WorldWideScience

Sample records for reliability subcontract activities

  1. Photovoltaic Subcontract Program, FY 1990

    Energy Technology Data Exchange (ETDEWEB)

    Summers, K.A. (ed.)

    1991-03-01

    This report summarizes the progress of the subcontracted photovoltaic (PV) research and development (R D) performed under the Photovoltaics Program at the Solar Energy Research Institute (SERI). The SERI subcontracted PV research and development represents most of the subcontracted R D that is funded by the US Department of Energy (DOE) National Photovoltaics Program. This report covers fiscal year (FY) 1990: October 1, 1989 through September 30, 1990. During FY 1990, the SERI PV program started to implement a new DOE subcontract initiative, entitled the Photovoltaic Manufacturing Technology (PVMaT) Project.'' Excluding (PVMaT) because it was in a start-up phase, in FY 1990 there were 54 subcontracts with a total annualized funding of approximately $11.9 million. Approximately two-thirds of those subcontracts were with universities, at a total funding of over $3.3 million. Cost sharing by industry added another $4.3 million to that $11.9 million of SERI PV subcontracted R D. The six technical sections of this report cover the previously ongoing areas of the subcontracted program: the Amorphous Silicon Research Project, Polycrystalline Thin Films, Crystalline Silicon Materials Research, High-Efficiency Concepts, the New Ideas Program, and the University Participation Program. Technical summaries of each of the subcontracted programs discuss approaches, major accomplishments in FY 1990, and future research directions. Another section introduces the PVMaT project and reports the progress since its inception in FY 1990. Highlights of technology transfer activities are also reported.

  2. Synthesis of the IRSN report on the management activities subcontracted by EDF in currently exploited pressurized water reactors. Opinion related to the management of activities subcontracted by EDF in currently exploited PWRs

    International Nuclear Information System (INIS)

    2015-01-01

    A first document proposes a synthesis of an assessment performed by the IRSN which more particularly addressed how the client (EDF) takes up nuclear safety challenges, and its ability to transmit them to the subcontractor and assess the way he takes them up, how the subcontractor adopts these safety issues and translate them into an adapted technical action, the efficiency of information transmission from the subcontractor to the operator, and the way EDF takes the evolution and increase of activities into account in its subcontracting management strategy on the medium and long terms in relationship with modifications generated by recent measures (additional safety assessments, project of lifetime extension). Another document states the opinion of the permanent group of experts for nuclear reactors on these issues, and outlines some specific aspects (unit outage and maintenance planning, risk analysis, intervention preparation and monitoring, return on experience and improvement of the management of subcontracted activities, evolution and increase of activities). Some recommendations are also stated. A third document is a letter sent by the ASN on the same issues which discusses problems and issues related to subcontracting and has been the basis of the IRSN assessment

  3. Subcontracting in nuclear industry - legal aspects

    International Nuclear Information System (INIS)

    Leger, M.

    2012-01-01

    This article describes the legal framework of subcontracting in France. Subcontracting is considered as a normal mode of functioning for an enterprise: an enterprise contracts another enterprise to do what it can not do itself or does not want to do. According to the 1975 law, cascade subcontracting is allowed but subcontractors have to be accepted by the payer. In some cases the payer can share responsibility when the subcontracting enterprises do not comply to obligations like the payment of some taxes. The main subcontractor who is the one who contracted with the payer is the only one responsible for the right execution of the whole contract. In nuclear industry there are 2 exceptions to the freedom of subcontracting. The first one concerns radiation protection: in a nuclear facility the person in charge of radioprotection must be chosen among the staff. The second concerns the operations and activities that are considered important for radiation protection, it is forbidden to subcontract them. In some cases like maintenance in nuclear sector the law imposes some qualification certification for subcontracting enterprises. The end of the article challenges the common belief about subcontracting in nuclear industry. (A.C.)

  4. 42 CFR 434.6 - General requirements for all contracts and subcontracts.

    Science.gov (United States)

    2010-10-01

    ... appropriate to the service or activity delegated under the subcontract. (c) Continued responsibility of contractor. No subcontract terminates the legal responsibility of the contractor to the agency to assure that...

  5. 46 CFR Sec. 15 - Subcontracts.

    Science.gov (United States)

    2010-10-01

    ... REPAIRS UNDER NATIONAL SHIPPING AUTHORITY MASTER LUMP SUM REPAIR CONTRACT-NSA-LUMPSUMREP Sec. 15 Subcontracts. Under Article 29 of the NSA-LUMPSUMREP Contract, the Contractor is authorized to subcontract... 46 Shipping 8 2010-10-01 2010-10-01 false Subcontracts. Sec. 15 Section 15 Shipping MARITIME...

  6. Photovoltaic Subcontract Program

    Energy Technology Data Exchange (ETDEWEB)

    Surek, Thomas; Catalano, Anthony

    1993-03-01

    This report summarizes the fiscal year (FY) 1992 progress of the subcontracted photovoltaic (PV) research and development (R D) performed under the Photovoltaic Advanced Research and Development Project at the National Renewable Energy Laboratory (NREL)-formerly the Solar Energy Research Institute (SERI). The mission of the national PV program is to develop PV technology for large-scale generation of economically competitive electric power in the United States. The technical sections of the report cover the main areas of the subcontract program: the Crystalline Materials and Advanced Concepts project, the Polycrystalline Thin Films project, Amorphous Silicon Research project, the Photovoltaic Manufacturing Technology (PVMaT) project, PV Module and System Performance and Engineering project, and the PV Analysis and Applications Development project. Technical summaries of each of the subcontracted programs provide a discussion of approaches, major accomplishments in FY 1992, and future research directions.

  7. PWR system reliability improvement activities

    International Nuclear Information System (INIS)

    Yoshikawa, Yuichiro

    1985-01-01

    In Japan lacking in energy resources, it is our basic energy policy to accelerate the development program of nuclear power, thereby reducing our dependence. As referred to in the foregoing, every effort has been exerted on our part to improve the PWR system reliability by dint of the so-called 'HOMEMADE' TQC activities, which is our brain-child as a result of applying to the energy industry the quality control philosophy developed in the field of manufacturing industry

  8. Subcontracting Railway Maintenance

    DEFF Research Database (Denmark)

    Thommesen, Jacob

    2010-01-01

    railway infrastructure manager (InfraMan), whichis subcontracting maintenance tasks to other companies. InfraMan has implemented various central elements in managing their subcontractors. The latter are required to present a safety plan as part of their bid, they must be approved if they are to be awarded...

  9. Services Subcontract Technical Representative (STR) handbook

    International Nuclear Information System (INIS)

    Houston, D.H.

    1997-06-01

    The purpose of this handbook is to provide guidance to Bechtel Hanford, Inc. Subcontract Representatives in their assignments. It is the intention of this handbook to ensure that subcontract work is performed in accordance with the subcontract documents

  10. MEMS Reliability Assurance Activities at JPL

    Science.gov (United States)

    Kayali, S.; Lawton, R.; Stark, B.

    2000-01-01

    An overview of Microelectromechanical Systems (MEMS) reliability assurance and qualification activities at JPL is presented along with the a discussion of characterization of MEMS structures implemented on single crystal silicon, polycrystalline silicon, CMOS, and LIGA processes. Additionally, common failure modes and mechanisms affecting MEMS structures, including radiation effects, are discussed. Common reliability and qualification practices contained in the MEMS Reliability Assurance Guideline are also presented.

  11. Photovoltaic Subcontract Program, FY 1991

    Energy Technology Data Exchange (ETDEWEB)

    1992-03-01

    This report summarizes the fiscal year (FY) 1991 (October 1, 1990, through September 30, 1991) progress of the subcontracted photovoltaic (PV) research and development (R D) performed under the Photovoltaic Advanced Research and Development Project at the National Renewable Energy Laboratory (NREL) -- formerly the Solar Energy Research Institute (SERI). The mission of the national PV program is to develop PV technology for large-scale generation of economically competitive electric power in the United States. The technical sections of the report cover the main areas of the subcontract program: the Amorphous Silicon Research Project, Polycrystalline Thin Films, Crystalline Silicon Materials Research, High-Efficiency Concepts, the New Ideas Program, the University Participation Program, and the Photovoltaic Manufacturing Technology (PVMaT) project. Technical summaries of each of the subcontracted programs provide a discussion of approaches, major accomplishments in FY 1991, and future research directions.

  12. A Model of Safe Subcontracting

    DEFF Research Database (Denmark)

    Thommesen, Jacob; Andersen, Henning Boje

    This report is an excerpt from Deliverable D1.4.1.3 of EU Project iNTeg-Risk. The model presented here is the result of Task 1.4.1 of the iNTeg-Risk project that addressed safety problems related to outsourcing and subcontracting of safety-critical tasks. Concerns have been raised over the effects...... of the fragmentation of work processes associated with subcontracting and outsourcing, where safety may be affected by heterogeneous safety cultures, distributed lines of responsibility, unclear ownership of safety responsibility, and sometimes lack of local knowledge or lack of core skills....

  13. Maps and plans reliability in tourism activities

    Directory of Open Access Journals (Sweden)

    Олександр Донцов

    2016-10-01

    Full Text Available The paper is devoted to creation of an effective system of mapping at all levels of tourist-excursion functioning that will boost the promotion of tourist product in a domestic and foreign tourist market. The State Scientific - Production Enterprise «Kartographia» actively participates in cartographic tourism provision by producing travel pieces, survey, large-scale, route maps, atlases, travel guides, city plans. They produce maps covering different content of the territory of Ukraine, its individual regions, cities interested in tourist excursions. The list and scope of cartographic products has been prepared for publication and released for the last five years. The development of new types of tourism encourages publishers to create various cartographic products for the needs of tourists guaranteeing high accuracy, reliability of information, ease of use. A variety of scientific and practical problems in tourism and excursion activities that are solved using maps and plans makes it difficult to determine the criteria for assessing their reliability. The author proposes to introduce the concept of «relevance» - as maps suitability to solving specific problems. The basis of the peer review is suitability of maps for the objective results release criteria: appropriateness of the target maps tasks (area, theme, destination; accuracy of given parameters (projection, scale, height interval; year according to the shooting of location or mapping; selection methods, methods of results measurement processing algorithm; availability of assistive devices (instrumentation, computer technology, simulation devices. These criteria provide the reliability and accuracy of the result as acceptable to consumers as possible. The author proposes a set of measures aimed at improving the content, quality and reliability of cartographic production.

  14. CMOS Active Pixel Sensor Technology and Reliability Characterization Methodology

    Science.gov (United States)

    Chen, Yuan; Guertin, Steven M.; Pain, Bedabrata; Kayaii, Sammy

    2006-01-01

    This paper describes the technology, design features and reliability characterization methodology of a CMOS Active Pixel Sensor. Both overall chip reliability and pixel reliability are projected for the imagers.

  15. 48 CFR 319.705-5 - Awards involving subcontracting plans.

    Science.gov (United States)

    2010-10-01

    ... SERVICES SOCIOECONOMIC PROGRAMS SMALL BUSINESS PROGRAMS Subcontracting With Small Business, Small Disadvantaged Business, and Women-Owned Small Business Concerns 319.705-5 Awards involving subcontracting plans...

  16. 48 CFR 2019.705-4 - Reviewing the subcontracting plan.

    Science.gov (United States)

    2010-10-01

    ... COMMISSION SOCIOECONOMIC PROGRAMS SMALL BUSINESS PROGRAMS Subcontracting With Small Business, Small Disadvantaged Business, and Women-Owned Small Business Concerns 2019.705-4 Reviewing the subcontracting plan...

  17. Annual report 2014. Report on subcontracting within the AREVA group in France

    International Nuclear Information System (INIS)

    2015-07-01

    This report presents quantitative data and actions undertaken by the AREVA group regarding subcontracting in its nuclear activities in France in 2014. After a presentation of AREVA, it addresses innovative practices in the 'commissioner-supplier' relationship, describes how the subcontracting option corresponds to an industrial choice, describes how subcontracting is supervised through an operational acquisition process, how abilities and training of external interveners are controlled, how operations performed by external interveners are prepared and accompanied. It outlines how issues related to health, safety and security are addressed exactly the same way for all interveners, and finally comments how observations made by the different stakeholders are sources of progress

  18. 78 FR 59798 - Small Business Subcontracting: Correction

    Science.gov (United States)

    2013-09-30

    ... SMALL BUSINESS ADMINISTRATION 13 CFR Part 125 RIN 3245-AG22 Small Business Subcontracting: Correction AGENCY: U.S. Small Business Administration. ACTION: Correcting amendments. SUMMARY: This document... business subcontracting to implement provisions of the Small Business Jobs Act of 2010. This correction...

  19. 76 FR 61626 - Small Business Subcontracting

    Science.gov (United States)

    2011-10-05

    ... SMALL BUSINESS ADMINISTRATION 13 CFR Parts 121 and 125 RIN 3245-AG22 Small Business Subcontracting AGENCY: U.S. Small Business Administration. ACTION: Proposed rule. SUMMARY: The U.S. Small Business... Business Jobs Act of 2010, which pertain to small business subcontracting. SBA is proposing to amend its...

  20. Annual Report: Photovoltaic Subcontract Program FY 1990

    Energy Technology Data Exchange (ETDEWEB)

    Summers, K. A. [Solar Energy Research Inst., Golden, CO (United States)

    1991-03-01

    This report summarizes the progress of the Photovoltaic (PV) Subcontract Program of the Solar Energy Research Institute (SERI) from October 1, 1989 through September 30, 1990. The PV Subcontract Program is responsible for managing the subcontracted portion of SERI's PV Advanced Research and Development Project. In fiscal year 1990, this included more than 54 subcontracts with a total annualized funding of approximately $11.9 million. Approximately two-thirds of the subcontracts were with universities at a total funding of nearly $3.3 million. The six technical sections of the report cover the main areas of the subcontract program: the Amorphous Silicon Research Project, Polycrystalline Thin Films, Crystalline Silicon Materials Research, High-Efficiency Concepts, the New Ideas Program, and the University Participation Program. Technical summaries of each of the subcontracted programs provide a discussion of approaches, major accomplishments in FY 1990, and future research directions. Another section introduces the PVMaT project and reports on its progress.

  1. Small Business Subcontracting Report Validation Can Be Improved

    National Research Council Canada - National Science Library

    Bond, Christopher

    2001-01-01

    ..., and evaluating accounting systems as well as management support of the subcontracting program. These assessments have found that most contractors that were reviewed are making good faith efforts to comply with their subcontracting plans...

  2. 48 CFR 219.704 - Subcontracting plan requirements.

    Science.gov (United States)

    2010-10-01

    ... business firms specifically identified in the subcontracting plan. Notifications shall be in writing and... SYSTEM, DEPARTMENT OF DEFENSE SOCIOECONOMIC PROGRAMS SMALL BUSINESS PROGRAMS The Small Business... business concerns shall include subcontracts with historically black colleges and universities and minority...

  3. FIDIC Conditions of Subcontract as a Model for General Conditions of Subcontract in Pakistan

    Directory of Open Access Journals (Sweden)

    Muhammad Umer Zubair

    2016-12-01

    Full Text Available Fair allocation of risks in conditions of contract is pivotal for coordination, unhindered execution, dispute resolution and maintenance of positive relationship among the parties executing the contract. Pakistani construction industry despite subcontracting a large percentage of construction projects lacks standard conditions of subcontract and they are primarily based on the will of the prime contractor that is onerous for the subcontractor. Therefore in order to develop a model for the general conditions of subcontract in Pakistan the conditions proposed by Associated General Contractors of California, FIDIC in 1994 and 2011, Construction Industry Development Board Malaysia, American Institute of Architects and by the Government of Hong Kong were compared to determine the similarities and differences among them. Afterwards a questionnaire based on the significant provisions of these subcontracts was conducted in the construction industry of Pakistan to determine the appropriate conditions for model subcontract. The results of the survey were further subjected to discussions with the legal experts. Out of 35 suggestions made for the general conditions of subcontract 23 originated from FIDIC in which 20 are recommended by its 2011’s version. It can therefore be implemented in Pakistan with certain amendments and additions as proposed in light of conditions of other subcontracts and the results of the survey and discussions with legal experts.

  4. 48 CFR 1052.219-71 - Subcontracting Plan.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Subcontracting Plan. 1052... Subcontracting Plan. As prescribed in DTAR 1019.708-70(b), insert the following provision: Subcontracting Plan (MAR 2002) As part of its initial proposal, each large business offeror must submit a contracting plan...

  5. 48 CFR 1852.219-73 - Small business subcontracting plan.

    Science.gov (United States)

    2010-10-01

    ... Provisions and Clauses 1852.219-73 Small business subcontracting plan. As prescribed in 1819.708-70(a), insert the following provision: Small Business Subcontracting Plan (MAY 1999) (a) This provision is not... contain FAR clause 52.219-9, “Small Business Subcontracting Plan.” The apparent low bidder must submit the...

  6. Photovoltaic Subcontract Program. Annual report, FY 1992

    Energy Technology Data Exchange (ETDEWEB)

    1993-03-01

    This report summarizes the fiscal year (FY) 1992 progress of the subcontracted photovoltaic (PV) research and development (R&D) performed under the Photovoltaic Advanced Research and Development Project at the National Renewable Energy Laboratory (NREL)-formerly the Solar Energy Research Institute (SERI). The mission of the national PV program is to develop PV technology for large-scale generation of economically competitive electric power in the United States. The technical sections of the report cover the main areas of the subcontract program: the Crystalline Materials and Advanced Concepts project, the Polycrystalline Thin Films project, Amorphous Silicon Research project, the Photovoltaic Manufacturing Technology (PVMaT) project, PV Module and System Performance and Engineering project, and the PV Analysis and Applications Development project. Technical summaries of each of the subcontracted programs provide a discussion of approaches, major accomplishments in FY 1992, and future research directions.

  7. Annual Report: Photovoltaic Subcontract Program FY 1991

    Energy Technology Data Exchange (ETDEWEB)

    Summers, K. A. [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    1992-03-01

    This report summarizes the fiscal year (FY) 1991 (October 1, 1990, through September 30, 1991) progress of the subcontracted photovoltaic (PV) research and development (R&D) performed under the Photovoltaic Advanced Research and Development Project at the National Renewable Energy Laboratory (NREL)-formerly the Solar Energy Research Institute (SERI). The mission of the national PV program is to develop PV technology for large-scale generation of economically competitive electric power in the United States. The technical sections of the report cover the main areas of the subcontract program: the Amorphous Silicon Research Project, Polycrystalline Thin Films, Crystalline Silicon Materials Research, High Efficiency Concepts, the New Ideas Program, the University Participation Program, and the Photovoltaic Manufacturing Technology (PVMaT) project. Technical summaries of each of the subcontracted programs provide a discussion of approaches, major accomplishments in FY 1991, and future research directions.

  8. Windowed active sampling for reliable neural learning

    NARCIS (Netherlands)

    Barakova, E.I; Spaanenburg, L

    The composition of the example set has a major impact on the quality of neural learning. The popular approach is focused on extensive pre-processing to bridge the representation gap between process measurement and neural presentation. In contrast, windowed active sampling attempts to solve these

  9. Reliability

    OpenAIRE

    Condon, David; Revelle, William

    2017-01-01

    Separating the signal in a test from the irrelevant noise is a challenge for all measurement. Low test reliability limits test validity, attenuates important relationships, and can lead to regression artifacts. Multiple approaches to the assessment and improvement of reliability are discussed. The advantages and disadvantages of several different approaches to reliability are considered. Practical advice on how to assess reliability using open source software is provided.

  10. Reliability and validity of ten consumer activity trackers

    NARCIS (Netherlands)

    Kooiman, Thea; Dontje, Manon L.; Sprenger, Siska; Krijnen, Wim; van der Schans, Cees; de Groot, Martijn

    2015-01-01

    Background: Activity trackers can potentially stimulate users to increase their physical activity behavior. The aim of this study was to examine the reliability and validity of ten consumer activity trackers for measuring step count in both laboratory and free-living conditions. Method: Healthy

  11. 29 CFR 4.114 - Subcontracts.

    Science.gov (United States)

    2010-07-01

    ... Secretary of Labor LABOR STANDARDS FOR FEDERAL SERVICE CONTRACTS Application of the McNamara-O'Hara Service Contract Act Covered Contracts Generally § 4.114 Subcontracts. (a) “Contractor” as including “subcontractor... contractor undertakes a contract subject to the Act, the contractor agrees to assume the obligation that the...

  12. R&D cooperation versus R&D subcontracting: empirical evidence from French survey data.

    OpenAIRE

    Estelle Dhont-Peltrault; Etienne Pfister

    2007-01-01

    This paper uses a survey of French firms active in R&D to identify the determinants of R&D outsourcing and of the ensuing trade-off between R&D subcontracting and R&D cooperation. Internal R&D expenditures increase both the probability of outsourcing and the number of R&D partners. Investment in fundamental R&D, group belonging, and the sector’s high R&D intensity positively influences the probability of R&D outsourcing but have less impact on the number of partners. R&D subcontracting is mor...

  13. Final Report for Subcontract B539681

    International Nuclear Information System (INIS)

    McLean, H.

    2009-01-01

    This report summarizes the work performed under subcontract B539681. The scope of work described in the subcontract encompasses studies of fundamental research for fast ignition. The work statement from the from the original subcontract and the subsequent extension can be summarized in three major components: modeling of electron transport in experimental targets, development of diagnostics, and experimental implementation and analysis. All three of these areas have been addressed during the subcontract period, although the tasks detailed in the original subcontract were adapted to research conditions with guidance from the technical contact. The work performed in each of these areas is described. (1) Modeling of electron transport in experimental targets - Electron transport and x-ray generation in experimental targets were modeled with the Monte Carlo code Integrated Tiger Series 3.0 (ITS 3.0). This code package was also used to model the response of Bremsstrahlung spectrometer described in the paper. The modeling helped with target and spectrometer designs and was also used to interpret the measured data from the experiments. this work is coupled to the diagnostic development and experimental analysis and is described in the deliverable of the report. (2) Diagnostic Development - During the subcontract period a filter-stack Bremsstrahlung spectrometer using image plate dosimeters was developed, tested, and calibrated. The spectrometer design and sample data taken with the spectrometer was presented at the High Temperature Plasma Diagnostics conference (Albuquerque, NM 2008). The information was also subsequently published in the peer-reviewed conference proceedings (rev. Sci. Instrum. 79:10E305 (2008)). The diagnostic was fielded on over 10 experiments at the Jupiter Laser Facility at Lawrence Livermore and was also adapted for use on OMEGA EP, was discussed in the subcontract extension. A composition study of the image plate dosimeters was also disseminated as

  14. The Creation of a Permanent Establishment Through the Use of Subcontracting

    DEFF Research Database (Denmark)

    Schmidt, Peter Koerver

    2018-01-01

    In a recent Danish decision, the National Tax Board found that a foreign company should be considered to have a permanent establishment in Denmark, despite the fact that the foreign company had subcontracted all its activities in Denmark to an independent third party. This contribution critically...

  15. [The reliability of a questionnaire regarding Colombian children's physical activity].

    Science.gov (United States)

    Herazo-Beltrán, Aliz Y; Domínguez-Anaya, Regina

    2012-10-01

    Reporting the Physical Activity Questionnaire for school children's (PAQ-C) test-retest reliability and internal consistency. This was a descriptive study of 100 school-aged children aged 9 to 11 years old attending a school in Cartagena, Colombia. The sample was randomly selected. The PAQ-C was given twice, one week apart, after the informed consent forms had been signing by the children's parents and school officials. Cronbach's alpha coefficient of reliability was used for assessing internal consistency and an intra-class correlation coefficient for test-retest reliability SPSS (version 17.0) was used for statistical analysis. The questionnaire scored 0.73 internal consistencies during the first measurement and 0.78 on the second; intra-class correlation coefficient was 0.60. There were differences between boys and girls regarding both measurements. The PAQ-C had acceptable internal consistency and test-retest reliability, thereby making it useful for measuring children's self-reported physical activity and a valuable tool for population studies in Colombia.

  16. 48 CFR 49.606 - Granting subcontract settlement authorization.

    Science.gov (United States)

    2010-10-01

    ...-furnished material or articles completed but undelivered under the subcontract or purchase order, as these... articles may be disposed of without Government approval or screening if the total amount (at subcontract... retention or other disposal of termination inventory allocated to the settlement proposal. (ii) Deduct...

  17. Sub-Contracting in Rural Areas of Thailand

    OpenAIRE

    Mead, Donald C.

    1982-01-01

    This paper describes an arrangement where a producer undertakes certain steps in the production process done by individuals working in their own homes in Thailand. The paper also provides a description of how this system operates in four different industries, presents survey data on people engaged in subcontracting work, evaluates the subcontracting system, and determines the advantages and disadvantages of its operation.

  18. 48 CFR 35.009 - Subcontracting research and development effort.

    Science.gov (United States)

    2010-10-01

    ... ACQUISITION REGULATION SPECIAL CATEGORIES OF CONTRACTING RESEARCH AND DEVELOPMENT CONTRACTING 35.009 Subcontracting research and development effort. Since the selection of R&D contractors is substantially based on... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Subcontracting research...

  19. 48 CFR 15.404-3 - Subcontract pricing considerations.

    Science.gov (United States)

    2010-10-01

    ... CONTRACTING METHODS AND CONTRACT TYPES CONTRACTING BY NEGOTIATION Contract Pricing 15.404-3 Subcontract pricing considerations. (a) The contracting officer is responsible for the determination of a fair and... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Subcontract pricing...

  20. 48 CFR 52.219-9 - Small business subcontracting plan.

    Science.gov (United States)

    2010-10-01

    ... Clauses 52.219-9 Small business subcontracting plan. As prescribed in 19.708(b), insert the following clause: Small Business Subcontracting Plan (OCT 2010) (a) This clause does not apply to small business... business, and women-owned small business concerns. If the offeror is submitting an individual contract plan...

  1. Reliability and validity of the Mywellness Key physical activity monitor

    Directory of Open Access Journals (Sweden)

    Sieverdes JC

    2013-01-01

    Full Text Available John C Sieverdes,1 Eric E Wickel,2 Gregory A Hand,3 Marco Bergamin,4 Robert R Moran,5 Steven N Blair3,51Medical University of South Carolina, College of Nursing and Medicine, Charleson, SC, 2University of Tulsa, Exercise and Sport Science, Tulsa, OK, 3University of South Carolina, Department of Exercise Science, Division of Health Aspects of Physical Activity, Arnold School of Public Health, Columbia, SC, USA; 4University of Padova, Department of Medicine, Sports Medicine Division, Padova, Italy; 5University of South Carolina, Department of Epidemiology and Biostatistics, Arnold School of Public Health, Columbia, SC, USABackground: This study evaluated the reliability and criterion validity of the Mywellness Key accelerometer (MWK using treadmill protocols and indirect calorimetry.Methods: Twenty-five participants completed two four-stage 20-minute treadmill protocols while wearing two MWK accelerometers. Reliability was assessed using raw counts. Validity was assessed by comparing the estimated VO2 calculated from the MWK with values from respiratory gas exchange.Results: Good overall and point estimates of reliability were found for the MWK (all intraclass correlations > 0.93. Generalizability theory coefficients showed lower values for running speed (0.70 versus walking speed (all > 0.84, with the majority of the overall percentage of variability derived from the participant (68%–88% of the total 100%. Acceptable validity was found overall (Pearson’s r = 0.895–0.902, P < 0.0001, with an overall mean absolute error of 16.22% and a coefficient of variance of 16.92%. Bland-Altman plots showed an overestimation of energy expenditure during the running speed, but total kilocalories were underestimated during the protocol by approximately 10%.Conclusion: Good validity was found during light and moderate walking, while running was slightly overestimated. The MWK may be useful for clinicians and researchers interested in promotion or assessment

  2. Reliability and validity of the transport and physical activity questionnaire (TPAQ) for assessing physical activity behaviour.

    Science.gov (United States)

    Adams, Emma J; Goad, Mary; Sahlqvist, Shannon; Bull, Fiona C; Cooper, Ashley R; Ogilvie, David

    2014-01-01

    No current validated survey instrument allows a comprehensive assessment of both physical activity and travel behaviours for use in interdisciplinary research on walking and cycling. This study reports on the test-retest reliability and validity of physical activity measures in the transport and physical activity questionnaire (TPAQ). The TPAQ assesses time spent in different domains of physical activity and using different modes of transport for five journey purposes. Test-retest reliability of eight physical activity summary variables was assessed using intra-class correlation coefficients (ICC) and Kappa scores for continuous and categorical variables respectively. In a separate study, the validity of three survey-reported physical activity summary variables was assessed by computing Spearman correlation coefficients using accelerometer-derived reference measures. The Bland-Altman technique was used to determine the absolute validity of survey-reported time spent in moderate-to-vigorous physical activity (MVPA). In the reliability study, ICC for time spent in different domains of physical activity ranged from fair to substantial for walking for transport (ICC = 0.59), cycling for transport (ICC = 0.61), walking for recreation (ICC = 0.48), cycling for recreation (ICC = 0.35), moderate leisure-time physical activity (ICC = 0.47), vigorous leisure-time physical activity (ICC = 0.63), and total physical activity (ICC = 0.56). The proportion of participants estimated to meet physical activity guidelines showed acceptable reliability (k = 0.60). In the validity study, comparison of survey-reported and accelerometer-derived time spent in physical activity showed strong agreement for vigorous physical activity (r = 0.72, ptravel behaviours and may be suitable for wider use. Its physical activity summary measures have comparable reliability and validity to those of similar existing questionnaires.

  3. Photovoltaic Reliability Group activities in USA and Brazil (Presentation Recording)

    Science.gov (United States)

    Dhere, Neelkanth G.; Cruz, Leila R. O.

    2015-09-01

    Recently prices of photovoltaic (PV) systems have been reduced considerably and may continue to be reduced making them attractive. If these systems provide electricity over the stipulated warranty period, it would be possible attain socket parity within the next few years. Current photovoltaic module qualifications tests help in minimizing infant mortality but do not guarantee useful lifetime over the warranty period. The PV Module Quality Assurance Task Force (PVQAT) is trying to formulate accelerated tests that will be useful towards achieving the ultimate goal of assuring useful lifetime over the warranty period as well as to assure manufacturing quality. Unfortunately, assuring the manufacturing quality may require 24/7 presence. Alternatively, collecting data on the performance of fielded systems would assist in assuring manufacturing quality. Here PV systems installed by home-owners and small businesses can constitute as an important untapped source of data. The volunteer group, PV - Reliable, Safe and Sustainable Quality! (PVRessQ!) is providing valuable service to small PV system owners. Photovoltaic Reliability Group (PVRG) is initiating activities in USA and Brazil to assist home owners and small businesses in monitoring photovoltaic (PV) module performance and enforcing warranty. It will work in collaboration with small PV system owners, consumer protection agencies. Brazil is endowed with excellent solar irradiance making it attractive for installation of PV systems. Participating owners of small PV systems would instruct inverter manufacturers to copy the daily e-mails to PVRG and as necessary, will authorize the PVRG to carry out review of PV systems. The presentation will consist of overall activities of PVRG in USA and Brazil.

  4. The nexus between OSH and subcontracting.

    Science.gov (United States)

    Nunes, Isabel L

    2012-01-01

    Subcontracting of specialized functions to external companies (e.g. cleaning or maintenance) is actually very common within several industries. These external companies' are called contractors and their contracting is often designated as outsourcing. Frequently contractors involve other companies (the sub-contractors) to assist them in fulfilling the contract, resulting in a complex chain of organizations focused on interchange of work - the contracting chain. Therefore in the same work site can coexist workers form the client-company and workers from the contractors and/or subcontractors. Since contractors perform their job in client's facilities, they can be exposed to hazards that are unknown to them. On other hand, workers of the client company can also be exposed to hazardous situations derived from the work performed by the contractors. The paper discusses how adequate occupational safety and health conditions can be assured when dealing with this kind of dynamic labor networks. Two case-studies and several examples coming from international literature will be presented.

  5. Reliability and validity of the transport and physical activity questionnaire (TPAQ for assessing physical activity behaviour.

    Directory of Open Access Journals (Sweden)

    Emma J Adams

    Full Text Available No current validated survey instrument allows a comprehensive assessment of both physical activity and travel behaviours for use in interdisciplinary research on walking and cycling. This study reports on the test-retest reliability and validity of physical activity measures in the transport and physical activity questionnaire (TPAQ.The TPAQ assesses time spent in different domains of physical activity and using different modes of transport for five journey purposes. Test-retest reliability of eight physical activity summary variables was assessed using intra-class correlation coefficients (ICC and Kappa scores for continuous and categorical variables respectively. In a separate study, the validity of three survey-reported physical activity summary variables was assessed by computing Spearman correlation coefficients using accelerometer-derived reference measures. The Bland-Altman technique was used to determine the absolute validity of survey-reported time spent in moderate-to-vigorous physical activity (MVPA.In the reliability study, ICC for time spent in different domains of physical activity ranged from fair to substantial for walking for transport (ICC = 0.59, cycling for transport (ICC = 0.61, walking for recreation (ICC = 0.48, cycling for recreation (ICC = 0.35, moderate leisure-time physical activity (ICC = 0.47, vigorous leisure-time physical activity (ICC = 0.63, and total physical activity (ICC = 0.56. The proportion of participants estimated to meet physical activity guidelines showed acceptable reliability (k = 0.60. In the validity study, comparison of survey-reported and accelerometer-derived time spent in physical activity showed strong agreement for vigorous physical activity (r = 0.72, p<0.001, fair but non-significant agreement for moderate physical activity (r = 0.24, p = 0.09 and fair agreement for MVPA (r = 0.27, p = 0.05. Bland-Altman analysis showed a mean

  6. Reliability and Validity of the Transport and Physical Activity Questionnaire (TPAQ) for Assessing Physical Activity Behaviour

    Science.gov (United States)

    Adams, Emma J.; Goad, Mary; Sahlqvist, Shannon; Bull, Fiona C.; Cooper, Ashley R.; Ogilvie, David

    2014-01-01

    Background No current validated survey instrument allows a comprehensive assessment of both physical activity and travel behaviours for use in interdisciplinary research on walking and cycling. This study reports on the test-retest reliability and validity of physical activity measures in the transport and physical activity questionnaire (TPAQ). Methods The TPAQ assesses time spent in different domains of physical activity and using different modes of transport for five journey purposes. Test-retest reliability of eight physical activity summary variables was assessed using intra-class correlation coefficients (ICC) and Kappa scores for continuous and categorical variables respectively. In a separate study, the validity of three survey-reported physical activity summary variables was assessed by computing Spearman correlation coefficients using accelerometer-derived reference measures. The Bland-Altman technique was used to determine the absolute validity of survey-reported time spent in moderate-to-vigorous physical activity (MVPA). Results In the reliability study, ICC for time spent in different domains of physical activity ranged from fair to substantial for walking for transport (ICC = 0.59), cycling for transport (ICC = 0.61), walking for recreation (ICC = 0.48), cycling for recreation (ICC = 0.35), moderate leisure-time physical activity (ICC = 0.47), vigorous leisure-time physical activity (ICC = 0.63), and total physical activity (ICC = 0.56). The proportion of participants estimated to meet physical activity guidelines showed acceptable reliability (k = 0.60). In the validity study, comparison of survey-reported and accelerometer-derived time spent in physical activity showed strong agreement for vigorous physical activity (r = 0.72, pphysical activity (r = 0.24, p = 0.09) and fair agreement for MVPA (r = 0.27, p = 0.05). Bland-Altman analysis showed a mean overestimation of MVPA of 87.6 min/week (p

  7. Companies Participating in the Department of Defense Subcontracting Program: First Half Fiscal Year 1997

    National Research Council Canada - National Science Library

    1997-01-01

    ...). Public Law (P.L.) 95-507, as amended requires that these contractors establish a small business subcontracting program and report to DoD semiannually, using standard 295, on subcontract awards. As required by P.I...

  8. 25 CFR 900.49 - What procurement standards apply to subcontracts?

    Science.gov (United States)

    2010-04-01

    ... ASSISTANCE ACT Standards for Tribal or Tribal Organization Management Systems Procurement Management System Standards § 900.49 What procurement standards apply to subcontracts? Each subcontract entered into under the... 25 Indians 2 2010-04-01 2010-04-01 false What procurement standards apply to subcontracts? 900.49...

  9. 48 CFR 552.219-72 - Preparation, Submission, and Negotiation of Subcontracting Plans.

    Science.gov (United States)

    2010-10-01

    ..., and Negotiation of Subcontracting Plans. 552.219-72 Section 552.219-72 Federal Acquisition Regulations... Text of Provisions and Clauses 552.219-72 Preparation, Submission, and Negotiation of Subcontracting... Negotiation of Subcontracting Plans (JUN 2005) (a) An offeror, other than a small business concern, submitting...

  10. 48 CFR 2452.219-70 - Small business subcontracting plan compliance.

    Science.gov (United States)

    2010-10-01

    ... of Provisions and Clauses 2452.219-70 Small business subcontracting plan compliance. As prescribed in 2419.708(d), insert the following provision: Small Business Subcontracting Plan Compliance (FEB 2006... the clause at FAR 52.219-9, Small Business Subcontracting Plan. (c) The government will consider...

  11. Subcontract 8699K0013-9Q. Final progress report, July 19, 1993--July 18, 1996

    International Nuclear Information System (INIS)

    Humphries, S. Jr.

    1996-01-01

    A major activity in the subcontract was to provide theoretical and analytical support for experimental activities at Los Alamos National Laboratory. Reflecting changes in the laboratory organization, work was performed initially for Group P-14 and latter for the Agex Program Office. A second task was to develop, to supply and to support software in the areas of hydrodynamics, magnetohydrodynamics and electromagnetics. The programs are compatible with personal computers and allow simulations of experiments by laboratory personnel both on-site and in the field

  12. Forecast of contracting and subcontracting opportunities: Fiscal year 1998

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-01-01

    This report describes procurement procedures and opportunities for small businesses with the Department of Energy (DOE). It describes both prime and subcontracting opportunities of $100,000 and above which are being set aside for 8(a) and other small business concerns. The report contains sections on: SIC codes; procurement opportunities with headquarters offices; procurement opportunities with field offices; subcontracting opportunities with major contractors; 8(a) contracts expiring in FY 1998; other opportunities to do business with DOE; management and operating contractors--expiration dates; Office of Small and Disadvantaged Business Utilization (OSDBU) staff directory; and small business survey. This document will be updated quarterly on the home page.

  13. reliability reliability

    African Journals Online (AJOL)

    eobe

    Corresponding author, Tel: +234-703. RELIABILITY .... V , , given by the code of practice. However, checks must .... an optimization procedure over the failure domain F corresponding .... of Concrete Members based on Utility Theory,. Technical ...

  14. 48 CFR 52.222-11 - Subcontracts (Labor Standards).

    Science.gov (United States)

    2010-10-01

    ...: Subcontracts (Labor Standards) (JUL 2005) (a) Definition. Construction, alteration or repair, as used in this... dedicated to the construction of the building or work and is deemed part of the site of the work within the meaning of paragraph (2) of the “site of work” definition; and (5) Transportation of portions of the...

  15. 48 CFR 52.244-6 - Subcontracts for Commercial Items.

    Science.gov (United States)

    2010-10-01

    ... clauses in subcontracts for commercial items: (i) 52.203-13, Contractor Code of Business Ethics and.... (e) To the maximum extent practicable, when the Contractor acts as a purchasing agent for the Government with respect to a purchase that exceeds the simplified acquisition threshold, the Contractor shall...

  16. 77 FR 29983 - Federal Acquisition Regulation; Information Collection; Subcontract Consent

    Science.gov (United States)

    2012-05-21

    ... performance of functions of the Federal Acquisition Regulation (FAR), and whether it will have practical... The objective of consent to subcontract, as discussed in FAR Part 44, is to evaluate the efficiency and effectiveness with which the contractor spends Government funds, and complies with Government...

  17. 48 CFR 5.206 - Notices of subcontracting opportunities.

    Science.gov (United States)

    2010-10-01

    ... subcontracts, to increase participation by qualified HUBZone small business, small, small disadvantaged, women-owned small business, veteran-owned small business and service-disabled veteran-owned small business.... (b) The notices must describe— (1) The business opportunity; (2) Any prequalification requirements...

  18. Reliability and validity of international physical activity questionnaire ...

    African Journals Online (AJOL)

    The International Physical Activity Questionnaire (IPAQ), a standardised method for assessing physical activity, has been tested at 14 centres in 12 countries on adults aged 18 to 65 years. However, there is no standardised instrument to determine levels of physical activity amongst Malay-speaking adults in Malaysia.

  19. Test-Retest Reliability of a Survey to Measure Transport-Related Physical Activity in Adults

    Science.gov (United States)

    Badland, Hannah; Schofield, Grant

    2006-01-01

    The present research details test-retest reliability of a newly developed, telephone-administered TPA survey for adults. This instrument examines barriers, perceptions, and current travel behaviors to place of work/study and local convenience shops. Demonstrated test-retest reliability of the Active Friendly Environments-Transport-Related Physical…

  20. Effects of feedback reliability on feedback-related brain activity: A feedback valuation account.

    Science.gov (United States)

    Ernst, Benjamin; Steinhauser, Marco

    2018-04-06

    Adaptive decision making relies on learning from feedback. Because feedback sometimes can be misleading, optimal learning requires that knowledge about the feedback's reliability be utilized to adjust feedback processing. Although previous research has shown that feedback reliability indeed influences feedback processing, the underlying mechanisms through which this is accomplished remain unclear. Here we propose that feedback processing is adjusted by the adaptive, top-down valuation of feedback. We assume that unreliable feedback is devalued relative to reliable feedback, thus reducing the reward prediction errors that underlie feedback-related brain activity and learning. A crucial prediction of this account is that the effects of feedback reliability are susceptible to contrast effects. That is, the effects of feedback reliability should be enhanced when both reliable and unreliable feedback are experienced within the same context, as compared to when only one level of feedback reliability is experienced. To evaluate this prediction, we measured the event-related potentials elicited by feedback in two experiments in which feedback reliability was varied either within or between blocks. We found that the fronto-central valence effect, a correlate of reward prediction errors during reinforcement learning, was reduced for unreliable feedback. But this result was obtained only when feedback reliability was varied within blocks, thus indicating a contrast effect. This suggests that the adaptive valuation of feedback is one mechanism underlying the effects of feedback reliability on feedback processing.

  1. A method to determine validity and reliability of activity sensors

    NARCIS (Netherlands)

    Boerema, Simone Theresa; Hermens, Hermanus J.

    2013-01-01

    METHOD Four sensors were securely fastened to a mechanical oscillator (Vibration Exciter, type 4809, Brüel & Kjær) and moved at various frequencies (6.67Hz; 13.45Hz; 19.88Hz) within the range of human physical activity. For each of the three sensor axes, the sensors were simultaneously moved for

  2. Transferring the Cost of Wage Rigidity to Subcontracting Firms: The Case of Korea

    Directory of Open Access Journals (Sweden)

    Kwangho Woo

    2016-08-01

    Full Text Available We select a Korean case with ample subcontracting practices and a rigid wage system. Workplaces with subcontract transactions would have reason to impute the additional wage incremental costs associated with the seniority-based wage system (Hobong in Korea to subcontractors. Our empirical results identify the cost-transferring mechanism under which the cost of wage rigidity for contractors is transferred to subcontracting firms and aggravates the wage inequality among workers in contracting and subcontracting firms. We analyze the industrial difference in the intensity of this transferring mechanism and probe policy directions considering the improvement of both the subcontracting structure and pay system simultaneously. For the sustainability of firms, they need to reform a seniority-based wage system, an incentive-based wage system or a job-based wage system and the exploited subcontracting structure for creating share value.

  3. 48 CFR 225.872-8 - Subcontracting with qualifying country sources.

    Science.gov (United States)

    2010-10-01

    ... security interest reasons, mobilization base considerations, or applicable U.S. laws or regulations (see... contractor subcontracting procedures, the contracting officer shall ensure that the contract does not...

  4. 48 CFR 2019.705 - Responsibilities of the contracting officer under the subcontracting assistance program.

    Science.gov (United States)

    2010-10-01

    ... Regulations System NUCLEAR REGULATORY COMMISSION SOCIOECONOMIC PROGRAMS SMALL BUSINESS PROGRAMS Subcontracting With Small Business, Small Disadvantaged Business, and Women-Owned Small Business Concerns 2019.705...

  5. 48 CFR 319.705 - Responsibilities of the Contracting Officer under the subcontracting assistance program.

    Science.gov (United States)

    2010-10-01

    ... Regulations System HEALTH AND HUMAN SERVICES SOCIOECONOMIC PROGRAMS SMALL BUSINESS PROGRAMS Subcontracting With Small Business, Small Disadvantaged Business, and Women-Owned Small Business Concerns 319.705...

  6. 48 CFR 3019.705 - Responsibilities for the contracting officer under the subcontracting program.

    Science.gov (United States)

    2010-10-01

    ... Regulations System DEPARTMENT OF HOMELAND SECURITY, HOMELAND SECURITY ACQUISITION REGULATION (HSAR) SOCIOECONOMIC PROGRAMS SMALL BUSINESS PROGRAMS The Small Business Subcontracting Program 3019.705...

  7. Intersession reliability of fMRI activation for heat pain and motor tasks.

    Science.gov (United States)

    Quiton, Raimi L; Keaser, Michael L; Zhuo, Jiachen; Gullapalli, Rao P; Greenspan, Joel D

    2014-01-01

    As the practice of conducting longitudinal fMRI studies to assess mechanisms of pain-reducing interventions becomes more common, there is a great need to assess the test-retest reliability of the pain-related BOLD fMRI signal across repeated sessions. This study quantitatively evaluated the reliability of heat pain-related BOLD fMRI brain responses in healthy volunteers across 3 sessions conducted on separate days using two measures: (1) intraclass correlation coefficients (ICC) calculated based on signal amplitude and (2) spatial overlap. The ICC analysis of pain-related BOLD fMRI responses showed fair-to-moderate intersession reliability in brain areas regarded as part of the cortical pain network. Areas with the highest intersession reliability based on the ICC analysis included the anterior midcingulate cortex, anterior insula, and second somatosensory cortex. Areas with the lowest intersession reliability based on the ICC analysis also showed low spatial reliability; these regions included pregenual anterior cingulate cortex, primary somatosensory cortex, and posterior insula. Thus, this study found regional differences in pain-related BOLD fMRI response reliability, which may provide useful information to guide longitudinal pain studies. A simple motor task (finger-thumb opposition) was performed by the same subjects in the same sessions as the painful heat stimuli were delivered. Intersession reliability of fMRI activation in cortical motor areas was comparable to previously published findings for both spatial overlap and ICC measures, providing support for the validity of the analytical approach used to assess intersession reliability of pain-related fMRI activation. A secondary finding of this study is that the use of standard ICC alone as a measure of reliability may not be sufficient, as the underlying variance structure of an fMRI dataset can result in inappropriately high ICC values; a method to eliminate these false positive results was used in this

  8. Validity and reliability of a physical activity/inactivity questionnaire in ...

    African Journals Online (AJOL)

    Objective. We sought to determine the validity and reliability of a self-report physical activity questionnaire (PAQ) measuring physical activity/inactivity in South African schoolgirls of different ethnic origins. Methods. Construct validity of the PAQ was tested against physical activity energy expenditure estimated from an ...

  9. Reliable activation of immature neurons in the adult hippocampus.

    Directory of Open Access Journals (Sweden)

    Lucas A Mongiat

    Full Text Available Neurons born in the adult dentate gyrus develop, mature, and connect over a long interval that can last from six to eight weeks. It has been proposed that, during this period, developing neurons play a relevant role in hippocampal signal processing owing to their distinctive electrical properties. However, it has remained unknown whether immature neurons can be recruited into a network before synaptic and functional maturity have been achieved. To address this question, we used retroviral expression of green fluorescent protein to identify developing granule cells of the adult mouse hippocampus and investigate the balance of afferent excitation, intrinsic excitability, and firing behavior by patch clamp recordings in acute slices. We found that glutamatergic inputs onto young neurons are significantly weaker than those of mature cells, yet stimulation of cortical excitatory axons elicits a similar spiking probability in neurons at either developmental stage. Young neurons are highly efficient in transducing ionic currents into membrane depolarization due to their high input resistance, which decreases substantially in mature neurons as the inward rectifier potassium (Kir conductance increases. Pharmacological blockade of Kir channels in mature neurons mimics the high excitability characteristic of young neurons. Conversely, Kir overexpression induces mature-like firing properties in young neurons. Therefore, the differences in excitatory drive of young and mature neurons are compensated by changes in membrane excitability that render an equalized firing activity. These observations demonstrate that the adult hippocampus continuously generates a population of highly excitable young neurons capable of information processing.

  10. Reliability-oriented Design of a Cost-effective Active Capacitor

    DEFF Research Database (Denmark)

    Wang, Haoran; Wang, Huai

    2017-01-01

    This paper presents the reliability-oriented design of a two-terminal active capacitor proposed recently. The two-terminal active capacitor has the same level of convenience as a passive capacitor with reduced requirement of overall energy storage. In order to fully explore the potential...... of the proposed concept, a comprehensive design procedure is necessary to optimally sizing the key components of the active capacitor in terms of cost and reliability. Moreover, the inherent condition monitoring capability of the active capacitor is discussed by utilizing the existing feedback signals. A 500 W...

  11. Reliability Evaluation of a Single-phase H-bridge Inverter with Integrated Active Power Decoupling

    DEFF Research Database (Denmark)

    Tang, Junchaojie; Wang, Haoran; Ma, Siyuan

    2016-01-01

    it with the traditional passive DC-link solution. The converter level reliability is obtained by component level electro-thermal stress modeling, lifetime model, Weibull distribution, and Reliability Block Diagram (RBD) method. The results are demonstrated by a 2 kW single-phase inverter application.......Various power decoupling methods have been proposed recently to replace the DC-link Electrolytic Capacitors (E-caps) in single-phase conversion system, in order to extend the lifetime and improve the reliability of the DC-link. However, it is still an open question whether the converter level...... reliability becomes better or not, since additional components are introduced and the loading of the existing components may be changed. This paper aims to study the converter level reliability of a single-phase full-bridge inverter with two kinds of active power decoupling module and to compare...

  12. Reliability and validity of the modifiable activity questionnaire for an Iranian urban adolescent population

    Directory of Open Access Journals (Sweden)

    Maryam Delshad

    2015-01-01

    Full Text Available Background: The purpose of this study was to evaluate the validity and reliability on the Persian translation of the Modifiable Activity Questionnaire (MAQ in a sample of Tehranian adolescents. Methods: Of a total of 52 subjects, a sub-sample of 40 participations (55.0% boys was used to assess the reliability and the validity of the physical activity questionnaire. The reliability of the two MAQs was calculated by intraclass correlation coefficients, and validation was evaluated using Pearson correlation coefficients to compare data between mean of the two MAQs and mean of four physical activity records. Results: Intraclass correlation coefficient was calculated to assess the reliability between two MAQs and the results of leisure time physical activity over the past year were 0.97. Pearson correlation coefficients between mean of two MAQs and mean of four physical activity records were 0.49 (P < 0.001, for leisure time physical activities. Conclusions: High reliability and relatively moderate validity were found for the Persian translation of the MAQ in a Tehranian adolescent population. Further studies with large sample size are suggested to assess the validity more precisely.

  13. The National Centre of Systems Reliability and some aspects of its future activities

    International Nuclear Information System (INIS)

    Bourne, A.J.

    1975-01-01

    The National Centre of Systems Reliability (NCSR) has been set up to enhance the work of the Systems Reliability Service (SRS), which during its four years of operation by the UKAEA has offered to industry expertise in the quantification of reliability of systems in various technological applications. An outline is presented of the background to the establishment of the NCSR, including a brief summary of the work of the SRS. Certain aspects of the future activities of the NCSR particularly in relation to research and collaboration with universities are discussed. (U.K.)

  14. EVALUATION OF HUMAN RELIABILITY IN SELECTED ACTIVITIES IN THE RAILWAY INDUSTRY

    Directory of Open Access Journals (Sweden)

    Erika SUJOVÁ

    2016-07-01

    Full Text Available The article focuses on evaluation of human reliability in the human – machine system in the railway industry. Based on a survey of a train dispatcher and of selected activities, we have identified risk factors affecting the dispatcher‘s work and the evaluated risk level of their influence on the reliability and safety of preformed activities. The research took place at the authors‘ work place between 2012-2013. A survey method was used. With its help, authors were able to identify selected work activities of train dispatcher’s risk factors that affect his/her work and the evaluated seriousness of its in-fluence on the reliability and safety of performed activities. Amongst the most important finding fall expressions of un-clear and complicated internal regulations and work processes, a feeling of being overworked, fear for one’s safety at small, insufficiently protected stations.

  15. Reliability and Validity of an Internet-based Questionnaire Measuring Lifetime Physical Activity

    OpenAIRE

    De Vera, Mary A.; Ratzlaff, Charles; Doerfling, Paul; Kopec, Jacek

    2010-01-01

    Lifetime exposure to physical activity is an important construct for evaluating associations between physical activity and disease outcomes, given the long induction periods in many chronic diseases. The authors' objective in this study was to evaluate the measurement properties of the Lifetime Physical Activity Questionnaire (L-PAQ), a novel Internet-based, self-administered instrument measuring lifetime physical activity, among Canadian men and women in 2005–2006. Reliability was examined u...

  16. Reliability and Validity of Ten Consumer Activity Trackers Depend on Walking Speed

    NARCIS (Netherlands)

    Fokkema, Tryntsje; Kooiman, Thea J. M.; Krijnen, Wim P.; Van der Schans, Cees P.; De Groot, Martijn

    Purpose: To examine the test-retest reliability and validity of ten activity trackers for step counting at three different walking speeds. Methods: Thirty-one healthy participants walked twice on a treadmill for 30 min while wearing 10 activity trackers (Polar Loop, Garmin Vivosmart, Fitbit Charge

  17. Reliability and validity of ten consumer activity trackers depend on walking speed

    NARCIS (Netherlands)

    Fokkema, Tryntsje; Kooiman, Thea; Krijnen, Wim; van der Schans, Cees; de Groot, Martijn

    Purpose: To examine the test–retest reliability and validity of ten activity trackers for step counting at three different walking speeds. Methods: Thirty-one healthy participants walked twice on a treadmill for 30 min while wearing 10 activity trackers (Polar Loop, Garmin Vivosmart, Fitbit Charge

  18. Reliability and Validity of the PAQ-C Questionnaire to Assess Physical Activity in Children

    Science.gov (United States)

    Benítez-Porres, Javier; López-Fernández, Iván; Raya, Juan Francisco; Álvarez Carnero, Sabrina; Alvero-Cruz, José Ramón; Álvarez Carnero, Elvis

    2016-01-01

    Background: Physical activity (PA) assessment by questionnaire is a cornerstone in the field of sport epidemiology studies. The Physical Activity Questionnaire for Children (PAQ-C) has been used widely to assess PA in healthy school populations. The aim of this study was to evaluate the reliability and validity of the PAQ-C questionnaire in…

  19. A systematic review of reliability and objective criterion-related validity of physical activity questionnaires

    NARCIS (Netherlands)

    Helmerhorst, Hendrik J. F.; Brage, Søren; Warren, Janet; Besson, Herve; Ekelund, Ulf

    2012-01-01

    Physical inactivity is one of the four leading risk factors for global mortality. Accurate measurement of physical activity (PA) and in particular by physical activity questionnaires (PAQs) remains a challenge. The aim of this paper is to provide an updated systematic review of the reliability and

  20. 48 CFR 852.219-9 - VA Small business subcontracting plan minimum requirements.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false VA Small business... Provisions and Clauses 852.219-9 VA Small business subcontracting plan minimum requirements. As prescribed in subpart 819.709, insert the following clause: VA Small Business Subcontracting Plan Minimum Requirements...

  1. 13 CFR 126.701 - Can these subcontracting percentages requirements change?

    Science.gov (United States)

    2010-01-01

    ... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false Can these subcontracting percentages requirements change? 126.701 Section 126.701 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION HUBZONE PROGRAM Contract Performance Requirements § 126.701 Can these subcontracting percentages...

  2. Tri-State Synfuels Project Review: Volume 9A. Subcontract information. [Proposed Henderson, Kentucky coal to gasoline plant; water supply and civil engineering subcontracts

    Energy Technology Data Exchange (ETDEWEB)

    1982-06-01

    Volume 9A considers subcontract work done at the site involving hydrogeological studies with respect to water supply and geotechnical work with respect to the building foundations necessary based on boreholes drilled and the lithology of the area. (LTN)

  3. Reliability and validity of a nutrition and physical activity environmental self-assessment for child care

    Directory of Open Access Journals (Sweden)

    Ammerman Alice S

    2007-07-01

    Full Text Available Abstract Background Few assessment instruments have examined the nutrition and physical activity environments in child care, and none are self-administered. Given the emerging focus on child care settings as a target for intervention, a valid and reliable measure of the nutrition and physical activity environment is needed. Methods To measure inter-rater reliability, 59 child care center directors and 109 staff completed the self-assessment concurrently, but independently. Three weeks later, a repeat self-assessment was completed by a sub-sample of 38 directors to assess test-retest reliability. To assess criterion validity, a researcher-administered environmental assessment was conducted at 69 centers and was compared to a self-assessment completed by the director. A weighted kappa test statistic and percent agreement were calculated to assess agreement for each question on the self-assessment. Results For inter-rater reliability, kappa statistics ranged from 0.20 to 1.00 across all questions. Test-retest reliability of the self-assessment yielded kappa statistics that ranged from 0.07 to 1.00. The inter-quartile kappa statistic ranges for inter-rater and test-retest reliability were 0.45 to 0.63 and 0.27 to 0.45, respectively. When percent agreement was calculated, questions ranged from 52.6% to 100% for inter-rater reliability and 34.3% to 100% for test-retest reliability. Kappa statistics for validity ranged from -0.01 to 0.79, with an inter-quartile range of 0.08 to 0.34. Percent agreement for validity ranged from 12.9% to 93.7%. Conclusion This study provides estimates of criterion validity, inter-rater reliability and test-retest reliability for an environmental nutrition and physical activity self-assessment instrument for child care. Results indicate that the self-assessment is a stable and reasonably accurate instrument for use with child care interventions. We therefore recommend the Nutrition and Physical Activity Self-Assessment for

  4. Reliability Assessment of Active Distribution System Using Monte Carlo Simulation Method

    Directory of Open Access Journals (Sweden)

    Shaoyun Ge

    2014-01-01

    Full Text Available In this paper we have treated the reliability assessment problem of low and high DG penetration level of active distribution system using the Monte Carlo simulation method. The problem is formulated as a two-case program, the program of low penetration simulation and the program of high penetration simulation. The load shedding strategy and the simulation process were introduced in detail during each FMEA process. Results indicate that the integration of DG can improve the reliability of the system if the system was operated actively.

  5. A reliability study on brain activation during active and passive arm movements supported by an MRI-compatible robot.

    Science.gov (United States)

    Estévez, Natalia; Yu, Ningbo; Brügger, Mike; Villiger, Michael; Hepp-Reymond, Marie-Claude; Riener, Robert; Kollias, Spyros

    2014-11-01

    In neurorehabilitation, longitudinal assessment of arm movement related brain function in patients with motor disability is challenging due to variability in task performance. MRI-compatible robots monitor and control task performance, yielding more reliable evaluation of brain function over time. The main goals of the present study were first to define the brain network activated while performing active and passive elbow movements with an MRI-compatible arm robot (MaRIA) in healthy subjects, and second to test the reproducibility of this activation over time. For the fMRI analysis two models were compared. In model 1 movement onset and duration were included, whereas in model 2 force and range of motion were added to the analysis. Reliability of brain activation was tested with several statistical approaches applied on individual and group activation maps and on summary statistics. The activated network included mainly the primary motor cortex, primary and secondary somatosensory cortex, superior and inferior parietal cortex, medial and lateral premotor regions, and subcortical structures. Reliability analyses revealed robust activation for active movements with both fMRI models and all the statistical methods used. Imposed passive movements also elicited mainly robust brain activation for individual and group activation maps, and reliability was improved by including additional force and range of motion using model 2. These findings demonstrate that the use of robotic devices, such as MaRIA, can be useful to reliably assess arm movement related brain activation in longitudinal studies and may contribute in studies evaluating therapies and brain plasticity following injury in the nervous system.

  6. Reliability of the Serbian version of the International Physical Activity Questionnaire for older adults

    Directory of Open Access Journals (Sweden)

    Milanović Z

    2014-04-01

    Full Text Available Zoran Milanović,1 Saša Pantelić,1 Nebojša Trajković,1 Bojan Jorgić,1 Goran Sporiš,2 Milovan Bratić1 1Faculty of Sport and Physical Education, University of Niš, Niš, Serbia; 2Faculty of Kinesiology, University of Zagreb, Zagreb, Croatia Abstract: The purpose of this study was to determine the test–retest reliability of the International Physical Activity Questionnaire (IPAQ for older adults in Serbia. Six hundred and sixty older adults (352 men, 53%; 308 women, 47%; mean age 67.65±5.76 years participated in the study. To examine test–retest reliability, the participants were asked to complete the IPAQ on two occasions 2 weeks apart. Moderate reliability was observed between the repeated IPAQ, with intraclass correlation coefficients ranging from 0.53 to 0.91. The least reliability was established in leisure time activity (0.53 and the most reliability in the transport domain (0.91. Men and women had similar intraclass correlation coefficients for total physical activity (0.71 versus 0.74, respectively, while the biggest difference was obtained for housework in men (0.68 and in women (0.90. Our study shows that the long version of the IPAQ is a reliable instrument for assessing physical activity levels in older adults and that it may be useful for generating internationally comparable data. Keywords: questionnaire, elderly, IPAQ, physical activity

  7. Intersession reliability of fMRI activation for heat pain and motor tasks

    Science.gov (United States)

    Quiton, Raimi L.; Keaser, Michael L.; Zhuo, Jiachen; Gullapalli, Rao P.; Greenspan, Joel D.

    2014-01-01

    As the practice of conducting longitudinal fMRI studies to assess mechanisms of pain-reducing interventions becomes more common, there is a great need to assess the test–retest reliability of the pain-related BOLD fMRI signal across repeated sessions. This study quantitatively evaluated the reliability of heat pain-related BOLD fMRI brain responses in healthy volunteers across 3 sessions conducted on separate days using two measures: (1) intraclass correlation coefficients (ICC) calculated based on signal amplitude and (2) spatial overlap. The ICC analysis of pain-related BOLD fMRI responses showed fair-to-moderate intersession reliability in brain areas regarded as part of the cortical pain network. Areas with the highest intersession reliability based on the ICC analysis included the anterior midcingulate cortex, anterior insula, and second somatosensory cortex. Areas with the lowest intersession reliability based on the ICC analysis also showed low spatial reliability; these regions included pregenual anterior cingulate cortex, primary somatosensory cortex, and posterior insula. Thus, this study found regional differences in pain-related BOLD fMRI response reliability, which may provide useful information to guide longitudinal pain studies. A simple motor task (finger-thumb opposition) was performed by the same subjects in the same sessions as the painful heat stimuli were delivered. Intersession reliability of fMRI activation in cortical motor areas was comparable to previously published findings for both spatial overlap and ICC measures, providing support for the validity of the analytical approach used to assess intersession reliability of pain-related fMRI activation. A secondary finding of this study is that the use of standard ICC alone as a measure of reliability may not be sufficient, as the underlying variance structure of an fMRI dataset can result in inappropriately high ICC values; a method to eliminate these false positive results was used in this

  8. Rutgers University Subcontract B611610 Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Soundarajan, Sucheta [Rutgers Univ., New Brunswick, NJ (United States); Eliassi-Rad, Tina [Rutgers Univ., New Brunswick, NJ (United States); Gallagher, Brian [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Pinar, Ali [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2015-09-30

    Given an incomplete (i.e., partially-observed) network, which nodes should we actively probe in order to achieve the highest accuracy for a given network feature? For example, consider a cyber-network administrator who observes only a portion of the network at time t and wants to accurately identify the most important (e.g., highest PageRank) nodes in the complete network. She has a limited budget for probing the network. Of all the nodes she has observed, which should she probe in order to most accurately identify the important nodes? We propose a novel and scalable algorithm, MaxOutProbe, and evaluate it w.r.t. four network features (largest connected component, PageRank, core-periphery, and community detection), five network sampling strategies, and seven network datasets from different domains. Across a range of conditions, MaxOutProbe demonstrates consistently high performance relative to several baseline strategies

  9. Construction Tender Subcontract Selection using Case-based Reasoning

    Directory of Open Access Journals (Sweden)

    Due Luu

    2012-11-01

    Full Text Available Obtaining competitive quotations from suitably qualified subcontractors at tender tim n significantly increase the chance of w1nmng a construction project. Amidst an increasingly growing trend to subcontracting in Australia, selecting appropriate subcontractors for a construction project can be a daunting task requiring the analysis of complex and dynamic criteria such as past performance, suitable experience, track record of competitive pricing, financial stability and so on. Subcontractor selection is plagued with uncertainty and vagueness and these conditions are difficul_t o represent in generalised sets of rules. DeciSIOns pertaining to the selection of subcontr:act?s tender time are usually based on the mtu1t1onand past experience of construction estimators. Case-based reasoning (CBR may be an appropriate method of addressing the chal_lenges of selecting subcontractors because CBR 1s able to harness the experiential knowledge of practitioners. This paper reviews the practicality and suitability of a CBR approach for subcontractor tender selection through the development of a prototype CBR procurement advisory system. In this system, subcontractor selection cases are represented by a set of attributes elicited from experienced construction estimators. The results indicate that CBR can enhance the appropriateness of the selection of subcontractors for construction projects.

  10. Reliability and validity of two frequently used self-administered physical activity questionnaires in adolescents

    Directory of Open Access Journals (Sweden)

    Kurtze Nanna

    2008-07-01

    Full Text Available Abstract Background To create and find accurate and reliable instruments for the measurement of physical activity has been a challenge in epidemiological studies. We investigated the reliability and validity of two different physical activity questionnaires in 71 adolescents aged 13–18 years; the WHO, Health Behaviour in Schoolchildren (HBSC questionnaire, and the International Physical Activity Questionnaire (IPAQ, short version. Methods The questionnaires were administered twice (8–12 days apart to measure reliability. Validity was assessed by comparing answers from the questionnaires with a cardiorespiratory fitness test (VO2peak and seven days activity monitoring with the ActiReg, an instrument measuring physical activity level (PAL and total energy expenditure (TEE. Results Intraclass correlation coefficients for reliability for the WHO HBSC questionnaire were 0.71 for frequency and 0.73 for duration. For the frequency question, there was a significant difference between genders; 0.87 for girls and 0.59 for boys (p 2peak were fair, ranging between 0.29 – 0.39. The WHO HBSC questionnaire measured against VO2peak for girls were acceptable, ranging between 0.30 – 0.55. Both questionnaires, except the walking question in IPAQ, showed a low correlation with PAL and TEE, ranging between 0.01 and 0.29. Conclusion These data indicate that the WHO HBSC questionnaire had substantial reliability and were acceptable instrument for measuring cardiorespiratory fitness, especially among girls. None of the questionnaires however seemed to be a valid instrument for measuring physical activity compared to TEE and PAL in adolescents.

  11. Reliability And Validity Of Turkish Version Of Motor Activity Log-28

    Directory of Open Access Journals (Sweden)

    Burcu Ersöz Hüseyinsinoğlu

    2011-06-01

    Full Text Available OBJECTIVE: The aim of this study was to adapt the Motor Activity Log-28 (MAL-28 into Turkish and probe the reliability and validity of this questionnaire in stroke patients. METHODS: Following the translation of the MAL-28 into Turkish, its reliability and construct validity was examined in 30 stroke patients. For the reliability study, patients were interviewed twice within a three day period, during which no rehabilitative activities were undertaken. The test-retest reliability was determined by using intra-class correlation coefficient (ICC and Spearman correlation coefficient (r; internal consistency was determined by Cronbach's alpha (α. The construct validity was examined by comparing MAL-28 Quality Of Movement (QOM scale and Amount Of Use (AOU scale with Wolf Motor Function Test (WMFT-Performance Time (PT and Functional Ability (FA scores. Furthermore, item-to-scale correlations of AOU and QOM scales were determined and correlation between totol scores of two scales was examined. RESULTS: Turkish version of MAL-28 AOU and QOM scales were reliable (ICC scores were 0.97 and 0.96, respectively and internally consistent (Cronbach’s α value was 0.96 for both scales. Test-retest reliability was supported (AOU, r=0.94; QOM, r=0.93. WMFT FA scores was correlated with both scales (r=0.63. Correlation between WMFT PT and AOU and QOM scales were -0.56 and -0.55. AOU and QOM scales were highly correlated (r=0.95. CONCLUSION: The findings indicate that Turkish version of MAL-28 is reliable and valid in individuals with stroke. Further investigation about its responsiveness is needed before using that version as a primary measurement in clinical trials

  12. Reliability and validity of an internet-based questionnaire measuring lifetime physical activity.

    Science.gov (United States)

    De Vera, Mary A; Ratzlaff, Charles; Doerfling, Paul; Kopec, Jacek

    2010-11-15

    Lifetime exposure to physical activity is an important construct for evaluating associations between physical activity and disease outcomes, given the long induction periods in many chronic diseases. The authors' objective in this study was to evaluate the measurement properties of the Lifetime Physical Activity Questionnaire (L-PAQ), a novel Internet-based, self-administered instrument measuring lifetime physical activity, among Canadian men and women in 2005-2006. Reliability was examined using a test-retest study. Validity was examined in a 2-part study consisting of 1) comparisons with previously validated instruments measuring similar constructs, the Lifetime Total Physical Activity Questionnaire (LT-PAQ) and the Chasan-Taber Physical Activity Questionnaire (CT-PAQ), and 2) a priori hypothesis tests of constructs measured by the L-PAQ. The L-PAQ demonstrated good reliability, with intraclass correlation coefficients ranging from 0.67 (household activity) to 0.89 (sports/recreation). Comparison between the L-PAQ and the LT-PAQ resulted in Spearman correlation coefficients ranging from 0.41 (total activity) to 0.71 (household activity); comparison between the L-PAQ and the CT-PAQ yielded coefficients of 0.58 (sports/recreation), 0.56 (household activity), and 0.50 (total activity). L-PAQ validity was further supported by observed relations between the L-PAQ and sociodemographic variables, consistent with a priori hypotheses. Overall, the L-PAQ is a useful instrument for assessing multiple domains of lifetime physical activity with acceptable reliability and validity.

  13. Reliability and Validity of a Chinese-Translated Version of a Pregnancy Physical Activity Questionnaire.

    Science.gov (United States)

    Xiang, Mi; Konishi, Massayuki; Hu, Huanhuan; Takahashi, Masaki; Fan, Wenbi; Nishimaki, Mio; Ando, Karina; Kim, Hyeon-Ki; Tabata, Hiroki; Arao, Takashi; Sakamoto, Shizuo

    2016-09-01

    Objectives The objectives of the present study were to translate the English version of the Pregnancy Physical Activity Questionnaire into Chinese (PPAQ-C) and to determine its reliability and validity for use by pregnant Chinese women. Methods The study included 224 pregnant women during their first, second, or third trimesters of pregnancy who completed the PPAQ-C on their first visit and wore a uniaxial accelerometer (Lifecorder; Suzuken Co. Ltd) for 7 days. One week after the first visit, we collected the data from the uniaxial accelerometer records, and the women were asked to complete the PPAQ-C again. Results We used intraclass correlation coefficients to determine the reliability of the PPAQ-C. The intraclass correlation coefficients were 0.77 for total activity (light and above), 0.76 for sedentary activity, 0.75 for light activity, 0.59 for moderate activity, and 0.28 for vigorous activity. The intraclass correlation coefficients were 0.74 for "household and caregiving", 0.75 for "occupational" activities, and 0.34 for "sports/exercise". Validity between the PPAQ-C and accelerometer data was determined by Spearman correlation coefficients. Although there were no significant correlations for moderate activity (r = 0.19, P > 0.05) or vigorous activity (r = 0.15, P > 0.05), there were significant correlations for total activity [light and above; r = 0.35, P < 0.01)] and for light activity (r = 0.33, P < 0.01). Conclusions for Practice The PPAQ-C is reliable and moderately accurate for measuring physical activity in pregnant Chinese women.

  14. Structural reliability analysis under evidence theory using the active learning kriging model

    Science.gov (United States)

    Yang, Xufeng; Liu, Yongshou; Ma, Panke

    2017-11-01

    Structural reliability analysis under evidence theory is investigated. It is rigorously proved that a surrogate model providing only correct sign prediction of the performance function can meet the accuracy requirement of evidence-theory-based reliability analysis. Accordingly, a method based on the active learning kriging model which only correctly predicts the sign of the performance function is proposed. Interval Monte Carlo simulation and a modified optimization method based on Karush-Kuhn-Tucker conditions are introduced to make the method more efficient in estimating the bounds of failure probability based on the kriging model. Four examples are investigated to demonstrate the efficiency and accuracy of the proposed method.

  15. Validation and reliability of a Behcet's Syndrome Activity Scale in Korea.

    Science.gov (United States)

    Choi, Hyo Jin; Seo, Mi Ryoung; Ryu, Hee Jung; Baek, Han Joo

    2016-01-01

    We prepared a cross-cultural adaptation of the Behcet's Syndrome Activity Scale (BSAS) and evaluated its reliability and validity in Korea. Fifty patients with Behcet's disease (BD) who attended the Rheumatology Clinic of Gachon University Gil Medical Center were included in this study. The first BSAS questionnaire was administered at each clinic visit, and the second questionnaire was completed at home within 24 hours of the visit. A Behcet's Disease Current Activity Form (BDCAF) and a Behcet's Disease Quality of Life (BDQOL) form were also given to patients. The test-retest reliability was analyzed by intraclass correlation coefficients (ICC). To assess the validity, the total BSAS score was compared with the BDCAF score, the patient/physician global assessment, and the BDQOL by Spearman rank correlation. Twelve males and 38 females were enrolled. The mean age was 48.5 years and the mean disease duration was 6.7 years. Thirty-eight patients (76.0%) returned the questionnaire by mail. For the test-retest reliability, the two assessments were significantly correlated on all 10 items of the BSAS questionnaire (p < 0.05) and the total BSAS score (ICC, 0.925; p < 0.001). The total BSAS score was statistically correlated with the BDQOL, BDCAF, and patient/physician global assessment (p < 0.01). The Korean version of BSAS is a reliable and valid instrument to measure BD activity.

  16. Validation and reliability of a Behcet’s Syndrome Activity Scale in Korea

    Science.gov (United States)

    Choi, Hyo Jin; Seo, Mi Ryoung; Ryu, Hee Jung; Baek, Han Joo

    2016-01-01

    Background/Aims: We prepared a cross-cultural adaptation of the Behcet’s Syndrome Activity Scale (BSAS) and evaluated its reliability and validity in Korea. Methods: Fifty patients with Behcet’s disease (BD) who attended the Rheumatology Clinic of Gachon University Gil Medical Center were included in this study. The first BSAS questionnaire was administered at each clinic visit, and the second questionnaire was completed at home within 24 hours of the visit. A Behcet’s Disease Current Activity Form (BDCAF) and a Behcet’s Disease Quality of Life (BDQOL) form were also given to patients. The test-retest reliability was analyzed by intraclass correlation coefficients (ICC). To assess the validity, the total BSAS score was compared with the BDCAF score, the patient/physician global assessment, and the BDQOL by Spearman rank correlation. Results: Twelve males and 38 females were enrolled. The mean age was 48.5 years and the mean disease duration was 6.7 years. Thirty-eight patients (76.0%) returned the questionnaire by mail. For the test-retest reliability, the two assessments were significantly correlated on all 10 items of the BSAS questionnaire (p < 0.05) and the total BSAS score (ICC, 0.925; p < 0.001). The total BSAS score was statistically correlated with the BDQOL, BDCAF, and patient/physician global assessment (p < 0.01). Conclusions: The Korean version of BSAS is a reliable and valid instrument to measure BD activity. PMID:26767871

  17. Validity and reliability of a home environment inventory for physical activity and media equipment

    Directory of Open Access Journals (Sweden)

    Pereira Mark A

    2008-04-01

    Full Text Available Abstract Background Little is known about how the home environmental supports physical activity and screen media usage. The purpose of this study was to develop and test the reliability and validity of a self-report instrument to comprehensively reflect the availability and accessibility of physical activity and screen media equipment in the home environment. Methods Ten families participated in the initial field testing to provide feedback for instrument development. Thirty one adult participants, each of whom had at least one child 10–17 years old, completed two Physical Activity and Media Inventory (PAMI instruments. The first PAMI was completed simultaneously, but independently, with a research assistant to assess validity. A second PAMI was completed by the participant one week later to assess reliability. Results The adult participants were mostly mothers/female guardians, mean age 38 ± 7.2 years, mostly Caucasian (52%, college educated (65%, living in single family homes (74%. Test-retest reliability was acceptable to strong for all summary variables (physical activity equipment, ICC = 0.76 to 0.99; media equipment, ICC = 0.72 to 0.96. For validation, reports from participants and research assistants were strongly correlated (physical activity, 0.67 – 0.98; media, 0.79 – 0.96. Compared to participants, research assistants reported a greater percentage of physical activity equipment as "in plain view and easy to get to" and a smaller percentage of items as "put away and difficult to get to". Conclusion Our results indicate strong evidence for the reliability and validity of the variables calculated from the PAMI. This self report inventory may be useful in assessing the availability of physical activity and screen media equipment in the home environment and could be used in conjunction with other home assessment tools (food availability, parenting styles and feeding practices to identify obesogenic home environments.

  18. Analysis of the reliability of the active injection safety systems of Angra I

    International Nuclear Information System (INIS)

    Frutuoso e Melo, P.F.F.

    1981-01-01

    The reliability of the active emergency core cooling systems of Angra I nuclear power plant is evaluated. The fault tree analysis is employed. The unavailability of the above cited systems, is calculated. A parametric sensitivity analysis has been performed, due to the existing scattering in the failure and repair rate data of these system's components. The minimal cut sets were determined and, as a final step, a reliability importance analysis has been performed. This final step has required the development of a computer program. The methodology and data from the 'Reactor Safety Study' (Wash-1400) (in which the reliability of safety systems of a tipical PWR plant is calculated), is employed. The unavailability values for the safety systems analysed are too low, thus showing that in most cases the systems analysed are available to mitigate the effects of a loss-of-coolant accident. (Author) [pt

  19. A systematic review of reliability and objective criterion-related validity of physical activity questionnaires

    Science.gov (United States)

    2012-01-01

    Physical inactivity is one of the four leading risk factors for global mortality. Accurate measurement of physical activity (PA) and in particular by physical activity questionnaires (PAQs) remains a challenge. The aim of this paper is to provide an updated systematic review of the reliability and validity characteristics of existing and more recently developed PAQs and to quantitatively compare the performance between existing and newly developed PAQs. A literature search of electronic databases was performed for studies assessing reliability and validity data of PAQs using an objective criterion measurement of PA between January 1997 and December 2011. Articles meeting the inclusion criteria were screened and data were extracted to provide a systematic overview of measurement properties. Due to differences in reported outcomes and criterion methods a quantitative meta-analysis was not possible. In total, 31 studies testing 34 newly developed PAQs, and 65 studies examining 96 existing PAQs were included. Very few PAQs showed good results on both reliability and validity. Median reliability correlation coefficients were 0.62–0.71 for existing, and 0.74–0.76 for new PAQs. Median validity coefficients ranged from 0.30–0.39 for existing, and from 0.25–0.41 for new PAQs. Although the majority of PAQs appear to have acceptable reliability, the validity is moderate at best. Newly developed PAQs do not appear to perform substantially better than existing PAQs in terms of reliability and validity. Future PAQ studies should include measures of absolute validity and the error structure of the instrument. PMID:22938557

  20. A systematic review of reliability and objective criterion-related validity of physical activity questionnaires

    Directory of Open Access Journals (Sweden)

    Helmerhorst Hendrik JF

    2012-08-01

    Full Text Available Abstract Physical inactivity is one of the four leading risk factors for global mortality. Accurate measurement of physical activity (PA and in particular by physical activity questionnaires (PAQs remains a challenge. The aim of this paper is to provide an updated systematic review of the reliability and validity characteristics of existing and more recently developed PAQs and to quantitatively compare the performance between existing and newly developed PAQs. A literature search of electronic databases was performed for studies assessing reliability and validity data of PAQs using an objective criterion measurement of PA between January 1997 and December 2011. Articles meeting the inclusion criteria were screened and data were extracted to provide a systematic overview of measurement properties. Due to differences in reported outcomes and criterion methods a quantitative meta-analysis was not possible. In total, 31 studies testing 34 newly developed PAQs, and 65 studies examining 96 existing PAQs were included. Very few PAQs showed good results on both reliability and validity. Median reliability correlation coefficients were 0.62–0.71 for existing, and 0.74–0.76 for new PAQs. Median validity coefficients ranged from 0.30–0.39 for existing, and from 0.25–0.41 for new PAQs. Although the majority of PAQs appear to have acceptable reliability, the validity is moderate at best. Newly developed PAQs do not appear to perform substantially better than existing PAQs in terms of reliability and validity. Future PAQ studies should include measures of absolute validity and the error structure of the instrument.

  1. Intrarater Reliability and Other Psychometrics of the Health Promoting Activities Scale (HPAS).

    Science.gov (United States)

    Muskett, Rachel; Bourke-Taylor, Helen; Hewitt, Alana

    The Health Promoting Activities Scale (HPAS) measures the self-rated frequency with which adults participate in activities that promote health. We evaluated the internal consistency, construct validity, and intrarater reliability of the HPAS with a cohort of mothers (N = 56) of school-age children. We used an online survey that included the HPAS and measures of mental and physical health. Statistical analysis included intraclass correlation coefficients (ICCs), measurement error, error range, limits of agreement, and minimum detectable change (MDC). The HPAS showed good internal consistency (Cronbach's α = .73). Construct validity was supported by a significant difference in HPAS scores among participants grouped by physical activity level; no other differences were significant. Results included a high aggregate ICC of .90 and an MDC of 5 points. Our evaluation of the HPAS revealed good reliability and stability, suggesting suitability for ongoing evaluation as an outcome measure. Copyright © 2017 by the American Occupational Therapy Association, Inc.

  2. Test-retest reliability of a questionnaire to assess physical environmental factors pertaining to physical activity

    Directory of Open Access Journals (Sweden)

    McGinn Aileen P

    2005-06-01

    Full Text Available Abstract Background Despite the documented benefits of physical activity, many adults do not obtain the recommended amounts. Barriers to physical activity occur at multiple levels, including at the individual, interpersonal, and environmental levels. Only until more recently has there been a concerted focus on how the physical environment might affect physical activity behavior. With this new area of study, self-report measures should be psychometrically tested before use in research studies. Therefore the objective of this study was to document the test-retest reliability of a questionnaire designed to assess physical environmental factors that might be associated with physical activity in a diverse adult population. Methods Test and retest surveys were conducted over the telephone with 106 African American and White women and men living in either Forsyth County, North Carolina or Jackson, Mississippi. Reliability of self-reported environmental factors across four domains (e.g., access to facilities and destinations, functionality and safety, aesthetics, natural environment was determined using intraclass correlation coefficients (ICC overall and separately by gender and race. Results Generally items displayed moderate and sometimes substantial reliability (ICC between 0.4 to 0.8, with a few differences by gender or race, across each of the domains. Conclusion This study provides some psychometric evidence for the use of many of these questions in studies examining the effect of self-reported physical environmental measures on physical activity behaviors, among African American and White women and men.

  3. Reliability of the Brazilian version of the Physical Activity Checklist Interview in children.

    Science.gov (United States)

    Adami, Fernando; Cruciani, Fernanda; Douek, Michelle; Sewell, Carolina Dumit; Mariath, Aline Brandão; Hinnig, Patrícia de Fragas; Freaza, Silvia Rafaela Mascarenhas; Bergamaschi, Denise Pimentel

    2011-04-01

    To assess the reliability of the Lista de Atividades Físicas (Brazilian version of the Physical Activity Checklist Interview) in children. The study is part of a cross-cultural adaptation of the Physical Activity Checklist Interview, conducted with 83 school children aged between seven and ten years, enrolled between the 2nd and 5th grades of primary education in the city of São Paulo, Southeastern Brazil, in 2008. The questionnaire was responded by children through individual interviews. It is comprised of a list of 21 moderate to vigorous physical activities performed on the previous day, it is divided into periods (before, during and after school) and it has a section for interview assessment. This questionnaire enables the quantification of time spent in physical and sedentary activities and the total and weighed metabolic costs. Reliability was assessed by comparing two interviews conducted with a mean interval of three hours. For the interview assessment, data from the first interview and those from an external evaluator were compared. Bland-Altman's proposal, the intraclass correlation coefficient and Lin's concordance correlation coefficient were used to assess reliability. The intraclass correlation coefficient lower limits for the outcomes analyzed varied from 0.84 to 0.96. Precision and agreement varied between 0.83 and 0.97 and between 0.99 and 1, respectively. The line estimated from the pairs of values obtained in both interviews indicates high data precision. The interview item showing the poorest result was the ability to estimate time (fair in 27.7% of interviews). Interview assessment items showed intraclass correlation coefficients between 0.60 and 0.70, except for level of cooperation (0.46). The Brazilian version of the Physical Activity Checklist Interview shows high reliability to assess physical and sedentary activity on the previous day in children.

  4. Validity and reliability of a modified english version of the physical activity questionnaire for adolescents.

    Science.gov (United States)

    Aggio, Daniel; Fairclough, Stuart; Knowles, Zoe; Graves, Lee

    2016-01-01

    Adaptation of physical activity self-report questionnaires is sometimes required to reflect the activity behaviours of diverse populations. The processes used to modify self-report questionnaires though are typically underreported. This two-phased study used a formative approach to investigate the validity and reliability of the Physical Activity Questionnaire for Adolescents (PAQ-A) in English youth. Phase one examined test content and response process validity and subsequently informed a modified version of the PAQ-A. Phase two assessed the validity and reliability of the modified PAQ-A. In phase one, focus groups (n = 5) were conducted with adolescents (n = 20) to investigate test content and response processes of the original PAQ-A. Based on evidence gathered in phase one, a modified version of the questionnaire was administered to participants (n = 169, 14.5 ± 1.7 years) in phase two. Internal consistency and test-retest reliability were assessed using Cronbach's alpha and intra-class correlations, respectively. Spearman correlations were used to assess associations between modified PAQ-A scores and accelerometer-derived physical activity, self-reported fitness and physical activity self-efficacy. Phase one revealed that the original PAQ-A was unrepresentative for English youth and that item comprehension varied. Contextual and population/cultural-specific modifications were made to the PAQ-A for use in the subsequent phase. In phase two, modified PAQ-A scores had acceptable internal consistency (α = 0.72) and test-retest reliability (ICC = 0.78). Modified PAQ-A scores were significantly associated with objectively assessed moderate-to-vigorous physical activity (r = 0.39), total physical activity (r = 0.42), self-reported fitness (r = 0.35), and physical activity self-efficacy (r = 0.32) (p ≤ 0.01). The modified PAQ-A had acceptable internal consistency and test-retest reliability. Modified PAQ-A scores

  5. Reliability of Using Motion Sensors to Measure Children’s Physical Activity Levels in Exergaming

    Directory of Open Access Journals (Sweden)

    Nan Zeng

    2018-05-01

    Full Text Available Objectives: This study examined the reliability of two objective measurement tools in assessing children’s physical activity (PA levels in an exergaming setting. Methods: A total of 377 children (190 girls, Mage = 8.39, SD = 1.55 attended the 30-min exergaming class every other day for 18 weeks. Children’s PA levels were concurrently measured by NL-1000 pedometer and ActiGraph GT3X accelerometer, while children’s steps per min and time engaged in sedentary, light, and moderate-to-vigorous PA were estimated, respectively. Results: The results of intraclass correlation coefficient (ICC indicated a low degree of reliability (single measures ICC = 0.03 in accelerometers. ANOVA did detect a possible learning effect for 27 classes (p < 0.01, and the single measures ICC was 0.20 for pedometers. Moreover, there was no significant positive relationship between steps per min and time spent in moderate-to-vigorous physical activity (MVPA. Finally, only 1.3% variance was explained by pedometer as a predictor using Hierarchical Linear Modeling to further explore the relationship between pedometer and accelerometer data. Conclusions: The NL-1000 pedometers and ActiGraph GT3X accelerometers have low reliability in assessing elementary school children’s PA levels during exergaming. More research is warranted in determining the reliable and accurate measurement information regarding the use of modern devices in exergaming setting.

  6. Reliability and Validity of Ten Consumer Activity Trackers Depend on Walking Speed.

    Science.gov (United States)

    Fokkema, Tryntsje; Kooiman, Thea J M; Krijnen, Wim P; VAN DER Schans, Cees P; DE Groot, Martijn

    2017-04-01

    To examine the test-retest reliability and validity of ten activity trackers for step counting at three different walking speeds. Thirty-one healthy participants walked twice on a treadmill for 30 min while wearing 10 activity trackers (Polar Loop, Garmin Vivosmart, Fitbit Charge HR, Apple Watch Sport, Pebble Smartwatch, Samsung Gear S, Misfit Flash, Jawbone Up Move, Flyfit, and Moves). Participants walked three walking speeds for 10 min each; slow (3.2 km·h), average (4.8 km·h), and vigorous (6.4 km·h). To measure test-retest reliability, intraclass correlations (ICC) were determined between the first and second treadmill test. Validity was determined by comparing the trackers with the gold standard (hand counting), using mean differences, mean absolute percentage errors, and ICC. Statistical differences were calculated by paired-sample t tests, Wilcoxon signed-rank tests, and by constructing Bland-Altman plots. Test-retest reliability varied with ICC ranging from -0.02 to 0.97. Validity varied between trackers and different walking speeds with mean differences between the gold standard and activity trackers ranging from 0.0 to 26.4%. Most trackers showed relatively low ICC and broad limits of agreement of the Bland-Altman plots at the different speeds. For the slow walking speed, the Garmin Vivosmart and Fitbit Charge HR showed the most accurate results. The Garmin Vivosmart and Apple Watch Sport demonstrated the best accuracy at an average walking speed. For vigorous walking, the Apple Watch Sport, Pebble Smartwatch, and Samsung Gear S exhibited the most accurate results. Test-retest reliability and validity of activity trackers depends on walking speed. In general, consumer activity trackers perform better at an average and vigorous walking speed than at a slower walking speed.

  7. 105-N Basin sediment removal subcontract acquisition strategy plan

    International Nuclear Information System (INIS)

    Wilsey, D.J.

    1997-01-01

    The 105-N Basin Sediment Removal Subcontract Acquisition Strategy Plan provides a detailed set of actions to specify and procure services and equipment for removal of approximately 400 ft 3 (wet) of radioactive sediment. The plan outlines a cost-effective approach to remove this sediment safely and within an aggressive schedule. This 105-N Basin Sediment Removal Strategy Plan includes the following key elements: a current vendor survey of capabilities and interest in this type of work, confirming that qualified, competitive sources are available, and in the time frame required; a systematic review of the various options for sediment disposal in enough detail to exhaustively uncover pros and cons of each approach; use of a workshop approach to assess different ways to accomplish the work and ensure the disposal options considered are cost and schedule effective; integration of the complicated sampling and characterization process, which is essential to successful execution of the procurement scheme; review of the various subcontracting options to maximize the use of existing technology, existing equipment, and specialized expertise; detailed early planning and strategizing for early identification of problems that can be solved early before they become restraints or potential added costs; tailored design schedule to cover three alternate approaches so that sample characterization will not delay engineering preparation for disposal; support required from various organizations onsite as well as subcontractors, well in advance of the need for that support, improving availability of the proper personnel to support schedule and cost objectives; and provides the possible opportunity to process the sediment in the valve pit and pump pit through this same subcontractor's process

  8. Validity and Reliability of International Physical Activity Questionnaire-Short Form in Chinese Youth

    Science.gov (United States)

    Wang, Chao; Chen, Peijie; Zhuang, Jie

    2013-01-01

    Purpose: The psychometric profiles of the widely used International Physical Activity Questionnaire-Short Form (IPAQ-SF) in Chinese youth have not been reported. The purpose of this study was to examine the validity and reliability of the IPAQ-SF using a sample of Chinese youth. Method: One thousand and twenty-one youth (M[subscript age] = 14.26 ±…

  9. Reliability of the Danish version of the short questionnaire to assess health-enhancing physical activity (SQUASH)

    DEFF Research Database (Denmark)

    Sørensen, Lotte; Mikkelsen, Lone Ramer; Jacobsen, Julie Sandell

    2018-01-01

    Objective: To translate and cross-cultural adapt the short questionnaire to assess health-enhancing physical activity (SQUASH) to Danish, and to investigate the Danish version’s reliability. Methods: The study was conducted according to the COSMIN guidelines. The reliability was evaluated in 53...... and indicates that the Danish version of SQUASH can be used to distinguish between individuals; however, the absolute reliability was poor and SQUASH is not considered suitable for easuring physical activity on an individual level....

  10. 48 CFR 1419.705-2 - Determining the need for a subcontracting plan.

    Science.gov (United States)

    2010-10-01

    ... INTERIOR SOCIOECONOMIC PROGRAMS SMALL BUSINESS PROGRAMS The Small Business Subcontracting Program 1419.705... possibilities exist for a proposed contractual action shall be reviewed by the BUDS prior to the approval by a...

  11. Improved reliability of wind turbine towers with active tuned mass dampers (ATMDs)

    Science.gov (United States)

    Fitzgerald, Breiffni; Sarkar, Saptarshi; Staino, Andrea

    2018-04-01

    Modern multi-megawatt wind turbines are composed of slender, flexible, and lightly damped blades and towers. These components exhibit high susceptibility to wind-induced vibrations. As the size, flexibility and cost of the towers have increased in recent years, the need to protect these structures against damage induced by turbulent aerodynamic loading has become apparent. This paper combines structural dynamic models and probabilistic assessment tools to demonstrate improvements in structural reliability when modern wind turbine towers are equipped with active tuned mass dampers (ATMDs). This study proposes a multi-modal wind turbine model for wind turbine control design and analysis. This study incorporates an ATMD into the tower of this model. The model is subjected to stochastically generated wind loads of varying speeds to develop wind-induced probabilistic demand models for towers of modern multi-megawatt wind turbines under structural uncertainty. Numerical simulations have been carried out to ascertain the effectiveness of the active control system to improve the structural performance of the wind turbine and its reliability. The study constructs fragility curves, which illustrate reductions in the vulnerability of towers to wind loading owing to the inclusion of the damper. Results show that the active controller is successful in increasing the reliability of the tower responses. According to the analysis carried out in this paper, a strong reduction of the probability of exceeding a given displacement at the rated wind speed has been observed.

  12. [Reliability and validity of the PAQ-A questionnaire to assess physical activity in Spanish adolescents].

    Science.gov (United States)

    Martínez-Gómez, David; Martínez-de-Haro, Vicente; Pozo, Tamara; Welk, Gregory J; Villagra, Ariel; Calle, Marisa E; Marcos, Ascensión; Veiga, Oscar L

    2009-01-01

    Questionnaires are feasible instruments to assess physical activity (PA) in large samples. The aim of the current study was to evaluate the reliability and validity of the PAQ-A questionnaire in Spanish adolescents using the measurement of PA by accelerometer as criterion. In a sample of 82 adolescents, aged 12 to 17 years, 1-week PAQ-A test-retest was administered. Reliability was analyzed by the Intraclass Correlation Coefficient (ICC) and the internal consistency by the Cronbach's alpha Coefficient. Two hundred thirty-two adolescents, aged 13-17 years, completed the PAQ-A and wore the ActiGraph GT1M accelerometer during 7-days. The PAQ-A was compared against total PA and moderate to vigorous PA (MVPA) obtained by the accelerometer. Test-retest reliability showed ICC = 0.71 for the final score of PAQ-A. Internal consistency was alpha = 0.65 in the first self-report, alpha = 0.67 in the retest in 82 adolescents sample, and alpha = 0.74 in the 232 adolescents sample. The PAQ-A was moderately correlated with total PA (rho = 0.39) and MVPA (rho= 0.34) assessed by the accelerometer. The PAQ-A obtained significantly moderate correlations in boys but not in girls against the accelerometer. The PAQ-A questionnaire shows an adequate reliability and a reasonable validity for assessing PA in Spanish adolescents.

  13. The Challenge Posed by Geomagnetic Activity to Electric Power Reliability: Evidence From England and Wales

    Science.gov (United States)

    Forbes, Kevin F.; St. Cyr, O. C.

    2017-10-01

    This paper addresses whether geomagnetic activity challenged the reliability of the electric power system during part of the declining phase of solar cycle 23. Operations by National Grid in England and Wales are examined over the period of 11 March 2003 through 31 March 2005. This paper examines the relationship between measures of geomagnetic activity and a metric of challenged electric power reliability known as the net imbalance volume (NIV). Measured in megawatt hours, NIV represents the sum of all energy deployments initiated by the system operator to balance the electric power system. The relationship between geomagnetic activity and NIV is assessed using a multivariate econometric model. The model was estimated using half-hour settlement data over the period of 11 March 2003 through 31 December 2004. The results indicate that geomagnetic activity had a demonstrable effect on NIV over the sample period. Based on the parameter estimates, out-of-sample predictions of NIV were generated for each half hour over the period of 1 January to 31 March 2005. Consistent with the existence of a causal relationship between geomagnetic activity and the electricity market imbalance, the root-mean-square error of the out-of-sample predictions of NIV is smaller; that is, the predictions are more accurate, when the statistically significant estimated effects of geomagnetic activity are included as drivers in the predictions.

  14. A novel approach for reliable detection of cathepsin S activities in mouse antigen presenting cells.

    Science.gov (United States)

    Steimle, Alex; Kalbacher, Hubert; Maurer, Andreas; Beifuss, Brigitte; Bender, Annika; Schäfer, Andrea; Müller, Ricarda; Autenrieth, Ingo B; Frick, Julia-Stefanie

    2016-05-01

    Cathepsin S (CTSS) is a eukaryotic protease mostly expressed in professional antigen presenting cells (APCs). Since CTSS activity regulation plays a role in the pathogenesis of various autoimmune diseases like multiple sclerosis, atherosclerosis, Sjögren's syndrome and psoriasis as well as in cancer progression, there is an ongoing interest in the reliable detection of cathepsin S activity. Various applications have been invented for specific detection of this enzyme. However, most of them have only been shown to be suitable for human samples, do not deliver quantitative results or the experimental procedure requires technical equipment that is not commonly available in a standard laboratory. We have tested a fluorogen substrate, Mca-GRWPPMGLPWE-Lys(Dnp)-DArg-NH2, that has been described to specifically detect CTSS activities in human APCs for its potential use for mouse samples. We have modified the protocol and thereby offer a cheap, easy, reproducible and quick activity assay to detect CTSS activities in mouse APCs. Since most of basic research on CTSS is performed in mice, this method closes a gap and offers a possibility for reliable and quantitative CTSS activity detection that can be performed in almost every laboratory. Copyright © 2016. Published by Elsevier B.V.

  15. Adaptation of My Classroom Activities Scale to Turkish Culture: Validity and Reliability Study

    Directory of Open Access Journals (Sweden)

    Kaan Zülfikar DENİZ

    2017-06-01

    Full Text Available Student interest in class activities, their enjoyment of activity topics, their ability to make choices about the activity topics, and opportunities for students to challenge themselves during activities are among basic components that support their higher level learning. Properties of educational activities that make them interesting, enjoyable, and challenging while allowing students with choices are also among properties that are known to be necessary in all educational content, processes, and products within educational systems of the 21st century. Consequently, measuring these properties is also of great importance. The goal of this study is to perform the Turkish adaptation of the My Class Activities Scale, developed by Gentry and Gable (2001 in the United States and subsequently adapted to the Korean, Chinese, and Arabic languages. To this end, data was collected from 214 students attending 3rd, 4th, 5th, 6th, 7th, and 8th grades during the 2015-2016 academic year. As part of the validity study for the scale, the factor structure obtained from the original development of the scale was tested using the Confirmatory Factor Analysis (CFA method. Moreover, item-total correlation and inter-dimensional correlation analyses were also performed as part of the validity study. In studying the reliability of the scale, the Cronbach-Alpha reliability coefficients were estimated (Cronbach alpha values ranged between 0.82-0.90. Based on the results, the factor structure of the scale was verified in parallel with the original development work for the scale. In conclusion, the validity and reliability of using the scale in Turkey was established, contributing a new scale adaptation to the Turkish literature for use in different studies.

  16. Validity and reliability of the Fels physical activity questionnaire for children.

    Science.gov (United States)

    Treuth, Margarita S; Hou, Ningqi; Young, Deborah R; Maynard, L Michele

    2005-03-01

    The aim was to evaluate the reliability and validity of the Fels physical activity questionnaire (PAQ) for children 7-19 yr of age. A cross-sectional study was conducted among 130 girls and 99 boys in elementary (N=70), middle (N=81), and high (N=78) schools in rural Maryland. Weight and height were measured on the initial school visit. All the children then wore an Actiwatch accelerometer for 6 d. The Fels PAQ for children was given on two separate occasions to evaluate reliability and was compared with accelerometry data to evaluate validity. The reliability of the Fels PAQ for the girls, boys, and the elementary, middle, and high school age groups range was r=0.48-0.76. For the elementary school children, the correlation coefficient examining validity between the Fels PAQ total score and Actiwatch (counts per minute) was 0.34 (P=0.004). The correlation coefficients were lower in middle school (r=0.11, P=0.31) and high school (r=0.21, P=0.006) adolescents. The sport index of the Fels PAQ for children had the highest validity in the high school participants (r=0.34, P=0.002). The Fels PAQ for children is moderately reliable for all age groups of children. Validity of the Fels PAQ for children is acceptable for elementary and high school students when the total activity score or the sport index is used. The sport index was similar to the total score for elementary students but was a better measure of physical activity among high school students.

  17. Measuring physical activity in young people with cerebral palsy: validity and reliability of the ActivPAL™ monitor.

    Science.gov (United States)

    Bania, Theofani

    2014-09-01

    We determined the criterion validity and the retest reliability of the ΑctivPAL™ monitor in young people with diplegic cerebral palsy (CP). Activity monitor data were compared with the criterion of video recording for 10 participants. For the retest reliability, activity monitor data were collected from 24 participants on two occasions. Participants had to have diplegic CP and be between 14 and 22 years of age. They also had to be of Gross Motor Function Classification System level II or III. Outcomes were time spent in standing, number of steps (physical activity) and time spent in sitting (sedentary behaviour). For criterion validity, coefficients of determination were all high (r(2)  ≥ 0.96), and limits of group agreement were relatively narrow, but limits of agreement for individuals were narrow only for number of steps (≥5.5%). Relative reliability was high for number of steps (intraclass correlation coefficient = 0.87) and moderate for time spent in sitting and lying, and time spent in standing (intraclass correlation coefficients = 0.60-0.66). For groups, changes of up to 7% could be due to measurement error with 95% confidence, but for individuals, changes as high as 68% could be due to measurement error. The results support the criterion validity and the retest reliability of the ActivPAL™ to measure physical activity and sedentary behaviour in groups of young people with diplegic CP but not in individuals. Copyright © 2014 John Wiley & Sons, Ltd.

  18. Validity and reliability of an adapted arabic version of the long international physical activity questionnaire.

    Science.gov (United States)

    Helou, Khalil; El Helou, Nour; Mahfouz, Maya; Mahfouz, Yara; Salameh, Pascale; Harmouche-Karaki, Mireille

    2017-07-24

    The International Physical Actvity Questionnaire (IPAQ) is a validated tool for physical activity assessment used in many countries however no Arabic version of the long-form of this questionnaire exists to this date. Hence, the aim of this study was to cross-culturally adapt and validate an Arabic version of the long International Physical Activity Questionnaire (AIPAQ) equivalent to the French version (F-IPAQ) in a Lebanese population. The guidelines for cross-cultural adaptation provided by the World Health Organization and the International Physical Activity Questionnaire committee were followed. One hundred fifty-nine students and staff members from Saint Joseph University of Beirut were randomly recruited to participate in the study. Items of the A-IPAQ were compared to those from the F-IPAQ for concurrent validity using Spearman's correlation coefficient. Content validity of the questionnaire was assessed using factor analysis for the A-IPAQ's items. The physical activity indicators derived from the A-IPAQ were compared with the body mass index (BMI) of the participants for construct validity. The instrument was also evaluated for internal consistency reliability using Cronbach's alpha and Intraclass Correlation Coefficient (ICC). Finally, thirty-one participants were asked to complete the A-IPAQ on two occasions three weeks apart to examine its test-retest reliability. Bland-Altman analyses were performed to evaluate the extent of agreement between the two versions of the questionnaire and its repeated administrations. A high correlation was observed between answers of the F-IPAQ and those of the A-IPAQ, with Spearman's correlation coefficients ranging from 0.91 to 1.00 (p reliability with Cronbach's alpha ranging from 0.769-1.00 (p reliability for most of its items (ICC ranging from 0.66-0.96; p validity and reliability for the assessment of physical activity among Lebanese adults. More studies are necessary in the future to assess its validity compared

  19. Reliability of smartphone-based gait measurements for quantification of physical activity/inactivity levels.

    Science.gov (United States)

    Ebara, Takeshi; Azuma, Ryohei; Shoji, Naoto; Matsukawa, Tsuyoshi; Yamada, Yasuyuki; Akiyama, Tomohiro; Kurihara, Takahiro; Yamada, Shota

    2017-11-25

    Objective measurements using built-in smartphone sensors that can measure physical activity/inactivity in daily working life have the potential to provide a new approach to assessing workers' health effects. The aim of this study was to elucidate the characteristics and reliability of built-in step counting sensors on smartphones for development of an easy-to-use objective measurement tool that can be applied in ergonomics or epidemiological research. To evaluate the reliability of step counting sensors embedded in seven major smartphone models, the 6-minute walk test was conducted and the following analyses of sensor precision and accuracy were performed: 1) relationship between actual step count and step count detected by sensors, 2) reliability between smartphones of the same model, and 3) false detection rates when sitting during office work, while riding the subway, and driving. On five of the seven models, the inter-class correlations coefficient (ICC (3,1) ) showed high reliability with a range of 0.956-0.993. The other two models, however, had ranges of 0.443-0.504 and the relative error ratios of the sensor-detected step count to the actual step count were ±48.7%-49.4%. The level of agreement between the same models was ICC (3,1) : 0.992-0.998. The false detection rates differed between the sitting conditions. These results suggest the need for appropriate regulation of step counts measured by sensors, through means such as correction or calibration with a predictive model formula, in order to obtain the highly reliable measurement results that are sought in scientific investigation.

  20. Active Listening Attitude Scale (ALAS: Reliability and Validity in a Nationwide Sample of Greek Educators

    Directory of Open Access Journals (Sweden)

    Ntina Kourmousi

    2017-03-01

    Full Text Available The present study examined the Active Listening Attitude Scale (ALAS validity and reliability in a sample of 3955 Greek educators. The sample was randomly split and an exploratory factor analysis (EFA was conducted in the even subsample to evaluate the scale’s construct validity. A confirmatory factor analysis (CFA was performed in the odd subsample to confirm the three-factor model identified by the EFA. The chi square test (χ2 of the model was significant (p < 0.05, due to the large sample size. The root mean square error of approximation (RMSEA, the comparative fit index (CFI and the goodness of fit index (GFI values were 0.079, 0.969 and 0.960, respectively, further supporting the fit of the three-factor model. Cronbach’s alpha coefficient was used to test internal consistency reliability and was satisfactory exceeding 0.72 for ALAS subscales. The intercorrelations of the three subscales were all positive and significant (p < 0.001, ranging from 0.20 to 0.42. Student’s t-tests and the computation of effect sizes revealed that women scored higher on Listening Skill and Conversation Opportunity, while principals and participants trained on mental health promotion scored higher on all three subscales. The analyses confirmed the three-factor model of ALAS and demonstrated its validity and reliability in measuring Greek teachers’ active listening attitudes.

  1. Current activities and future trends in reliability analysis and probabilistic safety assessment in Hungary

    International Nuclear Information System (INIS)

    Hollo, E.; Toth, J.

    1986-01-01

    In Hungary reliability analysis (RA) and probabilistic safety assessment (PSA) of nuclear power plants was initiated 3 years ago. First, computer codes for automatic fault tree analysis (CAT, PREP) and numerical evaluation (REMO, KITT1,2) were adapted. Two main case studies - detailed availability/reliability calculation of diesel sets and analysis of safety systems influencing event sequences induced by large LOCA - were performed. Input failure data were taken from publications, a need for failure and reliability data bank was revealed. Current and future activities involves: setup of national data bank for WWER-440 units; full-scope level-I PSA of PAKS NPP in Hungary; operational safety assessment of particular problems at PAKS NPP. In the present article the state of RA and PSA activities in Hungary, as well as the main objectives of ongoing work are described. A need for international cooperation (for unified data collection of WWER-440 units) and for IAEA support (within Interregional Program INT/9/063) is emphasized. (author)

  2. Reliability assessment of underground pipelines under the combined effect of active corrosion and residual stress

    International Nuclear Information System (INIS)

    Amirat, A.; Mohamed-Chateauneuf, A.; Chaoui, K.

    2006-01-01

    Lifetime management of underground pipelines is mandatory for safe hydrocarbon transmission and distribution systems. Reliability analysis is recognized as a powerful decision-making tool for risk-based design and maintenance. Both the residual stresses generated during the manufacturing process and in-service corrosion reduce the ability to resist internal and external loading. In this study, the residual stress distribution in large diameter pipes has been characterized experimentally in order to be coupled with the corrosion model. During the pipe lifetime, residual stress relaxation occurs due to the loss of pipe thickness as material layers are consumed by corrosion. The reliability-based assessment of residual stress effects is applied to underground pipelines under a roadway, with and without active corrosion. It has been found that the residual stress greatly increases the failure probability, especially in the early stage of the pipe lifetime

  3. Reliability and validity of a physical activity social support assessment scale in adolescents - ASAFA Scale

    Directory of Open Access Journals (Sweden)

    José Cazuza de Farias Júnior

    2014-06-01

    Full Text Available Objective: To analyze the reliability and validity of a scale used to measure social support for physical activity in adolescents - ASAFA Scale. Methods: This study included 2,755 adolescents (57.6% girls, 16.5 ± 1.2 years of age, from Joao Pessoa, Paraiba, Brazil. Initially, the scale was consisted of 12 items (6 for social support from parents and 6 from friends. The reliability of the scale was estimated by Cronbach's alpha coefficient (α, by the Composite Reliability (CR, and by the model with two factors and factorial invariance by Confirmatory Factor Analysis (CFA adequacy. Results: The CFA results confirmed that the social support scale contained two factors (factor 1: social support from parents; factor 2: social support from friends with five items each (one item was excluded from each scale, all with high factor loadings (> 0.65 and acceptable adjustment indexes (RMR = 0.050; RMSEA = 0.063; 90%CI: 0.060 - 0.067; AGFI = 0.903; GFI = 0.940; CFI = 0.934, NNFI = 0.932. The internal consistency was satisfactory (parents: α ≥ 0.77 and CR ≥ 0.83; friends: α ≥ 0.87 and CR ≥ 0.91. The scale's factorial invariance was confirmed (p > 0.05; Δχ2 and ΔCFI ≤ 0.01 across all subgroups analyzed (gender, age, economic class. The construct validity was evidenced by the significant association (p < 0.05 between the adolescents physical activity level and the social support score of parents (rho = 0.29 and friends (rho = 0.39. Conclusions: The scale showed reliability, factorial invariance and satisfactory validity, so it can be used in studies with adolescents.

  4. Validity and reliability of Nike + Fuelband for estimating physical activity energy expenditure.

    Science.gov (United States)

    Tucker, Wesley J; Bhammar, Dharini M; Sawyer, Brandon J; Buman, Matthew P; Gaesser, Glenn A

    2015-01-01

    The Nike + Fuelband is a commercially available, wrist-worn accelerometer used to track physical activity energy expenditure (PAEE) during exercise. However, validation studies assessing the accuracy of this device for estimating PAEE are lacking. Therefore, this study examined the validity and reliability of the Nike + Fuelband for estimating PAEE during physical activity in young adults. Secondarily, we compared PAEE estimation of the Nike + Fuelband with the previously validated SenseWear Armband (SWA). Twenty-four participants (n = 24) completed two, 60-min semi-structured routines consisting of sedentary/light-intensity, moderate-intensity, and vigorous-intensity physical activity. Participants wore a Nike + Fuelband and SWA, while oxygen uptake was measured continuously with an Oxycon Mobile (OM) metabolic measurement system (criterion). The Nike + Fuelband (ICC = 0.77) and SWA (ICC = 0.61) both demonstrated moderate to good validity. PAEE estimates provided by the Nike + Fuelband (246 ± 67 kcal) and SWA (238 ± 57 kcal) were not statistically different than OM (243 ± 67 kcal). Both devices also displayed similar mean absolute percent errors for PAEE estimates (Nike + Fuelband = 16 ± 13 %; SWA = 18 ± 18 %). Test-retest reliability for PAEE indicated good stability for Nike + Fuelband (ICC = 0.96) and SWA (ICC = 0.90). The Nike + Fuelband provided valid and reliable estimates of PAEE, that are similar to the previously validated SWA, during a routine that included approximately equal amounts of sedentary/light-, moderate- and vigorous-intensity physical activity.

  5. Reliability and Validity of the Early Years Physical Activity Questionnaire (EY-PAQ

    Directory of Open Access Journals (Sweden)

    Daniel D. Bingham

    2016-05-01

    Full Text Available Measuring physical activity (PA and sedentary time (ST in young children (<5 years is complex. Objective measures have high validity but require specialist expertise, are expensive, and can be burdensome for participants. A proxy-report instrument for young children that accurately measures PA and ST is needed. The aim of this study was to assess the reliability and validity of the Early Years Physical Activity Questionnaire (EY-PAQ. In a setting where English and Urdu are the predominant languages spoken by parents of young children, a sample of 196 parents and their young children (mean age 3.2 ± 0.8 years from Bradford, UK took part in the study. A total of 156 (79.6% questionnaires were completed in English and 40 (20.4% were completed in transliterated Urdu. A total of 109 parents took part in the reliability aspect of the study, which involved completion of the EY-PAQ on two occasions (7.2 days apart; standard deviation (SD = 1.1. All 196 participants took part in the validity aspect which involved comparison of EY-PAQ scores against accelerometry. Validty anaylsis used all data and data falling with specific MVPA and ST boundaries. Reliability was assessed using intra-class correlations (ICC and validity by Bland–Altman plots and rank correlation coefficients. The test re-test reliability of the EY-PAQ was moderate for ST (ICC = 0.47 and fair for moderate-to-vigorous physical activity (MVPA(ICC = 0.35. The EY-PAQ had poor agreement with accelerometer-determined ST (mean difference = −87.5 min·day−1 and good agreement for MVPA (mean difference = 7.1 min·day−1 limits of agreement were wide for all variables. The rank correlation coefficient was non-significant for ST (rho = 0.19 and significant for MVPA (rho = 0.30. The EY-PAQ has comparable validity and reliability to other PA self-report tools and is a promising population-based measure of young children’s habitual MVPA but not ST. In situations when objective methods are not

  6. Human Reliability Assessment and Human Performance Evaluation: Research and Analysis Activities at the U.S. NRC

    International Nuclear Information System (INIS)

    Ramey-Smith, A.M.

    1998-01-01

    The author indicates the themes of the six programs identified by the US NRC mission on human performance and human reliability activities. They aim at developing the technical basis to support human performance, at developing and updating a model of human performance and human reliability, at fostering national and international dialogue and cooperation efforts on human performance evaluation, at conducting operating events analysis and database development, and at providing support to human performance and human reliability inspection

  7. Reliability of Wearable Inertial Measurement Units to Measure Physical Activity in Team Handball.

    Science.gov (United States)

    Luteberget, Live S; Holme, Benjamin R; Spencer, Matt

    2018-04-01

    To assess the reliability and sensitivity of commercially available inertial measurement units to measure physical activity in team handball. Twenty-two handball players were instrumented with 2 inertial measurement units (OptimEye S5; Catapult Sports, Melbourne, Australia) taped together. They participated in either a laboratory assessment (n = 10) consisting of 7 team handball-specific tasks or field assessment (n = 12) conducted in 12 training sessions. Variables, including PlayerLoad™ and inertial movement analysis (IMA) magnitude and counts, were extracted from the manufacturers' software. IMA counts were divided into intensity bands of low (1.5-2.5 m·s -1 ), medium (2.5-3.5 m·s -1 ), high (>3.5 m·s -1 ), medium/high (>2.5 m·s -1 ), and total (>1.5 m·s -1 ). Reliability between devices and sensitivity was established using coefficient of variation (CV) and smallest worthwhile difference (SWD). Laboratory assessment: IMA magnitude showed a good reliability (CV = 3.1%) in well-controlled tasks. CV increased (4.4-6.7%) in more-complex tasks. Field assessment: Total IMA counts (CV = 1.8% and SWD = 2.5%), PlayerLoad (CV = 0.9% and SWD = 2.1%), and their associated variables (CV = 0.4-1.7%) showed a good reliability, well below the SWD. However, the CV of IMA increased when categorized into intensity bands (2.9-5.6%). The reliability of IMA counts was good when data were displayed as total, high, or medium/high counts. A good reliability for PlayerLoad and associated variables was evident. The CV of the previously mentioned variables was well below the SWD, suggesting that OptimEye's inertial measurement unit and its software are sensitive for use in team handball.

  8. Validity and reliability of the Arabic version of Activities of Daily Living (ADL

    Directory of Open Access Journals (Sweden)

    Doumit Jacqueline

    2009-03-01

    Full Text Available Abstract Background The Activity of Daily Living (ADL is an instrument that screens elderly respondents for physical functioning and assesses whether they are dependent or independent in their daily activities. This study demonstrates a translation procedure and obtains the reliability and validity of a translated, Arabic ADL. Methods The ADL was translated to Arabic through a forward translation method followed by a committee-consensual approach. The ADL and the Arabic Mini-Mental State Examination (AMMSE were administered to an opportunistic sample of 354 Lebanese elderly living in nursing homes who did not have dementia. Results Reliability split half measures, sensitivity, and negative predictive values were high across all dimensions of the ADL with the exception of feeding. There were non-significant differences on the scored ADL between the three age groups: young age, middle age and older old. In addition, a non-significant difference was found on the scored ADL between the high and low AMMSE scores. Conclusion Overall, the translated ADL was consistent and valid measure for assessing daily activities in elderly nursing home residents. As it is quick and easy to use, the ADL in Arabic could help caregivers and doctors to prescribe appropriate physical exercise for elderly Arabic speaking patients.

  9. Using Wireless Pedometers to Measure Children’s Physical Activity: How Reliable is the Fitbit Zip?

    Directory of Open Access Journals (Sweden)

    Tingting Xu

    2017-07-01

    Full Text Available The purpose of this study is to examine the reliability of wireless pedometers in measuring elementary school children’s physical activity. Activity measurement using a wireless pedometer Fitbit ZipTM was compared to activity measurement using Yamax Digi-WalkerTM SW701 for a group of randomly selected 25 children in Grades 3, 4, and 5. Fitbit ZipTM wireless pedometers were found to have an appropriate degree (Nunnally & Bernstein, 1994 of accuracy and reliability compared to the Yamax Digi-WalkerTM SW701 pedometer. The Fitbit ZipTM wireless pedometer collected more step counts than the Yamax Digi-WalkerTM SW701 pedometer; however, the difference was not statistically significant. Participants reported that they preferred wearing the Fitbit ZipTM to the Yamax Digi-WalkerTM SW701 because the Fitbit ZipTM was more comfortable to wear and less likely to fall off. Participants also reported being more motivated to move while wearing the Fitbit ZipTM.

  10. Children's Physical Activity While Gardening: Development of a Valid and Reliable Direct Observation Tool.

    Science.gov (United States)

    Myers, Beth M; Wells, Nancy M

    2015-04-01

    Gardens are a promising intervention to promote physical activity (PA) and foster health. However, because of the unique characteristics of gardening, no extant tool can capture PA, postures, and motions that take place in a garden. The Physical Activity Research and Assessment tool for Garden Observation (PARAGON) was developed to assess children's PA levels, tasks, postures, and motions, associations, and interactions while gardening. PARAGON uses momentary time sampling in which a trained observer watches a focal child for 15 seconds and then records behavior for 15 seconds. Sixty-five children (38 girls, 27 boys) at 4 elementary schools in New York State were observed over 8 days. During the observation, children simultaneously wore Actigraph GT3X+ accelerometers. The overall interrater reliability was 88% agreement, and Ebel was .97. Percent agreement values for activity level (93%), garden tasks (93%), motions (80%), associations (95%), and interactions (91%) also met acceptable criteria. Validity was established by previously validated PA codes and by expected convergent validity with accelerometry. PARAGON is a valid and reliable observation tool for assessing children's PA in the context of gardening.

  11. State of the art of Monte Carlo technics for reliable activated waste evaluations

    International Nuclear Information System (INIS)

    Culioli, Matthieu; Chapoutier, Nicolas; Barbier, Samuel; Janski, Sylvain

    2016-01-01

    This paper presents the calculation scheme used for many studies to assess the activities inventory of French shutdown reactors (including Pressurized Water Reactor, Heavy Water Reactor, Sodium-Cooled Fast Reactor and Natural Uranium Gas Cooled or UNGG). This calculation scheme is based on Monte Carlo calculations (MCNP) and involves advanced technique for source modeling, geometry modeling (with Computer-Aided Design integration), acceleration methods and depletion calculations coupling on 3D meshes. All these techniques offer efficient and reliable evaluations on large scale model with a high level of details reducing the risks of underestimation or conservatisms. (authors)

  12. Validity and Reliability of Field-Based Measures for Assessing Movement Skill Competency in Lifelong Physical Activities: A Systematic Review.

    Science.gov (United States)

    Hulteen, Ryan M; Lander, Natalie J; Morgan, Philip J; Barnett, Lisa M; Robertson, Samuel J; Lubans, David R

    2015-10-01

    It has been suggested that young people should develop competence in a variety of 'lifelong physical activities' to ensure that they can be active across the lifespan. The primary aim of this systematic review is to report the methodological properties, validity, reliability, and test duration of field-based measures that assess movement skill competency in lifelong physical activities. A secondary aim was to clearly define those characteristics unique to lifelong physical activities. A search of four electronic databases (Scopus, SPORTDiscus, ProQuest, and PubMed) was conducted between June 2014 and April 2015 with no date restrictions. Studies addressing the validity and/or reliability of lifelong physical activity tests were reviewed. Included articles were required to assess lifelong physical activities using process-oriented measures, as well as report either one type of validity or reliability. Assessment criteria for methodological quality were adapted from a checklist used in a previous review of sport skill outcome assessments. Movement skill assessments for eight different lifelong physical activities (badminton, cycling, dance, golf, racquetball, resistance training, swimming, and tennis) in 17 studies were identified for inclusion. Methodological quality, validity, reliability, and test duration (time to assess a single participant), for each article were assessed. Moderate to excellent reliability results were found in 16 of 17 studies, with 71% reporting inter-rater reliability and 41% reporting intra-rater reliability. Only four studies in this review reported test-retest reliability. Ten studies reported validity results; content validity was cited in 41% of these studies. Construct validity was reported in 24% of studies, while criterion validity was only reported in 12% of studies. Numerous assessments for lifelong physical activities may exist, yet only assessments for eight lifelong physical activities were included in this review

  13. The Bahasa Melayu version of the Global Physical Activity Questionnaire: reliability and validity study in Malaysia.

    Science.gov (United States)

    Soo, K L; Wan Abdul Manan, W M; Wan Suriati, W N

    2015-03-01

    This study aimed to assess the reliability and concurrent validity of the Bahasa Melayu version of the Global Physical Activity Questionnaire (GPAQ-M) by comparing it with the short form of the International Physical Activity Questionnaire (IPAQ-S) and objectively measuring physical activity using a Yamax DigiWalker (Yamax, Tokyo, Japan) pedometer. A total of 100 adults aged between 20 and 58 years from Kelantan in Malaysia voluntarily participated in this study. The Wilcoxon signed-rank analysis showed no significant differences in 2-week test-retest scores for total metabolic equivalent∙minutes∙per week and 4 domains of the GPAQ-M. There was a low but significant relationship between time spent on total physical activity measured by the GPAQ-M and average steps per day recorded using the pedometer (r s = .265, P = .013). Significant correlations were also found between GPAQ-M and the IPAQ-S for varying levels of intensity during physical activities (r s = .309-.466, P < .01). © 2012 APJPH.

  14. 48 CFR 212.504 - Applicability of certain laws to subcontracts for the acquisition of commercial items.

    Science.gov (United States)

    2010-10-01

    ... laws to subcontracts for the acquisition of commercial items. 212.504 Section 212.504 Federal... PLANNING ACQUISITION OF COMMERCIAL ITEMS Applicability of Certain Laws to the Acquisition of Commercial Items 212.504 Applicability of certain laws to subcontracts for the acquisition of commercial items. (a...

  15. 48 CFR 12.504 - Applicability of certain laws to subcontracts for the acquisition of commercial items.

    Science.gov (United States)

    2010-10-01

    ... laws to subcontracts for the acquisition of commercial items. 12.504 Section 12.504 Federal Acquisition... Applicability of Certain Laws to the Acquisition of Commercial Items and Commercially Available Off-The-Shelf Items 12.504 Applicability of certain laws to subcontracts for the acquisition of commercial items. (a...

  16. 75 FR 34260 - Federal Acquisition Regulation; FAR Case 2005-040, Electronic Subcontracting Reporting System (eSRS)

    Science.gov (United States)

    2010-06-16

    ... plan. Failure to submit or late submission of reports shall be a breach of contract and will be...)(2) of FAR clause 52.219-9 already addresses the breach of contract issue when the contractor or... Form 294 - Subcontract Report for Individual Contracts and Standard Form 295 - Summary Subcontract...

  17. Photovoltaic Subcontract Program, FY 1991. Annual report, [October 1, 1990--September 30, 1991

    Energy Technology Data Exchange (ETDEWEB)

    1992-03-01

    This report summarizes the fiscal year (FY) 1991 (October 1, 1990, through September 30, 1991) progress of the subcontracted photovoltaic (PV) research and development (R&D) performed under the Photovoltaic Advanced Research and Development Project at the National Renewable Energy Laboratory (NREL) -- formerly the Solar Energy Research Institute (SERI). The mission of the national PV program is to develop PV technology for large-scale generation of economically competitive electric power in the United States. The technical sections of the report cover the main areas of the subcontract program: the Amorphous Silicon Research Project, Polycrystalline Thin Films, Crystalline Silicon Materials Research, High-Efficiency Concepts, the New Ideas Program, the University Participation Program, and the Photovoltaic Manufacturing Technology (PVMaT) project. Technical summaries of each of the subcontracted programs provide a discussion of approaches, major accomplishments in FY 1991, and future research directions.

  18. Validity and reliability of International Physical Activity Questionnaire-Short Form in Chinese youth.

    Science.gov (United States)

    Wang, Chao; Chen, Peijie; Zhuang, Jie

    2013-12-01

    The psychometric profiles of the widely used International Physical Activity Questionnaire-Short Form (IPAQ-SF) in Chinese youth have not been reported. The purpose of this study was to examine the validity and reliability of the IPAQ-SF using a sample of Chinese youth. One thousand and twenty-one youth (M(age) = 14.26 +/- 1.63 years, 52.8% boys) from 11 cities in China wore accelerometers for 7 consecutive days and completed the IPAQ-SF on the 8th day to recall their physical activity (PA) during accelerometer-wearing days. A subsample of 92 youth (M(age) = 15.90 +/- 1.35 years, 46.7% boys) completed the IPAQ-SF again a week later to recall their PA during accelerometer-wearing days. Differences in PA estimated by the IPAQ-SF and accelerometer were examined by paired-sample t test. Spearman correlation coefficients were used to examine the correlation between the IPAQ-SF and accelerometer. Test-retest reliability of the IPAQ-SF was determined by the intraclass correlation coefficient (ICC). Compared with accelerometer, the IPAQ-SF overestimated sedentary time, moderate PA (MPA), vigorous PA (VPA), and moderate-to-vigorous PA (MVPA). Correlations between PA (total PA, MPA, VPA, and MVPA) and sedentary time measured by 2 instruments ranged from "none" to "low" (p = .08-.31). Test-retest ICC of the IPAQ-SF ranged from "moderate" to "high" (ICC = .43-.83), except for sitting in boys (ICC = .06), sitting for the whole sample (ICC = .32), and VPA in girls (ICC = .35). The IPAQ-SF was not a valid instrument for measuring PA and sedentary behavior in Chinese youth.

  19. Reliability and Validity of the Activity Participation Assessment for School-age Children in Korea

    Directory of Open Access Journals (Sweden)

    Se-Yun Kim

    2016-12-01

    Conclusion: The APA shows good internal reliability, test–retest reliability, discriminant validity, and construct validity. However, evidence of psychometric properties was limited by a small sample size. Psychometric properties such as interrater reliability as well as concurrent validity and construct validity need to be tested using a larger sample size with representative demographics.

  20. Reliability of a Novel Social Activity Questionnaire: Perceived Social Support and Verbal Interaction in the Wisconsin Registry for Alzheimer's Prevention.

    Science.gov (United States)

    Zuelsdorff, Megan L; Koscik, Rebecca L; Okonkwo, Ozioma C; Peppard, Paul E; Hermann, Bruce P; Sager, Mark A; Johnson, Sterling C; Engelman, Corinne D

    2018-02-01

    Social activity is associated with healthy aging and preserved cognition. Such activity includes a confluence of social support and verbal interaction, each influencing cognition through rarely parsed, mechanistically distinct pathways. We created a novel verbal interaction measure for the Wisconsin Registry for Alzheimer's Prevention (WRAP) and assessed reliability of resultant data, a first step toward mechanism-driven examination of social activity as a modifiable predictor of cognitive health. Two WRAP subsamples completed a test-retest study to determine 8-week stability ( n = 107) and 2-year stability ( n = 136) of verbal interaction, and 2-year stability of perceived social support. Reliability was determined using quadratic-weighted kappa, percent agreement, or correlation coefficients. Reliability was fair to almost perfect. The association between social support and interaction quantity decreased with age. Social activity data demonstrate moderate to excellent temporal stability. Moreover, in older individuals, social support and verbal interaction represent two distinct dimensions of social activity.

  1. The Turkish version of the Physical Activity Scale for the Elderly (PASE): its cultural adaptation, validation, and reliability.

    Science.gov (United States)

    Ayvat, Ender; Kilinç, Muhammed; Kirdi, Nuray

    2017-06-12

    This study aimed to describe the cultural adaptation of the Turkish Physical Activity Scale for the Elderly (PASE) and to examine the reliability and validity of the scale in older Turkish adults. Eighty elderly people were recruited for the study. The assessments included the PASE, the International Physical Activity Questionnaire (IPAQ), the Short Physical Performance Battery and Short Form-36 Quality of Life Questionnaire (SF-36), and the Mini Mental State Test. Outcome measures were conducted twice within a week (test-retest) for reliability. Cronbach's α coefficient was 0.714 for the initial evaluation. The intraclass correlation coefficient for the test-retest reliability was 0.995 with a 95% confidence interval of 0.993-0.997. A high level of positive correlation (0.742, P reliable and valid scale for the fields of research and practice.

  2. [Physical activity patterns of school adolescents: Validity, reliability and percentiles proposal for their evaluation].

    Science.gov (United States)

    Cossío Bolaños, Marco; Méndez Cornejo, Jorge; Luarte Rocha, Cristian; Vargas Vitoria, Rodrigo; Canqui Flores, Bernabé; Gomez Campos, Rossana

    2017-02-01

    Regular physical activity (PA) during childhood and adolescence is important for the prevention of non-communicable diseases and their risk factors. To validate a questionnaire for measuring patterns of PA, verify the reliability, comparing the levels of PA aligned with chronological and biological age, and to develop percentile curves to assess PA levels depending on biological maturation. Descriptive cross-sectional study was performed on a sample non-probabilistic quota of 3,176 Chilean adolescents (1685 males and 1491 females), with a mean age range from 10.0 to 18.9 years. An analysis was performed on, weight, standing and sitting height. The biological age through the years of peak growth rate and chronological age in years was determined. Body Mass Index was calculated and a survey of PA was applied. The LMS method was used to develop percentiles. The values for the confirmatory analysis showed saturations between 0.517 and 0.653. The value of adequacy of Kaiser-Meyer-Olkin (KMO) was 0.879 and with 70.8% of the variance explained. The Cronbach alpha values ranged from 0.81 to 0.86. There were differences between the genders when aligned chronological age. There were no differences when aligned by biological age. Percentiles are proposed to classify the PA of adolescents of both genders according to biological age and sex. The questionnaire used was valid and reliable, plus the PA should be evaluated by biological age. These findings led to the development of percentiles to assess PA according to biological age and gender.

  3. The Physical Activity Scale for Individuals with Physical Disabilities: test-retest reliability and comparison with an accelerometer.

    Science.gov (United States)

    van der Ploeg, Hidde P; Streppel, Kitty R M; van der Beek, Allard J; van der Woude, Luc H V; Vollenbroek-Hutten, Miriam; van Mechelen, Willem

    2007-01-01

    The objective was to determine the test-retest reliability and criterion validity of the Physical Activity Scale for Individuals with Physical Disabilities (PASIPD). Forty-five non-wheelchair dependent subjects were recruited from three Dutch rehabilitation centers. Subjects' diagnoses were: stroke, spinal cord injury, whiplash, and neurological-, orthopedic- or back disorders. The PASIPD is a 7-d recall physical activity questionnaire that was completed twice, 1 wk apart. During this week, physical activity was also measured with an Actigraph accelerometer. The test-retest reliability Spearman correlation of the PASIPD was 0.77. The criterion validity Spearman correlation was 0.30 when compared to the accelerometer. The PASIPD had test-retest reliability and criterion validity that is comparable to well established self-report physical activity questionnaires from the general population.

  4. Assessing the reliability of predictive activity coefficient models for molecules consisting of several functional groups

    Directory of Open Access Journals (Sweden)

    R. P. Gerber

    2013-03-01

    Full Text Available Currently, the most successful predictive models for activity coefficients are those based on functional groups such as UNIFAC. In contrast, these models require a large amount of experimental data for the determination of their parameter matrix. A more recent alternative is the models based on COSMO, for which only a small set of universal parameters must be calibrated. In this work, a recalibrated COSMO-SAC model was compared with the UNIFAC (Do model employing experimental infinite dilution activity coefficient data for 2236 non-hydrogen-bonding binary mixtures at different temperatures. As expected, UNIFAC (Do presented better overall performance, with a mean absolute error of 0.12 ln-units against 0.22 for our COSMO-SAC implementation. However, in cases involving molecules with several functional groups or when functional groups appear in an unusual way, the deviation for UNIFAC was 0.44 as opposed to 0.20 for COSMO-SAC. These results show that COSMO-SAC provides more reliable predictions for multi-functional or more complex molecules, reaffirming its future prospects.

  5. Manufacturing of reliable actively cooled fusion components - a challenge for non-destructive inspections

    International Nuclear Information System (INIS)

    Reheis, N.; Zabernig, A.; Ploechl, L.

    1994-01-01

    Actively cooled in-vessel components like divertors or limiters require high quality and reliability to ensure safe operation during long term use. Such components are subjected to very severe thermal and mechanical cyclic loads and high power densities. Key requirements for materials in question are e.g. high melting point and thermal conductivity and low atomic mass number. Since no single material can simultaneously meet all of these requirements the selection of materials to be combined in composite components as well as of manufacturing and non-destructive inspection (NDI) methods is a particularly challenging task. Armour materials like graphite intended to face the plasma and help to maintain its desired properties, are bonded to metallic substrates like copper, molybdenum or stainless steel providing cooling and mechanical support. Several techniques such as brazing and active metal casting have been developed and successfully applied for joining materials with different thermophysical properties, pursuing the objective of sufficient heat dissipation from the hot, plasma facing surface to the coolant. NDI methods are an integral part of the manufacturing schedule of these components, starting in the design phase and ending in the final inspection. They apply all kinds of divertor types (monobloc and flat-tile concept). Particular focus is put on the feasibility of detecting small flaws and defects in complex interfaces and on the limits of these techniques. Special test pieces with defined defects acting as standards were inspected. Accompanying metallographic investigations were carried out to compare actual defects with results recorded during NDI

  6. Reliability engineering

    International Nuclear Information System (INIS)

    Lee, Chi Woo; Kim, Sun Jin; Lee, Seung Woo; Jeong, Sang Yeong

    1993-08-01

    This book start what is reliability? such as origin of reliability problems, definition of reliability and reliability and use of reliability. It also deals with probability and calculation of reliability, reliability function and failure rate, probability distribution of reliability, assumption of MTBF, process of probability distribution, down time, maintainability and availability, break down maintenance and preventive maintenance design of reliability, design of reliability for prediction and statistics, reliability test, reliability data and design and management of reliability.

  7. A Community Based Study to Test the Reliability and Validity of Physical Activity Measurement Techniques

    Directory of Open Access Journals (Sweden)

    Puneet Misra

    2014-01-01

    Full Text Available Introduction: Physical activity (PA is protective against non-communicable diseases and it can reduce premature mortality. However, it is difficult to assess the frequency, duration, type and intensity of PA. The global physical activity questionnaire (GPAQ has been developed by World Health Organization with the aim of having valid and reliable estimates of PA. The primary aim of this study is to assess the repeatability of the GPAQ instrument and the secondary aim is to validate it against International Physical Activity Questionnaire (IPAQ and against an objective measure of PA (i.e., using pedometers in both rural and peri-urban areas of North India. Methods: A total of 262 subjects were recruited by random selection from Ballabgarh Block of Haryana State in India. For test retest repeatability of GPAQ and IPAQ, the instruments were administered on two occasions separated by at least 3 days. For concurrent validity, both questionnaires were administered in random order and for criterion validity step counters were used. Spearman′s correlation coefficient, intra-class correlation (ICC and Cohen′s kappa was used in the analysis. Results: For GPAQ validity, the spearman′s Rho ranged from 0.40 to 0.59 and ICC ranged from 0.43 to 0.81 while for IPAQ validity, spearman correlation coefficient ranged from 0.42 to 0.43 and ICC ranged from 0.56 to 0.68. The observed concurrent validity coefficients suggested that both the questionnaires had reasonable agreement (Spearman Rho of >0.90; P < 0.0001; ICC: 0.76-0.91, P < 0.05. Conclusions: GPAQ is similar to IPAQ in measuring PA and can be used for measurement of PA in community settings.

  8. Subcontracting strategy for the decontamination and decommissioning of Savannah River Site's First Tritium Extraction Facility, 232-F

    International Nuclear Information System (INIS)

    Smith, C.W. Jr.; Dowd, A.S. Jr.; Hinds, S.S.; Johnson, S.V.

    1994-01-01

    The Savannah River Site (SRS) has been actively proceeding with the decontamination and decommissioning (D and D) of various facilities and structures which were instrumental in the success of past missions at the site. The most ambitious of these efforts involves the subcontracting of the complete D and D of the first SRS Tritium Extraction Facility, identified as building 232-F. This facility operated in the mid 1950's and discontinued operations permanently in 1958. The approach utilized for this effort attempts to invoke the novel principle of open-quotes As Commercial As Reasonably Achievableclose quotes or open-quotes ACARAclose quotes. This concept of ACARA applies only the minimum essential requirements necessary to successfully perform the D and D task. Integral to this approach is the subcontractor provision for maximum flexibility in the identification of and adherence to the requirements of applicable DOE Orders, federal, state and local laws and regulations, as well as site specific procedures without violating the site contractual requirements. The technical specification prepared for this effort provides the basis for a competitively bid contract to perform the entire D and D evolution, including initial facility characterization, waste stream characterization and certification, D and D and waste disposal. Preparation and development of this specification and the subsequent Request For Proposal (RFP) was a successful team oriented endeavor. The schedule for this fast-track undertaking took three months to complete. Successful initiation of this task will be the first D and D of a facility containing both radioactive and hazardous material at an operating site within the DOE Weapons Complex. The strategy for preparing the D and D subcontract for the 232-F structure was facilitated by applying the ACARA principle. This approach resulted in the accelerated development of the specification and RFP documents, as well as minimized the complexities of

  9. 48 CFR 52.219-16 - Liquidated Damages-Subcontracting Plan.

    Science.gov (United States)

    2010-10-01

    ... following clause: Liquidated Damages—Subcontracting Plan (JAN 1999) (a) Failure to make a good faith effort... has failed to make such good faith effort, the Contracting Officer shall give the Contractor written notice specifying the failure and permitting the Contractor to demonstrate what good faith efforts have...

  10. 48 CFR 252.219-7004 - Small business subcontracting plan (test program).

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 3 2010-10-01 2010-10-01 false Small business... AND CONTRACT CLAUSES Text of Provisions And Clauses 252.219-7004 Small business subcontracting plan (test program). As prescribed in 219.708(b)(1)(B), use the following clause: Small Business...

  11. 48 CFR 252.219-7003 - Small business subcontracting plan (DoD contracts).

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 3 2010-10-01 2010-10-01 false Small business... AND CONTRACT CLAUSES Text of Provisions And Clauses 252.219-7003 Small business subcontracting plan (DoD contracts). As prescribed in 219.708(b)(1)(A), use the following clause: Small Business...

  12. 75 FR 65439 - Defense Federal Acquisition Regulation Supplement; Electronic Subcontracting Reporting System

    Science.gov (United States)

    2010-10-25

    ... Accounting Service or Missile Defense Agency. (2) For DoD, the authority to acknowledge receipt or reject... DEPARTMENT OF DEFENSE Defense Acquisition Regulations System 48 CFR Parts 219 and 252 [DFARS Case 2009-D002] Defense Federal Acquisition Regulation Supplement; Electronic Subcontracting Reporting...

  13. 48 CFR 226.370-8 - Goals and incentives for subcontracting with HBCU/MIs.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 3 2010-10-01 2010-10-01 false Goals and incentives for subcontracting with HBCU/MIs. 226.370-8 Section 226.370-8 Federal Acquisition Regulations System DEFENSE ACQUISITION REGULATIONS SYSTEM, DEPARTMENT OF DEFENSE SOCIOECONOMIC PROGRAMS OTHER SOCIOECONOMIC PROGRAMS Historically Black Colleges and...

  14. Reliability and validity of two multidimensional self-reported physical activity questionnaires in people with chronic low back pain.

    Science.gov (United States)

    Carvalho, Flávia A; Morelhão, Priscila K; Franco, Marcia R; Maher, Chris G; Smeets, Rob J E M; Oliveira, Crystian B; Freitas Júnior, Ismael F; Pinto, Rafael Z

    2017-02-01

    Although there is some evidence for reliability and validity of self-report physical activity (PA) questionnaires in the general adult population, it is unclear whether we can assume similar measurement properties in people with chronic low back pain (LBP). To determine the test-retest reliability of the International Physical Activity Questionnaire (IPAQ) long-version and the Baecke Physical Activity Questionnaire (BPAQ) and their criterion-related validity against data derived from accelerometers in patients with chronic LBP. Cross-sectional study. Patients with non-specific chronic LBP were recruited. Each participant attended the clinic twice (one week interval) and completed self-report PA. Accelerometer measures >7 days included time spent in moderate-and-vigorous physical activity, steps/day, counts/minute, and vector magnitude counts/minute. Intraclass Correlation Coefficients (ICC) and Bland and Altman method were used to determine reliability and spearman rho correlation were used for criterion-related validity. A total of 73 patients were included in our analyses. The reliability analyses revealed that the BPAQ and its subscales have moderate to excellent reliability (ICC 2,1 : 0.61 to 0.81), whereas IPAQ and most IPAQ domains (except walking) showed poor reliability (ICC 2,1 : 0.20 to 0.40). The Bland and Altman method revealed larger discrepancies for the IPAQ. For the validity analysis, questionnaire and accelerometer measures showed at best fair correlation (rho reliability than the IPAQ long-version, both questionnaires did not demonstrate acceptable validity against accelerometer data. These findings suggest that questionnaire and accelerometer PA measures should not be used interchangeably in this population. Copyright © 2016 Elsevier Ltd. All rights reserved.

  15. Some infant ventilators do not limit peak inspiratory pressure reliably during active expiration.

    Science.gov (United States)

    Kirpalani, H; Santos-Lyn, R; Roberts, R

    1988-09-01

    In order to minimize barotrauma in newborn infants with respiratory failure, peak inspiratory pressures should not exceed those required for adequate gas exchange. We examined whether four commonly used pressure-limited, constant flow ventilators limit pressure reliably during simulated active expiration against the inspiratory stroke of the ventilator. Three machines of each type were tested at 13 different expiratory flow rates (2 to 14 L/min). Flow-dependent pressure overshoot above a dialed pressure limit of 20 cm H2O was observed in all machines. However, the magnitude differed significantly between ventilators from different manufacturers (p = .0009). Pressure overshoot above 20 cm H2O was consistently lowest in the Healthdyne (0.8 cm H2O at 2 L/min, 3.6 cm H2O at 14 L/min) and highest in the Bourns BP200 (3.0 cm H2O at 2 L/min, 15.4 cm H2O at 14 L/min). We conclude that peak inspiratory pressure overshoots on pressure-limited ventilators occur during asynchronous expiration. This shortcoming may contribute to barotrauma in newborn infants who "fight" positive-pressure ventilation.

  16. Reliability and validity of the multimedia activity recall in children and adults (MARCA) in people with chronic obstructive pulmonary disease.

    Science.gov (United States)

    Hunt, Toby; Williams, Marie T; Olds, Tim S

    2013-01-01

    To determine the reliability and validity of the Multimedia Activity Recall for Children and Adults (MARCA) in people with chronic obstructive pulmonary disease (COPD). People with COPD and their carers completed the Multimedia Activity Recall for Children and Adults (MARCA) for four, 24-hour periods (including test-retest of 2 days) while wearing a triaxial accelerometer (Actigraph GT3X+®), a multi-sensor armband (Sensewear Pro3®) and a pedometer (New Lifestyles 1000®). Self reported activity recalls (MARCA) and objective activity monitoring (Accelerometry) were recorded under free-living conditions. 24 couples were included in the analysis (COPD; age 74.4 ± 7.9 yrs, FEV1 54 ± 13% Carer; age 69.6 ± 10.9 yrs, FEV1 99 ± 24%). Not applicable. Test-retest reliability was compared for MARCA activity domains and different energy expenditure zones. Validity was assessed between MARCA-derived physical activity level (in metabolic equivalent of task (MET) per minute), duration of moderate to vigorous physical activity (min) and related data from the objective measurement devices. Analysis included intra-class correlation coefficients (ICC), Bland-Altman analyses, paired t-tests (p) and Spearman's rank correlation coefficients (rs). Reliability between occasions of recall for all activity domains was uniformly high, with test-retest correlations consistently >0.9. Validity correlations were moderate to strong (rs = 0.43-0.80) across all comparisons. The MARCA yields comparable PAL estimates and slightly higher moderate to vigorous physical activity (MVPA) estimates. In older adults with chronic illness, the MARCA is a valid and reliable tool for capturing not only the time and energy expenditure associated with physical and sedentary activities but also information on the types of activities.

  17. Development, content validity and test-retest reliability of the Lifelong Physical Activity Skills Battery in adolescents.

    Science.gov (United States)

    Hulteen, Ryan M; Barnett, Lisa M; Morgan, Philip J; Robinson, Leah E; Barton, Christian J; Wrotniak, Brian H; Lubans, David R

    2018-03-28

    Numerous skill batteries assess fundamental motor skill (e.g., kick, hop) competence. Few skill batteries examine lifelong physical activity skill competence (e.g., resistance training). This study aimed to develop and assess the content validity, test-retest and inter-rater reliability of the "Lifelong Physical Activity Skills Battery". Development of the skill battery occurred in three stages: i) systematic reviews of lifelong physical activity participation rates and existing motor skill assessment tools, ii) practitioner consultation and iii) research expert consultation. The final battery included eight skills: grapevine, golf swing, jog, push-up, squat, tennis forehand, upward dog and warrior I. Adolescents (28 boys, 29 girls; M = 15.8 years, SD = 0.4 years) completed the Lifelong Physical Activity Skills Battery on two occasions two weeks apart. The skill battery was highly reliable (ICC = 0.84, 95% CI = 0.72-0.90) with individual skill reliability scores ranging from moderate (warrior I; ICC = 0.56) to high (tennis forehand; ICC = 0.82). Typical error (4.0; 95% CI 3.4-5.0) and proportional bias (r = -0.21, p = .323) were low. This study has provided preliminary evidence for the content validity and reliability of the Lifelong Physical Activity Skills Battery in an adolescent population.

  18. [Reliability of the PRISCUS-PAQ. Questionnaire to assess physical activity of persons aged 70 years and older].

    Science.gov (United States)

    Trampisch, U; Platen, P; Burghaus, I; Moschny, A; Wilm, S; Thiem, U; Hinrichs, T

    2010-12-01

    A questionnaire (Q) to measure physical activity (PA) of persons ≥70 years for epidemiological research is lacking. The aim was to develop the PRISCUS-PAQ and test the reliability in community-dwelling people (≥70 years). Validated PA questionnaires were translated and adapted to design the PRISCUS-PAQ. Its test-retest reliability for 91 randomly selected people (36% men) aged 70-98 (76±5) years ranged from 0.47 (walking) to 0.82 (riding a bicycle). The overall activity score was 0.59 as determined by the intraclass correlation coefficient (ICC). Recording of general activities, e.g., housework (ICC=0.59), was in general less reliable than athletic activities, e.g., gymnastics (ICC=0.76). The PRISCUS-PAQ, which is a short instrument with acceptable reliability to collect the physical activity of the elderly in a telephone interview, will be used to collect data in a large cohort of older people in the German research consortium PRISCUS.

  19. Fault tolerant control of a three-phase three-wire shunt active filter system based on reliability analysis

    Energy Technology Data Exchange (ETDEWEB)

    Poure, P. [Laboratoire d' Instrumentation Electronique de Nancy LIEN, EA 3440, Nancy-Universite, Faculte des Sciences et Techniques, BP 239, 54506 Vandoeuvre Cedex (France); Weber, P.; Theilliol, D. [Centre de Recherche en Automatique de Nancy UMR 7039, Nancy-Universite, CNRS, Faculte des Sciences et Techniques, BP 239, 54506 Vandoeuvre Cedex (France); Saadate, S. [Groupe de Recherches en Electrotechnique et Electronique de Nancy UMR 7037, Nancy-Universite, CNRS, Faculte des Sciences et Techniques, BP 239, 54506 Vandoeuvre Cedex (France)

    2009-02-15

    This paper deals with fault tolerant shunt three-phase three-wire active filter topologies for which reliability is very important in industry applications. The determination of the optimal reconfiguration structure among various ones with or without redundant components is discussed based on reliability criteria. First, the reconfiguration of the inverter is detailed and a fast fault diagnosis method for power semi-conductor or driver fault detection and compensation is presented. This method avoids false fault detection due to power semi-conductors switching. The control architecture and algorithm are studied and a fault tolerant control strategy is considered. Simulation results in open and short circuit cases validate the theoretical study. Finally, the reliability of the studied three-phase three-wire filter shunt active topologies is analyzed to determine the optimal one. (author)

  20. Measuring physical activity during pregnancy - Cultural adaptation of the Pregnancy Physical Activity Questionnaire (PPAQ) and assessment of its reliability in Polish conditions.

    Science.gov (United States)

    Krzepota, Justyna; Sadowska, Dorota; Sempolska, Katarzyna; Pelczar, Małgorzata

    2017-12-23

    The assessment of physical activity during pregnancy is crucial in perinatal care and it is an important research topic. Unfortunately, in Poland there is a lack of one commonly accepted questionnaire of physical activity during pregnancy. The aim of this study was to adapt the Pregnancy Physical Activity Questionnaire (PPAQ) to Polish conditions and assess the reliability of its Polish version (PPAQ-PL). The PPAQ was translated from English into Polish and its reliability tested. 64 correctly completed (twice, one week apart) questionnaires were qualified for analysis. Test-retest reliability was assessed using Intraclass Correlation Coefficient (ICC). As a result of the adaptation and psychometric assessment, in the Polish version of the questionnaire the number of questions was reduced from 36 to 35 by removing the question concerning 'mowing lawn while on a riding mower'. The ICC value for total activity was 0.75, which confirms a substantial level of reliability. The ICC values for subscales of intensity ranged from 0.53 (light) - 0.86 (vigorous). For subscales of type, ICC values ranged from 0.59 (transportation) - 0.89 (household/caregiving). The PPAQ-PL can be accepted as a reliable tool for the assessing physical activity of pregnant women in Poland. Information obtained using the questionnaire might be helpful in monitoring health behaviours, preventing obesity, as well as designing and promoting physical activity programmes for pregnant women.

  1. [Intra-rater Reliability for the Questionnaire on Activity Limitations and Participation Restrictions of Children With ADHD].

    Science.gov (United States)

    Salamanca Duque, Luisa Matilde; Naranjo Aristizábal, María Mercedes; Gutiérrez Ríos, Gladys Helena; Prieto, Jaime Bayona

    2014-03-01

    Questionnaires for evaluating activity limitations and participation restrictions in children with ADHD (CLARP-TDAH) has recently been developed in Colombia, based on the suggestions made by the WHO from the International Classification of Functioning, Disability and Health (ICF), allowing clinical evaluation beyond an evaluation of the functionality and functioning of children in their family and school environments. Previous research with the questionnaire proved useful in the multidisciplinary approach of Colombian children with ADHD. This study determines the level of intra-rater reliability for questionnaires CLARP-TDAH Parents and Teachers. The study included a non-random sample of 203 Colombian children attending school and diagnosed with ADHD. Intra-rater reliability and the reproducibility of the results was determined using the Kappa index. The informants were parents and teachers. Kappa values >0.7 were obtained for the intra-rater reliability of the questionnaire domains of CLARP-TDAH Parents, while for CLARP-TDAH Teachers domains these values were >0.8. CLARP-TDAH questionnaires are a tool with a good level of intra-rater reliability, which allows a reliable assessment of activity limitations and participation restrictions in order to determine the level of functioning at home and school. Copyright © 2014 Asociación Colombiana de Psiquiatría. Publicado por Elsevier España. All rights reserved.

  2. The Physical Activity Scale for Individuals with Physical Disabilities : test-retest reliability and comparison with an accelerometer

    NARCIS (Netherlands)

    van der Ploeg, Hidde P; Streppel, Kitty R M; van der Beek, Allard J; van der Woude, Luc H V; Vollenbroek-Hutten, Miriam; van Mechelen, Willem; van der Woude, Lucas

    BACKGROUND: The objective was to determine the test-retest reliability and criterion validity of the Physical Activity Scale for Individuals with Physical Disabilities (PASIPD). METHODS: Forty-five non-wheelchair dependent subjects were recruited from three Dutch rehabilitation centers. Subjects'

  3. Validity and reliability of questionnaires measuring physical activity self-efficacy, enjoyment, social support among Hong Kong Chinese children

    Science.gov (United States)

    Physical activity (PA) correlates have not been extensively studied in Hong Kong children. The aim of this study is to assess the validity and reliability of translated scales to measure PA related self-efficacy, enjoyment and social support in Hong Kong Chinese children. Sample 1 (n=273, aged 8–12 ...

  4. Measuring teacher regulating activities concerning student learning in secondary education classrooms : Reliability and validity of student perceptions

    NARCIS (Netherlands)

    van Beek, J. A.; de Jong, F. P. C. M.; Wubbels, Th.; Minnaert, A. E. M. G.

    2014-01-01

    This article describes the use and validation of the Pedagogical Practices Inventory, which uses student perceptions arranged into five subscales to measure teacher activities concerning the regulation of student learning in secondary education. To determine the reliability and validity of the

  5. The Reliability, Validity, and Feasibility of Physical Activity Measurement in Adults With Traumatic Brain Injury: An Observational Study

    NARCIS (Netherlands)

    Hassett, L.; Moseley, A.; Harmer, A.; van der Ploeg, H.P.

    2015-01-01

    Objective: To determine the reliability and validity of the Physical Activity Scale for Individuals with a Physical Disability (PASIPD) in adults with severe traumatic brain injury (TBI) and estimate the proportion of the sample participants who fail to meet the World Health Organization guidelines

  6. Nutrition and Physical Activity Knowledge Assessment: Development of Questionnaires and Evaluation of Reliability in African American and Latino Children

    Science.gov (United States)

    Roberts, Lindsay S.; Sharma, Sushma; Hudes, Mark L.; Fleming, Sharon E.

    2012-01-01

    Background: African-American and Latino children living in neighborhoods with a low-socioeconomic index are more at risk of obesity-associated metabolic disease than their higher socioeconomic index and/or white peers. Currently, consistent and reliable questionnaires to evaluate nutrition and physical activity knowledge in these children are…

  7. The reliability, validity, and feasibility of physical activity measurement in adults with traumatic brain injury: an observational study.

    Science.gov (United States)

    Hassett, Leanne; Moseley, Anne; Harmer, Alison; van der Ploeg, Hidde P

    2015-01-01

    To determine the reliability and validity of the Physical Activity Scale for Individuals with a Physical Disability (PASIPD) in adults with severe traumatic brain injury (TBI) and estimate the proportion of the sample participants who fail to meet the World Health Organization guidelines for physical activity. A single-center observational study recruited a convenience sample of 30 community-based ambulant adults with severe TBI. Participants completed the PASIPD on 2 occasions, 1 week apart, and wore an accelerometer (ActiGraph GT3X; ActiGraph LLC, Pensacola, Florida) for the 7 days between these 2 assessments. The PASIPD test-retest reliability was substantial (intraclass correlation coefficient = 0.85; 95% confidence interval, 0.70-0.92), and the correlation with the accelerometer ranged from too low to be meaningful (R = 0.09) to moderate (R = 0.57). From device-based measurement of physical activity, 56% of participants failed to meet the World Health Organization physical activity guidelines. The PASIPD is a reliable measure of the type of physical activity people with severe TBI participate in, but it is not a valid measure of the amount of moderate to vigorous physical activity in which they engage. Accelerometers should be used to quantify moderate to vigorous physical activity in people with TBI.

  8. Advances in population surveillance for physical activity and sedentary behavior: reliability and validity of time use surveys.

    Science.gov (United States)

    van der Ploeg, Hidde P; Merom, Dafna; Chau, Josephine Y; Bittman, Michael; Trost, Stewart G; Bauman, Adrian E

    2010-11-15

    Many countries conduct regular national time use surveys, some of which date back as far as the 1960s. Time use surveys potentially provide more detailed and accurate national estimates of the prevalence of sedentary and physical activity behavior than more traditional self-report surveillance systems. In this study, the authors determined the reliability and validity of time use surveys for assessing sedentary and physical activity behavior. In 2006 and 2007, participants (n = 134) were recruited from work sites in the Australian state of New South Wales. Participants completed a 2-day time use diary twice, 7 days apart, and wore an accelerometer. The 2 diaries were compared for test-retest reliability, and comparison with the accelerometer determined concurrent validity. Participants with similar activity patterns during the 2 diary periods showed reliability intraclass correlations of 0.74 and 0.73 for nonoccupational sedentary behavior and moderate/vigorous physical activity, respectively. Comparison of the diary with the accelerometer showed Spearman correlations of 0.57-0.59 and 0.45-0.69 for nonoccupational sedentary behavior and moderate/vigorous physical activity, respectively. Time use surveys appear to be more valid for population surveillance of nonoccupational sedentary behavior and health-enhancing physical activity than more traditional surveillance systems. National time use surveys could be used to retrospectively study nonoccupational sedentary and physical activity behavior over the past 5 decades.

  9. Measuring physical activity during pregnancy – Cultural adaptation of the Pregnancy Physical Activity Questionnaire (PPAQ and assessment of its reliability in Polish conditions

    Directory of Open Access Journals (Sweden)

    Justyna Krzepota

    2017-12-01

    The PPAQ-PL can be accepted as a reliable tool for the assessing physical activity of pregnant women in Poland. Information obtained using the questionnaire might be helpful in monitoring health behaviours, preventing obesity, as well as designing and promoting physical activity programmes for pregnant women.

  10. Uranium Mill Tailings Remedial Action Project (UMTRAP), Slick Rock, Colorado, Revision 1. Bid schedule, special conditions, specifications, and subcontract drawings

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-10-01

    This volume contains: bidding requirements; terms and conditions; specifications for Division 1 -- general requirements; specifications for Division 2 -- sitework; specifications for Divisions 5 -- metals; subcontract drawings, (general, Union Carbide processing site, North Continent processing site, and Burro Canyon disposal site).

  11. 13 CFR 121.410 - What are the size standards for SBA's Section 8(d) Subcontracting Program?

    Science.gov (United States)

    2010-01-01

    ... Size Eligibility Requirements for Government Procurement § 121.410 What are the size standards for SBA... Small Business Act, a concern is small for subcontracts which relate to Government procurements if it...

  12. Uranium Mill Tailings Remedial Action Project (UMTRAP), Slick Rock, Colorado, Revision 1. Bid schedule, special conditions, specifications, and subcontract drawings

    International Nuclear Information System (INIS)

    1995-01-01

    This volume contains: bidding requirements; terms and conditions; specifications for Division 1 -- general requirements; specifications for Division 2 -- sitework; specifications for Divisions 5 -- metals; subcontract drawings, (general, Union Carbide processing site, North Continent processing site, and Burro Canyon disposal site)

  13. Reliability of accelerometer-determined physical activity and sedentary behavior in school-aged children: a 12-country study.

    Science.gov (United States)

    Barreira, T V; Schuna, J M; Tudor-Locke, C; Chaput, J-P; Church, T S; Fogelholm, M; Hu, G; Kuriyan, R; Kurpad, A; Lambert, E V; Maher, C; Maia, J; Matsudo, V; Olds, T; Onywera, V; Sarmiento, O L; Standage, M; Tremblay, M S; Zhao, P; Katzmarzyk, P T

    2015-12-01

    Focused on the accelerometer-determined physical activity and sedentary time metrics in 9-11-year-old children, we sought to determine the following: (i) number of days that are necessary to achieve reliable estimates (G⩾0.8); (ii) proportion of variance attributed to different facets (participants and days) of reliability estimates; and (iii) actual reliability of data as collected in The International Study of Childhood Obesity, Lifestyle and Environment (ISCOLE). The analytical sample consisted of 6025 children (55% girls) from sites in 12 countries. Physical activity and sedentary time metrics measures were assessed for up to 7 consecutive days for 24 h per day with a waist-worn ActiGraph GT3X+. Generalizability theory using R software was used to investigate the objectives i and ii. Intra-class correlation coefficients (ICC) were computed using SAS PROC GLM to inform objective iii. The estimated minimum number of days required to achieve a reliability estimate of G⩾0.8 ranged from 5 to 9 for boys and 3 to 11 for girls for light physical activity (LPA); 5 to 9 and 3 to 10, for moderate-to-vigorous physical activity (MVPA); 5 to 10 and 4 to 10 for total activity counts; and 7 to 11 and 6 to 11 for sedentary time, respectively. For all variables investigated, the 'participant' facet accounted for 30-50% of the variability, whereas the 'days' facet accounted for ⩽5%, and the interaction (P × D) accounted for 50-70% of the variability. The actual reliability for boys in ISCOLE ranged from ICCs of 0.78 to 0.86, 0.73 to 0.85 and 0.72 to 0.86 for LPA, MVPA and total activity counts, respectively, and 0.67 to 0.79 for sedentary time. The corresponding values for girls were 0.80-0.88, 0.70-0.89, 0.74-0.86 and 0.64-0.80. It was rare that only 4 days from all participants would be enough to achieve desirable reliability estimates. However, asking participants to wear the device for 7 days and requiring ⩾4 days of data to include the participant in the analysis

  14. Test-retest reliability of Physical Activity Neighborhood Environment Scale among urban men and women in Nanjing, China.

    Science.gov (United States)

    Zhao, L; Wang, Z; Qin, Z; Leslie, E; He, J; Xiong, Y; Xu, F

    2018-03-01

    The identification of physical-activity-friendly built environment (BE) constructs is highly useful for physical activity promotion and maintenance. The Physical Activity Neighborhood Environment Scale (PANES) was developed for assessing BE correlates. However, PANES reliability has not been investigated among adults in China. A cross-sectional study. With multistage sampling approaches, 1568 urban adults (aged 35-74 years) were recruited for the initial survey on all 17 items of PANES Chinese version (PANES-CHN), with the survey repeated 7 days later for each participant. Intraclass correlation coefficient (ICC) was used to assess the test-retest reliability of PANES-CHN for each item. Totally, 1551 participants completed both surveys (follow-up rate = 98.9%). Among participants (mean age: 54.7 ± 11.1 years), 47.8% were men, 22.1% were elders, and 22.7% had ≥13 years of education. Overall, the PANES-CHN demonstrated at least substantial reliability with ICCs ranging from 0.66 to 0.95 (core items), from 0.75 to 0.95 (recommended items), and from 0.78 to 0.87 (optional items). Similar outcomes were observed when data were analyzed by gender or age groups. The PANES-CHN has excellent test-retest reliability and thus has valuable utility for assessing urban BE attributes among Chinese adults. Copyright © 2017 The Royal Society for Public Health. Published by Elsevier Ltd. All rights reserved.

  15. Reliability-based optimization of an active vibration controller using evolutionary algorithms

    Science.gov (United States)

    Saraygord Afshari, Sajad; Pourtakdoust, Seid H.

    2017-04-01

    Many modern industrialized systems such as aircrafts, rotating turbines, satellite booms, etc. cannot perform their desired tasks accurately if their uninhibited structural vibrations are not controlled properly. Structural health monitoring and online reliability calculations are emerging new means to handle system imposed uncertainties. As stochastic forcing are unavoidable, in most engineering systems, it is often needed to take them into the account for the control design process. In this research, smart material technology is utilized for structural health monitoring and control in order to keep the system in a reliable performance range. In this regard, a reliability-based cost function is assigned for both controller gain optimization as well as sensor placement. The proposed scheme is implemented and verified for a wing section. Comparison of results for the frequency responses is considered to show potential applicability of the presented technique.

  16. Reliability and Validity of a Questionnaire for Physical Activity Assessment in South American Children and Adolescents: The SAYCARE Study.

    Science.gov (United States)

    Nascimento-Ferreira, Marcus Vinícius; De Moraes, Augusto César Ferreira; Toazza-Oliveira, Paulo Vinícius; Forjaz, Claudia L M; Aristizabal, Juan Carlos; Santaliesra-Pasías, Alba M; Lepera, Candela; Nascimento-Junior, Walter Viana; Skapino, Estela; Delgado, Carlos Alberto; Moreno, Luis Alberto; Carvalho, Heráclito Barbosa

    2018-03-01

    The objective of this article is to test the reliability and validity of the new and innovative physical activity (PA) questionnaire. Subsamples from the South American Youth/Child Cardiovascular and Environment Study (SAYCARE) study were included to examine its reliability (children: n = 161; adolescents: n = 177) and validity (children: n = 82; adolescents: n = 60). The questionnaire consists of three dimensions of PA (leisure, active commuting, and school) performed during the last week. To assess its validity, the subjects wore accelerometers for at least 3 days and 8 h/d (at least one weekend day). The reliability was analyzed by correlation coefficients. In addition, Bland-Altman analysis and a multilevel regression were applied to estimate the measurement bias, limits of agreement, and influence of contextual variables. In children, the questionnaire showed consistent reliability (ρ = 0.56) and moderate validity (ρ = 0.46), and the contextual variable variance explained 43.0% with -22.9 min/d bias. In adolescents, the reliability was higher (ρ = 0.76) and the validity was almost excellent (ρ = 0.88), with 66.7% of the variance explained by city level with 16.0 min/d PA bias. The SAYCARE PA questionnaire shows acceptable (in children) to strong (in adolescents) reliability and strong validity in the measurement of PA in the pediatric population from low- to middle-income countries. © 2018 The Obesity Society.

  17. The validity and reliability of a home environment preschool-age physical activity questionnaire (Pre-PAQ

    Directory of Open Access Journals (Sweden)

    Peat Jennifer K

    2011-08-01

    Full Text Available Abstract Background There is a need for valid population level measures of physical activity in young children. The aim of this paper is to report the development, and the reliability and validity, of the Preschool-age Children's Physical Activity Questionnaire (Pre-PAQ which was designed to measure activity of preschool-age children in the home environment in population studies. Methods Pre-PAQ was completed by 103 families, and validated against accelerometry for 67 children (mean age 3.8 years, SD 0.74; males 53%. Pre-PAQ categorizes activity into five progressive levels (stationary no movement, stationary with limb or trunk movement, slow, medium, or fast-paced activity. Pre-PAQ Levels 1-2 (stationary activities were combined for analyses. Accelerometer data were categorized for stationary, sedentary (SED, non-sedentary (non-SED, light (LPA, moderate (MPA and vigorous (VPA physical activity using manufacturer's advice (stationary or the cut-points described by Sirard et al and Reilly et al. Bland-Altman methods were used to assess agreement between the questionnaire and the accelerometer measures for corresponding activity levels. Reliability of the Pre-PAQ over one week was determined using intraclass correlations (ICC or kappa (κ values and percentage of agreement of responses between the two questionnaire administrations. Results Pre-PAQ had good agreement with LPA (mean difference 1.9 mins.day-1 and VPA (mean difference -4.8 mins.day-1, was adequate for stationary activity (mean difference 7.6 mins.day-1 and poor for sedentary activity, whether defined using the cut-points of Sirard et al (mean difference -235.4 mins.day-1 or Reilly et al (mean difference -208.6 mins.day-1 cut-points. Mean difference between the measures for total activity (i.e. Reilly's non-sedentary or Sirard's LMVPA was 20.9 mins.day-1 and 45.2 mins.day-1. The limits of agreement were wide for all categories. The reliability of Pre-PAQ question responses ranged from

  18. The validity and reliability of a home environment preschool-age physical activity questionnaire (Pre-PAQ).

    Science.gov (United States)

    Dwyer, Genevieve M; Hardy, Louise L; Peat, Jennifer K; Baur, Louise A

    2011-08-04

    There is a need for valid population level measures of physical activity in young children. The aim of this paper is to report the development, and the reliability and validity, of the Preschool-age Children's Physical Activity Questionnaire (Pre-PAQ) which was designed to measure activity of preschool-age children in the home environment in population studies. Pre-PAQ was completed by 103 families, and validated against accelerometry for 67 children (mean age 3.8 years, SD 0.74; males 53%). Pre-PAQ categorizes activity into five progressive levels (stationary no movement, stationary with limb or trunk movement, slow, medium, or fast-paced activity). Pre-PAQ Levels 1-2 (stationary activities) were combined for analyses. Accelerometer data were categorized for stationary, sedentary (SED), non-sedentary (non-SED), light (LPA), moderate (MPA) and vigorous (VPA) physical activity using manufacturer's advice (stationary) or the cut-points described by Sirard et al and Reilly et al. Bland-Altman methods were used to assess agreement between the questionnaire and the accelerometer measures for corresponding activity levels. Reliability of the Pre-PAQ over one week was determined using intraclass correlations (ICC) or kappa (κ) values and percentage of agreement of responses between the two questionnaire administrations. Pre-PAQ had good agreement with LPA (mean difference 1.9 mins.day⁻¹) and VPA (mean difference -4.8 mins.day⁻¹), was adequate for stationary activity (mean difference 7.6 mins.day⁻¹) and poor for sedentary activity, whether defined using the cut-points of Sirard et al (mean difference -235.4 mins.day⁻¹) or Reilly et al (mean difference -208.6 mins.day⁻¹) cut-points. Mean difference between the measures for total activity (i.e. Reilly's non-sedentary or Sirard's LMVPA) was 20.9 mins.day⁻¹ and 45.2 mins.day⁻¹. The limits of agreement were wide for all categories. The reliability of Pre-PAQ question responses ranged from 0.31-1.00 (ICC (2

  19. Human reliability

    International Nuclear Information System (INIS)

    Bubb, H.

    1992-01-01

    This book resulted from the activity of Task Force 4.2 - 'Human Reliability'. This group was established on February 27th, 1986, at the plenary meeting of the Technical Reliability Committee of VDI, within the framework of the joint committee of VDI on industrial systems technology - GIS. It is composed of representatives of industry, representatives of research institutes, of technical control boards and universities, whose job it is to study how man fits into the technical side of the world of work and to optimize this interaction. In a total of 17 sessions, information from the part of ergonomy dealing with human reliability in using technical systems at work was exchanged, and different methods for its evaluation were examined and analyzed. The outcome of this work was systematized and compiled in this book. (orig.) [de

  20. Photovoltaic manufacturing technology (PVMaT). Annual subcontract report, March 31, 1994--June 30, 1995

    Energy Technology Data Exchange (ETDEWEB)

    Holley, W A [Springborn Labs., Inc., Enfield, CT (United States)

    1996-01-01

    This report describes work performed under a subcontract to the National Renewable Energy Laboratory under the Photovoltaic Manufacturing Technology Project. The objectives of this subcontract are to (1) define the problem of yellowing/browning of EVA-based encapsulants; (2) determine probable mechanisms and the role of various parameters such as heat, UV exposure, module construction, EVA interfaces, and EVA thickness, in the browning of EVA-based encapsulants; (3) develop stabilization strategies for various module constructions to protect the encapsulant from degradative failure; (4) conduct laboratory, accelerated outdoor, and field testing of encapsulant, laminated test coupons, and full modules to demonstrate the functional adequacy of the stabilization strategies; and (5) implement these strategies. This report summarizes the accomplishments related to the above goals for the reporting period.

  1. Ankle Accelerometry for Assessing Physical Activity among Adolescent Girls: Threshold Determination, Validity, Reliability, and Feasibility

    Science.gov (United States)

    Hager, Erin R.; Treuth, Margarita S.; Gormely, Candice; Epps, LaShawna; Snitker, Soren; Black, Maureen M.

    2015-01-01

    Purpose: Ankle accelerometry allows for 24-hr data collection and improves data volume/integrity versus hip accelerometry. Using Actical ankle accelerometry, the purpose of this study was to (a) develop sensitive/specific thresholds, (b) examine validity/reliability, (c) compare new thresholds with those of the manufacturer, and (d) examine…

  2. Monte Carlo simulation - a powerful tool to support experimental activities in structure reliability

    International Nuclear Information System (INIS)

    Yuritzinn, T.; Chapuliot, S.; Eid, M.; Masson, R.; Dahl, A.; Moinereau, D.

    2003-01-01

    Monte-Carlo Simulation (MCS) can have different uses in supporting structure reliability investigations and assessments. In this paper we focus our interest on the use of MCS as a numerical tool to support the fitting of the experimental data related to toughness experiments. (authors)

  3. Adaptation, test-retest reliability, and construct validity of the Physical Activity Neighborhood Environment Scale in Nigeria (PANES-N).

    Science.gov (United States)

    Oyeyemi, Adewale L; Sallis, James F; Oyeyemi, Adetoyeje Y; Amin, Mariam M; De Bourdeaudhuij, Ilse; Deforche, Benedicte

    2013-11-01

    This study adapted the Physical Activity Neighborhood Environment Scale (PANES) to the Nigerian context and assessed the test-retest reliability and construct validity of the Nigerian version (PANESN). A multidisciplinary panel of experts adapted the original PANES to reflect the built and social environment of Nigeria. The adapted PANES was subjected to cognitive testing and test retest reliability in a diverse sample of Nigerian adults (N = 132) from different neighborhood types. Intraclass Correlation Coefficients (ICC) was used to assess test-retest reliability, and construct validity was investigated with Analysis of Covariance for differences in environmental attributes between neighborhoods. Four of the 17 items on the original PANES were significantly modified, 3 were removed and 2 new items were incorporated into the final version of adapted PANES-N. Test-retest reliability was substantial to almost perfect (ICC = 0.62-1.00) for all items on the PANES-N, and residents of neighborhoods in the inner city reported higher residential density, land use mix and safety, but lower pedestrian facilities and aesthetics than did residents of government reserved area/new layout neighborhoods. The PANES-N appears promising for assessing environmental perceptions related to physical activity in Nigeria, but further testing is required to assess its applicability across Africa.

  4. Reliability of surface electromyography activity of gluteal and hamstring muscles during sub-maximal and maximal voluntary isometric contractions.

    Science.gov (United States)

    Bussey, Melanie D; Aldabe, Daniela; Adhia, Divya; Mani, Ramakrishnan

    2018-04-01

    Normalizing to a reference signal is essential when analysing and comparing electromyography signals across or within individuals. However, studies have shown that MVC testing may not be as reliable in persons with acute and chronic pain. The purpose of this study was to compare the test-retest reliability of the muscle activity in the biceps femoris and gluteus maximus between a novel sub-MVC and standard MVC protocols. This study utilized a single individual repeated measures design with 12 participants performing multiple trials of both the sub-MVC and MVC tasks on two separate days. The participant position in the prone leg raise task was standardised with an ultrasonic sensor to improve task precession between trials/days. Day-to-day and trial-to-trial reliability of the maximal muscle activity was examined using ICC and SEM. Day-to-day and trial-to-trial reliability of the EMG activity in the BF and GM were high (0.70-0.89) to very high (≥0.90) for both test procedures. %SEM was <5-10% for both tests on a given day but higher in the day-to-day comparisons. The lower amplitude of the sub-MVC is a likely contributor to increased %SEM (8-13%) in the day-to-day comparison. The findings show that the sub-MVC modified prone double leg raise results in GM and BF EMG measures similar in reliability and precision to the standard MVC tasks. Therefore, the modified prone double leg raise may be a useful substitute for traditional MVC testing for normalizing EMG signals of the BF and GM. Copyright © 2017 Elsevier Ltd. All rights reserved.

  5. Poor Government Oversight of Anham and Its Subcontracting Procedures Allowed Questionable Costs To Go Undetected

    Science.gov (United States)

    2011-07-30

    contractor purchasing system review of Anham. Management Comments and Audit Response The Defense Contract Mangement Agency and the U.S. Central... Introduction 1  Background 1  Government Agency Roles and Oversight Responsibilities 4  Objectives 7  Weak Government Oversight Resulted in Significant...Subcontracting Procedures Allowed Questionable Costs To Go Undetected SIGIR 11-022 July 30, 2011 Introduction Since 2003, the United States Government

  6. A solar regenerative thermoelectrochemical converter (RTEC). Executive summary of final subcontract report

    Energy Technology Data Exchange (ETDEWEB)

    Townsend, C.W.; McHardy, J. [Hughes Aircraft Co., El Segundo, CA (United States)

    1992-02-01

    This is an executive summary of a final subcontract report that describes the successful completion of a closed-loop demonstration of a regenerative thermoelectromechanical device using solar heat input for the production of electricity. The full report, which contains a detailed description of the two-year effort, is currently subject to a government secrecy order which precludes public release of the information. Copies of the full report will be made available for general release whenever the secrecy order is lifted.

  7. Security of payment in Malaysian construction industry: issues on sub-contract's direct payment

    OpenAIRE

    Supardi, Azizan; Adnan, Hamimah

    2011-01-01

    In Malaysia, sub-contractors have to bear with the current structure of payment mechanisms in the standard forms of contract, which are payment upon certification, direct payment from the employer, and contingent or conditional payment. However, „direct payment‟ provision is applied for in most of the nominated sub-contracts and not to the domestic sub-contractors; thus the Construction Industry Payment and Adjudication (CIPA) Act is proposed. This paper, though, is to disclose the findings o...

  8. The Short International Physical Activity Questionnaire: cross-cultural adaptation, validation and reliability of the Hausa language version in Nigeria.

    Science.gov (United States)

    Oyeyemi, Adewale L; Oyeyemi, Adetoyeje Y; Adegoke, Babatunde O; Oyetoke, Fatima O; Aliyu, Habeeb N; Aliyu, Salamatu U; Rufai, Adamu A

    2011-11-22

    Accurate assessment of physical activity is important in determining the risk for chronic diseases such as cardiovascular disease, stroke, type 2 diabetes, cancer and obesity. The absence of culturally relevant measures in indigenous languages could pose challenges to epidemiological studies on physical activity in developing countries. The purpose of this study was to translate and cross-culturally adapt the Short International Physical Activity Questionnaire (IPAQ-SF) to the Hausa language, and to evaluate the validity and reliability of the Hausa version of IPAQ-SF in Nigeria. The English IPAQ-SF was translated into the Hausa language, synthesized, back translated, and subsequently subjected to expert committee review and pre-testing. The final product (Hausa IPAQ-SF) was tested in a cross-sectional study for concurrent (correlation with the English version) and construct validity, and test-retest reliability in a sample of 102 apparently healthy adults. The Hausa IPAQ-SF has good concurrent validity with Spearman correlation coefficients (ρ) ranging from 0.78 for vigorous activity (Min Week-1) to 0.92 for total physical activity (Metabolic Equivalent of Task [MET]-Min Week-1), but poor construct validity, with cardiorespiratory fitness (ρ = 0.21, p = 0.01) and body mass index (ρ = 0.22, p = 0.04) significantly correlated with only moderate activity and sitting time (Min Week-1), respectively. Reliability was good for vigorous (ICC = 0.73, 95% C.I = 0.55-0.84) and total physical activity (ICC = 0.61, 95% C.I = 0.47-0.72), but fair for moderate activity (ICC = 0.33, 95% C.I = 0.12-0.51), and few meaningful differences were found in the gender and socioeconomic status specific analyses. The Hausa IPAQ-SF has acceptable concurrent validity and test-retest reliability for vigorous-intensity activity, walking, sitting and total physical activity, but demonstrated only fair construct validity for moderate and sitting activities. The Hausa IPAQ-SF can be used for

  9. Final Report on the Audit of Subcontract Prices on Firm-Fixed-Price Contracts Awarded to McDonnell Aircraft Company

    Science.gov (United States)

    1990-12-03

    This is our final report on the audit of Subcontract Prices on Firm-Fixed-Price Contracts Awarded to McDonnell Aircraft Company (MCAIR). The Contract Management Directorate made the audit from October 1989 through June 1990. The objective of the audit was to compare proposed and negotiated subcontract prices and determine reasons for significant variances. We also evaluated applicable internal control procedures. For a 6-month period ending December 1989, MCAIR issued 517 subcontracts valued at $679 million.

  10. Validation and reliability of the Baecke questionnaire for the evaluation of habitual physical activity in adult men

    Directory of Open Access Journals (Sweden)

    Alex Antonio Florindo

    2003-06-01

    Full Text Available The aim of this study was to verify validity and reliability of the scores for physical exercise in leisure (PEL, leisure and locomotion activities (LLA, and total score (TS of the Baecke habitual physical activity questionnaire in adult males. Twenty-one students of Physical Education were evaluated. For validation, the maximum oxygen uptake (O2max and the decrease of the heart rate in percentile (%DHR were measured through the Cooper's 12-minute walk or run test, and an annual index of physical exercise (IPE, and a week index of locomotion activities (ILA. The reliability was verified through test-retest with interval of 45 days. The Pearson correlation coefficient, and partial correlation adjusted for age and body mass index were used for validation. The intraclass correlation and paired t-test were used for reliability. The results indicated that %DHR was correlated with LLA and TS (r = 0.47 and p = 0.030; r = 0.48 and p = 0.027, respectively. IPE was correlated with PEL and TS (r = 0.56 and p = 0.008; r = 0.46 and p = 0.036, respectively. ILA was correlated with LLA and TS (r = 0.64 and p = 0.002 and r = 0.51 and p = 0.017, respectively. There was no significant difference in PEL, LLA and TS means in test-retest. The intraclass correlations were r = 0.69; r = 0.80 and r = 0.77, respectively for PEL, LLA and TS. In conclusion, the Baecke questionnaire is valid and reliable to measure habitual physical activity in Brazilian adult men.

  11. Measuring the validity and reliability of the Apple Watch as a physical activity monitor.

    Science.gov (United States)

    Zhang, Peng; Godin, Steven D; Owens, Matthew V

    2018-04-04

    This study aimed to investigate the validity and reliability of the energy expenditure (EE) estimation of Apple Watch among college students. Thirty college students completed two sets of three 10-minute treadmill walking and running trials while wearing three Apple Watches and being connected to indirect calorimetry. The walking trials were at speeds of 54, 80, and 107 m•min-1 while the running trials were at 134, 161, 188m•min-1. Energy expenditure comparisons were made using Two-way ANOVA with repeatedmeasures. Reliability was analyzed by Intraclass Correlation. There was no significant device x speed interactions (F (15, 696) = 1.113, p = 0.341) between the indirect calorimetry (criterion) and Apple Watch. The lowest Inter-Class Correlation (ICC) scores were 0.49 (95%CI) at 54 while the highest were 0.72 (95%CI) at 107 and 134 m•min-1. Apple Watch demonstrated a low to moderate validity and reliability on measuring EE.

  12. Hybrid time-variant reliability estimation for active control structures under aleatory and epistemic uncertainties

    Science.gov (United States)

    Wang, Lei; Xiong, Chuang; Wang, Xiaojun; Li, Yunlong; Xu, Menghui

    2018-04-01

    Considering that multi-source uncertainties from inherent nature as well as the external environment are unavoidable and severely affect the controller performance, the dynamic safety assessment with high confidence is of great significance for scientists and engineers. In view of this, the uncertainty quantification analysis and time-variant reliability estimation corresponding to the closed-loop control problems are conducted in this study under a mixture of random, interval, and convex uncertainties. By combining the state-space transformation and the natural set expansion, the boundary laws of controlled response histories are first confirmed with specific implementation of random items. For nonlinear cases, the collocation set methodology and fourth Rounge-Kutta algorithm are introduced as well. Enlightened by the first-passage model in random process theory as well as by the static probabilistic reliability ideas, a new definition of the hybrid time-variant reliability measurement is provided for the vibration control systems and the related solution details are further expounded. Two engineering examples are eventually presented to demonstrate the validity and applicability of the methodology developed.

  13. Reliability, validity, and responsiveness of the Persian version of Shoulder Activity Scale in a group of patients with shoulder disorders.

    Science.gov (United States)

    Negahban, Hossein; Mohtasebi, Elham; Goharpey, Shahin

    2015-01-01

    The aim of this methodological study was to cross-culturally translate the Shoulder Activity Scale (SAS) into the Persian and determine its clinimetric properties including reliability, validity, and responsiveness in patients with shoulder disorders. Persian version of the SAS was obtained after standard forward-backward translation. Three questionnaires were completed by the respondents: SAS, shoulder pain and disability index (SPADI), and Short-Form 36 Health Survey (SF-36). The patients completed the SAS, 1 week after the first visit to evaluate the test-retest reliability. Construct validity was evaluated by examining the associations between the scores on the SAS and the scores obtained from the SPADI, SF-36, and age of the patients. To assess responsiveness, data were collected in the first visit and then again after 4 weeks physiotherapy intervention. Test-retest reliability and internal consistency were assessed using Intra-class Correlation Coefficient (ICC) and Cronbach's alpha, respectively. To evaluate construct validity, Spearman's rank correlation was used. The ability of the SAS to detect changes was evaluated by the receiver-operating characteristics method. No problem or language difficulties were reported during translation process. Test-retest reliability of the SAS was excellent with an ICC of 0.98. Also, the marginal Cronbach's alpha level of 0.64 was obtained. The correlation between the SAS and the SPADI was low, proving divergent validity, whereas the correlations between the SAS and the SF-36/age were moderate proving convergent validity. A marginally acceptable responsiveness was achieved for the Persian SAS. The study provides some evidences to support the test-retest reliability, internal consistency, construct validity, and responsiveness of the Persian version of the SAS in patients with shoulder disorders. Therefore, it seems that this instrument is a useful measure of shoulder activity level in research setting and clinical practice

  14. Inter-day Reliability of the IDEEA Activity Monitor for Measuring Movement and Non-Movement Behaviors in Older Adults.

    Science.gov (United States)

    de la Cámara, Miguel Ángel; Higueras-Fresnillo, Sara; Martinez-Gomez, David; Veiga, Oscar L

    2018-05-29

    The inter-day reliability of the Intelligent Device for Energy Expenditure and Activity (IDEEA) has not been studied to date. The study purpose was to examine the inter-day variability and reliability on two consecutive days collected with the IDEEA, as well as to predict the number of days needed to provide a reliable estimate of several movement (walking and climbing stairs) and non-movement behaviors (lying, reclining, sitting) and standing in older adults. The sample included 126 older adults (74 women) who wore the IDEEA for 48-h. Results showed low variability between the two days and its reliability was from moderate (ICC=0.34) to high (ICC=0.80) in most of movement and non-movement behaviors analyzed. The Bland-Altman plots showed a high-moderate agreement between days and the Spearman-Brown formula estimated ranged from 1.2 and 9.1 days of monitoring with the IDEEA are needed to achieve ICCs≥0.70 in older adults for sitting and climbing stairs, respectively.

  15. Reliability Engineering

    International Nuclear Information System (INIS)

    Lee, Sang Yong

    1992-07-01

    This book is about reliability engineering, which describes definition and importance of reliability, development of reliability engineering, failure rate and failure probability density function about types of it, CFR and index distribution, IFR and normal distribution and Weibull distribution, maintainability and movability, reliability test and reliability assumption in index distribution type, normal distribution type and Weibull distribution type, reliability sampling test, reliability of system, design of reliability and functionality failure analysis by FTA.

  16. A Scale to Assess Science Activity Videos (SASAV): The Study of Validity and Reliability

    Science.gov (United States)

    Kara, Yilmaz; Bakirci, Hasan

    2018-01-01

    The purpose of the study was to develop an assessment scale for science activity videos that can be used to determine qualified science activity videos that can fulfill the objectives of activity based science education, help teachers to evaluate any science activity videos and decide whether to include into science learning process. The subjects…

  17. [Development of social activities-related daily life satisfaction scale for the elderly and evaluation of its reliability and validity].

    Science.gov (United States)

    Okamoto, Hideaki

    2010-07-01

    The purpose of this study was to develop a Social Activities-Related Daily Life Satisfaction Scale specifically applicable to elderly people in communities and to evaluate its reliability and validity. Sixteen items were extracted from an initial pool and assessed for inclusion in the scale by correlation and exploratory factor analyses. To confirm validity, confirmatory factor analysis was conducted and correlation coefficients were calculated. In addition, t-tests were performed in order to generate scores of the subscale related to activity. To prove reliability, Cronbach's coefficient alpha values were calculated. Data for 755 older adults aged 65 to 84 years were obtained from a mail survey in Ichikawa City, Chiba Prefecture. Exploratory factor analyses indicated that four factors, "satisfaction with learning" (four items), "satisfaction with usefulness to others and society" (four items), "satisfaction with health and physical strength" (three items), and "satisfaction with friends" (three items) should be extracted. Confirmatory factor analysis for assessing the 14-item four-factor model showed high goodness of fit indices (GFI = 0.943, AGFI = 0.915, RMSEA = 0.068). Concurrent validity was established by comparing the score of the scale with five external variables (Activity and Daily Life Satisfaction Scale for the Elderly, Life Satisfaction Index K, etc). Student's t-tests revealed that each score of the subscale was positively associated with activity variable. The overall Cronbach's coefficient alpha for the scale was 0.919 and for its four subscales values ranged from 0.814 to 0.887. A Social Activities-Related Daily Life Satisfaction Scale was derived consisting of four subscales, "satisfaction with learning", "satisfaction with usefulness to others and society", "satisfaction with health and physical strength", and "satisfaction with friends". The results of the present study suggested that the Social Activities-Related Daily Life Satisfaction Scale

  18. Method for a reliable activation calculation of core components; Methode zur zuverlaessigen Berechnung von Aktivierungen in Kernbauteilen

    Energy Technology Data Exchange (ETDEWEB)

    Mispagel, T.; Phlippen, P.W.; Rose, J. [Wissenschaftlich-Technische Ingenieurberatung GmbH (WTI), Juelich (Germany)

    2013-07-01

    During nuclear power plant operation components and materials are exposed to the neutron flux from the reactor core and radionuclides are produced. After removal of the fuel elements the radioactivity of these radionuclides in the reactor pressure vessel and the core internals provide more than 99% of the activity of the power plant. For the transport, the interim storage and the final disposal of these radioactive components the radioactive inventories have to be decoded with respect to radiation and nuclides. The declaration of the nuclide and activity inventories requires a reliable calculation of neutron induced activation of reactor components. These activation calculations describe the pile-up of nuclides due to irradiation and due to the decay of nuclides. For an optimum usage of the activity capacities of the repository Konrad it is necessary to have a qualified calculation procedure that keeps the conservatism as low as possible.

  19. The interrater reliability of rating non-exercise activity of inpatients with eating disorders using a visual analogue scale.

    Science.gov (United States)

    Mazloum, A; Johnston, M; Lundrigan, M; Birmingham, C L

    2008-12-01

    Non-exercise activity thermogenesis (NEAT) is the energy expended by body movement, other than sleeping, eating or sports-like activities. The obese have been reported to have a lower NEAT (walking, standing, and fidgeting) than controls. We hypothesize that an elevated NEAT could explain why some patients with anorexia nervosa are resistant to weight gain. To evaluate the interrater reliability of a rating of non-exercise activity of inpatients with eating disorders (ED) using a visual analogue scale (VAS). Health care providers were asked to rate the non-exercise activity of inpatients by marking a VAS. Eight patients were individually rated by 10 clinicians. Results were analyzed using the intraclass correlation coefficient (ICC) and Cohen's multi-rater kappa statistic (kappa). The ICC(3,k) was 0.257 (pexercise activity and physiological measurements should be used.

  20. Active Thermal Control for Reliability Improvement of MOS-gated Power Devices

    DEFF Research Database (Denmark)

    Soldati, Alessandro; Concari, Carlo; Dossena, Fabrizio

    2017-01-01

    reliability and lifetime. These figures can then be improved, which eases the adoption of electrification in markets, such as transportation, where they are still below target values. The proposed ATC method leaves electric load parameters untouched, while acting dynamically on gate parameters, namely voltage...... and resistance. A model-predictive control (MPC) strategy is used to determine the most suitable parameters to use. Simulations of the control scheme are presented first, to predict the potential benefits on temperature swing amplitude, and the consequent improvements in terms of device lifetime are inferred...

  1. Measuring disability: a systematic review of the validity and reliability of the Global Activity Limitations Indicator (GALI).

    Science.gov (United States)

    Van Oyen, Herman; Bogaert, Petronille; Yokota, Renata T C; Berger, Nicolas

    2018-01-01

    GALI or Global Activity Limitation Indicator is a global survey instrument measuring participation restriction. GALI is the measure underlying the European indicator Healthy Life Years (HLY). Gali has a substantial policy use within the EU and its Member States. The objective of current paper is to bring together what is known from published manuscripts on the validity and the reliability of GALI. Following the PRISMA guidelines, two search strategies (PUBMED, Google Scholar) were combined to identify manuscripts published in English with publication date 2000 or beyond. Articles were classified as reliability studies, concurrent or predictive validity studies, in national or international populations. Four cross-sectional studies (of which 2 international) studied how GALI relates to other health measures (concurrent validity). A dose-response effect by GALI severity level on the association with the other health status measures was observed in the national studies. The 2 international studies (SHARE, EHIS) concluded that the odds of reporting participation restriction was higher in subjects with self-reported or observed functional limitations. In SHARE, the size of the Odds Ratio's (ORs) in the different countries was homogeneous, while in EHIS the size of the ORs varied more strongly. For the predictive validity, subjects were followed over time (4 studies of which one international). GALI proved, both in national and international data, to be a consistent predictor of future health outcomes both in terms of mortality and health care expenditure. As predictors of mortality, the two distinct health concepts, self-rated health and GALI, acted independently and complementary of each other. The one reliability study identified reported a sufficient reliability of GALI. GALI as inclusive one question instrument fits all conceptual characteristics specified for a global measure on participation restriction. In none of the studies, included in the review, there was

  2. Reliability and Validity of the Revised Summary of Diabetes Self-Care Activities (SDSCA for Malaysian Children and Adolescents

    Directory of Open Access Journals (Sweden)

    Jalaludin MY

    2012-12-01

    Full Text Available Background: Self-care plays an important role in diabetes management. One of theinstruments used to evaluate self-care in patients with diabetes is the Summary ofDiabetes Self-Care Activities (SDSCA questionnaire. A validated instrument in theMalay language is used to assess self-care practice among children and adolescentswith diabetes in Malaysia.Objective: To translate and evaluate the psychometric properties of the revised versionof the SDSCA questionnaire in the Malay language.Methods: Forward and backward translations were performed. An expert panelreviewed all versions for conceptual and content equivalence. The final versionwas administered to paediatric patients with diabetes between August 2006 andSeptember 2007. Reliability was analysed using Cronbach’s alpha and validity wasassessed using exploratory factor analysis.Results: A total of 117 patients aged 10–18 years were enrolled from nine hospitals.The reliability of overall core items was 0.735 (with item 4 while the reliabilities ofthe four domains were in the range of 0.539–0.838. As core item number 4 wasfound to be problematic and it was subtituted by item 5a (from the expanded SDSCAto suit local dietary education and practice; and the reliabilities of the overall coreitem (0.782 and the four domains (0.620 – 0.838 improved. Factor loadings of allthe items were greater than 0.4, loaded into the original domains, and accounted for73% of the total variance.Conclusion: The Malay translation of the revised English SDSCA is reliable and validas a guide for Malaysian children and adolescents suffering from diabetes.

  3. [Analysis of the reliability and validity of three self-report questionnaires to assess physical activity among Spanish adolescents].

    Science.gov (United States)

    Cancela Carral, José María; Lago Ballesteros, Joaquín; Ayán Pérez, Carlos; Mosquera Morono, María Belén

    2016-01-01

    To analyse the reliability and validity of the Weekly Activity Checklist (WAC), the One Week Recall (OWR), and the Godin-Shephard Leisure Time Exercise Questionnaire (GLTEQ) in Spanish adolescents. A total of 78 adolescents wore a pedometer for one week, filled out the questionnaires at the end of this period and underwent a test to estimate their maximal oxygen consumption (VO2max). The reliability of the questionnaires was determined by means of a factor analysis. Convergent validity was obtained by comparing the questionnaires' scores against the amount of physical activity quantified by the pedometer and the VO2max reported. The questionnaires showed a weak internal consistency (WAC: α=0.59-0.78; OWR: α=0.53-0.73; GLTEQ: α=0.60). Moderate statistically significant correlations were found between the pedometer and the WAC (r=0.69; p questionnaires analysed, the WAC showed the best psychometric performance as it was the only one with respectable convergent validity, while sharing low reliability with the OWR and the GLTEQ. Copyright © 2016 SESPAS. Publicado por Elsevier España, S.L.U. All rights reserved.

  4. Reliability and Validity of the Self- and Interviewer-Administered Versions of the Global Physical Activity Questionnaire (GPAQ)

    Science.gov (United States)

    Chu, Anne H. Y.; Ng, Sheryl H. X.; Koh, David; Müller-Riemenschneider, Falk

    2015-01-01

    Objective The Global Physical Activity Questionnaire (GPAQ) was originally designed to be interviewer-administered by the World Health Organization in assessing physical activity. The main aim of this study was to compare the psychometric properties of a self-administered GPAQ with the original interviewer-administered approach. Additionally, this study explored whether using different accelerometry-based physical activity bout definitions might affect the questionnaire’s validity. Methods A total of 110 participants were recruited and randomly allocated to an interviewer- (n = 56) or a self-administered (n = 54) group for test-retest reliability, of which 108 participants who met the wear time criteria were included in the validity study. Reliability was assessed by administration of questionnaires twice with a one-week interval. Criterion validity was assessed by comparing against seven-day accelerometer measures. Two definitions for accelerometry-data scoring were employed: (1) total-min of activity, and (2) 10-min bout. Results Participants had similar baseline characteristics in both administration groups and no significant difference was found between the two formats in terms of validity (correlations between the GPAQ and accelerometer). For validity, the GPAQ demonstrated fair-to-moderate correlations for moderate-to-vigorous physical activity (MVPA) for self-administration (r s = 0.30) and interviewer-administration (r s = 0.46). Findings were similar when considering 10-min activity bouts in the accelerometer analysis for MVPA (r s = 0.29 vs. 0.42 for self vs. interviewer). Within each mode of administration, the strongest correlations were observed for vigorous-intensity activity. However, Bland-Altman plots illustrated bias toward overestimation for higher levels of MVPA, vigorous- and moderate-intensity activities, and underestimation for lower levels of these measures. Reliability for MVPA revealed moderate correlations (r s = 0.61 vs. 0.63 for self

  5. Intermonitor reliability of the GT3X+ accelerometer at hip, wrist and ankle sites during activities of daily living

    International Nuclear Information System (INIS)

    Ozemek, Cemal; Wilkerson, Brittany S; Kaminsky, Leonard A; Kirschner, Monica M; Byun, Wonwoo

    2014-01-01

    The triaxial GT3X+ accelerometer can measure activity counts in the vertical, horizontal right to left, horizontal front to back planes, and can generate a summative score of the three axes represented by vector magnitude (VM). Information on the reliability of the GT3X+ at the hip, wrist and ankle sites, over all axes and VM during activities of daily living (ADL) is lacking in the literature. Forty healthy adults (14 men and 26 women) were randomly assigned to perform 10 of 20 ADL (consisting of sedentary, housework, yard work, locomotive and recreational activities) while wearing two monitors on the hip, wrist and ankle. Subjects performed each ADL over 7 min and the mean activity counts during the last 4 min were used for analyses. Average intraclass correlations between monitors were high for the three sites for each axis and VM (hip: 0.943, 0.857, 0.864 and 0.966, respectively; wrist: 0.994, 0.963, 0.961 and 0.989, respectively; ankle: 0.977, 0.979, 0.927 and 0.986, respectively). These data suggest that GT3X+ accelerometers measurements made from the hip, wrist and ankle sites are reliable during ADL across all axes and VM. (paper)

  6. Reliability and validity of the Physical Activity Scale for the Elderly (PASE in patients with hip osteoarthritis

    Directory of Open Access Journals (Sweden)

    Svege Ida

    2012-02-01

    Full Text Available Abstract Background Physical activity (PA is beneficial in reducing pain and improving function in lower limb osteoarthritis (OA, and is recommended as a first line treatment. Self-administered questionnaires are used to assess PA, but knowledge about reliability and validity of these PA questionnaires are limited, in particular for patients with OA. The purpose of this study was to evaluate the reliability and validity of the Physical Activity Scale for the Elderly (PASE in patients with hip OA. Methods Forty patients with hip OA (20 men and 20 women, mean age 61.3 ± 10 years were included. For test-retest reliability PASE was administered twice with a mean time between tests of 9 ± 4 days. Intraclass correlation coefficient (ICC, standard error of measurement (SEM and minimal detectable change (MDC were calculated for the total score and for the particular items assessing different PA intensity levels. In addition a Bland-Altman analysis for the total PASE score was performed. Construct validity was evaluated by comparing the PASE results with the Actigraph GT1M accelerometer and the International Physical Activity Questionnaire (IPAQ, using the Spearman rank correlation coefficient. Results ICC for the total PASE score was 0.78, with relatively large error of measurement; SEM = 31 and MDC = 87. ICC for the intensity items was 0.20 for moderate PA intensity, 0.46 for light PA intensity and to 0.68 for vigorous PA intensity. The Spearman rank correlation coefficient between the Actigraph GT1M total counts per minute and the total PASE score was 0.30 (p = 0.089, and ranging from 0.20-0.38 for the different PA intensity categories. The Spearman rank correlation between IPAQ and PASE was 0.61 (p = 0.001 for the total scores. Conclusions In patients with hip OA the test-retest reliability of the total PASE score was moderate, with acceptable ICC, but with large measurement errors. The construct validity of the PASE was poor when compared to the

  7. Physical activity surveillance in the European Union: reliability and validity of the European Health Interview Survey-Physical Activity Questionnaire (EHIS-PAQ).

    Science.gov (United States)

    Baumeister, Sebastian E; Ricci, Cristian; Kohler, Simone; Fischer, Beate; Töpfer, Christine; Finger, Jonas D; Leitzmann, Michael F

    2016-05-23

    The current study examined the reliability and validity of the European Health Interview Survey-Physical Activity Questionnaire (EHIS-PAQ), a novel questionnaire for the surveillance of physical activity (PA) during work, transportation, leisure time, sports, health-enhancing and muscle-strengthening activities over a typical week. Reliability was assessed by administering the 8-item questionnaire twice to a population-based sample of 123 participants aged 15-79 years at a 30-day interval. Concurrent (inter-method) validity was examined in 140 participants by comparisons with self-report (International Physical Activity Questionnaire-Long Form (IPAQ-LF), 7-day Physical Activity Record (PAR), and objective criterion measures (GT3X+ accelerometer, physical work capacity at 75% (PWC(75%)) from submaximal cycle ergometer test, hand grip strength). The EHIS-PAQ showed acceptable reliability, with a median intraclass correlation coefficient across PA domains of 0.55 (range 0.43-0.73). Compared to the GT3X+ (counts/minutes/day), the EHIS-PAQ underestimated moderate-to-vigorous PA (median difference -11.7, p-value = 0.054). Spearman correlation coefficients (ρ) for validity were moderate-to-strong (ρ's > 0.41) for work-related PA (IPAQ = 0.64, GT3X + =0.43, grip strength = 0.48), transportation-related PA (IPAQ = 0.62, GT3X + =0.43), walking (IPAQ = 0.58), and health-enhancing PA (IPAQ = 0.58, PAR = 0.64, GT3X + =0.44, PWC(75%) = 0.48), and fair-to-poor (ρ's PAQ showed good evidence for reliability and validity for the measurement of PA levels at work, during transportation and health-enhancing PA.

  8. HACMAC: A reliable human activity-based medium access control for implantable body sensor networks

    NARCIS (Netherlands)

    Karuppiah Ramachandran, Vignesh Raja; Havinga, Paul J.M.; Meratnia, Nirvana

    Chronic care is an eminent application of implantable body sensor networks (IBSN). Performing physical activities such as walking, running, and sitting is unavoidable during the long-term monitoring of chronic-care patients. These physical activities cripple the radio frequency (RF) signal between

  9. Development of Physical Activity-Related Parenting Practices Scales for Urban Chinese Parents of Preschoolers: Confirmatory Factor Analysis and Reliability.

    Science.gov (United States)

    Suen, Yi-Nam; Cerin, Ester; Barnett, Anthony; Huang, Wendy Y J; Mellecker, Robin R

    2017-09-01

    Valid instruments of parenting practices related to children's physical activity (PA) are essential to understand how parents affect preschoolers' PA. This study developed and validated a questionnaire of PA-related parenting practices for Chinese-speaking parents of preschoolers in Hong Kong. Parents (n = 394) completed a questionnaire developed using findings from formative qualitative research and literature searches. Test-retest reliability was determined on a subsample (n = 61). Factorial validity was assessed using confirmatory factor analysis. Subscale internal consistency was determined. The scale of parenting practices encouraging PA comprised 2 latent factors: Modeling, structure and participatory engagement in PA (23 items), and Provision of appropriate places for child's PA (4 items). The scale of parenting practices discouraging PA scale encompassed 4 latent factors: Safety concern/overprotection (6 items), Psychological/behavioral control (5 items), Promoting inactivity (4 items), and Promoting screen time (2 items). Test-retest reliabilities were moderate to excellent (0.58 to 0.82), and internal subscale reliabilities were acceptable (0.63 to 0.89). We developed a theory-based questionnaire for assessing PA-related parenting practices among Chinese-speaking parents of Hong Kong preschoolers. While some items were context and culture specific, many were similar to those previously found in other populations, indicating a degree of construct generalizability across cultures.

  10. Should we reframe how we think about physical activity and sedentary behaviour measurement? Validity and reliability reconsidered.

    Science.gov (United States)

    Kelly, Paul; Fitzsimons, Claire; Baker, Graham

    2016-03-01

    The measurement of physical activity (PA) and sedentary behaviour (SB) is fundamental to health related research, policy, and practice but there are well known challenges to these measurements. Within the academic literature, the terms "validity" and "reliability" are frequently used when discussing PA and SB measurement to reassure the reader that they can trust the evidence. In this paper we argue that a lack of consensus about the best way to define, assess, or utilize the concepts of validity and reliability has led to inconsistencies and confusion within the PA and SB evidence base. Where possible we propose theoretical examples and solutions. Moreover we present an overarching framework (The Edinburgh Framework) which we believe will provide a process or pathway to help researchers and practitioners consider validity and reliability in a standardized way. Further work is required to identify all necessary and available solutions and generate consensus in our field to develop the Edinburgh Framework into a useful practical resource. We envisage that ultimately the proposed framework will benefit research, practice, policy, and teaching. We welcome critique, rebuttal, comment, and discussion on all ideas presented.

  11. 2 CFR 801.220 - What contracts and subcontracts, in addition to those listed in 2 CFR 180.220, are covered...

    Science.gov (United States)

    2010-01-01

    ... 2 Grants and Agreements 1 2010-01-01 2010-01-01 false What contracts and subcontracts, in addition to those listed in 2 CFR 180.220, are covered transactions? 801.220 Section 801.220 Grants and... DEBARMENT AND SUSPENSION Covered Transactions § 801.220 What contracts and subcontracts, in addition to...

  12. NEWS for Africa: adaptation and reliability of a built environment questionnaire for physical activity in seven African countries.

    Science.gov (United States)

    Oyeyemi, Adewale L; Kasoma, Sandra S; Onywera, Vincent O; Assah, Felix; Adedoyin, Rufus A; Conway, Terry L; Moss, Sarah J; Ocansey, Reginald; Kolbe-Alexander, Tracy L; Akinroye, Kingsley K; Prista, Antonio; Larouche, Richard; Gavand, Kavita A; Cain, Kelli L; Lambert, Estelle V; Aryeetey, Richmond; Bartels, Clare; Tremblay, Mark S; Sallis, James F

    2016-03-08

    Built environment and policy interventions are effective strategies for controlling the growing worldwide deaths from physical inactivity-related non-communicable diseases. To improve built environment research and develop African specific evidence, it is important to first tailor built environment measures to African contexts and assess their psychometric properties across African countries. This study reports on the adaptation and test-retest reliability of the Neighborhood Environment Walkability Scale in seven sub-Saharan African countries (NEWS-Africa). The original NEWS comprising 8 subscales measuring reported physical and social attributes of neighborhood environments was systematically adapted for Africa through extensive input from physical activity and public health researchers, built environment professionals, and residents in seven African countries: Cameroon, Ghana, Kenya, Mozambique, Nigeria, South Africa and Uganda. Cognitive testing of NEWS-Africa was conducted among diverse residents (N = 109, 50 youth [12 - 17 years] and 59 adults [22 - 67 years], 69 % from low socioeconomic status [SES] neighborhoods). NEWS-Africa was translated into local languages and evaluated for 2-week test-retest reliability in adult participants (N = 301; female = 50.2 %; age = 32.3 ± 12.9 years) purposively recruited from neighborhoods varying in walkability (high and low walkable) and SES (high and low income) and from villages in six of seven participating countries. The original 67 NEWS items was expanded to 89 scores (76 individual NEWS items and 13 computed scales). Several modifications were made to individual items, and some new items were added to capture important attributes in the African environment. A new scale on personal safety was created, and the aesthetics scale was enlarged to reflect African specific characteristics. Over 95 % of all NEWS-Africa scores (items plus computed scales) demonstrated evidence of "excellent" (ICCs

  13. Reliability and Validity of the Dutch Physical Activity Questionnaires for Children (PAQ-C) and Adolescents (PAQ-A).

    Science.gov (United States)

    Bervoets, Liene; Van Noten, Caroline; Van Roosbroeck, Sofie; Hansen, Dominique; Van Hoorenbeeck, Kim; Verheyen, Els; Van Hal, Guido; Vankerckhoven, Vanessa

    2014-01-01

    This study was designed to validate the Dutch Physical Activity Questionnaires for Children (PAQ-C) and Adolescents (PAQ-A). After adjustment of the original Canadian PAQ-C and PAQ-A (i.e. translation/back-translation and evaluation by expert committee), content validity of both PAQs was assessed and calculated using item-level (I-CVI) and scale-level (S-CVI) content validity indexes. Inter-item and inter-rater reliability of 196 PAQ-C and 95 PAQ-A filled in by both children or adolescents and their parent, were evaluated. Inter-item reliability was calculated by Cronbach's alpha (α) and inter-rater reliability was examined by percent observed agreement and weighted kappa (κ). Concurrent validity of PAQ-A was examined in a subsample of 28 obese and 16 normal-weight children by comparing it with concurrently measured physical activity using a maximal cardiopulmonary exercise test for the assessment of peak oxygen uptake (VO2 peak). For both PAQs, I-CVI ranged 0.67-1.00. S-CVI was 0.89 for PAQ-C and 0.90 for PAQ-A. A total of 192 PAQ-C and 94 PAQ-A were fully completed by both child and parent. Cronbach's α was 0.777 for PAQ-C and 0.758 for PAQ-A. Percent agreement ranged 59.9-74.0% for PAQ-C and 51.1-77.7% for PAQ-A, and weighted κ ranged 0.48-0.69 for PAQ-C and 0.51-0.68 for PAQ-A. The correlation between total PAQ-A score and VO2 peak - corrected for age, gender, height and weight - was 0.516 (p = 0.001). Both PAQs have an excellent content validity, an acceptable inter-item reliability and a moderate to good strength of inter-rater agreement. In addition, total PAQ-A score showed a moderate positive correlation with VO2 peak. Both PAQs have an acceptable to good reliability and validity, however, further validity testing is recommended to provide a more complete assessment of both PAQs.

  14. Reliability and Validity of the Dutch Physical Activity Questionnaires for Children (PAQ-C) and Adolescents (PAQ-A)

    OpenAIRE

    Bervoets, Liene; Van Noten, Caroline; Van Roosbroeck, Sofie; Hansen, Dominique; Van Hoorenbeeck, Kim; Verheyen, Els; Van Hal, Guido; Vankerckhoven, Vanessa

    2014-01-01

    Background This study was designed to validate the Dutch Physical Activity Questionnaires for Children (PAQ-C) and Adolescents (PAQ-A). Methods After adjustment of the original Canadian PAQ-C and PAQ-A (i.e. translation/back-translation and evaluation by expert committee), content validity of both PAQs was assessed and calculated using item-level (I-CVI) and scale-level (S-CVI) content validity indexes. Inter-item and inter-rater reliability of 196 PAQ-C and 95 PAQ-A filled in by both childre...

  15. Research activities of MPA, Stuttgart University, for enhanced safety and reliability of components under complex load

    International Nuclear Information System (INIS)

    Herter, K.H.; Roos, E.; Schuler, X.; Maile, K.

    2004-01-01

    MPA research activities focus on fracture prevention and on the development of a generally applicable method of component integrity testing which, independent of the safety relevance of the components involved, is also part of ageing management. (orig.) [de

  16. Is self-reporting workplace activity worthwhile? Validity and reliability of occupational sitting and physical activity questionnaire in desk-based workers.

    Science.gov (United States)

    Pedersen, Scott J; Kitic, Cecilia M; Bird, Marie-Louise; Mainsbridge, Casey P; Cooley, P Dean

    2016-08-19

    With the advent of workplace health and wellbeing programs designed to address prolonged occupational sitting, tools to measure behaviour change within this environment should derive from empirical evidence. In this study we measured aspects of validity and reliability for the Occupational Sitting and Physical Activity Questionnaire that asks employees to recount the percentage of work time they spend in the seated, standing, and walking postures during a typical workday. Three separate cohort samples (N = 236) were drawn from a population of government desk-based employees across several departmental agencies. These volunteers were part of a larger state-wide intervention study. Workplace sitting and physical activity behaviour was measured both subjectively against the International Physical Activity Questionnaire, and objectively against ActivPal accelerometers before the intervention began. Criterion validity and concurrent validity for each of the three posture categories were assessed using Spearman's rank correlation coefficients, and a bias comparison with 95 % limits of agreement. Test-retest reliability of the survey was reported with intraclass correlation coefficients. Criterion validity for this survey was strong for sitting and standing estimates, but weak for walking. Participants significantly overestimated the amount of walking they did at work. Concurrent validity was moderate for sitting and standing, but low for walking. Test-retest reliability of this survey proved to be questionable for our sample. Based on our findings we must caution occupational health and safety professionals about the use of employee self-report data to estimate workplace physical activity. While the survey produced accurate measurements for time spent sitting at work it was more difficult for employees to estimate their workplace physical activity.

  17. Is self-reporting workplace activity worthwhile? Validity and reliability of occupational sitting and physical activity questionnaire in desk-based workers

    Directory of Open Access Journals (Sweden)

    Scott J. Pedersen

    2016-08-01

    Full Text Available Abstract Background With the advent of workplace health and wellbeing programs designed to address prolonged occupational sitting, tools to measure behaviour change within this environment should derive from empirical evidence. In this study we measured aspects of validity and reliability for the Occupational Sitting and Physical Activity Questionnaire that asks employees to recount the percentage of work time they spend in the seated, standing, and walking postures during a typical workday. Methods Three separate cohort samples (N = 236 were drawn from a population of government desk-based employees across several departmental agencies. These volunteers were part of a larger state-wide intervention study. Workplace sitting and physical activity behaviour was measured both subjectively against the International Physical Activity Questionnaire, and objectively against ActivPal accelerometers before the intervention began. Criterion validity and concurrent validity for each of the three posture categories were assessed using Spearman’s rank correlation coefficients, and a bias comparison with 95 % limits of agreement. Test-retest reliability of the survey was reported with intraclass correlation coefficients. Results Criterion validity for this survey was strong for sitting and standing estimates, but weak for walking. Participants significantly overestimated the amount of walking they did at work. Concurrent validity was moderate for sitting and standing, but low for walking. Test-retest reliability of this survey proved to be questionable for our sample. Conclusions Based on our findings we must caution occupational health and safety professionals about the use of employee self-report data to estimate workplace physical activity. While the survey produced accurate measurements for time spent sitting at work it was more difficult for employees to estimate their workplace physical activity.

  18. Validity and reliability of instruments to assess potential mediators of children's physical activity: A systematic review

    NARCIS (Netherlands)

    Brown, H.; Hume, C.; Chin A Paw, J.M.M.

    2009-01-01

    This paper aimed to (1) identify potential mediators reported in children's physical activity interventions; and (2) review the psychometric properties of measures of potential mediators included in such interventions. A systematic search of the literature was conducted and studies that reported

  19. Subcontracted Forms and “Intermediary” Agents of Employment Relationships: Foremen in the Construction Sector

    Directory of Open Access Journals (Sweden)

    Elife Kart

    2016-12-01

    Full Text Available Integration of flexible and precarious structure of employment conditions and relations with subcontracting strategies enables companies to conserve their competitive power in one sense; it also introduces the conditions, which are increasingly irregulated, temporal and destabilized, with regards to the labour power. On the other hand subcontracting, as a strategy of fragmenting, individualizing and isolating labour power in itself means that working conditions have been becoming more manageable in terms of capital. In this study, focusing on the positions of intermediary persons, defined as foremen in the labour market, especially in the construction sector, the strategies with which employment relationships become increasingly unsteady, indefinite and temporal are discussed. On the one hand, depending on the efforts of capital to reproduce itself on a global scale, the effects of capital on labour power are considered on the other, how these efforts produce the intermediary agents and through them how the labour power is instrumentilized as a tool of profit and productivity are analyzed. And the fabrication of the intermediary agents, which make the new forms of domination in employment relationships visible, is studied. The study is discussed through data gathered from in-depth interviews with subcontractors

  20. Development and reliability testing of a Health Action Process Approach inventory for physical activity participation among individuals with schizophrenia

    Directory of Open Access Journals (Sweden)

    Kelly eArbour-Nicitopoulos

    2014-06-01

    Full Text Available Individuals with schizophrenia tend to have high levels of cardiovascular disease and lower physical activity (PA levels than the general population. Research is urgently required in developing evidence-based behavioral interventions for increasing PA in this population. One model that has been increasingly used to understand the mechanisms underlying PA is the Health Action Process Approach (HAPA. The purpose of this study was to adapt and pilot-test a HAPA-based inventory that reliably captures salient, modifiable PA determinants for individuals with schizophrenia. Initially, twelve outpatients with schizophrenia reviewed the inventory and provided verbal feedback regarding comprehension, item relevance, and potential new content. A content analysis framework was used to inform modifications to the inventory. The resultant inventory underwent a quantitative assessment of internal consistency and test-retest reliability. Twenty-five outpatients (Mage= 41.5 ± 13.5 years; 64% male completed the inventory on two separate occasions, one week apart. All but two scales showed good internal consistency (Cronbach’s α=0.62–0.98 and test-retest correlations (rs = .21-.96. Preliminary assessment of criterion validity of the HAPA inventory showed significant, large-sized correlations between behavioural intentions and both affective outcome expectancies and task self-efficacy, and small-to-moderate correlations between self-reported minutes of moderate-to-vigorous PA and the volitional constructs of the HAPA model. These findings provide preliminary support for the reliability and validity of the first-ever inventory for examining theory-based predictors of moderate to vigorous PA intentions and behavior among individuals with schizophrenia. Further validation research with this inventory using an objective measure of PA behavior will provide additional support for its psychometric properties within the schizophrenia population.

  1. Development, validity, and reliability of the General Activities of Daily Living Scale: a multidimensional measure of activities of daily living for older people

    Directory of Open Access Journals (Sweden)

    Jonas J. de Paula

    2014-05-01

    Full Text Available Objective: To propose and evaluate the psychometric properties of a multidimensional measure of activities of daily living (ADLs based on the Katz and Lawton indices for Alzheimer's disease (AD and mild cognitive impairment (MCI. Methods: In this study, 85 patients with MCI and 93 with AD, stratified by age (≤ 74 years, > 74 years, completed the Mini Mental State Examination (MMSE and the Geriatric Depression Scale, and their caregivers completed scales for ADLs. Construct validity (factor analysis, reliability (internal consistency, and criterion-related validity (receiver operating characteristic analysis and logistic regression were assessed. Results: Three factors of ADL (self-care, domestic activities, and complex activities were identified and used for item reorganization and for the creation of a new inventory, called the General Activities of Daily Living Scale (GADL. The components showed good internal consistency (> 0.800 and moderate (younger participants or high (older participants accuracy for the distinction between MCI and AD. An additive effect was found between the GADL complex ADLs and global ADLs with the MMSE for the correct classification of younger patients. Conclusion: The GADL showed evidence of validity and reliability for the Brazilian elderly population. It may also play an important role in the differential diagnosis of MCI and AD.

  2. Reliability of activation cross sections for estimation of shutdown dose rate in the ITER port cell and port interspace

    Science.gov (United States)

    García, Raquel; García, Mauricio; Ogando, Francisco; Pampin, Raúl; Sanz, Javier

    2017-09-01

    This paper explores the quality of available activation cross section (XS) data for accurate Shutdown Dose Rate (SDDR) prediction in the ITER Port Cell and Port Interspace areas, where different maintenance activities are foreseen. For this purpose the EAF library (2007 and 2010 versions) has been investigated, as it is typically used by the ITER community. Based on both reports/papers on SDDR in ITER and own calculations, major nuclides contributing to the SDDR coming from the activation of i) relevant materials placed in ITER and ii) candidate materials for the bioshield plug as L2N and barite concretes, are identified. Then, relevant production pathways are obtained. EAF XS quality for all pathways is checked following the procedure used for validating and testing the successive EAF versions. Also, possible improvements from using the TENDL-2015 library are assessed by comparing EAF and TENDL XS with available differential experimental data from EXFOR. Results point out that most of the activation XS related to materials currently placed in ITER are reliable, and only a few need improvement. Also, many of the XS related to both L2N and barite concretes need further work for validation.

  3. Status of reliability in determining SDDR for manual maintenance activities in ITER: Quality assessment of relevant activation cross sections involved

    International Nuclear Information System (INIS)

    Garcia, R.; Garcia, M.; Pampin, R.; Sanz, J.

    2016-01-01

    Highlights: • Feasibility of manual maintenance activities in ITER port cell and port interspace. • Activation of relevant materials and components placed in the current ITER model. • Dominant radionuclides and pathways for shutdown dose rate in ITER. • Quality analysis of typically used EAF and TENDL activation libraries is performed. • EAF performance found as trustworthy with slight recommended improvements. - Abstract: This paper assesses the quality of the EAF-2007 and 2010 activation cross sections for relevant reactions in the determination of the Shutdown Dose Rate (SDDR) in the Port Cell (PC) and Port Interspace (PI) areas of ITER. For each of relevant ITER materials, dominant radionuclides responsible of SDDR and their production pathways are listed. This information comes from a review of the recent reports/papers about SDDR in ITER and own calculations. A total of 26 relevant pathways are found. The quality of these cross sections pathways is assessed following EAF validation procedure, and for those found as not validated last TENDL library versions have been investigated in order to check possible improvements when compared to EAF. The use of EAF libraries is found as trustworthy and it is recommended for the prediction of SDDR in the ITER PC and PI. However, 3 cross section reactions are considered for further improvement: Co59(n,2n)Co58, Cu63(n,g)Cu64 and Cr50(n,g)Cr51.

  4. Status of reliability in determining SDDR for manual maintenance activities in ITER: Quality assessment of relevant activation cross sections involved

    Energy Technology Data Exchange (ETDEWEB)

    Garcia, R., E-mail: rgarciam@ind.uned.es [UNED, Power Engineering Department, C/Juan del Rosal 12, 28040 Madrid (Spain); Garcia, M. [UNED, Power Engineering Department, C/Juan del Rosal 12, 28040 Madrid (Spain); Pampin, R. [F4E, Torres Diagonal Litoral B3, Barcelona (Spain); Sanz, J. [UNED, Power Engineering Department, C/Juan del Rosal 12, 28040 Madrid (Spain)

    2016-11-15

    Highlights: • Feasibility of manual maintenance activities in ITER port cell and port interspace. • Activation of relevant materials and components placed in the current ITER model. • Dominant radionuclides and pathways for shutdown dose rate in ITER. • Quality analysis of typically used EAF and TENDL activation libraries is performed. • EAF performance found as trustworthy with slight recommended improvements. - Abstract: This paper assesses the quality of the EAF-2007 and 2010 activation cross sections for relevant reactions in the determination of the Shutdown Dose Rate (SDDR) in the Port Cell (PC) and Port Interspace (PI) areas of ITER. For each of relevant ITER materials, dominant radionuclides responsible of SDDR and their production pathways are listed. This information comes from a review of the recent reports/papers about SDDR in ITER and own calculations. A total of 26 relevant pathways are found. The quality of these cross sections pathways is assessed following EAF validation procedure, and for those found as not validated last TENDL library versions have been investigated in order to check possible improvements when compared to EAF. The use of EAF libraries is found as trustworthy and it is recommended for the prediction of SDDR in the ITER PC and PI. However, 3 cross section reactions are considered for further improvement: Co59(n,2n)Co58, Cu63(n,g)Cu64 and Cr50(n,g)Cr51.

  5. 48 CFR 212.570 - Applicability of certain laws to contracts and subcontracts for the acquisition of commercially...

    Science.gov (United States)

    2010-10-01

    ..., DEPARTMENT OF DEFENSE ACQUISITION PLANNING ACQUISITION OF COMMERCIAL ITEMS Applicability of Certain Laws to the Acquisition of Commercial Items 212.570 Applicability of certain laws to contracts and... laws to contracts and subcontracts for the acquisition of commercially available off-the-shelf items...

  6. 48 CFR 970.1907 - Subcontracting with Small Business, Small Disadvantaged Business and Woman-Owned Small Business...

    Science.gov (United States)

    2010-10-01

    ... MANAGEMENT AND OPERATING CONTRACTS Small, Small Disadvantaged and Women-Owned Small Business Concerns 970.1907 Subcontracting with Small Business, Small Disadvantaged Business and Woman-Owned Small Business... Business, Small Disadvantaged Business and Woman-Owned Small Business Concerns. 970.1907 Section 970.1907...

  7. Subcontracting relations and their effects on safety and security in two firms: SNCF and GrDF

    International Nuclear Information System (INIS)

    Ponnet, Marie

    2011-01-01

    Because of economical processes that tend to move the frontiers of firms salaried relations of uncertain status are found coexisting inside the very same working world. From a qualitative investigation mixing employees' interviews and observations made on SNCF and GrDF working sites our research offers to think about the relations linking subcontracting, maintenance, safety and security. Considering subcontracting as a particular way for professional bodies to be associated allows us to wonder about its effects within a same firm (the 'integrated' subcontracting) as much as between a principal and a provider. Our thesis shows that when change occurs inside the organization - like the creation of new committees of experts or the reorganizing of an old service - security and safety can be impacted because thus professional bodies tend to be reconfigured while modifications affect practices, professional identities and work division. The relations between subcontractors and principal are complicated and their consequences depend from the context they are placed in, determined by a combination of various characteristics such as the confidence level, the available time, the reputation, the position occupied by the subcontractor. Our investigation makes clear that there is no direct link between subcontracting, security and safety. Their effects, in spite of their reality, are submitted to the altering mediation of legal factors (related to economic national and European issues) and concern the working organization as well as the professional identities. (author)

  8. Small Business: Action Needed to Determine Whether DOD’s Comprehensive Subcontracting Plan Test Program Should Be Made Permanent

    Science.gov (United States)

    2015-11-01

    plan to mean “willful or intentional failure to perform in accordance with the requirements of the subcontracting plan, or willful or intentional ...Shaheen Ranking Member Committee on Small Business and Entrepreneurship United States Senate The Honorable Mac Thornberry Chairman The Honorable

  9. Use of time and materials and cost reimbursement subcontracts for remedial actions under the alternative remedial contracting strategy contracts. Directive

    International Nuclear Information System (INIS)

    1992-01-01

    The directive is intended to establish agency guidance on the use of time and materials and cost reimbursement contracts for remedial actions in general and to provide specific instruction regarding the use of these approaches in subcontracting under the Alternative Remedial Contracting Strategy (ARCS) contracts

  10. 48 CFR 252.244-7000 - Subcontracts for Commercial Items and Commercial Components (DoD Contracts).

    Science.gov (United States)

    2010-10-01

    ... under this contract: (a) 252.225-7009 Restriction on Acquisition of Certain Articles Containing... 48 Federal Acquisition Regulations System 3 2010-10-01 2010-10-01 false Subcontracts for Commercial Items and Commercial Components (DoD Contracts). 252.244-7000 Section 252.244-7000 Federal...

  11. The reliability of nonlinear least-squares algorithm for data analysis of neural response activity during sinusoidal rotational stimulation in semicircular canal neurons.

    Science.gov (United States)

    Ren, Pengyu; Li, Bowen; Dong, Shiyao; Chen, Lin; Zhang, Yuelin

    2018-01-01

    Although many mathematical methods were used to analyze the neural activity under sinusoidal stimulation within linear response range in vestibular system, the reliabilities of these methods are still not reported, especially in nonlinear response range. Here we chose nonlinear least-squares algorithm (NLSA) with sinusoidal model to analyze the neural response of semicircular canal neurons (SCNs) during sinusoidal rotational stimulation (SRS) over a nonlinear response range. Our aim was to acquire a reliable mathematical method for data analysis under SRS in vestibular system. Our data indicated that the reliability of this method in an entire SCNs population was quite satisfactory. However, the reliability was strongly negatively depended on the neural discharge regularity. In addition, stimulation parameters were the vital impact factors influencing the reliability. The frequency had a significant negative effect but the amplitude had a conspicuous positive effect on the reliability. Thus, NLSA with sinusoidal model resulted a reliable mathematical tool for data analysis of neural response activity under SRS in vestibular system and more suitable for those under the stimulation with low frequency but high amplitude, suggesting that this method can be used in nonlinear response range. This method broke out of the restriction of neural activity analysis under nonlinear response range and provided a solid foundation for future study in nonlinear response range in vestibular system.

  12. Activities of the task group 8 on thin film PV module reliability (Conference Presentation)

    Science.gov (United States)

    Dhere, Neelkanth G.

    2016-09-01

    Photovoltaic (PV) modules and systems are being used increasingly to provide renewable energy to schools, residences, small businesses and utilities. At this time, the home owners and small businesses have considerable difficulty in detecting module and/or system degradation and especially enforcing warranty. It needs to be noted that IEC 61215-1 (test req.), -2 (test proc.) and -1-1 (c-Si) are forecasted to be circulated end of Feb 2016 and only editorial changes would be possible. 61215 series does include thin film technologies and would be replacing 61646. Moreover, IEC 61215-1, section 7.2 power output and electric circuitry does contain significant changes to acceptance criteria regarding rated label values, particularly rated power. Even though it is believed that consensus could be achieved within IEC TC82 WG2, some of the smaller players that do not participate actively in IEC TC82 - may not be surprised and must be informed. The other tech specific parts 61215-1-2 (CdTe), -1-3 (a-Si, µc-Si) and -1-4 (CIS, CIGS) are out for comments. The IEC closing date was January 29, 2016. The additions alternative damp heat (DH) test proposed Solar Frontier is being reviewed. In the past, only 600 V systems were permitted in the grid-connected residential and commercial systems in the US. The US commercial systems can now use higher voltage (1,000-1500V) in order to reduce BOS component costs. It is believed that there would not be any problems. The Task Group 8 is collecting data on higher voltage systems.

  13. α-Amylase as a reliable and convenient measure of sympathetic activity: don't start salivating just yet!

    Science.gov (United States)

    Bosch, Jos A; Veerman, Enno C I; de Geus, Eco J; Proctor, Gordon B

    2011-05-01

    Recent years have seen a growing interest in salivary α-amylase (sAA) as a non-invasive marker for sympathetic nervous system (SNS) activity. Saliva offers many advantages as a biomarker fluid and sAA is one of its most plentiful components. sAA is a digestive enzyme that breaks down starch, which provides a simple means of quantification by measuring its enzymatic activity. This commentary will address a number of common misconceptions and methodological issues that surround the use of sAA as a marker of SNS activity and limit its utility in biobehavioral research. The usefulness of sAA as an SNS marker is undermined by the fact that the parasympathetic nerves also play a significant role in sAA release. Local parasympathetic nerves regulate sAA activity via: (1) α-amylase release from glands that are solely or mainly parasympathetically innervated; (2) via synergistic sympathetic-parasympathetic effects on protein secretion (known as 'augmented secretion'); and (3) via effects on salivary flow rate. Regarding methodology, we discuss why it is problematic: (1) to ignore the contribution of salivary flow rate; (2) to use absorbent materials for saliva collection, and; (3) to stimulate saliva secretion by chewing. While these methodological problems can be addressed by using standardized and timed collection of unstimulated saliva, the physiological regulation of sAA secretion presents less resolvable issues. We conclude that at present there is insufficient support for the use and interpretation of sAA activity as a valid and reliable measure of SNS activity. Copyright © 2011 Elsevier Ltd. All rights reserved.

  14. A reliable radiochromatographic assay technique for hepatic microsomal 16α-hydroxylase activity towards oestrone 3-sulphate

    International Nuclear Information System (INIS)

    Tsoutsoulis, C.J.; Hobkirk, R.

    1980-01-01

    A reliable procedure for the assay of liver microsomal 16α-hydroxylation of oestrone 3-sulphate has been developed for the guinea pig. It is based on the rapid, quantitative separation of oestradiol and oestriol by Sephadex LH-20 columns after the chemical reduction and enzymic hydrolysis of the incubation products. Microsomal preparations and incubation conditions that optimized 16α-hydroxylation of oestrone 3-sulphate were employed. Under these circumstances, reduction of the substrate at C-17 and hydrolysis of the sulphate were minimized. Conditions were established that yielded reaction linearity with respect to time and microsomal concentration. This hydroxylation had an absolute requirement for NADPH, which could not be satisfied by NADH. Apparent Ksub(m) values for oestrone 3-sulphate and NADPH, under the conditions used, were 14μM and 0.17mM respectively. 16α-hydroxylase activity was present in the liver microsomal fraction from heavily pigmented, female English Shorthaired guinea pigs. Much lower activity was detected in mature pigmented males and albino females. No activity could be demonstrated in mature, albino males. (author)

  15. Reliable, Low-Cost Distributed Generator/Utility System Interconnect: Final Subcontract Report, November 2001-March 2004

    Energy Technology Data Exchange (ETDEWEB)

    Ye, Z.; Walling, R.; Miller, N.; Du, P.; Nelson, K.; Li, L.; Zhou, R.; Garces, L.; Dame, M.

    2006-03-01

    This report summarizes the detailed study and development of new GE anti-islanding controls for two classes of distributed generation. One is inverter-interfaced, while the other is synchronous machine interfaced.

  16. Lessons learned from the EG ampersand G consolidated hazardous waste subcontract and ESH ampersand Q liability assessment process

    International Nuclear Information System (INIS)

    Fix, N.J.

    1995-03-01

    Hazardous waste transportation, treatment, recycling, and disposal contracts were first consolidated at the Idaho National Engineering Laboratory in 1992 by EG and G Idaho, Inc. At that time, disposition of Resource, Conservation and Recovery Act hazardous waste, Toxic Substance Control Act waste, Comprehensive Environmental Response, Compensation, and Liability Act hazardous substances and contaminated media, and recyclable hazardous materials was consolidated under five subcontracts. The wastes were generated by five different INEL M and O contractors, under the direction of three different Department of Energy field offices. The consolidated contract reduced the number of facilities handling INEL waste from 27 to 8 qualified treatment, storage, and disposal facilities, with brokers specifically prohibited. This reduced associated transportation costs, amount and cost of contractual paperwork, and environmental liability exposure. EG and G reviewed this approach and proposed a consolidated hazardous waste subcontract be formed for the major EG and G managed DOE sites: INEL, Mound, Rocky Flats, Nevada Test Site, and 10 satellite facilities. After obtaining concurrence from DOE Headquarters, this effort began in March 1992 and was completed with the award of two master task subcontracts in October and November 1993. In addition, the effort included a team to evaluate the apparent awardee's facilities for environment, safety, health, and quality (ESH and Q) and financial liability status. This report documents the evaluation of the process used to prepare, bid, and award the EG and G consolidated hazardous waste transportation, treatment, recycling, and/or disposal subcontracts and associated ESH and Q and financial liability assessments; document the strengths and weaknesses of the process; and propose improvements that would expedite and enhance the process for other DOE installations that used the process and for the re-bid of the consolidated subcontract

  17. Lessons learned from the EG&G consolidated hazardous waste subcontract and ESH&Q liability assessment process

    Energy Technology Data Exchange (ETDEWEB)

    Fix, N.J.

    1995-03-01

    Hazardous waste transportation, treatment, recycling, and disposal contracts were first consolidated at the Idaho National Engineering Laboratory in 1992 by EG&G Idaho, Inc. At that time, disposition of Resource, Conservation and Recovery Act hazardous waste, Toxic Substance Control Act waste, Comprehensive Environmental Response, Compensation, and Liability Act hazardous substances and contaminated media, and recyclable hazardous materials was consolidated under five subcontracts. The wastes were generated by five different INEL M&O contractors, under the direction of three different Department of Energy field offices. The consolidated contract reduced the number of facilities handling INEL waste from 27 to 8 qualified treatment, storage, and disposal facilities, with brokers specifically prohibited. This reduced associated transportation costs, amount and cost of contractual paperwork, and environmental liability exposure. EG&G reviewed this approach and proposed a consolidated hazardous waste subcontract be formed for the major EG&G managed DOE sites: INEL, Mound, Rocky Flats, Nevada Test Site, and 10 satellite facilities. After obtaining concurrence from DOE Headquarters, this effort began in March 1992 and was completed with the award of two master task subcontracts in October and November 1993. In addition, the effort included a team to evaluate the apparent awardee`s facilities for environment, safety, health, and quality (ESH&Q) and financial liability status. This report documents the evaluation of the process used to prepare, bid, and award the EG&G consolidated hazardous waste transportation, treatment, recycling, and/or disposal subcontracts and associated ESH&Q and financial liability assessments; document the strengths and weaknesses of the process; and propose improvements that would expedite and enhance the process for other DOE installations that used the process and for the re-bid of the consolidated subcontract, scheduled for 1997.

  18. Subcontract Competition.

    Science.gov (United States)

    1982-11-01

    McAreavy Advanced Attack Helicopter, ATTN;. DRCPM-AAH Target Acquisition Designation System/Pilot Night Vision System, ATTN; nRCPM-AAH-TP USA Aviation...Arabian National Guard Modernization Program, ATTN: DRCPM-NG USA Communications-Electronics Command, ATTN: DRCPM-GARS SMOKE/OBSCURANTS, ATTN; DRCPM...LI~ C.’ t4 oo C) ON )~ al C a;- n en𔃾D 9- C% L In C) c! o c5 4o Lo’ w - 0) ’. co L t~0 0l C)O~L 1,.- ool *.- # 0 t; -, j CC -J tmj Li -00 0 0 C 0*J

  19. Subcontract Report: Final Report on Assessment of Motor Technologies for Traction Drives of Hybrid and Electric Vehicles (Subcontract #4000080341)

    Energy Technology Data Exchange (ETDEWEB)

    Fezzler, Raymond [BIZTEK Consulting, Inc.

    2011-03-01

    Currently, interior permanent magnet (IPM) motors with rare-earth (RE) magnets are almost universally used for hybrid and electric vehicles (EVs) because of their superior properties, particularly power density. However, there is now a distinct possibility of limited supply or very high cost of RE magnets that could make IPM motors unavailable or too expensive. Because development of electric motors is a critical part of the U.S. Department of Energy (DOE) Advanced Power Electronics and Motors activity, DOE needs to determine which options should be investigated and what barriers should be addressed. Therefore, in order to provide a basis for deciding which research topics should be pursued, an assessment of various motor technologies was conducted to determine which, if any, is potentially capable of meeting FreedomCAR 2015 and 2020 targets. Highest priority was given to IPM, surface mounted permanent magnet (SPM), induction, and switched reluctance (SR) motors. Also of interest, but with lesser emphasis, were wheel motors, multiple-rotor motors, motors with external excitation, and several others that emerged from the assessment. Cost and power density (from a design perspective, the power density criterion translates to torque density) are emerging as the two most important properties of motors for traction drives in hybrid and EVs, although efficiency and specific power also are very important. The primary approach for this assessment involved interviews with original equipment manufacturers (OEMs), their suppliers, and other technical experts. For each technology, the following issues were discussed: (1) The current state-of-the-art performance and cost; (2) Recent trends in the technology; (3) Inherent characteristics of the motor - which ones limit the ability of the technology to meet the targets and which ones aid in meeting the target; (4) What research and development (R&D) would be needed to meet the targets; and (5) The potential for the technology to

  20. Software reliability

    CERN Document Server

    Bendell, A

    1986-01-01

    Software Reliability reviews some fundamental issues of software reliability as well as the techniques, models, and metrics used to predict the reliability of software. Topics covered include fault avoidance, fault removal, and fault tolerance, along with statistical methods for the objective assessment of predictive accuracy. Development cost models and life-cycle cost models are also discussed. This book is divided into eight sections and begins with a chapter on adaptive modeling used to predict software reliability, followed by a discussion on failure rate in software reliability growth mo

  1. Reliability and Validation of the International Consultation on Incontinence Questionnaire in Over Active Bladder to Persian Language.

    Science.gov (United States)

    Sari Motlagh, Reza; Hajebrahimi, Sakineh; Sadeghi-Bazargani, Homayoun; Joodi Tutunsaz, Javad

    2015-05-01

    Overactive bladder syndrome is a common syndrome in the world in both men and women. Correct diagnosis and accurate measurement of symptoms severity and also quality of life of patients is necessary to ensure proper treatment and to facilitate sound relationships among patients, researchers and doctors. The International Consultation on Incontinence Questionnaire in Over Active Bladder (ICIQ-OAB) questionnaire is a concise and strong tool to evaluate the symptoms of OAB and their effects on patients' quality of life and treatment results. The objective of this study was to translate and validate a simple and strong tool that could be used in clinics and research. First, the original British English questionnaire was translated into Persian by two bilingual and originally Persian-speaking translators. Then the Persian version was back translated to English and a native English speaker studied and compared the questionnaire with the original version. At the end, the translated and corrected Persian version was finalized by a research team. Content validity of the items and ensuring that the questions could convey the main concept to readers was assessed through Modified Content Validity Index (MCVI). Reliability was calculated by Cronbach's α coefficient. Internal Consistency of the questionnaire with the calculation of Kendall correlation coefficient were evaluated by performing test-retest in 50 participants. The modified content validity index was > 0.78 for all of the questions. Cronbach's α coefficient was calculated 0.76 for all of the participants. Kendall correlation coefficient was calculated for test-re-test assessment 0.66. Both of which indicates the reliability of this questionnaire. Persian version of ICIQ-OAB questionnaire is a simple and strong tool for research, treatment and screening purposes. © 2014 Wiley Publishing Asia Pty Ltd.

  2. Reliability and validity of Yo-Yo tests in 9- to 16-year-old football players and matched non-sports active schoolboys

    DEFF Research Database (Denmark)

    Póvoas, Susana C A; Castagna, Carlo; Soares, José M C

    2016-01-01

    The purpose of this study was to examine the test-retest reliability and construct validity of three age-adapted Yo-Yo intermittent tests in football players aged 9-16 years (n = 70) and in age-matched non-sports active boys (n = 72). Within 7 days, each participant performed two repetitions...... performances and HRpeak are reliable for 9- to 16-year-old footballers and non-sports active boys. Additionally, performances of the three Yo-Yo tests were seemingly better for football-trained than for non-sports active boys, providing evidence of construct validity....

  3. A reliability study on influence of the geosphere thickness over the activity release from a near surface radioactive waste repository

    Energy Technology Data Exchange (ETDEWEB)

    Aguiar, Lais Alencar de, E-mail: laguiar@cnen.gov.br [Comissao Nacional de Energia Nuclear (CNEN-RJ), Rio de Janeiro, RJ (Brazil); Damaso, Vinicius Correa, E-mail: vcdamaso@gmail.com [Estado-Maior do Exercito (EME/EB), Brasilia, DF (Brazil)

    2013-07-01

    Infiltration of water into a waste disposal facility and into the waste region is the main factor inducing the release of radionuclides from a disposal facility. Since infiltrating water flow is dependent on the natural percolation at the site and the performance of engineered barriers, its prediction requires modelling of unsaturated water flow through intact or partially/completely failed components of engineered barriers and through the rock layer of the geosphere on which the repository is constructed. The engineered barriers include the cover systems, concrete vault, backfill, waste forms, and overpacks. This paper aims to carry out a performance study regarding a near surface repository in terms of reliability engineering. It is assumed that surface water infiltrates through the barriers reaching the matrix where radionuclides are contained, thus releasing them into the environment. The repository consists of a set of barriers which are considered saturated porous medium. As results, this paper presents the relation between the thickness of the geosphere layer and the radionuclide release rate in terms of activity. Such results represent a useful information for choosing the repository sites in order to keep the released activity in acceptable levels over time. (author)

  4. A reliability study on influence of the geosphere thickness over the activity release from a near surface radioactive waste repository

    International Nuclear Information System (INIS)

    Aguiar, Lais Alencar de; Damaso, Vinicius Correa

    2013-01-01

    Infiltration of water into a waste disposal facility and into the waste region is the main factor inducing the release of radionuclides from a disposal facility. Since infiltrating water flow is dependent on the natural percolation at the site and the performance of engineered barriers, its prediction requires modelling of unsaturated water flow through intact or partially/completely failed components of engineered barriers and through the rock layer of the geosphere on which the repository is constructed. The engineered barriers include the cover systems, concrete vault, backfill, waste forms, and overpacks. This paper aims to carry out a performance study regarding a near surface repository in terms of reliability engineering. It is assumed that surface water infiltrates through the barriers reaching the matrix where radionuclides are contained, thus releasing them into the environment. The repository consists of a set of barriers which are considered saturated porous medium. As results, this paper presents the relation between the thickness of the geosphere layer and the radionuclide release rate in terms of activity. Such results represent a useful information for choosing the repository sites in order to keep the released activity in acceptable levels over time. (author)

  5. Addressing the fundamental issues in reliability evaluation of passive safety of AP1000 for a comparison with active safety of PWR

    International Nuclear Information System (INIS)

    Hashim Muhammad; Yoshikawa, Hidekazu; Yang Ming

    2013-01-01

    Passive safety systems adopted in advanced Pressurized Water Reactor (PWR), such as AP1000 and EPR, should attain higher reliability than the existing active safety systems of the conventional PWR. The objective of this study is to discuss the fundamental issues relating to the reliability evaluation of AP1000 passive safety systems for a comparison with the active safety systems of conventional PWR, based on several aspects. First, comparisons between conventional PWR and AP1000 are made from the both aspects of safety design and cost reduction. The main differences between these PWR plants exist in the configurations of safety systems: AP1000 employs the passive safety system while reducing the number of active systems. Second, the safety of AP1000 is discussed from the aspect of severe accident prevention in the event of large break loss of coolant accidents (LOCA). Third, detailed fundamental issues on reliability evaluation of AP1000 passive safety systems are discussed qualitatively by using single loop models of safety systems of both PWRs plants. Lastly, methodology to conduct quantitative estimation of dynamic reliability for AP1000 passive safety systems in LOCA condition is discussed, in order to evaluate the reliability of AP1000 in future by a success-path-based reliability analysis method (i.e., GO-FLOW). (author)

  6. Human reliability

    International Nuclear Information System (INIS)

    Embrey, D.E.

    1987-01-01

    Concepts and techniques of human reliability have been developed and are used mostly in probabilistic risk assessment. For this, the major application of human reliability assessment has been to identify the human errors which have a significant effect on the overall safety of the system and to quantify the probability of their occurrence. Some of the major issues within human reliability studies are reviewed and it is shown how these are applied to the assessment of human failures in systems. This is done under the following headings; models of human performance used in human reliability assessment, the nature of human error, classification of errors in man-machine systems, practical aspects, human reliability modelling in complex situations, quantification and examination of human reliability, judgement based approaches, holistic techniques and decision analytic approaches. (UK)

  7. Reliability Calculations

    DEFF Research Database (Denmark)

    Petersen, Kurt Erling

    1986-01-01

    Risk and reliability analysis is increasingly being used in evaluations of plant safety and plant reliability. The analysis can be performed either during the design process or during the operation time, with the purpose to improve the safety or the reliability. Due to plant complexity and safety...... and availability requirements, sophisticated tools, which are flexible and efficient, are needed. Such tools have been developed in the last 20 years and they have to be continuously refined to meet the growing requirements. Two different areas of application were analysed. In structural reliability probabilistic...... approaches have been introduced in some cases for the calculation of the reliability of structures or components. A new computer program has been developed based upon numerical integration in several variables. In systems reliability Monte Carlo simulation programs are used especially in analysis of very...

  8. Validity and reliability of a Malay version of the Lawton instrumental activities of daily living scale among the Malay speaking elderly in Malaysia.

    Science.gov (United States)

    Kadar, Masne; Ibrahim, Suhaili; Razaob, Nor Afifi; Chai, Siaw Chui; Harun, Dzalani

    2018-02-01

    The Lawton Instrumental Activities of Daily Living Scale is a tool often used to assess independence among elderly at home. Its suitability to be used with the elderly population in Malaysia has not been validated. This current study aimed to assess the validity and reliability of the Lawton Instrumental Activities of Daily Living Scale - Malay Version to Malay speaking elderly in Malaysia. This study was divided into three phases: (1) translation and linguistic validity involving both forward and backward translations; (2) establishment of face validity and content validity; and (3) establishment of reliability involving inter-rater, test-retest and internal consistency analyses. Data used for these analyses were obtained by interviewing 65 elderly respondents. Percentages of Content Validity Index for 4 criteria were from 88.89 to 100.0. The Cronbach α coefficient for internal consistency was 0.838. Intra-class Correlation Coefficient of inter-rater reliability and test-retest reliability was 0.957 and 0.950 respectively. The result shows that the Lawton Instrumental Activities of Daily Living Scale - Malay Version has excellent reliability and validity for use with the Malay speaking elderly people in Malaysia. This scale could be used by professionals to assess functional ability of elderly who live independently in community. © 2018 Occupational Therapy Australia.

  9. Implemented organisation for subcontracting companies involved in the maintenance of the French nuclear stock - Sheet nr 39

    International Nuclear Information System (INIS)

    2011-01-01

    Every year, some 20,000 subcontracted salaried employees are mobilised for maintenance operations in the French nuclear reactors. Subcontracting is an answer to different needs: specific abilities, the short delay for maintenance during which a reactor is stopped, and which requires a very important contribution of labour, and specialised labour for some interventions. The document evokes a rigorous selection and certification process, and indicates the different specific training which are organised for anyone intervening in a nuclear power plant. It outlines that radiation protection and safety arrangements are the same for all (dosimetry), and that some measurements are performed on some temporary workers. Some data shows that these controls are efficient and that safety is improving

  10. Specific PVMaT R&D in CdTe Product Manufacturing: Final Subcontract Report, March 2003

    Energy Technology Data Exchange (ETDEWEB)

    Bohland, J.; McMaster, A.; Henson, S.; Hanak, J.

    2004-01-01

    Results of a 3+ year subcontract are presented. The research was conducted under Phase 5A2 of the subcontract. The three areas of effort in the subcontract were (1) manufacturing line improvements, (2) product readiness, and (3) environmental, safety, and health programs. The subcontract consisted of three phases, approximately 1 year each. Phase I included the development, design, and implementation of a high-throughput, low-cost lamination process. This goal was achieved using the support of key experts such as Automation and Robotics Research Institute (ARRI) to identify appropriate lamination equipment vendors, and material handling. Product designs were reviewed by Arizona State University Photovoltaic Testing Laboratory and Underwriters Laboratories. Modifications to the module designs were implemented to meet future testing requirements. A complete review of the Environmental, Health, and Safety programs was conducted, along with training by the Environmental Protection Agency (EP A) and Occupational Safety and Health Administration (OSHA). Work conducted during Phase II included the implementation of an improved potting procedure for the wiring junction. The design of the equipment focused on high-throughput, low-cost operations. During Phase III , First Solar made significant progress in three areas: Manufacturing Readiness; Product Performance; and Environmental, Health, and Safety (EH&S). First Solar's accomplishments in laser scribing significantly exceeded the stated goals. Innovations implemented during Phase III were made possible by adopting a new type of high-frequency, low-pulse-width laser, galvanometer-driven laser-beam system, and numerous advanced, automated, equipment features. Because of the greater than one order of magnitude increase in the throughput and laser life, a factor of two decrease in equipment cost, and complete automation, a major impact on lowering the cost of the PV product is anticipated.

  11. The Organizing and Market Development of a Subcontracting Project to Vietnam : a Developing Export Market for Finland

    OpenAIRE

    Le, Thien

    2010-01-01

    Vietnam is one of the fastest developing countries in the world. Finland and Finnish companies have been doing more and more business in Vietnam in recent years. Understanding the environment and the business culture of the country of the utmost importance before entering the market. The goal of this project was to find a suitable subcontracting partner for the client company and thus to find information about the Vietnamese business culture. This project was carried out for Finpro which ...

  12. Reliability and Validity of the SE-HEPA: Examining Physical Activity- and Healthy Eating-Specific Self-Efficacy among a Sample of Preadolescents

    Science.gov (United States)

    Steele, Michael M.; Burns, Leonard G.; Whitaker, Brandi N.

    2013-01-01

    Objective. The purpose of this study was to examine the psychometric properties of the self-efficacy for healthy eating and physical activity measure (SE-HEPA) for preadolescents. Method. The reliability of the measure was examined to determine if the internal consistency of the measure was adequate (i.e., [alpha]s greater than 0.70). Next, in an…

  13. Reliability Engineering

    CERN Document Server

    Lazzaroni, Massimo

    2012-01-01

    This book gives a practical guide for designers and users in Information and Communication Technology context. In particular, in the first Section, the definition of the fundamental terms according to the international standards are given. Then, some theoretical concepts and reliability models are presented in Chapters 2 and 3: the aim is to evaluate performance for components and systems and reliability growth. Chapter 4, by introducing the laboratory tests, puts in evidence the reliability concept from the experimental point of view. In ICT context, the failure rate for a given system can be

  14. Reliability training

    Science.gov (United States)

    Lalli, Vincent R. (Editor); Malec, Henry A. (Editor); Dillard, Richard B.; Wong, Kam L.; Barber, Frank J.; Barina, Frank J.

    1992-01-01

    Discussed here is failure physics, the study of how products, hardware, software, and systems fail and what can be done about it. The intent is to impart useful information, to extend the limits of production capability, and to assist in achieving low cost reliable products. A review of reliability for the years 1940 to 2000 is given. Next, a review of mathematics is given as well as a description of what elements contribute to product failures. Basic reliability theory and the disciplines that allow us to control and eliminate failures are elucidated.

  15. Validity and reliability of the Physical Activity Questionnaire for Children (PAQ-C) and Adolescents (PAQ-A) in individuals with congenital heart disease

    OpenAIRE

    Voss, Christine; Dean, Paige H.; Gardner, Ross F.; Duncombe, Stephanie L.; Harris, Kevin C.

    2017-01-01

    Objective To assess the criterion validity, internal consistency, reliability and cut-point for the Physical Activity Questionnaire for Children (PAQ-C) and Adolescents (PAQ-A) in children and adolescents with congenital heart disease?a special population at high cardiovascular risk in whom physical activity has not been extensively evaluated. Methods We included 84 participants (13.6?2.9 yrs, 50% female) with simple (37%), moderate (31%), or severe congenital heart disease (27%), as well as ...

  16. Reliability calculations

    International Nuclear Information System (INIS)

    Petersen, K.E.

    1986-03-01

    Risk and reliability analysis is increasingly being used in evaluations of plant safety and plant reliability. The analysis can be performed either during the design process or during the operation time, with the purpose to improve the safety or the reliability. Due to plant complexity and safety and availability requirements, sophisticated tools, which are flexible and efficient, are needed. Such tools have been developed in the last 20 years and they have to be continuously refined to meet the growing requirements. Two different areas of application were analysed. In structural reliability probabilistic approaches have been introduced in some cases for the calculation of the reliability of structures or components. A new computer program has been developed based upon numerical integration in several variables. In systems reliability Monte Carlo simulation programs are used especially in analysis of very complex systems. In order to increase the applicability of the programs variance reduction techniques can be applied to speed up the calculation process. Variance reduction techniques have been studied and procedures for implementation of importance sampling are suggested. (author)

  17. Reliability and validity of psychosocial and environmental correlates measures of physical activity and screen-based behaviors among Chinese children in Hong Kong

    Directory of Open Access Journals (Sweden)

    Salmon Jo

    2011-03-01

    Full Text Available Abstract Background Insufficient participation in physical activity and excessive screen time have been observed among Chinese children. The role of social and environmental factors in shaping physical activity and sedentary behaviors among Chinese children is under-investigated. The purpose of the present study was to assess the reliability and validity of a questionnaire to measure child- and parent-reported psychosocial and environmental correlates of physical activity and screen-based behaviors among Chinese children in Hong Kong. Methods A total of 303 schoolchildren aged 9-14 years and their parents volunteered to participate in this study and 160 of them completed the questionnaire twice within an interval of 10 days. Intraclass correlation coefficients (ICCs, kappa statistics, and percent agreement were performed to evaluate test-retest reliability of the continuous and categorical variables, respectively. Exploratory factor analyses (EFAs were conducted to assess convergent validity of the emergent scales. Cronbach's alpha and ICCs were performed to assess internal and test-retest reliability of the emergent scales. Criterion validity was assessed by correlating psychosocial and environmental measures with self-reported physical activity and screen-based behaviors, measured by a validated questionnaire. Results Reliability statistics for both child- and parent-reported continuous variables showed acceptable consistency for all of the ICC values greater than 0.70. Kappa statistics showed fair to perfect test-retest reliability for the categorical items. Adequate internal consistency and test-retest reliability were observed in most of the emergent scales. Criterion validity assessed by correlating psychosocial and environmental measures with child-reported physical activity found associations with physical activity in the self-efficacy scale (r = 0.25, P r = 0.25, P r = 0.14, P r = -0.22, P r = 0.12, P = 0.053. Conclusions The findings

  18. Systems reliability/structural reliability

    International Nuclear Information System (INIS)

    Green, A.E.

    1980-01-01

    The question of reliability technology using quantified techniques is considered for systems and structures. Systems reliability analysis has progressed to a viable and proven methodology whereas this has yet to be fully achieved for large scale structures. Structural loading variants over the half-time of the plant are considered to be more difficult to analyse than for systems, even though a relatively crude model may be a necessary starting point. Various reliability characteristics and environmental conditions are considered which enter this problem. The rare event situation is briefly mentioned together with aspects of proof testing and normal and upset loading conditions. (orig.)

  19. Reliability of electronic systems

    International Nuclear Information System (INIS)

    Roca, Jose L.

    2001-01-01

    Reliability techniques have been developed subsequently as a need of the diverse engineering disciplines, nevertheless they are not few those that think they have been work a lot on reliability before the same word was used in the current context. Military, space and nuclear industries were the first ones that have been involved in this topic, however not only in these environments it is that it has been carried out this small great revolution in benefit of the increase of the reliability figures of the products of those industries, but rather it has extended to the whole industry. The fact of the massive production, characteristic of the current industries, drove four decades ago, to the fall of the reliability of its products, on one hand, because the massively itself and, for other, to the recently discovered and even not stabilized industrial techniques. Industry should be changed according to those two new requirements, creating products of medium complexity and assuring an enough reliability appropriated to production costs and controls. Reliability began to be integral part of the manufactured product. Facing this philosophy, the book describes reliability techniques applied to electronics systems and provides a coherent and rigorous framework for these diverse activities providing a unifying scientific basis for the entire subject. It consists of eight chapters plus a lot of statistical tables and an extensive annotated bibliography. Chapters embrace the following topics: 1- Introduction to Reliability; 2- Basic Mathematical Concepts; 3- Catastrophic Failure Models; 4-Parametric Failure Models; 5- Systems Reliability; 6- Reliability in Design and Project; 7- Reliability Tests; 8- Software Reliability. This book is in Spanish language and has a potentially diverse audience as a text book from academic to industrial courses. (author)

  20. An Examination of the Reliability and Factor Structure of the Physical Activity Scale for Individuals With Physical Disabilities (PASIPD) Among Individuals Living With Parkinson's Disease.

    Science.gov (United States)

    Jimenez-Pardo, J; Holmes, J D; Jenkins, M E; Johnson, A M

    2015-07-01

    Physical activity is generally thought to be beneficial to individuals with Parkinson's disease (PD). There is, however, limited information regarding current rates of physical activity among individuals with PD, possibly due to a lack of well-validated measurement tools. In the current study we sampled 63 individuals (31 women) living with PD between the ages of 52 and 87 (M = 70.97 years, SD = 7.53), and evaluated the amount of physical activity in which they engaged over a 7-day period using a modified form of the Physical Activity Scale for Individuals with Physical Disabilities (PASIPD). The PASIPD was demonstrated to be a reliable measure within this population, with three theoretically defensible factors: (1) housework and home-based outdoor activities; (2) recreational and fitness activities; and (3) occupational activities. These results suggest that the PASIPD may be useful for monitoring physical activity involvement among individuals with PD, particularly within large-scale questionnaire-based studies.

  1. Mesoscale Modeling of Kinetic Phase Behaviors in Mg-B-H (Subcontract Report)

    Energy Technology Data Exchange (ETDEWEB)

    Yu, H. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Thornton, K. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Wood, B. C. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2017-10-13

    Storage of hydrogen on board vehicles is one of the critical enabling technologies for creating hydrogenfueled transportation systems that can reduce oil dependency and mitigate the long-term effects of fossil fuels on climate change. Stakeholders in developing hydrogen infrastructure are currently focused on highpressure storage at 350 bar and 700 bar, in part because no viable solid-phase storage material has emerged. Nevertheless, solid-state materials, including high-density hydrides, remain of interest because of their unique potential to meet all DOE targets and deliver hydrogen at lower pressures and higher on-board densities. A successful solution would significantly reduce costs and ensure the economic viability of a U.S. hydrogen infrastructure. The Mg(BH4)2-MgB2 system represents a highly promising solution because of its reasonable reaction enthalpy, high intrinsic capacity, and demonstrated reversibility, yet suffers from poor reaction kinetics. This subcontract aims to deliver a phase-field model for the kinetics of the evolution of the relevant phases within the Mg-B-H system during hydrogenation and dehydrogenation. This model will be used within a broader theory, synthesis, and characterization framework to study the properties of geometry-selected nanoparticles of pristine and doped MgB2/Mg(BH4)2 with two aims: (1) understand the intrinsic limitations in (de)hydrogenation; (2) devise strategies for improving thermodynamics and kinetics through nanostructuring.

  2. Validity and reliability of the Baecke questionnaire for the evaluation of habitual physical activity among people living with HIV/AIDS

    Directory of Open Access Journals (Sweden)

    Florindo Alex Antonio

    2006-01-01

    Full Text Available This study evaluates the validity and reliability of the Baecke questionnaire on habitual physical activity when applied to a population of HIV/AIDS subjects. Validity was determined by comparing measurements for 30 subjects of peak oxygen uptake, peak workload, and energy expenditure with scores for occupational physical activity (OPA, physical exercise in leisure (PEL, leisure and locomotion activities (LLA, and total score (TS. Reliability was determined by testing and retesting 29 subjects at intervals of 15-30 days. Validity was evaluated with the Pearson correlation and reliability analyses were done using the intraclass correlation, paired Student t-test, and Bland-Altman methods. Peak VO2 and peak workload had significant correlation with PEL (r = 0.41; r = 0.43; respectively. Energy expenditure had a significant correlation with OPA (r = 0.64. The intraclass coefficients were 0.70 or more for OPA, PEL and TS. There was no difference in OPA, PEL, LLA and TS between the two evaluations. The Bland-Altman methods showed that there was good agreement between the measurements for all habitual physical activities scores. Results show that the Baecke questionnaire is valid for the evaluation of habitual physical activity among people living with HIV/AIDS.

  3. Microelectronics Reliability

    Science.gov (United States)

    2017-01-17

    inverters  connected in a chain. ................................................. 5  Figure 3  Typical graph showing frequency versus square root of...developing an experimental  reliability estimating methodology that could both illuminate the  lifetime  reliability of advanced devices,  circuits and...or  FIT of the device. In other words an accurate estimate of the device  lifetime  was found and thus the  reliability  that  can  be  conveniently

  4. An investigation into the minimum accelerometry wear time for reliable estimates of habitual physical activity and definition of a standard measurement day in pre-school children.

    Science.gov (United States)

    Hislop, Jane; Law, James; Rush, Robert; Grainger, Andrew; Bulley, Cathy; Reilly, John J; Mercer, Tom

    2014-11-01

    The purpose of this study was to determine the number of hours and days of accelerometry data necessary to provide a reliable estimate of habitual physical activity in pre-school children. The impact of a weekend day on reliability estimates was also determined and standard measurement days were defined for weekend and weekdays.Accelerometry data were collected from 112 children (60 males, 52 females, mean (SD) 3.7 (0.7)yr) over 7 d. The Spearman-Brown Prophecy formula (S-B prophecy formula) was used to predict the number of days and hours of data required to achieve an intraclass correlation coefficient (ICC) of 0.7. The impact of including a weekend day was evaluated by comparing the reliability coefficient (r) for any 4 d of data with data for 4 d including one weekend day.Our observations indicate that 3 d of accelerometry monitoring, regardless of whether it includes a weekend day, for at least 7 h  d(-1) offers sufficient reliability to characterise total physical activity and sedentary behaviour of pre-school children. These findings offer an approach that addresses the underlying tension in epidemiologic surveillance studies between the need to maintain acceptable measurement rigour and retention of a representatively meaningful sample size.

  5. Concurrent validity and interrater reliability of a new smartphone application to assess 3D active cervical range of motion in patients with neck pain.

    Science.gov (United States)

    Stenneberg, Martijn S; Busstra, Harm; Eskes, Michel; van Trijffel, Emiel; Cattrysse, Erik; Scholten-Peeters, Gwendolijne G M; de Bie, Rob A

    2018-04-01

    There is a lack of valid, reliable, and feasible instruments for measuring planar active cervical range of motion (aCROM) and associated 3D coupling motions in patients with neck pain. Smartphones have advanced sensors and appear to be suitable for these measurements. To estimate the concurrent validity and interrater reliability of a new iPhone application for assessing planar aCROM and associated 3D coupling motions in patients with neck pain, using an electromagnetic tracking device as a reference test. Cross-sectional study. Two samples of neck pain patients were recruited; 30 patients for the validity study and 26 patients for the reliability study. Validity was estimated using intraclass correlation coefficients (ICCs), and by calculating 95% limits of agreement (LoA). To estimate interrater reliability, ICCs were calculated. Cervical 3D coupling motions were analyzed by calculating the cross-correlation coefficients and ratio between the main motions and coupled motions for both instruments. ICCs for concurrent validity and interrater reliability ranged from 0.90 to 0.99. The width of the 95% LoA ranged from about 5° for right lateral bending to 11° for total rotation. No significant differences were found between both devices for associated coupling motion analysis. The iPhone application appears to be a useful discriminative tool for the measurement of planar aCROM and associated coupling motions in patients with neck pain. It fulfills the need for a valid, reliable, and feasible instrument in clinical practice and research. Therapists and researchers should consider measurement error when interpreting scores. Copyright © 2017 Elsevier Ltd. All rights reserved.

  6. Structural systems reliability analysis

    International Nuclear Information System (INIS)

    Frangopol, D.

    1975-01-01

    For an exact evaluation of the reliability of a structure it appears necessary to determine the distribution densities of the loads and resistances and to calculate the correlation coefficients between loads and between resistances. These statistical characteristics can be obtained only on the basis of a long activity period. In case that such studies are missing the statistical properties formulated here give upper and lower bounds of the reliability. (orig./HP) [de

  7. Quantification of colour Doppler activity in the wrist in patients with rheumatoid arthritis - the reliability of different methods for image selection and evaluation

    DEFF Research Database (Denmark)

    Ellegaard, K.; Torp-Pedersen, S.; Lund, H.

    2008-01-01

    measurements in the wrist of patients with rheumatoid arthritis (RA) using different selection and quantification methods. Materials and Methods: 14 patients with RA had their wrist scanned twice by the same investigator with an interval of 30 Minutes, The images for analysis were selected either......Purpose: The amount Of colour Doppler activity in the inflamed synovium is used to quantity inflammatory activity. The measurements may vary due to image selection, quantification method, and point in cardiac cycle. This study investigated the test-retest reliability Of ultrasound colour Doppler...... was obtained when the images were selected guided by colour Doppler and the Subsequent quantification was (done in an area defined by anatomical Structures. With this method, the intra-class coefficient ICC (2.1) was 0.95 and the within-subject SD (SW) was 0.017, indicating good reliability. In contrast, poor...

  8. A Time-Variant Reliability Model for Copper Bending Pipe under Seawater-Active Corrosion Based on the Stochastic Degradation Process

    Directory of Open Access Journals (Sweden)

    Bo Sun

    2018-03-01

    Full Text Available In the degradation process, the randomness and multiplicity of variables are difficult to describe by mathematical models. However, they are common in engineering and cannot be neglected, so it is necessary to study this issue in depth. In this paper, the copper bending pipe in seawater piping systems is taken as the analysis object, and the time-variant reliability is calculated by solving the interference of limit strength and maximum stress. We did degradation experiments and tensile experiments on copper material, and obtained the limit strength at each time. In addition, degradation experiments on copper bending pipe were done and the thickness at each time has been obtained, then the response of maximum stress was calculated by simulation. Further, with the help of one kind of Monte Carlo method we propose, the time-variant reliability of copper bending pipe was calculated based on the stochastic degradation process and interference theory. Compared with traditional methods and verified by maintenance records, the results show that the time-variant reliability model based on the stochastic degradation process proposed in this paper has better applicability in the reliability analysis, and it can be more convenient and accurate to predict the replacement cycle of copper bending pipe under seawater-active corrosion.

  9. Redefining reliability

    International Nuclear Information System (INIS)

    Paulson, S.L.

    1995-01-01

    Want to buy some reliability? The question would have been unthinkable in some markets served by the natural gas business even a few years ago, but in the new gas marketplace, industrial, commercial and even some residential customers have the opportunity to choose from among an array of options about the kind of natural gas service they need--and are willing to pay for. The complexities of this brave new world of restructuring and competition have sent the industry scrambling to find ways to educate and inform its customers about the increased responsibility they will have in determining the level of gas reliability they choose. This article discusses the new options and the new responsibilities of customers, the needed for continuous education, and MidAmerican Energy Company's experiment in direct marketing of natural gas

  10. The NASA Plan: To award eight percent of prime and subcontracts to socially and economically disadvantaged businesses

    Science.gov (United States)

    1990-01-01

    It is NASA's intent to provide small disadvantaged businesses, including women-owned, historically black colleges and universities and minority education institutions the maximum practicable opportunity to receive a fair proportion of NASA prime and subcontracted awards. Annually, NASA will establish socioeconomic procurement goals including small disadvantaged business goals, with a target of reaching the eight percent level by the end of FY 1994. The NASA Associate Administrators, who are responsible for the programs at the various NASA Centers, will be held accountable for full implementation of the socioeconomic procurement plans. Various aspects of this plan, including its history, are discussed.

  11. Comparing the Psychometric Properties of Two Physical Activity Self-Efficacy Instruments in Urban, Adolescent Girls: Validity, Measurement Invariance, and Reliability

    Science.gov (United States)

    Voskuil, Vicki R.; Pierce, Steven J.; Robbins, Lorraine B.

    2017-01-01

    Aims: This study compared the psychometric properties of two self-efficacy instruments related to physical activity. Factorial validity, cross-group and longitudinal invariance, and composite reliability were examined. Methods: Secondary analysis was conducted on data from a group randomized controlled trial investigating the effect of a 17-week intervention on increasing moderate to vigorous physical activity among 5th–8th grade girls (N = 1,012). Participants completed a 6-item Physical Activity Self-Efficacy Scale (PASE) and a 7-item Self-Efficacy for Exercise Behaviors Scale (SEEB) at baseline and post-intervention. Confirmatory factor analyses for intervention and control groups were conducted with Mplus Version 7.4 using robust weighted least squares estimation. Model fit was evaluated with the chi-square index, comparative fit index, and root mean square error of approximation. Composite reliability for latent factors with ordinal indicators was computed from Mplus output using SAS 9.3. Results: Mean age of the girls was 12.2 years (SD = 0.96). One-third of the girls were obese. Girls represented a diverse sample with over 50% indicating black race and an additional 19% identifying as mixed or other race. Both instruments demonstrated configural invariance for simultaneous analysis of cross-group and longitudinal invariance based on alternative fit indices. However, simultaneous metric invariance was not met for the PASE or the SEEB instruments. Partial metric invariance for the simultaneous analysis was achieved for the PASE with one factor loading identified as non-invariant. Partial metric invariance was not met for the SEEB. Longitudinal scalar invariance was achieved for both instruments in the control group but not the intervention group. Composite reliability for the PASE ranged from 0.772 to 0.842. Reliability for the SEEB ranged from 0.719 to 0.800 indicating higher reliability for the PASE. Reliability was more stable over time in the control

  12. Did Geomagnetic Activity Challenge Electric Power Reliability During Solar Cycle 23? Evidence from the PJM Regional Transmission Organization in North America

    Science.gov (United States)

    Forbes, Kevin F.; Cyr, Chris St

    2012-01-01

    During solar cycle 22, a very intense geomagnetic storm on 13 March 1989 contributed to the collapse of the Hydro-Quebec power system in Canada. This event clearly demonstrated that geomagnetic storms have the potential to lead to blackouts. This paper addresses whether geomagnetic activity challenged power system reliability during solar cycle 23. Operations by PJM Interconnection, LLC (hereafter PJM), a regional transmission organization in North America, are examined over the period 1 April 2002 through 30 April 2004. During this time PJM coordinated the movement of wholesale electricity in all or parts of Delaware, Maryland, New Jersey, Ohio, Pennsylvania, Virginia, West Virginia, and the District of Columbia in the United States. We examine the relationship between a proxy of geomagnetically induced currents (GICs) and a metric of challenged reliability. In this study, GICs are proxied using magnetometer data from a geomagnetic observatory located just outside the PJM control area. The metric of challenged reliability is the incidence of out-of-economic-merit order dispatching due to adverse reactive power conditions. The statistical methods employed make it possible to disentangle the effects of GICs on power system operations from purely terrestrial factors. The results of the analysis indicate that geomagnetic activity can significantly increase the likelihood that the system operator will dispatch generating units based on system stability considerations rather than economic merit.

  13. Reliability of the SF-36 in Japanese patients with systemic lupus erythematosus and its associations with disease activity and damage: a two-consecutive year prospective study.

    Science.gov (United States)

    Baba, S; Katsumata, Y; Okamoto, Y; Kawaguchi, Y; Hanaoka, M; Kawasumi, H; Yamanaka, H

    2018-03-01

    We aimed to validate the reliability of the Medical Outcomes Study Short Form-36 (SF-36) among Japanese patients with systemic lupus erythematosus (SLE). Japanese patients with SLE ( n = 233) completed the SF-36 and other related demographic questionnaires, and physicians simultaneously completed the SLE Disease Activity Index 2000 (SLEDAI-2K) and the Systemic Lupus International Collaborating Clinics Damage Index (SDI). Patients were prospectively followed for a repeat assessment the following year. The SF-36 subscales demonstrated acceptable internal consistency (Cronbach's α of 0.85-0.89), and an overall good test-retest reliability (intraclass correlation coefficient >0.70). The average baseline SF-36 subscale/summary scores except for "bodily pain" were significantly lower than those of the Japanese general population ( p 36 subscale/summary scores except for "vitality" and "mental component summary" at baseline, whereas the SLEDAI-2K did not. In the second year, "social functioning" and "mental component summary" of the SF-36 deteriorated among patients whose SDI or SLEDAI-2K score increased (effect sizes 36 demonstrated acceptable reliability among Japanese patients with SLE. Health-related quality of life measured by the SF-36 was reduced in Japanese patients with SLE and associated with disease damage, rather than disease activity.

  14. Reliability and validity of the German short version of the Activities specific Balance Confidence (ABC-D6) scale in older adults.

    Science.gov (United States)

    Schott, Nadja

    2014-01-01

    The Activities specific Balance Confidence (ABC) is a questionnaire which was developed to assess falls-associated self-efficacy. The aim of this study was to evaluate reliability and validity of the German abbreviated 6-item version of the ABC scores in community-dwelling older people. The study sample included 384 subjects (age 71.1 ± 9.7). In order to determine the psychometric properties, reliability and validity were assessed through administration of the German adaptation of the ABC-D16 to participants twice, 10 days apart, and comparison of the ABC-D16 and the ABC-D6 with functional measures of balance and mobility (one-leg stance; 10 m walk; TUG; Fullerton Advanced Balance Scale (FAB)), physical activity (Physical Activity Scale for the Elderly (PASE)), physical fitness (30s arm curl, 30s chair stand, 6 min walk), cognition (Trail-Making-Test (TMT)), falls status, and quality of life (SF36). Factor analyses suggested a 1-factor solution for the ABC-D6 scale (explained variance 79.8%). Internal consistency (.95) and test-retest reliability (.98) for the ABC-D6 scores were excellent. Scores on the ABC-D6 were significantly lower than on the ABC-D16, but ABC-D16 and ABC-D6 scores were highly correlated (.94). There was an increasing difference in the ABC-scores between men and women with increasing age. Fallers reported lower balance confidence than non-fallers. The ABC-D6 score significantly correlated with functional measures of balance and mobility, physical activity, physical fitness, cognition, and quality of life (-.698valid instrument to asses falls-associated self-efficacy and may be used in future research projects and clinical trials. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

  15. Recommendations for Assessment of the Reliability, Sensitivity, and Validity of Data Provided by Wearable Sensors Designed for Monitoring Physical Activity.

    Science.gov (United States)

    Düking, Peter; Fuss, Franz Konstantin; Holmberg, Hans-Christer; Sperlich, Billy

    2018-04-30

    Although it is becoming increasingly popular to monitor parameters related to training, recovery, and health with wearable sensor technology (wearables), scientific evaluation of the reliability, sensitivity, and validity of such data is limited and, where available, has involved a wide variety of approaches. To improve the trustworthiness of data collected by wearables and facilitate comparisons, we have outlined recommendations for standardized evaluation. We discuss the wearable devices themselves, as well as experimental and statistical considerations. Adherence to these recommendations should be beneficial not only for the individual, but also for regulatory organizations and insurance companies. ©Peter Düking, Franz Konstantin Fuss, Hans-Christer Holmberg, Billy Sperlich. Originally published in JMIR Mhealth and Uhealth (http://mhealth.jmir.org), 30.04.2018.

  16. Validity and reliability of the Physical Activity Questionnaire for Children (PAQ-C) and Adolescents (PAQ-A) in individuals with congenital heart disease.

    Science.gov (United States)

    Voss, Christine; Dean, Paige H; Gardner, Ross F; Duncombe, Stephanie L; Harris, Kevin C

    2017-01-01

    To assess the criterion validity, internal consistency, reliability and cut-point for the Physical Activity Questionnaire for Children (PAQ-C) and Adolescents (PAQ-A) in children and adolescents with congenital heart disease-a special population at high cardiovascular risk in whom physical activity has not been extensively evaluated. We included 84 participants (13.6±2.9 yrs, 50% female) with simple (37%), moderate (31%), or severe congenital heart disease (27%), as well as cardiac transplant recipients (6%), from BC Children's Hospital, Canada. They completed the PAQ-C (≤11yrs, n = 28) or-A (≥12yrs, n = 56), and also wore a triaxial accelerometer (GT3X+ or GT9X) over the right hip for 7 days (n = 59 met valid wear time criteria). Median daily moderate-to-vigorous physical activity was 46.9 minutes per day (IQR 31.6-61.8) and 25% met physical activity guidelines defined as ≥60 minutes of moderate-to-vigorous physical activity per day. Median PAQ-score was 2.6 (IQR 1.9-3.0). PAQ-Scores were significantly related to accelerometry-derived metrics of physical activity (rho = 0.44-0.55, all pPAQ-Scores over a 4-months period (ICC = 0.73, 95%CI 0.55-0.84; pPAQ-Score cut-point of 2.87 discriminates between those meeting physical guidelines and those that do not in the combined PAQ-C and-A samples (area under the curve = 0.80 (95%CI 0.67-0.92). Validity and reliability of the PAQ in children and adolescents with CHD was comparable to or stronger than previous studies in healthy children. Therefore, the PAQ may be used to estimate general levels of physical activity in children and adolescents with CHD.

  17. Reliability of the Danish version of the short questionnaire to assess health-enhancing physical activity (SQUASH)

    DEFF Research Database (Denmark)

    Jacobsen, Julie Sandell; Sørensen, Lotte; Mikkelsen, Lone Ramer

    2016-01-01

    Background: There is abundant evidence that physical activity has a fundamental role in the prevention and treatment of chronic disease. Questionnaires are simple and inexpensive to apply to measure physical activity. Purpose / Aim of Study: Translate and cross-cultural adapt the short questionna...

  18. High reliable and stable organic field-effect transistor nonvolatile memory with a poly(4-vinyl phenol) charge trapping layer based on a pn-heterojunction active layer

    Energy Technology Data Exchange (ETDEWEB)

    Xiang, Lanyi; Ying, Jun; Han, Jinhua; Zhang, Letian, E-mail: zlt@jlu.edu.cn, E-mail: wwei99@jlu.edu.cn; Wang, Wei, E-mail: zlt@jlu.edu.cn, E-mail: wwei99@jlu.edu.cn [State Key Laboratory on Integrated Optoelectronics, College of Electronic Science and Engineering, Jilin University, 2699 Qianjin Street, Changchun 130012 (China)

    2016-04-25

    In this letter, we demonstrate a high reliable and stable organic field-effect transistor (OFET) based nonvolatile memory (NVM) with a polymer poly(4-vinyl phenol) (PVP) as the charge trapping layer. In the unipolar OFETs, the inreversible shifts of the turn-on voltage (V{sub on}) and severe degradation of the memory window (ΔV{sub on}) at programming (P) and erasing (E) voltages, respectively, block their application in NVMs. The obstacle is overcome by using a pn-heterojunction as the active layer in the OFET memory, which supplied a holes and electrons accumulating channel at the supplied P and E voltages, respectively. Both holes and electrons transferring from the channels to PVP layer and overwriting the trapped charges with an opposite polarity result in the reliable bidirectional shifts of V{sub on} at P and E voltages, respectively. The heterojunction OFET exhibits excellent nonvolatile memory characteristics, with a large ΔV{sub on} of 8.5 V, desired reading (R) voltage at 0 V, reliable P/R/E/R dynamic endurance over 100 cycles and a long retention time over 10 years.

  19. An Introduction To Reliability

    International Nuclear Information System (INIS)

    Park, Kyoung Su

    1993-08-01

    This book introduces reliability with definition of reliability, requirement of reliability, system of life cycle and reliability, reliability and failure rate such as summary, reliability characteristic, chance failure, failure rate which changes over time, failure mode, replacement, reliability in engineering design, reliability test over assumption of failure rate, and drawing of reliability data, prediction of system reliability, conservation of system, failure such as summary and failure relay and analysis of system safety.

  20. Mathematical reliability an expository perspective

    CERN Document Server

    Mazzuchi, Thomas; Singpurwalla, Nozer

    2004-01-01

    In this volume consideration was given to more advanced theoretical approaches and novel applications of reliability to ensure that topics having a futuristic impact were specifically included. Topics like finance, forensics, information, and orthopedics, as well as the more traditional reliability topics were purposefully undertaken to make this collection different from the existing books in reliability. The entries have been categorized into seven parts, each emphasizing a theme that seems poised for the future development of reliability as an academic discipline with relevance. The seven parts are networks and systems; recurrent events; information and design; failure rate function and burn-in; software reliability and random environments; reliability in composites and orthopedics, and reliability in finance and forensics. Embedded within the above are some of the other currently active topics such as causality, cascading, exchangeability, expert testimony, hierarchical modeling, optimization and survival...

  1. Ultrasonographic assessment of tendon thickness, Doppler activity and bony spurs of the elbow in patients with lateral epicondylitis and healthy subjects: a reliability and agreement study.

    Science.gov (United States)

    Krogh, T P; Fredberg, U; Christensen, R; Stengaard-Pedersen, K; Ellingsen, T

    2013-10-01

    Tennis elbow, also known as lateral epicondylitis (LE), is a common disorder often assessed by ultrasound. The aim of this study was to evaluate the ultrasonographic outcomes and methods used in LE research and clinical practice. This study was designed as an intra- and interobserver reliability and agreement study. Ultrasonographic examination of the common extensor tendon of the elbow was performed. The intraobserver study examined tendon thickness twice in 20 right elbows from 20 healthy individuals at an interval of 7 to 12 days. The interobserver study examined tendon thickness, color Doppler activity, and bony spurs in 18 right elbows in 9 healthy individuals and 9 patients with LE. Two trained rheumatologists performed the interobserver examinations with the same scanner on the same day. The main outcomes were intra- and interclass correlation (ICC) and agreement. In the intraobserver study, the ICC with regard to tendon thickness ranged from 0.76 to 0.81, depending on the measurement techniques used. The agreement ranged from 0.06 to 0.13 mm. In the interobserver study, the tendon thickness ICC ranged from 0.45 to 0.65 and the agreement ranged from -0.17 to 0.13 mm. The ICC for color Doppler activity was 0.93, with agreement in 14/18 (78 %) of the cases. A perfect reliability was demonstrated for bony spurs, with an ICC of 1 and exact agreement in 18/18 (100 %) of the cases. Good to excellent reliability was obtained for all measurements. The ultrasonographic techniques evaluated in this trial can be recommended for use in both research and clinical practice. © Georg Thieme Verlag KG Stuttgart · New York.

  2. alfa-Amylase as a reliable and convenient measure of sympathetic activity: don’t start salivating just yet!

    NARCIS (Netherlands)

    Bosch, JA; Veerman, J.W.; de Geus, E.J.C.; Proctor, J.

    2011-01-01

    Recent years have seen a growing interest in salivary α-amylase (sAA) as a non-invasive marker for sympathetic nervous system (SNS) activity. Saliva offers many advantages as a biomarker fluid and sAA is one of its most plentiful components. sAA is a digestive enzyme that breaks down starch, which

  3. α-Amylase as a reliable and convenient measure of sympathetic activity: don't start salivating just yet!

    NARCIS (Netherlands)

    Bosch, J.A.; Veerman, E.C.I.; de Geus, E.J.; Proctor, G.B.

    2011-01-01

    Recent years have seen a growing interest in salivary α-amylase (sAA) as a non-invasive marker for sympathetic nervous system (SNS) activity. Saliva offers many advantages as a biomarker fluid and sAA is one of its most plentiful components. sAA is a digestive enzyme that breaks down starch, which

  4. International Space Station Active Thermal Control Sub-System On-Orbit Pump Performance and Reliability Using Liquid Ammonia as a Coolant

    Science.gov (United States)

    Morton, Richard D.; Jurick, Matthew; Roman, Ruben; Adamson, Gary; Bui, Chinh T.; Laliberte, Yvon J.

    2011-01-01

    The International Space Station (ISS) contains two Active Thermal Control Sub-systems (ATCS) that function by using a liquid ammonia cooling system collecting waste heat and rejecting it using radiators. These subsystems consist of a number of heat exchangers, cold plates, radiators, the Pump and Flow Control Subassembly (PFCS), and the Pump Module (PM), all of which are Orbital Replaceable Units (ORU's). The PFCS provides the motive force to circulate the ammonia coolant in the Photovoltaic Thermal Control Subsystem (PVTCS) and has been in operation since December, 2000. The Pump Module (PM) circulates liquid ammonia coolant within the External Active Thermal Control Subsystem (EATCS) cooling the ISS internal coolant (water) loops collecting waste heat and rejecting it through the ISS radiators. These PM loops have been in operation since December, 2006. This paper will discuss the original reliability analysis approach of the PFCS and Pump Module, comparing them against the current operational performance data for the ISS External Thermal Control Loops.

  5. Final Report for Subcontract B541028,Pore-Scale Modeling to Support 'Pore Connectivity' Research Work

    International Nuclear Information System (INIS)

    Ewing, R.P.

    2008-01-01

    the proposal, the then-current long-term simulations used estimated diffusivity values for the rock surrounding the repository. But other gaps, both data and conceptual, also informed our investigation: (1) What is the relationship between the diffusion coefficient measured at one scale, to that measured or observed at a different scale? In classical materials this relationship is trivial; in low-connectivity materials it is not. (2) Is the measured diffusivity insensitive to the shape of the sample? Again, in classical materials there should be no sample shape effect. (3) Does sorption affect diffusive exchange in low-connectivity media differently than in classical media? (4) What is the effect of matrix saturation on the effective diffusivity? Is it different for low-connectivity media than for classical media? What levels of matrix saturation are actually encountered at Yucca Mountain? (5) In addition to changing the matrix saturation (and thereby the diffusion coefficient), the wetting/drying cycles drive water into, then out of the matrix. How do these mass flow cycles affect the long-term exchange of solutes between the fracture and the matrix? Can it be treated as a simple increase in effective diffusivity? Is it a local or a global effect? Is the effect different in low-connectivity media? The modeling portion of this project--this subcontract--primarily focused on how diffusion varies with pore connectivity. In broad terms, the experimental work connected the work to specifics of the YMP, while the modeling work connected the experimental work to theory

  6. Reliability and validity of Web-SPAN, a web-based method for assessing weight status, diet and physical activity in youth.

    Science.gov (United States)

    Storey, K E; McCargar, L J

    2012-02-01

    Web-based surveys are becoming increasing popular. The present study aimed to assess the reliability and validity of the Web-Survey of Physical Activity and Nutrition (Web-SPAN) for self-report of height and weight, diet and physical activity by youth. School children aged 11-15years (grades 7-9; n=459) participated in the school-based research (boys, n=225; girls, n=233; mean age, 12.8years). Students completed Web-SPAN (self-administered) twice and participated in on-site school assessments [height, weight, 3-day food/pedometer record, Physical Activity Questionnaire for Older Children (PAQ-C), shuttle run]. Intraclass (ICC) and Pearson's correlation coefficients and paired samples t-tests were used to assess the test-retest reliability of Web-SPAN and to compare Web-SPAN with the on-site assessments. Test-retest reliability for height (ICC=0.90), weight (ICC=0.98) and the PAQ-C (ICC=0.79) were highly correlated, whereas correlations for nutrients were not as strong (ICC=0.37-0.64). There were no differences between Web-SPAN times 1 and 2 for height and weight, although there were differences for the PAQ-C and most nutrients. Web-SPAN was strongly correlated with the on-site assessments, including height (ICC=0.88), weight (ICC=0.93) and the PAQ-C (ICC=0.70). Mean differences for height and the PAQ-C were not significant, whereas mean differences for weight were significant resulting in an underestimation of being overweight/obesity prevalence (84% agreement). Correlations for nutrients were in the range 0.24-0.40; mean differences were small but generally significantly different. Correlations were weak between the web-based PAQ-C and 3-day pedometer record (r=0.28) and 20-m shuttle run (r=0.28). Web-SPAN is a time- and cost-effective method that can be used to assess the diet and physical activity status of youth in large cross-sectional studies and to assess group trends (weight status). © 2011 The Authors. Journal of Human Nutrition and Dietetics © 2011 The

  7. ThermoPoD: A reliability study on active infrared thermography for the inspection of composite materials

    Energy Technology Data Exchange (ETDEWEB)

    Duan, Yuxia [Beijing Univ. of Aeronautics and Astronautics, Beijing (China); Ibarra-Castanedo, Clemente; Maldague, Xavier P. V. [Univ. Laval, Quebec (Canada); Servais, Pierre; Genest, Marc [National Research Council Canada, Ottawa (Canada)

    2012-07-15

    In this study, a Probability of Detection (PoD) experimental study was carried out in the framework of a Belgian-Quebec/Canada collaborative research project called ThermoPoD. Experiments were implemented on a Carbon Fiber Reinforced Plastic (CFRP) specimen with embedded material simulating delamination. For active infrared thermography, different heating sources (optical or ultrasound), heating forms (pulsed or lock-in), and data processing methods, such as Fourier Transform, Thermal Signal Reconstruction, Wavelet Transform, Differential Absolute Contrast, and Principal Component Thermography are of interest. In the present study, the effects of various data processing methods on PoD curves are compared.

  8. High Volume Manufacturing of Silicon-Film Solar Cells and Modules; Final Subcontract Report, 26 February 2003 - 30 September 2003

    Energy Technology Data Exchange (ETDEWEB)

    Rand, J. A.; Culik, J. S.

    2005-10-01

    The objective of the PV Manufacturing R&D subcontract was to continue to improve AstroPower's technology for manufacturing Silicon-Film* wafers, solar cells, and modules to reduce costs, and increase production yield, throughput, and capacity. As part of the effort, new technology such as the continuous back metallization screen-printing system and the laser scribing system were developed and implemented. Existing processes, such as the silicon nitride antireflection coating system and the fire-through process were optimized. Improvements were made to the statistical process control (SPC) systems of the major manufacturing processes: feedstock preparation, wafer growth, surface etch, diffusion, and the antireflection coating process. These process improvements and improved process control have led to an increase of 5% relative power, and nearly 15% relative improvement in mechanical and visual yield.

  9. Monitoring of ovarian activity by measurement of urinary excretion rates of estrone glucuronide and pregnanediol glucuronide using the Ovarian Monitor, Part II: reliability of home testing.

    Science.gov (United States)

    Blackwell, Leonard F; Vigil, Pilar; Gross, Barbara; d'Arcangues, Catherine; Cooke, Delwyn G; Brown, James B

    2012-02-01

    The UNDP/WHO/World Bank/Special Programme of Research, Development and Research Training in Human Reproduction (Geneva) set up a study to determine whether it is feasible for women to monitor their ovarian activity reliably by home testing. Daily self-monitoring of urinary hormone metabolites for menstrual cycle assessment was evaluated by comparison of results obtained with the Home Ovarian Monitor by untrained users both at home and in study centres. Women collected daily data for urinary estrone glucuronide (E1G) and pregnanediol glucuronide (PdG) for two cycles, then the procedure was repeated in the women's local centre (in Chile, Australia or New Zealand) giving a total of 113 duplicate cycles. The tests were performed without the benefit of replicates or quality controls. The home and centre cycles were normalized and compared to identify assay errors, and the resulting home and centre menstrual cycle profiles were averaged. Reliable mean cycle profiles were obtained with the home and centre excretion rates agreeing to within 36 ± 21 nmol/24 h for E1G and 0.77 ± 0.28 µmol/24 h for baseline PdG values (1-5 µmol/24 h). The cycles had a mean length of 28.1 ± 3.1 days (n = 112; 5th and 95th percentiles: 24 and 35 days, respectively), a mean follicular phase of 14.8 ± 3.1 days (n = 107; 5th and 95th percentiles: 11 and 21 days) and a mean luteal phase length of 13.3 ± 1.5 days (n = 106; 5th and 95th percentiles: 11 and 17 days), calculated from the day of the LH peak. The study confirmed that the Ovarian Monitor pre-coated assay tubes worked well even in the hands of lay users, without standard curves, quality controls or replicates. Point-of-care monitoring to give reliable fertility data is feasible.

  10. Reliable fuzzy H∞ control for active suspension of in-wheel motor driven electric vehicles with dynamic damping

    Science.gov (United States)

    Shao, Xinxin; Naghdy, Fazel; Du, Haiping

    2017-03-01

    A fault-tolerant fuzzy H∞ control design approach for active suspension of in-wheel motor driven electric vehicles in the presence of sprung mass variation, actuator faults and control input constraints is proposed. The controller is designed based on the quarter-car active suspension model with a dynamic-damping-in-wheel-motor-driven-system, in which the suspended motor is operated as a dynamic absorber. The Takagi-Sugeno (T-S) fuzzy model is used to model this suspension with possible sprung mass variation. The parallel-distributed compensation (PDC) scheme is deployed to derive a fault-tolerant fuzzy controller for the T-S fuzzy suspension model. In order to reduce the motor wear caused by the dynamic force transmitted to the in-wheel motor, the dynamic force is taken as an additional controlled output besides the traditional optimization objectives such as sprung mass acceleration, suspension deflection and actuator saturation. The H∞ performance of the proposed controller is derived as linear matrix inequalities (LMIs) comprising three equality constraints which are solved efficiently by means of MATLAB LMI Toolbox. The proposed controller is applied to an electric vehicle suspension and its effectiveness is demonstrated through computer simulation.

  11. RELIABLE IDENTIFICATIONS OF ACTIVE GALACTIC NUCLEI FROM THE WISE, 2MASS, AND ROSAT ALL-SKY SURVEYS

    International Nuclear Information System (INIS)

    Edelson, R.; Malkan, M.

    2012-01-01

    We have developed the ''S IX '' statistic to identify bright, highly likely active galactic nucleus (AGN) candidates solely on the basis of Wide-field Infrared Survey Explorer (WISE), Two Micron All-Sky Survey (2MASS), and ROSAT all-sky survey (RASS) data. This statistic was optimized with data from the preliminary WISE survey and the Sloan Digital Sky Survey, and tested with Lick 3 m Kast spectroscopy. We find that sources with S IX 95% likelihood of being an AGN (defined in this paper as a Seyfert 1, quasar, or blazar). This statistic was then applied to the full WISE/2MASS/RASS dataset, including the final WISE data release, to yield the ''W2R'' sample of 4316 sources with S IX 2 , permitting construction of AGN samples in any sufficiently large region of sky.

  12. Reliability measures of a computer system with priority to PM over the H/W repair activities subject to MOT and MRT

    Directory of Open Access Journals (Sweden)

    Ashish Kumar

    2015-01-01

    Full Text Available This paper concentrates on the evaluation of reliability measures of a computer system of two-identical units having independent failure of h/w and s/w components. Initially one unit is operative and the other is kept as spare in cold standby. There is a single server visiting the system immediately whenever needed. The server conducts preventive maintenance of the unit after a maximum operation time. If server is unable to repair the h/w components in maximum repair time, then components in the unit are replaced immediately by new one. However, only replacement of the s/w components has been made at their failure. The priority is given to the preventive maintenance over repair activities of the h/w. The time to failure of the components follows negative exponential distribution whereas the distribution of preventive maintenance, repair and replacement time are taken as arbitrary. The expressions for some important reliability measures of system effectiveness have been derived using semi-Markov process and regenerative point technique. The graphical behavior of the results has also been shown for a particular case.

  13. The reliability and validity of a Venezuelan version of the Bath Ankylosing Spondylitis Functional Index (BASFI) and Bath Ankylosing Spondylitis Disease Activity Index (BASDAI).

    Science.gov (United States)

    Rauseo Vera, Mayra; Gutiérrez-González, Luis Arturo; Maldonado, Irama; Al Snih, Soham

    2017-09-21

    Spondyloarthropathies (SpA) are disabling diseases with a prevalence of 1.9% in the general population. The indices designed for monitoring the disease should be valid, reliable and cross-culturally adapted for decision-making concerning the appropriate treatment. Changing an adjective or pronoun in a self-administered questionnaire could be the big difference in condensing an idea in a few words and transmitting that concept to all those who share the same language. To develop a Venezuelan version of the original English version of the BASDAI/BASFI and to evaluate its reliability and validity in Venezuelan patients with SpA. Certified linguists were needed for the translation of a Venezuelan version of the BASDAI/BASFI. The evaluation of reliability and validity was performed by calculating correlation coefficients in addition to Cronbach's alpha correlation between the BASDAI score and the clinical parameters (for example: erythrocyte sedimentation rate, C-reactive protein, modified Schöber test, occiput-to-wall distance and enthesis count). We studied 40 patients including 31 men (77.5%) and 9 women (22.5%). The mean age was 35.9 years ± standard deviation (SD) 12.01 and the disease duration was 11.5 years (± SD 9.5). The most common diagnoses were undifferentiated spondyloarthritis (45%), ankylosing spondylitis (27.5%) and psoriatic arthritis (20%). The incidences of reactive arthritis, ankylosing spondylitis and juvenile Reiter's syndrome were 2.5% each. The test-retest reliability of the BASDAI and BASFI was high (R = 0.99 and 0.99, respectively; P<.0001). The internal consistency for the BASDAI was high (Cronbach's alpha = 0.88; P=.002) and the intraclass correlation coefficient for internal consistency: 0.9867 (P=.001). Internal consistency for the BASFI: Cronbach's alpha = 0.7985 (P=.002), intraclass correlation coefficient for internal consistency: 0.9055 (P=.001). Construct validity of the BASDAI was high for general well-being of the patient (R = 0

  14. Frontiers of reliability

    CERN Document Server

    Basu, Asit P; Basu, Sujit K

    1998-01-01

    This volume presents recent results in reliability theory by leading experts in the world. It will prove valuable for researchers, and users of reliability theory. It consists of refereed invited papers on a broad spectrum of topics in reliability. The subjects covered include Bayesian reliability, Bayesian reliability modeling, confounding in a series system, DF tests, Edgeworth approximation to reliability, estimation under random censoring, fault tree reduction for reliability, inference about changes in hazard rates, information theory and reliability, mixture experiment, mixture of Weibul

  15. RELIABLE IDENTIFICATIONS OF ACTIVE GALACTIC NUCLEI FROM THE WISE, 2MASS, AND ROSAT ALL-SKY SURVEYS

    Energy Technology Data Exchange (ETDEWEB)

    Edelson, R. [Department of Astronomy, University of Maryland, College Park, MD 20742-2421 (United States); Malkan, M., E-mail: rickedelson@gmail.com [Department of Physics and Astronomy, University of California Los Angeles, Los Angeles, CA 90095-1547 (United States)

    2012-05-20

    We have developed the ''S{sub IX}'' statistic to identify bright, highly likely active galactic nucleus (AGN) candidates solely on the basis of Wide-field Infrared Survey Explorer (WISE), Two Micron All-Sky Survey (2MASS), and ROSAT all-sky survey (RASS) data. This statistic was optimized with data from the preliminary WISE survey and the Sloan Digital Sky Survey, and tested with Lick 3 m Kast spectroscopy. We find that sources with S{sub IX} < 0 have a {approx}>95% likelihood of being an AGN (defined in this paper as a Seyfert 1, quasar, or blazar). This statistic was then applied to the full WISE/2MASS/RASS dataset, including the final WISE data release, to yield the ''W2R'' sample of 4316 sources with S{sub IX} < 0. Only 2209 of these sources are currently in the Veron-Cetty and Veron (VCV) catalog of spectroscopically confirmed AGNs, indicating that the W2R sample contains nearly 2000 new, relatively bright (J {approx}< 16) AGNs. We utilize the W2R sample to quantify biases and incompleteness in the VCV catalog. We find that it is highly complete for bright (J < 14), northern AGNs, but the completeness drops below 50% for fainter, southern samples and for sources near the Galactic plane. This approach also led to the spectroscopic identification of 10 new AGNs in the Kepler field, more than doubling the number of AGNs being monitored by Kepler. The W2R sample contains better than 1 bright AGN every 10 deg{sup 2}, permitting construction of AGN samples in any sufficiently large region of sky.

  16. System Reliability Engineering

    International Nuclear Information System (INIS)

    Lim, Tae Jin

    2005-02-01

    This book tells of reliability engineering, which includes quality and reliability, reliability data, importance of reliability engineering, reliability and measure, the poisson process like goodness of fit test and the poisson arrival model, reliability estimation like exponential distribution, reliability of systems, availability, preventive maintenance such as replacement policies, minimal repair policy, shock models, spares, group maintenance and periodic inspection, analysis of common cause failure, and analysis model of repair effect.

  17. SUBCONTRACT REPORT: DC-DC Converter for Fuel Cell and Hybrid Vehicles

    Energy Technology Data Exchange (ETDEWEB)

    Marlino, Laura D [ORNL; Zhu, Lizhi [Ballard Power Systems/Siemens VDO

    2007-07-01

    The goal of this project is to develop and fabricate a 5kW dc-dc converter with a baseline 14V output capability for fuel cell and hybrid vehicles. The major objectives for this dc-dc converter technology are to meet: Higher efficiency (92%); High coolant temperature,e capability (105 C); High reliability (15 Years/150,000miles); Smaller volume (5L); Lower weight (6kg); and Lower cost ($75/kW). The key technical challenge for these converters is the 105 C coolant temperatures. The power switches and magnetics must be designed to sustain these operating temperatures reliably, without a large cost/mass/volume penalty.

  18. Evaluation of the Potential for the Production of Lignocellulosic Based Ethanol at Existing Corn Ethanol Facilities: Final Subcontract Report, 2 March 2000 - 30 March 2002

    Energy Technology Data Exchange (ETDEWEB)

    2002-07-01

    Subcontract report on opportunities to explore the business potential provided by converting biomass to products such as ethanol. The goals of this study were: (1) To provide the opportunity to explore the business potential provided by converting biomass to products such as ethanol. (2) To take advantage of the grain-processing infrastructure by investigating the co-location of additional biomass conversion facilities at an existing plant site.

  19. Human Reliability Program Workshop

    Energy Technology Data Exchange (ETDEWEB)

    Landers, John; Rogers, Erin; Gerke, Gretchen

    2014-05-18

    A Human Reliability Program (HRP) is designed to protect national security as well as worker and public safety by continuously evaluating the reliability of those who have access to sensitive materials, facilities, and programs. Some elements of a site HRP include systematic (1) supervisory reviews, (2) medical and psychological assessments, (3) management evaluations, (4) personnel security reviews, and (4) training of HRP staff and critical positions. Over the years of implementing an HRP, the Department of Energy (DOE) has faced various challenges and overcome obstacles. During this 4-day activity, participants will examine programs that mitigate threats to nuclear security and the insider threat to include HRP, Nuclear Security Culture (NSC) Enhancement, and Employee Assistance Programs. The focus will be to develop an understanding of the need for a systematic HRP and to discuss challenges and best practices associated with mitigating the insider threat.

  20. Establishing the reliability and construct validity of the Igbo version of Screening Activity Limitation and Safety Awareness scale in persons with Hansen disease.

    Science.gov (United States)

    Ibikunle, Peter Olanrewaju; Oladipo, Samuel Ekundayo; Chukwu, Joseph Ngozi; Odole, Adesola Christiana; Okeke, Adaigwe Ifeoma

    2015-09-01

    Leprosy or Hansen's disease is an infectious disease affecting skin and peripheral nerves. The World Health Organization (WHO) Recent Report reveals Africa as having 20,599 new cases, America 36, 178, Eastern Asia 166,445, Western pacific 5,400; totally up to 232,875 new cases. Nigeria as at 2012 had 3,805 new cases. Nerve dysfunction can lead to severe impairments, such as wounds, clawing and shortening of digits, and visual impairments that are often indicated as WHO Grade 2 disabilities. The Screening Activity Limitation Safety Awareness (SALSA) scale however, was developed to-measure self-reported activity limitation in people affected by peripheral neuropathy, and has been translated into several languages world-wide, including two of the three major indigenous languages in Nigeria (i.e. Yoruba and Hausa), leaving the Igbo language yet to be translated. This resulted in the present study, in which the scale was translated into Igbo and the psychometric properties also established to help in data collection and to promote research among the Igbo speaking people living with disabilities from Hansen's disease. The research design was a cross-sectional survey, facility based with 70% RFT and 30% on MDT. Data were analysed using Cronbach's alpha and factor analyses. A quantitative exploration of participants' characteristics revealed that of the 40 respondents that participated in the study; 87.5% of them were predominantly from a rural population; 42.5% were males and 57.5% females. Their ages ranged between 15 and 64 years; 55% were uneducated; while 45% were educated. The SALSA Scale was interviewer-administered to the participants. Reliability analysis conducted on the data revealed high Cronbach's alpha co-efficient of 0.93 - 0.94 for the entire items on the scale. Firstly, most of the scale items correlated at least 0.3 with at least one other item on the scale, Secondly, the Kaiser-Meyer-Olkin measure of sampling adequacy was 0.71, Bartlett's test of

  1. AMSAA Reliability Growth Guide

    National Research Council Canada - National Science Library

    Broemm, William

    2000-01-01

    ... has developed reliability growth methodology for all phases of the process, from planning to tracking to projection. The report presents this methodology and associated reliability growth concepts.

  2. Rapid, reliable, and sensitive detection of adenosine deaminase activity by UHPLC-Q-Orbitrap HRMS and its application to inhibitory activity evaluation of traditional Chinese medicines.

    Science.gov (United States)

    Qi, Shenglan; Guan, Huida; Deng, Gang; Yang, Tao; Cheng, Xuemei; Liu, Wei; Liu, Ping; Wang, Changhong

    2018-05-10

    Adenosine deaminase (ADA), which is a key enzyme in the metabolism of purine nucleosides, plays important roles in diverse disorders, such as tuberculosis, diabetes, liver disorders, and cancer. Determination of the activities of ADA and its isoenzymes in body fluids has received considerable attention in the diagnosis and treatment of relative diseases. Ultraviolet spectroscopy with adenosine (AD) as a substrate is a classical approach for screening potential ADA inhibitors by measuring the decrease in substrate (AD) at 265 nm or increase in the product (inosine) at 248 nm. However, AD and inosine share a very close maximum absorption wavelength, and the reaction is uncertain and is frequently interfered by the background color of matrix compounds or plant extracts. Thus, the method usually yields false positive or negative results. In this study, a novel, rapid, sensitive, and accurate ultra-high-performance liquid chromatography-Q exactive hybrid quadrupole orbitrap high-resolution accurate mass spectrometric (UHPLC-Q-Orbitrap HRMS) method was developed for determining and screening ADA inhibitors by directly determining the deamination product of AD, inosine. A proper separation was achieved for inosine and chlormequat (internal standard) within 2 min via isocratic elution (0.1% formic acid:methanol = 85:15, v/v) at a flow rate of 0.3 mL min -1 on a Waters ACQUITY HSS T3 column (2.1 mm × 100 mm, 1.8 μm) following a simple precipitation of proteins. The intra- and inter-day precisions of the developed method were below 7.17% and 8.99%, respectively. The method exhibited advantages of small total reaction volume (60 μL), short running time (2 min), high sensitivity (lowest limit of quantification of 0.02 μM for inosine), and low cost (small enzyme consumption of 0.007 unit mL -1 for ADA and substrate of 3.74 μM for AD in individual inhibition), and no matrix effects (101.64%-107.12%). Stability results showed that all

  3. The value of reliability

    DEFF Research Database (Denmark)

    Fosgerau, Mogens; Karlström, Anders

    2010-01-01

    We derive the value of reliability in the scheduling of an activity of random duration, such as travel under congested conditions. Using a simple formulation of scheduling utility, we show that the maximal expected utility is linear in the mean and standard deviation of trip duration, regardless...... of the form of the standardised distribution of trip durations. This insight provides a unification of the scheduling model and models that include the standard deviation of trip duration directly as an argument in the cost or utility function. The results generalise approximately to the case where the mean...

  4. Reliable Prediction with Tuned Range-Separated Functionals of the Singlet-Triplet Gap in Organic Emitters for Thermally Activated Delayed Fluorescence (TADF)

    KAUST Repository

    Sun, Haitao

    2015-07-09

    The thermally activated delayed fluorescence (TADF) mechanism has recently attracted much interest in the field of organic light-emitting diodes (OLEDs). TADF relies on the presence of a very small energy gap between the lowest singlet and triplet excited states. Here, we demonstrate that time-dependent density functional theory (TD-DFT) in the Tamm-Dancoff Approximation can be very successful in the calculations of the lowest singlet and triplet excitation energies and the corresponding singlet-triplet gap when using nonempirically tuned range-separated functionals. Such functionals provide very good estimates in a series of 17 molecules used in TADF-based OLED devices, with mean absolute deviations of 0.15 eV for the vertical singlet excitation energies and 0.09 eV [0.07 eV] for the adiabatic [vertical] singlet-triplet energy gaps as well as low relative errors and high correlation coefficients compared to the corresponding experimental values. They significantly outperform conventional functionals, a feature which is rationalized on the basis of the amount of exact-exchange included and the delocalization error. The present work provides a reliable theoretical tool for the prediction and development of novel TADF-based materials with low singlet-triplet energetic splittings.

  5. Towards Reliable Integrated Services for Dependable Systems

    DEFF Research Database (Denmark)

    Schiøler, Henrik; Ravn, Anders Peter; Izadi-Zamanabadi, Roozbeh

    Reliability issues for various technical systems are discussed and focus is directed towards distributed systems, where communication facilities are vital to maintain system functionality. Reliability in communication subsystems is considered as a resource to be shared among a number of logical c...... applications residing on alternative routes. Details are provided for the operation of RRRSVP based on reliability slack calculus. Conclusions summarize the considerations and give directions for future research....... connections and a reliability management framework is suggested. We suggest a network layer level reliability management protocol RRSVP (Reliability Resource Reservation Protocol) as a counterpart of the RSVP for bandwidth and time resource management. Active and passive standby redundancy by background...

  6. Towards Reliable Integrated Services for Dependable Systems

    DEFF Research Database (Denmark)

    Schiøler, Henrik; Ravn, Anders Peter; Izadi-Zamanabadi, Roozbeh

    2003-01-01

    Reliability issues for various technical systems are discussed and focus is directed towards distributed systems, where communication facilities are vital to maintain system functionality. Reliability in communication subsystems is considered as a resource to be shared among a number of logical c...... applications residing on alternative routes. Details are provided for the operation of RRRSVP based on reliability slack calculus. Conclusions summarize the considerations and give directions for future research....... connections and a reliability management framework is suggested. We suggest a network layer level reliability management protocol RRSVP (Reliability Resource Reservation Protocol) as a counterpart of the RSVP for bandwidth and time resource management. Active and passive standby redundancy by background...

  7. A reliability simulation language for reliability analysis

    International Nuclear Information System (INIS)

    Deans, N.D.; Miller, A.J.; Mann, D.P.

    1986-01-01

    The results of work being undertaken to develop a Reliability Description Language (RDL) which will enable reliability analysts to describe complex reliability problems in a simple, clear and unambiguous way are described. Component and system features can be stated in a formal manner and subsequently used, along with control statements to form a structured program. The program can be compiled and executed on a general-purpose computer or special-purpose simulator. (DG)

  8. Reliability data banks

    International Nuclear Information System (INIS)

    Cannon, A.G.; Bendell, A.

    1991-01-01

    Following an introductory chapter on Reliability, what is it, why it is needed, how it is achieved and measured, the principles of reliability data bases and analysis methodologies are the subject of the next two chapters. Achievements due to the development of data banks are mentioned for different industries in the next chapter, FACTS, a comprehensive information system for industrial safety and reliability data collection in process plants are covered next. CREDO, the Central Reliability Data Organization is described in the next chapter and is indexed separately, as is the chapter on DANTE, the fabrication reliability Data analysis system. Reliability data banks at Electricite de France and IAEA's experience in compiling a generic component reliability data base are also separately indexed. The European reliability data system, ERDS, and the development of a large data bank come next. The last three chapters look at 'Reliability data banks, - friend foe or a waste of time'? and future developments. (UK)

  9. Suncor maintenance and reliability

    Energy Technology Data Exchange (ETDEWEB)

    Little, S. [Suncor Energy, Calgary, AB (Canada)

    2006-07-01

    Fleet maintenance and reliability at Suncor Energy was discussed in this presentation, with reference to Suncor Energy's primary and support equipment fleets. This paper also discussed Suncor Energy's maintenance and reliability standard involving people, processes and technology. An organizational maturity chart that graphed organizational learning against organizational performance was illustrated. The presentation also reviewed the maintenance and reliability framework; maintenance reliability model; the process overview of the maintenance and reliability standard; a process flow chart of maintenance strategies and programs; and an asset reliability improvement process flow chart. An example of an improvement initiative was included, with reference to a shovel reliability review; a dipper trip reliability investigation; bucket related failures by type and frequency; root cause analysis of the reliability process; and additional actions taken. Last, the presentation provided a graph of the results of the improvement initiative and presented the key lessons learned. tabs., figs.

  10. The Test-Retest Reliability OfTthe Onset Of Core And Vasti Eectromyographic Activity While Ascending And Descending Stairs In Healthy Controls Aand patellofemoral Pain Patients

    Directory of Open Access Journals (Sweden)

    Mohammad-Ali Sanjari

    2011-02-01

    Full Text Available Backgroundentity.It is hypothesized to result from abnormal patellar tracking caused by altered motorcontrol. Deficit in neuromotor control of the core may be a remote contributing factor to thedevelopment of PFP. Application of reliable EMG measures would be helpful to handle thistheory. Therefore, the purpose of this study was to determine the test-retest reliability of thecore and vasti EMG onsets, while ascending/descending stairs.: Patellofemoral pain (PFP is a common affliction and complex clinicalMethodsand Core EMG onsets during stair stepping were assessed two times a day. Intraclass correlationcoefficients (ICCs and standard errors of measurement (SEMs were calculated.: Ten males with PFP and ten healthy controls participated in this study. VastiResultsonsets of control cases (ICC 3,1 ≥ 0.70 except Quadratus Lumborum (QL which showeda moderate reliability (ICC for ascending=0.59 and for descending = 0.61. In controls,Vasti in both tasks showed the highest absolute reliability. During ascending, highreliability (ICC ≥ 0.70 in PFP group was demonstrated for all EMG onsets except Gluteusmaximus (GMAX and QL which showed a moderate reliability (ICC = 0.69 and 0.63 respectively.In this group while descending stairs, all EMG onsets showed high relativereliability (ICC ≥ 0.70. Moderate to high absolute reliability was obtained for onset timeswhile ascending/descending stairs in PFP group.: During both ascending/descending, high reliability was found for all EMGConclusionreliability.: Most EMG onsets during stair scending/descending had moderate to high

  11. The Accelerator Reliability Forum

    CERN Document Server

    Lüdeke, Andreas; Giachino, R

    2014-01-01

    A high reliability is a very important goal for most particle accelerators. The biennial Accelerator Reliability Workshop covers topics related to the design and operation of particle accelerators with a high reliability. In order to optimize the over-all reliability of an accelerator one needs to gather information on the reliability of many different subsystems. While a biennial workshop can serve as a platform for the exchange of such information, the authors aimed to provide a further channel to allow for a more timely communication: the Particle Accelerator Reliability Forum [1]. This contribution will describe the forum and advertise it’s usage in the community.

  12. High Throughput Manufacturing of Thin-Film CdTe Photovoltaic Materials; Final Subcontract Report, 16 November 1993-31 December 1998

    International Nuclear Information System (INIS)

    Sandwisch, D.W.

    1999-01-01

    This report describes work performed by Solar Cells, Inc. (SCI), during this Photovoltaic Manufacturing Technology (PVMaT) subcontract. Cadmium telluride (CdTe) is recognized as one of the leading materials for low-cost photovoltaic modules. SCI has developed this technology and is preparing to scale its pilot production capabilities to a multi-megawatt level. This four-phase PVMaT subcontract supports these efforts. The work was related to product definition, process definition, equipment engineering, and support programs development. In the area of product definition and demonstration, two products were specified and demonstrated-a grid-connected, frameless, high-voltage product that incorporates a pigtail potting design and a remote low-voltage product that may be framed and may incorporate a junction box. SCI produced a 60.3-W thin-film CdTe module with total-area efficiency of 8.4%; SCI also improved module pass rate on the interim qualification test protocol from less than 20% to 100% as a result of work related to the subcontract. In the manufacturing process definition area, the multi-megawatt manufacturing process was defined, several of the key processes were demonstrated, and the process was refined and proven on a 100-kW pilot line that now operates as a 250-kW line. In the area of multi-megawatt manufacturing-line conceptual design review, SCI completed a conceptual layout of the multi-megawatt lines. The layout models the manufacturing line and predicts manufacturing costs. SCI projected an optimized capacity, two-shift/day operation of greater than 25 MW at a manufacturing cost of below$1.00/W

  13. High Throughput Manufacturing of Thin-Film CdTe Photovoltaic Materials; Final Subcontract Report, 16 November 1993-31 December 1998

    Energy Technology Data Exchange (ETDEWEB)

    Sandwisch, D. W. (Solar Cells, Inc.)

    1999-09-02

    This report describes work performed by Solar Cells, Inc. (SCI), during this Photovoltaic Manufacturing Technology (PVMaT) subcontract. Cadmium telluride (CdTe) is recognized as one of the leading materials for low-cost photovoltaic modules. SCI has developed this technology and is preparing to scale its pilot production capabilities to a multi-megawatt level. This four-phase PVMaT subcontract supports these efforts. The work was related to product definition, process definition, equipment engineering, and support programs development. In the area of product definition and demonstration, two products were specified and demonstrated-a grid-connected, frameless, high-voltage product that incorporates a pigtail potting design and a remote low-voltage product that may be framed and may incorporate a junction box. SCI produced a 60.3-W thin-film CdTe module with total-area efficiency of 8.4%; SCI also improved module pass rate on the interim qualification test protocol from less than 20% to 100% as a result of work related to the subcontract. In the manufacturing process definition area, the multi-megawatt manufacturing process was defined, several of the key processes were demonstrated, and the process was refined and proven on a 100-kW pilot line that now operates as a 250-kW line. In the area of multi-megawatt manufacturing-line conceptual design review, SCI completed a conceptual layout of the multi-megawatt lines. The layout models the manufacturing line and predicts manufacturing costs. SCI projected an optimized capacity, two-shift/day operation of greater than 25 MW at a manufacturing cost of below $1.00/W.

  14. Load Control System Reliability

    Energy Technology Data Exchange (ETDEWEB)

    Trudnowski, Daniel [Montana Tech of the Univ. of Montana, Butte, MT (United States)

    2015-04-03

    This report summarizes the results of the Load Control System Reliability project (DOE Award DE-FC26-06NT42750). The original grant was awarded to Montana Tech April 2006. Follow-on DOE awards and expansions to the project scope occurred August 2007, January 2009, April 2011, and April 2013. In addition to the DOE monies, the project also consisted of matching funds from the states of Montana and Wyoming. Project participants included Montana Tech; the University of Wyoming; Montana State University; NorthWestern Energy, Inc., and MSE. Research focused on two areas: real-time power-system load control methodologies; and, power-system measurement-based stability-assessment operation and control tools. The majority of effort was focused on area 2. Results from the research includes: development of fundamental power-system dynamic concepts, control schemes, and signal-processing algorithms; many papers (including two prize papers) in leading journals and conferences and leadership of IEEE activities; one patent; participation in major actual-system testing in the western North American power system; prototype power-system operation and control software installed and tested at three major North American control centers; and, the incubation of a new commercial-grade operation and control software tool. Work under this grant certainly supported the DOE-OE goals in the area of “Real Time Grid Reliability Management.”

  15. Supply chain reliability modelling

    Directory of Open Access Journals (Sweden)

    Eugen Zaitsev

    2012-03-01

    Full Text Available Background: Today it is virtually impossible to operate alone on the international level in the logistics business. This promotes the establishment and development of new integrated business entities - logistic operators. However, such cooperation within a supply chain creates also many problems related to the supply chain reliability as well as the optimization of the supplies planning. The aim of this paper was to develop and formulate the mathematical model and algorithms to find the optimum plan of supplies by using economic criterion and the model for the probability evaluating of non-failure operation of supply chain. Methods: The mathematical model and algorithms to find the optimum plan of supplies were developed and formulated by using economic criterion and the model for the probability evaluating of non-failure operation of supply chain. Results and conclusions: The problem of ensuring failure-free performance of goods supply channel analyzed in the paper is characteristic of distributed network systems that make active use of business process outsourcing technologies. The complex planning problem occurring in such systems that requires taking into account the consumer's requirements for failure-free performance in terms of supply volumes and correctness can be reduced to a relatively simple linear programming problem through logical analysis of the structures. The sequence of the operations, which should be taken into account during the process of the supply planning with the supplier's functional reliability, was presented.

  16. Reliability data collection and use in risk and availability assessment

    International Nuclear Information System (INIS)

    Colombari, V.

    1989-01-01

    For EuReDatA it is a prevailing objective to initiate and support contact between experts, companies and institutions active in reliability engineering and research. Main topics of this 6th EuReDatA Conference are: Reliability data banks; incidents data banks; common cause data; source and propagation of uncertainties; computer aided risk analysis; reliability and incidents data acquisition and processing; human reliability; probabilistic safety and availability assessment; feedback of reliability into system design; data fusion; reliability modeling and techniques; structural and mechanical reliability; consequence modeling; software and electronic reliability; reliability tests. Some conference papers are separately indexed in the database. (HP)

  17. The motivation of subcontracted workers: a never-ending paradox La motivación de los trabajadores subcontratados. Una paradoja incesante

    Directory of Open Access Journals (Sweden)

    Alina Marcela Bustamente Salazar

    2010-12-01

    Full Text Available Certain considerations come about the subcontracted workers motivation when the Strategic Human Resource Management is used as a point of reference for diverse analysis. This article shows two faces of Human Resource Management. On one hand, the article indicates how important worker motivation has been for Human Resource Management and its direct association with worker productivity and efficacy. On the other hand, it points out the increasing importance that subcontracting has had as an alternative that allows companies the flexibilization and minimization of labor costs. Even though a structural contradiction comes up in this context, subcontracting seems to strive for feelings of affiliation and pride of belonging which are key elements to motivate the personnel. Apart from the literature review, the study was based on an ethnographic methodology of executives, contractors and subcontracted workers; and the results aim to contribute to streams of Organizational Theory and Human Resource Management.En el artículo se presentan consideraciones acerca de la motivación de los trabajadores subcontratados, en el marco de referencia de la “Gestión Humana Estratégica”. Se exponendos facetas de la administración de personal: por un lado, lo importante que ha sido lamotivación de los trabajadores para la Gestión Humana, como también la asociacióndirecta de esta con la productividad y la eficacia. Por otra parte, el auge creciente que hatenido la subcontratación como alternativa que permite a las empresas la flexibilizacióny minimización de sus costos laborales. Sin embargo, en este contexto, aparece unacontradicción estructural: la subcontratación parece atentar contra los sentimientos deafiliación y pertenencia organizacional, elementos claves para la motivación del personal.Además de la revisión documental, se llevó a cabo un trabajo etnometodológico conejecutivos, contratistas y empleados subcontratados. Los

  18. Human Reliability Program Overview

    Energy Technology Data Exchange (ETDEWEB)

    Bodin, Michael

    2012-09-25

    This presentation covers the high points of the Human Reliability Program, including certification/decertification, critical positions, due process, organizational structure, program components, personnel security, an overview of the US DOE reliability program, retirees and academia, and security program integration.

  19. Power electronics reliability analysis.

    Energy Technology Data Exchange (ETDEWEB)

    Smith, Mark A.; Atcitty, Stanley

    2009-12-01

    This report provides the DOE and industry with a general process for analyzing power electronics reliability. The analysis can help with understanding the main causes of failures, downtime, and cost and how to reduce them. One approach is to collect field maintenance data and use it directly to calculate reliability metrics related to each cause. Another approach is to model the functional structure of the equipment using a fault tree to derive system reliability from component reliability. Analysis of a fictitious device demonstrates the latter process. Optimization can use the resulting baseline model to decide how to improve reliability and/or lower costs. It is recommended that both electric utilities and equipment manufacturers make provisions to collect and share data in order to lay the groundwork for improving reliability into the future. Reliability analysis helps guide reliability improvements in hardware and software technology including condition monitoring and prognostics and health management.

  20. Reliability of software

    International Nuclear Information System (INIS)

    Kopetz, H.

    1980-01-01

    Common factors and differences in the reliability of hardware and software; reliability increase by means of methods of software redundancy. Maintenance of software for long term operating behavior. (HP) [de

  1. Reliable Design Versus Trust

    Science.gov (United States)

    Berg, Melanie; LaBel, Kenneth A.

    2016-01-01

    This presentation focuses on reliability and trust for the users portion of the FPGA design flow. It is assumed that the manufacturer prior to hand-off to the user tests FPGA internal components. The objective is to present the challenges of creating reliable and trusted designs. The following will be addressed: What makes a design vulnerable to functional flaws (reliability) or attackers (trust)? What are the challenges for verifying a reliable design versus a trusted design?

  2. Pocket Handbook on Reliability

    Science.gov (United States)

    1975-09-01

    exponencial distributions Weibull distribution, -xtimating reliability, confidence intervals, relia- bility growth, 0. P- curves, Bayesian analysis. 20 A S...introduction for those not familiar with reliability and a good refresher for those who are currently working in the area. LEWIS NERI, CHIEF...includes one or both of the following objectives: a) prediction of the current system reliability, b) projection on the system reliability for someI future

  3. Chemical Profiles of Microalgae with Emphasis on Lipids: A Subcontract Report

    Energy Technology Data Exchange (ETDEWEB)

    Tornabene, T. G.; Hubbard, J. S.

    1984-09-01

    Well balanced cultivated cells that are healthy and unstressed produce the optimum cellular yield. All stress studies for lipids production should be conducted with the established cell mass and not be administered during active cultivation. Cells cultivated continually in suboptimum conditions produce lower cellular yields and continuous cultivation in suboptimum media and environmental conditions produce lower than normal lipid levels. Lipid triggers are preceded by a burst of carbohydrate synthesis and storage.

  4. Principles of Bridge Reliability

    DEFF Research Database (Denmark)

    Thoft-Christensen, Palle; Nowak, Andrzej S.

    The paper gives a brief introduction to the basic principles of structural reliability theory and its application to bridge engineering. Fundamental concepts like failure probability and reliability index are introduced. Ultimate as well as serviceability limit states for bridges are formulated......, and as an example the reliability profile and a sensitivity analyses for a corroded reinforced concrete bridge is shown....

  5. Reliability in engineering '87

    International Nuclear Information System (INIS)

    Tuma, M.

    1987-01-01

    The participants heard 51 papers dealing with the reliability of engineering products. Two of the papers were incorporated in INIS, namely ''Reliability comparison of two designs of low pressure regeneration of the 1000 MW unit at the Temelin nuclear power plant'' and ''Use of probability analysis of reliability in designing nuclear power facilities.''(J.B.)

  6. Yields, photosynthetic efficiencies, and proximate chemical composition of dense cultures of marine microalgae. A subcontract report

    Energy Technology Data Exchange (ETDEWEB)

    Thomas, W.H.; Seibert, D.L.R.; Alden, M.; Eldridge, P.; Neori, A.

    1983-07-01

    The yields, photosynthetic efficiencies, and proximate composition of several microalgae were compared in dense cultures grown at light intensities up to 70% sunlight. Yields ranged from 3.4 to 21.7 g dry weight/m/sup 2/ day. The highest yield was obtained with Phaeodactylum; the lowest in Botryococcus cultures. The same species had the highest and lowest efficiencies of utilization of photosynthetically active radiation. In nitrogen-sufficient cells of all but one species, most of the dry weight consisted of protein. Lipid content of all species was 20 to 29%, and carbohydrate content 11 to 23%. Lipid content increased somewhat in N-deficient Phaeodactylum and Isochrysis cells, but decreased in deficient Monallanthus cells. Because the overall dry weight yield was reduced by deficiency, lipid yields did not increase. However, since the carbohydrate content increased to about 65% in N-deficient Dunaliella and Tetraselmis cells, the carbohydrate yield increased. In Phaeodactylum the optimum light intensity was about 40% of full sunlight. Most experimets with this alga included a CUSO/sub 4/ filter to decrease infrared irradiance. When this filter was removed, the yield increased because more red light in the photosynthetically active spectral range was included. These results should prove useful to workers attempting to maximize yields and efficiencies, but additional studies are needed. 69 references, 27 figures, 18 tables.

  7. Subcontract Report: Diffusion Mechanisms and Bond Dynamics in Solid Electrolyte Ion-Conductors

    Energy Technology Data Exchange (ETDEWEB)

    Zevgolis, A. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Hall, A. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Alvez, T. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Mehmedovic, Z. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Shea, P. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Varley, J. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Wood, B. C. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Adelstein, N. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2017-10-03

    We employ first-principles molecular dynamics simulations and Maximally Localized Wannier Function (MLWF) analysis to explore how halide substitution and nano-phase microstructures affect diffusivity, through the activation energy barrier - Ea and D0, in the solid electrolyte Li3InBr6-xClx. We find that nano-phase microstructures with x=3 (50-50 Br-Cl) mixed composition have a higher diffusivity compared to x=2 and x=3 solid solutions. There is a positive linear relationship between ln(D0.) and Ea, which suggests that for superionic conductivity optimizing both the activation energy and the D0 is important. Bond frustration due to mismatch in crystal geometry and ideal coordination number leads to especially high diffusivity through a high D0 in the x=3 composition.

  8. Reliable computer systems.

    Science.gov (United States)

    Wear, L L; Pinkert, J R

    1993-11-01

    In this article, we looked at some decisions that apply to the design of reliable computer systems. We began with a discussion of several terms such as testability, then described some systems that call for highly reliable hardware and software. The article concluded with a discussion of methods that can be used to achieve higher reliability in computer systems. Reliability and fault tolerance in computers probably will continue to grow in importance. As more and more systems are computerized, people will want assurances about the reliability of these systems, and their ability to work properly even when sub-systems fail.

  9. Human factor reliability program

    International Nuclear Information System (INIS)

    Knoblochova, L.

    2017-01-01

    The human factor's reliability program was at Slovenske elektrarne, a.s. (SE) nuclear power plants. introduced as one of the components Initiatives of Excellent Performance in 2011. The initiative's goal was to increase the reliability of both people and facilities, in response to 3 major areas of improvement - Need for improvement of the results, Troubleshooting support, Supporting the achievement of the company's goals. The human agent's reliability program is in practice included: - Tools to prevent human error; - Managerial observation and coaching; - Human factor analysis; -Quick information about the event with a human agent; -Human reliability timeline and performance indicators; - Basic, periodic and extraordinary training in human factor reliability(authors)

  10. The Reliability of Disease Activity Score in 28 Joints-C-Reactive Protein Might Be Overestimated in a Subgroup of Rheumatoid Arthritis Patients, When the Score Is Solely Based on Subjective Parameters

    DEFF Research Database (Denmark)

    Jensen Hansen, Inger Marie; Asmussen Andreasen, Rikke; Van Bui Hansen, Mark Nam

    2017-01-01

    BACKGROUND: Disease Activity Score in 28 Joints (DAS28) is a scoring system to evaluate disease activity and treatment response in rheumatoid arthritis (RA). A DAS28 score of greater than 3.2 is a well-described limit for treatment intensification; however, the reliability of DAS28 might be overe......BACKGROUND: Disease Activity Score in 28 Joints (DAS28) is a scoring system to evaluate disease activity and treatment response in rheumatoid arthritis (RA). A DAS28 score of greater than 3.2 is a well-described limit for treatment intensification; however, the reliability of DAS28 might...... be overestimated. OBJECTIVE: The aim of this study was to evaluate the reliability of DAS28 in RA, especially focusing on a subgroup of patients with a DAS28 score of greater than 3.2. METHODS: Data from RA patients registered in the local part of Danish DANBIO Registry were collected in May 2015. Patients were....... Patients with central sensitization and psychological problems and those with false-positive diagnosis of RA are at high risk of overtreatment.This is an open-access article distributed under the terms of the Creative Commons Attribution-Non Commercial-No Derivatives License 4.0 (CCBY-NC-ND), where...

  11. Quality assurance and the sub-contract interface: co-operative evaluations

    International Nuclear Information System (INIS)

    Churchill, G.F.; Rippon, D.J.

    1976-01-01

    A common feature of all contemporary Quality Assurance Standards is the requirement for organisations, when carrying out purchasing activities, to select their suppliers on the basis of either a proven record or demonstrated quality capability. In particular the C.E.G.B. Standard QA42-1 Quality Assurance Programme, which the C.E.G.B. will apply to their future major projects, requires purchasers to establish supplier selection and assessment procedures using one or other of the following methods: (a) a previous continuous record of supplying identical or equivalent material to a satisfactory standard; or (b) an evaluation of the sub-contractor's quality assurance system to determine his ability to satisfy the procurement requirements. Co-operative evaluations, where there are several suppliers, are discussed. (author)

  12. Two cases of methyl alcohol intoxication by sub-chronic inhalation and dermal exposure during aluminum CNC cutting in a small-sized subcontracted factory.

    Science.gov (United States)

    Ryu, Jia; Lim, Key Hwan; Ryu, Dong-Ryeol; Lee, Hyang Woon; Yun, Ji Young; Kim, Seoung-Wook; Kim, Ji-Hoon; Jung-Choi, Kyunghee; Kim, Hyunjoo

    2016-01-01

    Methyl alcohol poisoning has been mainly reported in community. Two cases of methyl alcohol poisoning occurred in a small-sized subcontracted factory which manufactured smartphone parts in Korea. One young female patient presented with dyspnea and visual disturbance. Another young male patient presented with visual disturbance and myalgia. They treated with sodium bicarbonate infusion and hemodialysis for metabolic acidosis. In addition, he received ethyl alcohol per oral treatment. Her and his urinary methyl alcohol concentration was detected as 7.632 mg/L, 46.8 mg/L, respectively, although they were treated hemodialysis. Results of the working environment measurement showed that the concentration of methyl alcohol (1030.1-2220.5 ppm) in the air exceeded the time weighted average (200 ppm). They were diagnosed with optic neuropathy due to methyl alcohol poisoning and still have visual impairment. Workers who hired as dispatched employees in a small-sized subcontracted factory were exposed to high concentrations of methyl alcohol. The workplace had poor ventilation system. In addition, workers did not wear proper personal protect equipment. Working environment measurement and annual chekups for workers were not performed. They were in a blind spot to occupational safety and health. More attention is needed to protect vulnerable workers' health.

  13. The short version of the Activities-specific Balance Confidence (ABC) scale: Its validity, reliability, and relationship to balance impairment and falls in older adults

    OpenAIRE

    Schepens, Stacey; Goldberg, Allon; Wallace, Melissa

    2009-01-01

    A shortened version of the ABC 16-item scale (ABC-16), the ABC-6, has been proposed as an alternative balance confidence measure. We investigated whether the ABC-6 is a valid and reliable measure of balance confidence and examined its relationship to balance impairment and falls in older adults. Thirty-five community-dwelling older adults completed the ABC-16, including the six questions of the ABC-6. They also completed the following clinical balance tests: unipedal stance time (UST), functi...

  14. The number of measurements needed to obtain high reliability for traits related to enzymatic activities and photosynthetic compounds in soybean plants infected with Phakopsora pachyrhizi

    Science.gov (United States)

    de Oliveira, Tássia Boeno; Teodoro, Paulo Eduardo; de Alvarenga, Amauri Alves; Bhering, Leonardo Lopes; Campo, Clara Beatriz Hoffmann

    2018-01-01

    Asian rust affects the physiology of soybean plants and causes losses in yield. Repeatability coefficients may help breeders to know how many measurements are needed to obtain a suitable reliability for a target trait. Therefore, the objectives of this study were to determine the repeatability coefficients of 14 traits in soybean plants inoculated with Phakopsora pachyrhizi and to establish the minimum number of measurements needed to predict the breeding value with high accuracy. Experiments were performed in a 3x2 factorial arrangement with three treatments and two inoculations in a random block design. Repeatability coefficients, coefficients of determination and number of measurements needed to obtain a certain reliability were estimated using ANOVA, principal component analysis based on the covariance matrix and the correlation matrix, structural analysis and mixed model. It was observed that the principal component analysis based on the covariance matrix out-performed other methods for almost all traits. Significant differences were observed for all traits except internal CO2 concentration for the treatment effects. For the measurement effects, all traits were significantly different. In addition, significant differences were found for all Treatment x Measurement interaction traits except coumestrol, chitinase and chlorophyll content. Six measurements were suitable to obtain a coefficient of determination higher than 0.7 for all traits based on principal component analysis. The information obtained from this research will help breeders and physiologists determine exactly how many measurements are needed to evaluate each trait in soybean plants infected by P. pachyrhizi with a desirable reliability. PMID:29438380

  15. The short version of the Activities-specific Balance Confidence (ABC) scale: its validity, reliability, and relationship to balance impairment and falls in older adults.

    Science.gov (United States)

    Schepens, Stacey; Goldberg, Allon; Wallace, Melissa

    2010-01-01

    A shortened version of the ABC 16-item scale (ABC-16), the ABC-6, has been proposed as an alternative balance confidence measure. We investigated whether the ABC-6 is a valid and reliable measure of balance confidence and examined its relationship to balance impairment and falls in older adults. Thirty-five community-dwelling older adults completed the ABC-16, including the 6 questions of the ABC-6. They also completed the following clinical balance tests: unipedal stance time (UST), functional reach (FR), Timed Up and Go (TUG), and maximum step length (MSL). Participants reported 12-month falls history. Balance confidence on the ABC-6 was significantly lower than on the ABC-16, however scores were highly correlated. Fallers reported lower balance confidence than non-fallers as measured by the ABC-6 scale, but confidence did not differ between the groups with the ABC-16. The ABC-6 significantly correlated with all balance tests assessed and number of falls. The ABC-16 significantly correlated with all balance tests assessed, but not with number of falls. Test-retest reliability for the ABC-16 and ABC-6 was good to excellent. The ABC-6 is a valid and reliable measure of balance confidence in community-dwelling older adults, and shows stronger relationships to falls than does the ABC-16. The ABC-6 may be a more useful balance confidence assessment tool than the ABC-16. Copyright 2009 Elsevier Ireland Ltd. All rights reserved.

  16. Reliability and safety engineering

    CERN Document Server

    Verma, Ajit Kumar; Karanki, Durga Rao

    2016-01-01

    Reliability and safety are core issues that must be addressed throughout the life cycle of engineering systems. Reliability and Safety Engineering presents an overview of the basic concepts, together with simple and practical illustrations. The authors present reliability terminology in various engineering fields, viz.,electronics engineering, software engineering, mechanical engineering, structural engineering and power systems engineering. The book describes the latest applications in the area of probabilistic safety assessment, such as technical specification optimization, risk monitoring and risk informed in-service inspection. Reliability and safety studies must, inevitably, deal with uncertainty, so the book includes uncertainty propagation methods: Monte Carlo simulation, fuzzy arithmetic, Dempster-Shafer theory and probability bounds. Reliability and Safety Engineering also highlights advances in system reliability and safety assessment including dynamic system modeling and uncertainty management. Cas...

  17. Human reliability analysis

    International Nuclear Information System (INIS)

    Dougherty, E.M.; Fragola, J.R.

    1988-01-01

    The authors present a treatment of human reliability analysis incorporating an introduction to probabilistic risk assessment for nuclear power generating stations. They treat the subject according to the framework established for general systems theory. Draws upon reliability analysis, psychology, human factors engineering, and statistics, integrating elements of these fields within a systems framework. Provides a history of human reliability analysis, and includes examples of the application of the systems approach

  18. Operational safety reliability research

    International Nuclear Information System (INIS)

    Hall, R.E.; Boccio, J.L.

    1986-01-01

    Operating reactor events such as the TMI accident and the Salem automatic-trip failures raised the concern that during a plant's operating lifetime the reliability of systems could degrade from the design level that was considered in the licensing process. To address this concern, NRC is sponsoring the Operational Safety Reliability Research project. The objectives of this project are to identify the essential tasks of a reliability program and to evaluate the effectiveness and attributes of such a reliability program applicable to maintaining an acceptable level of safety during the operating lifetime at the plant

  19. Circuit design for reliability

    CERN Document Server

    Cao, Yu; Wirth, Gilson

    2015-01-01

    This book presents physical understanding, modeling and simulation, on-chip characterization, layout solutions, and design techniques that are effective to enhance the reliability of various circuit units.  The authors provide readers with techniques for state of the art and future technologies, ranging from technology modeling, fault detection and analysis, circuit hardening, and reliability management. Provides comprehensive review on various reliability mechanisms at sub-45nm nodes; Describes practical modeling and characterization techniques for reliability; Includes thorough presentation of robust design techniques for major VLSI design units; Promotes physical understanding with first-principle simulations.

  20. Subcontracting relations and their effects on safety and security in two firms: SNCF and GrDF; Les relations de sous-traitance et leurs effets sur la surete et la securite dans deux entreprises: SNCF et GrDF

    Energy Technology Data Exchange (ETDEWEB)

    Ponnet, Marie

    2011-07-04

    Because of economical processes that tend to move the frontiers of firms salaried relations of uncertain status are found coexisting inside the very same working world. From a qualitative investigation mixing employees' interviews and observations made on SNCF and GrDF working sites our research offers to think about the relations linking subcontracting, maintenance, safety and security. Considering subcontracting as a particular way for professional bodies to be associated allows us to wonder about its effects within a same firm (the 'integrated' subcontracting) as much as between a principal and a provider. Our thesis shows that when change occurs inside the organization - like the creation of new committees of experts or the reorganizing of an old service - security and safety can be impacted because thus professional bodies tend to be reconfigured while modifications affect practices, professional identities and work division. The relations between subcontractors and principal are complicated and their consequences depend from the context they are placed in, determined by a combination of various characteristics such as the confidence level, the available time, the reputation, the position occupied by the subcontractor. Our investigation makes clear that there is no direct link between subcontracting, security and safety. Their effects, in spite of their reality, are submitted to the altering mediation of legal factors (related to economic national and European issues) and concern the working organization as well as the professional identities. (author)

  1. Maintenance optimization plan for essential equipment reliability

    International Nuclear Information System (INIS)

    Steffen, D.H.

    1996-02-01

    The Maintenance Optimization Plan (MOP) for Essential Equipment Reliability will furnish Tank Waste Remediation System (TWRS) management with a pro-active, forward-thinking process for maintaining essential structures, systems, and components (ESSC) at the Hanford Site tank farms in their designed condition, and to ensure optimum ESSC availability and reliability

  2. Equipment Reliability Program in NPP Krsko

    International Nuclear Information System (INIS)

    Skaler, F.; Djetelic, N.

    2006-01-01

    Operation that is safe, reliable, effective and acceptable to public is the common message in a mission statement of commercial nuclear power plants (NPPs). To fulfill these goals, nuclear industry, among other areas, has to focus on: 1 Human Performance (HU) and 2 Equipment Reliability (EQ). The performance objective of HU is as follows: The behaviors of all personnel result in safe and reliable station operation. While unwanted human behaviors in operations mostly result directly in the event, the behavior flaws either in the area of maintenance or engineering usually cause decreased equipment reliability. Unsatisfied Human performance leads even the best designed power plants into significant operating events, which can be found as well-known examples in nuclear industry. Equipment reliability is today recognized as the key to success. While the human performance at most NPPs has been improving since the start of WANO / INPO / IAEA evaluations, the open energy market has forced the nuclear plants to reduce production costs and operate more reliably and effectively. The balance between these two (opposite) goals has made equipment reliability even more important for safe, reliable and efficient production. Insisting on on-line operation by ignoring some principles of safety could nowadays in a well-developed safety culture and human performance environment exceed the cost of electricity losses. In last decade the leading USA nuclear companies put a lot of effort to improve equipment reliability primarily based on INPO Equipment Reliability Program AP-913 at their NPP stations. The Equipment Reliability Program is the key program not only for safe and reliable operation, but also for the Life Cycle Management and Aging Management on the way to the nuclear power plant life extension. The purpose of Equipment Reliability process is to identify, organize, integrate and coordinate equipment reliability activities (preventive and predictive maintenance, maintenance

  3. Reliability of a new questionnaire for the evaluation of habitual physical activity and food consumption in children DOI:10.5007/1980-0037.2010v12n1p21

    Directory of Open Access Journals (Sweden)

    Filipe Ferreira da Costa

    2010-12-01

    Full Text Available The aim of this study was to determine the reliability of the Physical Activity and Food Consumption (PAFC questionnaire in schoolchildren from a private school in Natal-RN, Brazil. A total of 101 children, 57 boys and 44 girls (mean age: 9.4 years, SD: 1.03, range: 7.3 to 11.6 in the second to fourth grade of elementary school were recruited. An expanded version of the PAFC questionnaire was applied at the school by a single researcher, with an average of 15 days between test and retest. The coefficient of relative agreement, intraclass correlation coefficient, Spearman’s correlation coefficient, kappa index of agreement, PABAK, and Wilcoxon signed-rank test were used to determine reliability. In general, relatively consistent measures between the two questionnaire sessions were found for items related to attitude towards exercise (0.41, means of transportation used to travel to and from school (0.79, and the remaining 11 physical activities (0.69. An intraclass correlation of 0.87 as obtained for the overall physical activity index. Twenty-seven of the 42 items presented moderate to good agreement (mean kappa index: 0.51. The PAFC questionnaire showed moderate to good reliability for most of its items and seems to be a suitable instrument for the evaluation of physical activity and food intake behavior in schoolchildren. Moreover, the questionnaire might be used as an alternative for the classification of more and less active individuals as well as for the identification of healthy and inadequate dietary patterns.

  4. Hawaii Electric System Reliability

    Energy Technology Data Exchange (ETDEWEB)

    Loose, Verne William [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Silva Monroy, Cesar Augusto [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2012-08-01

    This report addresses Hawaii electric system reliability issues; greater emphasis is placed on short-term reliability but resource adequacy is reviewed in reference to electric consumers’ views of reliability “worth” and the reserve capacity required to deliver that value. The report begins with a description of the Hawaii electric system to the extent permitted by publicly available data. Electrical engineering literature in the area of electric reliability is researched and briefly reviewed. North American Electric Reliability Corporation standards and measures for generation and transmission are reviewed and identified as to their appropriateness for various portions of the electric grid and for application in Hawaii. Analysis of frequency data supplied by the State of Hawaii Public Utilities Commission is presented together with comparison and contrast of performance of each of the systems for two years, 2010 and 2011. Literature tracing the development of reliability economics is reviewed and referenced. A method is explained for integrating system cost with outage cost to determine the optimal resource adequacy given customers’ views of the value contributed by reliable electric supply. The report concludes with findings and recommendations for reliability in the State of Hawaii.

  5. Hawaii electric system reliability.

    Energy Technology Data Exchange (ETDEWEB)

    Silva Monroy, Cesar Augusto; Loose, Verne William

    2012-09-01

    This report addresses Hawaii electric system reliability issues; greater emphasis is placed on short-term reliability but resource adequacy is reviewed in reference to electric consumers' views of reliability %E2%80%9Cworth%E2%80%9D and the reserve capacity required to deliver that value. The report begins with a description of the Hawaii electric system to the extent permitted by publicly available data. Electrical engineering literature in the area of electric reliability is researched and briefly reviewed. North American Electric Reliability Corporation standards and measures for generation and transmission are reviewed and identified as to their appropriateness for various portions of the electric grid and for application in Hawaii. Analysis of frequency data supplied by the State of Hawaii Public Utilities Commission is presented together with comparison and contrast of performance of each of the systems for two years, 2010 and 2011. Literature tracing the development of reliability economics is reviewed and referenced. A method is explained for integrating system cost with outage cost to determine the optimal resource adequacy given customers' views of the value contributed by reliable electric supply. The report concludes with findings and recommendations for reliability in the State of Hawaii.

  6. Improving machinery reliability

    CERN Document Server

    Bloch, Heinz P

    1998-01-01

    This totally revised, updated and expanded edition provides proven techniques and procedures that extend machinery life, reduce maintenance costs, and achieve optimum machinery reliability. This essential text clearly describes the reliability improvement and failure avoidance steps practiced by best-of-class process plants in the U.S. and Europe.

  7. LED system reliability

    NARCIS (Netherlands)

    Driel, W.D. van; Yuan, C.A.; Koh, S.; Zhang, G.Q.

    2011-01-01

    This paper presents our effort to predict the system reliability of Solid State Lighting (SSL) applications. A SSL system is composed of a LED engine with micro-electronic driver(s) that supplies power to the optic design. Knowledge of system level reliability is not only a challenging scientific

  8. Integrated system reliability analysis

    DEFF Research Database (Denmark)

    Gintautas, Tomas; Sørensen, John Dalsgaard

    Specific targets: 1) The report shall describe the state of the art of reliability and risk-based assessment of wind turbine components. 2) Development of methodology for reliability and risk-based assessment of the wind turbine at system level. 3) Describe quantitative and qualitative measures...

  9. Reliability of neural encoding

    DEFF Research Database (Denmark)

    Alstrøm, Preben; Beierholm, Ulrik; Nielsen, Carsten Dahl

    2002-01-01

    The reliability with which a neuron is able to create the same firing pattern when presented with the same stimulus is of critical importance to the understanding of neuronal information processing. We show that reliability is closely related to the process of phaselocking. Experimental results f...

  10. The relative reliability of actively participating and passively observing raters in a simulation-based assessment for selection to specialty training in anaesthesia.

    Science.gov (United States)

    Roberts, M J; Gale, T C E; Sice, P J A; Anderson, I R

    2013-06-01

    Selection to specialty training is a high-stakes assessment demanding valuable consultant time. In one initial entry level and two higher level anaesthesia selection centres, we investigated the feasibility of using staff participating in simulation scenarios, rather than observing consultants, to rate candidate performance. We compared participant and observer scores using four different outcomes: inter-rater reliability; score distributions; correlation of candidate rankings; and percentage of candidates whose selection might be affected by substituting participants' for observers' ratings. Inter-rater reliability between observers was good (correlation coefficient 0.73-0.96) but lower between participants (correlation coefficient 0.39-0.92), particularly at higher level where participants also rated candidates more favourably than did observers. Station rank orderings were strongly correlated between the rater groups at entry level (rho 0.81, p training posts available. We conclude that using participating raters is feasible at initial entry level only. Anaesthesia © 2013 The Association of Anaesthetists of Great Britain and Ireland.

  11. Design reliability engineering

    International Nuclear Information System (INIS)

    Buden, D.; Hunt, R.N.M.

    1989-01-01

    Improved design techniques are needed to achieve high reliability at minimum cost. This is especially true of space systems where lifetimes of many years without maintenance are needed and severe mass limitations exist. Reliability must be designed into these systems from the start. Techniques are now being explored to structure a formal design process that will be more complete and less expensive. The intent is to integrate the best features of design, reliability analysis, and expert systems to design highly reliable systems to meet stressing needs. Taken into account are the large uncertainties that exist in materials, design models, and fabrication techniques. Expert systems are a convenient method to integrate into the design process a complete definition of all elements that should be considered and an opportunity to integrate the design process with reliability, safety, test engineering, maintenance and operator training. 1 fig

  12. Bayesian methods in reliability

    Science.gov (United States)

    Sander, P.; Badoux, R.

    1991-11-01

    The present proceedings from a course on Bayesian methods in reliability encompasses Bayesian statistical methods and their computational implementation, models for analyzing censored data from nonrepairable systems, the traits of repairable systems and growth models, the use of expert judgment, and a review of the problem of forecasting software reliability. Specific issues addressed include the use of Bayesian methods to estimate the leak rate of a gas pipeline, approximate analyses under great prior uncertainty, reliability estimation techniques, and a nonhomogeneous Poisson process. Also addressed are the calibration sets and seed variables of expert judgment systems for risk assessment, experimental illustrations of the use of expert judgment for reliability testing, and analyses of the predictive quality of software-reliability growth models such as the Weibull order statistics.

  13. A reliability program approach to operational safety

    International Nuclear Information System (INIS)

    Mueller, C.J.; Bezella, W.A.

    1985-01-01

    A Reliability Program (RP) model based on proven reliability techniques is being formulated for potential application in the nuclear power industry. Methods employed under NASA and military direction, commercial airline and related FAA programs were surveyed and a review of current nuclear risk-dominant issues conducted. The need for a reliability approach to address dependent system failures, operating and emergency procedures and human performance, and develop a plant-specific performance data base for safety decision making is demonstrated. Current research has concentrated on developing a Reliability Program approach for the operating phase of a nuclear plant's lifecycle. The approach incorporates performance monitoring and evaluation activities with dedicated tasks that integrate these activities with operation, surveillance, and maintenance of the plant. The detection, root-cause evaluation and before-the-fact correction of incipient or actual systems failures as a mechanism for maintaining plant safety is a major objective of the Reliability Program. (orig./HP)

  14. System reliability of corroding pipelines

    International Nuclear Information System (INIS)

    Zhou Wenxing

    2010-01-01

    A methodology is presented in this paper to evaluate the time-dependent system reliability of a pipeline segment that contains multiple active corrosion defects and is subjected to stochastic internal pressure loading. The pipeline segment is modeled as a series system with three distinctive failure modes due to corrosion, namely small leak, large leak and rupture. The internal pressure is characterized as a simple discrete stochastic process that consists of a sequence of independent and identically distributed random variables each acting over a period of one year. The magnitude of a given sequence follows the annual maximum pressure distribution. The methodology is illustrated through a hypothetical example. Furthermore, the impact of the spatial variability of the pressure loading and pipe resistances associated with different defects on the system reliability is investigated. The analysis results suggest that the spatial variability of pipe properties has a negligible impact on the system reliability. On the other hand, the spatial variability of the internal pressure, initial defect sizes and defect growth rates can have a significant impact on the system reliability.

  15. Reliability of construction materials

    International Nuclear Information System (INIS)

    Merz, H.

    1976-01-01

    One can also speak of reliability with respect to materials. While for reliability of components the MTBF (mean time between failures) is regarded as the main criterium, this is replaced with regard to materials by possible failure mechanisms like physical/chemical reaction mechanisms, disturbances of physical or chemical equilibrium, or other interactions or changes of system. The main tasks of the reliability analysis of materials therefore is the prediction of the various failure reasons, the identification of interactions, and the development of nondestructive testing methods. (RW) [de

  16. Structural Reliability Methods

    DEFF Research Database (Denmark)

    Ditlevsen, Ove Dalager; Madsen, H. O.

    The structural reliability methods quantitatively treat the uncertainty of predicting the behaviour and properties of a structure given the uncertain properties of its geometry, materials, and the actions it is supposed to withstand. This book addresses the probabilistic methods for evaluation...... of structural reliability, including the theoretical basis for these methods. Partial safety factor codes under current practice are briefly introduced and discussed. A probabilistic code format for obtaining a formal reliability evaluation system that catches the most essential features of the nature...... of the uncertainties and their interplay is the developed, step-by-step. The concepts presented are illustrated by numerous examples throughout the text....

  17. Reliability and mechanical design

    International Nuclear Information System (INIS)

    Lemaire, Maurice

    1997-01-01

    A lot of results in mechanical design are obtained from a modelisation of physical reality and from a numerical solution which would lead to the evaluation of needs and resources. The goal of the reliability analysis is to evaluate the confidence which it is possible to grant to the chosen design through the calculation of a probability of failure linked to the retained scenario. Two types of analysis are proposed: the sensitivity analysis and the reliability analysis. Approximate methods are applicable to problems related to reliability, availability, maintainability and safety (RAMS)

  18. RTE - 2013 Reliability Report

    International Nuclear Information System (INIS)

    Denis, Anne-Marie

    2014-01-01

    RTE publishes a yearly reliability report based on a standard model to facilitate comparisons and highlight long-term trends. The 2013 report is not only stating the facts of the Significant System Events (ESS), but it moreover underlines the main elements dealing with the reliability of the electrical power system. It highlights the various elements which contribute to present and future reliability and provides an overview of the interaction between the various stakeholders of the Electrical Power System on the scale of the European Interconnected Network. (author)

  19. Structural Reliability Analysis of Wind Turbines: A Review

    Directory of Open Access Journals (Sweden)

    Zhiyu Jiang

    2017-12-01

    Full Text Available The paper presents a detailed review of the state-of-the-art research activities on structural reliability analysis of wind turbines between the 1990s and 2017. We describe the reliability methods including the first- and second-order reliability methods and the simulation reliability methods and show the procedure for and application areas of structural reliability analysis of wind turbines. Further, we critically review the various structural reliability studies on rotor blades, bottom-fixed support structures, floating systems and mechanical and electrical components. Finally, future applications of structural reliability methods to wind turbine designs are discussed.

  20. Approach to reliability assessment

    International Nuclear Information System (INIS)

    Green, A.E.; Bourne, A.J.

    1975-01-01

    Experience has shown that reliability assessments can play an important role in the early design and subsequent operation of technological systems where reliability is at a premium. The approaches to and techniques for such assessments, which have been outlined in the paper, have been successfully applied in variety of applications ranging from individual equipments to large and complex systems. The general approach involves the logical and systematic establishment of the purpose, performance requirements and reliability criteria of systems. This is followed by an appraisal of likely system achievment based on the understanding of different types of variational behavior. A fundamental reliability model emerges from the correlation between the appropriate Q and H functions for performance requirement and achievement. This model may cover the complete spectrum of performance behavior in all the system dimensions

  1. Incorporating travel time reliability into the Highway Capacity Manual.

    Science.gov (United States)

    2014-01-01

    This final report documents the activities performed during SHRP 2 Reliability Project L08: Incorporating Travel Time Reliability into the Highway Capacity Manual. It serves as a supplement to the proposed chapters for incorporating travel time relia...

  2. The rating reliability calculator

    Directory of Open Access Journals (Sweden)

    Solomon David J

    2004-04-01

    Full Text Available Abstract Background Rating scales form an important means of gathering evaluation data. Since important decisions are often based on these evaluations, determining the reliability of rating data can be critical. Most commonly used methods of estimating reliability require a complete set of ratings i.e. every subject being rated must be rated by each judge. Over fifty years ago Ebel described an algorithm for estimating the reliability of ratings based on incomplete data. While his article has been widely cited over the years, software based on the algorithm is not readily available. This paper describes an easy-to-use Web-based utility for estimating the reliability of ratings based on incomplete data using Ebel's algorithm. Methods The program is available public use on our server and the source code is freely available under GNU General Public License. The utility is written in PHP, a common open source imbedded scripting language. The rating data can be entered in a convenient format on the user's personal computer that the program will upload to the server for calculating the reliability and other statistics describing the ratings. Results When the program is run it displays the reliability, number of subject rated, harmonic mean number of judges rating each subject, the mean and standard deviation of the averaged ratings per subject. The program also displays the mean, standard deviation and number of ratings for each subject rated. Additionally the program will estimate the reliability of an average of a number of ratings for each subject via the Spearman-Brown prophecy formula. Conclusion This simple web-based program provides a convenient means of estimating the reliability of rating data without the need to conduct special studies in order to provide complete rating data. I would welcome other researchers revising and enhancing the program.

  3. Reliability and maintainability

    International Nuclear Information System (INIS)

    1994-01-01

    Several communications in this conference are concerned with nuclear plant reliability and maintainability; their titles are: maintenance optimization of stand-by Diesels of 900 MW nuclear power plants; CLAIRE: an event-based simulation tool for software testing; reliability as one important issue within the periodic safety review of nuclear power plants; design of nuclear building ventilation by the means of functional analysis; operation characteristic analysis for a power industry plant park, as a function of influence parameters

  4. Reliability data book

    International Nuclear Information System (INIS)

    Bento, J.P.; Boerje, S.; Ericsson, G.; Hasler, A.; Lyden, C.O.; Wallin, L.; Poern, K.; Aakerlund, O.

    1985-01-01

    The main objective for the report is to improve failure data for reliability calculations as parts of safety analyses for Swedish nuclear power plants. The work is based primarily on evaluations of failure reports as well as information provided by the operation and maintenance staff of each plant. In the report are presented charts of reliability data for: pumps, valves, control rods/rod drives, electrical components, and instruments. (L.E.)

  5. Multidisciplinary System Reliability Analysis

    Science.gov (United States)

    Mahadevan, Sankaran; Han, Song; Chamis, Christos C. (Technical Monitor)

    2001-01-01

    The objective of this study is to develop a new methodology for estimating the reliability of engineering systems that encompass multiple disciplines. The methodology is formulated in the context of the NESSUS probabilistic structural analysis code, developed under the leadership of NASA Glenn Research Center. The NESSUS code has been successfully applied to the reliability estimation of a variety of structural engineering systems. This study examines whether the features of NESSUS could be used to investigate the reliability of systems in other disciplines such as heat transfer, fluid mechanics, electrical circuits etc., without considerable programming effort specific to each discipline. In this study, the mechanical equivalence between system behavior models in different disciplines are investigated to achieve this objective. A new methodology is presented for the analysis of heat transfer, fluid flow, and electrical circuit problems using the structural analysis routines within NESSUS, by utilizing the equivalence between the computational quantities in different disciplines. This technique is integrated with the fast probability integration and system reliability techniques within the NESSUS code, to successfully compute the system reliability of multidisciplinary systems. Traditional as well as progressive failure analysis methods for system reliability estimation are demonstrated, through a numerical example of a heat exchanger system involving failure modes in structural, heat transfer and fluid flow disciplines.

  6. Analysis and Application of Reliability

    International Nuclear Information System (INIS)

    Jeong, Hae Seong; Park, Dong Ho; Kim, Jae Ju

    1999-05-01

    This book tells of analysis and application of reliability, which includes definition, importance and historical background of reliability, function of reliability and failure rate, life distribution and assumption of reliability, reliability of unrepaired system, reliability of repairable system, sampling test of reliability, failure analysis like failure analysis by FEMA and FTA, and cases, accelerated life testing such as basic conception, acceleration and acceleration factor, and analysis of accelerated life testing data, maintenance policy about alternation and inspection.

  7. Job analysis of the instrument and control technician position for the nuclear power plant maintenance personnel reliability model

    International Nuclear Information System (INIS)

    Siegel, A.I.; Bartter, W.D.; Federman, P.J.

    1983-08-01

    This report is one of a series that is planned to describe the results of a program undertaken by the Oak Ridge National Laboratory (ORNL) for the US Nuclear Regulatory Commission, Office of Nuclear Regulatory Research, to define, develop, validate, and disseminate a methodology for the quantitative prediction of human reliability in the conduct of maintenance tasks in nuclear power plants (NPPs). ORNL has subcontracted portions of this effort to Applied Psychological Services, Inc. This report on the job analysis of the Instrument and Control technician (NUREG/CR-3274) and a report on the job analysis of the electrician position (NUREG/CR-3275) comprise a part of the initial efforts of the development phase of this program. With the publication of the job analysis of the electrician position, the series of job analyses reports addressing nuclear power plant maintenance personnel will be complete. Subsequent reports addressing model development and validation are planned

  8. Equipment Reliability Process in Krsko NPP

    International Nuclear Information System (INIS)

    Gluhak, M.

    2016-01-01

    To ensure long-term safe and reliable plant operation, equipment operability and availability must also be ensured by setting a group of processes to be established within the nuclear power plant. Equipment reliability process represents the integration and coordination of important equipment reliability activities into one process, which enables equipment performance and condition monitoring, preventive maintenance activities development, implementation and optimization, continuous improvement of the processes and long term planning. The initiative for introducing systematic approach for equipment reliability assuring came from US nuclear industry guided by INPO (Institute of Nuclear Power Operations) and by participation of several US nuclear utilities. As a result of the initiative, first edition of INPO document AP-913, 'Equipment Reliability Process Description' was issued and it became a basic document for implementation of equipment reliability process for the whole nuclear industry. The scope of equipment reliability process in Krsko NPP consists of following programs: equipment criticality classification, preventive maintenance program, corrective action program, system health reports and long-term investment plan. By implementation, supervision and continuous improvement of those programs, guided by more than thirty years of operating experience, Krsko NPP will continue to be on a track of safe and reliable operation until the end of prolonged life time. (author).

  9. [Inhibition rate of gamma-aminolevulinic acid dehydratase activity in erythrocytes as a reliable index for individual workers of low lead exposure].

    Science.gov (United States)

    Hirano, H; Omichi, M; Ohishi, H; Ishikawa, K; Hirashima, N

    1983-09-01

    As the delta-aminolevulinic acid dehydratase (ALAD) activity in erythrocytes is decreased by lead exposure, we considered that a net reduction of ALAD activity by lead in blood should be the difference between the activity fully activated with zinc (Zn2+) and dithiothreitol (DTT) and that without activation. The optimal condition of activation of ALAD was found by addition of 0.25 mM of Zn2+ and 10 mM of DTT in the reaction mixture. Judging from our previous results that the amount of inhibition of ALAD activity can be represented as the rate of inhibition and is closely correlated with the dose of lead administered to rabbits, the inhibition rate of ALAD activity and lead content in blood (Pb-B) of lead workers were measured. The scatter diagram obtained from the inhibition rate and lead content in blood has two groups being divided at 50 micrograms/ml of Pb-B. In one group less than 50 micrograms/100 ml of Pb-B, the inhibition rate has been closely related to Pb-B., the regression equation being Y = 1.82 X + 11.7, and the correlation coefficient + 0.926. In another group more than 50 micrograms/100 ml of Pb-B the inhibition rate remained constant at the 90% level. Measurement of the inhibition rate suggests to have practical validity for monitoring lead exposure in workers, and by means of a nomograph lead content in blood can be estimated from the inhibition rate.

  10. Safety and reliability criteria

    International Nuclear Information System (INIS)

    O'Neil, R.

    1978-01-01

    Nuclear power plants and, in particular, reactor pressure boundary components have unique reliability requirements, in that usually no significant redundancy is possible, and a single failure can give rise to possible widespread core damage and fission product release. Reliability may be required for availability or safety reasons, but in the case of the pressure boundary and certain other systems safety may dominate. Possible Safety and Reliability (S and R) criteria are proposed which would produce acceptable reactor design. Without some S and R requirement the designer has no way of knowing how far he must go in analysing his system or component, or whether his proposed solution is likely to gain acceptance. The paper shows how reliability targets for given components and systems can be individually considered against the derived S and R criteria at the design and construction stage. Since in the case of nuclear pressure boundary components there is often very little direct experience on which to base reliability studies, relevant non-nuclear experience is examined. (author)

  11. Proposed reliability cost model

    Science.gov (United States)

    Delionback, L. M.

    1973-01-01

    The research investigations which were involved in the study include: cost analysis/allocation, reliability and product assurance, forecasting methodology, systems analysis, and model-building. This is a classic example of an interdisciplinary problem, since the model-building requirements include the need for understanding and communication between technical disciplines on one hand, and the financial/accounting skill categories on the other. The systems approach is utilized within this context to establish a clearer and more objective relationship between reliability assurance and the subcategories (or subelements) that provide, or reenforce, the reliability assurance for a system. Subcategories are further subdivided as illustrated by a tree diagram. The reliability assurance elements can be seen to be potential alternative strategies, or approaches, depending on the specific goals/objectives of the trade studies. The scope was limited to the establishment of a proposed reliability cost-model format. The model format/approach is dependent upon the use of a series of subsystem-oriented CER's and sometimes possible CTR's, in devising a suitable cost-effective policy.

  12. Quality and reliability management and its applications

    CERN Document Server

    2016-01-01

    Integrating development processes, policies, and reliability predictions from the beginning of the product development lifecycle to ensure high levels of product performance and safety, this book helps companies overcome the challenges posed by increasingly complex systems in today’s competitive marketplace.   Examining both research on and practical aspects of product quality and reliability management with an emphasis on applications, the book features contributions written by active researchers and/or experienced practitioners in the field, so as to effectively bridge the gap between theory and practice and address new research challenges in reliability and quality management in practice.    Postgraduates, researchers and practitioners in the areas of reliability engineering and management, amongst others, will find the book to offer a state-of-the-art survey of quality and reliability management and practices.

  13. Including Youth with Intellectual Disabilities in Health Promotion Research: Development and Reliability of a Structured Interview to Assess the Correlates of Physical Activity among Youth

    Science.gov (United States)

    Curtin, Carol; Bandini, Linda G.; Must, Aviva; Phillips, Sarah; Maslin, Melissa C. T.; Lo, Charmaine; Gleason, James M.; Fleming, Richard K.; Stanish, Heidi I.

    2016-01-01

    Background: The input of youth with intellectual disabilities in health promotion and health disparities research is essential for understanding their needs and preferences. Regular physical activity (PA) is vital for health and well-being, but levels are low in youth generally, including those with intellectual disabilities. Understanding the…

  14. Reliability Centered Maintenance - Methodologies

    Science.gov (United States)

    Kammerer, Catherine C.

    2009-01-01

    Journal article about Reliability Centered Maintenance (RCM) methodologies used by United Space Alliance, LLC (USA) in support of the Space Shuttle Program at Kennedy Space Center. The USA Reliability Centered Maintenance program differs from traditional RCM programs because various methodologies are utilized to take advantage of their respective strengths for each application. Based on operational experience, USA has customized the traditional RCM methodology into a streamlined lean logic path and has implemented the use of statistical tools to drive the process. USA RCM has integrated many of the L6S tools into both RCM methodologies. The tools utilized in the Measure, Analyze, and Improve phases of a Lean Six Sigma project lend themselves to application in the RCM process. All USA RCM methodologies meet the requirements defined in SAE JA 1011, Evaluation Criteria for Reliability-Centered Maintenance (RCM) Processes. The proposed article explores these methodologies.

  15. Issues in cognitive reliability

    International Nuclear Information System (INIS)

    Woods, D.D.; Hitchler, M.J.; Rumancik, J.A.

    1984-01-01

    This chapter examines some problems in current methods to assess reactor operator reliability at cognitive tasks and discusses new approaches to solve these problems. The two types of human failures are errors in the execution of an intention and errors in the formation/selection of an intention. Topics considered include the types of description, error correction, cognitive performance and response time, the speed-accuracy tradeoff function, function based task analysis, and cognitive task analysis. One problem of human reliability analysis (HRA) techniques in general is the question of what are the units of behavior whose reliability are to be determined. A second problem for HRA is that people often detect and correct their errors. The use of function based analysis, which maps the problem space for plant control, is recommended

  16. Reliability issues in PACS

    Science.gov (United States)

    Taira, Ricky K.; Chan, Kelby K.; Stewart, Brent K.; Weinberg, Wolfram S.

    1991-07-01

    Reliability is an increasing concern when moving PACS from the experimental laboratory to the clinical environment. Any system downtime may seriously affect patient care. The authors report on the several classes of errors encountered during the pre-clinical release of the PACS during the past several months and present the solutions implemented to handle them. The reliability issues discussed include: (1) environmental precautions, (2) database backups, (3) monitor routines of critical resources and processes, (4) hardware redundancy (networks, archives), and (5) development of a PACS quality control program.

  17. Reliability Parts Derating Guidelines

    Science.gov (United States)

    1982-06-01

    226-30, October 1974. 66 I, 26. "Reliability of GAAS Injection Lasers", De Loach , B. C., Jr., 1973 IEEE/OSA Conference on Laser Engineering and...Vol. R-23, No. 4, 226-30, October 1974. 28. "Reliability of GAAS Injection Lasers", De Loach , B. C., Jr., 1973 IEEE/OSA Conference on Laser...opnatien ot 󈨊 deg C, mounted on a 4-inach square 0.250~ inch thick al~loy alum~nusi panel.. This mounting technique should be L~ ken into cunoidur~tiou

  18. Construct validity and inter-rater reliability of the Dutch activity measure for post-acute care "6-clicks" basic mobility form to assess the mobility of hospitalized patients.

    Science.gov (United States)

    Geelen, Sven Jacobus Gertruda; Valkenet, Karin; Veenhof, Cindy

    2018-05-12

    To evaluate the construct validity and the inter-rater reliability of the Dutch Activity Measure for Post-Acute Care "6-clicks" Basic Mobility short form measuring the patient's mobility in Dutch hospital care. First, the "6-clicks" was translated by using a forward-backward translation protocol. Next, 64 patients were assessed by the physiotherapist to determine the validity while being admitted to the Internal Medicine wards of a university medical center. Six hypotheses were tested regarding the construct "mobility" which showed that: Better "6-clicks" scores were related to less restrictive pre-admission living situations (p = 0.011), less restrictive discharge locations (p = 0.001), more independence in activities of daily living (p = 0.001) and less physiotherapy visits (p Dutch "6-clicks" shows a good construct validity and moderate-to-excellent inter-rater reliability when used to assess the mobility of hospitalized patients. Implications for Rehabilitation Even though various measurement tools have been developed, it appears the majority of physiotherapists working in a hospital currently do not use these tools as a standard part of their care. The Activity Measure for Post-Acute Care "6-clicks" Basic Mobility is the only tool which is designed to be short, easy to use within usual care and has been validated in the entire hospital population. This study shows that the Dutch version of the Activity Measure for Post-Acute Care "6-clicks" Basic Mobility form is a valid, easy to use, quick tool to assess the basic mobility of Dutch hospitalized patients.

  19. Reliability in individual monitoring service.

    Science.gov (United States)

    Mod Ali, N

    2011-03-01

    As a laboratory certified to ISO 9001:2008 and accredited to ISO/IEC 17025, the Secondary Standard Dosimetry Laboratory (SSDL)-Nuclear Malaysia has incorporated an overall comprehensive system for technical and quality management in promoting a reliable individual monitoring service (IMS). Faster identification and resolution of issues regarding dosemeter preparation and issuing of reports, personnel enhancement, improved customer satisfaction and overall efficiency of laboratory activities are all results of the implementation of an effective quality system. Review of these measures and responses to observed trends provide continuous improvement of the system. By having these mechanisms, reliability of the IMS can be assured in the promotion of safe behaviour at all levels of the workforce utilising ionising radiation facilities. Upgradation of in the reporting program through a web-based e-SSDL marks a major improvement in Nuclear Malaysia's IMS reliability on the whole. The system is a vital step in providing a user friendly and effective occupational exposure evaluation program in the country. It provides a higher level of confidence in the results generated for occupational dose monitoring of the IMS, thus, enhances the status of the radiation protection framework of the country.

  20. Operator reliability assessment system (OPERAS)

    International Nuclear Information System (INIS)

    Singh, A.; Spurgin, A.J.; Martin, T.; Welsch, J.; Hallam, J.W.

    1991-01-01

    OPERAS is a personal-computer (PC) based software to collect and process simulator data on control-room operators responses during requalification training scenarios. The data collection scheme is based upon approach developed earlier during the EPRI Operator Reliability Experiments project. The software allows automated data collection from simulator, thus minimizing simulator staff time and resources to collect, maintain and process data which can be useful in monitoring, assessing and enhancing the progress of crew reliability and effectiveness. The system is designed to provide the data and output information in the form of user-friendly charts, tables and figures for use by plant staff. OPERAS prototype software has been implemented at the Diablo Canyon (PWR) and Millstone (BWR) plants and is currently being used to collect operator response data. Data collected from similator include plant-state variables such as reactor pressure and temperature, malfunction, times at which annunciators are activated, operator actions and observations of crew behavior by training staff. The data and systematic analytical results provided by the OPERAS system can contribute to increase objectivity by the utility probabilistic risk analysis (PRA) and training staff in monitoring and assessing reliability of their crews

  1. Computer-aided reliability and risk assessment

    International Nuclear Information System (INIS)

    Leicht, R.; Wingender, H.J.

    1989-01-01

    Activities in the fields of reliability and risk analyses have led to the development of particular software tools which now are combined in the PC-based integrated CARARA system. The options available in this system cover a wide range of reliability-oriented tasks, like organizing raw failure data in the component/event data bank FDB, performing statistical analysis of those data with the program FDA, managing the resulting parameters in the reliability data bank RDB, and performing fault tree analysis with the fault tree code FTL or evaluating the risk of toxic or radioactive material release with the STAR code. (orig.)

  2. Assessing the reliability of skilled performance

    International Nuclear Information System (INIS)

    Dougherty, E.M.; Collins, E.P.

    1996-01-01

    In some high-hazard military tasks, precision of motor skills is crucial to avoid a risk-sensitive drop or other mishap. Sparse data supports a basic level of reliability for this activity seemingly much lower than typical, individual action, slip-mode errors would yield. A typical occurrence failure rate seems to be of the order of 1 x 10 -5 per opportunity. A speculation is tendered that this represents a difference in kind; that the reliability of skills is a different taxon than previously called out in the typical scheme of human reliability

  3. Columbus safety and reliability

    Science.gov (United States)

    Longhurst, F.; Wessels, H.

    1988-10-01

    Analyses carried out to ensure Columbus reliability, availability, and maintainability, and operational and design safety are summarized. Failure modes/effects/criticality is the main qualitative tool used. The main aspects studied are fault tolerance, hazard consequence control, risk minimization, human error effects, restorability, and safe-life design.

  4. Reliability versus reproducibility

    International Nuclear Information System (INIS)

    Lautzenheiser, C.E.

    1976-01-01

    Defect detection and reproducibility of results are two separate but closely related subjects. It is axiomatic that a defect must be detected from examination to examination or reproducibility of results is very poor. On the other hand, a defect can be detected on each of subsequent examinations for higher reliability and still have poor reproducibility of results

  5. Power transformer reliability modelling

    NARCIS (Netherlands)

    Schijndel, van A.

    2010-01-01

    Problem description Electrical power grids serve to transport and distribute electrical power with high reliability and availability at acceptable costs and risks. These grids play a crucial though preferably invisible role in supplying sufficient power in a convenient form. Today’s society has

  6. Designing reliability into accelerators

    International Nuclear Information System (INIS)

    Hutton, A.

    1992-08-01

    For the next generation of high performance, high average luminosity colliders, the ''factories,'' reliability engineering must be introduced right at the inception of the project and maintained as a central theme throughout the project. There are several aspects which will be addressed separately: Concept; design; motivation; management techniques; and fault diagnosis

  7. Proof tests on reliability

    International Nuclear Information System (INIS)

    Mishima, Yoshitsugu

    1983-01-01

    In order to obtain public understanding on nuclear power plants, tests should be carried out to prove the reliability and safety of present LWR plants. For example, the aseismicity of nuclear power plants must be verified by using a large scale earthquake simulator. Reliability test began in fiscal 1975, and the proof tests on steam generators and on PWR support and flexure pins against stress corrosion cracking have already been completed, and the results have been internationally highly appreciated. The capacity factor of the nuclear power plant operation in Japan rose to 80% in the summer of 1983, and considering the period of regular inspection, it means the operation of almost full capacity. Japanese LWR technology has now risen to the top place in the world after having overcome the defects. The significance of the reliability test is to secure the functioning till the age limit is reached, to confirm the correct forecast of deteriorating process, to confirm the effectiveness of the remedy to defects and to confirm the accuracy of predicting the behavior of facilities. The reliability of nuclear valves, fuel assemblies, the heat affected zones in welding, reactor cooling pumps and electric instruments has been tested or is being tested. (Kako, I.)

  8. Reliability and code level

    NARCIS (Netherlands)

    Kasperski, M.; Geurts, C.P.W.

    2005-01-01

    The paper describes the work of the IAWE Working Group WBG - Reliability and Code Level, one of the International Codification Working Groups set up at ICWE10 in Copenhagen. The following topics are covered: sources of uncertainties in the design wind load, appropriate design target values for the

  9. Reliability of Plastic Slabs

    DEFF Research Database (Denmark)

    Thoft-Christensen, Palle

    1989-01-01

    In the paper it is shown how upper and lower bounds for the reliability of plastic slabs can be determined. For the fundamental case it is shown that optimal bounds of a deterministic and a stochastic analysis are obtained on the basis of the same failure mechanisms and the same stress fields....

  10. Reliability based structural design

    NARCIS (Netherlands)

    Vrouwenvelder, A.C.W.M.

    2014-01-01

    According to ISO 2394, structures shall be designed, constructed and maintained in such a way that they are suited for their use during the design working life in an economic way. To fulfil this requirement one needs insight into the risk and reliability under expected and non-expected actions. A

  11. Travel time reliability modeling.

    Science.gov (United States)

    2011-07-01

    This report includes three papers as follows: : 1. Guo F., Rakha H., and Park S. (2010), "A Multi-state Travel Time Reliability Model," : Transportation Research Record: Journal of the Transportation Research Board, n 2188, : pp. 46-54. : 2. Park S.,...

  12. Reliability and Model Fit

    Science.gov (United States)

    Stanley, Leanne M.; Edwards, Michael C.

    2016-01-01

    The purpose of this article is to highlight the distinction between the reliability of test scores and the fit of psychometric measurement models, reminding readers why it is important to consider both when evaluating whether test scores are valid for a proposed interpretation and/or use. It is often the case that an investigator judges both the…

  13. Parametric Mass Reliability Study

    Science.gov (United States)

    Holt, James P.

    2014-01-01

    The International Space Station (ISS) systems are designed based upon having redundant systems with replaceable orbital replacement units (ORUs). These ORUs are designed to be swapped out fairly quickly, but some are very large, and some are made up of many components. When an ORU fails, it is replaced on orbit with a spare; the failed unit is sometimes returned to Earth to be serviced and re-launched. Such a system is not feasible for a 500+ day long-duration mission beyond low Earth orbit. The components that make up these ORUs have mixed reliabilities. Components that make up the most mass-such as computer housings, pump casings, and the silicon board of PCBs-typically are the most reliable. Meanwhile components that tend to fail the earliest-such as seals or gaskets-typically have a small mass. To better understand the problem, my project is to create a parametric model that relates both the mass of ORUs to reliability, as well as the mass of ORU subcomponents to reliability.

  14. Use of reliability in the LMFBR industry

    International Nuclear Information System (INIS)

    Penland, J.R.; Smith, A.M.; Goeser, D.K.

    1977-01-01

    This mission of a Reliability Program for an LMFBR should be to enhance the design and operational characteristics relative to safety and to plant availability. Successful accomplishment of this mission requires proper integration of several reliability engineering tasks--analysis, testing, parts controls and program controls. Such integration requires, in turn, that the program be structured, planned and managed. This paper describes the technical integration necessary and the management activities required to achieve mission success for LMFBR's

  15. Reliability testing of failed fuel location system

    International Nuclear Information System (INIS)

    Vieru, G.

    1996-01-01

    This paper presents the experimental reliability tests performed in order to prove the reliability parameters for Failed Fuel Location System (FFLS), equipment used to detect in which channel of a particular heat transport loop a fuel failure is located, and to find in which channel what particular bundle pair is failed. To do so, D20 samples from each reactor channel are sequentially monitored to detect a comparatively high level of delayed neutron activity. 15 refs, 8 figs, 2 tabs

  16. Reliability Approach of a Compressor System using Reliability Block ...

    African Journals Online (AJOL)

    pc

    2018-03-05

    Mar 5, 2018 ... This paper presents a reliability analysis of such a system using reliability ... Keywords-compressor system, reliability, reliability block diagram, RBD .... the same structure has been kept with the three subsystems: air flow, oil flow and .... and Safety in Engineering Design", Springer, 2009. [3] P. O'Connor ...

  17. Efficient and reliable inspection through the use of optimised NDT

    International Nuclear Information System (INIS)

    Highmore, P.J.

    1993-01-01

    Current activities within AEA Technology are described aiming at the constitution of an optimized and reliable inspection technology for the UK nuclear programme. Three main factors, i.e. optimized inspection design, efficient inspection reliability assessment and effective inspector training, influencing the efficiency and reliability of the on-site inspection are discussed. (Z.S.)

  18. Security-Reliability Analysis of Noma-Based Multi-Hop Relay Networks in Presence of an Active Eavesdropper with Imperfect Eavesdropping CSI

    Directory of Open Access Journals (Sweden)

    Tran Tin Phu

    2017-01-01

    Full Text Available In this paper, we evaluate system performances of a multi-hop relay protocol with presence of an active eavesdropper. In the proposed protocol, a source attempts to transmit its data to a destination with assistance of multiple intermediate relays. From the eavesdropping Channel State Information (CSI estimated, the source and relays adjust their transmit power so that the eavesdropper cannot overhear the transmitted data. Moreover, to enhance throughput for the proposed system, Non-Orthogonal Multiple Access (NOMA technique with a simple power allocation is also proposed. We derive exact closed-form expressions of the Outage Probability (OP and throughput for the data transmission over Rayleigh fading channel. In addition, when the CSI estimation is imperfect, Intercept Probability (IP at the eavesdropper is derived. Finally, Monte Carlo simulations are presented to verify the theoretical derivations.

  19. Reliability in the utility computing era: Towards reliable Fog computing

    DEFF Research Database (Denmark)

    Madsen, Henrik; Burtschy, Bernard; Albeanu, G.

    2013-01-01

    This paper considers current paradigms in computing and outlines the most important aspects concerning their reliability. The Fog computing paradigm as a non-trivial extension of the Cloud is considered and the reliability of the networks of smart devices are discussed. Combining the reliability...... requirements of grid and cloud paradigms with the reliability requirements of networks of sensor and actuators it follows that designing a reliable Fog computing platform is feasible....

  20. RTE - Reliability report 2016

    International Nuclear Information System (INIS)

    2017-06-01

    Every year, RTE produces a reliability report for the past year. This document lays out the main factors that affected the electrical power system's operational reliability in 2016 and the initiatives currently under way intended to ensure its reliability in the future. Within a context of the energy transition, changes to the European interconnected network mean that RTE has to adapt on an on-going basis. These changes include the increase in the share of renewables injecting an intermittent power supply into networks, resulting in a need for flexibility, and a diversification in the numbers of stakeholders operating in the energy sector and changes in the ways in which they behave. These changes are dramatically changing the structure of the power system of tomorrow and the way in which it will operate - particularly the way in which voltage and frequency are controlled, as well as the distribution of flows, the power system's stability, the level of reserves needed to ensure supply-demand balance, network studies, assets' operating and control rules, the tools used and the expertise of operators. The results obtained in 2016 are evidence of a globally satisfactory level of reliability for RTE's operations in somewhat demanding circumstances: more complex supply-demand balance management, cross-border schedules at interconnections indicating operation that is closer to its limits and - most noteworthy - having to manage a cold spell just as several nuclear power plants had been shut down. In a drive to keep pace with the changes expected to occur in these circumstances, RTE implemented numerous initiatives to ensure high levels of reliability: - maintaining investment levels of euro 1.5 billion per year; - increasing cross-zonal capacity at borders with our neighbouring countries, thus bolstering the security of our electricity supply; - implementing new mechanisms (demand response, capacity mechanism, interruptibility, etc.); - involvement in tests or projects

  1. Virtual reality and neuropsychological assessment: The reliability of a virtual kitchen to assess daily-life activities in victims of traumatic brain injury.

    Science.gov (United States)

    Besnard, Jeremy; Richard, Paul; Banville, Frederic; Nolin, Pierre; Aubin, Ghislaine; Le Gall, Didier; Richard, Isabelle; Allain, Phillippe

    2016-01-01

    Traumatic brain injury (TBI) causes impairments affecting instrumental activities of daily living (IADL). However, few studies have considered virtual reality as an ecologically valid tool for the assessment of IADL in patients who have sustained a TBI. The main objective of the present study was to examine the use of the Nonimmersive Virtual Coffee Task (NI-VCT) for IADL assessment in patients with TBI. We analyzed the performance of 19 adults suffering from TBI and 19 healthy controls (HCs) in the real and virtual tasks of making coffee with a coffee machine, as well as in global IQ and executive functions. Patients performed worse than HCs on both real and virtual tasks and on all tests of executive functions. Correlation analyses revealed that NI-VCT scores were related to scores on the real task. Moreover, regression analyses demonstrated that performance on NI-VCT matched real-task performance. Our results support the idea that the virtual kitchen is a valid tool for IADL assessment in patients who have sustained a TBI.

  2. Waste package reliability analysis

    International Nuclear Information System (INIS)

    Pescatore, C.; Sastre, C.

    1983-01-01

    Proof of future performance of a complex system such as a high-level nuclear waste package over a period of hundreds to thousands of years cannot be had in the ordinary sense of the word. The general method of probabilistic reliability analysis could provide an acceptable framework to identify, organize, and convey the information necessary to satisfy the criterion of reasonable assurance of waste package performance according to the regulatory requirements set forth in 10 CFR 60. General principles which may be used to evaluate the qualitative and quantitative reliability of a waste package design are indicated and illustrated with a sample calculation of a repository concept in basalt. 8 references, 1 table

  3. Accelerator reliability workshop

    Energy Technology Data Exchange (ETDEWEB)

    Hardy, L; Duru, Ph; Koch, J M; Revol, J L; Van Vaerenbergh, P; Volpe, A M; Clugnet, K; Dely, A; Goodhew, D

    2002-07-01

    About 80 experts attended this workshop, which brought together all accelerator communities: accelerator driven systems, X-ray sources, medical and industrial accelerators, spallation sources projects (American and European), nuclear physics, etc. With newly proposed accelerator applications such as nuclear waste transmutation, replacement of nuclear power plants and others. Reliability has now become a number one priority for accelerator designers. Every part of an accelerator facility from cryogenic systems to data storage via RF systems are concerned by reliability. This aspect is now taken into account in the design/budget phase, especially for projects whose goal is to reach no more than 10 interruptions per year. This document gathers the slides but not the proceedings of the workshop.

  4. Reliability and construction control

    Directory of Open Access Journals (Sweden)

    Sherif S. AbdelSalam

    2016-06-01

    Full Text Available The goal of this study was to determine the most reliable and efficient combination of design and construction methods required for vibro piles. For a wide range of static and dynamic formulas, the reliability-based resistance factors were calculated using EGYPT database, which houses load test results for 318 piles. The analysis was extended to introduce a construction control factor that determines the variation between the pile nominal capacities calculated using static versus dynamic formulae. From the major outcomes, the lowest coefficient of variation is associated with Davisson’s criterion, and the resistance factors calculated for the AASHTO method are relatively high compared with other methods. Additionally, the CPT-Nottingham and Schmertmann method provided the most economic design. Recommendations related to a pile construction control factor were also presented, and it was found that utilizing the factor can significantly reduce variations between calculated and actual capacities.

  5. Scyllac equipment reliability analysis

    International Nuclear Information System (INIS)

    Gutscher, W.D.; Johnson, K.J.

    1975-01-01

    Most of the failures in Scyllac can be related to crowbar trigger cable faults. A new cable has been designed, procured, and is currently undergoing evaluation. When the new cable has been proven, it will be worked into the system as quickly as possible without causing too much additional down time. The cable-tip problem may not be easy or even desirable to solve. A tightly fastened permanent connection that maximizes contact area would be more reliable than the plug-in type of connection in use now, but it would make system changes and repairs much more difficult. The balance of the failures have such a low occurrence rate that they do not cause much down time and no major effort is underway to eliminate them. Even though Scyllac was built as an experimental system and has many thousands of components, its reliability is very good. Because of this the experiment has been able to progress at a reasonable pace

  6. Improving Power Converter Reliability

    DEFF Research Database (Denmark)

    Ghimire, Pramod; de Vega, Angel Ruiz; Beczkowski, Szymon

    2014-01-01

    of a high-power IGBT module during converter operation, which may play a vital role in improving the reliability of the power converters. The measured voltage is used to estimate the module average junction temperature of the high and low-voltage side of a half-bridge IGBT separately in every fundamental......The real-time junction temperature monitoring of a high-power insulated-gate bipolar transistor (IGBT) module is important to increase the overall reliability of power converters for industrial applications. This article proposes a new method to measure the on-state collector?emitter voltage...... is measured in a wind power converter at a low fundamental frequency. To illustrate more, the test method as well as the performance of the measurement circuit are also presented. This measurement is also useful to indicate failure mechanisms such as bond wire lift-off and solder layer degradation...

  7. Accelerator reliability workshop

    International Nuclear Information System (INIS)

    Hardy, L.; Duru, Ph.; Koch, J.M.; Revol, J.L.; Van Vaerenbergh, P.; Volpe, A.M.; Clugnet, K.; Dely, A.; Goodhew, D.

    2002-01-01

    About 80 experts attended this workshop, which brought together all accelerator communities: accelerator driven systems, X-ray sources, medical and industrial accelerators, spallation sources projects (American and European), nuclear physics, etc. With newly proposed accelerator applications such as nuclear waste transmutation, replacement of nuclear power plants and others. Reliability has now become a number one priority for accelerator designers. Every part of an accelerator facility from cryogenic systems to data storage via RF systems are concerned by reliability. This aspect is now taken into account in the design/budget phase, especially for projects whose goal is to reach no more than 10 interruptions per year. This document gathers the slides but not the proceedings of the workshop

  8. Safety and reliability assessment

    International Nuclear Information System (INIS)

    1979-01-01

    This report contains the papers delivered at the course on safety and reliability assessment held at the CSIR Conference Centre, Scientia, Pretoria. The following topics were discussed: safety standards; licensing; biological effects of radiation; what is a PWR; safety principles in the design of a nuclear reactor; radio-release analysis; quality assurance; the staffing, organisation and training for a nuclear power plant project; event trees, fault trees and probability; Automatic Protective Systems; sources of failure-rate data; interpretation of failure data; synthesis and reliability; quantification of human error in man-machine systems; dispersion of noxious substances through the atmosphere; criticality aspects of enrichment and recovery plants; and risk and hazard analysis. Extensive examples are given as well as case studies

  9. Reliability of Circumplex Axes

    Directory of Open Access Journals (Sweden)

    Micha Strack

    2013-06-01

    Full Text Available We present a confirmatory factor analysis (CFA procedure for computing the reliability of circumplex axes. The tau-equivalent CFA variance decomposition model estimates five variance components: general factor, axes, scale-specificity, block-specificity, and item-specificity. Only the axes variance component is used for reliability estimation. We apply the model to six circumplex types and 13 instruments assessing interpersonal and motivational constructs—Interpersonal Adjective List (IAL, Interpersonal Adjective Scales (revised; IAS-R, Inventory of Interpersonal Problems (IIP, Impact Messages Inventory (IMI, Circumplex Scales of Interpersonal Values (CSIV, Support Action Scale Circumplex (SAS-C, Interaction Problems With Animals (IPI-A, Team Role Circle (TRC, Competing Values Leadership Instrument (CV-LI, Love Styles, Organizational Culture Assessment Instrument (OCAI, Customer Orientation Circle (COC, and System for Multi-Level Observation of Groups (behavioral adjectives; SYMLOG—in 17 German-speaking samples (29 subsamples, grouped by self-report, other report, and metaperception assessments. The general factor accounted for a proportion ranging from 1% to 48% of the item variance, the axes component for 2% to 30%; and scale specificity for 1% to 28%, respectively. Reliability estimates varied considerably from .13 to .92. An application of the Nunnally and Bernstein formula proposed by Markey, Markey, and Tinsley overestimated axes reliabilities in cases of large-scale specificities but otherwise works effectively. Contemporary circumplex evaluations such as Tracey’s RANDALL are sensitive to the ratio of the axes and scale-specificity components. In contrast, the proposed model isolates both components.

  10. The cost of reliability

    International Nuclear Information System (INIS)

    Ilic, M.

    1998-01-01

    In this article the restructuring process under way in the US power industry is being revisited from the point of view of transmission system provision and reliability was rolled into the average cost of electricity to all, it is not so obvious how is this cost managed in the new industry. A new MIT approach to transmission pricing is here suggested as a possible solution [it

  11. Liposomal encapsulation of a near-infrared fluorophore enhances fluorescence quenching and reliable whole body optical imaging upon activation in vivo.

    Science.gov (United States)

    Tansi, Felista L; Rüger, Ronny; Rabenhold, Markus; Steiniger, Frank; Fahr, Alfred; Kaiser, Werner A; Hilger, Ingrid

    2013-11-11

    In the past decade, there has been significant progress in the development of water soluble near-infrared fluorochromes for use in a wide range of imaging applications. Fluorochromes with high photo and thermal stability, sensitivity, adequate pharmacological properties and absorption/emission maxima within the near infrared window (650-900 nm) are highly desired for in vivo imaging, since biological tissues show very low absorption and auto-fluorescence at this spectrum window. Taking these properties into consideration, a myriad of promising near infrared fluorescent probes has been developed recently. However, a hallmark of most of these probes is a rapid clearance in vivo, which hampers their application. It is hypothesized that encapsulation of the near infrared fluorescent dye DY-676-COOH, which undergoes fluorescence quenching at high concentrations, in the aqueous interior of liposomes will result in protection and fluorescence quenching, which upon degradation by phagocytes in vivo will lead to fluorescence activation and enable imaging of inflammation. Liposomes prepared with high concentrations of DY-676-COOH reveal strong fluorescence quenching. It is demonstrated that the non-targeted PEGylated fluorescence-activatable liposomes are taken up predominantly by phagocytosis and degraded in lysosomes. Furthermore, in zymosan-induced edema models in mice, the liposomes are taken up by monocytes and macrophages which migrate to the sites of inflammation. Opposed to free DY-676-COOH, prolonged stability and retention of liposomal-DY-676-COOH is reflected in a significant increase in fluorescence intensity of edema. Thus, protected delivery and fluorescence quenching make the DY-676-COOH-loaded liposomes a highly promising contrast agent for in vivo optical imaging of inflammatory diseases. Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  12. Software reliability studies

    Science.gov (United States)

    Hoppa, Mary Ann; Wilson, Larry W.

    1994-01-01

    There are many software reliability models which try to predict future performance of software based on data generated by the debugging process. Our research has shown that by improving the quality of the data one can greatly improve the predictions. We are working on methodologies which control some of the randomness inherent in the standard data generation processes in order to improve the accuracy of predictions. Our contribution is twofold in that we describe an experimental methodology using a data structure called the debugging graph and apply this methodology to assess the robustness of existing models. The debugging graph is used to analyze the effects of various fault recovery orders on the predictive accuracy of several well-known software reliability algorithms. We found that, along a particular debugging path in the graph, the predictive performance of different models can vary greatly. Similarly, just because a model 'fits' a given path's data well does not guarantee that the model would perform well on a different path. Further we observed bug interactions and noted their potential effects on the predictive process. We saw that not only do different faults fail at different rates, but that those rates can be affected by the particular debugging stage at which the rates are evaluated. Based on our experiment, we conjecture that the accuracy of a reliability prediction is affected by the fault recovery order as well as by fault interaction.

  13. Investment in new product reliability

    International Nuclear Information System (INIS)

    Murthy, D.N.P.; Rausand, M.; Virtanen, S.

    2009-01-01

    Product reliability is of great importance to both manufacturers and customers. Building reliability into a new product is costly, but the consequences of inadequate product reliability can be costlier. This implies that manufacturers need to decide on the optimal investment in new product reliability by achieving a suitable trade-off between the two costs. This paper develops a framework and proposes an approach to help manufacturers decide on the investment in new product reliability.

  14. Validez, fiabilidad y reproducibilidad de un test incremental en rampa en personas físicamente activas. Validity and reliability of an incremental ramp test for active persons.

    Directory of Open Access Journals (Sweden)

    Benito Peinado, Pedro José

    2005-10-01

    validez alcanzada es de contenido y queda justificada por su inclusión habitual en la determinación de los umbrales en ejercicio en la bibliografía (Yamamoto y col., 1991, Ribas y col., 1994, Chicharro y col., 1995, Lucia y col., 1999.AbstractThe continuous apparition of new gas analysis equipment makes necessary and accurate calibration at the start of any new research. At the start of this study the validity of the Oxicon Pro ® analyser had already been proved (Carter et al. 1999:49, Koskolou y Geladas, 2002, Rietjens et al., 2001, but not the reproducibility of it with the protocol here proposed. With this aim test-retest trials were carried out with a group of subjects’ physically active (Sport Science students from the INEF of Madrid. Ten subjects participate (5 males and 5 females physically active (table I sows the characteristics of the subjects did two effort tests in cicloergometer. The ramp protocol increased 5 Watts every 12 seconds (25 watts•min-1, with a 3 minute worm up and lasting when the normal criteria of maximal effort were shown.The results (Table IV to VIII show the high correlation between the variables of the two tests carried out (from r=0.60 and 0.99 and a determination coefficient for VO2, VCO2 and Load of r2=0.95, 0.94 and 0.97 respectively. Only two variables showed differences between test 1 and 2, the maximal production of VCO2 and the aerobic threshold expressed in hart rate. These differences could be done to the increased load of the second test even thought no significant differences were observed on that parameter. No correlations were observed between performance variables like VO2 max, VO2/kg, Load and Load/kg and the recuperation variables.In conclusion, the studied variables support the validity of the protocol and the analyser used on our future researches.

  15. NDE reliability and advanced NDE technology validation

    International Nuclear Information System (INIS)

    Doctor, S.R.; Deffenbaugh, J.D.; Good, M.S.; Green, E.R.; Heasler, P.G.; Hutton, P.H.; Reid, L.D.; Simonen, F.A.; Spanner, J.C.; Vo, T.V.

    1989-01-01

    This paper reports on progress for three programs: (1) evaluation and improvement in nondestructive examination reliability for inservice inspection of light water reactors (LWR) (NDE Reliability Program), (2) field validation acceptance, and training for advanced NDE technology, and (3) evaluation of computer-based NDE techniques and regional support of inspection activities. The NDE Reliability Program objectives are to quantify the reliability of inservice inspection techniques for LWR primary system components through independent research and establish means for obtaining improvements in the reliability of inservice inspections. The areas of significant progress will be described concerning ASME Code activities, re-analysis of the PISC-II data, the equipment interaction matrix study, new inspection criteria, and PISC-III. The objectives of the second program are to develop field procedures for the AE and SAFT-UT techniques, perform field validation testing of these techniques, provide training in the techniques for NRC headquarters and regional staff, and work with the ASME Code for the use of these advanced technologies. The final program's objective is to evaluate the reliability and accuracy of interpretation of results from computer-based ultrasonic inservice inspection systems, and to develop guidelines for NRC staff to monitor and evaluate the effectiveness of inservice inspections conducted on nuclear power reactors. This program started in the last quarter of FY89, and the extent of the program was to prepare a work plan for presentation to and approval from a technical advisory group of NRC staff

  16. Wetland Biomass Production: emergent aquatic management options and evaluations. A final subcontract report. [Includes a bibliography containing 686 references on Typha from biological abstracts

    Energy Technology Data Exchange (ETDEWEB)

    Pratt, D.C.; Dubbe, D.R.; Garver, E.G.; Linton, P.J.

    1984-07-01

    The high yield potential and attractive chemical composition of Typha make it a particularly viable energy crop. The Minnesota research effort has demonstrated that total annual biomass yields equivalent to 30 dry tonnes/ha (13 tons/acre) are possible in planted stands. This compares with yields of total plant material between 9 and 16 dry tonnes/ha (4 to 7 tons/acre) in a typical Minnesota corn field. At least 50% of the Typha plant is comprised of a belowground rhizome system containing 40% starch and sugar. This high level of easily fermentable carbohydrate makes rhizomes an attractive feedstock for alcohol production. The aboveground portion of the plant is largely cellulose, and although it is not easily fermentable, it can be gasified or burned. This report is organized in a manner that focuses on the evaluation of the management options task. Results from stand management research performed at the University of Minnesota during 1982 and 1983 are integrated with findings from an extensive survey of relevant emergent aquatic plant research and utilization. These results and findings are then arranged in sections dealing with key steps and issues that need to be dealt with in the development of a managed emergent aquatic bio-energy system. A brief section evaluating the current status of rhizome harvesting is also included along with an indexed bibliography of the biology, ecology, and utilization of Typha which was completed with support from this SERI subcontract. 686 references, 11 figures, 17 tables.

  17. Efficiency and Throughput Advances in Continuous Roll-to-Roll a-Si Alloy PV Manufacturing Technology: Final Subcontract Report, 22 June 1998 -- 5 October 2001

    Energy Technology Data Exchange (ETDEWEB)

    Ellison, T.

    2002-04-01

    This report describes a roll-to-roll triple-junction amorphous silicon alloy PV manufacturing technology developed and commercialized by Energy Conversion Devices (ECD) and United Solar Systems. This low material cost, roll-to-roll production technology has the economies of scale needed to meet the cost goals necessary for widespread use of PV. ECD has developed and built six generations of a-Si production equipment, including the present 5 MW United Solar manufacturing plant in Troy, Michigan. ECD is now designing and building a new 25-MW facility, also in Michigan. United Solar holds the world's record for amorphous silicon PV conversion efficiency, and manufactures and markets a wide range of PV products, including flexible portable modules, power modules, and innovative building-integrated PV (BIPV) shingle and metal-roofing modules that take advantage of this lightweight, rugged, and flexible PV technology. All of United Solar's power and BIPV products are approved by Underwriters Laboratories and carry a 10-year warranty. In this PVMaT 5A subcontract, ECD and United Solar are addressing issues to reduce the cost and improve the manufacturing technology for the ECD/United Solar PV module manufacturing process. ECD and United Solar identified five technology development areas that would reduce the module manufacturing cost in the present 5-MW production facility, and also be applicable to future larger-scale manufacturing facilities.

  18. MOV reliability evaluation and periodic verification scheduling

    Energy Technology Data Exchange (ETDEWEB)

    Bunte, B.D.

    1996-12-01

    The purpose of this paper is to establish a periodic verification testing schedule based on the expected long term reliability of gate or globe motor operated valves (MOVs). The methodology in this position paper determines the nominal (best estimate) design margin for any MOV based on the best available information pertaining to the MOVs design requirements, design parameters, existing hardware design, and present setup. The uncertainty in this margin is then determined using statistical means. By comparing the nominal margin to the uncertainty, the reliability of the MOV is estimated. The methodology is appropriate for evaluating the reliability of MOVs in the GL 89-10 program. It may be used following periodic testing to evaluate and trend MOV performance and reliability. It may also be used to evaluate the impact of proposed modifications and maintenance activities such as packing adjustments. In addition, it may be used to assess the impact of new information of a generic nature which impacts safety related MOVs.

  19. MOV reliability evaluation and periodic verification scheduling

    International Nuclear Information System (INIS)

    Bunte, B.D.

    1996-01-01

    The purpose of this paper is to establish a periodic verification testing schedule based on the expected long term reliability of gate or globe motor operated valves (MOVs). The methodology in this position paper determines the nominal (best estimate) design margin for any MOV based on the best available information pertaining to the MOVs design requirements, design parameters, existing hardware design, and present setup. The uncertainty in this margin is then determined using statistical means. By comparing the nominal margin to the uncertainty, the reliability of the MOV is estimated. The methodology is appropriate for evaluating the reliability of MOVs in the GL 89-10 program. It may be used following periodic testing to evaluate and trend MOV performance and reliability. It may also be used to evaluate the impact of proposed modifications and maintenance activities such as packing adjustments. In addition, it may be used to assess the impact of new information of a generic nature which impacts safety related MOVs

  20. The reliability of commonly used electrophysiology measures.

    Science.gov (United States)

    Brown, K E; Lohse, K R; Mayer, I M S; Strigaro, G; Desikan, M; Casula, E P; Meunier, S; Popa, T; Lamy, J-C; Odish, O; Leavitt, B R; Durr, A; Roos, R A C; Tabrizi, S J; Rothwell, J C; Boyd, L A; Orth, M

    Electrophysiological measures can help understand brain function both in healthy individuals and in the context of a disease. Given the amount of information that can be extracted from these measures and their frequent use, it is essential to know more about their inherent reliability. To understand the reliability of electrophysiology measures in healthy individuals. We hypothesized that measures of threshold and latency would be the most reliable and least susceptible to methodological differences between study sites. Somatosensory evoked potentials from 112 control participants; long-latency reflexes, transcranial magnetic stimulation with resting and active motor thresholds, motor evoked potential latencies, input/output curves, and short-latency sensory afferent inhibition and facilitation from 84 controls were collected at 3 visits over 24 months at 4 Track-On HD study sites. Reliability was assessed using intra-class correlation coefficients for absolute agreement, and the effects of reliability on statistical power are demonstrated for different sample sizes and study designs. Measures quantifying latencies, thresholds, and evoked responses at high stimulator intensities had the highest reliability, and required the smallest sample sizes to adequately power a study. Very few between-site differences were detected. Reliability and susceptibility to between-site differences should be evaluated for electrophysiological measures before including them in study designs. Levels of reliability vary substantially across electrophysiological measures, though there are few between-site differences. To address this, reliability should be used in conjunction with theoretical calculations to inform sample size and ensure studies are adequately powered to detect true change in measures of interest. Copyright © 2017 Elsevier Inc. All rights reserved.

  1. Nuclear performance and reliability

    International Nuclear Information System (INIS)

    Rothwell, G.

    1993-01-01

    If fewer forced outages are a sign of improved safety, nuclear power plants have become safer and more productive. There has been a significant improvement in nuclear power plant performance, due largely to a decline in the forced outage rate and a dramatic drop in the average number of forced outages per fuel cycle. If fewer forced outages are a sign of improved safety, nuclear power plants have become safer and more productive over time. To encourage further increases in performance, regulatory incentive schemes should reward reactor operators for improved reliability and safety, as well as for improved performance

  2. [How Reliable is Neuronavigation?].

    Science.gov (United States)

    Stieglitz, Lennart Henning

    2016-02-17

    Neuronavigation plays a central role in modern neurosurgery. It allows visualizing instruments and three-dimensional image data intraoperatively and supports spatial orientation. Thus it allows to reduce surgical risks and speed up complex surgical procedures. The growing availability and importance of neuronavigation makes clear how relevant it is to know about its reliability and accuracy. Different factors may influence the accuracy during the surgery unnoticed, misleading the surgeon. Besides the best possible optimization of the systems themselves, a good knowledge about its weaknesses is mandatory for every neurosurgeon.

  3. Interactive reliability assessment using an integrated reliability data bank

    International Nuclear Information System (INIS)

    Allan, R.N.; Whitehead, A.M.

    1986-01-01

    The logical structure, techniques and practical application of a computer-aided technique based on a microcomputer using floppy disc Random Access Files is described. This interactive computational technique is efficient if the reliability prediction program is coupled directly to a relevant source of data to create an integrated reliability assessment/reliability data bank system. (DG)

  4. Microprocessor hardware reliability

    Energy Technology Data Exchange (ETDEWEB)

    Wright, R I

    1982-01-01

    Microprocessor-based technology has had an impact in nearly every area of industrial electronics and many applications have important safety implications. Microprocessors are being used for the monitoring and control of hazardous processes in the chemical, oil and power generation industries, for the control and instrumentation of aircraft and other transport systems and for the control of industrial machinery. Even in the field of nuclear reactor protection, where designers are particularly conservative, microprocessors are used to implement certain safety functions and may play increasingly important roles in protection systems in the future. Where microprocessors are simply replacing conventional hard-wired control and instrumentation systems no new hazards are created by their use. In the field of robotics, however, the microprocessor has opened up a totally new technology and with it has created possible new and as yet unknown hazards. The paper discusses some of the design and manufacturing techniques which may be used to enhance the reliability of microprocessor based systems and examines the available reliability data on lsi/vlsi microcircuits. 12 references.

  5. OSS reliability measurement and assessment

    CERN Document Server

    Yamada, Shigeru

    2016-01-01

    This book analyses quantitative open source software (OSS) reliability assessment and its applications, focusing on three major topic areas: the Fundamentals of OSS Quality/Reliability Measurement and Assessment; the Practical Applications of OSS Reliability Modelling; and Recent Developments in OSS Reliability Modelling. Offering an ideal reference guide for graduate students and researchers in reliability for open source software (OSS) and modelling, the book introduces several methods of reliability assessment for OSS including component-oriented reliability analysis based on analytic hierarchy process (AHP), analytic network process (ANP), and non-homogeneous Poisson process (NHPP) models, the stochastic differential equation models and hazard rate models. These measurement and management technologies are essential to producing and maintaining quality/reliable systems using OSS.

  6. Transit ridership, reliability, and retention.

    Science.gov (United States)

    2008-10-01

    This project explores two major components that affect transit ridership: travel time reliability and rider : retention. It has been recognized that transit travel time reliability may have a significant impact on : attractiveness of transit to many ...

  7. Travel reliability inventory for Chicago.

    Science.gov (United States)

    2013-04-01

    The overarching goal of this research project is to enable state DOTs to document and monitor the reliability performance : of their highway networks. To this end, a computer tool, TRIC, was developed to produce travel reliability inventories from : ...

  8. Weibull distribution in reliability data analysis in nuclear power plant

    International Nuclear Information System (INIS)

    Ma Yingfei; Zhang Zhijian; Zhang Min; Zheng Gangyang

    2015-01-01

    Reliability is an important issue affecting each stage of the life cycle ranging from birth to death of a product or a system. The reliability engineering includes the equipment failure data processing, quantitative assessment of system reliability and maintenance, etc. Reliability data refers to the variety of data that describe the reliability of system or component during its operation. These data may be in the form of numbers, graphics, symbols, texts and curves. Quantitative reliability assessment is the task of the reliability data analysis. It provides the information related to preventing, detect, and correct the defects of the reliability design. Reliability data analysis under proceed with the various stages of product life cycle and reliability activities. Reliability data of Systems Structures and Components (SSCs) in Nuclear Power Plants is the key factor of probabilistic safety assessment (PSA); reliability centered maintenance and life cycle management. The Weibull distribution is widely used in reliability engineering, failure analysis, industrial engineering to represent manufacturing and delivery times. It is commonly used to model time to fail, time to repair and material strength. In this paper, an improved Weibull distribution is introduced to analyze the reliability data of the SSCs in Nuclear Power Plants. An example is given in the paper to present the result of the new method. The Weibull distribution of mechanical equipment for reliability data fitting ability is very strong in nuclear power plant. It's a widely used mathematical model for reliability analysis. The current commonly used methods are two-parameter and three-parameter Weibull distribution. Through comparison and analysis, the three-parameter Weibull distribution fits the data better. It can reflect the reliability characteristics of the equipment and it is more realistic to the actual situation. (author)

  9. 2017 NREL Photovoltaic Reliability Workshop

    Energy Technology Data Exchange (ETDEWEB)

    Kurtz, Sarah [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

    2017-08-15

    NREL's Photovoltaic (PV) Reliability Workshop (PVRW) brings together PV reliability experts to share information, leading to the improvement of PV module reliability. Such improvement reduces the cost of solar electricity and promotes investor confidence in the technology -- both critical goals for moving PV technologies deeper into the electricity marketplace.

  10. AECL's reliability and maintainability program

    International Nuclear Information System (INIS)

    Wolfe, W.A.; Nieuwhof, G.W.E.

    1976-05-01

    AECL's reliability and maintainability program for nuclear generating stations is described. How the various resources of the company are organized to design and construct stations that operate reliably and safely is shown. Reliability and maintainability includes not only special mathematically oriented techniques, but also the technical skills and organizational abilities of the company. (author)

  11. Business of reliability

    Science.gov (United States)

    Engel, Pierre

    1999-12-01

    The presentation is organized around three themes: (1) The decrease of reception equipment costs allows non-Remote Sensing organization to access a technology until recently reserved to scientific elite. What this means is the rise of 'operational' executive agencies considering space-based technology and operations as a viable input to their daily tasks. This is possible thanks to totally dedicated ground receiving entities focusing on one application for themselves, rather than serving a vast community of users. (2) The multiplication of earth observation platforms will form the base for reliable technical and financial solutions. One obstacle to the growth of the earth observation industry is the variety of policies (commercial versus non-commercial) ruling the distribution of the data and value-added products. In particular, the high volume of data sales required for the return on investment does conflict with traditional low-volume data use for most applications. Constant access to data sources supposes monitoring needs as well as technical proficiency. (3) Large volume use of data coupled with low- cost equipment costs is only possible when the technology has proven reliable, in terms of application results, financial risks and data supply. Each of these factors is reviewed. The expectation is that international cooperation between agencies and private ventures will pave the way for future business models. As an illustration, the presentation proposes to use some recent non-traditional monitoring applications, that may lead to significant use of earth observation data, value added products and services: flood monitoring, ship detection, marine oil pollution deterrent systems and rice acreage monitoring.

  12. Nuclear power plant reliability database management

    International Nuclear Information System (INIS)

    Meslin, Th.; Aufort, P.

    1996-04-01

    In the framework of the development of a probabilistic safety project on site (notion of living PSA), Saint Laurent des Eaux NPP implements a specific EDF reliability database. The main goals of this project at Saint Laurent des Eaux are: to expand risk analysis and to constitute an effective local basis of thinking about operating safety by requiring the participation of all departments of a power plant: analysis of all potential operating transients, unavailability consequences... that means to go further than a simple culture of applying operating rules; to involve nuclear power plant operators in experience feedback and its analysis, especially by following up behaviour of components and of safety functions; to allow plant safety managers to outline their decisions facing safety authorities for notwithstanding, preventive maintenance programme, operating incident evaluation. To hit these goals requires feedback data, tools, techniques and development of skills. The first step is to obtain specific reliability data on the site. Raw data come from plant maintenance management system which processes all maintenance activities and keeps in memory all the records of component failures and maintenance activities. Plant specific reliability data are estimated with a Bayesian model which combines these validated raw data with corporate generic data. This approach allow to provide reliability data for main components modelled in PSA, to check the consistency of the maintenance program (RCM), to verify hypothesis made at the design about component reliability. A number of studies, related to components reliability as well as decision making process of specific incident risk evaluation have been carried out. This paper provides also an overview of the process management set up on site from raw database to specific reliability database in compliance with established corporate objectives. (authors). 4 figs

  13. Nuclear power plant reliability database management

    Energy Technology Data Exchange (ETDEWEB)

    Meslin, Th [Electricite de France (EDF), 41 - Saint-Laurent-des-Eaux (France); Aufort, P

    1996-04-01

    In the framework of the development of a probabilistic safety project on site (notion of living PSA), Saint Laurent des Eaux NPP implements a specific EDF reliability database. The main goals of this project at Saint Laurent des Eaux are: to expand risk analysis and to constitute an effective local basis of thinking about operating safety by requiring the participation of all departments of a power plant: analysis of all potential operating transients, unavailability consequences... that means to go further than a simple culture of applying operating rules; to involve nuclear power plant operators in experience feedback and its analysis, especially by following up behaviour of components and of safety functions; to allow plant safety managers to outline their decisions facing safety authorities for notwithstanding, preventive maintenance programme, operating incident evaluation. To hit these goals requires feedback data, tools, techniques and development of skills. The first step is to obtain specific reliability data on the site. Raw data come from plant maintenance management system which processes all maintenance activities and keeps in memory all the records of component failures and maintenance activities. Plant specific reliability data are estimated with a Bayesian model which combines these validated raw data with corporate generic data. This approach allow to provide reliability data for main components modelled in PSA, to check the consistency of the maintenance program (RCM), to verify hypothesis made at the design about component reliability. A number of studies, related to components reliability as well as decision making process of specific incident risk evaluation have been carried out. This paper provides also an overview of the process management set up on site from raw database to specific reliability database in compliance with established corporate objectives. (authors). 4 figs.

  14. From reliability problems to nuclear safety problems

    International Nuclear Information System (INIS)

    Yastrebenetskij, M.A.

    2003-01-01

    The article is devoted to the 10-th anniversary of Kharkov Department (KhD) of SSTC NRS and reviews its creation prehistory (works on reliability of process automated control system carried out earlier by KhD scientists), basic results of KhD activities, and its future trends

  15. Electronics reliability calculation and design

    CERN Document Server

    Dummer, Geoffrey W A; Hiller, N

    1966-01-01

    Electronics Reliability-Calculation and Design provides an introduction to the fundamental concepts of reliability. The increasing complexity of electronic equipment has made problems in designing and manufacturing a reliable product more and more difficult. Specific techniques have been developed that enable designers to integrate reliability into their products, and reliability has become a science in its own right. The book begins with a discussion of basic mathematical and statistical concepts, including arithmetic mean, frequency distribution, median and mode, scatter or dispersion of mea

  16. Development of an In-Line Minority-Carrier Lifetime Monitoring Tool for Process Control during Fabrication of Crystalline Silicon Solar Cells: Annual Subcontract Report, June 2003 (Revised)

    Energy Technology Data Exchange (ETDEWEB)

    Sinton, R. A.

    2004-04-01

    Under the PV Manufacturing R&D subcontract''Development of an In-Line, Minority-Carrier Lifetime Monitoring Tool for Process Control during Fabrication of Crystalline Silicon Solar Cells'', Sinton Consulting developed prototypes for several new instruments for use in the manufacture of silicon solar cells. These instruments are based on two families of R&D instruments that were previously available, an illumination vs. open-circuit-voltage technique and the quasi-steady state RF photoconductance technique for measuring minority-carrier lifetime. Compared to the previous instruments, the new prototypes are about 20 times faster per measurement, and have automated data analysis that does not require user intervention even when confronted by challenging cases. For example, un-passivated multi-crystalline wafers with large variations in lifetime and trapping behavior can be measured sequentially without error. Five instruments have been prototyped in this project to date, including a block tester for evaluating cast or HEM silicon blocks, a CZ ingot tester, an FZ boule tester for use with long-lifetime silicon, and an in-line sample head for measuring wafers. The CZ ingot tester and the FZ boule tester are already being used within industry and there is interest in the other prototypes. For each instrument, substantial R&D work was required in developing the device physics and analysis as well as for the hardware. This work has been documented in a series of application notes and conference publications, and will result in significant improvements for both the R&D and the industrial types of instruments.

  17. Continuous roll-to-roll a-Si photovoltaic manufacturing technology. Final subcontract report, 1 April 1992--30 September 1995

    Energy Technology Data Exchange (ETDEWEB)

    Izu, M. [Energy Conversion Devices, Inc., Troy, MI (US)

    1996-02-01

    ECD has made important progress in the development of materials, device designs, and manufacturing processes required for the continued advancement of practical photovoltaic technology{sub 1-23}. ECD has pioneered and continues further development of two key proprietary technologies, with significant potential for achieving the cost goals necessary for widespread growth of the photovoltaic market: (1) a low cost, roll-to- roll continuous substrate thin-film solar cell manufacturing process; (2) a high efficiency, monolithic, multiple-junction, spectrum- splitting thin-film amorphous silicon alloy device structure. Commercial production of multiple-junction a-Si alloy modules has been underway at ECD and its joint venture company for a number of years using ECD's proprietary roll-to-roll process and numerous advantages of this technology have been demonstrated. These include relatively low semiconductor material cost, relatively low process cost, a light-weight, rugged and flexible substrate that results in lowered installed costs of PV systems, and environmentally safe materials. Nevertheless, the manufacturing cost per watt of PV modules from our current plant remains high. In order to achieve high stable efficiency and low manufacturing cost, ECD has, at ECD's expense, engineered and constructed a 2 MW production line and a 200 kW pilot line, incorporating earlier ECD research advances in device efficiency through the use of multi-junction spectrum-splitting and high performance back-reflector cell design. Under this subcontract six tasks were directed towards achieving this goal. They are: Task I: Optimization of back-reflector system; Task II: Optimization of the Si-Ge narrow bandgap solar cells; Task III: Optimization of the stable efficiency of photovoltaic modules; Task IV: Demonstration of serpentine web continuous roll-to-roll deposition technology; Task V: Material cost reductions; and Task VI: Improving the module assembly process.

  18. Prediction of software operational reliability using testing environment factor

    International Nuclear Information System (INIS)

    Jung, Hoan Sung

    1995-02-01

    Software reliability is especially important to customers these days. The need to quantify software reliability of safety-critical systems has been received very special attention and the reliability is rated as one of software's most important attributes. Since the software is an intellectual product of human activity and since it is logically complex, the failures are inevitable. No standard models have been established to prove the correctness and to estimate the reliability of software systems by analysis and/or testing. For many years, many researches have focused on the quantification of software reliability and there are many models developed to quantify software reliability. Most software reliability models estimate the reliability with the failure data collected during the test assuming that the test environments well represent the operation profile. User's interest is on the operational reliability rather than on the test reliability, however. The experiences show that the operational reliability is higher than the test reliability. With the assumption that the difference in reliability results from the change of environment, testing environment factor comprising the aging factor and the coverage factor are defined in this work to predict the ultimate operational reliability with the failure data. It is by incorporating test environments applied beyond the operational profile into testing environment factor Test reliability can also be estimated with this approach without any model change. The application results are close to the actual data. The approach used in this thesis is expected to be applicable to ultra high reliable software systems that are used in nuclear power plants, airplanes, and other safety-critical applications

  19. Of plants and reliability

    International Nuclear Information System (INIS)

    Schneider Horst

    2009-01-01

    Behind the political statements made about the transformer event at the Kruemmel nuclear power station (KKK) in the summer of 2009 there are fundamental issues of atomic law. Pursuant to Articles 20 and 28 of its Basic Law, Germany is a state in which the rule of law applies. Consequently, the aspects of atomic law associated with the incident merit a closer look, all the more so as the items concerned have been known for many years. Important aspects in the debate about the Kruemmel nuclear power plant are the fact that the transformer is considered part of the nuclear power station under atomic law and thus a ''plant'' subject to surveillance by the nuclear regulatory agencies, on the one hand, and the reliability under atomic law of the operator and the executive personnel responsible, on the other hand. Both ''plant'' and ''reliability'' are terms focusing on nuclear safety. Hence the question to what extent safety was affected in the Kruemmel incident. The classification of the event as 0 = no or only a very slight safety impact on the INES scale (INES = International Nuclear Event Scale) should not be used to put aside the safety issue once and for all. Points of fact and their technical significance must be considered prior to any legal assessment. Legal assessments and regulations are associated with facts and circumstances. Any legal examination is based on the facts as determined and elucidated. Any other procedure would be tantamount to an inadmissible legal advance conviction. Now, what is the position of political statements, i.e. political assessments and political responsibility? If everything is done the correct way, they come at the end, after exploration of the facts and evaluation under applicable law. Sometimes things are handled differently, with consequences which are not very helpful. In the light of the provisions about the rule of law as laid down in the Basic Law, the new federal government should be made to observe the proper sequence of

  20. Mechanical reliability analysis of tubes intended for hydrocarbons

    Energy Technology Data Exchange (ETDEWEB)

    Nahal, Mourad; Khelif, Rabia [Badji Mokhtar University, Annaba (Algeria)

    2013-02-15

    Reliability analysis constitutes an essential phase in any study concerning reliability. Many industrialists evaluate and improve the reliability of their products during the development cycle - from design to startup (design, manufacture, and exploitation) - to develop their knowledge on cost/reliability ratio and to control sources of failure. In this study, we obtain results for hardness, tensile, and hydrostatic tests carried out on steel tubes for transporting hydrocarbons followed by statistical analysis. Results obtained allow us to conduct a reliability study based on resistance request. Thus, index of reliability is calculated and the importance of the variables related to the tube is presented. Reliability-based assessment of residual stress effects is applied to underground pipelines under a roadway, with and without active corrosion. Residual stress has been found to greatly increase probability of failure, especially in the early stages of pipe lifetime.

  1. Multinomial-exponential reliability function: a software reliability model

    International Nuclear Information System (INIS)

    Saiz de Bustamante, Amalio; Saiz de Bustamante, Barbara

    2003-01-01

    The multinomial-exponential reliability function (MERF) was developed during a detailed study of the software failure/correction processes. Later on MERF was approximated by a much simpler exponential reliability function (EARF), which keeps most of MERF mathematical properties, so the two functions together makes up a single reliability model. The reliability model MERF/EARF considers the software failure process as a non-homogeneous Poisson process (NHPP), and the repair (correction) process, a multinomial distribution. The model supposes that both processes are statistically independent. The paper discusses the model's theoretical basis, its mathematical properties and its application to software reliability. Nevertheless it is foreseen model applications to inspection and maintenance of physical systems. The paper includes a complete numerical example of the model application to a software reliability analysis

  2. Quality assurance and reliability

    International Nuclear Information System (INIS)

    Normand, J.; Charon, M.

    1975-01-01

    Concern for obtaining high-quality products which will function properly when required to do so is nothing new - it is one manifestation of a conscientious attitude to work. However, the complexity and cost of equipment and the consequences of even temporary immobilization are such that it has become necessary to make special arrangements for obtaining high-quality products and examining what one has obtained. Each unit within an enterprise must examine its own work or arrange for it to be examined; a unit whose specific task is quality assurance is responsible for overall checking, but does not relieve other units of their responsibility. Quality assurance is a form of mutual assistance within an enterprise, designed to remove the causes of faults as far as possible. It begins very early in a project and continues through the ordering stage, construction, start-up trials and operation. Quality and hence reliability are the direct result of what is done at all stages of a project. They depend on constant attention to detail, for even a minor piece of poor workmanship can, in the case of an essential item of equipment, give rise to serious operational difficulties

  3. Reliability of Oronasal Fistula Classification.

    Science.gov (United States)

    Sitzman, Thomas J; Allori, Alexander C; Matic, Damir B; Beals, Stephen P; Fisher, David M; Samson, Thomas D; Marcus, Jeffrey R; Tse, Raymond W

    2018-01-01

    Objective Oronasal fistula is an important complication of cleft palate repair that is frequently used to evaluate surgical quality, yet reliability of fistula classification has never been examined. The objective of this study was to determine the reliability of oronasal fistula classification both within individual surgeons and between multiple surgeons. Design Using intraoral photographs of children with repaired cleft palate, surgeons rated the location of palatal fistulae using the Pittsburgh Fistula Classification System. Intrarater and interrater reliability scores were calculated for each region of the palate. Participants Eight cleft surgeons rated photographs obtained from 29 children. Results Within individual surgeons reliability for each region of the Pittsburgh classification ranged from moderate to almost perfect (κ = .60-.96). By contrast, reliability between surgeons was lower, ranging from fair to substantial (κ = .23-.70). Between-surgeon reliability was lowest for the junction of the soft and hard palates (κ = .23). Within-surgeon and between-surgeon reliability were almost perfect for the more general classification of fistula in the secondary palate (κ = .95 and κ = .83, respectively). Conclusions This is the first reliability study of fistula classification. We show that the Pittsburgh Fistula Classification System is reliable when used by an individual surgeon, but less reliable when used among multiple surgeons. Comparisons of fistula occurrence among surgeons may be subject to less bias if they use the more general classification of "presence or absence of fistula of the secondary palate" rather than the Pittsburgh Fistula Classification System.

  4. Dependent systems reliability estimation by structural reliability approach

    DEFF Research Database (Denmark)

    Kostandyan, Erik; Sørensen, John Dalsgaard

    2014-01-01

    Estimation of system reliability by classical system reliability methods generally assumes that the components are statistically independent, thus limiting its applicability in many practical situations. A method is proposed for estimation of the system reliability with dependent components, where...... the leading failure mechanism(s) is described by physics of failure model(s). The proposed method is based on structural reliability techniques and accounts for both statistical and failure effect correlations. It is assumed that failure of any component is due to increasing damage (fatigue phenomena...... identification. Application of the proposed method can be found in many real world systems....

  5. Reliability of reactor materials

    International Nuclear Information System (INIS)

    Toerroenen, K.; Aho-Mantila, I.

    1986-05-01

    This report is the final technical report of the fracture mechanics part of the Reliability of Reactor Materials Programme, which was carried out at the Technical Research Centre of Finland (VTT) through the years 1981 to 1983. Research and development work was carried out in five major areas, viz. statistical treatment and modelling of cleavage fracture, crack arrest, ductile fracture, instrumented impact testing as well as comparison of numerical and experimental elastic-plastic fracture mechanics. In the area of cleavage fracture the critical variables affecting the fracture of steels are considered in the frames of a statistical model, so called WST-model. Comparison of fracture toughness values predicted by the model and corresponding experimental values shows excellent agreement for a variety of microstructures. different posibilities for using the model are discussed. The development work in the area of crack arrest testing was concentrated in the crack starter properties, test arrangement and computer control. A computerized elastic-plastic fracture testing method with a variety of test specimen geometries in a large temperature range was developed for a routine stage. Ductile fracture characteristics of reactor pressure vessel steel A533B and comparable weld material are given. The features of a new, patented instrumented impact tester are described. Experimental and theoretical comparisons between the new and conventional testers indicated clearly the improvements achieved with the new tester. A comparison of numerical and experimental elastic-plastic fracture mechanics capabilities at VTT was carried out. The comparison consisted of two-dimensional linear elastic as well as elastic-plastic finite element analysis of four specimen geometries and equivalent experimental tests. (author)

  6. Field reliability of electronic systems

    International Nuclear Information System (INIS)

    Elm, T.

    1984-02-01

    This report investigates, through several examples from the field, the reliability of electronic units in a broader sense. That is, it treats not just random parts failure, but also inadequate reliability design and (externally and internally) induced failures. The report is not meant to be merely an indication of the state of the art for the reliability prediction methods we know, but also as a contribution to the investigation of man-machine interplay in the operation and repair of electronic equipment. The report firmly links electronics reliability to safety and risk analyses approaches with a broader, system oriented view of reliability prediction and with postfailure stress analysis. It is intended to reveal, in a qualitative manner, the existence of symptom and cause patterns. It provides a background for further investigations to identify the detailed mechanisms of the faults and the remedical actions and precautions for achieving cost effective reliability. (author)

  7. Reliability Assessment Of Wind Turbines

    DEFF Research Database (Denmark)

    Sørensen, John Dalsgaard

    2014-01-01

    Reduction of cost of energy for wind turbines are very important in order to make wind energy competitive compared to other energy sources. Therefore the turbine components should be designed to have sufficient reliability but also not be too costly (and safe). This paper presents models...... for uncertainty modeling and reliability assessment of especially the structural components such as tower, blades, substructure and foundation. But since the function of a wind turbine is highly dependent on many electrical and mechanical components as well as a control system also reliability aspects...... of these components are discussed and it is described how there reliability influences the reliability of the structural components. Two illustrative examples are presented considering uncertainty modeling, reliability assessment and calibration of partial safety factors for structural wind turbine components exposed...

  8. Reliability engineering theory and practice

    CERN Document Server

    Birolini, Alessandro

    2014-01-01

    This book shows how to build in, evaluate, and demonstrate reliability and availability of components, equipment, systems. It presents the state-of-theart of reliability engineering, both in theory and practice, and is based on the author's more than 30 years experience in this field, half in industry and half as Professor of Reliability Engineering at the ETH, Zurich. The structure of the book allows rapid access to practical results. This final edition extend and replace all previous editions. New are, in particular, a strategy to mitigate incomplete coverage, a comprehensive introduction to human reliability with design guidelines and new models, and a refinement of reliability allocation, design guidelines for maintainability, and concepts related to regenerative stochastic processes. The set of problems for homework has been extended. Methods & tools are given in a way that they can be tailored to cover different reliability requirement levels and be used for safety analysis. Because of the Appendice...

  9. Reliability of Wireless Sensor Networks

    Science.gov (United States)

    Dâmaso, Antônio; Rosa, Nelson; Maciel, Paulo

    2014-01-01

    Wireless Sensor Networks (WSNs) consist of hundreds or thousands of sensor nodes with limited processing, storage, and battery capabilities. There are several strategies to reduce the power consumption of WSN nodes (by increasing the network lifetime) and increase the reliability of the network (by improving the WSN Quality of Service). However, there is an inherent conflict between power consumption and reliability: an increase in reliability usually leads to an increase in power consumption. For example, routing algorithms can send the same packet though different paths (multipath strategy), which it is important for reliability, but they significantly increase the WSN power consumption. In this context, this paper proposes a model for evaluating the reliability of WSNs considering the battery level as a key factor. Moreover, this model is based on routing algorithms used by WSNs. In order to evaluate the proposed models, three scenarios were considered to show the impact of the power consumption on the reliability of WSNs. PMID:25157553

  10. The value of service reliability

    OpenAIRE

    Benezech , Vincent; Coulombel , Nicolas

    2013-01-01

    International audience; This paper studies the impact of service frequency and reliability on the choice of departure time and the travel cost of transit users. When the user has (α, β, γ) scheduling preferences, we show that the optimal head start decreases with service reliability, as expected. It does not necessarily decrease with service frequency, however. We derive the value of service headway (VoSH) and the value of service reliability (VoSR), which measure the marginal effect on the e...

  11. Distribution-Independent Reliable Learning

    OpenAIRE

    Kanade, Varun; Thaler, Justin

    2014-01-01

    We study several questions in the reliable agnostic learning framework of Kalai et al. (2009), which captures learning tasks in which one type of error is costlier than others. A positive reliable classifier is one that makes no false positive errors. The goal in the positive reliable agnostic framework is to output a hypothesis with the following properties: (i) its false positive error rate is at most $\\epsilon$, (ii) its false negative error rate is at most $\\epsilon$ more than that of the...

  12. RTE - 2015 Reliability Report. Summary

    International Nuclear Information System (INIS)

    2016-01-01

    Every year, RTE produces a reliability report for the past year. This report includes a number of results from previous years so that year-to-year comparisons can be drawn and long-term trends analysed. The 2015 report underlines the major factors that have impacted on the reliability of the electrical power system, without focusing exclusively on Significant System Events (ESS). It describes various factors which contribute to present and future reliability and the numerous actions implemented by RTE to ensure reliability today and in the future, as well as the ways in which the various parties involved in the electrical power system interact across the whole European interconnected network

  13. Assessing software quality at each step of its life-cycle to enhance reliability of control systems

    International Nuclear Information System (INIS)

    Hardion, V.; Buteau, A.; Leclercq, N.; Abeille, G.; Pierre-Joseph, Z.; Le, S.

    2012-01-01

    A distributed software control system aims to enhance the upgrade ability and reliability by sharing responsibility between several components. The disadvantage is that it makes it harder to detect problems on a significant number of modules. With Kaizen in mind we have chosen to continuously invest in automation to obtain a complete overview of software quality despite the growth of legacy code. The development process has already been mastered by staging each life-cycle step thanks to a continuous integration server based on JENKINS and MAVEN. We enhanced this process, focusing on 3 objectives: Automatic Test, Static Code Analysis and Post-Mortem Supervision. Now, the build process automatically includes a test section to detect regressions, incorrect behaviour and integration incompatibility. The in-house TANGOUNIT project satisfies the difficulties of testing distributed components such as Tango Devices. In the next step, the programming code has to pass a complete code quality check-up. The SONAR quality server has been integrated in the process, to collect each static code analysis and display the hot topics on summary web pages. Finally, the integration of Google BREAKPAD in every TANGO Devices gives us essential statistics from crash reports and enables us to replay the crash scenarios at any time. We have already gained greater visibility on current developments. Some concrete results will be presented including reliability enhancement, better management of subcontracted software development, quicker adoption of coding standards by new developers and understanding of impacts when moving to a new technology. (authors)

  14. Full scale experimental assessment of reliability of steady state design criteria of activated sludge process with biological nitrogen removal and chemical phosphorus removal; Verifica sperimentale a scala reale di criteri di dimensionamento dei sistemi a fanghi attivi per la rimozione dei nutrienti

    Energy Technology Data Exchange (ETDEWEB)

    Tatano, F. [Politecnico di Milano, Milan (Italy). Dip. di Ingegneria Idraulica, Ambientale e del Rilevamento, Sez. Ambientale

    1996-06-01

    The biological phase of a wastewater treatment plant situated in the Ruhr River Region (Germany), has been monitored for about one year. The collected experimental data have been elaborated in this paper with the objective of an assessment of the reliability of some recent steady-state design criteria of the activated sludge process with biological nitrogen removal and chemical phosphorus removal.

  15. A quantitative calculation for software reliability evaluation

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Young-Jun; Lee, Jang-Soo [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2016-10-15

    To meet these regulatory requirements, the software used in the nuclear safety field has been ensured through the development, validation, safety analysis, and quality assurance activities throughout the entire process life cycle from the planning phase to the installation phase. A variety of activities, such as the quality assurance activities are also required to improve the quality of a software. However, there are limitations to ensure that the quality is improved enough. Therefore, the effort to calculate the reliability of the software continues for a quantitative evaluation instead of a qualitative evaluation. In this paper, we propose a quantitative calculation method for the software to be used for a specific operation of the digital controller in an NPP. After injecting random faults in the internal space of a developed controller and calculating the ability to detect the injected faults using diagnostic software, we can evaluate the software reliability of a digital controller in an NPP. We tried to calculate the software reliability of the controller in an NPP using a new method that differs from a traditional method. It calculates the fault detection coverage after injecting the faults into the software memory space rather than the activity through the life cycle process. We attempt differentiation by creating a new definition of the fault, imitating the software fault using the hardware, and giving a consideration and weights for injection faults.

  16. Seeking high reliability in primary care: Leadership, tools, and organization.

    Science.gov (United States)

    Weaver, Robert R

    2015-01-01

    Leaders in health care increasingly recognize that improving health care quality and safety requires developing an organizational culture that fosters high reliability and continuous process improvement. For various reasons, a reliability-seeking culture is lacking in most health care settings. Developing a reliability-seeking culture requires leaders' sustained commitment to reliability principles using key mechanisms to embed those principles widely in the organization. The aim of this study was to examine how key mechanisms used by a primary care practice (PCP) might foster a reliability-seeking, system-oriented organizational culture. A case study approach was used to investigate the PCP's reliability culture. The study examined four cultural artifacts used to embed reliability-seeking principles across the organization: leadership statements, decision support tools, and two organizational processes. To decipher their effects on reliability, the study relied on observations of work patterns and the tools' use, interactions during morning huddles and process improvement meetings, interviews with clinical and office staff, and a "collective mindfulness" questionnaire. The five reliability principles framed the data analysis. Leadership statements articulated principles that oriented the PCP toward a reliability-seeking culture of care. Reliability principles became embedded in the everyday discourse and actions through the use of "problem knowledge coupler" decision support tools and daily "huddles." Practitioners and staff were encouraged to report unexpected events or close calls that arose and which often initiated a formal "process change" used to adjust routines and prevent adverse events from recurring. Activities that foster reliable patient care became part of the taken-for-granted routine at the PCP. The analysis illustrates the role leadership, tools, and organizational processes play in developing and embedding a reliable-seeking culture across an

  17. A BACTERIA FORAGING ALGORITHM FOR SOLVING INTEGRATED MULTI-PERIOD CELL FORMATION AND SUBCONTRACTING PRODUCTION PLANNING IN A DYNAMIC CELLULAR MANUFACTURING SYSTEM

    Directory of Open Access Journals (Sweden)

    S.H. Tang

    2012-01-01

    Full Text Available

    ENGLISH ABSTRACT: The bacteria foraging algorithm (BFA is a new computation technique inspired by the social foraging behaviour of Escherichia coli (E. coli bacteria. Since the introduction of the BFA by Kevin M. Passino, there have been many challenges in employing this algorithm to problems other than those for which the algorithm was proposed. This research aims to apply this emerging optimisation algorithm to develop a mixed-integer programming model for designing cellular manufacturing systems (CMSs, and production planning in dynamic environments. In dynamic environments, product mix and part demand vary under multi-period planning horizons. Thus the best-designed cells for one period may not be adequate for subsequent periods, requiring their reconstruction. The advantages of the proposed model are as follows: consideration of batch inter-cell and intra-cell material handling by assuming the sequence of operations, allowing for alternative process plans for part types, and consideration of machine copying, with an emphasis on the effect of trade-offs between production and outsourcing costs. The goal is to minimise the sum of the machines’ constant and variable costs, inter-cell and intra-cell material handling costs, reconstruction costs, partial subcontracting costs, and inventory carrying costs. In addition, a newly-developed BFA-based optimisation algorithm has been compared with the branch and bound algorithm. The results suggest that the proposed algorithm performs better than related works.

    AFRIKAANSE OPSOMMING: Die ‘bacteria foraging algorithm’ (BFA is ‘n berekeningstegniek gebaseeer op die sosiale soekgedrag van Escherichia coli (E. coli bakterieë. Sedert die bekendstelling van BFA was daar talle uitdagings oor toepassings van die algoritme op ander probleme as dié waarvoor dit ontwikkel is. Dié navorsing poog om deur toepassing van die algoritme ‘n gemengde heelgetalprogrammeringmodel te ontwikkel vir die

  18. Reliability in automotive ethernet networks

    DEFF Research Database (Denmark)

    Soares, Fabio L.; Campelo, Divanilson R.; Yan, Ying

    2015-01-01

    This paper provides an overview of in-vehicle communication networks and addresses the challenges of providing reliability in automotive Ethernet in particular.......This paper provides an overview of in-vehicle communication networks and addresses the challenges of providing reliability in automotive Ethernet in particular....

  19. Estimation of Bridge Reliability Distributions

    DEFF Research Database (Denmark)

    Thoft-Christensen, Palle

    In this paper it is shown how the so-called reliability distributions can be estimated using crude Monte Carlo simulation. The main purpose is to demonstrate the methodology. Therefor very exact data concerning reliability and deterioration are not needed. However, it is intended in the paper to ...

  20. Reliability of wind turbine subassemblies

    NARCIS (Netherlands)

    Spinato, F.; Tavner, P.J.; Bussel, van G.J.W.; Koutoulakos, E.

    2009-01-01

    We have investigated the reliability of more than 6000 modern onshore wind turbines and their subassemblies in Denmark and Germany over 11 years and particularly changes in reliability of generators, gearboxes and converters in a subset of 650 turbines in Schleswig Holstein, Germany. We first start

  1. Reliability engineering theory and practice

    CERN Document Server

    Birolini, Alessandro

    2010-01-01

    Presenting a solid overview of reliability engineering, this volume enables readers to build and evaluate the reliability of various components, equipment and systems. Current applications are presented, and the text itself is based on the author's 30 years of experience in the field.

  2. Reliability-Based Optimization in Structural Engineering

    DEFF Research Database (Denmark)

    Enevoldsen, I.; Sørensen, John Dalsgaard

    1994-01-01

    In this paper reliability-based optimization problems in structural engineering are formulated on the basis of the classical decision theory. Several formulations are presented: Reliability-based optimal design of structural systems with component or systems reliability constraints, reliability...

  3. Reliability-Based Code Calibration

    DEFF Research Database (Denmark)

    Faber, M.H.; Sørensen, John Dalsgaard

    2003-01-01

    The present paper addresses fundamental concepts of reliability based code calibration. First basic principles of structural reliability theory are introduced and it is shown how the results of FORM based reliability analysis may be related to partial safety factors and characteristic values....... Thereafter the code calibration problem is presented in its principal decision theoretical form and it is discussed how acceptable levels of failure probability (or target reliabilities) may be established. Furthermore suggested values for acceptable annual failure probabilities are given for ultimate...... and serviceability limit states. Finally the paper describes the Joint Committee on Structural Safety (JCSS) recommended procedure - CodeCal - for the practical implementation of reliability based code calibration of LRFD based design codes....

  4. Photovoltaic performance and reliability workshop

    Energy Technology Data Exchange (ETDEWEB)

    Mrig, L. [ed.

    1993-12-01

    This workshop was the sixth in a series of workshops sponsored by NREL/DOE under the general subject of photovoltaic testing and reliability during the period 1986--1993. PV performance and PV reliability are at least as important as PV cost, if not more. In the US, PV manufacturers, DOE laboratories, electric utilities, and others are engaged in the photovoltaic reliability research and testing. This group of researchers and others interested in the field were brought together to exchange the technical knowledge and field experience as related to current information in this evolving field of PV reliability. The papers presented here reflect this effort since the last workshop held in September, 1992. The topics covered include: cell and module characterization, module and system testing, durability and reliability, system field experience, and standards and codes.

  5. Reliability and risk analysis methods research plan

    International Nuclear Information System (INIS)

    1984-10-01

    This document presents a plan for reliability and risk analysis methods research to be performed mainly by the Reactor Risk Branch (RRB), Division of Risk Analysis and Operations (DRAO), Office of Nuclear Regulatory Research. It includes those activities of other DRAO branches which are very closely related to those of the RRB. Related or interfacing programs of other divisions, offices and organizations are merely indicated. The primary use of this document is envisioned as an NRC working document, covering about a 3-year period, to foster better coordination in reliability and risk analysis methods development between the offices of Nuclear Regulatory Research and Nuclear Reactor Regulation. It will also serve as an information source for contractors and others to more clearly understand the objectives, needs, programmatic activities and interfaces together with the overall logical structure of the program

  6. 18 CFR 39.5 - Reliability Standards.

    Science.gov (United States)

    2010-04-01

    ... 18 Conservation of Power and Water Resources 1 2010-04-01 2010-04-01 false Reliability Standards... RELIABILITY STANDARDS § 39.5 Reliability Standards. (a) The Electric Reliability Organization shall file each Reliability Standard or modification to a Reliability Standard that it proposes to be made effective under...

  7. Impact of staffing parameters on operational reliability

    International Nuclear Information System (INIS)

    Hahn, H.A.; Houghton, F.K.

    1993-01-01

    This paper reports on a project related to human resource management of the Department of Energy's (DOE's) High-Level Waste (HLW) Tank program. Safety and reliability of waste tank operations is impacted by several issues, including not only the design of the tanks themselves, but also how operations and operational personnel are managed. As demonstrated by management assessments performed by the Tiger Teams, DOE believes that the effective use of human resources impacts environment safety, and health concerns. For the of the current paper, human resource management activities are identified as ''Staffing'' and include the of developing the functional responsibilities and qualifications of technical and administrative personnel. This paper discusses the importance of staff plans and management in the overall view of safety and reliability. The work activities and procedures associated with the project, a review of the results of these activities, including a summary of the literature and a preliminary analysis of the data. We conclude that although identification of staffing issues and the development of staffing plans contributes to the overall reliability and safety of the HLW tanks, the relationship is not well understood and is in need of further development

  8. Impact of staffing parameters on operational reliability

    International Nuclear Information System (INIS)

    Hahn, H.A.; Houghton, F.K.

    1993-01-01

    This paper reports on a project related to human resource management of the Department of Energy (DOEs) High-Level Waste (HLW) Tank program. Safety and reliability of waste tank operations is impacted by several issues, including not only the design of the tanks themselves, but also how operations and operational personnel are managed. As demonstrated by management assessments performed by the Tiger Teams, DOE believes that the effective use of human resources impacts environment, safety, and health concerns. For the purposes of the current paper, human resource management activities are identified as 'Staffing' and include the process of developing the functional responsibilities and qualifications of technical and administrative personnel. This paper discusses the importance of staff plans and management in the overall view of safety and reliability, the work activities and procedures associated with the project, a review of the results of these activities, including a summary of the literature and a preliminary analysis of the data. We conclude that, although identification of staffing issues and the development of staffing plans contributes to the overall reliability and safety of the HLW tanks, the relationship is not well understood and is in need of further development

  9. North American Electric Reliability Council (NERC) Reliability Coordinators

    Data.gov (United States)

    Department of Homeland Security — ERC is an international regulatory authority that works to improve the reliability of the bulk power system in North America. NERC works with many different regional...

  10. Reliability evaluation of a natural circulation system

    International Nuclear Information System (INIS)

    Jafari, Jalil; D'Auria, Francesco; Kazeminejad, Hossein; Davilu, Hadi

    2003-01-01

    This paper discusses a reliability study performed with reference to a passive thermohydraulic natural circulation (NC) system, named TTL-1. A methodology based on probabilistic techniques has been applied with the main purpose to optimize the system design. The obtained results have been adopted to estimate the thermal-hydraulic reliability (TH-R) of the same system. A total of 29 relevant parameters (including nominal values and plausible ranges of variations) affecting the design and the NC performance of the TTL-1 loop are identified and a probability of occurrence is assigned for each value based on expert judgment. Following procedures established for the uncertainty evaluation of thermal-hydraulic system codes results, 137 system configurations have been selected and each configuration has been analyzed via the Relap5 best-estimate code. The reference system configuration and the failure criteria derived from the 'mission' of the passive system are adopted for the evaluation of the system TH-R. Four different definitions of a less-than-unity 'reliability-values' (where unity represents the maximum achievable reliability) are proposed for the performance of the selected passive system. This is normally considered fully reliable, i.e. reliability-value equal one, in typical Probabilistic Safety Assessment (PSA) applications in nuclear reactor safety. The two 'point' TH-R values for the considered NC system were found equal to 0.70 and 0.85, i.e. values comparable with the reliability of a pump installed in an 'equivalent' forced circulation (active) system having the same 'mission'. The design optimization study was completed by a regression analysis addressing the output of the 137 calculations: heat losses, undetected leakage, loop length, riser diameter, and equivalent diameter of the test section have been found as the most important parameters bringing to the optimal system design and affecting the TH-R. As added values for this work, the comparison has

  11. Calculating system reliability with SRFYDO

    Energy Technology Data Exchange (ETDEWEB)

    Morzinski, Jerome [Los Alamos National Laboratory; Anderson - Cook, Christine M [Los Alamos National Laboratory; Klamann, Richard M [Los Alamos National Laboratory

    2010-01-01

    SRFYDO is a process for estimating reliability of complex systems. Using information from all applicable sources, including full-system (flight) data, component test data, and expert (engineering) judgment, SRFYDO produces reliability estimates and predictions. It is appropriate for series systems with possibly several versions of the system which share some common components. It models reliability as a function of age and up to 2 other lifecycle (usage) covariates. Initial output from its Exploratory Data Analysis mode consists of plots and numerical summaries so that the user can check data entry and model assumptions, and help determine a final form for the system model. The System Reliability mode runs a complete reliability calculation using Bayesian methodology. This mode produces results that estimate reliability at the component, sub-system, and system level. The results include estimates of uncertainty, and can predict reliability at some not-too-distant time in the future. This paper presents an overview of the underlying statistical model for the analysis, discusses model assumptions, and demonstrates usage of SRFYDO.

  12. 78 FR 41339 - Electric Reliability Organization Proposal To Retire Requirements in Reliability Standards

    Science.gov (United States)

    2013-07-10

    ...] Electric Reliability Organization Proposal To Retire Requirements in Reliability Standards AGENCY: Federal... Reliability Standards identified by the North American Electric Reliability Corporation (NERC), the Commission-certified Electric Reliability Organization. FOR FURTHER INFORMATION CONTACT: Kevin Ryan (Legal Information...

  13. Planning is not sufficient - Reliable computers need good requirements specifications

    International Nuclear Information System (INIS)

    Matras, J.R.

    1992-01-01

    Computer system reliability is the assurance that a computer system will perform its functions when required to do so. To ensure such reliability, it is important to plan the activities needed for computer system development. These development activities, in turn, require a Computer Quality Assurance Plan (CQAP) that provides the following: a Configuration Management Plan, a Verification and Validation (V and V) Plan, documentation requirements, a defined life cycle, review requirements, and organizational responsibilities. These items are necessary for system reliability; ultimately, however, they are not enough. Development of a reliable system is dependent on the requirements specification. This paper discusses how to use existing industry standards to develop a CQAP. In particular, the paper emphasizes the importance of the requirements specification and of methods for establishing reliability goals. The paper also describes how the revision of ANSI/IEE-ANS-7-4.3.2, Application Criteria for Digital Computer Systems of Nuclear Power Generating Stations, has addressed these issues

  14. DMD reliability: a MEMS success story

    Science.gov (United States)

    Douglass, Michael

    2003-01-01

    The Digital Micromirror Device (DMD) developed by Texas Instruments (TI) has made tremendous progress in both performance and reliability since it was first invented in 1987. From the first working concept of a bistable mirror, the DMD is now providing high-brightness, high-contrast, and high-reliability in over 1,500,000 projectors using Digital Light Processing technology. In early 2000, TI introduced the first DMD chip with a smaller mirror (14-micron pitch versus 17-micron pitch). This allowed a greater number of high-resolution DMD chips per wafer, thus providing an increased output capacity as well as the flexibility to use existing package designs. By using existing package designs, subsequent DMDs cost less as well as met our customers' demand for faster time to market. In recent years, the DMD achieved the status of being a commercially successful MEMS device. It reached this status by the efforts of hundreds of individuals working toward a common goal over many years. Neither textbooks nor design guidelines existed at the time. There was little infrastructure in place to support such a large endeavor. The knowledge we gained through our characterization and testing was all we had available to us through the first few years of development. Reliability was only a goal in 1992 when production development activity started; a goal that many throughout the industry and even within Texas Instruments doubted the DMD could achieve. The results presented in this paper demonstrate that we succeeded by exceeding the reliability goals.

  15. New Approaches to Reliability Assessment

    DEFF Research Database (Denmark)

    Ma, Ke; Wang, Huai; Blaabjerg, Frede

    2016-01-01

    of energy. New approaches for reliability assessment are being taken in the design phase of power electronics systems based on the physics-of-failure in components. In this approach, many new methods, such as multidisciplinary simulation tools, strength testing of components, translation of mission profiles......, and statistical analysis, are involved to enable better prediction and design of reliability for products. This article gives an overview of the new design flow in the reliability engineering of power electronics from the system-level point of view and discusses some of the emerging needs for the technology...

  16. Some remarks on software reliability

    International Nuclear Information System (INIS)

    Gonzalez Hernando, J.; Sanchez Izquierdo, J.

    1978-01-01

    Trend in modern NPPCI is toward a broad use of programmable elements. Some aspects concerning present status of programmable digital systems reliability are reported. Basic differences between software and hardware concept require a specific approach in all the reliability topics concerning software systems. The software reliability theory was initialy developed upon hardware models analogies. At present this approach is changing and specific models are being developed. The growing use of programmable systems necessitates emphasizing the importance of more adequate regulatory requirements to include this technology in NPPCI. (author)

  17. Reliability evaluation of power systems

    CERN Document Server

    Billinton, Roy

    1996-01-01

    The Second Edition of this well-received textbook presents over a decade of new research in power system reliability-while maintaining the general concept, structure, and style of the original volume. This edition features new chapters on the growing areas of Monte Carlo simulation and reliability economics. In addition, chapters cover the latest developments in techniques and their application to real problems. The text also explores the progress occurring in the structure, planning, and operation of real power systems due to changing ownership, regulation, and access. This work serves as a companion volume to Reliability Evaluation of Engineering Systems: Second Edition (1992).

  18. Aerospace reliability applied to biomedicine.

    Science.gov (United States)

    Lalli, V. R.; Vargo, D. J.

    1972-01-01

    An analysis is presented that indicates that the reliability and quality assurance methodology selected by NASA to minimize failures in aerospace equipment can be applied directly to biomedical devices to improve hospital equipment reliability. The Space Electric Rocket Test project is used as an example of NASA application of reliability and quality assurance (R&QA) methods. By analogy a comparison is made to show how these same methods can be used in the development of transducers, instrumentation, and complex systems for use in medicine.

  19. Integrating reliability analysis and design

    International Nuclear Information System (INIS)

    Rasmuson, D.M.

    1980-10-01

    This report describes the Interactive Reliability Analysis Project and demonstrates the advantages of using computer-aided design systems (CADS) in reliability analysis. Common cause failure problems require presentations of systems, analysis of fault trees, and evaluation of solutions to these. Results have to be communicated between the reliability analyst and the system designer. Using a computer-aided design system saves time and money in the analysis of design. Computer-aided design systems lend themselves to cable routing, valve and switch lists, pipe routing, and other component studies. At EG and G Idaho, Inc., the Applicon CADS is being applied to the study of water reactor safety systems

  20. Procedures for controlling the risks of reliability, safety, and availability of technical systems

    International Nuclear Information System (INIS)

    1987-01-01

    The reference book covers four sections. Apart from the fundamental aspects of the reliability problem, of risk and safety and the relevant criteria with regard to reliability, the material presented explains reliability in terms of maintenance, logistics and availability, and presents procedures for reliability assessment and determination of factors influencing the reliability, together with suggestions for systems technical integration. The reliability assessment consists of diagnostic and prognostic analyses. The section on factors influencing reliability discusses aspects of organisational structures, programme planning and control, and critical activities. (DG) [de

  1. Reliability analysis of shutdown system

    International Nuclear Information System (INIS)

    Kumar, C. Senthil; John Arul, A.; Pal Singh, Om; Suryaprakasa Rao, K.

    2005-01-01

    This paper presents the results of reliability analysis of Shutdown System (SDS) of Indian Prototype Fast Breeder Reactor. Reliability analysis carried out using Fault Tree Analysis predicts a value of 3.5 x 10 -8 /de for failure of shutdown function in case of global faults and 4.4 x 10 -8 /de for local faults. Based on 20 de/y, the frequency of shutdown function failure is 0.7 x 10 -6 /ry, which meets the reliability target, set by the Indian Atomic Energy Regulatory Board. The reliability is limited by Common Cause Failure (CCF) of actuation part of SDS and to a lesser extent CCF of electronic components. The failure frequency of individual systems is -3 /ry, which also meets the safety criteria. Uncertainty analysis indicates a maximum error factor of 5 for the top event unavailability

  2. Measures of differences in reliability

    International Nuclear Information System (INIS)

    Doksum, K.A.

    1975-01-01

    Measures of differences in reliability of two systems are considered in the scale model, location-scale model, and a nonparametric model. In each model, estimates and confidence intervals are given and some of their properties discussed

  3. Transportation reliability and trip satisfaction.

    Science.gov (United States)

    2012-10-01

    Travel delays and associated costs have become a major problem in Michigan over the : past several decades as congestion has continued to increase, creating significant negative : impacts on travel reliability on many roadways throughout the State. T...

  4. Reliability Analysis of Wind Turbines

    DEFF Research Database (Denmark)

    Toft, Henrik Stensgaard; Sørensen, John Dalsgaard

    2008-01-01

    In order to minimise the total expected life-cycle costs of a wind turbine it is important to estimate the reliability level for all components in the wind turbine. This paper deals with reliability analysis for the tower and blades of onshore wind turbines placed in a wind farm. The limit states...... consideres are in the ultimate limit state (ULS) extreme conditions in the standstill position and extreme conditions during operating. For wind turbines, where the magnitude of the loads is influenced by the control system, the ultimate limit state can occur in both cases. In the fatigue limit state (FLS......) the reliability level for a wind turbine placed in a wind farm is considered, and wake effects from neighbouring wind turbines is taken into account. An illustrative example with calculation of the reliability for mudline bending of the tower is considered. In the example the design is determined according...

  5. Reliability issues at the LHC

    CERN Multimedia

    CERN. Geneva. Audiovisual Unit; Gillies, James D

    2002-01-01

    The Lectures on reliability issues at the LHC will be focused on five main Modules on five days. Module 1: Basic Elements in Reliability Engineering Some basic terms, definitions and methods, from components up to the system and the plant, common cause failures and human factor issues. Module 2: Interrelations of Reliability & Safety (R&S) Reliability and risk informed approach, living models, risk monitoring. Module 3: The ideal R&S Process for Large Scale Systems From R&S goals via the implementation into the system to the proof of the compliance. Module 4: Some Applications of R&S on LHC Master logic, anatomy of risk, cause - consequence diagram, decomposition and aggregation of the system. Module 5: Lessons learned from R&S Application in various Technologies Success stories, pitfalls, constrains in data and methods, limitations per se, experienced in aviation, space, process, nuclear, offshore and transport systems and plants. The Lectures will reflect in summary the compromise in...

  6. On Bayesian System Reliability Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Soerensen Ringi, M

    1995-05-01

    The view taken in this thesis is that reliability, the probability that a system will perform a required function for a stated period of time, depends on a person`s state of knowledge. Reliability changes as this state of knowledge changes, i.e. when new relevant information becomes available. Most existing models for system reliability prediction are developed in a classical framework of probability theory and they overlook some information that is always present. Probability is just an analytical tool to handle uncertainty, based on judgement and subjective opinions. It is argued that the Bayesian approach gives a much more comprehensive understanding of the foundations of probability than the so called frequentistic school. A new model for system reliability prediction is given in two papers. The model encloses the fact that component failures are dependent because of a shared operational environment. The suggested model also naturally permits learning from failure data of similar components in non identical environments. 85 refs.

  7. On Bayesian System Reliability Analysis

    International Nuclear Information System (INIS)

    Soerensen Ringi, M.

    1995-01-01

    The view taken in this thesis is that reliability, the probability that a system will perform a required function for a stated period of time, depends on a person's state of knowledge. Reliability changes as this state of knowledge changes, i.e. when new relevant information becomes available. Most existing models for system reliability prediction are developed in a classical framework of probability theory and they overlook some information that is always present. Probability is just an analytical tool to handle uncertainty, based on judgement and subjective opinions. It is argued that the Bayesian approach gives a much more comprehensive understanding of the foundations of probability than the so called frequentistic school. A new model for system reliability prediction is given in two papers. The model encloses the fact that component failures are dependent because of a shared operational environment. The suggested model also naturally permits learning from failure data of similar components in non identical environments. 85 refs

  8. As reliable as the sun

    Science.gov (United States)

    Leijtens, J. A. P.

    2017-11-01

    Fortunately there is almost nothing as reliable as the sun which can consequently be utilized as a very reliable source of spacecraft power. In order to harvest this power, the solar panels have to be pointed towards the sun as accurately and reliably as possible. To this extend, sunsensors are available on almost every satellite to support vital sun-pointing capability throughout the mission, even in the deployment and save mode phases of the satellites life. Given the criticality of the application one would expect that after more than 50 years of sun sensor utilisation, such sensors would be fully matured and optimised. In actual fact though, the majority of sunsensors employed are still coarse sunsensors which have a proven extreme reliability but present major issues regarding albedo sensitivity and pointing accuracy.

  9. Steam generator reliability improvement project

    International Nuclear Information System (INIS)

    Blomgren, J.C.; Green, S.J.

    1987-01-01

    Upon successful completion of its research and development technology transfer program, the Electric Power Research Institute's Steam Generator Owners Group (SGOG II) will disband in December 1986 and be replaced in January 1987 by a successor project, the Steam Generator Reliability Project (SGRP). The new project, funded in the EPRI base program, will continue the emphasis on reliability and life extension that was carried forward by SGOG II. The objectives of SGOG II have been met. Causes and remedies have been identified for tubing corrosion problems, such as stress corrosion cracking and pitting, and steam generator technology has been improved in areas such as tube wear prediction and nondestructive evaluation (NDE). These actions have led to improved reliability of steam generators. Now the owners want to continue with a centrally managed program that builds on what has been learned. The goal is to continue to improve steam generator reliability and solve small problems before they become large problems

  10. Steam generator reliability improvement project

    International Nuclear Information System (INIS)

    Blomgren, J.C.; Green, S.J.

    1987-01-01

    Upon successful completion of its research and development technology transfer program, the Electric Power Research Institute's (EPRI's) Steam Generator Owners Group (SGOG II) will disband in December 1986, and be replaced in January 1987, by a successor project, the Steam Generator Reliability Project (SGRP). The new project, funded in the EPRI base program, will continue to emphasize reliability and life extension, which were carried forward by SGOG II. The objectives of SGOG II have been met. Causes and remedies have been identified for tubing corrosion problems such as stress corrosion cracking and pitting, and steam generator technology has been improved in areas such as tube wear prediction and nondestructive evaluation. These actions have led to improved reliability of steam generators. Now the owners want to continue with a centrally managed program that builds on what has been learned. The goal is to continue to improve steam generator reliability and to solve small problems before they become large problems

  11. Reliability analysis in intelligent machines

    Science.gov (United States)

    Mcinroy, John E.; Saridis, George N.

    1990-01-01

    Given an explicit task to be executed, an intelligent machine must be able to find the probability of success, or reliability, of alternative control and sensing strategies. By using concepts for information theory and reliability theory, new techniques for finding the reliability corresponding to alternative subsets of control and sensing strategies are proposed such that a desired set of specifications can be satisfied. The analysis is straightforward, provided that a set of Gaussian random state variables is available. An example problem illustrates the technique, and general reliability results are presented for visual servoing with a computed torque-control algorithm. Moreover, the example illustrates the principle of increasing precision with decreasing intelligence at the execution level of an intelligent machine.

  12. Innovations in power systems reliability

    CERN Document Server

    Santora, Albert H; Vaccaro, Alfredo

    2011-01-01

    Electrical grids are among the world's most reliable systems, yet they still face a host of issues, from aging infrastructure to questions of resource distribution. Here is a comprehensive and systematic approach to tackling these contemporary challenges.

  13. Reliability analysis and operator modelling

    International Nuclear Information System (INIS)

    Hollnagel, Erik

    1996-01-01

    The paper considers the state of operator modelling in reliability analysis. Operator models are needed in reliability analysis because operators are needed in process control systems. HRA methods must therefore be able to account both for human performance variability and for the dynamics of the interaction. A selected set of first generation HRA approaches is briefly described in terms of the operator model they use, their classification principle, and the actual method they propose. In addition, two examples of second generation methods are also considered. It is concluded that first generation HRA methods generally have very simplistic operator models, either referring to the time-reliability relationship or to elementary information processing concepts. It is argued that second generation HRA methods must recognise that cognition is embedded in a context, and be able to account for that in the way human reliability is analysed and assessed

  14. Reliability and Maintainability (RAM) Training

    Science.gov (United States)

    Lalli, Vincent R. (Editor); Malec, Henry A. (Editor); Packard, Michael H. (Editor)

    2000-01-01

    The theme of this manual is failure physics-the study of how products, hardware, software, and systems fail and what can be done about it. The intent is to impart useful information, to extend the limits of production capability, and to assist in achieving low-cost reliable products. In a broader sense the manual should do more. It should underscore the urgent need CI for mature attitudes toward reliability. Five of the chapters were originally presented as a classroom course to over 1000 Martin Marietta engineers and technicians. Another four chapters and three appendixes have been added, We begin with a view of reliability from the years 1940 to 2000. Chapter 2 starts the training material with a review of mathematics and a description of what elements contribute to product failures. The remaining chapters elucidate basic reliability theory and the disciplines that allow us to control and eliminate failures.

  15. Development of reliable pavement models.

    Science.gov (United States)

    2011-05-01

    The current report proposes a framework for estimating the reliability of a given pavement structure as analyzed by : the Mechanistic-Empirical Pavement Design Guide (MEPDG). The methodology proposes using a previously fit : response surface, in plac...

  16. Reliability of salivary testosterone measurements in diagnosis of Polycystic Ovarian Syndrome

    Directory of Open Access Journals (Sweden)

    Omnia Youssef

    2010-07-01

    Conclusion: Determination of salivary testosterone is a reliable method to detect changes in the concentration of available biologically active testosterone in the serum. Salivary testosterone provides a sensitive, simple, reliable, non-invasive and uncomplicated diagnostic approach for PCOS.

  17. Cost analysis of reliability investigations

    International Nuclear Information System (INIS)

    Schmidt, F.

    1981-01-01

    Taking Epsteins testing theory as a basis, premisses are formulated for the selection of cost-optimized reliability inspection plans. Using an example, the expected testing costs and inspection time periods of various inspection plan types, standardized on the basis of the exponential distribution, are compared. It can be shown that sequential reliability tests usually involve lower costs than failure or time-fixed tests. The most 'costly' test is to be expected with the inspection plan type NOt. (orig.) [de

  18. Nonparametric predictive inference in reliability

    International Nuclear Information System (INIS)

    Coolen, F.P.A.; Coolen-Schrijner, P.; Yan, K.J.

    2002-01-01

    We introduce a recently developed statistical approach, called nonparametric predictive inference (NPI), to reliability. Bounds for the survival function for a future observation are presented. We illustrate how NPI can deal with right-censored data, and discuss aspects of competing risks. We present possible applications of NPI for Bernoulli data, and we briefly outline applications of NPI for replacement decisions. The emphasis is on introduction and illustration of NPI in reliability contexts, detailed mathematical justifications are presented elsewhere

  19. Accelerator Availability and Reliability Issues

    Energy Technology Data Exchange (ETDEWEB)

    Steve Suhring

    2003-05-01

    Maintaining reliable machine operations for existing machines as well as planning for future machines' operability present significant challenges to those responsible for system performance and improvement. Changes to machine requirements and beam specifications often reduce overall machine availability in an effort to meet user needs. Accelerator reliability issues from around the world will be presented, followed by a discussion of the major factors influencing machine availability.

  20. Power peaking nuclear reliability factors

    International Nuclear Information System (INIS)

    Hassan, H.A.; Pegram, J.W.; Mays, C.W.; Romano, J.J.; Woods, J.J.; Warren, H.D.

    1977-11-01

    The Calculational Nuclear Reliability Factor (CNRF) assigned to the limiting power density calculated in reactor design has been determined. The CNRF is presented as a function of the relative power density of the fuel assembly and its radial local. In addition, the Measurement Nuclear Reliability Factor (MNRF) for the measured peak hot pellet power in the core has been evaluated. This MNRF is also presented as a function of the relative power density and radial local within the fuel assembly