WorldWideScience

Sample records for relief surveys methodic

  1. Safety relief valve alternate analysis method

    International Nuclear Information System (INIS)

    Adams, R.H.; Javid, A.; Khatua, T.P.

    1981-01-01

    An experimental test program was started in the United States in 1976 to define and quantify Safety Relief Valve (SRV) phenomena in General Electric Mark I Suppression Chambers. The testing considered several discharged devices and was used to correlate SRV load prediction models. The program was funded by utilities with Mark I containments and has resulted in a detailed SRV load definition as a portion of the Mark I containment program Load Definition Report (LDR). The (USNRC) has reviewed and approved the LDR SRV load definition. In addition, the USNRC has permitted calibration of structural models used for predicting torus response to SRV loads. Model calibration is subject to confirmatory in-plant testing. The SRV methodology given in the LDR requires that transient dynamic pressures be applied to a torus structural model that includes a fluid added mass matrix. Preliminary evaluations of torus response have indicated order of magnitude conservatisms, with respect to test results, which could result in unrealistic containment modifications. In addition, structural response trends observed in full-scale tests between cold pipe, first valve actuation and hot pipe, subsequent valve actuation conditions have not been duplicated using current analysis methods. It was suggested by others that an energy approach using current fluid models be utilized to define loads. An alternate SRV analysis method is defined to correct suppression chamber structural response to a level that permits economical but conservative design. Simple analogs are developed for the purpose of correcting the analytical response obtained from LDR analysis methods. Analogs evaluated considered forced vibration and free vibration structural response. The corrected response correlated well with in-plant test response. The correlation of the analytical model at test conditions permits application of the alternate analysis method at design conditions. (orig./HP)

  2. Surveys right after the atomic bombing and a relief squad

    Energy Technology Data Exchange (ETDEWEB)

    Mine, Mariko [Nagasaki Univ. (Japan). School of Medicine

    1998-12-01

    An outline of four survey reports right after the atomic bombing in Nagasaki and Hiroshima is introduced. The report of Manhattan District Atomic Bomb Investigating Groups: The subjects of this survey were 900 inpatients in Nagasaki (for 16 days from September 20) and Hiroshima (for 5 days from October 3). Two hundreds and forty-nine patients (16%) died. In cases died without injury, the severe symptoms were alopecia, purpura, hemorrhage, oral cavity and pharynx lesion, vomiting, diarrhea and fever. The residual radioactivity measured at six weeks later was 6-25 roentgen in Hiroshima and 30-110 roentgen in Nagasaki (Nishiyama riverhead area). These values were lower than the predicted value from the clinical consequence. The report of Joint Commission for the Investigation of the Atomic Bomb: Following the above survey, about 6500 subjects were investigated both in Nagasaki and Hiroshima. Incidence of alopecia was investigated by shielded situation at a spot of 2.1 to 2.5 km from a blast center. It was 7.2% of outdoors (shielded: 7.3%, non-shielded: 17.4%) and 2.9% of indoors. The report of the Special Committee for Atomic Bomb Casualty Investigation and Research of the Scientific Research Council of Japan: General part of the report consists of medical part and physical part, and reports from each university were classified and listed in the supplement. Survey of Nagasaki Medical College (not in public): About 8000 subjects were investigated from October to December. Data were gathered up about lethality, time of death, injury and radiation sickness, etc. There was also autograph of a relief squad of the Nagasaki Medical College. (K.H.)

  3. Pain relief in labor: a survey of awareness, attitude, and practice of health care providers in Zaria, Nigeria

    Directory of Open Access Journals (Sweden)

    Ogboli-Nwasor E

    2011-08-01

    Full Text Available E Ogboli-Nwasor1, SE Adaji2, SB Bature2, OS Shittu21Department of Anesthesia, 2Department of Obstetrics and Gynecology, Ahmadu Bello University Teaching Hospital, Zaria, NigeriaBackground: The purpose of this study was to assess the attitudes of maternal health care providers to pain relief during labor in Zaria, Nigeria.Methods: This was a multicenter, collaborative, cross-sectional pilot study of provider perspectives concerning pain relief during labor. A structured, self-administered, questionnaire was completed by 95 consenting maternal health care providers at three high-volume facilities in Zaria, an ancient northern Nigerian city. Descriptive statistics was performed on the data.Results: Most respondents (94.8% agreed that pain relief is needed during labor. Only 2.1% of respondents were undecided about the provision of pain relief during labor and 3.2% were of the opinion that pain relief was not necessary during labor. Most respondents (93.7% had attended a woman in labor in the 4 weeks preceding the survey. Of these, 56.8% had counseled a parturient in labor. Most of the counseling (42.1% took place during labor. Less than half of the respondents (48.4% had administered pain relief in labor in the preceding 4 weeks and systemic opioids was the most commonly form of pain relief. Among the respondents who did not offer pain relief agents in labor, the majority (54.5% had no reason for not offering it. Unavailability of methods, inability to afford the cost of pain relief, lack of knowledge and skills, as well as lack of essential equipment to provide the procedure were also given by respondents as reasons for not offering pain relief.Conclusion: Even though maternal health care providers in this environment have a positive attitude to pain relief in labor, most women go through labor without the benefit of analgesia. There exists a gap between provider attitudes to pain relief in labor and practice of the same, with many providers

  4. A survey of Chinese nurses' guidance to parents in children's postoperative pain relief.

    Science.gov (United States)

    He, Hong-Gu; Pölkki, Tarja; Pietilä, Anna-Maija; Vehviläinen-Julkunen, Katri

    2005-10-01

    The aim of the study was to describe parental guidance provided by Chinese nurses regarding non-pharmacological methods in children's surgical pain relief as well as factors related to this. Parental involvement in children's pain management has been acknowledged and encouraged in recent years. However, parents' lack of related information has been pointed out and little is known about how parents are guided to use non-pharmacological methods to relieve the pain. A previously validated European questionnaire survey was conducted in 2002. Structured questionnaires were distributed to all 187 nurses working at 12 surgical wards in five hospitals of Fujian Province, China. The average response rate was 98%. The results show that nurses informed parents of the majority of cognitive information. The most commonly guided non-pharmacological methods were distraction, positive reinforcement, comforting/reassurance, positioning and relaxation. Nurses' background factors, including age, education, nursing position, professional work experience, number of their own children and experiences of earlier hospitalizations of their children, were significantly related to their perceptions regarding parental guidance. Chinese nurses provided much guidance to parents on non-pharmacological methods. However, the results show that sensory information and physical methods were poorly conveyed to parents, which needs future attention to reinforce parents' active role in pain management. This study provides new information on Chinese nurses' guiding parents to use non-pharmacological methods in pain alleviation, thereby contributing to the body of knowledge on this subject. Furthermore, the study makes the respondents aware of the importance of involving parents in their child's pain management.

  5. Heat Retreat Locations in Cities - The Survey-Based Location Analysis of Heat Relief

    Science.gov (United States)

    Neht, Alice; Maximini, Claudia; Prenger-Berninghoff, Kathrin

    2017-12-01

    The adaptation of cities to climate change effects is one of the major strategies in urban planning to encounter the challenges of climate change (IPCC 2014). One of the fields of climate change adaption is dealing with heat events that occur more frequently and with greater intensity. Cities in particular are vulnerable to these events due to high population and infrastructure density. Proceeding urbanization calls for the existence of sufficient heat retreat locations (HRL) to enable relief for the population from heat in summer. This is why an extensive analysis of HRL is needed. This paper aims at the development of a survey-based location analysis of heat relief by identifying user groups, locations and characteristics of HRL based on a home survey that was conducted in three German cities. Key results of the study show that the majority of the participants of the survey are users of existing HRL, are affected by heat, and perceive heat as a burden in summer. Moreover, HRL that are located in close proximity are preferred by most users while their effect depends on the regional context that has to be considered in the analysis. Hence, this research presents an approach to heat relief that underlines the importance of HRL in cities by referring to selected examples of HRL types in densely populated areas of cities. HRL should especially be established and secured in densely built-up areas of cities. According to results of the survey, most HRL are located in public spaces, and the overall accessibility of HRL turned out to be an issue.

  6. Modelling the Influence of Ground Surface Relief on Electric Sounding Curves Using the Integral Equations Method

    Directory of Open Access Journals (Sweden)

    Balgaisha Mukanova

    2017-01-01

    Full Text Available The problem of electrical sounding of a medium with ground surface relief is modelled using the integral equations method. This numerical method is based on the triangulation of the computational domain, which is adapted to the shape of the relief and the measuring line. The numerical algorithm is tested by comparing the results with the known solution for horizontally layered media with two layers. Calculations are also performed to verify the fulfilment of the “reciprocity principle” for the 4-electrode installations in our numerical model. Simulations are then performed for a two-layered medium with a surface relief. The quantitative influences of the relief, the resistivity ratios of the contacting media, and the depth of the second layer on the apparent resistivity curves are established.

  7. A computational method to predict fluid-structure interaction of pressure relief valves

    Energy Technology Data Exchange (ETDEWEB)

    Kang, S. K.; Lee, D. H.; Park, S. K.; Hong, S. R. [Korea Electric Power Research Institute, Taejon (Korea, Republic of)

    2004-07-01

    An effective CFD (Computational fluid dynamics) method to predict important performance parameters, such as blowdown and chattering, for pressure relief valves in NPPs is provided in the present study. To calculate the valve motion, 6DOF (six degree of freedom) model is used. A chimera overset grid method is utilized to this study for the elimination of grid remeshing problem, when the disk moves. Further, CFD-Fastran which is developed by CFD-RC for compressible flow analysis is applied to an 1' safety valve. The prediction results ensure the applicability of the presented method in this study.

  8. Survey of plants popularly used for pain relief in Rio Grande do Sul, southern Brazil

    Directory of Open Access Journals (Sweden)

    Eveline D. Stolz

    Full Text Available Ethnobotanical data can be an important tool in the search for new drugs. The Brazilian Health Surveillance Agency accepts the registration of herbal medicines based on ethnopharmacological and ethnobotanical studies. With the purpose of increasing the knowledge of potentially useful plants for the treatment of painful conditions, we analyzed the ethnobotanical studies carried out in Rio Grande do Sul state (RS-Southern Brazil; we had access to nineteen studies.To our knowledge, this is the first compilation of ethnobotanical studies that focus on pain relief carried out in RS. The species native to RS cited in at least nine (about 50% of these studies were selected. The search retrieved 28 native species cited as used to alleviate painful conditions, which are distributed in eighteen botanical families, being Asteraceae the most mentioned. The species more frequently cited for pain relief were Achyrocline satureioides, Baccharis articulata, Baccharis crispa, Lepidium didymum, Eugenia uniflora and Maytenus ilicifolia. The only species not reported in any pre-clinical study associated with pain relief was B. articulata. Among the six species cited, no studies on clinical efficacy were found. In conclusion, the folk use of native plants with therapeutic purposes is widespread in RS State (Brazil, being pain relief an important property.

  9. Formation of random and regular relief-phase structures on silver halide photographic emulsions by holographic methods

    Science.gov (United States)

    Ganzherli, N. M.; Gulyaev, S. N.; Gurin, A. S.; Kramushchenko, D. D.; Maurer, I. A.; Chernykh, D. F.

    2009-07-01

    The formation of diffusers and microlens rasters on silver halide emulsions by holographic methods is considered. Two techniques for converting amplitude holographic recording to relief-phase recording, selective curing and irradiation of the emulsion gelatin by short-wavelength UV radiation, are compared.

  10. ReliefF-Based EEG Sensor Selection Methods for Emotion Recognition.

    Science.gov (United States)

    Zhang, Jianhai; Chen, Ming; Zhao, Shaokai; Hu, Sanqing; Shi, Zhiguo; Cao, Yu

    2016-09-22

    Electroencephalogram (EEG) signals recorded from sensor electrodes on the scalp can directly detect the brain dynamics in response to different emotional states. Emotion recognition from EEG signals has attracted broad attention, partly due to the rapid development of wearable computing and the needs of a more immersive human-computer interface (HCI) environment. To improve the recognition performance, multi-channel EEG signals are usually used. A large set of EEG sensor channels will add to the computational complexity and cause users inconvenience. ReliefF-based channel selection methods were systematically investigated for EEG-based emotion recognition on a database for emotion analysis using physiological signals (DEAP). Three strategies were employed to select the best channels in classifying four emotional states (joy, fear, sadness and relaxation). Furthermore, support vector machine (SVM) was used as a classifier to validate the performance of the channel selection results. The experimental results showed the effectiveness of our methods and the comparison with the similar strategies, based on the F-score, was given. Strategies to evaluate a channel as a unity gave better performance in channel reduction with an acceptable loss of accuracy. In the third strategy, after adjusting channels' weights according to their contribution to the classification accuracy, the number of channels was reduced to eight with a slight loss of accuracy (58.51% ± 10.05% versus the best classification accuracy 59.13% ± 11.00% using 19 channels). In addition, the study of selecting subject-independent channels, related to emotion processing, was also implemented. The sensors, selected subject-independently from frontal, parietal lobes, have been identified to provide more discriminative information associated with emotion processing, and are distributed symmetrically over the scalp, which is consistent with the existing literature. The results will make a contribution to the

  11. ReliefF-Based EEG Sensor Selection Methods for Emotion Recognition

    Directory of Open Access Journals (Sweden)

    Jianhai Zhang

    2016-09-01

    Full Text Available Electroencephalogram (EEG signals recorded from sensor electrodes on the scalp can directly detect the brain dynamics in response to different emotional states. Emotion recognition from EEG signals has attracted broad attention, partly due to the rapid development of wearable computing and the needs of a more immersive human-computer interface (HCI environment. To improve the recognition performance, multi-channel EEG signals are usually used. A large set of EEG sensor channels will add to the computational complexity and cause users inconvenience. ReliefF-based channel selection methods were systematically investigated for EEG-based emotion recognition on a database for emotion analysis using physiological signals (DEAP. Three strategies were employed to select the best channels in classifying four emotional states (joy, fear, sadness and relaxation. Furthermore, support vector machine (SVM was used as a classifier to validate the performance of the channel selection results. The experimental results showed the effectiveness of our methods and the comparison with the similar strategies, based on the F-score, was given. Strategies to evaluate a channel as a unity gave better performance in channel reduction with an acceptable loss of accuracy. In the third strategy, after adjusting channels’ weights according to their contribution to the classification accuracy, the number of channels was reduced to eight with a slight loss of accuracy (58.51% ± 10.05% versus the best classification accuracy 59.13% ± 11.00% using 19 channels. In addition, the study of selecting subject-independent channels, related to emotion processing, was also implemented. The sensors, selected subject-independently from frontal, parietal lobes, have been identified to provide more discriminative information associated with emotion processing, and are distributed symmetrically over the scalp, which is consistent with the existing literature. The results will make a

  12. The Effect of Different Local Anesthesia Methods on Pain Relief in Outpatient Endometrial Biopsy: Randomized Clinical Trial

    Directory of Open Access Journals (Sweden)

    Elaheh Olad-Saheb-Madarek

    2013-08-01

    Full Text Available Introduction: Endometrial biopsy is necessary for diagnosing the reason of abnormal uterine bleeding in perimenopausal women. Currently outpatient endometrial biopsy is used for evaluation of abnormal uterine bleeding which is associated with moderate to severe pain. Using lidocaine is one of the procedures which is used for pain relief while biopsy. This study is aimed at comparing the effect of different local anesthesia procedures on pain relief during endometrial biopsy. Methods: In this randomized clinical trial, 160 multiparous 40-55 years old women with AUB, candidates for endometrial biopsy, were randomly assigned into four equal groups, to receive: 1-intrauterine lidocaine; 2-cervical spray lidocaine; 3- intrauterine lidocaine plus cervical spray lidocaine; or 4-intrauterine distilled water. Pain relief was measured at 3 different times: during endometrial biopsy, just after and 15 minutes after biopsy. Results: Pain intensity was reduced significantly at different times in intrauterine lidocaine and intrauterine lidocaine with cervical spray lidocaine receivers in compare with the groups which received cervical spray lidocaine and distilled water. The mean of difference pain relief during biopsy and 15 minutes after that was reduced significantly in the group which received intrauterine lidocaine and intrauterine lidocaine with cervical spray lidocaine in comparison with the other two groups. Conclusion: Intrauterine lidocaine was effective during endometrial biopsy, and using it with cervical spray lidocaine had no more beneficial effect.

  13. Selecting boundary conditions in physiological strain analysis of the femur: Balanced loads, inertia relief method and follower load.

    Science.gov (United States)

    Heyland, Mark; Trepczynski, Adam; Duda, Georg N; Zehn, Manfred; Schaser, Klaus-Dieter; Märdian, Sven

    2015-12-01

    Selection of boundary constraints may influence amount and distribution of loads. The purpose of this study is to analyze the potential of inertia relief and follower load to maintain the effects of musculoskeletal loads even under large deflections in patient specific finite element models of intact or fractured bone compared to empiric boundary constraints which have been shown to lead to physiological displacements and surface strains. The goal is to elucidate the use of boundary conditions in strain analyses of bones. Finite element models of the intact femur and a model of clinically relevant fracture stabilization by locking plate fixation were analyzed with normal walking loading conditions for different boundary conditions, specifically re-balanced loading, inertia relief and follower load. Peak principal cortex surface strains for different boundary conditions are consistent (maximum deviation 13.7%) except for inertia relief without force balancing (maximum deviation 108.4%). Influence of follower load on displacements increases with higher deflection in fracture model (from 3% to 7% for force balanced model). For load balanced models, follower load had only minor influence, though the effect increases strongly with higher deflection. Conventional constraints of fixed nodes in space should be carefully reconsidered because their type and position are challenging to justify and for their potential to introduce relevant non-physiological reaction forces. Inertia relief provides an alternative method which yields physiological strain results. Copyright © 2015 IPEM. Published by Elsevier Ltd. All rights reserved.

  14. A new analgesic method, two-minute sciatic nerve press, for immediate pain relief: a randomized trial

    Directory of Open Access Journals (Sweden)

    Zhang Fenglin

    2008-01-01

    Full Text Available Abstract Background Current analgesics have drawbacks such as delays in acquisition, lag-times for effect, and side effects. We recently presented a preliminary report of a new analgesic method involving a two-minute sciatic nerve press, which resulted in immediate short-term relief of pain associated with dental and renal diseases. The present study investigated whether this technique was effective for pain associated with other disease types, and whether the relief was effective for up to one hour. Methods This randomized, placebo-controlled, parallel-group trial was conducted in four hospitals in Anhui Province, China. Patients with pain were sequentially recruited by participating physicians during clinic visits, and 135 patients aged 15 – 80 years were enrolled. Dental disease patients included those with acute pulpitis and periapical abscesses. Renal disease patients included those with kidney infections and/or stones. Tumor patients included those with nose, breast, stomach and liver cancers, while Emergency Room patients had various pathologies. Patients were randomly assigned to receive a "sciatic nerve press" in which pressure was applied simultaneously to the sciatic nerves at the back of both thighs, or a "placebo press" in which pressure was applied to a parallel region on the front of the thighs. Each fist applied a pressure of 11 – 20 kg for 2 minutes. Patients rated their level of pain before and after the procedure. Results The "sciatic nerve press" produced immediate relief of pain in all patient groups. Emergency patients reported a 43.5% reduction in pain (p th minutes, and the relief decreased 47% by the 60th minutes. Conclusion Two minutes of pressure on both sciatic nerves produced immediate significant short-term conduction analgesia. This technique is a convenient, safe and powerful method for the short-term treatment of clinical pain associated with a diverse range of pathologies. Trial registration Current

  15. Why are older peoples' health needs forgotten post-natural disaster relief in developing countries? A healthcare provider survey of 2005 Kashmir, Pakistan earthquake.

    Science.gov (United States)

    Chan, Emily Ying Yang

    2009-01-01

    Although older people may be recognized as a vulnerable group post-natural disasters, their particular needs are rarely met by the providers of emergency services. Studies about older people's health needs post disasters in the South East Asia Tsunami, Kashmir, Pakistan, China, and United States has revealed the lack of concern for older people's health needs. Recent study of older people's health needs post the Kashmir Pakistan earthquake (2005) found older peoples' health needs were masked within the general population. This survey study examines the providers' perceptions of older people's vulnerabilities post-2005 Pakistan earthquake. It aims to understand the awareness of geriatric issues and issues related to current service provision/planning for older people's health needs post disasters. Specifically, service delivery patterns will be compared among different relief agencies. Cross-sectional, structured stakeholder interviews were conducted within a 2 weeks period in February 2006, 4 months post-earthquake in Pakistan-administrated Kashmir. Health/medical relief agencies of three different types of organizational nature: international nongovernmental organization (INGO), national organization, and local/community group were solicited to participate in the study. Descriptive analysis was conducted. Important issues identified include the need to sensitize relief and health workers about older people's health needs post disaster the development of relevant clinical guidelines for chronic disease management postdisaster in developing countries and the advocacy of building in geriatric related components in natural disaster medical relief programs. To effectively address the vulnerability of older people, it is important for governments, relief agencies, and local partners to include and address these issues during their relief operations and policy planning.

  16. Assessment of oral health status among endosulfan victims in endosulfan relief and remediation cell - A cross-sectional survey

    Directory of Open Access Journals (Sweden)

    Mundoor Manjunath Dayakar

    2015-01-01

    Full Text Available Background: Endosulfan is a highly toxic agrichemical used in the cashew plantations. The Stockholm Convention held in April 2011 recommended a global ban on the manufacture and use of endosulfan because of its adverse effects on human health and the environment. Its impact on the quality of food, water, and beverages; and its ability to cause neurobehavioral disorders, congenital malformations in female subjects, and abnormalities related to the male reproductive system are studied, but however information regarding the oral health of endosulfan victims is scant. Objectives: To assess the oral health status of the endosulfan victim in rehabilitation center. Method and Methodology: A cross sectional study on 18 subjects of 4-50 years of age were interviewed and examined using modified WHO oral health assessment proforma (1997 in Endosulfan Relief and Remediation Cell in Kokkada, Belthangady Taluk, Dakshina Kannada district, Karnataka, India. Results: Among the subjects, 10 (>50% were found to be in age group <20 years. The overall oral health status of the endosulfan victim's in rehabilitation center considered to be poor, as many of the subjects suffered from major medical problems like mental retardation, physical disabilities etc. Conclusion: This study emphasizes the need for special attention from government and voluntary organization to improve overall health status of the victims.

  17. The Effect of Non-Pharmacological Methods of Labor Pain Relief on Mothers’ Perceived Stress: ARandomized Controlled Trial

    Directory of Open Access Journals (Sweden)

    Mojghan Mirghafourvand

    2014-12-01

    Full Text Available Background & objectives: Childbirth is the most stressful event for the women both mentally and physically affecting their physiological and psychological indicators during labour. The aim of this study was to assess the effect of non-pharmacological methods of labor pain relief in mothers’ perceived stress conducted in Alavi hospital of Ardabil, 2013.  Methods: In this double blind randomized controlled trial, 320 mothers were allocated into two groups by stratified block randomization . The intervention group (n=158 received continuous support throughout the labour process, positioning and movement, music, aromatherapy, showering andconsumption of a light diet or water.The control group received only a routine care. The perceived stress scale (PSS was employed to collect data in three stages at the beginning of the active phase, before the intervention, six hours after birth and then eight weeks postpartum. The two groupswere compared using General Linear Model with controlling the baseline scores. Results: There were 14 participants loss to follow-up. The mean of perceived stress score in the intervention group was significantly lower than the control group at 6 hours [adjusted mean difference: -1.0 (95% confidence interval: -0.01 to -1.9]. However, there was no difference between two groups in terms of perceived stress score at 8 weeks postpartum (p=0.692.  Conclusion: Non-pharmacological methods of labor pain relief are an effective intervention for reducing perceived stress level in mothers during labor and therefore use of this intervention is recommended.

  18. Groundbreaking approach to disaster relief

    OpenAIRE

    2008-01-01

    The humanitarian response to Cyclone Nargis, which struck Myanmar on 2 and 3 May, heralds a fundamentally new approach to relief coordination. As a result, a unique survey showed what really happened to the survivors. Sarah Cumberland reports.

  19. Methods of the National Nutrition Survey 1999

    OpenAIRE

    Resano-Pérez, Elsa; Méndez-Ramírez, Ignacio; Shamah-Levy, Teresa; Rivera, Juan A; Sepúlveda-Amor, Jaime

    2003-01-01

    OBJECTIVE: To describe the methods and analyses of the 1999 National Nutrition Survey (NNS-99). MATERIAL AND METHODS: The 1999 National Nutrition Survey (NNS-99) is a probabilistic survey with nationwide representativity. The NNS-99 included four regions and urban and rural areas of Mexico. The last sampling units were households, selected through stratified cluster sampling. The study population consisted of children under five years of age, school-age children (6-11 years), and women of chi...

  20. Alternative medicine - pain relief

    Science.gov (United States)

    Acupuncture - pain relief; Hypnosis - pain relief; Guided imagery - pain relief ... neck, shoulder, knee, or elbow) Osteoarthritis Rheumatoid arthritis Hypnosis is a focused state of concentration. With self- ...

  1. Moving beyond Traditional Methods of Survey Validation

    Science.gov (United States)

    Maul, Andrew

    2017-01-01

    In his focus article, "Rethinking Traditional Methods of Survey Validation," published in this issue of "Measurement: Interdisciplinary Research and Perspectives," Andrew Maul wrote that it is commonly believed that self-report, survey-based instruments can be used to measure a wide range of psychological attributes, such as…

  2. Survey Research: Methods, Issues and the Future

    Science.gov (United States)

    Brewer, Ernest W.; Torrisi-Steele, Geraldine; Wang, Victor C. X.

    2015-01-01

    Survey research is prevalent among many professional fields. Both cost effective and time efficient, this method of research is commonly used for the purposes of gaining insight into the attitudes, thoughts, and opinions of populations. Additionally, because there are several types of survey research designs and data collection instruments, the…

  3. Parents' knowledge, attitudes, use of pain relief methods and satisfaction related to their children's postoperative pain management: a descriptive correlational study.

    Science.gov (United States)

    Chng, Hui Yi; He, Hong-Gu; Chan, Sally Wai-Chi; Liam, Joanne Li Wee; Zhu, Lixia; Cheng, Karis Kin Fong

    2015-06-01

    To examine parents' knowledge about and attitudes towards pain management, use of pain relief strategies and satisfaction with their children's postoperative pain management, as well as the relationships among these variables. Children's postoperative pain is inadequately managed worldwide. Despite increasing emphasis on parental involvement in children's postoperative pain management, few studies have examined parents' management of their child's postoperative pain in Singapore. A descriptive correlational study. A convenience sample of 60 parents having 6- to 14-year-old children undergoing inpatient elective surgery in a public hospital in Singapore was recruited. Data were collected one day after each child's surgery using the Pain Management Knowledge and Attitudes questionnaire and the Parents' Use of Pain Relief Strategies questionnaire. Descriptive statistics, Mann-Whitney U tests, Kruskal-Wallis tests and Spearman's rank correlation coefficient were used for data analyses. Parents displayed moderate levels of knowledge, attitudes and use of pain relief methods in relation to their children's postoperative pain and pain management. They were generally satisfied with the management of their child's postoperative pain. There was significant difference in Parents' Use of Pain Relief Strategies scores between parents with and without previous experience of caring for their hospitalised child. Statistically significant positive correlations were found between parents' knowledge and attitude, knowledge and satisfaction, attitude and satisfaction, knowledge and pain relief strategies, as well as attitude and pain relief strategies. This study indicates the need to provide parents with more information regarding their children's postoperative pain management. Future studies are needed to develop educational interventions for parents to improve their knowledge and attitudes, which will eventually improve their use of pain relief strategies for their children. Health

  4. Survey Methods, Traditional, Public Opinion Polling

    DEFF Research Database (Denmark)

    Elmelund-Præstekær, Christian; Hopmann, David Nicolas; Pedersen, Rasmus Tue

    2017-01-01

    Traditional public opinion polls are surveys in which a random sample of a given population is asked questions about their attitudes, knowledge, or behavior. If conducted properly, the answers from such surveys are approximately representative of the entire population. Traditional public opinion...... polling is typically based on four different methods of data gathering, or combinations hereof: face-to-face, postal surveys, phone surveys, and web surveys. Given that opinion polls are based on a sample, we cannot be sure that the sample reflects public opinion perfectly, however—even if randomness...... is perfect. Moreover, responses may be highly dependent on the contextual information provided with the question. Also, it may be difficult to capture past or complex causes of attitudes or behavior. In short, surveys are a precise way of measuring public opinion, but they do not come without challenges....

  5. Shadow analysis of soil surface roughness compared to the chain set method and direct measurement of micro-relief

    Directory of Open Access Journals (Sweden)

    R. García Moreno

    2010-08-01

    Full Text Available Soil surface roughness (SSR expresses soil susceptibility to wind and water erosion and plays an important role in the development and the maintenance of soil biota. Several methods have been developed to characterise SSR based on different methods of acquiring data. Because the main problems related to these methods involve the use and handling of equipment in the field, the present study aims to fill the need for a method for measuring SSR that is more reliable, low-cost and convenient in the field than traditional field methods. Shadow analysis, which interprets micro-topographic shadows, is based on the principle that there is a direct relationship between the soil surface roughness and the shadows cast by soil structures under fixed sunlight conditions. SSR was calculated with shadows analysis in the laboratory using hemispheres of different diameter with a diverse distribution of known altitudes and a surface area of 1 m2.

    Data obtained from the shadow analysis were compared to data obtained with the chain method and simulation of the micro-relief. The results show a relationship among the SSR calculated using the different methods. To further improve the method, shadow analysis was used to measure the SSR in a sandy clay loam field using different tillage tools (chisel, tiller and roller and in a control of 4 m2 surface plots divided into subplots of 1 m2. The measurements were compared to the data obtained using the chain set and pin meter methods. The SSR measured was the highest when the chisel was used, followed by the tiller and the roller, and finally the control, for each of the three methods. Shadow analysis is shown to be a reliable method that does not disturb the measured surface, is easy to handle and analyse, and shortens the time involved in field operations by a factor ranging from 4 to 20 compared to well known techniques such as the chain set and pin meter methods.

  6. Y-STR frequency surveying method

    DEFF Research Database (Denmark)

    Willuweit, Sascha; Caliebe, Amke; Andersen, Mikkel Meyer

    2011-01-01

    Reasonable formalized methods to estimate the frequencies of DNA profiles generated from lineage markers have been proposed in the past years and were discussed in the forensic community. Recently, collections of population data on the frequencies of variations in Y chromosomal STR profiles have...... reached a new quality with the establishment of the comprehensive neatly quality-controlled reference database YHRD. Grounded on such unrivalled empirical material from hundreds of populations studies the core assumption of the Haplotype Frequency Surveying Method originally described 10 years ago can...... be tested and improved. Here we provide new approaches to calculate the parameters used in the frequency surveying method: a maximum likelihood estimation of the regression parameters (r1, r2, s1 and s2) and a revised Frequency Surveying framework with variable binning and a database preprocessing to take...

  7. Survey of electronic payment methods and systems

    NARCIS (Netherlands)

    Havinga, Paul J.M.; Smit, Gerardus Johannes Maria; Helme, A.; Verbraeck, A.

    1996-01-01

    In this paper an overview of electronic payment methods and systems is given. This survey is done as part of the Moby Dick project. Electronic payment systems can be grouped into three broad classes: traditional money transactions, digital currency and creditdebit payments. Such payment systems have

  8. A New Method of Stress Measurement Based upon Elastic Deformation of Core Sample with Stress Relief by Drilling

    Science.gov (United States)

    Ito, T.; Funato, A.; Tamagawa, T.; Tezuka, K.; Yabe, Y.; Abe, S.; Ishida, A.; Ogasawara, H.

    2017-12-01

    When rock is cored at depth by drilling, anisotropic expansion occurs with the relief of anisotropic rock stresses, resulting in a sinusoidal variation of core diameter with a period of 180 deg. in the core roll angle. The circumferential variation of core diameter is given theoretically as a function of rock stresses. These new findings can lead various ideas to estimate the rock stress from circumferential variation of core diameter measured after the core retrieving. In the simplest case when a single core sample is only available, the difference between the maximum and minimum components of rock stress in a plane perpendicular to the drilled hole can be estimated from the maximum and minimum core diameters (see the detail in, Funato and Ito, IJRMMS, 2017). The advantages of this method include, (i) much easier measurement operation than those in other in-situ or in-lab estimation methods, and (ii) applicability in high stress environment where stress measurements need pressure for packers or pumping system for the hydro-fracturing methods higher than their tolerance levels. We have successfully tested the method at deep seismogenic zones in South African gold mines, and we are going to apply it to boreholes collared at 3 km depth and intersecting a M5.5 rupture plane several hundred meters below the mine workings in the ICDP project of "Drilling into Seismogenic zones of M2.0 - M5.5 earthquakes in deep South African gold mines" (DSeis) (e.g., http://www.icdp-online.org/projects/world/africa/orkney-s-africa/details/). If several core samples with different orientation are available, all of three principal components of 3D rock stress can be estimated. To realize this, we should have several boreholes drilled in different directions in a rock mass where the stress field is considered to be uniform. It is commonly carried out to dill boreholes in different directions from a mine gallery. Even in a deep borehole drilled vertically from the ground surface, the

  9. Laparoscopic Adhesiolysis and Relief of Chronic Pelvic Pain

    OpenAIRE

    Nezhat, Farr R.; Crystal, Ruth Ann; Nezhat, Ceana H.; Nezhat, Camran R.

    2000-01-01

    Objective: To evaluate the short- and long-term results of laparoscopic enterolysis in patients with chronic pelvic pain following hysterectomy. Methods: Forty-eight patients were evaluated at time intervals from 2 weeks to 5 years after laparoscopic enterolysis. Patients were asked to rate postoperative relief of their pelvic pain as complete/near complete relief (80-100% pain relief), significant relief (50-80% pain relief), or less than 50% or no pain relief. Results: We found that after 2...

  10. Underwater photography - A visual survey method

    Digital Repository Service at National Institute of Oceanography (India)

    Sharma, R.

    Content-Type text/plain; charset=UTF-8 173 Underwater photography - A visual survey method Rahul Sharma National Institute of Oceanography, Dona Paula, Goa-403004 rsharma@nio.org Introduction “Photography as a means of observing...-sea photographs were those made by Maurice Ewing and his co-workers during cruises on Atlantis in 1940-48. Their subject was the seafloor and their method of clicking was to trigger the camera mechanically when its mounting struck bottom. This is the only...

  11. A Novel Method for Pain Relief in Chronic Pancreatitis: an Old Drug in a New Pack: a Controlled Study.

    Science.gov (United States)

    Pujahari, Aswini Kumar

    2017-12-01

    Most of pain-relieving agents in chronic pancreatitis are nonspecific and unpredictable. Omeprazole induces hypergastrinemia due to reduced gastric acidity. Raised serum gastrin, in turn, modulates to reduce secretin level. Secretin is responsible for secretion of almost 80 % bicarbonate-rich pancreatic juice from the ductular epithelium without affecting enzyme output. It is a prospective randomized study in patients with CT-confirmed chronic pancreatitis. The control group got the standard care and 60 mg of omeprazole twice daily was added to the test group. Absence of pain relief at 14 days was considered as failure. Pain relief, weight gain and any toxic effect of omeprazole were reviewed at 12 months. One hundred thirty-seven cases were included, with an age range of 19 to 72 years. (mean 42.67). The majority of them were alcoholic males. At 2 weeks, pain relief was noted in 47/69(68.1 %) and 63/65(96.96 %) in the control and omeprazole group, respectively. At the end of 1 year, the omeprazole group had greater weight gain (95 %) than the control group (69.5 %). All the pseudocysts in the omeprazole group and most in the control group resolved. No side effect of omeprazole was seen. The high-dose omeprazole (HDO) group of patients had significantly better pain relief in chronic pancreatitis than those treated with conventional therapy. A high number of cases gained weight in the HDO group than the controlled group. No patient had clinical, endoscopic, biochemical, or haematological toxicity of HDO. More studies are necessary.

  12. Evaluation of the U.S. Geological Survey standard elevation products in a two-dimensional hydraulic modeling application for a low relief coastal floodplain

    Science.gov (United States)

    Witt, Emitt C.

    2015-01-01

    Growing use of two-dimensional (2-D) hydraulic models has created a need for high resolution data to support flood volume estimates, floodplain specific engineering data, and accurate flood inundation scenarios. Elevation data are a critical input to these models that guide the flood-wave across the landscape allowing the computation of valuable engineering specific data that provides a better understanding of flooding impacts on structures, debris movement, bed scour, and direction. High resolution elevation data are becoming publicly available that can benefit the 2-D flood modeling community. Comparison of these newly available data with legacy data suggests that better modeling outcomes are achieved by using 3D Elevation Program (3DEP) lidar point data and the derived 1 m Digital Elevation Model (DEM) product relative to the legacy 3 m, 10 m, or 30 m products currently available in the U.S. Geological Survey (USGS) National Elevation Dataset. Within the low topographic relief of a coastal floodplain, the newer 3DEP data better resolved elevations within the forested and swampy areas achieving simulations that compared well with a historic flooding event. Results show that the 1 m DEM derived from 3DEP lidar source provides a more conservative estimate of specific energy, static pressure, and impact pressure for grid elements at maximum flow relative to the legacy DEM data. Better flood simulations are critically important in coastal floodplains where climate change driven storm frequency and sea level rise will contribute to more frequent flooding events.

  13. A self-administered method of acute pressure block of sciatic nerves for short-term relief of dental pain: a randomized study.

    Science.gov (United States)

    Wang, Xiaolin; Zhao, Wanghong; Wang, Ye; Hu, Jiao; Chen, Qiu; Yu, Juncai; Wu, Bin; Huang, Rong; Gao, Jie; He, Jiman

    2014-08-01

    While stimulation of the peripheral nerves increases the pain threshold, chronic pressure stimulation of the sciatic nerve is associated with sciatica. We recently found that acute pressure block of the sciatic nerve inhibits pain. Therefore, we propose that, the pain pathology-causing pressure is chronic, not acute. Here, we report a novel self-administered method: acute pressure block of the sciatic nerves is applied by the patients themselves for short-term relief of pain from dental diseases. This was a randomized, single-blind study. Hospital patients. Patients aged 16-60 years with acute pulpitis, acute apical periodontitis, or pericoronitis of the third molar of the mandible experiencing pain ≥3 on the 11-point numerical pain rating scale. Three-minute pressure to sciatic nerves was applied by using the hands (hand pressure method) or by having the patients squat to force the thigh and shin as tightly as possible on the sandwiched sciatic nerve bundles (self-administered method). The primary efficacy variable was the mean difference in pain scores from the baseline. One hundred seventy-two dental patients were randomized. The self-administered method produced significant relief from pain associated with dental diseases (P ≤ 0.001). The analgesic effect of the self-administered method was similar to that of the hand pressure method. The self-administered method is easy to learn and can be applied at any time for pain relief. We believe that patients will benefit from this method. © 2014 The Authors. Pain Medicine published by Wiley Periodicals, Inc. on behalf of American Academy of Pain Medicine.

  14. Prospectively surveying health-related quality of life and symptom relief in a lot-based sample of medical cannabis-using patients in urban Washington State reveals managed chronic illness and debility.

    Science.gov (United States)

    Aggarwal, S K; Carter, G T; Sullivan, M D; Zumbrunnen, C; Morrill, R; Mayer, J D

    2013-09-01

    To characterize health-related quality of life (HRQoL) in medical cannabis patients. Short Form 36 (SF-36) Physical Health Component Score and Mental Health Component Score (MCS) surveys as well has CDC (Centers for Disease Control) HRQoL-14 surveys were completed by 37 qualified patients. Mean SF-36 PCS and MCS, normalized at 50, were 37.4 and 44.2, respectively. Eighty percent of participants reported activity/functional limitations secondary to impairments or health problems. Patients reported using medical cannabis to treat a wide array of symptoms across multiple body systems with relief ratings consistently in the 7-10/10 range. The HRQoL results in this sample of medical cannabis-using patients are comparable with published norms in other chronically ill populations. Data presented provide insight into medical cannabis-using patients' self-rated health, HRQoL, disease incidences, and cannabis-related symptom relief.

  15. On the Adequacy of API 521 Relief-Valve Sizing Method for Gas-Filled Pressure Vessels Exposed to Fire

    Directory of Open Access Journals (Sweden)

    Anders Andreasen

    2018-03-01

    Full Text Available In this paper, the adequacy of the legacy API 521 guidance on pressure relief valve (PRV sizing for gas-filled vessels subjected to external fire is investigated. Multiple studies show that in many cases, the installation of a PRV offers little or no protection—therefore provides an unfounded sense of security. Often the vessel wall will be weakened by high temperatures, before the PRV relieving pressure is reached. In this article, a multiparameter study has been performed taking into consideration various vessel sizes, design pressures (implicitly vessel wall thickness, vessel operating pressure, fire type (pool fire or jet fire by applying the methodology presented in the Scandpower guideline. A transient thermomechanical response analysis has been carried out to accurately determine vessel rupture times. It is demonstrated that only vessels with relatively thick walls, as a result of high design pressures, benefit from the presence of a PRV, while for most cases no appreciable increase in the vessel survival time beyond the onset of relief is observed. For most of the cases studied, vessel rupture will occur before the relieving pressure of the PRV is reached.

  16. Fraktalnist deformational relief polycrystalline aluminum

    Directory of Open Access Journals (Sweden)

    М.В. Карускевич

    2006-02-01

    Full Text Available  The possibility of the fractal geometry method application for the analisys of surface deformation structures under cyclic loading is presented.It is shown, that deformation relief of the alclad aluminium alloyes meets the criteria of the fractality. For the fractal demention estimation the method of  “box-counting”can be applied.

  17. Digital Shaded-Relief Image of Alaska

    Science.gov (United States)

    Riehle, J.R.; Fleming, Michael D.; Molnia, B.F.; Dover, J.H.; Kelley, J.S.; Miller, M.L.; Nokleberg, W.J.; Plafker, George; Till, A.B.

    1997-01-01

    Introduction One of the most spectacular physiographic images of the conterminous United States, and the first to have been produced digitally, is that by Thelin and Pike (USGS I-2206, 1991). The image is remarkable for its crispness of detail and for the natural appearance of the artificial land surface. Our goal has been to produce a shaded-relief image of Alaska that has the same look and feel as the Thelin and Pike image. The Alaskan image could have been produced at the same scale as its lower 48 counterpart (1:3,500,000). But by insetting the Aleutian Islands into the Gulf of Alaska, we were able to print the Alaska map at a larger scale (1:2,500,000) and about the same physical size as the Thelin and Pike image. Benefits of the 1:2,500,000 scale are (1) greater resolution of topographic features and (2) ease of reference to the U.S. Geological Survey (USGS) (1987) Alaska Map E and the statewide geologic map (Beikman, 1980), which are both 1:2,500,000 scale. Manually drawn, shaded-relief images of Alaska's land surface have long been available (for example, Department of the Interior, 1909; Raisz, 1948). The topography depicted on these early maps is mainly schematic. Maps showing topographic contours were first available for the entire State in 1953 (USGS, 1:250,000) (J.H. Wittmann, USGS, written commun., 1996). The Alaska Map E was initially released in 1954 in both planimetric (revised in 1973 and 1987) and shaded-relief versions (revised in 1973, 1987, and 1996); topography depicted on the shaded-relief version is based on the 1:250,000-scale USGS topographic maps. Alaska Map E was later modified to include hypsometric tinting by Raven Maps and Images (1989, revised 1993) as copyrighted versions. Other shaded-relief images were produced for The National Geographic Magazine (LaGorce, 1956; 1:3,000,000) or drawn by Harrison (1970; 1:7,500,000) for The National Atlas of the United States. Recently, the State of Alaska digitally produced a shaded-relief image

  18. Methodical recommendations for power unit comprehensive engineering and radiation survey

    International Nuclear Information System (INIS)

    Nosovskij, A.V.

    2000-01-01

    The article describes power unit radiation survey methods developed and applied during conduction of Ch NPP unit I Comprehensive Engineering Radiation Survey. Special requirements for units under decommissioning, main survey principals, criteria for definition of volume and the order of survey for various systems of a NPP Unit are included

  19. An UAV scheduling and planning method for post-disaster survey

    Science.gov (United States)

    Li, G. Q.; Zhou, X. G.; Yin, J.; Xiao, Q. Y.

    2014-11-01

    Annually, the extreme climate and special geological environments lead to frequent natural disasters, e.g., earthquakes, floods, etc. The disasters often bring serious casualties and enormous economic losses. Post-disaster surveying is very important for disaster relief and assessment. As the Unmanned Aerial Vehicle (UAV) remote sensing with the advantage of high efficiency, high precision, high flexibility, and low cost, it is widely used in emergency surveying in recent years. As the UAVs used in emergency surveying cannot stop and wait for the happening of the disaster, when the disaster happens the UAVs usually are working at everywhere. In order to improve the emergency surveying efficiency, it is needed to track the UAVs and assign the emergency surveying task for each selected UAV. Therefore, a UAV tracking and scheduling method for post-disaster survey is presented in this paper. In this method, Global Positioning System (GPS), and GSM network are used to track the UAVs; an emergency tracking UAV information database is built in advance by registration, the database at least includes the following information, e.g., the ID of the UAVs, the communication number of the UAVs; when catastrophe happens, the real time location of all UAVs in the database will be gotten using emergency tracking method at first, then the traffic cost time for all UAVs to the disaster region will be calculated based on the UAVs' the real time location and the road network using the nearest services analysis algorithm; the disaster region is subdivided to several emergency surveying regions based on DEM, area, and the population distribution map; the emergency surveying regions are assigned to the appropriated UAV according to shortest cost time rule. The UAVs tracking and scheduling prototype is implemented using SQLServer2008, ArcEnginge 10.1 SDK, Visual Studio 2010 C#, Android, SMS Modem, and Google Maps API.

  20. Multidisciplinary eHealth Survey Evaluation Methods

    Science.gov (United States)

    Karras, Bryant T.; Tufano, James T.

    2006-01-01

    This paper describes the development process of an evaluation framework for describing and comparing web survey tools. We believe that this approach will help shape the design, development, deployment, and evaluation of population-based health interventions. A conceptual framework for describing and evaluating web survey systems will enable the…

  1. Comparison of Survey Data Collection Methods

    Directory of Open Access Journals (Sweden)

    VIDAL DÍAZ DE RADA

    2017-01-01

    Full Text Available This paper presents the results of a mixed-mode survey of the general population using a combination of postal, telephone, and Internet survey protocols. Potential respondents were invited to participate by ordinary mail and were allowed to choose their preferred response mode. The paper focuses on response quality (taking non-responses into consideration, fieldwork time and data collection cost. The results reveal that the Internet survey produces the lowest rate of non-responses and requires significantly less fieldwork time, although it is slightly more costly than the postal survey. However, when differences in cost structure are taken into account, we find that the same number of completed questionnaires could have been obtained through the Internet alone at a cost that is 18.2% lower than the mixed-mode survey.

  2. Impact of Tax Relief on Public Finance

    Directory of Open Access Journals (Sweden)

    Bikas Egidijus

    2016-12-01

    Full Text Available Tax reliefs are optional, but a very important element of the taxation system. This element is used for different purposes by a country’s government institutions. Tax reliefs are a form of tax expenditure that helps to reduce budget revenues. Tax reliefs influence individual and corporate financial behaviour and can have positive or negative effects on the economic and social factors. In the last few years, expansion of tax relief has attracted worldwide attention because of the fact that, after the global financial crisis, many countries are still suffering from fiscal deficits, and expansion of tax relief has not contributed to solving this problem. Tax reliefs are presupposed to be a fiscal policy tool of significance in various subsystems of public finances. The main aim of this article is to examine the impact of personal income tax reliefs on Lithuanian public finances. To achieve this aim, statistical information was systemized; Monte Carlo method was used to group data by horizontal rows and logical links analysed, which helped to evaluate the influence of tax reliefs on public finances. In the simulations, the Monte Carlo method helped to simulate random samples, which were then examined by adapting the conclusions of the theory of probability and mathematical statistics methods.

  3. Comparison of Satellite Surveying to Traditional Surveying Methods for the Resources Industry

    Science.gov (United States)

    Osborne, B. P.; Osborne, V. J.; Kruger, M. L.

    Modern ground-based survey methods involve detailed survey, which provides three-space co-ordinates for surveyed points, to a high level of accuracy. The instruments are operated by surveyors, who process the raw results to create survey location maps for the subject of the survey. Such surveys are conducted for a location or region and referenced to the earth global co- ordinate system with global positioning system (GPS) positioning. Due to this referencing the survey is only as accurate as the GPS reference system. Satellite survey remote sensing utilise satellite imagery which have been processed using commercial geographic information system software. Three-space co-ordinate maps are generated, with an accuracy determined by the datum position accuracy and optical resolution of the satellite platform.This paper presents a case study, which compares topographic surveying undertaken by traditional survey methods with satellite surveying, for the same location. The purpose of this study is to assess the viability of satellite remote sensing for surveying in the resources industry. The case study involves a topographic survey of a dune field for a prospective mining project area in Pakistan. This site has been surveyed using modern surveying techniques and the results are compared to a satellite survey performed on the same area.Analysis of the results from traditional survey and from the satellite survey involved a comparison of the derived spatial co- ordinates from each method. In addition, comparisons have been made of costs and turnaround time for both methods.The results of this application of remote sensing is of particular interest for survey in areas with remote and extreme environments, weather extremes, political unrest, poor travel links, which are commonly associated with mining projects. Such areas frequently suffer language barriers, poor onsite technical support and resources.

  4. Optimum survey methods when interviewing employed women.

    Science.gov (United States)

    Dunning, Kari; LeMasters, Grace K

    2009-02-01

    While survey studies have examined bias much is unknown regarding specific subpopulations, especially women workers. A population based phone, Internet, and mail survey of workplace falls during pregnancy was undertaken. Participation by industry and occupation and survey approach and bias, reliability, and incomplete data were examined. Of the 3,997 women surveyed, 71% were employed during their pregnancy. Internet responders were most likely to be employed while pregnant and to report a workplace fall at 8.8% compared to 5.8% and 6.1% for mail and phone respondents. Internet responders had the most missing employment data with company name missing for 17.9% compared to 1.3% for phone responders. Mail surveys were best for recruiting those employed in eight of nine industries, and this was especially true for service occupations. To decrease bias and increase participation, mixed approaches may be useful with particular attention for collecting occupational data. Am. J. Ind. Med. 52:105-112, 2009. (c) 2008 Wiley-Liss, Inc.

  5. Survey of Nuclear Methods in Chemical Technology

    International Nuclear Information System (INIS)

    Broda, E.

    1966-01-01

    An attempt is made to classify nuclear methods on a logical basis to facilitate assimilation by the technologist. The three main groups are: (I) Tracer methods, (II) Methods based on the influence of absorbers on radiations to be measured, and (III) Radiation chemical methods. The variants of the first two groups are discussed in some detail, and typical examples are given. Group I can be subdivided into (1) Indicator methods, (2) Emanation methods, (3) Radioreagent methods, and (4) Isotope dilution methods, Group II into (5) Activation methods, (6) Absorption methods, (7) Induced Nuclear Reaction methods, (8) Scattering methods, and (9) Fluorescence methods. While the economic benefits due to nuclear methods already run into hundreds of millions of dollars annually, owing to radiation protection problems radiochemical methods in the strict sense are not widely used in actual production. It is suggested that more use should be made of pilot plant tracer studies of chemical processes as used in industry. (author)

  6. Standard Practice for Installation, Inspection, and Maintenance of Valve-body Pressure-relief Methods for Geothermal and Other High-Temperature Liquid Applications

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2003-01-01

    1.1 This practice covers installation, inspection, and maintenance of valve body cavity pressure relief methods for valves used in geothermal and other high-temperature liquid service. The valve type covered by this practice is a design with an isolated body cavity such that when the valve is in either the open or closed position pressure is trapped in the isolated cavity, and there is no provision to relieve the excess pressure internally. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

  7. Survey Shows Variation in Ph.D. Methods Training.

    Science.gov (United States)

    Steeves, Leslie; And Others

    1983-01-01

    Reports on a 1982 survey of journalism graduate studies indicating considerable variation in research methods requirements and emphases in 23 universities offering doctoral degrees in mass communication. (HOD)

  8. Rethinking Traditional Methods of Survey Validation

    Science.gov (United States)

    Maul, Andrew

    2017-01-01

    It is commonly believed that self-report, survey-based instruments can be used to measure a wide range of psychological attributes, such as self-control, growth mindsets, and grit. Increasingly, such instruments are being used not only for basic research but also for supporting decisions regarding educational policy and accountability. The…

  9. Comparing two remote video survey methods for spatial predictions of the distribution and environmental niche suitability of demersal fishes.

    Science.gov (United States)

    Galaiduk, Ronen; Radford, Ben T; Wilson, Shaun K; Harvey, Euan S

    2017-12-15

    Information on habitat associations from survey data, combined with spatial modelling, allow the development of more refined species distribution modelling which may identify areas of high conservation/fisheries value and consequentially improve conservation efforts. Generalised additive models were used to model the probability of occurrence of six focal species after surveys that utilised two remote underwater video sampling methods (i.e. baited and towed video). Models developed for the towed video method had consistently better predictive performance for all but one study species although only three models had a good to fair fit, and the rest were poor fits, highlighting the challenges associated with modelling habitat associations of marine species in highly homogenous, low relief environments. Models based on baited video dataset regularly included large-scale measures of structural complexity, suggesting fish attraction to a single focus point by bait. Conversely, models based on the towed video data often incorporated small-scale measures of habitat complexity and were more likely to reflect true species-habitat relationships. The cost associated with use of the towed video systems for surveying low-relief seascapes was also relatively low providing additional support for considering this method for marine spatial ecological modelling.

  10. Survey of numerical methods for compressible fluids

    Energy Technology Data Exchange (ETDEWEB)

    Sod, G A

    1977-06-01

    The finite difference methods of Godunov, Hyman, Lax-Wendroff (two-step), MacCormack, Rusanov, the upwind scheme, the hybrid scheme of Harten and Zwas, the antidiffusion method of Boris and Book, and the artificial compression method of Harten are compared with the random choice known as Glimm's method. The methods are used to integrate the one-dimensional equations of gas dynamics for an inviscid fluid. The results are compared and demonstrate that Glimm's method has several advantages. 16 figs., 4 tables.

  11. The Use of Analgesic and Other Pain-Relief Drugs to Manage Chronic Low Back Pain: Results from a National Survey.

    Science.gov (United States)

    Gouveia, Nélia; Rodrigues, Ana; Ramiro, Sofia; Eusébio, Mónica; Machado, Pedro M; Canhão, Helena; Branco, Jaime C

    2017-03-01

    To analyze and characterize the intake profile of pain-relief drugs in a population-based study of adults with chronic low back pain (CLBP). EpiReumaPt was a cross-sectional Portuguese population-based study (10,661 subjects). Self-reported active CLBP was considered to be low back pain on the day of enrollment and for ≥ 90 days. Prevalence and profile of analgesic intake was characterized among those self-reporting active CLBP, taking into account the intensity of pain and the World Health Organization (WHO) analgesic ladder. We further investigated whether the presence of active CLBP was a factor independently associated with the intake of analgesics (adjusted for potential confounders). Among 1,487 subjects with active CLBP, only 18.7% were using analgesic/pain-relief drugs. Estimated prevalence was anxiolytics, 14.1%; nonsteroidal anti-inflammatory drugs (NSAIDs), 12.3%; antidepressants, 10.1%; analgesic, antipyretics, 6.6%; anticonvulsants, 3.4%; central muscle relaxants, 2.6%; and analgesic opioids, 1.6%. Most subjects with severe pain were in the first step of the WHO analgesic ladder: NSAIDs plus anxiolytics (4.6%), NSAIDs plus antidepressants (3.2%), or NSAIDs plus muscle relaxants (2.5%). The presence of active CLBP was significantly associated with the intake of all therapeutic groups: antidepressants (odds ratio [OR] = 12.56; P pain-relief drug intake in patients with active CLBP was very low, even for those with severe pain. The WHO analgesic ladder was carefully followed, with an extremely conservative use of analgesic opioids even for those with severe pain. © 2016 World Institute of Pain.

  12. Research Methods in Healthcare Epidemiology: Survey and Qualitative Research.

    Science.gov (United States)

    Safdar, Nasia; Abbo, Lilian M; Knobloch, Mary Jo; Seo, Susan K

    2016-11-01

    Surveys are one of the most frequently employed study designs in healthcare epidemiology research. Generally easier to undertake and less costly than many other study designs, surveys can be invaluable to gain insights into opinions and practices in large samples and may be descriptive and/or be used to test associations. In this context, qualitative research methods may complement this study design either at the survey development phase and/or at the interpretation/extension of results stage. This methods article focuses on key considerations for designing and deploying surveys in healthcare epidemiology and antibiotic stewardship, including identification of whether or not de novo survey development is necessary, ways to optimally lay out and display a survey, denominator measurement, discussion of biases to keep in mind particularly in research using surveys, and the role of qualitative research methods to complement surveys. We review examples of surveys in healthcare epidemiology and antimicrobial stewardship and review the pros and cons of methods used. A checklist is provided to help aid design and deployment of surveys in healthcare epidemiology and antimicrobial stewardship. Infect Control Hosp Epidemiol 2016;1-6.

  13. Underwater sediment-contact radiation survey method

    International Nuclear Information System (INIS)

    Lee, D.R.; St. Aubin, M.; Welch, S.J.

    1991-01-01

    The authors are striving to produce a practical system for mapping lateral distributions in gamma activity on submerged sediments. This is in response to the need for quality control and interpretation of data obtainable by sediment sampling and analyses near nuclear utilities. A prototype gamma probe has been constructed and tested. The prototype is essentially a background survey meter packaged in a 53-cm-long x 5.4-cm-diam waterproof vehicle. This usage-shaped vehicle is connected to a cable for towing in contact with bottom sediments of lakes, rivers, and coastal waters. This vehicle, or sediment probe as it is called, was initially developed for measuring sediment electrical conductances, a parameter that can be used to locate underwater areas of groundwater and contaminant upwelling. During towing, the probe does not roll or twist around its longitudinal axis by more than 10 deg, so that sensors, which have been fixed within the vehicle, can be oriented to look up, down, or sideways. In over 450 lin-km of underwater survey, only a single sediment probe has been irretrievably snagged on sunken rocks or other debris. Work in the Ottawa River near the Chalk River Laboratories has shown good agreement among point measurements of river sediment with continuous measurements using the moving probe

  14. Time-history simulation of civil architecture earthquake disaster relief- based on the three-dimensional dynamic finite element method

    Directory of Open Access Journals (Sweden)

    Liu Bing

    2014-10-01

    Full Text Available Earthquake action is the main external factor which influences long-term safe operation of civil construction, especially of the high-rise building. Applying time-history method to simulate earthquake response process of civil construction foundation surrounding rock is an effective method for the anti-knock study of civil buildings. Therefore, this paper develops a civil building earthquake disaster three-dimensional dynamic finite element numerical simulation system. The system adopts the explicit central difference method. Strengthening characteristics of materials under high strain rate and damage characteristics of surrounding rock under the action of cyclic loading are considered. Then, dynamic constitutive model of rock mass suitable for civil building aseismic analysis is put forward. At the same time, through the earthquake disaster of time-history simulation of Shenzhen Children’s Palace, reliability and practicability of system program is verified in the analysis of practical engineering problems.

  15. METHODS IN THE POST-METHODS ERA. REPORT ON AN INTERNATIONAL SURVEY ON LANGUAGE TEACHING METHODS'

    Directory of Open Access Journals (Sweden)

    Jun Liu

    2004-06-01

    Full Text Available Do methods still have a place in 21" century language teaching? To answer this question, an international survey was conducted in the surnmer of 1999. A sample of 800 language teachers world-wide randomly drawn from 17,800 TESOLers were each given a 2-page survey. The return rate was 58.5% with the actual usable data set of448, which was analyzed by using both descriptive and inferential statistics. Among the ten commonly recognized teaching methods surveyed, both the Communicative Language Teaching Approach and an eclectic method seem to have the highest rate in familiarity, preference, and use. But when multiple factors, such as teaching contexts, instructional settings, learners' proficiency levels, class size, teaching experience and educational backgrounds of the teachers, and the status of being a native or nonnative English speaking professional were taken into consideration, various patterns and themes emerged. One interesting finding is that Grammar Translation is still used in EFL contexts, in larger classes, and with learners at low proficiency levels, though the ratio between the actual use of this method and teachers' preference does not match. Based on the results of the survey, a new theoretical framework is proposed to conceptualize language teaching methods in the post-methods era.

  16. [Changing methods of pain- and fear-relief in dental treatments based on reports published in 'Fogorvosi Szemle'].

    Science.gov (United States)

    Tarján, Ildikó; Gábris, Katalin

    2008-12-01

    In the dental practice--for more than a 100 years--it has been a vital topic how to prevent, eliminate, or at least relieve pain and fear associated with dental treatments. 'Fogorvosi Szemle,' the scientific journal of the Hungarian Dental Association is now a 100 years old. Authors present how the approaches and methods of relieving pain and fear have changed in the past century, based on the reports published in this journal. The reports are grouped in three main topics: local anaesthetics and sedatives; ambulatory narcosis and sedative analgesia; hypnosis and hypnotherapy. Based on the publications of the last one hundred years, it can be concluded that the Hungarian dental practice has followed the trends and principles of the well-known international dental schools.

  17. A survey of quantum Lyapunov control methods.

    Science.gov (United States)

    Cong, Shuang; Meng, Fangfang

    2013-01-01

    The condition of a quantum Lyapunov-based control which can be well used in a closed quantum system is that the method can make the system convergent but not just stable. In the convergence study of the quantum Lyapunov control, two situations are classified: nondegenerate cases and degenerate cases. For these two situations, respectively, in this paper the target state is divided into four categories: the eigenstate, the mixed state which commutes with the internal Hamiltonian, the superposition state, and the mixed state which does not commute with the internal Hamiltonian. For these four categories, the quantum Lyapunov control methods for the closed quantum systems are summarized and analyzed. Particularly, the convergence of the control system to the different target states is reviewed, and how to make the convergence conditions be satisfied is summarized and analyzed.

  18. Does the underground sidewall station survey method meet MHSA ...

    African Journals Online (AJOL)

    The question is asked whether or not this method of sur-veying will meet the MHSA standards of accuracy that was developed for typical hangingwall traverse type networks. Results obtained from a survey closure using a network of clusters of four sidewall stations demonstrates that under the described circumstances it will ...

  19. Assessing risk of draft survey by AHP method

    Science.gov (United States)

    Xu, Guangcheng; Zhao, Kuimin; Zuo, Zhaoying; Liu, Gang; Jian, Binguo; Lin, Yan; Fan, Yukun; Wang, Fei

    2018-04-01

    The paper assesses the risks of vessel floating in the seawater for draft survey by using the analytic hierarchy process. On this basis, the paper established draft survey risk index from the view of draft reading, ballast water, fresh water, and calculation process and so on. Then the paper proposes the method to deal with risk assessment using one concrete sample.

  20. Does the Underground Sidewall Station Survey Method Meet MHSA ...

    African Journals Online (AJOL)

    Grobler, Hendrik

    The underground survey network in a deep level platinum mine in ... The time duration for peg installation during the initial phase of learning the method was ..... changes to the survey “hardware” including prisms, stems and attachment points ...

  1. A survey of real face modeling methods

    Science.gov (United States)

    Liu, Xiaoyue; Dai, Yugang; He, Xiangzhen; Wan, Fucheng

    2017-09-01

    The face model has always been a research challenge in computer graphics, which involves the coordination of multiple organs in faces. This article explained two kinds of face modeling method which is based on the data driven and based on parameter control, analyzed its content and background, summarized their advantages and disadvantages, and concluded muscle model which is based on the anatomy of the principle has higher veracity and easy to drive.

  2. Survey of Methods to Assess Workload

    Science.gov (United States)

    1979-08-01

    thesis study which had to do with the effect of binaural beats upon performan:.e (2) found out there was a subjectively experienced quality of beats ...were forced to conclude that the neuralmechanism by which binaural beats influenced performance is not open to correct subjective evaluation. In terms of...methods for developing indicies of pilot workload, FAA Report (FAA-AN-77- 15), July 1977. 2. ,’ R. E. The effect of binaural beats on performance, J

  3. Service Learning Through Disaster Relief

    Directory of Open Access Journals (Sweden)

    Donna J. Duerst

    2010-06-01

    Full Text Available The Rock County 4-H Disaster Relief Committee raised $1,550 to aid tsunami victims in Sri Lanka and then turned its attention to Hurricane Katrina relief efforts. Thirty-one 4-H youth participated in a service learning trip to the South with the objectives of helping hurricane victims, learning about new cultures and achieving personal growth during three days of service projects in Louisiana and Mississippi. Their written reflections and other evaluative measures revealed they learned about southern culture, gained a greater appreciation for their lives, gained self confidence and developed a desire to help others more often. The trip was a valuable developmental experience for the youth, and information from the trip could be utilized to create similar experiences based on service learning. This article provides an overview of the trip and describes the evaluation methods used to measure learning and assess personal growth.

  4. Survey of methods for rapid spin reversal

    International Nuclear Information System (INIS)

    McKibben, J.L.

    1980-01-01

    The need for rapid spin reversal technique in polarization experiments is discussed. The ground-state atomic-beam source equipped with two rf transitions for hydrogen can be reversed rapidly, and is now in use on several accelerators. It is the optimum choice provided the accelerator can accept H + ions. At present all rapid reversal experiments using H - ions are done with Lamb-shift sources; however, this is not a unique choice. Three methods for the reversal of the spin of the atomic beam within the Lamb-shift source are discussed in order of development. Coherent intensity and perhaps focus modulation seem to be the biggest problems in both types of sources. Methods for reducing these modulations in the Lamb-shift source are discussed. The same Lamb-shift apparatus is easily modified to provide information on the atomic physics of quenching of the 2S/sub 1/2/ states versus spin orientation, and this is also discussed. 2 figures

  5. Survey method for radiological surveys of 300 FF-1 Operable Unit soil and materials

    International Nuclear Information System (INIS)

    Greif, A.A.

    1997-06-01

    This technical basis document is to be used to survey soils at the 300-FF-1 Operable Unit during remediation of the site. Its purpose is to provide a basis for the survey methods to be employed by the Radiological Control Technician to determine if excavated areas require continued remediation in accordance with the Record of Decision for the operable unit

  6. Paper relief architecture

    NARCIS (Netherlands)

    Latka, J.F.

    2014-01-01

    The article presents two contemporary projects of paper structures relief architecture designed and built by Shigeru Ban Architects and Voluntary Architect Network. Author of the article took part in design and construction process of one of the projects. The project of Yaan Nursery School, which

  7. Relief valve testing study

    International Nuclear Information System (INIS)

    BROMM, R.D.

    2001-01-01

    Reclosing pressure-actuated valves, commonly called relief valves, are designed to relieve system pressure once it reaches the set point of the valve. They generally operate either proportional to the differential between their set pressure and the system pressure (gradual lift) or by rapidly opening fully when the set pressure is reached (pop action). A pop action valve allows the maximum fluid flow through the valve when the set pressure is reached. A gradual lift valve allows fluid flow in proportion to how much the system pressure has exceeded the set pressure of the valve (in the case of pressure relief) or has decreased below the set pressure (vacuum relief). These valves are used to protect systems from over and under pressurization. They are used on boilers, pressure vessels, piping systems and vacuum systems to prevent catastrophic failures of these systems, which can happen if they are under or over pressurized beyond the material tolerances. The construction of these valves ranges from extreme precision of less than a psi tolerance and a very short lifetime to extremely robust construction such as those used on historic railroad steam engines that are designed operate many times a day without changing their set pressure when the engines are operating. Relief valves can be designed to be immune to the effects of back pressure or to be vulnerable to it. Which type of valve to use depends upon the design requirements of the system

  8. A Survey of Formal Methods in Software Development

    DEFF Research Database (Denmark)

    Bjørner, Dines

    2012-01-01

    The use of formal methods and formal techniques in industry is steadily growing. In this survey we shall characterise what we mean by software development and by a formal method; briefly overview a history of formal specification languages - some of which are: VDM (Vienna Development Method, 1974...... need for multi-language formalisation (Petri Nets, MSC, StateChart, Temporal Logics); the sociology of university and industry acceptance of formal methods; the inevitability of the use of formal software development methods; while referring to seminal monographs and textbooks on formal methods....

  9. A Survey of Various Object Oriented Requirement Engineering Methods

    OpenAIRE

    Anandi Mahajan; Dr. Anurag Dixit

    2013-01-01

    In current years many industries have been moving to the use of object-oriented methods for the development of large scale information systems The requirement of Object Oriented approach in the development of software systems is increasing day by day. This paper is basically a survey paper on various Object-oriented requirement engineering methods. This paper contains a summary of the available Object-oriented requirement engineering methods with their relative advantages and disadvantages...

  10. Fertility and Symptom Relief following Robot-Assisted Laparoscopic Myomectomy

    Directory of Open Access Journals (Sweden)

    Michael C. Pitter

    2015-01-01

    Full Text Available Objective. To examine success of robot-assisted laparoscopic myomectomy (RALM measured by sustained symptom relief and fertility. Methods. This is a retrospective survey of 426 women who underwent RALM for fibroids, symptom relief, or infertility at three practice sites across the US. We examined rates of symptom recurrence and pregnancy and factors associated with these outcomes. Results. Overall, 70% of women reported being symptom-free, with 62.9% free of symptoms after three years. At >3 years, 66.7% of women who underwent surgery to treat infertility and 80% who were also symptom-free reported achieving pregnancy. Factors independently associated with symptom recurrence included greater time after surgery, preoperative dyspareunia, multiple fibroid surgeries, smoking after surgery, and preexisting diabetes. Factors positively correlated with achieving pregnancy included desiring pregnancy, prior pregnancy, greater time since surgery, and Caucasian race. Factors negatively correlated with pregnancy were advanced age and symptom recurrence. Conclusions. This paper, the first to examine symptom recurrence after RALM, demonstrates both short- and long-term effectiveness in providing symptom relief. Furthermore, RALM may have the potential to improve the chance of conception, even in a population at high risk of subfertility, with greater benefits among those who remain symptom-free. These findings require prospective validation.

  11. Evaluation of methods to calibrate radiation survey meters

    International Nuclear Information System (INIS)

    Robinson, R.C.; Arbeau, N.D.

    1987-04-01

    Calibration requirements for radiation survey meters used in industrial radiography have been reviewed. Information obtained from a literature search, discussions with CSLD inspectors and firms performing calibrations has been considered. Based on this review a set of minimum calibration requirements was generated which, when met, will determine that the survey meter is suited for measurements described in the current AEC Regulations that apply to industrial radiography equipment. These requirements are presented in this report and may be used as guidelines for evaluating calibration methods proposed or in use in industry. 39 refs

  12. Formal methods for industrial critical systems a survey of applications

    CERN Document Server

    Margaria-Steffen, Tiziana

    2012-01-01

    "Today, formal methods are widely recognized as an essential step in the design process of industrial safety-critical systems. In its more general definition, the term formal methods encompasses all notations having a precise mathematical semantics, together with their associated analysis methods, that allow description and reasoning about the behavior of a system in a formal manner.Growing out of more than a decade of award-winning collaborative work within the European Research Consortium for Informatics and Mathematics, Formal Methods for Industrial Critical Systems: A Survey of Applications presents a number of mainstream formal methods currently used for designing industrial critical systems, with a focus on model checking. The purpose of the book is threefold: to reduce the effort required to learn formal methods, which has been a major drawback for their industrial dissemination; to help designers to adopt the formal methods which are most appropriate for their systems; and to offer a panel of state-of...

  13. Comparing Traditional and Crowdsourcing Methods for Pretesting Survey Questions

    Directory of Open Access Journals (Sweden)

    Jennifer Edgar

    2016-10-01

    Full Text Available Cognitive interviewing is a common method used to evaluate survey questions. This study compares traditional cognitive interviewing methods with crowdsourcing, or “tapping into the collective intelligence of the public to complete a task.” Crowdsourcing may provide researchers with access to a diverse pool of potential participants in a very timely and cost-efficient way. Exploratory work found that crowdsourcing participants, with self-administered data collection, may be a viable alternative, or addition, to traditional pretesting methods. Using three crowdsourcing designs (TryMyUI, Amazon Mechanical Turk, and Facebook, we compared the participant characteristics, costs, and quantity and quality of data with traditional laboratory-based cognitive interviews. Results suggest that crowdsourcing and self-administered protocols may be a viable way to collect survey pretesting information, as participants were able to complete the tasks and provide useful information; however, complex tasks may require the skills of an interviewer to administer unscripted probes.

  14. Biological variables for the site survey of surface ecosystems - existing data and survey methods

    International Nuclear Information System (INIS)

    Kylaekorpi, Lasse; Berggren, Jens; Larsson, Mats; Liberg, Maria; Rydgren, Bernt

    2000-06-01

    In the process of selecting a safe and environmentally acceptable location for the deep level repository of nuclear waste, site surveys will be carried out. These site surveys will also include studies of the biota at the site, in order to assure that the chosen site will not conflict with important ecological interests, and to establish a thorough baseline for future impact assessments and monitoring programmes. As a preparation to the site survey programme, a review of the variables that need to be surveyed is conducted. This report contains the review for some of those variables. For each variable, existing data sources and their characteristics are listed. For those variables for which existing data sources are inadequate, suggestions are made for appropriate methods that will enable the establishment of an acceptable baseline. In this report the following variables are reviewed: Fishery, Landscape, Vegetation types, Key biotopes, Species (flora and fauna), Red-listed species (flora and fauna), Biomass (flora and fauna), Water level, water retention time (incl. water body and flow), Nutrients/toxins, Oxygen concentration, Layering, stratification, Light conditions/transparency, Temperature, Sediment transport, (Marine environments are excluded from this review). For a major part of the variables, the existing data coverage is most likely insufficient. Both the temporal and/or the geographical resolution is often limited, which means that complementary surveys must be performed during (or before) the site surveys. It is, however, in general difficult to make exact judgements on the extent of existing data, and also to give suggestions for relevant methods to use in the site surveys. This can be finally decided only when the locations for the sites are decided upon. The relevance of the different variables also depends on the environmental characteristics of the sites. Therefore, we suggest that when the survey sites are selected, an additional review is

  15. Biological variables for the site survey of surface ecosystems - existing data and survey methods

    Energy Technology Data Exchange (ETDEWEB)

    Kylaekorpi, Lasse; Berggren, Jens; Larsson, Mats; Liberg, Maria; Rydgren, Bernt [SwedPower AB, Stockholm (Sweden)

    2000-06-01

    In the process of selecting a safe and environmentally acceptable location for the deep level repository of nuclear waste, site surveys will be carried out. These site surveys will also include studies of the biota at the site, in order to assure that the chosen site will not conflict with important ecological interests, and to establish a thorough baseline for future impact assessments and monitoring programmes. As a preparation to the site survey programme, a review of the variables that need to be surveyed is conducted. This report contains the review for some of those variables. For each variable, existing data sources and their characteristics are listed. For those variables for which existing data sources are inadequate, suggestions are made for appropriate methods that will enable the establishment of an acceptable baseline. In this report the following variables are reviewed: Fishery, Landscape, Vegetation types, Key biotopes, Species (flora and fauna), Red-listed species (flora and fauna), Biomass (flora and fauna), Water level, water retention time (incl. water body and flow), Nutrients/toxins, Oxygen concentration, Layering, stratification, Light conditions/transparency, Temperature, Sediment transport, (Marine environments are excluded from this review). For a major part of the variables, the existing data coverage is most likely insufficient. Both the temporal and/or the geographical resolution is often limited, which means that complementary surveys must be performed during (or before) the site surveys. It is, however, in general difficult to make exact judgements on the extent of existing data, and also to give suggestions for relevant methods to use in the site surveys. This can be finally decided only when the locations for the sites are decided upon. The relevance of the different variables also depends on the environmental characteristics of the sites. Therefore, we suggest that when the survey sites are selected, an additional review is

  16. Survey Method for Radiological Surveys of 300-FF-1 Operable Unit Soils and Material

    International Nuclear Information System (INIS)

    Brehm, D.M.

    1998-06-01

    This technical basis is to be used to survey soils at the 300-FF-1 Operable Unit during remediation of the site. Its purpose is to provide a basis for the survey methods to be employed by radiological control technician (RCTs) to guide the excavation effort in accordance with the 300-FF-1 waste site Record of Decision (ROD). The ROD for the 300-FF-1 Operable Unit requires selective excavation, removal, and disposal of contaminated soil above 350 pCi/g total uranium activity. Soil above this level will be disposed of as radioactive waste. The remaining soil will remain onsite

  17. Radiological decontamination, survey, and statistical release method for vehicles

    International Nuclear Information System (INIS)

    Goodwill, M.E.; Lively, J.W.; Morris, R.L.

    1996-06-01

    Earth-moving vehicles (e.g., dump trucks, belly dumps) commonly haul radiologically contaminated materials from a site being remediated to a disposal site. Traditionally, each vehicle must be surveyed before being released. The logistical difficulties of implementing the traditional approach on a large scale demand that an alternative be devised. A statistical method for assessing product quality from a continuous process was adapted to the vehicle decontamination process. This method produced a sampling scheme that automatically compensates and accommodates fluctuating batch sizes and changing conditions without the need to modify or rectify the sampling scheme in the field. Vehicles are randomly selected (sampled) upon completion of the decontamination process to be surveyed for residual radioactive surface contamination. The frequency of sampling is based on the expected number of vehicles passing through the decontamination process in a given period and the confidence level desired. This process has been successfully used for 1 year at the former uranium millsite in Monticello, Utah (a cleanup site regulated under the Comprehensive Environmental Response, Compensation, and Liability Act). The method forces improvement in the quality of the decontamination process and results in a lower likelihood that vehicles exceeding the surface contamination standards are offered for survey. Implementation of this statistical sampling method on Monticello projects has resulted in more efficient processing of vehicles through decontamination and radiological release, saved hundreds of hours of processing time, provided a high level of confidence that release limits are met, and improved the radiological cleanliness of vehicles leaving the controlled site

  18. Remembering reliefs that have disappeared

    International Nuclear Information System (INIS)

    Arnaud, N.

    1998-01-01

    Natural radioactivity can give information about age but also about thermal evolution of rocks. The accumulation of decay products in a material can be disturbed by temperature rising. Over a certain temperature called opening temperature the decay products are migrating due to atomic diffusion. The decay reactions used usually are K 40 /Ar 40 , Sm 143 /Nd 144 , C 14 /N 14 and the successive disintegrations of uranium leading to lead. A method known as thermo-chronology studies these isotopic ratios and links them to temperatures. The application of this method to the understanding of the tectonic slab collision between India and Asia is described and some conclusions about the relief are drawn. (A.C.)

  19. Practical methods for radiation survey in nuclear installations

    International Nuclear Information System (INIS)

    Shweikani, R.

    2001-12-01

    This study is placed to those who are responsible to perform radiation survey in the nuclear installations, especially the beginners. Therefore, it gives a comprehensive view to all-important aspects related to their work starting from the structure of atoms to the practical steps for radiation survey works. So, it clarify how to perform personal monitoring, methods for monitoring surface contamination, methods for measuring radioactivity of gases and radioactive aerosols in air, monitoring radiation doses, measuring radiation influences in workplaces and finally measuring internal exposure of radiation workers in nuclear installations. Finally, The study shows some cases of breaches of radiation protection rules in some American nuclear installations and describes the final results of these breaches. The aim of this is to assure that any breach or ignore to radiation protection principles may produce bad results, and there is no leniency in implementing environmental radiation protection principles. (author)

  20. Prenotification, Incentives, and Survey Modality: An Experimental Test of Methods to Increase Survey Response Rates of School Principals

    Science.gov (United States)

    Jacob, Robin Tepper; Jacob, Brian

    2012-01-01

    Teacher and principal surveys are among the most common data collection techniques employed in education research. Yet there is remarkably little research on survey methods in education, or about the most cost-effective way to raise response rates among teachers and principals. In an effort to explore various methods for increasing survey response…

  1. The psychological and physiological stress relief effect of the green roof

    Energy Technology Data Exchange (ETDEWEB)

    Lee, H.; Koshimizu, H. [Meiji Univ., Tokyo (Japan). Dept. of Agriculture

    2007-07-01

    The visual sense influences human psychology and physiology. As such, green gardens in urban environments are touted as being healing gardens that lead to stress relief and improved work efficiency. This paper focused on the visual aspects of such rehabilitation sites. Psychological and physiological experiments were conducted on human response to green roofs in order to quantify the stress relief effect of the green roof scenery. In addition, different green roof designs were tested to determine whether they change the stress relief effect. A 360 degrees panorama photograph of green roofs was shown to 3 male and 3 female students in Meiji University. The experiment was followed by a questionnaire survey based on the semantic differential (SD) method as a psychological evaluation. The SD method is a representative psychological measurement to quantify an image of people for a scene. The changes in heart rate were studied along with blood pressure, and stress degree as a physiological evaluation. The relation between the results of the SD method-based psychological evaluation and the physiological experiment was determined using multiple regression analysis. It was concluded that the stress relief effect can be improved by changing linear scenery to a more curvy one. 15 refs., 4 tabs., 20 figs.

  2. Survey and assessment of conventional software verification and validation methods

    International Nuclear Information System (INIS)

    Miller, L.A.; Groundwater, E.; Mirsky, S.M.

    1993-04-01

    By means of a literature survey, a comprehensive set of methods was identified for the verification and validation of conventional software. The 134 methods so identified were classified according to their appropriateness for various phases of a developmental lifecycle -- requirements, design, and implementation; the last category was subdivided into two, static testing and dynamic testing methods. The methods were then characterized in terms of eight rating factors, four concerning ease-of-use of the methods and four concerning the methods' power to detect defects. Based on these factors, two measurements were developed to permit quantitative comparisons among methods, a Cost-Benefit metric and an Effectiveness Metric. The Effectiveness Metric was further refined to provide three different estimates for each method, depending on three classes of needed stringency of V ampersand V (determined by ratings of a system's complexity and required-integrity). Methods were then rank-ordered for each of the three classes in terms of their overall cost-benefits and effectiveness. The applicability was then assessed of each method for the four identified components of knowledge-based and expert systems, as well as the system as a whole

  3. Bas-Relief Modeling from Normal Images with Intuitive Styles.

    Science.gov (United States)

    Ji, Zhongping; Ma, Weiyin; Sun, Xianfang

    2014-05-01

    Traditional 3D model-based bas-relief modeling methods are often limited to model-dependent and monotonic relief styles. This paper presents a novel method for digital bas-relief modeling with intuitive style control. Given a composite normal image, the problem discussed in this paper involves generating a discontinuity-free depth field with high compression of depth data while preserving or even enhancing fine details. In our framework, several layers of normal images are composed into a single normal image. The original normal image on each layer is usually generated from 3D models or through other techniques as described in this paper. The bas-relief style is controlled by choosing a parameter and setting a targeted height for them. Bas-relief modeling and stylization are achieved simultaneously by solving a sparse linear system. Different from previous work, our method can be used to freely design bas-reliefs in normal image space instead of in object space, which makes it possible to use any popular image editing tools for bas-relief modeling. Experiments with a wide range of 3D models and scenes show that our method can effectively generate digital bas-reliefs.

  4. Music for pain relief.

    Science.gov (United States)

    Cepeda, M S; Carr, D B; Lau, J; Alvarez, H

    2006-04-19

    The efficacy of music for the treatment of pain has not been established. To evaluate the effect of music on acute, chronic or cancer pain intensity, pain relief, and analgesic requirements. We searched The Cochrane Library, MEDLINE, EMBASE, PsycINFO, LILACS and the references in retrieved manuscripts. There was no language restriction. We included randomized controlled trials that evaluated the effect of music on any type of pain in children or adults. We excluded trials that reported results of concurrent non-pharmacological therapies. Data was extracted by two independent review authors. We calculated the mean difference in pain intensity levels, percentage of patients with at least 50% pain relief, and opioid requirements. We converted opioid consumption to morphine equivalents. To explore heterogeneity, studies that evaluated adults, children, acute, chronic, malignant, labor, procedural, or experimental pain were evaluated separately, as well as those studies in which patients chose the type of music. Fifty-one studies involving 1867 subjects exposed to music and 1796 controls met inclusion criteria. In the 31 studies evaluating mean pain intensity there was a considerable variation in the effect of music, indicating statistical heterogeneity ( I(2) = 85.3%). After grouping the studies according to the pain model, this heterogeneity remained, with the exception of the studies that evaluated acute postoperative pain. In this last group, patients exposed to music had pain intensity that was 0.5 units lower on a zero to ten scale than unexposed subjects (95% CI: -0.9 to -0.2). Studies that permitted patients to select the music did not reveal a benefit from music; the decline in pain intensity was 0.2 units, 95% CI (-0.7 to 0.2). Four studies reported the proportion of subjects with at least 50% pain relief; subjects exposed to music had a 70% higher likelihood of having pain relief than unexposed subjects (95% CI: 1.21 to 2.37). NNT = 5 (95% CI: 4 to 13). Three

  5. Survey of evaluation methods for thermal striping in FBR structures

    International Nuclear Information System (INIS)

    Miura, Naoki; Nitta, Akito; Take, Kohji

    1988-01-01

    In the upper core structures or the sodium mixing tee of Fast Breeder Reactors, sodium mixing streams which are at different temperatures produce rapid temperature fluctuations, namely 'thermal striping', upon component surfaces, and it is apprehended that the high-cycle thermal fatigue causes the crack initiation and propagation. The thermal striping is one of the factors which is considered in FBR component design, however, the standard evaluation method has not built up yet because of the intricacy of that mechanism, the difficulty of an actual proof, the lack of data, and so on. In this report, it is intended to survey of the datails and the present situation of the evaluation method of crack initiation and propagation due to thermal striping, and study the appropriate method which will be made use of the rationalization of design. So it is ascertained that the method which use a quantitative prediction of crack propagation is optimum to evaluate the thermal striping phenomenon. (author)

  6. Studying Landslide Displacements in Megamendung (Indonesia Using GPS Survey Method

    Directory of Open Access Journals (Sweden)

    Hasanuddin Z. Abidin

    2004-11-01

    Full Text Available Landslide is one of prominent geohazards that frequently affects Indonesia, especially in the rainy season. It destroys not only environment and property, but usually also causes deaths. Landslide monitoring is therefore very crucial and should be continuously done. One of the methods that can have a contribution in studying landslide phenomena is repeated GPS survey method. This paper presents and discusses the operational performances, constraints and results of GPS surveys conducted in a well known landslide prone area in West Java (Indonesia, namely Megamendung, the hilly region close to Bogor. Three GPS surveys involving 8 GPS points have been conducted, namely on April 2002, May 2003 and May 2004, respectively. The estimated landslide displacements in the area are relatively quite large in the level of a few dm to a few m. Displacements up to about 2-3 m were detected in the April 2002 to May 2003 period, and up to about 3-4 dm in the May 2003 to May 2004 period. In both periods, landslides in general show the northwest direction of displacements. Displacements vary both spatially and temporally. This study also suggested that in order to conclude the existence of real and significant displacements of GPS points, the GPS estimated displacements should be subjected to three types of testing namely: the congruency test on spatial displacements, testing on the agreement between the horizontal distance changes with the predicted direction of landslide displacement, and testing on the consistency of displacement directions on two consecutive periods.

  7. A Survey of Methods for Gas-Lift Optimization

    Directory of Open Access Journals (Sweden)

    Kashif Rashid

    2012-01-01

    Full Text Available This paper presents a survey of methods and techniques developed for the solution of the continuous gas-lift optimization problem over the last two decades. These range from isolated single-well analysis all the way to real-time multivariate optimization schemes encompassing all wells in a field. While some methods are clearly limited due to their neglect of treating the effects of inter-dependent wells with common flow lines, other methods are limited due to the efficacy and quality of the solution obtained when dealing with large-scale networks comprising hundreds of difficult to produce wells. The aim of this paper is to provide an insight into the approaches developed and to highlight the challenges that remain.

  8. Fast and accurate methods of independent component analysis: A survey

    Czech Academy of Sciences Publication Activity Database

    Tichavský, Petr; Koldovský, Zbyněk

    2011-01-01

    Roč. 47, č. 3 (2011), s. 426-438 ISSN 0023-5954 R&D Projects: GA MŠk 1M0572; GA ČR GA102/09/1278 Institutional research plan: CEZ:AV0Z10750506 Keywords : Blind source separation * artifact removal * electroencephalogram * audio signal processing Subject RIV: BB - Applied Statistics, Operational Research Impact factor: 0.454, year: 2011 http://library.utia.cas.cz/separaty/2011/SI/tichavsky-fast and accurate methods of independent component analysis a survey.pdf

  9. Use of deterministic methods in survey calculations for criticality problems

    International Nuclear Information System (INIS)

    Hutton, J.L.; Phenix, J.; Course, A.F.

    1991-01-01

    A code package using deterministic methods for solving the Boltzmann Transport equation is the WIMS suite. This has been very successful for a range of situations. In particular it has been used with great success to analyse trends in reactivity with a range of changes in state. The WIMS suite of codes have a range of methods and are very flexible in the way they can be combined. A wide variety of situations can be modelled ranging through all the current Thermal Reactor variants to storage systems and items of chemical plant. These methods have recently been enhanced by the introduction of the CACTUS method. This is based on a characteristics technique for solving the Transport equation and has the advantage that complex geometrical situations can be treated. In this paper the basis of the method is outlined and examples of its use are illustrated. In parallel with these developments the validation for out of pile situations has been extended to include experiments with relevance to criticality situations. The paper will summarise this evidence and show how these results point to a partial re-adoption of deterministic methods for some areas of criticality. The paper also presents results to illustrate the use of WIMS in criticality situations and in particular show how it can complement codes such as MONK when used for surveying the reactivity effect due to changes in geometry or materials. (Author)

  10. Survey: interpolation methods for whole slide image processing.

    Science.gov (United States)

    Roszkowiak, L; Korzynska, A; Zak, J; Pijanowska, D; Swiderska-Chadaj, Z; Markiewicz, T

    2017-02-01

    Evaluating whole slide images of histological and cytological samples is used in pathology for diagnostics, grading and prognosis . It is often necessary to rescale whole slide images of a very large size. Image resizing is one of the most common applications of interpolation. We collect the advantages and drawbacks of nine interpolation methods, and as a result of our analysis, we try to select one interpolation method as the preferred solution. To compare the performance of interpolation methods, test images were scaled and then rescaled to the original size using the same algorithm. The modified image was compared to the original image in various aspects. The time needed for calculations and results of quantification performance on modified images were also compared. For evaluation purposes, we used four general test images and 12 specialized biological immunohistochemically stained tissue sample images. The purpose of this survey is to determine which method of interpolation is the best to resize whole slide images, so they can be further processed using quantification methods. As a result, the interpolation method has to be selected depending on the task involving whole slide images. © 2016 The Authors Journal of Microscopy © 2016 Royal Microscopical Society.

  11. The IMACS Cluster Building Survey. I. Description of the Survey and Analysis Methods

    Science.gov (United States)

    Oemler Jr., Augustus; Dressler, Alan; Gladders, Michael G.; Rigby, Jane R.; Bai, Lei; Kelson, Daniel; Villanueva, Edward; Fritz, Jacopo; Rieke, George; Poggianti, Bianca M.; hide

    2013-01-01

    The IMACS Cluster Building Survey uses the wide field spectroscopic capabilities of the IMACS spectrograph on the 6.5 m Baade Telescope to survey the large-scale environment surrounding rich intermediate-redshift clusters of galaxies. The goal is to understand the processes which may be transforming star-forming field galaxies into quiescent cluster members as groups and individual galaxies fall into the cluster from the surrounding supercluster. This first paper describes the survey: the data taking and reduction methods. We provide new calibrations of star formation rates (SFRs) derived from optical and infrared spectroscopy and photometry. We demonstrate that there is a tight relation between the observed SFR per unit B luminosity, and the ratio of the extinctions of the stellar continuum and the optical emission lines.With this, we can obtain accurate extinction-corrected colors of galaxies. Using these colors as well as other spectral measures, we determine new criteria for the existence of ongoing and recent starbursts in galaxies.

  12. THE IMACS CLUSTER BUILDING SURVEY. I. DESCRIPTION OF THE SURVEY AND ANALYSIS METHODS

    Energy Technology Data Exchange (ETDEWEB)

    Oemler, Augustus Jr.; Dressler, Alan; Kelson, Daniel; Villanueva, Edward [Observatories of the Carnegie Institution for Science, 813 Santa Barbara St., Pasadena, CA 91101-1292 (United States); Gladders, Michael G. [Department of Astronomy and Astrophysics, University of Chicago, Chicago, IL 60637 (United States); Rigby, Jane R. [Observational Cosmology Lab, NASA Goddard Space Flight Center, Greenbelt, MD 20771 (United States); Bai Lei [Department of Astronomy and Astrophysics, University of Toronto, 50 St. George Street, Toronto, ON M5S 3H4 (Canada); Fritz, Jacopo [Sterrenkundig Observatorium, Universiteit Gent, Krijgslaan 281 S9, B-9000 Gent (Belgium); Rieke, George [Steward Observatory, University of Arizona, Tucson, AZ 8572 (United States); Poggianti, Bianca M.; Vulcani, Benedetta, E-mail: oemler@obs.carnegiescience.edu [INAF-Osservatorio Astronomico di Padova, Vicolo dell' Osservatorio 5, I-35122 Padova (Italy)

    2013-06-10

    The IMACS Cluster Building Survey uses the wide field spectroscopic capabilities of the IMACS spectrograph on the 6.5 m Baade Telescope to survey the large-scale environment surrounding rich intermediate-redshift clusters of galaxies. The goal is to understand the processes which may be transforming star-forming field galaxies into quiescent cluster members as groups and individual galaxies fall into the cluster from the surrounding supercluster. This first paper describes the survey: the data taking and reduction methods. We provide new calibrations of star formation rates (SFRs) derived from optical and infrared spectroscopy and photometry. We demonstrate that there is a tight relation between the observed SFR per unit B luminosity, and the ratio of the extinctions of the stellar continuum and the optical emission lines. With this, we can obtain accurate extinction-corrected colors of galaxies. Using these colors as well as other spectral measures, we determine new criteria for the existence of ongoing and recent starbursts in galaxies.

  13. Metal speciation: survey of environmental methods of analysis

    Energy Technology Data Exchange (ETDEWEB)

    Mach, M.H.; Nott, B.; Scott, J.W.; Maddalone, R.F.; Whiddon, N.T. [TRW, Redondo Beach, CA (United States). Chemistry Technology Dept.

    1996-07-01

    As part of a recent task under the EPRI Analytical Methods Qualification Program (RP 1851), TRW has surveyed the methods available for monitoring metal species in typical utility aqueous discharge streams. Methods for determining the individual species of these metals can become important in a regulatory sense as the EPA transitions to assessment of environmental risk based on bioavailability. For example, EPA considers methyl mercury and Cr(VI) much more toxic to the aquatic environment than inorganic mercury or Cr(III). The species of a given element can also differ in their transport and bioaccumulation. Methods for speciation generally include a selective separation step followed by standard metals analysis. Speciation, therefore, is mainly derived from the separation step and not from the method of final quantisation. Examples of separation/analysis include: selective extraction followed by graphite furnace atomic absorption or ICP-MS; separation by GC followed by metals detection; chelation and/or direct separation by LC followed by UV measurement or metals detection; and ion chromatography with conductivity, UV, or metals detection. There are a number of sampling issues associated with metal species such as stabilization (maintaining oxidation state), absorption, and filtration that need to be addressed in order to obtain and maintain a representative sample for analysis. 45 refs., 1 tab.

  14. Transport survey calculations using the spectral collocation method

    International Nuclear Information System (INIS)

    Painter, S.L.; Lyon, J.F.

    1989-01-01

    A novel transport survey code has been developed and is being used to study the sensitivity of stellarator reactor performance to various transport assumptions. Instead of following one of the usual approaches, the steady-state transport equation are solved in integral form using the spectral collocation method. This approach effectively combine the computational efficiency of global models with the general nature of 1-D solutions. A compact torsatron reactor test case was used to study the convergence properties and flexibility of the new method. The heat transport model combined Shaing's model for ripple-induced neoclassical transport, the Chang-Hinton model for axisymmetric neoclassical transport, and neoalcator scaling for anomalous electron heat flux. Alpha particle heating, radiation losses, classical electron-ion heat flow, and external heating were included. For the test problem, the method exhibited some remarkable convergence properties. As the number of basis functions was increased, the maximum, pointwise error in the integrated power balance decayed exponentially until the numerical noise level as reached. Better than 10% accuracy in the globally-averaged quantities was achieved with only 5 basis functions; better than 1% accuracy was achieved with 10 basis functions. The numerical method was also found to be very general. Extreme temperature gradients at the plasma edge which sometimes arise from the neoclassical models and are difficult to resolve with finite-difference methods were easily resolved. 8 refs., 6 figs

  15. Ultrasonic evaluation of heat treatment for stress relief in steel

    International Nuclear Information System (INIS)

    Bittencourt, Marcelo de S.Q.; Lamy, Carlos A.; Goncalves Filho, Orlando J.A.; Payao Filho, Joao da C.

    2000-01-01

    Residual stresses in materials arise due to the manufacturing processes. As a consequence, in the nuclear area some components must suffer a stress relief treatment according to strict criteria. Although these treatments are carefully carried on, concern with nuclear safety is constantly growing. This work proposes a nondestructive ultrasonic method to guarantee the efficiency of the heat treatment. It was used a short peened steel plate with tensile and compressive stresses which was submitted to a stress relief treatment. The results show that the proposed ultrasonic method could be used to confirm the efficiency of the stress relief heat treatment. (author)

  16. Analytical methods manual for the Mineral Resource Surveys Program, U.S. Geological Survey

    Science.gov (United States)

    Arbogast, Belinda F.

    1996-01-01

    The analytical methods validated by the Mineral Resource Surveys Program, Geologic Division, is the subject of this manual. This edition replaces the methods portion of Open-File Report 90-668 published in 1990. Newer methods may be used which have been approved by the quality assurance (QA) project and are on file with the QA coordinator.This manual is intended primarily for use by laboratory scientists; this manual can also assist laboratory users to evaluate the data they receive. The analytical methods are written in a step by step approach so that they may be used as a training tool and provide detailed documentation of the procedures for quality assurance. A "Catalog of Services" is available for customer (submitter) use with brief listings of:the element(s)/species determined,method of determination,reference to cite,contact person,summary of the technique,and analyte concentration range.For a copy please contact the Branch office at (303) 236-1800 or fax (303) 236-3200.

  17. The JCMT Transient Survey: Data Reduction and Calibration Methods

    Energy Technology Data Exchange (ETDEWEB)

    Mairs, Steve; Lane, James [Department of Physics and Astronomy, University of Victoria, Victoria, BC, V8P 1A1 (Canada); Johnstone, Doug; Kirk, Helen [NRC Herzberg Astronomy and Astrophysics, 5071 West Saanich Road, Victoria, BC, V9E 2E7 (Canada); Lacaille, Kevin; Chapman, Scott [Department of Physics and Atmospheric Science, Dalhousie University, Halifax, NS, B3H 4R2 (Canada); Bower, Geoffrey C. [Academia Sinica Institute of Astronomy and Astrophysics, 645 N. A‘ohōkū Place, Hilo, HI 96720 (United States); Bell, Graham S.; Graves, Sarah, E-mail: smairs@uvic.ca [East Asian Observatory, 660 North A‘ohōkū Place, University Park, Hilo, Hawaii 96720 (United States); Collaboration: JCMT Transient Team

    2017-07-01

    Though there has been a significant amount of work investigating the early stages of low-mass star formation in recent years, the evolution of the mass assembly rate onto the central protostar remains largely unconstrained. Examining in depth the variation in this rate is critical to understanding the physics of star formation. Instabilities in the outer and inner circumstellar disk can lead to episodic outbursts. Observing these brightness variations at infrared or submillimeter wavelengths constrains the current accretion models. The JCMT Transient Survey is a three-year project dedicated to studying the continuum variability of deeply embedded protostars in eight nearby star-forming regions at a one-month cadence. We use the SCUBA-2 instrument to simultaneously observe these regions at wavelengths of 450 and 850 μ m. In this paper, we present the data reduction techniques, image alignment procedures, and relative flux calibration methods for 850 μ m data. We compare the properties and locations of bright, compact emission sources fitted with Gaussians over time. Doing so, we achieve a spatial alignment of better than 1″ between the repeated observations and an uncertainty of 2%–3% in the relative peak brightness of significant, localized emission. This combination of imaging performance is unprecedented in ground-based, single-dish submillimeter observations. Finally, we identify a few sources that show possible and confirmed brightness variations. These sources will be closely monitored and presented in further detail in additional studies throughout the duration of the survey.

  18. The JCMT Transient Survey: Data Reduction and Calibration Methods

    International Nuclear Information System (INIS)

    Mairs, Steve; Lane, James; Johnstone, Doug; Kirk, Helen; Lacaille, Kevin; Chapman, Scott; Bower, Geoffrey C.; Bell, Graham S.; Graves, Sarah

    2017-01-01

    Though there has been a significant amount of work investigating the early stages of low-mass star formation in recent years, the evolution of the mass assembly rate onto the central protostar remains largely unconstrained. Examining in depth the variation in this rate is critical to understanding the physics of star formation. Instabilities in the outer and inner circumstellar disk can lead to episodic outbursts. Observing these brightness variations at infrared or submillimeter wavelengths constrains the current accretion models. The JCMT Transient Survey is a three-year project dedicated to studying the continuum variability of deeply embedded protostars in eight nearby star-forming regions at a one-month cadence. We use the SCUBA-2 instrument to simultaneously observe these regions at wavelengths of 450 and 850 μ m. In this paper, we present the data reduction techniques, image alignment procedures, and relative flux calibration methods for 850 μ m data. We compare the properties and locations of bright, compact emission sources fitted with Gaussians over time. Doing so, we achieve a spatial alignment of better than 1″ between the repeated observations and an uncertainty of 2%–3% in the relative peak brightness of significant, localized emission. This combination of imaging performance is unprecedented in ground-based, single-dish submillimeter observations. Finally, we identify a few sources that show possible and confirmed brightness variations. These sources will be closely monitored and presented in further detail in additional studies throughout the duration of the survey.

  19. Southern Alaska Coastal Relief Model

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Geophysical Data Center (NGDC) is building coastal-relief models (CRM) for select U.S. coastal regions. Bathymetric, topographic, and shoreline data...

  20. Decongestants: OTC Relief for Congestion

    Science.gov (United States)

    ... CorrectlyPain Relievers: Understanding Your OTC OptionsAntacids and Acid Reducers: OTC Relief for Heartburn and Acid RefluxOTC Cough ... Loss and Diet Plans Nutrients and Nutritional Info Sugar and Sugar Substitutes Exercise and Fitness Exercise Basics ...

  1. Allergy Relief for Your Child

    Science.gov (United States)

    ... Products For Consumers Home For Consumers Consumer Updates Allergy Relief for Your Child Share Tweet Linkedin Pin ... at the FDA. Avoid Pollen, Mold and Other Allergy Triggers If your child has seasonal allergies, pay ...

  2. Analysis of preservice inspection relief requests and recommendations for ASME code changes

    International Nuclear Information System (INIS)

    Cook, J.F.

    1985-05-01

    NRC regulations require that preservice inspection (PSI) of nuclear plants be performed in accordance with referenced editions and addenda of Division 1 rules of Section XI, ''Rules for Inservice Inspection of Nuclear Power Plant Components'', of the ASME Boiler and Pressure Vessel Code (ASME Code). The regulations permit applicants to request and obtain relief from the NRC from specific ASME Code requirements that are determined to be impractical. Applicant requests for relief from preservice inspection (PSI) requirements were compiled and analyzed. From this data, covering a total of 178 relief requests, common problems with examination requirements were identified. Changes to examination requirements to solve selected problems are proposed. By following later ASME Code requirements, 46 out of the 178 relief requests can be eliminated. Implementing proposed Code changes would eliminate another 25 relief requests, leaving 107 relief requests out of the original 178 relief requests covered by this survey

  3. Knowledge of and attitude towards pain relief during labour of ...

    African Journals Online (AJOL)

    This study determined women's knowledge of and attitudes to pain relief during labour. Methods ... Department of Family Medicine, Faculty of Health Sciences, University of the Free State, Bloemfontein, South Africa .... Breathing exercises. 25.

  4. Survey and evaluation of aging risk assessment methods and applications

    International Nuclear Information System (INIS)

    Sanzo, D.; Kvam, P.; Apostolakis, G.; Wu, J.; Milici, T.; Ghoniem, N.; Guarro, S.

    1994-11-01

    The US Nuclear Regulatory Commission initiated the nuclear power plant aging research program about 6 years ago to gather information about nuclear power plant aging. Since then, this program has collected a significant amount of information, largely qualitative, on plant aging and its potential effects on plant safety. However, this body of knowledge has not yet been integrated into formalisms that can be used effectively and systematically to assess plant risk resulting from aging, although models for assessing the effect of increasing failure rates on core damage frequency have been proposed. This report surveys the work on the aging of systems, structures, and components (SSCs) of nuclear power plants, as well as associated data bases. We take a critical look at the need to revise probabilistic risk assessments (PRAs) so that they will include the contribution to risk from plant aging, the adequacy of existing methods for evaluating this contribution, and the adequacy of the data that have been used in these evaluation methods. We identify a preliminary framework for integrating the aging of SSCs into the PRA and include the identification of necessary data for such an integration

  5. Pictorial relief for equiluminant images

    Science.gov (United States)

    van Doorn, Andrea J.; de Ridder, Huib; Koenderink, Jan J.

    2005-03-01

    Pictorial relief depends strongly on "cues" in the image. For isoluminant renderings some cues are missing, namely all information that is related to luminance contrast (e.g., shading, atmospheric perspective). It has been suggested that spatial discrimination and especially pictorial space suffer badly in isoluminant conditions. We have investigated the issue through quantitative measurement of pictorial depth-structure under normal and isoluminant conditions. As stimuli we used monochrome halftone photographs, either as such, or "transposed" to Red/Green or Green/Red hue modulations. We used two distinct methods, one to probe pictorial pose (by way of correspondences settings between pictures of an object in different poses), the other to probe pictorial depth (by way of attitude settings of a gauge figure to a perceptual "fit"). In both experiments the depth reconstructions for Red/Green, Green/Red and monochrome conditions were very similar. Moreover, observers performed equally well in Red/Green, Green/Red and monochrome conditions. Thus, the general conclusion is that observers did not do markedly worse with the isoluminant Red/Green and Green/Red transposed images. Whereas the transposed images certainly looked weird, they were easily interpreted. Much of the structure of pictorial space was apparently preserved. Thus the notion that spatial representations are not sustained under isoluminant conditions should be applied with caution.

  6. Measuring fertility through mobile‒phone based household surveys: Methods, data quality, and lessons learned from PMA2020 surveys

    OpenAIRE

    Yoonjoung Choi; Qingfeng Li; Blake Zachary

    2018-01-01

    Background: PMA2020 is a survey platform with resident enumerators using mobile phones. Instead of collecting full birth history, total fertility rates (TFR) have been measured with a limited number of questions on recent births. Employing new approaches provides opportunities to test and advance survey methods. Objective: This study aims to assess the quality of fertility data in PMA2020 surveys, focusing on bias introduced from the questionnaire and completeness and distribution of birth...

  7. Patient expectations predict greater pain relief with joint arthroplasty.

    Science.gov (United States)

    Gandhi, Rajiv; Davey, John Roderick; Mahomed, Nizar

    2009-08-01

    We examined the relationship between patient expectations of total joint arthroplasty and functional outcomes. We surveyed 1799 patients undergoing primary hip or knee arthroplasty for demographic data and Western Ontario McMaster University Osteoarthritis Index scores at baseline, 3 months, and 1 year of follow-up. Patient expectations were determined with 3 survey questions. The patients with the greatest expectations of surgery were younger, male, and had a lower body mass index. Linear regression modeling showed that a greater expectation of pain relief with surgery independently predicted greater reported pain relief at 1 year of follow-up, adjusted for all relevant covariates (P relief after joint arthroplasty is an important predictor of outcomes at 1 year.

  8. A Survey on Banknote Recognition Methods by Various Sensors

    Science.gov (United States)

    Lee, Ji Woo; Hong, Hyung Gil; Kim, Ki Wan; Park, Kang Ryoung

    2017-01-01

    Despite a decrease in the use of currency due to the recent growth in the use of electronic financial transactions, real money transactions remain very important in the global market. While performing transactions with real money, touching and counting notes by hand, is still a common practice in daily life, various types of automated machines, such as ATMs and banknote counters, are essential for large-scale and safe transactions. This paper presents studies that have been conducted in four major areas of research (banknote recognition, counterfeit banknote detection, serial number recognition, and fitness classification) in the accurate banknote recognition field by various sensors in such automated machines, and describes the advantages and drawbacks of the methods presented in those studies. While to a limited extent some surveys have been presented in previous studies in the areas of banknote recognition or counterfeit banknote recognition, this paper is the first of its kind to review all four areas. Techniques used in each of the four areas recognize banknote information (denomination, serial number, authenticity, and physical condition) based on image or sensor data, and are actually applied to banknote processing machines across the world. This study also describes the technological challenges faced by such banknote recognition techniques and presents future directions of research to overcome them. PMID:28208733

  9. A Survey of Formal Methods for Intelligent Swarms

    Science.gov (United States)

    Truszkowski, Walt; Rash, James; Hinchey, Mike; Rouff, Chrustopher A.

    2004-01-01

    cutting edge in system correctness, and requires higher levels of assurance than other (traditional) missions that use a single or small number of spacecraft that are deterministic in nature and have near continuous communication access. One of the highest possible levels of assurance comes from the application of formal methods. Formal methods are mathematics-based tools and techniques for specifying and verifying (software and hardware) systems. They are particularly useful for specifying complex parallel systems, such as exemplified by the ANTS mission, where the entire system is difficult for a single person to fully understand, a problem that is multiplied with multiple developers. Once written, a formal specification can be used to prove properties of a system (e.g., the underlying system will go from one state to another or not into a specific state) and check for particular types of errors (e.g., race or livelock conditions). A formal specification can also be used as input to a model checker for further validation. This report gives the results of a survey of formal methods techniques for verification and validation of space missions that use swarm technology. Multiple formal methods were evaluated to determine their effectiveness in modeling and assuring the behavior of swarms of spacecraft using the ANTS mission as an example system. This report is the first result of the project to determine formal approaches that are promising for formally specifying swarm-based systems. From this survey, the most promising approaches were selected and are discussed relative to their possible application to the ANTS mission. Future work will include the application of an integrated approach, based on the selected approaches identified in this report, to the formal specification of the ANTS mission.

  10. A survey of formal methods for determining functional joint axes.

    Science.gov (United States)

    Ehrig, Rainald M; Taylor, William R; Duda, Georg N; Heller, Markus O

    2007-01-01

    Axes of rotation e.g. at the knee, are often generated from clinical gait analysis data to be used in the assessment of kinematic abnormalities, the diagnosis of disease, or the ongoing monitoring of a patient's condition. They are additionally used in musculoskeletal models to aid in the description of joint and segment kinematics for patient specific analyses. Currently available methods to describe joint axes from segment marker positions share the problem that when one segment is transformed into the coordinate system of another, artefacts associated with motion of the markers relative to the bone can become magnified. In an attempt to address this problem, a symmetrical axis of rotation approach (SARA) is presented here to determine a unique axis of rotation that can consider the movement of two dynamic body segments simultaneously, and then compared its performance in a survey against a number of previously proposed techniques. Using a generated virtual joint, with superimposed marker error conditions to represent skin movement artefacts, fitting methods (geometric axis fit, cylinder axis fit, algebraic axis fit) and transformation techniques (axis transformation technique, mean helical axis, Schwartz approach) were classified and compared with the SARA. Nearly all approaches were able to estimate the axis of rotation to within an RMS error of 0.1cm at large ranges of motion (90 degrees ). Although the geometric axis fit produced the least RMS error of approximately 1.2 cm at lower ranges of motion (5 degrees ) with a stationary axis, the SARA and Axis Transformation Technique outperformed all other approaches under the most demanding marker artefact conditions for all ranges of motion. The cylinder and algebraic axis fit approaches were unable to compute competitive AoR estimates. Whilst these initial results using the SARA are promising and are fast enough to be determined "on-line", the technique must now be proven in a clinical environment.

  11. Enhancing Field Research Methods with Mobile Survey Technology

    Science.gov (United States)

    Glass, Michael R.

    2015-01-01

    This paper assesses the experience of undergraduate students using mobile devices and a commercial application, iSurvey, to conduct a neighborhood survey. Mobile devices offer benefits for enhancing student learning and engagement. This field exercise created the opportunity for classroom discussions on the practicalities of urban research, the…

  12. Understanding Sample Surveys: Selective Learning about Social Science Research Methods

    Science.gov (United States)

    Currin-Percival, Mary; Johnson, Martin

    2010-01-01

    We investigate differences in what students learn about survey methodology in a class on public opinion presented in two critically different ways: with the inclusion or exclusion of an original research project using a random-digit-dial telephone survey. Using a quasi-experimental design and data obtained from pretests and posttests in two public…

  13. The expert's guide to mealtime interventions - A Delphi method survey.

    Science.gov (United States)

    Conchin, Simone; Carey, Sharon

    2017-09-27

    Prevalence of malnutrition and a myriad of barriers to adequate oral diet in hospitalised patients warrants further investment to improve the patient mealtime experience. The aim of this study was to explore barriers and enablers to implementing effective mealtime interventions and develop a process framework to guide clinicians and researchers in the area. Potential experts in the area of hospital mealtime intervention were identified as having published in this field of work within the Australasian setting. Further information was sought by email and telephone communication on professional background; research experience; interest; and capacity to participate. Recruited participants were surveyed using a modified Delphi method to establish opinion and experience in the area of mealtime interventions. Results were collated and content was coded using a thematic analysis approach by the primary researcher and two additional reviewers. Thirty-two Australian authors in the area of mealtime interventions within the hospital environment were identified from publication. Twenty-one participants were able to be contacted and nineteen of these consented to enrol in the study. Participants included those from a dietetic (n = 14), nursing (n = 4) and medical (n = 1) background. Participants were deemed to have expert knowledge if they had significant involvement in the published research and demonstrated a deep level of understanding of hospital mealtime interventions. All participants provided key insights into barriers to oral intake in the hospital environment and suggestions for interventions to address these barriers. From the survey, an eight step framework to guide mealtime interventions was developed. Hospital mealtime interventions are complex processes. Interventions should be implemented after careful consideration of the local context and baseline data; and tailored to address barriers. Roles and responsibilities for nutrition care should be clear and

  14. Corruption in cyclone preparedness and relief efforts in coastal Bangladesh

    DEFF Research Database (Denmark)

    Mahmud, Tanvir; Prowse, Martin

    2012-01-01

    This article seeks to draw possible lessons for adaptation programmes in Bangladesh by examining whether cyclone preparedness and relief interventions are subject to corrupt practices. Based on a random sample survey of 278 households, three focus-group discussions and seven key-informant...

  15. Debt Relief of Natural Persons and the Rate of Satisfaction of Their Creditors in the Czech Republic

    Directory of Open Access Journals (Sweden)

    Marie Pasekova

    2015-06-01

    Full Text Available The purpose of this contribution is to ascertain the rate of creditors’ satisfaction in debt relief. The aim of the paper is to set an approximation functions which guarantee a value of 100% of satisfaction of creditors’ receivables for a zero rate of debt and asymptotically nears a level of 30% with an increasing rate of debt. There are two methods used in this paper. Method of analysis was used to analyse of collected data on the course of debt relief of natural person. The method of the ordinary least squares method was used for setting the approximation functions. On the basis of a survey, it was found that individual creditors are satisfied to 50% of their ascertained receivables.

  16. Surface Relief of Mapping

    Science.gov (United States)

    Costa, Manuel F.; Almeida, Jose B.

    1989-02-01

    We will describe in this communication a noncont act method of measuring surface profile, it does not require any surface preparation, and it can be used with a very large range of surfaces from highly reflecting to non reflecting ones and as complex as textile surfaces. This method is reasonably immune to dispersion and diffraction, which usually make very difficult the application of non contact profilometry methods to a wide range of materials and situations, namely on quality control systems in industrial production lines. The method is based on the horizontal shift of the bright spot on a horizontal surface when this is illuminated with an oblique beam and moved vertically. in order to make the profilometry the sample is swept by an oblique light beam and the bright spot position is compared with a reference position. The bright spot must be as small as possible, particularly in very irregular surfaces; so the light beam diameter must be as small as possible and the incidence angle must not be too small. The sensivity of a system based on this method will be given, mostly, by the reception optical system.

  17. Alternative methods for developing external travel survey data.

    Science.gov (United States)

    2010-10-01

    The Texas Department of Transportation (TxDOT) has a comprehensive on-going travel survey : program that supports the travel demand models being developed for transportation planning efforts in urban : areas throughout Texas. One component of the sur...

  18. Stress relief of transition zones

    International Nuclear Information System (INIS)

    Woodward, J.; van Rooyen, D.

    1984-01-01

    This paper considers the problem of intergranular stress corrosion cracking, initiated on the primary side, in the expansion transition region of roller expanded Alloy 600 tubing. In general it is believed that residual stresses, arising from the expansion process, are the cause of the problem. The work reported here concentrated on the identification of an optimal, in-situ stress relief treatment

  19. Petroleum industry assists hurricane relief

    International Nuclear Information System (INIS)

    Anon.

    1992-01-01

    This paper reports that the petroleum industry is aiding victims of last month's Hurricane Andrew with cash, clothing, food, water, and other supplies. Cash contributions announced as of last week totaled more than $2.7 million for distribution in South Florida and South Louisiana. Petroleum industry employees were collecting relief items such as bottled water and diapers for distribution in those areas

  20. Pictorial relief for equiluminant images

    NARCIS (Netherlands)

    Van Doorn, A.J.; De Ridder, H.; Koenderink, J.J.

    2005-01-01

    Pictorial relief depends strongly on “cues” in the image. For isoluminant renderings some cues are missing, namely all information that is related to luminance contrast (e.g., shading, atmospheric perspective). It has been suggested that spatial discrimination and especially pictorial space suffer

  1. Physician Payment Methods and the Patient-Centered Medical Home: Comment on "A Troubled Asset Relief Program for the Patient-Centered Medical Home".

    Science.gov (United States)

    Quinn, Kevin

    This commentary analyzes the patient-centered medical home (PCMH) model within a framework of the 8 basic payment methods in health care. PCMHs are firmly within the fee-for-service tradition. Changes to the process and structure of the Resource Based Relative Value Scale, which underlies almost all physician fee schedules, could make PCMHs more financially viable. Of the alternative payment methods being considered, shared savings models are unlikely to transform medical practice whereas capitation models place unrealistic expectations on providers to accept epidemiological risk. Episode payment may strike a feasible balance for PCMHs, with newly available episode definitions presenting opportunities not previously available.

  2. Review of Estimation Methods for Landline and Cell Phone Surveys

    Science.gov (United States)

    Arcos, Antonio; del Mar Rueda, María; Trujillo, Manuel; Molina, David

    2015-01-01

    The rapid proliferation of cell phone use and the accompanying decline in landline service in recent years have resulted in substantial potential for coverage bias in landline random-digit-dial telephone surveys, which has led to the implementation of dual-frame designs that incorporate both landline and cell phone samples. Consequently,…

  3. A Socratic Method for Surveying Students' Readiness to Study Evolution

    Science.gov (United States)

    Stansfield, William D.

    2013-01-01

    Before beginning a series of presentations on evolution, it would be prudent to survey the general level of students' understanding of prerequisite basic concepts of reproduction, heredity, ontology, and phenotypic diversity so that teachers can avoid devoting time to well-known subjects of general knowledge and can spend more time on subjects…

  4. Pain relief in labour: tramadol versus pentazocine

    OpenAIRE

    Kavita Chandnani; H. B. Sainee

    2013-01-01

    Background: The present study was undertaken to compare the effect of 100 mg intramuscular tramadol to 30 mg intramuscular Pentazocine for labour analgesia. Methods: A total of 60 cases with 37-40 weeks pregnancy in labour, without any foetal or maternal complications were selected. Out of them Inj. Tramadol was given to 30 cases while rest of the 30 patients received injection Pentazocine. Results: In Tramadol group pain relief was observed in 80% cases, effect started as early as 7-8 min an...

  5. Survey of Machine Learning Methods for Database Security

    Science.gov (United States)

    Kamra, Ashish; Ber, Elisa

    Application of machine learning techniques to database security is an emerging area of research. In this chapter, we present a survey of various approaches that use machine learning/data mining techniques to enhance the traditional security mechanisms of databases. There are two key database security areas in which these techniques have found applications, namely, detection of SQL Injection attacks and anomaly detection for defending against insider threats. Apart from the research prototypes and tools, various third-party commercial products are also available that provide database activity monitoring solutions by profiling database users and applications. We present a survey of such products. We end the chapter with a primer on mechanisms for responding to database anomalies.

  6. Acupucture as pain relief during delivery - a randomized controlled trial

    DEFF Research Database (Denmark)

    Borup, Lissa; Wurlitzer, Winnie; Hedegaard, Morten

    2009-01-01

    Background: Many women need some kind of analgesic treatment to relieve pain during childbirth. The objective of our study was to compare the effect of acupuncture with transcutaneous electric nerve stimulation (TENS) and traditional analgesics for pain relief and relaxation during delivery...... with respect to pain intensity, birth experience, and obstetric outcome. Methods: A randomized controlled trial was conducted with 607 healthy women in labor at term who received acupuncture, TENS, or traditional analgesics. Primary outcomes were the need for pharmacological and invasive methods, level of pain...... to existing pain relief methods. (BIRTH 36:1 March 2009)...

  7. 28 CFR 36.504 - Relief.

    Science.gov (United States)

    2010-07-01

    ... COMMERCIAL FACILITIES Enforcement § 36.504 Relief. (a) Authority of court. In a civil action under § 36.503, the court— (1) May grant any equitable relief that such court considers to be appropriate, including... disabilities; (2) May award other relief as the court considers to be appropriate, including monetary damages...

  8. Effectiveness of Property Tax Relief in Oregon.

    Science.gov (United States)

    Hartman, William T.; Hwang, C. S.

    This study examines the effects of the 1979 Oregon Property Tax Relief Plan on 1980-81 school district budget decisions by comparing the available tax relief, the school expenditures, and the tax levies in the state for the years 1975-81. The history of direct and indirect property tax relief in Oregon is sketched for the years prior to 1979; the…

  9. An Acupuncture Research Protocol Developed from Historical Writings by Mathematical Reflections: A Rational Individualized Acupoint Selection Method for Immediate Pain Relief

    Directory of Open Access Journals (Sweden)

    Sven Schroeder

    2013-01-01

    Full Text Available While balancing yin and yang is one basic principle of Chinese medicine, balancing methods for combination of meridians and acupoints had been described throughout the history of Chinese medicine. We have identified six historical systems for combinations of acupuncture points in historical writings. All of them represent symmetrical combinations which are defined by the steps in the Chinese Clock. Taking the historical systems as a basis, we calculated the possible combinations that fit into these systems they revealed, leading to a total of 19 systems offering new balancing combinations. Merging the data of these 19 systems, there are 7 combinatorial options for every meridian. On the basis of this data, we calculated 4-meridian combinations with an ideal balance pattern, which is given when all meridians balance each other. We identified 5 of these patterns for every meridian, so we end up with 60 patterns for all the 12 meridians but we find multiple overlapping. Finally, 15 distinct patterns remain. By combining this theoretical concept with the Image and Mirror Concept, we developed an acupuncture research protocol. This protocol potentially solves some problems of acupuncture trials because it represents a rational reproducible procedure independent of examiner experience, but the resulting treatment is individualized.

  10. A method to automate the radiological survey process

    International Nuclear Information System (INIS)

    Berven, B.A.; Blair, M.S.

    1987-01-01

    This document describes the USRAD system, a hardware/software ranging and data transmission system, that provides real-time position data and combines it with other portable instrument measurements. Live display of position data and onsite data reduction, presentation, and formatting for reports and automatic transfer into databases are among the unusual attributes of USRADS. Approximately 25% of any survey-to-survey report process is dedicated to data recording and formatting, which is eliminated by USRADS. Cost savings are realized by the elimination of manual transcription of instrument readout in the field and clerical formatting of data in the office. Increased data reliability is realized by ensuring complete survey coverage of an area in the field, by elimination of mathematical errors in conversion of instrument readout to unit concentration, and by elimination of errors associated with transcribing data from the field into report format. The USRAD system can be adapted to measure other types of pollutants or physical/chemical/geological/biological conditions in which portable instrumentation exists. 2 refs., 2 figs

  11. Survey of industry methods for producing highly reliable software

    International Nuclear Information System (INIS)

    Lawrence, J.D.; Persons, W.L.

    1994-11-01

    The Nuclear Reactor Regulation Office of the US Nuclear Regulatory Commission is charged with assessing the safety of new instrument and control designs for nuclear power plants which may use computer-based reactor protection systems. Lawrence Livermore National Laboratory has evaluated the latest techniques in software reliability for measurement, estimation, error detection, and prediction that can be used during the software life cycle as a means of risk assessment for reactor protection systems. One aspect of this task has been a survey of the software industry to collect information to help identify the design factors used to improve the reliability and safety of software. The intent was to discover what practices really work in industry and what design factors are used by industry to achieve highly reliable software. The results of the survey are documented in this report. Three companies participated in the survey: Computer Sciences Corporation, International Business Machines (Federal Systems Company), and TRW. Discussions were also held with NASA Software Engineering Lab/University of Maryland/CSC, and the AIAA Software Reliability Project

  12. Survey on radionuclide producing using cyclotron method in Malaysia

    International Nuclear Information System (INIS)

    Mohd Fadli Mohammad Noh

    2008-01-01

    This research discuss about basic design and systems of medical cyclotron that Malaysia currently have, its applications in radionuclide production and upcoming technologies of cyclotron. Surveys have been carried out on cyclotron facilities at Hospital Putrajaya and Wijaya International Medical Center, WIMC as well as reactor facility at Malaysia Nuclear Agency. The sources in this research also involves on-line and library searches. Information obtained are recorded, categorized, synthesized and discussed. systems of cyclotron of Hospital Putrajaya are further discussed in details. Based from the surveys carried out, it is found out that cyclotron facilities both in Hospital Putrajaya and WIMC only produce ( 18 F)FDG with radioactivity of 18 F produced in 2007 are 16479 mCi and 92546 mCi respectively. Survey also revealed that radioisotope production at Nuclear Malaysia has had its operation been ceased. A new radiopharmaceutical, namely CHOL is suggested to be synthesized by both facilities as a new PET tracer. Latest developments concerning technologies of cyclotron as well as other accelerators such as laser for future medical accelerator, prospect of boron neutron capture and the potential of hadron therapy in Malaysia are discussed here. Radioisotope production in Malaysia is expected to keep booming in future due to increase in usage of PET techniques and the construction of more compact, easy to handle and less costly cyclotrons. (author)

  13. Geochemical drainage surveys for uranium: sampling and analytical methods based on trial surveys in Pennsylvania

    International Nuclear Information System (INIS)

    Rose, A.W.; Keith, M.L.; Suhr, N.H.

    1976-01-01

    Geochemical surveys near sandstone-type uranium prospects in northeastern and north-central Pennsylvania show that the deposits can be detected by carefully planned stream sediment surveys, but not by stream water surveys. Stream waters at single sites changed in U content by x10 to 50 during the 18 months of our studies, and even near known prospects, contain less than 0.2 ppB U most of the time. Uranium extractable from stream sediment by acetic acid--H 2 O 2 provides useful contrast between mineralized and nonmineralized drainages of a square mile or less; total U in sediment does not. High organic material results in increased U content of sediments and must be corrected. Changes in U content of sediment with time reach a maximum of x3 and appear to be of short duration. A sediment of about 200 mi 2 near Jim Thorpe detects anomalies extending over several square miles near known occurrences and a second anomaly about two miles northeast of Penn Haven Jct. A similar survey in Lycoming-Sullivan Counties shows anomalous zones near known prospects of the Beaver Lake area and northwest of Muncy Creek. As, Mn, Pb, and V are enriched in the mineralized zones, and perhaps in surrounding halo zones, but do not appear to be pathfinder elements useful for reconnaissance exploration

  14. Measuring fertility through mobile‒phone based household surveys: Methods, data quality, and lessons learned from PMA2020 surveys

    Directory of Open Access Journals (Sweden)

    Yoonjoung Choi

    2018-05-01

    Full Text Available Background: PMA2020 is a survey platform with resident enumerators using mobile phones. Instead of collecting full birth history, total fertility rates (TFR have been measured with a limited number of questions on recent births. Employing new approaches provides opportunities to test and advance survey methods. Objective: This study aims to assess the quality of fertility data in PMA2020 surveys, focusing on bias introduced from the questionnaire and completeness and distribution of birth month and year, and to estimate TFR adjusted for identified data quality issues. Methods: To assess underestimation from the questionnaire, we simulated births that would be counted using the PMA2020 questionnaires compared to births identified from full birth history. We analyzed the latest Demographic and Health Surveys in ten countries where PMA2020 surveys have been implemented. We assessed the level of reporting completeness for birth month and year and heaping of birth month, analyzing 39 PMA2020 surveys. Finally, TFR were calculated and adjusted for biases introduced from the questionnaire and heaping in birth month. Results: Simple questions introduced minor bias from undercounting multiple births, which was expected and correctable. Meanwhile, incomplete reporting of birth month was relatively high, and the default value of January in data collection software systematically moved births with missing months out of the reference period. On average across the 39 surveys, TFR increased by 1.6Š and 2.4Š, adjusted for undercounted multiple births and heaping on January, respectively. Contribution: This study emphasizes the importance of enumerator training and provides critical insight in software programming in surveys using mobile technologies.

  15. A Survey of Functional Behavior Assessment Methods Used by Behavior Analysts in Practice

    Science.gov (United States)

    Oliver, Anthony C.; Pratt, Leigh A.; Normand, Matthew P.

    2015-01-01

    To gather information about the functional behavior assessment (FBA) methods behavior analysts use in practice, we sent a web-based survey to 12,431 behavior analysts certified by the Behavior Analyst Certification Board. Ultimately, 724 surveys were returned, with the results suggesting that most respondents regularly use FBA methods, especially…

  16. Survey of Technetium Analytical Production Methods Supporting Hanford Nuclear Materials Processing

    International Nuclear Information System (INIS)

    TROYER, G.L.

    1999-01-01

    This document provides a historical survey of analytical methods used for measuring 99 Tc in nuclear fuel reprocessing materials and wastes at Hanford. Method challenges including special sludge matrices tested are discussed. Special problems and recommendations are presented

  17. An historical survey of computational methods in optimal control.

    Science.gov (United States)

    Polak, E.

    1973-01-01

    Review of some of the salient theoretical developments in the specific area of optimal control algorithms. The first algorithms for optimal control were aimed at unconstrained problems and were derived by using first- and second-variation methods of the calculus of variations. These methods have subsequently been recognized as gradient, Newton-Raphson, or Gauss-Newton methods in function space. A much more recent addition to the arsenal of unconstrained optimal control algorithms are several variations of conjugate-gradient methods. At first, constrained optimal control problems could only be solved by exterior penalty function methods. Later algorithms specifically designed for constrained problems have appeared. Among these are methods for solving the unconstrained linear quadratic regulator problem, as well as certain constrained minimum-time and minimum-energy problems. Differential-dynamic programming was developed from dynamic programming considerations. The conditional-gradient method, the gradient-projection method, and a couple of feasible directions methods were obtained as extensions or adaptations of related algorithms for finite-dimensional problems. Finally, the so-called epsilon-methods combine the Ritz method with penalty function techniques.

  18. Multivariable control in nuclear power stations -survey of design methods

    International Nuclear Information System (INIS)

    Mcmorran, P.D.

    1979-12-01

    The development of larger nuclear generating stations increases the importance of dynamic interaction between controllers, because each control action may affect several plant outputs. Multivariable control provides the techniques to design controllers which perform well under these conditions. This report is a foundation for further work on the application of multivariable control in AECL. It covers the requirements of control and the fundamental mathematics used, then reviews the most important linear methods, based on both state-space and frequency-response concepts. State-space methods are derived from analysis of the system differential equations, while frequency-response methods use the input-output transfer function. State-space methods covered include linear-quadratic optimal control, pole shifting, and the theory of state observers and estimators. Frequency-response methods include the inverse Nyquist array method, and classical non-interactive techniques. Transfer-function methods are particularly emphasized since they can incorporate ill-defined design criteria. The underlying concepts, and the application strengths and weaknesses of each design method are presented. A review of significant applications is also given. It is concluded that the inverse Nyquist array method, a frequency-response technique based on inverse transfer-function matrices, is preferred for the design of multivariable controllers for nuclear power plants. This method may be supplemented by information obtained from a modal analysis of the plant model. (auth)

  19. Comparing two survey methods for estimating maternal and perinatal mortality in rural Cambodia.

    Science.gov (United States)

    Chandy, Hoeuy; Heng, Yang Van; Samol, Ha; Husum, Hans

    2008-03-01

    We need solid estimates of maternal mortality rates (MMR) to monitor the impact of maternal care programs. Cambodian health authorities and WHO report the MMR in Cambodia at 450 per 100,000 live births. The figure is drawn from surveys where information is obtained by interviewing respondents about the survival of all their adult sisters (sisterhood method). The estimate is statistically imprecise, 95% confidence intervals ranging from 260 to 620/100,000. The MMR estimate is also uncertain due to under-reporting; where 80-90% of women deliver at home maternal fatalities may go undetected especially where mortality is highest, in remote rural areas. The aim of this study was to attain more reliable MMR estimates by using survey methods other than the sisterhood method prior to an intervention targeting obstetric rural emergencies. The study was carried out in rural Northwestern Cambodia where access to health services is poor and poverty, endemic diseases, and land mines are endemic. Two survey methods were applied in two separate sectors: a community-based survey gathering data from public sources and a household survey gathering data direct from primary sources. There was no statistically significant difference between the two survey results for maternal deaths, both types of survey reported mortality rates around the public figure. The household survey reported a significantly higher perinatal mortality rate as compared to the community-based survey, 8.6% versus 5.0%. Also the household survey gave qualitative data important for a better understanding of the many problems faced by mothers giving birth in the remote villages. There are detection failures in both surveys; the failure rate may be as high as 30-40%. PRINCIPLE CONCLUSION: Both survey methods are inaccurate, therefore inappropriate for evaluation of short-term changes of mortality rates. Surveys based on primary informants yield qualitative information about mothers' hardships important for the design

  20. The swift UVOT stars survey. I. Methods and test clusters

    Energy Technology Data Exchange (ETDEWEB)

    Siegel, Michael H.; Porterfield, Blair L.; Linevsky, Jacquelyn S.; Bond, Howard E.; Hoversten, Erik A.; Berrier, Joshua L.; Gronwall, Caryl A. [Department of Astronomy and Astrophysics, The Pennsylvania State University, 525 Davey Laboratory, University Park, PA 16802 (United States); Holland, Stephen T. [Space Telescope Science Institute, 3700 San Martin Drive, Baltimore, MD 21218 (United States); Breeveld, Alice A. [Mullard Space Science Laboratory, University College London, Holmbury St. Mary, Dorking, Surrey RH5 6NT (United Kingdom); Brown, Peter J., E-mail: siegel@astro.psu.edu, E-mail: blp14@psu.edu, E-mail: heb11@psu.edu, E-mail: caryl@astro.psu.edu, E-mail: sholland@stsci.edu, E-mail: aab@mssl.ucl.ac.uk, E-mail: grbpeter@yahoo.com [George P. and Cynthia Woods Mitchell Institute for Fundamental Physics and Astronomy, Texas A. and M. University, Department of Physics and Astronomy, 4242 TAMU, College Station, TX 77843 (United States)

    2014-12-01

    We describe the motivations and background of a large survey of nearby stellar populations using the Ultraviolet Optical Telescope (UVOT) on board the Swift Gamma-Ray Burst Mission. UVOT, with its wide field, near-UV sensitivity, and 2.″3 spatial resolution, is uniquely suited to studying nearby stellar populations and providing insight into the near-UV properties of hot stars and the contribution of those stars to the integrated light of more distant stellar populations. We review the state of UV stellar photometry, outline the survey, and address problems specific to wide- and crowded-field UVOT photometry. We present color–magnitude diagrams of the nearby open clusters M67, NGC 188, and NGC 2539, and the globular cluster M79. We demonstrate that UVOT can easily discern the young- and intermediate-age main sequences, blue stragglers, and hot white dwarfs, producing results consistent with previous studies. We also find that it characterizes the blue horizontal branch of M79 and easily identifies a known post-asymptotic giant branch star.

  1. The swift UVOT stars survey. I. Methods and test clusters

    International Nuclear Information System (INIS)

    Siegel, Michael H.; Porterfield, Blair L.; Linevsky, Jacquelyn S.; Bond, Howard E.; Hoversten, Erik A.; Berrier, Joshua L.; Gronwall, Caryl A.; Holland, Stephen T.; Breeveld, Alice A.; Brown, Peter J.

    2014-01-01

    We describe the motivations and background of a large survey of nearby stellar populations using the Ultraviolet Optical Telescope (UVOT) on board the Swift Gamma-Ray Burst Mission. UVOT, with its wide field, near-UV sensitivity, and 2.″3 spatial resolution, is uniquely suited to studying nearby stellar populations and providing insight into the near-UV properties of hot stars and the contribution of those stars to the integrated light of more distant stellar populations. We review the state of UV stellar photometry, outline the survey, and address problems specific to wide- and crowded-field UVOT photometry. We present color–magnitude diagrams of the nearby open clusters M67, NGC 188, and NGC 2539, and the globular cluster M79. We demonstrate that UVOT can easily discern the young- and intermediate-age main sequences, blue stragglers, and hot white dwarfs, producing results consistent with previous studies. We also find that it characterizes the blue horizontal branch of M79 and easily identifies a known post-asymptotic giant branch star.

  2. SLD Identification: A Survey of Methods Used by School Psychologists

    Science.gov (United States)

    Watson, Michael D., Jr.; Simon, Joan B.; Nunnley, Lenora

    2016-01-01

    IDEA 2004 opened the door for states, and in some cases districts, to choose among three different methods for identifying children with Specific Learning Disabilities (SLDs). This study provides an in-depth look at SLD identification practices in a state that allows school psychologists to use any of the three methods. Eighty-four school…

  3. Shaded Relief of Rio Sao Francisco, Brazil

    Science.gov (United States)

    2000-01-01

    This topographic image acquired by SRTM shows an area south of the Sao Francisco River in Brazil. The scrub forest terrain shows relief of about 400 meters (1300 feet). Areas such as these are difficult to map by traditional methods because of frequent cloud cover and local inaccessibility. This region has little topographic relief, but even subtle changes in topography have far-reaching effects on regional ecosystems. The image covers an area of 57 km x 79 km and represents one quarter of the 225 km SRTM swath. Colors range from dark blue at water level to white and brown at hill tops. The terrain features that are clearly visible in this image include tributaries of the Sao Francisco, the dark-blue branch-like features visible from top right to bottom left, and on the left edge of the image, and hills rising up from the valley floor. The San Francisco River is a major source of water for irrigation and hydroelectric power. Mapping such regions will allow scientists to better understand the relationships between flooding cycles, forestation and human influences on ecosystems.This shaded relief image was generated using topographic data from the Shuttle Radar Topography Mission. A computer-generated artificial light source illuminates the elevation data to produce a pattern of light and shadows. Slopes facing the light appear bright, while those facing away are shaded. On flatter surfaces, the pattern of light and shadows can reveal subtle features in the terrain. Shaded relief maps are commonly used in applications such as geologic mapping and land use planning.The Shuttle Radar Topography Mission (SRTM), launched on February 11, 2000, uses the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar (SIR-C/X-SAR) that flew twice on the Space Shuttle Endeavour in 1994. The mission is designed to collect three-dimensional measurements of the Earth's surface. To collect the 3-D data, engineers added a 60-meter-long (200

  4. Surveying immigrants without sampling frames - evaluating the success of alternative field methods.

    Science.gov (United States)

    Reichel, David; Morales, Laura

    2017-01-01

    This paper evaluates the sampling methods of an international survey, the Immigrant Citizens Survey, which aimed at surveying immigrants from outside the European Union (EU) in 15 cities in seven EU countries. In five countries, no sample frame was available for the target population. Consequently, alternative ways to obtain a representative sample had to be found. In three countries 'location sampling' was employed, while in two countries traditional methods were used with adaptations to reach the target population. The paper assesses the main methodological challenges of carrying out a survey among a group of immigrants for whom no sampling frame exists. The samples of the survey in these five countries are compared to results of official statistics in order to assess the accuracy of the samples obtained through the different sampling methods. It can be shown that alternative sampling methods can provide meaningful results in terms of core demographic characteristics although some estimates differ to some extent from the census results.

  5. Calculation of radiation exposure in diagnostic radiology. Method and surveys

    International Nuclear Information System (INIS)

    Duvauferrier, R.; Ramee, A.; Ezzeldin, K.; Guibert, J.L.

    1984-01-01

    A computerized method for evaluating the radiation exposure of the main target organs during various diagnostic radiologic procedures is described. This technique was used for educational purposes: study of exposure variations according to the technical modalities of a given procedure, and study of exposure variations according to various technical protocols (IVU, EGD barium study, etc.). This method was also used for studying exposure of patients during hospitalization in the Rennes Regional Hospital Center (France) in 1982, according to departments (urology, neurology, etc.). This method and results of these three studies are discussed [fr

  6. Survey of methods for secure connection to the internet

    Science.gov (United States)

    Matsui, Shouichi

    1994-04-01

    This paper describes a study of a security method of protecting inside network computers against outside miscreants and unwelcome visitors and a control method when these computers are connected with the Internet. In the present Internet, a method to encipher all data cannot be used, so that it is necessary to utilize PEM (Privacy Enhanced Mail) capable of the encipherment and conversion of secret information. For preventing miscreant access by eavesdropping password, one-time password is effective. The most cost-effective method is a firewall system. This system lies between the outside and inside network. By limiting computers that directly communicate with the Internet, control is centralized and inside network security is protected. If the security of firewall systems is strictly controlled under correct setting, security within the network can be secured even in open networks such as the Internet.

  7. General survey of detection methods for irradiation foods

    International Nuclear Information System (INIS)

    Yang, J. S.

    1997-01-01

    The development of detection techniques is needed, in order for regulating authorities to determine whether or not a particular food sample has been irradiated, and label it accordingly so that a consumer's free choice can be exercised. The chemical and physical changes brought about in foods by practical doses of irradiation are very small, and therefore very sensitive methods are required. A number of promising approaches have been developed and evaluated. These include chemical, physical and biological methods ranging from the very simple to highly sophisticated techniques. (author)

  8. The Canadian Human Activity Pattern Survey: report of methods and population surveyed.

    Science.gov (United States)

    Leech, J A; Wilby, K; McMullen, E; Laporte, K

    1996-01-01

    The assessment of health risk due to environmental contaminants depends upon accurate estimates of the distribution of population exposures. Exposure assessment, in turn, requires information on the time people spend in micro-environments and their activities during periods of exposure. This paper describes preliminary results including study methodology and population sampled in a large Canadian survey of time-activity patterns. A 24-hour diary recall survey was performed in 2381 households (representing a 65% response rate) to describe in detail the timing, location and activity pattern of one household member (the adult or child with the next birthday). Four cities (Toronto, Vancouver, Edmonton and Saint John, NB) and their suburbs were sampled by random-digit dialling over a nine-month period in 1994/1995. Supplemental questionnaires inquiring about sociodemographic information, house and household characteristics and potential exposure to toxins in the air and water were also administered. In general, the results show that respondents spend the majority of their time indoors (88.6%) with smaller proportions of time outdoors (6.1%) and in vehicles (5.3%). Children under the age of 12 spend more time both indoors and outdoors and less time in transit than do adults. The data from this study will be used to define more accurately the exposure of Canadians to a variety of toxins in exposure assessment models and to improve upon the accuracy of risk assessment for a variety of acute and chronic health effects known or suspected to be related to environmental exposures.

  9. Women's preferences and received pain relief in childbirth - A prospective longitudinal study in a northern region of Sweden.

    Science.gov (United States)

    Lindholm, Annika; Hildingsson, Ingegerd

    2015-06-01

    A range of alternatives in pain management during childbirth are available in the western countries. Women's preferences for and use of pain relief methods during labour is not fully investigated. The aim of this study was to describe what pain relief methods pregnant women preferred when asked in late pregnancy and to identify factors associated with preferred and received pain relief methods. A prospective longitudinal study in a northern region of Sweden (n = 936). Data were collected by three questionnaires. Odds ratios with a 95% confidence interval were calculated between preferred and received pain relief methods for several explanatory variables. The most preferred pain relief methods were also the most common received pain relief methods; nitrous oxide, bathing, breathing techniques, epidural analgesia and massage. The strongest factors for using different pain relief methods were primiparity and preferences. Women who used epidural analgesia, regardless of preference, were two to four times more likely to have a less positive birth experience. Women's preferences for a certain pain relief method were largely met. Greater differences were seen between background factors and preferences than the received pain relief methods. Preferences and primiparity were the most important factors for actually using pain relief. Epidural analgesia was associated with a less positive birth experience. Copyright © 2014 Elsevier B.V. All rights reserved.

  10. A Survey of Procedural Methods for Terrain Modelling

    NARCIS (Netherlands)

    Smelik, R.M.; Kraker, J.K. de; Groenewegen, S.A.; Tutenel, T.; Bidarra, R.

    2009-01-01

    Procedural methods are a promising but underused alternative to manual content creation. Commonly heard drawbacks are the randomness of and the lack of control over the output and the absence of integrated solutions, although more recent publications increasingly address these issues. This paper

  11. Survey of waste disposal methods in Awka metropolis | Bill | Journal ...

    African Journals Online (AJOL)

    Waste disposal methods commonly practiced in Awka metropolis, Anambra state were investigated from August to October, 2013. Data was analyzed with both descriptive statistics of frequency and percentages, and alternate hypotheses were tested using Analysis of Variance (ANOVA) at a significance level of 0.05.

  12. GPS surveying method applied to terminal area navigation flight experiments

    Energy Technology Data Exchange (ETDEWEB)

    Murata, M; Shingu, H; Satsushima, K; Tsuji, T; Ishikawa, K; Miyazawa, Y; Uchida, T [National Aerospace Laboratory, Tokyo (Japan)

    1993-03-01

    With an objective of evaluating accuracy of new landing and navigation systems such as microwave landing guidance system and global positioning satellite (GPS) system, flight experiments are being carried out using experimental aircraft. This aircraft mounts a GPS and evaluates its accuracy by comparing the standard orbits spotted by a Kalman filter from the laser tracing data on the aircraft with the navigation results. The GPS outputs position and speed information from an earth-centered-earth-fixed system called the World Geodetic System, 1984 (WGS84). However, in order to compare the navigation results with output from a reference orbit sensor or other navigation sensor, it is necessary to structure a high-precision reference coordinates system based on the WGS84. A method that applies the GPS phase interference measurement for this problem was proposed, and used actually in analyzing a flight experiment data. As referred to a case of the method having been applied to evaluating an independent navigation accuracy, the method was verified sufficiently effective and reliable not only in navigation method analysis, but also in the aspect of navigational operations. 12 refs., 10 figs., 5 tabs.

  13. Energy-Based Acoustic Source Localization Methods: A Survey

    Directory of Open Access Journals (Sweden)

    Wei Meng

    2017-02-01

    Full Text Available Energy-based source localization is an important problem in wireless sensor networks (WSNs, which has been studied actively in the literature. Numerous localization algorithms, e.g., maximum likelihood estimation (MLE and nonlinear-least-squares (NLS methods, have been reported. In the literature, there are relevant review papers for localization in WSNs, e.g., for distance-based localization. However, not much work related to energy-based source localization is covered in the existing review papers. Energy-based methods are proposed and specially designed for a WSN due to its limited sensor capabilities. This paper aims to give a comprehensive review of these different algorithms for energy-based single and multiple source localization problems, their merits and demerits and to point out possible future research directions.

  14. Biometric antispoofing methods: A survey in face recognition

    OpenAIRE

    Galbally Herrero, Javier; Marcel, Sébastien; Fiérrez, Julián

    2014-01-01

    Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works. J. Galbally, S. Marcel and J. Fierrez, "Biometric Antispoofing Methods", IEEE Access, vol.2, pp. 1530-1552, Dec. 2014 In re...

  15. Survey of analytical methods for environmental monitoring of krypton-85

    International Nuclear Information System (INIS)

    Jaquish, R.E.; Moghissi, A.A.

    1973-01-01

    Numerous methods have been developed for measuring krypton-85 in air as krypton ultimately accumulates in air once it is released into the environment. However, krypton-85 can be present in other media such as natural gas from wells stimulated with nuclear devices or in water when krypton-85 is used for aeration studies. Methods for the measurement of ambient levels of krypton-85 require a concentration of krypton from a large air sample of one m 3 or more. If elevated levels are to be measured, carrier krypton may be used provided the contamination of atmospheric krypton with krypton-85 does not interfere with the measurement. In certain cases, such as in the vicinity of nuclear fuel processing plants, direct measurement techniques may be used. A variety of techniques are employed for krypton-85 counting. At low levels, internal gas counting or organic scintillation is used to measure the beta emission of this radionuclide. At higher levels the gamma emission of krypton-85 may be measured using scintillation or solid state gamma spectroscopic methods. Techniques for collection of the sample, concentration of krypton, and radioactivity measurement of krypton-85 are discussed and various processes are critically evaluated and compared

  16. Current-drive theory I: survey of methods

    International Nuclear Information System (INIS)

    Fisch, N.J.

    1986-01-01

    A variety of methods may be employed to drive toroidal electric current in a plasma torus. The most promising scheme is the injection of radiofrequency waves into the torus to push electrons or ions. The pushing mechanism can be either the direct conversion of wave to particle momentum, or a more subtle effect involving the alteration by waves of interparticle collisions. Alternatively, current can be produced through the injection of neutral beams, the reflection of plasma radiation, or the injection of frozen pellets. The efficacy of these schemes, in a variety of regimes, will be assessed. 9 refs

  17. Survey of Cyber Security Methods for the Nuclear Power Plants

    Energy Technology Data Exchange (ETDEWEB)

    Choi, Yoo Rark; Lee, Jae Cheol; Choi, Young Soo; Hong, Seok Boong [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2009-10-15

    Cyber security includes the method of protecting information, computer programs, and other computer system assets. Hardware security, which is the security of computer assets and capital equipment, refers to computer location, access control, fire protection, and storage procedures. Such measures as badges, electronic identification keys, alarm systems, and physical barriers at entries are used for this purpose. Software security entails the protection of software assets such as Application Programs, the Operating System, and the Data Base Management System and stored information. Special user numbers and passwords are typically used to prevent unauthorized access to software and data. In addition to security for hardware and software, good internal control also requires that measures be taken to prevent loss or accidental destruction of data. Cyber attacks create substantial threats to large enterprises, including federal systems and digital I and C of a NPP (Nuclear Power Plant) is one of them. The cyber security policy for the digital I and C network of the NPP has been established for years by KINS, but its scope is very broad and conceptual. We will propose a cyber security method based on cryptography and authentication that is developed for the digital I and C network of the NPP.

  18. Survey of Cyber Security Methods for the Nuclear Power Plants

    International Nuclear Information System (INIS)

    Choi, Yoo Rark; Lee, Jae Cheol; Choi, Young Soo; Hong, Seok Boong

    2009-01-01

    Cyber security includes the method of protecting information, computer programs, and other computer system assets. Hardware security, which is the security of computer assets and capital equipment, refers to computer location, access control, fire protection, and storage procedures. Such measures as badges, electronic identification keys, alarm systems, and physical barriers at entries are used for this purpose. Software security entails the protection of software assets such as Application Programs, the Operating System, and the Data Base Management System and stored information. Special user numbers and passwords are typically used to prevent unauthorized access to software and data. In addition to security for hardware and software, good internal control also requires that measures be taken to prevent loss or accidental destruction of data. Cyber attacks create substantial threats to large enterprises, including federal systems and digital I and C of a NPP (Nuclear Power Plant) is one of them. The cyber security policy for the digital I and C network of the NPP has been established for years by KINS, but its scope is very broad and conceptual. We will propose a cyber security method based on cryptography and authentication that is developed for the digital I and C network of the NPP

  19. A survey on critical factors influencing new advertisement methods

    Directory of Open Access Journals (Sweden)

    Naser Azad

    2013-02-01

    Full Text Available Soft drink beverages are important part of many people’s foods and many prefer soft drink to water when they have dinner. Therefore, this business model can be considered as the longest lasting sector for many years and there has been not much change in these products. However, new methods of advertisement play important role for increasing market share. In this paper, we study the impact of new methods of advertisement in product development. The proposed study of this paper designs a questionnaire for one of Iranian soft drink producers, which consisted of 274 questions in Likert scale and uses factor analysis (FA to analyze the results. The study selects 250 people who live in city of Tehran, Iran and Cronbach alpha has been calculated as 0.88, which is well above the minimum desirable limit. According to our results, there were six important factors impacting in product development, including modern advertisement techniques, emotional impact, strategy of market leadership, pricing strategy, product life chain and supply entity. The most important factor loading in these six components include impact of social values, persuading unaware and uninformed customers, ability to monopolizing in production, improving pricing techniques, product life cycle and negative impact of high advertisement.

  20. Evaluation of an International Disaster Relief Team After Participation in an ASEAN Regional Forum Disaster Relief Exercise.

    Science.gov (United States)

    Lee, Jeong Il; Lee, Kang Hyun; Kim, Oh Hyun; Cha, Yong Sung; Hwang, Sung Oh; Kim, Hyun; Cha, Kyung Chul

    2016-10-01

    Devastating disasters around the world directly contribute to significant increases in human mortality and economic costs. The objective of this study was to examine the current state of the Korea Disaster Relief Team that participated in an international training module. The whole training period was videotaped in order to observe and evaluate the respondents. The survey was carried out after completion of the 3-day training, and the scores were reported by use of a 5-point Likert scale. A total of 43 respondents were interviewed for the survey, and the results showed that the overall preparedness score for international disasters was 3.4±1.6 (mean±SD). The awareness of the Incident Command System for international disasters was shown to be low (3.5±1.1). Higher scores were given to personnel who took on leadership roles in the team and who answered "I knew my duty" (4.4±0.6) in the survey, as well as to the training participants who answered "I clearly knew my duty" (4.5±0.5). The preparedness level of the Korea Disaster Relief Team was shown to be insufficient, whereas understanding of the roles of leaders and training participants in the rescue team was found to be high. It is assumed that the preparedness level for disaster relief must be improved through continued training. (Disaster Med Public Health Preparedness. 2016;1-5).

  1. Mobile phones are a viable option for surveying young Australian women: a comparison of two telephone survey methods

    Directory of Open Access Journals (Sweden)

    Liu Bette

    2011-11-01

    Full Text Available Abstract Background Households with fixed-line telephones have decreased while mobile (cell phone ownership has increased. We therefore sought to examine the feasibility of recruiting young women for a national health survey through random digit dialling mobile phones. Methods Two samples of women aged 18 to 39 years were surveyed by random digit dialling fixed and mobile numbers. We compared participation rates and responses to a questionnaire between women surveyed by each contact method. Results After dialling 5,390 fixed-lines and 3,697 mobile numbers, 140 and 128 women were recruited respectively. Among women contacted and found to be eligible, participation rates were 74% for fixed-lines and 88% for mobiles. Taking into account calls to numbers where eligibility was unknown (e.g. unanswered calls the estimated response rates were 54% and 45% respectively. Of women contacted by fixed-line, 97% reported having a mobile while 61% of those contacted by mobile reported having a fixed-line at home. After adjusting for age, there were no significant differences between mobile-only and fixed-line responders with respect to education, residence, and various health behaviours; however compared to those with fixed-lines, mobile-only women were more likely to identify as Indigenous (OR 4.99, 95%CI 1.52-16.34 and less likely to live at home with their parents (OR 0.09, 95%CI 0.03-0.29. Conclusions Random digit dialling mobile phones to conduct a health survey in young Australian women is feasible, gives a comparable response rate and a more representative sample than dialling fixed-lines only. Telephone surveys of young women should include mobile dialling.

  2. Photogrammetric methods in surveying environmental state and changes

    Energy Technology Data Exchange (ETDEWEB)

    Sitek, Z.

    1980-01-01

    Various types of maps prepared by means of photogrammetry are reviewed. So-called orthophotomaps, showing air, land or water pollution and their sources on the background of ground, vegetation and various surface objects are characterized. Methods of interpreting orthophotomaps showing environmental effects of mining coal, coal combustion and other pollution sources are reviewed. Role of statistical data in evaluation of pollution and the general environmental impact of mines or power stations are discussed. A comprehensive system of describing the condition of the natural environment, observed environmental changes, and forecasting environmental effects of coal mining, combustion and other pollution sources is described. It is called environmental monitoring. Role of photogrammetry in environmental monitoring is stressed: air photography, satellite data, and infrared photography of vegetation. (7 refs.) (In Polish)

  3. An influence of ion and sputtered atom flows inhomogeneity on time evolution of the target surface relief in glow discharge

    International Nuclear Information System (INIS)

    Bondarenko, G G; Kristya, V I

    2008-01-01

    A mathematical model of ion and sputtered atom transport in the vicinity of the target with a periodical surface relief in glow discharge in pure gas is developed. Under the assumption that the relief amplitude is small, analytical expressions for their flows are found by the perturbation method and an equation describing the relief amplitude time evolution is derived. It is shown that intensity of sputtering exceeds intensity of sputtered material re-deposition at the relief tops, and relief smoothing always takes place in the process of homogeneous target treatment in glow discharge in pure gas

  4. knowledge, attitude and use of pain relief in labour among women

    African Journals Online (AJOL)

    2014-07-01

    Jul 1, 2014 ... Objective: To find out the knowledge, attitude and practice of pain relief methods during labour among ... all of which could adversely affect uterine blood flow. Pain relief in ... knowledge was low among women who did not use any form of ... Niven et al found that memories of labour pains can evoke intense ...

  5. Proper survey methods for research of aquatic plant ecology and management

    Science.gov (United States)

    Proper survey methods are essential for objective, quantitative assessment of the distribution and abundance of aquatic plants as part of research and demonstration efforts. For research, the use of the appropriate method is an essential part of the scientific method, to ensure that the experimenta...

  6. A survey about methods dedicated to epistasis detection

    Directory of Open Access Journals (Sweden)

    Clément eNiel

    2015-09-01

    Full Text Available During the past decade, findings of genome-wide association studies (GWAS improved our knowledge and understanding of disease genetics. To date, thousands of SNPs have been associated to diseases and other complex traits. Statistical analysis typically looks for association between a phenotype and a SNP taken individually via single-locus tests. However, geneticists admit this is an oversimplified approach to tackle the complexity of underlying biological mechanisms. Interaction between SNPs, namely epistasis, must be considered. Unfortunately, epistasis detection gives rise to analytic challenges since analyzing every SNP combination is at present impractical at a genome-wide scale. In this review, we will present the main strategies recently proposed to detect epistatic interactions, along with their operating principle. Some of these methods are exhaustive, such as multifactor dimensionality reduction, likelihood ratio-based tests or receiver operating characteristic curve analysis; some are non-exhaustive, such as machine learning techniques (random forests, Bayesian networks or combinatorial optimization approaches (ant colony optimization, computational evolution system.

  7. Exercise Based- Pain Relief Program

    DEFF Research Database (Denmark)

    Zadeh, Mahdi Hossein

    in the current study was to use exercise induced- muscle damage followed by ECC as an acute pain model and observe its effects on the sensitivity of the nociceptive system and blood supply in healthy subjects. Then, the effect of a repeated bout of the same exercise as a healthy pain relief strategy......Exercise-based pain management programs are suggested for relieving from musculoskeletal pain; however the pain experienced after unaccustomed, especially eccentric exercise (ECC) alters people´s ability to participate in therapeutic exercises. Subsequent muscle pain after ECC has been shown...... to cause localized pressure pain and hyperalgesia. A prior bout of ECC has been repeatedly reported to produce a protective adaptation known as repeated bout effect (RBE). One of the main scopes of the current project was to investigate the adaptations by which the RBE can be resulted from. The approach...

  8. National Survey on Access, Use and Promotion of Rational Use of Medicines (PNAUM: household survey component methods

    Directory of Open Access Journals (Sweden)

    Sotero Serrate Mengue

    Full Text Available ABSTRACT OBJECTIVE To describe methodological aspects of the household survey National Survey on Access, Use and Promotion of Rational Use of Medicines (PNAUM related to sampling design and implementation, the actual obtained sample, instruments and fieldwork. METHODS A cross-sectional, population-based study with probability sampling in three stages of the population living in households located in Brazilian urban areas. Fieldwork was carried out between September 2013 and February 2014. The data collection instrument included questions related to: information about households, residents and respondents; chronic diseases and medicines used; use of health services; acute diseases and events treated with drugs; use of contraceptives; use of pharmacy services; behaviors that may affect drug use; package inserts and packaging; lifestyle and health insurance. RESULTS In total, 41,433 interviews were carried out in 20,404 households and 576 urban clusters corresponding to 586 census tracts distributed in the five Brazilian regions, according to eight domains defined by age and gender. CONCLUSIONS The results of the survey may be used as a baseline for future studies aiming to assess the impact of government action on drug access and use. For local studies using a compatible method, PNAUM may serve as a reference point to evaluate variations in space and population. With a comprehensive evaluation of drug-related aspects, PNAUM is a major source of data for a variety of analyses to be carried out both at academic and government level.

  9. Barriers to spousal contribution to childbirth pain relief in Nigeria.

    Science.gov (United States)

    Emelonye, A U; Pitkäaho, T; Aregbesola, A; Vehviläinen-Julkunen, K

    2017-12-01

    The aim of this study was to investigate the barriers inhibiting the use of spousal presence for childbirth pain relief in health facilities and recommendations from three perspectives: the midwife, the woman, and the spouse. Spousal presence is a non-invasive, participatory and inexpensive technique used in pain management during childbirth. Although it contributes to a large extent in relieving childbirth pain, it is underutilized in Nigerian hospitals. Overcoming the challenges impeding spousal presence and participation during childbirth will improve maternal outcome, satisfaction and midwifery care practices. A cross-sectional survey conducted in four hospitals in Nigeria involving midwives (n = 100), women (n = 142) and their spouses (n = 142) from June to December 2014 using pretested questionnaires. Five themes were identified: poor infrastructural facility, lack of adequate pain management policy, lack of midwife pain management practices, midwives' attitudes towards spousal presence during childbirth and feelings about spousal presence during childbirth pain relief. Infrastructural defects in the health facilities resulting in the lack of privacy in maternity units for both spouses and partners negatively influence the presence of a spouse during childbirth and pain relief. Adopting effective strategies such as good infrastructural facilities, staff training and spouse-friendly hospital policies will encourage spouses to fully participate in and contribute to childbirth pain relief. This study identified poor staff attitudes towards pain relief and spousal presence during childbirth as barriers. Providing adequate policies on pain management, continuous staff education and orientation on spousal relationship will improve active spousal participation and maternal satisfaction during childbirth. © 2016 International Council of Nurses.

  10. Combining Internet-Based and Postal Survey Methods in a Survey among Gynecologists: Results of a Randomized Trial.

    Science.gov (United States)

    Ernst, Sinja Alexandra; Brand, Tilman; Lhachimi, Stefan K; Zeeb, Hajo

    2018-04-01

    To assess whether a combination of Internet-based and postal survey methods (mixed-mode) compared to postal-only survey methods (postal-only) leads to improved response rates in a physician survey, and to compare the cost implications of the different recruitment strategies. All primary care gynecologists in Bremen and Lower Saxony, Germany, were invited to participate in a cross-sectional survey from January to July 2014. The sample was divided into two strata (A; B) depending on availability of an email address. Within each stratum, potential participants were randomly assigned to mixed-mode or postal-only group. In Stratum A, the mixed-mode group had a lower response rate compared to the postal-only group (12.5 vs. 20.2 percent; RR = 0.61, 95 percent CI: 0.44-0.87). In stratum B, no significant differences were found (15.6 vs. 16.2 percent; RR = 0.95, 95 percent CI: 0.62-1.44). Total costs (in €) per valid questionnaire returned (Stratum A: 399.72 vs. 248.85; Stratum B: 496.37 vs. 455.15) and per percentage point of response (Stratum A: 1,379.02 vs. 861.02; Stratum B 1,116.82 vs. 1,024.09) were higher, whereas variable costs were lower in mixed-mode compared to the respective postal-only groups (Stratum A cost ratio: 0.47, Stratum B cost ratio: 0.71). In this study, primary care gynecologists were more likely to participate by traditional postal-only than by mixed-mode survey methods that first offered an Internet option. However, the lower response rate for the mixed-mode method may be partly due to the older age structure of the responding gynecologists. Variable costs per returned questionnaire were substantially lower in mixed-mode groups and indicate the potential for cost savings if the sample population is sufficiently large. © Health Research and Educational Trust.

  11. A Delphi Method Analysis to Create an Emergency Medicine Educational Patient Satisfaction Survey

    Directory of Open Access Journals (Sweden)

    Kory S. London

    2015-12-01

    Full Text Available Introduction: Feedback on patient satisfaction (PS as a means to monitor and improve performance in patient communication is lacking in residency training. A physician’s promotion, compensation and job satisfaction may be impacted by his individual PS scores, once he is in practice. Many communication and satisfaction surveys exist but none focus on the emergency department setting for educational purposes. The goal of this project was to create an emergency medicine-based educational PS survey with strong evidence for content validity. Methods: We used the Delphi Method (DM to obtain expert opinion via an iterative process of surveying. Questions were mined from four PS surveys as well as from group suggestion. The DM analysis determined the structure, content and appropriate use of the tool. The group used four-point Likert-type scales and Lynn’s criteria for content validity to determine relevant questions from the stated goals. Results: Twelve recruited experts participated in a series of seven surveys to achieve consensus. A 10-question, single-page survey with an additional page of qualitative questions and demographic questions was selected. Thirty one questions were judged to be relevant from an original 48-question list. Of these, the final 10 questions were chosen. Response rates for individual survey items was 99.5%. Conclusion: The DM produced a consensus survey with content validity evidence. Future work will be needed to obtain evidence for response process, internal structure and construct validity.

  12. Survey nonresponse among ethnic minorities in a national health survey - a mixed-method study of participation, barriers, and potentials

    DEFF Research Database (Denmark)

    Ahlmark, Nanna; Algren, Maria Holst; Holmberg, Teresa

    2015-01-01

    , to alienation generated by the questions' focus on disease and cultural assumptions, or mistrust regarding anonymity. Ethnic minorities seem particularly affected by such barriers. To increase survey participation, questions could be sensitized to reflect multicultural traditions, and the impact of sender......Objectives. The participation rate in the Danish National Health Survey (DNHS) 2010 was significantly lower among ethnic minorities than ethnic Danes. The purpose was to characterize nonresponse among ethnic minorities in DNHS, analyze variations in item nonresponse, and investigate barriers...... and incentives to participation. Design. This was a mixed-method study. Logistic regression was used to analyze nonresponse using data from DNHS (N = 177,639 and chi-square tests in item nonresponse analyses. We explored barriers and incentives regarding participation through focus groups and cognitive...

  13. Analysis of inservice inspection relief requests

    International Nuclear Information System (INIS)

    Aldrich, D.A.; Cook, J.F.

    1989-08-01

    Nuclear Regulatory Commission (NRC) regulations require inspection (ISI) of boiling or pressurized water-cooled nuclear power plants be performed in accordance with a referenced edition and addenda of Section XI, ''Rules for Inservice Inspection of Nuclear Power Plant components,'' of the American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel Code. The regulations permit licensees to request relief from the NRC from specific ASME Code requirements that are determined to be impractical for the specific licensee. The NRC evaluates these requests and may grant such relief, but the NRC may also impose alternative or augmented inspections to assure structural reliability. The purpose,of this task was to evaluate the basis for ISI nondestructive examination (NDE) relief requests and to evaluate the effect of proposed ASME Code changes that would reduce the need for such requests or provide for more complete information in relief requests. This report contains the results of an analysis of an ISI relief request data base that has been expanded to include 1195 ISI relief requests versus the 296 relief requests covered in the first report in April 1987, EGG-SD-7430. Also relief requests were added to the data base which came from both first and second 10-year inspection intervals for several facilities. This provided the means to analyze the effect of recently approved ASME Code cases and updated Code requirements, some of which have been published as a result of earlier work on this task

  14. [Essential procedure and key methods for survey of traditional knowledge related to Chinese materia medica resources].

    Science.gov (United States)

    Cheng, Gong; Huang, Lu-qi; Xue, Da-yuan; Zhang, Xiao-bo

    2014-12-01

    The survey of traditional knowledge related to Chinese materia medica resources is the important component and one of the innovative aspects of the fourth national survey of the Chinese materia medica resources. China has rich traditional knowledge of traditional Chinese medicine (TCM) and the comprehensive investigation of TCM traditional knowledge aims to promote conservation and sustainable use of Chinese materia medica resources. Building upon the field work of pilot investigations, this paper introduces the essential procedures and key methods for conducting the survey of traditional knowledge related to Chinese materia medica resources. The essential procedures are as follows. First is the preparation phrase. It is important to review all relevant literature and provide training to the survey teams so that they have clear understanding of the concept of traditional knowledge and master key survey methods. Second is the field investigation phrase. When conducting field investigations, survey teams should identify the traditional knowledge holders by using the 'snowball method', record the traditional knowledge after obtaining prior informed concerned from the traditional knowledge holders. Researchers should fill out the survey forms provided by the Technical Specification of the Fourth National Survey of Chinese Materia Medica Resources. Researchers should pay particular attention to the scope of traditional knowledge and the method of inheriting the knowledge, which are the key information for traditional knowledge holders and potential users to reach mutual agreed terms to achieve benefit sharing. Third is the data compilation and analysis phrase. Researchers should try to compile and edit the TCM traditional knowledge in accordance with intellectual property rights requirements so that the information collected through the national survey can serve as the basic data for the TCM traditional knowledge database. The key methods of the survey include regional

  15. A Comparison of Web-Based and Paper-Based Survey Methods: Testing Assumptions of Survey Mode and Response Cost

    Science.gov (United States)

    Greenlaw, Corey; Brown-Welty, Sharon

    2009-01-01

    Web-based surveys have become more prevalent in areas such as evaluation, research, and marketing research to name a few. The proliferation of these online surveys raises the question, how do response rates compare with traditional surveys and at what cost? This research explored response rates and costs for Web-based surveys, paper surveys, and…

  16. Optimal power flow: a bibliographic survey II. Non-deterministic and hybrid methods

    Energy Technology Data Exchange (ETDEWEB)

    Frank, Stephen [Colorado School of Mines, Department of Electrical Engineering and Computer Science, Golden, CO (United States); Steponavice, Ingrida [Univ. of Jyvaskyla, Dept. of Mathematical Information Technology, Agora (Finland); Rebennack, Steffen [Colorado School of Mines, Division of Economics and Business, Golden, CO (United States)

    2012-09-15

    Over the past half-century, optimal power flow (OPF) has become one of the most important and widely studied nonlinear optimization problems. In general, OPF seeks to optimize the operation of electric power generation, transmission, and distribution networks subject to system constraints and control limits. Within this framework, however, there is an extremely wide variety of OPF formulations and solution methods. Moreover, the nature of OPF continues to evolve due to modern electricity markets and renewable resource integration. In this two-part survey, we survey both the classical and recent OPF literature in order to provide a sound context for the state of the art in OPF formulation and solution methods. The survey contributes a comprehensive discussion of specific optimization techniques that have been applied to OPF, with an emphasis on the advantages, disadvantages, and computational characteristics of each. Part I of the survey provides an introduction and surveys the deterministic optimization methods that have been applied to OPF. Part II of the survey (this article) examines the recent trend towards stochastic, or non-deterministic, search techniques and hybrid methods for OPF. (orig.)

  17. Optimal power flow: a bibliographic survey I. Formulations and deterministic methods

    Energy Technology Data Exchange (ETDEWEB)

    Frank, Stephen [Colorado School of Mines, Department of Electrical Engineering and Computer Science, Golden, CO (United States); Steponavice, Ingrida [University of Jyvaskyla, Department of Mathematical Information Technology, Agora (Finland); Rebennack, Steffen [Colorado School of Mines, Division of Economics and Business, Golden, CO (United States)

    2012-09-15

    Over the past half-century, optimal power flow (OPF) has become one of the most important and widely studied nonlinear optimization problems. In general, OPF seeks to optimize the operation of electric power generation, transmission, and distribution networks subject to system constraints and control limits. Within this framework, however, there is an extremely wide variety of OPF formulations and solution methods. Moreover, the nature of OPF continues to evolve due to modern electricity markets and renewable resource integration. In this two-part survey, we survey both the classical and recent OPF literature in order to provide a sound context for the state of the art in OPF formulation and solution methods. The survey contributes a comprehensive discussion of specific optimization techniques that have been applied to OPF, with an emphasis on the advantages, disadvantages, and computational characteristics of each. Part I of the survey (this article) provides an introduction and surveys the deterministic optimization methods that have been applied to OPF. Part II of the survey examines the recent trend towards stochastic, or non-deterministic, search techniques and hybrid methods for OPF. (orig.)

  18. Technology and Information Sharing in Disaster Relief.

    Science.gov (United States)

    Bjerge, Benedikte; Clark, Nathan; Fisker, Peter; Raju, Emmanuel

    2016-01-01

    This paper seeks to examine the extent to which technological advances can enhance inter-organizational information sharing in disaster relief. Our case is the Virtual OSOCC (On-Site Operations Coordination Centre) which is a part of the Global Disaster Alert and Coordination System (GDACS) under the United Nations Office for Coordination of Humanitarian Affairs (UN OCHA). The online platform, which has been developing for more than a decade, provides a unique insight into coordination behaviour among disaster management agencies and individual actors. We build our study on the analysis of a complete database of user interaction including more than 20,000 users and 11,000 comments spread across approximately 300 disaster events. Controlling for types and severities of the events, location-specific vulnerabilities, and the overall trends, we find that the introduction of new features have led to increases in user activity. We supplement the data-driven approach with evidence from semi-structured interviews with administrators and key users, as well as a survey among all users specifically designed to capture and assess the elements highlighted by both interviews and data analysis.

  19. Technology and Information Sharing in Disaster Relief.

    Directory of Open Access Journals (Sweden)

    Benedikte Bjerge

    Full Text Available This paper seeks to examine the extent to which technological advances can enhance inter-organizational information sharing in disaster relief. Our case is the Virtual OSOCC (On-Site Operations Coordination Centre which is a part of the Global Disaster Alert and Coordination System (GDACS under the United Nations Office for Coordination of Humanitarian Affairs (UN OCHA. The online platform, which has been developing for more than a decade, provides a unique insight into coordination behaviour among disaster management agencies and individual actors. We build our study on the analysis of a complete database of user interaction including more than 20,000 users and 11,000 comments spread across approximately 300 disaster events. Controlling for types and severities of the events, location-specific vulnerabilities, and the overall trends, we find that the introduction of new features have led to increases in user activity. We supplement the data-driven approach with evidence from semi-structured interviews with administrators and key users, as well as a survey among all users specifically designed to capture and assess the elements highlighted by both interviews and data analysis.

  20. Preparing investigation of methods for surveying tree seed demands among farmers in Tanzania

    DEFF Research Database (Denmark)

    Aabæk, Anders

    Insufficient seed supplies is often a major constraint on tree planting activities in developing countries. A central problem is to assess the actual demands for tree seed. This report shall, as a part of a PhD-study, prepare an investigation of different methods for surveying tree seed demands...... and preferences among private farmers in Tanzania. A framework for investigating seed demand and supply is outlined. The role of a national tree seed project in a seed supply sector is discussed and data requirements for strategy on seed procurement and tree improvement are outlined. Earlier surveys on seed...... demand pattern in Tanzania, Uganda and Nicaragua are discussed and a choice of strategy for an extensive survey of seed demand and supply in Tanzania is made. Different data collection methods and tools, e.g. quantitative and qualitative surveys and rapid rural appraisals, are described in detail...

  1. Methods of surveying and monitoring marine radioactivity. Report of an ad hoc panel of experts

    International Nuclear Information System (INIS)

    1965-01-01

    An effective control of the radioactive pollution of the sea depends partly on the availability of adequate technical methods for surveying and monitoring the sea and marine products with regard to the presence of radioactive substances. The purpose of this manual is to offer such methods.

  2. Non-destructive Assessment of Relief Marking Parameters of Heat Shrinkable Installation Parts for Aviation Technology

    Directory of Open Access Journals (Sweden)

    Kondratov Aleksandr P.

    2017-01-01

    Full Text Available The article explains a new method of relief marking of heat-shrinkable tubing and sleeves made of polymer materials with “shape memory effect.” Method of instrument evaluation of relief marking stereometry of installation parts for aviation equipment, made of polyvinyl chloride, polyethyleneterephthalate and polystyrene was developed and the results were explained. Parameters of pin-point relief marking and compliance of point forms to the Braille font standard were determined with the use of the non-destructive method based on the color of interference pattern with precision of 0.02 mm.

  3. Comparing two survey methods of measuring health-related indicators: Lot Quality Assurance Sampling and Demographic Health Surveys.

    Science.gov (United States)

    Anoke, Sarah C; Mwai, Paul; Jeffery, Caroline; Valadez, Joseph J; Pagano, Marcello

    2015-12-01

    Two common methods used to measure indicators for health programme monitoring and evaluation are the demographic and health surveys (DHS) and lot quality assurance sampling (LQAS); each one has different strengths. We report on both methods when utilised in comparable situations. We compared 24 indicators in south-west Uganda, where data for prevalence estimations were collected independently for the two methods in 2011 (LQAS: n = 8876; DHS: n = 1200). Data were stratified (e.g. gender and age) resulting in 37 comparisons. We used a two-sample two-sided Z-test of proportions to compare both methods. The average difference between LQAS and DHS for 37 estimates was 0.062 (SD = 0.093; median = 0.039). The average difference among the 21 failures to reject equality of proportions was 0.010 (SD = 0.041; median = 0.009); among the 16 rejections, it was 0.130 (SD = 0.010, median = 0.118). Seven of the 16 rejections exhibited absolute differences of 0.10 and 0.20 (mean = 0.261, SD = 0.083). There is 75.7% agreement across the two surveys. Both methods yield regional results, but only LQAS provides information at less granular levels (e.g. the district level) where managerial action is taken. The cost advantage and localisation make LQAS feasible to conduct more frequently, and provides the possibility for real-time health outcomes monitoring. © 2015 The Authors. Tropical Medicine & International Health Published by John Wiley & Sons Ltd.

  4. Google Street View as an alternative method to car surveys in large-scale vegetation assessments.

    Science.gov (United States)

    Deus, Ernesto; Silva, Joaquim S; Catry, Filipe X; Rocha, Miguel; Moreira, Francisco

    2015-10-01

    Car surveys (CS) are a common method for assessing the distribution of alien invasive plants. Google Street View (GSV), a free-access web technology where users may experience a virtual travel along roads, has been suggested as a cost-effective alternative to car surveys. We tested if we could replicate the results from a countrywide survey conducted by car in Portugal using GSV as a remote sensing tool, aiming at assessing the distribution of Eucalyptus globulus Labill. wildlings on roadsides adjacent to eucalypt stands. Georeferenced points gathered along CS were used to create road transects visible as lines overlapping the road in GSV environment, allowing surveying the same sampling areas using both methods. This paper presents the results of the comparison between the two methods. Both methods produced similar models of plant abundance, selecting the same explanatory variables, in the same hierarchical order of importance and depicting a similar influence on plant abundance. Even though the GSV model had a lower performance and the GSV survey detected fewer plants, additional variables collected exclusively with GSV improved model performance and provided a new insight into additional factors influencing plant abundance. The survey using GSV required ca. 9 % of the funds and 62 % of the time needed to accomplish the CS. We conclude that GSV may be a cost-effective alternative to CS. We discuss some advantages and limitations of GSV as a survey method. We forecast that GSV may become a widespread tool in road ecology, particularly in large-scale vegetation assessments.

  5. Comparing Coral Reef Survey Methods. Unesco Reports in Marine Science No. 21 Report of a Regional Unesco/UNEP Workshop on Coral Reef Survey Management and Assessment Methods in Asia and the Pacific (Phuket, Thailand, December 13-17, 1982).

    Science.gov (United States)

    United Nations Educational, Scientific, and Cultural Organization, Paris (France). Div. of Marine Sciences.

    This report includes nine papers prepared for a workshop on coral reef survey management and assessment methods in Asia and the Pacific. The papers are: "A Contrast in Methodologies between Surveying and Testing" (Charles Birkeland); "Coral Reef Survey Methods in the Andaman Sea" (Hansa Chansang); "A Review of Coral Reef…

  6. The Jamaica asthma and allergies national prevalence survey: rationale and methods

    Directory of Open Access Journals (Sweden)

    Edwards Nancy C

    2010-04-01

    Full Text Available Abstract Background Asthma is a significant public health problem in the Caribbean. Prevalence surveys using standardized measures of asthma provide valid prevalence estimates to facilitate regional and international comparisons and monitoring of trends. This paper describes methods used in the Jamaica Asthma and Allergies National Prevalence Survey, challenges associated with this survey and strategies used to overcome these challenges. Methods/Design An island wide, cross-sectional, community-based survey of asthma, asthma symptoms and allergies was done among adults and children using the European Community Respiratory Health Survey Questionnaire for adults and the International Study of Asthma and Allergies in Children. Stratified multi-stage cluster sampling was used to select 2, 163 adults aged 18 years and older and 2, 017 children aged 2-17 years for the survey. The Kish selection table was used to select one adult and one child per household. Data analysis accounted for sampling design and prevalence estimates were weighted to produce national estimates. Discussion The Jamaica Asthma and Allergies National Prevalence Survey is the first population- based survey in the Caribbean to determine the prevalence of asthma and allergies both in adults and children using standardized methods. With response rates exceeding 80% in both groups, this approach facilitated cost-effective gathering of high quality asthma prevalence data that will facilitate international and regional comparison and monitoring of asthma prevalence trends. Another unique feature of this study was the partnership with the Ministry of Health in Jamaica, which ensured the collection of data relevant for decision-making to facilitate the uptake of research evidence. The findings of this study will provide important data on the burden of asthma and allergies in Jamaica and contribute to evidence-informed planning of comprehensive asthma management and education programs.

  7. Performance of balanced bellows safety relief valves

    International Nuclear Information System (INIS)

    Lai, Y.S.

    1992-01-01

    By the nature of its design, the set point and lift of a conventional spring loaded safety relief valve are sensitive to back pressure. One way to reduce the adverse effects of the back pressure on the safety relief valve function is to install a balanced bellows in a safety relief valve. The metallic bellows has a rather wide range of manufacturing tolerance which makes the design of the bellows safety relief valve very complicated. The state-of-the-art balanced bellows safety relief valve can only substantially minimize, but cannot totally eliminate the back pressure effects on its set point and relieving capacity. Set point change is a linear function of the back pressure to the set pressure ratio. Depending on the valve design, the set point correction factor can be either greater or smaller than unity. There exists an allowable back pressure and critical back pressure for each safety relief valve. When total back pressure exceeds the R a , the relieving capacity will be reduced mainly resulting from the valve lift being reduced by the back pressure and the capacity reduction factor should be applied in valve sizing. Once the R c is exceeded, the safety relief valve becomes unstable and loses its over pressure protection capability. The capacity reduction factor is a function of system overpressure, but their relationship is non-linear in nature. (orig.)

  8. Study on method of dose estimation for the Dual-moderated neutron survey meter

    International Nuclear Information System (INIS)

    Zhou, Bo; Li, Taosheng; Xu, Yuhai; Gong, Cunkui; Yan, Qiang; Li, Lei

    2013-01-01

    In order to study neutron dose measurement in high energy radiation field, a Dual-moderated survey meter in the range from 1 keV to 300 MeV mean energies spectra has been developed. Measurement results of some survey meters depend on the neutron spectra characteristics in different neutron radiation fields, so the characteristics of the responses to various neutron spectra should be studied in order to get more reasonable dose. In this paper the responses of the survey meter were calculated under different neutron spectra data from IAEA of Technical Reports Series No. 318 and other references. Finally one dose estimation method was determined. The range of the reading per H*(10) for the method estimated is about 0.7–1.6 for the neutron mean energy range from 50 keV to 300 MeV. -- Highlights: • We studied a novel high energy neutron survey meter. • Response characteristics of the survey meter were calculated by using a series of neutron spectra. • One significant advantage of the survey meter is that it can provide mean energy of radiation field. • Dose estimate deviation can be corrected. • The range of corrected reading per H*(10) is about 0.7–1.6 for the neutron fluence mean energy range from 0.05 MeV to 300 MeV

  9. [Data validation methods and discussion on Chinese materia medica resource survey].

    Science.gov (United States)

    Zhang, Yue; Ma, Wei-Feng; Zhang, Xiao-Bo; Zhu, Shou-Dong; Guo, Lan-Ping; Wang, Xing-Xing

    2013-07-01

    From the beginning of the fourth national survey of the Chinese materia medica resources, there were 22 provinces have conducted pilots. The survey teams have reported immense data, it put forward the very high request to the database system construction. In order to ensure the quality, it is necessary to check and validate the data in database system. Data validation is important methods to ensure the validity, integrity and accuracy of census data. This paper comprehensively introduce the data validation system of the fourth national survey of the Chinese materia medica resources database system, and further improve the design idea and programs of data validation. The purpose of this study is to promote the survey work smoothly.

  10. Suicide Prevention for Local Public and Volunteer Relief Workers in Disaster-Affected Areas.

    Science.gov (United States)

    Wang, Xiao Lu; Yip, Paul S F; Chan, Cecilia L W

    2016-01-01

    Local workforces play a critical role in disaster relief and reconstruction. However, the mental health of local relief workers might be affected by disasters, threatening the sustainability of local workforces. In this study, we tried to address this concern by investigating the well-being of local relief workers and its association with suicidal ideation. A retrospective study was conducted. Surveys were designed to collect data from a purposive sample of local disaster relief workers who survived a disaster. Binary logistic regression analysis was performed to test hypotheses. The study sample was from a population of local relief workers in the worst quake-hit regions in China in 2008. The respondents were local relief workers from a town in these regions. All of the 83 local relief workers were invited 11 months after the earthquake, and 70 joined the study, resulting in a response rate of 84.3%. The dependent variable was postdisaster suicidal ideation. The independent variables were bereavement, depression and posttraumatic stress, daily work hours, job burnout, work-family conflict, and work engagement. Approximately 21.4% of participants reported suicidal ideation after the earthquake in comparison with 7.1% before the earthquake. One potential risk factor was an interaction effect of job burnout and work-family conflict (odds ratio [OR] = 3.738; 95% confidence interval [CI], 1.086-12.868). Potential protective factors included daily work hours (OR = 0.317; 95% CI, 0.106-0.952) and work engagement (OR = 0.297; 95% CI, 0.091-0.969). Findings suggest that for local relief workers who are also disaster survivors, meaningful engagement such as participation in disaster relief could be salutary to their mental health, but overwork and interference with personal life could be harmful and increase the risk of suicidal ideation. Discretion is needed in managing local workforces, particularly with long work hours and work-family balance.

  11. Estimating health expectancies from two cross-sectional surveys: The intercensal method

    Directory of Open Access Journals (Sweden)

    Michel Guillot

    2009-10-01

    Full Text Available Health expectancies are key indicators for monitoring the health of populations, as well as for informing debates about compression or expansion of morbidity. However, current methodologies for estimating them are not entirely satisfactory. They are either of limited applicability because of high data requirements (the multistate method or based on questionable assumptions (the Sullivan method. This paper proposes a new method, called the "intercensal" method, which relies on the multistate framework but uses widely available data. The method uses age-specific proportions "healthy" at two successive, independent cross-sectional health surveys, and, together with information on general mortality, solves for the set of transition probabilities that produces the observed sequence of proportions healthy. The system is solved by making realistic parametric assumptions about the age patterns of transition probabilities. Using data from the Health and Retirement Survey (HRS and from the National Health Interview Survey (NHIS, the method is tested against both the multistate method and the Sullivan method. We conclude that the intercensal approach is a promising framework for the indirect estimation of health expectancies.

  12. Ear Acupuncture versus  local anaestethic for pain relief during perineal repair - a randomised controlled trial

    DEFF Research Database (Denmark)

    Kindberg, Sara

    2007-01-01

    ACUPUNCTURE OR LOCAL ANAESTETICS FOR PAIN RELIEF DURING PERINEAL REPAIR AFTER VAGINAL DELIVERY: A RANDOMISED CONTROLLED TRIAL.   By:  Sara Kindberg. Midwife and PhD student, Sønderborg Hospital, Denmark. Objective: To evaluate acupuncture as a new method of pain relief for postpartum perineal...... as photos of the acupuncture points. Perspectives:  Basic midwifery services such as providing sufficient pain relief during perineal repair still need improvement. Clinical practice should be improved continuously and thus produce reliable evidence on different pain relief methods. Website:        http...

  13. Shaded Relief of Minnesota Elevation - Color

    Data.gov (United States)

    Minnesota Department of Natural Resources — This file is a product of a shaded relief process on the 30 meter resolution Digital Elevation Model data (dem30im3). This image was created using a custom AML...

  14. Shaded Relief of Minnesota Elevation - Black & White

    Data.gov (United States)

    Minnesota Department of Natural Resources — This file is a product of a shaded relief process on the 30 meter resolution Digital Elevation Model data (dem30im3). This image was created using a custom AML...

  15. Brain Circuits Encoding Reward from Pain Relief.

    Science.gov (United States)

    Navratilova, Edita; Atcherley, Christopher W; Porreca, Frank

    2015-11-01

    Relief from pain in humans is rewarding and pleasurable. Primary rewards, or reward-predictive cues, are encoded in brain reward/motivational circuits. While considerable advances have been made in our understanding of reward circuits underlying positive reinforcement, less is known about the circuits underlying the hedonic and reinforcing actions of pain relief. We review findings from electrophysiological, neuroimaging, and behavioral studies supporting the concept that the rewarding effect of pain relief requires opioid signaling in the anterior cingulate cortex (ACC), activation of midbrain dopamine neurons, and the release of dopamine in the nucleus accumbens (NAc). Understanding of circuits that govern the reward of pain relief may allow the discovery of more effective and satisfying therapies for patients with acute or chronic pain.

  16. Non-Drug Pain Relief: Imagery

    Science.gov (United States)

    PATIENT EDUCATION patienteducation.osumc.edu Non-Drug Pain Relief: Imagery Relaxation helps lessen tension. One way to help decrease pain is to use imagery. Imagery is using your imagination to create a ...

  17. Supply Chain Management in Humanitarian Relief Logistics

    National Research Council Canada - National Science Library

    Rodman, William

    2004-01-01

    Hundreds of millions of people are affected by disasters each year. This thesis explores the use of supply chain management techniques to overcome the barriers encountered by logistics managers during humanitarian relief operations...

  18. U.S. Coastal Relief Model - Hawaii

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — NGDC's U.S. Coastal Relief Model (CRM) provides the first comprehensive view of the U.S. coastal zone integrating offshore bathymetry with land topography into a...

  19. U.S. Coastal Relief Model

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — NGDC's U.S. Coastal Relief Model (CRM) provides the first comprehensive view of the U.S. coastal zone integrating offshore bathymetry with land topography into a...

  20. Lake Bathymetric DEM Shaded Relief Image

    Data.gov (United States)

    Minnesota Department of Natural Resources — Geo-referenced, shaded relief image of lake bathymetry classified at 5-foot depth intervals. This dataset has a cell resolution of 5 meters (occasionally 10m) as...

  1. The Team Approach to Pain Relief

    Science.gov (United States)

    ... Navigation Bar Home Current Issue Past Issues The Team Approach to Pain Relief Past Issues / Fall 2007 ... Roberts is seen here with some of the team members, (left to right) Dr. Berger, Jacques Bolle, ...

  2. Establishing survey validity and reliability for American Indians through "think aloud" and test-retest methods.

    Science.gov (United States)

    Hauge, Cindy Horst; Jacobs-Knight, Jacque; Jensen, Jamie L; Burgess, Katherine M; Puumala, Susan E; Wilton, Georgiana; Hanson, Jessica D

    2015-06-01

    The purpose of this study was to use a mixed-methods approach to determine the validity and reliability of measurements used within an alcohol-exposed pregnancy prevention program for American Indian women. To develop validity, content experts provided input into the survey measures, and a "think aloud" methodology was conducted with 23 American Indian women. After revising the measurements based on this input, a test-retest was conducted with 79 American Indian women who were randomized to complete either the original measurements or the new, modified measurements. The test-retest revealed that some of the questions performed better for the modified version, whereas others appeared to be more reliable for the original version. The mixed-methods approach was a useful methodology for gathering feedback on survey measurements from American Indian participants and in indicating specific survey questions that needed to be modified for this population. © The Author(s) 2015.

  3. Sampling methods. A survey of methods in use in the Nordic countries

    International Nuclear Information System (INIS)

    Isaksson, M.

    2000-10-01

    This report is a survey of sampling techniques currently in use for radioactivity measurements in the Nordic countries, but restricted to sampling techniques for pasture, soil and deposition in emergency situations. It is found that the participating laboratories apply similar sampling procedures for pasture, including cutting height and size of sampled areas. Soil samples are generally taken by some sort of corer of different diameter. The number of cores taken varies, different sampling patterns are used, and pooling of the samples is done by some of the laboratories. The analysis of pasture and of soil is made with Nal-detectors or by high-resolution gamma spectrometry on fresh or dried samples. Precipitation collectors of a range of sizes are used to determine the activity concentration in precipitation and of dry deposited radionuclides. The analysis is made with high-resolution gamma-spectrometry, either directly on a water sample or on ion exchange resins. (au)

  4. Pain Relief for Budget Cuts.

    Science.gov (United States)

    Fultz, David A.

    1983-01-01

    The Grand Blanc (Michigan) Community School District sets budget priorities by (1) surveying students, taxpayers, and teachers to learn their preferences for current programs and services; (2) determining the costs of state-mandated programs; (3) listing nonmandated programs and determining their costs; and (4) considering proposed new programs.…

  5. Analysis of method of polarization surveying of water surface oil pollution

    Science.gov (United States)

    Zhukov, B. S.

    1979-01-01

    A method of polarization surveying of oil films on the water surface is analyzed. Model calculations of contrasted oil and water obtained with different orientations of the analyzer are discussed. The model depends on the spectral range, water transparency and oil film, and the selection of observational direction.

  6. Examining Stress in Graduate Assistants: Combining Qualitative and Quantitative Survey Methods

    Science.gov (United States)

    Mazzola, Joseph J.; Walker, Erin J.; Shockley, Kristen M.; Spector, Paul E.

    2011-01-01

    The aim of this study was to employ qualitative and quantitative survey methods in a concurrent mixed model design to assess stressors and strains in graduate assistants. The stressors most frequently reported qualitatively were work overload, interpersonal conflict, and organizational constraints; the most frequently reported psychological…

  7. Sample size methods for estimating HIV incidence from cross-sectional surveys.

    Science.gov (United States)

    Konikoff, Jacob; Brookmeyer, Ron

    2015-12-01

    Understanding HIV incidence, the rate at which new infections occur in populations, is critical for tracking and surveillance of the epidemic. In this article, we derive methods for determining sample sizes for cross-sectional surveys to estimate incidence with sufficient precision. We further show how to specify sample sizes for two successive cross-sectional surveys to detect changes in incidence with adequate power. In these surveys biomarkers such as CD4 cell count, viral load, and recently developed serological assays are used to determine which individuals are in an early disease stage of infection. The total number of individuals in this stage, divided by the number of people who are uninfected, is used to approximate the incidence rate. Our methods account for uncertainty in the durations of time spent in the biomarker defined early disease stage. We find that failure to account for this uncertainty when designing surveys can lead to imprecise estimates of incidence and underpowered studies. We evaluated our sample size methods in simulations and found that they performed well in a variety of underlying epidemics. Code for implementing our methods in R is available with this article at the Biometrics website on Wiley Online Library. © 2015, The International Biometric Society.

  8. A Survey on Chinese Scholars' Adoption of Mixed Methods

    Science.gov (United States)

    Zhou, Yuchun

    2018-01-01

    Since the 1980s when mixed methods emerged as "the third research methodology", it was widely adopted in Western countries. However, inadequate literature revealed how this methodology was accepted by scholars in Asian countries, such as China. Therefore, this paper used a quantitative survey to investigate Chinese scholars' perceptions…

  9. A Mixed Methods Survey Research Study of Novice Special Education Teachers: Investigation of Reading Preparedness

    Science.gov (United States)

    Stratton, Mary P.

    2017-01-01

    Novice special education teachers have become an integral part of the public and private school systems throughout Pennsylvania. This mixed-methods research study explored the expertise and preparedness of current novice special education teachers. A combination of an electronic survey questionnaire and phone and face-to-face interviews were…

  10. Survey of systems safety analysis methods and their application to nuclear waste management systems

    International Nuclear Information System (INIS)

    Pelto, P.J.; Winegardner, W.K.; Gallucci, R.H.V.

    1981-11-01

    This report reviews system safety analysis methods and examines their application to nuclear waste management systems. The safety analysis methods examined include expert opinion, maximum credible accident approach, design basis accidents approach, hazard indices, preliminary hazards analysis, failure modes and effects analysis, fault trees, event trees, cause-consequence diagrams, G0 methodology, Markov modeling, and a general category of consequence analysis models. Previous and ongoing studies on the safety of waste management systems are discussed along with their limitations and potential improvements. The major safety methods and waste management safety related studies are surveyed. This survey provides information on what safety methods are available, what waste management safety areas have been analyzed, and what are potential areas for future study

  11. Survey of systems safety analysis methods and their application to nuclear waste management systems

    Energy Technology Data Exchange (ETDEWEB)

    Pelto, P.J.; Winegardner, W.K.; Gallucci, R.H.V.

    1981-11-01

    This report reviews system safety analysis methods and examines their application to nuclear waste management systems. The safety analysis methods examined include expert opinion, maximum credible accident approach, design basis accidents approach, hazard indices, preliminary hazards analysis, failure modes and effects analysis, fault trees, event trees, cause-consequence diagrams, G0 methodology, Markov modeling, and a general category of consequence analysis models. Previous and ongoing studies on the safety of waste management systems are discussed along with their limitations and potential improvements. The major safety methods and waste management safety related studies are surveyed. This survey provides information on what safety methods are available, what waste management safety areas have been analyzed, and what are potential areas for future study.

  12. An automated radiological survey method for performing site remediation and decommissioning

    International Nuclear Information System (INIS)

    Handy, R.G.; Bolch, W.E.; Harder, G.F.; Tolaymat, T.M.

    1994-01-01

    A portable, computer-based method of performing environmental monitoring and assessment for site remediation and decommissioning has been developed. The integrated system has been developed to provide for survey time reductions and real-time data analysis. The technique utilizes a notebook 486 computer with the necessary hardware and software components that makes it possible to be used in an almost unlimited number of environmental monitoring and assessment scenarios. The results from a pilot, open-quotes hide-and-seekclose quotes gamma survey and an actual alpha decontamination survey were elucidated. It was found that a open-quotes hide-and-seekclose quotes survey could come up with timely and accurate conclusions about the position of the source. The use of the automated system in a Th-232 alpha survey resulted in a reduction in the standard time necessary to do a radiological survey. In addition, the ability to analyze the data on-site allowed for identification and location of areas which needed further decontamination. Finally, a discussion on possible future improvements and field conclusions was made

  13. Studying Cannabis Use Behaviors With Facebook and Web Surveys: Methods and Insights

    Science.gov (United States)

    2018-01-01

    The rapid and wide-reaching expansion of internet access and digital technologies offers epidemiologists numerous opportunities to study health behaviors. One particularly promising new data collection strategy is the use of Facebook’s advertising platform in conjunction with Web-based surveys. Our research team at the Center for Technology and Behavioral Health has used this quick and cost-efficient method to recruit large samples and address unique scientific questions related to cannabis use. In conducting this research, we have gleaned several insights for using this sampling method effectively and have begun to document the characteristics of the resulting data. We believe this information could be useful to other researchers attempting to study cannabis use or, potentially, other health behaviors. The first aim of this paper is to describe case examples of procedures for using Facebook as a survey sampling method for studying cannabis use. We then present several distinctive features of the data produced using this method. Finally, we discuss the utility of this sampling method for addressing specific types of epidemiological research questions. Overall, we believe that sampling with Facebook advertisements and Web surveys is best conceptualized as a targeted, nonprobability-based method for oversampling cannabis users across the United States. PMID:29720366

  14. Research on 3-D terrain correction methods of airborne gamma-ray spectrometry survey

    International Nuclear Information System (INIS)

    Liu Yanyang; Liu Qingcheng; Zhang Zhiyong

    2008-01-01

    The general method of height correction is not effectual in complex terrain during the process of explaining airborne gamma-ray spectrometry data, and the 2-D terrain correction method researched in recent years is just available for correction of section measured. A new method of 3-D sector terrain correction is studied. The ground radiator is divided into many small sector radiators by the method, then the irradiation rate is calculated in certain survey distance, and the total value of all small radiate sources is regarded as the irradiation rate of the ground radiator at certain point of aero- survey, and the correction coefficients of every point are calculated which then applied to correct to airborne gamma-ray spectrometry data. The method can achieve the forward calculation, inversion calculation and terrain correction for airborne gamma-ray spectrometry survey in complex topography by dividing the ground radiator into many small sectors. Other factors are considered such as the un- saturated degree of measure scope, uneven-radiator content on ground, and so on. The results of for- ward model and an example analysis show that the 3-D terrain correction method is proper and effectual. (authors)

  15. Studying Cannabis Use Behaviors With Facebook and Web Surveys: Methods and Insights.

    Science.gov (United States)

    Borodovsky, Jacob T; Marsch, Lisa A; Budney, Alan J

    2018-05-02

    The rapid and wide-reaching expansion of internet access and digital technologies offers epidemiologists numerous opportunities to study health behaviors. One particularly promising new data collection strategy is the use of Facebook's advertising platform in conjunction with Web-based surveys. Our research team at the Center for Technology and Behavioral Health has used this quick and cost-efficient method to recruit large samples and address unique scientific questions related to cannabis use. In conducting this research, we have gleaned several insights for using this sampling method effectively and have begun to document the characteristics of the resulting data. We believe this information could be useful to other researchers attempting to study cannabis use or, potentially, other health behaviors. The first aim of this paper is to describe case examples of procedures for using Facebook as a survey sampling method for studying cannabis use. We then present several distinctive features of the data produced using this method. Finally, we discuss the utility of this sampling method for addressing specific types of epidemiological research questions. Overall, we believe that sampling with Facebook advertisements and Web surveys is best conceptualized as a targeted, nonprobability-based method for oversampling cannabis users across the United States. ©Jacob T Borodovsky, Lisa A Marsch, Alan J Budney. Originally published in JMIR Public Health and Surveillance (http://publichealth.jmir.org), 02.05.2018.

  16. Methods of removing uranium from drinking water. 1. A literature survey. 2. Present municipal water treatment and potential removal methods

    International Nuclear Information System (INIS)

    Drury, J.S.; Michelson, D.; Ensminger, J.T.; Lee, S.Y.; White, S.K.

    1982-12-01

    Literature was searched for methods of removing uranium from drinking water. U.S. manufacturers and users of water-treatment equipment and products were also contacted regarding methods of removing uranium from potable water. Based on the results of these surveys, it was recommended that untreated, partially treated, and finished water samples from municipal water-treatment facilities be analyzed to determine the extent of removal of uranium by presently used procedures, and that additional laboratory studies be performed to determine what changes are needed to maximize the effectiveness of treatments that are already in use in existing water-treatment plants

  17. Results of a survey on accident and safety analysis codes, benchmarks, verification and validation methods

    International Nuclear Information System (INIS)

    Lee, A.G.; Wilkin, G.B.

    1995-01-01

    This report is a compilation of the information submitted by AECL, CIAE, JAERI, ORNL and Siemens in response to a need identified at the 'Workshop on R and D Needs' at the IGORR-3 meeting. The survey compiled information on the national standards applied to the Safety Quality Assurance (SQA) programs undertaken by the participants. Information was assembled for the computer codes and nuclear data libraries used in accident and safety analyses for research reactors and the methods used to verify and validate the codes and libraries. Although the survey was not comprehensive, it provides a basis for exchanging information of common interest to the research reactor community

  18. Scientists' attitudes on science and values: Case studies and survey methods in philosophy of science.

    Science.gov (United States)

    Steel, Daniel; Gonnerman, Chad; O'Rourke, Michael

    2017-06-01

    This article examines the relevance of survey data of scientists' attitudes about science and values to case studies in philosophy of science. We describe two methodological challenges confronting such case studies: 1) small samples, and 2) potential for bias in selection, emphasis, and interpretation. Examples are given to illustrate that these challenges can arise for case studies in the science and values literature. We propose that these challenges can be mitigated through an approach in which case studies and survey methods are viewed as complementary, and use data from the Toolbox Dialogue Initiative to illustrate this claim. Copyright © 2017 Elsevier Ltd. All rights reserved.

  19. Random sampling of quantum states: a survey of methods and some issues regarding the Overparametrized Method

    International Nuclear Information System (INIS)

    Maziero, Jonas

    2015-01-01

    The numerical generation of random quantum states (RQS) is an important procedure for investigations in quantum information science. Here, we review some methods that may be used for performing that task. We start by presenting a simple procedure for generating random state vectors, for which the main tool is the random sampling of unbiased discrete probability distributions (DPD). Afterwards, the creation of random density matrices is addressed. In this context, we first present the standard method, which consists in using the spectral decomposition of a quantum state for getting RQS from random DPDs and random unitary matrices. In the sequence, the Bloch vector parametrization method is described. This approach, despite being useful in several instances, is not in general convenient for RQS generation. In the last part of the article, we regard the overparametrized method (OPM) and the related Ginibre and Bures techniques. The OPM can be used to create random positive semidefinite matrices with unit trace from randomly produced general complex matrices in a simple way that is friendly for numerical implementations. We consider a physically relevant issue related to the possible domains that may be used for the real and imaginary parts of the elements of such general complex matrices. Subsequently, a too fast concentration of measure in the quantum state space that appears in this parametrization is noticed. (author)

  20. Research and application of soil-mercury-surveys method for locating uranium

    International Nuclear Information System (INIS)

    You Yunfei; Lu Shili; Jiao Zongrun

    1995-06-01

    Soil-Hg-Surveys method for locating uranium ore was presented. Soil-sampler of drilling bottom, the ability of surveying the deep uranium orebodies was raised by using this method. Application of minicomputer technology to pyrolytic-Hg-analysis raises the degree of automation and precision of the analysis. Application condition of optimum is Hg content of orebodies >1 x 10 -6 . Locating deep is about 100 m. The forecast of uranium orebodies achieved success in two unknown section that are 534 and 510 mining area, therefore two little size deposits expanded into middle size deposits. This method is as well applicable to locating gold, silver, copper, lead zinc and oil-gas natural resource and so on. (8 figs., 3 tabs.)

  1. Results of a survey on accident and safety analysis codes, benchmarks, verification and validation methods

    International Nuclear Information System (INIS)

    Lee, A.G.; Wilkin, G.B.

    1996-03-01

    During the 'Workshop on R and D needs' at the 3rd Meeting of the International Group on Research Reactors (IGORR-III), the participants agreed that it would be useful to compile a survey of the computer codes and nuclear data libraries used in accident and safety analyses for research reactors and the methods various organizations use to verify and validate their codes and libraries. Five organizations, Atomic Energy of Canada Limited (AECL, Canada), China Institute of Atomic Energy (CIAE, People's Republic of China), Japan Atomic Energy Research Institute (JAERI, Japan), Oak Ridge National Laboratories (ORNL, USA), and Siemens (Germany) responded to the survey. The results of the survey are compiled in this report. (author) 36 refs., 3 tabs

  2. Web-based Survey Data Collection With Peer Support and Advocacy Organizations: Implications of Participatory Methods.

    Science.gov (United States)

    Ostrow, Laysha; Penney, Darby; Stuart, Elizabeth; Leaf, Phillip J

    2017-01-01

    The 2012 National Survey of Peer-Run Organizations is one of the first to survey a nationally representative sample of mental health peer-run organizations, nonprofit venues for support and advocacy which are defined by people with psychiatric histories being in positions of authority and control. This paper describes data collection methods and demonstrates how participatory strategies to involve people with psychiatric histories intersected with Internet research to achieve study aims. People with psychiatric histories were involved in designing and implementing a web-based survey to collect data on peer-run organizations' operations and views on national policy. Participatory approaches were used throughout design, data collection analysis, and dissemination. The extensive involvement of people with psychiatric histories in project design and implementation were important strategies that contributed to this study's success.

  3. GPR survey, as one of the best geophysical methods for social and industrial needs

    Science.gov (United States)

    Chernov, Anatolii

    2016-04-01

    This paper is about ways and methods of applying non-invasive geophysical method - Ground penetrating radar (GPR) survey in different spheres of science, industry, social life and culture. Author would like to show that geological methods could be widely used for solving great variety of industrial, human safety and other problems. In that article, we take GPR survey as an example of such useful geophysical methods. It is a fact that investigation of near surface underground medium is important process, which influence on development of different spheres of science and social life: investigation of near surface geology (layering, spreading of rock types, identification of voids, etc.), hydrogeology (depth to water horizons, their thickness), preparation step for construction of roads and buildings (civil geology, engineering geology), investigation of cultural heritage (burial places, building remains,...), ecological investigations (land slides, variation in underground water level, etc.), glaciology. These tasks can be solved by geological methods, but as usual, geophysical survey takes a lot of time and energy (especially electric current and resistivity methods, seismic survey). Author claims that GPR survey can be performed faster than other geophysical surveys and results of GPR survey are informative enough to make proper conclusions. Some problems even cannot be solved without GPR. For example, identification of burial place (one of author's research objects): results of magnetic and electric resistivity tomography survey do not contain enough information to identify burial place, but according to anomalies on GPR survey radarograms, presence of burial place can be proven. Identification of voids and non-magnetic objects also hardly can be done by another non-invasive geophysics surveys and GPR is applicable for that purpose. GPR can be applied for monitoring of dangerous processes in geological medium under roads, buildings, parks and other places of human

  4. Diffraction efficiency calculations of polarization diffraction gratings with surface relief

    Science.gov (United States)

    Nazarova, D.; Sharlandjiev, P.; Berberova, N.; Blagoeva, B.; Stoykova, E.; Nedelchev, L.

    2018-03-01

    In this paper, we evaluate the optical response of a stack of two diffraction gratings of equal one-dimensional periodicity. The first one is a surface-relief grating structure; the second, a volume polarization grating. This model is based on our experimental results from polarization holographic recordings in azopolymer films. We used films of commercially available azopolymer (poly[1-[4-(3-carboxy-4-hydroxyphenylazo) benzenesulfonamido]-1,2-ethanediyl, sodium salt]), shortly denoted as PAZO. During the recording process, a polarization grating in the volume of the material and a relief grating on the film surface are formed simultaneously. In order to evaluate numerically the optical response of this “hybrid” diffraction structure, we used the rigorous coupled-wave approach (RCWA). It yields stable numerical solutions of Maxwell’s vector equations using the algebraic eigenvalue method.

  5. Contingent valuation method applied to survey on personal preferences on choice of electric power source

    International Nuclear Information System (INIS)

    Takahashi, Reiko; Nakagome, Yoshihiro

    2004-01-01

    A Survey was conducted on personal preferences regarding their choice of electric power source to verify the applicability of Contingent Valuation Method (CVM) to such analysis. The survey was carried out on local and urban inhabitants in two steps, first by mail and thereafter by direct interview. A choice of four typical forms of power source was presented: nuclear, coal, hydro and green power; and the question was asked whether the respondent would be willing to pay additional charge for specifying their preferable power source. The mail survey indicated more than half of the respondents hold some willingness to pay either for disuse of nuclear power or expansion of green power. The interview survey revealed various complex motives lying behind their answers. Consequently, it was found that their preference is significantly correlated to their personal image or knowledge of power sources, their thinking or attitude toward energy conservation, their sense of consumption and their private view of life. It is concluded that CVM is pertinently applicable to quantitative analysis of individual opinions, particularly in terms of their motivation to participate in national energy issues. A number of modifications, however, should be required to be brought to the survey design in order to ensure smooth application in practice. (author)

  6. A Survey of Symplectic and Collocation Integration Methods for Orbit Propagation

    Science.gov (United States)

    Jones, Brandon A.; Anderson, Rodney L.

    2012-01-01

    Demands on numerical integration algorithms for astrodynamics applications continue to increase. Common methods, like explicit Runge-Kutta, meet the orbit propagation needs of most scenarios, but more specialized scenarios require new techniques to meet both computational efficiency and accuracy needs. This paper provides an extensive survey on the application of symplectic and collocation methods to astrodynamics. Both of these methods benefit from relatively recent theoretical developments, which improve their applicability to artificial satellite orbit propagation. This paper also details their implementation, with several tests demonstrating their advantages and disadvantages.

  7. Short assessment of the Big Five: robust across survey methods except telephone interviewing.

    Science.gov (United States)

    Lang, Frieder R; John, Dennis; Lüdtke, Oliver; Schupp, Jürgen; Wagner, Gert G

    2011-06-01

    We examined measurement invariance and age-related robustness of a short 15-item Big Five Inventory (BFI-S) of personality dimensions, which is well suited for applications in large-scale multidisciplinary surveys. The BFI-S was assessed in three different interviewing conditions: computer-assisted or paper-assisted face-to-face interviewing, computer-assisted telephone interviewing, and a self-administered questionnaire. Randomized probability samples from a large-scale German panel survey and a related probability telephone study were used in order to test method effects on self-report measures of personality characteristics across early, middle, and late adulthood. Exploratory structural equation modeling was used in order to test for measurement invariance of the five-factor model of personality trait domains across different assessment methods. For the short inventory, findings suggest strong robustness of self-report measures of personality dimensions among young and middle-aged adults. In old age, telephone interviewing was associated with greater distortions in reliable personality assessment. It is concluded that the greater mental workload of telephone interviewing limits the reliability of self-report personality assessment. Face-to-face surveys and self-administrated questionnaire completion are clearly better suited than phone surveys when personality traits in age-heterogeneous samples are assessed.

  8. A Survey of a System of Methods for Fire Safety Design of Traditional Concrete Constructions

    DEFF Research Database (Denmark)

    Hertz, Kristian

    2000-01-01

    constructions DS411. And the bases for many of the methods have been distributed by CIB W14 reports. But a survey of all the methods in coherence has never been presented, and much of this documentation and the additional documentation produced for the work with the codes needs still to be printed in papers......During the years since 1978 the author has been developing a series of calculation methods and sup-porting test methods for the fire safety design of concrete constructions. The basic methods have been adopted in the fire chapters of the Eurocode ENV1992-1-2 and the Danish code for concrete.......It is the aim of this paper to give a coherent presentation of the design methods, their degree of documentation and the available references in order to facilitate the application of them....

  9. Comparison of survey and photogrammetry methods to position gravity data, Yucca Mountain, Nevada

    International Nuclear Information System (INIS)

    Ponce, D.A.; Wu, S.S.C.; Spielman, J.B.

    1985-01-01

    Locations of gravity stations at Yucca Mountain, Nevada, were determined by a survey using an electronic distance-measuring device and by a photogram-metric method. The data from both methods were compared to determine if horizontal and vertical coordinates developed from photogrammetry are sufficently accurate to position gravity data at the site. The results show that elevations from the photogrammetric data have a mean difference of 0.57 +- 0.70 m when compared with those of the surveyed data. Comparison of the horizontal control shows that the two methods agreed to within 0.01 minute. At a latitude of 45 0 , an error of 0.01 minute (18 m) corresponds to a gravity anomaly error of 0.015 mGal. Bouguer gravity anomalies are most sensitive to errors in elevation, thus elevation is the determining factor for use of photogrammetric or survey methods to position gravity data. Because gravity station positions are difficult to locate on aerial photographs, photogrammetric positions are not always exactly at the gravity station; therefore, large disagreements may appear when comparing electronic and photogrammetric measurements. A mean photogrammetric elevation error of 0.57 m corresponds to a gravity anomaly error of 0.11 mGal. Errors of 0.11 mGal are too large for high-precision or detailed gravity measurements but acceptable for regional work. 1 ref. 2 figs., 4 tabs

  10. The use of qualitative methods to inform Delphi surveys in core outcome set development.

    Science.gov (United States)

    Keeley, T; Williamson, P; Callery, P; Jones, L L; Mathers, J; Jones, J; Young, B; Calvert, M

    2016-05-04

    Core outcome sets (COS) help to minimise bias in trials and facilitate evidence synthesis. Delphi surveys are increasingly being used as part of a wider process to reach consensus about what outcomes should be included in a COS. Qualitative research can be used to inform the development of Delphi surveys. This is an advance in the field of COS development and one which is potentially valuable; however, little guidance exists for COS developers on how best to use qualitative methods and what the challenges are. This paper aims to provide early guidance on the potential role and contribution of qualitative research in this area. We hope the ideas we present will be challenged, critiqued and built upon by others exploring the role of qualitative research in COS development. This paper draws upon the experiences of using qualitative methods in the pre-Delphi stage of the development of three different COS. Using these studies as examples, we identify some of the ways that qualitative research might contribute to COS development, the challenges in using such methods and areas where future research is required. Qualitative research can help to identify what outcomes are important to stakeholders; facilitate understanding of why some outcomes may be more important than others, determine the scope of outcomes; identify appropriate language for use in the Delphi survey and inform comparisons between stakeholder data and other sources, such as systematic reviews. Developers need to consider a number of methodological points when using qualitative research: specifically, which stakeholders to involve, how to sample participants, which data collection methods are most appropriate, how to consider outcomes with stakeholders and how to analyse these data. A number of areas for future research are identified. Qualitative research has the potential to increase the research community's confidence in COS, although this will be dependent upon using rigorous and appropriate

  11. Men who have sex with men in Great Britain: comparing methods and estimates from probability and convenience sample surveys

    OpenAIRE

    Prah, Philip; Hickson, Ford; Bonell, Chris; McDaid, Lisa M; Johnson, Anne M; Wayal, Sonali; Clifton, Soazig; Sonnenberg, Pam; Nardone, Anthony; Erens, Bob; Copas, Andrew J; Riddell, Julie; Weatherburn, Peter; Mercer, Catherine H

    2016-01-01

    Objective: To examine sociodemographic and behavioural differences between men whohave sex with men (MSM) participating in recent UK convenience surveys and a national probability sample survey.\\ud Methods: We compared 148 MSM aged 18–64 years interviewed for Britain's third National Survey of Sexual Attitudes and Lifestyles (Natsal-3) undertaken in 2010–2012, with men inthe same age range participating in contemporaneous convenience surveys of MSM: 15 500 British resident men in the European...

  12. Pairing field methods to improve inference in wildlife surveys while accommodating detection covariance.

    Science.gov (United States)

    Clare, John; McKinney, Shawn T; DePue, John E; Loftin, Cynthia S

    2017-10-01

    It is common to use multiple field sampling methods when implementing wildlife surveys to compare method efficacy or cost efficiency, integrate distinct pieces of information provided by separate methods, or evaluate method-specific biases and misclassification error. Existing models that combine information from multiple field methods or sampling devices permit rigorous comparison of method-specific detection parameters, enable estimation of additional parameters such as false-positive detection probability, and improve occurrence or abundance estimates, but with the assumption that the separate sampling methods produce detections independently of one another. This assumption is tenuous if methods are paired or deployed in close proximity simultaneously, a common practice that reduces the additional effort required to implement multiple methods and reduces the risk that differences between method-specific detection parameters are confounded by other environmental factors. We develop occupancy and spatial capture-recapture models that permit covariance between the detections produced by different methods, use simulation to compare estimator performance of the new models to models assuming independence, and provide an empirical application based on American marten (Martes americana) surveys using paired remote cameras, hair catches, and snow tracking. Simulation results indicate existing models that assume that methods independently detect organisms produce biased parameter estimates and substantially understate estimate uncertainty when this assumption is violated, while our reformulated models are robust to either methodological independence or covariance. Empirical results suggested that remote cameras and snow tracking had comparable probability of detecting present martens, but that snow tracking also produced false-positive marten detections that could potentially substantially bias distribution estimates if not corrected for. Remote cameras detected marten

  13. Proceedings: The Appendix 'K' relief workshop

    International Nuclear Information System (INIS)

    1989-11-01

    The licensing and operation of commercial LWRs were impacted significantly when Appendix 'K' requirements for loss-of-coolant accident (LOCA) and emergency core cooling systems (ECCS) analyses were implemented in 1974. The Appendix K requirements included both criteria and mandatory assumptions for LOCA analysis. Plants must meet these criteria, using analysis methods that have included very conservative assumptions, such as estimating decay heat energy as 20% greater than the 1971 American Nuclear Society standard. Additional constraints were placed on the application of specific models and correlations. The Appendix K requirements had a significant impact on licensing, analysis, fuel design, reload management, plant operation, and some supporting equipment. The overall impact of Appendix K could be translated into increased costs of millions of dollars per year to utilities. The Appendix 'K' Relief Workshop provided an improved understanding of the trade-offs -- both benefits and efforts required -- inherent in continuing to use existing analysis methods or adopting BE analysis under revised NRC rule. A range of options is available to each utility. The workshop explored options and benefits to the utility industry from LOCA/ECCS rule change. A forum for complete and open discussion of the issues germaine to the question of BE methodology versus existing methodology in view of LOCA/ECCS rule changes was incorporated. Both regulatory and utility perspectives on the implementation of proposed changes were discussed. Existing and planned efforts in developing and implementing BE uncertainty methodologies for plant-licensing application have been included. The individual papers have been cataloged separately

  14. Modeling of normal contact of elastic bodies with surface relief taken into account

    Science.gov (United States)

    Goryacheva, I. G.; Tsukanov, I. Yu

    2018-04-01

    An approach to account the surface relief in normal contact problems for rough bodies on the basis of an additional displacement function for asperities is considered. The method and analytic expressions for calculating the additional displacement function for one-scale and two-scale wavy relief are presented. The influence of the microrelief geometric parameters, including the number of scales and asperities density, on additional displacements of the rough layer is analyzed.

  15. Methods and representativeness of a European survey in children and adolescents: the KIDSCREEN study

    Directory of Open Access Journals (Sweden)

    von Rueden Ursula

    2007-07-01

    Full Text Available Abstract Background The objective of the present study was to compare three different sampling and questionnaire administration methods used in the international KIDSCREEN study in terms of participation, response rates, and external validity. Methods Children and adolescents aged 8–18 years were surveyed in 13 European countries using either telephone sampling and mail administration, random sampling of school listings followed by classroom or mail administration, or multistage random sampling of communities and households with self-administration of the survey materials at home. Cooperation, completion, and response rates were compared across countries and survey methods. Data on non-respondents was collected in 8 countries. The population fraction (PF, respondents in each sex-age, or educational level category, divided by the population in the same category from Eurostat census data and population fraction ratio (PFR, ratio of PF and their corresponding 95% confidence intervals were used to analyze differences by country between the KIDSCREEN samples and a reference Eurostat population. Results Response rates by country ranged from 18.9% to 91.2%. Response rates were highest in the school-based surveys (69.0%–91.2%. Sample proportions by age and gender were similar to the reference Eurostat population in most countries, although boys and adolescents were slightly underrepresented (PFR Conclusion School-based sampling achieved the highest overall response rates but also produced slightly more biased samples than the other methods. The results suggest that the samples were sufficiently representative to provide reference population values for the KIDSCREEN instrument.

  16. Survey VS audit by using method 2 to dedicate commercial grade services

    International Nuclear Information System (INIS)

    Martinez ayucar, F. J.

    2014-01-01

    Since the start of the commercial grade dedications, both 10CFR21 and EPRI documents, plus the dedication of commercial grade components, and the stage of commercial grade dedication of the services contemplated. And recently the NRC through various communications and answers trafficking among other issues the commercial grade dedication service. The NRC has detected repeatedly incorrect application of the survey as a method of commercial grade dedication and instead has done an audit of the program elements of commercial quality. (Author)

  17. Catalytic Enzyme-Based Methods for Water Treatment and Water Distribution System Decontamination. 1. Literature Survey

    Science.gov (United States)

    2006-06-01

    best examples of this is glucose isomerase, which has been used in the commercial production of high fructose corn syrup (HFCS) since 1967.230 Most...EDGEWOOD CHEMICAL BIOLOGICAL CENTER U.S. ARMY RESEARCH, DEVELOPMENT AND ENGINEERING COMMAND ECBC-TR-489 CATALYTIC ENZYME-BASED METHODS FOR WATER ...TREATMENT AND WATER DISTRIBUTION SYSTEM DECONTAMINATION 1. LITERATURE SURVEY Joseph J. DeFrank RESEARCH AND TECHNOLOGY DIRECTORATE June 2006 Approved for

  18. Application of multivariate statistical methods in analyzing expectation surveys in Central Bank of Nigeria

    OpenAIRE

    Raymond, Ogbuka Obinna

    2017-01-01

    In analyzing survey data, most researchers and analysts make use of statistical methods with straight forward statistical approaches. More common, is the use of one‐way, two‐way or multi‐way tables, and graphical displays such as bar charts, line charts, etc. A brief overview of these approaches and a good discussion on aspects needing attention during the data analysis process can be found in Wilson & Stern (2001). In most cases however, analysis procedures that go beyond simp...

  19. Glovebox pressure relief and check valve

    International Nuclear Information System (INIS)

    Blaedel, K.L.

    1986-01-01

    This device is a combined pressure relief valve and check valve providing overpressure protection and preventing back flow into an inert atmosphere enclosure. The pressure relief is embodied by a submerged vent line in a mercury reservior, the releif pressure being a function of the submerged depth. The pressure relief can be vented into an exhaust system and the relieving pressure is only slightly influenced by the varying pressure in the exhaust system. The check valve is embodied by a ball which floats on the mercury column and contacts a seat whenever vacuum exists within the glovebox enclosure. Alternatively, the check valve is embodied by a vertical column of mercury, the maximum back pressure being a function of the height of the column of mercury

  20. Glovebox pressure relief and check valve

    Energy Technology Data Exchange (ETDEWEB)

    Blaedel, K.L.

    1986-03-17

    This device is a combined pressure relief valve and check valve providing overpressure protection and preventing back flow into an inert atmosphere enclosure. The pressure relief is embodied by a submerged vent line in a mercury reservior, the releif pressure being a function of the submerged depth. The pressure relief can be vented into an exhaust system and the relieving pressure is only slightly influenced by the varying pressure in the exhaust system. The check valve is embodied by a ball which floats on the mercury column and contacts a seat whenever vacuum exists within the glovebox enclosure. Alternatively, the check valve is embodied by a vertical column of mercury, the maximum back pressure being a function of the height of the column of mercury.

  1. Photometric calibration of the COMBO-17 survey with the Softassign Procrustes Matching method

    Science.gov (United States)

    Sheikhbahaee, Z.; Nakajima, R.; Erben, T.; Schneider, P.; Hildebrandt, H.; Becker, A. C.

    2017-11-01

    Accurate photometric calibration of optical data is crucial for photometric redshift estimation. We present the Softassign Procrustes Matching (SPM) method to improve the colour calibration upon the commonly used Stellar Locus Regression (SLR) method for the COMBO-17 survey. Our colour calibration approach can be categorised as a point-set matching method, which is frequently used in medical imaging and pattern recognition. We attain a photometric redshift precision Δz/(1 + zs) of better than 2 per cent. Our method is based on aligning the stellar locus of the uncalibrated stars to that of a spectroscopic sample of the Sloan Digital Sky Survey standard stars. We achieve our goal by finding a correspondence matrix between the two point-sets and applying the matrix to estimate the appropriate translations in multidimensional colour space. The SPM method is able to find the translation between two point-sets, despite the existence of noise and incompleteness of the common structures in the sets, as long as there is a distinct structure in at least one of the colour-colour pairs. We demonstrate the precision of our colour calibration method with a mock catalogue. The SPM colour calibration code is publicly available at https://neuronphysics@bitbucket.org/neuronphysics/spm.git.

  2. Using mark-recapture distance sampling methods on line transect surveys

    Science.gov (United States)

    Burt, Louise M.; Borchers, David L.; Jenkins, Kurt J.; Marques, Tigao A

    2014-01-01

    Mark–recapture distance sampling (MRDS) methods are widely used for density and abundance estimation when the conventional DS assumption of certain detection at distance zero fails, as they allow detection at distance zero to be estimated and incorporated into the overall probability of detection to better estimate density and abundance. However, incorporating MR data in DS models raises survey and analysis issues not present in conventional DS. Conversely, incorporating DS assumptions in MR models raises issues not present in conventional MR. As a result, being familiar with either conventional DS methods or conventional MR methods does not on its own put practitioners in good a position to apply MRDS methods appropriately. This study explains the sometimes subtly different varieties of MRDS survey methods and the associated concepts underlying MRDS models. This is done as far as possible without giving mathematical details – in the hope that this will make the key concepts underlying the methods accessible to a wider audience than if we were to present the concepts via equations.

  3. U.S. Geological Survey experience with the residual absolutes method

    Directory of Open Access Journals (Sweden)

    E. W. Worthington

    2017-10-01

    Full Text Available The U.S. Geological Survey (USGS Geomagnetism Program has developed and tested the residual method of absolutes, with the assistance of the Danish Technical University's (DTU Geomagnetism Program. Three years of testing were performed at College Magnetic Observatory (CMO, Fairbanks, Alaska, to compare the residual method with the null method. Results show that the two methods compare very well with each other and both sets of baseline data were used to process the 2015 definitive data. The residual method will be implemented at the other USGS high-latitude geomagnetic observatories in the summer of 2017 and 2018.

  4. Assessment of distribution and abundance estimates for Mariana swiftlets (Aerodramus bartschi) via examination of survey methods

    Science.gov (United States)

    Johnson, Nathan C.; Haig, Susan M.; Mosher, Stephen M.

    2018-01-01

    We described past and present distribution and abundance data to evaluate the status of the endangered Mariana Swiftlet (Aerodramus bartschi), a little-known echolocating cave swiftlet that currently inhabits 3 of 5 formerly occupied islands in the Mariana archipelago. We then evaluated the survey methods used to attain these estimates via fieldwork carried out on an introduced population of Mariana Swiftlets on the island of O'ahu, Hawaiian Islands, to derive better methods for future surveys. We estimate the range-wide population of Mariana Swiftlets to be 5,704 individuals occurring in 15 caves on Saipan, Aguiguan, and Guam in the Marianas; and 142 individuals occupying one tunnel on O'ahu. We further confirm that swiftlets have been extirpated from Rota and Tinian and have declined on Aguiguan. Swiftlets have remained relatively stable on Guam and Saipan in recent years. Our assessment of survey methods used for Mariana Swiftlets suggests overestimates depending on the technique used. We suggest the use of night vision technology and other changes to more accurately reflect their distribution, abundance, and status.

  5. Optimal Laser Phototherapy Parameters for Pain Relief.

    Science.gov (United States)

    Kate, Rohit J; Rubatt, Sarah; Enwemeka, Chukuka S; Huddleston, Wendy E

    2018-03-27

    Studies on laser phototherapy for pain relief have used parameters that vary widely and have reported varying outcomes. The purpose of this study was to determine the optimal parameter ranges of laser phototherapy for pain relief by analyzing data aggregated from existing primary literature. Original studies were gathered from available sources and were screened to meet the pre-established inclusion criteria. The included articles were then subjected to meta-analysis using Cohen's d statistic for determining treatment effect size. From these studies, ranges of the reported parameters that always resulted into large effect sizes were determined. These optimal ranges were evaluated for their accuracy using leave-one-article-out cross-validation procedure. A total of 96 articles met the inclusion criteria for meta-analysis and yielded 232 effect sizes. The average effect size was highly significant: d = +1.36 (confidence interval [95% CI] = 1.04-1.68). Among all the parameters, total energy was found to have the greatest effect on pain relief and had the most prominent optimal ranges of 120-162 and 15.36-20.16 J, which always resulted in large effect sizes. The cross-validation accuracy of the optimal ranges for total energy was 68.57% (95% CI = 53.19-83.97). Fewer and less-prominent optimal ranges were obtained for the energy density and duration parameters. None of the remaining parameters was found to be independently related to pain relief outcomes. The findings of meta-analysis indicate that laser phototherapy is highly effective for pain relief. Based on the analysis of parameters, total energy can be optimized to yield the largest effect on pain relief.

  6. Survey of engineering computational methods and experimental programs for estimating supersonic missile aerodynamic characteristics

    Science.gov (United States)

    Sawyer, W. C.; Allen, J. M.; Hernandez, G.; Dillenius, M. F. E.; Hemsch, M. J.

    1982-01-01

    This paper presents a survey of engineering computational methods and experimental programs used for estimating the aerodynamic characteristics of missile configurations. Emphasis is placed on those methods which are suitable for preliminary design of conventional and advanced concepts. An analysis of the technical approaches of the various methods is made in order to assess their suitability to estimate longitudinal and/or lateral-directional characteristics for different classes of missile configurations. Some comparisons between the predicted characteristics and experimental data are presented. These comparisons are made for a large variation in flow conditions and model attitude parameters. The paper also presents known experimental research programs developed for the specific purpose of validating analytical methods and extending the capability of data-base programs.

  7. A Survey of Rabbit Handling Methods Within the United Kingdom and the Republic of Ireland.

    Science.gov (United States)

    Oxley, James Andrew; Ellis, Clare Frances; McBride, E Anne; McCormick, Wanda Denise

    2018-04-25

    Rabbits are commonly kept in a variety of settings, including homes, laboratories, and veterinary clinics. Despite the popularity of keeping this prey species, little research has investigated current methods of handling. The aim of this study was to examine the experience of caregivers (owners and keepers) in using five handling methods commonly referred to in books written for companion animal (pet) owners and veterinary and/or laboratory personnel. An online survey was completed by 2644 respondents, representing all three of these groups, and breeders. Data were acquired to determine sources that participants used to gain knowledge of different handling methods, the methods they used and for what purposes they used them, and their perceptions of any associated difficulties or welfare concerns. Results indicated that participants most frequently used the method of supporting a rabbit's body against a person's chest, which was considered the easiest and most welfare-friendly method of the handling methods explored. "Scruffing with rear support" was the least used method and was considered to be distressing and painful for the rabbit. As rabbits are a terrestrial prey species, being picked up is likely an innately stressful experience. Additional research is encouraged to explore the experience of rabbits during handling to identify methods that can be easily used with the fewest welfare compromises.

  8. 24 CFR 965.508 - Individual relief.

    Science.gov (United States)

    2010-04-01

    ... 24 Housing and Urban Development 4 2010-04-01 2010-04-01 false Individual relief. 965.508 Section 965.508 Housing and Urban Development Regulations Relating to Housing and Urban Development (Continued... PHA-OWNED OR LEASED PROJECTS-GENERAL PROVISIONS Resident Allowances for Utilities § 965.508 Individual...

  9. Emergency networking: famine relief in ant colonies

    NARCIS (Netherlands)

    Sendova-Franks, A.B.; Hayward, R.; Wulf, B.; Klimek, T.; James, R.; Planque, R.; Britton, N.F.; Franks, N.R.

    2009-01-01

    Resource distribution is fundamental to social organization, but it poses a dilemma. How to facilitate the spread of useful resources but restrict harmful substances? This dilemma reaches a zenith in famine relief. Survival depends on distributing food fast but that could increase vulnerability to

  10. 32 CFR 516.19 - Injunctive relief.

    Science.gov (United States)

    2010-07-01

    ... Defense Department of Defense (Continued) DEPARTMENT OF THE ARMY AID OF CIVIL AUTHORITIES AND PUBLIC RELATIONS LITIGATION Reporting Legal Proceedings to HQDA § 516.19 Injunctive relief. (a) General. Plaintiffs...). Because these actions can quickly impede military functions, immediate and decisive action must be taken...

  11. 78 FR 19136 - Emergency Relief Program

    Science.gov (United States)

    2013-03-29

    ... issuing this interim final rule in order to comply with the Disaster Relief Appropriations Act of 2013... FTA-2013-0004. All electronic submissions must be made to the U.S. Government electronic site at http... operating costs in the event of a catastrophic event, such as a natural disaster, that affects a wide area...

  12. Indications and organisational methods for autologous blood transfusion procedures in Italy: results of a national survey.

    Science.gov (United States)

    Catalano, Liviana; Campolongo, Alessandra; Caponera, Maurizio; Berzuini, Alessandra; Bontadini, Andrea; Furlò, Giuseppe; Pasqualetti, Patrizio; Liumbruno, Giancarlo M

    2014-10-01

    Pre-operative donation of autologous blood is a practice that is now being abandoned. Alternative methods of transfusing autologous blood, other than predeposited blood, do however play a role in limiting the need for transfusion of allogeneic blood. This survey of autologous blood transfusion practices, promoted by the Italian Society of Transfusion Medicine and Immunohaematology more than 2 years after the publication of national recommendations on the subject, was intended to acquire information on the indications for predeposit in Italy and on some organisational aspects of the alternative techniques of autotransfusion. A structured questionnaire consisting of 22 questions on the indications and organisational methods of autologous blood transfusion was made available on a web platform from 15 January to 15 March, 2013. The 232 Transfusion Services in Italy were invited by e-mail to complete the online survey. Of the 232 transfusion structures contacted, 160 (69%) responded to the survey, with the response rate decreasing from the North towards the South and the Islands. The use of predeposit has decreased considerably in Italy and about 50% of the units collected are discarded because of lack of use. Alternative techniques (acute isovolaemic haemodilution and peri-operative blood salvage) are used at different frequencies across the country. The data collected in this survey can be considered representative of national practice; they show that the already very limited indications for predeposit autologous blood transfusion must be adhered to even more scrupulously, also to avoid the notable waste of resources due to unused units.Users of alternative autotransfusion techniques must be involved in order to gain a full picture of the degree of use of such techniques; multidisciplinary agreement on the indications for their use is essential in order for these indications to have an effective role in "patient blood management" programmes.

  13. THE BOLOCAM GALACTIC PLANE SURVEY. VIII. A MID-INFRARED KINEMATIC DISTANCE DISCRIMINATION METHOD

    Energy Technology Data Exchange (ETDEWEB)

    Ellsworth-Bowers, Timothy P.; Glenn, Jason; Battersby, Cara; Ginsburg, Adam; Bally, John [CASA, University of Colorado, UCB 389, University of Colorado, Boulder, CO 80309 (United States); Rosolowsky, Erik [Department of Physics and Astronomy, University of British Columbia Okanagan, 3333 University Way, Kelowna, BC V1V 1V7 (Canada); Mairs, Steven [Department of Physics and Astronomy, University of Victoria, 3800 Finnerty Road, Victoria, BC V8P 1A1 (Canada); Evans, Neal J. II [Department of Astronomy, University of Texas, 1 University Station C1400, Austin, TX 78712 (United States); Shirley, Yancy L., E-mail: timothy.ellsworthbowers@colorado.edu [Steward Observatory, University of Arizona, 933 North Cherry Avenue, Tucson, AZ 85721 (United States)

    2013-06-10

    We present a new distance estimation method for dust-continuum-identified molecular cloud clumps. Recent (sub-)millimeter Galactic plane surveys have cataloged tens of thousands of these objects, plausible precursors to stellar clusters, but detailed study of their physical properties requires robust distance determinations. We derive Bayesian distance probability density functions (DPDFs) for 770 objects from the Bolocam Galactic Plane Survey in the Galactic longitude range 7. Degree-Sign 5 {<=} l {<=} 65 Degree-Sign . The DPDF formalism is based on kinematic distances, and uses any number of external data sets to place prior distance probabilities to resolve the kinematic distance ambiguity (KDA) for objects in the inner Galaxy. We present here priors related to the mid-infrared absorption of dust in dense molecular regions and the distribution of molecular gas in the Galactic disk. By assuming a numerical model of Galactic mid-infrared emission and simple radiative transfer, we match the morphology of (sub-)millimeter thermal dust emission with mid-infrared absorption to compute a prior DPDF for distance discrimination. Selecting objects first from (sub-)millimeter source catalogs avoids a bias towards the darkest infrared dark clouds (IRDCs) and extends the range of heliocentric distance probed by mid-infrared extinction and includes lower-contrast sources. We derive well-constrained KDA resolutions for 618 molecular cloud clumps, with approximately 15% placed at or beyond the tangent distance. Objects with mid-infrared contrast sufficient to be cataloged as IRDCs are generally placed at the near kinematic distance. Distance comparisons with Galactic Ring Survey KDA resolutions yield a 92% agreement. A face-on view of the Milky Way using resolved distances reveals sections of the Sagittarius and Scutum-Centaurus Arms. This KDA-resolution method for large catalogs of sources through the combination of (sub-)millimeter and mid-infrared observations of molecular

  14. KNOWLEDGE, ATTITUDE AND USE OF PAIN RELIEF IN LABOUR AMONG WOMEN ATTENDING ANTE-NATAL CLINIC AT SHALOM COMMUNITY HOSPITAL, ATHI RIVER.

    Science.gov (United States)

    Njiru, J N; Esiromo, M A; Omari, H O

    2014-07-01

    To find out the knowledge, attitude and practice of pain relief methods during labour among mothers attending antenatal clinics at Shalom Community Hospital, Athi River, Kenya. Cross Sectional study. Shalom Community Hospital, Athi River, Kenya. Two hundred and seven participants attending antenatal clinics at the facility were recruited. The median age of the participants was 28 years and a median parity of one. Most of the study participants, 89.4%, were not aware of any pain relief method during labour. Among the 10.6% patients that were of a pain relief method, 54% had gotten the knowledge from the doctors. All the patients had experienced pain in labour with 72% rating the pain as severe pain. Only 37% of the patients were offered a pain relief method and the intramuscular injectable was offered to all. Majority (88%) of those offered a form of pain relief rated the pain relief method as ineffective. A majority of the women 93% would use a pain relief method in the next labour with epidural method being the most preferred method. The level of knowledge of pain relief methods among mothers islow. There is need to integrate information on pain relief options in labour as part of antenatal services offered routinely. Epidural analgesia services should be enhanced.

  15. Mobile acoustic transects miss rare bat species: implications of survey method and spatio-temporal sampling for monitoring bats

    Directory of Open Access Journals (Sweden)

    Elizabeth C. Braun de Torrez

    2017-11-01

    Full Text Available Due to increasing threats facing bats, long-term monitoring protocols are needed to inform conservation strategies. Effective monitoring should be easily repeatable while capturing spatio-temporal variation. Mobile acoustic driving transect surveys (‘mobile transects’ have been touted as a robust, cost-effective method to monitor bats; however, it is not clear how well mobile transects represent dynamic bat communities, especially when used as the sole survey approach. To assist biologists who must select a single survey method due to resource limitations, we assessed the effectiveness of three acoustic survey methods at detecting species richness in a vast protected area (Everglades National Park: (1 mobile transects, (2 stationary surveys that were strategically located by sources of open water and (3 stationary surveys that were replicated spatially across the landscape. We found that mobile transects underrepresented bat species richness compared to stationary surveys across all major vegetation communities and in two distinct seasons (dry/cool and wet/warm. Most critically, mobile transects failed to detect three rare bat species, one of which is federally endangered. Spatially replicated stationary surveys did not estimate higher species richness than strategically located stationary surveys, but increased the rate at which species were detected in one vegetation community. The survey strategy that detected maximum species richness and the highest mean nightly species richness with minimal effort was a strategically located stationary detector in each of two major vegetation communities during the wet/warm season.

  16. Mobile acoustic transects miss rare bat species: implications of survey method and spatio-temporal sampling for monitoring bats.

    Science.gov (United States)

    Braun de Torrez, Elizabeth C; Wallrichs, Megan A; Ober, Holly K; McCleery, Robert A

    2017-01-01

    Due to increasing threats facing bats, long-term monitoring protocols are needed to inform conservation strategies. Effective monitoring should be easily repeatable while capturing spatio-temporal variation. Mobile acoustic driving transect surveys ('mobile transects') have been touted as a robust, cost-effective method to monitor bats; however, it is not clear how well mobile transects represent dynamic bat communities, especially when used as the sole survey approach. To assist biologists who must select a single survey method due to resource limitations, we assessed the effectiveness of three acoustic survey methods at detecting species richness in a vast protected area (Everglades National Park): (1) mobile transects, (2) stationary surveys that were strategically located by sources of open water and (3) stationary surveys that were replicated spatially across the landscape. We found that mobile transects underrepresented bat species richness compared to stationary surveys across all major vegetation communities and in two distinct seasons (dry/cool and wet/warm). Most critically, mobile transects failed to detect three rare bat species, one of which is federally endangered. Spatially replicated stationary surveys did not estimate higher species richness than strategically located stationary surveys, but increased the rate at which species were detected in one vegetation community. The survey strategy that detected maximum species richness and the highest mean nightly species richness with minimal effort was a strategically located stationary detector in each of two major vegetation communities during the wet/warm season.

  17. Attitudes of farmers and veterinarians towards pain and the use of pain relief in pigs.

    Science.gov (United States)

    Ison, S H; Rutherford, K M D

    2014-12-01

    A survey of UK-based pig farmers and veterinarians was conducted, in order to investigate attitudes to pain and the use of pain relief in pigs. Survey respondents were asked to indicate which anti-inflammatory drugs they used or prescribed for pigs, how often these were administered, and the level of pain they associated with particular conditions. The survey found that veterinarians used a range of anti-inflammatory products to treat pigs with lameness. While both farmers and veterinarians gave similar pain scores overall, farmers rated gastrointestinal disease as more painful and conversely veterinarians scored lameness higher. Female and younger respondents gave higher pain scores than males and older respondents. Overall, farmers and veterinarians had a positive attitude towards pain relief in pigs with the majority agreeing that animals recovered more promptly when pain relief was administered. Most farmers agreed that the recognition and management of pain is an important part of pig husbandry, and many expressed an interest in finding out more about identifying pain in this species as well as the treatment options available. The study highlighted potential barriers to the increased application of pain relief in pigs in that almost one-third of veterinarians and two-thirds of farmers did not agree that they discussed pain management with each other, while other respondents indicated that they found it difficult to recognise pain in pigs, and did not know how to treat it appropriately. Copyright © 2014 Elsevier Ltd. All rights reserved.

  18. Application of QMC methods to PDEs with random coefficients : a survey of analysis and implementation

    KAUST Repository

    Kuo, Frances

    2016-01-05

    In this talk I will provide a survey of recent research efforts on the application of quasi-Monte Carlo (QMC) methods to PDEs with random coefficients. Such PDE problems occur in the area of uncertainty quantification. In recent years many papers have been written on this topic using a variety of methods. QMC methods are relatively new to this application area. I will consider different models for the randomness (uniform versus lognormal) and contrast different QMC algorithms (single-level versus multilevel, first order versus higher order, deterministic versus randomized). I will give a summary of the QMC error analysis and proof techniques in a unified view, and provide a practical guide to the software for constructing QMC points tailored to the PDE problems.

  19. Comparison of self-administered survey questionnaire responses collected using mobile apps versus other methods.

    Science.gov (United States)

    Marcano Belisario, José S; Jamsek, Jan; Huckvale, Kit; O'Donoghue, John; Morrison, Cecily P; Car, Josip

    2015-07-27

    Self-administered survey questionnaires are an important data collection tool in clinical practice, public health research and epidemiology. They are ideal for achieving a wide geographic coverage of the target population, dealing with sensitive topics and are less resource-intensive than other data collection methods. These survey questionnaires can be delivered electronically, which can maximise the scalability and speed of data collection while reducing cost. In recent years, the use of apps running on consumer smart devices (i.e., smartphones and tablets) for this purpose has received considerable attention. However, variation in the mode of delivering a survey questionnaire could affect the quality of the responses collected. To assess the impact that smartphone and tablet apps as a delivery mode have on the quality of survey questionnaire responses compared to any other alternative delivery mode: paper, laptop computer, tablet computer (manufactured before 2007), short message service (SMS) and plastic objects. We searched MEDLINE, EMBASE, PsycINFO, IEEEXplore, Web of Science, CABI: CAB Abstracts, Current Contents Connect, ACM Digital, ERIC, Sociological Abstracts, Health Management Information Consortium, the Campbell Library and CENTRAL. We also searched registers of current and ongoing clinical trials such as ClinicalTrials.gov and the World Health Organization (WHO) International Clinical Trials Registry Platform. We also searched the grey literature in OpenGrey, Mobile Active and ProQuest Dissertation & Theses. Lastly, we searched Google Scholar and the reference lists of included studies and relevant systematic reviews. We performed all searches up to 12 and 13 April 2015. We included parallel randomised controlled trials (RCTs), crossover trials and paired repeated measures studies that compared the electronic delivery of self-administered survey questionnaires via a smartphone or tablet app with any other delivery mode. We included data obtained from

  20. Submarine tectonic relief off Enshunada. Enshunadaoki no hendo chikei

    Energy Technology Data Exchange (ETDEWEB)

    Iwabuchi, Y; Sasahara, N; Hamamoto, F [Maritime Safety Agency, Tokyo (Japan); Yoshioka, S [10th Resional Maritime Safety Headquarters, Kagoshima (Japan); Kondo, T [Maritime Safety School, Kyoto (Japan)

    1991-08-15

    This paper reports on the results of investigations on the submarine relief structure off the Enshunada (a sea area which is on the south of the Tenryu River mouth and has about 50km east and west and about 100km north and south) using a bathymetric surveying ship equipped with a narrow multibeam echo sounder. The submarine relief structure of this sea area is clarified into the following topographical districts arranged north to south (each extends roughly in the northeast-southwest direction): the Enshu trough and Tenryu submarine canyon upper valley located in the center thereof, ridges represented by No.l and No.2 Tenryu knolls, the ridge and trough zone where minor ridges and troughes appear complicatedly and repeatedly, and the Nankai trough. The paper contains causes of formation of the Tenryu submarine canyon, the Ryuyo submarine canyon which is located in the northwestern slope of No.2 Tenryu knoll and has a distinct shape, oval-shaped domes scattered in the bottom of Nankai trough, etc. and also opinions on landslide topography seen in the ridge and trough zone. 13 refs., 5 figs., 1 tab.

  1. Methods for rapidly processing angular masks of next-generation galaxy surveys

    Science.gov (United States)

    Swanson, M. E. C.; Tegmark, Max; Hamilton, Andrew J. S.; Hill, J. Colin

    2008-07-01

    As galaxy surveys become larger and more complex, keeping track of the completeness, magnitude limit and other survey parameters as a function of direction on the sky becomes an increasingly challenging computational task. For example, typical angular masks of the Sloan Digital Sky Survey contain about N = 300000 distinct spherical polygons. Managing masks with such large numbers of polygons becomes intractably slow, particularly for tasks that run in time with a naive algorithm, such as finding which polygons overlap each other. Here we present a `divide-and-conquer' solution to this challenge: we first split the angular mask into pre-defined regions called `pixels', such that each polygon is in only one pixel, and then perform further computations, such as checking for overlap, on the polygons within each pixel separately. This reduces tasks to , and also reduces the important task of determining in which polygon(s) a point on the sky lies from to , resulting in significant computational speedup. Additionally, we present a method to efficiently convert any angular mask to and from the popular HEALPIX format. This method can be generically applied to convert to and from any desired spherical pixelization. We have implemented these techniques in a new version of the MANGLE software package, which is freely available at http://space.mit.edu/home/tegmark/mangle/, along with complete documentation and example applications. These new methods should prove quite useful to the astronomical community, and since MANGLE is a generic tool for managing angular masks on a sphere, it has the potential to benefit terrestrial mapmaking applications as well.

  2. Survey and analysis of deep water mineral deposits using nuclear methods

    International Nuclear Information System (INIS)

    Staehle, C.M.; Noakes, J.E.; Spaulding, J.

    1991-01-01

    Present knowledge of the location, quality, quantity and recoverability of sea floor minerals is severely limited, particularly in the abyssal depths and deep water within the 200 mile Exclusion Economic Zone (EEZ) surrounding the U.S. Pacific Islands. To improve this understanding and permit exploitation of these mineral reserves much additional data is needed. This paper will discuss a sponsored program for extending existing proven nuclear survey methods currently used on the shallow continental margins of the Atlantic and Gulf of Mexico into the deeper waters of the Pacific. This nuclear technology can be readily integrated and extended to depths of 2000 m using the existing RCV-150 remotely operated vehicle (ROV) and the PISCESE V manned deep submersible vehicle (DSV) operated by The University of Hawaii's, Hawaii Underseas Research Laboratory (HURL). Previous papers by the authors have also proposed incorporating these nuclear analytical methods for survey of the deep ocean through the use of Autonomous Underwater Vehicle (AUX). Such a vehicle could extend the use of passive nuclear instrument operation, in addition to conventional analytical methods, into the abyssal depths and do so with speed and economy not otherwise possible. The natural radioactivity associated with manganese nodules and crustal deposits is sufficiently above normal background levels to allow discrimination and quantification in near real time

  3. Methods of practice and guidelines for using survey-grade global navigation satellite systems (GNSS) to establish vertical datum in the United States Geological Survey

    Science.gov (United States)

    Rydlund, Jr., Paul H.; Densmore, Brenda K.

    2012-01-01

    Geodetic surveys have evolved through the years to the use of survey-grade (centimeter level) global positioning to perpetuate and post-process vertical datum. The U.S. Geological Survey (USGS) uses Global Navigation Satellite Systems (GNSS) technology to monitor natural hazards, ensure geospatial control for climate and land use change, and gather data necessary for investigative studies related to water, the environment, energy, and ecosystems. Vertical datum is fundamental to a variety of these integrated earth sciences. Essentially GNSS surveys provide a three-dimensional position x, y, and z as a function of the North American Datum of 1983 ellipsoid and the most current hybrid geoid model. A GNSS survey may be approached with post-processed positioning for static observations related to a single point or network, or involve real-time corrections to provide positioning "on-the-fly." Field equipment required to facilitate GNSS surveys range from a single receiver, with a power source for static positioning, to an additional receiver or network communicated by radio or cellular for real-time positioning. A real-time approach in its most common form may be described as a roving receiver augmented by a single-base station receiver, known as a single-base real-time (RT) survey. More efficient real-time methods involving a Real-Time Network (RTN) permit the use of only one roving receiver that is augmented to a network of fixed receivers commonly known as Continually Operating Reference Stations (CORS). A post-processed approach in its most common form involves static data collection at a single point. Data are most commonly post-processed through a universally accepted utility maintained by the National Geodetic Survey (NGS), known as the Online Position User Service (OPUS). More complex post-processed methods involve static observations among a network of additional receivers collecting static data at known benchmarks. Both classifications provide users

  4. Survey of the status of finite element methods for partial differential equations

    Science.gov (United States)

    Temam, Roger

    1986-01-01

    The finite element methods (FEM) have proved to be a powerful technique for the solution of boundary value problems associated with partial differential equations of either elliptic, parabolic, or hyperbolic type. They also have a good potential for utilization on parallel computers particularly in relation to the concept of domain decomposition. This report is intended as an introduction to the FEM for the nonspecialist. It contains a survey which is totally nonexhaustive, and it also contains as an illustration, a report on some new results concerning two specific applications, namely a free boundary fluid-structure interaction problem and the Euler equations for inviscid flows.

  5. Application of iterative method with dynamic weight based on observation equation's constant in NPP's surveying

    International Nuclear Information System (INIS)

    Chen Benfu; Guo Xianchun; Zou Zili

    2009-01-01

    It' s useful to identify the data with errors from the large number of observations during the process of adjustment to decrease the influence of the errors and to improve the quality of the final surveying result. Based on practical conditions of the nuclear power plant's plain control network, it has been given on how to simply calculate the threshold value which used to pre-weight each datum before adjustment calculation; it shows some superiorities in efficiency on data snooping and in quality of the final calculation compared with some traditional methods such as robust estimation, which process data with dynamic weight based the observation' s correction after each iteration. (authors)

  6. A survey of modelling methods for high-fidelity wind farm simulations using large eddy simulation

    DEFF Research Database (Denmark)

    Breton, Simon-Philippe; Sumner, J.; Sørensen, Jens Nørkær

    2017-01-01

    surveys the most common schemes available to model the rotor, atmospheric conditions and terrain effects within current state-of-the-art LES codes, of which an overview is provided. A summary of the experimental research data available for validation of LES codes within the context of single and multiple......Large eddy simulations (LES) of wind farms have the capability to provide valuable and detailed information about the dynamics of wind turbine wakes. For this reason, their use within the wind energy research community is on the rise, spurring the development of new models and methods. This review...

  7. Survey of artificial intelligence methods for detection and identification of component faults in nuclear power plants

    International Nuclear Information System (INIS)

    Reifman, J.

    1997-01-01

    A comprehensive survey of computer-based systems that apply artificial intelligence methods to detect and identify component faults in nuclear power plants is presented. Classification criteria are established that categorize artificial intelligence diagnostic systems according to the types of computing approaches used (e.g., computing tools, computer languages, and shell and simulation programs), the types of methodologies employed (e.g., types of knowledge, reasoning and inference mechanisms, and diagnostic approach), and the scope of the system. The major issues of process diagnostics and computer-based diagnostic systems are identified and cross-correlated with the various categories used for classification. Ninety-five publications are reviewed

  8. Men who have sex with men in Great Britain: comparing methods and estimates from probability and convenience sample surveys

    Science.gov (United States)

    Prah, Philip; Hickson, Ford; Bonell, Chris; McDaid, Lisa M; Johnson, Anne M; Wayal, Sonali; Clifton, Soazig; Sonnenberg, Pam; Nardone, Anthony; Erens, Bob; Copas, Andrew J; Riddell, Julie; Weatherburn, Peter; Mercer, Catherine H

    2016-01-01

    Objective To examine sociodemographic and behavioural differences between men who have sex with men (MSM) participating in recent UK convenience surveys and a national probability sample survey. Methods We compared 148 MSM aged 18–64 years interviewed for Britain's third National Survey of Sexual Attitudes and Lifestyles (Natsal-3) undertaken in 2010–2012, with men in the same age range participating in contemporaneous convenience surveys of MSM: 15 500 British resident men in the European MSM Internet Survey (EMIS); 797 in the London Gay Men's Sexual Health Survey; and 1234 in Scotland's Gay Men's Sexual Health Survey. Analyses compared men reporting at least one male sexual partner (past year) on similarly worded questions and multivariable analyses accounted for sociodemographic differences between the surveys. Results MSM in convenience surveys were younger and better educated than MSM in Natsal-3, and a larger proportion identified as gay (85%–95% vs 62%). Partner numbers were higher and same-sex anal sex more common in convenience surveys. Unprotected anal intercourse was more commonly reported in EMIS. Compared with Natsal-3, MSM in convenience surveys were more likely to report gonorrhoea diagnoses and HIV testing (both past year). Differences between the samples were reduced when restricting analysis to gay-identifying MSM. Conclusions National probability surveys better reflect the population of MSM but are limited by their smaller samples of MSM. Convenience surveys recruit larger samples of MSM but tend to over-represent MSM identifying as gay and reporting more sexual risk behaviours. Because both sampling strategies have strengths and weaknesses, methods are needed to triangulate data from probability and convenience surveys. PMID:26965869

  9. The former Semipalatinsk Test Site survey by field γ-spectrometry method

    International Nuclear Information System (INIS)

    Pakhomov, S.A.; Dubasov, Yu.V.; Biryukov, E.I.; Gavrilin, S.S.; Ilyin, L.I.

    2001-01-01

    Full text: Field γ-spectrometry method is the most productive method of getting an information on gamma-irradiating radionuclides contents in objects under survey. For many years the Radium Institute was the most active participant of works on radiation survey of the Semipalatinsk Test Site, field γ-spectrometry method including. In field γ-spectrometry method realization the existence of corresponding apparatus, and methodic software is supposed to be allowing to carry out both measurement, recording of γ-spectrometry energetic characteristics in field conditions and final treatment (using corresponding physical models) ensuring obtaining the information on radionuclides' contents. Different variants of such apparatus were developed and made at the Radium Institute. Under conditions of complex spectral structure and high intensity existence a portable variant of Ge(Li)-detector spectrometer fed by alkaline accumulators and allowing to record a spectrum at high load was elaborated. For walk γ-survey in common with the University two variants of portable spectrometers 'Skif-3' were elaborated: one of them with a standard scintillation detector on the base of Nal(Ti) crystal, having the size of 63x63 mm, and the other is an 'X-ray' detector of large dimension on the base of CsI crystal with a diameter of 165 mm, designated for soft gamma-irradiation registration, 241 Am including. During 8 hours of independent works 'Skif-3' is able to record into internal memory up to 100 spectra with an exposure up to 9999 s. At 10 min exposure in its sensitivity of 241 Am finding (10 Bq/kg) a spectrometer 'Skif-3' excels a portable spectrometer 'InSpector' (Canberra) working with the exposure of 1 hour. For automobile measurements a car spectrometer was elaborated fed. from car board supply and having four detectors based on NaI crystals with the dimensions 200x110 mm and total volume of about 121. For express treatment of a 'Skif-3' spectrometer scintillation spectra special

  10. Cross-continental comparison of national food consumption survey methods--a narrative review

    Science.gov (United States)

    Food consumption surveys are performed in many countries. Comparison of results from those surveys across nations is difficult because of differences in methodological approaches. While consensus about the preferred methodology associated with national food consumption surveys is increasing, no in...

  11. Analysis of residual stress relief mechanisms in post-weld heat treatment

    International Nuclear Information System (INIS)

    Dong, Pingsha; Song, Shaopin; Zhang, Jinmiao

    2014-01-01

    This paper presents a recent study on weld residual stress relief mechanisms associated with furnace-based uniform post-weld heat treatment (PWHT). Both finite element and analytical methods are used to quantitatively examine how plastic deformation and creep relaxation contribute to residual stress relief process at different stages of PWHT process. The key contribution of this work to an improved understanding of furnace based uniform PWHT can be summarized as follows: (1)Plastic deformation induced stress relief during PWHT can be analytically expressed by the change in material elastic deformation capacity (or elastic deformation limit) measured in terms of material yield strength to Young's modulus ratio, which has a rather limited role in overall residual stress relief during furnace based uniform PWHT. (2)The most dominant stress relief mechanism is creep strain induced stress relaxation, as expected. However, a rapid creep strain development accompanied by a rapid residual stress reduction during heating stage before reaching PWHT temperature is shown to contribute to most of the stress relief seen in overall PWHT process, suggesting PWHT hold time can be significantly reduced as far as residual stress relief is concerned. (3)A simple engineering scheme for estimating residual stress reduction is proposed based on this study by relating material type, PWHT temperature, and component wall thickness. - Highlights: • The paper clarified effects of plastic deformation and creep relaxation on weld residual stress relief during uniform PWHT. • Creep strain development is far more important than plastic strain, mostly completed even before hold time starts. • Plastic strain development is insignificant and be analytically described by a material elastic deformation capacity parameter. • An engineering estimation scheme is proposed for determining residual stress reduction resulted from furnace based PWHT

  12. [Disaster relief through inter-professional collaboration --from the standpoint of a dietitian].

    Science.gov (United States)

    Inamura, Yukiko

    2013-01-01

    The present study examined disaster relief efforts by registered and other dietitians following the Great East Japan Earthquake to identify related problems. Based on this, the study discussed what is required to develop a "disaster relief system through inter-professional collaboration" to cope with unanticipated disasters. On March 15, 2011, the Japan Dietetic Association (JDA) independently established the "Great East Japan Earthquake relief emergency headquarters". The association along with these volunteers was committed to the establishment of a system for disaster relief activities with the support of Iwate, Miyagi, and Fukushima Prefectures: the number of registered volunteers was 978; a total of 1,588 dietitians were dispatched; and 602 became involved in relief work in the disaster-stricken areas. Registered and other dietitians dispatched for disaster relief provided support and home care for evacuation centers, elderly facilities, and temporary housing, including dietary and nutrition advice and consultation, in cooperation and collaboration with administrative dietitians in disaster areas, registered and other dietitians of disaster headquarters in disaster-stricken prefectures, the Primary Care for All Teams (PCAT) of the Japan Primary Care Association, disaster medical assistance teams (DMATs), and volunteer groups. Through the course of the relief activities, the following problems were identified: difficulties in responding to varying needs in different phases, nutritional measures (population-based and high-risk approaches), nutritional disparities among evacuation centers, necessity of a section to collect ever-changing information on disaster areas in a comprehensive manner, importance of working cooperatively to establish a support system, and differences in volunteers' support skills. To facilitate disaster relief through inter-professional collaboration, it is necessary for many different organizations to understand each other's capabilities

  13. Computerized tablet based versus traditional paper- based survey methods: results from adolescent's health research in schools of Maharashtra, India

    OpenAIRE

    Naveen Agarwal; Balram Paswan; Prakash H. Fulpagare; Dhirendra N Sinha; Thaksaphon Thamarangsi; Manju Rani

    2018-01-01

    Background and challenges to implementation Technological advancement is growing very fast in India and majority of young population is handling electronic devices often during leisure as well as at work. This study indicates that electronic tablets are less time consuming and improves survey response rate over the traditional paper-pencil survey method. Intervention or response An Android-based Global School-based Health Survey (GSHS) questionnaire was used with the...

  14. Impact of radiotherapy on pain relief and recalcification in plasma cell neoplasms. Long-term experience

    International Nuclear Information System (INIS)

    Balducci, Mario; Chiesa, Silvia; Manfrida, Stefania

    2011-01-01

    Purpose: To evaluate the impact of radiotherapy on pain relief and on recalcification in patients with osteolytic lesions due to plasma cell neoplasm. Patients and Methods: Pain relief was evaluated according to a 0-10 verbal numerical rating scale (NRS) and recalcification was measured using radiological imaging. Results: From 1996-2007, 52 patients were treated. Median total dose was 38 Gy (range, 16-50 Gy). Pain before radiotherapy was reported by 45 of 52 (86.5%) patients as being severe (8 ≤ NRS ≤ 10) in 5 (11%), moderate (5 ≤ NRS ≤ 7) in 27 (60%), and mild in 13 (29%). Pain relief was achieved in 41 of 45 patients (91%): complete relief was obtained in 21 (51.2%) and partial relief in 20 patients (48.8%); patients with severe pain experienced resolution and none presented an increase of pain. Drugs reduction/suspension was achieved in 7 of the 21 patients with complete response. Of 42 patients evaluable for recalcification, 21 (50%) presented a radiological response, which was identified as complete in 16 (38%). Conclusion: Our data confirm the effectiveness of radiotherapy for pain relief, including a reduction in drug intake, and on recalcification, thus, supporting its use in a multidisciplinary approach. (orig.)

  15. The SAGES Legacy Unifying Globulars and Galaxies survey (SLUGGS): sample definition, methods, and initial results

    Energy Technology Data Exchange (ETDEWEB)

    Brodie, Jean P.; Romanowsky, Aaron J.; Jennings, Zachary G.; Pota, Vincenzo; Kader, Justin; Roediger, Joel C.; Villaume, Alexa; Arnold, Jacob A.; Woodley, Kristin A. [University of California Observatories, 1156 High Street, Santa Cruz, CA 95064 (United States); Strader, Jay [Department of Physics and Astronomy, Michigan State University, East Lansing, MI 48824 (United States); Forbes, Duncan A.; Pastorello, Nicola; Usher, Christopher; Blom, Christina; Kartha, Sreeja S. [Centre for Astrophysics and Supercomputing, Swinburne University, Hawthorn, VIC 3122 (Australia); Foster, Caroline; Spitler, Lee R., E-mail: jbrodie@ucsc.edu [Australian Astronomical Observatory, P.O. Box 915, North Ryde, NSW 1670 (Australia)

    2014-11-20

    We introduce and provide the scientific motivation for a wide-field photometric and spectroscopic chemodynamical survey of nearby early-type galaxies (ETGs) and their globular cluster (GC) systems. The SAGES Legacy Unifying Globulars and GalaxieS (SLUGGS) survey is being carried out primarily with Subaru/Suprime-Cam and Keck/DEIMOS. The former provides deep gri imaging over a 900 arcmin{sup 2} field-of-view to characterize GC and host galaxy colors and spatial distributions, and to identify spectroscopic targets. The NIR Ca II triplet provides GC line-of-sight velocities and metallicities out to typically ∼8 R {sub e}, and to ∼15 R {sub e} in some cases. New techniques to extract integrated stellar kinematics and metallicities to large radii (∼2-3 R {sub e}) are used in concert with GC data to create two-dimensional (2D) velocity and metallicity maps for comparison with simulations of galaxy formation. The advantages of SLUGGS compared with other, complementary, 2D-chemodynamical surveys are its superior velocity resolution, radial extent, and multiple halo tracers. We describe the sample of 25 nearby ETGs, the selection criteria for galaxies and GCs, the observing strategies, the data reduction techniques, and modeling methods. The survey observations are nearly complete and more than 30 papers have so far been published using SLUGGS data. Here we summarize some initial results, including signatures of two-phase galaxy assembly, evidence for GC metallicity bimodality, and a novel framework for the formation of extended star clusters and ultracompact dwarfs. An integrated overview of current chemodynamical constraints on GC systems points to separate, in situ formation modes at high redshifts for metal-poor and metal-rich GCs.

  16. Laser Scanning in Engineering Surveying: Methods of Measurement and Modeling of Structures

    Directory of Open Access Journals (Sweden)

    Lenda Grzegorz

    2016-06-01

    Full Text Available The study is devoted to the uses of laser scanning in the field of engineering surveying. It is currently one of the main trends of research which is developed at the Department of Engineering Surveying and Civil Engineering at the Faculty of Mining Surveying and Environmental Engineering of AGH University of Science and Technology in Krakow. They mainly relate to the issues associated with tower and shell structures, infrastructure of rail routes, or development of digital elevation models for a wide range of applications. These issues often require the use of a variety of scanning techniques (stationary, mobile, but the differences also regard the planning of measurement stations and methods of merging point clouds. Significant differences appear during the analysis of point clouds, especially when modeling objects. Analysis of the selected parameters is already possible basing on ad hoc measurements carried out on a point cloud. However, only the construction of three-dimensional models provides complete information about the shape of structures, allows to perform the analysis in any place and reduces the amount of the stored data. Some structures can be modeled in the form of simple axes, sections, or solids, for others it becomes necessary to create sophisticated models of surfaces, depicting local deformations. The examples selected for the study allow to assess the scope of measurement and office work for a variety of uses related to the issue set forth in the title of this study. Additionally, the latest, forward-looking technology was presented - laser scanning performed from Unmanned Aerial Vehicles (drones. Currently, it is basically in the prototype phase, but it might be expected to make a significant progress in numerous applications in the field of engineering surveying.

  17. Curriculum and instructional methods for drug information, literature evaluation, and biostatistics: survey of US pharmacy schools.

    Science.gov (United States)

    Phillips, Jennifer A; Gabay, Michael P; Ficzere, Cathy; Ward, Kristina E

    2012-06-01

    The drug information curriculum in US colleges of pharmacy continues to evolve. The American College of Clinical Pharmacy (ACCP) Drug Information Practice and Research Network (DI PRN) published an opinion paper with specific recommendations regarding drug information education in 2009. Adoption of these recommendations has not been evaluated. To assess which recommendations made in the ACCP DI PRN opinion paper are included in US pharmacy school curricula and characterize faculty qualifications, educational methods, and recent changes in drug information education. An electronic survey was designed using the ACCP DI PRN opinion paper and the Accreditation Council for Pharmacy Education standards and guidelines for accreditation of PharmD programs in the US. Survey questions addressed curricular content within the following categories: drug information, literature evaluation, and biostatistics. A letter including the online survey link was sent via email to the dean of each US college/school of pharmacy (N = 128). Recipients were instructed to forward the email to the individual at their institution who was the most knowledgeable about the content and methodology used for didactic drug information education. Sixty-four responses were included in the final analysis. Of the 19 ACCP DI PRN minimum core concepts, 9 (47%) were included in curricula of all responding institutions; 14 of 19 (74%) were included in curricula for all but 1 institution. In contrast, 5 of 16 concepts (31%) were not formally taught by a number of institutions. Many respondents noted an increased focus on evidence-based medicine, medication safety, and informatics. Although a survey of drug information curricula documented substantial inclusion of the essential concepts presented in the ACCP DI PRN opinion paper, room for improvement remains in drug information curricula in US colleges of pharmacy.

  18. An Experience of Statistical Method Application in Forest Survey at Angara River Region in 1932

    Directory of Open Access Journals (Sweden)

    L. N. Vashchuk

    2014-10-01

    Full Text Available Report of the Angara forest economic expedition of forest economic survey in 1932 on the left bank of the Angara River has been found. The survey covered a part of Krasnoyarsk Territory and Irkutsk region, a total area of 18641.8 thousand ha. The report describes technology of forest inventory and achievements that have not previously been published. The survey was conducted by statistical method, which consisted of a sample by a continuous forest inventory enumeration of trees on sample plots (SP, arranged in an array on a particular system, followed by mathematical-statistical recalculation of the sample results to the entire survey. To do this, strip finders (sights were cut in the latitudinal direction at a distance from one another at 16 km. On the hacked sights, by every 2 km, 0.1 ha (10 × 100 m SP were established. In total 32 forest inventory sights were hacked, with total length of 9931 km, which incorporated 4817 SP. The accuracy of forest resources’ inventory characteristics determining also was investigated using smaller sample plots. For this purpose, each of the SP were cut to smaller area of 0.01 ha (10 × 10 m, where independent continuous enumeration of trees was conducted, andsample trees were cut, measured and bucked to the assortments, to explore the tree stand assortment structure. At each «sample cutting area» all the trees were felled out from 44 cm and above DBH. At half of the sample plot with 5 × 10 m size, located in the eastern end, all the trees were felled out and measured from 24 cm and above DBH. Every four «sample cutting area» in the fifth, all the trees with 12 cm and above DBH were cut down and measured. According to the results of the work, a detailed description of forest resources in the whole Angara river basin, and across 17 forest exploitation areas was completed.

  19. Adequacy of Flood Relief Shelters: A Case Study in Perak, Malaysia

    Science.gov (United States)

    Zawani Zahari, Nur; Mustafa Hashim, Ahmad

    2018-03-01

    The recent flood event occurred in 2014 had caused disastrous effects in Peninsular Malaysia in states of Kelantan, Pahang, Terengganu, Perak, Johor and Perlis. Perak state was reported with 12,115 victims from 2,896 families registered at 77 relief shelters. There are several issues encountered by the victims and related agencies which caused inconveniences and interruptions during the flooding period. Besides, the usage of public buildings as relief shelters contributes to deterioration of the infrastructures whereby their suitability, convenient, capacity and safety might not be optimum for longer period of time. This paper focuses on the assessment of relief shelters established in Perak Tengah district, Perak. Standards and guidelines for relief shelters were reviewed according to the most relevant agreed principles for humanitarian response. Data and information in this study were obtained from survey activities, interview sessions and observations. In Perak Tengah, more than 50% of the previous relief shelters were public buildings with low capacity areas. Strategic location of shelters with proper design standards should be established to ensure safe and healthy environment for the victims. Findings from this paper provide important outcomes to serve as better preparation in handling future disaster.

  20. A citizen science based survey method for estimating the density of urban carnivores

    Science.gov (United States)

    Baker, Rowenna; Charman, Naomi; Karlsson, Heidi; Yarnell, Richard W.; Mill, Aileen C.; Smith, Graham C.; Tolhurst, Bryony A.

    2018-01-01

    Globally there are many examples of synanthropic carnivores exploiting growth in urbanisation. As carnivores can come into conflict with humans and are potential vectors of zoonotic disease, assessing densities in suburban areas and identifying factors that influence them are necessary to aid management and mitigation. However, fragmented, privately owned land restricts the use of conventional carnivore surveying techniques in these areas, requiring development of novel methods. We present a method that combines questionnaire distribution to residents with field surveys and GIS, to determine relative density of two urban carnivores in England, Great Britain. We determined the density of: red fox (Vulpes vulpes) social groups in 14, approximately 1km2 suburban areas in 8 different towns and cities; and Eurasian badger (Meles meles) social groups in three suburban areas of one city. Average relative fox group density (FGD) was 3.72 km-2, which was double the estimates for cities with resident foxes in the 1980’s. Density was comparable to an alternative estimate derived from trapping and GPS-tracking, indicating the validity of the method. However, FGD did not correlate with a national dataset based on fox sightings, indicating unreliability of the national data to determine actual densities or to extrapolate a national population estimate. Using species-specific clustering units that reflect social organisation, the method was additionally applied to suburban badgers to derive relative badger group density (BGD) for one city (Brighton, 2.41 km-2). We demonstrate that citizen science approaches can effectively obtain data to assess suburban carnivore density, however publicly derived national data sets need to be locally validated before extrapolations can be undertaken. The method we present for assessing densities of foxes and badgers in British towns and cities is also adaptable to other urban carnivores elsewhere. However this transferability is contingent on

  1. Medications for Pain Relief during Labor and Delivery

    Science.gov (United States)

    ... FAQ086 LABOR, DELIVERY, AND POSTPARTUM CARE Medications for Pain Relief During Labor and Delivery • What types of medications for pain relief are used during labor and delivery? • What are ...

  2. Mechanical Designs for Relief Valves for Cryogenic Apparatuses and Installations

    CERN Multimedia

    CERN. Geneva

    2016-01-01

    There are also pressure relief valves with warm seat available on which the set pressure is based on an adjustment of forces by permanent magnets. Pressure vessel rules allows also the choice for an active triggered pressure relief valve (Cont...

  3. Vibration stress relief of DH 36 rectangle welded plates

    Science.gov (United States)

    Li, Shuqi; Fang, Hongyuan

    2018-03-01

    Vibration stress relief (VSR) is widely used in reducing residual stress in welded structures. However, the effectiveness of this method is still instable in some circumstance. In this study, a covert negative treatment phenomenon was investigated, i.e. natural frequency of welded structures decreased after VSR but residual stress in one direction increased. When the alteration of natural frequency after VSR is significant, the residual stresses in both the longitudinal and transversal directions shall decrease. Otherwise, residual stresses may increase on one direction. Thus, sufficient power shall be applied to the welded structures to avoid negative results.

  4. Knowledge-attitude-practice survey among Portuguese gynaecologists regarding combined hormonal contraceptives methods.

    Science.gov (United States)

    Bombas, Teresa; Costa, Ana Rosa; Palma, Fátima; Vicente, Lisa; Sá, José Luís; Nogueira, Ana Maria; Andrade, Sofia

    2012-04-01

    ABSTRACT Objectives To evaluate knowledge, attitude and practices of Portuguese gynaecologists regarding combined hormonal contraceptives. Methods A cross-sectional survey was conducted among 303 gynaecologists. Results Ninety percent of the gynaecologists considered that deciding on contraceptive methods is a process wherein the woman has her say. Efficacy, safety and the woman's preference were the major factors influencing gynaecologists, while efficacy, tolerability and ease of use were the major factors perceived by the specialists to influence the women's choice. Gynaecologists believed that only 2% of women taking the pill were 100% compliant compared to 48% of those using the patch and 75% of those using the ring. The lower risk of omission was the strong point for the latter methods. Side effects were the main reason to change to another method. Vaginal manipulation was the most difficult topic to discuss. Conclusions Most gynaecologists decided with the woman on the contraceptive method. The main reasons for the gynaecologist's recommendation of a given contraceptive method and the women's choice were different. Counselling implies an open discussion and topics related to sexuality were considered difficult to discuss. Improving communication skills and understanding women's requirements are critical for contraceptive counselling.

  5. Chapter 12: Survey Design and Implementation for Estimating Gross Savings Cross-Cutting Protocol. The Uniform Methods Project: Methods for Determining Energy Efficiency Savings for Specific Measures

    Energy Technology Data Exchange (ETDEWEB)

    Kurnik, Charles W [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Baumgartner, Robert [Tetra Tech, Madison, WI (United States)

    2017-10-05

    This chapter presents an overview of best practices for designing and executing survey research to estimate gross energy savings in energy efficiency evaluations. A detailed description of the specific techniques and strategies for designing questions, implementing a survey, and analyzing and reporting the survey procedures and results is beyond the scope of this chapter. So for each topic covered below, readers are encouraged to consult articles and books cited in References, as well as other sources that cover the specific topics in greater depth. This chapter focuses on the use of survey methods to collect data for estimating gross savings from energy efficiency programs.

  6. Method and Mchievement of Survey and Evaluation of Groundwater Resources of Guangzhou City

    Science.gov (United States)

    Lin, J.

    2017-12-01

    Based on the documents and achievements relevant to hydrogeological surveying and mapping of 1:100000, hydrogeological drilling, pumping test and dynamic monitoring of groundwater level in Guangzhou, considering the hydrogeological conditions of Guangzhou and combining the advanced technologies such as remote sensing, the survey and evaluation of the volume of the groundwater resources of Guangzhou was carried out in plain and mountain areas separately. The recharge method was used to evaluate the volume of groundwater resources in plain areas, meanwhile, the output volume and the storage change volume of groundwater were calculated and the volume of groundwater resources was corrected by water balance analysis; while the discharge method was used to evaluated the volume of groundwater resources in mountain areas. The result of survey and evaluation indicates that: the volume of the natural groundwater resources in Guangzhou City is 1.83 billion m3 of which the groundwater replenishment quantity in plain areas is 510,045,000 m3, with a total output of 509,729,000 m3, an absolute balance difference of 316,000 m3 and a relative balance difference of 0.062%; the volume of groundwater resources in mountain areas is 1,358,208,000 m3 including the river basic flow is 965,054,000 m3; the repetitive counted volume of groundwater resources in both plain areas and mountain areas is 38,839,000 m3. This work was realized by refined means for the first time to entirely find out the volume of groundwater resources of Guangzhou City and the law of their distribution so as to lay an important foundation for the protection and reasonable development and exploration of the groundwater resources of Guangzhou City.

  7. Late-Cenozoic relief evolution under evolving climate: A review

    OpenAIRE

    Champagnac Jean Daniel; Valla Pierre G.; Herman Frédéric

    2014-01-01

    The present review paper is an attempt to summarize quantitative evidence of Late Cenozoic changes in topographic relief. Different meanings of the word "relief" as it is commonly used and detail the metrics used to quantify it. We then specify methodological tools used to quantify relief change (primarily low temperature thermochronometry and terrestrial cosmogenic nuclides) and analyze published evidence for different regions.Our review first shows that relief changes and rates of changes a...

  8. Teaching Intercultural Communication in a Basic Technical Writing Course: A Survey of Our Current Practices and Methods

    Science.gov (United States)

    Matveeva, Natalia

    2008-01-01

    This research article reports the results of an online survey distributed among technical writing instructors in 2006. The survey aimed to examine how we teach intercultural communication in basic technical writing courses: our current practices and methods. The article discusses three major challenges that instructors may face when teaching about…

  9. Continuing to Confront COPD International Patient Survey : methods, COPD prevalence, and disease burden in 2012-2013

    NARCIS (Netherlands)

    Landis, Sarah H.; Muellerova, Hana; Mannino, David M.; Menezes, Ana M.; Han, MeiLan K.; van der Molen, Thys; Ichinose, Masakazu; Aisanov, Zaurbek; Oh, Yeon-Mok; Davis, Kourtney J.

    2014-01-01

    Purpose: The Continuing to Confront COPD International Patient Survey aimed to estimate the prevalence and burden of COPD globally and to update findings from the Confronting COPD International Survey conducted in 1999-2000. Materials and methods: Chronic obstructive pulmonary disease (COPD)

  10. A Method for Recruiting Participants from Isolated Islands of Small Island Developing States (SIDS) for Survey Research

    Science.gov (United States)

    Moosa, Sheena; Koopman-Boyden, Peggy

    2016-01-01

    Representing isolated small island communities through social survey research continues to be challenging. We examine a locally developed method to reach and recruit older people (65+ years) for a survey on well-being in the small island developing state of Maldives. The use of messengers to recruit participants is examined in the context of these…

  11. A field survey on coffee beans drying methods of Indonesian small holder farmers

    Science.gov (United States)

    Siagian, Parulian; Setyawan, Eko Y.; Gultom, Tumiur; Napitupulu, Farel H.; Ambarita, Himsar

    2017-09-01

    Drying agricultural product is a post-harvest process that consumes significant energy. It can affect the quality of the product. This paper deals with literature review and field survey of drying methods of coffee beans of Indonesia farmers. The objective is to supply the necessary information on developing continuous solar drier. The results show that intermittent characteristic of sun drying results in a better quality of coffee beans in comparison with constant convective drying. In order to use energy efficiently, the drying process should be divided into several stages. In the first stage when the moist content is high, higher drying air temperature is more effective. After this step, where the moist content is low, lower drying air temperature is better. The field survey of drying coffee beans in Sumatera Utara province reveals that the used drying process is very traditional. It can be divided into two modes and depend on the coffee beans type. The Arabica coffee is firstly fermented and dried to moisture content of 80% using sun drying method, then followed by Green House model of drying up to moisture content about 12%. The latter typically spends 3 days of drying time. On the other hand, The Robusta coffee is dried by exposing to the sun directly without any treatment. After the coffee beans dried follow by peeled process. These findings can be considered to develop a continuous solar drying that suitable for coffee beans drying.

  12. Geostatistical methods for rock mass quality prediction using borehole and geophysical survey data

    Science.gov (United States)

    Chen, J.; Rubin, Y.; Sege, J. E.; Li, X.; Hehua, Z.

    2015-12-01

    For long, deep tunnels, the number of geotechnical borehole investigations during the preconstruction stage is generally limited. Yet tunnels are often constructed in geological structures with complex geometries, and in which the rock mass is fragmented from past structural deformations. Tunnel Geology Prediction (TGP) is a geophysical technique widely used during tunnel construction in China to ensure safety during construction and to prevent geological disasters. In this paper, geostatistical techniques were applied in order to integrate seismic velocity from TGP and borehole information into spatial predictions of RMR (Rock Mass Rating) in unexcavated areas. This approach is intended to apply conditional probability methods to transform seismic velocities to directly observed RMR values. The initial spatial distribution of RMR, inferred from the boreholes, was updated by including geophysical survey data in a co-kriging approach. The method applied to a real tunnel project shows significant improvements in rock mass quality predictions after including geophysical survey data, leading to better decision-making for construction safety design.

  13. Ubiquitous Creation of Bas-Relief Surfaces with Depth-of-Field Effects Using Smartphones

    Directory of Open Access Journals (Sweden)

    Bong-Soo Sohn

    2017-03-01

    Full Text Available This paper describes a new method to automatically generate digital bas-reliefs with depth-of-field effects from general scenes. Most previous methods for bas-relief generation take input in the form of 3D models. However, obtaining 3D models of real scenes or objects is often difficult, inaccurate, and time-consuming. From this motivation, we developed a method that takes as input a set of photographs that can be quickly and ubiquitously captured by ordinary smartphone cameras. A depth map is computed from the input photographs. The value range of the depth map is compressed and used as a base map representing the overall shape of the bas-relief. However, the resulting base map contains little information on details of the scene. Thus, we construct a detail map using pixel values of the input image to express the details. The base and detail maps are blended to generate a new depth map that reflects both overall depth and scene detail information. This map is selectively blurred to simulate the depth-of-field effects. The final depth map is converted to a bas-relief surface mesh. Experimental results show that our method generates a realistic bas-relief surface of general scenes with no expensive manual processing.

  14. A survey on the task analysis methods and techniques for nuclear power plant operators

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Yong Heui; Chun, Se Woo; Suh, Sang Moon; Lee, Jung Woon [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    1994-04-01

    We have surveyed techniques and methods of task analysis from very traditional ones to recently developed ones that are being applicated to various industrial fields. We compare each other and analyse their fundamental characteristics and methodological specification in order to find a proper one enough to apply to nuclear power plant operators tasks. Generally, the fundamental process of task analyses has well been understandable, but its process of application in practice has not been so simple due to the wide and varying range of applications according to specific domain. Operators` tasks in NPPs are supposed to be performed strictly according to operational procedures written in a text and well trained, so the method of task analysis for operators` tasks in NPPs can be established to have its unique characteristics of task analysis based on the operational procedures. 8 figs., 10 tabs., 18 refs. (Author).

  15. A survey on the task analysis methods and techniques for nuclear power plant operators

    International Nuclear Information System (INIS)

    Lee, Yong Heui; Chun, Se Woo; Suh, Sang Moon; Lee, Jung Woon

    1994-04-01

    We have surveyed techniques and methods of task analysis from very traditional ones to recently developed ones that are being applicated to various industrial fields. We compare each other and analyse their fundamental characteristics and methodological specification in order to find a proper one enough to apply to nuclear power plant operators tasks. Generally, the fundamental process of task analyses has well been understandable, but its process of application in practice has not been so simple due to the wide and varying range of applications according to specific domain. Operators' tasks in NPPs are supposed to be performed strictly according to operational procedures written in a text and well trained, so the method of task analysis for operators' tasks in NPPs can be established to have its unique characteristics of task analysis based on the operational procedures. 8 figs., 10 tabs., 18 refs. (Author)

  16. Methods for solving reasoning problems in abstract argumentation – A survey

    Science.gov (United States)

    Charwat, Günther; Dvořák, Wolfgang; Gaggl, Sarah A.; Wallner, Johannes P.; Woltran, Stefan

    2015-01-01

    Within the last decade, abstract argumentation has emerged as a central field in Artificial Intelligence. Besides providing a core formalism for many advanced argumentation systems, abstract argumentation has also served to capture several non-monotonic logics and other AI related principles. Although the idea of abstract argumentation is appealingly simple, several reasoning problems in this formalism exhibit high computational complexity. This calls for advanced techniques when it comes to implementation issues, a challenge which has been recently faced from different angles. In this survey, we give an overview on different methods for solving reasoning problems in abstract argumentation and compare their particular features. Moreover, we highlight available state-of-the-art systems for abstract argumentation, which put these methods to practice. PMID:25737590

  17. An enhanced sine dwell method as applied to the Galileo core structure modal survey

    Science.gov (United States)

    Smith, Kenneth S.; Trubert, Marc

    1990-01-01

    An incremental modal survey performed in 1988 on the core structure of the Galileo spacecraft with its adapters with the purpose of assessing the dynamics of the new portions of the structure is considered. Emphasis is placed on the enhancements of the sine dwell method employed in the test. For each mode, response data is acquired at 32 frequencies in a narrow band enclosing the resonance, utilizing the SWIFT technique. It is pointed out that due to the simplicity of the data processing involved, the diagnostic and modal-parameter data is available within several minutes after data acquisition; however, compared with straight curve-fitting approaches, the method requires more time for data acquisition.

  18. Use, perceived effectiveness, and gender differences of pain relief strategies among the community-dwelling elderly in Taiwan.

    Science.gov (United States)

    Yu, Hsing-Yi; Tang, Fu-In; Yeh, Ming-Chen; Kuo, Benjamin Ing-Tiau; Yu, Shu

    2011-03-01

    Pain is a common problem among the elderly. The entire scope of chronic pain relief strategies used by community elderly is still unclear. A limited number of studies have investigated this issue from diverse culture perspectives. In the present study, we investigated the use and perceived effectiveness of pain relief strategies adopted by the elderly; gender differences between frequently used relief strategies were also explored. Two hundred nineteen participants living in Taiwan City, Taiwan, were recruited by a random sampling method and interviewed face to face. The prevalence of chronic pain among the elderly was 42.0% (n = 92). The elderly tended to adopt multiple strategies (mean ± SD = 9.08 ± 3.56; range = 2-18) to relieve their chronic pain. In three domains of pain relief strategies, conventional medicine was used more frequently than complementary and alternative medicine and psychologic approaches. Most pain relief strategies were ineffective. Among the 22 strategies used, no strategy was reported as "much improved" by a majority of users. The top five pain relief strategies used by men and women were the same. Elderly women tended to adopt more psychologic approaches, such as acceptance and ignoring to relieve pain, than men. The findings suggest that nurses should pay more attention to the issue of chronic pain relief and provide the elderly with more effective pain relief strategies. Copyright © 2011 American Society for Pain Management Nursing. Published by Elsevier Inc. All rights reserved.

  19. Crisis Communication Practices at an International Relief Agency

    Science.gov (United States)

    Genova, Gina L.

    2006-01-01

    When a disaster strikes, the affected population relies upon the swift response and aid rendered by relief organizations such as the California-based Direct Relief International. Since 1948, Direct Relief's mission has been to provide essential material resources to locally run health programs in areas affected by natural disasters, wars, and…

  20. 48 CFR 252.229-7001 - Tax relief.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 3 2010-10-01 2010-10-01 false Tax relief. 252.229-7001... Clauses 252.229-7001 Tax relief. As prescribed in 229.402-70(a), use the following clause: Tax Relief (JUN 1997) (a) Prices set forth in this contract are exclusive of all taxes and duties from which the United...

  1. 19 CFR 210.52 - Motions for temporary relief.

    Science.gov (United States)

    2010-04-01

    ....52 Customs Duties UNITED STATES INTERNATIONAL TRADE COMMISSION INVESTIGATIONS OF UNFAIR PRACTICES IN IMPORT TRADE ADJUDICATION AND ENFORCEMENT Temporary Relief § 210.52 Motions for temporary relief... issuance of temporary relief, the Commission will be guided by practice under Rule 65 of the Federal Rules...

  2. Photobiomodulation: Implications for Anesthesia and Pain Relief.

    Science.gov (United States)

    Chow, Roberta T; Armati, Patricia J

    2016-12-01

    This review examines the evidence of neural inhibition as a mechanism underlying pain relief and anesthetic effect of photobiomodulation (PBM). PBM for pain relief has also been used for more than 30 years; however, the mechanism of its effectiveness has not been well understood. We review electrophysiological studies in humans and animal models and cell culture studies to examine neural responses to PBM. Evidence shows that PBM can inhibit nerve function in vivo, in situ, ex vivo, and in culture. Animal studies using noxious stimuli indicate nociceptor-specific inhibition with other studies providing direct evidence of local conduction block, leading to inhibited translation of pain centrally. Evidence of PBM-disrupted neuronal physiology affecting axonal flow, cytoskeleton organization, and decreased ATP is also presented. PBM changes are reversible with no side effects or nerve damage. This review provides strong evidence in neuroscience identifying inhibition of neural function as a mechanism for the clinical application of PBM in pain and anesthesia.

  3. Bali, Shaded Relief and Colored Height

    Science.gov (United States)

    2004-01-01

    The volcanic nature of the island of Bali is evident in this shaded relief image generated with data from the Shuttle Radar Topography Mission (SRTM).Bali, along with several smaller islands, make up one of the 27 Provinces of Indonesia. It lies over a major subduction zone where the Indo-Australian tectonic plate collides with the Sunda plate, creating one of the most volcanically active regions on the planet.The most significant feature on Bali is Gunung Agung, the symmetric, conical mountain at the right-center of the image. This 'stratovolcano,' 3,148 meters (10,308 feet) high, is held sacred in Balinese culture, and last erupted in 1963 after being dormant and thought inactive for 120 years. This violent event resulted in over 1,000 deaths, and coincided with a purification ceremony called Eka Dasa Rudra, meant to restore the balance between nature and man. This most important Balinese rite is held only once per century, and the almost exact correspondence between the beginning of the ceremony and the eruption is though to have great religious significance.Two visualization methods were combined to produce the image: shading and color coding of topographic height. The shade image was derived by computing topographic slope in the northwest-southeast direction, so that northwest slopes appear bright and southeast slopes appear dark. Color coding is directly related to topographic height, with green at the lower elevations, rising through yellow and tan, to white at the highest elevations.Elevation data used in this image were acquired by the Shuttle Radar Topography Mission aboard the Space Shuttle Endeavour, launched on Feb. 11, 2000. SRTM used the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar (SIR-C/X-SAR) that flew twice on the Space Shuttle Endeavour in 1994. SRTM was designed to collect 3-D measurements of the Earth's surface. To collect the 3-D data, engineers added a 60-meter (approximately 200-foot

  4. Colored Height and Shaded Relief, Kamchatka Peninsula

    Science.gov (United States)

    2002-01-01

    Russia's Kamchatka Peninsula, lying between the Sea of Okhotsk to the west and the Bering Sea and Pacific Ocean to the east, is one of the most active volcanic regions along the Pacific Ring of Fire. It covers an area about the size of Colorado but contains more than 100 volcanoes stretching across the 1000-kilometer-long (620-mile-long) land mass. A dozen or more of these have active vents, with the youngest located along the eastern half of the peninsula. This color-coded shaded relief image, generated with data from the Shuttle Radar Topography Mission (SRTM), shows Kamchatka's volcanic nature to dramatic effect.Kliuchevskoi, one of the most active and renowned volcanoes in the world, dominates the main cluster of volcanoes called the Kliuchi group, visible as a circular feature in the center-right of the image. The two other main volcanic ranges lie along northeast-southwest lines, with the older, less active range occupying the center and western half of Kamchatka. The younger, more active belt begins at the southernmost point of the peninsula and continues upward along the Pacific coastline.Two visualization methods were combined to produce this image: shading and color coding of topographic height. The shade image was derived by computing topographic slope in the north-south direction, so northern slopes appear bright and southern slopes appear dark. Color coding is directly related to topographic height, with green at the lower elevations, rising through yellow and brown to white at the highest elevations.The Shuttle Radar Topography Mission flew aboard the Space Shuttle Endeavour, launched on February 11, 2000. The mission used the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar that flew twice on the Space Shuttle Endeavour in 1994. The Shuttle Radar Topography Mission was designed to collect three-dimensional measurements of the Earth's surface. To collect the 3-D data, engineers added a 60-meter (200

  5. Sinai Peninsula, Shaded Relief and Colored Height

    Science.gov (United States)

    2004-01-01

    The Sinai Peninsula, located between Africa and Asia, is a result of those two continents pulling apart from each other. Earth's crust is cracking, stretching, and lowering along the two northern branches of the Red Sea, namely the Gulf of Suez, seen here on the west (left), and the Gulf of Aqaba, seen to the east (right). This color-coded shaded relief image shows the triangular nature of the peninsula, with the coast of the Mediterranean Sea forming the northern side of the triangle. The Suez Canal can be seen as the narrow vertical blue line in the upper left connecting the Red Sea to the Mediterranean. The peninsula is divided into three distinct parts; the northern region consisting chiefly of sandstone, plains and hills, the central area dominated by the Tih Plateau, and the mountainous southern region where towering peaks abound. Much of the Sinai is deeply dissected by river valleys, or wadis, that eroded during an earlier geologic period and break the surface of the plateau into a series of detached massifs with a few scattered oases. Two visualization methods were combined to produce the image: shading and color coding of topographic height. The shade image was derived by computing topographic slope in the northwest-southeast direction, so that northwest slopes appear bright and southeast slopes appear dark. Color coding is directly related to topographic height, with green at the lower elevations, rising through yellow and tan, to white at the highest elevations. Elevation data used in this image were acquired by the Shuttle Radar Topography Mission aboard the Space Shuttle Endeavour, launched on Feb. 11, 2000. SRTM used the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar (SIR-C/X-SAR) that flew twice on the Space Shuttle Endeavour in 1994. SRTM was designed to collect 3-D measurements of the Earth's surface. To collect the 3-D data, engineers added a 60-meter (approximately 200-foot) mast, installed

  6. Ireland, Shaded Relief and Colored Height

    Science.gov (United States)

    2005-01-01

    The island of Ireland comprises a large central lowland of limestone with a relief of hills surrounded by a discontinuous border of coastal mountains which vary greatly in geological structure. The mountain ridges of the south are composed of old red sandstone separated by limestone river valleys. Granite predominates in the mountains of Galway, Mayo and Donegal in the west and north-west and in Counties Down and Wicklow on the east coast, while a basalt plateau covers much of the north-east of the country. The central plain, which is broken in places by low hills, is extensively covered with glacial deposits of clay and sand. It has considerable areas of bog and numerous lakes. The island has seen at least two general glaciations and everywhere ice-smoothed rock, mountain lakes, glacial valleys and deposits of glacial sand, gravel and clay mark the passage of the ice. Two visualization methods were combined to produce this image: shading and color coding of topographic height. The shade image was derived by computing topographic slope in the northwest-southeast direction, so that northwest slopes appear bright and southeast slopes appear dark. Color coding is directly related to topographic height, with green at the lower elevations, rising through yellow and tan, to white at the highest elevations. Elevation data used in this image were acquired by the Shuttle Radar Topography Mission aboard the Space Shuttle Endeavour, launched on Feb. 11, 2000. SRTM used the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar (SIR-C/X-SAR) that flew twice on the Space Shuttle Endeavour in 1994. SRTM was designed to collect 3-D measurements of the Earth's surface. To collect the 3-D data, engineers added a 60-meter (approximately 200-foot) mast, installed additional C-band and X-band antennas, and improved tracking and navigation devices. The mission is a cooperative project between NASA, the National Geospatial-Intelligence Agency

  7. Study on Developments in Accident Investigation Methods: A Survey of the 'State-of-the-Art'

    International Nuclear Information System (INIS)

    Hollnagel, Erik; Speziali, Josephine

    2008-01-01

    The objective of this project was to survey the main accident investigation methods that have been developed since the early or mid-1990s. The motivation was the increasing frequency of accidents that defy explanations in simple terms, for instance cause-effect chains or 'human error'. Whereas the complexity of socio-technical systems is steadily growing across all industrial domains, including nuclear power production, accident investigation methods are only updated when their inability to account for novel types of accidents and incidents becomes inescapable. Accident investigation methods therefore typically lag behind the socio-technological developments by 20 years or more. The project first compiled a set of methods from the recognised scientific literature and in major major research and development programs, excluding methods limited to risk assessment, technological malfunctions, human reliability, and safety management methods. An initial set of 21 methods was further reduced to seven by retaining only prima facie accident investigation methods and avoiding overlapping or highly similar methods. The second step was to develop a set of criteria used to characterise the methods. The starting point was Perrow's description of normal accidents in socio-technical systems, which used the dimensions of coupling, going from loose to tight, and interactions, going from linear to complex. For practical reasons, the second dimension was changed to that of tractability or how easy it is to describe the system, where the sub-criteria are the level of detail, the availability of an articulated model, and the system dynamics. On this basis the seven selected methods were characterised in terms of the systems - or conditions - they could account for, leading to the following four groups: methods suitable for systems that are loosely coupled and tractable, methods suitable for systems that are tightly coupled and tractable, methods suitable for systems that are loosely

  8. Survey of sterile admixture practices in canadian hospital pharmacies: part 1. Methods and results.

    Science.gov (United States)

    Warner, Travis; Nishi, Cesilia; Checkowski, Ryan; Hall, Kevin W

    2009-03-01

    The 1996 Guidelines for Preparation of Sterile Products in Pharmacies of the Canadian Society of Hospital Pharmacists (CSHP) represent the current standard of practice for sterile compounding in Canada. However, these guidelines are practice recommendations, not enforceable standards. Previous surveys of sterile compounding practices have shown that actual practice deviates markedly from voluntary practice recommendations. In 2004, the United States Pharmacopeia (USP) published its "General Chapter Pharmaceutical Compounding-Sterile Preparations", which set a more rigorous and enforceable standard for sterile compounding in the United States. To assess sterile compounding practices in Canadian hospital pharmacies and to compare them with current CSHP recommendations and USP chapter standards. An online survey, based on previous studies of sterile compounding practices, the CSHP guidelines, and the chapter standards, was created and distributed to 193 Canadian hospital pharmacies. A total of 133 pharmacies completed at least part of the survey, for a response rate of 68.9%. All respondents reported the preparation of sterile products. Various degrees of deviation from the practice recommendations were noted for virtually all areas of the CSHP guidelines and the USP standards. Low levels of compliance were most notable in the areas of facilities and equipment, process validation, and product testing. Availability in the central pharmacy of a clean room facility meeting or exceeding the criteria of International Organization for Standardization (ISO) class 8 is a requirement of the chapter standards, but more than 40% of responding pharmacies reported that they did not have such a facility. Higher levels of compliance were noted for policies and procedures, garbing requirements, aseptic technique, and handling of hazardous products. Part 1 of this series reports the survey methods and results relating to policies, personnel, raw materials, storage and handling

  9. Interest of LQAS method in a survey of HTLV-I infection in Benin (West Africa).

    Science.gov (United States)

    Houinato, Dismand; Preux, Pierre-Marie; Charriere, Bénédicte; Massit, Bruno; Avodé, Gilbert; Denis, François; Dumas, Michel; Boutros-Toni, Fernand; Salamon, Roger

    2002-02-01

    HTLV-I is heterogeneously distributed in Sub-Saharan Africa. Traditional survey methods as cluster sampling could provide information for a country or region of interest. However, they cannot identify small areas with higher prevalences of infection to help in the health policy planning. Identification of such areas could be done by a Lot Quality Assurance Sampling (LQAS) method, which is currently used in industry to identify a poor performance in assembly lines. The LQAS method was used in Atacora (Northern Benin) between March and May 1998 to identify areas with a HTLV-I seroprevalence higher than 4%. Sixty-five subjects were randomly selected in each of 36 communes (lots) of this department. Lots were classified as unacceptable when the sample contained at least one positive subject. The LQAS method identified 25 (69.4 %) communes with a prevalence higher than 4%. Using stratified sampling theory, the overall HTLV-I seroprevalence was 4.5% (95% CI: 3.6-5.4%). These data show the interest of LQAS method application under field conditions to detect clusters of infection.

  10. Coordinating Robot Teams for Disaster Relief

    Science.gov (United States)

    2015-05-01

    eventually guide vehicles in cooperation with its Operator(s), but in this paper we assume static mission goals, a fixed number of vehicles, and a...is tedious and error prone. Kress-Gazit et al. (2009) instead synthesize an FSA from an LTL specification using a game theory approach (Bloem et al...helping an Operator coordinate a team of vehicles in Disaster Relief. Acknowledgements Thanks to OSD ASD (R&E) for sponsoring this research. The

  11. Relief Evolution in Tectonically Active Mountain Ranges

    Science.gov (United States)

    Whipple, Kelin X.

    2004-01-01

    The overall aims of this 3-yr project, as originally proposed were to: (1) investigate quantitatively the roles of fluvial and glacial erosion in the evolution of relief in mountainous regions, and (2) test rigorously the quality and accuracy of SRTM topographic data in areas of rugged relief - both the most challenging and of greatest interest to geomorphic, neotectonic, and hazards applications. Natural laboratories in both the western US and the Southern Alps of New Zealand were identified as most promising. The project has been both successful and productive, despite the fact that no SRTM data for our primary field sites in New Zealand were released on the time frame of the work effort. Given the delayed release of SRTM data, we pursued the scientific questions of the roles of fluvial and, especially, glacial erosion in the evolution of relief in mountainous regions using available digital elevation models (DEMs) for the Southern Alps of New Zealand (available at both 25m and 50m pixel sizes), and USGS 10m and 30m DEMs within the Western US. As emphasized in the original proposal, we chose the emphasis on the role of glacial modification of topographic relief because there has been little quantitative investigation of glacial erosion processes at landscape scale. This is particularly surprising considering the dramatic sculpting of most mid- and high-latitude mountain ranges, the prodigious quantities of glacially-derived sediment in terrestrial and marine basins, and the current cross-disciplinary interest in the role of denudational processes in orogenesis and the evolution of topography in general. Moreover, the evolution of glaciated landscapes is not only a fundamental problem in geomorphology in its own right, but also is at the heart of the debate over Late Cenozoic linkages between climate and tectonics.

  12. Venting of gas deflagrations through relief pipes

    OpenAIRE

    Ferrara, Gabriele

    2006-01-01

    Vent devices for gas and dust explosions are often ducted to safety locations by means of relief pipes for the discharge of hot combustion products or blast waves (NFPA 68, 2002). The presence of the duct is likely to increase the severity of the explosion with respect to simply vented vessels posing a problem for the proper design of this venting configuration. The phenomenology of the vented explosion is complicated as the interaction of combustion in the duct with primary combustion in...

  13. Men who have sex with men in Great Britain: comparing methods and estimates from probability and convenience sample surveys.

    Science.gov (United States)

    Prah, Philip; Hickson, Ford; Bonell, Chris; McDaid, Lisa M; Johnson, Anne M; Wayal, Sonali; Clifton, Soazig; Sonnenberg, Pam; Nardone, Anthony; Erens, Bob; Copas, Andrew J; Riddell, Julie; Weatherburn, Peter; Mercer, Catherine H

    2016-09-01

    To examine sociodemographic and behavioural differences between men who have sex with men (MSM) participating in recent UK convenience surveys and a national probability sample survey. We compared 148 MSM aged 18-64 years interviewed for Britain's third National Survey of Sexual Attitudes and Lifestyles (Natsal-3) undertaken in 2010-2012, with men in the same age range participating in contemporaneous convenience surveys of MSM: 15 500 British resident men in the European MSM Internet Survey (EMIS); 797 in the London Gay Men's Sexual Health Survey; and 1234 in Scotland's Gay Men's Sexual Health Survey. Analyses compared men reporting at least one male sexual partner (past year) on similarly worded questions and multivariable analyses accounted for sociodemographic differences between the surveys. MSM in convenience surveys were younger and better educated than MSM in Natsal-3, and a larger proportion identified as gay (85%-95% vs 62%). Partner numbers were higher and same-sex anal sex more common in convenience surveys. Unprotected anal intercourse was more commonly reported in EMIS. Compared with Natsal-3, MSM in convenience surveys were more likely to report gonorrhoea diagnoses and HIV testing (both past year). Differences between the samples were reduced when restricting analysis to gay-identifying MSM. National probability surveys better reflect the population of MSM but are limited by their smaller samples of MSM. Convenience surveys recruit larger samples of MSM but tend to over-represent MSM identifying as gay and reporting more sexual risk behaviours. Because both sampling strategies have strengths and weaknesses, methods are needed to triangulate data from probability and convenience surveys. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

  14. Structural dynamics in LMFBR containment analysis. A brief survey of computational methods and codes

    International Nuclear Information System (INIS)

    Chang, Y.W.

    1977-01-01

    This paper gives a brief survey of the computational methods and codes available for LMFBR containment analysis. The various numerical methods commonly used in the computer codes are compared. It provides the reactor engineers to up-to-date information on the development of structural dynamics in LMFBR containment analysis. It can also be used as a basis for the selection of the numerical method in the future code development. First, the commonly used finite-difference expressions in the Lagrangian codes will be compared. Sample calculations will be used as a basis for discussing and comparing the accuracy of the various finite-difference representations. The distortion of the meshes will also be compared; the techniques used for eliminating the numerical instabilities will be discussed and compared using examples. Next, the numerical methods used in the Eulerian formulation will be compared, first among themselves and then with the Lagrangian formulations. Special emphasis is placed on the effect of mass diffusion of the Eulerian calculation on the propagation of discontinuities. Implicit and explicit numerical integrations will be discussed and results obtained from these two techniques will be compared. Then, the finite-element methods are compared with the finite-difference methods. The advantages and disadvantages of the two methods will be discussed in detail, together with the versatility and ease of application of the method to containment analysis having complex geometries. It will also be shown that the finite-element equations for a constant-pressure fluid element is identical to the finite-difference equations using contour integrations. Finally, conclusions based on this study will be given

  15. A detailed survey of numerical methods for unconstrained minimization. Pt. 1

    International Nuclear Information System (INIS)

    Mika, K.; Chaves, T.

    1980-01-01

    A detailed description of numerical methods for unconstrained minimization is presented. This first part surveys in particular conjugate direction and gradient methods, whereas variable metric methods will be the subject of the second part. Among the results of special interest we quote the following. The conjugate direction methods of Powell, Zangwill and Sutti can be best interpreted if the Smith approach is adopted. The conditions for quadratic termination of Powell's first procedure are analyzed. Numerical results based on nonlinear least squares problems are presented for the following conjugate direction codes: VA04AD from Harwell Subroutine Library and ZXPOW from IMSL, both implementations of Powell's second procedure, DFMND from IBM-SILMATH (Zangwill's method) and Brent's algorithm PRAXIS. VA04AD turns out to be superior in all cases, PRAXIS improves for high-dimensional problems. All codes clearly exhibit superlinear convergence. Akaike's result for the method of steepest descent is derived directly from a set of nonlinear recurrence relations. Numerical results obtained with the highly ill conditioned Hilbert function confirm the theoretical predictions. Several properties of the conjugate gradient method are presented and a new derivation of the equivalence of steepest descent partan and the CG method is given. A comparison of numerical results from the CG codes VA08AD (Fletcher-Reeves), DFMCG (the SSP version of the Fletcher-Reevens algorithm) and VA14AD (Powell's implementation of the Polak-Ribiere formula) reveals that VA14AD is clearly superior in all cases, but that the convergence rate of these codes is only weakly superlinear such that high accuracy solutions require extremely large numbers of function calls. (orig.)

  16. Comparison of Health Examination Survey Methods in Brazil, Chile, Colombia, Mexico, England, Scotland, and the United States.

    Science.gov (United States)

    Mindell, Jennifer S; Moody, Alison; Vecino-Ortiz, Andres I; Alfaro, Tania; Frenz, Patricia; Scholes, Shaun; Gonzalez, Silvia A; Margozzini, Paula; de Oliveira, Cesar; Sanchez Romero, Luz Maria; Alvarado, Andres; Cabrera, Sebastián; Sarmiento, Olga L; Triana, Camilo A; Barquera, Simón

    2017-09-15

    Comparability of population surveys across countries is key to appraising trends in population health. Achieving this requires deep understanding of the methods used in these surveys to examine the extent to which the measurements are comparable. In this study, we obtained detailed protocols of 8 nationally representative surveys from 2007-2013 from Brazil, Chile, Colombia, Mexico, the United Kingdom (England and Scotland), and the United States-countries that that differ in economic and inequity indicators. Data were collected on sampling frame, sample selection procedures, recruitment, data collection methods, content of interview and examination modules, and measurement protocols. We also assessed their adherence to the World Health Organization's "STEPwise Approach to Surveillance" framework for population health surveys. The surveys, which included half a million participants, were highly comparable on sampling methodology, survey questions, and anthropometric measurements. Heterogeneity was found for physical activity questionnaires and biological samples collection. The common age range included by the surveys was adults aged 18-64 years. The methods used in these surveys were similar enough to enable comparative analyses of the data across the 7 countries. This comparability is crucial in assessing and comparing national and subgroup population health, and to assisting the transfer of research and policy knowledge across countries. © The Author(s) 2017. Published by Oxford University Press on behalf of the Johns Hopkins Bloomberg School of Public Health. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  17. Prescription opioid use among addictions treatment patients: nonmedical use for pain relief vs. other forms of nonmedical use.

    Science.gov (United States)

    Bohnert, Amy S B; Eisenberg, Anna; Whiteside, Lauren; Price, Amanda; McCabe, Sean Esteban; Ilgen, Mark A

    2013-03-01

    Differences between those who engage in nonmedical prescription opioid use for reasons other than pain relief and those who engage in nonmedical use for reasons related to pain only are not well understood. Adults in a residential treatment program participated in a cross-sectional self-report survey. Participants reported whether they used opioids for reasons other than pain relief (e.g., help sleep, improve mood, or relieve stress). Within those with past-month nonmedical opioid use (n=238), logistic regression tested differences between those who reported use for reasons other than pain relief and those who did not. Nonmedical use of opioids for reasons other than pain relief was more common (66%) than nonmedical use for pain relief only (34%), and those who used for reasons other than pain relief were more likely to report heavy use (43% vs. 11%). Nonmedical use for reasons other than pain relief was associated with having a prior overdose (odds ratio [OR]=2.54, 95% CI: 1.36-4.74) and use of heroin (OR=4.08, 95% CI: 1.89-8.79), barbiturates (OR=6.44, 95% CI: 1.47, 28.11), and other sedatives (OR=5.80, 95% CI: 2.61, 12.87). Individuals who reported nonmedical use for reasons other than pain relief had greater depressive symptoms (13.1 vs. 10.5) and greater pain medication expectancies across all three domains (pleasure/social enhancement, pain reduction, negative experience reduction). Among patients in addictions treatment, individuals who report nonmedical use of prescription opioids for reasons other than pain relief represent an important clinical sub-group with greater substance use severity and poorer mental health functioning. Published by Elsevier Ltd.

  18. Survey of meshless and generalized finite element methods: A unified approach

    Science.gov (United States)

    Babuška, Ivo; Banerjee, Uday; Osborn, John E.

    In the past few years meshless methods for numerically solving partial differential equations have come into the focus of interest, especially in the engineering community. This class of methods was essentially stimulated by difficulties related to mesh generation. Mesh generation is delicate in many situations, for instance, when the domain has complicated geometry; when the mesh changes with time, as in crack propagation, and remeshing is required at each time step; when a Lagrangian formulation is employed, especially with nonlinear PDEs. In addition, the need for flexibility in the selection of approximating functions (e.g., the flexibility to use non-polynomial approximating functions), has played a significant role in the development of meshless methods. There are many recent papers, and two books, on meshless methods; most of them are of an engineering character, without any mathematical analysis.In this paper we address meshless methods and the closely related generalized finite element methods for solving linear elliptic equations, using variational principles. We give a unified mathematical theory with proofs, briefly address implementational aspects, present illustrative numerical examples, and provide a list of references to the current literature.The aim of the paper is to provide a survey of a part of this new field, with emphasis on mathematics. We present proofs of essential theorems because we feel these proofs are essential for the understanding of the mathematical aspects of meshless methods, which has approximation theory as a major ingredient. As always, any new field is stimulated by and related to older ideas. This will be visible in our paper.

  19. Methods and introductory results of the Greek national health and nutrition survey - HYDRIA

    Directory of Open Access Journals (Sweden)

    Georgia Martimianaki

    2018-06-01

    Full Text Available Background:  According to a large prospective cohort study (with baseline examination in the 1990s and smaller studies that followed, the population in Greece has been gradually deprived of the favorable morbidity and mortality indices recorded in the 1960s. The HYDRIA survey conducted in 2013-14 is the first nationally representative survey, which collected data related to the health and nutrition of the population in Greece. Methods: The survey sample consists of 4011 males (47% and females aged 18 years and over. Data collection included interviewer-administered questionnaires on personal characteristics, lifestyle choices, dietary habits and medical history; measurements of somatometry and blood pressure; and, blood drawing. Weighting factors were applied to ensure national representativeness of results. Results: Three out of five adults in Greece reported suffering of a chronic disease, with diabetes mellitus and chronic depression being the more frequent ones among older individuals. The population is also experiencing an overweight/obesity epidemic, since seven out of 10 adults are either overweight or obese. In addition, 40% of the population bears indications of hypertension. Smoking is still common and among women the prevalence was higher in younger age groups. Social disparities were observed in the prevalence of chronic diseases and mortality risk factors (hypertension, obesity, impaired lipid profile and high blood glucose levels. Conclusion: Excess body weight, hypertension, the smoking habit and the population’s limited physical activity are the predominant challenges that public health officials have to deal with in formulating policies and designing actions for the population in Greece.

  20. A review of neutron scattering correction for the calibration of neutron survey meters using the shadow cone method

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Sang In; Kim, Bong Hwan; Kim, Jang Lyul; Lee, Jung Il [Health Physics Team, Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2015-12-15

    The calibration methods of neutron-measuring devices such as the neutron survey meter have advantages and disadvantages. To compare the calibration factors obtained by the shadow cone method and semi-empirical method, 10 neutron survey meters of five different types were used in this study. This experiment was performed at the Korea Atomic Energy Research Institute (KAERI; Daejeon, South Korea), and the calibration neutron fields were constructed using a {sup 252}Californium ({sup 252}Cf) neutron source, which was positioned in the center of the neutron irradiation room. The neutron spectra of the calibration neutron fields were measured by a europium-activated lithium iodide scintillator in combination with KAERI's Bonner sphere system. When the shadow cone method was used, 10 single moderator-based survey meters exhibited a smaller calibration factor by as much as 3.1 - 9.3% than that of the semi-empirical method. This finding indicates that neutron survey meters underestimated the scattered neutrons and attenuated neutrons (i.e., the total scatter corrections). This underestimation of the calibration factor was attributed to the fact that single moderator-based survey meters have an under-ambient dose equivalent response in the thermal or thermal-dominant neutron field. As a result, when the shadow cone method is used for a single moderator-based survey meter, an additional correction and the International Organization for Standardization standard 8529-2 for room-scattered neutrons should be considered.

  1. A review of neutron scattering correction for the calibration of neutron survey meters using the shadow cone method

    International Nuclear Information System (INIS)

    Kim, Sang In; Kim, Bong Hwan; Kim, Jang Lyul; Lee, Jung Il

    2015-01-01

    The calibration methods of neutron-measuring devices such as the neutron survey meter have advantages and disadvantages. To compare the calibration factors obtained by the shadow cone method and semi-empirical method, 10 neutron survey meters of five different types were used in this study. This experiment was performed at the Korea Atomic Energy Research Institute (KAERI; Daejeon, South Korea), and the calibration neutron fields were constructed using a 252 Californium ( 252 Cf) neutron source, which was positioned in the center of the neutron irradiation room. The neutron spectra of the calibration neutron fields were measured by a europium-activated lithium iodide scintillator in combination with KAERI's Bonner sphere system. When the shadow cone method was used, 10 single moderator-based survey meters exhibited a smaller calibration factor by as much as 3.1 - 9.3% than that of the semi-empirical method. This finding indicates that neutron survey meters underestimated the scattered neutrons and attenuated neutrons (i.e., the total scatter corrections). This underestimation of the calibration factor was attributed to the fact that single moderator-based survey meters have an under-ambient dose equivalent response in the thermal or thermal-dominant neutron field. As a result, when the shadow cone method is used for a single moderator-based survey meter, an additional correction and the International Organization for Standardization standard 8529-2 for room-scattered neutrons should be considered

  2. Immediate pain relief by microvascular decompression for idiopathic trigeminal neuralagia

    International Nuclear Information System (INIS)

    Haq, N.U.; Ali, M.; Khan, H.M.; Ishaq, M.; Khattak, M.I.

    2016-01-01

    Background: Trigeminal neuralgia is a common entity which is managed by neurosurgeons in day to day practice. Up-till now many treatment options have been adopted for it but micro-vascular decompression is much impressive in terms of pain control and recurrence rate in all of them. The objective of study was known the efficacy of micro vascular decompression for idiopathic trigeminal neuralgia by using muscle patch in terms of immediate pain relief. Methods: This descriptive study was carried out in Neurosurgery Department lady reading hospital, Peshawar from January 2010 to December 2012. All patients who underwent micro vascular decompression for idiopathic trigeminal neuralgia were included in the study. Patients were assessed 72 hours after the surgery by borrow neurological institute pain scale (BNIP scale) for pain relief and findings were documented on predesigned proforma. Data was analysed by SPSS-17. Results: Total 52 patients were included in this study. Among these 32 (61.53 percentage) were female and 20 (38.46 percentage) were males having age from 22-76 years (mean 49 years). Right side was involved in 36 (69.23 percentage) and left side in 16 (30.76 percentage) patients. Duration of symptoms ranged from 6 months to 16 years (mean 8 years). History of dental extraction and peripheral neurectomy was present in 20 (38 percentage) and 3(5.76 percentage) patients while V3 was most commonly involved branch with 28(57.69 percentage) frequency and combined V2,V3 involvement was 1 (11.53 percentage). Superior cerebellar artery was most common offending vessel in 46(88.46 percentage) while arachnoid adhesions were in 2(3.84 percentage) patients. We assessed patient immediate postoperatively using BNIP pain scale. Conclusion: Micro-vascular decompression is most effective mode of treatment for trigeminal neuralgia in terms of immediate pain relief. (author)

  3. Technical errors in complete mouth radiographic survey according to radiographic techniques and film holding methods

    International Nuclear Information System (INIS)

    Choi, Karp Sik; Byun, Chong Soo; Choi, Soon Chul

    1986-01-01

    The purpose of this study was to investigate the numbers and causes of retakes in 300 complete mouth radiographic surveys made by 75 senior dental students. According to radiographic techniques and film holding methods, they were divided into 4 groups: Group I: Bisecting-angle technique with patient's fingers. Group II: Bisecting-angle technique with Rinn Snap-A-Ray device. Group III: Bisecting-angle technique with Rinn XCP instrument (short cone) Group IV: Bisecting-angle technique with Rinn XCP instrument (long cone). The most frequent cases of retakes, the most frequent tooth area examined, of retakes and average number of retakes per complete mouth survey were evaluated. The obtained results were as follows: Group I: Incorrect film placement (47.8), upper canine region, and 0.89. Group II: Incorrect film placement (44.0), upper canine region, and 1.12. Group III: Incorrect film placement (79.2), upper canine region, and 2.05. Group IV: Incorrect film placement (67.7), upper canine region, and 1.69.

  4. Use of methods for specifying the target difference in randomised controlled trial sample size calculations: Two surveys of trialists' practice.

    Science.gov (United States)

    Cook, Jonathan A; Hislop, Jennifer M; Altman, Doug G; Briggs, Andrew H; Fayers, Peter M; Norrie, John D; Ramsay, Craig R; Harvey, Ian M; Vale, Luke D

    2014-06-01

    Central to the design of a randomised controlled trial (RCT) is a calculation of the number of participants needed. This is typically achieved by specifying a target difference, which enables the trial to identify a difference of a particular magnitude should one exist. Seven methods have been proposed for formally determining what the target difference should be. However, in practice, it may be driven by convenience or some other informal basis. It is unclear how aware the trialist community is of these formal methods or whether they are used. To determine current practice regarding the specification of the target difference by surveying trialists. Two surveys were conducted: (1) Members of the Society for Clinical Trials (SCT): participants were invited to complete an online survey through the society's email distribution list. Respondents were asked about their awareness, use of, and willingness to recommend methods; (2) Leading UK- and Ireland-based trialists: the survey was sent to UK Clinical Research Collaboration registered Clinical Trials Units, Medical Research Council UK Hubs for Trial Methodology Research, and the Research Design Services of the National Institute for Health Research. This survey also included questions about the most recent trial developed by the respondent's group. Survey 1: Of the 1182 members on the SCT membership email distribution list, 180 responses were received (15%). Awareness of methods ranged from 69 (38%) for health economic methods to 162 (90%) for pilot study. Willingness to recommend among those who had used a particular method ranged from 56% for the opinion-seeking method to 89% for the review of evidence-base method. Survey 2: Of the 61 surveys sent out, 34 (56%) responses were received. Awareness of methods ranged from 33 (97%) for the review of evidence-base and pilot methods to 14 (41%) for the distribution method. The highest level of willingness to recommend among users was for the anchor method (87%). Based upon

  5. The discussion of method for survey the radiosensitivity of human glioma cell line SHG-44

    International Nuclear Information System (INIS)

    Li Li; Xu Changshao; Zhou Juying; Xu Xiaoting; Luo Jialin

    2005-01-01

    Objective: To investigate if thiazolyl blue colorimetric assay (MTT) and cell counting kit-8 (CCK-8) can replace clone forming assay for survey the radiosensitivity of SHG-44. Methods; Three assays was applied to examine the growth inhibition of human glioma cell line SHG-44 in eight dose groups of 0, 1, 2, 3, 4, 6, 8 and 10 Gy, and statistical research was applied to analyze the correlation between survival fraction and various doses. Results: Dose was associated with survival fraction in these three assays at some range of irradiation doseage (dose≤3 Gy). If out of the range, the relation is poor. CCK-8 has no rather superiority than MTT. Conclusion: By now clone forming assay is still the 'gold standard'. In some cases, MTT and other assays can give us some reference, but these assays still can not replace clone forming assay. (authors)

  6. Application of Classical Land Surveying Measurement Methods for Determining the Vertical Displacement of Railway Bridges

    Science.gov (United States)

    Gawronek, Pelagia; Makuch, Maria

    2017-12-01

    The classical measurements of stability of railway bridge, in the context of determining the vertical displacements of the object, consisted on precise leveling of girders and trigonometric leveling of controlled points (fixed into girders' surface). The construction elements, which were measured in two ways, in real terms belonged to the same vertical planes. Altitude measurements of construction were carried out during periodic structural stability tests and during static load tests of bridge by train. The specificity of displacement measurements, the type of measured object and the rail land surveying measurement conditions were determinants to define methodology of altitude measurement. The article presents compatibility of vertical displacements of steel railway bridge, which were developed in two measurement methods. In conclusion, the authors proposed the optimum concept of determining the vertical displacements of girders by using precise and trigonometric leveling (in terms of accuracy, safety and economy of measurement).

  7. Application of Classical Land Surveying Measurement Methods for Determining the Vertical Displacement of Railway Bridges

    Directory of Open Access Journals (Sweden)

    Gawronek Pelagia

    2017-12-01

    Full Text Available The classical measurements of stability of railway bridge, in the context of determining the vertical displacements of the object, consisted on precise leveling of girders and trigonometric leveling of controlled points (fixed into girders' surface. The construction elements, which were measured in two ways, in real terms belonged to the same vertical planes. Altitude measurements of construction were carried out during periodic structural stability tests and during static load tests of bridge by train. The specificity of displacement measurements, the type of measured object and the rail land surveying measurement conditions were determinants to define methodology of altitude measurement. The article presents compatibility of vertical displacements of steel railway bridge, which were developed in two measurement methods. In conclusion, the authors proposed the optimum concept of determining the vertical displacements of girders by using precise and trigonometric leveling (in terms of accuracy, safety and economy of measurement.

  8. South America, Shaded Relief and Colored Height

    Science.gov (United States)

    2003-01-01

    This image of South America was generated with data from the Shuttle Radar Topography Mission (SRTM). For this broad view the resolution of the data was first reduced to 30 arcseconds (about 928 meters north-south but variable east-west), matching the best previously existing global digital topographic data set called GTOPO30. The data were then resampled to a Mercator projection with approximately square pixels (about one kilometer, or 0.6 miles, on each side). Even at this decreased resolution the variety of landforms comprising the South American continent is readily apparent.Topographic relief in South America is dominated by the Andes Mountains, which extend all along the Pacific Coast. These mountains are created primarily by the convergence of the Nazca and South American tectonic plates. The Nazca Plate, which underlies the eastern Pacific Ocean, slides under western South America resulting in crustal thickening, uplift, and volcanism. Another zone of plate convergence occurs along the northwestern coast of South America where the Caribbean Plate also slides under the South American Plate and forms the northeastern extension of the Andes Mountains.East of the Andes, much of northern South America drains into the Amazon River, the world's largest river in terms of both watershed area and flow volume. Topographic relief is very low in much of the Amazon Basin but SRTM data provide an excellent detailed look at the basin's three-dimensional drainage pattern, including the geologic structural trough (syncline) that hosts the eastern river channel.North of the Amazon, the Guiana Highlands commonly stand in sharp contrast to the surrounding lowlands, indeed hosting the world's tallest waterfall, Angel Falls (979 meters or 3212 feet). Folded and fractured bedrock structures are distinctive in the topographic pattern.South of the Amazon, the Brazilian Highlands show a mix of landforms, including some broad areas of consistent topographic patterns that indicate the

  9. A Survey of tooth morphology teaching methods employed in the United Kingdom and Ireland.

    Science.gov (United States)

    Lone, M; McKenna, J P; Cryan, J F; Downer, E J; Toulouse, A

    2018-01-15

    Tooth morphology is a central component of the dental curriculum and is applicable to all dental specialities. Traditional teaching methods are being supplemented with innovative strategies to tailor teaching and accommodate the learning styles of the recent generation of students. An online survey was compiled and distributed to the staff involved in teaching tooth morphology in the United Kingdom and Ireland to assess the importance of tooth morphology in the dentistry curriculum and the methodologies employed in teaching. The results of the survey show that tooth morphology constitutes a small module in the dental curriculum. It is taught in the first 2 years of the dental curriculum but is applicable in the clinical years and throughout the dental career. Traditional teaching methods, lecture and practical, are being augmented with innovative teaching including e-learning via virtual learning environment, tooth atlas and e-books leading to blended learning. The majority of the schools teach both normal dental anatomy and morphologic variations of dental anatomy and utilise plastic teeth for practical and examination purposes. Learning the 3D aspects of tooth morphology was deemed important by most of the respondents who also agreed that tooth morphology is a difficult topic for the students. Despite being core to the dental curriculum, overall minimal time is dedicated to the delivery of tooth morphology, creating a reliance on the student to learn the material. New forms of delivery including computer-assisted learning tools should help sustain learning and previously acquired knowledge. © 2018 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  10. Fluid-structure interaction dynamic simulation of spring-loaded pressure relief valves under seismic wave

    Science.gov (United States)

    Lv, Dongwei; Zhang, Jian; Yu, Xinhai

    2018-05-01

    In this paper, a fluid-structure interaction dynamic simulation method of spring-loaded pressure relief valve was established. The dynamic performances of the fluid regions and the stress and strain of the structure regions were calculated at the same time by accurately setting up the contact pairs between the solid parts and the coupling surfaces between the fluid regions and the structure regions. A two way fluid-structure interaction dynamic simulation of a simplified pressure relief valve model was carried out. The influence of vertical sinusoidal seismic waves on the performance of the pressure relief valve was preliminarily investigated by loading sine waves. Under vertical seismic waves, the pressure relief valve will flutter, and the reseating pressure was affected by the amplitude and frequency of the seismic waves. This simulation method of the pressure relief valve under vertical seismic waves can provide effective means for investigating the seismic performances of the valves, and make up for the shortcomings of the experiment.

  11. Dark Energy Survey Year 1 results: cross-correlation redshifts - methods and systematics characterization

    Science.gov (United States)

    Gatti, M.; Vielzeuf, P.; Davis, C.; Cawthon, R.; Rau, M. M.; DeRose, J.; De Vicente, J.; Alarcon, A.; Rozo, E.; Gaztanaga, E.; Hoyle, B.; Miquel, R.; Bernstein, G. M.; Bonnett, C.; Carnero Rosell, A.; Castander, F. J.; Chang, C.; da Costa, L. N.; Gruen, D.; Gschwend, J.; Hartley, W. G.; Lin, H.; MacCrann, N.; Maia, M. A. G.; Ogando, R. L. C.; Roodman, A.; Sevilla-Noarbe, I.; Troxel, M. A.; Wechsler, R. H.; Asorey, J.; Davis, T. M.; Glazebrook, K.; Hinton, S. R.; Lewis, G.; Lidman, C.; Macaulay, E.; Möller, A.; O'Neill, C. R.; Sommer, N. E.; Uddin, S. A.; Yuan, F.; Zhang, B.; Abbott, T. M. C.; Allam, S.; Annis, J.; Bechtol, K.; Brooks, D.; Burke, D. L.; Carollo, D.; Carrasco Kind, M.; Carretero, J.; Cunha, C. E.; D'Andrea, C. B.; DePoy, D. L.; Desai, S.; Eifler, T. F.; Evrard, A. E.; Flaugher, B.; Fosalba, P.; Frieman, J.; García-Bellido, J.; Gerdes, D. W.; Goldstein, D. A.; Gruendl, R. A.; Gutierrez, G.; Honscheid, K.; Hoormann, J. K.; Jain, B.; James, D. J.; Jarvis, M.; Jeltema, T.; Johnson, M. W. G.; Johnson, M. D.; Krause, E.; Kuehn, K.; Kuhlmann, S.; Kuropatkin, N.; Li, T. S.; Lima, M.; Marshall, J. L.; Melchior, P.; Menanteau, F.; Nichol, R. C.; Nord, B.; Plazas, A. A.; Reil, K.; Rykoff, E. S.; Sako, M.; Sanchez, E.; Scarpine, V.; Schubnell, M.; Sheldon, E.; Smith, M.; Smith, R. C.; Soares-Santos, M.; Sobreira, F.; Suchyta, E.; Swanson, M. E. C.; Tarle, G.; Thomas, D.; Tucker, B. E.; Tucker, D. L.; Vikram, V.; Walker, A. R.; Weller, J.; Wester, W.; Wolf, R. C.

    2018-06-01

    We use numerical simulations to characterize the performance of a clustering-based method to calibrate photometric redshift biases. In particular, we cross-correlate the weak lensing source galaxies from the Dark Energy Survey Year 1 sample with redMaGiC galaxies (luminous red galaxies with secure photometric redshifts) to estimate the redshift distribution of the former sample. The recovered redshift distributions are used to calibrate the photometric redshift bias of standard photo-z methods applied to the same source galaxy sample. We apply the method to two photo-z codes run in our simulated data: Bayesian Photometric Redshift and Directional Neighbourhood Fitting. We characterize the systematic uncertainties of our calibration procedure, and find that these systematic uncertainties dominate our error budget. The dominant systematics are due to our assumption of unevolving bias and clustering across each redshift bin, and to differences between the shapes of the redshift distributions derived by clustering versus photo-zs. The systematic uncertainty in the mean redshift bias of the source galaxy sample is Δz ≲ 0.02, though the precise value depends on the redshift bin under consideration. We discuss possible ways to mitigate the impact of our dominant systematics in future analyses.

  12. Optimizing Methods of Obtaining Stellar Parameters for the H3 Survey

    Science.gov (United States)

    Ivory, KeShawn; Conroy, Charlie; Cargile, Phillip

    2018-01-01

    The Stellar Halo at High Resolution with Hectochelle Survey (H3) is in the process of observing and collecting stellar parameters for stars in the Milky Way's halo. With a goal of measuring radial velocities for fainter stars, it is crucial that we have optimal methods of obtaining this and other parameters from the data from these stars.The method currently developed is The Payne, named after Cecilia Payne-Gaposchkin, a code that uses neural networks and Markov Chain Monte Carlo methods to utilize both spectra and photometry to obtain values for stellar parameters. This project was to investigate the benefit of fitting both spectra and spectral energy distributions (SED). Mock spectra using the parameters of the Sun were created and noise was inserted at various signal to noise values. The Payne then fit each mock spectrum with and without a mock SED also generated from solar parameters. The result was that at high signal to noise, the spectrum dominated and the effect of fitting the SED was minimal. But at low signal to noise, the addition of the SED greatly decreased the standard deviation of the data and resulted in more accurate values for temperature and metallicity.

  13. Contraception coverage and methods used among women in South Africa: A national household survey

    Directory of Open Access Journals (Sweden)

    M F Chersich

    2017-04-01

    Full Text Available Background. Globally, family planning services are being strengthened and the range of contraceptive choices expanded. Data on contraceptive coverage and service gaps could help to shape these initiatives. Objective. To assess contraception coverage in South Africa (SA and identify underserved populations and aspects of programming that require strengthening. Methods. Data from a 2012 SA household survey assessed contraception coverage among 6 296 women aged 15 - 49 years and identified underserved populations. Results. Two-thirds had an unintended pregnancy in the past 5 years, a quarter of which were contraceptive failures. Most knew of injectable (92.0% and oral contraception (89.9%, but fewer of intrauterine devices (56.1% and emergency contraception (47.3%. Contraceptive prevalence was 49.1%, and 41.8% women used modern non-barrier methods. About half had ever used injectable contraception. Contraception was lower in black Africans and younger women, who used a limited range of methods. Conclusion. Contraception coverage is higher than many previous estimates. Rates of unintended pregnancy, contraceptive failure and knowledge gaps, however, demonstrate high levels of unmet need, especially among black Africans and young women.

  14. Vision and Control for UAVs: A Survey of General Methods andof Inexpensive Platforms for Infrastructure Inspection

    Directory of Open Access Journals (Sweden)

    Koppány Máthé

    2015-06-01

    Full Text Available Unmanned aerial vehicles (UAVs have gained significant attention in recent years. Low-cost platforms using inexpensive sensor payloads have been shown to provide satisfactory flight and navigation capabilities. In this report, we survey vision and control methods that can be applied to low-cost UAVs, and we list some popular inexpensive platforms and application fields where they are useful. We also highlight the sensor suites used where this information is available. We overview, among others, feature detection and tracking, optical flow and visual servoing, low-level stabilization and high-level planning methods. We then list popular low-cost UAVs, selecting mainly quadrotors. We discuss applications, restricting our focus to the field of infrastructure inspection. Finally, as an example, we formulate two use-cases for railway inspection, a less explored application field, and illustrate the usage of the vision and control techniques reviewed by selecting appropriate ones to tackle these use-cases. To select vision methods, we run a thorough set of experimental evaluations.

  15. A Study for Optimum Survey Method of Underwater Structure Using the Dual Sonar Sensor

    Directory of Open Access Journals (Sweden)

    Youngseok Kim

    2017-01-01

    Full Text Available We have developed dual sonar equipment and an improved operating method for improving resolution in order to solve the problems of limitations of the optical equipment and the application method of SSS (side scan sonar in the investigation of damage of underwater structures. We analyzed the influence factors of the resolution of sonar data through the comparison of resolution and data quality in indoor test. Also we confirmed the problems about the overlapping area of the dual sonar. Depth and distance were analyzed as major influencing factors for survey angle. Specimens were scanned while adjusting distance and towfish angle according to depth change in order to verify applicability of the developed dual sonar in the field experiment. Optimal resolution was found to be 3 cm in specimen spacing, and 20 sample data items were extracted. We developed the regression model based on the multiple regression analysis and developed the RealDualSONAR-DAQ tool, the dual sonar optimum operating method program based on proposed correlation equations. We can use the developed tools to get the value of the major influencing factors for dual sonar operation and obtain high quality sonar data to analyze damage of underwater structures.

  16. Wet treatment of ashes, a survey of methods; Vaat rening av askor, metodoeversikt

    Energy Technology Data Exchange (ETDEWEB)

    Bjurstroem, Henrik [AaF-Energi och Miljoe AB, Stockhom (Sweden); Steenari, Britt-Marie [Chalmers Univ. of Technology, Goeteborg (Sweden)

    2003-10-01

    Ash contains elements and compounds that are questionable from an environmental point of view, such as very soluble salts, alkali yielding a high pH-value, metals, heavy metals and organic compounds. When ash is to be used, one requires that it is stable, i. e. that it does not influence the immediate surroundings and the environment in a negative way. Stability means that water that comes into contact with ash shall not pick up environmentally disruptive compounds to any significant extent. The presence of heavy metals in the ash does not always lead to their being leached to the surroundings, but it does always imply an uncertainty. It is probable that fly ash from incineration of municipal solid waste has to be treated in some way before it is landfilled. Washing the ash or dissolving it partially with a solvent such as water or an acid is a relatively simple method to reduce the risk for contamination of the environment by removing soluble compounds from the ash. Such methods consist of techniques that in other applications are proven and robust, and that may be adapted to the present conditions: the composition and the properties of the ash. In this report, a survey of methods is presented. Wet treatments may be apprehended as a combined separation and concentration process: on the one hand environmentally disruptive compounds are removed from ash, on the other hand these are concentrated in a remainder survival remission rate. These methods are a perfect pretreatment for various stabilization methods, a. o. thermal treatments such as vitrifying or sintering, or for utilization of the ashes e. g. in public works as they remove the obstacles to a good performance, namely the soluble salts. In this report are presented a systematic description of wet treatments aiming at purification and a survey of methods of industrial interest. A certain number of wet treatment methods are in operation outside Sweden, principally for fly ash from municipal solid waste

  17. Have "new" methods in medical education reached German-speaking Central Europe: a survey.

    Science.gov (United States)

    Fandler, Martin; Habersack, Marion; Dimai, Hans P

    2014-08-16

    Simulation-based-training (SBT) in the education of health professionals is discussed as an effective alternative for knowledge and skills enhancement as well as for the establishment of a secure learning environment, for learners and patients. In the Anglo-American region, SBT and simulation and training centers (STC) are numbered as standard for medical training. In German-speaking Central Europe, priority is still given to the establishment of SBT and STC. The purpose of this study was (i) to survey the status quo relating to the existence and facilities of simulation and training centers at medical universities in German-speaking Central Europe and (ii) the evaluation of training methods, especially in the area of emergency medicine skills. All public and private medical universities or medical faculties in Germany (36), Austria (4) and German-speaking Switzerland (3) were interviewed. In the survey, information regarding the existence and facilities of STCs and information with regards to the use of SBT in the area of emergency medicine was requested. The questions were partly posed in a closed-ended-, in an open-ended- and in a multiple choice format (with the possibility of selecting more than one answer). Of a total of 43 contacted medical universities/medical faculties, 40 ultimately participated in the survey. As decisive for the establishment of a STC the potential to improve the clinical-practical training and the demand by students were listed. Obligatory training in a STC during the first and sixth academic year was confirmed only by 12 institutions, before the first invasive procedure on patients by 17 institutions. 13 institutions confirmed the use of the STC for the further training of physicians and care-staff. Training for the acute care and emergency medicine skills in the field of pediatrics, for the most part, occurs decentralized. New methods in medical training have reached German-speaking Central Europe, but the simulation and training

  18. Acupuncture as pain relief during delivery: a randomized controlled trial

    DEFF Research Database (Denmark)

    Borup, Lissa; Wurlitzer, Winnie; Hedegaard, Morten

    2009-01-01

    BACKGROUND: Many women need some kind of analgesic treatment to relieve pain during childbirth. The objective of our study was to compare the effect of acupuncture with transcutaneous electric nerve stimulation (TENS) and traditional analgesics for pain relief and relaxation during delivery...... with respect to pain intensity, birth experience, and obstetric outcome. METHODS: A randomized controlled trial was conducted with 607 healthy women in labor at term who received acupuncture, TENS, or traditional analgesics. Primary outcomes were the need for pharmacological and invasive methods, level of pain...... with the intention-to-treat principle. RESULTS: Use of pharmacological and invasive methods was significantly lower in the acupuncture group (acupuncture vs traditional, p acupuncture vs TENS, p = 0.031). Pain scores were comparable. Acupuncture did not influence the duration of labor or the use of oxytocin...

  19. A survey on the human reliability analysis methods for the design of Korean next generation reactor

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Yong Hee; Lee, J. W.; Park, J. C.; Kwack, H. Y.; Lee, K. Y.; Park, J. K.; Kim, I. S.; Jung, K. W

    2000-03-01

    Enhanced features through applying recent domestic technologies may characterize the safety and efficiency of KNGR(Korea Next Generation Reactor). Human engineered interface and control room environment are expected to be beneficial to the human aspects of KNGR design. However, since the current method for human reliability analysis is not up to date after THERP/SHARP, it becomes hard to assess the potential of human errors due to both of the positive and negative effect of the design changes in KNGR. This is a state of the art report on the human reliability analysis methods that are potentially available for the application to the KNGR design. We surveyed every technical aspects of existing HRA methods, and compared them in order to obtain the requirements for the assessment of human error potentials within KNGR design. We categorized the more than 10 methods into the first and the second generation according to the suggestion of Dr. Hollnagel. THERP was revisited in detail. ATHEANA proposed by US NRC for an advanced design and CREAM proposed by Dr. Hollnagel were reviewed and compared. We conclude that the key requirements might include the enhancement in the early steps for human error identification and the quantification steps with considerations of more extended error shaping factors over PSFs(performance shaping factors). The utilization of the steps and approaches of ATHEANA and CREAM will be beneficial to the attainment of an appropriate HRA method for KNGR. However, the steps and data from THERP will be still maintained because of the continuity with previous PSA activities in KNGR design.

  20. A survey on the human reliability analysis methods for the design of Korean next generation reactor

    International Nuclear Information System (INIS)

    Lee, Yong Hee; Lee, J. W.; Park, J. C.; Kwack, H. Y.; Lee, K. Y.; Park, J. K.; Kim, I. S.; Jung, K. W.

    2000-03-01

    Enhanced features through applying recent domestic technologies may characterize the safety and efficiency of KNGR(Korea Next Generation Reactor). Human engineered interface and control room environment are expected to be beneficial to the human aspects of KNGR design. However, since the current method for human reliability analysis is not up to date after THERP/SHARP, it becomes hard to assess the potential of human errors due to both of the positive and negative effect of the design changes in KNGR. This is a state of the art report on the human reliability analysis methods that are potentially available for the application to the KNGR design. We surveyed every technical aspects of existing HRA methods, and compared them in order to obtain the requirements for the assessment of human error potentials within KNGR design. We categorized the more than 10 methods into the first and the second generation according to the suggestion of Dr. Hollnagel. THERP was revisited in detail. ATHEANA proposed by US NRC for an advanced design and CREAM proposed by Dr. Hollnagel were reviewed and compared. We conclude that the key requirements might include the enhancement in the early steps for human error identification and the quantification steps with considerations of more extended error shaping factors over PSFs(performance shaping factors). The utilization of the steps and approaches of ATHEANA and CREAM will be beneficial to the attainment of an appropriate HRA method for KNGR. However, the steps and data from THERP will be still maintained because of the continuity with previous PSA activities in KNGR design

  1. A survey of variable selection methods in two Chinese epidemiology journals

    Directory of Open Access Journals (Sweden)

    Lynn Henry S

    2010-09-01

    Full Text Available Abstract Background Although much has been written on developing better procedures for variable selection, there is little research on how it is practiced in actual studies. This review surveys the variable selection methods reported in two high-ranking Chinese epidemiology journals. Methods Articles published in 2004, 2006, and 2008 in the Chinese Journal of Epidemiology and the Chinese Journal of Preventive Medicine were reviewed. Five categories of methods were identified whereby variables were selected using: A - bivariate analyses; B - multivariable analysis; e.g. stepwise or individual significance testing of model coefficients; C - first bivariate analyses, followed by multivariable analysis; D - bivariate analyses or multivariable analysis; and E - other criteria like prior knowledge or personal judgment. Results Among the 287 articles that reported using variable selection methods, 6%, 26%, 30%, 21%, and 17% were in categories A through E, respectively. One hundred sixty-three studies selected variables using bivariate analyses, 80% (130/163 via multiple significance testing at the 5% alpha-level. Of the 219 multivariable analyses, 97 (44% used stepwise procedures, 89 (41% tested individual regression coefficients, but 33 (15% did not mention how variables were selected. Sixty percent (58/97 of the stepwise routines also did not specify the algorithm and/or significance levels. Conclusions The variable selection methods reported in the two journals were limited in variety, and details were often missing. Many studies still relied on problematic techniques like stepwise procedures and/or multiple testing of bivariate associations at the 0.05 alpha-level. These deficiencies should be rectified to safeguard the scientific validity of articles published in Chinese epidemiology journals.

  2. Getting from neuron to checkmark: Models and methods in cognitive survey research

    NARCIS (Netherlands)

    Holleman, B.C.; Murre, J.M.J.

    2008-01-01

    Since the 1980s much work has been done in the field of Cognitive Survey Research. In an interdisciplinary endeavour, survey methodologists and cognitive psychologists (as well as social psychologists and linguists) have worked to unravel the cognitive processes underlying survey responses: to

  3. Internet, Phone, Mail, and Mixed-Mode Surveys: The Tailored Design Method, 4th Edition

    Science.gov (United States)

    Dillman, Don A.; Smyth, Jolene D.; Christian, Lean Melani

    2014-01-01

    For over two decades, Dillman's classic text on survey design has aided both students and professionals in effectively planning and conducting mail, telephone, and, more recently, Internet surveys. The new edition is thoroughly updated and revised, and covers all aspects of survey research. It features expanded coverage of mobile phones, tablets,…

  4. Strapdown Airborne Gravimetry Quality Assessment Method Based on Single Survey Line Data: A Study by SGA-WZ02 Gravimeter

    Science.gov (United States)

    Wu, Meiping; Cao, Juliang; Zhang, Kaidong; Cai, Shaokun; Yu, Ruihang

    2018-01-01

    Quality assessment is an important part in the strapdown airborne gravimetry. Root mean square error (RMSE) evaluation method is a classical way to evaluate the gravimetry quality, but classical evaluation methods are preconditioned by extra flight or reference data. Thus, a method, which is able to largely conquer the premises of classical quality assessment methods and can be used in single survey line, has been developed in this paper. According to theoretical analysis, the method chooses the stability of two horizontal attitude angles, horizontal specific force and vertical specific force as the determinants of quality assessment method. The actual data, collected by SGA-WZ02 from 13 flights 21 lines in certain survey, was used to build the model and elaborate the method. To substantiate the performance of the quality assessment model, the model is applied in extra repeat line flights from two surveys. Compared with internal RMSE, standard deviation of assessment residuals are 0.23 mGal and 0.16 mGal in two surveys, which shows that the quality assessment method is reliable and stricter. The extra flights are not necessary by specially arranging the route of flights. The method, summarized from SGA-WZ02, is a feasible approach to assess gravimetry quality using single line data and is also suitable for other strapdown gravimeters. PMID:29373535

  5. LOFT pressurizer safety: relief valve reliability

    International Nuclear Information System (INIS)

    Brown, E.S.

    1978-01-01

    The LOFT pressurizer self-actuating safety-relief valves are constructed to the present state-of-the-art and should have reliability equivalent to the valves in use on PWR plants in the U.S. There have been no NRC incident reports on valve failures to lift that would challenge the Technical Specification Safety Limit. Fourteen valves have been reported as lifting a few percentage points outside the +-1% Tech. Spec. surveillance tolerance (9 valves tested over and 5 valves tested under specification). There have been no incident reports on failures to reseat. The LOFT surveillance program for assuring reliability is equivalent to nuclear industry practice

  6. LOFT pressurizer safety: relief valve reliability

    Energy Technology Data Exchange (ETDEWEB)

    Brown, E.S.

    1978-01-18

    The LOFT pressurizer self-actuating safety-relief valves are constructed to the present state-of-the-art and should have reliability equivalent to the valves in use on PWR plants in the U.S. There have been no NRC incident reports on valve failures to lift that would challenge the Technical Specification Safety Limit. Fourteen valves have been reported as lifting a few percentage points outside the +-1% Tech. Spec. surveillance tolerance (9 valves tested over and 5 valves tested under specification). There have been no incident reports on failures to reseat. The LOFT surveillance program for assuring reliability is equivalent to nuclear industry practice.

  7. Targinact--opioid pain relief without constipation?

    Science.gov (United States)

    2010-12-01

    Targinact (Napp Pharmaceuticals Ltd) is a modified-release combination product containing the strong opioid oxycodone plus the opioid antagonist naloxone. It is licensed for "severe pain, which can be adequately managed only with opioid analgesics".1 The summary of product characteristics (SPC) states that "naloxone is added to counteract opioid-induced constipation by blocking the action of oxycodone at opioid receptors locally in the gut". Advertising for the product claims "better pain relief", "superior GI [gastrointestinal] tolerability" and "improved quality of life" "compared to previous treatment in a clinical practice study (n=7836)". Here we consider whether Targinact offers advantages over using strong opioids plus laxatives where required.

  8. [Body integrity identity disorder, relief after amputation].

    Science.gov (United States)

    Blom, R M; Braam, A W; de Boer-Kreeft, N; Sonnen, M P A M

    2014-01-01

    Body integrity identity disorder (BIID) is a rare condition in which a person, for no apparent physical reason, is tormented by the experience that a body-part, such as a limb, does not really belong to the body. Patients experience an intense desire for the limb to be amputated (a 'desire' formerly referred to as 'apotemnophilia'). We report on a 58-year-old male patient with BIID who froze one of his legs so that he could amputate it himself. A surgeon ultimately intervened and amputated the leg professionally. The patient was extremely relieved and was still experiencing relief at a follow-up three years later.

  9. Relief-oriented use of marijuana by teens

    Directory of Open Access Journals (Sweden)

    Johnson Joy L

    2009-04-01

    Full Text Available Abstract Background There are indications that marijuana is increasingly used to alleviate symptoms and for the treatment of a variety of medical conditions both physical and psychological. The purpose of this study was to describe the health concerns and problems that prompt some adolescents to use marijuana for therapeutic reasons, and their beliefs about the risks and benefits of the therapeutic use of marijuana. Methods As part of a larger ethnographic study of 63 adolescents who were regular marijuana users, we analyzed interviews conducted with 20 youth who self-identified as using marijuana to relieve or manage health problems. Results Thematic analysis revealed that these teens differentiated themselves from recreational users and positioned their use of marijuana for relief by emphasizing their inability to find other ways to deal with their health problems, the sophisticated ways in which they titrated their intake, and the benefits that they experienced. These teens used marijuana to gain relief from difficult feelings (including depression, anxiety and stress, sleep difficulties, problems with concentration and physical pain. Most were not overly concerned about the risks associated with using marijuana, maintaining that their use of marijuana was not 'in excess' and that their use fit into the realm of 'normal.' Conclusion Marijuana is perceived by some teens to be the only available alternative for teens experiencing difficult health problems when medical treatments have failed or when they lack access to appropriate health care.

  10. Pain relief in childbirth: changing historical and feminist perspectives.

    Science.gov (United States)

    Skowronski, G A

    2015-07-01

    Pain during human childbirth is ubiquitous and severe. Opium and its derivatives constitute the oldest effective method of pain relief and have been used in childbirth for several thousand years, along with numerous folk medicines and remedies. Interference with childbirth pain has always been criticised by doctors and clergy. The 19th century saw the introduction of three much more effective approaches to childbirth pain; diethyl ether, chloroform and nitrous oxide. Access to pain relief was demanded by the first wave of feminist activists as a woman's right. They popularised the use of 'twilight sleep', a combination of morphine and scopolamine, which fell into disrepute as its adverse effects became known. From the 1960s, as epidural analgesia became more popular, a second wave of feminists took the opposite position, calling for a return to non-medicalised, female-controlled, 'natural' childbirth and, in some cases, valorising the importance of the pain experience as empowering for women. However, from the 1990s, a third wave of feminist thought has begun to emerge, revalidating a woman's right to choose a 'technological', pain-free birth, rather than a 'natural' one, and regarding this as a legitimate feminist position.

  11. Web-based surveys as an alternative to traditional mail methods.

    Science.gov (United States)

    Fleming, Christopher M; Bowden, Mark

    2009-01-01

    Environmental economists have long used surveys to gather information about people's preferences. A recent innovation in survey methodology has been the advent of web-based surveys. While the Internet appears to offer a promising alternative to conventional survey administration modes, concerns exist over potential sampling biases associated with web-based surveys and the effect these may have on valuation estimates. This paper compares results obtained from a travel cost questionnaire of visitors to Fraser Island, Australia, that was conducted using two alternate survey administration modes; conventional mail and web-based. It is found that response rates and the socio-demographic make-up of respondents to the two survey modes are not statistically different. Moreover, both modes yield similar consumer surplus estimates.

  12. Olduvai Gorge, Shaded Relief and Colored Height

    Science.gov (United States)

    2004-01-01

    Three striking and important areas of Tanzania in eastern Africa are shown in this color-coded shaded relief image from the Shuttle Radar Topography Mission. The largest circular feature in the center right is the caldera, or central crater, of the extinct volcano Ngorongoro. It is surrounded by a number of smaller volcanoes, all associated with the Great Rift Valley, a geologic fault system that extends for about 4,830 kilometers (2,995 miles) from Syria to central Mozambique. Ngorongoro's caldera is 22.5 kilometers (14 miles) across at its widest point and is 610 meters (2,000 feet) deep. Its floor is very level, holding a lake fed by streams running down the caldera wall. It is part of the Ngorongoro Conservation Area and is home to over 75,000 animals. The lakes south of the crater are Lake Eyasi and Lake Manyara, also part of the conservation area. The relatively smooth region in the upper left of the image is the Serengeti National Park, the largest in Tanzania. The park encompasses the main part of the Serengeti ecosystem, supporting the greatest remaining concentration of plains game in Africa including more than 3,000,000 large mammals. The animals roam the park freely and in the spectacular migrations, huge herds of wild animals move to other areas of the park in search of greener grazing grounds (requiring over 4,000 tons of grass each day) and water. The faint, nearly horizontal line near the center of the image is Olduvai Gorge, made famous by the discovery of remains of the earliest humans to exist. Between 1.9 and 1.2 million years ago a salt lake occupied this area, followed by the appearance of fresh water streams and small ponds. Exposed deposits show rich fossil fauna, many hominid remains and items belonging to one of the oldest stone tool technologies, called Olduwan. The time span of the objects recovered dates from 2,100,000 to 15,000 years ago. Two visualization methods were combined to produce the image: shading and color coding of

  13. Soil surveying using electromagnetic methods; Denji tansaho wo mochiita jiban chosa

    Energy Technology Data Exchange (ETDEWEB)

    Suzuki, I; Kawauchi, K; Goto, N [Muroran Institute of Technology, Hokkaido (Japan); Takahashi, N; Yamada, T [Zukohsya Co. Ltd., Hokkaido (Japan)

    1997-10-22

    Electromagnetic surveying method is applied in Muroran Institute of Technology`s site for power transmission steel towers for the locating of structures buried in the ground and for the study of obstruction to the application of the method. The devices employed are the EM31 and EM38 which are portable conductivity measuring instruments manufactured by GEONICS Company. With the probeable depth in the horizontal dipole mode being approximately half that in the vertical dipole mode, depths of 0.5m, 1m, 3m, and 6m may be explored using the two instruments. In the measurement test, the devices are used to determine a reinforced concrete-made multi-purpose duct that accommodates water pipes, sewers, various electric wires, and heating pipes and is buried at a depth of 2-3m in the ground. In the measurement for a 3m-deep level, a spot high in conductivity due to the reinforced concrete is detected, and the result roughly corresponds to the lay of the duct. In the measurement for a 6m-deep level, no high-conductivity spot is found, meaning there is no such structure at this depth. Although there are some other high conductivity values recorded, they are attributed to manhole covers or steel tower bases on the ground surface. 3 refs., 8 figs.

  14. Optimization Models and Methods for Demand-Side Management of Residential Users: A Survey

    Directory of Open Access Journals (Sweden)

    Antimo Barbato

    2014-09-01

    Full Text Available The residential sector is currently one of the major contributors to the global energy balance. However, the energy demand of residential users has been so far largely uncontrollable and inelastic with respect to the power grid conditions. With the massive introduction of renewable energy sources and the large variations in energy flows, also the residential sector is required to provide some flexibility in energy use so as to contribute to the stability and efficiency of the electric system. To address this issue, demand management mechanisms can be used to optimally manage the energy resources of customers and their energy demand profiles. A very promising technique is represented by demand-side management (DSM, which consists in a proactive method aimed at making users energy-efficient in the long term. In this paper, we survey the most relevant studies on optimization methods for DSM of residential consumers. Specifically, we review the related literature according to three axes defining contrasting characteristics of the schemes proposed: DSM for individual users versus DSM for cooperative consumers, deterministic DSM versus stochastic DSM and day-ahead DSM versus real-time DSM. Based on this classification, we provide a big picture of the key features of different approaches and techniques and discuss future research directions.

  15. Content and Methods used to Train Tobacco Cessation Treatment Providers: An International Survey.

    Science.gov (United States)

    Kruse, Gina R; Rigotti, Nancy A; Raw, Martin; McNeill, Ann; Murray, Rachael; Piné-Abata, Hembadoon; Bitton, Asaf; McEwen, Andy

    2017-12-01

    There are limited existing data describing the training methods used to educate tobacco cessation treatment providers around the world. To measure the prevalence of tobacco cessation treatment content, skills training and teaching methods reported by tobacco treatment training programs across the world. Web-based survey in May-September 2013 among tobacco cessation training experts across six geographic regions and four World Bank income levels. Response rate was 73% (84 of 115 countries contacted). Of 104 individual programs from 84 countries, most reported teaching brief advice (78%) and one-to-one counseling (74%); telephone counseling was uncommon (33%). Overall, teaching of knowledge topics was more commonly reported than skills training. Programs in lower income countries less often reported teaching about medications, behavioral treatments and biomarkers and less often reported skills-based training about interviewing clients, medication management, biomarker measurement, assessing client outcomes, and assisting clients with co-morbidities. Programs reported a median 15 hours of training. Face-to-face training was common (85%); online programs were rare (19%). Almost half (47%) included no learner assessment. Only 35% offered continuing education. Nearly all programs reported teaching evidence-based treatment modalities in a face-to-face format. Few programs delivered training online or offered continuing education. Skills-based training was less common among low- and middle-income countries (LMICs). There is a large unmet need for tobacco treatment training protocols which emphasize practical skills, and which are more rapidly scalable than face-to-face training in LMICs.

  16. Pain relief by Cyberknife radiosurgery for spinal metastasis.

    Science.gov (United States)

    Lee, Sunyoung; Chun, Mison

    2012-01-01

    To report pain relief effect in patients with spinal metastases treated with Cyberknife® and to analyze the factors associated with pain relapse after initial pain relief. We retrospectively analyzed patients with spinal metastasis treated with stereotactic body radiosurgery between April 2007 and June 2009. A total of 57 patients with 73 lesions were available for analysis with a median follow-up of 6.8 months (range, 1-30). Pain was assessed by a verbal/visual analogue scale at each visit: from 0 to 10. Pain relief was defined as a decrease of at least three levels of the pain score without an increase in analgesic use. Complete relief was defined as no analgesics or a score 0 or 1. Pain relief was achieved in 88% of the lesions, with complete relief in 51% within 7 days from the start of radiosurgery. The median duration of pain relief was 3.2 months (range, 1-30). Pain reappeared in 16 patients (27%). Spinal cord compression (P = 0.001) and performance status (P = 0.01) were predictive of pain relapse by multivariate Cox analysis. All 6 patients treated with solitary spinal metastasis experienced pain relief; 5 of them were alive without evidence of disease at a median of 16 months (range, 7-30). As previous studies have shown, our study confirms that pain relief with spinal radiosurgery is around 90%. In particular, long-term pain relief and disease control was observed in patients with solitary spinal metastasis.

  17. Relief memory consolidation requires protein synthesis within the nucleus accumbens.

    Science.gov (United States)

    Bruning, Johann E A; Breitfeld, Tino; Kahl, Evelyn; Bergado-Acosta, Jorge R; Fendt, Markus

    2016-06-01

    Relief learning refers to the association of a stimulus with the relief from an aversive event. The thus-learned relief stimulus then can induce, e.g., an attenuation of the startle response or approach behavior, indicating positive valence. Previous studies revealed that the nucleus accumbens is essential for the acquisition and retrieval of relief memory. Here, we ask whether the nucleus accumbens is also the brain site for consolidation of relief memory into a long-term form. In rats, we blocked local protein synthesis within the nucleus accumbens by local infusions of anisomycin at different time points during a relief conditioning experiment. Accumbal anisomycin injections immediately after the relief conditioning session, but not 4 h later, prevented the consolidation into long-term relief memory. The retention of already consolidated relief memory was not affected by anisomycin injections. This identifies a time window and site for relief memory consolidation. These findings should complement our understanding of the full range of effects of adverse experiences, including cases of their distortion in humans such as post-traumatic stress disorder and/or phobias. Copyright © 2016 Elsevier Ltd. All rights reserved.

  18. The DEEP2 Galaxy Redshift Survey: The Voronoi-Delaunay Method Catalog of Galaxy Groups

    Energy Technology Data Exchange (ETDEWEB)

    Gerke, Brian F.; /UC, Berkeley; Newman, Jeffrey A.; /LBNL, NSD; Davis, Marc; /UC, Berkeley /UC, Berkeley, Astron.Dept.; Marinoni, Christian; /Brera Observ.; Yan, Renbin; Coil, Alison L.; Conroy, Charlie; Cooper, Michael C.; /UC, Berkeley, Astron.Dept.; Faber, S.M.; /Lick Observ.; Finkbeiner, Douglas P.; /Princeton U. Observ.; Guhathakurta, Puragra; /Lick Observ.; Kaiser, Nick; /Hawaii U.; Koo, David C.; Phillips, Andrew C.; /Lick Observ.; Weiner, Benjamin J.; /Maryland U.

    2012-02-14

    We use the first 25% of the DEEP2 Galaxy Redshift Survey spectroscopic data to identify groups and clusters of galaxies in redshift space. The data set contains 8370 galaxies with confirmed redshifts in the range 0.7 {<=} z {<=} 1.4, over one square degree on the sky. Groups are identified using an algorithm (the Voronoi-Delaunay Method) that has been shown to accurately reproduce the statistics of groups in simulated DEEP2-like samples. We optimize this algorithm for the DEEP2 survey by applying it to realistic mock galaxy catalogs and assessing the results using a stringent set of criteria for measuring group-finding success, which we develop and describe in detail here. We find in particular that the group-finder can successfully identify {approx}78% of real groups and that {approx}79% of the galaxies that are true members of groups can be identified as such. Conversely, we estimate that {approx}55% of the groups we find can be definitively identified with real groups and that {approx}46% of the galaxies we place into groups are interloper field galaxies. Most importantly, we find that it is possible to measure the distribution of groups in redshift and velocity dispersion, n({sigma}, z), to an accuracy limited by cosmic variance, for dispersions greater than 350 km s{sup -1}. We anticipate that such measurements will allow strong constraints to be placed on the equation of state of the dark energy in the future. Finally, we present the first DEEP2 group catalog, which assigns 32% of the galaxies to 899 distinct groups with two or more members, 153 of which have velocity dispersions above 350 km s{sup -1}. We provide locations, redshifts and properties for this high-dispersion subsample. This catalog represents the largest sample to date of spectroscopically detected groups at z {approx} 1.

  19. Application of the geological surveying methods employed at Gorleben to cavern projects in the central European zechstein basin

    International Nuclear Information System (INIS)

    Wilke, F.; Bornemann, O.; Behlau, J.; Mingerzahn, G.

    2002-01-01

    The investigations at Gorleben date back more than 20 years. New methods were developed and applied, especially for detailed stratigraphic and geochemical characterization of the zechstein formation and also geophysical survey methods and geological mapping of complex folds in saline structures. The greatest feat was the 3D imaging of all geological information accompanied by visualization of complex stratigraphic entities [de

  20. Methods for computing water-quality loads at sites in the U.S. Geological Survey National Water Quality Network

    Science.gov (United States)

    Lee, Casey J.; Murphy, Jennifer C.; Crawford, Charles G.; Deacon, Jeffrey R.

    2017-10-24

    The U.S. Geological Survey publishes information on concentrations and loads of water-quality constituents at 111 sites across the United States as part of the U.S. Geological Survey National Water Quality Network (NWQN). This report details historical and updated methods for computing water-quality loads at NWQN sites. The primary updates to historical load estimation methods include (1) an adaptation to methods for computing loads to the Gulf of Mexico; (2) the inclusion of loads computed using the Weighted Regressions on Time, Discharge, and Season (WRTDS) method; and (3) the inclusion of loads computed using continuous water-quality data. Loads computed using WRTDS and continuous water-quality data are provided along with those computed using historical methods. Various aspects of method updates are evaluated in this report to help users of water-quality loading data determine which estimation methods best suit their particular application.

  1. Experiences and unmet needs of women with physical disabilities for pain relief during labor and delivery.

    Science.gov (United States)

    Long-Bellil, Linda; Mitra, Monika; Iezzoni, Lisa I; Smeltzer, Suzanne C; Smith, Lauren D

    2017-07-01

    Childbirth is widely acknowledged as one of the most painful experiences most women will undergo in their lifetimes. Alleviating labor and delivery pain for women with physical disabilities can involve an additional level of complexity beyond that experienced by most women, but little research has explored their experiences. The purpose of this study was to explore the experiences of women with physical disabilities with respect to pain relief during labor and delivery with the goal of informing their care. Data were collected using semi-structured interviews with twenty-five women with physical disabilities from across the United States. Women expressed specific preferences for the method of pain relief. Some confronted systemic barriers in exploring their options for pain relief, while others were given a choice. At times, anesthesiologists lacked knowledge and experience in caring for women with disabilities. Conversely, some women described how the administration of anesthesia was meticulously planned and attributed their positive labor and delivery experiences to this careful planning. Advanced, individualized planning and evaluation of their options for pain relief was most satisfying to women and enabled them to make an informed choice. This approach is consistent with the recommendations of clinicians who have successfully provided pain relief during labor to women with complex physical disabilities. Clinicians who have successfully delivered babies of women with these and similar disabilities emphasize the importance of a team approach where the anesthesiologist and other specialists are involved early on in a woman's care. Copyright © 2017 Elsevier Inc. All rights reserved.

  2. Quantifying relief on alluvial fans using airborne lidar to reveal patterns of sediment accumulation

    Science.gov (United States)

    Morelan, A. E., III; Oskin, M. E.

    2017-12-01

    We present a method of quantifying detailed surface relief on alluvial fans from high-resolution topography. Average slope and curvature of the fan are used together to empirically derive an idealized, radially symmetric fan surface, from which we compute residual topography. Maps produced using this technique highlight spatial patterns of fan deposition and avulsion. Regions of high residual topography reveal active and abandoned sediment lobes accumulated from recent depositional events, often with well-defined channels at their apex. Preliminary observations suggest that surface relief is uniform across a collection of fans in a given region and source lithology. Alluvial fans with granitic catchment lithologies in eastern California (n=12), each with varying source catchment size and mean fan slope, all show relief of around 4 meters. A collection of fans from the Carrizo Plain in central California (n=12), with source catchments set within Miocene marine and nonmarine sedimentary rocks, show significantly lower relief values around 2 meters. We hypothesize that particle grain size determines this contrasting relief through its control on the thickness of fan-building debris flows. In both settings we find that sediment lobes tend to extend toward the fan toe. This pattern supports a process, observed in analog experiments, of fan deposition dominated by back-filling and overtopping of distributary channels by debris-flows.

  3. A novel robust chance constrained possibilistic programming model for disaster relief logistics under uncertainty

    Directory of Open Access Journals (Sweden)

    Maryam Rahafrooz

    2016-09-01

    Full Text Available In this paper, a novel multi-objective robust possibilistic programming model is proposed, which simultaneously considers maximizing the distributive justice in relief distribution, minimizing the risk of relief distribution, and minimizing the total logistics costs. To effectively cope with the uncertainties of the after-disaster environment, the uncertain parameters of the proposed model are considered in the form of fuzzy trapezoidal numbers. The proposed model not only considers relief commodities priority and demand points priority in relief distribution, but also considers the difference between the pre-disaster and post-disaster supply abilities of the suppliers. In order to solve the proposed model, the LP-metric and the improved augmented ε-constraint methods are used. Second, a set of test problems are designed to evaluate the effectiveness of the proposed robust model against its equivalent deterministic form, which reveales the capabilities of the robust model. Finally, to illustrate the performance of the proposed robust model, a seismic region of northwestern Iran (East Azerbaijan is selected as a case study to model its relief logistics in the face of future earthquakes. This investigation indicates the usefulness of the proposed model in the field of crisis.

  4. Iraq's Debt Relief: Procedure and Potential Implications for International Debt Relief

    National Research Council Canada - National Science Library

    Weiss, Martin A

    2009-01-01

    .... Reducing this debt to a sustainable level has been a priority of the U.S. government. Since 2003, debt relief negotiations have taken place in a variety of fora and led to the cancellation of a significant amount of Iraq's external debt...

  5. Shaded seafloor relief, backscatter strength, and surficial geology; German Bank, Scotian Shelf, offshore Nova Scotia

    Science.gov (United States)

    Todd, B.J.; Valentine, Page C.

    2010-01-01

    This map is part of a three-map series of German Bank, located on the Scotian Shelf off southern Nova Scotia.  This map is the product of a number of surveys (1997-2003) that used a multibeam sonar system to map 5321 km2 of the seafloor.  Other surveys collected geological data for scientific interpretation.  This map sheet shows the seafloor topography of German Bank in shaded-relief view and seafloor depth (coded by colour) at a scale of 1:1000,000.  Topographic contours generated from the multibeam data are shown (in white) on the colour-coded multibeam topography at a depth interval of 20 m.  Bathymetic contours (in blue) outside the multibeam survey area, presented at a depth interval of 10 m, are from the Natural Resource Map series (Canadian Hydrographic Service, 1967, 1971a, 1971b, 1972). Sheet 2 shows coloured backscatter strength in shaded-relief view.  Sheet 3 shows seafloor topography in shaded-relief view with colour-coded surficial geological units.

  6. Report on the survey of geothermal development at Okushiri Island, Hokkaido. Geochemical survey (Finger print method); Hokkaido Okushiritou chinetsu kaihatsu chosa chikagaku chosa (Finga print ho) hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1989-07-01

    The geochemical survey by the finger print method was carried out in the Okushiri Island area, Hokkaido, and places of fracture existence were extracted and districts of possible geothermal existence were estimated. The finger print method is a geochemical survey method of soil gas, and the soil gas was collected along the main roads and mountain streams at measuring intervals of 100-300m. The gas collector was buried 30cm deep from the ground surface for 17 days, and the soil gas that rose from deep underground was adsorbed/accumulated into activated carbon. The gas analysis was made by the high sensitivity Curie point pyrolysis/quadrupole mass spectrometer. As a result of the survey analysis, the existence of fracture zone was presumed in the district along the Shiromizusawa that is a branch of the Horonai River, district along the road of the Okushiri Island line and district 1.5km WSW from the 5.8K Pass. Further, out of all 12 specimens, 6 specimens of Type X were distributed in a group in the district 1km square in north, south, east and west with the top of Mt. Shokan almost as the center. The possible existence of geothermal reservoirs was presumed. (NEDO)

  7. Mean-field theory of photoinduced formation of surface reliefs in side-chain azobenzene polymers

    DEFF Research Database (Denmark)

    Pedersen, Thomas Garm; Johansen, Per Michael; Holme, N.C.R.

    1998-01-01

    A mean-field model of photoinduced surface reliefs in dye containing side-chain polymers is presented. It is demonstrated that photoinduced ordering of dye molecules subject to anisotropic intermolecular interactions leads to mass transport even when the intensity of the incident light is spatially...... uniform. Theoretical profiles are obtained using a simple variational method and excellent agreement with experimental surface reliefs recorded under various polarization configurations is found. The polarization dependence of both period and shape of the profiles is correctly reproduced by the model....

  8. Don't spin the pen: two alternative methods for second-stage sampling in urban cluster surveys

    Directory of Open Access Journals (Sweden)

    Rose Angela MC

    2007-06-01

    Full Text Available Abstract In two-stage cluster surveys, the traditional method used in second-stage sampling (in which the first household in a cluster is selected is time-consuming and may result in biased estimates of the indicator of interest. Firstly, a random direction from the center of the cluster is selected, usually by spinning a pen. The houses along that direction are then counted out to the boundary of the cluster, and one is then selected at random to be the first household surveyed. This process favors households towards the center of the cluster, but it could easily be improved. During a recent meningitis vaccination coverage survey in Maradi, Niger, we compared this method of first household selection to two alternatives in urban zones: 1 using a superimposed grid on the map of the cluster area and randomly selecting an intersection; and 2 drawing the perimeter of the cluster area using a Global Positioning System (GPS and randomly selecting one point within the perimeter. Although we only compared a limited number of clusters using each method, we found the sampling grid method to be the fastest and easiest for field survey teams, although it does require a map of the area. Selecting a random GPS point was also found to be a good method, once adequate training can be provided. Spinning the pen and counting households to the boundary was the most complicated and time-consuming. The two methods tested here represent simpler, quicker and potentially more robust alternatives to spinning the pen for cluster surveys in urban areas. However, in rural areas, these alternatives would favor initial household selection from lower density (or even potentially empty areas. Bearing in mind these limitations, as well as available resources and feasibility, investigators should choose the most appropriate method for their particular survey context.

  9. Surveying wolves without snow: a critical review of the methods used in Spain

    OpenAIRE

    Blanco, Juan Carlos; Cortés, Yolanda

    2011-01-01

    Wolves (Canis lupus) are difficult to survey, and in most countries, snow is used for identifying the species, counting individuals, recording movements and determining social position. However, in the Iberian peninsula and other southern regions of its gobal range, snow is very scarce in winter, so wolves must be surveyed without snow. In Spain and Portugal, wolves are surveyed through estimating number of wolf packs in summer by means of locating litters of pups when they are at rendezvous ...

  10. Increasing the Useful Life of Quench Reliefs with Inconel Bellows

    Energy Technology Data Exchange (ETDEWEB)

    Soyars, W. M. [Fermilab

    1999-01-01

    Reliable quench relief valves are an important part of superconducting magnet systems. Fermilab developed bellows-actuated cryogenic quench reliefs which have been in use since the early l 980's. The original design uses a stainless steel bellows. A high frequency, low amplitude vibration during relieving events has resulted in fatigue failures in the original design. To take advantage of the improved resistance to fatigue of Inconel, a nickel-chromium alloy, reliefs using Inconel 625 bellows were made. Design, development, and testing of the new version reliefs will be discussed. Tests show that relief valve lifetimes using Inconel bellows are more than five times greater than when using the original stainless steel bellows. Inconel bellows show great promise in increasing the lifetime of quench relief valves, and thus the reliability of accelerator cryogenic systems.

  11. Survey research with a random digit dial national mobile phone sample in Ghana: Methods and sample quality

    Science.gov (United States)

    Sefa, Eunice; Adimazoya, Edward Akolgo; Yartey, Emmanuel; Lenzi, Rachel; Tarpo, Cindy; Heward-Mills, Nii Lante; Lew, Katherine; Ampeh, Yvonne

    2018-01-01

    Introduction Generating a nationally representative sample in low and middle income countries typically requires resource-intensive household level sampling with door-to-door data collection. High mobile phone penetration rates in developing countries provide new opportunities for alternative sampling and data collection methods, but there is limited information about response rates and sample biases in coverage and nonresponse using these methods. We utilized data from an interactive voice response, random-digit dial, national mobile phone survey in Ghana to calculate standardized response rates and assess representativeness of the obtained sample. Materials and methods The survey methodology was piloted in two rounds of data collection. The final survey included 18 demographic, media exposure, and health behavior questions. Call outcomes and response rates were calculated according to the American Association of Public Opinion Research guidelines. Sample characteristics, productivity, and costs per interview were calculated. Representativeness was assessed by comparing data to the Ghana Demographic and Health Survey and the National Population and Housing Census. Results The survey was fielded during a 27-day period in February-March 2017. There were 9,469 completed interviews and 3,547 partial interviews. Response, cooperation, refusal, and contact rates were 31%, 81%, 7%, and 39% respectively. Twenty-three calls were dialed to produce an eligible contact: nonresponse was substantial due to the automated calling system and dialing of many unassigned or non-working numbers. Younger, urban, better educated, and male respondents were overrepresented in the sample. Conclusions The innovative mobile phone data collection methodology yielded a large sample in a relatively short period. Response rates were comparable to other surveys, although substantial coverage bias resulted from fewer women, rural, and older residents completing the mobile phone survey in

  12. A new survey method of tsunami inundation area using chemical analysis of soil. Application to the field survey on the 2010 Chilean tsunami at Chile

    International Nuclear Information System (INIS)

    Yoshii, Takumi; Matsuyama, Masafumi; Koshimura, Shunichi; Mas, Erick; Matsuoka, Masashi; Jimenez, Cesar

    2011-01-01

    The severe earthquake of Mw 8.8 occurred on 27 Feb. 2010 at the center of Chile. The tsunami generated by the earthquake attacked the coast of Chile and it propagated to the Pacific Ocean coastline. The field survey on the disaster damages due to the tsunami was conducted near Talcahuano in Chile to prepare for the great tsunamis accompanied by the earthquakes predicted to occur near Japan within several decades. The aims of this field survey were to survey disaster damages especially relevant to electric equipments and to develop the survey method based on a chemical analysis of the inundated soil which supplies objective data with high accuracy compared to the conventional methods. In the survey area, the average of inundation heights was 6 m, however it locally reached up to 25 m. The maximum sea-level height of the series of the tsunamis was recorded in the third or fourth wave (roughly 3 hours after the earthquake occurrence). The first floors of houses were severely destroyed and some ships were carried and left on land by the tsunamis. Furthermore, the large amount of sediment was deposited in towns. Removing the drifted ships and tsunami deposit is important consideration for quick recovery from a disaster due to a tsunami. The soil samples were obtained from both the inundated and the not-inundated position. The stirred solution was made by the soil and ultrapure water, then, the content of water-soluble ions, electric conductivity (EC), and pH were measured. The soil obtained in the tsunami inundated area contains much water-soluble ions (Na + , Mg 2+ , Cl - , Br - , SO 4 2- ) compared to the samples obtained in the not-inundated area. The discriminant analysis of the tsunami inundation was conducted using the amount of ions in the soil. High discriminant accuracy (over 90%) was obtained with Na + , Mg 2+ , Cl - , Br - , SO 4 2- and EC. Br - , Cl - , Na + are believed to be suitable for the discriminant analysis about tsunamis considering the contaminant

  13. A novel and effective acupuncture modality as a complementary therapy to acute pain relief in inpatients with rib fractures

    OpenAIRE

    Hsin-Yi Ho; Chao-Wei Chen; Ming-Chieh Li; Yu-Pao Hsu; Shih-Ching Kang; Erh-Hao Liu; Ko-Hung Lee

    2014-01-01

    Background: Pain control has been emphasized as a priority for both practitioners and inpatients with rib fractures, since analgesia could only offer limited relief from severe pain. A prospective and randomized controlled trial was conducted to analyze the efficacy and efficiency of acupuncture in acute pain relief for inpatients with rib fractures. Methods: A total of 58 inpatients were recruited and allocated to two groups, receiving identical doses of conventional oral analgesics as we...

  14. Reporting on methods of subgroup analysis in clinical trials: a survey of four scientific journals

    Directory of Open Access Journals (Sweden)

    E.D. Moreira Jr.

    2001-11-01

    Full Text Available Results of subgroup analysis (SA reported in randomized clinical trials (RCT cannot be adequately interpreted without information about the methods used in the study design and the data analysis. Our aim was to show how often inaccurate or incomplete reports occur. First, we selected eight methodological aspects of SA on the basis of their importance to a reader in determining the confidence that should be placed in the author's conclusions regarding such analysis. Then, we reviewed the current practice of reporting these methodological aspects of SA in clinical trials in four leading journals, i.e., the New England Journal of Medicine, the Journal of the American Medical Association, the Lancet, and the American Journal of Public Health. Eight consecutive reports from each journal published after July 1, 1998 were included. Of the 32 trials surveyed, 17 (53% had at least one SA. Overall, the proportion of RCT reporting a particular methodological aspect ranged from 23 to 94%. Information on whether the SA preceded/followed the analysis was reported in only 7 (41% of the studies. Of the total possible number of items to be reported, NEJM, JAMA, Lancet and AJPH clearly mentioned 59, 67, 58 and 72%, respectively. We conclude that current reporting of SA in RCT is incomplete and inaccurate. The results of such SA may have harmful effects on treatment recommendations if accepted without judicious scrutiny. We recommend that editors improve the reporting of SA in RCT by giving authors a list of the important items to be reported.

  15. Methods used by accredited dental specialty programs to advertise faculty positions: results of a national survey.

    Science.gov (United States)

    Ballard, Richard W; Hagan, Joseph L; Armbruster, Paul C; Gallo, John R

    2011-01-01

    The various reasons for the current and projected shortages of dental faculty members in the United States have received much attention. Dental school deans have reported that the top three factors impacting their ability to fill faculty positions are meeting the requirements of the position, lack of response to position announcement, and salary/budget limitations. An electronic survey sent to program directors of specialty programs at all accredited U.S. dental schools inquired about the number of vacant positions, advertised vacant positions, reasons for not advertising, selection of advertising medium, results of advertising, and assistance from professional dental organizations. A total of seventy-three permanently funded full-time faculty positions were reported vacant, with 89.0 percent of these positions having been advertised in nationally recognized professional journals and newsletters. Networking or word-of-mouth was reported as the most successful method for advertising. The majority of those responding reported that professional dental organizations did not help with filling vacant faculty positions, but that they would utilize the American Dental Association's website or their specialty organization's website to post faculty positions if they were easy to use and update.

  16. An empirical survey to investigate quality of men's clothing market using QFD method

    Directory of Open Access Journals (Sweden)

    Samira Golshan

    2012-08-01

    Full Text Available One of the most important techniques on improving customer satisfaction in clothing and textile industry is to increase the quality of goods and services. There are literally different methods for detecting important items influencing clothing products and the proposed model of this paper uses quality function deployment (QFD. The proposed model of this paper designs and distributes a questionnaire among some experts to detect necessary factors and using house of quality we determine the most important factors impacting the customer's clothing selection. The proposed study of this paper focuses men who are 15 to 45 years old living in Yazd/Iran. The brand we do the investigation sells the products in three shopping centers located in this city. We have distributed 100 questionnaires and collected 65 properly filled ones. Based on the results of our survey, suitable design, printing and packaging specifications, necessary requirements, optimization of production planning and appropriate sewing machine setting are considered as the most important characteristics influencing the purchase of a clothing products.

  17. A method for mapping corn using the US Geological Survey 1992 National Land Cover Dataset

    Science.gov (United States)

    Maxwell, S.K.; Nuckols, J.R.; Ward, M.H.

    2006-01-01

    Long-term exposure to elevated nitrate levels in community drinking water supplies has been associated with an elevated risk of several cancers including non-Hodgkin's lymphoma, colon cancer, and bladder cancer. To estimate human exposure to nitrate, specific crop type information is needed as fertilizer application rates vary widely by crop type. Corn requires the highest application of nitrogen fertilizer of crops grown in the Midwest US. We developed a method to refine the US Geological Survey National Land Cover Dataset (NLCD) (including map and original Landsat images) to distinguish corn from other crops. Overall average agreement between the resulting corn and other row crops class and ground reference data was 0.79 kappa coefficient with individual Landsat images ranging from 0.46 to 0.93 kappa. The highest accuracies occurred in Regions where corn was the single dominant crop (greater than 80.0%) and the crop vegetation conditions at the time of image acquisition were optimum for separation of corn from all other crops. Factors that resulted in lower accuracies included the accuracy of the NLCD map, accuracy of corn areal estimates, crop mixture, crop condition at the time of Landsat overpass, and Landsat scene anomalies.

  18. Estimating factors influencing the detection probability of semiaquatic freshwater snails using quadrat survey methods

    Science.gov (United States)

    Roesler, Elizabeth L.; Grabowski, Timothy B.

    2018-01-01

    Developing effective monitoring methods for elusive, rare, or patchily distributed species requires extra considerations, such as imperfect detection. Although detection is frequently modeled, the opportunity to assess it empirically is rare, particularly for imperiled species. We used Pecos assiminea (Assiminea pecos), an endangered semiaquatic snail, as a case study to test detection and accuracy issues surrounding quadrat searches. Quadrats (9 × 20 cm; n = 12) were placed in suitable Pecos assiminea habitat and randomly assigned a treatment, defined as the number of empty snail shells (0, 3, 6, or 9). Ten observers rotated through each quadrat, conducting 5-min visual searches for shells. The probability of detecting a shell when present was 67.4 ± 3.0%, but it decreased with the increasing litter depth and fewer number of shells present. The mean (± SE) observer accuracy was 25.5 ± 4.3%. Accuracy was positively correlated to the number of shells in the quadrat and negatively correlated to the number of times a quadrat was searched. The results indicate quadrat surveys likely underrepresent true abundance, but accurately determine the presence or absence. Understanding detection and accuracy of elusive, rare, or imperiled species improves density estimates and aids in monitoring and conservation efforts.

  19. Sample Size Calculations for Population Size Estimation Studies Using Multiplier Methods With Respondent-Driven Sampling Surveys.

    Science.gov (United States)

    Fearon, Elizabeth; Chabata, Sungai T; Thompson, Jennifer A; Cowan, Frances M; Hargreaves, James R

    2017-09-14

    While guidance exists for obtaining population size estimates using multiplier methods with respondent-driven sampling surveys, we lack specific guidance for making sample size decisions. To guide the design of multiplier method population size estimation studies using respondent-driven sampling surveys to reduce the random error around the estimate obtained. The population size estimate is obtained by dividing the number of individuals receiving a service or the number of unique objects distributed (M) by the proportion of individuals in a representative survey who report receipt of the service or object (P). We have developed an approach to sample size calculation, interpreting methods to estimate the variance around estimates obtained using multiplier methods in conjunction with research into design effects and respondent-driven sampling. We describe an application to estimate the number of female sex workers in Harare, Zimbabwe. There is high variance in estimates. Random error around the size estimate reflects uncertainty from M and P, particularly when the estimate of P in the respondent-driven sampling survey is low. As expected, sample size requirements are higher when the design effect of the survey is assumed to be greater. We suggest a method for investigating the effects of sample size on the precision of a population size estimate obtained using multipler methods and respondent-driven sampling. Uncertainty in the size estimate is high, particularly when P is small, so balancing against other potential sources of bias, we advise researchers to consider longer service attendance reference periods and to distribute more unique objects, which is likely to result in a higher estimate of P in the respondent-driven sampling survey. ©Elizabeth Fearon, Sungai T Chabata, Jennifer A Thompson, Frances M Cowan, James R Hargreaves. Originally published in JMIR Public Health and Surveillance (http://publichealth.jmir.org), 14.09.2017.

  20. 30 CFR 204.203 - What is the other relief option?

    Science.gov (United States)

    2010-07-01

    ... MANAGEMENT ALTERNATIVES FOR MARGINAL PROPERTIES Accounting and Auditing Relief § 204.203 What is the other... that is appropriate for production from your marginal property, provided it is not prohibited under... are: (1) To report and pay royalties using a valuation method other than that required under 30 CFR...

  1. 75 FR 66702 - Western Electric Coordinating Council; Qualified Transfer Path Unscheduled Flow Relief Regional...

    Science.gov (United States)

    2010-10-29

    ..., stating that ``IRO-006-WECC-1 provides entities with the necessary motivation to curtail off-path... notification of Unscheduled Flow Events, calculate and display required relief, and provide a rapid method of... of Management and Budget (OMB) regulations require approval of certain information collection...

  2. The Global Survey Method Applied to Ground-level Cosmic Ray Measurements

    Science.gov (United States)

    Belov, A.; Eroshenko, E.; Yanke, V.; Oleneva, V.; Abunin, A.; Abunina, M.; Papaioannou, A.; Mavromichalaki, H.

    2018-04-01

    The global survey method (GSM) technique unites simultaneous ground-level observations of cosmic rays in different locations and allows us to obtain the main characteristics of cosmic-ray variations outside of the atmosphere and magnetosphere of Earth. This technique has been developed and applied in numerous studies over many years by the Institute of Terrestrial Magnetism, Ionosphere and Radiowave Propagation (IZMIRAN). We here describe the IZMIRAN version of the GSM in detail. With this technique, the hourly data of the world-wide neutron-monitor network from July 1957 until December 2016 were processed, and further processing is enabled upon the receipt of new data. The result is a database of homogeneous and continuous hourly characteristics of the density variations (an isotropic part of the intensity) and the 3D vector of the cosmic-ray anisotropy. It includes all of the effects that could be identified in galactic cosmic-ray variations that were caused by large-scale disturbances of the interplanetary medium in more than 50 years. These results in turn became the basis for a database on Forbush effects and interplanetary disturbances. This database allows correlating various space-environment parameters (the characteristics of the Sun, the solar wind, et cetera) with cosmic-ray parameters and studying their interrelations. We also present features of the coupling coefficients for different neutron monitors that enable us to make a connection from ground-level measurements to primary cosmic-ray variations outside the atmosphere and the magnetosphere. We discuss the strengths and weaknesses of the current version of the GSM as well as further possible developments and improvements. The method developed allows us to minimize the problems of the neutron-monitor network, which are typical for experimental physics, and to considerably enhance its advantages.

  3. Doubling Your Payoff: Winning Pain Relief Engages Endogenous Pain Inhibition

    Science.gov (United States)

    Becker, Susanne; Gandhi, Wiebke; Kwan, Saskia; Ahmed, Alysha-Karima; Schweinhardt, Petra

    2015-01-01

    When in pain, pain relief is much sought after, particularly for individuals with chronic pain. In analogy to augmentation of the hedonic experience ("liking") of a reward by the motivation to obtain a reward ("wanting"), the seeking of pain relief in a motivated state might increase the experience of pain relief when obtained. We tested this hypothesis in a psychophysical experiment in healthy human subjects, by assessing potential pain-inhibitory effects of pain relief "won" in a wheel of fortune game compared with pain relief without winning, exploiting the fact that the mere chance of winning induces a motivated state. The results show pain-inhibitory effects of pain relief obtained by winning in behaviorally assessed pain perception and ratings of pain intensity. Further, the higher participants scored on the personality trait novelty seeking, the more pain inhibition was induced. These results provide evidence that pain relief, when obtained in a motivated state, engages endogenous pain-inhibitory systems beyond the pain reduction that underlies the relief in the first place. Consequently, such pain relief might be used to improve behavioral pain therapy, inducing a positive, perhaps self-amplifying feedback loop of reduced pain and improved functionality.

  4. Sharing Information among Various Organizations in Relief Efforts

    National Research Council Canada - National Science Library

    Costur, Gurkan

    2005-01-01

    .... An analysis is presented of the December 2004 Indian Ocean tsunami relief effort; specifically, how different organizations such as the military, United Nations, and non-governmental organizations...

  5. Sandy PMO Disaster Relief Appropriations Act of 2013 Financial Data

    Data.gov (United States)

    Department of Homeland Security — Sandy PMO: Disaster Relief Appropriations Act of 2013 (Sandy Supplemental Bill) Financial Data. This is the Sandy Supplemental Quarterly Financial Datasets that are...

  6. Shaded relief of Bahia State, Brazil

    Science.gov (United States)

    2000-01-01

    This topographic image is the first to show the full 240-kilometer-wide (150 mile)swath collected by the Shuttle Radar Topography Mission (SRTM). The area shown is in the state of Bahia in Brazil. The semi-circular mountains along the left side of the image are the Serra Da Jacobin, which rise to 1100 meters (3600 feet) above sea level. The total relief shown is approximately 800 meters (2600 feet). The top part of the image is the Sertao, a semi-arid region, that is subject to severe droughts during El Nino events. A small portion of the San Francisco River, the longest river (1609 kilometers or 1000 miles) entirely within Brazil, cuts across the upper right corner of the image. This river is a major source of water for irrigation and hydroelectric power. Mapping such regions will allow scientists to better understand the relationships between flooding cycles, drought and human influences on ecosystems.This shaded relief image was generated using topographic data from the Shuttle Radar Topography Mission. A computer-generated artificial light source illuminates the elevation data to produce a pattern of light and shadows. Slopes facing the light appear bright, while those facing away are shaded. On flatter surfaces, the pattern of light and shadows can reveal subtle features in the terrain. Colors show the elevation as measured by SRTM. Colors range from green at the lowest elevations to reddish at the highest elevations. Shaded relief maps are commonly used in applications such as geologic mapping and land use planning.The Shuttle Radar Topography Mission (SRTM), launched on February 11, 2000, uses the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar (SIR-C/X-SAR) that flew twice on the Space Shuttle Endeavour in 1994. The mission is designed to collect three-dimensional measurements of the Earth's surface. To collect the 3-D data, engineers added a 60-meter-long (200-foot) mast, an additional C-band imaging

  7. A method of encountering the ratio of adjacent sides and its applied study in nuclear engineering survey

    International Nuclear Information System (INIS)

    Wu Jingqin

    1996-01-01

    The cross side or range net survey method is to compute the average error of the measured lengths of sides. With the increment of the side length, the viewing variance increases greatly. Generally the photo-electrical distance survey equipment has a high inside precision, but it is affected by typical weather error so that the outside precision is decreased, and this weather error similar to systematic error greatly decreases the viewing side precision. To solve this problem, theoretical study and field test were carried out for the correlation of ratios among short sides by photo-electrical survey, and the stability degree of the ratios of sides, a new method of ratio encountering of adjacent sides is put forward. Because of the weights of the ration variance σ γ 2 = 2η 2 γ 2 and the angular variance σ β 2 = 2J 2 ρ 2 match each other, so the systematic error can be eliminated completely, and a survey point co-ordinate of high precision can be obtained. It is easy to operate, as it does not require multi-photo-band survey or to operate at the optimal observation time, and is especially suitable to nuclear engineering survey applications. (3 tabs.)

  8. ASSESSMENT OF THE INFLUENCE OF MODERN CRUSTAL MOVEMENTS AND THE RECENTLY ACTIVATED PRECAMBRIAN STRUCTURAL PLAN ON THE RELIEF OF THE LAKE LADOGA REGION (THE SOUTHEASTERN BALTIC SHIELD

    Directory of Open Access Journals (Sweden)

    A. O. Agibalov

    2017-01-01

    Full Text Available This paper describes the influence of modern crustal movements and the recently activated Precambrian structural plan on the relief of theLakeLadogaregion. It presents the results of comprehensive studies, including processing of the regional geological and geomorphological data by the modern methods, as the major novelty of our work. The solutions of earthquake focal mechanisms suggest the current subhorizontal NW compression in the study area. Based on the computer simulation by the Roxar software, we have identified areas wherein new fractures are most likely to occur, determined the dominant directions of such fractures, and revealed the areas of intense vertical movements in the given stress state. The input database included a digital model of the relief and the spatial patterns of ancient faults represented by large-size inhomogeneities influencing the stress field. Strain values were estimated from the horizontal displacements recorded by the International GPS Service for Geodynamics (IGS and the GPS networks in theRepublicofKareliaand the southeastern regions ofFinland. Using the LESSA software, we have estima­ted the relief orientation characteristics: the density of lineaments, and elongation lines, which are indicative of the changes in the dominant directions of the strike of the lineaments (‘hatches’ in the study area. By interpreting the satellite images and the topographic maps (scale 1:20000, we reveal a number of geological structures, such as gra­nite-gneiss domes and large-size faults, which are directly reflected in the relief. The study results give grounds to establish an indirect relationship between the relief and the modern field of deformation: the areas with high strain values correspond to the areas with steep slopes. The computer simulation data show a NE-trending linear zone with the increased amplitudes of vertical movements. This zone occupies the region along the NW shoreLakeLadoga. In the block

  9. Methods for estimating private forest ownership statistics: revised methods for the USDA Forest Service's National Woodland Owner Survey

    Science.gov (United States)

    Brenton J. ​Dickinson; Brett J. Butler

    2013-01-01

    The USDA Forest Service's National Woodland Owner Survey (NWOS) is conducted to better understand the attitudes and behaviors of private forest ownerships, which control more than half of US forestland. Inferences about the populations of interest should be based on theoretically sound estimation procedures. A recent review of the procedures disclosed an error in...

  10. Traditional methods v. new technologies – dilemmas for dietary assessment in large-scale nutrition surveys and studies

    DEFF Research Database (Denmark)

    Amoutzopoulos, B.; Steer, T.; Roberts, C.

    2018-01-01

    assessment in population surveys’, was held at the 9th International Conference on Diet and Activity Methods (ICDAM9), Brisbane, September 2015. Despite respondent and researcher burden, traditional methods have been most commonly used in nutrition surveys. However, dietary assessment technologies offer...... of traditional dietary assessment methods (food records, FFQ, 24 h recalls, diet history with interviewer-assisted data collection) v. new technology-based dietary assessment methods (web-based and mobile device applications). The panel discussion ‘Traditional methods v. new technologies: dilemmas for dietary......The aim of the present paper is to summarise current and future applications of dietary assessment technologies in nutrition surveys in developed countries. It includes the discussion of key points and highlights of subsequent developments from a panel discussion to address strengths and weaknesses...

  11. Survey research with a random digit dial national mobile phone sample in Ghana: Methods and sample quality.

    Science.gov (United States)

    L'Engle, Kelly; Sefa, Eunice; Adimazoya, Edward Akolgo; Yartey, Emmanuel; Lenzi, Rachel; Tarpo, Cindy; Heward-Mills, Nii Lante; Lew, Katherine; Ampeh, Yvonne

    2018-01-01

    Generating a nationally representative sample in low and middle income countries typically requires resource-intensive household level sampling with door-to-door data collection. High mobile phone penetration rates in developing countries provide new opportunities for alternative sampling and data collection methods, but there is limited information about response rates and sample biases in coverage and nonresponse using these methods. We utilized data from an interactive voice response, random-digit dial, national mobile phone survey in Ghana to calculate standardized response rates and assess representativeness of the obtained sample. The survey methodology was piloted in two rounds of data collection. The final survey included 18 demographic, media exposure, and health behavior questions. Call outcomes and response rates were calculated according to the American Association of Public Opinion Research guidelines. Sample characteristics, productivity, and costs per interview were calculated. Representativeness was assessed by comparing data to the Ghana Demographic and Health Survey and the National Population and Housing Census. The survey was fielded during a 27-day period in February-March 2017. There were 9,469 completed interviews and 3,547 partial interviews. Response, cooperation, refusal, and contact rates were 31%, 81%, 7%, and 39% respectively. Twenty-three calls were dialed to produce an eligible contact: nonresponse was substantial due to the automated calling system and dialing of many unassigned or non-working numbers. Younger, urban, better educated, and male respondents were overrepresented in the sample. The innovative mobile phone data collection methodology yielded a large sample in a relatively short period. Response rates were comparable to other surveys, although substantial coverage bias resulted from fewer women, rural, and older residents completing the mobile phone survey in comparison to household surveys. Random digit dialing of mobile

  12. Survey research with a random digit dial national mobile phone sample in Ghana: Methods and sample quality.

    Directory of Open Access Journals (Sweden)

    Kelly L'Engle

    Full Text Available Generating a nationally representative sample in low and middle income countries typically requires resource-intensive household level sampling with door-to-door data collection. High mobile phone penetration rates in developing countries provide new opportunities for alternative sampling and data collection methods, but there is limited information about response rates and sample biases in coverage and nonresponse using these methods. We utilized data from an interactive voice response, random-digit dial, national mobile phone survey in Ghana to calculate standardized response rates and assess representativeness of the obtained sample.The survey methodology was piloted in two rounds of data collection. The final survey included 18 demographic, media exposure, and health behavior questions. Call outcomes and response rates were calculated according to the American Association of Public Opinion Research guidelines. Sample characteristics, productivity, and costs per interview were calculated. Representativeness was assessed by comparing data to the Ghana Demographic and Health Survey and the National Population and Housing Census.The survey was fielded during a 27-day period in February-March 2017. There were 9,469 completed interviews and 3,547 partial interviews. Response, cooperation, refusal, and contact rates were 31%, 81%, 7%, and 39% respectively. Twenty-three calls were dialed to produce an eligible contact: nonresponse was substantial due to the automated calling system and dialing of many unassigned or non-working numbers. Younger, urban, better educated, and male respondents were overrepresented in the sample.The innovative mobile phone data collection methodology yielded a large sample in a relatively short period. Response rates were comparable to other surveys, although substantial coverage bias resulted from fewer women, rural, and older residents completing the mobile phone survey in comparison to household surveys. Random digit

  13. [Comparison study on sampling methods of Oncomelania hupensis snail survey in marshland schistosomiasis epidemic areas in China].

    Science.gov (United States)

    An, Zhao; Wen-Xin, Zhang; Zhong, Yao; Yu-Kuan, Ma; Qing, Liu; Hou-Lang, Duan; Yi-di, Shang

    2016-06-29

    To optimize and simplify the survey method of Oncomelania hupensis snail in marshland endemic region of schistosomiasis and increase the precision, efficiency and economy of the snail survey. A quadrate experimental field was selected as the subject of 50 m×50 m size in Chayegang marshland near Henghu farm in the Poyang Lake region and a whole-covered method was adopted to survey the snails. The simple random sampling, systematic sampling and stratified random sampling methods were applied to calculate the minimum sample size, relative sampling error and absolute sampling error. The minimum sample sizes of the simple random sampling, systematic sampling and stratified random sampling methods were 300, 300 and 225, respectively. The relative sampling errors of three methods were all less than 15%. The absolute sampling errors were 0.221 7, 0.302 4 and 0.047 8, respectively. The spatial stratified sampling with altitude as the stratum variable is an efficient approach of lower cost and higher precision for the snail survey.

  14. THE DEEP2 GALAXY REDSHIFT SURVEY: THE VORONOI-DELAUNAY METHOD CATALOG OF GALAXY GROUPS

    Energy Technology Data Exchange (ETDEWEB)

    Gerke, Brian F. [KIPAC, SLAC National Accelerator Laboratory, 2575 Sand Hill Road, MS 29, Menlo Park, CA 94725 (United States); Newman, Jeffrey A. [Department of Physics and Astronomy, 3941 O' Hara Street, Pittsburgh, PA 15260 (United States); Davis, Marc [Department of Physics and Department of Astronomy, Campbell Hall, University of California-Berkeley, Berkeley, CA 94720 (United States); Coil, Alison L. [Center for Astrophysics and Space Sciences, University of California, San Diego, 9500 Gilman Drive, MC 0424, La Jolla, CA 92093 (United States); Cooper, Michael C. [Center for Galaxy Evolution, Department of Physics and Astronomy, University of California-Irvine, Irvine, CA 92697 (United States); Dutton, Aaron A. [Department of Physics and Astronomy, University of Victoria, Victoria, BC V8P 5C2 (Canada); Faber, S. M.; Guhathakurta, Puragra; Koo, David C.; Phillips, Andrew C. [UCO/Lick Observatory, University of California-Santa Cruz, Santa Cruz, CA 95064 (United States); Konidaris, Nicholas; Lin, Lihwai [Astronomy Department, Caltech 249-17, Pasadena, CA 91125 (United States); Noeske, Kai [Space Telescope Science Institute, 3700 San Martin Drive, Baltimore, MD 21218 (United States); Rosario, David J. [Max Planck Institute for Extraterrestrial Physics, Giessenbachstr. 1, 85748 Garching bei Muenchen (Germany); Weiner, Benjamin J.; Willmer, Christopher N. A. [Steward Observatory, University of Arizona, 933 North Cherry Avenue, Tucson, AZ 85721 (United States); Yan, Renbin [Department of Astronomy and Astrophysics, University of Toronto, 50 St. George Street, Toronto, ON M5S 3H4 (Canada)

    2012-05-20

    We present a public catalog of galaxy groups constructed from the spectroscopic sample of galaxies in the fourth data release from the Deep Extragalactic Evolutionary Probe 2 (DEEP2) Galaxy Redshift Survey, including the Extended Groth Strip (EGS). The catalog contains 1165 groups with two or more members in the EGS over the redshift range 0 < z < 1.5 and 1295 groups at z > 0.6 in the rest of DEEP2. Twenty-five percent of EGS galaxies and fourteen percent of high-z DEEP2 galaxies are assigned to galaxy groups. The groups were detected using the Voronoi-Delaunay method (VDM) after it has been optimized on mock DEEP2 catalogs following similar methods to those employed in Gerke et al. In the optimization effort, we have taken particular care to ensure that the mock catalogs resemble the data as closely as possible, and we have fine-tuned our methods separately on mocks constructed for the EGS and the rest of DEEP2. We have also probed the effect of the assumed cosmology on our inferred group-finding efficiency by performing our optimization on three different mock catalogs with different background cosmologies, finding large differences in the group-finding success we can achieve for these different mocks. Using the mock catalog whose background cosmology is most consistent with current data, we estimate that the DEEP2 group catalog is 72% complete and 61% pure (74% and 67% for the EGS) and that the group finder correctly classifies 70% of galaxies that truly belong to groups, with an additional 46% of interloper galaxies contaminating the catalog (66% and 43% for the EGS). We also confirm that the VDM catalog reconstructs the abundance of galaxy groups with velocity dispersions above {approx}300 km s{sup -1} to an accuracy better than the sample variance, and this successful reconstruction is not strongly dependent on cosmology. This makes the DEEP2 group catalog a promising probe of the growth of cosmic structure that can potentially be used for cosmological tests.

  15. THE DEEP2 GALAXY REDSHIFT SURVEY: THE VORONOI-DELAUNAY METHOD CATALOG OF GALAXY GROUPS

    International Nuclear Information System (INIS)

    Gerke, Brian F.; Newman, Jeffrey A.; Davis, Marc; Coil, Alison L.; Cooper, Michael C.; Dutton, Aaron A.; Faber, S. M.; Guhathakurta, Puragra; Koo, David C.; Phillips, Andrew C.; Konidaris, Nicholas; Lin, Lihwai; Noeske, Kai; Rosario, David J.; Weiner, Benjamin J.; Willmer, Christopher N. A.; Yan, Renbin

    2012-01-01

    We present a public catalog of galaxy groups constructed from the spectroscopic sample of galaxies in the fourth data release from the Deep Extragalactic Evolutionary Probe 2 (DEEP2) Galaxy Redshift Survey, including the Extended Groth Strip (EGS). The catalog contains 1165 groups with two or more members in the EGS over the redshift range 0 0.6 in the rest of DEEP2. Twenty-five percent of EGS galaxies and fourteen percent of high-z DEEP2 galaxies are assigned to galaxy groups. The groups were detected using the Voronoi-Delaunay method (VDM) after it has been optimized on mock DEEP2 catalogs following similar methods to those employed in Gerke et al. In the optimization effort, we have taken particular care to ensure that the mock catalogs resemble the data as closely as possible, and we have fine-tuned our methods separately on mocks constructed for the EGS and the rest of DEEP2. We have also probed the effect of the assumed cosmology on our inferred group-finding efficiency by performing our optimization on three different mock catalogs with different background cosmologies, finding large differences in the group-finding success we can achieve for these different mocks. Using the mock catalog whose background cosmology is most consistent with current data, we estimate that the DEEP2 group catalog is 72% complete and 61% pure (74% and 67% for the EGS) and that the group finder correctly classifies 70% of galaxies that truly belong to groups, with an additional 46% of interloper galaxies contaminating the catalog (66% and 43% for the EGS). We also confirm that the VDM catalog reconstructs the abundance of galaxy groups with velocity dispersions above ∼300 km s –1 to an accuracy better than the sample variance, and this successful reconstruction is not strongly dependent on cosmology. This makes the DEEP2 group catalog a promising probe of the growth of cosmic structure that can potentially be used for cosmological tests.

  16. Spatially Uniform ReliefF (SURF for computationally-efficient filtering of gene-gene interactions

    Directory of Open Access Journals (Sweden)

    Greene Casey S

    2009-09-01

    Full Text Available Abstract Background Genome-wide association studies are becoming the de facto standard in the genetic analysis of common human diseases. Given the complexity and robustness of biological networks such diseases are unlikely to be the result of single points of failure but instead likely arise from the joint failure of two or more interacting components. The hope in genome-wide screens is that these points of failure can be linked to single nucleotide polymorphisms (SNPs which confer disease susceptibility. Detecting interacting variants that lead to disease in the absence of single-gene effects is difficult however, and methods to exhaustively analyze sets of these variants for interactions are combinatorial in nature thus making them computationally infeasible. Efficient algorithms which can detect interacting SNPs are needed. ReliefF is one such promising algorithm, although it has low success rate for noisy datasets when the interaction effect is small. ReliefF has been paired with an iterative approach, Tuned ReliefF (TuRF, which improves the estimation of weights in noisy data but does not fundamentally change the underlying ReliefF algorithm. To improve the sensitivity of studies using these methods to detect small effects we introduce Spatially Uniform ReliefF (SURF. Results SURF's ability to detect interactions in this domain is significantly greater than that of ReliefF. Similarly SURF, in combination with the TuRF strategy significantly outperforms TuRF alone for SNP selection under an epistasis model. It is important to note that this success rate increase does not require an increase in algorithmic complexity and allows for increased success rate, even with the removal of a nuisance parameter from the algorithm. Conclusion Researchers performing genetic association studies and aiming to discover gene-gene interactions associated with increased disease susceptibility should use SURF in place of ReliefF. For instance, SURF should be

  17. Introduction of an automated mine surveying system - a method for effective control of mining operations

    Energy Technology Data Exchange (ETDEWEB)

    Mazhdrakov, M.

    1987-04-01

    Reviews developments in automated processing of mine survey data in Bulgaria for 1965-1970. This development has occurred in three phases. In the first phase, computers calculated coordinates of mine survey points; in the second phase, these data were electronically processed; in the third phase, surface and underground mine development is controlled by electronic data processing equipment. Centralized and decentralized electronic processing of data has been introduced at major coal mines. The Bulgarian Pravets 82 microcomputer and the ASMO-MINI program package are in current use at major coal mines. A lack of plotters, due to financial limitations, handicaps large-scale application of automated mine surveying in Bulgaria.

  18. U.S. residential consumer product information: Validation of methods for post-stratification weighting of Amazon Mechanical Turk surveys

    Energy Technology Data Exchange (ETDEWEB)

    Greenblatt, Jeffery B. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Yang, Hung-Chia [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Desroches, Louis-Benoit [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Young, Scott J. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Beraki, Bereket [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Price, Sarah K. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Pratt, Stacy [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Willem, Henry [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Donovan, Sally M. [Consultant, Melbourne (Australia)

    2013-04-01

    We present two post-stratification weighting methods to validate survey data collected using Amazon Mechanical Turk (AMT). Two surveys focused on appliance and consumer electronics devices were administered in the spring and summer of 2012 to each of approximately 3,000 U.S. households. Specifically, the surveys asked questions about residential refrigeration products, televisions (TVs) and set-top boxes (STBs). Filtered data were assigned weights using each of two weighting methods, termed “sequential” and “simultaneous,” by examining up to eight demographic variables (income, education, gender, race, Hispanic origin, number of occupants, ages of occupants, and geographic region) in comparison to reference U.S. demographic data from the 2009 Residential Energy Consumption Survey (RECS). Five key questions from the surveys (number of refrigerators, number of freezers, number of TVs, number of STBs and primary service provider) were evaluated with a set of statistical tests to determine whether either method improved the agreement of AMT with reference data, and if so, which method was better. The statistical tests used were: differences in proportions, distributions of proportions (using Pearson’s chi-squared test), and differences in average numbers of devices as functions of all demographic variables. The results indicated that both methods generally improved the agreement between AMT and reference data, sometimes greatly, but that the simultaneous method was usually superior to the sequential method. Some differences in sample populations were found between the AMT and reference data. Differences in the proportion of STBs reflected large changes in the STB market since the time our reference data was acquired in 2009. Differences in the proportions of some primary service providers suggested real sample bias, with the possible explanation that AMT user are more likely to subscribe to providers who also provide home internet service. Differences in

  19. Area specific stripping factors for AGS. A method for extracting stripping factors from survey data

    Energy Technology Data Exchange (ETDEWEB)

    Aage, H.K.; Korsbech, U. [Technical Univ. of Denmark (Denmark)

    2006-04-15

    In order to use Airborne Gamma-ray Spectrometry (AGS) for contamination mapping, for source search etc. one must to be able to eliminate the contribution to the spectra from natural radioactivity. This in general is done by a stripping technique. The parameters for performing a stripping have until recently been measured by recording gamma spectra at special calibration sites (pads). This may be cumbersome and the parameters may not be correct when used at low gamma energies for environmental spectra. During 2000-2001 DTU tested with success a new technique for Carborne Gamma-ray Spectrometry (CGS) where the spectra from the surveyed area (or from a similar area) were used for calculating the stripping parameters. It was possible to calculate usable stripping ratios for a number of low energy windows - and weak source signals not detectable by other means were discovered with the ASS technique. In this report it is shown that the ASS technique also works for AGS data, and it has been used for recent Danish AGS tests with point sources. (Check of calibration of AGS parameters.) By using the ASS technique with the Boden data (Barents Rescue) an exercise source was detected that has not been detected by any of the teams during the exercise. The ASS technique therefore seems to be better for search for radiation anomalies than any other method known presently. The experiences also tell that although the stripping can be performed correctly at any altitude there is a variation of the stripping parameters with altitude that has not yet been quite understood. However, even with the oddly variations the stripping worked as expected. It was also observed that one might calculate a single common set of usable stripping factors for all altitudes from the entire data set i.e. some average a, b and c values. When those stripping factors were used the stripping technique still worked well. (au)

  20. Development and Psychometric Evaluation of the HPV Clinical Trial Survey for Parents (CTSP-HPV) Using Traditional Survey Development Methods and Community Engagement Principles.

    Science.gov (United States)

    Cunningham, Jennifer; Wallston, Kenneth A; Wilkins, Consuelo H; Hull, Pamela C; Miller, Stephania T

    2015-12-01

    This study describes the development and psychometric evaluation of HPV Clinical Trial Survey for Parents with Children Aged 9 to 15 (CTSP-HPV) using traditional instrument development methods and community engagement principles. An expert panel and parental input informed survey content and parents recommended study design changes (e.g., flyer wording). A convenience sample of 256 parents completed the final survey measuring parental willingness to consent to HPV clinical trial (CT) participation and other factors hypothesized to influence willingness (e.g., HPV vaccine benefits). Cronbach's a, Spearman correlations, and multiple linear regression were used to estimate internal consistency, convergent and discriminant validity, and predictively validity, respectively. Internal reliability was confirmed for all scales (a ≥ 0.70.). Parental willingness was positively associated (p < 0.05) with trust in medical researchers, adolescent CT knowledge, HPV vaccine benefits, advantages of adolescent CTs (r range 0.33-0.42), supporting convergent validity. Moderate discriminant construct validity was also demonstrated. Regression results indicate reasonable predictive validity with the six scales accounting for 31% of the variance in parents' willingness. This instrument can inform interventions based on factors that influence parental willingness, which may lead to the eventual increase in trial participation. Further psychometric testing is warranted. © 2015 Wiley Periodicals, Inc.

  1. From Ethnography to Items: A Mixed Methods Approach to Developing a Survey to Examine Graduate Engineering Student Retention

    Science.gov (United States)

    Crede, Erin; Borrego, Maura

    2013-01-01

    As part of a sequential exploratory mixed methods study, 9 months of ethnographically guided observations and interviews were used to develop a survey examining graduate engineering student retention. Findings from the ethnographic fieldwork yielded several themes, including international diversity, research group organization and climate,…

  2. Short assessment of the Big Five: robust across survey methods except telephone interviewing

    OpenAIRE

    Lang, Frieder R.; John, Dennis; Lüdtke, Oliver; Schupp, Jürgen; Wagner, Gert G.

    2011-01-01

    We examined measurement invariance and age-related robustness of a short 15-item Big Five Inventory (BFI–S) of personality dimensions, which is well suited for applications in large-scale multidisciplinary surveys. The BFI–S was assessed in three different interviewing conditions: computer-assisted or paper-assisted face-to-face interviewing, computer-assisted telephone interviewing, and a self-administered questionnaire. Randomized probability samples from a large-scale German panel survey a...

  3. Sexual behaviour research using the survey method: a critique of the literature over the last six years.

    Science.gov (United States)

    Malacad, Brea L; Hess, Gretchen C

    2011-10-01

    The survey method is often used to identify trends in sexual behaviour and attitudes. In order for research conclusions to be valid, however, data gathered from surveys must be unambiguous. For the current paper we reviewed survey research of sexual behaviour published in recent years. Our objective was to identify common methodological issues and provide recommendations for how to address them. We examined 62 articles, published in four prominent sexual health journals over the past six years. We evaluated each article based on how adequately its authors addressed four recurring methodological issues: ambiguous terminology, heterosexual bias, procedures that compromise honesty in responses, and survey language/literacy considerations. The review revealed some recurring issues: 47% of the studies failed to address the question of sexual orientation, sexual behaviour terminology was explicitly defined in only 32% of questionnaires, fewer than 5% of surveys clarified whether the sexual encounters in question were consensual, and 21% of the articles contained no mention of anonymity or confidentiality for participants. These results reveal common issues with survey data that compromise the validity of findings. In order to have confidence in research conclusions and recommendations, it is important that these issues be addressed.

  4. The Second Zambian National Tuberculosis Drug Resistance survey - a comparison of conventional and molecular methods.

    Science.gov (United States)

    Kapata, Nathan; Mbulo, Grace; Cobelens, Frank; de Haas, Petra; Schaap, Ab; Mwamba, Pike; Mwanza, Winnie; Muvwimi, Mweemba; Muyoyeta, Monde; Moyo, Maureen; Mulenga, Lutinala; Grobusch, Martin P; Godfrey-Faussett, Peter; Ayles, Helen

    2015-11-01

    The prevalence of MDR-TB in Zambia was estimated to be 1.8% in 2001. A second drug resistance survey was conducted in 2008 to determine trends; the use of the Genotype MTBDRplus assay was applied to compare results to the gold standard. A two-stage cluster sampling, with health facilities as primary sampling units. Processed sputum specimens were inoculated on solid media for culture; heat-inactivated bacterial suspensions from sputum samples were tested on a commercial line probe assay for the identification of rifampicin and isoniazid resistance. A total of 917 patients with TB were enrolled and 883 (96.3%) analysed. A total of 574 (65%) had LJ results and 824 (93.3%) had results from MTBDRplus assay. The median age was 32, and 63.3% were males. MDR-TB according to LJ-based DST was 1.1% (CI 0.1-2.4) whereas according to MDTBDRplus assay was 1.6% (CI 0.6-2.6). Isoniazid monoresistance in new cases was 2.4% (CI 0.613-4.26) based on LJ results and 5.0% (CI 3.2-6.7) based on the MTBDRplus; in retreatment cases, it was 4.4% (CI 0.3-8.6) and 2.40% (CI <0.1-5.1) on LJ and MTBDRplus, respectively. Rifampicin monoresistance in new cases was 0.1% (CI <0.1-0.4) based on LJ and 0.6% (CI 0.01-1.1) based on the MTBDRplus; in retreatment cases, it was 0% (CI 0-3.8) and 1.8% (CI <0.1-4.0) on LJ and MTBDRplus, respectively. There were no XDR-TB cases found and no association between MDR-TB and HIV. There was no increase in MDR-TB prevalence in Zambia from 2001 to 2008; results from the two methods were similar. Molecular methods were quicker and simpler to use. © 2015 John Wiley & Sons Ltd.

  5. Analyzing Repeated Measures Marginal Models on Sample Surveys with Resampling Methods

    Directory of Open Access Journals (Sweden)

    James D. Knoke

    2005-12-01

    Full Text Available Packaged statistical software for analyzing categorical, repeated measures marginal models on sample survey data with binary covariates does not appear to be available. Consequently, this report describes a customized SAS program which accomplishes such an analysis on survey data with jackknifed replicate weights for which the primary sampling unit information has been suppressed for respondent confidentiality. First, the program employs the Macro Language and the Output Delivery System (ODS to estimate the means and covariances of indicator variables for the response variables, taking the design into account. Then, it uses PROC CATMOD and ODS, ignoring the survey design, to obtain the design matrix and hypothesis test specifications. Finally, it enters these results into another run of CATMOD, which performs automated direct input of the survey design specifications and accomplishes the appropriate analysis. This customized SAS program can be employed, with minor editing, to analyze general categorical, repeated measures marginal models on sample surveys with replicate weights. Finally, the results of our analysis accounting for the survey design are compared to the results of two alternate analyses of the same data. This comparison confirms that such alternate analyses, which do not properly account for the design, do not produce useful results.

  6. Factors Associated with Nursing Activities in Humanitarian Aid and Disaster Relief

    Science.gov (United States)

    Noguchi, Norihito; Inoue, Satoshi; Shimanoe, Chisato; Shibayama, Kaoru; Shinchi, Koichi

    2016-01-01

    Background Although nurses play an important role in humanitarian aid and disaster relief (HA/DR), little is known about the nursing activities that are performed in HA/DR. We aimed to clarify the nursing activities performed by Japanese nurses in HA/DR and to examine the factors associated with the frequency of nursing activities. Methods A self-administered questionnaire survey was completed by 147 nurses with HA/DR experience. The survey extracted information on demographic characteristics, past experience (e.g., disaster medical training experience, HA/DR experience), circumstances surrounding their dispatched to HA/DR (e.g., team size, disaster type, post-disaster phase, mission term), and the frequency of nursing activities performed under HA/DR. The frequency of nursing activities was rated on a 5-point Likert scale. Evaluation of nursing activities was conducted based on the “nursing activity score”, which represents the frequency of each nursing activity. Factors related to the nursing activity score were evaluated by multiple logistic regression analysis. Results Nurses were involved in 27 nursing activities in HA/DR, 10 of which were performed frequently. On analysis, factors significantly associated with nursing activity score were nursing license as a registered nurse (OR 7.79, 95% CI 2.95–20.57), two or more experiences with disaster medical training (OR 2.90 95%, CI 1.12–7.49) and a post-disaster phase of three weeks or longer (OR 8.77, 95% CI 2.59–29.67). Conclusions These results will contribute to the design of evidence-based disaster medical training that improves the quality of nursing activities. PMID:26959351

  7. Reward, motivation and emotion of pain and its relief

    Science.gov (United States)

    Porreca, Frank; Navratilova, Edita

    2016-01-01

    The experience of pain depends on interpretation of context and past experience that guide the choice of an immediate behavioral response and influence future decisions of actions to avoid harm. The aversive qualities of pain underlie its physiological role in learning and motivation. In this review, we highlight findings from human and animal investigations that suggest that both pain, and the relief of pain, are complex emotions that are comprised of feelings and their motivational consequences. Relief of aversive states, including pain, is rewarding. How relief of pain aversiveness occurs is not well understood. Termination of aversive states can directly provide relief as well as reinforce behaviors that result in avoidance of pain. Emerging preclinical data also suggests that relief may elicit a positive hedonic value that results from activation of neural cortical and mesolimbic brain circuits that may also motivate behavior. Brain circuits mediating the reward of pain relief, as well as relief-induced motivation are significantly impacted as pain becomes chronic. In chronic pain states, the negative motivational value of nociception may be increased while the value of the reward of pain relief may decrease. As a consequence, the impact of pain on these ancient, and conserved brain limbic circuits suggest a path forward for discovery of new pain therapies. PMID:28106670

  8. 30 CFR 203.53 - What relief will MMS grant?

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 2 2010-07-01 2010-07-01 false What relief will MMS grant? 203.53 Section 203.53 Mineral Resources MINERALS MANAGEMENT SERVICE, DEPARTMENT OF THE INTERIOR MINERALS REVENUE...-Life Leases § 203.53 What relief will MMS grant? (a) If we approve your application and you meet...

  9. Donation to disaster relief campaigns: underlying social cognitive factors exposed

    NARCIS (Netherlands)

    Oosterhof, Liesbeth; Heuvelman, A.; Peters, O.

    2009-01-01

    number of very serious natural disasters have put an enormous pressure on relief organizations in the last few years. The present study exposes underlying social cognitive factors for donation to relief campaigns. A causal model was constructed, based on social cognitive theory, research on

  10. 46 CFR 154.801 - Pressure relief systems.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Pressure relief systems. 154.801 Section 154.801 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SAFETY... Vent Systems § 154.801 Pressure relief systems. (a) Each cargo tank that has a volume of 20m3 (706 ft.3...

  11. 47 CFR 52.19 - Area code relief.

    Science.gov (United States)

    2010-10-01

    ... meetings to which the telecommunications industry and the public are invited on area code relief for a... 47 Telecommunication 3 2010-10-01 2010-10-01 false Area code relief. 52.19 Section 52.19 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) COMMON CARRIER SERVICES (CONTINUED) NUMBERING...

  12. International survey of methods used in health technology assessment (HTA: does practice meet the principles proposed for good research?

    Directory of Open Access Journals (Sweden)

    Stephens JM

    2012-08-01

    Full Text Available Jennifer M Stephens,1 Bonnie Handke,2 Jalpa A Doshi3 On behalf of the HTA Principles Working Group, part of the International Society for Pharmacoeconomics and Outcomes Research (ISPOR HTA Special Interest Group (SIG1Pharmerit International, Bethesda, MD, USA; 2Medtronic Neuromodulation, Minneapolis, MN, USA; 3Center for Evidence-Based Practice and Center for Health Incentives and Behavioral Economics, Perelman School of Medicine, University of Pennsylvania, Philadelphia, PA, USAObjective: To describe research methods used internationally in health technology assessment (HTA and health-care reimbursement policies; compare the survey findings on research methods and processes to published HTA principles; and discuss important issues/trends reported by HTA bodies related to current research methods and applications of the HTA process.Methods: Representatives from HTA bodies worldwide were recruited to complete an online survey consisting of 47 items within four topics: (1 organizational information and process, (2 primary HTA methodologies and importance of attributes, (3 HTA application and dissemination, and (4 quality of HTA, including key issues. Results were presented as a comparison of current HTA practices and research methods to published HTA principles.Results: The survey was completed by 30 respondents representing 16 countries in five major regions, Australia (n = 3, Canada (n = 2, Europe (n = 17, Latin America (n = 2, and the United States (n = 6. The most common methodologies used were systematic review, meta-analysis, and economic modeling. The most common attributes evaluated were effectiveness (more commonly than efficacy, cost-effectiveness, safety, and quality of life. The attributes assessed, relative importance of the attributes, and conformance with HTA principles varied by region/country. Key issues and trends facing HTA bodies included standardizing methods for economic evaluations and grading of evidence, lack of evidence

  13. Modified dorsal root entry zone lesioning for intractable pain relief in patients with root avulsion injury.

    Science.gov (United States)

    Takai, Keisuke; Taniguchi, Makoto

    2017-08-01

    OBJECTIVE Dorsal root entry zone (DREZ) lesioning has been the most effective surgical treatment for the relief of intractable pain due to root avulsion injury, but residual pain and a decrease in pain relief in the follow-up period have been reported in 23%-70% of patients. Based on pain topography in the most recent studies on neuropathic pain, the authors modified the conventional DREZ lesioning procedure to improve clinical outcomes. The presumed rationale for this procedure is to eliminate the spontaneous discharges of neurons in the superficial spinal dorsal horn as well as wide dynamic range neurons in the deep spinal dorsal horn. METHODS Ten patients with avulsion-related pain underwent surgery between 2011 and 2015. The surgical procedure was described and postoperative pain relief was assessed as follows: excellent (residual pain never exceeded 3 on the visual analog scale [VAS] without medication), good (residual pain never exceeded 5 on the VAS with medication), and poor (residual pain was greater than 5 with medication). Specific perioperative complications were assessed. RESULTS The aim of this surgical procedure was to destroy the deeper layers of the posterior horn of spinal gray matter, which was in contrast to the procedures of Nashold and Sindou, which were to destroy the superficial layers. All patients achieved excellent (n = 7, pain relief without medication) or good (n = 3, pain relief with medication) pain relief postoperatively, and the recurrence of pain was not reported in any patients (median 29 months after surgery, range 12-64 months). Nine patients (90%) achieved complete pain relief (a score of 0 or 1 on the VAS) with or without medication. No surgical site complications such as infection or CSF leakage were noted. No motor deficit was observed in any patient. A sensory deficit was observed in 2 patients and disappeared within 1 month in 1 patient. New pain at the adjacent level of DREZ lesioning was observed in 3 patients and

  14. Sampling in health geography: reconciling geographical objectives and probabilistic methods. An example of a health survey in Vientiane (Lao PDR

    Directory of Open Access Journals (Sweden)

    Bochaton Audrey

    2007-06-01

    Full Text Available Abstract Background Geographical objectives and probabilistic methods are difficult to reconcile in a unique health survey. Probabilistic methods focus on individuals to provide estimates of a variable's prevalence with a certain precision, while geographical approaches emphasise the selection of specific areas to study interactions between spatial characteristics and health outcomes. A sample selected from a small number of specific areas creates statistical challenges: the observations are not independent at the local level, and this results in poor statistical validity at the global level. Therefore, it is difficult to construct a sample that is appropriate for both geographical and probability methods. Methods We used a two-stage selection procedure with a first non-random stage of selection of clusters. Instead of randomly selecting clusters, we deliberately chose a group of clusters, which as a whole would contain all the variation in health measures in the population. As there was no health information available before the survey, we selected a priori determinants that can influence the spatial homogeneity of the health characteristics. This method yields a distribution of variables in the sample that closely resembles that in the overall population, something that cannot be guaranteed with randomly-selected clusters, especially if the number of selected clusters is small. In this way, we were able to survey specific areas while minimising design effects and maximising statistical precision. Application We applied this strategy in a health survey carried out in Vientiane, Lao People's Democratic Republic. We selected well-known health determinants with unequal spatial distribution within the city: nationality and literacy. We deliberately selected a combination of clusters whose distribution of nationality and literacy is similar to the distribution in the general population. Conclusion This paper describes the conceptual reasoning behind

  15. The control of tonic pain by active relief learning.

    Science.gov (United States)

    Zhang, Suyi; Mano, Hiroaki; Lee, Michael; Yoshida, Wako; Kawato, Mitsuo; Robbins, Trevor W; Seymour, Ben

    2018-02-27

    Tonic pain after injury characterises a behavioural state that prioritises recovery. Although generally suppressing cognition and attention, tonic pain needs to allow effective relief learning to reduce the cause of the pain. Here, we describe a central learning circuit that supports learning of relief and concurrently suppresses the level of ongoing pain. We used computational modelling of behavioural, physiological and neuroimaging data in two experiments in which subjects learned to terminate tonic pain in static and dynamic escape-learning paradigms. In both studies, we show that active relief-seeking involves a reinforcement learning process manifest by error signals observed in the dorsal putamen. Critically, this system uses an uncertainty ('associability') signal detected in pregenual anterior cingulate cortex that both controls the relief learning rate, and endogenously and parametrically modulates the level of tonic pain. The results define a self-organising learning circuit that reduces ongoing pain when learning about potential relief. © 2018, Zhang et al.

  16. The control of tonic pain by active relief learning

    Science.gov (United States)

    Mano, Hiroaki; Lee, Michael; Yoshida, Wako; Kawato, Mitsuo; Robbins, Trevor W

    2018-01-01

    Tonic pain after injury characterises a behavioural state that prioritises recovery. Although generally suppressing cognition and attention, tonic pain needs to allow effective relief learning to reduce the cause of the pain. Here, we describe a central learning circuit that supports learning of relief and concurrently suppresses the level of ongoing pain. We used computational modelling of behavioural, physiological and neuroimaging data in two experiments in which subjects learned to terminate tonic pain in static and dynamic escape-learning paradigms. In both studies, we show that active relief-seeking involves a reinforcement learning process manifest by error signals observed in the dorsal putamen. Critically, this system uses an uncertainty (‘associability’) signal detected in pregenual anterior cingulate cortex that both controls the relief learning rate, and endogenously and parametrically modulates the level of tonic pain. The results define a self-organising learning circuit that reduces ongoing pain when learning about potential relief. PMID:29482716

  17. Bilateral CT-guided percutaneous cordotomy for cancer pain relief

    International Nuclear Information System (INIS)

    Yegul, I.; Erhan, E.

    2003-01-01

    AIM: CT-guided percutaneous cordotomy is a useful procedure for treating unilateral cancer pain, however, bilateral cordotomy can be required on some occasions. We evaluated the effectiveness and complications of bilateral cordotomy. MATERIALS AND METHODS: Two hundred and thirty-four patients who suffered from unilateral cancer pain underwent CT-guided percutaneous cordotomy. The procedure was repeated in 22 patients, and nine patients had bilateral cordotomy. Effectiveness and complications were recorded after each procedure. RESULTS: Of nine patents (three women and six men) having bilateral percutaneous cordotomy in our study, four patients had mirror pain after the first procedure. In the remaining five patients the contralateral pain was due to new pain sites. The pain scores before and after the first procedure were 9.3 (range 7-10) and 1.2 (range 0-3), respectively. After the first procedure complete or satisfactory pain relief was achieved in all patients. The duration between the two procedures ranged from 7-243 days (mean 59.8 days). The pain scores before and after the second procedure were 8.4 (range 5-10) and 1.6 (range 0-4), respectively. After the second procedure complete or satisfactory pain relief was reported in all patients. There were no complications in four patients. One patient developed transient motor deficit after the first procedure. Other complications (nausea/vomiting, headache, ipsilateral neck pain, postcordotomy dysesthesia) were mild and transient. CONCLUSION: CT-guided percutaneous cordotomy is a useful procedure for the treatment of severe unilateral cancer pain syndromes. The procedure can be repeated on the other side at least 1 week later. These results show that the success on the second side appears to be similar to the first side with low complication rate for both procedures

  18. Bilateral CT-guided percutaneous cordotomy for cancer pain relief

    Energy Technology Data Exchange (ETDEWEB)

    Yegul, I. E-mail: iyegul@med.ege.edu.tr; Erhan, E. E-mail: elvanerhan@yahoo.com

    2003-11-01

    AIM: CT-guided percutaneous cordotomy is a useful procedure for treating unilateral cancer pain, however, bilateral cordotomy can be required on some occasions. We evaluated the effectiveness and complications of bilateral cordotomy. MATERIALS AND METHODS: Two hundred and thirty-four patients who suffered from unilateral cancer pain underwent CT-guided percutaneous cordotomy. The procedure was repeated in 22 patients, and nine patients had bilateral cordotomy. Effectiveness and complications were recorded after each procedure. RESULTS: Of nine patents (three women and six men) having bilateral percutaneous cordotomy in our study, four patients had mirror pain after the first procedure. In the remaining five patients the contralateral pain was due to new pain sites. The pain scores before and after the first procedure were 9.3 (range 7-10) and 1.2 (range 0-3), respectively. After the first procedure complete or satisfactory pain relief was achieved in all patients. The duration between the two procedures ranged from 7-243 days (mean 59.8 days). The pain scores before and after the second procedure were 8.4 (range 5-10) and 1.6 (range 0-4), respectively. After the second procedure complete or satisfactory pain relief was reported in all patients. There were no complications in four patients. One patient developed transient motor deficit after the first procedure. Other complications (nausea/vomiting, headache, ipsilateral neck pain, postcordotomy dysesthesia) were mild and transient. CONCLUSION: CT-guided percutaneous cordotomy is a useful procedure for the treatment of severe unilateral cancer pain syndromes. The procedure can be repeated on the other side at least 1 week later. These results show that the success on the second side appears to be similar to the first side with low complication rate for both procedures.

  19. Shaded relief, color as height, Fiji

    Science.gov (United States)

    2000-01-01

    The Sovereign Democratic Republic of the Fiji Islands, commonly known as Fiji, is an independent nation consisting of some 332 islands surrounding the Koro Sea in the South Pacific Ocean. This topographic image shows Viti Levu, the largest island in the group. With an area of 10,429 square kilometers (about 4000 square miles), it comprises more than half the area of the Fiji Islands. Suva, the capital city, lies on the southeast shore. The Nakauvadra, the rugged mountain range running from north to south, has several peaks rising above 900 meters (about 3000 feet). Mount Tomanivi, in the upper center, is the highest peak at 1324 meters (4341 feet). The distinct circular feature on the north shore is the Tavua Caldera, the remnant of a large shield volcano that was active about 4 million years ago. Gold has been mined on the margin of the caldera since the 1930's. The Nadrau plateau is the low relief highland in the center of the mountain range. The coastal plains in the west, northwest and southeast account for only 15 percent of Viti Levu's area but are the main centers of agriculture and settlement.This shaded relief image was generated using topographic data from the Shuttle Radar Topography Mission. A computer-generated artificial light source illuminates the elevation data to produce a pattern of light and shadows. Slopes facing the light appear bright, while those facing away are shaded. On flatter surfaces, the pattern of light and shadows can reveal subtle features in the terrain. Colors show the elevation as measured by SRTM. Colors range from green at the lowest elevations top ink at the highest elevations. This image contains about 1300 meters(4300 feet) of total relief.The Shuttle Radar Topography Mission (SRTM), launched on February 11,2000, uses the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar (SIR-C/X-SAR) that flew twice on the Space Shuttle Endeavour in 1994. The mission is designed to collect

  20. The use of systematic and heuristic methods in the basic design cycle: A comparative survey of students' method usage

    DEFF Research Database (Denmark)

    Person, O.; Daalhuizen, Jaap; Gattol, V.

    2013-01-01

    ) synthesis, (3) simulation, (4) evaluation, and (5) decision-making. The results of our study suggest that systematic and heuristic methods fulfil different roles for the students when designing. The students reported to use heuristic methods significantly more for synthesis, while they reported to use...... systematic methods significantly more for evaluation and decision-making. In understanding the potential origin of these use practices, we call for more in-depth studies on method usage in design, for instance related to the role of preference and knowledge on systematic and heuristic methods usage.......In the present paper, we study the reported use of systematic and heuristic methods for 304 students enrolled in a master-level course on design theory and methodology. What to teach design and engineering students about methods is an important topic for discussion. One reason...

  1. [Comparison of dietary survey, frequency and 24 hour urinary Na methods in evaluation of salt intake in the population].

    Science.gov (United States)

    Li, Jianhong; Lu, Zilong; Yan, Liuxia; Zhang, Jiyu; Tang, Junli; Cai, Xiaoning; Guo, Xiaolei; Ma, Jixiang; Xu, Aiqiang

    2014-12-01

    To compare the difference and correlation between dietary salt intakes assessed by 24 hours urinary Na method, food weighted record method and food frequency questionnaire method. All 2 184 subjects aged 18 to 69 were selected by multi stage stratified cluster random sampling method in Shandong province in June to September, 2011. Dietary salt intakes were measured by 24 hours urinary Na method, food weighted record method and food frequency questionnaire method. The information on gender, age, dining locations and labour intensity of members dining at home for 3 days were recorded. And the dietary habits were surveyed by questionnaire. Salt intakes were 14.0, 12.0 and 10.5 g/d assessed by 24 hours urinary Na method, food weighted record method and food frequency questionnaire, respectively. Comparing with 24 hours urinary Na method, salt intakes assessed by food weighted record method and food frequency questionnaire method were 2.0 g (14.3% undervalued) and 3.4 g (24.3% undervalued) less, respectively. Comparing with 24 hours urinary Na method, the proportion of individuals with salt intake over-reported and under-reported were 42.4% (856/2 020) and 55.3% (1 117/2 020) by food weighted record method, and were 20.7% (418/2 020) and 16.3% (329/2 020) by food frequency questionnaire method, respectively; the proportion of individuals with salt intakes within ± 25% of 24 hours urinary Na method were 36.9% (745/2 020) and 28.4% (574/2 020), respectively. Salt intakes assessed by 24 hours urinary method correlated significantly with both salt intakes assessed by food weighted record method and food frequency questionnaire method; the correlation coefficients were 0.13 and 0.07, respectively. With the increasing of salt intakes by subjects' self-judgment, salt intakes were all rising significantly using three survey methods. Salt intakes of three group population of light, moderate and partial taste salty were 13.6, 13.6 and 14.7 g/d by 24 hours urinary Na method (F

  2. Sampling in health geography: reconciling geographical objectives and probabilistic methods. An example of a health survey in Vientiane (Lao PDR).

    Science.gov (United States)

    Vallée, Julie; Souris, Marc; Fournet, Florence; Bochaton, Audrey; Mobillion, Virginie; Peyronnie, Karine; Salem, Gérard

    2007-06-01

    Geographical objectives and probabilistic methods are difficult to reconcile in a unique health survey. Probabilistic methods focus on individuals to provide estimates of a variable's prevalence with a certain precision, while geographical approaches emphasise the selection of specific areas to study interactions between spatial characteristics and health outcomes. A sample selected from a small number of specific areas creates statistical challenges: the observations are not independent at the local level, and this results in poor statistical validity at the global level. Therefore, it is difficult to construct a sample that is appropriate for both geographical and probability methods. We used a two-stage selection procedure with a first non-random stage of selection of clusters. Instead of randomly selecting clusters, we deliberately chose a group of clusters, which as a whole would contain all the variation in health measures in the population. As there was no health information available before the survey, we selected a priori determinants that can influence the spatial homogeneity of the health characteristics. This method yields a distribution of variables in the sample that closely resembles that in the overall population, something that cannot be guaranteed with randomly-selected clusters, especially if the number of selected clusters is small. In this way, we were able to survey specific areas while minimising design effects and maximising statistical precision. We applied this strategy in a health survey carried out in Vientiane, Lao People's Democratic Republic. We selected well-known health determinants with unequal spatial distribution within the city: nationality and literacy. We deliberately selected a combination of clusters whose distribution of nationality and literacy is similar to the distribution in the general population. This paper describes the conceptual reasoning behind the construction of the survey sample and shows that it can be

  3. The relative size of measurement error and attrition error in a panel survey. Comparing them with a new multi-trait multi-method model

    NARCIS (Netherlands)

    Lugtig, Peter

    2017-01-01

    This paper proposes a method to simultaneously estimate both measurement and nonresponse errors for attitudinal and behavioural questions in a longitudinal survey. The method uses a Multi-Trait Multi-Method (MTMM) approach, which is commonly used to estimate the reliability and validity of survey

  4. Discussion on the source survey method in a natural evaporation pond

    International Nuclear Information System (INIS)

    Dai Xiaoshu; Fan Chengrong; Fu Yunshan

    2014-01-01

    A natural evaporation pond intended to be decommissioned. The survey of the pond focused on investigating radioactive contamination distribution and estimating the total amount of deposits in the pond, in order to provide support for subsequent decommissioning activities. Based on the source survey in the pond, this paper introduced how to implement radiation measurements and sampling (such as water and sediment) in the water. The movable work platform was built on the pond to facilitate sampling and measurement. In addition, a sludge sampler had been designed so as to accurately determine the amount of sampling and its depth. This paper also described the distribution of sampling points. (authors)

  5. Pain relief by touch: a quantitative approach.

    Science.gov (United States)

    Mancini, Flavia; Nash, Thomas; Iannetti, Gian Domenico; Haggard, Patrick

    2014-03-01

    Pain relief by touch has been studied for decades in pain neuroscience. Human perceptual studies revealed analgesic effects of segmental tactile stimulation, as compared to extrasegmental touch. However, the spatial organisation of touch-pain interactions within a single human dermatome has not been investigated yet. In 2 experiments we tested whether, how, and where within a dermatome touch modulates the perception of laser-evoked pain. We measured pain perception using intensity ratings, qualitative descriptors, and signal detection measures of sensitivity and response bias. Touch concurrent with laser pulses produced a significant analgesia, and reduced the sensitivity in detecting the energy of laser stimulation, implying a functional loss of information within the ascending Aδ pathway. Touch also produced a bias to judge laser stimuli as less painful. This bias decreased linearly when the distance between the laser and tactile stimuli increased. Thus, our study provides evidence for a spatial organisation of intrasegmental touch-pain interactions. Copyright © 2013 International Association for the Study of Pain. Published by Elsevier B.V. All rights reserved.

  6. Evaluation of reward from pain relief

    Science.gov (United States)

    Navratilova, Edita; Xie, Jennifer Yanhua; King, Tamara; Porreca, Frank

    2014-01-01

    The human experience of pain is multidimensional and comprises sensory, affective, and cognitive dimensions. Preclinical assessment of pain has been largely focused on the sensory features that contribute to nociception. The affective (aversive) qualities of pain are clinically significant but have received relatively less mechanistic investigation in preclinical models. Recently, operant behaviors such as conditioned place preference, avoidance, escape from noxious stimulus, and analgesic drug self-administration have been used in rodents to evaluate affective aspects of pain. An important advance of such operant behaviors is that these approaches may allow the detection and mechanistic investigation of spontaneous neuropathic or ongoing inflammatory/nociceptive (i.e., nonevoked) pain that is otherwise difficult to assess in nonverbal animals. Operant measures may allow the identification of mechanisms that contribute differentially to reflexive hypersensitivity or to pain affect and may inform the decision to progress novel mechanisms to clinical trials for pain therapy. Additionally, operant behaviors may allow investigation of the poorly understood mechanisms and neural circuits underlying motivational aspects of pain and the reward of pain relief. PMID:23496247

  7. Influence of relief on permanent preservation areas.

    Science.gov (United States)

    Dos Santos, Alexandre Rosa; Chimalli, Tessa; Peluzio, João Batista Esteves; da Silva, Aderbal Gomes; Dos Santos, Gleissy Mary Amaral Dino Alves; Lorenzon, Alexandre Simões; Teixeira, Thaisa Ribeiro; de Castro, Nero Lemos Martins; Soares Ribeiro, Carlos Antonio Alvares

    2016-01-15

    Many countries have environmental legislation to protecting natural resources on private property. In Brazil, the Brazilian Forestry Code determines specific areas to maintain with natural vegetation cover, known as areas of permanent preservation (APP). Currently, there are few studies that relate topographic variables on APP. In this context, we sought to evaluate the influence of relief on the conservation of areas of permanent preservation (APP) in the areas surrounding Caparaó National Park, Brazil. By using the chi-squared statistical test, we verified that the presence of forest cover is closely associated with altitude. The classes of APP in better conservation status are slopes in addition to hilltops and mountains, whereas APP streams and springs are among the areas most affected by human activities. The most deforested areas are located at altitudes below 1100.00 m and on slopes less than 45°. All orientations of the sides were significant for APP conservation status, with the southern, southeastern, and southwestern sides showing the lower degrees of impact. The methodology can be adjusted to environmental legislation to other countries.

  8. Design and methodology of a mixed methods follow-up study to the 2014 Ghana Demographic and Health Survey.

    Science.gov (United States)

    Staveteig, Sarah; Aryeetey, Richmond; Anie-Ansah, Michael; Ahiadeke, Clement; Ortiz, Ladys

    2017-01-01

    The intended meaning behind responses to standard questions posed in large-scale health surveys are not always well understood. Systematic follow-up studies, particularly those which pose a few repeated questions followed by open-ended discussions, are well positioned to gauge stability and consistency of data and to shed light on the intended meaning behind survey responses. Such follow-up studies require extensive coordination and face challenges in protecting respondent confidentiality during the process of recontacting and reinterviewing participants. We describe practical field strategies for undertaking a mixed methods follow-up study during a large-scale health survey. The study was designed as a mixed methods follow-up study embedded within the 2014 Ghana Demographic and Health Survey (GDHS). The study was implemented in 13 clusters. Android tablets were used to import reference data from the parent survey and to administer the questionnaire, which asked a mixture of closed- and open-ended questions on reproductive intentions, decision-making, and family planning. Despite a number of obstacles related to recontacting respondents and concern about respondent fatigue, over 92 percent of the selected sub-sample were successfully recontacted and reinterviewed; all consented to audio recording. A confidential linkage between GDHS data, follow-up tablet data, and audio transcripts was successfully created for the purpose of analysis. We summarize the challenges in follow-up study design, including ethical considerations, sample size, auditing, filtering, successful use of tablets, and share lessons learned for future such follow-up surveys.

  9. Offshore observations of eastern red bats (Lasiurus borealis in the Mid-Atlantic United States using multiple survey methods.

    Directory of Open Access Journals (Sweden)

    Shaylyn K Hatch

    Full Text Available Little is known about the migration and movements of migratory tree-roosting bat species in North America, though anecdotal observations of migrating bats over the Atlantic Ocean have been reported since at least the 1890s. Aerial surveys and boat-based surveys of wildlife off the Atlantic Seaboard detected a possible diurnal migration event of eastern red bats (Lasiurus borealis in September 2012. One bat was sighted approximately 44 km east of Rehoboth Beach, Delaware during a boat-based survey. Eleven additional bats were observed between 16.9 and 41.8 km east of New Jersey, Delaware, and Virginia in high definition video footage collected during digital aerial surveys. Observations were collected incidentally as part of a large baseline study of seabird, marine mammal, and sea turtle distributions and movements in the offshore environment. Digital survey methods also allowed for altitude estimation for several of these bats at >100 m above sea level. These observations provide new evidence of bat movements offshore, and offer insight into their flight heights above sea level and the times of day at which such migrations may occur.

  10. A multi-method high-resolution geophysical survey in the Machado de Castro museum, central Portugal

    International Nuclear Information System (INIS)

    Grangeia, Carlos; Matias, Manuel; Hermozilha, Hélder; Figueiredo, Fernando; Carvalho, Pedro; Silva, Ricardo

    2011-01-01

    Restoration of historical buildings is a delicate operation as they are often built over more ancient and important structures. The Machado de Castro Museum, Coimbra, Central Portugal, has suffered several interventions in historical times and lies over the ancient Roman forum of Coimbra. This building went through a restoration project. These works were preceded by an extensive geophysical survey that aimed at investigating subsurface stratigraphy, including archeological remains, and the internal structure of the actual walls. Owing to the needs of the project, geophysical data interpretation required not only integration but also high resolution. The study consisted of data acquisition over perpendicular planes and different levels that required detailed survey planning and integration of data from different locations that complement images of the surveyed area. Therefore a multi-method, resistivity imaging and a 3D ground probing radar (GPR), high-resolution geophysical survey was done inside the museum. Herein, radargrams are compared with the revealed stratigraphy so that signatures are interpreted, characterized and assigned to archeological structures. Although resistivity and GPR have different resolution capabilities, their data are overlapped and compared, bearing in mind the specific characteristics of this survey. It was also possible to unravel the inner structure of the actual walls, to establish connections between walls, foundations and to find older remains with the combined use and spatial integration of the GPR and resistivity imaging data

  11. The use of systematic and heuristic methods in the basic design cycle : A comparative survey of students' method usage

    NARCIS (Netherlands)

    Person, F.E.O.K.; Daalhuizen, J.J.; Gattol, V.

    2013-01-01

    In the present paper, we study the reported use of systematic and heuristic methods for 304 students enrolled in a master-level course on design theory and methodology. What to teach design and engineering students about methods is an important topic for discussion. One reason for this is that the

  12. Methods of Model Reduction for Large-Scale Biological Systems: A Survey of Current Methods and Trends.

    Science.gov (United States)

    Snowden, Thomas J; van der Graaf, Piet H; Tindall, Marcus J

    2017-07-01

    Complex models of biochemical reaction systems have become increasingly common in the systems biology literature. The complexity of such models can present a number of obstacles for their practical use, often making problems difficult to intuit or computationally intractable. Methods of model reduction can be employed to alleviate the issue of complexity by seeking to eliminate those portions of a reaction network that have little or no effect upon the outcomes of interest, hence yielding simplified systems that retain an accurate predictive capacity. This review paper seeks to provide a brief overview of a range of such methods and their application in the context of biochemical reaction network models. To achieve this, we provide a brief mathematical account of the main methods including timescale exploitation approaches, reduction via sensitivity analysis, optimisation methods, lumping, and singular value decomposition-based approaches. Methods are reviewed in the context of large-scale systems biology type models, and future areas of research are briefly discussed.

  13. The Tianjin Mental Health Survey (TJMHS) : study rationale, design and methods

    NARCIS (Netherlands)

    Yin, Huifang; Phillips, Michael R; Wardenaar, Klaas J; Xu, Guangming; Ormel, Johan; Tian, Hongjun; Schoevers, Robert A

    Mental health in China is of growing concern to both policy-makers and researchers. The Tianjin Mental Health Survey (TJMHS) was conducted between July 2011 and March 2012 to assess the prevalence and risk factors of mental disorders in the context of recent economic growth and other

  14. Sample survey methods as a quality assurance tool in a general practice immunisation audit.

    Science.gov (United States)

    Cullen, R

    1994-04-27

    In a multidoctor family practice there are often just too many sets of patients records to make it practical to repeat an audit by census of even an age band of the practice on a regular basis. This paper attempts to demonstrate how sample survey methodology can be incorporated into the quality assurance cycle. A simple random sample (with replacement) of 120 from 580 children with permanent records who were aged between 6 weeks and 2 years old from an Auckland general practice was performed, with sample size selected to give a predetermined precision. The survey was then repeated after 4 weeks. Both surveys were able to be completed within the course of a normal working day. An unexpectedly low level of under 2 years olds that were recorded as not overdue for any immunisations was found (22.5%) with only a modest improvement after a standard telephone/letter catch up campaign. Seventy-two percent of the sample held a group one community services card. The advantages of properly conducted sample surveys in producing useful estimates of known precision without disrupting office routines excessively were demonstrated. Through some attention to methodology, the trauma of a practice census can be avoided.

  15. Engaging Students in Survey Research Projects across Research Methods and Statistics Courses

    Science.gov (United States)

    Lovekamp, William E.; Soboroff, Shane D.; Gillespie, Michael D.

    2017-01-01

    One innovative way to help students make sense of survey research has been to create a multifaceted, collaborative assignment that promotes critical thinking, comparative analysis, self-reflection, and statistical literacy. We use a short questionnaire adapted from the Higher Education Research Institute's Cooperative Institutional Research…

  16. Design, implementation, and analysis methods for the National Woodland Owner Survey

    Science.gov (United States)

    Brett J. Butler; Earl C. Leatherberry; Michael S. Williams; Michael S. Williams

    2005-01-01

    The National Woodland Owner Survey (NWOS) is conducted by the USDA Forest Service, Forest Inventory and Analysis program to increase our understanding of private forest-land owners in the United States. The information is intended to help policy makers, resource managers, and others interested in the forest resources of the United States better understand the social...

  17. USDA Forest Service National Woodland Owner Survey, 2011-2013: design, implementation, and estimation methods

    Science.gov (United States)

    Brett J. Butler; Brenton J. Dickinson; Jaketon H. Hewes; Sarah M. Butler; Kyle Andrejczyk; Marla. Markowski-Lindsay

    2016-01-01

    The National Woodland Owner Survey (NWOS) is conducted by the U.S. Forest Service, Forest Inventory and Analysis program to increase the understanding of the attitudes, behaviors, and demographics of private forest and woodland ownerships across the United States. The information is intended to help policy makers, resource managers, educators, service providers, and...

  18. Survey of Processing Methods for High Strength High Conductivity Wires for High Field Magnet Applications

    Energy Technology Data Exchange (ETDEWEB)

    Han, K.; Embury, J.D.

    1998-10-01

    This paper will deal with the basic concepts of attaining combination of high strength and high conductivity in pure materials, in-situ composites and macrocomposites. It will survey current attainments, and outline where some future developments may lie in developing wire products that are close to the theoretical strength of future magnet applications.

  19. Evaluating a new method for reconstructing forest conditions from General Land Office survey records

    Science.gov (United States)

    Carrie R. Levine; Charles V. Cogbill; Brandon M. Collins; Andrew J. Larson; James A. Lutz; Malcolm P. North; Christina M. Restaino; Hugh D. Safford; Scott L. Stephens; John J. Battles

    2017-01-01

    Historical forest conditions are often used to inform contemporary management goals because historical forests are considered to be resilient to ecological disturbances. The General Land Office (GLO) surveys of the late 19th and early 20th centuries provide regionally quasi-contiguous data sets of historical forests across much of the Western United States....

  20. Survey of Processing Methods for High Strength High Conductivity Wires for High Field Magnet Applications

    International Nuclear Information System (INIS)

    Han, K.; Embury, J.D.

    1998-01-01

    This paper will deal with the basic concepts of attaining combination of high strength and high conductivity in pure materials, in-situ composites and macrocomposites. It will survey current attainments, and outline where some future developments may lie in developing wire products that are close to the theoretical strength of future magnet applications

  1. Text analysis of open-ended survey responses : a complementary method to preference mapping

    NARCIS (Netherlands)

    ten Kleij, F; Musters, PAD

    The present study illustrates the use of computer-aided text analysis to evaluate the content of open-ended survey responses. During an in-hall test, different varieties of mayonnaise were evaluated by 165 respondents on a 10-point liking scale, with the option to freely comment on these

  2. Switching to smokeless tobacco as a smoking cessation method: evidence from the 2000 National Health Interview Survey

    Directory of Open Access Journals (Sweden)

    Phillips Carl V

    2008-05-01

    Full Text Available Abstract Background Although smokeless tobacco (ST use has played a major role in the low smoking prevalence among Swedish men, there is little information at the population level about ST as a smoking cessation aid in the U.S. Methods We used the 2000 National Health Interview Survey to derive population estimates for the number of smokers who had tried twelve methods in their most recent quit attempt, and for the numbers and proportions who were former or current smokers at the time of the survey. Results An estimated 359,000 men switched to smokeless tobacco in their most recent quit attempt. This method had the highest proportion of successes among those attempting it (73%, representing 261,000 successful quitters (switchers. In comparison, the nicotine patch was used by an estimated 2.9 million men in their most recent quit attempt, and almost one million (35% were former smokers at the time of the survey. Of the 964,000 men using nicotine gum, about 323,000 (34% became former smokers. Of the 98,000 men who used the nicotine inhaler, 27,000 quit successfully (28%. None of the estimated 14,000 men who tried the nicotine nasal spray became former smokers. Forty-two percent of switchers also reported quitting smoking all at once, which was higher than among former smokers who used medications (8–19%. Although 40% of switchers quit smoking less than 5 years before the survey, 21% quit over 20 years earlier. Forty-six percent of switchers were current ST users at the time of the survey. Conclusion Switching to ST compares very favorably with pharmaceutical nicotine as a quit-smoking aid among American men, despite the fact that few smokers know that the switch provides almost all of the health benefits of complete tobacco abstinence. The results of this study show that tobacco harm reduction is a viable cessation option for American smokers.

  3. Identifying research priorities for public health research to address health inequalities: use of Delphi-like survey methods.

    Science.gov (United States)

    Turner, S; Ollerhead, E; Cook, A

    2017-10-09

    In the funding of health research and public health research it is vital that research questions posed are important and that funded research meets a research need or a gap in evidence. Many methods are used in the identification of research priorities, however, these can be resource intensive, costly and logistically challenging. Identifying such research priorities can be particularly challenging for complex public health problems as there is a need to consult a number of experts across disciplines and with a range of expertise. This study investigated the use of Delphi-like survey methods in identifying important research priorities relating to health inequalities and framing tractable research questions for topic areas identified. The study was conducted in two phases, both using Delphi-like survey methods. Firstly, public health professionals with an interest in health inequalities were asked to identify research priorities. Secondly academic researchers were asked to frame tractable research questions relating to the priorities identified. These research priorities identified using Delphi-like survey methods were subsequently compared to those identified using different methods. A total of 52 public health professionals and 21 academics across the United Kingdom agreed to take part. The response rates were high, from public health professionals across three survey rounds (69%, 50% and 40%) and from academics across one round (52%), indicating that participants were receptive to the method and motivated to respond. The themes identified as encompassing the most important research priorities were mental health, healthy environment and health behaviours. Within these themes, the topic areas that emerged most strongly included community interventions for prevention of mental health problems and the food and alcohol environment. Some responses received from academic researchers were (as requested) in the form of tractable research questions, whereas others

  4. The cosmological analysis of X-ray cluster surveys - I. A new method for interpreting number counts

    Science.gov (United States)

    Clerc, N.; Pierre, M.; Pacaud, F.; Sadibekova, T.

    2012-07-01

    We present a new method aimed at simplifying the cosmological analysis of X-ray cluster surveys. It is based on purely instrumental observable quantities considered in a two-dimensional X-ray colour-magnitude diagram (hardness ratio versus count rate). The basic principle is that even in rather shallow surveys, substantial information on cluster redshift and temperature is present in the raw X-ray data and can be statistically extracted; in parallel, such diagrams can be readily predicted from an ab initio cosmological modelling. We illustrate the methodology for the case of a 100-deg2XMM survey having a sensitivity of ˜10-14 erg s-1 cm-2 and fit at the same time, the survey selection function, the cluster evolutionary scaling relations and the cosmology; our sole assumption - driven by the limited size of the sample considered in the case study - is that the local cluster scaling relations are known. We devote special attention to the realistic modelling of the count-rate measurement uncertainties and evaluate the potential of the method via a Fisher analysis. In the absence of individual cluster redshifts, the count rate and hardness ratio (CR-HR) method appears to be much more efficient than the traditional approach based on cluster counts (i.e. dn/dz, requiring redshifts). In the case where redshifts are available, our method performs similar to the traditional mass function (dn/dM/dz) for the purely cosmological parameters, but constrains better parameters defining the cluster scaling relations and their evolution. A further practical advantage of the CR-HR method is its simplicity: this fully top-down approach totally bypasses the tedious steps consisting in deriving cluster masses from X-ray temperature measurements.

  5. Evaluation of alternative age-based methods for estimating relative abundance from survey data in relation to assessment models

    DEFF Research Database (Denmark)

    Berg, Casper Willestofte; Nielsen, Anders; Kristensen, Kasper

    2014-01-01

    Indices of abundance from fishery-independent trawl surveys constitute an important source of information for many fish stock assessments. Indices are often calculated using area stratified sample means on age-disaggregated data, and finally treated in stock assessment models as independent...... observations. We evaluate a series of alternative methods for calculating indices of abundance from trawl survey data (delta-lognormal, delta-gamma, and Tweedie using Generalized Additive Models) as well as different error structures for these indices when used as input in an age-based stock assessment model...... the different indices produced. The stratified mean method is found much more imprecise than the alternatives based on GAMs, which are found to be similar. Having time-varying index variances is found to be of minor importance, whereas the independence assumption is not only violated but has significant impact...

  6. Testing survey-based methods for rapid monitoring of child mortality, with implications for summary birth history data.

    Science.gov (United States)

    Brady, Eoghan; Hill, Kenneth

    2017-01-01

    Under-five mortality estimates are increasingly used in low and middle income countries to target interventions and measure performance against global development goals. Two new methods to rapidly estimate under-5 mortality based on Summary Birth Histories (SBH) were described in a previous paper and tested with data available. This analysis tests the methods using data appropriate to each method from 5 countries that lack vital registration systems. SBH data are collected across many countries through censuses and surveys, and indirect methods often rely upon their quality to estimate mortality rates. The Birth History Imputation method imputes data from a recent Full Birth History (FBH) onto the birth, death and age distribution of the SBH to produce estimates based on the resulting distribution of child mortality. DHS FBHs and MICS SBHs are used for all five countries. In the implementation, 43 of 70 estimates are within 20% of validation estimates (61%). Mean Absolute Relative Error is 17.7.%. 1 of 7 countries produces acceptable estimates. The Cohort Change method considers the differences in births and deaths between repeated Summary Birth Histories at 1 or 2-year intervals to estimate the mortality rate in that period. SBHs are taken from Brazil's PNAD Surveys 2004-2011 and validated against IGME estimates. 2 of 10 estimates are within 10% of validation estimates. Mean absolute relative error is greater than 100%. Appropriate testing of these new methods demonstrates that they do not produce sufficiently good estimates based on the data available. We conclude this is due to the poor quality of most SBH data included in the study. This has wider implications for the next round of censuses and future household surveys across many low- and middle- income countries.

  7. THE APPLICATION OF CONTINUOUS WAVELET TRANSFORM BASED FOREGROUND SUBTRACTION METHOD IN 21 cm SKY SURVEYS

    International Nuclear Information System (INIS)

    Gu Junhua; Xu Haiguang; Wang Jingying; Chen Wen; An Tao

    2013-01-01

    We propose a continuous wavelet transform based non-parametric foreground subtraction method for the detection of redshifted 21 cm signal from the epoch of reionization. This method works based on the assumption that the foreground spectra are smooth in frequency domain, while the 21 cm signal spectrum is full of saw-tooth-like structures, thus their characteristic scales are significantly different. We can distinguish them in the wavelet coefficient space easily and perform the foreground subtraction. Compared with the traditional spectral fitting based method, our method is more tolerant to complex foregrounds. Furthermore, we also find that when the instrument has uncorrected response error, our method can also work significantly better than the spectral fitting based method. Our method can obtain similar results with the Wp smoothing method, which is also a non-parametric method, but our method consumes much less computing time

  8. A survey of castration methods and associated livestock management practices performed by bovine veterinarians in the United States.

    Science.gov (United States)

    Coetzee, Johann F; Nutsch, Abbey L; Barbur, Laura A; Bradburn, Ryan M

    2010-03-03

    Castration of male calves destined for beef production is a common management practice performed in the United States amounting to approximately 15 million procedures per year. Societal concern about the moral and ethical treatment of animals is increasing. Therefore, production agriculture is faced with the challenge of formulating animal welfare policies relating to routine management practices such as castration. To enable the livestock industry to effectively respond to these challenges there is a need for more data on management practices that are commonly used in cattle production systems. The objective of this survey was to describe castration methods, adverse events and husbandry procedures performed by U.S. veterinarians at the time of castration. Invitations to participate in the survey were sent to email addresses of 1,669 members of the American Association of Bovine Practitioners and 303 members of the Academy of Veterinary Consultants. After partially completed surveys and missing data were omitted, 189 responses were included in the analysis. Surgical castration with a scalpel followed by testicular removal by twisting (calves 90 kg) was the most common method of castration used. The potential risk of injury to the operator, size of the calf, handling facilities and experience with the technique were the most important considerations used to determine the method of castration used. Swelling, stiffness and increased lying time were the most prevalent adverse events observed following castration. One in five practitioners report using an analgesic or local anesthetic at the time of castration. Approximately 90% of respondents indicated that they vaccinate and dehorn calves at the time of castration. Over half the respondents use disinfectants, prophylactic antimicrobials and tetanus toxoid to reduce complications following castration. The results of this survey describe current methods of castration and associated management practices employed by

  9. Motivation of Scandinavian Knowledge Workers : a survey of methods and their effectiveness

    OpenAIRE

    Rasmussen, Frode A S Storesund and Janus G

    2011-01-01

    The aim of this thesis was to identify and examine contemporary motivational theories and see how they fit to the Scandinavian knowledge worker. Two theories (SDT and 4-drive) were selected for empirical research. One survey of a total of 139 respondents from organisations located in Scandinavia showed that the SDT theory cannot be considered more effective than other motivational theories when it comes to motivation of Scandinavian knowledge workers. It was further shown that 4-drive theory ...

  10. Recruitment methods for survey research: Findings from the Mid-South Clinical Data Research Network.

    Science.gov (United States)

    Heerman, William J; Jackson, Natalie; Roumie, Christianne L; Harris, Paul A; Rosenbloom, S Trent; Pulley, Jill; Wilkins, Consuelo H; Williams, Neely A; Crenshaw, David; Leak, Cardella; Scherdin, Jon; Muñoz, Daniel; Bachmann, Justin; Rothman, Russell L; Kripalani, Sunil

    2017-11-01

    The objective of this study was to report survey response rates and demographic characteristics of eight recruitment approaches to determine acceptability and effectiveness of large-scale patient recruitment among various populations. We conducted a cross sectional analysis of survey data from two large cohorts. Patients were recruited from the Mid-South Clinical Data Research Network using clinic-based recruitment, research registries, and mail, phone, and email approaches. Response rates are reported as patients who consented for the survey divided by the number of eligible patients approached. We contacted more than 90,000 patients and 13,197 patients completed surveys. Median age was 56.3years (IQR 40.9, 67.4). Racial/ethnic distribution was 84.1% White, non-Hispanic; 9.9% Black, non-Hispanic; 1.8% Hispanic; and 4.0% other, non-Hispanic. Face-to-face recruitment had the highest response rate of 94.3%, followed by participants who "opted-in" to a registry (76%). The lowest response rate was for unsolicited emails from the clinic (6.1%). Face-to-face recruitment enrolled a higher percentage of participants who self-identified as Black, non-Hispanic compared to other approaches (18.6% face-to-face vs. 8.4% for email). Technology-enabled recruitment approaches such as registries and emails are effective for recruiting but may yield less racial/ethnic diversity compared to traditional, more time-intensive approaches. Copyright © 2017. Published by Elsevier Inc.

  11. HMOs and physician recruiting: a survey of problems and methods among group practice plans.

    OpenAIRE

    Fink, R

    1981-01-01

    A mail survey was conducted among 69 group practice health maintenance organizations (HMOs) to collect information on the recruiting of primary care physicians and specialists. In reporting on difficulties in recruiting physicians for primary care, the medical directors of HMOs indicated that the greatest problem was locating obstetrician-gynecologists. Among specialists, recruiting for orthopedists was reported as being most difficult, although plans that employ neurologists and anesthesiolo...

  12. A novel upward-looking hydroacoustic method for improving pelagic fish surveys

    Czech Academy of Sciences Publication Activity Database

    Baran, Roman; Jůza, Tomáš; Tušer, Michal; Balk, Helge; Blabolil, Petr; Čech, Martin; Draštík, Vladislav; Frouzová, Jaroslava; Jayasinghe, Asanka D.; Koliada, Ievgen; Mrkvička, Tomáš; Muška, Milan; Ricard, Daniel; Sajdlová, Zuzana; Vejřík, Lukáš; Kubečka, Jan

    2017-01-01

    Roč. 7, JUL (2017), č. článku 4823. ISSN 2045-2322 R&D Projects: GA MŠk(CZ) EE2.3.20.0204; GA MŠk(CZ) EE2.3.30.0032 Institutional support: RVO:60077344 Keywords : horizontal acoustic surveys * target-strength * vertical-distribution * spatial-distribution * in-situ Subject RIV: EH - Ecology, Behaviour OBOR OECD: Marine biology, freshwater biology, limnology Impact factor: 4.259, year: 2016

  13. A mixed methods survey of social anxiety, anxiety, depression and wig use in alopecia

    OpenAIRE

    Montgomery, K.; White, C.; Thompson, A. R.

    2017-01-01

    Objectives This study aimed to examine levels of social anxiety, anxiety and depression reported by people with alopecia as a result of a dermatological condition and associations with wig use. The study also sought to report on experiences of wearing wigs in social situations and the relationship with social confidence.\\ud \\ud Design A cross-sectional survey was sent by email to the Alopecia UK charity mailing list and advertised on social media.\\ud \\ud Participants Inclusion criteria were a...

  14. Clinical Reasoning: Survey of Teaching Methods, Integration, and Assessment in Entry-Level Physical Therapist Academic Education.

    Science.gov (United States)

    Christensen, Nicole; Black, Lisa; Furze, Jennifer; Huhn, Karen; Vendrely, Ann; Wainwright, Susan

    2017-02-01

    Although clinical reasoning abilities are important learning outcomes of physical therapist entry-level education, best practice standards have not been established to guide clinical reasoning curricular design and learning assessment. This research explored how clinical reasoning is currently defined, taught, and assessed in physical therapist entry-level education programs. A descriptive, cross-sectional survey was administered to physical therapist program representatives. An electronic 24-question survey was distributed to the directors of 207 programs accredited by the Commission on Accreditation in Physical Therapy Education. Descriptive statistical analysis and qualitative content analysis were performed. Post hoc demographic and wave analyses revealed no evidence of nonresponse bias. A response rate of 46.4% (n=96) was achieved. All respondents reported that their programs incorporated clinical reasoning into their curricula. Only 25% of respondents reported a common definition of clinical reasoning in their programs. Most respondents (90.6%) reported that clinical reasoning was explicit in their curricula, and 94.8% indicated that multiple methods of curricular integration were used. Instructor-designed materials were most commonly used to teach clinical reasoning (83.3%). Assessment of clinical reasoning included practical examinations (99%), clinical coursework (94.8%), written examinations (87.5%), and written assignments (83.3%). Curricular integration of clinical reasoning-related self-reflection skills was reported by 91%. A large number of incomplete surveys affected the response rate, and the program directors to whom the survey was sent may not have consulted the faculty members who were most knowledgeable about clinical reasoning in their curricula. The survey construction limited some responses and application of the results. Although clinical reasoning was explicitly integrated into program curricula, it was not consistently defined, taught, or

  15. Methods used to conduct the pan-European Union survey on consumer attitudes to physical activity, body weight and health.

    Science.gov (United States)

    Kearney, J M; Kearney, M J; McElhone, S; Gibney, M J

    1999-03-01

    The purpose of conducting this survey was to identify data on consumer attitudes towards and beliefs about physical activity, body weight and health among the 15 countries of the EU. A cross-sectional study to get a picture of the attitudes to physical activity, body weight and health in the EU. For this, it was considered important that samples be nationally representative so that inferences drawn from the data could be applied to the population in each country as well as to the EU population as a whole. Using a non-probability sampling method employing quota controls (and the national weight) we obtained large sample sizes from each country which were nationally representative in terms of the variables age, sex and regional distribution. To ensure samples were truly nationally representative a national weight was used when analysing the data using the same characteristics as those used to define quotas. When examining pooled estimates for the total EU sample a population weight was applied. In total, 15,239 subjects aged 15 years and upwards in the EU completed the survey. This article gives details on the methods used in carrying out the survey from design of the questionnaire to sample selection, questionnaire administration and analysis of the data. The methods and their limitations are discussed.

  16. Survey of methods used to determine if a patient has a deep vein thrombosis: An exploratory research report.

    Science.gov (United States)

    Heick, John D; Farris, James W

    2017-09-01

    The use of evidence-based practice (EBP) is encouraged in the physical therapy profession, but integrating evidence into practice can be difficult for clinicians because of lack of time and other constraints. To survey physical therapy clinical instructors and determine the methods they use for screening for deep vein thrombosis (DVT), a type of venous thromboembolism (VTE) in the lower extremities. Exploratory survey. Twelve survey questions written specifically for this study were sent to a convenience sample of clinical instructors associated with seven universities across 43 states. Eight hundred fifty clinical instructors (22.4% response rate) completed the survey. Of those who responded, 80.5% were taught to use Homans sign to screen for a possible DVT in their entry-level education and 67.9% continued to use Homans sign in clinical practice. Regardless of post-graduate education, respondents were more likely to choose Homans sign than a clinical decision rule (CDR) to screen for a suspected DVT. Additionally, nearly two-thirds of respondents failed to correctly identify one or more of the major risk factors for developing a DVT/VTE. The response rate was 22.4% and therefore may not fully represent the population of physical therapy clinical instructors in the United States. Results from this exploratory survey indicated that approximately two-thirds of physical therapy clinical instructors used outdated DVT/VTE screening methods that they were taught in their entry-level education and nearly two-thirds did not identify the major risk factors associated with DVT/VTE. These results suggest that change is necessary in physical therapy education, clinical practice, and continuing professional development to ensure a more evidenced-based identification of DVT and VTE.

  17. Utilizing the Total Design Method in medicine: maximizing response rates in long, non-incentivized, personal questionnaire postal surveys.

    Science.gov (United States)

    Kazzazi, Fawz; Haggie, Rebecca; Forouhi, Parto; Kazzazi, Nazar; Malata, Charles M

    2018-01-01

    Maximizing response rates in questionnaires can improve their validity and quality by reducing non-response bias. A comprehensive analysis is essential for producing reasonable conclusions in patient-reported outcome research particularly for topics of a sensitive nature. This often makes long (≥7 pages) questionnaires necessary but these have been shown to reduce response rates in mail surveys. Our work adapted the "Total Design Method," initially produced for commercial markets, to raise response rates in a long (total: 11 pages, 116 questions), non-incentivized, very personal postal survey sent to almost 350 women. A total of 346 women who had undergone mastectomy and immediate breast reconstruction from 2008-2014 (inclusive) at Addenbrooke's University Hospital were sent our study pack (Breast-Q satisfaction questionnaire and support documents) using our modified "Total Design Method." Participants were sent packs and reminders according to our designed schedule. Of the 346 participants, we received 258 responses, an overall response rate of 74.5% with a useable response rate of 72.3%. One hundred and six responses were received before the week 1 reminder (30.6%), 120 before week 3 (34.6%), 225 before the week 7 reminder (64.6%) and the remainder within 3 weeks of the final pack being sent. The median age of patients that the survey was sent to, and the median age of the respondents, was 54 years. In this study, we have demonstrated the successful implementation of a novel approach to postal surveys. Despite the length of the questionnaire (nine pages, 116 questions) and limitations of expenses to mail a survey to ~350 women, we were able to attain a response rate of 74.6%.

  18. A clinical trial comparing Lanconone® with ibuprofen for rapid relief in acute joint pain.

    Science.gov (United States)

    Girandola, Robert N; Srivastava, Shalini; Loullis, Costas C

    2016-04-06

    To study the effect of Lanconone® (1000 mg) on acute pain on exertion as compared to the standard of care, Ibuprofen (400 mg). The study recruited 72 subjects diagnosed with mild to moderate knee joint pain on exertion. Subjects with Pain Visual Analogue Scale of more than 40 mm were included. Uphill walking was provided as the stressor using Naughton's protocol on a treadmill. The subjects walked for 10 minutes continuously followed by a rest period and baseline pain score for index knee joint was recorded. Subjects were administered a single dose of Lanconone® (1000 mg)/Ibuprofen (400 mg). Thereafter the same stressor was provided at 0.5, 1, 2, 3, 4, and 6 hours, subsequently, pain scores were recorded on a visual analogue scale. Double stopwatch method was used to evaluate the onset of pain relief and time taken to meaningful pain relief. Both Lanconone® and Ibuprofen showed the first perceived pain relief at 65.31 ± 35.57 mins as compared to 60.82 ± 32.56 mins respectively. The mean time taken to experience meaningful pain relief in Lanconone® group was 196.59 ± 70.85 mins compared to 167.13 ± 71.41 mins amongst Ibuprofen group. The meaningful pain relief continued for 6 hours. The current study successfully demonstrated rapid pain-relieving potential of Lanconone® which was comparable to Ibuprofen. No adverse event related to the interventions was reported in the study. Clinical trials.gov NCT02417506 . 21 January 2015.

  19. Effectiveness of the World Health Organization cancer pain relief guidelines: an integrative review

    Science.gov (United States)

    Carlson, Cathy L

    2016-01-01

    Inadequate cancer pain relief has been documented extensively across historical records. In response, in 1986, the World Health Organization (WHO) developed guidelines for cancer pain treatment. The purpose of this paper is to disseminate the results of a comprehensive, integrative review of studies that evaluate the effectiveness of the WHO guidelines. Studies were included if they: 1) identified patients treated with the guidelines, 2) evaluated self-reported pain, 3) identified instruments used, 4) provided data documenting pain relief, and 5) were written in English. Studies were coded for duration of treatment, definition of pain relief, instruments used, findings related to pain intensity or relief, and whether measures were used other than the WHO analgesic ladder. Twenty-five studies published since 1987 met the inclusion criteria. Evidence indicates 20%–100% of patients with cancer pain can be provided pain relief with the use of the WHO guidelines – while considering their status of treatment or end-of-life care. Due to multiple limitations in included studies, analysis was limited to descriptions. Future research to examine the effectiveness of the WHO guidelines needs to consider recommendations to facilitate study comparisons by standardizing outcome measures. Recent studies have reported that patients with cancer experience pain at moderate or greater levels. The WHO guidelines reflect the knowledge and effectual methods to relieve most cancer pain, but the guidelines are not being adequately employed. Part of the explanation for the lack of adoption of the WHO guidelines is that they may be considered outdated by many because they are not specific to the pharmacological and interventional options used in contemporary pain management practices. The conundrum of updating the WHO guidelines is to encompass the latest pharmacological and interventional innovations while maintaining its original simplicity. PMID:27524918

  20. The Use of Religious Coping Methods in a Secular Society: A Survey Study Among Cancer Patients in Sweden.

    Science.gov (United States)

    Ahmadi, Nader; Ahmadi, Fereshteh

    2017-07-01

    In the present article, based on results from a survey study in Sweden among 2,355 cancer patients, the role of religion in coping is discussed. The survey study, in turn, was based on earlier findings from a qualitative study of cancer patients in Sweden. The purpose of the present survey study was to determine to what extent results obtained in the qualitative study can be applied to a wider population of cancer patients in Sweden. The present study shows that use of religious coping methods is infrequent among cancer patients in Sweden. Besides the two methods that are ranked in 12th and 13th place, that is, in the middle (Listening to religious music and Praying to God to make things better), the other religious coping methods receive the lowest rankings, showing how nonsignificant such methods are in coping with cancer in Sweden. However, the question of who turns to God and who is self-reliant in a critical situation is too complicated to be resolved solely in terms of the strength of individuals' religious commitments. In addition to background and situational factors, the culture in which the individual was socialized is an important factor. Regarding the influence of background variables, the present results show that gender, age , and area of upbringing played an important role in almost all of the religious coping methods our respondents used. In general, people in the oldest age-group, women, and people raised in places with 20,000 or fewer residents had a higher average use of religious coping methods than did younger people, men, and those raised in larger towns.

  1. Methods of the National Nutrition Survey 1999 Metodología de la Encuesta Nacional de Nutrición 1999

    OpenAIRE

    Elsa Resano-Pérez; Ignacio Méndez-Ramírez; Teresa Shamah-Levy; Juan A Rivera; Jaime Sepúlveda-Amor

    2003-01-01

    OBJECTIVE: To describe the methods and analyses of the 1999 National Nutrition Survey (NNS-99). MATERIAL AND METHODS: The 1999 National Nutrition Survey (NNS-99) is a probabilistic survey with nationwide representativity. The NNS-99 included four regions and urban and rural areas of Mexico. The last sampling units were households, selected through stratified cluster sampling. The study population consisted of children under five years of age, school-age children (6-11 years), and women of chi...

  2. Application of QMC methods to PDEs with random coefficients : a survey of analysis and implementation

    KAUST Repository

    Kuo, Frances; Dick, Josef; Le Gia, Thong; Nichols, James; Sloan, Ian; Graham, Ivan; Scheichl, Robert; Nuyens, Dirk; Schwab, Christoph

    2016-01-01

    have been written on this topic using a variety of methods. QMC methods are relatively new to this application area. I will consider different models for the randomness (uniform versus lognormal) and contrast different QMC algorithms (single-level

  3. U.S. Coastal Relief Model - Northwest Pacific

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — NGDC's U.S. Coastal Relief Model (CRM) provides the first comprehensive view of the U.S. coastal zone integrating offshore bathymetry with land topography into a...

  4. U.S. Coastal Relief Model - Western Gulf of Mexico

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — NGDC's U.S. Coastal Relief Model (CRM) provides the first comprehensive view of the U.S. coastal zone integrating offshore bathymetry with land topography into a...

  5. U.S. Coastal Relief Model - Southeast Atlantic

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — NGDC's U.S. Coastal Relief Model (CRM) provides the first comprehensive view of the U.S. coastal zone integrating offshore bathymetry with land topography into a...

  6. U.S. Coastal Relief Model - Central Gulf of Mexico

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — NGDC's U.S. Coastal Relief Model (CRM) provides the first comprehensive view of the U.S. coastal zone integrating offshore bathymetry with land topography into a...

  7. U.S. Coastal Relief Model - Central Pacific

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — NGDC's U.S. Coastal Relief Model (CRM) provides the first comprehensive view of the U.S. coastal zone integrating offshore bathymetry with land topography into a...

  8. U.S. Coastal Relief Model - Southern California

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — NGDC's U.S. Coastal Relief Model (CRM) provides the first comprehensive view of the U.S. coastal zone integrating offshore bathymetry with land topography into a...

  9. U.S. Coastal Relief Model - Northeast Atlantic

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — NGDC's U.S. Coastal Relief Model (CRM) provides the first comprehensive view of the U.S. coastal zone integrating offshore bathymetry with land topography into a...

  10. U.S. Coastal Relief Model - Puerto Rico

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — NGDC's U.S. Coastal Relief Model (CRM) provides the first comprehensive view of the U.S. coastal zone integrating offshore bathymetry with land topography into a...

  11. U.S. Coastal Relief Model - Southern California Version 2

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — NGDC's U.S. Coastal Relief Model (CRM) provides a comprehensive view of the U.S. coastal zone integrating offshore bathymetry with land topography into a seamless...

  12. Antiemetic Medicines: OTC Relief for Nausea and Vomiting

    Science.gov (United States)

    ... CorrectlyPain Relievers: Understanding Your OTC OptionsAntacids and Acid Reducers: OTC Relief for Heartburn and Acid RefluxOTC Cough ... Loss and Diet Plans Nutrients and Nutritional Info Sugar and Sugar Substitutes Exercise and Fitness Exercise Basics ...

  13. Anti-Seizure Medications: Relief from Nerve Pain

    Science.gov (United States)

    Anti-seizure medications: Relief from nerve pain Anti-seizure drugs often are used to help control the type of ... by damaged nerves. By Mayo Clinic Staff Anti-seizure medications were originally designed to treat people with ...

  14. Engineering and Design. Design, Construction, and Maintenance of Relief Wells

    National Research Council Canada - National Science Library

    1992-01-01

    The objective of this manual is to provide guidance and information on the design, construction, and maintenance of pressure relief wells installed for the purpose of relieving subsurface hydrostatic...

  15. 29 CFR 1601.23 - Preliminary or temporary relief.

    Science.gov (United States)

    2010-07-01

    ..., or political subdivision. (b) In a case involving a government, governmental agency, or political... private individuals from exercising their rights to seek temporary or preliminary relief on their own...

  16. A Preliminary Survey of the Preferred Learning Methods for Interpretation Students

    Science.gov (United States)

    Heinz, Michael

    2013-01-01

    There are many different methods that individuals use to learn languages like reading books or writing essays. Not all methods are equally successful for second language learners but nor do all successful learners of a second language show identical preferences for learning methods. Additionally, at the highest level of language learning various…

  17. Application of the surface azimuthal electrical resistivity survey method to determine patterns of regional joint orientation in glacial tills

    Science.gov (United States)

    Carlson, D.

    2010-01-01

    Joints within unconsolidated material such as glacial till can be primary avenues for the flow of electrical charge, water, and contaminants. To facilitate the siting and design of remediation programs, a need exists to map anisotropic distribution of such pathways within glacial tills by determining the azimuth of the dominant joint set. The azimuthal survey method uses standard resistivity equipment with a Wenner array rotated about a fixed center point at selected degree intervals that yields an apparent resistivity ellipse. From this ellipse, joint set orientation can be determined. Azimuthal surveys were conducted at 21 sites in a 500-km2 (193 mi2) area around Milwaukee, Wisconsin, and more specifically, at sites having more than 30 m (98 ft) of glacial till (to minimize the influence of underlying bedrock joints). The 26 azimuthal surveys revealed a systematic pattern to the trend of the dominant joint set within the tills, which is approximately parallel to ice flow direction during till deposition. The average orientation of the joint set parallel with the ice flow direction is N77??E and N37??E for the Oak Creek and Ozaukee tills, respectively. The mean difference between average direct observation of joint set orientations and average azimuthal resistivity results is 8??, which is one fifth of the difference of ice flow direction between the Ozaukee and Oak Creek tills. The results of this study suggest that the surface azimuthal electrical resistivity survey method used for local in situ studies can be a useful noninvasive method for delineating joint sets within shallow geologic material for regional studies. Copyright ?? 2010 The American Association of Petroleum Geologists/Division of Environmental Geosciences. All rights reserved.

  18. Comparison of two dietary assessment methods by food consumption: results of the German National Nutrition Survey II.

    Science.gov (United States)

    Eisinger-Watzl, Marianne; Straßburg, Andrea; Ramünke, Josa; Krems, Carolin; Heuer, Thorsten; Hoffmann, Ingrid

    2015-04-01

    To further characterise the performance of the diet history method and the 24-h recalls method, both in an updated version, a comparison was conducted. The National Nutrition Survey II, representative for Germany, assessed food consumption with both methods. The comparison was conducted in a sample of 9,968 participants aged 14-80. Besides calculating mean differences, statistical agreement measurements encompass Spearman and intraclass correlation coefficients, ranking participants in quartiles and the Bland-Altman method. Mean consumption of 12 out of 18 food groups was higher assessed with the diet history method. Three of these 12 food groups had a medium to large effect size (e.g., raw vegetables) and seven showed at least a small strength while there was basically no difference for coffee/tea or ice cream. Intraclass correlations were strong only for beverages (>0.50) and revealed the least correlation for vegetables (diet history method to remember consumption of the past 4 weeks may be a source of inaccurateness, especially for inhomogeneous food groups. Additionally, social desirability gains significance. There is no assessment method without errors and attention to specific food groups is a critical issue with every method. Altogether, the 24-h recalls method applied in the presented study, offers advantages approximating food consumption as compared to the diet history method.

  19. Non-invasive nursing technologies for pain relief during childbirth--the Brazilian nurse midwives' view.

    Science.gov (United States)

    Vargens, Octavio M C; Silva, Alexandra C V; Progianti, Jane M

    2013-11-01

    to describe the non-invasive care technologies most frequently used by nurse midwives to relieve childbirth pain, and provide a synthesis of studies published by Brazilian nurse midwives on the use of such technologies. a systematic literature review focusing on the non-invasive pain relief strategies used by nurse midwives in Brazil. Surveys of three databases (BDENF, CINAHL and MEDLINE) were conducted between 2002 and 2012. The inclusion criteria were: (1) full-text article available; (2) published between 2002 and 2012; (3) written by Brazilian nurse midwives, and (4) fitting the descriptors: childbirth pain; non-invasive technologies; labour; and pain relief. For purposes of analysis, the technologies mentioned were classified into four main categories of support as they relate to environment, position, tactile stimulation, and energy level. we located 21 scientific articles that met the inclusion criteria and addressed the non-invasive technologies that nurse midwives use to provide pain relief during labour. The technologies most used was: stimulation of breathing and relaxation; use of massage with essential oils; encouraging freedom to move, to walk and the free choice for vertical positioning; use of showers and baths; use of birth ball. Brazilian nurse midwives have made efforts to focus care during delivery on the parturient. By studying and publishing about the non-invasive care technologies they have strengthened de-medicalised knowledge, based on scientific evidence and good outcomes in pain relief during labour. the study presented ideas towards improved theoretical foundations and strategies for establishing practice consonant with humanised care. Copyright © 2012 Elsevier Ltd. All rights reserved.

  20. The efficacy of online communication platforms for plastic surgeons providing extended disaster relief.

    Science.gov (United States)

    Fan, Kenneth L; Avashia, Yash J; Dayicioglu, Deniz; DeGennaro, Vincent A; Thaller, Seth R

    2014-04-01

    Immediately after the January 2010 earthquake in Haiti, plastic surgeons provided disaster relief services through the University of Miami Miller School of Medicine for 5 months. To improve surgical care and promote awareness of plastic surgery's role in humanitarian assistance, an online communication platform (OCP) was initiated. An OCP is a Web-based application combining Web blogging, picture uploading, news posting, and private messaging systems into a single platform. The purpose of this study was to analyze the use of OCP during disaster relief. Surgeries performed during the period from January 13 to May 28, 2010, were documented. The OCP was established with 4 priorities: ease of use, multimedia integration, organization capabilities, and security. Web traffic was documented. A 17-question survey was administered to 18 plastic surgeons who used the OCP after 1 year to assess their attitudes and perceptions. From January 13 to May 28, 2010, 413 operations were performed at the field hospital. Of the overall number of procedures, 46.9% were performed by plastic surgery teams. In a year, beginning from January 12, 2011, the OCP had 1117 visits with 530 absolute unique visitors. Of 17 plastic surgeons, 71% responded that the OCP improved follow-up and continuity of care by debriefing rotating plastic surgery teams. One hundred percent claimed that the OCP conveyed the role of plastic surgeons with the public. Results demonstrate the necessity of OCP during disaster relief. Online communication platform permitted secure exchange of surgical management details, follow-up, photos, and miscellaneous necessary recommendations. Posted experiences and field hospital progress assisted in generating substantial awareness regarding the significant role and contribution played by plastic surgeons in disaster relief.

  1. Spontaneous formation of optically induced surface relief gratings

    International Nuclear Information System (INIS)

    Leblond, H; Barille, R; Ahmadi-Kandjani, S; Nunzi, J-M; Ortyl, E; Kucharski, S

    2009-01-01

    We develop a model based on Fick's law of diffusion as a phenomenological description of the molecular motion, and on the coupled mode theory, to describe single-beam surface relief grating formation in azopolymer thin films. The model allows us to explain the mechanism of spontaneous patterning, and self-organization. It allows us to compute the surface relief profile and its evolution, with good agreement with experiments.

  2. Spontaneous formation of optically induced surface relief gratings

    Energy Technology Data Exchange (ETDEWEB)

    Leblond, H; Barille, R; Ahmadi-Kandjani, S; Nunzi, J-M [Laboratoire POMA, Universite d' Angers, CNRS FRE 2988, 2, Bd Lavoisier, 49045 Angers (France); Ortyl, E; Kucharski, S, E-mail: herve.leblond@univ-angers.f [Wroclaw University of Technology, Faculty of Chemistry, Department of Polymer Engineering and Technology, 50-370 Wroclaw (Poland)

    2009-10-28

    We develop a model based on Fick's law of diffusion as a phenomenological description of the molecular motion, and on the coupled mode theory, to describe single-beam surface relief grating formation in azopolymer thin films. The model allows us to explain the mechanism of spontaneous patterning, and self-organization. It allows us to compute the surface relief profile and its evolution, with good agreement with experiments.

  3. Healthcare experiences of gender diverse Australians: a mixed-methods, self-report survey.

    Science.gov (United States)

    Riggs, Damien W; Coleman, Katrina; Due, Clemence

    2014-03-06

    To date the healthcare experiences of gender diverse Australians have received little attention. Previous international research indicates a range of both negative and positive healthcare experiences amongst this diverse population, with negative experiences being those most frequently reported. An online survey was designed to examine the healthcare experiences of gender diverse Australians. The survey included Likert scales asking participants to rate their mental and physical health, and their experiences with psychiatrists, general practitioners and surgeons (in terms of perceived comfort, discrimination and information provision). Open-ended questions provided the opportunity for participants to further elaborate on their experiences. Data were collected between June 2012 and July 2013. Quantitative data analysis was conducted utilising SPSS 17.0, including ANCOVAs and correlations to examine the relationships between variables. Qualitative data were coded by the authors in terms of negative or positive responses and the validity of ratings were assessed utilising Cohen's kappa. 110 people assigned male at birth (MAAB) and 78 people assigned female at birth (FAAB) completed two separate surveys. All identified as gender diverse as defined in this paper. 70% of participants had accessed a psychiatrist. Participants MAAB rated their experiences with psychiatrists more highly than participants FAAB. 80% of participants had accessed a general practitioner. Comfort with, and respect from, general practitioners were both positively correlated with mental health, whilst discrimination was negatively correlated with mental health. 42.5% of participants had undertaken sex-affirming surgery. Those who had such surgery reported higher levels of physical and mental health than those who had not undertaken surgery. Participants MAAB reported more positive experiences of surgery than did participants FAAB. Findings highlight the need for increased education of medical

  4. Does health promotion need a Code of Ethics? Results from an IUHPE mixed method survey.

    Science.gov (United States)

    Bull, Torill; Riggs, Elisha; Nchogu, Sussy N

    2012-09-01

    Health promotion is an ethically challenging field involving constant reflection of values across multiple cultures of what is regarded as good and bad health promotion practice. While many disciplines are guided by a Code of Ethics (CoE) no such guide is available to health promoters. The International Union for Health Promotion and Education (IUHPE) has been nominated as a suitable candidate for developing such a code. It is within this context that the IUHPE Student and Early Career Network (ISECN), through its Ethics Working Group, has taken up the challenge of preparing the foundations for a CoE for health promotion. An online survey comprising open and closed-answer questions was used to gather the opinions of IUHPE members regarding the need for a CoE for health promotion. The quantitative data were calculated with descriptive analyses. A thematic analysis approach was used to analyze and interpret the qualitative data. IUHPE members (n = 236) from all global regions responded to the survey. The majority (52%) of the respondents had 11 years' experience or more in the field of health promotion. Ethical dilemmas were commonly encountered. The need for a CoE for health promotion was expressed by 83% of respondents. Respondents also offered their views of possibilities, ideas and challenges regarding the development of a CoE for health promotion. Considering that health promoters encounter ethical dilemmas frequently in their practice, this study reinforces the need to develop a CoE for the field. The recommendations from the survey provide a good basis for future work to develop such a code.

  5. Design and methods in a survey of living conditions in the Arctic - the SLiCA study.

    Science.gov (United States)

    Eliassen, Bent-Martin; Melhus, Marita; Kruse, Jack; Poppel, Birger; Broderstad, Ann Ragnhild

    2012-03-19

    The main objective of this study is to describe the methods and design of the survey of living conditions in the Arctic (SLiCA), relevant participation rates and the distribution of participants, as applicable to the survey data in Alaska, Greenland and Norway. This article briefly addresses possible selection bias in the data and also the ways to tackle it in future studies. Population-based cross-sectional survey. Indigenous individuals aged 16 years and older, living in Greenland, Alaska and in traditional settlement areas in Norway, were invited to participate. Random sampling methods were applied in Alaska and Greenland, while non-probability sampling methods were applied in Norway. Data were collected in 3 periods: in Alaska, from January 2002 to February 2003; in Greenland, from December 2003 to August 2006; and in Norway, in 2003 and from June 2006 to June 2008. The principal method in SLiCA was standardised face-to-face interviews using a questionnaire. A total of 663, 1,197 and 445 individuals were interviewed in Alaska, Greenland and Norway, respectively. Very high overall participation rates of 83% were obtained in Greenland and Alaska, while a more conventional rate of 57% was achieved in Norway. A predominance of female respondents was obtained in Alaska. Overall, the Sami cohort is older than the cohorts from Greenland and Alaska. Preliminary assessments suggest that selection bias in the Sami sample is plausible but not a major threat. Few or no threats to validity are detected in the data from Alaska and Greenland. Despite different sampling and recruitment methods, and sociocultural differences, a unique database has been generated, which shall be used to explore relationships between health and other living conditions variables.

  6. Low cost continuous femoral nerve block for relief of acute severe cancer related pain due to pathological fracture femur

    Directory of Open Access Journals (Sweden)

    Rachel Cherian Koshy

    2010-01-01

    Full Text Available Pathological fractures in cancer patient cause severe pain that is difficult to control pharmacologically. Even with good pain relief at rest, breakthrough and incident pain can be unmanageable. Continuous regional nerve blocks have a definite role in controlling such intractable pain. We describe two such cases where severe pain was adequately relieved in the acute phase. Continuous femoral nerve block was used as an efficient, cheap and safe method of pain relief for two of our patients with pathological fracture femur. This method was proved to be quite efficient in decreasing the fracture-related pain and improving the level of well being.

  7. APPLICATION OF PARAMETER CONTINUATION METHOD FOR INVESTIGATION OF VIBROIMPACT SYSTEMS DYNAMIC BEHAVIOUR. PROBLEM STATE. SHORT SURVEY OF WORLD SCIENTIFIC LITERATURE

    Directory of Open Access Journals (Sweden)

    V.A. Bazhenov

    2014-12-01

    Full Text Available Authors in their works study vibroimpact system dynamic behaviour by numerical parametric continuation technique combined with shooting and Newton-Raphson’s methods. The technique is adapted to two-mass two-degree-of-freedom vibroimpact system under periodic excitation. Impact is simulated by nonlinear contact interaction force based on Hertz’s contact theory. Stability or instability of obtained periodic solutions is determined by monodromy matrix eigenvalues (multipliers based on Floquet’s theory. In the present paper we describe the state of problem of parameter continuation method using for nonlinear tasks solution. Also we give the short survey of numerous contemporary literature in English and Russian about parameter continuation method application for nonlinear problems. This method is applied for vibroimpact problem solving more rarely because of the difficulties connected with repeated impacts.

  8. Routing Corners of Building Structures - by the Method of Vector Addition - Measured with RTN GNSS Surveying Technology

    Science.gov (United States)

    Krzyżek, Robert

    2015-12-01

    The paper deals with the problem of surveying buildings in the RTN GNSS mode using modernized indirect methods of measurement. As a result of the classical realtime measurements using indirect methods (intersection of straight lines or a point on a straight line), we obtain a building structure (a building) which is largely deformed. This distortion is due to the inconsistency of the actual dimensions of the building (tie distances) relative to the obtained measurement results. In order to eliminate these discrepancies, and thus to ensure full consistency of the building geometric structure, an innovative solution was applied - the method of vector addition - to modify the linear values (tie distances) of the external face of the building walls. A separate research problem tackled in the article, although not yet fully solved, is the issue of coordinates of corners of a building obtained after the application of the method of vector addition.

  9. Survey of an evaluation method for research and development projects; Kenkyu kaihatsu project no hyoka shuho ni kansuru chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    This report describes an interim evaluation method and a concrete evaluation method for projects promoted by the Agency of Industrial Science and Technology, and NEDO. As a result of the survey, a method of highly practical interim evaluation, concrete evaluation items, and evaluation criteria have been proposed by assuming that the projects are evaluated by the project evaluation department independent of the project promotion department. Long-term issues for constructing the evaluation system are also described. It is the most essential for the evaluation to fulfill the function of effective promotion of the following projects. It is also indispensable for the evaluation method and issues proposed in this report to communicate closely to project promoters and researchers, and to reassess the projects continuously. Continuous consideration for the feedback of evaluation process and the improvement of evaluation are significant for the long-term construction of system. 21 refs., 9 figs., 23 tabs.

  10. SURVEY METHODS FOR EARTHQUAKE DAMAGES IN THE "CAMERA DEGLI SPOSI" OF MANTEGNA (MANTOVA

    Directory of Open Access Journals (Sweden)

    E. Fratus de Balestrini

    2013-07-01

    Full Text Available Cultural Heritage constitutes a fundamental resource for all Countries, even in economic terms, as it can be considered an extraordinary tourist attraction. This is particularly true for Italy, which is one of the Countries with the richest artistic heritage in the world. For this reason, restoration becomes an essential step towards the conservation and therefore valorisation of architecture. In this context, this paper focuses on one of the first stages that allow us to reach a complete knowledge of a building. Because of the earthquake of May 2012, the Castle of San Giorgio in Mantova (Italy presented a series of structural damages. On the occasion of its upcoming re-opening to the public, the Soprintendenza per i Beni Architettonici e Paesaggistici per le province di Brescia, Cremona e Mantova has requested an analysis and evaluation of the damages for the development of an intervention project. In particular, a special attention was given to the "Camera degli Sposi" ("Bridal Chamber", also known as the Camera picta ("painted chamber". It is a frescoed room, with illusionistic paintings by Andrea Mantegna, located in the northeast tower of the Castle. It was painted between 1465 and 1474 and commissioned by Ludovico Gonzaga, and it is well-known for the use of trompe l'oeil details and for the decoration of its ceiling. The seismic shakes damaged the wall decorated with the "Scena della Corte" ("Court Scene", above the chimney, re-opening an old crack that had to be analysed, in order to understand whether the damage was structural or just superficial. The diagnostic analyses constitute a fundamental prerequisite for the elaboration of any kind of intervention or restoration in any architectural, artistic or archaeological framework. To obtain a description of the conservation state of the Camera, non-invasive integrated survey techniques were applied. The purpose of the study presented here is the definition of a methodology able to support

  11. Survey nonresponse among ethnic minorities in a national health survey--a mixed-method study of participation, barriers, and potentials.

    Science.gov (United States)

    Ahlmark, Nanna; Algren, Maria Holst; Holmberg, Teresa; Norredam, Marie Louise; Nielsen, Signe Smith; Blom, Astrid Benedikte; Bo, Anne; Juel, Knud

    2015-01-01

    The participation rate in the Danish National Health Survey (DNHS) 2010 was significantly lower among ethnic minorities than ethnic Danes. The purpose was to characterize nonresponse among ethnic minorities in DNHS, analyze variations in item nonresponse, and investigate barriers and incentives to participation. This was a mixed-method study. Logistic regression was used to analyze nonresponse using data from DNHS (N = 177,639 and chi-square tests in item nonresponse analyses. We explored barriers and incentives regarding participation through focus groups and cognitive interviews. Informants included immigrants and their descendants of both sexes, with and without higher education. The highest nonresponse rate was for non-Western descendants (80.0%) and immigrants 25 (72.3%) with basic education. Immigrants and descendants had higher odds ratios (OR = 3.07 and OR = 3.35, respectively) for nonresponse than ethnic Danes when adjusted for sex, age, marital status, and education. Non-Western immigrants had higher item nonresponse in several question categories. Barriers to non-participation related to the content, language, format, and layout of both the questionnaire and the cover letter. The sender and setting in which to receive the questionnaire also influenced answering incentives. We observed differences in barriers and incentives between immigrants and descendants. Nonresponse appears related to linguistic and/or educational limitations, to alienation generated by the questions' focus on disease and cultural assumptions, or mistrust regarding anonymity. Ethnic minorities seem particularly affected by such barriers. To increase survey participation, questions could be sensitized to reflect multicultural traditions, and the impact of sender and setting considered.

  12. Historical essay: An Arabic surgeon, Ibn al Quff's (1232–1286) account on surgical pain relief

    OpenAIRE

    Takrouri, Mohamad Said Maani

    2010-01-01

    This is a review of Ibn al Quff's account of surgical pain relief in his surgical book Al Omdah, in which he mentioned the word anesthetic (Al moukhadder) and the involvement of physician (al tabbaaee) to give mixture of drugs to prevent pain in a surgical condition to relieve the patient from pain or to make surgical management possible. Hich indicated one rare occasion to such description in Arabic medical texts. Methods of administration of these drugs were inhalation, ingestion and by rec...

  13. Main steam system piping response under safety/relief valve opening events

    International Nuclear Information System (INIS)

    Swain, E.O.; Esswein, G.A.; Hwang, H.L.; Nieh, C.T.

    1980-01-01

    The stresses in the main steam branch pipe of a Boiling Water Reactor due to safety/relief valve blowdown has been measured from an in situ piping system test. The test results were compared with analytical results. The predicted stresses using the current state of art analytical methods used for BWR SRV discharge transient piping response loads were found to be conservative when compared to the measured stress values. 3 refs

  14. Integrated Safety and Security Risk Assessment Methods: A Survey of Key Characteristics and Applications

    OpenAIRE

    Chockalingam, Sabarathinam; Hadziosmanovic, Dina; Pieters, Wolter; Teixeira, Andre; van Gelder, Pieter

    2017-01-01

    Over the last years, we have seen several security incidents that compromised system safety, of which some caused physical harm to people. Meanwhile, various risk assessment methods have been developed that integrate safety and security, and these could help to address the corresponding threats by implementing suitable risk treatment plans. However, an overarching overview of these methods, systematizing the characteristics of such methods, is missing. In this paper, we conduct a systematic l...

  15. An exploratory survey of methods used to develop measures of performance

    Science.gov (United States)

    Hamner, Kenneth L.; Lafleur, Charles A.

    1993-09-01

    Nonmanufacturing organizations are being challenged to provide high-quality products and services to their customers, with an emphasis on continuous process improvement. Measures of performance, referred to as metrics, can be used to foster process improvement. The application of performance measurement to nonmanufacturing processes can be very difficult. This research explored methods used to develop metrics in nonmanufacturing organizations. Several methods were formally defined in the literature, and the researchers used a two-step screening process to determine the OMB Generic Method was most likely to produce high-quality metrics. The OMB Generic Method was then used to develop metrics. A few other metric development methods were found in use at nonmanufacturing organizations. The researchers interviewed participants in metric development efforts to determine their satisfaction and to have them identify the strengths and weaknesses of, and recommended improvements to, the metric development methods used. Analysis of participants' responses allowed the researchers to identify the key components of a sound metrics development method. Those components were incorporated into a proposed metric development method that was based on the OMB Generic Method, and should be more likely to produce high-quality metrics that will result in continuous process improvement.

  16. Comparative Survey of Ultrasound Images Compression Methods Dedicated to a Tele-Echography Robotic System

    National Research Council Canada - National Science Library

    Delgorge, C

    2001-01-01

    .... For the purpose of this work, we selected seven compression methods : Fourier Transform, Discrete Cosine Transform, Wavelets, Quadtrees Transform, Fractals, Histogram Thresholding, and Run Length Coding...

  17. Temperature effect on the formation of a relief of diamond-like carbon coatings and its modification by ion bombardment

    International Nuclear Information System (INIS)

    Rubshtein, A.P.; Trakhtenberg, I.Sh.; Yugov, V.A.; Vladimirov, A.B.; Plotnikov, S.A.; Ponosov, Yu.S

    2006-01-01

    Using the method of pulsed arc sputtering of a graphite target the diamond-like coatings (DLC) ∼1.5 μm thick are deposited on a steel R6M5 substrate. The relief of the coatings obtained under various temperature conditions is investigated. Variations of carbon DLC surfaces are followed after their bombardment with accelerated argon or chemically active oxygen ions. Argon ion bombardment is established to be preferred for producing a smoothed-out DLC relief. It is shown that a DLC relief should be taken into account when measuring microhardness. It is recommended that transformation of interatomic bonds in irradiated subsurface layers be taken into consideration if information index of methods applied constitutes several monolayers [ru

  18. FY 2000 report on the survey for introduction of the hot spring effect prediction method in the geothermal development promotion survey. Improvement of the hot spring effect prediction method in the geothermal development promotion survey; 2000 nendo chinetsu kaihatsu sokushin chosa. Onsen eikyo yosoku shuho donyu chosa - Chinetsu kaihatsu sokushin chosa ni okeru onsen eikyo yosoku shuho no kairyo hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    Supposing the case where the geothermal development promotion survey was carried out in promising geothermal areas in Japan, investigational study was conducted on possibilities of introducing the hot spring effect prediction method, improvement of the method, etc. In the survey, adjustment/classification of formation mechanisms of hot spring were made. For each of the formation mechanisms, the mechanisms in case of the geothermal development having effects were studied/summarized. As to how effects are brought about, presumed were the lowering of water level and decrease in discharge amount in accordance with the decreasing pressure and the dilution by increase in mixture of the ground water around the area. Also cited were the vaporization of hot spring aquifers by the increasing rate of vapor inflow, etc. For the introduction of the hot spring effect prediction method to the geothermal development promotion survey, the problem is short supply of various data, and the examination for it was made. Based on the results of the survey, items to be studied in case of introducing the hot spring effect prediction method were selected. Further, the hot spring effect prediction flow in case of introducing surface survey and well survey was made out. (NEDO)

  19. Distribution of gamma-ray dose rate in Fukushima prefecture by a car-borne survey method

    International Nuclear Information System (INIS)

    Sugihara, Shinji; Momoshima, Noriyuki; Maekawa, Akihiro; Ichikawa, Ryohei; Kawamura, Hidehisa

    2013-01-01

    The Tohoku Pacific Earthquake and Tsunami on March 11, 2011, caused severe damage to the TEPCO Fukushima Dai-ichi NPP. This was followed by a nuclear accident at an unprecedented scale, and huge amounts of radioactive material were released into the environment. The distributions of the gamma-ray dose rate in Fukushima prefecture were measured using a NaI(Tl) scintillation survey meter as part of a car-borne survey method on April 18-21, June 20-22, October 18-21, 2011, and on April 9-11 and July 30 - August 1, 2012. The dose rate near TEPCO Fukushima Dai-ichi NPP and at Iitate-mura, Fukushima-city was high (1 to >30 μSv/h). (author)

  20. Guiana Highlands, Shaded Relief and Colored Height

    Science.gov (United States)

    2003-01-01

    [figure removed for brevity, see original site] These two images show exactly the same area in South America, the Guiana Highlands straddling the borders of Venezuela, Guyana and Brazil. The image on the left was created using the best global topographic data set previously available, the U.S. Geological Survey's GTOPO30. In contrast, the image on the right was generated with a new data set recently released by the Shuttle Radar Topography Mission (SRTM) called SRTM30, which represents a significant improvement in our knowledge of the topography of much of the world.GTOPO30, with a resolution of about 928 meters (1496 feet), was developed over a three-year period and published in 1996, and since then has been the primary source of digital elevation data for scientists and analysts involved in global studies. However, since it was compiled from a number of different map sources with varying attributes, the data for some parts of the globe were inconsistent or of low quality.The SRTM data, on the other hand, were collected within a ten-day period using the same instrument in a uniform fashion, and were processed into elevation data using consistent processing techniques. Thus SRTM30 provides a new resource of uniform quality for all parts of the Earth, and since the data, which have an intrinsic resolution of about 30 meters, were averaged and resampled to match the GTOPO30 sample spacing and format, and can be used by the same computer software without modification.The Guiana Highlands are part of the Guyana Shield, which lies in northeast South America and represent one of the oldest land surfaces in the world. Chemical weathering over many millions of years has created a landscape of flat-topped table mountains with dramatic, steep cliffs with a large number of spectacular waterfalls. For example Angel Falls, at 979 meters the highest waterfall in the world, plunges from Auyan Tebuy, part of a mesa of the type that may have been the inspiration for Arthur Conan