WorldWideScience

Sample records for reliable life support

  1. Developing Reliable Life Support for Mars

    Science.gov (United States)

    Jones, Harry W.

    2017-01-01

    A human mission to Mars will require highly reliable life support systems. Mars life support systems may recycle water and oxygen using systems similar to those on the International Space Station (ISS). However, achieving sufficient reliability is less difficult for ISS than it will be for Mars. If an ISS system has a serious failure, it is possible to provide spare parts, or directly supply water or oxygen, or if necessary bring the crew back to Earth. Life support for Mars must be designed, tested, and improved as needed to achieve high demonstrated reliability. A quantitative reliability goal should be established and used to guide development t. The designers should select reliable components and minimize interface and integration problems. In theory a system can achieve the component-limited reliability, but testing often reveal unexpected failures due to design mistakes or flawed components. Testing should extend long enough to detect any unexpected failure modes and to verify the expected reliability. Iterated redesign and retest may be required to achieve the reliability goal. If the reliability is less than required, it may be improved by providing spare components or redundant systems. The number of spares required to achieve a given reliability goal depends on the component failure rate. If the failure rate is under estimated, the number of spares will be insufficient and the system may fail. If the design is likely to have undiscovered design or component problems, it is advisable to use dissimilar redundancy, even though this multiplies the design and development cost. In the ideal case, a human tended closed system operational test should be conducted to gain confidence in operations, maintenance, and repair. The difficulty in achieving high reliability in unproven complex systems may require the use of simpler, more mature, intrinsically higher reliability systems. The limitations of budget, schedule, and technology may suggest accepting lower and

  2. Reliability Growth in Space Life Support Systems

    Science.gov (United States)

    Jones, Harry W.

    2014-01-01

    A hardware system's failure rate often increases over time due to wear and aging, but not always. Some systems instead show reliability growth, a decreasing failure rate with time, due to effective failure analysis and remedial hardware upgrades. Reliability grows when failure causes are removed by improved design. A mathematical reliability growth model allows the reliability growth rate to be computed from the failure data. The space shuttle was extensively maintained, refurbished, and upgraded after each flight and it experienced significant reliability growth during its operational life. In contrast, the International Space Station (ISS) is much more difficult to maintain and upgrade and its failure rate has been constant over time. The ISS Carbon Dioxide Removal Assembly (CDRA) reliability has slightly decreased. Failures on ISS and with the ISS CDRA continue to be a challenge.

  3. Ultra Reliable Closed Loop Life Support for Long Space Missions

    Science.gov (United States)

    Jones, Harry W.; Ewert, Michael K.

    2010-01-01

    Spacecraft human life support systems can achieve ultra reliability by providing sufficient spares to replace all failed components. The additional mass of spares for ultra reliability is approximately equal to the original system mass, provided that the original system reliability is not too low. Acceptable reliability can be achieved for the Space Shuttle and Space Station by preventive maintenance and by replacing failed units. However, on-demand maintenance and repair requires a logistics supply chain in place to provide the needed spares. In contrast, a Mars or other long space mission must take along all the needed spares, since resupply is not possible. Long missions must achieve ultra reliability, a very low failure rate per hour, since they will take years rather than weeks and cannot be cut short if a failure occurs. Also, distant missions have a much higher mass launch cost per kilogram than near-Earth missions. Achieving ultra reliable spacecraft life support systems with acceptable mass will require a well-planned and extensive development effort. Analysis must determine the reliability requirement and allocate it to subsystems and components. Ultra reliability requires reducing the intrinsic failure causes, providing spares to replace failed components and having "graceful" failure modes. Technologies, components, and materials must be selected and designed for high reliability. Long duration testing is needed to confirm very low failure rates. Systems design should segregate the failure causes in the smallest, most easily replaceable parts. The system must be designed, developed, integrated, and tested with system reliability in mind. Maintenance and reparability of failed units must not add to the probability of failure. The overall system must be tested sufficiently to identify any design errors. A program to develop ultra reliable space life support systems with acceptable mass should start soon since it must be a long term effort.

  4. Developing Ultra Reliable Life Support for the Moon and Mars

    Science.gov (United States)

    Jones, Harry W.

    2009-01-01

    Recycling life support systems can achieve ultra reliability by using spares to replace failed components. The added mass for spares is approximately equal to the original system mass, provided the original system reliability is not very low. Acceptable reliability can be achieved for the space shuttle and space station by preventive maintenance and by replacing failed units, However, this maintenance and repair depends on a logistics supply chain that provides the needed spares. The Mars mission must take all the needed spares at launch. The Mars mission also must achieve ultra reliability, a very low failure rate per hour, since it requires years rather than weeks and cannot be cut short if a failure occurs. Also, the Mars mission has a much higher mass launch cost per kilogram than shuttle or station. Achieving ultra reliable space life support with acceptable mass will require a well-planned and extensive development effort. Analysis must define the reliability requirement and allocate it to subsystems and components. Technologies, components, and materials must be designed and selected for high reliability. Extensive testing is needed to ascertain very low failure rates. Systems design should segregate the failure causes in the smallest, most easily replaceable parts. The systems must be designed, produced, integrated, and tested without impairing system reliability. Maintenance and failed unit replacement should not introduce any additional probability of failure. The overall system must be tested sufficiently to identify any design errors. A program to develop ultra reliable space life support systems with acceptable mass must start soon if it is to produce timely results for the moon and Mars.

  5. Water Walls: Highly Reliable and Massively Redundant Life Support Architecture

    Data.gov (United States)

    National Aeronautics and Space Administration — WATER WALLS (WW) takes an approach to providing a life support system, Forward Osmosis (FO), that is biologically and chemically passive, using mechanical systems...

  6. The Reliability of Turkish "Basic Life Support" and "Cardiac Massage" Videos Uploaded to Websites.

    Science.gov (United States)

    Elicabuk, Hayri; Yaylacı, Serpil; Yilmaz, Atakan; Hatipoglu, Celile; Kaya, F Gokhan; Serinken, Mustafa

    2016-02-01

    In this study, the reliability of Turkish cardiac massage and Basic Life Support (BLS) videos, which have already been downloaded from three website such as YouTube, Google, Yahoo following the publication of 2010 cardiopulmonary resuscitation (CPR) guideline and their suitability to the same guideline were researched. The videos uploaded to the three web-site to search videos on internet were queried by using the keywords "cardiac massage" and "basic life support". Videos that had been uploaded between January 2011 and July 2014 were analyzed and scored by two experienced emergency specialists. A total of 1126 videos were obtained. 1029 of the videos (91.4%) were excluded by researchers. 97 videos were detected to accord with study criteria. Despite most of the videos were found on Google website by keywords, the enormous part of videos proper to criteria were sourced from YouTube website (n=65, 67.0%). One fourth of the videos (24.7%) were observed to not be suitable for 2010 CPR guideline. AED usage was mentioned slightly in the videos (14.4%). Median score of the videos is 5 (IQR: 4-6). The rate and scores of the videos uploaded by official institution or association were significantly higher than others (p=0.007 and 0.006, respectively). Moreover, scores of the videos compatible with guidelines uploaded by official institution or association and medical personal were also found higher (p=0.001). Eventually, all the data obtained in this study support that Turkish videos were not reliable on the subject of BLS and cardiac massage. It is promising that videos with high follow-up rates also have been scored higher.

  7. Are YouTube videos accurate and reliable on basic life support and cardiopulmonary resuscitation?

    Science.gov (United States)

    Yaylaci, Serpil; Serinken, Mustafa; Eken, Cenker; Karcioglu, Ozgur; Yilmaz, Atakan; Elicabuk, Hayri; Dal, Onur

    2014-10-01

    The objective of this study is to investigate reliability and accuracy of the information on YouTube videos related to CPR and BLS in accord with 2010 CPR guidelines. YouTube was queried using four search terms 'CPR', 'cardiopulmonary resuscitation', 'BLS' and 'basic life support' between 2011 and 2013. Sources that uploaded the videos, the record time, the number of viewers in the study period, inclusion of human or manikins were recorded. The videos were rated if they displayed the correct order of resuscitative efforts in full accord with 2010 CPR guidelines or not. Two hundred and nine videos meeting the inclusion criteria after the search in YouTube with four search terms ('CPR', 'cardiopulmonary resuscitation', 'BLS' and 'basic life support') comprised the study sample subjected to the analysis. Median score of the videos is 5 (IQR: 3.5-6). Only 11.5% (n = 24) of the videos were found to be compatible with 2010 CPR guidelines with regard to sequence of interventions. Videos uploaded by 'Guideline bodies' had significantly higher rates of download when compared with the videos uploaded by other sources. Sources of the videos and date of upload (year) were not shown to have any significant effect on the scores received (P = 0.615 and 0.513, respectively). The videos' number of downloads did not differ according to the videos compatible with the guidelines (P = 0.832). The videos downloaded more than 10,000 times had a higher score than the others (P = 0.001). The majority of You-Tube video clips purporting to be about CPR are not relevant educational material. Of those that are focused on teaching CPR, only a small minority optimally meet the 2010 Resucitation Guidelines. © 2014 Australasian College for Emergency Medicine and Australasian Society for Emergency Medicine.

  8. Assessment of Advanced Life Support competence when combining different test methods--reliability and validity

    DEFF Research Database (Denmark)

    Ringsted, C; Lippert, F; Hesselfeldt, R

    2007-01-01

    Cardiac Arrest Simulation Test (CASTest) scenarios for the assessments according to guidelines 2005. AIMS: To analyse the reliability and validity of the individual sub-tests provided by ERC and to find a combination of MCQ and CASTest that provides a reliable and valid single effect measure of ALS...... that possessed high reliability, equality of test sets, and ability to discriminate between the two groups of supposedly different ALS competence. CONCLUSIONS: ERC sub-tests of ALS competence possess sufficient reliability and validity. A combined ALS score with equal weighting of one MCQ and one CASTest can...... competence. METHODS: Two groups of participants were included in this randomised, controlled experimental study: a group of newly graduated doctors, who had not taken the ALS course (N=17) and a group of students, who had passed the ALS course 9 months before the study (N=16). Reliability in terms of inter...

  9. Maintenance, reliability and policies for orbital space station life support systems

    International Nuclear Information System (INIS)

    Russell, James F.; Klaus, David M.

    2007-01-01

    The performance of productive work on space missions is critical to sustaining a human presence on orbital space stations (OSS), the Moon, or Mars. Available time for productive work has potentially been impacted on past OSS missions by underestimating the crew time needed to maintain systems, such as the Environmental Control and Life Support System (ECLSS). To determine the cause of this apparent disconnect between the design and operation of an OSS, documented crew time for maintenance was collected from the three Skylab missions and Increments 4-8 on the International Space Station (ISS), and the data was contrasted to terrestrial facility maintenance norms. The results of the ISS analysis showed that for four operational and seven functional categories, the largest deviation of 60.4% over the design time was caused by three of the four operational categories not being quantitatively included in the design documents. In a cross category analysis, 35.3% of the crew time was found to have been used to repair air and waste handling systems. The air system required additional crew time for maintenance due to a greater than expected failure rate and resultant increased time needed for repairs. Therefore, it appears that the disconnect between the design time and actual operations for ECLSS maintenance on ISS was caused by excluding non-repair activities from the estimates and experiencing greater than expected technology maintenance requirements. Based on these ISS and Skylab analyses, future OSS designs (and possibly lunar and Martian missions as well) should consider 3.0-3.3 h/day for crews of 2 to 3 as a baseline of crew time needed for ECLSS maintenance

  10. Proceedings of the international workshop on reliability data collection in support of PSA, maintenance and life-assurance programmes

    International Nuclear Information System (INIS)

    1996-01-01

    The utilisation of data to support Probabilistic Safety Assessments, Maintenance Activities and Life-Assurance Programmes is becoming more widely recognized as these areas become more and more developed throughout the nuclear industry. Almost every member country of the OECD Nuclear Energy Agency uses PSA in one way or another in their assessment of nuclear power plant safety. A majority of utilities and licensees have completed or are in the process of planning plant specific PSAs. Operability costs associated with maintenance activities and life assurance programmes are highly dependent upon the data and how it is utilized. Considering these statements and the various suggestions made, the Workshop addressed the following topics concerning reliability data collection: data compilation systems; data bases development and management; data application; parameter estimation; common cause failure and dependent failure data

  11. Proceedings of the international workshop on reliability data collection in support of PSA, maintenance and life-assurance programmes

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-07-01

    The utilisation of data to support Probabilistic Safety Assessments, Maintenance Activities and Life-Assurance Programmes is becoming more widely recognized as these areas become more and more developed throughout the nuclear industry. Almost every member country of the OECD Nuclear Energy Agency uses PSA in one way or another in their assessment of nuclear power plant safety. A majority of utilities and licensees have completed or are in the process of planning plant specific PSAs. Operability costs associated with maintenance activities and life assurance programmes are highly dependent upon the data and how it is utilized. Considering these statements and the various suggestions made, the Workshop addressed the following topics concerning reliability data collection: data compilation systems; data bases development and management; data application; parameter estimation; common cause failure and dependent failure data

  12. Starship Life Support

    Science.gov (United States)

    Jones, Harry W.

    2009-01-01

    The design and mass cost of a starship and its life support system are investigated. The mission plan for a multi generational interstellar voyage to colonize a new planet is used to describe the starship design, including the crew habitat, accommodations, and life support. Only current technology is assumed. Highly reliable life support systems can be provided with reasonably small additional mass, suggesting that they can support long duration missions. Bioregenerative life support, growing crop plants that provide food, water, and oxygen, has been thought to need less mass than providing stored food for long duration missions. The large initial mass of hydroponics systems is paid for over time by saving the mass of stored food. However, the yearly logistics mass required to support a bioregenerative system exceeds the mass of food solids it produces, so that supplying stored dehydrated food always requires less mass than bioregenerative food production. A mixed system that grows about half the food and supplies the other half dehydrated has advantages that allow it to breakeven with stored dehydrated food in about 66 years. However, moderate increases in the hydroponics system mass to achieve high reliability, such as adding spares that double the system mass and replacing the initial system every 100 years, increase the mass cost of bioregenerative life support. In this case, the high reliability half food growing, half food supplying system does not breakeven for 389 years. An even higher reliability half and half system, with three times original system mass and replacing the system every 50 years, never breaks even. Growing food for starship life support requires more mass than providing dehydrated food, even for multigeneration voyages of hundreds of years. The benefits of growing some food may justify the added mass cost. Much more efficient recycling food production is wanted but may not be possible. A single multigenerational interstellar voyage to

  13. Analyses of inter-rater reliability between professionals, medical students and trained school children as assessors of basic life support skills.

    Science.gov (United States)

    Beck, Stefanie; Ruhnke, Bjarne; Issleib, Malte; Daubmann, Anne; Harendza, Sigrid; Zöllner, Christian

    2016-10-07

    Training of lay-rescuers is essential to improve survival-rates after cardiac arrest. Multiple campaigns emphasise the importance of basic life support (BLS) training for school children. Trainings require a valid assessment to give feedback to school children and to compare the outcomes of different training formats. Considering these requirements, we developed an assessment of BLS skills using MiniAnne and tested the inter-rater reliability between professionals, medical students and trained school children as assessors. Fifteen professional assessors, 10 medical students and 111-trained school children (peers) assessed 1087 school children at the end of a CPR-training event using the new assessment format. Analyses of inter-rater reliability (intraclass correlation coefficient; ICC) were performed. Overall inter-rater reliability of the summative assessment was high (ICC = 0.84, 95 %-CI: 0.84 to 0.86, n = 889). The number of comparisons between peer-peer assessors (n = 303), peer-professional assessors (n = 339), and peer-student assessors (n = 191) was adequate to demonstrate high inter-rater reliability between peer- and professional-assessors (ICC: 0.76), peer- and student-assessors (ICC: 0.88) and peer- and other peer-assessors (ICC: 0.91). Systematic variation in rating of specific items was observed for three items between professional- and peer-assessors. Using this assessment and integrating peers and medical students as assessors gives the opportunity to assess hands-on skills of school children with high reliability.

  14. Developing Sustainable Life Support System Concepts

    Science.gov (United States)

    Thomas, Evan A.

    2010-01-01

    Sustainable spacecraft life support concepts may allow the development of more reliable technologies for long duration space missions. Currently, life support technologies at different levels of development are not well evaluated against each other, and evaluation methods do not account for long term reliability and sustainability of the hardware. This paper presents point-of-departure sustainability evaluation criteria for life support systems, that may allow more robust technology development, testing and comparison. An example sustainable water recovery system concept is presented.

  15. NextSTEP Hybrid Life Support

    Data.gov (United States)

    National Aeronautics and Space Administration — NextSTEP Phase I Hybrid Life Support Systems (HLSS) effort assessed options, performance, and reliability for various mission scenarios using contractor-developed...

  16. Advanced Cardiac Life Support.

    Science.gov (United States)

    Kirkwood Community Coll., Cedar Rapids, IA.

    This document contains materials for an advanced college course in cardiac life support developed for the State of Iowa. The course syllabus lists the course title, hours, number, description, prerequisites, learning activities, instructional units, required text, six references, evaluation criteria, course objectives by units, course…

  17. [Habitability and life support systems].

    Science.gov (United States)

    Nefedov, Iu G; Adamovich, B A

    1988-01-01

    This paper discusses various aspects of space vehicle habitability and life support systems. It describes variations in the chemical and microbial composition of an enclosed atmosphere during prolonged real and simulated flights. The paper gives a detailed description of life support systems and environmental investigations onboard the Mir station. It also outlines the development of space vehicle habitability and life support systems as related to future flights.

  18. Piping reliability improvement through passive seismic supports

    International Nuclear Information System (INIS)

    Baltus, R.; Rubbers, A.

    1999-01-01

    The nuclear plants designed in the 1970's were equipped with large quantities of snubbers in auxiliary piping systems. The experience revealed a poor performance of snubbers during periodic inspection, while non-nuclear facility piping survived through strong earthquakes. Consequently, seismic design rules evolved towards more realistic criteria and passive dynamic supports were developed to reduce snubber quantities. These solutions improve the pipe reliability during normal operation while reducing the radiation exposure in a sample line is presented with the impact on pipe stresses compared to the results obtained with passive supports named Limit Stops. (author)

  19. Life Support for Deep Space and Mars

    Science.gov (United States)

    Jones, Harry W.; Hodgson, Edward W.; Kliss, Mark H.

    2014-01-01

    How should life support for deep space be developed? The International Space Station (ISS) life support system is the operational result of many decades of research and development. Long duration deep space missions such as Mars have been expected to use matured and upgraded versions of ISS life support. Deep space life support must use the knowledge base incorporated in ISS but it must also meet much more difficult requirements. The primary new requirement is that life support in deep space must be considerably more reliable than on ISS or anywhere in the Earth-Moon system, where emergency resupply and a quick return are possible. Due to the great distance from Earth and the long duration of deep space missions, if life support systems fail, the traditional approaches for emergency supply of oxygen and water, emergency supply of parts, and crew return to Earth or escape to a safe haven are likely infeasible. The Orbital Replacement Unit (ORU) maintenance approach used by ISS is unsuitable for deep space with ORU's as large and complex as those originally provided in ISS designs because it minimizes opportunities for commonality of spares, requires replacement of many functional parts with each failure, and results in substantial launch mass and volume penalties. It has become impractical even for ISS after the shuttle era, resulting in the need for ad hoc repair activity at lower assembly levels with consequent crew time penalties and extended repair timelines. Less complex, more robust technical approaches may be needed to meet the difficult deep space requirements for reliability, maintainability, and reparability. Developing an entirely new life support system would neglect what has been achieved. The suggested approach is use the ISS life support technologies as a platform to build on and to continue to improve ISS subsystems while also developing new subsystems where needed to meet deep space requirements.

  20. NASA Advanced Exploration Systems: Advancements in Life Support Systems

    Science.gov (United States)

    Shull, Sarah A.; Schneider, Walter F.

    2016-01-01

    The NASA Advanced Exploration Systems (AES) Life Support Systems (LSS) project strives to develop reliable, energy-efficient, and low-mass spacecraft systems to provide environmental control and life support systems (ECLSS) critical to enabling long duration human missions beyond low Earth orbit (LEO). Highly reliable, closed-loop life support systems are among the capabilities required for the longer duration human space exploration missions assessed by NASA’s Habitability Architecture Team.

  1. Life Support Systems: Environmental Monitoring

    Data.gov (United States)

    National Aeronautics and Space Administration — The Advanced Exploration Systems (AES) Life Support Systems project Environmental Monitoring (EM) systems task objectives are to develop and demonstrate onboard...

  2. Introduction to Life Support Systems

    Science.gov (United States)

    Perry, Jay

    2017-01-01

    This course provides an introduction to the design and development of life support systems to sustain humankind in the harsh environment of space. The life support technologies necessary to provide a respirable atmosphere and clean drinking water are emphasized in the course. A historical perspective, beginning with open loop systems employed aboard the earliest crewed spacecraft through the state-of-the-art life support technology utilized aboard the International Space Station today, will provide a framework for students to consider applications to possible future exploration missions and destinations which may vary greatly in duration and scope. Development of future technologies as well as guiding requirements for designing life support systems for crewed exploration missions beyond low-Earth orbit are also considered in the course.

  3. Advanced Life Support Project Plan

    Science.gov (United States)

    2002-01-01

    Life support systems are an enabling technology and have become integral to the success of living and working in space. As NASA embarks on human exploration and development of space to open the space frontier by exploring, using and enabling the development of space and to expand the human experience into the far reaches of space, it becomes imperative, for considerations of safety, cost, and crew health, to minimize consumables and increase the autonomy of the life support system. Utilizing advanced life support technologies increases this autonomy by reducing mass, power, and volume necessary for human support, thus permitting larger payload allocations for science and exploration. Two basic classes of life support systems must be developed, those directed toward applications on transportation/habitation vehicles (e.g., Space Shuttle, International Space Station (ISS), next generation launch vehicles, crew-tended stations/observatories, planetary transit spacecraft, etc.) and those directed toward applications on the planetary surfaces (e.g., lunar or Martian landing spacecraft, planetary habitats and facilities, etc.). In general, it can be viewed as those systems compatible with microgravity and those compatible with hypogravity environments. Part B of the Appendix defines the technology development 'Roadmap' to be followed in providing the necessary systems for these missions. The purpose of this Project Plan is to define the Project objectives, Project-level requirements, the management organizations responsible for the Project throughout its life cycle, and Project-level resources, schedules and controls.

  4. Finite element reliability analysis of fatigue life

    International Nuclear Information System (INIS)

    Harkness, H.H.; Belytschko, T.; Liu, W.K.

    1992-01-01

    Fatigue reliability is addressed by the first-order reliability method combined with a finite element method. Two-dimensional finite element models of components with cracks in mode I are considered with crack growth treated by the Paris law. Probability density functions of the variables affecting fatigue are proposed to reflect a setting where nondestructive evaluation is used, and the Rosenblatt transformation is employed to treat non-Gaussian random variables. Comparisons of the first-order reliability results and Monte Carlo simulations suggest that the accuracy of the first-order reliability method is quite good in this setting. Results show that the upper portion of the initial crack length probability density function is crucial to reliability, which suggests that if nondestructive evaluation is used, the probability of detection curve plays a key role in reliability. (orig.)

  5. Mathematical Methods in Survival Analysis, Reliability and Quality of Life

    CERN Document Server

    Huber, Catherine; Mesbah, Mounir

    2008-01-01

    Reliability and survival analysis are important applications of stochastic mathematics (probability, statistics and stochastic processes) that are usually covered separately in spite of the similarity of the involved mathematical theory. This title aims to redress this situation: it includes 21 chapters divided into four parts: Survival analysis, Reliability, Quality of life, and Related topics. Many of these chapters were presented at the European Seminar on Mathematical Methods for Survival Analysis, Reliability and Quality of Life in 2006.

  6. Life Support with Failures and Variable Supply

    Science.gov (United States)

    Jones, Harry

    2010-01-01

    The life support system for long duration missions will recycle oxygen and water to reduce the material resupply mass from Earth. The impact of life support failures was investigated by dynamic simulation of a lunar outpost habitat life support model. The model was modified to simulate resupply delays, power failures, recycling system failures, and storage failures. Many failures impact the lunar outpost water supply directly or indirectly, depending on the water balance and water storage. Failure effects on the water supply are reduced if Extra Vehicular Activity (EVA) water use is low and the water supply is ample. Additional oxygen can be supplied by scavenging unused propellant or by production from regolith, but the amounts obtained can vary significantly. The requirements for oxygen and water can also vary significantly, especially for EVA. Providing storage buffers can improve efficiency and reliability, and minimize the chance of supply failing to meet demand. Life support failures and supply variations can be survivable if effective solutions are provided by the system design

  7. Axiomatic Design of Space Life Support Systems

    Science.gov (United States)

    Jones, Harry W.

    2017-01-01

    Systems engineering is an organized way to design and develop systems, but the initial system design concepts are usually seen as the products of unexplained but highly creative intuition. Axiomatic design is a mathematical approach to produce and compare system architectures. The two axioms are:- Maintain the independence of the functional requirements.- Minimize the information content (or complexity) of the design. The first axiom generates good system design structures and the second axiom ranks them. The closed system human life support architecture now implemented in the International Space Station has been essentially unchanged for fifty years. In contrast, brief missions such as Apollo and Shuttle have used open loop life support. As mission length increases, greater system closure and increased recycling become more cost-effective.Closure can be gradually increased, first recycling humidity condensate, then hygiene wastewater, urine, carbon dioxide, and water recovery brine. A long term space station or planetary base could implement nearly full closure, including food production. Dynamic systems theory supports the axioms by showing that fewer requirements, fewer subsystems, and fewer interconnections all increase system stability. If systems are too complex and interconnected, reliability is reduced and operations and maintenance become more difficult. Using axiomatic design shows how the mission duration and other requirements determine the best life support system design including the degree of closure.

  8. Next Generation Life Support Project Status

    Science.gov (United States)

    Barta, Daniel J.; Chullen, Cinda; Vega, Leticia; Cox, Marlon R.; Aitchison, Lindsay T.; Lange, Kevin E.; Pensinger, Stuart J.; Meyer, Caitlin E.; Flynn, Michael; Jackson, W. Andrew; hide

    2014-01-01

    Next Generation Life Support (NGLS) is one of over twenty technology development projects sponsored by NASA's Game Changing Development Program. The NGLS Project develops selected life support technologies needed for humans to live and work productively in space, with focus on technologies for future use in spacecraft cabin and space suit applications. Over the last three years, NGLS had five main project elements: Variable Oxygen Regulator (VOR), Rapid Cycle Amine (RCA) swing bed, High Performance (HP) Extravehicular Activity (EVA) Glove, Alternative Water Processor (AWP) and Series-Bosch Carbon Dioxide Reduction. The RCA swing bed, VOR and HP EVA Glove tasks are directed at key technology needs for the Portable Life Support System (PLSS) and pressure garment for an Advanced Extravehicular Mobility Unit (EMU). Focus is on prototyping and integrated testing in cooperation with the Advanced Exploration Systems (AES) Advanced EVA Project. The HP EVA Glove Element, new this fiscal year, includes the generation of requirements and standards to guide development and evaluation of new glove designs. The AWP and Bosch efforts focus on regenerative technologies to further close spacecraft cabin atmosphere revitalization and water recovery loops and to meet technology maturation milestones defined in NASA's Space Technology Roadmaps. These activities are aimed at increasing affordability, reliability, and vehicle self-sufficiency while decreasing mass and mission cost, supporting a capability-driven architecture for extending human presence beyond low-Earth orbit, along a human path toward Mars. This paper provides a status of current technology development activities with a brief overview of future plans.

  9. Turbomachine Sealing and Secondary Flows - Part 3. Part 3; Review of Power-Stream Support, Unsteady Flow Systems, Seal and Disk Cavity Flows, Engine Externals, and Life and Reliability Issues

    Science.gov (United States)

    Hendricks, R. C.; Steinetz, B. M.; Zaretsky, E. V.; Athavale, M. M.; Przekwas, A. J.

    2004-01-01

    The issues and components supporting the engine power stream are reviewed. It is essential that companies pay close attention to engine sealing issues, particularly on the high-pressure spool or high-pressure pumps. Small changes in these systems are reflected throughout the entire engine. Although cavity, platform, and tip sealing are complex and have a significant effect on component and engine performance, computational tools (e.g., NASA-developed INDSEAL, SCISEAL, and ADPAC) are available to help guide the designer and the experimenter. Gas turbine engine and rocket engine externals must all function efficiently with a high degree of reliability in order for the engine to run but often receive little attention until they malfunction. Within the open literature statistically significant data for critical engine components are virtually nonexistent; the classic approach is deterministic. Studies show that variations with loading can have a significant effect on component performance and life. Without validation data they are just studies. These variations and deficits in statistical databases require immediate attention.

  10. [Basic life support in pediatrics].

    Science.gov (United States)

    Calvo Macías, A; Manrique Martínez, I; Rodríguez Núñez, A; López-Herce Cid, J

    2006-09-01

    Basic life support (BLS) is the combination of maneuvers that identifies the child in cardiopulmonary arrest and initiates the substitution of respiratory and circulatory function, without the use of technical adjuncts, until the child can receive more advanced treatment. BLS includes a sequence of steps or maneuvers that should be performed sequentially: ensuring the safety of rescuer and child, assessing unconsciousness, calling for help, positioning the victim, opening the airway, assessing breathing, ventilating, assessing signs of circulation and/or central arterial pulse, performing chest compressions, activating the emergency medical service system, and checking the results of resuscitation. The most important changes in the new guidelines are the compression: ventilation ratio and the algorithm for relieving foreign body airway obstruction. A compression/ ventilation ratio of 30:2 will be recommended for lay rescuers of infants, children and adults. Health professionals will use a compression: ventilation ratio of 15:2 for infants and children. If the health professional is alone, he/she may also use a ratio of 30:2 to avoid fatigue. In the algorithm for relieving foreign body airway obstruction, when the child becomes unconscious, the maneuvers will be similar to the BLS sequence with chest compressions (functioning as a deobstruction procedure) and ventilation, with reassessment of the mouth every 2 min to check for a foreign body, and evaluation of breathing and the presence of vital signs. BLS maneuvers are easy to learn and can be performed by anyone with adequate training. Therefore, BLS should be taught to all citizens.

  11. Bioregenerative life-support systems

    Science.gov (United States)

    Mitchell, C. A.

    1994-01-01

    Long-duration future habitation of space involving great distances from Earth and/or large crew sizes (eg, lunar outpost, Mars base) will require a controlled ecological life-support system (CELSS) to simultaneously revitalize atmosphere (liberate oxygen and fix carbon dioxide), purify water (via transpiration), and generate human food (for a vegetarian diet). Photosynthetic higher plants and algae will provide the essential functions of biomass productivity in a CELSS, and a combination of physicochemical and bioregenerative processes will be used to regenerate renewable resources from waste materials. Crop selection criteria for a CELSS include nutritional use characteristics as well as horticultural characteristics. Cereals, legumes, and oilseed crops are used to provide the major macronutrients for the CELSS diet. A National Aeronautics and Space Administration (NASA) Specialized Center of Research and Training (NSCORT) was established at Purdue University to establish proof of the concept of the sustainability of a CELSS. The Biosphere 2 project in Arizona is providing a model for predicted and unpredicted situations that arise as a result of closure in a complex natural ecosystem.

  12. Reliability Evaluation on Creep Life Prediction of Alloy 617 for a Very High Temperature Reactor

    International Nuclear Information System (INIS)

    Kim, Woo-Gon; Hong, Sung-Deok; Kim, Yong-Wan; Park, Jae-Young; Kim, Seon-Jin

    2012-01-01

    This paper evaluates the reliability of creep rupture life under service conditions of Alloy 617, which is considered as one of the candidate materials for use in a very high temperature reactor (VHTR) system. A Z-parameter, which represents the deviation of creep rupture data from the master curve, was used for the reliability analysis of the creep rupture data of Alloy 617. A Service-condition Creep Rupture Interference (SCRI) model, which can consider both the scattering of the creep rupture data and the fluctuations of temperature and stress under any service conditions, was also used for evaluating the reliability of creep rupture life. The statistical analysis showed that the scattering of creep rupture data based on Z-parameter was supported by normal distribution. The values of reliability decreased rapidly with increasing amplitudes of temperature and stress fluctuations. The results established that the reliability decreased with an increasing service time.

  13. Fast Monte Carlo reliability evaluation using support vector machine

    International Nuclear Information System (INIS)

    Rocco, Claudio M.; Moreno, Jose Ali

    2002-01-01

    This paper deals with the feasibility of using support vector machine (SVM) to build empirical models for use in reliability evaluation. The approach takes advantage of the speed of SVM in the numerous model calculations typically required to perform a Monte Carlo reliability evaluation. The main idea is to develop an estimation algorithm, by training a model on a restricted data set, and replace system performance evaluation by a simpler calculation, which provides reasonably accurate model outputs. The proposed approach is illustrated by several examples. Excellent system reliability results are obtained by training a SVM with a small amount of information

  14. Hospital Costs Of Extracorporeal Life Support Therapy

    NARCIS (Netherlands)

    Oude Lansink-Hartgring, Annemieke; van den Hengel, Berber; van der Bij, Wim; Erasmus, Michiel E.; Mariani, Massimo A.; Rienstra, Michiel; Cernak, Vladimir; Vermeulen, Karin M.; van den Bergh, Walter M.

    Objectives: To conduct an exploration of the hospital costs of extracorporeal life support therapy. Extracorporeal life support seems an efficient therapy for acute, potentially reversible cardiac or respiratory failure, when conventional therapy has been inadequate, or as bridge to transplant, but

  15. The Quality of Life Scale (QOLS: Reliability, Validity, and Utilization

    Directory of Open Access Journals (Sweden)

    Anderson Kathryn L

    2003-10-01

    Full Text Available Abstract The Quality of Life Scale (QOLS, created originally by American psychologist John Flanagan in the 1970's, has been adapted for use in chronic illness groups. This paper reviews the development and psychometric testing of the QOLS. A descriptive review of the published literature was undertaken and findings summarized in the frequently asked questions format. Reliability, content and construct validity testing has been performed on the QOLS and a number of translations have been made. The QOLS has low to moderate correlations with physical health status and disease measures. However, content validity analysis indicates that the instrument measures domains that diverse patient groups with chronic illness define as quality of life. The QOLS is a valid instrument for measuring quality of life across patient groups and cultures and is conceptually distinct from health status or other causal indicators of quality of life.

  16. Reliability and extended-life potential of EBR-II

    International Nuclear Information System (INIS)

    King, R.W.

    1985-01-01

    Although the longlife potential of liquid-metal-cooled reactors (LMRs) has been only partially demonstrated, many factors point to the potential for exceptionally long life. EBR-II has the opportunity to become the first LMR to achieve an operational lifetime of 30 years or more. In 1984 a study of the extended-life potential of EBR-II identified the factors that contribute to the continued successful operation of EBR-II as a power reactor and experimental facility. Also identified were factors that could cause disruptions in the useful life of the facility. Although no factors were found that would inherently limit the life of EBR-II, measures were identified that could help ensure continued plant availability. These measures include the implementation of more effective surveillance, diagnostic, and control systems to complement the inherent safety and reliability features of EBR-II. An operating lifetime of well beyond 30 years is certainly feasible

  17. Psychiatry: life events and social support in late life depression

    Directory of Open Access Journals (Sweden)

    Clóvis Alexandrino-Silva

    2011-01-01

    Full Text Available OBJECTIVES: To examine the association of life events and social support in the broadly defined category of depression in late life. INTRODUCTION: Negative life events and lack of social support are associated with depression in the elderly. Currently, there are limited studies examining the association between life events, social support and late-life depression in Brazil. METHODS: We estimated the frequency of late-life depression within a household community sample of 367 subjects aged 60 years or greater with associated factors. ''Old age symptomatic depression'' was defined using the Composite International Diagnostic Interview 1.1 tool. This diagnostic category included only late-life symptoms and consisted of the diagnoses of depression and dysthymia as well as a subsyndromal definition of depression, termed ''late subthreshold depression''. Social support and life events were assessed using the Comprehensive Assessment and Referral Evaluation (SHORT-CARE inventory. RESULTS: ''Old age symptomatic depression'' occurred in 18.8% of the patients in the tested sample. In univariate analyses, this condition was associated with female gender, lifetime anxiety disorder and living alone. In multivariate models, ''old age symptomatic depression'' was associated with a perceived lack of social support in men and life events in women. DISCUSSION: Social support and life events were determined to be associated with late-life depression, but it is important to keep in mind the differences between genders. Also, further exploration of the role of lifetime anxiety disorder in late-life depression may be of future importance. CONCLUSIONS: We believe that this study helps to provide insight into the role of psychosocial factors in late-life depression.

  18. Reliability and service life of wood structures and buildings

    Directory of Open Access Journals (Sweden)

    Zdeňka Havířová

    2005-01-01

    Full Text Available Service life of constructions and buildings of wood is dependent on temperature and moisture conditions in layers of the building cladding where the wood framework is built in. Temperature/moisture conditions or the corresponding equilibrium moisture content (EMC of the construction show considerable effects on the functional reliability of the whole building from the viewpoint of mechanical resistance and stability (ER1, energy savings and thermal protection (ER6 and hygiene, health and environment protection (ER3. To ensure the reliability of constructions and buildings for the period of their supposed service life a more profound analysis of constructions is necessary from the aspect of a global thermal/technical evaluation.

  19. Reliability and service life of wood structures and buildings

    OpenAIRE

    Zdeňka Havířová; Pavel Kubů

    2005-01-01

    Service life of constructions and buildings of wood is dependent on temperature and moisture conditions in layers of the building cladding where the wood framework is built in. Temperature/moisture conditions or the corresponding equilibrium moisture content (EMC) of the construction show considerable effects on the functional reliability of the whole building from the viewpoint of mechanical resistance and stability (ER1), energy savings and thermal protection (ER6) and hygiene, health and e...

  20. Reliability assessment of creep rupture life for Gr. 91 steel

    International Nuclear Information System (INIS)

    Kim, Woo-Gon; Park, Jae-Young; Kim, Seon-Jin; Jang, Jinsung

    2013-01-01

    Highlights: • Statistical analysis of a number of creep rupture data based on Z parameter. • Determination of the constant C in LM parameter and long-term creep life prediction. • Generation of random variables for Z s and Z cr by Monte-Carlo simulation in a SCRI model. • Examples for design application were reasonably drawn from the viewpoints of reliability. - Abstract: This paper presents reliability assessment of the long-term creep life of Gr. 91 steel, which is a major structural material for high temperature structural components of Generation-IV reactor systems. A number of creep rupture data for Gr. 91 steel were collected through literature surveys, and the long-term creep life was predicted by Larson–Miller parameter. A “Z parameter” method was used to describe the magnitude of the deviation of the creep rupture data to a master curve. A “Service Condition-creep Rupture property Interference (SCRI) model” based on the Z parameter was used to simultaneously consider the scattering of the creep rupture data of materials and the fluctuations of service conditions in reliability assessment. A statistical analysis of the creep rupture data was conducted by the Z parameter. To carry out the SCRI model, a number of random variables for Z s describing service conditions and Z cr describing the dispersion of the creep rupture data were generated using a Monte-Carlo simulation technique. As examples for application, the creep rupture life under a certain service conditions of Gr. 91 steel was reasonably drawn from the viewpoints of reliability

  1. User's manual of a support system for human reliability analysis

    International Nuclear Information System (INIS)

    Yokobayashi, Masao; Tamura, Kazuo.

    1995-10-01

    Many kinds of human reliability analysis (HRA) methods have been developed. However, users are required to be skillful so as to use them, and also required complicated works such as drawing event tree (ET) and calculation of uncertainty bounds. Moreover, each method is not so complete that only one method of them is not enough to evaluate human reliability. Therefore, a personal computer (PC) based support system for HRA has been developed to execute HRA practically and efficiently. The system consists of two methods, namely, simple method and detailed one. The former uses ASEP that is a simplified THERP-technique, and combined method of OAT and HRA-ET/DeBDA is used for the latter. Users can select a suitable method for their purpose. Human error probability (HEP) data were collected and a database of them was built to use for the support system. This paper describes outline of the HRA methods, support functions and user's guide of the system. (author)

  2. Need for Cost Optimization of Space Life Support Systems

    Science.gov (United States)

    Jones, Harry W.; Anderson, Grant

    2017-01-01

    As the nation plans manned missions that go far beyond Earth orbit to Mars, there is an urgent need for a robust, disciplined systems engineering methodology that can identify an optimized Environmental Control and Life Support (ECLSS) architecture for long duration deep space missions. But unlike the previously used Equivalent System Mass (ESM), the method must be inclusive of all driving parameters and emphasize the economic analysis of life support system design. The key parameter for this analysis is Life Cycle Cost (LCC). LCC takes into account the cost for development and qualification of the system, launch costs, operational costs, maintenance costs and all other relevant and associated costs. Additionally, an effective methodology must consider system technical performance, safety, reliability, maintainability, crew time, and other factors that could affect the overall merit of the life support system.

  3. Life Support Baseline Values and Assumptions Document

    Science.gov (United States)

    Anderson, Molly S.; Ewert, Michael K.; Keener, John F.

    2018-01-01

    The Baseline Values and Assumptions Document (BVAD) provides analysts, modelers, and other life support researchers with a common set of values and assumptions which can be used as a baseline in their studies. This baseline, in turn, provides a common point of origin from which many studies in the community may depart, making research results easier to compare and providing researchers with reasonable values to assume for areas outside their experience. This document identifies many specific physical quantities that define life support systems, serving as a general reference for spacecraft life support system technology developers.

  4. Human life support for advanced space exploration

    Science.gov (United States)

    Schwartzkopf, S. H.

    1997-01-01

    The requirements for a human life support system for long-duration space missions are reviewed. The system design of a controlled ecological life support system is briefly described, followed by a more detailed account of the study of the conceptual design of a Lunar Based CELSS. The latter is to provide a safe, reliable, recycling lunar base life support system based on a hybrid physicochemical/biological representative technology. The most important conclusion reached by this study is that implementation of a completely recycling CELSS approach for a lunar base is not only feasible, but eminently practical. On a cumulative launch mass basis, a 4-person Lunar Base CELSS would pay for itself in approximately 2.6 years relative to a physicochemical air/water recycling system with resupply of food from the Earth. For crew sizes of 30 and 100, the breakeven point would come even sooner, after 2.1 and 1.7 years, respectively, due to the increased mass savings that can be realized with the larger plant growth units. Two other conclusions are particularly important with regard to the orientation of future research and technology development. First, the mass estimates of the Lunar Base CELSS indicate that a primary design objective in implementing this kind of system must be to minimized the mass and power requirement of the food production plant growth units, which greatly surpass those of the other air and water recycling systems. Consequently, substantial research must be directed at identifying ways to produce food more efficiently. On the other hand, detailed studies to identify the best technology options for the other subsystems should not be expected to produce dramatic reductions in either mass or power requirement of a Lunar Base CELSS. The most crucial evaluation criterion must, therefore, be the capability for functional integration of these technologies into the ultimate design of the system. Secondly, this study illustrates that existing or near

  5. Reliability Centered Maintenance as a tool for plant life extension

    International Nuclear Information System (INIS)

    Elliott, J.O.; Mulay, J.N.; Nakahara, Y.

    1991-01-01

    Currently in the nuclear industry there is a growing interest in lowering the cost and complexity of maintenance activities while at the same time improving plant reliability and safety in an effort to prepare for the technical and regulatory challenges of life extension. This seemingly difficult task is being aided by the introduction of a maintenance philosophy developed originally by the airline industry and subsequently applied with great success both in that industry and the U.S. military services. Reliability Centered Maintenance (RCM), in its basic form, may be described as a consideration of reliability and maintenance problems from a systems level approach, allowing a focus on preservation of system function as the aim of a maintenance program optimized for both safety and economics. It is this systematic view of plant maintenance, with the emphasis on overall functions rather than individual parts and components which sets RCM apart from past nuclear plant maintenance philosophies. It is also the factor which makes application of RCM an ideal first step in development of strategies for life extension, both for aging plants, and for plants just beginning their first license term. (J.P.N.)

  6. Design Rules for Life Support Systems

    Science.gov (United States)

    Jones, Harry

    2002-01-01

    This paper considers some of the common assumptions and engineering rules of thumb used in life support system design. One general design rule is that the longer the mission, the more the life support system should use recycling and regenerable technologies. A more specific rule is that, if the system grows more than half the food, the food plants will supply all the oxygen needed for the crew life support. There are many such design rules that help in planning the analysis of life support systems and in checking results. These rules are typically if-then statements describing the results of steady-state, "back of the envelope," mass flow calculations. They are useful in identifying plausible candidate life support system designs and in rough allocations between resupply and resource recovery. Life support system designers should always review the design rules and make quick steady state calculations before doing detailed design and dynamic simulation. This paper develops the basis for the different assumptions and design rules and discusses how they should be used. We start top-down, with the highest level requirement to sustain human beings in a closed environment off Earth. We consider the crew needs for air, water, and food. We then discuss atmosphere leakage and recycling losses. The needs to support the crew and to make up losses define the fundamental life support system requirements. We consider the trade-offs between resupplying and recycling oxygen, water, and food. The specific choices between resupply and recycling are determined by mission duration, presence of in-situ resources, etc., and are defining parameters of life support system design.

  7. Life Support Systems: Oxygen Generation and Recovery

    Data.gov (United States)

    National Aeronautics and Space Administration — The Advanced Exploration Systems (AES) Life Support Systems project Oxygen Generation and Recovery technology development area encompasses several sub-tasks in an...

  8. Hybrid Life Support System Technology Demonstrations

    Science.gov (United States)

    Morrow, R. C.; Wetzel, J. P.; Richter, R. C.

    2018-02-01

    Demonstration of plant-based hybrid life support technologies in deep space will validate the function of these technologies for long duration missions, such as Mars transit, while providing dietary variety to improve habitability.

  9. An information system supporting design for reliability and maintenance

    Energy Technology Data Exchange (ETDEWEB)

    Rit, J.F.; Beraud, M.T

    1997-12-31

    EDF is currently developing a methodology to integrate availability, operating experience and maintenance in the design of power plants. This involves studies that depend closely on the results and assumptions of each other about the reliability and operations of the plant. Therefore a support information system must be carefully designed. Concurrently with development of the methodology, a research oriented information system was designed and built. It is based on the database model of a logistic support repository that we tailored to our needs. (K.A.) 10 refs.

  10. An information system supporting design for reliability and maintenance

    International Nuclear Information System (INIS)

    Rit, J.F.; Beraud, M.T.

    1997-01-01

    EDF is currently developing a methodology to integrate availability, operating experience and maintenance in the design of power plants. This involves studies that depend closely on the results and assumptions of each other about the reliability and operations of the plant. Therefore a support information system must be carefully designed. Concurrently with development of the methodology, a research oriented information system was designed and built. It is based on the database model of a logistic support repository that we tailored to our needs. (K.A.)

  11. Mathematical Modeling Of Life-Support Systems

    Science.gov (United States)

    Seshan, Panchalam K.; Ganapathi, Balasubramanian; Jan, Darrell L.; Ferrall, Joseph F.; Rohatgi, Naresh K.

    1994-01-01

    Generic hierarchical model of life-support system developed to facilitate comparisons of options in design of system. Model represents combinations of interdependent subsystems supporting microbes, plants, fish, and land animals (including humans). Generic model enables rapid configuration of variety of specific life support component models for tradeoff studies culminating in single system design. Enables rapid evaluation of effects of substituting alternate technologies and even entire groups of technologies and subsystems. Used to synthesize and analyze life-support systems ranging from relatively simple, nonregenerative units like aquariums to complex closed-loop systems aboard submarines or spacecraft. Model, called Generic Modular Flow Schematic (GMFS), coded in such chemical-process-simulation languages as Aspen Plus and expressed as three-dimensional spreadsheet.

  12. IT for advanced Life Support in English

    DEFF Research Database (Denmark)

    Sejerø Pedersen, Birgitte; Jeberg, Kirsten Ann; Koerner, Christian

    2009-01-01

    In this study we analyzed how IT support can be established for the treatment and documentation of advanced life support (ALS) in a hospital. In close collaboration with clinical researchers, a running prototype of an IT solution to support the clinical decisions in ALS was developed and tried out...... in a full scale simulation environment. We have named this IT solution the CardioData Prototype....

  13. Application of structural reliability and risk assessment to life prediction and life extension decision making

    International Nuclear Information System (INIS)

    Meyer, T.A.; Balkey, K.R.; Bishop, B.A.

    1987-01-01

    There can be numerous uncertainties involved in performing component life assessments. In addition, sufficient data may be unavailable to make a useful life prediction. Structural Reliability and Risk Assessment (SRRA) is primarily an analytical methodology or tool that quantifies the impact of uncertainties on the structural life of plant components and can address the lack of data in component life prediction. As a prelude to discussing the technical aspects of SRRA, a brief review of general component life prediction methods is first made so as to better develop an understanding of the role of SRRA in such evaluations. SRRA is then presented as it is applied in component life evaluations with example applications being discussed for both nuclear and non-nuclear components

  14. Don't Trust a Management Metric, Especially in Life Support

    Science.gov (United States)

    Jones, Harry W.

    2014-01-01

    Goodhart's law states that metrics do not work. Metrics become distorted when used and they deflect effort away from more important goals. These well-known and unavoidable problems occurred when the closure and system mass metrics were used to manage life support research. The intent of life support research should be to develop flyable, operable, reliable systems, not merely to increase life support system closure or to reduce its total mass. It would be better to design life support systems to meet the anticipated mission requirements and user needs. Substituting the metrics of closure and total mass for these goals seems to have led life support research to solve the wrong problems.

  15. Reliability of decision-support systems for nuclear emergency management

    Energy Technology Data Exchange (ETDEWEB)

    Ionescu, Tudor B.

    2013-08-15

    Decision support systems for nuclear emergency management (DSNE) are currently used worldwide to assist decision makers in taking emergency response countermeasures in case of accidental releases of radioactive materials from nuclear facilities. The present work has been motivated by the fact that, up until now, DSNE systems have not been regarded as safetycritical software systems, such as embedded software currently being used in vehicles and aircraft. The core of any DSNE system is represented by the different simulation codes linked together to form the dispersion simulation workflow. These codes require input emission and meteorological data to produce forecasts of the atmospheric dispersion of radioactive pollutants and other substances. However, the reliability of the system not only depends on the trustworthiness of the measured (or generated) input data but also on the reliability of the simulation codes used. The main goal of this work is to improve the reliability of DSNE systems by adapting current state of the art methods from the domain of software reliability engineering to the case of atmospheric dispersion simulation codes. The current approach is based on the design by diversity principle for improving the reliability of codes and the trustworthiness of results as well as on a flexible fault-tolerant workflow scheduling algorithm for ensuring the maximum availability of the system. The author's contribution is represented by (i) an acceptance test for dispersion simulation results, (ii) an adjudication algorithm (voter) based on comparing taxonomies of dispersion simulation results, and (iii) a feedback-control based fault-tolerant workflow scheduling algorithm. These tools provide means for the continuous verification of dispersion simulation codes while tolerating timing faults caused by disturbances in the underlying computational environment and will thus help increase the reliability and trustworthiness of DSNE systems in missioncritical

  16. Reliability of decision-support systems for nuclear emergency management

    International Nuclear Information System (INIS)

    Ionescu, Tudor B.

    2013-08-01

    Decision support systems for nuclear emergency management (DSNE) are currently used worldwide to assist decision makers in taking emergency response countermeasures in case of accidental releases of radioactive materials from nuclear facilities. The present work has been motivated by the fact that, up until now, DSNE systems have not been regarded as safetycritical software systems, such as embedded software currently being used in vehicles and aircraft. The core of any DSNE system is represented by the different simulation codes linked together to form the dispersion simulation workflow. These codes require input emission and meteorological data to produce forecasts of the atmospheric dispersion of radioactive pollutants and other substances. However, the reliability of the system not only depends on the trustworthiness of the measured (or generated) input data but also on the reliability of the simulation codes used. The main goal of this work is to improve the reliability of DSNE systems by adapting current state of the art methods from the domain of software reliability engineering to the case of atmospheric dispersion simulation codes. The current approach is based on the design by diversity principle for improving the reliability of codes and the trustworthiness of results as well as on a flexible fault-tolerant workflow scheduling algorithm for ensuring the maximum availability of the system. The author's contribution is represented by (i) an acceptance test for dispersion simulation results, (ii) an adjudication algorithm (voter) based on comparing taxonomies of dispersion simulation results, and (iii) a feedback-control based fault-tolerant workflow scheduling algorithm. These tools provide means for the continuous verification of dispersion simulation codes while tolerating timing faults caused by disturbances in the underlying computational environment and will thus help increase the reliability and trustworthiness of DSNE systems in missioncritical

  17. Learning to Control Advanced Life Support Systems

    Science.gov (United States)

    Subramanian, Devika

    2004-01-01

    Advanced life support systems have many interacting processes and limited resources. Controlling and optimizing advanced life support systems presents unique challenges. In particular, advanced life support systems are nonlinear coupled dynamical systems and it is difficult for humans to take all interactions into account to design an effective control strategy. In this project. we developed several reinforcement learning controllers that actively explore the space of possible control strategies, guided by rewards from a user specified long term objective function. We evaluated these controllers using a discrete event simulation of an advanced life support system. This simulation, called BioSim, designed by Nasa scientists David Kortenkamp and Scott Bell has multiple, interacting life support modules including crew, food production, air revitalization, water recovery, solid waste incineration and power. They are implemented in a consumer/producer relationship in which certain modules produce resources that are consumed by other modules. Stores hold resources between modules. Control of this simulation is via adjusting flows of resources between modules and into/out of stores. We developed adaptive algorithms that control the flow of resources in BioSim. Our learning algorithms discovered several ingenious strategies for maximizing mission length by controlling the air and water recycling systems as well as crop planting schedules. By exploiting non-linearities in the overall system dynamics, the learned controllers easily out- performed controllers written by human experts. In sum, we accomplished three goals. We (1) developed foundations for learning models of coupled dynamical systems by active exploration of the state space, (2) developed and tested algorithms that learn to efficiently control air and water recycling processes as well as crop scheduling in Biosim, and (3) developed an understanding of the role machine learning in designing control systems for

  18. Monitoring and life-support devices

    International Nuclear Information System (INIS)

    Noback, C.R.; Murphy, C.H.

    1987-01-01

    The radiographic and physical principles involved in interpreting films, and some of the altered anatomy and pathology that may be seen on such films, are discussed. This chapter considers the radiographic appearances of monitoring and life-support devices. Appropriate positioning and function are shown, as are some of the complications associated with their placement and/or function

  19. Next Generation Life Support Project Status

    Science.gov (United States)

    Barta, Daniel J.; Chullen, Cinda; Pickering, Karen D.; Cox, Marlon; Towsend, Neil; Campbell, Colin; Flynn, Michael; Wheeler, Raymond

    2012-01-01

    Next Generation Life Support (NGLS) is one of several technology development projects sponsored by NASA s Game Changing Development Program. The NGLS Project is developing life support technologies (including water recovery and space suit life support technologies) needed for humans to live and work productively in space. NGLS has three project tasks: Variable Oxygen Regulator (VOR), Rapid Cycle Amine (RCA) swing bed, and Alternative Water Processor (AWP). The RCA swing bed and VOR tasks are directed at key technology needs for the Portable Life Support System (PLSS) for an Advanced Extravehicular Mobility Unit, with focus on test article development and integrated testing in an Advanced PLSS in cooperation with the Advanced Extra Vehicular Activity (EVA) Project. An RCA swing-bed provides integrated carbon dioxide removal and humidity control that can be regenerated in real time during an EVA. The VOR technology will significantly increase the number of pressure settings available to the space suit. Current space suit pressure regulators are limited to only two settings whereas the adjustability of the advanced regulator will be nearly continuous. The AWP effort, based on natural biological processes and membrane-based secondary treatment, will result in the development of a system capable of recycling wastewater from sources expected in future exploration missions, including hygiene and laundry water. This paper will provide a status of technology development activities and future plans.

  20. Life Support Systems: Wastewater Processing and Water Management

    Data.gov (United States)

    National Aeronautics and Space Administration — Advanced Exploration Systems (AES) Life Support Systems project Wastewater Processing and Water Management task: Within an integrated life support system, water...

  1. Cyrogenic Life Support Technology Development Project

    Science.gov (United States)

    Bush, David R.

    2015-01-01

    KSC has used cryogenic life support (liquid air based) technology successfully for many years to support spaceflight operations. This technology has many benefits unique to cryogenics when compared to traditional compressed gas systems: passive cooling, lighter, longer duration, and lower operating pressure. However, there are also several limiting factors that have prevented the technology from being commercialized. The National Institute of Occupational Safety and Health, Office of Mine Safety and Health Research (NIOSH-OMSHR) has partnered with NASA to develop a complete liquid air based life support solution for emergency mine escape and rescue. The project will develop and demonstrate various prototype devices and incorporate new technological innovations that have to date prevented commercialization.

  2. Altair Lander Life Support: Design Analysis Cycles 4 and 5

    Science.gov (United States)

    Anderson, Molly; Curley, Su; Rotter, Henry; Stambaugh, Imelda; Yagoda, Evan

    2011-01-01

    Life support systems are a critical part of human exploration beyond low earth orbit. NASA s Altair Lunar Lander team is pursuing efficient solutions to the technical challenges of human spaceflight. Life support design efforts up through Design Analysis Cycle (DAC) 4 focused on finding lightweight and reliable solutions for the Sortie and Outpost missions within the Constellation Program. In DAC-4 and later follow on work, changes were made to add functionality for new requirements accepted by the Altair project, and to update the design as knowledge about certain issues or hardware matured. In DAC-5, the Altair project began to consider mission architectures outside the Constellation baseline. Selecting the optimal life support system design is very sensitive to mission duration. When the mission goals and architecture change several trade studies must be conducted to determine the appropriate design. Finally, several areas of work developed through the Altair project may be applicable to other vehicle concepts for microgravity missions. Maturing the Altair life support system related analysis, design, and requirements can provide important information for developers of a wide range of other human vehicles.

  3. Rapid Deterioration of Basic Life Support Skills in Dentists With Basic Life Support Healthcare Provider.

    Science.gov (United States)

    Nogami, Kentaro; Taniguchi, Shogo; Ichiyama, Tomoko

    2016-01-01

    The aim of this study was to investigate the correlation between basic life support skills in dentists who had completed the American Heart Association's Basic Life Support (BLS) Healthcare Provider qualification and time since course completion. Thirty-six dentists who had completed the 2005 BLS Healthcare Provider course participated in the study. We asked participants to perform 2 cycles of cardiopulmonary resuscitation on a mannequin and evaluated basic life support skills. Dentists who had previously completed the BLS Healthcare Provider course displayed both prolonged reaction times, and the quality of their basic life support skills deteriorated rapidly. There were no correlations between basic life support skills and time since course completion. Our results suggest that basic life support skills deteriorate rapidly for dentists who have completed the BLS Healthcare Provider. Newer guidelines stressing chest compressions over ventilation may help improve performance over time, allowing better cardiopulmonary resuscitation in dental office emergencies. Moreover, it may be effective to provide a more specialized version of the life support course to train the dentists, stressing issues that may be more likely to occur in the dental office.

  4. Life prediction and mechanical reliability of NT551 silicon nitride

    Science.gov (United States)

    Andrews, Mark Jay

    551. For the same reasons, the predicted and actual fatigue performance did not correlate well. The results of this study should not be considered a limitation of the life prediction algorithm but emphasize the requirement that ceramics be homogeneous and strength-limiting flaws uniformly distributed as a perquisite for accurate life prediction and reliability analyses.

  5. Exploration Life Support Technology Development for Lunar Missions

    Science.gov (United States)

    Ewert, Michael K.; Barta, Daniel J.; McQuillan, Jeffrey

    2009-01-01

    Exploration Life Support (ELS) is one of NASA's Exploration Technology Development Projects. ELS plans, coordinates and implements the development of new life support technologies for human exploration missions as outlined in NASA's Vision for Space Exploration. ELS technology development currently supports three major projects of the Constellation Program - the Orion Crew Exploration Vehicle (CEV), the Altair Lunar Lander and Lunar Surface Systems. ELS content includes Air Revitalization Systems (ARS), Water Recovery Systems (WRS), Waste Management Systems (WMS), Habitation Engineering, Systems Integration, Modeling and Analysis (SIMA), and Validation and Testing. The primary goal of the ELS project is to provide different technology options to Constellation which fill gaps or provide substantial improvements over the state-of-the-art in life support systems. Since the Constellation missions are so challenging, mass, power, and volume must be reduced from Space Shuttle and Space Station technologies. Systems engineering analysis also optimizes the overall architecture by considering all interfaces with the life support system and potential for reduction or reuse of resources. For long duration missions, technologies which aid in closure of air and water loops with increased reliability are essential as well as techniques to minimize or deal with waste. The ELS project utilizes in-house efforts at five NASA centers, aerospace industry contracts, Small Business Innovative Research contracts and other means to develop advanced life support technologies. Testing, analysis and reduced gravity flight experiments are also conducted at the NASA field centers. This paper gives a current status of technologies under development by ELS and relates them to the Constellation customers who will eventually use them.

  6. Emergency Neurological Life Support: Intracerebral Hemorrhage.

    Science.gov (United States)

    Jauch, Edward C; Pineda, Jose A; Hemphill, J Claude

    2015-12-01

    Intracerebral hemorrhage (ICH) is a subset of stroke due to bleeding within the parenchyma of the brain. It is potentially lethal, and survival depends on ensuring an adequate airway, reversal of coagulopathy, and proper diagnosis. ICH was chosen as an Emergency Neurological Life Support protocol because intervention within the first critical hour may improve outcome, and it is critical to have site-specific protocols to drive care quickly and efficiently.

  7. Applications of majorization and Schur functions in reliability and life testing

    International Nuclear Information System (INIS)

    Proschan, F.

    1975-01-01

    This is an expository paper presenting basic definitions and properties of majorization and Schur functions, and displaying a variety of applications of these concepts in reliability prediction and modelling, and in reliability inference and life testing

  8. Space Life-Support Engineering Program

    Science.gov (United States)

    Seagrave, Richard C. (Principal Investigator)

    1995-01-01

    This report covers the seventeen months of work performed under an extended one year NASA University Grant awarded to Iowa State University to perform research on topics relating to the development of closed-loop long-term life support systems with the initial principal focus on space water management. In the first phase of the program, investigators from chemistry and chemical engineering with demonstrated expertise in systems analysis, thermodynamics, analytical chemistry and instrumentation, performed research and development in two major related areas; the development of low-cost, accurate, and durable sensors for trace chemical and biological species, and the development of unsteady-state simulation packages for use in the development and optimization of control systems for life support systems. In the second year of the program, emphasis was redirected towards concentrating on the development of dynamic simulation techniques and software and on performing a thermodynamic systems analysis, centered on availability or energy analysis, in an effort to begin optimizing the systems needed for water purification. The third year of the program, the subject of this report, was devoted to the analysis of the water balance for the interaction between humans and the life support system during space flight and exercise, to analysis of the cardiopulmonary systems of humans during space flight, and to analysis of entropy production during operation of the air recovery system during space flight.

  9. TURKISH VERSION QUALITY OF LIFE IN ESSENTIAL TREMOR QUESTIONNAIRE (QUEST): VALIDITY AND RELIABILITY STUDY.

    Science.gov (United States)

    Güler, Sibel; Turan, F Nesrin

    2015-09-30

    Our aim was to translate the Quality of Life in Essential Tremor Questionnaire (QUEST) advanced by Troster (2005) and to analyse the validity and reliability of this questionnaire. Two hundred twelve consecutive patients with essential tremor (ET) and forty-three control subjects were included in the study. Permission for the translation and validation of the QUEST scale was obtained. The translation was performed according to the guidelines provided by the publisher. After the translation, the final version of the scale was administered to both groups to determine its reliability and validity. The QUEST Physical, Psychosocial, communication, Hobbies/leisure and Work/finance scores were 0.967, 0.968, 0.933, 0.964 and 0.925, respectively. There were good correlations between each of the QUEST scores that were indicative of good internal consistency. Additionally, we observed that all of the QUEST scores were most strongly related to the right and left arms (p=0.0001). However, we observed that all of the QUEST scores were weakly related to the voice, head and right leg (p=0.0001). These findings support the notion that the Turkish version of the Quality of Life in Essential Tremor (QUEST) questionnaire is a valid and reliable tool for the assessment of the quality of life of patients with ET.

  10. Life Cycle Assessment for desalination: a review on methodology feasibility and reliability.

    Science.gov (United States)

    Zhou, Jin; Chang, Victor W-C; Fane, Anthony G

    2014-09-15

    As concerns of natural resource depletion and environmental degradation caused by desalination increase, research studies of the environmental sustainability of desalination are growing in importance. Life Cycle Assessment (LCA) is an ISO standardized method and is widely applied to evaluate the environmental performance of desalination. This study reviews more than 30 desalination LCA studies since 2000s and identifies two major issues in need of improvement. The first is feasibility, covering three elements that support the implementation of the LCA to desalination, including accounting methods, supporting databases, and life cycle impact assessment approaches. The second is reliability, addressing three essential aspects that drive uncertainty in results, including the incompleteness of the system boundary, the unrepresentativeness of the database, and the omission of uncertainty analysis. This work can serve as a preliminary LCA reference for desalination specialists, but will also strengthen LCA as an effective method to evaluate the environment footprint of desalination alternatives. Copyright © 2014 Elsevier Ltd. All rights reserved.

  11. Pediatric advanced life support and sedation of pediatric dental patients

    OpenAIRE

    Kim, Jongbin

    2016-01-01

    Programs provided by the Korea Association of Cardiopulmonary Resuscitation include Basic Life Support (BLS), Advanced Cardiac Life Support (ACLS), Pediatric Advanced Life Support (PALS), and Korean Advanced Life Support (KALS). However, programs pertinent to dental care are lacking. Since 2015, related organizations have been attempting to develop a Dental Advanced Life Support (DALS) program, which can meet the needs of the dental environment. Generally, for initial management of emergency ...

  12. Incremental support vector machines for fast reliable image recognition

    International Nuclear Information System (INIS)

    Makili, L.; Vega, J.; Dormido-Canto, S.

    2013-01-01

    Highlights: ► A conformal predictor using SVM as the underlying algorithm was implemented. ► It was applied to image recognition in the TJ–II's Thomson Scattering Diagnostic. ► To improve time efficiency an approach to incremental SVM training has been used. ► Accuracy is similar to the one reached when standard SVM is used. ► Computational time saving is significant for large training sets. -- Abstract: This paper addresses the reliable classification of images in a 5-class problem. To this end, an automatic recognition system, based on conformal predictors and using Support Vector Machines (SVM) as the underlying algorithm has been developed and applied to the recognition of images in the Thomson Scattering Diagnostic of the TJ–II fusion device. Using such conformal predictor based classifier is a computationally intensive task since it implies to train several SVM models to classify a single example and to perform this training from scratch takes a significant amount of time. In order to improve the classification time efficiency, an approach to the incremental training of SVM has been used as the underlying algorithm. Experimental results show that the overall performance of the new classifier is high, comparable to the one corresponding to the use of standard SVM as the underlying algorithm and there is a significant improvement in time efficiency

  13. Incremental support vector machines for fast reliable image recognition

    Energy Technology Data Exchange (ETDEWEB)

    Makili, L., E-mail: makili_le@yahoo.com [Instituto Superior Politécnico da Universidade Katyavala Bwila, Benguela (Angola); Vega, J. [Asociación EURATOM/CIEMAT para Fusión, Madrid (Spain); Dormido-Canto, S. [Dpto. Informática y Automática – UNED, Madrid (Spain)

    2013-10-15

    Highlights: ► A conformal predictor using SVM as the underlying algorithm was implemented. ► It was applied to image recognition in the TJ–II's Thomson Scattering Diagnostic. ► To improve time efficiency an approach to incremental SVM training has been used. ► Accuracy is similar to the one reached when standard SVM is used. ► Computational time saving is significant for large training sets. -- Abstract: This paper addresses the reliable classification of images in a 5-class problem. To this end, an automatic recognition system, based on conformal predictors and using Support Vector Machines (SVM) as the underlying algorithm has been developed and applied to the recognition of images in the Thomson Scattering Diagnostic of the TJ–II fusion device. Using such conformal predictor based classifier is a computationally intensive task since it implies to train several SVM models to classify a single example and to perform this training from scratch takes a significant amount of time. In order to improve the classification time efficiency, an approach to the incremental training of SVM has been used as the underlying algorithm. Experimental results show that the overall performance of the new classifier is high, comparable to the one corresponding to the use of standard SVM as the underlying algorithm and there is a significant improvement in time efficiency.

  14. Termination of life support after major trauma.

    Science.gov (United States)

    Sullivan, D J; Hansen-Flaschen, J

    2000-06-01

    As the population continues to age, greater numbers and more severely injured elderly patients require care in ICUs. With the attendant increase in the medical complexity of such patients, investigators anticipate that trauma and critical care resources will become increasingly stretched. Because of economic and societal forces, it will become increasingly important for trauma surgeons to appropriately counsel patients and their families regarding the outcome from their injuries and to become comfortable approaching families about withdrawal of support when medical futility is recognized. The authors propose the following guidelines for discussing limitation or termination of life support with patients and their families. Physicians should (1) discuss the patient's wishes regarding life support on admission or early in the hospital course; (2) at the initial discussion, establish who the decision maker will be if the patient is or becomes incapacitated; (3) maintain regular communication and continuity of care; and (4) inevitably, when conflict occurs, involve consultants and a hospital ethics committee for assistance in its resolution.

  15. Steam generator life-management, reliability, maintenance and refurbishment

    International Nuclear Information System (INIS)

    Spekkens, P.

    2012-01-01

    SGC 2012 is a different kind of a conference - it has its own focus, initiatives and objectives and differs from its predecessors. It originated as the Steam Generator and Heat Exchanger Conference in 1990 - a time when premature degradation of steam generators with Alloy 600 tubes was rampant world-wide, and some CANDU steam generators had started to experience significant fouling and corrosion issues. The six previous steam generator conferences were held on a regular cycle, in a very similar format and with a similar theme. We are now in a different era in steam generators. The Alloy 600 tubing has been largely replaced by more robust materials, and the CANDU steam generators have been brought under much more intense and effective life cycle management. Performance of steam generators has improved greatly, and they are no longer considered at risk of limiting the life of the units. Indeed, most Incoloy 800 steam generators in CANDU units are considered to be capable of operating reliably through the 'second life' of the units and are not being replaced during refurbishments. Given this changing environment, the scope of this conference has been expanded from one to three areas: steam generators and heat exchangers as before, but also; controls, valves and pumps, and; reactor components and systems, Programs A, B and C, respectively. The conference is targeting to address the needs and interests of the operating utilities, and to 'focus on what needs attention'. As a means of 'focusing on what needs attention' an 'Issue-Identification and Definition' program was initiated last winter. The Issue-Identification Team operating with COG President Bob Morrison as its Executive Lead, worked to identify issues requiring attention in the three areas of interest. Of the many issues identified by the Team and elaborated on by the Program Developers of this conference, four were recommended for special attention: A. 'Operate Clean - Build Clean - Plant Wide': Despite their

  16. NASA's Interests in Bioregenerative Life Support

    Science.gov (United States)

    Wheeler, Raymond M.

    2018-01-01

    NASA and other space agencies and around the world have had long-standing interest in using plants and biological approaches for regenerative life support. In particular, NASA's Kennedy Space Center, has conducted research in this area for over 30 years. One unique aspect to this testing was NASA's Biomass Production Chamber, which had four vertically stacked growing shelves inside a large, 113 cubic meter chamber. This was perhaps one of the first working examples of a vertical agriculture system in the world. A review of some of this research along with some of the more salient findings will be presented.

  17. Reliability-based Assessment of Fatigue Life for Bridges

    DEFF Research Database (Denmark)

    Toft, Henrik Stensgaard; Sørensen, John Dalsgaard

    2012-01-01

    The reliability level for bridges is discussed based on a comparison of the reliability levels proposed and used by e.g. JCSS, ISO, NKB and Eurocodes. The influence of reserve capacity by which failure of a specific detail does not lead to structural collapse is investigated. The results show...

  18. Establishing monitoring programs for travel time reliability. [supporting datasets

    Science.gov (United States)

    2014-01-01

    The objective of this project was to develop system designs for programs to monitor travel time reliability and to prepare a guidebook that practitioners and others can use to design, build, operate, and maintain such systems. Generally, such travel ...

  19. Four-train support always more reliable than a two-train support?

    International Nuclear Information System (INIS)

    Guey, C.N.; Arrieta, L.; Youngblood, R.

    1986-01-01

    Once the gross features of a frontline fluid system have been defined, one must consider what support system configuration will provide the best overall system performance. This paper considers different direct-current (dc) bus configurations for a given emergency feedwater system (EFWS). Results indicate that a four-train support system (i.e., 4 dc buses) gives a lower system unavailability for transients, but a higher system unavailability for anticipated transients without scram (ATWSs), than a two-train support system (i.e., two dc buses). This serves to illustrate that more trains do not necessarily provide higher reliability, and that a configuration choice which is better for one emission success criterion may be worse for another. Because of the small characteristic unreliability of dc buses, the numerical comparisons made here are not dramatic, but the underlying topological point is nevertheless broadly applicable

  20. Confronting Uncertainty in Life Cycle Assessment Used for Decision Support

    DEFF Research Database (Denmark)

    Herrmann, Ivan Tengbjerg; Hauschild, Michael Zwicky; Sohn, Michael D.

    2014-01-01

    the decision maker (DM) in making the best possible choice for the environment. At present, some DMs do not trust the LCA to be a reliable decisionsupport tool—often because DMs consider the uncertainty of an LCA to be too large. The standard evaluation of uncertainty in LCAs is an ex-post approach that can...... regarding which type of LCA study to employ for the decision context at hand. This taxonomy enables the derivation of an LCA classification matrix to clearly identify and communicate the type of a given LCA. By relating the LCA classification matrix to statistical principles, we can also rank the different......The aim of this article is to help confront uncertainty in life cycle assessments (LCAs) used for decision support. LCAs offer a quantitative approach to assess environmental effects of products, technologies, and services and are conducted by an LCA practitioner or analyst (AN) to support...

  1. NASA Advanced Explorations Systems: Advancements in Life Support Systems

    Science.gov (United States)

    Shull, Sarah A.; Schneider, Walter F.

    2016-01-01

    The NASA Advanced Exploration Systems (AES) Life Support Systems (LSS) project strives to develop reliable, energy-efficient, and low-mass spacecraft systems to provide environmental control and life support systems (ECLSS) critical to enabling long duration human missions beyond low Earth orbit (LEO). Highly reliable, closed-loop life support systems are among the capabilities required for the longer duration human space exploration missions assessed by NASA's Habitability Architecture Team (HAT). The LSS project is focused on four areas: architecture and systems engineering for life support systems, environmental monitoring, air revitalization, and wastewater processing and water management. Starting with the international space station (ISS) LSS systems as a point of departure (where applicable), the mission of the LSS project is three-fold: 1. Address discrete LSS technology gaps 2. Improve the reliability of LSS systems 3. Advance LSS systems towards integrated testing on the ISS. This paper summarized the work being done in the four areas listed above to meet these objectives. Details will be given on the following focus areas: Systems Engineering and Architecture- With so many complex systems comprising life support in space, it is important to understand the overall system requirements to define life support system architectures for different space mission classes, ensure that all the components integrate well together and verify that testing is as representative of destination environments as possible. Environmental Monitoring- In an enclosed spacecraft that is constantly operating complex machinery for its own basic functionality as well as science experiments and technology demonstrations, it's possible for the environment to become compromised. While current environmental monitors aboard the ISS will alert crew members and mission control if there is an emergency, long-duration environmental monitoring cannot be done in-orbit as current methodologies

  2. The Brief Multidimensional Students' Life Satisfaction Scale (BMSLSS): Reliability, validity, and gender invariance in an Indian adolescent sample.

    Science.gov (United States)

    Hashim, Jayana; Areepattamannil, Shaljan

    2017-06-01

    This study examined the internal consistency reliability, factorial, convergent, discriminant, and predictive validity, as well as gender invariance of the Brief Multidimensional Students' Life Satisfaction Scale (BMSLSS; Seligson, Huebner, & Valois, 2003) in a sample of 445 adolescents (M age  = 16.04 years) hailing from the southernmost state of India, Kerala. The study also examined the test-retest reliability (n = 392) of the BMSLSS. The Cronbach's alpha coefficient suggested that the BMSLSS was reliable. Confirmatory factor analyses demonstrated the factorial validity of the BMSLSS. Bivariate correlational analyses provided support for the convergent, discriminant, and predictive validity of the BMSLSS. The test-retest reliability coefficient indicated the temporal stability of the BMSLSS. Finally, multi-group confirmatory factor analysis provided support for the gender invariance of the BMSLSS. Copyright © 2017 The Foundation for Professionals in Services for Adolescents. Published by Elsevier Ltd. All rights reserved.

  3. Life cycle reliability assessment of new products—A Bayesian model updating approach

    International Nuclear Information System (INIS)

    Peng, Weiwen; Huang, Hong-Zhong; Li, Yanfeng; Zuo, Ming J.; Xie, Min

    2013-01-01

    The rapidly increasing pace and continuously evolving reliability requirements of new products have made life cycle reliability assessment of new products an imperative yet difficult work. While much work has been done to separately estimate reliability of new products in specific stages, a gap exists in carrying out life cycle reliability assessment throughout all life cycle stages. We present a Bayesian model updating approach (BMUA) for life cycle reliability assessment of new products. Novel features of this approach are the development of Bayesian information toolkits by separately including “reliability improvement factor” and “information fusion factor”, which allow the integration of subjective information in a specific life cycle stage and the transition of integrated information between adjacent life cycle stages. They lead to the unique characteristics of the BMUA in which information generated throughout life cycle stages are integrated coherently. To illustrate the approach, an application to the life cycle reliability assessment of a newly developed Gantry Machining Center is shown

  4. Extracorporeal life support in pediatric cardiac patients

    Directory of Open Access Journals (Sweden)

    Matteo Di NARDO

    2016-10-01

    Full Text Available Extracorporeal Life Support (ECLS is a valuable tool in the management of neonates and older children with severe cardiac or respiratory failure. In this review, we focus on ECLS when used for neonatal and pediatric cardiac disease. Strict selection of patients and timely deployment are necessary to optimize outcomes. Although every attempt should be made to deploy ECLS urgently rather than emergently, extracorporeal cardiopulmonary resuscitation (ECPR is being increasingly used and reasonable survival rates have been achieved after initiation of ECLS during active compressions of the chest following in-hospital cardiac arrest. Contraindications to ECLS are falling over time, although lethal chromosomal abnormalities, severe irreversible brain injury, and extremely low gestational age and weight (<32 weeks gestation or <1.5 kg remain firm contraindications.

  5. Life support approaches for Mars missions

    Science.gov (United States)

    Drysdale, A. E.; Ewert, M. K.; Hanford, A. J.

    Life support approaches for Mars missions are evaluated using an equivalent system mass (ESM) approach, in which all significant costs are converted into mass units. The best approach, as defined by the lowest mission ESM, depends on several mission parameters, notably duration, environment and consequent infrastructure costs, and crew size, as well as the characteristics of the technologies which are available. Generally, for the missions under consideration, physicochemical regeneration is most cost effective. However, bioregeneration is likely to be of use for producing salad crops for any mission, for producing staple crops for medium duration missions, and for most food, air and water regeneration for long missions (durations of a decade). Potential applications of in situ resource utilization need to be considered further.

  6. Methodological Challenges in Studies Comparing Prehospital Advanced Life Support with Basic Life Support.

    Science.gov (United States)

    Li, Timmy; Jones, Courtney M C; Shah, Manish N; Cushman, Jeremy T; Jusko, Todd A

    2017-08-01

    Determining the most appropriate level of care for patients in the prehospital setting during medical emergencies is essential. A large body of literature suggests that, compared with Basic Life Support (BLS) care, Advanced Life Support (ALS) care is not associated with increased patient survival or decreased mortality. The purpose of this special report is to synthesize the literature to identify common study design and analytic challenges in research studies that examine the effect of ALS, compared to BLS, on patient outcomes. The challenges discussed in this report include: (1) choice of outcome measure; (2) logistic regression modeling of common outcomes; (3) baseline differences between study groups (confounding); (4) inappropriate statistical adjustment; and (5) inclusion of patients who are no longer at risk for the outcome. These challenges may affect the results of studies, and thus, conclusions of studies regarding the effect of level of prehospital care on patient outcomes should require cautious interpretation. Specific alternatives for avoiding these challenges are presented. Li T , Jones CMC , Shah MN , Cushman JT , Jusko TA . Methodological challenges in studies comparing prehospital Advanced Life Support with Basic Life Support. Prehosp Disaster Med. 2017;32(4):444-450.

  7. Groningen orthopaedic social support scale: Validity and reliability

    NARCIS (Netherlands)

    van den Akker-Scheek, I.; Stevens, M.; Spriensma, A.; van Horn, J.R.

    2004-01-01

    BACKGROUND: Social support is an important factor in the rehabilitation process, as it has a positive influence on patients' health, functioning and recovery. In particular, perceived social support and instrumental support are important after total hip or knee arthroplasty. However, nursing staff

  8. Reliability

    OpenAIRE

    Condon, David; Revelle, William

    2017-01-01

    Separating the signal in a test from the irrelevant noise is a challenge for all measurement. Low test reliability limits test validity, attenuates important relationships, and can lead to regression artifacts. Multiple approaches to the assessment and improvement of reliability are discussed. The advantages and disadvantages of several different approaches to reliability are considered. Practical advice on how to assess reliability using open source software is provided.

  9. Stress Rupture Life Reliability Measures for Composite Overwrapped Pressure Vessels

    Science.gov (United States)

    Murthy, Pappu L. N.; Thesken, John C.; Phoenix, S. Leigh; Grimes-Ledesma, Lorie

    2007-01-01

    Composite Overwrapped Pressure Vessels (COPVs) are often used for storing pressurant gases onboard spacecraft. Kevlar (DuPont), glass, carbon and other more recent fibers have all been used as overwraps. Due to the fact that overwraps are subjected to sustained loads for an extended period during a mission, stress rupture failure is a major concern. It is therefore important to ascertain the reliability of these vessels by analysis, since the testing of each flight design cannot be completed on a practical time scale. The present paper examines specifically a Weibull statistics based stress rupture model and considers the various uncertainties associated with the model parameters. The paper also examines several reliability estimate measures that would be of use for the purpose of recertification and for qualifying flight worthiness of these vessels. Specifically, deterministic values for a point estimate, mean estimate and 90/95 percent confidence estimates of the reliability are all examined for a typical flight quality vessel under constant stress. The mean and the 90/95 percent confidence estimates are computed using Monte-Carlo simulation techniques by assuming distribution statistics of model parameters based also on simulation and on the available data, especially the sample sizes represented in the data. The data for the stress rupture model are obtained from the Lawrence Livermore National Laboratories (LLNL) stress rupture testing program, carried out for the past 35 years. Deterministic as well as probabilistic sensitivities are examined.

  10. [Knowledge about basic life support in European students].

    Science.gov (United States)

    Marton, József; Pandúr, Attila; Pék, Emese; Deutsch, Krisztina; Bánfai, Bálint; Radnai, Balázs; Betlehem, József

    2014-05-25

    Better knowledge and skills of basic life support can save millions of lives each year in Europe. The aim of this study was to measure the knowledge about basic life support in European students. From 13 European countries 1527 volunteer participated in the survey. The questionnaire consisted of socio-demographic questions and knowledge regarding basic life support. The maximum possible score was 18. Those participants who had basic life support training earned 11.91 points, while those who had not participated in lifesaving education had 9.6 points (pbasic life support between students from different European countries. Western European youth, and those who were trained had better performance.

  11. Creation of closed life support systems

    Science.gov (United States)

    Gitelson, I.

    The 40-year-long experience in devising ecological systems with a significantly closed material cycling (CES), which are intended for human life support outside the Earth's biosphere, allows us to state that this problem has been largely solved technically. To test the terrestrial prototypes of these systems: Bios in Krasnoyarsk, the Terrestrial Ecological System (TES) in Moscow, and Bioplex in Houston, crews of humans stayed inside them over long periods of time. In Bios-3 humans could be fully (100%) provided with regenerated air and water and with a vegetable part (80%) of their diet. One human requires 4.5 kW of light energy, which is equal to the light energy incident on an 8-m2 surface perpendicular to solar rays in the Earth's orbit. The regeneration of air and water can be alternatively performed by a 17-L2 microalgal cultivator with a light-receiving surface of 8 m at 2 kW of light energy or by a conveyer culture of agricultural plants. To regenerate the vegetable part of2 the diet to the full, the area must increase to 31.5 m per person. Similar values have been obtained in the TES and in Bioplex. It can be concluded that the system is ready to be implemented in the engineering-technical designs of specific versions: for orbital flights, for missions to Mars and other planets, and for stations on the Moon and Mars. To improve the CES further, a number of new key problems should be resolved. The first of them are: to robotize the technological processes and to establish an optimized system of the internal control of the CES by the crew working in it; to develop a hybrid physicochemical-biological technology for returning the dead-end products of biosynthesis into the system's cycling; to solve the fundamental problem of regenerating the human ration completely inside the CES by the autotrophic chemo - and photosynthesis. Once this problem is solved, the energy requirements for life support in space will be significantly reduced. This will also considerably

  12. Is a 4-train support ''always'' more reliable than a 2-train support

    International Nuclear Information System (INIS)

    Guey, C.N.; Arrieta, L.; Youngblood, R.

    1986-06-01

    Once the gross features of a frontline fluid system have been defined, one must consider what support system configuration will provide the best overall system performance. This paper considers different dc bus configurations for a given emergency feedwater system. Results indicate that a four-train support system (i.e., 4 dc buses) gives a lower system unavailability for transients, but a higher system unavailability for Anticipated Transients Without Scram (ATWS), than a two-train support system (i.e., two dc buses). This serves to illustrate that more trains do not necessarily provide higher reliability, and that a configuration choice which is better for one mission success criterion may be worse for another. Because of the small characteristic unreliability of dc buses, the numerical comparisons made here are not dramatic, but the underlying topological point is nevertheless broadly applicable. The EFWS selected in this study consists of two turbine-driven pumps, and two motor-driven pumps, with associated piping, instruments, and valves. There are two divisions of EFWS, each division including one turbine-driven pump train, and one motor-driven pump train with a crosstie that can provide an alternate flow path in case one train is not available. Each of the motor-driven pumps has one ac power bus associated with it. No ac power is required for the turbine-driven trains

  13. Reliability Reporting Practices in Youth Life Satisfaction Research

    Science.gov (United States)

    Vassar, Matt; Hale, William

    2007-01-01

    Due to the emergence of positive psychology in recent years, a growing line of research has focused on aspects of psychological wellness rather than psychopathology. Within the context of positive psychology, life satisfaction has emerged as a key variable of study in relation to adult and youth populations. Accurate measurement of life…

  14. Life Support Filtration System Trade Study for Deep Space Missions

    Science.gov (United States)

    Agui, Juan H.; Perry, Jay L.

    2017-01-01

    The National Aeronautics and Space Administrations (NASA) technical developments for highly reliable life support systems aim to maximize the viability of long duration deep space missions. Among the life support system functions, airborne particulate matter filtration is a significant driver of launch mass because of the large geometry required to provide adequate filtration performance and because of the number of replacement filters needed to a sustain a mission. A trade analysis incorporating various launch, operational and maintenance parameters was conducted to investigate the trade-offs between the various particulate matter filtration configurations. In addition to typical launch parameters such as mass, volume and power, the amount of crew time dedicated to system maintenance becomes an increasingly crucial factor for long duration missions. The trade analysis evaluated these parameters for conventional particulate matter filtration technologies and a new multi-stage particulate matter filtration system under development by NASAs Glenn Research Center. The multi-stage filtration system features modular components that allow for physical configuration flexibility. Specifically, the filtration system components can be configured in distributed, centralized, and hybrid physical layouts that can result in considerable mass savings compared to conventional particulate matter filtration technologies. The trade analysis results are presented and implications for future transit and surface missions are discussed.

  15. Advanced Technologies to Improve Closure of Life Support Systems

    Science.gov (United States)

    Barta, Daniel J.

    2016-01-01

    As NASA looks beyond the International Space Station toward long-duration, deep space missions away from Earth, the current practice of supplying consumables and spares will not be practical nor affordable. New approaches are sought for life support and habitation systems that will reduce dependency on Earth and increase mission sustainability. To reduce launch mass, further closure of Environmental Control and Life Support Systems (ECLSS) beyond the current capability of the ISS will be required. Areas of particular interest include achieving higher degrees of recycling within Atmosphere Revitalization, Water Recovery and Waste Management Systems. NASA is currently investigating advanced carbon dioxide reduction processes that surpass the level of oxygen recovery available from the Sabatier Carbon Dioxide Reduction Assembly (CRA) on the ISS. Candidate technologies will potentially improve the recovery of oxygen from about 50% (for the CRA) to as much as 100% for technologies who's end product is solid carbon. Improving the efficiency of water recycling and recovery can be achieved by the addition of advanced technologies to recover water from brines and solid wastes. Bioregenerative technologies may be utilized for water reclaimation and also for the production of food. Use of higher plants will simultaneously benefit atmosphere revitalization and water recovery through photosynthesis and transpiration. The level at which bioregenerative technologies are utilized will depend on their comparative requirements for spacecraft resources including mass, power, volume, heat rejection, crew time and reliability. Planetary protection requirements will need to be considered for missions to other solar system bodies.

  16. Evolution of Machine Reliability and Life and Economics of Operational Use

    Directory of Open Access Journals (Sweden)

    Młynarski Stanisław

    2016-12-01

    Full Text Available The article presents new assumptions for reliability and life of machines, resulting from the development of technology. The innovative approach to reliability and life design as well as warranty duration planning is presented on an example of vehicle reliability characteristics. A new algorithm is proposed for the replacement of repairable objects costs by the price of life and reliability of new unrepairable ones. For the planning of the life of innovative machines, an effective method of technical progress rate determination is proposed. In conclusion, necessary modifications of machine and vehicle use systems, resulting from technology evolution and technical progress, are indicated. Finally, recommendations and directions of indispensable research in engineering and management of technical means of production are formulated.

  17. A Note on the Score Reliability for the Satisfaction with Life Scale: An RG Study

    Science.gov (United States)

    Vassar, Matt

    2008-01-01

    The purpose of the present study was to meta-analytically investigate the score reliability for the Satisfaction With Life Scale. Four-hundred and sixteen articles using the measure were located through electronic database searches and then separated to identify studies which had calculated reliability estimates from their own data. Sixty-two…

  18. Life Satisfaction Questionnaire (Lisat-9): Reliability and Validity for Patients with Acquired Brain Injury

    Science.gov (United States)

    Boonstra, Anne M.; Reneman, Michiel F.; Stewart, Roy E.; Balk, Gerlof A.

    2012-01-01

    The aim of this study was to determine the reliability and discriminant validity of the Dutch version of the life satisfaction questionnaire (Lisat-9 DV) to assess patients with an acquired brain injury. The reliability study used a test-retest design, and the validity study used a cross-sectional design. The setting was the general rehabilitation…

  19. Nonlinear Dynamic Models in Advanced Life Support

    Science.gov (United States)

    Jones, Harry

    2002-01-01

    To facilitate analysis, ALS systems are often assumed to be linear and time invariant, but they usually have important nonlinear and dynamic aspects. Nonlinear dynamic behavior can be caused by time varying inputs, changes in system parameters, nonlinear system functions, closed loop feedback delays, and limits on buffer storage or processing rates. Dynamic models are usually cataloged according to the number of state variables. The simplest dynamic models are linear, using only integration, multiplication, addition, and subtraction of the state variables. A general linear model with only two state variables can produce all the possible dynamic behavior of linear systems with many state variables, including stability, oscillation, or exponential growth and decay. Linear systems can be described using mathematical analysis. Nonlinear dynamics can be fully explored only by computer simulations of models. Unexpected behavior is produced by simple models having only two or three state variables with simple mathematical relations between them. Closed loop feedback delays are a major source of system instability. Exceeding limits on buffer storage or processing rates forces systems to change operating mode. Different equilibrium points may be reached from different initial conditions. Instead of one stable equilibrium point, the system may have several equilibrium points, oscillate at different frequencies, or even behave chaotically, depending on the system inputs and initial conditions. The frequency spectrum of an output oscillation may contain harmonics and the sums and differences of input frequencies, but it may also contain a stable limit cycle oscillation not related to input frequencies. We must investigate the nonlinear dynamic aspects of advanced life support systems to understand and counter undesirable behavior.

  20. The List of Threatening Experiences: the reliability and validity of a brief life events questionnaire.

    Science.gov (United States)

    Brugha, T S; Cragg, D

    1990-07-01

    During the 23 years since the original work of Holmes & Rahe, research into stressful life events on human subjects has tended towards the development of longer and more complex inventories. The List of Threatening Experiences (LTE) of Brugha et al., by virtue of its brevity, overcomes difficulties of clinical application. In a study of 50 psychiatric patients and informants, the questionnaire version of the list (LTE-Q) was shown to have high test-retest reliability, and good agreement with informant information. Concurrent validity, based on the criterion of independently rated adversity derived from a semistructured life events interview, making use of the Life Events and Difficulties Scales (LEDS) method developed by Brown & Harris, showed both high specificity and sensitivity. The LTE-Q is particularly recommended for use in psychiatric, psychological and social studies in which other intervening variables such as social support, coping, and cognitive variables are of interest, and resources do not allow for the use of extensive interview measures of stress.

  1. A summary of methods of predicting reliability life of nuclear equipment with small samples

    International Nuclear Information System (INIS)

    Liao Weixian

    2000-03-01

    Some of nuclear equipment are manufactured in small batch, e.g., 1-3 sets. Their service life may be very difficult to determine experimentally in view of economy and technology. The method combining theoretical analysis with material tests to predict the life of equipment is put forward, based on that equipment consists of parts or elements which are made of different materials. The whole life of an equipment part consists of the crack forming life (i.e., the fatigue life or the damage accumulation life) and the crack extension life. Methods of predicting machine life has systematically summarized with the emphasis on those which use theoretical analysis to substitute large scale prototype experiments. Meanwhile, methods and steps of predicting reliability life have been described by taking into consideration of randomness of various variables and parameters in engineering. Finally, the latest advance and trends of machine life prediction are discussed

  2. Reliability and life-cycle analysis of deteriorating systems

    CERN Document Server

    Sánchez-Silva, Mauricio

    2016-01-01

    This book compiles and critically discusses modern engineering system degradation models and their impact on engineering decisions. In particular, the authors focus on modeling the uncertain nature of degradation considering both conceptual discussions and formal mathematical formulations. It also describes the basics concepts and the various modeling aspects of life-cycle analysis (LCA).  It highlights the role of degradation in LCA and defines optimum design and operation parameters. Given the relationship between operational decisions and the performance of the system’s condition over time, maintenance models are also discussed. The concepts and models presented have applications in a large variety of engineering fields such as Civil, Environmental, Industrial, Electrical and Mechanical engineering. However, special emphasis is given to problems related to large infrastructure systems. The book is intended to be used both as a reference resource for researchers and practitioners and as an academic text ...

  3. Engineering support for plant life management: the IAEA contribution

    International Nuclear Information System (INIS)

    Kang, K.; Hezoucky, F.; Clark, R. C.; )

    2007-01-01

    For the past couple of decades there has been a change of emphasis in the world nuclear power from that of building new Nuclear Power Plants (NPP) to that of taking measures to optimize the life cycle of operational plants. National approaches in many countries showed an increase of interest in Plant Life Management (PLiM), both in terms of plant service life assurance and in optimizing the service or operational life of NPP. The safety considerations of a NPP are paramount and those requirements have to be met to obtain and to extend/renew the operating license. To achieve the goal of the long term safe, economic and reliable operation of the plant, PLiM programme is essential. Some countries already have advanced PLiM programmes while others still have none. The PLiM objective is to identify all that factors and requirements for the overall plant life cycle. The optimization of these requirements would allow for the minimum period of the investment return and maximum of the revenue from the sell of the produced electricity. Recognizing the importance of this issue and in response to the requests of the Member States the IAEA Division of Nuclear Power implements the Sub-programme on 'Engineering and Management Support for Competitive Nuclear Power'. Three projects within this sub-programme deal with different aspects of the NPP life cycle management with the aim to increase the capabilities of interested Member States in implementing and maintenance of the competitive and sustainable nuclear power. Although all three projects contain certain issues of PLiM, there is one specific project on guidance on engineering and management practices for optimization of NPP service life. This particular project deals with different specific issues of PLiM including aspects of ageing phenomena and their monitoring, issues of control and instrumentation, maintenance and operation issues, economic evaluation of PLiM including guidance on its earlier shut down and decommissioning

  4. Reliability analysis of idealized tunnel support system using probability-based methods with case studies

    Science.gov (United States)

    Gharouni-Nik, Morteza; Naeimi, Meysam; Ahadi, Sodayf; Alimoradi, Zahra

    2014-06-01

    In order to determine the overall safety of a tunnel support lining, a reliability-based approach is presented in this paper. Support elements in jointed rock tunnels are provided to control the ground movement caused by stress redistribution during the tunnel drive. Main support elements contribute to stability of the tunnel structure are recognized owing to identify various aspects of reliability and sustainability in the system. The selection of efficient support methods for rock tunneling is a key factor in order to reduce the number of problems during construction and maintain the project cost and time within the limited budget and planned schedule. This paper introduces a smart approach by which decision-makers will be able to find the overall reliability of tunnel support system before selecting the final scheme of the lining system. Due to this research focus, engineering reliability which is a branch of statistics and probability is being appropriately applied to the field and much effort has been made to use it in tunneling while investigating the reliability of the lining support system for the tunnel structure. Therefore, reliability analysis for evaluating the tunnel support performance is the main idea used in this research. Decomposition approaches are used for producing system block diagram and determining the failure probability of the whole system. Effectiveness of the proposed reliability model of tunnel lining together with the recommended approaches is examined using several case studies and the final value of reliability obtained for different designing scenarios. Considering the idea of linear correlation between safety factors and reliability parameters, the values of isolated reliabilities determined for different structural components of tunnel support system. In order to determine individual safety factors, finite element modeling is employed for different structural subsystems and the results of numerical analyses are obtained in

  5. Further HTGR core support structure reliability studies. Interim report No. 1

    International Nuclear Information System (INIS)

    Platus, D.L.

    1976-01-01

    Results of a continuing effort to investigate high temperature gas cooled reactor (HTGR) core support structure reliability are described. Graphite material and core support structure component physical, mechanical and strength properties required for the reliability analysis are identified. Also described are experimental and associated analytical techniques for determining the required properties, a procedure for determining number of tests required, properties that might be monitored by special surveillance of the core support structure to improve reliability predictions, and recommendations for further studies. Emphasis in the study is directed towards developing a basic understanding of graphite failure and strength degradation mechanisms; and validating analytical methods for predicting strength and strength degradation from basic material properties

  6. A New Approach for Reliability Life Prediction of Rail Vehicle Axle by Considering Vibration Measurement

    Directory of Open Access Journals (Sweden)

    Meral Bayraktar

    2014-01-01

    Full Text Available The effect of vibration on the axle has been considered. Vibration measurements at different speeds have been performed on the axle of a running rail vehicle to figure out displacement, acceleration, time, and frequency response. Based on the experimental works, equivalent stress has been used to find out life of the axles for 90% and 10% reliability. Calculated life values of the rail vehicle axle have been compared with the real life data and it is found that the life of a vehicle axle taking into account the vibration effects is in good agreement with the real life of the axle.

  7. Validation and reliability of the Turkish Utian Quality-of-Life Scale in postmenopausal women.

    Science.gov (United States)

    Abay, Halime; Kaplan, Sena

    2016-04-01

    There are a limited number of menopause-specific quality-of-life scales for the Turkish population. This study was conducted to evaluate the validity and reliability of the Turkish Utian Quality-of-Life Scale in postmenopausal women. The study group was comprised of 250 postmenopausal women who applied to a training and research hospital's menopause clinic in Turkey. A survey form and the Turkish Utian quality-of-Life Scale were used to collect data, and the Turkish version of Short Form-36 was used to evaluate reliability with an equivalent form. Language-validity, content-validity, and construct-validity methods were used to assess the validity of the scale, and Cronbach's α coefficient calculation and the equivalent-form reliability methods were used to assess the reliability of the scale. The Turkish Utian Quality-of-Life Scale was determined to be a valid and reliable instrument for measuring the quality of life of postmenopausal women. Confirmatory factor analysis demonstrates that the instrument fits well with 23 items and a four-factor model. The Cronbach's α coefficient for the quality-of-life domains were as follows: 0.88 overall, 0.79 health, 0.78 emotional, 0.76 sexual, and 0.75 occupational. Reliability of the instrument was confirmed through significant correlations between scores on the Turkish version of the Utian Quality-of-Life Scale and the Turkish version of the Short Form-36 (r = 0.745, P measuring quality of life during menopause.

  8. Supporting change processes in design: Complexity, prediction and reliability

    Energy Technology Data Exchange (ETDEWEB)

    Eckert, Claudia M. [Engineering Design Centre, University of Cambridge, Trumpington Street, Cambridge, CB2 1PZ (United Kingdom)]. E-mail: cme26@cam.ac.uk; Keller, Rene [Engineering Design Centre, University of Cambridge, Trumpington Street, Cambridge, CB2 1PZ (United Kingdom)]. E-mail: rk313@cam.ac.uk; Earl, Chris [Open University, Department of Design and Innovation, Walton Hall, Milton Keynes MK7 6AA (United Kingdom)]. E-mail: C.F.Earl@open.ac.uk; Clarkson, P. John [Engineering Design Centre, University of Cambridge, Trumpington Street, Cambridge, CB2 1PZ (United Kingdom)]. E-mail: pjc10@cam.ac.uk

    2006-12-15

    Change to existing products is fundamental to design processes. New products are often designed through change or modification to existing products. Specific parts or subsystems are changed to similar ones whilst others are directly reused. Design by modification applies particularly to safety critical products where the reuse of existing working parts and subsystems can reduce cost and risk. However change is rarely a matter of just reusing or modifying parts. Changing one part can propagate through the entire design leading to costly rework or jeopardising the integrity of the whole product. This paper characterises product change based on studies in the aerospace and automotive industry and introduces tools to aid designers in understanding the potential effects of change. Two ways of supporting designers are described: probabilistic prediction of the effects of change and visualisation of change propagation through product connectivities. Change propagation has uncertainties which are amplified by the choices designers make in practice as they implement change. Change prediction and visualisation is discussed with reference to complexity in three areas of product development: the structural backcloth of connectivities in the existing product (and its processes), the descriptions of the product used in design and the actions taken to carry out changes.

  9. Is advanced life support better than basic life support in prehospital care? A systematic review

    Directory of Open Access Journals (Sweden)

    Ryynänen Olli-Pekka

    2010-11-01

    Full Text Available Abstract Background - Prehospital care is classified into ALS- (advanced life support and BLS- (basic life support levels according to the methods used. ALS-level prehospital care uses invasive methods, such as intravenous fluids, medications and intubation. However, the effectiveness of ALS care compared to BLS has been questionable. Aim - The aim of this systematic review is to compare the effectiveness of ALS- and BLS-level prehospital care. Material and methods - In a systematic review, articles where ALS-level prehospital care was compared to BLS-level or any other treatment were included. The outcome variables were mortality or patient's health-related quality of life or patient's capacity to perform daily activities. Results - We identified 46 articles, mostly retrospective observational studies. The results on the effectiveness of ALS in unselected patient cohorts are contradictory. In cardiac arrest, early cardiopulmonary resuscitation and defibrillation are essential for survival, but prehospital ALS interventions have not improved survival. Prehospital thrombolytic treatment reduces mortality in patients having a myocardial infarction. The majority of research into trauma favours BLS in the case of penetrating trauma and also in cases of short distance to a hospital. In patients with severe head injuries, ALS provided by paramedics and intubation without anaesthesia can even be harmful. If the prehospital care is provided by an experienced physician and by a HEMS organisation (Helicopter Emergency Medical Service, ALS interventions may be beneficial for patients with multiple injuries and severe brain injuries. However, the results are contradictory. Conclusions - ALS seems to improve survival in patients with myocardial infarction and BLS seems to be the proper level of care for patients with penetrating injuries. Some studies indicate a beneficial effect of ALS among patients with blunt head injuries or multiple injuries. There is

  10. The Persian Version of the "Life Satisfaction Scale": Construct Validity and Test-Re-Test Reliability among Iranian Older Adults.

    Science.gov (United States)

    Moghadam, Manije; Salavati, Mahyar; Sahaf, Robab; Rassouli, Maryam; Moghadam, Mojgan; Kamrani, Ahmad Ali Akbari

    2018-03-01

    After forward-backward translation, the LSS was administered to 334 Persian speaking, cognitively healthy elderly aged 60 years and over recruited through convenience sampling. To analyze the validity of the model's constructs and the relationships between the constructs, a confirmatory factor analysis followed by PLS analysis was performed. The Construct validity was further investigated by calculating the correlations between the LSS and the "Short Form Health Survey" (SF-36) subscales measuring similar and dissimilar constructs. The LSS was re-administered to 50 participants a month later to assess the reliability. For the eight-factor model of the life satisfaction construct, adequate goodness of fit between the hypothesized model and the model derived from the sample data was attained (positive and statistically significant beta coefficients, good R-squares and acceptable GoF). Construct validity was supported by convergent and discriminant validity, and correlations between the LSS and SF-36 subscales. Minimum Intraclass Correlation Coefficient level of 0.60 was exceeded by all subscales. Minimum level of reliability indices (Cronbach's α, composite reliability and indicator reliability) was exceeded by all subscales. The Persian-version of the Life Satisfaction Scale is a reliable and valid instrument, with psychometric properties which are consistent with the original version.

  11. Validity and reliability of the Portuguese-Brazilian version of the Quality of Life in Epilepsy Inventory-89.

    Science.gov (United States)

    Azevedo, Auro Mauro; Alonso, Neide Barreira; Vidal-Dourado, Marcos; Noffs, Maria Helena da Silva; Pascalicchio, Tatiana Frascarelli; Caboclo, Luís Otávio Sales Ferreira; Ciconelli, Rozana Mesquita; Sakamoto, Américo Ceiki; Yacubian, Elza Márcia Targas

    2009-03-01

    The purpose of this article was to report the translation of the Quality of Life in Epilepsy Inventory-89 (QOLIE-89) into a Portuguese-Brazilian version and evaluate its reliability and validity. This study involved 105 outpatients: 54 patients with refractory temporal lobe epilepsy (TLE) with mesial temporal sclerosis (MTS) and 51 with juvenile myoclonic epilepsy (JME). Reliability and test-retest reliability were assessed. Relationships between QOLIE-89 domains and other questionnaires (Nottingham Health Profile, Beck Depression Inventory, Adverse Event Profile, Neuropsychological Evaluation), and external measures such as demographic and clinical variables were analyzed to examine construct validity. Internal consistency (Cronbach's alpha=0.73-0.92) and test-retest reliability (intraclass correlation coefficient=0.60-0.84) for individual domains were acceptable. For construct validity, we verified high correlations between the QOLIE-89 and the Nottingham Health Profile, Beck Depression Inventory, Adverse Event Profile, and Neuropsychological Evaluation. For clinical characteristics, the patients with juvenile myoclonic epilepsy had better quality-of-life scores on 11 of 17 QOLIE-89 subscales compared with patients with temporal lobe epilepsy (P<0.05). These results support the reliability and validity of the Portuguese-Brazilian translation of QOLIE-89.

  12. Reliability analysis of idealized tunnel support system using probability-based methods with case studies

    NARCIS (Netherlands)

    Gharouni-Nik, M.; Naeimi, M.; Ahadi, S.; Alimoradi, Z.

    2014-01-01

    In order to determine the overall safety of a tunnel support lining, a reliability-based approach is presented in this paper. Support elements in jointed rock tunnels are provided to control the ground movement caused by stress redistribution during the tunnel drive. Main support elements contribute

  13. Subjective Quality of Life and Perceived Adequacy of Social Support ...

    African Journals Online (AJOL)

    One such major concern pertains to the very general experiences of life of the elderly and associated factors. The purpose of this study was then to specifically assess the subjective quality of life and perceived adequacy of social support and the possible socio-demographic factors making differences in quality of life.

  14. Improving basic life support training for medical students

    OpenAIRE

    Lami, Mariam; Nair, Pooja; Gadhvi, Karishma

    2016-01-01

    Mariam Lami, Pooja Nair, Karishma GadhviFaculty of Medicine, Imperial College, London, London, UKAbstract: Questions have been raised about basic life support (BLS) training in medical education. This article addresses the research evidence behind why BLS training is inadequate and suggests recommendations for improving BLS training for medical students.Keywords: medical education, basic life support

  15. Perceived psychosocial needs, social support and quality of life in ...

    African Journals Online (AJOL)

    Subjects with late-stage HIV infection reported a lower social adjustment to the disease, a lower quality of life and more severe lifestyle changes. Satisfaction with social support correlated significantly with quality of life and social adjustment. It is therefore concluded that the higher the level of satisfaction with social support, ...

  16. Parametric and semiparametric models with applications to reliability, survival analysis, and quality of life

    CERN Document Server

    Nikulin, M; Mesbah, M; Limnios, N

    2004-01-01

    Parametric and semiparametric models are tools with a wide range of applications to reliability, survival analysis, and quality of life. This self-contained volume examines these tools in survey articles written by experts currently working on the development and evaluation of models and methods. While a number of chapters deal with general theory, several explore more specific connections and recent results in "real-world" reliability theory, survival analysis, and related fields.

  17. A Chinese version of the City of Hope Quality of Life-Ostomy Questionnaire: validity and reliability assessment.

    Science.gov (United States)

    Gao, Wenjun; Yuan, Changrong; Wang, Jichuan; Du, Jiarui; Wu, Huiqiao; Qian, Xiaojie; Hinds, Pamela S

    2013-01-01

    The City of Hope Quality of Life-Ostomy Questionnaire is a widely accepted scale to assess quality of life in ostomy patients. However, the validity and reliability of the Chinese version (C-COH) have not been studied. The objective of the study was to assess the validity and reliability of the C-COH among ostomy patients sampled from Shanghai from August 2010 to June 2011. Content validity was examined based on the reviews of a panel of 10 experts; test-retest was conducted to assess the item reliabilities of the scale; a pilot sample (n = 274) was selected to explore the factorial structure of the C-COH using exploratory factor analysis; a validation sample (n = 370) was selected to confirm the findings from the exploratory study using confirmatory factor analysis (CFA). Statistical package SPSS version 16.0 was used for the exploratory factor analysis, and Amos 17.0 was used for the CFA. The C-COH was developed by modifying 1 item and excluding 11 items from the original scale. Four factors/subscales (physical well-being, psychological well-being, social well-being, and spiritual well-being) were identified and confirmed in the C-COH The scale reliabilities estimated from the CFA results for the 4 subscales were 0.860, 0.885, 0.864, and 0.686, respectively. Findings support the reliability and validity of the C-COH. The C-COH could be a useful measure of the level of quality of life among Chinese patients with a stoma and may provide important intervention implications for healthcare providers to help improve the life quality of patients with a stoma.

  18. Adaptability and Life Satisfaction: The Moderating Role of Social Support

    Science.gov (United States)

    Zhou, Mi; Lin, Weipeng

    2016-01-01

    The purpose of this study was to investigate the moderating role of social support in the relationship between adaptability and life satisfaction. Data were collected from 99 undergraduate freshmen in a Chinese university using a lagged design with a 1-month interval. Results demonstrated that social support moderated the relation between adaptability and life satisfaction, such that the positive relation between adaptability and life satisfaction was stronger for individuals with higher levels of social support than for individuals with lower levels of social support. The theoretical and practical implications of this result are discussed. PMID:27516753

  19. Adaptability and Life Satisfaction: The Moderating Role of Social Support.

    Science.gov (United States)

    Zhou, Mi; Lin, Weipeng

    2016-01-01

    The purpose of this study was to investigate the moderating role of social support in the relationship between adaptability and life satisfaction. Data were collected from 99 undergraduate freshmen in a Chinese university using a lagged design with a 1-month interval. Results demonstrated that social support moderated the relation between adaptability and life satisfaction, such that the positive relation between adaptability and life satisfaction was stronger for individuals with higher levels of social support than for individuals with lower levels of social support. The theoretical and practical implications of this result are discussed.

  20. Long-term Mechanical Circulatory Support System reliability recommendation by the National Clinical Trial Initiative subcommittee.

    Science.gov (United States)

    Lee, James

    2009-01-01

    The Long-Term Mechanical Circulatory Support (MCS) System Reliability Recommendation was published in the American Society for Artificial Internal Organs (ASAIO) Journal and the Annals of Thoracic Surgery in 1998. At that time, it was stated that the document would be periodically reviewed to assess its timeliness and appropriateness within 5 years. Given the wealth of clinical experience in MCS systems, a new recommendation has been drafted by consensus of a group of representatives from the medical community, academia, industry, and government. The new recommendation describes a reliability test methodology and provides detailed reliability recommendations. In addition, the new recommendation provides additional information and clinical data in appendices that are intended to assist the reliability test engineer in the development of a reliability test that is expected to give improved predictions of clinical reliability compared with past test methods. The appendices are available for download at the ASAIO journal web site at www.asaiojournal.com.

  1. Closure of Regenerative Life Support Systems: Results of the Lunar-Mars Life Support Test Project

    Science.gov (United States)

    Barta, Daniel; Henninger, D.; Edeen, M.; Lewis, J.; Smth, F.; Verostko, C.

    2006-01-01

    Future long duration human exploration missions away from Earth will require closed-loop regenerative life support systems to reduce launch mass, reduce dependency on resupply and increase the level of mission self sufficiency. Such systems may be based on the integration of biological and physiocochemical processes to produce potable water, breathable atmosphere and nutritious food from metabolic and other mission wastes. Over the period 1995 to 1998 a series of ground-based tests were conducted at the National Aeronautics and Space Administration, Johnson Space Center, to evaluate the performance of advanced closed-loop life support technologies with real human metabolic and hygiene loads. Named the Lunar-Mars Life Support Test Project (LMLSTP), four integrated human tests were conducted with increasing duration, complexity and closure. The first test, LMLSTP Phase I, was designed to demonstrate the ability of higher plants to revitalize cabin atmosphere. A single crew member spent 15 days within an atmospherically closed chamber containing 11.2 square meters of actively growing wheat. Atmospheric carbon dioxide and oxygen levels were maintained by control of the rate of photosynthesis through manipulation of light intensity or the availability of carbon dioxide and included integrated physicochemical systems. During the second and third tests, LMLSTP Phases II & IIa, four crew members spent 30 days and 60 days, respectively, in a larger sealed chamber. Advanced physicochemical life support hardware was used to regenerate the atmosphere and produce potable water from wastewater. Air revitalization was accomplished by using a molecular sieve and a Sabatier processor for carbon dioxide absorption and reduction, respectively, with oxygen generation performed by water hydrolysis. Production of potable water from wastewater included urine treatment (vapor compression distillation), primary treatment (ultrafiltration/reverse osmosis and multi-filtration) and post

  2. Can basic life support personnel safely determine that advanced life support is not needed?

    Science.gov (United States)

    Cone, D C; Wydro, G C

    2001-01-01

    To determine whether firefighter/emergency medical technicians-basic (FF/EMT-Bs) staffing basic life support (BLS) ambulances in a two-tiered emergency medical services (EMS) system can safely determine when advanced life support (ALS) is not needed. This was a prospective, observational study conducted in two academic emergency departments (EDs) receiving patients from a large urban fire-based EMS system. Runs were studied to which ALS and BLS ambulances were simultaneously dispatched, with the patient transported by the BLS unit. Prospectively established criteria for potential need for ALS were used to determine whether the FF/EMT-B's decision to cancel the ALS unit was safe, and simple outcomes (admission rate, length of stay, mortality) were examined. In the system studied, BLS crews may cancel responding ALS units at their discretion; there are no protocols or medical criteria for cancellation. A convenience sample of 69 cases was collected. In 52 cases (75%), the BLS providers indicated that they cancelled the responding ALS unit because they did not feel ALS was needed. Of these, 40 (77%) met study criteria for ALS: 39 had potentially serious chief complaints, nine had abnormal vital signs, and ten had physical exam findings that warranted ALS. Forty-five (87%) received an intervention immediately upon ED arrival that could have been provided in the field by an ALS unit, and 16 (31%) were admitted, with a median length of stay of 3.3 days (range 1.1-73.4 days). One patient died. Firefighter/EMT-Bs, working without protocols or medical criteria, cannot always safely determine which patients may require ALS intervention.

  3. Effect of Diamondlike Carbon Coating on Reliability of Implant-Supported Crowns.

    Science.gov (United States)

    Hirata, Ronaldo; Machado, Lucas Silveira; Bonfante, Estevam A; Yamaguchi, Satoshi; Imazato, Satoshi; Coelho, Paulo G

    2015-01-01

    To evaluate the effect of diamondlike carbon (DLC) coating on abutments and/or abutment screws on the reliability, characteristic strength, and Weibull modulus of implant-supported single crowns. Seventy-two external hexagon implants (Emfills Implant 4 mm diameter, 10 mm length, Emfills) were divided into four groups (n = 18 each), according to the presence or not of a DLC coating in the abutment and/or abutment screw, as follows: abutment without coating, screw without coating (AwcSwc); abutment without coating with coated screw (AwcSC); abutment coated with noncoated screw (ACSwc), and coated abutment with coated screw (ACSC). Abutments and screws were evaluated with scanning electron microscopy. The specimens were subjected to step-stress accelerated life testing in water. Use-level probability Weibull curves and reliability for a mission of 100,000 cycles at 150 N (90% two-sided confidence intervals) were calculated. Polarized light and scanning electron microscopes were used for fractographic analysis. For a mission of 100,000 cycles at 150 N, reliability was 0.45 (0.20 to 0.67), 0.12 (0.00 to 0.47), 0.56 (0.17 to 0.82), and 0.44 (0.07 to 0.77) for AwcSwc, AwcSC, ACSwc, and ACSC, respectively. The probability Weibull calculation showed a Weibull modulus (m) of m = 5.50, m = 11.64, m = 16.96, and m = 15.08 and the characteristic strengths (η, which indicates the load at which 63.2% of the specimens of each group fail) of η = 202.67 N, ŋ = 206.64 N, ŋ = 192.54 N, and ŋ = 203.59 N for AwcSwc, AwcSC, ACSwc, and ACSC, respectively. Abutment screw fracture was the chief failure outcome in all groups. Characteristic strength values were not different among groups; neither was reliability. However, an increase in Weibull modulus (indicating low variability of the results) was observed with DLC coating of abutment or screw or both.

  4. Life support for aquatic species - past; present; future

    Science.gov (United States)

    Slenzka, K.

    Life Support is a basic issue since manned space flight began. Not only to support astronauts and cosmonauts with the essential things to live, however, also animals which were carried for research to space etc together with men need support systems to survive under space conditions. Most of the animals transported to space participate at the life support system of the spacecraft. However, aquatic species live in water as environment and thus need special developments. Research with aquatic animals has a long tradition in manned space flight resulting in numerous life support systems for them starting with simple plastic bags up to complex support hardware. Most of the recent developments have to be identified as part of a technological oriented system and can be described as small technospheres. As the importance arose to study our Earth as the extraordinary Biosphere we live in, the modeling of small ecosystems began as part of ecophysiological research. In parallel the investigations of Bioregenerative Life Support Systems were launched and identified as necessity for long-term space missions or traveling to Moon and Mars and beyond. This paper focus on previous developments of Life Support Systems for aquatic animals and will show future potential developments towards Bioregenerative Life Support which additionally strongly benefits to our Earth's basic understanding.

  5. Reliability and validity of the perspectives of Support From God Scale.

    Science.gov (United States)

    Hamilton, Jill B; Crandell, Jamie L; Carter, J Kameron; Lynn, Mary R

    2010-01-01

    Existing spiritual support scales for use with cancer survivors focus on the support believed to come from a religious community, clergy, or health care providers. The objective of this study was to evaluate the reliability and validity of a new measure of spiritual support believed to come from God in older Christian African American cancer survivors. The Perceived Support From God Scale was administered to 317 African American cancer survivors aged 55-89 years. Psychometric evaluation involved identifying underlying factors, conducting item analysis and estimating reliability, and obtaining evidence on the relationship to other variables or the extent to which the Perceived Support From God Scale correlates with religious involvement and depression. The Perceived Support From God Scale consists of 15 items in two subscales (Support From God and God's Purpose for Me). The two subscales explained 59% of the variance. Cronbach's alpha coefficients were .94 and .86 for the Support From God and God's Purpose for Me subscales, respectively. Test-retest correlations were strong, supporting the temporal stability of the instrument. Pearson's correlations to an existing religious involvement and beliefs scale were moderate to strong. Subscale scores on Support From God were negatively correlated to depression. Initial support for reliability and validity was demonstrated for the Perceived Support From God Scale. The scale captures a facet of spirituality not emphasized in other measures. Further research is needed to evaluate the scale with persons of other racial/ethnic groups and to explore the relationship of spirituality to other outcome measures.

  6. A Reliability-Based Determination of Economic Life of Marine power plants

    International Nuclear Information System (INIS)

    Atua, K.

    1999-01-01

    The reliability-based life approach is utilized. Selective failure modes of marine power plants are used for illustration. A case study of the Egyptian Commercial Fleet owned by the Public Sector Company was analyzed and used to establish a demonstration of the expected economic life based on local operating and maintenance conditions. The data acquired is analyzed and failure trend is derived for each failure mode. Probabilistic techniques are used to randomly generate numbers and times of occurrence of different failure modes. The reliability analysis is performed on the life span expected by the manufacture to predict the total number of failures, dependent failures, and cost of failures. Total expenditure due to random failure and cost of scheduled maintenance together with the annual income are utilized (using the time value of money) to determine the economic life of the plant. Conclusions are derived and recommendations for the enhancement of this work in the future are made

  7. The European Portuguese WHOQOL-OLD module and the new facet Family/Family life: reliability and validity studies.

    Science.gov (United States)

    Vilar, Manuela; Sousa, Liliana B; Simões, Mário R

    2016-09-01

    The aim of this study was to examine the psychometric properties of the European Portuguese version of the World Health Organization Quality of Life-Older Adults Module (WHOQOL-OLD). The European Portuguese WHOQOL-OLD includes a new identified facet, Family/Family life. A convenience sample of older adults was recruited (N = 921). The assessment protocol included demographics, self-perceived health, depressive symptoms (GDS-30), cognitive function (ACE-R), daily life activities (IAFAI), health status (SF-12) and QoL (WHOQOL-Bref, EUROHIS-QOL-8 and WHOQOL-OLD). The internal consistency was excellent for the total 24-item WHOQOL-OLD original version and also for the final 28-item European Portuguese WHOQOL-OLD version. The test-retest reliability for total scores was good. The construct validity of the European Portuguese WHOQOL-OLD was supported in the correlation matrix analysis. The results indicated good convergent/divergent validity. The WHOQOL-OLD scores differentiated groups of older adults who were healthy/unhealthy and without/mild/severe depressive symptoms. The new facet, Family/Family life, presented evidence of good reliability and validity parameters. Comparatively to international studies, the European Portuguese WHOQOL-OLD version showed similar and/or better psychometric properties. The new facet, Family/Family life, introduces cross-cultural specificity to the study of QoL of older adults and generally improves the psychometric robustness of the WHOQOL-OLD.

  8. Study of basic-life-support training for college students.

    Science.gov (United States)

    Srivilaithon, Winchana; Amnaumpatanapon, Kumpon; Limjindaporn, Chitlada; Imsuwan, Intanon; Daorattanachai, Kiattichai

    2015-03-01

    To study about attitude and knowledge regarding basic-life-support among college students outside medical system. The cross-sectional study in the emergency department of Thammasat Hospital. The authors included college students at least aged 18 years old and volunteers to be study subjects. The authors collected data about attitudes and knowledge in performing basic-life-support by using set of questionnaires. 250 college students participated in the two hours trainingprogram. Most ofparticipants (42.4%) were second-year college students, of which 50 of 250 participants (20%) had trained in basic-life-support program. Twenty-seven of 250 participants (10.8%) had experience in basic-life-support outside the hospital. Most of participants had good attitude for doing basic-life-support. Participants had a significant improved score following training (mean score 8.66 and 12.34, respectively, pbasic-life-support to cardiac arrest patient. The training program in basic-life-support has significant impact on knowledge after training.

  9. Social support moderates caregiver life satisfaction following traumatic brain injury.

    Science.gov (United States)

    Ergh, Tanya C; Hanks, Robin A; Rapport, Lisa J; Coleman, Renee D

    2003-12-01

    Social support is an important determinant of adjustment following traumatic brain injury (TBI) sustained by a family member. The present study examined the extent to which social support moderates the influence of characteristics of the person with injury on caregiver subjective well-being. Sixty pairs of individuals who had sustained a moderate to severe TBI and their caregivers (N=120) participated. Years postinjury ranged from 0.3 to 9.9 ( M=4.8, SD=2.6). Cognitive, functional, and neurobehavioral functioning of participants with TBI were assessed using neuropsychological tests and rating scales. Caregiver life satisfaction and perceived social support were assessed using self-report questionnaires. Results indicated that time since injury was unrelated to life satisfaction. Neurobehavioral disturbances showed an inverse relation with life satisfaction. Social support emerged as an important moderator of life satisfaction. Only among caregivers with low social support was cognitive dysfunction adversely related to life satisfaction. Similarly, a trend suggested that patient unawareness of deficit was associated with caregiver life dissatisfaction only among caregivers with low social support. In contrast, these characteristics were unrelated to life satisfaction among caregivers with adequate social support.

  10. Examining the Reliability and Validity of the Effective Behavior Support Self-Assessment Survey

    Science.gov (United States)

    Solomon, Benjamin G.; Tobin, Kevin G.; Schutte, Gregory M.

    2015-01-01

    The Effective Behavior Support Self-Assessment Survey (SAS; Sugai, Horner, & Todd, 2003) is designed to measure perceived Positive Behavior Interventions and Supports (PBIS) implementation and identify priorities for improvement. Despite its longevity, little published research exists documenting its reliability or validity for these purposes.…

  11. Monte Carlo simulation - a powerful tool to support experimental activities in structure reliability

    International Nuclear Information System (INIS)

    Yuritzinn, T.; Chapuliot, S.; Eid, M.; Masson, R.; Dahl, A.; Moinereau, D.

    2003-01-01

    Monte-Carlo Simulation (MCS) can have different uses in supporting structure reliability investigations and assessments. In this paper we focus our interest on the use of MCS as a numerical tool to support the fitting of the experimental data related to toughness experiments. (authors)

  12. Measuring participation of social-support clients: : validity and reliability of IPA-MO

    NARCIS (Netherlands)

    Berenschot, L.; Grift, Y.K.

    2017-01-01

    This study evaluates the reliability and validity of the Impact on Autonomy and Participation instrument (IPA) for heterogeneous populations of social support clients. Decentralisation of social support and accompanying budget cuts spurred interest in outcome-related payment systems to foster

  13. Reliability of the Life Satisfaction Questionnaire to assess patients with chronic musculoskeletal pain

    NARCIS (Netherlands)

    Boonstra, Anne M.; Reneman, Michiel F.; Posthumus, Jitze B.; Stewart, Roy E.; Schiphorst Preuper, Henrica R.

    The aim of this study was to determine the reliability of the Life Satisfaction Questionnaire, Dutch version (LSQ-DV), to assess chronic pain patients. The study was designed as test-retest. The setting was the general rehabilitation centre. There were 51 patients over 18 years of age, suffering

  14. Accelerated life testing and reliability of high K multilayer ceramic capacitors

    Science.gov (United States)

    Minford, W. J.

    1981-01-01

    The reliability of one lot of high K multilayer ceramic capacitors was evaluated using accelerated life testing. The degradation in insulation resistance was characterized as a function of voltage and temperature. The times to failure at a voltage-temperature stress conformed to a lognormal distribution with a standard deviation approximately 0.5.

  15. Validity and reliability of the novel thyroid-specific quality of life questionnaire, ThyPRO

    DEFF Research Database (Denmark)

    Watt, Torquil; Hegedus, Laszlo; Grønvold, Mogens

    2010-01-01

    Appropriate scale validity and internal consistency reliability have recently been documented for the new thyroid-specific quality of life (QoL) patient-reported outcome (PRO) measure for benign thyroid disorders, the ThyPRO. However, before clinical use, clinical validity and test...

  16. Reliability testing of the Danish version of the Kidney Disease Quality of Life Short Form

    DEFF Research Database (Denmark)

    Molsted, Stig; Heaf, James; Prescott, Lotte

    2005-01-01

    . MATERIAL AND METHODS: Translation into Danish and back-translation into English were performed. Pilot, field and internal consistency reliability tests were performed. RESULTS: Cronbach's alpha coefficients for the internal reliability test ranged from 0.77 to 0.93 for the eight generic scales. In a test......OBJECTIVE: The questionnaire Kidney Disease Quality of Life Short Form version 1.3 (KDQOL-SF) is valuable for assessing the health-related quality of life in patients treated with chronic dialysis. The aim of this study was to translate and test the reliability of the KDQOL-SF for use in Denmark...... involving all patients, two of the disease-specific scales had Cronbach's alpha coefficients of test of the scores...

  17. Pediatric advanced life support and sedation of pediatric dental patients.

    Science.gov (United States)

    Kim, Jongbin

    2016-03-01

    Programs provided by the Korea Association of Cardiopulmonary Resuscitation include Basic Life Support (BLS), Advanced Cardiac Life Support (ACLS), Pediatric Advanced Life Support (PALS), and Korean Advanced Life Support (KALS). However, programs pertinent to dental care are lacking. Since 2015, related organizations have been attempting to develop a Dental Advanced Life Support (DALS) program, which can meet the needs of the dental environment. Generally, for initial management of emergency situations, basic life support is most important. However, emergencies in young children mostly involve breathing. Therefore, physicians who treat pediatric dental patients should learn PALS. It is necessary for the physician to regularly renew training every two years to be able to immediately implement professional skills in emergency situations. In order to manage emergency situations in the pediatric dental clinic, respiratory support is most important. Therefore, mastering professional PALS, which includes respiratory care and core cases, particularly upper airway obstruction and respiratory depression caused by a respiratory control problem, would be highly desirable for a physician who treats pediatric dental patients. Regular training and renewal training every two years is absolutely necessary to be able to immediately implement professional skills in emergency situations.

  18. A Study on the Storage Reliability of LSINS Based on Step-stress Accelerated Life Test

    Directory of Open Access Journals (Sweden)

    Teng Fei

    2015-01-01

    Full Text Available Based on the step-stress accelerated life test and the laser strap-down inertial navigation system, this paper studies the accelerated life model and the test method, provides the likelihood function, the likelihood equation and the two-order derivative when the stress level is k, evaluates the effectiveness of the method with the simulation test model established by MATLAB, applies the research findings in the storage reliability study of the XX laser strap-down inertial navigation system, and puts forward an effective evaluation method of the storage life of the inertial navigation system.

  19. Using reliability analysis to support decision making\\ud in phased mission systems

    OpenAIRE

    Zhang, Yang; Prescott, Darren

    2017-01-01

    Due to the environments in which they will operate, future autonomous systems must be capable of reconfiguring quickly and safely following faults or environmental changes. Past research has shown how, by considering autonomous systems to perform phased missions, reliability analysis can support decision making by allowing comparison of the probability of success of different missions following reconfiguration. Binary Decision Diagrams (BDDs) offer fast, accurate reliability analysis that cou...

  20. Validity and reliability of the novel thyroid-specific quality of life questionnaire, ThyPRO

    DEFF Research Database (Denmark)

    Watt, Torquil; Hegedüs, Laszlo; Groenvold, Mogens

    2010-01-01

    Background Appropriate scale validity and internal consistency reliability have recently been documented for the new thyroid-specific quality of life (QoL) patient-reported outcome (PRO) measure for benign thyroid disorders, the ThyPRO. However, before clinical use, clinical validity and test......-retest reliability should be evaluated. Aim To investigate clinical ('known-groups') validity and test-retest reliability of the Danish version of the ThyPRO. Methods For each of the 13 ThyPRO scales, we defined groups expected to have high versus low scores ('known-groups'). The clinical validity (known......-groups validity) was evaluated by whether the ThyPRO scales could detect expected differences in a cross-sectional study of 907 thyroid patients. Test-retest reliability was evaluated by intra-class correlations of two responses to the ThyPRO 2 weeks apart in a subsample of 87 stable patients. Results On all 13...

  1. Life Course Stage and Social Support Mobilization for End-of-Life Caregivers.

    Science.gov (United States)

    LaValley, Susan A; Gage-Bouchard, Elizabeth A

    2018-04-01

    Caregivers of terminally ill patients are at risk for anxiety, depression, and social isolation. Social support from friends, family members, neighbors, and health care professionals can potentially prevent or mitigate caregiver strain. While previous research documents the importance of social support in helping end-of-life caregivers cope with caregiving demands, little is known about differences in social support experiences among caregivers at different life course stages. Using life course theory, this study analyzes data from in-depth interviews with 50 caregivers of patients enrolled in hospice services to compare barriers to mobilizing social support among caregivers at two life course stages: midlife caregivers caring for parents and older adult caregivers caring for spouses/partners. Older adult caregivers reported different barriers to mobilizing social support compared with midlife caregivers. Findings enhance the understanding of how caregivers' life course stage affects their barriers to mobilization of social support resources.

  2. What influences parents' decisions to limit or withdraw life support?

    Science.gov (United States)

    Sharman, Mahesh; Meert, Kathleen L; Sarnaik, Ashok P

    2005-09-01

    Decisions to forgo life support from critically ill children are commonly faced by parents and physicians. Previous research regarding parents' perspectives on the decision-making process has been limited by retrospective methods and the use of closed-ended questionnaires. We prospectively identified and described parents' self-reported influences on decisions to forgo life support from their children. Deeper understanding of parents' views will allow physicians to focus end-of-life discussions on factors important to parents and help resolve conflicts. Prospective, qualitative pilot study. Pediatric intensive care unit of a university-affiliated children's hospital. A total of 14 parents of ten children whose pediatric intensive care unit physician had made a recommendation to limit or withdraw life support. : In-depth, semistructured interviews were conducted with parents during their decision-making process. Factors influencing the parents in this study in their decision to forgo life support included their previous experience with death and end-of-life decision making for others, their personal observations of their child's suffering, their perceptions of their child's will to survive, their need to protect and advocate for their child, and the family's financial resources and concerns regarding life-long care. Parents in this study expressed the desire to do what is best for their child but struggled with feelings of selfishness, guilt, and the need to avoid agony and sorrow. Physician recommendations, review of options, and joint formulation of a plan helped parents gain a sense of control over their situation. Parents of eight children agreed to forgo life support and parents of two did not. Prospective interviews with open-ended questions identified factors influencing parents' decision making not previously described in the critical care literature such as parents' past experiences with end-of-life decisions and their anticipated emotional adjustments and

  3. Ionic Liquids Enabling Revolutionary Closed-Loop Life Support

    Data.gov (United States)

    National Aeronautics and Space Administration — The innovation is to utilize ionic liquids with the Bosch process to achieve closed-loop life support. Specific tasks are to: 1) Advance the technology readiness of...

  4. Life Support Systems: Trace Contaminant and Particulate Control

    Data.gov (United States)

    National Aeronautics and Space Administration — Advanced Exploration Systems (AES) Life Support Systems project Trace Contaminant and Particulate Control task: Work in the area of trace contamination and...

  5. Improving basic life support training for medical students.

    Science.gov (United States)

    Lami, Mariam; Nair, Pooja; Gadhvi, Karishma

    2016-01-01

    Questions have been raised about basic life support (BLS) training in medical education. This article addresses the research evidence behind why BLS training is inadequate and suggests recommendations for improving BLS training for medical students.

  6. Novel Composite Membrane for Space Life Supporting System, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — Space life-supporting systems require effective removal of metabolic CO2 from the cabin atmosphere with minimal loss of O2. Conventional techniques, using either...

  7. Effective work-life balance support for various household structures

    NARCIS (Netherlands)

    Brummelhuis, L.L. ten; Lippe, T. van der

    2010-01-01

    Today’s workforce encompasses a wide variety of employees with specifi c needs and resources when it comes to balancing work and life roles. Our study explores whether various types of work-life balance support measures improve employee helping behavior and performance among single employees,

  8. Precursor life science experiments and closed life support systems on the Moon

    Science.gov (United States)

    Rodriguez, A.; Paille, C.; Rebeyre, P.; Lamaze, B.; Lobo, M.; Lasseur, C.

    Nowadays the Moon is not only a scientific exploration target but also potentially also a launch pad for deeper space exploration. Establishing an extended human presence on the Moon could reduce the cost of further space exploration, and gather the technical and scientific experience that would make possible the next steps of space exploration, namely manned-missions to Mars. To enable the establishment of such a Moon base, a reliable and regenerative life support system (LSS) is required: without any recycling of metabolic consumables (oxygen, water and food), a 6-person crew during the course of one year would require a supply of 12t from Earth (not including water for hygiene purposes), with a prohibitive associated cost! The recycling of consumables is therefore mandatory for a combination of economic, logistical and also safety reasons. Currently the main regenerative technologies used, namely water recycling in the ISS, are physical-chemical but they do not solve the issue of food production. In the European Space Agency, for the last 15 years, studies are being performed on several life support topics, namely in air revitalisation, food, water and waste management, contaminants, monitoring and control. Ground demonstration, namely the MELiSSA Pilot Plant and Concordia Station, and simulation studies demonstrated the studies feasibility and the recycling levels are promising. To be able to build LSS in a Moon base, the temperature amplitude, the dust and its 14-day night, which limits solar power supply, should be regarded. To reduce these technical difficulties, a landing site should be carefully chosen. Considering the requirements of a mission to the Moon and within the Aurora programme phase I, a preliminary configuration for a regenerative LSS can be proposed as an experiment for a precursor mission to the Moon. An overview of the necessary LSS to a Moon base will be presented, identifying Moon?s specific requirements and showing preliminary

  9. Cost-effectiveness of combustion turbines: recommendations for reliability, maintainability, supportability and maintenance requirements

    Energy Technology Data Exchange (ETDEWEB)

    Meuwisse, C.; Despujols, A. [Electricite de France, Research and Development Division, Chatou (France); Givaudan, B. [Electricite de France, Research and Development Division - SEPTEN, Villeurbanne (France); Lafage, L. [Electricite de France, Engineering and Construction Division - CNET, Paris (France)

    1998-12-31

    The profitability of combustion turbines intended for export is of extreme importance for Electricite de France. It is principally during the development phase of a project that one can ensure resect of two indissociable factors, essential to the per-kWh production cost: global operating costs and performance in terms of reliability and availability. The approach proposed here advocates the global acquisition of the installation and its logistic support. Generally applicable recommendations are given. They enable integrating in the future plant specifications all requirements relative to plant reliability, availability, maintainability and logistic support. They are structured according to type: expression of needs and management factors. (orig.) 4 refs.

  10. Cost-effectiveness of combustion turbines: recommendations for reliability, maintainability, supportability and maintenance requirements

    Energy Technology Data Exchange (ETDEWEB)

    Meuwisse, C; Despujols, A [Electricite de France, Research and Development Division, Chatou (France); Givaudan, B [Electricite de France, Research and Development Division - SEPTEN, Villeurbanne (France); Lafage, L [Electricite de France, Engineering and Construction Division - CNET, Paris (France)

    1999-12-31

    The profitability of combustion turbines intended for export is of extreme importance for Electricite de France. It is principally during the development phase of a project that one can ensure resect of two indissociable factors, essential to the per-kWh production cost: global operating costs and performance in terms of reliability and availability. The approach proposed here advocates the global acquisition of the installation and its logistic support. Generally applicable recommendations are given. They enable integrating in the future plant specifications all requirements relative to plant reliability, availability, maintainability and logistic support. They are structured according to type: expression of needs and management factors. (orig.) 4 refs.

  11. Remaining life prediction of I and C cables for reliability assessment of NPP systems

    International Nuclear Information System (INIS)

    Santhosh, T.V.; Ghosh, A.K.; Fernandes, B.G.

    2012-01-01

    Highlights: ► A framework for time dependent reliability prediction of I and C cables for use in PSA of NPP has been developed using stress–strength interference theory. ► The proposed methodology has been illustrated with the accelerated thermal aging data on a typical XLPE cable. ► The behavior of insulation resistance when the degradation process is linear or exponential has also been modeled. ► The reliability index or probability of failure obtained from this approach can be used in system reliability evaluation to account for cable aging for PSA of NPP. - Abstract: Instrumentation and control (I and C) cables are one of the most important components in nuclear power plants (NPPs) because they provide power to safety-related equipment and also to transmit signals to and from various controllers to perform safety operations. I and C cables in NPP are subjected to a variety of aging and degradation stressors that can produce immediate degradation or aging-related mechanisms causing the degradation of cable components over time. Although, there exits several life estimation techniques, currently there is no any standard methodology or an approach toward estimating the time dependent reliability of I and C cables that can be directly used in probabilistic safety assessment (PSA) applications. Hence, the objective of this study is to develop an approach to estimate and confirm the continued acceptable margin in cable insulation life over time subjected to aging. This paper presents a framework based on the structural reliability theory to quantify the life time of I and C cable subjecting to thermal aging. Since cross-linked polyethylene (XLPE) cables are extensively being used in Indian NPPs, the remaining life time evaluations have been carried out for a typical XLPE cable. However, the methodology can be extended to other cables such as polyvinyl chloride (PVC), ethylene propylene rubber (EPR), etc.

  12. Space Shuttle Rudder Speed Brake Actuator-A Case Study Probabilistic Fatigue Life and Reliability Analysis

    Science.gov (United States)

    Oswald, Fred B.; Savage, Michael; Zaretsky, Erwin V.

    2015-01-01

    The U.S. Space Shuttle fleet was originally intended to have a life of 100 flights for each vehicle, lasting over a 10-year period, with minimal scheduled maintenance or inspection. The first space shuttle flight was that of the Space Shuttle Columbia (OV-102), launched April 12, 1981. The disaster that destroyed Columbia occurred on its 28th flight, February 1, 2003, nearly 22 years after its first launch. In order to minimize risk of losing another Space Shuttle, a probabilistic life and reliability analysis was conducted for the Space Shuttle rudder/speed brake actuators to determine the number of flights the actuators could sustain. A life and reliability assessment of the actuator gears was performed in two stages: a contact stress fatigue model and a gear tooth bending fatigue model. For the contact stress analysis, the Lundberg-Palmgren bearing life theory was expanded to include gear-surface pitting for the actuator as a system. The mission spectrum of the Space Shuttle rudder/speed brake actuator was combined into equivalent effective hinge moment loads including an actuator input preload for the contact stress fatigue and tooth bending fatigue models. Gear system reliabilities are reported for both models and their combination. Reliability of the actuator bearings was analyzed separately, based on data provided by the actuator manufacturer. As a result of the analysis, the reliability of one half of a single actuator was calculated to be 98.6 percent for 12 flights. Accordingly, each actuator was subsequently limited to 12 flights before removal from service in the Space Shuttle.

  13. IT logistics support life cycle of products in air engine

    Directory of Open Access Journals (Sweden)

    М.С. Кулик

    2009-02-01

    Full Text Available  Questions of increase of efficiency of a supply with information of creation and support in operation of modern aviation engines are considered. The revealed most perspective directions of development of complex systems of support of life cycle aviation technics.

  14. Improved Reliability-Based Optimization with Support Vector Machines and Its Application in Aircraft Wing Design

    Directory of Open Access Journals (Sweden)

    Yu Wang

    2015-01-01

    Full Text Available A new reliability-based design optimization (RBDO method based on support vector machines (SVM and the Most Probable Point (MPP is proposed in this work. SVM is used to create a surrogate model of the limit-state function at the MPP with the gradient information in the reliability analysis. This guarantees that the surrogate model not only passes through the MPP but also is tangent to the limit-state function at the MPP. Then, importance sampling (IS is used to calculate the probability of failure based on the surrogate model. This treatment significantly improves the accuracy of reliability analysis. For RBDO, the Sequential Optimization and Reliability Assessment (SORA is employed as well, which decouples deterministic optimization from the reliability analysis. The improved SVM-based reliability analysis is used to amend the error from linear approximation for limit-state function in SORA. A mathematical example and a simplified aircraft wing design demonstrate that the improved SVM-based reliability analysis is more accurate than FORM and needs less training points than the Monte Carlo simulation and that the proposed optimization strategy is efficient.

  15. Life Support Goals Including High Closure and Low Mass Should Be Reconsidered Using Systems Analysis

    Science.gov (United States)

    Jones, Harry W.

    2017-01-01

    Recycling space life support systems have been built and tested since the 1960s and have operated on the International Space Station (ISS) since the mid 2000s. The development of space life support has been guided by a general consensus focused on two important related goals, increasing system closure and reducing launch mass. High closure is achieved by recycling crew waste products such as carbon dioxide and condensed humidity. Recycling directly reduces the mass of oxygen and water for the crew that must be launched from Earth. The launch mass of life support can be further reduced by developing recycling systems with lower hardware mass and reduced power. The life support consensus has also favored using biological systems. The goal of increasing closure using biological systems suggests that food should be grown in space and that biological processors be used for air, water, and waste recycling. The goal of reducing launch mass led to use of Equivalent System Mass (ESM) in life support advocacy and technology selection. The recent consensus assumes that the recycling systems architecture developed in the 1960s and implemented on ISS will be used on all future long missions. NASA and other project organizations use the standard systems engineering process to guide hardware development. The systems process was used to develop ISS life support, but it has been less emphasized in planning future systems for the moon and Mars. Since such missions are far in the future, there has been less immediate need for systems engineering analysis to consider trade-offs, reliability, and Life Cycle Cost (LCC). Preliminary systems analysis suggests that the life support consensus concepts should be revised to reflect systems engineering requirements.

  16. Robotics in a controlled, ecological life support system

    Science.gov (United States)

    Miles, Gaines E.; Krom, Kimberly J.

    1993-01-01

    Controlled, Ecological Life Support Systems (CELSS) that utilize plants to provide food, water and oxygen could consume considerable amounts of labor unless crop production, recovery and processing are automated. Robotic manipulators equipped with special end-effectors and programmed to perform the sensing and materials handling tasks would minimize the amount of astronaut labor required. The Human Rated Test Facility (HRTF) planned for Johnson Space Center could discover and demonstrate techniques of crop production which can be reliably integrated with machinery to minimize labor requirements. Before the physical components (shelves, lighting fixtures, etc.) can be selected, a systems analysis must be performed to determine which alternative processes should be followed and how the materials handling tasks should be automated. Given that the current procedures used to grow crops in a CELSS may not be the best methods to automate, then what are the alternatives? How may plants be grown, harvested, processed for food, and the inedible components recycled? What commercial technologies current exist? What research efforts are underway to develop new technologies which might satisfy the need for automation in a CELSS? The answers to these questions should prove enlightening and provide some of the information necessary to perform the systems analysis. The planting, culturing, gathering, threshing and separation, food processing, and recovery of inedible portions of wheat were studied. The basic biological and materials handling processes of each task are defined and discussed. Current practices at Johnson Space Center and other NASA centers are described and compared to common production practices in the plant production industry. Technologies currently being researched which might be applicable are identified and illustrated. Finally, based on this knowledge, several scenarios are proposed for automating the tasks for wheat.

  17. Evaluating validity and reliability of Persian version of Supports Intensity Scale in adults with intellectual disability

    Directory of Open Access Journals (Sweden)

    Shahin Soltani

    2013-12-01

    Full Text Available Background: Shifting paradigms regarding the ways to assess the support needs of people with intellectual disability in 1980 necessitates the design and development of appropriate tools more than ever. In this regard, American Association on Intellectual and Developmental Disabilities (AAIDD developed Supports Intensity Scale (SIS to respond the lack of an appropriate measurement tool. The aim of this study is the cultural adaptation and evaluation of psychometric properties of Supports Intensity Scale in adults with intellectual disability. Methods: Validity of Persian version of SIS was assessed by Content validity. The reliability of the scale was evaluated using Cronbach's alpha and test–retest reliability with a 3-week interval. In this study, the sample contained 43 adults (29 men and 14 women with intellectual disability. Results: The content of the Persian version of SIS was approved by the experts. The Cronbach's alpha reliability coefficients for the subscales ranged between 0.80 and 0.99. Also, Intraclass correlation coefficients ranged between 0.90 and 0.99 (P<0.001. Furthermore, all Pearson correlation coefficients among the SIS subscales ranged between 0.63 and 0.98 (P<0.01. Conclusion: The results of this study indicated that the validity and reliability of the equivalent Persian version of SIS for identifying pattern and required supports intensity in adults with intellectual disability is acceptable.

  18. Research on Life Science and Life Support Engineering Problems of Manned Deep Space Exploration Mission

    Science.gov (United States)

    Qi, Bin; Guo, Linli; Zhang, Zhixian

    2016-07-01

    Space life science and life support engineering are prominent problems in manned deep space exploration mission. Some typical problems are discussed in this paper, including long-term life support problem, physiological effect and defense of varying extraterrestrial environment. The causes of these problems are developed for these problems. To solve these problems, research on space life science and space medical-engineering should be conducted. In the aspect of space life science, the study of space gravity biology should focus on character of physiological effect in long term zero gravity, co-regulation of physiological systems, impact on stem cells in space, etc. The study of space radiation biology should focus on target effect and non-target effect of radiation, carcinogenicity of radiation, spread of radiation damage in life system, etc. The study of basic biology of space life support system should focus on theoretical basis and simulating mode of constructing the life support system, filtration and combination of species, regulation and optimization method of life support system, etc. In the aspect of space medical-engineering, the study of bio-regenerative life support technology should focus on plants cultivation technology, animal-protein production technology, waste treatment technology, etc. The study of varying gravity defense technology should focus on biological and medical measures to defend varying gravity effect, generation and evaluation of artificial gravity, etc. The study of extraterrestrial environment defense technology should focus on risk evaluation of radiation, monitoring and defending of radiation, compound prevention and removal technology of dust, etc. At last, a case of manned lunar base is analyzed, in which the effective schemes of life support system, defense of varying gravity, defense of extraterrestrial environment are advanced respectively. The points in this paper can be used as references for intensive study on key

  19. Assessing reliability and useful life of containers for disposal of irradiated fuel waste

    International Nuclear Information System (INIS)

    Doubt, G.

    1984-06-01

    Metal containers for fuel waste isolation are to be designed to last at least 500 years to provide a redundant barrier during the decay period of the high activity components of the waste. To meet the long-life requirement, containers must have a very low failure rate during the design mission, a low incidence of 'juvenile failures' due to undetected defects, and resistance to progressive deterioration from environmental processes. This paper summarizes studies to determine: (1) precedent for low failure rates and relevance to container longevity; (b) the likelihood of initial defects perforating the container before or shortly after emplacement, and estimates of material defect distribution; (c) the utility of reliability analysis techniques for estimating reliability and life of fuel waste containers; (d) other approaches to estimating container longevity and failure versus time distribution

  20. Life Cycle Management for Equipments in Nuclear Plants Based on Reliability

    International Nuclear Information System (INIS)

    Wang Dalin; Sun Jinlong

    2012-01-01

    Life cycle management model based on reliability includes two parts: obtaining failure rate function and founding cost-oriented model to solve. It is actually a single objective programming whose optimal solution is the most economical replacement period. Parameters of failure rate function are estimated by Weibull process fitting with the method of maximum likelihood. The objective function of the model is life-cost function where the dependent variable is replacement period T, with the constraints of failure rate or availability. After foundation of LCM model, we solve it to find the optimal replacement period for the equipments. (author)

  1. Life cycle management for equipments in nuclear plants based on reliability and actual conditions

    International Nuclear Information System (INIS)

    Dalin, Wang; Jingquan, Liu; Peng, Liu

    2010-01-01

    Life cycle management model based on reliability includes two parts: obtaining failure rate function and founding cost-oriented model to solve. It is actually a single objective programming whose optimal solution is the most economical replacement period. Parameters of failure rate function are estimated by Weibull process fitting with the method of maximum likelihood. The objective function of the model is life-cost function where the dependent variable is replacement period T, with the constraints of failure rate or availability. After foundation of LCM model, we solve it to find the optimal replacement period for the equipments. (authors)

  2. Reliable tool life measurements in turning - an application to cutting fluid efficiency evaluation

    DEFF Research Database (Denmark)

    Axinte, Dragos A.; Belluco, Walter; De Chiffre, Leonardo

    2001-01-01

    The paper proposes a method to obtain reliable measurements of tool life in turning, discussing some aspects related to experimental procedure and measurement accuracy. The method (i) allows and experimental determination of the extended Taylor's equation, with a limited set of experiments and (ii......) provides efficiency evaluation. Six cutting oils, five of which formulated from vegetable basestock, were evaluated in turning. Experiments were run in a range of cutting parameters. according to a 2, 3-1 factorial design, machining AISI 316L stainless steel with coated carbide tools. Tool life...

  3. Reliability and Validity of the Multidimensional Scale of Life Skills in Late Childhood

    Directory of Open Access Journals (Sweden)

    Minoru Takakura

    2013-04-01

    Full Text Available This study investigated the reliability and validity of the Multidimensional Scale of Life Skills in Late Childhood, an instrument designed to measure a concept similar to “zest for living” in late childhood. A total of 1,888 elementary school students in the 4th, 5th, and 6th grades residing in urban and suburban areas as well as in remote islands of 3 prefectures (Okinawa, Kagoshima, and Nagasaki were surveyed. On the basis of our analysis, 24 items and seven factors were extracted. These factors are problem-solving/synthesis, relationship with friends, personal manners, decision-making and future planning, self-learning, collecting and using information, and leadership. Cronbach’s alpha reliability coefficients were computed for each subscale and ranged from 0.71 to 0.87. Test-retest reliability coefficient values ranged from 0.68 to 0.79. To examine the construct validity of the scales, a goodness-of-fit model was determined by confirmatory factor analysis, and satisfactory values were found (GFI = 0.952, AGFI = 0.937, CFI = 0.966, RMSEA = 0.016. The validity of the goodness-of-fit model and the reliability of the scales indicate that the Multidimensional Scale of Life Skills in Late Childhood is an effective assessment tool.

  4. Integrated Life Cycle Management: A Strategy for Plants to Extend Operating Lifetimes Safely with High Operational Reliability

    International Nuclear Information System (INIS)

    Esselman, Thomas; Bruck, Paul; Mengers, Charles

    2012-01-01

    Nuclear plant operators are studying the possibility of extending their existing generating facilities operating lifetime to 60 years and beyond. Many nuclear plants have been granted licenses to operate their facilities beyond the original 40 year term; however, in order to optimize the long term operating strategies, plant decision-makers need a consistent approach to support their options. This paper proposes a standard methodology to support effective decision-making for the long-term management of selected station assets. Methods detailed are intended to be used by nuclear plant site management, equipment reliability personnel, long term planners, capital asset planners, license renewal staff, and others that intend to look at operation between the current time and the end of operation. This methodology, named Integrated Life Cycle Management (ILCM), will provide a technical basis to assist decision makers regarding the timing of large capital investments required to get to the end of operation safely and with high plant reliability. ILCM seeks to identify end of life cycle failure probabilities for individual plant large capital assets and attendant costs associated with their refurbishment or replacement. It will provide a standard basis for evaluation of replacement and refurbishment options for these components. ILCM will also develop methods to integrate the individual assets over the entire plant thus assisting nuclear plant decision-makers in their facility long term operating strategies. (author)

  5. Failure and reliability prediction by support vector machines regression of time series data

    International Nuclear Information System (INIS)

    Chagas Moura, Marcio das; Zio, Enrico; Lins, Isis Didier; Droguett, Enrique

    2011-01-01

    Support Vector Machines (SVMs) are kernel-based learning methods, which have been successfully adopted for regression problems. However, their use in reliability applications has not been widely explored. In this paper, a comparative analysis is presented in order to evaluate the SVM effectiveness in forecasting time-to-failure and reliability of engineered components based on time series data. The performance on literature case studies of SVM regression is measured against other advanced learning methods such as the Radial Basis Function, the traditional MultiLayer Perceptron model, Box-Jenkins autoregressive-integrated-moving average and the Infinite Impulse Response Locally Recurrent Neural Networks. The comparison shows that in the analyzed cases, SVM outperforms or is comparable to other techniques. - Highlights: → Realistic modeling of reliability demands complex mathematical formulations. → SVM is proper when the relation input/output is unknown or very costly to be obtained. → Results indicate the potential of SVM for reliability time series prediction. → Reliability estimates support the establishment of adequate maintenance strategies.

  6. Effective work-life balance support for various household structures

    OpenAIRE

    Brummelhuis, L.L. ten; Lippe, T. van der

    2010-01-01

    Today’s workforce encompasses a wide variety of employees with specifi c needs and resources when it comes to balancing work and life roles. Our study explores whether various types of work-life balance support measures improve employee helping behavior and performance among single employees, employees with a partner, and employees with a partner and children. Using a sample of 482 employees at 24 organizations, the results showed that the organization’s work-family culture improved work perf...

  7. Development of Chinese Military Personnel Social Support Scale and tests for its reliability and validity

    Directory of Open Access Journals (Sweden)

    Kai-hong TANG

    2013-01-01

    Full Text Available Objective  To develop Chinese Military Personnel Social Support Scaleand verify its reliability and validity. Methods  The Chinese Military Personnel Social Support Scalewas initiated, organized and compiled based upon open-ended questionnaire survey done in a systematic manner, and previous researches were taken as references. A total of 630 military personnel were chosen by random cluster sampling and tested with the Scale, among them 50 were tested with Social Support Rating Scale(SSRS and Chinese Military Psychosomatic Health Scale(CMPHS simultaneously, and the test was done solely a second time with CMPHS 2 weeks later. The reliability and validity were assessed and verified by exploratory factor analysis, confirmatory factor analysis and correlation analysis. Results  The Chinese Military Personnel Social Support Scalecomprised three factors, namely subjective support, objective support and utility of social support. Eighteen items were left in official scale after amendment by factor analysis, and one lying subscale was added. The correlation coefficients between the public factors ranged from 0.477 to 0.589 (P<0.01, and the correlation coefficients between factors and total scale ranged from 0.721 to 0.823 (P<0.01. The test-retest correlation coefficients of total scale and subscales ranged from 0.622 to 0.803 (P<0.01, the Cronbach α coefficients ranged from 0.624 to 0.874, and the split-half correlation coefficients ranged from 0.551 to 0.828. Significant correlation existed between this Scale and two criterion scales, namely SSRS and CMPHS. Conclusion  It is verified that the Chinese Military Personnel Social Support Scalehas excellent reliability and validity, and complying with psychometric standards, it may be used to evaluate the social support level of Chinese military personnel.

  8. Revisiting Frequency Reuse towards Supporting Ultra-Reliable Ubiquitous-Rate Communication

    DEFF Research Database (Denmark)

    Park, Jihong; Kim, Dong Min; Popovski, Petar

    2017-01-01

    One of the goals of 5G wireless systems stated by the NGMN alliance is to provide moderate rates (50+ Mbps) everywhere and with very high reliability. We term this service Ultra-Reliable Ubiquitous-Rate Communication (UR2C). This paper investigates the role of frequency reuse in supporting UR2C...... in the downlink. To this end, two frequency reuse schemes are considered: user-specific frequency reuse (FRu) and BS-specific frequency reuse (FRb). For a given unit frequency channel, FRu reduces the number of serving user equipments (UEs), whereas FRb directly decreases the number of interfering base stations...

  9. Reliability and validity of a physical activity social support assessment scale in adolescents - ASAFA Scale

    Directory of Open Access Journals (Sweden)

    José Cazuza de Farias Júnior

    2014-06-01

    Full Text Available Objective: To analyze the reliability and validity of a scale used to measure social support for physical activity in adolescents - ASAFA Scale. Methods: This study included 2,755 adolescents (57.6% girls, 16.5 ± 1.2 years of age, from Joao Pessoa, Paraiba, Brazil. Initially, the scale was consisted of 12 items (6 for social support from parents and 6 from friends. The reliability of the scale was estimated by Cronbach's alpha coefficient (α, by the Composite Reliability (CR, and by the model with two factors and factorial invariance by Confirmatory Factor Analysis (CFA adequacy. Results: The CFA results confirmed that the social support scale contained two factors (factor 1: social support from parents; factor 2: social support from friends with five items each (one item was excluded from each scale, all with high factor loadings (> 0.65 and acceptable adjustment indexes (RMR = 0.050; RMSEA = 0.063; 90%CI: 0.060 - 0.067; AGFI = 0.903; GFI = 0.940; CFI = 0.934, NNFI = 0.932. The internal consistency was satisfactory (parents: α ≥ 0.77 and CR ≥ 0.83; friends: α ≥ 0.87 and CR ≥ 0.91. The scale's factorial invariance was confirmed (p > 0.05; Δχ2 and ΔCFI ≤ 0.01 across all subgroups analyzed (gender, age, economic class. The construct validity was evidenced by the significant association (p < 0.05 between the adolescents physical activity level and the social support score of parents (rho = 0.29 and friends (rho = 0.39. Conclusions: The scale showed reliability, factorial invariance and satisfactory validity, so it can be used in studies with adolescents.

  10. [Habitability and biological life support systems for man].

    Science.gov (United States)

    Gazenko, O G; Grigor'ev, A I; Meleshko, G I; Shepelev, E Ia

    1990-01-01

    This paper discusses general concepts and specific details of the habitability of space stations and planetary bases completely isolated from the Earth for long periods of time. It emphasizes inadequacy of the present-day knowledge about natural conditions that provide a biologically acceptable environment on the Earth as well as lack of information about life support systems as a source of consumables (oxygen, water, food) and a tool for waste management. The habitability of advanced space vehicles is closely related to closed bioregenerative systems used as life support systems.

  11. Canadian advanced life support capacities and future directions

    Science.gov (United States)

    Bamsey, M.; Graham, T.; Stasiak, M.; Berinstain, A.; Scott, A.; Vuk, T. Rondeau; Dixon, M.

    2009-07-01

    Canada began research on space-relevant biological life support systems in the early 1990s. Since that time Canadian capabilities have grown tremendously, placing Canada among the emerging leaders in biological life support systems. The rapid growth of Canadian expertise has been the result of several factors including a large and technically sophisticated greenhouse sector which successfully operates under challenging climatic conditions, well planned technology transfer strategies between the academic and industrial sectors, and a strong emphasis on international research collaborations. Recent activities such as Canada's contribution of the Higher Plant Compartment of the European Space Agency's MELiSSA Pilot Plant and the remote operation of the Arthur Clarke Mars Greenhouse in the Canadian High Arctic continue to demonstrate Canadian capabilities with direct applicability to advanced life support systems. There is also a significant latent potential within Canadian institutions and organizations with respect to directly applicable advanced life support technologies. These directly applicable research interests include such areas as horticultural management strategies (for candidate crops), growth media, food processing, water management, atmosphere management, energy management, waste management, imaging, environment sensors, thermal control, lighting systems, robotics, command and data handling, communications systems, structures, in-situ resource utilization, space analogues and mission operations. With this background and in collaboration with the Canadian aerospace industry sector, a roadmap for future life support contributions is presented here. This roadmap targets an objective of at least 50% food closure by 2050 (providing greater closure in oxygen, water recycling and carbon dioxide uptake). The Canadian advanced life support community has chosen to focus on lunar surface infrastructure and not low Earth orbit or transit systems (i.e. microgravity

  12. Reliability and validity of the Malay translated version of diabetes quality of life for youth questionnaire

    Directory of Open Access Journals (Sweden)

    Jamaiyah H

    2013-05-01

    Full Text Available Introduction: Many studies reported poorer quality of life (QoL in youth with diabetes compared to healthy peers. One of the tools used is the Diabetes Quality of Life for Youth (DQoLY questionnaire in English. A validated instrument in Malay is needed to assess the perception of QoL among youth with diabetes in Malaysia. Objective: To translate the modified version, i.e., the DQoLY questionnaire,into Malay and determine its reliability and validity.Methods: Translation and back-translation were used. An expert panel reviewed the translated version for conceptual and content equivalence. The final version was then administered to youths with type 1 diabetes mellitus from the universities and Ministry of Health hospitals between August 2006 and September 2007. Reliability was analysed using Cronbach’s alpha, while validity was confirmed using concurrent validity (HbA1c and self-rated health score.Results: A total of 82 youths with type 1 diabetes (38 males aged 10-18 years were enrolled from eight hospitals. The reliability of overall questionnaire was 0.917, and the reliabilities of the three domains ranged from 0.832 to 0.867. HbA1c was positively correlated with worry (p=0.03. The self-rated health score was found to have significant negative correlation with the “satisfaction” (p=0.013 and “impact” (p=0.007 domains.Conclusion: The Malay translated version of DQoLY questionnaire was reliable and valid to be used among youths with type 2 diabetes in Malaysia.

  13. A study on the reliability evaluation of shot peened aluminium alloy using accelerated life test

    International Nuclear Information System (INIS)

    Nam, Ji Hun; Cheong, Seong Kyun; Kang, Min Woo

    2006-01-01

    In this paper, the concept of accelerated life test, which is a popular research field nowadays, is applied to the shot peened material. To predict the efficient and exact room temperature fatigue characteristics from the high temperature fatigue data, the adequate accelerated model is investigated. Ono type rotary bending fatigue tester and high temperature chamber were used for the experiment. Room temperature fatigue lives were predicted by applying accelerated models and doing reliability evaluation. Room temperature fatigue tests were accomplished to check the effectiveness of predicted data and the adequate accelerated life test models were presented by considering errors. Experimental result using Arrhenius model, fatigue limit obtain almost 5.45% of error, inverse power law has about 1.36% of error, so we found that inverse power law is applied well to temperature-life relative of shot peended material

  14. Much Lower Launch Costs Make Resupply Cheaper than Recycling for Space Life Support

    Science.gov (United States)

    Jones, Harry W.

    2017-01-01

    The development of commercial launch vehicles by SpaceX has greatly reduced the cost of launching mass to Low Earth Orbit (LEO). Reusable launch vehicles may further reduce the launch cost per kilogram. The new low launch cost makes open loop life support much cheaper than before. Open loop systems resupply water and oxygen in tanks for crew use and provide disposable lithium hydroxide (LiOH) in canisters to remove carbon dioxide. Short human space missions such as Apollo and shuttle have used open loop life support, but the long duration International Space Station (ISS) recycles water and oxygen and removes carbon dioxide with a regenerative molecular sieve. These ISS regenerative and recycling life support systems have significantly reduced the total launch mass needed for life support. But, since the development cost of recycling systems is much higher than the cost of tanks and canisters, the relative cost savings have been much less than the launch mass savings. The Life Cycle Cost (LCC) includes development, launch, and operations. If another space station was built in LEO, resupply life support would be much cheaper than the current recycling systems. The mission most favorable to recycling would be a long term lunar base, since the resupply mass would be large, the proximity to Earth would reduce the need for recycling reliability and spares, and the launch cost would be much higher than for LEO due to the need for lunar transit and descent propulsion systems. For a ten-year lunar base, the new low launch costs make resupply cheaper than recycling systems similar to ISS life support.

  15. Forecasting systems reliability based on support vector regression with genetic algorithms

    International Nuclear Information System (INIS)

    Chen, K.-Y.

    2007-01-01

    This study applies a novel neural-network technique, support vector regression (SVR), to forecast reliability in engine systems. The aim of this study is to examine the feasibility of SVR in systems reliability prediction by comparing it with the existing neural-network approaches and the autoregressive integrated moving average (ARIMA) model. To build an effective SVR model, SVR's parameters must be set carefully. This study proposes a novel approach, known as GA-SVR, which searches for SVR's optimal parameters using real-value genetic algorithms, and then adopts the optimal parameters to construct the SVR models. A real reliability data for 40 suits of turbochargers were employed as the data set. The experimental results demonstrate that SVR outperforms the existing neural-network approaches and the traditional ARIMA models based on the normalized root mean square error and mean absolute percentage error

  16. The prediction of reliability and residual life of reactor pressure components

    International Nuclear Information System (INIS)

    Nemec, J.; Antalovsky, S.

    1978-01-01

    The paper deals with the problem of PWR pressure components reliability and residual life evaluation and prediction. A physical model of damage cumulation which serves as a theoretical basis for all considerations presents two major aspects. The first one describes the dependence of the degree of damage in the crack leading-edge in pressure components on the reactor system load-time history, i.e. on the number of transient loads. Both stages, fatigue crack initiation and growth through the wall until the critical length is reached, are investigated. The crack is supposed to initiate at the flaws in a strength weld joint or in the bimetallic weld of the base ferritic steel and the austenitic stainless overlay cladding. The growth rates of developed cracks are analysed in respect to different load-time histories. Important cyclic properties of some steels are derived from the low-cycle fatigue theory. The second aspect is the load-time history-dependent process of precipitation, deformation and radiation aging, characterized entirely by the critical crack-length value mentioned above. The fracture point, defined by the equation ''crack-length=critical value'' and hence the residual life, can be evaluated using this model and verified by in-service inspection. The physical model described is randomized by considering all the parameters of the model as random. Monte Carlo methods are applied and fatigue crack initiation and growth is simulated. This permits evaluation of the reliability and residual life of the component. The distributions of material and load-time history parameters are needed for such simulation. Both the deterministic and computer-simulated probabilistic predictions of reliability and residual life are verified by prior-to-failure sequential testing of data coming from in-service NDT periodical inspections. (author)

  17. Reliability and Validity of the Turkish Version of the Voice-Related Quality of Life Measure.

    Science.gov (United States)

    Tezcaner, Zahide Çiler; Aksoy, Songül

    2017-03-01

    This study aims to test the validity and reliability of the Turkish version of the Voice-Related Quality of Life (V-RQOL) questionnaire. This is a nonrandomized, prospective study with control group. The questionnaire was administered to 249 individuals-130 with vocal complaint and 119 without-with a mean age of 37.8 ± 12.3 years. The Turkish version of the Voice Handicap Index (VHI) and perceptual voice evaluation measures were also administered at 2-14 days for retest reliability. The instrument was submitted to validity and reliability evaluation. The V-RQOL measure showed a strong internal consistency and test-retest reliability; the Cronbach's alpha coefficient for the overall V-RQOL was 0.969, the physical functioning domain was 0.949, and the social-emotional domain was 0.940. In the test-retest reliability test, the overall V-RQOL was found to be 0.989. The construct validity of the V-RQOL was determined based on the strength and direction of its relation to the VHI and the perceptual voice evaluation measure. The higher the VHI level, the lower the physical functioning, social-emotional, and overall score levels of the V-RQOL (r = -0.927, r = -0.912, r = -0.944, respectively; P reliability and validity and may play a crucial role in evaluating Turkish-speaking patients with voice disorders. Copyright © 2017 The Voice Foundation. Published by Elsevier Inc. All rights reserved.

  18. Crop candidates for the bioregenerative life support systems in China

    Science.gov (United States)

    Chunxiao, Xu; Hong, Liu

    The use of plants for life support applications in space is appealing because of the multiple life support functions by the plants. Research on crops that were grown in the life support system to provide food and oxygen, remove carbon dioxide was begun from 1960. To select possible crops for research on the bioregenerative life support systems in China, criteria for the selection of potential crops were made, and selection of crops was carried out based on these criteria. The results showed that 14 crops including 4 food crops (wheat, rice, soybean and peanut) and 7 vegetables (Chinese cabbage, lettuce, radish, carrot, tomato, squash and pepper) won higher scores. Wheat ( Triticum aestivum L.), rice ( Oryza sativa L.), soybean ( Glycine max L.) and peanut ( Arachis hypogaea L.) are main food crops in China. Chinese cabbage ( Brassica campestris L. ssp. chinensis var. communis), lettuce ( Lactuca sativa L. var. longifolia Lam.), radish ( Raphanus sativus L.), carrot ( Daucus carota L. var. sativa DC.), tomato ( Lycopersicon escalentum L.), squash ( Cucurbita moschata Duch.) and pepper ( Capsicum frutescens L. var. longum Bailey) are 7 vegetables preferred by Chinese. Furthermore, coriander ( Coriandum sativum L.), welsh onion ( Allium fistulosum L. var. giganteum Makino) and garlic ( Allium sativum L.) were selected as condiments to improve the taste of space crew. To each crop species, several cultivars were selected for further research according to their agronomic characteristics.

  19. Religiosity, Social Support, and Life Satisfaction among Elderly Korean Immigrants

    Science.gov (United States)

    Park, Jisung; Roh, Soonhee; Yeo, Younsook

    2012-01-01

    Purpose: The present study tested Smith's (2003. Theorizing religious effects among American adolescents. "Journal for the Scientific Study of Religion, 42", 17-30. doi:10.1111/1468-5906.t01-1-00158) theory of religious effects to explore the relationship of religiosity, social support, and life satisfaction among elderly Korean…

  20. Phase Change Permeation Technology For Environmental Control Life Support Systems

    Science.gov (United States)

    Wheeler, Raymond M.

    2014-01-01

    Use of a phase change permeation membrane (Dutyion [Trademark]) to passively and selectively mobilize water in microgravity to enable improved water recovery from urine/brine for Environment Control and Life Support Systems (ECLSS) and water delivery to plans for potential use in microgravity.

  1. Source apportionment of social support and quality of life index ...

    African Journals Online (AJOL)

    Source apportionment of social support and quality of life index among drug abuse inmates using multiple linear regression. ... The data from 12 prisons selected in Peninsular Malaysia was collected during the period April and June 2015. The 1753 respondents were selected using simple random sampling. The method of ...

  2. EPIC: Helping School Life and Family Support Each Other.

    Science.gov (United States)

    Montgomery, David

    1992-01-01

    Born out of a 1981 murder, Buffalo (New York) Public Schools' EPIC (Effective Parenting Information for Children) program successfully combines parenting, effective teaching, and community programs to help family and school life support each other. Under EPIC, teachers are advised to help students acquire 23 skills involving self-esteem, rules,…

  3. European top managers’ support for work-life arrangements

    NARCIS (Netherlands)

    Been, Wike M.; van der Lippe, Tanja; den Dulk, Laura; Das Dores Horta Guerreiro, Maria; Kanjuo Mrčela, Aleksandra; Niemistö, Charlotta

    2017-01-01

    Top managers—defined as CEOs, CFOs and members of boards of directors—decide to what degree their organization offers employees work-life arrangements. This study focuses on the conditions under which they support such arrangements. A factorial survey of 202 top managers in five European countries

  4. FileNet's BPM life-cycle support

    NARCIS (Netherlands)

    Netjes, M.; Reijers, H.A.; Aalst, van der W.M.P.

    2006-01-01

    Business Process Management (BPM) systems provide a broad range of facilities to enact and manage operational business processes. Ideally, these systems should provide support for the complete BPM life-cycle: (re)design, configuration, execution, control, and diagnosis of processes. In the research

  5. Pipeline integrity model-a formative approach towards reliability and life assessment

    International Nuclear Information System (INIS)

    Sayed, A.M.; Jaffery, M.A.

    2005-01-01

    Pipe forms an integral part of transmission medium in oil and gas industry. This holds true for both upstream and downstream segments of this global energy business. With the aging of this asset base, emphasis on its operational aspects has been under immense considerations from the operators and regulators sides. Moreover, the milieu of information area and enhancement in global trade has lifted the barriers on means to forge forward towards better utilization of resources. This has resulted in optimized solutions as priority for business and technical manager's world over. There is a paradigm shift from mere development of 'smart materials' to 'low life cycle cost material'. The force inducing this change is a rationale one: the recovery of development costs is no more a problem in a global community; rather it is the pay-off time which matters most to the materials end users. This means that decision makers are not evaluating just the price offered but are keen to judge the entire life cycle cost of a product. The integrity of pipe are affected by factors such as corrosion, fatigue-crack growth, stress-corrosion cracking, and mechanical damage. Extensive research in the area of reliability and life assessment has been carried out. A number of models concerning with the reliability issues of pipes have been developed and are being used by a number of pipeline operators worldwide. Yet, it is emphasised that there are no substitute for sound engineering judgment and allowance for factors of safety. The ability of a laid down pipe network to transport the intended fluid under pre-defined conditions for the entire project envisaged life, is referred to the reliability of system. The reliability is built into the product through extensive benchmarking against industry standard codes. The process of pipes construction for oil and gas service is regulated through American Petroleum Institute's Specification for Line Pipe. Subsequently, specific programs have been

  6. Supporting the personnel reliability decision-making process with artificial intelligence

    International Nuclear Information System (INIS)

    Harte, D.C.

    1991-01-01

    Recent legislation concerning personnel security has vastly increased the responsibility and accountability of the security manager. Access authorization, fitness for duty, and personnel security access programs require decisions regarding an individual's trustworthiness and reliability based on the findings of a background investigation. While these guidelines provide significant data and are useful as a tool, limited resources are available to the adjudicator of derogatory information on what is and is not acceptable in terms of granting access to sensitive areas of nuclear plants. The reason why one individual is deemed unacceptable and the next acceptable may be questioned and cause discriminatory accusations. This paper is continuation of discussion on workforce reliability, focusing on the use of artificial intelligence to support the decisions of a security manager. With this support, the benefit of previous decisions helps ensure consistent adjudication of background investigations

  7. Delivering on Industry Equipment Reliability Goals By Leveraging an Integration Platform and Decision Support Environment

    International Nuclear Information System (INIS)

    Coveney, Maureen K.; Bailey, W. Henry; Parkinson, William

    2004-01-01

    Utilities have invested in many costly enterprise systems - computerized maintenance management systems, document management systems, enterprise grade portals, to name but a few - and often very specialized systems, like data historians, high end diagnostic systems, and other focused and point solutions. From recent industry reports, we now know that the average nuclear power utilizes on average 1900 systems to perform daily work, of which 250 might facilitate the equipment reliability decision-making process. The time has come to leverage the investment in these systems by providing a common platform for integration and decision-making that will further the collective industry aim of enhancing the reliability of our nuclear generation assets to maintain high plant availability and to deliver on plant life extension goals without requiring additional large scale investment in IT infrastructure. (authors)

  8. Harmony in Life Scale - Turkish version: Studies of validity and reliability

    Directory of Open Access Journals (Sweden)

    Seydi Ahmet Satici

    2017-11-01

    Full Text Available Abstract This article presents the adaptation and psychometric evaluation of the Turkish version of Harmony in Life Scale (Turkish-HiL. The present paper investigates (study 1; N 1 = 253 confirmatory factor analysis, measurement invariance; (study 2; N 2 = 231 concurrent validity; (study 3; N 3 = 260 convergent and known-group validities; (study 4; N t − t = 50 test-retest, Cronbach alpha, and composite reliabilities of the Turkish-HiL. In study 1, based on a confirmatory factor analysis, results confirmed that unidimensional-factor structure. The results suggested that the model demonstrated a configural and metric invariance across the gender groups. In study 2, Turkish-HiL significantly correlated with measures of satisfaction with life, subjective happiness, positive affect, and negative affect. In study 3, Turkish-HiL was predicted positively by flourishing, conversely, negatively predicted by depression, anxiety, and stress. Finally, in study 4, alpha, composite and test-retest reliabilities are acceptable. Overall, the scale presented here may prove useful for satisfactorily assessing, in Turkish, the harmony in life of the university students.

  9. Considering Intermittent Dormancy in an Advanced Life Support Systems Architecture

    Science.gov (United States)

    Sargusingh, Miriam J.; Perry, Jay L.

    2017-01-01

    Many advanced human space exploration missions being considered by the National Aeronautics and Space Administration (NASA) include concepts in which in-space systems cycle between inhabited and uninhabited states. Managing the life support system (LSS) may be particularly challenged during these periods of intermittent dormancy. A study to identify LSS management challenges and considerations relating to dormancy is described. The study seeks to define concepts suitable for addressing intermittent dormancy states and to evaluate whether the reference LSS architectures being considered by the Advanced Exploration Systems (AES) Life Support Systems Project (LSSP) are sufficient to support this operational state. The primary focus of the study is the mission concept considered to be the most challenging-a crewed Mars mission with an extensive surface stay. Results from this study are presented and discussed.

  10. Preliminary study of the space adaptation of the MELiSSA life support system

    Science.gov (United States)

    Mas-Albaigès, Joan L.; Duatis, Jordi; Podhajsky, Sandra; Guirado, Víctor; Poughon, Laurent

    MELiSSA (Micro-Ecological Life Support System Alternative) is an European Space Agency (ESA) project focused on the development of a closed regenerative life support system to aid the development of technologies for future life support systems for long term manned planetary missions, e.g. a lunar base or missions to Mars. In order to understand the potential evolution of the MELiSSA concept towards its future use in the referred manned planetary mission context the MELiSSA Space Adaptation (MSA) activity has been undertaken. MSA's main objective is to model the different MELiSSA compartments using EcosimPro R , a specialized simulation tool for life support applications, in order to define a preliminary MELiSSA implementation for service in a man-tended lunar base scenario, with a four-member crew rotating in six-month increments, and performing the basic LSS functions of air revitalization, food production, and waste and water recycling. The MELiSSA EcosimPro R Model features a dedicated library for the different MELiSSA elements (bioreactors, greenhouse, crew, interconnecting elements, etc.). It is used to dimension the MELiSSA system in terms of major parameters like mass, volume and energy needs, evaluate the accuracy of the results and define the strategy for a progressive loop closure from the initial required performance (approx.100 The MELiSSA configuration(s) obtained through the EcosimPro R simulation are further analysed using the Advanced Life Support System Evaluation (ALISSE) metric, relying on mass, energy, efficiency, human risk, system reliability and crew time, for trade-off and optimization of results. The outcome of the MSA activity is, thus, a potential Life Support System architecture description, based on combined MELiSSA and other physico-chemical technologies, defining its expected performance, associated operational conditions and logistic needs.

  11. Reliability and Maintainability Model (RAM): User and Maintenance Manual. Part 2; Improved Supportability Analysis

    Science.gov (United States)

    Ebeling, Charles E.

    1996-01-01

    This report documents the procedures for utilizing and maintaining the Reliability & Maintainability Model (RAM) developed by the University of Dayton for the National Aeronautics and Space Administration (NASA) Langley Research Center (LaRC). The purpose of the grant is to provide support to NASA in establishing operational and support parameters and costs of proposed space systems. As part of this research objective, the model described here was developed. This Manual updates and supersedes the 1995 RAM User and Maintenance Manual. Changes and enhancements from the 1995 version of the model are primarily a result of the addition of more recent aircraft and shuttle R&M data.

  12. Reliability data collection on IC and VLSI devices tested under accelerated life conditions

    International Nuclear Information System (INIS)

    Barry, D.M.; Meniconi, M.

    1986-01-01

    As part of a more general investigation into the reliability and failure causes of semiconductor devices, statistical samples of integrated circuit devices (LM741C) and dynamic random access memory devices (TMS4116) were tested destructively to failure using elevated temperature as the accelerating stress. The devices were operated during the life test and the failure data generated were collected automatically using a multiple question-and-answer program and a process control computer. The failure data were modelled from the lognormal, inverse Gaussian and Weibull distribution using an Arrhenius reaction rate model. The failed devices were later decapsulated for failure cause determination. (orig./DG)

  13. The Effect of Providing Life Support on Nurses' Decision Making Regarding Life Support for Themselves and Family Members in Japan.

    Science.gov (United States)

    Shaku, Fumio; Tsutsumi, Madoka

    2016-12-01

    Decision making in terminal illness has recently received increased attention. In Japan, patients and their families typically make decisions without understanding either the severity of illness or the efficacy of life-supporting treatments at the end of life. Japanese culture traditionally directs the family to make decisions for the patient. This descriptive study examined the influence of the experiences of 391 Japanese nurses caring for dying patients and family members and how that experience changed their decision making for themselves and their family members. The results were mixed but generally supported the idea that the more experience nurses have in caring for the dying, the less likely they would choose to institute lifesupport measures for themselves and family members. The results have implications for discussions on end-of-life care. © The Author(s) 2016.

  14. Individuals' quality of life linked to major life events, perceived social support, and personality traits.

    Science.gov (United States)

    Pocnet, Cornelia; Antonietti, Jean-Philippe; Strippoli, Marie-Pierre F; Glaus, Jennifer; Preisig, Martin; Rossier, Jérôme

    2016-11-01

    The aim of this study was to investigate the relationship between major recent life events that occurred during the last 5 years, social and personal resources, and subjective quality of life (QoL). A total of 1801 participants from the general population (CoLaus/PsyCoLaus study) completed the Life Events Questionnaire, the Social Support Questionnaire, the NEO Five-Factor Inventory Revised, and the Manchester Short Assessment of Quality of Life. Major life events were modestly associated with the QoL (about 5 % of the explained variance). However, QoL was significantly related to perceived social support and personality traits (about 37 % of the explained variance). Particularly, perceived social support, extraversion and conscientiousness personality dimensions were positively linked to life satisfaction, whereas a high level of neuroticism was negatively associated with QoL. This study highlights the negative but temporary association between critical events and QoL. However, a combination of high conscientiousness and extraversion, and positive social support may explain better variances for a high-perceived QoL.

  15. A reliability based stress-life evaluation of aluminium-graphite particulate composites

    International Nuclear Information System (INIS)

    Achutha, M.V.; Sridhara, B.K.; Abdul Budan, D.

    2008-01-01

    Fatigue tests were conducted on sand cast aluminium-graphite composite specimens on Rotating Beam Fatigue Testing Machine with three different stress levels. Aluminium-graphite (LM 25-5% graphite) composite was processed by closed mould sand casting method. Three-stress level fatigue test program was planned for carrying out fatigue experiments. Three different stress levels selected for fatigue experiments were a fraction of ultimate tensile strength. Statistical design of fatigue experiments was carried out to determine the sample size at each stress level. Experimental results are presented in the form of stress-life (S-N) curves and reliability-stress-life (R-S-N) curves, which are helpful for designers. The S-N curve of the aluminium-graphite composite was compared with its matrix alloy LM 25. Comparison revealed that the fatigue behaviour of the aluminium-graphite composite is superior to that of the matrix alloy

  16. Reliability and failure modes of implant-supported zirconium-oxide fixed dental prostheses related to veneering techniques

    Science.gov (United States)

    Baldassarri, Marta; Zhang, Yu; Thompson, Van P.; Rekow, Elizabeth D.; Stappert, Christian F. J.

    2011-01-01

    Summary Objectives To compare fatigue failure modes and reliability of hand-veneered and over-pressed implant-supported three-unit zirconium-oxide fixed-dental-prostheses(FDPs). Methods Sixty-four custom-made zirconium-oxide abutments (n=32/group) and thirty-two zirconium-oxide FDP-frameworks were CAD/CAM manufactured. Frameworks were veneered with hand-built up or over-pressed porcelain (n=16/group). Step-stress-accelerated-life-testing (SSALT) was performed in water applying a distributed contact load at the buccal cusp-pontic-area. Post failure examinations were carried out using optical (polarized-reflected-light) and scanning electron microscopy (SEM) to visualize crack propagation and failure modes. Reliability was compared using cumulative-damage step-stress analysis (Alta-7-Pro, Reliasoft). Results Crack propagation was observed in the veneering porcelain during fatigue. The majority of zirconium-oxide FDPs demonstrated porcelain chipping as the dominant failure mode. Nevertheless, fracture of the zirconium-oxide frameworks was also observed. Over-pressed FDPs failed earlier at a mean failure load of 696 ± 149 N relative to hand-veneered at 882 ± 61 N (profile I). Weibull-stress-number of cycles-unreliability-curves were generated. The reliability (2-sided at 90% confidence bounds) for a 400N load at 100K cycles indicated values of 0.84 (0.98-0.24) for the hand-veneered FDPs and 0.50 (0.82-0.09) for their over-pressed counterparts. Conclusions Both zirconium-oxide FDP systems were resistant under accelerated-life-time-testing. Over-pressed specimens were more susceptible to fatigue loading with earlier veneer chipping. PMID:21557985

  17. The Effect of Epoxy Molding Compound Floor Life to Reliability Performance and mold ability for QFN Package

    Science.gov (United States)

    Peanpunga, Udom; Ugsornrat, Kessararat; Thorlor, Panakamol; Sumithpibul, Chalermsak

    2017-09-01

    This research studied about an epoxy molding compound (EMC) floor life to reliability performance of integrated circuit (IC) package. Molding is the process for protecting the die of IC package form mechanical and chemical reaction from external environment by shaping EMC. From normal manufacturing process, the EMC is stored in the frozen at 5oC and left at around room temperature for aging time or floor life before molding process. The EMC floor life effect to its properties and reliability performance of IC package. Therefore, this work interested in varied the floor life of EMC before molding process to analyze properties of EMC such as spiral flow length, gelation time, and viscosity. In experiment, the floor life of EMC was varied to check the effect of its property to reliability performance. The EMC floor life were varied from 0 hours to 60 hours with a step of 12 hours and observed wire sweep, incomplete EMC, and delamination inside the packages for 3x3, 5x5 and 8x8 mm2 of QFN packages. The evaluation showed about clearly effect of EMC floor life to IC packaging reliability. EMC floor life is not any concern for EMC property, moldabilty, and reliability from 0 hours to 48 hours for molding process of 3x3,5x5 and 8x8 mm2 QFN packaging manufacturing

  18. Reproducibility and Reliability of the Quality of Life Questionnaire in Patients With Atrial Fibrillation

    Directory of Open Access Journals (Sweden)

    Rita Simone Lopes Moreira

    2016-03-01

    Full Text Available Abstract Background: Studies have shown the impact of atrial fibrillation (AF on the patients' quality of life. Specific questionnaires enable the evaluation of relevant events. We previously developed a questionnaire to assess the quality of life of patients with AF (AFQLQ version 1, which was reviewed in this study, and new domains were added. Objective: To demonstrate the reproducibility of the AFQLQ version 2 (AFQLQ v.2, which included the domains of fatigue, illness perception and well-being. Methods: We applied 160 questionnaires (AFQLQ v.2 and SF-36 to 40 patients, at baseline and 15 days after, to measure inter- and intraobserver reproducibility. The analysis of quality of life stability was determined by test-retest, applying the Bartko intraclass correlation coefficient (ICC. Internal consistency was assessed by Cronbach's alpha test. Results: The total score of the test-retest (n = 40 had an ICC of 0.98 in the AFQLQ v.2, and of 0.94 in the SF36. In assessing the intra- and interobserver reproducibility of the AFQLQ v.2, the ICC reliability was 0.98 and 0.97, respectively. The internal consistency had a Cronbach's alpha coefficient of 0.82, compatible with good agreement of the AFQLQ v.2. Conclusion: The AFQLQ v.2 performed better than its previous version. Similarly, the domains added contributed to make it more comprehensive and robust to assess the quality of life of patients with AF.

  19. End-stage dementia spark of life: reliability and validity of the "GATOS" questionnaire.

    Science.gov (United States)

    Tsoucalas, Gregory; Bourelia, Stamati; Kalogirou, Vaso; Giatsiou, Styliani; Mavrogiannaki, Eirini; Gatos, Georgios; Galanos, Antonis; Repana, Olga; Iliadou, Eleni; Antoniou, Antonis; Sgantzos, Markos; Gatos, Konstantinos

    2015-01-01

    Fl oor effects are present in most dementia assessment tools as dementia progresses and the in-depth assessment of patients considered more or less on vegetative state is questionable. To develop a questionnaire (the "Gatos Clinical Test-GCT") for the assessment of end-stage demented patients. Five hundred patients with dementia of various causes and an MMSE score between 0 and 2 were enrolled in the study. The GCT consists of 14 closed type questions rated on a Likert scale. The total score is used to evaluate patient's dementia. Various aspects of validity and reliability (including face, content and structural validity as well as test-retest reliability) were examined. Three subscales "Autonomy/Alertness", "Gnosias" and "Somatokinetic function" were defined, with a Cronbach equal to 0.851, 0.756 and 0.598 respectively. The GCT subscales and total score were statistically significant higher in patients with MMSE score 1 or 2 compared with those with MMSE score 0 (pGATOS" questionnaire is a valid and reliable test for patients with severe dementia, aiming at identification of those patients who could sustain some quality of life. It is a relatively short and easy to administer tool. As dementia prevalence is expected to rise further worldwide we believe that GCT could offer valuable services to health professionals, caregivers and patients.

  20. Constitutional and legal protection for life support limitation in India

    Directory of Open Access Journals (Sweden)

    R K Mani

    2015-01-01

    Full Text Available Appropriate treatment limitations towards the end of life to reduce unwanted burdens require ethical clarity that is supported by appropriate legislation. The lack of knowledge of enabling legal provisions, physicians feel vulnerable to legal misinterpretation of treatment limiting decisions. In India the lack of societal awareness, inadequate exploration of the gray areas of bio-ethics and unambiguous legal position relating to terminal illness have resulted in poor quality end of life care. Much of the perceived vulnerability by the physician is attributable to insufficient knowledge and understanding of existing constitutional and legal position in India. While we await informed legal and legislative opinion, this paper highlights possible legal liabilities arising from treatment limitation decisions with available defense. It is hoped that such clarity would lead to more confident ethical decisions and improved end of life care for patients.

  1. Effect of ionizing radiation on advanced life support medications

    International Nuclear Information System (INIS)

    Sullivan, D.J.; Hubbard, L.B.; Broadbent, M.V.; Stewart, P.; Jaeger, M.

    1987-01-01

    Advanced life support medications stored in emergency department stretcher areas, diagnostic radiology rooms, and radiotherapy suites are exposed to ionizing radiation. We hypothesized that radiation may decrease the potency and thus the shelf life of medications stored in these areas. Atropine, dopamine, epinephrine, and isoproterenol were exposed to a wide range of ionizing radiation. The potency of the four drugs was unaffected by levels of radiation found in ED stretcher areas and high-volume diagnostic radiograph rooms (eg, chest radiograph, computed tomography, fluoroscopy). The potency of atropine may be reduced by gamma radiation in high-use radiotherapy suites. However, dopamine, epinephrine, and isoproterenol were unaffected by high doses of gamma radiation. Atropine, dopamine, epinephrine, and isoproterenol may be safely kept in ED stretcher areas and diagnostic radiology rooms without loss of potency over the shelf life of the drugs

  2. Accuracy and Reliability in the Prediction of End-of-Life Performance of Solar Generators

    Science.gov (United States)

    Rapp, Etienne

    2008-09-01

    The end-of-life power analysis of solar arrays is calculated using a combination of arithmetic and root square sums of loss factors. These loss factors are sometimes linked to degradations, sometimes linked to uncertainties. The uncertainties of the degradations are taken into account considering contractual "worst cases". This paper will put the first stones for a move "metrological" evaluation of the probable performance associated with a standard uncertainty. The turn from silicon to triple junction solar cells induces some changes in the degradation parameters of solar arrays: * The triple junction cells are more sensitive to UV darkening than silicon ones. * The cell voltage is higher and the current is lower. Then the cell strings are shorter, and there are more strings in parallel. This induces some changes in the reliability analyses and risk management. * The failure modes and failure rates of these cells have to be compared and discussed. We try to define improved rules to design solar arrays for end of life performance, for a better knowledge of the margins and a better reliability.

  3. ADULT BASIC LIFE SUPPORT ON NEAR DROWNING AT THE SCENE

    Directory of Open Access Journals (Sweden)

    Gd. Harry Kurnia Prawedana

    2013-04-01

    Full Text Available Indonesia is a popular tourist destination which has potential for drowning cases. Therefore, required knowledge of adult basic life support to be able to deal with such cases in the field. Basic life support in an act to maintain airway and assist breathing and circulation without the use of tools other than simple breathing aids. The most important factor that determines the outcome of drowning event is the duration and severity of hypoxia induced. The management of near drowning at the scene include the rescue of victim from the water, rescue breathing, chest compression, cleaning the vomit substances which allowing blockage of the airway, prevent loss of body heat, and transport the victim to nearest emergency department for evaluation and monitoring.

  4. Life Support and Habitation and Planetary Protection Workshop

    Science.gov (United States)

    Hogan, John A. (Editor); Race, Margaret S. (Editor); Fisher, John W. (Editor); Joshi, Jitendra A. (Editor); Rummel, John D. (Editor)

    2006-01-01

    A workshop entitled "Life Support and Habitation and Planetary Protection Workshop" was held in Houston, Texas on April 27-29, 2005 to facilitate the development of planetary protection guidelines for future human Mars exploration missions and to identify the potential effects of these guidelines on the design and selection of related human life support, extravehicular activity and monitoring and control systems. This report provides a summary of the workshop organization, starting assumptions, working group results and recommendations. Specific result topics include the identification of research and technology development gaps, potential forward and back contaminants and pathways, mitigation alternatives, and planetary protection requirements definition needs. Participants concluded that planetary protection and science-based requirements potentially affect system design, technology trade options, development costs and mission architecture. Therefore early and regular coordination between the planetary protection, scientific, planning, engineering, operations and medical communities is needed to develop workable and effective designs for human exploration of Mars.

  5. A support vector density-based importance sampling for reliability assessment

    International Nuclear Information System (INIS)

    Dai, Hongzhe; Zhang, Hao; Wang, Wei

    2012-01-01

    An importance sampling method based on the adaptive Markov chain simulation and support vector density estimation is developed in this paper for efficient structural reliability assessment. The methodology involves the generation of samples that can adaptively populate the important region by the adaptive Metropolis algorithm, and the construction of importance sampling density by support vector density. The use of the adaptive Metropolis algorithm may effectively improve the convergence and stability of the classical Markov chain simulation. The support vector density can approximate the sampling density with fewer samples in comparison to the conventional kernel density estimation. The proposed importance sampling method can effectively reduce the number of structural analysis required for achieving a given accuracy. Examples involving both numerical and practical structural problems are given to illustrate the application and efficiency of the proposed methodology.

  6. Project Orion, Environmental Control and Life Support System Integrated Studies

    Science.gov (United States)

    Russell, James F.; Lewis, John F.

    2008-01-01

    Orion is the next vehicle for human space travel. Humans will be sustained in space by the Orion subystem, environmental control and life support (ECLS). The ECLS concept at the subsystem level is outlined by function and technology. In the past two years, the interface definition with other subsystems has increased through different integrated studies. The paper presents the key requirements and discusses three recent studies (e.g., unpressurized cargo) along with the respective impacts on the ECLS design moving forward.

  7. Controlled Ecological Life Support System Breadboard Project - 1988

    Science.gov (United States)

    Knott, W. M.

    1989-01-01

    The Controlled Ecological Life Support System (CELSS) Breadboard Project, NASA's effort to develop the technology required to produce a functioning bioregenerative system, is discussed. The different phases of the project and its current status are described. The relationship between the project components are shown, and major project activities for fiscal years 1989-1993 are listed. The biomass production chamber to be used by the project is described.

  8. Controlled ecological life support system breadboard project, 1988

    Science.gov (United States)

    Knott, W. M.

    1990-01-01

    The Closed Ecological Life Support System (CELSS) Breadboard Project, NASA's effort to develop the technology required to produce a functioning bioregenerative system, is discussed. The different phases of the project and its current status are described. The relationship between the project components are shown, and major project activities for fiscal years 1989 to 1993 are listed. The Biomass Production Chamber (BPC) became operational and tests of wheat as a single crop are nearing completion.

  9. User`s manual of a support system for human reliability analysis

    Energy Technology Data Exchange (ETDEWEB)

    Yokobayashi, Masao [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment; Tamura, Kazuo

    1995-10-01

    Many kinds of human reliability analysis (HRA) methods have been developed. However, users are required to be skillful so as to use them, and also required complicated works such as drawing event tree (ET) and calculation of uncertainty bounds. Moreover, each method is not so complete that only one method of them is not enough to evaluate human reliability. Therefore, a personal computer (PC) based support system for HRA has been developed to execute HRA practically and efficiently. The system consists of two methods, namely, simple method and detailed one. The former uses ASEP that is a simplified THERP-technique, and combined method of OAT and HRA-ET/DeBDA is used for the latter. Users can select a suitable method for their purpose. Human error probability (HEP) data were collected and a database of them was built to use for the support system. This paper describes outline of the HRA methods, support functions and user`s guide of the system. (author).

  10. Reliability-based fatigue life estimation of shear riveted connections considering dependency of rivet hole failures

    Directory of Open Access Journals (Sweden)

    Leonetti* Davide

    2018-01-01

    Full Text Available Standards and guidelines for the fatigue design of riveted connections make use of a stress range-endurance (S-N curve based on the net section stress range regardless of the number and the position of the rivets. Almost all tests on which S-N curves are based, are performed with a minimum number of rivets. However, the number of rivets in a row is expected to increase the fail-safe behaviour of the connection, whereas the number of rows is supposed to decrease the theoretical stress concentration at the critical locations, and hence these aspects are not considered in the S-N curves. This paper presents a numerical model predicting the fatigue life of riveted connections by performing a system reliability analysis on a double cover plated riveted butt joint. The connection is considered in three geometries, with different number of rivets in a row and different number of rows. The stress state in the connection is evaluated using a finite element model in which the friction coefficient and the clamping force in the rivets are considered in a deterministic manner. The probability of failure is evaluated for the main plate, and fatigue failure is assumed to be originating at the sides of the rivet holes, the critical locations, or hot-spots. The notch stress approach is applied to assess the fatigue life, considered to be a stochastic quantity. Unlike other system reliability models available in the literature, the evaluation of the probability of failure takes into account the stochastic dependence between the failures at each critical location modelled as a parallel system, which means considering the change of the state of stress in the connection when a ligament between two rivets fails. A sensitivity study is performed to evaluate the effect of the pretension in the rivet and the friction coefficient on the fatigue life.

  11. Reliability of Wind Speed Data from Satellite Altimeter to Support Wind Turbine Energy

    Science.gov (United States)

    Uti, M. N.; Din, A. H. M.; Omar, A. H.

    2017-10-01

    Satellite altimeter has proven itself to be one of the important tool to provide good quality information in oceanographic study. Nowadays, most countries in the world have begun in implementation the wind energy as one of their renewable energy for electric power generation. Many wind speed studies conducted in Malaysia using conventional method and scientific technique such as anemometer and volunteer observing ships (VOS) in order to obtain the wind speed data to support the development of renewable energy. However, there are some limitations regarding to this conventional method such as less coverage for both spatial and temporal and less continuity in data sharing by VOS members. Thus, the aim of this research is to determine the reliability of wind speed data by using multi-mission satellite altimeter to support wind energy potential in Malaysia seas. Therefore, the wind speed data are derived from nine types of satellite altimeter starting from year 1993 until 2016. Then, to validate the reliability of wind speed data from satellite altimeter, a comparison of wind speed data form ground-truth buoy that located at Sabah and Sarawak is conducted. The validation is carried out in terms of the correlation, the root mean square error (RMSE) calculation and satellite track analysis. As a result, both techniques showing a good correlation with value positive 0.7976 and 0.6148 for point located at Sabah and Sarawak Sea, respectively. It can be concluded that a step towards the reliability of wind speed data by using multi-mission satellite altimeter can be achieved to support renewable energy.

  12. [The analytical reliability of clinical laboratory information and role of the standards in its support].

    Science.gov (United States)

    Men'shikov, V V

    2012-12-01

    The article deals with the factors impacting the reliability of clinical laboratory information. The differences of qualities of laboratory analysis tools produced by various manufacturers are discussed. These characteristics are the causes of discrepancy of the results of laboratory analyses of the same analite. The role of the reference system in supporting the comparability of laboratory analysis results is demonstrated. The project of national standard is presented to regulate the requirements to standards and calibrators for analysis of qualitative and non-metrical characteristics of components of biomaterials.

  13. Closed ecological life-support systems and their applications

    Science.gov (United States)

    Gitelson, Josef I.

    The advent of man-made closed ecosystems (CES) is a solution of the fundamental problem-egress of humans beyond the Earth's biosphere, providing biological basis for exploitation of Space and celestial bodies. Yet, before proceeding to these ambitious project elements of closed life-support biotechnologies, there can be found diverse applications on Earth in human settlements providing for high quality of life under extreme environment conditions: high latitudes, deserts, mountains and industrially polluted areas. This presentation considers these variations of terrestrial applications of CELSS technologies. The version of CES under development is based on making direct use of the light energy in plant photosynthesis. In this case life support of one man on the Earth orbit requires solar light collected from 5-10m2. Among terrestrial applications of prime importance is the development of an ecohome designed to provide people with a high quality of life in Arctic and Antarctic territories. The developed technology of cascade employment of energy makes possible (expending 10-15 kw of installed power per a house-3-5 member family) to provide for: permanent supply of fresh vitamin-full vegetables, absorption and processing oaf excreta, purification of water and air in the living quarters, habitual colour and light conditions in the premises in winter making up to sensorial deprivation and, finally, psychological comfort of close contact with the plants during the long polar night. Ecohabitat based on the technology described in realistic today and depends only on the energy available and the resolution and readiness (sagacity) of the decision-makers to be committed with ecohome assigning. The ecological and economical significance of construction of ecohabitats for the northern territories of Canada, Alaska and Russia is apparent. This principle can be used (with considerable economy of energy and construction costs) to maintain normal partial pressure of oxygen inside

  14. Reliability and Validity of the Multidimensional Scale of Perceived Social Support (MSPSS): Thai Version.

    Science.gov (United States)

    Wongpakaran, Tinakon; Wongpakaran, Nahathai; Ruktrakul, Ruk

    2011-01-01

    This study examines the Thai version of the Multidimensional Scale of Perceived Social Support (MSPSS) for its psychometric properties. In total 462 participants were recruited - 310 medical students from Chiang Mai University and 152 psychiatric patients, and they completed the Thai version of the MSPSS, the State Trait Anxiety Inventory (STAI), the Rosenberg Self-Esteem Scale (RSES) and the Thai Depression Inventory (TDI). Test-retest reliability was conducted over a four week period. Factor analysis produced three-factor solutions for both patient (PG) and student groups (SG), and overall the model demonstrated adequate fit indices. The mean total score and the sub-scale score for the SG were statistically higher than those in the PG, except for 'Significant Others'. The internal consistency of the scale was good, with a Cronbach's alpha of 0.91 for the SG and 0.87 for the PG. After a four week retest for reliability exercise, the intra-class correlation coefficient (ICC) was found to be 0.84. The Thai-MSPSS was found to have a negative correlation with the STAI and the TDI, but was positively correlated with the RSES. The Thai MSPSS is a reliable and valid instrument to use.

  15. Using the Reliability Theory for Assessing the Decision Confidence Probability for Comparative Life Cycle Assessments.

    Science.gov (United States)

    Wei, Wei; Larrey-Lassalle, Pyrène; Faure, Thierry; Dumoulin, Nicolas; Roux, Philippe; Mathias, Jean-Denis

    2016-03-01

    Comparative decision making process is widely used to identify which option (system, product, service, etc.) has smaller environmental footprints and for providing recommendations that help stakeholders take future decisions. However, the uncertainty problem complicates the comparison and the decision making. Probability-based decision support in LCA is a way to help stakeholders in their decision-making process. It calculates the decision confidence probability which expresses the probability of a option to have a smaller environmental impact than the one of another option. Here we apply the reliability theory to approximate the decision confidence probability. We compare the traditional Monte Carlo method with a reliability method called FORM method. The Monte Carlo method needs high computational time to calculate the decision confidence probability. The FORM method enables us to approximate the decision confidence probability with fewer simulations than the Monte Carlo method by approximating the response surface. Moreover, the FORM method calculates the associated importance factors that correspond to a sensitivity analysis in relation to the probability. The importance factors allow stakeholders to determine which factors influence their decision. Our results clearly show that the reliability method provides additional useful information to stakeholders as well as it reduces the computational time.

  16. A fast method for calculating reliable event supports in tree reconciliations via Pareto optimality.

    Science.gov (United States)

    To, Thu-Hien; Jacox, Edwin; Ranwez, Vincent; Scornavacca, Celine

    2015-11-14

    Given a gene and a species tree, reconciliation methods attempt to retrieve the macro-evolutionary events that best explain the discrepancies between the two tree topologies. The DTL parsimonious approach searches for a most parsimonious reconciliation between a gene tree and a (dated) species tree, considering four possible macro-evolutionary events (speciation, duplication, transfer, and loss) with specific costs. Unfortunately, many events are erroneously predicted due to errors in the input trees, inappropriate input cost values or because of the existence of several equally parsimonious scenarios. It is thus crucial to provide a measure of the reliability for predicted events. It has been recently proposed that the reliability of an event can be estimated via its frequency in the set of most parsimonious reconciliations obtained using a variety of reasonable input cost vectors. To compute such a support, a straightforward but time-consuming approach is to generate the costs slightly departing from the original ones, independently compute the set of all most parsimonious reconciliations for each vector, and combine these sets a posteriori. Another proposed approach uses Pareto-optimality to partition cost values into regions which induce reconciliations with the same number of DTL events. The support of an event is then defined as its frequency in the set of regions. However, often, the number of regions is not large enough to provide reliable supports. We present here a method to compute efficiently event supports via a polynomial-sized graph, which can represent all reconciliations for several different costs. Moreover, two methods are proposed to take into account alternative input costs: either explicitly providing an input cost range or allowing a tolerance for the over cost of a reconciliation. Our methods are faster than the region based method, substantially faster than the sampling-costs approach, and have a higher event-prediction accuracy on

  17. Reliability and validity of the body image quality of life inventory: version for Brazilian burn victims.

    Science.gov (United States)

    Assunção, Flávia Fernanda Oliveira; Dantas, Rosana Aparecida Spadoti; Ciol, Márcia Aparecida; Gonçalves, Natália; Farina, Jayme Adriano; Rossi, Lidia Aparecida

    2013-06-01

    The aims of this study were to adapt the Body Image Quality of Life Inventory (BIQLI) into Brazilian Portuguese (BP) and to assess the psychometric properties of the adapted version. Construct validity was assessed by correlating the BIQLI-BP scores with the Rosenberg's Self-Esteem Scale, with Burns Specific Health Scale-Revised (BSHS-R), and with gender, total body surface area burned, and visibility of the scars. Participants were 77 adult burn patients. Cronbach's alpha for the adapted version was .90 and moderate linear correlations were found between body image and self-esteem and between BIQLI-BP scores and two domains of the BSHS-R: affect and body image and interpersonal relationships. The BIQLI-BP showed acceptable levels of reliability and validity for Brazilian burn patients. Copyright © 2013 Wiley Periodicals, Inc.

  18. Reproducibility and reliability of hypoglycaemic episodes recorded with Continuous Glucose Monitoring System (CGMS) in daily life

    DEFF Research Database (Denmark)

    Høi-Hansen, T; Pedersen-Bjergaard, U; Thorsteinsson, B

    2005-01-01

    AIM: Continuous glucose monitoring may reveal episodes of unrecognized hypoglycaemia. We evaluated reproducibility and reliability of hypoglycaemic episodes recorded in daily life by the Medtronic MiniMed Continuous Glucose Monitoring System (CGMS). METHODS: Twenty-nine adult patients with Type 1...... data were recalibrated generating four different CGMS data sets [left-A (left side of abdomen, calibration set A), left-B, right-A and right-B]. Agreement between CGMS data sets was evaluated during hypoglycaemic events, comparing CGMS readings = 2.2 mmol/l with nadir values from corresponding CGMS...... data sets. CGMS readings were also compared with independent self-monitored blood glucose (SMBG) values. RESULTS: With hypoglycaemia (CGMS readings = 2.2 mmol/l) in calibration set left-A, values below 3.5 mmol/l were present in 99% (95% CI: 95-100%) of samples in left-B, 91% (95% CI: 84...

  19. Effectiveness of Basic Life Support Training for Middle School Students.

    Science.gov (United States)

    Aloush, Sami; Tubaishat, Ahmad; ALBashtawy, Mohammed; Suliman, Mohammad; Alrimawi, Intima; Al Sabah, Ashraf; Banikhaled, Yousef

    2018-01-01

    Bystander cardiopulmonary resuscitation improves survival after out-of-hospital cardiac arrest. This study aimed to assess the effectiveness of a basic life support (BLS) educational course given to 110 middle school children, using a pretest posttest design. In the pretest, students were asked to demonstrate BLS on a manikin to simulate a real-life scenario. After the pretest, a BLS training course of two sessions was provided, followed by posttest on the same manikin. Students were assessed using an observational sheet based on the American Heart Association's BLS guidelines. In the pretest, students showed significant weakness in the majority of guidelines. In the posttest, they demonstrated significant improvement in their BLS skills. BLS training in the middle school was effective, considering the lack of previous skills. It is recommended that BLS education be compulsory in the school setting.

  20. A new chart to assist with advanced trauma life support.

    Science.gov (United States)

    Palmer, I P; Baskett, P J; McCabe, S E

    1992-10-01

    Many studies have drawn attention to deficiencies in the management of major trauma, both in the UK and elsewhere. One area that has received little attention is the documentation of such cases in the Emergency Room. When outcome may be sub-optimal, documentation assumes greater importance if advances are to be made in the organisation of trauma care. Based upon the American College of Surgeons Advanced Trauma Life Support (ATLS) protocols, the authors have designed a document that records dynamically what happens to the multiply injured victim on arrival in the Emergency Room. It unifies the recording of vital signs, whilst acting as an assessment and resuscitation template. By ensuring no life-threatening illness is missed it is likely to improve patient survival. The document can act as a basis for teaching and a medico-legal record, whilst providing the necessary data for quality assurance and outcome audit.

  1. The Behçet's Disease Quality of Life: Reliability and Validity of the Korean Version

    Science.gov (United States)

    Yi, Sang Won; Kim, Ji-Hae; Lim, Ki-Young; Bang, Dongsik; Lee, Sungnack

    2008-01-01

    Purpose The Behçet's Disease Quality of Life (BD-QoL) is a BD-specific measure developed in the UK. The aim of this study was to adapt the BD-QoL for use in Korea. Patients and Methods The translation was based on the guidelines for cross-cultural adaptation. A total of 201 Korean patients with BD participated in this study. To evaluate the psychometric properties, internal consistency and test-retest reliability were used. Factor analysis was performed to examine the construct validity. To provide further evidence for validity, the correlation of BD-QoL with the Clinical Activity Form for Korean Patients with BD (BDCAF-K) and the Center for Epidemiologic Studies-Depression (CES-D) scales was assessed. Results The Korean version had high internal consistency (Cronbach's alpha, 0.93) and test-retest reliability (r = 0.835). Factor analysis of the questionnaire revealed one interpretable factor as a general health-related quality of life factor. The Korean version significantly correlated with scores of CES-D (r = 0.749, p= 0.000), self-rating scale of well-being over the past 28 days (r = 0.446, p= 0.000), and BDCAF-K score (r = 0.502, p = 0.000). Conclusion Adaptation of the BD-QoL for use in Korea was successful. Together with the BDCAF-K, it may be a valuable tool for assessing the influence of interventions in BD patients and outcome in clinical trials. PMID:18972588

  2. Advanced Hazmat Life Support (AHLS): A Feasibility Assessment

    International Nuclear Information System (INIS)

    Borron, S. W.; Walter, F. G.

    2007-01-01

    A prospective, descriptive, feasibility study aimed to determine whether an interdisciplinary group of health care experts could design and successfully deliver an international, life support, continuing education program that teaches the medical management of hazardous materials (hazmat) patients. The American Academy of Clinical Toxicology and the University of Arizona College of Medicine, Arizona Emergency Medicine Research Center partnered on July 1, 1998 to develop a two-day Advanced Hazmat Life Support (AHLS) Provider Course. Interdisciplinary expert clinicians designed and then delivered the first AHLS Provider Course in 1999. Prior to this, other courses focused on the management of hazmat incidents and almost exclusively on the prehospital care of hazmat victims by firefighters, hazardous materials technicians, and emergency medical technicians (EMTs), not on the medical management of patients from these incidents. Therefore, AHLS was developed for a broader interdisciplinary group of health care professionals, including both prehospital health care professionals and hospital-based, poison center-based, clinic-based, public health care-based, and other health care professionals. From 1999 through 2006, the AHLS Provider Course has trained 7,142 health care professionals from 48 countries. Of the 7,142 health care professionals worldwide, 43% are paramedics, 24% are physicians, 21% are nurses, 2% are pharmacists, 1% are physician assistants, and 9% are other professionals. Of the professionals trained, 88% are from the United States, 5% from Hong Kong, 2% from Canada, 2% from Australia, 1% from Mexico, and the remainder come from 43 other countries. The Advanced Hazmat Life Support Program is feasible and meets the continuing education needs of health care professionals around the world.(author)

  3. Sensemaking in the formation of basic life support teams

    DEFF Research Database (Denmark)

    Hallas, Peter; Lauridsen, Johnny; Brabrand, Mikkel

    2018-01-01

    well known in organizational studies. It refers to the collaborative effort among members in a dialogue to create meaning in an ambiguous situation, often by using subtle variations in the sentences in the dialogue. Sentences with high degrees of "sensemaking" activity can be thematized as "co......-orientation", "re-presentation" and/or "subordination" (among others). We sought to establish if elements of "sensemaking" occur in the formation of in-hospital cardiac arrest teams. METHODS: Videos of ten simulations of unannounced in-hospital cardiac arrests treated by basic life support (BLS) providers. We...

  4. Space Station Environmental Control/Life Support System engineering

    Science.gov (United States)

    Miller, C. W.; Heppner, D. B.

    1985-01-01

    The present paper is concerned with a systems engineering study which has provided an understanding of the overall Space Station ECLSS (Environmental Control and Life Support System). ECLSS/functional partitioning is considered along with function criticality, technology alternatives, a technology description, single thread systems, Space Station architectures, ECLSS distribution, mechanical schematics per space station, and Space Station ECLSS characteristics. Attention is given to trade studies and system synergism. The Space Station functional description had been defined by NASA. The ECLSS will utilize technologies which embody regenerative concepts to minimize the use of expendables.

  5. Advanced life support for cardiac arrest beyond the algorithm

    DEFF Research Database (Denmark)

    Rudolph, Søren Steemann; Isbye, Dan Lou; Pfeiffer, Peter

    2018-01-01

    In an advanced emergency medical service all parts of the advanced life support (ALS) algorithm can be provided. This evidence-based algorithm outlines resuscitative efforts for the first 10-15 minutes after cardiac arrest, whereafter the algorithm repeats itself. Restoration of spontaneous...... circulation fails in most cases, but in some circumstances the patient may benefit from additional interventional approaches, in which case transport to hospital with ongoing cardiopulmonary resuscitation is indicated. This paper has summarized treatments outside the ALS algorithm, which may be beneficial...

  6. Bioregenerative life support system for a lunar base

    Science.gov (United States)

    Liu, H.; Wang, J.; Manukovsky, N. S.; Kovalev, V. S.; Gurevich, Yu. L.

    We have studied a modular approach to construction of bioregenerative life support system BLSS for a lunar base using soil-like substrate SLS for plant cultivation Calculations of massflow rates in BLSS were based mostly on a vegetarian diet and biological conversion of plant residues in SLS Plant candidate list for lunar BLSS includes the following basic species rice Oryza sativa soy Glycine max sweet potato Ipomoea batatas and wheat Triticum aestivum To reduce the time necessary for transition of the system to steady state we suggest that the first seeding and sprouting could be made on Earth

  7. Functional Interface Considerations within an Exploration Life Support System Architecture

    Science.gov (United States)

    Perry, Jay L.; Sargusingh, Miriam J.; Toomarian, Nikzad

    2016-01-01

    As notional life support system (LSS) architectures are developed and evaluated, myriad options must be considered pertaining to process technologies, components, and equipment assemblies. Each option must be evaluated relative to its impact on key functional interfaces within the LSS architecture. A leading notional architecture has been developed to guide the path toward realizing future crewed space exploration goals. This architecture includes atmosphere revitalization, water recovery and management, and environmental monitoring subsystems. Guiding requirements for developing this architecture are summarized and important interfaces within the architecture are discussed. The role of environmental monitoring within the architecture is described.

  8. Reliability and validity of DS-ADHD: A decision support system on attention deficit hyperactivity disorders.

    Science.gov (United States)

    Chu, Kuo-Chung; Huang, Yu-Shu; Tseng, Chien-Fu; Huang, Hsin-Jou; Wang, Chih-Huan; Tai, Hsin-Yi

    2017-03-01

    The purpose of this study is to examine the reliability of the clinical use of the self-built decision support system, diagnosis-supported attention deficit hyperactivity disorder (DS-ADHD), in an effort to develop the DS-ADHD system, by probing into the development of indicating patterns of past screening support systems for ADHD. The study collected data based on 107 subjects, who were divided into two groups, non-ADHD and ADHD, based on the doctor's determination, using the DSM-IV diagnostic standards. The two groups then underwent Test of Variables of Attention (TOVA) and DS-ADHD testing. The survey and testing results underwent one-way ANOVA and split-half method statistical analysis, in order to further understand whether there were any differences between the DS-ADHD and the identification tools used in today's clinical trials. The results of the study are as follows: 1) The ROC area between the TOVA and the clinical identification rate is 0.787 (95% confidence interval: 0.701-0.872); 2) The ROC area between the DS-ADHD and the clinical identification rate is 0.867 (95% confidence interval: 0.801-0.933). The study results show that DS-ADHD has the characteristics of screening for ADHD, based on its reliability and validity. It does not display any statistical differences when compared with TOVA systems that are currently on the market. However, the system is more effective and the accuracy rate is better than TOVA. It is a good tool to screen ADHD not only in Chinese children, but also in western country. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

  9. Architecture and life support systems for a rotating space habitat

    Science.gov (United States)

    Misra, Gaurav

    Life Support Systems are critical to sustain human habitation of space over long time periods. As orbiting space habitats become operational in the future, support systems such as atmo-sphere, food, water etc. will play a very pivotal role in sustaining life. To design a long-duration space habitat, it's important to consider the full gamut of human experience of the environment. Long-term viability depends on much more than just the structural or life support efficiency. A space habitat isn't just a machine; it's a life experience. To be viable, it needs to keep the inhabitants satisfied with their condition. This paper provides conceptual research on several key factors that influence the growth and sustainability of humans in a space habitat. Apart from the main life support system parameters, the architecture (both interior and exterior) of the habitat will play a crucial role in influencing the liveability in the space habitat. In order to ensure the best possible liveability for the inhabitants, a truncated (half cut) torus is proposed as the shape of the habitat. This structure rotating at an optimum rpm will en-sure 1g pseudo gravity to the inhabitants. The truncated torus design has several advantages over other proposed shapes such as a cylinder or a sphere. The design provides minimal grav-ity variation (delta g) in the living area, since its flat outer pole ensures a constant gravity. The design is superior in economy of structural and atmospheric mass. Interior architecture of the habitat addresses the total built environment, drawing from diverse disciplines includ-ing physiology, psychology, and sociology. Furthermore, factors such as line of sight, natural sunlight and overhead clearance have been discussed in the interior architecture. Substantial radiation shielding is also required in order to prevent harmful cosmic radiations and solar flares from causing damage to inhabitants. Regolith shielding of 10 tons per meter square is proposed for the

  10. Next Generation Life Support Project: Development of Advanced Technologies for Human Exploration Missions

    Science.gov (United States)

    Barta, Daniel J.

    2012-01-01

    Next Generation Life Support (NGLS) is one of several technology development projects sponsored by the National Aeronautics and Space Administration s Game Changing Development Program. NGLS is developing life support technologies (including water recovery, and space suit life support technologies) needed for humans to live and work productively in space. NGLS has three project tasks: Variable Oxygen Regulator (VOR), Rapid Cycle Amine (RCA) swing bed, and Alternative Water Processing. The selected technologies within each of these areas are focused on increasing affordability, reliability, and vehicle self sufficiency while decreasing mass and enabling long duration exploration. The RCA and VOR tasks are directed at key technology needs for the Portable Life Support System (PLSS) for an Exploration Extravehicular Mobility Unit (EMU), with focus on prototyping and integrated testing. The focus of the Rapid Cycle Amine (RCA) swing-bed ventilation task is to provide integrated carbon dioxide removal and humidity control that can be regenerated in real time during an EVA. The Variable Oxygen Regulator technology will significantly increase the number of pressure settings available to the space suit. Current spacesuit pressure regulators are limited to only two settings while the adjustability of the advanced regulator will be nearly continuous. The Alternative Water Processor efforts will result in the development of a system capable of recycling wastewater from sources expected in future exploration missions, including hygiene and laundry water, based on natural biological processes and membrane-based post treatment. The technologies will support a capability-driven architecture for extending human presence beyond low Earth orbit to potential destinations such as the Moon, near Earth asteroids and Mars.

  11. Requirements for Designing Life Support System Architectures for Crewed Exploration Missions Beyond Low-Earth Orbit

    Science.gov (United States)

    Howard, David; Perry,Jay; Sargusingh, Miriam; Toomarian, Nikzad

    2016-01-01

    NASA's technology development roadmaps provide guidance to focus technological development on areas that enable crewed exploration missions beyond low-Earth orbit. Specifically, the technology area roadmap on human health, life support and habitation systems describes the need for life support system (LSS) technologies that can improve reliability and in-situ maintainability within a minimally-sized package while enabling a high degree of mission autonomy. To address the needs outlined by the guiding technology area roadmap, NASA's Advanced Exploration Systems (AES) Program has commissioned the Life Support Systems (LSS) Project to lead technology development in the areas of water recovery and management, atmosphere revitalization, and environmental monitoring. A notional exploration LSS architecture derived from the International Space has been developed and serves as the developmental basis for these efforts. Functional requirements and key performance parameters that guide the exploration LSS technology development efforts are presented and discussed. Areas where LSS flight operations aboard the ISS afford lessons learned that are relevant to exploration missions are highlighted.

  12. Advanced Life Support Project: Crop Experiments at Kennedy Space Center

    Science.gov (United States)

    Sager, John C.; Stutte, Gary W.; Wheeler, Raymond M.; Yorio, Neil

    2004-01-01

    Crop production systems provide bioregenerative technologies to complement human crew life support requirements on long duration space missions. Kennedy Space Center has lead NASA's research on crop production systems that produce high value fresh foods, provide atmospheric regeneration, and perform water processing. As the emphasis on early missions to Mars has developed, our research focused on modular, scalable systems for transit missions, which can be developed into larger autonomous, bioregenerative systems for subsequent surface missions. Components of these scalable systems will include development of efficient light generating or collecting technologies, low mass plant growth chambers, and capability to operate in the high energy background radiation and reduced atmospheric pressures of space. These systems will be integrated with air, water, and thermal subsystems in an operational system. Extensive crop testing has been done for both staple and salad crops, but limited data is available on specific cultivar selection and breadboard testing to meet nominal Mars mission profiles of a 500-600 day surface mission. The recent research emphasis at Kennedy Space Center has shifted from staple crops, such as wheat, soybean and rice, toward short cycle salad crops such as lettuce, onion, radish, tomato, pepper, and strawberry. This paper will review the results of crop experiments to support the Exploration Initiative and the ongoing development of supporting technologies, and give an overview of capabilities of the newly opened Space Life Science (SLS) Lab at Kennedy Space Center. The 9662 square m (104,000 square ft) SLS Lab was built by the State of Florida and supports all NASA research that had been performed in Hanger-L. In addition to NASA research, the SLS Lab houses the Florida Space Research Institute (FSRI), responsible for co-managing the facility, and the University of Florida (UF) has established the Space Agriculture and Biotechnology Research and

  13. reliability reliability

    African Journals Online (AJOL)

    eobe

    Corresponding author, Tel: +234-703. RELIABILITY .... V , , given by the code of practice. However, checks must .... an optimization procedure over the failure domain F corresponding .... of Concrete Members based on Utility Theory,. Technical ...

  14. Life support and euthanasia, a perspective on Shaw's new perspective.

    Science.gov (United States)

    Busch, Jacob; Rodogno, Raffaele

    2011-02-01

    It has recently been suggested by Shaw (2007) that the distinction between voluntary active euthanasia, such as giving a patient a lethal overdose with the intention of ending that patient's life, and voluntary passive euthanasia, such as removing a patient from a ventilator, is much less obvious than is commonly acknowledged in the literature. This is argued by suggesting a new perspective that more accurately reflects the moral features of end-of-life situations. The argument is simply that if we consider the body of a mentally competent patient who wants to die, a kind of 'unwarranted' life support, then the distinction collapses. We argue that all Shaw has provided is a perspective that makes the conclusion that there is little distinction between voluntary active euthanasia and voluntary passive euthanasia only seemingly more palatable. In doing so he has yet to convince us that this perspective is superior to other perspectives and thus more accurately reflects the moral features of the situations pertaining to this issue.

  15. Evolution of the Pediatric Advanced Life Support course: enhanced learning with a new debriefing tool and Web-based module for Pediatric Advanced Life Support instructors.

    Science.gov (United States)

    Cheng, Adam; Rodgers, David L; van der Jagt, Élise; Eppich, Walter; O'Donnell, John

    2012-09-01

    To describe the history of the Pediatric Advanced Life Support course and outline the new developments in instructor training that will impact the way debriefing is conducted during Pediatric Advanced Life Support courses. The Pediatric Advanced Life Support course, first released by the American Heart Association in 1988, has seen substantial growth and change over the past few decades. Over that time, Pediatric Advanced Life Support has become the standard for resuscitation training for pediatric healthcare providers in North America. The incorporation of high-fidelity simulation-based learning into the most recent version of Pediatric Advanced Life Support has helped to enhance the realism of scenarios and cases, but has also placed more emphasis on the importance of post scenario debriefing. We developed two new resources: an online debriefing module designed to introduce a new model of debriefing and a debriefing tool for real-time use during Pediatric Advanced Life Support courses, to enhance and standardize the quality of debriefing by Pediatric Advanced Life Support instructors. In this article, we review the history of Pediatric Advanced Life Support and Pediatric Advanced Life Support instructor training and discuss the development and implementation of the new debriefing module and debriefing tool for Pediatric Advanced Life Support instructors. The incorporation of the debriefing module and debriefing tool into the 2011 Pediatric Advanced Life Support instructor materials will help both new and existing Pediatric Advanced Life Support instructors develop and enhance their debriefing skills with the intention of improving the acquisition of knowledge and skills for Pediatric Advanced Life Support students.

  16. A dynamic particle filter-support vector regression method for reliability prediction

    International Nuclear Information System (INIS)

    Wei, Zhao; Tao, Tao; ZhuoShu, Ding; Zio, Enrico

    2013-01-01

    Support vector regression (SVR) has been applied to time series prediction and some works have demonstrated the feasibility of its use to forecast system reliability. For accuracy of reliability forecasting, the selection of SVR's parameters is important. The existing research works on SVR's parameters selection divide the example dataset into training and test subsets, and tune the parameters on the training data. However, these fixed parameters can lead to poor prediction capabilities if the data of the test subset differ significantly from those of training. Differently, the novel method proposed in this paper uses particle filtering to estimate the SVR model parameters according to the whole measurement sequence up to the last observation instance. By treating the SVR training model as the observation equation of a particle filter, our method allows updating the SVR model parameters dynamically when a new observation comes. Because of the adaptability of the parameters to dynamic data pattern, the new PF–SVR method has superior prediction performance over that of standard SVR. Four application results show that PF–SVR is more robust than SVR to the decrease of the number of training data and the change of initial SVR parameter values. Also, even if there are trends in the test data different from those in the training data, the method can capture the changes, correct the SVR parameters and obtain good predictions. -- Highlights: •A dynamic PF–SVR method is proposed to predict the system reliability. •The method can adjust the SVR parameters according to the change of data. •The method is robust to the size of training data and initial parameter values. •Some cases based on both artificial and real data are studied. •PF–SVR shows superior prediction performance over standard SVR

  17. Light, plants, and power for life support on Mars

    Science.gov (United States)

    Salisbury, F. B.; Dempster, W. F.; Allen, J. P.; Alling, A.; Bubenheim, D.; Nelson, M.; Silverstone, S.

    2002-01-01

    Regardless of how well other growing conditions are optimized, crop yields will be limited by the available light up to saturation irradiances. Considering the various factors of clouds on Earth, dust storms on Mars, thickness of atmosphere, and relative orbits, there is roughly 2/3 as much light averaged annually on Mars as on Earth. On Mars, however, crops must be grown under controlled conditions (greenhouse or growth rooms). Because there presently exists no material that can safely be pressurized, insulated, and resist hazards of puncture and deterioration to create life support systems on Mars while allowing for sufficient natural light penetration as well, artificial light will have to be supplied. If high irradiance is provided for long daily photoperiods, the growing area can be reduced by a factor of 3-4 relative to the most efficient irradiance for cereal crops such as wheat and rice, and perhaps for some other crops. Only a small penalty in required energy will be incurred by such optimization. To obtain maximum yields, crops must be chosen that can utilize high irradiances. Factors that increase ability to convert high light into increased productivity include canopy architecture, high-yield index (harvest index), and long-day or day-neutral flowering and tuberization responses. Prototype life support systems such as Bios-3 in Siberia or the Mars on Earth Project need to be undertaken to test and further refine systems and parameters.

  18. System Engineering and Integration of Controls for Advanced Life Support

    Science.gov (United States)

    Overland, David; Hoo, Karlene; Ciskowski, Marvin

    2006-01-01

    The Advanced Integration Matrix (AIM) project at the Johnson Space Center (JSC) was chartered to study and solve systems-level integration issues for exploration missions. One of the first issues identified was an inability to conduct trade studies on control system architectures due to the absence of mature evaluation criteria. Such architectures are necessary to enable integration of regenerative life support systems. A team was formed to address issues concerning software and hardware architectures and system controls.. The team has investigated what is required to integrate controls for the types of non-linear dynamic systems encountered in advanced life support. To this end, a water processing bioreactor testbed is being developed which will enable prototyping and testing of integration strategies and technologies. Although systems such as the water bioreactors exhibit the complexities of interactions between control schemes most vividly, it is apparent that this behavior and its attendant risks will manifest itself among any set of interdependent autonomous control systems. A methodology for developing integration requirements for interdependent and autonomous systems is a goal of this team and this testbed. This paper is a high-level summary of the current status of the investigation, the issues encountered, some tentative conclusions, and the direction expected for further research.

  19. Reliability Analysis of RSG-GAS Primary Cooling System to Support Aging Management Program

    Science.gov (United States)

    Deswandri; Subekti, M.; Sunaryo, Geni Rina

    2018-02-01

    Multipurpose Research Reactor G.A. Siwabessy (RSG-GAS) which has been operating since 1987 is one of the main facilities on supporting research, development and application of nuclear energy programs in BATAN. Until now, the RSG-GAS research reactor has been successfully operated safely and securely. However, because it has been operating for nearly 30 years, the structures, systems and components (SSCs) from the reactor would have started experiencing an aging phase. The process of aging certainly causes a decrease in reliability and safe performances of the reactor, therefore the aging management program is needed to resolve the issues. One of the programs in the aging management is to evaluate the safety and reliability of the system and also screening the critical components to be managed.One method that can be used for such purposes is the Fault Tree Analysis (FTA). In this papers FTA method is used to screening the critical components in the RSG-GAS Primary Cooling System. The evaluation results showed that the primary isolation valves are the basic events which are dominant against the system failure.

  20. Ventilation Transport Trade Study for Future Space Suit Life Support Systems

    Science.gov (United States)

    Kempf, Robert; Vogel, Matthew; Paul, Heather L.

    2008-01-01

    A new and advanced portable life support system (PLSS) for space suit surface exploration will require a durable, compact, and energy efficient system to transport the ventilation stream through the space suit. Current space suits used by NASA circulate the ventilation stream via a ball-bearing supported centrifugal fan. As NASA enters the design phase for the next generation PLSS, it is necessary to evaluate available technologies to determine what improvements can be made in mass, volume, power, and reliability for a ventilation transport system. Several air movement devices already designed for commercial, military, and space applications are optimized in these areas and could be adapted for EVA use. This paper summarizes the efforts to identify and compare the latest fan and bearing technologies to determine candidates for the next generation PLSS.

  1. Challenges for Life Support Systems in Space Environments, Including Food Production

    Science.gov (United States)

    Wheeler, Raymond M.

    2012-01-01

    Environmental Control and Life Support Systems (ECLSS) refer to the technologies needed to sustain human life in space environments. Histor ically these technologies have focused on providing a breathable atmo sphere, clean water, food, managing wastes, and the associated monitoring capabilities. Depending on the space agency or program, ELCSS has sometimes expanded to include other aspects of managing space enviro nments, such as thermal control, radiation protection, fire detection I suppression, and habitat design. Other times, testing and providing these latter technologies have been associated with the vehicle engi neering. The choice of ECLSS technologies is typically driven by the mission profile and their associated costs and reliabilities. These co sts are largely defined by the mass, volume, power, and crew time req uirements. For missions close to Earth, e.g., low-Earth orbit flights, stowage and resupply of food, some 0 2, and some water are often the most cost effective option. But as missions venture further into spa ce, e.g., transit missions to Mars or asteroids, or surface missions to Moon or Mars, the supply line economics change and the need to clos e the loop on life support consumables increases. These are often ref erred to as closed loop or regenerative life support systems. Regardless of the technologies, the systems must be capable of operating in a space environment, which could include micro to fractional g setting s, high radiation levels, and tightly closed atmospheres, including perhaps reduced cabin pressures. Food production using photosynthetic o rganisms such as plants by nature also provides atmospheric regenerat ion (e.g., CO2 removal and reduction, and 0 2 production), yet to date such "bioregenerative" technologies have not been used due largely t o the high power requirements for lighting. A likely first step in te sting bioregenerative capabilities will involve production of small a mounts of fresh foods to supplement to crew

  2. Sustainable life support on Mars - the potential roles of cyanobacteria

    Science.gov (United States)

    Verseux, Cyprien; Baqué, Mickael; Lehto, Kirsi; de Vera, Jean-Pierre P.; Rothschild, Lynn J.; Billi, Daniela

    2016-01-01

    Even though technological advances could allow humans to reach Mars in the coming decades, launch costs prohibit the establishment of permanent manned outposts for which most consumables would be sent from Earth. This issue can be addressed by in situ resource utilization: producing part or all of these consumables on Mars, from local resources. Biological components are needed, among other reasons because various resources could be efficiently produced only by the use of biological systems. But most plants and microorganisms are unable to exploit Martian resources, and sending substrates from Earth to support their metabolism would strongly limit the cost-effectiveness and sustainability of their cultivation. However, resources needed to grow specific cyanobacteria are available on Mars due to their photosynthetic abilities, nitrogen-fixing activities and lithotrophic lifestyles. They could be used directly for various applications, including the production of food, fuel and oxygen, but also indirectly: products from their culture could support the growth of other organisms, opening the way to a wide range of life-support biological processes based on Martian resources. Here we give insights into how and why cyanobacteria could play a role in the development of self-sustainable manned outposts on Mars.

  3. Students' satisfaction to hybrid problem-based learning format for basic life support/advanced cardiac life support teaching.

    Science.gov (United States)

    Chilkoti, Geetanjali; Mohta, Medha; Wadhwa, Rachna; Saxena, Ashok Kumar; Sharma, Chhavi Sarabpreet; Shankar, Neelima

    2016-11-01

    Students are exposed to basic life support (BLS) and advanced cardiac life support (ACLS) training in the first semester in some medical colleges. The aim of this study was to compare students' satisfaction between lecture-based traditional method and hybrid problem-based learning (PBL) in BLS/ACLS teaching to undergraduate medical students. We conducted a questionnaire-based, cross-sectional survey among 118 1 st -year medical students from a university medical college in the city of New Delhi, India. We aimed to assess the students' satisfaction between lecture-based and hybrid-PBL method in BLS/ACLS teaching. Likert 5-point scale was used to assess students' satisfaction levels between the two teaching methods. Data were collected and scores regarding the students' satisfaction levels between these two teaching methods were analysed using a two-sided paired t -test. Most students preferred hybrid-PBL format over traditional lecture-based method in the following four aspects; learning and understanding, interest and motivation, training of personal abilities and being confident and satisfied with the teaching method ( P < 0.05). Implementation of hybrid-PBL format along with the lecture-based method in BLS/ACLS teaching provided high satisfaction among undergraduate medical students.

  4. QA support for TFTR reliability improvement program in preparation for DT operation

    International Nuclear Information System (INIS)

    Parsells, R.F.; Howard, H.P.

    1987-01-01

    As TFTR approaches experiments in the Q=1 regime, machine reliability becomes a major variable in achieving experimental objectives. This paper describes the methods used to quantify current reliability levels, levels required for D-T operations, proposed methods for reliability growth and improvement, and tracking of reliability performance in that growth. Included in this scope are data collection techniques and short comings, bounding current reliability on the upper end, and requirements for D-T operations. Problem characterization through Pareto diagrams provides insight into recurrent failure modes and the use of Duane plots for charting of reliability changes both cumulative and instantaneous, is explained and demonstrated

  5. Integration of lessons from recent research for "Earth to Mars" life support systems

    Science.gov (United States)

    Nelson, M.; Allen, J. P.; Alling, A.; Dempster, W. F.; Silverstone, S.; van Thillo, M.

    Development of reliable and robust strategies for long-term life support for mbox planetary exploration needs to be built on real-time experimentation to verify and improve system components Also critical is the incorporation of a range of viable options to handle potential short-term life system imbalances This paper revisits some of the conceptual framework for a Mars base prototype previously advanced Mars on Earth in the light of three years of experimentation by the authors in the Laboratory Biosphere further investigation of system alternatives and the advent of other innovative engineering and agri-ecosystem approaches Several experiments with candidate space agriculture crops have demonstrated the higher productivity possible with elevated light levels and improved environmental controls For example crops of sweet potatoes exceeded original Mars base prototype projections by 83 ultradwarf Apogee wheat by 27 pinto bean by 240 and cowpeas slightly exceeded anticipated dry bean yield These production levels although they may be increased with further optimization of lighting regimes environmental parameters crop density etc offer evidence that a soil-based system can be as productive as the hydroponic systems which have dominated space life support scenarios and research Soil also offers several distinct advantages the capability to be created using in-situ space resources reducing reliance on consumables and imported resources and more easily recycling and

  6. Mass balances for a biological life support system simulation model

    Science.gov (United States)

    Volk, Tyler; Rummel, John D.

    1987-01-01

    Design decisions to aid the development of future space based biological life support systems (BLSS) can be made with simulation models. The biochemistry stoichiometry was developed for: (1) protein, carbohydrate, fat, fiber, and lignin production in the edible and inedible parts of plants; (2) food consumption and production of organic solids in urine, feces, and wash water by the humans; and (3) operation of the waste processor. Flux values for all components are derived for a steady state system with wheat as the sole food source. The large scale dynamics of a materially closed (BLSS) computer model is described in a companion paper. An extension of this methodology can explore multifood systems and more complex biochemical dynamics while maintaining whole system closure as a focus.

  7. Reproducible analyses of microbial food for advanced life support systems

    Science.gov (United States)

    Petersen, Gene R.

    1988-01-01

    The use of yeasts in controlled ecological life support systems (CELSS) for microbial food regeneration in space required the accurate and reproducible analysis of intracellular carbohydrate and protein levels. The reproducible analysis of glycogen was a key element in estimating overall content of edibles in candidate yeast strains. Typical analytical methods for estimating glycogen in Saccharomyces were not found to be entirely aplicable to other candidate strains. Rigorous cell lysis coupled with acid/base fractionation followed by specific enzymatic glycogen analyses were required to obtain accurate results in two strains of Candida. A profile of edible fractions of these strains was then determined. The suitability of yeasts as food sources in CELSS food production processes is discussed.

  8. Automated Subsystem Control for Life Support System (ASCLSS)

    Science.gov (United States)

    Block, Roger F.

    1987-01-01

    The Automated Subsystem Control for Life Support Systems (ASCLSS) program has successfully developed and demonstrated a generic approach to the automation and control of space station subsystems. The automation system features a hierarchical and distributed real-time control architecture which places maximum controls authority at the lowest or process control level which enhances system autonomy. The ASCLSS demonstration system pioneered many automation and control concepts currently being considered in the space station data management system (DMS). Heavy emphasis is placed on controls hardware and software commonality implemented in accepted standards. The approach demonstrates successfully the application of real-time process and accountability with the subsystem or process developer. The ASCLSS system completely automates a space station subsystem (air revitalization group of the ASCLSS) which moves the crew/operator into a role of supervisory control authority. The ASCLSS program developed over 50 lessons learned which will aide future space station developers in the area of automation and controls..

  9. Certified Basic Life Support Instructors Assess Cardiopulmonary Resuscitation Skills Poorly

    DEFF Research Database (Denmark)

    Hansen, Camilla; Rasmussen, Stinne E; Kristensen, Mette Amalie

    2016-01-01

    Introduction: High-quality cardiopulmonary resuscitation (CPR) improves survival from cardiac arrest. During basic life support (BLS) training, instructors assess CPR skills to enhance learning outcome. Emergency department staff and senior residents have been shown to assess chest compression...... quality poorly. Currently no studies have evaluated CPR assessment among certified BLS instructors. The aim of this study was to investigate certified BLS instructors’ assessment of chest compressions and rescue breathing.Methods: Data were collected at BLS courses for medical students at Aarhus...... of CPR skills may be beneficial to ensure high-quality learning outcome.Author Disclosures: C. Hansen: None. S.E. Rasmussen: None. M.A. Nebsbjerg: None. M. Stærk: None. B. Løfgren: None....

  10. Microbiological characterization of a regenerative life support system

    Science.gov (United States)

    Koenig, D. W.; Bruce, R. J.; Mishra, S. K.; Barta, D. J.; Pierson, D. L.

    1994-01-01

    A Variable Pressure Plant Growth Chamber (VPGC), at the Johnson Space Center's (JSC) ground based Regenerative Life Support Systems (RLSS) test bed, was used to produce crops of soil-grown lettuce. The crops and chamber were analyzed for microbiological diversity during lettuce growth and after harvest. Bacterial counts for the rhizosphere, spent nutrient medium, heat exchanger condensate, and atmosphere were approximately 10(exp 11) Colony Forming Units (CFU)/g, 10(exp 5) CFU/ml, 10(exp 5)CFU/ml, and 600 CFU/m sq, repectively. Pseudomonas was the predominant bacterial genus. Numbers of fungi were about 10(exp 5) CFU/g in the rhizosphere, 4-200 CFU/ml in the spent nutient medium, 110 CFU/ml in the heat exchanger condensate, and 3 CFU/cu m in the atmosphere. Fusarium and Trichoderma were the predominant fungal genera.

  11. EARLY IDENTIFICATION AND BASIC LIFE SUPPORT FOR PNEUMOTHORAX

    Directory of Open Access Journals (Sweden)

    I Wayan Ade Punarbawa

    2013-04-01

    Full Text Available Chest injury is one injury that often occurs and need immediate and precise handling that prevent people from death. Chest trauma 1/4 of the trauma that caused the death and 1/3 of those deaths occur in hospitals. One chest injury that often we get to the health center is pneumothorax. WHO declared in 2020 the level of morbidity and mortality from chest injuries will increase, to become the second leading cause of death in the world. From this data that need to know the signs and symptoms of peneumotoraks, identify the signs and symptoms so we can provide basic life support to the patient before the patient was referred to a medical center nearby so as to reduce the morbidity and mortality in patients with pneumothorax.

  12. Reputation Life Cycle of The SM Foundation and Customers’ Support

    Directory of Open Access Journals (Sweden)

    Muhammad Alishahdani Ibrahim

    2012-12-01

    Full Text Available Reputation is a key construct in organizational sciences since reputation signals its past behavior and its prospect in the future. The purpose of this paper is to explore the development and influence of both personal and organizational reputation and its impact to customer support. The organiza-tion life cycle theory is applied to the “SM” foundation, one of Indonesian largest Islamic social enterprise which experienced fast growth and decline due to the decline of its leader reputation. The case shows that personal reputation of leader is very important in the start-up and early development phase of the organization but it may threaten the organizational sustainability at a later stage when the leader’s personal reputation is conveyed into the organization reputation.

  13. Reliable Fault Classification of Induction Motors Using Texture Feature Extraction and a Multiclass Support Vector Machine

    Directory of Open Access Journals (Sweden)

    Jia Uddin

    2014-01-01

    Full Text Available This paper proposes a method for the reliable fault detection and classification of induction motors using two-dimensional (2D texture features and a multiclass support vector machine (MCSVM. The proposed model first converts time-domain vibration signals to 2D gray images, resulting in texture patterns (or repetitive patterns, and extracts these texture features by generating the dominant neighborhood structure (DNS map. The principal component analysis (PCA is then used for the purpose of dimensionality reduction of the high-dimensional feature vector including the extracted texture features due to the fact that the high-dimensional feature vector can degrade classification performance, and this paper configures an effective feature vector including discriminative fault features for diagnosis. Finally, the proposed approach utilizes the one-against-all (OAA multiclass support vector machines (MCSVMs to identify induction motor failures. In this study, the Gaussian radial basis function kernel cooperates with OAA MCSVMs to deal with nonlinear fault features. Experimental results demonstrate that the proposed approach outperforms three state-of-the-art fault diagnosis algorithms in terms of fault classification accuracy, yielding an average classification accuracy of 100% even in noisy environments.

  14. Support Policies in Clusters: Prioritization of Support Needs by Cluster Members According to Cluster Life Cycle

    Directory of Open Access Journals (Sweden)

    Gulcin Salıngan

    2012-07-01

    Full Text Available Economic development has always been a moving target. Both the national and local governments have been facing the challenge of implementing the effective and efficient economic policy and program in order to best utilize their limited resources. One of the recent approaches in this area is called cluster-based economic analysis and strategy development. This study reviews key literature and some of the cluster based economic policies adopted by different governments. Based on this review, it proposes “the cluster life cycle” as a determining factor to identify the support requirements of clusters. A survey, designed based on literature review of International Cluster support programs, was conducted with 30 participants from 3 clusters with different maturity stage. This paper discusses the results of this study conducted among the cluster members in Eskişehir- Bilecik-Kütahya Region in Turkey on the requirement of the support to foster the development of related clusters.

  15. Human Reliability Analysis in Support of Risk Assessment for Positive Train Control

    Science.gov (United States)

    2003-06-01

    This report describes an approach to evaluating the reliability of human actions that are modeled in a probabilistic risk assessment : (PRA) of train control operations. This approach to human reliability analysis (HRA) has been applied in the case o...

  16. Economics and ethics of paediatric respiratory extra corporeal life support.

    Science.gov (United States)

    Callaghan, M; Doyle, Y; O'Hare, B; Healy, M; Nölke, L

    2013-09-01

    Extra corporeal membrane oxygenation (ECMO) is a form of life support, which facilitates gas exchange outside the body via an oxygenator and a centrifugal pumping system. A paediatric cardiac ECMO programme was established in 2005 at Our Lady's Children's Hospital, Crumlin (OLCHC) and to date 75 patients have received ECMO, the majority being post operative cardiac patients. The outcome data compares favourably with international figures. ECMO has been most successful in the treatment of newborn infants with life threatening respiratory failure from conditions such as meconium aspiration, respiratory distress syndrome and respiratory infections. There is no formal paediatric respiratory ECMO programme at OLCHC, or anywhere else in Ireland. Currently, neonates requiring respiratory ECMO are transferred to centres in Sweden or the UK at an average cost of 133,000 Euros/infant, funded by the Health Service Executive E112 treatment abroad scheme. There is considerable morbidity associated with the transfer of critically ill infants, as well as significant psycho-social impact on families. OLCHC is not funded to provide respiratory ECMO, although the equipment and expertise required are similar to cardiac ECMO and are currently in place. The average cost of an ECMO run at OLCHC is 65,000 Euros. There is now a strong argument for a fully funded single national cardiac and respiratory paediatric ECMO centre, similar to that for adult patients.

  17. Controlled Ecological Life Support Systems (CELSS) conceptual design option study

    Science.gov (United States)

    Oleson, Melvin; Olson, Richard L.

    1986-01-01

    Results are given of a study to explore options for the development of a Controlled Ecological Life Support System (CELSS) for a future Space Station. In addition, study results will benefit the design of other facilities such as the Life Sciences Research Facility, a ground-based CELSS demonstrator, and will be useful in planning longer range missions such as a lunar base or manned Mars mission. The objectives were to develop weight and cost estimates for one CELSS module selected from a set of preliminary plant growth unit (PGU) design options. Eleven Space Station CELSS module conceptual PGU designs were reviewed, components and subsystems identified and a sensitivity analysis performed. Areas where insufficient data is available were identified and divided into the categories of biological research, engineering research, and technology development. Topics which receive significant attention are lighting systems for the PGU, the use of automation within the CELSS system, and electric power requirements. Other areas examined include plant harvesting and processing, crop mix analysis, air circulation and atmosphere contaminant flow subsystems, thermal control considerations, utility routing including accessibility and maintenance, and nutrient subsystem design.

  18. Development of a Mars Environmental Control and Life Support System (ECLSS).

    Science.gov (United States)

    Henninger, Donald L.

    2016-01-01

    ECLS systems for very long-duration human missions to Mars will be designed to operate reliably for many years and will never be returned to Earth. The need for high reliability is driven by unsympathetic abort scenarios. Abort from a Mars mission could be as long as 450 days to return to Earth. Simply put, the goal of an ECLSS is to duplicate the functions the Earth provides in terms of human living and working on our home planet but without the benefit of the Earth's large buffers - the atmospheres, the oceans and land masses. With small buffers a space-based ECLSS must operate as a true dynamic system rather than independent processors taking things from tanks, processing them, and then returning them to product tanks. Key is a development process that allows for a logical sequence of validating successful development (maturation) in a stepwise manner with key performance parameters (KPPs) at each step; especially KPPs for technologies evaluated in a full systems context with human crews on Earth and on space platforms such as the ISS. This paper will explore the implications of such an approach to ECLSS development and the roles of ground and space-based testing necessary to develop a highly reliable life support system for long duration human exploration missions. Historical development and testing of ECLS systems from Mercury to the International Space Station (ISS) will be reviewed. Current work as well as recommendations for future work will be described.

  19. Reliability of a Novel Social Activity Questionnaire: Perceived Social Support and Verbal Interaction in the Wisconsin Registry for Alzheimer's Prevention.

    Science.gov (United States)

    Zuelsdorff, Megan L; Koscik, Rebecca L; Okonkwo, Ozioma C; Peppard, Paul E; Hermann, Bruce P; Sager, Mark A; Johnson, Sterling C; Engelman, Corinne D

    2018-02-01

    Social activity is associated with healthy aging and preserved cognition. Such activity includes a confluence of social support and verbal interaction, each influencing cognition through rarely parsed, mechanistically distinct pathways. We created a novel verbal interaction measure for the Wisconsin Registry for Alzheimer's Prevention (WRAP) and assessed reliability of resultant data, a first step toward mechanism-driven examination of social activity as a modifiable predictor of cognitive health. Two WRAP subsamples completed a test-retest study to determine 8-week stability ( n = 107) and 2-year stability ( n = 136) of verbal interaction, and 2-year stability of perceived social support. Reliability was determined using quadratic-weighted kappa, percent agreement, or correlation coefficients. Reliability was fair to almost perfect. The association between social support and interaction quantity decreased with age. Social activity data demonstrate moderate to excellent temporal stability. Moreover, in older individuals, social support and verbal interaction represent two distinct dimensions of social activity.

  20. Advanced Space Suit Portable Life Support Subsystem Packaging Design

    Science.gov (United States)

    Howe, Robert; Diep, Chuong; Barnett, Bob; Thomas, Gretchen; Rouen, Michael; Kobus, Jack

    2006-01-01

    This paper discusses the Portable Life Support Subsystem (PLSS) packaging design work done by the NASA and Hamilton Sundstrand in support of the 3 future space missions; Lunar, Mars and zero-g. The goal is to seek ways to reduce the weight of PLSS packaging, and at the same time, develop a packaging scheme that would make PLSS technology changes less costly than the current packaging methods. This study builds on the results of NASA s in-house 1998 study, which resulted in the "Flex PLSS" concept. For this study the present EMU schematic (low earth orbit) was used so that the work team could concentrate on the packaging. The Flex PLSS packaging is required to: protect, connect, and hold the PLSS and its components together internally and externally while providing access to PLSS components internally for maintenance and for technology change without extensive redesign impact. The goal of this study was two fold: 1. Bring the advanced space suit integrated Flex PLSS concept from its current state of development to a preliminary design level and build a proof of concept mockup of the proposed design, and; 2. "Design" a Design Process, which accommodates both the initial Flex PLSS design and the package modifications, required to accommodate new technology.

  1. Comparison of Online and Traditional Basic Life Support Renewal Training Methods for Registered Professional Nurses.

    Science.gov (United States)

    Serwetnyk, Tara M; Filmore, Kristi; VonBacho, Stephanie; Cole, Robert; Miterko, Cindy; Smith, Caitlin; Smith, Charlene M

    2015-01-01

    Basic Life Support certification for nursing staff is achieved through various training methods. This study compared three American Heart Association training methods for nurses seeking Basic Life Support renewal: a traditional classroom approach and two online options. Findings indicate that online methods for Basic Life Support renewal deliver cost and time savings, while maintaining positive learning outcomes, satisfaction, and confidence level of participants.

  2. Electrochemical Dehumidification and Life Support System, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — Sustainable Innovations has developed an innovative concept for highly efficient, reliable, potable water production based on technology from a commercial line of...

  3. Prehospital interventions for penetrating trauma victims: a prospective comparison between Advanced Life Support and Basic Life Support.

    Science.gov (United States)

    Seamon, Mark J; Doane, Stephen M; Gaughan, John P; Kulp, Heather; D'Andrea, Anthony P; Pathak, Abhijit S; Santora, Thomas A; Goldberg, Amy J; Wydro, Gerald C

    2013-05-01

    Advanced Life Support (ALS) providers may perform more invasive prehospital procedures, while Basic Life Support (BLS) providers offer stabilisation care and often "scoop and run". We hypothesised that prehospital interventions by urban ALS providers prolong prehospital time and decrease survival in penetrating trauma victims. We prospectively analysed 236 consecutive ambulance-transported, penetrating trauma patients an our urban Level-1 trauma centre (6/2008-12/2009). Inclusion criteria included ICU admission, length of stay >/=2 days, or in-hospital death. Demographics, clinical characteristics, and outcomes were compared between ALS and BLS patients. Single and multiple variable logistic regression analysis determined predictors of hospital survival. Of 236 patients, 71% were transported by ALS and 29% by BLS. When ALS and BLS patients were compared, no differences in age, penetrating mechanism, scene GCS score, Injury Severity Score, or need for emergency surgery were detected (p>0.05). Patients transported by ALS units more often underwent prehospital interventions (97% vs. 17%; p<0.01), including endotracheal intubation, needle thoracostomy, cervical collar, IV placement, and crystalloid resuscitation. While ALS ambulance on-scene time was significantly longer than that of BLS (p<0.01), total prehospital time was not (p=0.98) despite these prehospital interventions (1.8 ± 1.0 per ALS patient vs. 0.2 ± 0.5 per BLS patient; p<0.01). Overall, 69.5% ALS patients and 88.4% of BLS patients (p<0.01) survived to hospital discharge. Prehospital resuscitative interventions by ALS units performed on penetrating trauma patients may lengthen on-scene time but do not significantly increase total prehospital time. Regardless, these interventions did not appear to benefit our rapidly transported, urban penetrating trauma patients. Copyright © 2013 Elsevier Ltd. All rights reserved.

  4. Validity and reliability of the Korean version of the pediatric quality of life ESRD module

    Directory of Open Access Journals (Sweden)

    Park Ki-Soo

    2012-06-01

    Full Text Available Abstract Background Health-related quality of life is a very important issue in children with end-stage renal disease and their family. Moreover, this can be a lifelong problem. In this study, we performed a cross-sectional investigation of the health-related quality of life in Korean children, undergoing renal replacement therapies, such as dialysis and renal transplantation. Findings We validated the Korean version of the PedsQL 3.0 End-Stage Renal Disease Module by comparing with the PedsQL 4.0 Generic Core Scales. A total of 92 pediatric patients with end-stage renal disease, aged 2–18 year old, were enrolled in four teaching hospitals in Korea. The module was acceptable for both parent proxy-report and child self-report. The response rate was acceptable, since no reminders were delivered. A large proportion of the responders answered >90% of the items, which suggests a good face validity. The PedsQL 4.0 Generic Core Scales and the PedsQL 3.0 End-Stage Renal Disease Module showed minimal missing values in the current study, which supported feasibility. The validation analyses revealed acceptable floor and ceiling effects and an acceptable construct validity. Conclusions The PedsQL 3.0 End-stage Renal Disease Module may be useful as an end-stage renal disease -specific instrument in the evaluation of the health-related quality of life in Korean children; however, a larger, longitudinal prospective study is needed.

  5. Development of KSC program for investigating and generating field failure rates. Reliability handbook for ground support equipment

    Science.gov (United States)

    Bloomquist, C. E.; Kallmeyer, R. H.

    1972-01-01

    Field failure rates and confidence factors are presented for 88 identifiable components of the ground support equipment at the John F. Kennedy Space Center. For most of these, supplementary information regarding failure mode and cause is tabulated. Complete reliability assessments are included for three systems, eight subsystems, and nine generic piece-part classifications. Procedures for updating or augmenting the reliability results are also included.

  6. Seismic reliability assessment of RC structures including soil–structure interaction using wavelet weighted least squares support vector machine

    International Nuclear Information System (INIS)

    Khatibinia, Mohsen; Javad Fadaee, Mohammad; Salajegheh, Javad; Salajegheh, Eysa

    2013-01-01

    An efficient metamodeling framework in conjunction with the Monte-Carlo Simulation (MCS) is introduced to reduce the computational cost in seismic reliability assessment of existing RC structures. In order to achieve this purpose, the metamodel is designed by combining weighted least squares support vector machine (WLS-SVM) and a wavelet kernel function, called wavelet weighted least squares support vector machine (WWLS-SVM). In this study, the seismic reliability assessment of existing RC structures with consideration of soil–structure interaction (SSI) effects is investigated in accordance with Performance-Based Design (PBD). This study aims to incorporate the acceptable performance levels of PBD into reliability theory for comparing the obtained annual probability of non-performance with the target values for each performance level. The MCS method as the most reliable method is utilized to estimate the annual probability of failure associated with a given performance level in this study. In WWLS-SVM-based MCS, the structural seismic responses are accurately predicted by WWLS-SVM for reducing the computational cost. To show the efficiency and robustness of the proposed metamodel, two RC structures are studied. Numerical results demonstrate the efficiency and computational advantages of the proposed metamodel for the seismic reliability assessment of structures. Furthermore, the consideration of the SSI effects in the seismic reliability assessment of existing RC structures is compared to the fixed base model. It shows which SSI has the significant influence on the seismic reliability assessment of structures.

  7. Development of a support system to make economic and technical assessments for the issues relating to plant life extension

    International Nuclear Information System (INIS)

    Takao, T.; Soneda, N.; Sakai, T.

    1994-01-01

    To realize the life extension of nuclear power plants, overall evaluation for the plant is required, which covers technology, economy such as cost of repair or/and replacement of components, and regal regulations for licensing. A prototype of integrated assessment support system for life extension ''INPLEX'' have developed in order to evaluate the technical and economic issues relating to the plant life extension and to make a life extension scenario. Analysis procedure of INPLEX is as follows. A comparison of the cost between the life extension and the reconstruction is made to see whether the life extension is cost effective or not. Next, components required detailed assessments are selected, and the residual life assessment of these components are made. After those procedures life extension measures are selected and the implementation time schedule is set on the basis of the formulas for predicting the degradation of the components and the component reliability data. Finally the implementation time schedule is optimized from the viewpoint of economy, and the life extension scenario is proposed. INPLEX also has the data base ''PRINS'', in which information and data related to life extension are registered, such as component degradation experiences, degradation management methodologies, degradation mitigation measures, and so on. PRINS can be referred at any time during the operation of INPLEX

  8. Closed bioregenerative life support systems: Applicability to hot deserts

    Science.gov (United States)

    Polyakov, Yuriy S.; Musaev, Ibrahim; Polyakov, Sergey V.

    2010-09-01

    Water scarcity in hot deserts, which cover about one-fifth of the Earth's land area, along with rapid expansion of hot deserts into arable lands is one of the key global environmental problems. As hot deserts are extreme habitats characterized by the availability of solar energy with a nearly complete absence of organic life and water, space technology achievements in designing closed ecological systems may be applicable to the design of sustainable settlements in the deserts. This review discusses the key space technology findings for closed biogenerative life support systems (CBLSS), which can simultaneously produce food, water, nutrients, fertilizers, process wastes, and revitalize air, that can be applied to hot deserts. Among them are the closed cycle of water and the acceleration of the cycling times of carbon, biogenic compounds, and nutrients by adjusting the levels of light intensity, temperature, carbon dioxide, and air velocity over plant canopies. Enhanced growth of algae and duckweed at higher levels of carbon dioxide and light intensity can be important to provide complete water recycling and augment biomass production. The production of fertilizers and nutrients can be enhanced by applying the subsurface flow wetland technology and hyper-thermophilic aerobic bacteria for treating liquid and solid wastes. The mathematical models, optimization techniques, and non-invasive measuring techniques developed for CBLSS make it possible to monitor and optimize the performance of such closed ecological systems. The results of long-duration experiments performed in BIOS-3, Biosphere 2, Laboratory Biosphere, and other ground-based closed test facilities suggest that closed water cycle can be achieved in hot-desert bioregenerative systems using the pathways of evapotranspiration, condensation, and biological wastewater treatment technologies. We suggest that the state of the art in the CBLSS design along with the possibility of using direct sunlight for

  9. Reliability of the Music in Everyday Life (MEL) Scale: A Parent-Report Assessment for Children on the Autism Spectrum.

    Science.gov (United States)

    Gottfried, Tali; Thompson, Grace; Elefant, Cochavit; Gold, Christian

    2018-06-07

    For young children on the autism spectrum, the inclusion of shared parent-child music activities in everyday life may provide additional opportunities for social interactions in the home. However, no psychometrically validated assessment exists to measure the extent of shared music activity within family or community contexts. This study aimed to develop and test the reliability of a self-report assessment to measure the use of Music in Everyday Life (MEL) by parents with young children on the autism spectrum. A total of 45 mothers of children with autism aged between 4 and 7 years completed the MEL questionnaire. Internal consistency and item-total correlation were examined. Analysis confirmed the reliability of two predetermined subscales: Music in Everyday Life-Joint Activities using Music (MEL-JAM) and Music in Everyday Life-Routine Activities using Music (MEL-RAM). Internal consistency (Cronbach's alpha 0.63 and 0.75) and positive item-total correlation (Pearson's r between .23 to .62 for MEL-JAM and between .30 to .67 for MEL-RAM) were demonstrated. The reliability of the MEL assessment to measure the use of music in everyday life by parents with their children with autism was confirmed, filling an important gap in the availability of assessment tools.

  10. Bridging Human Reliability Analysis and Psychology, Part 2: A Cognitive Framework to Support HRA

    Energy Technology Data Exchange (ETDEWEB)

    April M. Whaley; Stacey M. L. Hendrickson; Ronald L. Boring; Jing Xing

    2012-06-01

    This is the second of two papers that discuss the literature review conducted as part of the U.S. Nuclear Regulatory Commission (NRC) effort to develop a hybrid human reliability analysis (HRA) method in response to Staff Requirements Memorandum (SRM) SRM-M061020. This review was conducted with the goal of strengthening the technical basis within psychology, cognitive science and human factors for the hybrid HRA method being proposed. An overview of the literature review approach and high-level structure is provided in the first paper, whereas this paper presents the results of the review. The psychological literature review encompassed research spanning the entirety of human cognition and performance, and consequently produced an extensive list of psychological processes, mechanisms, and factors that contribute to human performance. To make sense of this large amount of information, the results of the literature review were organized into a cognitive framework that identifies causes of failure of macrocognition in humans, and connects those proximate causes to psychological mechanisms and performance influencing factors (PIFs) that can lead to the failure. This cognitive framework can serve as a tool to inform HRA. Beyond this, however, the cognitive framework has the potential to also support addressing human performance issues identified in Human Factors applications.

  11. Feasibility, reliability and validity of the Thai version of the Pediatric Quality of Life Inventory 3.0 cerebral palsy module.

    Science.gov (United States)

    Tantilipikorn, Pinailug; Watter, Pauline; Prasertsukdee, Saipin

    2013-03-01

    Quality of Life (QOL) and Health-related Quality of Life (HRQOL) are now considered as necessary outcome measures for children with cerebral palsy (CP). Various reliable and valid condition-specific HRQOL tools are available for these children. One of these is Pediatric Quality of Life Inventory (PedsQL) 3.0 CP module which has been widely used and was translated to many languages. As no Thai version is available, the authors have completed this translation. This study then aimed to investigate psychometric properties of the newly translated Thai PedsQL 3.0 CP module and to establish parent confidence in their ratings in the translated tool. Translation of the PedsQL 3.0 CP module was performed based on linguistic translation guidelines. Then, the psychometric properties of the Thai version were established. PedsQL 3.0 CP module was completed by children with CP and their parents or caregivers twice with 2-4 weeks. Respondents were 97 parents or caregivers and 54 children. Minimal missing data were found. Acceptable internal consistency was supported except for Movement and Balance Scale (self-report). Intraclass correlation coefficients for parent proxy and self-report were good to excellent (0.684-0.950). The feasibility, reliability and validity of the translated tool were supported.

  12. Use of Intranasal Naloxone by Basic Life Support Providers.

    Science.gov (United States)

    Weiner, Scott G; Mitchell, Patricia M; Temin, Elizabeth S; Langlois, Breanne K; Dyer, K Sophia

    2017-01-01

    Intranasal delivery of naloxone to reverse the effects of opioid overdose by Advanced Life Support (ALS) providers has been studied in several prehospital settings. In 2006, in response to the increase in opioid-related overdoses, a special waiver from the state allowed administration of intranasal naloxone by Basic Life Support (BLS) providers in our city. This study aimed to determine: 1) if patients who received a 2-mg dose of nasal naloxone administered by BLS required repeat dosing while in the emergency department (ED), and 2) the disposition of these patients. This was a retrospective review of patients transported by an inner-city municipal ambulance service to one of three academic medical centers. We included patients aged 18 and older that were transported by ambulance between 1/1/2006 and 12/12/2012 and who received intranasal naloxone by BLS providers as per a state approved protocol. Site investigators matched EMS run data to patients from each hospital's EMR and performed a chart review to confirm that the patient was correctly identified and to record the outcomes of interest. Descriptive statistics were then generated. A total of 793 patients received nasal naloxone by BLS and were transported to three hospitals. ALS intervened and transported 116 (14.6%) patients, and 11 (1.4%) were intubated in the field. There were 724 (91.3%) patients successfully matched to an ED chart. Hospital A received 336 (46.4%) patients, Hospital B received 210 (29.0%) patients, and Hospital C received 178 (24.6%) patients. Mean age was 36.2 (SD 10.5) years and 522 (72.1%) were male; 702 (97.1%) were reported to have abused heroin while 21 (2.9%) used other opioids. Nasal naloxone had an effect per the prehospital record in 689 (95.2%) patients. An additional naloxone dose was given in the ED to 64 (8.8%) patients. ED dispositions were: 507 (70.0%) discharged, 105 (14.5%) admitted, and 112 (15.5%) other (e.g., left against medical advice, left without being seen, or

  13. Application of NASA's Advanced Life Support Technologies in Polar Regions

    Science.gov (United States)

    Bubenheim, David L.

    1997-01-01

    The problems of obtaining adequate pure drinking water and disposing of liquid and solid waste in the U.S Arctic, a region where virtually all water is frozen solid for much of the year, has led to unsanitary solutions. Sanitation and a safe water supply are particularly problems in rural villages. These villages are without running water and use plastic buckets for toilets. The outbreak of diseases is believed to be partially attributable to exposure to human waste and lack of sanitation. Villages with the most frequent outbreaks of disease are those in which running water is difficult to obtain. Waste is emptied into open lagoons, rivers, or onto the sea coast. It does not degrade rapidly and in addition to affecting human health, can be harmful to the fragile ecology of the Arctic and the indigenous wildlife and fish populations. Current practices for waste management and sanitation pose serious human hazards as well as threaten the environment. NASA's unique knowledge of water/wastewater treatment systems for extreme environments, identified in the Congressional Office of Technology Assessment report entitled An Alaskan Challenge: Native Villagt Sanitation, may offer practical solutions addressing the issues of safe drinking water and effective sanitation practices in rural villages. NASA's advanced life support technologies are being combined with Arctic science and engineering knowledge to address the unique needs of the remote communities of Alaska through the Advanced Life Systems for Extreme Environments (ALSEE) project. ALSEE is a collaborative effort involving the NASA, the State of Alaska, the University of Alaska, the North Slope Borough of Alaska, Ilisagvik College in Barrow and the National Science Foundation (NSF). The focus is a major issue in the State of Alaska and other areas of the Circumpolar North; the health and welfare of its people, their lives and the subsistence lifestyle in remote communities, economic opportunity, and care for the

  14. Subjective Quality of Life and Perceived Adequacy of Social Support ...

    African Journals Online (AJOL)

    Administrator

    psychological processes, socio-demographic factors and subjective quality of life have often .... function of religious involvement, spirituality and personal meaning in life ...... Unpublished MA Thesis: Department of Psychology, AAU. Baarsen ...

  15. The Life Cycle Cost (LCC) of Life Support Recycling and Resupply

    Science.gov (United States)

    Jones, Harry W.

    2015-01-01

    Brief human space missions supply all the crew's water and oxygen from Earth. The multiyear International Space Station (ISS) program instead uses physicochemical life support systems to recycle water and oxygen. This paper compares the Life Cycle Cost (LCC) of recycling to the LCC of resupply for potential future long duration human space missions. Recycling systems have high initial development costs but relatively low durationdependent support costs. This means that recycling is more cost effective for longer missions. Resupplying all the water and oxygen requires little initial development cost but has a much higher launch mass and launch cost. The cost of resupply increases as the mission duration increases. Resupply is therefore more cost effective than recycling for shorter missions. A recycling system pays for itself when the resupply LCC grows greater over time than the recycling LCC. The time when this occurs is called the recycling breakeven date. Recycling will cost very much less than resupply for long duration missions within the Earth-Moon system, such as a future space station or Moon base. But recycling would cost about the same as resupply for long duration deep space missions, such as a Mars trip. Because it is not possible to provide emergency supplies or quick return options on the way to Mars, more expensive redundant recycling systems will be needed.

  16. STUDENT ACADEMIC SUPPORT AS A PREDICTOR OF LIFE SATISFACTION IN UNIVERSITY STUDENTS

    OpenAIRE

    Ahmet Akýn; Serhat Arslan; Eyüp Çelik; Çýnar Kaya; Nihan Arslan

    2015-01-01

    The purpose of this study is to examine the relationship between Academic Support and Life Satisfaction. Participants were 458 university students who voluntarily filled out a package of self-report instruments. Student Academic Support Scale and Satisfaction with Life Scale were used as measures. The relationships between student academic support and life satisfaction were examined using correlation analysis and stepwise regression analysis. Life satisfaction was predicted positively by info...

  17. Awareness of basic life support among dental practitioners.

    Science.gov (United States)

    Baduni, Neha; Prakash, Prem; Srivastava, Dhirendra; Sanwal, Manoj Kumar; Singh, Bijender Pal

    2014-01-01

    It is important that every member of our community should be trained in effective BLS technique to save lives. At least doctors including dental practitioners, and medical and paramedical staff should be trained in high quality CPR, as it is a basic medical skill which can save many lives if implemented timely. Our aim was to study the awareness of Basic Life Support (BLS) among dental students and practitioners in New Delhi. This cross sectional study was conducted by assessing responses to 20 selected questions pertaining to BLS among dental students, resident doctors/tutors, faculty members and private practitioners in New Delhi. All participants were given a printed questionnaire where they had to mention their qualifications and clinical experience, apart from answering 20 questions. Data was collected and evaluated using commercially available statistical package for social sciences (SPSS version 12). One hundred and four responders were included. Sadly, none of our responders had complete knowledge about BLS. The maximum mean score (9.19 ± 1.23) was obtained by dentists with clinical experience between 1-5 years. To ensure better and safer healthcare, it is essential for all dental practitioners to be well versed with BLS.

  18. Reversible Ammonia Sorption for the Primary Life Support System (PLSS)

    Science.gov (United States)

    Wojtowicz, Marek A.; Cosgrove, Joseph E.; Serio, Michael A.; Jennings, Mallory A.

    2012-01-01

    Results are presented on the development of regenerable trace-contaminant (TC) sorbent for use in Extravehicular Activities (EVAs), and more specifically in the Primary Life Support System (PLSS). Since ammonia is the most important TC to be captured, data presented in this paper are limited to ammonia sorption, with results relevant to other TCs to be reported at a later time. The currently available TC-control technology involves the use of a packed bed of acid-impregnated granular charcoal. The sorbent is non-regenerable, and its use is associated with appreciable pressure drop, i.e. power consumption. The objective of this work is to demonstrate the feasibility of using vacuum-regenerable sorbents for PLSS application. In this study, several carbon sorbent monoliths were fabricated and tested. Multiple adsorption/vacuum-regeneration cycles were demonstrated at room temperature, as well as carbon surface conditioning that enhances ammonia sorption without impairing sorbent regeneration. Depending on sorbent monolith geometry, the reduction in pressure drop with respect to granular sorbent was found to be between 50% and two orders of magnitude. Resistive heating of the carbon sorbent monolith was demonstrated by applying voltage to the opposite ends of the monolith.

  19. Life cycle assessment in support of sustainable transportation

    Science.gov (United States)

    Eckelman, Matthew J.

    2013-06-01

    In our rapidly urbanizing world, sustainable transportation presents a major challenge. Transportation decisions have considerable direct impacts on urban society, both positive and negative, for example through changes in transit times and economic productivity, urban connectivity, tailpipe emissions and attendant air quality concerns, traffic accidents, and noise pollution. Much research has been dedicated to quantifying these direct impacts for various transportation modes. Transportation planning decisions also result in a variety of indirect environmental and human health impacts, a portion of which can accrue outside of the transit service area and so outside of the local decision-making process. Integrated modeling of direct and indirect impacts over the life cycle of different transportation modes provides decision support that is more comprehensive and less prone to triggering unintended consequences than a sole focus on direct tailpipe emissions. The recent work of Chester et al (2013) in this journal makes important contributions to this research by examining the environmental implications of introducing bus rapid transit and light rail in Los Angeles using life cycle assessment (LCA). Transport in the LA region is dominated by automobile trips, and the authors show that potential shifts to either bus or train modes would reduce energy use and emissions of criteria air pollutants, on an average passenger mile travelled basis. This work compares not just the use of each vehicle, but also upstream impacts from its manufacturing and maintenance, as well as the construction and maintenance of the entire infrastructure required for each mode. Previous work by the lead author (Chester and Horvath 2009), has shown that these non-operational sources and largely non-local can dominate life cycle impacts from transportation, again on an average (or attributional) basis, for example increasing rail-related GHG emissions by >150% over just operational emissions

  20. Effect of chest compressions only during experimental basic life support on alveolar collapse and recruitment.

    Science.gov (United States)

    Markstaller, Klaus; Rudolph, Annette; Karmrodt, Jens; Gervais, Hendrik W; Goetz, Rolf; Becher, Anja; David, Matthias; Kempski, Oliver S; Kauczor, Hans-Ulrich; Dick, Wolfgang F; Eberle, Balthasar

    2008-10-01

    The importance of ventilatory support during cardiac arrest and basic life support is controversial. This experimental study used dynamic computed tomography (CT) to assess the effects of chest compressions only during cardiopulmonary resuscitation (CCO-CPR) on alveolar recruitment and haemodynamic parameters in porcine model of ventricular fibrillation. Twelve anaesthetized pigs (26+/-1 kg) were randomly assigned to one of the following groups: (1) intermittent positive pressure ventilation (IPPV) both during basic life support and advanced cardiac life support, or (2) CCO during basic life support and IPPV during advanced cardiac life support. Measurements were acquired at baseline prior to cardiac arrest, during basic life support, during advanced life support, and after return of spontaneous circulation (ROSC), as follows: dynamic CT series, arterial and central venous pressures, blood gases, and regional organ blood flow. The ventilated and atelectatic lung area was quantified from dynamic CT images. Differences between groups were analyzed using the Kruskal-Wallis test, and a pbasic life support in the CCO-CPR group remained clinically relevant throughout the subsequent advanced cardiac life support period and following ROSC, and was associated with prolonged impaired haemodynamics. No inter-group differences in myocardial and cerebral blood flow were observed. A lack of ventilation during basic life support is associated with excessive atelectasis, arterial hypoxaemia and compromised CPR haemodynamics. Moreover, these detrimental effects remain evident even after restoration of IPPV.

  1. Validity and reliability of the Iranian version of the Pediatric Quality of Life Inventory™ 4.0 (PedsQL™ Generic Core Scales in children

    Directory of Open Access Journals (Sweden)

    Amiri Parisa

    2012-01-01

    Full Text Available Abstract Background This study aimed to investigate the reliability and validity of the Iranian version of the Pediatric Quality of Life Inventory™ 4.0 (PedsQL™ 4.0 Generic Core Scales in children. Methods A standard forward and backward translation procedure was used to translate the US English version of the PedsQL™ 4.0 Generic Core Scales for children into the Iranian language (Persian. The Iranian version of the PedsQL™ 4.0 Generic Core Scales was completed by 503 healthy and 22 chronically ill children aged 8-12 years and their parents. The reliability was evaluated using internal consistency. Known-groups discriminant comparisons were made, and exploratory factor analysis (EFA and confirmatory factor analysis (CFA were conducted. Results The internal consistency, as measured by Cronbach's alpha coefficients, exceeded the minimum reliability standard of 0.70. All monotrait-multimethod correlations were higher than multitrait-multimethod correlations. The intraclass correlation coefficients (ICC between the children self-report and parent proxy-reports showed moderate to high agreement. Exploratory factor analysis extracted six factors from the PedsQL™ 4.0 for both self and proxy reports, accounting for 47.9% and 54.8% of total variance, respectively. The results of the confirmatory factor analysis for 6-factor models for both self-report and proxy-report indicated acceptable fit for the proposed models. Regarding health status, as hypothesized from previous studies, healthy children reported significantly higher health-related quality of life than those with chronic illnesses. Conclusions The findings support the initial reliability and validity of the Iranian version of the PedsQL™ 4.0 as a generic instrument to measure health-related quality of life of children in Iran.

  2. Reliability and validity of a survey to measure bowel function and quality of life in long-term rectal cancer survivors.

    Science.gov (United States)

    Wendel, Christopher S; Grant, Marcia; Herrinton, Lisa; Temple, Larissa K F; Hornbrook, Mark C; McMullen, Carmit K; Bulkley, Joanna E; Altschuler, Andrea; Krouse, Robert S

    2014-12-01

    Examination of reliability and validity of a specialized health-related quality of life questionnaire for rectal cancer (RC) survivors (≥5 years post-diagnosis). We mailed 1,063 Kaiser Permanente (KP) RC survivors (313 ostomy and 750 anastomosis) a questionnaire containing the Modified City of Hope Quality of Life-Ostomy (mCOH-QOL-O), SF-12v2, Duke-UNC Functional Social Support Questionnaire (FSSQ), and Memorial Sloan-Kettering Cancer Center Bowel Function Index (BFI). We adapted certain BFI items for use by subjects with intestinal ostomies. We evaluated reliability for all instruments with inter-item correlations and Cronbach's alpha. We assessed construct validity only for the BFI in the ostomy group, because such use has not been reported. The overall response rate was 60.5 % (577 respondents/953 eligible). Compared with non-responders, participants were on average 2 years younger and more likely non-Hispanic white, resided in educationally non-deprived areas, and had KP membership through a group. The mCOH-QOL-O, SF-12, and FSSQ were found to be highly reliable for RC survivors. In the ostomy group, BFI Urgency/Soilage and Dietary subscales were found to be reliable, but Frequency was not. Factor analysis supported the construct of Urgency/Soilage and Dietary subscales in the ostomy group, although one item had a moderate correlation with all three factors. The BFI also demonstrated good concurrent validity with other instruments in the ostomy group. With possible exception of the BFI Frequency subscale in populations with ostomies, components of our survey can be used for the entire population of RC survivors, no matter whether they received anastomosis or ostomy.

  3. Teaching school children basic life support improves teaching and basic life support skills of medical students: A randomised, controlled trial.

    Science.gov (United States)

    Beck, Stefanie; Meier-Klages, Vivian; Michaelis, Maria; Sehner, Susanne; Harendza, Sigrid; Zöllner, Christian; Kubitz, Jens Christian

    2016-11-01

    The "kids save lives" joint-statement highlights the effectiveness of training all school children worldwide in cardiopulmonary resuscitation (CPR) to improve survival after cardiac arrest. The personnel requirement to implement this statement is high. Until now, no randomised controlled trial investigated if medical students benefit from their engagement in the BLS-education of school children regarding their later roles as physicians. The objective of the present study is to evaluate if medical students improve their teaching behaviour and CPR-skills by teaching school children in basic life support. The study is a randomised, single blind, controlled trial carried out with medical students during their final year. In total, 80 participants were allocated alternately to either the intervention or the control group. The intervention group participated in a CPR-instructor-course consisting of a 4h-preparatory seminar and a teaching-session in BLS for school children. The primary endpoints were effectiveness of teaching in an objective teaching examination and pass-rates in a simulated BLS-scenario. The 28 students who completed the CPR-instructor-course had significantly higher scores for effective teaching in five of eight dimensions and passed the BLS-assessment significantly more often than the 25 students of the control group (Odds Ratio (OR): 10.0; 95%-CI: 1.9-54.0; p=0.007). Active teaching of BLS improves teaching behaviour and resuscitation skills of students. Teaching school children in BLS may prepare medical students for their future role as a clinical teacher and support the implementation of the "kids save lives" statement on training all school children worldwide in BLS at the same time. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

  4. Aircraft Engine Life-Consumption Monitoring for Real-Time Reliability Determination, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — The object of this research is to develop an in-service life-monitor system for the prediction of the remaining component and system life of aircraft engines. The...

  5. Compact Water Vapor Exchanger for Regenerative Life Support Systems

    Science.gov (United States)

    Izenson, Michael G.; Chen, Weibo; Anderson, Molly; Hodgson, Edward

    2012-01-01

    Thermal and environmental control systems for future exploration spacecraft must meet challenging requirements for efficient operation and conservation of resources. Regenerative CO2 removal systems are attractive for these missions because they do not use consumable CO2 absorbers. However, these systems also absorb and vent water to space along with carbon dioxide. This paper describes an innovative device designed to minimize water lost from regenerative CO2 control systems. Design studies and proof-of-concept testing have shown the feasibility of a compact, efficient membrane water vapor exchanger (WVX) that will conserve water while meeting challenging requirements for operation on future spacecraft. Compared to conventional WVX designs, the innovative membrane WVX described here has the potential for high water recovery efficiency, compact size, and very low pressure losses. The key innovation is a method for maintaining highly uniform flow channels in a WVX core built from water-permeable membranes. The proof-of-concept WVX incorporates all the key design features of a prototypical unit, except that it is relatively small scale (1/23 relative to a unit sized for a crew of six) and some components were fabricated using non-prototypical methods. The proof-of-concept WVX achieved over 90% water recovery efficiency in a compact core in good agreement with analysis models. Furthermore the overall pressure drop is very small (less than 0.5 in. H2O, total for both flow streams) and meets requirements for service in environmental control and life support systems on future spacecraft. These results show that the WVX provides very uniform flow through flow channels for both the humid and dry streams. Measurements also show that CO2 diffusion through the water-permeable membranes will have negligible effect on the CO2 partial pressure in the spacecraft atmosphere.

  6. Extracorporeal life support in the treatment of colchicine poisoning.

    Science.gov (United States)

    Boisramé-Helms, Julie; Rahmani, Hassène; Stiel, Laure; Tournoud, Christine; Sauder, Philippe

    2015-01-01

    Ingestions of Colchicum autumnale may lead to severe poisoning. It begins with gastrointestinal symptoms and leukocytosis, followed by multi-organ failure with shock and a possible late recovery phase. Mortality is highly dependent on the ingested dose. We report a case of accidental C. autumnale poisoning with refractory cardiogenic shock and eventual survival after extracorporeal life support (ECLS). A 68-year-old woman was admitted to the intensive care unit (ICU) on day 3 after ingestion of C. autumnale in a meal. She first suffered from nausea and vomiting leading to severe dehydration. She then developed multi-organ failure and refractory cardiogenic shock, with a mean arterial pressure nadir of 50 mmHg despite high doses of catecholamines and a left ventricular ejection fraction at 5-10%. Venous-arterial ECLS was therefore started at an initial rate of 3.5 L/min and 3,800 rev/min. Her symptoms also included pancytopenia on day 4 with diffuse bleeding requiring iterative blood product transfusion. Platelet and leukocyte count nadirs were 13 × 10(9)/L (normal range: 150-400 × 10(9)/L) and 0.77 × 10(9)/L (normal range: 4.2-10.7 × 10(9)/L), respectively. ECLS allowed good cardiac contractility recovery within a few days, with complications including bleeding made controllable. Indeed, because of hemostasis disorders, the patient presented hemoptysis and hematuria. She was treated with tranexamic acid and transfused with blood products. She received 15 erythrocyte concentrates, 13 platelet concentrates, and 7 fresh frozen plasma. ECLS was removed by day 10, with subsequent weaning from mechanical ventilation as well as from hemodialysis in the following days. This patient survives after the use of ECLS in Colchicum poisoning, with controllable complications. Thus, ECLS might be indicated to overcome the potentially refractory cardiogenic shock phase.

  7. Evaluation of a newly developed media-supported 4-step approach for basic life support training

    Directory of Open Access Journals (Sweden)

    Sopka Saša

    2012-07-01

    Full Text Available Abstract Objective The quality of external chest compressions (ECC is of primary importance within basic life support (BLS. Recent guidelines delineate the so-called 4“-step approach” for teaching practical skills within resuscitation training guided by a certified instructor. The objective of this study was to evaluate whether a “media-supported 4-step approach” for BLS training leads to equal practical performance compared to the standard 4-step approach. Materials and methods After baseline testing, 220 laypersons were either trained using the widely accepted method for resuscitation training (4-step approach or using a newly created “media-supported 4-step approach”, both of equal duration. In this approach, steps 1 and 2 were ensured via a standardised self-produced podcast, which included all of the information regarding the BLS algorithm and resuscitation skills. Participants were tested on manikins in the same mock cardiac arrest single-rescuer scenario prior to intervention, after one week and after six months with respect to ECC-performance, and participants were surveyed about the approach. Results Participants (age 23 ± 11, 69% female reached comparable practical ECC performances in both groups, with no statistical difference. Even after six months, there was no difference detected in the quality of the initial assessment algorithm or delay concerning initiation of CPR. Overall, at least 99% of the intervention group (n = 99; mean 1.5 ± 0.8; 6-point Likert scale: 1 = completely agree, 6 = completely disagree agreed that the video provided an adequate introduction to BLS skills. Conclusions The “media-supported 4-step approach” leads to comparable practical ECC-performance compared to standard teaching, even with respect to retention of skills. Therefore, this approach could be useful in special educational settings where, for example, instructors’ resources are sparse or large-group sessions

  8. Life-sustaining support: ethical, cultural, and spiritual conflicts part I: Family support--a neonatal case study.

    Science.gov (United States)

    Stutts, Amy; Schloemann, Johanna

    2002-04-01

    As medical knowledge and technology continue to increase, so will types of life-sustaining support as well as the public's expectations for use of this support with positive outcomes. Health care professionals will continue to be challenged by the issues surrounding the appropriate use of life-sustaining support and the issues it raises. This is especially apparent in the NICU. When parents' belief systems challenge the health care team's ethical commitment to beneficence and nonmaleficence, a shared decision-making model based on mutual understanding of and respect for different viewpoints can redirect the focus onto the baby's best interest. This article addresses three questions: 1. How do nonmaleficence, beneficence, and concern about quality of life guide the use of life-sustaining support? 2. To what extent should parental autonomy and spirituality influence treatment decisions? 3. What efforts can the health care team make to support the family?

  9. Validity and reliability of questionnaires measuring physical activity self-efficacy, enjoyment, social support among Hong Kong Chinese children

    Science.gov (United States)

    Physical activity (PA) correlates have not been extensively studied in Hong Kong children. The aim of this study is to assess the validity and reliability of translated scales to measure PA related self-efficacy, enjoyment and social support in Hong Kong Chinese children. Sample 1 (n=273, aged 8–12 ...

  10. Root cause analysis in support of reliability enhancement of engineering components

    International Nuclear Information System (INIS)

    Kumar, Sachin; Mishra, Vivek; Joshi, N.S.; Varde, P.V.

    2014-01-01

    Reliability based methods have been widely used for the safety assessment of plant system, structures and components. These methods provide a quantitative estimation of system reliability but do not give insight into the failure mechanism. Understanding the failure mechanism is a must to avoid the recurrence of the events and enhancement of the system reliability. Root cause analysis provides a tool for gaining detailed insights into the causes of failure of component with particular attention to the identification of fault in component design, operation, surveillance, maintenance, training, procedures and policies which must be improved to prevent repetition of incidents. Root cause analysis also helps in developing Probabilistic Safety Analysis models. A probabilistic precursor study provides a complement to the root cause analysis approach in event analysis by focusing on how an event might have developed adversely. This paper discusses the root cause analysis methodologies and their application in the specific case studies for enhancement of system reliability. (author)

  11. Pilot testing of SHRP 2 reliability data and analytical products: Southern California. [supporting datasets

    Science.gov (United States)

    2014-01-01

    The objective of this project was to develop system designs for programs to monitor travel time reliability and to prepare a guidebook that practitioners and others can use to design, build, operate, and maintain such systems. Generally, such travel ...

  12. Reliable Autonomous Surface Mobility (RASM) in Support of Human Exploration, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — ProtoInnovations, LLC and Carnegie Mellon University have formed a partnership to commercially develop rover-autonomy technologies into Reliable Autonomous Surface...

  13. A novel ontology approach to support design for reliability considering environmental effects.

    Science.gov (United States)

    Sun, Bo; Li, Yu; Ye, Tianyuan; Ren, Yi

    2015-01-01

    Environmental effects are not considered sufficiently in product design. Reliability problems caused by environmental effects are very prominent. This paper proposes a method to apply ontology approach in product design. During product reliability design and analysis, environmental effects knowledge reusing is achieved. First, the relationship of environmental effects and product reliability is analyzed. Then environmental effects ontology to describe environmental effects domain knowledge is designed. Related concepts of environmental effects are formally defined by using the ontology approach. This model can be applied to arrange environmental effects knowledge in different environments. Finally, rubber seals used in the subhumid acid rain environment are taken as an example to illustrate ontological model application on reliability design and analysis.

  14. Effectiveness of different approaches to disseminating traveler information on travel time reliability. [supporting datasets

    Science.gov (United States)

    2013-11-30

    Travel time reliability information includes static data about traffic speeds or trip times that capture historic variations from day to day, and it can help individuals understand the level of variation in traffic. Unlike real-time travel time infor...

  15. The validity and reliability of Systemic Lupus Erythematosus Quality of Life Questionnaire (L-QoL) in a Turkish population.

    Science.gov (United States)

    Duruöz, M T; Unal, C; Toprak, C Sanal; Sezer, I; Yilmaz, F; Ulutatar, F; Atagündüz, P; Baklacioglu, H S

    2017-12-01

    Background Systemic lupus erythematosus (SLE) may have a profound impact on quality of life. There is increasing interest in measuring quality of life in lupus patients. The purpose of this study was to investigate the validity and reliability of SLE Quality of Life Questionnaire (L-QoL) in Turkish SLE patients. Methods SLE according to 2012 Systemic Lupus International Collaborating Clinics Classification Criteria were recruited into the study. Demographic data, clinical parameters and disease activity measured with the Systemic Lupus Erythematosus Disease Activity Index-2000 (SLEDAI-2K); were noted. Nottingham Health Profile and Health Assessment Questionnaire were filled out in addition to the Turkish L-QoL (LQoL-TR). Internal consistency, test-retest reliability, and convergent and discriminant validity were evaluated. Results The mean age of participants was 43.55 ± 14.33 years and the mean disease duration was 89.8 ± 92.1 months. The patients filled out LQoL-TR in 2.5 min. Strong correlation of LQoL-TR with all subgroups of the Nottingham Health Profile and the Health Assessment Questionnaire were established showing the convergent validity. The highest correlation was demonstrated with emotional reactions (rho = 0.72) and sleep component (rho = 0.65) of the Nottingham Health Profile scale ( p < 0.0001). Its poor and not significant correlation with nonfunctional parameters (age, disease duration, perceived general health, SLEDAI-2K) showed its discriminative properties. LQoL-TR demonstrated good internal reliability with a Cronbach's α of 0.93 and test-retest reliability with intraclass correlation coefficient of 0.87. Conclusion The LQoL-TR is a practical and useful tool which demonstrates good validity and reliability.

  16. The Toronto outcome measure for craniofacial prosthetics: reliability and validity of a condition-specific quality-of-life instrument.

    Science.gov (United States)

    Anderson, James D; Johnston, Dennis A; Haugh, Gil S; Kiat-Amnuay, Sudarat; Gettleman, Lawrence

    2013-01-01

    The purpose of this study was to refine the Toronto Outcome Measure for Craniofacial Prosthetics (TOMCP), present evidence for its reliability and validity, and use the instrument to explore differences in quality of life between prostheses made with chlorinated polyethylene (CPE) (experimental) and silicone (control). As part of a multicenter prospective controlled randomized double-blind single-crossover clinical trial of the two materials, the TOMCP was administered at the start and end of two 4-month study arms, during which 42 patients wore prostheses made from one material then the other. Reliability was assessed at the crossover. To determine validity of the TOMCP, the Linear Analogue Self-Assessment (LASA-12) and the Short-Form 8 (SF-8) were also administered with the TOMCP. The TOMCP was reduced by removing items that were unreliable, had poorly distributed answers, showed increased internal consistency after their removal, or were too highly correlated with more than one other item. The tests of reliability and validity were then repeated. Finally, the reduced instrument was used to test for differences in quality of life between prostheses made of the two materials. The item reduction tactics pared the 52-item instrument down to 27 items. The correlations of both TOMCP versions with the LASA-12 and the SF-8 were found to be statistically significant, providing evidence of the validity of the TOMCP. The instrument revealed significantly better quality of life with silicone rather than CPE prostheses. Both versions of the TOMCP were found to be reliable and valid. The instrument was able to show differences in quality of life between two materials.

  17. National Institute of Occupational Safety and Health (NIOSH) Partnered Development of Cryogenic Life Support Technologies

    Data.gov (United States)

    National Aeronautics and Space Administration — Cryogenic life support technology, used by NASA to protect crews working around hazardous gases soon could be called on for a number of life-saving applications as...

  18. Influences on Employee Perceptions of Organizational Work-Life Support: Signals and Resources

    Science.gov (United States)

    Valcour, Monique; Ollier-Malaterre, Ariane; Matz-Costa, Christina; Pitt-Catsouphes, Marcie; Brown, Melissa

    2011-01-01

    This study examined predictors of employee perceptions of organizational work-life support. Using organizational support theory and conservation of resources theory, we reasoned that workplace demands and resources shape employees' perceptions of work-life support through two mechanisms: signaling that the organization cares about their work-life…

  19. Grandmothers Raising Grandchildren with Disabilities: Sources of Support and Family Quality of Life

    Science.gov (United States)

    Kresak, Karen E.; Gallagher, Peggy A.; Kelley, Susan J.

    2014-01-01

    Sources of support and quality of life of 50 grandmother-headed families raising grandchildren with and without disabilities were examined. Comparative analyses revealed significant differences between grandmothers raising grandchildren with and without disabilities in regard to sources of support and family quality of life. Informal support was…

  20. Breastfeeding Support in the Workplace: The Relationships Among Breastfeeding Support, Work-Life Balance, and Job Satisfaction.

    Science.gov (United States)

    Jantzer, Amanda M; Anderson, Jenn; Kuehl, Rebecca A

    2018-05-01

    Women are increasingly faced with decisions about how to combine breastfeeding with work, but few researchers have directly measured how breastfeeding relates to the work-life interface. Research aim: The authors examined how perceptions of work enhancement of personal life and work interference with personal life were influenced by workplace breastfeeding support, including organizational, manager, and coworker support, as well as adequate time to express human milk. Then, we examined how workplace breastfeeding support predicted work-life variables and job satisfaction. Using a self-report, survey design, the authors analyzed online surveys from 87 women in a rural, community sample who indicated that they had pumped at work or anticipated needing to pump in the future. According to regression results, provision of workplace breastfeeding support, particularly providing adequate time for human milk expression, predicted work enhancement of personal life. Conversely, we found that as workplace support diminished, employees perceived greater work interference with personal life. Results of path analysis further suggested that providing time for expressing milk improved job satisfaction via a partially mediated relationship where work enhancement of personal life acted as a mediator. These results suggest that employers can enhance the lives of their breastfeeding employees both at work and at home by providing workplace breastfeeding support, especially through providing time for expressing human milk in the workplace.

  1. Some Aspects of Psychophysiological Support of Crew Member's Performance Reliability in Space Flight

    Science.gov (United States)

    Nechaev, A. P.; Myasnikov, V. I.; Stepanova, S. I.; Isaev, G. F.; Bronnikov, S. V.

    The history of cosmonautics demonstrates many instances in which only crewmembers' intervention allowed critical situations to be resolved, or catastrophes to be prevented. However, during "crew-spacecraft" system operation human is exposed by influence of numerous flight factors, and beforehand it is very difficult to predict their effects on his functional state and work capacity. So, the incidents are known when unfavorable alterations of crewmember's psychophysiological state (PPS) provoked errors in task performance. The objective of the present investigation was to substantiate the methodological approach directed to increase reliability of a crewmember performance (human error prevention) by means of management of his/her PPS. The specific aims of the investigation were: 1) to evaluate the statistical significance of the interrelation between crew errors (CE) and crewmember's PPS, and 2) to develop the way of PPS management. At present, there is no conventional method to assess combined effect of flight conditions (microgravity, confinement, psychosocial factors, etc.) on crewmembers' PPS. For this purpose experts of the Medical Support Group (psychoneurologists and psychologists) at the Moscow Mission Control Center analyze information received during radio and TV contacts with crew. Peculiarities of behavior, motor activity, sleep, speech, mood, emotional reactions, well-being and sensory sphere, trend of dominant interests and volitional acts, signs of deprivation phenomena are considered as separate indicators of crewmember's PPS. The set of qualitative symptoms reflecting PPS alterations and corresponding to them ratings (in arbitrary units) was empirically stated for each indicator. It is important to emphasize that symptoms characterizing more powerful PPS alterations have higher ratings. Quantitative value of PPS integral parameter is calculating by adding up the ratings of all separate indicators over a day, a week, or other temporal interval (in

  2. The Validity and Reliability Test of the Indonesian Version of Gastroesophageal Reflux Disease Quality of Life (GERD-QOL) Questionnaire.

    Science.gov (United States)

    Siahaan, Laura A; Syam, Ari F; Simadibrata, Marcellus; Setiati, Siti

    2017-01-01

    to obtain a valid and reliable GERD-QOL questionnaire for Indonesian application. at the initial stage, the GERD-QOL questionnaire was first translated into Indonesian language and the translated questionnaire was subsequently translated back into the original language (back-to-back translation). The results were evaluated by the researcher team and therefore, an Indonesian version of GERD-QOL questionnaire was developed. Ninety-one patients who had been clinically diagnosed with GERD based on the Montreal criteria were interviewed using the Indonesian version of GERD-QOL questionnaire and the SF 36 questionnaire. The validity was evaluated using a method of construct validity and external validity, and reliability can be tested by the method of internal consistency and test retest. the Indonesian version of GERD-QOL questionnaire had a good internal consistency reliability with a Cronbach Alpha of 0.687-0.842 and a good test retest reliability with an intra-class correlation coefficient of 0.756-0.936; pGERD-QOL questionnaire has been proven valid and reliable to evaluate the quality of life of GERD patients.

  3. [Development of social activities-related daily life satisfaction scale for the elderly and evaluation of its reliability and validity].

    Science.gov (United States)

    Okamoto, Hideaki

    2010-07-01

    The purpose of this study was to develop a Social Activities-Related Daily Life Satisfaction Scale specifically applicable to elderly people in communities and to evaluate its reliability and validity. Sixteen items were extracted from an initial pool and assessed for inclusion in the scale by correlation and exploratory factor analyses. To confirm validity, confirmatory factor analysis was conducted and correlation coefficients were calculated. In addition, t-tests were performed in order to generate scores of the subscale related to activity. To prove reliability, Cronbach's coefficient alpha values were calculated. Data for 755 older adults aged 65 to 84 years were obtained from a mail survey in Ichikawa City, Chiba Prefecture. Exploratory factor analyses indicated that four factors, "satisfaction with learning" (four items), "satisfaction with usefulness to others and society" (four items), "satisfaction with health and physical strength" (three items), and "satisfaction with friends" (three items) should be extracted. Confirmatory factor analysis for assessing the 14-item four-factor model showed high goodness of fit indices (GFI = 0.943, AGFI = 0.915, RMSEA = 0.068). Concurrent validity was established by comparing the score of the scale with five external variables (Activity and Daily Life Satisfaction Scale for the Elderly, Life Satisfaction Index K, etc). Student's t-tests revealed that each score of the subscale was positively associated with activity variable. The overall Cronbach's coefficient alpha for the scale was 0.919 and for its four subscales values ranged from 0.814 to 0.887. A Social Activities-Related Daily Life Satisfaction Scale was derived consisting of four subscales, "satisfaction with learning", "satisfaction with usefulness to others and society", "satisfaction with health and physical strength", and "satisfaction with friends". The results of the present study suggested that the Social Activities-Related Daily Life Satisfaction Scale

  4. Is Vitamin E Life Supporter for Gamma Irradiated Galleria Mollenella?

    International Nuclear Information System (INIS)

    Mohamed, H.F.

    2012-01-01

    This study conducted to determine the effect of vitamin E separate or combined with gamma ray in semi artificial diets on some biological aspects of the Greater wax moth, Galleria mellonella L. (Pyralidae : Lepidoptera). The increase in the average number of eggs per mated female for more than 70 % of the control in both treated male and female. Also, through the F1 generation (descendant of P1 progeny fed on artificial diet plus vitamin E) in either irradiated male or female at 100 and 300 Gy dose levels. The life supporter of vitamin E clearly demonstrates throughout F1 whose offspring fed on artificial diet plus Vitamin E, also more pronounced during the first generation treated with gamma irradiation (100 and 300 Gray) which descendant from the offspring were fed on the artificial diet containing Vitamin E (0.02%) than that treatments which treated with gamma irradiation only. The average weight of larvae and pupae significantly increase by using petroleum ether only or this may be abnormal. The average weight of larvae and pupae at the concentration 0.02% was 105.07 and 121.87 % from the control treatment, respectively then decreased to 67.86 and 75.12%, respectively from the control treatment at the concentration 0.04% and then increase at the two concentrations 0.06 and 0.08 %. The increase in weight gain in the case combined ( 100 Gy or 300 Gy with Vitamin E) more than in case using a single dose of gamma irradiation , the increase in case 300 Gy only or combined with Vitamin E more than the control treatment. The best result in case of Vitamin (E) only then when treated the pest with gamma radiation after Vitamin (E) and the effect at 100 Gy better than in case 300 Gy. The combined effect of sub sterilizing dose (300 Gy) and sterilizing doses (400 and 500 Gy) of gamma radiation and vitamin E on the mating competitiveness of F1 males G. Mellenella shows that the competitiveness values more than 1.0 at the combined VE and the two dose levels 400 and 500 Gy

  5. The perspective crops for the bioregenerative human life support systems

    Science.gov (United States)

    Polonskiy, Vadim; Polonskaya, Janna

    The perspective crops for the bioregenerative human life support systems V.I. Polonskiy, J.E. Polonskaya aKrasnoyarsk State Agrarian University, 660049, Krasnoyarsk, Russia In the nearest future the space missions will be too long. In this case it is necessary to provide the crew by vitamins, antioxidants, and water-soluble dietary fibers. These compounds will be produced by higher plants. There was not enough attention at present to increasing content of micronutrients in edible parts of crops candidates for CELSS. We suggested to add the new crops to this list. 1. Barley -is the best crop for including to food crops (wheat, rice, soybean). Many of the health effects of barley are connected to dietary fibers beta-glucan of barley grains. Bar-ley is the only seed from cereals including wheat with content of all eight tocopherols (vitamin E, important antioxidant). Barley grains contain much greater amounts of phenolic compounds (potential antioxidant activities) than other cereal grains. Considerable focus is on supplement-ing wheat-based breads with barley to introduce the inherent nutritional advantages of barley flour, currently only 20We have selected and tested during 5 generations two high productive barley lines -1-K-O and 25-K-O. Our investigations (special breeding program for improving grain quality of barley) are in progress. 2. Volatile crops. Young leaves and shoots of these crops are edible and have a piquant taste. A lot of organic volatile compounds, oils, vitamins, antioxidants are in their biomass. These micronutrients are useful for good appetite and health of the crew. We have investigated 11 species: basil (Ocimum basilicum), hyssop (Hyssopus officinalis), marjoram (Origanum majorana), sweet-Mary (Melissa officinalis), common thyme (Thymus vulgaris), creeping thyme (Thymus serpyllum), summer savory (Satureja hortensis), catnip (Nepeta cataria), rue (Ruta graveolens), coriander (Coriandrum Ativum), sulfurwort (Levisticum officinale). These

  6. Life Support and Environmental Monitoring International System Maturation Team Considerations

    Science.gov (United States)

    Anderson, Molly; Gatens, Robyn; Ikeda, Toshitami; Ito, Tsuyoshi; Hovland, Scott; Witt, Johannes

    2016-01-01

    Human exploration of the solar system is an ambitious goal. Future human missions to Mars or other planets will require the cooperation of many nations to be feasible. Exploration goals and concepts have been gathered by the International Space Exploration Coordination Group (ISECG) at a very high level, representing the overall goals and strategies of each participating space agency. The Global Exploration Roadmap published by ISECG states that international partnerships are part of what drives the mission scenarios. It states "Collaborations will be established at all levels (missions, capabilities, technologies), with various levels of interdependency among the partners." To make missions with interdependency successful, technologists and system experts need to share information early, before agencies have made concrete plans and binding agreements. This paper provides an overview of possible ways of integrating NASA, ESA, and JAXA work into a conceptual roadmap of life support and environmental monitoring capabilities for future exploration missions. Agencies may have immediate plans as well as long term goals or new ideas that are not part of official policy. But relationships between plans and capabilities may influence the strategies for the best ways to achieve partner goals. Without commitments and an organized program like the International Space Station, requirements for future missions are unclear. Experience from ISS has shown that standards and an early understanding of requirements are an important part of international partnerships. Attempting to integrate systems that were not designed together can create many problems. Several areas have been identified that could be important to discuss and understand early: units of measure, cabin CO2 levels, and the definition and description of fluids like high purity oxygen, potable water and residual biocide, and crew urine and urine pretreat. Each of the partners is exploring different kinds of technologies

  7. (abstract) Generic Modeling of a Life Support System for Process Technology Comparisons

    Science.gov (United States)

    Ferrall, J. F.; Seshan, P. K.; Rohatgi, N. K.; Ganapathi, G. B.

    1993-01-01

    This paper describes a simulation model called the Life Support Systems Analysis Simulation Tool (LiSSA-ST), the spreadsheet program called the Life Support Systems Analysis Trade Tool (LiSSA-TT), and the Generic Modular Flow Schematic (GMFS) modeling technique. Results of using the LiSSA-ST and the LiSSA-TT will be presented for comparing life support systems and process technology options for a Lunar Base and a Mars Exploration Mission.

  8. Phase Change Permeation Technology for Environmental Control & Life Support Systems

    Data.gov (United States)

    National Aeronautics and Space Administration — NASA is evaluating Dutyion™, a phase change permeation membrane technology developed by Design Technology and Irrigation (DTI), for use in future advanced life...

  9. Nanostructured Humidity Sensor for Spacecraft Life Support Systems, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — Humidity is a critical variable for monitoring and control on extended duration missions because it can affect the operation and efficiency of closed loop life...

  10. Technical assessment of Mir-1 life support hardware for the international space station

    Science.gov (United States)

    Mitchell, K. L.; Bagdigian, R. M.; Carrasquillo, R. L.; Carter, D. L.; Franks, G. D.; Holder, D. W., Jr.; Hutchens, C. F.; Ogle, K. Y.; Perry, J. L.; Ray, C. D.

    1994-01-01

    NASA has been progressively learning the design and performance of the Russian life support systems utilized in their Mir space station. In 1992, a plan was implemented to assess the benefits of the Mir-1 life support systems to the Freedom program. Three primary tasks focused on: evaluating the operational Mir-1 support technologies and understanding if specific Russian systems could be directly utilized on the American space station and if Russian technology design information could prove useful in improving the current design of the planned American life support equipment; evaluating the ongoing Russian life support technology development activities to determine areas of potential long-term application to the U.S. space station; and utilizing the expertise of their space station life support systems to evaluate the benefits to the current U.S. space station program which included the integration of the Russian Mir-1 designs with the U.S. designs to support a crew of six.

  11. Generic Modeling of a Life Support System for Process Technology Comparison

    Science.gov (United States)

    Ferrall, J. F.; Seshan, P. K.; Rohatgi, N. K.; Ganapathi, G. B.

    1993-01-01

    This paper describes a simulation model called the Life Support Systems Analysis Simulation Tool (LiSSA-ST), the spreadsheet program called the Life Support Systems Analysis Trade Tool (LiSSA-TT), and the Generic Modular Flow Schematic (GMFS) modeling technique. Results of using the LiSSA-ST and the LiSSA-TT will be presented for comparing life support system and process technology options for a Lunar Base with a crew size of 4 and mission lengths of 90 and 600 days. System configurations to minimize the life support system weight and power are explored.

  12. Pengaruh Persepsi Dukungan Organisasi Terhadap Work-Life Balance (The Influence of Perceived Organizational Support toward Work-Life Balance)

    OpenAIRE

    Sianturi, Elisabet Damayanti

    2017-01-01

    121301107 Work-life balance merupakan suatu keadaan dimana individu merasa terikat dan puas terhadap kehidupan pekerjaan dan kehidupan keluarganya. Salah satu faktor yang mempengaruhi work-life balance adalah organizational support (dukungan organisasi). Dalam hal ini, dukungan organisasi sangat penting karena ketersediaan dukungan terhadap karyawan dalam menjalankan perannya di tempat kerja dan keluarga akan membuat karyawan merasa bahwa organisasi memperhatikan kesejaht...

  13. Evaluation of research reactor fuel reliability in support of regulatory requirements

    International Nuclear Information System (INIS)

    Sokolov, Eugene N.

    2005-01-01

    This standards, codes and practices survey is devoted to the problem of reliability of R and D especially research reactor fuel (RRF) performance-related processes. Regulatory R and D evaluations were based on one standard and just few of them provide correlation to other relative standards whereas synthetic process approach reflects actual status of particular R and D practices. Fuel performance regulatory parameters are based on quality standards. A reliability process-based method similar to PSA/FMEA is proposed to evaluate RRF performance- related parameters in terms of reactor safety. (author)

  14. Evaluation of research reactor fuel reliability in support of regulatory requirements

    Energy Technology Data Exchange (ETDEWEB)

    Sokolov, Eugene N [Chalk River Laboratories, AECL, Chalk River, ON, K0J 1J0 (Canada)

    2005-07-01

    This standards, codes and practices survey is devoted to the problem of reliability of R and D especially research reactor fuel (RRF) performance-related processes. Regulatory R and D evaluations were based on one standard and just few of them provide correlation to other relative standards whereas synthetic process approach reflects actual status of particular R and D practices. Fuel performance regulatory parameters are based on quality standards. A reliability process-based method similar to PSA/FMEA is proposed to evaluate RRF performance- related parameters in terms of reactor safety. (author)

  15. Assessing Reliability of Cellulose Hydrolysis Models to Support Biofuel Process Design – Identifiability and Uncertainty Analysis

    DEFF Research Database (Denmark)

    Sin, Gürkan; Meyer, Anne S.; Gernaey, Krist

    2010-01-01

    The reliability of cellulose hydrolysis models is studied using the NREL model. An identifiability analysis revealed that only 6 out of 26 parameters are identifiable from the available data (typical hydrolysis experiments). Attempting to identify a higher number of parameters (as done in the ori......The reliability of cellulose hydrolysis models is studied using the NREL model. An identifiability analysis revealed that only 6 out of 26 parameters are identifiable from the available data (typical hydrolysis experiments). Attempting to identify a higher number of parameters (as done...

  16. Integration of lessons from recent research for “Earth to Mars” life support systems

    Science.gov (United States)

    Nelson, M.; Dempster, W. F.; Allen, J. P.

    Development of reliable and robust strategies for long-term life support for planetary exploration must be built from real-time experimentation to verify and improve system components. Also critical is incorporating a range of viable options to handle potential short-term life system imbalances. This paper revisits some of the conceptual framework for a Mars base prototype which has been developed by the authors along with others previously advanced ("Mars on Earth ®") in the light of three years of experimentation in the Laboratory Biosphere, further investigation of system alternatives and the advent of other innovative engineering and agri-ecosystem approaches. Several experiments with candidate space agriculture crops have demonstrated the higher productivity possible with elevated light levels and improved environmental controls. For example, crops of sweet potatoes exceeded original Mars base prototype projections by an average of 46% (53% for best crop) ultradwarf (Apogee) wheat by 9% (23% for best crop), pinto bean by 13% (31% for best crop). These production levels, although they may be increased with further optimization of lighting regimes, environmental parameters, crop density etc. offer evidence that a soil-based system can be as productive as the hydroponic systems which have dominated space life support scenarios and research. But soil also offers distinct advantages: the capability to be created on the Moon or Mars using in situ space resources, reduces long-term reliance on consumables and imported resources, and more readily recycling and incorporating crew and crop waste products. In addition, a living soil contains a complex microbial ecosystem which helps prevent the buildup of trace gases or compounds, and thus assist with air and water purification. The atmospheric dynamics of these crops were studied in the Laboratory Biosphere adding to the database necessary for managing the mixed stands of crops essential for supplying a nutritionally

  17. Designing high availability systems DFSS and classical reliability techniques with practical real life examples

    CERN Document Server

    Taylor, Zachary

    2014-01-01

    A practical, step-by-step guide to designing world-class, high availability systems using both classical and DFSS reliability techniques Whether designing telecom, aerospace, automotive, medical, financial, or public safety systems, every engineer aims for the utmost reliability and availability in the systems he, or she, designs. But between the dream of world-class performance and reality falls the shadow of complexities that can bedevil even the most rigorous design process. While there are an array of robust predictive engineering tools, there has been no single-source guide to understan

  18. Non-Parametric Bayesian Updating within the Assessment of Reliability for Offshore Wind Turbine Support Structures

    DEFF Research Database (Denmark)

    Ramirez, José Rangel; Sørensen, John Dalsgaard

    2011-01-01

    This work illustrates the updating and incorporation of information in the assessment of fatigue reliability for offshore wind turbine. The new information, coming from external and condition monitoring can be used to direct updating of the stochastic variables through a non-parametric Bayesian u...

  19. The relationship between family social support and quality of life in diabetic female patients

    Directory of Open Access Journals (Sweden)

    Ali Mousavi

    2017-06-01

    Full Text Available Life quality of diabetic patients is always affected by psychosocial problems, physical disorders, and life style changes. It seems that the perceived social support could intervene in improving the life quality of these patients. The present study was carried out aiming to examine the relation between family social support and life quality of female patients with diabetes. This was a cross-sectional study. The statistical population included 173 diabetic females who were randomly selected from patients referred to Kermanshah diabetes research center. Data were collected using life quality questionnaire (Short Form-36 as well as perceived social support scale. The data analysis indicated that there is a significant correlation between family support and life quality of patients. Furthermore, concerning the components of life quality, there is a significant correlation between family social support and physical performance, physical limitation, tiredness, emotional health, social performance, pain, and general health of patients. However, no significant relation was found between family support and limitation of patients. Results showed that there is a direct relation between family support and the life quality in females with diabetes. Hence, it can be concluded that giving the family support to the female diabetic patients can increase their quality of life.

  20. Time, Interaction, and Design in Support of a Good Life

    DEFF Research Database (Denmark)

    Froes, Isabel Cristina G.; Laaksolahti, Jarmo Matti; Witzner Hansen, Dan

    development. Our ongoing investigation of Interaction Design for a Good Life (http://itu.dk/IxDLab/) has uncovered a broad diversity of perspectives on how to unpack ‘a good life’ through research and design, and indeed what constitutes a good life to begin with. Through our investigations, time has surfaced...... as pivotal to our budding understanding of elements of a good life and a useful framing for future investigations. Time is also an important topic for interaction design, because it is at the core of interaction, the practice of design, and, in many ways, our use and relationships with technological......This position paper outlines a research program for the IxD Research Group at the IT University of Copenhagen. As such, it presents a range of questions addressing different corners of the question of time in IxD from the point of view of HCI, social interaction, material expressions, and software...

  1. Hydroponic cultivation of soybean for Bioregenerative Life Support Systems (BLSSs)

    Science.gov (United States)

    De Pascale, Stefania; De Micco, Veronica; Aronne, Giovanna; Paradiso, Roberta

    For long time our research group has been involved in experiments aiming to evaluate the possibility to cultivate plants in Space to regenerate resources and produce food. Apart from investigating the response of specific growth processes (at morpho-functional levels) to space factors (namely microgravity and ionising radiation), wide attention has been dedicated to agro-technologies applied to ecologically closed systems. Based on technical and human dietary requirements, soybean [Glycine max (L.) Merr.] is studied as one of the candidate species for hydroponic (soilless) cultivation in the research program MELiSSA (Micro-Ecological Life Support System Alternative) of the European Space Agency (ESA). Soybean seeds show high nutritional value, due to the relevant content of protein, lipids, dietary fiber and biologically active substances such as isoflavones. They can produce fresh sprouts or be transformed in several edible products (soymilk and okara or soy pulp). Soybean is traditionally grown in open field where specific interactions with soil microrganisms occur. Most available information on plant growth, seed productivity and nutrient composition relate to cultivated varieties (cultivars) selected for soil cultivation. However, in a space outpost, plant cultivation would rely on soilless systems. Given that plant growth, seed yield and quality strictly depend on the environmental conditions, to make successful the cultivation of soybean in space, it was necessary to screen all agronomic information according to space constraints. Indeed, selected cultivars have to comply with the space growth environment while providing a suitable nutritional quality to fulfill the astronauts needs. We proposed an objective criterion for the preliminary theoretical selection of the most suitable cultivars for seed production, which were subsequently evaluated in bench tests in hydroponics. Several Space-oriented experiments were carried out in a closed growth chamber to

  2. Modeling snail breeding in Bioregenerative Life Support System

    Science.gov (United States)

    Kovalev, Vladimir; Tikhomirov, Alexander A.; Nickolay Manukovsky, D..

    It is known that snail meat is a high quality food that is rich in protein. Hence, heliciculture or land snail farming spreads worldwide because it is a profitable business. The possibility to use the snails of Helix pomatia in Biological Life Support System (BLSS) was studied by Japanese Researches. In that study land snails were considered to be producers of animal protein. Also, snail breeding was an important part of waste processing, because snails were capable to eat the inedible plant biomass. As opposed to the agricultural snail farming, heliciculture in BLSS should be more carefully planned. The purpose of our work was to develop a model for snail breeding in BLSS that can predict mass flow rates in and out of snail facility. There are three linked parts in the model called “Stoichiometry”, “Population” and “Mass balance”, which are used in turn. Snail population is divided into 12 age groups from oviposition to one year. In the submodel “Stoichiometry” the individual snail growth and metabolism in each of 12 age groups are described with stoichiometry equations. Reactants are written on the left side of the equations, while products are written on the right side. Stoichiometry formulas of reactants and products consist of four chemical elements: C, H, O, N. The reactants are feed and oxygen, products are carbon dioxide, metabolic water, snail meat, shell, feces, slime and eggs. If formulas of substances in the stoichiometry equations are substituted with their molar masses, then stoichiometry equations are transformed to the equations of molar mass balance. To get the real mass balance of individual snail growth and metabolism one should multiply the value of each molar mass in the equations on the scale parameter, which is the ratio between mass of monthly consumed feed and molar mass of feed. Mass of monthly consumed feed and stoichiometry coefficients of formulas of meat, shell, feces, slime and eggs should be determined experimentally

  3. Developing Anticipatory Life Cycle Assessment Tools to Support Responsible Innovation

    Science.gov (United States)

    Wender, Benjamin

    Several prominent research strategy organizations recommend applying life cycle assessment (LCA) early in the development of emerging technologies. For example, the US Environmental Protection Agency, the National Research Council, the Department of Energy, and the National Nanotechnology Initiative identify the potential for LCA to inform research and development (R&D) of photovoltaics and products containing engineered nanomaterials (ENMs). In this capacity, application of LCA to emerging technologies may contribute to the growing movement for responsible research and innovation (RRI). However, existing LCA practices are largely retrospective and ill-suited to support the objectives of RRI. For example, barriers related to data availability, rapid technology change, and isolation of environmental from technical research inhibit application of LCA to developing technologies. This dissertation focuses on development of anticipatory LCA tools that incorporate elements of technology forecasting, provide robust explorations of uncertainty, and engage diverse innovation actors in overcoming retrospective approaches to environmental assessment and improvement of emerging technologies. Chapter one contextualizes current LCA practices within the growing literature articulating RRI and identifies the optimal place in the stage gate innovation model to apply LCA. Chapter one concludes with a call to develop anticipatory LCA---building on the theory of anticipatory governance---as a series of methodological improvements that seek to align LCA practices with the objectives of RRI. Chapter two provides a framework for anticipatory LCA, identifies where research from multiple disciplines informs LCA practice, and builds off the recommendations presented in the preceding chapter. Chapter two focuses on crystalline and thin film photovoltaics (PV) to illustrate the novel framework, in part because PV is an environmentally motivated technology undergoing extensive R&D efforts and

  4. Validity and reliability of the Portuguese version of the quality of life in epilepsy inventory (QOLIE-31) for Brazil.

    Science.gov (United States)

    da Silva, Tatiana Indelicato; Ciconelli, Rozana Mesquita; Alonso, Neide Barreira; Azevedo, Auro Mauro; Westphal-Guitti, Ana Carolina; Pascalicchio, Tatiana Frascarelli; Marques, Carolina Mattos; Caboclo, Luís Otávio Sales Ferreira; Cramer, Joyce A; Sakamoto, Américo Ceiki; Yacubian, Elza Márcia Targas

    2007-03-01

    We report the cultural adaptation and psychometric properties of the Quality of Life in Epilepsy-31 Inventory (QOLIE-31) for the Portuguese language and Brazilian culture. This study involved 150 outpatients: 50 presurgical patients with refractory temporal lobe epilepsy (TLE) related to mesial temporal sclerosis (MTS), 50 patients with juvenile myoclonic epilepsy (JME), and 50 seizure-free patients with TLE. They completed the QOLIE-31, Nottingham Health Profile (NHP), Beck Depression Inventory (BDI), and Adverse Events Profile (AEP) and underwent a neuropsychological evaluation (NE). Internal consistency reliability, interrater and test-retest reliability, and construct validity were assessed. QOLIE-31 mean scores were 33.1 (Social Function), 68.9 (Overall Quality of Life), 56.5 (Seizure Worry), 64.1 (Emotional Well-Being), 63.7 (Energy/Fatigue), 38.9 (Cognitive Function), and 49.7 (Medication Effects). Internal consistency was high (Cronbach's alpha), as were the associations between QOLIE-31 and the BDI, NHP, AEP, and NE. The Portuguese/Brazilian version of the QOLIE-31 inventory showed good reliability, validity, and construct validity.

  5. [Development and reliability evaluation of an instrument to measure health-related quality of life in independent elderly].

    Science.gov (United States)

    Lima, Maria José Barbosa de; Portela, Margareth Crisóstomo

    2010-08-01

    This study presents an instrument, the health-related quality of life (HRQOL) profile for independent elderly, to measure the health-related quality of life of the functionally independent elderly assisted in the outpatient setting, based on the adaptation of four validated scales: Short-Form Health Survey (SF-36), Duke-UNC Health Profile (DUHP), Sickness Impact Profile (SIP), and Nottingham Health Profile (NHP). The study also evaluates the instrument's reliability based on its use by two different observers with a 15-day interval. The instrument includes five dimensions (health perception, symptoms, physical function, psychological function, and social function) and 45 items. Reliability evaluation of the QUASI instrument was based on interviews with 142 elderly outpatients in the city of Rio de Janeiro, Brazil. Prevalence-adjusted kappa statistic was used to assess all 45 items. Correlation was also calculated between overall scores and scores on individual dimensions. In the reliability evaluation, 39 of the 45 items showed prevalence-adjusted kappa greater than 0.60.

  6. Successful outsourcing: improving quality of life through integrated support services.

    Science.gov (United States)

    Bates, Jason; Sharratt, Martin; King, John

    2014-01-01

    This article examines the way that non-clinical support services are provided in healthcare settings through outsourcing partnerships. The integrated support services model and benefits to patient experience and safety as well as organizational efficiency and effectiveness are explored through an examination of services at a busy urban community hospital.

  7. European top managers' support for work-life arrangements

    NARCIS (Netherlands)

    Been, W.M.|info:eu-repo/dai/nl/357424662

    2015-01-01

    In recent decades, work-life arrangements increasingly became an integral part of the organization of work. Arrangements such as telecommuting, flextime, part-time hours, and various types of leave arrangements are available to employees in many organizations. Top managers, such as CEOs, CFOs and

  8. Perceived social support and life satisfaction in persons with somatization disorder

    Directory of Open Access Journals (Sweden)

    Arif Ali

    2010-01-01

    Full Text Available Background: Life satisfaction and perceived social support been shown to improve the well-being of a person and also affect the outcome of treatment in somatization disorder. The phenomenon of somatization was explored in relation to the perceived social support and life satisfaction. Aim: This study aimed at investigating perceived social support and life satisfaction in people with somatization disorder. Materials and Methods: The study was conducted on persons having somatization disorder attending the outpatient unit of LGB Regional Institute of Mental Health, Tezpur, Assam. Satisfaction with life scale and multidimensional scale of perceived social support were used to assess life satisfaction and perceived social support respectively. Results: Women reported more somatic symptoms than men. Family perceived social support was high in the patient in comparison to significant others′ perceived social support and friends′ perceived social support. Perceived social support showed that a significant positive correlation was found with life satisfaction. Conclusion: Poor social support and low life satisfaction might be a stress response with regard to increased distress severity and psychosocial stressors rather than a cultural response to express psychological problems in somatic terms.

  9. A feasible, aesthetic quality evaluation of implant-supported single crowns: an analysis of validity and reliability

    DEFF Research Database (Denmark)

    Hosseini, Mandana; Gotfredsen, Klaus

    2012-01-01

    OBJECTIVES: To test the reliability and validity of six aesthetic parameters and to compare the professional- and patient-reported aesthetic outcomes. MATERIAL AND METHODS: Thirty-four patients with 66 implant-supported premolar crowns were included. Two prosthodontists and 11 dental students......,24) were found between patient and professional evaluations. CONCLUSIONS: The feasibility, reliability and validity of the CIS make the parameters useful for quality control of implant-supported restorations. The professional- and patient-reported aesthetic outcomes had no significant correlation....... and the internal consistency were analysed by Cohen's ¿ and Cronbach's a, respectively. The validity of CIS parameters was tested against the corresponding Visual Analogue Scales (VAS) scores. The Spearman correlation coefficients were used. Six aesthetic Oral Health Impact Profile (OHIP) questions were correlated...

  10. An Introduction To Reliability

    International Nuclear Information System (INIS)

    Park, Kyoung Su

    1993-08-01

    This book introduces reliability with definition of reliability, requirement of reliability, system of life cycle and reliability, reliability and failure rate such as summary, reliability characteristic, chance failure, failure rate which changes over time, failure mode, replacement, reliability in engineering design, reliability test over assumption of failure rate, and drawing of reliability data, prediction of system reliability, conservation of system, failure such as summary and failure relay and analysis of system safety.

  11. Social support in later life: family, friends and community

    Directory of Open Access Journals (Sweden)

    Claudia Josefina Arias

    2014-03-01

    Full Text Available This paper aims to carry out an analysis of the importance of social support and participation in old age. Contributions are presented first that various international agencies concerned with old age and aging have been made to strengthen this support and increased participation of older people. Different sources of social support are described: formal and informal interventions that can be made with varied promotion and preventive-wellness-care objectives and action at various levels-individual, group, family, organizational and community-and is made an analysis of the impact on the well-being have the resources of social support available to older people. Finally we reflect on Certain negative assumptions about the availability of support and social participation of older people in relation to recent research findings on the subject. Problematize the importance of these negative stereotypes about aging in general and on the participation and the availability of social support in particular in order to achieve more supportive environments that promote the development of the potential of older persons is concluded.

  12. Validity, reliability and support for implementation of independence-scaled procedural assessment in laparoscopic surgery.

    Science.gov (United States)

    Kramp, Kelvin H; van Det, Marc J; Veeger, Nic J G M; Pierie, Jean-Pierre E N

    2016-06-01

    There is no widely used method to evaluate procedure-specific laparoscopic skills. The first aim of this study was to develop a procedure-based assessment method. The second aim was to compare its validity, reliability and feasibility with currently available global rating scales (GRSs). An independence-scaled procedural assessment was created by linking the procedural key steps of the laparoscopic cholecystectomy to an independence scale. Subtitled and blinded videos of a novice, an intermediate and an almost competent trainee, were evaluated with GRSs (OSATS and GOALS) and the independence-scaled procedural assessment by seven surgeons, three senior trainees and six scrub nurses. Participants received a short introduction to the GRSs and independence-scaled procedural assessment before assessment. The validity was estimated with the Friedman and Wilcoxon test and the reliability with the intra-class correlation coefficient (ICC). A questionnaire was used to evaluate user opinion. Independence-scaled procedural assessment and GRS scores improved significantly with surgical experience (OSATS p = 0.001, GOALS p < 0.001, independence-scaled procedural assessment p < 0.001). The ICCs of the OSATS, GOALS and independence-scaled procedural assessment were 0.78, 0.74 and 0.84, respectively, among surgeons. The ICCs increased when the ratings of scrub nurses were added to those of the surgeons. The independence-scaled procedural assessment was not considered more of an administrative burden than the GRSs (p = 0.692). A procedural assessment created by combining procedural key steps to an independence scale is a valid, reliable and acceptable assessment instrument in surgery. In contrast to the GRSs, the reliability of the independence-scaled procedural assessment exceeded the threshold of 0.8, indicating that it can also be used for summative assessment. It furthermore seems that scrub nurses can assess the operative competence of surgical trainees.

  13. The Needs-Based Assessment of Parental (Guardian) Support: a test of its validity and reliability.

    Science.gov (United States)

    Bolen, Rebecca M; Leah Lamb, J; Gradante, Jennifer

    2002-10-01

    The purpose of this paper is to present a newly developed measure of guardian support, the Needs-Based Assessment of Parental (Guardian) Support (NAPS), an empirical evaluation of that measure, and its comparison with another measure of guardian support. The theoretical model that underlies this measure applies humanistic theory and Maslow's hierarchy of needs to the understanding of guardian support. The study employed a cross-sectional nonexperimental survey design using 183 nonoffending guardians who accompanied children presenting for a medical/forensic examination for sexual abuse. The NAPS and an existing measure of guardian support were administered during the hospital outpatient visit, and basic information concerning the child and abuse situations were gathered. The NAPS had robust psychometric properties and was culturally sensitive. Tests of specific hypotheses supported the construct validity of the measure and a conceptualization of guardian support as hierarchical, with four stages of support. The brevity and ease of administration of the NAPS for both the clinician and guardian suggest that it is a viable assessment tool. The strong support for the NAPS' underlying theoretical model suggests that the nonoffending guardians' available resources need to be considered when assessing guardian support.

  14. Reliability and efficiency upgrades of power systems operation by implementing intelligent electronic devices with synchrophasor measurement technology support

    Directory of Open Access Journals (Sweden)

    Mokeev Alexey

    2017-01-01

    Full Text Available This paper reviews issues of reliability and efficiency upgrades of power systems functions by means of a widespread implementation of intelligent electronic devices (IED in various purposes supporting synchrophasor measurement technology. Thus, such issues as IED’s operational analysis in the conditions of electromagnetic and electromechanical transient processes and synthesis of digital filters that improve static and dynamic responses of these devices play an important role in their development.

  15. Reliability and efficiency upgrades of power systems operation by implementing intelligent electronic devices with synchrophasor measurement technology support

    OpenAIRE

    Mokeev Alexey

    2017-01-01

    This paper reviews issues of reliability and efficiency upgrades of power systems functions by means of a widespread implementation of intelligent electronic devices (IED) in various purposes supporting synchrophasor measurement technology. Thus, such issues as IED’s operational analysis in the conditions of electromagnetic and electromechanical transient processes and synthesis of digital filters that improve static and dynamic responses of these devices play an important role in their devel...

  16. Mining protein interactomes to improve their reliability and support the advancement of network medicine

    KAUST Repository

    Alanis Lobato, Gregorio

    2015-09-23

    High-throughput detection of protein interactions has had a major impact in our understanding of the intricate molecular machinery underlying the living cell, and has permitted the construction of very large protein interactomes. The protein networks that are currently available are incomplete and a significant percentage of their interactions are false positives. Fortunately, the structural properties observed in good quality social or technological networks are also present in biological systems. This has encouraged the development of tools, to improve the reliability of protein networks and predict new interactions based merely on the topological characteristics of their components. Since diseases are rarely caused by the malfunction of a single protein, having a more complete and reliable interactome is crucial in order to identify groups of inter-related proteins involved in disease etiology. These system components can then be targeted with minimal collateral damage. In this article, an important number of network mining tools is reviewed, together with resources from which reliable protein interactomes can be constructed. In addition to the review, a few representative examples of how molecular and clinical data can be integrated to deepen our understanding of pathogenesis are discussed.

  17. Mining protein interactomes to improve their reliability and support the advancement of network medicine

    Directory of Open Access Journals (Sweden)

    Gregorio eAlanis-Lobato

    2015-09-01

    Full Text Available High-throughput detection of protein interactions has had a major impact in our understanding of the intricate molecular machinery underlying the living cell, and has permitted the construction of very large protein interactomes. The protein networks that are currently available are incomplete and a significant percentage of their interactions are false positives. Fortunately, the structural properties observed in good quality social or technological networks are also present in biological systems. This has encouraged the development of tools, to improve the reliability of protein networks and predict new interactions based merely on the topological characteristics of their components. Since diseases are rarely caused by the malfunction of a single protein, having a more complete and reliable interactome is crucial in order to identify groups of inter-related proteins involved in disease aetiology. These system components can then be targeted with minimal collateral damage. In this article, an important number of network mining tools is reviewed, together with resources from which reliable protein interactomes can be constructed. In addition to the review, a few representative examples of how molecular and clinical data can be integrated to deepen our understanding of pathogenesis are discussed.

  18. Reliability and validity of the PHQ-9 for screening late-life depression in Chinese primary care.

    Science.gov (United States)

    Chen, Shulin; Chiu, Helen; Xu, Baihua; Ma, Yan; Jin, Tao; Wu, Manhua; Conwell, Yeates

    2010-11-01

    The aim of this study was to examine the reliability and validation of the 9-item Patient Health Questionnaire (PHQ-9) for late-life depression in Chinese primary care. In the primary care clinics (PCCs) of Hangzhou city, we recruited 364 older patients (aged ≥ 60) for the PHQ-9 screening. Then 77 of them were further interviewed with Structured Clinical Interview for DSM Disorders (SCID) for the diagnosis of major depression in late life. Statistic strategies for the feasibility, reliability, validity, and receiver operating characteristic curve were performed. The mean administration time was 7.5 min, and the Cronbach's α was 0.91. The optimal cut-off score of PHQ-9 ≥ 9 revealed a sensitivity of 0.86, specificity of 0.77, and positive likelihood ratio of 5.73. The area under the curve (AUC) in this study was 0.92 (SD = 0.02, 95% CI 0.88-0.96). The PHQ-2 also revealed good sensitivity (0.84) and specificity (0.90) at the cut-off point ≥ 3. The PHQ-9 performs well and has acceptable psychometric properties for screening of patients with late-life depression in Chinese primary care settings.

  19. Reliability considerations in long-life outer planet spacecraft system design

    Science.gov (United States)

    Casani, E. K.

    1975-01-01

    A Mariner Jupiter/Saturn mission has been planned for 1977. System reliability questions are discussed, taking into account the actual and design lifetime, causes of mission termination, in-flight failures and their consequences for the mission, and the use of redundancy to avoid failures. The design process employed optimizes the use of proven subsystem and system designs and then makes the necessary improvements to increase the lifetime as required.

  20. First aid and basic life support of junior doctors: A prospective study in Nijmegen, the Netherlands.

    NARCIS (Netherlands)

    Tan, E.C.T.H.; Severien, I.; Metz, J.C.; Berden, H.J.J.M.; Biert, J.

    2006-01-01

    According to the Dutch medical education guidelines junior doctors are expected to be able to perform first aid and basic life support. A prospective study was undertaken to assess the level of first aid and basic life support (BLS) competence of junior doctors at the Radboud University Nijmegen

  1. [The level of first aid and basic life support for the next generation of physicians

    NARCIS (Netherlands)

    Severien, I.; Tan, E.C.T.H.; Metz, J.C.; Biert, J.; Berden, H.J.J.M.

    2005-01-01

    According to Dutch medical-education guidelines junior doctors are expected to be able to carry out first aid and basic life support. We determined the level of first aid and basic life support of junior doctors at the Radboud University Nijmegen Medical Centre, The Netherlands. Of the 300 junior

  2. Social Support and Optimism as Predictors of Life Satisfaction of College Students

    Science.gov (United States)

    Yalcin, Ilhan

    2011-01-01

    The purpose of this study was to investigate the predictive value of optimism, perceived support from family and perceived support from faculty in determining life satisfaction of college students in Turkey. One hundred and thirty three students completed the Satisfaction with Life Scale (Diener et al., Journal of Personality Assessment…

  3. A simulation based optimization approach to model and design life support systems for manned space missions

    Science.gov (United States)

    Aydogan, Selen

    This dissertation considers the problem of process synthesis and design of life-support systems for manned space missions. A life-support system is a set of technologies to support human life for short and long-term spaceflights, via providing the basic life-support elements, such as oxygen, potable water, and food. The design of the system needs to meet the crewmember demand for the basic life-support elements (products of the system) and it must process the loads generated by the crewmembers. The system is subject to a myriad of uncertainties because most of the technologies involved are still under development. The result is high levels of uncertainties in the estimates of the model parameters, such as recovery rates or process efficiencies. Moreover, due to the high recycle rates within the system, the uncertainties are amplified and propagated within the system, resulting in a complex problem. In this dissertation, two algorithms have been successfully developed to help making design decisions for life-support systems. The algorithms utilize a simulation-based optimization approach that combines a stochastic discrete-event simulation and a deterministic mathematical programming approach to generate multiple, unique realizations of the controlled evolution of the system. The timelines are analyzed using time series data mining techniques and statistical tools to determine the necessary technologies, their deployment schedules and capacities, and the necessary basic life-support element amounts to support crew life and activities for the mission duration.

  4. First-Generation Undergraduate Students' Social Support, Depression, and Life Satisfaction

    Science.gov (United States)

    Jenkins, Sharon Rae; Belanger, Aimee; Connally, Melissa Londono; Boals, Adriel; Duron, Kelly M.

    2013-01-01

    First-generation undergraduate students face challenging cross-socioeconomic cultural transitions into college life. The authors compared first- and non-first-generation undergraduate students' social support, posttraumatic stress, depression symptoms, and life satisfaction. First-generation participants reported less social support from family…

  5. Student Academic Support as a Predictor of Life Satisfaction in University Students

    Science.gov (United States)

    Akin, Ahmet; Arslan, Serhat; Çelik, Eyüp; Kaya, Çinar; Arslan, Nihan

    2015-01-01

    The purpose of this study is to examine the relationship between Academic Support and Life Satisfaction. Participants were 458 university students who voluntarily filled out a package of self-report instruments. Student Academic Support Scale and Satisfaction with Life Scale were used as measures. The relationships between student academic support…

  6. Work-Life Issues and Participation in Education and Training: Support Document

    Science.gov (United States)

    Skinner, Natalie

    2009-01-01

    This document serves as a support paper to the "Work-Life Issues and Participation in Education and Training" report. This support document contains tables that show: (1) participation in education and training; (2) participation in education and training and work-life interaction; (3) future participation in education or training; (4) perceptions…

  7. Arab Youth in Canada: Acculturation, Enculturation, Social Support, and Life Satisfaction

    Science.gov (United States)

    Paterson, Ashley D.; Hakim-Larson, Julie

    2012-01-01

    Results from 98 Arab youth in Canada showed that having a positive Arab culture orientation was related to greater family life satisfaction with family social support as a mediator. A positive European Canadian orientation was related to greater school life satisfaction, but this relation was not mediated by friend social support. Implications for…

  8. Quality of Life and Quality of Support for People with Severe Intellectual Disability and Complex Needs

    Science.gov (United States)

    Beadle-Brown, J.; Leigh, J.; Whelton, B.; Richardson, L.; Beecham, J.; Baumker, T.; Bradshaw, J.

    2016-01-01

    Background: People with severe and profound intellectual disabilities often spend substantial time isolated and disengaged. The nature and quality of the support appears to be important in determining quality of life. Methods: Structured observations and staff questionnaires were used to explore the quality of life and quality of support for 110…

  9. Design of an Instructional Module on Basic Life Support for Homeschooled Children

    Science.gov (United States)

    Awang, Sakinah; Ahmad, Shamsuria; Alias, Norlidah; DeWitt, Dorothy

    2016-01-01

    Basic Life Support (BLS) can increase a victim's chances of survival when administered promptly and correctly. Cardiac and respiratory arrests occur more frequently when the victim is at home far from clinical support. Hence, prompt action by family members trained in BLS can save the victim's life. In this study, the requirements for the design…

  10. Validity, reliability and responsiveness of the Body Image Quality of Life Inventory in patients treated for infective endocarditis

    DEFF Research Database (Denmark)

    Rasmussen, Trine Bernholdt; Konradsen, Hanne; Dixon, Jane

    2017-01-01

    been validated in this patient population. The purpose of this study was thus to assess the validity, reliability and responsiveness of the Danish Body Image Quality of Life Inventory (BIQLI-DA) on patients treated for IE. METHODS: We evaluated the psychometric properties of the BIQLI-DA on data......: The BIQLI-DA may be applicable in healthcare research as it seems to be valid, reliable and responsive; however, evidence should be strengthened through further exploration of instrument performance, particularly regarding responsiveness.......: Participants were seventy patients with a mean age of 58 years and of which 83% were men. Results indicated convergent construct validity by confirming hypothesised associations to potentially related constructs. The BIQLI-DA was found to be highly internally consistent with a Cronbach's alpha of 0...

  11. Gender Differences in Perceived Social Support and Stressful Life Events in Depressed Patients.

    Science.gov (United States)

    Soman, S; Bhat, S M; Latha, K S; Praharaj, S K

    2016-03-01

    To study the gender differences in perceived social support and life events in patients with depression. A total of 118 patients aged 18 to 60 years, with depressive disorder according to the DSM-IV-TR, were evaluated using the Multidimensional Scale of Perceived Social Support and Presumptive Stressful Life Events Scale. The perceived social support score was significantly higher in males than females (p friends than females (p life events as well as specific type of life events in males that became apparent after controlling for education (p life event in both males and females. Work-related problems were more commonly reported by males, whereas family and marital conflict were more frequently reported by females. Perceived social support and stressful life events were higher in males with depression than females.

  12. Social support mediates the association between benefit finding and quality of life in caregivers.

    Science.gov (United States)

    Brand, Charles; Barry, Lorna; Gallagher, Stephen

    2016-06-01

    The psychosocial pathways underlying associations between benefit finding and quality of life are poorly understood. Here, we examined associations between benefit finding, social support, optimism and quality of life in a sample of 84 caregivers. Results revealed that quality of life was predicted by benefit finding, optimism and social support. Moreover, the association between benefit finding and quality of life was explained by social support, but not optimism; caregivers who reported greater benefit finding perceived their social support be higher and this, in turn, had a positive effect on their overall quality of life. These results underscore the importance of harnessing benefit finding to enhance caregiver quality of life. © The Author(s) 2014.

  13. Validity and reliability of the Malay version multidimensional scale of perceived social support (MSPSS-M) among teachers.

    Science.gov (United States)

    Lee, Soo Cheng; Moy, Foong Ming; Hairi, Noran Naqiah

    2017-01-01

    The multidimensional scale of perceived social support (MSPSS) was developed to measure perceived social support. It has been translated and culturally adapted among natives literate in the Malay language. However, its psychometric properties for teachers who are majority females and married have not been assessed. This was a cross-sectional study conducted among the public secondary school teachers in the central region of Peninsular Malaysia from May to July 2013. A total of 150 and 203 teachers were recruited to perform exploratory factor analysis and confirmatory factor analysis (CFA), respectively. Reliability testing was evaluated on 141 teachers via internal consistency and two-week interval test-retest. The 12-item three-factor structure of MSPSS-M was revised to 8-item two-factor structure. The revised MSPSS-M demonstrated excellent fit in CFA with adequate divergent and convergent validity and good factor loadings (0.80-0.90). The revised MSPSS-M also displayed good internal consistency with Cronbach's alpha of 0.91, 0.93 and 0.92 and good test-retest reliability with intraclass correlation of 0.89, 0.88 and 0.88 in the total scale, family and friends factors, respectively. The revised 8-item MSPSS-M is a reliable and valid tool for assessment of perceived social support among teachers.

  14. Preliminary results of Physiological plant growth modelling for human life support in space

    Science.gov (United States)

    Sasidharan L, Swathy; Dussap, Claude-Gilles; Hezard, Pauline

    2012-07-01

    Human life support is fundamental and crucial in any kind of space explorations. MELiSSA project of European Space Agency aims at developing a closed, artificial ecological life support system involving human, plants and micro organisms. Consuming carbon dioxide and water from the life support system, plants grow in one of the chambers and convert it into food and oxygen along with potable water. The environmental conditions, nutrient availability and its consumption of plants should be studied and necessarily modeled to predict the amount of food, oxygen and water with respect to the environmental changes and limitations. The reliability of a completely closed system mainly depends on the control laws and strategies used. An efficient control can occur, only if the system to control is itself well known, described and ideally if the responses of the system to environmental changes are predictable. In this aspect, the general structure of plant growth model has been designed together with physiological modelling.The physiological model consists of metabolic models of leaves, stem and roots, of which concern specific metabolisms of the associated plant parts. On the basis of the carbon source transport (eg. sucrose) through stem, the metabolic models (leaf and root) can be interconnected to each other and finally coupled to obtain the entire plant model. For the first step, leaf metabolic model network was built using stoichiometric, mass and energy balanced metabolic equations under steady state approach considering all necessary plant pathways for growth and maintenance of leaves. As the experimental data for lettuce plants grown in closed and controlled environmental chambers were available, the leaf metabolic model has been established for lettuce leaves. The constructed metabolic network is analyzed using known stoichiometric metabolic technique called metabolic flux analysis (MFA). Though, the leaf metabolic model alone is not sufficient to achieve the

  15. Patient Assessment of Constipation Quality of Life Questionnaire: Translation, Cultural Adaptation, Reliability, and Validity of the Persian Version.

    Science.gov (United States)

    Nikjooy, Afsaneh; Jafari, Hassan; Saba, Maryam A; Ebrahimi, Naghmeh; Mirzaei, Rezvan

    2018-05-01

    The Patient Assessment of Constipation Quality of Life (PAC-QOL) questionnaire is the most validated and the most specific tool for measuring the quality of life of patients with constipation. Over 120 million people live in countries whose official language is Persian. There is no reported Persian version of the PAC-QOL questionnaire yet. The aim of this study was to translate and culturally adapt the PAC-QOL questionnaire and to assess its reliability and validity among Persian patients with chronic constipation. Following the translation and cultural adaptation of the PAC-QOL questionnaire to Persian, 100 patients (mean±SD age=40.51±13.67) with constipation were recruited for validity measurement and 20 patients were re-examined for reliability. Content validity was assessed based on the opinions of an expert committee and the floor/ceiling effect. Construct validity was evaluated according to the hypothesis test. The SF-36 questionnaire was used for concurrent criterion validity, intra-class correlation coefficient for reliability, and Cronbach's alpha for internal consistency. The content validity of the PAC-QOL questionnaire was proven, and there was no floor/ceiling effect. Construct validity also was confirmed based on the hypothesis test. The overall Cronbach's alpha of the PAC-QOL questionnaire was 0.92 (range=0.72-0.92), and the overall intra-class correlation coefficient of the questionnaire was 0.88 (range=0.69-0.87). The correlation between the SF-36 and PAC-QOL questionnaires was moderate. The Persian version of the PAC-QOL questionnaire demonstrated good validity and reliability properties in chronic constipation. Accordingly, Persian researchers and clinicians can benefit from this questionnaire in further research and assessment of treatment outcomes.

  16. Validity and reliability of the patient assessment of constipation quality of life questionnaire for the Turkish population.

    Science.gov (United States)

    Bengi, Göksel; Yalçın, Mustafa; Akpınar, Hale; Keskinoğlu, Pembe; Ellidokuz, Hülya

    2015-07-01

    There are few specific evaluation forms for evaluating the quality of life among patients with chronic constipation. Our study aimed to determine the validity and reliability of the translated Patient Assessment of Constipation Quality of Life (PAC-QOL) questionnaire for the Turkish population because evidence of its reliability and validity is required to justify its use in other studies and clinical practice. This study included 154 patients with constipation who were treated at the Department of Gastroenterology, Dokuz Eylül University Hospital between January and June 2012. The translated PAC-QOL questionnaire was completed by patients at the clinic and also at a 2-week follow-up to test its reliability. Cronbach's alpha coefficient (internal consistency) was 0.91 (good) for the translated PAC-QOL questionnaire. Time validity was evaluated using the intraclass correlation coefficient (ICC) method, and the ICC value for all questions was confirmed as 0.68 at the 2-week follow-up. The validity of the tool in the study group was evaluated using factor analysis, and the results were highly significant (Kaiser-Meyer-Olkin value: 0.857; Bartlett's test: p=0.001). Questions were categorized according to six factors based on the factor analysis, and these factors explained 65.1% of the total variation. For hypothesis verification of the tool, the correlation coefficient for PAC-QOL and PAC Symptoms (PAC-SYM) was r=0.577 (p<0.001), whereas the correlation coefficient for PAC-QOL and constipation severity score was r=0.457 (p<0.001). The PAC-QOL questionnaire was reliable, although not valid because of the limited sample group.

  17. Identification of fall risk predictors in daily life measurements: gait characteristics' reliability and association with self-reported fall history.

    Science.gov (United States)

    Rispens, Sietse M; van Schooten, Kimberley S; Pijnappels, Mirjam; Daffertshofer, Andreas; Beek, Peter J; van Dieën, Jaap H

    2015-01-01

    Background. Gait characteristics extracted from trunk accelerations during daily life locomotion are complementary to questionnaire- or laboratory-based gait and balance assessments and may help to improve fall risk prediction. Objective. The aim of this study was to identify gait characteristics that are associated with self-reported fall history and that can be reliably assessed based on ambulatory data collected during a single week. Methods. We analyzed 2 weeks of trunk acceleration data (DynaPort MoveMonitor, McRoberts) collected among 113 older adults (age range, 65-97 years). During episodes of locomotion, various gait characteristics were determined, including local dynamic stability, interstride variability, and several spectral features. For each characteristic, we performed a negative binomial regression analysis with the participants' self-reported number of falls in the preceding year as outcome. Reliability of gait characteristics was assessed in terms of intraclass correlations between both measurement weeks. Results. The percentages of spectral power below 0.7 Hz along the vertical and anteroposterior axes and below 10 Hz along the mediolateral axis, as well as local dynamic stability, local dynamic stability per stride, gait smoothness, and the amplitude and slope of the dominant frequency along the vertical axis, were associated with the number of falls in the preceding year and could be reliably assessed (all P 0.75). Conclusions. Daily life gait characteristics are associated with fall history in older adults and can be reliably estimated from a week of ambulatory trunk acceleration measurements. © The Author(s) 2014.

  18. Relationships among the perceived health status, family support and life satisfaction of older Korean adults.

    Science.gov (United States)

    Kim, Sook-Young; Sok, Sohyune R

    2012-08-01

    The objective of this study was to examine the perceived health status, family support and life satisfaction of older Korean adults and the relationships among them. This study was designed to be a descriptive correlation study using questionnaire. Subjects were 246 older people who were over 65 years of age in Seoul and Daegu metropolitan city, Korea. Measures were the Cornell Medical Index-Simple Korean Form to measure the perceived health status, the Family Support Instrument to measure the family support and the Standard Life Satisfaction Instrument for Korean people to measure the life satisfaction. Perceived health state was worse as average 3.3, family support was good as average 3.4 and life satisfaction was low as average 3.1. There were statistically significant positive correlations among perceived health state, family support and life satisfaction and between family support and life satisfaction. The predictors of life satisfaction in elderly were family support, age, monthly allowance and perceived health state. These factors explained 37.5% of the total variance. The major influencing factor was family support. This cross-sectional study provides preliminary evidence that to develop nursing strategy to increase family support of older Korean adults is needed. © 2012 Blackwell Publishing Asia Pty Ltd.

  19. Controlling RPV embrittlement through wet annealing in support of life attainment and life extension decisions

    International Nuclear Information System (INIS)

    Krasikov, E. A.

    2012-01-01

    As a main barrier against radioactivity outlet reactor pressure vessel (RPV) is a key component in terms of Nuclear Power Plant (NPP) safety. Therefore present-day demands in RPV reliability enhance have to be met by all possible actions for RPV in-service embrittlement mitigation. Annealing treatment is known to be the effective measure to restore the RPV metal properties deteriorated by neutron irradiation. Low temperature 'wet' annealing at a maximum coolant temperature which can be obtained using the reactor core or primary circuit pumps, although it cannot be expected to produce complete recovery, is more attractive from the practical point of view especially in cases when the removal of the internals is impossible. As a rule there is no recovery effect up to annealing and irradiation temperature difference of 70 deg. C. It is known, however, that along with radiation embrittlement neutron irradiation may mitigate the radiation damage in metals. Therefore we have tried to test the possibility to use the effect of radiation-induced ductilization in 'wet' annealing technology by means of nuclear heat utilization as heat and neutron irradiation sources at once. In support of the above-mentioned conception the 3-year duration reactor experiment on 15Cr3NiMoV type steel with preliminary irradiation at operating Pressurized Water Reactor (PWR) at 270 deg. C and following extra irradiation (87 h at 330 deg. C) at IR-8 test reactor was fulfilled. In fact, embrittlement was partly suppressed up to value equivalent to 1,5 fold neutron fluence decrease. The degree of recovery in case of radiation enhanced annealing is equal to 27% whereas furnace annealing results in zero effect under existing conditions. Mechanism of the radiation-induced damage mitigation is proposed. It is hoped that 'wet' annealing technology will help provide a better management of the RPV degradation as a factor affecting the lifetime of nuclear power plants which, together with associated

  20. Controlling RPV embrittlement through wet annealing in support of life attainment and life extension decisions

    International Nuclear Information System (INIS)

    Krasikov, E.A.

    2012-01-01

    As a main barrier against radioactivity outlet reactor pressure vessel (RPV) is a key component in terms of Nuclear Power Plant (NPP) safety. Therefore present-day demands in RPV reliability enhance have to be met by all possible actions for RPV in-service embrittlement mitigation. Annealing treatment is known to be the effective measure to restore the RPV metal properties deteriorated by neutron irradiation. Low temperature annealing at a maximum coolant temperature which can be obtained using the reactor core or primary circuit pumps, although it cannot be expected to produce complete recovery, is more attractive from the practical point of view especially in cases when the removal of the internals is impossible. As a rule there is no recovery effect up to annealing and irradiation temperature difference of 70 o C. It is known, however, that along with radiation embrittlement neutron irradiation may mitigate the radiation damage in metals. Therefore we have tried to test the possibility to use the effect of radiation-induced ductilization in annealing technology by means of nuclear heat utilization as heat and neutron irradiation sources at once. In support of the above-mentioned conception the 3-year duration reactor experiment on 15Cr3NiMoV type steel with preliminary irradiation at operating Pressurized Water Reactor (PWR) at 270 o C and following extra irradiation (87 h at 330 o C) at IR-8 test reactor was fulfilled. In fact, embrittlement was partly suppressed up to value equivalent to 1,5 fold neutron fluence decrease. The degree of recovery in case of radiation enhanced annealing is equal to 27% whereas furnace annealing results in zero effect under existing conditions. Mechanism of the radiation-induced damage mitigation is proposed. It is hoped that annealing technology will help provide a better management of the RPV degradation as a factor affecting the lifetime of nuclear power plants which, together with associated management methods, will help

  1. Controlling RPV embrittlement through wet annealing in support of life attainment and life extension decisions

    Energy Technology Data Exchange (ETDEWEB)

    Krasikov, E. A. [National Research Centre Kurchatov Inst., 1, Kurchatov Sq., Moscow, 123182 (Russian Federation)

    2012-07-01

    As a main barrier against radioactivity outlet reactor pressure vessel (RPV) is a key component in terms of Nuclear Power Plant (NPP) safety. Therefore present-day demands in RPV reliability enhance have to be met by all possible actions for RPV in-service embrittlement mitigation. Annealing treatment is known to be the effective measure to restore the RPV metal properties deteriorated by neutron irradiation. Low temperature 'wet' annealing at a maximum coolant temperature which can be obtained using the reactor core or primary circuit pumps, although it cannot be expected to produce complete recovery, is more attractive from the practical point of view especially in cases when the removal of the internals is impossible. As a rule there is no recovery effect up to annealing and irradiation temperature difference of 70 deg. C. It is known, however, that along with radiation embrittlement neutron irradiation may mitigate the radiation damage in metals. Therefore we have tried to test the possibility to use the effect of radiation-induced ductilization in 'wet' annealing technology by means of nuclear heat utilization as heat and neutron irradiation sources at once. In support of the above-mentioned conception the 3-year duration reactor experiment on 15Cr3NiMoV type steel with preliminary irradiation at operating Pressurized Water Reactor (PWR) at 270 deg. C and following extra irradiation (87 h at 330 deg. C) at IR-8 test reactor was fulfilled. In fact, embrittlement was partly suppressed up to value equivalent to 1,5 fold neutron fluence decrease. The degree of recovery in case of radiation enhanced annealing is equal to 27% whereas furnace annealing results in zero effect under existing conditions. Mechanism of the radiation-induced damage mitigation is proposed. It is hoped that 'wet' annealing technology will help provide a better management of the RPV degradation as a factor affecting the lifetime of nuclear power plants which

  2. Reliability and acceptability of the Multiple Sclerosis Quality of Life-29 questionnaire in an English-speaking cohort.

    Science.gov (United States)

    Baker, Georgina; Nair, Krishnan Padmakumari Sivaraman; Baster, Kathleen; Rosato, Rosalba; Solari, Alessandra

    2018-05-01

    Multiple Sclerosis Quality-of-Life Questionnaire-54 (MSQoL-54) is a disease-specific instrument for assessing health-related quality of life (HRQoL). Due to the number of items, the time taken to complete it is long. A shorter 29-item version, Multiple Sclerosis Quality-of-Life Questionnaire-29 (MSQoL-29) is yet to be evaluated in English. To assess reliability and acceptability of English version of MSQoL-29. Among 100 participants with MS who first completed both MSQoL-54 and MSQoL-29, 91 completed MSQoL-29 after 4-8 weeks. We looked for internal consistency (Cronbach's alpha), acceptability, reliability (intraclass correlation coefficients (ICCs)) and agreement (Bland-Altman plots). ICCs were strongly positive between MSQoL-54 and MSQoL-29 (Physical Health Composite (PHC) -ICC = 0.914, confidence interval (CI) = 0.872-0.942; Mental Health Composite (MHC) - ICC = 0.875, CI = 0.814-0.916) and between the two MSQoL-29 (PHC - ICC = 0.970, CI = 0.955-0.980; MHC - ICC = 0.937, CI = 0.904-0.958). On Bland-Altman plots, the MSQoL-29 scores of 95% of participants during two visits were within the limits of agreement (LOAs). Time taken to complete MSQoL-29 was 7.2 ± 2.9 minutes and MSQoL-54 was 19.79 ± 5.4 minutes ( p = 0.0001). MSQoL-29 has good test-retest reliability in English-speaking population and was quicker to complete.

  3. Life Prediction/Reliability Data of Glass-Ceramic Material Determined for Radome Applications

    Science.gov (United States)

    Choi, Sung R.; Gyekenyesi, John P.

    2002-01-01

    Brittle materials, ceramics, are candidate materials for a variety of structural applications for a wide range of temperatures. However, the process of slow crack growth, occurring in any loading configuration, limits the service life of structural components. Therefore, it is important to accurately determine the slow crack growth parameters required for component life prediction using an appropriate test methodology. This test methodology also should be useful in determining the influence of component processing and composition variables on the slow crack growth behavior of newly developed or existing materials, thereby allowing the component processing and composition to be tailored and optimized to specific needs. Through the American Society for Testing and Materials (ASTM), the authors recently developed two test methods to determine the life prediction parameters of ceramics. The two test standards, ASTM 1368 for room temperature and ASTM C 1465 for elevated temperatures, were published in the 2001 Annual Book of ASTM Standards, Vol. 15.01. Briefly, the test method employs constant stress-rate (or dynamic fatigue) testing to determine flexural strengths as a function of the applied stress rate. The merit of this test method lies in its simplicity: strengths are measured in a routine manner in flexure at four or more applied stress rates with an appropriate number of test specimens at each applied stress rate. The slow crack growth parameters necessary for life prediction are then determined from a simple relationship between the strength and the applied stress rate. Extensive life prediction testing was conducted at the NASA Glenn Research Center using the developed ASTM C 1368 test method to determine the life prediction parameters of a glass-ceramic material that the Navy will use for radome applications.

  4. R and D in support of CANDU plant life management

    International Nuclear Information System (INIS)

    Tapping, R.L.; Holt, R.A.

    1999-01-01

    One of the keys to the long-term success of CANDUs is a high capacity factor over the station design life. Considerable R and D in underway at AECL to develop technologies for assessing, monitoring and mitigating the effect of plant ageing and for improving plant performance and extending plant life. To achieve longer service life and to realize high capacity factor from CANDU stations, AECL is developing new technologies to enhance fuel channel and steam generator inspection capabilities, to monitor system health, and to allow preventive maintenance and cleaning (e.g., on-line chemical cleaning processes that produce small volumes of wastes). The life management strategy for fuel channels and steam generators requires a program to inspect components on a routine basis to identify mechanisms that could potentially affect fitness-for-service. In the case of fuel channels, the strategy includes inspections for dimensional changes, flaw detection, and deuterium concentration. New techniques are been developed to enhance these inspection capabilities; examples include accurate measurement of the gap between a pressure tube and its calandria tube and rapid full-length inspections of steam generator tubes for all known flaw types. Central to life management of components are Fitness-for-Service Guidelines (FFSG) that have been developed with the CANDU Owners Group (COG) that provide a standardized method to assess the potential for propagation of flaws detected during in-service inspections, and assessment of any change in fracture characteristics of the material. FFSG continue to be improved with the development of new technologies such as the capability to credit relaxation of stresses due to creep and non-rejectable flaws in pressure tubes. Effective management of plant systems throughout their lifetime requires much more than data acquisition and display - it requires that system health is continually monitored and managed. AECL has developed a system Health Monitor

  5. Perceived health status and life satisfaction in old age, and the moderating role of social support.

    Science.gov (United States)

    Dumitrache, Cristina G; Rubio, Laura; Rubio-Herrera, Ramona

    2017-07-01

    The aim of this study was on one hand to examine the associations between health impairment and life satisfaction, as well as social support and life satisfaction, and on the other, to analyze the moderating effect of social support with regard to health impairment and life satisfaction in a sample of community-dwelling older adults from urban areas of Granada, southern Spain. This was a cross-sectional survey in which a sample of 406 older adults with ages between 65 and 99 years old (M age = 74.88, SD = 6.75) was selected. Multiple stepwise regression analysis was used to assess the impact of health impairment and perceived social support on life satisfaction. Moderation analysis was performed using the bias-corrected and accelerated bootstrapping approach. Significant differences in life satisfaction scores were found by number and type of disease, restrictions in daily life activities and subjective health. Perceived health and perceived social support predicted life satisfaction. Besides global social support, emotional and affectionate support moderated the link between perceived health and life satisfaction. Older people who do not rate their health status positively and indicate low levels of social support have a higher risk of being dissatisfied with their lives and due to this they should receive special attention from gerontologists.

  6. Surfacing the life phases of a mental health support group.

    Science.gov (United States)

    Mohr, Wanda K

    2004-01-01

    Support groups have increased rapidly in number and become a viable alternative to formal treatment in the United States. However, little is known regarding how mental health advocacy or support groups start and develop, or about challenges that can threaten their survival. In this 2 1/2-year ethnography, the author studied the culture of a developing family support program associated with a system of care. Several phases emerged, reflecting an organizational dynamic. The group dynamics and response to challenges have implications for organizers and parent organizations about the need for technical assistance necessary for survival of the group. Participant observation and immersion in the culture of such groups can provide a deeper understanding of the ideologies and values around which they organize and the kinds of tensions that members can experience during the group's cycle.

  7. Is reciprocity always beneficial? Age differences in the association between support balance and life satisfaction.

    Science.gov (United States)

    Li, Tianyuan; Fok, Hung Kit; Fung, Helene H

    2011-07-01

    Reciprocity in support exchanges is believed to be beneficial to psychological well-being. This study examined perceived emotional and instrumental support balance from either family or friends, and the relationship between each support balance and life satisfaction among young and older adults. The sample included 107 older adults and 96 young adults. They rated their life satisfaction, as well as the emotional and instrumental support they provided to and received from family members and friends. Consistent with the socioemotional selectivity theory, age differences were found in perceived emotional support balance with friends. Older adults reported more emotionally reciprocal friendships than did young adults. Moreover, contrary to the equity rule, emotionally over-benefited friendships were associated with higher life satisfaction for older adults than were reciprocal friendships. Age, type of support, and source of support should be considered when studying the relationships between support balance and psychological well-being.

  8. Software reliability

    CERN Document Server

    Bendell, A

    1986-01-01

    Software Reliability reviews some fundamental issues of software reliability as well as the techniques, models, and metrics used to predict the reliability of software. Topics covered include fault avoidance, fault removal, and fault tolerance, along with statistical methods for the objective assessment of predictive accuracy. Development cost models and life-cycle cost models are also discussed. This book is divided into eight sections and begins with a chapter on adaptive modeling used to predict software reliability, followed by a discussion on failure rate in software reliability growth mo

  9. Real-Time Reliability Verification for UAV Flight Control System Supporting Airworthiness Certification.

    Science.gov (United States)

    Xu, Haiyang; Wang, Ping

    2016-01-01

    In order to verify the real-time reliability of unmanned aerial vehicle (UAV) flight control system and comply with the airworthiness certification standard, we proposed a model-based integration framework for modeling and verification of time property. Combining with the advantages of MARTE, this framework uses class diagram to create the static model of software system, and utilizes state chart to create the dynamic model. In term of the defined transformation rules, the MARTE model could be transformed to formal integrated model, and the different part of the model could also be verified by using existing formal tools. For the real-time specifications of software system, we also proposed a generating algorithm for temporal logic formula, which could automatically extract real-time property from time-sensitive live sequence chart (TLSC). Finally, we modeled the simplified flight control system of UAV to check its real-time property. The results showed that the framework could be used to create the system model, as well as precisely analyze and verify the real-time reliability of UAV flight control system.

  10. The environmental control and life support system advanced automation project

    Science.gov (United States)

    Dewberry, Brandon S.

    1991-01-01

    The objective of the ECLSS Advanced Automation project includes reduction of the risk associated with the integration of new, beneficial software techniques. Demonstrations of this software to baseline engineering and test personnel will show the benefits of these techniques. The advanced software will be integrated into ground testing and ground support facilities, familiarizing its usage by key personnel.

  11. Perceived Social Support And Life Satisfaction Of Residents In A Nursing Home In Turkey

    OpenAIRE

    Çimen, Mesut; Akbolat, Mahmut

    2016-01-01

    Abstract: This study was conducted to identify the factors that affect the perception of social support and life satisfaction of selected nursing home residents in Turkey, using the Multidimensional Scale of Perceived Social Support (MSPSS) and the Satisfaction with Life Scale (SWLS). 80 residents participated in the study. Results of univariate analyses indicated that family-based perceived social support of nursing home residents is significantly higher in married residents and in residents...

  12. The reliability, validity and responsiveness of the Thai version of Systemic Lupus Erythematosus Quality of Life (SLEQOL-TH) instrument.

    Science.gov (United States)

    Kasitanon, N; Wangkaew, S; Puntana, S; Sukitawut, W; Leong, K P; Louthrenoo, W

    2013-03-01

    The English version of the Systemic Lupus Erythematosus Quality of Life Questionnaire (SLEQOL) is a validated disease-specific quality of life instrument. The aim of this study was to evaluate the psychometric properties of the Thai version of the SLEQOL (SLEQOL-TH). Two independent translators translated the SLEQOL into Thai. The back translation of this version was performed by two other independent translators. The final version, SLEQOL-TH, was completed after resolving the discrepancies revealed by the back translation. One hundred and nine patients with SLE were enrolled to test the reliability, construct validity, floor and ceiling effects, and sensitivity to the changes of the SLEQOL-TH at six months. The differential item functioning (DIF) between the Thai and English versions was analyzed using the partial gamma. The internal consistency of the SLEQOL-TH was satisfactory with the overall Cronbach's alpha of 0.86. The test-retest reliability of the SLEQOL-TH was acceptable with the intra-class correlation coefficient of 0.86. Low correlations between the SLEQOL-TH and SLEDAI were observed. The total score of the SLEQOL-TH was moderately responsive to changes in quality of life, with a standardized response mean of 0.50. When comparing the SLEQOL-TH from Thai SLE patients with the original SLEQOL version obtained from Singapore SLE patients, 11 out of 40 items showed a moderate to large DIF. The SLEQOL-TH has acceptable psychometric properties and shows construct validity. In comparison with the English version of SLEQOL, there are some items that showed DIF. The applicability of the SLEQOL-TH in real-life clinical practice and clinical trials needs to be determined.

  13. Translation, Validation, and Reliability of the Dutch Late-Life Function and Disability Instrument Computer Adaptive Test.

    Science.gov (United States)

    Arensman, Remco M; Pisters, Martijn F; de Man-van Ginkel, Janneke M; Schuurmans, Marieke J; Jette, Alan M; de Bie, Rob A

    2016-09-01

    Adequate and user-friendly instruments for assessing physical function and disability in older adults are vital for estimating and predicting health care needs in clinical practice. The Late-Life Function and Disability Instrument Computer Adaptive Test (LLFDI-CAT) is a promising instrument for assessing physical function and disability in gerontology research and clinical practice. The aims of this study were: (1) to translate the LLFDI-CAT to the Dutch language and (2) to investigate its validity and reliability in a sample of older adults who spoke Dutch and dwelled in the community. For the assessment of validity of the LLFDI-CAT, a cross-sectional design was used. To assess reliability, measurement of the LLFDI-CAT was repeated in the same sample. The item bank of the LLFDI-CAT was translated with a forward-backward procedure. A sample of 54 older adults completed the LLFDI-CAT, World Health Organization Disability Assessment Schedule 2.0, RAND 36-Item Short-Form Health Survey physical functioning scale (10 items), and 10-Meter Walk Test. The LLFDI-CAT was repeated in 2 to 8 days (mean=4.5 days). Pearson's r and the intraclass correlation coefficient (ICC) (2,1) were calculated to assess validity, group-level reliability, and participant-level reliability. A correlation of .74 for the LLFDI-CAT function scale and the RAND 36-Item Short-Form Health Survey physical functioning scale (10 items) was found. The correlations of the LLFDI-CAT disability scale with the World Health Organization Disability Assessment Schedule 2.0 and the 10-Meter Walk Test were -.57 and -.53, respectively. The ICC (2,1) of the LLFDI-CAT function scale was .84, with a group-level reliability score of .85. The ICC (2,1) of the LLFDI-CAT disability scale was .76, with a group-level reliability score of .81. The high percentage of women in the study and the exclusion of older adults with recent joint replacement or hospitalization limit the generalizability of the results. The Dutch LLFDI

  14. Reliability residual-life prediction method for thermal aging based on performance degradation

    International Nuclear Information System (INIS)

    Ren Shuhong; Xue Fei; Yu Weiwei; Ti Wenxin; Liu Xiaotian

    2013-01-01

    The paper makes the study of the nuclear power plant main pipeline. The residual-life of the main pipeline that failed due to thermal aging has been studied by the use of performance degradation theory and Bayesian updating methods. Firstly, the thermal aging impact property degradation process of the main pipeline austenitic stainless steel has been analyzed by the accelerated thermal aging test data. Then, the thermal aging residual-life prediction model based on the impact property degradation data is built by Bayesian updating methods. Finally, these models are applied in practical situations. It is shown that the proposed methods are feasible and the prediction accuracy meets the needs of the project. Also, it provides a foundation for the scientific management of aging management of the main pipeline. (authors)

  15. [Redesign of the Spacesuit Long Life Battery and the Personal Life Support System Battery

    Science.gov (United States)

    Scharf, Stephanie

    2015-01-01

    This fall I was working on two different projects that culminated into a redesign of the spacesuit LLB (long life battery). I also did some work on the PLSS (personal life support system) battery with EC. My first project was redlining the work instruction for completing DPAs (destructive physical analysis) on battery cells in the department. The purpose of this document is to create a standard process and ensure that the data in the same way no matter who carries out the analysis. I observed three DPAs, conducted one with help, and conducted two on my own all while taking notes on the procedure. These notes were used to write the final work instruction that will become is the department standard. My second project continued the work of the summer co-op before me. I was testing aluminum heat sinks for their ability to provide good thermal conduction and structural support during a thermal runaway event. The heat sinks were designed by the summer intern but there was not much time for testing before he left. We ran tests with a heater on the bottom of a trigger cell to try to drive thermal runaway and ensure that it will not propagate to adjacent cells. We also ran heat-to-vent tests in an oven to see if the assembly provided structural support and prevented sidewall rupture during thermal runaway. These tests were carried out at ESTA (energy systems test area) and are providing very promising results that safe, high performing (greater than 180 Wh/kg) designs are possible. My main project was a redesign of the LLB battery. Another summer intern did some testing and concluded that there was no simple fix to mitigate thermal runaway propagation hazards in the current design. The only option was a clean sheet redesign of the battery. I was given a volume and ideal energy density and the rest of the design was up to me. First, I created new heat sink banks in Creo using the information gathered in the metal heat sink tests from the summer intern. After this, I made

  16. Integrated Life-Cycle Framework for Maintenance, Monitoring and Reliability of Naval Ship Structures

    Science.gov (United States)

    2012-08-15

    uncertainty in quantitative risk and policy analysis, Cambridge Univer- sity Press. NEVES, L. C, FRANGOPOL, D. M., AND CRUZ , P. J. 2006 Probabilistic lifetime...L. C, FRANGOPOL, D. M., AND CRUZ , P. J. 2006 Probabilistic life- time-oriented multiobjective optimization of bridge maintenance: single...Wright Aeronautical Laboratory. Wright- Patterson Air Force Base, Dayton, Ohio; 1981. [5| Chung H-Y, Manuel L, Frank KH. Optimal inspection

  17. Real-life efficacy and reliability of training a hearing aid.

    Science.gov (United States)

    Keidser, Gitte; Alamudi, Karima

    2013-09-01

    Commercial trainable hearing aids (HA) (i.e., devices that for a period are adjusted by the user in different acoustic environments and that subsequently with changing environments automatically adapt to the user's preferred settings), are readily available; however, little information exists about the efficacy of training a HA. The purpose of this study was to investigate the efficacy and reliability of training a HA in everyday environments. The participants were 26 hearing-impaired volunteers with a median age of 79 years and an average pure-tone average of 53 dB HL. Test devices were commercial, multimemory, prototype devices that enabled training of the compression characteristics in four frequency bands and in six sound classes. Participants wore the National Acoustic Laboratories nonlinear fitting procedure version 2 prescription for 3 weeks and trained the devices from the prescribed response for 3 weeks, before comparing their trained response with the prescription for 2 weeks. The devices were reset to the prescription, and 19 participants repeated the training and comparison trials. During the comparison trial, participants made daily diary ratings of their satisfaction with the programs, and a structured interview was completed at the end of the comparison trial. The participants displayed different needs for changing the prescription, with more daily adjustments leading to training across more sound classes. Unreliable observations were obtained from 8 participants after each of the test and retest comparison trials. Of the 10 participants who made sufficient changes to the prescription during the first trial, 80% preferred their trained response. The 8 "low trainers" reported no preference, and also reported lower overall satisfaction with the device. Fewer adjustments were made during the repeat trial, resulting in less training. Significant correlations between trained variations were seen for 63% of 19 participants. Of the 10 participants who

  18. [Supporting the end of life in a therapeutic coordination apartment].

    Science.gov (United States)

    Cousineau, Jean-Luc; Thévenin, Laurent

    2016-02-01

    Therapeutic coordination apartments are medical-social structures which provide accommodation to desocilialized people. For the last 25 years, the association Cordia has been supporting people with debilitating chronic diseases in situations of precarity. The multi-disciplinary approach also ensures that terminally-ill residents are taken care of right up until their last moments. Copyright © 2015 Elsevier Masson SAS. All rights reserved.

  19. Biological life support systems for a Mars mission planetary base: Problems and prospects

    Science.gov (United States)

    Tikhomirov, A. A.; Ushakova, S. A.; Kovaleva, N. P.; Lamaze, B.; Lobo, M.; Lasseur, Ch.

    The study develops approaches to designing biological life support systems for the Mars mission - for the flight conditions and for a planetary base - using experience of the Institute of Biophysics of the Siberian Branch of the Russian Academy of Sciences (IBP SB RAS) with the Bios-3 system and ESA's experience with the MELISSA program. Variants of a BLSS based on using Chlorella and/or Spirulina and higher plants for the flight period of the Mars mission are analyzed. It is proposed constructing a BLSS with a closed-loop material cycle for gas and water and for part of human waste. A higher-plant-based BLSS with the mass exchange loop closed to various degrees is proposed for a Mars planetary base. Various versions of BLSS configuration and degree of closure of mass exchange are considered, depending on the duration of the Mars mission, the diet of the crew, and some other conditions. Special consideration is given to problems of reliability and sustainability of material cycling in BLSS, which are related to production of additional oxygen inside the system. Technologies of constructing BLSS of various configurations are proposed and substantiated. Reasons are given for using physicochemical methods in BLSS as secondary tools both during the flight and the stay on Mars.

  20. Biological life support systems for martian missions: some problems and prospects

    Science.gov (United States)

    Tikhomirov, A. A.; Ushakova, S. A.; Kovaleva, N. P.; Lasseur, C.

    Taking into account the experience of scientific researches obtained during experiments in the BIOS - 3 of the Institute of Biophysics of Siberian Branch of Russian Academy of Science (IBP SB RAS) and the MELISSA program (ESA), approaches in creation biological life support systems for a flight period and a fixed-site base of Martian mission are considered. Various alternate variants of designing of elements of BLSS based on use of Chlorella and/or Spirulina, and also greenhouses with higher plants for the flight period of Martian mission are analyzed. For this purpose construction of BLSS ensuring full closure of matter turnover according to gas exchange and water and partial closure on the human's exometabolites is supposed. For the fixed site Martian station BLSS based on use of higher plants with a various degree of closure of internal mass exchange are suggested. Various versions of BLSS configuration and degree of closure of mass exchange depending on duration of Martian mission, the diet type of a crew and some other conditions are considered. Special attention is given to problems of reliability and tolerance of matter turnover processes in BLSS which maintenance is connected, in particular, with additional oxygen reproduction inside a system. Technologies for realization of BLSS of various configurations are offered and justified. The auxiliary role of the physicochemical methods in BLSS functioning both for the flight period and for the crew stay on Mars is justified.

  1. LOGIC SIMULATION OF LIFE SUPPORT SYSTEM COMPONENT IN REAL TIME

    Directory of Open Access Journals (Sweden)

    A. S. Marchenko

    2016-01-01

    Full Text Available Abstract. The article proposed the use of simulation methods for evaluating the effectiveness of a stepped fan engine speed control while maintaining the air flow volume in the set boundaries of the «fan-filter» system. A detailed algorithm of the program made on the basis of an Any Logic software package. Is analyzed the possibility of using the proposed method in the design of ventilation systems.The proposed method allows at the design stage to determine the maximum replacement intervals of the systems filter elements, as well as to predict the time to switch the fan motor speeds. Using of the technique allows to refuse the complex air flow systems and maximize the life of the filter elements set.Methods of logical processes modeling allows to reduce construction costs and improve energy efficiency of buildings. 

  2. Life management and operational experience feedback - tools to enhance safety and reliability of the NPP

    International Nuclear Information System (INIS)

    Mach, P.

    1997-01-01

    Preparation has started of the Temelin power plant centralized equipment database. Principles of reliability centered maintenance are studied, and use of these activities will be made in the Plant Ageing Management Programme. The aims of the Programme are as follows: selection of important components subject to ageing, data collection, determination of dominant stressors, development, selection and validation of ageing evaluation methods, setup of experience feedback, determination of responsibilities, methodologies and strategy, elaboration of programme procedures and documentation, and maintenance of programme flexibility. Pilot studies of component ageing are under way: for the reactor pressure vessel, steam generator, pressurizer, piping, ECCS and cables. The organizational structure of the Operational Experience Feedback system is described, as are the responsibility of staff and sources of information. (M.D.)

  3. The reliability and validity of the short version of the WHO Quality of Life Instrument in an Arab general population

    International Nuclear Information System (INIS)

    Ohaeri, Jude U; Awadallab, Abdel W

    2009-01-01

    There is rising interest in quality of life (QOL) research in Arabian countries. The aim of this study was to assess in a nationwide sample of Kuwaiti subjects the reliability and validity of the World Health Organization Quality of Life (WHOQOL-BREF), a shorter version of the widely used QOL assessment instrument that comprises 26 items in the domains of physical health, psychological health, social relationships, and the environment. A one-in-three systematic random proportionate sample of consenting Kuwaiti nationals attending large cooperative stores and municipal government offices in the six governorates completed the Arabic translation of the questionnaire. The indices assessed included test-retest reliability, internal consistency, item internal consistency (2C), item discriminant validity (IDV), known-groups and construct validity. There were 3303 participants (44.8% males, 55.2% females, mean age 35.4 years, range 16 to 87 years). The intra-class correlation for the test-retest statistic and the internal consistency values for the full questionnaire and the domains had a Cronbach's alpha > - 0.7. Of the 24 items that constitute the domains, 21 met the 2 C requirement of correlation > - 0.4 with the corresponding domain, while 16 met the IDV criterion of having a higher correlation with their corresponding domain than other domains. Domain scores discriminated significantly between well and sick groups. In the factor analysis, four strong factors emerged with the same construct as in the WHO report. The Arabic translation of the WHOQOL-BREF has impressive reliability and validity indices. The poor IDV findings are due to the multidimensional nature of the questionnaire. The highly significant validity indices should reassure researchers that the questionnaire represents the same constructs across cultures. Negatively worded items possibly need refinement. (author)

  4. Validity and reliability of the Dutch adaptation of the Psoriatic Arthritis Quality of Life (PsAQoL Questionnaire.

    Directory of Open Access Journals (Sweden)

    Freke Wink

    Full Text Available OBJECTIVE: The Psoriatic Arthritis Quality of Life (PsAQoL questionnaire is a disease- specific instrument developed to measure quality of life (QoL in patients with psoriatic arthritis (PsA. The aim of this study was to translate the measure into Dutch and to determine its psychometric properties. METHOD: Translation of the original English PsAQoL into Dutch was performed by bilingual and lay panel. Ten field-test interviews with PsA patients were performed to assess face and content validity. In total, 211 PsA patients were included in a test-retest postal survey to investigate the reliability and construct validity of the Dutch adaptation of the PsAQoL. The PsAQoL, Health Assessment Questionnaire (HAQ and Skindex-17 were administered on two different occasions approximately two weeks apart. RESULTS: The Dutch version of the PsAQoL was found to be relevant, understandable and easy to complete in only a few minutes. It correlated as expected with the HAQ (Spearman's ρ = 0.72 and the 2 subscales of the Skindex-17 (ρ = 0.40 for the psychosocial and ρ = 0.46 for the symptom scale. Furthermore, the measure had good internal consistency (Cronbach's α = 0.92 and test-retest reliability (ρ = 0.89. The PsAQoL was able to define groups of patients based on self-reported general health status, self-reported severity of PsA and flare of arthritis. Duration of PsA did not influence PsAQoL scores. CONCLUSIONS: The Dutch version of the PsAQoL is a valid and reliable questionnaire suitable for use in clinical or research settings to asses PsA-specific QoL.

  5. Validation of the Stroke Specific Quality of Life Scale (SS-QOL): test of reliability and validity of the Danish version (SS-QOL-DK).

    Science.gov (United States)

    Muus, Ingrid; Williams, Linda S; Ringsberg, Karin C

    2007-07-01

    To test the reliability and validity of the Danish version of the Stroke Specific Quality of Life Scale version 2.0 (SS-QOL-DK), an instrument for evaluation of health-related quality of life. A correlational study. A stroke unit that provides acute care and rehabilitation for stroke patients in Frederiksborg County, Denmark. One hundred and fifty-two stroke survivors participated; 24 of these performed test-retest. Questionnaires were sent out and returned by mail. A subsequent telephone interview assessed functional level and missing items. Test-retest was measured using Spearman's r, internal consistency was estimated using Cronbach's alpha, and evaluation of floor and ceiling values in proportion of minimum and maximum scores. Construct validity was assessed by comparing patients' scores on the SS-QOL-DK with those obtained by other test methods: Beck's Depression Index, the General Health Survey Short Form 36 (SF-36), the Barthel Index and the National Institutes of Health Stroke Scale, evaluating shared variance using coefficient of determination, r2. Comparing groups with known scores assessed known-group validity. Convergent and discriminant validity were assessed. Test-retest of SS-QOL-DK showed excellent stability, Spearman's r = 0.65-0.99. Internal consistency for all domains showed Cronbach's alpha = 0.81-0.94. Missing items rate was 1.0%. Most SS-QOL-DK domains showed moderately shared variance with similar domains of other test methods, r2 = 0.03-0.62. Groups with known differences showed statistically significant difference in scores. Item-to-scale correlation coefficients of 0.37-0.88 supported convergent validity. SS-QOL-DK is a reliable and valid instrument for measuring self-reported health-related quality of life on group level among people with mild to moderate stroke.

  6. A Bayesian least-squares support vector machine method for predicting the remaining useful life of a microwave component

    Directory of Open Access Journals (Sweden)

    Fuqiang Sun

    2017-01-01

    Full Text Available Rapid and accurate lifetime prediction of critical components in a system is important to maintaining the system’s reliable operation. To this end, many lifetime prediction methods have been developed to handle various failure-related data collected in different situations. Among these methods, machine learning and Bayesian updating are the most popular ones. In this article, a Bayesian least-squares support vector machine method that combines least-squares support vector machine with Bayesian inference is developed for predicting the remaining useful life of a microwave component. A degradation model describing the change in the component’s power gain over time is developed, and the point and interval remaining useful life estimates are obtained considering a predefined failure threshold. In our case study, the radial basis function neural network approach is also implemented for comparison purposes. The results indicate that the Bayesian least-squares support vector machine method is more precise and stable in predicting the remaining useful life of this type of components.

  7. Guiding Requirements for Designing Life Support System Architectures for Crewed Exploration Missions Beyond Low-Earth Orbit

    Science.gov (United States)

    Perry, Jay L.; Sargusingh, Miriam J.; Toomarian, Nikzad

    2016-01-01

    The National Aeronautics and Space Administration's (NASA) technology development roadmaps provide guidance to focus technological development in areas that enable crewed exploration missions beyond low-Earth orbit. Specifically, the technology area roadmap on human health, life support and habitation systems describes the need for life support system (LSS) technologies that can improve reliability and in-flight maintainability within a minimally-sized package while enabling a high degree of mission autonomy. To address the needs outlined by the guiding technology area roadmap, NASA's Advanced Exploration Systems (AES) Program has commissioned the Life Support Systems (LSS) Project to lead technology development in the areas of water recovery and management, atmosphere revitalization, and environmental monitoring. A notional exploration LSS architecture derived from the International Space has been developed and serves as the developmental basis for these efforts. Functional requirements and key performance parameters that guide the exploration LSS technology development efforts are presented and discussed. Areas where LSS flight operations aboard the ISS afford lessons learned that are relevant to exploration missions are highlighted.

  8. Equipment reliability and life cycle optimization of a nuclear plant feedwater heater

    International Nuclear Information System (INIS)

    Thomas, Daniel; Coakley, Michael; Catapano, Michael; Svensson, Eric

    2006-01-01

    Many papers published over the last 25 years have strongly emphasized the need for an ongoing program of inspection and testing with subsequent failure cause analysis of feedwater heaters. Plants must be run more competitively; therefore, Utilities must lower operation and maintenance costs, while optimizing overall plant efficiency and capacity factor. One recognized area that needs to be addressed in accomplishing this goal is the heat cycle. This paper specifically deals with the feedwater heating system. Utility engineers must monitor feedwater heater performance in order to recognize degradation, identify and mitigate failure mechanisms, and prevent in-service failures thereby optimizing availability. Periodic tube plugging without complete analysis of the degraded/failed areas resolves the immediate need for return to service; however, heater life will not be optimized. This paper illustrates a complete life cycle management inspection, testing, and maintenance program implemented at Peach Bottom Atomic Power Station (PBAPS). Concerns that tubes may have been too conservatively plugged due to insufficient data and lack of root cause analysis, justified a program that included: - Removal of previously installed plugs; - Video-probe inspection of failed areas; - Extraction of tube samples for further analysis; - Eddy current testing of selected tubes; - Evaluation of the condition of 'insurance' plugged tubes for return to service; - Hydrostatic testing of selected individual tubes; - Final repair plan based on the results of the above program. This paper concludes that no single method of inspection or testing should solely be relied upon in establishing: - The extent of actual degraded conditions; - The mechanism(s) of failure; - The details of repair to be implemented. Evaluating all data affords the best chance in arresting problems and optimizing feedwater heater life. Problem heaters should be continuously monitored and inspected over time until the facts

  9. International Space Station Environmental Control and Life Support System Status: 2010 - 2011

    Science.gov (United States)

    Williams, David E.; Gentry, Gregory J.

    2010-01-01

    The International Space Station (ISS) Environmental Control and Life Support (ECLS) system includes regenerative and non-regenerative technologies that provide the basic life support functions to support the crew, while maintaining a safe and habitable shirtsleeve environment. This paper provides a summary of the U.S. ECLS system activities over the past year, covering the period of time between March 2010 and February 2011 and the continued permanent presence of six crew members on ISS. Work continues on the last of the Phase 3 pressurized elements, commercial cargo resupply vehicles, and extension of the ISS service life from 2015 to 2020 or beyond.

  10. International Space Station Environmental Control and Life Support System Status for the Prior Year: 2011 - 2012

    Science.gov (United States)

    Williams, David E.; Dake, Jason R.; Gentry, Gregory J

    2013-01-01

    The International Space Station (ISS) Environmental Control and Life Support (ECLS) system includes regenerative and non-regenerative technologies that provide the basic life support functions to support the crew, while maintaining a safe and habitable shirtsleeve environment. This paper provides a summary of the U.S. ECLS system activities over the prior year, covering the period of time between March 2011 and February 2012. The ISS continued permanent crew operations including the continuation of six crew members being on ISS. Work continues on the last of the Phase 3 pressurized elements, the commercial cargo resupply vehicles, and work to try and extend ISS service life from 2015 to at least 2028.

  11. International Space Station Environmental Control and Life Support System Previous Year Status for 2013 - 2014

    Science.gov (United States)

    Williams, David E.; Gentry, Gregory J.

    2015-01-01

    The International Space Station (ISS) Environmental Control and Life Support (ECLS) system includes regenerative and non-regenerative technologies that provide the basic life support functions to support the crew, while maintaining a safe and habitable shirtsleeve environment. This paper provides a summary of the U.S. ECLS system activities over the past year and the impacts of the international partners' activities on them, covering the period of time between March 2013 and February 2014. The ISS continued permanent crew operations including the continuation of six crew members being on ISS. Work continues on the commercial crew vehicles, and work to try and extend ISS service life.

  12. International Space Station Environmental Control and Life Support System Status: 2014-2015

    Science.gov (United States)

    Williams, David E.; Gentry, Gregory J.

    2015-01-01

    The International Space Station (ISS) Environmental Control and Life Support (ECLS) system includes regenerative and non-regenerative technologies that provide the basic life support functions to support the crew, while maintaining a safe and habitable shirtsleeve environment. This paper provides a summary of the U.S. ECLS system activities over the past year and the impacts of the international partners' activities on them, covering the period of time between March 2014 and February 2015. The ISS continued permanent crew operations including the continuation of six crew members being on ISS. Work continues on the commercial crew vehicles, and work to try and extend ISS service life.

  13. Development of the Knee Quality of Life (KQoL-26 26-item questionnaire: data quality, reliability, validity and responsiveness

    Directory of Open Access Journals (Sweden)

    Atwell Chris

    2008-07-01

    Full Text Available Abstract Background This article describes the development and validation of a self-reported questionnaire, the KQoL-26, that is based on the views of patients with a suspected ligamentous or meniscal injury of the knee that assesses the impact of their knee problem on the quality of their lives. Methods Patient interviews and focus groups were used to derive questionnaire content. The instrument was assessed for data quality, reliability, validity, and responsiveness using data from a randomised trial and patient survey about general practitioners' use of Magnetic Resonance Imaging for patients with a suspected ligamentous or meniscal injury. Results Interview and focus group data produced a 40-item questionnaire designed for self-completion. 559 trial patients and 323 survey patients responded to the questionnaire. Following principal components analysis and Rasch analysis, 26 items were found to contribute to three scales of knee-related quality of life: physical functioning, activity limitations, and emotional functioning. Item-total correlations ranged from 0.60–0.82. Cronbach's alpha and test retest reliability estimates were 0.91–0.94 and 0.80–0.93 respectively. Hypothesised correlations with the Lysholm Knee Scale, EQ-5D, SF-36 and knee symptom questions were evidence for construct validity. The instrument produced highly significant change scores for 65 trial patients indicating that their knee was a little or somewhat better at six months. The new instrument had higher effect sizes (range 0.86–1.13 and responsiveness statistics (range 1.50–2.13 than the EQ-5D and SF-36. Conclusion The KQoL-26 has good evidence for internal reliability, test-retest reliability, validity and responsiveness, and is recommended for use in randomised trials and other evaluative studies of patients with a suspected ligamentous or meniscal injury.

  14. Development of the knee quality of life (KQoL-26) 26-item questionnaire: data quality, reliability, validity and responsiveness.

    Science.gov (United States)

    Garratt, Andrew M; Brealey, Stephen; Robling, Michael; Atwell, Chris; Russell, Ian; Gillespie, William; King, David

    2008-07-10

    This article describes the development and validation of a self-reported questionnaire, the KQoL-26, that is based on the views of patients with a suspected ligamentous or meniscal injury of the knee that assesses the impact of their knee problem on the quality of their lives. Patient interviews and focus groups were used to derive questionnaire content. The instrument was assessed for data quality, reliability, validity, and responsiveness using data from a randomised trial and patient survey about general practitioners' use of Magnetic Resonance Imaging for patients with a suspected ligamentous or meniscal injury. Interview and focus group data produced a 40-item questionnaire designed for self-completion. 559 trial patients and 323 survey patients responded to the questionnaire. Following principal components analysis and Rasch analysis, 26 items were found to contribute to three scales of knee-related quality of life: physical functioning, activity limitations, and emotional functioning. Item-total correlations ranged from 0.60-0.82. Cronbach's alpha and test retest reliability estimates were 0.91-0.94 and 0.80-0.93 respectively. Hypothesised correlations with the Lysholm Knee Scale, EQ-5D, SF-36 and knee symptom questions were evidence for construct validity. The instrument produced highly significant change scores for 65 trial patients indicating that their knee was a little or somewhat better at six months. The new instrument had higher effect sizes (range 0.86-1.13) and responsiveness statistics (range 1.50-2.13) than the EQ-5D and SF-36. The KQoL-26 has good evidence for internal reliability, test-retest reliability, validity and responsiveness, and is recommended for use in randomised trials and other evaluative studies of patients with a suspected ligamentous or meniscal injury.

  15. Biological life-support systems for Mars mission.

    Science.gov (United States)

    Gitelson, J I

    1992-01-01

    Mars mission like the Lunar base is the first venture to maintain human life beyond earth biosphere. So far, all manned space missions including the longest ones used stocked reserves and can not be considered egress from biosphere. Conventional path proposed by technology for Martian mission LSS is to use physical-chemical approaches proved by the experience of astronautics. But the problem of man living beyond the limits of the earth biosphere can be fundamentally solved by making a closed ecosystem for him. The choice optimum for a Mars mission LSS can be substantiated by comparing the merits and demerits of physical-chemical and biological principles without ruling out possible compromise between them. The work gives comparative analysis of ecological and physical-chemical principles for LSS. Taking into consideration universal significance of ecological problems with artificial LSS as a particular case of their solution, complexity and high cost of large-scale experiments with manned LSS, it would be expedient for these works to have the status of an International Program open to be joined. A program of making artificial biospheres based on preceding experience and analysis of current situation is proposed.

  16. Improving the Reliability of Decision-Support Systems for Nuclear Emergency Management by Leveraging Software Design Diversity

    Directory of Open Access Journals (Sweden)

    Tudor B. Ionescu

    2016-03-01

    Full Text Available This paper introduces a novel method of continuous verification of simulation software used in decision-support systems for nuclear emergency management (DSNE. The proposed approach builds on methods from the field of software reliability engineering, such as N-Version Programming, Recovery Blocks, and Consensus Recovery Blocks. We introduce a new acceptance test for dispersion simulation results and a new voting scheme based on taxonomies of simulation results rather than individual simulation results. The acceptance test and the voter are used in a new scheme, which extends the Consensus Recovery Block method by a database of result taxonomies to support machine-learning. This enables the system to learn how to distinguish correct from incorrect results, with respect to the implemented numerical schemes. Considering that decision-support systems for nuclear emergency management are used in a safety-critical application context, the methods introduced in this paper help improve the reliability of the system and the trustworthiness of the simulation results used by emergency managers in the decision making process. The effectiveness of the approach has been assessed using the atmospheric dispersion forecasts of two test versions of the widely used RODOS DSNE system.

  17. The Logistics Management Decision Support System (LMDSS) : an effective tool to reduce life cycle support costs of aviation systems

    OpenAIRE

    Moore, Ellen E.; Snyder, Carolynn M.

    1998-01-01

    Approved for public release; distribution is unlimited This thesis assesses the capability of the Logistics Management Decision Support System (LMDSS) to meet the information needs of Naval Air Systems Command (NAVAIR) logistics managers based on surveys of logistics managers and interviews with LMDSS program representatives. The LMDSS is being introduced as a tool to facilitate action by NAVAIR logistics managers to reduce the life cycle support costs of aviation systems while protecting ...

  18. Intergenerational support, satisfaction with parent-child relationship and elderly parents' life satisfaction in Hong Kong.

    Science.gov (United States)

    Peng, Chenhong; Kwok, Chi Leung; Law, Yik Wa; Yip, Paul S F; Cheng, Qijin

    2018-01-22

    This study examines in what exchange patterns that three types of intergenerational support are associated with elderly parents' life satisfaction, and whether elderly parents' evaluation on parent-child relationship plays a mediation role on those associations. Data were drawn from Hong Kong Panel Survey for Poverty Alleviation. Respondents aged 65 and over were included ( N=504). Three types of support, namely, daily-living, financial, and emotional support were examined in four patterns-the over-benefited , under-benefited , reciprocal and no flow of exchange. A multivariable linear regression was applied to investigate the association between pattern of intergenerational exchange and life satisfaction, and mediation analysis was employed to examine the mediating role of satisfaction with parent-child relationship on their associations. Elderly parents were less satisfied with their lives when they had no flow of exchange in daily-living support, and more satisfied when they were under-benefited in financial support, and over-benefited or reciprocal in emotional support. Elderly parents' satisfaction with parent-child relationship mediated the association between exchange of emotional support and life satisfaction; but not the association between daily-living or financial support and life satisfaction. Different types of intergenerational support are associated with elderly parents' life satisfaction in different patterns.

  19. [Perspective of intensive care nursing staff on the limitation of life support treatment].

    Science.gov (United States)

    Vallès-Fructuoso, O; Ruiz-de Pablo, B; Fernández-Plaza, M; Fuentes-Milà, V; Vallès-Fructuoso, O; Martínez-Estalella, G

    To determine the perspective of intensive care nursing staff on the limitation of life support treatment (LLST) in the Intensive Care Units. An exploratory qualitative study was carried out by applying the theory of Strauss and Corbin as the analysis tool. Constructivist paradigm. Nursing staff from three Intensive Care Units of Hospital Universitari de Bellvitge. Convenience sampling to reach theoretical saturation of data. Data collection through semi-structured interview recorded prior to informed consent. Rigor and quality criteria (reliability, credibility, transferability), and authenticity criteria: reflexivity. Demographic data was analysed using Excel. A total of 28 interviews were conducted. The mean age of the nurses was 35.6 years, with a mean seniority of 11.46 years of working in ICU. A minority of nurses (21.46%) had received basic training in bioethics. The large majority (85.7%) believe that LLST is not a common practice due to therapeutic cruelty and poor management with it. There is a correlation with the technical concepts; but among the main ethical problems is the decision to apply LLST. Nurses recognise that the decision on applying LLST depends on medical consensus with relatives, and they believe that their opinion is not considered. Their objective is trying to avoid suffering, and assist in providing a dignified death and support to relatives. There is still a paternalistic pattern between the doctor and patient relationship, where the doctor makes the decision and then agrees with the relatives to apply LLST. Organ failure and poor prognosis are the most important criteria for applying LLST. It is necessary to develop a guide for applying LLST, emphasising the involvement of nurses, patients, and their relatives. Copyright © 2016 Elsevier España, S.L.U. y SEEIUC. All rights reserved.

  20. Virtualization of Legacy Instrumentation Control Computers for Improved Reliability, Operational Life, and Management.

    Science.gov (United States)

    Katz, Jonathan E

    2017-01-01

    Laboratories tend to be amenable environments for long-term reliable operation of scientific measurement equipment. Indeed, it is not uncommon to find equipment 5, 10, or even 20+ years old still being routinely used in labs. Unfortunately, the Achilles heel for many of these devices is the control/data acquisition computer. Often these computers run older operating systems (e.g., Windows XP) and, while they might only use standard network, USB or serial ports, they require proprietary software to be installed. Even if the original installation disks can be found, it is a burdensome process to reinstall and is fraught with "gotchas" that can derail the process-lost license keys, incompatible hardware, forgotten configuration settings, etc. If you have running legacy instrumentation, the computer is the ticking time bomb waiting to put a halt to your operation.In this chapter, I describe how to virtualize your currently running control computer. This virtualized computer "image" is easy to maintain, easy to back up and easy to redeploy. I have used this multiple times in my own lab to greatly improve the robustness of my legacy devices.After completing the steps in this chapter, you will have your original control computer as well as a virtual instance of that computer with all the software installed ready to control your hardware should your original computer ever be decommissioned.

  1. Strategy of Trade-Reliable Featured Product Supporting Regional Innovation Systems

    Science.gov (United States)

    Riskiawan, H. Y.; Purnomo, B. H.; Abdurahman, A.; Hariono, B.; Puspitasari, T. D.

    2018-01-01

    Pacitan, Ponorogo, and Magetan had planned the development of featured products as contained in the Medium Term Development Plan (MTDP) until 2020. The focus of development is almost similar to featured products derived from agribusiness, food processing, handycrafts, and tourism. The geographical proximity results characteristics of natural resources and social culture have similarities, including the type of featured products, constraints, problems, and opportunities for development. Given the characteristics and the support system of some featured products contained in these three regions have a lot in common and their functional interactions involving actors from across the region, it is necessary to develop cross-jurisdictional policy. The resulting strategy should be able to support the development of Regional Innovation System (RIS). The purpose of this research is 1) Determining featured product cross-regional between Pacitan regency; Ponorogo and Magetan districts in support of RIS development; and 2) Designing a featured product development strategy using supply chain management in order to drive the local economy. Based on the results of research conducted, featured products across the region that have potentiality to be developed are: processed products of “janggelan” leather products, and woven bamboo.

  2. Health of women: associations among life events, social support, and personality for selected patient groups.

    Science.gov (United States)

    Norlander, T; Dahlin, A; Archer, T

    2000-02-01

    This study examined the effects of life events, social support, personality traits, and siblings' birth-order on the health of women. 199 middle-class participants were included. 95 women, randomly assigned from four different patient groups, were compared with a control group of 96 randomly selected women without any special health problems. They completed a questionnaire which included questions regarding family background, health, different life events, social support, and signs of disease and a projective test, the Sivik Psychosomatism Test. Analysis indicated that report of negative life events was associated with more physical symptoms than positive life events and that the patient groups reported more negative life events and less social support than the control group.

  3. Description of Anomalous Noise Events for Reliable Dynamic Traffic Noise Mapping in Real-Life Urban and Suburban Soundscapes

    Directory of Open Access Journals (Sweden)

    Francesc Alías

    2017-02-01

    Full Text Available Traffic noise is one of the main pollutants in urban and suburban areas. European authorities have driven several initiatives to study, prevent and reduce the effects of exposure of population to traffic. Recent technological advances have allowed the dynamic computation of noise levels by means of Wireless Acoustic Sensor Networks (WASN such as that developed within the European LIFE DYNAMAP project. Those WASN should be capable of detecting and discarding non-desired sound sources from road traffic noise, denoted as anomalous noise events (ANE, in order to generate reliable noise level maps. Due to the local, occasional and diverse nature of ANE, some works have opted to artificially build ANE databases at the cost of misrepresentation. This work presents the production and analysis of a real-life environmental audio database in two urban and suburban areas specifically conceived for anomalous noise events’ collection. A total of 9 h 8 min of labelled audio data is obtained differentiating among road traffic noise, background city noise and ANE. After delimiting their boundaries manually, the acoustic salience of the ANE samples is automatically computed as a contextual signal-to-noise ratio (SNR. The analysis of the real-life environmental database shows high diversity of ANEs in terms of occurrences, durations and SNRs, as well as confirming both the expected differences between the urban and suburban soundscapes in terms of occurrences and SNRs, and the rare nature of ANE.

  4. 24. MPA-seminar: safety and reliability of plant technology with special emphasis on integrity and life management. Vol. 2. Papers 28-63

    International Nuclear Information System (INIS)

    1999-01-01

    The second volume is dedicated to the safety and reliability of plant technology with special emphasis on the integrity and life management. The following topics are discussed: 1. Integrity of vessels, pipes and components. 2. Fracture mechanics. 3. Measures for the extension of service life, and 4. Online Monitoring. All 30 contributions are separately analyzed for this database. (orig.)

  5. Developing Biological ISRU: Implications for Life Support and Space Exploration

    Science.gov (United States)

    Brown, I. I.; Allen, C. C.; Garrison, D. H.; Sarkisova, S. A.; Galindo, C.; Mckay, David S.

    2010-01-01

    Main findings: 1) supplementing very dilute media for cultivation of CB with analogs of lunar or Martian regolith effectively supported the proliferation of CB; 2) O2 evolution by siderophilic cyanobacteria cultivated in diluted media but supplemented with iron-rich rocks was higher than O2 evolution by same strain in undiluted medium; 3) preliminary data suggest that organic acids produced by CB are involved in iron-rich mineral dissolution; 4) the CB studied can accumulate iron on and in their cells; 4) sequencing of the cyanobacterium JSC-1 genome revealed that this strain possesses molecular features which make it applicable for the cultivation in special photoreactors on Moon and Mars. Conclusion: As a result of pilot studies, we propose, to develop a concept for semi-closed integrated system that uses CB to extract useful elements to revitalize air and produce valuable biomolecules. Such a system could be the foundation of a self-sustaining extraterrestrial outpost (Hendrickx, De Wever et al., 2005; Handford, 2006). A potential advantage of a cyanobacterial photoreactor placed between LSS and ISRU loops is the possibility of supplying these systems with extracted elements and compounds from the regolith. In addition, waste regolith may be transformed into additional products such as methane, biomass, and organic and inorganic soil enrichment for the cultivation of higher plants.

  6. Is the association between high strain work and depressive symptoms modified by private life social support

    DEFF Research Database (Denmark)

    Madsen, Ida E H; Jorgensen, Anette F B; Borritz, Marianne

    2014-01-01

    be modified by factors outside the working environment. This article examines the modifying role of private life social support in the relation between high strain work and the development of severe depressive symptoms. METHODS: Data were questionnaire-based, collected from a cross-occupational sample of 1......,074 Danish employees. At baseline, all participants were free of severe depressive symptoms, measured by the Mental Health Inventory. High strain work was defined by the combination of high psychological demands at work and low control, measured with multi-dimensional scales. Private life social support......, neither high strain work nor low private life social support statistically significantly predicted depressive symptoms. However, participants with joint exposure to high strain work and low private life social support had an Odds ratio (OR) for severe depressive symptoms of 3.41 (95% CI: 1...

  7. The Incorporation of Basic Life-Support Training in the Pharmacy Curriculum

    Science.gov (United States)

    Masoud, Asaad N.

    1976-01-01

    Pharmacists have a unique role to play in providing basic life-support since they are the health professionals who are most available and who enjoy the greatest contact with the public. Training procedures are described. (LBH)

  8. [A Medical Devices Management Information System Supporting Full Life-Cycle Process Management].

    Science.gov (United States)

    Tang, Guoping; Hu, Liang

    2015-07-01

    Medical equipments are essential supplies to carry out medical work. How to ensure the safety and reliability of the medical equipments in diagnosis, and reduce procurement and maintenance costs is a topic of concern to everyone. In this paper, product lifecycle management (PLM) and enterprise resource planning (ERP) are cited to establish a lifecycle management information system. Through integrative and analysis of the various stages of the relevant data in life-cycle, it can ensure safety and reliability of medical equipments in the operation and provide the convincing data for meticulous management.

  9. Social support over Facebook as predictor of life satisfaction among Malaysian university students

    OpenAIRE

    SHOK HONG OOI

    2017-01-01

    Many young people interact and thus receive and communicate social support over the online world, particularly through Facebook. This paper focuses on how Malaysian university students perceived social support over Facebook. More specifically, this study focuses on how perceived social support influence university students’ life satisfaction. Participants were 800 university students from southern of Malaysia (178 male and 622 female). The finding showed that social support is related to univ...

  10. Perceived Family Support, Acculturation, and Life Satisfaction in Mexican American Youth: A Mixed-Methods Exploration

    Science.gov (United States)

    Edwards, Lisa M.; Lopez, Shane J.

    2006-01-01

    In this article, the authors describe a mixed-methods study designed to explore perceived family support, acculturation, and life satisfaction among 266 Mexican American adolescents. Specifically, the authors conducted a thematic analysis of open-ended responses to a question about life satisfaction to understand participants' perceptions of…

  11. FACTORS AFFECTING QUALITY OF LIFE AND LEVEL OF SOCIAL SUPPORT IN CANCER PATIENTS

    Directory of Open Access Journals (Sweden)

    Ayse Berivan Bakan

    2017-04-01

    Full Text Available Background: When people face health problems, their life satisfaction levels and social relations could be ruined. When it comes to an eerie, deadly and chronic disease like cancer, the individual is much more likely to be affected by it. Objective: This descriptive study aims to identify quality of life and level of social support and the affecting factors in cancer patients. Methods: The sample included 170 patients who applied to Internal Diseases, Radiation Oncology, Thorax diseases clinics and Chemotherapy polyclinic in a university hospital in Turkey between March and August, 2005, who met the research criteria, and who volunteered to participate in the study. The sample represented 20 % of the target population. Data were collected through SF-36 Quality of Life Scale and Multidimensional Scale of Perceived Social Support. Results: The patients’ Global Quality of Life mean score was found 38.67 ± 13.64, and mean score for the Perceived Social Support was found 59.19 ± 17.5. Global Quality of Life score was higher in those who underwent an operation and who received ambulatory health care. Although Global Quality of Life was not influenced by the gender variable, male patients’ level of well-being was found to be higher. Perceived Social Support total score was found to be higher in those who knew about their disease. Family support was found to be higher in those who were married and who lived in town; it was found to be low in those who had low socio-economic level and who received inpatient treatment. Friend support was found to be high in those who knew about their disease. Conclusion: There was a linear relationship between Perceived Social Support and Quality of Life. It is recommended that more studies with wider groups of participants would shed more light to the issue of identifying quality of life, social support level and the relationships between them in cancer patients.

  12. [Current recommendations for basic/advanced life support : Addressing unanswered questions and future prospects].

    Science.gov (United States)

    Fink, K; Schmid, B; Busch, H-J

    2016-11-01

    The revised guidelines for cardiopulmonary resuscitation were implemented by the European Resuscitation Council (ERC) in October 2015. There were few changes concerning basic and advanced life support; however, some issues were clarified compared to the ERC recommendations from 2010. The present paper summarizes the procedures of basic and advanced life support according to the current guidelines and highlights the updates of 2015. Furthermore, the article depicts future prospects of cardiopulmonary resuscitation that may improve outcome of patients after cardiac arrest in the future.

  13. [Organising and supporting the end of life when faced with a refusal of care].

    Science.gov (United States)

    Rautureau, Pascal

    2018-04-01

    Often ethically complex, end-of-life situations can mean nursing teams are confronted with a refusal of care. Through a representative clinical situation, a nurse describes the support provided by a multidisciplinary team, in the home, to comply with the wishes of a person at the end of life, support the family, anticipate possible difficulties and organise adapted care which respects all those concerned. Copyright © 2018 Elsevier Masson SAS. All rights reserved.

  14. Telepsychiatry clinical decision support system used by non-psychiatrists in remote areas: Validity & reliability of diagnostic module

    Science.gov (United States)

    Malhotra, Savita; Chakrabarti, Subho; Shah, Ruchita; Sharma, Minali; Sharma, Kanu Priya; Malhotra, Akanksha; Upadhyaya, Suneet K.; Margoob, Mushtaq A.; Maqbool, Dar; Jassal, Gopal D.

    2017-01-01

    Background & objectives: A knowledge-based, logically-linked online telepsychiatric decision support system for diagnosis and treatment of mental disorders was developed and validated. We evaluated diagnostic accuracy and reliability of the application at remote sites when used by non-psychiatrists who underwent a brief training in its use through video-conferencing. Methods: The study was conducted at a nodal telepsychiatry centre, and three geographically remote peripheral centres. The diagnostic tool of application had a screening followed by detailed criteria-wise diagnostic modules for 18 psychiatric disorders. A total of 100 consecutive consenting adult outpatients attending remote telepsychiatry centres were included. To assess inter-rater reliability, patients were interviewed face to face by non-specialists at remote sites using the application (active interviewer) and simultaneously on online application via video-conferencing by a passive assessor at nodal centre. Another interviewer at the nodal centre rated the patient using Mini-International Neuropsychiatric Interview (MINI) for diagnostic validation. Results: Screening sub-module had high sensitivity (80-100%), low positive predictive values (PPV) (0.10-0.71) but high negative predictive value (NPV) (0.97-1) for most disorders. For the diagnostic sub-modules, Cohen's kappa was >0.4 for all disorders, with kappa of 0.7-1.0 for most disorders. PPV and NPV were high for most disorders. Inter-rater agreement analysis revealed kappa >0.6 for all disorders. Interpretation & conclusions: Diagnostic tool showed acceptable to good validity and reliability when used by non-specialists at remote sites. Our findings show that diagnostic tool of the telepsychiatry application has potential to empower non-psychiatrist doctors and paramedics to diagnose psychiatric disorders accurately and reliably in remote sites. PMID:29265020

  15. Evaluation of the reliability concerning the identification of human factors as contributing factors by a computer supported event analysis (CEA)

    International Nuclear Information System (INIS)

    Wilpert, B.; Maimer, H.; Loroff, C.

    2000-01-01

    The project's objectives are the evaluation of the reliability concerning the identification of Human Factors as contributing factors by a computer supported event analysis (CEA). CEA is a computer version of SOL (Safety through Organizational Learning). Parts of the first step were interviews with experts from the nuclear power industry and the evaluation of existing computer supported event analysis methods. This information was combined to a requirement profile for the CEA software. The next step contained the implementation of the software in an iterative process of evaluation. The completion of this project was the testing of the CEA software. As a result the testing demonstrated that it is possible to identify contributing factors with CEA validly. In addition, CEA received a very positive feedback from the experts. (orig.) [de

  16. Life Cycle Management for Equipments in Nuclear Plants Based on Reliability

    International Nuclear Information System (INIS)

    Wang Dalin; Sun Jinlong

    2012-01-01

    Majority of equipments in nuclear power stations are not un-repairable, but repaired after failures or maintained periodically and then returned to running. Along with aging or fatigue causes, duration between failures may be variable such as larger or shorter. Equipments failure occurrences are consistent with non-homogeneous Poisson process (NHPP), in which their failure rates are variable. We chose Weibull process to simplify the actual circumstances to obtain the optimal life cycle management plans approximately. In application we need to estimate parameters of Weibull process with existing data. Before that, trend test is necessary. Total time test (TTT) is an alternative. Trend test can determine whether the failure rate changes along operating time and whether the devices operated under imperfect or minimal repair. Parameters of Weibull process λ, β can be estimated by maximum likelihood estimation method. LCM model is designed to found an optimizing model for those aging equipments under minimal repair or imperfect maintenance with maximum economic or availability as objective function. The purpose is to establish the optimal replacement strategies. Periodical replacement is the most regular choice and so LCM model aims to calculate the optimal replacement periodical duration.

  17. Real-life decision making in college students. II: Do individual differences show reliable effects?

    Science.gov (United States)

    Galotti, Kathleen M; Tandler, Jane M; Wiener, Hillary J D

    2014-01-01

    First-year undergraduates participated in a short-term longitudinal study of real-life decision making over their first 14 months of college. They were surveyed about 7 different decisions: choosing courses for upcoming terms (on 3 different occasions), choosing an academic major (twice), planning for the upcoming summer, and planning for sophomore-year housing. They also completed a survey of self-reported decision-making styles and the Need for Cognition survey (Cacioppo & Petty, 1982) to assess their focus on rationality and enjoyment of analytic thinking. Results showed few statistically significant correlations between stylistic measures and behavioral measures of decision making, in either the amount of information considered or the way in which the information integration tracked predictions of linear models of decision making applied to each participant's data. However, there were consistent correlations, across the 7 decisions, between stylistic measures and affective reactions to, or retrospective descriptions of, episodes of decision making. We suggest that decision-making styles instruments may better reflect the construction of narratives of self as a decision maker more than they do actual behavior during decision making.

  18. Process and Tool Support for Ontology-Aware Life Support System Development and Integration, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — Recent advances in ontology development support a rich description of entities that are modeled within a domain and how these entities relate to each other. However,...

  19. Quality of life and depression following childbirth: impact of social support.

    Science.gov (United States)

    Webster, Joan; Nicholas, Catherine; Velacott, Catherine; Cridland, Noelle; Fawcett, Lisa

    2011-10-01

    to evaluate the impact of social support on postnatal depression and health-related quality of life. prospective cohort study. Data were collected at baseline and at six weeks post discharge using a postal survey. between August and December 2008, 320 women from a large tertiary hospital were recruited following the birth of their infant. Edinburgh Postnatal Depression Scale (EPDS), Maternity Social Support Scale and World Health Organization Quality of Life assessment questionnaire. of the 320 women recruited, 222 (69.4%) returned their six-week questionnaire. Women with low social support had significantly higher scores on the EPDS than women who reported adequate support (p = 0.007). There was also a significant effect of social support on health-related quality of life. Women with low family or partner support scored lower in all domains, with the greatest mean difference in the social health domain (p = 0.000). Of those scoring >10 on the EPDS, 75.5% had sought professional help. women with low social support are more likely to report postnatal depression and lower quality of life than well-supported women. Careful assessment of a woman's level of support following the birth, particularly from her partner and family, may provide useful information for possible interventions. Copyright © 2010 Elsevier Ltd. All rights reserved.

  20. Measuring the reliability and validity of the Greek edition of the Diabetes Quality of Life Brief Clinical Inventory.

    Science.gov (United States)

    Rekleiti, Maria; Souliotis, Kyriakos; Sarafis, Pavlos; Kyriazis, Ioannis; Tsironi, Maria

    2018-06-01

    The present study focuses on studying the validity and reliability of the Greek edition of DQOL-BCI. DQOL-BCI includes 15 questions-elements that are evaluated on a 5-grade scale like Likert and two general form-shapes. The translation process was conducted in conformity with the guidelines of EuroQol group. A non-random sample of 65 people-patients diagnosed with diabetes I and II was selected. The questionnaire that was used to collect the data was the translated version of DQOL-BCI, and included the demographic characteristics of the interviewees. The content validity of DQOL-BCI was re-examined from a team of five experts (expert panel) for qualitative and quantitative performance. The completion of the questionnaire was done via a personal interview. The sample consisted of 58 people (35 men and 23 women, 59.9 ± 10.9 years). The translation of the questionnaire was found appropriate in accordance to the peculiarities of the Greek language and culture. The largest deviation of values is observed in QOL1 (1.71) in comparison to QOL6 (2.98). The difference between the standard deviations is close to 0.6. The statistics results of the tests showed satisfactory content validity and high construct validity, while the high values for Cronbach alpha index (0.95) reveal high reliability and internal consistency. The Greek version of DQOL-BCI has acceptable psychometric properties and appears to demonstrate high internal reliability and satisfactory construct validity, which allows its use as an important tool in evaluating the quality of life of diabetic patients in relation to their health. Copyright © 2018. Published by Elsevier B.V.

  1. Self-reported quality of life measure is reliable and valid in adult patients suffering from schizophrenia with executive impairment.

    Science.gov (United States)

    Baumstarck, Karine; Boyer, Laurent; Boucekine, Mohamed; Aghababian, Valérie; Parola, Nathalie; Lançon, Christophe; Auquier, Pascal

    2013-06-01

    Impaired executive functions are among the most widely observed in patients suffering from schizophrenia. The use of self-reported outcomes for evaluating treatment and managing care of these patients has been questioned. The aim of this study was to provide new evidence about the suitability of self-reported outcome for use in this specific population by exploring the internal structure, reliability and external validity of a specific quality of life (QoL) instrument, the Schizophrenia Quality of Life questionnaire (SQoL18). cross-sectional study. age over 18 years, diagnosis of schizophrenia according to the DSM-IV criteria. sociodemographic (age, gender, and education level) and clinical data (duration of illness, Positive and Negative Syndrome Scale, Calgary Depression Scale for Schizophrenia); QoL (SQoL18); and executive performance (Stroop test, lexical and verbal fluency, and trail-making test). Non-impaired and impaired populations were defined for each of the three tests. For the six groups, psychometric properties were compared to those reported from the reference population assessed in the validation study. One hundred and thirteen consecutive patients were enrolled. The factor analysis performed in the impaired groups showed that the questionnaire structure adequately matched the initial structure of the SQoL18. The unidimensionality of the dimensions was preserved, and the internal/external validity indices were close to those of the non-impaired groups and the reference population. Our study suggests that executive dysfunction did not compromise the reliability or validity of self-reported disease-specific QoL questionnaire. Copyright © 2013 Elsevier B.V. All rights reserved.

  2. Assessing software quality at each step of its life-cycle to enhance reliability of control systems

    International Nuclear Information System (INIS)

    Hardion, V.; Buteau, A.; Leclercq, N.; Abeille, G.; Pierre-Joseph, Z.; Le, S.

    2012-01-01

    A distributed software control system aims to enhance the upgrade ability and reliability by sharing responsibility between several components. The disadvantage is that it makes it harder to detect problems on a significant number of modules. With Kaizen in mind we have chosen to continuously invest in automation to obtain a complete overview of software quality despite the growth of legacy code. The development process has already been mastered by staging each life-cycle step thanks to a continuous integration server based on JENKINS and MAVEN. We enhanced this process, focusing on 3 objectives: Automatic Test, Static Code Analysis and Post-Mortem Supervision. Now, the build process automatically includes a test section to detect regressions, incorrect behaviour and integration incompatibility. The in-house TANGOUNIT project satisfies the difficulties of testing distributed components such as Tango Devices. In the next step, the programming code has to pass a complete code quality check-up. The SONAR quality server has been integrated in the process, to collect each static code analysis and display the hot topics on summary web pages. Finally, the integration of Google BREAKPAD in every TANGO Devices gives us essential statistics from crash reports and enables us to replay the crash scenarios at any time. We have already gained greater visibility on current developments. Some concrete results will be presented including reliability enhancement, better management of subcontracted software development, quicker adoption of coding standards by new developers and understanding of impacts when moving to a new technology. (authors)

  3. Social support, self-care, and quality of life in cancer patients receiving radiotherapy in Thailand

    International Nuclear Information System (INIS)

    Hanucharurnkul, S.

    1988-01-01

    The purpose of the study was two-fold: (1) to examine the relationships among self-care, social support, and quality of life in adult cancer patients receiving radiotherapy while the selected basic conditioning factors of age, marital and socio-economic status, living arrangement, stage and site of cancer were statistically controlled; and (2) to test a theoretical model which postulated that (a) quality of life was predicted jointly by the selected basic conditioning factors, social support and self-care, and (b) self-care was predicted jointly by the selected basic conditioning factors and social support. A convenience sample of 112 adult cervical and head/neck cancer patients receiving radiotherapy was obtained from radiotherapy outpatient clinic in three hospitals located in Bangkok, Thailand. Results of the study indicated positive relationships among self-care, social support, and quality of life. Socio-economic status, site of cancer, and self-care were significant predictors for reported quality of life. Social support appeared to be a significant predictor of quality of life indirectly through self-care. Socio-economic status and social support were also significant predictors of self-care, whereas, stage and site of cancer seemed to predict self-care indirectly through social support

  4. Status of Perceived Social Support and Quality of Life among Hearing-Impaired Adolescents

    Directory of Open Access Journals (Sweden)

    Tayebeh Reyhani

    2016-02-01

    Full Text Available Background Annual four to five thousand babies are born with hearing loss in the Iran. Hearing impairment is a disability that affects the quality of life of people with this problem. These individuals need to support from family and friends because of their specific conditions that this received support has impact on their quality of life. This study was conducted to assess the status of perceived social support and quality of life of hearing-impaired adolescent. Material and Methods A cross-correlation study was performed with cluster and multi stage random sampling method on 83 students with hearing impairment who met the inclusion criteria of the study in Mashhad. The data collection tools included Pediatric quality of life inventory (adolescent form and perceived social support inventory (from family and friends.The data obtained from the questionnaires were analyzed through SPSS software version 16. Results The results showed that the majority of the most of adolescents with hearing impairment were reported moderate total quality of life (%51.8. But the majority of them reported perceived social support from family was moderate (%61.5 and from friends was week (%45.8. Also there was a significant relationship between category of total quality of life of adolescent viewpoint with perceived social support from family (P=0.056. Conclusion Based on the obtained results, the majority of the most of adolescents with hearing impairment were reported moderate total quality of life. Disability and condition of these persons affects quality of life of them, so need for adequate support from family, friends and society. Nurses play an important role in identifying and introduce these needs and condition and how to deal with them.

  5. Verification of the reliability and validity of a Japanese version of the Quality of Life in Childhood Epilepsy Questionnaire (QOLCE-J).

    Science.gov (United States)

    Moriguchi, Eri; Ito, Mikiko; Nagai, Toshisaburo

    2015-11-01

    A Japanese version of the Quality of Life in Childhood Epilepsy Questionnaire (QOLCE-J) was developed using international guidelines as a QOL scale for childhood epilepsy; its reliability and validity were examined, focusing on Japanese pediatric epilepsy patients applicability. A pilot test questionnaire survey was conducted; involving parents of pediatric epilepsy patients aged 4-15 undergoing outpatient treatment. 278 responses were obtained and analyzed. Internal consistency for the 16 QOLCE-J subscales, except for , was sufficient, and a high overall coefficient α was obtained. The intraclass correlation coefficient was also high, supporting the test-retest reliability of this version. Associations among the subscales, high correlations of r>0.7 were observed among , , and , representing cognitive and behavioral aspects, and among these and . In contrast, correlations among others were moderate or weaker. Furthermore, correlations of r>0.35 were observed among the subscales of the SDQ (Strength and Difficulties Questionnaire) used as an external criterion and the QOLCE-J, confirming the criterion validity of the study version. Analysis of associations between the total QOLCE-J score and pathology of epilepsy, found significant correlation with age of onset and frequency of seizures, ADL, and antiepileptics side effects' symptoms. QOLCE has mostly been used in treatment resistant pediatric patients, the influence of interictal period presently observed, like antiepileptic side effects' symptoms; suggest usefulness for pediatric patients with seizures under control. The QOLCE-J with sufficient reliability and validity may be applicable as a QOL scale for Japanese children with epilepsy. Copyright © 2015 The Japanese Society of Child Neurology. Published by Elsevier B.V. All rights reserved.

  6. Pediatric Basic Life Support Self-training is Comparable to Instructor-led Training: A randomized manikin study

    DEFF Research Database (Denmark)

    Vestergaard, L. D.; Løfgren, Bo; Jessen, C.

    2011-01-01

    Pediatric Basic Life Support Self-training is comparable to Instructor-led Training: A randomized manikin study.......Pediatric Basic Life Support Self-training is comparable to Instructor-led Training: A randomized manikin study....

  7. Demonstrating Reliable High Level Waste Slurry Sampling Techniques to Support Hanford Waste Processing

    Energy Technology Data Exchange (ETDEWEB)

    Kelly, Steven E.

    2013-11-11

    The Hanford Tank Operations Contractor (TOC) and the Hanford Waste Treatment and Immobilization Plant (WTP) contractor are both engaged in demonstrating mixing, sampling, and transfer system capability using simulated Hanford High-Level Waste (HL W) formulations. This work represents one of the remaining technical issues with the high-level waste treatment mission at Hanford. The TOC must demonstrate the ability to adequately mix and sample high-level waste feed to meet the WTP Waste Acceptance Criteria and Data Quality Objectives. The sampling method employed must support both TOC and WTP requirements. To facilitate information transfer between the two facilities the mixing and sampling demonstrations are led by the One System Integrated Project Team. The One System team, Waste Feed Delivery Mixing and Sampling Program, has developed a full scale sampling loop to demonstrate sampler capability. This paper discusses the full scale sampling loops ability to meet precision and accuracy requirements, including lessons learned during testing. Results of the testing showed that the Isolok(R) sampler chosen for implementation provides precise, repeatable results. The Isolok(R) sampler accuracy as tested did not meet test success criteria. Review of test data and the test platform following testing by a sampling expert identified several issues regarding the sampler used to provide reference material used to judge the Isolok's accuracy. Recommendations were made to obtain new data to evaluate the sampler's accuracy utilizing a reference sampler that follows good sampling protocol.

  8. Demonstrating Reliable High Level Waste Slurry Sampling Techniques to Support Hanford Waste Processing

    International Nuclear Information System (INIS)

    Kelly, Steven E.

    2013-01-01

    The Hanford Tank Operations Contractor (TOC) and the Hanford Waste Treatment and Immobilization Plant (WTP) contractor are both engaged in demonstrating mixing, sampling, and transfer system capability using simulated Hanford High-Level Waste (HL W) formulations. This work represents one of the remaining technical issues with the high-level waste treatment mission at Hanford. The TOC must demonstrate the ability to adequately mix and sample high-level waste feed to meet the WTP Waste Acceptance Criteria and Data Quality Objectives. The sampling method employed must support both TOC and WTP requirements. To facilitate information transfer between the two facilities the mixing and sampling demonstrations are led by the One System Integrated Project Team. The One System team, Waste Feed Delivery Mixing and Sampling Program, has developed a full scale sampling loop to demonstrate sampler capability. This paper discusses the full scale sampling loops ability to meet precision and accuracy requirements, including lessons learned during testing. Results of the testing showed that the Isolok(R) sampler chosen for implementation provides precise, repeatable results. The Isolok(R) sampler accuracy as tested did not meet test success criteria. Review of test data and the test platform following testing by a sampling expert identified several issues regarding the sampler used to provide reference material used to judge the Isolok's accuracy. Recommendations were made to obtain new data to evaluate the sampler's accuracy utilizing a reference sampler that follows good sampling protocol

  9. Perspectives of different type biological life support systems (BLSS) usage in space missions

    Science.gov (United States)

    Bartsev, S. I.; Gitelson, J. I.; Lisovsky, G. M.; Mezhevikin, V. V.; Okhonin, V. A.

    1996-10-01

    In the paper an attempt is made to combine three important criteria of LSS comparison: minimum mass, maximum safety and maximum quality of life. Well-known types of BLSS were considered: with higher plant, higher plants and mushrooms, microalgae, and hydrogen-oxidizing bacteria. These BLSSs were compared in terms of "integrated" mass for the case of a vegetarian diet and a "normal" one (with animal proteins and fats). It was shown that the BLSS with higher plants and incineration of wastes becomes the best when the exploitation period is more than 1 yr. The dependence of higher plants' LSS structure on operation time was found. Comparison of BLSSs in terms of integral reliability (this criterion includes mass and quality of life criteria) for a lunar base scenario showed that BLSSs with higher plants are advantageous in reliability and comfort. This comparison was made for achieved level of technology of closing and for perspective one.

  10. Life-sustaining support: ethical, cultural, and spiritual conflicts. Part II: Staff support--a neonatal case study.

    Science.gov (United States)

    Stutts, Amy; Schloemann, Johanna

    2002-06-01

    As medical knowledge and technology continue to increase, so will the ability to provide life-sustaining support to patients who otherwise would not survive. Along with these advances comes the responsibility of not only meeting the clinical needs of our patients, but also of understanding how the family's culture and spirituality will affect their perception of the situation and their decision-making process. As the U.S. continues to become a more culturally diverse society, health care professionals will need to make changes in their practice to meet the psychosocial needs of their patients and respect their treatment decisions. Part I of this series (April 2002) discussed how the cultural and spiritual belief systems of Baby S's family affected their decision-making processes and also their ability to cope with the impending death of their infant. The development of a culturally competent health care team can help bridge the gap between culturally diverse individuals. This article addresses the following questions: 1. What legal alternatives are available to the staff to protect the patient from suffering associated with the continuation of futile life-sustaining support? 2. What conflicts might the staff experience as a result of the continuation of futile life-sustaining support? 3. What efforts can be made to support members of the staff? 4. What can be done to prepare others in the health care professions to deal more effectively with ethical/cultural issues?

  11. Evaluating the Inter-Respondent (Consumer vs. Staff) Reliability and Construct Validity (SIS vs. Vineland) of the Supports Intensity Scale on a Dutch Sample

    Science.gov (United States)

    Claes, C.; Van Hove, G.; van Loon, J.; Vandevelde, S.; Schalock, R. L.

    2009-01-01

    Background: Despite various reliability studies on the Supports Intensity Scale (SIS), to date there has not been an evaluation of the reliability of client vs. staff judgments. Such determination is important, given the increasing consumer-driven approach to services. Additionally, there has not been an evaluation of the instrument's construct…

  12. On the use of Space Station Freedom in support of the SEI - Life science research

    Science.gov (United States)

    Leath, K.; Volosin, J.; Cookson, S.

    1992-01-01

    The use of the Space Station Freedom (SSF) for life sciences research is evaluated from the standpoint of requirements for the Space Exploration Initiative (SEI). SEI life sciences research encompasses: (1) biological growth and development in space; (2) life support and environmental health; (3) physiological/psychological factors of extended space travel; and (4) space environmental factors. The platforms required to support useful study in these areas are listed and include ground-based facilities, permanently manned spacecraft, and the Space Shuttle. The SSF is shown to be particularly applicable to the areas of research because its facilities can permit the study of gravitational biology, life-support systems, and crew health. The SSF can serve as an experimental vehicle to derive the required knowledge needed to establish a commitment to manned Mars missions and colonization plans.

  13. Social support and stressful events in two dimensions: life events and illness as an event.

    NARCIS (Netherlands)

    Tijhuis, M.A.R.; Flap, H.D.; Foets, M.; Groenewegen, P.P.

    1995-01-01

    Previous research on the buffering effects of social support focused mainly on life events as stressors, and mental illness as outcome. Furthermore, the question as to why support influences illness has not been subjected to theoretical or empirical study much. In this article we develop a

  14. Suicidal Ideation and Distress among Immigrant Adolescents: The Role of Acculturation, Life Stress, and Social Support

    Science.gov (United States)

    Cho, Yong-Beom; Haslam, Nick

    2010-01-01

    Acculturative stress and social support play important roles in suicide-related phenomena among adolescent immigrants. To examine their contributions, measures of acculturative and general life stress and a measure of multiple sources of social support were used to predict psychological distress and suicidal ideation among Korean-born high school…

  15. Gender differences in the relation between depression and social support in later life

    NARCIS (Netherlands)

    Sonnenberg, C.M.; Deeg, D.J.H.; van Tilburg, T.G.; Vink, D.; Stek, M.L.; Beekman, A.T.F.

    2013-01-01

    ABSTRACT Background: Prevalence of depression is twice as high in women as in men, also in older adults. Lack of social support is a risk factor for late-life depression. The relation between depression and social support may be different for men and women. Methods: Data from the Longitudinal Aging

  16. Peers' Perceived Support, Student Engagement in Academic Activities and Life Satisfaction: A Structural Equation Modeling Approach

    Science.gov (United States)

    Hakimzadeh, Rezvan; Besharat, Mohammad-Ali; Khaleghinezhad, Seyed Ali; Ghorban Jahromi, Reza

    2016-01-01

    This study investigates the relationships among peers' perceived support, life satisfaction, and student engagement in academic activities. Three hundred and fifteen Iranian students (172 boys and 143 girls) who were studying in one suburb of Tehran participated in this study. All participants were asked to complete Peers' Perceived Support scale…

  17. Supportive College Environment for Meaning Searching and Meaning in Life among American College Students

    Science.gov (United States)

    Shin, Joo Yeon; Steger, Michael F.

    2016-01-01

    We examined whether American college students who perceive their college environment as supportive for their meaning searching report higher levels of meaning in life. We also examined whether students' perception of college environmental support for meaning searching moderates the relation between the presence of and search for meaning. Students'…

  18. Relationship between family support and quality of life of type-2 ...

    African Journals Online (AJOL)

    Materials and Methods: A cross-sectional study of 250 adult patients with type 2 diabetes mellitus was carried out over twenty (20) weeks. Respondents' family support was measured using Perceived Social Support – Family Scale {PSS- Fa}, while their quality of life was measured using the short version of the World Health ...

  19. Decision Support Systems for Research and Management in Advanced Life Support

    Science.gov (United States)

    Rodriquez, Luis F.

    2004-01-01

    Decision support systems have been implemented in many applications including strategic planning for battlefield scenarios, corporate decision making for business planning, production planning and control systems, and recommendation generators like those on Amazon.com(Registered TradeMark). Such tools are reviewed for developing a similar tool for NASA's ALS Program. DSS are considered concurrently with the development of the OPIS system, a database designed for chronicling of research and development in ALS. By utilizing the OPIS database, it is anticipated that decision support can be provided to increase the quality of decisions by ALS managers and researchers.

  20. Hybrid PSO–SVM-based method for forecasting of the remaining useful life for aircraft engines and evaluation of its reliability

    International Nuclear Information System (INIS)

    García Nieto, P.J.; García-Gonzalo, E.; Sánchez Lasheras, F.; Cos Juez, F.J. de

    2015-01-01

    The present paper describes a hybrid PSO–SVM-based model for the prediction of the remaining useful life of aircraft engines. The proposed hybrid model combines support vector machines (SVMs), which have been successfully adopted for regression problems, with the particle swarm optimization (PSO) technique. This optimization technique involves kernel parameter setting in the SVM training procedure, which significantly influences the regression accuracy. However, its use in reliability applications has not been yet widely explored. Bearing this in mind, remaining useful life values have been predicted here by using the hybrid PSO–SVM-based model from the remaining measured parameters (input variables) for aircraft engines with success. A coefficient of determination equal to 0.9034 was obtained when this hybrid PSO–RBF–SVM-based model was applied to experimental data. The agreement of this model with experimental data confirmed its good performance. One of the main advantages of this predictive model is that it does not require information about the previous operation states of the engine. Finally, the main conclusions of this study are exposed. - Highlights: • A hybrid PSO–SVM-based model is built as a predictive model of the RUL values for aircraft engines. • The remaining physical–chemical variables in this process are studied in depth. • The obtained regression accuracy of our method is about 95%. • The results show that PSO–SVM-based model can assist in the diagnosis of the RUL values with accuracy

  1. Reliable micro-measurement of strontium is the key to cracking the life-history code in the fish otolith

    International Nuclear Information System (INIS)

    Markwitz, A.; Grambole, D.; Herrmann, F.; Trompetter, W.J.; Dioses, T.; Gauldie, R.W.

    2000-01-01

    The fish otolith is a calcium carbonate (usually aragonite) crystal that grows continuously by accretion over the life of the fish and unlike bone is not continuously re-metabolised. Consequently, the otolith has long been regarded as a potential store of information about the life history of an individual fish, and this information is encoded in the deposition pattern of trace elements in the otolith. The code has been difficult to crack. However, recent developments have show that: (1) Sr is one of the few non-mobile trace elements in the otolith; and (2) the pattern of Sr deposition summarises the effects of environment changes that affect the growth rate of the otolith crystal. The remaining difficulties in cracking the chemical code in the otolith have hinged about making reliable micro-measurements of the stable Sr content at spatial resolutions of 10 μm or less; this interval represents about 4-6 days of otolith growth in most species of fish. This paper describes high beam resolution 2 μm linear measurements, and 6 μm square measurements over narrow windows of about 300 μm square, and links these micro-measures to macro-measures of 2D maps of the entire surface of sections of otoliths up to 5 mm square at beam resolutions of 25 μm square. The otoliths used in this study are from the Jurel, or Peruvian Jack mackerel, Trachurus murphyi (Carangidae: Teleostei)

  2. New Empirical Evidence on the Validity and the Reliability of the Early Life Stress Questionnaire in a Polish Sample.

    Science.gov (United States)

    Sokołowski, Andrzej; Dragan, Wojciech Ł

    2017-01-01

    Background: The Early Life Stress Questionnaire (ELSQ) is widely used to estimate the prevalence of negative events during childhood, including emotional, physical, verbal, sexual abuse, negligence, severe conflicts, separation, parental divorce, substance abuse, poverty, and so forth. Objective: This study presents the psychometric properties of the Polish adaptation of the ELSQ. It also verifies if early life stress (ELS) is a good predictor of psychopathology symptoms during adulthood. Materials and Methods: We analyzed data from two samples. Sample 1 was selected by random quota method from across the country and included 609 participants aged 18-50 years, 306 women (50.2%) and 303 men (49.8%). Sample 2 contained 503 young adults (253 women and 250 men) aged 18-25. Confirmatory and exploratory factor analyses were used to measure ELSQ internal consistency. The validity was based on the relation to psychopathological symptoms and substance misuse. Results: Results showed good internal consistency and validity. Exploratory factor analysis indicates a six-factor structure of the ELSQ. ELS was related to psychopathology in adulthood, including depressive, sociophobic, vegetative as well as pain symptoms. ELSQ score correlated also with alcohol use, but not nicotine dependence. Moreover, ELS was correlated with stress in adulthood. Conclusion: The findings indicate that the Polish version of the ELSQ is a valid and reliable instrument for assessing ELS in the Polish population and may be applied in both clinical and community samples.

  3. The role of interpersonal sensitivity, social support, and quality of life in rural older adults.

    Science.gov (United States)

    Wedgeworth, Monika; LaRocca, Michael A; Chaplin, William F; Scogin, Forrest

    The mental health of elderly individuals in rural areas is increasingly relevant as populations age and social structures change. While social support satisfaction is a well-established predictor of quality of life, interpersonal sensitivity symptoms may diminish this relation. The current study extends the findings of Scogin et al by investigating the relationship among interpersonal sensitivity, social support satisfaction, and quality of life among rural older adults and exploring the mediating role of social support in the relation between interpersonal sensitivity and quality of life (N = 128). Hierarchical regression revealed that interpersonal sensitivity and social support satisfaction predicted quality of life. In addition, bootstrapping resampling supported the role of social support satisfaction as a mediator between interpersonal sensitivity symptoms and quality of life. These results underscore the importance of nurses and allied health providers in assessing and attending to negative self-perceptions of clients, as well as the perceived quality of their social networks. Copyright © 2016 Elsevier Inc. All rights reserved.

  4. Living Arrangement and Life Satisfaction in Older Malaysians: The Mediating Role of Social Support Function

    Science.gov (United States)

    Kooshiar, Hadi; Yahaya, Nurizan; Hamid, Tengku Aizan; Abu Samah, Asnarulkhadi; Sedaghat Jou, Vajiheh

    2012-01-01

    Background This cross-sectional and correlational survey examines the association between different types of living arrangements and life satisfaction in older Malaysians, while taking into account the mediating effects of social support function. Methodology and Findings A total of 1880 of older adults were selected by multistage stratified sampling. Life satisfaction and social support were measured with the Philadelphia Geriatric Center Morale Scale and Medical Outcomes Study Social Support Survey. The result shows living with children as the commonest type of living arrangement for older adults in peninsular Malaysia. Compared to living alone, living only with a spouse especially and then co-residency with children were both associated with better life satisfaction (psocial support function (psocial support function enhanced the relation between living arrangements and life satisfaction. Conclusion This study revealed that types of living arrangement directly, and indirectly through social support function, play an important role in predicting life satisfaction for older adults in Malaysia. This study makes remarkable contributions to the Convoy model in older Malaysians. PMID:22912806

  5. International Space Station Environmental Control and Life Support System Status: 2008 - 2009

    Science.gov (United States)

    Williams, David E.; Gentry, Gregory J.; Gentry, Gregory J.

    2009-01-01

    The International Space Station (ISS) Environmental Control and Life Support (ECLS) system includes regenerative and non-regenerative technologies that provide the basic life support functions to support the crew, while maintaining a safe and habitable shirtsleeve environment. This paper provides a summary of the U.S. ECLS system activities over the past year, covering the period of time between March 2008 and February 2009. The ISS continued permanent crew operations, with the continuation of Phase 3 of the ISS Assembly Sequence. Work continues on the last of the Phase 3 pressurized elements and the continued manufacturing and testing of the regenerative ECLS equipment.

  6. International Space Station Environmental Control and Life Support System Status: 2009 - 2010

    Science.gov (United States)

    Williams, David E.; Dake, Jason R.; Gentry, Gregory J.

    2010-01-01

    The International Space Station (ISS) Environmental Control and Life Support (ECLS) system includes regenerative and non -regenerative technologies that provide the basic life support functions to support the crew, while maintaining a safe and habitable shirtsleeve environment. This paper provides a summary of the U.S. ECLS system activities over the past year, covering the period of time between March 2009 and February 2010. The ISS continued permanent crew operations, with the start of Phase 3 of the ISS Assembly Sequence and an increase of the ISS crew size from three to six. Work continues on the last of the Phase 3 pressurized elements.

  7. Monitoring and Evaluation; Statistical Support for Life-cycle Studies, 2003 Annual Report.

    Energy Technology Data Exchange (ETDEWEB)

    Skalski, John

    2003-12-01

    This report summarizes the statistical analysis and consulting activities performed under Contract No. 00004134, Project No. 199105100 funded by Bonneville Power Administration during 2003. These efforts are focused on providing real-time predictions of outmigration timing, assessment of life-history performance measures, evaluation of status and trends in recovery, and guidance on the design and analysis of Columbia Basin fish and wildlife studies monitoring and evaluation studies. The overall objective of the project is to provide BPA and the rest of the fisheries community with statistical guidance on design, analysis, and interpretation of monitoring data, which will lead to improved monitoring and evaluation of salmonid mitigation programs in the Columbia/Snake River Basin. This overall goal is being accomplished by making fisheries data readily available for public scrutiny, providing statistical guidance on the design and analyses of studies by hands-on support and written documents, and providing real-time analyses of tagging results during the smolt outmigration for review by decision makers. For a decade, this project has been providing in-season projections of smolt outmigration timing to assist in spill management. As many as 50 different fish stocks at 8 different hydroprojects are tracked and real-time to predict the 'percent of run to date' and 'date to specific percentile'. The project also conducts added-value analyses of historical tagging data to understand relationships between fish responses, environmental factors, and anthropogenic effects. The statistical analysis of historical tagging data crosses agency lines in order to assimilate information on salmon population dynamics irrespective of origin. The lessons learned from past studies are used to improve the design and analyses of future monitoring and evaluation efforts. Through these efforts, the project attempts to provide the fisheries community with reliable analyses

  8. The effect of social networks and social support on common mental disorders following specific life events.

    Science.gov (United States)

    Maulik, P K; Eaton, W W; Bradshaw, C P

    2010-08-01

    This study examined the association between life events and common mental disorders while accounting for social networks and social supports. Participants included 1920 adults in the Baltimore Epidemiologic Catchment Area Cohort who were interviewed in 1993-1996, of whom 1071 were re-interviewed in 2004-2005. Generalized estimating equations were used to analyze the data. Social support from friends, spouse or relatives was associated with significantly reduced odds of panic disorder and psychological distress, after experiencing specific life events. Social networks or social support had no significant stress-buffering effect. Social networks and social support had almost no direct or buffering effect on major depressive disorder, and no effect on generalized anxiety disorder and alcohol abuse or dependence disorder. The significant association between social support and psychological distress, rather than diagnosable mental disorders, highlights the importance of social support, especially when the severity of a mental health related problem is low.

  9. Perceived social support and life satisfaction in drug addicts: Self-esteem and loneliness as mediators.

    Science.gov (United States)

    Cao, Qilong; Liang, Ying

    2017-11-01

    This study was designed to investigate the mediation effects of both self-esteem and loneliness on the relationship between social support and subjective well-being in drug addicts. In all, 110 participants, all drug addicts from Guangdong Fangcun Brain Hospital, completed the questionnaire. Pearson's correlation analysis showed that perceived social support was positively related to self-esteem and life satisfaction and was negatively correlated with loneliness in drug addicts. Structural equation modeling estimated by the Bootstrap method indicated that loneliness and self-esteem partially mediated the association between perceived social support and life satisfaction. These findings provided insights into the association between perceived social support and life satisfaction in drug addicts.

  10. How Do Lessons Learned on the International Space Station (ISS) Help Plan Life Support for Mars?

    Science.gov (United States)

    Jones, Harry W.; Hodgson, Edward W.; Gentry, Gregory J.; Kliss, Mark H.

    2016-01-01

    How can our experience in developing and operating the International Space Station (ISS) guide the design, development, and operation of life support for the journey to Mars? The Mars deep space Environmental Control and Life Support System (ECLSS) must incorporate the knowledge and experience gained in developing ECLSS for low Earth orbit, but it must also meet the challenging new requirements of operation in deep space where there is no possibility of emergency resupply or quick crew return. The understanding gained by developing ISS flight hardware and successfully supporting a crew in orbit for many years is uniquely instructive. Different requirements for Mars life support suggest that different decisions may be made in design, testing, and operations planning, but the lessons learned developing the ECLSS for ISS provide valuable guidance.

  11. Drivers\\' Life Quality, Marital Satisfaction, and Social Support in Cargo Terminal of Yazd City

    Directory of Open Access Journals (Sweden)

    Mohammad Ali Morovati Sharifabadi

    2017-02-01

    Full Text Available Abstract Introduction: This is important to consider the health, social support, and marital satisfaction of drivers since they own one of the essential and stressful jobs in society. The purpose of this research was to investigate quality of life, marital satisfaction, and social support of the drivers referring to the cargo terminal of Yazd City. Methods: In order to collect data, 134 drivers in Yazd cargo terminal were selected. The ENRICH questionnaire of marital satisfaction, SF-36 questionnaire, and social support questionnaire (SSQ have been used as data collection tools. The collected data were then analyzed by Independent T test, Analysis of Variance (ANOVA, and Pearson correlation. Results: According to the results, the drivers' average age was 40.2±9.17 years old. The mean scores of marital satisfaction, quality of life, and social support were equal to 120.04±20.14 out of 175, 99.69±18.14 out of 149, and 15±4.76 out of 23, respectively. About 60.4 % of drivers were not satisfied with their jobs. There were significant relationships between weight and marital satisfaction (P=0.02, as well as between job satisfaction (P=0.003 (P=0.015 and income (P=0.047 (P=0.020, to social support and quality of life. Also, a strong significant positive relationship was observed in correlation coefficient between social support and two variables of quality of life and marital satisfaction (P=0.000. Conclusion: This can be argued that marital satisfaction, quality of life, and social support of the drivers are lower than the expected levels. Therefore, it can be concluded that physical and mental health of drivers can be effective on safety of roads; thereby it is necessary to improve their conditions in marital satisfaction, quality of life, and social support

  12. Introduction to the reliability and safety of mechanical supports. Einfuehrung in die Sicherheit und Zuverlaessigkeit von Tragwerken

    Energy Technology Data Exchange (ETDEWEB)

    Schueller, G I

    1981-01-01

    The book is divided into an introduction and three sections. The first section deals with the elements of statistics and the theory of probability. This section, providing also simple examples of application, is intended for such readers which up to now are not or only little familiar with the probabilistic philosophy and its application to problems of civil engineering. This section also is suited as an accompanying or supplementary text for an introductory lecture in this field and, as a matter of fact, is used as such by the author at Munich Technical University. The second section especially deals with the application of these methods to supporting structures, i.e. with the introduction to safety theory and reliability assessment of buildings. This section also treats the essential concepts and with the knowledge in probability theory and statistics already at hand or gained by studying the first section is easily understandable. Here also references are given concerning the elements of establishing standards and codes on the bases of probability theory. The last section deals with practical applications of safety reliability theory prepared in the preceeding section. This is done using engineering structures loaded by wind, seismic and wave forces.

  13. Work Life and Family Life Collide: Online Support for New Fathers.

    Science.gov (United States)

    Salzmann-Erikson, Martin

    2017-06-01

    The purpose of this investigation was to analyze online discussions about parental leave in relation to the work lives and private lives of new fathers. A netnographic study of nearly 100 discussion threads from a freely accessible online forum for fathers was conducted. Data were coded, sorted, and categorized by qualitative similarities and differences. The results of the study indicate that new fathers seek Internet forums to discuss work-related topics. Parental leave can provoke worries and anxiety related to management and co-worker attitudes which can create concern that they should be back at work. The results are presented in two categories: (a) attitudes expressed by employers and colleagues and (b) leaving work but longing to be back. The phenomenon of parental leave for fathers is more complex than simply "for" or "against" attitudes. Fathers can use Internet forums to discuss their experiences, fears, and anxiety and provide reasonable accommodations for both work and family life.

  14. Current activities in support of CANDU plant life management: an industry perspective

    International Nuclear Information System (INIS)

    Shalaby, B.A.; Price, E.G.; Hopkins, J.; Charlebois, P.

    1998-01-01

    The current focus of the CANDU industry is to position the nuclear option as a cost competitive, safe and reliable means of electricity production. To achieve its goal the CANDU industry as a whole is undertaking steps to improve further its performance and safety of its nuclear power plants. A number of programs have been planned and implemented particularly for plants in the mid-life range. Some of these programs include life assessment studies of critical systems, Structures and Components (SSCS), refurbishment and upgrading programs and monitoring and periodic inspection programs. Some elements of the programs have been in place from station start up and some are being instituted as part of the aging management and performance improvement program. The industry recognizes that the key to sustaining high performance over the life of the plant is the implementation of an integrated aging management program that encompasses all elements of plant operation and maintenance. A systematically implemented program on optimized maintenance and inspection strategy, standardized work processes, component rehabilitation programs, and applying lessons learned are some of the elements of a sustainable high performance and an effective plant life assurance program. The paper will describe the elements of an integrated program, the multiphase approach defined for CANDU PLIM and some of the activities undertaken by the industry to further improve and sustain plant safety, reliability and performance. (author)

  15. An Innovation in Learning and Teaching Basic Life Support: A Community Based Educational Intervention

    Directory of Open Access Journals (Sweden)

    Anne D Souza

    2018-01-01

    Full Text Available Background: Out of hospital deaths due to cardiac arrest would commonly occur because of the lack of awareness about the quick and right action to be taken. In this context the healthcare students undergo training in basic life support. However the lay persons are not exposed to such training. The present study was intended to train the auto drivers, the basic skills of basic life support by the medical and nursing students. Students got an opportunity to learn and teach the skills under the supervision of faculty. Methods: A total of fourteen students, 20 auto drivers of Manipal were included in the study population. The session on one and two rescuer cardio pulmonary resuscitation and relieving foreign body airway obstruction was conducted by the trained students for the auto drivers under the observation of the faculty. Prior knowledge of the study population was assessed by the pre-session questionnaire followed by a post-session questionnaire at the end of the session. The skill evaluation was carried out using a checklist. Results: The auto drivers participated in the session, gained required skills of providing basic life support. The students who trained the study population opined that they got an opportunity to teach basic life support which would help them build their teaching skills and confidence. Conclusion: The lay persons attaining basic life support skills have a high impact on the management of out of hospital cardiac arrest victims. Involving the healthcare students as instructors makes an innovation in learning.

  16. Spousal recovery support, recovery experiences, and life satisfaction crossover among dual-earner couples.

    Science.gov (United States)

    Park, YoungAh; Fritz, Charlotte

    2015-03-01

    Research has indicated the importance of recovery from work stress for employee well-being and work engagement. However, very little is known about the specific factors that may support or hinder recovery in the context of dual-earner couples. This study proposes spousal recovery support as a potential resource that dual-earner couples can draw on to enhance their recovery experiences and well-being. It was hypothesized that spousal recovery support would be related to the recipient spouse's life satisfaction via his or her own recovery experiences (i.e., psychological detachment, relaxation, and mastery experiences). The study further investigated the crossover of life satisfaction between working spouses as a potential outcome of recovery processes. Data from 318 full-time employed married couples in South Korea were analyzed using structural equation modeling. Results showed that spousal recovery support was positively related to all 3 recovery experiences of the recipient spouse. Moreover, this recovery support was related to the recipient spouse's life satisfaction via relaxation and mastery experiences. Unexpectedly, psychological detachment was negatively related to life satisfaction, possibly indicating a suppression effect. Life satisfaction crossed over between working spouses. No gender differences were found in the hypothesized paths. Based on these findings, theoretical and practical implications are discussed, and future research directions are presented. PsycINFO Database Record (c) 2015 APA, all rights reserved.

  17. Educational tool for modeling and simulation of a closed regenerative life support system

    Science.gov (United States)

    Arai, Tatsuya; Fanchiang, Christine; Aoki, Hirofumi; Newman, Dava J.

    For long term missions on the moon and Mars, regenerative life support systems emerge as a promising key technology for sustaining successful explorations with reduced re-supply logistics and cost. The purpose of this study was to create a simple model of a regenerative life support system which allows preliminary investigation of system responses. A simplified regenerative life support system was made with MATLAB Simulink ™. Mass flows in the system were simplified to carbon, water, oxygen and carbon dioxide. The subsystems included crew members, animals, a plant module, and a waste processor, which exchanged mass into and out of mass reservoirs. Preliminary numerical simulations were carried out to observe system responses. The simplified life support system model allowed preliminary investigation of the system response to perturbations such as increased or decreased number of crew members. The model is simple and flexible enough to add new components, and also possible to numerically predict non-linear subsystem functions and responses. Future work includes practical issues such as energy efficiency, air leakage, nutrition, and plant growth modeling. The model functions as an effective teaching tool about how a regenerative advanced life support system works.

  18. Guarantee of reliability of devices complexes for plastic tube welding

    International Nuclear Information System (INIS)

    Voskresenskij, L.A.; Zajtsev, A.I.; Nelyubov, V.I.; Fedorov, M.A.

    1988-01-01

    Results of calculations and experimental studies on providing reliability of complex for plastic tube welding are presented. Choice of reliability indeces and standards is based. Reliability levels of components are determined. The most waded details are calculated. It is shown that they meet the reqrurements of strength and reliability. Service life tests supported the correct choice of springs. Recommendations on elevating reliability are given. Directions of further developments are shown. 8 refs.; 2 figs.; 1 tab

  19. Socio-Demographic Factors, Social Support, Quality of Life, and HIV/AIDS in Ghana.

    Science.gov (United States)

    Abrefa-Gyan, Tina; Cornelius, Llewellyn J; Okundaye, Joshua

    2016-01-01

    The increase in the access to biomedical interventions for people living with HIV/AIDS in the developing world has not been adequately matched with the requisite psychosocial treatments to help improve the effectiveness of biomedical interventions. Therefore, in this study the author seeks to determine whether socio-demographic characteristics and social support are associated with quality of life in individuals diagnosed with HIV/AIDS in Ghana. A convenience sample of 300 HIV/AIDS support group members was obtained via cross-sectional design survey. The Medical Outcome Studies (MOS) HIV Health Survey, the MOS Social Support Survey (MOS-SSS), and demographic questionnaire instruments were used to assess quality of life, social support, and demographic information respectively. Multiple regression analysis showed that there was a positive association between overall social support and overall quality of life (r = .51). It also showed that being younger, male, attending support group meetings for over a year, and having ≥ 13 years of schooling related to higher quality of life. Implications of the findings for practice, policy, and research in Ghana and the rest of the developing world are discussed.

  20. Comparison of Quantity Versus Quality Using Performance, Reliability, and Life Cycle Cost Data. A Case Study of the F-15, F-16, and A-10 Aircraft.

    Science.gov (United States)

    1985-09-01

    CoC S~04 COMPARISON OF QUANTITY VERSUS QUALITY USING PERFORMANCE, RELIABILITY, AND LIFE CYCLE COST DATA. A CASE STUDY OF THE F-15, F-16, AND A-10...CYCLE COSTIATU.AT CAE AIR ORE HEO OG .- jAITR UIVERSITY W right.,Patterson Air Force Base, Ohio .! 5ൔ ,6 198 C.IT. U AF’IT/GSL,4/L3Q/65:S Ŗ J...COMPARISON OF QUANTITY VERSUS QUALITY USING PERFORMANCE, RELIABILITY, AND LIFE CYCLE COST DATA. A CASE STUDY OF THE F-15, F-16, AND A-10 AIRCRAFT THESIS David

  1. Quality of life and social support in patients with multiple sclerosis.

    Science.gov (United States)

    Rosiak, Katarzyna; Zagożdżon, Paweł

    2017-10-29

    Quality of life and needforsocial support in persons diagnosed with multiple sclerosis (MS) are to a large extent determined by the degree of their disability. The aim of the study was to analyze an association between specific forms of MS, subjectively perceived quality of life and social support. The study included subjects with established diagnosis of MS, treated at rehabilitation centers, hospitals and in a home setting, as well as the members of patient organizations. After being informed about objectives of the study, type of included tasks and way to complete them, each participant was handed out a set of questionnaires: Berlin Social Support Scales (Łuszczyńska, Kowalska, Schwarzer, Schulz), Quality of Life Questionnaire (WHOQOLBREF), as well as a survey developed specifically for the purposes of this project. The results were subjected to statistical analysis with STATA 12 package. The study included a total of 110 persons (67 women and 43 men). Quality of life overall, as well in physical, psychological, social relationships and environmental health domains, turned out to be particularly important in patients with primary-progressive MS. Irrespective of MS type, social support overall did not play a significant role on univariate analysis. However, subgroup analysis according to sex demonstrated that men with MS received social support four times less often than women. Quality of life in individuals with primary-progressive MS is significantly lower than in patients presenting with other types of this disease. Men with MS are more likely to present with worse scores for social support overall. They are less likely both to acknowledge the need for support and to realize the availability of support they actually need.

  2. A life cycle framework to support materials selection for Ecodesign: A case study on biodegradable polymers

    International Nuclear Information System (INIS)

    Ribeiro, I.; Peças, P.; Henriques, E.

    2013-01-01

    Highlights: • Life cycle framework to support material selection in Ecodesign. • Early design stage estimates and sensitivity analyses based on process-based models. • Sensitivity analysis to product geometry, industrial context and EoL scenarios. • Cost and environmental performance comparison – BDP vs. fossil based polymers. • Best alternatives mapping integrating cost and environmental performances. - Abstract: Nowadays society compels designers to develop more sustainable products. Ecodesign directs product design towards the goal of reducing environmental impacts. Within Ecodesign, materials selection plays a major role on product cost and environmental performance throughout its life cycle. This paper proposes a comprehensive life cycle framework to support Ecodesign in material selection. Dealing with new materials and technologies in early design stages, process-based models are used to represent the whole life cycle and supply integrated data to assess material alternatives, considering cost and environmental dimensions. An integrated analysis is then proposed to support decision making by mapping the best alternative materials according to the importance given to upstream and downstream life phases and to the environmental impacts. The proposed framework is applied to compare the life cycle performance of injection moulded samples made of four commercial biodegradable polymers with different contents of Thermo Plasticized Starch and PolyLactic Acid and a common fossil based polymer, Polypropylene. Instead of labelling materials just as “green”, the need to fully capture all impacts in the whole life cycle was shown. The fossil based polymer is the best economic alternative, but polymers with higher content of Thermo Plasticized Starch have a better environmental performance. However, parts geometry and EoL scenarios play a major role on the life cycle performance of candidate materials. The selection decision is then supported by mapping

  3. Basic life support and children with profound and multiple learning disabilities.

    Science.gov (United States)

    Cash, Stefan; Shinnick-Page, Andrea

    2008-10-01

    Nurses and other carers of people with learning disabilities must be able to manage choking events and perform basic life support effectively. UK guidelines for assessment of airway obstruction and for resuscitation do not take account of the specific needs of people with profound multiple learning disability. For example, they fail to account for inhibited gag and coughing reflexes, limited body movements or chest deformity. There are no national guidelines to assist in clinical decisions and training for nurses and carers. Basic life support training for students of learning disability nursing at Birmingham City University is supplemented to address these issues. The authors ask whether such training should be provided for all nurses including those caring for children and young people. They also invite comment and discussion on questions related to chest compression and training in basic life support for a person in a seated position.

  4. Model implementation for dynamic computation of system cost for advanced life support

    Science.gov (United States)

    Levri, J. A.; Vaccari, D. A.

    2004-01-01

    Life support system designs for long-duration space missions have a multitude of requirements drivers, such as mission objectives, political considerations, cost, crew wellness, inherent mission attributes, as well as many other influences. Evaluation of requirements satisfaction can be difficult, particularly at an early stage of mission design. Because launch cost is a critical factor and relatively easy to quantify, it is a point of focus in early mission design. The method used to determine launch cost influences the accuracy of the estimate. This paper discusses the appropriateness of dynamic mission simulation in estimating the launch cost of a life support system. This paper also provides an abbreviated example of a dynamic simulation life support model and possible ways in which such a model might be utilized for design improvement. c2004 COSPAR. Published by Elsevier Ltd. All rights reserved.

  5. International Space Station Environmental Control and Life Support System Status: 2011-2012

    Science.gov (United States)

    Williams, David E.; Dake, Jason R.; Gentry, Gregory J.

    2011-01-01

    The International Space Station (ISS) Environmental Control and Life Support (ECLS) system includes regenerative and non-regenerative technologies that provide the basic life support functions to support the crew, while maintaining a safe and habitable shirtsleeve environment. This paper provides a summary of the U.S. ECLS system activities over the past year and the impacts of the international partners activities on them, covering the period of time between March 2011 and February 2012. The ISS continued permanent crew operations including the continuation of six crew members being on ISS. Work continues on the commercial cargo resupply vehicles, and work to try and extend ISS service life from 2015 to no later than 2028. 1

  6. Canadians' support for radical life extension resulting from advances in regenerative medicine.

    Science.gov (United States)

    Dragojlovic, Nick

    2013-04-01

    This paper explores Canadian public perceptions of a hypothetical scenario in which a radical increase in life expectancy results from advances in regenerative medicine. A national sample of 1231 adults completed an online questionnaire on stem cell research and regenerative medicine, including three items relating to the possibility of Canadians' average life expectancy increasing to 120 years by 2050. Overall, Canadians are strongly supportive of the prospect of extended lifespans, with 59% of the sample indicating a desire to live to 120 if scientific advances made it possible, and 47% of respondents agreeing that such increases in life expectancy are possible by 2050. The strongest predictors of support for radical life extension are individuals' general orientation towards science and technology and their evaluation of its plausibility. These results contrast with previous research, which has suggested public ambivalence for biomedical life extension, and point to the need for more research in this area. They suggest, moreover, that efforts to increase public awareness about anti-aging research are likely to increase support for the life-extending consequences of that research program. Copyright © 2013 Elsevier Inc. All rights reserved.

  7. Research on bearing life prediction based on support vector machine and its application

    International Nuclear Information System (INIS)

    Sun Chuang; Zhang Zhousuo; He Zhengjia

    2011-01-01

    Life prediction of rolling element bearing is the urgent demand in engineering practice, and the effective life prediction technique is beneficial to predictive maintenance. Support vector machine (SVM) is a novel machine learning method based on statistical learning theory, and is of advantage in prediction. This paper develops SVM-based model for bearing life prediction. The inputs of the model are features of bearing vibration signal and the output is the bearing running time-bearing failure time ratio. The model is built base on a few failed bearing data, and it can fuse information of the predicted bearing. So it is of advantage to bearing life prediction in practice. The model is applied to life prediction of a bearing, and the result shows the proposed model is of high precision.

  8. Screw Remaining Life Prediction Based on Quantum Genetic Algorithm and Support Vector Machine

    Directory of Open Access Journals (Sweden)

    Xiaochen Zhang

    2017-01-01

    Full Text Available To predict the remaining life of ball screw, a screw remaining life prediction method based on quantum genetic algorithm (QGA and support vector machine (SVM is proposed. A screw accelerated test bench is introduced. Accelerometers are installed to monitor the performance degradation of ball screw. Combined with wavelet packet decomposition and isometric mapping (Isomap, the sensitive feature vectors are obtained and stored in database. Meanwhile, the sensitive feature vectors are randomly chosen from the database and constitute training samples and testing samples. Then the optimal kernel function parameter and penalty factor of SVM are searched with the method of QGA. Finally, the training samples are used to train optimized SVM while testing samples are adopted to test the prediction accuracy of the trained SVM so the screw remaining life prediction model can be got. The experiment results show that the screw remaining life prediction model could effectively predict screw remaining life.

  9. A Discussion of Oxygen Recovery Definitions and Key Performance Parameters for Closed-Loop Atmosphere Revitalization Life Support Technology Development

    Science.gov (United States)

    Abney, Morgan B.; Perry, Jay L.

    2016-01-01

    Over the last 55 years, NASA has evolved life support for crewed space exploration vehicles from simple resupply during Project Mercury to the complex and highly integrated system of systems aboard the International Space Station. As NASA targets exploration destinations farther from low Earth orbit and mission durations of 500 to 1000 days, life support systems must evolve to meet new requirements. In addition to having more robust, reliable, and maintainable hardware, limiting resupply becomes critical for managing mission logistics and cost. Supplying a crew with the basics of food, water, and oxygen become more challenging as the destination ventures further from Earth. Aboard ISS the Atmosphere Revitalization Subsystem (ARS) supplies the crew's oxygen demand by electrolyzing water. This approach makes water a primary logistics commodity that must be managed carefully. Chemical reduction of metabolic carbon dioxide (CO2) provides a method of recycling oxygen thereby reducing the net ARS water demand and therefore minimizing logistics needs. Multiple methods have been proposed to achieve this recovery and have been reported in the literature. However, depending on the architecture and the technology approach, "oxygen recovery" can be defined in various ways. This discontinuity makes it difficult to compare technologies directly. In an effort to clarify community discussions of Oxygen Recovery, we propose specific definitions and describe the methodology used to arrive at those definitions. Additionally, we discuss key performance parameters for Oxygen Recovery technology development including challenges with comparisons to state-of-the-art.

  10. Trends in biomedical engineering: focus on Patient Specific Modeling and Life Support Systems.

    Science.gov (United States)

    Dubini, Gabriele; Ambrosi, Davide; Bagnoli, Paola; Boschetti, Federica; Caiani, Enrico G; Chiastra, Claudio; Conti, Carlo A; Corsini, Chiara; Costantino, Maria Laura; D'Angelo, Carlo; Formaggia, Luca; Fumero, Roberto; Gastaldi, Dario; Migliavacca, Francesco; Morlacchi, Stefano; Nobile, Fabio; Pennati, Giancarlo; Petrini, Lorenza; Quarteroni, Alfio; Redaelli, Alberto; Stevanella, Marco; Veneziani, Alessandro; Vergara, Christian; Votta, Emiliano; Wu, Wei; Zunino, Paolo

    2011-01-01

    Over the last twenty years major advancements have taken place in the design of medical devices and personalized therapies. They have paralleled the impressive evolution of three-dimensional, non invasive, medical imaging techniques and have been continuously fuelled by increasing computing power and the emergence of novel and sophisticated software tools. This paper aims to showcase a number of major contributions to the advancements of modeling of surgical and interventional procedures and to the design of life support systems. The selected examples will span from pediatric cardiac surgery procedures to valve and ventricle repair techniques, from stent design and endovascular procedures to life support systems and innovative ventilation techniques.

  11. Integration, design, and construction of a CELSS breadboard facility for bioregenerative life support system research

    Science.gov (United States)

    Prince, R.; Knott, W.; Buchanan, Paul

    1987-01-01

    Design criteria for the Biomass Production Chamber (BPC), preliminary operating procedures, and requirements for the future development of the Controlled Ecological Life Support System (CELSS) are discussed. CELSS, which uses a bioregenerative system, includes the following three major units: (1) a biomass production component to grow plants under controlled conditions; (2) food processing components to derive maximum edible content from all plant parts; and (3) waste management components to recover and recycle all solids, liquids, and gases necessary to support life. The current status of the CELSS breadboard facility is reviewed; a block diagram of a simplified version of CELSS and schematic diagrams of the BPS are included.

  12. Work-related social support modulates effects of early life stress on limbic reactivity during stress.

    Science.gov (United States)

    Leicht-Deobald, Ulrich; Bruch, Heike; Bönke, Luisa; Stevense, Amie; Fan, Yan; Bajbouj, Malek; Grimm, Simone

    2017-12-15

    Early life stress (ELS) affects stress- reactivity via limbic brain regions implicated such as hippocampus and amygdala. Social support is a major protective factor against ELS effects, while subjects with ELS experience reportedly perceive less of it in their daily life. The workplace, where most adults spend a substantial amount of time in their daily lives, might serve as a major resource for social support. Since previous data demonstrated that social support attenuates stress reactivity, we here used a psychosocial stress task to test the hypothesis that work-related social support modulates the effects of ELS. Results show decreased amygdala reactivity during stress in ELS subjects who report high levels of work- related social support, thereby indicating a signature for reduced stress reactivity. However, this effect was only observable on the neural, but not on the behavioral level, since social support had no buffering effect regarding the subjective experience of stress in daily life as well as regarding feelings of uncontrollability induced by the stress task. Accordingly, our data suggest that subjects with ELS experiences might benefit from interventions targeted at lowering their subjective stress levels by helping them to better perceive the availability of social support in their daily lives.

  13. Pilot Mental Health, Negative Life Events, and Improving Safety with Peer Support and a Just Culture.

    Science.gov (United States)

    Mulder, Sanne; de Rooy, Diederik

    2018-01-01

    In the last 35 yr, 17 commercial aviation accidents and incidents, with 576 fatalities, could likely have been attributed to mental disease of a pilot. Screening tools for mental health risks in airline pilots are needed. There is growing interest in pilot peer-support programs and how to incorporate them in a just culture, meaning that pilots can report mental health complaints without a risk of job or income loss. We combined findings from aviation accidents and incidents with a search of scientific literature to provide data-based recommendations for screening, peer-support, and a just culture approach to mental health problems. Commercial aviation accidents and incidents in which a mental disorder of a pilot was thought to play a role were reviewed. Subsequently, PubMed and PsychInfo literature searches were performed on peer-support programs, just culture human resource management, and the risk of negative life events on developing suicidal ideation and behavior in comparable professional groups. Lethal accidents were mostly related to impaired coping with negative life events. Negative life events are clearly related to suicidal thoughts, attempts, and completed suicide. A protective effect of peer-support programs on mental health problems has not been established, although peer-support programs are generally appreciated by those involved. We did not find relevant literature on just culture. Negative life events are likely a useful screening tool for mental health risks. There is still a lack of evidence on how peer-support groups should be designed and how management of mental health risks can be implemented in a just culture.Mulder S, de Rooy D. Pilot mental health, negative life events, and improving safety with peer support and a just culture. Aerosp Med Hum Perform. 2018; 89(1):41-51.

  14. Contribution of Enterprise Asset Management (EAM) systems and CAP programs to support NPP life extension program

    International Nuclear Information System (INIS)

    Luanco, E.

    2007-01-01

    There is no specific IS (Information System) which supports the entire scope of a plant life extension, but there are a number of existing solutions that contributes to support it. Globally there are 2 categories of IS solution in the market: those supporting the Plant Life Improvement (PLIM) side of the life extension program and the others supporting the Plant Life Extension (PLEX) process side of it. The first category involves a large number of applications that span from ageing evaluation criteria programs, to monitoring solution for the critical components and to analysis and decision tools. The second category comprises solutions which support partially or globally the overall business process under a regulatory controlled manner. Both categories require 3 conditions to be satisfied: -) a comprehensive set of data (these data are often produced by various applications and the ability to correlate all the data together with a high degree of integrity is an important success factor); -) a feedback mechanism whose dual aspect is the monitoring of the ageing phenomena and the management of all the actions to be coordinated to ensure that preset objectives will be achieved in due time; and -) good people management to ensure particularly that staff will be well acquainted with new equipment or with new operating processes

  15. Crop Production for Advanced Life Support Systems - Observations From the Kennedy Space Center Breadboard Project

    Science.gov (United States)

    Wheeler, R. M.; Sager, J. C.; Prince, R. P.; Knott, W. M.; Mackowiak, C. L.; Stutte, G. W.; Yorio, N. C.; Ruffe, L. M.; Peterson, B. V.; Goins, G. D.

    2003-01-01

    The use of plants for bioregenerative life support for space missions was first studied by the US Air Force in the 1950s and 1960s. Extensive testing was also conducted from the 1960s through the 1980s by Russian researchers located at the Institute of Biophysics in Krasnoyarsk, Siberia, and the Institute for Biomedical Problems in Moscow. NASA initiated bioregenerative research in the 1960s (e.g., Hydrogenomonas) but this research did not include testing with plants until about 1980, with the start of the Controlled Ecological Life Support System (CELSS) Program. The NASA CELSS research was carried out at universities, private corporations, and NASA field centers, including Kennedy Space Center (KSC). The project at KSC began in 1985 and was called the CELSS Breadboard Project to indicate the capability for plugging in and testing various life support technologies; this name has since been dropped but bioregenerative testing at KSC has continued to the present under the NASA s Advanced Life Support (ALS) Program. A primary objective of the KSC testing was to conduct pre-integration tests with plants (crops) in a large, atmospherically closed test chamber called the Biomass Production Chamber (BPC). Test protocols for the BPC were based on observations and growing procedures developed by university investigators, as well as procedures developed in plant growth chamber studies at KSC. Growth chamber studies to support BPC testing focused on plant responses to different carbon dioxide (CO2) concentrations, different spectral qualities from various electric lamps, and nutrient film hydroponic culture techniques.

  16. Disclosure strategies, social support, and quality of life in infertile women.

    Science.gov (United States)

    Steuber, Keli R; High, Andrew

    2015-07-01

    Do the strategies women use to disclose information about their infertility to social network members impact the quality of the support they receive and their quality of life? The data showed that women who disclosed infertility-related information in direct ways, rather than in indirect ways (e.g. by incremental disclosures or through third parties), to social network members perceived higher quality support and reported greater quality of life related to their infertility experience. Social support has been shown to buffer stress associated with various health issues including infertility. The way people disclose information about stressors has been associated with the quality of the support they receive. Disclosing information in a way that most effectively elicits support is beneficial because women with infertility who have lower levels of stress are more likely to seek and remain in treatment. This cross-sectional study of 301 infertile women was conducted in the USA. To determine the variation in length of infertility and treatment decisions, we conducted an online survey of 301 American women coping with infertility. We investigated the strategies women used to disclose infertility-related information with social network members, their perceptions of support from friends and family, and their quality of life both in general (overall quality of life) and related to the experience of infertility (fertility quality of life). Direct disclosure of experiences related to infertility was positively and significantly associated with the perceived quality of social support received (P women's fertility quality of life (95% CI: 0.18, 1.05) and overall quality of life (95% CI: 0.10, 0.30). This effect is particularly noteworthy for the model predicting fertility quality of life, which exhibited a non-significant main effect with direct disclosures. The non-significant main effect combined with the significant indirect effect suggests that perceived support quality

  17. Evaluation of engineering foods for Controlled Ecological Life Support Systems (CELSS)

    Science.gov (United States)

    Karel, M.

    1982-01-01

    The feasibility of developing acceptable and reliable engineered foods for use in controlled ecological support systems (CELSS) was evaluated. Food resupply and regeneration are calculated, flow charts of food processes in a multipurpose food pilot plant are presented, and equipment for a multipurpose food pilot plant and potential simplification of processes are discussed. Food-waste treatment and water usage in food processing and preparation are also considered.

  18. Analysis and Application of Reliability

    International Nuclear Information System (INIS)

    Jeong, Hae Seong; Park, Dong Ho; Kim, Jae Ju

    1999-05-01

    This book tells of analysis and application of reliability, which includes definition, importance and historical background of reliability, function of reliability and failure rate, life distribution and assumption of reliability, reliability of unrepaired system, reliability of repairable system, sampling test of reliability, failure analysis like failure analysis by FEMA and FTA, and cases, accelerated life testing such as basic conception, acceleration and acceleration factor, and analysis of accelerated life testing data, maintenance policy about alternation and inspection.

  19. Towards life-cycle awareness in decision support tools for engineering design

    OpenAIRE

    Nergård, Henrik; Sandberg, Marcus; Larsson, Tobias

    2009-01-01

    In this paper a decision support tool with the focus on how to generate and visualize decision base coupled to the business agreement is outlined and discussed. Decision support tools for the early design phases are few and especially tools that visualize the readiness level of activities throughout the product life-cycle. Aiming for the sustainable society there is an indication that business-to-business manufacturers move toward providing a function rather than selling off the hardware and ...

  20. Daily life support for older adults evaluated by commissioned welfare volunteers

    OpenAIRE

    Onishi, Joji

    2016-01-01

    Japan has a unique system of commissioned welfare volunteers who are familiar with neighborhoods and can identify the households requiring assistance and connect them to public support. In the present study, an anonymous self-rated questionnaire was delivered to commissioned welfare volunteers to clarify the daily life supports provided for elderly households requiring assistance, and 2270 data were collected. The questionnaires included information about elderly households requiring assistan...

  1. Comparison of fixed implant-supported prostheses, removable implant-supported prostheses, and complete dentures: patient satisfaction and oral health-related quality of life.

    Science.gov (United States)

    Oh, Sung-Hee; Kim, Younhee; Park, Joo-Yeon; Jung, Yea Ji; Kim, Seong-Kyun; Park, Sun-Young

    2016-02-01

    The purpose of this study was to compare patient satisfaction and oral health-related quality of life (OHRQoL) among fully edentulous patients treated with either fixed implant-supported prostheses (FP), removable implant-supported prostheses (RP), or complete dentures (CD). Eighty-six patients - 29 FP, 27 RP, and 30 CD patients - participated in this study. The survey was conducted using face-to-face interviews with a questionnaire that included a patient satisfaction scale and Oral Health Impact Profile (OHIP-14). We measured patient satisfaction after prosthetic treatments and OHRQoL before and after the treatments. After prosthetic treatments, OHRQoL increased in all three groups (P patient satisfaction and OHRQoL, and both groups showed greater improvement compared with the CD group. Specifically, the OHRQoL dimensions of functional limitation, physical pain, psychological discomfort, and psychological disability in the FP group, and functional limitation in the RP group, improved greatly in comparison with the CD group (P patient satisfaction than the CD treatment. Reliable information of OHRQoL and patient satisfaction helps experts and patients choose the best prosthetic treatment option. © 2014 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  2. Early-Life Parent-Child Relationships and Adult Children's Support of Unpartnered Parents in Later Life.

    Science.gov (United States)

    Lin, I-Fen; Wu, Hsueh-Sheng

    2018-02-08

    The proportion of older adults who are unpartnered has increased significantly over the past 25 years. Unpartnered older adults often rely on their adult children for support. Most previous studies have focused on proximal factors associated with adult children's support of their parents, while few have examined distal factors, such as parent-child relationships formed during childhood. This study fills the gap by investigating the direct and indirect associations between early-life parent-child relationships and adult children's upward transfers to unpartnered parents. Data came from two supplements to the Panel Study of Income Dynamics, in which respondents were asked about their relationships with mothers and fathers before age 17 and their transfers of time and money to parents in 2013. Path models were estimated for unpartnered mother-adult child dyads and father-adult child dyads separately. For adult children of unpartnered mothers, psychological closeness has a direct, positive association with time transfer, while physical violence has an indirect association with time transfer through adult children's marital status. For adult children of unpartnered fathers, psychological closeness has neither a direct nor an indirect association with time or money transfer, but physical violence has a direct, negative association with time transfer. Early-life parent-child relationships play a pivotal role in influencing adult children's caregiving behavior, both directly and indirectly. Our findings suggest that by improving their relationships with children early in life, parents may be able to increase the amount of time transfer that they receive in late life. © The Author(s) 2018. Published by Oxford University Press on behalf of The Gerontological Society of America. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  3. Mining Available Data from the United States Environmental Protection Agency to Support Rapid Life Cycle Inventory Modeling of Chemical Manufacturing

    Science.gov (United States)

    Demands for quick and accurate life cycle assessments create a need for methods to rapidly generate reliable life cycle inventories (LCI). Data mining is a suitable tool for this purpose, especially given the large amount of available governmental data. These data are typically a...

  4. 24. MPA-seminar: safety and reliability of plant technology with special emphasis on integrity and life management. Vol. 1. Papers 1-27

    International Nuclear Information System (INIS)

    1999-01-01

    The first volume is dedicated to the safety and reliability of plant technology with special emphasis on the integrity and life management. The main topic in the volume is the contribution of nondestructive testing to the reactor safety from an international point of view. All 20 papers are separately analyzed for this database. (orig.)

  5. Resilience As A Mediator Between Affect, Coping Styles, Support and Life Satisfaction

    Directory of Open Access Journals (Sweden)

    Ozlem Kelle

    2018-06-01

    Full Text Available As humans, we are always targets of many positive and negative life events in which we would show differences in dealing with those events. In this study, the aim was to investigate how individuals react to stressful situations through the concept of resilience. Therefore it was aimed to test the role of individual characteristics of affect and coping styles in addition to receiving support from family and social environment on resilience. The role of resilience in life satisfaction was also investigated. A survey was used including demographic questions, ego resilience scale, positive and negative affect scale, stress coping styles inventory, and satisfaction with life scale. Target of the study was individuals who were over 18 years of age and 403 participants were reached through snowball sampling. Seventy six percent of the participants were female (n=310 and 24% of them were male (n=93. Hypothesized model was tested by using path analysis. Study results showed that positive affect, optimistic coping style and confident coping style were significant predictors of resilience as individual characteristics in addition to receiving social support. Resilience was found as a significant predictor of life satisfaction. Moreover, resilience was also found as a significant mediator of the relationships between positive affect, optimistic coping, confident coping styles, receiving social support and life satisfaction. Importance of the study in the field of psychology and suggestions for future research were also discussed with relevant literature.

  6. Health-related quality of life: validity, reliability, and responsiveness of SF-36, 15D, EQ-5D RAQoL, and HAQ in patients with rheumatoid arthritis

    DEFF Research Database (Denmark)

    Linde, L.; Sørensen, J.; Østergaard, Morten

    2008-01-01

    OBJECTIVE: To compare validity, reliability, and responsiveness of generic and disease specific health-related quality of life (HRQOL) instruments in rheumatoid arthritis (RA). METHODS: Two samples of patients completed the Medical Outcomes Study Short Form-36 Health Survey (SF-36), EuroQol (EQ)-5D...... and VAS pain were responsive to both improvement and deterioration. CONCLUSION: All instruments were valid measures for HRQOL in RA. The RAQoL and HAQ displayed the best reliability, while the SF-36 bodily pain scale and VAS pain were the most responsive. The choice of instrument should depend......, 15D, Rheumatoid Arthritis Quality of Life Scale (RAQoL), Health Assessment Questionnaire (HAQ), and visual analog scales (VAS) for pain, fatigue, and global RA. Validity (convergent, discriminant, and known-groups) was evaluated in a cross-section of 200 patients. Reliability was evaluated...

  7. The effect of social support on the quality of life of patients with multiple sclerosis

    Directory of Open Access Journals (Sweden)

    David Castro Costa

    2012-02-01

    Full Text Available OBJECTIVE: To determine the predictive value of social support on health related quality of life (HRQoL in multiple sclerosis (MS patients. METHODS: The sample is composed by 150 MS consecutive patients. We used the Medical Outcomes Study Social Support Survey to assess social support and the Health Status Questionnaire to assess HRQoL. For inferential analysis, we used the Multiple Linear Regression with stepwise selection of variables. RESULTS: The age, basic education, psychological support and disability explains 41.6% of the variance in physical function, 29.4% in physical performance and 30.6% in emotional performance. Age and psychological support explains 23.1% of the variance in physical function and 29.4% in vitality. CONCLUSION: This study demonstrated that social support is a predictor with a significant effect on HRQoL in MS.

  8. Preparation and analysis of standardized waste samples for Controlled Ecological Life Support Systems (CELSS)

    Science.gov (United States)

    Carden, J. L.; Browner, R.

    1982-01-01

    The preparation and analysis of standardized waste samples for controlled ecological life support systems (CELSS) are considered. Analysis of samples from wet oxidation experiments, the development of ion chromatographic techniques utilizing conventional high pressure liquid chromatography (HPLC) equipment, and an investigation of techniques for interfacing an ion chromatograph (IC) with an inductively coupled plasma optical emission spectrometer (ICPOES) are discussed.

  9. Comparison of Two Modes of Delivery of First Aid Training Including Basic Life Support

    Science.gov (United States)

    Lippmann, John; Livingston, Patricia; Craike, Melinda J.

    2011-01-01

    Aims: Flexible-learning first aid courses are increasingly common due to reduced classroom contact time. This study compared retention of first aid knowledge and basic life support (BLS) skills three months after a two-day, classroom-based first aid course (STD) to one utilizing on-line theory learning at home followed by one day of classroom…

  10. First aid and basic life support: a questionnaire survey of medical schools in the Netherlands.

    NARCIS (Netherlands)

    Tan, E.C.T.H.; Hekkert, K.D.; Vugt, A.B. van; Biert, J.

    2010-01-01

    PURPOSE: Adequate education in first aid and basic life support (BLS) should be considered as an essential aspect of the medical curriculum. The objective of this study was to investigate the current medical training in first aid and BLS at all 8 medical schools in the Netherlands. SUMMARY: An

  11. Services and Supports, Partnership, and Family Quality of Life: Focus on Deaf-Blindness

    Science.gov (United States)

    Kyzar, Kathleen B.; Brady, Sara E.; Summers, Jean Ann; Haines, Shana J.; Turnbull, Ann P.

    2016-01-01

    In this study, the authors examined the moderating effects of partnership on the relationship between services and supports adequacy and family quality of life (FQOL) for families of children with deaf-blindness ages birth to 21. A social-ecological approach enabled examining the impact of disability on the family system. A survey, consisting of…

  12. Retention of first aid and basic life support skills in undergraduate medical students

    NARCIS (Netherlands)

    Ruijter, P.A. de; Biersteker, H.A.; Biert, J.; Goor, H. van; Tan, E.C.T.H.

    2014-01-01

    BACKGROUND: Undergraduate medical students follow a compulsory first aid (FA) and basic life support (BLS) course. Retention of BLS seems poor and only little information is provided on the retention of FA skills. This study aims at evaluating 1- and 2-year retention of FA and BLS training in

  13. Development of a decision support model for determining building life-cycle strategies in the Netherlands

    NARCIS (Netherlands)

    Binnemars, S.; Halman, Johannes I.M.; Durmisevic, Elma; Durmisevic, E.; Pasic, A.

    2012-01-01

    Over recent years, it has become increasingly apparent that there is a growing need for so-called green buildings with a lower environmental impact over the whole building life-cycle. The construction industry demands strategies that support a drastic change of the way we develop, construct and

  14. Mediating Effects of Social Support on Quality of Life for Parents of Adults with Autism

    Science.gov (United States)

    Marsack, Christina N.; Samuel, Preethy S.

    2017-01-01

    The aim of this study was to examine the mediating effect of formal and informal social support on the relationship of caregiver burden and quality of life (QOL), using a sample of 320 parents (aged 50 or older) of adult children with autism spectrum disorder (ASD). Multiple linear regression and mediation analyses indicated that caregiver burden…

  15. Evaluation of the effects of the Advanced Paediatric Life-Support course

    NARCIS (Netherlands)

    Turner, N.M.

    2008-01-01

    Doctors are generally unacceptably poor at resuscitation and this has been shown to lead to unnecessary mortality. This problem has led to the development of structured resuscitation training in the form of life-support courses, which have become very popular and are widely advocated, but which are

  16. Coping, social support, job satisfaction, and work/life imbalance / Mianda Smith

    OpenAIRE

    Smith, Mianda

    2006-01-01

    This mini dissertation focuses on the effects of coping on job satisfaction when job insecurity is being experienced by a group of managers in a South African mining company. The second part of the dissertation deals with role conflict, goal clarity, and how social support affects work/life imbalance. Thesis (M.Com. (Industrial Psychology))--North-West University, Potchefstroom Campus, 2007.

  17. Long-term intended and unintended experiences after Advanced Life Support training

    DEFF Research Database (Denmark)

    Rasmussen, M.B.; Dieckmann, Peter; Issenberg, Berry

    2012-01-01

    Highly structured simulation-based training (SBT) on managing emergency situations can have a significant effect on immediate satisfaction and learning. However, there are some indications of problems when applying learned skills to practice. The aim of this study was to identify long-term intended...... and unintended learner reactions, experiences and reflections after attending a simulation based Advanced Life Support (ALS) course....

  18. Potential of life cycle assessment to support environmental decision making at commercial dairy farms

    NARCIS (Netherlands)

    Meul, M.; Middelaar, van C.E.; Boer, de I.J.M.; Passel, van S.; Fremaut, D.; Haesaert, G.

    2014-01-01

    In this paper, we evaluate the potential of life cycle assessment (LCA) to support environmental decision making at commercial dairy farms. To achieve this, we follow a four-step method that allows converting environmental assessment results using LCA into case-specific advice for farmers. This is

  19. A Living Laboratory Exploring Mobile Support for Everyday Life with Diabetes

    DEFF Research Database (Denmark)

    Kanstrup, Anne Marie; Bjerge, Kim; Kristensen, Jens E.

    2010-01-01

    The paper presents the set up of a Living Laboratory in a city of North Denmark exploring mobile support for everyday life with diabetes. Background and definitions of the living lab method is presented together with descriptions of the technical setup, applications and explorations. The living l...

  20. Advanced medical life support procedures in vitally compromised children by a helicopter emergency medical service.

    NARCIS (Netherlands)

    Gerritse, B.M.; Schalkwijk, A.; Pelzer, B.J.; Scheffer, G.J.; Draaisma, J.M.T.

    2010-01-01

    BACKGROUND: To determine the advanced life support procedures provided by an Emergency Medical Service (EMS) and a Helicopter Emergency Medical Service (HEMS) for vitally compromised children. Incidence and success rate of several procedures were studied, with a distinction made between procedures