A reliable, fast and low cost maximum power point tracker for photovoltaic applications

Energy Technology Data Exchange (ETDEWEB)

Enrique, J.M.; Andujar, J.M.; Bohorquez, M.A. [Departamento de Ingenieria Electronica, de Sistemas Informaticos y Automatica, Universidad de Huelva (Spain)

2010-01-15

This work presents a new maximum power point tracker system for photovoltaic applications. The developed system is an analog version of the ''P and O-oriented'' algorithm. It maintains its main advantages: simplicity, reliability and easy practical implementation, and avoids its main disadvantages: inaccurateness and relatively slow response. Additionally, the developed system can be implemented in a practical way at a low cost, which means an added value. The system also shows an excellent behavior for very fast variables in incident radiation levels. (author)

Efficiency of Individual Tree Detection Approaches Based on Light-Weight and Low-Cost UAS Imagery in Australian Savannas

Directory of Open Access Journals (Sweden)

Grigorijs Goldbergs

2018-01-01

Full Text Available The reliability of airborne light detection and ranging (LiDAR for delineating individual trees and estimating aboveground biomass (AGB has been proven in a diverse range of ecosystems, but can be difficult and costly to commission. Point clouds derived from structure from motion (SfM matching techniques obtained from unmanned aerial systems (UAS could be a feasible low-cost alternative to airborne LiDAR scanning for canopy parameter retrieval. This study assesses the extent to which SfM three-dimensional (3D point clouds—obtained from a light-weight mini-UAS quadcopter with an inexpensive consumer action GoPro camera—can efficiently and effectively detect individual trees, measure tree heights, and provide AGB estimates in Australian tropical savannas. Two well-established canopy maxima and watershed segmentation tree detection algorithms were tested on canopy height models (CHM derived from SfM imagery. The influence of CHM spatial resolution on tree detection accuracy was analysed, and the results were validated against existing high-resolution airborne LiDAR data. We found that the canopy maxima and watershed segmentation routines produced similar tree detection rates (~70% for dominant and co-dominant trees, but yielded low detection rates (<35% for suppressed and small trees due to poor representativeness in point clouds and overstory occlusion. Although airborne LiDAR provides higher tree detection rates and more accurate estimates of tree heights, we found SfM image matching to be an adequate low-cost alternative for the detection of dominant and co-dominant tree stands.

Strength and Reliability of Wood for the Components of Low-cost Wind Turbines: Computational and Experimental Analysis and Applications

DEFF Research Database (Denmark)

Mishnaevsky, Leon; Freere, Peter; Sharma, Ranjan

2009-01-01

of experiments and computational investigations. Low cost testing machines have been designed, and employed for the systematic analysis of different sorts of Nepali wood, to be used for the wind turbine construction. At the same time, computational micromechanical models of deformation and strength of wood......This paper reports the latest results of the comprehensive program of experimental and computational analysis of strength and reliability of wooden parts of low cost wind turbines. The possibilities of prediction of strength and reliability of different types of wood are studied in the series...... are developed, which should provide the basis for microstructure-based correlating of observable and service properties of wood. Some correlations between microstructure, strength and service properties of wood have been established....

Low cost solar air heater

International Nuclear Information System (INIS)

Gill, R.S.; Singh, Sukhmeet; Singh, Parm Pal

2012-01-01

Highlights: ► Single glazed low cost solar air heater is more efficient during summer while double glazed is better in winter. ► For the same initial investment, low cost solar air heaters collect more energy than packed bed solar air heater. ► During off season low cost solar air heater can be stored inside as it is light in weight. - Abstract: Two low cost solar air heaters viz. single glazed and double glazed were designed, fabricated and tested. Thermocole, ultraviolet stabilised plastic sheet, etc. were used for fabrication to reduce the fabrication cost. These were tested simultaneously at no load and with load both in summer and winter seasons along with packed bed solar air heater using iron chips for absorption of radiation. The initial costs of single glazed and double glazed are 22.8% and 26.8% of the initial cost of packed bed solar air heater of the same aperture area. It was found that on a given day at no load, the maximum stagnation temperatures of single glazed and double glazed solar air heater were 43.5 °C and 62.5 °C respectively. The efficiencies of single glazed, double glazed and packed bed solar air heaters corresponding to flow rate of 0.02 m 3 /s-m 2 were 30.29%, 45.05% and 71.68% respectively in winter season. The collector efficiency factor, heat removal factor based on air outlet temperature and air inlet temperature for three solar air heaters were also determined.

Design for low-power and reliable flexible electronics

Science.gov (United States)

Huang, Tsung-Ching (Jim)

Flexible electronics are emerging as an alternative to conventional Si electronics for large-area low-cost applications such as e-paper, smart sensors, and disposable RFID tags. By utilizing inexpensive manufacturing methods such as ink-jet printing and roll-to-roll imprinting, flexible electronics can be made on low-cost plastics just like printing a newspaper. However, the key elements of exible electronics, thin-film transistors (TFTs), have slower operating speeds and less reliability than their Si electronics counterparts. Furthermore, depending on the material property, TFTs are usually mono-type -- either p- or n-type -- devices. Making air-stable complementary TFT circuits is very challenging and not applicable to most TFT technologies. Existing design methodologies for Si electronics, therefore, cannot be directly applied to exible electronics. Other inhibiting factors such as high supply voltage, large process variation, and lack of trustworthy device modeling also make designing larger-scale and robust TFT circuits a significant challenge. The major goal of this dissertation is to provide a viable solution for robust circuit design in exible electronics. I will first introduce a reliability simulation framework that can predict the degraded TFT circuits' performance under bias-stress. This framework has been validated using the amorphous-silicon (a-Si) TFT scan driver for TFT-LCD displays. To reuse the existing CMOS design ow for exible electronics, I propose a Pseudo-CMOS cell library that can make TFT circuits operable under low supply voltage and which has post-fabrication tunability for reliability and performance enhancement. This cell library has been validated using 2V self-assembly-monolayer (SAM) organic TFTs with a low-cost shadow-mask deposition process. I will also demonstrate a 3-bit 1.25KS/s Flash ADC in a-Si TFTs, which is based on the proposed Pseudo-CMOS cell library, and explore more possibilities in display, energy, and sensing

Correlates of Low Birth Weight

Directory of Open Access Journals (Sweden)

Ankur Barua MD, PhD

2014-12-01

Full Text Available Background. Low birth weight is the single most important factor that determines the chances of child survival. A recent annual estimation indicated that nearly 8 million infants are born with low birth weight in India. The infant mortality rate is about 20 times greater for all low birth weight babies. Methods. A matched case–control study was conducted on 130 low birth weight babies and 130 controls for 12 months (from August 1, 2007, to July 31, 2008 at the Central Referral Hospital, Tadong, East District of Sikkim, India. Data were analyzed using the Statistical Package for Social Sciences, version 10.0 for Windows. Chi-square test and multiple logistic regression were applied. A P value less than .05 was considered as significant. Results. In the first phase of this study, 711 newborn babies, borne by 680 mothers, were screened at the Central Referral Hospital of Sikkim during the 1-year study period, and the proportion of low birth weight babies was determined to be 130 (18.3%. Conclusion. Multiple logistic regression analysis, conducted in the second phase, revealed that low or middle socioeconomic status, maternal underweight, twin pregnancy, previous history of delivery of low birth weight babies, smoking and consumption of alcohol during pregnancy, and congenital anomalies had independent significant association with low birth weight in this study population.

Low Carbon-Oriented Optimal Reliability Design with Interval Product Failure Analysis and Grey Correlation Analysis

Directory of Open Access Journals (Sweden)

Yixiong Feng

2017-03-01

Full Text Available The problem of large amounts of carbon emissions causes wide concern across the world, and it has become a serious threat to the sustainable development of the manufacturing industry. The intensive research into technologies and methodologies for green product design has significant theoretical meaning and practical value in reducing the emissions of the manufacturing industry. Therefore, a low carbon-oriented product reliability optimal design model is proposed in this paper: (1 The related expert evaluation information was prepared in interval numbers; (2 An improved product failure analysis considering the uncertain carbon emissions of the subsystem was performed to obtain the subsystem weight taking the carbon emissions into consideration. The interval grey correlation analysis was conducted to obtain the subsystem weight taking the uncertain correlations inside the product into consideration. Using the above two kinds of subsystem weights and different caution indicators of the decision maker, a series of product reliability design schemes is available; (3 The interval-valued intuitionistic fuzzy sets (IVIFSs were employed to select the optimal reliability and optimal design scheme based on three attributes, namely, low carbon, correlation and functions, and economic cost. The case study of a vertical CNC lathe proves the superiority and rationality of the proposed method.

Social causes of low birth weight.

OpenAIRE

Kogan, M D

1995-01-01

The manifest importance of reducing the incidence of low birth weight is most obvious for the first year of life: low birth weight is the single most important factor affecting infant morbidity and mortality. However, there is growing evidence that the adverse consequences of low birth weight continue throughout the life cycle. This review deals primarily with social causes of low birth weight.

The OPEnSampler: A Low-Cost, Low-Weight, Customizable and Modular Open Source 24-Unit Automatic Water Sampler

Science.gov (United States)

Nelke, M.; Selker, J. S.; Udell, C.

2017-12-01

Reliable automatic water samplers allow repetitive sampling of various water sources over long periods of time without requiring a researcher on site, reducing human error as well as the monetary and time costs of traveling to the field, particularly when the scale of the sample period is hours or days. The high fixed cost of buying a commercial sampler with little customizability can be a barrier to research requiring repetitive samples, such as the analysis of septic water pre- and post-treatment. DIY automatic samplers proposed in the past sacrifice maximum volume, customizability, or scope of applications, among other features, in exchange for a lower net cost. The purpose of this project was to develop a low-cost, highly customizable, robust water sampler that is capable of sampling many sources of water for various analytes. A lightweight aluminum-extrusion frame was designed and assembled, chosen for its mounting system, strength, and low cost. Water is drawn from two peristaltic pumps through silicone tubing and directed into 24 foil-lined 250mL bags using solenoid valves. A programmable Arduino Uno microcontroller connected to a circuit board communicates with a battery operated real-time clock, initiating sampling stages. Period and volume settings are programmable in-field by the user via serial commands. The OPEnSampler is an open design, allowing the user to decide what components to use and the modular theme of the frame allows fast mounting of new manufactured or 3D printed components. The 24-bag system weighs less than 10kg and the material cost is under $450. Up to 6L of sample water can be drawn at a rate of 100mL/minute in either direction. Faster flowrates are achieved by using more powerful peristaltic pumps. Future design changes could allow a greater maximum volume by filling the unused space with more containers and adding GSM communications to send real time status information.

Low-Cost Servomotor Driver for PFM Control.

Science.gov (United States)

Aragon-Jurado, David; Morgado-Estevez, Arturo; Perez-Peña, Fernando

2017-12-31

Servomotors have already been around for some decades and they are extremely popular among roboticists due to their simple control technique, reliability and low-cost. They are usually controlled by using Pulse Width Modulation (PWM) and this paper aims to keep the idea of simplicity and low-cost, while introducing a new control technique: Pulse Frequency Modulation (PFM). The objective of this paper is to focus on our development of a low-cost servomotor controller which will allow the research community to use them with PFM. A low-cost commercial servomotor is used as the base system for the development: a small PCB that fits inside the case and allocates all the electronic components to control the motor has been designed to replace the original. The potentiometer is retained as the feedback sensor and a microcontroller is responsible for controlling the position of the motor. The paper compares the performance of a PWM and a PFM controlled servomotor. The comparison shows that the servomotor with our controller achieves a faster mechanism for switching targets and a lower latency. This controller can be used with neuromorphic systems to remove the conversion from events to PWM.

An alternative to the balance error scoring system: using a low-cost balance board to improve the validity/reliability of sports-related concussion balance testing.

Science.gov (United States)

Chang, Jasper O; Levy, Susan S; Seay, Seth W; Goble, Daniel J

2014-05-01

Recent guidelines advocate sports medicine professionals to use balance tests to assess sensorimotor status in the management of concussions. The present study sought to determine whether a low-cost balance board could provide a valid, reliable, and objective means of performing this balance testing. Criterion validity testing relative to a gold standard and 7 day test-retest reliability. University biomechanics laboratory. Thirty healthy young adults. Balance ability was assessed on 2 days separated by 1 week using (1) a gold standard measure (ie, scientific grade force plate), (2) a low-cost Nintendo Wii Balance Board (WBB), and (3) the Balance Error Scoring System (BESS). Validity of the WBB center of pressure path length and BESS scores were determined relative to the force plate data. Test-retest reliability was established based on intraclass correlation coefficients. Composite scores for the WBB had excellent validity (r = 0.99) and test-retest reliability (R = 0.88). Both the validity (r = 0.10-0.52) and test-retest reliability (r = 0.61-0.78) were lower for the BESS. These findings demonstrate that a low-cost balance board can provide improved balance testing accuracy/reliability compared with the BESS. This approach provides a potentially more valid/reliable, yet affordable, means of assessing sports-related concussion compared with current methods.

Low-Weight, Durable, and Low-Cost Metal Rubber Sensor System for Ultra Long Duration Scientific Balloons, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — NanoSonic proposes to develop an innovative, low-cost, ultra low mass density, and non-intrusive sensor system for ultra long duration balloons (ULDB) that will...

Digital Image Quantitative Evaluations for Low Cost Film Digitizers Height Determination

International Nuclear Information System (INIS)

Khairul Anuar Mohd Salleh; Arshad Yassin; Ahmad Nasir Yusof; Noorhazleena Azaman

2016-01-01

Non Destructive Testing (NDT) technology contributes significant improvement to the quality of industrial products, and the integrity of equipment and plants. Introduction of powerful computers and reliable imaging technology has had significant impact on the traditional nuclear based NDT technology. Demand for faster, reliable, low cost, and flexible technology is rapidly increased. With the growing demand for more efficient digital archiving, digital image analysis, and reporting results with a low cost technology, one cannot deny the importance of having another cheaper solution. This project will apply fundamental principle of image digitization to be used in building up a low cost film digitization solution. The height of the film digitization was carefully determined by examining each digital images produced. Three (3) repetitive quantitative evaluations (Modulation Transfer Function [MTF], Characteristic Transfer Curve [CTC], and Contrast to Noise Ratio [CNR]) were performed at different condition to assist with the determination of the low cost film digitizers height. All 3 evaluations were successfully applied and the most appropriate height was successfully determined. (author)

Contribution of low Birth –Weight and Very Low Birth Weight Infants ...

African Journals Online (AJOL)

Objective: To determine the association between low and very low birth weight infants and perinatal mortality at the University of Nigeria Teaching Hospital, Enugu. Methods: A retrospective study of the hospital records in the labour ward and the Newborn Special Care Unit (N.B.S.C.U), of the UNTH was carried out for the ...

Low cost submarine robot

Directory of Open Access Journals (Sweden)

Ponlachart Chotikarn

2010-10-01

Full Text Available A submarine robot is a semi-autonomous submarine robot used mainly for marine environmental research. We aim todevelop a low cost, semi-autonomous submarine robot which is able to travel underwater. The robot’s structure was designedand patented using a novel idea of the diving system employing a volume adjustment mechanism to vary the robot’s density.A light weight, flexibility and small structure provided by PVC can be used to construct the torpedo-liked shape robot.Hydraulic seal and O-ring rubbers are used to prevent water leaking. This robot is controlled by a wired communicationsystem.

[The kangaroo mothers' programme: a simple and cost-effective alternative for protecting the premature newborn or low-birth-weight babies].

Science.gov (United States)

Lizarazo-Medina, Jenny P; Ospina-Diaz, Juan M; Ariza-Riaño, Nelly E

2012-06-01

Describing the efficacy and achievements of the kangaroo mothers' programme (KMP) regarding preterm or low-birth-weight babies' health and development in Hospital San Rafael in Tunja from November 2007 to December 2009. This was a retrospective observational cohort study; 374 infants born prematurely or having low-birth-weight were included to assess household socio-demographic factors, maternal and obstetric history, delivery characteristics and complications and follow-up until 40 weeks post-conception age. There was a high prevalence of teenage pregnancy (17.5 %) and in women older than 35 years (12.6 %), unwanted pregnancy (40.6 %), low quality and poor availability of food in families, complications such as preeclampsia, infection and premature rupture of membranes, 1,969 grams average birth weight, 2,742.9 grams average weight on discharge and 22 grams average weight gain per day. It was found that KMP methodology substantially improved the mothers' psychological aspects and health status and the newborns' prognosis and led to stabilising body temperature and weight gain rate while decreasing risks of complications and nosocomial infection. It also lowered health care costs and shortened hospital stay.

Disease Human - MDC_LowBirthWeight

Data.gov (United States)

NSGIC Local Govt | GIS Inventory — Polygon feature class based on Zip Code boundaries showing the percentage of babies born in Miami-Dade County in 2006 with low birth weights. Low birth weight is...

Low Cost, High Efficiency, High Pressure Hydrogen Storage

Energy Technology Data Exchange (ETDEWEB)

Mark Leavitt

2010-03-31

A technical and design evaluation was carried out to meet DOE hydrogen fuel targets for 2010. These targets consisted of a system gravimetric capacity of 2.0 kWh/kg, a system volumetric capacity of 1.5 kWh/L and a system cost of $4/kWh. In compressed hydrogen storage systems, the vast majority of the weight and volume is associated with the hydrogen storage tank. In order to meet gravimetric targets for compressed hydrogen tanks, 10,000 psi carbon resin composites were used to provide the high strength required as well as low weight. For the 10,000 psi tanks, carbon fiber is the largest portion of their cost. Quantum Technologies is a tier one hydrogen system supplier for automotive companies around the world. Over the course of the program Quantum focused on development of technology to allow the compressed hydrogen storage tank to meet DOE goals. At the start of the program in 2004 Quantum was supplying systems with a specific energy of 1.1-1.6 kWh/kg, a volumetric capacity of 1.3 kWh/L and a cost of $73/kWh. Based on the inequities between DOE targets and Quantum’s then current capabilities, focus was placed first on cost reduction and second on weight reduction. Both of these were to be accomplished without reduction of the fuel system’s performance or reliability. Three distinct areas were investigated; optimization of composite structures, development of “smart tanks” that could monitor health of tank thus allowing for lower design safety factor, and the development of “Cool Fuel” technology to allow higher density gas to be stored, thus allowing smaller/lower pressure tanks that would hold the required fuel supply. The second phase of the project deals with three additional distinct tasks focusing on composite structure optimization, liner optimization, and metal.

A reliable low-cost wireless and wearable gait monitoring system based on a plastic optical fibre sensor

International Nuclear Information System (INIS)

Bilro, L; Pinto, J L; Oliveira, J G; Nogueira, R N

2011-01-01

A wearable and wireless system designed to evaluate quantitatively the human gait is presented. It allows knee sagittal motion monitoring over long distances and periods with a portable and low-cost package. It is based on the measurement of transmittance changes when a side-polished plastic optical fibre is bent. Four voluntary healthy subjects, on five different days, were tested in order to assess inter-day and inter-subject reliability. Results have shown that this technique is reliable, allows a one-time calibration and is suitable in the diagnosis and rehabilitation of knee injuries or for monitoring the performance of competitive athletes. Environmental testing was accomplished in order to study the influence of different temperatures and humidity conditions

Low Birth Weight, Very Low Birth Weight Rates and Gestational Age-Specific Birth Weight Distribution of Korean Newborn Infants

OpenAIRE

Shin, Son-Moon; Chang, Young-Pyo; Lee, Eun-Sil; Lee, Young-Ah; Son, Dong-Woo; Kim, Min-Hee; Choi, Young-Ryoon

2005-01-01

To obtain the low birth weight (LBW) rate, the very low birth weight (VLBW) rate, and gestational age (GA)-specific birth weight distribution based on a large population in Korea, we collected and analyzed the birth data of 108,486 live births with GA greater than 23 weeks for 1 yr from 1 January to 31 December 2001, from 75 hospitals and clinics located in Korea. These data included birth weight, GA, gender of the infants, delivery type, maternal age, and the presence of multiple pregnancy. ...

Weight Loss at a Cost: Implications of High-Protein, Low- Carbohydrate Diets.

Science.gov (United States)

Gabel, Kathe A.; Lund, Robin J.

2002-01-01

Addresses three claims of high-protein, low-carbohydrate diets: weight loss is attributed to the composition of the diet; insulin promotes the storage of fat, thereby, by limiting carbohydrates, dieters will decrease levels of insulin and body fat; and weight loss is the result of fat loss. The paper examines relevant scientific reports and notes…

Optimized Interface Diversity for Ultra-Reliable Low Latency Communication (URLLC)

DEFF Research Database (Denmark)

Nielsen, Jimmy Jessen; Liu, Rongkuan; Popovski, Petar

2017-01-01

An important ingredient of the future 5G systems will be Ultra-Reliable Low-Latency Communication (URLLC). A way to offer URLLC without intervention in the baseband/PHY layer design is to use interface diversity and integrate multiple communication interfaces, each interface based on a different...... technology. Our approach is to use rateless codes to seamlessly distribute coded payload and redundancy data across multiple available communication interfaces. We formulate an optimization problem to find the payload allocation weights that maximize the reliability at specific target latency values...

Joint Attention Development in Low-risk Very Low Birth Weight Infants at Around 18 Months of Age.

Science.gov (United States)

Yamaoka, Noriko; Takada, Satoshi

2016-10-18

The purpose of this study was to clarify the developmental characteristics of joint attention in very low birth weight (VLBW) infants with a low risk of complications. Section B of the Checklist for Autism in Toddlers (CHAT) was administered to 31 VLBW and 45 normal birth weight (NBW) infants aged 18-22 months, while the sessions were recorded with a video camera. A semi-structured observation scale was developed to assess infants' joint attention from the video footage, and was shown to be reliable. VLBW, compared to NBW, infants showed significantly poorer skills in 2 of 4 items on responding to joint attention, and in 6 of 10 items on initiating joint attention. VLBW infants need more clues in order to produce joint attention. The difficulty was attributed to insufficient verbal and fine motor function skills. Continuous follow-up evaluation is essential for both high-risk and low-risk VLBW infants and their parents.

Sliver Solar Cells: High-Efficiency, Low-Cost PV Technology

Directory of Open Access Journals (Sweden)

Evan Franklin

2007-01-01

Full Text Available Sliver cells are thin, single-crystal silicon solar cells fabricated using standard fabrication technology. Sliver modules, composed of several thousand individual Sliver cells, can be efficient, low-cost, bifacial, transparent, flexible, shadow tolerant, and lightweight. Compared with current PV technology, mature Sliver technology will need 10% of the pure silicon and fewer than 5% of the wafer starts per MW of factory output. This paper deals with two distinct challenges related to Sliver cell and Sliver module production: providing a mature and robust Sliver cell fabrication method which produces a high yield of highly efficient Sliver cells, and which is suitable for transfer to industry; and, handling, electrically interconnecting, and encapsulating billions of sliver cells at low cost. Sliver cells with efficiencies of 20% have been fabricated at ANU using a reliable, optimised processing sequence, while low-cost encapsulation methods have been demonstrated using a submodule technique.

Breaking Barriers to Low-Cost Modular Inverter Production & Use

Energy Technology Data Exchange (ETDEWEB)

Bogdan Borowy; Leo Casey; Jerry Foshage; Steve Nichols; Jim Perkinson

2005-05-31

The goal of this cost share contract is to advance key technologies to reduce size, weight and cost while enhancing performance and reliability of Modular Inverter Product for Distributed Energy Resources (DER). Efforts address technology development to meet technical needs of DER market protection, isolation, reliability, and quality. Program activities build on SatCon Technology Corporation inverter experience (e.g., AIPM, Starsine, PowerGate) for Photovoltaic, Fuel Cell, Energy Storage applications. Efforts focused four technical areas, Capacitors, Cooling, Voltage Sensing and Control of Parallel Inverters. Capacitor efforts developed a hybrid capacitor approach for conditioning SatCon's AIPM unit supply voltages by incorporating several types and sizes to store energy and filter at high, medium and low frequencies while minimizing parasitics (ESR and ESL). Cooling efforts converted the liquid cooled AIPM module to an air-cooled unit using augmented fin, impingement flow cooling. Voltage sensing efforts successfully modified the existing AIPM sensor board to allow several, application dependent configurations and enabling voltage sensor galvanic isolation. Parallel inverter control efforts realized a reliable technique to control individual inverters, connected in a parallel configuration, without a communication link. Individual inverter currents, AC and DC, were balanced in the paralleled modules by introducing a delay to the individual PWM gate pulses. The load current sharing is robust and independent of load types (i.e., linear and nonlinear, resistive and/or inductive). It is a simple yet powerful method for paralleling both individual devices dramatically improves reliability and fault tolerance of parallel inverter power systems. A patent application has been made based on this control technology.

A low-cost, high-resolution, video-rate imaging optical radar

Energy Technology Data Exchange (ETDEWEB)

Sackos, J.T.; Nellums, R.O.; Lebien, S.M.; Diegert, C.F. [Sandia National Labs., Albuquerque, NM (United States); Grantham, J.W.; Monson, T. [Air Force Research Lab., Eglin AFB, FL (United States)

1998-04-01

Sandia National Laboratories has developed a unique type of portable low-cost range imaging optical radar (laser radar or LADAR). This innovative sensor is comprised of an active floodlight scene illuminator and an image intensified CCD camera receiver. It is a solid-state device (no moving parts) that offers significant size, performance, reliability, and simplicity advantages over other types of 3-D imaging sensors. This unique flash LADAR is based on low cost, commercially available hardware, and is well suited for many government and commercial uses. This paper presents an update of Sandia`s development of the Scannerless Range Imager technology and applications, and discusses the progress that has been made in evolving the sensor into a compact, low, cost, high-resolution, video rate Laser Dynamic Range Imager.

Ultra High Brightness/Low Cost Fiber Coupled Packaging, Phase II

Data.gov (United States)

National Aeronautics and Space Administration — High peak power, high efficiency, high reliability lightweight, low cost QCW laser diode pump modules with up to 1000W of QCW output become possible with nLight's...

Unsynchronized scanning with a low-cost laser range finder for real-time range imaging

Science.gov (United States)

Hatipoglu, Isa; Nakhmani, Arie

2017-06-01

Range imaging plays an essential role in many fields: 3D modeling, robotics, heritage, agriculture, forestry, reverse engineering. One of the most popular range-measuring technologies is laser scanner due to its several advantages: long range, high precision, real-time measurement capabilities, and no dependence on lighting conditions. However, laser scanners are very costly. Their high cost prevents widespread use in applications. Due to the latest developments in technology, now, low-cost, reliable, faster, and light-weight 1D laser range finders (LRFs) are available. A low-cost 1D LRF with a scanning mechanism, providing the ability of laser beam steering for additional dimensions, enables to capture a depth map. In this work, we present an unsynchronized scanning with a low-cost LRF to decrease scanning period and reduce vibrations caused by stop-scan in synchronized scanning. Moreover, we developed an algorithm for alignment of unsynchronized raw data and proposed range image post-processing framework. The proposed technique enables to have a range imaging system for a fraction of the price of its counterparts. The results prove that the proposed method can fulfill the need for a low-cost laser scanning for range imaging for static environments because the most significant limitation of the method is the scanning period which is about 2 minutes for 55,000 range points (resolution of 250x220 image). In contrast, scanning the same image takes around 4 minutes in synchronized scanning. Once faster, longer range, and narrow beam LRFs are available, the methods proposed in this work can produce better results.

Hybrids - Best of both worlds. [liquid and solid propellants mated for safe reliable and low cost launch vehicles

Science.gov (United States)

Goldberg, Ben E.; Wiley, Dan R.

1991-01-01

An overview is presented of hybrid rocket propulsion systems whereby combining solids and liquids for launch vehicles could produce a safe, reliable, and low-cost product. The primary subsystems of a hybrid system consist of the oxidizer tank and feed system, an injector system, a solid fuel grain enclosed in a pressure vessel case, a mixing chamber, and a nozzle. The hybrid rocket has an inert grain, which reduces costs of development, transportation, manufacturing, and launch by avoiding many safety measures that must be taken when operating with solids. Other than their use in launch vehicles, hybrids are excellent for simulating the exhaust of solid rocket motors for material development.

Low-cost high purity production

Science.gov (United States)

Kapur, V. K.

1978-01-01

Economical process produces high-purity silicon crystals suitable for use in solar cells. Reaction is strongly exothermic and can be initiated at relatively low temperature, making it potentially suitable for development into low-cost commercial process. Important advantages include exothermic character and comparatively low process temperatures. These could lead to significant savings in equipment and energy costs.

Low-cost inertial measurement unit.

Energy Technology Data Exchange (ETDEWEB)

Deyle, Travis Jay

2005-03-01

Sandia National Laboratories performs many expensive tests using inertial measurement units (IMUs)--systems that use accelerometers, gyroscopes, and other sensors to measure flight dynamics in three dimensions. For the purpose of this report, the metrics used to evaluate an IMU are cost, size, performance, resolution, upgradeability and testing. The cost of a precision IMU is very high and can cost hundreds of thousands of dollars. Thus the goals and results of this project are as follows: (1) Examine the data flow in an IMU and determine a generic IMU design. (2) Discuss a high cost IMU implementation and its theoretically achievable results. (3) Discuss design modifications that would save money for suited applications. (4) Design and implement a low cost IMU and discuss its theoretically achievable results. (5) Test the low cost IMU and compare theoretical results with empirical results. (6) Construct a more streamlined printed circuit board design reducing noise, increasing capabilities, and constructing a self-contained unit. Using these results, we can compare a high cost IMU versus a low cost IMU using the metrics from above. Further, we can examine and suggest situations where a low cost IMU could be used instead of a high cost IMU for saving cost, size, or both.

Low-cost solution to the grid reliability problem with 100% penetration of intermittent wind, water, and solar for all purposes.

Science.gov (United States)

Jacobson, Mark Z; Delucchi, Mark A; Cameron, Mary A; Frew, Bethany A

2015-12-08

This study addresses the greatest concern facing the large-scale integration of wind, water, and solar (WWS) into a power grid: the high cost of avoiding load loss caused by WWS variability and uncertainty. It uses a new grid integration model and finds low-cost, no-load-loss, nonunique solutions to this problem on electrification of all US energy sectors (electricity, transportation, heating/cooling, and industry) while accounting for wind and solar time series data from a 3D global weather model that simulates extreme events and competition among wind turbines for available kinetic energy. Solutions are obtained by prioritizing storage for heat (in soil and water); cold (in ice and water); and electricity (in phase-change materials, pumped hydro, hydropower, and hydrogen), and using demand response. No natural gas, biofuels, nuclear power, or stationary batteries are needed. The resulting 2050-2055 US electricity social cost for a full system is much less than for fossil fuels. These results hold for many conditions, suggesting that low-cost, reliable 100% WWS systems should work many places worldwide.

Solid State Inflation Balloon Active Deorbiter: Scalable Low-Cost Deorbit System for Small Satellites

Science.gov (United States)

Huang, Adam

2016-01-01

The goal of the Solid State Inflation Balloon Active Deorbiter project is to develop and demonstrate a scalable, simple, reliable, and low-cost active deorbiting system capable of controlling the downrange point of impact for the full-range of small satellites from 1 kg to 180 kg. The key enabling technology being developed is the Solid State Gas Generator (SSGG) chip, generating pure nitrogen gas from sodium azide (NaN3) micro-crystals. Coupled with a metalized nonelastic drag balloon, the complete Solid State Inflation Balloon (SSIB) system is capable of repeated inflation/deflation cycles. The SSGG minimizes size, weight, electrical power, and cost when compared to the current state of the art.

Technology for low cost solid rocket boosters.

Science.gov (United States)

Ciepluch, C.

1971-01-01

A review of low cost large solid rocket motors developed at the Lewis Research Center is given. An estimate is made of the total cost reduction obtainable by incorporating this new technology package into the rocket motor design. The propellant, case material, insulation, nozzle ablatives, and thrust vector control are discussed. The effect of the new technology on motor cost is calculated for a typical expandable 260-in. booster application. Included in the cost analysis is the influence of motor performance variations due to specific impulse and weight changes. It is found for this application that motor costs may be reduced by up to 30% and that the economic attractiveness of future large solid rocket motors will be improved when the new technology is implemented.

Mars Relay Satellite: Key to Enabling Low-Cost Exploration Missions

Science.gov (United States)

Hastrup, R.; Cesarone, R.; Miller, A.

1993-01-01

Recently, there has been increasing evidence of a renewed focus on Mars exploration both by NASA and the international community. The thrust of this renewed interest appears to be manifesting itself in numerous low-cost missions employing small, light weight elements, which utilize advanced technologies including integrated microelectronics. A formidable problem facing these low-cost missions is communications with Earth. Providing adequate direct-link performance has very significant impacts on spacecraft power, pointing, mass and overall complexity. Additionally, for elements at or near the surface of Mars, there are serious connectivity constraints, especially at higher latitudes, which lose view of Earth for up to many months at a time. This paper will discuss the role a Mars relay satellite can play in enabling and enhancing low-cost missions to Mars...

Low birth weight in the United States.

Science.gov (United States)

Goldenberg, Robert L; Culhane, Jennifer F

2007-02-01

Pregnancy outcomes in the United States and other developed countries are considerably better than those in many developing countries. However, adverse pregnancy outcomes are generally more common in the United States than in other developed countries. Low-birth-weight infants, born after a preterm birth or secondary to intrauterine growth restriction, account for much of the increased morbidity, mortality, and cost. Wide disparities exist in both preterm birth and growth restriction among different population groups. Poor and black women, for example, have twice the preterm birth rate and higher rates of growth restriction than do most other women. Low birth weight in general is thought to place the infant at greater risk of later adult chronic medical conditions, such as diabetes, hypertension, and heart disease. Of interest, maternal thinness is a strong predictor of both preterm birth and fetal growth restriction. However, in the United States, several nutritional interventions, including high-protein diets, caloric supplementation, calcium and iron supplementation, and various other vitamin and mineral supplementations, have not generally reduced preterm birth or growth restriction. Bacterial intrauterine infections play an important role in the etiology of the earliest preterm births, but, at least to date, antibiotic treatment either before labor for risk factors such as bacterial vaginosis or during preterm labor have not consistently reduced the preterm birth rate. Most interventions have failed to reduce preterm birth or growth restriction. The substantial improvement in newborn survival in the United States over the past several decades is mostly due to better access to improved neonatal care for low-birth-weight infants.

LCX: Proposal for a low-cost commercial transport

Science.gov (United States)

Hartman, Troy; Hayatdavoudi, Maziar; Hettinga, Joel; Hooper, Matt; Nguyen, Phong

1994-01-01

The LCX has been developed in response to a request for proposal for an aircraft with 153 passenger capacity and a range of 3000 nautical miles. The goals of the LCX are to provide an aircraft which will achieve the stated mission requirements at the lowest cost possible, both for the manufacturer and the operator. Low cost in this request is defined as short and long term profitability. To achieve this objective, modern technologies attributing to low-cost operation without greatly increasing the cost of manufacturing were employed. These technologies include hybrid laminar flow control and the use of developing new manufacturing processes and philosophies. The LCX will provide a competitive alternative to the use of the Airbus A319/320/321 and the Boeing 737 series of aircraft. The LCX has a maximum weight of 150,000 lb. carried by a wing of 1140 ft(exp 2) and an aspect ratio of 10. The selling price of the LCX is 31 million in 1994 US dollars.

Low-cost distributed solar-thermal-electric power generation

Science.gov (United States)

Der Minassians, Artin; Aschenbach, Konrad H.; Sanders, Seth R.

2004-01-01

Due to their high relative cost, solar electric energy systems have yet to be exploited on a widespread basis. It is believed in the energy community that a technology similar to photovoltaic (PV), but offered at about $1/W would lead to widespread deployment at residential and commercial sites. This paper addresses the investigation and feasibility study of a low-cost solar thermal electricity generation technology, suitable for distributed deployment. Specifically, we discuss a system based on nonimaging solar concentrators, integrated with free-piston Stirling engine devices incorporating integrated electric generation. We target concentrator-collector operation at moderate temperatures, in the range of 125°C to 150°C. This temperature is consistent with use of optical concentrators with concentration ratios on the order of 1-2. These low ratio concentrators admit wide angles of radiation acceptance and are thus compatible with no diurnal tracking, and no or only a few seasonal adjustments. Thus, costs and reliability hazards associated with tracking hardware systems are avoided. Further, we note that in the intended application, there is no shortage of incident solar energy, but rather it is the capital cost of the solar-electric system that is most precious. Thus, we outline a strategy for exploiting solar resources in a cost constrained manner. The paper outlines design issues, and a specific design for an appropriately dimensioned free-piston Stirling engine. Only standard low-cost materials and manufacturing methods are required to realize such a machine.

Evaluation of a Low-Cost Bubble CPAP System Designed for Resource-Limited Settings.

Science.gov (United States)

Bennett, Desmond J; Carroll, Ryan W; Kacmarek, Robert M

2018-04-01

Respiratory compromise is a leading contributor to global neonatal death. CPAP is a method of treatment that helps maintain lung volume during expiration, promotes comfortable breathing, and improves oxygenation. Bubble CPAP is an effective alternative to standard CPAP. We sought to determine the reliability and functionality of a low-cost bubble CPAP device designed for low-resource settings. The low-cost bubble CPAP device was compared to a commercially available bubble CPAP system. The devices were connected to a lung simulator that simulated neonates of 4 different weights with compromised respiratory mechanics (∼1, ∼3, ∼5, and ∼10 kg). The devices' abilities to establish and maintain pressure and flow under normal conditions as well as under conditions of leak were compared. Multiple combinations of pressure levels (5, 8, and 10 cm H 2 O) and flow levels (3, 6, and 10 L/min) were tested. The endurance of both devices was also tested by running the systems continuously for 8 h and measuring the changes in pressure and flow. Both devices performed equivalently during the no-leak and leak trials. While our testing revealed individual differences that were statistically significant and clinically important (>10% difference) within specific CPAP and flow-level settings, no overall comparisons of CPAP or flow were both statistically significant and clinically important. Each device delivered pressures similar to the desired pressures, although the flows delivered by both machines were lower than the set flows in most trials. During the endurance trials, the low-cost device was marginally better at maintaining pressure, while the commercially available device was better at maintaining flow. The low-cost bubble CPAP device evaluated in this study is comparable to a bubble CPAP system used in developed settings. Extensive clinical trials, however, are necessary to confirm its effectiveness. Copyright © 2018 by Daedalus Enterprises.

Low Cost, Low Power, High Sensitivity Magnetometer

Science.gov (United States)

2008-12-01

which are used to measure the small magnetic signals from brain. Other types of vector magnetometers are fluxgate , coil based, and magnetoresistance...concentrator with the magnetometer currently used in Army multimodal sensor systems, the Brown fluxgate . One sees the MEMS fluxgate magnetometer is...Guedes, A.; et al., 2008: Hybrid - LOW COST, LOW POWER, HIGH SENSITIVITY MAGNETOMETER A.S. Edelstein*, James E. Burnette, Greg A. Fischer, M.G

Breastfeeding Trends Among Very Low Birth Weight, Low Birth Weight, and Normal Birth Weight Infants.

Science.gov (United States)

Campbell, Angela G; Miranda, Patricia Y

2018-05-18

To examine the change in breastfeeding behaviors over time, among low birth weight (LBW), very low birth weight (VLBW), and normal birth weight (NBW) infants using nationally representative US data. Univariate statistics and bivariate logistic models were examined using the Early Child Longitudinal Study-Birth Cohort (2001) and National Study of Children's Health (2007 and 2011/2012). Breastfeeding behaviors improved for infants of all birth weights from 2007 to 2011/2012. In 2011/2012, a higher percentage of VLBW infants were ever breastfed compared with LBW and NBW infants. In 2011/2012, LBW infants had a 28% lower odds (95% CI, 0.57-0.92) of ever breastfeeding and a 52% lower odds (95% CI, 0.38-0.61) of breastfeeding for ≥6 months compared with NBW infants. Among black infants, a larger percentage of VLBW infants were breastfed for ≥6 months (26.2%) compared with LBW infants (14.9%). Breastfeeding rates for VLBW and NBW infants have improved over time. Both VLBW and NBW infants are close to meeting the Healthy People 2020 ever breastfeeding goal of 81.9%. LBW infants are farther from this goal than VLBW infants. The results suggest a need for policies that encourage breastfeeding specifically among LBW infants. Copyright © 2018 Elsevier Inc. All rights reserved.

A Low Cost Light Weight Polymer Derived Ceramic Telescope Mirror, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — The primary purpose of this proposal is to develop and demonstrate a new technology for manufacturing an ultra-low-cost precision optical telescope mirror which can...

Pacemaker therapy in low-birth-weight infants.

Science.gov (United States)

Fuchigami, Tai; Nishioka, Masahiko; Akashige, Toru; Shimabukuro, Atsuya; Nagata, Nobuhiro

2018-02-01

Infants born with complete atrioventricular block (CAVB) and fetal bradycardia are frequently born with low birth weight. Three low-birth-weight CAVB infants underwent temporary pacemaker implantation, followed by permanent single-chamber pacemaker implantation at median body weights of 1.7 and 3.2 kg, respectively. All infants caught up with their growth curves and had >3 years of estimated residual battery life. This two-stage strategy was successful in facilitating permanent pacemaker implantation in low-birth-weight babies. Placement of single-chamber pacemaker on the apex of the left ventricle appears to be associated with longer battery lifespan. © 2018 Wiley Periodicals, Inc.

Low energy, low cost, efficient CO{sub 2} capture

Energy Technology Data Exchange (ETDEWEB)

Michael C. Trachtenberg; Lihong Bao; David A. Smith; Remy Dumortier [Carbozyme, Inc., Monmouth Junction, NJ (United States)

2006-07-01

This paper discusses the development and some characteristics of a new, enzyme-based, contained liquid membrane contactor to capture CO{sub 2}. The enzyme carbonic anhydrase catalyzes the removal of CO{sub 2} while the membrane contactor increases the surface area to allow the reduction of the size of the system. The modular system design is easily scaled to any required size reducing the investment costs. The system captures CO{sub 2} at a low energy and low cost promising to be a cost effective technology for CO{sub 2} capture. 5 refs., 7 figs.

Development skills of children born premature with low and very low birth weight.

Science.gov (United States)

Ribeiro, Camila da Costa; Pachelli, Mariane Regina de Oliveira; Amaral, Natalie Camillo de Oliveira; Lamônica, Dionísia Aparecida Cusin

2017-01-30

To compare the performance of children born premature with low birth weight (LBW) and very low birth-weight (VLBW) with that of children born at term, within the age range of one to three years, regarding child development in the gross motor, fine motor-adaptive, personal-social and language domains. This is a cross-sectional study in a cohort of 150 infants born premature (experimental group) and at term (control group) divided into eight groups with respect to weight (low birth weight: motor, fine motor-adaptive, personal-social and language domains. In this study, the preterm groups presented different performances, i.e., normative, average, and below average performances were observed within the same group.

A Study Of Risk Factors For Low Birth Weight

Directory of Open Access Journals (Sweden)

Deswal B S

1999-01-01

Full Text Available Research question: What is the extent of low weight babies born in hospitals and its association with some maternal factors? Objectives: 1. To find an overall prevalence of low birth weight babies amongst hospital births in Meerut city. 2. To identify and quantify the effects of some risk factors for low birth weight. Setting: District women Hospital of Meerut city of western U.P. Study Design: Hospital based matched case-control study. Sample size: 491 low birth weight babies as ‘cases’ and an equal number of babies of normal birth weight in ‘control’ group matched for maternal age, sex of baby, birth order and institution of delivery. Study variables: Socio-economic Status: maternal biological factors including obstetric history: antenatal factors: nutritional factors: history of abortion: toxaemia of pregnancy etc. Results: Overall proportion of low birth weight babies was found to be 21.8% amongst hospital live births and 30.9% born to mothers aged below 30 years of age. Low maternal weight, under nutrition, lack of antenatal care, short inter-pregnancy interval, toxacmia of pregnancy were independent factors increasing the risk of low birth weight significantly. Conclusions: The study suggested that a substantial proportion of low birth weight babies can be averted by improving maternal nutritional status including anemic condition, birth spacing and proper antenatal care.

A study of low-cost reliable actuators for light aircraft. Part A: Chapters 1-8

Science.gov (United States)

Eijsink, H.; Rice, M.

1978-01-01

An analysis involving electro-mechanical, electro-pneumatic, and electro-hydraulic actuators was performed to study which are compatible for use in the primary and secondary flight controls of a single engine light aircraft. Actuator characteristics under investigation include cost, reliability, weight, force, volumetric requirements, power requirements, response characteristics and heat accumulation characteristics. The basic types of actuators were compared for performance characteristics in positioning a control surface model and then were mathematically evaluated in an aircraft to get the closed loop dynamic response characteristics. Conclusions were made as to the suitability of each actuator type for use in an aircraft.

Low profile, low cost, new geometry integrated inductors

DEFF Research Database (Denmark)

Ouyang, Ziwei; Thomsen, Ole Cornelius; Andersen, Michael A. E.

2011-01-01

windings with well-defined thickness. Many advantages and disadvantages are described in depth. In this work, inverse coupling and direct coupling in the new geometry integrated inductors have been analyzed. Coupling characteristic caused by a special saturation behavior has been emphasis. And also...... variable inductors caused by the special saturation behavior may be utilized in some applications. The new integrated inductors make it possible to build low-profile, low-cost, flexibility DC/DC converters, and it can be extensively designed for the low-voltage and high-current required by the modern...

AUTOMATED LOW-COST PHOTOGRAMMETRY FOR FLEXIBLE STRUCTURE MONITORING

Directory of Open Access Journals (Sweden)

C. H. Wang

2012-07-01

Full Text Available Structural monitoring requires instruments which can provide high precision and accuracy, reliable measurements at good temporal resolution and rapid processing speeds. Long-term campaigns and flexible structures are regarded as two of the most challenging subjects in monitoring engineering structures. Long-term monitoring in civil engineering is generally considered to be labourintensive and financially expensive and it can take significant effort to arrange the necessary human resources, transportation and equipment maintenance. When dealing with flexible structure monitoring, it is of paramount importance that any monitoring equipment used is able to carry out rapid sampling. Low cost, automated, photogrammetric techniques therefore have the potential to become routinely viable for monitoring non-rigid structures. This research aims to provide a photogrammetric solution for long-term flexible structural monitoring purposes. The automated approach was achieved using low-cost imaging devices (mobile phones to replace traditional image acquisition stations and substantially reduce the equipment costs. A self-programmed software package was developed to deal with the hardware-software integration and system operation. In order to evaluate the performance of this low-cost monitoring system, a shaking table experiment was undertaken. Different network configurations and target sizes were used to determine the best configuration. A large quantity of image data was captured by four DSLR cameras and four mobile phone cameras respectively. These image data were processed using photogrammetric techniques to calculate the final results for the system evaluation.

IMPLEMENTATION AND TESTING OF LOW COST UAV PLATFORM FOR ORTHOPHOTO IMAGING

Directory of Open Access Journals (Sweden)

D. Brucas

2013-08-01

Full Text Available Implementation of Unmanned Aerial Vehicles for civilian applications is rapidly increasing. Technologies which were expensive and available only for military use have recently spread on civilian market. There is a vast number of low cost open source components and systems for implementation on UAVs available. Using of low cost hobby and open source components ensures considerable decrease of UAV price, though in some cases compromising its reliability. In Space Science and Technology Institute (SSTI in collaboration with Vilnius Gediminas Technical University (VGTU researches have been performed in field of constructing and implementation of small UAVs composed of low cost open source components (and own developments. Most obvious and simple implementation of such UAVs – orthophoto imaging with data download and processing after the flight. The construction, implementation of UAVs, flight experience, data processing and data implementation will be further covered in the paper and presentation.

Implementation and Testing of Low Cost Uav Platform for Orthophoto Imaging

Science.gov (United States)

Brucas, D.; Suziedelyte-Visockiene, J.; Ragauskas, U.; Berteska, E.; Rudinskas, D.

2013-08-01

Implementation of Unmanned Aerial Vehicles for civilian applications is rapidly increasing. Technologies which were expensive and available only for military use have recently spread on civilian market. There is a vast number of low cost open source components and systems for implementation on UAVs available. Using of low cost hobby and open source components ensures considerable decrease of UAV price, though in some cases compromising its reliability. In Space Science and Technology Institute (SSTI) in collaboration with Vilnius Gediminas Technical University (VGTU) researches have been performed in field of constructing and implementation of small UAVs composed of low cost open source components (and own developments). Most obvious and simple implementation of such UAVs - orthophoto imaging with data download and processing after the flight. The construction, implementation of UAVs, flight experience, data processing and data implementation will be further covered in the paper and presentation.

Low Birth Weight And Maternal Risk Factors

Directory of Open Access Journals (Sweden)

Secma Nigam

2003-06-01

Full Text Available Objectives : To study tile socio-economic and maternal risk factors associated with low birth weight babies and to measure the strength of association. Study Design : Hospital based case-control study. Setting : Shri Sayajirao General Hospital, Vadodara. Sample size : 312 cases and 312 controls. Participants : Cases Mothers who delivered single, live baby less than 2500 gms i.e. low birth weight. Controls:- Mothers who delivered single live baby more than 2500 gms. Study Variable : Maternal age, literacy, anaemia, outcome of last pregnancy. Statistical Analysis : Chi-square test and odd’s ratio. Result : Among cases, 14.5% mothers had age less titan 20 yrs as compared to 7.3% mothers in control group. 68.6% mothers amongst cases were illiterate against 46.5% mothers in control group. 53.8% mothers had haemoglobin level 10gm% or less amongst cases and no statistically significant difference was found between low birth weight and outcome of last pregnancy Conclusion : The maternal risk factors associated with low birth weight in mothers attending S.S.G. hospital age maternal anaemia (OR 2.66, illiteracy (OR 2.51, maternal age less than 20 yrs. (OR 2.OS. No association was found between low birth rate and outcome of last pregnancy

Low-cost high-quality crystalline germanium based flexible devices

KAUST Repository

Nassar, Joanna M.

2014-06-16

High performance flexible electronics promise innovative future technology for various interactive applications for the pursuit of low-cost, light-weight, and multi-functional devices. Thus, here we show a complementary metal oxide semiconductor (CMOS) compatible fabrication of flexible metal-oxide-semiconductor capacitors (MOSCAPs) with high-κ/metal gate stack, using a physical vapor deposition (PVD) cost-effective technique to obtain a high-quality Ge channel. We report outstanding bending radius ~1.25 mm and semi-transparency of 30%.

Low-cost high-quality crystalline germanium based flexible devices

KAUST Repository

Nassar, Joanna M.; Hussain, Aftab M.; Rojas, Jhonathan Prieto; Hussain, Muhammad Mustafa

2014-01-01

High performance flexible electronics promise innovative future technology for various interactive applications for the pursuit of low-cost, light-weight, and multi-functional devices. Thus, here we show a complementary metal oxide semiconductor (CMOS) compatible fabrication of flexible metal-oxide-semiconductor capacitors (MOSCAPs) with high-κ/metal gate stack, using a physical vapor deposition (PVD) cost-effective technique to obtain a high-quality Ge channel. We report outstanding bending radius ~1.25 mm and semi-transparency of 30%.

Low-cost, highly transparent flexible low-e coating film to enable electrochromic windows with increased energy savings

Energy Technology Data Exchange (ETDEWEB)

Berland, Brian [ITN Energy Systems, Inc., Littleton, CO (United States); Hollingsworth, Russell [ITN Energy Systems, Inc., Littleton, CO (United States)

2015-03-31

Five Quads of energy are lost through windows annually in the U.S. Low-e coatings are increasingly employed to reduce the wasted energy. Most commonly, the low-e coating is an oxide material applied directly to the glass at high temperature. With over 100,000,000 existing homes, a retrofit product is crucial to achieve widespread energy savings. Low-e films, i.e. coatings on polymeric substrates, are now also available to meet this need. However, the traditional oxide materials and process is incompatible with low temperature plastics. Alternate high performing low-e films typically incorporate materials that limit visible transmission to 35% or less. Further, the cost is high. The objective of this award was to develop a retrofit, integrated low-e/electrochromic window film to dramatically reduce energy lost through windows. While field testing of state-of-the-art electrochromic (EC) windows show the energy savings are maximized if a low-e coating is used in conjunction with the EC, available low-e films have a low visible transmission (~70% or less) that limits the achievable clear state and therefore, appearance and energy savings potential. Comprehensive energy savings models were completed at Lawrence Berkeley National Lab (LBNL). A parametric approach was used to project energy usage for windows with a large range of low-e properties across all U.S. climate zones, without limiting the study to materials that had already been produced commercially or made in a lab. The model enables projection of energy savings for low-e films as well as integrated low-e/EC products. This project developed a novel low-e film, optimized for compatibility with EC windows, using low temperature, high deposition rate processes for the growth of low-e coatings on plastic films by microwave plasma enhanced chemical vapor deposition. Silica films with good density and optical properties were demonstrated at deposition rates as high as 130Å/sec. A simple bi-layer low-e stack of

Low Cost/Low Noise Variable Pitch Ducted Fan, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — ACI proposes a design for a Propulsor (Low Cost/Low Noise Variable Pitch Ducted Fan) that has wide application in all sectors of Aviation. Propulsor hardware of this...

[Perinatal health: low birth weight and social class].

Science.gov (United States)

da Silva, A A; Barbieri, M A; Bettiol, H; Dal Bó, C M; Mucillo, G; Gomes, U A

1991-04-01

A survey was carried out in Ribeirão Preto, S. Paulo State, Brazil, between June 1978 and May 1979 with a view to studying the prevalence of low birth weight and its occurrence among different social classes. Data were collected from 8,878 singleton live births in eight maternity hospitals, accounting for 98% of all births in the area. Social classes were determinated by the use of a model proposed by Singer and modified for epidemiological purposes by Barros. Out of the 8,878 births, 660 (7.5%) were of low birth weight. The prevalence of deficient weight at birth (between 2,500 and 2,999 grams) was of 21.1%. Analysis indicated that 50.6% of children with low birth weight were at term and the majority of them suffered form intrauterine growth retardation. The prevalence of low birth weight according to social class was seen to be lower in the bourgeoisie classes (ranging from 2.8% to 3.9%) and higher in working classes (from 7% up to 9.5%). Low birth weight (defined as less than or equal to 2,500 grams) was used for purposes of comparison with other previous surveys. The percentage was lower in this study (8.3%) than that found in the Interamerican Investigation of Mortality in Childhood (8.7%), carried out in 1968-70. No statistically significant differences in the percentage of low birth weight were found in the case of Ribeirão Preto when these two surveys were compared.

Three-year weight change in successful weight losers who lost weight on a low-carbohydrate diet.

Science.gov (United States)

Phelan, Suzanne; Wyatt, Holly; Nassery, Shirine; Dibello, Julia; Fava, Joseph L; Hill, James O; Wing, Rena R

2007-10-01

The purpose of this study was to evaluate long-term weight loss and eating and exercise behaviors of successful weight losers who lost weight using a low-carbohydrate diet. This study examined 3-year changes in weight, diet, and physical activity in 891 subjects (96 low-carbohydrate dieters and 795 others) who enrolled in the National Weight Control Registry between 1998 and 2001 and reported >or=30-lb weight loss and >or=1 year weight loss maintenance. Only 10.8% of participants reported losing weight after a low-carbohydrate diet. At entry into the study, low-carbohydrate diet users reported consuming more kcal/d (mean +/- SD, 1,895 +/- 452 vs. 1,398 +/- 574); fewer calories in weekly physical activity (1,595 +/- 2,499 vs. 2,542 +/- 2,301); more calories from fat (64.0 +/- 7.9% vs. 30.9 +/- 13.1%), saturated fat (23.8 +/- 4.1 vs. 10.5 +/- 5.2), monounsaturated fat (24.4 +/- 3.7 vs. 11.0 +/- 5.1), and polyunsaturated fat (8.6 +/- 2.7 vs. 5.5 +/- 2.9); and less dietary restraint (10.8 +/- 2.9 vs. 14.9 +/- 3.9) compared with other Registry members. These differences persisted over time. No differences in 3-year weight regain were observed between low-carbohydrate dieters and other Registry members in intent-to-treat analyses (7.0 +/- 7.1 vs. 5.7 +/- 8.7 kg). It is possible to achieve and maintain long-term weight loss using a low-carbohydrate diet. The long-term health effects of weight loss associated with a high-fat diet and low activity level merits further investigation.

Weight loss with a low-carbohydrate, Mediterranean, or low-fat diet.

Science.gov (United States)

Shai, Iris; Schwarzfuchs, Dan; Henkin, Yaakov; Shahar, Danit R; Witkow, Shula; Greenberg, Ilana; Golan, Rachel; Fraser, Drora; Bolotin, Arkady; Vardi, Hilel; Tangi-Rozental, Osnat; Zuk-Ramot, Rachel; Sarusi, Benjamin; Brickner, Dov; Schwartz, Ziva; Sheiner, Einat; Marko, Rachel; Katorza, Esther; Thiery, Joachim; Fiedler, Georg Martin; Blüher, Matthias; Stumvoll, Michael; Stampfer, Meir J

2008-07-17

Trials comparing the effectiveness and safety of weight-loss diets are frequently limited by short follow-up times and high dropout rates. In this 2-year trial, we randomly assigned 322 moderately obese subjects (mean age, 52 years; mean body-mass index [the weight in kilograms divided by the square of the height in meters], 31; male sex, 86%) to one of three diets: low-fat, restricted-calorie; Mediterranean, restricted-calorie; or low-carbohydrate, non-restricted-calorie. The rate of adherence to a study diet was 95.4% at 1 year and 84.6% at 2 years. The Mediterranean-diet group consumed the largest amounts of dietary fiber and had the highest ratio of monounsaturated to saturated fat (Pcarbohydrate group consumed the smallest amount of carbohydrates and the largest amounts of fat, protein, and cholesterol and had the highest percentage of participants with detectable urinary ketones (Ploss was 2.9 kg for the low-fat group, 4.4 kg for the Mediterranean-diet group, and 4.7 kg for the low-carbohydrate group (Plosses were 3.3 kg, 4.6 kg, and 5.5 kg, respectively. The relative reduction in the ratio of total cholesterol to high-density lipoprotein cholesterol was 20% in the low-carbohydrate group and 12% in the low-fat group (P=0.01). Among the 36 subjects with diabetes, changes in fasting plasma glucose and insulin levels were more favorable among those assigned to the Mediterranean diet than among those assigned to the low-fat diet (Pcarbohydrate diets may be effective alternatives to low-fat diets. The more favorable effects on lipids (with the low-carbohydrate diet) and on glycemic control (with the Mediterranean diet) suggest that personal preferences and metabolic considerations might inform individualized tailoring of dietary interventions. (ClinicalTrials.gov number, NCT00160108.) 2008 Massachusetts Medical Society

A low-cost, modular, microwave-linked, color TV inspection system

International Nuclear Information System (INIS)

Panda, N.C.

1991-01-01

This paper reports that many custom-built radiation-shielded CCTV inspection systems for nuclear facilities are available in the market. This author, however, could find no reference to units using low-cost nodular technology for wireless transmission and control of color CCTV signals in radiation environments. The system that was developed is a process control observation tool geared toward identifying locations ad volumes of accumulated in-cell solids. It also performs remote integrity assessments of tanks and pipe routings that are required by regulatory agencies. System highlights are: microwave transmission of video and control signals, low cost, low maintenance, and modular design. Use of standard components enables easy exchange of modules. Microwave transmission resolved the complications of a wired system while increasing reliability and safety. The video image is created by the remote in-cell color TV camera and transmitted by microwave out of the cell to TV monitors at consoles in non-radiation zones

Low Cost Rapid Response Spacecraft, (LCRRS): A Research Project in Low Cost Spacecraft Design and Fabrication in a Rapid Prototyping Environment

Science.gov (United States)

Spremo, Stevan; Bregman, Jesse; Dallara, Christopher D.; Ghassemieh, Shakib M.; Hanratty, James; Jackson, Evan; Kitts, Christopher; Klupar, Pete; Lindsay, Michael; Ignacio, Mas;

Low birth weight in relation to maternal age and multiple ...

African Journals Online (AJOL)

Vihar

Objectives: To determine the relationship between Low Birth Weight (LBW), maternal age and multiple ... mothers. Low socio-economic status is the underlying ... rate of low birth weight infants. ... Table 3: Distribution of Age against Birth weight.

Engineering high reliability, low-jitter Marx generators

International Nuclear Information System (INIS)

Schneider, L.X.; Lockwood, G.J.

1985-01-01

Multimodule pulsed power accelerators typically require high module reliability and nanosecond regime simultaneity between modules. Energy storage using bipolar Marx generators can meet these requirements. Experience gained from computer simulations and the development of the DEMON II Marx generator has led to a fundamental understanding of the operation of these multistage devices. As a result of this research, significant improvements in erection time jitter and reliability have been realized in multistage, bipolar Marx generators. Erection time jitter has been measured as low as 2.5 nanoseconds for the 3.2MV, 16-stage PBFA I Marx and 3.5 nanoseconds for the 6.0MV, 30-stage PBFA II (DEMON II) Marx, while maintaining exceptionally low prefire rates. Performance data are presented from the DEMON II Marx research program, as well as discussions on the use of computer simulations in designing low-jitter Marx generators

Low birth weight,very low birth weight rates and gestational age-specific birth weight distribution of korean newborn infants.

Science.gov (United States)

Shin, Son-Moon; Chang, Young-Pyo; Lee, Eun-Sil; Lee, Young-Ah; Son, Dong-Woo; Kim, Min-Hee; Choi, Young-Ryoon

2005-04-01

To obtain the low birth weight (LBW) rate, the very low birth weight (VLBW) rate, and gestational age (GA)-specific birth weight distribution based on a large population in Korea, we collected and analyzed the birth data of 108,486 live births with GA greater than 23 weeks for 1 yr from 1 January to 31 December 2001, from 75 hospitals and clinics located in Korea. These data included birth weight, GA, gender of the infants, delivery type, maternal age, and the presence of multiple pregnancy. The mean birth weight and GA of a crude population are 3,188 +/-518 g and 38.7+/-2.1 weeks, respectively. The LBW and the VLBW rates are 7.2% and 1.4%, respectively. The preterm birth rate (less than 37 completed weeks of gestation) is 8.4% and the very preterm birth rate (less than 32 completed weeks of gestation) is 0.7%. The mean birth weights for female infants, multiple births, and births delivered by cesarean section were lower than those for male, singletons, and births delivered vaginally. The risk of delivering LBW or VLBW infant was higher for the teenagers and the older women (aged 35 yr and more). We have also obtained the percentile distribution of GA-specific birth weight in infants over 23 weeks of gestation.

Increasing low birth weight rates: deliveries in a tertiary hospital in istanbul.

Science.gov (United States)

Akin, Yasemin; Cömert, Serdar; Turan, Cem; Unal, Orhan; Piçak, Abdülkadir; Ger, Lale; Telatar, Berrin

2010-09-01

Prevalence of low birth weight deliveries may vary across different environments. The necessity of determination of regional data prompted this study. Information of all deliveries from January 2004 to December 2008 was obtained from delivery registry records retrospectively. Initial data including birth weight, vital status, sex, maternal age and mode of delivery were recorded using medical files. The frequency of low birth weight, very low birth weight, extremely low birth weight and stillbirth deliveries were determined. Among 19,533 total births, there were 450 (23.04 per 1000) stillbirths. Low birth weight rate was 10.61%. A significant increase in yearly distribution of low birth weight deliveries was observed (Pbirth weight and extremely low birth weight delivery rates were 3.14% and 1.58% respectively. Among 2073 low birth weight infants, 333 (16.06%) were stillbirths. The stillbirth delivery rate and the birth of a female infant among low birth weight deliveries were significantly higher than infants with birth weight ≥2500g (Pbirth weight and maternal age. The rate of cesarean section among low birth weight infants was 49.4%. High low birth weight and stillbirth rates, as well as the increase in low birth weight deliveries over the past five years in this study are striking. For reduction of increased low birth weight rates, appropriate intervention methods should be initiated.

Low-cost carriers fare competition effect

NARCIS (Netherlands)

Carmona Benitez, R.B.; Lodewijks, G.

2010-01-01

This paper examines the effects that low-cost carriers (LCC’s) produce when entering new routes operated only by full-service carriers (FSC’s) and routes operated by low-cost carriers in competition with full-service carriers. A mathematical model has been developed to determine what routes should

A Multi-Disciplinary Approach to Remote Sensing through Low-Cost UAVs.

Science.gov (United States)

Calvario, Gabriela; Sierra, Basilio; Alarcón, Teresa E; Hernandez, Carmen; Dalmau, Oscar

2017-06-16

The use of Unmanned Aerial Vehicles (UAVs) based on remote sensing has generated low cost monitoring, since the data can be acquired quickly and easily. This paper reports the experience related to agave crop analysis with a low cost UAV. The data were processed by traditional photogrammetric flow and data extraction techniques were applied to extract new layers and separate the agave plants from weeds and other elements of the environment. Our proposal combines elements of photogrammetry, computer vision, data mining, geomatics and computer science. This fusion leads to very interesting results in agave control. This paper aims to demonstrate the potential of UAV monitoring in agave crops and the importance of information processing with reliable data flow.

Birth weight recovery among very low birth weight infants surviving ...

African Journals Online (AJOL)

Very low birth weight (VLBW) infants are those born weighing less ... an association between retinopathy of prematurity and poor weight gain. .... LGA = large for gestational age; SGA = small for gestational age; NEC = necrotising enterocolitis;.

Strategies to fight low-cost rivals.

Science.gov (United States)

Kumar, Nirmalya

2006-12-01

Companies find it challenging and yet strangely reassuring to take on opponents whose strategies, strengths, and weaknesses resemble their own. Their obsession with familiar rivals, however, has blinded them to threats from disruptive, low-cost competitors. Successful price warriors, such as the German retailer Aldi, are changing the nature of competition by employing several tactics: focusing on just one or a few consumer segments, delivering the basic product or providing one benefit better than rivals do, and backing low prices with superefficient operations. Ignoring cutprice rivals is a mistake because they eventually force companies to vacate entire market segments. Price wars are not the answer, either: Slashing prices usually lowers profits for incumbents without driving the low-cost entrants out of business. Companies take various approaches to competing against cut-price players. Some differentiate their products--a strategy that works only in certain circumstances. Others launch low-cost businesses of their own, as many airlines did in the 1990s--a so-called dual strategy that succeeds only if companies can generate synergies between the existing businesses and the new ventures, as the financial service providers HSBC and ING did. Without synergies, corporations are better off trying to transform themselves into low-cost players, a difficult feat that Ryanair accomplished in the 1990s, or into solution providers. There will always be room for both low-cost and value-added players. How much room each will have depends not only on the industry and customers' preferences, but also on the strategies traditional businesses deploy.

Low-fat versus low-carbohydrate weight reduction diets: effects on weight loss, insulin resistance, and cardiovascular risk: a randomized control trial.

Science.gov (United States)

Bradley, Una; Spence, Michelle; Courtney, C Hamish; McKinley, Michelle C; Ennis, Cieran N; McCance, David R; McEneny, Jane; Bell, Patrick M; Young, Ian S; Hunter, Steven J

2009-12-01

Low-fat hypocaloric diets reduce insulin resistance and prevent type 2 diabetes in those at risk. Low-carbohydrate, high-fat diets are advocated as an alternative, but reciprocal increases in dietary fat may have detrimental effects on insulin resistance and offset the benefits of weight reduction. We investigated a low-fat (20% fat, 60% carbohydrate) versus a low-carbohydrate (60% fat, 20% carbohydrate) weight reduction diet in 24 overweight/obese subjects ([mean +/- SD] BMI 33.6 +/- 3.7 kg/m(2), aged 39 +/- 10 years) in an 8-week randomized controlled trial. All food was weighed and distributed, and intake was calculated to produce a 500 kcal/day energy deficit. Insulin action was assessed by the euglycemic clamp and insulin secretion by meal tolerance test. Body composition, adipokine levels, and vascular compliance by pulse-wave analysis were also measured. Significant weight loss occurred in both groups (P loss with no difference between groups (P = 0.71). The change in overall systemic arterial stiffness was, however, significantly different between diets (P = 0.04); this reflected a significant decrease in augmentation index following the low-fat diet, compared with a nonsignificant increase within the low-carbohydrate group. This study demonstrates comparable effects on insulin resistance of low-fat and low-carbohydrate diets independent of macronutrient content. The difference in augmentation index may imply a negative effect of low-carbohydrate diets on vascular risk.

Adherence to low-carbohydrate and low-fat diets in relation to weight loss and cardiovascular risk factors.

Science.gov (United States)

Hu, Tian; Yao, Lu; Reynolds, Kristi; Niu, Tianhua; Li, Shengxu; Whelton, Paul K; He, Jiang; Steffen, Lyn M; Bazzano, Lydia A

2016-03-01

A low-carbohydrate diet can reduce body weight and some cardiovascular disease (CVD) risk factors more than a low-fat diet, but differential adherence may play a role in these effects. Data were used from 148 adults who participated in a 12-month clinical trial examining the effect of a low-carbohydrate diet (fat diet (fat, fat) on weight and CVD risk factors. We compared attendance at counseling sessions, deviation from nutrient goals, urinary ketone presence, and composite scores representing the overall adherence based on the distribution of these individual indicators between two interventions. Composite scores were similar between the two groups. A one-interquartile-range increase in composite score representing better adherence to a low-carbohydrate diet was associated with 2.2 kg or 2.3 % greater weight loss, 1.1 greater reduction in percent fat mass, and 1.3 greater increase in proportion of lean mass. Indicators of adherence to a low-fat diet was not associated with changes in weight, fat mass or lean mass. Despite comparable adherence between groups, a low-carbohydrate diet was associated with greater reductions in body weight and improvement in body composition, while a low-fat diet was not associated with weight loss.

Low-Cost Spectral Sensor Development Description.

Energy Technology Data Exchange (ETDEWEB)

Armijo, Kenneth Miguel; Yellowhair, Julius

2014-11-01

Solar spectral data for all parts of the US is limited due in part to the high cost of commercial spectrometers. Solar spectral information is necessary for accurate photovoltaic (PV) performance forecasting, especially for large utility-scale PV installations. A low-cost solar spectral sensor would address the obstacles and needs. In this report, a novel low-cost, discrete- band sensor device, comprised of five narrow-band sensors, is described. The hardware is comprised of commercial-off-the-shelf components to keep the cost low. Data processing algorithms were developed and are being refined for robustness. PV module short-circuit current ( I sc ) prediction methods were developed based on interaction-terms regression methodology and spectrum reconstruction methodology for computing I sc . The results suggest the computed spectrum using the reconstruction method agreed well with the measured spectrum from the wide-band spectrometer (RMS error of 38.2 W/m 2 -nm). Further analysis of computed I sc found a close correspondence of 0.05 A RMS error. The goal is for ubiquitous adoption of the low-cost spectral sensor in solar PV and other applications such as weather forecasting.

High reliability low jitter 80 kV pulse generator

International Nuclear Information System (INIS)

Savage, Mark Edward; Stoltzfus, Brian Scott

2009-01-01

Switching can be considered to be the essence of pulsed power. Time accurate switch/trigger systems with low inductance are useful in many applications. This article describes a unique switch geometry coupled with a low-inductance capacitive energy store. The system provides a fast-rising high voltage pulse into a low impedance load. It can be challenging to generate high voltage (more than 50 kilovolts) into impedances less than 10 (Omega), from a low voltage control signal with a fast rise time and high temporal accuracy. The required power amplification is large, and is usually accomplished with multiple stages. The multiple stages can adversely affect the temporal accuracy and the reliability of the system. In the present application, a highly reliable and low jitter trigger generator was required for the Z pulsed-power facility [M. E. Savage, L. F. Bennett, D. E. Bliss, W. T. Clark, R. S. Coats,J. M. Elizondo, K. R. LeChien, H. C. Harjes, J. M. Lehr, J. E. Maenchen, D. H. McDaniel, M. F. Pasik, T. D. Pointon, A. C. Owen, D. B. Seidel, D. L. Smith, B. S. Stoltzfus, K.W. Struve, W.A. Stygar, L.K. Warne, and J. R. Woodworth, 2007 IEEE Pulsed Power Conference, Albuquerque, NM (IEEE, Piscataway, NJ, 2007), p. 979]. The large investment in each Z experiment demands low prefire probability and low jitter simultaneously. The system described here is based on a 100 kV DC-charged high-pressure spark gap, triggered with an ultraviolet laser. The system uses a single optical path for simultaneously triggering two parallel switches, allowing lower inductance and electrode erosion with a simple optical system. Performance of the system includes 6 ns output rise time into 5.6 (Omega), 550 ps one-sigma jitter measured from the 5 V trigger to the high voltage output, and misfire probability less than 10 -4 . The design of the system and some key measurements will be shown in the paper. We will discuss the design goals related to high reliability and low jitter. While

Investigation of Galactosylated Low Molecular Weight Chitosan ...

African Journals Online (AJOL)

was coupled with low molecular weight chitosan (LMWC) using carbodiimide chemistry. .... High molecular weight chitosan (minimum 85% ..... membrane permeability of drug and mutual repulsion ... coating thickness and the lower solubility of.

Efficiency-optimized low-cost TDPAC spectrometer using a versatile routing/coincidence unit

International Nuclear Information System (INIS)

Renteria, M.; Bibiloni, A. G.; Darriba, G. N.; Errico, L. A.; Munoz, E. L.; Richard, D.; Runco, J.

2008-01-01

A highly efficient, reliable, and low-cost γ-γ TDPAC spectrometer, PACAr, optimized for 181 Hf-implanted low-activity samples, is presented. A versatile EPROM-based routing/coincidence unit was developed and implemented to be use with the memory-card-based multichannel analyzer hosted in a personal computer. The excellent energy resolution and very good overall resolution and efficiency of PACAr are analyzed and compare with advanced and already tested fast-fast and slow-fast PAC spectrometers.

Efficiency-optimized low-cost TDPAC spectrometer using a versatile routing/coincidence unit

Energy Technology Data Exchange (ETDEWEB)

Renteria, M., E-mail: renteria@fisica.unlp.edu.ar; Bibiloni, A. G.; Darriba, G. N.; Errico, L. A.; Munoz, E. L.; Richard, D.; Runco, J. [Universidad Nacional de La Plata, Departamento de Fisica, Facultad de Ciencias Exactas (Argentina)

2008-01-15

A highly efficient, reliable, and low-cost {gamma}-{gamma} TDPAC spectrometer, PACAr, optimized for {sup 181}Hf-implanted low-activity samples, is presented. A versatile EPROM-based routing/coincidence unit was developed and implemented to be use with the memory-card-based multichannel analyzer hosted in a personal computer. The excellent energy resolution and very good overall resolution and efficiency of PACAr are analyzed and compare with advanced and already tested fast-fast and slow-fast PAC spectrometers.

Low cost balancing unit design

Science.gov (United States)

Golembiovsky, Matej; Dedek, Jan; Slanina, Zdenek

2017-06-01

This article deals with the design of a low-cost balancing system which consist of battery balancing units, accumulator pack units and coordinator unit with interface for higher level of battery management system. This solution allows decentralized mode of operation and the aim of this work is implementation of controlling and diagnostic mechanism into an electric scooter project realized at Technical university of Ostrava. In todays world which now fully enjoys the prime of electromobility, off-grid battery systems and other, it is important to seek the optimal balance between functionality and the economy side of BMS that being electronics which deals with secondary cells of batery packs. There were numerous sophisticated, but not too practical BMS models in the past, such as centralized system or standalone balance modules of individual cells. This article aims at development of standalone balance modules which are able to communicate with the coordinator, adjust their parameters and ensure their cells safety in case of a communication failure. With the current worldwide cutting cost trend in mind, the emphasis was put on the lowest price possible for individual component. The article is divided into two major categories, the first one being desing of power electronics with emphasis on quality, safety (cooling) and also cost. The second part describes development of a communication interface with reliability and cost in mind. The article contains numerous graphs from practical measurements. The outcome of the work and its possible future is defined in the conclusion.

Survival of extremely low-birth-weight infants

African Journals Online (AJOL)

Survival of extremely low-birth-weight (ELBW) infants in a resource-limited public hospital setting is still low in South. Africa. is study aimed ... Mortality as a result of prematurity is the major contributor to .... reported from a large cohort study that.

Low Cost Benefit Suggestions.

Science.gov (United States)

Doyel, Hoyt W.; McMillan, John D.

1980-01-01

Outlines eight low-cost employee benefits and summarizes their relative advantages. The eight include a stock ownership program, a sick leave pool, flexible working hours, production incentives, and group purchase plans. (IRT)

Validation of a low-cost EEG device for mood induction studies.

Science.gov (United States)

Rodríguez, Alejandro; Rey, Beatriz; Alcañiz, Mariano

2013-01-01

New electroencephalography (EEG) devices, more portable and cheaper, are appearing on the market. Studying the reliability of these EEG devices for emotional studies would be interesting, as these devices could be more economical and compatible with Virtual Reality (VR) settings. Therefore, the aim in this work was to validate a low-cost EEG device (Emotiv Epoc) to monitor brain activity during a positive emotional induction procedure. Emotional pictures (IAPS) were used to induce a positive mood in sixteen participants. Changes in the brain activity of subjects were compared between positive induction and neutral conditions. Obtained results were in accordance with previous scientific literature regarding frontal EEG asymmetry, which supports the possibility of using this low-cost EEG device in future mood induction studies combined with VR.

Young adults with very low birth weight: leaving the parental home and sexual relationships--Helsinki Study of Very Low Birth Weight Adults.

Science.gov (United States)

Kajantie, Eero; Hovi, Petteri; Räikkönen, Katri; Pesonen, Anu-Katriina; Heinonen, Kati; Järvenpää, Anna-Liisa; Eriksson, Johan G; Strang-Karlsson, Sonja; Andersson, Sture

2008-07-01

Although most children and adults who are born very preterm live healthy lives, they have, on average, lower cognitive scores, more internalizing behaviors, and deficits in social skills. This could well affect their transition to adulthood. We studied the tempo of first leaving the parental home and starting cohabitation with an intimate partner and sexual experience of young adults with very low birth weight (Adults, 162 very low birth weight individuals and 188 individuals who were born at term (mean age: 22.3 years [range: 18.5-27.1]) and did not have any major disability filled out a questionnaire. For analysis of their ages at events which had not occurred in all subjects, we used survival analysis (Cox regression), adjusted for gender, current height, parents' ages at the birth, maternal smoking during pregnancy, parental educational attainment, number of siblings, and parental divorce/death. During their late teens and early adulthood, these very low birth weight adults were less likely to leave the parental home and to start cohabiting with an intimate partner. In gender-stratified analyses, these hazard ratios were similar between genders, but the latter was statistically significant for women only. These very low birth weight adults were also less likely to experience sexual intercourse. This relationship was statistically significant for women but not for men; however, very low birth weight women and men both reported a smaller lifetime number of sex partners than did control subjects. Healthy young adults with very low birth weight show a delay in leaving the parental home and starting sexual activity and partnerships.

Construction and calibration of a low cost and fully automated vibrating sample magnetometer

International Nuclear Information System (INIS)

El-Alaily, T.M.; El-Nimr, M.K.; Saafan, S.A.; Kamel, M.M.; Meaz, T.M.; Assar, S.T.

2015-01-01

A low cost vibrating sample magnetometer (VSM) has been constructed by using an electromagnet and an audio loud speaker; where both are controlled by a data acquisition device. The constructed VSM records the magnetic hysteresis loop up to 8.3 KG at room temperature. The apparatus has been calibrated and tested by using magnetic hysteresis data of some ferrite samples measured by two scientifically calibrated magnetometers; model (Lake Shore 7410) and model (LDJ Electronics Inc. Troy, MI). Our VSM lab-built new design proved success and reliability. - Highlights: • A low cost automated vibrating sample magnetometer VSM has been constructed. • The VSM records the magnetic hysteresis loop up to 8.3 KG at room temperature. • The VSM has been calibrated and tested by using some measured ferrite samples. • Our VSM lab-built new design proved success and reliability

Construction and calibration of a low cost and fully automated vibrating sample magnetometer

Energy Technology Data Exchange (ETDEWEB)

El-Alaily, T.M., E-mail: toson_alaily@yahoo.com [Physics Department, Faculty of Science, Tanta University, Tanta (Egypt); El-Nimr, M.K.; Saafan, S.A.; Kamel, M.M.; Meaz, T.M. [Physics Department, Faculty of Science, Tanta University, Tanta (Egypt); Assar, S.T. [Engineering Physics and Mathematics Department, Faculty of Engineering, Tanta University, Tanta (Egypt)

2015-07-15

A low cost vibrating sample magnetometer (VSM) has been constructed by using an electromagnet and an audio loud speaker; where both are controlled by a data acquisition device. The constructed VSM records the magnetic hysteresis loop up to 8.3 KG at room temperature. The apparatus has been calibrated and tested by using magnetic hysteresis data of some ferrite samples measured by two scientifically calibrated magnetometers; model (Lake Shore 7410) and model (LDJ Electronics Inc. Troy, MI). Our VSM lab-built new design proved success and reliability. - Highlights: • A low cost automated vibrating sample magnetometer VSM has been constructed. • The VSM records the magnetic hysteresis loop up to 8.3 KG at room temperature. • The VSM has been calibrated and tested by using some measured ferrite samples. • Our VSM lab-built new design proved success and reliability.

low-cost apparatus from locally available materials for teaching

African Journals Online (AJOL)

unesco

twofold: i) to design and produce appropriate low cost apparatus from locally .... How are the low-cost and manufactured apparatus compared in terms of cost and efficiency? ... BASIC TOOLS FOR THE LOW COST APPARATUS PRODUCTION.

Low cost realization of space-borne synthectic aperture radar - MicroSAR

Science.gov (United States)

Carter, D.; Hall, C.

Spaceborne Earth Observation data has been used for decades in the areas of meteorology and optical imaging. The systems and satellites have, in the main, been owned and operated by a few government institutions and agencies. More recently industrial organizations in North America have joined the list. Few of these, however, include Synthetic Aperture Radar (SAR)., although the additional utility in terms of all weather, 24 hour measurement capability over the Earth's surface is well recognized. Three major factors explain this:1) Relationships between the SAR measurements of radar backscatter and images to the specific information needs have not been seen as sufficiently well understood or robust2) Availability of suitable sources, at the relevant performance and data quality have been inadequate to provide service assurance that is necessary to sustain commercial businesses3) Costs associated with building, launching and operating spaceborne SAR have not been low enough as to achieve an acceptable return of investment. A significant amount of research and development has been undertaken throughout the World to establish reliable and robust algorithms for information extraction from SAR data. Much of this work has been carried out utilizing airborne systems over localized and carefully controlled regions. In addition, an increasing number of pilot services have been offered by geo-information providers. This has allowed customer confidence to grow. With the status of spaceborne SAR being effectively in the development phase, commercial funding has been scarce, and there has been need to rely on government and institutional budgets. Today the increasing maturity of the technology of SAR and its applications is beginning to attract the commercial sector. This is the funding necessary to realize sufficient assets to be able to provide a robust supply of SAR data to the geo-information providers and subsequently a reliable service to customers. Reducing the costs

Low birth weight is not associated with thyroid autoimmunity

DEFF Research Database (Denmark)

Brix, Thomas Heiberg; Hansen, Pia Skov; Rudbeck, Annette Beck

2006-01-01

CONTEXT: Low birth weight has been proposed as a risk factor for the development of antibodies toward thyroid peroxidase (TPOAb) and thyroglobulin (TgAb) in adult life. However, the association could also be due to genetic or environmental factors affecting both birth weight and the development...... of thyroid autoantibodies. The effect of these confounders can be minimized through investigation of twin pairs. OBJECTIVE AND DESIGN: To examine the impact of low birth weight on the development of thyroid autoimmunity, we studied whether within-twin-cohort and within-twin-pair differences in birth weight......, gestational age, TSH, and smoking) did not change the findings of nonsignificant regression coefficients. CONCLUSION: Low birth weight per se has no evident role in the etiology of thyroid autoimmunity....

Low-cost evacuated-tube solar collector appendices. Final report

Energy Technology Data Exchange (ETDEWEB)

Beecher, D.T.

1980-05-31

A low cost solar heat energy collector module and array has been designed using the evacuated tube, selective absorber, air cooled concept. Glass tubing as used in fluorescent lamps with automatic sealing methods is a key feature of the evacuated tube design. A molded fiber glass concentrating reflector panel and sheet metal header assembly are proposed. Major design problems involved included the cost of materials and labor, thermal expansion and distortion problems, high stagnation and operating temperatures, isolation, thermal efficiency, sealing, joining, air pressure drop, and weight of the preassembled module. A cost of less than $5 per active square foot of collecting surface has been estimated for materials and labor of the module and its mounting frame.

Investigating DRG cost weights for hospitals in middle income countries.

Science.gov (United States)

Ghaffari, Shahram; Doran, Christopher; Wilson, Andrew; Aisbett, Chris; Jackson, Terri

2009-01-01

Identifying the cost of hospital outputs, particularly acute inpatients measured by Diagnosis Related Groups (DRGs), is an important component of casemix implementation. Measuring the relative costliness of specific DRGs is useful for a wide range of policy and planning applications. Estimating the relative use of resources per DRG can be done through different costing approaches depending on availability of information and time and budget. This study aims to guide costing efforts in Iran and other countries in the region that are pursuing casemix funding, through identifying the main issues facing cost finding approaches and introducing the costing models compatible with their hospitals accounting and management structures. The results show that inadequate financial and utilisation information at the patient's level, poorly computerized 'feeder systems'; and low quality data make it impossible to estimate reliable DRGs costs through clinical costing. A cost modelling approach estimates the average cost of 2.723 million Rials (Iranian Currency) per DRG. Using standard linear regression, a coefficient of 0.14 (CI = 0.12-0.16) suggests that the average cost weight increases by 14% for every one-day increase in average length of stay (LOS).We concluded that calculation of DRG cost weights (CWs) using Australian service weights provides a sensible starting place for DRG-based hospital management; but restructuring hospital accounting systems, designing computerized feeder systems, using appropriate software, and development of national service weights that reflect local practice patterns will enhance the accuracy of DRG CWs.

Effect of weight loss by a low-fat diet and a low-carbohydrate diet on peptide YY levels.

Science.gov (United States)

Essah, P A; Levy, J R; Sistrun, S N; Kelly, S M; Nestler, J E

2010-08-01

To compare the effects of weight loss by an energy-restricted low-fat diet vs low-carbohydrate diet on serum peptide YY (PYY) levels. 8-Week prospective study of 30 obese adults (mean age: 42.8+/-2.0 years, mean body mass index 35.5+/-0.6 kg m(-2)). After 8 weeks, subjects on the low-carbohydrate diet lost substantially more weight than those on the low-fat diet (5.8 vs 0.99 kg, Plow-fat or low-carbohydrate diet likely represents a compensatory response to maintain energy homeostasis and contributes to difficulty in weight loss during energy-restricted diets.

Sharing the science on human milk feedings with mothers of very-low-birth-weight infants.

Science.gov (United States)

Rodriguez, Nancy A; Miracle, Donna J; Meier, Paula P

2005-01-01

Mother's milk provides protection from serious and costly morbidity for very-low-birth-weight infants (nosocomial infection, and necrotizing enterocolitis. However, NICU and maternity nurses may be hesitant to encourage mothers to initiate lactation because of a reluctance to make mothers feel guilty or coerced. This article reviews the evidence for the health outcomes of mothers' milk feeding in very-low-birth-weight infants and provides examples of ways to share this science with mothers so that they can make an informed feeding decision.

Comparison of a low carbohydrate and low fat diet for weight maintenance in overweight or obese adults enrolled in a clinical weight management program

Directory of Open Access Journals (Sweden)

Curry Chelsea

2007-11-01

Full Text Available Abstract Background Recent evidence suggests that a low carbohydrate (LC diet may be equally or more effective for short-term weight loss than a traditional low fat (LF diet; however, less is known about how they compare for weight maintenance. The purpose of this study was to compare body weight (BW for participants in a clinical weight management program, consuming a LC or LF weight maintenance diet for 6 months following weight loss. Methods Fifty-five (29 low carbohydrate diet; 26 low fat diet overweight/obese middle-aged adults completed a 9 month weight management program that included instruction for behavior, physical activity (PA, and nutrition. For 3 months all participants consumed an identical liquid diet (2177 kJ/day followed by 1 month of re-feeding with solid foods either low in carbohydrate or low in fat. For the remaining 5 months, participants were prescribed a meal plan low in dietary carbohydrate (~20% or fat (~30%. BW and carbohydrate or fat grams were collected at each group meeting. Energy and macronutrient intake were assessed at baseline, 3, 6, and 9 months. Results The LC group increased BW from 89.2 ± 14.4 kg at 3 months to 89.3 ± 16.1 kg at 9 months (P = 0.84. The LF group decreased BW from 86.3 ± 12.0 kg at 3 months to 86.0 ± 14.0 kg at 9 months (P = 0.96. BW was not different between groups during weight maintenance (P = 0.87. Fifty-five percent (16/29 and 50% (13/26 of participants for the LC and LF groups, respectively, continued to decrease their body weight during weight maintenance. Conclusion Following a 3 month liquid diet, the LC and LF diet groups were equally effective for BW maintenance over 6 months; however, there was significant variation in weight change within each group.

Solar drying and organoleptic characteristics of two tropical African fish species using improved low-cost solar driers.

Science.gov (United States)

Mustapha, Moshood K; Ajibola, Taiye B; Salako, Abdulbashir F; Ademola, Sunmola K

2014-05-01

This study was done to evaluate the drying performance, efficiency, and effectiveness of five different types of improved low-cost solar driers in terms of moisture loss from two tropical African fish species Clarias gariepinus (African sharp tooth catfish) and Oreochromis niloticus (Nile tilapia) and testing the organoleptic characteristics of the dried samples. The driers used were made from plastic, aluminum, glass, glass with black igneous stone, and mosquito net, with traditional direct open-sun drying as a control. A significant (P < 0.05) decrease in weight resulting from moisture loss in the two fish species was observed in all the driers, with the highest reduction occurring in the glass drier containing black stone. The rate of weight loss was faster in the first 4 days of drying with black stone-inserted glass drier showing the fastest drying rate with a constant weight in C. gariepinus attained on the 11th day and in O. niloticus on the eighth day. The slowest drier was plastic where a constant weight of the species were recorded on and 13th day and 11th day, respectively. Volunteers were used to assess the organoleptic characteristics of the dried samples and they showed lowest acceptability for the open-sun drying, while samples from the glass drier containing black stone had the highest acceptability in terms of the taste, flavor, appearance, texture, odor, palatability, and shelf-life. The low-cost solar driers were effective found in removing water from the fish resulting in significant loss of weight and moisture. The highest drying time, efficient performance, drying effectiveness, and high acceptability of the organoleptic parameters of the dried products from the black stone-inserted glass drier were due to the ability of the glass and the black stone to retain, transmit, and radiate heat to the fish sample all the time (day and night). These low-cost driers are simple to construct, materials for its construction readily available, easy to

Palliative and low cost radiotherapy in developing countries

International Nuclear Information System (INIS)

Allen, Barry; Hussein, S.M.A.

2011-01-01

Full text: The International Agency for Research on Cancer predicts that cancer incidence in developing countries will increase dramatically in the first two decades of this millennium. Already some 80% of cancer patients in developing countries present with incurable disease. In many cases pain is a severe problem and palliation is needed to improve quality of life as well as extending survival. This paper will consider the physical and clinical aspects of palliative radiotherapy (PRT), choice of radiation modality, alternative approaches to imaging and therapy and cost-benefit considerations. The potential benefits of a dedicated palliative care centre include lower cost and therefore more centres, enabling more patients access to regional palliative care. Simple curative treatments could also be managed. Co60 radiotherapy has important advantages in developing countries, because of the higher initial cost of a linear accelerator, as well as the need for reliable power supply and the level of skill required by linac technicians and physicists. The beam characteristics of both Co60 units and low energy linacs are compared and both are found to be acceptable for palliation. The role of palliative and low cost radiotherapy in Bangladesh is reviewed. The concept of telemedicine is also discussed, using mobile phones and internet communication to allow rural clinics to receive support from specialists based in the cities, to send images for remote diagnosis and remote dose planning for radiotherapy.

The role of lifestyle in preventing low birth weight.

Science.gov (United States)

Chomitz, V R; Cheung, L W; Lieberman, E

1995-01-01

Lifestyle behaviors such as cigarette smoking, weight gain during pregnancy, and use of other drugs play an important role in determining fetal growth. The relationship between lifestyle risk factors and low birth weight is complex and is affected by psychosocial, economic, and biological factors. Cigarette smoking is the largest known risk factor for low birth weight. Approximately 20% of all low birth weight could be avoided if women did not smoke during pregnancy. Reducing heavy use of alcohol and other drugs during pregnancy could also reduce the rate of low birth weight births. Pregnancy and the prospect of pregnancy provide an important window of opportunity to improve women's health and the health of children. The adoption before or during pregnancy of more healthful lifestyle behaviors, such as ceasing to smoke, eating an adequate diet and gaining enough weight during pregnancy, and ceasing heavy drug use, can positively affect the long-term health of women and the health of their infants. Detrimental lifestyles can be modified, but successful modification will require large-scale societal changes. In the United States, these societal changes should include a focus on preventive health, family-centered workplace policies, and changes in social norms.

Plastic bags for prevention of hypothermia in preterm and low birth weight infants.

Science.gov (United States)

Leadford, Alicia E; Warren, Jamie B; Manasyan, Albert; Chomba, Elwyn; Salas, Ariel A; Schelonka, Robert; Carlo, Waldemar A

2013-07-01

Hypothermia contributes to neonatal mortality and morbidity, especially in preterm and low birth weight infants in developing countries. Plastic bags covering the trunk and extremities of very low birth weight infants reduces hypothermia. This technique has not been studied in larger infants or in many resource-limited settings. The objective was to determine if placing preterm and low birth weight infants inside a plastic bag at birth maintains normothermia. Infants at 26 to 36 weeks' gestational age and/or with a birth weight of 1000 to 2500 g born at the University Teaching Hospital in Lusaka, Zambia, were randomized by using a 1:1 allocation and parallel design to standard thermoregulation (blanket or radiant warmer) care or to standard thermoregulation care plus placement inside a plastic bag at birth. The primary outcome measure was axillary temperature in the World Health Organization-defined normal range (36.5-37.5°C) at 1 hour after birth. A total of 104 infants were randomized. At 1 hour after birth, infants randomized to plastic bag (n = 49) were more likely to have a temperature in the normal range as compared with infants in the standard thermoregulation care group (n = 55; 59.2% vs 32.7%; relative risk 1.81; 95% confidence interval 1.16-2.81; P = .007). The temperature at 1 hour after birth in the infants randomized to plastic bag was 36.5 ± 0.5°C compared with 36.1 ± 0.6°C in standard care infants (P 38.0°C) did not occur in any infant. Placement of preterm/low birth weight infants inside a plastic bag at birth compared with standard thermoregulation care reduced hypothermia without resulting in hyperthermia, and is a low-cost, low-technology tool for resource-limited settings.

Low cost sic coated erosion resistant graphite

International Nuclear Information System (INIS)

Zafar, M.F.; Nicholls, J.R.

2007-01-01

The development of materials with unique and improved properties using low cost processes is essential to increase performance and reduce cost of the solid rocket motors. Specifically advancements are needed for boost phase nozzle. As these motors operate at very high pressure and temperatures, the nozzle must survive high thermal stresses with minimal erosion to maintain performance. Currently three material choices are being exploited; which are refractory metals, graphite and carbon-carbon composites. Of these three materials graphite is the most attractive choice because of its low cost, light weight, and easy forming. However graphite is prone to erosion, both chemical and mechanical, which may affect the ballistic conditions and mechanical properties of the nozzle. To minimize this erosion high density graphite is usually preferred; which is again very expensive. Another technique used to minimize the erosion is Pyrolytic Graphite (PG) coating inside the nozzle. However PG coating is prone to cracking and spallation along with very cumbersome deposition process. Another possible methodology to avoid this erosion is to convert the inside surface of the rocket nozzle to Silicon Carbide (SiC), which is very erosion resistant and have much better thermal stability compared to graphite and even PG. Due to its functionally gradient nature such a layer will be very adherent and resistant to spallation. The current research is focused on synthesizing, characterizing and oxidation testing of such a converted SiC layer on commercial grade graphite. (author)

Hidden costs of low-cost screening mammography

International Nuclear Information System (INIS)

Cyrlak, D.

1987-01-01

Twenty-two hundred women in Orange County, California, took part in a low-cost mammography screening project sponsored by the American Cancer Society and the KCBS-TV. Patients were followed up by telephone and questioned about actual costs incurred as a result of screening mammography, including costs of repeated and follow-up mammograms, US examinations and surgical consultations. The total number of biopsies, cancers found, and the costs involved were investigated. The authors' results suggest that particularly in centers with a high positive call rate, the cost of screening mammograms accounts for only a small proportion of the medical costs

Low-cost sensors to monitor groundwater drought in Somalia

Science.gov (United States)

Buytaert, W.; Ochoa-Tocachi, B. F.; Caniglia, D.; Haibe, K.; Butler, A. P.

2017-12-01

Somalia is one of the poorest countries in the world, devastated by conflict and suffering from the most severe droughts in living memory. Over 6 million people are in need of assistance, and about 3 million are threatened with famine. In April 2017, the WHO estimated that more than 25,000 people have been struck by cholera or acute watery diarrhoea and this number is rising quickly. About half a million Somalis have been displaced internally, many of which in search of water. Some 3 million pastoralists have lost 70% of livestock as a result of the drought. Humanitarian organisations and government agencies invest large amounts of resources to alleviate these conditions. It is paramount to inform the design, focus, and optimisation of these interventions by monitoring and quantifying water resources. Yet, regions such as Somalia are extremely sparsely gauged as a result of a combination of lack of resources and technical expertise, as well as the harsh geographical and geopolitical conditions. Low-cost, robust, and reliable sensors may provide a potential solution to this problem. We present the results of a research project that aimed to leverage new developments in sensor, logger, and data transmission technologies to develop low-cost water level sensors to monitor hand-dug groundwater wells in real time. We tested 3 types of sensor types, i.e. pressure transducers, ultrasound-based distance sensors, and lidar, which were coupled to low-cost logging systems. The different designs were tested both in laboratory conditions, and in-situ in hand-dug wells in Somaliland. Our results show that it is technically possible to build sensors with a total cost of around US$250 each, which are fit-for-purpose for the required application. In-situ deployment over a period of 2 months highlights their robustness despite severe logistical and practical challenges, though further tests are required to understand their long-term reliability. Operating the sensors at one

Design of low-cost general purpose microcontroller based neuromuscular stimulator.

Science.gov (United States)

Koçer, S; Rahmi Canal, M; Güler, I

2000-04-01

In this study, a general purpose, low-cost, programmable, portable and high performance stimulator is designed and implemented. For this purpose, a microcontroller is used in the design of the stimulator. The duty cycle and amplitude of the designed system can be controlled using a keyboard. The performance test of the system has shown that the results are reliable. The overall system can be used as the neuromuscular stimulator under safe conditions.

Anticoagulant effect of low molecular weight heparin on central ...

African Journals Online (AJOL)

Purpose: To analyse the effect of low molecular weight heparin on venous catheters in haemodialysis patients. Methods: This study included 140 eligible patients who were randomly and evenly divided into two groups, viz, a study group that received low molecular weight heparin and a control group that received ...

Low Cost Integrated Navigation System for Unmanned Vessel

Directory of Open Access Journals (Sweden)

Yang Changsong

2017-11-01

Full Text Available Large errors of low-cost MEMS inertial measurement unit (MIMU lead to huge navigation errors, even wrong navigation information. An integrated navigation system for unmanned vessel is proposed. It consists of a low-cost MIMU and Doppler velocity sonar (DVS. This paper presents an integrated navigation method, to improve the performance of navigation system. The integrated navigation system is tested using simulation and semi-physical simulation experiments, whose results show that attitude, velocity and position accuracy has improved awfully, giving exactly accurate navigation results. By means of the combination of low-cost MIMU and DVS, the proposed system is able to overcome fast drift problems of the low cost IMU.

Estimating costs of care for meningitis infections in low- and middle-income countries.

Science.gov (United States)

Portnoy, Allison; Jit, Mark; Lauer, Jeremy; Blommaert, Adriaan; Ozawa, Sachiko; Stack, Meghan; Murray, Jillian; Hutubessy, Raymond

2015-05-07

Meningitis infections are often associated with high mortality and risk of sequelae. The costs of treatment and care for meningitis are a great burden on health care systems, particularly in resource-limited settings. The objective of this study is to review data on the costs of care for meningitis in low- and middle-income countries, as well as to show how results could be extrapolated to countries without sound data. We conducted a systematic review of the literature from six databases to identify studies examining the cost of care in low- and middle-income countries for all age groups with suspected, probable, or confirmed meningitis. We extracted data on treatment costs and sequelae by infectious agent and/or pathogen, where possible. Using multiple regression analysis, a relationship between hospital costs and associated determinants was investigated in order to predict costs in countries with missing data. This relationship was used to predict treatment costs for all 144 low- and middle-income countries. The methodology of conducting a systematic review, extrapolating, and setting up a standard database can be used as a tool to inform cost-effectiveness analyses in situations where cost of care data are poor. Both acute and long-term costs of meningitis could be extrapolated to countries without reliable data. Although only bacterial causes of meningitis can be vaccine-preventable, a better understanding of the treatment costs for meningitis is crucial for low- and middle-income countries to assess the cost-effectiveness of proposed interventions in their country. This cost information will be important as inputs in future cost-effectiveness studies, particularly for vaccines. Copyright © 2014 Elsevier Ltd. All rights reserved.

Design for Six Sigma: Approach for reliability and low-cost manufacturing.

Directory of Open Access Journals (Sweden)

Jesus Gerardo Cruz Alvarez

2012-07-01

Full Text Available The aim of this study is to discuss new product development based on a traditional stage-gate process and to examine how new product development [NPD] tools, such as lean design for Six Sigma, can accelerate the achievement of the main goals of NPD: reliable product quality, cost-effective implementation, and desired time-to-market. These new tools must be incorporated into a new approach to NPD based on the Advanced Product and Quality Planning methodology.

Low cost MATLAB-based pulse oximeter for deployment in research and development applications.

Science.gov (United States)

Shokouhian, M; Morling, R C S; Kale, I

2013-01-01

Problems such as motion artifact and effects of ambient lights have forced developers to design different signal processing techniques and algorithms to increase the reliability and accuracy of the conventional pulse oximeter device. To evaluate the robustness of these techniques, they are applied either to recorded data or are implemented on chip to be applied to real-time data. Recorded data is the most common method of evaluating however it is not as reliable as real-time measurements. On the other hand, hardware implementation can be both expensive and time consuming. This paper presents a low cost MATLAB-based pulse oximeter that can be used for rapid evaluation of newly developed signal processing techniques and algorithms. Flexibility to apply different signal processing techniques, providing both processed and unprocessed data along with low implementation cost are the important features of this design which makes it ideal for research and development purposes, as well as commercial, hospital and healthcare application.

Potential low cost, safe, high efficiency propellant for future space program

Science.gov (United States)

Zhou, D.

2005-03-01

Mixtures of nanometer or micrometer sized carbon powder suspended in hydrogen and methane/hydrogen mixtures are proposed as candidates for low cost, high efficiency propellants for future space programs. While liquid hydrogen has low weight and high heat of combustion per unit mass, because of the low mass density the heat of combustion per unit volume is low, and the liquid hydrogen storage container must be large. The proposed propellants can produce higher gross heat combustion with small volume with trade off of some weight increase. Liquid hydrogen can serve as the fluid component of the propellant in the mixtures and thus used by current rocket engine designs. For example, for the same volume a mixture of 5% methane and 95% hydrogen, can lead to an increase in the gross heat of combustion by about 10% and an increase in the Isp (specific impulse) by 21% compared to a pure liquid hydrogen propellant. At liquid hydrogen temperatures of 20.3 K, methane will be in solid state, and must be formed as fine granules (or slush) to satisfy the requirement of liquid propellant engines.

In vitro anticoagulation monitoring of low-molecular-weight heparin

Institute of Scientific and Technical Information of China (English)

WANG Jian-qi; SHI Xu-bo; YANG Jin-gang; HU Da-yi

2009-01-01

Background Although low-molecular-weight heparin has replaced unfractionated heparin to become the primary anticoagulation drug for treatment of acute coronary syndrome, there is no convenient bedside monitoring method. We explored the best laboratory monitoring method of low-molecular-weight heparins (enoxapadn, dalteparin, and nadroparin) by use of the Sonoclot coagulation analyzer to monitor the activated clotting time.Methods Atotal of 20 healthy volunteers were selected and 15 ml of fasting venous blood samples were collected and incubated. Four coagulants, kaolin, diatomite, glass bead, and magnetic stick, were used to determine the activated clotting time of the low-molecular-weight heparins at different in vitro anti-Xa factor concentrations. A correlation analysis was made to obtain the regression equation. The activated clotting time of the different low-molecular-weight heparins with the same anti-Xa factor concentration was monitored when the coagulant glass beads were applied. Results The activated clotting time measured using the glass beads, diatomite, kaolin, and magnetic stick showed a linear correlation with the concentration of nadroparin (r= 0.964, 0.966, 0.970, and 0.947, respectively). The regression equation showed that the linear slopes of different coagulants were significantly different (glass beads 230.03 s/IU,diatomite 89.91 s/IU, kaolin 50.87 s/IU, magnetic stick could not be calculated). When the concentration of the anti-Xa factor was the same for different low-molecular-weight heparins, the measured activated clotting time was different after the application of the glass bead coagulant.Conclusions The glass bead coagulant is most feasible for monitoring the in vitro anticoagulation activity of nadroparin.The different effects of different low-molecular-weight heparins on the activated clotting time may be related to the different anti-Ila activities.

High-precision and low-cost vibration generator for low-frequency calibration system

Science.gov (United States)

Li, Rui-Jun; Lei, Ying-Jun; Zhang, Lian-Sheng; Chang, Zhen-Xin; Fan, Kuang-Chao; Cheng, Zhen-Ying; Hu, Peng-Hao

2018-03-01

Low-frequency vibration is one of the harmful factors that affect the accuracy of micro-/nano-measuring machines because its amplitude is significantly small and it is very difficult to avoid. In this paper, a low-cost and high-precision vibration generator was developed to calibrate an optical accelerometer, which is self-designed to detect low-frequency vibration. A piezoelectric actuator is used as vibration exciter, a leaf spring made of beryllium copper is used as an elastic component, and a high-resolution, low-thermal-drift eddy current sensor is applied to investigate the vibrator’s performance. Experimental results demonstrate that the vibration generator can achieve steady output displacement with frequency range from 0.6 Hz to 50 Hz, an analytical displacement resolution of 3.1 nm and an acceleration range from 3.72 mm s-2 to 1935.41 mm s-2 with a relative standard deviation less than 1.79%. The effectiveness of the high-precision and low-cost vibration generator was verified by calibrating our optical accelerometer.

Maternal risk factors associated with low birth weight

International Nuclear Information System (INIS)

Khan, N.; Jamal, M.

2003-01-01

Objective: To determine the association of socio-demographic, maternal, medical and obstetric risk factors with low birth weight. Results: The mean weight of cases was 2.08 kg as compared to 3.1 in controls. Forty-sixty percent of cases were preterm. The factors like maternal malnutrition, young age of the mothers, poverty, close birth spacing, hypertension and antenatal per vagamin (p/v) bleeding during pregnancy have independent effect in causing low birth weight (LBW). Conclusion: Maternal bio social, medical and obstetric factors have strong association with LBW. To overcome this problem, special attention is required to strengthen the mother and child health care services in the community. (author)

Impaired kidney growth in low-birth-weight children

DEFF Research Database (Denmark)

Schmidt, Ida M; Chellakooty, Marla; Boisen, Kirsten A

2005-01-01

BACKGROUND: Low birth weight is an important risk factor for hypertension and unfavorable prognoses of a number of renal diseases. It is also associated with reduced kidney size and nephron number. A differentiation between the effects of low birth weight versus being born premature or small...... for gestational age has, however, not been addressed. METHODS: The influence of weight for gestational age (percentage deviation from expected mean), gestational age, birth weight, and early diet on kidney growth was studied in 178 children born pre- or postmature and/or small or large for gestational age......, comparing them to 717 mature children, birth weight appropriate for gestational age. Kidney size was determined by bilateral ultrasonography measuring length, width and depth, using the equation of an ellipsoid for volume calculation. The examinations were performed at 0, 3, and 18 months of age together...

Features of Physical and Neuro-Psychological Development of Children with Low, Very Low and Extremely Low Birth Weight in Different Age Periods of Life

Directory of Open Access Journals (Sweden)

I. A. Deev

2016-01-01

Full Text Available Analysis of features of physical and neuro-psychological development of children with low, very low and extremely low birth weight in different age periods is carried out according to cohort studies of newborns with different gestational age and birth weight, presented in electronic databases PubMed and Medscape. It is revealed that the overwhelming number of children with low, very low and extremely low birth weight, gain physical and neuro- psychological development impairments, hearing and vision disorders of varying severity, violation of motor function, intelligence and cognitive skills infringement in an older age. In this regard, it is actual not only to develop new neonatal reanimation and intensive care technologies, but also to ensure adequate prevention of preterm birth in the group of women with a high degree of perinatal risk. All this will further allow preventing increase in children with disabling conditions number among premature infants.

Low body weight/thinness, overweight and obesity of children and adolescents from a Brazilian region of low economic status

Directory of Open Access Journals (Sweden)

Dartagnan Pinto Guedes

2013-12-01

Full Text Available OBJECTIVE: To assess the prevalence of low body weight/thinness, overweight and obesity in a representative sample of children and adolescents from a Brazilian region with low economic development. METHODS: A total of 982 girls and 986 boys, aged seven to 17 years old and assisted by Segundo Tempo Program, from Montes Claros, Minas Gerais, Brazil, were included in the study. Low body weight/thinness, overweight and obesity were defined based on body mass cut-off indexes recommended by the International Obesity Task Force. The prevalence of the nutritional status according to sex and age was compared by chi-square test. RESULTS: In girls, the frequency of low body weight/thinness, overweight and obesity was 4.1, 18.4 and 3.8%, respectively; in boys, these percentages were 6.3, 13.2 and 2.9%, respectively. The low body weight/thinness for girls raised from 2.7% (7-10 years old to 5.5% (15-17 years old; the body weight excess (overweight and obesity decreased from 30.1 to 16.2% for the same age groups. In boys, the corresponding trends were from 3.2 to 9.4% for low body weight/thinness, and from 23.4 to 9.2%, for body weight excess. CONCLUSIONS: The data indicate that, even in a region with low economic status, the body weight excess was the main problem associated with nutritional health. The high overweight and obesity prevalence rates indicate the need of public policies for promoting healthy feeding behaviors and physical activity.

Increasing Low Birth Weight Rates: Deliveries in a Tertiary Hospital in Istanbul

OpenAIRE

Berrin Telatar; Orhan Ünal; Abdülkadir Piçak; Lale Ger; Serdar Cömert; Cem Turan; Yasemin Akin

2010-01-01

Objective:Prevalence of low birth weight deliveries may vary across different environments. The necessity of determination of regional data prompted this study. Methods:Information of all deliveries from January 2004 to December 2008 was obtained from delivery registry records retrospectively. Initial data including birth weight, vital status, sex, maternal age and mode of delivery were recorded using medical files. The frequency of low birth weight, very low birth weight, extremely low birth...

High reliability low jitter 80 kV pulse generator

Directory of Open Access Journals (Sweden)

M. E. Savage

2009-08-01

Full Text Available Switching can be considered to be the essence of pulsed power. Time accurate switch/trigger systems with low inductance are useful in many applications. This article describes a unique switch geometry coupled with a low-inductance capacitive energy store. The system provides a fast-rising high voltage pulse into a low impedance load. It can be challenging to generate high voltage (more than 50 kilovolts into impedances less than 10  Ω, from a low voltage control signal with a fast rise time and high temporal accuracy. The required power amplification is large, and is usually accomplished with multiple stages. The multiple stages can adversely affect the temporal accuracy and the reliability of the system. In the present application, a highly reliable and low jitter trigger generator was required for the Z pulsed-power facility [M. E. Savage, L. F. Bennett, D. E. Bliss, W. T. Clark, R. S. Coats,J. M. Elizondo, K. R. LeChien, H. C. Harjes, J. M. Lehr, J. E. Maenchen, D. H. McDaniel, M. F. Pasik, T. D. Pointon, A. C. Owen, D. B. Seidel, D. L. Smith, B. S. Stoltzfus, K. W. Struve, W. A. Stygar, L. K. Warne, and J. R. Woodworth, 2007 IEEE Pulsed Power Conference, Albuquerque, NM (IEEE, Piscataway, NJ, 2007, p. 979]. The large investment in each Z experiment demands low prefire probability and low jitter simultaneously. The system described here is based on a 100 kV DC-charged high-pressure spark gap, triggered with an ultraviolet laser. The system uses a single optical path for simultaneously triggering two parallel switches, allowing lower inductance and electrode erosion with a simple optical system. Performance of the system includes 6 ns output rise time into 5.6  Ω, 550 ps one-sigma jitter measured from the 5 V trigger to the high voltage output, and misfire probability less than 10^{-4}. The design of the system and some key measurements will be shown in the paper. We will discuss the

Low-cost satellite mechanical design and construction

Science.gov (United States)

Boisjolie-Gair, Nathaniel; Straub, Jeremy

2017-05-01

This paper presents a discussion of techniques for low-cost design and construction of a CubeSat mechanical structure that can serve as a basis for academic programs and a starting point for government, military and commercial large-scale sensing networks, where the cost of each node must be minimized to facilitate system affordability and lower the cost and associated risk of losing any node. Spacecraft Design plays a large role in manufacturability. An intentionally simplified mechanical design is presented which reduces machining costs, as compared to more intricate designs that were considered. Several fabrication approaches are evaluated relative to the low-cost goal.

Effect of weight loss by a low-fat diet and a low-carbohydrate diet on peptide YY levels

OpenAIRE

Essah, P. A.; Levy, J. R.; Sistrun, S. N.; Kelly, S. M.; Nestler, J. E.

2010-01-01

Objective To compare the effects of weight loss by an energy-restricted low-fat diet versus low-carbohydrate diet on serum peptide YY (PYY) levels. Design 8-week prospective study of 30 obese adults (mean age: 42.8 ± 2.0 years, mean BMI 35.5 ± 0.6 kg/m2). Results After 8 weeks, subjects on the low-carbohydrate diet lost substantially more weight than those on the low-fat diet (5.8 kg vs. 0.99 kg, p

Rabbit System. Low cost, high reliability front end electronics featuring 16 bit dynamic range

International Nuclear Information System (INIS)

Drake, G.; Droege, T.F.; Nelson, C.A. Jr.; Turner, K.J.; Ohska, T.K.

1985-10-01

A new crate-based front end system has been built which features low cost, compact packaging, command capability, 16 bit dynamic range digitization, and a high degree of redundancy. The crate can contain a variety of instrumentation modules, and is designed to be situated close to the detector. The system is suitable for readout of a large number of channels via parallel multiprocessor data acquisition

Is low back pain in youth associated with weight at birth?

DEFF Research Database (Denmark)

Hestbæk, Lise; Leboeuf-Yde, Charlotte; Kyvik, Kirsten Ohm

2003-01-01

INTRODUCTION: Low back pain has been associated with an increased risk of several diseases and with poor general health. Also low birth weight has been associated with an increased susceptibility to various diseases as well as with poor general health. Thus, low birth weight could be a common fac...

Factors predisposing to low birth weight in Jimma Hospital South ...

African Journals Online (AJOL)

Background: Low birth weight continues to remain a major public health problem in Ethiopia in contrast to what is observed in many developing countries. Objectives: To assess some of the predisposing factors to low birth weight among deliveries in Jimma hospital. Design: Cross-sectional case referent study.

Design for ASIC reliability for low-temperature applications

Science.gov (United States)

Chen, Yuan; Mojaradi, Mohammad; Westergard, Lynett; Billman, Curtis; Cozy, Scott; Burke, Gary; Kolawa, Elizabeth

2005-01-01

In this paper, we present a methodology to design for reliability for low temperature applications without requiring process improvement. The developed hot carrier aging lifetime projection model takes into account both the transistor substrate current profile and temperature profile to determine the minimum transistor size needed in order to meet reliability requirements. The methodology is applicable for automotive, military, and space applications, where there can be varying temperature ranges. A case study utilizing this methodology is given to design for reliability into a custom application-specific integrated circuit (ASIC) for a Mars exploration mission.

Low-cost autonomous perceptron neural network inspired by quantum computation

Science.gov (United States)

Zidan, Mohammed; Abdel-Aty, Abdel-Haleem; El-Sadek, Alaa; Zanaty, E. A.; Abdel-Aty, Mahmoud

2017-11-01

Achieving low cost learning with reliable accuracy is one of the important goals to achieve intelligent machines to save time, energy and perform learning process over limited computational resources machines. In this paper, we propose an efficient algorithm for a perceptron neural network inspired by quantum computing composite from a single neuron to classify inspirable linear applications after a single training iteration O(1). The algorithm is applied over a real world data set and the results are outer performs the other state-of-the art algorithms.

Long life, low cost, rechargeable AgZn battery for non-military applications

Science.gov (United States)

Brown, Curtis C.

1996-03-01

Of the rechargeable (secondary) battery systems with mature technology, the silver oxide-zinc system (AgZn) safely offers the highest power and energy (watts and watt hours) per unit of volume and mass. As a result they have long been used for aerospace and defense applications where they have also proven their high reliability. In the past, the expense associated with the cost of silver and the resulting low production volume have limited their commercial application. However, the relative low cost of silver now make this system feasible in many applications where high energy and reliability are required. One area of commercial potential is power for a new generation of sophisticated, portable medical equipment. AgZn batteries have recently proven ``enabling technology'' for power critical, advanced medical devices. By extending the cycle calendar life to the system (offers both improved performance and lower operating cost), a combination is achieved which may enable a wide range of future electrical devices. Other areas where AgZn batteries have been used in nonmilitary applications to provide power to aid in the development of commercial equipment have been: (a) Electrically powered vehicles; (b) Remote sensing in nuclear facilities; (c) Special effects equipment for movies; (d) Remote sensing in petroleum pipe lines; (e) Portable computers; (f) Fly by wire systems for commercial aircraft; and (g) Robotics. However none of these applications have progressed to the level where the volume required will significantly lower cost.

New Technologies for Reliable, Low-Cost In Situ Resource Utilization

Science.gov (United States)

Ramohalli, Kumar

1998-01-01

New technologies can dramatically alter overall mission feasibility, architecture, window-of-opportunity, and science return. In the specific context of planetary exploration/development, several new technologies have been recently developed. It is significant that every one of these new technologies won a NASA NTR award in 1997-1998. In the area of low-cost space access and planetary transportation, hybrids are discussed. Whether we carry all of the fuel and oxidizer from Earth, or we make some or all of it in situ, mass advantages are shown through calculations. The hybrisol concept, where a solid fuel is cast over a state-of-the-art solid propellant, is introduced as a further advance in these ideas,. Thus, the motor operates as a controllable, high Isp rocket initially, and transitions to a high-thrust rocket after ascent, at which time the empty oxidizer tank is jettisoned. Again, calculations show significant advantages. In the area of efficient energy use for various mechanical actuations and robotic movements, muscle wires are introduced. Not only do we present detailed systems-level schemes, but we also present results from a hardware mechanism that has seen more than 18,000 cycles of operation. Recognizing that power is the real issue in planetary exploration/ development, the concept of LORPEX is introduced as a means of converting low-level energy accumulation into sudden bursts of power that can give factors of millions (in power magnification) in the process; this robot employs a low-power In Situ Resource Utilization (ISRU) unit to accumulate ISRU-generated fuel and oxidizer to be consumed at a rapid rate, chemically in an engine. Drilling, hopping, jumping, and ascent, or even return to Earth, are possible. Again, the hardware has been built and initial systems checkout demonstrated. Long-duration exploration and long-distance travel are made possible through aerobots, as is well known for planets with an atmosphere. However, power has again been a

Single-Phase Hybrid Switched Reluctance Motor for Low-Power Low-Cost Applications

DEFF Research Database (Denmark)

Lu, Kaiyuan; Rasmussen, Peter Omand; Jakobsen, Uffe

2011-01-01

This paper presents a new single-phase, Hybrid Switched Reluctance (HSR) motor for low-cost, low-power, pump or fan drive systems. Its single-phase configuration allows use of a simple converter to reduce the system cost. Cheap ferrite magnets are used and arranged in a special flux concentration...... manner to increase effectively the torque density and efficiency of this machine. The efficiency of this machine is comparable to the efficiency of a traditional permanent magnet machine in the similar power range. The cogging torque, due to the existence of the permanent magnetic field, is beneficially...

The role of energy expenditure in the differential weight loss in obese women on low-fat and low-carbohydrate diets.

Science.gov (United States)

Brehm, Bonnie J; Spang, Suzanne E; Lattin, Barbara L; Seeley, Randy J; Daniels, Stephen R; D'Alessio, David A

2005-03-01

We have recently reported that obese women randomized to a low-carbohydrate diet lost more than twice as much weight as those following a low-fat diet over 6 months. The difference in weight loss was not explained by differences in energy intake because women on the two diets reported similar daily energy consumption. We hypothesized that chronic ingestion of a low-carbohydrate diet increases energy expenditure relative to a low-fat diet and that this accounts for the differential weight loss. To study this question, 50 healthy, moderately obese (body mass index, 33.2 +/- 0.28 kg/m(2)) women were randomized to 4 months of an ad libitum low-carbohydrate diet or an energy-restricted, low-fat diet. Resting energy expenditure (REE) was measured by indirect calorimetry at baseline, 2 months, and 4 months. Physical activity was estimated by pedometers. The thermic effect of food (TEF) in response to low-fat and low-carbohydrate breakfasts was assessed over 5 h in a subset of subjects. Forty women completed the trial. The low-carbohydrate group lost more weight (9.79 +/- 0.71 vs. 6.14 +/- 0.91 kg; P fat (6.20 +/- 0.67 vs. 3.23 +/- 0.67 kg; P low-fat group. There were no differences in energy intake between the diet groups as reported on 3-d food records at the conclusion of the study (1422 +/- 73 vs. 1530 +/- 102 kcal; 5954 +/- 306 vs. 6406 +/- 427 kJ). Mean REE in the two groups was comparable at baseline, decreased with weight loss, and did not differ at 2 or 4 months. The low-fat meal caused a greater 5-h increase in TEF than did the low-carbohydrate meal (53 +/- 9 vs. 31 +/- 5 kcal; 222 +/- 38 vs. 130 +/- 21 kJ; P = 0.017). Estimates of physical activity were stable in the dieters during the study and did not differ between groups. These results confirm that short-term weight loss is greater in obese women on a low-carbohydrate diet than in those on a low-fat diet even when reported food intake is similar. The differential weight loss is not explained by differences

Development of low-cost digital subtraction angiography system

International Nuclear Information System (INIS)

Ando, Yutaka; Kobayashi, Takeshi; Imai, Yutaka; Yagishita, Akira; Kunieda, Etsuo.

1983-01-01

We developed a simple and low-cost DSA system. This system consists of a conventional fluoroscopic equipment for the GI tract and a mini-computer (GAMMA-11) which are connected each other with a video-disc recorder. The uniqueness of our system are 1. low-cost, 2. low-radiation dose, 3. off-line processing, 4. flexibility of software. The analysis of the time-density curve and image processing will bring us a more usefull information than DSA alone. (author)

The Study of Mothers’ Periodontal Status and Newborn’s Low Birth Weight

Directory of Open Access Journals (Sweden)

M. Shirinzad

2006-10-01

Full Text Available Introduction & Objective: Recent studies have presented evidence that periodontal disease in pregnant women may be a determining factor for newborn’s low birth weight. The present investigation was carried out to verify whether there is an association between maternal periodontal disease and low birth weight of newborns.Materials and Methods: This was a case-control study on 330 women, containing 110 mothers having live newborns with weight 2500 g (control group. The existence of an association between periodontal disease and newborn’s low birth weight was evaluated by means of analytic statistics that considered other risk factors for low weight. The two groups were compared with regard to urinary infection, preeclampsia, premature rupture of membrane, placenta previa, primiparous, smoking, age, height, socioeconomic status and periodontal disease.Results: There were no statistically significant differences between the case and control groups for any of the covariables (P>0.05, but there was significant differences for principal independent variable (periodontal disease P<0.05.Conclusion: Results indicated a positive association between periodontal disease and newborn’s low birth weight. Thus periodontal disease is a possible risk factor for low birth weight.

A low-cost colorimeter.

Science.gov (United States)

Jones, N B; Riley, C; Sheya, M S; Hosseinmardi, M M

1984-01-01

A need for a colorimeter with low capital and maintenance costs has been suggested for countries with foreign exchange problems and no local medical instrumentation industry. This paper puts forward a design for such a device based on a domestic light-bulb, photographic filters and photovoltaic cells. The principle of the design is the use of a balancing technique involving twin light paths for test solution and reference solution and an electronic bridge circuit. It is shown that proper selection of the components will allow the cost objectives to be met and also provide acceptable linearity, precision, accuracy and repeatability.

A Systematic Review againts Risk Factors on The Low-weight Birth Incidence in Indonesia

Directory of Open Access Journals (Sweden)

Estri Kusumawati

2017-04-01

Full Text Available The number of maternal and infant mortality in Indonesia is still high. Most of Indonesian neonatal mortality occurs in the first week of life with low-weight birth (LwB / premature as the main cause. Birth weight is an important and reliable indicator for the survival of neonates and infants, both in terms of physical growth and development of the mental status. LwB caused by many complicated factors that related each others as if maternal factors that also affect the baby's weight at their birth. The purpose of this study was to identified the determinant factors that affect the incidence of LwB based on the related research topic. The data source obtained from the scientific journals with LwB studies during the years of 2009 untill 2016 with the total of 14 studies consisting of scientific papers and thesis. In this study, researchers divided into five risk factors associated with LwB. From those factors then it divided again into 20 aspects. The result show that the maternal nutritional aspec and anemia status have become significant risk factors againts the low-weight birth incidence.

The high cost of low-acuity ICU outliers.

Science.gov (United States)

Dahl, Deborah; Wojtal, Greg G; Breslow, Michael J; Holl, Randy; Huguez, Debra; Stone, David; Korpi, Gloria

2012-01-01

Direct variable costs were determined on each hospital day for all patients with an intensive care unit (ICU) stay in four Phoenix-area hospital ICUs. Average daily direct variable cost in the four ICUs ranged from $1,436 to $1,759 and represented 69.4 percent and 45.7 percent of total hospital stay cost for medical and surgical patients, respectively. Daily ICU cost and length of stay (LOS) were higher in patients with higher ICU admission acuity of illness as measured by the APACHE risk prediction methodology; 16.2 percent of patients had an ICU stay in excess of six days, and these LOS outliers accounted for 56.7 percent of total ICU cost. While higher-acuity patients were more likely to be ICU LOS outliers, 11.1 percent of low-risk patients were outliers. The low-risk group included 69.4 percent of the ICU population and accounted for 47 percent of all LOS outliers. Low-risk LOS outliers accounted for 25.3 percent of ICU cost and incurred fivefold higher hospital stay costs and mortality rates. These data suggest that severity of illness is an important determinant of daily resource consumption and LOS, regardless of whether the patient arrives in the ICU with high acuity or develops complications that increase acuity. The finding that a substantial number of long-stay patients come into the ICU with low acuity and deteriorate after ICU admission is not widely recognized and represents an important opportunity to improve patient outcomes and lower costs. ICUs should consider adding low-risk LOS data to their quality and financial performance reports.

Key issues for low-cost FGD installations

Energy Technology Data Exchange (ETDEWEB)

DePriest, W.; Mazurek, J.M. [Sargent & Lundy LLC, Chicago, IL (United States)

1995-12-01

This paper will discuss various methods for installing low-cost FGD systems. The paper will include a discussion of various types of FGD systems available, both wet and dry, and will compare the relative cost of each type. Important design issues, such as use of spare equipment, materials of construction, etc. will be presented. An overview of various low-cost construction techniques (i.e., modularization) will be included. This paper will draw heavily from Sargent & Lundy`s database of past and current FGD projects together with information we gathered for several Electric Power Research Institute (EPRI) studies on the subject.

Clean utilization of low-rank coals for low-cost power generation

International Nuclear Information System (INIS)

Sondreal, E.A.

1992-01-01

Despite the unique utilization problems of low-rank coals, the ten US steam electric plants having the lowest operating cost in 1990 were all fueled on either lignite or subbituminous coal. Ash deposition problems, which have been a major barrier to sustaining high load on US boilers burning high-sodium low-rank coals, have been substantially reduced by improvements in coal selection, boiler design, on-line cleaning, operating conditions, and additives. Advantages of low-rank coals in advanced systems are their noncaking behavior when heated, their high reactivity allowing more complete reaction at lower temperatures, and the low sulfur content of selected deposits. The principal barrier issues are the high-temperature behavior of ash and volatile alkali derived from the coal-bound sodium found in some low-rank coals. Successful upgrading of low-rank coals requires that the product be both stable and suitable for end use in conventional and advanced systems. Coal-water fuel produced by hydrothermal processing of high-moisture low-rank coal meets these criteria, whereas most dry products from drying or carbonizing in hot gas tend to create dust and spontaneous ignition problems unless coated, agglomerated, briquetted, or afforded special handling

Wet-process Fabrication of Low-cost All-solid Wire-shaped Solar Cells on Manganese-plated Electrodes

International Nuclear Information System (INIS)

Fan, Xing; Zhang, Xiaoying; Zhang, Nannan; Cheng, Li; Du, Jun; Tao, Changyuan

2015-01-01

Highlights: • All-solid wire-shaped flexible solar cells are firstly assembled on low-cost Mn-plated fibers. • Energy efficiency improved by >27% after coating a layer of Mn on various substrates. • The cell is fabricated via wet process under low temperature and mild pH conditions. • Stable flexible solar cells are realized on lightweight and low-cost polymer fiber. - Abstract: All-solid wire-shaped flexible solar cells are assembled for the first time on low-cost Mn-plated wires through wet-process fabrication under low temperature and mild pH conditions. With a price cheap as the steel, metal Mn can be easily plated on almost any substrates, and evidently promote the photovoltaic efficiency of wire-shaped solar cells on various traditional metal wire substrates, such as Fe and Ti, by 27% and 65%, respectively. Flexible solar cell with much lower cost and weight is assembled on Mn-plated polymer substrate, and is still capable of giving better performance than that on Fe or Ti substrate. Both its mechanical and chemical stability are good for future weaving applications. Owing to the wire-type structure, such low-cost metals as Mn, which are traditionally regarded as unsuitable for solar cells, may provide new opportunities for highly efficient solar cells

A Low-Cost Data Acquisition System for Automobile Dynamics Applications.

Science.gov (United States)

González, Alejandro; Olazagoitia, José Luis; Vinolas, Jordi

2018-01-27

This project addresses the need for the implementation of low-cost acquisition technology in the field of vehicle engineering: the design, development, manufacture, and verification of a low-cost Arduino-based data acquisition platform to be used in <80 Hz data acquisition in vehicle dynamics, using low-cost accelerometers. In addition to this, a comparative study is carried out of professional vibration acquisition technologies and low-cost systems, obtaining optimum results for low- and medium-frequency operations with an error of 2.19% on road tests. It is therefore concluded that these technologies are applicable to the automobile industry, thereby allowing the project costs to be reduced and thus facilitating access to this kind of research that requires limited resources.

High-Efficient Low-Cost Photovoltaics Recent Developments

CERN Document Server

Petrova-Koch, Vesselinka; Goetzberger, Adolf

2009-01-01

A bird's-eye view of the development and problems of recent photovoltaic cells and systems and prospects for Si feedstock is presented. High-efficient low-cost PV modules, making use of novel efficient solar cells (based on c-Si or III-V materials), and low cost solar concentrators are in the focus of this book. Recent developments of organic photovoltaics, which is expected to overcome its difficulties and to enter the market soon, are also included.

Race, Ethnicity, Concentrated Poverty, and Low Birth Weight Disparities

OpenAIRE

Sims, Mario; Sims, Tammy L.; Bruce, Marino A.

2008-01-01

This study examines the extent to which the relationship between area socioeconomic position (SEP) and low birth weight (LBW) varies by race and ethnicity. A cross-sectional, secondary data analysis was performed with 1992-1994 Vital Statistics and 1990 U.S. Census data for selected metropolitan areas. Low birth weight (< 2500 grams) rates were calculated for non-Hispanic Black, Latino, and non-Hispanic White live singleton births. Concentrated poverty was defined as poor persons living in ne...

Development of a Low-Cost Electronic Wheelchair with Obstacle Avoidance Feature

Directory of Open Access Journals (Sweden)

Edwin Romeroso Arboleda

2015-12-01

Full Text Available  A low-cost electronic wheelchair was designed and developed which can perform the similar functions and features as a commercially available wheelchair. It also provides obstacle avoidance capability as added value. The electronic wheelchair was  realized by modification of a lightweight manual wheelchair. It uses two electric motors each of 320 W 24 V DC, 5-24 VDC 6 A H-bride drivers, and a 12 V 17 Ah rechargeable lead acid battery. It equipped with switches, joystick, infrared sensors and ultrasonic sensors. A GizduinoAtMega 328 microcontroller is used to read and interpret commands. User’s acceptance evaluation results shows that the developed low-cost wheelchair is able to receive and interpret commands provided by the joystick, detect if a person  is seated on it, navigate to avoid obstacles as well as to detect edge and stairs. Technical evaluation result shows that on a flat surface it could move at the speed of around 39.9 m/minute without load and 32 m/minute with 80 kg load. At 10 degrees inclined surface, the maximum weight limit is 30 kg with the speed of 12 m/minute. At 20 degrees inclined surface, the maximum weight limit is 10 kg with the speed of 3 m/minute. Regarding cost, it is just a fraction of a cost compared to the commercially available model. Therefore, the developed wheelchair offers an option for potential users who cannot afford to buy the commercially available one.

Low Birth Weight as The Risk factor of Coronary Heart Diseases

Directory of Open Access Journals (Sweden)

Joko Wahyu Wibowo

2011-12-01

Full Text Available Low birth weight, a nutritional deficiency is related to the increased in the coronary heart disease insidence. Low birth weight is correlated with the hipotalamus-pituitary-adrenal responsible for the the concentration of cortisol in sirculation, increased in homosistein, insuline resistence and increased C reactive protein playing role on the aterosclerosis process predispose the corronary disease. This paper will discuss the relationship between the low birth weight and the ateroclesoris process leading to coronary heart disesase (Sains Medika, 3(2:185-200.

Factors associated with choice of a low-fat or low-carbohydrate diet during a behavioral weight loss intervention.

Science.gov (United States)

McVay, Megan A; Voils, Corrine I; Coffman, Cynthia J; Geiselman, Paula J; Kolotkin, Ronette L; Mayer, Stephanie B; Smith, Valerie A; Gaillard, Leslie; Turner, Marsha J; Yancy, William S

2014-12-01

Individuals undertaking a weight loss effort have a choice among proven dietary approaches. Factors contributing to choice of either a low-fat/low-calorie diet or a low-carbohydrate diet, two of the most studied and popular dietary approaches, are unknown. The current study used data from participants randomized to the 'choice' arm of a trial examining whether being able to choose a diet regimen yields higher weight loss than being randomly assigned to a diet. At study entry, participants attended a group session during which they were provided tailored feedback indicating which diet was most consistent with their food preferences using the Geiselman Food Preference Questionnaire (FPQ), information about both diets, and example meals for each diet. One week later, they indicated which diet they chose to follow during the 48-week study, with the option of switching diets after 12 weeks. Of 105 choice arm participants, 44 (42%) chose the low-fat/low-calorie diet and 61 (58%) chose the low-carbohydrate diet. In bivariate analyses, diet choice was not associated with age, race, sex, education, BMI, or diabetes (all p > 0.05). Low-carbohydrate diet choice was associated with baseline higher percent fat intake (p = 0.007), lower percent carbohydrate intake (p = 0.02), and food preferences consistent with a low-carbohydrate diet according to FPQ (p model, only FPQ diet preference was associated with diet choice (p = 0.001). Reported reasons for diet choice were generally similar for those choosing either diet; however, concerns about negative health effects of the unselected diet was rated as more influential among participants selecting the low-fat diet. Only three low-carbohydrate and two low-fat diet participants switched diets at 12 weeks. Results suggest that when provided a choice between two popular weight loss dietary approaches, an individual's selection is likely influenced by baseline dietary intake pattern, and especially by his or her

Effects of low-carbohydrate vs low-fat diets on weight loss and cardiovascular risk factors: a meta-analysis of randomized controlled trials.

Science.gov (United States)

Nordmann, Alain J; Nordmann, Abigail; Briel, Matthias; Keller, Ulrich; Yancy, William S; Brehm, Bonnie J; Bucher, Heiner C

2006-02-13

Low-carbohydrate diets have become increasingly popular for weight loss. However, evidence from individual trials about benefits and risks of these diets to achieve weight loss and modify cardiovascular risk factors is preliminary. We used the Cochrane Collaboration search strategy to identify trials comparing the effects of low-carbohydrate diets without restriction of energy intake vs low-fat diets in individuals with a body mass index (calculated as weight in kilograms divided by the square of height in meters) of at least 25. Included trials had to report changes in body weight in intention-to-treat analysis and to have a follow-up of at least 6 months. Two reviewers independently assessed trial eligibility and quality of randomized controlled trials. Five trials including a total of 447 individuals fulfilled our inclusion criteria. After 6 months, individuals assigned to low-carbohydrate diets had lost more weight than individuals randomized to low-fat diets (weighted mean difference, -3.3 kg; 95% confidence interval [CI], -5.3 to -1.4 kg). This difference was no longer obvious after 12 months (weighted mean difference, -1.0 kg; 95% CI, -3.5 to 1.5 kg). There were no differences in blood pressure. Triglyceride and high-density lipoprotein cholesterol values changed more favorably in individuals assigned to low-carbohydrate diets (after 6 months, for triglycerides, weighted mean difference, -22.1 mg/dL [-0.25 mmol/L]; 95% CI, -38.1 to -5.3 mg/dL [-0.43 to -0.06 mmol/L]; and for high-density lipoprotein cholesterol, weighted mean difference, 4.6 mg/dL [0.12 mmol/L]; 95% CI, 1.5-8.1 mg/dL [0.04-0.21 mmol/L]), but total cholesterol and low-density lipoprotein cholesterol values changed more favorably in individuals assigned to low-fat diets (weighted mean difference in low-density lipoprotein cholesterol after 6 months, 5.4 mg/dL [0.14 mmol/L]; 95% CI, 1.2-10.1 mg/dL [0.03-0.26 mmol/L]). Low-carbohydrate, non-energy-restricted diets appear to be at least as

Resistance Training using Low Cost Elastic Tubing is Equally Effective to Conventional Weight Machines in Middle-Aged to Older Healthy Adults: A Quasi-Randomized Controlled Clinical Trial.

Science.gov (United States)

Lima, Fabiano F; Camillo, Carlos A; Gobbo, Luis A; Trevisan, Iara B; Nascimento, Wesley B B M; Silva, Bruna S A; Lima, Manoel C S; Ramos, Dionei; Ramos, Ercy M C

2018-03-01

The objectives of the study were to compare the effects of resistance training using either a low cost and portable elastic tubing or conventional weight machines on muscle force, functional exercise capacity, and health-related quality of life (HRQOL) in middle-aged to older healthy adults. In this clinical trial twenty-nine middle-aged to older healthy adults were randomly assigned to one of the three groups a priori defined: resistance training with elastic tubing (ETG; n = 10), conventional resistance training (weight machines) (CTG; n = 9) and control group (CG, n = 10). Both ETG and CTG followed a 12-week resistance training (3x/week - upper and lower limbs). Muscle force, functional exercise capacity and HRQOL were evaluated at baseline, 6 and 12 weeks. CG underwent the three evaluations with no formal intervention or activity counseling provided. ETG and CTG increased similarly and significantly muscle force (Δ16-44% in ETG and Δ25-46% in CTG, p tubing (a low cost and portable tool) and conventional resistance training using weight machines promoted similar positive effects on peripheral muscle force and functional exercise capacity in middle-aged to older healthy adults.

Relationship between periodontal disease and preterm low birth weight: systematic review.

Science.gov (United States)

Teshome, Amare; Yitayeh, Asmare

2016-01-01

Periodontal disease is a neglected bacterial infection that causes destruction of the periodontium in pregnant women. Yet its impact on the occurrence of adverse pregnancy outcomes has not systematically evaluated and there is no clear statement on the relationship between periodontal disease and preterm low birth weight. The objective of this study was to summarize the evidence on the impact of periodontal disease on preterm low birth weight. We searched the following data bases from January 2005 to December 2015: CINAHL (cumulative index to nursing and allied health literature), MEDLINE, AMED, EMBASE (excerpta medica database), Cochrane library and Google scholar. Only case-control studies with full text in English were eligible. Critical appraisal of the identified articles was done by two authors independently to provide the possible relevance of the papers for inclusion in the review process. The selected Case control studies were critically appraised with 12 items structured checklist adapted from national institute of health (NIH). Odds ratio (OR) or risk ratios (RR) were extracted from the selected studies. The two reviewers who selected the appropriate studies also extracted the data and evaluated the risk of bias. Of 229 articles, ten studies with a total of 2423 participants with a mean age ranged from 13 to 49 years were met the inclusion criteria. The studies focused on preterm birth, low birth weight and /or preterm low birth weight and periodontitis. Of the selected studies, 9 implied an association between periodontal disease and increased risk of preterm birth, low birth weight and /or preterm low birth weight outcome (ORs ranging from 2.04 to 4.19) and only one study found no evidence of association. Periodontal disease may be one of the possible risk factor for preterm low birth weight infant. However, more precise studies with randomized clinical trial with sufficient follow-up period must be done to confirm the association.

Satellite-aided survey sampling and implementation in low- and middle-income contexts: a low-cost/low-tech alternative.

Science.gov (United States)

Haenssgen, Marco J

2015-01-01

The increasing availability of online maps, satellite imagery, and digital technology can ease common constraints of survey sampling in low- and middle-income countries. However, existing approaches require specialised software and user skills, professional GPS equipment, and/or commercial data sources; they tend to neglect spatial sampling considerations when using satellite maps; and they continue to face implementation challenges analogous to conventional survey implementation methods. This paper presents an alternative way of utilising satellite maps and digital aides that aims to address these challenges. The case studies of two rural household surveys in Rajasthan (India) and Gansu (China) compare conventional survey sampling and implementation techniques with the use of online map services such as Google, Bing, and HERE maps. Modern yet basic digital technology can be integrated into the processes of preparing, implementing, and monitoring a rural household survey. Satellite-aided systematic random sampling enhanced the spatial representativeness of the village samples and entailed savings of approximately £4000 compared to conventional household listing, while reducing the duration of the main survey by at least 25 %. This low-cost/low-tech satellite-aided survey sampling approach can be useful for student researchers and resource-constrained research projects operating in low- and middle-income contexts with high survey implementation costs. While achieving transparent and efficient survey implementation at low costs, researchers aiming to adopt a similar process should be aware of the locational, technical, and logistical requirements as well as the methodological challenges of this strategy.

Development of ITM Oxygen Technology for Low-cost and Low-emission Gasification and Other Industrial Applications

Energy Technology Data Exchange (ETDEWEB)

Armstrong, Phillip

2014-11-01

Air Products is carrying out a scope of work under DOE Award No. DE-FE0012065 “Development of ITM Oxygen Technology for Low-cost and Low-emission Gasification and Other Industrial Applications.” The Statement of Project Objectives (SOPO) includes a Task 4f in which a Decision Point shall be reached, necessitating a review of Tasks 2-5 with an emphasis on Task 4f. This Topical Report constitutes the Decision Point Application pertaining to Task 4f. The SOPO under DOE Award No. DE-FE0012065 is aimed at furthering the development of the Ion Transport Membrane (ITM) Oxygen production process toward a demonstration scale facility known as the Oxygen Development Facility (ODF). It is anticipated that the completion of the current SOPO will advance the technology significantly along a pathway towards enabling the design and construction of the ODF. Development progress on several fronts is critical before an ODF project can commence; this Topical Report serves as an early update on the progress in critical development areas. Progress was made under all tasks, including Materials Development, Ceramic Processing Development, Engineering Development, and Performance Testing. Under Task 4f, Air Products carried out a cost and performance study in which several process design and cost parameters were varied and assessed with a process model and budgetary costing exercise. The results show that the major variables include ceramic module reliability, ITM operating temperature, module production yield, and heat addition strategy. High-temperature compact heat exchangers are shown to contribute significant cost benefits, while directly firing into the feed stream to an ITM are even a mild improvement on the high-temperature recuperation approach. Based on the findings to-date, Air Products recommends no changes to the content or emphasis in the current SOPO and recommends its completion prior to another formal assessment of these factors.

Low-cost failure sensor design and development for water pipeline distribution systems.

Science.gov (United States)

Khan, K; Widdop, P D; Day, A J; Wood, A S; Mounce, S R; Machell, J

2002-01-01

This paper describes the design and development of a new sensor which is low cost to manufacture and install and is reliable in operation with sufficient accuracy, resolution and repeatability for use in newly developed systems for pipeline monitoring and leakage detection. To provide an appropriate signal, the concept of a "failure" sensor is introduced, in which the output is not necessarily proportional to the input, but is unmistakably affected when an unusual event occurs. The design of this failure sensor is based on the water opacity which can be indicative of an unusual event in a water distribution network. The laboratory work and field trials necessary to design and prove out this type of failure sensor are described here. It is concluded that a low-cost failure sensor of this type has good potential for use in a comprehensive water monitoring and management system based on Artificial Neural Networks (ANN).

Low-cost in vitro fertilization: current insights

Directory of Open Access Journals (Sweden)

Teoh PJ

2014-08-01

Full Text Available Pek Joo Teoh, Abha MaheshwariAberdeen Fertility Centre, Aberdeen Maternity Hospital, University of Aberdeen, Aberdeen, UKAbstract: Despite the development of in vitro fertilization (IVF more than 30 years ago, the cost of treatment remains high. Furthermore, over the years, more sophisticated technologies and expensive medications have been introduced, making IVF increasingly inaccessible despite the increasing need. Globally, the option to undergo IVF is only available to a privileged few. In recent years, there has been growing interest in exploring strategies to reduce the cost of IVF treatment, which would allow the service to be provided in low-resource settings. In this review, we explore the various ways in which the cost of this treatment can be reduced.Keywords: IVF, low-cost, accessible, developing world

Low Cost, High-Throughput 3-D Pulmonary Imager Using Hyperpolarized Contrast Agents and Low-Field MRI

Science.gov (United States)

2017-10-01

greater gas polarizations and production amounts/ throughputs- benefiting in particular from the advent of com- pact, high-power, relatively low- cost ...Award Number: W81XWH-15-1-0271 TITLE: Low- Cost , High-Throughput 3-D Pulmonary Imager Using Hyperpolarized Contrast Agents and Low-Field MRI...DISTRIBUTION STATEMENT: Approved for Public Release; Distribution Unlimited The views, opinions and/or findings contained in this report are those of the

Anthropometrics parameters and neonatal outcomes from newborns of deliveries women with low weight

Directory of Open Access Journals (Sweden)

Joe Luiz Vieira Garcia Novo

2012-04-01

Full Text Available ABSTRACT Objectives: to assess the anthropometrics assets and outcomes of birthplace newborns from patients classified how low weight through the body weight index. Methods: a retrospective study of patients in labor and newborns from Hospital Santa Lucinda since 03/2009 to 02/2010: 19 of the study group (low weight and 50 of the control group (normal weight. The maternal variables included were: age, parity, puerperium; in the newborns were observed: sex, vitality, anthropometrics values, and outcomes. The statistical analysis involved the use Bioestat 5.0 program. Results: the middle perimeter head of newborns from low weight patients were 33,3 cm, and in the control group were 33,7 cm (p = 0,098; middle left arm perimeter were 10,0 cm and 10,3 cm (p = 0, 097; average weight: 2986,84 and 3165,32 g (p = 0, 0423, average length: 48,37 and 48, 77 cm (p = 0,2165 respectively. The average vitality from newborns after 1 and 5 minutes were: 8,1 - 8,1 (p = 0,9144 and 8,9 - 9,0 (p = 0,911. Conclusion: the weights of newborns from low weight patients in labor denote lower than normal weight patients. Low weight patients signify a risk group during the prenatal care, because there is more probability to be born low weight newborns. Prophylactics educating programs must be realized in order to avoid probable risks in low weight pregnant patients. Support PIBIC - CEPE

Impaired glucose tolerance in healthy men with low body weight

Directory of Open Access Journals (Sweden)

Schmoller André

2011-02-01

Full Text Available Abstract Background Impaired glucose tolerance (IGT and high body mass index (BMI are recognized risk factors for type 2 diabetes mellitus (T2DM. However, data suggest that also underweight predisposes people to develop T2DM. Here, we experimentally tested if already moderate underweight is associated with impaired glucose tolerance as compared to normal weight controls. Obese subjects were included as additional reference group. Method We included three groups of low weight, normal weight, and obese subjects comprising 15 healthy male participants each. All participants underwent a standardized hyperinsulinemic-euglycemic glucose clamp intervention to determine glucose tolerance. In addition, insulin sensitivity index (ISI was calculated by established equation. Results ISI values were higher in low and normal weight than in obese subjects (P P = 0.303. Comparable to obese participants (P = 0.178, glucose tolerance was found decreased in low weight as compared with normal weight subjects (P = 0.007. Pearson's correlation analysis revealed a positive relationship between glucose tolerance and BMI in low (P = 0.043 and normal weight subjects (P = 0.021, an effect that was found inverse in obese participants (P = 0.028. Conclusion Our study demonstrates that not only obese but also healthy people with moderate underweight display glucose intolerance. It is therefore suggested that all deviations from normal BMI may be accompanied by an increased risk of developing T2DM in later life indicating that the maintenance of body weight within the normal range has first priority in the prevention of this disease.

Design of a reliable and low-cost stand-alone micro hydropower station

Energy Technology Data Exchange (ETDEWEB)

Kusakana, K.; Munda, J.L. [Tshwane Univ. of Technology, Pretoria (South Africa)

2008-07-01

A stand-alone micro-hydropower station was presented. The plant was comprised of a squirrel cage induction machine coupled to a Kaplan water turbine. Power converters were used to control the variable frequency and voltage outputs of the generator caused by variations in water flow. The hydropower plant was installed a farm in the Kwazulu-Natal region of South Africa, and was designed to provide electricity in relation to the low power demand of users in the region as well as according to the site's hydrology and topology. Load forecasts for the 8 houses using the system were conducted. A generator with a higher output than the average power needed to feed the load was selected in order to ensure load supply during peak demand. The system was designed to shore energy generated during off-peak periods in batteries. An AC-DC-AC converter was used as an interface between the generator and the load in order to ensure voltage and frequency stabilization. Simulations of plant components were conducted to demonstrate output power supply during water flow variations. Results of the modelling study indicated that power converters are needed to stabilize generator outputs. The hydropower design is a cost-effective means of supplying power to low-income households. 10 refs., 2 tabs., 7 figs.

Weighted Discriminative Dictionary Learning based on Low-rank Representation

International Nuclear Information System (INIS)

Chang, Heyou; Zheng, Hao

2017-01-01

Low-rank representation has been widely used in the field of pattern classification, especially when both training and testing images are corrupted with large noise. Dictionary plays an important role in low-rank representation. With respect to the semantic dictionary, the optimal representation matrix should be block-diagonal. However, traditional low-rank representation based dictionary learning methods cannot effectively exploit the discriminative information between data and dictionary. To address this problem, this paper proposed weighted discriminative dictionary learning based on low-rank representation, where a weighted representation regularization term is constructed. The regularization associates label information of both training samples and dictionary atoms, and encourages to generate a discriminative representation with class-wise block-diagonal structure, which can further improve the classification performance where both training and testing images are corrupted with large noise. Experimental results demonstrate advantages of the proposed method over the state-of-the-art methods. (paper)

Testing low cost anaerobic digestion (AD) systems

Science.gov (United States)

To evaluate the potential for low technology and low cost digesters for small dairies, BARC and researchers from the University of Maryland installed six modified Taiwanese-model field-scale (FS) digesters near the original dairy manure digester. The FS units receive the same post-separated liquid ...

Reliability of supply of switchgear for auxiliary low voltage in substations extra high voltage to high voltage

Directory of Open Access Journals (Sweden)

Perić Dragoslav M.

2015-01-01

Full Text Available Switchgear for auxiliary low voltage in substations (SS of extra high voltages (EHV to high voltage (HV - SS EHV/HV kV/kV is of special interest for the functioning of these important SS, as it provides a supply for system of protection and other vital functions of SS. The article addresses several characteristic examples involving MV lines with varying degrees of independence of their supply, and the possible application of direct transformation EHV/LV through special voltage transformers. Auxiliary sources such as inverters and diesel generators, which have limited power and expensive energy, are also used for the supply of switchgear for auxiliary low voltage. Corresponding reliability indices are calculated for all examples including mean expected annual engagement of diesel generators. The applicability of certain solutions of switchgear for auxiliary low voltage SS EHV/HV, taking into account their reliability, feasibility and cost-effectiveness is analyzed too. In particular, the analysis of applications of direct transformation EHV/LV for supply of switchgear for auxiliary low voltage, for both new and existing SS EHV/HV.

Low-Cost, High-Throughput 3-D Pulmonary Imager Using Hyperpolarized Contrast Agents and Low-Field MRI

Science.gov (United States)

2017-10-01

low- cost and high-throughput was a key element proposed for this project, which we believe will be of significant benefit to the patients suffering...Award Number: W81XWH-15-1-0272 TITLE: Low- Cost , High-Throughput 3-D Pulmonary Imager Using Hyperpolarized Contrast Agents and Low-Field MRI...STATEMENT: Approved for Public Release; Distribution Unlimited The views, opinions and/or findings contained in this report are those of the author(s

Organizing for low cost space operations - Status and plans

Science.gov (United States)

Lee, C.

1976-01-01

Design features of the Space Transportation System (vehicle reuse, low cost expendable components, simple payload interfaces, standard support systems) must be matched by economical operational methods to achieve low operating and payload costs. Users will be responsible for their own payloads and will be charged according to the services they require. Efficient use of manpower, simple documentation, simplified test, checkout, and flight planning are firm goals, together with flexibility for quick response to varying user needs. Status of the Shuttle hardware, plans for establishing low cost procedures, and the policy for user charges are discussed.

THE MARKETING MIX FOR LOW COST HEALTHCARE

OpenAIRE

Julie George; Dr. Manita D. Shah

2017-01-01

The Indian health care industry has a history of dealing with poor doctor-patient ratio, shortage of medical professionals, poor health infrastructure, and low expenditure on healthcare information technology; steep out of pocket spending (OOP), low health insurance coverage, inadequate government spending, poor access to health care facilities and social stigma related to diseases. The unique mindset and ability for frugality has successfully been applied in offering low cost healthcare of u...

Low-cost uncooled VOx infrared camera development

Science.gov (United States)

Li, Chuan; Han, C. J.; Skidmore, George D.; Cook, Grady; Kubala, Kenny; Bates, Robert; Temple, Dorota; Lannon, John; Hilton, Allan; Glukh, Konstantin; Hardy, Busbee

2013-06-01

The DRS Tamarisk® 320 camera, introduced in 2011, is a low cost commercial camera based on the 17 µm pixel pitch 320×240 VOx microbolometer technology. A higher resolution 17 µm pixel pitch 640×480 Tamarisk®640 has also been developed and is now in production serving the commercial markets. Recently, under the DARPA sponsored Low Cost Thermal Imager-Manufacturing (LCTI-M) program and internal project, DRS is leading a team of industrial experts from FiveFocal, RTI International and MEMSCAP to develop a small form factor uncooled infrared camera for the military and commercial markets. The objective of the DARPA LCTI-M program is to develop a low SWaP camera (costs less than US $500 based on a 10,000 units per month production rate. To meet this challenge, DRS is developing several innovative technologies including a small pixel pitch 640×512 VOx uncooled detector, an advanced digital ROIC and low power miniature camera electronics. In addition, DRS and its partners are developing innovative manufacturing processes to reduce production cycle time and costs including wafer scale optic and vacuum packaging manufacturing and a 3-dimensional integrated camera assembly. This paper provides an overview of the DRS Tamarisk® project and LCTI-M related uncooled technology development activities. Highlights of recent progress and challenges will also be discussed. It should be noted that BAE Systems and Raytheon Vision Systems are also participants of the DARPA LCTI-M program.

DENGUE DURING PREGNANCY: ASSOCIATION WITH LOW BIRTH WEIGHT AND PREMATURITY

Directory of Open Access Journals (Sweden)

Christiane Fernandes RIBEIRO

2016-01-01

Full Text Available The aim of this study was to evaluate the effects of dengue virus infection during pregnancy and its correlation with low birth weight, prematurity, and asphyxia. A non-concurrent cohort study reveals the association of dengue during pregnancy with prematurity and low birth weight, when birth occurred during the maternal-fetal viremia period (p = 0.016 and p < 0.0001, respectively.

Low birth weight: risk factors in irbid, jordan

International Nuclear Information System (INIS)

Tal, Y.S.A.; Bataineh, H.A.

2006-01-01

The aim of this study was to estimate the birth weight distribution and prevalence of low birth weights (LBW) in Irbid, Jordan, and to determine some of the contributing risk factors. A cross-sectional design was used to study women who delivered in Prince Rashed Hospital (PRH). Respondents were 2256 mothers ranging in age from 15-45 years. Anthropometric measurements and interviews were used to determine the risk factors. The birth weights and anthropometric measurements of all babies born alive in PRH during the period were collected. Post-delivery weight and other measurements of respondents were also collected. The mean birth weight of the newborns in the study was 2812 g. Twenty-two percent of the newborns weighed between 700 and 2499 g. About 39% of respondents had urinary tract infection while 29% suffered from anemia, and 10% had bleeding during pregnancy. All anthropometric measurements were significantly associated with LBW. Mothers who were younger in age at their first delivery, had low post-delivery weight, and bled during pregnancy, were more likely to have LBW babies. There is also a need to discourage early pregnancies and to encourage utilization of mother and child health services, and treat concomitant illnesses during pregnancy. (author)

Low cost design of microprocessor EDAC circuit

International Nuclear Information System (INIS)

Hao Li; Yu Lixin; Peng Heping; Zhuang Wei

2015-01-01

An optimization method of error detection and correction (EDAC) circuit design is proposed. The method involves selecting or constructing EDAC codes of low cost hardware, associated with operation scheduling implementation based on 2-input XOR gates structure, and two actions for reducing hardware cells, which can reduce the delay penalties and area costs of the EDAC circuit effectively. The 32-bit EDAC circuit hardware implementation is selected to make a prototype, based on the 180 nm process. The delay penalties and area costs of the EDAC circuit are evaluated. Results show that the time penalty and area cost of the EDAC circuitries are affected with different parity-check matrices and different hardware implementation for the EDAC codes with the same capability of correction and detection code. This method can be used as a guide for low-cost radiation-hardened microprocessor EDAC circuit design and for more advanced technologies. (paper)

Delayed Prenatal Care and the Risk of Low Birth Weight Delivery.

Science.gov (United States)

Hueston, William J.; Gilbert, Gregory E.; Davis, Lucy; Sturgill, Vanessa

2003-01-01

Assessed whether the timing of prenatal care related to low birth weight delivery, adjusting for sociodemographic and behavioral risk factors. Data on births to white and African American women showed no benefits for early initiation of prenatal care in reducing the risk of low birth weight.(SM)

Revenue Sufficiency and Reliability in a Zero Marginal Cost Future

Energy Technology Data Exchange (ETDEWEB)

Frew, Bethany A.

2017-04-17

Features of existing wholesale electricity markets, such as administrative pricing rules and policy-based reliability standards, can distort market incentives from allowing generators sufficient opportunities to recover both fixed and variable costs. Moreover, these challenges can be amplified by other factors, including (1) inelastic demand resulting from a lack of price signal clarity, (2) low- or near-zero marginal cost generation, particularly arising from low natural gas fuel prices and variable generation (VG), such as wind and solar, and (3) the variability and uncertainty of this VG. As power systems begin to incorporate higher shares of VG, many questions arise about the suitability of the existing marginal-cost-based price formation, primarily within an energy-only market structure, to ensure the economic viability of resources that might be needed to provide system reliability. This article discusses these questions and provides a summary of completed and ongoing modelling-based work at the National Renewable Energy Laboratory to better understand the impacts of evolving power systems on reliability and revenue sufficiency.

MOCA: A Low-Power, Low-Cost Motion Capture System Based on Integrated Accelerometers

Directory of Open Access Journals (Sweden)

Elisabetta Farella

2007-01-01

Full Text Available Human-computer interaction (HCI and virtual reality applications pose the challenge of enabling real-time interfaces for natural interaction. Gesture recognition based on body-mounted accelerometers has been proposed as a viable solution to translate patterns of movements that are associated with user commands, thus substituting point-and-click methods or other cumbersome input devices. On the other hand, cost and power constraints make the implementation of a natural and efficient interface suitable for consumer applications a critical task. Even though several gesture recognition solutions exist, their use in HCI context has been poorly characterized. For this reason, in this paper, we consider a low-cost/low-power wearable motion tracking system based on integrated accelerometers called motion capture with accelerometers (MOCA that we evaluated for navigation in virtual spaces. Recognition is based on a geometric algorithm that enables efficient and robust detection of rotational movements. Our objective is to demonstrate that such a low-cost and a low-power implementation is suitable for HCI applications. To this purpose, we characterized the system from both a quantitative point of view and a qualitative point of view. First, we performed static and dynamic assessment of movement recognition accuracy. Second, we evaluated the effectiveness of user experience using a 3D game application as a test bed.

Development of a low cost, low temperature cryocooler using the Gifford McMahon cycle

Science.gov (United States)

Ramanayaka, A.; Mani, R.

2008-03-01

Although Helium is the second most abundant element, its concentration in the earth's atmosphere is fairly low and constant, as the portion that escapes from the atmosphere is replace by new emission. Historically, Helium was extracted as a byproduct of natural gas production, and stored in gas fields in a National Helium Reserve, in an attempt to conserve this interesting element. National policy has changed and the cost of liquid Helium has increased rapidly in the recent past. These new circumstances have created new interest in alternative eco-friendly methods to realizing and maintaining low temperatures in the laboratory. There have been number of successful attempts at making low temperature closed cycle Helium refrigerators by modifying an existing closed cycle system, and usually the regenerator has been replaced in order to achieve the desired results. Here, we discus our attempt to fabricate a low cost, low temperature closed cycle Helium refrigerator starting from a 15K Gifford McMahon system. We reexamine the barriers to realizing lower temperature here and our attempts at overcoming them.

Low-cost thermo-electric infrared FPAs and their automotive applications

Science.gov (United States)

Hirota, Masaki; Ohta, Yoshimi; Fukuyama, Yasuhiro

2008-04-01

This paper describes three low-cost infrared focal plane arrays (FPAs) having a 1,536, 2,304, and 10,800 elements and experimental vehicle systems. They have a low-cost potential because each element consists of p-n polysilicon thermocouples, which allows the use of low-cost ultra-fine microfabrication technology commonly employed in the conventional semiconductor manufacturing processes. To increase the responsivity of FPA, we have developed a precisely patterned Au-black absorber that has high infrared absorptivity of more than 90%. The FPA having a 2,304 elements achieved high resposivity of 4,300 V/W. In order to reduce package cost, we developed a vacuum-sealed package integrated with a molded ZnS lens. The camera aiming the temperature measurement of a passenger cabin is compact and light weight devices that measures 45 x 45 x 30 mm and weighs 190 g. The camera achieves a noise equivalent temperature deviation (NETD) of less than 0.7°C from 0 to 40°C. In this paper, we also present a several experimental systems that use infrared cameras. One experimental system is a blind spot pedestrian warning system that employs four infrared cameras. It can detect the infrared radiation emitted from a human body and alerts the driver when a pedestrian is in a blind spot. The system can also prevent the vehicle from moving in the direction of the pedestrian. Another system uses a visible-light camera and infrared sensors to detect the presence of a pedestrian in a rear blind spot and alerts the driver. The third system is a new type of human-machine interface system that enables the driver to control the car's audio system without letting go of the steering wheel. Uncooled infrared cameras are still costly, which limits their automotive use to high-end luxury cars at present. To promote widespread use of IR imaging sensors on vehicles, we need to reduce their cost further.

Tailoring of the Nanotexture of Mesoporous Silica Films and their Functionalized Derivatives for Selectively Harvesting Low Molecular Weight Protein

Science.gov (United States)

Hu, Ye; Bouamrani, Ali; Tasciotti, Ennio; Li, Li; Liu, Xuewu; Ferrari, Mauro

2010-01-01

We present a fast, efficient and reliable system based on mesoporous silica chips to specifically fractionate and enrich the low molecular weight proteome. Mesoporous silica thin films with tunable features at the nanoscale were fabricated using the triblock copolymer template pathway. Using different templates and concentrations in the precursor solution, various pore size distributions, pore structures and connectivity were obtained and applied for selective recovery of low mass proteins. In combination with mass spectrometry and statistic analysis, we demonstrated the correlation between the nanophase characteristics of the mesoporous silica thin films and the specificity and efficacy of low mass proteome harvesting. In addition, to overcome the limitations of the pre-functionalization method in polymer selection, plasma ashing was used for the first time for the treatment of the mesoporous silica surface prior to chemical modification. Surface charge modifications by different functional groups resulted in a selective capture of the low molecular weight proteins from serum sample. In conclusion our study demonstrates that the ability to tune the physico-chemical properties of mesoporous silica surfaces, for a selective enrichment of the low molecular weight proteome from complex biological fluids, has the potential to promote proteomic biomarker discovery. PMID:20014864

Low molecular weight protein enrichment on mesoporous silica thin films for biomarker discovery.

Science.gov (United States)

Fan, Jia; Gallagher, James W; Wu, Hung-Jen; Landry, Matthew G; Sakamoto, Jason; Ferrari, Mauro; Hu, Ye

2012-04-17

The identification of circulating biomarkers holds great potential for non invasive approaches in early diagnosis and prognosis, as well as for the monitoring of therapeutic efficiency.(1-3) The circulating low molecular weight proteome (LMWP) composed of small proteins shed from tissues and cells or peptide fragments derived from the proteolytic degradation of larger proteins, has been associated with the pathological condition in patients and likely reflects the state of disease.(4,5) Despite these potential clinical applications, the use of Mass Spectrometry (MS) to profile the LMWP from biological fluids has proven to be very challenging due to the large dynamic range of protein and peptide concentrations in serum.(6) Without sample pre-treatment, some of the more highly abundant proteins obscure the detection of low-abundance species in serum/plasma. Current proteomic-based approaches, such as two-dimensional polyacrylamide gel-electrophoresis (2D-PAGE) and shotgun proteomics methods are labor-intensive, low throughput and offer limited suitability for clinical applications.(7-9) Therefore, a more effective strategy is needed to isolate LMWP from blood and allow the high throughput screening of clinical samples. Here, we present a fast, efficient and reliable multi-fractionation system based on mesoporous silica chips to specifically target and enrich LMWP.(10,11) Mesoporous silica (MPS) thin films with tunable features at the nanoscale were fabricated using the triblock copolymer template pathway. Using different polymer templates and polymer concentrations in the precursor solution, various pore size distributions, pore structures, connectivity and surface properties were determined and applied for selective recovery of low mass proteins. The selective parsing of the enriched peptides into different subclasses according to their physicochemical properties will enhance the efficiency of recovery and detection of low abundance species. In combination with mass

Optical incremental rotary encoder in low-cost-design; Optischer inkrementaler Drehgeber in Low-Cost-Bauweise

Energy Technology Data Exchange (ETDEWEB)

Hopp, David; Pruss, Christof; Osten, Wolfgang [Stuttgart Univ. (Germany). Inst. fuer Technische Optik; Seybold, Jonathan; Mayer, Volker [Hans-Schickard-Gesellschaft, Stuttgart (DE). Inst. fuer Mikroaufbautechnik (IMAT); Kueck, Heinz [Hans-Schickard-Gesellschaft, Stuttgart (DE). Inst. fuer Mikroaufbautechnik (IMAT); Stuttgart Univ. (Germany). Inst. fuer Zeitmesstechnik, Fein- und Mikrotechnik

2010-07-01

We have developed a new concept for low-cost optical encoders to come up to meet the increasing demand for inexpensive rotary sensors. The principal idea is to use a micro patterned plastic disc with metal coating, as it is used for Compact Discs or DVDs. Such encoder discs can be manufactured by an efficient injection compression moulding process. With this well established technique it is possible to achieve highly precise micro patterns while running a cost effective process for high volume production. (orig.)

A 3D paper-based enzymatic fuel cell for self-powered, low-cost glucose monitoring.

Science.gov (United States)

Fischer, Christopher; Fraiwan, Arwa; Choi, Seokheun

2016-05-15

In this work, we demonstrate a novel low-cost, self-powered paper-based biosensor for glucose monitoring. The device operating mechanism is based on a glucose/oxygen enzymatic fuel cell using an electrochemical energy conversion as a transducing element for glucose monitoring. The self-powered glucose biosensor features (i) a 3D origami paper-based structure for easy system integration onto paper, (ii) an air-cathode on paper for low-cost production and easy operation, and (iii) a screen printed chitosan/glucose oxidase anode for stable current generation as an analytical signal for glucose monitoring. The sensor showed a linear range of output current at 1-5mM glucose (R(2)=0.996) with a sensitivity of 0.02 µA mM(-1). The advantages offered by such a device, including a low cost, lack of external power sources/sophisticated external transducers, and the capacity to rapidly generate reliable results, are well suited for the clinical and social settings of the developing world. Copyright © 2015 Elsevier B.V. All rights reserved.

A Low Cost Inflatable CubeSat Drag Brake Utilizing Sublimation

Science.gov (United States)

Horn, Adam Charles

The United Nations Inter-Agency Debris Coordination Committee has adopted a 25-year post-mission lifetime requirement for any satellite orbiting below 2000 km in order to mitigate the growing orbital debris threat. Low-cost CubeSats have become important satellite platforms with startling capabilities, but this guideline restricts them to altitudes below 600 km because they remain in orbit too long. In order to enable CubeSat deployments at higher release altitudes, a low-cost, ultra-reliable deorbit device is needed. This thesis reports on efforts to develop a deployable and passively inflatable drag brake that can deorbit from higher orbital altitudes, thereby complying with the 25-year orbital lifetime guideline. On the basis of concepts first implemented during the NASA Echo Satellite Project, this study investigated the design of an inflatable CubeSat drag device that utilizes sublimating benzoic acid powder as the inflation propellant. Testing has focused on demonstrating the functionality of charging a Mylar drag brake bladder with appropriate quantities of benzoic acid powder, and the exposure to a controlled-temperature vacuum chamber causing the bladder to inflate. Although results show a measureable increase in internal pressure when introduced to anticipated orbital temperatures, a significant air-derived expansion prior to sublimation was encountered due to the undetectable volume of ambient residual air in the fabricated membrane bladders. These tests have demonstrated the feasibility of this approach, thereby demonstrating that this concept can create a potentially smaller and less expensive drag device, eliminating inflation gas tanks and valves. In that way, this system can provide a low-cost, miniaturized system that reduces a CubeSat's orbital lifetime to less than 25 years, when placed at higher orbital altitude.

A low-cost high-performance embedded platform for accelerator controls

International Nuclear Information System (INIS)

Cleva, Stefano; Bogani, Alessio Igor; Pivetta, Lorenzo

2012-01-01

Over the last years the mobile and hand-held device market has seen a dramatic performance improvement of the microprocessors employed for these systems. As an interesting side effect, this brings the opportunity of adopting these microprocessors to build small low-cost embedded boards, featuring lots of processing power and input/output capabilities. Moreover, being capable of running a full featured operating system such as Gnu/Linux, and even a control system toolkit such as Tango, these boards can also be used in control systems as front-end or embedded computers. In order to evaluate the feasibility of this idea, an activity has started at Elettra to select, evaluate and validate a commercial embedded device able to guarantee production grade reliability, competitive costs and an open source platform. The preliminary results of this work are presented. (author)

Low-cost optical interconnect module for parallel optical data links

Science.gov (United States)

Noddings, Chad; Hirsch, Tom J.; Olla, M.; Spooner, C.; Yu, Jason J.

1995-04-01

We have designed, fabricated, and tested a prototype parallel ten-channel unidirectional optical data link. When scaled to production, we project that this technology will satisfy the following market penetration requirements: (1) up to 70 meters transmission distance, (2) at least 1 gigabyte/second data rate, and (3) 0.35 to 0.50 MByte/second volume selling price. These goals can be achieved by means of the assembly innovations described in this paper: a novel alignment method that is integrated with low-cost, few chip module packaging techniques, yielding high coupling and reducing the component count. Furthermore, high coupling efficiency increases projected reliability reducing the driver's power requirements.

Low plasma adiponectin concentrations do not predict weight gain in humans

DEFF Research Database (Denmark)

Vozarova, Barbora; Stefan, Norbert; Lindsay, Robert S

2002-01-01

Low concentrations of plasma adiponectin, the most abundant adipose-specific protein, are observed in obese individuals and predict the development of type 2 diabetes. Administration of adiponectin to rodents prevented diet-induced weight gain, suggesting a potential etiologic role of hypoadipone......Low concentrations of plasma adiponectin, the most abundant adipose-specific protein, are observed in obese individuals and predict the development of type 2 diabetes. Administration of adiponectin to rodents prevented diet-induced weight gain, suggesting a potential etiologic role...... of hypoadiponectinemia in the development of obesity. Our aim was to prospectively examine whether low plasma adiponectin concentrations predict future weight gain in Pima Indians, explaining the predictive effect of adiponectin on the development of type 2 diabetes. We measured plasma adiponectin concentrations in 219...... nondiabetic Pima Indians (112 M/107 F, age 31 +/- 9 years, body weight 96 +/- 20 kg [mean +/- SD]) in whom body weight and height were measured and BMI calculated at baseline and follow-up. Cross-sectionally, plasma adiponectin concentrations were negatively associated with body weight (r = -0.28, P = 0...

Low Cost Processing of Commingled Thermoplastic Composites

Science.gov (United States)

Chiasson, Matthew Lee

A low cost vacuum consolidation process has been investigated for use with commingled thermoplastic matrix composites. In particular, the vacuum consolidation behaviour of commingled polypropylene/glass fibre and commingled nylon/carbon fibre precursors were studied. Laminates were consolidated in a convection oven under vacuum pressure. During processing, the consolidation of the laminate packs was measured by use of non-contact eddy current sensors. The consolidation curves are then used to tune an empirical consolidation model. The overall quality of the resulting laminates is also discussed. Dynamic mechanical analysis, differential scanning calorimetry and mechanical tensile testing were also performed in order to determine the effects of varying processing parameters on the physical and mechanical properties of the laminates. Through this analysis, it was determined that the nylon/carbon fibre blend was not suitable for vacuum consolidation, while the polypropylene/glass fibre blend is a viable option for vacuum consolidation. The ultimate goal of this work is to provide a foundation from which low cost unmanned aerial vehicle (UAV) components can be designed and manufactured from thermoplastic matrix composites using a low cost processing technique as an alternative to traditional thermoset composite materials.

Low-cost safety enhancements for stop-controlled and signalized intersections

Science.gov (United States)

2009-05-01

The purpose of this document is to present information on suggested effective, low-cost intersection countermeasures developed using intersection safety research results and input from an intersection safety expert panel. These low-cost countermeasur...

Risk Factors for Neonatal Mortality Among Very Low Birth Weight Neonates

Directory of Open Access Journals (Sweden)

Fatemeh Nayeri

2013-05-01

Full Text Available The objective of this study is to determine risk factors causing increase in very low birth way (VLBW neonatal mortality. The medical files of all neonates weighing ≤1500 g, born in Vali-e-Asr hospital (2001-2004 were studied. Two groups of neonates (living and dead were compared up to the time of hospital discharge or death. A total of 317 neonates were enrolled. A meaningful relationship existed between occurrence of death and low gestational age (P=0.02, low birth weight, lower than 1000 g (P=0.001, Apgar score <6 at 5th minutes (P=0.001, resuscitation at birth (P=0.001, respiratory distress syndrome (P=0.001 need for mechanical ventilation (P=0.001, neurological complications (P=0.001 and intraventricular hemorrhage (P=0.001. Regression analysis indicated that each 250 g weight increase up to 1250 g had protective effect, and reduced mortality rate. The causes of death of those neonates weighting over 1250 g should be sought in factors other than weight. Survival rate was calculated to be 80.4% for neonates weighing more than 1000 g. The most important high risk factors affecting mortality of neonates are: low birth weight, need for resuscitation at birth, need for ventilator use and intraventricular hemorrhage.

Factors associated with choice of a low-fat or low-carbohydrate diet during a behavioral weight loss intervention☆, ☆☆

Science.gov (United States)

McVay, Megan A.; Voils, Corrine I.; Coffman, Cynthia J.; Geiselman, Paula J.; Kolotkin, Ronette L.; Mayer, Stephanie B.; Smith, Valerie A.; Gaillard, Leslie; Turner, Marsha J.; Yancy, William S.

2016-01-01

Individuals undertaking a weight loss effort have a choice among proven dietary approaches. Factors contributing to choice of either a low-fat/low-calorie diet or a low-carbohydrate diet, two of the most studied and popular dietary approaches, are unknown. The current study used data from participants randomized to the ‘choice’ arm of a trial examining whether being able to choose a diet regimen yields higher weight loss than being randomly assigned to a diet. At study entry, participants attended a group session during which they were provided tailored feedback indicating which diet was most consistent with their food preferences using the Geiselman Food Preference Questionnaire (FPQ), information about both diets, and example meals for each diet. One week later, they indicated which diet they chose to follow during the 48-week study, with the option of switching diets after 12 weeks. Of 105 choice arm participants, 44 (42%) chose the low-fat/low-calorie diet and 61 (58%) chose the low-carbohydrate diet. In bivariate analyses, diet choice was not associated with age, race, sex, education, BMI, or diabetes (all p > 0.05). Low-carbohydrate diet choice was associated with baseline higher percent fat intake (p = 0.007), lower percent carbohydrate intake (p = 0.02), and food preferences consistent with a low-carbohydrate diet according to FPQ (p diet preference was associated with diet choice (p = 0.001). Reported reasons for diet choice were generally similar for those choosing either diet; however, concerns about negative health effects of the unselected diet was rated as more influential among participants selecting the low-fat diet. Only three low-carbohydrate and two low-fat diet participants switched diets at 12 weeks. Results suggest that when provided a choice between two popular weight loss dietary approaches, an individual's selection is likely influenced by baseline dietary intake pattern, and especially by his or her dietary preferences. Research is

Children with low birth weight and low gestational age in Oslo, Norway: immigration is not the cause of increasing proportions.

OpenAIRE

Stoltenberg, C; Magnus, P

1995-01-01

STUDY OBJECTIVE--To determine the influence of children born to immigrant mothers on the total proportions of low birth weight and preterm deliveries in Oslo and to explain the increases in the proportions of children with low birth weight and low gestational age since 1980-1982. DESIGN--This was a cross sectional study based on Norwegian Medical Birth Registry data and information on mothers' country of birth from the Central Bureau of Statistics. SETTING--Oslo, Norway 1968-91. POPULATION--A...

Perceptions of low-income African-American mothers about excessive gestational weight gain.

Science.gov (United States)

Herring, Sharon J; Henry, Tasmia Q; Klotz, Alicia A; Foster, Gary D; Whitaker, Robert C

2012-12-01

A rising number of low-income African-American mothers gain more weight in pregnancy than is recommended, placing them at risk for poor maternal and fetal health outcomes. Little is known about the perceptions of mothers in this population that may influence excessive gestational weight gain. In 2010-2011, we conducted 4 focus groups with 31 low-income, pregnant African-Americans in Philadelphia. Two readers independently coded the focus group transcripts to identify recurrent themes. We identified 9 themes around perceptions that encouraged or discouraged high gestational weight gain. Mothers attributed high weight gain to eating more in pregnancy, which was the result of being hungrier and the belief that consuming more calories while pregnant was essential for babies' health. Family members, especially participants own mothers, strongly reinforced the need to "eat for two" to make a healthy baby. Mothers and their families recognized the link between poor fetal outcomes and low weight gains but not higher gains, and thus, most had a greater pre-occupation with too little food intake and weight gain rather than too much. Having physical symptoms from overeating and weight retention after previous pregnancies were factors that discouraged higher gains. Overall, low-income African-American mothers had more perceptions encouraging high gestational weight gain than discouraging it. Interventions to prevent excessive weight gain need to be sensitive to these perceptions. Messages that link guideline recommended weight gain to optimal infant outcomes and mothers' physical symptoms may be most effective for weight control.

Efficacy of Low-Cost PC-Based Aviation Training Devices

Directory of Open Access Journals (Sweden)

Savern l Reweti

2017-03-01

Full Text Available Aim/Purpose: The aim of this study was to explore whether a full cost flight training device (FTD was significantly better for simulator training than a low cost PC-Based Aviation Training Device (PCATD. Background: A quasi-transfer study was undertaken to ascertain whether a Civil Aviation Authority certified Flight Training Device (FTD was more effective at improving pilot proficiency in the performance of a standard VFR traffic pattern (Overhead Rejoin Procedure than a customised low cost PCATD. Methodology: In this quasi-transfer study, a high fidelity FTD rather than an aircraft was used to test both training and transfer tasks. Ninety-three pilots were recruited to participate in the study. Contribution: The use of PCATDs is now well established for pilot training, especially for Instrument Flight Rules (IFR skills training. However, little substantive research has been undertaken to examine their efficacy for VFR training. Findings: There was no evidence of a pre-test/post-test difference in VFR task perfor-mance between participants trained on the PCATD and the FTD, when post tested on the FTD. The use of both PCATD and FTD demonstrated signifi-cant improvements in VFR task performance compared to a control group that received no PCATD or FTD training. Recommendations for Practitioners\t: We discuss the possibility that low cost PCATDs may be a viable alternative for flight schools wishing to use a flight simulator but not able to afford a FTD. Recommendation for Researchers: We discuss the introduction of improved low cost technologies that allow PCATDs to be used more effectively for training in VFR procedures. The development and testing of new technologies requires more research. Impact on Society: Flight training schools operate in a difficult economic environment with continued increases in the cost of aircraft maintenance, compliance costs, and aviation fuel. The increased utilisation of low cost PCATD’s especially for VFR

NEONATAL SEPTICAEMIA IN LOW BIRTH WEIGHT INFANTS AT ...

African Journals Online (AJOL)

2005-03-03

Mar 3, 2005 ... Conclusion: Case fatality rate for low birth weight infants with sepsis is high. Gram negative organisms ... streptococci was found while there was no candida sepsis. Early onset ..... puerperal sepsis study group. Central Afr. J.

Revenue Sufficiency and Reliability in a Zero Marginal Cost Future: Preprint

Energy Technology Data Exchange (ETDEWEB)

Frew, Bethany A.; Milligan, Michael; Brinkman, Greg; Bloom, Aaron; Clark, Kara; Denholm, Paul

2016-12-01

Features of existing wholesale electricity markets, such as administrative pricing rules and policy-based reliability standards, can distort market incentives from allowing generators sufficient opportunities to recover both fixed and variable costs. Moreover, these challenges can be amplified by other factors, including (1) inelastic demand resulting from a lack of price signal clarity, (2) low- or near-zero marginal cost generation, particularly arising from low natural gas fuel prices and variable generation (VG), such as wind and solar, and (3) the variability and uncertainty of this VG. As power systems begin to incorporate higher shares of VG, many questions arise about the suitability of the existing marginal-cost-based price formation, primarily within an energy-only market structure, to ensure the economic viability of resources that might be needed to provide system reliability. This article discusses these questions and provides a summary of completed and ongoing modelling-based work at the National Renewable Energy Laboratory to better understand the impacts of evolving power systems on reliability and revenue sufficiency.

Low-molecular-weight chitosans: Preparation and characterization

Czech Academy of Sciences Publication Activity Database

Tishchenko, Galina; Šimůnek, Jiří; Brus, Jiří; Netopilík, Miloš; Pekárek, Michal; Walterová, Zuzana; Koppová, Ingrid; Lenfeld, Jiří

2011-01-01

Roč. 86, č. 2 (2011), s. 1077-1081 ISSN 0144-8617 R&D Projects: GA ČR(CZ) GA525/08/0803 Institutional research plan: CEZ:AV0Z40500505; CEZ:AV0Z50450515 Keywords : low-molecular-weight chitosans * chitooligosaccharides * oxidative depolymerization Subject RIV: ED - Physiology Impact factor: 3.628, year: 2011

Maintenance of the Photovolatic Plants Using UAV Equipped with Low-cost GNSS RTK Receiver

DEFF Research Database (Denmark)

Bilal, Muhammad; Prasad, Ramjee; Nisi, Marco

2017-01-01

of low-cost GNSS RTK receiver, is the maintenance of photovoltaic (PV) plants using Unmanned Aerial Vehicle (UAV). This paper proposes a solution that aims at automating the maintenance of PV plant with enhanced reliability in a time and cost effective manner, which otherwise requires intermediate human...... intervention. The paper presents the architectural concept, system design, and end-to-end algorithm that plays a pivotal role in enabling the automatic report generation of PV plant status. Preliminary results of the proof-of-concept shows the feasibility of the proposed solution....

Reliability of BOD POD Measurements Remains High After a Short-Duration Low-Carbohydrate Diet.

Science.gov (United States)

Greer, Beau Kjerulf; Edsall, Kathleen M; Greer, Anna E

2016-04-01

The purpose of the current study was to determine whether expected changes in body weight via a 3-day low-carbohydrate (LC) diet will disrupt the reliability of air displacement plethysmography measurements via BOD POD. Twenty-four subjects recorded their typical diets for 3 days before BOD POD and 7-site skinfold analyses. Subjects were matched for lean body mass and divided into low-CHO (LC) and control (CON) groups. The LC group was given instruction intended to prevent more than 50 grams/day of carbohydrate consumption for 3 consecutive days, and the CON group replicated their previously recorded diet. Body composition measurements were repeated after dietary intervention. Test-retest reliability measures were significant (p fat percentage in both the LC and the CON groups (rs = .993 and .965, respectively). Likewise, skinfold analysis for body fat percentage reliability was high in both groups (rs = .996 and .997, respectively). There were significant differences between 1st and 2nd BOD POD measurements for body mass (72.9 ± 13.3 vs. 72.1 ± 13.0 kg [M ± SD]) and body volume (69.0 ± 12.7-68.1 ± 12.2 L) in the LC group (p .05) in BOD POD-determined body fat percentage, lean body mass, or fat mass between the 1st and 2nd trial in either group. Body composition measures via BOD POD and 7-site skinfolds remain reliable after 3 days of an LC diet despite significant decreases in body mass.

Marine Hydrokinetic Turbine Power-Take-Off Design for Optimal Performance and Low Impact on Cost-of-Energy: Preprint

Energy Technology Data Exchange (ETDEWEB)

Beam, M.; Kline, B.; Elbing, B.; Straka, W.; Fontaine, A.; Lawson, M.; Li, Y.; Thresher, R.; Previsic, M.

2013-02-01

Marine hydrokinetic devices are becoming a popular method for generating marine renewable energy worldwide. These devices generate electricity by converting the kinetic energy of moving water, wave motion or currents, into electrical energy through the use of a power-take-off (PTO) system. Most PTO systems incorporate a mechanical or hydraulic drivetrain, power generator, and electric control/conditioning system to deliver the generated electric power to the grid at the required state. Like wind turbine applications, the PTO system must be designed for high reliability, good efficiency, and long service life with reasonable maintenance requirements, low cost, and an appropriate mechanical design for anticipated applied steady and unsteady loads. The ultimate goal of a PTO design is high efficiency and low maintenance and cost, with a low impact on the device cost-of-energy (CoE).

Marine Hydrokinetic Turbine Power-Take-Off Design for Optimal Performance and Low Impact on Cost-of-Energy: Preprint

Energy Technology Data Exchange (ETDEWEB)

Beam, M.; Kline, B.; Elbing, B.; Straka, W.; Fontaine, A.; Lawson, M.; Li, Y.; Thresher, R.; Previsic, M.

2012-04-01

Marine hydrokinetic devices are becoming a popular method for generating marine renewable energy worldwide. These devices generate electricity by converting the kinetic energy of moving water, wave motion or currents, into electrical energy through the use of a Power-Take-Off (PTO) system. Most PTO systems incorporate a mechanical or hydraulic drive train, power generator and electric control/conditioning system to deliver the generated electric power to the grid at the required state. Like wind turbine applications, the PTO system must be designed for high reliability, good efficiency, and long service life with reasonable maintenance requirements, low cost and an appropriate mechanical design for anticipated applied steady and unsteady loads. The ultimate goal of a PTO design is high efficiency, low maintenance and cost with a low impact on the device Cost-of-Energy (CoE).

Trends in incidence of low birth weight deliveries in a tertiary hospital, in Northern Nigeria

OpenAIRE

O Hassan; Z Muhammad

2011-01-01

Background: Low birth weight is an important determinant of both infant and neonatal mortality rates and is also an indicator of social and economic development. The World Health Organization described any baby with birth weight of less than 2.5kg as low birth weight baby. Objective: To determine the incidence of low birth weight deliveries in Aminu Kano Teaching Hospital, Kano. Study design: A retrospective descriptive study. Results: The overall incidence of low birth weight delive...

Printable low-cost sensor systems for healthcare smart textiles

Science.gov (United States)

Rai, Pratyush; Kumar, Prashanth S.; Oh, Sechang; Kwon, Hyeokjun; Mathur, Gyanesh N.; Varadan, Vijay K.

2011-04-01

Smart textiles-based wearable health monitoring systems (ST-HMS) have been presented as elegant solutions to the requirements of individuals across a wide range of ages. They can be used to monitor young or elderly recuperating /convalescent patients either in hospital or at home, or they can be used by young athletes to monitor important physiological parameters to better design their training or fitness program. Business and academic interests, all over the world, have fueled a great deal of work in the development of this technology since 1990. However, two important impediments to the development of ST-HMS are:-integration of flexible electrodes, flexible sensors, signal conditioning circuits and data logging or wireless transmission devices into a seamless garment and a means to mass manufacture the same, while keeping the costs low. Roll-to-roll printing and screen printing are two low cost methods for large scale manufacturing on flexible substrates and can be extended to textiles as well. These two methods are, currently, best suited for planar structures. The sensors, integrated with wireless telemetry, facilitate development of a ST-HMS that allows for unobtrusive health monitoring. In this paper, we present our results with planar screen printable sensors based on conductive inks which can be used to monitor EKG, abdominal respiration effort, blood pressure, pulse rate and body temperature. The sensor systems were calibrated, and tested for sensitivity, reliability and robustness to ensure reuse after washing cycles.

Low cost thermal solar collector

International Nuclear Information System (INIS)

Abugderah, M. M.; Schneider, E. L.; Tontini, M. V.

2006-01-01

Solar energy is a good alternative in the economy of the electric energy mainly for the water heating. However, the solar heaters used demand a high initial investment, becoming the warm water from solar energy inaccessible to a large part of the society. Thus, a low cost solar heater was developed, constructed and tested in the chemical engineering department of West Parana State University-Unioeste. This equipment consists of 300 cans, divided in 30 columns of 10 cans each, all painted in black to enhance the obsorption of the solar radiation. The columns are connected to a pipe of pvc of 8 liters with 0.085m of external diameter. The equipment is capable to heat 120 liters of water in temperatures around 60 degree centigrade. The heater is insolated in its inferior part with cardboard and aluminum, covered with a transparent plastic in its superior. The system still counts with a insulated thermal reservoir, which can conserve the water in temperatures adjusted for the night non-solar days domestic use. The advantage of the constructed is it low cost material. The results are given an graphical tabular from showing acceptable efficiencies.(Autho

Low cost nuclear data printer

International Nuclear Information System (INIS)

Punnachiya, S.; Aungkultewaraksa, S.; Pengphol, S.

1988-01-01

The data printer is essential for nuclear radiation measuring system. A low cost nuclear data printer is developed from an electronic printing calculator. It can transfer the counting data from scaler and printout. The basic concept is that the BCD data is transferred and converted to decimal data sequentially by the interfacing circuit. After the counting time is ended, each digit is transferred to the printing calculator by data bus, digit by digit, until all the data are transferred and printed out. The low cost nuclear data printer consists of a CASIO model HR-8 electronic printing calculator and a printer interface model either NT 2602 or NT 2603 which are designed for printing out 6 digit data from the counter/timer CANBERRA model 1772. In this research the NT 2602 interface is designed only to transfer and printing out data. While the NT 2603 interface is designed to transfer, print out and average data. The NT 2603 can average from 2 to 9 sets of counting data. This data interfacing technique can be applied to work with all scientific instruments having readout as digital display and all kinds of electronic printing calculator

Periventricular-intraventricular haemorrhage in low-birth-weight ...

African Journals Online (AJOL)

The prevalence of periventricular-intraventricular haemorrhage (PV-IVH) aInong very-low-birthweight infants at Baragwanath Hospital has not been well docwnented. In this prospective study, a total of 282 live-born infants with birth weights of 1 000 - 1 749 g were studied over a 41/2-month period. Every infant had at least ...

A Low-Cost Data Acquisition System for Automobile Dynamics Applications

Science.gov (United States)

González, Alejandro; Vinolas, Jordi

2018-01-01

This project addresses the need for the implementation of low-cost acquisition technology in the field of vehicle engineering: the design, development, manufacture, and verification of a low-cost Arduino-based data acquisition platform to be used in project costs to be reduced and thus facilitating access to this kind of research that requires limited resources. PMID:29382039

Black/white differences in very low birth weight neonatal mortality rates among New York City hospitals.

Science.gov (United States)

Howell, Elizabeth A; Hebert, Paul; Chatterjee, Samprit; Kleinman, Lawrence C; Chassin, Mark R

2008-03-01

We sought to determine whether differences in the hospitals at which black and white infants are born contribute to black/white disparities in very low birth weight neonatal mortality rates in New York City. We performed a population-based cohort study using New York City vital statistics records on all live births and deaths of infants weighing 500 to 1499 g who were born in 45 hospitals between January 1, 1996, and December 31, 2001 (N = 11 781). We measured very low birth weight risk-adjusted neonatal mortality rates for each New York City hospital and assessed differences in the distributions of non-Hispanic black and non-Hispanic white very low birth weight births among these hospitals. Risk-adjusted neonatal mortality rates for very low birth weight infants in New York City hospitals ranged from 9.6 to 27.2 deaths per 1000 births. White very low birth weight infants were more likely to be born in the lowest mortality tertile of hospitals (49%), compared with black very low birth weight infants (29%). We estimated that, if black women delivered in the same hospitals as white women, then black very low birth weight mortality rates would be reduced by 6.7 deaths per 1000 very low birth weight births, removing 34.5% of the black/white disparity in very low birth weight neonatal mortality rates in New York City. Volume of very low birth weight deliveries was modestly associated with very low birth weight mortality rates but explained little of the racial disparity. Black very low birth weight infants more likely to be born in New York City hospitals with higher risk-adjusted neonatal mortality rates than were very low birth weight infants, contributing substantially to black-white disparities.

Development of low weight self-levelling mortars

International Nuclear Information System (INIS)

Padilla, A; Panama, I; Toledo, A; Flores, A

2015-01-01

This work shows the development of self levelling mortars, using micro bubbles based on aluminium silicate with a density of 0.25 g/cm 3 . Mortars formulations are composed by 8 different components in order to achieve properties balance between fresh and solid state. The mean objective is development light weight mortars with high fluidity and compression strength using micro bubbles and some additives. Formulations were designed employing Taguchi DOE of 8 variables and 3 states. Result analysis according to Taguchi method lets indentify the preponderant effect of each variable on the cited properties. Several formulations reached fluidity higher than 250%, with compression strength around 100 kg/cm 2 and a low volumetric weigh. Obtained volumetric weights are 20% less than commercial self levelling mortars weight. Finally some relations are presented such: as relation water/cement with fluidity, and micro bubble content versus mortars volumetric weight, and finally compression strength versus the volumetric weight of mortars

VEHIOT: Design and Evaluation of an IoT Architecture Based on Low-Cost Devices to Be Embedded in Production Vehicles.

Science.gov (United States)

Redondo, Jonatan Pajares; González, Lisardo Prieto; Guzman, Javier García; Boada, Beatriz L; Díaz, Vicente

2018-02-06

Nowadays, the current vehicles are incorporating control systems in order to improve their stability and handling. These control systems need to know the vehicle dynamics through the variables (lateral acceleration, roll rate, roll angle, sideslip angle, etc.) that are obtained or estimated from sensors. For this goal, it is necessary to mount on vehicles not only low-cost sensors, but also low-cost embedded systems, which allow acquiring data from sensors and executing the developed algorithms to estimate and to control with novel higher speed computing. All these devices have to be integrated in an adequate architecture with enough performance in terms of accuracy, reliability and processing time. In this article, an architecture to carry out the estimation and control of vehicle dynamics has been developed. This architecture was designed considering the basic principles of IoT and integrates low-cost sensors and embedded hardware for orchestrating the experiments. A comparison of two different low-cost systems in terms of accuracy, acquisition time and reliability has been done. Both devices have been compared with the VBOX device from Racelogic, which has been used as the ground truth. The comparison has been made from tests carried out in a real vehicle. The lateral acceleration and roll rate have been analyzed in order to quantify the error of these devices.

VEHIOT: Design and Evaluation of an IoT Architecture Based on Low-Cost Devices to Be Embedded in Production Vehicles

Science.gov (United States)

Díaz, Vicente

2018-01-01

Nowadays, the current vehicles are incorporating control systems in order to improve their stability and handling. These control systems need to know the vehicle dynamics through the variables (lateral acceleration, roll rate, roll angle, sideslip angle, etc.) that are obtained or estimated from sensors. For this goal, it is necessary to mount on vehicles not only low-cost sensors, but also low-cost embedded systems, which allow acquiring data from sensors and executing the developed algorithms to estimate and to control with novel higher speed computing. All these devices have to be integrated in an adequate architecture with enough performance in terms of accuracy, reliability and processing time. In this article, an architecture to carry out the estimation and control of vehicle dynamics has been developed. This architecture was designed considering the basic principles of IoT and integrates low-cost sensors and embedded hardware for orchestrating the experiments. A comparison of two different low-cost systems in terms of accuracy, acquisition time and reliability has been done. Both devices have been compared with the VBOX device from Racelogic, which has been used as the ground truth. The comparison has been made from tests carried out in a real vehicle. The lateral acceleration and roll rate have been analyzed in order to quantify the error of these devices. PMID:29415507

VEHIOT: Design and Evaluation of an IoT Architecture Based on Low-Cost Devices to Be Embedded in Production Vehicles

Directory of Open Access Journals (Sweden)

Jonatan Pajares Redondo

2018-02-01

Full Text Available Nowadays, the current vehicles are incorporating control systems in order to improve their stability and handling. These control systems need to know the vehicle dynamics through the variables (lateral acceleration, roll rate, roll angle, sideslip angle, etc. that are obtained or estimated from sensors. For this goal, it is necessary to mount on vehicles not only low-cost sensors, but also low-cost embedded systems, which allow acquiring data from sensors and executing the developed algorithms to estimate and to control with novel higher speed computing. All these devices have to be integrated in an adequate architecture with enough performance in terms of accuracy, reliability and processing time. In this article, an architecture to carry out the estimation and control of vehicle dynamics has been developed. This architecture was designed considering the basic principles of IoT and integrates low-cost sensors and embedded hardware for orchestrating the experiments. A comparison of two different low-cost systems in terms of accuracy, acquisition time and reliability has been done. Both devices have been compared with the VBOX device from Racelogic, which has been used as the ground truth. The comparison has been made from tests carried out in a real vehicle. The lateral acceleration and roll rate have been analyzed in order to quantify the error of these devices.

Qualitative performance and economic analysis of low cost solar fish driers in Sub-Saharan Africa

Directory of Open Access Journals (Sweden)

Moshood Keke Mustapha

2014-04-01

Full Text Available Qualitative performance and economic analysis of five low cost solar driers were evaluated at the Zoology and Physics Laboratories of the University of Ilorin, Ilorin, Nigeria. The solar driers were constructed from mosquito net, plastic, aluminum and glass with black stone inserted in it. The driers were found to be better than the other driers because they are cheap, reliable, safe to use, easy to repair, well insulated, and cost effective. The solar driers are compact, efficient with drying of fish with lowest moisture content achieved within a few days and the dried products of good quality, with long shelf life, highly acceptable to consumers. The driers save man-hour, money, use renewable energy, with no operational or maintenance costs. The driers have a long life span, with net income to fisher folks very high and the payback time for the driers very low. The adoption of the driers will contribute to the economy of rural populace in the developing countries where there is no electricity and the challenges of deforestation are becoming prominent. The improved low cost solar driers will ensure food safety and security and assist in combating climate change resulting from burning of wood and fossil fuel.

Preliminary Tests of a New Low-Cost Photogrammetric System

Science.gov (United States)

Santise, M.; Thoeni, K.; Roncella, R.; Sloan, S. W.; Giacomini, A.

2017-11-01

This paper presents preliminary tests of a new low-cost photogrammetric system for 4D modelling of large scale areas for civil engineering applications. The system consists of five stand-alone units. Each of the units is composed of a Raspberry Pi 2 Model B (RPi2B) single board computer connected to a PiCamera Module V2 (8 MP) and is powered by a 10 W solar panel. The acquisition of the images is performed automatically using Python scripts and the OpenCV library. Images are recorded at different times during the day and automatically uploaded onto a FTP server from where they can be accessed for processing. Preliminary tests and outcomes of the system are discussed in detail. The focus is on the performance assessment of the low-cost sensor and the quality evaluation of the digital surface models generated by the low-cost photogrammetric systems in the field under real test conditions. Two different test cases were set up in order to calibrate the low-cost photogrammetric system and to assess its performance. First comparisons with a TLS model show a good agreement.

PRELIMINARY TESTS OF A NEW LOW-COST PHOTOGRAMMETRIC SYSTEM

Directory of Open Access Journals (Sweden)

M. Santise

2017-11-01

Full Text Available This paper presents preliminary tests of a new low-cost photogrammetric system for 4D modelling of large scale areas for civil engineering applications. The system consists of five stand-alone units. Each of the units is composed of a Raspberry Pi 2 Model B (RPi2B single board computer connected to a PiCamera Module V2 (8 MP and is powered by a 10 W solar panel. The acquisition of the images is performed automatically using Python scripts and the OpenCV library. Images are recorded at different times during the day and automatically uploaded onto a FTP server from where they can be accessed for processing. Preliminary tests and outcomes of the system are discussed in detail. The focus is on the performance assessment of the low-cost sensor and the quality evaluation of the digital surface models generated by the low-cost photogrammetric systems in the field under real test conditions. Two different test cases were set up in order to calibrate the low-cost photogrammetric system and to assess its performance. First comparisons with a TLS model show a good agreement.

Hybrid” airlines – Generating value between low-cost and traditional

Directory of Open Access Journals (Sweden)

Stoenescu Cristina

2017-07-01

Full Text Available Over the last years, the rise of low-cost airlines has determined significant changes in the airline industry and has shaped the evolution of the existing business models. Low-cost airlines started by offering basic services at very low prices; traditional airlines responded by equally cutting costs and reinventing the services offered, with an orientation towards braking down the fare and implementing add-ons, in order to become cost-efficient. As traditional airlines developed strategies to become competitive in this new environment, low-cost airlines started focusing on new ways of enhancing passenger experience and attracting new market segments. As a result, the fragmentation of the market segments addressed by low cost carriers and traditional airlines became less obvious and the characteristics of both business models started to blend at all levels (airline operation, distribution channels, loyalty programs, fleet selection. Thus, this new competition became the foundation of the development of a new „hybrid” carrier, between the low-cost and the traditional models. This article investigates the characteristics of the newly created business model, both from a theoretical perspective and by analysing several case studies. A particular attention will be granted to the evolution of the Romanian carrier Blue Air towards the “hybrid” model. The article focuses on determining the position of the “hybrid” airline in a market with carriers situated along both sides of this business model: lower cost vs. “better” experience and raises the question on how value can be generated in this context. Another aspect tackled is the understanding of the new segmentation of the market, as a consequence of the development of the new business model. In order to achieve this purpose, a survey has been conducted, aiming to mark out the travel preferences of the passengers travelling through the Henri Coandă International Airport.

A Low Cost Single Chip VDL Compatible Transceiver ASIC

Science.gov (United States)

Becker, Robert

2004-01-01

Recent trends in commercial communications system components have focussed almost exclusively on cellular telephone technology. As many of the traditional sources of receiver components have discontinued non-cellular telephone products, the designers of avionics and other low volume radio applications find themselves increasingly unable to find highly integrated components. This is particularly true for low power, low cost applications which cannot afford the lavish current consumption of the software defined radio approach increasingly taken by certified device manufacturers. In this paper, we describe a low power transceiver chip targeting applications from low VHF to low UHF frequencies typical of avionics systems. The chip encompasses a selectable single or double conversion design for the receiver and a low power IF upconversion transmitter. All local oscillators are synthesized and integrated into the chip. An on-chip I-Q modulator and demodulator provide baseband modulation and demodulation capability allowing the use of low power, fixed point signal processing components for signal demodulation. The goal of this program is to demonstrate a low cost VDL mode-3 transceiver using this chip to receive text weather information sent using 4-slot TDMA with no support for voice. The data will be sent from an experimental ground station. This work is funded by NASA Glenn Research Center.

Low Cost Carbon Fiber From Renewable Resources

International Nuclear Information System (INIS)

Compere, A.L.

2001-01-01

The Department of Energy Partnership for a New Generation of Vehicles has shown that, by lowering overall weight, the use of carbon fiber composites could dramatically decrease domestic vehicle fuel consumption. For the automotive industry to benefit from carbon fiber technology, fiber production will need to be substantially increased and fiber price decreased to$7/kg. To achieve this cost objective, alternate precursors to pitch and polyacrylonitrile (PAN) are being investigated as possible carbon fiber feedstocks. Additionally, sufficient fiber to provide 10 to 100 kg for each of the 13 million cars and light trucks produced annually in the U.S. will require an increase of 5 to 50-fold in worldwide carbon fiber production. High-volume, renewable or recycled materials, including lignin, cellulosic fibers, routinely recycled petrochemical fibers, and blends of these components, appear attractive because the cost of these materials is inherently both low and insensitive to changes in petroleum price. Current studies have shown that a number of recycled and renewable polymers can be incorporated into melt-spun fibers attractive as carbon fiber feedstocks. Highly extrudable lignin blends have attractive yields and can be readily carbonized and graphitized. Examination of the physical structure and properties of carbonized and graphitized fibers indicates the feasibility of use in transportation composite applications

Low-cost microwave radiometry for remote sensing of soil moisture

Science.gov (United States)

Chikando, Eric Ndjoukwe

2007-12-01

Remote sensing is now widely regarded as a dominant means of studying the Earth and its surrounding atmosphere. This science is based on blackbody theory, which states that all objects emit broadband electromagnetic radiation proportional to their temperature. This thermal emission is detectable by radiometers---highly sensitive receivers capable of measuring extremely low power radiation across a continuum of frequencies. In the particular case of a soil surface, one important parameter affecting the emitted radiation is the amount of water content or, soil moisture. A high degree of precision is required when estimating soil moisture in order to yield accurate forecasting of precipitations and short-term climate variability such as storms and hurricanes. Rapid progress within the remote sensing community in tackling current limitations necessitates an awareness of the general public towards the benefits of the science. Information about remote sensing instrumentation and techniques remain inaccessible to many higher-education institutions due to the high cost of instrumentation and the current general inaccessibility of the science. In an effort to draw more talent within the field, more affordable and reliable scientific instrumentation are needed. This dissertation introduces the first low-cost handheld microwave instrumentation fully capable of surface soil moisture studies. The framework of this research is two-fold. First, the development of a low-cost handheld microwave radiometer using the well-known Dicke configuration is examined. The instrument features a super-heterodyne architecture and is designed following a microwave integrated circuit (MIC) system approach. Validation of the instrument is performed by applying it to various soil targets and comparing measurement results to gravimetric technique measured data; a proven scientific method for determining volumetric soil moisture content. Second, the development of a fully functional receiver RF front

Magnitude and Correlates of Low Birth Weight at Term in Rural Wardha, Central India

Directory of Open Access Journals (Sweden)

Kumar V

2016-05-01

Full Text Available Introduction: Birth weight is one of the most important determinant of the neonatal and infant survival. The goal of reducing low birth weight incidence by at least one third between 2000 and 2010 was one of the major goals in ‘A World Fit for Children’. The prevention of low birth weight is a public health priority, particularly in developing countries with high magnitude. Knowledge regarding magnitude and correlates help prevent the condition. Hence, the present study was carried out to study the magnitude and the correlates of low birth weight. Methodology: Two hundred and six newborn babies were recruited on a birth cohort from two Primary Health Centres (PHC of Wardha district to study growth in first year of life. Here, we present the baseline analysis of 172 children who were born full term to study the correlates of low birth weight babies born full term. The children were recruited within first week of their birth. Data was collected on socio-demographic profile, birth history, and maternal characteristics. Proportion of low birth weight was expressed in percentage along with 95% confidence interval. Univariate and multivariate logistic regression was used to study the correlates. Findings are expressed in odds ratios with their 95% confidence intervals. Results: The magnitude of low birth weight at term was found to be 33.1% (95% CI: 26.4%-40.4%. On univariate analysis, significant correlates of low birth weight were consumption of less than 50 iron-folic acid tables and being born to than mother. On multivariate analysis, the significant correlates were female sex of child (OR=2.856, being born to thin mother (OR=5.320, consumption of less than 50 tablets (OR=4.648, and complications of pregnancy (OR=2.917. Conclusions: The magnitude of low birth weight is very high and modifiable correlates of low birth weight are nutritional status of mother, lower consumption of IFA tablets and complications of pregnancy.

Design of low cost glaucoma screening

NARCIS (Netherlands)

Niessen, A. G.; Langerhorst, C. T.; Geijssen, H. C.; Greve, E. L.

1997-01-01

In 1991 the Netherlands Glaucoma Patient Association organized a glaucoma screening survey. This survey was designed to evaluate the effectiveness of a low cost screening setting. During a screening period of 8 days, 1259 subjects over the age of 49 years were examined by a team of

Outcome of very-low-birth-weight babies managed with nasal ...

African Journals Online (AJOL)

very-low-birth-weight (VLBW) infants is often due to respiratory distress syndrome (RDS) ... to be associated with CPAP failure have included lower gestational age (GA) and birth weight ... was intubated and put on MV. In developing countries ...

The Reliability, Impact, and Cost-Effectiveness of Value-Added Teacher Assessment Methods

Science.gov (United States)

Yeh, Stuart S.

2012-01-01

This article reviews evidence regarding the intertemporal reliability of teacher rankings based on value-added methods. Value-added methods exhibit low reliability, yet are broadly supported by prominent educational researchers and are increasingly being used to evaluate and fire teachers. The article then presents a cost-effectiveness analysis…

Low cost highly available digital control computer

International Nuclear Information System (INIS)

Silvers, M.W.

1986-01-01

When designing digital controllers for critical plant control it is important to provide several features. Among these are reliability, availability, maintainability, environmental protection, and low cost. An examination of several applications has lead to a design that can be produced for approximately $20,000 (1000 control points). This design is compatible with modern concepts in distributed and hierarchical control. The canonical controller element is a dual-redundant self-checking computer that communicates with a cross-strapped, electrically isolated input/output system. The input/output subsystem comprises multiple intelligent input/output cards. These cards accept commands from the primary processor which are validated, executed, and acknowledged. Each card may be hot replaced to facilitate sparing. The implementation of the dual-redundant computer architecture is discussed. Called the FS-86, this computer can be used for a variety of applications. It has most recently found application in the upgrade of San Francisco's Bay Area Rapid Transit (BART) train control currently in progress and has been proposed for feedwater control in a boiling water reactor

Low-birth-weight babies among hospital deliveries in Nepal: a hospital-based study

Directory of Open Access Journals (Sweden)

Koirala AK

2015-06-01

Full Text Available Arun K Koirala,1 Dharma N Bhatta2,3 1Administrative Department, Helping Hands Community Hospital, Chabahil, Kathmandu, 2Department of Public Health, Nobel College, Pokhara University, Kathmandu, Nepal; 3Epidemiology Unit, Faculty of Medicine, Prince of Songkla University, Songkhla, Thailand Background: Birth weight is an important indicator of a population’s health and is associated with numerous interrelated factors in the infant, mother, and physical environment. The objective of this study was to assess the proportion of low birth weight and identify the associated factors for low birth weight in a liveborn infant among the women in Morang, Nepal.Methods: A cross-sectional survey was carried out from December 2010 to March 2011 among 255 mothers who gave birth during the study period at the Koshi Zonal Hospital, Nepal. Data were collected using a structured questionnaire with face-to-face interviews. Data were analyzed through logistic regression and presented with crude and adjusted odds ratios (AORs with 95% confidence intervals (CIs.Results: The study showed that the prevalence of low-birth-weight babies was 23.1% (95% CI: 17.9–28.1. The mean (standard deviation age of mothers was 23.23 (4.18 years. The proportion of low birth weight of previous baby was 3.9% (95% CI: 0.1–7.9, and 15.7% (95% CI: 11.5–20.5 of the respondents had preterm delivery. Nearly one-third (36.1%; 95% CI: 26.4–45.6 of the respondents had >2 years’ gap after the previous delivery. Nonformal employment (AOR: 2.14; 95% CI: 0.523–8.74, vegetarian diet (AOR: 1.47; 95% CI: 0.23–9.36, and no rest during pregnancy (AOR: 1.38; 95% CI: 0.41–4.39 were factors more likely to determine low birth weight. However, none of the variables showed a significant association between low birth weight and other dependent variables.Conclusion: Low birth weight is an important factor for perinatal morbidity and mortality and is a common problem in the developing world. The

Association between maternal gingivitis, low birth weight and ...

African Journals Online (AJOL)

Objective: To determine the association between maternal gingivitis and pregnancy outcome, including low birth weight (LBW) and preterm delivery. This prospective study was conducted among 300 randomly selected pregnant women aged 20-34 years attending the antenatal clinic, University of Benin Teaching Hospital, ...

A Rapid and Low-Cost PCR Thermal Cycler for Low Resource Settings.

Directory of Open Access Journals (Sweden)

Grace Wong

Full Text Available Many modern molecular diagnostic assays targeting nucleic acids are typically confined to developed countries or to the national reference laboratories of developing-world countries. The ability to make technologies for the rapid diagnosis of infectious diseases broadly available in a portable, low-cost format would mark a revolutionary step forward in global health. Many molecular assays are also developed based on polymerase chain reactions (PCR, which require thermal cyclers that are relatively heavy (>20 pounds and need continuous electrical power. The temperature ramping speed of most economical thermal cyclers are relatively slow (2 to 3 °C/s so a polymerase chain reaction can take 1 to 2 hours. Most of all, these thermal cyclers are still too expensive ($2k to $4k for low-resource setting uses.In this article, we demonstrate the development of a low-cost and rapid water bath based thermal cycler that does not require active temperature control or continuous power supply during PCR. This unit costs $130 to build using commercial off-the-shelf items. The use of two or three vacuum-insulated stainless-steel Thermos food jars containing heated water (for denaturation and annealing/extension steps and a layer of oil on top of the water allow for significantly stabilized temperatures for PCR to take place. Using an Arduino-based microcontroller, we automate the "archaic" method of hand-transferring PCR tubes between water baths.We demonstrate that this innovative unit can deliver high speed PCR (17 s per PCR cycle with the potential to go beyond the 1,522 bp long amplicons tested in this study and can amplify from templates down to at least 20 copies per reaction. The unit also accepts regular PCR tubes and glass capillary tubes. The PCR efficiency of our thermal cycler is not different from other commercial thermal cyclers. When combined with a rapid nucleic acid detection approach, the thermos thermal cycler (TTC can enable on-site molecular

A Low-Cost, Precision Hydrometer for Classroom Use.

Science.gov (United States)

Murphy, Michael D.

1983-01-01

Describes a low cost hydrometer which can be assembled by students using stock laboratory items with a total retail cost of 17 cents. Includes list of required materials (with supplies) and experimental results on the instrument's accuracy. (JM)

Designing a Low-Cost Multifunctional Infant Incubator.

Science.gov (United States)

Tran, Kevin; Gibson, Aaron; Wong, Don; Tilahun, Dagmawi; Selock, Nicholas; Good, Theresa; Ram, Geetha; Tolosa, Leah; Tolosa, Michael; Kostov, Yordan; Woo, Hyung Chul; Frizzell, Michael; Fulda, Victor; Gopinath, Ramya; Prasad, J Shashidhara; Sudarshan, Hanumappa; Venkatesan, Arunkumar; Kumar, V Sashi; Shylaja, N; Rao, Govind

2014-06-01

Every year, an unacceptably large number of infant deaths occur in developing nations, with premature birth and asphyxia being two of the leading causes. A well-regulated thermal environment is critical for neonatal survival. Advanced incubators currently exist, but they are far too expensive to meet the needs of developing nations. We are developing a thermodynamically advanced low-cost incubator suitable for operation in a low-resource environment. Our design features three innovations: (1) a disposable baby chamber to reduce infant mortality due to nosocomial infections, (2) a passive cooling mechanism using low-cost heat pipes and evaporative cooling from locally found clay pots, and (3) insulated panels and a thermal bank consisting of water that effectively preserve and store heat. We developed a prototype incubator and visited and presented our design to our partnership hospital site in Mysore, India. After obtaining feedback, we have determined realistic, nontrivial design requirements and constraints in order to develop a new prototype incubator for clinical trials in hospitals in India. © 2014 Society for Laboratory Automation and Screening.

A complete low cost radon detection system

International Nuclear Information System (INIS)

Bayrak, A.; Barlas, E.; Emirhan, E.; Kutlu, Ç.; Ozben, C.S.

2013-01-01

Monitoring the 222 Rn activity through the 1200 km long Northern Anatolian fault line, for the purpose of earthquake precursory, requires large number of cost effective radon detectors. We have designed, produced and successfully tested a low cost radon detection system (a radon monitor). In the detector circuit of this monitor, First Sensor PS100-7-CER-2 windowless PIN photodiode and a custom made transempedence/shaping amplifier were used. In order to collect the naturally ionized radon progeny to the surface of the PIN photodiode, a potential of 3500 V was applied between the conductive hemi-spherical shell and the PIN photodiode. In addition to the count rate of the radon progeny, absolute pressure, humidity and temperature were logged during the measurements. A GSM modem was integrated to the system for transferring the measurements from the remote locations to the data process center. - Author-Highlights: • Low cost radon detection. • Integrated GSM modem for early warning of radon anomalies. • Radon detection in environment

Alkyl cross-linked low molecular weight polypropyleneimine dendrimers as efficient gene delivery vectors

Directory of Open Access Journals (Sweden)

Faezeh Moghadam Ariaee

2016-10-01

Conclusion: Our results indicated that oligomerization of low molecular weight PPI (PPI G2-alkyl-PPI G2 conjugate could be an approach to increase the transfection efficiency and to lower the cytotoxicity of low molecular weight polycations.

Western blotting of high and low molecular weight proteins using heat.

Science.gov (United States)

Kurien, Biji T; Scofield, R Hal

2015-01-01

A method for the electrophoretic transfer of high and low molecular weight proteins to nitrocellulose membranes following sodium dodecyl sulfate (SDS) polyacrylamide gel is described here. The transfer was performed with heated (70-75 °C) normal transfer buffer from which methanol had been omitted. Complete transfer of high and low molecular weight antigens (molecular weight protein standards, a purified protein, and proteins from a human tissue extract) could be carried out in 10 min for a 7 % (0.75 mm) SDS polyacrylamide gel. For 10 and 12.5 % gels (0.75 mm) the corresponding time was 15 min. A complete transfer could be carried out in 20 min for 7, 10, and 12.5 % gels (1.5 mm gels). The permeability of the gel is increased by heat, such that the proteins trapped in the polyacrylamide gel matrix can be easily transferred to the membrane. The heat mediated transfer method was compared with a conventional transfer protocol, under similar conditions. The conventional method transferred minimal low molecular weight proteins while retaining most of the high molecular weight proteins in the gel. In summary, this procedure is particularly useful for the transfer of high molecular weight proteins, very rapid, and avoids the use of methanol.

Medical, nutritional, and dental considerations in children with low birth weight.

LENUS (Irish Health Repository)

O'Connell, Susan

2009-11-01

It is estimated that 8 to 26 percent of infants are born with low birth weight (LBW) worldwide. These children are at risk for medical problems in childhood and adulthood and often have poor oral health. The influence of fetal growth on birth weight and its relevance to childhood growth and future adult health is controversial. Evidence now indicates that the postnatal period is a critical time when nutrition may predispose the child to lifelong metabolic disturbance and obesity. Given the lack of consensus on optimum infant nutrition for LBW, premature, and small-for-gestational-age infants, many such infants may be suboptimally managed. This may result in rapid postnatal weight gain and ongoing health problems. The purpose of this review was to summarize medical terminology and issues related to fetal growth, morbidity associated with being born low birth weight, premature, or small for gestational age, and the importance of appropriate nutrition in such infants. Pediatric dentists can play an important role in supporting healthy feeding practices and improving long-term health in these children. Early integrated medical and dental care should be encouraged for all children with low birth weight.

Medical, nutritional, and dental considerations in children with low birth weight.

Science.gov (United States)

O'Connell, Susan; O'Connell, Anne; O'Mullane, Elaine; Hoey, Hilary

2009-01-01

It is estimated that 8 to 26 percent of infants are born with low birth weight (LBW) worldwide. These children are at risk for medical problems in childhood and adulthood and often have poor oral health. The influence of fetal growth on birth weight and its relevance to childhood growth and future adult health is controversial. Evidence now indicates that the postnatal period is a critical time when nutrition may predispose the child to lifelong metabolic disturbance and obesity. Given the lack of consensus on optimum infant nutrition for LBW, premature, and small-for-gestational-age infants, many such infants may be suboptimally managed. This may result in rapid postnatal weight gain and ongoing health problems. The purpose of this review was to summarize medical terminology and issues related to fetal growth, morbidity associated with being born low birth weight, premature, or small for gestational age, and the importance of appropriate nutrition in such infants. Pediatric dentists can play an important role in supporting healthy feeding practices and improving long-term health in these children. Early integrated medical and dental care should be encouraged for all children with low birth weight.

Clinical effects of low-molecular-weight heparin combined with ...

African Journals Online (AJOL)

Tropical Journal of Pharmaceutical Research August 2016; 15 (8): 1787-1792 ... Keywords: Acute pancreatitis, Low-molecular-weight heparin, Multiple organ function syndrome,. APACHE II score ... mediators by lowering the expression of.

Low molecular weight salts combined with fluorinated solvents for electrolytes

Science.gov (United States)

Tikhonov, Konstantin; Yip, Ka Ki; Lin, Tzu-Yuan; Lei, Norman; Guerrero-Zavala, Guillermo; Kwong, Kristie W.

2015-11-10

Provided are electrochemical cells and electrolytes used to build such cells. An electrolyte includes at least one salt having a molecular weight less than about 250. Such salts allow forming electrolytes with higher salt concentrations and ensure high conductivity and ion transport in these electrolytes. The low molecular weight salt may have a concentration of at least about 0.5M and may be combined with one or more other salts, such as linear and cyclic imide salts and/or methide salts. The concentration of these additional salts may be less than that of the low molecular weight salt, in some embodiments, twice less. The additional salts may have a molecular weight greater than about 250. The electrolyte may also include one or more fluorinated solvents and may be capable of maintaining single phase solutions at between about -30.degree. C. to about 80.degree. C.

Ignoring the sacroiliac joint in chronic low back pain is costly

Directory of Open Access Journals (Sweden)

Polly DW

2016-01-01

Full Text Available David W Polly,1,2 Daniel Cher3 1Department of Orthopedic Surgery, 2Department of Neurosurgery, University of Minnesota, Minneapolis, MN, 3SI-BONE, Inc., San Jose, CA, USA Background: Increasing evidence supports minimally invasive sacroiliac joint (SIJ fusion as a safe and effective treatment for SIJ dysfunction. Failure to include the SIJ in the diagnostic evaluation of low back pain could result in unnecessary health care expenses. Design: Decision analytic cost model. Methods: A decision analytic model calculating 2-year direct health care costs in patients with chronic low back pain considering lumbar fusion surgery was used. Results: The strategy of including the SIJ in the preoperative diagnostic workup of chronic low back pain saves an expected US$3,100 per patient over 2 years. Cost savings were robust to reasonable ranges for costs and probabilities, such as the probability of diagnosis and the probability of successful surgical treatment. Conclusion: Including the SIJ as part of the diagnostic strategy in preoperative patients with chronic low back pain is likely to be cost saving in the short term. Keywords: chronic low back pain, lumbar fusion, sacroiliac joint pain, sacroiliac joint fusion, healthcare costs, decision modeling

Neurodevelopmental sequelae in premature newborns with extremely low weight and with very low weight at two years of age who left the Neonatal Intensive Care Unit of the Hospital Nacional Edgardo Rebagliati Martins 2009-2014

Directory of Open Access Journals (Sweden)

Carmen Fernández Sierra

2017-02-01

Full Text Available Objective: The purpose of this study is to describe the neurodevelopmental sequelae in premature newborns with extremely low weight and with very low weight at two years of age who left the Neonatal Intensive Care Unit of the Hospital Nacional Edgardo Rebagliati Martins. Materials and methods: A descriptive, retrospective, cross-sectional study in a population of 190 premature newborns with extremely low weight and with very low weight born from January 2009 to June 2014 who left the Neonatal Intensive Care Unit and took part in the follow-up program. The psychomotor development, sensorineural hearing loss, retinopathy of prematurity, presence of cerebral palsy and convulsive syndrome were assessed. Results: The average weight at birth was 1,180.53 ± 212.40 grams with a gestational age of 29.86 ± 2.33 weeks, and 51.58% of the newborns were male. Forty-two point six three percent (42.63% of the premature newborns with very low weight showed retardation of psychomotor development; 25.26%, retinopathy; 13.68%, sensorineural hearing loss; 3.68%, cerebral palsy; and 3.68%, convulsive syndrome. Fifty-two point two seven percent (52.27% of the premature newborns with extremely low weight showed retardation of psychomotor development; 50%, retinopathy; 15.91%, sensorineural hearing loss; and 2.27%, convulsive syndrome. Conclusions: Retardation of psychomotor development and retinopathy were the most important complications shown by premature newborns with extremely low weight and with very low weight at two years of age.

SeeStar: an open-source, low-cost imaging system for subsea observations

Science.gov (United States)

Cazenave, F.; Kecy, C. D.; Haddock, S.

2016-02-01

Scientists and engineers at the Monterey Bay Aquarium Research Institute (MBARI) have collaborated to develop SeeStar, a modular, light weight, self-contained, low-cost subsea imaging system for short- to long-term monitoring of marine ecosystems. SeeStar is composed of separate camera, battery, and LED lighting modules. Two versions of the system exist: one rated to 300 meters depth, the other rated to 1500 meters. Users can download plans and instructions from an online repository and build the system using low-cost off-the-shelf components. The system utilizes an easily programmable Arduino based controller, and the widely distributed GoPro camera. The system can be deployed in a variety of scenarios taking still images and video and can be operated either autonomously or tethered on a range of platforms, including ROVs, AUVs, landers, piers, and moorings. Several Seestar systems have been built and used for scientific studies and engineering tests. The long-term goal of this project is to have a widely distributed marine imaging network across thousands of locations, to develop baselines of biological information.

Maternal short stature: A risk factor for low birth weight in neonates

Directory of Open Access Journals (Sweden)

Vipin Chandra Kamathi

2012-08-01

Full Text Available Low birth weight (LBW is the most common cause of perinatal mortality, causing almost 30 percent of neonatal deaths. On the other hand, maternal short stature is known to cause a lot of obstetric complications like cephalopelvic disproportion and arrest of labor, intrauterine asphyxia, intrauterine growth retardation. The objective of our study was to find out whether there was any significant statistical association between maternal height and the birth weight of the neonate. We identified a group of low birth weight neonates (n=54 and a control group (n=51 of normal weight neonates at term in Mediciti Hospital over a period of 1 year and retrospectively looked the maternal heights for both groups. Inclusion criteria being mothers who delivered at term, mothers who had a hemoglobin level more than 10 gm/dl, mothers with relatively uneventful antenatal without any significant obstetric or medical complications during the pregnancy, and neonates with relatively uneventful post-natal periods without any significant pediatric or medical complications. The odds of having been born of a mother of short stature are more than three times greater for a low birth weight baby than a normal weight baby. The mean of birth weights of babies born to mothers of normal height is more than the mean of birth weights of babies born to mothers of short stature by 277.01 gm. This study reaffirms the observation that maternal height has a direct effect on the weight of the newborn and we propose that maternal short stature be identified as an independent risk factor for low birth weight.

Investigation of a new low cost and low consumption single poly-silicon memory

Directory of Open Access Journals (Sweden)

Patrick Calenzo

2010-10-01

Full Text Available In this paper is presented an investigation on a new low cost and voltage consumption single poly-silicon memory cell for passive RFID (Radio Frequency IDentificationapplications. This structure is low cost due to its single poly-silicon design. This memory cell has two particularities : the first one is that no deported capacitor is necessary to program this cell which allows to reduce the structure size to 1.1μm². The second one is the way the cell is erased. A Zener diode is used to generate carriers in order to be injected into the floating gate. This Zener diode is one of the key points for the functionality that has to be validated with some electrical trials. These trials permit to integrate and use the Zener diodes measured in simulations of the complete memory cell. This is done to validate the best candidate between the Zener diodes used for the cell and highlight the efficiency in consumption and rapidity to erase the cell. Besides, the writing and the reading cases are simulated in order to show the low consumption required by the cell during these phases.

Low birth weight of contemporary African Americans: an intergenerational effect of slavery?

Science.gov (United States)

Jasienska, Grazyna

2009-01-01

The average birth weight in the contemporary African-American population is about 250 g lower than the average birth weight of European Americans. Differences in genetic and socioeconomic factors present between these two groups can explain only part of birth weight variation. I propose a hypothesis that the low birth weight of contemporary African Americans not only results from the difference in present exposure to lifestyle factors known to affect fetal development but also from conditions experienced during the period of slavery. Slaves had poor nutritional status during all stages of life because of the inadequate dietary intake accompanied by high energetic costs of physical work and infectious diseases. The concept of "fetal programming" suggests that physiology and metabolism including growth and fat accumulation of the developing fetus, and, thus its birth weight, depend on intergenerational signal of environmental quality passed through generations of matrilinear ancestors. I suggest that several generations that have passed since the abolition of slavery in the United States (1865) has not been enough to obliterate the impact of slavery on the current biological and health condition of the African-American population. (c) 2008 Wiley-Liss, Inc.

Directions of organisational and low-cost energy saving of engineering enterprises

Directory of Open Access Journals (Sweden)

Dzhedzhula Viacheslav V.

2014-01-01

Full Text Available The article analyses directions of energy saving of industrial enterprises. Taking into account the tendency to continuous growth of cost of energy resources, introduction of measures that would allow reduction of energy consumption of enterprises is an urgent task. One of the most important obstacles in the process of introduction of energy efficient solutions are fund limits and low awareness of owners and managers of industrial enterprises. The article offers a new classification of energy saving measures: apart from traditional expense and organisation measures it introduces the low-cost measures notion. It offers to consider low-cost those measures that are realised by the enterprise by means of own funds, moreover, their repayment term is not more than one year. It offers analytical expression for identification of annual funds saving from introduction of low-cost measures. It considers the process of identification of saving of funds from introduction of some of the main low-cost measures in detail: replacement of lighting units, balancing of ventilation networks and elimination of water leakages from pipelines and water supply equipment. Based on the analysis of bibliography information the article provides a list of main measures on energy saving, which could be referred to the low-cost ones. The proposed approaches would allow paying more attention to practical aspects of realisation of the concept of energy saving in the industry.

Hot forming and quenching pilot process development for low cost and low environmental impact manufacturing.

Science.gov (United States)

Hall, Roger W.; Foster, Alistair; Herrmann Praturlon, Anja

2017-09-01

The Hot Forming and in-tool Quenching (HFQ®) process is a proven technique to enable complex shaped stampings to be manufactured from high strength aluminium. Its widespread uptake for high volume production will be maximised if it is able to wholly amortise the additional investment cost of this process compared to conventional deep drawing techniques. This paper discusses the use of three techniques to guide some of the development decisions taken during upscaling of the HFQ® process. Modelling of Process timing, Cost and Life-cycle impact were found to be effective tools to identify where development budget could be focused in order to be able to manufacture low cost panels of different sizes from many different alloys in a sustainable way. The results confirm that raw material cost, panel trimming, and artificial ageing were some of the highest contributing factors to final component cost. Additionally, heat treatment and lubricant removal stages played a significant role in the overall life-cycle assessment of the final products. These findings confirmed development priorities as novel furnace design, fast artificial ageing and low-cost alloy development.

Cost-effective treatment of low-risk carcinoma not invading bladder muscle.

Science.gov (United States)

Green, David A; Rink, Michael; Cha, Eugene K; Xylinas, Evanguelos; Chughtai, Bilal; Scherr, Douglas S; Shariat, Shahrokh F; Lee, Richard K

2013-03-01

Study Type - Therapy (cost effectiveness analysis) Level of Evidence 2a What's known on the subject? and What does the study add? Bladder cancer is one of the costliest malignancies to treat throughout the life of a patient. The most cost-effective management for low-risk non-muscle-invasive bladder cancer is not known. The current study shows that employing cystoscopic office fulguration for low-risk appearing bladder cancer recurrences can materially impact the cost-effectiveness of therapy. In a follow-up protocol where office fulguration is routinely employed for low-risk bladder cancers, peri-operative intravesical chemotherapy may not provide any additional cost-effectiveness benefit. To examine the cost-effectiveness of fulguration vs transurethral resection of bladder tumour (TURBT) with and without perioperative intravesical chemotherapy (PIC) for managing low-risk carcinoma not invading bladder muscle (NMIBC). Low-risk NMIBC carries a low progression rate, lending support to the use of office-based fulguration for small recurrences rather than traditional TURBT. A Markov state transition model was created to simulate treatment of NMIBC with vs without PIC, with recurrence treated by formal TURBT vs treatment with fulguration. Costing data were obtained from the Medicare Resource Based Relative Value Scale. Data regarding the success of PIC were obtained from the peer-reviewed literature, as were corresponding utilities for bladder cancer-related procedures. Sensitivity analyses were performed. At 5-year follow-up, a strategy of fulguration without PIC was the most cost-effective (mean cost-effectiveness = US $654.8/quality-adjusted life year), despite a lower recurrence rate with PIC. Both fulguration strategies dominated each TURBT strategy. Sensitivity analysis showed that fulguration without PIC dominated all other strategies when the recurrence rate after PIC was increased to ≥14.2% per year. Similarly, the cost-effectiveness of TURBT becomes more

Contrast in low-cost operational concepts for orbiting satellites

Science.gov (United States)

Walyus, Keith D.; Reis, James; Bradley, Arthur J.

2002-12-01

Older spacecraft missions, especially those in low Earth orbit with telemetry intensive requirements, required round-the-clock control center staffing. The state of technology relied on control center personnel to continually examine data, make decisions, resolve anomalies, and file reports. Hubble Space Telescope (HST) is a prime example of this description. Technological advancements in hardware and software over the last decade have yielded increases in productivity and operational efficiency, which result in lower cost. The re-engineering effort of HST, which has recently concluded, utilized emerging technology to reduce cost and increase productivity. New missions, of which NASA's Transition Region and Coronal Explorer Satellite (TRACE) is an example, have benefited from recent technological advancements and are more cost-effective than when HST was first launched. During its launch (1998) and early orbit phase, the TRACE Flight Operations Team (FOT) employed continually staffed operations. Yet once the mission entered its nominal phase, the FOT reduced their staffing to standard weekday business hours. Operations were still conducted at night and during the weekends, but these operations occurred autonomously without compromising their high standards for data collections. For the HST, which launched in 1990, reduced cost operations will employ a different operational concept, when the spacecraft enters its low-cost phase after its final servicing mission in 2004. Primarily due to the spacecraft"s design, the HST Project has determined that single-shift operations will introduce unacceptable risks for the amount of dollars saved. More importantly, significant cost-savings can still be achieved by changing the operational concept for the FOT, while still maintaining round-the-clock staffing. It"s important to note that the low-cost solutions obtained for one satellite may not be applicable for other satellites. This paper will contrast the differences between

A randomized trial of a low-carbohydrate diet vs orlistat plus a low-fat diet for weight loss.

Science.gov (United States)

Yancy, William S; Westman, Eric C; McDuffie, Jennifer R; Grambow, Steven C; Jeffreys, Amy S; Bolton, Jamiyla; Chalecki, Allison; Oddone, Eugene Z

2010-01-25

Two potent weight loss therapies, a low-carbohydrate, ketogenic diet (LCKD) and orlistat therapy combined with a low-fat diet (O + LFD), are available to the public but, to our knowledge, have never been compared. Overweight or obese outpatients (n = 146) from the Department of Veterans Affairs primary care clinics in Durham, North Carolina, were randomized to either LCKD instruction (initially, carbohydrate daily) or orlistat therapy, 120 mg orally 3 times daily, plus low-fat diet instruction (fat, 500-1000 kcal/d deficit) delivered at group meetings over 48 weeks. Main outcome measures were body weight, blood pressure, fasting serum lipid, and glycemic parameters. The mean age was 52 years and mean body mass index was 39.3 (calculated as weight in kilograms divided by height in meters squared); 72% were men, 55% were black, and 32% had type 2 diabetes mellitus. Of the study participants, 57 of the LCKD group (79%) and 65 of the O + LFD group (88%) completed measurements at 48 weeks. Weight loss was similar for the LCKD (expected mean change, -9.5%) and the O + LFD (-8.5%) (P = .60 for comparison) groups. The LCKD had a more beneficial impact than O + LFD on systolic (-5.9 vs 1.5 mm Hg) and diastolic (-4.5 vs 0.4 mm Hg) blood pressures (P Low-density lipoprotein cholesterol levels improved within the O + LFD group only, whereas glucose, insulin, and hemoglobin A(1c) levels improved within the LCKD group only; comparisons between groups, however, were not statistically significant. In a sample of medical outpatients, an LCKD led to similar improvements as O + LFD for weight, serum lipid, and glycemic parameters and was more effective for lowering blood pressure. clinicaltrials.gov Identifier: NCT00108524.

Low-cost encapsulation materials for terrestrial solar cell modules

Science.gov (United States)

Cuddihy, E. F.; Baum, B.; Willis, P.

1979-01-01

The paper presents the findings of material surveys intended to identify low cost materials which could be functional as encapsulants (by 1986) for terrestrial solar cell modules. Economic analyses have indicated that in order to meet the low cost goal of $2.70 per sq m, some or all of the following material technologies must be developed or advanced: (1) UV screening outer covers; (2) elastomeric acrylics; (3) weatherproofing and waterproofing of structural wood and paper products; (4) transparent UV stabilizers for the UV-sensitive transparent pottants; and (5) cost-effective utilization of silicone and fluorocarbon materials.

Metabolomic profiling in blood from umbilical cords of low birth weight newborns

Directory of Open Access Journals (Sweden)

Ivorra Carmen

2012-07-01

Full Text Available Abstract Background Low birth weight has been linked to an increased risk to develop obesity, type 2 diabetes, and hypertension in adult life, although the mechanisms underlying the association are not well understood. The objective was to determine whether the metabolomic profile of plasma from umbilical cord differs between low and normal birth weight newborns. Methods Fifty healthy pregnant women and their infants were selected. The eligibility criteria were being born at term and having a normal pregnancy. Pairs were grouped according to their birth weight: low birth weight (LBW, birth weight th percentile, n = 20 and control (control, birth weight between the 75th-90th percentiles, n = 30. Nuclear Magnetic Resonance (NMR was used to generate metabolic fingerprints of umbilical cord plasma samples. Simultaneously, the metabolomic profiles of the mothers were analysed. The resulting data were subjected to chemometric, principal component and partial least squares discriminant analyses. Results Umbilical cord plasma from LBW and control newborns displayed a clearly differentiated metabolic profile. Seven metabolites were identified that discriminate the LBW from the control group. LBW newborns had lower levels of choline, proline, glutamine, alanine and glucose than did the control newborns, while plasma levels of phenylalanine and citrulline were higher in LBW newborns (p Conclusions Low birth weight newborns display a differential metabolomic profile than those of normal birth weight, a finding not present in the mothers. The meaning and the potential utility of the findings as biomarkers of risk need to be addressed in future studies.

Reliability and validity of a low load endurance strength test for upper and lower extremities in patients with fibromyalgia.

Science.gov (United States)

Munguía-Izquierdo, Diego; Legaz-Arrese, Alejandro

2012-11-01

To evaluate the reliability, standard error of the mean (SEM), clinical significant change, and known group validity of 2 assessments of endurance strength to low loads in patients with fibromyalgia syndrome (FS). Cross-sectional reliability and comparative study. University Pablo de Olavide, Seville, Spain. Middle-aged women with FS (n=95) and healthy women (n=64) matched for age, weight, and body mass index (BMI) were recruited for the study. Not applicable. The endurance strength to low loads tests of the upper and lower extremities and anthropometric measures (BMI) were used for the evaluations. The differences between the readings (tests 1 and 2) and the SDs of the differences, intraclass correlation coefficient (ICC) model (2,1), 95% confidence interval for the ICC, coefficient of repeatability, intrapatient SD, SEM, Wilcoxon signed-rank test, and Bland-Altman plots were used to examine reliability. A Mann-Whitney U test was used to analyze the differences in test values between the patient group and the control group. We hypothesized that patients with FS would have an endurance strength to low loads performance in lower and upper extremities at least twice as low as that of the healthy controls. Satisfactory test-retest reliability and SEMs were found for the lower extremity, dominant arm, and nondominant arm tests (ICC=.973-.979; P.05 for all). The Bland-Altman plots showed 95% limits of agreement for the lower extremity (4.7 to -4.5), dominant arm (3.8 to -4.4), and nondominant arm (3.9 to -4.1) tests. The endurance strength to low loads test scores for the patients with FS were 4-fold lower than for the controls in all performed tests (P<.001 for all). The endurance strength to low loads tests showed good reliability and known group validity and can be recommended for evaluating endurance strength to low loads in patients with FS. For individual evaluation, however, an improved score of at least 4 and 5 repetitions for the upper and lower extremities

A REDUNDANT GNSS-INS LOW-COST UAV NAVIGATION SOLUTION FOR PROFESSIONAL APPLICATIONS

Directory of Open Access Journals (Sweden)

J. Navarro

2015-08-01

Full Text Available This paper presents the current results for the FP7 GINSEC project. Its goal is to build a pre-commercial prototype of a low-cost, accurate and reliable system for the professional UAV market. Low-cost, in this context, stands for the use of sensors in the most affordable segment of the market, especially MEMS IMUs and GNSS receivers. Reliability applies to the ability of the autopilot to cope with situations where unfavourable GNSS reception conditions or strong electromagnetic fields make the computation of the position and / or attitude of the UAV difficult. Professional and accurate mean that, at least using post-processing techniques as PPP, it will be possible to reach cm-level precisions that open the door to a range of applications demanding high levels of quality in positioning, as precision agriculture or mapping. To achieve such goal, a rigorous sensor error modelling approach, the use of redundant IMUs and a dual-GNSS receiver setup, together with close-coupling techniques and an extended Kalman filter with self-analysis capabilities have been used. Although the project is not yet complete, the results obtained up to now prove the feasibility of the aforementioned goal, especially in those aspects related to position determination. Research work is still undergoing to estimate the heading using a dual-GNNS receiver setup; preliminary results prove the validity of this approach for relatively long baselines, although positive results are expected when these are shorter than 1 m – which is a necessary requisite for small-sized UAVs.

a Redundant Gnss-Ins Low-Cost Uav Navigation Solution for Professional Applications

Science.gov (United States)

Navarro, J.; Parés, M. E.; Colomina, I.; Bianchi, G.; Pluchino, S.; Baddour, R.; Consoli, A.; Ayadi, J.; Gameiro, A.; Sekkas, O.; Tsetsos, V.; Gatsos, T.; Navoni, R.

2015-08-01

This paper presents the current results for the FP7 GINSEC project. Its goal is to build a pre-commercial prototype of a low-cost, accurate and reliable system for the professional UAV market. Low-cost, in this context, stands for the use of sensors in the most affordable segment of the market, especially MEMS IMUs and GNSS receivers. Reliability applies to the ability of the autopilot to cope with situations where unfavourable GNSS reception conditions or strong electromagnetic fields make the computation of the position and / or attitude of the UAV difficult. Professional and accurate mean that, at least using post-processing techniques as PPP, it will be possible to reach cm-level precisions that open the door to a range of applications demanding high levels of quality in positioning, as precision agriculture or mapping. To achieve such goal, a rigorous sensor error modelling approach, the use of redundant IMUs and a dual-GNSS receiver setup, together with close-coupling techniques and an extended Kalman filter with self-analysis capabilities have been used. Although the project is not yet complete, the results obtained up to now prove the feasibility of the aforementioned goal, especially in those aspects related to position determination. Research work is still undergoing to estimate the heading using a dual-GNNS receiver setup; preliminary results prove the validity of this approach for relatively long baselines, although positive results are expected when these are shorter than 1 m - which is a necessary requisite for small-sized UAVs.

Low-cost amplifier for alpha detection with photodiode

Energy Technology Data Exchange (ETDEWEB)

Domienikan, Cláudio; Costa, Priscila; Genezini, Frederico A.; Zahn, Guilherme S., E-mail: clanikan@ipen.br, E-mail: pcosta@ipen.br, E-mail: fredzini@ipen.br, E-mail: gzahn@ipen.br [Instituto de Pesquisas Energéticas e Nucleares (IPEN/CNEN-SP), São Paulo, SP (Brazil)

2017-07-01

A low-cost amplifier for Hamamatsu S3590-09 PIN photodiode to be used in alpha detection is presented. This amplifier consists basically of two circuits: a pulse preamplifier and a shaper-driver. The PIN photodiode is reverse-biased and connected to a charge preamplifier input. Incident alpha particles generate a small current pulse in the photodiode. The integrating circuit of the low noise preamplifier transforms current pulse into a voltage pulse with amplitude proportional to the charge carried by the current pulse. The shaper-driver consists of a differentiator and an integrator and is responsible for filtering and further amplifying the preamplifier signal, generating a NIM-compatible energy pulse. The performance of the set photodiode-amplifier was successively tested through the use of a {sup 243}Am radioactive source. The low-cost photodiode amplifier was designed and constructed at IPEN - CNEN/SP using national components and expertise. (author)

Developmental outcome of low birth-weight and preterm newborns: a re-view of current evidence

Directory of Open Access Journals (Sweden)

Farin Soleimani

2013-12-01

Full Text Available Low birth weight (LBW and preterm birth are one the most important causes of death in the world and therefore are considered as one of the major health problems. Global statistics demonstrates an increase in the prevalence of low birth weight in the developing countries. Low birth weight infants are exposed to complications such as major neurosensory impairements, cerebral palsy, cognitive and language delays, neuromotor developmental delay, blindness and hearing loss, behavioral and psychosocial disorders, learning difficulties and dysfunction in scholastic performances. The majority of infant's death and developmental disorders were due to disorders relating to prematurity and unspecified low birth weight. Infants weighing less than 2500 g, is a major determinant of both neonatal and infant mortality rates and, together with congenital anomalies (e.g., cardiac, central nervous system, and respiratory, contributes significantly to childhood morbidity. Various studies indicate that low birth weight infants are suffering from physiological and psychosocial disabilities, two to three times more than the other children. At school age, preterm and low birth weight infants have poorer physical growth, cognitive function, and school performance. These disadvantages appear to persist into adulthood and therefore have broad implications for society. Although the survival rates have increased dramatically and the incidence of morbidities has decreased, the complications are still considered to be associated with economical and social burdens. Most children with Low birth weight suffer from multiple disabilities. Therefore, they need special and consistent care. On demand of reducing the infant mortality rate, the need to decrease the complications in low birth weight and preterm infants should be considered by the policy makers in health care system. In this review article, we assessed current evidences on developmental outcomes of low birth weight and

Construction and calibration of a low cost and fully automated vibrating sample magnetometer

Science.gov (United States)

El-Alaily, T. M.; El-Nimr, M. K.; Saafan, S. A.; Kamel, M. M.; Meaz, T. M.; Assar, S. T.

2015-07-01

A low cost vibrating sample magnetometer (VSM) has been constructed by using an electromagnet and an audio loud speaker; where both are controlled by a data acquisition device. The constructed VSM records the magnetic hysteresis loop up to 8.3 KG at room temperature. The apparatus has been calibrated and tested by using magnetic hysteresis data of some ferrite samples measured by two scientifically calibrated magnetometers; model (Lake Shore 7410) and model (LDJ Electronics Inc. Troy, MI). Our VSM lab-built new design proved success and reliability.

Ultra-low-power and ultra-low-cost short-range wireless receivers in nanoscale CMOS

CERN Document Server

Lin, Zhicheng; Martins, Rui Paulo

2016-01-01

This book provides readers with a description of state-of-the-art techniques to be used for ultra-low-power (ULP) and ultra-low-cost (ULC), short-range wireless receivers. Readers will learn what is required to deploy these receivers in short-range wireless sensor networks, which are proliferating widely to serve the internet of things (IoT) for “smart cities.” The authors address key challenges involved with the technology and the typical tradeoffs between ULP and ULC. Three design examples with advanced circuit techniques are described in order to address these trade-offs, which specially focus on cost minimization. These three techniques enable respectively, cascading of radio frequency (RF) and baseband (BB) circuits under an ultra-low-voltage (ULV) supply, cascoding of RF and BB circuits in current domain for current reuse, and a novel function-reuse receiver architecture, suitable for ULV and multi-band ULP applications such as the sub-GHz ZigBee. ·         Summarizes the state-of-the-art i...

Postdischarge growth assessment in very low birth weight infants.

Science.gov (United States)

Park, Joon-Sik; Han, Jungho; Shin, Jeong Eun; Lee, Soon Min; Eun, Ho Seon; Park, Min-Soo; Park, Kook-In; Namgung, Ran

2017-03-01

The goal of nutritional support for very-low-birth-weight (VLBW) infants from birth to term is to match the in utero growth rates; however, this is rarely achieved. We evaluated postdischarge growth patterns and growth failure in 81 Korean VLBW infants through a retrospective study. Weight and height were measured and calculated based on age percentile distribution every 3 months until age 24 months. Growth failure was defined as weight and height below the 10th percentile at 24 months. For the subgroup analysis, small-for-gestational age (SGA) and extremely low birth weight (ELBW) infants were evaluated. The growth patterns based on the Korean, World Health Organization (WHO), or Centers for Disease Control and Prevention (CDC) standard were serially compared over time. At postconception age (PCA) 40 weeks, 47 (58%) and 45 infants (55%) showed growth failure in terms of weight and height, respectively. At PCA 24 months, 20 infants (24%) showed growth failure for weight and 14 (18%) for height. Growth failure rates were higher for the SGA infants than for the appropriate-weight-for-gestational age infants at PCA 24 months ( P =0.045 for weight and P =0.038 for height). Growth failure rates were higher for the ELBW infants than for the non-ELBW infants at PCA 24 months ( P <0.001 for weight and P =0.003 for height). Significant differences were found among the WHO, CDC, and Korean standards ( P <0.001). Advancements in neonatal care have improved the catch-up growth of VLBW infants, but this is insufficient. Careful observation and aggressive interventions, especially in SGA and ELBW infants, are needed.

Development of a low-cost sun sensor for nanosatellites

Science.gov (United States)

Antonello, Andrea; Olivieri, Lorenzo; Francesconi, Alessandro

2018-03-01

Sun sensors represent a common and reliable technology for attitude determination, employed in many space missions thanks to their limited size and weight. Typically, two-axis digital Sun sensors employ an array of active pixels arranged behind a small aperture; the position of the sunlight's spot allows to determine the direction of the Sun. With the advent of smaller vehicles such as CubeSats and Nanosats, there is the need to further reduce the size and weight of such devices: as a trade-off, this usually results in the curtail of the performances. Nowadays, state of the art Sun sensors for CubeSats have resolutions of about 0.5°, with fields of view in the ±45° to ±90° range, with off-the-self prices of several thousands of dollars. In this work we introduce a novel low-cost miniaturized Sun sensor, based on a commercial CMOS camera detector; its main feature is the reduced size with respect to state-of-the-art sensors developed from the same technology, making it employable on CubeSats. The sensor consists of a precisely machined pinhole with a 10 μm circular aperture, placed at a distance of 7 mm from the CMOS. The standoff distance and casing design allow for a maximum resolution of less than 0.03°, outperforming most of the products currently available for nano and pico platforms; furthermore, the nature of the technology allows for reduced size and lightweight characteristics. The design, development and laboratory tests of the sensor are here introduced, starting with the definition of the physical model, the geometrical layout and its theoretical resolution; a more accurate model was then developed in order to account for the geometrical deviations and deformations of the pinhole-projected light-spot, as well as to account for the background noise and disturbances to the electronics. Finally, the laboratory setup is presented along with the test campaigns: the results obtained are compared with the simulations, allowing for the validation of the

Nutritional status of low birth weight infants in Makkah region: Evaluation of anthropometric and biochemical parameters.

Science.gov (United States)

Kensara, Osama Adnan; Azzeh, Firas Sultan

2016-04-01

To assess the nutritional status of low birth weight infants from Makkah area immediately after birth. The prospective study was conducted between October and December 2012 at Al-Noor Speciality Hospital, Makkah, Saudi Arabia, and comprised low birth weight infants who were divided into three equal groups according to their birth weight: group A (low birthweight1501-2500gm), group B (very low birthweight1001-1500gm), and group C (extremely low birth weight 0.05). Normal serum phosphorus, potassium and magnesium levels and mild hypocalcaemia were observed in all infants. However, hypernatraemia was significantly evident (pnutritional status in terms of low anthropometric and abnormal biochemical measures. It was not possible to correlate the birth weight of the neonates to the parameters of the complete blood tests.

Improved Iterative Hard- and Soft-Reliability Based Majority-Logic Decoding Algorithms for Non-Binary Low-Density Parity-Check Codes

Science.gov (United States)

Xiong, Chenrong; Yan, Zhiyuan

2014-10-01

Non-binary low-density parity-check (LDPC) codes have some advantages over their binary counterparts, but unfortunately their decoding complexity is a significant challenge. The iterative hard- and soft-reliability based majority-logic decoding algorithms are attractive for non-binary LDPC codes, since they involve only finite field additions and multiplications as well as integer operations and hence have significantly lower complexity than other algorithms. In this paper, we propose two improvements to the majority-logic decoding algorithms. Instead of the accumulation of reliability information in the existing majority-logic decoding algorithms, our first improvement is a new reliability information update. The new update not only results in better error performance and fewer iterations on average, but also further reduces computational complexity. Since existing majority-logic decoding algorithms tend to have a high error floor for codes whose parity check matrices have low column weights, our second improvement is a re-selection scheme, which leads to much lower error floors, at the expense of more finite field operations and integer operations, by identifying periodic points, re-selecting intermediate hard decisions, and changing reliability information.

Correlation of periodontitis during pregnancy and incidence of low birth weight babies

Directory of Open Access Journals (Sweden)

Prashanthi Reddy

2012-01-01

After delivery, gestational age (in weeks and birth weight of baby (in kg were collected from hospital records. Infants were placed into following categories by gestational age (WHO and by birth weight preterm-3,900 gm. Results: Based on the findings of the study, a significant correlation was observed between periodontitis and low birth weight and preterm low birth weight (p<_0.001 and a significant relation was observed between periodontitis and gestational age (p < 0.001. Conclusion: Periodontitis was considered a risk indicator for reduced gestational age and birth weight. Multicentric trials will greatly help to establish the independent role of periodontal disease and their relationship in terms of pregnancy outcomes.

Performance of semiconductor radiation sensors for simple and low-cost radiation detector

International Nuclear Information System (INIS)

Tanimura, Yoshihiko; Birumachi, Atsushi; Yoshida, Makoto; Watanabe, Tamaki

2008-01-01

In order to develop a simple but reliable radiation detector for the general public, photon detection performances of radiation sensors have been studied in photon calibration fields and by Monte Carlo simulations. A silicon p-i-n photodiode and a CdTe detector were selected for the low cost sensors. Their energy responses to ambient dose equivalent H * (10) were evaluated over the energy range from 60 keV to 2 MeV. The response of the CdTe decreases markedly with increasing photon energy. On the other hand, the photodiode has the advantage of almost flat response above 150 keV. The sensitivities of these sensors are 4 to 6 cpm for the natural radiation. Detection limits of the radiation level are low enough to know the extreme increase of radiation due to emergency situations of nuclear power plants, fuel treatment facilities and so on. (author)

Low-cost solar array structure development

Science.gov (United States)

Wilson, A. H.

1981-06-01

Early studies of flat-plate arrays have projected costs on the order of $50/square meter for installed array support structures. This report describes an optimized low-cost frame-truss structure that is estimated to cost below $25/square meter, including all markups, shipping an installation. The structure utilizes a planar frame made of members formed from light-gauge galvanized steel sheet and is supposed in the field by treated-wood trusses that are partially buried in trenches. The buried trusses use the overburden soil to carry uplift wind loads and thus to obviate reinforced-concrete foundations. Details of the concept, including design rationale, fabrication and assembly experience, structural testing and fabrication drawings are included.

Construction of a low-cost luximeter

Science.gov (United States)

Pedroso, L. S.; de Macedo, J. A.; de Araújo, M. S. T.; Voelzke, M. R.

2016-04-01

This paper proposes the construction of an electronic instrument called digital luximeter, combining simplicity and low cost, making it simpler and cheaper than those on the market. Its construction tends to facilitate dissemination and access to this type of measuring instrument between high school teachers and educational institutions, making it ideal to be a science lab.

Low-input, low-cost IPM program helps manage potato psyllid

Directory of Open Access Journals (Sweden)

Sean M. Prager

2016-04-01

Full Text Available Potato psyllid is a pest of solanaceous plants throughout much of the western United States, including California, where it has increased and is now overwintering. The psyllid affects its plant hosts from direct feeding and by transmitting a plant pathogenic bacterium, Lso. Millions of dollars of damages have occurred in the U.S. potato industry, and a large acreage of crops is susceptible in California. Control is complicated because different crops have different pest complexes and susceptibilities to Lso; currently most growers use multiple pesticide applications, including broad-spectrum insecticides. Results of our field trials at South Coast Research and Extension Center indicate that the use of broad-spectrum insecticides actually increases psyllid numbers in both peppers and potatoes. We have developed a low-input IPM program, which in field trials produced encouraging results in peppers, potatoes and tomatoes compared to broad-spectrum insecticides. Economic analysis showed the low-input IPM approach was more cost effective than a standard insecticide program in tomatoes.

The effect of low birth weight on height, weight and behavioral outcomes in the medium-run

DEFF Research Database (Denmark)

Datta Gupta, Nabanita; Deding, Mette; Lausten, Mette

2013-01-01

as physical growth at ages 6 months, 3½, 7½ and 11 years using data from the Danish Longitudinal Survey of Children. Observing the same children at different points in time enabled us to chart the evolution of anthropometric and behavioral deficits among children born with low birth weight and helped......A number of studies have documented negative long term effects of low birth weight. Yet, not much is known about the dynamics of the process leading to adverse health and educational outcomes in the long run. While previous studies focusing mainly on LBW effects on physical growth and cognitive...... outcomes have found effects of the same size at both school age and young adulthood, others have found a diminishing negative effect over time. The purpose of this paper was to bring new evidence to this issue by analyzing the medium run effects of low birth weight on child behavioral outcomes as well...

Effect of hospital nutrition support on growth velocity and nutritional status of low birth weight infants.

Science.gov (United States)

Azzeh, Firas S; Alazzeh, Awfa Y; Dabbour, Ibrahim R; Jazar, Abdelelah S; Obeidat, Ahmed A

2014-10-01

Infants with low birth weights are provided with hospital nutrition support to enhance their survivability and body weights. However, different hospitals have different nutrition support formulas. Therefore, the effectiveness of these nutrition support formulas should be investigated. To assess the effect of hospital nutrition support on growth velocity and nutritional status of low birth weight infants at Al-Noor hospital, Saudi Arabia. A cross-sectional study was conducted between October, 2010 and December, 2012. Three hundred newborns were recruited from Al-Noor Hospital in Makkah city, Saudi Arabia. Infants were selected according to their birth weights and were divided equally into three groups; (i) Low Birth Weight (LBW) infants (1501- 2500 g birth weight), (ii) Very Low Birth Weight (VLBW) infants (1001-1500 g birth weight) and (iii) Extremely Low Birth Weight (ELBW) infants ( 0.05) were observed among groups. Serum calcium, phosphorus and potassium levels at discharge were higher (p < 0.05) than that at birth for ELBW and VLBW groups; while sodium level decreased in ELBW group to be within normal ranges. Albumin level was improved (p < 0.05) in ELBW group. Health care management for low birth weight infants in Al-Noor Hospital was not sufficient to achieve normal growth rate for low birth weight infants, while biochemical indicators were remarkably improved in all groups. Copyright AULA MEDICA EDICIONES 2014. Published by AULA MEDICA. All rights reserved.

SEARCHING FOR LOW WEIGHT PSEUDO-CODEWORDS

International Nuclear Information System (INIS)

Chertkov, Michael; Stepanov, Mikhail

2007-01-01

Belief Propagation (BP) and Linear Programming (LP) decodings of LDPC codes are discussed. The authors summarize results of instanton/pseudo-codeword approach developed for analysis of the error-floor domain of the codes. Instantons are special, code and decoding specific, configurations of the channel noise contributing most to the Frame-Error-Rate (FER). Instantons are decoded into pseudo-codewords. Instanton/pseudo-codeword with the lowest weight describes the largest Signal-to-Noise-Ratio (SNR) asymptotic of FER, while the whole spectra of the low weight instantons is descriptive of the FER vs. SNR profile in the extended error-floor domain. First, they describe a general optimization method that allows to find the instantons for any coding/decoding. Second, they introduce LP-specific pseudo-codeword search algorithm that allows efficient calculations of the pseudo-codeword spectra. Finally, they discuss results of combined BP/LP error-floor exploration experiments for two mode codes.

SEARCHING FOR LOW WEIGHT PSEUDO-CODEWORDS

Energy Technology Data Exchange (ETDEWEB)

CHERTKOV, MICHAEL [Los Alamos National Laboratory; STEPANOV, MIKHAIL [Los Alamos National Laboratory

2007-01-23

Belief Propagation (BP) and Linear Programming (LP) decodings of LDPC codes are discussed. The authors summarize results of instanton/pseudo-codeword approach developed for analysis of the error-floor domain of the codes. Instantons are special, code and decoding specific, configurations of the channel noise contributing most to the Frame-Error-Rate (FER). Instantons are decoded into pseudo-codewords. Instanton/pseudo-codeword with the lowest weight describes the largest Signal-to-Noise-Ratio (SNR) asymptotic of FER, while the whole spectra of the low weight instantons is descriptive of the FER vs. SNR profile in the extended error-floor domain. First, they describe a general optimization method that allows to find the instantons for any coding/decoding. Second, they introduce LP-specific pseudo-codeword search algorithm that allows efficient calculations of the pseudo-codeword spectra. Finally, they discuss results of combined BP/LP error-floor exploration experiments for two mode codes.

Implementation of a Low-Cost Energy and Environment Monitoring System Based on a Hybrid Wireless Sensor Network

Directory of Open Access Journals (Sweden)

Dong Sik Kim

2017-01-01

Full Text Available A low-cost hybrid wireless sensor network (WSN that utilizes the 917 MHz band Wireless Smart Utility Network (Wi-SUN and a 447 MHz band narrow bandwidth communication network is implemented for electric metering and room temperature, humidity, and CO2 gas measurements. A mesh network connection that is commonly utilized for the Internet of Things (IoT is used for the Wi-SUN under the Contiki OS, and a star connection is used for the narrow bandwidth network. Both a duty-cycling receiver algorithm and a digitally controlled temperature-compensated crystal oscillator algorithm for frequency reference are implemented at the physical layer of the receiver to accomplish low-power and low-cost wireless sensor node design. A two-level temperature-compensation approach, in which first a fixed third-order curve and then a sample-based first-order curve are applied, is proposed using a conventional AT-cut quartz crystal resonator. The developed WSN is installed in a home and provides reliable data collection with low construction complexity and power consumption.

Prediction of low birth weight from other anthropometric parameters ...

African Journals Online (AJOL)

PROF. EZECHUKWU

2013-09-29

Sep 29, 2013 ... rameters, low birth weight, new- born, Nigeria. Introduction ... measurements of the new born babies8,9. ... of length, occipitofrontal circumference, mid-arm cir- .... intrinsic and extrinsic factors associated with race ac- count for ...

[The impact of low birth weight related to gestational depression on federal funding of public health: a study in Pelotas, Rio Grande do Sul State, Brazil].

Science.gov (United States)

Menezes, Leticia Oliveira de; Pinheiro, Ricardo Tavares; Quevedo, Luciana de Avila; Oliveira, Sandro Schreiber de; Silva, Ricardo Azevedo da; Pinheiro, Karen Amaral Tavares; Santo, Graciela Coelho Espírito; Jansen, Karen

2012-10-01

Low birth weight is related to morbidity and mortality and sequelae during infant development, thereby impacting health system costs. It is thus important to evaluate factors that influence low birth weight and to estimate their impact on the Brazilian Unified National Health System (SUS). This was a nested prospective study in a cohort of pregnant women who received prenatal care and gave birth in the National Health System in hospitals with ICUs in the city of Pelotas, Rio Grande do Sul State, Brazil. Gestational depression was associated with a fourfold risk of low birth weight (PR = 3.94; CI: 1.49-10.36). Based on the population-attributable fraction, in the overall population an estimated 36.17% of low birth weight infants are born to mothers with an episode of depression during pregnancy, with an estimated cost of more than R$76 million (U$38 million) in Brazil. The study recommends the expansion of preventive and therapeutic mental health care measures for pregnant women and the adequate use of resources in the Unified National Health System to improve neonatal outcomes.

System identification of a small low-cost unmanned aerial vehicle using flight data from low-cost sensors

Science.gov (United States)

Hoffer, Nathan Von

Remote sensing has traditionally been done with satellites and manned aircraft. While. these methods can yield useful scientificc data, satellites and manned aircraft have limitations in data frequency, process time, and real time re-tasking. Small low-cost unmanned aerial vehicles (UAVs) provide greater possibilities for personal scientic research than traditional remote sensing platforms. Precision aerial data requires an accurate vehicle dynamics model for controller development, robust flight characteristics, and fault tolerance. One method of developing a model is system identification (system ID). In this thesis system ID of a small low-cost fixed-wing T-tail UAV is conducted. The linerized longitudinal equations of motion are derived from first principles. Foundations of Recursive Least Squares (RLS) are presented along with RLS with an Error Filtering Online Learning scheme (EFOL). Sensors, data collection, data consistency checking, and data processing are described. Batch least squares (BLS) and BLS with EFOL are used to identify aerodynamic coecoefficients of the UAV. Results of these two methods with flight data are discussed.

Sensorless control of low-cost single-phase hybrid switched reluctance motor drive

DEFF Research Database (Denmark)

Jakobsen, Uffe; Lu, Kaiyuan; Rasmussen, Peter Omand

2013-01-01

This paper presents a sensorless-controlled, low-cost, low-power, variable-speed drive system suitable for fan and pump applications. The main advantages of this drive system are the low system cost, simple converter structure, and simple but robust sensorless control technique. The drive motor...... is a special Hybrid Switched Reluctance Motor (HSRM). The proposed sensorless control method utilizes beneficially the stator side permanent magnet field and its performance is motor parameter independent. The unique low-cost drive system solution, simple and robust sensorless control features of this drive...

Sensorless Control of Low-cost Single-phase Hybrid Switched Reluctance Motor Drive

DEFF Research Database (Denmark)

Jakobsen, Uffe; Lu, Kaiyuan; Rasmussen, Peter Omand

2015-01-01

This paper presents a sensorless-controlled, low-cost, low-power, and variable-speed drive system suitable for fan and pump applications. The main advantages of this drive system are the low system cost, simple converter structure, and simple but robust sensorless control technique. The drive motor...... is a special hybrid switched reluctance motor. The proposed sensorless control method beneficially utilizes the stator side PM field and its performance is motor parameter independent. The unique low-cost drive system solution, simple and robust sensorless control features of this drive system, is demonstrated...

Epigenetic Consequences of Low Birth-Weight and Preterm Birth in Adult Twins

DEFF Research Database (Denmark)

Tan, Qihua

2018-01-01

could be detrimental to health later in life. Current epigenetic studies using genome-wide DNA methylation profiling have discovered molecular evidence confirming that, as important early life events, both low birth-weight and premature birth can result in long-lasting epigenetic consequences...... that impact health at adult ages. Results from our epigenome-wide association studies indicate that the two moderately correlated traits of adverse pregnancy outcome could be linked to increased susceptibility to different health problems with low birth-weight more relevant to metabolic disorders, while......Adverse birth outcomes including low birth-weight and preterm birth are associated with long-term morbidity and health consequences at adult ages. Molecular mechanisms including epigenetic modification may have been involved in the adaptation to the stressful condition in peridelivery period which...

Preterm Birth and Low Birth Weight Following Icsi- Pregnancies

OpenAIRE

Aygül Demirol; Süleyman Güven; Timur Gürgan

2006-01-01

OBJECTIVE: To report preterm birth and low birth weight rate of intracytoplasmic sperm injection (ICSI) related pregnancies and to compare our data with literature findings. STUDY DESIGN: Three-hundred and eighty-nine pregnancies following controlled ovarian hyperstimulation and intracytoplasmic sperm injection were retrospectively evaluated. Patients’ characteristics including age, gestational age at delivery and birth weight were noted from special clinic files. Women with early pregnanc...

Analysis on Occupants’ Satisfaction for Safety Performance Assessment in Low Cost Housing

Directory of Open Access Journals (Sweden)

Husin Husrul Nizam

2014-01-01

Full Text Available The delivery performance of the low cost housing is questioned since the occupants are prone towards safety hazards in the housing complex, such as structural instability and falling building fragments. Without defining the occupants’ requirements for the development of low cost housing, the prevailing safety factors are hard to be determined. This paper explores the rationale of safety performance assessment in the low cost housing by considering the occupants’ participation to achieve a better safety provision during occupancy period. Questionnaire survey was distributed to 380 occupants of the low cost housing in Kuala Lumpur and Selangor, Malaysia. The result shows that 80.8% of the respondents had expressed their dissatisfaction with the safety performance of the lift. By referring to the mode of ranking level, the most significant aspect rated by the respondents is Building Safety Features, with 51.6% respondents. The attained aspects can be fundamental parameters which can be considered in the future development of low cost housing.

PREPARATION OF ULTRA-LOW VOLUME WEIGHT AUTOCLAVED AERATED CONCRETE

Directory of Open Access Journals (Sweden)

Ondrej Koutny

2016-12-01

Full Text Available Autoclaved aerated concrete is a modern construction material that gains its popularity especially due to its thermal insulation performance resulting from low volume weight and porous structure with sufficient mechanical strength. Nowadays, there are attempts to use this material for thermal insulation purposes and to replace current systems, which have many disadvantages, mainly concerning durability. The key for improvement of thermal insulation properties is therefore obtaining a material based on autoclaved aerated concrete with extremely low volume weight (below 200 kg/m ³ ensuring good thermal isolation properties, but with sufficient mechanical properties to allow easy manipulation. This material can be prepared by foaming very fine powder materials such as silica fume or very finely ground sand. This paper deals with the possibilities of preparation and summarizes the basic requirements for successful preparation of such a material.

Low-cost production of solar-cell panels

Science.gov (United States)

Bickler, D. B.; Gallagher, B. D.; Sanchez, L. E.

1980-01-01

Large-scale production model combines most modern manufacturing techniques to produce silicon-solar-cell panels of low costs by 1982. Model proposes facility capable of operating around the clock with annual production capacity of 20 W of solar cell panels.

Modeling Optimal Scheduling for Pumping System to Minimize Operation Cost and Enhance Operation Reliability

Directory of Open Access Journals (Sweden)

Yin Luo

2012-01-01

Full Text Available Traditional pump scheduling models neglect the operation reliability which directly relates with the unscheduled maintenance cost and the wear cost during the operation. Just for this, based on the assumption that the vibration directly relates with the operation reliability and the degree of wear, it could express the operation reliability as the normalization of the vibration level. The characteristic of the vibration with the operation point was studied, it could be concluded that idealized flow versus vibration plot should be a distinct bathtub shape. There is a narrow sweet spot (80 to 100 percent BEP to obtain low vibration levels in this shape, and the vibration also follows similar law with the square of the rotation speed without resonance phenomena. Then, the operation reliability could be modeled as the function of the capacity and rotation speed of the pump and add this function to the traditional model to form the new. And contrast with the tradition method, the result shown that the new model could fix the result produced by the traditional, make the pump operate in low vibration, then the operation reliability could increase and the maintenance cost could decrease.

Low-Cost Propellant Launch From a Tethered Balloon

Science.gov (United States)

Wilcox, Brian

2006-01-01

A document presents a concept for relatively inexpensive delivery of propellant to a large fuel depot in low orbit around the Earth, for use in rockets destined for higher orbits, the Moon, and for remote planets. The propellant is expected to be at least 85 percent of the mass needed in low Earth orbit to support the NASA Exploration Vision. The concept calls for the use of many small ( 10 ton) spin-stabilized, multistage, solid-fuel rockets to each deliver 250 kg of propellant. Each rocket would be winched up to a balloon tethered above most of the atmospheric mass (optimal altitude 26 2 km). There, the rocket would be aimed slightly above the horizon, spun, dropped, and fired at a time chosen so that the rocket would arrive in orbit near the depot. Small thrusters on the payload (powered, for example, by boil-off gases from cryogenic propellants that make up the payload) would precess the spinning rocket, using data from a low-cost inertial sensor to correct for small aerodynamic and solid rocket nozzle misalignment torques on the spinning rocket; would manage the angle of attack and the final orbit insertion burn; and would be fired on command from the depot in response to observations of the trajectory of the payload so as to make small corrections to bring the payload into a rendezvous orbit and despin it for capture by the depot. The system is low-cost because the small rockets can be mass-produced using the same techniques as those to produce automobiles and low-cost munitions, and one or more can be launched from a U.S. territory on the equator (Baker or Jarvis Islands in the mid-Pacific) to the fuel depot on each orbit (every 90 minutes, e.g., any multiple of 6,000 per year).

A low-cost electronic tensiometer system for continuous monitoring of soil water potential

Directory of Open Access Journals (Sweden)

Martin Thalheimer

2013-12-01

Full Text Available A low cost system for measuring soil water potential and data logging was developed on the basis of an Arduino microcontroller board, electronic pressure transducers and water-filled tensiometers. The assembly of this system requires only minimal soldering, limited to the wiring of the power supply and the pressure sensors to the microcontroller board. The system presented here is, therefore, not only inexpensive, but also suited for easy reproduction by users with only basic technical skills. The utility and reliability of the system was tested in a commercial apple orchard.

MFT homogeneity study at TNX: Final report on the low weight percent solids concentration

International Nuclear Information System (INIS)

Jenkins, W.J.

1993-01-01

A statistical design and analysis of both elemental analyses and weight percent solids analyses data was utilized to evaluate the MFT homogeneity at low heel levels and low agitator speed at both high and low solids feed concentrations. The homogeneity was also evaluated at both low and high agitator speed at the 6000+ gallons static level. The dynamic level portion of the test simulated feeding the Melter from the MFT to evaluate the uniformity of the solids slurry composition (Frit-PHA-Sludge) entering the melter from the MFT. This final report provides the results and conclusions from the second half of the study, the low weight percent solids concentration portion, as well as a comparison with the results from the first half of the study, the high weight percent solids portion

What has high fertility got to do with the low birth weight problem in Africa?

Directory of Open Access Journals (Sweden)

Ivy Kodzi

2013-04-01

Full Text Available BACKGROUND There has been much concern about adverse individual and societal consequences of high fertility in sub-Saharan Africa. One concern is that children of high birth orders may have low birth weight. However, the evidence for such an effect is not strong. OBJECTIVE Our objective is to investigate whether a woman's high parity status might increase her risks of having a baby with low birth weight. METHODS Pooling 60 Demographic and Health Surveys data-sets from 32 sub-Saharan countries, we selected children of mothers who had at least two births of order two or higher within the five years preceding the surveys. We modeled the probability of having a child with low birth weight and controlled for all mother-specific, household, or community characteristics that are constant over the period of analysis, by including fixed-effects for the mother. We also controlled for salient factors including sex, maternal age, preceding birth interval, and whether prenatal care was received. RESULTS We found no adverse effect of increasing parity on the odds of having a child with low birth weight at normative ranges; such effects only manifest at extremely high parities - nine or more children. At moderately high parities, the chance of low birth weight is actually lower than at very low parities. CONCLUSIONS While high fertility may lead to various adverse outcomes for African families, low birth weight appears not to be among these outcomes. Other factors, such as adolescent childbearing, poverty, and inadequate prenatal care may be more important determinants of low birth weight in Africa.

Environmental and Biological Factors Influencing Infant’s Low Birth Weight in Teenage Mothers: A Systematic Review

Directory of Open Access Journals (Sweden)

Seyedeh Samira Mokhlesi

2016-01-01

Full Text Available Background and Objectives: Pregnancy in low age has been proposed as one of the important factors causing risks and adverse outcomes. One of these complications is low birth weight (LBW, which is an important health indicator in any countries. In this study, texts related to Environmental and Biological Factors Influencing Infant’s Low Birth Weight in teenage mothers was reviewed. Methods: In the present study, articles indexed in the databases Pubmed, Science Direct, Scopus, Google Scholar, SID, Magiran, were used. Results: In the present study, a total of 22 articles related to teenage pregnancy and low birth weight were studied. Also, all factors influencing infants’ low birth weight in teenegers were evaluated in the areas of biological and environmental factors. Conclusion: The results of the present study showed that environmental and biological parameters are factors influencing low birth weight in teenage pregnancy. Thus, to reduce social problem of low birth weight and to improve this indicator in both environmental and biological issues, health intervention is necessary.

Low cost PEMFC generator manufacturing line. The competitiveness and trustability strategy

Energy Technology Data Exchange (ETDEWEB)

Ferreira, Valdemar Stelita; Souza, Adler de; Ferreira, Mauricio S. [NovoCell Energy Systems S.A., Santa Barbara D' Oeste, SP (Brazil)], Email: valdemar.stelita@novocell.ind.br; Muschellack, Erich [Idee Technologies Ltda, Sao Paulo, SP (Brazil)

2010-07-01

Concepts of Lean Manufacturing Lines for Polymer Electrolyte Membrane Fuel Cells (PEMFC) have been searched for the last twenty years, with no fully success so far. As this is considered around the world the last barrier to spread the hydrogen economy for universities and science institutions to the normal life of people, we at NovoCell decided six years ago to develop and test all key aspects that can help making it by a 'Low Cost, Feasible and Reliable Production Process'. The present work is a demonstration of the results we achieved, the main characteristics of the prototypes produced from the lines and that will be the base for our commercial operation starting next year. (author)

Low cost PEMFC generator manufacturing line. The competitiveness and trustability strategy

Energy Technology Data Exchange (ETDEWEB)

Ferreira, Valdemar Stelita; Souza, Adler de; Ferreira, Mauricio S. [NovoCell Energy Systems S.A., Santa Barbara D' Oeste, SP (Brazil)], Email: valdemar.stelita@novocell.ind.br; Muschellack, Erich [Idee Technologies Ltda, Sao Paulo, SP (Brazil)

2010-07-01

Concepts of Lean Manufacturing Lines for Polymer Electrolyte Membrane Fuel Cells (PEMFC) have been searched for the last twenty years, with no fully success so far. As this is considered around the world the last barrier to spread the hydrogen economy for universities and science institutions to the normal life of people, we at NovoCell decided six years ago to develop and test all key aspects that can help making it by a 'Low Cost, Feasible and Reliable Production Process'. The present work is a demonstration of the results we achieved, the main characteristics of the prototypes produced from the lines and that will be the base for our commercial operation starting next year. (author)

Design of a low-cost hybrid powertrain with large fuel savings

NARCIS (Netherlands)

Berkel, van K.; Romers, L.H.J.; Vroemen, B.G.; Hofman, T.; Steinbuch, M.

2010-01-01

This paper presents a new design of a low-cost hybrid powertrain with large fuel savings. The hybrid powertrain contains only low-cost mechanical components, such as a flywheel module and a continuously variable transmission (CVT). Noelectrical motor/generator or battery is used. Based on

Providing strong Security and high privacy in low-cost RFID networks

DEFF Research Database (Denmark)

David, Mathieu; Prasad, Neeli R.

2009-01-01

Since the dissemination of Radio Frequency IDentification (RFID) tags is getting larger and larger, the requirement for strong security and privacy is also increasing. Low-cost and ultra-low-cost tags are being implemented on everyday products, and their limited resources constraints the security...

A GIS-based assessment of the suitability of SCIAMACHY satellite sensor measurements for estimating reliable CO concentrations in a low-latitude climate.

Science.gov (United States)

Fagbeja, Mofoluso A; Hill, Jennifer L; Chatterton, Tim J; Longhurst, James W S

2015-02-01

An assessment of the reliability of the Scanning Imaging Absorption Spectrometer for Atmospheric Cartography (SCIAMACHY) satellite sensor measurements to interpolate tropospheric concentrations of carbon monoxide considering the low-latitude climate of the Niger Delta region in Nigeria was conducted. Monthly SCIAMACHY carbon monoxide (CO) column measurements from January 2,003 to December 2005 were interpolated using ordinary kriging technique. The spatio-temporal variations observed in the reliability were based on proximity to the Atlantic Ocean, seasonal variations in the intensities of rainfall and relative humidity, the presence of dust particles from the Sahara desert, industrialization in Southwest Nigeria and biomass burning during the dry season in Northern Nigeria. Spatial reliabilities of 74 and 42 % are observed for the inland and coastal areas, respectively. Temporally, average reliability of 61 and 55 % occur during the dry and wet seasons, respectively. Reliability in the inland and coastal areas was 72 and 38 % during the wet season, and 75 and 46 % during the dry season, respectively. Based on the results, the WFM-DOAS SCIAMACHY CO data product used for this study is therefore relevant in the assessment of CO concentrations in developing countries within the low latitudes that could not afford monitoring infrastructure due to the required high costs. Although the SCIAMACHY sensor is no longer available, it provided cost-effective, reliable and accessible data that could support air quality assessment in developing countries.

Automated packaging platform for low-cost high-performance optical components manufacturing

Science.gov (United States)

Ku, Robert T.

2004-05-01

Delivering high performance integrated optical components at low cost is critical to the continuing recovery and growth of the optical communications industry. In today's market, network equipment vendors need to provide their customers with new solutions that reduce operating expenses and enable new revenue generating IP services. They must depend on the availability of highly integrated optical modules exhibiting high performance, small package size, low power consumption, and most importantly, low cost. The cost of typical optical system hardware is dominated by linecards that are in turn cost-dominated by transmitters and receivers or transceivers and transponders. Cost effective packaging of optical components in these small size modules is becoming the biggest challenge to be addressed. For many traditional component suppliers in our industry, the combination of small size, high performance, and low cost appears to be in conflict and not feasible with conventional product design concepts and labor intensive manual assembly and test. With the advent of photonic integration, there are a variety of materials, optics, substrates, active/passive devices, and mechanical/RF piece parts to manage in manufacturing to achieve high performance at low cost. The use of automation has been demonstrated to surpass manual operation in cost (even with very low labor cost) as well as product uniformity and quality. In this paper, we will discuss the value of using an automated packaging platform.for the assembly and test of high performance active components, such as 2.5Gb/s and 10 Gb/s sources and receivers. Low cost, high performance manufacturing can best be achieved by leveraging a flexible packaging platform to address a multitude of laser and detector devices, integration of electronics and handle various package bodies and fiber configurations. This paper describes the operation and results of working robotic assemblers in the manufacture of a Laser Optical Subassembly

Costs of mixed low-level waste stabilization options

International Nuclear Information System (INIS)

Schwinkendorf, W.E.; Cooley, C.R.

1998-01-01

Selection of final waste forms to be used for disposal of DOE's mixed low-level waste (MLLW) depends on the waste form characteristics and total life cycle cost. In this paper the various cost factors associated with production and disposal of the final waste form are discussed and combined to develop life-cycle costs associated with several waste stabilization options. Cost factors used in this paper are based on a series of treatment system studies in which cost and mass balance analyses were performed for several mixed low-level waste treatment systems and various waste stabilization methods including vitrification, grout, phosphate bonded ceramic and polymer. Major cost elements include waste form production, final waste form volume, unit disposal cost, and system availability. Production of grout costs less than the production of a vitrified waste form if each treatment process has equal operating time (availability) each year; however, because of the lower volume of a high temperature slag, certification and handling costs and disposal costs of the final waste form are less. Both the total treatment cost and life cycle costs are higher for a system producing grout than for a system producing high temperature slag, assuming equal system availability. The treatment costs decrease with increasing availability regardless of the waste form produced. If the availability of a system producing grout is sufficiently greater than a system producing slag, then the cost of treatment for the grout system will be less than the cost for the slag system, and the life cycle cost (including disposal) may be less depending on the unit disposal cost. Treatment and disposal costs will determine the return on investment in improved system availability

Low Cost Night Vision System for Intruder Detection

Science.gov (United States)

Ng, Liang S.; Yusoff, Wan Azhar Wan; R, Dhinesh; Sak, J. S.

2016-02-01

The growth in production of Android devices has resulted in greater functionalities as well as lower costs. This has made previously more expensive systems such as night vision affordable for more businesses and end users. We designed and implemented robust and low cost night vision systems based on red-green-blue (RGB) colour histogram for a static camera as well as a camera on an unmanned aerial vehicle (UAV), using OpenCV library on Intel compatible notebook computers, running Ubuntu Linux operating system, with less than 8GB of RAM. They were tested against human intruders under low light conditions (indoor, outdoor, night time) and were shown to have successfully detected the intruders.

[Description and evaluation of creative thinking in preterm low birth weight infants].

Science.gov (United States)

Parisi, L; Di Filippo, T; Firrigno, L; La Grutta, S; Testa, D; Roccella, M

2007-04-01

Since the 1950s, the problem of how to evaluate creativity has been addressed in studies on the definition of measurement criteria and on the relationship between intelligence and creative thinking. Many revealed cognitive and relational disorders in preterm infants, particularly in preterm very low birth weight infants (birth weight 2500 g. The test battery included: Torrance Test of Creative Thinking (TCTT); WISC-R intelligence test; Goodenough Human Figure Drawing Test. Statistical analysis (Mann-Whitney U test) showed a statistically significant difference (P>0.05) between the 2 groups; scores for figure originality, figure fluidity and figure elaboration were consistently higher in the control group. Within the low birth weight group, there was a significant correlation (Spearman r) between verbal IQ and verbal fluidity and verbal flexibility subscale scores and between IQ performance and figure elaboration. Scores on the figure drawing tests showed higher creative ability in the control group. In children born preterm with low birth weight, emotive dynamics and flow of affection may influence the channels of communication between child and family. The low figure originality subscale scores support the hypothesis that psychodynamic and relational factors (worry about the preterm condition, overprotective behaviour by parents and others) could lead to diminished autonomy, flexibility and manipulatory interest in the child.

Microinsurance: innovations in low-cost health insurance.

Science.gov (United States)

Dror, David M; Radermacher, Ralf; Khadilkar, Shrikant B; Schout, Petra; Hay, François-Xavier; Singh, Arbind; Koren, Ruth

2009-01-01

Microinsurance--low-cost health insurance based on a community, cooperative, or mutual and self-help arrangements-can provide financial protection for poor households and improve access to health care. However, low benefit caps and a low share of premiums paid as benefits--both designed to keep these arrangements in business--perversely limited these schemes' ability to extend coverage, offer financial protection, and retain members. We studied three schemes in India, two of which are member-operated and one a commercial scheme, using household surveys of insured and uninsured households and interviews with managers. All three enrolled poor households and raised their use of hospital services, as intended. Financial exposure was greatest, and protection was least, in the commercial scheme, which imposed the lowest caps on benefits and where income was the lowest.

A Low-Cost, High-Precision Navigator, Phase II

Data.gov (United States)

National Aeronautics and Space Administration — Toyon Research Corporation proposes to develop and demonstrate a prototype low-cost precision navigation system using commercial-grade gyroscopes and accelerometers....

Low-level waste disposal technology

International Nuclear Information System (INIS)

Levin, G.B.

1983-01-01

A design has been proposed for a low-level radioactive waste disposal site that should provide the desired isolation under all foreseeable conditions. Although slightly more costly than current practices; this design provides additional reliability. This reliability is desirable to contribute to the closure of the fuel cycle and to demonstrate the responsible management of the uranium cycle by reestablishing confidence in the system

Low-cost Photoacoustic-based Measurement System for Carbon Dioxide Fluxes with the Potential for large-scale Monitoring

Science.gov (United States)

Scholz, L. T.; Bierer, B.; Ortiz Perez, A.; Woellenstein, J.; Sachs, T.; Palzer, S.

2016-12-01

The determination of carbon dioxide (CO2) fluxes between ecosystems and the atmosphere is crucial for understanding ecological processes on regional and global scales. High quality data sets with full uncertainty estimates are needed to evaluate model simulations. However, current flux monitoring techniques are unsuitable to provide reliable data of a large area at both a detailed level and an appropriate resolution, at best in combination with a high sampling rate. Currently used sensing technologies, such as non-dispersive infrared (NDIR) gas analyzers, cannot be deployed in large numbers to provide high spatial resolution due to their costs and complex maintenance requirements. Here, we propose a novel CO2 measurement system, whose gas sensing unit is made up of low-cost, low-power consuming components only, such as an IR-LED and a photoacoustic detector. The sensor offers a resolution of sensor response of just a few seconds. Since the sensor can be applied in-situ without special precautions, it allows for environmental monitoring in a non-invasive way. Its low energy consumption enables long-term measurements. The low overall costs favor the manufacturing in large quantities. This allows the operation of multiple sensors at a reasonable price and thus provides concentration measurements at any desired spatial coverage and at high temporal resolution. With appropriate 3D configuration of the units, vertical and horizontal fluxes can be determined. By applying a closely meshed wireless sensor network, inhomogeneities as well as CO2 sources and sinks in the lower atmosphere can be monitored. In combination with sensors for temperature, pressure and humidity, our sensor paves the way towards the reliable and extensive monitoring of ecosystem-atmosphere exchange rates. The technique can also be easily adapted to other relevant greenhouse gases.

Low Cost Vision Based Personal Mobile Mapping System

Science.gov (United States)

Amami, M. M.; Smith, M. J.; Kokkas, N.

2014-03-01

Mobile mapping systems (MMS) can be used for several purposes, such as transportation, highway infrastructure mapping and GIS data collecting. However, the acceptance of these systems is not wide spread and their use is still limited due the high cost and dependency on the Global Navigation Satellite System (GNSS). A low cost vision based personal MMS has been produced with an aim to overcome these limitations. The system has been designed to depend mainly on cameras and use of low cost GNSS and inertial sensors to provide a bundle adjustment solution with initial values. The system has the potential to be used indoor and outdoor. The system has been tested indoors and outdoors with different GPS coverage, surrounded features, and narrow and curvy paths. Tests show that the system is able to work in such environments providing 3D coordinates of better than 10 cm accuracy.

Low Cost Vision Based Personal Mobile Mapping System

Directory of Open Access Journals (Sweden)

M. M. Amami

2014-03-01

Full Text Available Mobile mapping systems (MMS can be used for several purposes, such as transportation, highway infrastructure mapping and GIS data collecting. However, the acceptance of these systems is not wide spread and their use is still limited due the high cost and dependency on the Global Navigation Satellite System (GNSS. A low cost vision based personal MMS has been produced with an aim to overcome these limitations. The system has been designed to depend mainly on cameras and use of low cost GNSS and inertial sensors to provide a bundle adjustment solution with initial values. The system has the potential to be used indoor and outdoor. The system has been tested indoors and outdoors with different GPS coverage, surrounded features, and narrow and curvy paths. Tests show that the system is able to work in such environments providing 3D coordinates of better than 10 cm accuracy.

Comparative investigation of indicators of growth and behavioral disorders in children with normal, low, and very low birth weight at pre-school age in Isfahan during 2015

Directory of Open Access Journals (Sweden)

Marzieh Yousefi

2017-01-01

Full Text Available Introduction: Birth weight is one of the most important indicators of infant's health and could predict their health condition in future. This study was conducted to determine and compare indicators of growth [weight, height, and body mass index (BMI] and behavioral disorders in children with normal, low, and very low birth weight at pre-school age. Materials and Methods: In this descriptive analytical study, 236 children (126 with normal weight, 100 with low birth weight, and 10 with very low birth weight at pre-school age were investigated in three groups. Data collection tools were a two-part questionnaire including the Rutter Children Behavior Questionnaire for parents, and parents' and children's demographic characteristics questionnaire, scale, and stadiometer. Data were analyzed using descriptive statistics, variance analysis, Chi square, and Kruskal–Wallis tests. Results: The mean of weight, height, and BMI at pre-school age in three groups had a significant difference (P = 0.009 and it was lower in the group with very low birth weight than the other two groups; however, the difference between the group with normal birth weight and the group with low birth weight was not significant (P = 0.10. The mean score of behavioral disorder had no significant difference between groups (P = 0.49. Conclusions: Results showed that children with very low birth weight grew less than the other two groups. Therefore, this group needs special attention and long-term follow-up for taking care of them to ensure better growth. It is recommended to conduct more extended studies to evaluate behavioral disorders in these children.

Cognitive function and MRI findings in very low birth weight infants

International Nuclear Information System (INIS)

Imamura, Atsuko; Takagishi, Yuka; Takada, Satoru; Uetani, Yoshiyuki; Nakamura, Toru; Nakamura, Hajime; Inagaki, Yuko.

1996-01-01

Twenty-two very low birth weight infants at preschool ages of 5-6 years were studied to clarify the correlation between cognitive function and MRI findings. Cognitive function was evaluated by the Wechsler Intelligence Scale for Children-Revised (WISC-R) and the Frostig developmental test of visual perception. Ventricular enlargement, assessed by the bioccipital index (B.I.) measured on MRI, was correlated to cognitive disorders. Children with periventricular high intensity areas (T 2 -weighted images) extending from the posterior periventricular region to the parietal lobe tend to highly suffer from cerebral palsy and visuoperceptual impairment. These results indicate that the disorders of cognitive function in very low birth weight infants were caused by a damage of association fibers in periventricular areas which was detectable by MRI. (author)

Low Cost Al-Si Casting Alloy As In-Situ Composite for High Temperature Applications

Science.gov (United States)

Lee, Jonathan A.

2000-01-01

A new aluminum-silicon (Al-Si) alloy has been successfully developed at NASA- Marshall Space Flight Center (MSFC) that has significant improvement in tensile and fatigue strength at elevated temperatures (500 F-700 F). The alloy offers a number of benefits such as light weight, high hardness, low thermal expansion and high surface wear resistance. In hypereutectic form, this alloy is considered as an in-situ Al-Si composite with tensile strength of about 90% higher than the auto industry 390 alloy at 600 F. This composite is very economically produced by using either conventional permanent steel molds or die casting. The projected material cost is less than $0.90 per pound, and automotive components such as pistons can be cast for high production rate using conventional casting techniques with a low and fully accounted cost. Key Words: Metal matrix composites, In-situ composite, aluminum-silicon alloy, hypereutectic alloy, permanent mold casting, die casting.

Investigation of low glass transition temperature on COTS PEM's reliability for space applications

Science.gov (United States)

Sandor, M.; Agarwal, S.; Peters, D.; Cooper, M. S.

2003-01-01

Plastic Encapsulated Microelectronics (PEM) reliability is affected by many factors. Glass transition temperature (Tg) is one such factor. In this presentation issues relating to PEM reliability and the effect of low glass transition temperature epoxy mold compounds are presented.

goGPS: open source software for enhancing the accuracy of low-cost receivers by single-frequency relative kinematic positioning

International Nuclear Information System (INIS)

Realini, Eugenio; Reguzzoni, Mirko

2013-01-01

goGPS is a free and open source satellite positioning software package aiming to provide a collaborative platform for research and teaching purposes. It was first published in 2009 and since then several related projects are on-going. Its objective is the investigation of strategies for enhancing the accuracy of low-cost single-frequency GPS receivers, mainly by relative positioning with respect to a base station and by a tailored extended Kalman filter working directly on code and phase observations. In this paper, the positioning algorithms implemented in goGPS are presented, emphasizing the modularity of the software design; two specific strategies to support the navigation with low-cost receivers are also proposed and discussed, namely an empirical observation weighting function calibrated on the receiver signal-to-noise ratio and the inclusion of height information from a digital terrain model as an additional observation in the Kalman filter. The former is crucial when working with high-sensitivity receivers, while the latter can significantly improve the positioning in the vertical direction. The overall goGPS positioning accuracy is assessed by comparison with a dual-frequency receiver and with the positioning computed by a standard low-cost receiver. The benefits of the calibrated weighting function and the digital terrain model are investigated by an experiment in a dense urban environment. It comes out that the use of goGPS and low-cost receivers leads to results comparable with those obtained by higher level receivers; goGPS has good performances also in a dense urban environment, where its additional features play an important role. (paper)

Fundamental understanding and development of low-cost, high-efficiency silicon solar cells

Energy Technology Data Exchange (ETDEWEB)

ROHATGI,A.; NARASIMHA,S.; MOSCHER,J.; EBONG,A.; KAMRA,S.; KRYGOWSKI,T.; DOSHI,P.; RISTOW,A.; YELUNDUR,V.; RUBY,DOUGLAS S.

2000-05-01

The overall objectives of this program are (1) to develop rapid and low-cost processes for manufacturing that can improve yield, throughput, and performance of silicon photovoltaic devices, (2) to design and fabricate high-efficiency solar cells on promising low-cost materials, and (3) to improve the fundamental understanding of advanced photovoltaic devices. Several rapid and potentially low-cost technologies are described in this report that were developed and applied toward the fabrication of high-efficiency silicon solar cells.

FED-R2: concept and magnet design of a low-cost FED

International Nuclear Information System (INIS)

Williams, J.E.C.; Becker, H.; Blackfield, D.; Bobrov, E.; Bromberg, L.; Cohn, D.R.; Diatchenko, N.; LeClaire, R.

1982-12-01

High performance resistive magnet technology was used to develop a design for a compact, low cost version of the fusion engineering device FED. We refer to this design as FED-R2, for FED-resistive magnet design 2 to distinguish it from the larger resistive magnet design for FED which uses demountable coils (FED-R1). The main objectives of FED-R2 are: (1) to demonstrate reliable, quasi-steady state (long pulse, high duty factor) operation with Q/sub p/ approx. 5; (2) to demonstrate Q/sub p/ > 5 operation for a limited number of pulses; (3) to provide high neutron flux for irradiation of nuclear test modules with a total area greater tha 20m 2 ; (4) to utilize steady-state RF current drive if this option appears promising. Based upon the costing codes at the Fusion Engineering Design Center and upon TFTR costs, the estimated direct costs of FED-R2 would be on the range 380 to 460M, a factor of about 2 below that of the baseline FED design

Low-cost low-enthalpy geothermal heat for freshwater production: Innovative applications using thermal desalination processes

KAUST Repository

Bundschuh, Jochen; Ghaffour, NorEddine; Mahmoudi, Hacè ne; Goosen, Mattheus F A; Mushtaq, Shahbaz; Hoinkis, Jan

2015-01-01

The study is dedicated to exploring different types of low-cost low-enthalpy geothermal and their potential integration with conventional thermal-based water desalination and treatment technologies to deliver energy efficient, environmentally friendly solutions for water desalination and treatment, addressing global water crises. Our in-depth investigation through reviews of various low-enthalpy geothermal and conventional thermal-based technologies suggest that the geothermal option is superior to the solar option if low-cost geothermal heat is available because it provides a constant heat source in contrast to solar. Importantly, the stable heat source further allows up-scaling (> 1000 m3/day), which is not currently possible with solar. Solar-geothermal hybrid constellations may also be suitable in areas where both sources are available. The review also discovers that the innovative Membrane distillation (MD) process is very promising as it can be used for many different water compositions, salinity and temperature ranges. Either the geothermal water itself can be desalinated/treated or the geothermal heat can be used to heat feed water from other sources using heat exchangers. However, there are only few economic analyses for large-scale MD units and these are based on theoretical models using often uncertain assumptions resulting in a large variety of results.

Low-cost low-enthalpy geothermal heat for freshwater production: Innovative applications using thermal desalination processes

KAUST Repository

Bundschuh, Jochen

2015-03-01

The study is dedicated to exploring different types of low-cost low-enthalpy geothermal and their potential integration with conventional thermal-based water desalination and treatment technologies to deliver energy efficient, environmentally friendly solutions for water desalination and treatment, addressing global water crises. Our in-depth investigation through reviews of various low-enthalpy geothermal and conventional thermal-based technologies suggest that the geothermal option is superior to the solar option if low-cost geothermal heat is available because it provides a constant heat source in contrast to solar. Importantly, the stable heat source further allows up-scaling (> 1000 m3/day), which is not currently possible with solar. Solar-geothermal hybrid constellations may also be suitable in areas where both sources are available. The review also discovers that the innovative Membrane distillation (MD) process is very promising as it can be used for many different water compositions, salinity and temperature ranges. Either the geothermal water itself can be desalinated/treated or the geothermal heat can be used to heat feed water from other sources using heat exchangers. However, there are only few economic analyses for large-scale MD units and these are based on theoretical models using often uncertain assumptions resulting in a large variety of results.

Low-Cost High-Performance MRI

Science.gov (United States)

Sarracanie, Mathieu; Lapierre, Cristen D.; Salameh, Najat; Waddington, David E. J.; Witzel, Thomas; Rosen, Matthew S.

2015-10-01

Magnetic Resonance Imaging (MRI) is unparalleled in its ability to visualize anatomical structure and function non-invasively with high spatial and temporal resolution. Yet to overcome the low sensitivity inherent in inductive detection of weakly polarized nuclear spins, the vast majority of clinical MRI scanners employ superconducting magnets producing very high magnetic fields. Commonly found at 1.5-3 tesla (T), these powerful magnets are massive and have very strict infrastructure demands that preclude operation in many environments. MRI scanners are costly to purchase, site, and maintain, with the purchase price approaching $1 M per tesla (T) of magnetic field. We present here a remarkably simple, non-cryogenic approach to high-performance human MRI at ultra-low magnetic field, whereby modern under-sampling strategies are combined with fully-refocused dynamic spin control using steady-state free precession techniques. At 6.5 mT (more than 450 times lower than clinical MRI scanners) we demonstrate (2.5 × 3.5 × 8.5) mm3 imaging resolution in the living human brain using a simple, open-geometry electromagnet, with 3D image acquisition over the entire brain in 6 minutes. We contend that these practical ultra-low magnetic field implementations of MRI (standards for affordable (<$50,000) and robust portable devices.

OBSERVATION ON INCREASE IN WEIGHT OF LOW BIRTH WEIGHT (LBW) BABIES BY IMPLEMENTING KANGAROO MOTHER CARE (KMC) TECHNIQUE

OpenAIRE

Purnendu Kumar Singh; Kumar Amritanshu; Bijoy Mukherjee

2014-01-01

Kangaroo Mother Care (KMC) is a practical technique for nursing of low birth weight babies by direct skin to contact with the mother. This study was undertaken to observe and record the effect of KMC with focus on increase in weight of at term low birth weight (LBW) babies weighing less than 2000 grams. The study was conducted over thirty six month’s period from July 2011 to June 2014. The method of care consisted of skin to skin contact between the mother and the infant along ...

BiliLED low cost neonatal phototherapy, from prototype to industry

Energy Technology Data Exchange (ETDEWEB)

Geido, Daniel; Failache, Horacio [Instituto de Fisica de la Facultad de Ingenieria - Universidad de la Republica, Montevideo (Uruguay); Simini, Franco [Nucleo de Ingenieria Biomedica de las Facultades de Medicina e Ingenieria (Uruguay); Hospital de ClInicas. Av Italia S/N. Piso 15 sala 2, 11600 Montevideo (Uruguay)

2007-11-15

BiliLED is a phototherapy instrument designed to reduce bilirrubin blood rates in new born babies with jaundice. The light source is centred at 470 nm with a bandwidth of 35 nm and includes a matrix of 196 (14x14) InGaN LEDs. The optical elements are designed to maximize the light intensity useful for treatment, with a small number of LEDs in a compact and low cost unit. The optic array is such that every LED illuminates all the treatment area, which ensures redundancy and, thus, a high reliability not to be found in single-lamp instruments. Thermal dissipation and cost of BiliLED are both an order-of-magnitude smaller than conventional therapy lamps. BiliLED adjusts coetaneous irradiation with a feedback loop to compensate the loss or aging of LEDs achieving a calibrated light source for over a decade of use. A clinical trial in 20 hyperbilirrubinaemia patients shows 16% bilirrubin degradation within 24 hours of treatment, higher than most lamp phototherapy instruments. The steps from prototype to commercial model are described.

BiliLED low cost neonatal phototherapy, from prototype to industry

Science.gov (United States)

Geido, Daniel; Failache, Horacio; Simini, Franco

2007-11-01

BiliLED is a phototherapy instrument designed to reduce bilirrubin blood rates in new born babies with jaundice. The light source is centred at 470 nm with a bandwidth of 35 nm and includes a matrix of 196 (14×14) InGaN LEDs. The optical elements are designed to maximize the light intensity useful for treatment, with a small number of LEDs in a compact and low cost unit. The optic array is such that every LED illuminates all the treatment area, which ensures redundancy and, thus, a high reliability not to be found in single-lamp instruments. Thermal dissipation and cost of BiliLED are both an order-of-magnitude smaller than conventional therapy lamps. BiliLED adjusts coetaneous irradiation with a feedback loop to compensate the loss or aging of LEDs achieving a calibrated light source for over a decade of use. A clinical trial in 20 hyperbilirrubinaemia patients shows 16% bilirrubin degradation within 24 hours of treatment, higher than most lamp phototherapy instruments. The steps from prototype to commercial model are described.

BiliLED low cost neonatal phototherapy, from prototype to industry

International Nuclear Information System (INIS)

Geido, Daniel; Failache, Horacio; Simini, Franco

2007-01-01

BiliLED is a phototherapy instrument designed to reduce bilirrubin blood rates in new born babies with jaundice. The light source is centred at 470 nm with a bandwidth of 35 nm and includes a matrix of 196 (14x14) InGaN LEDs. The optical elements are designed to maximize the light intensity useful for treatment, with a small number of LEDs in a compact and low cost unit. The optic array is such that every LED illuminates all the treatment area, which ensures redundancy and, thus, a high reliability not to be found in single-lamp instruments. Thermal dissipation and cost of BiliLED are both an order-of-magnitude smaller than conventional therapy lamps. BiliLED adjusts coetaneous irradiation with a feedback loop to compensate the loss or aging of LEDs achieving a calibrated light source for over a decade of use. A clinical trial in 20 hyperbilirrubinaemia patients shows 16% bilirrubin degradation within 24 hours of treatment, higher than most lamp phototherapy instruments. The steps from prototype to commercial model are described

Maternal education level and low birth weight: A meta-analysis

Directory of Open Access Journals (Sweden)

Sonia Silvestrin

2013-07-01

Conclusions: The hypothesis of similarity between the extreme degrees of social distribution, translated by maternal education level in relation to the proportion of low birth weight, was not confirmed.

A low-cost and reliable technique to monitor the spread of an invasive seagrass in the Caribbean Sea

Science.gov (United States)

Jobsis, D.; Wyllie-Echeverria, S.

2016-02-01

In 2002 the seagrass Halophila stipulacea was observed in Grenada in the Eastern Caribbean Sea. Since then this invasive species has spread northward through the Lesser Antilles and Leeward Islands into the US Virgin Islands. There are native Halophila species as well as other seagrass species in Eastern Caribbean therefore it is essential to accurately identify H. stipulacea before an invasion event is reported. Moreover, because the consequences of H. stipulaceapresence and spread are not known in many locations, after accurate identification is made it is also important to map patch expansion as a first step in process studies designed to determine impact. We now report a low-cost (GoPro video camera placed inside underwater housing, a weighted towfish and a GPS tracking device. The camera, set in the time-lapse mode, is fixed to the towfish; Afterward using a series of straight line transects, our array is towed at low speeds while synched to GPS. The accuracy of an underwater video system is based on knowing the accurate position of seagrass on the seafloor during filming (Norris et al. 1997). After sampling images and their associated GPS coordinates are imported to a spreadsheet and coded such that H. stipulaceais related to a known position on the bottom. With this system we produce accurate maps that specifically identify H. stipulacea patches, regardless of water depth, on the seafloor. During our poster presentation we will show a series of images from 2015 sampling and display mapping results. Since the 2002 sighting in Grenada, H. stipulaceae has spread northward to nineteen Eastern Caribbean Islands (Williette et al 2014). Our technique will allow those charged with protecting natural resources to track the spread of this invasion and potentially provide an early warning system for islands nations not yet invaded.

Investment opportunity : the FPL low-cost solar dry kiln

Science.gov (United States)

George B. Harpole

1988-01-01

Two equations are presented that may be used to estimate a maximum investment limit and working capital requirements for the FPL low-cost solar dry kiln systems. The equations require data for drying cycle time, green lumber cost, and kiln-dried lumber costs. Results are intended to provide a preliminary estimate.

Estimates of Health Detriments and Tissue Weighting Factors for Hong Kong Populations from Low Dose, Low Dose Rate and Low LET Ionising Radiation Exposure

International Nuclear Information System (INIS)

Lee, S.K.

1998-01-01

The total health detriments and the tissue weighting factors for the Hong Kong populations from low dose, low dose rate and low LET ionising radiation exposure are obtained according to the methodology recommended in ICRP Publication 60. The probabilities of fatal cancers for the general (ages 0-90) and working (ages 20-64) populations due to lifetime exposure at low dose and low dose rate are 4.9 x 10 -2 Sv -1 and 3.6 x 10 -2 Sv -1 respectively, comparing with the ICRP 60 estimates of 5.0 x 10 -2 Sv -1 and 4.0 x 10 -2 Sv -1 . The corresponding total health detriments for the general and working populations are 6.9 x 10 -2 Sv -1 and 4.9 x 10 -2 Sv -1 respectively comparing with the ICRP 60 estimates of 7.3 x 10 -2 Sv -1 and 5.6 x 10 -2 Sv -1 . Tissue weighting factors for the general population are 0.01 (bone surface and skin), 0.02 (liver, oesophagus and thyroid), 0.04 (bladder and breast), 0.08 (remainder), 0.10 (stomach), 0.11 (bone marrow), 0.15 (colon), 0.19 (lung) and 0.21 (gonads) and for the working population are 0.01 (bone surface and skin), 0.03 (liver, oesophagus and thyroid), 0.04 (breast), 0.06 (remainder), 0.07 (bladder), 0.08 (colon), 0.14 (bone marrow and stomach), 0.16 (lung) and 0.20 (gonads). (author)

Regional differences in low birth weight in Spain: biological, demographic and socioeconomic variables.

Science.gov (United States)

Fuster, Vicente; Zuluaga, Pilar; Colantonio, S E; Román-Busto, J

2015-01-01

The geographic and demographic dimensions of Spain, in terms of surface and number of inhabitants, and its heterogeneous socioeconomic development offer an adequate opportunity to study the provincial differences in birth weight from 1996 to 2010, focusing on possible factors determining the relative frequency of low birth weight. The study analysed geographic differences with regard to biological, demographic and socioeconomic factors that interfere with the female reproductive pattern. The variables considered here were: birth order, proportion of premature deliveries, mother's age, multiparity, mother's country of origin and professional qualifications. Two periods (1996-2000 and 2006-2010) were compared by means of principal components analysis. An increase in the relative frequency of deliveries weighing less than 2500 g occurred in most of the 52 geographic units studied, differences being significant in 42. Only in five cases was there a non-significant reduction in the proportion of low weight births. The first component after principal component analysis indicated that low birth weight was positively related to maternal age and to multiple deliveries, and negatively to the mother's low professional qualification. The second component related positively to the incidence of premature deliveries and to non-Spanish status and negatively in the case of primiparous mothers. The progressive increase in low birth weight incidence observed in Spain from 1996 onwards has occurred with considerable variation in each province. In part, this diversity can be attributed to the unequal reproductive patterns of immigrant mothers.

Low-cost in vitro fertilization: current insights

Science.gov (United States)

Teoh, Pek Joo; Maheshwari, Abha

2014-01-01

Despite the development of in vitro fertilization (IVF) more than 30 years ago, the cost of treatment remains high. Furthermore, over the years, more sophisticated technologies and expensive medications have been introduced, making IVF increasingly inaccessible despite the increasing need. Globally, the option to undergo IVF is only available to a privileged few. In recent years, there has been growing interest in exploring strategies to reduce the cost of IVF treatment, which would allow the service to be provided in low-resource settings. In this review, we explore the various ways in which the cost of this treatment can be reduced. PMID:25187741

Testing the Feasibility of a Low-Cost Network Performance Measurement Infrastructure

Energy Technology Data Exchange (ETDEWEB)

Chevalier, Scott [Indiana Univ., Bloomington, IN (United States). International Networks; Schopf, Jennifer M. [Indiana Univ., Bloomington, IN (United States). International Networks; Miller, Kenneth [Pennsylvania State Univ., University Park, PA (United States). Telecommunications and Networking Services; Zurawski, Jason [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Energy Sciences Network

2016-07-01

Todays science collaborations depend on reliable, high performance networks, but monitoring the end-to-end performance of a network can be costly and difficult. The most accurate approaches involve using measurement equipment in many locations, which can be both expensive and difficult to manage due to immobile or complicated assets. The perfSONAR framework facilitates network measurement making management of the tests more reasonable. Traditional deployments have used over-provisioned servers, which can be expensive to deploy and maintain. As scientific network uses proliferate, there is a desire to instrument more facets of a network to better understand trends. This work explores low cost alternatives to assist with network measurement. Benefits include the ability to deploy more resources quickly, and reduced capital and operating expenditures. Finally, we present candidate platforms and a testing scenario that evaluated the relative merits of four types of small form factor equipment to deliver accurate performance measurements.

A Bluetooth Low Energy Indoor Positioning System with Channel Diversity, Weighted Trilateration and Kalman Filtering

Science.gov (United States)

Cantón Paterna, Vicente; Paradells Aspas, Josep; Pérez Bullones, María Alejandra

2017-01-01

Indoor Positioning Systems (IPS) using Bluetooth Low Energy (BLE) technology are currently becoming real and available, which has made them grow in popularity and use. However, there are still plenty of challenges related to this technology, especially in terms of Received Signal Strength Indicator (RSSI) fluctuations due to the behaviour of the channels and the multipath effect, that lead to poor precision. In order to mitigate these effects, in this paper we propose and implement a real Indoor Positioning System based on Bluetooth Low Energy, that improves accuracy while reducing power consumption and costs. The three main proposals are: frequency diversity, Kalman filtering and a trilateration method what we have denominated “weighted trilateration”. The analysis of the results proves that all the proposals improve the precision of the system, which goes up to 1.82 m 90% of the time for a device moving in a middle-size room and 0.7 m for static devices. Furthermore, we have proved that the system is scalable and efficient in terms of cost and power consumption. The implemented approach allows using a very simple device (like a SensorTag) on the items to locate. The system enables a very low density of anchor points or references and with a precision better than existing solutions. PMID:29258195

Morbidity in early adulthood among low-risk very low birth weight children in Turkey: a preliminary study.

Science.gov (United States)

Can, Gülay; Bilgin, Leyla; Tatli, Burak; Saydam, Reyhan; Coban, Asuman; Ince, Zeynep

2012-01-01

The objective of this study was to assess low-risk very low birth weight (VLBW) children, before the era of modern neonatal intensive care in Turkey, during adolescence. Forty-one VLBW adolescents were compared with 40 adolescents who had normal birth weight. The physical and neuromotor development, educational achievement and psychosocial status were assessed at a mean age of 17 +/- 1.6 years. VLBW adolescents were shorter than normal birth weight adolescents (p = 0.01). A major neurological abnormality (cerebral palsy) was seen in 12% and a minor neurological abnormality (tremor, coordination, behavioral and speech disorders) in 17%. VLBW adolescents had higher rates of visual problems (56% vs. 5%). School failure was present in 27%. There were no differences in behavioral problems or quality of life between the two groups, but VLBW adolescents did have a lower self-esteem score. Neurodevelopment and growth sequelae were a significant problem in VLBW adolescents. As early intervention might help to prevent or ameliorate potential problems, long-term follow-up is essential.

Low-cost wireless voltage & current grid monitoring

Energy Technology Data Exchange (ETDEWEB)

Hines, Jacqueline [SenSanna Inc., Arnold, MD (United States)

2016-12-31

This report describes the development and demonstration of a novel low-cost wireless power distribution line monitoring system. This system measures voltage, current, and relative phase on power lines of up to 35 kV-class. The line units operate without any batteries, and without harvesting energy from the power line. Thus, data on grid condition is provided even in outage conditions, when line current is zero. This enhances worker safety by detecting the presence of voltage and current that may appear from stray sources on nominally isolated lines. Availability of low-cost power line monitoring systems will enable widespread monitoring of the distribution grid. Real-time data on local grid operating conditions will enable grid operators to optimize grid operation, implement grid automation, and understand the impact of solar and other distributed sources on grid stability. The latter will enable utilities to implement eneygy storage and control systems to enable greater penetration of solar into the grid.

Mechanical design of a low cost parabolic solar dish concentrator

Directory of Open Access Journals (Sweden)

Hamza Hijazi

2016-03-01

Full Text Available The objective of this research was to design a low cost parabolic solar dish concentrator with small-to moderate size for direct electricity generation. Such model can be installed in rural areas which are not connected to governmental grid. Three diameters of the dish; 5, 10 and 20 m are investigated and the focal point to dish diameter ratio is set to be 0.3 in all studied cases. Special attention is given to the selection of the appropriate dimensions of the reflecting surfaces to be cut from the available sheets in the market aiming to reduce both cutting cost and sheets cost. The dimensions of the ribs and rings which support the reflecting surface are optimized in order to minimize the entire weight of the dish while providing the minimum possible total deflection and stresses in the beams. The study applies full stress analysis of the frame of the dish using Autodesk Inventor. The study recommends to use landscape orientation for the reflective facets and increase the ribs angle and the distance between the connecting rings. The methodology presented is robust and can be extended to larger dish diameters.

Cognitive function and MRI findings in very low birth weight infants

Energy Technology Data Exchange (ETDEWEB)

Imamura, Atsuko; Takagishi, Yuka; Takada, Satoru; Uetani, Yoshiyuki; Nakamura, Toru; Nakamura, Hajime [Kobe Univ. (Japan). School of Medicine; Inagaki, Yuko

1996-07-01

Twenty-two very low birth weight infants at preschool ages of 5-6 years were studied to clarify the correlation between cognitive function and MRI findings. Cognitive function was evaluated by the Wechsler Intelligence Scale for Children-Revised (WISC-R) and the Frostig developmental test of visual perception. Ventricular enlargement, assessed by the bioccipital index (B.I.) measured on MRI, was correlated to cognitive disorders. Children with periventricular high intensity areas (T{sub 2}-weighted images) extending from the posterior periventricular region to the parietal lobe tend to highly suffer from cerebral palsy and visuoperceptual impairment. These results indicate that the disorders of cognitive function in very low birth weight infants were caused by a damage of association fibers in periventricular areas which was detectable by MRI. (author)

Prevalence and risk factors affecting low birth weight in a district hospital at Perambalur, Tamilnadu

Directory of Open Access Journals (Sweden)

Rahul Hanumant Dandekar

2014-03-01

Full Text Available The low birth weight is an index of our status of public health in general and of maternal health and nutrition in particular. The major challenge in the field of public health is to identify the factors influencing low birth weight and to institute remedial measures. This hospital based cross-sectional study was conducted to know the prevalence and to identify risk factors affecting low birth weight in a District Hospital at Perambalur, Tamilnadu during six months period. All pregnant mothers who delivered babies in District Hospital were included in this study. Sample size 300 was calculated by taking 25% as the minimum prevalence of low birth weight with 20% permissible error. The statistical analysis was done by Epi Info™ 7 (7.1.2 software packages. The prevalence of LBW was found as 11.67% in 300 mothers while it was 21.5% in NFHS-3. Significant association was found between Low birth weight and weight gain in pregnancy. Though the prevalence of LBW is lower than national level, it is the need of the hour to strengthen the existing maternal services at the basic level of community.

Low glycemic index vegan or low-calorie weight loss diets for women with polycystic ovary syndrome: a randomized controlled feasibility study.

Science.gov (United States)

Turner-McGrievy, Gabrielle M; Davidson, Charis R; Wingard, Ellen E; Billings, Deborah L

2014-06-01

The aim of this randomized pilot was to assess the feasibility of a dietary intervention among women with polycystic ovary syndrome (PCOS) comparing a vegan to a low-calorie (low-cal) diet. Overweight (body mass index, 39.9 ± 6.1 kg/m(2)) women with PCOS (n = 18; age, 27.8 ± 4.5 years; 39% black) who were experiencing infertility were recruited to participate in a 6-month randomized weight loss study delivered through nutrition counseling, e-mail, and Facebook. Body weight and dietary intake were assessed at 0, 3, and 6 months. We hypothesized that weight loss would be greater in the vegan group. Attrition was high at 3 (39%) and 6 months (67%). All analyses were conducted as intention-to-treat and presented as median (interquartile range). Vegan participants lost significantly more weight at 3 months (-1.8% [-5.0%, -0.9%] vegan, 0.0 [-1.2%, 0.3%] low-cal; P = .04), but there was no difference between groups at 6 months (P = .39). Use of Facebook groups was significantly related to percent weight loss at 3 (P Vegan participants had a greater decrease in energy (-265 [-439, 0] kcal/d) and fat intake (-7.4% [-9.2%, 0] energy) at 6 months compared with low-cal participants (0 [0, 112] kcal/d, P = .02; 0 [0, 3.0%] energy, P = .02). These preliminary results suggest that engagement with social media and adoption of a vegan diet may be effective for promoting short-term weight loss among women with PCOS; however, a larger trial that addresses potential high attrition rates is needed to confirm these results. Copyright © 2014 Elsevier Inc. All rights reserved.

Randomized trial of BCG vaccination at birth to low-birth-weight children

DEFF Research Database (Denmark)

Aaby, Peter; Roth, Adam Anders Edvin; Ravn, Henrik

2011-01-01

Observational studies have suggested that BCG may have nonspecific beneficial effects on survival. Low-birth-weight (LBW) children are not given BCG at birth in Guinea-Bissau; we conducted a randomized trial of BCG at birth (early BCG) vs delayed BCG.......Observational studies have suggested that BCG may have nonspecific beneficial effects on survival. Low-birth-weight (LBW) children are not given BCG at birth in Guinea-Bissau; we conducted a randomized trial of BCG at birth (early BCG) vs delayed BCG....

Low molecular weight heparin versus unfractionated heparin in the initial treatment of venous thromboembolism

NARCIS (Netherlands)

Hettiarachchi, R. J.; Prins, M. H.; Lensing, A. W.; Buller, H. R.

1998-01-01

In this review, we analyze data from randomized trials in which low molecular weight heparin was compared with unfractionated heparin, both to estimate the treatment effect of low molecular weight heparin in the initial treatment of venous thromboembolism and to evaluate the effect of the varied

The low-cost microwave plasma sources for science and industry applications

Science.gov (United States)

Tikhonov, V. N.; Aleshin, S. N.; Ivanov, I. A.; Tikhonov, A. V.

2017-11-01

Microwave plasma torches proposed in the world market are built according to a scheme that can be called classical: power supply - magnetron head - microwave isolator with water load - reflected power meter - matching device - actual plasma torch - sliding short circuit. The total cost of devices from this list with a microwave generator of 3 kW in the performance, for example, of SAIREM (France), is about 17,000 €. We have changed the classical scheme of the microwave plasmathrone and optimised design of the waveguide channel. As a result, we can supply simple and reliable sources of microwave plasma (complete with our low-budget microwave generator up to 3 kW and a simple plasmathrone of atmospheric pressure) at a price from 3,000 €.

PEM Low Cost Endplates. Final report

Energy Technology Data Exchange (ETDEWEB)

Nielsen, Martin; Clyens, S.; Steenstrup, F.R.; Christiansen, Jens [Danish Technological Institute. Plastics Technology, Taastrup (Denmark); Yde-Andersen, S. [IRD Fuel Cell A/S, Svendborg (Denmark)

2013-03-15

In the project, an endplate for the PEM-type fuel cells has been developed. The initial idea was to use an injection mouldable fibre reinforced polymer to produce the endplate and thereby exploit the opportunities of greater geometrical freedom to reduce weight and material consumption. Different PPS/glass-fibre compounds were produced and tested in order to use the results to optimize the results on the computer through FEM simulations. As it turned out, it was impossible to achieve adequate stiffness for the endplates within the given geometrical limitations. At the relatively high temperatures at which the endplates operate the material simply goes to soft. Material focus shifted to fibre reinforced high strength concrete composite. Test specimens were produced and tested so the results again could be used for FEM-simulations which also accounted for the technical limitations the concrete composite has regarding casting ability. In the process, the way the endplate is mounted was also alternated to better accommodate the properties of the concrete composite. A number of endplates were cast in specially produced moulds in order to map the optimum process parameters, and a final endplate was tested at IRD Fuel Cells A/S. The field test was in many aspects successful. However, the gas sealing and the surface finish can be further improved. The weight may still be an issue for some applications, even though it is lower than the endplate currently used. This issue can be addressed in a future project. The work has resulted in a new endplate design, which makes the stack assembly simpler and with fewer components. The endplates fabrication involves low cost methods, which can be scaled up as demand of fuel cells begin to take off. (Author)

Low molecular-weight phenols in Tannat wines made by alternative winemaking procedures.

Science.gov (United States)

Favre, Guzmán; Peña-Neira, Álvaro; Baldi, Cecilia; Hernández, Natalia; Traverso, Sofía; Gil, Graciela; González-Neves, Gustavo

2014-09-01

Low molecular weight phenols of Tannat red wines produced by Traditional Maceration (TM), Prefermentative Cold Maceration (PCM), Maceration Enzyme (ENZ) and grape-Seed Tannins additions (ST), were performed and discussed. Alternatives to TM increased wine phenolic contents but unequally, ST increased mainly smaller flavans-3-ol, PCM anthocyanins and ENZ proanthocyanidins (up to 2250 mg/L). However low molecular weight flavan-3-ols remained below 9 mg/L in all wines, showing that there is not necessarily a correspondence between wine richness in total tannins and flavan-3-ols contents at low molecular weight. PCM wines had particularly high concentrations of tyrosol and tryptophol, yeast metabolism derived compounds. The use of grape-seed enological tannins did not increase grape seed derived phenolic compounds such as gallic acid. Caftaric acid was found in concentrations much higher than those reported in other grape varieties. Wine phenolic content and composition was considerably affected by the winemaking procedures tested. Copyright © 2014 Elsevier Ltd. All rights reserved.

Low-cost, locally available shelters in Pakistan

Directory of Open Access Journals (Sweden)

Ammarah Mubarak

2017-06-01

Full Text Available Flooding in 2010 affected 18 million people in Pakistan. With declining donor funds and flooding again in 2011 and 2012, the humanitarian community required low-cost solutions that could be scaled up to meet both the immediate and the transitional needs of large populations in differing geographical areas.

Clinical effects of low-molecular-weight heparin combined with ...

African Journals Online (AJOL)

Purpose: To explore the clinical effects of low-molecular-weight heparin (LMWH) combined with ulinastatin (UTI) in children with acute pancreatitis. Methods: In total, 560 patients with severe acute pancreatitis treated at Binzhou People's Hospital, Shandong, China, from April 2012 to June 2014 were enrolled in this study.

Sequential Low Cost Interventions Double Hand Hygiene Rates ...

African Journals Online (AJOL)

Sequential Low Cost Interventions Double Hand Hygiene Rates Among Medical Teams in a Resource Limited Setting. Results of a Hand Hygiene Quality Improvement Project Conducted At University Teaching Hospital of Kigali (Chuk), Kigali, Rwanda.

Periodontal infection as a risk factor for preterm low birth weight

Directory of Open Access Journals (Sweden)

Gandhimadhi D

2010-01-01

Full Text Available Introduction: There is an overwhelming body of evidence strongly suggesting that periodontal infection may have a significant negative impact on pregnancy outcome in some women. The aim of this study was to determine the association, if any, between periodontal disease and preterm low birth weight. Materials and Methods : A total of 211 mothers between the ages of 17 and 35 were grouped into two categories based on the gestational age and weight of the baby as cases (< 37 weeks, < 2500 g and controls (>37 weeks, >2500 g. Relevant obstetric history and information on other primary risk factors for preterm low birth weight were obtained. Investigation reports on blood group, Rh factor and hemoglobin (Hb were also gathered. Oral assessments included: simplified oral hygiene index (OHI-S, gingival bleeding index, probing pocket depth and clinical attachment level (CAL. Results: Cases had significantly more attachment loss and probing pocket depth, poor oral hygiene, more percentage of sites with attachment loss (Extent and more mean attachment loss per site (Severity and less Hb than controls. The number of visits for prenatal care and the percentage of sites with CAL≥2mm (Extent 2 remained significant when compared to other variables. Conclusion: The study indicated that periodontal disease is a contributing factor for preterm low birth weight.

A high-performance, low-cost, leading edge discriminator

Indian Academy of Sciences (India)

Home; Journals; Pramana – Journal of Physics; Volume 65; Issue 2 ... commercial discriminators. A low-cost discriminator is an essential requirement of the GRAPES-3 experiment where a large number of discriminator channels are used.

Audit of Cardiac Surgery Outcomes for Low Birth Weight and Premature Infants.

Science.gov (United States)

Alarcon Manchego, Peter; Cheung, Michael; Zannino, Diana; Nunn, Russell; D'Udekem, Yves; Brizard, Christian

2018-01-01

The burden of disease associated with cardiac surgery in preterm and low birth weight infants is increasing. This retrospective study aimed to compare the mortality and morbidity of cardiac surgery in low birth weight and preterm infants with that of a case-matched normal population. This was a single-center audit of cardiac surgery interventions at a tertiary pediatric center in Melbourne, Australia. Subjects underwent intervention in the first 3 months of life and were preterm (<37 weeks' gestation) or <2500 g at birth. Subjects were case-matched with 2 controls of term gestation and appropriate birth weight with the same primary diagnosis and intervention. Principal outcomes were mortality and complications in the 6 months following intervention. A total of 513 participants were included for analysis in the 13-year study period. There was an increased risk of mortality (odds ratio 6.26; 95% confidence interval (3.19, 12.3)) and rate of complications (odds ratio 2.29; 95% confidence interval (1.38, 3.78)) in low birth weight and premature infants compared with the control population. Patients who did not survive were more likely to have required extracorporeal membrane oxygenation (relative risk [RR] 6.6, P < 0.001), developed postoperative sepsis (RR 2.6, P = 0.012), and undergone unplanned reintervention (RR 2.3, P < 0.001) compared with survivors. Preterm and low birth weight patients had twice the RR of developing complications and 6 times the risk of mortality in the 6 months following cardiac intervention compared with a matched population. Observed trends suggest delaying surgery in clinically stable infants beyond 35 weeks corrected gestational age and 2500-g weight may result in improved survival. Copyright © 2018 Elsevier Inc. All rights reserved.

Reliable low precision simulations in land surface models

Science.gov (United States)

Dawson, Andrew; Düben, Peter D.; MacLeod, David A.; Palmer, Tim N.

2017-12-01

Weather and climate models must continue to increase in both resolution and complexity in order that forecasts become more accurate and reliable. Moving to lower numerical precision may be an essential tool for coping with the demand for ever increasing model complexity in addition to increasing computing resources. However, there have been some concerns in the weather and climate modelling community over the suitability of lower precision for climate models, particularly for representing processes that change very slowly over long time-scales. These processes are difficult to represent using low precision due to time increments being systematically rounded to zero. Idealised simulations are used to demonstrate that a model of deep soil heat diffusion that fails when run in single precision can be modified to work correctly using low precision, by splitting up the model into a small higher precision part and a low precision part. This strategy retains the computational benefits of reduced precision whilst preserving accuracy. This same technique is also applied to a full complexity land surface model, resulting in rounding errors that are significantly smaller than initial condition and parameter uncertainties. Although lower precision will present some problems for the weather and climate modelling community, many of the problems can likely be overcome using a straightforward and physically motivated application of reduced precision.

development of low-cost educational materials for chemistry

African Journals Online (AJOL)

unesco

development of low-cost Chemistry materials from locally available materials. It finally lists the ... According to the World Bank discussion paper (3) large investments have been made to improve the .... official language in Ethiopia) and English.

Preschool abilities of children born preterm and low weight

Directory of Open Access Journals (Sweden)

Sasha A. Martínez-Espiet

2018-10-01

Full Text Available The purpose of this study was to evaluate the development among a group of pre-school children born premature and with low weight. We evaluated a group of four years old children; 20 children born prematurely and 20 children born after a full gestation and desired weight, using the Beery-Buktenica visual-motor integration test. We also administered the Ages and Stages Questionnaire (ASQ-3 development test to all 40 mothers. Statistical analysis was performed using student t test for independent groups. The group of children born prematurely scored significantly lower on tests measuring visual perception skills (µ1 83.65 ; µ2 93.7 (p = 0.0001, visual-motor integration (µ1 93.6 ; µ2 104.8 (p = 0.001 and fine motor (µ1 36.00 ; µ2 44.25 (p=0.033 (p = 0.033, when compared to the group of children born after a full term. This study suggests that premature low weight born children have lower performance in the sensory-motor development during the preschool years. These disadvantages go unnoticed and may represent future delays on school tasks that require these skills. It is important to promote an early assessment and environmental stimulation among this population even in the absence of risk indicators.

Pathways of job style and preterm low birth weight.

Science.gov (United States)

Salehi, Katayoun; Mahmoodi, Zohreh; Kabir, Kourosh; Dolatian, Mahrokh

2016-09-01

Preterm and low birth weight tend to occur as a direct result of prenatal risky behaviors, diseases, as well as fetal exposure to harmful social and environmental factors. The present study aimed to investigate the relationship between job style and preterm low birth weight. The present case-control study was conducted in the Kamali hospital, Teheran, Iran in 2014. Participants included 156 mothers having a gestational age of less than 37 weeks and infants weighing less than 2500 gm. Additionally, the control group consisted of 433 mothers with a gestational age of over 37 weeks and having infants weighing between 2500-4000 gm. The data were collected using the Mother's Lifestyle Scale (MLS) during pregnancy based on recognized social determinants of health and those developed by the researchers. The domain of the mother's job style was assessed using a questionnaire consisting of 18 items on topics such as working conditions, job satisfaction, and perceived employer empathy. Higher overall scores in this instrument indicate the mother's poorer job style. The data were analyzed using SPSS version 16 and Lisrel version 8.8 through a statistical path analysis. The model fit indices indicated that there was found to be high favorability, demonstrated that the model fit and that there were rational relationships (CFI=1, RMSEA=0.00), and showed that on the direct path that the mother's job style had the most adverse effect (B=-0.3) with weight gain during pregnancy showing the most positive effect (B=0.16) on PLBW. The mother's level of education was found to be the only variable that affected PLBW negatively in both the direct and indirect paths through the mother's job style and household income (B=-0.17). According the path analysis model, job style has a direct influence on preterm low birth weight. Thus, special consideration should be placed on aspects surrounding a mother's job situation in order to prevent any adverse effects.

Is obesity a risk factor for impaired cognition in young adults with low birth weight?

Science.gov (United States)

Lundgren, M; Morgården, E; Gustafsson, J

2014-10-01

Overweight and obesity are risk factors for cardiovascular disease. There is also an association between body mass index (BMI) and cognitive ability. Since low birth weight is associated with adult metabolic disease, particularly in obese subjects, the question emerges whether obesity has an additional negative effect on cognitive function in subjects with low birth weight. The aim was to analyse whether overweight or obesity influence intellectual performance in young adults with particular focus on those with a low birth weight. Data were collected from the Swedish Medical Birth Register on 620,834 males born between 1973 and 1988 and matched to results on intellectual performance and BMI at conscription. The risk for low intellectual performance was higher for those with high BMI compared to those with normal. The highest risk was found among subjects with low birth weight and overweight or obesity in young adulthood (odds ratios, 1.98 [1.73-2.22] and 2.59 [2.00-3.34], respectively). However, subjects with further high birth weight and a high BMI at conscription had no further increased risk. Overweight and obesity are associated with an increased risk of subnormal intellectual performance in young adult males. Subjects with low birth weight and adolescent overweight/obesity are at particular risk of subnormal performance. A high birth weight increases the risk for obesity, but a high adult BMI does not further increase the risk for subnormal performance. © 2013 The Authors. Pediatric Obesity © 2013 International Association for the Study of Obesity.

The Relationship between CO Ambient and Low Birth Weight

Directory of Open Access Journals (Sweden)

Alavi Majd H

2011-06-01

Full Text Available Background and Objectives: LBW is the strongest factor related to prenatal, neonatal, postnatal and childhood mortality and morbidity. Air pollution is one of the risk factors that is recently gaining attention. This study was carried out to determine the relationship between the CO ambient and low birth weight in women referring to Tehran hospitals in 2007-2008. Methods: In this historical cohort study 225 pregnant women having lived within 5 kilometers of a monitoring station during pregnancy and referring to selected hospitals in Tehran were investigated. An information questionnaire was used for data collection and sampling was done by multistage sampling and convenience method. Women were assigned to low exposure group and high exposure group based on mean exposure to each pollutant during pregnancy. These two groups were matched with respect to confounding factors. SPSS software version 15, T statistics, 2, Man Withnney, and Relative Risk procedures were used for data analysis.Results: The result showed that 31.6% of CO high exposure group and 7.4% of CO low exposure group had Low birth weight baby. The result also showed a significant relationship between exposure to high amount of CO and LBW (p=0.001. Relative Risk calculated with confidence interval (RR=4/67, CI=(1/76-9/43 was found to be 95% and the amount of attributable risk was 66%.Conclusion: Based on these finding, exposure to carbon monoxide pollution can cause LBW. There should be an educational program about the disadvantages of CO pollutant on pregnant women living in densely populated areas of the city. Moreover, practical approaches should be provided to reduce these pollutants.

PERFORMANCE ASSESSMENT OF INTEGRATED SENSOR ORIENTATION WITH A LOW-COST GNSS RECEIVER

Directory of Open Access Journals (Sweden)

M. Rehak

2017-08-01

Full Text Available Mapping with Micro Aerial Vehicles (MAVs whose weight does not exceed 5 kg is gaining importance in applications such as corridor mapping, road and pipeline inspections, or mapping of large areas with homogeneous surface structure, e.g. forest or agricultural fields. In these challenging scenarios, integrated sensor orientation (ISO improves effectiveness and accuracy. Furthermore, in block geometry configurations, this mode of operation allows mapping without ground control points (GCPs. Accurate camera positions are traditionally determined by carrier-phase GNSS (Global Navigation Satellite System positioning. However, such mode of positioning has strong requirements on receiver’s and antenna’s performance. In this article, we present a mapping project in which we employ a single-frequency, low-cost (< $100 GNSS receiver on a MAV. The performance of the low-cost receiver is assessed by comparing its trajectory with a reference trajectory obtained by a survey-grade, multi-frequency GNSS receiver. In addition, the camera positions derived from these two trajectories are used as observations in bundle adjustment (BA projects and mapping accuracy is evaluated at check points (ChP. Several BA scenarios are considered with absolute and relative aerial position control. Additionally, the presented experiments show the possibility of BA to determine a camera-antenna spatial offset, so-called lever-arm.

The neglected sociobehavioral risk factors of low birth weight

Directory of Open Access Journals (Sweden)

Mohsen Momeni

2016-08-01

Full Text Available Background: Low Birth Weight (LBW is one of the most important health indicators in the world. It has certain known and unknown causes. The present study was designed to evaluate the role of socio-behavioral factors on neonatal birth weight.Methods: The current case-control study was conducted on 300 eligible neonates (150 LBW infants as cases and 150 normal body weight infants as controls in 2015. The national pregnancy care forms of the neonates kept in heath care centers in Kerman were used. The data was analyzed running Independent samples t-test, Chi square test, and Fisher’s Exact test in SPSS. The significance level was set as 0.05.Results: Preterm birth (P<0.001, number of primary care during pregnancy (P=0.001, mother’s age (P=0.049, consumption of supplements during pregnancy (P=0.03, and history of substance abuse in mothers (P=0.03 were found to have significant roles in having LBW neonate.Conclusion: Identifying the sociobehavioral risk factors of Preterm labor and modifying them to prevent preterm birth are essential approaches to prevent LBW. Governments should pay special attention to nutritional status of teenage and young girls to have healthy mothers and babies in the future. Women of childbearing age should be screened and educated about risky behaviors. Pregnancy care and support should be delivered to all pregnant women according to the standard methods.Keywords: Low Birth Weight; Risk Factors; Behavior; Preterm Labor

Cost-effective and low-technology options for simulation and training in neonatology.

Science.gov (United States)

Bruno, Christie J; Glass, Kristen M

2016-11-01

The purpose of this review is to explore low-cost options for simulation and training in neonatology. Numerous cost-effective options exist for simulation and training in neonatology. Lower cost options are available for teaching clinical skills and procedural training in neonatal intubation, chest tube insertion, and pericardiocentesis, among others. Cost-effective, low-cost options for simulation-based education can be developed and shared in order to optimize the neonatal simulation training experience. Copyright © 2016 Elsevier Inc. All rights reserved.

State estimation and control for low-cost unmanned aerial vehicles

CERN Document Server

Hajiyev, Chingiz; Yenal Vural, Sıtkı

2015-01-01

This book discusses state estimation and control procedures for a low-cost unmanned aerial vehicle (UAV). The authors consider the use of robust adaptive Kalman filter algorithms and demonstrate their advantages over the optimal Kalman filter in the context of the difficult and varied environments in which UAVs may be employed. Fault detection and isolation (FDI) and data fusion for UAV air-data systems are also investigated, and control algorithms, including the classical, optimal, and fuzzy controllers, are given for the UAV. The performance of different control methods is investigated and the results compared. State Estimation and Control of Low-Cost Unmanned Aerial Vehicles covers all the important issues for designing a guidance, navigation and control (GNC) system of a low-cost UAV. It proposes significant new approaches that can be exploited by GNC system designers in the future and also reviews the current literature. The state estimation, control and FDI methods are illustrated by examples and MATLAB...

A novel low-cost approach for navigated transcranial magnetic stimulation.

Science.gov (United States)

Rodseth, Jakob; Washabaugh, Edward P; Krishnan, Chandramouli

2017-01-01

Transcranial magnetic stimulation (TMS) is commonly used for assessing or modulating brain excitability. However, the credibility of TMS outcomes depends on accurate and reliable coil placement during stimulation. Navigated TMS systems can address this issue, but these systems are expensive for routine use in clinical and research environments. The purpose of this study was to provide a high-quality open source framework for navigated TMS and test its reliability and accuracy using standard TMS procedures. A navigated TMS system was created using a low-cost 3D camera system (OptiTrack Trio), which communicates with our free and open source software environment programmed using the Unity 3D gaming engine. The environment is user friendly and has functions to allow for a variety of stimulation procedures (e.g., head and coil co-registration, multiple hotspot/grid tracking, intuitive matching, and data logging). The system was then validated using a static mockup of a TMS session. The clinical utility was also evaluated by assessing the repeatability and operator accuracy when collecting motor evoked potential (MEP) data from human subjects. The system was highly reliable and improved coil placement accuracy (position error = 1.2 mm and orientation error = 0.3°) as well as the quality and consistency (ICC >0.95) of MEPs recorded during TMS. These results indicate that the proposed system is a viable tool for reliable coil placement during TMS procedures, and can improve accuracy in locating the coil over a desired hotspot both within and between sessions.

Prediction of low birth weight from other anthropometric parameters ...

African Journals Online (AJOL)

Background: Low birth weight is a global problem but presents a major burden on the neonatal services in developing countries such as Nigeria, and brings to bear a greater strain on the meagre resources available for health care delivery and family financing. In a resourceconstrained setting as ours, proper weighing of all ...

Low-Cost GRIN-Lens-Based Nephelometric Turbidity Sensing in the Range of 0.1-1000 NTU.

Science.gov (United States)

Metzger, Michael; Konrad, Alexander; Blendinger, Felix; Modler, Andreas; Meixner, Alfred J; Bucher, Volker; Brecht, Marc

2018-04-06

Turbidity sensing is very common in the control of drinking water. Furthermore, turbidity measurements are applied in the chemical (e.g., process monitoring), pharmaceutical (e.g., drug discovery), and food industries (e.g., the filtration of wine and beer). The most common measurement technique is nephelometric turbidimetry. A nephelometer is a device for measuring the amount of scattered light of suspended particles in a liquid by using a light source and a light detector orientated in 90° to each other. Commercially available nephelometers cost usually-depending on the measurable range, reliability, and precision-thousands of euros. In contrast, our new developed GRIN-lens-based nephelometer, called GRINephy, combines low costs with excellent reproducibility and precision, even at very low turbidity levels, which is achieved by its ability to rotate the sample. Thereby, many cuvette positions can be measured, which results in a more precise average value for the turbidity calculated by an algorithm, which also eliminates errors caused by scratches and contaminations on the cuvettes. With our compact and cheap Arduino-based sensor, we are able to measure in the range of 0.1-1000 NTU and confirm the ISO 7027-1:2016 for low turbidity values.

Low-maintenance energy requirements of obese dogs after weight loss.

Science.gov (United States)

German, Alexander J; Holden, Shelley L; Mather, Nicola J; Morris, Penelope J; Biourge, Vincent

2011-10-01

Weight rebound after successful weight loss is a well-known phenomenon in humans and dogs, possibly due to the fact that energy restriction improves metabolic efficiency, reducing post-weight-loss maintenance energy requirements (MER). The aim of the present study was to estimate post-weight-loss MER in obese pet dogs that had successfully lost weight and did not subsequently rebound. A total of twenty-four obese dogs, successfully completing a weight management programme at the Royal Canin Weight Management Clinic, University of Liverpool (Wirral, UK), were included. In all dogs, a period of >14 d of stable weight ( lean tissue lost was negatively associated with post-weight-loss MER. MER are low after weight loss in obese pet dogs (typically only 10 % more than required during weight-loss MER), which has implications for what should constitute the optimal diet during this period. Preserving lean tissue during weight loss may maximise post-weight-loss MER and help prevent rebound.

Low-cost universal stereoscopic virtual reality interfaces

Science.gov (United States)

Starks, Michael R.

1993-09-01

Low cost stereoscopic virtual reality hardware interfacing with nearly any computer and stereoscopic software running on any PC is described. Both are user configurable for serial or parallel ports. Stereo modeling, rendering, and interaction via gloves or 6D mice are provided. Low cost LCD Visors and external interfaces represent a breakthrough in convenience and price/performance. A complete system with software, Visor, interface and Power Glove is under $DOL500. StereoDrivers will interface with any system giving video sync (e.g., G of RGB). PC3D will access any standard serial port, while PCVR works with serial or parallel ports and glove devices. Model RF Visors detect magnetic fields and require no connection to the system. PGSI is a microprocessor control for the Power Glove and Visors. All interfaces will operate to 120 Hz with Model G Visors. The SpaceStations are demultiplexing, field doubling devices which convert field sequential video or graphics for stereo display with dual video projection or dual LCD SpaceHelmets.

Low-cost metamaterial-on-paper chemical sensor.

Science.gov (United States)

Sadeqi, Aydin; Nejad, Hojatollah Rezaei; Sonkusale, Sameer

2017-07-10

We present a disposable low cost paper-based metamaterial for sensing liquids based on their dielectric properties. The sensor is based on resonance shift due to the change in the effective capacitance of each resonator in the metamaterial array. Key novelty in the design is the implementation of metamaterial on low cost and ubiquitous paper substrate. This metamaterial-on-paper sensor is fabricated in a totally cleanroom-free process using wax printing and screen printing. Wax patterning of paper enables creation of microfluidic channels such that liquid analytes can be delivered to each metamaterial unit cell for sensing. Screen printing is used to implement disc shaped resonator unit cells. We demonstrate sensing of liquids: Oil, methanol, glycerol and water each showing an average resonance frequency shift of 1.12 (9.6%), 4.12 (35.4%), 8.76 (75.3%) and 11.63 GHz (100%) around the center frequency of around 94 GHz respectively. Being label-free, this approach can be expanded to sense other liquids based on their dielectric constants.

Large area, low cost space solar cells with optional wraparound contacts

Science.gov (United States)

Michaels, D.; Mendoza, N.; Williams, R.

1981-01-01

Design parameters for two large area, low cost solar cells are presented, and electron irradiation testing, thermal alpha testing, and cell processing are discussed. The devices are a 2 ohm-cm base resistivity silicon cell with an evaporated aluminum reflector produced in a dielectric wraparound cell, and a 10 ohm-cm silicon cell with the BSF/BSR combination and a conventional contact system. Both cells are 5.9 x 5.9 cm and require 200 micron thick silicon material due to mission weight constraints. Normalized values for open circuit voltage, short circuit current, and maximum power calculations derived from electron radiation testing are given. In addition, thermal alpha testing values of absorptivity and emittance are included. A pilot cell processing run produced cells averaging 14.4% efficiencies at AMO 28 C. Manufacturing for such cells will be on a mechanized process line, and the area of coverslide application technology must be considered in order to achieve cost effective production.

Prosthetic design directives: Low-cost hands within reach.

Science.gov (United States)

Jones, G K; Rosendo, A; Stopforth, R

2017-07-01

Although three million people around the world suffer from the lack of one or both upper limbs 80% of this number is located within developing countries. While prosthetic prices soar with technology 3D printing and low cost electronics present a sensible solution for those that cannot afford expensive prosthetics. The electronic and control design of a low-cost prosthetic hand, the Touch Hand II, is discussed. This paper shows that sensorless techniques can be used to reduce design complexities, costs, and provide easier access to the electronics. A closing and opening finite state machine (COFSM) was developed to handle the actuated digit joint control state and a supervisory switching control scheme, used for speed and grip strength control. Three torque and speed settings were created to be preset for specific grasps. The hand was able to replicate ten frequently used grasps and grip some common objects. Future work is necessary to enable a user to control it with myoelectric signals (MESs) and to solve operational problems related to electromagnetic interference (EMI).

Low-Cost Phase Change Material for Building Envelopes

Energy Technology Data Exchange (ETDEWEB)

Abhari, Ramin [Renewable Energy Group

2015-08-06

A low-cost PCM process consisting of conversion of fats and oils to PCM-range paraffins, and subsequent “encapsulation” of the paraffin using conventional plastic compounding/pelletizing equipment was demonstrated. The PCM pellets produced were field-tested in a building envelope application. This involved combining the PCM pellets with cellulose insulation, whereby 33% reduction in peak heat flux and 12% reduction in heat gain was observed (average summertime performance). The selling price of the PCM pellets produced according to this low-cost process is expected to be in the $1.50-$3.00/lb range, compared to current encapsulated PCM price of about $7.00/lb. Whole-building simulations using corresponding PCM thermal analysis data suggest a payback time of 8 to 16 years (at current energy prices) for an attic insulation retrofit project in the Phoenix climate area.

Waste Management Facilities cost information for low-level waste

Energy Technology Data Exchange (ETDEWEB)

Shropshire, D.; Sherick, M.; Biadgi, C.

1995-06-01

This report contains preconceptual designs and planning level life-cycle cost estimates for managing low-level waste. The report`s information on treatment, storage, and disposal modules can be integrated to develop total life-cycle costs for various waste management options. A procedure to guide the US Department of Energy and its contractor personnel in the use of cost estimation data is also summarized in this report.

COMPARISON BETWEEN RGB AND RGB-D CAMERAS FOR SUPPORTING LOW-COST GNSS URBAN NAVIGATION

Directory of Open Access Journals (Sweden)

L. Rossi

2018-05-01

Full Text Available A pure GNSS navigation is often unreliable in urban areas because of the presence of obstructions, thus preventing a correct reception of the satellite signal. The bridging between GNSS outages, as well as the vehicle attitude reconstruction, can be recovered by using complementary information, such as visual data acquired by RGB-D or RGB cameras. In this work, the possibility of integrating low-cost GNSS and visual data by means of an extended Kalman filter has been investigated. The focus is on the comparison between the use of RGB-D or RGB cameras. In particular, a Microsoft Kinect device (second generation and a mirrorless Canon EOS M RGB camera have been compared. The former is an interesting RGB-D camera because of its low-cost, easiness of use and raw data accessibility. The latter has been selected for the high-quality of the acquired images and for the possibility of mounting fixed focal length lenses with a lower weight and cost with respect to a reflex camera. The designed extended Kalman filter takes as input the GNSS-only trajectory and the relative orientation between subsequent pairs of images. Depending on the visual data acquisition system, the filter is different because RGB-D cameras acquire both RGB and depth data, allowing to solve the scale problem, which is instead typical of image-only solutions. The two systems and filtering approaches were assessed by ad-hoc experimental tests, showing that the use of a Kinect device for supporting a u-blox low-cost receiver led to a trajectory with a decimeter accuracy, that is 15 % better than the one obtained when using the Canon EOS M camera.

Acoustic Monitor for Liquid-Solid Slurries Measurements at Low Weight Fractions

International Nuclear Information System (INIS)

Tavlarides, L. L.; Sangani, A.; Shcherbakov, A.; Lee, J. S.; Dievendorf, E.

2003-01-01

The principal objective of the project is to develop an acoustic probe for determining the weight fraction of particles in a flowing suspension. The suspension can be solid-liquid (S-L) or solid-gas-liquid (S-G-L). The work will include testing the theory of acoustic wave propagation in suspensions and demonstrating the application of the probe by installing it on a flow loop through which a suspension is flowing and determining the particle weight fraction. The signal from the probe must be processed such that the noise arising from the presence of gas bubbles is removed to yield an accurate estimate of the particle weight fraction. Particular attention will be given to testing suspensions with low particle weight fractions since slurries to be transported in nuclear waste processing will have low particle weight fractions. Originally, the probe was to be developed and tested at Syracuse University (SU) then installed and tested at Oak Ridge National Laboratories (ORNL) for surrogate slurries from the Hanford Nuclear site. However, after discussions between SU and ORNL in June 2002 it was agreed that all tests would be conducted at SU

Acoustic Monitor for Liquid-Solid Slurries Measurements at Low Weight Fractions

International Nuclear Information System (INIS)

Tavlarides, L. L.; Sangani, A.; Shcherbakov, A.; Lee, J. S.; Dievendorf, E.

2002-01-01

The principal objective of the project is to develop an acoustic probe for determining the weight fraction of particles in a flowing suspension. The suspension can be solid-liquid (S-L) or solid-gas-liquid (S-G-L). The work will include testing the theory of acoustic wave propagation in suspensions and demonstrating the application of the probe by installing it on a flow loop through which a suspension is flowing and determining the particle weight fraction. The signal from the probe must be processed such that the noise arising from the presence of gas bubbles is removed to yield an accurate estimate of the particle weight fraction. Particular attention will be given to testing suspensions with low particle weight fractions since slurries to be transported in nuclear waste processing will have low particle weight fractions. Originally, the probe was to be developed and tested at Syracuse University (SU) then installed and tested at Oak Ridge National Laboratories (ORNL) for surrogate slurries from the Hanford Nuclear site. However, after discussions between SU and ORNL in June 2002 it was agreed that all tests would be conducted at SU

A low cost support post for SSC quadrupole magnets and other cryogenic applications

International Nuclear Information System (INIS)

Hiller, M.W.; Kunz, R.J.; Lehmann, G.A.; Nilles, M.J.

1994-01-01

An injection molded support post has been designed and tested for use in the cryostat of the 5.4 meter long SSC Collider Quadrupole Magnet (CQM). This glass reinforced thermoplastic support is less costly than the complex alternative post designs that consist of filament wound tubes with thermal shrink fit metallic end pieces. The near net shape injection molding process delivers customized components at production rates suitable for present and proposed large scale cryogenic projects such as large accelerators, SMES, and Maglev. In addition, standard shapes (plates, tubes, threaded rods, and fasteners) comprised of this composite are available as catalog items. This paper presents the design considerations, material testing, and validation of predicted structural performance through component testing. Test results reported herein include compressive strength validations as well as previously unreported creep, thermal conductivity, and thermal contraction data. A delineated reliability method is discussed for verifying compliance with apportioned reliability targets using a synthesis of the FEA and test data. Also the design approach and data presented here can be extended toward the design of low cost mass produced supports for other cryogenic applications

Race, ethnicity, concentrated poverty, and low birth weight disparities.

Science.gov (United States)

Sims, Mario; Sims, Tammy L; Bruce, Marino A

2008-07-01

This study examines the extent to which the relationship between area socioeconomic position (SEP) and low birth weight (LBW) varies by race and ethnicity. A cross-sectional, secondary data analysis was performed with 1992-1994 Vital Statistics and 1990 U.S. Census data for selected metropolitan areas. Low birth weight (rates were calculated for non-Hispanic Black, Latino, and non-Hispanic White live singleton births. Concentrated poverty was defined as poor persons living in neighborhoods with 40% or more poverty in metropolitan areas. The results showed that the relationship between concentrated poverty and LBW varied by race and ethnicity. Concentrated poverty was significant for Latinos, even when controlling for maternal health and MSA-level factors. By contrast, maternal health characteristics, such as pre-term birth, teen birth and tobacco use, explained much of the variance in African-American and White LBW These findings extend the discussion about race, class, and health disparities to include Latinos and shows how the relationship between SEP and LBW can vary within an ethnic group.

Meta-regression analysis to evaluate relationships between maternal blood levels of placentation biomarkers and low delivery weight.

Science.gov (United States)

Goto, Eita

2018-05-03

Caution is required for women at increased risk of low neonatal delivery weight. To evaluate relationships between maternal placentation biomarkers and the odds of low delivery weight. Databases including PubMed/MEDLINE were searched up to May 2017 using keywords involving biomarker names and "low birthweight." English language studies providing true- and false-positive, and true- and false-negative results of low delivery weight classified by maternal blood levels of placentation biomarkers (in units of multiple of the mean [MoM]) were included. Coefficients representing changes in log odds ratio for low delivery weight per 1 MoM increase in maternal blood placentation biomarkers, and those adjusted for race, sampling period, and/or study quality were calculated. Adjusted coefficients representing changes in log odds ratio for low delivery weight per 1 MoM increase in maternal blood levels of α-fetoprotein (AFP) and β-human chorionic gonadotropin (β-hCG) were significantly greater than 0 (both Plow delivery weight. This article is protected by copyright. All rights reserved. This article is protected by copyright. All rights reserved.

Physical Properties of Low-Molecular Weight Polydimethylsiloxane Fluids

Energy Technology Data Exchange (ETDEWEB)

Roberts, Christine Cardinal [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Graham, Alan [Univ. of Colorado, Denver, CO (United States); Nemer, Martin [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Phinney, Leslie M. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Garcia, Robert M. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Soehnel, Melissa Marie [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Stirrup, Emily Kate [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2017-02-01

Physical property measurements including viscosity, density, thermal conductivity, and heat capacity of low-molecular weight polydimethylsiloxane (PDMS) fluids were measured over a wide temperature range (-50°C to 150°C when possible). Properties of blends of 1 cSt and 20 cSt PDMS fluids were also investigated. Uncertainties in the measurements are cited. These measurements will provide greater fidelity predictions of environmental sensing device behavior in hot and cold environments.

Smartfactory, a modular, low cost productivity monitoring system

CSIR Research Space (South Africa)

Bosscha, PA

2010-07-01

Full Text Available lack of objectivity and plain incorrect data entries. In aid of the SMMEs the Smartfactory system offers a low-cost modular monitoring solution capable of implementation in a step by step fashion with little training required in installation...

Low-Cost Resonant Cavity Raman Gas Probe for Multi-Gas Detection

Science.gov (United States)

Thorstensen, J.; Haugholt, K. H.; Ferber, A.; Bakke, K. A. H.; Tschudi, J.

2014-12-01

Raman based gas sensing can be attractive in several industrial applications, due to its multi-gas sensing capabilities and its ability to detect O_2 and N_2. In this article, we have built a Raman gas probe, based on low-cost components, which has shown an estimated detection limit of 0.5 % for 30 second measurements of N_2 and O_2. While this detection limit is higher than that of commercially available equipment, our estimated component cost is approximately one tenth of the price of commercially available equipment. The use of a resonant Fabry-Pérot cavity increases the scattered signal, and hence the sensitivity, by a factor of 50. The cavity is kept in resonance using a piezo-actuated mirror and a photodiode in a feedback loop. The system described in this article was made with minimum-cost components to demonstrate the low-cost principle. However, it is possible to decrease the detection limit using a higher-powered (but still low-cost) laser and improving the collection optics. By applying these improvements, the detection limit and estimated measurement precision will be sufficient for e.g. the monitoring of input gases in combustion processes, such as e.g. (bio-)gas power plants. In these processes, knowledge about gas compositions with 0.1 % (absolute) precision can help regulate and optimize process conditions. The system has the potential to provide a low-cost, industrial Raman sensor that is optimized for specific gas-detection applications.

Application of low-cost methodologies for mobile phone app development.

Science.gov (United States)

Zhang, Melvyn; Cheow, Enquan; Ho, Cyrus Sh; Ng, Beng Yeong; Ho, Roger; Cheok, Christopher Cheng Soon

2014-12-09

The usage of mobile phones and mobile phone apps in the recent decade has indeed become more prevalent. Previous research has highlighted a method of using just the Internet browser and a text editor to create an app, but this does not eliminate the challenges faced by clinicians. More recently, two methodologies of app development have been shared, but there has not been any disclosures pertaining to the costs involved. In addition, limitations such as the distribution and dissemination of the apps have not been addressed. The aims of this research article are to: (1) highlight a low-cost methodology that clinicians without technical knowledge could use to develop educational apps; (2) clarify the respective costs involved in the process of development; (3) illustrate how limitations pertaining to dissemination could be addressed; and (4) to report initial utilization data of the apps and to share initial users' self-rated perception of the apps. In this study, we will present two techniques of how to create a mobile app using two of the well-established online mobile app building websites. The costs of development are specified and the methodology of dissemination of the apps will be shared. The application of the low-cost methodologies in the creation of the "Mastering Psychiatry" app for undergraduates and "Déjà vu" app for postgraduates will be discussed. A questionnaire survey has been administered to undergraduate students collating their perceptions towards the app. For the Mastering Psychiatry app, a cumulative total of 722 users have used the mobile app since inception, based on our analytics. For the Déjà vu app, there has been a cumulative total of 154 downloads since inception. The utilization data demonstrated the receptiveness towards these apps, and this is reinforced by the positive perceptions undergraduate students (n=185) had towards the low-cost self-developed apps. This is one of the few studies that have demonstrated the low-cost

OCT despeckling via weighted nuclear norm constrained non-local low-rank representation

Science.gov (United States)

Tang, Chang; Zheng, Xiao; Cao, Lijuan

2017-10-01

As a non-invasive imaging modality, optical coherence tomography (OCT) plays an important role in medical sciences. However, OCT images are always corrupted by speckle noise, which can mask image features and pose significant challenges for medical analysis. In this work, we propose an OCT despeckling method by using non-local, low-rank representation with weighted nuclear norm constraint. Unlike previous non-local low-rank representation based OCT despeckling methods, we first generate a guidance image to improve the non-local group patches selection quality, then a low-rank optimization model with a weighted nuclear norm constraint is formulated to process the selected group patches. The corrupted probability of each pixel is also integrated into the model as a weight to regularize the representation error term. Note that each single patch might belong to several groups, hence different estimates of each patch are aggregated to obtain its final despeckled result. Both qualitative and quantitative experimental results on real OCT images show the superior performance of the proposed method compared with other state-of-the-art speckle removal techniques.

Low-molecular-weight poly-carboxylate as crystal growth modifier in ...

Indian Academy of Sciences (India)

Biomineralization; growth modifier; amino acid; low-molecular-weight chiral poly- carboxylate; calcium ... They are also used as gravity sensors, for metal storage and .... The pH of the solutions was maintained at ~10⋅0 for different periods of ...

Risk assessment and reliability for low level radioactive waste disposal

International Nuclear Information System (INIS)

Gregory, P.O.; Jones, G.A.

1986-01-01

The reliability of critical design features at low-level radioactive waste disposal facilities is a major concern in the licensing of these structures. To date, no systematic methodology has been adopted to evaluate the geotechnical reliability of Uranium Mill Tailings Remedial Action (UMTRA) disposal facilities currently being designed and/or constructed. This paper discusses and critiques the deterministic methods currently used to evaluate UMTRA reliability. Because deterministic methods may not be applicable in some cases because of the unusually long design life of UMTRA facilities, it is proposed that a probabilistic risk assessment-based methodology be used as a secondary method to aid in the evaluating of geotechnical reliability of critical items. Similar methodologies have proven successful in evaluating the reliability of a variety of conventional earth structures. In this paper, an ''acceptable'' level of risk for UMTRA facilities is developed, an evaluation method is presented, and two example applications of the proposed methodology are provided for a generic UMTRA disposal facility. The proposed technique is shown to be a simple method which might be used to aid in reliability evaluations on a selective basis. Finally, other possible applications and the limitations of the proposed methodology are discussed

Cultural Heritage Recording Utilising Low-Cost Closerange Photogrammetry

Directory of Open Access Journals (Sweden)

Melanie Kirchhöfer

2011-12-01

Full Text Available Cultural heritage is under a constant threat of damage or even destruction and comprehensive and accurate recording is necessary to attenuate the risk of losing heritage or serve as basis for reconstruction. Cost effective and easy to use methods are required to record cultural heritage, particularly during a world recession, and close-range photogrammetry has proven potential in this area. Off-the-shelf digital cameras can be used to rapidly acquire data at low cost, allowing non-experts to become involved. Exterior orientation of the camera during exposure ideally needs to be established for every image, traditionally requiring known coordinated target points. Establishing these points is time consuming and costly and using targets can be often undesirable on sensitive sites. MEMS-based sensors can assist in overcoming this problem by providing small-size and low-cost means to directly determine exterior orientation for close-range photogrammetry. This paper describes development of an image-based recording system, comprising an off-the-shelf digital SLR camera, a MEMS-based 3D orientation sensor and a GPS antenna. All system components were assembled in a compact and rigid frame that allows calibration of rotational and positional offsets between the components. The project involves collaboration between English Heritage and Loughborough University and the intention is to assess the system’s achievable accuracy and practicability in a heritage recording environment. Tests were conducted at Loughborough University and a case study at St. Catherine’s Oratory on the Isle of Wight, UK. These demonstrate that the data recorded by the system can indeed meet the accuracy requirements for heritage recording at medium accuracy (1-4cm, with either a single or even no control points. As the recording system has been configured with a focus on low-cost and easy-to-use components, it is believed to be suitable for heritage recording by non

End-user perspective of low-cost sensors for outdoor air pollution monitoring.

Science.gov (United States)

Rai, Aakash C; Kumar, Prashant; Pilla, Francesco; Skouloudis, Andreas N; Di Sabatino, Silvana; Ratti, Carlo; Yasar, Ansar; Rickerby, David

2017-12-31

Low-cost sensor technology can potentially revolutionise the area of air pollution monitoring by providing high-density spatiotemporal pollution data. Such data can be utilised for supplementing traditional pollution monitoring, improving exposure estimates, and raising community awareness about air pollution. However, data quality remains a major concern that hinders the widespread adoption of low-cost sensor technology. Unreliable data may mislead unsuspecting users and potentially lead to alarming consequences such as reporting acceptable air pollutant levels when they are above the limits deemed safe for human health. This article provides scientific guidance to the end-users for effectively deploying low-cost sensors for monitoring air pollution and people's exposure, while ensuring reasonable data quality. We review the performance characteristics of several low-cost particle and gas monitoring sensors and provide recommendations to end-users for making proper sensor selection by summarizing the capabilities and limitations of such sensors. The challenges, best practices, and future outlook for effectively deploying low-cost sensors, and maintaining data quality are also discussed. For data quality assurance, a two-stage sensor calibration process is recommended, which includes laboratory calibration under controlled conditions by the manufacturer supplemented with routine calibration checks performed by the end-user under final deployment conditions. For large sensor networks where routine calibration checks are impractical, statistical techniques for data quality assurance should be utilised. Further advancements and adoption of sophisticated mathematical and statistical techniques for sensor calibration, fault detection, and data quality assurance can indeed help to realise the promised benefits of a low-cost air pollution sensor network. Copyright © 2017 Elsevier B.V. All rights reserved.

Low-cost computer mouse for the elderly or disabled in Taiwan.

Science.gov (United States)

Chen, C-C; Chen, W-L; Chen, B-N; Shih, Y-Y; Lai, J-S; Chen, Y-L

2014-01-01

A mouse is an important communication interface between a human and a computer, but it is still difficult to use for the elderly or disabled. To develop a low-cost computer mouse auxiliary tool. The principal structure of the low-cost mouse auxiliary tool is the IR (infrared ray) array module and the Wii icon sensor module, which combine with reflective tape and the SQL Server database. This has several benefits including cheap hardware cost, fluent control, prompt response, adaptive adjustment and portability. Also, it carries the game module with the function of training and evaluation; to the trainee, it is really helpful to upgrade the sensitivity of consciousness/sense and the centralization of attention. The intervention phase/maintenance phase, with regard to clicking accuracy and use of time, p value (p< 0.05) reach the level of significance. The development of the low cost adaptive computer mouse auxiliary tool was completed during the study and was also verified as having the characteristics of low cost, easy operation and the adaptability. To patients with physical disabilities, if they have independent control action parts of their limbs, the mouse auxiliary tool is suitable for them to use, i.e. the user only needs to paste the reflective tape by the independent control action parts of the body to operate the mouse auxiliary tool.

Design for High Performance, Low Power, and Reliable 3D Integrated Circuits

CERN Document Server

Lim, Sung Kyu

2013-01-01

This book describes the design of through-silicon-via (TSV) based three-dimensional integrated circuits.  It includes details of numerous “manufacturing-ready” GDSII-level layouts of TSV-based 3D ICs, developed with tools covered in the book. Readers will benefit from the sign-off level analysis of timing, power, signal integrity, and thermo-mechanical reliability for 3D IC designs.  Coverage also includes various design-for-manufacturability (DFM), design-for-reliability (DFR), and design-for-testability (DFT) techniques that are considered critical to the 3D IC design process. Describes design issues and solutions for high performance and low power 3D ICs, such as the pros/cons of regular and irregular placement of TSVs, Steiner routing, buffer insertion, low power 3D clock routing, power delivery network design and clock design for pre-bond testability. Discusses topics in design-for-electrical-reliability for 3D ICs, such as TSV-to-TSV coupling, current crowding at the wire-to-TSV junction and the e...

Trunk Muscle Size and Composition Assessment in Older Adults with Chronic Low Back Pain: An Intra-Examiner and Inter-Examiner Reliability Study.

Science.gov (United States)

Sions, Jaclyn Megan; Smith, Andrew Craig; Hicks, Gregory Evan; Elliott, James Matthew

2016-08-01

 To evaluate intra- and inter-examiner reliability for the assessment of relative cross-sectional area, muscle-to-fat infiltration indices, and relative muscle cross-sectional area, i.e., total cross-sectional area minus intramuscular fat, from T1-weighted magnetic resonance images obtained in older adults with chronic low back pain.  Reliability study.  n = 13 (69.3 ± 8.2 years old)  After lumbar magnetic resonance imaging, two examiners produced relative cross-sectional area measurements of multifidi, erector spinae, psoas, and quadratus lumborum by tracing regions of interest just inside fascial borders. Pixel-intensity summaries were used to determine muscle-to-fat infiltration indices; relative muscle cross-sectional area was calculated. Intraclass correlation coefficients were used to estimate intra- and inter-examiner reliability; standard error of measurement was calculated.  Intra-examiner intraclass correlation coefficient point estimates for relative cross-sectional area, muscle-to-fat infiltration indices, and relative muscle cross-sectional area were excellent for multifidi and erector spinae across levels L2-L5 (ICC = 0.77-0.99). At L3, intra-examiner reliability was excellent for relative cross-sectional area, muscle-to-fat infiltration indices, and relative muscle cross-sectional area for both psoas and quadratus lumborum (ICC = 0.81-0.99). Inter-examiner intraclass correlation coefficients ranged from poor to excellent for relative cross-sectional area, muscle-to-fat infiltration indices, and relative muscle cross-sectional area.  Assessment of relative cross-sectional area, muscle-to-fat infiltration indices, and relative muscle cross-sectional area in older adults with chronic low back pain can be reliably determined by one examiner from T1-weighted images. Such assessments provide valuable information, as muscle-to-fat infiltration indices and relative muscle cross-sectional area indicate that a substantial amount of

Algolcam: Low Cost Sky Scanning with Modern Technology

Science.gov (United States)

Connors, Martin; Bolton, Dempsey; Doktor, Ian

2016-01-01

Low cost DSLR cameras running under computer control offer good sensitivity, high resolution, small size, and the convenience of digital image handling. Recent developments in small single board computers have pushed the performance to cost and size ratio to unprecedented values, with the further advantage of very low power consumption. Yet a third technological development is motor control electronics which is easily integrated with the computer to make an automated mount, which in our case is custom built, but with similar mounts available commercially. Testing of such a system under a clear plastic dome at our auroral observatory was so successful that we have developed a weatherproof housing allowing use during the long, cold, and clear winter nights at northerly latitudes in Canada. The main advantage of this housing should be improved image quality as compared to operation through clear plastic. We have improved the driving software to include the ability to self-calibrate pointing through the web API of astrometry.net, and data can be reduced automatically through command line use of the Muniwin program. The mount offers slew in declination and RA, and tracking at sidereal or other rates in RA. Our previous tests with a Nikon D5100 with standard lenses in the focal length range 50-200 mm, operating at f/4 to f/5, allowed detection of 12th magnitude stars with 30 second exposure under very dark skies. At 85 mm focal length, a field of 15° by 10° is imaged with 4928 by 3264 color pixels, and we have adopted an 85 mm fixed focal length f/1.4 lens (as used by Project Panoptes), which we expect will give a limited magnitude approaching 15. With a large field of view, deep limiting magnitude, low cost, and ease of construction and use, we feel that the Algolcam offers great possibilities in monitoring and finding changes in the sky. We have already applied it to variable star light curves, and with a suitable pipeline for detection of moving or varying objects

a Low-Cost Panoramic Camera for the 3d Documentation of Contaminated Crime Scenes

Science.gov (United States)

Abate, D.; Toschi, I.; Sturdy-Colls, C.; Remondino, F.

2017-11-01

Crime scene documentation is a fundamental task which has to be undertaken in a fast, accurate and reliable way, highlighting evidence which can be further used for ensuring justice for victims and for guaranteeing the successful prosecution of perpetrators. The main focus of this paper is on the documentation of a typical crime scene and on the rapid recording of any possible contamination that could have influenced its original appearance. A 3D reconstruction of the environment is first generated by processing panoramas acquired with the low-cost Ricoh Theta 360 camera, and further analysed to highlight potentials and limits of this emerging and consumer-grade technology. Then, a methodology is proposed for the rapid recording of changes occurring between the original and the contaminated crime scene. The approach is based on an automatic 3D feature-based data registration, followed by a cloud-to-cloud distance computation, given as input the 3D point clouds generated before and after e.g. the misplacement of evidence. All the algorithms adopted for panoramas pre-processing, photogrammetric 3D reconstruction, 3D geometry registration and analysis, are presented and currently available in open-source or low-cost software solutions.

Trends in incidence of low birth weight deliveries in a tertiary hospital, in Northern Nigeria

Directory of Open Access Journals (Sweden)

O Hassan

2011-01-01

Conclusion: There is a steady decline in the incidence of low birth weight deliveries over the period of study. Most of the babies born with low birth weight were delivered before 37 completed weeks of gestation and preterm labour was the most dorminant risk factor.

Low cost drip irrigation in Burkina Faso : unravelling actors, networks and practices

NARCIS (Netherlands)

Wanvoeke, M.J.V.

2015-01-01

Title: Low cost drip irrigation in Burkina Faso: Unravelling Actors, Networks and Practices

In Burkina Faso, there is a lot of enthusiasm about Low Cost Drip Irrigation (LCDI) as a tool to irrigate vegetables, and thus improve food security,

Multi-robot system using low-cost infrared sensors

Directory of Open Access Journals (Sweden)

Anubhav Kakkar

2013-03-01

Full Text Available This paper presents a proposed set of the novel technique, methods, and algorithm for simultaneous path planning, area exploration, area retrieval, obstacle avoidance, object detection, and object retrieval   autonomously by a multi-robot system. The proposed methods and algorithms are built considering the use of low cost infrared sensors with the ultimate function of efficiently exploring the given unknown area and simultaneously identifying desired objects by analyzing the physical characteristics of several of the objects that come across during exploration. In this paper, we have explained the scenario by building a coordinative multi-robot system consisting of two autonomously operated robots equipped with low-cost and low-range infrared sensors to perform the assigned task by analyzing some of the sudden changes in their environment. Along with identifying and retrieving the desired object, the proposed methodology also provide an inclusive analysis of the area being explored. The novelties presented in the paper may significantly provide a cost-effective solution to the problem of area exploration and finding a known object in an unknown environment by demonstrating an innovative approach of using the infrared sensors instead of high cost long range sensors and cameras. Additionally, the methodology provides a speedy and uncomplicated method of traversing a complicated arena while performing all the necessary and inter-related tasks of avoiding the obstacles, analyzing the area as well as objects, and reconstructing the area using all these information collected and interpreted for an unknown environment. The methods and algorithms proposed are simulated over a complex arena to depict the operations and manually tested over a physical environment which provided 78% correct results with respect to various complex parameters set randomly.

Museum genomics: low-cost and high-accuracy genetic data from historical specimens.

Science.gov (United States)

Rowe, Kevin C; Singhal, Sonal; Macmanes, Matthew D; Ayroles, Julien F; Morelli, Toni Lyn; Rubidge, Emily M; Bi, Ke; Moritz, Craig C

2011-11-01

Natural history collections are unparalleled repositories of geographical and temporal variation in faunal conditions. Molecular studies offer an opportunity to uncover much of this variation; however, genetic studies of historical museum specimens typically rely on extracting highly degraded and chemically modified DNA samples from skins, skulls or other dried samples. Despite this limitation, obtaining short fragments of DNA sequences using traditional PCR amplification of DNA has been the primary method for genetic study of historical specimens. Few laboratories have succeeded in obtaining genome-scale sequences from historical specimens and then only with considerable effort and cost. Here, we describe a low-cost approach using high-throughput next-generation sequencing to obtain reliable genome-scale sequence data from a traditionally preserved mammal skin and skull using a simple extraction protocol. We show that single-nucleotide polymorphisms (SNPs) from the genome sequences obtained independently from the skin and from the skull are highly repeatable compared to a reference genome. © 2011 Blackwell Publishing Ltd.

Artificial intelligent decision support for low-cost launch vehicle integrated mission operations

Science.gov (United States)

Szatkowski, Gerard P.; Schultz, Roger

1988-01-01

The feasibility, benefits, and risks associated with Artificial Intelligence (AI) Expert Systems applied to low cost space expendable launch vehicle systems are reviewed. This study is in support of the joint USAF/NASA effort to define the next generation of a heavy-lift Advanced Launch System (ALS) which will provide economical and routine access to space. The significant technical goals of the ALS program include: a 10 fold reduction in cost per pound to orbit, launch processing in under 3 weeks, and higher reliability and safety standards than current expendables. Knowledge-based system techniques are being explored for the purpose of automating decision support processes in onboard and ground systems for pre-launch checkout and in-flight operations. Issues such as: satisfying real-time requirements, providing safety validation, hardware and Data Base Management System (DBMS) interfacing, system synergistic effects, human interfaces, and ease of maintainability, have an effect on the viability of expert systems as a useful tool.

A low cost, high precision extreme/harsh cold environment, autonomous sensor data gathering and transmission platform.

Science.gov (United States)

Chetty, S.; Field, L. A.

2014-12-01

SWIMS III, is a low cost, autonomous sensor data gathering platform developed specifically for extreme/harsh cold environments. Arctic ocean's continuing decrease of summer-time ice is related to rapidly diminishing multi-year ice due to the effects of climate change. Ice911 Research aims to develop environmentally inert materials that when deployed will increase the albedo, enabling the formation and/preservation of multi-year ice. SWIMS III's sophisticated autonomous sensors are designed to measure the albedo, weather, water temperature and other environmental parameters. This platform uses low cost, high accuracy/precision sensors, extreme environment command and data handling computer system using satellite and terrestrial wireless solution. The system also incorporates tilt sensors and sonar based ice thickness sensors. The system is light weight and can be deployed by hand by a single person. This presentation covers the technical, and design challenges in developing and deploying these platforms.

Neurodevelopmental outcomes of triplets or higher-order extremely low birth weight infants.

Science.gov (United States)

Wadhawan, Rajan; Oh, William; Vohr, Betty R; Wrage, Lisa; Das, Abhik; Bell, Edward F; Laptook, Abbot R; Shankaran, Seetha; Stoll, Barbara J; Walsh, Michele C; Higgins, Rosemary D

2011-03-01

Extremely low birth weight twins have a higher rate of death or neurodevelopmental impairment than singletons. Higher-order extremely low birth weight multiple births may have an even higher rate of death or neurodevelopmental impairment. Extremely low birth weight (birth weight 401-1000 g) multiple births born in participating centers of the Neonatal Research Network between 1996 and 2005 were assessed for death or neurodevelopmental impairment at 18 to 22 months' corrected age. Neurodevelopmental impairment was defined by the presence of 1 or more of the following: moderate to severe cerebral palsy; mental developmental index score or psychomotor developmental index score less than 70; severe bilateral deafness; or blindness. Infants who died within 12 hours of birth were excluded. Maternal and infant demographic and clinical variables were compared among singleton, twin, and triplet or higher-order infants. Logistic regression analysis was performed to establish the association between singletons, twins, and triplet or higher-order multiples and death or neurodevelopmental impairment, controlling for confounding variables that may affect death or neurodevelopmental impairment. Our cohort consisted of 8296 singleton, 2164 twin, and 521 triplet or higher-order infants. The risk of death or neurodevelopmental impairment was increased in triplets or higher-order multiples when compared with singletons (adjusted odds ratio: 1.7 [95% confidence interval: 1.29-2.24]), and there was a trend toward an increased risk when compared with twins (adjusted odds ratio: 1.27 [95% confidence: 0.95-1.71]). Triplet or higher-order births are associated with an increased risk of death or neurodevelopmental impairment at 18 to 22 months' corrected age when compared with extremely low birth weight singleton infants, and there was a trend toward an increased risk when compared with twins.

Inattention and development of toddlers born in preterm and with low birth weight.

Science.gov (United States)

Huang, June-Hui; Huang, Huei-Lin; Chen, Hsiu-Lin; Lin, Lung-Chang; Tseng, Hsing-I; Kao, Tsung-Jen

2012-07-01

The objective of this study was to examine the impact of low birth weight and preterm birth on a toddler's inattention and development, including cognitive, language, motor, social-emotional and adaptive behaviors. A total of 105 toddlers enrolled for the study; they were divided into four groups: 40 full-term and normal birth weight (NBW, birth weight greater than 2500 g) toddlers, 24 moderate birth weight (MLBW, birth weight between 2499 and 1500 g) toddlers, 20 very to extremely low birth weight (V-ELBW, 12 between 1000 and 1499 g and 8 lower than 1000 g) toddlers, and 21 term toddlers who were recruited from a clinic of developmental delay as the developmental delay at risk (DDR) group. The Bayley Scales of Infant and Toddler Development-Third Edition (BSID-III) and Disruptive Behavior Rating Scale-Toddler were used. The findings were as follows: (1) DDR group performed worst in BSID-III; (2) although there were no statistical differences among the NBW, MLBW, and V-ELBW groups in BSID-III, the lower the birth weight, the lower the average performance, especially in language, adaptive social behavior, and adaptive practical behavior; and (3) comparing the inattention score, the DDR group was the poorest, normal and V-ELBW groups were the best, and MLBW group was in the middle. In conclusion, low birth weight and preterm delivery affected children's inattention and development of language, adaptive social behavior, and adaptive practical behavior. Copyright © 2012. Published by Elsevier B.V.

Inattention and development of toddlers born in preterm and with low birth weight

Directory of Open Access Journals (Sweden)

June-Hui Huang

2012-07-01

Full Text Available The objective of this study was to examine the impact of low birth weight and preterm birth on a toddler's inattention and development, including cognitive, language, motor, social–emotional and adaptive behaviors. A total of 105 toddlers enrolled for the study; they were divided into four groups: 40 full-term and normal birth weight (NBW, birth weight greater than 2500 g toddlers, 24 moderate birth weight (MLBW, birth weight between 2499 and 1500 g toddlers, 20 very to extremely low birth weight (V-ELBW, 12 between 1000 and 1499 g and 8 lower than 1000 g toddlers, and 21 term toddlers who were recruited from a clinic of developmental delay as the developmental delay at risk (DDR group. The Bayley Scales of Infant and Toddler Development—Third Edition (BSID-III and Disruptive Behavior Rating Scale—Toddler were used. The findings were as follows: (1 DDR group performed worst in BSID-III; (2 although there were no statistical differences among the NBW, MLBW, and V-ELBW groups in BSID-III, the lower the birth weight, the lower the average performance, especially in language, adaptive social behavior, and adaptive practical behavior; and (3 comparing the inattention score, the DDR group was the poorest, normal and V-ELBW groups were the best, and MLBW group was in the middle. In conclusion, low birth weight and preterm delivery affected children's inattention and development of language, adaptive social behavior, and adaptive practical behavior.

Gestational Weight Gain and Post-Partum Weight Loss Among Young, Low-Income, Ethnic Minority Women

Science.gov (United States)

ROTHBERG, Bonnie E. Gould; MAGRIPLES, Urania; KERSHAW, Trace S.; RISING, Sharon Schindler; ICKOVICS, Jeannette R.

2010-01-01

Objective Document weight change trajectories that lead to gestational weight gain or postpartum weight loss outside clinical recommendations established by Institute of Medicine (IOM). Methods Women aged 14-25 receiving prenatal care and delivering singleton infants at term (N=427). Medical record review and four structured interviews conducted: second and third trimester, 6- and 12-months postpartum. Longitudinal mixed modeling to evaluate weight change trajectories. Results Only 22% of participants gained gestational weight within IOM guidelines. 62% exceeded maximum recommendations -- more common among those overweight/obese (BMI≥25.0; phypertension; breastfeeding promoted postpartum weight loss (all p<.02). BMI by race interaction suggested healthier outcomes for Latinas (p=0.02). Conclusion Excessive pregnancy weight gain and inadequate postpartum weight loss are highly prevalent among young low-income ethnic minority women. Pregnancy and postpartum are critical junctures for weight management interventions. PMID:20974459

Delivery of the extremely low-birth- weight vertex-presenting baby ...

African Journals Online (AJOL)

2010-12-02

Dec 2, 2010 ... rise in the caesarean section rate.1 This rise has been disproportionate to ... a possible extremely low-birth-weight infant the risks of mortality and short- and .... the US Health Statistics data from 1999 to 2000 using multivariate ...

Glutamine-enriched enteral nutrition in very low-birth-weight infants

NARCIS (Netherlands)

van den Berg, Anemone; van Zwol, Annelies; Moll, Henriëtte A.; Fetter, Willem P. F.; van Elburg, Ruurd M.

2007-01-01

Objective: To determine the effect of glutamine-enriched enteral nutrition in very low- birth- weight infants on the incidence of allergic and infectious diseases during the first year of life. Design: Follow- up study. Setting: Tertiary care hospital. Participants: All surviving infants who

Development of ITM Oxygen Technology for Low-cost and Low-emission Gasification and Other Industrial Applications

Energy Technology Data Exchange (ETDEWEB)

Fogash, Kevin [Air Products and Chemicals, Inc., Allentown, PA (United States)

2015-12-15

Air Products carried out a scope of work under DOE Award No. DE-FE0012065 “Development of ITM Oxygen Technology for Low-cost and Low-emission Gasification and Other Industrial Applications” with subcontractors Ceramatec, Penn State, and WorleyParsons. The scope of work under this award was aimed at furthering the development of the Ion Transport Membrane (ITM) Oxygen production process toward a demonstration-scale facility known as the Oxygen Development Facility (ODF). Specific activities will help to enable design and construction of the ODF through advancement of a number of challenging technical elements that are required to manage risk in the initial deployment of ITM technology. Major objectives of the work included developing ITM Oxygen ceramic membrane materials with improved performance and reliability, optimizing ceramic module geometry and fabrication methods, testing module performance, trialing the improved fabrication process at commercial scale in the Ceramic Membrane Module Fabrication Facility (CerFab), and advancing engineering development of the ITM oxygen production process, including vessel design and contaminant control measures to prepare for deployment of the ODF. The comprehensive report that follows details the team’s work, which includes several notable accomplishments: 1) compressive creep, a likely limiter of ceramic module lifetime in service, was demonstrated to be retarded by an order of magnitude by changes in material formulation, module joining dimensions, and internal wafer geometry; 2) two promising new materials were shown to be superior to the incumbent ITM material in a key material parameter related to oxygen flux; 3) module degradation mechanisms were identified following operation in large pilot-scale equipment; 4) options for utilizing ITM in a coal-to-liquids (CTL) facility to enable liquids production with carbon capture were identified and studied; and 5) the benefits of potential improvements to the technology

Development of ITM Oxygen Technology for Low-cost and Low-emission Gasification and Other Industrial Applications

Energy Technology Data Exchange (ETDEWEB)

Fogash, Kevin [Air Products and Chemicals, Inc., Allentown, PA (United States)

2017-05-17

Air Products carried out a scope of work under DOE Award No. DE-FE0012065 “Development of ITM Oxygen Technology for Low-cost and Low-emission Gasification and Other Industrial Applications” with subcontractors Ceramatec, Penn State, and WorleyParsons. The scope of work under this award was aimed at furthering the development of the Ion Transport Membrane (ITM) Oxygen production process toward a demonstration-scale facility known as the Oxygen Development Facility (ODF). Specific activities will help to enable design and construction of the ODF through advancement of a number of challenging technical elements that are required to manage risk in the initial deployment of ITM technology. Major objectives of the work included developing ITM Oxygen ceramic membrane materials with improved performance and reliability, optimizing ceramic module geometry and fabrication methods, testing module performance, trialing the improved fabrication process at commercial scale in the Ceramic Membrane Module Fabrication Facility (CerFab), and advancing engineering development of the ITM oxygen production process, including vessel design and contaminant control measures to prepare for deployment of the ODF. The comprehensive report that follows details the team’s work, which includes several notable accomplishments: 1) compressive creep, a likely limiter of ceramic module lifetime in service, was demonstrated to be retarded by an order of magnitude by changes in material formulation, module joining dimensions, and internal wafer geometry; 2) two promising new materials were shown to be superior to the incumbent ITM material in a key material parameter related to oxygen flux; 3) module degradation mechanisms were identified following operation in large pilot-scale equipment; 4) options for utilizing ITM in a coal-to-liquids (CTL) facility to enable liquids production with carbon capture were identified and studied; and 5) the benefits of potential improvements to the technology

Diets with high or low protein content and glycemic index for weight-loss maintenance

DEFF Research Database (Denmark)

Larsen, Thomas Meinert; Dalskov, Stine-Mathilde; Baak, Marleen van

2010-01-01

Studies of weight-control diets that are high in protein or low in glycemic index have reached varied conclusions, probably owing to the fact that the studies had insufficient power.......Studies of weight-control diets that are high in protein or low in glycemic index have reached varied conclusions, probably owing to the fact that the studies had insufficient power....

Anatomy-driven design of a prototype video laryngoscope for extremely low birth weight infants

Science.gov (United States)

Baker, Katherine; Tremblay, Eric; Karp, Jason; Ford, Joseph; Finer, Neil; Rich, Wade

2010-11-01

Extremely low birth weight (ELBW) infants frequently require endotracheal intubation for assisted ventilation or as a route for administration of drugs or exogenous surfactant. In adults and less premature infants, the risks of this intubation can be greatly reduced using video laryngoscopy, but current products are too large and incorrectly shaped to visualize an ELBW infant's airway anatomy. We design and prototype a video laryngoscope using a miniature camera set in a curved acrylic blade with a 3×6-mm cross section at the tip. The blade provides a mechanical structure for stabilizing the tongue and acts as a light guide for an LED light source, located remotely to avoid excessive local heating at the tip. The prototype is tested on an infant manikin and found to provide sufficient image quality and mechanical properties to facilitate intubation. Finally, we show a design for a neonate laryngoscope incorporating a wafer-level microcamera that further reduces the tip cross section and offers the potential for low cost manufacture.

Synthesis and characterization of low cost magnetorheological (MR) fluids

Science.gov (United States)

Sukhwani, V. K.; Hirani, H.

2007-04-01

Magnetorheological fluids have great potential for engineering applications due to their variable rheological behavior. These fluids find applications in dampers, brakes, shock absorbers, and engine mounts. However their relatively high cost (approximately US600 per liter) limits their wide usage. Most commonly used magnetic material "Carbonyl iron" cost more than 90% of the MR fluid cost. Therefore for commercial viability of these fluids there is need of alternative economical magnetic material. In the present work synthesis of MR fluid has been attempted with objective to produce low cost MR fluid with high sedimentation stability and greater yield stress. In order to reduce the cost, economical electrolytic Iron powder (US 10 per Kg) has been used. Iron powder of relatively larger size (300 Mesh) has been ball milled to reduce their size to few microns (1 to 10 microns). Three different compositions have been prepared and compared for MR effect produced and stability. All have same base fluid (Synthetic oil) and same magnetic phase i.e. Iron particles but they have different additives. First preparation involves organic additives Polydimethylsiloxane (PDMS) and Stearic acid. Other two preparations involve use of two environmental friendly low-priced green additives guar gum (US 2 per Kg) and xanthan gum (US 12 per Kg) respectively. Magnetic properties of Iron particles have been measured by Vibrating Sample Magnetometer (VSM). Morphology of Iron particles and additives guar gum and xanthan gum has been examined by Scanning Electron Microscopy (SEM) and Particles Size Distribution (PSD) has been determined using Particle size analyzer. Microscopic images of particles, MH plots and stability of synthesized MR fluids have been reported. The prepared low cost MR fluids showed promising performance and can be effectively used for engineering applications demanding controllability in operations.

Innovative approach for low-cost quick-access small payload missions

Science.gov (United States)

Friis, Jan W., Jr.

2000-11-01

A significant part of the burgeoning commercial space industry is placing an unprecedented number of satellites into low earth orbit for a variety of new applications and services. By some estimates the commercial space industry now exceeds that of government space activities. Yet the two markets remain largely separate, with each deploying dedicated satellites and infrastructure for their respective missions. One commercial space firm, Final Analysis, has created a new program wherein either government, scientific or new technology payloads can be integrated on a commercial spacecraft on commercial satellites for a variety of mission scenarios at a fraction of the cost of a dedicated mission. NASA has recognized the advantage of this approach, and has awarded the Quick Ride program to provide frequent, low cost flight opportunities for small independent payloads aboard the Final Analysis constellation, and investigators are rapidly developing science programs that conform to the proposed payload accommodations envelope. Missions that were not feasible using dedicated launches are now receiving approval under the lower cost Quick Ride approach. Final Analysis has dedicated ten out of its thirty-eight satellites in support of the Quick Ride efforts. The benefit of this type of space access extend beyond NASA science programs. Commercial space firms can now gain valuable flight heritage for new technology and satellite product offerings. Further, emerging international space programs can now place a payload in orbit enabling the country to allocate its resources against the payload and mission requirements rather htan increased launch costs of a dedicated spacecraft. Finally, the low cost nature provides University-based research educational opportunities previously out of the reach of most space-related budgets. This paper will describe the motivation, benefits, technical features, and program costs of the Final Analysis secondary payload program. Payloads can be

Low-Budget Instrumentation of a Conventional Leg Press to Measure Reliable Isometric-Strength Capacity.

Science.gov (United States)

Baur, Heiner; Groppa, Alessia Severina; Limacher, Regula; Radlinger, Lorenz

2016-02-02

Maximum strength and rate of force development (RFD) are 2 important strength characteristics for everyday tasks and athletic performance. Measurements of both parameters must be reliable. Expensive isokinetic devices with isometric modes are often used. The possibility of cost-effective measurements in a practical setting would facilitate quality control. The purpose of this study was to assess the reliability of measurements of maximum isometric strength (Fmax) and RFD on a conventional leg press. Sixteen subjects (23 ± 2 y, 1.68 ± 0.05 m, 59 ± 5 kg) were tested twice within 1 session. After warm-up, subjects performed 2 times 5 trials eliciting maximum voluntary isometric contractions on an instrumented leg press (1- and 2-legged randomized). Fmax (N) and RFD (N/s) were extracted from force-time curves. Reliability was determined for Fmax and RFD by calculating the intraclass correlation coefficient (ICC), the test-retest variability (TRV), and the bias and limits of agreement. Reliability measures revealed good to excellent ICCs of .80-.93. TRV showed mean differences between measurement sessions of 0.4-6.9%. The systematic error was low compared with the absolute mean values (Fmax 5-6%, RFD 1-4%). The implementation of a force transducer into a conventional leg press provides a viable procedure to assess Fmax and RFD. Both performance parameters can be assessed with good to excellent reliability allowing quality control of interventions.

OBSERVATION ON INCREASE IN WEIGHT OF LOW BIRTH WEIGHT (LBW BABIES BY IMPLEMENTING KANGAROO MOTHER CARE (KMC TECHNIQUE

Directory of Open Access Journals (Sweden)

Purnendu Kumar Singh

2014-12-01

Full Text Available Kangaroo Mother Care (KMC is a practical technique for nursing of low birth weight babies by direct skin to contact with the mother. This study was undertaken to observe and record the effect of KMC with focus on increase in weight of at term low birth weight (LBW babies weighing less than 2000 grams. The study was conducted over thirty six month’s period from July 2011 to June 2014. The method of care consisted of skin to skin contact between the mother and the infant along with exclusive breast milk. Upon implementation of KMC babies under observation showed satisfactory gain in weight of average 25grams per day and an average hospital stay of 10 days. KMC aims towards achieving good weight gain in LBW babies. It is a simple hassle free technique which can be implemented at all levels of health care.

Low-Cost Experimentation for the Study of Droplet Microfluidics

Science.gov (United States)

Bardin, David; Lee, Abraham P.

2014-01-01

The continued growth of microfluidics into industry settings in areas such as point-of-care diagnostics and targeted therapeutics necessitates a workforce trained in microfluidic technologies and experimental methods. Laboratory courses for students at the university and high school levels will require cost-effective in-class demonstrations that instruct in chip design, fabrication, and experimentation at the microscale. We present a hand-operated pressure pumping system to form monodisperse picoliter to nanoliter droplet streams at low cost, and a series of exercises aimed at instructing in the specific art of droplet formation. Using this setup, the student is able to generate and observe the modes of droplet formation in flow-focusing devices, and the effect of device dimensions on the characteristics of formed droplets. Lastly, at ultra-low cost we demonstrate large plug formation in a T-junction using coffee stirrers as a master mold substitute. Our method reduces the cost of experimentation to enable intuitive instruction in droplet formation, with additional implications for creating droplets in the field or at point-of-care. PMID:25133595

Producing optical (contact) lenses by a novel low cost process

Science.gov (United States)

Skipper, Richard S.; Spencer, Ian D.

2005-09-01

The rapid and impressive growth of China has been achieved on the back of highly labour intensive industries, often in manufacturing, and at the cost of companies and jobs in Europe and America. Approaches that worked well in the 1990's to reduce production costs in the developed countries are no longer effective when confronted with the low labour costs of China and India. We have looked at contact lenses as a product that has become highly available to consumers here but as an industry that has reduced costs by moving to low labour cost countries. The question to be answered was, "Do we have the skill to still make the product in the UK, and can we make it cheap enough to export to China?" if we do not, then contact lens manufacture will move to China sooner or later. The challenge to enter the markets of the BRIC (Brazil, Russia, India and China) countries is extremely exciting as here is the new money, high growth and here is a product that sells to those with disposable incomes. To succeed we knew we had to be radical in our approach; the radical step was very simple: to devise a process in which each step added value to the customer and not cost to the product. The presentation examines the processes used by the major producers and how, by applying good manufacturing practice sound scientific principles to them, the opportunity to design a new low cost patented process was identified.

A Low-Cost Collaborative Location Scheme with GNSS and RFID for the Internet of Things

Directory of Open Access Journals (Sweden)

Changfeng Jing

2018-05-01

Full Text Available The emergence and development of the Internet of Things (IoT has attracted growing attention to low-cost location systems when facing the dramatically increased number of public infrastructure assets in smart cities. Various radio frequency identification (RFID-based locating systems have been developed. However, most of them are impractical for infrastructure asset inspection and management on a large scale due to their high cost, inefficient deployment, and complex environments such as emergencies or high-rise buildings. In this paper, we proposed a novel locating system by combing the Global Navigation Satellite System (GNSS with RFID, in which a target tag was located with one RFID reader and one GNSS receiver with sufficient accuracy for infrastructure asset management. To overcome the cost challenge, one mobile RFID reader-mounted GNSS receiver is used to simulate multiple location known reference tags. A vast number of reference tags are necessary for current RFID-based locating systems, which means higher cost. To achieve fine-grained location accuracy, we utilize a distance-based power law weight algorithm to estimate the exact coordinates. Our experiment demonstrates the effectiveness and advantages of the proposed scheme with sufficient accuracy, low cost and easy deployment on a large scale. The proposed scheme has potential applications for location-based services in smart cities.

An innovative design of small low head hydropower units for low cost decentralized production

International Nuclear Information System (INIS)

Holmen, E.; Dennehy, T.

1991-01-01

Design allowing turbine operation at heads as low as 1m and operating at a rotational speed of 500 RPM at a flow of 2.6m 3 /s and a runner diameter of 700 mm. This eliminates the need for a gear box and helps in achieving efficiency of 60% in the case of a 21 kW installation at a 1m head site and 85% with a 69 kW 3.2m head site. Present turbine designs for such low head sites are very expensive to produce and have a low efficiency. The design uses an all plastic waterway, guide vane assembly and reinforced plastic runner blades. There will be a short pay-back period, for example 4.5 years in the case of a 21 kW unit and 2.0 years in case of the 69 kW unit. These payback periods assume a cost per kW of 0.00 ECU. Design is attractive for decentralized production. 3 figs

Optimization Method of a Low Cost, High Performance Ceramic Proppant by Orthogonal Experimental Design

Science.gov (United States)

Zhou, Y.; Tian, Y. M.; Wang, K. Y.; Li, G.; Zou, X. W.; Chai, Y. S.

2017-09-01

This study focused on optimization method of a ceramic proppant material with both low cost and high performance that met the requirements of Chinese Petroleum and Gas Industry Standard (SY/T 5108-2006). The orthogonal experimental design of L9(34) was employed to study the significance sequence of three factors, including weight ratio of white clay to bauxite, dolomite content and sintering temperature. For the crush resistance, both the range analysis and variance analysis reflected the optimally experimental condition was weight ratio of white clay to bauxite=3/7, dolomite content=3 wt.%, temperature=1350°C. For the bulk density, the most important factor was the sintering temperature, followed by the dolomite content, and then the ratio of white clay to bauxite.

Development of Innovative Technology to Provide Low-Cost Surface Atmospheric Observations

Science.gov (United States)

Kucera, Paul; Steinson, Martin

2016-04-01

Accurate and reliable real-time monitoring and dissemination of observations of surface weather conditions is critical for a variety of societal applications. Applications that provide local and regional information about temperature, precipitation, moisture, and winds, for example, are important for agriculture, water resource monitoring, health, and monitoring of hazard weather conditions. In many regions in Africa (and other global locations), surface weather stations are sparsely located and/or of poor quality. Existing stations have often been sited incorrectly, not well-maintained, and have limited communications established at the site for real-time monitoring. The US National Weather Service (NWS) International Activities Office (IAO) in partnership with University Corporation for Atmospheric Research (UCAR)/National Center for Atmospheric Research (NCAR) and funded by the United States Agency for International Development (USAID) Office of Foreign Disaster Assistance (OFDA) has started an initiative to develop and deploy low-cost weather instrumentation in sparsely observed regions of the world. The goal is to provide observations for environmental monitoring, and early warning alert systems that can be deployed at weather services in developing countries. Instrumentation is being designed using innovative new technologies such as 3D printers, Raspberry Pi computing systems, and wireless communications. The initial effort is focused on designing a surface network using GIS-based tools, deploying an initial network in Zambia, and providing training to Zambia Meteorological Department (ZMD) staff. The presentation will provide an overview of the project concepts, design of the low cost instrumentation, and initial experiences deploying a surface network deployment in Zambia.

CAIRSENSE-Atlanta Low Cost Sensor Evaluation Versus Reference Monitors

Data.gov (United States)

U.S. Environmental Protection Agency — Short time interval comparisons of low cost sensor response and corresponding Federal Reference or Federal Equivalent Monitors at an NCOR site located in proximity...

Feasibility of a low-cost hearing screening in rural Indiana

Directory of Open Access Journals (Sweden)

Khalid M. Khan

2017-09-01

Full Text Available Abstract Background Hearing loss remains a neglected public health issue in the rural and agricultural communities in the United States and therefore, promotion of a low-cost hearing screening may be important for these underserved populations. The major objectives of our study were to assess feasibility of a low-cost telephone-administered hearing test in rural Indiana and to identify the challenges, barriers and viable implementation strategies associated with this test. Also, we evaluated whether a focus group session could change the hearing health attitude of rural residents. Methods We recruited 126 adults from six rural Indiana counties who participated in study activities in the following order: 1 a pre-focus group demographic, knowledge and attitude survey, 2 a focus group for discussing the feasibility of a telephone-administered hearing screening, 3 a post focus group attitude survey and 4 hearing was screened using an audiometer and self-assessment scale. These activities generated both qualitative and quantitative data, which were subsequently analyzed. Results Hearing impairment was perceived as an important public health issue. Many participants expressed interests to try the low-cost National Hearing Test (NHT. However, participants recommended NHT to be facilitated by community organizations to provide access to landline phones. The focus group turned out to be an excellent awareness building activity producing significant improvement in hearing health attitudes. Comparison of self and audiometric evaluations indicated underestimation of hearing handicap in our rural study population. Conclusions The study results underscore the urgent need for an effective strategy to promote low-cost hearing screening in rural US communities.

Efficacy of a low-cost bubble CPAP system in treatment of respiratory distress in a neonatal ward in Malawi.

Directory of Open Access Journals (Sweden)

Kondwani Kawaza

Full Text Available Respiratory failure is a leading cause of neonatal mortality in the developing world. Bubble continuous positive airway pressure (bCPAP is a safe, effective intervention for infants with respiratory distress and is widely used in developed countries. Because of its high cost, bCPAP is not widely utilized in low-resource settings. We evaluated the performance of a new bCPAP system to treat severe respiratory distress in a low resource setting, comparing it to nasal oxygen therapy, the current standard of care.We conducted a non-randomized convenience sample study to test the efficacy of a low-cost bCPAP system treating newborns with severe respiratory distress in the neonatal ward of Queen Elizabeth Central Hospital, in Blantyre, Malawi. Neonates weighing >1,000 g and presenting with severe respiratory distress who fulfilled inclusion criteria received nasal bCPAP if a device was available; if not, they received standard care. Clinical assessments were made during treatment and outcomes compared for the two groups.87 neonates (62 bCPAP, 25 controls were recruited. Survival rate for neonates receiving bCPAP was 71.0% (44/62 compared with 44.0% (11/25 for controls. 65.5% (19/29 of very low birth weight neonates receiving bCPAP survived to discharge compared to 15.4% (1/13 of controls. 64.6% (31/48 of neonates with respiratory distress syndrome (RDS receiving bCPAP survived to discharge, compared to 23.5% (4/17 of controls. 61.5% (16/26 of neonates with sepsis receiving bCPAP survived to discharge, while none of the seven neonates with sepsis in the control group survived.Use of a low-cost bCPAP system to treat neonatal respiratory distress resulted in 27% absolute improvement in survival. The beneficial effect was greater for neonates with very low birth weight, RDS, or sepsis. Implementing appropriate bCPAP devices could reduce neonatal mortality in developing countries.

Efficacy of a low-cost bubble CPAP system in treatment of respiratory distress in a neonatal ward in Malawi.

Science.gov (United States)

Kawaza, Kondwani; Machen, Heather E; Brown, Jocelyn; Mwanza, Zondiwe; Iniguez, Suzanne; Gest, Al; Smith, E O'Brian; Oden, Maria; Richards-Kortum, Rebecca R; Molyneux, Elizabeth

2014-01-01

Respiratory failure is a leading cause of neonatal mortality in the developing world. Bubble continuous positive airway pressure (bCPAP) is a safe, effective intervention for infants with respiratory distress and is widely used in developed countries. Because of its high cost, bCPAP is not widely utilized in low-resource settings. We evaluated the performance of a new bCPAP system to treat severe respiratory distress in a low resource setting, comparing it to nasal oxygen therapy, the current standard of care. We conducted a non-randomized convenience sample study to test the efficacy of a low-cost bCPAP system treating newborns with severe respiratory distress in the neonatal ward of Queen Elizabeth Central Hospital, in Blantyre, Malawi. Neonates weighing >1,000 g and presenting with severe respiratory distress who fulfilled inclusion criteria received nasal bCPAP if a device was available; if not, they received standard care. Clinical assessments were made during treatment and outcomes compared for the two groups. 87 neonates (62 bCPAP, 25 controls) were recruited. Survival rate for neonates receiving bCPAP was 71.0% (44/62) compared with 44.0% (11/25) for controls. 65.5% (19/29) of very low birth weight neonates receiving bCPAP survived to discharge compared to 15.4% (1/13) of controls. 64.6% (31/48) of neonates with respiratory distress syndrome (RDS) receiving bCPAP survived to discharge, compared to 23.5% (4/17) of controls. 61.5% (16/26) of neonates with sepsis receiving bCPAP survived to discharge, while none of the seven neonates with sepsis in the control group survived. Use of a low-cost bCPAP system to treat neonatal respiratory distress resulted in 27% absolute improvement in survival. The beneficial effect was greater for neonates with very low birth weight, RDS, or sepsis. Implementing appropriate bCPAP devices could reduce neonatal mortality in developing countries.

Relatively high-protein or 'low-carb' energy-restricted diets for body weight loss and body weight maintenance?

Science.gov (United States)

Soenen, Stijn; Bonomi, Alberto G; Lemmens, Sofie G T; Scholte, Jolande; Thijssen, Myriam A M A; van Berkum, Frank; Westerterp-Plantenga, Margriet S

2012-10-10

'Low-carb' diets have been suggested to be effective in body weight (BW) management. However, these diets are relatively high in protein as well. To unravel whether body-weight loss and weight-maintenance depends on the high-protein or the 'low-carb' component of the diet. Body-weight (BW), fat mass (FM), blood- and urine-parameters of 132 participants (age=50 ± 12 yr; BW=107 ± 20 kg; BMI=37 ± 6 kg/m(2); FM=47.5 ± 11.9 kg) were compared after 3 and 12 months between four energy-restricted diets with 33% of energy requirement for the first 3 months, and 67% for the last 9 months: normal-protein normal-carbohydrate (NPNC), normal-protein low-carbohydrate (NPLC); high-protein normal-carbohydrate (HPNC), high-protein low-carbohydrate (HPLC); 24h N-analyses confirmed daily protein intakes for the normal-protein diets of 0.7 ± 0.1 and for the high-protein diets of 1.1 ± 0.2g/kg BW (pvs. NP (-11.5 ± 4 kg; -9.3 ± 0.7 kg) (pvs. NC (-12.3 ± 3 kg; -10.3 ± 1.1 kg) (ns). Diet × time interaction showed HPLC (-14.7 ± 5 kg; -11.9 ± 1.6 kg) vs. HPNC (-13.8 ± 3 kg; -11.9 ± 1.8 kg) (ns); NPLC (-12.2 ± 4 kg; -10.0 ± 0.8 kg) vs. NPNC (-10.7 ± 4 kg; -8.6 ± 0.7 kg) (ns); HPLC vs. NPLC (pvs. NPNC (pvs. NP (-8.9 ± 3 kg; -7.7 ± 0.6 kg) (pvs. NC (11.1 ± 3 kg; 9.3 ± 0.7 kg) (ns). Diet × time interaction showed HPLC (-11.6 ± 5 kg ; -8.2 ± 0.7 kg) vs. HPNC (-14.1 ± 4 kg; -10.0 ± 0.9 kg) (ns); NPNC (-8.2 ± 3 kg; -6.7 ± 0.6 kg) vs. NPLC (-9.7 ± 3 kg; -8.5 ± 0.7 kg) (ns); HPLC vs. NPLC (pvs. NPNC (pvs. all other diets reduced diastolic blood pressure more. Relationships between changes in BW, FM, FFM or metabolic parameters and energy percentage of fat in the diet were not statistically significant. Metabolic profile and fat-free-mass were improved following weight-loss. Body-weight loss and weight-maintenance depends on the high-protein, but not on the 'low-carb' component of the diet, while it is unrelated to the concomitant fat-content of the diet. Copyright �