WorldWideScience

Sample records for reliably daghstuhl mining

  1. Citation-related reliability analysis for a pilot sample of underground coal mines

    Energy Technology Data Exchange (ETDEWEB)

    Kinilakodi, H.; Grayson, R.L. [Penn State University, University Park, PA (United States)

    2011-05-15

    The scrutiny of underground coal mine safety was heightened because of the disasters that occurred in 2006-2007, and more recently in 2010. In the aftermath of the 2006 incidents, the U.S. Congress passed the Mine Improvement and New Emergency Response Act of 2006 (MINER Act), which strengthened the existing regulations and mandated new laws to address various issues related to emergency preparedness and response, escape from an emergency situation, and protection of miners. The National Mining Association-sponsored Mine Safety Technology and Training Commission study highlighted the role of risk management in identifying and controlling major hazards, which are elements that could come together and cause a mine disaster. In 2007 MSHA revised its approach to the 'Pattern of Violations' (POV) process in order to target unsafe mines and then force them to remediate conditions in their mines. The POV approach has certain limitations that make it difficult for it to be enforced. One very understandable way to focus on removing threats from major-hazard conditions is to use citation-related reliability analysis. The citation reliability approach, which focuses on the probability of not getting a citation on a given inspector day, is considered an analogue to the maintenance reliability approach, which many mine operators understand and use. In this study, the citation reliability approach was applied to a stratified random sample of 31 underground coal mines to examine its potential for broader application. The results clearly show the best-performing and worst-performing mines for compliance with mine safety standards, and they highlight differences among different mine sizes.

  2. Reliability analysis of mining equipment: A case study of a crushing plant at Jajarm Bauxite Mine in Iran

    International Nuclear Information System (INIS)

    Barabady, Javad; Kumar, Uday

    2008-01-01

    The performance of mining machines depends on the reliability of the equipment used, the operating environment, the maintenance efficiency, the operation process, the technical expertise of the miners, etc. As the size and complexity of mining equipments continue to increase, the implications of equipment failure become ever more critical. Therefore, reliability analysis is required to identify the bottlenecks in the system and to find the components or subsystems with low reliability for a given designed performance. It is important to select a suitable method for data collection as well as for reliability analysis. This paper presents a case study describing reliability and availability analysis of the crushing plant number 3 at Jajarm Bauxite Mine in Iran. In this study, the crushing plant number 3 is divided into six subsystems. The parameters of some probability distributions, such as Weibull, Exponential, and Lognormal distributions have been estimated by using ReliaSoft's Weibull++6 software. The results of the analysis show that the conveyer subsystem and secondary screen subsystem are critical from a reliability point of view, and the secondary crusher subsystem and conveyer subsystem are critical from an availability point of view. The study also shows that the reliability analysis is very useful for deciding maintenance intervals

  3. Failure rate and reliability of the KOMATSU hydraulic excavator in surface limestone mine

    Science.gov (United States)

    Harish Kumar N., S.; Choudhary, R. P.; Murthy, Ch. S. N.

    2018-04-01

    The model with failure rate function of bathtub-shaped is helpful in reliability analysis of any system and particularly in reliability associated privative maintenance. The usual Weibull distribution is, however, not capable to model the complete lifecycle of the any with a bathtub-shaped failure rate function. In this paper, failure rate and reliability analysis of the KOMATSU hydraulic excavator/shovel in surface mine is presented and also to improve the reliability and decrease the failure rate of each subsystem of the shovel based on the preventive maintenance. The model of the bathtub-shaped for shovel can also be seen as a simplification of the Weibull distribution.

  4. Reliable cost effective technique for in situ ground stress measurements in deep gold mines.

    CSIR Research Space (South Africa)

    Stacey, TR

    1995-07-01

    Full Text Available on these requirements, an in situ stress measurement technique which will be practically applicable in the deep gold mines, has been developed conceptually. Referring to the figure on the following page, this method involves: • a borehole-based system, using... level mines have not been developed. 2 This is some of the background to the present SIMRAC research project, the title ofwhich is “Reliable cost effective technique for in-situ ground stress measurements in deep gold mines”. A copy of the research...

  5. Data mining-based coefficient of influence factors optimization of test paper reliability

    Science.gov (United States)

    Xu, Peiyao; Jiang, Huiping; Wei, Jieyao

    2018-05-01

    Test is a significant part of the teaching process. It demonstrates the final outcome of school teaching through teachers' teaching level and students' scores. The analysis of test paper is a complex operation that has the characteristics of non-linear relation in the length of the paper, time duration and the degree of difficulty. It is therefore difficult to optimize the coefficient of influence factors under different conditions in order to get text papers with clearly higher reliability with general methods [1]. With data mining techniques like Support Vector Regression (SVR) and Genetic Algorithm (GA), we can model the test paper analysis and optimize the coefficient of impact factors for higher reliability. It's easy to find that the combination of SVR and GA can get an effective advance in reliability from the test results. The optimal coefficient of influence factors optimization has a practicability in actual application, and the whole optimizing operation can offer model basis for test paper analysis.

  6. Problems and solutions of reliability issues for external power supply in the coal mines

    Directory of Open Access Journals (Sweden)

    И. Ю. Семыкина

    2017-08-01

    Full Text Available Restructuring of the energy sector  and liberalization of the electricity market resulted in separation of a single industry into a multitude of generating companies, federal and interregional distribution utilities, regional power providers and energy suppliers. For a number of reasons, related to the process of managing separate companies, faults in the laws and regulations, and unsatisfactory technical state of the energy equipment both on the part of distributors and consumers, reliability of energy supply faces increasing negative trends, which potentially can lead to big problems. Up to this day the energy sector does not have a developed database on the state of equipment and results of its maintenance, nor has it defined criteria to actually assess technical conditions of the equipment. The authors propose to develop and implement a mechanism aimed at technical auditing and monitoring of the engineering state of external power supply system, whose results can help in the development of more efficient and economically sound measures to improve reliability of energy supply. In recent years, a lot of attention has been paid to the issues of enhanced security of industrial power supply. However, specific characteristics of underground coal mining and enormous work load of the production process limit the applicability of developed methods and algorithms. Existing research does not address economic issues of reliable energy supply, either direct (economic damage from power interruptions, contractual security of supply, tariff regulation or indirect (charges for utility connection with a required level of reliability. There is no explicit definition for the term «autonomous energy source», nor is there a list of power receivers falling into the first and «special» categories according to their reliability. The paper contains a range of urgent problems and solutions that will increase reliability of external power supply in the coal mines.

  7. Factors influencing the reliability of non-electric detonating circuit in underground uranium mines and preventive measures of misfiring

    International Nuclear Information System (INIS)

    Li Qin

    2010-01-01

    Characteristics of non-electric detonating circuit are introduced. The main factors influencing the reliability of non-electric detonating circuit are described. Taking an underground blasting of a uranium mine for example, the reliability of various kinds of detonating network system is calculated using the reliability theory and numerical analysis method. The reasons that cause the misfiring in non-electric detonating circuit system are analyzed, and preventive measures are put forward.(authors)

  8. Low-Power and Reliable Communications for UWB-Based Wireless Monitoring Sensor Networks in Underground Mine Tunnels

    OpenAIRE

    Abou El-Nasr, Mohamad; Shaban, Heba

    2015-01-01

    This paper investigates the bit-error-rate (BER) and maximum allowable data throughput (MADTh) performance of a novel low-power mismatched Rake receiver structure for ultra wideband (UWB) wireless monitoring sensor networks in underground mine tunnels. This receive node structure provides a promising solution for low-power and reliable communications in underground mine tunnels with more than 90% reduction in power consumption. The BER and MADTh of the proposed receive nodes are investigated ...

  9. Protecting reliability of mining at individual levels against phase conflict at the Belchatow mine and power plant

    Energy Technology Data Exchange (ETDEWEB)

    Sztandera, T [Akademia Gorniczo-Hutnicza, Cracow (Poland)

    1988-01-01

    Discusses problems of overburden removal and mining at the Belchatow brown coal surface mine in Poland. The analysis is based on the results of the statistical data on surface mining in Belchatow from 1985 to 1987. Information on number of benches, their dimensions (height, width), slope inclination and volume of overburden is evaluated. The analysis showed that time delay from overburden removal to coal mining is excessively low; reserves of coal ready for mining are too low, especially in winter. This phenomenon is illustrated by the increasing slope inclinations of the whole cut in winter as the mine yields coal reserves made ready for excavation. In summer the rate of overburden removal increases. Such seasonal fluctuations negatively affect safety conditions in winter and especially in spring when increased content of moisture in sedimentary rocks reduce their resistance to landslide. 5 refs.

  10. Mining protein interactomes to improve their reliability and support the advancement of network medicine

    KAUST Repository

    Alanis Lobato, Gregorio

    2015-09-23

    High-throughput detection of protein interactions has had a major impact in our understanding of the intricate molecular machinery underlying the living cell, and has permitted the construction of very large protein interactomes. The protein networks that are currently available are incomplete and a significant percentage of their interactions are false positives. Fortunately, the structural properties observed in good quality social or technological networks are also present in biological systems. This has encouraged the development of tools, to improve the reliability of protein networks and predict new interactions based merely on the topological characteristics of their components. Since diseases are rarely caused by the malfunction of a single protein, having a more complete and reliable interactome is crucial in order to identify groups of inter-related proteins involved in disease etiology. These system components can then be targeted with minimal collateral damage. In this article, an important number of network mining tools is reviewed, together with resources from which reliable protein interactomes can be constructed. In addition to the review, a few representative examples of how molecular and clinical data can be integrated to deepen our understanding of pathogenesis are discussed.

  11. Mining protein interactomes to improve their reliability and support the advancement of network medicine

    Directory of Open Access Journals (Sweden)

    Gregorio eAlanis-Lobato

    2015-09-01

    Full Text Available High-throughput detection of protein interactions has had a major impact in our understanding of the intricate molecular machinery underlying the living cell, and has permitted the construction of very large protein interactomes. The protein networks that are currently available are incomplete and a significant percentage of their interactions are false positives. Fortunately, the structural properties observed in good quality social or technological networks are also present in biological systems. This has encouraged the development of tools, to improve the reliability of protein networks and predict new interactions based merely on the topological characteristics of their components. Since diseases are rarely caused by the malfunction of a single protein, having a more complete and reliable interactome is crucial in order to identify groups of inter-related proteins involved in disease aetiology. These system components can then be targeted with minimal collateral damage. In this article, an important number of network mining tools is reviewed, together with resources from which reliable protein interactomes can be constructed. In addition to the review, a few representative examples of how molecular and clinical data can be integrated to deepen our understanding of pathogenesis are discussed.

  12. Study on the reliability of the underground conveyor belt system installed at Vulcan Mine, the Jiu Valley Basin in Romania

    Directory of Open Access Journals (Sweden)

    Tomuș Ovidiu-Bogdan

    2017-01-01

    Full Text Available The paper deals with a comprehensive reliability analysis of the conveyor belts belonging to an underground coal mine in the Jiu Valley, Romania. As resulted from the mine management reports, the transportation system is responsible for many downtimes and is a real bottleneck in the constant and adequate production, and the suspicion is the weak state of belt conveyers, which are the spinal column of the extraction process. For this reason, a comprehensive reliability analysis has been decided, in order to deliver a maintenance-upgrading plan.

  13. Reliability

    OpenAIRE

    Condon, David; Revelle, William

    2017-01-01

    Separating the signal in a test from the irrelevant noise is a challenge for all measurement. Low test reliability limits test validity, attenuates important relationships, and can lead to regression artifacts. Multiple approaches to the assessment and improvement of reliability are discussed. The advantages and disadvantages of several different approaches to reliability are considered. Practical advice on how to assess reliability using open source software is provided.

  14. Reliable practical technique for in-situ rock stress measurements in deep gold mines.

    CSIR Research Space (South Africa)

    Stacey, TR

    1998-03-01

    Full Text Available The proposed primary output of this research project is the development of a set of equipment and method of in situ stress measurements in a high stress environment typical of the deep level gold mines....

  15. A Tutorial on Nonlinear Time-Series Data Mining in Engineering Asset Health and Reliability Prediction: Concepts, Models, and Algorithms

    Directory of Open Access Journals (Sweden)

    Ming Dong

    2010-01-01

    Full Text Available The primary objective of engineering asset management is to optimize assets service delivery potential and to minimize the related risks and costs over their entire life through the development and application of asset health and usage management in which the health and reliability prediction plays an important role. In real-life situations where an engineering asset operates under dynamic operational and environmental conditions, the lifetime of an engineering asset is generally described as monitored nonlinear time-series data and subject to high levels of uncertainty and unpredictability. It has been proved that application of data mining techniques is very useful for extracting relevant features which can be used as parameters for assets diagnosis and prognosis. In this paper, a tutorial on nonlinear time-series data mining in engineering asset health and reliability prediction is given. Besides that an overview on health and reliability prediction techniques for engineering assets is covered, this tutorial will focus on concepts, models, algorithms, and applications of hidden Markov models (HMMs and hidden semi-Markov models (HSMMs in engineering asset health prognosis, which are representatives of recent engineering asset health prediction techniques.

  16. Mining

    Directory of Open Access Journals (Sweden)

    Khairullah Khan

    2014-09-01

    Full Text Available Opinion mining is an interesting area of research because of its applications in various fields. Collecting opinions of people about products and about social and political events and problems through the Web is becoming increasingly popular every day. The opinions of users are helpful for the public and for stakeholders when making certain decisions. Opinion mining is a way to retrieve information through search engines, Web blogs and social networks. Because of the huge number of reviews in the form of unstructured text, it is impossible to summarize the information manually. Accordingly, efficient computational methods are needed for mining and summarizing the reviews from corpuses and Web documents. This study presents a systematic literature survey regarding the computational techniques, models and algorithms for mining opinion components from unstructured reviews.

  17. Compatibility between Text Mining and Qualitative Research in the Perspectives of Grounded Theory, Content Analysis, and Reliability

    Science.gov (United States)

    Yu, Chong Ho; Jannasch-Pennell, Angel; DiGangi, Samuel

    2011-01-01

    The objective of this article is to illustrate that text mining and qualitative research are epistemologically compatible. First, like many qualitative research approaches, such as grounded theory, text mining encourages open-mindedness and discourages preconceptions. Contrary to the popular belief that text mining is a linear and fully automated…

  18. reliability reliability

    African Journals Online (AJOL)

    eobe

    Corresponding author, Tel: +234-703. RELIABILITY .... V , , given by the code of practice. However, checks must .... an optimization procedure over the failure domain F corresponding .... of Concrete Members based on Utility Theory,. Technical ...

  19. ASSESSMENT OF RELIABILITY AND RISK DEGREE FOR ACCIDENT INITIATION AT SLIME STORAGES OF 4th MINING ADMINISTRATION, JSC “BELARUSKALI”

    Directory of Open Access Journals (Sweden)

    P. M. Bohaslauchyk

    2016-01-01

    Full Text Available Definition of reliability for dams of slime storage embankment is given on the basis of reliability theory and characteristics of reliability and their analysis are presented in the paper. The paper specifies qualitative indices for earth dams which are subdivided in two groups: applicability factors and structural reliability factors. A short analysis of all possible causes for accident initiation at earth dams has been made and the analysis has permitted to pinpoint eleven main objects for diagnosis for slime storage dams. In order to assess risk degree of accident initiation at JSC “Belaruskali” slime storages all possible causes of emergency cases and their probability of occurrence have been analyzed in the paper. The paper acknowledges the fact that dam malfunction is possible, as a rule, due to violation of operational rules and regulations. Main parameters of slime storage state which are to be controlled regularly in the process of its operation have been noted in the paper. Observation results over slime storages, calculations of dam slope stability for normal operation (a principal calculation case and operating irregularities in water seals (a special calculation case. As a stability margin factor is close to 1.0 for a special calculation case, an extreme position of depression curve has been determined for all design sections. It has been recommended to carry out a constant control over its position, and in the case when it reaches its peak value it is necessary to undertake appropriate measures in order to reduce its value. Final expert estimations on probability of accident initiation at the investigated slime storage dams of the 4th Mining Administration, JSC “Belaruskali” have been prepared on the basis of the analysis comprising all the required factors. A conclusion has been made about low risk degree of their destruction.

  20. Reliability Analysis of Drilling Operation in Open Pit Mines / Analiza niezawodności urządzeń wiertniczych wykorzystywanych w kopalniach odkrywkowych

    Science.gov (United States)

    Rahimdel, M. J.; Ataei, M.; Kakaei, R.; Hoseinie, S. H.

    2013-06-01

    Considering the high investment and operation costs, reliability analysis of mining machineries is essential to achieve a lean operation and to prevent the unwanted stoppages. In open pit mining, drilling, as the initial stage of the exploitation operations, has a significant role in the other stages. Failure of drilling machines causes total delay in blasting operation. In this paper, the reliability of drilling operation has been analyzed using the Markov method. The failure and operation data of four heavy rotary drilling machines in Sarcheshme copper mine in Iran have been used as a case study. Failure rate and repair rate of all machines have been calculated using available data. Then, 16 possible operation states have been defined and the probability of being of drilling fleet in each of the states was calculated using Markov theory. The results showed that there was 77.2% probability that all machines in fleet were in operational condition. It means that, considering 360 working days per year, drilling operation will be in a reliable condition in 277.92 days. Biorąc pod uwagę wysokość kosztów inwestycyjnych a także eksploatacyjnych, przeprowadzenie analizy niezawodności maszyn i urządzeń górniczych jest sprawą kluczową dla zapewnienia sprawnego działania i dla wyeliminowania niepożądanych przestojów. W kopalniach odkrywkowych prace wiertnicze prowadzone w początkowych etapach eksploatacji mają ogromne znaczenie również w późniejszych fazach działalności przedsięwzięcia. Awaria urządzeń wiertniczych powoduje opóźnienia przy pracach strzałowych. W pracy tej przeanalizowano niezawodność urządzeń wiertniczych w oparciu o metodę Markowa. Jako studium przypadku wykorzystano dane zebrane w trakcie eksploatacji i awarii czterech obrotowych urządzeń wiertniczych wykorzystywanych w kopalni rud miedzi Sarcheshme w Iranie. Awaryjność maszyn i zakres oraz częstość napraw obliczono na podstawie dostępnych danych. Zdefiniowano 16

  1. Technological highwall mining

    Energy Technology Data Exchange (ETDEWEB)

    Davison, I. [Highwall Systems (United States)

    2006-09-15

    The paper explores the issues facing highwall mining. Based in Chilhowie, Virginia, American Highwall Systems has developed a highwall mining system that will allow the mining of coal seams from 26 in to 10 ft in thickness. The first production model, AH51, began mining in August 2006. Technologies incorporated into the company's mining machines to improve the performance, enhance the efficiency, and improve the reliability of the highwall mining equipment incorporate technologies from many disciplines. Technology as applied to design engineering, manufacturing and fabrication engineering, control and monitoring computer hardware and software has played an important role in the evolution of the American Highwall Systems design concept. 5 photos.

  2. Improving safety in mining

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2007-08-15

    AcuMine is a spin-out company from CRC Mining Australia and the University of Sydney's Australian Centre for Field Robotics (ACFR). Its focus is to provide safety and fatigue management in mining environments. The AcuLine Haul Check system was its first development. Of greater benefit to safety in mines will be the AcuMine Proximity System (APPS) developed to reliably detect and warn drivers when in proximity to other trucks and utility vehicles and to detect personnel near to those heavy vehicles. 6 figs.

  3. Mining a database of single amplified genomes from Red Sea brine pool extremophiles-improving reliability of gene function prediction using a profile and pattern matching algorithm (PPMA).

    KAUST Repository

    Grö tzinger, Stefan W.; Alam, Intikhab; Ba Alawi, Wail; Bajic, Vladimir B.; Stingl, Ulrich; Eppinger, Jö rg

    2014-01-01

    Reliable functional annotation of genomic data is the key-step in the discovery of novel enzymes. Intrinsic sequencing data quality problems of single amplified genomes (SAGs) and poor homology of novel extremophile's genomes pose significant

  4. Reliability engineering

    International Nuclear Information System (INIS)

    Lee, Chi Woo; Kim, Sun Jin; Lee, Seung Woo; Jeong, Sang Yeong

    1993-08-01

    This book start what is reliability? such as origin of reliability problems, definition of reliability and reliability and use of reliability. It also deals with probability and calculation of reliability, reliability function and failure rate, probability distribution of reliability, assumption of MTBF, process of probability distribution, down time, maintainability and availability, break down maintenance and preventive maintenance design of reliability, design of reliability for prediction and statistics, reliability test, reliability data and design and management of reliability.

  5. Trust Mines

    Science.gov (United States)

    The United States and the Navajo Nation entered into settlement agreements that provide funds to conduct investigations and any needed cleanup at 16 of the 46 priority mines, including six mines in the Northern Abandoned Uranium Mine Region.

  6. Mining a database of single amplified genomes from Red Sea brine pool extremophiles—improving reliability of gene function prediction using a profile and pattern matching algorithm (PPMA)

    Science.gov (United States)

    Grötzinger, Stefan W.; Alam, Intikhab; Ba Alawi, Wail; Bajic, Vladimir B.; Stingl, Ulrich; Eppinger, Jörg

    2014-01-01

    Reliable functional annotation of genomic data is the key-step in the discovery of novel enzymes. Intrinsic sequencing data quality problems of single amplified genomes (SAGs) and poor homology of novel extremophile's genomes pose significant challenges for the attribution of functions to the coding sequences identified. The anoxic deep-sea brine pools of the Red Sea are a promising source of novel enzymes with unique evolutionary adaptation. Sequencing data from Red Sea brine pool cultures and SAGs are annotated and stored in the Integrated Data Warehouse of Microbial Genomes (INDIGO) data warehouse. Low sequence homology of annotated genes (no similarity for 35% of these genes) may translate into false positives when searching for specific functions. The Profile and Pattern Matching (PPM) strategy described here was developed to eliminate false positive annotations of enzyme function before progressing to labor-intensive hyper-saline gene expression and characterization. It utilizes InterPro-derived Gene Ontology (GO)-terms (which represent enzyme function profiles) and annotated relevant PROSITE IDs (which are linked to an amino acid consensus pattern). The PPM algorithm was tested on 15 protein families, which were selected based on scientific and commercial potential. An initial list of 2577 enzyme commission (E.C.) numbers was translated into 171 GO-terms and 49 consensus patterns. A subset of INDIGO-sequences consisting of 58 SAGs from six different taxons of bacteria and archaea were selected from six different brine pool environments. Those SAGs code for 74,516 genes, which were independently scanned for the GO-terms (profile filter) and PROSITE IDs (pattern filter). Following stringent reliability filtering, the non-redundant hits (106 profile hits and 147 pattern hits) are classified as reliable, if at least two relevant descriptors (GO-terms and/or consensus patterns) are present. Scripts for annotation, as well as for the PPM algorithm, are available

  7. Mining a database of single amplified genomes from Red Sea brine pool extremophiles – Improving reliability of gene function prediction using a profile and pattern matching algorithm (PPMA

    Directory of Open Access Journals (Sweden)

    Stefan Wolfgang Grötzinger

    2014-04-01

    Full Text Available Reliable functional annotation of genomic data is the key-step in the discovery of novel enzymes. Intrinsic sequencing data quality problems of single amplified genomes (SAGs and poor homology of novel extremophile’s genomes pose significant challenges for the attribution of functions to the coding sequences identified. The anoxic deep-sea brine pools of the Red Sea are a promising source of novel enzymes with unique evolutionary adaptation. Sequencing data from Red Sea brine pool cultures and SAGs are annotated and stored in the INDIGO data warehouse. Low sequence homology of annotated genes (no similarity for 35% of these genes may translate into false positives when searching for specific functions. The Profile & Pattern Matching (PPM strategy described here was developed to eliminate false positive annotations of enzyme function before progressing to labor-intensive hyper-saline gene expression and characterization. It utilizes InterPro-derived Gene Ontology (GO-terms (which represent enzyme function profiles and annotated relevant PROSITE IDs (which are linked to an amino acid consensus pattern. The PPM algorithm was tested on 15 protein families, which were selected based on scientific and commercial potential. An initial list of 2,577 E.C. numbers was translated into 171 GO-terms and 49 consensus patterns. A subset of INDIGO-sequences consisting of 58 SAGs from six different taxons of bacteria and archaea were selected from 6 different brine pool environments. Those SAGs code for 74,516 genes, which were independently scanned for the GO-terms (profile filter and PROSITE IDs (pattern filter. Following stringent reliability filtering, the non-redundant hits (106 profile hits and 147 pattern hits are classified as reliable, if at least two relevant descriptors (GO-terms and/or consensus patterns are present. Scripts for annotation, as well as for the PPM algorithm, are available through the INDIGO website.

  8. Mining a database of single amplified genomes from Red Sea brine pool extremophiles-improving reliability of gene function prediction using a profile and pattern matching algorithm (PPMA).

    KAUST Repository

    Grötzinger, Stefan W.

    2014-04-07

    Reliable functional annotation of genomic data is the key-step in the discovery of novel enzymes. Intrinsic sequencing data quality problems of single amplified genomes (SAGs) and poor homology of novel extremophile\\'s genomes pose significant challenges for the attribution of functions to the coding sequences identified. The anoxic deep-sea brine pools of the Red Sea are a promising source of novel enzymes with unique evolutionary adaptation. Sequencing data from Red Sea brine pool cultures and SAGs are annotated and stored in the Integrated Data Warehouse of Microbial Genomes (INDIGO) data warehouse. Low sequence homology of annotated genes (no similarity for 35% of these genes) may translate into false positives when searching for specific functions. The Profile and Pattern Matching (PPM) strategy described here was developed to eliminate false positive annotations of enzyme function before progressing to labor-intensive hyper-saline gene expression and characterization. It utilizes InterPro-derived Gene Ontology (GO)-terms (which represent enzyme function profiles) and annotated relevant PROSITE IDs (which are linked to an amino acid consensus pattern). The PPM algorithm was tested on 15 protein families, which were selected based on scientific and commercial potential. An initial list of 2577 enzyme commission (E.C.) numbers was translated into 171 GO-terms and 49 consensus patterns. A subset of INDIGO-sequences consisting of 58 SAGs from six different taxons of bacteria and archaea were selected from six different brine pool environments. Those SAGs code for 74,516 genes, which were independently scanned for the GO-terms (profile filter) and PROSITE IDs (pattern filter). Following stringent reliability filtering, the non-redundant hits (106 profile hits and 147 pattern hits) are classified as reliable, if at least two relevant descriptors (GO-terms and/or consensus patterns) are present. Scripts for annotation, as well as for the PPM algorithm, are available

  9. Mining software specifications methodologies and applications

    CERN Document Server

    Lo, David

    2011-01-01

    An emerging topic in software engineering and data mining, specification mining tackles software maintenance and reliability issues that cost economies billions of dollars each year. The first unified reference on the subject, Mining Software Specifications: Methodologies and Applications describes recent approaches for mining specifications of software systems. Experts in the field illustrate how to apply state-of-the-art data mining and machine learning techniques to address software engineering concerns. In the first set of chapters, the book introduces a number of studies on mining finite

  10. Mine drivage in hydraulic mines

    Energy Technology Data Exchange (ETDEWEB)

    Ehkber, B Ya

    1983-09-01

    From 20 to 25% of labor cost in hydraulic coal mines falls on mine drivage. Range of mine drivage is high due to the large number of shortwalls mined by hydraulic monitors. Reducing mining cost in hydraulic mines depends on lowering drivage cost by use of new drivage systems or by increasing efficiency of drivage systems used at present. The following drivage methods used in hydraulic mines are compared: heading machines with hydraulic haulage of cut rocks and coal, hydraulic monitors with hydraulic haulage, drilling and blasting with hydraulic haulage of blasted rocks. Mining and geologic conditions which influence selection of the optimum mine drivage system are analyzed. Standardized cross sections of mine roadways driven by the 3 methods are shown in schemes. Support systems used in mine roadways are compared: timber supports, roof bolts, roof bolts with steel elements, and roadways driven in rocks without a support system. Heading machines (K-56MG, GPKG, 4PU, PK-3M) and hydraulic monitors (GMDTs-3M, 12GD-2) used for mine drivage are described. Data on mine drivage in hydraulic coal mines in the Kuzbass are discussed. From 40 to 46% of roadways are driven by heading machines with hydraulic haulage and from 12 to 15% by hydraulic monitors with hydraulic haulage.

  11. Reliability Engineering

    International Nuclear Information System (INIS)

    Lee, Sang Yong

    1992-07-01

    This book is about reliability engineering, which describes definition and importance of reliability, development of reliability engineering, failure rate and failure probability density function about types of it, CFR and index distribution, IFR and normal distribution and Weibull distribution, maintainability and movability, reliability test and reliability assumption in index distribution type, normal distribution type and Weibull distribution type, reliability sampling test, reliability of system, design of reliability and functionality failure analysis by FTA.

  12. Web Mining

    Science.gov (United States)

    Fürnkranz, Johannes

    The World-Wide Web provides every internet citizen with access to an abundance of information, but it becomes increasingly difficult to identify the relevant pieces of information. Research in web mining tries to address this problem by applying techniques from data mining and machine learning to Web data and documents. This chapter provides a brief overview of web mining techniques and research areas, most notably hypertext classification, wrapper induction, recommender systems and web usage mining.

  13. Text Mining.

    Science.gov (United States)

    Trybula, Walter J.

    1999-01-01

    Reviews the state of research in text mining, focusing on newer developments. The intent is to describe the disparate investigations currently included under the term text mining and provide a cohesive structure for these efforts. A summary of research identifies key organizations responsible for pushing the development of text mining. A section…

  14. Surface mining

    Science.gov (United States)

    Robert Leopold; Bruce Rowland; Reed Stalder

    1979-01-01

    The surface mining process consists of four phases: (1) exploration; (2) development; (3) production; and (4) reclamation. A variety of surface mining methods has been developed, including strip mining, auger, area strip, open pit, dredging, and hydraulic. Sound planning and design techniques are essential to implement alternatives to meet the myriad of laws,...

  15. Uranium mining

    International Nuclear Information System (INIS)

    Lange, G.

    1975-01-01

    The winning of uranium ore is the first stage of the fuel cycle. The whole complex of questions to be considered when evaluating the profitability of an ore mine is shortly outlined, and the possible mining techniques are described. Some data on uranium mining in the western world are also given. (RB) [de

  16. Contract Mining versus Owner Mining

    African Journals Online (AJOL)

    Owner

    mining companies can concentrate on their core businesses while using specialists for ... 2 Definition of Contract and Owner. Mining ... equipment maintenance, scheduling and budgeting ..... No. Region. Amount Spent on. Contract Mining. ($ billion). Percent of. Total. 1 ... cost and productivity data based on a large range.

  17. Ventilation of uranium mines

    International Nuclear Information System (INIS)

    Francois, Y.; Pradel, J.; Zettwoog, P.; Dumas, M.

    1975-01-01

    In the first part of the paper the authors describe the ventilation of French mines in terms of the primary ventilation system, which brings the outside air close to the working places using the overall structure of the mine to form the airways, and the secondary ventilation system, which is for the distribution of the primary air or for the ventilation of the development drifts and blind tunnels. Brief mention is made of the French regulations on the ventilation of mines in general and uranium mines in particular. The authors describe the equipment used and discuss the installed capacities and air flow per man and per working place. The difficulties encountered in properly ventilating various types of working places are mentioned, such as sub-level development drifts, reinforced stopes, and storage chambers with an artificial crown. The second part of the paper is devoted to computer calculations of the primary ventilation system. It is explained why the Commissariat a l'energie atomique has found it necessary to make these calculations. Without restating the mathematical theories underlying the methods employed, the authors demonstrate how simple measuring instruments and a small-size computer can be used to solve the ventilation problems arising in French mines. Emphasis is given to the layout of the ventilation system and to air flow and negative pressure measurements at the base of the mine. The authors show how calculations can be applied to new heading operations, a change in resistance, the replacement or addition of a ventilator, and a new air inlet or outlet. The authors come to the conclusion that since ventilation is at present the most reliable way of avoiding the pollution of mines, a thorough knowledge of the capabilities in this respect can often help improve working conditions. Despite the progress made, however, constant surveillance of the ventilation systems in uranium mines by a separate team with no responsibility for production problems is

  18. Ventilation of uranium mines

    International Nuclear Information System (INIS)

    Francois, Y.; Pradel, J.; Zettwoog, P.; Dumas, M.

    1975-01-01

    In the first part of the paper the authors describe the ventilation of French mines in terms of the primary ventilation system, which brings the outside air close to the working places using the overall structure of the mine to form the airways, and the secondary ventilation system, which is for the distribution of the primary air or for the ventilation of the development drifts and blind tunnels. Brief mention is made of the French regulations on the ventilation of mines in general and uranium mines in particular. The authors describe the equipment used and discuss the installed capacities and air flow per man and per working place. The difficulties encountered in properly ventilating various types of working places are mentioned, such as sublevel development drifts, reinforced stopes, and storage chambers with an artificial crown. The second part of the paper is devoted to computer calculations of the primary ventilation system. It is explained why the Commissariat a l'energie atomique has found it necessary to make these calculations. Without restating the mathematical theories underlying the methods employed, the authors demonstrate how simple measuring instruments and a small-size computer can be used to solve the ventilation problems arising in French mines. Emphasis is given to the layout of the ventilation system and to air flow and negative pressure measurements at the base of the mine. The authors show how calculations can be applied to new heading operations, a change in resistance, the replacement or addition of a ventilator, and a new air inlet or outlet. The authors come to the conclusion that since ventilation is at present the most reliable way of avoiding the pollution of mines, a thorough knowledge of the capabilities in this respect can often help improve working conditions. Despite the progress made, however, constant surveillance of the ventilation systems in uranium mines by a separate team with no responsibility for production problems is

  19. 30 CFR 75.312 - Main mine fan examinations and records.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Main mine fan examinations and records. 75.312... SAFETY AND HEALTH MANDATORY SAFETY STANDARDS-UNDERGROUND COAL MINES Ventilation § 75.312 Main mine fan examinations and records. (a) To assure electrical and mechanical reliability of main mine fans, each main mine...

  20. Incorporating process mining into human reliability analysis

    NARCIS (Netherlands)

    Kelly, D.L.

    2011-01-01

    It is well established that the human contribution to the risk of operation of complex technological systems is significant, with typical estimates lying in the range of 60-85%. Human errors have been a contributor to many significant catastrophic technological accidents. Examples are 1) the

  1. RELIABILITY OF TRANSPORTATION SYSTEMS OF ROCK HAPS

    Directory of Open Access Journals (Sweden)

    A. Stepanov

    2009-01-01

    Full Text Available The ways of increasing of exploitation reliability of dump trucks with the aim of increasing of effectiveness of exploitation of transportation systems of rock heaps at coal mines.

  2. Mine Water Treatment in Hongai Coal Mines

    OpenAIRE

    Dang Phuong Thao; Dang Vu Chi

    2018-01-01

    Acid mine drainage (AMD) is recognized as one of the most serious environmental problem associated with mining industry. Acid water, also known as acid mine drainage forms when iron sulfide minerals found in the rock of coal seams are exposed to oxidizing conditions in coal mining. Until 2009, mine drainage in Hongai coal mines was not treated, leading to harmful effects on humans, animals and aquatic ecosystem. This report has examined acid mine drainage problem and techniques for acid mine ...

  3. Extending mine life

    International Nuclear Information System (INIS)

    Anon.

    1984-01-01

    Mine layouts, new machines and techniques, research into problem areas of ground control and so on, are highlighted in this report on extending mine life. The main resources taken into account are coal mining, uranium mining, molybdenum and gold mining

  4. Uranium mining

    International Nuclear Information System (INIS)

    2008-01-01

    Full text: The economic and environmental sustainability of uranium mining has been analysed by Monash University researcher Dr Gavin Mudd in a paper that challenges the perception that uranium mining is an 'infinite quality source' that provides solutions to the world's demand for energy. Dr Mudd says information on the uranium industry touted by politicians and mining companies is not necessarily inaccurate, but it does not tell the whole story, being often just an average snapshot of the costs of uranium mining today without reflecting the escalating costs associated with the process in years to come. 'From a sustainability perspective, it is critical to evaluate accurately the true lifecycle costs of all forms of electricity production, especially with respect to greenhouse emissions, ' he says. 'For nuclear power, a significant proportion of greenhouse emissions are derived from the fuel supply, including uranium mining, milling, enrichment and fuel manufacture.' Dr Mudd found that financial and environmental costs escalate dramatically as the uranium ore is used. The deeper the mining process required to extract the ore, the higher the cost for mining companies, the greater the impact on the environment and the more resources needed to obtain the product. I t is clear that there is a strong sensitivity of energy and water consumption and greenhouse emissions to ore grade, and that ore grades are likely to continue to decline gradually in the medium to long term. These issues are critical to the current debate over nuclear power and greenhouse emissions, especially with respect to ascribing sustainability to such activities as uranium mining and milling. For example, mining at Roxby Downs is responsible for the emission of over one million tonnes of greenhouse gases per year and this could increase to four million tonnes if the mine is expanded.'

  5. Software reliability

    CERN Document Server

    Bendell, A

    1986-01-01

    Software Reliability reviews some fundamental issues of software reliability as well as the techniques, models, and metrics used to predict the reliability of software. Topics covered include fault avoidance, fault removal, and fault tolerance, along with statistical methods for the objective assessment of predictive accuracy. Development cost models and life-cycle cost models are also discussed. This book is divided into eight sections and begins with a chapter on adaptive modeling used to predict software reliability, followed by a discussion on failure rate in software reliability growth mo

  6. Social big data mining

    CERN Document Server

    Ishikawa, Hiroshi

    2015-01-01

    Social Media. Big Data and Social Data. Hypotheses in the Era of Big Data. Social Big Data Applications. Basic Concepts in Data Mining. Association Rule Mining. Clustering. Classification. Prediction. Web Structure Mining. Web Content Mining. Web Access Log Mining, Information Extraction and Deep Web Mining. Media Mining. Scalability and Outlier Detection.

  7. The levels of disclosure relating to mine closure obligations by platinum mining companies

    Directory of Open Access Journals (Sweden)

    Joline Sturdy

    2017-06-01

    Aim: The aim of this study is to establish the extent to which platinum mines listed on the Johannesburg Stock Exchange (JSE comply with a recommended disclosure framework. Setting: South Africa is the largest producer of platinum in the world. The study covers all platinum mines listed on the JSE. Methods: Using a framework, a census of the annual financial statements, integrated annual reports and sustainability reports or websites was conducted to determine the level of compliance of disclosure relating to mine closure obligations to the recommended disclosure framework. Results: The results show disclosure relating to mine closure obligations of platinum mines listed on the JSE is inconsistent and not sufficient for stakeholders to understand the scope, key assumptions, parameters or reliability of the assessment and calculation of mine closure obligations. Conclusion: The assumptions used to determine mine closure obligations are specialised and multi-disciplinary. The accuracy and reliability of mine closure obligations will improve dramatically through greater transparency and access to information. It is recommended that the JSE listings for mining companies should require a competent person’s report to provide disclosure on assumptions, key values and processes applied to determine the mine closure obligations. Furthermore, it is recommended that the Department of Mineral Resources implements a mechanism of independent assessment of mine closure obligations by experts on an ongoing basis.

  8. Mine Water Treatment in Hongai Coal Mines

    Science.gov (United States)

    Dang, Phuong Thao; Dang, Vu Chi

    2018-03-01

    Acid mine drainage (AMD) is recognized as one of the most serious environmental problem associated with mining industry. Acid water, also known as acid mine drainage forms when iron sulfide minerals found in the rock of coal seams are exposed to oxidizing conditions in coal mining. Until 2009, mine drainage in Hongai coal mines was not treated, leading to harmful effects on humans, animals and aquatic ecosystem. This report has examined acid mine drainage problem and techniques for acid mine drainage treatment in Hongai coal mines. In addition, selection and criteria for the design of the treatment systems have been presented.

  9. Mine Water Treatment in Hongai Coal Mines

    Directory of Open Access Journals (Sweden)

    Dang Phuong Thao

    2018-01-01

    Full Text Available Acid mine drainage (AMD is recognized as one of the most serious environmental problem associated with mining industry. Acid water, also known as acid mine drainage forms when iron sulfide minerals found in the rock of coal seams are exposed to oxidizing conditions in coal mining. Until 2009, mine drainage in Hongai coal mines was not treated, leading to harmful effects on humans, animals and aquatic ecosystem. This report has examined acid mine drainage problem and techniques for acid mine drainage treatment in Hongai coal mines. In addition, selection and criteria for the design of the treatment systems have been presented.

  10. Human reliability

    International Nuclear Information System (INIS)

    Embrey, D.E.

    1987-01-01

    Concepts and techniques of human reliability have been developed and are used mostly in probabilistic risk assessment. For this, the major application of human reliability assessment has been to identify the human errors which have a significant effect on the overall safety of the system and to quantify the probability of their occurrence. Some of the major issues within human reliability studies are reviewed and it is shown how these are applied to the assessment of human failures in systems. This is done under the following headings; models of human performance used in human reliability assessment, the nature of human error, classification of errors in man-machine systems, practical aspects, human reliability modelling in complex situations, quantification and examination of human reliability, judgement based approaches, holistic techniques and decision analytic approaches. (UK)

  11. Reliability Calculations

    DEFF Research Database (Denmark)

    Petersen, Kurt Erling

    1986-01-01

    Risk and reliability analysis is increasingly being used in evaluations of plant safety and plant reliability. The analysis can be performed either during the design process or during the operation time, with the purpose to improve the safety or the reliability. Due to plant complexity and safety...... and availability requirements, sophisticated tools, which are flexible and efficient, are needed. Such tools have been developed in the last 20 years and they have to be continuously refined to meet the growing requirements. Two different areas of application were analysed. In structural reliability probabilistic...... approaches have been introduced in some cases for the calculation of the reliability of structures or components. A new computer program has been developed based upon numerical integration in several variables. In systems reliability Monte Carlo simulation programs are used especially in analysis of very...

  12. Coastal mining

    Science.gov (United States)

    Bell, Peter M.

    The Exclusive Economic Zone (EEZ) declared by President Reagan in March 1983 has met with a mixed response from those who would benefit from a guaranteed, 200-nautical-mile (370-km) protected underwater mining zone off the coasts of the United States and its possessions. On the one hand, the U.S. Department of the Interior is looking ahead and has been very successful in safeguarding important natural resources that will be needed in the coming decades. On the other hand, the mining industry is faced with a depressed metals and mining market.A report of the Exclusive Economic Zone Symposium held in November 1983 by the U.S. Geological Survey, the Mineral Management Service, and the Bureau of Mines described the mixed response as: “ … The Department of Interior … raring to go into promotion of deep-seal mining but industrial consortia being very pessimistic about the program, at least for the next 30 or so years.” (Chemical & Engineering News, February 5, 1983).

  13. Surface Mines, Other - Longwall Mining Panels

    Data.gov (United States)

    NSGIC Education | GIS Inventory — Coal mining has occurred in Pennsylvania for over a century. A method of coal mining known as Longwall Mining has become more prevalent in recent decades. Longwall...

  14. Process mining

    DEFF Research Database (Denmark)

    van der Aalst, W.M.P.; Rubin, V.; Verbeek, H.M.W.

    2010-01-01

    Process mining includes the automated discovery of processes from event logs. Based on observed events (e.g., activities being executed or messages being exchanged) a process model is constructed. One of the essential problems in process mining is that one cannot assume to have seen all possible...... behavior. At best, one has seen a representative subset. Therefore, classical synthesis techniques are not suitable as they aim at finding a model that is able to exactly reproduce the log. Existing process mining techniques try to avoid such “overfitting” by generalizing the model to allow for more...... support for it). None of the existing techniques enables the user to control the balance between “overfitting” and “underfitting”. To address this, we propose a two-step approach. First, using a configurable approach, a transition system is constructed. Then, using the “theory of regions”, the model...

  15. Mine cross piece

    Energy Technology Data Exchange (ETDEWEB)

    Belik, I P; Gorbatenko, A Ye

    1982-01-01

    The mine cross piece includes main and supplementary parachute-formed cupolas made of air-impermeable fabric, resources for attachment made in the form of shroud lines. In order to improve its reliability with prolonged localization of an underground fire, the cavity between the cupolas connects to the source of fast-hardening material. In this case the cupolas are arranged co-directionally in relation to each other, while the shroud lines of the main are attached to the cupola of the supplemental which is made with perforations.

  16. Data mining

    CERN Document Server

    Gorunescu, Florin

    2011-01-01

    The knowledge discovery process is as old as Homo sapiens. Until some time ago, this process was solely based on the 'natural personal' computer provided by Mother Nature. Fortunately, in recent decades the problem has begun to be solved based on the development of the Data mining technology, aided by the huge computational power of the 'artificial' computers. Digging intelligently in different large databases, data mining aims to extract implicit, previously unknown and potentially useful information from data, since 'knowledge is power'. The goal of this book is to provide, in a friendly way

  17. Mining wastes

    International Nuclear Information System (INIS)

    Pradel, J.

    1981-01-01

    In this article mining wastes means wastes obtained during extraction and processing of uranium ores including production of uraniferous concentrates. The hazards for the population are irradiation, ingestion, dust or radon inhalation. The different wastes produced are reviewed. Management of liquid effluents, water treatment, contamined materials, gaseous wastes and tailings are examined. Environmental impact of wastes during and after exploitation is discussed. Monitoring and measurements are made to verify that ICRP recommendations are met. Studies in progress to improve mining waste management are given [fr

  18. Development trends in mining technologies. [Poland

    Energy Technology Data Exchange (ETDEWEB)

    Sikora, W

    1983-01-01

    Research programs on underground black coal mining in Poland are discussed. It is assumed that no major technology changes will take place by the year 2000. Second generation of mining technologies will be used after the year 2000. The following technologies of the second generation are discussed: in-situ gasification, chemical coal disintegration, manless hydraulic mining with hydraulic transport. Research programs on technologies of the second generation should guarantee their commercial and economic use by the year 2000. The following targets for research programs aimed at increasing productivity, reducing mining cost, reducing labor and increasing safety in mining, covering the next 2 decades are comparatively evaluated: increasing advance rate of longwall faces, increasing machine time of integrated face systems by at least 20%, improving design of powered supports for eliminating rock falls, development of heavy-duty face systems for longwall mining with hydraulic stowing, development of face systems for mining thick coal seams on their whole thickness, slice mining thick coal seams with artificial roofs, bidirectional longwall mining by shearer loaders, use of more elastic and reliable mining systems.

  19. Reliability Engineering

    CERN Document Server

    Lazzaroni, Massimo

    2012-01-01

    This book gives a practical guide for designers and users in Information and Communication Technology context. In particular, in the first Section, the definition of the fundamental terms according to the international standards are given. Then, some theoretical concepts and reliability models are presented in Chapters 2 and 3: the aim is to evaluate performance for components and systems and reliability growth. Chapter 4, by introducing the laboratory tests, puts in evidence the reliability concept from the experimental point of view. In ICT context, the failure rate for a given system can be

  20. Reliability training

    Science.gov (United States)

    Lalli, Vincent R. (Editor); Malec, Henry A. (Editor); Dillard, Richard B.; Wong, Kam L.; Barber, Frank J.; Barina, Frank J.

    1992-01-01

    Discussed here is failure physics, the study of how products, hardware, software, and systems fail and what can be done about it. The intent is to impart useful information, to extend the limits of production capability, and to assist in achieving low cost reliable products. A review of reliability for the years 1940 to 2000 is given. Next, a review of mathematics is given as well as a description of what elements contribute to product failures. Basic reliability theory and the disciplines that allow us to control and eliminate failures are elucidated.

  1. Biomarker Identification Using Text Mining

    Directory of Open Access Journals (Sweden)

    Hui Li

    2012-01-01

    Full Text Available Identifying molecular biomarkers has become one of the important tasks for scientists to assess the different phenotypic states of cells or organisms correlated to the genotypes of diseases from large-scale biological data. In this paper, we proposed a text-mining-based method to discover biomarkers from PubMed. First, we construct a database based on a dictionary, and then we used a finite state machine to identify the biomarkers. Our method of text mining provides a highly reliable approach to discover the biomarkers in the PubMed database.

  2. Mining Method

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Young Shik; Lee, Kyung Woon; Kim, Oak Hwan; Kim, Dae Kyung [Korea Institute of Geology Mining and Materials, Taejon (Korea, Republic of)

    1996-12-01

    The reducing coal market has been enforcing the coal industry to make exceptional rationalization and restructuring efforts since the end of the eighties. To the competition from crude oil and natural gas has been added the growing pressure from rising wages and rising production cost as the workings get deeper. To improve the competitive position of the coal mines against oil and gas through cost reduction, studies to improve mining system have been carried out. To find fields requiring improvements most, the technologies using in Tae Bak Colliery which was selected one of long running mines were investigated and analyzed. The mining method appeared the field needing improvements most to reduce the production cost. The present method, so-called inseam roadway caving method presently is using to extract the steep and thick seam. However, this method has several drawbacks. To solve the problems, two mining methods are suggested for a long term and short term method respectively. Inseam roadway caving method with long-hole blasting method is a variety of the present inseam roadway caving method modified by replacing timber sets with steel arch sets and the shovel loaders with chain conveyors. And long hole blasting is introduced to promote caving. And pillar caving method with chock supports method uses chock supports setting in the cross-cut from the hanging wall to the footwall. Two single chain conveyors are needed. One is installed in front of chock supports to clear coal from the cutting face. The other is installed behind the supports to transport caved coal from behind. This method is superior to the previous one in terms of safety from water-inrushes, production rate and productivity. The only drawback is that it needs more investment. (author). 14 tabs., 34 figs.

  3. Reliability calculations

    International Nuclear Information System (INIS)

    Petersen, K.E.

    1986-03-01

    Risk and reliability analysis is increasingly being used in evaluations of plant safety and plant reliability. The analysis can be performed either during the design process or during the operation time, with the purpose to improve the safety or the reliability. Due to plant complexity and safety and availability requirements, sophisticated tools, which are flexible and efficient, are needed. Such tools have been developed in the last 20 years and they have to be continuously refined to meet the growing requirements. Two different areas of application were analysed. In structural reliability probabilistic approaches have been introduced in some cases for the calculation of the reliability of structures or components. A new computer program has been developed based upon numerical integration in several variables. In systems reliability Monte Carlo simulation programs are used especially in analysis of very complex systems. In order to increase the applicability of the programs variance reduction techniques can be applied to speed up the calculation process. Variance reduction techniques have been studied and procedures for implementation of importance sampling are suggested. (author)

  4. Systems reliability/structural reliability

    International Nuclear Information System (INIS)

    Green, A.E.

    1980-01-01

    The question of reliability technology using quantified techniques is considered for systems and structures. Systems reliability analysis has progressed to a viable and proven methodology whereas this has yet to be fully achieved for large scale structures. Structural loading variants over the half-time of the plant are considered to be more difficult to analyse than for systems, even though a relatively crude model may be a necessary starting point. Various reliability characteristics and environmental conditions are considered which enter this problem. The rare event situation is briefly mentioned together with aspects of proof testing and normal and upset loading conditions. (orig.)

  5. Mine games

    Energy Technology Data Exchange (ETDEWEB)

    Patchett, A. [Hitachi Construction Equipment (United Kingdom)

    2006-09-15

    The article describes various excavators used in the UK by Hall Construction for coal mining and reclamation projects. They include machines from Hitachi Construction Machinery that have been modified with a coal shovel at the front end. The ZX350LC-3, for example incorporates a coal shovel, manufactured by Kocurek, to allow it to work at the rock face and lift coal into road wagons or dump trucks. 5 figs.

  6. Human reliability

    International Nuclear Information System (INIS)

    Bubb, H.

    1992-01-01

    This book resulted from the activity of Task Force 4.2 - 'Human Reliability'. This group was established on February 27th, 1986, at the plenary meeting of the Technical Reliability Committee of VDI, within the framework of the joint committee of VDI on industrial systems technology - GIS. It is composed of representatives of industry, representatives of research institutes, of technical control boards and universities, whose job it is to study how man fits into the technical side of the world of work and to optimize this interaction. In a total of 17 sessions, information from the part of ergonomy dealing with human reliability in using technical systems at work was exchanged, and different methods for its evaluation were examined and analyzed. The outcome of this work was systematized and compiled in this book. (orig.) [de

  7. Microelectronics Reliability

    Science.gov (United States)

    2017-01-17

    inverters  connected in a chain. ................................................. 5  Figure 3  Typical graph showing frequency versus square root of...developing an experimental  reliability estimating methodology that could both illuminate the  lifetime  reliability of advanced devices,  circuits and...or  FIT of the device. In other words an accurate estimate of the device  lifetime  was found and thus the  reliability  that  can  be  conveniently

  8. Proceedings. Fourth international symposium on mine mechanisation and automation

    Energy Technology Data Exchange (ETDEWEB)

    Gurgenci, H.; Hood, M. [eds.

    1997-12-31

    Papers in the first volume are presented under the following session headings: drilling; mining robotics; machine monitoring; mine automation systems; reliability and maintenance; mine automation - communications mechanical excavation of medium-strength rock; and new mining equipment technologies. The second volume covers: mechanical excavation of hard rock; autonomous vehicles; mechanical excavation industry experience; machine guidance; applications of rock mechanics, mine planning management and scheduling; orebody delineation; and safety. Selected papers have been abstracted separately for the IEA Coal Research databases available on CD-ROM and the worldwide web.

  9. The Hazards of Data Mining in Healthcare.

    Science.gov (United States)

    Househ, Mowafa; Aldosari, Bakheet

    2017-01-01

    From the mid-1990s, data mining methods have been used to explore and find patterns and relationships in healthcare data. During the 1990s and early 2000's, data mining was a topic of great interest to healthcare researchers, as data mining showed some promise in the use of its predictive techniques to help model the healthcare system and improve the delivery of healthcare services. However, it was soon discovered that mining healthcare data had many challenges relating to the veracity of healthcare data and limitations around predictive modelling leading to failures of data mining projects. As the Big Data movement has gained momentum over the past few years, there has been a reemergence of interest in the use of data mining techniques and methods to analyze healthcare generated Big Data. Much has been written on the positive impacts of data mining on healthcare practice relating to issues of best practice, fraud detection, chronic disease management, and general healthcare decision making. Little has been written about the limitations and challenges of data mining use in healthcare. In this review paper, we explore some of the limitations and challenges in the use of data mining techniques in healthcare. Our results show that the limitations of data mining in healthcare include reliability of medical data, data sharing between healthcare organizations, inappropriate modelling leading to inaccurate predictions. We conclude that there are many pitfalls in the use of data mining in healthcare and more work is needed to show evidence of its utility in facilitating healthcare decision-making for healthcare providers, managers, and policy makers and more evidence is needed on data mining's overall impact on healthcare services and patient care.

  10. Exploration and Mining Roadmap

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2002-09-01

    This Exploration and Mining Technology Roadmap represents the third roadmap for the Mining Industry of the Future. It is based upon the results of the Exploration and Mining Roadmap Workshop held May 10 ñ 11, 2001.

  11. Ghana Mining Journal

    African Journals Online (AJOL)

    ... in the Ghana mining journal: Geology and Mineral Exploration, Mining, Quarrying, Geomechanics, Groundwater Studies, Hydrocarbon Development, Mineral Processing, Metallurgy, Material Science, Mineral Management Policies, Mineral Economics, Environmental Aspects, Computer Applications and Mining Education.

  12. Coal Mine Permit Boundaries

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — ESRI ArcView shapefile depicting New Mexico coal mines permitted under the Surface Mining Control and Reclamation Act of 1977 (SMCRA), by either the NM Mining these...

  13. Uranium mining in Australia

    International Nuclear Information System (INIS)

    Anon.

    1984-01-01

    The mining of uranium in Australia is criticised in relation to it's environmental impact, economics and effects on mine workers and Aborigines. A brief report is given on each of the operating and proposed uranium mines in Australia

  14. Instrumentation for mine safety: fire and smoke problems and solutions

    International Nuclear Information System (INIS)

    Stevens, R.B.

    1982-01-01

    Underground fires continue to be one of the most serious hazards to life and property in the mining industry. Although underground mines are analogous to high-rise buildings where persons are isolated from immediate escape or rescue, application of technology to locate and control fire hazards while still in their controllable state is slow to be implemented in underground mines. This paper describes several USBM (Bureau of Mines) safety programs which included in-mine testing with mine fire and smoke sensors, telemetry and instrumentation to develop recommendations for improving mine fire safety. It is hoped that the technology developed during these programs can be added to other programs to provide the mining industry with the necessary fire safety facts. By recognizing fire potentials and being provided with cost-effective, proven components that will perform reliably under the poor environmental conditions of mining, mine operators can provide protection for their working life and property equal to that which they provide for themselves and their families at home. The basis of this report is two USBM programs for fire protection in metal and nonmetal mines and one coal program. The data was collected beginning in May 1974 and continuing through the present with underground tests of a South African fire system installed at Magma Mine in Superior, Arizona, and a computer-assisted, experimental system at Peabody Coal Mine in Pawnee, Illinois

  15. Mining royalties

    Directory of Open Access Journals (Sweden)

    Jelenković Rade J.

    2014-01-01

    Full Text Available Mineral resources are finite and nonrenewable in the sense that their extraction permanently depletes a country's resource inventory. The role of governments should be to manage the exploitation of these resources to maximize the economic benefits to their community, consistent with the need to attract and retain the exploration and development capital necessary to continue to realize these benefits for as long as possible. In designing mineral sector taxation systems, policy makers must carefully seek to balance tax types, rates, and incentives that satisfy the needs of both the nation and the mining investor.

  16. Redefining reliability

    International Nuclear Information System (INIS)

    Paulson, S.L.

    1995-01-01

    Want to buy some reliability? The question would have been unthinkable in some markets served by the natural gas business even a few years ago, but in the new gas marketplace, industrial, commercial and even some residential customers have the opportunity to choose from among an array of options about the kind of natural gas service they need--and are willing to pay for. The complexities of this brave new world of restructuring and competition have sent the industry scrambling to find ways to educate and inform its customers about the increased responsibility they will have in determining the level of gas reliability they choose. This article discusses the new options and the new responsibilities of customers, the needed for continuous education, and MidAmerican Energy Company's experiment in direct marketing of natural gas

  17. Statistical methods for decision making in mine action

    DEFF Research Database (Denmark)

    Larsen, Jan

    The design and evaluation of mine clearance equipment – the problem of reliability * Detection probability – tossing a coin * Requirements in mine action * Detection probability and confidence in MA * Using statistics in area reduction Improving performance by information fusion and combination...

  18. Equipment size effects on open pit mining performance

    Energy Technology Data Exchange (ETDEWEB)

    A. Bozorgebrahimi; R.A. Hall; M.A. Morin [University of British Columbia, Vancouver, BC (Canada). Mining Engineering Department

    2005-03-01

    This paper discusses the exploitation of economies of scale in open pit mining through the use of increasingly larger equipment. It presents a method adopted to evaluate the impact of increased scale on operational performance factors. The work identifies equipment size sensitive variables (ESSVs) in the mine design process that affect the performance of the production process. Data from a set of case studies show that the ESSV influence extends beyond mine production to encompass milling performance, environmental footprint and community impacts. Some ESSVs (such as reliability, tyre costs and productivity) are shown to be related to the current state of equipment technology and their effects are therefore comparable for different mines. Other ESSVs relate to the mine and deposit characteristics; their effects therefore vary from mine to mine. A detailed analytical approach, developed to model the impact of ESSVs, suggests that for truck/shovel operations, the industry may be approaching a situation of diseconomies of scale.

  19. Uranium mining

    International Nuclear Information System (INIS)

    Cheeseman, E.W.

    1980-01-01

    The international uranium market appears to be currently over-supplied with a resultant softening in prices. Buyers on the international market are unhappy about some of the restrictions placed on sales by the government, and Canadian sales may suffer as a result. About 64 percent of Canada's shipments come from five operating Ontario mines, with the balance from Saskatchewan. Several other properties will be producing within the next few years. In spite of the adverse effects of the Three Mile Island incident and the default by the T.V.A. of their contract, some 3 600 tonnes of new uranium sales were completed during the year. The price for uranium had stabilized at US $42 - $44 by mid 1979, but by early 1980 had softened somewhat. The year 1979 saw the completion of major environmental hearings in Ontario and Newfoundland and the start of the B.C. inquiry. Two more hearings are scheduled for Saskatchewan in 1980. The Elliot Lake uranium mining expansion hearings are reviewed, as are other recent hearings. In the production of uranium for nuclear fuel cycle, environmental matters are of major concern to the industry, the public and to governments. Research is being conducted to determine the most effective method for removing radium from tailings area effluents. Very stringent criteria are being drawn up by the regulatory agencies that must be met by the industry in order to obtain an operating licence from the AECB. These criteria cover seepages from the tailings basin and through the tailings retention dam, seismic stability, and both short and long term management of the tailings waste management area. (auth)

  20. Kiruna research mine

    Energy Technology Data Exchange (ETDEWEB)

    Oestensen, A

    1983-12-01

    The research mine at Kiruna is the first large-scale mining research project sponsored by the Swedish government. Under the leadership of the Swedish Mining Research Foundation, a five-year project involving development of new mining systems and machinery will be carried out in cooperation with the Lulea Institute of Technology and a number of Swedish industrial companies.

  1. Application for trackless mining technique in Benxi uranium mine

    International Nuclear Information System (INIS)

    Chen Bingguo

    1998-01-01

    The author narrates the circumstances achieving constructional target in Benxi Uranium Mine under relying on advance of science and technology and adopting small trackless mining equipment, presents the application of trackless mining equipment at mining small mine and complex mineral deposit and discusses the unique superiority of trackless mining technique in development work, mining preparation work and backstoping

  2. An Introduction To Reliability

    International Nuclear Information System (INIS)

    Park, Kyoung Su

    1993-08-01

    This book introduces reliability with definition of reliability, requirement of reliability, system of life cycle and reliability, reliability and failure rate such as summary, reliability characteristic, chance failure, failure rate which changes over time, failure mode, replacement, reliability in engineering design, reliability test over assumption of failure rate, and drawing of reliability data, prediction of system reliability, conservation of system, failure such as summary and failure relay and analysis of system safety.

  3. Robust processing of mining subsidence monitoring data

    Energy Technology Data Exchange (ETDEWEB)

    Mingzhong, Wang; Guogang, Huang [Pingdingshan Mining Bureau (China); Yunjia, Wang; Guogangli, [China Univ. of Mining and Technology, Xuzhou (China)

    1997-12-31

    Since China began to do research on mining subsidence in 1950s, more than one thousand lines have been observed. Yet, monitoring data sometimes contain quite a lot of outliers because of the limit of observation and geological mining conditions. In China, nowdays, the method of processing mining subsidence monitoring data is based on the principle of the least square method. It is possible to produce lower accuracy, less reliability, or even errors. For reason given above, the authors, according to Chinese actual situation, have done some research work on the robust processing of mining subsidence monitoring data in respect of how to get prediction parameters. The authors have derived related formulas, designed some computational programmes, done a great quantity of actual calculation and simulation, and achieved good results. (orig.)

  4. Robust processing of mining subsidence monitoring data

    Energy Technology Data Exchange (ETDEWEB)

    Wang Mingzhong; Huang Guogang [Pingdingshan Mining Bureau (China); Wang Yunjia; Guogangli [China Univ. of Mining and Technology, Xuzhou (China)

    1996-12-31

    Since China began to do research on mining subsidence in 1950s, more than one thousand lines have been observed. Yet, monitoring data sometimes contain quite a lot of outliers because of the limit of observation and geological mining conditions. In China, nowdays, the method of processing mining subsidence monitoring data is based on the principle of the least square method. It is possible to produce lower accuracy, less reliability, or even errors. For reason given above, the authors, according to Chinese actual situation, have done some research work on the robust processing of mining subsidence monitoring data in respect of how to get prediction parameters. The authors have derived related formulas, designed some computational programmes, done a great quantity of actual calculation and simulation, and achieved good results. (orig.)

  5. Mining process performance from event logs

    NARCIS (Netherlands)

    Adriansyah, A.; Buijs, J.C.A.M.; La Rosa, M.; Soffer, P.

    2013-01-01

    In systems where process executions are not strictly enforced by a predefined process model, obtaining reliable performance information is not trivial. In this paper, we analyzed an event log of a real-life process, taken from a Dutch financial institute, using process mining techniques. In

  6. Performance evaluation methods and instrumentation for mine ventilation fans

    Institute of Scientific and Technical Information of China (English)

    LI Man; WANG Xue-rong

    2009-01-01

    Ventilation fans are one of the most important pieces of equipment in coal mines. Their performance plays an important role in the safety of staff and production. Given the actual requirements of coal mine production, we instituted a research project on the measurement methods of key performance parameters such as wind pressure, amount of ventilation and power. At the end a virtual instrument for mine ventilation fans performance evaluation was developed using a USB interface. The practical perform-ance and analytical results of our experiments show that it is feasible, reliable and effective to use the proposed instrumentation for mine ventilation performance evaluation.

  7. Mining with communities

    International Nuclear Information System (INIS)

    Veiga, Marcello M.; Scoble, Malcolm; McAllister, Mary Louise

    2001-01-01

    To be considered as sustainable, a mining community needs to adhere to the principles of ecological sustainability, economic vitality and social equity. These principles apply over a long time span, covering both the life of the mine and post-mining closure. The legacy left by a mine to the community after its closure is emerging as a significant aspect of its planning. Progress towards sustainability is made when value is added to a community with respect to these principles by the mining operation during its life cycle. This article presents a series of cases to demonstrate the diverse potential challenges to achieving a sustainable mining community. These case studies of both new and old mining communities are drawn mainly from Canada and from locations abroad where Canadian companies are now building mines. The article concludes by considering various approaches that can foster sustainable mining communities and the role of community consultation and capacity building. (author)

  8. Protective and control relays as coal-mine power-supply ACS subsystem

    Science.gov (United States)

    Kostin, V. N.; Minakova, T. E.

    2017-10-01

    The paper presents instantaneous selective short-circuit protection for the cabling of the underground part of a coal mine and central control algorithms as a Coal-Mine Power-Supply ACS Subsystem. In order to improve the reliability of electricity supply and reduce the mining equipment down-time, a dual channel relay protection and central control system is proposed as a subsystem of the coal-mine power-supply automated control system (PS ACS).

  9. South African mine valuation

    Energy Technology Data Exchange (ETDEWEB)

    Storrar, C D

    1977-01-01

    This article sets out the basic concepts of mine valuation, with gold mining receiving more space than base minerals and coal. Sampling practice is given special attention. Chapter headings are methods of investigation, sampling, underground sampling, averaging of underground sampling, diamond-drill sampling, mass and mineral content of ore, organization of a sample office, working costs, mining pay limits, ore reserves, ore accounting, maintenance of grade, forecasting operations and life of mine, statistical mine valuation, state's share of profits and taxation, and financial valuation of mining ventures.

  10. Contract Mining versus Owner Mining – The Way Forward | Suglo ...

    African Journals Online (AJOL)

    Ghana Mining Journal ... By contracting out one or more of their mining operations, the mining companies can concentrate on their core businesses. This paper reviews ... The general trends in the mining industry show that contract mining will be the way forward for most mines under various circumstances in the future.

  11. Optimization of mining design of Hongwei uranium mine

    International Nuclear Information System (INIS)

    Wu Sanmao; Yuan Baixiang

    2012-01-01

    Combined with the mining conditions of Hongwei uranium mine, optimization schemes for hoisting cage, mine drainge,ore transport, mine wastewater treatment, power-supply system,etc are put forward in the mining design of the mine. Optimized effects are analyzed from the aspects of technique, economy, and energy saving and reducing emissions. (authors)

  12. Identification of mine waters by statistical multivariate methods

    Energy Technology Data Exchange (ETDEWEB)

    Mali, N [IGGG, Ljubljana (Slovenia)

    1992-01-01

    Three water-bearing aquifers are present in the Velenje lignite mine. The aquifer waters have differing chemical composition; a geochemical water analysis can therefore determine the source of mine water influx. Mine water samples from different locations in the mine were analyzed, the results of chemical content and of electric conductivity of mine water were statistically processed by means of MICROGAS, SPSS-X and IN STATPAC computer programs, which apply three multivariate statistical methods (discriminate, cluster and factor analysis). Reliability of calculated values was determined with the Kolmogorov and Smirnov tests. It is concluded that laboratory analysis of single water samples can produce measurement errors, but statistical processing of water sample data can identify origin and movement of mine water. 15 refs.

  13. Text mining by Tsallis entropy

    Science.gov (United States)

    Jamaati, Maryam; Mehri, Ali

    2018-01-01

    Long-range correlations between the elements of natural languages enable them to convey very complex information. Complex structure of human language, as a manifestation of natural languages, motivates us to apply nonextensive statistical mechanics in text mining. Tsallis entropy appropriately ranks the terms' relevance to document subject, taking advantage of their spatial correlation length. We apply this statistical concept as a new powerful word ranking metric in order to extract keywords of a single document. We carry out an experimental evaluation, which shows capability of the presented method in keyword extraction. We find that, Tsallis entropy has reliable word ranking performance, at the same level of the best previous ranking methods.

  14. Uranium mining in Australia

    International Nuclear Information System (INIS)

    Anon.

    1980-01-01

    Known uranium deposits and the companies involved in uranium mining and exploration in Australia are listed. The status of the development of the deposits is outlined and reasons for delays to mining are given

  15. Mines and Mineral Resources

    Data.gov (United States)

    Department of Homeland Security — Mines in the United States According to the Homeland Security Infrastructure Program Tiger Team Report Table E-2.V.1 Sub-Layer Geographic Names, a mine is defined as...

  16. Mining Views : database views for data mining

    NARCIS (Netherlands)

    Blockeel, H.; Calders, T.; Fromont, É.; Goethals, B.; Prado, A.

    2008-01-01

    We present a system towards the integration of data mining into relational databases. To this end, a relational database model is proposed, based on the so called virtual mining views. We show that several types of patterns and models over the data, such as itemsets, association rules and decision

  17. Mining Views : database views for data mining

    NARCIS (Netherlands)

    Blockeel, H.; Calders, T.; Fromont, É.; Goethals, B.; Prado, A.; Nijssen, S.; De Raedt, L.

    2007-01-01

    We propose a relational database model towards the integration of data mining into relational database systems, based on the so called virtual mining views. We show that several types of patterns and models over the data, such as itemsets, association rules, decision trees and clusterings, can be

  18. Uranium mine ventilation

    International Nuclear Information System (INIS)

    Katam, K.; Sudarsono

    1982-01-01

    Uranium mine ventilation system aimed basically to control and decreasing the air radioactivity in mine caused by the radon emanating from uranium ore. The control and decreasing the air ''age'' in mine, with adding the air consumption volume, increasing the air rate consumption, closing the mine-out area; using closed drainage system. Air consumption should be 60m 3 /minute for each 9m 2 uranium ore surfaces with ventilation rate of 15m/minute. (author)

  19. MONITORING OF MINING

    Directory of Open Access Journals (Sweden)

    Berislav Šebečić

    1996-12-01

    Full Text Available The way mining was monitored in the past depended on knowledge, interest and the existing legal regulations. Documentary evidence about this work can be found in archives, libraries and museums. In particular, there is the rich archival material (papers and books concerning the work of the one-time Imperial and Royal Mining Captaincies in Zagreb, Zadar, Klagenfurt and Split, A minor part of the documentation has not yet been transferred to Croatia. From mining handbooks and books we can also find out about mining in Croatia. In the context of Austro-Hungary. For example, we can find out that the first governorships in Zagreb and Zadar headed the Ban, Count Jelacic and Baron Mamula were also the top mining authorities, though this, probably from political motives, was suppressed in the guides and inventories or the Mining Captaincies. At the end of the 1850s, Croatia produced 92-94% of sea salt, up to 8.5% of sulphur, 19.5% of asphalt and 100% of oil for the Austro-Hungarian empire. From data about mining in the Split Mining Captaincy, prepared for the Philadephia Exhibition, it can be seen that in the exploratory mining operations in which there were 33,372 independent mines declared in 1925 they were looking mainly for bauxite (60,0%, then dark coal (19,0%, asphalts (10.3% and lignites (62%. In 1931, within the area covered by the same captaincy, of 74 declared mines, only 9 were working. There were five coal mines, three bauxite mines and one for asphalt. I suggest that within state institution, the Mining Captaincy or Authority be renewed, or that a Mining and Geological Authority be set ap, which would lead to the more complete affirmation of Croatian mining (the paper is published in Croatian.

  20. Mine drainage treatment

    OpenAIRE

    Golomeova, Mirjana; Zendelska, Afrodita; Krstev, Boris; Golomeov, Blagoj; Krstev, Aleksandar

    2012-01-01

    Water flowing from underground and surface mines and contains high concentrations of dissolved metals is called mine drainage. Mine drainage can be categorized into several basic types by their alkalinity or acidity. Sulfide rich and carbonate poor materials are expected to produce acidic drainage, and alkaline rich materials, even with significant sulfide concentrations, often produce net alkaline water. Mine drainages are dangerous because pollutants may decompose in the environment. In...

  1. Mining in El Salvador

    DEFF Research Database (Denmark)

    Pacheco Cueva, Vladimir

    2014-01-01

    In this guest article, Vladimir Pacheco, a social scientist who has worked on mining and human rights shares his perspectives on a current campaign against mining in El Salvador – Central America’s smallest but most densely populated country.......In this guest article, Vladimir Pacheco, a social scientist who has worked on mining and human rights shares his perspectives on a current campaign against mining in El Salvador – Central America’s smallest but most densely populated country....

  2. Frontiers of reliability

    CERN Document Server

    Basu, Asit P; Basu, Sujit K

    1998-01-01

    This volume presents recent results in reliability theory by leading experts in the world. It will prove valuable for researchers, and users of reliability theory. It consists of refereed invited papers on a broad spectrum of topics in reliability. The subjects covered include Bayesian reliability, Bayesian reliability modeling, confounding in a series system, DF tests, Edgeworth approximation to reliability, estimation under random censoring, fault tree reduction for reliability, inference about changes in hazard rates, information theory and reliability, mixture experiment, mixture of Weibul

  3. The mining methods at the Fraisse mine

    International Nuclear Information System (INIS)

    Heurley, P.; Vervialle, J.P.

    1985-01-01

    The Fraisse mine is one of the four underground mines of the La Crouzille mining divisions of Cogema. Faced with the necessity to mechanize its workings, this mine also had to satisfy a certain number of stringent demands. This has led to concept of four different mining methods for the four workings at present in active operation at this pit, which nevertheless preserve the basic ideas of the methods of top slicing under concrete slabs (TSS) or horizontal cut-and-fill stopes (CFS). An electric scooptram is utilized. With this type of vehicle the stringent demands for the introduction of means for fire fighting and prevention are reduced to a minimum. Finally, the dimensions of the vehicles and the operation of these methods result in a net-to-gross tonnages of close to 1, i.e. a maximum output, combined with a minimum of contamination [fr

  4. Data Mining for CRM

    Science.gov (United States)

    Thearling, Kurt

    Data Mining technology allows marketing organizations to better understand their customers and respond to their needs. This chapter describes how Data Mining can be combined with customer relationship management to help drive improved interactions with customers. An example showing how to use Data Mining to drive customer acquisition activities is presented.

  5. Colombian mining legislation

    International Nuclear Information System (INIS)

    Mendoza Delgado, Eva Isolina

    2004-01-01

    The paper makes a historical recount of the mining legislation in Colombia, it is about the more relevant aspects of the Code of Mines, like they are the title miner, obligations, economic aspects, integration of mining areas and of the benefits contemplated in the law 685 of 2001

  6. Mine waste management

    International Nuclear Information System (INIS)

    Hutchinson, I.P.G.; Ellison, R.D.

    1992-01-01

    This book reports on mine waste management. Topics covered include: Performance review of modern mine waste management units; Mine waste management requirements; Prediction of acid generation potential; Attenuation of chemical constituents; Climatic considerations; Liner system design; Closure requirements; Heap leaching; Ground water monitoring; and Economic impact evaluation

  7. Mining compressing sequential problems

    NARCIS (Netherlands)

    Hoang, T.L.; Mörchen, F.; Fradkin, D.; Calders, T.G.K.

    2012-01-01

    Compression based pattern mining has been successfully applied to many data mining tasks. We propose an approach based on the minimum description length principle to extract sequential patterns that compress a database of sequences well. We show that mining compressing patterns is NP-Hard and

  8. Mined-out land

    International Nuclear Information System (INIS)

    Reinsalu, Enno; Toomik, Arvi; Valgma, Ingo

    2002-01-01

    Estonian mineral resources are deposited in low depth and mining fields are large, therefore vast areas are affected by mining. There are at least 800 deposits with total area of 6,000 km 2 and about the same number of underground mines, surface mines, peat fields, quarries, and sand and gravel pits. The deposits cover more than 10% of Estonian mainland. The total area of operating mine claims exceeds 150 km 2 that makes 0.3 % of Estonian area. The book is written mainly for the people who are living or acting in the area influenced by mining. The observations and research could benefit those who are interested in geography and environment, who follow formation and look of mined-out landscapes. The book contains also warnings for careless people on and under the surface of the mined-out land. Part of the book contains results of the research made in 1968-1993 by the first two authors working at the Estonian branch of A.Skochinsky Institute of Mining. Since 1990, Arvi Toomik continued this study at the Northeastern section of the Institute of Ecology of Tallinn Pedagogical University. Enno Reinsalu studied aftereffects of mining at the Mining Department of Tallinn Technical University from 1998 to 2000. Geographical Information System for Mining was studied by Ingo Valgma within his doctoral dissertation, and this book is one of the applications of his study

  9. Mine water treatment

    Energy Technology Data Exchange (ETDEWEB)

    Komissarov, S V

    1980-10-01

    This article discusses composition of chemical compounds dissolved or suspended in mine waters in various coal basins of the USSR: Moscow basin, Kuzbass, Pechora, Kizelovsk, Karaganda, Donetsk and Chelyabinsk basins. Percentage of suspended materials in water depending on water source (water from water drainage system of dust suppression system) is evaluated. Pollution of mine waters with oils and coli bacteria is also described. Recommendations on construction, capacity of water settling tanks, and methods of mine water treatment are presented. In mines where coal seams 2 m or thicker are mined a system of two settling tanks should be used: in the upper one large grains are settled, in the lower one finer grains. The upper tank should be large enough to store mine water discharged during one month, and the lower one to store water discharged over two months. Salty waters from coal mines mining thin coal seams should be treated in a system of water reservoirs from which water evaporates (if climatic conditions permit). Mine waters from mines with thin coal seams but without high salt content can be treated in a system of long channels with water plants, which increase amount of oxygen in treated water. System of biological treatment of waste waters from mine wash-houses and baths is also described. Influence of temperature, sunshine and season of the year on efficiency of mine water treatment is also assessed. (In Russian)

  10. Mountaintop mining consequences

    Science.gov (United States)

    M.A. Palmer; E.S. Bernhardt; W.H. Schlesinger; K.N. Eshleman; E. Foufoula-Georgiou; M.S. Hendryx; A.D. Lemly; G.E. Likens; O.L. Loucks; M.E. Power; P.S. White; P.R. Wilcock

    2010-01-01

    There has been a global, 30-year increase in surface mining (1), which is now the dominant driver of land-use change in the central Appalachian ecoregion of the United States (2). One major form of such mining, mountaintop mining with valley fills (MTM/VF) (3), is widespread throughout eastern Kentucky, West Virginia (WV), and southwestern Virginia. Upper elevation...

  11. Ghana Mining Journal: Contact

    African Journals Online (AJOL)

    Principal Contact. Professor Daniel Mireku-Gyimah Editor-in-Chief University of Mines & Technology Ghana Mining Journal University of Mines & Technology P. O. BOX 237 Tarkwa Ghana Phone: +233 362 20280/20324. Fax: +233 362 20306. Email: dm.gyimah@umat.edu.gh ...

  12. Availability analysis of selected mining machinery

    Directory of Open Access Journals (Sweden)

    Brodny Jarosław

    2017-06-01

    Full Text Available Underground extraction of coal is characterized by high variability of mining and geological conditions in which it is conducted. Despite ever more effective methods and tools, used to identify the factors influencing this process, mining machinery, used in mining underground, work in difficult and not always foreseeable conditions, which means that these machines should be very universal and reliable. Additionally, a big competition, occurring on the coal market, causes that it is necessary to take action in order to reduce the cost of its production, e.g. by increasing the efficiency of utilization machines. To meet this objective it should be pro-ceed with analysis presented in this paper. The analysis concerns to availability of utilization selected mining machinery, conducted using the model of OEE, which is a tool for quantitative estimate strategy TPM. In this article we considered the machines being part of the mechanized longwall complex and the basis of analysis was the data recording by the industrial automation system. Using this data set we evaluated the availability of studied machines and the structure of registered breaks in their work. The results should be an important source of information for maintenance staff and management of mining plants, needed to improve the economic efficiency of underground mining.

  13. Hardening Stratum, the Bitcoin Pool Mining Protocol

    Directory of Open Access Journals (Sweden)

    Recabarren Ruben

    2017-07-01

    Full Text Available Stratum, the de-facto mining communication protocol used by blockchain based cryptocurrency systems, enables miners to reliably and efficiently fetch jobs from mining pool servers. In this paper we exploit Stratum’s lack of encryption to develop passive and active attacks on Bitcoin’s mining protocol, with important implications on the privacy, security and even safety of mining equipment owners. We introduce StraTap and ISP Log attacks, that infer miner earnings if given access to miner communications, or even their logs. We develop BiteCoin, an active attack that hijacks shares submitted by miners, and their associated payouts. We build BiteCoin on WireGhost, a tool we developed to hijack and surreptitiously maintain Stratum connections. Our attacks reveal that securing Stratum through pervasive encryption is not only undesirable (due to large overheads, but also ineffective: an adversary can predict miner earnings even when given access to only packet timestamps. Instead, we devise Bedrock, a minimalistic Stratum extension that protects the privacy and security of mining participants. We introduce and leverage the mining cookie concept, a secret that each miner shares with the pool and includes in its puzzle computations, and that prevents attackers from reconstructing or hijacking the puzzles.

  14. 5G in Open-Pit Mines

    DEFF Research Database (Denmark)

    Portela Lopes de Almeida, Erika; Caldwell, George; Rodriguez Larrad, Ignacio

    2017-01-01

    5G will play a pivotal role in the digitization of the industrial sector and is expected to make the best use of every bit of spectrum available. In this light, this paper presents the results of an extensive measurement campaign in two iron-ore open-pit mining complexes, at the 700 MHz and 2.6 GHz...... for the future wireless network design, simulation and performance evaluation. The results show that, in order to comply with ultra-reliable communications (URC) availability requirements, larger shadowing margins will have to be considered in the network planning in open-pit mines, when compared to traditional...

  15. Mining planing introduction

    International Nuclear Information System (INIS)

    Toledo, R.D.

    1985-01-01

    Basic concepts concerning mining parameters, plan establishment and typical procedure methods applied throughout the physical execution of mining operations are here determined, analyzed and discussed. Technological and economic aspects of the exploration phase are presented as well as general mathematical and statistical methods for estimating, analyzing and representing mineral deposits which are virtually essential for good mining project execution. The characterization of important mineral substances and the basic parameters of mining works are emphasized in conjunction with long, medium and short term mining planning. Finally, geological modelling, ore reserves calculations and final economic evaluations are considered using a hypothetical example in order to consolidate the main elaborated ideas. (D.J.M.) [pt

  16. Gold-Mining

    DEFF Research Database (Denmark)

    Raaballe, J.; Grundy, B.D.

    2002-01-01

      Based on standard option pricing arguments and assumptions (including no convenience yield and sustainable property rights), we will not observe operating gold mines. We find that asymmetric information on the reserves in the gold mine is a necessary and sufficient condition for the existence...... of operating gold mines. Asymmetric information on the reserves in the mine implies that, at a high enough price of gold, the manager of high type finds the extraction value of the company to be higher than the current market value of the non-operating gold mine. Due to this under valuation the maxim of market...

  17. Data mining in radiology

    International Nuclear Information System (INIS)

    Kharat, Amit T; Singh, Amarjit; Kulkarni, Vilas M; Shah, Digish

    2014-01-01

    Data mining facilitates the study of radiology data in various dimensions. It converts large patient image and text datasets into useful information that helps in improving patient care and provides informative reports. Data mining technology analyzes data within the Radiology Information System and Hospital Information System using specialized software which assesses relationships and agreement in available information. By using similar data analysis tools, radiologists can make informed decisions and predict the future outcome of a particular imaging finding. Data, information and knowledge are the components of data mining. Classes, Clusters, Associations, Sequential patterns, Classification, Prediction and Decision tree are the various types of data mining. Data mining has the potential to make delivery of health care affordable and ensure that the best imaging practices are followed. It is a tool for academic research. Data mining is considered to be ethically neutral, however concerns regarding privacy and legality exists which need to be addressed to ensure success of data mining

  18. System Reliability Engineering

    International Nuclear Information System (INIS)

    Lim, Tae Jin

    2005-02-01

    This book tells of reliability engineering, which includes quality and reliability, reliability data, importance of reliability engineering, reliability and measure, the poisson process like goodness of fit test and the poisson arrival model, reliability estimation like exponential distribution, reliability of systems, availability, preventive maintenance such as replacement policies, minimal repair policy, shock models, spares, group maintenance and periodic inspection, analysis of common cause failure, and analysis model of repair effect.

  19. Occupational respiratory diseases in the South African mining industry.

    Science.gov (United States)

    Nelson, Gill

    2013-01-24

    Crystalline silica and asbestos are common minerals that occur throughout South Africa, exposure to either causes respiratory disease. Most studies on silicosis in South Africa have been cross-sectional and long-term trends have not been reported. Although much research has been conducted on the health effects of silica dust and asbestos fibre in the gold-mining and asbestos-mining sectors, little is known about their health effects in other mining sectors. The aims of this thesis were to describe silicosis trends in gold miners over three decades, and to explore the potential for diamond mine workers to develop asbestos-related diseases and platinum mine workers to develop silicosis. Mine workers for the three sub-studies were identified from a mine worker autopsy database at the National Institute for Occupational Health. From 1975 to 2007, the proportions of white and black gold mine workers with silicosis increased from 18 to 22% and from 3 to 32% respectively. Cases of diamond and platinum mine workers with asbestos-related diseases and silicosis, respectively, were also identified. The trends in silicosis in gold miners at autopsy clearly demonstrate the failure of the gold mines to adequately control dust and prevent occupational respiratory disease. The two case series of diamond and platinum mine workers contribute to the evidence for the risk of asbestos-related diseases in diamond mine workers and silicosis in platinum mine workers, respectively. The absence of reliable environmental dust measurements and incomplete work history records impedes occupational health research in South Africa because it is difficult to identify and/or validate sources of dust exposure that may be associated with occupational respiratory disease.

  20. Occupational respiratory diseases in the South African mining industry

    Directory of Open Access Journals (Sweden)

    Gill Nelson

    2013-01-01

    Full Text Available Background: Crystalline silica and asbestos are common minerals that occur throughout South Africa, exposure to either causes respiratory disease. Most studies on silicosis in South Africa have been cross-sectional and long-term trends have not been reported. Although much research has been conducted on the health effects of silica dust and asbestos fibre in the gold-mining and asbestos-mining sectors, little is known about their health effects in other mining sectors. Objective: The aims of this thesis were to describe silicosis trends in gold miners over three decades, and to explore the potential for diamond mine workers to develop asbestos-related diseases and platinum mine workers to develop silicosis. Methods: Mine workers for the three sub-studies were identified from a mine worker autopsy database at the National Institute for Occupational Health. Results: From 1975 to 2007, the proportions of white and black gold mine workers with silicosis increased from 18 to 22% and from 3 to 32% respectively. Cases of diamond and platinum mine workers with asbestos-related diseases and silicosis, respectively, were also identified. Conclusion: The trends in silicosis in gold miners at autopsy clearly demonstrate the failure of the gold mines to adequately control dust and prevent occupational respiratory disease. The two case series of diamond and platinum mine workers contribute to the evidence for the risk of asbestos-related diseases in diamond mine workers and silicosis in platinum mine workers, respectively. The absence of reliable environmental dust measurements and incomplete work history records impedes occupational health research in South Africa because it is difficult to identify and/or validate sources of dust exposure that may be associated with occupational respiratory disease.

  1. Economics of mine water treatment

    OpenAIRE

    Dvořáček, Jaroslav; Vidlář, Jiří; Štěrba, Jiří; Heviánková, Silvie; Vaněk, Michal; Barták, Pavel

    2012-01-01

    Mine water poses a significant problem in lignite coal mining. The drainage of mine water is the fundamental prerequisite of mining operations. Under the legislation of the Czech Republic, mine water that discharges into surface watercourse is subject to the permission of the state administration body in the water management sector. The permission also stipulates the limits for mine water pollution. Therefore, mine water has to be purified prior to discharge. Although all...

  2. Data mining, mining data : energy consumption modelling

    Energy Technology Data Exchange (ETDEWEB)

    Dessureault, S. [Arizona Univ., Tucson, AZ (United States)

    2007-09-15

    Most modern mining operations are accumulating large amounts of data on production and business processes. Data, however, provides value only if it can be translated into information that appropriate users can utilize. This paper emphasized that a new technological focus should emerge, notably how to concentrate data into information; analyze information sufficiently to become knowledge; and, act on that knowledge. Researchers at the Mining Information Systems and Operations Management (MISOM) laboratory at the University of Arizona have created a method to transform data into action. The data-to-action approach was exercised in the development of an energy consumption model (ECM), in partnership with a major US-based copper mining company, 2 software companies, and the MISOM laboratory. The approach begins by integrating several key data sources using data warehousing techniques, and increasing the existing level of integration and data cleaning. An online analytical processing (OLAP) cube was also created to investigate the data and identify a subset of several million records. Data mining algorithms were applied using the information that was isolated by the OLAP cube. The data mining results showed that traditional cost drivers of energy consumption are poor predictors. A comparison was made between traditional methods of predicting energy consumption and the prediction formed using data mining. Traditionally, in the mines for which data were available, monthly averages of tons and distance are used to predict diesel fuel consumption. However, this article showed that new information technology can be used to incorporate many more variables into the budgeting process, resulting in more accurate predictions. The ECM helped mine planners improve the prediction of energy use through more data integration, measure development, and workflow analysis. 5 refs., 11 figs.

  3. Collaborative Data Mining

    Science.gov (United States)

    Moyle, Steve

    Collaborative Data Mining is a setting where the Data Mining effort is distributed to multiple collaborating agents - human or software. The objective of the collaborative Data Mining effort is to produce solutions to the tackled Data Mining problem which are considered better by some metric, with respect to those solutions that would have been achieved by individual, non-collaborating agents. The solutions require evaluation, comparison, and approaches for combination. Collaboration requires communication, and implies some form of community. The human form of collaboration is a social task. Organizing communities in an effective manner is non-trivial and often requires well defined roles and processes. Data Mining, too, benefits from a standard process. This chapter explores the standard Data Mining process CRISP-DM utilized in a collaborative setting.

  4. Coal mine site reclamation

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2013-02-15

    Coal mine sites can have significant effects on local environments. In addition to the physical disruption of land forms and ecosystems, mining can also leave behind a legacy of secondary detrimental effects due to leaching of acid and trace elements from discarded materials. This report looks at the remediation of both deep mine and opencast mine sites, covering reclamation methods, back-filling issues, drainage and restoration. Examples of national variations in the applicable legislation and in the definition of rehabilitation are compared. Ultimately, mine site rehabilitation should return sites to conditions where land forms, soils, hydrology, and flora and fauna are self-sustaining and compatible with surrounding land uses. Case studies are given to show what can be achieved and how some landscapes can actually be improved as a result of mining activity.

  5. Treating mine water

    Energy Technology Data Exchange (ETDEWEB)

    Matlak, E S; Kochegarova, L V; Zaslavskaya, I Yu

    1980-10-01

    Taking into account the negative influence of mine waters with suspended matter on the natural environment on the surface, the maximum treatment of mine water underground, is proposed. It is noted that full treatment of mine water, using conventional filtration methods, would be rather expensive, but a limited treatment of mine water is possible. Such treated mine water can be used in dust suppression and fire fighting systems. Mine water treated underground should be free of any odor, with pH level ranging from 6 to 9.5, with suspended matter content not exceeding 50 mg/l and coli-titre not less than 300 cm$SUP$3. It is suggested that water treatment to produce water characterized by these parameters is possible and economical. Recommendations on construction of underground sedimentation tanks and channels, and a hydraulic system of cleaning sedimentation tanks are proposed. The settling would be stored underground in abandoned workings. (2 refs.) (In Russian)

  6. Nucleonic gauges in the Australian mining and exploration industries

    International Nuclear Information System (INIS)

    Charbucinski, J.

    2000-01-01

    On-line and in-situ nucleonic analysis systems have found widespread application in the Australian metalliferous mineral and coal industries. The rapid and reliable response of these systems has led to improved exploration and better control of mining and mineral processing. This paper reviews both types of nucleonic control system (on-line and in-situ) available in Australian exploration and mining market. (author)

  7. Electric power supply for a mine: Principles and examples

    International Nuclear Information System (INIS)

    Mienville, G.; Grellety, J.

    1990-01-01

    The power supply of a water pumping system at the PEN or RAN mine is studied. A reliable pumping system was required because of the small volume of the available drainage reservoirs. Different power supply systems are considered. The 20 RV system configuration and adapted safety devices are described. The use of a generating set was required to ensure the mine operations. The power supply system in use allowed a reduction of the electricity cost [fr

  8. Treatment of mine-water from decommissioning uranium mines

    International Nuclear Information System (INIS)

    Fan Quanhui

    2002-01-01

    Treatment methods for mine-water from decommissioning uranium mines are introduced and classified. The suggestions on optimal treatment methods are presented as a matter of experience with decommissioned Chenzhou Uranium Mine

  9. Implementation of Paste Backfill Mining Technology in Chinese Coal Mines

    Science.gov (United States)

    Chang, Qingliang; Zhou, Huaqiang; Bai, Jianbiao

    2014-01-01

    Implementation of clean mining technology at coal mines is crucial to protect the environment and maintain balance among energy resources, consumption, and ecology. After reviewing present coal clean mining technology, we introduce the technology principles and technological process of paste backfill mining in coal mines and discuss the components and features of backfill materials, the constitution of the backfill system, and the backfill process. Specific implementation of this technology and its application are analyzed for paste backfill mining in Daizhuang Coal Mine; a practical implementation shows that paste backfill mining can improve the safety and excavation rate of coal mining, which can effectively resolve surface subsidence problems caused by underground mining activities, by utilizing solid waste such as coal gangues as a resource. Therefore, paste backfill mining is an effective clean coal mining technology, which has widespread application. PMID:25258737

  10. A mine of energy

    International Nuclear Information System (INIS)

    Fallon, M.

    1982-01-01

    In July 1978 the then Union Corporation (which is a wholly-owned Subsidiary of the larger Gencor Group) announced its intention to develop Beisa mine in the Orange Free State. They started up a medium sized uranium mine with gold as a by-product. The main idea was for the processing of uranium. The planning of the uranium recovery plant, the actual mining, and the recovery and extraction of uranium are discussed

  11. Uranium mining in Saskatchewan

    International Nuclear Information System (INIS)

    Scales, M.

    2006-01-01

    The mines of northern Saskatchewan make Canada the worlds leading uranium producer in Canada supplied 29% of global demand, or 11.60 million tonnes of the metal in 2004. Here are two bright ideas - how to mine an orebody by neither pit nor underground method, and how to mine high-grade ore without miners - that Cogema and Cameco are pursuing in the Athabasca Basin

  12. Towards Rare Itemset Mining

    OpenAIRE

    Szathmary , Laszlo; Napoli , Amedeo; Valtchev , Petko

    2007-01-01

    site de la conférence : http://ictai07.ceid.upatras.gr/; International audience; We describe here a general approach for rare itemset mining. While mining literature has been almost exclusively focused on frequent itemsets, in many practical situations rare ones are of higher interest (e.g., in medical databases, rare combinations of symptoms might provide useful insights for the physicians). Based on an examination of the relevant substructures of the mining space, our approach splits the ra...

  13. AMSAA Reliability Growth Guide

    National Research Council Canada - National Science Library

    Broemm, William

    2000-01-01

    ... has developed reliability growth methodology for all phases of the process, from planning to tracking to projection. The report presents this methodology and associated reliability growth concepts.

  14. Partnership in mining

    Energy Technology Data Exchange (ETDEWEB)

    Haslam, R

    1988-04-01

    This paper discusses the benefits resulting from mutual cooperation and information exchange between the UK and USA coal industries. The aim of this cooperation is to promote safe and efficient extraction and profitable use of coal. Advanced mining technologies and mechanisation of the coal mines are some of the results of research cooperation between British Coal and the US Bureau of Mines. In addition, Britain has studied and put into good use the management styles, working practices and pay structure, and mining engineering adopted in the USA.

  15. Solution mining economics

    International Nuclear Information System (INIS)

    Hunkin, G.G.

    1980-01-01

    The field of application of in-situ solution mining of uranium is described and areas of competition with open pit and underground mining identified. The influence of high interest rates and dollar inflation on present values and rate of return is shown to be minimized by low capitalization and short construction lead times typical of in-situ leaching ventures. A scheme of three major project account divisions is presented and basic parameters necessary for mine planning are listed. 1979 cost ranges and useful methods of estimation of capital and operating costs are given for the in-situ uranium mining method

  16. Mining face equipment

    Energy Technology Data Exchange (ETDEWEB)

    G, Litvinskiy G; Babyuk, G V; Yakovenko, V A

    1981-01-07

    Mining face equipment includes drilling advance wells, drilling using explosives on the contour bore holes, loading and transporting the crushed mass, drilling reinforcement shafts, injecting reinforcement compounds and moving the timber. Camouflet explosives are used to form relaxed rock stress beyond the mining area to decrease costs of reinforcing the mining area by using nonstressed rock in the advance well as support. The strengthening solution is injected through advanced cementing wells before drilling the contour bores as well as through radial cementing wells beyond the timbers following loading and transport of the mining debris. The advance well is 50-80 m.

  17. The mines of Jackymov

    International Nuclear Information System (INIS)

    Ramsey, L.J.

    1985-01-01

    The history of the mines in the vicinity of Jackymov, a small town in Central Europe is given. These mines have been worked for several hundred years and from them has been brought forth a variety of products including silver, uranium and radium, the latter being isolated from Jackymov pitch-blende and identified by Marie Curie. The health effects of the miners mining radioactive ores are briefly discussed. The development of Jackymov as a spa resort using the mine water containing radium is also described. (U.K.)

  18. Uranium mining and milling

    International Nuclear Information System (INIS)

    Floeter, W.

    1976-01-01

    In this report uranium mining and milling are reviewed. The fuel cycle, different types of uranium geological deposits, blending of ores, open cast and underground mining, the mining cost and radiation protection in mines are treated in the first part of this report. In the second part, the milling of uranium ores is treated, including process technology, acid and alkaline leaching, process design for physical and chemical treatment of the ores, and the cost. Each chapter is clarified by added figures, diagrams, tables, and flowsheets. (HK) [de

  19. Mine ventilation engineering

    Energy Technology Data Exchange (ETDEWEB)

    Hall, C.J.

    1981-01-01

    This book on mine ventilation covers psychometrics, airflow through roadways and ducts, natural ventilation, fans, instruments, ventilation surveys, auxiliary ventilation, air quality, and planning and economics.

  20. Responsible Mining: A Human Resources Strategy for Mine Development Project

    OpenAIRE

    Sampathkumar, Sriram (Ram)

    2012-01-01

    Mining is a global industry. Most mining companies operate internationally, often in remote, challenging environments and consequently frequently have respond to unusual and demanding Human Resource (HR) requirements. It is my opinion that the strategic imperative behind success in mining industry is responsible mining. The purpose of this paper is to examine how an effective HR strategy can be a competitive advantage that contributes to the success of a mining project in the global mining in...

  1. Mining engineer requirements in a German coal mine

    Energy Technology Data Exchange (ETDEWEB)

    Rauhut, F J

    1985-10-01

    Basic developments in German coal mines, new definitions of working areas of mining engineers, and groups of requirements in education are discussed. These groups include: requirements of hard-coal mining at great depth and in extended collieries; application of process technology and information systems in semi-automated mines; thinking in processes and systems; organizational changes; future requirements of mining engineers; responsibility of the mining engineer for employees and society.

  2. Towards educational data mining: Using data mining methods for automated chat analysis to understand and support inquiry learning processes

    OpenAIRE

    Anjewierden , Anjo; Kolloffel , Bas; Hulshof , Casper

    2007-01-01

    In this paper we investigate the application of data mining methods to provide learners with real-time adaptive feedback on the nature and patterns of their on-line communication while learning collaboratively.We derived two models for classifying chat messages using data mining techniques and tested these on an actual data set [16]. The reliability of the classification of chat messages is established by comparing the models performance to that of humans. Results indicate that the classifica...

  3. Improvements in electric power supply in coal mines

    Energy Technology Data Exchange (ETDEWEB)

    Minovskii, Yu.P.; Nabokov, Eh.P.; Savel' ev, G.P.

    1985-01-01

    Reviews measures taken by major coal producing countries to increase output levels. Discusses research carried out into advance design of equipment in FRG, UK, USA and France and proposes establishment of central automatic control of electric power supply system in Soviet mines, improvement in underground power supply equipment, increase in reliability, stabilization of standby capacity in low voltage circuits, maintenance-free electrical equipment, and efficient spare part storage in underground workings. States that introduction of the proposed system (details are given) will ensure that Soviet mines will eventually reach the development level of foreign mines. 2 refs.

  4. Sustainable Mining Environment: Technical Review of Post-mining Plans

    Directory of Open Access Journals (Sweden)

    Restu Juniah

    2017-12-01

    Full Text Available The mining industry exists because humans need mining commodities to meet their daily needs such as motor vehicles, mobile phones, electronic equipment and others. Mining commodities as mentioned in Government Regulation No. 23 of 2010 on Implementation of Mineral and Coal Mining Business Activities are radioactive minerals, metal minerals, nonmetallic minerals, rocks and coal. Mineral and coal mining is conducted to obtain the mining commodities through production operations. Mining and coal mining companies have an obligation to ensure that the mining environment in particular after the post production operation or post mining continues. The survey research aims to examine technically the post-mining plan in coal mining of PT Samantaka Batubara in Indragiri Hulu Regency of Riau Province towards the sustainability of the mining environment. The results indicate that the post-mining plan of PT Samantaka Batubara has met the technical aspects required in post mining planning for a sustainable mining environment. Postponement of post-mining land of PT Samantaka Batubara for garden and forest zone. The results of this study are expected to be useful and can be used by stakeholders, academics, researchers, practitioners and associations of mining, and the environment.

  5. A reliability simulation language for reliability analysis

    International Nuclear Information System (INIS)

    Deans, N.D.; Miller, A.J.; Mann, D.P.

    1986-01-01

    The results of work being undertaken to develop a Reliability Description Language (RDL) which will enable reliability analysts to describe complex reliability problems in a simple, clear and unambiguous way are described. Component and system features can be stated in a formal manner and subsequently used, along with control statements to form a structured program. The program can be compiled and executed on a general-purpose computer or special-purpose simulator. (DG)

  6. The application of the analytic hierarchy process (AHP) in uranium mine mining method of the optimal selection

    International Nuclear Information System (INIS)

    Tan Zhongyin; Kuang Zhengping; Qiu Huiyuan

    2014-01-01

    Analytic hierarchy process, AHP, is a combination of qualitative and quantitative, systematic and hierarchical analysis method. Basic decision theory of analytic hierarchy process is applied in this article, with a project example in north Guangdong region as the research object, the in-situ mining method optimization choose hierarchical analysis model is established and the analysis method, The results show that, the AHP model for mining method selecting model was reliable, optimization results were conformity with the actual use of the in-situ mining method, and it has better practicability. (authors)

  7. Mining robotics sensors

    CSIR Research Space (South Africa)

    Green, JJ

    2012-04-01

    Full Text Available of threedimensional cameras (SR 4000 and XBOX Kinect) and a thermal imaging sensor (FLIR A300) in order to create 3d thermal models of narrow mining stopes. This information can be used in determining the risk of rockfall in an underground mine, which is a major...

  8. Cementitious backfill in mining

    Energy Technology Data Exchange (ETDEWEB)

    Taute, A; Spice, J; Wingrove, A C [Van Niekerk, Kleyn Edwards (South Africa)

    1993-03-01

    This article describes the need for increased usage of backfill material in mining and presents some of the considerations for use of cemented materials. Laboratory test results obtained using a variety of cementitious binders and mine tailings are presented. 3 figs., 1 tab.

  9. Mining Department computer systems

    Energy Technology Data Exchange (ETDEWEB)

    1979-09-01

    Describes the main computer systems currently available, or being developed by the Mining Department of the UK National Coal Board. They are primarily for the use of mining and specialist engineers, but some of them have wider applications, particularly in the research and development and management statistics fields.

  10. Genetic process mining

    NARCIS (Netherlands)

    Aalst, van der W.M.P.; Alves De Medeiros, A.K.; Weijters, A.J.M.M.; Ciardo, G.; Darondeau, P.

    2005-01-01

    The topic of process mining has attracted the attention of both researchers and tool vendors in the Business Process Management (BPM) space. The goal of process mining is to discover process models from event logs, i.e., events logged by some information system are used to extract information about

  11. Ghana - Mining and Development

    OpenAIRE

    Mohan, P.C.

    2004-01-01

    The objectives of the project ($9.37 million, 1996-2001) were to (a) enhance the capacity of the mining sector institutions to carry out their functions of encouraging and regulating investments in the mining sector in an environmentally sound manner and (b) support the use of techniques and mechanisms that will improve productivity, financial viability and reduce the environmental impact of ...

  12. Northeast Church Rock Mine

    Science.gov (United States)

    Northeast Church Rock Mine, a former uranium mine 17 miles northeast of Gallup, NM in the Pinedale Chapter of the Navajo Nation. EPA is working with NNEPA to oversee cleanup work by United Nuclear Corporation, a company owned by General Electric (GE).

  13. Distributed genetic process mining

    NARCIS (Netherlands)

    Bratosin, C.C.; Sidorova, N.; Aalst, van der W.M.P.

    2010-01-01

    Process mining aims at discovering process models from data logs in order to offer insight into the real use of information systems. Most of the existing process mining algorithms fail to discover complex constructs or have problems dealing with noise and infrequent behavior. The genetic process

  14. Data mining for service

    CERN Document Server

    2014-01-01

    Virtually all nontrivial and modern service related problems and systems involve data volumes and types that clearly fall into what is presently meant as "big data", that is, are huge, heterogeneous, complex, distributed, etc. Data mining is a series of processes which include collecting and accumulating data, modeling phenomena, and discovering new information, and it is one of the most important steps to scientific analysis of the processes of services.  Data mining application in services requires a thorough understanding of the characteristics of each service and knowledge of the compatibility of data mining technology within each particular service, rather than knowledge only in calculation speed and prediction accuracy. Varied examples of services provided in this book will help readers understand the relation between services and data mining technology. This book is intended to stimulate interest among researchers and practitioners in the relation between data mining technology and its application to ...

  15. African mining '91

    International Nuclear Information System (INIS)

    1991-01-01

    The second 'African Mining' conference was held in June 1991, and followed the first event held in May 1987. That full four-year period was characterized by substantial changes in the political and economic climate of many countries in both hemispheres. The results of many of these changing facets of our industry are described in the papers in African Mining'91. Many of the papers deal with advances in technology, which is the main reason for the meeting. There are 37 papers under the headings general, mining, metallurgy and geology and exploration. Most papers are concerned with gold, copper and mineral mining. One paper concerning uranium mining operations in Namibia is indexed separately. (author)

  16. Radioecological challenges for mining

    Energy Technology Data Exchange (ETDEWEB)

    Vesterbacka, P.; Ikaeheimonen, T.K.; Solatie, D. [Radiation and Nuclear Safety Authority (Finland)

    2014-07-01

    In Finland, mining became popular in the mid-1990's when the mining amendments to the law made the mining activities easier for foreign companies. Also the price of the minerals rose and mining in Finland became economically profitable. Expanding mining industry brought new challenges to radiation safety aspect since radioactive substances occur in nearly all minerals. In Finnish soil and bedrock the average crystal abundance of uranium and thorium are 2.8 ppm and 10 ppm, respectively. It cannot be predicted beforehand how radionuclides behave in the mining processes which why they need to be taken into account in mining activities. Radiation and Nuclear Safety Authority (STUK) has given a national guide ST 12.1 based on the Finnish Radiation Act. The guide sets the limits for radiation doses to the public also from mining activities. In general, no measures to limit the radiation exposure are needed, if the dose from the operation liable to cause exposure to natural radiation is no greater than 0.1 mSv per year above the natural background radiation dose. If the exposure of the public may be higher than 0.1 mSv per year, the responsible party must provide STUK a plan describing the measures by which the radiation exposure is to be kept as low as is reasonably achievable. In that case the mining company responsible company has to make a radiological baseline study. The baseline study must focus on the environment that the mining activities may impact. The study describes the occurrence of natural radioactivity in the environment before any mining activities are started. The baseline study lasts usually for two to three years in natural circumstances. Based on the baseline study measurements, detailed information of the existing levels of radioactivity in the environment can be attained. Once the mining activities begin, it is important that the limits are set for the wastewater discharges to the environment and environmental surveillance in the vicinity of

  17. Reliability data banks

    International Nuclear Information System (INIS)

    Cannon, A.G.; Bendell, A.

    1991-01-01

    Following an introductory chapter on Reliability, what is it, why it is needed, how it is achieved and measured, the principles of reliability data bases and analysis methodologies are the subject of the next two chapters. Achievements due to the development of data banks are mentioned for different industries in the next chapter, FACTS, a comprehensive information system for industrial safety and reliability data collection in process plants are covered next. CREDO, the Central Reliability Data Organization is described in the next chapter and is indexed separately, as is the chapter on DANTE, the fabrication reliability Data analysis system. Reliability data banks at Electricite de France and IAEA's experience in compiling a generic component reliability data base are also separately indexed. The European reliability data system, ERDS, and the development of a large data bank come next. The last three chapters look at 'Reliability data banks, - friend foe or a waste of time'? and future developments. (UK)

  18. Suncor maintenance and reliability

    Energy Technology Data Exchange (ETDEWEB)

    Little, S. [Suncor Energy, Calgary, AB (Canada)

    2006-07-01

    Fleet maintenance and reliability at Suncor Energy was discussed in this presentation, with reference to Suncor Energy's primary and support equipment fleets. This paper also discussed Suncor Energy's maintenance and reliability standard involving people, processes and technology. An organizational maturity chart that graphed organizational learning against organizational performance was illustrated. The presentation also reviewed the maintenance and reliability framework; maintenance reliability model; the process overview of the maintenance and reliability standard; a process flow chart of maintenance strategies and programs; and an asset reliability improvement process flow chart. An example of an improvement initiative was included, with reference to a shovel reliability review; a dipper trip reliability investigation; bucket related failures by type and frequency; root cause analysis of the reliability process; and additional actions taken. Last, the presentation provided a graph of the results of the improvement initiative and presented the key lessons learned. tabs., figs.

  19. Ideate about building green mine of uranium mining and metallurgy

    International Nuclear Information System (INIS)

    Shi Zuyuan

    2012-01-01

    Analysing the current situation of uranium mining and metallurgy; Setting up goals for green uranium mining and metallurgy, its fundamental conditions, Contents and measures. Putting forward an idea to combine green uranium mining and metallurgy with the state target for green mining, and keeping its own characteristics. (author)

  20. Mining and mining authorities in Saarland 2016. Mining economy, mining technology, occupational safety, environmental protection, statistics, mining authority activities. Annual report

    International Nuclear Information System (INIS)

    2016-01-01

    The annual report of the Saarland Upper Mining Authority provides an insight into the activities of mining authorities. Especially, the development of the black coal mining, safety and technology of mining as well as the correlation between mining and environment are stressed.

  1. The Accelerator Reliability Forum

    CERN Document Server

    Lüdeke, Andreas; Giachino, R

    2014-01-01

    A high reliability is a very important goal for most particle accelerators. The biennial Accelerator Reliability Workshop covers topics related to the design and operation of particle accelerators with a high reliability. In order to optimize the over-all reliability of an accelerator one needs to gather information on the reliability of many different subsystems. While a biennial workshop can serve as a platform for the exchange of such information, the authors aimed to provide a further channel to allow for a more timely communication: the Particle Accelerator Reliability Forum [1]. This contribution will describe the forum and advertise it’s usage in the community.

  2. Mining toward the year 2000

    International Nuclear Information System (INIS)

    Anon.

    1981-01-01

    Mining in South Africa to this present day has not been a case of dramatic development, rather a steady technical progress, assisted by a rising product market price. Prominent men in the mining industry look at the future in terms of that logical development. Coverage is given to gold, mine unionization, coal, rock bursts, ventilation, uranium and ocean mining

  3. Open pit mining of uranium

    International Nuclear Information System (INIS)

    Wood, J.T.

    1977-01-01

    The Jackpile--Paquate Mines of the Anaconda Company are on the Laguna Indian Reservation midway between Grants and Albuquerque, New Mexico. The open pit mining of uranium ore at those mines is conducted in three separate operations (stripping, mining, and ore haul)

  4. Australian uranium mining policy

    International Nuclear Information System (INIS)

    Fisk, B.

    1985-01-01

    Australian government policy is explained in terms of adherence to the Non-Proliferation Treaty. Two alleged uncertainties are discussed: the future of Australian mining industry as a whole -on which it is said that Australian uranium mines will continue to be developed; and detailed commercial policy of the Australian government - on which it is suggested that the three-mines policy of limited expansion of the industry would continue. Various aspects of policy, applying the principles of the NPT, are listed. (U.K.)

  5. Mining on the Mesa

    Energy Technology Data Exchange (ETDEWEB)

    Sprouls, M.W.

    1994-10-01

    Peabody Western Coal Co. is the owner of Black Mesa and Kayenta coal opencast mines, both sited on Hopi and Navajo lands. 93% of the employees are native American, mostly Navajo. Kayenta is the larger and extracts coal with draglines. Sulphur content is high so the coal has to be analyzed and carefully blended before use. Black Mesa also uses draglines, here quality control is not as important as it is at Kayenta. Coal is transported to power stations using slurry pipelines. Both mines are heavily involved in land reclamation, leaving a landscape that makes better grazing than it did before mining. 2 figs.

  6. Human Reliability Program Overview

    Energy Technology Data Exchange (ETDEWEB)

    Bodin, Michael

    2012-09-25

    This presentation covers the high points of the Human Reliability Program, including certification/decertification, critical positions, due process, organizational structure, program components, personnel security, an overview of the US DOE reliability program, retirees and academia, and security program integration.

  7. Power electronics reliability analysis.

    Energy Technology Data Exchange (ETDEWEB)

    Smith, Mark A.; Atcitty, Stanley

    2009-12-01

    This report provides the DOE and industry with a general process for analyzing power electronics reliability. The analysis can help with understanding the main causes of failures, downtime, and cost and how to reduce them. One approach is to collect field maintenance data and use it directly to calculate reliability metrics related to each cause. Another approach is to model the functional structure of the equipment using a fault tree to derive system reliability from component reliability. Analysis of a fictitious device demonstrates the latter process. Optimization can use the resulting baseline model to decide how to improve reliability and/or lower costs. It is recommended that both electric utilities and equipment manufacturers make provisions to collect and share data in order to lay the groundwork for improving reliability into the future. Reliability analysis helps guide reliability improvements in hardware and software technology including condition monitoring and prognostics and health management.

  8. Reliability of software

    International Nuclear Information System (INIS)

    Kopetz, H.

    1980-01-01

    Common factors and differences in the reliability of hardware and software; reliability increase by means of methods of software redundancy. Maintenance of software for long term operating behavior. (HP) [de

  9. Reliable Design Versus Trust

    Science.gov (United States)

    Berg, Melanie; LaBel, Kenneth A.

    2016-01-01

    This presentation focuses on reliability and trust for the users portion of the FPGA design flow. It is assumed that the manufacturer prior to hand-off to the user tests FPGA internal components. The objective is to present the challenges of creating reliable and trusted designs. The following will be addressed: What makes a design vulnerable to functional flaws (reliability) or attackers (trust)? What are the challenges for verifying a reliable design versus a trusted design?

  10. Pocket Handbook on Reliability

    Science.gov (United States)

    1975-09-01

    exponencial distributions Weibull distribution, -xtimating reliability, confidence intervals, relia- bility growth, 0. P- curves, Bayesian analysis. 20 A S...introduction for those not familiar with reliability and a good refresher for those who are currently working in the area. LEWIS NERI, CHIEF...includes one or both of the following objectives: a) prediction of the current system reliability, b) projection on the system reliability for someI future

  11. Selection of mining method for No.3 uranium ore body in the independent mining area at a uranium mine

    International Nuclear Information System (INIS)

    Ding Fulong; Ding Dexin; Ye Yongjun

    2010-01-01

    Mining operation in the existed mining area at a uranium mine is near completion and it is necessary to mine the No.3 uranium ore body in another mining area at the mine. This paper, based on the geological conditions, used analogical method for analyzing the feasible methods and the low cost and high efficiency mining method was suggested for the No.3 ore body in the independent mining area at the uranium mine. (authors)

  12. Principles of Bridge Reliability

    DEFF Research Database (Denmark)

    Thoft-Christensen, Palle; Nowak, Andrzej S.

    The paper gives a brief introduction to the basic principles of structural reliability theory and its application to bridge engineering. Fundamental concepts like failure probability and reliability index are introduced. Ultimate as well as serviceability limit states for bridges are formulated......, and as an example the reliability profile and a sensitivity analyses for a corroded reinforced concrete bridge is shown....

  13. Reliability in engineering '87

    International Nuclear Information System (INIS)

    Tuma, M.

    1987-01-01

    The participants heard 51 papers dealing with the reliability of engineering products. Two of the papers were incorporated in INIS, namely ''Reliability comparison of two designs of low pressure regeneration of the 1000 MW unit at the Temelin nuclear power plant'' and ''Use of probability analysis of reliability in designing nuclear power facilities.''(J.B.)

  14. Security Measures in Data Mining

    OpenAIRE

    Anish Gupta; Vimal Bibhu; Rashid Hussain

    2012-01-01

    Data mining is a technique to dig the data from the large databases for analysis and executive decision making. Security aspect is one of the measure requirement for data mining applications. In this paper we present security requirement measures for the data mining. We summarize the requirements of security for data mining in tabular format. The summarization is performed by the requirements with different aspects of security measure of data mining. The performances and outcomes are determin...

  15. Slope stability radar for monitoring mine walls

    Science.gov (United States)

    Reeves, Bryan; Noon, David A.; Stickley, Glen F.; Longstaff, Dennis

    2001-11-01

    Determining slope stability in a mining operation is an important task. This is especially true when the mine workings are close to a potentially unstable slope. A common technique to determine slope stability is to monitor the small precursory movements, which occur prior to collapse. The slope stability radar has been developed to remotely scan a rock slope to continuously monitor the spatial deformation of the face. Using differential radar interferometry, the system can detect deformation movements of a rough wall with sub-millimeter accuracy, and with high spatial and temporal resolution. The effects of atmospheric variations and spurious signals can be reduced via signal processing means. The advantage of radar over other monitoring techniques is that it provides full area coverage without the need for mounted reflectors or equipment on the wall. In addition, the radar waves adequately penetrate through rain, dust and smoke to give reliable measurements, twenty-four hours a day. The system has been trialed at three open-cut coal mines in Australia, which demonstrated the potential for real-time monitoring of slope stability during active mining operations.

  16. Geotechnical characterization of mined clay from Appalachian Ohio: challenges and implications for the clay mining industry.

    Science.gov (United States)

    Moran, Anthony R; Hettiarachchi, Hiroshan

    2011-07-01

    Clayey soil found in coal mines in Appalachian Ohio is often sold to landfills for constructing Recompacted Soil Liners (RSL) in landfills. Since clayey soils possess low hydraulic conductivity, the suitability of mined clay for RSL in Ohio is first assessed by determining its clay content. When soil samples are tested in a laboratory, the same engineering properties are typically expected for the soils originated from the same source, provided that the testing techniques applied are standard, but mined clay from Appalachian Ohio has shown drastic differences in particle size distribution depending on the sampling and/or laboratory processing methods. Sometimes more than a 10 percent decrease in the clay content is observed in the samples collected at the stockpiles, compared to those collected through reverse circulation drilling. This discrepancy poses a challenge to geotechnical engineers who work on the prequalification process of RSL material as it can result in misleading estimates of the hydraulic conductivity of the samples. This paper describes a laboratory investigation conducted on mined clay from Appalachian Ohio to determine how and why the standard sampling and/or processing methods can affect the grain-size distributions. The variation in the clay content was determined to be due to heavy concentrations of shale fragments in the clayey soils. It was also concluded that, in order to obtain reliable grain size distributions from the samples collected at a stockpile of mined clay, the material needs to be processed using a soil grinder. Otherwise, the samples should be collected through drilling.

  17. Mining activities at Neyveli

    International Nuclear Information System (INIS)

    Boopathy, P.V.; Rathinavel, R.

    1993-01-01

    Mining activities at lignite areas around Neyveli are described. Measures taken to safeguard the environment from despoliation of land, air pollution, noise pollution and effluents are described. (M.G.B.)

  18. Radiation in mines

    International Nuclear Information System (INIS)

    Rose, H.J.M.

    1982-01-01

    Radiation in mines is primarily associated with, but not restricted to, the exploitation of uranium bearing orebodies. The intent of this chapter is to convey some aspects of radiation control in the mining industry, the behaviour of the parent radon and its daughter products. An attempt was made to demonstrate that anything less than complete diligence by the ventilation personnel could result in rapid deterioration of the mine environment, and consequently high exposure rates. When the maximum annual exposure limit is 4,0 WLM (Working level month exposure) the ventilation official is not allowed the privilege of making an error. Ventilation planning in uranium mines is of prime importance and is very much a group involvement

  19. Pumps in mining

    Energy Technology Data Exchange (ETDEWEB)

    1979-01-01

    This article looks at the pump industry as a whole, its historical links with the mining industry, their parallel develop ment, and at the individual manufacturers and pumps, services and auxillary products they have to offer.

  20. Data mining in agriculture

    CERN Document Server

    Mucherino, Antonio; Pardalos, Panos M

    2009-01-01

    Data Mining in Agriculture represents a comprehensive effort to provide graduate students and researchers with an analytical text on data mining techniques applied to agriculture and environmental related fields. This book presents both theoretical and practical insights with a focus on presenting the context of each data mining technique rather intuitively with ample concrete examples represented graphically and with algorithms written in MATLAB®. Examples and exercises with solutions are provided at the end of each chapter to facilitate the comprehension of the material. For each data mining technique described in the book variants and improvements of the basic algorithm are also given. Also by P.J. Papajorgji and P.M. Pardalos: Advances in Modeling Agricultural Systems, 'Springer Optimization and its Applications' vol. 25, ©2009.

  1. Acid Mine Drainage Treatment

    National Research Council Canada - National Science Library

    Fripp, Jon

    2000-01-01

    .... Acid mine drainage (AMD) can have severe impacts to aquatic resources, can stunt terrestrial plant growth and harm wetlands, contaminate groundwater, raise water treatment costs, and damage concrete and metal structures...

  2. Automatic identification in mining

    Energy Technology Data Exchange (ETDEWEB)

    Puckett, D; Patrick, C [Mine Computers and Electronics Inc., Morehead, KY (United States)

    1998-06-01

    The feasibility of monitoring the locations and vital statistics of equipment and personnel in surface and underground mining operations has increased with advancements in radio frequency identification (RFID) technology. This paper addresses the use of RFID technology, which is relatively new to the mining industry, to track surface equipment in mine pits, loading points and processing facilities. Specific applications are discussed, including both simplified and complex truck tracking systems and an automatic pit ticket system. This paper concludes with a discussion of the future possibilities of using RFID technology in mining including monitoring heart and respiration rates, body temperatures and exertion levels; monitoring repetitious movements for the study of work habits; and logging air quality via personnel sensors. 10 refs., 5 figs.

  3. Uranium mines of Tajikistan

    International Nuclear Information System (INIS)

    Razykov, Z.A; Gusakov, E.G.; Marushenko, A.A.; Botov, A.Yu.; Yunusov, M.M.

    2002-12-01

    The book describes location laws, the main properties of geological structure and industrial perspectives for known uranium mines of the Republic of Tajikistan. Used methods of industrial processing of uranium mines are described. The results of investigations of technological properties of main types of uranium ores and methods of industrial processing of some of them are shown. Main properties of uranium are shortly described as well as problems, connected with it, which arise during exploitation, mining and processing of uranium ores. The main methods of solution of these problems are shown. The book has interest for specialists of mining, geological, chemical, and technological fields as well as for students of appropriate universities. This book will be interested for usual reader, too, if they are interested in mineral resources of their country [ru

  4. Acid mine drainage

    Science.gov (United States)

    Bigham, Jerry M.; Cravotta, Charles A.

    2016-01-01

    Acid mine drainage (AMD) consists of metal-laden solutions produced by the oxidative dissolution of iron sulfide minerals exposed to air, moisture, and acidophilic microbes during the mining of coal and metal deposits. The pH of AMD is usually in the range of 2–6, but mine-impacted waters at circumneutral pH (5–8) are also common. Mine drainage usually contains elevated concentrations of sulfate, iron, aluminum, and other potentially toxic metals leached from rock that hydrolyze and coprecipitate to form rust-colored encrustations or sediments. When AMD is discharged into surface waters or groundwaters, degradation of water quality, injury to aquatic life, and corrosion or encrustation of engineered structures can occur for substantial distances. Prevention and remediation strategies should consider the biogeochemical complexity of the system, the longevity of AMD pollution, the predictive power of geochemical modeling, and the full range of available field technologies for problem mitigation.

  5. Scalable Frequent Subgraph Mining

    KAUST Repository

    Abdelhamid, Ehab

    2017-01-01

    Given an input graph, the Frequent Subgraph Mining (FSM) task finds all subgraphs with frequencies exceeding a given threshold. FSM is crucial for graph analysis, and it is an essential building block in a variety

  6. Ensemble Data Mining Methods

    Data.gov (United States)

    National Aeronautics and Space Administration — Ensemble Data Mining Methods, also known as Committee Methods or Model Combiners, are machine learning methods that leverage the power of multiple models to achieve...

  7. Coal mine subsidence

    International Nuclear Information System (INIS)

    Rahall, N.J.

    1991-05-01

    This paper examines the efficacy of the Department of the Interior's Office of Surface Mining Reclamation and Enforcement's (OSMRE) efforts to implement the federally assisted coal mine subsidence insurance program. Coal mine subsidence, a gradual settling of the earth's surface above an underground mine, can damage nearby land and property. To help protect property owners from subsidence-related damage, the Congress passed legislation in 1984 authorizing OSMRE to make grants of up to $3 million to each state to help the states establish self-sustaining, state-administered insurance programs. Of the 21 eligible states, six Colorado, Indiana, Kentucky, Ohio, West Virginia, and Wyoming applied for grants. This paper reviews the efforts of these six states to develop self-sustaining insurance programs and assessed OSMRE's oversight of those efforts

  8. Data Stream Mining

    Science.gov (United States)

    Gaber, Mohamed Medhat; Zaslavsky, Arkady; Krishnaswamy, Shonali

    Data mining is concerned with the process of computationally extracting hidden knowledge structures represented in models and patterns from large data repositories. It is an interdisciplinary field of study that has its roots in databases, statistics, machine learning, and data visualization. Data mining has emerged as a direct outcome of the data explosion that resulted from the success in database and data warehousing technologies over the past two decades (Fayyad, 1997,Fayyad, 1998,Kantardzic, 2003).

  9. Coal Mines Security System

    OpenAIRE

    Ankita Guhe; Shruti Deshmukh; Bhagyashree Borekar; Apoorva Kailaswar; Milind E.Rane

    2012-01-01

    Geological circumstances of mine seem to be extremely complicated and there are many hidden troubles. Coal is wrongly lifted by the musclemen from coal stocks, coal washeries, coal transfer and loading points and also in the transport routes by malfunctioning the weighing of trucks. CIL —Coal India Ltd is under the control of mafia and a large number of irregularities can be contributed to coal mafia. An Intelligent Coal Mine Security System using data acquisition method utilizes sensor, auto...

  10. Applied data mining

    CERN Document Server

    Xu, Guandong

    2013-01-01

    Data mining has witnessed substantial advances in recent decades. New research questions and practical challenges have arisen from emerging areas and applications within the various fields closely related to human daily life, e.g. social media and social networking. This book aims to bridge the gap between traditional data mining and the latest advances in newly emerging information services. It explores the extension of well-studied algorithms and approaches into these new research arenas.

  11. Robotics for mining control

    Energy Technology Data Exchange (ETDEWEB)

    1986-11-01

    In 1982 surveys of the mining industry revealed no applications of robotics existed and none were planned. This report provides a general overview of automation in the mining industry since this point in time. Roof control electronics, gas monitoring, jumbo drill automation, remote and sensor- controlled continuous miners, automated trolley trucks, roof bolting and screening machines are examples of technology available today. The report concludes with recommendations as to six potential research areas. 25 refs.

  12. Mining with Rare Cases

    Science.gov (United States)

    Weiss, Gary M.

    Rare cases are often the most interesting cases. For example, in medical diagnosis one is typically interested in identifying relatively rare diseases, such as cancer, rather than more frequently occurring ones, such as the common cold. In this chapter we discuss the role of rare cases in Data Mining. Specific problems associated with mining rare cases are discussed, followed by a description of methods for addressing these problems.

  13. The modernisation of mining

    CSIR Research Space (South Africa)

    Ritchken, E

    2017-10-01

    Full Text Available mechanisms that will entrench the collaboration. The Phakisa had the task of developing collaborative solutions in response to the mining cluster challenges. • Operates through threat • Company focus • Objective is to comply • Company acts... in relative isolation. • Focus on ticking boxes • Focus on individual, easy to measure, projects of limited ambition • Funding through mining company balance sheet. • Creativity unlocked in finding loop- holes in compliance framework – does...

  14. Bauxite Mining Sustainably

    Science.gov (United States)

    Atkins, Patrick R.; Bayliss, Chris; Ward, Sam

    In 1990, the International Aluminum Institute began a program to report on the bauxite mining and rehabilitation activities of the worldwide industry. A survey process was initiated and reports were published in 1992, 2000 and 2004. The most recent report includes extensive data on mines representing over 70% of the world's output of bauxite and includes a more detailed focus on the social and economic as well as the environmental performance of the industry.

  15. International mining forum 2004, new technologies in underground mining, safety in mines proceedings

    Energy Technology Data Exchange (ETDEWEB)

    Jerzy Kicki; Eugeniusz Sobczyk (eds.)

    2004-01-15

    The book comprises technical papers that were presented at the International Mining Forum 2004. This event aims to bring together scientists and engineers in mining, rock mechanics, and computer engineering, with a view to explore and discuss international developments in the field. Topics discussed in this book are: trends in the mining industry; new solutions and tendencies in underground mines; rock engineering problems in underground mines; utilization and exploitation of methane; prevention measures for the control of rock bursts in Polish mines; and current problems in Ukrainian coal mines.

  16. WEB STRUCTURE MINING

    Directory of Open Access Journals (Sweden)

    CLAUDIA ELENA DINUCĂ

    2011-01-01

    Full Text Available The World Wide Web became one of the most valuable resources for information retrievals and knowledge discoveries due to the permanent increasing of the amount of data available online. Taking into consideration the web dimension, the users get easily lost in the web’s rich hyper structure. Application of data mining methods is the right solution for knowledge discovery on the Web. The knowledge extracted from the Web can be used to raise the performances for Web information retrievals, question answering and Web based data warehousing. In this paper, I provide an introduction of Web mining categories and I focus on one of these categories: the Web structure mining. Web structure mining, one of three categories of web mining for data, is a tool used to identify the relationship between Web pages linked by information or direct link connection. It offers information about how different pages are linked together to form this huge web. Web Structure Mining finds hidden basic structures and uses hyperlinks for more web applications such as web search.

  17. Mine for sale

    International Nuclear Information System (INIS)

    Beer, G.

    2006-01-01

    The newest Slovak brown coal mine - Bana Zahorie is in crisis. Despite the fact that experts believe that along with Bana Novaky, it has the most potential. The owners have started its liquidation. One of the walls has collapsed and another part flooded. Nobody was hurt, but some equipment is still underground. The mine had already lost equipment in the past. During an accident in 2000, equipment worth several tens of millions was destroyed. 'After the accident, mining had to be stopped and from a technical point of view that was the end of the joint stock company, Bana Zahorie Cary. The company could not raise the funds necessary to recover from the accident,' stated the Director of the mine, Jan Palkovic. But he stressed that only the joint stock company is in liquidation, the mine is still being ventilated and the water is being pumped out. But the company management still does not want to specify who will become the new owner of the lignite deposits in Zahorie. The Director promised to publish more details within several weeks. All competencies and mining rights of the former Bana Zahorie are being transferred to a new company - joint stock company Bana Cary. (author)

  18. Mining in 2015

    Energy Technology Data Exchange (ETDEWEB)

    Hood, M.; Hatherly, P.; Gurgenci, H. [Centre for Mining Technology and Equipment (Australia)

    1999-10-01

    New technology in open-pit and underground hard rock mining in 2015 is anticipated in this article, based on a paper presented to the 1998 invitation symposium - 'Technology - Australia's future: new technology for traditional industry', held in Freemantle, WA, 24-25 November 1998. It is expected that essential mining operations of rock breakage and transport and ore processing will still exist but the use of drills, shovels/LHDs and trucks is likely to be replaced by continuous, intelligent, automated mining systems. Rock blasting models need to be fed data on rock properties at each blasthole for high accuracy. The authors believe that in 2015 measurements of rock properties will be a routine part of the drilling process. Blasthole drills will be fitted with a range of mechanical and geophysical sensors. New, non-explosive methods of rock breaking such as oscillating disc cutting, may be available. Mining automation will improve safety and productivity, perhaps with the automation of dragline swing LHDs and trucks may be able to drive themselves, with operators monitoring and intervening when necessary. Performance and machine condition data may be applied to improve equipment design. Australian mining stands to gain by these advances in mining technology. 1 fig., 3 photos.

  19. Sustainable mining management

    International Nuclear Information System (INIS)

    Tejera Oliver, J. L.

    2009-01-01

    Mining activities are carried out by the older man and have provided resources, since ancient times, for their development and progress. With the discovery of fire will show the first metals that have marked the civilizations of copper, bronze and iron, and is the prehistory of the Stone Age tools that man has made from the exploitation of quarries first. The industrial revolution of the nineteenth century is linked to coal and steel, and could not conceiver of todays society without oil and gas, without silicon and coltan. But the mines are often aggressive and, despite their need and what they contribute to the development are answered by the societies where are made. during recent years there has been growing international efforts to try to make the minimum requirements of sustainable exploitation (European Directives, GMI, GRI, etc.) In AENOR, and within the Technical Committee of Standardization 22 Mining and Explosives, chaired by AITEMIN, was established the subcommittee 3, chaired by IGME, where, with the participation of all stake holders, have developed some standards on sustainable mining management sustainable mining that will be a tool available to mining companies to demonstrate their sustainable use to Society. (Author)

  20. Reliable computer systems.

    Science.gov (United States)

    Wear, L L; Pinkert, J R

    1993-11-01

    In this article, we looked at some decisions that apply to the design of reliable computer systems. We began with a discussion of several terms such as testability, then described some systems that call for highly reliable hardware and software. The article concluded with a discussion of methods that can be used to achieve higher reliability in computer systems. Reliability and fault tolerance in computers probably will continue to grow in importance. As more and more systems are computerized, people will want assurances about the reliability of these systems, and their ability to work properly even when sub-systems fail.

  1. Human factor reliability program

    International Nuclear Information System (INIS)

    Knoblochova, L.

    2017-01-01

    The human factor's reliability program was at Slovenske elektrarne, a.s. (SE) nuclear power plants. introduced as one of the components Initiatives of Excellent Performance in 2011. The initiative's goal was to increase the reliability of both people and facilities, in response to 3 major areas of improvement - Need for improvement of the results, Troubleshooting support, Supporting the achievement of the company's goals. The human agent's reliability program is in practice included: - Tools to prevent human error; - Managerial observation and coaching; - Human factor analysis; -Quick information about the event with a human agent; -Human reliability timeline and performance indicators; - Basic, periodic and extraordinary training in human factor reliability(authors)

  2. Integrated circuit devices in control systems of coal mining complexes

    Energy Technology Data Exchange (ETDEWEB)

    1983-01-01

    Systems of automatic monitoring and control of coal mining complexes developed in the 1960's used electromagnetic relays, thyristors, and flip-flops on transistors of varying conductivity. The circuits' designers, devoted much attention to ensuring spark safety, lowering power consumption, and raising noise immunity and repairability of functional devices. The fast development of integrated circuitry led to the use of microelectronic components in most devices of mine automation. An analysis of specifications and experimental research into integrated circuits (IMS) shows that the series K 176 IMS components made by CMOS technology best meet mine conditions of operation. The use of IMS devices under mine conditions has demonstrated their high reliability. Further development of integrated circuitry involve using microprocessors and microcomputers. (SC)

  3. Redo log process mining in real life : data challenges & opportunities

    NARCIS (Netherlands)

    González López de Murillas, E.; Hoogendoorn, G.E.; Reijers, H.A.; Teniente, E.; Weidlich, M.

    2018-01-01

    Data extraction and preparation are the most time-consuming phases of any process mining project. Due to the variability on the sources of event data, it remains a highly manual process in most of the cases. Moreover, it is very difficult to obtain reliable event data in enterprise systems that are

  4. Mission-Critical Mobile Broadband Communications in Open Pit Mines

    DEFF Research Database (Denmark)

    Uzeda Garcia, Luis Guilherme; Portela Lopes de Almeida, Erika; Barbosa, Viviane S. B.

    2016-01-01

    that need to be met by the wireless network. This article introduces fundamental concepts behind open-pit mining and discusses why this ever changing environment coupled with strict industrial reliability requirements pose unique challenges to traditional broadband network planning and optimization...

  5. On-Site Radon Detection of Mining-induced Fractures from Overlying Strata to the Surface: A Case Study of the Baoshan Coal Mine in China

    Directory of Open Access Journals (Sweden)

    Wei Zhang

    2014-12-01

    Full Text Available Large-scale longwall mining of shallow coal seams may cause mining-induced fractures that can project completely through to the surface. This could lead to a series of mine safety and environmental issues, further deteriorating the already fragile ecological environment in the Western mining areas in China. Therefore, an accurate and effective understanding of the spatiotemporal evolution law of mining-induced fractures in overlying strata and its relationship to upper aquifers is critical. In this paper, the application of the geophysical-chemical properties of radon in mining engineering is explored as a potential solution to the shortcomings of existing surveying methods. A radioactive measurement method is proposed for the detection of the development of mining-induced fractures from overlying strata to the surface in the Baoshan Coal Mine (BCM. The on-site test indicated that the first weighting step is approximately 60 m, the average periodic weighting step is approximately 20 m, and the influence coverage of the advanced abutment pressure is approximately 30 m. The presented method could be used as an indirect technical support to increase the safety of coal mining by acting as a simple, fast, and reliable method of detecting mining-induced fractures in overlying strata.

  6. Evaluation of natural amelioration of acidic deep mine discharges in Western Pennsylvania

    International Nuclear Information System (INIS)

    Lambert, D.C.; Dzombak, D.A.; Aljoe, W.W.

    1999-01-01

    Abandoned mine drainage (AMD) has long been the most serious water quality and watershed degradation problem in the Appalachian region of the U.S. and in some other areas of the nation. In several areas of western Pennsylvania, deep mine discharges that were reliably described as highly acidic in the 1960s and 1970s have shown natural amelioration of CO 2 acidity. A number of different factors, including mine flooding and overburden chemistry, may cause improvement in mine water quality. The authors are studying the hydrologic and geochemical factors responsible for improvements over time in the quality of water discharges from abandoned deep mines. The project is focused on the study of a set of mine water discharges associated with abandoned, interconnected deep mines in the Uniontown Syncline of Western Pennsylvania. This area was studied extensively under Pennsylvania's Operation Scarlift in the early 1970s, and one year of monthly water quality data are available from 1974-75. The mined-out coal basin of the Uniontown Syncline is unique in that different mining methods were employed in the same coal seam over the basin. The resulting discharges are from flooded, unflooded, and partially flooded abandoned underground coal mines. This paper presents an overview of the hydraulic system in the mine network of the Uniontown Syncline along with a summary of selected data from the 1974-75 and 1998-99 studies. Preliminary interpretations of these data in relation to the Scarlift data are also presented

  7. Data mining in Cloud Computing

    Directory of Open Access Journals (Sweden)

    Ruxandra-Ştefania PETRE

    2012-10-01

    Full Text Available This paper describes how data mining is used in cloud computing. Data Mining is used for extracting potentially useful information from raw data. The integration of data mining techniques into normal day-to-day activities has become common place. Every day people are confronted with targeted advertising, and data mining techniques help businesses to become more efficient by reducing costs.Data mining techniques and applications are very much needed in the cloud computing paradigm. The implementation of data mining techniques through Cloud computing will allow the users to retrieve meaningful information from virtually integrated data warehouse that reduces the costs of infrastructure and storage.

  8. Methane emissions from coal mining

    International Nuclear Information System (INIS)

    Boyer, C.M.; Kelafant, J.R.; Kuuskraa, V.A.; Manger, K.C.; Kruger, D.

    1990-09-01

    The report estimates global methane emissions from coal mining on a country specific basis, evaluates the technologies available to degasify coal seams and assesses the economics of recovering methane liberated during mining. 33 to 64 million tonnes were liberated in 1987 from coal mining, 75 per cent of which came from China, the USSR, Poland and the USA. Methane emissions from coal mining are likely to increase. Emission levels vary between surface and underground mines. The methane currently removed from underground mines for safety reasons could be used in a number of ways, which may be economically attractive. 55 refs., 19 figs., 24 tabs

  9. Academic Performance: An Approach From Data Mining

    Directory of Open Access Journals (Sweden)

    David L. La Red Martinez

    2012-02-01

    Full Text Available The relatively low% of students promoted and regularized in Operating Systems Course of the LSI (Bachelor’s Degree in Information Systems of FaCENA (Faculty of Sciences and Natural Surveying - Facultad de Ciencias Exactas, Naturales y Agrimensura of UNNE (academic success, prompted this work, whose objective is to determine the variables that affect the academic performance, whereas the final status of the student according to the Res. 185/03 CD (scheme for evaluation and promotion: promoted, regular or free1. The variables considered are: status of the student, educational level of parents, secondary education, socio-economic level, and others. Data warehouse (Data Warehouses: DW and data mining (Data Mining: DM techniques were used to search pro.les of students and determine success or failure academic potential situations. Classifications through techniques of clustering according to different criteria have become. Some criteria were the following: mining of classification according to academic program, according to final status of the student, according to importance given to the study, mining of demographic clustering and Kohonen clustering according to final status of the student. Were conducted statistics of partition, detail of partitions, details of clusters, detail of fields and frequency of fields, overall quality of each process and quality detailed (precision, classification, reliability, arrays of confusion, diagrams of gain / elevation, trees, distribution of nodes, of importance of fields, correspondence tables of fields and statistics of cluster. Once certain profiles of students with low academic performance, it may address actions aimed at avoiding potential academic failures. This work aims to provide a brief description of aspects related to the data warehouse built and some processes of data mining developed on the same.

  10. Reliability and safety engineering

    CERN Document Server

    Verma, Ajit Kumar; Karanki, Durga Rao

    2016-01-01

    Reliability and safety are core issues that must be addressed throughout the life cycle of engineering systems. Reliability and Safety Engineering presents an overview of the basic concepts, together with simple and practical illustrations. The authors present reliability terminology in various engineering fields, viz.,electronics engineering, software engineering, mechanical engineering, structural engineering and power systems engineering. The book describes the latest applications in the area of probabilistic safety assessment, such as technical specification optimization, risk monitoring and risk informed in-service inspection. Reliability and safety studies must, inevitably, deal with uncertainty, so the book includes uncertainty propagation methods: Monte Carlo simulation, fuzzy arithmetic, Dempster-Shafer theory and probability bounds. Reliability and Safety Engineering also highlights advances in system reliability and safety assessment including dynamic system modeling and uncertainty management. Cas...

  11. Human reliability analysis

    International Nuclear Information System (INIS)

    Dougherty, E.M.; Fragola, J.R.

    1988-01-01

    The authors present a treatment of human reliability analysis incorporating an introduction to probabilistic risk assessment for nuclear power generating stations. They treat the subject according to the framework established for general systems theory. Draws upon reliability analysis, psychology, human factors engineering, and statistics, integrating elements of these fields within a systems framework. Provides a history of human reliability analysis, and includes examples of the application of the systems approach

  12. Reliability of electronic systems

    International Nuclear Information System (INIS)

    Roca, Jose L.

    2001-01-01

    Reliability techniques have been developed subsequently as a need of the diverse engineering disciplines, nevertheless they are not few those that think they have been work a lot on reliability before the same word was used in the current context. Military, space and nuclear industries were the first ones that have been involved in this topic, however not only in these environments it is that it has been carried out this small great revolution in benefit of the increase of the reliability figures of the products of those industries, but rather it has extended to the whole industry. The fact of the massive production, characteristic of the current industries, drove four decades ago, to the fall of the reliability of its products, on one hand, because the massively itself and, for other, to the recently discovered and even not stabilized industrial techniques. Industry should be changed according to those two new requirements, creating products of medium complexity and assuring an enough reliability appropriated to production costs and controls. Reliability began to be integral part of the manufactured product. Facing this philosophy, the book describes reliability techniques applied to electronics systems and provides a coherent and rigorous framework for these diverse activities providing a unifying scientific basis for the entire subject. It consists of eight chapters plus a lot of statistical tables and an extensive annotated bibliography. Chapters embrace the following topics: 1- Introduction to Reliability; 2- Basic Mathematical Concepts; 3- Catastrophic Failure Models; 4-Parametric Failure Models; 5- Systems Reliability; 6- Reliability in Design and Project; 7- Reliability Tests; 8- Software Reliability. This book is in Spanish language and has a potentially diverse audience as a text book from academic to industrial courses. (author)

  13. Operational safety reliability research

    International Nuclear Information System (INIS)

    Hall, R.E.; Boccio, J.L.

    1986-01-01

    Operating reactor events such as the TMI accident and the Salem automatic-trip failures raised the concern that during a plant's operating lifetime the reliability of systems could degrade from the design level that was considered in the licensing process. To address this concern, NRC is sponsoring the Operational Safety Reliability Research project. The objectives of this project are to identify the essential tasks of a reliability program and to evaluate the effectiveness and attributes of such a reliability program applicable to maintaining an acceptable level of safety during the operating lifetime at the plant

  14. Circuit design for reliability

    CERN Document Server

    Cao, Yu; Wirth, Gilson

    2015-01-01

    This book presents physical understanding, modeling and simulation, on-chip characterization, layout solutions, and design techniques that are effective to enhance the reliability of various circuit units.  The authors provide readers with techniques for state of the art and future technologies, ranging from technology modeling, fault detection and analysis, circuit hardening, and reliability management. Provides comprehensive review on various reliability mechanisms at sub-45nm nodes; Describes practical modeling and characterization techniques for reliability; Includes thorough presentation of robust design techniques for major VLSI design units; Promotes physical understanding with first-principle simulations.

  15. Colombia, mining country. Vision a year 2019

    International Nuclear Information System (INIS)

    2006-01-01

    Scope of the state action for the mining sector, the performance of the mining sector, regional perceptions of mining development, construction of a long-term vision for the mining sector, the action plan and goals follow-up

  16. Safety Research and Experimental Coal Mines

    Data.gov (United States)

    Federal Laboratory Consortium — Safety Research and Experimental Coal MinesLocation: Pittsburgh SiteThe Safety Research Coal Mine and Experimental Mine complex is a multi-purpose underground mine...

  17. Mining in Australia

    Energy Technology Data Exchange (ETDEWEB)

    Shimada, S

    1986-01-01

    Statistics are given on: 1) Australian dependence on imported raw materials in 1980; 2) production levels in the different mining fields in 1981; 3) trends in the production of minerals over the years 1961-1981. The role of the mining industry in the Australian economy is outlined, and brief details given of its structure. Further statistics are given regarding trends in the production of coal, iron, salt, lead and zinc during the period 1961-1981, together with details of the number of people employed in these industries. Operations at some of the principal mines (coal, iron ore and salt) are outlined and 1983 production figures for all mineral resources are given. 18 refs., 21 figs., 5 tabs.

  18. Mining and the environment

    International Nuclear Information System (INIS)

    Janecka, V.; Nemec, V.; Bradka, S.; Placek, V.; Sulovsky, P.

    1992-01-01

    The proceedings contain 30 contributions, out of which 9 have been inputted in INIS. They are concerned with uranium mines and mills in the Czech Republic. The impacts of the mining activities and of the mill tailings on the environment and the population are assessed, and it is concluded that the radiation hazard does not exceed that from natural background. Considerable attention is paid to the monitoring of the surroundings of mines and mills and to landscaping activities. Proposed technologies for the purification of waste waters from the chemical leaching process are described. Ways to eliminate environmental damage from abandoned tailings settling ponds are suggested. (M.D.). 18 tabs., 21 figs., 43 refs

  19. Data mining methods

    CERN Document Server

    Chattamvelli, Rajan

    2015-01-01

    DATA MINING METHODS, Second Edition discusses both theoretical foundation and practical applications of datamining in a web field including banking, e-commerce, medicine, engineering and management. This book starts byintroducing data and information, basic data type, data category and applications of data mining. The second chapterbriefly reviews data visualization technology and importance in data mining. Fundamentals of probability and statisticsare discussed in chapter 3, and novel algorithm for sample covariants are derived. The next two chapters give an indepthand useful discussion of data warehousing and OLAP. Decision trees are clearly explained and a new tabularmethod for decision tree building is discussed. The chapter on association rules discusses popular algorithms andcompares various algorithms in summary table form. An interesting application of genetic algorithm is introduced inthe next chapter. Foundations of neural networks are built from scratch and the back propagation algorithm is derived...

  20. Auxiliary mine ventilation manual

    International Nuclear Information System (INIS)

    Workplace Safety North

    2010-01-01

    An adequate ventilation system is needed for air quality and handling in a mine and is comprised of many different pieces of equipment for removing contaminated air and supplying fresh air and thereby provide a satisfactory working environment. This manual highlights auxiliary ventilation systems made up of small fans, ducts, tubes, air movers, deflectors and additional air flow controls which distribute fresh air delivered by the primary system to all areas. A review of auxiliary ventilation is provided. Design, operation and management issues are discussed and guidelines are furnished. This manual is limited to underground hard rock operations and does not address directly other, specific auxiliary systems, either in underground coal mines or uranium mines.

  1. Auxiliary mine ventilation manual

    Energy Technology Data Exchange (ETDEWEB)

    Workplace Safety North

    2010-07-01

    An adequate ventilation system is needed for air quality and handling in a mine and is comprised of many different pieces of equipment for removing contaminated air and supplying fresh air and thereby provide a satisfactory working environment. This manual highlights auxiliary ventilation systems made up of small fans, ducts, tubes, air movers, deflectors and additional air flow controls which distribute fresh air delivered by the primary system to all areas. A review of auxiliary ventilation is provided. Design, operation and management issues are discussed and guidelines are furnished. This manual is limited to underground hard rock operations and does not address directly other, specific auxiliary systems, either in underground coal mines or uranium mines.

  2. Position finding 1993 - comments on the situation of mining in Germany

    International Nuclear Information System (INIS)

    Leuschner, H.J.

    1993-01-01

    The lecture delivered on the meeting of the Bavarian mining industry in Bad Reichenhall on October 15, 1993, is centered on the report on the actual situation of the individual branches of mining in Germany. This analysis of the situation of mining is to be seen in front of the background of the present discussion on the prospects of Germany as place of investments. The key question was raised viz. the question of the future of mining and the mining suppliers. The main conclusion reads: The mining industries need a clearly defined framework of conditions decided upon on political level and reliable enough for being a sound basis for long-term investment decisions. (orig.)

  3. Geotechnical survey procedures for a repository mine

    International Nuclear Information System (INIS)

    Walther, C.

    1993-01-01

    The approach to the survey involves the operational realisation of an information process beginning with the definition of the survey programme and ending with the presentation of the survey results in the form of planning and assessment documents. - The survey methods must conform with the mine regulations, provide reliable predictions and produce the maximum possible salient information. The recording of large and varied amounts of data, and the complex interpretation procedures that follow require effective data and information management to allow the presentation of the results in accordance with the planning specifications. (orig.) [de

  4. Worldwide ISL Uranium Mining Outlook

    International Nuclear Information System (INIS)

    Boytsov, A.; Stander, S.; Martynenko, V.

    2014-01-01

    Contents: • ISL uranium production historical review and current status; • ISL versus conventional mining; • Acid versus alkaline ISL; • ISL cost considerations; • Principal criteria and parameters for ISL mining; • ISL production forecast and resources availability

  5. The South African mining industry

    International Nuclear Information System (INIS)

    Langton, G.

    1982-01-01

    This paper covers six of the many mining and associated developments in South Africa. These are: (1) Deep level gold mining at Western Deep Levels Limited - (2) Palabora Mining Company Limited - SA's unique copper mine - (3) Production of steel and vanadium-rich slag at Highveld Steel and Vanadium Corporation - (4) Coal mining at Kriel and Kleinkopje Collieries - (5) A mass mining system for use below the Gabbro Sill at Premier Diamond Mine - (6) Uranium production - joint metallurgical scheme- Orange Free State Gold Mines. - For publication in this journal the original paper has been summarised. Should any reader wish to have the full text in English he should write to the author at the address below. (orig.) [de

  6. Construction over abandoned mine workings

    Energy Technology Data Exchange (ETDEWEB)

    Healy, P R; Head, J M

    1984-01-01

    Guidance is given for engineers involved with the planning and development of sites previously undermined for coal and other minerals. Past methods of mining employed in Britain are described, and their short- and long-term effects on surface stability are assessed. Where modern methods of mining are relevant, or where structural design techniques for the surface effects of mining can be applied, these are included for illustration and completeness. Additional objectives over and above those for conventional site investigations are identified, and details are provided for the planning and execution of a mining investigation. Techniques for consolidation of old mine workings and remedial measures for mine shafts are described. Foundation design options are included for cases where expected ground movements can be accommodated. A comprehensive guide to sources of information on previous mining is presented, together with an example of a specification suitable for the consolidation of old shallow mine workings. (50 refs.)

  7. Swedish mines. Underground exploitation methods

    International Nuclear Information System (INIS)

    Paucard, A.

    1960-01-01

    Between 1949 and 1957, 10 engineers of the Mining research and exploitation department of the CEA visited 17 Swedish mines during 5 field trips. This paper presents a compilation of the information gathered during these field trips concerning the different underground mining techniques used in Swedish iron mines: mining with backfilling (Central Sweden and Boliden mines); mining without backfilling (mines of the polar circle area). The following techniques are described successively: pillar drawing and backfilled slices (Ammeberg, Falun, Garpenberg, Boliden group), sub-level pillar drawing (Grangesberg, Bloettberget, Haeksberg), empty room and sub-level pillar drawing (Bodas, Haksberg, Stripa, Bastkarn), storage chamber pillar drawing (Bodas, Haeksberg, Bastkarn), and pillar drawing by block caving (ldkerberget). Reprint of a paper published in Revue de l'Industrie Minerale, vol. 41, no. 12, 1959 [fr

  8. Personal continuous route pattern mining

    Institute of Scientific and Technical Information of China (English)

    Qian YE; Ling CHEN; Gen-cai CHEN

    2009-01-01

    In the daily life, people often repeat regular routes in certain periods. In this paper, a mining system is developed to find the continuous route patterns of personal past trips. In order to count the diversity of personal moving status, the mining system employs the adaptive GPS data recording and five data filters to guarantee the clean trips data. The mining system uses a client/server architecture to protect personal privacy and to reduce the computational load. The server conducts the main mining procedure but with insufficient information to recover real personal routes. In order to improve the scalability of sequential pattern mining, a novel pattern mining algorithm, continuous route pattern mining (CRPM), is proposed. This algorithm can tolerate the different disturbances in real routes and extract the frequent patterns. Experimental results based on nine persons' trips show that CRPM can extract more than two times longer route patterns than the traditional route pattern mining algorithms.

  9. Enhancing the safety and efficiency of the driving gear of coal mining machinery by using water as a hydraulic fluid and enhancing the reliability of scraper-chain conveyors; Erhoehung der Sicherheit und Leistungsfaehigkeit der Antriebstechnik von Arbeitsmaschinen durch Verwendung von Wasserhydraulik sowie Erhoehung der Zuverlaessigkeit der Kettenkratzerfoerderer

    Energy Technology Data Exchange (ETDEWEB)

    Reichel, J.; Boeing, R.; Graetz, A.; Loehning, H.D.; Plum, D.

    1997-12-31

    The objective pursued is to increasingly use water or high water-content fluids as a substitute for other hydraulic fluids in driving gear of mining machinery. The state of the art of the technology is represented only by individual solutions achieved for given purposes which are not suitable for other applications, let alone for coal mining machinery. The research project was to identify hydraulic components that will permit the use of water or watery substances as a hydraulic fluid in mining applications. The components have been found and further developed, and finally systems with linear and rotatory drives have been tested at various test facilities in order to derive information on the system behaviour of pressurized fluids and machinery components and their suitability for coal mining applications. (orig./CB) [Deutsch] In der untertaegigen Antriebstechnik sollen vermehrt Wasser und wasserhaltige Fluessigkeiten eingesetzt werden. Der Stand der Technik fuehrt bei der Anwendung von Wasserhydraulik immer wieder nur Einzelloesungen auf, die nicht allgemein und insbesondere im Steinkohlenbergbau angewendet werden koennen. Im Rahmen dieses Forschungsvorhabens wurden fuer die Wasserhydraulik geeignete Komponenten untersucht, weiterentwickelt und schliesslich Systeme mit linearen und rotatorischen Antrieben auf verschiedenen Pruefstaenden erprobt, um Aussagen ueber das Systemverhalten von Druckfluessigkeit und Bauelementen fuer Bergbauanwendungen zu bekommen. (orig./MSK)

  10. Mining robotics sensors

    CSIR Research Space (South Africa)

    Green, JJ

    2011-07-01

    Full Text Available International Conference of CAD/CAM, Robotics & Factories of the Future (CARs&FOF 2011) 26-28 July 2-11, Kuala Lumpur, Malaysia Mining Robotics Sensors Perception Sensors on a Mine Safety Platform Green JJ1, Hlophe K2, Dickens J3, Teleka R4, Mathew Price5...-28 July 2-11, Kuala Lumpur, Malaysia visualization in confined, lightless environments, and thermography for assessing the safety and stability of hanging walls. Over the last decade approximately 200 miners have lost their lives per year in South...

  11. Novel mining methods

    CSIR Research Space (South Africa)

    Monchusi, B

    2012-10-01

    Full Text Available stream_source_info Monchusi_2012.pdf.txt stream_content_type text/plain stream_size 1953 Content-Encoding ISO-8859-1 stream_name Monchusi_2012.pdf.txt Content-Type text/plain; charset=ISO-8859-1 Novel Mining Methods 4th... 2012 Slide 12 CSIR mine safety platform AR Drone Differential time-of-flight beacon Sampling ? CSIR 2012 Slide 13 Reef Laser-Induced Breakdown Spectroscopy (LIBS) head Scan X-Y Laser/Spectrometer/Computer Rock Breaking ? CSIR 2012 Slide...

  12. Data mining for dummies

    CERN Document Server

    Brown, Meta S

    2014-01-01

    Delve into your data for the key to success Data mining is quickly becoming integral to creating value and business momentum. The ability to detect unseen patterns hidden in the numbers exhaustively generated by day-to-day operations allows savvy decision-makers to exploit every tool at their disposal in the pursuit of better business. By creating models and testing whether patterns hold up, it is possible to discover new intelligence that could change your business''s entire paradigm for a more successful outcome. Data Mining for Dummies shows you why it doesn''t take a data scientist to gain

  13. Data mining mobile devices

    CERN Document Server

    Mena, Jesus

    2013-01-01

    With today's consumers spending more time on their mobiles than on their PCs, new methods of empirical stochastic modeling have emerged that can provide marketers with detailed information about the products, content, and services their customers desire.Data Mining Mobile Devices defines the collection of machine-sensed environmental data pertaining to human social behavior. It explains how the integration of data mining and machine learning can enable the modeling of conversation context, proximity sensing, and geospatial location throughout large communities of mobile users

  14. A STUDY OF TEXT MINING METHODS, APPLICATIONS,AND TECHNIQUES

    OpenAIRE

    R. Rajamani*1 & S. Saranya2

    2017-01-01

    Data mining is used to extract useful information from the large amount of data. It is used to implement and solve different types of research problems. The research related areas in data mining are text mining, web mining, image mining, sequential pattern mining, spatial mining, medical mining, multimedia mining, structure mining and graph mining. Text mining also referred to text of data mining, it is also called knowledge discovery in text (KDT) or knowledge of intelligent text analysis. T...

  15. Hawaii Electric System Reliability

    Energy Technology Data Exchange (ETDEWEB)

    Loose, Verne William [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Silva Monroy, Cesar Augusto [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2012-08-01

    This report addresses Hawaii electric system reliability issues; greater emphasis is placed on short-term reliability but resource adequacy is reviewed in reference to electric consumers’ views of reliability “worth” and the reserve capacity required to deliver that value. The report begins with a description of the Hawaii electric system to the extent permitted by publicly available data. Electrical engineering literature in the area of electric reliability is researched and briefly reviewed. North American Electric Reliability Corporation standards and measures for generation and transmission are reviewed and identified as to their appropriateness for various portions of the electric grid and for application in Hawaii. Analysis of frequency data supplied by the State of Hawaii Public Utilities Commission is presented together with comparison and contrast of performance of each of the systems for two years, 2010 and 2011. Literature tracing the development of reliability economics is reviewed and referenced. A method is explained for integrating system cost with outage cost to determine the optimal resource adequacy given customers’ views of the value contributed by reliable electric supply. The report concludes with findings and recommendations for reliability in the State of Hawaii.

  16. Hawaii electric system reliability.

    Energy Technology Data Exchange (ETDEWEB)

    Silva Monroy, Cesar Augusto; Loose, Verne William

    2012-09-01

    This report addresses Hawaii electric system reliability issues; greater emphasis is placed on short-term reliability but resource adequacy is reviewed in reference to electric consumers' views of reliability %E2%80%9Cworth%E2%80%9D and the reserve capacity required to deliver that value. The report begins with a description of the Hawaii electric system to the extent permitted by publicly available data. Electrical engineering literature in the area of electric reliability is researched and briefly reviewed. North American Electric Reliability Corporation standards and measures for generation and transmission are reviewed and identified as to their appropriateness for various portions of the electric grid and for application in Hawaii. Analysis of frequency data supplied by the State of Hawaii Public Utilities Commission is presented together with comparison and contrast of performance of each of the systems for two years, 2010 and 2011. Literature tracing the development of reliability economics is reviewed and referenced. A method is explained for integrating system cost with outage cost to determine the optimal resource adequacy given customers' views of the value contributed by reliable electric supply. The report concludes with findings and recommendations for reliability in the State of Hawaii.

  17. Improving machinery reliability

    CERN Document Server

    Bloch, Heinz P

    1998-01-01

    This totally revised, updated and expanded edition provides proven techniques and procedures that extend machinery life, reduce maintenance costs, and achieve optimum machinery reliability. This essential text clearly describes the reliability improvement and failure avoidance steps practiced by best-of-class process plants in the U.S. and Europe.

  18. LED system reliability

    NARCIS (Netherlands)

    Driel, W.D. van; Yuan, C.A.; Koh, S.; Zhang, G.Q.

    2011-01-01

    This paper presents our effort to predict the system reliability of Solid State Lighting (SSL) applications. A SSL system is composed of a LED engine with micro-electronic driver(s) that supplies power to the optic design. Knowledge of system level reliability is not only a challenging scientific

  19. Integrated system reliability analysis

    DEFF Research Database (Denmark)

    Gintautas, Tomas; Sørensen, John Dalsgaard

    Specific targets: 1) The report shall describe the state of the art of reliability and risk-based assessment of wind turbine components. 2) Development of methodology for reliability and risk-based assessment of the wind turbine at system level. 3) Describe quantitative and qualitative measures...

  20. Reliability of neural encoding

    DEFF Research Database (Denmark)

    Alstrøm, Preben; Beierholm, Ulrik; Nielsen, Carsten Dahl

    2002-01-01

    The reliability with which a neuron is able to create the same firing pattern when presented with the same stimulus is of critical importance to the understanding of neuronal information processing. We show that reliability is closely related to the process of phaselocking. Experimental results f...

  1. 30 CFR 77.1200 - Mine map.

    Science.gov (United States)

    2010-07-01

    ... SAFETY STANDARDS, SURFACE COAL MINES AND SURFACE WORK AREAS OF UNDERGROUND COAL MINES Maps § 77.1200 Mine...) The location of railroad tracks and public highways leading to the mine, and mine buildings of a permanent nature with identifying names shown; (k) Underground mine workings underlying and within 1,000...

  2. WIRELESS MINE WIDE TELECOMMUNICATIONS TECHNOLOGY

    International Nuclear Information System (INIS)

    Zvi H. Meiksin

    2002-01-01

    Two industrial prototype units for through-the-earth wireless communication were constructed and tested. Preparation for a temporary installation in NIOSH's Lake Lynn mine for the through-the-earth and the in-mine system were completed. Progress was made in the programming of the in-mine system to provide data communication. Work has begun to implement a wireless interface between equipment controllers and our in-mine system

  3. WIRELESS MINE WIDE TELECOMMUNICATIONS TECHNOLOGY

    Energy Technology Data Exchange (ETDEWEB)

    Zvi H. Meiksin

    2002-04-01

    Two industrial prototype units for through-the-earth wireless communication were constructed and tested. Preparation for a temporary installation in NIOSH's Lake Lynn mine for the through-the-earth and the in-mine system were completed. Progress was made in the programming of the in-mine system to provide data communication. Work has begun to implement a wireless interface between equipment controllers and our in-mine system.

  4. Design reliability engineering

    International Nuclear Information System (INIS)

    Buden, D.; Hunt, R.N.M.

    1989-01-01

    Improved design techniques are needed to achieve high reliability at minimum cost. This is especially true of space systems where lifetimes of many years without maintenance are needed and severe mass limitations exist. Reliability must be designed into these systems from the start. Techniques are now being explored to structure a formal design process that will be more complete and less expensive. The intent is to integrate the best features of design, reliability analysis, and expert systems to design highly reliable systems to meet stressing needs. Taken into account are the large uncertainties that exist in materials, design models, and fabrication techniques. Expert systems are a convenient method to integrate into the design process a complete definition of all elements that should be considered and an opportunity to integrate the design process with reliability, safety, test engineering, maintenance and operator training. 1 fig

  5. Bayesian methods in reliability

    Science.gov (United States)

    Sander, P.; Badoux, R.

    1991-11-01

    The present proceedings from a course on Bayesian methods in reliability encompasses Bayesian statistical methods and their computational implementation, models for analyzing censored data from nonrepairable systems, the traits of repairable systems and growth models, the use of expert judgment, and a review of the problem of forecasting software reliability. Specific issues addressed include the use of Bayesian methods to estimate the leak rate of a gas pipeline, approximate analyses under great prior uncertainty, reliability estimation techniques, and a nonhomogeneous Poisson process. Also addressed are the calibration sets and seed variables of expert judgment systems for risk assessment, experimental illustrations of the use of expert judgment for reliability testing, and analyses of the predictive quality of software-reliability growth models such as the Weibull order statistics.

  6. New mine projects, positive outlook

    Energy Technology Data Exchange (ETDEWEB)

    M. Cremer

    2006-12-15

    Speaking on the first day at the Mining 2006 Resources Convention the Deputy Director General, Mining and Petroleum gave an optimistic outlook for mining in 2007 based on the number of new projects under consideration or construction. The convention was held in early November in Brisbane, Queensland, Australia. 3 figs., 1 photo.

  7. Process mining : overview and opportunities

    NARCIS (Netherlands)

    Aalst, van der W.M.P.

    2012-01-01

    Over the last decade, process mining emerged as a new research ¿eld that focuses on the analysis of processes using event data. Classical data mining techniques such as classi¿cation, clustering, regression, association rule learning, and sequence/episode mining do not focus on business process

  8. Studies in frequent tree mining

    NARCIS (Netherlands)

    Knijf, De J.

    2008-01-01

    Employing Data mining techniques for structured data is particularly challenging, because it is commonly assumed that the structure of the data encodes part of its semantics. As a result are classical data mining techniques insufficient to analyze and mine these data. In this thesis we develop

  9. Review of South American mines

    International Nuclear Information System (INIS)

    Anon.

    1984-01-01

    A general overview is presented of the mining activity and plans for South America. The countries which are presented are Columbia, Argentina, Brazil, Venezuela, Chile, Peru, and Bolivia. The products of the mines include coal, bauxite, gold, iron, uranium, copper and numerous other minor materials. A discussion of current production, support and processing facilities, and mining strategies is also given

  10. in remediating acid mine drainage

    African Journals Online (AJOL)

    The management and treatment of contaminated mine water is one of the most urgent problems facing the South African mining industry. The cost advantage of permeable reactive barriers (PRBs) has seen their increased application as means of passively treating mine drainage. A PRB is built by placing a reactive material ...

  11. A direction of developing a mining method and mining complexes

    Energy Technology Data Exchange (ETDEWEB)

    Gabov, V.V.; Efimov, I.A. [St. Petersburg State Mining Institute, St. Petersburg (Russian Federation). Vorkuta Branch

    1996-12-31

    The analyses of a mining method as a main factor determining the development stages of mining units is presented. The paper suggests a perspective mining method which differs from the known ones by following peculiarities: the direction selectivity of cuts with regard to coal seams structure; the cutting speed, thickness and succession of dusts. This method may be done by modulate complexes (a shield carrying a cutting head for coal mining), their mining devices being supplied with hydraulic drive. An experimental model of the module complex has been developed. 2 refs.

  12. Mining dictionary: underground mining; open-cast mining; preparation and beneficiation; geology of mineral deposits

    Energy Technology Data Exchange (ETDEWEB)

    Goergen, H; Stoll, R D; Vriesen, R D; Welzenberg, B

    1981-01-01

    The dictionary reflects the latest technical developments in the vocabulary of mining methods and the mining industry. Volume I of the dictionary is English to German, Volume II German to English. 36,000 entries are included.

  13. 75 FR 17529 - High-Voltage Continuous Mining Machine Standard for Underground Coal Mines

    Science.gov (United States)

    2010-04-06

    ... High-Voltage Continuous Mining Machine Standard for Underground Coal Mines AGENCY: Mine Safety and... of high-voltage continuous mining machines in underground coal mines. It also revises MSHA's design...-- Underground Coal Mines III. Section-by-Section Analysis A. Part 18--Electric Motor-Driven Mine Equipment and...

  14. Internet technologies in the mining industry. Towards unattended mining systems

    Energy Technology Data Exchange (ETDEWEB)

    Krzykawski, Michal [FAMUR Group, Katowice (Poland)

    2009-08-27

    Global suppliers of longwall systems focus mainly on maximising the efficiency of the equipment they manufacture. Given the fact that, since 2004, coal demand on world markets has been constantly on the increase, even during an economic downturn, this endeavour seems fully justified. However, it should be remembered that maximum efficiency must be accompanied by maximum safety of all underground operations. This statement is based on the belief that the mining industry, which exploits increasingly deep and dangerous coal beds, faces the necessity to implement comprehensive IT systems for managing all mining processes and, in the near future, to use unmanned mining systems, fully controllable from the mine surface. The computerisation of mines is an indispensable element of the development of the world mining industry, a belief which has been put into practice with e-mine, developed by the FAMUR Group. (orig.)

  15. Potassium Permanganate as an Alternative for Gold Mining Wastewater Treatment

    Science.gov (United States)

    Ordiales, M.; Fernández, D.; Verdeja, L. F.; Sancho, J.

    2015-09-01

    The feasibility of using potassium permanganate as a reagent for cyanide oxidation in wastewater was experimentally studied. Both artificial and production wastewater from two different gold mines were tested. The experiments had three goals: determine the optimum reagent concentration and reaction time required to achieve total cyanide removal, obtain knowledge of the reaction kinetics, and improve the management of the amount of reagent. The results indicate that potassium permanganate is an effective and reliable oxidizing agent for the removal of cyanide from gold mining wastewater.

  16. Mining Together : Large-Scale Mining Meets Artisanal Mining, A Guide for Action

    OpenAIRE

    World Bank

    2009-01-01

    The present guide mining together-when large-scale mining meets artisanal mining is an important step to better understanding the conflict dynamics and underlying issues between large-scale and small-scale mining. This guide for action not only points to some of the challenges that both parties need to deal with in order to build a more constructive relationship, but most importantly it sh...

  17. Mining frequent binary expressions

    NARCIS (Netherlands)

    Calders, T.; Paredaens, J.; Kambayashi, Y.; Mohania, M.K.; Tjoa, A.M.

    2000-01-01

    In data mining, searching for frequent patterns is a common basic operation. It forms the basis of many interesting decision support processes. In this paper we present a new type of patterns, binary expressions. Based on the properties of a specified binary test, such as reflexivity, transitivity

  18. From mine to meadow

    Energy Technology Data Exchange (ETDEWEB)

    Gualdron, R; Camacho, R [Intercor, Barranquilla (Colombia). Environmental Engineering Division

    1993-10-01

    This article describes the rehabilitation of dumps and backfill areas at the world's largest export coal mine, El Cerrejon Zone Norte, in Northern Colombia. The rehabilitation process includes the preparation of surfaces and slopes, the placement of topsoil and the revegetation and reforestation of the prepared areas. 8 photos.

  19. Biomedical Data Mining

    NARCIS (Netherlands)

    Peek, N.; Combi, C.; Tucker, A.

    2009-01-01

    Objective: To introduce the special topic of Methods of Information in Medicine on data mining in biomedicine, with selected papers from two workshops on Intelligent Data Analysis in bioMedicine (IDAMAP) held in Verona (2006) and Amsterdam (2007). Methods: Defining the field of biomedical data

  20. Mining water governance

    NARCIS (Netherlands)

    Sosa Landeo, Milagros

    2017-01-01

    This thesis documents as well as questions how the presence of large mining operations in Andean regions of Peru alters social and natural landscapes. Taking conflicts over water as a useful entry-point for the analysis, it explores and unravels the dilemmas and challenges faced by the main

  1. Thin seam mining

    Energy Technology Data Exchange (ETDEWEB)

    Sikora, W [Politechnika Slaska, Gliwice (Poland). Instytut Mechanizacji Gornictwa

    1989-06-01

    Discusses thin seam mining in Poland and its prospects. There were 194 working faces in coal seams to 1.5 m thick in Poland in 1988. Of them, 115 fell on faces with powered supports, 79 on faces with SHC-40 and Valent props; 108 shearer loaders and 45 coal plows were used for longwall mining of thin coal seams. Drilling and blasting was used to mine 21 working faces. Longwall faces in seams to 1.0 m thick gave 2.0% coal output, faces in coal seams 1.01-1.5 m thick gave 12.2% of daily coal output of underground mining. Structure of daily coal output of faces in thin seams was the following: 52 faces below 300 t/day, 42 from 301-500 t/day, 63 from 501 to 1,000 t/day, 17 faces above 1,000 t/day. Prospects for increasing coal output of faces in thin seams are discussed. 7 refs.

  2. Frequent pattern mining

    CERN Document Server

    Aggarwal, Charu C

    2014-01-01

    Proposes numerous methods to solve some of the most fundamental problems in data mining and machine learning Presents various simplified perspectives, providing a range of information to benefit both students and practitioners Includes surveys on key research content, case studies and future research directions

  3. Contextual Text Mining

    Science.gov (United States)

    Mei, Qiaozhu

    2009-01-01

    With the dramatic growth of text information, there is an increasing need for powerful text mining systems that can automatically discover useful knowledge from text. Text is generally associated with all kinds of contextual information. Those contexts can be explicit, such as the time and the location where a blog article is written, and the…

  4. Title to mining properties

    International Nuclear Information System (INIS)

    Crouch, K.M.

    1976-01-01

    The requirements of the law which must be met in order to create title to an unpatented mining claim and the procedures which should be followed when an attempt is made to determine the title to the claim is acceptable are reviewed

  5. Large Data Set Mining

    NARCIS (Netherlands)

    Leemans, I.B.; Broomhall, Susan

    2017-01-01

    Digital emotion research has yet to make history. Until now large data set mining has not been a very active field of research in early modern emotion studies. This is indeed surprising since first, the early modern field has such rich, copyright-free, digitized data sets and second, emotion studies

  6. Making Pattern Mining Useful

    NARCIS (Netherlands)

    Vreeken, J.

    2009-01-01

    The discovery of patterns plays an important role in data mining. A pattern can be any type of regularity displayed in that data, such as, e.g. which items are typically sold together, which genes are mostly active for patients of a certain disease, etc, etc. Generally speaking, finding a pattern is

  7. ERA's Ranger uranium mine

    International Nuclear Information System (INIS)

    Davies, W.

    1997-01-01

    Energy Resource of Australia (ERA) is a public company with 68% of its shares owned by the Australian company North Limited. It is currently operating one major production centre - Ranger Mine which is 260 kilometres east of Darwin, extracting and selling uranium from the Ranger Mine in the Northern Territory to nuclear electricity utilities in Japan, South Korea, Europe and North America. The first drum of uranium oxide from Ranger was drummed in August 1981 and operations have continued since that time. ERA is also in the process of working towards obtaining approvals for the development of a second mine - Jabiluka which is located 20 kilometres north of Ranger. The leases of Ranger and Jabiluka adjoin. The Minister for the Environment has advised the Minister for Resources and Energy that there does not appear to be any environmental issue which would prevent the preferred Jabiluka proposal from proceeding. Consent for the development of ERA's preferred option for the development of Jabiluka is being sought from the Aboriginal Traditional Owners. Ranger is currently the third largest producing uranium mine in the world producing 4,237 tonnes of U 3 O 8 in the year to June 1997

  8. Grants Mining District

    Science.gov (United States)

    The Grants Mineral Belt was the focus of uranium extraction and production activities from the 1950s until the late 1990s. EPA is working with state, local, and federal partners to assess and address health risks and environmental effects of the mines

  9. Lunabotics Mining Competition

    Science.gov (United States)

    Mueller, Rob; Murphy, Gloria

    2010-01-01

    This slide presentation describes a competition to design a lunar robot (lunabot) that can be controlled either remotely or autonomously, isolated from the operator, and is designed to mine a lunar aggregate simulant. The competition is part of a systems engineering curriculum. The 2010 competition winners in five areas of the competition were acknowledged, and the 2011 competition was announced.

  10. Bioremediation of mine water.

    Science.gov (United States)

    Klein, Robert; Tischler, Judith S; Mühling, Martin; Schlömann, Michael

    2014-01-01

    Caused by the oxidative dissolution of sulfide minerals, mine waters are often acidic and contaminated with high concentrations of sulfates, metals, and metalloids. Because the so-called acid mine drainage (AMD) affects the environment or poses severe problems for later use, treatment of these waters is required. Therefore, various remediation strategies have been developed to remove soluble metals and sulfates through immobilization using physical, chemical, and biological approaches. Conventionally, iron and sulfate-the main pollutants in mine waters-are removed by addition of neutralization reagents and subsequent chemical iron oxidation and sulfate mineral precipitation. Biological treatment strategies take advantage of the ability of microorganisms that occur in mine waters to metabolize iron and sulfate. As a rule, these can be grouped into oxidative and reductive processes, reflecting the redox state of mobilized iron (reduced form) and sulfur (oxidized form) in AMD. Changing the redox states of iron and sulfur results in iron and sulfur compounds with low solubility, thus leading to their precipitation and removal. Various techniques have been developed to enhance the efficacy of these microbial processes, as outlined in this review.

  11. Application of indirect stress measurement techniques (non strain gauge based technology) to quantify stress environments in mines

    CSIR Research Space (South Africa)

    Stacey, TR

    2002-03-01

    Full Text Available Reliable values of in situ stress are essential for the valid modelling of mine layouts. Available non-strain gauge methods are reviewed as potential practical techniques for South African mines. From this review it is concluded that the most...

  12. Testing the electrostatic characteristics of polypropylene fabric with metallic yarns, intended for use in coal mines threatened by the explosion hazard. Part 2: Tests in coal mine

    International Nuclear Information System (INIS)

    Talarek, M; Orzech, L

    2011-01-01

    The aim of this paper was to assess the electrostatic safety of polypropylene fabric with metallic yarns intended for use in coal mines. Such fabrics have not been used in the Polish mining industry yet. The tests conducted have been divided into two subgroups: laboratory tests and tests in a coal mine. This paper presents the results of tests in a coal mine, where we have focused on the resistance-to-ground in some specific situations. Bags made of fabric at the roadway face were tested, as well as the roll of fabric during transport and carried by a miner. The results obtained allow the reliable assessment of the risk of using fabrics with metallic yarns in the explosive atmosphere which often occurs in coal mines.

  13. Mining and environment

    International Nuclear Information System (INIS)

    Pimiento, Elkin Vargas

    1998-01-01

    In order to obtain the best social and environmental results from mining activities, different solutions, which involve a variety of perspectives, have been proposed. These include the worldwide perspective based in the economy globalization paradigms; the regional perspective, focused in the integration of countries; the national perspective, which emphasizes the natural assets and development options, and finally a local perspective is incorporated to account for the participation of directly affected communities. Within this framework, the mining industry is requested to develop both technological and managerial tools appropriate to evaluate, optimize and communicate the social and environmental performance and output of its related activities, mainly in the developing countries. On the other hand, the governments have been committed to implement regulatory actions, of command and control type, based on an environmental legislation in line with the above mentioned perspectives and also to use economical instruments as a mean to accomplish environmental objectives. In Colombia the direct regulation methods have been traditionally used to prevent the environmental deterioration produced by mining activities, however, since the 1991 political constitution and the law 99 of 1993, the communities' participation and economical instruments were incorporated. A historic summary of the environmental legislation in our country from the early 70's up to now, showing its implications in mining is presented. Then a favorable tendency is indicated in the environmental improvement of the national extractive industry, accomplished as a result of the implementation of new strategies to minimize the impact of mining on the environment and to improve the well being of local communities

  14. Technologies for Decreasing Mining Losses

    Science.gov (United States)

    Valgma, Ingo; Väizene, Vivika; Kolats, Margit; Saarnak, Martin

    2013-12-01

    In case of stratified deposits like oil shale deposit in Estonia, mining losses depend on mining technologies. Current research focuses on extraction and separation possibilities of mineral resources. Selective mining, selective crushing and separation tests have been performed, showing possibilities of decreasing mining losses. Rock crushing and screening process simulations were used for optimizing rock fractions. In addition mine backfilling, fine separation, and optimized drilling and blasting have been analyzed. All tested methods show potential and depend on mineral usage. Usage in addition depends on the utilization technology. The questions like stability of the material flow and influences of the quality fluctuations to the final yield are raised.

  15. Reliability of construction materials

    International Nuclear Information System (INIS)

    Merz, H.

    1976-01-01

    One can also speak of reliability with respect to materials. While for reliability of components the MTBF (mean time between failures) is regarded as the main criterium, this is replaced with regard to materials by possible failure mechanisms like physical/chemical reaction mechanisms, disturbances of physical or chemical equilibrium, or other interactions or changes of system. The main tasks of the reliability analysis of materials therefore is the prediction of the various failure reasons, the identification of interactions, and the development of nondestructive testing methods. (RW) [de

  16. Structural Reliability Methods

    DEFF Research Database (Denmark)

    Ditlevsen, Ove Dalager; Madsen, H. O.

    The structural reliability methods quantitatively treat the uncertainty of predicting the behaviour and properties of a structure given the uncertain properties of its geometry, materials, and the actions it is supposed to withstand. This book addresses the probabilistic methods for evaluation...... of structural reliability, including the theoretical basis for these methods. Partial safety factor codes under current practice are briefly introduced and discussed. A probabilistic code format for obtaining a formal reliability evaluation system that catches the most essential features of the nature...... of the uncertainties and their interplay is the developed, step-by-step. The concepts presented are illustrated by numerous examples throughout the text....

  17. Reliability and mechanical design

    International Nuclear Information System (INIS)

    Lemaire, Maurice

    1997-01-01

    A lot of results in mechanical design are obtained from a modelisation of physical reality and from a numerical solution which would lead to the evaluation of needs and resources. The goal of the reliability analysis is to evaluate the confidence which it is possible to grant to the chosen design through the calculation of a probability of failure linked to the retained scenario. Two types of analysis are proposed: the sensitivity analysis and the reliability analysis. Approximate methods are applicable to problems related to reliability, availability, maintainability and safety (RAMS)

  18. RTE - 2013 Reliability Report

    International Nuclear Information System (INIS)

    Denis, Anne-Marie

    2014-01-01

    RTE publishes a yearly reliability report based on a standard model to facilitate comparisons and highlight long-term trends. The 2013 report is not only stating the facts of the Significant System Events (ESS), but it moreover underlines the main elements dealing with the reliability of the electrical power system. It highlights the various elements which contribute to present and future reliability and provides an overview of the interaction between the various stakeholders of the Electrical Power System on the scale of the European Interconnected Network. (author)

  19. Economic impact of world mining

    International Nuclear Information System (INIS)

    Walser, G.

    2002-01-01

    Mining plays a vital role in the economic development of many countries. The emerging economies are now major players in the production and availability of key commodities such as copper (70%), bauxite (40%), iron ore and precious metals. Mining also has a positive impact on the economy of many countries. Another impact of mining can be measured in terms of employment opportunities and income generation. Commercial scale mining provides employment and skills transfer to more than 2 million workers. The multiplier effect increases this benefit by a factor of between 2 and 5. The World Bank Mining Department has carried out an in-depth study on economic and social impact of mining at the community level in Chile, Peru, Bolivia, Papua New Guinea and Mali. This study demonstrates that there are substantial social and economic benefits to the community. The most positive cases are related to the growth of local small- and micro-enterprise activities. However, mining remains controversial, as true sustainable development is not only a matter of financial flows. Mining has also been associated with a number of economic and social problems. As a result there are questions about the sustainability of the economic outcome of mining. The contribution of mining to sustainable development needs to be considered in terms of economic and technical viability, ecological sustainability and social equity. To achieve this, governments, mining companies and local communities must work together to address these issues. (author)

  20. Service mining framework and application

    CERN Document Server

    Chang, Wei-Lun

    2014-01-01

    The shifting focus of service from the 1980s to 2000s has proved that IT not only lowers the cost of service but creates avenues to enhance and increase revenue through service. The new type of service, e-service, is mobile, flexible, interactive, and interchangeable. While service science provides an avenue for future service researches, the specific research areas from the IT perspective still need to be elaborated. This book introduces a novel concept-service mining-to address several research areas from technology, model, management, and application perspectives. Service mining is defined as "a systematical process including service discovery, service experience, service recovery, and service retention to discover unique patterns and exceptional values within the existing services." The goal of service mining is similar to data mining, text mining, or web mining, and aims to "detect something new" from the service pool. The major difference is the feature of service is quite distinct from the mining targe...

  1. Steam coal mines of tomorrow

    Energy Technology Data Exchange (ETDEWEB)

    McCloskey, G

    1986-07-01

    A comprehensive review of new steam coal mines being planned or developed worldwide. It shows that at least 20 major mines with a combined annual output of 110 million tonnes per annum, could add their coal to world markets in the next 10 years. The review highlights: substantial activity in Australia with at least four major mines at advanced planning stages; a strengthening of the South American export industry with 4 major mines operating in 10 years compared with just one today; no major export mines being developed in the traditional US mining areas; and the emergence of Indonesia as a major steam coal producer/exporter. The review also shows a reduction in cost/output ratios, and also the proximity of the new mines to existing infrastructure (e.g. export terminals, rail links).

  2. Approach to reliability assessment

    International Nuclear Information System (INIS)

    Green, A.E.; Bourne, A.J.

    1975-01-01

    Experience has shown that reliability assessments can play an important role in the early design and subsequent operation of technological systems where reliability is at a premium. The approaches to and techniques for such assessments, which have been outlined in the paper, have been successfully applied in variety of applications ranging from individual equipments to large and complex systems. The general approach involves the logical and systematic establishment of the purpose, performance requirements and reliability criteria of systems. This is followed by an appraisal of likely system achievment based on the understanding of different types of variational behavior. A fundamental reliability model emerges from the correlation between the appropriate Q and H functions for performance requirement and achievement. This model may cover the complete spectrum of performance behavior in all the system dimensions

  3. The rating reliability calculator

    Directory of Open Access Journals (Sweden)

    Solomon David J

    2004-04-01

    Full Text Available Abstract Background Rating scales form an important means of gathering evaluation data. Since important decisions are often based on these evaluations, determining the reliability of rating data can be critical. Most commonly used methods of estimating reliability require a complete set of ratings i.e. every subject being rated must be rated by each judge. Over fifty years ago Ebel described an algorithm for estimating the reliability of ratings based on incomplete data. While his article has been widely cited over the years, software based on the algorithm is not readily available. This paper describes an easy-to-use Web-based utility for estimating the reliability of ratings based on incomplete data using Ebel's algorithm. Methods The program is available public use on our server and the source code is freely available under GNU General Public License. The utility is written in PHP, a common open source imbedded scripting language. The rating data can be entered in a convenient format on the user's personal computer that the program will upload to the server for calculating the reliability and other statistics describing the ratings. Results When the program is run it displays the reliability, number of subject rated, harmonic mean number of judges rating each subject, the mean and standard deviation of the averaged ratings per subject. The program also displays the mean, standard deviation and number of ratings for each subject rated. Additionally the program will estimate the reliability of an average of a number of ratings for each subject via the Spearman-Brown prophecy formula. Conclusion This simple web-based program provides a convenient means of estimating the reliability of rating data without the need to conduct special studies in order to provide complete rating data. I would welcome other researchers revising and enhancing the program.

  4. Structural systems reliability analysis

    International Nuclear Information System (INIS)

    Frangopol, D.

    1975-01-01

    For an exact evaluation of the reliability of a structure it appears necessary to determine the distribution densities of the loads and resistances and to calculate the correlation coefficients between loads and between resistances. These statistical characteristics can be obtained only on the basis of a long activity period. In case that such studies are missing the statistical properties formulated here give upper and lower bounds of the reliability. (orig./HP) [de

  5. Reliability and maintainability

    International Nuclear Information System (INIS)

    1994-01-01

    Several communications in this conference are concerned with nuclear plant reliability and maintainability; their titles are: maintenance optimization of stand-by Diesels of 900 MW nuclear power plants; CLAIRE: an event-based simulation tool for software testing; reliability as one important issue within the periodic safety review of nuclear power plants; design of nuclear building ventilation by the means of functional analysis; operation characteristic analysis for a power industry plant park, as a function of influence parameters

  6. Reliability data book

    International Nuclear Information System (INIS)

    Bento, J.P.; Boerje, S.; Ericsson, G.; Hasler, A.; Lyden, C.O.; Wallin, L.; Poern, K.; Aakerlund, O.

    1985-01-01

    The main objective for the report is to improve failure data for reliability calculations as parts of safety analyses for Swedish nuclear power plants. The work is based primarily on evaluations of failure reports as well as information provided by the operation and maintenance staff of each plant. In the report are presented charts of reliability data for: pumps, valves, control rods/rod drives, electrical components, and instruments. (L.E.)

  7. Investigation of radon-222 emissions from underground uranium mines. Progress report No. 2

    International Nuclear Information System (INIS)

    Jackson, P.O.; Glissmeyer, J.A.; Enderlin, W.I.; Schwendiman, L.C.; Wogman, N.A.; Perkins, R.W.

    1980-02-01

    A reliable estimate of radon emissions to the environment from underground uranium mines was obtained through measurements of radon in ventilation exhaust air at 24 uranium mines and estimates of radon release from ore piles and waste piles at mines and in water pumped from mines. Three additional mines sampled in 1978 but not in 1979 were included in the overall results. Total production of U 3 O 8 from the mines thus far sampled represent about 63% of total 1978 US production from underground mines. Wide variation in radon emission per unit of production was shown from mine to mine; hence, it became necessary to sum all radon from all mines measured and divide by the sum of all U 3 O 8 production in 1978 from these mines to arrive at a valid estimate of Ci per ton of U 3 O 8 . This value was found to be 26.7 per ton or 5400 Ci/RRY (182 metric tons). The radon emitted in mine ventilation air was by far the dominant source, with other than ventilation exhaust sources accounting for less than three percent of radon in ventilation exhaust. Other observations of interest in this study were the diurnal fluctuations of radon with barometric pressure and the statistically significant relationship between radon released per year from a mine and the cumulative ore production at the time of radon measurement. The linear relationship between Ci/yr of radon and cumulative ore accounted for about half the variability.Several sources of random errors and possible biases were evaluated using some simple descriptive statistics insofar as the current data permitted. Errors in air flow rate in the vents sampled, fluctuations in radon emission with time of day, counting instrument calibration and production rate were estimated and combined to give an uncertainty of about +- 24 percent at the 95 percent confidence level

  8. Multidisciplinary System Reliability Analysis

    Science.gov (United States)

    Mahadevan, Sankaran; Han, Song; Chamis, Christos C. (Technical Monitor)

    2001-01-01

    The objective of this study is to develop a new methodology for estimating the reliability of engineering systems that encompass multiple disciplines. The methodology is formulated in the context of the NESSUS probabilistic structural analysis code, developed under the leadership of NASA Glenn Research Center. The NESSUS code has been successfully applied to the reliability estimation of a variety of structural engineering systems. This study examines whether the features of NESSUS could be used to investigate the reliability of systems in other disciplines such as heat transfer, fluid mechanics, electrical circuits etc., without considerable programming effort specific to each discipline. In this study, the mechanical equivalence between system behavior models in different disciplines are investigated to achieve this objective. A new methodology is presented for the analysis of heat transfer, fluid flow, and electrical circuit problems using the structural analysis routines within NESSUS, by utilizing the equivalence between the computational quantities in different disciplines. This technique is integrated with the fast probability integration and system reliability techniques within the NESSUS code, to successfully compute the system reliability of multidisciplinary systems. Traditional as well as progressive failure analysis methods for system reliability estimation are demonstrated, through a numerical example of a heat exchanger system involving failure modes in structural, heat transfer and fluid flow disciplines.

  9. Analysis and Application of Reliability

    International Nuclear Information System (INIS)

    Jeong, Hae Seong; Park, Dong Ho; Kim, Jae Ju

    1999-05-01

    This book tells of analysis and application of reliability, which includes definition, importance and historical background of reliability, function of reliability and failure rate, life distribution and assumption of reliability, reliability of unrepaired system, reliability of repairable system, sampling test of reliability, failure analysis like failure analysis by FEMA and FTA, and cases, accelerated life testing such as basic conception, acceleration and acceleration factor, and analysis of accelerated life testing data, maintenance policy about alternation and inspection.

  10. Geotechnical Characterization of Mined Clay from Appalachian Ohio: Challenges and Implications for the Clay Mining Industry

    Science.gov (United States)

    Moran, Anthony R.; Hettiarachchi, Hiroshan

    2011-01-01

    Clayey soil found in coal mines in Appalachian Ohio is often sold to landfills for constructing Recompacted Soil Liners (RSL) in landfills. Since clayey soils possess low hydraulic conductivity, the suitability of mined clay for RSL in Ohio is first assessed by determining its clay content. When soil samples are tested in a laboratory, the same engineering properties are typically expected for the soils originated from the same source, provided that the testing techniques applied are standard, but mined clay from Appalachian Ohio has shown drastic differences in particle size distribution depending on the sampling and/or laboratory processing methods. Sometimes more than a 10 percent decrease in the clay content is observed in the samples collected at the stockpiles, compared to those collected through reverse circulation drilling. This discrepancy poses a challenge to geotechnical engineers who work on the prequalification process of RSL material as it can result in misleading estimates of the hydraulic conductivity of the samples. This paper describes a laboratory investigation conducted on mined clay from Appalachian Ohio to determine how and why the standard sampling and/or processing methods can affect the grain-size distributions. The variation in the clay content was determined to be due to heavy concentrations of shale fragments in the clayey soils. It was also concluded that, in order to obtain reliable grain size distributions from the samples collected at a stockpile of mined clay, the material needs to be processed using a soil grinder. Otherwise, the samples should be collected through drilling. PMID:21845150

  11. Geotechnical Characterization of Mined Clay from Appalachian Ohio: Challenges and Implications for the Clay Mining Industry

    Directory of Open Access Journals (Sweden)

    Anthony R. Moran

    2011-06-01

    Full Text Available Clayey soil found in coal mines in Appalachian Ohio is often sold to landfills for constructing Recompacted Soil Liners (RSL in landfills. Since clayey soils possess low hydraulic conductivity, the suitability of mined clay for RSL in Ohio is first assessed by determining its clay content. When soil samples are tested in a laboratory, the same engineering properties are typically expected for the soils originated from the same source, provided that the testing techniques applied are standard, but mined clay from Appalachian Ohio has shown drastic differences in particle size distribution depending on the sampling and/or laboratory processing methods. Sometimes more than a 10 percent decrease in the clay content is observed in the samples collected at the stockpiles, compared to those collected through reverse circulation drilling. This discrepancy poses a challenge to geotechnical engineers who work on the prequalification process of RSL material as it can result in misleading estimates of the hydraulic conductivity of the samples. This paper describes a laboratory investigation conducted on mined clay from Appalachian Ohio to determine how and why the standard sampling and/or processing methods can affect the grain-size distributions. The variation in the clay content was determined to be due to heavy concentrations of shale fragments in the clayey soils. It was also concluded that, in order to obtain reliable grain size distributions from the samples collected at a stockpile of mined clay, the material needs to be processed using a soil grinder. Otherwise, the samples should be collected through drilling.

  12. Mining with microbes

    International Nuclear Information System (INIS)

    Rawlings., D.E.; Silver, S.

    1995-01-01

    Microbes are playing increasingly important roles in commercial mining operations, where they are being used in the open-quotes bioleachingclose quotes of copper, uranium, and gold ores. Direct leaching is when microbial metabolism changes the redox state of the metal being harvested, rendering it more soluble. Indirect leaching includes redox chemistry of other metal cations that are then coupled in chemical oxidation or reduction of the harvested metal ion and microbial attack upon and solubilization of the mineral matrix in which the metal is physically embedded. In addition, bacterial cells are used to detoxify the waste cyanide solution from gold-mining operations and as open-quotes absorbantsclose quotes of the mineral cations. Bacterial cells may replace activated carbon or alternative biomass. With an increasing understanding of microbial physiology, biochemistry and molecular genetics, rational approaches to improving these microbial activities become possible. 40 refs., 3 figs

  13. Action Rules Mining

    CERN Document Server

    Dardzinska, Agnieszka

    2013-01-01

    We are surrounded by data, numerical, categorical and otherwise, which must to be analyzed and processed to convert it into information that instructs, answers or aids understanding and decision making. Data analysts in many disciplines such as business, education or medicine, are frequently asked to analyze new data sets which are often composed of numerous tables possessing different properties. They try to find completely new correlations between attributes and show new possibilities for users.   Action rules mining discusses some of data mining and knowledge discovery principles and then describe representative concepts, methods and algorithms connected with action. The author introduces the formal definition of action rule, notion of a simple association action rule and a representative action rule, the cost of association action rule, and gives a strategy how to construct simple association action rules of a lowest cost. A new approach for generating action rules from datasets with numerical attributes...

  14. Ontario's uranium mining industry

    International Nuclear Information System (INIS)

    Runnalls, O.J.C.

    1981-01-01

    This report traces the Ontario uranium mining industry from the first discovery of uranium north of Sault Ste. Marie through the uranium boom of the 1950's when Elliot Lake and Bancroft were developed, the cutbacks of the 1960s, the renewed enthusiasm in exploration and development of the 1970s to the current position when continued production for the domestic market is assured. Ontario, with developed mines and operational expertise, will be in a position to compete for export markets as they reopen. The low level of expenditures for uranium exploration and the lack of new discoveries are noted. The report also reviews and places in perspective the development of policies and regulations governing the industry and the jurisdictional relationships of the Federal and Provincial governments

  15. The Bitcoin Mining Game

    Directory of Open Access Journals (Sweden)

    Nicolas Houy

    2016-12-01

    Full Text Available This article deals with the mining incentives in the Bitcoin protocol. The mining process is used to confirm and secure transactions. This process is organized as a speed game between individuals or firms – the miners – with different computational powers to solve a mathematical problem, bring a proof of work, spread their solution and reach consensus among the Bitcoin network nodes with it. First, we define and specify this game. Second, we analytically find its Nash equilibria in the two-player case. We analyze the parameters for which the miners would face the proper incentives to fulfill their function of transaction processors in the current situation. Finally, we study the block space market offer.

  16. Realtime mine ventilation simulation

    International Nuclear Information System (INIS)

    McDaniel, K.H.

    1997-01-01

    This paper describes the development of a Windows based, interactive mine ventilation simulation software program at the Waste Isolation Pilot Plant (WIPP). To enhance the operation of the underground ventilation system, Westinghouse Electric Corporation developed the program called WIPPVENT. While WIPPVENT includes most of the functions of the commercially available simulation program VNETPC and uses the same subroutine to calculate airflow distributions, the user interface has been completely rewritten as a Windows application with screen graphics. WIPPVENT is designed to interact with WIPP ventilation monitoring systems through the sitewise Central monitoring System. Data can be continuously collected from the Underground Ventilation Remote Monitoring and Control System (e.g., air quantity and differential pressure) and the Mine Weather Stations (psychrometric data). Furthermore, WIPPVENT incorporates regulator characteristic curves specific to the site. The program utilizes this data to create and continuously update a REAL-TIME ventilation model. This paper discusses the design, key features, and interactive capabilities of WIPPVENT

  17. Multispectral image feature fusion for detecting land mines

    Energy Technology Data Exchange (ETDEWEB)

    Clark, G.A.; Fields, D.J.; Sherwood, R.J. [Lawrence Livermore National Lab., CA (United States)] [and others

    1994-11-15

    Our system fuses information contained in registered images from multiple sensors to reduce the effect of clutter and improve the the ability to detect surface and buried land mines. The sensor suite currently consists if a camera that acquires images in sixible wavelength bands, du, dual-band infrared (5 micron and 10 micron) and ground penetrating radar. Past research has shown that it is extremely difficult to distinguish land mines from background clutter in images obtained from a single sensor. It is hypothesized, however, that information fused from a suite of various sensors is likely to provide better detection reliability, because the suite of sensors detects a variety of physical properties that are more separate in feature space. The materials surrounding the mines can include natural materials (soil, rocks, foliage, water, holes made by animals and natural processes, etc.) and some artifacts.

  18. Simulating the Various Subsystems of a Coal Mine

    Directory of Open Access Journals (Sweden)

    V. Okolnishnikov

    2016-06-01

    Full Text Available A set of simulation models of various subsystems of a coal mine was developed with the help of a new visual interactive simulation system of technological processes. This paper contains a brief description of this simulation system and its possibilities. The main possibilities provided by the simulation system are: the quick construction of models from library elements, 3D representation, and the communication of models with actual control systems. These simulation models were developed for the simulation of various subsystems of a coal mine: underground conveyor network subsystems, pumping subsystems and coal face subsystems. These simulation models were developed with the goal to be used as a quality and reliability assurance tool for new process control systems in coal mining.

  19. Mine Waste Disposal and Managements

    Energy Technology Data Exchange (ETDEWEB)

    Cheong, Young-Wook; Min, Jeong-Sik; Kwon, Kwang-Soo [Korea Institute of Geology Mining and Materials, Taejon (KR)] (and others)

    1999-12-01

    This research project deals with: Analysis and characterization of mine waste piles or tailings impoundment abandoned in mining areas; Survey of mining environmental pollution from mine waste impounds; Modelling of pollutants in groundwater around tailings impoundment; Demonstration of acid rock drainage from coal mine waste rock piles and experiment of seeding on waste rock surface; Development of a liner using tailings. Most of mine wastes are deposited on natural ground without artificial liners and capping for preventing contamination of groundwater around mine waste piles or containments. In case of some mine waste piles or containments, pollutants have been released to the environment, and several constituents in drainage exceed the limit of discharge from landfill site. Metals found in drainage exist in exchangeable fraction in waste rock and tailings. This means that if when it rains to mine waste containments, mine wastes can be pollutant to the environment by release of acidity and metals. As a result of simulation for hydraulic potentials and groundwater flow paths within the tailings, the simulated travel paths correlated well with the observed contaminant distribution. The plum disperse, both longitudinal and transverse dimensions, with time. Therefore liner system is a very important component in tailings containment system. As experimental results of liner development using tailings, tailings mixed with some portion of resin or cement may be used for liner because tailings with some additives have a very low hydraulic conductivity. (author). 39 refs.

  20. Health in uranium mining

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1964-01-15

    Safety in mining radioactive ores, and in milling and treating them, has been a serious preoccupation for some thirty years. Much earlier than this, however, a high incidence of lung cancer had been reported among the miners of the Erzgebirge mountains in the German-Czechoslovak border region (places familiar under the names of Schneeberg and St. Joachims thai). Investigations into deaths from radium poisoning began at these mines in 1937, and the results seemed to indicate a causal connection between the radioactive substances and the development of lung cancer and other diseases. These matters were discussed in Vienna at the symposium on Radiological Health and Safety in Nuclear Materials Mining and Milling, 26-31 August 1963. The symposium was organized by IAEA and co-sponsored by ILO and WHO; some 70 papers were presented. The purpose of the meeting was to collect and compare the very widely scattered research results and practical experience in this field. One conclusion which emerged was that the milling of uranium ore involves no unusual problem. Provided standard controls - as applied to the treatment of other minerals - are strictly enforced, exposure to radiation can be kept to a minimum. In the actual mining of uranium, the problems are only beginning to be clearly defined, but it seems to be well established that exposure of miners to excessive levels of radon will have most serious consequences. In a complicated pattern there are many factors at work, ranging from the physical behaviour of sundry radioactive substances to the personal histories of individual miners. The need for considerably more research was stressed throughout the discussions.

  1. Health in uranium mining

    International Nuclear Information System (INIS)

    1964-01-01

    Safety in mining radioactive ores, and in milling and treating them, has been a serious preoccupation for some thirty years. Much earlier than this, however, a high incidence of lung cancer had been reported among the miners of the Erzgebirge mountains in the German-Czechoslovak border region (places familiar under the names of Schneeberg and St. Joachims thai). Investigations into deaths from radium poisoning began at these mines in 1937, and the results seemed to indicate a causal connection between the radioactive substances and the development of lung cancer and other diseases. These matters were discussed in Vienna at the symposium on Radiological Health and Safety in Nuclear Materials Mining and Milling, 26-31 August 1963. The symposium was organized by IAEA and co-sponsored by ILO and WHO; some 70 papers were presented. The purpose of the meeting was to collect and compare the very widely scattered research results and practical experience in this field. One conclusion which emerged was that the milling of uranium ore involves no unusual problem. Provided standard controls - as applied to the treatment of other minerals - are strictly enforced, exposure to radiation can be kept to a minimum. In the actual mining of uranium, the problems are only beginning to be clearly defined, but it seems to be well established that exposure of miners to excessive levels of radon will have most serious consequences. In a complicated pattern there are many factors at work, ranging from the physical behaviour of sundry radioactive substances to the personal histories of individual miners. The need for considerably more research was stressed throughout the discussions.

  2. Uranium mining in Australia

    International Nuclear Information System (INIS)

    Mackay, G.A.

    1978-01-01

    Western world requirements for uranium based on increasing energy consumption and a changing energy mix, will warrant the development of Australia's resources. By 1985 Australian mines could be producing 9500 tonnes of uranium oxide yearly and by 1995 the export value from uranium could reach that from wool. In terms of benefit to the community the economic rewards are considerable but, in terms of providing energy to the world, Australias uranium is vital

  3. Special survey: mining industry

    International Nuclear Information System (INIS)

    Preece, H.

    1981-01-01

    South Africa is now the world's second biggest producer of non-oil minerals after the United States and far ahead of Canada and Australia, according to the author. South Africa's economic growth prospects over the 1980's are inevitably crucially dependent on the mining industry. The production and economics of various minerals are discussed, with special reference to gold, coal, diamonds, uranium, platinum, manganese, copper and asbestos

  4. Data Mining and Analysis

    Science.gov (United States)

    Samms, Kevin O.

    2015-01-01

    The Data Mining project seeks to bring the capability of data visualization to NASA anomaly and problem reporting systems for the purpose of improving data trending, evaluations, and analyses. Currently NASA systems are tailored to meet the specific needs of its organizations. This tailoring has led to a variety of nomenclatures and levels of annotation for procedures, parts, and anomalies making difficult the realization of the common causes for anomalies. Making significant observations and realizing the connection between these causes without a common way to view large data sets is difficult to impossible. In the first phase of the Data Mining project a portal was created to present a common visualization of normalized sensitive data to customers with the appropriate security access. The tool of the visualization itself was also developed and fine-tuned. In the second phase of the project we took on the difficult task of searching and analyzing the target data set for common causes between anomalies. In the final part of the second phase we have learned more about how much of the analysis work will be the job of the Data Mining team, how to perform that work, and how that work may be used by different customers in different ways. In this paper I detail how our perspective has changed after gaining more insight into how the customers wish to interact with the output and how that has changed the product.

  5. Organizational Data Mining

    Science.gov (United States)

    Nemati, Hamid R.; Barko, Christopher D.

    Many organizations today possess substantial quantities of business information but have very little real business knowledge. A recent survey of 450 business executives reported that managerial intuition and instinct are more prevalent than hard facts in driving organizational decisions. To reverse this trend, businesses of all sizes would be well advised to adopt Organizational Data Mining (ODM). ODM is defined as leveraging Data Mining tools and technologies to enhance the decision-making process by transforming data into valuable and actionable knowledge to gain a competitive advantage. ODM has helped many organizations optimize internal resource allocations while better understanding and responding to the needs of their customers. The fundamental aspects of ODM can be categorized into Artificial Intelligence (AI), Information Technology (IT), and Organizational Theory (OT), with OT being the key distinction between ODM and Data Mining. In this chapter, we introduce ODM, explain its unique characteristics, and report on the current status of ODM research. Next we illustrate how several leading organizations have adopted ODM and are benefiting from it. Then we examine the evolution of ODM to the present day and conclude our chapter by contemplating ODM's challenging yet opportunistic future.

  6. Coal mine subsidence

    International Nuclear Information System (INIS)

    Darmody, R.G.; Hetzler, R.T.; Simmons, F.W.

    1992-01-01

    Longwall coal mining in southern Illinois occurs beneath some of the best agricultural land in the U.S. This region is characterized by highly productive, nearly level, and somewhat poorly drained soils. Subsidence from longwall mining causes changes in surface topography which alters surface and subsurface hydrology. These changes can adversely affect agricultural land by creating wet or ponded areas that can be deleterious to crop production. While most subsided areas show little impact from subsidence, some areas experience total crop failure. Coal companies are required by law to mitigate subsidence damage to cropland. The objective of this paper is to test the effectiveness of mitigation in restoring grain yields to their pre-mined levels. The research was conducted on sites selected to represent conventional mitigation techniques on the predominate soils in the area. Corn (Zea mays L.) and soybean [Glycine max.(L.) Merr] yields in 1988, 1989, 1990, and 1991 from mitigated areas were compared to yields from nearby undisturbed areas

  7. Health in mines

    Energy Technology Data Exchange (ETDEWEB)

    Breuer, H

    1978-01-01

    This report summarizes the information gained from research carried out under the five-year programme (1971-1976) relating to health in mines. This programme concentrates on technical means of dust control, and the various aspects of this topic are reviewed. The purpose of the epidemiology of pneumoconiosis is to determine the origin and development of this endemic disease with a view to formulating a policy of worker protection. The constituents of dust and their possible influences are studied. Measuring and determining the characteristics of dusts are the subject of the second group of research projects. Prevention techniques have been proposed, tried out and developed, thus providing the mining industry with a set of dust control methods. water infusion, dedusting on coal-getting and heading machines, control of dust produced by caving, etc. A chapter devoted to iron ore mines discusses means of protection against noxious emissions from Diesel engines and explosives. (Editions available in English, in German, in French, in Italian, and in Dutch)

  8. Safety and reliability criteria

    International Nuclear Information System (INIS)

    O'Neil, R.

    1978-01-01

    Nuclear power plants and, in particular, reactor pressure boundary components have unique reliability requirements, in that usually no significant redundancy is possible, and a single failure can give rise to possible widespread core damage and fission product release. Reliability may be required for availability or safety reasons, but in the case of the pressure boundary and certain other systems safety may dominate. Possible Safety and Reliability (S and R) criteria are proposed which would produce acceptable reactor design. Without some S and R requirement the designer has no way of knowing how far he must go in analysing his system or component, or whether his proposed solution is likely to gain acceptance. The paper shows how reliability targets for given components and systems can be individually considered against the derived S and R criteria at the design and construction stage. Since in the case of nuclear pressure boundary components there is often very little direct experience on which to base reliability studies, relevant non-nuclear experience is examined. (author)

  9. Proposed reliability cost model

    Science.gov (United States)

    Delionback, L. M.

    1973-01-01

    The research investigations which were involved in the study include: cost analysis/allocation, reliability and product assurance, forecasting methodology, systems analysis, and model-building. This is a classic example of an interdisciplinary problem, since the model-building requirements include the need for understanding and communication between technical disciplines on one hand, and the financial/accounting skill categories on the other. The systems approach is utilized within this context to establish a clearer and more objective relationship between reliability assurance and the subcategories (or subelements) that provide, or reenforce, the reliability assurance for a system. Subcategories are further subdivided as illustrated by a tree diagram. The reliability assurance elements can be seen to be potential alternative strategies, or approaches, depending on the specific goals/objectives of the trade studies. The scope was limited to the establishment of a proposed reliability cost-model format. The model format/approach is dependent upon the use of a series of subsystem-oriented CER's and sometimes possible CTR's, in devising a suitable cost-effective policy.

  10. Research on Occupational Safety, Health Management and Risk Control Technology in Coal Mines.

    Science.gov (United States)

    Zhou, Lu-Jie; Cao, Qing-Gui; Yu, Kai; Wang, Lin-Lin; Wang, Hai-Bin

    2018-04-26

    This paper studies the occupational safety and health management methods as well as risk control technology associated with the coal mining industry, including daily management of occupational safety and health, identification and assessment of risks, early warning and dynamic monitoring of risks, etc.; also, a B/S mode software (Geting Coal Mine, Jining, Shandong, China), i.e., Coal Mine Occupational Safety and Health Management and Risk Control System, is developed to attain the aforementioned objectives, namely promoting the coal mine occupational safety and health management based on early warning and dynamic monitoring of risks. Furthermore, the practical effectiveness and the associated pattern for applying this software package to coal mining is analyzed. The study indicates that the presently developed coal mine occupational safety and health management and risk control technology and the associated software can support the occupational safety and health management efforts in coal mines in a standardized and effective manner. It can also control the accident risks scientifically and effectively; its effective implementation can further improve the coal mine occupational safety and health management mechanism, and further enhance the risk management approaches. Besides, its implementation indicates that the occupational safety and health management and risk control technology has been established based on a benign cycle involving dynamic feedback and scientific development, which can provide a reliable assurance to the safe operation of coal mines.

  11. Mining technology and policy issues 1983

    International Nuclear Information System (INIS)

    Anon.

    1983-01-01

    This book presents conference papers on advances in mineral processing, coal mining, communications for mining executives, environmental laws and regulations, exploration philosophy, exploration technology, government controls and the environment, management, mine finance, minerals availability, mine safety, occupational health, open pit mining, the precious metals outlook, public lands, system improvements in processing ores, and underground mining. Topics considered include coal pipelines and saline water, an incentive program for coal mines, sandwich belt high-angle conveyors, the development of a mining company, regulations for radionuclides, contracts for western coal production for Pacific Rim exports, and the control of radon daughters in underground mines

  12. Imouraren mining exploitation : Complementary studies Synthetic report Volum B - Mines

    International Nuclear Information System (INIS)

    1980-01-01

    The object of the current study is to determine the main technical characteristics of the reference project of a mine that can supply the necessary ore quantity at a production of 3000 tonnes uranium per year, along 10 years. The project is one of the possible solutions for exploiting the mine. The current study permits to establish : investment and functioning cost estimation, overall project of the mining exploitation program, necessary strength estimation, average ore grades evaluation and variations of these grades, utilities needs, production vizing program, main exploitation methods and necessary materials. Reference project study of the mine serves as base to the economics studies and studies optimization [fr

  13. Economics of mining law

    Science.gov (United States)

    Long, K.R.

    1995-01-01

    Modern mining law, by facilitating socially and environmentally acceptable exploration, development, and production of mineral materials, helps secure the benefits of mineral production while minimizing environmental harm and accounting for increasing land-use competition. Mining investments are sunk costs, irreversibly tied to a particular mineral site, and require many years to recoup. Providing security of tenure is the most critical element of a practical mining law. Governments owning mineral rights have a conflict of interest between their roles as a profit-maximizing landowner and as a guardian of public welfare. As a monopoly supplier, governments have considerable power to manipulate mineral-rights markets. To avoid monopoly rent-seeking by governments, a competitive market for government-owned mineral rights must be created by artifice. What mining firms will pay for mineral rights depends on expected exploration success and extraction costs. Landowners and mining firms will negotlate respective shares of anticipated differential rents, usually allowing for some form of risk sharing. Private landowners do not normally account for external benefits or costs of minerals use. Government ownership of mineral rights allows for direct accounting of social prices for mineral-bearing lands and external costs. An equitable and efficient method is to charge an appropriate reservation price for surface land use, net of the value of land after reclamation, and to recover all or part of differential rents through a flat income or resource-rent tax. The traditional royalty on gross value of production, essentially a regressive income tax, cannot recover as much rent as a flat income tax, causes arbitrary mineral-reserve sterilization, and creates a bias toward development on the extensive margin where marginal environmental costs are higher. Mitigating environmental costs and resolving land-use conflicts require local evaluation and planning. National oversight ensures

  14. Mining highly stressed areas, part 2.

    CSIR Research Space (South Africa)

    Johnson, R

    1995-12-01

    Full Text Available A questionnaire related to mining at great depth and in very high stress conditions has been completed with the assistance of mine rock mechanics personnel on over twenty mines in all mining districts, and covering all deep level mines...

  15. 36 CFR 6.7 - Mining wastes.

    Science.gov (United States)

    2010-07-01

    ... 36 Parks, Forests, and Public Property 1 2010-07-01 2010-07-01 false Mining wastes. 6.7 Section 6... DISPOSAL SITES IN UNITS OF THE NATIONAL PARK SYSTEM § 6.7 Mining wastes. (a) Solid waste from mining includes but is not limited to mining overburden, mining byproducts, solid waste from the extraction...

  16. Determine Appropriate Post Mining Land Use in Indonesia Coal Mining Using Land Suitability Evaluation

    OpenAIRE

    Maryati, Sri; Shimada, Hideki; Hamanaka, Akihiro; Sasaoka, Takashi; Matsui, Kikuo

    2012-01-01

    Coal mining industry gives many benefits for Indonesia including contribution in total Indonesian GDP. Most of coal mines in Indonesia are open pit mining method which disturbs large area of land. One of open pit mining impact is damage land and related to soil erosion occurrences it will degrade land by top soil loses. Indonesia Government has issued mine closure regulation to encourage mining industry provide post mining land use. Determination of post mining land use should be considering ...

  17. Reliability Centered Maintenance - Methodologies

    Science.gov (United States)

    Kammerer, Catherine C.

    2009-01-01

    Journal article about Reliability Centered Maintenance (RCM) methodologies used by United Space Alliance, LLC (USA) in support of the Space Shuttle Program at Kennedy Space Center. The USA Reliability Centered Maintenance program differs from traditional RCM programs because various methodologies are utilized to take advantage of their respective strengths for each application. Based on operational experience, USA has customized the traditional RCM methodology into a streamlined lean logic path and has implemented the use of statistical tools to drive the process. USA RCM has integrated many of the L6S tools into both RCM methodologies. The tools utilized in the Measure, Analyze, and Improve phases of a Lean Six Sigma project lend themselves to application in the RCM process. All USA RCM methodologies meet the requirements defined in SAE JA 1011, Evaluation Criteria for Reliability-Centered Maintenance (RCM) Processes. The proposed article explores these methodologies.

  18. Issues in cognitive reliability

    International Nuclear Information System (INIS)

    Woods, D.D.; Hitchler, M.J.; Rumancik, J.A.

    1984-01-01

    This chapter examines some problems in current methods to assess reactor operator reliability at cognitive tasks and discusses new approaches to solve these problems. The two types of human failures are errors in the execution of an intention and errors in the formation/selection of an intention. Topics considered include the types of description, error correction, cognitive performance and response time, the speed-accuracy tradeoff function, function based task analysis, and cognitive task analysis. One problem of human reliability analysis (HRA) techniques in general is the question of what are the units of behavior whose reliability are to be determined. A second problem for HRA is that people often detect and correct their errors. The use of function based analysis, which maps the problem space for plant control, is recommended

  19. Data mining for bioinformatics applications

    CERN Document Server

    Zengyou, He

    2015-01-01

    Data Mining for Bioinformatics Applications provides valuable information on the data mining methods have been widely used for solving real bioinformatics problems, including problem definition, data collection, data preprocessing, modeling, and validation. The text uses an example-based method to illustrate how to apply data mining techniques to solve real bioinformatics problems, containing 45 bioinformatics problems that have been investigated in recent research. For each example, the entire data mining process is described, ranging from data preprocessing to modeling and result validation. Provides valuable information on the data mining methods have been widely used for solving real bioinformatics problems Uses an example-based method to illustrate how to apply data mining techniques to solve real bioinformatics problems Contains 45 bioinformatics problems that have been investigated in recent research.

  20. Mine waters: Acidic to circumneutral

    Science.gov (United States)

    Nordstrom, D. Kirk

    2011-01-01

    Acid mine waters, often containing toxic concentrations of Fe, Al, Cu, Zn, Cd, Pb, Ni, Co, and Cr, can be produced from the mining of coal and metallic deposits. Values of pH for acid mine waters can range from –3.5 to 5, but even circumneutral (pH ≈ 7) mine waters can have high concentrations of As, Sb, Mo, U, and F. When mine waters are discharged into streams, lakes, and the oceans, serious degradation of water quality and injury to aquatic life can ensue, especially when tailings impoundments break suddenly. The main acid-producing process is the exposure of pyrite to air and water, which promotes oxidative dissolution, a reaction catalyzed by microbes. Current and future mining should plan for the prevention and remediation of these contaminant discharges by the application of hydrogeochemical principles and available technologies, which might include remining and recycling of waste materials.

  1. Coal mine subsidence and structures

    International Nuclear Information System (INIS)

    Gray, R.E.

    1988-01-01

    Underground coal mining has occurred beneath 32 x 10 9 m 2 (8 million acres) of land in the United States and will eventually extend beneath 162 x 10 9 m 2 (40 million acres). Most of this mining has taken place and will take place in the eastern half of the United States. In areas of abandoned mines where total extraction was not achieved, roof collapse, crushing of coal pillars, or punching of coal pillars into softer mine floor or roof rock is now resulting in sinkhole or trough subsidence tens or even hundreds of years after mining. Difference in geology, in mining, and building construction practice between Europe and the United States preclude direct transfer of European subsidence engineering experience. Building damage cannot be related simply to tensile and compressive strains at the ground surface. Recognition of the subsidence damage role played by ground-structure interaction and by structural details is needed

  2. Data Mining Aplications in Livestock

    Directory of Open Access Journals (Sweden)

    Feyza ALEV ÇETİN

    2016-03-01

    Full Text Available Data mining provides discovering the required and applicable knowledge from very large amounts of information collected in one centre. Data mining has been used in the information industry and society. Although many methods of data mining has been used, these techniques has been remarkable in animal husbandry in recent years. For the solution of complex problems in animal husbandry many methods were discussed and developed. Brief information on data mining techniques such as k-means approach, k-nearest neighbor approach, multivariate adaptive regression function (MARS, naive Bayesian classifiers (NBC, artificial neural networks (ANN, support vector machines (SVM, decision trees are given in the study. Some data mining methods are presented and examples of the application of data mining in the field of animal husbandry in the world are provided with this study.

  3. Spatio-Temporal Rule Mining

    DEFF Research Database (Denmark)

    Gidofalvi, Gyozo; Pedersen, Torben Bach

    2005-01-01

    Recent advances in communication and information technology, such as the increasing accuracy of GPS technology and the miniaturization of wireless communication devices pave the road for Location-Based Services (LBS). To achieve high quality for such services, spatio-temporal data mining techniques...... are needed. In this paper, we describe experiences with spatio-temporal rule mining in a Danish data mining company. First, a number of real world spatio-temporal data sets are described, leading to a taxonomy of spatio-temporal data. Second, the paper describes a general methodology that transforms...... the spatio-temporal rule mining task to the traditional market basket analysis task and applies it to the described data sets, enabling traditional association rule mining methods to discover spatio-temporal rules for LBS. Finally, unique issues in spatio-temporal rule mining are identified and discussed....

  4. Reliability issues in PACS

    Science.gov (United States)

    Taira, Ricky K.; Chan, Kelby K.; Stewart, Brent K.; Weinberg, Wolfram S.

    1991-07-01

    Reliability is an increasing concern when moving PACS from the experimental laboratory to the clinical environment. Any system downtime may seriously affect patient care. The authors report on the several classes of errors encountered during the pre-clinical release of the PACS during the past several months and present the solutions implemented to handle them. The reliability issues discussed include: (1) environmental precautions, (2) database backups, (3) monitor routines of critical resources and processes, (4) hardware redundancy (networks, archives), and (5) development of a PACS quality control program.

  5. Reliability Parts Derating Guidelines

    Science.gov (United States)

    1982-06-01

    226-30, October 1974. 66 I, 26. "Reliability of GAAS Injection Lasers", De Loach , B. C., Jr., 1973 IEEE/OSA Conference on Laser Engineering and...Vol. R-23, No. 4, 226-30, October 1974. 28. "Reliability of GAAS Injection Lasers", De Loach , B. C., Jr., 1973 IEEE/OSA Conference on Laser...opnatien ot 󈨊 deg C, mounted on a 4-inach square 0.250~ inch thick al~loy alum~nusi panel.. This mounting technique should be L~ ken into cunoidur~tiou

  6. Radiometric determination in situ of the face grades in Witwatersrand gold and uranium mines

    International Nuclear Information System (INIS)

    Smit, C.J.B.

    1985-01-01

    A prototype collimated radiometric face scanner was tested in the Harmony Gold Mine. The results obtained during the pilot study indicate that in situ radiometric uranium assays are statistically indistinguishable from those obtained conventionally from channel chip samples. In addition, the study demonstrated that reasonably reliable gold estimates can be deduced from the radiometric measurements, by use of the ratio of gold to uranium within a mine. The instrumentation, calibration procedures, and background determination are described briefly

  7. Mine water purify from radium

    International Nuclear Information System (INIS)

    Lebecka, J.

    1996-01-01

    The article describes purification of radium containing water in coal mines. Author concludes that water purification is relatively simple and effective way to decrease environmental pollution caused by coal mining. The amount of radium disposed with type A radium water has been significantly decreased. The results of investigations show that it will be soon possible to purify also type B radium water. Article compares the amounts of radium disposed by coal mines in 1990, 1995 and forecast for 2000

  8. Predicting rock bursts in mines

    Science.gov (United States)

    Spall, H.

    1979-01-01

    In terms of lives lost, rock bursts in underground mines can be as hazardous as earthquakes on the surface. So it is not surprising that fo the last 40 years the U.S Bureau of Mines has been using seismic methods for detecting areas in underground mines where there is a high differential stress which could lead to structural instability of the rock mass being excavated.

  9. Text Mining Applications and Theory

    CERN Document Server

    Berry, Michael W

    2010-01-01

    Text Mining: Applications and Theory presents the state-of-the-art algorithms for text mining from both the academic and industrial perspectives.  The contributors span several countries and scientific domains: universities, industrial corporations, and government laboratories, and demonstrate the use of techniques from machine learning, knowledge discovery, natural language processing and information retrieval to design computational models for automated text analysis and mining. This volume demonstrates how advancements in the fields of applied mathematics, computer science, machine learning

  10. 76 FR 63238 - Proximity Detection Systems for Continuous Mining Machines in Underground Coal Mines

    Science.gov (United States)

    2011-10-12

    ... Detection Systems for Continuous Mining Machines in Underground Coal Mines AGENCY: Mine Safety and Health... Agency's proposed rule addressing Proximity Detection Systems for Continuous Mining Machines in... proposed rule for Proximity Detection Systems on Continuous Mining Machines in Underground Coal Mines. Due...

  11. 30 CFR 77.1712 - Reopening mines; notification; inspection prior to mining.

    Science.gov (United States)

    2010-07-01

    ... to mining. 77.1712 Section 77.1712 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION... prior to mining. Prior to reopening any surface coal mine after it has been abandoned or declared... an authorized representative of the Secretary before any mining operations in such mine are...

  12. 30 CFR 819.21 - Auger mining: Protection of underground mining.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Auger mining: Protection of underground mining. 819.21 Section 819.21 Mineral Resources OFFICE OF SURFACE MINING RECLAMATION AND ENFORCEMENT... STANDARDS-AUGER MINING § 819.21 Auger mining: Protection of underground mining. Auger holes shall not extend...

  13. 76 FR 70075 - Proximity Detection Systems for Continuous Mining Machines in Underground Coal Mines

    Science.gov (United States)

    2011-11-10

    ... Detection Systems for Continuous Mining Machines in Underground Coal Mines AGENCY: Mine Safety and Health... proposed rule addressing Proximity Detection Systems for Continuous Mining Machines in Underground Coal... Detection Systems for Continuous Mining Machines in Underground Coal Mines. MSHA conducted hearings on...

  14. Web Mining and Social Networking

    CERN Document Server

    Xu, Guandong; Li, Lin

    2011-01-01

    This book examines the techniques and applications involved in the Web Mining, Web Personalization and Recommendation and Web Community Analysis domains, including a detailed presentation of the principles, developed algorithms, and systems of the research in these areas. The applications of web mining, and the issue of how to incorporate web mining into web personalization and recommendation systems are also reviewed. Additionally, the volume explores web community mining and analysis to find the structural, organizational and temporal developments of web communities and reveal the societal s

  15. Sentiment Analysis and Opinion Mining

    CERN Document Server

    Liu, Bing

    2012-01-01

    Sentiment analysis and opinion mining is the field of study that analyzes people's opinions, sentiments, evaluations, attitudes, and emotions from written language. It is one of the most active research areas in natural language processing and is also widely studied in data mining, Web mining, and text mining. In fact, this research has spread outside of computer science to the management sciences and social sciences due to its importance to business and society as a whole. The growing importance of sentiment analysis coincides with the growth of social media such as reviews, forum discussions

  16. Data mining applications in healthcare.

    Science.gov (United States)

    Koh, Hian Chye; Tan, Gerald

    2005-01-01

    Data mining has been used intensively and extensively by many organizations. In healthcare, data mining is becoming increasingly popular, if not increasingly essential. Data mining applications can greatly benefit all parties involved in the healthcare industry. For example, data mining can help healthcare insurers detect fraud and abuse, healthcare organizations make customer relationship management decisions, physicians identify effective treatments and best practices, and patients receive better and more affordable healthcare services. The huge amounts of data generated by healthcare transactions are too complex and voluminous to be processed and analyzed by traditional methods. Data mining provides the methodology and technology to transform these mounds of data into useful information for decision making. This article explores data mining applications in healthcare. In particular, it discusses data mining and its applications within healthcare in major areas such as the evaluation of treatment effectiveness, management of healthcare, customer relationship management, and the detection of fraud and abuse. It also gives an illustrative example of a healthcare data mining application involving the identification of risk factors associated with the onset of diabetes. Finally, the article highlights the limitations of data mining and discusses some future directions.

  17. Golden prospects for uranium mine

    International Nuclear Information System (INIS)

    Anon.

    1980-01-01

    Beisa Mines Ltd, a wholly-owned subsidiary of Union Corporation, looks a born winner. Although only due for completion in 1982 it can already boast several 'firsts' in the mining industry. It is, of course, the first mine in South Africa to be developed as a primary producer of uranium with gold as a by-product. Its No. 1 Ventilation Shaft is also the smallest diameter shaft in SA to use a rocker-arm shovel loader for rock removal. Moreover, Beisa will be the first mine to use the revolutionary carbon-in-pulp process on a large scale

  18. Mine water treatment in Donbass

    Energy Technology Data Exchange (ETDEWEB)

    Azarenkov, P A; Anisimov, V M; Krol, V A

    1980-10-01

    About 2,000,000 m$SUP$3 of mine water are discharged by coal mines yearly to surface waters in the Donbass. Mine water in the region is rich in mineral salts and suspended matter (coal and rock particles). The DonUGI Institute developed a system of mine water treatment which permits the percentage of suspended matter to be reduced to 1.5 mg/l. The treated mine water can be used in fire fighting and in dust suppression systems in coal mines. A scheme of the water treatment system is shown. It consists of the following stages: reservoir of untreated mine water, chamber where mine water is mixed with reagents, primary sedimentation tanks, sand filters, and chlorination. Aluminium sulphate is used as a coagulation agent. To intensify coagulation polyacrylamide is added. Technical specifications of surface structures in which water treatment is carried out are discussed. Standardized mine water treatment systems with capacities of 600 m$SUP$3/h, with 900, 1200, 1500, 1800 and 2100 m$SUP$3/h capacities are used. (In Russian)

  19. Columbus safety and reliability

    Science.gov (United States)

    Longhurst, F.; Wessels, H.

    1988-10-01

    Analyses carried out to ensure Columbus reliability, availability, and maintainability, and operational and design safety are summarized. Failure modes/effects/criticality is the main qualitative tool used. The main aspects studied are fault tolerance, hazard consequence control, risk minimization, human error effects, restorability, and safe-life design.

  20. Reliability versus reproducibility

    International Nuclear Information System (INIS)

    Lautzenheiser, C.E.

    1976-01-01

    Defect detection and reproducibility of results are two separate but closely related subjects. It is axiomatic that a defect must be detected from examination to examination or reproducibility of results is very poor. On the other hand, a defect can be detected on each of subsequent examinations for higher reliability and still have poor reproducibility of results

  1. Power transformer reliability modelling

    NARCIS (Netherlands)

    Schijndel, van A.

    2010-01-01

    Problem description Electrical power grids serve to transport and distribute electrical power with high reliability and availability at acceptable costs and risks. These grids play a crucial though preferably invisible role in supplying sufficient power in a convenient form. Today’s society has

  2. Designing reliability into accelerators

    International Nuclear Information System (INIS)

    Hutton, A.

    1992-08-01

    For the next generation of high performance, high average luminosity colliders, the ''factories,'' reliability engineering must be introduced right at the inception of the project and maintained as a central theme throughout the project. There are several aspects which will be addressed separately: Concept; design; motivation; management techniques; and fault diagnosis

  3. Proof tests on reliability

    International Nuclear Information System (INIS)

    Mishima, Yoshitsugu

    1983-01-01

    In order to obtain public understanding on nuclear power plants, tests should be carried out to prove the reliability and safety of present LWR plants. For example, the aseismicity of nuclear power plants must be verified by using a large scale earthquake simulator. Reliability test began in fiscal 1975, and the proof tests on steam generators and on PWR support and flexure pins against stress corrosion cracking have already been completed, and the results have been internationally highly appreciated. The capacity factor of the nuclear power plant operation in Japan rose to 80% in the summer of 1983, and considering the period of regular inspection, it means the operation of almost full capacity. Japanese LWR technology has now risen to the top place in the world after having overcome the defects. The significance of the reliability test is to secure the functioning till the age limit is reached, to confirm the correct forecast of deteriorating process, to confirm the effectiveness of the remedy to defects and to confirm the accuracy of predicting the behavior of facilities. The reliability of nuclear valves, fuel assemblies, the heat affected zones in welding, reactor cooling pumps and electric instruments has been tested or is being tested. (Kako, I.)

  4. Reliability and code level

    NARCIS (Netherlands)

    Kasperski, M.; Geurts, C.P.W.

    2005-01-01

    The paper describes the work of the IAWE Working Group WBG - Reliability and Code Level, one of the International Codification Working Groups set up at ICWE10 in Copenhagen. The following topics are covered: sources of uncertainties in the design wind load, appropriate design target values for the

  5. Reliability of Plastic Slabs

    DEFF Research Database (Denmark)

    Thoft-Christensen, Palle

    1989-01-01

    In the paper it is shown how upper and lower bounds for the reliability of plastic slabs can be determined. For the fundamental case it is shown that optimal bounds of a deterministic and a stochastic analysis are obtained on the basis of the same failure mechanisms and the same stress fields....

  6. Reliability based structural design

    NARCIS (Netherlands)

    Vrouwenvelder, A.C.W.M.

    2014-01-01

    According to ISO 2394, structures shall be designed, constructed and maintained in such a way that they are suited for their use during the design working life in an economic way. To fulfil this requirement one needs insight into the risk and reliability under expected and non-expected actions. A

  7. Travel time reliability modeling.

    Science.gov (United States)

    2011-07-01

    This report includes three papers as follows: : 1. Guo F., Rakha H., and Park S. (2010), "A Multi-state Travel Time Reliability Model," : Transportation Research Record: Journal of the Transportation Research Board, n 2188, : pp. 46-54. : 2. Park S.,...

  8. Reliability and Model Fit

    Science.gov (United States)

    Stanley, Leanne M.; Edwards, Michael C.

    2016-01-01

    The purpose of this article is to highlight the distinction between the reliability of test scores and the fit of psychometric measurement models, reminding readers why it is important to consider both when evaluating whether test scores are valid for a proposed interpretation and/or use. It is often the case that an investigator judges both the…

  9. Parametric Mass Reliability Study

    Science.gov (United States)

    Holt, James P.

    2014-01-01

    The International Space Station (ISS) systems are designed based upon having redundant systems with replaceable orbital replacement units (ORUs). These ORUs are designed to be swapped out fairly quickly, but some are very large, and some are made up of many components. When an ORU fails, it is replaced on orbit with a spare; the failed unit is sometimes returned to Earth to be serviced and re-launched. Such a system is not feasible for a 500+ day long-duration mission beyond low Earth orbit. The components that make up these ORUs have mixed reliabilities. Components that make up the most mass-such as computer housings, pump casings, and the silicon board of PCBs-typically are the most reliable. Meanwhile components that tend to fail the earliest-such as seals or gaskets-typically have a small mass. To better understand the problem, my project is to create a parametric model that relates both the mass of ORUs to reliability, as well as the mass of ORU subcomponents to reliability.

  10. Reliability Approach of a Compressor System using Reliability Block ...

    African Journals Online (AJOL)

    pc

    2018-03-05

    Mar 5, 2018 ... This paper presents a reliability analysis of such a system using reliability ... Keywords-compressor system, reliability, reliability block diagram, RBD .... the same structure has been kept with the three subsystems: air flow, oil flow and .... and Safety in Engineering Design", Springer, 2009. [3] P. O'Connor ...

  11. SIAM 2007 Text Mining Competition dataset

    Data.gov (United States)

    National Aeronautics and Space Administration — Subject Area: Text Mining Description: This is the dataset used for the SIAM 2007 Text Mining competition. This competition focused on developing text mining...

  12. Geologic mapping around Mahoma mining. San Jose mining company

    International Nuclear Information System (INIS)

    Techera, J.; Arrighetii, R.

    1993-01-01

    This study has as main objective carry out a geological mapping as well as the structural analysis , in 1.5.000 scale in the zone where the gold benefit plant of San Jose mining company is settled (Mahoma Mining). From this study has been marked many drillings.

  13. Robots in mining

    CSIR Research Space (South Africa)

    Green, J

    2010-09-01

    Full Text Available ? • FOG – Fall of ground • Who is at risk? • What is the cost of incident? • What can we do about it? The Robot Potential • Technology • Conclusion © CSIR 2010 Slide 3 Yes Robots can improve mine safety Robot patrols unoccupied areas Generates a... risk map Additional tool Inform miners in making safe © CSIR 2010 Slide 4 Miner Safety Statistics • from DME (2010/03) • March 2010 • 490 000 employed • 400 000 suppliers1 • 9 died, 7 in rockfall incidents 2 • Prior year- March 2010 • 152...

  14. Mining the Home Environment

    Science.gov (United States)

    Cook, Diane J.; Krishnan, Narayanan

    2014-01-01

    Individuals spend a majority of their time in their home or workplace and for many, these places are our sanctuaries. As society and technology advance there is a growing interest in improving the intelligence of the environments in which we live and work. By filling home environments with sensors and collecting data during daily routines, researchers can gain insights on human daily behavior and the impact of behavior on the residents and their environments. In this article we provide an overview of the data mining opportunities and challenges that smart environments provide for researchers and offer some suggestions for future work in this area. PMID:25506128

  15. Mining the Home Environment.

    Science.gov (United States)

    Cook, Diane J; Krishnan, Narayanan

    2014-12-01

    Individuals spend a majority of their time in their home or workplace and for many, these places are our sanctuaries. As society and technology advance there is a growing interest in improving the intelligence of the environments in which we live and work. By filling home environments with sensors and collecting data during daily routines, researchers can gain insights on human daily behavior and the impact of behavior on the residents and their environments. In this article we provide an overview of the data mining opportunities and challenges that smart environments provide for researchers and offer some suggestions for future work in this area.

  16. Reliability in the utility computing era: Towards reliable Fog computing

    DEFF Research Database (Denmark)

    Madsen, Henrik; Burtschy, Bernard; Albeanu, G.

    2013-01-01

    This paper considers current paradigms in computing and outlines the most important aspects concerning their reliability. The Fog computing paradigm as a non-trivial extension of the Cloud is considered and the reliability of the networks of smart devices are discussed. Combining the reliability...... requirements of grid and cloud paradigms with the reliability requirements of networks of sensor and actuators it follows that designing a reliable Fog computing platform is feasible....

  17. RTE - Reliability report 2016

    International Nuclear Information System (INIS)

    2017-06-01

    Every year, RTE produces a reliability report for the past year. This document lays out the main factors that affected the electrical power system's operational reliability in 2016 and the initiatives currently under way intended to ensure its reliability in the future. Within a context of the energy transition, changes to the European interconnected network mean that RTE has to adapt on an on-going basis. These changes include the increase in the share of renewables injecting an intermittent power supply into networks, resulting in a need for flexibility, and a diversification in the numbers of stakeholders operating in the energy sector and changes in the ways in which they behave. These changes are dramatically changing the structure of the power system of tomorrow and the way in which it will operate - particularly the way in which voltage and frequency are controlled, as well as the distribution of flows, the power system's stability, the level of reserves needed to ensure supply-demand balance, network studies, assets' operating and control rules, the tools used and the expertise of operators. The results obtained in 2016 are evidence of a globally satisfactory level of reliability for RTE's operations in somewhat demanding circumstances: more complex supply-demand balance management, cross-border schedules at interconnections indicating operation that is closer to its limits and - most noteworthy - having to manage a cold spell just as several nuclear power plants had been shut down. In a drive to keep pace with the changes expected to occur in these circumstances, RTE implemented numerous initiatives to ensure high levels of reliability: - maintaining investment levels of euro 1.5 billion per year; - increasing cross-zonal capacity at borders with our neighbouring countries, thus bolstering the security of our electricity supply; - implementing new mechanisms (demand response, capacity mechanism, interruptibility, etc.); - involvement in tests or projects

  18. Competitiveness of the mining sector

    International Nuclear Information System (INIS)

    Herrera Arango, Jairo; Gamba Saavedra, Gloria Patricia

    2006-01-01

    The paper is based on the upgraded study of the evaluation of competitiveness of the Colombian mining sector, carried out for the UPME, in the year 2005, with base in this study, the conditions were examined offered for Colombia for the mining industry

  19. Mining research for enhanced competitiveness

    CSIR Research Space (South Africa)

    Vogt, D

    2008-11-01

    Full Text Available Mining is very important to South Africa, contributing 7% of GDP directly, and 15% indirectly and employing more than 450 000 people. With the world’s largest resources of gold, platinum and ferrochrome, and major coal resources, mining...

  20. Implications of Emerging Data Mining

    Science.gov (United States)

    Kulathuramaiyer, Narayanan; Maurer, Hermann

    Data Mining describes a technology that discovers non-trivial hidden patterns in a large collection of data. Although this technology has a tremendous impact on our lives, the invaluable contributions of this invisible technology often go unnoticed. This paper discusses advances in data mining while focusing on the emerging data mining capability. Such data mining applications perform multidimensional mining on a wide variety of heterogeneous data sources, providing solutions to many unresolved problems. This paper also highlights the advantages and disadvantages arising from the ever-expanding scope of data mining. Data Mining augments human intelligence by equipping us with a wealth of knowledge and by empowering us to perform our daily tasks better. As the mining scope and capacity increases, users and organizations become more willing to compromise privacy. The huge data stores of the ‚master miners` allow them to gain deep insights into individual lifestyles and their social and behavioural patterns. Data integration and analysis capability of combining business and financial trends together with the ability to deterministically track market changes will drastically affect our lives.

  1. Process Mining Online Assessment Data

    Science.gov (United States)

    Pechenizkiy, Mykola; Trcka, Nikola; Vasilyeva, Ekaterina; van der Aalst, Wil; De Bra, Paul

    2009-01-01

    Traditional data mining techniques have been extensively applied to find interesting patterns, build descriptive and predictive models from large volumes of data accumulated through the use of different information systems. The results of data mining can be used for getting a better understanding of the underlying educational processes, for…

  2. Finding Gold in Data Mining

    Science.gov (United States)

    Flaherty, Bill

    2013-01-01

    Data-mining systems provide a variety of opportunities for school district personnel to streamline operations and focus on student achievement. This article describes the value of data mining for school personnel, finance departments, teacher evaluations, and in the classroom. It suggests that much could be learned about district practices if one…

  3. Expansion of Neyveli lignite mines

    Energy Technology Data Exchange (ETDEWEB)

    Kasturi, T S

    1982-06-01

    This paper describes activities at Neyveli lignite mines in the Tamil Nadu region of India. The equipment used, in mining and materials handling is described. Problems encountered in the conveyor transport system are described, and the solutions finally adopted are presented.

  4. Post-mining in France

    International Nuclear Information System (INIS)

    2007-01-01

    This plentifully illustrated book aims at showing how new equilibria are building up during the transition between mining activity and post-mining, and at stressing on the necessity to keep up the cultural elements, the competencies and knowledge of mining works. The first chapter - mine and men - shows the importance of mineral substances in the objects of the everyday life, illustrates the importance of the mining tradition in France and describes the technical and administrative organisation of the end of the mining activity (works, rehabilitation, regulation, monitoring..). Chapter two - exploitation methods - presents the surface and underground facilities and their impact on the environment (extraction machines, workshops, ore processing plants, decantation ponds..). The third chapter deals with the rehabilitation and monitoring aspects: impact of mining activity stoppage on underground and surface waters, land stability, soils cleansing.. The last chapter summarizes the history of French mining region by region: Nord-Pas-de-Calais, Lorraine-Alsace, Massif central, Bretagne-Normandie, Provence-Alpes-Cote d'Azur and Pyrenees

  5. Data Mining for Intrusion Detection

    Science.gov (United States)

    Singhal, Anoop; Jajodia, Sushil

    Data Mining Techniques have been successfully applied in many different fields including marketing, manufacturing, fraud detection and network management. Over the past years there is a lot of interest in security technologies such as intrusion detection, cryptography, authentication and firewalls. This chapter discusses the application of Data Mining techniques to computer security. Conclusions are drawn and directions for future research are suggested.

  6. Process mining online assessment data

    NARCIS (Netherlands)

    Pechenizkiy, M.; Trcka, N.; Vasilyeva, E.; Aalst, van der W.M.P.; De Bra, P.M.E.; Barnes, T.; Desmarais, M.; Romero, C.; Ventura, S.

    2009-01-01

    Traditional data mining techniques have been extensively applied to find interesting patterns, build descriptive and predictive models from large volumes of data accumulated through the use of different information systems. The results of data mining can be used for getting a better understanding of

  7. Education Roadmap for Mining Professionals

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2002-12-01

    This document represents the roadmap for education in the U.S. mining industry. It was developed based on the results of an Education Roadmap Workshop sponsored by the National Mining Association in conjunction with the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, Office of Industrial Technologies. The Workshop was held February 23, 2002 in Phoenix, Arizona.

  8. Coal Mine Methane in Russia

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2009-07-01

    This paper discusses coal mine methane emissions (CMM) in the Russian Federation and the potential for their productive utilisation. It highlights specific opportunities for cost-effective reductions of CMM from oil and natural gas facilities, coal mines and landfills, with the aim of improving knowledge about effective policy approaches.

  9. Coal mining in Australia

    Energy Technology Data Exchange (ETDEWEB)

    Mills, L J

    1981-12-01

    In 1959 black coal production in Australia totalled some 21.9 million tonnes per annum, 70% of this being produced from underground mines in the coalfields of New South Wales. By 1980 output levels had increased by nearly 350% to 75.4 million tonnes per annum (54% of which was exported) compared with 5% some 20 years earlier. Because it is blessed with large reserves of coal and other forms of energy, it is inevitable that the Australian coal mining industry will be required to play a major role in the development of the international coal market through to the end of the present century. Experts now predict a need for the black coal output in Australia to be developed from its present level to a minimum of 293 million tonnes per annum by the year 2000. This paper examines the present circumstances in the Australian coal industry and attempts to outline the development which has to be undertaken in order to meet the needs of an energy hungry world.

  10. Data mining and education.

    Science.gov (United States)

    Koedinger, Kenneth R; D'Mello, Sidney; McLaughlin, Elizabeth A; Pardos, Zachary A; Rosé, Carolyn P

    2015-01-01

    An emerging field of educational data mining (EDM) is building on and contributing to a wide variety of disciplines through analysis of data coming from various educational technologies. EDM researchers are addressing questions of cognition, metacognition, motivation, affect, language, social discourse, etc. using data from intelligent tutoring systems, massive open online courses, educational games and simulations, and discussion forums. The data include detailed action and timing logs of student interactions in user interfaces such as graded responses to questions or essays, steps in rich problem solving environments, games or simulations, discussion forum posts, or chat dialogs. They might also include external sensors such as eye tracking, facial expression, body movement, etc. We review how EDM has addressed the research questions that surround the psychology of learning with an emphasis on assessment, transfer of learning and model discovery, the role of affect, motivation and metacognition on learning, and analysis of language data and collaborative learning. For example, we discuss (1) how different statistical assessment methods were used in a data mining competition to improve prediction of student responses to intelligent tutor tasks, (2) how better cognitive models can be discovered from data and used to improve instruction, (3) how data-driven models of student affect can be used to focus discussion in a dialog-based tutoring system, and (4) how machine learning techniques applied to discussion data can be used to produce automated agents that support student learning as they collaborate in a chat room or a discussion board. © 2015 John Wiley & Sons, Ltd.

  11. Solution mining process

    International Nuclear Information System (INIS)

    Showalter, W.E.

    1984-01-01

    A solution mining process which may be used for uranium, thorium, vanadium, copper, nickel, molybdenum, rhenium, and selenium is claimed. During a first injection-and-production phase of between 6 months and 5 years, a leaching solution is injected through at least one well into the formation to solubilize the mineral values and form a pregnant liquor. This liquor is recovered through another well. The leaching solution contains sulfuric acid, nitric acid, hydrochloric acid, carbonic acid, an alkali metal carbonate, an alkali metal bicarbonate, ammonium carbonate or ammonium bicarbonate. Subsequently during a first production-only phase of between about 2 weeks and one year, injection of the leaching solution is suspended but pregnant liquor is still recovered. This stage is followed by a second injection-and-production phase of between 6 months and 5 years and a second production-only phase. The mineral values are separated from the pregnant liquor to form a barren liquor. The leaching agent is introduced into this liquor, and the solution is recycled. In a second claim for the solution mining of uranium, dilute carbonic acid is used as the leaching solution. The solution has a pH less than 7 and a bicarbonate ion concentration between about 380 ppm and 1000 ppm. The injection-and-production phase lasts between one and two years and the production only phase takes between one and four months. Carbon dioxide is introduced into the barren liquor to form a dilute carbonic acid solution and the solution is recycled

  12. Waste package reliability analysis

    International Nuclear Information System (INIS)

    Pescatore, C.; Sastre, C.

    1983-01-01

    Proof of future performance of a complex system such as a high-level nuclear waste package over a period of hundreds to thousands of years cannot be had in the ordinary sense of the word. The general method of probabilistic reliability analysis could provide an acceptable framework to identify, organize, and convey the information necessary to satisfy the criterion of reasonable assurance of waste package performance according to the regulatory requirements set forth in 10 CFR 60. General principles which may be used to evaluate the qualitative and quantitative reliability of a waste package design are indicated and illustrated with a sample calculation of a repository concept in basalt. 8 references, 1 table

  13. Accelerator reliability workshop

    Energy Technology Data Exchange (ETDEWEB)

    Hardy, L; Duru, Ph; Koch, J M; Revol, J L; Van Vaerenbergh, P; Volpe, A M; Clugnet, K; Dely, A; Goodhew, D

    2002-07-01

    About 80 experts attended this workshop, which brought together all accelerator communities: accelerator driven systems, X-ray sources, medical and industrial accelerators, spallation sources projects (American and European), nuclear physics, etc. With newly proposed accelerator applications such as nuclear waste transmutation, replacement of nuclear power plants and others. Reliability has now become a number one priority for accelerator designers. Every part of an accelerator facility from cryogenic systems to data storage via RF systems are concerned by reliability. This aspect is now taken into account in the design/budget phase, especially for projects whose goal is to reach no more than 10 interruptions per year. This document gathers the slides but not the proceedings of the workshop.

  14. Human Reliability Program Workshop

    Energy Technology Data Exchange (ETDEWEB)

    Landers, John; Rogers, Erin; Gerke, Gretchen

    2014-05-18

    A Human Reliability Program (HRP) is designed to protect national security as well as worker and public safety by continuously evaluating the reliability of those who have access to sensitive materials, facilities, and programs. Some elements of a site HRP include systematic (1) supervisory reviews, (2) medical and psychological assessments, (3) management evaluations, (4) personnel security reviews, and (4) training of HRP staff and critical positions. Over the years of implementing an HRP, the Department of Energy (DOE) has faced various challenges and overcome obstacles. During this 4-day activity, participants will examine programs that mitigate threats to nuclear security and the insider threat to include HRP, Nuclear Security Culture (NSC) Enhancement, and Employee Assistance Programs. The focus will be to develop an understanding of the need for a systematic HRP and to discuss challenges and best practices associated with mitigating the insider threat.

  15. Reliability and construction control

    Directory of Open Access Journals (Sweden)

    Sherif S. AbdelSalam

    2016-06-01

    Full Text Available The goal of this study was to determine the most reliable and efficient combination of design and construction methods required for vibro piles. For a wide range of static and dynamic formulas, the reliability-based resistance factors were calculated using EGYPT database, which houses load test results for 318 piles. The analysis was extended to introduce a construction control factor that determines the variation between the pile nominal capacities calculated using static versus dynamic formulae. From the major outcomes, the lowest coefficient of variation is associated with Davisson’s criterion, and the resistance factors calculated for the AASHTO method are relatively high compared with other methods. Additionally, the CPT-Nottingham and Schmertmann method provided the most economic design. Recommendations related to a pile construction control factor were also presented, and it was found that utilizing the factor can significantly reduce variations between calculated and actual capacities.

  16. Scyllac equipment reliability analysis

    International Nuclear Information System (INIS)

    Gutscher, W.D.; Johnson, K.J.

    1975-01-01

    Most of the failures in Scyllac can be related to crowbar trigger cable faults. A new cable has been designed, procured, and is currently undergoing evaluation. When the new cable has been proven, it will be worked into the system as quickly as possible without causing too much additional down time. The cable-tip problem may not be easy or even desirable to solve. A tightly fastened permanent connection that maximizes contact area would be more reliable than the plug-in type of connection in use now, but it would make system changes and repairs much more difficult. The balance of the failures have such a low occurrence rate that they do not cause much down time and no major effort is underway to eliminate them. Even though Scyllac was built as an experimental system and has many thousands of components, its reliability is very good. Because of this the experiment has been able to progress at a reasonable pace

  17. Improving Power Converter Reliability

    DEFF Research Database (Denmark)

    Ghimire, Pramod; de Vega, Angel Ruiz; Beczkowski, Szymon

    2014-01-01

    of a high-power IGBT module during converter operation, which may play a vital role in improving the reliability of the power converters. The measured voltage is used to estimate the module average junction temperature of the high and low-voltage side of a half-bridge IGBT separately in every fundamental......The real-time junction temperature monitoring of a high-power insulated-gate bipolar transistor (IGBT) module is important to increase the overall reliability of power converters for industrial applications. This article proposes a new method to measure the on-state collector?emitter voltage...... is measured in a wind power converter at a low fundamental frequency. To illustrate more, the test method as well as the performance of the measurement circuit are also presented. This measurement is also useful to indicate failure mechanisms such as bond wire lift-off and solder layer degradation...

  18. Accelerator reliability workshop

    International Nuclear Information System (INIS)

    Hardy, L.; Duru, Ph.; Koch, J.M.; Revol, J.L.; Van Vaerenbergh, P.; Volpe, A.M.; Clugnet, K.; Dely, A.; Goodhew, D.

    2002-01-01

    About 80 experts attended this workshop, which brought together all accelerator communities: accelerator driven systems, X-ray sources, medical and industrial accelerators, spallation sources projects (American and European), nuclear physics, etc. With newly proposed accelerator applications such as nuclear waste transmutation, replacement of nuclear power plants and others. Reliability has now become a number one priority for accelerator designers. Every part of an accelerator facility from cryogenic systems to data storage via RF systems are concerned by reliability. This aspect is now taken into account in the design/budget phase, especially for projects whose goal is to reach no more than 10 interruptions per year. This document gathers the slides but not the proceedings of the workshop

  19. Safety and reliability assessment

    International Nuclear Information System (INIS)

    1979-01-01

    This report contains the papers delivered at the course on safety and reliability assessment held at the CSIR Conference Centre, Scientia, Pretoria. The following topics were discussed: safety standards; licensing; biological effects of radiation; what is a PWR; safety principles in the design of a nuclear reactor; radio-release analysis; quality assurance; the staffing, organisation and training for a nuclear power plant project; event trees, fault trees and probability; Automatic Protective Systems; sources of failure-rate data; interpretation of failure data; synthesis and reliability; quantification of human error in man-machine systems; dispersion of noxious substances through the atmosphere; criticality aspects of enrichment and recovery plants; and risk and hazard analysis. Extensive examples are given as well as case studies

  20. Reliability of Circumplex Axes

    Directory of Open Access Journals (Sweden)

    Micha Strack

    2013-06-01

    Full Text Available We present a confirmatory factor analysis (CFA procedure for computing the reliability of circumplex axes. The tau-equivalent CFA variance decomposition model estimates five variance components: general factor, axes, scale-specificity, block-specificity, and item-specificity. Only the axes variance component is used for reliability estimation. We apply the model to six circumplex types and 13 instruments assessing interpersonal and motivational constructs—Interpersonal Adjective List (IAL, Interpersonal Adjective Scales (revised; IAS-R, Inventory of Interpersonal Problems (IIP, Impact Messages Inventory (IMI, Circumplex Scales of Interpersonal Values (CSIV, Support Action Scale Circumplex (SAS-C, Interaction Problems With Animals (IPI-A, Team Role Circle (TRC, Competing Values Leadership Instrument (CV-LI, Love Styles, Organizational Culture Assessment Instrument (OCAI, Customer Orientation Circle (COC, and System for Multi-Level Observation of Groups (behavioral adjectives; SYMLOG—in 17 German-speaking samples (29 subsamples, grouped by self-report, other report, and metaperception assessments. The general factor accounted for a proportion ranging from 1% to 48% of the item variance, the axes component for 2% to 30%; and scale specificity for 1% to 28%, respectively. Reliability estimates varied considerably from .13 to .92. An application of the Nunnally and Bernstein formula proposed by Markey, Markey, and Tinsley overestimated axes reliabilities in cases of large-scale specificities but otherwise works effectively. Contemporary circumplex evaluations such as Tracey’s RANDALL are sensitive to the ratio of the axes and scale-specificity components. In contrast, the proposed model isolates both components.

  1. The cost of reliability

    International Nuclear Information System (INIS)

    Ilic, M.

    1998-01-01

    In this article the restructuring process under way in the US power industry is being revisited from the point of view of transmission system provision and reliability was rolled into the average cost of electricity to all, it is not so obvious how is this cost managed in the new industry. A new MIT approach to transmission pricing is here suggested as a possible solution [it

  2. Real world data mining applications

    CERN Document Server

    Abou-Nasr, Mahmoud; Stahlbock, Robert; Weiss, Gary M

    2014-01-01

    Data mining applications range from commercial to social domains, with novel applications appearing swiftly; for example, within the context of social networks. The expanding application sphere and social reach of advanced data mining raise pertinent issues of privacy and security. Present-day data mining is a progressive multidisciplinary endeavor. This inter- and multidisciplinary approach is well reflected within the field of information systems. The information systems research addresses software and hardware requirements for supporting computationally and data-intensive applications. Furthermore, it encompasses analyzing system and data aspects, and all manual or automated activities. In that respect, research at the interface of information systems and data mining has significant potential to produce actionable knowledge vital for corporate decision-making. The aim of the proposed volume is to provide a balanced treatment of the latest advances and developments in data mining; in particular, exploring s...

  3. Introduction to Space Resource Mining

    Science.gov (United States)

    Mueller, Robert P.

    2013-01-01

    There are vast amounts of resources in the solar system that will be useful to humans in space and possibly on Earth. None of these resources can be exploited without the first necessary step of extra-terrestrial mining. The necessary technologies for tele-robotic and autonomous mining have not matured sufficiently yet. The current state of technology was assessed for terrestrial and extraterrestrial mining and a taxonomy of robotic space mining mechanisms was presented which was based on current existing prototypes. Terrestrial and extra-terrestrial mining methods and technologies are on the cusp of massive changes towards automation and autonomy for economic and safety reasons. It is highly likely that these industries will benefit from mutual cooperation and technology transfer.

  4. The hydrogen mine introduction initiative

    Energy Technology Data Exchange (ETDEWEB)

    Betournay, M.C.; Howell, B. [Natural Resources Canada, Ottawa, ON (Canada). CANMET Mining and Mineral Sciences Laboratories

    2009-07-01

    In an effort to address air quality concerns in underground mines, the mining industry is considering the use fuel cells instead of diesel to power mine production vehicles. The immediate issues and opportunities associated with fuel cells use include a reduction in harmful greenhouse gas emissions; reduction in ventilation operating costs; reduction in energy consumption; improved health benefits; automation; and high productivity. The objective of the hydrogen mine introduction initiative (HMII) is to develop and test the range of fundamental and needed operational technology, specifications and best practices for underground hydrogen power applications. Although proof of concept studies have shown high potential for fuel cell use, safety considerations must be addressed, including hydrogen behaviour in confined conditions. This presentation highlighted the issues to meet operational requirements, notably hydrogen production; delivery and storage; mine regulations; and hydrogen behaviour underground. tabs., figs.

  5. Software reliability studies

    Science.gov (United States)

    Hoppa, Mary Ann; Wilson, Larry W.

    1994-01-01

    There are many software reliability models which try to predict future performance of software based on data generated by the debugging process. Our research has shown that by improving the quality of the data one can greatly improve the predictions. We are working on methodologies which control some of the randomness inherent in the standard data generation processes in order to improve the accuracy of predictions. Our contribution is twofold in that we describe an experimental methodology using a data structure called the debugging graph and apply this methodology to assess the robustness of existing models. The debugging graph is used to analyze the effects of various fault recovery orders on the predictive accuracy of several well-known software reliability algorithms. We found that, along a particular debugging path in the graph, the predictive performance of different models can vary greatly. Similarly, just because a model 'fits' a given path's data well does not guarantee that the model would perform well on a different path. Further we observed bug interactions and noted their potential effects on the predictive process. We saw that not only do different faults fail at different rates, but that those rates can be affected by the particular debugging stage at which the rates are evaluated. Based on our experiment, we conjecture that the accuracy of a reliability prediction is affected by the fault recovery order as well as by fault interaction.

  6. Investment in new product reliability

    International Nuclear Information System (INIS)

    Murthy, D.N.P.; Rausand, M.; Virtanen, S.

    2009-01-01

    Product reliability is of great importance to both manufacturers and customers. Building reliability into a new product is costly, but the consequences of inadequate product reliability can be costlier. This implies that manufacturers need to decide on the optimal investment in new product reliability by achieving a suitable trade-off between the two costs. This paper develops a framework and proposes an approach to help manufacturers decide on the investment in new product reliability.

  7. MinePath: Mining for Phenotype Differential Sub-paths in Molecular Pathways

    Science.gov (United States)

    Koumakis, Lefteris; Kartsaki, Evgenia; Chatzimina, Maria; Zervakis, Michalis; Vassou, Despoina; Marias, Kostas; Moustakis, Vassilis; Potamias, George

    2016-01-01

    Pathway analysis methodologies couple traditional gene expression analysis with knowledge encoded in established molecular pathway networks, offering a promising approach towards the biological interpretation of phenotype differentiating genes. Early pathway analysis methodologies, named as gene set analysis (GSA), view pathways just as plain lists of genes without taking into account either the underlying pathway network topology or the involved gene regulatory relations. These approaches, even if they achieve computational efficiency and simplicity, consider pathways that involve the same genes as equivalent in terms of their gene enrichment characteristics. Most recent pathway analysis approaches take into account the underlying gene regulatory relations by examining their consistency with gene expression profiles and computing a score for each profile. Even with this approach, assessing and scoring single-relations limits the ability to reveal key gene regulation mechanisms hidden in longer pathway sub-paths. We introduce MinePath, a pathway analysis methodology that addresses and overcomes the aforementioned problems. MinePath facilitates the decomposition of pathways into their constituent sub-paths. Decomposition leads to the transformation of single-relations to complex regulation sub-paths. Regulation sub-paths are then matched with gene expression sample profiles in order to evaluate their functional status and to assess phenotype differential power. Assessment of differential power supports the identification of the most discriminant profiles. In addition, MinePath assess the significance of the pathways as a whole, ranking them by their p-values. Comparison results with state-of-the-art pathway analysis systems are indicative for the soundness and reliability of the MinePath approach. In contrast with many pathway analysis tools, MinePath is a web-based system (www.minepath.org) offering dynamic and rich pathway visualization functionality, with the

  8. Mining rare associations between biological ontologies.

    Science.gov (United States)

    Benites, Fernando; Simon, Svenja; Sapozhnikova, Elena

    2014-01-01

    The constantly increasing volume and complexity of available biological data requires new methods for their management and analysis. An important challenge is the integration of information from different sources in order to discover possible hidden relations between already known data. In this paper we introduce a data mining approach which relates biological ontologies by mining cross and intra-ontology pairwise generalized association rules. Its advantage is sensitivity to rare associations, for these are important for biologists. We propose a new class of interestingness measures designed for hierarchically organized rules. These measures allow one to select the most important rules and to take into account rare cases. They favor rules with an actual interestingness value that exceeds the expected value. The latter is calculated taking into account the parent rule. We demonstrate this approach by applying it to the analysis of data from Gene Ontology and GPCR databases. Our objective is to discover interesting relations between two different ontologies or parts of a single ontology. The association rules that are thus discovered can provide the user with new knowledge about underlying biological processes or help improve annotation consistency. The obtained results show that produced rules represent meaningful and quite reliable associations.

  9. Mining rare associations between biological ontologies.

    Directory of Open Access Journals (Sweden)

    Fernando Benites

    Full Text Available The constantly increasing volume and complexity of available biological data requires new methods for their management and analysis. An important challenge is the integration of information from different sources in order to discover possible hidden relations between already known data. In this paper we introduce a data mining approach which relates biological ontologies by mining cross and intra-ontology pairwise generalized association rules. Its advantage is sensitivity to rare associations, for these are important for biologists. We propose a new class of interestingness measures designed for hierarchically organized rules. These measures allow one to select the most important rules and to take into account rare cases. They favor rules with an actual interestingness value that exceeds the expected value. The latter is calculated taking into account the parent rule. We demonstrate this approach by applying it to the analysis of data from Gene Ontology and GPCR databases. Our objective is to discover interesting relations between two different ontologies or parts of a single ontology. The association rules that are thus discovered can provide the user with new knowledge about underlying biological processes or help improve annotation consistency. The obtained results show that produced rules represent meaningful and quite reliable associations.

  10. A metal support for mining drifts

    Energy Technology Data Exchange (ETDEWEB)

    Lopukhov, N M; Dolotkin, Yu N; Parfenov, Yu A; Verner, Yu V

    1982-01-01

    The invention relates to underground coal production; namely, the area of reinforcing development workings in gently sloping coal seams, notably workings with pillarless working of the columns. The proposed metal support for mining drifts includes props made of special sections and a roof timber with curved and straight sections; yieldability units; and a shoe. To raise the support's reliability and work safety as it is erected and removed, the shoe is made of firmly interconnected special cross sections; one of them has holes in the side walls, while the prop has a lug firmly fastened to it, situated in the special section and fixed in it by a pin installed in the holes of the lug and special profile with a clearance. The end of the roof timber has a guide trough at an angle to the prop's axis.

  11. Scalable Frequent Subgraph Mining

    KAUST Repository

    Abdelhamid, Ehab

    2017-06-19

    A graph is a data structure that contains a set of nodes and a set of edges connecting these nodes. Nodes represent objects while edges model relationships among these objects. Graphs are used in various domains due to their ability to model complex relations among several objects. Given an input graph, the Frequent Subgraph Mining (FSM) task finds all subgraphs with frequencies exceeding a given threshold. FSM is crucial for graph analysis, and it is an essential building block in a variety of applications, such as graph clustering and indexing. FSM is computationally expensive, and its existing solutions are extremely slow. Consequently, these solutions are incapable of mining modern large graphs. This slowness is caused by the underlying approaches of these solutions which require finding and storing an excessive amount of subgraph matches. This dissertation proposes a scalable solution for FSM that avoids the limitations of previous work. This solution is composed of four components. The first component is a single-threaded technique which, for each candidate subgraph, needs to find only a minimal number of matches. The second component is a scalable parallel FSM technique that utilizes a novel two-phase approach. The first phase quickly builds an approximate search space, which is then used by the second phase to optimize and balance the workload of the FSM task. The third component focuses on accelerating frequency evaluation, which is a critical step in FSM. To do so, a machine learning model is employed to predict the type of each graph node, and accordingly, an optimized method is selected to evaluate that node. The fourth component focuses on mining dynamic graphs, such as social networks. To this end, an incremental index is maintained during the dynamic updates. Only this index is processed and updated for the majority of graph updates. Consequently, search space is significantly pruned and efficiency is improved. The empirical evaluation shows that the

  12. Web-video-mining-supported workflow modeling for laparoscopic surgeries.

    Science.gov (United States)

    Liu, Rui; Zhang, Xiaoli; Zhang, Hao

    2016-11-01

    As quality assurance is of strong concern in advanced surgeries, intelligent surgical systems are expected to have knowledge such as the knowledge of the surgical workflow model (SWM) to support their intuitive cooperation with surgeons. For generating a robust and reliable SWM, a large amount of training data is required. However, training data collected by physically recording surgery operations is often limited and data collection is time-consuming and labor-intensive, severely influencing knowledge scalability of the surgical systems. The objective of this research is to solve the knowledge scalability problem in surgical workflow modeling with a low cost and labor efficient way. A novel web-video-mining-supported surgical workflow modeling (webSWM) method is developed. A novel video quality analysis method based on topic analysis and sentiment analysis techniques is developed to select high-quality videos from abundant and noisy web videos. A statistical learning method is then used to build the workflow model based on the selected videos. To test the effectiveness of the webSWM method, 250 web videos were mined to generate a surgical workflow for the robotic cholecystectomy surgery. The generated workflow was evaluated by 4 web-retrieved videos and 4 operation-room-recorded videos, respectively. The evaluation results (video selection consistency n-index ≥0.60; surgical workflow matching degree ≥0.84) proved the effectiveness of the webSWM method in generating robust and reliable SWM knowledge by mining web videos. With the webSWM method, abundant web videos were selected and a reliable SWM was modeled in a short time with low labor cost. Satisfied performances in mining web videos and learning surgery-related knowledge show that the webSWM method is promising in scaling knowledge for intelligent surgical systems. Copyright © 2016 Elsevier B.V. All rights reserved.

  13. An FMM-FFT accelerated integral equation solver for characterizing electromagnetic wave propagation in mine tunnels and galleries loaded with conductors

    KAUST Repository

    Yü cel, Abdulkadir C.; Liu, Yang; Bagci, Hakan; Michielssen, Eric

    2014-01-01

    Reliable wireless communication and tracking systems in underground mines are of paramount importance to increase miners' productivity while monitoring the environmental conditions and increasing the effectiveness of rescue operations. Key

  14. Ensemble Data Mining Methods

    Science.gov (United States)

    Oza, Nikunj C.

    2004-01-01

    Ensemble Data Mining Methods, also known as Committee Methods or Model Combiners, are machine learning methods that leverage the power of multiple models to achieve better prediction accuracy than any of the individual models could on their own. The basic goal when designing an ensemble is the same as when establishing a committee of people: each member of the committee should be as competent as possible, but the members should be complementary to one another. If the members are not complementary, Le., if they always agree, then the committee is unnecessary---any one member is sufficient. If the members are complementary, then when one or a few members make an error, the probability is high that the remaining members can correct this error. Research in ensemble methods has largely revolved around designing ensembles consisting of competent yet complementary models.

  15. Mine roof supports

    Energy Technology Data Exchange (ETDEWEB)

    Cook, S.P.

    1983-09-28

    The area of application of this invention relates to the hydraulic system of props in mine supports. Hydraulic props are normally equipped with backup equipment for use in case of failure of the primary hydraulic line. The proposed system includes the main hydraulic circuit with a control valve, an auxillary hydraulic line with a control valve and a limiter designed to close this valve when the necessary pressure level is attained in the hydraulic props. The limiter may be mechanical, electrical or hydraulic. The principle of operation of the system is as follows: if the pressure in the main hydraulic line falls off for some reason, the hydraulic cylinder connected to the props is actuated; this cylinder activates the shut-off valve in the auxillary hydraulic line by opening it. The open time of this line is controlled by a residual pressure limiter. The system is easily controlled and provides a constant emulsion pressure in the props.

  16. Coal mining equipment

    International Nuclear Information System (INIS)

    Stein, R.R.; Martin, T.W.

    1991-01-01

    The word in longwall components is big, and these larger components have price tags to match. The logic behind the greater investment is that it will yield high production rates and good uptime statistics. This is true in most cases. More important than single-shift tonnage records, average shift production continues to climb upwards. This paper reports on the quality, and more significantly, the quantity of service supplied for long-wall equipment, which has reached levels that would have been seen as unachievable when longwall mining was first introduced in the U.S. The school of thought then was that longwall would increase productivity in part by reducing the number of production units and thus reducing the number of personnel employed underground. The expectation of fewer employees turned out to be unrealistic. That was probably one reason that some early attempts to install longwall system looked more like failures than vision of the future

  17. Angular mining conveyor

    Energy Technology Data Exchange (ETDEWEB)

    Sender, A; Mura, A; Liduchowski, L; Zok, P; Skolik, W; Szyngiel, S; Rojek, H; Gajda, B; Major, M; Stanislawski, P; Sliwiok, H; Sikora, J

    1988-10-19

    Angular mining conveyor provided with a drag chain extending along the axis of its path of movement, and a corner member, inside which the drag chain is led in a forced way, characterized in that the drag chain, where its path curves around the corner member, is located by supporting of the vertical links of the chain along the required curved section of the conveyor path around said corner member, and the supporting line of the links is so chosen, that, within the said curved section of the conveyor path, a space is maintained between the vertical end surface of the scrapers and the outer curved surface of the radially inner side wall of a corner trough associated with the corner member, through which corner trough the scrapers pass. 10 figs.

  18. CEA and mining industry

    International Nuclear Information System (INIS)

    Anon.

    2003-01-01

    The French atomic energy commission (CEA) is involved in the mining industry in several ways: - in the front-end of the nuclear industry through its daughter companies and participations in the exploration and exploitation of uranium ores, but also of gold and alloy metals with a 26% participation in Eramet company, the world leader of manganese and nickel. This activity is the main occupation of Cogema daughter company, via the Areva holding; - in the back-end of the nuclear fuel cycle with the delicate problem of the management of radioactive wastes; - in parallel with the nuclear industry through an important activity in semiconductor materials (FCI and SMTElectronics); - and finally through various research works on several mineral compounds. This article focusses on the fuel cycle aspects of the CEA activities and concludes with the research works carried out today on thermonuclear fusion. (J.S.)

  19. Data Mining SIAM Presentation

    Science.gov (United States)

    Srivastava, Ashok; McIntosh, Dawn; Castle, Pat; Pontikakis, Manos; Diev, Vesselin; Zane-Ulman, Brett; Turkov, Eugene; Akella, Ram; Xu, Zuobing; Kumaresan, Sakthi Preethi

    2006-01-01

    This viewgraph document describes the data mining system developed at NASA Ames. Many NASA programs have large numbers (and types) of problem reports.These free text reports are written by a number of different people, thus the emphasis and wording vary considerably With so much data to sift through, analysts (subject experts) need help identifying any possible safety issues or concerns and help them confirm that they haven't missed important problems. Unsupervised clustering is the initial step to accomplish this; We think we can go much farther, specifically, identify possible recurring anomalies. Recurring anomalies may be indicators of larger systemic problems. The requirement to identify these anomalies has led to the development of Recurring Anomaly Discovery System (ReADS).

  20. Data mining goes multidimensional.

    Science.gov (United States)

    Hettler, M

    1997-03-01

    The success of a healthcare organization depends on its ability to acquire, store, analyze and compare data across many parts of the enterprise, by many individuals. While relational databases have been around since the 1970s, their two-dimensional structure has limited--or made impossible--the kind of cross-dimensional trend analysis so necessary to healthcare today. Enter online analytical processing (OLAP), in which servers store data in multiple dimensions, opening a world of opportunity for data-mining across the enterprise. In this issue of HEALTHCARE INFORMATICS, we feature our first report from the National Software Testing Laboratories (NSTL) about technologies that will change the way healthcare does business. A division of The McGraw-Hill Companies, NSTL is an independent software and hardware testing lab offering services that include compatibility testing, bug testing, comparison testing, documentation evaluation and usability.

  1. Uranium mining sites - Thematic sheets

    International Nuclear Information System (INIS)

    2009-01-01

    A first sheet proposes comments, data and key numbers about uranium extraction in France: general overview of uranium mining sites, status of waste rock and tailings after exploitation, site rehabilitation. The second sheet addresses the sources of exposure to ionizing radiations due to ancient uranium mining sites: discussion on the identification of these sources associated with these sites, properly due to mining activities or to tailings, or due to the transfer of radioactive substances towards water and to the contamination of sediments, description of the practice and assessment of radiological control of mining sites. A third sheet addresses the radiological exposure of public to waste rocks, and the dose assessment according to exposure scenarios: main exposure ways to be considered, studied exposure scenarios (passage on backfilled path and grounds, stay in buildings built on waste rocks, keeping mineralogical samples at home). The fourth sheet addresses research programmes of the IRSN on uranium and radon: epidemiological studies (performed on mine workers; on French and on European cohorts, French and European studies on the risk of lung cancer associated with radon in housing), study of the biological effects of chronic exposures. The last sheet addresses studies and expertises performed by the IRSN on ancient uranium mining sites in France: studies commissioned by public authorities, radioactivity control studies performed by the IRSN about mining sites, participation of the IRSN to actions to promote openness to civil society

  2. Nuclear performance and reliability

    International Nuclear Information System (INIS)

    Rothwell, G.

    1993-01-01

    If fewer forced outages are a sign of improved safety, nuclear power plants have become safer and more productive. There has been a significant improvement in nuclear power plant performance, due largely to a decline in the forced outage rate and a dramatic drop in the average number of forced outages per fuel cycle. If fewer forced outages are a sign of improved safety, nuclear power plants have become safer and more productive over time. To encourage further increases in performance, regulatory incentive schemes should reward reactor operators for improved reliability and safety, as well as for improved performance

  3. [How Reliable is Neuronavigation?].

    Science.gov (United States)

    Stieglitz, Lennart Henning

    2016-02-17

    Neuronavigation plays a central role in modern neurosurgery. It allows visualizing instruments and three-dimensional image data intraoperatively and supports spatial orientation. Thus it allows to reduce surgical risks and speed up complex surgical procedures. The growing availability and importance of neuronavigation makes clear how relevant it is to know about its reliability and accuracy. Different factors may influence the accuracy during the surgery unnoticed, misleading the surgeon. Besides the best possible optimization of the systems themselves, a good knowledge about its weaknesses is mandatory for every neurosurgeon.

  4. The value of reliability

    DEFF Research Database (Denmark)

    Fosgerau, Mogens; Karlström, Anders

    2010-01-01

    We derive the value of reliability in the scheduling of an activity of random duration, such as travel under congested conditions. Using a simple formulation of scheduling utility, we show that the maximal expected utility is linear in the mean and standard deviation of trip duration, regardless...... of the form of the standardised distribution of trip durations. This insight provides a unification of the scheduling model and models that include the standard deviation of trip duration directly as an argument in the cost or utility function. The results generalise approximately to the case where the mean...

  5. Uranium - a challenging mining business

    International Nuclear Information System (INIS)

    Stadelhofer, J.W.; Wedig, M.J.

    2007-01-01

    The main application of uranium is its use as a fuel for the nuclear electricity generation. Presently about 68,000 t (177 mill. lbs) of uranium are annually required, of which 41,500 (108 mill. lbs) are provided from fresh mine production whereas 26,500 t (69 mill. lbs) are stock drawdown supplies from civil or military sources. Two-thirds of production are recovered by underground mining and about 75% (30,350 t) of the world's uranium mine production are extracted from top ten mines. All major uranium mining companies are making efforts to enlarge their production capacities: The paramount Cameco's Cigar Lake project has been delayed due to mine water inflow. Production is expected to commence by latest in 2010; the nameplate capacity of 6000 t/a should be reached in 2011. AREVA reported plans to invest about Euro 500 to 600 mill. to double its uranium production by 2010. In 2006 Denison Mines and International Uranium Corporation announced that they have entered into an agreement to merge the two companies in order to create a mid-tier, North American-focused uranium producer with the potential annual production of more than 5.5 mill. lbs of U 3 O 8 by 2010. The skyrocketing global electricity demand, growing public acceptance and more favourable policies have initiated a new round of global development of the nuclear industry. Against this backdrop, about 30,000 t/a to 40,000 t/a of additional mine production will be required within the upcoming 20 years to substitute secondary uranium supplies and to meet the expected increased demand; new start-up junior mining companies (e.g. Paladin) will contribute to this increased production. (orig.)

  6. Acid mine drainage: mining and water pollution issues in British Columbia

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-12-31

    The importance of protecting water quality and some of the problems associated with mineral development are described. Negative impacts of mining operations such as sedimentation, water disturbances, and water pollution from waste rock and tailings are considered. Mining wastes, types of water pollution from mining, the legacy of acid mine drainage, predicting acid mine drainage, preventing and mitigating acid mine drainage, examples from the past, and cyanide heap-leaching are discussed. The real costs of mining at the Telkwa open pit coal mine are assessed. British Columbia mines that are known for or are potentially acid generating are shown on a map. 32 refs., 10 figs.

  7. Management of mining-related damages in abandoned underground coal mine areas using GIS

    International Nuclear Information System (INIS)

    Lee, U.J.; Kim, J.A.; Kim, S.S.; Kim, W.K.; Yoon, S.H.; Choi, J.K.

    2005-01-01

    The mining-related damages such as ground subsidence, acid mine drainage (AMD), and deforestation in the abandoned underground coal mine areas become an object of public concern. Therefore, the system to manage the mining-related damages is needed for the effective drive of rehabilitation activities. The management system for Abandoned Underground Coal Mine using GIS includes the database about mining record and information associated with the mining-related damages and application programs to support mine damage prevention business. Also, this system would support decision-making policy for rehabilitation and provide basic geological data for regional construction works in abandoned underground coal mine areas. (authors)

  8. Collaborative Data Mining Tool for Education

    Science.gov (United States)

    Garcia, Enrique; Romero, Cristobal; Ventura, Sebastian; Gea, Miguel; de Castro, Carlos

    2009-01-01

    This paper describes a collaborative educational data mining tool based on association rule mining for the continuous improvement of e-learning courses allowing teachers with similar course's profile sharing and scoring the discovered information. This mining tool is oriented to be used by instructors non experts in data mining such that, its…

  9. A Collaborative Educational Association Rule Mining Tool

    Science.gov (United States)

    Garcia, Enrique; Romero, Cristobal; Ventura, Sebastian; de Castro, Carlos

    2011-01-01

    This paper describes a collaborative educational data mining tool based on association rule mining for the ongoing improvement of e-learning courses and allowing teachers with similar course profiles to share and score the discovered information. The mining tool is oriented to be used by non-expert instructors in data mining so its internal…

  10. 30 CFR 282.24 - Mining Plan.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 2 2010-07-01 2010-07-01 false Mining Plan. 282.24 Section 282.24 Mineral... § 282.24 Mining Plan. All OCS mineral development and production activities shall be conducted in accordance with a Mining Plan submitted by the lessee and approved by the Director. A Mining Plan shall...

  11. Statistical properties of mine tremor aftershocks

    CSIR Research Space (South Africa)

    Kgarume, TE

    2010-02-01

    Full Text Available Mine tremors and their aftershocks pose a risk to mine workers in the deep gold mines of South Africa. The statistical properties of mine-tremor aftershocks were investigated as part of an endeavour to assess the hazard and manage the risk. Data...

  12. MINE WASTE TECHNOLOGY PROGRAM: A SUCCESS STORY

    Science.gov (United States)

    Mining Waste generated by active and inactive mining operations is a growing problem for the mining industry, local governments, and Native American communities because of its impact on human health and the environment. In the US, the reported volume of mine waste is immense: 2 b...

  13. 30 CFR 75.203 - Mining methods.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Mining methods. 75.203 Section 75.203 Mineral... SAFETY STANDARDS-UNDERGROUND COAL MINES Roof Support § 75.203 Mining methods. (a) The method of mining... faulty pillar recovery methods. Pillar dimensions shall be compatible with effective control of the roof...

  14. Mastering SQL Server 2014 data mining

    CERN Document Server

    Bassan, Amarpreet Singh

    2014-01-01

    If you are a developer who is working on data mining for large companies and would like to enhance your knowledge of SQL Server Data Mining Suite, this book is for you. Whether you are brand new to data mining or are a seasoned expert, you will be able to master the skills needed to build a data mining solution.

  15. OCHRE PRECIPITATES AND ACID MINE DRAINAGE IN A MINE ENVIRONMENT

    Directory of Open Access Journals (Sweden)

    BRANISLAV MÁŠA

    2012-03-01

    Full Text Available This paper is focused to characterize the ochre precipitates and the mine water effluents of some old mine adits and settling pits after mining of polymetallic ores in Slovakia. It was shown that the mine water effluents from two different types of deposits (adits; settling pits have similar composition and represent slightly acidic sulphate water (pH in range 5.60-6.05, sulphate concentration from 1160 to 1905 g.dm-3. The ochreous precipitates were characterized by methods of X-ray diffraction analysis (XRD, scanning electron microscopy (SEM and B.E.T. method for measuring the specific surface area and porosity. The dominant phases were ferrihydrite with goethite or goethite with lepidocrocide.

  16. First Mining workshop of Mining and metallurgical of MERCOSUR

    International Nuclear Information System (INIS)

    1994-01-01

    In the city of Montevideo, capital of the Oriental Republic of Uruguay, at 23 days of September 1994, under the First Meeting of Mercosur Mining Metallurgical, meet representatives of the mining sector in the countries signed the Treaty of Asuncion , attended as observers, authorities of the Republic of Bolivia and Ecuador and representatives of the productive labor, legislative and research. The primary objective is to integrate the mining sectors of those countries, taking into account the specificity of the mining, given by the resource it uses, the need for high-risk investment with slow recoveries of capital and infrastructure problems, taking into account leverage and its remarkable impact on the development of regional economies.

  17. Mine-induced seismicity at East-Rand proprietary mines

    CSIR Research Space (South Africa)

    Milev, AM

    1995-09-01

    Full Text Available Mining results in seismic activity of varying intensity, from small micro seismic events to larger seismic events, often associated with significant seismic induced damages. This work deals with the understanding of the present seismicity...

  18. Radiological characterization of a uranium mine with no mining activity

    International Nuclear Information System (INIS)

    Lozano, J.C.; Vera Tome, F.; Gomez Escobar, V.; Blanco Rodriguez, P.

    2000-01-01

    We report a radiological study of a uranium mine located in Extremadura, in the south-west of Spain, in which mining work had ceased. One interest in the work is that the results can be used as a reference for the future evaluation of the effects produced by the restoration program. The radiological parameters selected to estimate the impact of the inactive mine were: 222 Rn in air and water, 222 Rn exhalation, effective 226 Ra in soils and sediments, and natural uranium and 226 Ra in water. Chemical analyses of water samples and measurements of meteorological variables were also made. Average values of these radiological parameters are presented. We characterize the zone radiologically and estimate the influence of the mine on the basis of some of these parameters, while others are used to reflect the status of the installation, information which could be very useful in the near future when restoration is complete

  19. Domestic uranium mining and milling

    International Nuclear Information System (INIS)

    Anon.

    1983-01-01

    A field hearing was held in Riverton, Wyoming on the erosion of the state's uranium industry as production and capital investment have declined and inventories have continued to rise because of a shift to foreign suppliers. The result has been serious unemployment in Wyoming and a decline in uranium mines from 5400 in 1980 to the present 1200. The seven witnesses spoke for the mining industry and state and federal government. Among the issues raised were mining regulations and the cancellation of nuclear rejects which have impacted the health of the industry. Additional statements and a report supplied for the record follow their testimony

  20. Cost of mining Eastern coal

    International Nuclear Information System (INIS)

    Anon.

    1990-01-01

    This paper, Chapter 7.2.3 of the 'surface mining' reference book, gives an example of how the cost of mining a ton of coal is calculated. Conditions set down are for a coal tract of 50.6 ha in West Virginia, USA to be mined by the contour surface method, the seam being 101.6cm thick. Elements of the costing are: permitting and bonding costs, engineering and construction costs, equipment and other operating expenses (such as hauling and wheeling), royalties, direct taxes and fees, costs of revegetation, and employment costs (payroll and medical expenses). 5 tabs

  1. Occupational radiation safety in mining

    International Nuclear Information System (INIS)

    Stocker, H.

    1985-01-01

    The first International Conference on Occupational Radiation Safety in Mining was held three years ago in Golden, Colorado, U.S.A., and it provided an excellent forum for an exchange of information on the many scientific, technical and operational aspects of radiation safety in mining. I am aware of the broad spectrum of epidemiological, engineering and related studies which have been pursued during the past three years with a view to achieving further improvements in radiation protection and I expect that the information on these studies will contribute significantly to a wider understanding of subject, and in particular, the means by which radiation safety measures in mining can be optimized

  2. Third symposium on underground mining

    Energy Technology Data Exchange (ETDEWEB)

    None

    1977-01-01

    The Third Symposium on Underground Mining was held at the Kentucky Fair and Exposition Center, Louisville, KY, October 18--20, 1977. Thirty-one papers have been entered individually into EDB and ERA. The topics covered include mining system (longwall, shortwall, room and pillar, etc.), mining equipment (continuous miners, longwall equipment, supports, roof bolters, shaft excavation equipment, monitoring and control systems. Maintenance and rebuilding facilities, lighting systems, etc.), ventilation, noise abatement, economics, accidents (cost), dust control and on-line computer systems. (LTN)

  3. Mining High-Dimensional Data

    Science.gov (United States)

    Wang, Wei; Yang, Jiong

    With the rapid growth of computational biology and e-commerce applications, high-dimensional data becomes very common. Thus, mining high-dimensional data is an urgent problem of great practical importance. However, there are some unique challenges for mining data of high dimensions, including (1) the curse of dimensionality and more crucial (2) the meaningfulness of the similarity measure in the high dimension space. In this chapter, we present several state-of-art techniques for analyzing high-dimensional data, e.g., frequent pattern mining, clustering, and classification. We will discuss how these methods deal with the challenges of high dimensionality.

  4. Instant RubyMine assimilation

    CERN Document Server

    Jones, Dave

    2013-01-01

    Filled with practical, step-by-step instructions and clear explanations for the most important and useful tasks. Get the job done and learn as you go. A practical guide comprising of easy-to-follow recipes which provide concise and clear steps to help you enter the world of RubyMine.Instant RubyMine is ideal for you, if you are new to RubyMine or well acquainted with the technology. All you need is basic knowledge of writing in Ruby or Ruby on Rails.

  5. Mining and Reclamation Technology Symposium

    Energy Technology Data Exchange (ETDEWEB)

    None Available

    1999-06-24

    The Mining and Reclamation Technology Symposium was commissioned by the Mountaintop Removal Mining/Valley Fill Environmental Impact Statement (EIS) Interagency Steering Committee as an educational forum for the members of the regulatory community who will participate in the development of the EIS. The Steering Committee sought a balanced audience to ensure the input to the regulatory community reflected the range of perspectives on this complicated and emotional issue. The focus of this symposium is on mining and reclamation technology alternatives, which is one of eleven topics scheduled for review to support development of the EIS. Others include hydrologic, environmental, ecological, and socio-economic issues.

  6. 76 FR 54163 - Proximity Detection Systems for Continuous Mining Machines in Underground Coal Mines

    Science.gov (United States)

    2011-08-31

    ... Detection Systems for Continuous Mining Machines in Underground Coal Mines AGENCY: Mine Safety and Health... (except full-face continuous mining machines) with proximity detection systems. Miners working near..., each underground coal mine operator would be required to install proximity detection systems on...

  7. Interactive reliability assessment using an integrated reliability data bank

    International Nuclear Information System (INIS)

    Allan, R.N.; Whitehead, A.M.

    1986-01-01

    The logical structure, techniques and practical application of a computer-aided technique based on a microcomputer using floppy disc Random Access Files is described. This interactive computational technique is efficient if the reliability prediction program is coupled directly to a relevant source of data to create an integrated reliability assessment/reliability data bank system. (DG)

  8. Load Control System Reliability

    Energy Technology Data Exchange (ETDEWEB)

    Trudnowski, Daniel [Montana Tech of the Univ. of Montana, Butte, MT (United States)

    2015-04-03

    This report summarizes the results of the Load Control System Reliability project (DOE Award DE-FC26-06NT42750). The original grant was awarded to Montana Tech April 2006. Follow-on DOE awards and expansions to the project scope occurred August 2007, January 2009, April 2011, and April 2013. In addition to the DOE monies, the project also consisted of matching funds from the states of Montana and Wyoming. Project participants included Montana Tech; the University of Wyoming; Montana State University; NorthWestern Energy, Inc., and MSE. Research focused on two areas: real-time power-system load control methodologies; and, power-system measurement-based stability-assessment operation and control tools. The majority of effort was focused on area 2. Results from the research includes: development of fundamental power-system dynamic concepts, control schemes, and signal-processing algorithms; many papers (including two prize papers) in leading journals and conferences and leadership of IEEE activities; one patent; participation in major actual-system testing in the western North American power system; prototype power-system operation and control software installed and tested at three major North American control centers; and, the incubation of a new commercial-grade operation and control software tool. Work under this grant certainly supported the DOE-OE goals in the area of “Real Time Grid Reliability Management.”

  9. Microprocessor hardware reliability

    Energy Technology Data Exchange (ETDEWEB)

    Wright, R I

    1982-01-01

    Microprocessor-based technology has had an impact in nearly every area of industrial electronics and many applications have important safety implications. Microprocessors are being used for the monitoring and control of hazardous processes in the chemical, oil and power generation industries, for the control and instrumentation of aircraft and other transport systems and for the control of industrial machinery. Even in the field of nuclear reactor protection, where designers are particularly conservative, microprocessors are used to implement certain safety functions and may play increasingly important roles in protection systems in the future. Where microprocessors are simply replacing conventional hard-wired control and instrumentation systems no new hazards are created by their use. In the field of robotics, however, the microprocessor has opened up a totally new technology and with it has created possible new and as yet unknown hazards. The paper discusses some of the design and manufacturing techniques which may be used to enhance the reliability of microprocessor based systems and examines the available reliability data on lsi/vlsi microcircuits. 12 references.

  10. Supply chain reliability modelling

    Directory of Open Access Journals (Sweden)

    Eugen Zaitsev

    2012-03-01

    Full Text Available Background: Today it is virtually impossible to operate alone on the international level in the logistics business. This promotes the establishment and development of new integrated business entities - logistic operators. However, such cooperation within a supply chain creates also many problems related to the supply chain reliability as well as the optimization of the supplies planning. The aim of this paper was to develop and formulate the mathematical model and algorithms to find the optimum plan of supplies by using economic criterion and the model for the probability evaluating of non-failure operation of supply chain. Methods: The mathematical model and algorithms to find the optimum plan of supplies were developed and formulated by using economic criterion and the model for the probability evaluating of non-failure operation of supply chain. Results and conclusions: The problem of ensuring failure-free performance of goods supply channel analyzed in the paper is characteristic of distributed network systems that make active use of business process outsourcing technologies. The complex planning problem occurring in such systems that requires taking into account the consumer's requirements for failure-free performance in terms of supply volumes and correctness can be reduced to a relatively simple linear programming problem through logical analysis of the structures. The sequence of the operations, which should be taken into account during the process of the supply planning with the supplier's functional reliability, was presented.

  11. Rapid Evaluation of Radioactive Contamination in Rare Earth Mine Mining

    Science.gov (United States)

    Wang, N.

    2017-12-01

    In order to estimate the current levels of environmental radioactivity in Bayan Obo rare earth mine and to study the rapid evaluation methods of radioactivity contamination in the rare earth mine, the surveys of the in-situ gamma-ray spectrometry and gamma dose rate measurement were carried out around the mining area and living area. The in-situ gamma-ray spectrometer was composed of a scintillation detector of NaI(Tl) (Φ75mm×75mm) and a multichannel analyzer. Our survey results in Bayan Obo Mine display: (1) Thorium-232 is the radioactive contamination source of this region, and uranium-238 and potassium - 40 is at the background level. (2) The average content of thorium-232 in the slag of the tailings dam in Bayan Obo is as high as 276 mg/kg, which is 37 times as the global average value of thorium content. (3) We found that the thorium-232 content in the soil in the living area near the mining is higher than that in the local soil in Guyang County. The average thorium-232 concentrations in the mining areas of the Bayan Obo Mine and the living areas of the Bayan Obo Town were 18.7±7.5 and 26.2±9.1 mg/kg, respectively. (4) It was observed that thorium-232 was abnormal distributed in the contaminated area near the tailings dam. Our preliminary research results show that the in-situ gamma-ray spectrometry is an effective approach of fast evaluating rare earths radioactive pollution, not only can the scene to determine the types of radioactive contamination source, but also to measure the radioactivity concentration of thorium and uranium in soil. The environmental radioactive evaluation of rare earth ore and tailings dam in open-pit mining is also needed. The research was supported by National Natural Science Foundation of China (No. 41674111).

  12. System design and equipment reliability for wide web working at Hem Heath Colliery

    Energy Technology Data Exchange (ETDEWEB)

    Hall, L

    1982-02-01

    This paper outlines the challenge to mining engineers on system design and reliability of equipment and how Hem Heath Colliery in the UK, is meeting this challenge, by describing current systems of work and equipment on the faces, summarising experience gained with succeeding faces, the results achieved, and posing considerations for the future.

  13. OSS reliability measurement and assessment

    CERN Document Server

    Yamada, Shigeru

    2016-01-01

    This book analyses quantitative open source software (OSS) reliability assessment and its applications, focusing on three major topic areas: the Fundamentals of OSS Quality/Reliability Measurement and Assessment; the Practical Applications of OSS Reliability Modelling; and Recent Developments in OSS Reliability Modelling. Offering an ideal reference guide for graduate students and researchers in reliability for open source software (OSS) and modelling, the book introduces several methods of reliability assessment for OSS including component-oriented reliability analysis based on analytic hierarchy process (AHP), analytic network process (ANP), and non-homogeneous Poisson process (NHPP) models, the stochastic differential equation models and hazard rate models. These measurement and management technologies are essential to producing and maintaining quality/reliable systems using OSS.

  14. Transit ridership, reliability, and retention.

    Science.gov (United States)

    2008-10-01

    This project explores two major components that affect transit ridership: travel time reliability and rider : retention. It has been recognized that transit travel time reliability may have a significant impact on : attractiveness of transit to many ...

  15. Travel reliability inventory for Chicago.

    Science.gov (United States)

    2013-04-01

    The overarching goal of this research project is to enable state DOTs to document and monitor the reliability performance : of their highway networks. To this end, a computer tool, TRIC, was developed to produce travel reliability inventories from : ...

  16. Clean energy from a reliable source. Feasibility study on the use of geothermal heat from mine water for the city park Oranje Nassau and Heerlerheide Centre, Netherlands; Schone energie uit vertrouwde bron. Onderzoek naar de haalbaarheid van het benutten van aardwarmte uit het mijnwater voor het Stadspark Oranje Nassau en Heerlerheide Centrum

    Energy Technology Data Exchange (ETDEWEB)

    Gommans, L.J.J.H.M. [Milieukundig Onderzoeks- en Ontwerp Buro BOOM, Maastricht (Netherlands); Kempen, G.W.P.J. [ARPAS Energy Contracting, Sittard (Netherlands); Van Tongeren, P.C.H. [Vlaamse Instelling voor Technologisch Onderzoek VITO, Mol (Belgium)

    2003-03-26

    The aim of the study on the title subject is to gain insight into the feasibility to use water from mines as a source for renewable energy and/or energy storage in an overall energy plan for the city Heerlen in the Netherlands. [Dutch] Het doel van de voorliggende studie is om inzicht te geven in de haalbaarheid om (aard)warmte middels het gebruik van mijnwater in te zetten als bron van duurzame energie en/of energieopslag binnen het plan 'centrum noord' voor Heerlen. Er wordt van uitgegaan dat er door de voormalige mijnbouwactiviteiten ondergronds een relatief grillig, door mensen gevormd kunstmatig reservoir is ontstaan, dat gevuld is met relatief warm water. Voor een goed inzicht in het type reservoir (opbouw) en het - vermoedelijke - reservoirgedrag, wordt in deze studie een analyse gegeven van de belangrijkste onderdelen van het reservoir, alsmede van die factoren die het reservoirgedrag (mede) sterk (kunnen) beinvloeden. Zaken als verwachte porositeiten, permeabiliteiten en reservoirvolume komen hierbij aan de orde. Eveneens wordt de gevonden informatie over watertemperatuur, chemische samenstelling, e.d, behandeld. Een beperkt deel van de voormalige mijninfrastructuur is gedigitaliseerd en de digitale gegevens zijn ondergebracht in een Geografisch Informatie Systeem (GIS). Tevens zijn in de rapportage enkele conceptuele mogelijkheden voor warmtewinning en/of opslag m.b.t. de lokale ondergrond aangegeven en worden bij een aantal aspecten de mogelijke risico's aangegeven.

  17. Data Mining Tools in Science Education

    OpenAIRE

    Premysl Zaskodny

    2012-01-01

    The main principle of paper is Data Mining in Science Education (DMSE) as Problem Solving. The main goal of paper is consisting in Delimitation of Complex Data Mining Tool and Partial Data Mining Tool of DMSE. The procedure of paper is consisting of Data Preprocessing in Science Education, Data Processing in Science Education, Description of Curricular Process as Complex Data Mining Tool (CP-DMSE), Description of Analytical Synthetic Modeling as Partial Data Mining Tool (ASM-DMSE) and finally...

  18. Biodiversity loss from deep-sea mining

    OpenAIRE

    C. L. Van Dover; J. A. Ardron; E. Escobar; M. Gianni; K. M. Gjerde; A. Jaeckel; D. O. B. Jones; L. A. Levin; H. Niner; L. Pendleton; C. R. Smith; T. Thiele; P. J. Turner; L. Watling; P. P. E. Weaver

    2017-01-01

    The emerging deep-sea mining industry is seen by some to be an engine for economic development in the maritime sector. The International Seabed Authority (ISA) – the body that regulates mining activities on the seabed beyond national jurisdiction – must also protect the marine environment from harmful effects that arise from mining. The ISA is currently drafting a regulatory framework for deep-sea mining that includes measures for environmental protection. Responsible mining increasingly stri...

  19. Uran production at the Drosen mine

    International Nuclear Information System (INIS)

    Sittner, Helmar; Duschek, Bernd

    2009-01-01

    In September 1950, SAG Wismuth started the geological and mining work at the area Ronneburg. In the year 1982, the last mine at Drosen took up the underground mining. Still no empirical values were present for the controlling of the underground production. The contribution under consideration reports on first efforts to the determination of geological-qualitative indices of uranium exploitation. At 1st September, 1982, the pits 403 and 415 of the mine Drosen took up the underground mining of uranium

  20. Route survey periodicity for mine warfare

    OpenAIRE

    Coke, Hartwell F.

    2009-01-01

    Approved for public release, distribution unlimited One of the Navy's most long standing challenges has been conquering the mine warfare threat. As mines and mine warfare techniques evolve and become more sophisticated, so does the United States' ability to counter the threat. The United States newest technique for countering a potential mined harbor, or route, is a process known as "change detection." This concept uses previous side scan sonar images of the area prior to a mining event an...

  1. Data mining theories, algorithms, and examples

    CERN Document Server

    Ye, Nong

    2013-01-01

    AN OVERVIEW OF DATA MINING METHODOLOGIESIntroduction to data mining methodologiesMETHODOLOGIES FOR MINING CLASSIFICATION AND PREDICTION PATTERNSRegression modelsBayes classifiersDecision treesMulti-layer feedforward artificial neural networksSupport vector machinesSupervised clusteringMETHODOLOGIES FOR MINING CLUSTERING AND ASSOCIATION PATTERNSHierarchical clusteringPartitional clusteringSelf-organized mapProbability distribution estimationAssociation rulesBayesian networksMETHODOLOGIES FOR MINING DATA REDUCTION PATTERNSPrincipal components analysisMulti-dimensional scalingLatent variable anal

  2. Inductive learning as a fusion engine for mine detection

    Energy Technology Data Exchange (ETDEWEB)

    Kercel, S.W.; Dress, W.B.

    1997-08-01

    Semiotics is defined by some researchers as {open_quotes}the study of the appearance (visual or otherwise) meaning, and use of symbols and symbol systems.{close_quotes} Semiotic fusion of data from multiple sensory sources is a potential solution to the problem of landmine detection. This turns out to be significant, because notwithstanding the diversity of sensor technologies being used to attack the problem, there is no single effective landmine sensor technology. The only practical, general-purpose mine detector presently available is the trained dog. Most research into mine-detection technology seeds to emulate the dog`s seemingly uncanny abilities. An ideal data-fusion system would mimic animal reaction, with the brain`s perceptive power melding multiple sensory cues into an awareness of the size and location of a mine. Furthermore, the fusion process should be adaptive, with the skill at combining cues into awareness improving with experience. Electronic data-fusion systems reported in the countermine literature use conventional vector-based pattern recognition methods. Although neural nets are popular, they have never satisfactorily met the challenge. Despite years of investigation, nobody has ever found a vector space representation that reliably characterizes mine identity. This strongly suggests that the features have not been found because researchers have been looking for the wrong characteristics. It is worth considering that dogs probably do not represent data as mathematical number lists, but they almost certainly represent data via semiotic structures.

  3. Mining and mining authorities in Saarland 2016. Mining economy, mining technology, occupational safety, environmental protection, statistics, mining authority activities. Annual report; Bergbau und Bergbehoerden im Saarland 2016. Bergwirtschaft, Bergtechnik, Arbeitsschutz, Umweltschutz, Statistiken, Taetigkeiten der Bergbehoerden. Jahresbericht

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2016-07-01

    The annual report of the Saarland Upper Mining Authority provides an insight into the activities of mining authorities. Especially, the development of the black coal mining, safety and technology of mining as well as the correlation between mining and environment are stressed.

  4. Data preprocessing in data mining

    CERN Document Server

    García, Salvador; Herrera, Francisco

    2015-01-01

    Data Preprocessing for Data Mining addresses one of the most important issues within the well-known Knowledge Discovery from Data process. Data directly taken from the source will likely have inconsistencies, errors or most importantly, it is not ready to be considered for a data mining process. Furthermore, the increasing amount of data in recent science, industry and business applications, calls to the requirement of more complex tools to analyze it. Thanks to data preprocessing, it is possible to convert the impossible into possible, adapting the data to fulfill the input demands of each data mining algorithm. Data preprocessing includes the data reduction techniques, which aim at reducing the complexity of the data, detecting or removing irrelevant and noisy elements from the data. This book is intended to review the tasks that fill the gap between the data acquisition from the source and the data mining process. A comprehensive look from a practical point of view, including basic concepts and surveying t...

  5. Hazard mitigation in coal mines

    Science.gov (United States)

    Rashmi, R. V.; Devalal, Shilpa; Jacob, Anjali; Vidhyapathi, C. M.

    2017-11-01

    Today’s world witnesses increased number of mine accidents caused due to explosion and fire. When the methane gas concentration goes high, it causes fire leading to explosion. In this paper, an IoT based system is proposed to ensure safety to the mine workers in underground collieries. The proposed system consists of DHT-11 sensor to monitor the temperature and humidity of coal mines. When the gas sensor detects high methane gas level, blower is activated so that the atmospheric air can be pumped in from outside to dilute the gas concentration. The smoke sensor is also used to detect the fire. In case of any abnormality in any of these parameters the buzzer sounds. All these parameters are uploaded to the cloud directly so that the people at the control station can be well informed of the underground mines.

  6. Privacy Preserving Distributed Data Mining

    Data.gov (United States)

    National Aeronautics and Space Administration — Distributed data mining from privacy-sensitive multi-party data is likely to play an important role in the next generation of integrated vehicle health monitoring...

  7. BLM Colorado Mining Claims Closed

    Data.gov (United States)

    Department of the Interior — Shapefile Format –This data set consists of closed mining claim records extracted from BLM’s LR2000 database. These records contain case attributes as well as legal...

  8. Large Mines and the Community

    International Development Research Centre (IDRC) Digital Library (Canada)

    Latin America: costs and benefits of the mining operations ...... in Argentina and Venezuela reached 30 percent, Peru 38 percent and Mexico between 35 .... childbirth facilities, an isolation ward, and a laboratory for the detection of tuberculosis.

  9. When process mining meets bioinformatics

    NARCIS (Netherlands)

    Jagadeesh Chandra Bose, R.P.; Aalst, van der W.M.P.; Nurcan, S.

    2011-01-01

    Process mining techniques can be used to extract non-trivial process related knowledge and thus generate interesting insights from event logs. Similarly, bioinformatics aims at increasing the understanding of biological processes through the analysis of information associated with biological

  10. BLM Colorado Mining Claims Active

    Data.gov (United States)

    Department of the Interior — Shapefile Format –This data set consists of active mining claim records extracted from BLM’s LR2000 database. These records contain case attributes as well as legal...

  11. Practical graph mining with R

    CERN Document Server

    Hendrix, William; Jenkins, John; Padmanabhan, Kanchana; Chakraborty, Arpan

    2014-01-01

    Practical Graph Mining with R presents a "do-it-yourself" approach to extracting interesting patterns from graph data. It covers many basic and advanced techniques for the identification of anomalous or frequently recurring patterns in a graph, the discovery of groups or clusters of nodes that share common patterns of attributes and relationships, the extraction of patterns that distinguish one category of graphs from another, and the use of those patterns to predict the category of new graphs. Hands-On Application of Graph Data Mining Each chapter in the book focuses on a graph mining task, such as link analysis, cluster analysis, and classification. Through applications using real data sets, the book demonstrates how computational techniques can help solve real-world problems. The applications covered include network intrusion detection, tumor cell diagnostics, face recognition, predictive toxicology, mining metabolic and protein-protein interaction networks, and community detection in social networks. De...

  12. The handbook of data mining

    CERN Document Server

    Ye, Nong

    2003-01-01

    This bk is the 1st comprehensive one to feature systematic coverage of the concepts, techniques, examples, issues, software tools and future advancements of data mining. The demand for DM apps are increasing in indus, gov, & academia.

  13. Mining Upgrades to Reduce Pollution

    Science.gov (United States)

    Settlement with Southern Coal Corporation and 26 affiliates requires the companies to comprehensively upgrade their coal mining and processing operations to prevent polluted wastewater from threatening rivers and streams and communities across Appalachia.

  14. The case against uranium mining

    International Nuclear Information System (INIS)

    Robotham, F.P.

    1980-01-01

    Australia is a potential uranium supplier. The case against uranium mining is presented. Biological effects of radiation, risks involved in reactor operation and the problems of waste disposal are discussed

  15. Technology overview of mined repositories

    International Nuclear Information System (INIS)

    Gimera, R.; Thirumalai, K.

    1982-01-01

    Mined repositories present an environmentally viable option for permanent disposal of nuclear waste. This paper reviews the state-of-the-art mining technologies and identifies technological issues and developments necessary to mine a repository in basalt. The thermal loading, isolation, and retrieval requirements of a repository present unique technological challenges unknown to conventional mining practice. The technology issues and developments required in the areas of excavation, roof and ground support, equipment development, instrumentation development, and sealing are presented. Performance assessment methods must be developed to evaluate the adequacies of technologies developed to design, construct, operate, and decommission a repository. A stepwise test-and-development approach is used in the Basalt Waste Isolation Project to develop cost-effective technologies for a repository

  16. 30 CFR 49.20 - Requirements for all coal mines.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Requirements for all coal mines. 49.20 Section... TRAINING MINE RESCUE TEAMS Mine Rescue Teams for Underground Coal Mines § 49.20 Requirements for all coal mines. (a) The operator of each underground coal mine shall make available two certified mine rescue...

  17. 2017 NREL Photovoltaic Reliability Workshop

    Energy Technology Data Exchange (ETDEWEB)

    Kurtz, Sarah [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

    2017-08-15

    NREL's Photovoltaic (PV) Reliability Workshop (PVRW) brings together PV reliability experts to share information, leading to the improvement of PV module reliability. Such improvement reduces the cost of solar electricity and promotes investor confidence in the technology -- both critical goals for moving PV technologies deeper into the electricity marketplace.

  18. AECL's reliability and maintainability program

    International Nuclear Information System (INIS)

    Wolfe, W.A.; Nieuwhof, G.W.E.

    1976-05-01

    AECL's reliability and maintainability program for nuclear generating stations is described. How the various resources of the company are organized to design and construct stations that operate reliably and safely is shown. Reliability and maintainability includes not only special mathematically oriented techniques, but also the technical skills and organizational abilities of the company. (author)

  19. Learning data mining with R

    CERN Document Server

    Makhabel, Bater

    2015-01-01

    This book is intended for the budding data scientist or quantitative analyst with only a basic exposure to R and statistics. This book assumes familiarity with only the very basics of R, such as the main data types, simple functions, and how to move data around. No prior experience with data mining packages is necessary; however, you should have a basic understanding of data mining concepts and processes.

  20. Methane emissions from coal mining

    International Nuclear Information System (INIS)

    Williams, A.; Mitchell, C.

    1993-01-01

    This paper outlines some of the problems associated with the prediction of levels of methane emission from underground and surface coal mines. Current knowledge of coal mining emissions sources is outlined. On the basis of this information the methodology proposed by the IPCC/OECD Programme on National Inventories is critically examined and alternatives considered. Finally, the technical options for emissions control are examined together with their feasibility. 8 refs., 6 figs., 2 tabs

  1. Water pollution from abandoned mines

    OpenAIRE

    Iversen, E.; Johannessen, M.

    1987-01-01

    The report provides a country-wide overview of abandoned pyrite mines where operations have been fairly extensive. The water pollution situation is assessed on the basis of reported investigations, inspections and chemical analyses from the individual areas. In cases where larger watercourses (Orkla, Gaula), and the upper stretch of the Glåma are affected the situation appears to be adequately described. However abandoned mine areas may also cause local pollution problems, and here documentat...

  2. Numerical modelling of mine workings.

    CSIR Research Space (South Africa)

    Lightfoot, N

    1999-03-01

    Full Text Available to cover most of what is required for a practising rock mechanics engineer to be able to use any of these five programs to solve practical mining problems. The chapters on specific programs discuss their individual strengths and weaknesses and highlight... and applications of numerical modelling in the context of the South African gold and platinum mining industries. This includes an example that utilises a number of different numerical 3 modelling programs to solve a single problem. This particular example...

  3. Business of reliability

    Science.gov (United States)

    Engel, Pierre

    1999-12-01

    The presentation is organized around three themes: (1) The decrease of reception equipment costs allows non-Remote Sensing organization to access a technology until recently reserved to scientific elite. What this means is the rise of 'operational' executive agencies considering space-based technology and operations as a viable input to their daily tasks. This is possible thanks to totally dedicated ground receiving entities focusing on one application for themselves, rather than serving a vast community of users. (2) The multiplication of earth observation platforms will form the base for reliable technical and financial solutions. One obstacle to the growth of the earth observation industry is the variety of policies (commercial versus non-commercial) ruling the distribution of the data and value-added products. In particular, the high volume of data sales required for the return on investment does conflict with traditional low-volume data use for most applications. Constant access to data sources supposes monitoring needs as well as technical proficiency. (3) Large volume use of data coupled with low- cost equipment costs is only possible when the technology has proven reliable, in terms of application results, financial risks and data supply. Each of these factors is reviewed. The expectation is that international cooperation between agencies and private ventures will pave the way for future business models. As an illustration, the presentation proposes to use some recent non-traditional monitoring applications, that may lead to significant use of earth observation data, value added products and services: flood monitoring, ship detection, marine oil pollution deterrent systems and rice acreage monitoring.

  4. Mining Taxation in Colombia

    Directory of Open Access Journals (Sweden)

    Duanjie Chen

    2015-02-01

    Full Text Available This paper first assesses the current Colombian mining tax-and-royalty regime in comparison with other countries from the points of view of efficiency, competitiveness and revenue performance. It then discusses the theoretical convenience of introducing alternative designs for a resource rent tax (RRT to be applied to new mining projects, together with a reduced common royalty rate for all minerals, and simulates their potential efficiency, competitiveness and revenue-performance effects. In particular, it examines alternative interactions between the RRT, the royalty regime and the corporate income tax (royalties creditable against the RRT or deductible from its tax base; accepting or not corporate income tax deductibility from the RRT tax base, under alternative RRT tax rates. It also discusses alternative capital return allowances and the pros and cons of project-by-project versus sectorial ring fencing, and sharing RRT revenues between the national and sub-national governments. It concludes with a detailed blueprint for reform based on these discussions, assessments and simulations, as well as political economy and administrative considerations for the specific case of Colombia. Este trabajo evalúa la eficiencia, competitividad y capacidad de recaudo del régimen tributario y de regalías colombiano en comparación con el de otros países mineros relevantes. Posteriormente, propone la implementación de un “Resource Rent Tax” (RRT para proyectos mineros futuros (junto con una reducción y unificación de la tasa de regalías entre minerales y modela el impacto que tendría éste sobre la eficiencia y el recaudo. Se examinan la interacción entre el RRT, las regalías y el impuesto de renta bajo distintos diseños y tasas de RRT y costo de oportunidad del capital. También se analiza si es preferible tener “ringfencing” a nivel de proyecto o a nivel sectorial. El trabajo concluye con una propuesta de reforma junto con consideraciones

  5. Abandoned Uranium Mine (AUM) Priority Mines with Enforcement Actions, Navajo Nation, 2016, US EPA Region 9

    Data.gov (United States)

    U.S. Environmental Protection Agency — There are 13 mines total that have enforcement actions and are classified as priority mines. USEPA and NNEPA prioritized 46 mines based on gamma radiation levels,...

  6. Minimizing the Impact of Mining Activities for Sustainable Mined-Out ...

    African Journals Online (AJOL)

    Minimizing the Impact of Mining Activities for Sustainable Mined-Out Area ... sensing and Geographical Information System (GIS) in assessing environmental impact of ... Keywords: Solid mineral, Impact assessment, Mined-out area utilization, ...

  7. Environmental laws for mining activities in Provincia de San Juan (Argentina), gravel mines exploitation

    International Nuclear Information System (INIS)

    Ramirez, M.; Carrascosa, H.

    2007-01-01

    This paper analyses San Juan Province - Argentina prevailing environmental legislation for mining activity and gravel mines. The study focuses the subject from a mining engineering point of view. (author)

  8. Abandoned Uranium Mine (AUM) Trust Mine Points, Navajo Nation, 2016, US EPA Region 9

    Data.gov (United States)

    U.S. Environmental Protection Agency — This GIS dataset contains point features that represent mines included in the Navajo Environmental Response Trust. This mine category also includes Priority mines....

  9. Mining in Austria in 1992

    International Nuclear Information System (INIS)

    Moser, P.

    1994-01-01

    The mineral production of Austria, in 1992 - as far as under the supervision of the Austrian Mine Inspectorate, run up to about 50 million t of solid minerals, 1.2 million t of oil and 1.4 billion m 3 of natural gas. 88% of the solid minerals comprised industrial minerals, 4% metals, 4% salt and 4% coal. The solid minerals were produced by 352 open pits and 15 underground mines. 3 of the operations worked both on surface and underground and one mine is a well field operation. In total around 8000 people were employed in the field of mining and mineral processing. The minerals produced represent a value of about 15 billion Austrian Schillings (about 1.25 billion US $), the major part being the industrial minerals sector with a share of 7 billion Austrian Schillings and oil and gas with around 4 billion Austrian Schillings. The industrial minerals sector does not play only in Austrian an important role, but contributes also remarkably to the world production. This comprises mainly magnesite, talc, kaolin and graphite where Austria produces more than 1% of the world production. Summarizing, it can be said that the future of the Austrian mining sector is quite prosperous, perhaps better than in some other traditional mining countries in Europe, where the change from the coal and base metals sector towards the industrial sector has not come so far. (orig.) [de

  10. Mine waste disposal and managements

    Energy Technology Data Exchange (ETDEWEB)

    Cheong, Young Wook; Min, Jeong Sik; Kwon, Kwang Soo; Kim, Ok Hwan; Kim, In Kee; Song, Won Kyong; Lee, Hyun Joo [Korea Institute of Geology Mining and Materials, Taejon (Korea)

    1998-12-01

    Acid Rock Drainage (ARD) is the product formed by the atmospheric oxidation of the relatively common pyrite and pyrrhotite. Waste rock dumps and tailings containing sulfide mineral have been reported at toxic materials producing ARD. Mining in sulphide bearing rock is one of activity which may lead to generation and release of ARD. ARD has had some major detrimental affects on mining areas. The purpose of this study was carried out to develop disposal method for preventing contamination of water and soil environment by waste rocks dump and tailings, which could discharge the acid drainage with high level of metals. Scope of this study was as following: environmental impacts by mine wastes, geochemical characteristics such as metal speciation, acid potential and paste pH of mine wastes, interpretation of occurrence of ARD underneath tailings impoundment, analysis of slope stability of tailings dam etc. The following procedures were used as part of ARD evaluation and prediction to determine the nature and quantities of soluble constituents that may be washed from mine wastes under natural precipitation: analysis of water and mine wastes, Acid-Base accounting, sequential extraction technique and measurement of lime requirement etc. In addition, computer modelling was applied for interpretation of slope stability od tailings dam. (author). 44 refs., 33 tabs., 86 figs.

  11. Development of mining at Jaduguda

    International Nuclear Information System (INIS)

    Bhasin, J.L.

    1991-01-01

    The paper deals with the development of mining and other infrastructural activities of the underground mine at Jaduguda. In the beginning open and shrinkage methods were used but gradually changed to Cut and Fill method, the fill being the deslimed mill tailings. This method gives much better recovery and provides adequate support to the worked out areas. The main entry to the mine is via a vertical shaft, 640 meters deep. The winders for ore hoisting and the services are installed on top of the concrete tower constructed above the shaft. As the winders are the life line of the mine, a high standard of maintenance is maintained. As the mine is located at the foot hill, there is a fair amount of seepage water. The seepage and the water from the fill is pumped to surface in stages. The sumps at various levels are designed to provide storage capacity. From time to time, the technological improvements in the various mining operations are brought about. The drilling of uppers by stope wagons, use of tyre mounted loaders in the stopes, use of ammonium nitrate for blasting purposes, the use of full column grout bolts are some examples. Studies are also conducted in the ground control in underground. Constant efforts are made to improve the support system. The training courses are regularly arranged for workers to update their skills. As the job in underground is hazardous, the workers are trained in the correct and safe methods of doing the various jobs. (author). 10 figs

  12. Text Mining in Organizational Research.

    Science.gov (United States)

    Kobayashi, Vladimer B; Mol, Stefan T; Berkers, Hannah A; Kismihók, Gábor; Den Hartog, Deanne N

    2018-07-01

    Despite the ubiquity of textual data, so far few researchers have applied text mining to answer organizational research questions. Text mining, which essentially entails a quantitative approach to the analysis of (usually) voluminous textual data, helps accelerate knowledge discovery by radically increasing the amount data that can be analyzed. This article aims to acquaint organizational researchers with the fundamental logic underpinning text mining, the analytical stages involved, and contemporary techniques that may be used to achieve different types of objectives. The specific analytical techniques reviewed are (a) dimensionality reduction, (b) distance and similarity computing, (c) clustering, (d) topic modeling, and (e) classification. We describe how text mining may extend contemporary organizational research by allowing the testing of existing or new research questions with data that are likely to be rich, contextualized, and ecologically valid. After an exploration of how evidence for the validity of text mining output may be generated, we conclude the article by illustrating the text mining process in a job analysis setting using a dataset composed of job vacancies.

  13. Web Mining and Social Networking

    DEFF Research Database (Denmark)

    Xu, Guandong; Zhang, Yanchun; Li, Lin

    This book examines the techniques and applications involved in the Web Mining, Web Personalization and Recommendation and Web Community Analysis domains, including a detailed presentation of the principles, developed algorithms, and systems of the research in these areas. The applications of web ...... sense of individuals or communities. The volume will benefit both academic and industry communities interested in the techniques and applications of web search, web data management, web mining and web knowledge discovery, as well as web community and social network analysis.......This book examines the techniques and applications involved in the Web Mining, Web Personalization and Recommendation and Web Community Analysis domains, including a detailed presentation of the principles, developed algorithms, and systems of the research in these areas. The applications of web...... mining, and the issue of how to incorporate web mining into web personalization and recommendation systems are also reviewed. Additionally, the volume explores web community mining and analysis to find the structural, organizational and temporal developments of web communities and reveal the societal...

  14. Study on remote control technology of airflow during a mine fire

    Energy Technology Data Exchange (ETDEWEB)

    Wang, D.; Wang, Y; Zhou, Y.; Zhou, F. [China University of Mining and Technology, Jiangsu (China). College of Mineral and Energy Resource

    2001-07-01

    In order to realize remote control of airflow during a mine fire and minimize fire losses, two kinds of the airflow remote control systems have been developed. One uses compressed air as power source, and transmits control signals by a monitor system for mine environment. Another uses electric power and transmits control signals through a telephone network underground. The mine door controllers of the remote airflow controlling systems are developed with a single-chip microcomputer. Then the controller can not only do logical analysis and judgement, but also has a strong anti-disturb ability and sufficient reliability. The two kinds of airflow remote control system have been successfully applied in some coal mines in China. Their effects of running are very good. 2 refs., 5 figs.

  15. Proceedings of the 1. international workshop on energy management in the mining industry 2010: Enermin

    International Nuclear Information System (INIS)

    2010-01-01

    The first international workshop on energy management in the mining industry, ENERMIN 2010, was held in Santiago, Chile, from November 14th to November 16th, 2010. The purpose of this conference, organized by Gecamin, was to gather experts from the mining industry to analyse some of the principal aspects of reliable, sustainable and low-cost energy supply and the efficient use of energy in mining and metallurgical processes. The conference was attended by over 160 professionals and experts from 11 different countries and participants had the opportunity to hear about some of the latest technologies and to discuss different issues relating to efficient energy use in the mining industry with other experts. 25 out of the 31 papers presented during this conference have been catalogued separately for inclusion in this database

  16. ENVIRONMENTAL IMPACT ASSESSMENT OF LAND USE PLANING AROUND THE LEASED LIMESTONE MINE USING REMOTE SENSING TECHNIQUES

    Directory of Open Access Journals (Sweden)

    P. Ranade

    2007-01-01

    Full Text Available Mining activities and the waste products produced can have significant impact on the surrounding environment - ranging from localized surface and ground water contamination to the damaging effects of airborne pollutants on the regional ecosystem. The long term monitoring of environmental impacts requires a cost effective method to characterize land cover and land cover changes over time. As per the guidelines of Ministry of Environment and Forest, Govt. of India, it is mandatory to study and analyze the impacts of mining on its surroundings. The use of remote sensing technology to generate reliable land cover maps is a valuable asset to completing environmental assessments over mining affected areas. In this paper, a case study has been discussed to study the land use – land cover status around 10 Km radius of open cast limestone mine area and the subsequent impacts on environmental as well as social surroundings.

  17. Forced cooling of a nuclear waste repository mine drift - a scoping analysis

    Energy Technology Data Exchange (ETDEWEB)

    Boyd, R D [Sandia National Labs., Albuquerque, NM (USA)

    1982-12-01

    Nuclear waste repositories, with decay heat generation beneath the mine drift floors, are force-cooled with air so that re-entrance is possible many years after the waste has been buried. A numerical model has been developed which uses heat transfer coefficients as input. It has been demonstrated that mixed (forced and free) convective and surface roughness effects are significant and must be included in future experiments if reliable predictions are to be made of the time required to cool the repository. For example, when repository mine drifts in volcanic tuff are force-cooled, with forced convection being the only energy transport mechanism, it takes approx.= 0.1 year to cool the mine surface to a safe temperature. However, when mixed convection is the primary transport mechanism it takes approx.= 1.0 year to cool the mine. In addition to mixed convection, other effects are delineated.

  18. Electronics reliability calculation and design

    CERN Document Server

    Dummer, Geoffrey W A; Hiller, N

    1966-01-01

    Electronics Reliability-Calculation and Design provides an introduction to the fundamental concepts of reliability. The increasing complexity of electronic equipment has made problems in designing and manufacturing a reliable product more and more difficult. Specific techniques have been developed that enable designers to integrate reliability into their products, and reliability has become a science in its own right. The book begins with a discussion of basic mathematical and statistical concepts, including arithmetic mean, frequency distribution, median and mode, scatter or dispersion of mea

  19. 76 FR 27355 - Agency Information Collection Activities; Submission for OMB Review; Comment Request; Mine...

    Science.gov (United States)

    2011-05-11

    ... comprehensive and reliable occupational data available concerning the mining industry. This submission has been... miners. Accident, injury, and illness data, when correlated with employment and production data, provide information that allows the MSHA to improve its safety and health enforcement programs, focus its education...

  20. Mining and characterization of microsatellites from a genome of Venturia carpophila

    Science.gov (United States)

    A total of 4,021 microsatellites were mined from a genome of Venturia carpophila and 192 were selected to screen 39 isolates of the fungus collected from peach and nectarine in the southeastern USA. Of the 192 selected, 32 primers consistently and reliably produced polymorphic amplicons. Subsequentl...

  1. Assessment of rock mass characteristics and the excavation disturbed zone in the Lingxin Coal Mine beneath the Xitian river, China

    International Nuclear Information System (INIS)

    Xingping Lai

    2006-01-01

    Safe production and induced hazard prevention in coal mines mainly concern problems in the excavation disturbed zone (EDZ), but coal mining can also make a significant impact on the environment. Comprehensive techniques using a borehole TV viewer system, electrical logging, and monitoring of drilling fluid leakage offer the ability to identify changing geological conditions and the location of any nearby abandoned mining workings. The inner collapsed zone and the expanding height of the crack zone transmitting water plus their spatial distribution after excavating the superincumbent coal seam stratum are determined at no. L3414 workings, Lingxin Coal Mine beneath the Xitian river, China. An integrated system of GIS-based on a stochastic model, which has been developed for the prediction of dynamic subsidence coupling the time function and probabilistic integral method, is verified through practice at the Lingxin Coal Mine. This development has greatly expanded the ability of the mine operator to characterize previously inaccessible areas of the mine, providing a reliable basis for safe mining and prevention of induced-hazards to ensure high production mining underneath the river bed. (author)

  2. Realizatinon of “zero emission” of mining water effluents from Sasa mine

    OpenAIRE

    Mirakovski, Dejan; Doneva, Nikolinka; Hadzi-Nikolova, Marija; Gocevski, Borce

    2015-01-01

    Sasa mine continuously takes actions to minimize the environmental impact of mining activities, in order to fulfill the national legislation in the field of environmental protection which comply with European legislation. This paper shows the drainage system of the horizon 830, which is performed in order to prevent free leakage of mining groundwater, as a part of these actions. This system provides a zero emission of mining water in the environment from Sasa mine. Key words: mining water...

  3. Booster fans : some considerations for their usage in underground coal mines

    Energy Technology Data Exchange (ETDEWEB)

    Gillies, S.; Slaughter, C. [Missouri Univ. of Science and Technology, Rolla, MO (United States); Calizaya, F. [Utah Univ., Salt Lake City, UT (United States); Wu, H.W. [Gillies Wu Mining Technology Pty Ltd., Brisbane, QLD (Australia)

    2010-07-01

    This paper reported on a study that investigated the conditions under which booster fans can be used safely and efficiently in underground coal mines. Booster fans are installed in series with a main surface fan and are used to boost the air pressure of the ventilation air passing through it. Several coal mining countries use booster fans, but in the United States, they are only used in metal/non-metal mines due to concerns of uncontrolled recirculation. This study investigated installations of booster fans in non-US underground coal mines where safe and efficient atmospheric conditions are achieved. The purpose was to collect reliable information on airway resistances and flow requirements typical in large US coal mines. The study showed that safe booster fan installations are found in both high and low gas conditions, and sometimes where workings are located at great depths. The interlocking systems within the booster fan can control the underground fans and avoid recirculation when surface fans are unexpectedly turned off. Another purpose of the study was to determine when booster fans become a more viable solution in coal mines due to increases in air requirements at higher production rates. It was concluded that a new fan selection algorithm to produce recirculation-free ventilation designs will be developed to enable US coal mine operators to develop ventilation designs to extract coal seams from depths greater than 1000 m. 17 refs., 1 fig.

  4. Proceedings of the 18. international symposium on mine planning and equipment selection (MPES 2009) and the 11. international symposium on environmental issues and waste management in energy and mineral production (SWEMP 2009) : mine planning and equipment selection and environmental issues and waste management in energy and mineral production

    International Nuclear Information System (INIS)

    Singhal, R.K.; Mehrotra, A.; Fytas, K.; Ge, H.

    2009-01-01

    This conference focused on the application of innovative technologies to the mineral industries and the development of productive methods for the mining and processing industries. It was attended by participants from North and South America, Europe, Australia, Africa and Asia with backgrounds in computer sciences, mining engineering and research in mineral production. The major topics addressed regarding mine planning and equipment selection included economic and technical feasibility studies; reserve estimation; mine development; design and planning of surface and underground mines; drilling, blasting, tunneling and excavation engineering; mining equipment selection; automation and information technology; maintenance and production management for mines and mining systems; mining in terms of health, safety and the environment; and rock mechanics and geotechnical applications. The topics addressed regarding waste management in energy and mineral production included the environmental impacts of coal-fired power projects; mining and reclamation; water management; social aspects of rehabilitation; sustainable development for mineral and energy industries; remediation of contaminated soil and groundwater; health hazard and safety issues in small-scale mining; environmental issues in surface and underground mining of metalliferous, coal, uranium and industrial minerals; occupational health and safety; control of effluents from mineral processing, metallurgy and chemical plants; emerging technologies for environmental protection; reliability of waste containment structures; and tailings treatment, recycling and disposal. The conference featured 162 presentations, of which 30 have been catalogued separately for inclusion in this database. refs., tabs., figs.

  5. Mine tailings disposal

    International Nuclear Information System (INIS)

    Gonzales, P.A.; Adams, B.J.

    1980-06-01

    The hydrologic evaluation of mine tailings disposal sites after they are abandoned is considered in relation to their potential environmental impact on a long term basis. There is a direct relation between the amounts and types of water leaving a disposal site and the severity of the potential damage to the environment. The evaluation of the relative distribution of the precipitation reaching the ground into evaporation, runoff and infiltration is obtained for a selected site and type of tailings material whose characteristics and physical properties were determined in the soils laboratory. A conceptual model of the hydrologic processes involved and the corresponding mathematical model were developed to simulate the physical system. A computer program was written to solve the set of equations forming the mathematical model, considering the physical properties of the tailings and the rainfall data selected. The results indicate that the relative distribution of the precipitation depends on the surface and upper layer of the tailings and that the position of the groundwater table is governed by the flow through the bottom of the profile considered. The slope of the surface of the mass of tailings was found to be one of the principal factors affecting the relative distribution of precipitation and, therefore, the potential pollution of the environment

  6. Opencast mining - financial management

    Energy Technology Data Exchange (ETDEWEB)

    Cotgrove, P.G.

    Over the past two years, 28 contracts to work opencast sites in Great Britain have been placed, valued in total at over 400m pounds. The value of individual contracts ranges up to 290m pounds. Opencast's contribution to the coal industry is highly significant, not simply in that over the past ten years it has generated operating profits in excess of 1.7 billion pounds and cash of over 1.5 billion pounds, but in the fact that it complements the deep mining leg of the British Coal Corporation in many ways. The quality and handleability of opencast coals has sweetened blends and thus retained markets and improved realisations, discarded fines and slurries which would otherwise be unsaleable have been imported to opencast plants and blended in with a better product. Derelict colliery sites have been cleared, worked, reclaimed and made available for agriculture or leisure, and perhaps most important of all, the excavation of shallow seams which would be inaccessible from underground is helping to preserve deeper reserves until scarcity increases energy prices to the point where they will become a viable, indeed attractive, investment. 4 tabs.

  7. Mathematical reliability an expository perspective

    CERN Document Server

    Mazzuchi, Thomas; Singpurwalla, Nozer

    2004-01-01

    In this volume consideration was given to more advanced theoretical approaches and novel applications of reliability to ensure that topics having a futuristic impact were specifically included. Topics like finance, forensics, information, and orthopedics, as well as the more traditional reliability topics were purposefully undertaken to make this collection different from the existing books in reliability. The entries have been categorized into seven parts, each emphasizing a theme that seems poised for the future development of reliability as an academic discipline with relevance. The seven parts are networks and systems; recurrent events; information and design; failure rate function and burn-in; software reliability and random environments; reliability in composites and orthopedics, and reliability in finance and forensics. Embedded within the above are some of the other currently active topics such as causality, cascading, exchangeability, expert testimony, hierarchical modeling, optimization and survival...

  8. Data Mining Mining Data: MSHA Enforcement Efforts, Underground Coal Mine Safety, and New Health Policy Implications

    OpenAIRE

    Thomas J. Kniesner; John D. Leeth

    2003-01-01

    Studies of industrial safety regulations, Occupational Safety and Health Administration (OSHA) in particular, often find little effect on worker safety. Critics of the regulatory approach argue that safety standards have little to do with industrial injuries and defenders of the regulatory approach cite infrequent inspections and low fines for violating safety standards. We use recently assembled data from the Mine Safety and Health Administration (MSHA) concerning underground coal mine produ...

  9. Data Mining Mining Data: MSHA Enforcement Efforts, Underground Coal Mine Safety, and New Health Implications

    OpenAIRE

    Kniesner, Thomas J.; Leeth, John D.

    2003-01-01

    Studies of industrial safety regulations, OSHA in particular, often find little effect on worker safety. Critics of the regulatory approach argue that safety standards have little to do with industrial injuries, and defenders of the regulatory approach cite infrequent inspections and low penalties for violating safety standards. We use recently assembled data from the Mine Safety and Health Administration (MSHA) concerning underground coal mine production, safety regulatory activities, and wo...

  10. Mine-hoist active fault tolerant control system and strategy

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Z.; Wang, Y.; Meng, J.; Zhao, P.; Chang, Y. [China University of Mining and Technology, Xuzhou (China)] wzjsdstu@163.com

    2005-06-01

    Based on fault diagnosis and fault tolerant technologies, the mine-hoist active fault-tolerant control system (MAFCS) is presented with corresponding strategies, which includes the fault diagnosis module (FDM), the dynamic library (DL) and the fault-tolerant control model (FCM). When a fault is judged from some sensor by the FDM, FCM reconfigures the state of the MAFCS by calling the parameters from all sub libraries in DL, in order to ensure the reliability and safety of the mine hoist. The simulating result shows that MAFCS is of certain intelligence, which can adopt the corresponding control strategies according to different fault modes, even when there is quite a difference between the real data and the prior fault modes. 7 refs., 5 figs., 1 tab.

  11. Current trends in development of explosives in world mining

    Energy Technology Data Exchange (ETDEWEB)

    Dobnikar, S.

    1987-01-01

    Surveys development of manufacturing industrial explosives in the 19th and 20th centuries, from first use of black powder, ammonium nitrate and TNT to the use of ANFO, slurries and water gel type explosives. Achievements of explosive producers with worldwide reputation (Ireco Chemicals, Du Pont, Atlas Powder Chemical, Nitro Nobel, Nippon Oil and Fats Co., Thermex Energy Co.) for manufacturing safe, reliable explosives used in surface and underground coal and ore mining (including gassy coal mines) and for quarrying are mentioned. Main characteristics of IREMITE, IREGEL, TOVEX, POURVEX, DRIVEX, Detagel, ANFO (both gel- and emulsion-type), Emulgite and Emulite are presented. A critical opinion about future trends in industrial explosive development is given. 10 refs., 7 tabs.

  12. Construct mine environment monitoring system based on wireless mesh network

    Science.gov (United States)

    Chen, Xin; Ge, Gengyu; Liu, Yinmei; Cheng, Aimin; Wu, Jun; Fu, Jun

    2018-04-01

    The system uses wireless Mesh network as a network transmission medium, and strive to establish an effective and reliable underground environment monitoring system. The system combines wireless network technology and embedded technology to monitor the internal data collected in the mine and send it to the processing center for analysis and environmental assessment. The system can be divided into two parts: the main control network module and the data acquisition terminal, and the SPI bus technology is used for mutual communication between them. Multi-channel acquisition and control interface design Data acquisition and control terminal in the analog signal acquisition module, digital signal acquisition module, and digital signal output module. The main control network module running Linux operating system, in which the transplant SPI driver, USB card driver and AODV routing protocol. As a result, the internal data collection and reporting of the mine are realized.

  13. Area dosimetry in the Praid-salt mine.

    Science.gov (United States)

    Stochioiu, Ana; Sahagia, Maria; Tudor, Ion

    2012-08-01

    The aim of the paper is to present a special application of the Romanian thermoluminescent dosemeters system, based on the use of the LiF:Mg,Cu,P, commercial GR-200A detectors, for the measurement of the ultra-low-level ambient dose equivalent rate values, situated within the interval of 1-100 nSv h(-1). The paper briefly describes the system and presents in detail the experimental procedure, including the corrections to be applied to the experimental values. The final characterisation of a Romanian salt mine, proposed to be used as an underground accelerator laboratory, is given. The comparison with the previous measurement results in the Slanic Prahova former salt mine and with the results obtained using the gamma-ray spectrometry method validates the results reported in this paper. The conclusion is that the system provides reliable results in the measurement of the ultra-low-level radiation background.

  14. Of plants and reliability

    International Nuclear Information System (INIS)

    Schneider Horst

    2009-01-01

    Behind the political statements made about the transformer event at the Kruemmel nuclear power station (KKK) in the summer of 2009 there are fundamental issues of atomic law. Pursuant to Articles 20 and 28 of its Basic Law, Germany is a state in which the rule of law applies. Consequently, the aspects of atomic law associated with the incident merit a closer look, all the more so as the items concerned have been known for many years. Important aspects in the debate about the Kruemmel nuclear power plant are the fact that the transformer is considered part of the nuclear power station under atomic law and thus a ''plant'' subject to surveillance by the nuclear regulatory agencies, on the one hand, and the reliability under atomic law of the operator and the executive personnel responsible, on the other hand. Both ''plant'' and ''reliability'' are terms focusing on nuclear safety. Hence the question to what extent safety was affected in the Kruemmel incident. The classification of the event as 0 = no or only a very slight safety impact on the INES scale (INES = International Nuclear Event Scale) should not be used to put aside the safety issue once and for all. Points of fact and their technical significance must be considered prior to any legal assessment. Legal assessments and regulations are associated with facts and circumstances. Any legal examination is based on the facts as determined and elucidated. Any other procedure would be tantamount to an inadmissible legal advance conviction. Now, what is the position of political statements, i.e. political assessments and political responsibility? If everything is done the correct way, they come at the end, after exploration of the facts and evaluation under applicable law. Sometimes things are handled differently, with consequences which are not very helpful. In the light of the provisions about the rule of law as laid down in the Basic Law, the new federal government should be made to observe the proper sequence of

  15. Analysis of US underground thin seam mining potential. Volume 1. Text. Final technical report, December 1978. [In thin seams

    Energy Technology Data Exchange (ETDEWEB)

    Pimental, R. A; Barell, D.; Fine, R. J.; Douglas, W. J.

    1979-06-01

    An analysis of the potential for US underground thin seam (< 28'') coal mining is undertaken to provide basic information for use in making a decision on further thin seam mining equipment development. The characteristics of the present low seam mines and their mining methods are determined, in order to establish baseline data against which changes in mine characteristics can be monitored as a function of time. A detailed data base of thin seam coal resources is developed through a quantitative and qualitative analysis at the bed, county and state level. By establishing present and future coal demand and relating demand to production and resources, the market for thin seam coal has been identified. No thin seam coal demand of significance is forecast before the year 2000. Current uncertainty as to coal's future does not permit market forecasts beyond the year 2000 with a sufficient level of reliability.

  16. Multinomial-exponential reliability function: a software reliability model

    International Nuclear Information System (INIS)

    Saiz de Bustamante, Amalio; Saiz de Bustamante, Barbara

    2003-01-01

    The multinomial-exponential reliability function (MERF) was developed during a detailed study of the software failure/correction processes. Later on MERF was approximated by a much simpler exponential reliability function (EARF), which keeps most of MERF mathematical properties, so the two functions together makes up a single reliability model. The reliability model MERF/EARF considers the software failure process as a non-homogeneous Poisson process (NHPP), and the repair (correction) process, a multinomial distribution. The model supposes that both processes are statistically independent. The paper discusses the model's theoretical basis, its mathematical properties and its application to software reliability. Nevertheless it is foreseen model applications to inspection and maintenance of physical systems. The paper includes a complete numerical example of the model application to a software reliability analysis

  17. Earth Science Mining Web Services

    Science.gov (United States)

    Pham, Long; Lynnes, Christopher; Hegde, Mahabaleshwa; Graves, Sara; Ramachandran, Rahul; Maskey, Manil; Keiser, Ken

    2008-01-01

    To allow scientists further capabilities in the area of data mining and web services, the Goddard Earth Sciences Data and Information Services Center (GES DISC) and researchers at the University of Alabama in Huntsville (UAH) have developed a system to mine data at the source without the need of network transfers. The system has been constructed by linking together several pre-existing technologies: the Simple Scalable Script-based Science Processor for Measurements (S4PM), a processing engine at he GES DISC; the Algorithm Development and Mining (ADaM) system, a data mining toolkit from UAH that can be configured in a variety of ways to create customized mining processes; ActiveBPEL, a workflow execution engine based on BPEL (Business Process Execution Language); XBaya, a graphical workflow composer; and the EOS Clearinghouse (ECHO). XBaya is used to construct an analysis workflow at UAH using ADam components, which are also installed remotely at the GES DISC, wrapped as Web Services. The S4PM processing engine searches ECHO for data using space-time criteria, staging them to cache, allowing the ActiveBPEL engine to remotely orchestras the processing workflow within S4PM. As mining is completed, the output is placed in an FTP holding area for the end user. The goals are to give users control over the data they want to process, while mining data at the data source using the server's resources rather than transferring the full volume over the internet. These diverse technologies have been infused into a functioning, distributed system with only minor changes to the underlying technologies. The key to the infusion is the loosely coupled, Web-Services based architecture: All of the participating components are accessible (one way or another) through (Simple Object Access Protocol) SOAP-based Web Services.

  18. Quality assurance and reliability

    International Nuclear Information System (INIS)

    Normand, J.; Charon, M.

    1975-01-01

    Concern for obtaining high-quality products which will function properly when required to do so is nothing new - it is one manifestation of a conscientious attitude to work. However, the complexity and cost of equipment and the consequences of even temporary immobilization are such that it has become necessary to make special arrangements for obtaining high-quality products and examining what one has obtained. Each unit within an enterprise must examine its own work or arrange for it to be examined; a unit whose specific task is quality assurance is responsible for overall checking, but does not relieve other units of their responsibility. Quality assurance is a form of mutual assistance within an enterprise, designed to remove the causes of faults as far as possible. It begins very early in a project and continues through the ordering stage, construction, start-up trials and operation. Quality and hence reliability are the direct result of what is done at all stages of a project. They depend on constant attention to detail, for even a minor piece of poor workmanship can, in the case of an essential item of equipment, give rise to serious operational difficulties

  19. Reliability of Oronasal Fistula Classification.

    Science.gov (United States)

    Sitzman, Thomas J; Allori, Alexander C; Matic, Damir B; Beals, Stephen P; Fisher, David M; Samson, Thomas D; Marcus, Jeffrey R; Tse, Raymond W

    2018-01-01

    Objective Oronasal fistula is an important complication of cleft palate repair that is frequently used to evaluate surgical quality, yet reliability of fistula classification has never been examined. The objective of this study was to determine the reliability of oronasal fistula classification both within individual surgeons and between multiple surgeons. Design Using intraoral photographs of children with repaired cleft palate, surgeons rated the location of palatal fistulae using the Pittsburgh Fistula Classification System. Intrarater and interrater reliability scores were calculated for each region of the palate. Participants Eight cleft surgeons rated photographs obtained from 29 children. Results Within individual surgeons reliability for each region of the Pittsburgh classification ranged from moderate to almost perfect (κ = .60-.96). By contrast, reliability between surgeons was lower, ranging from fair to substantial (κ = .23-.70). Between-surgeon reliability was lowest for the junction of the soft and hard palates (κ = .23). Within-surgeon and between-surgeon reliability were almost perfect for the more general classification of fistula in the secondary palate (κ = .95 and κ = .83, respectively). Conclusions This is the first reliability study of fistula classification. We show that the Pittsburgh Fistula Classification System is reliable when used by an individual surgeon, but less reliable when used among multiple surgeons. Comparisons of fistula occurrence among surgeons may be subject to less bias if they use the more general classification of "presence or absence of fistula of the secondary palate" rather than the Pittsburgh Fistula Classification System.

  20. Dependent systems reliability estimation by structural reliability approach

    DEFF Research Database (Denmark)

    Kostandyan, Erik; Sørensen, John Dalsgaard

    2014-01-01

    Estimation of system reliability by classical system reliability methods generally assumes that the components are statistically independent, thus limiting its applicability in many practical situations. A method is proposed for estimation of the system reliability with dependent components, where...... the leading failure mechanism(s) is described by physics of failure model(s). The proposed method is based on structural reliability techniques and accounts for both statistical and failure effect correlations. It is assumed that failure of any component is due to increasing damage (fatigue phenomena...... identification. Application of the proposed method can be found in many real world systems....