A Bypass-Ring Scheme for a Fault Tolerant Multicast

Directory of Open Access Journals (Sweden)

V. Dynda

2003-01-01

Full Text Available We present a fault tolerant scheme for recovery from single or multiple node failures in multi-directional multicast trees. The scheme is based on cyclic structures providing alternative paths to eliminate faulty nodes and reroute the traffic. Our scheme is independent of message source and direction in the tree, provides a basis for on-the-fly repair and can be used as a platform for various strategies for reconnecting tree partitions. It only requires an underlying infrastructure to provide a reliable routing service. Although it is described in the context of a message multicast, the scheme can be used universally in all systems using tree-based overlay networks for communication among components.

Multicast routing for wavelength-routed WDM networks with dynamic membership

Science.gov (United States)

Huang, Nen-Fu; Liu, Te-Lung; Wang, Yao-Tzung; Li, Bo

2000-09-01

Future broadband networks must support integrated services and offer flexible bandwidth usage. In our previous work, we explore the optical link control layer on the top of optical layer that enables the possibility of bandwidth on-demand service directly over wavelength division multiplexed (WDM) networks. Today, more and more applications and services such as video-conferencing software and Virtual LAN service require multicast support over the underlying networks. Currently, it is difficult to provide wavelength multicast over the optical switches without optical/electronic conversions although the conversion takes extra cost. In this paper, based on the proposed wavelength router architecture (equipped with ATM switches to offer O/E and E/O conversions when necessary), a dynamic multicast routing algorithm is proposed to furnish multicast services over WDM networks. The goal is to joint a new group member into the multicast tree so that the cost, including the link cost and the optical/electronic conversion cost, is kept as less as possible. The effectiveness of the proposed wavelength router architecture as well as the dynamic multicast algorithm is evaluated by simulation.

Almost optimal distributed M2M multicasting in wireless mesh networks

DEFF Research Database (Denmark)

Xin, Qin; Manne, Fredrik; Zhang, Yan

2012-01-01

Wireless Mesh Networking (WMN) is an emerging communication paradigm to enable resilient, cost-efficient and reliable services for the future-generation wireless networks. In this paper, we study the problem of multipoint-to- multipoint (M2M) multicasting in a WMN which aims to use the minimum nu...

Merging Network Coding with Feedback Management in Multicast Streaming

DEFF Research Database (Denmark)

Moreira, André; Almeida, Luis; Roetter, Daniel Enrique Lucani

2015-01-01

Reliable multicast over wireless poses interesting challenges arising from the unreliable nature of the wireless medium. Recovering lost packets is particularly challenging in multicast scenarios since different receivers lose different packets. For this reason, simply retransmitting packets does...

A SURVEY ON MULTICAST ROUTING PROTOCOLS FOR PERFORMANCE EVALUATION IN WIRELESS SENSOR NETWORK

Directory of Open Access Journals (Sweden)

A. Suruliandi

2015-03-01

Full Text Available Multicast is a process used to transfer same message to multiple receivers at the same time. This paper presents the simulation and analysis of the performance of six different multicast routing protocols for Wireless Sensor Network (WSN. They are On Demand Multicast Routing Protocol (ODMRP, Protocol for Unified Multicasting through Announcement (PUMA, Multicast Adhoc On demand Distance Vector Protocol (MAODV, Overlay Boruvka-based Adhoc Multicast Protocol (OBAMP, Application Layer Multicast Algorithm (ALMA and enhanced version of ALMA (ALMA-H for WSN. Among them, ODMRP, MAODV and PUMA are reactive protocols while OBAMP, ALMA and ALMA-H are proactive protocols. This paper compares the performance of these protocols with common parameters such as Throughput, Reliability, End-to-End delay and Packet Delivery Ratio (PDR with increasing the numbers of nodes and increasing the speed of the nodes. The main objective of this work is to select the efficient multicast routing protocol for WSN among six multicast routing protocol based on relative strength and weakness of each protocol. The summary of above six multicast routing protocols is presented with a table of different performance characteristics. Experimental result shows that ODMRP attains higher throughput, reliability and higher packet delivery ratio than other multicast routing protocol, while incurring far less end-to-end delay.

The Impact of Packet Loss Behavior in 802.11g on the Cooperation Gain in Reliable Multicast

DEFF Research Database (Denmark)

Heide, Janus; Vingelmann, Peter; Pedersen, Morten Videbæk

2012-01-01

In group-oriented applications for wireless networks, reliable multicast strategies are important in order to efficiently distribute data, e.g. in Wireless Mesh Networks (WMNs) and Mobile Ad-hoc NETworks (MANETs). To ensure that developed protocols and systems will operate as expected when deploy...

IP over optical multicasting for large-scale video delivery

Science.gov (United States)

Jin, Yaohui; Hu, Weisheng; Sun, Weiqiang; Guo, Wei

2007-11-01

In the IPTV systems, multicasting will play a crucial role in the delivery of high-quality video services, which can significantly improve bandwidth efficiency. However, the scalability and the signal quality of current IPTV can barely compete with the existing broadcast digital TV systems since it is difficult to implement large-scale multicasting with end-to-end guaranteed quality of service (QoS) in packet-switched IP network. China 3TNet project aimed to build a high performance broadband trial network to support large-scale concurrent streaming media and interactive multimedia services. The innovative idea of 3TNet is that an automatic switched optical networks (ASON) with the capability of dynamic point-to-multipoint (P2MP) connections replaces the conventional IP multicasting network in the transport core, while the edge remains an IP multicasting network. In this paper, we will introduce the network architecture and discuss challenges in such IP over Optical multicasting for video delivery.

Security Enhancement for Multicast over Internet of Things by Dynamically Constructed Fountain Codes

Directory of Open Access Journals (Sweden)

Qinghe Du

2018-01-01

Full Text Available The Internet of Things (IoT is expected to accommodate every object which exists in this world or likely to exist in the near future. The enormous scale of the objects is challenged by big security concerns, especially for common information dissemination via multicast services, where the reliability assurance for multiple multicast users at the cost of increasing redundancy and/or retransmissions also benefits eavesdroppers in successfully decoding the overheard signals. The objective of this work is to address the security challenge present in IoT multicast applications. Specifically, with the presence of the eavesdropper, an adaptive fountain code design is proposed in this paper to enhance the security for multicast in IoT. The main novel features of the proposed scheme include two folds: (i dynamical encoding scheme which can effectively decrease intercept probability at the eavesdropper; (ii increasing the transmission efficiency compared with the conventional nondynamical design. The analysis and simulation results show that the proposed scheme can effectively enhance information security while achieving higher transmission efficiency with a little accredited complexity, thus facilitating the secured wireless multicast transmissions over IoT.

Design of controllable multicast for IPTV over EPON

Science.gov (United States)

Zhang, Chuanhao; Liu, Deming; Zhang, Li; Wu, Guangsheng

2007-11-01

The character of 1Gbps bandwidth and tree-based structure make EPON very suitable for broadcast or multicast services such as IPTV. In this paper we focus on security mechanisms that should be available to groups that specifically request it, and therefore are willing to pay the extra cost of implementing those mechanisms. We concentrate on two issues: how unauthorized multicast traffic can be prevented by means of multicast transit traffic control; how a group's susceptibility is likely to be reduced by means of multicast group access control. We have proposed a novel scheme that should be available to multicast groups that desire precautionary measures be taken to avert the threats of Invalid source and unauthorized access.

IPTV multicast with peer-assisted lossy error control

Science.gov (United States)

Li, Zhi; Zhu, Xiaoqing; Begen, Ali C.; Girod, Bernd

2010-07-01

Emerging IPTV technology uses source-specific IP multicast to deliver television programs to end-users. To provide reliable IPTV services over the error-prone DSL access networks, a combination of multicast forward error correction (FEC) and unicast retransmissions is employed to mitigate the impulse noises in DSL links. In existing systems, the retransmission function is provided by the Retransmission Servers sitting at the edge of the core network. In this work, we propose an alternative distributed solution where the burden of packet loss repair is partially shifted to the peer IP set-top boxes. Through Peer-Assisted Repair (PAR) protocol, we demonstrate how the packet repairs can be delivered in a timely, reliable and decentralized manner using the combination of server-peer coordination and redundancy of repairs. We also show that this distributed protocol can be seamlessly integrated with an application-layer source-aware error protection mechanism called forward and retransmitted Systematic Lossy Error Protection (SLEP/SLEPr). Simulations show that this joint PARSLEP/ SLEPr framework not only effectively mitigates the bottleneck experienced by the Retransmission Servers, thus greatly enhancing the scalability of the system, but also efficiently improves the resistance to the impulse noise.

Experimental characterization of a new multicasting node architecture based on space splitters and wavelength converters

Science.gov (United States)

He, Hao; Su, Yikai; Hu, Peigang; Hu, Weisheng

2005-11-01

IPTV-based broadband services such as interactive multimedia and video conferencing are considered as promising revenue-adding services, and multicast is proven to be a good supplier to support these applications for its reduced consumption of network bandwidth. Generally there are two approaches to implement optical layer multicast. One is space-domain multicast using space-splitter which is low cost but has wavelength continuity constraint, the other is frequency-domain multicast using wavelength converter which resolves the wavelength continuity but with high costs. A new multicasting node which adopts both space-domain multicast and frequency-domain multicast is recently discussed. In this paper we present an experimental demonstration of the new multicasting node architecture based on space splitters and wavelength converters, measurements to characterize such a node are provided.

Cross-Layer Optimal Rate Allocation for Heterogeneous Wireless Multicast

Directory of Open Access Journals (Sweden)

Amr Mohamed

2009-01-01

Full Text Available Heterogeneous multicast is an efficient communication scheme especially for multimedia applications running over multihop networks. The term heterogeneous refers to the phenomenon when multicast receivers in the same session require service at different rates commensurate with their capabilities. In this paper, we address the problem of resource allocation for a set of heterogeneous multicast sessions over multihop wireless networks. We propose an iterative algorithm that achieves the optimal rates for a set of heterogeneous multicast sessions such that the aggregate utility for all sessions is maximized. We present the formulation of the multicast resource allocation problem as a nonlinear optimization model and highlight the cross-layer framework that can solve this problem in a distributed ad hoc network environment with asynchronous computations. Our simulations show that the algorithm achieves optimal resource utilization, guarantees fairness among multicast sessions, provides flexibility in allocating rates over different parts of the multicast sessions, and adapts to changing conditions such as dynamic channel capacity and node mobility. Our results show that the proposed algorithm not only provides flexibility in allocating resources across multicast sessions, but also increases the aggregate system utility and improves the overall system throughput by almost 30% compared to homogeneous multicast.

Secure Multicast Routing Algorithm for Wireless Mesh Networks

Directory of Open Access Journals (Sweden)

Rakesh Matam

2016-01-01

Full Text Available Multicast is an indispensable communication technique in wireless mesh network (WMN. Many applications in WMN including multicast TV, audio and video conferencing, and multiplayer social gaming use multicast transmission. On the other hand, security in multicast transmissions is crucial, without which the network services are significantly disrupted. Existing secure routing protocols that address different active attacks are still vulnerable due to subtle nature of flaws in protocol design. Moreover, existing secure routing protocols assume that adversarial nodes cannot share an out-of-band communication channel which rules out the possibility of wormhole attack. In this paper, we propose SEMRAW (SEcure Multicast Routing Algorithm for Wireless mesh network that is resistant against all known active threats including wormhole attack. SEMRAW employs digital signatures to prevent a malicious node from gaining illegitimate access to the message contents. Security of SEMRAW is evaluated using the simulation paradigm approach.

Dynamic multicast routing scheme in WDM optical network

Science.gov (United States)

Zhu, Yonghua; Dong, Zhiling; Yao, Hong; Yang, Jianyong; Liu, Yibin

2007-11-01

During the information era, the Internet and the service of World Wide Web develop rapidly. Therefore, the wider and wider bandwidth is required with the lower and lower cost. The demand of operation turns out to be diversified. Data, images, videos and other special transmission demands share the challenge and opportunity with the service providers. Simultaneously, the electrical equipment has approached their limit. So the optical communication based on the wavelength division multiplexing (WDM) and the optical cross-connects (OXCs) shows great potentials and brilliant future to build an optical network based on the unique technical advantage and multi-wavelength characteristic. In this paper, we propose a multi-layered graph model with inter-path between layers to solve the problem of multicast routing wavelength assignment (RWA) contemporarily by employing an efficient graph theoretic formulation. And at the same time, an efficient dynamic multicast algorithm named Distributed Message Copying Multicast (DMCM) mechanism is also proposed. The multicast tree with minimum hops can be constructed dynamically according to this proposed scheme.

An Efficient SDN Multicast Architecture for Dynamic Industrial IoT Environments

Directory of Open Access Journals (Sweden)

Hyeong-Su Kim

2018-01-01

Full Text Available Large-scale industrial IoT services appear in smart factory domains such as factory clouds which integrate distributed small factories into a large virtual factory with dynamic combination based on orders of consumers. A smart factory has so many industrial elements including various sensors/actuators, gateways, controllers, application servers, and IoT clouds. Since there are complex connections and relations, it is hard to handle them in point-to-point manner. In addition, many duplicated traffics are exchanged between them through the Internet. Multicast is believed as an effective many-to-many communication mechanism by establishing multicast trees between sources and receivers. There are, however, some issues for adopting multicast to large-scale industrial IoT services in terms of QoS. In this paper, we propose a novel software-defined network multicast based on group shared tree which includes near-receiver rendezvous point selection algorithm and group shared tree switching mechanism. As a result, the proposed multicast mechanism can reduce the packet loss by 90% compared to the legacy methods under severe congestion condition. GST switching method obtains to decreased packet delay effect, respectively, 2%, 20% better than the previously studied multicast and the legacy SDN multicast.

A Low-Complexity Subgroup Formation with QoS-Aware for Enhancing Multicast Services in LTE Networks

Science.gov (United States)

Algharem, M.; Omar, M. H.; Rahmat, R. F.; Budiarto, R.

2018-03-01

The high demand of Multimedia services on in Long Term Evolution (LTE) and beyond networks forces the networks operators to find a solution that can handle the huge traffic. Along with this, subgroup formation techniques are introduced to overcome the limitations of the Conventional Multicast Scheme (CMS) by splitting the multicast users into several subgroups based on the users’ channels quality signal. However, finding the best subgroup configuration with low complexity is need more investigations. In this paper, an efficient and simple subgroup formation mechanisms are proposed. The proposed mechanisms take the transmitter MAC queue in account. The effectiveness of the proposed mechanisms is evaluated and compared with CMS in terms of throughput, fairness, delay, Block Error Rate (BLER).

Performance Evaluation of Multicast Video Distribution using LTE-A in Vehicular Environments

OpenAIRE

Thota, Jayashree; Bulut, Berna; Doufexi, Angela; Armour, Simon; Nix, Andrew

2017-01-01

Application Layer Forward Error Correction (AL-FEC) based on Raptor codes has been employed in Multimedia Broadcast/Multicast Services (MBMS) to improve reliability. This paper considers a cross-layer system based on the latest Raptor Q codes for transmitting high data rate video. Multiple Input Multiple Output (MIMO) channels in a realistic outdoor environment for a user moving at 50kmph in an LTE-A system is considered. A link adaptation model with optimized cross-layer parameters is propos...

Transmission techniques for emergent multicast and broadcast systems

CERN Document Server

da Silva, Mario Marques; Dinis, Rui; Souto, Nuno; Silva, Joao Carlos

2010-01-01

Describing efficient transmission schemes for broadband wireless systems, Transmission Techniques for Emergent Multicast and Broadcast Systems examines advances in transmission techniques and receiver designs capable of supporting the emergent wireless needs for multimedia broadcast and multicast service (MBMS) requirements. It summarizes the research and development taking place in wireless communications for multimedia MBMS and addresses the means to improved spectral efficiency to allow for increased user bit rate, as well as increased capacity of the digital cellular radio network.The text

Near-field self-interference cancellation and quality of service multicast beamforming in full-duplex

Science.gov (United States)

Wu, Fei; Shao, Shihai; Tang, Youxi

2016-10-01

To enable simultaneous multicast downlink transmit and receive operations on the same frequency band, also known as full-duplex links between an access point and mobile users. The problem of minimizing the total power of multicast transmit beamforming is considered from the viewpoint of ensuring the suppression amount of near-field line-of-sight self-interference and guaranteeing prescribed minimum signal-to-interference-plus-noise-ratio (SINR) at each receiver of the multicast groups. Based on earlier results for multicast groups beamforming, the joint problem is easily shown to be NP-hard. A semidefinite relaxation (SDR) technique with linear program power adjust method is proposed to solve the NP-hard problem. Simulation shows that the proposed method is feasible even when the local receive antenna in nearfield and the mobile user in far-filed are in the same direction.

Using IGMP V3 for controllable multicast over EPON

Science.gov (United States)

Zhang, Chuanhao; Liu, Deming; Zhang, Li; Wu, Guangsheng

2008-11-01

The character of 1Gbps bandwidth and tree-based structure make EPON very suitable for broadcast or multicast services such as IPTV. The document proposed a novel scheme, based on the former research for controllable multicast over EPON system, mainly considering system security and maintainability. It can both control the IPTV program source's and the receiver's validity, improving the efficiency and precision. The processing of the two configurations mode is given in detail.

Protection switching for carrier ethernet multicast

DEFF Research Database (Denmark)

Ruepp, Sarah Renée; Wessing, Henrik; Berger, Michael Stübert

2010-01-01

This paper addresses network survivability for IPTV multicast transport in Carrier Ethernet networks. The impact of link failures is investigated and suggestions for intelligent multicast resilience schemes are proposed. In particular, functions of the multicast tree are integrated with the Carri...... recovery path length, recovery time, number of branch nodes and operational complexity. The integrated approach therefore shows significant potential to increase the QoE for IPTV users in case of network failures and recovery actions.......This paper addresses network survivability for IPTV multicast transport in Carrier Ethernet networks. The impact of link failures is investigated and suggestions for intelligent multicast resilience schemes are proposed. In particular, functions of the multicast tree are integrated with the Carrier...

Demonstration of flexible multicasting and aggregation functionality for TWDM-PON

Science.gov (United States)

Chen, Yuanxiang; Li, Juhao; Zhu, Paikun; Zhu, Jinglong; Tian, Yu; Wu, Zhongying; Peng, Huangfa; Xu, Yongchi; Chen, Jingbiao; He, Yongqi; Chen, Zhangyuan

2017-06-01

The time- and wavelength-division multiplexed passive optical network (TWDM-PON) has been recognized as an attractive solution to provide broadband access for the next-generation networks. In this paper, we propose flexible service multicasting and aggregation functionality for TWDM-PON utilizing multiple-pump four-wave-mixing (FWM) and cyclic arrayed waveguide grating (AWG). With the proposed scheme, multiple TWDM-PON links share a single optical line terminal (OLT), which can greatly reduce the network deployment expense and achieve efficient network resource utilization by load balancing among different optical distribution networks (ODNs). The proposed scheme is compatible with existing TDM-PON infrastructure with fixed-wavelength OLT transmitter, thus smooth service upgrade can be achieved. Utilizing the proposed scheme, we demonstrate a proof-of-concept experiment with 10-Gb/s OOK and 10-Gb/s QPSK orthogonal frequency division multiplexing (OFDM) signal multicasting and aggregating to seven PON links. Compared with back-to-back (BTB) channel, the newly generated multicasting OOK signal and OFDM signal have power penalty of 1.6 dB and 2 dB at the BER of 10-3, respectively. For the aggregation of multiple channels, no obvious power penalty is observed. What is more, to verify the flexibility of the proposed scheme, we reconfigure the wavelength selective switch (WSS) and adjust the number of pumps to realize flexible multicasting functionality. One to three, one to seven, one to thirteen and one to twenty-one multicasting are achieved without modifying OLT structure.

Authenticated IGMP for Controlling Access to Multicast Distribution Tree

Science.gov (United States)

Park, Chang-Seop; Kang, Hyun-Sun

A receiver access control scheme is proposed to protect the multicast distribution tree from DoS attack induced by unauthorized use of IGMP, by extending the security-related functionality of IGMP. Based on a specific network and business model adopted for commercial deployment of IP multicast applications, a key management scheme is also presented for bootstrapping the proposed access control as well as accounting and billing for CP (Content Provider), NSP (Network Service Provider), and group members.

Efficiency Intra-Cluster Device-to-Device Relay Selection for Multicast Services Based on Combinatorial Auction

Directory of Open Access Journals (Sweden)

Yong Zhang

2015-12-01

Full Text Available In Long Term Evolution-Advanced (LTE-A networks, Device-to-device (D2D communications can be utilized to enhance the performance of multicast services by leveraging D2D relays to serve nodes with worse channel conditions within a cluster. For traditional D2D relay schemes, D2D links with poor channel condition may be the bottleneck of system sum data rate. In this paper, to optimize the throughput of D2D communications, we introduce an iterative combinatorial auction algorithm for efficient D2D relay selection. In combinatorial auctions, the User Equipments (UEs that fails to correctly receive multicast data from eNodeB (eNB are viewed as bidders that compete for D2D relays, while the eNB is treated as the auctioneer. We also give properties of convergency and low-complexity and present numerical simulations to verify the efficiency of the proposed algorithm.

An efficient mechanism for dynamic survivable multicast traffic grooming

Science.gov (United States)

Yu, Xiaojun; Xiao, Gaoxi; Cheng, Tee Hiang

2015-06-01

Recent advances in wavelength division multiplexing (WDM) networks have helped enhance the popularity of multicasting services. However, as a single network failure may disrupt the information transmission to multiple end-users, protecting multicast requests against network failures becomes an important issue in network operation. This paper investigates the sub-wavelength level protection for dynamic multicast traffic grooming. A new method named lightpath-fragmentation based segment shared protection (LF-SSP) scheme is proposed. By carefully splitting primary/backup lightpaths into segments to improve resource sharing for both traffic grooming and protection, LF-SSP aims to minimize the network resources allocated for request protection. Extensive simulations are carried out to compare the performance of LF-SSP to some existing approaches, on sub-wavelength-level as well as wavelength-level multicast protections in different cases. Results show that LF-SSP steadily outperforms these existing methods as long as the network resources are not too limited. Influences of the add/drop port resources and the average number of destinations per connection request on the LF-SSP performance are also evaluated.

Multicast Services of QoS-Aware Active Queue Management over IP Multimedia Applications

Science.gov (United States)

Hwang, I.-Shyan; Hwang, Bor-Jiunn; Chang, Pen-Ming

2010-10-01

Recently, the multimedia services such as IPTV, video conference emerges to be the main traffic source. When UDP coexists with TCP, it induces not only congestion collapse but also unfairness problem. In this paper, a new Active Queue Management (AQM) algorithm, called Traffic Sensitive Active Queue Management (TSAQM), is proposed for providing multimedia services. The TSAQM comprise Dynamic Weight Allocate Scheme (DWAS) and Service Guarantee Scheme (SGS), the purpose of DWAS is to allocate resource with fairness and high end-user utility, and the purpose of SGS is to determine the satisfactory threshold (TH) and threshold region (TR). Several objectives of this proposed scheme include achieving high end-user utility for video service, considering the multicast as well as unicast proprieties to meet inter-class fairness and achieving the QoS requirement by adjusting the thresholds adaptively based on traffic situations.

Alcatel-Lucent Service Routing Architect (SRA) self-study guide preparing for the BGP, VPRN and Multicast exams

CERN Document Server

Warnock, Glenn; Shaheen, Ghassan

2015-01-01

A comprehensive resource for professionals preparing for Alcatel-Lucent Service Routing Architect (SRA) certification Networking professionals are taking note of Alcatel-Lucent and its quick ascent in the networking and telecom industries. IP networking professionals looking for a comprehensive guide to obtaining the Alcatel-Lucent Service Routing Architect (SRA) certification will be pleased to learn of this new publication, Alcatel-Lucent Service Routing Architect (SRA) Self-Study Guide: Preparing for the BGP, VPRN and Multicast Exams. The book comprises approximately 2,600 pages of print a

High Performance Computing Multicast

Science.gov (United States)

2012-02-01

A History of the Virtual Synchrony Replication Model,” in Replication: Theory and Practice, Charron-Bost, B., Pedone, F., and Schiper, A. (Eds...Performance Computing IP / IPv4 Internet Protocol (version 4.0) IPMC Internet Protocol MultiCast LAN Local Area Network MCMD Dr. Multicast MPI

History-based Adaptive Modulation for a Downlink Multicast Channel in OFDMA systems

DEFF Research Database (Denmark)

Wang, Haibo; Schwefel, Hans-Peter; Toftegaard, Thomas Skjødeberg

2008-01-01

In this paper we investigated the adaptive modulation strategies for Multicast service in orthogonal frequency division multiple access systems. We defined a Reward function as the performance optimization target and developed adaptive modulation strategies to maximize this Reward function....... The proposed optimization algorithm varied the instantaneous BER constraint of each mobile Multicast receiver according to its individual cumulated BER, which resulted in a significant Reward gain....

Admission and Preventive Load Control for Delivery of Multicast and Broadcast Services via S-UMTS

Science.gov (United States)

Angelou, E.; Koutsokeras, N.; Andrikopoulos, I.; Mertzanis, I.; Karaliopoulos, M.; Henrio, P.

2003-07-01

An Admission Control strategy is proposed for unidirectional satellite systems delivering multicast and broadcast services to mobile users. In such systems, both the radio interface and the targeted services impose particular requirements on the RRM task. We briefly discuss the RRM requirements that stem from the services point of view and from the features of the SATIN access scheme that differentiate it from the conventional T-UMTS radio interface. The main functional entities of RRM and the alternative modes of operation are outlined and the proposed Admission Control algorithm is described in detail. The results from the simulation study that demonstrate its performance for a number of different scenarios are finally presented and conclusions derived.

Empirical Evaluation of Superposition Coded Multicasting for Scalable Video

KAUST Repository

Chun Pong Lau; Shihada, Basem; Pin-Han Ho

2013-01-01

In this paper we investigate cross-layer superposition coded multicast (SCM). Previous studies have proven its effectiveness in exploiting better channel capacity and service granularities via both analytical and simulation approaches. However

Optical multicast system for data center networks.

Science.gov (United States)

Samadi, Payman; Gupta, Varun; Xu, Junjie; Wang, Howard; Zussman, Gil; Bergman, Keren

2015-08-24

We present the design and experimental evaluation of an Optical Multicast System for Data Center Networks, a hardware-software system architecture that uniquely integrates passive optical splitters in a hybrid network architecture for faster and simpler delivery of multicast traffic flows. An application-driven control plane manages the integrated optical and electronic switched traffic routing in the data plane layer. The control plane includes a resource allocation algorithm to optimally assign optical splitters to the flows. The hardware architecture is built on a hybrid network with both Electronic Packet Switching (EPS) and Optical Circuit Switching (OCS) networks to aggregate Top-of-Rack switches. The OCS is also the connectivity substrate of splitters to the optical network. The optical multicast system implementation requires only commodity optical components. We built a prototype and developed a simulation environment to evaluate the performance of the system for bulk multicasting. Experimental and numerical results show simultaneous delivery of multicast flows to all receivers with steady throughput. Compared to IP multicast that is the electronic counterpart, optical multicast performs with less protocol complexity and reduced energy consumption. Compared to peer-to-peer multicast methods, it achieves at minimum an order of magnitude higher throughput for flows under 250 MB with significantly less connection overheads. Furthermore, for delivering 20 TB of data containing only 15% multicast flows, it reduces the total delivery energy consumption by 50% and improves latency by 55% compared to a data center with a sole non-blocking EPS network.

WDM Network and Multicasting Protocol Strategies

Directory of Open Access Journals (Sweden)

Pinar Kirci

2014-01-01

Full Text Available Optical technology gains extensive attention and ever increasing improvement because of the huge amount of network traffic caused by the growing number of internet users and their rising demands. However, with wavelength division multiplexing (WDM, it is easier to take the advantage of optical networks and optical burst switching (OBS and to construct WDM networks with low delay rates and better data transparency these technologies are the best choices. Furthermore, multicasting in WDM is an urgent solution for bandwidth-intensive applications. In the paper, a new multicasting protocol with OBS is proposed. The protocol depends on a leaf initiated structure. The network is composed of source, ingress switches, intermediate switches, edge switches, and client nodes. The performance of the protocol is examined with Just Enough Time (JET and Just In Time (JIT reservation protocols. Also, the paper involves most of the recent advances about WDM multicasting in optical networks. WDM multicasting in optical networks is given as three common subtitles: Broadcast and-select networks, wavelength-routed networks, and OBS networks. Also, in the paper, multicast routing protocols are briefly summarized and optical burst switched WDM networks are investigated with the proposed multicast schemes.

Multicast middleware for performance and topology analysis of multimedia grids

Directory of Open Access Journals (Sweden)

Jerry Z. Xie

2017-04-01

Full Text Available Since multicast reduces bandwidth consumption in multimedia grid computing, the middleware for monitoring the performance and topology of multicast communications is important to the design and management of multimedia grid applications. However, the current middleware technologies for multicast performance monitoring are still far from attaining the level of maturity and there lacks consistent approaches to obtain the evaluation data for multicast. In this study, to serve a clear guide for the design and implementation of the multicast middleware, two algorithms are developed for organising all constituents in multicast communications and analysing the multicast performance in two topologies – ‘multicast distribution tree’ and ‘clusters distribution’, and a definitive set of corresponding metrics that are comprehensive yet viable for evaluating multicast communications are also presented. Instead of using the inference data from unicast measurements, in the proposed middleware, the measuring data of multicast traffic are obtained directly from multicast protocols in real time. Moreover, this study makes a middleware implementation which is integrated into a real access grid multicast communication infrastructure. The results of the implementation demonstrate the substantial improvements in the accuracy and real time in evaluating the performance and topology of multicast network.

Linear and non-linear video and TV applications using IPv6 and IPv6 multicast

CERN Document Server

Minoli, Daniel

2012-01-01

Provides options for implementing IPv6 and IPv6 multicast in service provider networks New technologies, viewing paradigms, and content distribution approaches are taking the TV/video services industry by storm. Linear and Nonlinear Video and TV Applications: Using IPv6 and IPv6 Multicast identifies five emerging trends in next-generation delivery of entertainment-quality video. These trends are observable and can be capitalized upon by progressive service providers, telcos, cable operators, and ISPs. This comprehensive guide explores these evolving directions in the TV/v

Optimal multicasting in a multi-line-rate ethernet-over-WDM network

Science.gov (United States)

Harve, Shruthi; Batayneh, Marwan; Mukherjee, Biswanath

2009-11-01

Ethernet is the dominant transport technology for Local Area Networks. Efforts are now under way to use carrier-grade Ethernet in backbone networks of different service providers. With the advent of applications such as IPTV and Videoon- Demand, there is need for techniques to route multicast traffic over the Ethernet backbone networks. Here, we address the problem of Routing and Wavelength Assignment (RWA) of a set of multicast requests in a Multi-Line-Rate Ethernet backbone network with the objective of minimizing the cost of setting up the network, in terms of the Service Provider's Capital Expenditure (CAPEX). We present an Auxiliary Graph based heuristic algorithm that routes each multicast request on a light-tree structure, and assigns minimum cost wavelengths along the route. We compare the properties of the algorithm to the optimal solution given by a mathematical model formulated as an Integer Linear Program (ILP), and show that they compare very well. We also find that the algorithm is most cost-effective when the incoming requests are processed in descending order of their bandwidth requirements.

Empirical Evaluation of Superposition Coded Multicasting for Scalable Video

KAUST Repository

Chun Pong Lau

2013-03-01

In this paper we investigate cross-layer superposition coded multicast (SCM). Previous studies have proven its effectiveness in exploiting better channel capacity and service granularities via both analytical and simulation approaches. However, it has never been practically implemented using a commercial 4G system. This paper demonstrates our prototype in achieving the SCM using a standard 802.16 based testbed for scalable video transmissions. In particular, to implement the superposition coded (SPC) modulation, we take advantage a novel software approach, namely logical SPC (L-SPC), which aims to mimic the physical layer superposition coded modulation. The emulation results show improved throughput comparing with generic multicast method.

Scalable Multicasting over Next-Generation Internet Design, Analysis and Applications

CERN Document Server

Tian, Xiaohua

2013-01-01

Next-generation Internet providers face high expectations, as contemporary users worldwide expect high-quality multimedia functionality in a landscape of ever-expanding network applications. This volume explores the critical research issue of turning today’s greatly enhanced hardware capacity to good use in designing a scalable multicast  protocol for supporting large-scale multimedia services. Linking new hardware to improved performance in the Internet’s next incarnation is a research hot-spot in the computer communications field.   The methodical presentation deals with the key questions in turn: from the mechanics of multicast protocols to current state-of-the-art designs, and from methods of theoretical analysis of these protocols to applying them in the ns2 network simulator, known for being hard to extend. The authors’ years of research in the field inform this thorough treatment, which covers details such as applying AOM (application-oriented multicast) protocol to IPTV provision and resolving...

Multicast traffic grooming in flexible optical WDM networks

Science.gov (United States)

Patel, Ankitkumar N.; Ji, Philip N.; Jue, Jason P.; Wang, Ting

2012-12-01

In Metropolitan Area Networks (MANs), point-to-multipoint applications, such as IPTV, video-on-demand, distance learning, and content distribution, can be efficiently supported through light-tree-based multicastcommunications instead of lightpath-based unicast-communications. The application of multicasting for such traffic is justified by its inherent benefits of reduced control and management overhead and elimination of redundant resource provisioning. Supporting such multicast traffic in Flexible optical WDM (FWDM) networks that can provision light-trees using optimum amount of spectrum within flexible channel spacing leads to higher wavelength and spectral efficiencies compared to the conventional ITU-T fixed grid networks. However, in spite of such flexibility, the residual channel capacity of stranded channels may not be utilized if the network does not offer channels with arbitrary line rates. Additionally, the spectrum allocated to guard bands used to isolate finer granularity channels remains unutilized. These limitations can be addressed by using traffic grooming in which low-rate multicast connections are aggregated and switched over high capacity light-trees. In this paper, we address the multicast traffic grooming problem in FWDM networks, and propose a novel auxiliary graph-based algorithm for the first time. The performance of multicast traffic grooming is evaluated in terms of spectral, cost, and energy efficiencies compared to lightpath-based transparent FWDM networks, lightpathbased traffic grooming-capable FWDM networks, multicast-enabled transparent FWDM networks, and multicast traffic grooming-capable fixed grid networks. Simulation results demonstrate that multicast traffic grooming in FWDM networks not only improves spectral efficiency, but also cost, and energy efficiencies compared to other multicast traffic provisioning approaches of FWDM and fixed grid networks.

Multi-area layered multicast scheme for MPLS networks

Science.gov (United States)

Ma, Yajie; Yang, Zongkai; Wang, Yuming; Chen, Jingwen

2005-02-01

Multi-protocol label switching (MPLS) is multiprotocols both at layer 2 and layer 3. It is suggested to overcome the shortcomings of performing complex longest prefix matching in layer 3 routing by using short, fixed length labels. The MPLS community has put more effort into the label switching of unicast IP traffic, but less in the MPLS multicast mechanism. The reasons are the higher label consumption, the dynamical mapping of L3 multicast tree to L2 LSPs and the 20-bit shim header which is much fewer than the IPv4 IP header. On the other hand, heterogeneity of node capability degrades total performance of a multicast group. In order to achieve the scalability as well as the heterogeneity in MPLS networks, a novel scheme of MPLS-based Multi-area Layered Multicast Scheme (MALM) is proposed. Unlike the existing schemes which focus on aggregating the multicast stream, we construct the multicast tree based on the virtual topology aggregation. The MPLS area is divided into different sub-areas to form the hierarchical virtual topology and the multicast group is reconstructed into multiple layers according to the node capability. At the same time, the label stack is used to save the label space. For stability of the MALM protocol, a multi-layer protection scheme is also discussed. The experiment results show that the proposed scheme saves label space and decrease the Multicast Forwarding Table in much degree.

Energy-Efficient Multicast Transmission for Underlay Device-to-Device Communications: A Social-Aware Perspective

Directory of Open Access Journals (Sweden)

Fan Jiang

2017-01-01

Full Text Available In this paper, by utilizing the social relationships among mobile users, we present a framework of energy-efficient cluster formation and resource allocation for multicast D2D transmission. In particular, we first deal with D2D multicast cluster/group formation strategy from both physical distance and social trust level. Then we aim to maximize the overall energy-efficiency of D2D multicast groups through resource allocation and power control scheme, which considers the quality-of-service (QoS requirements of both cellular user equipment and D2D groups. A heuristic algorithm is proposed to solve above energy-efficiency problem with less complexity. After that, considering the limited battery capacity of mobile users, we propose an energy and social aware cluster head update algorithm, which incorporates both the energy constraint and social centrality measurement. Numerical results indicate that the proposed social-tie based D2D multicast group formation and update algorithm form a multicast group in an energy efficient way. Moreover, the proposed resource and power allocation scheme achieves better energy efficiency in terms of throughput per energy consumption. These results show that, by exploiting social domain information, underlay D2D multicast transmission has high practical potential in saving the source on wireless links and in the backhaul.

Exploiting the In-Network Capabilities of Multicast to Discover Proximate IPTV Channels

Directory of Open Access Journals (Sweden)

William Donnelly

2010-09-01

Full Text Available IPTV has become the next generation of television due, in part, to its ability to support features that have been lacking in conventional broadcasting—for example, end-user interactivity, personalisation and localisation. Providers are also searching for the most efficient delivery methods to provide the greatest amount of contents at the lowest cost. At present IPTV uses IP multicast to deliver live TV channels in an over-provisioned walled-garden network due to issues of deploying multicast and QoS challenges in the public Internet. However, IPTV is likely to shift into some parts of the public Internet in the future as a managed service. Multicast routing is performed on a per-session destination-address basis so each router maintains a table of all of the multicast addresses to which the content is being forwarded. We exploit this information to discover and join the in-progress channels of geographically proximate users and to create a new incentivised premium service in future IPTV networks called ProxyTV. This approach is expected to minimise network bandwidth requirements as it enables ISPs to optimise bandwidth on their edge networks. This becomes increasingly significant as TV content consumes more and more bandwidth, especially with the onset of HD and 3D capabilities. In this paper, we have presented in detail the concept with the results of a survey and an analysis of network traffic to justify the proposed approach.

Implementing Resource-aware Multicast Forwarding in Software Defined Networks

DEFF Research Database (Denmark)

Poderys, Justas; Sunny, Anjusha; Soler, José

2018-01-01

Using multicast data transmissions, data can be eciently distributed to a high number of network users. However, in order to ef-ciently stream multimedia using multicast communication, multicast routing protocols must have knowledge of all network links and their available bandwidth. In Software...

A Dynamic Active Multicast Group Access Control Framework Based on Trust Management System

Institute of Scientific and Technical Information of China (English)

YANG Chang; CHEN Xiaolin; ZHANG Huanguo

2006-01-01

The current multicast model provides no access control mechanism. Any host can send data directly to a multicast address or join a multicast group to become a member, which brings safety problems to multicast. In this paper, we present a new active multicast group access control mechanism that is founded on trust management. This structure can solve the problem that exists in multicast members' access control and distributing authorization of traditional IP multicast.

A Secure and Stable Multicast Overlay Network with Load Balancing for Scalable IPTV Services

Directory of Open Access Journals (Sweden)

Tsao-Ta Wei

2012-01-01

Full Text Available The emerging multimedia Internet application IPTV over P2P network preserves significant advantages in scalability. IPTV media content delivered in P2P networks over public Internet still preserves the issues of privacy and intellectual property rights. In this paper, we use SIP protocol to construct a secure application-layer multicast overlay network for IPTV, called SIPTVMON. SIPTVMON can secure all the IPTV media delivery paths against eavesdroppers via elliptic-curve Diffie-Hellman (ECDH key exchange on SIP signaling and AES encryption. Its load-balancing overlay tree is also optimized from peer heterogeneity and churn of peer joining and leaving to minimize both service degradation and latency. The performance results from large-scale simulations and experiments on different optimization criteria demonstrate SIPTVMON's cost effectiveness in quality of privacy protection, stability from user churn, and good perceptual quality of objective PSNR values for scalable IPTV services over Internet.

Mobile Multicast in Hierarchical Proxy Mobile IPV6

Science.gov (United States)

Hafizah Mohd Aman, Azana; Hashim, Aisha Hassan A.; Mustafa, Amin; Abdullah, Khaizuran

2013-12-01

Mobile Internet Protocol Version 6 (MIPv6) environments have been developing very rapidly. Many challenges arise with the fast progress of MIPv6 technologies and its environment. Therefore the importance of improving the existing architecture and operations increases. One of the many challenges which need to be addressed is the need for performance improvement to support mobile multicast. Numerous approaches have been proposed to improve mobile multicast performance. This includes Context Transfer Protocol (CXTP), Hierarchical Mobile IPv6 (HMIPv6), Fast Mobile IPv6 (FMIPv6) and Proxy Mobile IPv6 (PMIPv6). This document describes multicast context transfer in hierarchical proxy mobile IPv6 (H-PMIPv6) to provide better multicasting performance in PMIPv6 domain.

Multicasting based optical inverse multiplexing in elastic optical network.

Science.gov (United States)

Guo, Bingli; Xu, Yingying; Zhu, Paikun; Zhong, Yucheng; Chen, Yuanxiang; Li, Juhao; Chen, Zhangyuan; He, Yongqi

2014-06-16

Optical multicasting based inverse multiplexing (IM) is introduced in spectrum allocation of elastic optical network to resolve the spectrum fragmentation problem, where superchannels could be split and fit into several discrete spectrum blocks in the intermediate node. We experimentally demonstrate it with a 1-to-7 optical superchannel multicasting module and selecting/coupling components. Also, simulation results show that, comparing with several emerging spectrum defragmentation solutions (e.g., spectrum conversion, split spectrum), IM could reduce blocking performance significantly but without adding too much system complexity as split spectrum. On the other hand, service fairness for traffic with different granularity of these schemes is investigated for the first time and it shows that IM performs better than spectrum conversion and almost as well as split spectrum, especially for smaller size traffic under light traffic intensity.

Lossless Multicast Handovers in Proxy Fast Mobile IPv6 Networks

NARCIS (Netherlands)

Meijerink, Berend Jan; Heijenk, Geert

2015-01-01

There is a demand in the Public Protection and Disaster Relief (PPDR) community for high bandwidth services on mobile devices. Group communication is an important aspect of PPDR networks. In IP based networks multicast is the preferred method to efficiently transmit data to more than one receiver

Multicast Performance Analysis for High-Speed Torus Networks

National Research Council Canada - National Science Library

Oral, S; George, A

2002-01-01

... for unicast-based and path-based multicast communication on high-speed torus networks. Software-based multicast performance results of selected algorithms on a 16-node Scalable Coherent Interface (SCI) torus are given...

An Optical Multicast Routing with Minimal Network Coding Operations in WDM Networks

Directory of Open Access Journals (Sweden)

Huanlin Liu

2014-01-01

Full Text Available Network coding can improve the optical multicast routing performance in terms of network throughput, bandwidth utilization, and traffic load balance. But network coding needs high encoding operations costs in all-optical WDM networks due to shortage of optical RAM. In the paper, the network coding operation is defined to evaluate the number of network coding operation cost in the paper. An optical multicast routing algorithm based on minimal number of network coding operations is proposed to improve the multicast capacity. Two heuristic criteria are designed to establish the multicast routing with low network coding cost and high multicast capacity. One is to select one path from the former K shortest paths with the least probability of dropping the multicast maximal capacity. The other is to select the path with lowest potential coding operations with the highest link shared degree among the multiple wavelength disjoint paths cluster from source to each destination. Comparing with the other multicast routing based on network coding, simulation results show that the proposed multicast routing algorithm can effectively reduce the times of network coding operations, can improve the probability of reaching multicast maximal capacity, and can keep the less multicast routing link cost for optical WDM networks.

Reliability of Broadcast Communications Under Sparse Random Linear Network Coding

OpenAIRE

Brown, Suzie; Johnson, Oliver; Tassi, Andrea

2018-01-01

Ultra-reliable Point-to-Multipoint (PtM) communications are expected to become pivotal in networks offering future dependable services for smart cities. In this regard, sparse Random Linear Network Coding (RLNC) techniques have been widely employed to provide an efficient way to improve the reliability of broadcast and multicast data streams. This paper addresses the pressing concern of providing a tight approximation to the probability of a user recovering a data stream protected by this kin...

Implementing Resource-aware Multicast Forwarding in Software Defined Networks

DEFF Research Database (Denmark)

Poderys, Justas; Sunny, Anjusha; Soler, José

2018-01-01

Using multicast data transmissions, data can be eciently distributed to a high number of network users. However, in order to ef-ciently stream multimedia using multicast communication, multicast routing protocols must have knowledge of all network links and their available bandwidth. In Software......-Karp algorithm, by taking into account network topology and links load information. This paper presents the algorithm, implementation details, and an analysis of the testing results....

IMPLEMENTASI IP V 6 MULTICAST DALAM JARINGAN WIRELESS

Directory of Open Access Journals (Sweden)

Dessyanto Boedi Prasetyo

2015-04-01

Full Text Available Teleconferencing is a media technology to create a long-distance communication of audio data and video can also be data. With teleconferencing you can perform a communication with another person that much with a relatively low cost. At this time the use of computers in a network more complex. Some time ago has developed a new network protocol, the IPv6 is a solution to overcome the deficiencies found on previous generation protocol is IPv4 Multicast is a communication mechanism of one-to-many, or point-to-multipoint. In IPv6 technology, multicast is a basic feature and has become the standard specification of every router. In the implementation is done using IPv6 multicast teleconferencing application on the LAN network topology. At the teleconference has been observed with the amount of traffic parameters that occurred during the last teleconference. Used in this study SDR and RAT teleconferencing applications. SDR (Session Directory Tool and RAT (Robust Audio Tool used for teleconferencing, which is part of the MBone tools. Protocol MLD (Multicast Listener Directory is also used in this study for multicast signaling can run well.

Evaluating multicast resilience in carrier ethernet

DEFF Research Database (Denmark)

Ruepp, Sarah Renée; Wessing, Henrik; Zhang, Jiang

2010-01-01

This paper gives an overview of the Carrier Ethernet technology with specific focus on resilience. In particular, we show how multicast traffic, which is essential for IPTV can be protected. We detail the ackground for resilience mechanisms and their control and e present Carrier Ethernet...... resilience methods for linear nd ring networks. By simulation we show that the vailability of a multicast connection can be significantly increased by applying protection methods....

Optimización multiobjetivo para enrutamiento multicast en overlay networks utilizando algoritmos evolutivos Multiobjective Optimization for Multicast Routing in Overlay Networks using Evolutionary Algorithms

Directory of Open Access Journals (Sweden)

Juan Carlos Montoya M.

2008-06-01

Full Text Available Multicast juega un papel muy importante para soportar una nueva generación de aplicaciones. En la actualidad y por diferentes razones, técnicas y no técnicas, multicast IP no ha sido totalmente adoptado en Internet. Durante los últimos a˜nos, un área de investigación activa es la de implementar este tipo de tráfico desde la perspectiva del nivel de aplicación, donde la funcionalidad de multicast no es responsabilidad de los enrutadores sino de los hosts, a lo que se le conoce como Multicast Overlay Network (MON. En este artículo se plantea el enrutamiento en MON como un problema de Optimización Multiobjetivo (MOP donde se optimizan dos funciones: 1 el retardo total extremo a extremo del árbol multicast, y 2 la máxima utilización de los enlaces. La optimización simultánea de estas dos funciones es un problema NP completo y para resolverlo se propone utilizar Algoritmos Evolutivos Multiobjetivos (MOEA, específicamente NSGAIMulticast plays an important role in supporting a new generation of applications. At present and for different reasons, technical and non–technical, multicast IP hasn’t yet been totally adopted for Internet. During recent years, an active area of research is that of implementing this kind of traffic in the application layer where the multicast functionality isn´t a responsibility of the routers but that of the hosts, which we know as Multicast Overlay Networks (MON. In this article, routing in an MON is put forward as a multiobjective optimization problem (MOP where two functions are optimized: 1 the total end to end delay of the multicast tree and 2 the maximum link utilization. The simultaneous optimization of these two functions is an NP–Complete problem and to solve this we suggest using Multiobjective Evolutionary Algorithms (MOEA, specifically NSGA–II.

Key Management for Secure Multicast over IPv6 Wireless Networks

Directory of Open Access Journals (Sweden)

Siddiqi Mohammad Umar

2006-01-01

Full Text Available Multicasting is an efficient method for transmission and routing of packets to multiple destinations using fewer network resources. Along with widespread deployment of wireless networks, secure multicast over wireless networks is an important and challenging goal. In this paper, we extend the scope of a recent new key distribution scheme to a security framework that offers a novel solution for secure multicast over IPv6 wireless networks. Our key management framework includes two scenarios for securely distributing the group key and rekey messages for joining and leaving a mobile host in secure multicast group. In addition, we perform the security analysis and provide performance comparisons between our approach and two recently published scenarios. The benefits of our proposed techniques are that they minimize the number of transmissions required to rekey the multicast group and impose minimal storage requirements on the multicast group. In addition, our proposed schemes are also very desirable from the viewpoint of transmission bandwidth savings since an efficient rekeying mechanism is provided for membership changes and they significantly reduce the required bandwidth due to key updating in mobile networks. Moreover, they achieve the security and scalability requirements in wireless networks.

Multicasting in Wireless Communications (Ad-Hoc Networks): Comparison against a Tree-Based Approach

Science.gov (United States)

Rizos, G. E.; Vasiliadis, D. C.

2007-12-01

We examine on-demand multicasting in ad hoc networks. The Core Assisted Mesh Protocol (CAMP) is a well-known protocol for multicast routing in ad-hoc networks, generalizing the notion of core-based trees employed for internet multicasting into multicast meshes that have much richer connectivity than trees. On the other hand, wireless tree-based multicast routing protocols use much simpler structures for determining route paths, using only parent-child relationships. In this work, we compare the performance of the CAMP protocol against the performance of wireless tree-based multicast routing protocols, in terms of two important factors, namely packet delay and ratio of dropped packets.

Construction of Light-trees for WDM Multicasting under Splitting Capability Constraints

DEFF Research Database (Denmark)

Zsigri, Anikó; Guitton, A.; Molnár, M.

2003-01-01

Communication systems with all-optical multicasting have better performance than those using optical/electrical/optical conversion. Multicast protocols assume that all nodes in the network can forward the signal from one input to several outputs. Since fabrication of an optical switch with splitt......Communication systems with all-optical multicasting have better performance than those using optical/electrical/optical conversion. Multicast protocols assume that all nodes in the network can forward the signal from one input to several outputs. Since fabrication of an optical switch...

An Economic Case for End System Multicast

Science.gov (United States)

Analoui, Morteza; Rezvani, Mohammad Hossein

This paper presents a non-strategic model for the end-system multicast networks based on the concept of replica exchange economy. We believe that microeconomics is a good candidate to investigate the problem of selfishness of the end-users (peers) in order to maximize the aggregate throughput. In this solution concept, the decisions that a peer might make, does not affect the actions of the other peers at all. The proposed mechanism tunes the price of the service in such a way that general equilibrium holds.

A Multicast Sparse-Grooming Algorithm Based on Network Coding in WDM Networks

Science.gov (United States)

Zhang, Shengfeng; Peng, Han; Sui, Meng; Liu, Huanlin

2015-03-01

To improve the limited number of wavelength utilization and decrease the traffic blocking probability in sparse-grooming wavelength-division multiplexing (WDM) networks, a multicast sparse-grooming algorithm based on network coding (MCSA-NC) is put forward to solve the routing problem for dynamic multicast requests in this paper. In the proposed algorithm, a traffic partition strategy, that the coarse-granularity multicast request with grooming capability on the source node is split into several fine-granularity multicast requests, is designed so as to increase the probability for traffic grooming successfully in MCSA-NC. Besides considering that multiple destinations should receive the data from source of the multicast request at the same time, the traditional transmission mechanism is improved by constructing edge-disjoint paths for each split multicast request. Moreover, in order to reduce the number of wavelengths required and further decrease the traffic blocking probability, a light-tree reconfiguration mechanism is presented in the MCSA-NC, which can select a minimal cost light tree from the established edge-disjoint paths for a new multicast request.

Deploying Next Generation Multicast-enabled Applications Label Switched Multicast for MPLS VPNs, VPLS, and Wholesale Ethernet

CERN Document Server

Joseph, Vinod

2011-01-01

The growth, scale, and prominence of video applications over the years have placed emphasis on the most scalable and efficient way to deliver multi-play content (voice, video and data) to the end user. Multicast is the most effective and efficient carrier of video applications from a network standpoint. Financial organizations deploy large-scale multicast infrastructures to enable trading and e-commerce. The introduction of 4G and beyond makes this technology even more indispensible since mobile operators need an efficient mechanism to deliver repetitive content to many a handset, and multicas

Efficient round-robin multicast scheduling for input-queued switches

DEFF Research Database (Denmark)

Rasmussen, Anders; Yu, Hao; Ruepp, Sarah Renée

2014-01-01

The input-queued (IQ) switch architecture is favoured for designing multicast high-speed switches because of its scalability and low implementation complexity. However, using the first-in-first-out (FIFO) queueing discipline at each input of the switch may cause the head-of-line (HOL) blocking...... problem. Using a separate queue for each output port at an input to reduce the HOL blocking, that is, the virtual output queuing discipline, increases the implementation complexity, which limits the scalability. Given the increasing link speed and network capacity, a low-complexity yet efficient multicast...... by means of queue look-ahead. Simulation results demonstrate that this FIFO-based IQ multicast architecture is able to achieve significant improvements in terms of multicast latency requirements by searching through a small number of cells beyond the HOL cells in the input queues. Furthermore, hardware...

Energy-Efficient Resource and Power Allocation for Underlay Multicast Device-to-Device Transmission

Directory of Open Access Journals (Sweden)

Fan Jiang

2017-11-01

Full Text Available In this paper, we present an energy-efficient resource allocation and power control scheme for D2D (Device-to-Device multicasting transmission. The objective is to maximize the overall energy-efficiency of D2D multicast clusters through effective resource allocation and power control schemes, while considering the quality of service (QoS requirements of both cellular users (CUs and D2D clusters. We first build the optimization model and a heuristic resource and power allocation algorithm is then proposed to solve the energy-efficiency problem with less computational complexity. Numerical results indicate that the proposed algorithm outperforms existing schemes in terms of throughput per energy consumption.

Maximization Network Throughput Based on Improved Genetic Algorithm and Network Coding for Optical Multicast Networks

Science.gov (United States)

Wei, Chengying; Xiong, Cuilian; Liu, Huanlin

2017-12-01

Maximal multicast stream algorithm based on network coding (NC) can improve the network's throughput for wavelength-division multiplexing (WDM) networks, which however is far less than the network's maximal throughput in terms of theory. And the existing multicast stream algorithms do not give the information distribution pattern and routing in the meantime. In the paper, an improved genetic algorithm is brought forward to maximize the optical multicast throughput by NC and to determine the multicast stream distribution by hybrid chromosomes construction for multicast with single source and multiple destinations. The proposed hybrid chromosomes are constructed by the binary chromosomes and integer chromosomes, while the binary chromosomes represent optical multicast routing and the integer chromosomes indicate the multicast stream distribution. A fitness function is designed to guarantee that each destination can receive the maximum number of decoding multicast streams. The simulation results showed that the proposed method is far superior over the typical maximal multicast stream algorithms based on NC in terms of network throughput in WDM networks.

A Novel Video Data-Source Authentication Model Based on Digital Watermarking and MAC in Multicast

Institute of Scientific and Technical Information of China (English)

ZHAO Anjun; LU Xiangli; GUO Lei

2006-01-01

A novel video data authentication model based on digital video watermarking and MAC (message authentication code) in multicast protocol is proposed in this paper. The digital watermarking which composes of the MAC of the significant video content, the key and instant authentication data is embedded into the insignificant video component by the MLUT (modified look-up table) video watermarking technology. We explain a method that does not require storage of each data packet for a time, thus making receiver not vulnerable to DOS (denial of service) attack. So the video packets can be authenticated instantly without large volume buffer in the receivers. TESLA(timed efficient stream loss-tolerant authentication) does not explain how to select the suitable value for d, which is an important parameter in multicast source authentication. So we give a method to calculate the key disclosure delay (number of intervals). Simulation results show that the proposed algorithms improve the performance of data source authentication in multicast.

Stateless multicast switching in software defined networks

OpenAIRE

Reed, Martin J.; Al-Naday, Mays; Thomos, Nikolaos; Trossen, Dirk; Petropoulos, George; Spirou, Spiros

2016-01-01

Multicast data delivery can significantly reduce traffic in operators' networks, but has been limited in deployment due to concerns such as the scalability of state management. This paper shows how multicast can be implemented in contemporary software defined networking (SDN) switches, with less state than existing unicast switching strategies, by utilising a Bloom Filter (BF) based switching technique. Furthermore, the proposed mechanism uses only proactive rule insertion, and thus, is not l...

Cooperative relay-based multicasting for energy and delay minimization

KAUST Repository

Atat, Rachad

2012-08-01

Relay-based multicasting for the purpose of cooperative content distribution is studied. Optimized relay selection is performed with the objective of minimizing the energy consumption or the content distribution delay within a cluster of cooperating mobiles. Two schemes are investigated. The first consists of the BS sending the data only to the relay, and the second scheme considers the scenario of threshold-based multicasting by the BS, where a relay is selected to transmit the data to the mobiles that were not able to receive the multicast data. Both schemes show significant superiority compared to the non-cooperative scenarios, in terms of energy consumption and delay reduction. © 2012 IEEE.

Simultaneous multichannel wavelength multicasting and XOR logic gate multicasting for three DPSK signals based on four-wave mixing in quantum-dot semiconductor optical amplifier.

Science.gov (United States)

Qin, Jun; Lu, Guo-Wei; Sakamoto, Takahide; Akahane, Kouichi; Yamamoto, Naokatsu; Wang, Danshi; Wang, Cheng; Wang, Hongxiang; Zhang, Min; Kawanishi, Tetsuya; Ji, Yuefeng

2014-12-01

In this paper, we experimentally demonstrate simultaneous multichannel wavelength multicasting (MWM) and exclusive-OR logic gate multicasting (XOR-LGM) for three 10Gbps non-return-to-zero differential phase-shift-keying (NRZ-DPSK) signals in quantum-dot semiconductor optical amplifier (QD-SOA) by exploiting the four-wave mixing (FWM) process. No additional pump is needed in the scheme. Through the interaction of the input three 10Gbps DPSK signal lights in QD-SOA, each channel is successfully multicasted to three wavelengths (1-to-3 for each), totally 3-to-9 MWM, and at the same time, three-output XOR-LGM is obtained at three different wavelengths. All the new generated channels are with a power penalty less than 1.2dB at a BER of 10(-9). Degenerate and non-degenerate FWM components are fully used in the experiment for data and logic multicasting.

Secure Group Communications for Large Dynamic Multicast Group

Institute of Scientific and Technical Information of China (English)

Liu Jing; Zhou Mingtian

2003-01-01

As the major problem in multicast security, the group key management has been the focus of research But few results are satisfactory. In this paper, the problems of group key management and access control for large dynamic multicast group have been researched and a solution based on SubGroup Secure Controllers (SGSCs) is presented, which solves many problems in IOLUS system and WGL scheme.

A novel WDM passive optical network architecture supporting two independent multicast data streams

Science.gov (United States)

Qiu, Yang; Chan, Chun-Kit

2012-01-01

We propose a novel scheme to perform optical multicast overlay of two independent multicast data streams on a wavelength-division-multiplexed (WDM) passive optical network. By controlling a sinusoidal clock signal and shifting the wavelength at the optical line terminal (OLT), the delivery of the two multicast data, being carried by the generated optical tones, can be independently and flexibly controlled. Simultaneous transmission of 10-Gb/s unicast downstream and upstream data as well as two independent 10-Gb/s multicast data was successfully demonstrated.

A multicast tree aggregation algorithm in wavelength-routed WDM networks

Science.gov (United States)

Cheng, Hsu-Chen; Kuo, Chin-Chun; Lin, Frank Y.

2005-02-01

Wavelength division multiplexing (WDM) has been considered a promising transmission technology in optical communication networks. With the continuous advance in optical technology, WDM network will play an important role in wide area backbone networks. Optical wavelength switching, compared with optical packet switching, is a more mature and more cost-effective choice for optical switching technologies. Besides, the technology of time division multiplexing in optical communication networks has been working smoothly for a long time. In the proposed research, the problem of multicast groups aggregation and multicast routing and wavelength assignment in wavelength-routed WDM network is studied. The optical cross connect switches in the problem are assumed to have limited optical multicast/splitting and TDM functionalities. Given the physical network topology and capacity, the objective is to maximize the total revenue by means of utmost merging multicast groups into larger macro-groups. The groups in the same macro-group will share a multicast tree to conduct data transmission. The problem is formulated as an optimization problem, where the objective function is to maximize the total revenue subject to capacity constraints of components in the optical network, wavelength continuity constraints, and tree topology constraints. The decision variables in the formulations include the merging results between groups, multicast tree routing assignment and wavelength assignment. The basic approach to the algorithm development for this model is Lagrangean relaxation in conjunction with a number of optimization techniques. In computational experiments, the proposed algorithms are evaluated on different network topologies and perform efficiently and effectively according to the experiment results.

Integration of look-ahead multicast and unicast scheduling for input-queued cell switches

DEFF Research Database (Denmark)

Yu, Hao; Ruepp, Sarah Renée; Berger, Michael Stübert

2012-01-01

This paper presents an integration of multicast and unicast traffic scheduling algorithms for input-queued cell switches. The multi-level round-robin multicast scheduling (ML-RRMS) algorithm with the look-ahead (LA) mechanism provides a highly scalable architecture and is able to reduce the head...... module that filters out the conflicting requests to ensure fairness. Simulation results show that comparing with the scheme using WBA for the multicast scheduling, the scheme proposed in this paper reduces the HOL blocking problem for multicast traffic and provides a significant improvement in terms...

Minimum Interference Channel Assignment Algorithm for Multicast in a Wireless Mesh Network

Directory of Open Access Journals (Sweden)

Sangil Choi

2016-12-01

Full Text Available Wireless mesh networks (WMNs have been considered as one of the key technologies for the configuration of wireless machines since they emerged. In a WMN, wireless routers provide multi-hop wireless connectivity between hosts in the network and also allow them to access the Internet via gateway devices. Wireless routers are typically equipped with multiple radios operating on different channels to increase network throughput. Multicast is a form of communication that delivers data from a source to a set of destinations simultaneously. It is used in a number of applications, such as distributed games, distance education, and video conferencing. In this study, we address a channel assignment problem for multicast in multi-radio multi-channel WMNs. In a multi-radio multi-channel WMN, two nearby nodes will interfere with each other and cause a throughput decrease when they transmit on the same channel. Thus, an important goal for multicast channel assignment is to reduce the interference among networked devices. We have developed a minimum interference channel assignment (MICA algorithm for multicast that accurately models the interference relationship between pairs of multicast tree nodes using the concept of the interference factor and assigns channels to tree nodes to minimize interference within the multicast tree. Simulation results show that MICA achieves higher throughput and lower end-to-end packet delay compared with an existing channel assignment algorithm named multi-channel multicast (MCM. In addition, MICA achieves much lower throughput variation among the destination nodes than MCM.

A Scalable and Fault-Tolerant Architecture for Internet Multicasting Using Meshes

National Research Council Canada - National Science Library

Garcia-Luna-Aceves, J. J; Balasubramaniyan, Saravanan; Balakrishnan, Ramesh

2002-01-01

... communication within a group. A new protocol is presented for the creation and management of multicast meshes that substitute for the traditional multicast trees as the underlying routing structure for multipoint communication within groups...

Adaptive Modulation for a Downlink Multicast Channel in OFDMA Systems

DEFF Research Database (Denmark)

Wang, Haibo; Schwefel, Hans-Peter; Toftegaard, Thomas Skjødeberg

2007-01-01

In this paper we focus on adaptive modulation strategies for multicast service in orthogonal frequency division multiple access systems. A reward function has been defined as the optimization target, which includes both the average user throughput and bit error rate. We also developed an adaptive...... modulation strategy, namely local best reward strategy, to maximize this reward function. The performance of different modulation strategies are compared in different SNR distribution scenarios, and the optimum strategy in each scenario is suggested....

Design, Implementation, and Performance Evaluation of Efficient PMIPv6 Based Mobile Multicast Sender Support Schemes

Directory of Open Access Journals (Sweden)

Lili Wang

2015-01-01

Full Text Available Proxy Mobile IPv6 (PMIPv6 is proposed as a promising network-based mobility management protocol, which does not need any participation of mobile nodes. PMIPv6 does not support the multicast well and most of the current research concentrates on the mobile multicast receiver. However, the mobile multicast sender is also very important and challenging, which has not been addressed well. Therefore, in this paper we propose two efficient PMIPv6 based mobile multicast sender support schemes which are PMIP bidirectional tunneling (PMIP-BT and PMIP direct routing (PMIP-DR. In the PMIP-BT, the multicast traffic can be delivered through the PMIPv6 bidirectional tunnel, while, in the PMIP-DR, the multicast data can be transmitted via an optimized direct multicast routing. Both of them can support the multicast sender mobility transparently enabled in the PMIPv6 networks. We evaluate the performance of the proposed schemes by theoretical analysis, and the numerical results show that the proposed schemes have a better performance in terms of the signaling cost than the current schemes. Meanwhile, the proposed schemes are also implemented on the test bed, and the experimental results not only verify the validity and feasibility of our proposed schemes, but also conclude the different scenarios to which they are applicable.

End-to-End Mechanisms for Rate-Adaptive Multicast Streaming over the Internet

OpenAIRE

Rimac, Ivica

2005-01-01

Continuous media applications over packet-switched networks are becoming more and more popular. Radio stations, for example, already use streaming technology to disseminate their content to users on the Internet, and video streaming services are expected to experience similar popularity. In contrast to traditional television and radio broadcast systems, however, prevalent Internet streaming solutions are based on unicast communication and raise scalability and efficiency issues. Multicast com...

Pseudo-Cycle-Based Multicast Routing in Wormhole-Routed Networks

Institute of Scientific and Technical Information of China (English)

SONG JianPing (宋建平); HOU ZiFeng (侯紫峰); XU Ming (许铭)

2003-01-01

This paper addresses the problem of fault-tolerant multicast routing in wormholerouted multicomputers. A new pseudo-cycle-based routing method is presented for constructing deadlock-free multicast routing algorithms. With at most two virtual channels this technique can be applied to any connected networks with arbitrary topologies. Simulation results show that this technique results in negligible performance degradation even in the presence of a large number of faulty nodes.

Multisites Coordination in Shared Multicast Trees

National Research Council Canada - National Science Library

Dommel, H-P; Garcia-Luna-Aceves, J. J

1999-01-01

.... The protocol supports Internet-wide coordination for large and highly interactive groupwork, relying on transmission of coordination directives between group members across a shared end-to-end multicast tree...

Simultaneous Wireless Power Transfer and Secure Multicasting in Cooperative Decode-and-Forward Relay Networks.

Science.gov (United States)

Lee, Jong-Ho; Sohn, Illsoo; Kim, Yong-Hwa

2017-05-16

In this paper, we investigate simultaneous wireless power transfer and secure multicasting via cooperative decode-and-forward (DF) relays in the presence of multiple energy receivers and eavesdroppers. Two scenarios are considered under a total power budget: maximizing the minimum harvested energy among the energy receivers under a multicast secrecy rate constraint; and maximizing the multicast secrecy rate under a minimum harvested energy constraint. For both scenarios, we solve the transmit power allocation and relay beamformer design problems by using semidefinite relaxation and bisection technique. We present numerical results to analyze the energy harvesting and secure multicasting performances in cooperative DF relay networks.

Out-of-Sequence Preventative Cell Dispatching for Multicast Input-Queued Space-Memory-Memory Clos-Network

DEFF Research Database (Denmark)

Yu, Hao; Ruepp, Sarah Renée; Berger, Michael Stübert

2011-01-01

This paper proposes two out-of-sequence (OOS) preventative cell dispatching algorithms for the multicast input-queued space-memory-memory (IQ-SMM) Clos-network switch architecture, i.e. the multicast flow-based DSRR (MF-DSRR) and the multicast flow-based round-robin (MFRR). Treating each cell...

Improvement of the Response Time in an Open Source Audioconference Architecture Based on SIP Multicast Implemented with JainSIP, JainSDP and JGAP Libraries

Directory of Open Access Journals (Sweden)

Carlos M. Moreno

2014-06-01

Full Text Available Group services like the audioconference require a minimum level of quality of service for multicast sessions. This work proposes a new overlay multicast architecture based on SIP extensions and a genetic algorithm. The architecture consists of a SIP Extender client (SE, a Multicast Gateway Agent (MGA and a Multicast Manager (MM. The SE receives information about the most adequate MGA for it determined by a genetic algorithm inside the MM, then connects the chosen MGA and maintains connection with the MM itself. The genetic algorithm is implemented with JGAP(Java Genetic Algorithm Package libraries. The SE and MGA are programmed with JainSIP and JainSDP libraries which contain Java structures associated with the SIP protocol and session description. Some experiments over UTP wired and WiFi IEEE802.11n network were performed. Partial results with static and dynamic MGA selection show that, if we compare the joining and leaving time measured inside a station containing SE client programmed with JainSIP and JainSDP libraries versus SJphone proprietary client, the software engineering may have more influence than the medium access method in the response time for a potential group member. Even more, the genetic algorithm at the MM minimizes the response time at great scale.

Increase in Multicast OFDM Data Rate in PLC Network using Adaptive LP-OFDM

OpenAIRE

Maiga , Ali; Baudais , Jean-Yves; Hélard , Jean-François

2009-01-01

ISBN: 978-1-4244-3523-4; International audience; Linear precoding (LP) technique applied to OFDM systems has already proved its ability to significantly increase the system throughput in a powerline communication (PLC) context. In this paper, we propose resource allocation algorithms based on the LP technique to increase the multicast OFDM systems bit rate. The conventional multicast capacity is limited by the user which experiences the worst channel conditions. To increase the multicast bit ...

Optimizing Energy and Modulation Selection in Multi-Resolution Modulation For Wireless Video Broadcast/Multicast

KAUST Repository

She, James

2009-11-01

Emerging technologies in Broadband Wireless Access (BWA) networks and video coding have enabled high-quality wireless video broadcast/multicast services in metropolitan areas. Joint source-channel coded wireless transmission, especially using hierarchical/superposition coded modulation at the channel, is recognized as an effective and scalable approach to increase the system scalability while tackling the multi-user channel diversity problem. The power allocation and modulation selection problem, however, is subject to a high computational complexity due to the nonlinear formulation and huge solution space. This paper introduces a dynamic programming framework with conditioned parsing, which significantly reduces the search space. The optimized result is further verified with experiments using real video content. The proposed approach effectively serves as a generalized and practical optimization framework that can gauge and optimize a scalable wireless video broadcast/multicast based on multi-resolution modulation in any BWA network.

Optimizing Energy and Modulation Selection in Multi-Resolution Modulation For Wireless Video Broadcast/Multicast

KAUST Repository

She, James; Ho, Pin-Han; Shihada, Basem

2009-01-01

Emerging technologies in Broadband Wireless Access (BWA) networks and video coding have enabled high-quality wireless video broadcast/multicast services in metropolitan areas. Joint source-channel coded wireless transmission, especially using hierarchical/superposition coded modulation at the channel, is recognized as an effective and scalable approach to increase the system scalability while tackling the multi-user channel diversity problem. The power allocation and modulation selection problem, however, is subject to a high computational complexity due to the nonlinear formulation and huge solution space. This paper introduces a dynamic programming framework with conditioned parsing, which significantly reduces the search space. The optimized result is further verified with experiments using real video content. The proposed approach effectively serves as a generalized and practical optimization framework that can gauge and optimize a scalable wireless video broadcast/multicast based on multi-resolution modulation in any BWA network.

Simultaneous Wireless Power Transfer and Secure Multicasting in Cooperative Decode-and-Forward Relay Networks

Science.gov (United States)

Lee, Jong-Ho; Sohn, Illsoo; Kim, Yong-Hwa

2017-01-01

In this paper, we investigate simultaneous wireless power transfer and secure multicasting via cooperative decode-and-forward (DF) relays in the presence of multiple energy receivers and eavesdroppers. Two scenarios are considered under a total power budget: maximizing the minimum harvested energy among the energy receivers under a multicast secrecy rate constraint; and maximizing the multicast secrecy rate under a minimum harvested energy constraint. For both scenarios, we solve the transmit power allocation and relay beamformer design problems by using semidefinite relaxation and bisection technique. We present numerical results to analyze the energy harvesting and secure multicasting performances in cooperative DF relay networks. PMID:28509841

Simultaneous Wireless Power Transfer and Secure Multicasting in Cooperative Decode-and-Forward Relay Networks

Directory of Open Access Journals (Sweden)

Jong-Ho Lee

2017-05-01

Full Text Available In this paper, we investigate simultaneous wireless power transfer and secure multicasting via cooperative decode-and-forward (DF relays in the presence of multiple energy receivers and eavesdroppers. Two scenarios are considered under a total power budget: maximizing the minimum harvested energy among the energy receivers under a multicast secrecy rate constraint; and maximizing the multicast secrecy rate under a minimum harvested energy constraint. For both scenarios, we solve the transmit power allocation and relay beamformer design problems by using semidefinite relaxation and bisection technique. We present numerical results to analyze the energy harvesting and secure multicasting performances in cooperative DF relay networks.

Mobility Based Key Management Technique for Multicast Security in Mobile Ad Hoc Networks

Directory of Open Access Journals (Sweden)

B. Madhusudhanan

2015-01-01

Full Text Available In MANET multicasting, forward and backward secrecy result in increased packet drop rate owing to mobility. Frequent rekeying causes large message overhead which increases energy consumption and end-to-end delay. Particularly, the prevailing group key management techniques cause frequent mobility and disconnections. So there is a need to design a multicast key management technique to overcome these problems. In this paper, we propose the mobility based key management technique for multicast security in MANET. Initially, the nodes are categorized according to their stability index which is estimated based on the link availability and mobility. A multicast tree is constructed such that for every weak node, there is a strong parent node. A session key-based encryption technique is utilized to transmit a multicast data. The rekeying process is performed periodically by the initiator node. The rekeying interval is fixed depending on the node category so that this technique greatly minimizes the rekeying overhead. By simulation results, we show that our proposed approach reduces the packet drop rate and improves the data confidentiality.

WDM Multicast Tree Construction Algorithms and Their Comparative Evaluations

Science.gov (United States)

Makabe, Tsutomu; Mikoshi, Taiju; Takenaka, Toyofumi

We propose novel tree construction algorithms for multicast communication in photonic networks. Since multicast communications consume many more link resources than unicast communications, effective algorithms for route selection and wavelength assignment are required. We propose a novel tree construction algorithm, called the Weighted Steiner Tree (WST) algorithm and a variation of the WST algorithm, called the Composite Weighted Steiner Tree (CWST) algorithm. Because these algorithms are based on the Steiner Tree algorithm, link resources among source and destination pairs tend to be commonly used and link utilization ratios are improved. Because of this, these algorithms can accept many more multicast requests than other multicast tree construction algorithms based on the Dijkstra algorithm. However, under certain delay constraints, the blocking characteristics of the proposed Weighted Steiner Tree algorithm deteriorate since some light paths between source and destinations use many hops and cannot satisfy the delay constraint. In order to adapt the approach to the delay-sensitive environments, we have devised the Composite Weighted Steiner Tree algorithm comprising the Weighted Steiner Tree algorithm and the Dijkstra algorithm for use in a delay constrained environment such as an IPTV application. In this paper, we also give the results of simulation experiments which demonstrate the superiority of the proposed Composite Weighted Steiner Tree algorithm compared with the Distributed Minimum Hop Tree (DMHT) algorithm, from the viewpoint of the light-tree request blocking.

Delay Bounded Multi-Source Multicast in Software-Defined Networking

Directory of Open Access Journals (Sweden)

Thabo Semong

2018-01-01

Full Text Available Software-Defined Networking (SDN is the next generation network architecture with exciting application prospects. The control function in SDN is decoupled from the data forwarding plane, hence it provides a new centralized architecture with flexible network resource management. Although SDN is attracting much attention from both industry and research, its advantage over the traditional networks has not been fully utilized. Multicast is designed to deliver content to multiple destinations. The current traffic engineering in SDN focuses mainly on unicast, however, multicast can effectively reduce network resource consumption by serving multiple clients. This paper studies a novel delay-bounded multi-source multicast SDN problem, in which among the set of potential sources, we select a source to build the multicast-tree, under the constraint that the transmission delay for every destination is bounded. This problem is more difficult than the traditional Steiner minimum tree (SMT problem, since it needs to find a source from the set of all potential sources. We model the problem as a mixed-integer linear programming (MILP and prove its NP-Hardness. To solve the problem, a delay bounded multi-source (DBMS scheme is proposed, which includes a DBMS algorithm to build a minimum delay cost DBMS-Forest. Through a MATLAB experiment, we demonstrate that DBMS is significantly more efficient and outperforms other existing algorithms in the literature.

Optimization of multicast optical networks with genetic algorithm

Science.gov (United States)

Lv, Bo; Mao, Xiangqiao; Zhang, Feng; Qin, Xi; Lu, Dan; Chen, Ming; Chen, Yong; Cao, Jihong; Jian, Shuisheng

2007-11-01

In this letter, aiming to obtain the best multicast performance of optical network in which the video conference information is carried by specified wavelength, we extend the solutions of matrix games with the network coding theory and devise a new method to solve the complex problems of multicast network switching. In addition, an experimental optical network has been testified with best switching strategies by employing the novel numerical solution designed with an effective way of genetic algorithm. The result shows that optimal solutions with genetic algorithm are accordance with the ones with the traditional fictitious play method.

Enhanced first-in-first-out-based round-robin multicast scheduling algorithm for input-queued switches

DEFF Research Database (Denmark)

Yu, Hao; Ruepp, Sarah Renée; Berger, Michael Stübert

2011-01-01

This study focuses on the multicast scheduling for M × N input-queued switches. An enhanced first-in-first-out -based round-robin multicast scheduling algorithm is proposed with a function of searching deeper into queues to reduce the head-of-line (HOL) blocking problem and thereby the multicast...... out on the decision matrix to reduce the number of transmission for each cell. To reduce the HOL blocking problem, a complement matrix is constructed based on the traffic matrix and the decision matrix, and a process of searching deeper into the queues is carried out to find cells that can be sent...... to the idle outputs. Simulation results show that the proposed function of searching deeper into the queues can alleviate the HOL blocking and as a result reduce the multicast latency significantly. Under both balanced and unbalanced multicast traffic, the proposed algorithm is able to maintain a stable...

Multi-Objective Resource Allocation Scheme for D2D Multicast with QoS Guarantees in Cellular Networks

Directory of Open Access Journals (Sweden)

Fangmin Li

2016-09-01

Full Text Available Device-to-device (D2D multicast communication can greatly improve the spectrum utilization in a content delivery scenario. However, the co-channel interference and power consumption brought by D2D bring new challenges. All the D2D multicast groups expect to achieve a higher system capacity with less extra energy cost. In this paper, we investigate the uplink resource allocation issue when D2D multicast groups share the resources with other cellular uses (CUs, while guaranteeing a certain level of quality of service (QoS to CUs and D2D users. Firstly we address a flexible tradeoff framework in which the system power consumption and the system capacity (i.e., the number of admitted D2D links are assigned with different weight factors so that these two objectives are jointly considered. Then we propose an efficient resource optimization scheme, which comprises sub-channel allocation and signal-to-interference- plus-noise ratio (SINR assignment. Numerical results validate the effectiveness of the proposed framework, and demonstrate the advantages in dealing with the proposed multi-objective optimization problem.

Dynamic Programming Optimization of Multi-rate Multicast Video-Streaming Services

Directory of Open Access Journals (Sweden)

Nestor Michael Caños Tiglao

2010-06-01

Full Text Available In large scale IP Television (IPTV and Mobile TV distributions, the video signal is typically encoded and transmitted using several quality streams, over IP Multicast channels, to several groups of receivers, which are classified in terms of their reception rate. As the number of video streams is usually constrained by both the number of TV channels and the maximum capacity of the content distribution network, it is necessary to find the selection of video stream transmission rates that maximizes the overall user satisfaction. In order to efficiently solve this problem, this paper proposes the Dynamic Programming Multi-rate Optimization (DPMO algorithm. The latter was comparatively evaluated considering several user distributions, featuring different access rate patterns. The experimental results reveal that DPMO is significantly more efficient than exhaustive search, while presenting slightly higher execution times than the non-optimal Multi-rate Step Search (MSS algorithm.

Preventing Out-of-Sequence for Multicast Input-Queued Space-Memory-Memory Clos-Network

DEFF Research Database (Denmark)

Yu, Hao; Ruepp, Sarah Renée; Berger, Michael Stübert

2011-01-01

This paper proposes an out-of-sequence (OOS) preventative cell dispatching algorithm, the multicast flow-based round robin (MFRR), for multicast input-queued space-memory-memory (IQ-SMM) Clos-network architecture. Independently treating each incoming cell, such as the desynchronized static round...

A Multicast Protocol Utilizing On-demand Routing Strategy for MPRN

Institute of Scientific and Technical Information of China (English)

无

2002-01-01

This paper proposes a multicast protocol utilizing ondemand routing strategy for mobile packet radio network. It does not maintain permanent route tables with full topological views. Instead, multicast senders apply on-demand procedures to dynamically discover routes and build forwarding group in this protocol. The data packets are propagated by each forwarding group member via scoped flooding, so the protocol can reduce network bandwidth overhead and avoid the propagation of potentially large routing updates throughout the network.

Dynamic segment shared protection for multicast traffic in meshed wavelength-division-multiplexing optical networks

Science.gov (United States)

Liao, Luhua; Li, Lemin; Wang, Sheng

2006-12-01

We investigate the protection approach for dynamic multicast traffic under shared risk link group (SRLG) constraints in meshed wavelength-division-multiplexing optical networks. We present a shared protection algorithm called dynamic segment shared protection for multicast traffic (DSSPM), which can dynamically adjust the link cost according to the current network state and can establish a primary light-tree as well as corresponding SRLG-disjoint backup segments for a dependable multicast connection. A backup segment can efficiently share the wavelength capacity of its working tree and the common resources of other backup segments based on SRLG-disjoint constraints. The simulation results show that DSSPM not only can protect the multicast sessions against a single-SRLG breakdown, but can make better use of the wavelength resources and also lower the network blocking probability.

Polarization Insensitive One-to-Six WDM Multicasting in a Silicon Nanowire

DEFF Research Database (Denmark)

Pu, Minhao; Hu, Hao; Peucheret, Christophe

2012-01-01

We present polarization insensitive one-to-six WDM multicasting based on nondegenerate four-wave mixing in a silicon nanowire with angled-pump scheme. Bit-error rate measurements are performed and error-free operation is achieved.......We present polarization insensitive one-to-six WDM multicasting based on nondegenerate four-wave mixing in a silicon nanowire with angled-pump scheme. Bit-error rate measurements are performed and error-free operation is achieved....

Hybrid monitoring scheme for end-to-end performance enhancement of multicast-based real-time media

Science.gov (United States)

Park, Ju-Won; Kim, JongWon

2004-10-01

As real-time media applications based on IP multicast networks spread widely, end-to-end QoS (quality of service) provisioning for these applications have become very important. To guarantee the end-to-end QoS of multi-party media applications, it is essential to monitor the time-varying status of both network metrics (i.e., delay, jitter and loss) and system metrics (i.e., CPU and memory utilization). In this paper, targeting the multicast-enabled AG (Access Grid) a next-generation group collaboration tool based on multi-party media services, the applicability of hybrid monitoring scheme that combines active and passive monitoring is investigated. The active monitoring measures network-layer metrics (i.e., network condition) with probe packets while the passive monitoring checks both application-layer metrics (i.e., user traffic condition by analyzing RTCP packets) and system metrics. By comparing these hybrid results, we attempt to pinpoint the causes of performance degradation and explore corresponding reactions to improve the end-to-end performance. The experimental results show that the proposed hybrid monitoring can provide useful information to coordinate the performance improvement of multi-party real-time media applications.

Throughput, Energy and Overhead of Multicast Device-to-Device Communications with Network Coded Cooperation

DEFF Research Database (Denmark)

Hernandez, Nestor; Heide, Janus; Roetter, Daniel Enrique Lucani

2017-01-01

, this assumes that the throughput gains and energy savings in multicasting are much larger between devices than the base station to the receivers. However, current mobile networks suffer from many different issues varying the performance in data rates, which calls into question these assumptions. Therefore......, a first objective of this work is to assess the operating regions where employing cooperation results in higher throughput and/or energy savings. We consider multicast scenarios with network coded mechanisms employing Random Linear Network Coding (RLNC). However, although RLNC is good for low amount...... of transmissions in multicast, it has an inherent overhead from extreme high or low field related caveats. Thus, as a second objective, we review and propose the application of new network codes that posses low overhead for multicasting, by having a short representation and low dependence probability. We provide...

The value of service reliability

OpenAIRE

Benezech , Vincent; Coulombel , Nicolas

2013-01-01

International audience; This paper studies the impact of service frequency and reliability on the choice of departure time and the travel cost of transit users. When the user has (α, β, γ) scheduling preferences, we show that the optimal head start decreases with service reliability, as expected. It does not necessarily decrease with service frequency, however. We derive the value of service headway (VoSH) and the value of service reliability (VoSR), which measure the marginal effect on the e...

Bit rate maximization for multicast LP-OFDM systems in PLC context

OpenAIRE

Maiga , Ali; Baudais , Jean-Yves; Hélard , Jean-François

2009-01-01

ISBN: 978-88-900984-8-2.; International audience; In this paper, we propose a new resource allocation algorithm based on linear precoding technique for multicast OFDM systems. Linear precoding technique applied to OFDM systems has already proved its ability to significantly increase the system throughput in a powerline communication (PLC) context. Simulations through PLC channels show that this algorithm outperforms the classical multicast method (up to 7.3% bit rate gain) and gives better pe...

Design of an IPTV Multicast System for Internet Backbone Networks

Directory of Open Access Journals (Sweden)

T. H. Szymanski

2010-01-01

Full Text Available The design of an IPTV multicast system for the Internet backbone network is presented and explored through extensive simulations. In the proposed system, a resource reservation algorithm such as RSVP, IntServ, or DiffServ is used to reserve resources (i.e., bandwidth and buffer space in each router in an IP multicast tree. Each router uses an Input-Queued, Output-Queued, or Crosspoint-Queued switch architecture with unity speedup. A recently proposed Recursive Fair Stochastic Matrix Decomposition algorithm used to compute near-perfect transmission schedules for each IP router. The IPTV traffic is shaped at the sources using Application-Specific Token Bucker Traffic Shapers, to limit the burstiness of incoming network traffic. The IPTV traffic is shaped at the destinations using Application-Specific Playback Queues, to remove residual network jitter and reconstruct the original bursty IPTV video streams at each destination. All IPTV traffic flows are regenerated at the destinations with essentially zero delay jitter and essentially-perfect QoS. The destination nodes deliver the IPTV streams to the ultimate end users using the same IPTV multicast system over a regional Metropolitan Area Network. It is shown that all IPTV traffic is delivered with essentially-perfect end-to-end QoS, with deterministic bounds on the maximum delay and jitter on each video frame. Detailed simulations of an IPTV distribution system, multicasting several hundred high-definition IPTV video streams over several essentially saturated IP backbone networks are presented.

A Grooming Nodes Optimal Allocation Method for Multicast in WDM Networks

Directory of Open Access Journals (Sweden)

Chengying Wei

2016-01-01

Full Text Available The grooming node has the capability of grooming multicast traffic with the small granularity into established light at high cost of complexity and node architecture. In the paper, a grooming nodes optimal allocation (GNOA method is proposed to optimize the allocation of the grooming nodes constraint by the blocking probability for multicast traffic in sparse WDM networks. In the proposed GNOA method, the location of each grooming node is determined by the SCLD strategy. The improved smallest cost largest degree (SCLD strategy is designed to select the nongrooming nodes in the proposed GNOA method. The simulation results show that the proposed GNOA method can reduce the required number of grooming nodes and decrease the cost of constructing a network to guarantee a certain request blocking probability when the wavelengths per fiber and transmitter/receiver ports per node are sufficient for the optical multicast in WDM networks.

Proposal for tutorial: Resilience in carrier Ethernet transport

DEFF Research Database (Denmark)

Berger, Michael Stübert; Wessing, Henrik; Ruepp, Sarah Renée

2009-01-01

This tutorial addresses how Carrier Ethernet technologies can be used in the transport network to provide resilience to the packet layer. Carrier Ethernet networks based on PBB-TE and T-MPLS/MPLS-TP are strong candidates for reliable transport of triple-play services. These technologies offer...... of enhancements are still required to make Carrier Ethernet ready for large scale deployments of reliable point-to-multipoint services. The tutorial highlights the necessary enhancements and shows possible solutions and directions towards reliable multicast. Explicit focus is on OAM for multicast, where...

Multicast backup reprovisioning problem for Hamiltonian cycle-based protection on WDM networks

Science.gov (United States)

Din, Der-Rong; Huang, Jen-Shen

2014-03-01

As networks grow in size and complexity, the chance and the impact of failures increase dramatically. The pre-allocated backup resources cannot provide 100% protection guarantee when continuous failures occur in a network. In this paper, the multicast backup re-provisioning problem (MBRP) for Hamiltonian cycle (HC)-based protection on WDM networks for the link-failure case is studied. We focus on how to recover the protecting capabilities of Hamiltonian cycle against the subsequent link-failures on WDM networks for multicast transmissions, after recovering the multicast trees affected by the previous link-failure. Since this problem is a hard problem, an algorithm, which consists of several heuristics and a genetic algorithm (GA), is proposed to solve it. The simulation results of the proposed method are also given. Experimental results indicate that the proposed algorithm can solve this problem efficiently.

MDP: Reliable File Transfer for Space Missions

Science.gov (United States)

Rash, James; Criscuolo, Ed; Hogie, Keith; Parise, Ron; Hennessy, Joseph F. (Technical Monitor)

2002-01-01

This paper presents work being done at NASA/GSFC by the Operating Missions as Nodes on the Internet (OMNI) project to demonstrate the application of the Multicast Dissemination Protocol (MDP) to space missions to reliably transfer files. This work builds on previous work by the OMNI project to apply Internet communication technologies to space communication. The goal of this effort is to provide an inexpensive, reliable, standard, and interoperable mechanism for transferring files in the space communication environment. Limited bandwidth, noise, delay, intermittent connectivity, link asymmetry, and one-way links are all possible issues for space missions. Although these are link-layer issues, they can have a profound effect on the performance of transport and application level protocols. MDP, a UDP-based reliable file transfer protocol, was designed for multicast environments which have to address these same issues, and it has done so successfully. Developed by the Naval Research Lab in the mid 1990's, MDP is now in daily use by both the US Post Office and the DoD. This paper describes the use of MDP to provide automated end-to-end data flow for space missions. It examines the results of a parametric study of MDP in a simulated space link environment and discusses the results in terms of their implications for space missions. Lessons learned are addressed, which suggest minor enhancements to the MDP user interface to add specific features for space mission requirements, such as dynamic control of data rate, and a checkpoint/resume capability. These are features that are provided for in the protocol, but are not implemented in the sample MDP application that was provided. A brief look is also taken at the status of standardization. A version of MDP known as NORM (Neck Oriented Reliable Multicast) is in the process of becoming an IETF standard.

Providing resilience for carrier ethernet multicast traffic

DEFF Research Database (Denmark)

Ruepp, Sarah Renée; Wessing, Henrik; Zhang, Jiang

2009-01-01

This paper presents an overview of the Carrier Ethernet technology with specific focus on resilience. In particular, we detail how multicast traffic, which is essential for e.g. IPTV can be protected. We present Carrier Ethernet resilience methods for linear and ring networks and show by simulation...

An Improved MOEA/D for QoS Oriented Multimedia Multicasting with Network Coding

Directory of Open Access Journals (Sweden)

Zhaoyuan Wang

2015-08-01

Full Text Available Recent years witness a significant growth in multimedia applications. Among them, a stream of applications is real-time and requires one-to-many fast data transmission with stringent quality-of-service (QoS requirements, where multicast is an important supporting technology. In particular, with more and more mobile end users requesting real-time broadband multimedia applications, it is of vital importance to provide them with satisfied quality of experience. As network coding can offer higher bandwidth to users and accommodate more flows for networks than traditional routing, this paper studies the multicast routing problem with network coding and formulates it as a multi-objective optimization problem. As delay and packet loss ratio (PLR are two important performance indicators for QoS, we consider them as the two objectives for minimization. To address the problem above, we present a multi-objective evolutionary algorithm based on decomposition (MOEA/D, where an all population updating rule is devised to address the problem of lacking feasible solutions in the search space. Experimental results demonstrate the effectiveness of the proposed algorithm and it outperforms a number of state-of-the-art algorithms.

On-Chip SDM Switching for Unicast, Multicast and Traffic Grooming in Data Center Networks

DEFF Research Database (Denmark)

Kamchevska, Valerija; Ding, Yunhong; Dalgaard, Kjeld

2017-01-01

This paper reports on the use of a novel photonic integrated circuit that facilitates multicast and grooming in an optical data center architecture. The circuit allows for on-chip spatial multiplexing and demultiplexing as well as fiber core switching. Using this device, we experimentally verify...... that multicast and/or grooming can be successfully performed along the full range of output ports, for different group size and different power ratio. Moreover, we experimentally demonstrate SDM transmission and 5 Tbit/s switching using the on-chip fiber switch with integrated fan-in/fan-out devices and achieve...... errorfree performance (BER≤10-9) for a network scenario including simultaneous unicast/multicast switching and traffic grooming....

Hybrid ARQ Scheme with Autonomous Retransmission for Multicasting in Wireless Sensor Networks.

Science.gov (United States)

Jung, Young-Ho; Choi, Jihoon

2017-02-25

A new hybrid automatic repeat request (HARQ) scheme for multicast service for wireless sensor networks is proposed in this study. In the proposed algorithm, the HARQ operation is combined with an autonomous retransmission method that ensure a data packet is transmitted irrespective of whether or not the packet is successfully decoded at the receivers. The optimal number of autonomous retransmissions is determined to ensure maximum spectral efficiency, and a practical method that adjusts the number of autonomous retransmissions for realistic conditions is developed. Simulation results show that the proposed method achieves higher spectral efficiency than existing HARQ techniques.

Hybrid ARQ Scheme with Autonomous Retransmission for Multicasting in Wireless Sensor Networks

Directory of Open Access Journals (Sweden)

Young-Ho Jung

2017-02-01

Full Text Available A new hybrid automatic repeat request (HARQ scheme for multicast service for wireless sensor networks is proposed in this study. In the proposed algorithm, the HARQ operation is combined with an autonomous retransmission method that ensure a data packet is transmitted irrespective of whether or not the packet is successfully decoded at the receivers. The optimal number of autonomous retransmissions is determined to ensure maximum spectral efficiency, and a practical method that adjusts the number of autonomous retransmissions for realistic conditions is developed. Simulation results show that the proposed method achieves higher spectral efficiency than existing HARQ techniques.

Energy-efficient multicast traffic grooming strategy based on light-tree splitting for elastic optical networks

Science.gov (United States)

Liu, Huanlin; Yin, Yarui; Chen, Yong

2017-07-01

In order to address the problem of optimizing the spectrum resources and power consumption in elastic optical networks (EONs), we investigate the potential gains by jointly employing the light-tree splitting and traffic grooming for multicast requests. An energy-efficient multicast traffic grooming strategy based on light-tree splitting (EED-MTGS-LS) is proposed in this paper. Firstly, we design a traffic pre-processing mechanism to decide the multicast requests' routing order, which considers the request's bandwidth requirement and physical hops synthetically. Then, by dividing a light-tree to some sub-light-trees and grooming the request to these sub-light-trees, the light-tree sharing ratios of multicast requests can be improved. What's more, a priority scheduling vector is constructed, which aims to improve the success rate of spectrum assignment for grooming requests. Finally, a grooming strategy is designed to optimize the total power consumption by reducing the use of transponders and IP routers during routing. Simulation results show that the proposed strategy can significantly improve the spectrum utilization and save the power consumption.

Fingerprint multicast in secure video streaming.

Science.gov (United States)

Zhao, H Vicky; Liu, K J Ray

2006-01-01

Digital fingerprinting is an emerging technology to protect multimedia content from illegal redistribution, where each distributed copy is labeled with unique identification information. In video streaming, huge amount of data have to be transmitted to a large number of users under stringent latency constraints, so the bandwidth-efficient distribution of uniquely fingerprinted copies is crucial. This paper investigates the secure multicast of anticollusion fingerprinted video in streaming applications and analyzes their performance. We first propose a general fingerprint multicast scheme that can be used with most spread spectrum embedding-based multimedia fingerprinting systems. To further improve the bandwidth efficiency, we explore the special structure of the fingerprint design and propose a joint fingerprint design and distribution scheme. From our simulations, the two proposed schemes can reduce the bandwidth requirement by 48% to 87%, depending on the number of users, the characteristics of video sequences, and the network and computation constraints. We also show that under the constraint that all colluders have the same probability of detection, the embedded fingerprints in the two schemes have approximately the same collusion resistance. Finally, we propose a fingerprint drift compensation scheme to improve the quality of the reconstructed sequences at the decoder's side without introducing extra communication overhead.

Adaptive live multicast video streaming of SVC with UEP FEC

Science.gov (United States)

Lev, Avram; Lasry, Amir; Loants, Maoz; Hadar, Ofer

2014-09-01

Ideally, video streaming systems should provide the best quality video a user's device can handle without compromising on downloading speed. In this article, an improved video transmission system is presented which dynamically enhances the video quality based on a user's current network state and repairs errors from data lost in the video transmission. The system incorporates three main components: Scalable Video Coding (SVC) with three layers, multicast based on Receiver Layered Multicast (RLM) and an UnEqual Forward Error Correction (FEC) algorithm. The SVC provides an efficient method for providing different levels of video quality, stored as enhancement layers. In the presented system, a proportional-integral-derivative (PID) controller was implemented to dynamically adjust the video quality, adding or subtracting quality layers as appropriate. In addition, an FEC algorithm was added to compensate for data lost in transmission. A two dimensional FEC was used. The FEC algorithm came from the Pro MPEG code of practice #3 release 2. Several bit errors scenarios were tested (step function, cosine wave) with different bandwidth size and error values were simulated. The suggested scheme which includes SVC video encoding with 3 layers over IP Multicast with Unequal FEC algorithm was investigated under different channel conditions, variable bandwidths and different bit error rates. The results indicate improvement of the video quality in terms of PSNR over previous transmission schemes.

Enhancing On-Demand Multicast Routing Protocols using Mobility Prediction in Mobile Ad-hoc Network

Directory of Open Access Journals (Sweden)

Nermin Makhlouf

2014-08-01

Full Text Available A Mobile Ad hoc Network (MANET is a self-organizing wireless communication network in which mobile devices are based on no infrastructure like base stations or access points. Minimal configuration and quick deployment make ad hoc networks suitable for emergency situations like disaster recovery or military conflict. Since node mobility may cause links to be broken frequently, a very important issue for routing in MANETs is how to set reliable paths which can last as long as possible. To solve this problem, non-random behaviors for the mobility patterns that mobile users exhibit are exploited. This paper introduces a scheme to improve On-Demand Multicast Routing Protocol (ODMRP performances by using mobility prediction. 

Wavelength conversion, time demultiplexing and multicasting based on cross-phase modulation and four-wave mixing in dispersion-flattened highly nonlinear photonic crystal fiber

International Nuclear Information System (INIS)

Hui, Zhan-Qiang; Zhang, Jian-Guo

2012-01-01

We propose the use of cross-phase modulation (XPM) and four-wave mixing (FWM) in dispersion-flattened highly nonlinear photonic crystal fibers (HNL-PCFs) to implement the functionalities of wavelength conversion, simultaneous time demultiplexing and wavelength multicasting in optical time-division multiplexing (OTDM) systems. The experiments on wavelength conversion at 80 Gbit s −1 and OTDM demultiplexing from 80 to 10 Gbit s −1 with wavelength multicasting of two channels are successfully demonstrated to validate the proposed scheme, which are carried out by using two segments of dispersion-flattened HNL-PCFs with lengths of 100 and 50 m, respectively. Moreover, the bit error rate (BER) performance is also measured. The results show that our designed system can achieve a power penalty of less than 4.6 dB for two multicasting channels with a 24 nm wavelength span at the BER of 10 −9 when compared with the 10 Gbit/s back-to-back measurement. The proposed system is transparent to bit rate since only an ultrafast third-order nonlinear effect is used. The resulting configuration is compact, robust and reliable, benefiting from the use of dispersion-flattened HNL-PCFs with short lengths. This also makes the proposed system more flexible in the operational wavelengths than those based on dispersion-shifted fibers and traditional highly nonlinear fibers. (paper)

Utilizing joint routing and capacity assignment algorithms to achieve inter- and intra-group delay fairness in multi-rate multicast wireless sensor networks.

Science.gov (United States)

Lin, Frank Yeong-Sung; Hsiao, Chiu-Han; Lin, Leo Shih-Chang; Wen, Yean-Fu

2013-03-14

Recent advance in wireless sensor network (WSN) applications such as the Internet of Things (IoT) have attracted a lot of attention. Sensor nodes have to monitor and cooperatively pass their data, such as temperature, sound, pressure, etc. through the network under constrained physical or environmental conditions. The Quality of Service (QoS) is very sensitive to network delays. When resources are constrained and when the number of receivers increases rapidly, how the sensor network can provide good QoS (measured as end-to-end delay) becomes a very critical problem. In this paper; a solution to the wireless sensor network multicasting problem is proposed in which a mathematical model that provides services to accommodate delay fairness for each subscriber is constructed. Granting equal consideration to both network link capacity assignment and routing strategies for each multicast group guarantees the intra-group and inter-group delay fairness of end-to-end delay. Minimizing delay and achieving fairness is ultimately achieved through the Lagrangean Relaxation method and Subgradient Optimization Technique. Test results indicate that the new system runs with greater effectiveness and efficiency.

SOME NOTES ON COST ALLOCATION IN MULTICASTING

Directory of Open Access Journals (Sweden)

Darko Skorin-Kapov

2012-12-01

Full Text Available We analyze the cost allocation strategies with the problef of broadcasting information from some source to a number of communication network users. A multicast routing chooses a minimum cost tree network that spans the source and all the receivers. The cost of such a network is distributed among its receivers who may be individuals or organizations with possibly conflicting interests. Providing network developers, users and owners with practical computable 'fair' cost allocation solution procedures is of great importance for network mamagement. Consequently, this multidisciplinary problem was extensively studied by Operational Researchers, Economists, Mathematicians and Computer Scientists. The fairness of various proposed solutions was even argued in US courts. This presentation overviews some previously published, as well as some recent results, in the development of algorithmic mechanisms to efficiently compute 'attractive' cost allocation solutions for multicast networks. Specifically, we will analyze cooperative game theory based cost allocation models that avoid cross subsidies and/or are distance and population monotonic. We will also present some related open cost allocation problems and the potential contribution that such models might make to this problem in the future.

Cooperative relay-based multicasting for energy and delay minimization

KAUST Repository

Atat, Rachad; Yaacoub, Elias E.; Alouini, Mohamed-Slim; Abu-Dayya, Adnan A.

2012-01-01

mobiles. Two schemes are investigated. The first consists of the BS sending the data only to the relay, and the second scheme considers the scenario of threshold-based multicasting by the BS, where a relay is selected to transmit the data to the mobiles

One-to-six WDM multicasting of DPSK signals based on dual-pump four-wave mixing in a silicon waveguide

DEFF Research Database (Denmark)

Pu, Minhao; Hu, Hao; Ji, Hua

2011-01-01

We present WDM multicasting based on dual-pump four-wave mixing in a 3-mm long dispersion engineered silicon waveguide. One-to-six phase-preserving WDM multicasting of 10-Gb/s differential phase-shiftkeying (DPSK) data is experimentally demonstrated with bit-error rate measurements. All the six...

Analysis of Blocking Rate and Bandwidth Usage of Mobile IPTV Services in Wireless Cellular Networks

Directory of Open Access Journals (Sweden)

Mingfu Li

2014-01-01

Full Text Available Mobile IPTV services over wireless cellular networks become more and more popular, owing to the significant growth in access bandwidth of wireless cellular networks such as 3G/4G and WiMAX. However, the spectrum resources of wireless cellular networks is rare. How to enhance the spectral efficiency of mobile networks becomes an important issue. Unicast, broadcast, and multicast are the most important transport schemes for offering mobile IPTV services over wireless cellular networks. Therefore, bandwidth usages and blocking rates of unicast, broadcast, and multicast IPTV services were analyzed and compared in this paper. Simulations were also conducted to validate the analytical results. Numerical results demonstrate that the presented analysis is correct, and multicast scheme achieves the best bandwidth usage and blocking rate performance, relative to the other two schemes.

Analysis of blocking rate and bandwidth usage of mobile IPTV services in wireless cellular networks.

Science.gov (United States)

Li, Mingfu

2014-01-01

Mobile IPTV services over wireless cellular networks become more and more popular, owing to the significant growth in access bandwidth of wireless cellular networks such as 3G/4G and WiMAX. However, the spectrum resources of wireless cellular networks is rare. How to enhance the spectral efficiency of mobile networks becomes an important issue. Unicast, broadcast, and multicast are the most important transport schemes for offering mobile IPTV services over wireless cellular networks. Therefore, bandwidth usages and blocking rates of unicast, broadcast, and multicast IPTV services were analyzed and compared in this paper. Simulations were also conducted to validate the analytical results. Numerical results demonstrate that the presented analysis is correct, and multicast scheme achieves the best bandwidth usage and blocking rate performance, relative to the other two schemes.

Utilizing Joint Routing and Capacity Assignment Algorithms to Achieve Inter- and Intra-Group Delay Fairness in Multi-Rate Multicast Wireless Sensor Networks

Directory of Open Access Journals (Sweden)

Yean-Fu Wen

2013-03-01

Full Text Available Recent advance in wireless sensor network (WSN applications such as the Internet of Things (IoT have attracted a lot of attention. Sensor nodes have to monitor and cooperatively pass their data, such as temperature, sound, pressure, etc. through the network under constrained physical or environmental conditions. The Quality of Service (QoS is very sensitive to network delays. When resources are constrained and when the number of receivers increases rapidly, how the sensor network can provide good QoS (measured as end-to-end delay becomes a very critical problem. In this paper; a solution to the wireless sensor network multicasting problem is proposed in which a mathematical model that provides services to accommodate delay fairness for each subscriber is constructed. Granting equal consideration to both network link capacity assignment and routing strategies for each multicast group guarantees the intra-group and inter-group delay fairness of end-to-end delay. Minimizing delay and achieving fairness is ultimately achieved through the Lagrangean Relaxation method and Subgradient Optimization Technique. Test results indicate that the new system runs with greater effectiveness and efficiency.

Tunable Photonic RF Generator for Dynamic Allocation and Multicast of 1.25 Gbps Channels in the 60 GHz Unlicensed Band

DEFF Research Database (Denmark)

Lebedev, Alexander; Pang, Xiaodan; Vegas Olmos, Juan José

2013-01-01

) or in the central office (CO). At the RN, we perform the replication of the original channel suitable for closely spaced multicast applications such as high definition (HD) video delivery where RN serves as a photonic radio frequency (RF) generator for both channel allocation and multicast. Experimental...

Social-Aware Relay Selection for Cooperative Multicast Device-to-Device Communications

Directory of Open Access Journals (Sweden)

Francesco Chiti

2017-12-01

Full Text Available The increasing use of social networks such as Facebook, Twitter, and Instagram to share photos, video streaming, and music among friends has generated a huge increase in the amount of data traffic over wireless networks. This social behavior has triggered new communication paradigms such as device-to-device (D2D and relaying communication schemes, which are both considered as strong drivers for the next fifth-generation (5G cellular systems. Recently, the social-aware layer and its relationship to and influence on the physical communications layer have gained great attention as emerging focus points. We focus here on the case of relaying communications to pursue the multicast data dissemination to a group of users forming a social community through a relay node, according to the extension of the D2D mode to the case of device-to-many devices. Moreover, in our case, the source selects the device to act as the relay among different users of the multicast group by taking into account both the propagation link conditions and the relay social-trust level with the constraint of minimizing the end-to-end content delivery delay. An optimization procedure is also proposed in order to achieve the best performance. Finally, numerical results are provided to highlight the advantages of considering the impact of social level on the end-to-end delivery delay in the integrated social–physical network in comparison with the classical relay-assisted multicast communications for which the relay social-trust level is not considered.

Ruteo multicast mediante algoritmos genéticos

OpenAIRE

Klenzi, Raúl O.; Sánchez Tores, Héctor A.; Ortega, Manuel Oscar; Naranjo, Viviana; Espósito, Gabriela

2000-01-01

Los sistemas o redes de comunicación construidos teniendo en cuenta el modelo de referencia OSI (Open Systems lnterconection) o la arquitectura de Internet, fueron diseñados para soportar servicios o comunicaciones punto a punto, donde la información fluye entre dos usuarios únicamente. Uno de los tópicos en el cual las redes de computadoras actuales están poniendo mucho énfasis, proviene de las aplicaciones multicast o de grupo. Estas involucran más de dos usuarios (estos usuarios definen...

All-optical broadcast and multicast technologies based on PPLN waveguide

DEFF Research Database (Denmark)

Ye, Lingyun; Wang, Ju; Hu, Hao

2013-01-01

All-optical 1×4 broadcast and 1×3 multicast experiments of a 40-Gb/s return-to-zero on-off keying (RZ-OOK) signal based on a periodically poled lithium niobate (PPLN) waveguide are demonstrated in this letter. Clear opened eye diagrams and error-free performance are achieved for the broadcast...

Hybrid digital-analog video transmission in wireless multicast and multiple-input multiple-output system

Science.gov (United States)

Liu, Yu; Lin, Xiaocheng; Fan, Nianfei; Zhang, Lin

2016-01-01

Wireless video multicast has become one of the key technologies in wireless applications. But the main challenge of conventional wireless video multicast, i.e., the cliff effect, remains unsolved. To overcome the cliff effect, a hybrid digital-analog (HDA) video transmission framework based on SoftCast, which transmits the digital bitstream with the quantization residuals, is proposed. With an effective power allocation algorithm and appropriate parameter settings, the residual gains can be maximized; meanwhile, the digital bitstream can assure transmission of a basic video to the multicast receiver group. In the multiple-input multiple-output (MIMO) system, since nonuniform noise interference on different antennas can be regarded as the cliff effect problem, ParCast, which is a variation of SoftCast, is also applied to video transmission to solve it. The HDA scheme with corresponding power allocation algorithms is also applied to improve video performance. Simulations show that the proposed HDA scheme can overcome the cliff effect completely with the transmission of residuals. What is more, it outperforms the compared WSVC scheme by more than 2 dB when transmitting under the same bandwidth, and it can further improve performance by nearly 8 dB in MIMO when compared with the ParCast scheme.

Service validity and service reliability of search, experience and credence services. A scenario study

NARCIS (Netherlands)

Galetzka, Mirjam; Verhoeven, J.W.M.; Pruyn, Adriaan T.H.

2006-01-01

The purpose of this research is to add to our understanding of the antecedents of customer satisfaction by examining the effects of service reliability (Is the service “correctly” produced?) and service validity (Is the “correct” service produced?) of search, experience and credence services.

Reliability Engineering for Service Oriented Architectures

Science.gov (United States)

2013-02-01

Common Object Request Broker Architecture Ecosystem In software , an ecosystem is a set of applications and/or services that grad- ually build up over time...Enterprise Service Bus Foreign In an SOA context: Any SOA, service or software which the owners of the calling software do not have control of, either...SOA Service Oriented Architecture SRE Software Reliability Engineering System Mode Many systems exhibit different modes of operation. E.g. the cockpit

Data reliability in home healthcare services

NARCIS (Netherlands)

Vavilis, S.; Zannone, N.; Petkovic, M.

2013-01-01

Home healthcare services are emerging as a new frontier in healthcare practices. Data reliability, however, is crucial for the acceptance of these new services. This work presents a semi-automated system to evaluate the quality of medical measurements taken by patients. The system relies on data

Optimal Caching in Multicast 5G Networks with Opportunistic Spectrum Access

KAUST Repository

Emara, Mostafa

2018-01-15

Cache-enabled small base station (SBS) densification is foreseen as a key component of 5G cellular networks. This architecture enables storing popular files at the network edge (i.e., SBS caches), which empowers local communication and alleviates traffic congestions at the core/backhaul network. This paper develops a mathematical framework, based on stochastic geometry, to characterize the hit probability of a cache-enabled multicast 5G network with SBS multi-channel capabilities and opportunistic spectrum access. To this end, we first derive the hit probability by characterizing opportunistic spectrum access success probabilities, service distance distributions, and coverage probabilities. The optimal caching distribution to maximize the hit probability is then computed. The performance and trade-offs of the derived optimal caching distributions are then assessed and compared with two widely employed caching distribution schemes, namely uniform and Zipf caching, through numerical results and extensive simulations. It is shown that the Zipf caching almost optimal only in scenarios with large number of available channels and large cache sizes.

Experimental Evaluation of Unicast and Multicast CoAP Group Communication

Directory of Open Access Journals (Sweden)

Isam Ishaq

2016-07-01

Full Text Available The Internet of Things (IoT is expanding rapidly to new domains in which embedded devices play a key role and gradually outnumber traditionally-connected devices. These devices are often constrained in their resources and are thus unable to run standard Internet protocols. The Constrained Application Protocol (CoAP is a new alternative standard protocol that implements the same principals as the Hypertext Transfer Protocol (HTTP, but is tailored towards constrained devices. In many IoT application domains, devices need to be addressed in groups in addition to being addressable individually. Two main approaches are currently being proposed in the IoT community for CoAP-based group communication. The main difference between the two approaches lies in the underlying communication type: multicast versus unicast. In this article, we experimentally evaluate those two approaches using two wireless sensor testbeds and under different test conditions. We highlight the pros and cons of each of them and propose combining these approaches in a hybrid solution to better suit certain use case requirements. Additionally, we provide a solution for multicast-based group membership management using CoAP.

Multicast Delayed Authentication For Streaming Synchrophasor Data in the Smart Grid.

Science.gov (United States)

Câmara, Sérgio; Anand, Dhananjay; Pillitteri, Victoria; Carmo, Luiz

2016-01-01

Multicast authentication of synchrophasor data is challenging due to the design requirements of Smart Grid monitoring systems such as low security overhead, tolerance of lossy networks, time-criticality and high data rates. In this work, we propose inf -TESLA, Infinite Timed Efficient Stream Loss-tolerant Authentication, a multicast delayed authentication protocol for communication links used to stream synchrophasor data for wide area control of electric power networks. Our approach is based on the authentication protocol TESLA but is augmented to accommodate high frequency transmissions of unbounded length. inf TESLA protocol utilizes the Dual Offset Key Chains mechanism to reduce authentication delay and computational cost associated with key chain commitment. We provide a description of the mechanism using two different modes for disclosing keys and demonstrate its security against a man-in-the-middle attack attempt. We compare our approach against the TESLA protocol in a 2-day simulation scenario, showing a reduction of 15.82% and 47.29% in computational cost, sender and receiver respectively, and a cumulative reduction in the communication overhead.

Evaluación de ancho de banda en transmisiones multicast sparse mode implementadas en redes IPV6

OpenAIRE

Pineda Ancco, Ferdinand; Directora Asociada de Investigación, Universidad Peruana Unión. Lima; Cruz de la Cruz, José; Mamani Pari, David

2017-01-01

En el trabajo de investigación se describió el diseño e implementación del protocolo multicast de tipo Sparsemode con el objetivo de mejorar el tráfico de datos en redes que transporten información unidireccional. Eldiseño se realiza sobre una red que implementa IPV6 como protocolo de capa 3 del modelo de referencia OSI.Para validar el método, la evaluación del tráfico se realizó analizando el ancho de banda, retardos y cantidad debits enviados por el protocolo multicast Sparse mode cursado e...

Joint NC-ARQ and AMC for QoS-Guaranteed Mobile Multicast

DEFF Research Database (Denmark)

Toftegaard, Thomas Skjødeberg; Wang, Haibo; Schwefel, Hans-Peter

2010-01-01

the scalability problem of applying ARQ in multicast. Then we propose two joint NC-ARQ-AMC schemes, namely, the Average PER-based AMC (AvgPER-AMC) with Opt-ARQ and AvgPER-AMC with SubOpt-ARQ in a cross-layer design framework to maximize the average spectral efficiency per receiver under specific QoS constraints...

Network coding for multi-resolution multicast

DEFF Research Database (Denmark)

2013-01-01

A method, apparatus and computer program product for utilizing network coding for multi-resolution multicast is presented. A network source partitions source content into a base layer and one or more refinement layers. The network source receives a respective one or more push-back messages from one...... or more network destination receivers, the push-back messages identifying the one or more refinement layers suited for each one of the one or more network destination receivers. The network source computes a network code involving the base layer and the one or more refinement layers for at least one...... of the one or more network destination receivers, and transmits the network code to the one or more network destination receivers in accordance with the push-back messages....

Product quality, service reliability and management of operations at ...

African Journals Online (AJOL)

High product quality, service reliability, and management of operations are key factors in business growth and sustainability. Analyzing “The Starbucks Experience” is a pedagogical approach to reinforcing the concepts of control and management of quality, service reliability, and efficient operations in action. The objective ...

Resource management in energy-limited, bandwidth-limited, transceiver-limited wireless networks for session-based multicasting

National Research Council Canada - National Science Library

Wieselthier, Jeffrey E; Nguyen, Gam D; Ephremides, Anthony

2001-01-01

In this paper we consider source-initiated multicast session traffic in an ad hoc wireless network, operating under hard constraints on the available transmission energy as well as on bandwidth and transceiver resources...

Out-of-Sequence Prevention for Multicast Input-Queuing Space-Memory-Memory Clos-Network

DEFF Research Database (Denmark)

Yu, Hao; Ruepp, Sarah; Berger, Michael Stübert

2011-01-01

This paper proposes two cell dispatching algorithms for the input-queuing space-memory-memory (IQ-SMM) Closnetwork to reduce out-of-sequence (OOS) for multicast traffic. The frequent connection pattern change of DSRR results in a severe OOS problem. Based on the principle of DSRR, MFDSRR is able ...

Real-time video streaming system for LHD experiment using IP multicast

International Nuclear Information System (INIS)

Emoto, Masahiko; Yamamoto, Takashi; Yoshida, Masanobu; Nagayama, Yoshio; Hasegawa, Makoto

2009-01-01

In order to accomplish smooth cooperation research, remote participation plays an important role. For this purpose, the authors have been developing various applications for remote participation for the LHD (Large Helical Device) experiments, such as Web interface for visualization of acquired data. The video streaming system is one of them. It is useful to grasp the status of the ongoing experiment remotely, and we provide the video images displayed in the control room to the remote users. However, usual streaming servers cannot send video images without delay. The delay changes depending on how to send the images, but even a little delay might become critical if the researchers use the images to adjust the diagnostic devices. One of the main causes of delay is the procedure of compressing and decompressing the images. Furthermore, commonly used video compression method is lossy; it removes less important information to reduce the size. However, lossy images cannot be used for physical analysis because the original information is lost. Therefore, video images for remote participation should be sent without compression in order to minimize the delay and to supply high quality images durable for physical analysis. However, sending uncompressed video images requires large network bandwidth. For example, sending 5 frames of 16bit color SXGA images a second requires 100Mbps. Furthermore, the video images must be sent to several remote sites simultaneously. It is hard for a server PC to handle such a large data. To cope with this problem, the authors adopted IP multicast to send video images to several remote sites at once. Because IP multicast packets are sent only to the network on which the clients want the data; the load of the server does not depend on the number of clients and the network load is reduced. In this paper, the authors discuss the feasibility of high bandwidth video streaming system using IP multicast. (author)

MeshTree: A Delay optimised Overlay Multicast Tree Building Protocol

OpenAIRE

Tan, Su-Wei; Waters, A. Gill; Crawford, John

2005-01-01

We study decentralised low delay degree-constrained overlay multicast tree construction for single source real-time applications. This optimisation problem is NP-hard even if computed centrally. We identify two problems in traditional distributed solutions, namely the greedy problem and delay-cost trade-off. By offering solutions to these problems, we propose a new self-organising distributed tree building protocol called MeshTree. The main idea is to embed the delivery tree in a degree-bound...

Cyber security for greater service reliability

Energy Technology Data Exchange (ETDEWEB)

Vickery, P. [N-Dimension Solutions Inc., Richmond Hill, ON (Canada)

2008-05-15

Service reliability in the electricity transmission and distribution (T and D) industry is being challenged by increased equipment failures, harsher climatic conditions, and computer hackers who aim to disrupt services by gaining access to transmission and distribution resources. This article discussed methods of ensuring the cyber-security of T and D operators. Weak points in the T and D industry include remote terminal units; intelligent electronic devices; distributed control systems; programmable logic controllers; and various intelligent field devices. An increasing number of interconnection points exist between an operator's service control system and external systems. The North American Electric Reliability Council (NERC) standards specify that cyber security strategies should ensure that all cyber assets are protected, and that access points must be monitored to detect intrusion attempts. The introduction of new advanced metering initiatives must also be considered. Comprehensive monitoring systems should be available to support compliance with cyber security standards. It was concluded that senior management should commit to a periodic cyber security re-assessment program in order to keep up-to-date.

Evaluation of Different Power Saving Techniques for MBMS Services

Directory of Open Access Journals (Sweden)

Antonios Alexiou

2009-01-01

Full Text Available Over the last years we have witnessed an explosive growth of multimedia computing, wireless communication and applications. Following the rapid increase in penetration rate of broadband services, the Third Generation Partnership Project (3GPP is currently standardizing the Evolved-Multimedia Broadcast/Multicast Service (E-MBMS framework of Long Term Evolution (LTE, the successor of Universal Mobile Telecommunications System (UMTS. MBMS constitutes a point-to-multipoint downlink bearer service that was designed to significantly decrease the required radio and wired link resources. However, several obstacles regarding the high-power requirements should be overcome for the realization of MBMS. Techniques, such as Macrodiversity Combining and Rate Splitting, could be utilized to reduce the power requirement of delivering multicast traffic to MBMS users. In this paper, we analytically present several power saving techniques and analyze their performance in terms of power consumption. We provide simulation results that reveal the amount of power that is saved and reinforce the need for the usage of such techniques.

Architecture-Based Reliability Analysis of Web Services

Science.gov (United States)

Rahmani, Cobra Mariam

2012-01-01

In a Service Oriented Architecture (SOA), the hierarchical complexity of Web Services (WS) and their interactions with the underlying Application Server (AS) create new challenges in providing a realistic estimate of WS performance and reliability. The current approaches often treat the entire WS environment as a black-box. Thus, the sensitivity…

Flexible and re-configurable optical three-input XOR logic gate of phase-modulated signals with multicast functionality for potential application in optical physical-layer network coding.

Science.gov (United States)

Lu, Guo-Wei; Qin, Jun; Wang, Hongxiang; Ji, XuYuefeng; Sharif, Gazi Mohammad; Yamaguchi, Shigeru

2016-02-08

Optical logic gate, especially exclusive-or (XOR) gate, plays important role in accomplishing photonic computing and various network functionalities in future optical networks. On the other hand, optical multicast is another indispensable functionality to efficiently deliver information in optical networks. In this paper, for the first time, we propose and experimentally demonstrate a flexible optical three-input XOR gate scheme for multiple input phase-modulated signals with a 1-to-2 multicast functionality for each XOR operation using four-wave mixing (FWM) effect in single piece of highly-nonlinear fiber (HNLF). Through FWM in HNLF, all of the possible XOR operations among input signals could be simultaneously realized by sharing a single piece of HNLF. By selecting the obtained XOR components using a followed wavelength selective component, the number of XOR gates and the participant light in XOR operations could be flexibly configured. The re-configurability of the proposed XOR gate and the function integration of the optical logic gate and multicast in single device offer the flexibility in network design and improve the network efficiency. We experimentally demonstrate flexible 3-input XOR gate for four 10-Gbaud binary phase-shift keying signals with a multicast scale of 2. Error-free operations for the obtained XOR results are achieved. Potential application of the integrated XOR and multicast function in network coding is also discussed.

Energy-minimized design in all-optical networks using unicast/multicast traffic grooming

Science.gov (United States)

Puche, William S.; Amaya, Ferney O.; Sierra, Javier E.

2013-09-01

The increased bandwidth required by applications, tends to raise the amount of optical equipment, for this reason, it is essential to maintain a balance between the wavelength allocation, available capacity and number of optical devices to achieve the lowest power consumption. You could say that we propose a model that minimizes energy consumption, using unicast / multicast traffic grooming in optical networks.

Evaluación del punto de conmutación unicast- multicast para ahorro de potencia de transmisión en redes MBMS

Directory of Open Access Journals (Sweden)

Raúl Tamayo Fernández

2014-01-01

Full Text Available La oferta de aplicaciones y servicios multimedia para terminales móviles se hace principalmente a través de las redes celulares de tercera y cuarta generación (3G/4G existentes. El envío de los datos en este tipo de redes se realiza en modo unicast, es decir, a cada usuario se le dedican recursos de radio (ancho de banda y potencia de transmisión durante toda la sesión. Esto presenta algunos inconvenientes, tales como agotamiento rápido del ancho de banda del operador móvil, alto consumo de potencia de transmisión, incremento de la interferencia, y costos altos del servicio. Los operadores móviles requieren de nuevas tecnologías que optimicen el uso de sus recursos de radio y así lograr un mayor índice de penetración de los servicios. De ahí la necesidad de cambiar de paradigma hacia un modo de transmisión en multicast o broadcast, en el que una misma señal pueda recibirse por varios usuarios simultáneamente, de tal forma que los recursos de radio se puedan compartir. Para ello, la solución técnica sobre redes celulares LTE (Long Term Evolution se dio en la especificación 3GPP Release 6, llamada Servicio Multimedia por Broadcast/Multicast (MBMS, Multimedia Broadcast Multicast Service. La especificación de MBMS permite que una transmisión cambie de modo unicast a modo multicast a partir de un “punto de conmutación”, que determina el momento de hacer el cambio para obtener un ahorro tanto en ancho de banda como en potencia de transmisión. Este artículo presenta una evaluación para determinar los puntos de conmutación de modo de transmisión óptimos en el estándar MBMS para diferentes ambientes de propagación inalámbrica. Además, dado que MBMS se puede utilizar en topologías de Red de Frecuencia Única (SFN, Single Frequency Networks, que tienen la propiedad de “ganancia de red”, también se determina el ahorro de potencia de transmisión adicional que se obtiene en esta configuración.

Tunable Sparse Network Coding for Multicast Networks

DEFF Research Database (Denmark)

Feizi, Soheil; Roetter, Daniel Enrique Lucani; Sørensen, Chres Wiant

2014-01-01

This paper shows the potential and key enabling mechanisms for tunable sparse network coding, a scheme in which the density of network coded packets varies during a transmission session. At the beginning of a transmission session, sparsely coded packets are transmitted, which benefits decoding...... complexity. At the end of a transmission, when receivers have accumulated degrees of freedom, coding density is increased. We propose a family of tunable sparse network codes (TSNCs) for multicast erasure networks with a controllable trade-off between completion time performance to decoding complexity...... a mechanism to perform efficient Gaussian elimination over sparse matrices going beyond belief propagation but maintaining low decoding complexity. Supporting simulation results are provided showing the trade-off between decoding complexity and completion time....

RSAM: An enhanced architecture for achieving web services reliability in mobile cloud computing

Directory of Open Access Journals (Sweden)

Amr S. Abdelfattah

2018-04-01

Full Text Available The evolution of the mobile landscape is coupled with the ubiquitous nature of the internet with its intermittent wireless connectivity and the web services. Achieving the web service reliability results in low communication overhead and retrieving the appropriate response. The middleware approach (MA is highly tended to achieve the web service reliability. This paper proposes a Reliable Service Architecture using Middleware (RSAM that achieves the reliable web services consumption. The enhanced architecture focuses on ensuring and tracking the request execution under the communication limitations and service temporal unavailability. It considers the most measurement factors including: request size, response size, and consuming time. We conducted experiments to compare the enhanced architecture with the traditional one. In these experiments, we covered several cases to prove the achievement of reliability. Results also show that the request size was found to be constant, the response size is identical to the traditional architecture, and the increase in the consuming time was less than 5% of the transaction time with the different response sizes. Keywords: Reliable web service, Middleware architecture, Mobile cloud computing

Integer-linear-programing optimization in scalable video multicast with adaptive modulation and coding in wireless networks.

Science.gov (United States)

Lee, Dongyul; Lee, Chaewoo

2014-01-01

The advancement in wideband wireless network supports real time services such as IPTV and live video streaming. However, because of the sharing nature of the wireless medium, efficient resource allocation has been studied to achieve a high level of acceptability and proliferation of wireless multimedia. Scalable video coding (SVC) with adaptive modulation and coding (AMC) provides an excellent solution for wireless video streaming. By assigning different modulation and coding schemes (MCSs) to video layers, SVC can provide good video quality to users in good channel conditions and also basic video quality to users in bad channel conditions. For optimal resource allocation, a key issue in applying SVC in the wireless multicast service is how to assign MCSs and the time resources to each SVC layer in the heterogeneous channel condition. We formulate this problem with integer linear programming (ILP) and provide numerical results to show the performance under 802.16 m environment. The result shows that our methodology enhances the overall system throughput compared to an existing algorithm.

Integer-Linear-Programing Optimization in Scalable Video Multicast with Adaptive Modulation and Coding in Wireless Networks

Directory of Open Access Journals (Sweden)

Dongyul Lee

2014-01-01

Full Text Available The advancement in wideband wireless network supports real time services such as IPTV and live video streaming. However, because of the sharing nature of the wireless medium, efficient resource allocation has been studied to achieve a high level of acceptability and proliferation of wireless multimedia. Scalable video coding (SVC with adaptive modulation and coding (AMC provides an excellent solution for wireless video streaming. By assigning different modulation and coding schemes (MCSs to video layers, SVC can provide good video quality to users in good channel conditions and also basic video quality to users in bad channel conditions. For optimal resource allocation, a key issue in applying SVC in the wireless multicast service is how to assign MCSs and the time resources to each SVC layer in the heterogeneous channel condition. We formulate this problem with integer linear programming (ILP and provide numerical results to show the performance under 802.16 m environment. The result shows that our methodology enhances the overall system throughput compared to an existing algorithm.

Health Service Quality Scale: Brazilian Portuguese translation, reliability and validity.

Science.gov (United States)

Rocha, Luiz Roberto Martins; Veiga, Daniela Francescato; e Oliveira, Paulo Rocha; Song, Elaine Horibe; Ferreira, Lydia Masako

2013-01-17

The Health Service Quality Scale is a multidimensional hierarchical scale that is based on interdisciplinary approach. This instrument was specifically created for measuring health service quality based on marketing and health care concepts. The aim of this study was to translate and culturally adapt the Health Service Quality Scale into Brazilian Portuguese and to assess the validity and reliability of the Brazilian Portuguese version of the instrument. We conducted a cross-sectional, observational study, with public health system patients in a Brazilian university hospital. Validity was assessed using Pearson's correlation coefficient to measure the strength of the association between the Brazilian Portuguese version of the instrument and the SERVQUAL scale. Internal consistency was evaluated using Cronbach's alpha coefficient; the intraclass (ICC) and Pearson's correlation coefficients were used for test-retest reliability. One hundred and sixteen consecutive postoperative patients completed the questionnaire. Pearson's correlation coefficient for validity was 0.20. Cronbach's alpha for the first and second administrations of the final version of the instrument were 0.982 and 0.986, respectively. For test-retest reliability, Pearson's correlation coefficient was 0.89 and ICC was 0.90. The culturally adapted, Brazilian Portuguese version of the Health Service Quality Scale is a valid and reliable instrument to measure health service quality.

Error Control Techniques for Efficient Multicast Streaming in UMTS Networks: Proposals andPerformance Evaluation

Directory of Open Access Journals (Sweden)

Michele Rossi

2004-06-01

Full Text Available In this paper we introduce techniques for efficient multicast video streaming in UMTS networks where a video content has to be conveyed to multiple users in the same cell. Efficient multicast data delivery in UMTS is still an open issue. In particular, suitable solutions have to be found to cope with wireless channel errors, while maintaining both an acceptable channel utilization and a controlled delivery delay over the wireless link between the serving base station and the mobile terminals. Here, we first highlight that standard solutions such as unequal error protection (UEP of the video flow are ineffective in the UMTS systems due to its inherent large feedback delay at the link layer (Radio Link Control, RLC. Subsequently, we propose a local approach to solve errors directly at the UMTS link layer while keeping a reasonably high channel efficiency and saving, as much as possible, system resources. The solution that we propose in this paper is based on the usage of the common channel to serve all the interested users in a cell. In this way, we can save resources with respect to the case where multiple dedicated channels are allocated for every user. In addition to that, we present a hybrid ARQ (HARQ proactive protocol that, at the cost of some redundancy (added to the link layer flow, is able to consistently improve the channel efficiency with respect to the plain ARQ case, by therefore making the use of a single common channel for multicast data delivery feasible. In the last part of the paper we give some hints for future research, by envisioning the usage of the aforementioned error control protocols with suitably encoded video streams.

Enhancing Experiment Central Service Reliability: from delivery to security and virtualization

CERN Document Server

Donno, Flavia; Buzykaev, Alexey; Saiz Santos, Maria Dolores

2011-01-01

The four LHC experiments rely on experiment specific services running on machines mainly located at CERN. Some of these services have been rated by the experiments as very critical: any loss or degradation of performance has a major impact on the experiment's production and analysis activities. It is therefore important to provide a reliable and robust operational environment. In this work we describe the strategy based on service deployment, security and virtualization adopted to enhance the reliability of ATLAS and CMS central services.

The MIM web gateway to IP multicast e-meetings

Science.gov (United States)

Parviainen, Roland; Parnes, Peter

2003-12-01

As video conferencing and e-meeting systems are used more and more on the Internet and in businesses it becomes increasingly important to be able to participate from any computer at any location. Often this is impossible, since these systems requires often special software that are not available everywhere or impossible to install for administrative reasons. Many locations also lack the necessary network infrastructure such as IP multicast. This paper presents a WWW gateway system that enables users to participate using only a standard web browser. The design and architecture of the system are described and performance tests that show the scalability of the system are also presented.

Health service quality scale: Brazilian Portuguese translation, reliability and validity

Science.gov (United States)

2013-01-01

Background The Health Service Quality Scale is a multidimensional hierarchical scale that is based on interdisciplinary approach. This instrument was specifically created for measuring health service quality based on marketing and health care concepts. The aim of this study was to translate and culturally adapt the Health Service Quality Scale into Brazilian Portuguese and to assess the validity and reliability of the Brazilian Portuguese version of the instrument. Methods We conducted a cross-sectional, observational study, with public health system patients in a Brazilian university hospital. Validity was assessed using Pearson’s correlation coefficient to measure the strength of the association between the Brazilian Portuguese version of the instrument and the SERVQUAL scale. Internal consistency was evaluated using Cronbach’s alpha coefficient; the intraclass (ICC) and Pearson’s correlation coefficients were used for test-retest reliability. Results One hundred and sixteen consecutive postoperative patients completed the questionnaire. Pearson’s correlation coefficient for validity was 0.20. Cronbach's alpha for the first and second administrations of the final version of the instrument were 0.982 and 0.986, respectively. For test-retest reliability, Pearson’s correlation coefficient was 0.89 and ICC was 0.90. Conclusions The culturally adapted, Brazilian Portuguese version of the Health Service Quality Scale is a valid and reliable instrument to measure health service quality. PMID:23327598

The impact of scheduling on service reliability : Trip-time determination and holding points in long-headway services

NARCIS (Netherlands)

Van Oort, N.; Boterman, J.W.; Van Nes, R.

2012-01-01

This paper presents research on optimizing service reliability of longheadway services in urban public transport. Setting the driving time, and thus the departure time at stops, is an important decision when optimizing reliability in urban public transport. The choice of the percentile out of

Novel approach for evaluation of service reliability for electricity customers

Institute of Scientific and Technical Information of China (English)

JIANG; John; N

2009-01-01

Understanding reliability value for electricity customer is important to market-based reliability management. This paper proposes a novel approach to evaluate the reliability for electricity customers by using indifference curve between economic compensation for power interruption and service reliability of electricity. Indifference curve is formed by calculating different planning schemes of network expansion for different reliability requirements of customers, which reveals the information about economic values for different reliability levels for electricity customers, so that the reliability based on market supply demand mechanism can be established and economic signals can be provided for reliability management and enhancement.

Reliability in individual monitoring service.

Science.gov (United States)

Mod Ali, N

2011-03-01

As a laboratory certified to ISO 9001:2008 and accredited to ISO/IEC 17025, the Secondary Standard Dosimetry Laboratory (SSDL)-Nuclear Malaysia has incorporated an overall comprehensive system for technical and quality management in promoting a reliable individual monitoring service (IMS). Faster identification and resolution of issues regarding dosemeter preparation and issuing of reports, personnel enhancement, improved customer satisfaction and overall efficiency of laboratory activities are all results of the implementation of an effective quality system. Review of these measures and responses to observed trends provide continuous improvement of the system. By having these mechanisms, reliability of the IMS can be assured in the promotion of safe behaviour at all levels of the workforce utilising ionising radiation facilities. Upgradation of in the reporting program through a web-based e-SSDL marks a major improvement in Nuclear Malaysia's IMS reliability on the whole. The system is a vital step in providing a user friendly and effective occupational exposure evaluation program in the country. It provides a higher level of confidence in the results generated for occupational dose monitoring of the IMS, thus, enhances the status of the radiation protection framework of the country.

Green Mobile Clouds: Network Coding and User Cooperation for Improved Energy Efficiency

DEFF Research Database (Denmark)

Heide, Janus; Fitzek, Frank; Pedersen, Morten Videbæk

2012-01-01

This paper highlights the benefits of user cooperation and network coding for energy saving in cellular networks. It is shown that these techniques allow for reliable and efficient multicast services from both a user and network perspective. The working principles and advantages in terms of energy...

The intergroup protocols: Scalable group communication for the internet

Energy Technology Data Exchange (ETDEWEB)

Berket, Karlo [Univ. of California, Santa Barbara, CA (United States)

2000-12-04

Reliable group ordered delivery of multicast messages in a distributed system is a useful service that simplifies the programming of distributed applications. Such a service helps to maintain the consistency of replicated information and to coordinate the activities of the various processes. With the increasing popularity of the Internet, there is an increasing interest in scaling the protocols that provide this service to the environment of the Internet. The InterGroup protocol suite, described in this dissertation, provides such a service, and is intended for the environment of the Internet with scalability to large numbers of nodes and high latency links. The InterGroup protocols approach the scalability problem from various directions. They redefine the meaning of group membership, allow voluntary membership changes, add a receiver-oriented selection of delivery guarantees that permits heterogeneity of the receiver set, and provide a scalable reliability service. The InterGroup system comprises several components, executing at various sites within the system. Each component provides part of the services necessary to implement a group communication system for the wide-area. The components can be categorized as: (1) control hierarchy, (2) reliable multicast, (3) message distribution and delivery, and (4) process group membership. We have implemented a prototype of the InterGroup protocols in Java, and have tested the system performance in both local-area and wide-area networks.

Simulation-Based Performance Evaluation of Predictive-Hashing Based Multicast Authentication Protocol

Directory of Open Access Journals (Sweden)

Seonho Choi

2012-12-01

Full Text Available A predictive-hashing based Denial-of-Service (DoS resistant multicast authentication protocol was proposed based upon predictive-hashing, one-way key chain, erasure codes, and distillation codes techniques [4, 5]. It was claimed that this new scheme should be more resistant to various types of DoS attacks, and its worst-case resource requirements were derived in terms of coarse-level system parameters including CPU times for signature verification and erasure/distillation decoding operations, attack levels, etc. To show the effectiveness of our approach and to analyze exact resource requirements in various attack scenarios with different parameter settings, we designed and implemented an attack simulator which is platformindependent. Various attack scenarios may be created with different attack types and parameters against a receiver equipped with the predictive-hashing based protocol. The design of the simulator is explained, and the simulation results are presented with detailed resource usage statistics. In addition, resistance level to various types of DoS attacks is formulated with a newly defined resistance metric. By comparing these results to those from another approach, PRABS [8], we show that the resistance level of our protocol is greatly enhanced even in the presence of many attack streams.

All-optical multi-wavelength conversion with negative power penalty by a commercial SOA-MZI for WDM wavelength multicast

NARCIS (Netherlands)

Yan, N.; Jung, H.D.; Tafur Monroy, I.; Waardt, de H.; Koonen, A.M.J.

2007-01-01

WDM wavelength multicast is demonstrated by all-optical multi-wavelength conversion at 10 Gb/s using a commercial SOA-MZI. We report for the first time simultaneous one-to-four conversion with negative power penalty of 1.84 dB.

Assessing the Impact of Imperfect Diagnosis on Service Reliability

DEFF Research Database (Denmark)

Grønbæk, Lars Jesper; Schwefel, Hans-Peter; Kjærgaard, Jens Kristian

2010-01-01

, representative diagnosis performance metrics have been defined and their closed-form solutions obtained for the Markov model. These equations enable model parameterization from traces of implemented diagnosis components. The diagnosis model has been integrated in a reliability model assessing the impact...... of the diagnosis functions for the studied reliability problem. In a simulation study we finally analyze trade-off properties of diagnosis heuristics from literature, map them to the analytic Markov model, and investigate its suitability for service reliability optimization....

Reliability and service life of wood structures and buildings

Directory of Open Access Journals (Sweden)

Zdeňka Havířová

2005-01-01

Full Text Available Service life of constructions and buildings of wood is dependent on temperature and moisture conditions in layers of the building cladding where the wood framework is built in. Temperature/moisture conditions or the corresponding equilibrium moisture content (EMC of the construction show considerable effects on the functional reliability of the whole building from the viewpoint of mechanical resistance and stability (ER1, energy savings and thermal protection (ER6 and hygiene, health and environment protection (ER3. To ensure the reliability of constructions and buildings for the period of their supposed service life a more profound analysis of constructions is necessary from the aspect of a global thermal/technical evaluation.

A Novel Analytic Technique for the Service Station Reliability in a Discrete-Time Repairable Queue

Directory of Open Access Journals (Sweden)

Renbin Liu

2013-01-01

Full Text Available This paper presents a decomposition technique for the service station reliability in a discrete-time repairable GeomX/G/1 queueing system, in which the server takes exhaustive service and multiple adaptive delayed vacation discipline. Using such a novel analytic technique, some important reliability indices and reliability relation equations of the service station are derived. Furthermore, the structures of the service station indices are also found. Finally, special cases and numerical examples validate the derived results and show that our analytic technique is applicable to reliability analysis of some complex discrete-time repairable bulk arrival queueing systems.

Reliability analysis of service water system under earthquake

International Nuclear Information System (INIS)

Yu Yu; Qian Xiaoming; Lu Xuefeng; Wang Shengfei; Niu Fenglei

2013-01-01

Service water system is one of the important safety systems in nuclear power plant, whose failure probability is always gained by system reliability analysis. The probability of equipment failure under the earthquake is the function of the peak acceleration of earthquake motion, while the occurrence of earthquake is of randomicity, thus the traditional fault tree method in current probability safety assessment is not powerful enough to deal with such case of conditional probability problem. An analysis frame was put forward for system reliability evaluation in seismic condition in this paper, in which Monte Carlo simulation was used to deal with conditional probability problem. Annual failure probability of service water system was calculated, and failure probability of 1.46X10 -4 per year was obtained. The analysis result is in accordance with the data which indicate equipment seismic resistance capability, and the rationality of the model is validated. (authors)

A Fast Optimization Method for Reliability and Performance of Cloud Services Composition Application

Directory of Open Access Journals (Sweden)

Zhao Wu

2013-01-01

Full Text Available At present the cloud computing is one of the newest trends of distributed computation, which is propelling another important revolution of software industry. The cloud services composition is one of the key techniques in software development. The optimization for reliability and performance of cloud services composition application, which is a typical stochastic optimization problem, is confronted with severe challenges due to its randomness and long transaction, as well as the characteristics of the cloud computing resources such as openness and dynamic. The traditional reliability and performance optimization techniques, for example, Markov model and state space analysis and so forth, have some defects such as being too time consuming and easy to cause state space explosion and unsatisfied the assumptions of component execution independence. To overcome these defects, we propose a fast optimization method for reliability and performance of cloud services composition application based on universal generating function and genetic algorithm in this paper. At first, a reliability and performance model for cloud service composition application based on the multiple state system theory is presented. Then the reliability and performance definition based on universal generating function is proposed. Based on this, a fast reliability and performance optimization algorithm is presented. In the end, the illustrative examples are given.

Reliability analysis of the service water system of Angra 1 reactor

International Nuclear Information System (INIS)

Tayt-Sohn, L.C.; Oliveira, L.F.S. de.

1984-01-01

A reliability analysis of the service water system is done aiming to use in the evaluation of the non reliability of the Component Cooling System (SRC) for great loss of cooling accidents in nuclear power plants. (E.G.) [pt

Reliability analysis of the service water system of Angra 1 reactor

International Nuclear Information System (INIS)

Oliveira, L.F.S. de; Fleming, P.V.; Frutuoso e Melo, P.F.F.; Tayt-Sohn, L.C.

1983-01-01

A reliability analysis of the service water system is done aiming to use in the evaluation of the non reliability of the component cooling system (SRC) for great loss of cooling accidents in nuclear power plants. (E.G.) [pt

Reliability of piping system components. Framework for estimating failure parameters from service data

International Nuclear Information System (INIS)

Nyman, R.; Hegedus, D.; Tomic, B.; Lydell, B.

1997-12-01

This report summarizes results and insights from the final phase of a R and D project on piping reliability sponsored by the Swedish Nuclear Power Inspectorate (SKI). The technical scope includes the development of an analysis framework for estimating piping reliability parameters from service data. The R and D has produced a large database on the operating experience with piping systems in commercial nuclear power plants worldwide. It covers the period 1970 to the present. The scope of the work emphasized pipe failures (i.e., flaws/cracks, leaks and ruptures) in light water reactors (LWRs). Pipe failures are rare events. A data reduction format was developed to ensure that homogenous data sets are prepared from scarce service data. This data reduction format distinguishes between reliability attributes and reliability influence factors. The quantitative results of the analysis of service data are in the form of conditional probabilities of pipe rupture given failures (flaws/cracks, leaks or ruptures) and frequencies of pipe failures. Finally, the R and D by SKI produced an analysis framework in support of practical applications of service data in PSA. This, multi-purpose framework, termed 'PFCA'-Pipe Failure Cause and Attribute- defines minimum requirements on piping reliability analysis. The application of service data should reflect the requirements of an application. Together with raw data summaries, this analysis framework enables the development of a prior and a posterior pipe rupture probability distribution. The framework supports LOCA frequency estimation, steam line break frequency estimation, as well as the development of strategies for optimized in-service inspection strategies

Reliability of piping system components. Framework for estimating failure parameters from service data

Energy Technology Data Exchange (ETDEWEB)

Nyman, R [Swedish Nuclear Power Inspectorate, Stockholm (Sweden); Hegedus, D; Tomic, B [ENCONET Consulting GesmbH, Vienna (Austria); Lydell, B [RSA Technologies, Vista, CA (United States)

1997-12-01

This report summarizes results and insights from the final phase of a R and D project on piping reliability sponsored by the Swedish Nuclear Power Inspectorate (SKI). The technical scope includes the development of an analysis framework for estimating piping reliability parameters from service data. The R and D has produced a large database on the operating experience with piping systems in commercial nuclear power plants worldwide. It covers the period 1970 to the present. The scope of the work emphasized pipe failures (i.e., flaws/cracks, leaks and ruptures) in light water reactors (LWRs). Pipe failures are rare events. A data reduction format was developed to ensure that homogenous data sets are prepared from scarce service data. This data reduction format distinguishes between reliability attributes and reliability influence factors. The quantitative results of the analysis of service data are in the form of conditional probabilities of pipe rupture given failures (flaws/cracks, leaks or ruptures) and frequencies of pipe failures. Finally, the R and D by SKI produced an analysis framework in support of practical applications of service data in PSA. This, multi-purpose framework, termed `PFCA`-Pipe Failure Cause and Attribute- defines minimum requirements on piping reliability analysis. The application of service data should reflect the requirements of an application. Together with raw data summaries, this analysis framework enables the development of a prior and a posterior pipe rupture probability distribution. The framework supports LOCA frequency estimation, steam line break frequency estimation, as well as the development of strategies for optimized in-service inspection strategies. 63 refs, 30 tabs, 22 figs.

An efficient mechanism for dynamic multicast traffic grooming in overlay IP/MPLS over WDM networks

Science.gov (United States)

Yu, Xiaojun; Xiao, Gaoxi; Cheng, Tee Hiang

2014-08-01

This paper proposes an efficient overlay multicast provisioning (OMP) mechanism for dynamic multicast traffic grooming in overlay IP/MPLS over WDM networks. To facilitate request provisioning, OMP jointly utilizes a data learning (DL) scheme on the IP/MPLS layer for logical link cost estimation, and a lightpath fragmentation (LPF) based method on the WDM layer for improving resource sharing in grooming process. Extensive simulations are carried out to evaluate the performance of OMP mechanism under different traffic loads, with either limited or unlimited port resources. Simulation results demonstrate that OMP significantly outperforms the existing methods. To evaluate the respective influences of the DL scheme and the LPF method on OMP performance, provisioning mechanisms only utilizing either the IP/MPLS layer DL scheme or the WDM layer LPF method are also devised. Comparison results show that both DL and LPF methods help improve OMP blocking performance, and contribution from the DL scheme is more significant when the fixed routing and first-fit wavelength assignment (RWA) strategy is adopted on the WDM layer. Effects of a few other factors, including definition of connection cost to be reported by the WDM layer to the IP/MPLS layer and WDM-layer routing method, on OMP performance are also evaluated.

Development of a real-time monitoring system and integration of different computer system in LHD experiments using IP multicast

International Nuclear Information System (INIS)

Emoto, Masahiko; Nakamura, Yukio; Teramachi, Yasuaki; Okumura, Haruhiko; Yamaguchi, Satarou

2002-01-01

There are several different computer systems in LHD (Large Helical Device) experiment, and therefore the coalition of these computers is a key to perform the experiment. Real-time monitoring system is also important because the long discharge is needed in the LHD experiment. In order to achieve these two requirements, the technique of IP multicast is adopted. The authors have developed three new systems, the first one is the real-time monitoring system, the next one is the delivery system of the shot number and the last one is the real-time notification system of the plasma data registration. The first system can deliver the real-time monitoring data to the LHD experimental LAN through the firewall of the LHD control LAN in NIFS. The other two systems are used to realize high coalition of the different computers in the LHD plasma experiment. We can conclude that IP multicast is very useful both in the LHD experiment and a future large plasma experiment from various experiences. (author)

Reliability theory for repair service organization simulation and increase of innovative attraction of industrial enterprises

Science.gov (United States)

Dolzhenkova, E. V.; Iurieva, L. V.

2018-05-01

The study presents the author's algorithm for the industrial enterprise repair service organization simulation based on the reliability theory, as well as the results of its application. The monitoring of the industrial enterprise repair service organization is proposed to perform on the basis of the enterprise's state indexes for the main resources (equipment, labour, finances, repair areas), which allows quantitative evaluation of the reliability level as a resulting summary rating of the said parameters and the ensuring of an appropriate level of the operation reliability of the serviced technical objects. Under the conditions of the tough competition, the following approach is advisable: the higher efficiency of production and a repair service itself, the higher the innovative attractiveness of an industrial enterprise. The results of the calculations show that in order to prevent inefficient losses of production and to reduce the repair costs, it is advisable to apply the reliability theory. The overall reliability rating calculated on the basis of the author's algorithm has low values. The processing of the statistical data forms the reliability characteristics for the different workshops and services of an industrial enterprise, which allows one to define the failure rates of the various units of equipment and to establish the reliability indexes necessary for the subsequent mathematical simulation. The proposed simulating algorithm contributes to an increase of the efficiency of the repair service organization and improvement of the innovative attraction of an industrial enterprise.

Reliable execution based on CPN and skyline optimization for Web service composition.

Science.gov (United States)

Chen, Liping; Ha, Weitao; Zhang, Guojun

2013-01-01

With development of SOA, the complex problem can be solved by combining available individual services and ordering them to best suit user's requirements. Web services composition is widely used in business environment. With the features of inherent autonomy and heterogeneity for component web services, it is difficult to predict the behavior of the overall composite service. Therefore, transactional properties and nonfunctional quality of service (QoS) properties are crucial for selecting the web services to take part in the composition. Transactional properties ensure reliability of composite Web service, and QoS properties can identify the best candidate web services from a set of functionally equivalent services. In this paper we define a Colored Petri Net (CPN) model which involves transactional properties of web services in the composition process. To ensure reliable and correct execution, unfolding processes of the CPN are followed. The execution of transactional composition Web service (TCWS) is formalized by CPN properties. To identify the best services of QoS properties from candidate service sets formed in the TCSW-CPN, we use skyline computation to retrieve dominant Web service. It can overcome that the reduction of individual scores to an overall similarity leads to significant information loss. We evaluate our approach experimentally using both real and synthetically generated datasets.

Collaboration Services: Enabling Chat in Disadvantaged Grids

Science.gov (United States)

2014-06-01

grids in the tactical domain" [2]. The main focus of this group is to identify what we call tactical SOA foundation services. By this we mean which...Here, only IPv4 is supported, as differences relating to IPv4 and IPv6 addressing meant that this functionality was not easily extended to use IPv6 ...multicast groups. Our IPv4 implementation is fully compliant with the specification, whereas the IPv6 implementation uses our own interpretation of

Design alternatives for process group membership and multicast

Science.gov (United States)

Birman, Kenneth P.; Cooper, Robert; Gleeson, Barry

1991-01-01

Process groups are a natural tool for distributed programming, and are increasingly important in distributed computing environments. However, there is little agreement on the most appropriate semantics for process group membership and group communication. These issues are of special importance in the Isis system, a toolkit for distributed programming. Isis supports several styles of process group, and a collection of group communication protocols spanning a range of atomicity and ordering properties. This flexibility makes Isis adaptable to a variety of applications, but is also a source of complexity that limits performance. This paper reports on a new architecture that arose from an effort to simplify Isis process group semantics. Our findings include a refined notion of how the clients of a group should be treated, what the properties of a multicast primitive should be when systems contain large numbers of overlapping groups, and a new construct called the casuality domain. As an illustration, we apply the architecture to the problem of converting processes into fault-tolerant process groups in a manner that is 'transparent' to other processes in the system.

Multicast in Femtocell Networks: A Successive Interference Cancellation Approach

Directory of Open Access Journals (Sweden)

Donglin Hu

2014-09-01

Full Text Available A femtocell is a small cellular base station (BS, typically used for serving approved users within a small coverage. In this paper, we investigate the problem of data multicast in femtocell networks that incorporates superposition coding (SC and successive interference cancellation (SIC. The problem is to decide the transmission schedule for each BS, as well as the power allocation for the SC layers, to achieve a sufficiently large SNR for each layer to be decodable with SIC at each user. Minimizing the total BS power consumption achieves the goal of “green” communications. We formulate a Mixed Integer Nonlinear Programming (MINLP problem, and then reformulate the problem into a simpler form. Upper and lower performance bounds on the total BS power consumption are derived. Finally, we consider three typical connection scenarios, and develop optimal and nearoptimal algorithms for the three scenarios. The proposed algorithms have low computational complexity, and outperform a heuristic scheme with considerable gains in our simulation study.

Reliability assessment of serviceability performance of braced retaining walls using a neural network approach

Science.gov (United States)

Goh, A. T. C.; Kulhawy, F. H.

2005-05-01

In urban environments, one major concern with deep excavations in soft clay is the potentially large ground deformations in and around the excavation. Excessive movements can damage adjacent buildings and utilities. There are many uncertainties associated with the calculation of the ultimate or serviceability performance of a braced excavation system. These include the variabilities of the loadings, geotechnical soil properties, and engineering and geometrical properties of the wall. A risk-based approach to serviceability performance failure is necessary to incorporate systematically the uncertainties associated with the various design parameters. This paper demonstrates the use of an integrated neural network-reliability method to assess the risk of serviceability failure through the calculation of the reliability index. By first performing a series of parametric studies using the finite element method and then approximating the non-linear limit state surface (the boundary separating the safe and failure domains) through a neural network model, the reliability index can be determined with the aid of a spreadsheet. Two illustrative examples are presented to show how the serviceability performance for braced excavation problems can be assessed using the reliability index.

Estimated Value of Service Reliability for Electric Utility Customers in the United States

Energy Technology Data Exchange (ETDEWEB)

Sullivan, M.J.; Mercurio, Matthew; Schellenberg, Josh

2009-06-01

Information on the value of reliable electricity service can be used to assess the economic efficiency of investments in generation, transmission and distribution systems, to strategically target investments to customer segments that receive the most benefit from system improvements, and to numerically quantify the risk associated with different operating, planning and investment strategies. This paper summarizes research designed to provide estimates of the value of service reliability for electricity customers in the US. These estimates were obtained by analyzing the results from 28 customer value of service reliability studies conducted by 10 major US electric utilities over the 16 year period from 1989 to 2005. Because these studies used nearly identical interruption cost estimation or willingness-to-pay/accept methods it was possible to integrate their results into a single meta-database describing the value of electric service reliability observed in all of them. Once the datasets from the various studies were combined, a two-part regression model was used to estimate customer damage functions that can be generally applied to calculate customer interruption costs per event by season, time of day, day of week, and geographical regions within the US for industrial, commercial, and residential customers. Estimated interruption costs for different types of customers and of different duration are provided. Finally, additional research and development designed to expand the usefulness of this powerful database and analysis are suggested.

Reliability Evaluation of Service-Oriented Architecture Systems Considering Fault-Tolerance Designs

Directory of Open Access Journals (Sweden)

Kuan-Li Peng

2014-01-01

strategies. Sensitivity analysis of SOA at both coarse and fine grain levels is also studied, which can be used to efficiently identify the critical parts within the system. Two SOA system scenarios based on real industrial practices are studied. Experimental results show that the proposed SOA model can be used to accurately depict the behavior of SOA systems. Additionally, a sensitivity analysis that quantizes the effects of system structure as well as fault tolerance on the overall reliability is also studied. On the whole, the proposed reliability modeling and analysis framework may help the SOA system service provider to evaluate the overall system reliability effectively and also make smarter improvement plans by focusing resources on enhancing reliability-sensitive parts within the system.

Decentralized Cloud Method For Multicasting Media Stream

Directory of Open Access Journals (Sweden)

D M B N Bandara

2015-08-01

Full Text Available With the advancement of Information technology the concept of idea sharing has advanced. Mostly on presentations personal computer and projector have become essentials. But on most occasions for connecting these equipment cables and physical devices are used. This is inefficient and time consuming. If a problem occurs someone with technical knowledge is necessary to solve the situation. The objective of this research is to use the wireless technology to reduce the manual configuration and build up a platform where one can easily share files a visuals media and feedback. A system has been developed to detect all the devices over a network and upon granted permission will share video audio and access controls. Final outcome of the research was a collaborative software bundle which work together on a network. One part of the system is a Desktop Network Software. And other is a Mobile Application. Desktop application can detect all other devices in the network which provides the same facility and if required can allocate a group and share its screen files and have a message stream to each device using multicasting. Mobile application can act as a mobile remote to the host computer of the group which can detect any input from user and pass it to the system.

Reliability analysis of structures under periodic proof tests in service

Science.gov (United States)

Yang, J.-N.

1976-01-01

A reliability analysis of structures subjected to random service loads and periodic proof tests treats gust loads and maneuver loads as random processes. Crack initiation, crack propagation, and strength degradation are treated as the fatigue process. The time to fatigue crack initiation and ultimate strength are random variables. Residual strength decreases during crack propagation, so that failure rate increases with time. When a structure fails under periodic proof testing, a new structure is built and proof-tested. The probability of structural failure in service is derived from treatment of all the random variables, strength degradations, service loads, proof tests, and the renewal of failed structures. Some numerical examples are worked out.

Verification criteria on the reliability of personal dosimetric services from x and gamma radiations

International Nuclear Information System (INIS)

Borasi, G.; Benco, A.; Kaftal, S.

1990-07-01

The paper presents the methods used by Working Group ENEA-EDP (Experts in Personal Dosimetry) to control the reliability of the Dosimetric Services operating in Italy and asking for the above controls on voluntary basis. Testing and irradiation test methods are explained as well as the evaluation criteria. The paper includes suggestions and guide-lines to gain the status of 'Reliable Service'. Technical equipment and operating procedures needed to pass the test are also illustrated. (author)

Web server for priority ordered multimedia services

Science.gov (United States)

Celenk, Mehmet; Godavari, Rakesh K.; Vetnes, Vermund

2001-10-01

In this work, our aim is to provide finer priority levels in the design of a general-purpose Web multimedia server with provisions of the CM services. The type of services provided include reading/writing a web page, downloading/uploading an audio/video stream, navigating the Web through browsing, and interactive video teleconferencing. The selected priority encoding levels for such operations follow the order of admin read/write, hot page CM and Web multicasting, CM read, Web read, CM write and Web write. Hot pages are the most requested CM streams (e.g., the newest movies, video clips, and HDTV channels) and Web pages (e.g., portal pages of the commercial Internet search engines). Maintaining a list of these hot Web pages and CM streams in a content addressable buffer enables a server to multicast hot streams with lower latency and higher system throughput. Cold Web pages and CM streams are treated as regular Web and CM requests. Interactive CM operations such as pause (P), resume (R), fast-forward (FF), and rewind (RW) have to be executed without allocation of extra resources. The proposed multimedia server model is a part of the distributed network with load balancing schedulers. The SM is connected to an integrated disk scheduler (IDS), which supervises an allocated disk manager. The IDS follows the same priority handling as the SM, and implements a SCAN disk-scheduling method for an improved disk access and a higher throughput. Different disks are used for the Web and CM services in order to meet the QoS requirements of CM services. The IDS ouput is forwarded to an Integrated Transmission Scheduler (ITS). The ITS creates a priority ordered buffering of the retrieved Web pages and CM data streams that are fed into an auto regressive moving average (ARMA) based traffic shaping circuitry before being transmitted through the network.

Reliability-based service life assessment of concrete structures in nuclear power plants: optimum inspection and repair

International Nuclear Information System (INIS)

Ellingwood, B.R.; Mori, Y.

1995-01-01

Research is being conducted to address aging management of safety-related reinforced concrete structures in nuclear power plants (NPPs). Documentation is being prepared to identify potential structural safety issues and to recommend criteria for use in evaluating reinforced concrete structures for continued service. Time-dependent reliability analysis provides the framework and quantitative tools for the condition assessment. The role of in-service inspection and repair in ensuring continued reliability in-service is examined. (author). 19 refs., 4 figs

Evaluation and improvement in nondestructive examination (NDE) reliability for in-service inspection of light water reactors

International Nuclear Information System (INIS)

Deffenbaugh, J.D.; Good, M.S.; Green, E.R.; Heasler, P.G.; Simonen, F.A.; Spanner, J.C.; Taylor, T.T.

1988-01-01

The evaluation and improvement of NDE Reliability for In-service Inspection (ISI) of Light Water Reactors (NDE Reliability) Program at Pacific Northwest Laboratory (PNL) was established to determine the reliability of current ISI techniques and to develop recommendations that will ensure a suitably high inspection reliability. The objectives of this NRC program are to: determine the reliability of ultrasonic ISI performed on commercial light-water reactor (LWR) primary systems; determine the impact of NDE unreliability on system safety and determine the level of inspection reliability required to ensure a suitably low failure probability using probabilistic fracture mechanics analysis; evaluate the degree of reliability improvement that could be achieved using improved and advanced NDE technique; and recommend revisions to ASME Code, Section XI, and Regulatory Requirements, based on material properties, service conditions, and NDE uncertainties, that will ensure suitably low failure probabilities. The program consists of three basic tasks: a Piping task, a Pressure Vessel task, and an Evaluation and Improvement in NDE Reliability task. The major efforts were concentrated in the Piping task and the Evaluation and Improvement in NDE Reliability task

Reliability of buildings in service limit state for maximum horizontal displacements

Directory of Open Access Journals (Sweden)

A. G. B. Corelhano

Full Text Available Brazilian design code ABNT NBR6118:2003 - Design of Concrete Structures - Procedures - [1] proposes the use of simplified models for the consideration of non-linear material behavior in the evaluation of horizontal displacements in buildings. These models penalize stiffness of columns and beams, representing the effects of concrete cracking and avoiding costly physical non-linear analyses. The objectives of the present paper are to investigate the accuracy and uncertainty of these simplified models, as well as to evaluate the reliabilities of structures designed following ABNT NBR6118:2003[1&] in the service limit state for horizontal displacements. Model error statistics are obtained from 42 representative plane frames. The reliabilities of three typical (4, 8 and 12 floor buildings are evaluated, using the simplified models and a rigorous, physical and geometrical non-linear analysis. Results show that the 70/70 (column/beam stiffness reduction model is more accurate and less conservative than the 80/40 model. Results also show that ABNT NBR6118:2003 [1] design criteria for horizontal displacement limit states (masonry damage according to ACI 435.3R-68(1984 [10] are conservative, and result in reliability indexes which are larger than those recommended in EUROCODE [2] for irreversible service limit states.

Reliability and service life of wood structures and buildings

OpenAIRE

Zdeňka Havířová; Pavel Kubů

2005-01-01

Service life of constructions and buildings of wood is dependent on temperature and moisture conditions in layers of the building cladding where the wood framework is built in. Temperature/moisture conditions or the corresponding equilibrium moisture content (EMC) of the construction show considerable effects on the functional reliability of the whole building from the viewpoint of mechanical resistance and stability (ER1), energy savings and thermal protection (ER6) and hygiene, health and e...

Energy Effective Congestion Control for Multicast with Network Coding in Wireless Ad Hoc Network

Directory of Open Access Journals (Sweden)

Chuanxin Zhao

2014-01-01

Full Text Available In order to improve network throughput and reduce energy consumption, we propose in this paper a cross-layer optimization design that is able to achieve multicast utility maximization and energy consumption minimization. The joint optimization of congestion control and power allocation is formulated to be a nonlinear nonconvex problem. Using dual decomposition, a distributed optimization algorithm is proposed to avoid the congestion by control flow rate at the source node and eliminate the bottleneck by allocating the power at the intermediate node. Simulation results show that the cross-layer algorithm can increase network performance, reduce the energy consumption of wireless nodes and prolong the network lifetime, while keeping network throughput basically unchanged.

Beliefs concerning the reliability of nuclear power plant in-service inspections

International Nuclear Information System (INIS)

Kettunen, J.

1997-01-01

The aim of the study was to investigate belief systems held by the officials responsible for the planning and supervision of NDT operations within the Finnish nuclear industry. They were asked to express their opinions on (1) the reliability of NDT methods in general, (2) the factors influencing the reliability of in-service inspections, and (3) the degree of reliability of the current inspections operations conducted by means of NDT methods in the Finnish nuclear power plants. Another goal of the study was to assess the adequacy of officials' beliefs (or belief systems). The research data was collected by interviewing representatives from Finnish power companies (Imatran Voima Oy and Teollisuuden Voima Oy), independent inspection organisations, and the Finnish Centre for Radiation and Nuclear Safety (STUK). The adequacy of the beliefs expressed was assessed by means of the results obtained from international NDT reliability studies and on the basis of interviewees' own justification. (refs.)

Modeling Message Queueing Services with Reliability Guarantee in Cloud Computing Environment Using Colored Petri Nets

Directory of Open Access Journals (Sweden)

Jing Li

2015-01-01

Full Text Available Motivated by the need for loosely coupled and asynchronous dissemination of information, message queues are widely used in large-scale application areas. With the advent of virtualization technology, cloud-based message queueing services (CMQSs with distributed computing and storage are widely adopted to improve availability, scalability, and reliability; however, a critical issue is its performance and the quality of service (QoS. While numerous approaches evaluating system performance are available, there is no modeling approach for estimating and analyzing the performance of CMQSs. In this paper, we employ both the analytical and simulation modeling to address the performance of CMQSs with reliability guarantee. We present a visibility-based modeling approach (VMA for simulation model using colored Petri nets (CPN. Our model incorporates the important features of message queueing services in the cloud such as replication, message consistency, resource virtualization, and especially the mechanism named visibility timeout which is adopted in the services to guarantee system reliability. Finally, we evaluate our model through different experiments under varied scenarios to obtain important performance metrics such as total message delivery time, waiting number, and components utilization. Our results reveal considerable insights into resource scheduling and system configuration for service providers to estimate and gain performance optimization.

Joint Power Allocation for Multicast Systems with Physical-Layer Network Coding

Directory of Open Access Journals (Sweden)

Zhu Wei-Ping

2010-01-01

Full Text Available This paper addresses the joint power allocation issue in physical-layer network coding (PLNC of multicast systems with two sources and two destinations communicating via a large number of distributed relays. By maximizing the achievable system rate, a constrained optimization problem is first formulated to jointly allocate powers for the source and relay terminals. Due to the nonconvex nature of the cost function, an iterative algorithm with guaranteed convergence is developed to solve the joint power allocation problem. As an alternative, an upper bound of the achievable rate is also derived to modify the original cost function in order to obtain a convex optimization solution. This approximation is shown to be asymptotically optimal in the sense of maximizing the achievable rate. It is confirmed through Monte Carlo simulations that the proposed joint power allocation schemes are superior to the existing schemes in terms of achievable rate and cumulative distribution function (CDF.

4 × 10 Gb s−1 wavelength multicasting with tunable NRZ-to-RZ format conversion using nonlinear polarization rotation in an SOA

International Nuclear Information System (INIS)

Liu, S; Fu, S; Tang, M; Shum, P; Liu, D

2013-01-01

We experimentally demonstrate simultaneous 4 × 10 Gb s −1 all-optical wavelength multicasting and non-return-to-zero (NRZ)-on-off-keying (OOK) to return-to-zero (RZ)-OOK format conversion with a tunable duty cycle using nonlinear polarization rotation in a semiconductor optical amplifier (SOA). The experimental results show that the duty cycle of four converted RZ-OOK signals can be tuned by adjusting the orientation of a polarizer placed at the SOA output. Four-channel NRZ-OOK-to-RZ-OOK conversion with a full width at half maximum of 33–67 ps can be simultaneously obtained with an extinction ratio over 10 dB. Moreover, it is experimentally verified that such a wavelength multicasting scheme with simultaneous NRZ-OOK-to-RZ-OOK conversion is insensitive to the wavelength of the input signal, indicating that such a scheme can be operated in the whole C-band with less than 0.18 dB power penalty at a bit error ratio level of 10 −9 . The device can facilitate the cross-connection between optical transmission networks employing different modulation formats. (paper)

Toward Real-time Multi-criteria Decision Making for Bus Service Reliability Optimisation

DEFF Research Database (Denmark)

Tran, Vu The; Eklund, Peter; Cook, Chris

2015-01-01

factors (such as traffic congestion and bad weather) in high frequency transit operations often cause irregular headway that can result in decreased service reliability. The approach proposed in this paper, which has the capability of handling the uncertainty of transit operations based on Multi...

Improving Reliability of Service Operation Using FMEA Review and New Opportunity for Investigations

Science.gov (United States)

Sutrisno, Agung; Gunawan, Indra

2016-01-01

Despite its growing contribution to the global economy, investigation on the application status of service FMEA study to support realization of reliable service operation is very limited in literature. Motivated by such situation, the paper presented an initial survey on the status and research gaps in developing and applying FMEA in service sectors. Systematic preliminary survey using specific criteria are undertaken. Our study indicated that development and application of service FMEA are partially addressing the characteristics of service operations and it is still applied into the good deed and profit oriented operations. Opportunities for further investigation pertaining to advancement of its decision supporting tool for service risk appraisal, its modification to cope with sustainability related requirements and application of service FMEA in not for profit oriented operations are presented as new avenues for further investigation

Receiver Heterogeneity Helps

DEFF Research Database (Denmark)

Kovács, Erika R.; Pedersen, Morten Videbæk; Roetter, Daniel Enrique Lucani

2014-01-01

Heterogeneity amongst devices and desired service are commonly seen as a source of additional challenges for setting up an efficient multi-layer multicast service. In particular, devices requiring only the base layer can become a key bottleneck to the performance for other devices. This paper...... studies the case of a wireless multi-layer multicast setting and shows that the judicious use of network coding allows devices with different computational capabilities to trade-off processing complexity for an improved quality of service. As a consequence, individual devices can determine their required...... effort, while bringing significant advantages to the system as a whole. Network coding is used as a key element to reduce signaling in order to deliver the multicast service. More importantly, our proposed approach focuses on creating some structure in the transmitted stream by allowing inter-layer...

Flexible, Secure, and Reliable Data Sharing Service Based on Collaboration in Multicloud Environment

Directory of Open Access Journals (Sweden)

Qiang Wei

2018-01-01

Full Text Available Due to the abundant storage resources and high reliability data service of cloud computing, more individuals and enterprises are motivated to outsource their data to public cloud platform and enable legal data users to search and download what they need in the outsourced dataset. However, in “Paid Data Sharing” model, some valuable data should be encrypted before outsourcing for protecting owner’s economic benefits, which is an obstacle for flexible application. Specifically, if the owner does not know who (user will download which data files in advance and even does not know the attributes of user, he/she has to either remain online all the time or import a trusted third party (TTP to distribute the file decryption key to data user. Obviously, making the owner always remain online is too inflexible, and wholly depending on the security of TTP is a potential risk. In this paper, we propose a flexible, secure, and reliable data sharing scheme based on collaboration in multicloud environment. For securely and instantly providing data sharing service even if the owner is offline and without TTP, we distribute all encrypted split data/key blocks together to multiple cloud service providers (CSPs, respectively. An elaborate cryptographic protocol we designed helps the owner verify the correctness of data exchange bills, which is directly related to the owner’s economic benefits. Besides, in order to support reliable data service, the erasure-correcting code technic is exploited for tolerating multiple failures among CSPs, and we offer a secure keyword search mechanism that makes the system more close to reality. Extensive security analyses and experiments on real-world data show that our scheme is secure and efficient.

Reliability assessment of hydraulic cylinders considering service loads and flaw distribution

International Nuclear Information System (INIS)

Altamura, Alessandra; Beretta, Stefano

2012-01-01

Manufacturing process, service conditions and material properties are all necessary requirements to a good design of tubular mechanical components subjected to fatigue. The most common approach to this design is usually deterministic, where a fixed NDT threshold, related to flaw acceptance limit, is set. However many uncertainties are left aside, i.e. the failure probability related to the fatigue strength under applied loads. This paper addresses the reliability evaluation of tubular mechanical components carrying some flaws and subjected to cyclic internal pressure variation. The aim is comparing the probability of failure obtained under several assumptions. A reliability assessment model, based on a random variable approach, has been implemented by using the Monte Carlo method. The analysis of the results, from a case study based on load spectra measurements of hydraulic cylinders of earth moving machines, has consented to evaluate the most important factors influencing the fatigue life prediction of these components. Highlights: ► Reliability evaluation of tubular components subjected to variable internal pressure. ► The dispersion of the threshold controls the stochasticity of crack growth. ► A random variable model has been developed using Monte Carlo. ► Initial crack size and spectrum shape are key factors in reliability evaluation.

Assessing rural small community water supply in Limpopo, South Africa: water service benchmarks and reliability.

Science.gov (United States)

Majuru, Batsirai; Jagals, Paul; Hunter, Paul R

2012-10-01

Although a number of studies have reported on water supply improvements, few have simultaneously taken into account the reliability of the water services. The study aimed to assess whether upgrading water supply systems in small rural communities improved access, availability and potability of water by assessing the water services against selected benchmarks from the World Health Organisation and South African Department of Water Affairs, and to determine the impact of unreliability on the services. These benchmarks were applied in three rural communities in Limpopo, South Africa where rudimentary water supply services were being upgraded to basic services. Data were collected through structured interviews, observations and measurement, and multi-level linear regression models were used to assess the impact of water service upgrades on key outcome measures of distance to source, daily per capita water quantity and Escherichia coli count. When the basic system was operational, 72% of households met the minimum benchmarks for distance and water quantity, but only 8% met both enhanced benchmarks. During non-operational periods of the basic service, daily per capita water consumption decreased by 5.19l (pwater sources were 639 m further (p ≤ 0.001, 95% CI 560-718). Although both rudimentary and basic systems delivered water that met potability criteria at the sources, the quality of stored water sampled in the home was still unacceptable throughout the various service levels. These results show that basic water services can make substantial improvements to water access, availability, potability, but only if such services are reliable. Copyright © 2012 Elsevier B.V. All rights reserved.

Wavelength Tuning Free Transceiver Module in OLT Downstream Multicasting 4λ × 10 Gb/s TWDM-PON System

OpenAIRE

M. S. Salleh; A. S. M. Supa’at; S. M. Idrus; S. Yaakob; Z. M. Yusof

2014-01-01

We propose a new architecture of dynamic time-wavelength division multiplexing-passive optical network (TWDM-PON) system that employs integrated all-optical packet routing (AOPR) module using 4λ×10 Gbps downstream signal to support 20 km fiber transmission. This module has been designed to support high speed L2 aggregation and routing in the physical layer PON system by using multicasting cross-gain modulation (XGM) to route packet from any PON port to multiple PON links. Meanwhile, the fixed...

Demonstration of Essential Reliability Services by a 300-MW Solar Photovoltaic Power Plant

Energy Technology Data Exchange (ETDEWEB)

Loutan, Clyde; Klauer, Peter; Chowdhury, Sirajul; Hall, Stephen; Morjaria, Mahesh; Chadliev, Vladimir; Milam, Nick; Milan, Christopher; Gevorgian, Vahan

2017-03-24

The California Independent System Operator (CAISO), First Solar, and the National Renewable Energy Laboratory (NREL) conducted a demonstration project on a large utility-scale photovoltaic (PV) power plant in California to test its ability to provide essential ancillary services to the electric grid. With increasing shares of solar- and wind-generated energy on the electric grid, traditional generation resources equipped with automatic governor control (AGC) and automatic voltage regulation controls -- specifically, fossil thermal -- are being displaced. The deployment of utility-scale, grid-friendly PV power plants that incorporate advanced capabilities to support grid stability and reliability is essential for the large-scale integration of PV generation into the electric power grid, among other technical requirements. A typical PV power plant consists of multiple power electronic inverters and can contribute to grid stability and reliability through sophisticated 'grid-friendly' controls. In this way, PV power plants can be used to mitigate the impact of variability on the grid, a role typically reserved for conventional generators. In August 2016, testing was completed on First Solar's 300-MW PV power plant, and a large amount of test data was produced and analyzed that demonstrates the ability of PV power plants to use grid-friendly controls to provide essential reliability services. These data showed how the development of advanced power controls can enable PV to become a provider of a wide range of grid services, including spinning reserves, load following, voltage support, ramping, frequency response, variability smoothing, and frequency regulation to power quality. Specifically, the tests conducted included various forms of active power control such as AGC and frequency regulation; droop response; and reactive power, voltage, and power factor controls. This project demonstrated that advanced power electronics and solar generation can be

A reliable transmission protocol for ZigBee-based wireless patient monitoring.

Science.gov (United States)

Chen, Shyr-Kuen; Kao, Tsair; Chan, Chia-Tai; Huang, Chih-Ning; Chiang, Chih-Yen; Lai, Chin-Yu; Tung, Tse-Hua; Wang, Pi-Chung

2012-01-01

Patient monitoring systems are gaining their importance as the fast-growing global elderly population increases demands for caretaking. These systems use wireless technologies to transmit vital signs for medical evaluation. In a multihop ZigBee network, the existing systems usually use broadcast or multicast schemes to increase the reliability of signals transmission; however, both the schemes lead to significantly higher network traffic and end-to-end transmission delay. In this paper, we present a reliable transmission protocol based on anycast routing for wireless patient monitoring. Our scheme automatically selects the closest data receiver in an anycast group as a destination to reduce the transmission latency as well as the control overhead. The new protocol also shortens the latency of path recovery by initiating route recovery from the intermediate routers of the original path. On the basis of a reliable transmission scheme, we implement a ZigBee device for fall monitoring, which integrates fall detection, indoor positioning, and ECG monitoring. When the triaxial accelerometer of the device detects a fall, the current position of the patient is transmitted to an emergency center through a ZigBee network. In order to clarify the situation of the fallen patient, 4-s ECG signals are also transmitted. Our transmission scheme ensures the successful transmission of these critical messages. The experimental results show that our scheme is fast and reliable. We also demonstrate that our devices can seamlessly integrate with the next generation technology of wireless wide area network, worldwide interoperability for microwave access, to achieve real-time patient monitoring.

Towards Reliable Integrated Services for Dependable Systems

DEFF Research Database (Denmark)

Schiøler, Henrik; Ravn, Anders Peter; Izadi-Zamanabadi, Roozbeh

Reliability issues for various technical systems are discussed and focus is directed towards distributed systems, where communication facilities are vital to maintain system functionality. Reliability in communication subsystems is considered as a resource to be shared among a number of logical c...... applications residing on alternative routes. Details are provided for the operation of RRRSVP based on reliability slack calculus. Conclusions summarize the considerations and give directions for future research....... connections and a reliability management framework is suggested. We suggest a network layer level reliability management protocol RRSVP (Reliability Resource Reservation Protocol) as a counterpart of the RSVP for bandwidth and time resource management. Active and passive standby redundancy by background...

Towards Reliable Integrated Services for Dependable Systems

DEFF Research Database (Denmark)

Schiøler, Henrik; Ravn, Anders Peter; Izadi-Zamanabadi, Roozbeh

2003-01-01

Reliability issues for various technical systems are discussed and focus is directed towards distributed systems, where communication facilities are vital to maintain system functionality. Reliability in communication subsystems is considered as a resource to be shared among a number of logical c...... applications residing on alternative routes. Details are provided for the operation of RRRSVP based on reliability slack calculus. Conclusions summarize the considerations and give directions for future research....... connections and a reliability management framework is suggested. We suggest a network layer level reliability management protocol RRSVP (Reliability Resource Reservation Protocol) as a counterpart of the RSVP for bandwidth and time resource management. Active and passive standby redundancy by background...

A Secure Network Coding Based on Broadcast Encryption in SDN

Directory of Open Access Journals (Sweden)

Yue Chen

2016-01-01

Full Text Available By allowing intermediate nodes to encode the received packets before sending them out, network coding improves the capacity and robustness of multicast applications. But it is vulnerable to the pollution attacks. Some signature schemes were proposed to thwart such attacks, but most of them need to be homomorphic that the keys cannot be generated and managed easily. In this paper, we propose a novel fast and secure switch network coding multicast (SSNC on the software defined networks (SDN. In our scheme, the complicated secure multicast management was separated from the fast data transmission based on the SDN. Multiple multicasts will be aggregated to one multicast group according to the requirements of services and the network status. Then, the controller will route aggregated multicast group with network coding; only the trusted switch will be allowed to join the network coding by using broadcast encryption. The proposed scheme can use the traditional cryptography without homomorphy, which greatly reduces the complexity of the computation and improves the efficiency of transmission.

76 FR 73608 - Reliability Technical Conference, North American Electric Reliability Corporation, Public Service...

Science.gov (United States)

2011-11-29

... or municipal authority play in forming your bulk power system reliability plans? b. Do you support..., North American Electric Reliability Corporation (NERC) Nick Akins, CEO of American Electric Power (AEP..., EL11-62-000] Reliability Technical Conference, North American Electric Reliability Corporation, Public...

In-service inspection as an aid to steel pressure vessel reliability

International Nuclear Information System (INIS)

Nichols, R.W.

1975-01-01

In-service inspection has played an important role in non-nuclear pressure vessel technology, being a legal requirement in many countries. Evidence from surveys of reliability of non-nuclear plant has suggested that such inspections can be effective in reducing the risk of subsequent failures. Recent requirements of the ASME XI code which will be summarised have important implications on the techniques to be used for in-service inspection, and so on design and fabrication aspects. Moreover, in-service inspection can only be an effective procedure if its possible weaknesses are recognised. The first problem is to ensure that an ultrasonic technique is used which is capable of detecting defects of an order of magnitude smaller than the critical size for each particular situation, in whatever defect orientation is important. The potential of different ultrasonic techniques will be compared. Next it is necessary to ensure coverage of all the relevant material. In this respect machine operation is superior to manual scanning, so that manipulation and scanning devices have to be developed. Problems of local geometry and of deviations in geometry have to be discussed with designer and fabricator; plate and clad quality have to be controlled (with respect to surface contour, metallurgical condition and freedom from interfering defects) to ensure inspectability in depth. The reliability of the mechanical and electronic equipment has to be assessed and designed to meet high requirements. Some presentational aids to detection and interpretation will be discussed. Having located a potential defect, the application of fracture mechanics treatments requires knowledge of size, shape and orientation. Some of the problems will be discussed together with possible solutions. (author)

Some reliability targets affecting the necessary provisions for in-service inspection and monitoring of LMFBR engineering components

International Nuclear Information System (INIS)

Bolt, P.R.

1980-01-01

The possible consequences of failure of primary and secondary sodium circuit components are discussed with particular reference to post incident fault diagnosis, remedial procedures and outage durations. The core support structures and steam generator units are identified as particularly important components in terms of economic consequence of their failure. Important safety considerations may also apply. Levels of reliability for core support and steam generator integrity, necessary to meet economic and certain safety criteria, are discussed and quantitative data is given. Possible failure and deterioration mechanisms which could result in unacceptable reductions in reliability are then identified for the core support and steam generator units. Following a consideration of the reliability targets and possible causes of loss of reliability, an appraisal is made of the necessary extent of in-service data to be obtained on component behaviour and condition. In-service inspection and monitoring methods that could be used to obtain this data are described. Consideration is given to UK and overseas inspection experience on LMFBR and other nuclear plant. (author)

Some reliability targets affecting the necessary provisions for in-service inspection and monitoring of LMFBR engineering components

Energy Technology Data Exchange (ETDEWEB)

Bolt, P R [Fast Reactor Engineering, Plant Engineering Department, CEGB, Barnwood, Gloucester (United Kingdom)

1980-11-01

The possible consequences of failure of primary and secondary sodium circuit components are discussed with particular reference to post incident fault diagnosis, remedial procedures and outage durations. The core support structures and steam generator units are identified as particularly important components in terms of economic consequence of their failure. Important safety considerations may also apply. Levels of reliability for core support and steam generator integrity, necessary to meet economic and certain safety criteria, are discussed and quantitative data is given. Possible failure and deterioration mechanisms which could result in unacceptable reductions in reliability are then identified for the core support and steam generator units. Following a consideration of the reliability targets and possible causes of loss of reliability, an appraisal is made of the necessary extent of in-service data to be obtained on component behaviour and condition. In-service inspection and monitoring methods that could be used to obtain this data are described. Consideration is given to UK and overseas inspection experience on LMFBR and other nuclear plant. (author)

Modelo de asignación predictivo de longitudes de ondas en redes WDM teniendo en cuenta dispersión residual y tráficos unicast/multicast con QoS

Directory of Open Access Journals (Sweden)

Javier Sierra

2009-01-01

Full Text Available El tráfico de Internet está en constante crecimiento y con él las aplicaciones del tipo unicast/multicast con diferentes requerimientos de Calidad de Servicio (QoS. Esto es motivo para que las Redes de Transporte Ópticas (OTN deban continuar su evolución hacia redes completamente ópticas (sin conversiones Óptico-Electrónico-Óptico: OEO. S/G Light-tree es una arquitectura de los nodos de las redes all-OTN que permite el optimo enrutamiento y/o manejo de tráficos unicast/multicast empleando el concepto de Traffic Grooming (TG, granularidad de tráfico en un ambiente óptico. Las técnicas de grooming así como los algoritmos de asignación y enrutamiento propuestos hasta el momento no tienen en cuenta los fenómenos que se pueden prestar en la fibra óptica, los cuales atenúan o alteran las diferentes longitudes de onda en las redes WDM (Wavelength Division Multiplexing. La dispersión cromática es un fenómeno que deforma los pulsos transmitidos en una fibra óptica y el efecto depende de la longitud de onda empleada en la transmisión. En este artículo, se propone un modelo predictivo de asignación de longitudes de ondas basado en cadenas de Markov que tiene en cuenta la dispersión residual en redes WDM que soportan traffic grooming y tráficos unicast/multicast con requerimientos de QoS. Los resultados de las simulaciones realizadas muestran que el modelo propuesto mejora la probabilidad de bloqueo de tráficos con requerimientos de QoS.

Reliability and Validity of SERVQUAL Scores Used To Evaluate Perceptions of Library Service Quality.

Science.gov (United States)

Thompson, Bruce; Cook, Colleen

Research libraries are increasingly supplementing collection counts with perceptions of service quality as indices of status and productivity. The present study was undertaken to explore the reliability and validity of scores from the SERVQUAL measurement protocol (A. Parasuraman and others, 1991), which has previously been used in this type of…

Beyond redundancy how geographic redundancy can improve service availability and reliability of computer-based systems

CERN Document Server

Bauer, Eric; Eustace, Dan

2012-01-01

"While geographic redundancy can obviously be a huge benefit for disaster recovery, it is far less obvious what benefit is feasible and likely for more typical non-catastrophic hardware, software, and human failures. Georedundancy and Service Availability provides both a theoretical and practical treatment of the feasible and likely benefits of geographic redundancy for both service availability and service reliability. The text provides network/system planners, IS/IT operations folks, system architects, system engineers, developers, testers, and other industry practitioners with a general discussion about the capital expense/operating expense tradeoff that frames system redundancy and georedundancy"--

Implementing eco friendly highly reliable upload feature using multi 3G service

Science.gov (United States)

Tanutama, Lukas; Wijaya, Rico

2017-12-01

The current trend of eco friendly Internet access is preferred. In this research the understanding of eco friendly is minimum power consumption. The devices that are selected have operationally low power consumption and normally have no power consumption as they are hibernating during idle state. To have the reliability a router of a router that has internal load balancing feature will provide the improvement of previous research on multi 3G services for broadband lines. Previous studies emphasized on accessing and downloading information files from Public Cloud residing Web Servers. The demand is not only for speed but high reliability of access as well. High reliability will mean mitigating both direct and indirect high cost due to repeated attempts of uploading and downloading the large files. Nomadic and mobile computer users need viable solution. Following solution for downloading information has been proposed and tested. The solution is promising. The result is now extended to providing reliable access line by means of redundancy and automatic reconfiguration for uploading and downloading large information files to a Web Server in the Cloud. The technique is taking advantage of internal load balancing feature to provision a redundant line acting as a backup line. A router that has the ability to provide load balancing to several WAN lines is chosen. The WAN lines are constructed using multiple 3G lines. The router supports the accessing Internet with more than one 3G access line which increases the reliability and availability of the Internet access as the second line immediately takes over if the first line is disturbed.

QoS Adaptation in Multimedia Multicast Conference Applications for E-Learning Services

Science.gov (United States)

Deusdado, Sérgio; Carvalho, Paulo

2006-01-01

The evolution of the World Wide Web service has incorporated new distributed multimedia conference applications, powering a new generation of e-learning development and allowing improved interactivity and prohuman relations. Groupware applications are increasingly representative in the Internet home applications market, however, the Quality of…

A Fast and Reliable Broadcast Service for LTE-Advanced Exploiting Multihop Device-to-Device Transmissions

Directory of Open Access Journals (Sweden)

Giovanni Nardini

2017-11-01

Full Text Available Several applications, from the Internet of Things for smart cities to those for vehicular networks, need fast and reliable proximity-based broadcast communications, i.e., the ability to reach all peers in a geographical neighborhood around the originator of a message, as well as ubiquitous connectivity. In this paper, we point out the inherent limitations of the LTE (Long-Term Evolution cellular network, which make it difficult, if possible at all, to engineer such a service using traditional infrastructure-based communications. We argue, instead, that network-controlled device-to-device (D2D communications, relayed in a multihop fashion, can efficiently support this service. To substantiate the above claim, we design a proximity-based broadcast service which exploits multihop D2D. We discuss the relevant issues both at the UE (User Equipment, which has to run applications, and within the network (i.e., at the eNodeBs, where suitable resource allocation schemes have to be enforced. We evaluate the performance of a multihop D2D broadcasting using system-level simulations, and demonstrate that it is fast, reliable and economical from a resource consumption standpoint.

Opportunistic Relay Selection in Multicast Relay Networks using Compressive Sensing

KAUST Repository

Elkhalil, Khalil

2014-12-01

Relay selection is a simple technique that achieves spatial diversity in cooperative relay networks. However, for relay selection algorithms to make a selection decision, channel state information (CSI) from all cooperating relays is usually required at a central node. This requirement poses two important challenges. Firstly, CSI acquisition generates a great deal of feedback overhead (air-time) that could result in significant transmission delays. Secondly, the fed back channel information is usually corrupted by additive noise. This could lead to transmission outages if the central node selects the set of cooperating relays based on inaccurate feedback information. In this paper, we introduce a limited feedback relay selection algorithm for a multicast relay network. The proposed algorithm exploits the theory of compressive sensing to first obtain the identity of the “strong” relays with limited feedback. Following that, the CSI of the selected relays is estimated using linear minimum mean square error estimation. To minimize the effect of noise on the fed back CSI, we introduce a back-off strategy that optimally backs-off on the noisy estimated CSI. For a fixed group size, we provide closed form expressions for the scaling law of the maximum equivalent SNR for both Decode and Forward (DF) and Amplify and Forward (AF) cases. Numerical results show that the proposed algorithm drastically reduces the feedback air-time and achieves a rate close to that obtained by selection algorithms with dedicated error-free feedback channels.

Reliability constrained decision model for energy service provider incorporating demand response programs

International Nuclear Information System (INIS)

Mahboubi-Moghaddam, Esmaeil; Nayeripour, Majid; Aghaei, Jamshid

2016-01-01

Highlights: • The operation of Energy Service Providers (ESPs) in electricity markets is modeled. • Demand response as the cost-effective solution is used for energy service provider. • The market price uncertainty is modeled using the robust optimization technique. • The reliability of the distribution network is embedded into the framework. • The simulation results demonstrate the benefits of robust framework for ESPs. - Abstract: Demand response (DR) programs are becoming a critical concept for the efficiency of current electric power industries. Therefore, its various capabilities and barriers have to be investigated. In this paper, an effective decision model is presented for the strategic behavior of energy service providers (ESPs) to demonstrate how to participate in the day-ahead electricity market and how to allocate demand in the smart distribution network. Since market price affects DR and vice versa, a new two-step sequential framework is proposed, in which unit commitment problem (UC) is solved to forecast the expected locational marginal prices (LMPs), and successively DR program is applied to optimize the total cost of providing energy for the distribution network customers. This total cost includes the cost of purchased power from the market and distributed generation (DG) units, incentive cost paid to the customers, and compensation cost of power interruptions. To obtain compensation cost, the reliability evaluation of the distribution network is embedded into the framework using some innovative constraints. Furthermore, to consider the unexpected behaviors of the other market participants, the LMP prices are modeled as the uncertainty parameters using the robust optimization technique, which is more practical compared to the conventional stochastic approach. The simulation results demonstrate the significant benefits of the presented framework for the strategic performance of ESPs.

Collaboration Layer for Robots in Mobile Ad-hoc Networks

DEFF Research Database (Denmark)

Borch, Ole; Madsen, Per Printz; Broberg, Jacob Honor´e

2009-01-01

networks to solve tasks collaboratively. In this proposal the Collaboration Layer is modelled to handle service and position discovery, group management, and synchronisation among robots, but the layer is also designed to be extendable. Based on this model of the Collaboration Layer, generic services...... are provided to the application running on the robot. The services are generic because they can be used by many different applications, independent of the task to be solved. Likewise, specific services are requested from the underlying Virtual Machine, such as broadcast, multicast, and reliable unicast....... A prototype of the Collaboration Layer has been developed to run in a simulated environment and tested in an evaluation scenario. In the scenario five robots solve the tasks of vacuum cleaning and entrance guarding, which involves the ability to discover potential co-workers, form groups, shift from one group...

Research on Innovating, Applying Multiple Paths Routing Technique Based on Fuzzy Logic and Genetic Algorithm for Routing Messages in Service - Oriented Routing

Directory of Open Access Journals (Sweden)

Nguyen Thanh Long

2015-02-01

Full Text Available MANET (short for Mobile Ad-Hoc Network consists of a set of mobile network nodes, network configuration changes very fast. In content based routing, data is transferred from source node to request nodes is not based on destination addresses. Therefore, it is very flexible and reliable, because source node does not need to know destination nodes. If We can find multiple paths that satisfies bandwidth requirement, split the original message into multiple smaller messages to transmit concurrently on these paths. On destination nodes, combine separated messages into the original message. Hence it can utilize better network resources, causes data transfer rate to be higher, load balancing, failover. Service Oriented Routing is inherited from the model of content based routing (CBR, combined with several advanced techniques such as Multicast, multiple path routing, Genetic algorithm to increase the data rate, and data encryption to ensure information security. Fuzzy logic is a logical field study evaluating the accuracy of the results based on the approximation of the components involved, make decisions based on many factors relative accuracy based on experimental or mathematical proof. This article presents some techniques to support multiple path routing from one network node to a set of nodes with guaranteed quality of service. By using these techniques can decrease the network load, congestion, use network resources efficiently.

Beliefs concerning the reliability of nuclear power plant in-service inspections; Uskomuksia ydinvoimalaitoksissa suoritettavien tarkastusten luotettavuudesta

Energy Technology Data Exchange (ETDEWEB)

Kettunen, J. [VTT Automation, Espoo (Finland)

1997-01-01

The aim of the study was to investigate belief systems held by the officials responsible for the planning and supervision of NDT operations within the Finnish nuclear industry. They were asked to express their opinions on (1) the reliability of NDT methods in general, (2) the factors influencing the reliability of in-service inspections, and (3) the degree of reliability of the current inspections operations conducted by means of NDT methods in the Finnish nuclear power plants. Another goal of the study was to assess the adequacy of officials` beliefs (or belief systems). The research data was collected by interviewing representatives from Finnish power companies (Imatran Voima Oy and Teollisuuden Voima Oy), independent inspection organisations, and the Finnish Centre for Radiation and Nuclear Safety (STUK). The adequacy of the beliefs expressed was assessed by means of the results obtained from international NDT reliability studies and on the basis of interviewees` own justification. (refs.).

A Scalable and Reliable Message Transport Service for the ATLAS Trigger and Data Acquisition System

CERN Document Server

Kazarov, A; The ATLAS collaboration; Kolos, S; Lehmann Miotto, G; Soloviev, I

2014-01-01

The ATLAS Trigger and Data Acquisition (TDAQ) is a large distributed computing system composed of several thousands of interconnected computers and tens of thousands applications. During a run, TDAQ applications produce a lot of control and information messages with variable rates, addressed to TDAQ operators or to other applications. Reliable, fast and accurate delivery of the messages is important for the functioning of the whole TDAQ system. The Message Transport Service (MTS) provides facilities for the reliable transport, the filtering and the routing of the messages, basing on publish-subscribe-notify communication pattern with content-based message filtering. During the ongoing LHC shutdown, the MTS was re-implemented, taking into account important requirements like reliability, scalability and performance, handling of slow subscribers case and also simplicity of the design and the implementation. MTS uses CORBA middleware, a common layer for TDAQ infrastructure, and provides sending/subscribing APIs i...

A pilot study to explore the feasibility of using theClinical Care Classification System for developing a reliable costing method for nursing services.

Science.gov (United States)

Dykes, Patricia C; Wantland, Dean; Whittenburg, Luann; Lipsitz, Stuart; Saba, Virginia K

2013-01-01

While nursing activities represent a significant proportion of inpatient care, there are no reliable methods for determining nursing costs based on the actual services provided by the nursing staff. Capture of data to support accurate measurement and reporting on the cost of nursing services is fundamental to effective resource utilization. Adopting standard terminologies that support tracking both the quality and the cost of care could reduce the data entry burden on direct care providers. This pilot study evaluated the feasibility of using a standardized nursing terminology, the Clinical Care Classification System (CCC), for developing a reliable costing method for nursing services. Two different approaches are explored; the Relative Value Unit RVU and the simple cost-to-time methods. We found that the simple cost-to-time method was more accurate and more transparent in its derivation than the RVU method and may support a more consistent and reliable approach for costing nursing services.

Problematics of Reliability of Road Rollers

Science.gov (United States)

Stawowiak, Michał; Kuczaj, Mariusz

2018-06-01

This article refers to the reliability of road rollers used in a selected roadworks company. Information on the method of road rollers service and how the service affects the reliability of these rollers is presented. Attention was paid to the process of the implemented maintenance plan with regard to the machine's operational time. The reliability of road rollers was analyzed by determining and interpreting readiness coefficients.

Reliability and Availability of Cloud Computing

CERN Document Server

Bauer, Eric

2012-01-01

A holistic approach to service reliability and availability of cloud computing Reliability and Availability of Cloud Computing provides IS/IT system and solution architects, developers, and engineers with the knowledge needed to assess the impact of virtualization and cloud computing on service reliability and availability. It reveals how to select the most appropriate design for reliability diligence to assure that user expectations are met. Organized in three parts (basics, risk analysis, and recommendations), this resource is accessible to readers of diverse backgrounds and experience le

Serviceability design load factors and reliability assessments for reinforced concrete containment structures

International Nuclear Information System (INIS)

Han Bong Koo

1998-01-01

A reinforced concrete nuclear power plant containment structure is subjected to various random static and stochastic loads during its lifetime. Since these loads involve inherent randomness and other uncertainties, an appropriate probabilistic model for each load must be established in order to perform reliability analysis. The current ASME code for reinforced concrete containment structures are not based on probability concepts. The stochastic nature of natural hazard or accidental loads and the variations of material properties require a probabilistic approach for a rational assessment of structural safety and performance. The paper develops probability-based load factors for the limit state design of reinforced concrete containment structures. The purpose of constructing reinforced concrete containment structure is to protect against radioactive release, and so the use of a serviceability limit state against crack failure that can cause the emission of radioactive materials is suggested as a critical limit state for reinforced concrete containment structures. Load factors for the design of reinforced concrete containment structures are proposed and carried out the reliability assessments. (orig.)

Network connectivity enhancement by exploiting all optical multicast in semiconductor ring laser

Science.gov (United States)

Siraj, M.; Memon, M. I.; Shoaib, M.; Alshebeili, S.

2015-03-01

The use of smart phone and tablet applications will provide the troops for executing, controlling and analyzing sophisticated operations with the commanders providing crucial documents directly to troops wherever and whenever needed. Wireless mesh networks (WMNs) is a cutting edge networking technology which is capable of supporting Joint Tactical radio System (JTRS).WMNs are capable of providing the much needed bandwidth for applications like hand held radios and communication for airborne and ground vehicles. Routing management tasks can be efficiently handled through WMNs through a central command control center. As the spectrum space is congested, cognitive radios are a much welcome technology that will provide much needed bandwidth. They can self-configure themselves, can adapt themselves to the user requirement, provide dynamic spectrum access for minimizing interference and also deliver optimal power output. Sometimes in the indoor environment, there are poor signal issues and reduced coverage. In this paper, a solution utilizing (CR WMNs) over optical network is presented by creating nanocells (PCs) inside the indoor environment. The phenomenon of four-wave mixing (FWM) is exploited to generate all-optical multicast using semiconductor ring laser (SRL). As a result same signal is transmitted at different wavelengths. Every PC is assigned a unique wavelength. By using CR technology in conjunction with PC will not only solve network coverage issue but will provide a good bandwidth to the secondary users.

A Testbed for Highly-Scalable Mission Critical Information Systems

National Research Council Canada - National Science Library

Birman, Kenneth P

2005-01-01

... systems in a networked environment. Headed by Professor Ken Birman, the project is exploring a novel fusion of classical protocols for reliable multicast communication with a new style of peer-to-peer protocol called scalable "gossip...

A Performance Evaluation of NACK-Oriented Protocols as the Foundation of Reliable Delay- Tolerant Networking Convergence Layers

Science.gov (United States)

Iannicca, Dennis; Hylton, Alan; Ishac, Joseph

2012-01-01

Delay-Tolerant Networking (DTN) is an active area of research in the space communications community. DTN uses a standard layered approach with the Bundle Protocol operating on top of transport layer protocols known as convergence layers that actually transmit the data between nodes. Several different common transport layer protocols have been implemented as convergence layers in DTN implementations including User Datagram Protocol (UDP), Transmission Control Protocol (TCP), and Licklider Transmission Protocol (LTP). The purpose of this paper is to evaluate several stand-alone implementations of negative-acknowledgment based transport layer protocols to determine how they perform in a variety of different link conditions. The transport protocols chosen for this evaluation include Consultative Committee for Space Data Systems (CCSDS) File Delivery Protocol (CFDP), Licklider Transmission Protocol (LTP), NACK-Oriented Reliable Multicast (NORM), and Saratoga. The test parameters that the protocols were subjected to are characteristic of common communications links ranging from terrestrial to cis-lunar and apply different levels of delay, line rate, and error.

Reliability and validity of the workplace harassment questionnaire for Korean finance and service workers.

Science.gov (United States)

Lee, Myeongjun; Kim, Hyunjung; Shin, Donghee; Lee, Sangyun

2016-01-01

Harassment means systemic and repeated unethical acts. Research on workplace harassment have been conducted widely and the NAQ-R has been widely used for the researches. But this tool, however the limitations in revealing differended in sub-factors depending on the culture and in reflecting that unique characteristics of the Koren society. So, The workplace harassment questionnaire for Korean finace and service workers has been developed to assess the level of personal harassment at work. This study aims to develop a tool to assess the level of personal harassment at work and to test its validity and reliability while examining specific characteristics of workplace harassment against finance and service workers in Korea. The framework of survey was established based on literature review, focused-group interview for the Korean finance and service workers. To verify its reliability, Cronbach's alpha coefficient was calculated; and to verify its validity, items and factors of the tool were analyzed. The correlation matrix analysis was examined to verify the tool's convergent validity and discriminant validity. Structural validity was verified by checking statistical significance in relation to the BDI-K. Cronbach's alpha coefficient of this survey was 0.93, which indicates a quite high level of reliability. To verify the appropriateness of this survey tool, its construct validity was examined through factor analysis. As a result of the factor analysis, 3 factors were extracted, explaining 56.5 % of the total variance. The loading values and communalities of the 20 items were 0.85 to 0.48 and 0.71 to 0.46. The convergent validity and discriminant validity were analyzed and rate of item discriminant validity was 100 %. Finally, for the concurrent validity, We examined the relationship between the WHI-KFSW and pschosocial stress by examining the correlation with the BDI-K. The results of chi-square test and multiple logistic analysis indicated that the correlation with

76 FR 66328 - Callaway Golf Ball Operations, Inc., Including On-Site Leased Workers From Reliable Temp Services...

Science.gov (United States)

2011-10-26

... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-80,110] Callaway Golf Ball... Golf Ball Operations, Inc., including on-site leased workers from Reliable Temp Services, Inc., and... production of golf balls. The notice was published in the Federal Register on July 8, 2011 (76 FR 40401). At...

Principles of Bridge Reliability

DEFF Research Database (Denmark)

Thoft-Christensen, Palle; Nowak, Andrzej S.

The paper gives a brief introduction to the basic principles of structural reliability theory and its application to bridge engineering. Fundamental concepts like failure probability and reliability index are introduced. Ultimate as well as serviceability limit states for bridges are formulated......, and as an example the reliability profile and a sensitivity analyses for a corroded reinforced concrete bridge is shown....

The Validity and Reliability Studies of the Internet Use of Pre-Service English Teachers Survey: A Turkish Context

Directory of Open Access Journals (Sweden)

Gülşah Külekçi

2011-11-01

Full Text Available As the availability of computers and the Internet in schools and classrooms has grown, so has interest in the extent to which these technologies are being used and for what purposes. Recently there has been many studies on teachers’ use of education technology in their classrooms and schools, the availability of this technology in their classrooms and schools, their training and preparation for their use and the barriers to technology use they encounter. Using the Internet effectively and the success of the Internet utilization is very much related to the users’ attitudes toward the Internet. This study aims at investigating the reliability and the validity of the Internet Use of Pre-service English Teachers Survey modified from the Master Thesis of Sudsuang Yutdhana. The survey contains two subscales as Internet Attitude Scale and Self-perception of Computing Skills. The survey was administered to randomly selected third and fourth year 96 pre – service English Teachers at Dokuz Eylül University Buca, Faculty of Education, Department of English Language Teaching. The results indicated that Internet Use of Pre-service English Teachers Survey (IUPETS is reliable and valid.

Why We Need Reliable, Valid, and Appropriate Learning Disability Assessments: The Perspective of a Postsecondary Disability Service Provider

Science.gov (United States)

Wolforth, Joan

2012-01-01

This paper discusses issues regarding the validity and reliability of psychoeducational assessments provided to Disability Services Offices at Canadian Universities. Several vignettes illustrate some current issues and the potential consequences when university students are given less than thorough disability evaluations and ascribed diagnoses.…

Reliability and Validity of Survey Instruments to Measure Work-Related Fatigue in the Emergency Medical Services Setting: A Systematic Review

Science.gov (United States)

2018-01-11

Background: This study sought to systematically search the literature to identify reliable and valid survey instruments for fatigue measurement in the Emergency Medical Services (EMS) occupational setting. Methods: A systematic review study design wa...

Methodology for reliability based condition assessment

International Nuclear Information System (INIS)

Mori, Y.; Ellingwood, B.

1993-08-01

Structures in nuclear power plants may be exposed to aggressive environmental effects that cause their strength to decrease over an extended period of service. A major concern in evaluating the continued service for such structures is to ensure that in their current condition they are able to withstand future extreme load events during the intended service life with a level of reliability sufficient for public safety. This report describes a methodology to facilitate quantitative assessments of current and future structural reliability and performance of structures in nuclear power plants. This methodology takes into account the nature of past and future loads, and randomness in strength and in degradation resulting from environmental factors. An adaptive Monte Carlo simulation procedure is used to evaluate time-dependent system reliability. The time-dependent reliability is sensitive to the time-varying load characteristics and to the choice of initial strength and strength degradation models but not to correlation in component strengths within a system. Inspection/maintenance strategies are identified that minimize the expected future costs of keeping the failure probability of a structure at or below an established target failure probability during its anticipated service period

Test-retest Reliability and Agreement of the Satisfaction with the Assistive Technology Services (SATS) Instrument in Two Nordic Countries

DEFF Research Database (Denmark)

Sund, Terje; Anttila, Heidi; Iwarsson, Susanne

2014-01-01

Purpose: The purpose of this study was to investigate test–retest reliability, agreement, internal consistency, and floor- and ceiling effects of the Danish and Finnish versions of the Satisfaction with the Assistive Technology Services (SATS) instrument among adult users of powered wheelchairs (...

Measuring Passenger Travel Time Reliability using Smartcard Data

NARCIS (Netherlands)

Bagherian, M.; Cats, O.; van Oort, N.; Hickman, M

2016-01-01

Service reliability is a key performance measure for transit agencies in increasing their service quality and thus ridership. Conventional reliability metrics are established based on vehicle movements and thus do not adequately reflect passenger’s experience. In the past few years, the growing

Risk-based Optimization and Reliability Levels of Coastal Structures

DEFF Research Database (Denmark)

Sørensen, John Dalsgaard; Burcharth, H. F.

Identification of optimum reliability levels for coastal structures is considered. A class of breakwaters is considered where no human injuries can be expected in cases of failure. The optimum reliability level is identified by minimizing the total costs over the service life of the structure, in...... on the minimumcost reliability levels is investigated for different values of the real rate of interest, the service lifetime, the downtime costs due to malfunction and the decommission costs.......Identification of optimum reliability levels for coastal structures is considered. A class of breakwaters is considered where no human injuries can be expected in cases of failure. The optimum reliability level is identified by minimizing the total costs over the service life of the structure...

Risk-based Optimization and Reliability Levels of Coastal Structures

DEFF Research Database (Denmark)

Sørensen, John Dalsgaard; Burcharth, Hans F.

2005-01-01

 Identification of optimum reliability levels for coastal structures is considered. A class of breakwaters is considered where no human injuries can be expected in cases of failure. The optimum reliability level is identified by minimizing the total costs over the service life of the structure, i...... on the minimumcost reliability levels is investigated for different values of the real rate of interest, the service lifetime, the downtime costs due to malfunction and the decommission costs....... Identification of optimum reliability levels for coastal structures is considered. A class of breakwaters is considered where no human injuries can be expected in cases of failure. The optimum reliability level is identified by minimizing the total costs over the service life of the structure...

Fast RTP Retransmission for IPTV - Implementation and Evaluation

NARCIS (Netherlands)

Prins, M.J.; Prins, M.J.; Brunner, M.; Karagiannis, Georgios; Lundqvist, H.; Nunzi, G.

2008-01-01

With the deployment of IPTV reliability for multicast is becoming an important research topic again. Even though it has been intensively investigated before, there is now an understanding of the deployment scenario and the application requirements that allows solutions to be evaluated in detail. We

Reliability-Based Code Calibration

DEFF Research Database (Denmark)

Faber, M.H.; Sørensen, John Dalsgaard

2003-01-01

The present paper addresses fundamental concepts of reliability based code calibration. First basic principles of structural reliability theory are introduced and it is shown how the results of FORM based reliability analysis may be related to partial safety factors and characteristic values....... Thereafter the code calibration problem is presented in its principal decision theoretical form and it is discussed how acceptable levels of failure probability (or target reliabilities) may be established. Furthermore suggested values for acceptable annual failure probabilities are given for ultimate...... and serviceability limit states. Finally the paper describes the Joint Committee on Structural Safety (JCSS) recommended procedure - CodeCal - for the practical implementation of reliability based code calibration of LRFD based design codes....

Reliability of length measurements collected by community nurses and health volunteers in rural growth monitoring and promotion services.

Science.gov (United States)

Laar, Matilda E; Marquis, Grace S; Lartey, Anna; Gray-Donald, Katherine

2018-02-17

Length measurements are important in growth, monitoring and promotion (GMP) for the surveillance of a child's weight-for-length and length-for-age. These two indices provide an indication of a child's risk of becoming wasted or stunted, and are more informative about a child's growth than the widely used weight-for-age index (underweight). Although the introduction of length measurements in GMP is recommended by the World Health Organization, concerns about the reliability of length measurements collected in rural outreach settings have been expressed by stakeholders. Our aim was to describe the reliability and challenges associated with community health personnel measuring length for rural outreach GMP activities. Two reliability studies (A and B), using 10 children less than 24 months each, were conducted in the GMP services of a rural district in Ghana. Fifteen nurses and 15 health volunteers (HV) with no prior experience in length measurements were trained. Intra- and inter-observer technical error of measurement (TEM), average bias from expert anthropometrist, and coefficient of reliability (R) of length measurements were assessed and compared across sessions. Observations and interviews were used to understand the ability and experiences of health personnel with measuring length at outreach GMP. Inter-observer TEM was larger than intra-observer TEM for both nurses and HV at both sessions and was unacceptably (compared to error standards) high in both groups at both time points. Average biases from expert's measurements were within acceptable limits, however, both groups tended to underestimate length measurements. The R for lengths collected by nurses (92.3%) was higher at session B compared to that of HV (87.5%). Length measurements taken by nurses and HV, and those taken by an experienced anthropometrist at GMP sessions were of moderate agreement (kappa = 0.53, p reliability of length measurements improved after two refresher trainings for nurses but

Reliability and safety engineering

CERN Document Server

Verma, Ajit Kumar; Karanki, Durga Rao

2016-01-01

Reliability and safety are core issues that must be addressed throughout the life cycle of engineering systems. Reliability and Safety Engineering presents an overview of the basic concepts, together with simple and practical illustrations. The authors present reliability terminology in various engineering fields, viz.,electronics engineering, software engineering, mechanical engineering, structural engineering and power systems engineering. The book describes the latest applications in the area of probabilistic safety assessment, such as technical specification optimization, risk monitoring and risk informed in-service inspection. Reliability and safety studies must, inevitably, deal with uncertainty, so the book includes uncertainty propagation methods: Monte Carlo simulation, fuzzy arithmetic, Dempster-Shafer theory and probability bounds. Reliability and Safety Engineering also highlights advances in system reliability and safety assessment including dynamic system modeling and uncertainty management. Cas...

QoS-Aware Active Queue Management for Multimedia Services over the Internet

Directory of Open Access Journals (Sweden)

Hwang I-Shyan

2011-01-01

Full Text Available Recently, with multimedia services such as IPTV, video conferencing has emerged as a main traffic source. When UDP coexists with TCP, it induces not only congestion collapse but also an unfairness problem. In this paper, a new Active Queue Management algorithm, called Traffic Sensitive Active Queue Management (TSAQM, is proposed for providing multimedia services in routers. The TSAQM is comprised of Dynamic Weight Allocate Scheme (DWAS and Service Guarantee Scheme (SGS. The purpose of DWAS is to fairly allocate resources with high end-user utility, and the SGS is to determine the satisfactory threshold (TH and threshold region (TR. Besides, a multiqueue design for different priority traffic, and threshold TH and threshold region TR is proposed to achieve the different QoS requirements. Several objectives of this proposed scheme include achieving high end user utility for video services, considering the multicast as well as unicast proprieties to meet interclass fairness, and achieving the QoS requirement by adaptively adjusting the thresholds based on the traffic situations. Performance comparisons with the GRED-I are in terms of packet dropping rate and throughput to highlight the better behavior of the proposed schemes due to taking into account the fairness and different weights for video layers.

Measuring Passenger Travel Time Reliability Using Smart Card Data

NARCIS (Netherlands)

Bagherian, M.; Cats, O.; van Oort, N.; Hickman, M

2016-01-01

Service reliability is a key performance measure for transit agencies in increasing their service quality and thus ridership. Conventional reliability metrics are established based on vehicle movements and thus do not adequately reflect passenger’s experience. In the past few years, the growing

Updated Value of Service Reliability Estimates for Electric Utility Customers in the United States

Energy Technology Data Exchange (ETDEWEB)

Sullivan, Michael [Nexant Inc., Burlington, MA (United States); Schellenberg, Josh [Nexant Inc., Burlington, MA (United States); Blundell, Marshall [Nexant Inc., Burlington, MA (United States)

2015-01-01

This report updates the 2009 meta-analysis that provides estimates of the value of service reliability for electricity customers in the United States (U.S.). The meta-dataset now includes 34 different datasets from surveys fielded by 10 different utility companies between 1989 and 2012. Because these studies used nearly identical interruption cost estimation or willingness-to-pay/accept methods, it was possible to integrate their results into a single meta-dataset describing the value of electric service reliability observed in all of them. Once the datasets from the various studies were combined, a two-part regression model was used to estimate customer damage functions that can be generally applied to calculate customer interruption costs per event by season, time of day, day of week, and geographical regions within the U.S. for industrial, commercial, and residential customers. This report focuses on the backwards stepwise selection process that was used to develop the final revised model for all customer classes. Across customer classes, the revised customer interruption cost model has improved significantly because it incorporates more data and does not include the many extraneous variables that were in the original specification from the 2009 meta-analysis. The backwards stepwise selection process led to a more parsimonious model that only included key variables, while still achieving comparable out-of-sample predictive performance. In turn, users of interruption cost estimation tools such as the Interruption Cost Estimate (ICE) Calculator will have less customer characteristics information to provide and the associated inputs page will be far less cumbersome. The upcoming new version of the ICE Calculator is anticipated to be released in 2015.

Human reliability impact on in-service inspection

International Nuclear Information System (INIS)

Spanner, J.C. Sr.

1986-01-01

This paper describes a study conducted to identify, characterize, and evaluate the human reliability aspects of ultrasonic testing/inservice inspection (UT/ISI). Recent measurements of UT/ISI system effectiveness have revealed wide variations in performance; suggesting that insufficient emphasis is being placed on the human reliability aspects of nondestructive examination. It appears that NDE performance can be improved through application of the human factors principles relating to the task, training, procedure, environmental, and individual difference variables. These variables are collectively referred to as performance-shaping factors. A man-machine systems model was developed to describe the UT/ISI process using functional task descriptors. The relative operating characteristic (ROC) analysis method, which is derived from signal detection theory, offers unique attributes for analyzing NDT performance. The results of a limited human factors evaluation conducted in conjunction with a mini-round robin test are also described

Multi-layer service function chaining scheduling based on auxiliary graph in IP over optical network

Science.gov (United States)

Li, Yixuan; Li, Hui; Liu, Yuze; Ji, Yuefeng

2017-10-01

Software Defined Optical Network (SDON) can be considered as extension of Software Defined Network (SDN) in optical networks. SDON offers a unified control plane and makes optical network an intelligent transport network with dynamic flexibility and service adaptability. For this reason, a comprehensive optical transmission service, able to achieve service differentiation all the way down to the optical transport layer, can be provided to service function chaining (SFC). IP over optical network, as a promising networking architecture to interconnect data centers, is the most widely used scenarios of SFC. In this paper, we offer a flexible and dynamic resource allocation method for diverse SFC service requests in the IP over optical network. To do so, we firstly propose the concept of optical service function (OSF) and a multi-layer SFC model. OSF represents the comprehensive optical transmission service (e.g., multicast, low latency, quality of service, etc.), which can be achieved in multi-layer SFC model. OSF can also be considered as a special SF. Secondly, we design a resource allocation algorithm, which we call OSF-oriented optical service scheduling algorithm. It is able to address multi-layer SFC optical service scheduling and provide comprehensive optical transmission service, while meeting multiple optical transmission requirements (e.g., bandwidth, latency, availability). Moreover, the algorithm exploits the concept of Auxiliary Graph. Finally, we compare our algorithm with the Baseline algorithm in simulation. And simulation results show that our algorithm achieves superior performance than Baseline algorithm in low traffic load condition.

The influence of frequency and reliability of in-service inspection on reactor pressure vessel disruptive failure probability

International Nuclear Information System (INIS)

Jordan, G.M.

1978-01-01

A simple probabilistic methodology is used to investigate the benefit, in terms of reduction of disruptive failure probability, which comes from the application of periodic in-service inspection to nuclear pressure vessels. The analysis indicates the strong interaction between inspection benefit and the intrinsic quality of the structure. In order to quantify the inspection benefit, assumptions are made which allow the quality to be characterised in terms of the parameters governing a log normal distribution of time - to - failure. Using these assumptions, it is shown that the overall benefit of in-service inspection unlikely to exceed an order of magnitude in terms of reduction of disruptive failure probability. The method is extended to evaluate the effect of the periodicity and reliability of the inspection process itself. (author)

A method to assign failure rates for piping reliability assessments

International Nuclear Information System (INIS)

Gamble, R.M.; Tagart, S.W. Jr.

1991-01-01

This paper reports on a simplified method that has been developed to assign failure rates that can be used in reliability and risk studies of piping. The method can be applied on a line-by-line basis by identifying line and location specific attributes that can lead to piping unreliability from in-service degradation mechanisms and random events. A survey of service experience for nuclear piping reliability also was performed. The data from this survey provides a basis for identifying in-service failure attributes and assigning failure rates for risk and reliability studies

Teaming up to improve reliability

International Nuclear Information System (INIS)

Malone, E.A.; Ayres, D.J.; Lear, R.C. van

1989-01-01

Responding to increasingly stringent regulatory requirements, Babcock and Wilcox has teamed up with three specialist companies to provide services for nuclear utilities aiming to improve the performance of their valves and actuators. The services, which are outlined here, include inspection, repair, overhaul and valve and actuator reliability programmes. (author)

Economic and Nonproliferation Analysis Framework for Assessing Reliable Nuclear Fuel Service Arrangements

International Nuclear Information System (INIS)

Phillips, Jon R.; Kreyling, Sean J.; Short, Steven M.; Weimar, Mark R.

2010-01-01

Nuclear power is now broadly recognized as an essential technology in national strategies to provide energy security while meeting carbon management goals. Yet a long standing conundrum remains: how to enable rapid growth in the global nuclear power infrastructure while controlling the spread of sensitive enrichment and reprocessing technologies that lie at the heart of nuclear fuel supply and nuclear weapons programs. Reducing the latent proliferation risk posed by a broader horizontal spread of enrichment and reprocessing technology has been a primary goal of national nuclear supplier policies since the beginning of the nuclear power age. Attempts to control the spread of sensitive nuclear technology have been the subject of numerous initiatives in the intervening decades sometimes taking the form of calls to develop fuel supply and service assurances to reduce market pull to increase the number of states with fuel cycle capabilities. A clear understanding of what characteristics of specific reliable nuclear fuel service (RNFS) and supply arrangements qualify them as 'attractive offers' is critical to the success of current and future efforts. At a minimum, RNFS arrangements should provide economic value to all participants and help reduce latent proliferation risks posed by the global expansion of nuclear power. In order to inform the technical debate and the development of policy, Pacific Northwest National Laboratory has been developing an analytical framework to evaluate the economics and nonproliferation merits of alternative approaches to RNFS arrangements. This paper provides a brief overview of the economic analysis framework developed and applied to a model problem of current interest: full-service nuclear fuel leasing arrangements. Furthermore, this paper presents an extended outline of a proposed analysis approach to evaluate the non-proliferation merits of various RNFS alternatives.

Crisis Reliability Indicators Supporting Emergency Services (CRISES): A Framework for Developing Performance Measures for Behavioral Health Crisis and Psychiatric Emergency Programs.

Science.gov (United States)

Balfour, Margaret E; Tanner, Kathleen; Jurica, Paul J; Rhoads, Richard; Carson, Chris A

2016-01-01

Crisis and emergency psychiatric services are an integral part of the healthcare system, yet there are no standardized measures for programs providing these services. We developed the Crisis Reliability Indicators Supporting Emergency Services (CRISES) framework to create measures that inform internal performance improvement initiatives and allow comparison across programs. The framework consists of two components-the CRISES domains (timely, safe, accessible, least-restrictive, effective, consumer/family centered, and partnership) and the measures supporting each domain. The CRISES framework provides a foundation for development of standardized measures for the crisis field. This will become increasingly important as pay-for-performance initiatives expand with healthcare reform.

The Turkish adaptation of scale to measure patient perceptions of the quality of nursing care and related hospital services: A validity and reliability study.

Science.gov (United States)

Oren, Besey; Zengin, Neriman; Yildiz, Nebahat

2016-01-01

This study aimed to test the validity and reliability of a version of the tool developed in Sri Lanka in 2011 to assess patient perceptions of the quality of nursing care and related hospital services created for use with Turkish patients. This methodological study was conducted between November 2013 and November 2014 after obtaining ethical approval and organizational permission. Data was collected during discharge from 180 adult patients who were hospitalized for at least 3 days at a medical school hospital located in Istanbul. After language validation, validity and reliability analyses of the scale were conducted. Content validity, content validity index (CVI), construct validity, and exploratory factor analysis were assessed and examined, and reliability was tested using the Cronbach's alpha coefficient and item-total correlations. Mean CVI was found to be 0.95, which is above expected value. Exploratory factor analysis revealed 4 factors with eigenvalues above 1, which explained 82.4% of total variance in the Turkish version of the tool to measure patient perceptions of nursing care and other hospital services. Factor loading for each item was ≥.40. Cronbach's alpha coefficient of sub-dimensions and total scale were found to be 0.84-0.98 and 0.98, respectively. Item-total correlations ranged from 0.56 to 0.83 for the entire group, which was above expected values. The Turkish version of the scale to assess patient perceptions of the quality of nursing care and related hospital services, which comprised 4 sub-dimensions and 36 items, was found to be valid and reliable for use with the Turkish population.

Transmission reliability faces future challenges

International Nuclear Information System (INIS)

Beaty, W.

1993-01-01

The recently published Washington International Energy Group's 1993 Electric Utility Outlook states that nearly one-third (31 percent) of U.S. utility executives expect reliability to decrease in the near future. Electric power system stability is crucial to reliability. Stability analysis determines whether a system will stay intact under normal operating conditions, during minor disturbances such as load fluctuations, and during major disturbances when one or more parts of the system fails. All system elements contribute to reliability or the lack of it. However, this report centers on the transmission segment of the electric system. The North American Electric Reliability Council (NERC) says the transmission systems as planned will be adequate over the next 10 years. However, delays in building new lines and increasing demands for transmission services are serious concerns. Reliability concerns exist in the Mid-Continent Area Power Pool and the Mid-America Interconnected Network regions where transmission facilities have not been allowed to be constructed as planned. Portions of the transmission systems in other regions are loaded at or near their limits. NERC further states that utilities must be allowed to complete planned generation and transmission as scheduled. A reliable supply of electricity also depends on adhering to established operating criteria. Factors that could complicate operations include: More interchange schedules resulting from increased transmission services. Increased line loadings in portions of the transmission systems. Proliferation of non-utility generators

Application of reliability methods in Ontario Hydro

International Nuclear Information System (INIS)

Jeppesen, R.; Ravishankar, T.J.

1985-01-01

Ontario Hydro have established a reliability program in support of its substantial nuclear program. Application of the reliability program to achieve both production and safety goals is described. The value of such a reliability program is evident in the record of Ontario Hydro's operating nuclear stations. The factors which have contributed to the success of the reliability program are identified as line management's commitment to reliability; selective and judicious application of reliability methods; establishing performance goals and monitoring the in-service performance; and collection, distribution, review and utilization of performance information to facilitate cost-effective achievement of goals and improvements. (orig.)

Wurf.it: A Network Coding Reliable Multicast Content Streaming Solution

DEFF Research Database (Denmark)

Hernandez, Nestor; Pihl, Jeppe; Heide, Janus

demonstrator consists of stored simulations with ns-3 in a laptop and a Wurf.it implementation within a WiFi network. For the implementation, a video content from a mobile camera is distributed with low delay using SCORE to a set of heterogenous receivers (e.g. dierent platforms). Use cases of Wurf.it are mild...

Customer control and evaluation of service validity and reliability

NARCIS (Netherlands)

van Raaij, W. Fred; Pruyn, Adriaan T.H.

1998-01-01

A control and attribution model of service production and evaluation is proposed. Service production consists of the stages specification (input), realization (throughput), and outcome (output). Customers may exercise control over all three stages of the service. Critical factors of service

Integration of nondestructive examination reliability and fracture mechanics

International Nuclear Information System (INIS)

Doctor, S.R.; Bates, D.J.; Charlot, L.A.

1985-01-01

The primary pressure boundaries (pressure vessels and piping) of nuclear power plants are in-service inspected (ISI) according to the rules of ASME Boiler and Pressure Vessel Code, Section XI. Ultrasonic techniques are normally used for these inspections, which are periodically performed on a sampling of welds. The Integration of Nondestructive Examination (NDE) Reliability and Fracture Mechanics (FM) Program at Pacific Northwest Laboratory was established to determine the reliability of current ISI techniques and to develop recommendations that will ensure a suitably high inspection reliability. The objectives of this NRC program are to: 1) determine the reliability of ultrasonic ISI performed on commercial light-water reactor primary systems; 2) using probabilistic FM analysis, determine the impact of NDE unreliability on system safety and determine the level of inspection reliability required to ensure a suitably low failure probability; 3) evaluate the degree of reliability improvement that could be achieved using improved and advanced NDE techniques; and 4) based on material properties, service conditions, and NDE uncertainties, formulate recommended revisions to ASME Code, Section XI, and Regulatory Requirements needed to ensure suitably low failure probabilities

TeCo3D: a 3D telecooperation application based on VRML and Java

Science.gov (United States)

Mauve, Martin

1998-12-01

In this paper we present a method for sharing collaboration- unaware VRML content, e.g. 3D models which were not specifically developed for use in a distributed environment. This functionality is an essential requirement for the inclusion of arbitrary VRML content, as generated by standard CAD or animation software, into teleconferencing sessions. We have developed a 3D TeleCooperation (TeCo3D) prototype to demonstrate the feasibility of our approach. The basic services provided by the prototype are the distribution of cooperation unaware VRML content, the sharing of user interactions, and the joint viewing of the content. In order to achieve maximum portability, the prototype was developed completely in Java. This paper presents general aspects of sharing VRML content as well as the concepts, the architecture and the services of the TeCo3D prototype. Our approach relies on existing VRML browsers as the VRML presentation and execution engines while reliable multicast is used as the means of communication to provide for scalability.

Virtually-synchronous communication based on a weak failure suspector

Science.gov (United States)

Schiper, Andre; Ricciardi, Aleta

1993-01-01

Failure detectors (or, more accurately Failure Suspectors (FS)) appear to be a fundamental service upon which to build fault-tolerant, distributed applications. This paper shows that a FS with very weak semantics (i.e., that delivers failure and recovery information in no specific order) suffices to implement virtually-synchronous communication (VSC) in an asynchronous system subject to process crash failures and network partitions. The VSC paradigm is particularly useful in asynchronous systems and greatly simplifies building fault-tolerant applications that mask failures by replicating processes. We suggest a three-component architecture to implement virtually-synchronous communication: (1) at the lowest level, the FS component; (2) on top of it, a component (2a) that defines new views; and (3) a component (2b) that reliably multicasts messages within a view. The issues covered in this paper also lead to a better understanding of the various membership service semantics proposed in recent literature.

Reliability of Wireless Sensor Networks

Science.gov (United States)

Dâmaso, Antônio; Rosa, Nelson; Maciel, Paulo

2014-01-01

Wireless Sensor Networks (WSNs) consist of hundreds or thousands of sensor nodes with limited processing, storage, and battery capabilities. There are several strategies to reduce the power consumption of WSN nodes (by increasing the network lifetime) and increase the reliability of the network (by improving the WSN Quality of Service). However, there is an inherent conflict between power consumption and reliability: an increase in reliability usually leads to an increase in power consumption. For example, routing algorithms can send the same packet though different paths (multipath strategy), which it is important for reliability, but they significantly increase the WSN power consumption. In this context, this paper proposes a model for evaluating the reliability of WSNs considering the battery level as a key factor. Moreover, this model is based on routing algorithms used by WSNs. In order to evaluate the proposed models, three scenarios were considered to show the impact of the power consumption on the reliability of WSNs. PMID:25157553

CLON: Overlay Networks and Gossip Protocols for Cloud Environments

Science.gov (United States)

Matos, Miguel; Sousa, António; Pereira, José; Oliveira, Rui; Deliot, Eric; Murray, Paul

Although epidemic or gossip-based multicast is a robust and scalable approach to reliable data dissemination, its inherent redundancy results in high resource consumption on both links and nodes. This problem is aggravated in settings that have costlier or resource constrained links as happens in Cloud Computing infrastructures composed by several interconnected data centers across the globe.

A Security Architecture for Fault-Tolerant Systems

Science.gov (United States)

1993-06-03

aspect of our effort to achieve better performance is integrating the system into microkernel -based operating systems. 4 Summary and discussion In...135-171, June 1983. [vRBC+92] R. van Renesse, K. Birman, R. Cooper, B. Glade, and P. Stephenson. Reliable multicast between microkernels . In...Proceedings of the USENIX Microkernels and Other Kernel Architectures Workshop, April 1992. 29

Test-retest reliability and agreement of the Satisfaction with the Assistive Technology Services (SATS) instrument in two Nordic countries.

Science.gov (United States)

Sund, Terje; Iwarsson, Susanne; Anttila, Heidi; Helle, Tina; Brandt, Ase

2014-07-01

The purpose of this study was to investigate test-retest reliability, agreement, internal consistency, and floor- and ceiling effects of the Danish and Finnish versions of the Satisfaction with the Assistive Technology Services (SATS) instrument among adult users of powered wheelchairs (PWCs) or powered scooters (scooters). Test-retest design, two telephone interviews 7-18 days apart of 40 informants, with mean age of 67.5 (SD 13.09) years in the Danish; and 54 informants with mean age of 55.6 (SD 12.09) years in the Finnish sample. The intra-class correlation coefficient varied between 0.57 and 0.93 for items in the Danish and between 0.41 and 0.93 in the Finnish sample. The percentage agreement varied between 54.2 and 79.5 for items in the Danish and between 69.2 and 81.1 in the Finnish sample, while the Cronbach's alpha values varied between 0.87 and 0.96 in the two samples. A ceiling effect was found in all items of both samples. This study indicates that the SATS may be reliably administered for telephone interviews among adult PWC and scooter users, and give information about aspects of the service delivery process for quality development improvement purposes. Further psychometric testing of the SATS is required.

Service Degradation in Context Management Frameworks

DEFF Research Database (Denmark)

Shawky, Ahmed; Olsen, Rasmus Løvenstein; Pedersen, Jens Myrup

2011-01-01

information. The paper considers a developed framework from the ICT project, OPEN, and investigates the impact of applying Differentiated Services (DiffServ) Quality of Services (QoS). The paper finally provides insight in how the insight gained can be utilized to ensure reliable remote accessed context......Context aware network services are a new and inter-esting way to enhance network users experience. A context aware application/service enhances network performance in relation to dynamic context information, e.g. mobility, location and device information as it senses and reacts to environment...... changes. The reliability of the information accessed is a key factor in achieving reliable context aware application. This paper will review the service degradation in Context Management Frameworks (CMF) and the effect of high network utilization, with particular focus on the reliability of the accessed...

A study in the reliability analysis method for nuclear power plant structures (I)

Energy Technology Data Exchange (ETDEWEB)

Oh, Byung Hwan; Choi, Seong Cheol; Shin, Ho Sang; Yang, In Hwan; Kim, Yi Sung; Yu, Young; Kim, Se Hun [Seoul, Nationl Univ., Seoul (Korea, Republic of)

1999-03-15

Nuclear power plant structures may be exposed to aggressive environmental effects that may cause their strength and stiffness to decrease over their service life. Although the physics of these damage mechanisms are reasonably well understood and quantitative evaluation of their effects on time-dependent structural behavior is possible in some instances, such evaluations are generally very difficult and remain novel. The assessment of existing steel containment in nuclear power plants for continued service must provide quantitative evidence that they are able to withstand future extreme loads during a service period with an acceptable level of reliability. Rational methodologies to perform the reliability assessment can be developed from mechanistic models of structural deterioration, using time-dependent structural reliability analysis to take loading and strength uncertainties into account. The final goal of this study is to develop the analysis method for the reliability of containment structures. The cause and mechanism of corrosion is first clarified and the reliability assessment method has been established. By introducing the equivalent normal distribution, the procedure of reliability analysis which can determine the failure probabilities has been established. The influence of design variables to reliability and the relation between the reliability and service life will be continued second year research.

A Novel Reliability Enhanced Handoff Method in Future Wireless Heterogeneous Networks

Directory of Open Access Journals (Sweden)

Wang YuPeng

2016-01-01

Full Text Available As the demand increases, future networks will follow the trends of network variety and service flexibility, which requires heterogeneous type of network deployment and reliable communication method. In practice, most communication failure happens due to the bad radio link quality, i.e., high-speed users suffers a lot on the problem of radio link failure, which causes the problem of communication interrupt and radio link recovery. To make the communication more reliable, especially for the high mobility users, we propose a novel communication handoff mechanism to reduce the occurrence of service interrupt. Based on computer simulation, we find that the reliability on the service is greatly improved.

Verification criteria on the reliability of personal dosimetric services from x and gamma radiations; Criteri per la verifica dell'affidabilita di un servizio di dosimetria personale per radiazioni x e gamma

Energy Technology Data Exchange (ETDEWEB)

Borasi, G [Arcisp. S. Maria Nuova, USL 9, Reggio Emilia (Italy); Benco, A [CCE-CCR, Ispra, Varese (Italy); Kaftal, S [CESNEF - Politecnico, Milan (Italy)

1990-07-15

The paper presents the methods used by Working Group ENEA-EDP (Experts in Personal Dosimetry) to control the reliability of the Dosimetric Services operating in Italy and asking for the above controls on voluntary basis. Testing and irradiation test methods are explained as well as the evaluation criteria. The paper includes suggestions and guide-lines to gain the status of 'Reliable Service'. Technical equipment and operating procedures needed to pass the test are also illustrated. (author)

Redefining reliability

International Nuclear Information System (INIS)

Paulson, S.L.

1995-01-01

Want to buy some reliability? The question would have been unthinkable in some markets served by the natural gas business even a few years ago, but in the new gas marketplace, industrial, commercial and even some residential customers have the opportunity to choose from among an array of options about the kind of natural gas service they need--and are willing to pay for. The complexities of this brave new world of restructuring and competition have sent the industry scrambling to find ways to educate and inform its customers about the increased responsibility they will have in determining the level of gas reliability they choose. This article discusses the new options and the new responsibilities of customers, the needed for continuous education, and MidAmerican Energy Company's experiment in direct marketing of natural gas

Reliability-based condition assessment of steel containment and liners

International Nuclear Information System (INIS)

Ellingwood, B.; Bhattacharya, B.; Zheng, R.

1996-11-01

Steel containments and liners in nuclear power plants may be exposed to aggressive environments that may cause their strength and stiffness to decrease during the plant service life. Among the factors recognized as having the potential to cause structural deterioration are uniform, pitting or crevice corrosion; fatigue, including crack initiation and propagation to fracture; elevated temperature; and irradiation. The evaluation of steel containments and liners for continued service must provide assurance that they are able to withstand future extreme loads during the service period with a level of reliability that is sufficient for public safety. Rational methodologies to provide such assurances can be developed using modern structural reliability analysis principles that take uncertainties in loading, strength, and degradation resulting from environmental factors into account. The research described in this report is in support of the Steel Containments and Liners Program being conducted for the US Nuclear Regulatory Commission by the Oak Ridge National Laboratory. The research demonstrates the feasibility of using reliability analysis as a tool for performing condition assessments and service life predictions of steel containments and liners. Mathematical models that describe time-dependent changes in steel due to aggressive environmental factors are identified, and statistical data supporting the use of these models in time-dependent reliability analysis are summarized. The analysis of steel containment fragility is described, and simple illustrations of the impact on reliability of structural degradation are provided. The role of nondestructive evaluation in time-dependent reliability analysis, both in terms of defect detection and sizing, is examined. A Markov model provides a tool for accounting for time-dependent changes in damage condition of a structural component or system. 151 refs

Long term reliability analysis of standby diesel generators

International Nuclear Information System (INIS)

Winfield, D.J.

1988-01-01

The long term reliability of 11 diesel generators of 125 to 250 kV A size has been analysed from 26 years of data base information on individual diesel service as standby power supplies for the Chalk River research reactor facilities. Failure to start on demand and failure to run data is presented and failure by diesel subsystem and multiple failures are also analysed. A brief comparison is made with reliability studies of larger diesel generator units used for standby power service in nuclear power plants. (author)

VPLS: an effective technology for building scalable transparent LAN services

Science.gov (United States)

Dong, Ximing; Yu, Shaohua

2005-02-01

Virtual Private LAN Service (VPLS) is generating considerable interest with enterprises and service providers as it offers multipoint transparent LAN service (TLS) over MPLS networks. This paper describes an effective technology - VPLS, which links virtual switch instances (VSIs) through MPLS to form an emulated Ethernet switch and build Scalable Transparent Lan Services. It first focuses on the architecture of VPLS with Ethernet bridging technique at the edge and MPLS at the core, then it tries to elucidate the data forwarding mechanism within VPLS domain, including learning and aging MAC addresses on a per LSP basis, flooding of unknown frames and replication for unknown, multicast, and broadcast frames. The loop-avoidance mechanism, known as split horizon forwarding, is also analyzed. Another important aspect of VPLS service is its basic operation, including autodiscovery and signaling, is discussed. From the perspective of efficiency and scalability the paper compares two important signaling mechanism, BGP and LDP, which are used to set up a PW between the PEs and bind the PWs to a particular VSI. With the extension of VPLS and the increase of full mesh of PWs between PE devices (n*(n-1)/2 PWs in all, a n2 complete problem), VPLS instance could have a large number of remote PE associations, resulting in an inefficient use of network bandwidth and system resources as the ingress PE has to replicate each frame and append MPLS labels for remote PE. So the latter part of this paper focuses on the scalability issue: the Hierarchical VPLS. Within the architecture of HVPLS, this paper addresses two ways to cope with a possibly large number of MAC addresses, which make VPLS operate more efficiently.

Reliability-based assessment of polyethylene pipe creep lifetime

International Nuclear Information System (INIS)

Khelif, Rabia; Chateauneuf, Alaa; Chaoui, Kamel

2007-01-01

Lifetime management of underground pipelines is mandatory for safe hydrocarbon transmission and distribution systems. The use of high-density polyethylene tubes subjected to internal pressure, external loading and environmental variations requires a reliability study in order to define the service limits and the optimal operating conditions. In service, the time-dependent phenomena, especially creep, take place during the pipe lifetime, leading to significant strength reduction. In this work, the reliability-based assessment of pipe lifetime models is carried out, in order to propose a probabilistic methodology for lifetime model selection and to determine the pipe safety levels as well as the most important parameters for pipeline reliability. This study is enhanced by parametric analysis on pipe configuration, gas pressure and operating temperature

Reliability-based assessment of polyethylene pipe creep lifetime

Energy Technology Data Exchange (ETDEWEB)

Khelif, Rabia [LaMI-UBP and IFMA, Campus de Clermont-Fd, Les Cezeaux, BP 265, 63175 Aubiere Cedex (France); LR3MI, Departement de Genie Mecanique, Universite Badji Mokhtar, BP 12, Annaba 23000 (Algeria)], E-mail: rabia.khelif@ifma.fr; Chateauneuf, Alaa [LGC-University Blaise Pascal, Campus des Cezeaux, BP 206, 63174 Aubiere Cedex (France)], E-mail: alaa.chateauneuf@polytech.univ-bpclermont.fr; Chaoui, Kamel [LR3MI, Departement de Genie Mecanique, Universite Badji Mokhtar, BP 12, Annaba 23000 (Algeria)], E-mail: chaoui@univ-annaba.org

2007-12-15

Lifetime management of underground pipelines is mandatory for safe hydrocarbon transmission and distribution systems. The use of high-density polyethylene tubes subjected to internal pressure, external loading and environmental variations requires a reliability study in order to define the service limits and the optimal operating conditions. In service, the time-dependent phenomena, especially creep, take place during the pipe lifetime, leading to significant strength reduction. In this work, the reliability-based assessment of pipe lifetime models is carried out, in order to propose a probabilistic methodology for lifetime model selection and to determine the pipe safety levels as well as the most important parameters for pipeline reliability. This study is enhanced by parametric analysis on pipe configuration, gas pressure and operating temperature.

power system reliability in supplying nuclear reactors

International Nuclear Information System (INIS)

Gad, M.M.M.

2007-01-01

this thesis presents a simple technique for deducing minimal cut set (MCS) from the defined minimal path set (MPS) of generic distribution system and this technique have been used to evaluate the basic reliability indices of Egypt's second research reactor (ETRR-2) electrical distribution network. the alternative system configurations are then studied to evaluate their impact on service reliability. the proposed MCS approach considers both sustained and temporary outage. the temporary outage constitutes an important parameter in characterizing the system reliability indices for critical load point in distribution system. it is also consider the power quality impact on the reliability indices

Implementasi Wireless Quality of Service dengan Metode Load Switching Jaringan Seluler Menggunakan Software Defined Network untuk Meningkatkan Network Reliability pada Jaringan Dinamis

Directory of Open Access Journals (Sweden)

Yoga Bayu Aji Pranawa

2017-03-01

Full Text Available Wireless Quality of Service (QOS adalah salah satu dimensi mobilitas, yaitu sebuah metode yang digunakan untuk menjaga kualitas suatu jaringan nirkabel. QOS diperlukan sebagai sebuah metode untuk memenuhi kriteria pelayanan sistem bagi pengguna, yaitu confidentiality, integrity, dan availability. Beberapa aspek yang menjadi topik utama dalam QOS adalah failure and recovery mechanism, variable bandwidth, computing distribution, discovery mechanism, variable lantency, dan performance feedback. Wireless yang dibahas pada penelitian ini dititik beratkan pada jaringan seluler yang cenderung tidak reliable pada daerah tertentu. Oleh karena itu dibutuhkan sebuah mekanisme yang dapat mengatasi tidak stabilnya jaringan seluler tersebut. mplementasi mekanisme yang diterapkan pada penelitian ini adalah dengan menerapkan load switching pada jaringan seluler dengan menggunakan beberapa provider dan menerapkan teknologi Software Defined Network (SDN. Berdasarkan hasi uji coba dapat disimpulkan bahwa sistem yang dibuat pada penelitian ini dapat menerapkan wireless quality of service dan meningkatkan network reliability sebesar 65,29% dan 83,87% lebih baik untuk penggunaan tanpa waktu tunggu dan dengan waktu tunggu pada suatu jaringan  dinamis.

A Novel Group Coordination Protocol for Collaborative Multimedia Systems

Science.gov (United States)

1998-01-01

technology have advanced considerably, ef- ficient group coordination support for applications characterized by synchronous and wide-area groupwork is...As a component within a general coordination architecture for many-to-many groupwork , floor control coexists with proto- cols for reliable ordered...multicast and media synchronization at a sub-application level. Orchestration of multiparty groupwork with fine-grained and fair floor control is an

Estimating the Reliability of the Elements of Cloud Services

Directory of Open Access Journals (Sweden)

Iuliia V. Ignatova

2017-01-01

Full Text Available Cloud technologies are a very considerable area that influence IT infrastructure, network services and applications. Research has highlighted difficulties in the functioning of cloud infrastructure. For instance, if a server is subjected to malicious attacks or a force majeure causes a failure in the cloud's service, it is required to determine the time that it takes the system to return to being fully functional after the crash. This will determine the technological and financial risks faced by the owner and end users of cloud services. Therefore, to solve the problem of determining the expected time before service is resumed after a failure, we propose to apply Markovian queuing systems, specifically a model of a multi-channel queuing system with Poisson input flow and denial-of-service (breakdown. (original abstract

Reliability and Validity of Survey Instruments to Measure Work-Related Fatigue in the Emergency Medical Services Setting: A Systematic Review.

Science.gov (United States)

Patterson, P Daniel; Weaver, Matthew D; Fabio, Anthony; Teasley, Ellen M; Renn, Megan L; Curtis, Brett R; Matthews, Margaret E; Kroemer, Andrew J; Xun, Xiaoshuang; Bizhanova, Zhadyra; Weiss, Patricia M; Sequeira, Denisse J; Coppler, Patrick J; Lang, Eddy S; Higgins, J Stephen

2018-02-15

This study sought to systematically search the literature to identify reliable and valid survey instruments for fatigue measurement in the Emergency Medical Services (EMS) occupational setting. A systematic review study design was used and searched six databases, including one website. The research question guiding the search was developed a priori and registered with the PROSPERO database of systematic reviews: "Are there reliable and valid instruments for measuring fatigue among EMS personnel?" (2016:CRD42016040097). The primary outcome of interest was criterion-related validity. Important outcomes of interest included reliability (e.g., internal consistency), and indicators of sensitivity and specificity. Members of the research team independently screened records from the databases. Full-text articles were evaluated by adapting the Bolster and Rourke system for categorizing findings of systematic reviews, and the rated data abstracted from the body of literature as favorable, unfavorable, mixed/inconclusive, or no impact. The Grading of Recommendations, Assessment, Development and Evaluation (GRADE) methodology was used to evaluate the quality of evidence. The search strategy yielded 1,257 unique records. Thirty-four unique experimental and non-experimental studies were determined relevant following full-text review. Nineteen studies reported on the reliability and/or validity of ten different fatigue survey instruments. Eighteen different studies evaluated the reliability and/or validity of four different sleepiness survey instruments. None of the retained studies reported sensitivity or specificity. Evidence quality was rated as very low across all outcomes. In this systematic review, limited evidence of the reliability and validity of 14 different survey instruments to assess the fatigue and/or sleepiness status of EMS personnel and related shift worker groups was identified.

Implementation of IGMP v3 and its application to IPTV carrying network

Science.gov (United States)

Zhou, Min; Dong, Ximing

2008-11-01

IGMP is a host-router signaling protocol, and it is used to manage the membership of Internet Protocol multicast groups for IPv4. IGMPv3 adds "source filtering" function required to support SSM. Firstly, this paper analyses the improvements and implementation of IGMPv3. Secondly, it points out the problems when applying IGMPv3 to IPTV carrying network. Then it presents the solutions by improving IGMPv3 protocol to reduce channel zapping time which is one of the important metrics affecting the QoE in IPTV service. Method to realize the end user authentication, authorization and accounting in the IP multicast security and authentication area by extending the IGMPv3 protocol is described at last.

Integration of NDE Reliability and Fracture Mechanics

Energy Technology Data Exchange (ETDEWEB)

Becker, F. L.; Doctor, S. R.; Heas!er, P. G.; Morris, C. J.; Pitman, S. G.; Selby, G. P.; Simonen, F. A.

1981-03-01

The Pacific Northwest Laboratory is conducting a four-phase program for measuring and evaluating the effectiveness and reliability of in-service inspection (lSI} performed on the primary system piping welds of commercial light water reactors (LWRs). Phase I of the program is complete. A survey was made of the state of practice for ultrasonic rsr of LWR primary system piping welds. Fracture mechanics calculations were made to establish required nondestrutive testing sensitivities. In general, it was found that fatigue flaws less than 25% of wall thickness would not grow to failure within an inspection interval of 10 years. However, in some cases failure could occur considerably faster. Statistical methods for predicting and measuring the effectiveness and reliability of lSI were developed and will be applied in the "Round Robin Inspections" of Phase II. Methods were also developed for the production of flaws typical of those found in service. Samples fabricated by these methods wilI be used in Phase II to test inspection effectiveness and reliability. Measurements were made of the influence of flaw characteristics {i.e., roughness, tightness, and orientation) on inspection reliability. These measurernents, as well as the predictions of a statistical model for inspection reliability, indicate that current reporting and recording sensitivities are inadequate.

Reliability and protection against failure in computer systems

International Nuclear Information System (INIS)

Daniels, B.K.

1979-01-01

Computers are being increasingly integrated into the control and safety systems of large and potentially hazardous industrial processes. This development introduces problems which are particular to computer systems and opens the way to new techniques of solving conventional reliability and availability problems. References to the developing fields of software reliability, human factors and software design are given, and these subjects are related, where possible, to the quantified assessment of reliability. Original material is presented in the areas of reliability growth and computer hardware failure data. The report draws on the experience of the National Centre of Systems Reliability in assessing the capability and reliability of computer systems both within the nuclear industry, and from the work carried out in other industries by the Systems Reliability Service. (author)

Long-term reliability evaluation of nuclear containments with tendon force degradation

International Nuclear Information System (INIS)

Kim, Sang-Hyo; Choi, Moon-Seock; Joung, Jung-Yeun; Kim, Kun-Soo

2013-01-01

Highlights: • A probabilistic model on long-term degradation of tendon force is developed. • By using the model, we performed reliability evaluation of nuclear containment. • The analysis is also performed for the case with the strict maintenance programme. • We showed how to satisfy the target safety in the containments facing life extension. - Abstract: The long-term reliability of nuclear containment is important for operating nuclear power plants. In particular, long-term reliability should be clarified when the service life of nuclear containment is being extended. This study focuses not only on determining the reliability of nuclear containment but also presenting the reliability improvement by strengthening the containment itself or by running a strict maintenance programme. The degradation characteristics of tendon force are estimated from the data recorded during in-service inspection of containments. A reliability analysis is conducted for a limit state of through-wall cracking, which is conservative, but most crucial limit state. The results of this analysis indicate that reliability is the lowest at 3/4 height of the containment wall. Therefore, this location is the most vulnerable for the specific limit state considered in this analysis. Furthermore, changes in structural reliability owing to an increase in the number of inspecting tendons are analysed for verifying the effect of the maintenance program's intensity on expected containment reliability. In the last part of this study, an example of obtaining target reliability of nuclear containment by strengthening its structural resistance is presented. A case study is conducted for exemplifying the effect of strengthening work on containment reliability, especially during extended service life

On the Throughput and Energy Benefits of Network Coded Cooperation

DEFF Research Database (Denmark)

Hernandez, Nestor; Heide, Janus; Roetter, Daniel Enrique Lucani

2014-01-01

Cooperative techniques in wireless mobile networks typically leverage short-range communication technologies, e.g., WiFi, to allow data exchange between devices forming a mobile cloud. These mobile clouds have been considered as a key to reduce the cost of multicast services for the network...

Multiresolution with Hierarchical Modulations for Long Term Evolution of UMTS

Directory of Open Access Journals (Sweden)

Soares Armando

2009-01-01

Full Text Available In the Long Term Evolution (LTE of UMTS the Interactive Mobile TV scenario is expected to be a popular service. By using multiresolution with hierarchical modulations this service is expected to be broadcasted to larger groups achieving significant reduction in power transmission or increasing the average throughput. Interactivity in the uplink direction will not be affected by multiresolution in the downlink channels, since it will be supported by dedicated uplink channels. The presence of interactivity will allow for a certain amount of link quality feedback for groups or individuals. As a result, an optimization of the achieved throughput will be possible. In this paper system level simulations of multi-cellular networks considering broadcast/multicast transmissions using the OFDM/OFDMA based LTE technology are presented to evaluate the capacity, in terms of number of TV channels with given bit rates or total spectral efficiency and coverage. multiresolution with hierarchical modulations is presented to evaluate the achievable throughput gain compared to single resolution systems of Multimedia Broadcast/Multicast Service (MBMS standardised in Release 6.

Guarantee of reliability of devices complexes for plastic tube welding

International Nuclear Information System (INIS)

Voskresenskij, L.A.; Zajtsev, A.I.; Nelyubov, V.I.; Fedorov, M.A.

1988-01-01

Results of calculations and experimental studies on providing reliability of complex for plastic tube welding are presented. Choice of reliability indeces and standards is based. Reliability levels of components are determined. The most waded details are calculated. It is shown that they meet the reqrurements of strength and reliability. Service life tests supported the correct choice of springs. Recommendations on elevating reliability are given. Directions of further developments are shown. 8 refs.; 2 figs.; 1 tab

Automation Hooks Architecture Trade Study for Flexible Test Orchestration

Science.gov (United States)

Lansdowne, Chatwin A.; Maclean, John R.; Graffagnino, Frank J.; McCartney, Patrick A.

2010-01-01

We describe the conclusions of a technology and communities survey supported by concurrent and follow-on proof-of-concept prototyping to evaluate feasibility of defining a durable, versatile, reliable, visible software interface to support strategic modularization of test software development. The objective is that test sets and support software with diverse origins, ages, and abilities can be reliably integrated into test configurations that assemble and tear down and reassemble with scalable complexity in order to conduct both parametric tests and monitored trial runs. The resulting approach is based on integration of three recognized technologies that are currently gaining acceptance within the test industry and when combined provide a simple, open and scalable test orchestration architecture that addresses the objectives of the Automation Hooks task. The technologies are automated discovery using multicast DNS Zero Configuration Networking (zeroconf), commanding and data retrieval using resource-oriented Restful Web Services, and XML data transfer formats based on Automatic Test Markup Language (ATML). This open-source standards-based approach provides direct integration with existing commercial off-the-shelf (COTS) analysis software tools.

Parametric Mass Reliability Study

Science.gov (United States)

Holt, James P.

2014-01-01

The International Space Station (ISS) systems are designed based upon having redundant systems with replaceable orbital replacement units (ORUs). These ORUs are designed to be swapped out fairly quickly, but some are very large, and some are made up of many components. When an ORU fails, it is replaced on orbit with a spare; the failed unit is sometimes returned to Earth to be serviced and re-launched. Such a system is not feasible for a 500+ day long-duration mission beyond low Earth orbit. The components that make up these ORUs have mixed reliabilities. Components that make up the most mass-such as computer housings, pump casings, and the silicon board of PCBs-typically are the most reliable. Meanwhile components that tend to fail the earliest-such as seals or gaskets-typically have a small mass. To better understand the problem, my project is to create a parametric model that relates both the mass of ORUs to reliability, as well as the mass of ORU subcomponents to reliability.

Reliability Evaluation on Creep Life Prediction of Alloy 617 for a Very High Temperature Reactor

International Nuclear Information System (INIS)

Kim, Woo-Gon; Hong, Sung-Deok; Kim, Yong-Wan; Park, Jae-Young; Kim, Seon-Jin

2012-01-01

This paper evaluates the reliability of creep rupture life under service conditions of Alloy 617, which is considered as one of the candidate materials for use in a very high temperature reactor (VHTR) system. A Z-parameter, which represents the deviation of creep rupture data from the master curve, was used for the reliability analysis of the creep rupture data of Alloy 617. A Service-condition Creep Rupture Interference (SCRI) model, which can consider both the scattering of the creep rupture data and the fluctuations of temperature and stress under any service conditions, was also used for evaluating the reliability of creep rupture life. The statistical analysis showed that the scattering of creep rupture data based on Z-parameter was supported by normal distribution. The values of reliability decreased rapidly with increasing amplitudes of temperature and stress fluctuations. The results established that the reliability decreased with an increasing service time.

LON Technology in Wireless Sensor Networking Applications

Directory of Open Access Journals (Sweden)

Ryszard Golanski

2006-01-01

Full Text Available In the paper a discussion on how to optimize LonWorks/EIA-709 sensornetworking technology for wireless applications, in presented. Main solutions offered byLocal Operating Networks (LON, LonWorks platform attractive for wirelesscommunication, that is, the send-on-delta concept and the sleep mode, are displayed. Thepredictive p-persistent CSMA MAC protocol constituting the heart of the communicationcapability of LON networks is analysed in detail. Next, the message services are described,and the analytical evaluation of delivery reliability is derived. Performance evaluation basedon simulation results for unicast traffic is presented first. In order to highlight the robustnessof the predictive CSMA to overload situations, the saturation performance for a general caseload scenario including multicast transactions is reported. The methods of effectivemanagement of energy consumption in LonWorks networks are discussed. Finally, the LONdesign tradeoffs are summarized.

Evaluating the Validity and Reliability of Customer Quality Questionnaire from the Experts’ and Customers’ Perspective in Services Related to Patients With Inflammatory Bowel Disease

Directory of Open Access Journals (Sweden)

Roya Hasanzadeh

2015-08-01

Full Text Available ​ Background and Objectives : Customer Quality refers to   customers’ capabilities to be effectively participating in service delivery and correct care processes. The aim of this study was to evaluate the validity and reliability of customer quality questionnaire in services related to  patients with Inflammatory Bowel Disease. Material and Methods : This is a qualitative study with the aim of assessment of customer quality questionnaire with 16 questions. This questionnaire was distributed among 11 experts to determine the validity of the questionnaire. Finally, 10 of them expressed their own opinions based on the criteria of validity and in the face validity section , they expressed their opinions qualitatively. Also, reliability of questionnaire was reviewed with 30 samples, according to the internal consistency. Results : In determining the content validity, all the questionnaire items were confirmed by CVR (1 and CVI (0.89 indicators. Also, reliability of the questionnaire was confirmed by Cronbach’s alpha (α=0.78.The final questionnaire was changed according to the experts’ recommendations and their qualitative comments on the 19 questions in four stages of customer quality, including: a the patient’s belief that his/her role in care process is important, b having knowledge, skill and confidence to take action in the care process, c  taking action to protect and improve the health or active involvement, d continuity of care, even in critical situations and under stress. Conclusion : Confirmation of the questionnaire with statistical scientific methods showed that this questionnaire is a very strong tool that using it in research can be an effective step in order to improve the quality of health services.

CASTOR: Widely Distributed Scalable Infospaces

Science.gov (United States)

2008-11-01

Symposium on Networked System Design and Implementation (NSDI 08). San Francisco , CA. April 2008. Gossip-based Distribution Estimation in Peer-to...and S. Paul. RMTP: A reliable multicast transport protocol. In INFOCOM, pages 1414–1424, San Francisco , CA, Mar. 1996. [22] T. Montgomery, B. Whetten...Fast approx- imate reconciliation of set differences. Boston University Computer Science Technical Report 2002-019., 2002. [5] L. Camargos , F. Pedone

System reliability developments in structural engineering

International Nuclear Information System (INIS)

Moses, F.

1982-01-01

Two major limitations occur in present structural design code developments utilizing reliability theory. The notional system reliabilities may differ significantly from calibrated component reliabilities. Secondly, actual failures are often due to gross errors not reflected in most present code formats. A review is presented of system reliability methods and further new concepts are developed. The incremental load approach for identifying and expressing collapse modes is expanded by employing a strategy to identify and enumerate the significant structural collapse modes. It further isolates the importance of critical components in the system performance. Ductile and brittle component behavior and strength correlation is reflected in the system model and illustrated in several examples. Modal combinations for the system reliability are also reviewed. From these developments a system factor can be addended to component safety checking equations. Values may be derived from system behavior by substituting in a damage model which accounts for the response range from component failure to collapse. Other strategies are discussed which emphasize quality assurance during design and in-service inspection for components whose behavior is critical to the system reliability. (Auth.)

Reliability and continuous regeneration model

Directory of Open Access Journals (Sweden)

Anna Pavlisková

2006-06-01

Full Text Available The failure-free function of an object is very important for the service. This leads to the interest in the determination of the object reliability and failure intensity. The reliability of an element is defined by the theory of probability.The element durability T is a continuous random variate with the probability density f. The failure intensity (tλ is a very important reliability characteristics of the element. Often it is an increasing function, which corresponds to the element ageing. We disposed of the data about a belt conveyor failures recorded during the period of 90 months. The given ses behaves according to the normal distribution. By using a mathematical analysis and matematical statistics, we found the failure intensity function (tλ. The function (tλ increases almost linearly.

Reliability demonstration methodology for products with Gamma Process by optimal accelerated degradation testing

International Nuclear Information System (INIS)

Zhang, Chunhua; Lu, Xiang; Tan, Yuanyuan; Wang, Yashun

2015-01-01

For products with high reliability and long lifetime, accelerated degradation testing (ADT) may be adopted during product development phase to verify whether its reliability satisfies the predetermined level within feasible test duration. The actual degradation from engineering is usually a strictly monotonic process, such as fatigue crack growth, wear, and erosion. However, the method for reliability demonstration by ADT with monotonic degradation process has not been investigated so far. This paper proposes a reliability demonstration methodology by ADT for this kind of product. We first apply Gamma process to describe the monotonic degradation. Next, we present a reliability demonstration method by converting the required reliability level into allowable cumulative degradation in ADT and comparing the actual accumulative degradation with the allowable level. Further, we suggest an analytical optimal ADT design method for more efficient reliability demonstration by minimizing the asymptotic variance of decision variable in reliability demonstration under the constraints of sample size, test duration, test cost, and predetermined decision risks. The method is validated and illustrated with example on reliability demonstration of alloy product, and is applied to demonstrate the wear reliability within long service duration of spherical plain bearing in the end. - Highlights: • We present a reliability demonstration method by ADT for products with monotonic degradation process, which may be applied to verify reliability with long service life for products with monotonic degradation process within feasible test duration. • We suggest an analytical optimal ADT design method for more efficient reliability demonstration, which differs from the existed optimal ADT design for more accurate reliability estimation by different objective function and different constraints. • The methods are applied to demonstrate the wear reliability within long service duration of

Providing Reliability Services through Demand Response: A Prelimnary Evaluation of the Demand Response Capabilities of Alcoa Inc.

Energy Technology Data Exchange (ETDEWEB)

Starke, Michael R [ORNL; Kirby, Brendan J [ORNL; Kueck, John D [ORNL; Todd, Duane [Alcoa; Caulfield, Michael [Alcoa; Helms, Brian [Alcoa

2009-02-01

Demand response is the largest underutilized reliability resource in North America. Historic demand response programs have focused on reducing overall electricity consumption (increasing efficiency) and shaving peaks but have not typically been used for immediate reliability response. Many of these programs have been successful but demand response remains a limited resource. The Federal Energy Regulatory Commission (FERC) report, 'Assessment of Demand Response and Advanced Metering' (FERC 2006) found that only five percent of customers are on some form of demand response program. Collectively they represent an estimated 37,000 MW of response potential. These programs reduce overall energy consumption, lower green house gas emissions by allowing fossil fuel generators to operate at increased efficiency and reduce stress on the power system during periods of peak loading. As the country continues to restructure energy markets with sophisticated marginal cost models that attempt to minimize total energy costs, the ability of demand response to create meaningful shifts in the supply and demand equations is critical to creating a sustainable and balanced economic response to energy issues. Restructured energy market prices are set by the cost of the next incremental unit of energy, so that as additional generation is brought into the market, the cost for the entire market increases. The benefit of demand response is that it reduces overall demand and shifts the entire market to a lower pricing level. This can be very effective in mitigating price volatility or scarcity pricing as the power system responds to changing demand schedules, loss of large generators, or loss of transmission. As a global producer of alumina, primary aluminum, and fabricated aluminum products, Alcoa Inc., has the capability to provide demand response services through its manufacturing facilities and uniquely through its aluminum smelting facilities. For a typical aluminum smelter

Reliable LED Lighting Technologies: Key Factors and Procurement Guidance

Energy Technology Data Exchange (ETDEWEB)

Davis, Lynn; Arquit Niederberger, Anne

2015-10-08

Abstract— Lighting systems have the ability to transform the economic and educational infrastructure of disadvantaged communities, and eradicating “light poverty” has become one of the primary goals of the International Year of Light 2015. Solid-state lighting (SSL) technology, based on light-emitting diode (LED) light sources, has emerged as the next generation of lighting technology, with a current global market penetration of roughly 5%. This paper will report on recent research on understanding SSL lighting system reliability (failure modes, environmental stressors, electrical power quality); discuss the implications of SSL technology reliability for providing lighting services; and suggest practical approaches to ensure SSL reliability to benefit humanity. Among the key findings from this work is that LED sources can be extremely reliable, withstanding a broad range of environmental stresses without failure. Nonetheless, SSL lighting systems can have a negative impact on electrical power reliability, as well as on the affordability of lighting services, without attention to the quality of the accompanying power infrastructure. It is therefore critical to ensure that the performance of the power supply electronics used in lighting systems is matched to the quality of the power source, when evaluating energy efficient lighting choices.

78 FR 69018 - Improving the Resiliency of Mobile Wireless Communications Networks; Reliability and Continuity...

Science.gov (United States)

2013-11-18

... consumers value overall network reliability and quality in selecting mobile wireless service providers, they...-125] Improving the Resiliency of Mobile Wireless Communications Networks; Reliability and Continuity... (Reliability NOI) in 2011 to ``initiate a comprehensive examination of issues regarding the reliability...

Exploring the relationship between service quality and customer satisfaction in postal financial service

Directory of Open Access Journals (Sweden)

Steven K Msosa

2015-09-01

Full Text Available Service quality and customer satisfaction are related and are important factors for the success of service providers be it in the public or the private sector. This study aims to examine the relationship between service quality and customer satisfaction in the Malawian public postal service, specifically its banking division. A cross-sectional, quantitative and descriptive study was undertaken and data was collected from 400 customers using the SERVPERF model. A non-probability sampling approach was adopted and respondents were selected using convenience sampling. Reliability of the study was tested using Cronbach alpha. Correlation tests were conducted using Spearman’s rho. The results show that all the five service quality dimensions, viz. tangibles, reliability, empathy, assurance and responsiveness, are significantly and positively correlated. There was also a significant correlation between the service quality dimensions and overall service quality, customer satisfaction and customer loyalty

Research on Collaborative Technology in Distributed Virtual Reality System

Science.gov (United States)

Lei, ZhenJiang; Huang, JiJie; Li, Zhao; Wang, Lei; Cui, JiSheng; Tang, Zhi

2018-01-01

Distributed virtual reality technology applied to the joint training simulation needs the CSCW (Computer Supported Cooperative Work) terminal multicast technology to display and the HLA (high-level architecture) technology to ensure the temporal and spatial consistency of the simulation, in order to achieve collaborative display and collaborative computing. In this paper, the CSCW’s terminal multicast technology has been used to modify and expand the implementation framework of HLA. During the simulation initialization period, this paper has used the HLA statement and object management service interface to establish and manage the CSCW network topology, and used the HLA data filtering mechanism for each federal member to establish the corresponding Mesh tree. During the simulation running period, this paper has added a new thread for the RTI and the CSCW real-time multicast interactive technology into the RTI, so that the RTI can also use the window message mechanism to notify the application update the display screen. Through many applications of submerged simulation training in substation under the operation of large power grid, it is shown that this paper has achieved satisfactory training effect on the collaborative technology used in distributed virtual reality simulation.

A heuristic-based approach for reliability importance assessment of energy producers

International Nuclear Information System (INIS)

Akhavein, A.; Fotuhi Firuzabad, M.

2011-01-01

Reliability of energy supply is one of the most important issues of service quality. On one hand, customers usually have different expectations for service reliability and price. On the other hand, providing different level of reliability at load points is a challenge for system operators. In order to take reasonable decisions and obviate reliability implementation difficulties, market players need to know impacts of their assets on system and load-point reliabilities. One tool to specify reliability impacts of assets is the criticality or reliability importance measure by which system components can be ranked based on their effect on reliability. Conventional methods for determination of reliability importance are essentially on the basis of risk sensitivity analysis and hence, impose prohibitive calculation burden in large power systems. An approach is proposed in this paper to determine reliability importance of energy producers from perspective of consumers or distribution companies in a composite generation and transmission system. In the presented method, while avoiding immense computational burden, the energy producers are ranked based on their rating, unavailability and impact on power flows in the lines connecting to the considered load points. Study results on the IEEE reliability test system show successful application of the proposed method. - Research highlights: → Required reliability level at load points is a concern in modern power systems. → It is important to assess reliability importance of energy producers or generators. → Generators can be ranked based on their impacts on power flow to a selected area. → Ranking of generators is an efficient tool to assess their reliability importance.

An automated method for estimating reliability of grid systems using Bayesian networks

International Nuclear Information System (INIS)

Doguc, Ozge; Emmanuel Ramirez-Marquez, Jose

2012-01-01

Grid computing has become relevant due to its applications to large-scale resource sharing, wide-area information transfer, and multi-institutional collaborating. In general, in grid computing a service requests the use of a set of resources, available in a grid, to complete certain tasks. Although analysis tools and techniques for these types of systems have been studied, grid reliability analysis is generally computation-intensive to obtain due to the complexity of the system. Moreover, conventional reliability models have some common assumptions that cannot be applied to the grid systems. Therefore, new analytical methods are needed for effective and accurate assessment of grid reliability. This study presents a new method for estimating grid service reliability, which does not require prior knowledge about the grid system structure unlike the previous studies. Moreover, the proposed method does not rely on any assumptions about the link and node failure rates. This approach is based on a data-mining algorithm, the K2, to discover the grid system structure from raw historical system data, that allows to find minimum resource spanning trees (MRST) within the grid then, uses Bayesian networks (BN) to model the MRST and estimate grid service reliability.

Internet technologies and requirements for telemedicine

Science.gov (United States)

Lamaster, H.; Meylor, J.; Meylor, F.

1997-01-01

Internet technologies are briefly introduced and those applicable for telemedicine are reviewed. Multicast internet technologies are described. The National Aeronautics and Space Administration (NASA) 'Telemedicine Space-bridge to Russia' project is described and used to derive requirements for internet telemedicine. Telemedicine privacy and Quality of Service (QoS) requirements are described.

[Validity and reliability of the Culture of Quality Health Services questionnaire in Mexico].

Science.gov (United States)

Herrera-Kiengelher, L; Zepeda-Zaragoza, J; Austria-Corrales, F; Vázquez-Zarate, V M

2013-01-01

Patient Safety is a major public health problem worldwide and is responsibility of all those involved in health care. Establishing a Safety Culture has proved to be a factor that favors the integration of work teams, communication and construction of clear procedures in various organizations. Promote a culture of safety depends on several factors, such as organization, work unit and staff. Objective assessment of these factors will help to identify areas for improvement and establish strategic lines of action. [corrected] To adapt, validate and calibrate the questionnaire Culture of Quality in Health Services (CQHS) in Mexican population. A cross with a stratified representative sample of 522 health workers. The questionnaire was translated and adapted from Singer's. Content was validated by experts, internal consistency, confirmatory factorial validity and item calibration with Samejima's Graded Response Model. Convergent and divergent construct validity was confirmed from the CQHS, item calibration showed that the questionnaire is able to discriminate between patients and represent different levels of the hypothesized dimensions with greater accuracy and lower standard error. The CQHS is a valid and reliable instrument to assess patient safety culture in hospitals in Mexico. Copyright © 2013 SECA. Published by Elsevier Espana. All rights reserved.

Assessment of physical server reliability in multi cloud computing system

Science.gov (United States)

Kalyani, B. J. D.; Rao, Kolasani Ramchand H.

2018-04-01

Business organizations nowadays functioning with more than one cloud provider. By spreading cloud deployment across multiple service providers, it creates space for competitive prices that minimize the burden on enterprises spending budget. To assess the software reliability of multi cloud application layered software reliability assessment paradigm is considered with three levels of abstractions application layer, virtualization layer, and server layer. The reliability of each layer is assessed separately and is combined to get the reliability of multi-cloud computing application. In this paper, we focused on how to assess the reliability of server layer with required algorithms and explore the steps in the assessment of server reliability.

Optimal Service Distribution in WSN Service System Subject to Data Security Constraints

Science.gov (United States)

Wu, Zhao; Xiong, Naixue; Huang, Yannong; Gu, Qiong

2014-01-01

Services composition technology provides a flexible approach to building Wireless Sensor Network (WSN) Service Applications (WSA) in a service oriented tasking system for WSN. Maintaining the data security of WSA is one of the most important goals in sensor network research. In this paper, we consider a WSN service oriented tasking system in which the WSN Services Broker (WSB), as the resource management center, can map the service request from user into a set of atom-services (AS) and send them to some independent sensor nodes (SN) for parallel execution. The distribution of ASs among these SNs affects the data security as well as the reliability and performance of WSA because these SNs can be of different and independent specifications. By the optimal service partition into the ASs and their distribution among SNs, the WSB can provide the maximum possible service reliability and/or expected performance subject to data security constraints. This paper proposes an algorithm of optimal service partition and distribution based on the universal generating function (UGF) and the genetic algorithm (GA) approach. The experimental analysis is presented to demonstrate the feasibility of the suggested algorithm. PMID:25093346

The influence of frequency and reliability of in-service inspection on reactor pressure vessel disruptive failure probability

International Nuclear Information System (INIS)

Jordan, G.M.

1977-01-01

A simple probabilistic methodology is used to investigate the benefit, in terms of reduction of disruptive failure probability, which comes from the application of periodic In Service Inspection (ISI) to nuclear pressure vessels. The analysis indicates the strong interaction between inspection benefit and the intrinsic quality of the structure. In order to quantify the inspection benefit, assumptions are made which allow the quality to be characterized in terms of the parameters governing a Log Normal distribution of time-to-failure. Using these assumptions, it is shown that the overall benefit of ISI is unlikely to exceed an order of magnitude in terms of reduction of disruptive failure probability. The method is extended to evaluate the effect of the periodicity and reliability of the inspection process itself. (author)

Design and Analysis of Transport Protocols for Reliable High-Speed Communications

NARCIS (Netherlands)

Oláh, A.

1997-01-01

The design and analysis of transport protocols for reliable communications constitutes the topic of this dissertation. These transport protocols guarantee the sequenced and complete delivery of user data over networks which may lose, duplicate and reorder packets. Reliable transport services are

Impact of inservice inspection on the reliability of nuclear piping

International Nuclear Information System (INIS)

Woo, H.H.

1983-12-01

The reliability of nuclear piping is a function of piping quality as fabricated, service loadings and environments, plus programs of continuing inspection during operation. This report presents the results of a study of the impact of inservice inspection (ISI) programs on the reliability of specific nuclear piping systems that have actually failed in service. Two major factors are considered in the ISI programs: one is the capability of detecting flaws; the other is the frequency of performing ISI. A probabilistic fracture mechanics model issued to estimate the reliability of two nuclear piping lines over the plant life as functions of the ISI programs. Examples chosen for the study are the PWR feedwater steam generator nozzle cracking incident and the BWR recirculation reactor vessel nozzle safe-end cracking incident

SEQUenCE: a service user-centred quality of care instrument for mental health services.

Science.gov (United States)

Hester, Lorraine; O'Doherty, Lorna Jane; Schnittger, Rebecca; Skelly, Niamh; O'Donnell, Muireann; Butterly, Lisa; Browne, Robert; Frorath, Charlotte; Morgan, Craig; McLoughlin, Declan M; Fearon, Paul

2015-08-01

To develop a quality of care instrument that is grounded in the service user perspective and validate it in a mental health service. The instrument (SEQUenCE (SErvice user QUality of CarE)) was developed through analysis of focus group data and clinical practice guidelines, and refined through field-testing and psychometric analyses. All participants were attending an independent mental health service in Ireland. Participants had a diagnosis of bipolar affective disorder (BPAD) or a psychotic disorder. Twenty-nine service users participated in six focus group interviews. Seventy-one service users participated in field-testing: 10 judged the face validity of an initial 61-item instrument; 28 completed a revised 52-item instrument from which 12 items were removed following test-retest and convergent validity analyses; 33 completed the resulting 40-item instrument. Test-retest reliability, internal consistency and convergent validity of the instrument. The final instrument showed acceptable test-retest reliability at 5-7 days (r = 0.65; P Service Satisfaction Scale (r = 0.84, P internal consistency (Cronbach's alpha = 0.87). SEQUenCE is a valid, reliable scale that is grounded in the service user perspective and suitable for routine use. It may serve as a useful tool in individual care planning, service evaluation and research. The instrument was developed and validated with service users with a diagnosis of either BPAD or a psychotic disorder; it does not yet have established external validity for other diagnostic groups. © The Author 2015. Published by Oxford University Press in association with the International Society for Quality in Health Care; all rights reserved.

Reliability and safety of nuclear power stations

International Nuclear Information System (INIS)

Stepanek, S.

1979-01-01

The main problems are briefly discussed associated with the assessment of the safety and reliability of reactor pressure vessels. Two approaches are being applied to the assessment: one is based on the crack arrest temperature, the other on the determination of conditions corresponding to brittle fracture formation and on the determination of the critical defect size. The importance is stressed of continuous in-service inspection which may increase the factor of reliability by up to 10 4 times. (Z.M.)

Reliability assessment of creep rupture life for Gr. 91 steel

International Nuclear Information System (INIS)

Kim, Woo-Gon; Park, Jae-Young; Kim, Seon-Jin; Jang, Jinsung

2013-01-01

Highlights: • Statistical analysis of a number of creep rupture data based on Z parameter. • Determination of the constant C in LM parameter and long-term creep life prediction. • Generation of random variables for Z s and Z cr by Monte-Carlo simulation in a SCRI model. • Examples for design application were reasonably drawn from the viewpoints of reliability. - Abstract: This paper presents reliability assessment of the long-term creep life of Gr. 91 steel, which is a major structural material for high temperature structural components of Generation-IV reactor systems. A number of creep rupture data for Gr. 91 steel were collected through literature surveys, and the long-term creep life was predicted by Larson–Miller parameter. A “Z parameter” method was used to describe the magnitude of the deviation of the creep rupture data to a master curve. A “Service Condition-creep Rupture property Interference (SCRI) model” based on the Z parameter was used to simultaneously consider the scattering of the creep rupture data of materials and the fluctuations of service conditions in reliability assessment. A statistical analysis of the creep rupture data was conducted by the Z parameter. To carry out the SCRI model, a number of random variables for Z s describing service conditions and Z cr describing the dispersion of the creep rupture data were generated using a Monte-Carlo simulation technique. As examples for application, the creep rupture life under a certain service conditions of Gr. 91 steel was reasonably drawn from the viewpoints of reliability

System Reliability Evaluation of Data Transmission in Commercial Banks with Multiple Branches

Directory of Open Access Journals (Sweden)

Yi-Kuei Lin

2014-01-01

Full Text Available The main purpose of this paper is to assess the system reliability of electronic transaction data transmissions made by commercial banks in terms of stochastic flow network. System reliability is defined as the probability of demand satisfaction and it can be used to measure quality of service. In this paper, we study the system reliability of data transmission from the headquarters of a commercial bank to its multiple branches. The network structure of the bank and the probability of successful data transmission are obtained through the collection of real data. The system reliability, calculated using the minimal path method and the recursive sum of disjoint products algorithm, provides banking managers with a view to comprehend the current state of the entire system. Besides, the system reliability can be used not only as a measurement of quality of service, but also an improvement reference of the system by adopting sensitivity analysis.

Scalable Active Optical Access Network Using Variable High-Speed PLZT Optical Switch/Splitter

Science.gov (United States)

Ashizawa, Kunitaka; Sato, Takehiro; Tokuhashi, Kazumasa; Ishii, Daisuke; Okamoto, Satoru; Yamanaka, Naoaki; Oki, Eiji

This paper proposes a scalable active optical access network using high-speed Plumbum Lanthanum Zirconate Titanate (PLZT) optical switch/splitter. The Active Optical Network, called ActiON, using PLZT switching technology has been presented to increase the number of subscribers and the maximum transmission distance, compared to the Passive Optical Network (PON). ActiON supports the multicast slot allocation realized by running the PLZT switch elements in the splitter mode, which forces the switch to behave as an optical splitter. However, the previous ActiON creates a tradeoff between the network scalability and the power loss experienced by the optical signal to each user. It does not use the optical power efficiently because the optical power is simply divided into 0.5 to 0.5 without considering transmission distance from OLT to each ONU. The proposed network adopts PLZT switch elements in the variable splitter mode, which controls the split ratio of the optical power considering the transmission distance from OLT to each ONU, in addition to PLZT switch elements in existing two modes, the switching mode and the splitter mode. The proposed network introduces the flexible multicast slot allocation according to the transmission distance from OLT to each user and the number of required users using three modes, while keeping the advantages of ActiON, which are to support scalable and secure access services. Numerical results show that the proposed network dramatically reduces the required number of slots and supports high bandwidth efficiency services and extends the coverage of access network, compared to the previous ActiON, and the required computation time for selecting multicast users is less than 30msec, which is acceptable for on-demand broadcast services.

Service Quality and Non-Muslim Satisfaction Using Sharia Bank Products and Services

Directory of Open Access Journals (Sweden)

Nova Ch Mamuaya

2018-01-01

Full Text Available Some studies show that religious belief does not take effect affecting consumer using sharia bank products and services. This research has implemented six dimensions of Othman and Owen which modified five dimensions of Parasuraman with adding compliance dimension. The six dimensions of Othman & Owen are known as CARTER (compliance, assurance, reliability, tangible, empathy, and responsiveness. The research purpose is to analyze compliance, assurance, reliability, tangible, empathy, and responsiveness effect on non-Muslim customer satisfaction on sharia bank products and services at Manado Sulawesi Utara partially or simultaneously. The data was gathered with questionnaire instruments of 70 respondents, measured with five Likert scale five dots. The research result shows compliance, assurance, reliability, tangible, empathy, and responsiveness has significant effect on customer satisfaction. Responsive has most strong effect and compliance is the weakest.

How reliable are Functional Movement Screening scores? A systematic review of rater reliability.

Science.gov (United States)

Moran, Robert W; Schneiders, Anthony G; Major, Katherine M; Sullivan, S John

2016-05-01

Several physical assessment protocols to identify intrinsic risk factors for injury aetiology related to movement quality have been described. The Functional Movement Screen (FMS) is a standardised, field-expedient test battery intended to assess movement quality and has been used clinically in preparticipation screening and in sports injury research. To critically appraise and summarise research investigating the reliability of scores obtained using the FMS battery. Systematic literature review. Systematic search of Google Scholar, Scopus (including ScienceDirect and PubMed), EBSCO (including Academic Search Complete, AMED, CINAHL, Health Source: Nursing/Academic Edition), MEDLINE and SPORTDiscus. Studies meeting eligibility criteria were assessed by 2 reviewers for risk of bias using the Quality Appraisal of Reliability Studies checklist. Overall quality of evidence was determined using van Tulder's levels of evidence approach. 12 studies were appraised. Overall, there was a 'moderate' level of evidence in favour of 'acceptable' (intraclass correlation coefficient ≥0.6) inter-rater and intra-rater reliability for composite scores derived from live scoring. For inter-rater reliability of composite scores derived from video recordings there was 'conflicting' evidence, and 'limited' evidence for intra-rater reliability. For inter-rater reliability based on live scoring of individual subtests there was 'moderate' evidence of 'acceptable' reliability (κ≥0.4) for 4 subtests (Deep Squat, Shoulder Mobility, Active Straight-leg Raise, Trunk Stability Push-up) and 'conflicting' evidence for the remaining 3 (Hurdle Step, In-line Lunge, Rotary Stability). This review found 'moderate' evidence that raters can achieve acceptable levels of inter-rater and intra-rater reliability of composite FMS scores when using live ratings. Overall, there were few high-quality studies, and the quality of several studies was impacted by poor study reporting particularly in relation to

Ultra-Reliable Communication in 5G Wireless Systems

DEFF Research Database (Denmark)

Popovski, Petar

2014-01-01

—Wireless 5G systems will not only be “4G, but faster”. One of the novel features discussed in relation to 5G is Ultra-Reliable Communication (URC), an operation mode not present in today’s wireless systems. URC refers to provision of certain level of communication service almost 100 % of the time....... Example URC applications include reliable cloud connectivity, critical connections for industrial automation and reliable wireless coordination among vehicles. This paper puts forward a systematic view on URC in 5G wireless systems. It starts by analyzing the fundamental mechanisms that constitute......-term URC (URC-S). The second dimension is represented by the type of reliability impairment that can affect the communication reliability in a given scenario. The main objective of this paper is to create the context for defining and solving the new engineering problems posed by URC in 5G....

AN ANALYTICAL FRAMEWORK FOR ASSESSING RELIABLE NUCLEAR FUEL SERVICE APPROACHES: ECONOMIC AND NON-PROLIFERATION MERITS OF NUCLEAR FUEL LEASING

International Nuclear Information System (INIS)

Kreyling, Sean J.; Brothers, Alan J.; Short, Steven M.; Phillips, Jon R.; Weimar, Mark R.

2010-01-01

The goal of international nuclear policy since the dawn of nuclear power has been the peaceful expansion of nuclear energy while controlling the spread of enrichment and reprocessing technology. Numerous initiatives undertaken in the intervening decades to develop international agreements on providing nuclear fuel supply assurances, or reliable nuclear fuel services (RNFS) attempted to control the spread of sensitive nuclear materials and technology. In order to inform the international debate and the development of government policy, PNNL has been developing an analytical framework to holistically evaluate the economics and non-proliferation merits of alternative approaches to managing the nuclear fuel cycle (i.e., cradle-to-grave). This paper provides an overview of the analytical framework and discusses preliminary results of an economic assessment of one RNFS approach: full-service nuclear fuel leasing. The specific focus of this paper is the metrics under development to systematically evaluate the non-proliferation merits of fuel-cycle management alternatives. Also discussed is the utility of an integrated assessment of the economics and non-proliferation merits of nuclear fuel leasing.

Upgrading elastomer seals for nuclear service

Energy Technology Data Exchange (ETDEWEB)

Wittich, K C; Wensel, R; LaRose, R; Kuran, S

1995-06-01

Pumps, valves and instruments in nuclear plants have historically contained whatever elastomer each equipment supplier traditionally used for corresponding non-nuclear service. The proliferation of elastomer compounds, and their sometimes uncertain reliability, is now being reduced by upgrading and standardizing on a handful of compounds that have each been verified to be high performers for their class of service conditions. The objective is to make cost-effective improvements in the reliability and integrity of equipment in Canadian-designed nuclear plants. The effort focuses on elastomer seals and includes: understanding sealing fundamentals, developing relevant data for superior compounds for each service, and improving quality assurance methods, including handling and inspection guidelines. In practice, discussions with plant personnel and review of plant records are the first step. Two severe-service examples are given where these needs have been met by the following progression of activities: inspecting and laboratory testing of seals removed from service, preliminary and qualification testing of improvements, introduction into service, and monitoring the upgraded seals during phase-in periods. Large gains in reliability and integrity have been demonstrated for simulated normal and accident service conditions of heat, radiation and other deteriorative influences. Significant savings in maintenance costs are also projected. (author). 2 refs., 6 figs.

Upgrading elastomer seals for nuclear service

International Nuclear Information System (INIS)

Wittich, K.C.; Wensel, R.; LaRose, R.; Kuran, S.

1995-06-01

Pumps, valves and instruments in nuclear plants have historically contained whatever elastomer each equipment supplier traditionally used for corresponding non-nuclear service. The proliferation of elastomer compounds, and their sometimes uncertain reliability, is now being reduced by upgrading and standardizing on a handful of compounds that have each been verified to be high performers for their class of service conditions. The objective is to make cost-effective improvements in the reliability and integrity of equipment in Canadian-designed nuclear plants. The effort focuses on elastomer seals and includes: understanding sealing fundamentals, developing relevant data for superior compounds for each service, and improving quality assurance methods, including handling and inspection guidelines. In practice, discussions with plant personnel and review of plant records are the first step. Two severe-service examples are given where these needs have been met by the following progression of activities: inspecting and laboratory testing of seals removed from service, preliminary and qualification testing of improvements, introduction into service, and monitoring the upgraded seals during phase-in periods. Large gains in reliability and integrity have been demonstrated for simulated normal and accident service conditions of heat, radiation and other deteriorative influences. Significant savings in maintenance costs are also projected. (author). 2 refs., 6 figs

Upgrading elastomer seals for nuclear service

International Nuclear Information System (INIS)

Wittich, K.C.; Wensel, R.; Larose, R.; Kuran, S.

1998-01-01

Pumps, valves and instruments in nuclear plants have historically contained whatever elastomer each equipment supplier traditionally used for corresponding non-nuclear service. The proliferation of elastomer compounds, and their sometimes uncertain reliability, is now being reduced by upgrading and standardizing on a handful of compounds that have each been verified to be high performers for their class of service conditions. The objective is to make cost-effective improvements in the reliability and integrity of equipment in Canadian-designed nuclear plants. The effort focuses on elastomer seals and includes: understanding sealing fundamentals, developing relevant data for superior compounds for each service, and improving quality assurance methods, including handling and inspection guidelines. In practice, discussion with plant personnel and review of plant records are the first step. Two severe-service examples are given where these needs have been met by the following progression of activities: inspecting and laboratory testing of seals removed from service, preliminary and qualification testing of improvements, introduction into service, and monitoring the upgraded seals during phase-in periods. Large gains in reliability and integrity have been demonstrated for simulated normal and accident service conditions of heat, radiation and other deteriorative influences. Significant savings in maintenance costs are also projected. (author)

Preliminary Analysis of LORAN-C System Reliability for Civil Aviation.

Science.gov (United States)

1981-09-01

overviev of the analysis technique. Section 3 describes the computerized LORAN-C coverage model which is used extensively in the reliability analysis...Xth Plenary Assembly, Geneva, 1963, published by International Telecomunications Union. S. Braff, R., Computer program to calculate a Karkov Chain Reliability Model, unpublished york, MITRE Corporation. A-1 I.° , 44J Ili *Y 0E 00 ...F i8 1110 Prelim inary Analysis of Program Engineering & LORAN’C System ReliabilityMaintenance Service i ~Washington. D.C.

Improved reliability, maintainability and safety through elastomer upgrading

International Nuclear Information System (INIS)

Wensel, R.; Wittich, K.C.

1995-01-01

Equipment in nuclear plants has historically contained whatever elastomer each component supplier traditionally used for corresponding non-nuclear service. The resulting proliferation of elastomer compounds, many of which are far from optimal for the service conditions (e.g., pressure, temperature, radiation, etc.), has multiplied the costs to provide station reliability, maintainability and safety. Cost-effective improvements are being achieved in CANDU plants by upgrading and standardizing on a handful of high performing elastomer compounds. These upgraded materials offer significant gains in service life over the materials they replace (often by factors of 2 or more). This rationalization of elastomer compounds also facilitates the EQ process for safety-related equipment. Detailed test data on aging is currently being generated for these specific elastomers, encompassing the conditions and media (air, water, oil) common in CANDU service. Two key elements characterize this testing. First, each result is specific to the compound used in the test, and second, it is specific to the tested failure mode (e.g., compression set, extrusion, fracture, etc.). Having fewer, but more thoroughly tested compounds, avoids the penalty (associated with poorly characterized materials) of having to replace parts prematurely because of conservatism, while maintaining safe, reliable service. This paper provides an overview of this approach covering: the benefits of compound rationalization; and the how and why of establishing relevant failure criteria; appropriate quality assurance to maintain EQ; procurement, storage and handling guidelines; and monitoring and predicting in-service degradation. (author)

National Ignition Facility (NIF) Control Network Design and Analysis

International Nuclear Information System (INIS)

Bryant, R M; Carey, R W; Claybourn, R V; Pavel, G; Schaefer, W J

2001-01-01

The control network for the National Ignition Facility (NIF) is designed to meet the needs for common object request broker architecture (CORBA) inter-process communication, multicast video transport, device triggering, and general TCP/IP communication within the NIF facility. The network will interconnect approximately 650 systems, including the embedded controllers, front-end processors (FEPs), supervisory systems, and centralized servers involved in operation of the NIF. All systems are networked with Ethernet to serve the majority of communication needs, and asynchronous transfer mode (ATM) is used to transport multicast video and synchronization triggers. CORBA software infra-structure provides location-independent communication services over TCP/IP between the application processes in the 15 supervisory and 300 FEP systems. Video images sampled from 500 video cameras at a 10-Hz frame rate will be multicast using direct ATM Application Programming Interface (API) communication from video FEPs to any selected operator console. The Ethernet and ATM control networks are used to broadcast two types of device triggers for last-second functions in a large number of FEPs, thus eliminating the need for a separate infrastructure for these functions. Analysis, design, modeling, and testing of the NIF network has been performed to provide confidence that the network design will meet NIF control requirements

Transmission embedded cost allocation methodology with consideration of system reliability

International Nuclear Information System (INIS)

Hur, D.; Park, J.-K.; Yoo, C.-I.; Kim, B.H.

2004-01-01

In a vertically integrated utility industry, the cost of reliability, as a separate service, has not received much rigorous analysis. However, as a cornerstone of restructuring the industry, the transmission service pricing must change to be consistent with, and supportive of, competitive wholesale electricity markets. This paper focuses on the equitable allocation of transmission network embedded costs including the transmission reliability cost based on the contributions of each generator to branch flows under normal conditions as well as the line outage impact factor under a variety of load levels. A numerical example on a six-bus system is given to illustrate the applications of the proposed methodology. (author)

Reduction of channel zapping delay in IPTV services

Directory of Open Access Journals (Sweden)

F. Moumtadi

2008-07-01

Full Text Available This paper analyses the existing delay within an IPTV system when a user selects an other channel, and a new algorithm is used to reduce it. Based on the adjacent groups method, which reduces the time acquisition of a new channel placing the order not only for that channel but also for the adjacent channels. There are two principles under coonsideration, one that there exists a sufficient bandwidht, and the other, a multicast transmission (Chunglae, 2004. At the end of the paper, the obtained results are compared against the present ones and the possibilities of the algorithm are determined.

Understanding health-related quality of life in caregivers of civilians and service members/veterans with traumatic brain injury: Establishing the reliability and validity of PROMIS Fatigue and Sleep Disturbance item banks.

Science.gov (United States)

Carlozzi, Noelle E; Ianni, Phillip A; Tulsky, David S; Brickell, Tracey A; Lange, Rael T; French, Louis M; Cella, David; Kallen, Michael A; Miner, Jennifer A; Kratz, Anna L

2018-06-19

To examine the reliability and validity of Patient Reported Outcomes Measurement Information System (PROMIS) measures of sleep disturbance and fatigue in TBI caregivers and to determine the severity of fatigue and sleep disturbance in these caregivers. Cross-sectional survey data collected through an online data capture platform. Four rehabilitation hospitals and Walter Reed National Military Medical Center. Caregivers (N=560) of civilians (n=344) and service member/veterans (n=216) with TBI. Not Applicable MAIN OUTCOME MEASURES: PROMIS sleep and fatigue measures administered as both computerized adaptive tests (CATs) and 4-item short forms (SFs). For both samples, floor and ceiling effects for the PROMIS measures were low (internal consistency was very good (all alphas ≥0.80), and test-retest reliability was acceptable (all r≥0.70 except for the fatigue CAT in the service member/veteran sample r=0.63). Convergent validity was supported by moderate correlations between the PROMIS and related measures. Discriminant validity was supported by low correlations between PROMIS measures and measures of dissimilar constructs. PROMIS scores indicated significantly worse sleep and fatigue for those caring for someone with high levels versus low levels of impairment. Findings support the reliability and validity of the PROMIS CAT and SF measures of sleep disturbance and fatigue in caregivers of civilians and service members/veterans with TBI. Copyright © 2018. Published by Elsevier Inc.

Service Oriented Architecture for High Level Applications

International Nuclear Information System (INIS)

Chu, P.

2012-01-01

Standalone high level applications often suffer from poor performance and reliability due to lengthy initialization, heavy computation and rapid graphical update. Service-oriented architecture (SOA) is trying to separate the initialization and computation from applications and to distribute such work to various service providers. Heavy computation such as beam tracking will be done periodically on a dedicated server and data will be available to client applications at all time. Industrial standard service architecture can help to improve the performance, reliability and maintainability of the service. Robustness will also be improved by reducing the complexity of individual client applications.

Versatile routing and services with BGP understanding and implementing BGP in SR-OS

CERN Document Server

Alcatel-Lucent

2014-01-01

Design a robust BGP control plane within a secure, scalable network for smoother services A robust Border Gateway Protocol setup is vital to ensuring reliable connectivity, an essential capability for any organization. The Internet has become a necessary, always-on service in homes and businesses, and BGP is the protocol that keeps communication flowing. But BGP also has become crucial to delivery of intra-domain business services. But the network is only as reliable as BGP, so service enablement depends upon making BGP more stable, reliable, and service-rich. Alcatel-Lucent Service Router Ope

A physical review on power system reliability factors

International Nuclear Information System (INIS)

Navid, Taghizadegan; Ahmad Reza, Zentabchi; Mohammad Ali, Tavakoli; Nader, Samsunchi; Mohammad Ali, Tavakoli

2005-01-01

Full text : Planning and design engineers and management must necessarily take into consideration the funds available, the requirements of regulatory agencies and other restrictions that may be imposed, as well as availability of equipment and supplies. A well-designed electrical power system strikes a reasonable between reliability and cost. A prime responsibility of power system operators is to operate their systems in such a way that will provide the maximum reliability of service possible with the facilities under their control

The impact of reliability on the productivity of railroad companies

DEFF Research Database (Denmark)

Abate, Megersa Abera; Lijesen, Mark; Pels, Eric

2013-01-01

This paper studies the relationship between reliability (proxied by punctuality) and productivity in passenger railroad services. Increasing reliability may lower productivity, as it requires inputs, that can’t be used to produce outputs. The relationship between reliability and productivity also...... runs through other factors, in which case a positive relationship may be expected. We apply data envelopment analysis and the Malmquist index approach to a panel of seven European railway systems to explore this relationship. Our empirical results suggest that increasing reliability does not harm...... the productivity of railway operations and aiming to improve both may be a feasible strategy. © 2013 Elsevier Ltd. All rights reserved....

Fiber Access Networks: Reliability Analysis and Swedish Broadband Market

Science.gov (United States)

Wosinska, Lena; Chen, Jiajia; Larsen, Claus Popp

Fiber access network architectures such as active optical networks (AONs) and passive optical networks (PONs) have been developed to support the growing bandwidth demand. Whereas particularly Swedish operators prefer AON, this may not be the case for operators in other countries. The choice depends on a combination of technical requirements, practical constraints, business models, and cost. Due to the increasing importance of reliable access to the network services, connection availability is becoming one of the most crucial issues for access networks, which should be reflected in the network owner's architecture decision. In many cases protection against failures is realized by adding backup resources. However, there is a trade off between the cost of protection and the level of service reliability since improving reliability performance by duplication of network resources (and capital expenditures CAPEX) may be too expensive. In this paper we present the evolution of fiber access networks and compare reliability performance in relation to investment and management cost for some representative cases. We consider both standard and novel architectures for deployment in both sparsely and densely populated areas. While some recent works focused on PON protection schemes with reduced CAPEX the current and future effort should be put on minimizing the operational expenditures (OPEX) during the access network lifetime.

Nondestructive examination (NDE) Reliability for Inservice Inspection of Light Water Reactors

International Nuclear Information System (INIS)

Doctor, S.R.; Good, M.S.; Heasler, P.G.; Hockey, R.L.; Simonen, F.A.; Spanner, J.C.; Taylor, T.T.; Vo, T.V.

1992-07-01

The Evaluation and Improvement of NDE reliability for Inservice Inspection of Light Water Reactors (NDE Reliability) Program at the Pacific Northwest Laboratory was established by the Nuclear Regulatory Commission to determine the reliability of current inservice inspection (ISI) techniques and to develop recommendations that will ensure a suitably high inspection reliability. The objectives of this program include determining the reliability of ISI performed on the primary systems of commercial light-water reactors (LWRs); using probabilistic fracture mechanics analysis to determine the impact of NDE unreliability on system safety; and evaluating reliability improvements that can be achieved with improved and advanced technology. A final objective is to formulate recommended revisions to the Regulatory and ASME Code requirements, based on material properties, service conditions, and NDE uncertainties

Regulating a Monopoly Offering Priority Service

OpenAIRE

Matsukawa, Isamu

2006-01-01

This paper investigates the effects of alternative forms of regulation on the market penetration and capacity, which are determined by a profit-maximizing monopolist providing priority service to consumers. For continuous priority service, a minimum reliability standard, price cap and rate of return regulation lead to larger capacity than in the absence of regulation. A minimum reliability standard reduces the market penetration while price cap and rate of return regulation increase it. T...

Reliable Radio Access for Massive Machine-to-Machine (M2M) Communication

DEFF Research Database (Denmark)

Madueño, Germán Corrales

the service requirements can range from massive number of devices to ultra-reliable. This PhD thesis focuses on novel mechanisms to meet these requirements in a variety of wireless systems, from well-established technologies such as cellular networks, to emerging technologies like IEEE 802.11ah. Today...... an overwhelming 89% of the deployed M2M modules are GPRS-based. This motivates us to investigate the potential of GPRS as a dedicated M2M network. We show that by introducing minimal modifications to GPRS operation, a large number of devices can be reliably supported. Surprisingly, even though LTE is seen...... as the preferable solution for M2M, no mechanisms are in place to guarantee reliable M2M access. Contrary to mainstream solutions that focus on preventing overload, we introduce mechanisms to provide reliable M2M service. We also investigate what cellular networks can do about upcoming smart metering traffic...

Reliability assessment of aging structures subjected to gradual and shock deteriorations

International Nuclear Information System (INIS)

Wang, Cao; Zhang, Hao; Li, Quanwang

2017-01-01

Civil structures and infrastructure facilities are susceptible to deterioration posed by the effects of natural hazards and aggressive environmental conditions. These factors may increase the risk of service interruption of infrastructures, and should be taken into account when assessing the structural reliability during an infrastructure's service life. Modeling the resistance deterioration process reasonably is the basis for structural reliability analysis. In this paper, a novel model is developed for describing the deterioration of aging structures. The deterioration is a combination of two stochastic processes: the gradual deterioration posed by environmental effects and the shock deterioration caused by severe load attacks. The dependency of the deterioration magnitude on the load intensity is considered. The Gaussian copula function is employed to help construct the joint distribution of correlated random variables. Semi-analytical methods are developed to assess the structural failure time and the number of significant load events (shocks) to failure. Illustrative examples are presented to demonstrate the applicability of the proposed model in structural reliability analysis. Parametric studies are performed to investigate the role of deterioration-load correlation in structural reliability. - Highlights: • A new resistance deterioration model for aging structures is proposed. • Time-dependent reliability analysis methods incorporating the proposed deterioration model are developed. • Parametric studies are performed to investigate the role of deterioration-load correlation in structural reliability.

Study of redundant Models in reliability prediction of HXMT's HES

International Nuclear Information System (INIS)

Wang Jinming; Liu Congzhan; Zhang Zhi; Ji Jianfeng

2010-01-01

Two redundant equipment structures of HXMT's HES are proposed firstly, the block backup and dual system cold-redundancy. Then prediction of the reliability is made by using parts count method. Research of comparison and analysis is also performed on the two proposals. A conclusion is drawn that a higher reliability and longer service life could be offered by taking a redundant equipment structure of block backup. (authors)

Development and Psychometric Testing of a Novel Food Service Satisfaction Questionnaire for Food Service Staff of Aged Care Homes.

Science.gov (United States)

Miller, M; Hamilton, J; Scupham, R; Matwiejczyk, L; Prichard, I; Farrer, O; Yaxley, A

2018-01-01

Food service staff are integral to delivery of quality food in aged care homes yet measurement of their satisfaction is unable to be performed due to an absence of a valid and reliable questionnaire. The aim of this study was to develop and perform psychometric testing for a new Food Service Satisfaction Questionnaire developed in Australia specifically for use by food service staff working in residential aged care homes (Flinders FSSQFSAC). A mixed methods design utilizing both a qualitative (in-depth interviews, focus groups) and a quantitative approach (cross sectional survey) was used. Content validity was determined from focus groups and interviews with food service staff currently working in aged care homes, related questionnaires from the literature and consultation with an expert panel. The questionnaire was tested for construct validity and internal consistency using data from food service staff currently working in aged care homes that responded to an electronic invitation circulated to Australian aged care homes using a national database of email addresses. Construct validity was tested via principle components analysis and internal consistency through Cronbach's alpha. Temporal stability of the questionnaire was determined from food service staff undertaking the Flinders FSSQFSAC on two occasions, two weeks apart, and analysed using Pearson's correlations. Content validity for the Flinders FSSQFSAC was established from a panel of experts and stakeholders. Principle components analysis revealed food service staff satisfaction was represented by 61-items divided into eight domains: job satisfaction (α=0.832), food quality (α=0.871), staff training (α=0.922), consultation (α=0.840), eating environment (α=0.777), reliability (α=0.695), family expectations (α=0.781) and resident relationships (α=0.429), establishing construct validity in all domains, and internal consistency in all (α>0.5) except for "resident relationships" (α=0.429). Test

Development of the Centralized Reliability Data Organization (CREDO)

International Nuclear Information System (INIS)

Haas, P.M.; Bott, T.F.; Knee, H.E.; Manning, J.J.; Hudson, S.D.; Greene, N.M.; Woodside, M.A.

1979-01-01

CREDO has been established to meet the needs of the US Breeder Reactor Program and the advanced reactor community for a centralized source of accurate reliability/maintainability data and data-related services. The center provides for a comprehensive program of collection, evaluation, and dissemination of data and for necessary user services. A steering committee of nationally recognized experts has been formed to guide CREDO development and operation. Historic data have been collected, analyzed, and published. Routine, continuous data collection and processing has been initiated at US sites. Interfaces with existing data bases have been established. Special user services are under development

Multiobjective Reliable Cloud Storage with Its Particle Swarm Optimization Algorithm

Directory of Open Access Journals (Sweden)

Xiyang Liu

2016-01-01

Full Text Available Information abounds in all fields of the real life, which is often recorded as digital data in computer systems and treated as a kind of increasingly important resource. Its increasing volume growth causes great difficulties in both storage and analysis. The massive data storage in cloud environments has significant impacts on the quality of service (QoS of the systems, which is becoming an increasingly challenging problem. In this paper, we propose a multiobjective optimization model for the reliable data storage in clouds through considering both cost and reliability of the storage service simultaneously. In the proposed model, the total cost is analyzed to be composed of storage space occupation cost, data migration cost, and communication cost. According to the analysis of the storage process, the transmission reliability, equipment stability, and software reliability are taken into account in the storage reliability evaluation. To solve the proposed multiobjective model, a Constrained Multiobjective Particle Swarm Optimization (CMPSO algorithm is designed. At last, experiments are designed to validate the proposed model and its solution PSO algorithm. In the experiments, the proposed model is tested in cooperation with 3 storage strategies. Experimental results show that the proposed model is positive and effective. The experimental results also demonstrate that the proposed model can perform much better in alliance with proper file splitting methods.

The computer vision in the service of safety and reliability in steam generators inspection services

International Nuclear Information System (INIS)

Pineiro Fernandez, P.; Garcia Bueno, A.; Cabrera Jordan, E.

2012-01-01

The actual computational vision has matured very quickly in the last ten years by facilitating new developments in various areas of nuclear application allowing to automate and simplify processes and tasks, instead or in collaboration with the people and equipment efficiently. The current computer vision (more appropriate than the artificial vision concept) provides great possibilities of also improving in terms of the reliability and safety of NPPS inspection systems.

reliability analysis of a two span floor designed according

African Journals Online (AJOL)

user

deterministic approach, considering both ultimate and serviceability limit states. Reliability analysis of the floor ... loading, strength and stiffness parameters, dimensions .... to show that there is a direct relation between the failure probability (Pf) ...

Wind power plant system services

DEFF Research Database (Denmark)

Basit, Abdul; Altin, Müfit

Traditionally, conventional power plants have the task to support the power system, by supplying power balancing services. These services are required by the power system operators in order to secure a safe and reliable operation of the power system. However, as in the future the wind power...... is going more and more to replace conventional power plants, the sources of conventional reserve available to the system will be reduced and fewer conventional plants will be available on-line to share the regulation burden. The reliable operation of highly wind power integrated power system might...... then beat risk unless the wind power plants (WPPs) are able to support and participate in power balancing services. The objective of this PhD project is to develop and analyse control strategies which can increase the WPPs capability to provide system services, such as active power balancing control...

Are consumer surveys valuable as a service improvement tool in health services? A critical appraisal.

Science.gov (United States)

Patwardhan, Anjali; Patwardhan, Prakash

2009-01-01

In the recent climate of consumerism and consumer focused care, health and social care needs to be more responsive than ever before. Consumer needs and preferences can be elicited with accepted validity and reliability only by strict methodological control, customerisation of the questionnaire and skilled interpretation. To construct, conduct, interpret and implement improved service provision, requires a trained work force and infrastructure. This article aims to appraise various aspects of consumer surveys and to assess their value as effective service improvement tools. The customer is the sole reason organisations exist. Consumer surveys are used worldwide as service and quality of care improvement tools by all types of service providers including health service providers. The article critically appraises the value of consumer surveys as service improvement tools in health services tool and its future applications. No one type of survey is the best or ideal. The key is the selection of the correct survey methodology, unique and customised for the particular type/aspect of care being evaluated. The method used should reflect the importance of the information required. Methodological rigor is essential for the effectiveness of consumer surveys as service improvement tools. Unfortunately so far there is no universal consensus on superiority of one particular methodology over another or any benefit of one specific methodology in a given situation. More training and some dedicated resource allocation is required to develop consumer surveys. More research is needed to develop specific survey methodology and evaluation techniques for improved validity and reliability of the surveys as service improvement tools. Measurement of consumer preferences/priorities, evaluation of services and key performance scores, is not easy. Consumer surveys seem impressive tools as they provide the customer a voice for change or modification. However, from a scientific point

Assessment of the Reliability Profiles for Concrete Bridges

DEFF Research Database (Denmark)

Thoft-Christensen, Palle

In this paper calculation of reliability profiles is discussed. ULS as well as SLS limit states are formulated. Corrosion due to chloride penetration is the considered deterioration mechanism. Three models for corrosion are formulated. A definition of service lifetime for concrete bridges...

Reliability In A White Rabbit Network

CERN Document Server

Lipiński, M; Wlostowski, T; Prados, C

2011-01-01

White Rabbit (WR) is a time-deterministic, low-latency Ethernet-based network which enables transparent, subns accuracy timing distribution. It is being developed to replace the General Machine Timing (GMT) system currently used at CERN and will become the foundation for the control system of the Facility for Antiproton and Ion Research (FAIR) at GSI. High reliability is an important issue inWR’s design, since unavailability of the accelerator’s control system will directly translate into expensive downtime of the machine. A typical WR network is required to lose not more than a single message per year. Due toWR’s complexity, the translation of this real-world-requirement into a reliability-requirement constitutes an interesting issue on its own – a WR network is considered functional only if it provides all its services to all its clients at any time. This paper defines reliability in WR and describes how it was addressed by dividing it into sub-domains: deterministic packet delivery, data resilience...

Linear SVM-Based Android Malware Detection for Reliable IoT Services

Directory of Open Access Journals (Sweden)

Hyo-Sik Ham

2014-01-01

Full Text Available Current many Internet of Things (IoT services are monitored and controlled through smartphone applications. By combining IoT with smartphones, many convenient IoT services have been provided to users. However, there are adverse underlying effects in such services including invasion of privacy and information leakage. In most cases, mobile devices have become cluttered with important personal user information as various services and contents are provided through them. Accordingly, attackers are expanding the scope of their attacks beyond the existing PC and Internet environment into mobile devices. In this paper, we apply a linear support vector machine (SVM to detect Android malware and compare the malware detection performance of SVM with that of other machine learning classifiers. Through experimental validation, we show that the SVM outperforms other machine learning classifiers.

Robo advisor, your reliable partner? Building a trustworthy digital investment management service

OpenAIRE

Salo, Anni

2017-01-01

Investment management services have strongly relied on traditional face-to-face business models, causing the services being highly expensive and therefore available only for the wealthiest population. Recently a new digital business model, robo advisors, entered the market and are predicted to democratise the entire industry by bringing investment management services available to a wider public than ever before. Although the business models in financial services are changing, customer tr...

Decentralized Fault Management for Service Dependability in Ubiquitous Networks

DEFF Research Database (Denmark)

Grønbæk, Lars Jesper

2010-01-01

) unobservable and incomplete network state information, ii) unreliable observations, and iii) dynamic environments calling for adaptation in the fault management process. In the study, focus is on potential gains in the interaction between the components of Observation, Diagnosis, Decision and Remediation...... insights on the impact of unavoidable diagnosis imperfections on service reliability. Also, it is studied to what extent good remediation decisions may be applied to mitigate such imperfections. For this purpose a light-weight decision policy evaluation model is proposed and verified in a system level...... simulation model. Some of the main findings are: i) certain imperfection trade-off settings of the Diagnosis component lead to worse end-user service reliability than if no fault management is conducted, ii) using end-user service state information in the decision process can help improve service reliability...

Reliability engineering

International Nuclear Information System (INIS)

Lee, Chi Woo; Kim, Sun Jin; Lee, Seung Woo; Jeong, Sang Yeong

1993-08-01

This book start what is reliability? such as origin of reliability problems, definition of reliability and reliability and use of reliability. It also deals with probability and calculation of reliability, reliability function and failure rate, probability distribution of reliability, assumption of MTBF, process of probability distribution, down time, maintainability and availability, break down maintenance and preventive maintenance design of reliability, design of reliability for prediction and statistics, reliability test, reliability data and design and management of reliability.

Techniques for increasing the reliability of accelerator control system electronics

International Nuclear Information System (INIS)

Utterback, J.

1993-09-01

As the physical size of modern accelerators becomes larger and larger, the number of required control system circuit boards increases, and the probability of one of those circuit boards failing while in service also increases. In order to do physics, the experimenters need the accelerator to provide beam reliably with as little down time as possible. With the advent of colliding beams physics, reliability becomes even more important due to the fact that a control system failure can cause the loss of painstakingly produced antiprotons. These facts prove the importance of keeping reliability in mind when designing and maintaining accelerator control system electronics

Reliability estimation for multiunit nuclear and fossil-fired industrial energy systems

International Nuclear Information System (INIS)

Sullivan, W.G.; Wilson, J.V.; Klepper, O.H.

1977-01-01

As petroleum-based fuels grow increasingly scarce and costly, nuclear energy may become an important alternative source of industrial energy. Initial applications would most likely include a mix of fossil-fired and nuclear sources of process energy. A means for determining the overall reliability of these mixed systems is a fundamental aspect of demonstrating their feasibility to potential industrial users. Reliability data from nuclear and fossil-fired plants are presented, and several methods of applying these data for calculating the reliability of reasonably complex industrial energy supply systems are given. Reliability estimates made under a number of simplifying assumptions indicate that multiple nuclear units or a combination of nuclear and fossil-fired plants could provide adequate reliability to meet industrial requirements for continuity of service

Using the network as bus system for long discharge data acquisition and data processing

Energy Technology Data Exchange (ETDEWEB)

Hennig, Ch. [Max-Planck-Institut Fuer Plasmaphysik, EURATOM Association, Teilinstitut Greifswald, Wendelsteinstrasse 1, 17491 Greifswald (Germany)]. E-mail: Christine.Hennig@ipp.mpg.de; Bluhm, T. [Max-Planck-Institut Fuer Plasmaphysik, EURATOM Association, Teilinstitut Greifswald, Wendelsteinstrasse 1, 17491 Greifswald (Germany); Heimann, P. [Max-Planck-Institut Fuer Plasmaphysik, EURATOM Association, Boltzmannstrasse 2, 85748 Garching (Germany); Kroiss, H. [Max-Planck-Institut Fuer Plasmaphysik, EURATOM Association, Boltzmannstrasse 2, 85748 Garching (Germany); Kuehner, G. [Max-Planck-Institut Fuer Plasmaphysik, EURATOM Association, Teilinstitut Greifswald, Wendelsteinstrasse 1, 17491 Greifswald (Germany); Kuehntopf, H. [Max-Planck-Institut Fuer Plasmaphysik, EURATOM Association, Teilinstitut Greifswald, Wendelsteinstrasse 1, 17491 Greifswald (Germany); Maier, J. [Max-Planck-Institut Fuer Plasmaphysik, EURATOM Association, Boltzmannstrasse 2, 85748 Garching (Germany); Zilker, M. [Max-Planck-Institut Fuer Plasmaphysik, EURATOM Association, Boltzmannstrasse 2, 85748 Garching (Germany)

2006-07-15

Data acquisition in shot-based fusion experiments is characterized by a large amount of data collected within a short time. The stellarator experiment Wendelstein 7-X (W7-X) will produce a considerable higher amount of data in a continuous and steady-state operation within half an hour. Therefore, it is not sufficient to wait until all data has been acquired and stored in the database before being able to view and analyze data. Continuous and robust data transport is needed for (1) a distributed data monitoring system to visualize trends (2) continuous data acquisition of data available at the network and (3) message signaling. The paper introduces a network channel concept covering a system-wide available data description, half sync/half async communication pattern, data serialization, identification and matching of data. It is focusing on the IP Multicast/UDP implementation for the data monitoring system and presents results of performance measurements. Suitability and limitations are discussed and an appropriate answer to the question 'When is IP Multicast/UDP reliable?' is given.

The relative importance of service dimensions in a healthcare setting.

Science.gov (United States)

Ramsaran-Fowdar, Rooma Roshnee

2008-01-01

The paper aims to focus on an augmented SERVQUAL instrument that was used to measure private patients' service expectations and perceptions. A questionnaire was administered to 750 and 34 per cent responded. A new service quality instrument called PRIVHEALTHQUAL emerged from the study, based on factor and reliability analysis. The "reliability and fair and equitable treatment" factor was found to be the most important healthcare service quality dimension. Adds to the existing body of research on service quality and demonstrates that SERVQUAL is not a generic service quality measure for all industries.

Service reliability assessment using failure mode and effect analysis ...

African Journals Online (AJOL)

user

Statistical Process Control Teng and Ho (1996) .... are still remaining left on modelling the interaction between impact of internal service failure and ..... Design error proofing: development of automated error-proofing information systems, Proceedings of.

Allied health clinicians using translational research in action to develop a reliable stroke audit tool.

Science.gov (United States)

Abery, Philip; Kuys, Suzanne; Lynch, Mary; Low Choy, Nancy

2018-05-23

To design and establish reliability of a local stroke audit tool by engaging allied health clinicians within a privately funded hospital. Design: Two-stage study involving a modified Delphi process to inform stroke audit tool development and inter-tester reliability. Allied health clinicians. A modified Delphi process to select stroke guideline recommendations for inclusion in the audit tool. Reliability study: 1 allied health representative from each discipline audited 10 clinical records with sequential admissions to acute and rehabilitation services. Recommendations were admitted to the audit tool when 70% agreement was reached, with 50% set as the reserve agreement. Inter-tester reliability was determined using intra-class correlation coefficients (ICCs) across 10 clinical records. Twenty-two participants (92% female, 50% physiotherapists, 17% occupational therapists) completed the modified Delphi process. Across 6 voting rounds, 8 recommendations reached 70% agreement and 2 reached 50% agreement. Two recommendations (nutrition/hydration; goal setting) were added to ensure representation for all disciplines. Substantial consistency across raters was established for the audit tool applied in acute stroke (ICC .71; range .48 to .90) and rehabilitation (ICC.78; range .60 to .93) services. Allied health clinicians within a privately funded hospital generally agreed in an audit process to develop a reliable stroke audit tool. Allied health clinicians agreed on stroke guideline recommendations to inform a stroke audit tool. The stroke audit tool demonstrated substantial consistency supporting future use for service development. This process, which engages local clinicians, could be adopted by other facilities to design reliable audit tools to identify local service gaps to inform changes to clinical practice. © 2018 John Wiley & Sons, Ltd.

Coexistence of enhanced mobile broadband communications and ultra-reliable low-latency communications in mobile front-haul

Science.gov (United States)

Ying, Kai; Kowalski, John M.; Nogami, Toshizo; Yin, Zhanping; Sheng, Jia

2018-01-01

5G systems are supposed to support coexistence of multiple services such as ultra reliable low latency communications (URLLC) and enhanced mobile broadband (eMBB) communications. The target of eMBB communications is to meet the high-throughput requirement while URLLC are used for some high priority services. Due to the sporadic nature and low latency requirement, URLLC transmission may pre-empt the resource of eMBB transmission. Our work is to analyze the URLLC impact on eMBB transmission in mobile front-haul. Then, some solutions are proposed to guarantee the reliability/latency requirements for URLLC services and minimize the impact to eMBB services at the same time.

Automated Energy Distribution and Reliability System Status Report

Energy Technology Data Exchange (ETDEWEB)

Buche, D. L.; Perry, S.

2007-10-01

This report describes Northern Indiana Public Service Co. project efforts to develop an automated energy distribution and reliability system. The purpose of this project was to implement a database-driven GIS solution that would manage all of the company's gas, electric, and landbase objects.

Improvement of AC motor reliability from technique standardization

International Nuclear Information System (INIS)

Muniz, P.R.; Faria, M.D.R.; Mendes, M.P.; Silva, J.N.; Dos Santos, J.D.

2005-01-01

The purpose of this paper is to explain the increase of reliability of motors serviced in the Electrical Maintenance Shop of Companhia Siderurgica de Tubarao by standardization of the technique based on Brazilian and International Standards, manufacturer's recommendations and the experience of the maintenance staff. (author)

A k-out-of-n reliability system with an unreliable server and phase type repairs and services: the (N,T policy

Directory of Open Access Journals (Sweden)

Srinivas R. Chakravarthy

2001-01-01

Full Text Available In this paper we study a k-out-of-n reliability system in which a single unreliable server maintains n identical components. The reliability system is studied under the (N,T policy. An idle server takes a vacation for a random amount of time T and then attends to any failed component waiting in line upon completion of the vacation. The vacationing server is recalled instantaneously upon the failure of the Nth component. The failure times of the components are assumed to follow an exponential distribution. The server is subject to failure with failure times exponentially distributed. Repair times of the component, fixing times of the server, and vacationing times of the server are assumed to be of phase type. Using matrix-analytic methods we perform steady state analysis of this model. Time spent by a failed component in service, total time in the repair facility, vacation time of the server, non-vacation time of the server, and time until failure of the system are all shown to be of phase type. Several performance measures are evaluated. Illustrative numerical examples are presented.

Tests of the Validity and Reliability of the Community Service Attitudes Scale

Science.gov (United States)

Perry, Brian; Osbaldiston, Richard; Henning, Jaime

2014-01-01

Community service is deeply rooted in American culture. There have been repeated calls for the necessity of evaluating these programs, especially for service-learning. The purpose of this research was to validate an easy-to-use scale that measures 10 components of students' attitudes toward community service. The sample was drawn from two…

Consortium for Electric Reliability Technology Solutions Grid of the Future White Paper on Review of Recent Reliability Issues and Systems Events

Energy Technology Data Exchange (ETDEWEB)

Hauer, John F.; Dagle, Jeffery E.

1999-12-01

This report is one of six reports developed under the U.S. Department of Energy (DOE) program in Power System Integration and Reliability (PSIR). The objective of this report is to review, analyze, and evaluate critical reliability issues demonstrated by recent disturbance events in the North America power system. Eleven major disturbances are examined, most occurring in this decade. The strategic challenge is that the pattern of technical need has persisted for a long period of time. For more than a decade, anticipation of market deregulation has been a major disincentive to new investments in system capacity. It has also inspired reduced maintenance of existing assets. A massive infusion of better technology is emerging as the final option to continue reliable electrical services. If an investment in better technology will not be made in a timely manner, then North America should plan its adjustments to a very different level of electrical service. It is apparent that technical operations staff among the utilities can be very effective at marshaling their forces in the immediate aftermath of a system emergency, and that serious disturbances often lead to improved mechanisms for coordinated operation. It is not at all apparent that such efforts can be sustained through voluntary reliability organizations in which utility personnel external to those organizations do most of the technical work. The eastern interconnection shows several situations in which much of the technical support has migrated from the utilities to the Independent System Operator (ISO), and the ISO staffs or shares staff with the regional reliability council. This process may be a natural and very positive consequence of utility restructuring. If so, the process should be expedited in regions where it is less advanced.

Understanding Health-related Quality of Life in Caregivers of Civilians and Service Members/Veterans with Traumatic Brain Injury: Establishing the Reliability and Validity of PROMIS Mental Health Measures.

Science.gov (United States)

Carlozzi, Noelle E; Hanks, Robin; Lange, Rael T; Brickell D Psych, Tracey A; Ianni, Phillip A; Miner, Jennifer A; French Psy D, Louis M; Kallen, Michael A; Sander, Angelle M

2018-06-19

To provide important reliability and validity data to support the use of the PROMIS Mental Health measures in caregivers of civilians or service members/veterans with traumatic brain injury (TBI). Patient-reported outcomes surveys administered through an electronic data collection platform. Three TBI Model Systems rehabilitation hospitals, an academic medical center, and a military medical treatment facility. 560 caregivers of individuals with a documented TBI (344 civilians and 216 military) INTERVENTION: Not Applicable MAIN OUTCOME MEASURES: PROMIS Anxiety, Depression, and Anger Item Banks RESULTS: Internal consistency for all of the PROMIS Mental Health item banks was very good (all α > .86) and three-week test retest reliability was good to adequate (ranged from .65 to .85). Convergent validity and discriminant validity of the PROMIS measures was also supported. Caregivers of individuals that were low functioning had worse emotional HRQOL (as measured by the three PROMIS measures) than caregivers of high functioning individuals, supporting known groups validity. Finally, levels of distress, as measured by the PROMIS measures, were elevated for those caring for low-functioning individuals in both samples (rates ranged from 26.2% to 43.6% for caregivers of low-functioning individuals). Results support the reliability and validity of the PROMIS Anxiety, Depression, and Anger item banks in caregivers of civilians and service members/veterans with TBI. Ultimately, these measures can be used to provide a standardized assessment of HRQOL as it relates to mental health in these caregivers. Copyright © 2018. Published by Elsevier Inc.

evaluation of willingness to pay for reliable and sustainable ...

African Journals Online (AJOL)

Osondu

evaluate the WTP for reliable and sustainable service delivery. The findings of the study .... In doing this, the revenue base and cost recovery will as well be enhanced in ..... delays at traffic warden controlled urban intersections: case study of ...

Fuel element services

International Nuclear Information System (INIS)

Marta, H.; Alvarez, P.; Jimenez, J.

2006-01-01

Refuelling outages comprise a number of maintenance tasks scheduled long in advance to assure a reliable operation throughout the next cycle and, in the long run, a safer and more efficient plant. Most of these tasks are routine service of mechanical and electrical system and likewise fuel an be considered a critical component as to handling, inspection, cleaning and repair. ENUSA-ENWESA AIE has been working in this area since 1995 growing from fuel repair to a more integrated service that includes new and spent fuel handling, inserts, failed fuel rod detection systems, ultrasonic fuel cleaning, fuel repair and a comprehensive array of inspection and tests related to the reliability of the mechanical components in the fuel assembly, all this, performed in compliance with quality, safety, health physics and any other nuclear standard. (Author)

Studying customer loyalty at Daewoo express bus service, Pakistan

Directory of Open Access Journals (Sweden)

Usman Yousaf

2013-09-01

Full Text Available Background: Meeting service quality standards and striving for loyalty are two critical areas which have until now been overlooked by both the passenger transport industry and academia in Pakistan therefore the study sheds useful light on an issue hitherto untouched. Therefore increased sample size will help in increasing generalizability of study. Methods: This paper is designed to study the level of loyalty at Daewoo Express Bus Service in Sargodha by measuring customer satisfaction. Researchers used a small sample of only 96 respondents (passengers and only studies customer's behavior in the service quality of Daewoo Express Bus Service however it may differ in other passenger transport services. Results and conclusions: This paper reveals that there is a positive and significant relationship between loyalty (dependant variable and price perceptions, reliability, retrieving and smoothing (independent variables. However, the study found that reliability of services is the most important dimension among other independent variables (price perceptions, smoothing, reliability, retrieving effecting customers loyalty at Daewoo Express. Paper under consideration would surely assist Daewoo`s management team to take care of the loopholes existing in the current service level and likely threats which Daewoo might face.

Command and Control Data Dissemination Using IP Multicast

National Research Council Canada - National Science Library

Barrera, Raymond

1999-01-01

Tools have been developed which allow tactical data to be exchanged over Internet Protocol networks, but the quality of service necessary to operate these tools is not available for most Naval vessels at this time...

Enhanced Reliability of Photovoltaic Systems with Energy Storage and Controls

Energy Technology Data Exchange (ETDEWEB)

Manz, D.; Schelenz, O.; Chandra, R.; Bose, S.; de Rooij, M.; Bebic, J.

2008-02-01

This report summarizes efforts to reconfigure loads during outages to allow individual customers the opportunity to enhance the reliability of their electric service through the management of their loads, photovoltaics, and energy storage devices.

Load As A Reliability Resource in the Restructured Electricity Market

Energy Technology Data Exchange (ETDEWEB)

Kueck, J.D.

2002-06-10

Recent electricity price spikes are painful reminders of the value that meaningful demand-side responses could bring to the restructuring US electricity system. Review of the aggregate offers made by suppliers confirms that even a modest increase in demand elasticity could dramatically reduce these extremes in price volatility. There is a strong need for dramatically increased customer participation in these markets to enhance system reliability and reduce price volatility. Indeed, allowing customers to manage their loads in response to system conditions might be thought of as the ultimate reliability resource. Most would agree that meaningful demand-side responses to price are the hallmark of a well-functioning competitive market [1]. Yet, in today's markets for electricity, little or no such response is evident. The reason is simple: customers currently do not experience directly the time-varying costs of their consumption decisions. Consequently, they have no incentive to modify these decisions in ways that might enhance system reliability or improve the efficiency of the markets in which electricity is traded. Increased customer participation is a necessary step in the evolution toward more efficient markets for electricity and ancillary services. This scoping report provides a three-part assessment of the current status of efforts to enhance the ability of customer's load to participate in competitive markets with a specific focus on the role of customer loads in enhancing electricity system reliability. First, this report considers the definitions of electricity-reliability-enhancing ancillary services (Section 2) and a preliminary assessment of the ability of customer's loads to provide these services. Second, is a review a variety of programs in which load has been called on as a system reliability resource (Section 3). These experiences, drawn from both past and current utility and ISO programs, focus on programs triggered by system

DIRAC: reliable data management for LHCb

International Nuclear Information System (INIS)

Smith, A C; Tsaregorodtsev, A

2008-01-01

DIRAC, LHCb's Grid Workload and Data Management System, utilizes WLCG resources and middleware components to perform distributed computing tasks satisfying LHCb's Computing Model. The Data Management System (DMS) handles data transfer and data access within LHCb. Its scope ranges from the output of the LHCb Online system to Grid-enabled storage for all data types. It supports metadata for these files in replica and bookkeeping catalogues, allowing dataset selection and localization. The DMS controls the movement of files in a redundant fashion whilst providing utilities for accessing all metadata. To do these tasks effectively the DMS requires complete self integrity between its components and external physical storage. The DMS provides highly redundant management of all LHCb data to leverage available storage resources and to manage transient errors in underlying services. It provides data driven and reliable distribution of files as well as reliable job output upload, utilizing VO Boxes at LHCb Tier1 sites to prevent data loss. This paper presents several examples of mechanisms implemented in the DMS to increase reliability, availability and integrity, highlighting successful design choices and limitations discovered

Linking Service Quality Attributes To Customer Satisfaction in The ...

African Journals Online (AJOL)

The purpose of the study was to determine the service quality dimensions of mobile phone services-network performance, service reliability and service accessibility, and to ex-amine the service quality/customer satisfaction link within the context of mobile phone services. An exploratory research design using a quantitative ...

Cloud services, networking, and management

CERN Document Server

da Fonseca, Nelson L S

2015-01-01

Cloud Services, Networking and Management provides a comprehensive overview of the cloud infrastructure and services, as well as their underlying management mechanisms, including data center virtualization and networking, cloud security and reliability, big data analytics, scientific and commercial applications. Special features of the book include: State-of-the-art content. Self-contained chapters for readers with specific interests. Includes commercial applications on Cloud (video services and games).

Systems reliability/structural reliability

International Nuclear Information System (INIS)

Green, A.E.

1980-01-01

The question of reliability technology using quantified techniques is considered for systems and structures. Systems reliability analysis has progressed to a viable and proven methodology whereas this has yet to be fully achieved for large scale structures. Structural loading variants over the half-time of the plant are considered to be more difficult to analyse than for systems, even though a relatively crude model may be a necessary starting point. Various reliability characteristics and environmental conditions are considered which enter this problem. The rare event situation is briefly mentioned together with aspects of proof testing and normal and upset loading conditions. (orig.)

Sigma: computer vision in the service of safety and reliability in the inspection services

International Nuclear Information System (INIS)

Pineiro, P. J.; Mendez, M.; Garcia, A.; Cabrera, E.; Regidor, J. J.

2012-01-01

Vision Computing is growing very fast in the last decade with very efficient tools and algorithms. This allows new development of applications in the nuclear field providing more efficient equipment and tasks: redundant systems, vision-guided mobile robots, automated visual defects recognition, measurement, etc., In this paper Tecnatom describes a detailed example of visual computing application developed to provide secure redundant identification of the thousands of tubes existing in a power plant steam generator. some other on-going or planned visual computing projects by Tecnatom are also introduced. New possibilities of application in the inspection systems for nuclear components appear where the main objective is to maximize their reliability. (Author) 6 refs.

Practice of value-based distribution reliability assessment (VBDRA) at Scarborough Public Utilities

International Nuclear Information System (INIS)

Chen, R-L.

1995-01-01

The development of value-based distribution reliability assessment (VBDRA) at Scarborough Public Utilities was described. Load point reliability indices, customer interruption costs (CIC), continuity and service reliability, accuracy of CIC, and the aspects of application of VBDRA were addressed. The application of VBDRA to a long-term rebuild plan for 4.16 kV distribution system was described. The importance of a cost-benefit analysis for implementation of VBDRA was emphasized. In the case of the Scarborough Public Utilities Commission the enhanced feeder reliability assessment was found to influence the allocation of funding to where it provided the most value to customers. 14 refs., 3 tabs., 3 figs

Estimation of electromagnetic pumps reliability based on the results of their exploitation

International Nuclear Information System (INIS)

Vitkovskij, I.V.; Kirillov, I.R.; Chajka, P.Yu.; Kryuchkov, E.A.; Poplavskij, V.M.; Nosov, Yu.V.; Oshkanov, N.N.

2007-01-01

Main factors, determining the service life of induction electromagnetic pumps (IEP), are analyzed. It is shown that the IEP serviceability depends mainly on the winding reliability. The main damaging factors, acting on the windings, are noted. The expressions for calculation of the failure intensity for the coil and case insulations are obtained [ru

Reliability Engineering

International Nuclear Information System (INIS)

Lee, Sang Yong

1992-07-01

This book is about reliability engineering, which describes definition and importance of reliability, development of reliability engineering, failure rate and failure probability density function about types of it, CFR and index distribution, IFR and normal distribution and Weibull distribution, maintainability and movability, reliability test and reliability assumption in index distribution type, normal distribution type and Weibull distribution type, reliability sampling test, reliability of system, design of reliability and functionality failure analysis by FTA.

Multimedia Services in Open Distributed Telecommunications Environments

NARCIS (Netherlands)

Leydekkers, Peter

1997-01-01

The design and analysis of transport protocols for reliable communications constitutes the topic of this dissertation. These transport protocols guarantee the sequenced and complete delivery of user data over networks which may lose, duplicate and reorder packets. Reliable transport services are

A fracture mechanics and reliability based method to assess non-destructive testings for pressure vessels

International Nuclear Information System (INIS)

Kitagawa, Hideo; Hisada, Toshiaki

1979-01-01

Quantitative evaluation has not been made on the effects of carrying out preservice and in-service nondestructive tests for securing the soundness, safety and maintainability of pressure vessels, spending large expenses and labor. Especially the problems concerning the time and interval of in-service inspections lack the reasonable, quantitative evaluation method. In this paper, the problems of pressure vessels are treated by having developed the analysis method based on reliability technology and probability theory. The growth of surface cracks in pressure vessels was estimated, using the results of previous studies. The effects of nondestructive inspection on the defects in pressure vessels were evaluated, and the influences of many factors, such as plate thickness, stress, the accuracy of inspection and so on, on the effects of inspection, and the method of evaluating the inspections at unequal intervals were investigated. The analysis of reliability taking in-service inspection into consideration, the evaluation of in-service inspection and other affecting factors through the typical examples of analysis, and the review concerning the time of inspection are described. The method of analyzing the reliability of pressure vessels, considering the growth of defects and preservice and in-service nondestructive tests, was able to be systematized so as to be practically usable. (Kako, I.)

Reliability study: steam generation and distribution system, Portsmouth Gaseous Diffusion Plant

International Nuclear Information System (INIS)

Baker, F.E.; Davis, E.L.; Dent, J.T.; Walters, D.E.; West, R.M.

1982-10-01

A reliability study for determining the ability of the Steam Generation and Distribution System to provide reliable and adequate service through the year 2000 has been completed. This study includes an evaluation of the X-600 Steam Plant and the steam distribution system. The Steam Generation and Distribution System is in good overall condition, but to maintain this condition, the reliability study team made twelve recommendations. Eight of the recommendations are for repair or replacement of existing equipment and have a total estimated cost of $540,000. The other four recommendations are for additional testing, new procedure implementation, or continued investigations

On the application of nonhomogeneous Poisson process to the reliability analysis of service water pumps of nuclear power plants

International Nuclear Information System (INIS)

Cruz Saldanha, Pedro Luiz da.

1995-12-01

The purpose of this study is to evaluate the nonhomogeneous Poisson process as a model to rate of occurrence of failures when it is not constant, and the times between failures are not independent nor identically distributed. To this evaluation, an analyse of reliability of service water pumps of a typical nuclear power plant is made considering the model discussed in the last paragraph, as long as the pumps are effectively repairable components. Standard statistical techniques, such as maximum likelihood and linear regression, are applied to estimate parameters of nonhomogeneous Poisson process model. As a conclusion of the study, the nonhomogeneous Poisson process is adequate to model rate of occurrence of failures that are function of time, and can be used where the aging mechanisms are present in operation of repairable systems. (author). 72 refs., 45 figs., 21 tabs

Reliability-based design code calibration for concrete containment structures

International Nuclear Information System (INIS)

Han, B.K.; Cho, H.N.; Chang, S.P.

1991-01-01

In this study, a load combination criteria for design and a probability-based reliability analysis were proposed on the basis of a FEM-based random vibration analysis. The limit state model defined for the study is a serviceability limit state of the crack failure that causes the emission of radioactive materials, and the results are compared with the case of strength limit state. More accurate reliability analyses under various dynamic loads such as earthquake loads were made possible by incorporating the FEM and random vibration theory, which is different from the conventional reliability analysis method. The uncertainties in loads and resistance available in Korea and the references were adapted to the situation of Korea, and especially in case of earthquake, the design earthquake was assessed based on the available data for the probabilistic description of earthquake ground acceleration in the Korea peninsula. The SAP V-2 is used for a three-dimensional finite element analysis of concrete containment structure, and the reliability analysis is carried out by modifying HRAS reliability analysis program for this study. (orig./GL)

Training and Maintaining System-Wide Reliability in Outcome Management.

Science.gov (United States)

Barwick, Melanie A; Urajnik, Diana J; Moore, Julia E

2014-01-01

The Child and Adolescent Functional Assessment Scale (CAFAS) is widely used for outcome management, for providing real time client and program level data, and the monitoring of evidence-based practices. Methods of reliability training and the assessment of rater drift are critical for service decision-making within organizations and systems of care. We assessed two approaches for CAFAS training: external technical assistance and internal technical assistance. To this end, we sampled 315 practitioners trained by external technical assistance approach from 2,344 Ontario practitioners who had achieved reliability on the CAFAS. To assess the internal technical assistance approach as a reliable alternative training method, 140 practitioners trained internally were selected from the same pool of certified raters. Reliabilities were high for both practitioners trained by external technical assistance and internal technical assistance approaches (.909-.995, .915-.997, respectively). 1 and 3-year estimates showed some drift on several scales. High and consistent reliabilities over time and training method has implications for CAFAS training of behavioral health care practitioners, and the maintenance of CAFAS as a global outcome management tool in systems of care.

Accessing data transfer reliability for duty cycled mobile wireless sensor network

International Nuclear Information System (INIS)

Shaikh, F.K.

2014-01-01

Mobility in WSNs (Wireless Sensor Networks) introduces significant challenges which do not arise in static WSNs. Reliable data transport is an important aspect of attaining consistency and QoS (Quality of Service) in several applications of MWSNs (Mobile Wireless Sensor Networks). It is important to understand how each of the wireless sensor networking characteristics such as duty cycling, collisions, contention and mobility affects the reliability of data transfer. If reliability is not managed well, the MWSN can suffer from overheads which reduce its applicability in the real world. In this paper, reliability assessment is being studied by deploying MWSN in different indoor and outdoor scenarios with various duty cycles of the motes and speeds of the mobile mote. Results show that the reliability is greatly affected by the duty cycled motes and the mobility using inherent broadcast mechanisms. (author)

IMPROVING THE LOGISTICAL PROCESSES IN CORPORATE SERVICE SYSTEM

Directory of Open Access Journals (Sweden)

Irina MAKAROVA

2016-03-01

Full Text Available The study deals with enhancing the reliability of freight cars by improving the corporate service system. Assessing of the quality of spare parts suppliers is discussed. An algorithm for supplier selection and an evaluation method, based on cluster analysis of indicators of supplier reliability, is proposed. Alternative developments for a service network, in view of expanding of the car fleet powered by natural gas-based fuel have been considered.

Reliability

OpenAIRE

Condon, David; Revelle, William

2017-01-01

Separating the signal in a test from the irrelevant noise is a challenge for all measurement. Low test reliability limits test validity, attenuates important relationships, and can lead to regression artifacts. Multiple approaches to the assessment and improvement of reliability are discussed. The advantages and disadvantages of several different approaches to reliability are considered. Practical advice on how to assess reliability using open source software is provided.

Nondestructive examination (NDE) reliability for inservice inspection of light water reactors

International Nuclear Information System (INIS)

Doctor, S.R.; Deffenbaugh, J.D.; Good, M.S.; Green, E.R.; Heasler, P.G.; Simonen, F.A.; Spanner, J.C.; Taylor, T.T.

1989-10-01

The Evaluation and Improvement of NDE Reliability for Inservice Inspection of Light Water Reactors (NDE Reliability) Program at the Pacific Northwest Laboratory was established by the Nuclear Regulatory Commission to determine the reliability of current inservice inspection (ISI) techniques and to develop recommendations that will ensure a suitably high inspection reliability. The objectives of this program include determining the reliability of ISI performed on the primary systems of commercial light-water reactors (LWRs); using probabilistic fracture mechanics analysis to determine the impact of NDE unreliability on system safety; and evaluating reliability improvement that can be achieved with improved and advanced technology. A final objective is to formulate recommended revisions to ASME Code and Regulatory requirements based on material properties, service conditions, and NDE capabilities and uncertainties. The program scope is limited to ISI of the primary systems including the piping, vessel, and other inspected components. This is a progress report covering the programmatic work from October 1987 through March 1988. 21 refs., 28 figs., 2 tabs

Nondestructive examination (NDE) reliability for inservice inspection of light waters reactors

International Nuclear Information System (INIS)

Doctor, S.R.; Deffenbaugh, J.D.; Good, M.S.; Green, E.R.; Heasler, P.G.; Simonen, F.A.; Spanner, J.C.; Taylor, T.T.

1989-11-01

Evaluation and Improvement of NDE Reliability for Inservice Inspection of Light Water Reactors (NDE Reliability) Program at the Pacific Northwest Laboratory was established by the Nuclear Regulatory Commission to determine the reliability of current inservice inspection (ISI) techniques and to develop recommendations that will ensure a suitably high inspection reliability. The objectives of this program include determining the reliability of ISI performed on the primary systems of commercial light-water reactors (LWRs); using probabilistic fracture mechanics analysis to determine the impact of NDE unreliability on system safety; and evaluating reliability improvements that can be achieved with improved and advanced technology. A final objective is to formulate recommended revisions to ASME Code and Regulatory requirements, based on material properties, service conditions, and NDE uncertainties. The program scope is limited to ISI of the primary systems including the piping, vessel, and other inspected components. This is a progress report covering the programmatic work from April 1988 through September 1988. 33 refs., 70 figs., 12 tabs

Nondestructive Examination (NDE) Reliability for Inservice Inspection of Light Water Reactors

International Nuclear Information System (INIS)

Doctor, S.R.; Diaz, A.A.; Friley, J.R.

1993-09-01

The Evaluation and Improvement of NDE Reliability for Inservice Inspection of Light Water Reactors (NDE Reliability) Program at the Pacific Northwest Laboratory was established by the Nuclear Regulatory Commission to determine the reliability of current inservice inspection (ISI) techniques and to develop recommendations that will ensure a suitably high inspection reliability. The objectives of this program include determining the reliability of ISI performed on the primary systems of commercial light-water reactors (LWRs); using probabilistic fracture mechanics analysis to determine the impact of NDE unreliability on system safety; and evaluating reliability improvements that can be achieved with improved and advanced technology. A final objective is to formulate recommended revisions to ASME Code and Regulatory requirements, based on material properties, service conditions, and NDE uncertainties. The program scope is limited to ISI of the primary systems including the piping, vessel, and other components inspected in accordance with Section XI of the ASME Code. This is a progress report covering the programmatic work from October 1991 through March 1992

RELIABLE DYNAMIC SOURCE ROUTING PROTOCOL (RDSRP FOR ENERGY HARVESTING WIRELESS SENSOR NETWORKS

Directory of Open Access Journals (Sweden)

B. Narasimhan

2015-03-01

Full Text Available Wireless sensor networks (WSNs carry noteworthy pros over traditional communication. Though, unkind and composite environments fake great challenges in the reliability of WSN communications. It is more vital to develop a reliable unipath dynamic source routing protocol (RDSRPl for WSN to provide better quality of service (QoS in energy harvesting wireless sensor networks (EH-WSN. This paper proposes a dynamic source routing approach for attaining the most reliable route in EH-WSNs. Performance evaluation is carried out using NS-2 and throughput and packet delivery ratio are chosen as the metrics.

Future of Christian health services – an economic perspective

Directory of Open Access Journals (Sweden)

Steffen Flessa

2016-01-01

Full Text Available Although Christian Health Services have a proud history of healing and compassion especially in developing countries, their future is affected by secular changes in the financing and provision of health care services. However, the nature of life as it is evolving in modern society promises a need for the capacity to deal with increasing dynamics, complexity and uncertainty. In these circumstances the potential capacity of Christians in their institutions and churches to provide Unconditional Reliability suggests a new opportunity. The components of Unconditional Reliability and how they affect the portfolio of Christian Health Services is explained. Effective Christian Health Services will require appropriate analysis of their portfolios.

Automated Energy Distribution and Reliability System (AEDR): Final Report

Energy Technology Data Exchange (ETDEWEB)

Buche, D. L.

2008-07-01

This report describes Northern Indiana Public Service Co. project efforts to develop an automated energy distribution and reliability system. The purpose of this project was to implement a database-driven GIS solution that would manage all of the company's gas, electric, and landbase objects.

Service task partition and distribution in star topology computer grid subject to data security constraints

Energy Technology Data Exchange (ETDEWEB)

Xiang Yanping [Collaborative Autonomic Computing Laboratory, School of Computer Science, University of Electronic Science and Technology of China (China); Levitin, Gregory, E-mail: levitin@iec.co.il [Collaborative Autonomic Computing Laboratory, School of Computer Science, University of Electronic Science and Technology of China (China); Israel electric corporation, P. O. Box 10, Haifa 31000 (Israel)

2011-11-15

The paper considers grid computing systems in which the resource management systems (RMS) can divide service tasks into execution blocks (EBs) and send these blocks to different resources. In order to provide a desired level of service reliability the RMS can assign the same blocks to several independent resources for parallel execution. The data security is a crucial issue in distributed computing that affects the execution policy. By the optimal service task partition into the EBs and their distribution among resources, one can achieve the greatest possible service reliability and/or expected performance subject to data security constraints. The paper suggests an algorithm for solving this optimization problem. The algorithm is based on the universal generating function technique and on the evolutionary optimization approach. Illustrative examples are presented. - Highlights: > Grid service with star topology is considered. > An algorithm for evaluating service reliability and data security is presented. > A tradeoff between the service reliability and data security is analyzed. > A procedure for optimal service task partition and distribution is suggested.

Service task partition and distribution in star topology computer grid subject to data security constraints

International Nuclear Information System (INIS)

Xiang Yanping; Levitin, Gregory

2011-01-01

The paper considers grid computing systems in which the resource management systems (RMS) can divide service tasks into execution blocks (EBs) and send these blocks to different resources. In order to provide a desired level of service reliability the RMS can assign the same blocks to several independent resources for parallel execution. The data security is a crucial issue in distributed computing that affects the execution policy. By the optimal service task partition into the EBs and their distribution among resources, one can achieve the greatest possible service reliability and/or expected performance subject to data security constraints. The paper suggests an algorithm for solving this optimization problem. The algorithm is based on the universal generating function technique and on the evolutionary optimization approach. Illustrative examples are presented. - Highlights: → Grid service with star topology is considered. → An algorithm for evaluating service reliability and data security is presented. → A tradeoff between the service reliability and data security is analyzed. → A procedure for optimal service task partition and distribution is suggested.

A RELIABILITY TEST USED FOR THE DEVELOPMENT OF A LOYALTY SCALE

Directory of Open Access Journals (Sweden)

Florin-Alexandru LUCA

2017-06-01

Full Text Available The development of a loyalty model involves the construction of a proper research instrument. For the loyalty model of the clients for financial services, the pre-testing of the research questionnaire represents a significant stage. This article presents the methodology used in this stage for testing the reliability of a loyalty scale. Firstly, this implies choosing the appropriate scales for each variable included in the suggested research model. Secondly, the internal consistency for each of these scales is measured as an indicator of their reliability. The reliability analysis described represents an essential stage in building a measurement instrument for a loyalty model.

Relationships Between Service Personal Values, Service Value, Satisfaction, and Loyalty: A Study Regarding Services of Private and State Hospitals in Turkey

Directory of Open Access Journals (Sweden)

Metin Argan

2017-06-01

Full Text Available Service and value are the two inseparable concepts in experiential service environment. Service personal value is a concept that is subjectively assessed from a consumer perspective, and is associated with service value, consumer satisfaction and loyalty. In this context, the purpose of this study was to examine the relationships between services personal values, service value, satisfaction, and loyalty. Data were collected from persons (996 receiving services from private hospitals and state hospitals using convenience sampling method. The scales of service personal values, service value, satisfaction and loyalty were adapted from literature. Confirmatory factor analysis (CFA was used to investigate validity and reliability of the scales. Then, a structural equation model (SEM was developed and tested using data with Lisrel 8.80 software. The results of the study indicate significant relationships between services personal values, service value, satisfaction, and loyalty. The results of the study have significant implications as to how well private hospital managers design strategies of health service, satisfaction, and loyalty.

FRAMATOME nuclear services

International Nuclear Information System (INIS)

Delorme, H.; Buttin, J.

1985-05-01

FRAMATOME is a French company whose main activities since 1958 have been the design and manufacture of standardized PWR Nuclear Steam Supply Systems. FRAMATOME builds the Reactor Coolant System components and installs and starts-up the extended Nuclear Steam Supply Systems. In addition to the supply of spare parts of tooling, the services offered by Framatome are implementation of backfits aimed at performance and safety improvement and equipment reliability, technical assistance and, maintenance and repair services

Equilibrium moisture content of wood at different temperature/moisture conditions in the cladding of wooden constructions and in the relation to their reliability and service life

OpenAIRE

Zdeňka Havířová; Pavel Kubů

2010-01-01

One of the natural properties of wood and wood-based materials is their soaking capacity (hy­gro­sco­pi­ci­ty). The moisture content of wood and building constructions of wood and wood based materials significantly influences the service life and reliability of these constructions and buildings. The equilibrium weight moisture content of built-in wood corresponding to temperature/moisture conditions inside the cladding has therefore a decisive influence on the basic requirements placed on bui...

Reliability Analysis of Operation for Cableways by FTA (Fault Tree Analysis Method

Directory of Open Access Journals (Sweden)

Sergej Težak

2010-05-01

Full Text Available This paper examines the reliability of the operation of cableway systems in Slovenia, which has major impact on the quality of service in the mountain tourism, mainly in wintertime. Different types of cableway installations in Slovenia were captured in a sample and fault tree analysis (FTA was made on the basis of the obtained data. The paper presents the results of the analysis. With these results it is possible to determine the probability of faults of different types of cableways, which types of faults have the greatest impact on the termination of operation, which components of cableways fail most, what is the impact of age of cableways on the occurrence of the faults. Finally, an attempt was made to find if occurrence of faults on individual cableway installation has also impact on traffic on this cableway due to reduced quality of service. KEYWORDS: cableways, aerial ropeways, chairlifts, ski-tows, quality, faults, fault tree analysis, reliability, service quality, winter tourism, mountain tourist centre

Logical Lego? Co-constructed perspectives on service design

NARCIS (Netherlands)

Heath, Claude P.; Coles-Kemp, Lizzie; Hall, Peter A.

2014-01-01

In the era of ‘digital by default’, internet-borne services reach out into spaces and places. One example of such a service is home-based micro-payments using Internet Protocol Television (IPTV) that depends on reliable information-sharing practices between user and service providers. Traditional

Low Computational Complexity Network Coding For Mobile Networks

DEFF Research Database (Denmark)

Heide, Janus

2012-01-01

Network Coding (NC) is a technique that can provide benefits in many types of networks, some examples from wireless networks are: In relay networks, either the physical or the data link layer, to reduce the number of transmissions. In reliable multicast, to reduce the amount of signaling and enable......-flow coding technique. One of the key challenges of this technique is its inherent computational complexity which can lead to high computational load and energy consumption in particular on the mobile platforms that are the target platform in this work. To increase the coding throughput several...

GAUSS Market Analysis for Integrated Satellite Communication and Navigation Location Based services

Science.gov (United States)

Di Fazio, Antonella; Dricot, Fabienne; Tata, Francesco

2003-07-01

The demand for mobile information services coupled with positioning technologies for delivering value- added services that depend on a user's location has rapidly increased during last years. In particular, services and applications related with improved mobility safety and transport efficiency look very attractive.Solutions for location services vary in respect of positioning accuracy and the technical infrastructure required, and the associated investment in terminals and networks. From the analysis of the state-of-the art, it comes that various technologies are currently available on the European market, while mobile industry is gearing up to launch a wide variety of location services like tracking, alarming and locating.Nevertheless, when addressing safety of life as well as security applications, severe hurdles have to be posed in the light of existing technologies. Existing navigation (e.g. GPS) and communication systems are not able to completely satisfy the needs and requirements of safety-of-life-critical applications. As a matter of fact, the GPS system's main weaknesses today is its lack of integrity, which means its inability to warn users of a malfunction in a reasonable time, while the other positioning techniques do not provide satisfactory accuracy as well, and terrestrial communication networks are not capable to cope with stringent requirement in terms of service reliability and coverage.In this context, GAUSS proposes an innovative satellite-based solution using novel technology and effective tools for addressing mobility challenges in a cost efficient manner, improving safety and effectiveness.GAUSS (Galileo And UMTS Synergetic System) is a Research and Technological Development project co- funded by European Commission, within the frame of the 5th IST Programme. The project lasted two years, and it was successfully completed in November 2002. GAUSS key concept is the integration of Satellite Navigation GNSS and UMTS communication technology, to

Determinants of customer satisfaction with professional services: A study of consultants services

DEFF Research Database (Denmark)

Sonne, Anne-Mette

1999-01-01

Although models of service quality and customer satisfaction have been well researched within the consumer goods and services area, much less attention has been paid to high involvement business-to-business service satisfaction. The objective of this study is to contribute to this stream...... of research through a survey of customers of the Norwegian Institute of Fisheries and Aquaculture. Information on which factors are the determinants of customer satisfaction is important to consultants since customer satisfaction is what the service business depends on for repeat business. In this study we...... found that customer satisfaction is mostly influenced by the perceived competence of the consultant and the technical reliability demonstrated in the project. However, the perceived service quality is also influenced by the way the customer is treated during the service production process....

Performance Evaluation of Cloud Service Considering Fault Recovery

Science.gov (United States)

Yang, Bo; Tan, Feng; Dai, Yuan-Shun; Guo, Suchang

In cloud computing, cloud service performance is an important issue. To improve cloud service reliability, fault recovery may be used. However, the use of fault recovery could have impact on the performance of cloud service. In this paper, we conduct a preliminary study on this issue. Cloud service performance is quantified by service response time, whose probability density function as well as the mean is derived.

The National Centre of Systems Reliability and some aspects of its future activities

International Nuclear Information System (INIS)

Bourne, A.J.

1975-01-01

The National Centre of Systems Reliability (NCSR) has been set up to enhance the work of the Systems Reliability Service (SRS), which during its four years of operation by the UKAEA has offered to industry expertise in the quantification of reliability of systems in various technological applications. An outline is presented of the background to the establishment of the NCSR, including a brief summary of the work of the SRS. Certain aspects of the future activities of the NCSR particularly in relation to research and collaboration with universities are discussed. (U.K.)

Nondestructive Examination (NDE) Reliability for Inservice Inspection of Light Water Reactors

International Nuclear Information System (INIS)

Doctor, S.R.; Diaz, A.A.; Friley, J.R.; Good, M.S.; Greenwood, M.S.; Heasler, P.G.; Hockey, R.L.; Kurtz, R.J.; Simonen, F.A.; Spanner, J.C.; Taylor, T.T.; Vo, T.V.

1992-07-01

The Evaluation and Improvement of NDE Reliability for Inservice Inspection of Light Water Reactors (NDE Reliability) Program at the Pacific Northwest Laboratory was established by the Nuclear Regulatory Commission to determine the reliability of current inservice inspection (ISI) techniques and to develop recommendations that will ensure a suitably high inspection reliability. The objectives of this program include determining the reliability of ISI performed on the primary systems of commercial light-water reactors (LWR's); using probabilistic fracture mechanics analysis to determine the impact of NDE unreliability on system safety; and evaluating reliability improvements that can be achieved with improved and advanced technology. A final objective is to formulate recommended revisions to the Regulatory and ASME Code requirements, based on material properties, service conditions, and NDE uncertainties. The program scope is limited to ISI of the primary systems including the piping, vessel, and other components inspected in accordance with Section XI of the ASME Code. This is a progress report covering the programmatic work from April 1991 through September 1991

Nondestructive Examination (NDE) Reliability for Inservice Inspection of Light Water Reactors

International Nuclear Information System (INIS)

Doctor, S.R.; Diaz, A.A.; Friley, J.R.; Greenwood, M.S.; Heasler, P.G.; Kurtz, R.J.; Simonen, F.A.; Spanner, J.C.; Vo, T.V.

1993-11-01

The Evaluation and Improvement of NDE Reliability for Inservice inspection of Light Water Reactors (NDE Reliability) Program at the Pacific Northwest Laboratory was established by the Nuclear Regulatory Commission to determine the reliability of current inservice inspection (ISI) techniques and to develop recommendations that will ensure a suitably high inspection reliability. The objectives of this program include determining the reliability of ISI performed on the primary systems of commercial light-water reactors (LWRs);using probabilistic fracture mechanics analysis to determine the impact of NDE unreliability on system safety; and evaluating reliability improvements that can be achieved with improved and advanced technology. A final objective is to formulate recommended revisions to the Regulatory and ASME Code requirements, based on material properties, service conditions, and NDE uncertainties. The program scope is limited to ISI of the primary systems including the piping, vessel and other components inspected in accordance with Section XI of the ASME Code. This is a programs report covering the programmatic work from April 1992 through September 1992

Nondestructive examination (NDE) reliability for inservice inspection of light water reactors

International Nuclear Information System (INIS)

Doctor, S.R.; Good, M.S.; Green, E.R.; Heasler, P.G.; Simonen, F.A.; Spanner, J.C.; Taylor, T.T.; Vo, T.V.

1991-08-01

The Evaluation and Improvement of NDE Reliability for Inservice Inspection of Light Water Reactors (NDE Reliability) Program at the Pacific Northwest Laboratory was established by the Nuclear Regulatory Commission to determine the reliability of current inservice inspection (ISI) techniques and to develop recommendations that will ensure a suitably high inspection reliability. The objectives of this program include determining the reliability of ISI performed on the primary systems of commercial light-water reactors (LWRs); using probabilistic fracture mechanics analysis to determine the impact of NDE unreliability on system safety; and evaluating reliability improvements that can be achieved with improved and advanced technology. A final objective is to formulate recommended revisions to ASME Code and Regulatory requirements, based on material properties, service conditions, and NDE uncertainties. The program scope is limited to ISI of the primary systems including the piping, vessel, and other components inspected in accordance with Section 6 of the ASME Code. This is a progress report covering the pro grammatic work from April 1989 through September 1989. 12 refs., 4 figs. 5 tabs

Evaluating the service quality of third-party logistics service providers using the analytic hierarchy process

Directory of Open Access Journals (Sweden)

Soon-hoo So

2006-12-01

Full Text Available In this study we apply the analytic hierarchy process (AHP to evaluate the service quality of third-party logistics (3PL service providers. We first conceptualize five dimensions of 3PL service quality (i.e. tangibles, reliability, responsiveness, assurance and empathy. We then apply the AHP method to determine the relative weights of the five service quality dimensions and eventually select the best 3PL service provider. To implement this idea in practice, we conduct an empirical case study on four companies providing 3PL services in Korea. The results indicate that Responsiveness out of the five service quality dimensions is the most important factor in the perception of 3PL customers.

Problems in diagnosing and forecasting power equipment reliability

Energy Technology Data Exchange (ETDEWEB)

Popkov, V I; Demirchyan, K S

1979-11-01

This general survey deals with approaches to the resolution of such problems as the gathering, analysis and systematization of data on component defects in power equipment and setting up feedback with the manufacturing plants and planning organizations to improve equipment reliability. Such efforts on the part of designers, manufacturers and operating and repair organizations in analyzing faults in 300 MW turbogenerators during 1974-1977 reduced the specific fault rate by 20 to 25% and the downtime per failure by 35 to 40%. Since power equipment should operate for several hundreds of thousands of hours (20 to 30 years) and the majority of power components have guaranteed service lives of no more than 10/sup 5/ hours, an extremely difficult problem is the determination of the reliability of equipment past the 10/sup 5/ point. The present trend in the USSR Unified Power System towards increasing the number of shutdowns and startups, which in the case of turbogenerators of up 1200 MW power can reach 7500 to 10,000 cycles is noted. Other areas briefly treated are: MHD generator reliability and economy; nuclear power plant reliability and safety; the reliability of high-power high-voltage thyristor converters; the difficulties involved in scale modeling of power system reliability and the high cost of the requisite full-scale studies; the poor understanding of long term corrosion and erosion processes. The review concludes with arguments in favor of greater computerization of all aspects of power system management.

Mammography image assessment; validity and reliability of current scheme

International Nuclear Information System (INIS)

Hill, C.; Robinson, L.

2015-01-01

Mammographers currently score their own images according to criteria set out by Regional Quality Assurance. The criteria used are based on the ‘Perfect, Good, Moderate, Inadequate’ (PGMI) marking criteria established by the National Health Service Breast Screening Programme (NHSBSP) in their Quality Assurance Guidelines of 2006 1 . This document discusses the validity and reliability of the current mammography image assessment scheme. Commencing with a critical review of the literature this document sets out to highlight problems with the national approach to the use of marking schemes. The findings suggest that ‘PGMI’ scheme is flawed in terms of reliability and validity and is not universally applied across the UK. There also appear to be differences in schemes used by trainees and qualified mammographers. Initial recommendations are to be made in collaboration with colleagues within the National Health Service Breast Screening Programme (NHSBSP), Higher Education Centres, College of Radiographers and the Royal College of Radiologists in order to identify a mammography image appraisal scheme that is fit for purpose. - Highlights: • Currently no robust evidence based marking tools in use for the assessment of images in mammography. • Is current system valid, reliable and robust? • How can the current image assessment tool be improved? • Should students and qualified mammographers use the same tool? • What marking criteria are available for image assessment?

The impact of reliability centered maintenance on plant prospects for license renewal

International Nuclear Information System (INIS)

Elliott, J.O.; Nakahara, Y.

1991-01-01

Much attention has been directed in recent years to means of extending nuclear power plant life. As many plants enter their third decade of service, the questions loom large of how to keep aging plants reliable, as well as how to assure reliability and safety to an extent sufficient to warrant license renewal at the end of the current licensing term. Concurrently the nuclear industry has seen a growing interest in reducing the cost and complexity of maintenance activities while at the same time improving plant reliability and availability. Attainment of these seemingly contradictory aims is being aided by the introduction of a maintenance philosophy developed originally by the airline industry and subsequently applied with great success both in that industry and the U.S. military services. Reliability Centered Maintenance (RCM), in its basic form, may be described as a consideration of reliability and maintenance problems from a systems level approach, allowing a focus on preservation of system functions as the aim of a maintenance program optimized for both safety and economics. It is this systematic view of plant maintenance, with the emphasis on preservation of overall functions rather than individual parts and components which sets RCM apart from past nuclear plant maintenance philosophies. It is also the factor which makes application of RCM an ideal first step in development of strategies for life extension and license renewal, both for aging plants, and for plants just beginning their first license term

Distributed Ship Navigation Control System Based on Dual Network

Science.gov (United States)

Yao, Ying; Lv, Wu

2017-10-01

Navigation system is very important for ship’s normal running. There are a lot of devices and sensors in the navigation system to guarantee ship’s regular work. In the past, these devices and sensors were usually connected via CAN bus for high performance and reliability. However, as the development of related devices and sensors, the navigation system also needs the ability of high information throughput and remote data sharing. To meet these new requirements, we propose the communication method based on dual network which contains CAN bus and industrial Ethernet. Also, we import multiple distributed control terminals with cooperative strategy based on the idea of synchronizing the status by multicasting UDP message contained operation timestamp to make the system more efficient and reliable.

Applying franchising principles to improving water and sanitation services reliability

CSIR Research Space (South Africa)

Wall, K

2008-11-01

Full Text Available CSIR research has found that franchising partnerships could alleviate and address many challenges in the operation and maintenance of water services infrastructure. Franchising brings appropriate training to those on-site, and also offers backup off...

Measuring service quality and its relationship to future consumer behavior.

Science.gov (United States)

Headley, D E; Miller, S J

1993-01-01

The authors adapt the SERVQUAL scale for medical care services and examine it for reliability, dimensionality, and validity in a primary care clinic setting. In addition, they explore the possibility of a link between perceived service quality--and its various dimensions--and a patient's future intent to complain, compliment, repeat purchase, and switch providers. Findings from 159 matched-pair responses indicate that the SERVQUAL scale can be adapted reliably to a clinic setting and that the dimensions of reliability, dependability, and empathy are most predictive of a patient's intent to complain, compliment, repeat purchase, and switch providers.

Business Cases for Microgrids: Modeling Interactions of Technology Choice, Reliability, Cost, and Benefit

Science.gov (United States)

Hanna, Ryan

Distributed energy resources (DERs), and increasingly microgrids, are becoming an integral part of modern distribution systems. Interest in microgrids--which are insular and autonomous power networks embedded within the bulk grid--stems largely from the vast array of flexibilities and benefits they can offer stakeholders. Managed well, they can improve grid reliability and resiliency, increase end-use energy efficiency by coupling electric and thermal loads, reduce transmission losses by generating power locally, and may reduce system-wide emissions, among many others. Whether these public benefits are realized, however, depends on whether private firms see a "business case", or private value, in investing. To this end, firms need models that evaluate costs, benefits, risks, and assumptions that underlie decisions to invest. The objectives of this dissertation are to assess the business case for microgrids that provide what industry analysts forecast as two primary drivers of market growth--that of providing energy services (similar to an electric utility) as well as reliability service to customers within. Prototypical first adopters are modeled--using an existing model to analyze energy services and a new model that couples that analysis with one of reliability--to explore interactions between technology choice, reliability, costs, and benefits. The new model has a bi-level hierarchy; it uses heuristic optimization to select and size DERs and analytical optimization to schedule them. It further embeds Monte Carlo simulation to evaluate reliability as well as regression models for customer damage functions to monetize reliability. It provides least-cost microgrid configurations for utility customers who seek to reduce interruption and operating costs. Lastly, the model is used to explore the impact of such adoption on system-wide greenhouse gas emissions in California. Results indicate that there are, at present, co-benefits for emissions reductions when customers

Ecosystem services for energy security

Energy Technology Data Exchange (ETDEWEB)

Athanas, Andrea; McCormick, Nadine

2010-09-15

The world is at an energy crossroads. The changes underway will have implications for ecosystems and livelihoods. Energy security is the reliable supply of affordable energy, of which there are two dimensions; reliability and resilience. Changes in ecosystem services linked to degradation and climate change have the potential to impact both on the reliabiity of energy systems and on their resiliance. Investing in ecosystems can help safeguard energy systems, and mitigate unforeseen risks to energy security. The energy and conservation community should come together to build reliable and resilliant energy systems in ways which recognise and value supporting ecosystems.

Non-utility generation and demand management reliability of customer delivery systems

International Nuclear Information System (INIS)

Hamoud, G.A.; Wang, L.

1995-01-01

A probabilistic methodology for evaluating the impact of non-utility generation (NUG) and demand management programs (DMP) on supply reliability of customer delivery systems was presented. The proposed method was based on the criteria that the supply reliability to the customers on the delivery system should not be affected by the integration of either NUG or DMPs. The method considered station load profile, load forecast, and uncertainty in size and availability of the nuio. Impacts on system reliability were expressed in terms of possible delays of the in-service date for new facilities or in terms of an increase in the system load carrying capability. Examples to illustrate the proposed methodology were provided. 10 refs., 8 tabs., 2 figs

Electrical system design and reliability at Ontario Hydro nuclear generating stations

Energy Technology Data Exchange (ETDEWEB)

Royce, C. J. [Ontario Hydro, 700 University Avenue, Toronto, Ontario M5G 1X6 (Canada)

1986-02-15

This paper provides an overview of design practice and the predicted and actual reliability of electrical station service Systems at Ontario Nuclear Generating Stations. Operational experience and licensing changes have indicated the desirability of improving reliability in certain instances. For example, the requirement to start large emergency coolant injection pumps resulted in the turbine generator units in a multi-unit station being used as a back-up power supply. Results of reliability analyses are discussed. To mitigate the effects of common mode events Ontario Hydro adopted a 'two group' approach to the design of safety related Systems. This 'two group' approach is reviewed and a single fully environmentally qualified standby power supply is proposed for future use. (author)

Reliability of optical fibres and components final report of COST 246

CERN Document Server

Griffioen, Willem; Gadonna, Michel; Limberger, Hans; Heens, Bernard; Knuuttila, Hanna; Kurkjian, Charles; Mirza, Shehzad; Opacic, Aleksandar; Regio, Paola; Semjonov, Sergei

1999-01-01

Reliability of Optical Fibres and Components reports the findings of COST 246 (1993-1998) - European research initiative in the field of optical telecommunications. Experts in the materials and reliability field of optical fibres and components have contributed to this unique study programme. The results, conclusions and achievements of their work have been obtained through joint experimentation and discussion with representatives from manufacturing and research groups. Topics covered include: Lifetime estimation; Failure mechanisms; Ageing test methods; Field data and service environments for components. For the first time the reader can explore the reliability of products and examine the results and conclusions in published form. This comprehensive volume is intended to provide a deeper understanding of the reliability of optical fibres and components. The book will be extremely useful to all scientists and practitioners involved in the industry.

High-reliability computing for the smarter planet

International Nuclear Information System (INIS)

Quinn, Heather M.; Graham, Paul; Manuzzato, Andrea; Dehon, Andre

2010-01-01

The geometric rate of improvement of transistor size and integrated circuit performance, known as Moore's Law, has been an engine of growth for our economy, enabling new products and services, creating new value and wealth, increasing safety, and removing menial tasks from our daily lives. Affordable, highly integrated components have enabled both life-saving technologies and rich entertainment applications. Anti-lock brakes, insulin monitors, and GPS-enabled emergency response systems save lives. Cell phones, internet appliances, virtual worlds, realistic video games, and mp3 players enrich our lives and connect us together. Over the past 40 years of silicon scaling, the increasing capabilities of inexpensive computation have transformed our society through automation and ubiquitous communications. In this paper, we will present the concept of the smarter planet, how reliability failures affect current systems, and methods that can be used to increase the reliable adoption of new automation in the future. We will illustrate these issues using a number of different electronic devices in a couple of different scenarios. Recently IBM has been presenting the idea of a 'smarter planet.' In smarter planet documents, IBM discusses increased computer automation of roadways, banking, healthcare, and infrastructure, as automation could create more efficient systems. A necessary component of the smarter planet concept is to ensure that these new systems have very high reliability. Even extremely rare reliability problems can easily escalate to problematic scenarios when implemented at very large scales. For life-critical systems, such as automobiles, infrastructure, medical implantables, and avionic systems, unmitigated failures could be dangerous. As more automation moves into these types of critical systems, reliability failures will need to be managed. As computer automation continues to increase in our society, the need for greater radiation reliability is necessary

High-reliability computing for the smarter planet

Energy Technology Data Exchange (ETDEWEB)

Quinn, Heather M [Los Alamos National Laboratory; Graham, Paul [Los Alamos National Laboratory; Manuzzato, Andrea [UNIV OF PADOVA; Dehon, Andre [UNIV OF PENN; Carter, Nicholas [INTEL CORPORATION

2010-01-01

The geometric rate of improvement of transistor size and integrated circuit performance, known as Moore's Law, has been an engine of growth for our economy, enabling new products and services, creating new value and wealth, increasing safety, and removing menial tasks from our daily lives. Affordable, highly integrated components have enabled both life-saving technologies and rich entertainment applications. Anti-lock brakes, insulin monitors, and GPS-enabled emergency response systems save lives. Cell phones, internet appliances, virtual worlds, realistic video games, and mp3 players enrich our lives and connect us together. Over the past 40 years of silicon scaling, the increasing capabilities of inexpensive computation have transformed our society through automation and ubiquitous communications. In this paper, we will present the concept of the smarter planet, how reliability failures affect current systems, and methods that can be used to increase the reliable adoption of new automation in the future. We will illustrate these issues using a number of different electronic devices in a couple of different scenarios. Recently IBM has been presenting the idea of a 'smarter planet.' In smarter planet documents, IBM discusses increased computer automation of roadways, banking, healthcare, and infrastructure, as automation could create more efficient systems. A necessary component of the smarter planet concept is to ensure that these new systems have very high reliability. Even extremely rare reliability problems can easily escalate to problematic scenarios when implemented at very large scales. For life-critical systems, such as automobiles, infrastructure, medical implantables, and avionic systems, unmitigated failures could be dangerous. As more automation moves into these types of critical systems, reliability failures will need to be managed. As computer automation continues to increase in our society, the need for greater radiation reliability is

Bring Your Own Device - Providing Reliable Model of Data Access

Directory of Open Access Journals (Sweden)

Stąpór Paweł

2016-10-01

Full Text Available The article presents a model of Bring Your Own Device (BYOD as a model network, which provides the user reliable access to network resources. BYOD is a model dynamically developing, which can be applied in many areas. Research network has been launched in order to carry out the test, in which as a service of BYOD model Work Folders service was used. This service allows the user to synchronize files between the device and the server. An access to the network is completed through the wireless communication by the 802.11n standard. Obtained results are shown and analyzed in this article.

Reliability-Oriented Design and Analysis of Input Capacitors in Single-Phase Transformer-less Photovoltaic Inverters

DEFF Research Database (Denmark)

Wang, Huai; Yang, Yongheng; Blaabjerg, Frede

2013-01-01

While 99% efficiency has been reported, the target of 20 years of service time imposes new challenge to cost-effective solutions for grid-connected photovoltaic (PV) inverters. Aluminum electrolytic capacitors are the weak-link in terms of reliability and lifetime in single-phase PV systems....... A reliability-oriented design guideline is proposed in this paper for the input capacitors in single-phase transformer-less PV inverters. The guideline ensures that the service time requirement is to be accomplished under different power levels and ambient temperature profiles. The theoretical analysis has been...... demonstrated by a 1 kW single-phase PV inverter....

Evaluation of Network Reliability for Computer Networks with Multiple Sources

Directory of Open Access Journals (Sweden)

Yi-Kuei Lin

2012-01-01

Full Text Available Evaluating the reliability of a network with multiple sources to multiple sinks is a critical issue from the perspective of quality management. Due to the unrealistic definition of paths of network models in previous literature, existing models are not appropriate for real-world computer networks such as the Taiwan Advanced Research and Education Network (TWAREN. This paper proposes a modified stochastic-flow network model to evaluate the network reliability of a practical computer network with multiple sources where data is transmitted through several light paths (LPs. Network reliability is defined as being the probability of delivering a specified amount of data from the sources to the sink. It is taken as a performance index to measure the service level of TWAREN. This paper studies the network reliability of the international portion of TWAREN from two sources (Taipei and Hsinchu to one sink (New York that goes through a submarine and land surface cable between Taiwan and the United States.

Service workload patterns for QoS-driven cloud resource management

OpenAIRE

Zhang, Li; Zhang, Yichuan; Jamshidi, Pooyan; Xu, Lei; Pahl, Claus

2015-01-01

Cloud service providers negotiate SLAs for customer services they offer based on the reliability of performance and availability of their lower-level platform infrastructure. While availability management is more mature, performance management is less reliable. In order to support a continuous approach that supports the initial static infrastructure configuration as well as dynamic reconfiguration and auto-scaling, an accurate and efficient solution is required. We propose a prediction techni...

On Quality of Service Management

National Research Council Canada - National Science Library

Lee, Chen

1999-01-01

A quality of service (QoS) management framework for systems is presented that satisfies application needs along multiple dimensions such as timeliness, reliability, cryptographic security and other application specific quality requirements...

Mapping ecosystem services in the St. Louis River Estuary

Science.gov (United States)

Sustainable management of ecosystems for the perpetual flow of services beneficial to human communities requires reliable data about from where in the ecosystem services flow. Our objective is to map ecosystem services in the St. Louis River with the overarching U.S. EPA goal of ...

Multinomial-exponential reliability function: a software reliability model

International Nuclear Information System (INIS)

Saiz de Bustamante, Amalio; Saiz de Bustamante, Barbara

2003-01-01

The multinomial-exponential reliability function (MERF) was developed during a detailed study of the software failure/correction processes. Later on MERF was approximated by a much simpler exponential reliability function (EARF), which keeps most of MERF mathematical properties, so the two functions together makes up a single reliability model. The reliability model MERF/EARF considers the software failure process as a non-homogeneous Poisson process (NHPP), and the repair (correction) process, a multinomial distribution. The model supposes that both processes are statistically independent. The paper discusses the model's theoretical basis, its mathematical properties and its application to software reliability. Nevertheless it is foreseen model applications to inspection and maintenance of physical systems. The paper includes a complete numerical example of the model application to a software reliability analysis

Coordinated Multi-layer Multi-domain Optical Network (COMMON) for Large-Scale Science Applications (COMMON)

Energy Technology Data Exchange (ETDEWEB)

Vokkarane, Vinod [University of Massachusetts

2013-09-01

We intend to implement a Coordinated Multi-layer Multi-domain Optical Network (COMMON) Framework for Large-scale Science Applications. In the COMMON project, specific problems to be addressed include 1) anycast/multicast/manycast request provisioning, 2) deployable OSCARS enhancements, 3) multi-layer, multi-domain quality of service (QoS), and 4) multi-layer, multidomain path survivability. In what follows, we outline the progress in the above categories (Year 1, 2, and 3 deliverables).

Linking employee perceptions of collective efficacy in self-managing service teams with customer-perceived service quality : a psychometric assessment

NARCIS (Netherlands)

Jong, de A.; Wetzels, M.G.M.; Ruyter, de J.C.

2008-01-01

Purpose – The purpose of this paper is to investigate the linkage between self-managing team (SMT) member perceptions of collective efficacy and customer-perceived service quality, and the most cost-efficient way to reliably assess collective efficacy and customer-perceived service quality, using

Multi-state reliability for coolant pump based on dependent competitive failure model

International Nuclear Information System (INIS)

Shang Yanlong; Cai Qi; Zhao Xinwen; Chen Ling

2013-01-01

By taking into account the effect of degradation due to internal vibration and external shocks. and based on service environment and degradation mechanism of nuclear power plant coolant pump, a multi-state reliability model of coolant pump was proposed for the system that involves competitive failure process between shocks and degradation. Using this model, degradation state probability and system reliability were obtained under the consideration of internal vibration and external shocks for the degraded coolant pump. It provided an effective method to reliability analysis for coolant pump in nuclear power plant based on operating environment. The results can provide a decision making basis for design changing and maintenance optimization. (authors)

Retail banking service quality: A client perception study

Directory of Open Access Journals (Sweden)

Mbablemhle Bhengu

2016-11-01

Full Text Available The retail banking sector in South Africa is predominantly characterised by a high face to face interaction and constant product and pricing differentiation. In order for a bank to distinguish itself from other banks in the banking industry, it uses excellence in its service quality to stand out against its competitors. In the study, the researchers adapted the SERVQUAL model to the banking industry. A probability sampling technique was employed for the study. Simple random sampling was employed to test MBA students’ perceptions towards service quality in the banking industry. The findings in the empirical study revealed that MBA students at the university were dissatisfied with the quality of service offerings provided by the retail banks in South Africa. There were quality gaps revealed in tangibles, reliability, empathy, responsiveness and reliability aspects of the service encounters

75 FR 50853 - Special Conditions: Cirrus Design Corporation Model SF50 Airplane; Function and Reliability Testing

Science.gov (United States)

2010-08-18

... airplanes. 1. Function and Reliability Testing. Flight tests: In place of 14 CFR 21.35(b)(2), the following...; Function and Reliability Testing AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Final special... to CAR part 3 became effective January 15, 1951, and deleted the service test requirements in Section...

An attempt to use FMEA method for an approximate reliability assessment of machinery

Directory of Open Access Journals (Sweden)

Przystupa Krzysztof

2017-01-01

Full Text Available The paper presents a modified FMEA (Failure Mode and Effect Analysis method to assess reliability of the components that make up a wrench type 2145: MAX Impactol TM Driver Ingersoll Rand Company. This case concerns the analysis of reliability in conditions, when full service data is not known. The aim of the study is to determine the weakest element in the design of the tool.

reliability reliability

African Journals Online (AJOL)

eobe

Corresponding author, Tel: +234-703. RELIABILITY .... V , , given by the code of practice. However, checks must .... an optimization procedure over the failure domain F corresponding .... of Concrete Members based on Utility Theory,. Technical ...

Reliability of structures of industrial installations. Theory and applications of probabilistic mechanics

International Nuclear Information System (INIS)

Procaccia, H.; Morilhat, P.; Carle, R.; Menjon, G.

1996-01-01

The management of the service life of mechanical materials implies an evaluation of their risk of failure during their use. To evaluate this risk the following methods are used: the classical frequency statistics applied to experience feedback data concerning failures noticed during operation of active parts (pumps, valves, exchangers, circuit breakers etc..); the Bayesian approach in the case of scarce statistical data and when experts are needed to compensate the lack of information; the structures reliability approach when no data are available and when a theoretical model of degradation must be used, in particular for passive structures (pressure vessels, pipes, tanks, etc..). The aim of this book is to describe the principles and applications of this third approach to industrial installations. Chapter 1 recalls the historical aspects of the probabilistic approach to the reliability of structures and the existing codes. Chapter 2 presents the level 1 deterministic method applied so far for the conceiving of passive structures. The Cornell reliability index, already used in civil engineering codes, is defined in chapter 3. The Hasofer and Lind reliability index, a generalization of the Cornell index, is defined in chapter 4. Chapter 5 concerns the application of probabilistic approaches to optimization studies with the introduction of the economical variables linked to the risk and the possible actions to limit this risk (in-service inspection, maintenance, repairing etc..). Chapters 6 and 7 describe the Monte Carlo simulation and approximation methods for failure probabilistic calculations, and recall the fracture mechanics basis and the models of load and degradation of industrial installations. Some applications are given in chapter 9 with the cases of the safety margins quantization of a fissured pipe and the optimizing of the in-service inspection policy of a steam generator. Chapter 10 raises the problem of the coupling between mechanical and reliability

effect of uncertainty on the fatigue reliability of reinforced concrete ...

African Journals Online (AJOL)

In this paper, a reliability time-variant fatigue analysis and uncertainty effect on the serviceability of reinforced concrete bridge deck was carried out. A simply supported 15m bridge deck was specifically used for the investigation. Mathematical models were developed and the uncertainties in structural resistance, applied ...

Database reliability engineering designing and operating resilient database systems

CERN Document Server

Campbell, Laine

2018-01-01

The infrastructure-as-code revolution in IT is also affecting database administration. With this practical book, developers, system administrators, and junior to mid-level DBAs will learn how the modern practice of site reliability engineering applies to the craft of database architecture and operations. Authors Laine Campbell and Charity Majors provide a framework for professionals looking to join the ranks of today’s database reliability engineers (DBRE). You’ll begin by exploring core operational concepts that DBREs need to master. Then you’ll examine a wide range of database persistence options, including how to implement key technologies to provide resilient, scalable, and performant data storage and retrieval. With a firm foundation in database reliability engineering, you’ll be ready to dive into the architecture and operations of any modern database. This book covers: Service-level requirements and risk management Building and evolving an architecture for operational visibility ...

Measuring reliability under epistemic uncertainty: Review on non-probabilistic reliability metrics

Directory of Open Access Journals (Sweden)

Kang Rui

2016-06-01

Full Text Available In this paper, a systematic review of non-probabilistic reliability metrics is conducted to assist the selection of appropriate reliability metrics to model the influence of epistemic uncertainty. Five frequently used non-probabilistic reliability metrics are critically reviewed, i.e., evidence-theory-based reliability metrics, interval-analysis-based reliability metrics, fuzzy-interval-analysis-based reliability metrics, possibility-theory-based reliability metrics (posbist reliability and uncertainty-theory-based reliability metrics (belief reliability. It is pointed out that a qualified reliability metric that is able to consider the effect of epistemic uncertainty needs to (1 compensate the conservatism in the estimations of the component-level reliability metrics caused by epistemic uncertainty, and (2 satisfy the duality axiom, otherwise it might lead to paradoxical and confusing results in engineering applications. The five commonly used non-probabilistic reliability metrics are compared in terms of these two properties, and the comparison can serve as a basis for the selection of the appropriate reliability metrics.