the use of a cutting balloon for contemporary reverse CART might be promising.


    Constantin POPESCU


    Full Text Available The authors contribution to this paper is to present a concept solution of a remote control robot (RCR used for decommissioning of the horizontal fuel channels pressure tube in the CANDU nuclear reactor. In this paper the authors highlight few details of geometry, operations, constraints by kinematics and dynamics of the robot movement inside of the reactor fuel channel. Inside operations performed has as the main steps of dismantling process the followings: unblock and extract the channel closure plug (from End Fitting - EF, unblock and extract the channel shield plug (from Lattice Tube - LT, cut the ends of the pressure tube, extract the pressure tube and cut it in small parts, sorting and storage extracted items in the safe robot container. All steps are performed in automatic mode. The remote control robot (RCR represents a safety system controlled by sensors and has the capability to analyze any error registered and decide next activities or abort the inside decommissioning procedure in case of any risk rise in order to ensure the environmental and workers protection.

  17. The precision cutting control research of automotive stainless steel thin wall pipe

    Jin Lihong


    Full Text Available Stainless steel thin-walled tube are widely used in automobile industry at present, but as a result of thin wall pipe is poor strength and poor rigidity,which lead to deformation, shaped differencer and other problems in the process, it is hard to ensure the processing quality of parts. This paper proposes a method of thin stainless steel thin wall pipe cutting process in vehicle, greatly improved the problems and technical difficulties in the traditional process, the main research is about the cutting system and the hydraulic fixture design, obtained under low cost circumstances, it can realize high precision stainless steel pipes, high degree of automation to automatic cutting,simplified operation steps at the same time, increased the applicability of the system, provided a kind of advanced stainless steel thin wall pipe cutting device for the small and medium-sized enterprises.

  18. Methodology of Remote Control of Competitive Swimmers’ Individual Energetic Profile Development

    Kh.A. Sanosyan


    Full Text Available The offered approach helps to estimate the correlation of swimmer’s major energetic mechanisms distantly (remotely in parallel to competition (training, basing on data, got by means of GPS and other devices. This methodology promotes efficient use of means of educational control, developed and tested before, implementing the concept of parallel control over training and competition.

  19. 46 CFR 111.70-7 - Remote control, interlock, and indicator circuits.


    ... 46 Shipping 4 2010-10-01 2010-10-01 false Remote control, interlock, and indicator circuits. 111.70-7 Section 111.70-7 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) ELECTRICAL ENGINEERING ELECTRIC SYSTEMS-GENERAL REQUIREMENTS Motor Circuits, Controllers, and Protection §...

  20. Study of design and control of remote manipulators. Part 1: Summary and conclusions

    Whitney, D. E.


    The long range objectives of the study of remote manipulators are discussed. The objectives discussed include: static and passive dynamic considerations in manipulator design; active control by man or man-computer combination; and integration of sensors, sensor control and displays.

  1. Fission yeast cut5 links nuclear chromatin and M phase regulator in the replication checkpoint control.

    Saka, Y.; Fantes, P; Sutani, T; McInerny, C; Creanor, J; Yanagida, M


    Fission yeast temperature-sensitive cut5 (cell untimely torn) mutants are defective in initiation and/or elongation of DNA replication but allow mitosis and cell division at a restrictive temperature. We show that the cut5 protein (identical to rad4) (i) is an essential component of the replication checkpoint system but not the DNA damage checkpoint, and (ii) negatively regulates the activation of M phase kinase at mitotic entry. Even if the replication checkpoint has been activated previousl...

  2. Technique of performing construction works by machines with hybrid: manual and remote control

    Sevryugina Nadezhda


    Full Text Available The article discusses issues dealing with efficiency of construction work mechanization. It offers a mathematical model for assessment of mutual influence between the members of the ‘construction site-machine-operator’ system triad, that can give a quantitative assessment of how the efficiency of a technological task varies with more comprehensive use of operational capacities of the machine, while lower effect that limiting parameters of production environment and technical condition of the machine have on the operator. The article contains a constructive remote control solution for upgrade of the base machine. It describes the conditions for using the machines with hybrid: manual and remote control at construction sites. There is also an imitation model of operator’s scanning pattern and data experimental research that prove the efficiency of remotely controlled technological operations. The article proves that lower psychological load on the operator and better comfort contribute to positive economic effect and higher quality of the construction process.

  3. Telerobot local-remote control architecture for space flight program applications

    Zimmerman, Wayne; Backes, Paul; Steele, Robert; Long, Mark; Bon, Bruce; Beahan, John


    The JPL Supervisory Telerobotics (STELER) Laboratory has developed and demonstrated a unique local-remote robot control architecture which enables management of intermittent communication bus latencies and delays such as those expected for ground-remote operation of Space Station robotic systems via the Tracking and Data Relay Satellite System (TDRSS) communication platform. The current work at JPL in this area has focused on enhancing the technologies and transferring the control architecture to hardware and software environments which are more compatible with projected ground and space operational environments. At the local site, the operator updates the remote worksite model using stereo video and a model overlay/fitting algorithm which outputs the location and orientation of the object in free space. That information is relayed to the robot User Macro Interface (UMI) to enable programming of the robot control macros. This capability runs on a single Silicon Graphics Inc. machine. The operator can employ either manual teleoperation, shared control, or supervised autonomous control to manipulate the intended object. The remote site controller, called the Modular Telerobot Task Execution System (MOTES), runs in a multi-processor VME environment and performs the task sequencing, task execution, trajectory generation, closed loop force/torque control, task parameter monitoring, and reflex action. This paper describes the new STELER architecture implementation, and also documents the results of the recent autonomous docking task execution using the local site and MOTES.

  4. Hybrid control and acquisition system for remote control systems for environmental monitoring

    Garufi, Fabio; Acernese, Fausto; Boiano, Alfonso; De Rosa, Rosario; Romano, Rocco; Barone, Fabrizio


    In this paper we describe the architecture and the performances of a hybrid modular acquisition and control system prototype for environmental monitoring and geophysics. The system, an alternative to a VME-UDP/IP based system, is based on a dual-channel 18-bit low noise ADC and a 16-bit DAC module at 1 MHz. The module can be configured as stand-alone or mounted on a motherboard as mezzanine. Both the modules and the motherboard can send/receive the configuration and the acquired/correction data for control through a standard EPP parallel port to a standard PC for the real-time computation. The tests have demonstrated that a distributed control systems based on this architecture exhibits a delay time of less than 25 us on a single channel, i.e a sustained sampling frequency of more than 40 kHz (and up to 80 kHz). The system is now under extensive test in the remote controls of seismic sensors (to simulate a geophysics networks of sensors) of a large baseline suspended Michelson interferometer.

  5. Remote ischemic preconditioning in cyanosed neonates undergoing cardiopulmonary bypass: a randomized controlled trial.

    Jones, Bryn O; Pepe, Salvatore; Sheeran, Freya L; Donath, Susan; Hardy, Pollyanna; Shekerdemian, Lara; Penny, Daniel J; McKenzie, Ian; Horton, Stephen; Brizard, Christian P; d'Udekem, Yves; Konstantinov, Igor E; Cheung, Michael M H


    The myocardial protective effect of remote ischemic preconditioning has been demonstrated in heterogeneous groups of patients undergoing cardiac surgery. No studies have examined this technique in neonates. The present study was performed to examine the remote ischemic preconditioning efficacy in this high-risk patient group. A preliminary, randomized, controlled trial was conducted to investigate whether remote ischemic preconditioning in cyanosed neonates undergoing cardiac surgery confers protection against cardiopulmonary bypass. Two groups of neonates undergoing cardiac surgery were recruited for the present study: patients with transposition of the great arteries undergoing the arterial switch procedure and patients with hypoplastic left heart syndrome undergoing the Norwood procedure. The subjects were randomized to the remote ischemic preconditioning or sham control groups. Remote ischemic preconditioning was induced by four 5-minute cycles of lower limb ischemia and reperfusion using a blood pressure cuff. Troponin I and the biomarkers for renal and cerebral injury were measured pre- and postoperatively. A total of 39 neonates were recruited-20 with transposition of the great arteries and 19 with hypoplastic left heart syndrome. Of the 39 neonates, 20 were randomized to remote ischemic preconditioning and 19 to the sham control group. The baseline demographics appeared similar between the randomized groups. The cardiopulmonary bypass and crossclamp times were not significantly different between the 2 groups. The troponin I levels were not significantly different at 6 hours after cardiopulmonary bypass nor were the postoperative inotrope requirements. Markers of renal (neutrophil gelatinase-associated lipocalin) and cerebral injury (S100b, neuron-specific enolase) were not significantly different between the 2 groups. Our data suggest that remote ischemic preconditioning in hypoxic neonates undergoing cardiopulmonary bypass surgery does not provide

  6. Dynamic stabilization methods for bilateral control of remote manipulation

    Handlykken, M.


    This paper discusses and analyses several control strategies for generalized, bilateral master/slave manipulator systems. In these manipulators the two arms have different dynamic/kinematic properties which implies a more difficult control problem. Attention is focused on torque/force driven arms. Required performance for the necessary control computer(s) is discussed.

  7. Design of Novel Online Access and Control Interface for Remote Experiment on DC Drives

    Jagadeesh Chandra A.P


    Full Text Available Internet has revolutionized the way in which the information is delivered. Laboratory based courses play an important role in technical education. Automation is changing the nature of these laboratories and the system designer’s focus on Internet accessed experiments owing to the availability of several tools to integrate electronic and mechanical hardware with the World Wide Web. Stand-alone approaches in remote learning have grown tremendously in the recent years. One of the important components in remote experimentation is the integration of Virtual Instruments to perform real hardware tasks in near real-time. The paper describes a web interface to the electrical hardware and integration of LabVIEW Virtual Instruments to the remote access and control of DC Drives. Customized electrical hardware serves as the web interface, supporting various features to remotely control and measure the parameters of the electrical machine. Novel techniques have been used to interface a low power data acquisition system with the DC machine driven by the AC power supply. The system uses the client-server architecture to access the web page of the Virtual Instruments through web browser. The developed system imitates the real control of experiment hardware, but being operated remotely through Internet.

  8. Improvement of remote control system of automatic ultrasonic equipment for inspection of reactor pressure vessel

    Cheong, Yong Moo; Jung, H. K.; Joo, Y. S.; Koo, K. M.; Hyung, H.; Sim, C. M.; Gong, U. S.; Kim, S. H.; Lee, J. P.; Rhoo, H. C.; Kim, M. S.; Ryoo, S. K.; Choi, C. H.; Oh, K. I


    One of the important issues related to the nuclear safety is in-service inspection of reactor pressure vessel (RPV). A remote controlled automatic ultrasonic method is applied to the inspection. At present the automatic ultrasonic inspection system owned by KAERI is interrupted due to degradation of parts. In order to resume field inspection new remote control system for the equipment was designed and installed to the existing equipment. New ultrasonic sensors and their modules for RPV inspection were designed and fabricated in accordance with the new requirements of the inspection codes. Ultrasonic sensors were verified for the use in the RPV inspection. (autho0008.

  9. Effect of gamma irradiation and its convergent treatment for control of postharvest Botrytis cinerea of cut roses

    Chu, Eun-Hee; Shin, Eun-Jung; Park, Hae-Jun; Jeong, Rae-Dong


    Postharvest diseases cause considerable losses to harvested crops. Among them, gray mold (Botrytis cinerea) is a major problem of exporting to cut rose flowers into Korea. Irradiation treatment is an alternative to phytosanitary purposes and a useful nonchemical approach to the control of postharvest diseases. Gamma irradiation was evaluated for its in vitro and in vivo antifungal activity against B. cinerea on cut rose varieties, 'Shooting Star' and 'Babe'. The irradiating dose required to reduce the population by 90%, D10, was 0.99 kGy. Gamma irradiation showed complete inhibition of spore germination and mycelial growth of B. cinerea, especially 4.0 kGy in vitro. Antifungal activity of gamma irradiation on rose B. cinerea is a dose-dependent manner. A significant phytotoxicity such as bent neck in cut rose quality was shown from gamma irradiation at over 0.4 kGy (pblue mold decay in both varieties. Together, these results suggest that a synergistic effect of the combined treatment with gamma irradiation and NaDCC can be efficiently used to control the postharvest diseases in cut rose flowers, and will provide a promising technology for horticulture products for exportation.

  10. Supervisory autonomous local-remote control system design: Near-term and far-term applications

    Zimmerman, Wayne; Backes, Paul


    The JPL Supervisory Telerobotics Laboratory (STELER) has developed a unique local-remote robot control architecture which enables management of intermittent bus latencies and communication delays such as those expected for ground-remote operation of Space Station robotic systems via the TDRSS communication platform. At the local site, the operator updates the work site world model using stereo video feedback and a model overlay/fitting algorithm which outputs the location and orientation of the object in free space. That information is relayed to the robot User Macro Interface (UMI) to enable programming of the robot control macros. The operator can then employ either manual teleoperation, shared control, or supervised autonomous control to manipulate the object under any degree of time-delay. The remote site performs the closed loop force/torque control, task monitoring, and reflex action. This paper describes the STELER local-remote robot control system, and further describes the near-term planned Space Station applications, along with potential far-term applications such as telescience, autonomous docking, and Lunar/Mars rovers.

  11. Remotely controlled underwater vehicles for inspections; Ferngesteuerte Unterwasserfahrzeuge fuer Inspektionen

    Haferkamp, H.; Bach, F.W.; Reinhardt, U.; Bachmann, M. [Hannover Univ. (Germany). Inst. fuer Werkstoffkunde


    Since the seventies, unmanned remotely operated underwater vehicles have been used increasingly be offshore industries for inspection and maintenance of platforms and pipelines. The range of potential uses became wider, and the wish arose to adapt these vehicles to various different applications. For some of the commercially operated vehicles, manufacturers offer, e.g., MasterSlave manipulator arms or Sonar sensors as optional extras. On the other hand, the universally applicable modular ROV has not so far grown beyond the conceptual design stage. As ROVs are employed especially in locations where extreme environmental conditions make the work of divers uneconomical small inspection vehicles have been employed also in the flooded sections of nuclear installations. In the light of the conditions prevailing in that environment, some existing vehicles were scaled down and equipped with radiation-resistant underwater cameras. The Institute for Materials Studies of the University of Hanover developed small ROVs specifically for use in nuclear facilities, with these boundary conditions being taken into consideration: Failsafe characteristics; design allowing easy decontamination; small dimensions; high mobility for precise maneuvers in constricted spaces; low water depths not exceeding 30 m; short tooling times; reliable retrievability of the vehicle. (orig./RHM) [Deutsch] Unbemannte, fernbediente Unterwasserfahrzeuge werden seit den siebziger Jahren in wachsendem Masse in der Offshore-Industrie bei der Inspektion und Wartung von Plattformen und Pipelines eingesetzt. Da ROVs insbesondere dort eingesetzt werden, wo der Einsatz von Tauchern aufgrund der extremen Umgebungsbedingungen unwirtschaftlich ist, fanden kleinbauende Inspektionsfahrzeuge den Weg in die gefluteten Sektionen kerntechnischer Anlagen. Auf Grund der hier vorherrschenden Situation wurden z.T. bestehende Fahrzeugkonzepte verkleinert und mit strahlenresistenten Unterwasserkameras versehen. Am Institut fuer

  12. Asymmetric Controlled Bidirectional Remote State Preparation by Using a Ten-qubit Entangled State

    Ma, Peng-Cheng; Chen, Gui-Bin; Li, Xiao-Wei; Zhang, Jian; Zhan, You-Bang


    We present a novel scheme for asymmetric controlled bidirectional remote state preparation (ACBRSP) with complex coefficients via a ten-qubit entangled state as the quantum channel. In this scheme, two distant parties, Alice and Bob are not only senders but also receivers, and Alice wants to remotely prepare a single-qubit state at Bob's site, at the same time, Bob wishes to help Alice remotely prepares an arbitrary two-qubit entangled state. It is shown that, only if the two senders and the controller collaborate with each other, the ACBRSP can be completed successfully. We demonstrate that the total success probability of the ACBRSP in this scheme can reach 1, that is, the scheme is deterministic.

  13. Design of the cutting head position detection and control system of Laser cutting machine%激光切割机切割头位置检测与调高控制系统设计



    在激光切割中为了有敢控制激光焦点与工件之间的相对位置,设计了激光切割头自动调高系统的位置检测系统。采用切割喷嘴和切割极板形成的电容构成差动式电桥,以差动式电桥作为测距传感器;用相敏检波电路鉴别切割喷嘴和切割板材间位置变化,伺服系统控制切割头运动,从而实现激光切割头高度调节。通过测试,有效地解决了激光切割焦点跟踪问题,提高了系统的控制品质。所设计的切割头位置检测为激光切割机提供了解决方案。%In order to control effectively the opposite position between the laser focus and the workpiece during laser beam cutting, the position examination system of the laser cutting head automatic distance control system has been designed. To adopt the electric capacity of the cutting nozzle and the cutting workpiece constitutes the differential type electricity bridge, it is used as distance sensor. The phase- sensitive detection electric circuit is used to discriminate the position change between the cutting nozzle and the workpiece, the sorvo system controles cutting head movement, the high regulate for the laser cutting head was implemented. Pass a test, availably solve laser to incise a focus to follow a problem, raised the control quality of system. The position detection system to be designed provide a solution for laser cutting.

  14. The Use of a Brain Computer Interface Remote Control to Navigate a Recreational Device

    Shih Chung Chen


    Full Text Available People suffering from paralysis caused by serious neural disorder or spinal cord injury also need to be given a means of recreation other than general living aids. Although there have been a proliferation of brain computer interface (BCI applications, developments for recreational activities are scarcely seen. The objective of this study is to develop a BCI-based remote control integrated with commercial devices such as the remote controlled Air Swimmer. The brain is visually stimulated using boxes flickering at preprogrammed frequencies to activate a brain response. After acquiring and processing these brain signals, the frequency of the resulting peak, which corresponds to the user’s selection, is determined by a decision model. Consequently, a command signal is sent from the computer to the wireless remote controller via a data acquisition (DAQ module. A command selection training (CST and simulated path test (SPT were conducted by 12 subjects using the BCI control system and the experimental results showed a recognition accuracy rate of 89.51% and 92.31% for the CST and SPT, respectively. The fastest information transfer rate demonstrated a response of 105 bits/min and 41.79 bits/min for the CST and SPT, respectively. The BCI system was proven to be able to provide a fast and accurate response for a remote controller application.

  15. Infrared Remote-control Mouse's Design%红外线遥控鼠标设计



    Infrared remote-control now is the using widest method of remote-control. The remote-control equipment is small sized; low energy consumption, powerful. Based on these advantages, I designed a kind of infrared remote-control mouse ; It uses infrared ray to replace the link line between mouse and computer, and uses button to control the movement of the cursor. It's so easy to use that we need not put mouse on the desktop (mouse pad)%红外线遥控是目前使用最广泛的一种遥控手段,红外遥控装置具有体积小,功耗微,功能强,成本低的特点,基于这种优点,设计一种红外遥控鼠标器,用红外线取代鼠标器和计算机之间的连线,用按键控制.

  16. Field Experiments using Telepresence and Virtual Reality to Control Remote Vehicles: Application to Mars Rover Missions

    Stoker, Carol


    This paper will describe a series of field experiments to develop and demonstrate file use of Telepresence and Virtual Reality systems for controlling rover vehicles on planetary surfaces. In 1993, NASA Ames deployed a Telepresence-Controlled Remotely Operated underwater Vehicle (TROV) into an ice-covered sea environment in Antarctica. The goal of the mission was to perform scientific exploration of an unknown environment using a remote vehicle with telepresence and virtual reality as a user interface. The vehicle was operated both locally, from above a dive hole in the ice through which it was launched, and remotely over a satellite communications link from a control room at NASA's Ames Research center, for over two months. Remote control used a bidirectional Internet link to the vehicle control computer. The operator viewed live stereo video from the TROV along with a computer-gene rated graphic representation of the underwater terrain showing file vehicle state and other related information. Tile actual vehicle could be driven either from within the virtual environment or through a telepresence interface. In March 1994, a second field experiment was performed in which [lie remote control system developed for the Antarctic TROV mission was used to control the Russian Marsokhod Rover, an advanced planetary surface rover intended for launch in 1998. Marsokhod consists of a 6-wheel chassis and is capable of traversing several kilometers of terrain each day, The rover can be controlled remotely, but is also capable of performing autonomous traverses. The rover was outfitted with a manipulator arm capable of deploying a small instrument, collecting soil samples, etc. The Marsokhod rover was deployed at Amboy Crater in the Mojave desert, a Mars analog site, and controlled remotely from Los Angeles. in two operating modes: (1) a Mars rover mission simulation with long time delay and (2) a Lunar rover mission simulation with live action video. A team of planetary

  17. Light-Activated Ion Channels for Remote Control of Neural Activity

    Chambers, James J.; Richard H Kramer


    Light-activated ion channels provide a new opportunity to precisely and remotely control neuronal activity for experimental applications in neurobiology. In the past few years, several strategies have arisen that allow light to control ion channels and therefore neuronal function. Light-based triggers for ion channel control include caged compounds, which release active neurotransmitters when photolyzed with light, and natural photoreceptive proteins, which can be expressed exogenously in neu...

  18. A simple optical fibre-linked remote control system for multiple devices

    M A Sumesh; Boby Joseph; D P Mahapatra


    We report on the development of a simple control system which can handle multiple devices through an optical fibre data link. The devices are controlled using a set of DACs through serial data communication via a serial port of a PC. Serial data from the PC get converted to parallel mode using a homemade “serial in parallel out” (SIPO) device at the remote end. The functioning of this to control multiple devices is presented and discussed.

  19. Remote Control of T Cell Activation Using Magnetic Janus Particles.

    Lee, Kwahun; Yi, Yi; Yu, Yan


    We report a strategy for using magnetic Janus microparticles to control the stimulation of T cell signaling with single-cell precision. To achieve this, we designed Janus particles that are magnetically responsive on one hemisphere and stimulatory to T cells on the other side. By manipulating the rotation and locomotion of Janus particles under an external magnetic field, we could control the orientation of the particle-cell recognition and thereby the initiation of T cell activation. This study demonstrates a step towards employing anisotropic material properties of Janus particles to control single-cell activities without the need of complex magnetic manipulation devices.

  20. Remote guidance of untrained turtles by controlling voluntary instinct behavior.

    Serin Lee

    Full Text Available Recently, several studies have been carried out on the direct control of behavior in insects and other lower animals in order to apply these behaviors to the performance of specialized tasks in an attempt to find more efficient means of carrying out these tasks than artificial intelligence agents. While most of the current methods cause involuntary behavior in animals by electronically stimulating the corresponding brain area or muscle, we show that, in turtles, it is also possible to control certain types of behavior, such as movement trajectory, by evoking an appropriate voluntary instinctive behavior. We have found that causing a particular behavior, such as obstacle avoidance, by providing a specific visual stimulus results in effective control of the turtle's movement. We propose that this principle may be adapted and expanded into a general framework to control any animal behavior as an alternative to robotic probes.

  1. Operational facilities of remote control software of ranging measurement equipment

    Becceneri, Jose Carlos

    The basic purpose of this paper is to document, in this symposium, the work performed for the construction of Ranging Management Software (RAN), which is one of the functions of the Satellite Control System (SICS) software developed by Instituto Nacional de Pesquisas Espaciais (INPE) to control the Brazilian satellites of MECB (Brazilian Complete Space Mission). This paper shows the RAN basic architecture as well as a set of functions which facilitates both the operation and the ranging system test.

  2. Control and stability problems of remote orbital capture

    Kaplan, M. H.; Nadkarni, A. A.


    Certain space shuttle missions may require retrieval of passive spinning and precessing satellites. One proposed means of retrieval utilizes a free-flying teleoperator launched from the shuttle. A study of misalignment, stability, and certain control aspects during capture of an object is reported here. The approach used is to model the dynamics by a Lagrangian formulation and apply torque components to dissipate motion. Differential angular rates between teleoperator and object are assumed, and control responses after capture are reviewed.

  3. Hyperspectral remote sensing analysis of short rotation woody crops grown with controlled nutrient and irrigation treatments

    Jungho Im; John R. Jensen; Mark Coleman; Eric. Nelson


    Hyperspectral remote sensing research was conducted to document the biophysical and biochemical characteristics of controlled forest plots subjected to various nutrient and irrigation treatments. The experimental plots were located on the Savannah River Site near Aiken, SC. AISA hyperspectral imagery were analysed using three approaches, including: (1) normalized...


    Mohammad Khairuddin


    Full Text Available Makalah ini membahas kendali jarak jauh intensitas cahaya piranti penerangan ruang (PPR secara efisien menggunakan short message service (SMS berbasis remote control. Dengan sistem kendali berbasis SMS sebagai remote control maka semua PPR dapat dikendalikan dari manapun di seluruh penjuru tanah air dengan syarat tempat tersebut terjangkau oleh sinyal telekomunikasi yang disediakan oleh provider. Sistem ini didesain untuk memenuhi arahan hemat energi oleh Kementerian Energi dan Pertambangan. Sistem kendali intensitas cahaya PPR menggunakan SMS berbasis remote control ini sebagai terobosan sistem saklar manual yang selama ini dibatasi oleh ruang secara fisik. Kemudahan penggunaan handphone (HP telah menjadi peluang bagi sistem saklar PPR. Didukung dengan semakin murahnya biaya berkomunikasi melalui SMS. Peluang ini mendukung kemudahan pengguna HP dengan menambah fitur sistem kendali intensitas cahaya PPR menggunakan SMS berbasis remote control. Sistem kendali jarak jauh menggunakan server modem wavecom fastrack supreme. Sistem ini menggunakan prosesor ATmega8 dengan interfacing menggunakan RS232. Hasil eksperimen menunjukan bahwa tidak ada perbedaan waktu terhadap variabel jarak posisi PPR dengan HP pengirim SMS selaku comander untuk eksekusi pengaturan intensitas cahaya. Dengan rerata waktu jeda 4,38 detik. Semakin besar prosentase sudut pemicuan TRIAC maka akan semakin besar nilai intensitas cahaya. Tidak ada perbedaan signifikan terhadap lama waktu hasil eksekusi terhadap variasi provider yang digunakan.

  5. Ca2+-mediated remote control of reversible sieve tube occlusion in Vicia faba

    Furch, Alexandra C.U.; Hafke, Jens B.; Schulz, Alexander


    . The data are consistent with a remote-controlled occlusion of sieve plates depending on the longitudinal propagation of an EPW releasing Ca2+ into the sieve element lumen. It is hypothesized that forisome plugs and callose constriction are removed once the cytosolic calcium level has returned...

  6. Remote supramolecular control of catalyst selectivity in the hydroformylation of alkenes

    Dydio, P.; Dzik, W.I.; Lutz, M.; de Bruin, B.; Reek, J.N.H.


    The supramolecular interactions between a Rh phosphine catalyst equipped with an anion-binding pocket and alkenes that contain anionic functionalities (see picture) provide an excellent design concept to achieve remote control of the regioselectivity in hydroformylation reactions. The 4-pentenoate

  7. Remote control and navigation tests for application to long-range lunar surface exploration

    Mastin, W. C.; White, P. R.; Vinz, F. L.


    Tests conducted with a vehicle system built at the Marshall Space Flight Center to investigate some of the unknown factors associated with remote controlled teleoperated vehicles on the lunar surface are described. Test data are summarized and conclusions are drawn from these data which indicate that futher testing will be required.

  8. Cryopreservation of precision-cut rat liver slices using a computer-controlled freezer

    Maas, W.J.M.; Leeman, W.R.; Groten, J.P.; Sandt, J.J.M. van de


    Precision-cut liver slices are frequently used to study hepatic toxicity and metabolism of xenobiotics in vitro. Successful cryopreservation techniques will enhance an efficient and economic use of scarcely available (human) liver tissue. For primary hepatocytes, slow freezing has been accepted as

  9. Laser vs bur for bone cutting in impacted mandibular third molar surgery: A randomized controlled trial.

    Passi, Deepak; Pal, Uma Shankar; Mohammad, Shadab; Singh, Rakesh Kumar; Mehrotra, Divya; Singh, Geeta; Kumar, Manoj; Chellappa, Arul A L; Gupta, Chandan


    The aim of this study was to assess the feasibility of Er: YAG laser in bone cutting for removal of impacted lower third molar teeth and compare its outcomes with that of surgical bur. The study comprised 40 subjects requiring removal of impacted mandibular third molar, randomly categorized into two equal groups of 20 each, who had their impacted third molar removed either using Er: YAG laser or surgical bur as per their group, using standard methodology of extraction of impacted teeth. Clinical parameters like pain, bleeding, time taken for bone cutting, postoperative swelling, trismus, wound healing and complications were compared for both groups. Clinical parameters like pain, bleeding and swelling were lower in laser group than bur group, although the difference was statistically not significant. However, postoperative swelling showed significant difference in the two groups. Laser group required almost double the time taken for bone cutting with bur. Trismus persisted for a longer period in laser group. Wound healing and complications were assessed clinically and there was no significant difference in both the groups. Based on the results of our study, the possibility of bone cutting using lasers is pursued, the osteotomy is easily performed and the technique is better suited to minimally invasive surgical procedures. The use of Er: YAG laser may be considered as an alternative tool to surgical bur, specially in anxious patients.

  10. Cutting propagation of azaleas using hot water treatments to control pathogens

    Azalea web blight, caused by certain binucleate species of Rhizoctonia, occurs yearly on some azalea cultivars during nursery production in the southern and eastern U.S. Azalea shoots collected for cutting propagation can harbor the pathogen, thus allowing the disease to be perpetuated during the cu...

  11. Cryopreservation of precision-cut rat liver slices using a computer-controlled freezer

    Maas, W.J.M.; Leeman, W.R.; Groten, J.P.; Sandt, J.J.M. van de


    Precision-cut liver slices are frequently used to study hepatic toxicity and metabolism of xenobiotics in vitro. Successful cryopreservation techniques will enhance an efficient and economic use of scarcely available (human) liver tissue. For primary hepatocytes, slow freezing has been accepted as t

  12. Optical switches for remote and noninvasive control of cell signaling.

    Gorostiza, Pau; Isacoff, Ehud Y


    Although the identity and interactions of signaling proteins have been studied in great detail, the complexity of signaling networks cannot be fully understood without elucidating the timing and location of activity of individual proteins. To do this, one needs a means for detecting and controlling specific signaling events. An attractive approach is to use light, both to report on and control signaling proteins in cells, because light can probe cells in real time with minimal damage. Although optical detection of signaling events has been successful for some time, the development of the means for optical control has accelerated only recently. Of particular interest is the development of chemically engineered proteins that are directly sensitive to light.


    Tímea VAS


    Full Text Available The concept of remote and mobile Air Traffic Control Tower (ATC TWR and its development has started in Europe, Australia and also in the USA, in order to improve the efficiency of Air Traffic Management (ATM systems in terms of air transportation safety. These new technologies are applicable in many countries in peace time, but on mobility reasons these are promoted to achieve commitments in the operational area. This article describes the devices and range of equipment of mobile and remote tower, and their specifications, which can even serve a medium sized airport, furthermore examines, whether how can those provide the air traffic services at an operational airfield.

  14. Remote Multivariable Control Design Using a Competition Game

    Atanasijevic-Kunc, M.; Logar, V.; Karba, R.; Papic, M.; Kos, A.


    In this paper, some approaches to teaching multivariable control design are discussed, with special attention being devoted to a step-by-step transition to e-learning. The approach put into practice and presented here is developed through design projects, from which one is chosen as a competition game and is realized using the E-CHO system,…

  15. Recent developments in the remote radio control of insect flight.

    Sato, Hirotaka; Maharbiz, Michel M


    The continuing miniaturization of digital circuits and the development of low power radio systems coupled with continuing studies into the neurophysiology and dynamics of insect flight are enabling a new class of implantable interfaces capable of controlling insects in free flight for extended periods. We provide context for these developments, review the state-of-the-art and discuss future directions in this field.

  16. The robotic and remotely controlled telescope at the University of Athens Observatory

    Gazeas, K.


    A fully automatic remote telescope and dome control system has been installed at the University of Athens Observatory (UOAO) in August 2012. It was constructed in the Laboratory of Astronomy and Applied Optics of the department and incorporated the already existing automation for observations and data gathering techniques. The system proved to be reliable and functions faultlessly up to date, enabling the astronomers to observe remotely from any place, using the network. The observing nights have been increased significantly after the first year of remote operation, reaching the number of 280 observing nights per year (77% annual usage), half of which are characterized as photometric nights of highest quality. This utility favours long-term monitoring projects of blazars and long periodic variables in general.

  17. Technical Update: Johnson Space Center system using a solid electrolytic cell in a remote location to measure oxygen fugacities in CO/CO2 controlled-atmosphere furnaces

    Jurewicz, A. J. G.; Williams, R. J.; Le, L.; Wagstaff, J.; Lofgren, G.; Lanier, A.; Carter, W.; Roshko, A.


    Details are given for the design and application of a (one atmosphere) redox-control system. This system differs from that given in NASA Technical Memorandum 58234 in that it uses a single solid-electrolytic cell in a remote location to measure the oxygen fugacities of multiple CO/CO2 controlled-atmosphere furnaces. This remote measurement extends the range of sample-furnace conditions that can be measured using a solid-electrolytic cell, and cuts costs by extending the life of the sensors and by minimizing the number of sensors in use. The system consists of a reference furnace and an exhaust-gas manifold. The reference furnace is designed according to the redox control system of NASA Technical Memorandum 58234, and any number of CO/CO2 controlled-atmosphere furnaces can be attached to the exhaust-gas manifold. Using the manifold, the exhaust gas from individual CO/CO2 controlled atmosphere furnaces can be diverted through the reference furnace, where a solid-electrolyte cell is used to read the ambient oxygen fugacity. The oxygen fugacity measured in the reference furnace can then be used to calculate the oxygen fugacity in the individual CO/CO2 controlled-atmosphere furnace. A BASIC computer program was developed to expedite this calculation.

  18. Advance of Study on Design Methods of Hydraulic System of Radio Remote Control of Construction Machinery

    FENG Kai-lin; YANG Wei-min; CHEN kang-ning


    The working principle of radio remote controlling of construction machinery should be that signals of the radio wave from the transmitter obtained in the receiver were controlled and then changed into electronic analog or digital signals which can be used to drive different actuators and mechanisms of the vehicle.The vehicle could be acted by following the controlling instructions sent by the operator.The best operation mode of construction machinery is suitable not only to manual operating but also to remote controlling in the same vehicle.The design methods of the hydraulic system used for the radio remote controlling of construction machinery are discussed.The design methods of hydraulic circuits for the actuators controlled by solenoid on-off type valves,hydro-electronic multi-way proportional valves,closed loop proportional servo driver or three-way proportional reducing valves are discussed in detail (with real example).The design methods of the power shift transmission of electro-hydraulic controlling,the devices of braking and the directional streering are discussed in this paper.

  19. Trigger release liposome systems: local and remote controlled delivery?

    Bibi, Sagida; Lattmann, E; Mohammed, Afzal R; Perrie, Yvonne


    Target-specific delivery has become an integral area of research in order to increase bioavailability and reduce the toxic effects of drugs. As a drug-delivery option, trigger-release liposomes offer sophisticated targeting and greater control-release capabilities. These are broadly divided into two categories; those that utilise the local environment of the target site where there may be an upregulation in certain enzymes or a change in pH and those liposomes that are triggered by an external physical stimulus such as heat, ultrasound or light. These release mechanisms offer a greater degree of control over when and where the drug is released; furthermore, targeting of diseased tissue is enhanced by incorporation of target-specific components such as antibodies. This review aims to show the development of such trigger release liposome systems and the current research in this field.

  20. Remote Control for Robotic Systems Using CORBA as Communication Architecture


    This paper proposes a novel method to implement network connections among a client and remoterobotic systems using CORBA for developing telecare system to aid the aged or disabled. The proposed methodmakes system have low cost and wide availability, high scaling and inter-operating ability to allow the clients andserver objects, written in different languages, run in different operating system, and connected in different net-work to inter-operate. It also makes system easy to be extended and integrated with the other technologies andapplications distributed over the Internet. Using CORBA as a communication architecture, we developed hard-ware base, task-level robot arm control server, live image feedback server and mobile robot control server,which can provide some basic care services to aid the aged and disabled.

  1. Remote control of the industry processes. POWERLINK protocol application

    Wóbel, A.; Paruzel, D.; Paszkiewicz, B.


    The present technological development enables the use of solutions characterized by a lower failure rate, and work with greater precision. This allows you to obtain the most efficient production, high speed production and reliability of individual components. The main scope of this article was POWERLINK protocol application for communication with the controller B & R through communication Ethernet for recording process parameters. This enables control of run production cycle using an internal network connected to the PC industry. Knowledge of the most important parameters of the production in real time allows detecting of a failure immediately after occurrence. For this purpose, the position of diagnostic use driver X20CP1301 B&R to record measurement data such as pressure, temperature valve between the parties and the torque required to change the valve setting was made. The use of POWERLINK protocol allows for the transmission of information on the status of every 200 μs.

  2. Remote Controlled CARs: Towards a Safer Therapy for Leukemia.

    June, Carl H


    Genetic engineering of patient T cells with chimeric antigen receptors (CAR T cells) provides a powerful tool for inducing remissions in patients with various cancers derived from B cells. Challenges stemming from the inability to control the CAR T cells once given pose significant safety concerns. An article in Cancer Immunology Research presents an approach to circumvent this issue. Cancer Immunol Res; 4(8); 643. ©2016 AACRSee article by Sakemura et al., p. 658.

  3. Adaptive guidance and control for future remote sensing systems

    Lowrie, J. W.; Myers, J. E.


    A unique approach to onboard processing was developed that is capable of acquiring high quality image data for users in near real time. The approach is divided into two steps: the development of an onboard cloud detection system; and the development of a landmark tracker. The results of these two developments are outlined and the requirements of an operational guidance and control system capable of providing continuous estimation of the sensor boresight position are summarized.

  4. Recent Developments in the Remote Radio Control of Insect Flight

    Hirotaka eSato


    Full Text Available The continuing miniaturization of digital circuits and the development of low power radio systems coupled with continuing studies into the neurophysiology and dynamics of insect flight are enabling a new class of implantable interfaces capable of controlling insects in free flight for extended periods. We provide context for these developments, review the state-of-the-art and discuss future directions in this field.

  5. Comparison of Human Pilot (Remote Control Systems in Multirotor Unmanned Aerial Vehicle Navigation

    Zainal Rasyid Mahayuddin


    Full Text Available This paper concerns about the human pilot or remote control system in UAV navigation. Demands for Unmanned Aerial Vehicle (UAV are increasing tremendously in aviation industry and research area. UAV is a flying machine that can fly with no pilot onboard and can be controlled by ground-based operators. In this paper, a comparison was made between different proposed remote control systems and devices to navigate multirotor UAV, like hand-controllers, gestures and body postures techniques, and vision-based techniques. The overall reviews discussed in this paper have been studied in various research sources related to UAV and its navigation system. Every method has its pros and cons depends on the situation. At the end of the study, those methods will be analyzed and the best method will be chosen in term of accuracy and efficiency.

  6. Novel Networked Remote Laboratory Architecture for Open Connectivity Based on PLC-OPC-LabVIEW-EJS Integration. Application in Remote Fuzzy Control and Sensors Data Acquisition

    Isaías González


    Full Text Available In this paper the design and implementation of a network for integrating Programmable Logic Controllers (PLC, the Object-Linking and Embedding for Process Control protocol (OPC and the open-source Easy Java Simulations (EJS package is presented. A LabVIEW interface and the Java-Internet-LabVIEW (JIL server complete the scheme for data exchange. This configuration allows the user to remotely interact with the PLC. Such integration can be considered a novelty in scientific literature for remote control and sensor data acquisition of industrial plants. An experimental application devoted to remote laboratories is developed to demonstrate the feasibility and benefits of the proposed approach. The experiment to be conducted is the parameterization and supervision of a fuzzy controller of a DC servomotor. The graphical user interface has been developed with EJS and the fuzzy control is carried out by our own PLC. In fact, the distinctive features of the proposed novel network application are the integration of the OPC protocol to share information with the PLC and the application under control. The user can perform the tuning of the controller parameters online and observe in real time the effect on the servomotor behavior. The target group is engineering remote users, specifically in control- and automation-related tasks. The proposed architecture system is described and experimental results are presented.

  7. Novel Networked Remote Laboratory Architecture for Open Connectivity Based on PLC-OPC-LabVIEW-EJS Integration. Application in Remote Fuzzy Control and Sensors Data Acquisition.

    González, Isaías; Calderón, Antonio José; Mejías, Andrés; Andújar, José Manuel


    In this paper the design and implementation of a network for integrating Programmable Logic Controllers (PLC), the Object-Linking and Embedding for Process Control protocol (OPC) and the open-source Easy Java Simulations (EJS) package is presented. A LabVIEW interface and the Java-Internet-LabVIEW (JIL) server complete the scheme for data exchange. This configuration allows the user to remotely interact with the PLC. Such integration can be considered a novelty in scientific literature for remote control and sensor data acquisition of industrial plants. An experimental application devoted to remote laboratories is developed to demonstrate the feasibility and benefits of the proposed approach. The experiment to be conducted is the parameterization and supervision of a fuzzy controller of a DC servomotor. The graphical user interface has been developed with EJS and the fuzzy control is carried out by our own PLC. In fact, the distinctive features of the proposed novel network application are the integration of the OPC protocol to share information with the PLC and the application under control. The user can perform the tuning of the controller parameters online and observe in real time the effect on the servomotor behavior. The target group is engineering remote users, specifically in control- and automation-related tasks. The proposed architecture system is described and experimental results are presented.

  8. The impact of remote manipulator structural dynamics on Shuttle on-orbit flight control

    Sargent, D. G.


    The performance of the Space Shuttle on-orbit flight control system during payload operations with the remote manipulator system is described. The changing mass and inertia distribution associated with payload manipulation can have a significant effect on the control authority provided by the orbiter's reaction control jets. Commanded payload motion and jet firings can excite significant flexure in the orbiter/manipulator/payload structure. These effects combine to stress the control capabilities of the flight control system. Data from recent flight tests is presented to illustrate these effects.

  9. Assisting Children with Attention Deficit Hyperactivity Disorder Actively Reduces Limb Hyperactive Behavior with a Nintendo Wii Remote Controller through Controlling Environmental Stimulation

    Shih, Ching-Hsiang; Yeh, Jui-Chi; Shih, Ching-Tien; Chang, Man-Ling


    The latest studies have adopted software technology which turns the Wii Remote Controller into a high-performance limb action detector, we assessed whether two persons with multiple disabilities would be able to control an environmental stimulus through limb action. This study extends the functionality of the Wii Remote Controller to the…

  10. A Limb Action Detector Enabling People with Multiple Disabilities to Control Environmental Stimulation through Limb Action with a Nintendo Wii Remote Controller

    Shih, Ching-Hsiang; Chang, Man-Ling; Shih, Ching-Tien


    This study assessed whether two persons with multiple disabilities would be able to control environmental stimulation using limb action with a Nintendo Wii Remote Controller and a newly developed limb action detection program (LADP, i.e., a new software program that turns a Wii Remote Controller into a precise limb action detector). This study was…

  11. Assisting Children with Attention Deficit Hyperactivity Disorder Actively Reduces Limb Hyperactive Behavior with a Nintendo Wii Remote Controller through Controlling Environmental Stimulation

    Shih, Ching-Hsiang; Yeh, Jui-Chi; Shih, Ching-Tien; Chang, Man-Ling


    The latest studies have adopted software technology which turns the Wii Remote Controller into a high-performance limb action detector, we assessed whether two persons with multiple disabilities would be able to control an environmental stimulus through limb action. This study extends the functionality of the Wii Remote Controller to the…

  12. Identifying Supervisory Control and Data Acquisition (SCADA) Systems on a Network via Remote Reconnaissance


    of the OSI networking framework, charged with routing of communications between localized networks. ISA Instrumentation, Systems, and Automation...Profibus) for use on a TCP/IP network. RTU Remote Terminal Unit – An electronic device where input and output from sensors and actuators are aggregated...Units ( RTUs ) • Human Machine Interfaces (HMIs) • Control Networks. Other research has delimited control systems in differing ways.9 Generally

  13. Telecommunications networks, home integrated systems and remote control applications; Reseaux de telecommunications, domotique et teleaction

    Cregut, F.; Treheux, M.


    Energy savings in residential sector can be performed by home integrated control systems. Remote controlled interfaces allow electric appliances consumption matching effective needs. Nevertheless, the uses of those techniques are stagnating since several years. The first reason is an awkward human factors engineering, that is now improving. The second reason is an lack of definition of the needs, that lead to commercialization problems. (D.L.)

  14. Turning a remotely controllable observatory into a fully autonomous system

    Swindell, Scott; Johnson, Chris; Gabor, Paul; Zareba, Grzegorz; Kubánek, Petr; Prouza, Michael


    We describe a complex process needed to turn an existing, old, operational observatory - The Steward Observatory's 61" Kuiper Telescope - into a fully autonomous system, which observers without an observer. For this purpose, we employed RTS2,1 an open sourced, Linux based observatory control system, together with other open sourced programs and tools (GNU compilers, Python language for scripting, JQuery UI for Web user interface). This presentation provides a guide with time estimates needed for a newcomers to the field to handle such challenging tasks, as fully autonomous observatory operations.

  15. 纸板切割机的控制分析%Control Analysis of Single Cutting Device



    在蜂窝纸板加工生产线中,存在着切纸机设备落后、自动化程度低的现状,为此基于气控原理和仿真技术,设计了一种新型切纸机的气动控制系统.先在ADAMS软件中模拟切割机的工作过程,以优化其结构和运行模式,再在FluidSIM-P软件中设计切割机的气动回路和电气回路来提高工作效率和自动化程度.目前该系统已川于生产线上,对纸板切割机进行了有效控制.%The current paperboard production has outdated facilities and a low degree of automation. As a result, a new pneumatic control technology of single cutting device is developed based on pneumatic theory and simulation technology. First, the working process of single cutting device was simulated in the software of MSC.Adams to optimize the structure and mode of motion Second, its pneumatic and electric loop had been designed in the software of FluidSIM-P to improve working efficiency and automation. Now the device is used and effectively controlled in the cutting of paperboard.

  16. Remote controlled bio-stimulator and animal behavior analysis system

    Song, Weiguo; Yuan, Kui; Han, Taizhen; Chai, Jie


    This paper presents a surveillance and stimulation system to study the animal locomotion behavior under electrical micro-stimulations in the brain nerve, which provides a new platform and methodology for behavior experiment in neural science. The system consists of two parts: 1) micro-control based multi-channel stimulator backed by animal; 2) Computer vision based animal behavior tracking system; The performance of the micro-stimulator is validated for sciatic nerve of frog and the results show that it is reliable, stabile, compact (25×35×10 mm), light (20g with cell). The tracking speed and accuracy is improved with our new hybrid tracking algorithm based on color table looking and moving predication, and compared with the manual recording. The preliminary results of rat tracking show that it works accurately and robustly in real-time even under interference condition.

  17. Remote Monitoring and Controlling of a Material Science Experiment

    Wattanapong KURDTHONGMEE


    Full Text Available The computer industry’s remarkable ability to integrate more transistors into a small area of silicon is increasing the intelligence of our devices and simultaneously decreasing their cost and power consumption. In addition, the proliferation of wired and wireless networking spurred by the development of the world-wide web and demands for mobile access are enabling low-cost connectivity among computing devices. It is now possible to connect every computing device into a true world-wide web that connects the physical world of sensors and actuators to the virtual world of our information utilities and services. This paper examines an application of an integration of the intelligent chip with the network connectivity into a material science experiment designed to study the sorption of woods. The intelligence and network connectivity infrastructures of the system eliminate laborious tasks previously required during experiment control and data collection processes.

  18. Effects of image orientation and ground control points distribution on unmanned aerial vehicle photogrammetry projects on a road cut slope

    Carvajal-Ramírez, Fernando; Agüera-Vega, Francisco; Martínez-Carricondo, Patricio J.


    The morphology of road cut slopes, such as length and high slopes, is one of the most prevalent causes of landslides and terrain stability troubles. Digital elevation models (DEMs) and orthoimages are used for land management purposes. Two flights with different orientations with respect to the target surface were planned, and four photogrammetric projects were carried out during these flights to study the image orientation effects. Orthogonal images oriented to the cut slope with only sidelaps were compared to the classical vertical orientation, with sidelapping, endlapping, and both types of overlapping simultaneously. DEM and orthoimages obtained from the orthogonal project showed smaller errors than those obtained from the other three photogrammetric projects, with the first one being much easier to manage. One additional flight and six photogrammetric projects were used to establish an objective criterion to locate the three ground control points for georeferencing and rectification DEMs and orthoimages. All possible sources of errors were evaluated in the DEMs and orthoimages.

  19. From Antarctica to space: Use of telepresence and virtual reality in control of remote vehicles

    Stoker, Carol; Hine, Butler P., III; Sims, Michael; Rasmussen, Daryl; Hontalas, Phil; Fong, Terrence W.; Steele, Jay; Barch, Don; Andersen, Dale; Miles, Eric


    In the Fall of 1993, NASA Ames deployed a modified Phantom S2 Remotely-Operated underwater Vehicle (ROV) into an ice-covered sea environment near McMurdo Science Station, Antarctica. This deployment was part of the antarctic Space Analog Program, a joint program between NASA and the National Science Foundation to demonstrate technologies relevant for space exploration in realistic field setting in the Antarctic. The goal of the mission was to operationally test the use of telepresence and virtual reality technology in the operator interface to a remote vehicle, while performing a benthic ecology study. The vehicle was operated both locally, from above a dive hole in the ice through which it was launched, and remotely over a satellite communications link from a control room at NASA's Ames Research Center. Local control of the vehicle was accomplished using the standard Phantom control box containing joysticks and switches, with the operator viewing stereo video camera images on a stereo display monitor. Remote control of the vehicle over the satellite link was accomplished using the Virtual Environment Vehicle Interface (VEVI) control software developed at NASA Ames. The remote operator interface included either a stereo display monitor similar to that used locally or a stereo head-mounted head-tracked display. The compressed video signal from the vehicle was transmitted to NASA Ames over a 768 Kbps satellite channel. Another channel was used to provide a bi-directional Internet link to the vehicle control computer through which the command and telemetry signals traveled, along with a bi-directional telephone service. In addition to the live stereo video from the satellite link, the operator could view a computer-generated graphic representation of the underwater terrain, modeled from the vehicle's sensors. The virtual environment contained an animate graphic model of the vehicle which reflected the state of the actual vehicle, along with ancillary information such

  20. From Antarctica to space: Use of telepresence and virtual reality in control of remote vehicles

    Stoker, Carol; Hine, Butler P., III; Sims, Michael; Rasmussen, Daryl; Hontalas, Phil; Fong, Terrence W.; Steele, Jay; Barch, Don; Andersen, Dale; Miles, Eric


    In the Fall of 1993, NASA Ames deployed a modified Phantom S2 Remotely-Operated underwater Vehicle (ROV) into an ice-covered sea environment near McMurdo Science Station, Antarctica. This deployment was part of the antarctic Space Analog Program, a joint program between NASA and the National Science Foundation to demonstrate technologies relevant for space exploration in realistic field setting in the Antarctic. The goal of the mission was to operationally test the use of telepresence and virtual reality technology in the operator interface to a remote vehicle, while performing a benthic ecology study. The vehicle was operated both locally, from above a dive hole in the ice through which it was launched, and remotely over a satellite communications link from a control room at NASA's Ames Research Center. Local control of the vehicle was accomplished using the standard Phantom control box containing joysticks and switches, with the operator viewing stereo video camera images on a stereo display monitor. Remote control of the vehicle over the satellite link was accomplished using the Virtual Environment Vehicle Interface (VEVI) control software developed at NASA Ames. The remote operator interface included either a stereo display monitor similar to that used locally or a stereo head-mounted head-tracked display. The compressed video signal from the vehicle was transmitted to NASA Ames over a 768 Kbps satellite channel. Another channel was used to provide a bi-directional Internet link to the vehicle control computer through which the command and telemetry signals traveled, along with a bi-directional telephone service. In addition to the live stereo video from the satellite link, the operator could view a computer-generated graphic representation of the underwater terrain, modeled from the vehicle's sensors. The virtual environment contained an animate graphic model of the vehicle which reflected the state of the actual vehicle, along with ancillary information such

  1. Lignin-AuNPs liquid marble for remotely-controllable detection of Pb2+

    Han, Guocheng; Wang, Xiaoying; Hamel, Jonathan; Zhu, Hongli; Sun, Runcang


    This work reported the green and facile fabrication of a versatile lignin-AuNP composite, which was readily and remotely encapsulated to form novel liquid marbles. The marbles can stay suspended in water, and show excellent photothermal conversion properties, as well as visual detection and adsorption towards Pb2+. More importantly, the marbles can simultaneously remotely detect and adsorb Pb2+ via co-precipitation by simply controlling the near infrared (NIR) irradiation. It is believed that the remotely-controllable NIR-responsive lignin-AuNPs liquid marble can be used in Pb2+-related reactions. The liquid marble can be placed in the system at the very beginning of the reaction and stably stays on the surface until the reaction has ended. After reacting, upon remote NIR irradiation, the liquid marble bursts to adsorb Pb2+, and the residual Pb2+ can be collected. This facile manipulation strategy does not use complicated nanostructures or sophisticated equipment, so it has potential applications for channel-free microfluidics, smart microreactors, microengines, and so on.

  2. Parameter-less remote real-time control for the adjustment of pressure in water distribution systems

    Page, Philip R


    Full Text Available Reducing pressure in a water distribution system leads to a decrease in water leakage, decreased cracks in pipes, and consumption decreases. Pressure management includes an advanced type called remote real-time control. Here pressure control valves...

  3. Control, data acquisition and remote participation for steady-state operation in LHD

    Sudo, S. [National Institute of Natural Sciences, 322-6 Oroshi, Toki 509-5292 (Japan)]. E-mail:; Nagayama, Y. [National Institute of Natural Sciences, 322-6 Oroshi, Toki 509-5292 (Japan); Emoto, M. [National Institute of Natural Sciences, 322-6 Oroshi, Toki 509-5292 (Japan); Nakanishi, H. [National Institute of Natural Sciences, 322-6 Oroshi, Toki 509-5292 (Japan); Chikaraishi, H. [National Institute of Natural Sciences, 322-6 Oroshi, Toki 509-5292 (Japan); Imazu, S. [National Institute of Natural Sciences, 322-6 Oroshi, Toki 509-5292 (Japan); Iwata, C. [National Institute of Natural Sciences, 322-6 Oroshi, Toki 509-5292 (Japan); Kogi, Y. [KASTEC, Kyushu University, Kasuga 816-8580 (Japan); Kojima, M. [National Institute of Natural Sciences, 322-6 Oroshi, Toki 509-5292 (Japan); Komada, S. [National Institute of Natural Sciences, 322-6 Oroshi, Toki 509-5292 (Japan); Kubo, S. [National Institute of Natural Sciences, 322-6 Oroshi, Toki 509-5292 (Japan); Kumazawa, R. [National Institute of Natural Sciences, 322-6 Oroshi, Toki 509-5292 (Japan); Mase, A. [KASTEC, Kyushu University, Kasuga 816-8580 (Japan); Miyazawa, J. [National Institute of Natural Sciences, 322-6 Oroshi, Toki 509-5292 (Japan); Mutoh, T. [National Institute of Natural Sciences, 322-6 Oroshi, Toki 509-5292 (Japan); Nakamura, Y. [National Institute of Natural Sciences, 322-6 Oroshi, Toki 509-5292 (Japan); Nonomura, M. [National Institute of Natural Sciences, 322-6 Oroshi, Toki 509-5292 (Japan); Ohsuna, M. [National Institute of Natural Sciences, 322-6 Oroshi, Toki 509-5292 (Japan); Saito, K. [National Institute of Natural Sciences, 322-6 Oroshi, Toki 509-5292 (Japan); Sakamoto, R.; Seki, T.; Shoji, M.; Tsuda, K.; Yoshida, M. [National Institute of Natural Sciences, 322-6 Oroshi, Toki 509-5292 (Japan)


    Control, data acquisition, plasma monitoring and remote participation for steady state operation in the large helical device (LHD) are reviewed. By controlling the impedance matching of ICH, the plasma position and the electron density, high temperature plasma is confined for 1905s. The plasma parameters are monitored in real time. Data are continuously sampled by the YOKOGAWA WE7000 system and by the NATIONAL INSTRUMENTS CompactPCI system. Those data are managed by the object-oriented database system based on ObjectStore in distributed servers with mass storage. By using the multi protocol label switching-virtual private network (MPLS-VPN) technology, the local area network of LHD is expanded to the Japanese fusion community. This provides the remote participants with the same environment of the LHD control room.

  4. Model-based beam control for illumination of remote objects

    Chandler, Susan M.; Lukesh, Gordon W.; Voelz, David; Basu, Santasri; Sjogren, Jon A.


    On September 1, 2003, Nukove Scientific Consulting, together with partner New Mexico State University, began work on a Phase 1 Small Business Technology TRansfer (STTR) grant from the United States Air Force Office of Scientific Research (AFOSR). The purpose of the grant was to show the feasibility of taking Nukove's pointing estimation technique from a post-processing tool for estimation of laser system characteristics to a real-time tool usable in the field. Nukove's techniques for pointing, shape, and OCS estimation do not require an imaging sensor nor a target board, thus estimates may be made very quickly. To prove feasibility, Nukove developed an analysis tool RHINO (Real-time Histogram Interpretation of Numerical Observations) and successfully demonstrated the emulation of real-time, frame-by-frame estimation of laser system characteristics, with data streamed into the tool and the estimates displayed as they are made. The eventual objective will be to use the frame-by-frame estimates to allow for feedback to a fielded system. Closely associated with this, NMSU developed a laboratory testbed to illuminate test objects, collect the received photons, and stream the data into RHINO. The two coupled efforts clearly demonstrate the feasibility of real-time pointing control of a laser system.

  5. A Mobile Application for Smart House Remote Control System

    Rajabzadeh, Amir; Jahromi, Zahra Forootan


    At the start of the second decade of 21th century, the time has come to make the Smart Houses a reality for regular use. The different parts of a Smart House are researched but there are still distances from an applicable system, using the modern technology. In this paper we present an overview of the Smart House subsystems necessary for controlling the house using a mobile application efficiently and securely. The sequence diagram of the mobile application connecting to the server application and also the use-cases possible are presented. The challenges faced in designing the mobile application and illustrating the updated house top plane view in that application, are discussed and solutions are adapted for it. Finally the designed mobile application was implemented and the important sections of it were described, such as the interactive house top view map which indicates the status of the devices using predefined icons. The facilities to manage the scheduled tasks and defined rules are also implemented in t...

  6. An artificial reality environment for remote factory control and monitoring

    Kosta, Charles Paul; Krolak, Patrick D.


    Work has begun on the merger of two well known systems, VEOS (HITLab) and CLIPS (NASA). In the recent past, the University of Massachusetts Lowell developed a parallel version of NASA CLIPS, called P-CLIPS. This modification allows users to create smaller expert systems which are able to communicate with each other to jointly solve problems. With the merger of a VEOS message system, PCLIPS-V can now act as a group of entities working within VEOS. To display the 3D virtual world we have been using a graphics package called HOOPS, from Ithaca Software. The artificial reality environment we have set up contains actors and objects as found in our Lincoln Logs Factory of the Future project. The environment allows us to view and control the objects within the virtual world. All communication between the separate CLIPS expert systems is done through VEOS. A graphical renderer generates camera views on X-Windows devices; Head Mounted Devices are not required. This allows more people to make use of this technology. We are experimenting with different types of virtual vehicles to give the user a sense that he or she is actually moving around inside the factory looking ahead through windows and virtual monitors.

  7. 47 CFR 95.217 - (R/C Rule 17) May I operate my R/C station transmitter by remote control?


    ... transmitter by remote control? 95.217 Section 95.217 Telecommunication FEDERAL COMMUNICATIONS COMMISSION... control? (a) You may not operate an R/C transmitter by radio remote control. (See R/C Rule 12, § 95.212.) (b) You may operate an R/C transmitter by wireline remote control if you obtain specific approval in...

  8. Integrated digital control and man-machine interface for complex remote handling systems

    Rowe, J.C.; Spille, R.F.; Zimmermann, S.D.


    The Advanced Integrated Maintenance System (AIMS) is part of a continuing effort within the Consolidated Fuel Reprocessing Program at Oak Ridge National Laboratory to develop and extend the capabilities of remote manipulation and maintenance technology. The AIMS is a totally integrated approach to remote handling in hazardous environments. State-of-the-art computer systems connected through a high-speed communication network provide a real-time distributed control system that supports the flexibility and expandability needed for large integrated maintenance applications. A Man-Machine Interface provides high-level human interaction through a powerful color graphics menu-controlled operator console. An auxiliary control system handles the real-time processing needs for a variety of support hardware. A pair of dedicated fiber-optic-linked master/slave computer system control the Advanced Servomanipulator master/slave arms using powerful distributed digital processing methods. The FORTH language was used as a real-time operating and development environment for the entire system, and all of these components are integrated into a control room concept that represents the latest advancements in the development of remote maintenance facilities for hazardous environments.

  9. Information flow and controlling in regularization inversion of quantitative remote sensing

    YANG Hua; XU Wangli; ZHAO Hongrui; CHEN Xue; WANG Jindi


    In order to minimize uncertainty of the inversed parameters to the largest extent by making full use of the limited information in remote sensing data, it is necessary to understand what the information flow in quantitative remote sensing model inversion is, thus control the information flow. Aiming at this, the paper takes the linear kernel-driven model inversion as an example. At first, the information flow in different inversion methods is calculated and analyzed, then the effect of information flow controlled by multi-stage inversion strategy is studied, finally, an information matrix based on USM is defined to control information flow in inversion. It shows that using Shannon entropy decrease of the inversed parameters can express information flow more properly. Changing the weight of a priori knowledge in inversion or fixing parameters and partitioning datasets in multi-stage inversion strategy can control information flow. In regularization inversion of remote sensing, information matrix based on USM may be a better tool for quantitatively controlling information flow.

  10. Application of model reference adaptive control to a flexible remote manipulator arm

    Meldrum, D. R.; Balas, M. J.


    An exact modal state-space representation is derived in detail for a single-link, flexible remote manipulator with a noncollocated sensor and actuator. A direct model following adaptive controller is designed to control the torque at the pinned end of the arm so as to command the free end to track a prescribed sinusoidal motion. Conditions that must be satisfied in order for the controller to work are stated. Simulation results to date are discussed along with the potential of the model following adaptive control scheme in robotics and space environments.

  11. Design and Implementation of a Remote Control System for a Bio-inspired Jumping Robot

    Jun Zhang


    Full Text Available This paper presents the design and implementation of a remote control system for a bio‐ inspired jumping robot. The system is composed of a server, a gateway, and a jumping robot. The proposed remote control system is used to monitor the posture of the jumping robot and control it in remote places. A three‐axis accelerometer is used to detect the tilts of the robot. A compass is used to sense the azimuth of the robot. The calibrations of the accelerometer and the compass are conducted. The sensor data of the robot can be sent to the server through a ZigBee wireless sensor network (WSN. An algorithm is designed to calculate the posture of the robot from the sensor data. The posture of the robot can be displayed on the human‐computer interface of the server using the virtual reality technology of OpenGL. The robots can be controlled by the operator through the interface. Two experiments have been done to verify the posture detection method and test the performance of the system.

  12. Concentration and temperature controlled oxidation and cutting of single-walled carbon nanotubes by ammonium persulfate

    AHMAD; Mirza; Nadeem


    SWNTs were oxidized by a simple wet chemical method involving treatment in aqueous ammonium persulfate(APS) solution at a certain temperature.Fourier transform infrared spectroscopy(FTIR) and X-ray photoelectron spectroscopy(XPS) demonstrated that a large amount of oxygen containing groups such as hydroxyl groups and carbonyl groups was attached to the sidewall of SWNTs.The oxidized SWNTs showed good solubility in polar solvents including water and DMF.Atomic force microscopic images showed that SWNTs could be cut into short pipes by the highly concentrated APS solution at 80℃.With the decrease of reaction temperature or APS concentration,the oxidized SWNTs remained uncut.

  13. Design of automatic pattern laser-cutting system based on DSP control%花样激光自动裁剪系统的DSP控制

    蒋水秀; 张森林; 殷建军


    To achieve high speed clothing cutting with high control precision, the control system for cutting automatically by laser is developed. Taking advantages of digital signal processor TMS320F2812's rich hardware resources, the system improved laser cutting technology and tangent motion interpolation algorithm. Based on laser cutting principle and general design ideas of auto-cutting system, the mechanical structure with hardware and software is developed for the cutting control system. It involved secure digital card storage and FAT32 file management process, realizing the transmission of files for trajectory control. The results indicated that this automatic laser-cutting system fulfils cutting more exactly and efficiently. Compared with conventional products, it deleted the vibration from mechanical cutter, meanwhile improving the work efficiency and quality for clothing cutting or pattern cutting.%为实现服装面料优质高效裁剪,引入激光裁剪技术,采用具有丰富外设资源的DSP处理器TMS320F2812,运用正切运动插补算法,研发激光自动裁剪控制系统.依据激光裁剪原理和自动裁剪系统的总体设计,完成结构设计和硬件设计,同时配合软件设计,应用SD卡存储及FAT32文件管理程序,实现轨迹控制文件的传输.结果表明:激光自动裁剪系统具有高精度、高效率的裁剪效果.克服了传统机械裁剪刀具切削引起的震动,不但提高了面料或花样裁剪的质量,而且也提高了裁剪效能.

  14. Enabling People with Developmental Disabilities to Actively Perform Designated Occupational Activities according to Simple Instructions with a Nintendo Wii Remote Controller by Controlling Environmental Stimulation

    Shih, Ching-Hsiang; Wang, Shu-Hui; Chang, Man-Ling; Shih, Ching-Hsiang


    The latest researches have adopted software technology, turning the Nintendo Wii Remote Controller into a high performance three-dimensional object orientation detector. This study extended Wii Remote Controller functionality to assess whether two people with developmental disabilities would be able to actively perform designated simple…

  15. Assisting People with Multiple Disabilities by Actively Keeping the Head in an Upright Position with a Nintendo Wii Remote Controller through the Control of an Environmental Stimulation

    Shih, Ching-Hsiang; Shih, Chia-Ju; Shih, Ching-Tien


    The latest researches have adopted software technology by applying the Nintendo Wii Remote Controller to the correction of hyperactive limb behavior. This study extended Wii Remote Controller functionality for improper head position (posture) correction (i.e. actively adjusting abnormal head posture) to assess whether two people with multiple…

  16. Assisting People with Multiple Disabilities by Actively Keeping the Head in an Upright Position with a Nintendo Wii Remote Controller through the Control of an Environmental Stimulation

    Shih, Ching-Hsiang; Shih, Chia-Ju; Shih, Ching-Tien


    The latest researches have adopted software technology by applying the Nintendo Wii Remote Controller to the correction of hyperactive limb behavior. This study extended Wii Remote Controller functionality for improper head position (posture) correction (i.e. actively adjusting abnormal head posture) to assess whether two people with multiple…

  17. Research on Remote Monitoring and Fault Diagnosis Technology of Numerical Control Machine

    ZHANG Jianyu; GAO Lixin; CUI Lingli; LI Xianghui; WANG Yingwang


    Based on the internet technology, it has become possible to complete remote monitoring and fault diagnosis for the numerical control machine. In order to capture the micro-shock signal induced by the incipient fault on the rotating parts, the resonance demodulation technology is utilized in the system. As a subsystem of the remote monitoring system, the embedded data acquisition instrument not only integrates the demodulation board but also complete the collection and preprocess of monitoring data from different machines. Furthermore, through connecting to the internet, the data can be transferred to the remote diagnosis center and data reading and writing function can be finished in the database. At the same time, the problem of the IP address floating in the dial-up of web server is solved by the dynamic DNS technology. Finally, the remote diagnosis software developed on the LabVIEW platform can analyze the monitoring data from manufacturing field. The research results have indicated that the equipment status can be monitored by the system effectively.

  18. Remote collaborative pseudo-dynamic testing system based on acquisition board control


    In this paper,NetSLab network platform for remote collaborative pseudo-dynamic testing,which was developed recently by a research group led by the Hunan University,is presented.Aiming at MTS system which is widely used in structural tesring.the control method with acquisition board Was investigated in this study to realize the communication interface between NetSLab and MTS system,and open up the remote collaborative pseudo-dynamic testing system.Using the developed testing system,a collaborative pseudo-dynamic testing on LAN was carried out successfully.The result manifests that the data transmission and collaborative control can be implemented accurately between NetSLab and MTS system,so that the usability of the testing system is validated.

  19. A Semi-Automatic, Remote-Controlled Video Observation System for Transient Luminous Events

    Allin, Thomas Højgaard; Neubert, Torsten; Laursen, Steen


    In support for global ELF/VLF observations, HF measurements in France, and conjugate photometry/VLF observations in South Africa, we developed and operated a semi-automatic, remotely controlled video system for the observation of middle-atmospheric transient luminous events (TLEs). Installed...... at the Pic du Midi Observatory in Southern France, the system was operational during the period from July 18 to September 15, 2003. The video system, based two low-light, non-intensified CCD video cameras, was mounted on top of a motorized pan/tilt unit. The cameras and the pan/tilt unit were controlled over...... serial links from a local computer, and the video outputs were distributed to a pair of PCI frame grabbers in the computer. This setup allowed remote users to log in and operate the system over the internet. Event detection software provided means of recording and time-stamping single TLE video fields...

  20. Design, Fabrication and Testing of Mooring Masts for Remotely Controlled Indoor and Outdoor Airships

    Khaleelullah, Syed; Bhardwaj, Utsav; Pant, Rajkumar Sureshchandra


    This paper presents the design and structural details of two mooring masts, one for remotely controlled outdoor airships and another one for remotely controlled indoor airships. In a previous study, a mast for outdoor remotely controlled airship was designed to meet several user-specified operating requirements, and a simplified version of the same was fabricated. A spring loaded device was incorporated that sounds an alarm when the wind-loads exceed a threshold value, so that the airship can be taken indoors. The present study started with a critical analysis of that mast, and a new mast was designed and fabricated to remove several of its shortcomings. This mast consists of power screw operated telescopic module made of aluminium, mounted on a five legged base with castor wheels, for ease in mobility. Components of the existing mast were used to the possible extent, and the design was simplified to meet the assembly and transportation requirements. The spring mechanism used in alarming device was also modified to ensure higher sensitivity in the range of maximum expected wind-loads acting on the airship. A lightweight mooring mast for indoor remotely controlled airships was also designed and fabricated, which can accommodate non-rigid indoor airships of length up to 5 m. The mast consists of an elevating bolt operated telescopic module mounted on a tripod adapter base, with lockable castor wheels, and has a specially designed mooring-clamp at the top. The various modules and components of the mast were designed to enable quick assembly and transportation.

  1. STS-40 Columbia, OV-102, KSC liftoff from a remote control tracking device


    STS-40 Columbia, Orbiter Vehicle (OV) 102, riding atop the external tank(ET), begins its roll maneuver after lifting off from the Kennedy Space Center (KSC) launch complex (LC) pad at 9:24:51 am (Eastern Daylight Time (EDT)). Exhaust plumes billow from the solid rocket booster (SRB) skirts. The glow of the three space shuttle main engines (SSMEs) is visible. This photo was taken by a remote control tracking device mounted 1600 feet from epicenter.

  2. Pemanfaatan Fitur Remote Control Melalui Media Bluetooth pada Telepon Seluler Sebagai Alat Bantu Proses Pengajaran

    Indra Kusumadi Hartono


    Full Text Available Teaching methods commonly require dynamic presentation techniques. Cellular phone technology can be utilized as a remote control via Bluetooth. Several experiments are conducted in simple ways to measure the effective distance between the device cell phone-notebook and PC-cell phone. Based on the research, it is concluded that local cell phones turned out to be acceptable as a teaching device utilized at campus. 

  3. Development of remote controlled forest machine. Final report; Kauko-ohjattavan harvennuskoneen kehittaeminen. Loppuraportti

    Kerva, J.; Lippo, J. [VTT Automation, Oulu (Finland); Nousiainen, I.; Oijala, T.; Vesisenaho, T. [VTT Energy, Jyvaeskylae (Finland)


    The aim of the project was to develop the prototype for the forest machine for the first state thinning. The machine is light and it will reduce the damages of the ground compared to damages caused by normal forest machines. The prototype is operated by wireless remote controller and there is no cabinet. To improve driving in the forest, anti-slip wheel control system is used. To make working with the machine more efficient and easy, automatic and semiautomatic operations in workboom control are included. Compared to normal size forest machines the machine developed in the project can give more economic solution for first state thinning. (orig.)

  4. Remote Control

    Bolch, Matt


    Imagine school district staff inputting school data and sharing it in real time, managing teacher absences and arranging substitutes from the comfort of home, or deploying IT personnel to the right site at the right time to tackle the highest-priority jobs first. The concept of managing applications from anywhere with a network connection, known…

  5. Herbaceous Production In Cut-burned, Uncut-burned, And Control Areas Of A Charnaecyparis thyoides (L.) BSP (Cupressaceae) Stand In The Great Dismal Swamp

    US Fish and Wildlife Service, Department of the Interior — Herbaceous Production in cut-burned, uncut-burned, and control areas of a Chamaecyparis thyoides (L.) BSP (Cupressaceae) stand in the Great Dismal Swamp. The biomass...

  6. Design of a Remote-controlled and GPS-guided Autonomous Robot for Precision Farming

    İlker Ünal


    Full Text Available Determining variations in fields is important for precision farming applications. Precision farming is used to determine, analyse, and manage factors such as temporal and spatial variability to obtain maximum profit, sustainability, and environmental protection. However, precision farming is excessively dependent on soil and plant test processes. Furthermore, test processes are time-consuming, laborious and expensive. These processes also cannot be performed quickly by humans. For these reasons, autonomous robots should be designed and developed for the detection of field variations and variable-rate applications. In this study, a remote-controlled and GPS-guided autonomous robot was designed and developed, which can be controlled via the 3G internet and is suitable for image-processing applications. The joystick is used to manually remotely control the robot movements in any direction or speed. Real-time video transmission to the remote computer can be accomplished with a camera placed on the vehicle. Navigation software was developed for steering the robot autonomously. In the results of the field test for the navigation software, it was found that the linear target point precision ranged from 10 to 12 cm and the distributed target point precision ranged from 15 to 17 cm.

  7. Virtual environment for local and remote control of a robot arm for support in engineering teaching

    José T. Buitrago-Molina


    Full Text Available This paper presents the design and implementation of a virtual platform that allows simulation and local and remote command and control of the SCARA robot arm called UV-CERMA, which is installed at the Robotics Laboratory of the Escuela de Ingeniería Eléctrica y Electrónica, Facultad de Ingeniería, Universidad del Valle. The robot has been underutilized for some years due to the obsolete control system. The platform, focused on the engineering education methodology, consists of two applications which simulate the robot and permit its remote and local command and control. One of the applications was implemented on LabVIEW software of National Instruments and the other application was programmed on free software using the open source language Java. Both applications implement forward kinematics and inverse kinematics, have a module for trajectories planning and operation, a module for monitoring the values of the variables and a three dimensional model of the robot. To manipulate the robot, an interface with a joystick was developed, enhancing the versatility of the platform. The applications communicate with the real robot using the National Instruments data acquisition card NI USB-6211, and for the remote connection they have a client-server architecture using TCP/IP sockets.

  8. Development of a dual joystick-controlled laser trapping and cutting system for optical micromanipulation of chromosomes inside living cells.

    Harsono, Marcellinus S; Zhu, Qingyuan; Shi, Linda Z; Duquette, Michelle; Berns, Michael W


    A multi-joystick robotic laser microscope system used to control two optical traps (tweezers) and one laser scissors has been developed for subcellular organelle manipulation. The use of joysticks has provided a "user-friendly" method for both trapping and cutting of organelles such as chromosomes in live cells. This innovative design has enabled the clean severing of chromosome arms using the laser scissors as well as the ability to easily hold and pull the severed arm using the laser tweezers. Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  9. Remote detection of artificially triggered avalanches below a fixed avalanche control installation

    van Herwijnen, Alec; Simioni, Stephan; Schweizer, Juerg


    Avalanche control by explosives is widely used as a temporary preventive measure to reduce avalanche hazard. The goal is to artificially trigger smaller less destructive avalanches, by detonating charges either above or on the snow surface. Hand charges are most often used, whereby the explosives are deployed by manually hand tossing or lowering onto the snow slope. Given the inherent dangers and limitations of this type of avalanche control, fixed avalanche control installations are increasingly used. These consist of strategically placed remote controlled installations that generate an explosion above the snow pack in an avalanche starting zone. While fixed installations can be used at any time and minimize the risk to avalanche control personnel, visual confirmation is still required to verify if an avalanche released. In order to remotely detect artificially triggered avalanches, we therefore developed a low-cost seismic monitoring system. We deployed the monitoring system in a ski area above the town of Davos , in the eastern Swiss Alps, below a Gazex installation, a remote controlled installation that generates an air blast by detonating a fuel-air explosive above the snow pack. The monitoring system consists of three vertical component geophones inserted in the ground at approximately 14, 27 and 46 meters from the Gazex installation. Our results show that, despite the relatively low precision of the monitoring equipment, both the detonation and the resulting avalanches can clearly be identified in the seismic data. Specifically, detonations are characterized by short, high amplitude broadband signals, while avalanches generate much longer, low frequency signals. Furthermore, information on the size of the artificially triggered avalanches is also obtained as it directly relates to the duration of the generated seismic signal. The overall goal is to assess the effectiveness of the fixed avalanche control installation with regards to yield (i.e. number of

  10. Enzymatic browning control in cut apples (Red delicious through a system of active packaging

    Felipe Jadán Piedra


    Full Text Available Enzymatic browning is one of the most relevant mechanisms of deterioration that take place in fresh-cut fruit and vegetables, as a consequence of the activity of the polyphenol oxidase enzyme on the phenolic compounds release after cellular lysis . This work is focused on the reduction of these enzymatic activity by an active packaging technology, which make use of a material that incorporates antioxidant active agents. Thus, films of ethylene-vynil alcohol copolymer (EVOH containing a typical food antioxidant, such as ascorbic acid and a polyphenol oxidase-inhibiting agent, the 4-hexylresorcinol have been developed and used to wrap apple slices. The evolution of color, the enzymatic activity and the kinetic of agents release to food simulants were monitored. The results showed an improvement of apple slice color stability and a reduction of the enzymatic activity. The film with 10 % of agents in 3/1 ratio (4-hexylresorcinol/ascorbic acid provided the best results.

  11. A Remote Laboratory Platform for Electrical Drive Control Using Programmable Logic Controllers

    Ferrater-Simon, C.; Molas-Balada, L.; Gomis-Bellmunt, O.; Lorenzo-Martinez, N.; Bayo-Puxan, O.; Villafafila-Robles, R.


    Many teaching institutions worldwide are working on distance learning applications. In this field, remote laboratories are enabling intensive use of university facilities, while aiding the work of professors and students. The present paper introduces a platform designed to be used in industrial automation practical work. The platform is…

  12. Control of foodborne pathogens on fresh-cut fruit by a novel strain of Pseudomonas graminis.

    Alegre, Isabel; Viñas, Inmaculada; Usall, Josep; Teixidó, Neus; Figge, Marian J; Abadias, Maribel


    The consumption of fresh-cut fruit has substantially risen over the last few years, leading to an increase in the number of outbreaks associated with fruit. Moreover, consumers are currently demanding wholesome, fresh-like, safe foods without added chemicals. As a response, the aim of this study was to determine if the naturally occurring microorganisms on fruit are "competitive with" or "antagonistic to" potentially encountered pathogens. Of the 97 and 107 isolates tested by co-inoculation with Escherichia coli O157:H7, Salmonella and Listeria innocua on fresh-cut apple and peach, respectively, and stored at 20 °C, seven showed a strong antagonistic capacity (more than 1-log unit reduction). One of the isolates, CPA-7, achieved the best reduction values (from 2.8 to 5.9-log units) and was the only isolate able to inhibit E. coli O157:H7 at refrigeration temperatures on both fruits. Therefore, CPA-7 was selected for further assays. Dose-response assays showed that CPA-7 should be present in at least the same amount as the pathogen to adequately reduce the numbers of the pathogen. From the results obtained in in vitro assays, competition seemed to be CPA-7's mode of action against E. coli O157:H7. The CPA-7 strain was identified as Pseudomonas graminis. Thus, the results support the potential use of CPA-7 as a bioprotective agent against foodborne pathogens in minimally processed fruit. Copyright © 2013 Elsevier Ltd. All rights reserved.

  13. 基于人类视觉系统区域分裂的图割遥感图像分割算法研究%Remote Sensing Image Segmentation Based on Human Visual System Region Splitting and Graph Cut

    蒋华; 温静; 王玉斌


    Aiming at the problem of poor real-time ability of Normalized Cut (NO , this paper suggests a remote sensing image segmentation algorithm based on region splitting and graph within human visual system(HVS). According to the features of HVS,the algorithm uses region splitting method to segment the remote sensing image into a large number of small regions. By integrating gray feature and spatial location of each region,NC is used to segment the image among regions from global view,by which the final segmented image can be generated. Experimental result shows that compared with the traditional NC,operating speed is significantly improved as getting close to the segmentation quality,and this is a kind of effective method of image segmentation.%针对传统Normalized Cut(NC)在分割图像过程中实时性差的特点,提出一种使用人类视觉系统(HVS)区域分裂的图割方法.根据HVS特性用区域分裂算法将遥感图像分割成多个小区域,再结合各个小区域的灰度和空间信息从全局角度用NC方法在区域间进行划分,完成图像的最终分割.实验表明,相对于传统的NC方法,该算法在获得相近分割质量的同时,分割速度有了显著提高,是一种有效的图像分割方法.


    Shuxin Xu


    Full Text Available If a defect unexpectedly arises in the direction of supply while working a «free» curve being distinguished by a arbitrary curvature and small value twisting from the given ones then there will be worsening of cutting process that will lead to surface defects of the machined surface or tool break down. A method of wave analysis has been used for an experimental study of power in specific frequency bands and a minimum cutter damage has been obtained which with power on a drive motor makes it possible to control supply, restoring the condition of cutting. A technical novelty of automatic control method has been proposed according to instantaneous defect by means wave change on a drive motor. The problem of quantitative assessment of machined surface defects has been successfully solved in the paper.

  15. Multivariable control of the Space Shuttle Remote Manipulator System using linearization by state feedback

    Gettman, Chang-Ching L.; Adams, Neil; Bedrossian, Nazareth; Valavani, Lena


    This paper demonstrates an approach to nonlinear control system design that uses linearization by state feedback to allow faster maneuvering of payloads by the Shuttle Remote Manipulator System (SRMS). A nonlinear feedback law is defined to cancel the nonlinear plant dynamics so that a linear controller can be designed for the SRMS. First a nonlinear design model was generated via SIMULINK. This design model included nonlinear arm dynamics derived from the Lagrangian approach, linearized servo model, and linearized gearbox model. The current SRMS position hold controller was implemented on this system. Next, a trajectory was defined using a rigid body kinematics SRMS tool, KRMS. The maneuver was simulated. Finally, higher bandwidth controllers were developed. Results of the new controllers were compared with the existing SRMS automatic control modes for the Space Station Freedom Mission Build 4 Payload extended on the SRMS.

  16. A remotely driven and controlled micro-gripper fabricated from light-induced deformation smart material

    Huang, Chaolei; Lv, Jiu-an; Tian, Xiaojun; Wang, Yuechao; Liu, Jie; Yu, Yanlei


    Micro-gripper is an important tool to manipulate and assemble micro-scale objects. Generally, as micro-gripper is too small to be directly driven by general motors, it always needs special driving devices and suitable structure design. In this paper, two-finger micro-grippers are designed and fabricated, which utilize light-induced deformation smart material to make one of the two fingers. As the smart material is directly driven and controlled by remote lights instead of lines and motors, this light-driven mode simplifies the design of the two-finger micro-gripper and avoids special drivers and complex mechanical structure. In addition, a micro-manipulation experiment system is set up which is based on the light-driven micro-gripper. Experimental results show that this remotely light-driven micro-gripper has ability to manipulate and assemble micro-scale objects both in air and water. Furthermore, two micro-grippers can also work together for cooperation which can further enhance the assembly ability. On the other hand, this kind of remotely controllable micro-gripper that does not require on-board energy storage, can be used in mobile micro-robot as a manipulation hand.

  17. A sip-and-puff wireless remote control for the Apple iPod.

    Jones, Michael; Grogg, Kevin; Anschutz, John; Fierman, Ruth


    This brief technical note describes the authors' efforts to modify an existing wireless remote control for the Apple iPod so it could be operated using sip-and-puff switches by individuals with limited upper extremity dexterity due to cervical level spinal cord injury. The authors were able to successfully interface the wireless controller with sip-and-puff switches so that users could play, pause, and fast forward through a song list on the iPod. Details of the interface are described, and limitations of the current system are discussed.

  18. Remote Manipulator System (RMS)-based Controls-Structures Interaction (CSI) flight experiment feasibility study

    Demeo, Martha E.


    The feasibility of an experiment which will provide an on-orbit validation of Controls-Structures Interaction (CSI) technology, was investigated. The experiment will demonstrate the on-orbit characterization and flexible-body control of large flexible structure dynamics using the shuttle Remote Manipulator System (RMS) with an attached payload as a test article. By utilizing existing hardware as well as establishing integration, operation and safety algorithms, techniques and procedures, the experiment will minimize the costs and risks of implementing a flight experiment. The experiment will also offer spin-off enhancement to both the Shuttle RMS (SRMS) and the Space Station RMS (SSRMS).

  19. Study and development of techniques for automatic control of remote manipulators

    Shaket, E.; Leal, A.


    An overall conceptual design for an autonomous control system of remote manipulators which utilizes feedback was constructed. The system consists of a description of the high-level capabilities of a model from which design algorithms are constructed. The autonomous capability is achieved through automatic planning and locally controlled execution of the plans. The operator gives his commands in high level task-oriented terms. The system transforms these commands into a plan. It uses built-in procedural knowledge of the problem domain and an internal model of the current state of the world.

  20. Optical Communication System for Remote Monitoring and Adaptive Control of Distributed Ground Sensors Exhibiting Collective Intelligence

    Cameron, S.M.; Stantz, K.M.; Trahan, M.W.; Wagner, J.S.


    Comprehensive management of the battle-space has created new requirements in information management, communication, and interoperability as they effect surveillance and situational awareness. The objective of this proposal is to expand intelligent controls theory to produce a uniquely powerful implementation of distributed ground-based measurement incorporating both local collective behavior, and interoperative global optimization for sensor fusion and mission oversight. By using a layered hierarchal control architecture to orchestrate adaptive reconfiguration of autonomous robotic agents, we can improve overall robustness and functionality in dynamic tactical environments without information bottlenecks. In this concept, each sensor is equipped with a miniaturized optical reflectance modulator which is interactively monitored as a remote transponder using a covert laser communication protocol from a remote mothership or operative. Robot data-sharing at the ground level can be leveraged with global evaluation criteria, including terrain overlays and remote imaging data. Information sharing and distributed intelli- gence opens up a new class of remote-sensing applications in which small single-function autono- mous observers at the local level can collectively optimize and measure large scale ground-level signals. AS the need for coverage and the number of agents grows to improve spatial resolution, cooperative behavior orchestrated by a global situational awareness umbrella will be an essential ingredient to offset increasing bandwidth requirements within the net. A system of the type described in this proposal will be capable of sensitively detecting, tracking, and mapping spatial distributions of measurement signatures which are non-stationary or obscured by clutter and inter- fering obstacles by virtue of adaptive reconfiguration. This methodology could be used, for example, to field an adaptive ground-penetrating radar for detection of underground structures in

  1. Osmotically driven drug delivery through remote-controlled magnetic nanocomposite membranes

    Zaher, A.


    Implantable drug delivery systems can provide long-term reliability, controllability, and biocompatibility, and have been used in many applications, including cancer pain and non-malignant pain treatment. However, many of the available systems are limited to zero-order, inconsistent, or single burst event drug release. To address these limitations, we demonstrate prototypes of a remotely operated drug delivery device that offers controllability of drug release profiles, using osmotic pumping as a pressure source and magnetically triggered membranes as switchable on-demand valves. The membranes are made of either ethyl cellulose, or the proposed stronger cellulose acetate polymer, mixed with thermosensitive poly(N-isopropylacrylamide) hydrogel and superparamagnetic iron oxide particles. The prototype devices\\' drug diffusion rates are on the order of 0.5–2 μg/h for higher release rate designs, and 12–40 ng/h for lower release rates, with maximum release ratios of 4.2 and 3.2, respectively. The devices exhibit increased drug delivery rates with higher osmotic pumping rates or with magnetically increased membrane porosity. Furthermore, by vapor deposition of a cyanoacrylate layer, a drastic reduction of the drug delivery rate from micrograms down to tens of nanograms per hour is achieved. By utilizing magnetic membranes as the valve-control mechanism, triggered remotely by means of induction heating, the demonstrated drug delivery devices benefit from having the power source external to the system, eliminating the need for a battery. These designs multiply the potential approaches towards increasing the on-demand controllability and customizability of drug delivery profiles in the expanding field of implantable drug delivery systems, with the future possibility of remotely controlling the pressure source.

  2. Vehicle-carried remote control system%车载无线中控系统

    曹永胜; 白恩健


    针对中低端车辆车载系统缺乏智能的问题,将嵌入式 ARM 控制系统与4G 无线传输系统相结合,设计了基于 ARM 车载控制系统的无线远程监控系统。介绍了系统的整体架构以及模块间的数据通信和信号控制。为加强车主对车身的把握,系统有激光测距进行平面建模的扩展功能。实验表明,该方案可以用于中低端汽车实现快速、廉价的智能化。%Aiming at the lack of intelligence of low-end vehicle,the wireless remote control system based on ARM vehicle-carried control system is designed by combining the ARM control and 4G wireless transmission.The integrated structure of the system and data communication and signal control between modules are introduced.In order to strengthen the owner mastery of the vehicle , the system possess the expandable function of 2D modeling using laser ranging module.The experiment of remote control indicates that this strategy can be used in the rapid intelligence of low-end intelligent car.

  3. HIV controllers with different viral load cut-off levels have distinct virologic and immunologic profiles

    Bello, Gonzalo; Teixeira, Sylvia LM; Vorsatz, Carla; Babic, Dunja; Sharkey, Mark; Grinsztejn, Beatriz; Veloso, Valdilea; Stevenson, Mario; Morgado, Mariza G


    Background The mechanisms behind natural control of HIV replication are still unclear, and several studies pointed that elite controllers are a heterogeneous group. Methods We performed analyses of virologic, genetic and immunologic parameters of HIV-1 controllers groups: 1) Elite Controllers (EC; VL <80 copies/mL); 2) Ebbing Elite Controllers (EEC; transient viremia/blips); and Viremic Controllers (VC; detectable viremia <5,000 copies/mL). Untreated non-controllers (NC), patients under suppressive HAART and HIV-1 negative individuals were analyzed as controls. Results Total and integrated HIV-1 DNA for EC were significantly lower than for NC and HAART groups. 2-LTR circles were detected in EEC (3/5) and VC (6/7) but not in EC. While EC and EEC maintain normal T cell counts over time, some VC displayed negative CD4+ T cells slopes. VC and EEC showed a higher percentage of activated CD8+ T cells and microbial translocation than HIV-1 negative controls. EC displayed a weaker Gag/Nef IFN-γ T cell response and a significantly lower proportion of anti-HIV IgG antibodies than EEC, VC and NC groups. Conclusion Transient/persistent low level viremia in HIV controllers may have an impact on immunologic and virologic profiles. Classify HIV controllers patients taking into account their virologic profile may decrease the heterogeneity of HIV controllers cohorts, which may help to clarify the mechanisms associated to the elite control of HIV. PMID:25564106

  4. A fast and efficient adaptive threshold rate control scheme for remote sensing images.

    Chen, Xiao; Xu, Xiaoqing


    The JPEG2000 image compression standard is ideal for processing remote sensing images. However, its algorithm is complex and it requires large amounts of memory, making it difficult to adapt to the limited transmission and storage resources necessary for remote sensing images. In the present study, an improved rate control algorithm for remote sensing images is proposed. The required coded blocks are sorted downward according to their numbers of bit planes prior to entropy coding. An adaptive threshold computed from the combination of the minimum number of bit planes, along with the minimum rate-distortion slope and the compression ratio, is used to truncate passes of each code block during Tier-1 encoding. This routine avoids the encoding of all code passes and improves the coding efficiency. The simulation results show that the computational cost and working buffer memory size of the proposed algorithm reach only 18.13 and 7.81%, respectively, of the same parameters in the postcompression rate distortion algorithm, while the peak signal-to-noise ratio across the images remains almost the same. The proposed algorithm not only greatly reduces the code complexity and buffer requirements but also maintains the image quality.

  5. Integrated solution for the complete remote sensing process - Earth Observation Mission Control Centre (EOMC2)

    Czapski, Paweł


    We are going to show the latest achievements of the Remote Sensing Division of the Institute of Aviation in the area of remote sensing, i.e. the project of the integrated solution for the whole remote sensing process ranging from acquiring to providing the end user with required information. Currently, these tasks are partially performed by several centers in Poland, however there is no leader providing an integrated solution. Motivated by this fact, the Earth Observation Mission Control Centre (EOMC2) was established in the Remote Sensing Division of the Institute of Aviation that will provide such a comprehensive approach. Establishing of EOMC2 can be compared with creating Data Center Aerial and Satellite Data Centre (OPOLIS) in the Institute of Geodesy and Cartography in the mid-70s in Poland. OPOLIS was responsible for broadly defined data processing, it was a breakthrough innovation that initiated the use of aerial image analysis in Poland. Operation center is a part of the project that will be created, which in comparison with the competitors will provide better solutions, i.e.: • Centralization of the acquiring, processing, publishing and archiving of data, • Implementing elements of the INSPIRE directive recommendations on spatial data management, • Providing the end-user with information in the near real-time, • Ability of supplying the system with images of various origin (aerial, satellite, e.g. EUMETCast, Sentinel, Landsat) and diversity of telemetry data, data aggregation and using the same algorithms to images obtained from different sources, • System reconfiguration and batch processing of large data sets at any time, • A wide range of potential applications: precision agriculture, environmental protection, crisis management and national security, aerial, small satellite and sounding rocket missions monitoring.

  6. Effects of clove essential oil and eugenol on quality and browning control of fresh-cut lettuce.

    Chen, Xiangning; Ren, Lupei; Li, Menglin; Qian, Jia; Fan, Junfeng; Du, Bin


    This study confirmed the inhibitory effects of clove essential oil (CEO) and eugenol (EUG) on the browning and relevant enzymes of fresh-cut lettuce, and examined associated mechanisms by inhibition kinetics and computational docking analysis. Fresh-cut lettuce was treated with 0.05% CEO and 0.05% EUG solutions, resulting in inhibition of the deterioration of texture quality and browning of the lettuce surface and interior. Compared with the controls, CEO and EUG significantly inhibited the activities of phenylalanine ammonia lyase (PAL), polyphenol oxidase (PPO), and peroxidase (POD, all p<0.05). EUG suppressed PAL, PPO, and POD in vitro in a dose-dependent manner, with IC50 values of 5.4±0.9, 29.5±3.5, and 61.9±6.7mM, respectively. The binding and inhibition effects of EUG on PAL, PPO, and POD, determined by inhibition kinetics and computational docking analysis, established EUG as a competitive inhibitor of these browning-relevant enzymes.

  7. Cysteine Proteinase-1 and Cut Protein Isoform Control Dendritic Innervation of Two Distinct Sensory Fields by a Single Neuron

    Gray R. Lyons


    Full Text Available Dendrites often exhibit structural changes in response to local inputs. Although mechanisms that pattern and maintain dendritic arbors are becoming clearer, processes regulating regrowth, during context-dependent plasticity or after injury, remain poorly understood. We found that a class of Drosophila sensory neurons, through complete pruning and regeneration, can elaborate two distinct dendritic trees, innervating independent sensory fields. An expression screen identified Cysteine proteinase-1 (Cp1 as a critical regulator of this process. Unlike known ecdysone effectors, Cp1-mutant ddaC neurons pruned larval dendrites normally but failed to regrow adult dendrites. Cp1 expression was upregulated/concentrated in the nucleus during metamorphosis, controlling production of a truncated Cut homeodomain transcription factor. This truncated Cut, but not the full-length protein, allowed Cp1-mutant ddaC neurons to regenerate higher-order adult dendrites. These results identify a molecular pathway needed for dendrite regrowth after pruning, which allows the same neuron to innervate distinct sensory fields.

  8. Micro-controller based Remote Monitoring using Mobile through Spoken Commands

    Naresh P Jawarkar


    Full Text Available Mobile phone can serve as powerful tool for world-wide communication. A system is developed to remotely monitor process through spoken commands using mobile. Mel cepstrum features are extracted from spoken words. Learning Vector Quantization Neural Network is used for recognition of various words used in the command. The accuracy of spoken commands is about 98%. A text message is generated and sent to control system mobile in form of SMS. On receipt of SMS, control system mobile informs AVR micro-controller based card, which performs specified task. The system alerts user in case of occurrence of any abnormal conditions like power failure, loss of control, etc. Other applications where this approach can be extended are also discussed.

  9. Virtuality in human supervisory control: assessing the effects of psychological and social remoteness.

    Stanton, Neville A; Ashleigh, Melanie J; Roberts, Anthony D; Xu, Francis


    Virtuality would seem to offer certain advantages for human supervisory control. First, it could provide a physical analogue of the 'real world' environment. Second, it does not require control room engineers to be in the same place as each other. In order to investigate these issues, a low-fidelity simulation of an energy distribution network was developed. The main aims of the research were to assess some of the psychological concerns associated with virtual environments. First, it may result in the social isolation of the people, and it may have dramatic effects upon the nature of the work. Second, a direct physical correspondence with the 'real world' may not best support human supervisory control activities. Experimental teams were asked to control an energy distribution network. Measures of team performance, group identity and core job characteristics were taken. In general terms, the results showed that teams working in the same location performed better than teams who were remote from one another.

  10. Feedback control system based on a remote operated PID controller implemented using mbed NXP LPC1768 development board

    Pricop, Emil; Zamfir, Florin; Paraschiv, Nicolae


    Process control is a challenging research topic for both academia and industry for a long time. Controllers evolved from the classical SISO approach to modern fuzzy or neuro-fuzzy embedded devices with networking capabilities, however PID algorithms are still used in the most industrial control loops. In this paper, we focus on the implementation of a PID controller using mbed NXP LPC1768 development board. This board integrates a powerful ARM Cortex- M3 core and has networking capabilities. The implemented controller can be remotely operated by using an Internet connection and a standard Web browser. The main advantages of the proposed embedded system are customizability, easy operation and very low power consumption. The experimental results obtained by using a simulated process are analysed and shows that the implementation can be done with success in industrial applications.

  11. Clinical evaluation of the use of a multifunctional remotely controlled insulin pump: multicenter observational study.

    Boizel, Robert; Pinget, Michel; Lachgar, Karim; Parkin, Christopher G; Grulet, Hervé; Guillon-Metz, Françoise; Weissmann, Joerg


    Current insulin pumps now feature advanced functions for calculating insulin dosages, delivering insulin and analyzing data, however, the perceived usefulness of these functions in clinical settings has not been well studied. We assessed the use and patient perceptions of an insulin delivery system (Accu-Chek® Combo, Roche Diagnostics, Mannheim, Germany) that combines an insulin pump and a handheld multifunctional blood glucose meter with integrated remote control functions. This prospective, observational, multicenter study enrolled 74 type 1 diabetes patients within 13 weeks after starting use of the pump system. At 4 to 24 weeks, investigators collected usage data from the latest 14-day period. Seventy-two patients completed the evaluation, aged 39 ± 15 years, diabetes duration 16 ± 13 years, HbA1c 8.3 ± 1.6%. At follow-up, 62 (86.1%) patients used the remote control for ≥50% of all boluses, 20 (27.8%) used the bolus advisor for ≥50% of all boluses, and 42 (58.3%) viewed at least 1 of the e-logbook reports. More than 95% of users appraised the functions as easy-to-use and useful; median scores from VAS (0 = useless to 100 = indispensable) ranged from 72 to 85. A high percentage of study patients used the system's advanced features, especially the remote control feature for bolusing. Overall, patients assessed the functions as useful and easy to use. Results support the implementation of these smart capabilities in further insulin pump developments. © 2014 Diabetes Technology Society.

  12. Cutting assembly

    Racki, Daniel J.; Swenson, Clark E.; Bencloski, William A.; Wineman, Arthur L.


    A cutting apparatus includes a support table mounted for movement toward and away from a workpiece and carrying a mirror which directs a cutting laser beam onto the workpiece. A carrier is rotatably and pivotally mounted on the support table between the mirror and workpiece and supports a conduit discharging gas toward the point of impingement of the laser beam on the workpiece. Means are provided for rotating the carrier relative to the support table to place the gas discharging conduit in the proper positions for cuts made in different directions on the workpiece.

  13. Bone cutting.

    Giraud, J Y; Villemin, S; Darmana, R; Cahuzac, J P; Autefage, A; Morucci, J P


    Bone cutting has always been a problem for surgeons because bone is a hard living material, and many osteotomes are still very crude tools. Technical improvement of these surgical tools has first been their motorization. Studies of the bone cutting process have indicated better features for conventional tools. Several non-conventional osteotomes, particularly ultrasonic osteotomes are described. Some studies on the possible use of lasers for bone cutting are also reported. Use of a pressurised water jet is also briefly examined. Despite their advantages, non-conventional tools still require improvement if they are to be used by surgeons.

  14. Convergence Analysis of Wireless Remote Iterative Learning Control Systems with Dropout Compensation

    Li-xun Huang


    Full Text Available The wireless remote iterative learning control (ILC system with random data dropouts is considered. The data dropout is viewed as a binary switching sequence which obeys the Bernoulli distribution. In order to eliminate the effect of data dropouts on the convergence property of output error, the signal at the same time with the lost one but in the last iteration is used to compensate the data dropout at the actuator. With the dropout compensation, the convergence property of output error is analyzed by studying the element values of system transition matrix. Finally, some simulation results are given to illustrate the validity of the proposed method.

  15. Controlled remote preparation of an arbitrary four-qubit cluster-type state

    Chen, Wei-Lin; Ma, Song-Ya; Qu, Zhi-Guo


    Two schemes are proposed to realize the controlled remote preparation of an arbitrary four-qubit cluster-type state via a partially entangled channel. We construct ingenious measurement bases at the sender’s and the controller’s locations, which play a decisive role in the proposed schemes. The success probabilities can reach 50% and 100%, respectively. Compared with the previous proposals, the success probabilities are independent of the coefficients of the entangled channel. Project supported by the National Natural Science Foundation of China (Grant Nos. 61201253, 61373131, 61572246, and 61502147), PAPD and CICAEET funds.

  16. Development of a remote controlled robot system for monitoring nuclear power plant

    Woo, Hee Gon; Song, Myung Jae; Shin, Hyun Bum; Oh, Gil Hwan; Maeng, Sung Jun; Choi, Byung Jae; Chang, Tae Woo [Korea Electric Power Research Institute, Taejon (Korea, Republic of); Lee, Bum Hee; Yoo, Jun; Choi, Myung Hwan; Go, Nak Yong; Lee, Kee Dong; Lee, Young Dae; Cho, Hae Kyeng; Nam, Yoon Suk [Electric and Science Research Center, (Korea, Republic of)


    It`s a final report of the development of remote controlled robot system for monitoring the facilities in nuclear power plant and contains as follows, -Studying the technologies in robot developments and analysing the requirements and working environments - Development of the test mobile robot system - Development of the mobile-robot - Development of the Mounted system on the Mobile robot - Development of the Monitoring system - Mobil-robot applications and future study. In this study we built the basic technologies and schemes for future robot developments and applications. (author). 20 refs., figs.

  17. STS-41 Discovery, OV-103, KSC liftoff from a remote control tracking device


    STS-41 Discovery, Orbiter Vehicle (OV) 103, riding atop the external tank (ET), begins its roll maneuver after lifting off from the Kennedy Space Center (KSC) Launch Complex (LC) Pad 39 at 7:47 am (Eastern Daylight Time (EDT)). Exhaust plumes billow from the solid rocket booster (SRB) skirts. The glow of the three space shuttle main engines (SSMEs) is visible. This photo was taken by a remote control tracking device mounted 1600 feet from epicenter and looks from the bottom of the ET to OV-103's nose.

  18. The Design and Implementation of the Remote Centralized-Monitoring System of Well-Control Equipment Based on RFID Technique

    Luo Bin


    Full Text Available At present, in domestic for the management of well control equipment continue to the traditional way of nameplates identifies and paper-based registration, there are many issues like the separation of data information of device, easy lose, difficult query, confused management and many other problems, which will make the problem device into the well field, and then resulting in well control runaway drilling accident. To solve the above problems, this paper put forward to the integrated remote centralized-monitoring management mode of the well-control equipment. Taking the advantages of IOT technology, adopting the RFID technology, and combining with the remote transmission, this paper designs the remote centralized-monitoring system of well-control equipment based on RFID, which realizes the intelligent management of well-control equipment and meets the actual demand of the well-control equipment safe use and timely scheduling, and it has the ability of field application.

  19. Keyboard before Head Tracking Depresses User Success in Remote Camera Control

    Zhu, Dingyun; Gedeon, Tom; Taylor, Ken

    In remote mining, operators of complex machinery have more tasks or devices to control than they have hands. For example, operating a rock breaker requires two handed joystick control to position and fire the jackhammer, leaving the camera control to either automatic control or require the operator to switch between controls. We modelled such a teleoperated setting by performing experiments using a simple physical game analogue, being a half size table soccer game with two handles. The complex camera angles of the mining application were modelled by obscuring the direct view of the play area and the use of a Pan-Tilt-Zoom (PTZ) camera. The camera control was via either a keyboard or via head tracking using two different sets of head gestures called “head motion” and “head flicking” for turning camera motion on/off. Our results show that the head motion control was able to provide a comparable performance to using a keyboard, while head flicking was significantly worse. In addition, the sequence of use of the three control methods is highly significant. It appears that use of the keyboard first depresses successful use of the head tracking methods, with significantly better results when one of the head tracking methods was used first. Analysis of the qualitative survey data collected supports that the worst (by performance) method was disliked by participants. Surprisingly, use of that worst method as the first control method significantly enhanced performance using the other two control methods.

  20. International Space Station alpha remote manipulator system workstation controls test report

    Ehrenstrom, William A.; Swaney, Colin; Forrester, Patrick


    Previous development testing for the space station remote manipulator system workstation controls determined the need for hardware controls for the emergency stop, brakes on/off, and some camera functions. This report documents the results of an evaluation to further determine control implementation requirements, requested by the Canadian Space Agency (CSA), to close outstanding review item discrepancies. This test was conducted at the Johnson Space Center's Space Station Mockup and Trainer Facility in Houston, Texas, with nine NASA astronauts and one CSA astronaut as operators. This test evaluated camera iris and focus, back-up drive, latching end effector release, and autosequence controls using several types of hardware and software implementations. Recommendations resulting from the testing included providing guarded hardware buttons to prevent accidental actuation, providing autosequence controls and back-up drive controls on a dedicated hardware control panel, and that 'latch on/latch off', or on-screen software, controls not be considered. Generally, the operators preferred hardware controls although other control implementations were acceptable. The results of this evaluation will be used along with further testing to define specific requirements for the workstation design.

  1. Multiple node remote messaging

    Blumrich, Matthias A. (Ridgefield, CT); Chen, Dong (Croton on Hudson, NY); Gara, Alan G. (Mount Kisco, NY); Giampapa, Mark E. (Irvington, NY); Heidelberger, Philip (Cortlandt Manor, NY); Ohmacht, Martin (Yorktown Heights, NY); Salapura, Valentina (Chappaqua, NY); Steinmacher-Burow, Burkhard (Esslingen, DE); Vranas, Pavlos (Danville, CA)


    A method for passing remote messages in a parallel computer system formed as a network of interconnected compute nodes includes that a first compute node (A) sends a single remote message to a remote second compute node (B) in order to control the remote second compute node (B) to send at least one remote message. The method includes various steps including controlling a DMA engine at first compute node (A) to prepare the single remote message to include a first message descriptor and at least one remote message descriptor for controlling the remote second compute node (B) to send at least one remote message, including putting the first message descriptor into an injection FIFO at the first compute node (A) and sending the single remote message and the at least one remote message descriptor to the second compute node (B).

  2. Remote Synchronization Experiments for Quasi-Zenith Satellite System Using Multiple Navigation Signals as Feedback Control

    Toshiaki Iwata


    Full Text Available The remote synchronization system for the onboard crystal oscillator (RESSOX is a remote control method that permits synchronization between a ground station atomic clock and Japanese quasi-zenith satellite system (QZSS crystal oscillators. To realize the RESSOX of the QZSS, the utilization of navigation signals of QZSS for feedback control is an important issue. Since QZSS transmits seven navigation signals (L1C/A, L1CP, L1CD, L2CM, L2CL, L5Q, and L5I, all combinations of these signals should be evaluated. First, the RESSOX algorithm will be introduced. Next, experimental performance will be demonstrated. If only a single signal is available, ionospheric delay should be input from external measurements. If multiple frequency signals are available, any combination, except for L2 and L5, gives good performance with synchronization error being within two nanoseconds that of RESSOX. The combination of L1CD and L5Q gives the best synchronization performance (synchronization error within 1.14 ns. Finally, in the discussion, comparisons of long-duration performance, computer simulation, and sampling number used in feedback control are considered. Although experimental results do not correspond to the simulation results, the tendencies are similar. For the overlapping Allan deviation of long duration, the stability of 1.23×10−14 at 100,160 s is obtained.

  3. Is there a place for crystalloids and colloids in remote damage control resuscitation?

    Medby, Christian


    Crystalloids and colloids are used in prehospital fluid resuscitation to replace blood loss and preserve tissue perfusion until definite surgical control of bleeding can be achieved. However, large volumes of fluids will increase bleeding by elevating blood pressure, dislodging blood clots, and diluting coagulation factors and platelets. Hypotensive fluid resuscitation strategies are used to avoid worsening of uncontrolled bleeding. This is largely supported by animal studies. Most clinical evidence suggests that restricting fluid therapy is associated with improved outcome. Remote damage control resuscitation emphasizes the early use of blood products and restriction of other fluids to support coagulation and tissue oxygenation. Controversy regarding the optimal choice and composition of resuscitation fluids is ongoing. Compared with crystalloids, less colloid is needed for the same expansion of intravascular volume. On the other hand, colloids may cause coagulopathy not only related to dilution. The most important advantage of using colloids is logistical because less volume and weight are needed. In conclusion, prehospital fluid resuscitation is considered the standard of care, but there is little clinical evidence supporting the use of either crystalloids or colloids in remote damage control resuscitation. Alternative resuscitation fluids are needed.

  4. The remote supervisory and controlling experiment system of traditional Chinese medicine production based on Fieldbus

    Zhan, Jinliang; Lu, Pei


    Since the quality of traditional Chinese medicine products are affected by raw material, machining and many other factors, it is difficult for traditional Chinese medicine production process especially the extracting process to ensure the steady and homogeneous quality. At the same time, there exist some quality control blind spots due to lacking on-line quality detection means. But if infrared spectrum analysis technology was used in traditional Chinese medicine production process on the basis of off-line analysis to real-time detect the quality of semi-manufactured goods and to be assisted by advanced automatic control technique, the steady and homogeneous quality can be obtained. It can be seen that the on-line detection of extracting process plays an important role in the development of Chinese patent medicines industry. In this paper, the design and implement of a traditional Chinese medicine extracting process monitoring experiment system which is based on PROFIBUS-DP field bus, OPC, and Internet technology is introduced. The system integrates intelligence node which gathering data, superior sub-system which achieving figure configuration and remote supervisory, during the process of traditional Chinese medicine production, monitors the temperature parameter, pressure parameter, quality parameter etc. And it can be controlled by the remote nodes in the VPN (Visual Private Network). Experiment and application do have proved that the system can reach the anticipation effect fully, and with the merits of operational stability, real-time, reliable, convenient and simple manipulation and so on.

  5. Design and Validation of Wind Turbine’s Power Simulation by Remote Controlled Motor

    A. K. Azad


    Full Text Available The study presents the statistical analysis of wind data at different location of Bangladesh over a period of years. The data has been shorted in sequence of appropriate frequency as hourly, daily and monthly mean wind speed. Two important parameters like Weibull’s shape factor “k” and Weibul’sl scale factor “c” have been obtained from the data. Weibull’s function F(v, Weibull’s probability density function f(v, and available power in the wind (w/m2 have alsobeen obtained from the wind data. Then a horizontal axis wind turbine has been designed for the selected site. For the simulation of power in replaced of designed wind turbine a remote controlled motor has been coupled with a generator. The motor speed has been controlled by PWM signal in its ten steps. Couple microcontrollers have been used for the simulation. High radio frequency remote have been designed to control the motor. At any step, the motor RPM, generator output voltage and switch position have been digitally displayed in the LCDdisplay screen.

  6. Quantum correlations responsible for remote state creation: strong and weak control parameters

    Doronin, S. I.; Zenchuk, A. I.


    We study the quantum correlations between the two remote qubits (sender and receiver) connected by the transmission line (homogeneous spin-1/2 chain) depending on the parameters of the sender's and receiver's initial states (control parameters). We consider two different measures of quantum correlations: the entanglement (a traditional measure) and the informational correlation (based on the parameter exchange between the sender and receiver). We find the domain in the control parameter space yielding (i) zero entanglement between the sender and receiver during the whole evolution period and (ii) non-vanishing informational correlation between the sender and receiver, thus showing that the informational correlation is responsible for the remote state creation. Among the control parameters, there are the strong parameters (which strongly effect the values of studied measures) and the weak ones (whose effect is negligible), therewith the eigenvalues of the initial state are given a privileged role. We also show that the problem of small entanglement (concurrence) in quantum information processing is similar (in certain sense) to the problem of small determinants in linear algebra. A particular model of 40-node spin-1/2 communication line is presented.

  7. A comparison of remote therapy, face to face therapy and an attention control intervention for people with aphasia: a quasi-randomised controlled feasibility study.

    Woolf, Celia; Caute, Anna; Haigh, Zula; Galliers, Julia; Wilson, Stephanie; Kessie, Awurabena; Hirani, Shashi; Hegarty, Barbara; Marshall, Jane


    To test the feasibility of a randomised controlled trial comparing face to face and remotely delivered word finding therapy for people with aphasia. A quasi-randomised controlled feasibility study comparing remote therapy delivered from a University lab, remote therapy delivered from a clinical site, face to face therapy and an attention control condition. A University lab and NHS outpatient service. Twenty-one people with aphasia following left hemisphere stroke. Eight sessions of word finding therapy, delivered either face to face or remotely, were compared to an attention control condition comprising eight sessions of remotely delivered supported conversation. The remote conditions used mainstream video conferencing technology. Feasibility was assessed by recruitment and attrition rates, participant observations and interviews, and treatment fidelity checking. Effects of therapy on word retrieval were assessed by tests of picture naming and naming in conversation. Twenty-one participants were recruited over 17 months, with one lost at baseline. Compliance and satisfaction with the intervention was good. Treatment fidelity was high for both remote and face to face delivery (1251/1421 therapist behaviours were compliant with the protocol). Participants who received therapy improved on picture naming significantly more than controls (mean numerical gains: 20.2 (remote from University); 41 (remote from clinical site); 30.8 (face to face); 5.8 (attention control); P <.001). There were no significant differences between groups in the assessment of conversation. Word finding therapy can be delivered via mainstream internet video conferencing. Therapy improved picture naming, but not naming in conversation. © The Author(s) 2015.

  8. 硬泡棉鞋垫斜边专用数控切削设备的研制%The develop on exclusive numerical control cutting machine for cutting the hypotenuse of hard foam insole

    王晶; 刘晓丽; 吴上生


    研究了硬泡棉鞋垫斜边专用数控切削设备的工作原理、机械结构和控制系统软硬件结构,介绍了用AutoCAD绘制硬泡棉鞋垫轮廓曲线并提取坐标点的方法,研究了用PLC控制二维数控平台实现鞋垫斜边平面曲线的方法,论文研究了用Z轴电机控制刀具切削方向以切削出硬泡棉鞋垫均匀光滑斜边的方法.%The paper studied the special hard foam insole bevel cutting device working principle,mechanical structure and control system hardware and software structure, introduced with the AutoCAD drawing and hard foam insoles contour extraction method coordinates to study the use of PLC control of two- dimensional numerical platform insole hypotenuse plane curve methods. The paper studies the use of Z - axis motor control the direction of cutting tool to cut out the hypotenuse of a hard foam insole smooth uniform way.

  9. Highly stretchable and shape-controllable three-dimensional antenna fabricated by “Cut-Transfer-Release” method

    Yan, Zhuocheng; Pan, Taisong; Yao, Guang; Liao, Feiyi; Huang, Zhenlong; Zhang, Hulin; Gao, Min; Zhang, Yin; Lin, Yuan


    Recent progresses on the Kirigami-inspired method provide a new idea to assemble three-dimensional (3D) functional structures with conventional materials by releasing the prestrained elastomeric substrates. In this paper, highly stretchable serpentine-like antenna is fabricated by a simple and quick “Cut-Transfer-Release” method for assembling stretchable 3D functional structures on an elastomeric substrate with a controlled shape. The mechanical reliability of the serpentine-like 3D stretchable antenna is evaluated by the finite element method and experiments. The antenna shows consistent radio frequency performance with center frequency at 5.6 GHz during stretching up to 200%. The 3D structure is also able to eliminate the hand effect observed commonly in the conventional antenna. This work is expected to spur the applications of novel 3D structures in the stretchable electronics.

  10. Highly stretchable and shape-controllable three-dimensional antenna fabricated by “Cut-Transfer-Release” method

    Yan, Zhuocheng; Pan, Taisong; Yao, Guang; Liao, Feiyi; Huang, Zhenlong; Zhang, Hulin; Gao, Min; Zhang, Yin; Lin, Yuan


    Recent progresses on the Kirigami-inspired method provide a new idea to assemble three-dimensional (3D) functional structures with conventional materials by releasing the prestrained elastomeric substrates. In this paper, highly stretchable serpentine-like antenna is fabricated by a simple and quick “Cut-Transfer-Release” method for assembling stretchable 3D functional structures on an elastomeric substrate with a controlled shape. The mechanical reliability of the serpentine-like 3D stretchable antenna is evaluated by the finite element method and experiments. The antenna shows consistent radio frequency performance with center frequency at 5.6 GHz during stretching up to 200%. The 3D structure is also able to eliminate the hand effect observed commonly in the conventional antenna. This work is expected to spur the applications of novel 3D structures in the stretchable electronics. PMID:28198812

  11. Development of remote-controlled forest machine; Kauko-ohjattavan harvennuskoneen kehittaeminen

    Kerva, J. [VTT Automation, Oulu (Finland); Vesisenaho, T. [Vapo Oy, Jyvaeskylae (Finland)


    The aim of the project is to develop a forest machine for the first thinnings. The machine will be light and it will reduce damages of the ground compared to damages caused by normal forest machines. The machine will be operated by wireless remote controller and the machine will not have any cabin. Anti-slip wheel control system will be used in order to improve driving in forest. Automatic and semi-automatic operations of workboom control will be included in order to make the working with the machine more efficient and easy. Compared to normal size forest machines, the machine developed in the project will offer more economic solution for the first thinnings. (orig.)

  12. A Novel Digital Certificate Based Remote Data Access Control Scheme in WSN

    Wei Liang


    Full Text Available A digital certificate based remote data access control scheme is proposed for safe authentication of accessor in wireless sensor network (WSN. The scheme is founded on the access control scheme on the basis of characteristic expression (named CEB scheme. Data is divided by characteristics and the key for encryption is related to characteristic expression. Only the key matching with characteristic expression can decrypt the data. Meanwhile, three distributed certificate detection methods are designed to prevent the certificate from being misappropriated by hostile anonymous users. When a user starts query, the key access control method can judge whether the query is valid. In this case, the scheme can achieve public certificate of users and effectively protect query privacy as well. The security analysis and experiments show that the proposed scheme is superior in communication overhead, storage overhead, and detection probability.

  13. A remotely-controlled locomotive IC driven by electrolytic bubbles and wireless powering.

    Hsieh, Jian-Yu; Kuo, Po-Hung; Huang, Yi-Chun; Huang, Yu-Jie; Tsai, Rong-Da; Wang, Tao; Chiu, Hung-Wei; Wang, Yao-Hung; Lu, Shey-Shi


    A batteryless remotely-controlled locomotive IC utilizing electrolytic bubbles as propelling force is realized in 0.35 μm CMOS technology. Without any external components, such as magnets and on-board coils, the bare IC is wirelessly powered and controlled by a 10 MHz ASK modulated signal with RS232 control commands to execute movement in four moving directions and with two speeds. The receiving coil and electrolysis electrodes are all integrated on the locomotive chip. The experiment successfully demonstrated that the bare IC moved on the surface of an electrolyte with a speed up to 0.3 mm/s and change moving directions according to the commands. The total power consumptions of the chip are 207.4 μW and 180 μ W while the output electrolysis voltages are 2 V and 1.3 V, respectively.

  14. ZigBee Based Remote Sensing and Controlling with Communication Re-link Algorithm

    Ankita Gupta


    Full Text Available The efficient design and implementation of WSN (Wireless Sensor Networks has become an emerging area of research in recent years. In this paper a wireless remote sensing and controlling system for real time dynamics has been proposed. Variation in the temperature is recorded in the GUI window and proper controlling action is taken accordingly. The choice of automatic as well as manual control has been added to the design. An 8- bit AVR microcontroller has been used to interface the temperature sensor using the IEEE 802.15.4 standard, ZigBee protocol. ZigBee has the characteristics of low power consumption, low cost and self organizing features. A new approach of communication re-link algorithm has been used to ensure reliable transmission of data.

  15. A MultiCenter Pilot Randomized Controlled Trial of Remote Ischemic Preconditioning in Major Vascular Surgery.

    Healy, D A; Boyle, E; McCartan, D; Bourke, M; Medani, M; Ferguson, J; Yagoub, H; Bashar, K; O'Donnell, M; Newell, J; Canning, C; McMonagle, M; Dowdall, J; Cross, S; O'Daly, S; Manning, B; Fulton, G; Kavanagh, E G; Burke, P; Grace, P A; Moloney, M Clarke; Walsh, S R


    A pilot randomized controlled trial that evaluated the effect of remote ischemic preconditioning (RIPC) on clinical outcomes following major vascular surgery was performed. Eligible patients were those scheduled to undergo open abdominal aortic aneurysm repair, endovascular aortic aneurysm repair, carotid endarterectomy, and lower limb revascularization procedures. Patients were randomized to RIPC or to control groups. The primary outcome was a composite clinical end point comprising any of cardiovascular death, myocardial infarction, new-onset arrhythmia, cardiac arrest, congestive cardiac failure, cerebrovascular accident, renal failure requiring renal replacement therapy, mesenteric ischemia, and urgent cardiac revascularization. Secondary outcomes were components of the primary outcome and myocardial injury as assessed by serum troponin values. The primary outcome occurred in 19 (19.2%) of 99 controls and 14 (14.1%) of 99 RIPC group patients (P = .446). There were no significant differences in secondary outcomes. Our trial generated data that will guide future trials. Further trials are urgently needed. © The Author(s) 2015.

  16. Wireless remote control car%无线遥控小车

    黄建能; 杨光杰


    With the rapid development of electronic technology, microcontroller and wireless remote control has been widely applied in daily life and industry, and it has become an important tool to realize modernization of measurement and control technology. The designed wireless remote control car has four parts, including master control module, wireless communication module, motor driver module and power supply module. Master control module takes STC89C52 microcontroller as the processor, and wireless communication module with PT2262 and PT2272 chips realizes the wireless transceiver. L298 chip with two built-in H bridge circuits is used to drive DC motor, which controls the car, and realizes the forward, backward, left-turn, right-turn, acceleration and deceleration of the car. The wireless remote control car system has many advantages of small size, low cost, simple operation and so on, and it has a certain degree of scalability.%随着电子技术的飞速发展,单片机与无线遥控已被广泛的应用到日常生活及工业中,成为测控技术现代化必不可少的重要工具.设计的无线遥控小车由四部分组成:主控模块、无线通信模块、电机驱动模块和电源模块.主控模块采用STC89C52单片机作为处理器;无线通信模块采用芯片PT2262和PT2272实现无线收发;用内置两个H桥的L298芯片驱动直流电机实现对小车的控制,实现前进、后退,左转、右转以及加速、减速的动作.整个无线遥控小车系统具有体积小、成本低、操作简单等优点,并具有一定的可扩展性.

  17. Characteristics of machined surface controlled by cutting tools and conditions in machining of brittle material

    Yong-Woo KIM; Soo-Chang CHOI; Jeung-Woo PARK; Deug-Woo LEE


    One of the ultra-precision machining methods was adapted for brittle material as well as soft material by using multi-arrayed diamond tips and high speed spindle. Conventional machining method is too hard to control surface roughness and surface texture against brittle material because the particles of grinding tools are irregular size and material can be fragile. Therefore, we were able to design tool paths and machine controlled pattern on surface by multi-arrayed diamond tips with uniform size made in MEMS fabrication and high speed spindle, and the maximum speed was about 3×105 r/min. We defined several parameters that can affect the machining surface. Those were multi-array of diamond tips (n×n), speed of air spindle and feeding rate. The surface roughness and surface texture can be controlled by those parameters for micro machining.

  18. Development of Remote Monitoring and a Control System Based on PLC and WebAccess for Learning Mechatronics

    Wen-Jye Shyr


    Full Text Available This study develops a novel method for learning mechatronics using remote monitoring and control, based on a programmable logic controller (PLC and WebAccess. A mechatronics module, a Web‐CAM and a PLC were integrated with WebAccess software to organize a remote laboratory. The proposed system enables users to access the Internet for remote monitoring and control of the mechatronics module via a web browser, thereby enhancing work flexibility by enabling personnel to control mechatronics equipment from a remote location. Mechatronics control and long‐distance monitoring were realized by establishing communication between the PLC and WebAccess. Analytical results indicate that the proposed system is feasible. The suitability of this system is demonstrated in the department of industrial education and technology at National Changhua University of Education, Taiwan. Preliminary evaluation of the system was encouraging and has shown that it has achieved success in helping students understand concepts and master remote monitoring and control techniques.

  19. GSM Web-Based Centralized Remote Wireless Automatic Controlling and Monitoring of Aquafeeder

    Wong, C. L.; Idris, A.; Hasan, Z.


    This project is about producing a prototype to feed fishes at fish ponds of remote location with the use of GSM mobile phone. An automatic fish feeder is an electric device that has been designed to give out the right amount of pellets at the designed time. In this project, the automatic feeder designed consists of photovoltaic solar cells that are used to generate electricity and storing it into batteries. Solar charge controllers can be used to determine the rate of which current is drawn and added from the batteries. GSM cellular communication is used to allow user to control from a distance. Commands or instructions are sent to the operating system which in return runs the servomotor and blower by blowing certain amount of fish pallets into the pond to feed the fishes. The duration of the feeding processes is fixed by the user, hence the amount of fish food pallets released are precisely the same for each time. This technology is especially useful for fish farmers where they can remotely feed their fishes.

  20. Development of a Remotely Controlled Testing Platform with Low-drag Air-ventilated Hull

    Konstantin I. Matveev; Nicholaus I. Perry; Alexander W. Mattson; Christopher S. Chaney


    This paper addresses the development and testing of a remotely controlled boat platform with an innovative air-ventilated hull. The application of air cavities on the underside of ship hulls is a promising means for reducing hydrodynamic drag and pollutant emissions and increasing marine transportation efficiency. Despite this concept’s potential, design optimization and high-performance operation of novel air-cavity ships remain a challenging problem. Hull construction and sensor instrumentation of the model-scale air-cavity boat is described in the paper. The modular structure of the hull allows for easy modifications, and an electric propulsion unit enables self-propelled operation. The boat is controlled remotely via a radio transmission system. Results of initial tests are reported, including thrust, speed, and airflow rate in several loading conditions. The constructed platform can be used for optimizing air-cavity systems and testing other innovative hull designs. This system can be also developed into a high-performance unmanned boat.

  1. Perfect controlled joint remote state preparation independent of entanglement degree of the quantum channel

    An, Nguyen Ba, E-mail:; Bich, Cao Thi


    We construct a quantum circuit to produce a task-oriented partially entangled state and use it as the quantum channel for controlled joint remote state preparation. Unlike most previous works, where the parameters of the quantum channel are given to the receiver who can accomplish the task only probabilistically by consuming auxiliary resource, operation and measurement, here we give them to the supervisor. Thanks to the knowledge of the task-oriented quantum channel parameters, the supervisor can carry out proper complete projective measurement, which, combined with the feed-forward technique adapted by the preparers, not only much economizes (simplifies) the receiver's resource (operation) but also yields unit total success probability. Notably, such apparent perfection does not depend on the entanglement degree of the shared quantum channel. Our protocol is within the reach of current quantum technologies. - Highlights: • Controlled joint remote state preparation is considered. • Quantum circuit is proposed to produce task-oriented partially entangled channel. • The quantum channel parameter is given to the supervisor (not to the receiver). • Unit success probability without additional resource/operations/measurement. • Perfection is achieved regardless of the shared entanglement degree.

  2. Miniaturized Swimming Soft Robot with Complex Movement Actuated and Controlled by Remote Light Signals

    Huang, Chaolei; Lv, Jiu-An; Tian, Xiaojun; Wang, Yuechao; Yu, Yanlei; Liu, Jie


    Powering and communication with micro robots to enable complex functions is a long-standing challenge as the size of robots continues to shrink. Physical connection of wires or components needed for wireless communication are complex and limited by the size of electronic and energy storage devices, making miniaturization of robots difficult. To explore an alternative solution, we designed and fabricated a micro soft swimming robot with both powering and controlling functions provided by remote light, which does not carry any electronic devices and batteries. In this approach, a polymer film containing azobenzene chromophore which is sensitive to ultra-violet (UV) light works as “motor”, and the UV light and visible light work as “power and signal lines”. Periodically flashing UV light and white light drives the robot flagellum periodically to swing to eventually push forward the robot in the glass tube filled with liquid. The gripper on robot head can be opened or closed by lights to grab and carry the load. This kind of remotely light-driven approach realizes complex driving and controlling of micro robotic structures, making it possible to design and fabricate even smaller robots. It will have great potential among applications in the micro machine and robot fields.

  3. Automatic quality control in the production of ceramic substrates by pulsed laser cutting

    Morace, Renate Erica; Hansen, Hans Nørgaard; De Chiffre, Leonardo


    This paper deals with the use of optical coordinate measuring machines (CMMs) in the quality control of ceramic substrates produced by a CO2 pulsed laser. A procedure of automatic measurements on a CMM equipped with a CCD camera was developed. In particular, the number and the distribution...

  4. Object-based task-level control: A hierarchical control architecture for remote operation of space robots

    Stevens, H. D.; Miles, E. S.; Rock, S. J.; Cannon, R. H.


    Expanding man's presence in space requires capable, dexterous robots capable of being controlled from the Earth. Traditional 'hand-in-glove' control paradigms require the human operator to directly control virtually every aspect of the robot's operation. While the human provides excellent judgment and perception, human interaction is limited by low bandwidth, delayed communications. These delays make 'hand-in-glove' operation from Earth impractical. In order to alleviate many of the problems inherent to remote operation, Stanford University's Aerospace Robotics Laboratory (ARL) has developed the Object-Based Task-Level Control architecture. Object-Based Task-Level Control (OBTLC) removes the burden of teleoperation from the human operator and enables execution of tasks not possible with current techniques. OBTLC is a hierarchical approach to control where the human operator is able to specify high-level, object-related tasks through an intuitive graphical user interface. Infrequent task-level command replace constant joystick operations, eliminating communications bandwidth and time delay problems. The details of robot control and task execution are handled entirely by the robot and computer control system. The ARL has implemented the OBTLC architecture on a set of Free-Flying Space Robots. The capability of the OBTLC architecture has been demonstrated by controlling the ARL Free-Flying Space Robots from NASA Ames Research Center.


    F.A. Ali


    Full Text Available Remotely Operated Vehicles are underwater robots designed specifically for surveillance, monitoring and collecting data for underwater activities. In the underwater vehicle industries, the thruster is an important part in controlling the direction, depth and speed of the ROV. However, there are some ROVs that cannot be maintained at the specified depth for a long time because of disturbance. This paper proposes an auto depth control using a thruster system. A prototype of a thruster with an auto depth control is developed and attached to the previously fabricated UTeM ROV. This paper presents the operation of auto depth control as well as thrusters for submerging and emerging purposes and maintaining the specified depth. The thruster system utilizes a microcontroller as its brain, a piezoresistive strain gauge pressure sensor and a DC brushless motor to run the propeller. Performance analysis of the auto depth control system is conducted to identify the sensitivity of the pressure sensor, and the accuracy and stability of the system. The results show that the thruster system performs well in maintaining a specified depth as well as stabilizing itself when a disturbanceoccurs even with a simple proportional controller used to control the thruster, where the thruster is an important component of the ROV.

  6. Cost effective malaria risk control using remote sensing and environmental data

    Rahman, Md. Z.; Roytman, Leonid; Kadik, Abdel Hamid


    Malaria transmission in many part of the world specifically in Bangladesh and southern African countries is unstable and epidemic. An estimate of over a million cases is reported annually. Malaria is heterogeneous, potentially due to variations in ecological settings, socio-economic status, land cover, and agricultural practices. Malaria control only relies on treatment and supply of bed networks. Drug resistance to these diseases is widespread. Vector control is minimal. Malaria control in those countries faces many formidable challenges such as inadequate accessibility to effective treatment, lack of trained manpower, inaccessibility of endemic areas, poverty, lack of education, poor health infrastructure and low health budgets. Health facilities for malaria management are limited, surveillance is inadequate, and vector control is insufficient. Control can only be successful if the right methods are used at the right time in the right place. This paper aims to improve malaria control by developing malaria risk maps and risk models using satellite remote sensing data by identifying, assessing, and mapping determinants of malaria associated with environmental, socio-economic, malaria control, and agricultural factors.

  7. Modelling for registration of remotely sensed imagery when reference control points contain error

    GE; Yong; Leung; Yee; MA; Jianghong; WANG; Jinfeng


    Reference control points (RCPs) used in establishing the regression model in the registration or geometric correction of remote sensing images are generally assumed to be "perfect". That is, the RCPs, as explanatory variables in the regression equation, are accurate and the coordinates of their locations have no errors. Thus ordinary least squares (OLS) estimator has been applied extensively to the registration or geometric correction of remotely sensed data. However, this assumption is often invalid in practice because RCPs always contain errors. Moreover, the errors are actually one of the main sources which lower the accuracy of geometric correction of an uncorrected image. Under this situation, the OLS estimator is biased. It cannot handle explanatory variables with errors and cannot propagate appropriately errors from the RCPs to the corrected image. Therefore, it is essential to develop new feasible methods to overcome such a problem. This paper introduces a consistent adjusted least squares (CALS) estimator and proposes relaxed consistent adjusted least squares (RCALS) estimator, with the latter being more general and flexible, for geometric correction or registration. These estimators have good capability in correcting errors contained in the RCPs, and in propagating appropriately errors of the RCPs to the corrected image with and without prior information.The objective of the CALS and proposed RCALS estimators is to improve the accuracy of measurement value by weakening the measurement errors. The conceptual arguments are substantiated by a real remotely sensed data. Compared to the OLS estimator, the CALS and RCALS estimators give a superior overall performance in estimating the regression coefficients and variance of measurement errors.

  8. An integrated system to remote monitor and control anaerobic wastewater treatment plants through the internet.

    Bernard, O; Chachuat, B; Hélias, A; Le Dantec, B; Sialve, B; Steyer, J-P; Lardon, L; Neveu, P; Lambert, S; Gallop, J; Dixon, M; Ratini, P; Quintabà, A; Frattesi, S; Lema, J M; Roca, E; Ruiz, G; Rodriguez, J; Franco, A; Vanrolleghem, P; Zaher, U; De Pauw, D J W; De Neve, K; Lievens, K; Dochaine, D; Schoefs, O; Fibrianto, H; Farina, R; Alcaraz Gonzalez, V; Gonzalez Alvarez, V; Lemaire, P; Martinez, J A; Esandi, F; Duclaud, O; Lavigne, J F


    The TELEMAC project brings new methodologies from the Information and Science Technologies field to the world of water treatment. TELEMAC offers an advanced remote management system which adapts to most of the anaerobic wastewater treatment plants that do not benefit from a local expert in wastewater treatment. The TELEMAC system takes advantage of new sensors to better monitor the process dynamics and to run automatic controllers that stabilise the treatment plant, meet the depollution requirements and provide a biogas quality suitable for cogeneration. If the automatic system detects a failure which cannot be solved automatically or locally by a technician, then an expert from the TELEMAC Control Centre is contacted via the internet and manages the problem.

  9. Real-time remote control of artificial cilia actuation using fingertip drawing for efficient micromixing.

    Chen, Chia-Yuan; Yao, Chih-Yuan; Lin, Cheng-Yi; Hung, Shih-Hsuan


    Low-efficiency diffusion mechanism poses a significant barrier to the enhancement of micromixing efficiency in microfluidics. Actuating artificial cilia to increase the contact area of two flow streams during micromixing provides a promising alternative to enhance the mixing performance. Real-time adjustment of beating behavior in artificial cilia is necessary to accommodate various biological/chemical reagents with different hydrodynamic properties that are processed in a single microfluidic platform during micromixing. Equipping the microfluidic device with a self-troubleshooting feature for the end user, such as a bubble removal function during the process of multiple chemical solution injections, is also essential for robust micromixing. To meet these requirements, we initiated a new beating control concept by controlling the beating behavior of the artificial cilia through remote and simultaneous actuation of human fingertip drawing. A series of micromixing test cases under extreme flow conditions (Re technical difficulties encountered during micromixing operations.

  10. Making Vehicles Remote Controlled for Special People using AT89c51

    Mansoor Habib


    Full Text Available The purpose of this paper is to present a novel technique to implement remote controlled driving option in to existing cars whether they are new cars equipped with state of the art electronic control units or the good old fashioned cars relying solely on mechanical inputs and outputs. The technique used is devised in such a way that people with disabilities will benefit completely from it while the normal people will also enjoy great benefits from it. In addition to support for both new and old cars the proposed system is very cheap and anyone can afford it. The main purpose of this work is to provide a cheap and reliable system for people with disabilities to drive car on their own without any aid from anyone else

  11. Remote Control of Cellular Functions: The Role of Smart Nanomaterials in the Medicine of the Future.

    Genchi, Giada Graziana; Marino, Attilio; Grillone, Agostina; Pezzini, Ilaria; Ciofani, Gianni


    The remote control of cellular functions through smart nanomaterials represents a biomanipulation approach with unprecedented potential applications in many fields of medicine, ranging from cancer therapy to tissue engineering. By actively responding to external stimuli, smart nanomaterials act as real nanotransducers able to mediate and/or convert different forms of energy into both physical and chemical cues, fostering specific cell behaviors. This report describes those classes of nanomaterials that have mostly paved the way to a "wireless" control of biological phenomena, focusing the discussion on some examples close to the clinical practice. In particular, magnetic fields, light irradiation, ultrasound, and pH will be presented as means to manipulate the cellular fate, due to the peculiar physical/chemical properties of some smart nanoparticles, thus providing realistic examples of "nanorobots" approaching the visionary ideas of Richard Feynman. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  12. The applications of the remote control of the manipulation in manned space exploration

    Deutsche, S.; Malone, T. B.


    The teleoperator system incorporates many of the advantages of manned systems on the one hand, and mechanical systems on the other. Since man is always in the control loop of a teleoperator system, the system is provided the decision making and adaptive intelligence capabilities which are uniquely human. Conversely, since the actual work is performed by the remotely controlled device, the system incorporates the durability, strength, and the expendable nature of a machine. Use of a teleoperator system is generally safer than placing the man at the worksite, and is generally more flexible and adaptable than an automated mechanical system. Potential earth orbital space missions for teleoperator systems, candidate aerospace teleoperator systems to perform these missions, and the current status of teleoperator technology development within NASA are discussed.

  13. Semi-automated sorting using holographic optical tweezers remotely controlled by eye/hand tracking camera

    Tomori, Zoltan; Keša, Peter; Nikorovič, Matej; Kaůka, Jan; Zemánek, Pavel


    We proposed the improved control software for the holographic optical tweezers (HOT) proper for simple semi-automated sorting. The controller receives data from both the human interface sensors and the HOT microscope camera and processes them. As a result, the new positions of active laser traps are calculated, packed into the network format and sent to the remote HOT. Using the photo-polymerization technique, we created a sorting container consisting of two parallel horizontal walls where one wall contains "gates" representing a place where the trapped particle enters into the container. The positions of particles and gates are obtained by image analysis technique which can be exploited to achieve the higher level of automation. Sorting is documented on computer game simulation and the real experiment.

  14. Long-Term Glycemic Control in Adult Patients Undergoing Remote vs. Local Total Pancreatectomy With Islet Autotransplantation.

    Kesseli, Samuel J; Wagar, Matthew; Jung, Min K; Smith, Kerrington D; Lin, Yu Kuei; Walsh, R Matthew; Hatipoglu, Betul; Freeman, Martin L; Pruett, Timothy L; Beilman, Gregory J; Sutherland, David E R; Dunn, Ty B; Axelrod, David A; Chaidarun, Sushela S; Stevens, Tyler K; Bellin, Melena; Gardner, Timothy B


    Total pancreatectomy with islet autotransplantation (TPIAT) is increasingly performed with remote islet cell processing and preparation, i.e., with islet cell isolation performed remotely from the primary surgical site at an appropriately equipped islet isolation facility. We aimed to determine whether TPIAT using remote islet isolation results in comparable long-term glycemic outcomes compared with TPIAT performed with standard local isolation. We performed a retrospective cohort study of adult patients who underwent TPIAT at three tertiary care centers from 2010 to 2013. Two centers performed remote isolation and one performed local isolation. Explanted pancreata in the remote cohort were transported ∼130 miles to and from islet isolation facilities. The primary outcome was insulin independence 1 year following transplant. Baseline characteristics were similar between groups except the remote cohort had higher preoperative hemoglobin A1c (HbA1c; 5.43 vs. 5.25, P=0.02) and there were more females in the local cohort (58% vs. 76%, P=0.049). At 1 year, 27% of remote and 32% of local patients were insulin independent (P=0.48). Remote patients experienced a greater drop in fasting c-peptide (-1.66 vs. -0.64, P=0.006) and a greater rise in HbA1c (1.65 vs. 0.99, P=0.014) at 1-year follow-up. A preoperative c-peptide >2.7 (odds ratio (OR) 4.4, 95% confidence interval (CI) 1.6-14.3) and >3,000 islet equivalents/kg (OR 11.0, 95% CI 3.2-37.3) were associated with one-year insulin independence in the local group. At 1 year after TPIAT, patients undergoing remote surgery have equivalent rates of long-term insulin independence compared with patients undergoing TPIAT locally, but metabolic control is superior with local isolation.

  15. Remote screening and direct control of the bacterial infection of gardens

    Starodub, Nickolaj F.; Shavanova, Kateryna E.; Son'ko, Roman V.


    In last time gardens are often at the dangerous of viruses and bacteria infections. To preserve not only the coming harvest, but, in generally, to provide stability and growing horticultures the development of new generation of the analytical techniques for remote express screening vegetative state arrays and direct control of the appropriate infection if appearance of its maybe expected on the basis of previous surveys are very actually and important. For continuous monitoring we propose the application of the complex of the optical analytical devices as "Floratest" and "Plasmatest" (both produced in Ukraine) which is able to control step by step general situation with vegetable state and verify concrete situation with infection. General screening is accomplished on the control of the intensity of chlorophyll induction (IChF), namely, registration of so called Kautsky curve which testifies about physiological mechanisms of energy generation, accumulation and effective ways of its realization in cells. The measuring may be done by direct way on the number of individual vegetables and remote screening of massive with transferring registered signal direct in the laboratory. Next step of control connected with the application of the surface plasmon resonance (SPR) based immune biosensor which is able to determine concrete bacteria (for example, Erwinia amilovora) with the limit detection about 0.2 μg/ml, the overall time of the analysis within 30 min (5 min of the duration of one measurement). The traditional ELISA-method showed the sensitivity to this pathogen about 0.5 μg/ml, overall time of the analysis several hours and obligatory using additional expensive reagents.

  16. Remote ischemic preconditioning in percutaneous coronary revascularization: a double-blind randomized controlled clinical trial.

    Ghaemian, Ali; Nouraei, S Mahmoud; Abdollahian, Fatemeh; Naghshvar, Farshad; Giussani, Dino A; Nouraei, S A Reza


    To assess the impact of pre-procedural remote ischemic preconditioning on the incidence of myocardial complications following percutaneous coronary intervention. Ischemic preconditioning of a remote vascular territory improves the subsequent ischemic tolerance of distant organs. The Myocardial Event Reduction with Ischemic Preconditioning Therapy (MERIT) trial recruited 80 consecutive patients undergoing elective angioplasty with drug-eluting stents to receive two 5-min lower limb tourniquet occlusions or an un-inflated tourniquet (controls) 1 h before the procedure. The primary outcome was troponin T level at 24 h. Secondary outcomes were intra-procedural chest pain and ST-segment deviation. 6 patients in the control group and 2 in the ischemic preconditioning group had pre-procedural raised troponin T (p = 0.23). This increased to 16 (40%) in the control group and 5 (12.5%) in the study group at 24 h (p = 0.01). Fewer patients in the study group experienced intra-procedural chest pain (1 vs. 7, p = 0.056). Mean ST-segment deviation time was 13 ± 35 s in the study group and 58 ± 118 s in the control group (p = 0.02). At a mean follow-up of 11 months, the major adverse cardiac event rate did not differ significantly between the groups. These data suggest that ischemic preconditioning reduces the absolute risk of post-procedure cardiomyocyte necrosis by 27.5%, and reduces intra-procedural chest pain and ST-segment deviation in patients undergoing percutaneous coronary interventions. We suggest its routine use in percutaneous coronary intervention, although the long-term prognostic impact in this patient group warrants further investigation.

  17. On the control performance of motors driven by long cables for remote handling at ITER

    Sol, Enrique del, E-mail: [Oxford Technologies Ltd., 7 Nuffield Way, Abingdon OX141RL (United Kingdom); Meek, Richard [Oxford Technologies Ltd., 7 Nuffield Way, Abingdon OX141RL (United Kingdom); Ruiz Morales, Emilio; Vitelli, Ricardo; Esqué, Salvador [Fusion for Energy, Josep Pla, 2, Barcelona 08019 (Spain)


    Highlights: • We show the dangerous effects of reflections on the actuator’s system. • We prove how to solve the reflections issue with a commercial LC filter. • We study the filter influence for short cables on two control modes. • We show the filter performance under a real remote handling operation. • We study the excellent performance of the filter for different cable lengths. - Abstract: Pulse Width Modulation (PWM) is nowadays the most used method for controlling a servo-motor. When combining PWM with motors and long cables, such as the ones that will be found at ITER, the standing waves originated are potentially very harmful for both actuator’s life span and control performance. Several methods have been investigated to cope with this issue, such as the use of chokes, filters, snubbers or active modification of the PWM signal. Of all possible locations where an electrical servo-motor could be used at ITER, the most critical scenario arises when mounting a low power motor, with a low gear ratio, in a dexterous manipulator for bilateral teleoperation. In those circumstances cable lengths of more than 150 m are expected between manipulator and control cubicle. In this paper, the effects of long cables in the system safety are analysed on a custom made test bench. The most common solutions to cope with this issue are analysed and a commercial LC filter is selected for further experimentation. An extensive set of experiments are carried out in order to validate the proposed solution for being used on remote handling equipment at ITER.

  18. Hardware and Software Interfacing at New Mexico Geochronology Research Laboratory: Distributed Control Using Pychron and RemoteControlServer.cs

    McIntosh, W. C.; Ross, J. I.


    We developed a system for interfacing existing hardware and software to two new Thermo Scientific Argus VI mass spectrometers and three Photon Machines Fusions laser systems at New Mexico Geochronology Research Laboratory. NMGRL's upgrade to the new analytical equipment required the design and implementation of a software ecosystem that allows seamless communication between various software and hardware components. Based on past experience and initial testing we choose to pursue a "Fully Distributed Control" model. In this model, hardware is compartmentalized and controlled by customized software running on individual computers. Each computer is connected to a Local Area Network (LAN) facilitating inter-process communication using TCP or UDP Internet Protocols. Two other options for interfacing are 1) Single Control, in which all hardware is controlled by a single application on a single computer and 2), Partial Distributed Control, in which the mass spectrometer is controlled directly by Thermo Scientific's Qtegra and all other hardware is controlled by a separate application. The "Fully Distributed Control" model offers the most efficient use of software resources, leveraging our in-house laboratory software with proprietary third-party applications, such as Qtegra and Mass Spec. Two software products resulted from our efforts. 1) Pychron, a configurable and extensible package for hardware control, data acquisition and preprocessing, and 2) RemoteControlServer.cs, a C# script for Thermo's Qtegra software that implements a TCP/UDP command server. Pychron is written in python and uses standard well-established libraries such as, Numpy, Scipy, and Enthought ETS. Pychron is flexible and extensible, encouraging experimentation and rapid development of new features. A project page for Pychron is located at, featuring an issue tracker and a Version Control System (Mercurial). RemoteControlServer.cs is a simple socket server that listens

  19. Observer-Based Adaptive Neural Network Trajectory Tracking Control for Remotely Operated Vehicle.

    Chu, Zhenzhong; Zhu, Daqi; Yang, Simon X


    This paper focuses on the adaptive trajectory tracking control for a remotely operated vehicle (ROV) with an unknown dynamic model and the unmeasured states. Unlike most previous trajectory tracking control approaches, in this paper, the velocity states and the angular velocity states in the body-fixed frame are unmeasured, and the thrust model is inaccurate. Obviously, it is more in line with the actual ROV systems. Since the dynamic model is unknown, a new local recurrent neural network (local RNN) structure with fast learning speed is proposed for online identification. To estimate the unmeasured states, an adaptive terminal sliding-mode state observer based on the local RNN is proposed, so that the finite-time convergence of the trajectory tracking error can be guaranteed. Considering the problem of inaccurate thrust model, an adaptive scale factor is introduced into thrust model, and the thruster control signal is considered as the input of the trajectory tracking system directly. Based on the local RNN output, the adaptive scale factor, and the state estimation values, an adaptive trajectory tracking control law is constructed. The stability of the trajectory tracking control system is analyzed by the Lyapunov theorem. The effectiveness of the proposed control scheme is illustrated by simulations.

  20. Surveillance and Control of Malaria Transmission in Thailand using Remotely Sensed Meteorological and Environmental Parameters

    Kiang, Richard K.; Adimi, Farida; Soika, Valerii; Nigro, Joseph


    These slides address the use of remote sensing in a public health application. Specifically, this discussion focuses on the of remote sensing to detect larval habitats to predict current and future endemicity and identify key factors that sustain or promote transmission of malaria in a targeted geographic area (Thailand). In the Malaria Modeling and Surveillance Project, which is part of the NASA Applied Sciences Public Health Applications Program, we have been developing techniques to enhance public health's decision capability for malaria risk assessments and controls. The main objectives are: 1) identification of the potential breeding sites for major vector species; 2) implementation of a risk algorithm to predict the occurrence of malaria and its transmission intensity; 3) implementation of a dynamic transmission model to identify the key factors that sustain or intensify malaria transmission. The potential benefits are: 1) increased warning time for public health organizations to respond to malaria outbreaks; 2) optimized utilization of pesticide and chemoprophylaxis; 3) reduced likelihood of pesticide and drug resistance; and 4) reduced damage to environment. !> Environmental parameters important to malaria transmission include temperature, relative humidity, precipitation, and vegetation conditions. The NASA Earth science data sets that have been used for malaria surveillance and risk assessment include AVHRR Pathfinder, TRMM, MODIS, NSIPP, and SIESIP. Textural-contextual classifications are used to identify small larval habitats. Neural network methods are used to model malaria cases as a function of the remotely sensed parameters. Hindcastings based on these environmental parameters have shown good agreement to epidemiological records. Discrete event simulations are used for modeling the detailed interactions among the vector life cycle, sporogonic cycle and human infection cycle, under the explicit influences of selected extrinsic and intrinsic factors

  1. How to optimize solids control economics, efficiency. [Waste management planning for oil and gas well cuttings

    Robinson, L. (International Drilling Consultants, Houston, TX (United States))


    Solids control efficiency can be more effectively managed using calculations that include desired removal efficiency, the amount of drilled solids in the mud discard stream, the targeted drilled solids concentration and the barrels of drilling fluid that must be added for each barrel of solids discarded. The following discussion shows: how dilution is necessary; how too much dilution creates problems with excessive drilling fluid volumes and excessive drilling fluid wastes; how removal efficiencies affect the drilling fluid costs; and how the dryness of the drilled solids affects drilling fluid and drilling waste costs. Three primary variables--dryness of discarded solids, targeted drilled solids concentration in the drilling fluid and removal efficiency--are important in evaluating a rig solids management system. They all play a role in minimizing drilling fluid and drilling waste costs.

  2. Effect of a bacteriophage cocktail in combination with modified atmosphere packaging in controlling Listeria monocytogenes on fresh-cut spinach

    Boyacioglu O.


    Full Text Available A Listeria monocytogenes-specific bacteriophage cocktail was evaluated for its activity against a nalidixic acid-resistant L. monocytogenes (Lm-NalR isolate on fresh-cut spinach stored under modified atmosphere packaging at various temperatures. Pieces (~2 × 2 cm2 of fresh spinach inoculated with 4.5 log CFU/cm2 Lm-NalR were sprayed with the phage cocktail (6.5 log plaque-forming units [PFU]/cm2 or a control. The samples were stored at 4°C or 10°C for up to 14 d in sealed packages filled with either atmospheric air (AA or modified atmosphere (MA. At 4°C under AA, the phages significantly (P ≤ 0.05 lowered the Lm-NalR populations on spinach, compared to control-treated inoculated samples, by 1.12 and 1.51 log CFU/cm2 after 1 and 14 d, respectively. At 4°C under MA, Lm-NalR was significantly reduced by 1.95 log CFU/cm2 compared to control leaves after both 1 and 14 d. At 10°C under AA, the phages significantly reduced Lm-NalR by 1.50 and 2.51 log CFU/cm2 after 1 and 14 d compared to the control. Again at 10°C under MA, the phages significantly reduced Lm-NalR by 1.71 and 3.24 log CFU/cm2 compared to control after 1 and 14 d, respectively. The results support the potential of lytic bacteriophages in effectively reducing populations of L. monocytogenes on freshcut leafy produce, under both AA and MA conditions.

  3. Cutting Cosmos

    Mikkelsen, Henrik Hvenegaard

    The foundation for this book is an ethnographic study of masculinity in a Bugkalot village in northern Philippines. While offering new research on the Bugkalot, widely known as the Ilongot, more than 30 years after the last important works were written on this famous hill-people, Cutting Cosmos...... into egalitarian relations. Cutting Cosmos shows how these seemingly opposed characteristics of male life - the egalitarianism and the assertive ideals - are interwoven. Acts of dominance are presented as acts of transgression that are persistently ritualized, contained and isolated as spectacular events within...

  4. Oxygenated phosphine fumigation for control of light brown apple moth, Epiphyas postvittana (Lepidoptera: Tortricidae), eggs on cut-flowers

    Light brown apple moth, Epiphyas postvittana, eggs were subjected to oxygenated phosphine fumigation treatments on cut flowers to determine efficacy and safety. Five cut flower species: roses, lilies, tulips, gerbera daisy, and pompon chrysanthemums, were fumigated in separate groups with 2500 ppm ...

  5. Multiscale controls on water surface roughness and implications for remote sensing of rivers

    Overstreet, B. T.; Legleiter, C. J.; Harrison, L.; Pitcher, L. H.; Ryan, J.; Rennermalm, A. K.; Smith, L. C.


    Remote sensing has emerged as a viable and efficient tool for studying river systems and facilitating their rehabilitation. While many remote sensing applications utilize spectral information from the substrate and water column, light reflected from the water surface is often a significant component of the total at-sensor radiance. As water surface roughness (WSR) increases, a greater proportion of surface facets become oriented so as to reflect, rather than transmit, light. As a result, WSR exerts a primary control on the amount of surface reflected light measured by a remote sensor. WSR in rivers is a function of flow hydraulics, channel form, slope, bed roughness, and wind. While the relative influence of each of these components on WSR changes with scale, understanding these relationships could lead to methods for obtaining hydraulic information from image-derived metrics of WSR (i.e., surface reflectance). We collected field data on flow depth and velocity using an acoustic Doppler current profiler and simultaneously measured WSR using a custom built ultrasonic distance sensor on a diverse set of rivers ranging from a 15 m wide supraglacial river on the Greenland Ice Sheet to 100 m wide gravel-bed rivers in Wyoming and Oregon. Simultaneous multi- and hyperspectral image data sets indicate that image-derived surface reflectance is strongly correlated with WSR. Temporally distributed point measurements of flow depth, velocity, and WSR on the supraglacial river capture a threefold range in discharge (6 m3/s to 17 m3/s) and indicate that flow velocity is a primary control on WSR in smaller channels, even in the absence of sediment-induced bed roughness. Spatially distributed field measurements from large gravel-bed rivers suggests that spatial variability of WSR in the thalweg corresponds with geomorphic facies while WSR along the channel margins is more significantly influenced by grain size, relative submergence, and bank geometry. These findings suggest that

  6. Remotely controlling of mobile robots using gesture captured by the Kinect and recognized by machine learning method

    Hsu, Roy CHaoming; Jian, Jhih-Wei; Lin, Chih-Chuan; Lai, Chien-Hung; Liu, Cheng-Ting


    The main purpose of this paper is to use machine learning method and Kinect and its body sensation technology to design a simple, convenient, yet effective robot remote control system. In this study, a Kinect sensor is used to capture the human body skeleton with depth information, and a gesture training and identification method is designed using the back propagation neural network to remotely command a mobile robot for certain actions via the Bluetooth. The experimental results show that the designed mobile robots remote control system can achieve, on an average, more than 96% of accurate identification of 7 types of gestures and can effectively control a real e-puck robot for the designed commands.

  7. UV laser with an acousto-optic intra-cavity control for GaN-sapphire cut

    Gradoboev, Yury G.; Kazaryan, Mishik A.; Mokrushin, Yury M.; Shakin, Oleg V.


    A copper vapor laser is proposed as the basic component of the installation for processing of sapphire substrates with a GaN-coating. Laser radiation is transformed to UV range by optical frequency doubling. Powerful UV lasers are prospective tools for crystal cutting, photolithography and recording of the fiber Bragg gratings. The proposed approach is more promising in comparison with the use of excimer radiation because of instabilities of excimer laser generation and low coherence of its radiation, which makes difficult precise focusing and using interference pattern of UV radiation for exposing materials. UV laser based on second harmonic radiation of copper vapors laser has been designed. The UV laser system of high operation stability has been developed with output power 1 W at wavelengths 255.5 nm, 271.1 nm, 289.1 nm and coherence length radiation about 4 cm. The original intra-cavity acousto-optic control of output radiation is developed. It is allows adjusting frequency and on-off time ratio of output laser pulses with high accuracy. The stable heat regime was achieved for an active element of copper vapor laser̤ The laser system allows to select an optimum mode of ultra-violet radiation exposition for production of different optical elements. Intra-cavity acousto-optic cell was used for controlling of single pulse amplitude and number of pulses without any power supply tuning providing the stable operation of the laser system.

  8. Functional role of phenylacetic acid from metapleural gland secretions in controlling fungal pathogens in evolutionarily derived leaf-cutting ants.

    Fernández-Marín, Hermógenes; Nash, David R; Higginbotham, Sarah; Estrada, Catalina; van Zweden, Jelle S; d'Ettorre, Patrizia; Wcislo, William T; Boomsma, Jacobus J


    Fungus-farming ant colonies vary four to five orders of magnitude in size. They employ compounds from actinomycete bacteria and exocrine glands as antimicrobial agents. Atta colonies have millions of ants and are particularly relevant for understanding hygienic strategies as they have abandoned their ancestors' prime dependence on antibiotic-based biological control in favour of using metapleural gland (MG) chemical secretions. Atta MGs are unique in synthesizing large quantities of phenylacetic acid (PAA), a known but little investigated antimicrobial agent. We show that particularly the smallest workers greatly reduce germination rates of Escovopsis and Metarhizium spores after actively applying PAA to experimental infection targets in garden fragments and transferring the spores to the ants' infrabuccal cavities. In vitro assays further indicated that Escovopsis strains isolated from evolutionarily derived leaf-cutting ants are less sensitive to PAA than strains from phylogenetically more basal fungus-farming ants, consistent with the dynamics of an evolutionary arms race between virulence and control for Escovopsis, but not Metarhizium. Atta ants form larger colonies with more extreme caste differentiation relative to other attines, in societies characterized by an almost complete absence of reproductive conflicts. We hypothesize that these changes are associated with unique evolutionary innovations in chemical pest management that appear robust against selection pressure for resistance by specialized mycopathogens. © 2015 The Author(s) Published by the Royal Society. All rights reserved.

  9. Functional role of phenylacetic acid from metapleural gland secretions in controlling fungal pathogens in evolutionarily derived leaf-cutting ants

    Fernández-Marín, Hermógenes; Nash, David R.; Higginbotham, Sarah; Estrada, Catalina; van Zweden, Jelle S.; d'Ettorre, Patrizia; Wcislo, William T.; Boomsma, Jacobus J.


    Fungus-farming ant colonies vary four to five orders of magnitude in size. They employ compounds from actinomycete bacteria and exocrine glands as antimicrobial agents. Atta colonies have millions of ants and are particularly relevant for understanding hygienic strategies as they have abandoned their ancestors' prime dependence on antibiotic-based biological control in favour of using metapleural gland (MG) chemical secretions. Atta MGs are unique in synthesizing large quantities of phenylacetic acid (PAA), a known but little investigated antimicrobial agent. We show that particularly the smallest workers greatly reduce germination rates of Escovopsis and Metarhizium spores after actively applying PAA to experimental infection targets in garden fragments and transferring the spores to the ants' infrabuccal cavities. In vitro assays further indicated that Escovopsis strains isolated from evolutionarily derived leaf-cutting ants are less sensitive to PAA than strains from phylogenetically more basal fungus-farming ants, consistent with the dynamics of an evolutionary arms race between virulence and control for Escovopsis, but not Metarhizium. Atta ants form larger colonies with more extreme caste differentiation relative to other attines, in societies characterized by an almost complete absence of reproductive conflicts. We hypothesize that these changes are associated with unique evolutionary innovations in chemical pest management that appear robust against selection pressure for resistance by specialized mycopathogens. PMID:25925100

  10. Remote control systems for space heating. Product overview 2010 and recommendations - Final report; Fernsteuerungen fuer Raumheizungen. Produktuebersicht 2010 und Empfehlungen - Schlussbericht

    Geilinger, E.; Bush, E. [Bush Energie GmbH, Felsberg (Switzerland); Venzin, T. [Hochschule fuer Technik und Wirtschaft (HTW) Chur, Chur (Switzerland); Nipkow, J. [Arena, Zuerich (Switzerland)


    Saving space heating energy by remote control: A remote-controlled space heating system allows a person to lower the room temperature in homes that go unoccupied for periods of time to the lowest temperature that's safe to keep the pipes from freezing while they're away. Comfort is guaranteed because the desired room temperature or mode can be activated in time before the guests arrive, via text message, phone or the internet. As most people simply leave unoccupied homes heated, the remote-controlled system saves up to 70% of heating energy when used actively. Market overview and product features: This report presents remote control devices that are currently available on the market. Their advantages and disadvantages are discussed as well as their technical features and function. Most of them are universal remote controls that have various uses, including temperature control. The report also discusses requirements that not all the examined products meet. Some lack an emergency power supply, the possibility for manual control or the ability to check the current temperature of the home from a remote location. Better planning for remote control: The critical issue proved not to be the remote control device itself, but the heating systems. Unfortunately, they often don't provide an option to be extended by remote control. We therefore call on the manufacturers to equip all new heating systems with options for remote control. It would also be helpful and desirable to provide information on the internet or in the technical documentation on how to connect a remote control device and which products are suitable - both for existing and new heating systems. If the system cannot be retrofitted, it should be described whether and how a central remote control with room thermostat can be installed. Improving communication: In this study, remote control and heating suppliers were interviewed as well as planners, installers and users of remote-controlled heating

  11. A remote control training system for rat navigation in complicated environment

    FENG Zhou-yan; LIU Chun-qing; LIU Fu-xin; LUO Jian-hong; ZHUANG Yue-ting; ZHENG Xiao-xiang; CHEN Wei-dong; YE Xue-song; ZHANG Shao-min; ZHENG Xiao-jing; WANG Peng; JIANG Jun; JIN Lin; XU Zhi-jian


    A remote control system has been developed to deliver stimuli into the rat brain through a wireless micro-stimulator for animal behavior training. The system consists of the following main components: an integrated PC control program, a transmitter and a receiver based on Bluetooth (BT) modules, a stimulator controlled by C8051 microprocessor, as well as an operant chamber and an eight-arm radial maze. The micro-stimulator is featured with its changeable amplitude of pulse output for both constant-voltage and constant-current mode, which provides an easy way to set the proper suitable stimulation intensity for different training. The system has been used in behavior experiments for monitoring and recording bar-pressing in the operant chamber, controlling rat roaming in the eight-arm maze, as well as navigating rats through a 3D obstacle route. The results indicated that the system worked stably and that the stimulation was effective for different types of rat behavior controls. In addition, the results showed that stimulation in the whisker barrel region of rat primary somatosensory cortex (SI) acted like a cue. The animals can be trained to take different desired turns upon the association between the SI cue stimulation and the reward stimulation in the medial forebrain bundle (MFB).

  12. Remote control of mobile robots through human eye gaze: the design and evaluation of an interface

    Latif, Hemin Omer; Sherkat, Nasser; Lotfi, Ahmad


    Controlling mobile robots remotely requires the operator to monitor the status of the robot through some sort of feedback. Assuming a vision based feedback system is used the operator is required to closely monitor the images while navigating the robot in real time. This will engage the eyes and the hands of the operator. Since the eyes are engaged in the monitoring task anyway, their gaze can be used to navigate the robot in order to free the hands of the operator. However, the challenge here lies in developing an interaction interface that enables an intuitive distinction to be made between monitoring and commanding. This paper presents a novel means of constructing a user interface to meet this challenge. A range of solutions are constructed by augmenting the visual feedback with command regions to investigate the extent to which a user can intuitively control the robot. An experimental platform comprising a mobile robot together with cameras and eye-gaze system is constructed. The design of the system allows control of the robot, control of onboard cameras and control of the interface through eye-gaze. A number of tasks are designed to evaluate the proposed solutions. This paper presents the design considerations and the results of the evaluation. Overall it is found that the proposed solutions provide effective means of successfully navigating the robot for a range of tasks.

  13. Hyperspectral remote sensing analysis of short rotation woody crops grown with controlled nutrient and irrigation treatments

    Im, Jungho; Jensen, John R.; Coleman, Mark; Nelson, Eric


    Abstract - Hyperspectral remote sensing research was conducted to document the biophysical and biochemical characteristics of controlled forest plots subjected to various nutrient and irrigation treatments. The experimental plots were located on the Savannah River Site near Aiken, SC. AISA hyperspectral imagery were analysed using three approaches, including: (1) normalized difference vegetation index based simple linear regression (NSLR), (2) partial least squares regression (PLSR) and (3) machine-learning regression trees (MLRT) to predict the biophysical and biochemical characteristics of the crops (leaf area index, stem biomass and five leaf nutrients concentrations). The calibration and cross-validation results were compared between the three techniques. The PLSR approach generally resulted in good predictive performance. The MLRT approach appeared to be a useful method to predict characteristics in a complex environment (i.e. many tree species and numerous fertilization and/or irrigation treatments) due to its powerful adaptability.

  14. The dismantling of the Tokai 1 Steam Raising Units using remotely controlled techniques

    Blight, J. [Business Development Manager Nuclear Business Unit Cybernetix SA, 13 - Marseille (France); Satoh, T. [General Manager Decommissioning Project Dept Japan Power Corporation, 13 - Marseille (France); Sawamoto, M. [General Manager Project Development Dept e-Energy Corp, SOJIZT Group, 13 - Marseille (France)


    The Tokai 1 gas cooled reactor 166 MW(e) reactor went into service in 1966 and was shut down in 1998. Since that date the Japan Atomic Power Company, the owner of the plant has been planning and implementing an ambitious programme which will lead to the first Level 3 decommissioning of a commercial power reactor in Japan. JPC's basic strategy is to manage and perform the decommissioning work with in-house resources, calling on the support of specialist companies as and when required. This paper describes the JPC programme and in particular the dismantling of the 4 steam raising units (SRU) which is to be performed using remotely controlled equipment. (authors)

  15. ARACHNE: A neural-neuroglial network builder with remotely controlled parallel computing.

    Aleksin, Sergey G; Zheng, Kaiyu; Rusakov, Dmitri A; Savtchenko, Leonid P


    Creating and running realistic models of neural networks has hitherto been a task for computing professionals rather than experimental neuroscientists. This is mainly because such networks usually engage substantial computational resources, the handling of which requires specific programing skills. Here we put forward a newly developed simulation environment ARACHNE: it enables an investigator to build and explore cellular networks of arbitrary biophysical and architectural complexity using the logic of NEURON and a simple interface on a local computer or a mobile device. The interface can control, through the internet, an optimized computational kernel installed on a remote computer cluster. ARACHNE can combine neuronal (wired) and astroglial (extracellular volume-transmission driven) network types and adopt realistic cell models from the NEURON library. The program and documentation (current version) are available at GitHub repository under the MIT License (MIT).

  16. Distributed multisensor processing, decision making, and control under constrained resources for remote health and environmental monitoring

    Talukder, Ashit; Sheikh, Tanwir; Chandramouli, Lavanya


    Previous field-deployable distributed sensing systems for health/biomedical applications and environmental sensing have been designed for data collection and data transmission at pre-set intervals, rather than for on-board processing These previous sensing systems lack autonomous capabilities, and have limited lifespans. We propose the use of an integrated machine learning architecture, with automated planning-scheduling and resource management capabilities that can be used for a variety of autonomous sensing applications with very limited computing, power, and bandwidth resources. We lay out general solutions for efficient processing in a multi-tiered (three-tier) machine learning framework that is suited for remote, mobile sensing systems. Novel dimensionality reduction techniques that are designed for classification are used to compress each individual sensor data and pass only relevant information to the mobile multisensor fusion module (second-tier). Statistical classifiers that are capable of handling missing/partial sensory data due to sensor failure or power loss are used to detect critical events and pass the information to the third tier (central server) for manual analysis and/or analysis by advanced pattern recognition techniques. Genetic optimisation algorithms are used to control the system in the presence of dynamic events, and also ensure that system requirements (i.e. minimum life of the system) are met. This tight integration of control optimisation and machine learning algorithms results in a highly efficient sensor network with intelligent decision making capabilities. The applicability of our technology in remote health monitoring and environmental monitoring is shown. Other uses of our solution are also discussed.

  17. Wireless remote control clinical image workflow: utilizing a PDA for offsite distribution

    Liu, Brent J.; Documet, Luis; Documet, Jorge; Huang, H. K.; Muldoon, Jean


    Last year we presented in RSNA an application to perform wireless remote control of PACS image distribution utilizing a handheld device such as a Personal Digital Assistant (PDA). This paper describes the clinical experiences including workflow scenarios of implementing the PDA application to route exams from the clinical PACS archive server to various locations for offsite distribution of clinical PACS exams. By utilizing this remote control application, radiologists can manage image workflow distribution with a single wireless handheld device without impacting their clinical workflow on diagnostic PACS workstations. A PDA application was designed and developed to perform DICOM Query and C-Move requests by a physician from a clinical PACS Archive to a CD-burning device for automatic burning of PACS data for the distribution to offsite. In addition, it was also used for convenient routing of historical PACS exams to the local web server, local workstations, and teleradiology systems. The application was evaluated by radiologists as well as other clinical staff who need to distribute PACS exams to offsite referring physician"s offices and offsite radiologists. An application for image workflow management utilizing wireless technology was implemented in a clinical environment and evaluated. A PDA application was successfully utilized to perform DICOM Query and C-Move requests from the clinical PACS archive to various offsite exam distribution devices. Clinical staff can utilize the PDA to manage image workflow and PACS exam distribution conveniently for offsite consultations by referring physicians and radiologists. This solution allows the radiologist to expand their effectiveness in health care delivery both within the radiology department as well as offisite by improving their clinical workflow.

  18. Cost-effectiveness of early detection of atrial fibrillation via remote control of implanted devices.

    Lorenzoni, Giulia; Folino, Franco; Soriani, Nicola; Iliceto, Sabino; Gregori, Dario


    Atrial fibrillation (AF) is an independent risk factor for stroke, and its incidence is high in patients implanted with pacemakers (PMs) and implantable cardioverter defibrillators (ICDs). The aim of our study is to evaluate the potential benefit of remote control (RC) on the incidence of stroke related to AF in patients with new-onset AF implanted with PMs and ICDs and to evaluate the impact of RC on the consumption of medical resources. The study consisted of two cohorts of patients: group AMB (patients attending ambulatory care clinics from August to October 2013) and group RC (patients followed remotely). All detected cases of new-onset AF were confirmed by the electrogram stored in the device's memory or by standard electrocardiogram recording. Monte Carlo simulations were performed in order to evaluate the potential risk reduction of stroke related to AF. The costs were estimated from the perspectives of the hospital, the patients and the National Health Service. We enrolled 223 patients in group RC and 359 in group AMB. We detected 20 new-onset cases of AF, and the median time to AF detection was 2 days in the RC and 78 days in the ambulatory care clinic control. Management of patients was more efficient with RC, with an average savings in direct costs of €40.88 per year per patient. Through the use of Monte Carlo simulations, we showed that the early detection of new-onset AF may provide a relative risk reduction of 94.3% for stroke in PM-implanted patients older than 55 years. RC potentially provides a risk reduction for stroke because it allows an early detection of new-onset AF. Moreover, it is also a cost-saving means of follow-up. © 2014 John Wiley & Sons, Ltd.

  19. Modelling, Design and Robust Control of a Remotely Operated Underwater Vehicle

    Luis Govinda García-Valdovinos


    Full Text Available Underwater remotely operated vehicles (ROVs play an important role in a number of shallow and deep- water missions for marine science, oil and gas extraction, exploration and salvage. In these applications, the motions of the ROV are guided either by a human pilot on a surface support vessel through an umbilical cord providing power and telemetry, or by an automatic pilot. In the case of automatic control, ROV state feedback is provided by acoustic and inertial sensors and this state information, along with a controller strategy, is used to perform several tasks such as station-keeping and auto- immersion/heading, among others. In this paper, the modelling, design and control of the Kaxan ROV is presented: i The complete six degrees of freedom, non linear hydrodynamic model with its parameters, ii the Kaxan hardware/software architecture, iii numerical simulations in Matlab/Simulink platform of a model-free second order sliding mode control along with ocean currents as disturbances and thruster dynamics, iv a virtual environment to visualize the motion of the Kaxan ROV and v experimental results of a one degree of freedom underwater system.

  20. Modelling, Design and Robust Control of a Remotely Operated Underwater Vehicle

    Luis Govinda García-Valdovinos


    Full Text Available Underwater remotely operated vehicles (ROVs play an important role in a number of shallow and deep-water missions for marine science, oil and gas extraction, exploration and salvage. In these applications, the motions of the ROV are guided either by a human pilot on a surface support vessel through an umbilical cord providing power and telemetry, or by an automatic pilot. In the case of automatic control, ROV state feedback is provided by acoustic and inertial sensors and this state information, along with a controller strategy, is used to perform several tasks such as station-keeping and auto-immersion/heading, among others. In this paper, the modelling, design and control of the Kaxan ROV is presented: i The complete six degrees of freedom, non linear hydrodynamic model with its parameters, ii the Kaxan hardware/software architecture, iii numerical simulations in Matlab/Simulink platform of a model-free second order sliding mode control along with ocean currents as disturbances and thruster dynamics, iv a virtual environment to visualize the motion of the Kaxan ROV and v experimental results of a one degree of freedom underwater system.

  1. Development of flank wear model of cutting tool by using adaptive feedback linear control system on machining AISI D2 steel and AISI 4340 steel

    Orra, Kashfull; Choudhury, Sounak K.


    The purpose of this paper is to build an adaptive feedback linear control system to check the variation of cutting force signal to improve the tool life. The paper discusses the use of transfer function approach in improving the mathematical modelling and adaptively controlling the process dynamics of the turning operation. The experimental results shows to be in agreement with the simulation model and error obtained is less than 3%. The state space approach model used in this paper successfully check the adequacy of the control system through controllability and observability test matrix and can be transferred from one state to another by appropriate input control in a finite time. The proposed system can be implemented to other machining process under varying range of cutting conditions to improve the efficiency and observability of the system.

  2. Methodology for allocation of remotely controlled switches in distribution networks based on a fuzzy multi-criteria decision making algorithm

    Bernardon, D.P.; Sperandio, M.; Garcia, V.J.; Russi, J. [UNIPAMPA - Federal University of Pampa (Brazil); Canha, L.N.; Abaide, A.R. [UFSM - Federal University of Santa Maria (Brazil); Daza, E.F.B. [AES Sul (Brazil)


    Continuity in power supply for the consumers is a permanent concern from the utilities, pursued with the development of technological solutions in order to improve the performance of network restoration conditions. Using remotely controlled switches corresponds to one possible approach to reach such an improvement and giving some convenient remote resources such as the fault detect, isolation and transfer loads. This paper presents a methodology implemented in a computer programming language for allocation these devices in electric distribution systems based on multi-criteria fuzzy analysis. The main contributions are focus on considering the impact of installing remote-controlled switches in the reliability indexes and algorithm of fuzzy multi-criteria decision making for the switches allocation. The effectiveness of the proposed algorithm is demonstrated with case studies involving actual systems of the AES Sul utility located in the south of Brazil. (author)

  3. Effect of short-term air storage after removal from controlled-atmosphere storage on apple and fresh-cut apple quality.

    Toivonen, Peter M A; Wiersma, Paul A; Hampson, Cheryl; Lannard, Brenda


    One of the realities of apple distribution for long-term stored fruit is that a controlled-atmosphere (CA) storage room will be unsealed and fruit held in air storage and marketed over several weeks. This work was conducted to determine the effect of post-CA air storage of whole fruit on potential shelf life for fresh-cut apple slices. Fresh-cut slices of 'Spartan' and 'Delicious' apples held in post-CA air storage for 2 or 4 weeks showed the least changes in cut surface color as compared with those made from apples immediately on removal from CA. Shelf life was most improved by post-CA air storage in the 'Spartan' apples, which were more advanced in maturity as compared with the 'Delicious' apples. Internal ethylene concentration, firmness, and respiration changed significantly with post-CA air storage, suggesting a relationship between physiological status of the whole fruit and shelf life of slices made from that fruit. The results support the hypothesis that apples had suppressed physiological activity in CA storage and are susceptible to accelerated deterioration upon cutting. Holding fruit for 2 weeks in air storage allowed recovery of physiological activity, which resulted in greater resistance to deterioration in response to fresh-cut processing.

  4. Output feedback fractional-order nonsingular terminal sliding mode control of underwater remotely operated vehicles.

    Wang, Yaoyao; Chen, Jiawang; Gu, Linyi


    For the 4-DOF (degrees of freedom) trajectory tracking control problem of underwater remotely operated vehicles (ROVs) in the presence of model uncertainties and external disturbances, a novel output feedback fractional-order nonsingular terminal sliding mode control (FO-NTSMC) technique is introduced in light of the equivalent output injection sliding mode observer (SMO) and TSMC principle and fractional calculus technology. The equivalent output injection SMO is applied to reconstruct the full states in finite time. Meanwhile, the FO-NTSMC algorithm, based on a new proposed fractional-order switching manifold, is designed to stabilize the tracking error to equilibrium points in finite time. The corresponding stability analysis of the closed-loop system is presented using the fractional-order version of the Lyapunov stability theory. Comparative numerical simulation results are presented and analyzed to demonstrate the effectiveness of the proposed method. Finally, it is noteworthy that the proposed output feedback FO-NTSMC technique can be used to control a broad range of nonlinear second-order dynamical systems in finite time.

  5. Remote control of neuronal activity with a light-gated glutamate receptor.

    Szobota, Stephanie; Gorostiza, Pau; Del Bene, Filippo; Wyart, Claire; Fortin, Doris L; Kolstad, Kathleen D; Tulyathan, Orapim; Volgraf, Matthew; Numano, Rika; Aaron, Holly L; Scott, Ethan K; Kramer, Richard H; Flannery, John; Baier, Herwig; Trauner, Dirk; Isacoff, Ehud Y


    The ability to stimulate select neurons in isolated tissue and in living animals is important for investigating their role in circuits and behavior. We show that the engineered light-gated ionotropic glutamate receptor (LiGluR), when introduced into neurons, enables remote control of their activity. Trains of action potentials are optimally evoked and extinguished by 380 nm and 500 nm light, respectively, while intermediate wavelengths provide graded control over the amplitude of depolarization. Light pulses of 1-5 ms in duration at approximately 380 nm trigger precisely timed action potentials and EPSP-like responses or can evoke sustained depolarizations that persist for minutes in the dark until extinguished by a short pulse of approximately 500 nm light. When introduced into sensory neurons in zebrafish larvae, activation of LiGluR reversibly blocks the escape response to touch. Our studies show that LiGluR provides robust control over neuronal activity, enabling the dissection and manipulation of neural circuitry in vivo.

  6. Application of multi-parameter remote monitoring and forecasting system for cut slope during construction period%路堑边坡施工期多参数远程监测预警系统应用

    钟佳迅; 庹先国; 张兆义; 王洪辉; 张贵宇


    山区高速公路路堑边坡在开挖过程中极可能发生坡体滑动、坍塌,甚至小规模崩塌现象,开发一种路堑边坡施工期多参数远程监测预警系统,保障工程施工期间施工方和当地群众的人身、财产安全显得极为重要.运用多种传感器技术实时地获取施工期间边坡倾斜度、位移和降雨量的变化情况,结合通用分组无线业务(GPRS)和手机短信服务(SMS)技术通过无线方式与上位机进行通信,建立被监测对象各类信息变化的数据库和网络发布平台,同时利用客户端管理软件对危险信息进行预警.通过在毕威高速公路的安装运行,系统成功地在施工期进行了监测预警,避免了不必要的人员伤亡和财产损失.%It is likely to occur slope sliding,caving in,and even small-scale collapse when the mountain highway cut slope in the excavation process. So it is extremely important to develop the multi-parameter remote monitoring and forecasting system for cut slope during the construction period to protect personal and property safety. A variety of sensor technology is used to access the tilt, displacement and rainfall of the slope in construction period, combined with GPRS and SMS technology to communicate with the host computer, and establishs platform of the monitored database and the web publishing. At the same time release the warning dangerous information. The monitoring and forecasting system has been successfully applied to Ri-Wei highway during the construction period, and avoided unnecessary personal and property losses.

  7. Liquid nitrogen-cooled diamond-wire concrete cutting. Innovative technology summary report



    Liquid nitrogen-cooled diamond-wire concrete cutting can be used to cut through thick concrete walls, floors, and structures without using water to cool the cutting wire. The diamond wire is cooled with liquid nitrogen in a 0.9-m (3-ft) long by 7.6-cm (3-in.) diameter pipe housing. The nitrogen evaporates, so no contaminated liquid waste is generated. Other than the use of liquid nitrogen, the system is a conventional diamond-wire saw assembly with remote hydraulic controls. Setup of the hydraulic-powered drive wheel and the diamond wire for cutting requires a relatively short period of time using people with minimal training. Concrete dust generated during the cutting is considerable and requires control. The production rate of this improved technology is 0.78 m{sup 2}/hr (8.4 ft{sup 2}/hr). The production rates of traditional (baseline) water-cooled diamond-wire cutting and circular saw cutting technologies are 1.11 m{sup 2}/hr (12 ft{sup 2}/hr), and 0.45 m{sup 2}/hr (4.8 ft{sup 2}/hr), respectively. The liquid nitrogen-cooled system costs 189% more than conventional diamond-wire cutting if contaminated liquid wastes collection, treatment, and disposal are not accounted for with the baseline. The new technology was 310% more costly than a conventional diamond circular saw, under the conditions of this demonstration (no wastewater control). For cutting a 0.9-m x 3.7-m (3-ft x 12-ft) wall, the improved technology costs $17,000, while baseline diamond-wire cutting would cost $9,000 and baseline circular-saw cutting would cost $5,500. The improved system may cost less than the baseline technologies or may be comparable in cost if wastewater control is included.

  8. A Three-Dimensional Object Orientation Detector Assisting People with Developmental Disabilities to Control Their Environmental Stimulation through Simple Occupational Activities with a Nintendo Wii Remote Controller

    Shih, Ching-Hsiang; Chang, Man-Ling; Mohua, Zhang


    This study evaluated whether two people with developmental disabilities would be able to actively perform simple occupational activities to control their preferred environmental stimulation using a Nintendo Wii Remote Controller with a newly developed three-dimensional object orientation detection program (TDOODP, i.e. a new software program,…

  9. Hardware description ADSP-21020 40-bit floating point DSP as designed in a remotely controlled digital CW Doppler radar

    Morrison, R.E.; Robinson, S.H.


    A continuous wave Doppler radar system has been designed which is portable, easily deployed, and remotely controlled. The heart of this system is a DSP/control board using Analog Devices ADSP-21020 40-bit floating point digital signal processor (DSP) microprocessor. Two 18-bit audio A/D converters provide digital input to the DSP/controller board for near real time target detection. Program memory for the DSP is dual ported with an Intel 87C51 microcontroller allowing DSP code to be up-loaded or down-loaded from a central controlling computer. The 87C51 provides overall system control for the remote radar and includes a time-of-day/day-of-year real time clock, system identification (ID) switches, and input/output (I/O) expansion by an Intel 82C55 I/O expander. 5 refs., 8 figs., 2 tabs.

  10. Pressure management of water distribution systems via the remote real-time control of variable speed pumps

    Page, Philip R


    Full Text Available Low and constant pressure can be maintained throughout a water distribution system by setting the pressure at remote consumer locations and using the pressure to control the speed of a variable speed pump (VSP). The prospect of incorporating...

  11. Effect of the sampling design of ground control points on the geometric correction of remotely sensed imagery

    Wang, J.; Ge, Y.; Heuvelink, G.B.M.; Zhou, C.; Brus, D.J.


    The acquirement of ground control points (GCPs) is a basic and important step in the geometric correction of remotely sensed imagery. In particular, the spatial distribution of GCPs may affect the accuracy and quality of image correction. In this paper, both a simulation experiment and actual-image

  12. 遥控玩具小汽车的设计%The design of the remote control toy car

    王莹; 杨双义; 曹禄明; 许洋洋


    In this paper,A "remote control toy car" is developed based on SCM.It has a forward,backward, turn left,according to distance,infrared remote control and detection,etc.This remote control toy car system according to the feature points mainly includes infrared remote sensing circuit,motor drive circuit,obstacle detection circuit,acoustic control circuit module, etc.%本文主要研究设计基于单片机的遥控玩具小汽车。它具有前进、后退、左右转向、显示距离、红外遥控和检测等功能。此遥控玩具小汽车系统按功能分主要包括红外遥感电路、电机驱动电路、障碍物检测电路、声控电路等模块。

  13. Controlled Remote State Preparation of an Arbitrary Two-Qubit State via a Six-Qubit Cluster State

    Sang, Ming-huang; Nie, Li-ping


    In this work, we have demonstrated that a six-qubit cluster state can be used to realize the deterministic controlled remote state preparation of an arbitrary two-qubit state by performing only the special two-qubit projective measurements.

  14. 一种新型智能空调遥控器%New Intelligent Air-Conditioning Remote Controller

    孙克辉; 叶正伟; 贺少波; 张志强


    In order to solve the problem that air conditioning remote controllers are not compatible, in this paper, an intelligent air conditioning remote controller is designed based on Atmega 16. In the remote controller, the method of measuring pulse width is employed to learn infrared signals, and the RLE compression algorithm is applied for data storage. Infrared carrier is generated through PWM mode based on the internal timer of SCM. The remote controller successfully achieves the learning and reproduction functions, which could be controlled via PC. The running test results show that the system is flexible and stable. It provides a new scheme for designing an intelligent remote controller.%为了解决空调遥控器不兼容问题,设计了一款基于Atmega16单片机的智能空调遥控器.该遥控器采用测量脉冲宽度的方法学习红外信号,同时使用游程编码算法对数据进行压缩后存储,并利用单片机内部定时器PWM模式产生红外载波,成功实现了对红外遥控的学习与再现,并可通过上位机进行控制.经运行测试表明,该智能遥控器操作灵活,性能稳定,为智能遥控器设计提供了一种新方案.

  15. Progress and challenges to control malaria in a remote area of Chittagong hill tracts, Bangladesh

    Haque Rashidul


    Full Text Available Abstract Background Malaria is endemic in 13 eastern districts where the overall infection prevalence is 3.97%. In 2006, Bangladesh received US$ 36.9 million from the Global Fund to Fight AIDS, Tuberculosis and Malaria (GFATM to support the national malaria control programme of Bangladesh. Objectives The objective of this study was to i clarify factors associated with treatment seeking behaviours of malaria ii distribution of LLIN, and iii re-treatment of ITN in remote area of a CHT district of Bangladesh two years after implementation of national control programme. Methods All households of Rajasthali sub-district of Rangamati district (households about 5,322, population about 24,097, all BRAC health workers (n = 15, health facilities and drug vendors' locations were mapped. Distances from households to health facilities, BRAC health workers and drug vendors were calculated. Logistic regression analysis was performed to assess the associations between the choice of the treatment and the distance to various treatment sources, education, occupation and ethnicity. SaTScan was used to detect clustering of treatment-seeking approaches. Findings LLIN distribution and the re-treatment of ITN exceeded target goals. The most common treatment facility for malaria-associated fever was malaria control programme led by BRAC and government (66.6% followed by the drug vendor (48.8%. Conclusion Closeness to health facilities run by the malaria control programme and drug vendors were significantly associated with the choice of treatment. A high proportion of people preferred drug vendors without having a proper diagnosis. Drug vendors are highly patronized and thus there is a need to improve their services for public health good. Otherwise it may cause incomplete treatment, misuse of anti-malarial drugs that will contribute to the risk of drug resistance and jeopardize the present malaria control efforts in Bangladesh.

  16. Watching elderly and disabled person's physical condition by remotely controlled monorail robot

    Nagasaka, Yasunori; Matsumoto, Yoshinori; Fukaya, Yasutoshi; Takahashi, Tomoichi; Takeshita, Toru


    We are developing a nursing system using robots and cameras. The cameras are mounted on a remote controlled monorail robot which moves inside a room and watches the elderly. It is necessary to pay attention to the elderly at home or nursing homes all time. This requires staffs to pay attention to them at every time. The purpose of our system is to help those staffs. This study intends to improve such situation. A host computer controls a monorail robot to go in front of the elderly using the images taken by cameras on the ceiling. A CCD camera is mounted on the monorail robot to take pictures of their facial expression or movements. The robot sends the images to a host computer that checks them whether something unusual happens or not. We propose a simple calibration method for positioning the monorail robots to track the moves of the elderly for keeping their faces at center of camera view. We built a small experiment system, and evaluated our camera calibration method and image processing algorithm.

  17. Cosmetics-triggered percutaneous remote control of transgene expression in mice

    Wang, Hui; Ye, Haifeng; Xie, Mingqi; Daoud El-Baba, Marie; Fussenegger, Martin


    Synthetic biology has significantly advanced the rational design of trigger-inducible gene switches that program cellular behavior in a reliable and predictable manner. Capitalizing on genetic componentry, including the repressor PmeR and its cognate operator OPmeR, that has evolved in Pseudomonas syringae pathovar tomato DC3000 to sense and resist plant-defence metabolites of the paraben class, we have designed a set of inducible and repressible mammalian transcription-control devices that could dose-dependently fine-tune transgene expression in mammalian cells and mice in response to paraben derivatives. With an over 60-years track record as licensed preservatives in the cosmetics industry, paraben derivatives have become a commonplace ingredient of most skin-care products including shower gels, cleansing toners and hand creams. As parabens can rapidly reach the bloodstream of mice following topical application, we used this feature to percutaneously program transgene expression of subcutaneous designer cell implants using off-the-shelf commercial paraben-containing skin-care cosmetics. The combination of non-invasive, transdermal and orthogonal trigger-inducible remote control of transgene expression may provide novel opportunities for dynamic interventions in future gene and cell-based therapies. PMID:25943548

  18. Research of Remote Control for Robot%远程控制机器人的研究



    随着自动化时代的到来,机器人在各领域的应用越来越广泛,并且逐渐在各个方面替代和超越人工能力。但越来越复杂多变的工作环境和功能需求,也对机器人及其控制体系提出了更高的要求。本文通过分析机器人的硬件系统结构、网络通讯系统、终端操作系统等,从而对远程控制机器人进行研究。%With the arrival of the era of automation,the robot has been widely applied in various fields and has gradually replaced,even beyond ,hu-mans’ability.However,it is proposed higher requirements of robot and its control system to satisfy the more complex work environment and function. In this article,I analyzes the hardware system,network communications system,terminal operating system to research of remote control robot.

  19. Cosmetics-triggered percutaneous remote control of transgene expression in mice.

    Wang, Hui; Ye, Haifeng; Xie, Mingqi; Daoud El-Baba, Marie; Fussenegger, Martin


    Synthetic biology has significantly advanced the rational design of trigger-inducible gene switches that program cellular behavior in a reliable and predictable manner. Capitalizing on genetic componentry, including the repressor PmeR and its cognate operator OPmeR, that has evolved in Pseudomonas syringae pathovar tomato DC3000 to sense and resist plant-defence metabolites of the paraben class, we have designed a set of inducible and repressible mammalian transcription-control devices that could dose-dependently fine-tune transgene expression in mammalian cells and mice in response to paraben derivatives. With an over 60-years track record as licensed preservatives in the cosmetics industry, paraben derivatives have become a commonplace ingredient of most skin-care products including shower gels, cleansing toners and hand creams. As parabens can rapidly reach the bloodstream of mice following topical application, we used this feature to percutaneously program transgene expression of subcutaneous designer cell implants using off-the-shelf commercial paraben-containing skin-care cosmetics. The combination of non-invasive, transdermal and orthogonal trigger-inducible remote control of transgene expression may provide novel opportunities for dynamic interventions in future gene and cell-based therapies.

  20. Remote-controlling chemical reactions by light: towards chemistry with high spatio-temporal resolution.

    Göstl, Robert; Senf, Antti; Hecht, Stefan


    The foundation of the chemical enterprise has always been the creation of new molecular entities, such as pharmaceuticals or polymeric materials. Over the past decades, this continuing effort of designing compounds with improved properties has been complemented by a strong effort to render their preparation (more) sustainable by implementing atom as well as energy economic strategies. Therefore, synthetic chemistry is typically concerned with making specific bonds and connections in a highly selective and efficient manner. However, to increase the degree of sophistication and expand the scope of our work, we argue that the modern aspiring chemist should in addition be concerned with attaining (better) control over when and where chemical bonds are being made or broken. For this purpose, photoswitchable molecular systems, which allow for external modulation of chemical reactions by light, are being developed and in this review we are covering the current state of the art of this exciting new field. These "remote-controlled synthetic tools" provide a remarkable opportunity to perform chemical transformations with high spatial and temporal resolution and should therefore allow regulating biological processes as well as material and device performance.

  1. Snaring to control feral pigs sus scrofa in a remote Hawaiian rain forest

    Anderson, Stephen J.; Stone, Charles P.


    Feral pig Sus scrofa control in Kipahulu Valley, a remote rain forest in Haleakala National Park, Maui, Hawaiian Islands, has been achieved with snares over a 45-month period. Initial pig densities in fenced management units of 6·2 km2 and 7·8 km2were estimated at 6 animals/km2 and 14·3 animals/km2 for the two units, based on population reconstruction from animals killed and aged. During the 45 months of the study, 1978 snares were set, and 1·6 million snare nights were logged. Snare density reached 96/km2 and 200/km2 for the two management units by the end of the study. A mean effort of 43 worker hours/pig was used to remove 53 pigs from the upper management unit, and a mean of 7 worker hours/pig to remove 175 animals from the more densely populated lower unit. Pig activity monitoring along transects provided a good measure of control effectiveness until densities of about 1 pig/km2 were achieved, after which transects became less useful than scouting for determining pig activity.

  2. Active control over carbon deposition on diagnostic components and in remote areas of ITER

    Litnovsky, A.; Philipps, V.; Wienhold, P.; Matveeva, M.; Pospieszczyk, A.; Sergienko, G.; Schmitz, O.; Samm, U.; Stoschus, H.; Schulz, C.; Marot, L.; Romanyuk, A.; De Temmerman, G.; Laengner, M.; Breuer, U.; Stark, A.


    In future fusion devices like ITER deposition of impurities will likely occur in areas, remote from plasma and on the sensitive components of optical diagnostics, like mirrors and windows. Deposition in remote areas may lead to the tritium retention and therefore represent a safety issue. Deposition

  3. Controlled Breeding Techniques to Accelerate Rooting of Poplar Floral Cuttings by Warming the Flowerpots%杨树花枝盆栽加温促进生根人工杂交育种技术

    蔄胜军; 王志英; 苏晓华; 刘巍; 王胜东; 杨志岩


    Species such as Populus deltoides Bartr. which are difficult to root and have a long period of seed maturation are not amenable to controlled crossing using floral cuttings in water culture. A controlled breeding technique were studies involving accelerating rooting of floral cuttings by warming the flowerpot using a constant water temperature and at the same time keeping flower buds in dormancy by low temperature environment. The floral cuttings were planted in flowerpots with soil and grown in a cool (3℃) room, the pots being soaked in water at 3 different temperatures. After 25 days, the pots with the floral cuttings were moved to the greenhouse for controlled crossing. The floral cuttings of P. deltoides with internal soil temperature of 22℃ were much superior to the others. Not only did it ease maintaining the vigor of floral cuttings, but also result in more and better seeds, which had 25. 5 root hairs, root length of 31. 8 cm and root weight of 16. 9 g on average. The ones with 18℃ treatment had 12 root hairs, 10. 4 cm root length and 2. 7 g root weight on average, and the ones with 14℃ treatment had 2. 2 root hairs, 4. 2 cm root length and 0. 4 g root weight on average. Efforts to improve rooting of P. deltoids by warming the flowerpot proved to be successful in controlled crossing with species of sections Aigeiros and Tacamahaca. All the floral cuttings in soils at 22℃ produced seeds (100% ) , with an average of 1 800 seeds per floral cutting. 60% floral cuttings at 18 X treatment survived, but the flowers fell because the cuttings had so weak root hairs that they were not enough to support blooming, with an average of 1 000 seeds per fruited cutting. Of those at 14℃ treatment, 20% of cuttings produced seeds, with an average of 500 seeds per fruited cutting, and 80% of the floral cuttings were infected by canker. Other female parents such as P. x canadensis showed similar results to P. deltoides, but floral cuttings of section Tacamahaca have

  4. Effect of remote ischemic preconditioning on renal dysfunction after complex valvular heart surgery: a randomized controlled trial.

    Choi, Yong Seon; Shim, Jae Kwang; Kim, Jong Chan; Kang, Kyu-Sik; Seo, Yong Han; Ahn, Ki-Ryang; Kwak, Young Lan


    Acute kidney injury after cardiac surgery with cardiopulmonary bypass is closely related to systemic inflammatory reactions and oxidative stresses. Remote ischemic preconditioning is a systemic protective strategy whereby brief limb ischemia confers systemic protection against prolonged ischemia and inflammatory reactions in distant organs. This study investigated whether remote ischemic preconditioning provides systemic protective effect on kidneys that are not directly exposed to ischemia-reperfusion injury during complex valvular heart surgery. Seventy-six adult patients undergoing complex valvular heart surgery were randomly assigned to either remote ischemic preconditioning group (n = 38) or control group (n = 38). Remote ischemic preconditioning consisted of 3 10-minute cycles of lower limb ischemia and reperfusion with an automated cuff inflator. Primary end points were comparisons of biomarkers of renal injury including serum creatinine, cystatin C and neutrophil gelatinase-associated lipocalin, and incidence of acute kidney injury. Secondary end points were comparisons of myocardial enzyme release and pulmonary parameters. There were no significant differences in serum levels of biomarkers of renal injury between groups throughout the study period. The incidence of acute kidney injury did not differ between groups. Creatine kinase isoenzyme MB at 24 hours after surgery was lower, and intensive care unit stay was shorter in the remote ischemic preconditioning group than in the control group. In patients undergoing complex valvular heart surgery, remote ischemic preconditioning did not reduce degree of renal injury or incidence of acute kidney injury whereas it did reduce myocardial injury and intensive care unit stay. Copyright © 2011 The American Association for Thoracic Surgery. Published by Mosby, Inc. All rights reserved.

  5. Home BP monitoring using a telemonitoring system is effective for controlling BP in a remote island in Japan.

    Kaihara, Toshiki; Eguchi, Kazuo; Kario, Kazuomi


    The purpose of this study was to assess whether a home blood pressure (HBP) telemonitoring system could improve BP control and overcome the problems of HBP monitoring in a remote location. The authors enrolled 60 subjects and randomized them to either a Telemonitoring group or a Control group. The outcomes were changes in HBP level, adherence to HBP monitoring, and visual analog scale (VAS; score 0-100) as a measure of the motivation to perform HBP measurements. The reductions in morning systolic BP (-5.5 ± 0.9 mm Hg vs 0.7 ± 0.7 mm Hg, P Telemonitoring group than in the Control group. The measure of the adherence to HBP monitoring tended to be better (P = .064) in the Telemonitoring group than in the Control group. These results indicate that an HBP telemonitoring system would be a beneficial healthcare measure in remote geographical locations. ©2014 Wiley Periodicals, Inc.

  6. Pharmacokinetics of aminophylline delivered to the small intestine and colon using remote controlled capsules

    LIU Hong-ying; PI Xi-tian; ZHENG Xiao-lin; HOU Wen-sheng; CUI Jian-guo


    Background A patented remote controlled capsule (RCC) has recently been developed to provide noninvasive drug delivery to selected sites in the human gut that allows assessment of regional gastrointestinal (GI) drug absorption under a normal physiological environment. The objective of this study was to investigate the rate and extent of aminophylline absorption after site-specific delivery of the drug in the GI tract using RCC and a magnetic marker monitoring (MMM) technique.Methods This study was conducted in twelve healthy male subjects, in a three-treatment, randomized, crossover manner with a 7-day washout. Eligible subjects received a 150 mg aminophylline dose through an oral administration, or via a remote controlled capsule, delivered to the small bowel or ascending colon. MMM was employed to monitor the GI transit of the RCC, and the radio-frequency signal was used to activate capsules at target sites. Blood samples were obtained at regular intervals until 24 hours post dose/activation. Plasma theophylline concentrations were measured by a TDx System Analyzer. A comparison of the PK profile with the oral dosing route of aminophylline was performed after delivery to the small bowel and colon.Results The RCC was well tolerated in volunteers. The mean capsule activation time for the small bowel and ascending colon was 2.07 hours and 6.08 hours post dose. Aminophylline had similar absorption profiles from the small bowel compared with the stomach, with an area under the curve (AUC_t) ratio of 92% vs. The stomach, but a lower absorption profile from the ascending colon, with an AUC_t ratio of 47.2% vs. The stomach.Conclusions The proprietary of the RCC and MMM technique offer the opportunity to obtain data on the intestinal absorption of a drug in humans under noninvasive conditions. Aminophylline is rapidly and efficiently absorbed from the small bowel. While colonic absorption was limited by the poor water condition although effective absorption was observed

  7. Community health workers improve diabetes care in remote Australian Indigenous communities: results of a pragmatic cluster randomized controlled trial.

    McDermott, Robyn A; Schmidt, Barbara; Preece, Cilla; Owens, Vickie; Taylor, Sean; Li, Ming; Esterman, Adrian


    Health outcomes for Indigenous Australians with diabetes in remote areas remain poor, including high rates of avoidable complications which could be reduced with better primary level care. We aimed to evaluate the effectiveness of a community-based health-worker led case management approach to the care of Indigenous adults with poorly controlled type 2 diabetes in primary care services in remote northern Australia. Two hundred and thirteen adults with poorly controlled diabetes (HbA1c > 8.5%) and significant comorbidities in 12 remote communities were randomly assigned by service cluster to receive chronic care co-ordination from a community-based health worker supported by a clinical outreach team, or to a waitlist control group which received usual care. At baseline, mean age of participants was 47.9 years, 62.4% were female, half were Aboriginal and half identified as Torres Strait Islander, 67% had less than 12 years of education, 39% were smokers, median income was $18,200 and 47% were unemployed. Mean HbA1c was 10.7% (93 mmol/mol) and BMI 32.5. At follow-up after 18 months, HbA1c reduction was significantly greater in the intervention group (-1.0% vs -0.2%, SE (diff) = 0.2, p = 0.02). There were no significant differences between the groups for blood pressure, lipid profile, BMI or renal function. Intervention group participants were more likely to receive nutrition and dental services according to scheduled care plans. Smoking rates were unchanged. A culturally safe, community level health-worker led model of diabetes care for high risk patients can be effective in improving diabetes control in remote Indigenous Australian communities where there is poor access to mainstream services. This approach can be effective in other remote settings, but requires longer term evaluation to capture accrued benefits. ANZCTR 12610000812099, Registered 29 September 2010.

  8. A Preliminary Study on Ultrasonic Cutting Process for Carbon Fibre Prepreg


    In ultrasonic cutting process, the cutting pressure is still essential for achieving good quality cut edge compared with traditional mechanical cutting process. With the increase of the cutting power, the cutting pressure demand decreases. The cutting velocity range is extended broadly. The experiment results show that ultrasonic cutting technique is an effective, clean and controllable method for machining of carbon fibre prepreg.


    A. V. Masloboev


    Full Text Available The general line of research is concerned with development of information technologies and computer simulation tools for management information and analytical support of complex semistructured systems. Regional socio-economic systems are consideredas a representative of this system type. Investigation is carried out within the bounds of development strategy implementation of the Arctic zone of the Russian Federation and national safety until 2020 in the Murmansk region, specifically under engineering of high end information infrastructure for innovation and security control problem-solving of regional development. Research methodology consists of system dynamics modeling method, distributed information system engineering technologies, pattern-based modeling and design techniques. The work deals with development of toolkit for decision-making information support problem-solving in the field of innovation security management of regional economics. For that purpose a system-dynamic models suite of innovation process standard components and information technology for remote formation and control of innovation business simulation models under research have been developed. Designed toolkit provides innovation security index dynamics forecasting and innovation business effectiveness of regional economics. Information technology is implemented within the bounds of thin client architecture and is intended for simulation models design process automation of complex systems. Technology implementation software tools provide pattern-based system-dynamic models distributed formation and simulation control of innovation processes. The technology provides availability and reusability index enhancement of information support facilities in application to innovation process simulation at the expense of distributed access to innovation business simulation modeling tools and model synthesis by the reusable components, simulating standard elements of innovation

  10. Subaqueous terminus evolution at Tasman Glacier, New Zealand, as determined by remote-controlled survey

    Purdie, Heather; Bealing, Paul; Tidey, Emily; Harrison, Justin


    The presence of subaqueous ice ramps at the terminus of calving glaciers result from a combination of subaerial and subaqueous processes. These ice ramps eventually buoyantly calve, an event that can be hazardous to companies operating boat tours on proglacial lakes. However our knowledge of ice ramp forming processes, and feedbacks associated with their evolution, is sparse. We are using a remote controlled jet boat to survey bathymetry at an active calving margin. This vessel, mounted with both depth and side-scan sonar, can map subaqueous portions of the terminus right up to the active calving face at no risk to the operators. Surveys at the Tasman Glacier terminus over three consecutive years have revealed that subaqueous ice ramps are ephemeral features. In 2015 multiple ice ramps extended out into the lake from the terminus by 100-200 m, with the ramp surface being as much as 60 m below the water line at its outer perimeter. The maximum depth of the Tasman Lake at this time was 240 m. Within one month of the survey taking place, the largest of these ice ramps had calved and disintegrated. The consistent location of ice ramps between surveys indicates that other factors, like subglacial hydrology, may influence ice ramp evolution.

  11. Remote control system for high-perfomance computer simulation of crystal growth by the PFC method

    Pavlyuk, Evgeny; Starodumov, Ilya; Osipov, Sergei


    Modeling of crystallization process by the phase field crystal method (PFC) - one of the important directions of modern computational materials science. In this paper, the practical side of the computer simulation of the crystallization process by the PFC method is investigated. To solve problems using this method, it is necessary to use high-performance computing clusters, data storage systems and other often expensive complex computer systems. Access to such resources is often limited, unstable and accompanied by various administrative problems. In addition, the variety of software and settings of different computing clusters sometimes does not allow researchers to use unified program code. There is a need to adapt the program code for each configuration of the computer complex. The practical experience of the authors has shown that the creation of a special control system for computing with the possibility of remote use can greatly simplify the implementation of simulations and increase the performance of scientific research. In current paper we show the principal idea of such a system and justify its efficiency.

  12. FARE device operational characteristics of remote controlled fuelling machine at Wolsong NPP

    Namgung, I. [Korea Power Engineering Co., Taejon (Korea, Republic of); Kim, Y. B.; Lee, S. K. [Korea Electric Power Research Institute, Taejon (Korea, Republic of)


    There are 4 CANDU6 type reactors operating at Wolsong site. For fuelling operation of certain fuel channels (with flow less than 21.5 kg/s) a FARE (flow Assist Ram Extension) device is used. During the refuelling operation, two remote controlled F/Ms (Fuelling Machines) are attached to a designated fuel channel and carry out refuelling job. The upstream F/M inserts new fuel bundles into the fuel channel while the downstream F/M discharges spent fuel bundles. In order to assist fuelling operation of channels that has lower coolant flow rate, the FARE device is used instead of F/M C-ram to push the fuel bundle string. The FARE device is essentially a flow restricting element that produces enough drag force to push the fuel bundle string toward downstream F/M. Channels that require the use of FARE device for refuelling are located along the outside perimeter of reactor. This paper presents the FARE device design feature, steady state hydraulic and operational characteristics and behavior of the device when coupled with fuel bundle string during fuelling operation. The study showed that the steady state performance of Fare device meets the design objective that was confirmed by downstream F/M C-ram force to be positive.

  13. Magnetically remote-controlled optical sensor spheres for monitoring oxygen or pH.

    Mistlberger, Günter; Koren, Klaus; Borisov, Sergey M; Klimant, Ingo


    Magnetic sensor macrospheres (MagSeMacs), i.e., stainless steel spheres coated with optical chemical sensors, are presented as an alternative to existing optical sensor patches and fiber-optical dip-probes. Such spheres can either be reversibly attached to the tip of an optical fiber (dip-probe) or trapped inside a vessel for read-out through the side wall. Moving the magnetic separator at the exterior enables measurements at varying positions with a single sensor. Moreover, the sensor's replacement is rapid and contactless. We measured dissolved oxygen or pH in stirred liquids, rotating flasks, and 24-well plates with a SensorDish-reader device for parallel cell culture monitoring. In these applications, MagSeMacs proved to be advantageous over conventional sensor patches and magnetic optical sensor particles because of their magnetism, spherical shape, reflectance, and size. These properties resulted in strong but reversible fixation, magnetic remote-controllability, short response times, high signal intensities, and simplified handling.

  14. Laser system for remote sensing monitoring of air pollution and quality control of the atmosphere

    Belić Ilija


    Full Text Available Monitoring of the atmosphere and determination of the types and amounts of pollutants is becoming more important issue in complex and global monitoring of the environment. On the geocomponent and geocomplex level problem of monitoring the environment is attracting the attention of the scientific experts of different profiles (chemists, physicists, geographers, biologists, meteorologists, both in the national and international projects. Because of the general characteristics of the Earth's atmosphere (Dynamically Ballanced Instability DBI and the potential contribution to climate change solutions air-pollution monitoring has become particularly important field of environmental research. Control of aerosol distribution over Europe is enabled by EARLINET systems (European Aerosol Lidar NETwork. Serbia’s inclusion into these European courses needs development of the device, the standardization of methods and direct activity in determining the type, quantity and location of aerosol. This paper is analyzing the first step in the study of air-pollution, which is consisted of the realization of a functional model of LIDAR remote sensing devices for the large particle pollutants.

  15. Screening molecules for control of citrus huanglongbing using an optimized regeneration system for 'Candidatus Liberibacter asiaticus'-infected periwinkle (Catharanthus roseus) cuttings.

    Zhang, Muqing; Duan, Yongping; Zhou, Lijuan; Turechek, William W; Stover, Ed; Powell, Charles A


    Citrus huanglongbing is one of the most destructive diseases of citrus worldwide. The disease is associated with three different species of 'Candidatus Liberibacter', of which 'Ca. L. asiaticus' is the most widely distributed. An optimized system using 'Ca. L. asiaticus'-infected periwinkle cuttings was developed to screen chemical compounds effective for controlling the bacterial population while simultaneously assessing their phytotoxicity. The optimal regeneration conditions were determined to be the use of vermiculite as a growth medium for the cuttings, and a fertilization routine using half-strength Murashige and Tucker medium supplemented with both naphthalene acetic acid (4 microg/ml) and indole-3-butyric acid (4 microg/ml). This system allowed a plant regeneration rate of 60.6% for 'Ca. L. asiaticus'-infected cuttings in contrast to the <1% regeneration rate with water alone. Two chemical agents, penicillin G sodium and 2,2-dibromo-3-nitrilopropionamide (DBNPA), were found to be effective at eliminating or suppressing the 'Ca. L. asiaticus' bacterium in this periwinkle regeneration system. When treated with penicillin G sodium at 50 microg/ml, all plants regenerated from 'Ca. L. asiaticus'-infected cuttings were 'Ca. L. asiaticus' negative as determined by both nested polymerase chain reaction (PCR) and quantitative real-time PCR. In addition, DBNPA was also able to significantly reduce the percentage of 'Ca. L. asiaticus'-positive plants and the titer of the 'Ca. L. asiaticus' bacterium at 200 microl/liter.

  16. Dominus for cut flower production

    Fumigation with methyl bromide was the principal method of soilborne pest control in cut flower production. Many cut flower growers in Florida have ceased production, but those that remain are restricted in the fumigants that they are able to utilize due to proximity to potable water sources and oc...

  17. 用于网格状金属切割的等离子切割电源控制策略研究%Research on control strategy of plasma arc cutting power supply used for grid plates cutting

    陈桂涛; 刘春强; 孙强; 钟彦儒


    For solving the problem that how to control arc current accurately in the process of cutting grid plates, an arc current reference feedforward composite control strategy was proposed, which was based on the analysis of arc transfer process and arc model. The external loop of control strategy is current loop, which can control arc current and achieve the precise control of arc energy. Arc current reference feedforward compensation based on load model was introduced into voltage inner loop. The voltage loop can quickly establish the arc voltage, which maintains the arc stable. Simulations and experimental results were given to verify that the proposed control method can respond quickly between non⁃transferred arc and transferred arc when cutting grid plates,and can achieve the precise control of arc current simultaneously.%为解决金属网格切割过程中精确控制弧电流的问题,在分析金属网格切割弧转移过程、建立电弧模型的基础上,提出一种基于电弧负载模型的弧电流指令前馈的复合控制策略。控制策略外环为电流环,实现等离子电弧电流及能量控制;在电压内环引入基于电弧负载模型的弧电流指令前馈控制,通过前馈控制的快速性迅速建立弧柱电压,达到维持电弧稳定的目的。仿真和实验结果表明,提出的控制策略能够快速响应网格状金属切割时引弧过程及非转移弧和转移弧之间的快速切换需求,实现弧电流的快速精确控制。

  18. Design and Analysis of a Region-Wide Remotely Controllable Electrical Lock-Out System

    Olama, Mohammed M [ORNL; Allgood, Glenn O [ORNL; Kuruganti, Phani Teja [ORNL; Howlader, Mostofa [ORNL; Kisner, Roger A [ORNL; Ewing, Paul D [ORNL; McIntyre, Timothy J [ORNL


    Electric utilities have a main responsibility to protect the lives and safety of their workers when they are working on low-, medium-, and high-voltage power lines and distribution circuits. With the anticipated widespread deployment of smart grids, a secure and highly reliable means of maintaining isolation of customer-owned distributed generation (DG) from the affected distribution circuits during maintenance is necessary to provide a fully de-energized work area, ensure utility personnel safety, and prevent hazards that can lead to accidents such as accidental electrocution from unanticipated power sources. Some circuits are serviced while energized (live line work) while others are de-energized for maintenance. For servicing de-energized circuits and equipment, lock-out tag-out (LOTO) programs provide a verifiable procedure for ensuring that circuit breakers are locked in the off state and tagged to indicate that status to operational personnel so that the lines will be checked for voltage to verify they are de-energized. The de-energized area is isolated from any energized sources, which traditionally are the substations. This procedure works well when all power sources and their interconnections are known armed with this knowledge, utility personnel can determine the appropriate circuits to de-energize for isolating the target line or equipment. However, with customer-owned DG tied into the grid, the risk of inadvertently reenergizing a circuit increases because circuit connections may not be adequately documented and are not under the direct control of the local utility. Thus, the active device may not be properly de-energized or isolated from the work area. Further, a remote means of de-energizing and locking out energized devices provides an opportunity for greatly reduced safety risk to utility personnel compared to manual operations. In this paper, we present a remotely controllable LOTO system that allows individual workers to determine the

  19. Characterizations of the radioactive waste by the remotely-controlled collimated spectrometric system

    Stepanov, Vyacheslav E.; Potapov, Victor N.; Smirnov, Sergey V.; Ivanov, Oleg P. [National Research Centre Kurchatov Institute, Moscow, (Russian Federation)


    Decontamination and decommissioning of the research reactors MR (Testing Reactor) and RFT (Reactor of Physics and Technology) has recently been initiated in the National Research Center (NRC) 'Kurchatov institute', Moscow. In the building, neighboring to the reactor, the storage of HLRW is located. The storage is made of monolithic concrete in which steel cells depth 4 m are located. In cells of storage the HLRW packed into cases are placed. These the radioactive waste are also subject to export on long storage in the specialized organization. For characterization of the radioactive waste in cases the remote-controlled collimated spectrometer system was used. The system consists of a spectrometric collimated gamma-ray detector, a color video camera and a control unit, mounted on a rotator, which are mounted on a tripod with the host computer. For determination of specific activity of radionuclides in cases, it is developed programs of calculation of coefficients of proportionality of specific activity to the corresponding speeds of the account in peaks of full absorption at single specific activity of radionuclides in cases. For determination of these coefficients the mathematical model of spectrometer system based on the Monte-Carlo method was used. Dependences of calibration coefficients for various radionuclides from distance between the detector and a case at various values of the radioactive waste density in cases are given. Measurements of specific activity in cases are taken and are discussed. By results of measurements decisions on the appeal of the radioactive waste being in cases are made. (authors)

  20. Object Recognition System in Remote Controlled Weapon Station using SIFT and SURF Methods

    Midriem Mirdanies


    Full Text Available Object recognition system using computer vision that is implemented on Remote Controlled Weapon Station (RCWS is discussed. This system will make it easier to identify and shoot targeted object automatically. Algorithm was created to recognize real time multiple objects using two methods i.e. Scale Invariant Feature Transform (SIFT and Speeded Up Robust Features (SURF combined with K-Nearest Neighbors (KNN and Random Sample Consensus (RANSAC for verification. The algorithm is designed to improve object detection to be more robust and to minimize the processing time required. Objects are registered on the system consisting of the armored personnel carrier, tanks, bus, sedan, big foot, and police jeep. In addition, object selection can use mouse to shoot another object that has not been registered on the system. Kinect™ is used to capture RGB images and to find the coordinates x, y, and z of the object. The programming language used is C with visual studio IDE 2010 and opencv libraries. Object recognition program is divided into three parts: 1 reading image from kinect™ and simulation results, 2 object recognition process, and 3 transfer of the object data to the ballistic computer. Communication between programs is performed using shared memory. The detected object data is sent to the ballistic computer via Local Area Network (LAN using winsock for ballistic calculation, and then the motor control system moves the direction of the weapon model to the desired object. The experimental results show that the SIFT method is more suitable because more accurate and faster than SURF with the average processing time to detect one object is 430.2 ms, two object is 618.4 ms, three objects is 682.4 ms, and four objects is 756.2 ms. Object recognition program is able to recognize multi-objects and the data of the identified object can be processed by the ballistic computer in realtime.

  1. Autonomic neural control and implications for remote medical monitoring in space.

    Cooke, William H


    Long-duration space travel or extended stays on the moon or Mars will pose new challenges for maintaining and monitoring the health status of astronauts. Remote medical monitoring systems will need to be developed for a number of applications, including providing decision support for care-givers in the event of traumatic injury in space. The focus of this brief review is to introduce potential methods of monitoring astronaut status remotely from simple ECG recordings.

  2. In Silico Investigation of a Surgical Interface for Remote Control of Modular Miniature Robots in Minimally Invasive Surgery

    Apollon Zygomalas


    Full Text Available Aim. Modular mini-robots can be used in novel minimally invasive surgery techniques like natural orifice transluminal endoscopic surgery (NOTES and laparoendoscopic single site (LESS surgery. The control of these miniature assistants is complicated. The aim of this study is the in silico investigation of a remote controlling interface for modular miniature robots which can be used in minimally invasive surgery. Methods. The conceptual controlling system was developed, programmed, and simulated using professional robotics simulation software. Three different modes of control were programmed. The remote controlling surgical interface was virtually designed as a high scale representation of the respective modular mini-robot, therefore a modular controlling system itself. Results. With the proposed modular controlling system the user could easily identify the conformation of the modular mini-robot and adequately modify it as needed. The arrangement of each module was always known. The in silico investigation gave useful information regarding the controlling mode, the adequate speed of rearrangements, and the number of modules needed for efficient working tasks. Conclusions. The proposed conceptual model may promote the research and development of more sophisticated modular controlling systems. Modular surgical interfaces may improve the handling and the dexterity of modular miniature robots during minimally invasive procedures.

  3. Intercross real-time control strategy in alternating activated sludge process for short-cut biological nitrogen removal treating domestic wastewater

    WANG Shuying; ZHANG Shanfeng; PENG chengyao; AKIOTAKIGAWA


    To develop technically feasible and economically favorable dynamic process control (DPC) strategies for an alternating activated sludge (AAS) system, a bench-scale continuous-flow alternating aerobic and anoxic reactor, performing short-cut nitrogen removal from real domestic wastewater was operated under different control strategies for more than five months. A fixed-time control (FTC) study showed that bending-points on pH and oxidation reduction potential (ORP) profiles accurately coincided with the major biological activities. "Ammonia valley" on the pH profile represented the end of nitrification, whereas, the "nitrite knee" on the ORP profile and "nitrite apex" on the pH profile both indicated the end of denitrification. Therefore, a new reliable and effective real-time control strategy was developed using pH and ORP as control parameters, to improve the performance of the AAS process. The online control strategy could achieve up to 87% of the total nitrogen [G1](TN) removal efficiency on an average, and saving approximately 20% aeration energy, as compared to the conventional steady-state control systems. Moreover, stable short-cut nitrification and denitrification were successfully achieved with an average nitrite accumulation ratio of above 95%.

  4. Leadership and New Technologies. New Security Issues for Management of Internet Connectivity and Remote Control in Automotive Industry

    Cosmin Cătălin Olteanu


    Full Text Available The main purpose of the paper is to illustrate the importance of implementing new security policies for infotainment systems in automotive industry. A car is full of technology and is easier today to control car systems through an internet connection linked to car system infotainment. This is how it is possible to gain control of critical car systems. More than 84% of users doesn’t even know the risk of remote control of the car in the presence of Internet connection.

  5. Structural Controls on Groundwater Flow in Basement Terrains: Geophysical, Remote Sensing, and Field Investigations in Sinai

    Mohamed, Lamees


    An integrated [very low frequency (VLF) electromagnetic, magnetic, remote sensing, field, and geographic information system (GIS)] study was conducted over the basement complex in southern Sinai (Feiran watershed) for a better understanding of the structural controls on the groundwater flow. The increase in satellite-based radar backscattering values following a large precipitation event (34 mm on 17–18 January 2010) was used to identify water-bearing features, here interpreted as preferred pathways for surface water infiltration. Findings include: (1) spatial analysis in a GIS environment revealed that the distribution of the water-bearing features (conductive features) corresponds to that of fractures, faults, shear zones, dike swarms, and wadi networks; (2) using VLF (43 profiles), magnetic (7 profiles) techniques, and field observations, the majority (85 %) of the investigated conductive features were determined to be preferred pathways for groundwater flow; (3) northwest–southeast- to north–south-trending conductive features that intersect the groundwater flow (southeast to northwest) at low angles capture groundwater flow, whereas northeast–southwest to east–west features that intersect the flow at high angles impound groundwater upstream and could provide potential productive well locations; and (4) similar findings are observed in central Sinai: east–west-trending dextral shear zones (Themed and Sinai Hinge Belt) impede south to north groundwater flow as evidenced by the significant drop in hydraulic head (from 467 to 248 m above mean sea level) across shear zones and by reorientation of regional flow (south–north to southwest–northeast). The adopted integrated methodologies could be readily applied to similar highly fractured basement arid terrains elsewhere. © 2015 Springer Science+Business Media Dordrecht

  6. Gulf of Mexico Monitoring Via The Remotely Controlled CMR SailBuoy

    Wienders, N.; Hole, L. R.; Peddie, D.


    The CMR SailBuoy is an unmanned ocean vessel capable of traveling the oceans for extended periods of time. It navigates the oceans autonomously - transmitting data at regular intervals using the Iridium network for two way communication. The SailBuoy can be used for a wide variety of ocean applications from measuring ocean and atmospheric parameters to tracking oil spills or acting as a communication relay station for subsea instrumentation. As part of the Deep-C project(Deep Sea to Coast Connectivity in the Eastern Gulf of Mexico), a two month campaign was carried out from March to May 2013 with the purpose of collecting sea surface data (temperature, salinity and oxygen) during the spring bloom. The campaign was unique in that the SailBouy was remotely controlled from Norway after being deployed from the RV Apalachee. The SailBuoy was deployed approximately 11 nautical miles (nm) south of Cape San Blas. During its mission she sailed approximately 840nm on a cruise track across the Gulf coast, from the Florida Panhandle to Louisiana. The SailBuoy project is part of Deep-C's physical oceanography research which seeks to, among other things, understand how particles and dissolved substances (such as oil) travel from the deep sea to the Louisiana, Mississippi, Alabama and Florida shorelines. This involves cross-shelf transport and upwelling mechanisms, which the SailBuoy is capable of measuring. An other focus was the sampling of the Mississippi river plume, which has been shown to influence the distribution of particles, oil, dissolved substances in the water, at least at the surface level. Sea surface salinity measurement via satellite do not provide, at the moment, sufficient resolution and accuracy and instead, the SailBuoy seems to be a very convenient instrument to track river plumes. In this presentation we describe the collected data and include comparisons with high resolution ocean model outputs. We also present further plans for SailBuoy campaigns.

  7. Chromosomal context and epigenetic mechanisms control the efficacy of genome editing by rare-cutting designer endonucleases.

    Daboussi, Fayza; Zaslavskiy, Mikhail; Poirot, Laurent; Loperfido, Mariana; Gouble, Agnès; Guyot, Valerie; Leduc, Sophie; Galetto, Roman; Grizot, Sylvestre; Oficjalska, Danusia; Perez, Christophe; Delacôte, Fabien; Dupuy, Aurélie; Chion-Sotinel, Isabelle; Le Clerre, Diane; Lebuhotel, Céline; Danos, Olivier; Lemaire, Frédéric; Oussedik, Kahina; Cédrone, Frédéric; Epinat, Jean-Charles; Smith, Julianne; Yáñez-Muñoz, Rafael J; Dickson, George; Popplewell, Linda; Koo, Taeyoung; VandenDriessche, Thierry; Chuah, Marinee K; Duclert, Aymeric; Duchateau, Philippe; Pâques, Frédéric


    The ability to specifically engineer the genome of living cells at precise locations using rare-cutting designer endonucleases has broad implications for biotechnology and medicine, particularly for functional genomics, transgenics and gene therapy. However, the potential impact of chromosomal context and epigenetics on designer endonuclease-mediated genome editing is poorly understood. To address this question, we conducted a comprehensive analysis on the efficacy of 37 endonucleases derived from the quintessential I-CreI meganuclease that were specifically designed to cleave 39 different genomic targets. The analysis revealed that the efficiency of targeted mutagenesis at a given chromosomal locus is predictive of that of homologous gene targeting. Consequently, a strong genome-wide correlation was apparent between the efficiency of targeted mutagenesis (≤ 0.1% to ≈ 6%) with that of homologous gene targeting (≤ 0.1% to ≈ 15%). In contrast, the efficiency of targeted mutagenesis or homologous gene targeting at a given chromosomal locus does not correlate with the activity of individual endonucleases on transiently transfected substrates. Finally, we demonstrate that chromatin accessibility modulates the efficacy of rare-cutting endonucleases, accounting for strong position effects. Thus, chromosomal context and epigenetic mechanisms may play a major role in the efficiency rare-cutting endonuclease-induced genome engineering.

  8. 基于GPRS的远程控制技术开发%Development of Remote Control Technology Based On GPRS

    关成斌; 王捷; 邢福成; 孙盛坤


    In this paper, with the advantage of data transmission by GPRS, remote control technology was studied based on GPRS, and was used on a self-made car. The experiment results showed that the remote control technology based on GPRS had many advantages, such as real-time, good stability and economy. At last, remote control technology by general communication used on military field was proposed.%分析了采用GPRS进行数据传输的特点和优势,研究了基于GPRS的远程控制技术,并在一个自制的小车上通过了试验.通过试验验证了采用GPRS技术进行远程控制较采用短消息的方法具有实时性高、稳定性好、经济性好的优势.最后,对采用通用通信技术的远程控制技术在军事上的应用进行了展望.

  9. Reducing radiation exposure during kyphoplasty with the use of a remote control injection system: a prospective study.

    Wang, Jianru; Liu, Hui; Zhang, Kuibo; Li, Bingxue; Yang, Hao; Wang, Hua; Zheng, Zhaomin


    A prospective study. To compare surgeons' radiation exposure during kyphoplasty with and without the use of a remote control injection system. Distance from radiation sources is a critical factor for reducing radiation exposure during spine surgery. A newly designed device was used to minimize operators' radiation exposure during kyphoplasty. Forty-four patients admitted for single-level osteoporotic vertebral compression fracture were randomly divided into 2 groups (groups A and B) and treated with kyphoplasty. The remote control injection system was used only in group B. The radiation doses to the surgeon's eyes, thyroid, chest, and right wrist were recorded with 4 unprotected radiometers simultaneously. Operation time, fluoroscopic time, cement amount, patient-reported pre- and postoperative visual analogue scale scores for pain, and complications were recorded. For group A, the radiation doses at the eyes, thyroid, and right wrist were 1.132 ± 0.104 mSv, 0.647 ± 0.049 mSv, 0.578 ± 0.056 mSv, and 1.877 ± 0.214 mSv, respectively; for Group B, these doses were 0.257 ± 0.067 mSv, 0.201 ± 0.049 mSv, 0.145 ± 0.033 mSv, and 0.353 ± 0.046 mSv, respectively (P remote control injection system can significantly reduce surgeons' radiation exposure without affecting the efficiency of procedures.

  10. The development of Advanced robotic technology - Development of target-tracking algorithm for remote-control robot system

    Park, Dong Sun; Lee, Joon Whan; Kim, Hyong Suk; Yoon, Sook; Lee, Jin Ho; Han, Jeong Soo; Baek, Seong Hyun; Choi, Gap Chu [Chonbuk National University, Chonju (Korea, Republic of)


    The utilization of remote-control robot system in atomic power plants or nuclear-related facilities grows rapidly, to protect workers from high radiation environments. Such applications require complete stability of the robot system, then precisely tracking the robot is essential for the whole system. This research is to accomplish the goal by developing appropriate algorithms for remote-control robot systems. The research consists of two different approaches: target-tracking systems using kalman filters and neural networks. The tracking system under study uses vision sensors to obtain features of targets. A kalman filter model using the moving-position estimation technique is designed, and tested for tracking an object with a circle movement. Attributions of the tracking object are investigated and best features are extracted from the input imagery for the kalman filter model. A neural network tracking system is designed and experimented to trace a robot endeffector. This model is aimed to utilize the excellent capabilities of neural networks; nonlinear mapping between inputs and outputs, learning capability, and generalization capability. The neural tracker consists of two networks for position detection and prediction. Tracking algorithms are developed and experimented for the two models. Results to the experiments show that both models are promising as real-time target-tracking systems for remote-control robot systems. 20 refs., 34 figs. (author)

  11. Comparative study of passively Q-switched c-cut Nd:YVO4/Nd:YAG lasers based on CVD graphene and controlled operation

    Jia, Fuqiang; Liu, Pei; Li, Kang; Chen, Hao; Cheng, Yongjie; Cai, Zhiping; Copner, Nigel


    In this paper, a comparative study of passively Q-switched c-cut Nd:YVO4 and Nd:YAG lasers using four different layers CVD graphene as saturable absorber are demonstrated experimentally for the first time. Moreover, it is successful to accurately control the frequency of repetition rates of the CVD graphern passively Q-switched lasers by pulsed pump. The impacts of laser materials, layers of CVD graphene and cavity length on output parameters are investigated intensively as well, the result shows that the c-cut Nd:YVO4 is a promising laser media compared with Nd:YAG for passively Q-switched lasers based on CVD graphene, as it has better performances in pulse width, pulse energy and peak power. A useful and cost-effective way to generate stable pulsed lasers by CVD graphene or other novel saturable materials are demonstrated.

  12. Design and Implementation of Digital Home Remote Control System%数字家庭远程控制系统设计与实现

    刘海龙; 张春海


    远程控制系统是数字家庭系统的重要组成部分,本文给出了在IPv4网络环境下数字家庭远程控制系统的设计和实现方案,并对远程控制协议进行了详细说明。%Remote Control System is an important part of the Digital Home. This paper describes the design and implementation of Digital Home Remote Control System and Remote Control Protocol in IPv4 network environment.

  13. Remote Query Resonant-Circuit Sensors for Monitoring of Bacteria Growth: Application to Food Quality Control

    Leonidas G. Bachas


    Full Text Available This paper presents a technique for in-situ remote query monitoring of bacteria growth utilizing a printed thin or thick-film sensor comprised of an inductor-capacitor (LC resonant circuit. The sensor, which is placed within the biological medium of interest and remotely detected using a loop antenna, measures the complex permittivity of the medium. Since bacteria growth increases the complex permittivity of a biological medium the LC sensor can be used to determine bacteria concentration. This paper presents results on monitoring of three different bacteria strains, Bacillus subtilis, Escherichia coli JM109, and Pseudomonas putida, demonstrating application of the sensor for monitoring bacteria growth in milk, meat, and beer. Due to its low unit cost and remote query detection, the sensor is potentially useful for commercial scale monitoring of food quality.

  14. Acute effects of remote ischemic preconditioning on cutaneous microcirculation - a controlled prospective cohort study

    Kraemer Robert


    Full Text Available Abstract Background Therapeutic strategies aiming to reduce ischemia/reperfusion injury by conditioning tissue tolerance against ischemia appear attractive not only from a scientific perspective, but also in clinics. Although previous studies indicate that remote ischemic intermittent preconditioning (RIPC is a systemic phenomenon, only a few studies have focused on the elucidation of its mechanisms of action especially in the clinical setting. Therefore, the aim of this study is to evaluate the acute microcirculatory effects of remote ischemic preconditioning on a distinct cutaneous location at the lower extremity which is typically used as a harvesting site for free flap reconstructive surgery in a human in-vivo setting. Methods Microcirculatory data of 27 healthy subjects (25 males, age 24 ± 4 years, BMI 23.3 were evaluated continuously at the anterolateral aspect of the left thigh during RIPC using combined Laser-Doppler and photospectrometry (Oxygen-to-see, Lea Medizintechnik, Germany. After baseline microcirculatory measurement, remote ischemia was induced using a tourniquet on the contralateral upper arm for three cycles of 5 min. Results After RIPC, tissue oxygen saturation and capillary blood flow increased up to 29% and 35% during the third reperfusion phase versus baseline measurement, respectively (both p = 0.001. Postcapillary venous filling pressure decreased statistically significant by 16% during second reperfusion phase (p = 0.028. Conclusion Remote intermittent ischemic preconditioning affects cutaneous tissue oxygen saturation, arterial capillary blood flow and postcapillary venous filling pressure at a remote cutaneous location of the lower extremity. To what extent remote preconditioning might ameliorate reperfusion injury in soft tissue trauma or free flap transplantation further clinical trials have to evaluate. Trial registration NCT01235286

  15. Controlled Remote Preparation of a Two-Qubit State via an Asymmetric Quantum Channel

    WANG Zhang-Yin


    I present a new scheme for probabilistic remote preparation of a general two-qubit state from a sender to either of two receivers.The quantum channel is composed of a partial entangled tripartite Greenberger-Horne-Zeilinger (GHZ) state and a W-type state.I try to realize the remote two-qubit preparation by using the usual projective measurement and the method of positive operator-valued measure, respectively.The corresponding success probabilities of the scheme with different methods as well as the total classical communication cost required in this scheme are also calculated.


    Troy Reed; Stefan Miska; Nicholas Takach; Kaveh Ashenayi; Mark Pickell; Len Volk; Mike Volk; Lei Zhou; Zhu Chen; Crystal Redden; Aimee Washington


    Experiments on the flow loop are continuing. Improvements to the software for data acquisition are being made as additional experience with three-phase flow is gained. Modifications are being made to the Cuttings Injection System in order to improve control and the precision of cuttings injection. The design details for a drill-pipe Rotation System have been completed. A US Patent was filed on October 28, 2002 for a new design for an instrument that can generate a variety of foams under elevated pressures and temperatures and then transfer the test foam to a viscometer for measurements of viscosity. Theoretical analyses of cuttings transport phenomena based on a layered model is under development. Calibrations of two nuclear densitometers have been completed. Baseline tests have been run to determine wall roughness in the 4 different tests sections (i.e. 2-in, 3-in, 4-in pipes and 5.76-in by 3.5-in annulus) of the flow loop. Tests have also been conducted with aerated fluids at EPET conditions. Preliminary experiments on the two candidate aqueous foam formulations were conducted which included rheological tests of the base fluid and foam stability reports. These were conducted after acceptance of the proposal on the Study of Cuttings Transport with Foam Under Elevated Pressure and Elevated Temperature Conditions. Preparation of a test matrix for cuttings-transport experiments with foam in the ACTF is also under way. A controller for instrumentation to measure cuttings concentration and distribution has been designed that can control four transceivers at a time. A prototype of the control circuit board was built and tested. Tests showed that there was a problem with radiated noise. AN improved circuit board was designed and sent to an external expert to verify the new design. The new board is being fabricated and will first be tested with static water and gravel in an annulus at elevated temperatures. A series of viscometer tests to measure foam properties have

  17. Cutting Craters


    [figure removed for brevity, see original site] Released 12 November 2003The rims of two old and degraded impact craters are intersected by a graben in this THEMIS image taken near Mangala Fossa. Yardangs and low-albedo wind streaks are observed at the top of the image as well as interesting small grooves on the crater floor. The origin of these enigmatic grooves may be the result of mud or lava and volatile interactions. Variable surface textures observed in the bottom crater floor are the result of different aged lava flows.Image information: VIS instrument. Latitude -15.2, Longitude 219.2 East (140.8 West). 19 meter/pixel resolution.Note: this THEMIS visual image has not been radiometrically nor geometrically calibrated for this preliminary release. An empirical correction has been performed to remove instrumental effects. A linear shift has been applied in the cross-track and down-track direction to approximate spacecraft and planetary motion. Fully calibrated and geometrically projected images will be released through the Planetary Data System in accordance with Project policies at a later time. NASA's Jet Propulsion Laboratory manages the 2001 Mars Odyssey mission for NASA's Office of Space Science, Washington, D.C. The Thermal Emission Imaging System (THEMIS) was developed by Arizona State University, Tempe, in collaboration with Raytheon Santa Barbara Remote Sensing. The THEMIS investigation is led by Dr. Philip Christensen at Arizona State University. Lockheed Martin Astronautics, Denver, is the prime contractor for the Odyssey project, and developed and built the orbiter. Mission operations are conducted jointly from Lockheed Martin and from JPL, a division of the California Institute of Technology in Pasadena.


    Stefan Miska; Troy Reed; Ergun Kuru


    part of this project, instrumentation was developed to monitor cuttings beds and characterize foams in the flow loop. An ultrasonic-based monitoring system was developed to measure cuttings bed thickness in the flow loop. Data acquisition software controls the system and processes the data. Two foam generating devices were designed and developed to produce foams with specified quality and texture. The devices are equipped with a bubble recognition system and an in-line viscometer to measure bubble size distribution and foam rheology, respectively. The 5-year project is completed. Future research activities will be under the umbrella of Tulsa University Drilling Research Projects. Currently the flow loop is being used for testing cuttings transport capacity of aqueous and polymer-based foams under elevated pressure and temperature conditions. Subsequently, the effect of viscous sweeps on cuttings transport under elevated pressure and temperature conditions will be investigated using the flow loop. Other projects will follow now that the ''steady state'' phase of the project has been achieved.

  19. Development of thick wall welding and cutting tools for ITER

    Nakahira, Masataka; Takahashi, Hiroyuki; Akou, Kentaro; Koizumi, Koichi [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment


    The Vacuum Vessel, which is a core component of International Thermonuclear Experimental Reactor (ITER), is required to be exchanged remotely in a case of accident such as superconducting coil failure. The in-vessel components such as blanket and divertor are planned to be exchanged or fixed. In these exchange or maintenance operations, the thick wall welding and cutting are inevitable and remote handling tools are necessary. The thick wall welding and cutting tools for blanket are under developing in the ITER R and D program. The design requirement is to weld or cut the stainless steel of 70 mm thickness in the narrow space. Tungsten inert gas (TIG) arc welding, plasma cutting and iodine laser welding/cutting are selected as primary option. Element welding and cutting tests, design of small tools to satisfy space requirement, test fabrication and performance tests were performed. This paper reports the tool design and overview of welding and cutting tests. (author)

  20. Remote Health Consultations Supported by a Diabetes Management Web Application With a New Glucose Meter Demonstrates Improved Glycemic Control.

    Grady, Mike; Cameron, Hilary; Levy, Brian L; Katz, Laurence B


    Cloud-connected diabetes applications enable health care professionals (HCPs) to monitor patient progress and offer the potential for remote consultations. OneTouch Reveal (OTR) is a cloud-based web application that aggregates data from blood glucose (BG) meters or insulin pumps and provides analytics to help patients and HCPs make more informed treatment and lifestyle decisions. This study assessed the experience of patients using OTR and the OneTouch Verio (OTV) BG meter and determined the extent of changes in glycemic control. Subjects with T1DM (23) or T2DM (17) uploaded BG meter results to OTR for 12 weeks. HCPs remotely reviewed progress using OTR and delivered telephone consultations at 4 and 8 weeks based on OTR insights. After 12 weeks, mean HbA1c decreased by 0.4% (P web application in combination with the OTV meter helped subjects with T1DM and T2DM effectively manage their diabetes and was associated with improved BG control over 12 weeks. Real-time visibility to subject data may help HCPs deliver focused and effective remote consultations. © 2015 Diabetes Technology Society.