WorldWideScience

Sample records for reliability initiative development

  1. Electric Power Infrastructure Reliability And Security Research And Development Initiative. Final report

    International Nuclear Information System (INIS)

    Dale, S.; Meeker, R.; Steurer, M.; Li, H.; Pamidi, S.; Rodrigo, H.; Suryanarayanan, S.; Cartes, D.; Ordonez, J.; Domijan, A.; Liu, W.; Cox, D.; McLaren, P.; Hovsapian, R.; Edwards, D.; Simmons, S.; Wilde, N.; Woodruff, S.; Kopriva, D.; Hussaini, Y.; Mohammed, O.; Zheng, J.; Baldwin, T.L.

    2008-01-01

    This is the final scientific/technical report for the Electric Power Infrastructure Reliability and Security R and D Initiative sponsored by the U.S. Department of Energy, Office of Electricity Delivery and Energy Reliability, under award number DE-FG02-05CH11292. This report covers results from the FSU-led, multi-institution effort conducted over the period 8/15/05 to 10/14/2007. Building upon existing infrastructure for power systems research, modeling, and simulation, the Center for Advanced Power Systems (CAPS) at Florida State University (FSU) is developing world-class programs in electric power systems research and education to support future electric power system needs and challenges. With U.S. Department of Energy Support, FSU CAPS has engaged in a multi-faceted effort to conduct basic and applied research towards understanding, developing, and deploying technologies and approaches that can lead to improved reliability and security of the North American electric power generation and delivery infrastructure. This wide-reaching project, through a number of carefully selected thrusts cutting across several research disciplines, set out to address key terrestrial electric utility power system issues and challenges. The challenges and the thrusts to address them were arrived at through analysis of a number of national reports and recommendations combined with input from an experienced multi-disciplined team of power systems research staff and faculty at FSU CAPS. The resulting project effort can be grouped into four major areas: - Power Systems and New Technology Insertion - Controls, Protection, and Security - Simulation Development - High Temperature Superconductivity (HTS)

  2. Development and Initial Reliability Testing of NAK-50+: A Nutrition Attitude and Knowledge Questionnaire for Adults 50+ Years of Age.

    Science.gov (United States)

    Ducak, Kate; Keller, Heather

    2016-03-01

    Few questionnaires to test nutrition knowledge and attitudes of older adults living independently in the community have been developed and tested to assess self-management tools such as Nutri-eSCREEN and other education programs. This study is a first step in the development of a questionnaire designed to evaluate the nutrition knowledge and attitudes of independent older adults (NAK-50+). The steps involved in this study were: (i) drafting initial questions based on the content of the Nutri-eSCREEN education material, (ii) using cognitive interviewing to determine if these questions were understandable and relevant (n = 9 adults ≥50 years of age), and (iii) completing test-retest reliability in a convenient community sample (n = 60 adults ≥50 years of age). Intra-class coefficients (ICC) and kappa were used to determine reliability. A 33-item questionnaire resulted from this development and analysis. ICC for the total score was 0.68 indicating good agreement and thus initial reliability. NAK-50+ is a face valid and reliable questionnaire that assesses nutrition knowledge and attitudes in independent adults aged ≥50 years. Further work to determine construct validity and to refine the questionnaire is warranted. Availability of the questionnaire for this age group will support rigorous evaluation of education and self-management interventions for this segment of the population.

  3. Electric Power Infrastructure Reliability and Security (EPIRS) Reseach and Development Initiative

    Energy Technology Data Exchange (ETDEWEB)

    Rick Meeker; L. Baldwin; Steinar Dale; Alexander Domijan; Davild Larbalestier; Hui Li; Peter McLaren; Sastry Pamidi; Horatio Rodrigo; Michael Steurer

    2010-03-31

    Power systems have become increasingly complex and face unprecedented challenges posed by population growth, climate change, national security issues, foreign energy dependence and an aging power infrastructure. Increased demand combined with increased economic and environmental constraints is forcing state, regional and national power grids to expand supply without the large safety and stability margins in generation and transmission capacity that have been the rule in the past. Deregulation, distributed generation, natural and man-made catastrophes and other causes serve to further challenge and complicate management of the electric power grid. To meet the challenges of the 21st century while also maintaining system reliability, the electric power grid must effectively integrate new and advanced technologies both in the actual equipment for energy conversion, transfer and use, and in the command, control, and communication systems by which effective and efficient operation of the system is orchestrated - in essence, the 'smart grid'. This evolution calls for advances in development, integration, analysis, and deployment approaches that ultimately seek to take into account, every step of the way, the dynamic behavior of the system, capturing critical effects due to interdependencies and interaction. This approach is necessary to better mitigate the risk of blackouts and other disruptions and to improve the flexibility and capacity of the grid. Building on prior Navy and Department of Energy investments in infrastructure and resources for electric power systems research, testing, modeling, and simulation at the Florida State University (FSU) Center for Advanced Power Systems (CAPS), this project has continued an initiative aimed at assuring reliable and secure grid operation through a more complete understanding and characterization of some of the key technologies that will be important in a modern electric system, while also fulfilling an education and

  4. Development, initial content validation and reliability of Nigerian ...

    African Journals Online (AJOL)

    Prevention strategies are effective only when there are epidemiological data for the targeted populations. The collection of such .... Proquest, Sport discuss and Cochrane as these are ... 0.74, test retest reliability 0.70; Diet: internal consistency:.

  5. Mechanical development for reliable reactor components

    International Nuclear Information System (INIS)

    Ross-Ross, P.A.; Metcalfe, R.

    1983-09-01

    The CANDU reactor has achieved worldwide distinction because of its reliable performance. To achieve this, special attention was given to the reliability and maintainability of components in the heavy water circuits. Development programs were initiated early in the history of the CANDU reactor to improve the effectiveness of pump seals, valves, and static seals because of unacceptable performance of the commercial equipment then available. As a result, pump seals with a five year life now appear achievable, and valves and static seals are no longer a significant concern in CANDU reactors. Increasing effort is being given remotely operated tools and fabrication systems for radioactive environments

  6. Concept development of the human reliability data bank

    International Nuclear Information System (INIS)

    Miller, D.P.

    1984-01-01

    The US Nuclear Regulatory Commission and Sandia National Laboratories initiated a three-phased research program in 1981 to develop a plan for a human reliability data bank. This research initiative was in response to the data needs of the nuclear power industry's probabilistic risk assessment community. The three phases are: (1) develop the data bank concept; (2) develop an implementation plan and conduct a feasibility test; and (3) assist the sponsor in implementing the data bank. This paper briefly describes some of the results of the work performed during Phase A and outlines the program elements schedules for Phase B

  7. The importance of reliability to the SunShot Initiative (Presentation Recording)

    Science.gov (United States)

    Jones-Albertus, Rebecca

    2015-09-01

    The U.S. Department of Energy's SunShot Initiative was launched in 2011 to make subsidy-free solar electricity cost competitive with conventional energy sources by the end of the decade. Research in reliability can play a major role in realizing the SunShot goal of 0.06/kWh. By improving photovoltaic module lifetime and reducing degradation rates, a system's lifetime energy output is increased. Increasing confidence in photovoltaic performance prediction can lower perceived investment risk and thus the cost of capital. Accordingly, in 2015, SunShot expects to award more than $40 million through its SunShot National Laboratory Multiyear Partnership (SuNLaMP) and Physics of Reliability: Evaluating Design Insights for Component Technologies in Solar (PREDICTS) 2 funding programs, for research into reliability topics such as determining acceleration factors, modeling degradation rates and failure mechanisms, improving predictive performance models, and developing new test methods and instrumentation.

  8. Learning reliable manipulation strategies without initial physical models

    Science.gov (United States)

    Christiansen, Alan D.; Mason, Matthew T.; Mitchell, Tom M.

    1990-01-01

    A description is given of a robot, possessing limited sensory and effectory capabilities but no initial model of the effects of its actions on the world, that acquires such a model through exploration, practice, and observation. By acquiring an increasingly correct model of its actions, it generates increasingly successful plans to achieve its goals. In an apparently nondeterministic world, achieving reliability requires the identification of reliable actions and a preference for using such actions. Furthermore, by selecting its training actions carefully, the robot can significantly improve its learning rate.

  9. An integrated approach to estimate storage reliability with initial failures based on E-Bayesian estimates

    International Nuclear Information System (INIS)

    Zhang, Yongjin; Zhao, Ming; Zhang, Shitao; Wang, Jiamei; Zhang, Yanjun

    2017-01-01

    Storage reliability that measures the ability of products in a dormant state to keep their required functions is studied in this paper. For certain types of products, Storage reliability may not always be 100% at the beginning of storage, unlike the operational reliability, which exist possible initial failures that are normally neglected in the models of storage reliability. In this paper, a new integrated technique, the non-parametric measure based on the E-Bayesian estimates of current failure probabilities is combined with the parametric measure based on the exponential reliability function, is proposed to estimate and predict the storage reliability of products with possible initial failures, where the non-parametric method is used to estimate the number of failed products and the reliability at each testing time, and the parameter method is used to estimate the initial reliability and the failure rate of storage product. The proposed method has taken into consideration that, the reliability test data of storage products containing the unexamined before and during the storage process, is available for providing more accurate estimates of both the initial failure probability and the storage failure probability. When storage reliability prediction that is the main concern in this field should be made, the non-parametric estimates of failure numbers can be used into the parametric models for the failure process in storage. In the case of exponential models, the assessment and prediction method for storage reliability is presented in this paper. Finally, a numerical example is given to illustrate the method. Furthermore, a detailed comparison between the proposed and traditional method, for examining the rationality of assessment and prediction on the storage reliability, is investigated. The results should be useful for planning a storage environment, decision-making concerning the maximum length of storage, and identifying the production quality. - Highlights:

  10. Reliability analysis and initial requirements for FC systems and stacks

    Science.gov (United States)

    Åström, K.; Fontell, E.; Virtanen, S.

    In the year 2000 Wärtsilä Corporation started an R&D program to develop SOFC systems for CHP applications. The program aims to bring to the market highly efficient, clean and cost competitive fuel cell systems with rated power output in the range of 50-250 kW for distributed generation and marine applications. In the program Wärtsilä focuses on system integration and development. System reliability and availability are key issues determining the competitiveness of the SOFC technology. In Wärtsilä, methods have been implemented for analysing the system in respect to reliability and safety as well as for defining reliability requirements for system components. A fault tree representation is used as the basis for reliability prediction analysis. A dynamic simulation technique has been developed to allow for non-static properties in the fault tree logic modelling. Special emphasis has been placed on reliability analysis of the fuel cell stacks in the system. A method for assessing reliability and critical failure predictability requirements for fuel cell stacks in a system consisting of several stacks has been developed. The method is based on a qualitative model of the stack configuration where each stack can be in a functional, partially failed or critically failed state, each of the states having different failure rates and effects on the system behaviour. The main purpose of the method is to understand the effect of stack reliability, critical failure predictability and operating strategy on the system reliability and availability. An example configuration, consisting of 5 × 5 stacks (series of 5 sets of 5 parallel stacks) is analysed in respect to stack reliability requirements as a function of predictability of critical failures and Weibull shape factor of failure rate distributions.

  11. The development of specific reliability database for a Korean Nuclear Power Plant

    International Nuclear Information System (INIS)

    Park, S.K.; Park, B.L.; Kim, M.R.; Jeong, B.H.; Kwon, J.J.

    2001-01-01

    The object of this study is to develop reliability database for PSA application such as failure rate for safety related components, test and maintenance unavailability and common cause failure factors except for initiating event frequencies during the period of 10 years from 1990 to 1999. In this study we developed plant-specific reliability database for PSA (Probabilistic Safety Assessment) application and compared it with generic reliability database developed in the US such as EPRI-URD, IEEE-500, NUCLARR etc, in the component type basis. We have found that there are some general differences in the component failure rate and test and maintenance unavailability. We described the characteristics of differences for some important component types. We also analyzed the reasons for the differences in the aspect of maintenance terms such as maintenance policy and maintenance practice. We found that maintenance terms are important factors for the numbers of plant-specific reliability database. (author)

  12. Zero tolerance for failure. An AREVA initiative to improve reliability

    International Nuclear Information System (INIS)

    Lippert, Hans-Joachim; Gentet, Guy; Mollard, Pierre; Garner, Norman

    2010-01-01

    Significant improvements in fuel reliability have been realized over the past 2 decades, but total elimination of failures has remained elusive. Driving reliability to higher levels requires a philosophy that does not accept that even infrequent and isolated failures are inevitable - it was on this foundation that Areva's Zero Tolerance for Failure (ZTF) initiative was established. This is not in itself either a program or project, but a fundamental shift in the way of thinking about work according to the following four principles: - Failures are avoidable, - Zero failures are our goal, - We will respond rapidly to any failure, - We succeed when we fix failures in a way that precludes recurrence. The shift to a ZTF philosophy is a broad change in corporate culture that expands the concept of failure far beyond cases where fuel rod cladding integrity is breached. While this paper specifically illustrates the ways in which ZTF has shaped the company's response to enhancing fuel rod reliability, ZTF extends to any failures of fuel products to deliver expected levels of performance, manufacturing processes to meet specifications and high first-pass acceptance criteria, and beyond to error-free performance of engineering analyses and cycle design and licensing services. Application of ZTF to enhancing fuel reliability deploys efforts in the areas of manufacturing, human factors, design, R and D, processes and product strategy. In order to achieve the necessary improvements, a number of important actions have been initiated across regions and facilities. In addition to these global scale projects and measures, each region contributes by adopting measures which are relevant to its particular activities and market needs. (orig.)

  13. Development of the Centralized Reliability Data Organization (CREDO)

    International Nuclear Information System (INIS)

    Haas, P.M.; Bott, T.F.; Knee, H.E.; Manning, J.J.; Hudson, S.D.; Greene, N.M.; Woodside, M.A.

    1979-01-01

    CREDO has been established to meet the needs of the US Breeder Reactor Program and the advanced reactor community for a centralized source of accurate reliability/maintainability data and data-related services. The center provides for a comprehensive program of collection, evaluation, and dissemination of data and for necessary user services. A steering committee of nationally recognized experts has been formed to guide CREDO development and operation. Historic data have been collected, analyzed, and published. Routine, continuous data collection and processing has been initiated at US sites. Interfaces with existing data bases have been established. Special user services are under development

  14. Developing Reliable Life Support for Mars

    Science.gov (United States)

    Jones, Harry W.

    2017-01-01

    A human mission to Mars will require highly reliable life support systems. Mars life support systems may recycle water and oxygen using systems similar to those on the International Space Station (ISS). However, achieving sufficient reliability is less difficult for ISS than it will be for Mars. If an ISS system has a serious failure, it is possible to provide spare parts, or directly supply water or oxygen, or if necessary bring the crew back to Earth. Life support for Mars must be designed, tested, and improved as needed to achieve high demonstrated reliability. A quantitative reliability goal should be established and used to guide development t. The designers should select reliable components and minimize interface and integration problems. In theory a system can achieve the component-limited reliability, but testing often reveal unexpected failures due to design mistakes or flawed components. Testing should extend long enough to detect any unexpected failure modes and to verify the expected reliability. Iterated redesign and retest may be required to achieve the reliability goal. If the reliability is less than required, it may be improved by providing spare components or redundant systems. The number of spares required to achieve a given reliability goal depends on the component failure rate. If the failure rate is under estimated, the number of spares will be insufficient and the system may fail. If the design is likely to have undiscovered design or component problems, it is advisable to use dissimilar redundancy, even though this multiplies the design and development cost. In the ideal case, a human tended closed system operational test should be conducted to gain confidence in operations, maintenance, and repair. The difficulty in achieving high reliability in unproven complex systems may require the use of simpler, more mature, intrinsically higher reliability systems. The limitations of budget, schedule, and technology may suggest accepting lower and

  15. System reliability developments in structural engineering

    International Nuclear Information System (INIS)

    Moses, F.

    1982-01-01

    Two major limitations occur in present structural design code developments utilizing reliability theory. The notional system reliabilities may differ significantly from calibrated component reliabilities. Secondly, actual failures are often due to gross errors not reflected in most present code formats. A review is presented of system reliability methods and further new concepts are developed. The incremental load approach for identifying and expressing collapse modes is expanded by employing a strategy to identify and enumerate the significant structural collapse modes. It further isolates the importance of critical components in the system performance. Ductile and brittle component behavior and strength correlation is reflected in the system model and illustrated in several examples. Modal combinations for the system reliability are also reviewed. From these developments a system factor can be addended to component safety checking equations. Values may be derived from system behavior by substituting in a damage model which accounts for the response range from component failure to collapse. Other strategies are discussed which emphasize quality assurance during design and in-service inspection for components whose behavior is critical to the system reliability. (Auth.)

  16. Development of reliability-based safety enhancement technology

    International Nuclear Information System (INIS)

    Kim, Kil Yoo; Han, Sang Hoon; Jang, Seung Cherl

    2002-04-01

    This project aims to develop critical technologies and the necessary reliability DB for maximizing the economics in the NPP operation with keeping the safety using the information of the risk (or reliability). For the research goal, firstly the four critical technologies(Risk Informed Tech. Spec. Optimization, Risk Informed Inservice Testing, On-line Maintenance, Maintenance Rule) for RIR and A have been developed. Secondly, KIND (Korea Information System for Nuclear Reliability Data) has been developed. Using KIND, YGN 3,4 and UCN 3,4 component reliability DB have been established. A reactor trip history DB for all NPP in Korea also has been developed and analyzed. Finally, a detailed reliability analysis of RPS/ESFAS for KNSP has been performed. With the result of the analysis, the sensitivity analysis also has been performed to optimize the AOT/STI of tech. spec. A statistical analysis procedure and computer code have been developed for the set point drift analysis

  17. Component reliability analysis for development of component reliability DB of Korean standard NPPs

    International Nuclear Information System (INIS)

    Choi, S. Y.; Han, S. H.; Kim, S. H.

    2002-01-01

    The reliability data of Korean NPP that reflects the plant specific characteristics is necessary for PSA and Risk Informed Application. We have performed a project to develop the component reliability DB and calculate the component reliability such as failure rate and unavailability. We have collected the component operation data and failure/repair data of Korean standard NPPs. We have analyzed failure data by developing a data analysis method which incorporates the domestic data situation. And then we have compared the reliability results with the generic data for the foreign NPPs

  18. Development of reliability databases and the particular requirements of probabilistic risk analyses

    International Nuclear Information System (INIS)

    Meslin, T.

    1989-01-01

    Nuclear utilities have an increasing need to develop reliability databases for their operating experience. The purposes of these databases are often multiple, including both equipment maintenance aspects and probabilistic risk analyses. EDF has therefore been developing experience feedback databases, including the Reliability Data Recording System (SRDF) and the Event File, as well as the history of numerous operating documents. Furthermore, since the end of 1985, EDF has been preparing a probabilistic safety analysis applied to one 1,300 MWe unit, for which a large amount of data of French origin is necessary. This data concerns both component reliability parameters and initiating event frequencies. The study has thus been an opportunity for trying out the performance databases for a specific application, as well as in-depth audits of a number of nuclear sites to make it possible to validate numerous results. Computer aided data collection is also on trial in a number of plants. After describing the EDF operating experience feedback files, we discuss the particular requirements of probabilistic risk analyses, and the resources implemented by EDF to satisfy them. (author). 5 refs

  19. Reliability benefits of dispersed wind resource development

    International Nuclear Information System (INIS)

    Milligan, M.; Artig, R.

    1998-05-01

    Generating capacity that is available during the utility peak period is worth more than off-peak capacity. Wind power from a single location might not be available during enough of the peak period to provide sufficient value. However, if the wind power plant is developed over geographically disperse locations, the timing and availability of wind power from these multiple sources could provide a better match with the utility's peak load than a single site. There are other issues that arise when considering disperse wind plant development. Singular development can result in economies of scale and might reduce the costs of obtaining multiple permits and multiple interconnections. However, disperse development can result in cost efficiencies if interconnection can be accomplished at lower voltages or at locations closer to load centers. Several wind plants are in various stages of planning or development in the US. Although some of these are small-scale demonstration projects, significant wind capacity has been developed in Minnesota, with additional developments planned in Wyoming, Iowa and Texas. As these and other projects are planned and developed, there is a need to perform analysis of the value of geographically disperse sites on the reliability of the overall wind plant.This paper uses a production-cost/reliability model to analyze the reliability of several wind sites in the state of Minnesota. The analysis finds that the use of a model with traditional reliability measures does not produce consistent, robust results. An approach based on fuzzy set theory is applied in this paper, with improved results. Using such a model, the authors find that system reliability can be optimized with a mix of disperse wind sites

  20. Quality assurance requirements for the reliability of nuclear power plants in developing countries

    International Nuclear Information System (INIS)

    Bhutta, S.M.

    1978-01-01

    Quality Assurance (QA) has not been taken very seriously in developing countries despite their having significant nuclear power programmes. This may affect plant reliability and demands that urgent and serious attention be given to the development and implementation of Quality Assurance programmes according to local conditions. Confusion has been created by the differences in definitions and interpretations of terminologies of Quality Assurance and Control. Problems have been aggravated by the lack of clearly defined responsibilities and accountabilities during the projects execution phases of site selection, data collection, design, equipment fabrication and construction, etc. Therefore, reliability of nuclear power plants in developing countries is relatively low. But whenever some programme of QA has been implemented it has helped to improve the plant performance. This is highlighted in this paper by the practical examples for the experience of Karachi Nuclear Power Plant whose forced outages have been reduced by over a half within a period of 3 years. In view of the benefits, a QA programme for Chashma Nuclear Power Project has also been initiated. In this paper urgency is emphasized for the establishment and implementation of a formal QA programme in the developing countries if the reactor suppliers and purchasers both want to ensure higher reliability of their plants. The best way that management can play its role effectively is by setting up a strong QA organization with local personnel, thus helping to attain self-reliance and higher reliability during plant operation. (author)

  1. A Validity and Reliability Study on the Development of the Values Scale in Turkey

    Science.gov (United States)

    Dilmac, Bulent; Aricak, Osman Tolga; Cesur, Sevim

    2014-01-01

    The purpose of the present study is to examine the initial psychometric properties of the Values Scale for adults. While developing the first stage of the Values Scale, open-ended data on the values held by 216 university students were obtained. During the second stage, the validity and reliability studies of the 60-item Values Scale obtained by…

  2. Development of a highly reliable CRT processor

    International Nuclear Information System (INIS)

    Shimizu, Tomoya; Saiki, Akira; Hirai, Kenji; Jota, Masayoshi; Fujii, Mikiya

    1996-01-01

    Although CRT processors have been employed by the main control board to reduce the operator's workload during monitoring, the control systems are still operated by hardware switches. For further advancement, direct controller operation through a display device is expected. A CRT processor providing direct controller operation must be as reliable as the hardware switches are. The authors are developing a new type of highly reliable CRT processor that enables direct controller operations. In this paper, we discuss the design principles behind a highly reliable CRT processor. The principles are defined by studies of software reliability and of the functional reliability of the monitoring and operation systems. The functional configuration of an advanced CRT processor is also addressed. (author)

  3. A New Tool for Nutrition App Quality Evaluation (AQEL): Development, Validation, and Reliability Testing.

    Science.gov (United States)

    DiFilippo, Kristen Nicole; Huang, Wenhao; Chapman-Novakofski, Karen M

    2017-10-27

    The extensive availability and increasing use of mobile apps for nutrition-based health interventions makes evaluation of the quality of these apps crucial for integration of apps into nutritional counseling. The goal of this research was the development, validation, and reliability testing of the app quality evaluation (AQEL) tool, an instrument for evaluating apps' educational quality and technical functionality. Items for evaluating app quality were adapted from website evaluations, with additional items added to evaluate the specific characteristics of apps, resulting in 79 initial items. Expert panels of nutrition and technology professionals and app users reviewed items for face and content validation. After recommended revisions, nutrition experts completed a second AQEL review to ensure clarity. On the basis of 150 sets of responses using the revised AQEL, principal component analysis was completed, reducing AQEL into 5 factors that underwent reliability testing, including internal consistency, split-half reliability, test-retest reliability, and interrater reliability (IRR). Two additional modifiable constructs for evaluating apps based on the age and needs of the target audience as selected by the evaluator were also tested for construct reliability. IRR testing using intraclass correlations (ICC) with all 7 constructs was conducted, with 15 dietitians evaluating one app. Development and validation resulted in the 51-item AQEL. These were reduced to 25 items in 5 factors after principal component analysis, plus 9 modifiable items in two constructs that were not included in principal component analysis. Internal consistency and split-half reliability of the following constructs derived from principal components analysis was good (Cronbach alpha >.80, Spearman-Brown coefficient >.80): behavior change potential, support of knowledge acquisition, app function, and skill development. App purpose split half-reliability was .65. Test-retest reliability showed no

  4. Building and integrating reliability models in a Reliability-Centered-Maintenance approach

    International Nuclear Information System (INIS)

    Verite, B.; Villain, B.; Venturini, V.; Hugonnard, S.; Bryla, P.

    1998-03-01

    Electricite de France (EDF) has recently developed its OMF-Structures method, designed to optimize preventive maintenance of passive structures such as pipes and support, based on risk. In particular, reliability performances of components need to be determined; it is a two-step process, consisting of a qualitative sort followed by a quantitative evaluation, involving two types of models. Initially, degradation models are widely used to exclude some components from the field of preventive maintenance. The reliability of the remaining components is then evaluated by means of quantitative reliability models. The results are then included in a risk indicator that is used to directly optimize preventive maintenance tasks. (author)

  5. Development of web-based reliability data base platform

    International Nuclear Information System (INIS)

    Hwang, Seok Won; Lee, Chang Ju; Sung, Key Yong

    2004-01-01

    Probabilistic safety assessment (PSA) is a systematic technique which estimates the degree of risk impacts to the public due to an accident scenario. Estimating the occurrence frequencies and consequences of potential scenarios requires a thorough analysis of the accident details and all fundamental parameters. The robustness of PSA to check weaknesses in a design and operation will allow a better informed and balanced decision to be reached. The fundamental parameters for PSA, such as the component failure rates, should be estimated under the condition of steady collection of the evidence throughout the operational period. However, since any single plant data does not sufficiently enough to provide an adequate PSA result, in actual, the whole operating data was commonly used to estimate the reliability parameters for the same type of components. The reliability data of any component type consists of two categories; the generic that is based on the operating experiences of whole plants, and the plant-specific that is based on the operation of a specific plant of interest. The generic data is highly essential for new or recently-built nuclear power plants (NPPs). Generally, the reliability data base may be categorized into the component reliability, initiating event frequencies, human performance, and so on. Among these data, the component reliability seems a key element because it has the most abundant population. Therefore, the component reliability data is essential for taking a part in the quantification of accident sequences because it becomes an input of various basic events which consists of the fault tree

  6. Development, initial reliability and validity testing of an observational tool for assessing technical skills of operating room nurses.

    Science.gov (United States)

    Sevdalis, Nick; Undre, Shabnam; Henry, Janet; Sydney, Elaine; Koutantji, Mary; Darzi, Ara; Vincent, Charles A

    2009-09-01

    The recent emergence of the Systems Approach to the safety and quality of surgical care has triggered individual and team skills training modules for surgeons and anaesthetists and relevant observational assessment tools have been developed. To develop an observational tool that captures operating room (OR) nurses' technical skill and can be used for assessment and training. The Imperial College Assessment of Technical Skills for Nurses (ICATS-N) assesses (i) gowning and gloving, (ii) setting up instrumentation, (iii) draping, and (iv) maintaining sterility. Three to five observable behaviours have been identified for each skill and are rated on 1-6 scales. Feasibility and aspects of reliability and validity were assessed in 20 simulation-based crisis management training modules for trainee nurses and doctors, carried out in a Simulated Operating Room. The tool was feasible to use in the context of simulation-based training. Satisfactory reliability (Cronbach alpha) was obtained across trainers' and trainees' scores (analysed jointly and separately). Moreover, trainer nurse's ratings of the four skills correlated positively, thus indicating adequate content validity. Trainer's and trainees' ratings did not correlate. Assessment of OR nurses' technical skill is becoming a training priority. The present evidence suggests that the ICATS-N could be considered for use as an assessment/training tool for junior OR nurses.

  7. High-Reliable PLC RTOS Development and RPS Structure Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Sohn, H. S.; Song, D. Y.; Sohn, D. S.; Kim, J. H. [Enersys Co., Daejeon (Korea, Republic of)

    2008-04-15

    One of the KNICS objectives is to develop a platform for Nuclear Power Plant(NPP) I and C(Instrumentation and Control) system, especially plant protection system. The developed platform is POSAFE-Q and this work supports the development of POSAFE-Q with the development of high-reliable real-time operating system(RTOS) and programmable logic device(PLD) software. Another KNICS objective is to develop safety I and C systems, such as Reactor Protection System(RPS) and Engineered Safety Feature-Component Control System(ESF-CCS). This work plays an important role in the structure analysis for RPS. Validation and verification(V and V) of the safety critical software is an essential work to make digital plant protection system highly reliable and safe. Generally, the reliability and safety of software based system can be improved by strict quality assurance framework including the software development itself. In other words, through V and V, the reliability and safety of a system can be improved and the development activities like software requirement specification, software design specification, component tests, integration tests, and system tests shall be appropriately documented for V and V.

  8. High-Reliable PLC RTOS Development and RPS Structure Analysis

    International Nuclear Information System (INIS)

    Sohn, H. S.; Song, D. Y.; Sohn, D. S.; Kim, J. H.

    2008-04-01

    One of the KNICS objectives is to develop a platform for Nuclear Power Plant(NPP) I and C(Instrumentation and Control) system, especially plant protection system. The developed platform is POSAFE-Q and this work supports the development of POSAFE-Q with the development of high-reliable real-time operating system(RTOS) and programmable logic device(PLD) software. Another KNICS objective is to develop safety I and C systems, such as Reactor Protection System(RPS) and Engineered Safety Feature-Component Control System(ESF-CCS). This work plays an important role in the structure analysis for RPS. Validation and verification(V and V) of the safety critical software is an essential work to make digital plant protection system highly reliable and safe. Generally, the reliability and safety of software based system can be improved by strict quality assurance framework including the software development itself. In other words, through V and V, the reliability and safety of a system can be improved and the development activities like software requirement specification, software design specification, component tests, integration tests, and system tests shall be appropriately documented for V and V.

  9. NDE reliability and SAFT-UT final development

    International Nuclear Information System (INIS)

    Doctor, S.R.; Deffenbaugh, J.D.; Good, M.S.; Green, E.R.; Heasler, P.G.; Reid, L.D.; Simonen, F.A.; Spanner, J.C.; Taylor, T.T.; Vo, T.V.

    1990-01-01

    The Evaluation and Improvement of NDE Reliability for Inservice Inspection of Light Water Reactors (NDE Reliability) program at the Pacific Northwest Laboratory (PNL) was established by the US Nuclear Regulatory Commission (NRC) to determine the reliability of current inservice inspection (ISI) techniques and to develop recommendations that will ensure a suitably high inspection reliability. This is a progress report covering the programmatic work from October 1987 through September 1988. The program for Validation and Technology Transfer for SAFT-UT is designed to accomplish the final step of moving research results into beneficial application. Accomplishments for FY88 in Synthetic Aperture Focusing of Ultrasonic Test data (SAFT-UT) under this program are discussed in this paper. The information is treated under the copies of Code Activities, Field Validation, and Seminars. (orig.)

  10. Calculation of noninformative prior of reliability parameter and initiating event frequency with Jeffreys method

    International Nuclear Information System (INIS)

    He Jie; Zhang Binbin

    2013-01-01

    In the probabilistic safety assessment (PSA) of nuclear power plants, there are few historical records on some initiating event frequencies or component failures in industry. In order to determine the noninformative priors of such reliability parameters and initiating event frequencies, the Jeffreys method in Bayesian statistics was employed. The mathematical mechanism of the Jeffreys prior and the simplified constrained noninformative distribution (SCNID) were elaborated in this paper. The Jeffreys noninformative formulas and the credible intervals of the Gamma-Poisson and Beta-Binomial models were introduced. As an example, the small break loss-of-coolant accident (SLOCA) was employed to show the application of the Jeffreys prior in determining an initiating event frequency. The result shows that the Jeffreys method is an effective method for noninformative prior calculation. (authors)

  11. Approach to developing reliable space reactor power systems

    International Nuclear Information System (INIS)

    Mondt, J.F.; Shinbrot, C.H.

    1991-01-01

    The Space Reactor Power System Project is in the engineering development phase of a three-phase program. During Phase II, the Engineering Development Phase, the SP-100 Project has defined and is pursuing a new approach to developing reliable power systems. The approach to developing such a system during the early technology phase is described in this paper along with some preliminary examples to help explain the approach. Developing reliable components to meet space reactor power system requirements is based on a top down systems approach which includes a point design based on a detailed technical specification of a 100 kW power system

  12. Reliability studies in a developing technology

    International Nuclear Information System (INIS)

    Mitchell, L.A.; Osgood, C.; Radcliffe, S.J.

    1975-01-01

    The standard methods of reliability analysis can only be applied if valid failure statistics are available. In a developing technology the statistics which have been accumulated, over many years of conventional experience, are often rendered useless by environmental effects. Thus new data, which take account of the new environment, are required. This paper discusses the problem of optimizing the acquisition of these data when time-scales and resources are limited. It is concluded that the most fruitful strategy in assessing the reliability of mechanisms is to study the failures of individual joints whilst developing, where necessary, analytical tools to facilitate the use of these data. The approach is illustrated by examples from the field of tribology. Failures of rolling element bearings in moist, high-pressure carbon dioxide illustrate the important effects of apparently minor changes in the environment. New analytical techniques are developed from a study of friction failures in sliding joints. (author)

  13. Equipment Reliability Process in Krsko NPP

    International Nuclear Information System (INIS)

    Gluhak, M.

    2016-01-01

    To ensure long-term safe and reliable plant operation, equipment operability and availability must also be ensured by setting a group of processes to be established within the nuclear power plant. Equipment reliability process represents the integration and coordination of important equipment reliability activities into one process, which enables equipment performance and condition monitoring, preventive maintenance activities development, implementation and optimization, continuous improvement of the processes and long term planning. The initiative for introducing systematic approach for equipment reliability assuring came from US nuclear industry guided by INPO (Institute of Nuclear Power Operations) and by participation of several US nuclear utilities. As a result of the initiative, first edition of INPO document AP-913, 'Equipment Reliability Process Description' was issued and it became a basic document for implementation of equipment reliability process for the whole nuclear industry. The scope of equipment reliability process in Krsko NPP consists of following programs: equipment criticality classification, preventive maintenance program, corrective action program, system health reports and long-term investment plan. By implementation, supervision and continuous improvement of those programs, guided by more than thirty years of operating experience, Krsko NPP will continue to be on a track of safe and reliable operation until the end of prolonged life time. (author).

  14. Reliability Evaluation for Optimizing Electricity Supply in a Developing Country

    Directory of Open Access Journals (Sweden)

    Mark Ndubuka NWOHU

    2007-09-01

    Full Text Available The reliability standards for electricity supply in a developing country, like Nigeria, have to be determined on past engineering principles and practice. Because of the high demand of electrical power due to rapid development, industrialization and rural electrification; the economic, social and political climate in which the electric power supply industry now operates should be critically viewed to ensure that the production of electrical power should be augmented and remain uninterrupted. This paper presents an economic framework that can be used to optimize electric power system reliability. Finally the cost models are investigated to take into account the economic analysis of system reliability, which can be periodically updated to improve overall reliability of electric power system.

  15. Suncor maintenance and reliability

    Energy Technology Data Exchange (ETDEWEB)

    Little, S. [Suncor Energy, Calgary, AB (Canada)

    2006-07-01

    Fleet maintenance and reliability at Suncor Energy was discussed in this presentation, with reference to Suncor Energy's primary and support equipment fleets. This paper also discussed Suncor Energy's maintenance and reliability standard involving people, processes and technology. An organizational maturity chart that graphed organizational learning against organizational performance was illustrated. The presentation also reviewed the maintenance and reliability framework; maintenance reliability model; the process overview of the maintenance and reliability standard; a process flow chart of maintenance strategies and programs; and an asset reliability improvement process flow chart. An example of an improvement initiative was included, with reference to a shovel reliability review; a dipper trip reliability investigation; bucket related failures by type and frequency; root cause analysis of the reliability process; and additional actions taken. Last, the presentation provided a graph of the results of the improvement initiative and presented the key lessons learned. tabs., figs.

  16. Human factor reliability program

    International Nuclear Information System (INIS)

    Knoblochova, L.

    2017-01-01

    The human factor's reliability program was at Slovenske elektrarne, a.s. (SE) nuclear power plants. introduced as one of the components Initiatives of Excellent Performance in 2011. The initiative's goal was to increase the reliability of both people and facilities, in response to 3 major areas of improvement - Need for improvement of the results, Troubleshooting support, Supporting the achievement of the company's goals. The human agent's reliability program is in practice included: - Tools to prevent human error; - Managerial observation and coaching; - Human factor analysis; -Quick information about the event with a human agent; -Human reliability timeline and performance indicators; - Basic, periodic and extraordinary training in human factor reliability(authors)

  17. Scale for positive aspects of caregiving experience: development, reliability, and factor structure.

    Science.gov (United States)

    Kate, N; Grover, S; Kulhara, P; Nehra, R

    2012-06-01

    OBJECTIVE. To develop an instrument (Scale for Positive Aspects of Caregiving Experience [SPACE]) that evaluates positive caregiving experience and assess its psychometric properties. METHODS. Available scales which assess some aspects of positive caregiving experience were reviewed and a 50-item questionnaire with a 5-point rating was constructed. In all, 203 primary caregivers of patients with severe mental disorders were asked to complete the questionnaire. Internal consistency, test-retest reliability, cross-language reliability, split-half reliability, and face validity were evaluated. Principal component factor analysis was run to assess the factorial validity of the scale. RESULTS. The scale developed as part of the study was found to have good internal consistency, test-retest reliability, cross-language reliability, split-half reliability, and face validity. Principal component factor analysis yielded a 4-factor structure, which also had good test-retest reliability and cross-language reliability. There was a strong correlation between the 4 factors obtained. CONCLUSION. The SPACE developed as part of this study has good psychometric properties.

  18. Development of RBDGG Solver and Its Application to System Reliability Analysis

    International Nuclear Information System (INIS)

    Kim, Man Cheol

    2010-01-01

    For the purpose of making system reliability analysis easier and more intuitive, RBDGG (Reliability Block diagram with General Gates) methodology was introduced as an extension of the conventional reliability block diagram. The advantage of the RBDGG methodology is that the structure of a RBDGG model is very similar to the actual structure of the analyzed system, and therefore the modeling of a system for system reliability and unavailability analysis becomes very intuitive and easy. The main idea of the development of the RBDGG methodology is similar with that of the development of the RGGG (Reliability Graph with General Gates) methodology, which is an extension of a conventional reliability graph. The newly proposed methodology is now implemented into a software tool, RBDGG Solver. RBDGG Solver was developed as a WIN32 console application. RBDGG Solver receives information on the failure modes and failure probabilities of each component in the system, along with the connection structure and connection logics among the components in the system. Based on the received information, RBDGG Solver automatically generates a system reliability analysis model for the system, and then provides the analysis results. In this paper, application of RBDGG Solver to the reliability analysis of an example system, and verification of the calculation results are provided for the purpose of demonstrating how RBDGG Solver is used for system reliability analysis

  19. Foundations for a time reliability correlation system to quantify human reliability

    International Nuclear Information System (INIS)

    Dougherty, E.M. Jr.; Fragola, J.R.

    1988-01-01

    Time reliability correlations (TRCs) have been used in human reliability analysis (HRA) in conjunction with probabilistic risk assessment (PRA) to quantify post-initiator human failure events. The first TRCs were judgmental but recent data taken from simulators have provided evidence for development of a system of TRCs. This system has the equational form: t = tau R X tau U , where the first factor is the lognormally distributed random variable of successful response time, derived from the simulator data, and the second factor is a unitary lognormal random variable to account for uncertainty in the model. The first random variable is further factored into a median response time and a factor to account for the dominant type of behavior assumed to be involved in the response and a second factor to account for other influences on the reliability of the response

  20. Tracking reliability for space cabin-borne equipment in development by Crow model.

    Science.gov (United States)

    Chen, J D; Jiao, S J; Sun, H L

    2001-12-01

    Objective. To study and track the reliability growth of manned spaceflight cabin-borne equipment in the course of its development. Method. A new technique of reliability growth estimation and prediction, which is composed of the Crow model and test data conversion (TDC) method was used. Result. The estimation and prediction value of the reliability growth conformed to its expectations. Conclusion. The method could dynamically estimate and predict the reliability of the equipment by making full use of various test information in the course of its development. It offered not only a possibility of tracking the equipment reliability growth, but also the reference for quality control in manned spaceflight cabin-borne equipment design and development process.

  1. The initial development of the Pregnancy-related Anxiety Scale.

    Science.gov (United States)

    Brunton, Robyn J; Dryer, Rachel; Saliba, Anthony; Kohlhoff, Jane

    2018-05-30

    Pregnancy-related anxiety is a distinct anxiety characterised by pregnancy-specific concerns. This anxiety is consistently associated with adverse birth outcomes, and obstetric and paediatric risk factors, associations generally not seen with other anxieties. The need exists for a psychometrically sound scale for this anxiety type. This study, therefore, reports on the initial development of the Pregnancy-related Anxiety Scale. The item pool was developed following a literature review and the formulation of a definition for pregnancy-related anxiety. An Expert Review Panel reviewed the definition, item pool and test specifications. Pregnant women were recruited online (N=671). Using a subsample (N=262, M=27.94, SD=4.99), fourteen factors were extracted using Principal Components Analysis accounting for 63.18% of the variance. Further refinement resulted in 11 distinct factors. Confirmatory Factor Analysis further tested the model with a second subsample (N=369, M=26.59, SD=4.76). After additional refinement, the resulting model was a good fit with nine factors (childbirth, appearance, attitudes towards childbirth, motherhood, acceptance, anxiety, medical, avoidance, and baby concerns). Internal consistency reliability was good with the majority of subscales exceeding α=.80. The Pregnancy-related Anxiety Scale is easy to administer with higher scores indicative of greater pregnancy-related anxiety. The inclusion of reverse-scored items is a potential limitation with poorer reliability evident for these factors. Although still in its development stage, the Pregnancy-related Anxiety Scale will eventually be useful both clinically (affording early intervention) and in research settings. Copyright © 2018 Australian College of Midwives. Published by Elsevier Ltd. All rights reserved.

  2. Author Correction: Reliability and feasibility of gait initiation centre-of-pressure excursions using a Wii® Balance Board in older adults at risk of falling.

    Science.gov (United States)

    Lee, James; Webb, Graham; Shortland, Adam P; Edwards, Rebecca; Wilce, Charlotte; Jones, Gareth D

    2018-05-12

    In the original publication, the article title was incorrectly published as 'Reliability and feasibility of gait initiation centre-of-pressure excursions using a Wii® Balance Board in older adults at risk of failing'. The correct title should read as 'Reliability and feasibility of gait initiation centre-of-pressure excursions using a Wii® Balance Board in older adults at risk of falling'.

  3. A measure of smoking abstinence-related motivational engagement: development and initial validation.

    Science.gov (United States)

    Simmons, Vani N; Heckman, Bryan W; Ditre, Joseph W; Brandon, Thomas H

    2010-04-01

    Although a great deal of research has focused on measuring motivation and readiness to quit smoking, little research has assessed gross motivational changes after a smoker has made an attempt to quit smoking. Unlike previous single-item global measures of motivation to remain abstinent, we developed the abstinence-related motivational engagement (ARME) scale to evaluate the degree to which abstinence motivation is reflected by an ex-smoker's daily experience in areas that include cognitive effort, priority, vigilance, and excitement. The aim of this study was to collect reliability and initial construct validity data on this new measure. Participants were 199 ex-smokers recruited from the community and smoking cessation Web sites. Participants completed online measures including a global motivation measure, the ARME scale, demographic questionnaire, and a measure of cessation self-efficacy. The 16-item ARME questionnaire demonstrated high internal consistency reliability (alpha = .89). Analyses provided support for convergent, discriminant, and construct validity of the scale. ARME demonstrated the predicted correlation with a traditional measure of global cessation motivation, yet, also as predicted, only the ARME was negatively associated with length of abstinence. Moreover, as hypothesized, ex-smokers engaged in the quitting process via ongoing smoking Web site participation showed higher ARME scores than a comparison community sample. A five-item short form demonstrated similar psychometric properties. This study provided initial support for the ARME construct and offers two versions of a reliable instrument for assessing this construct. Future research will examine the ARME as a predictor of cessation outcome and a potential target for relapse prevention.

  4. Long-term Mechanical Circulatory Support System reliability recommendation by the National Clinical Trial Initiative subcommittee.

    Science.gov (United States)

    Lee, James

    2009-01-01

    The Long-Term Mechanical Circulatory Support (MCS) System Reliability Recommendation was published in the American Society for Artificial Internal Organs (ASAIO) Journal and the Annals of Thoracic Surgery in 1998. At that time, it was stated that the document would be periodically reviewed to assess its timeliness and appropriateness within 5 years. Given the wealth of clinical experience in MCS systems, a new recommendation has been drafted by consensus of a group of representatives from the medical community, academia, industry, and government. The new recommendation describes a reliability test methodology and provides detailed reliability recommendations. In addition, the new recommendation provides additional information and clinical data in appendices that are intended to assist the reliability test engineer in the development of a reliability test that is expected to give improved predictions of clinical reliability compared with past test methods. The appendices are available for download at the ASAIO journal web site at www.asaiojournal.com.

  5. Development of a Reliability Program approach to assuring operational nuclear safety

    International Nuclear Information System (INIS)

    Mueller, C.J.; Bezella, W.A.

    1985-01-01

    A Reliability Program (RP) model based on proven reliability techniques used in other high technology industries is being formulated for potential application in the nuclear power industry. Research findings are discussed. The reliability methods employed under NASA and military direction, commercial airline and related FAA programs were surveyed with several reliability concepts (e.g., quantitative reliability goals, reliability centered maintenance) appearing to be directly transferable. Other tasks in the RP development effort involved the benchmarking and evaluation of the existing nuclear regulations and practices relevant to safety/reliability integration. A review of current risk-dominant issues was also conducted using results from existing probabilistic risk assessment studies. The ongoing RP development tasks have concentrated on defining a RP for the operating phase of a nuclear plant's lifecycle. The RP approach incorporates safety systems risk/reliability analysis and performance monitoring activities with dedicated tasks that integrate these activities with operating, surveillance, and maintenance of the plant. The detection, root-cause evaluation and before-the-fact correction of incipient or actual systems failures as a mechanism for maintaining plant safety is a major objective of the RP

  6. Developing Ultra Reliable Life Support for the Moon and Mars

    Science.gov (United States)

    Jones, Harry W.

    2009-01-01

    Recycling life support systems can achieve ultra reliability by using spares to replace failed components. The added mass for spares is approximately equal to the original system mass, provided the original system reliability is not very low. Acceptable reliability can be achieved for the space shuttle and space station by preventive maintenance and by replacing failed units, However, this maintenance and repair depends on a logistics supply chain that provides the needed spares. The Mars mission must take all the needed spares at launch. The Mars mission also must achieve ultra reliability, a very low failure rate per hour, since it requires years rather than weeks and cannot be cut short if a failure occurs. Also, the Mars mission has a much higher mass launch cost per kilogram than shuttle or station. Achieving ultra reliable space life support with acceptable mass will require a well-planned and extensive development effort. Analysis must define the reliability requirement and allocate it to subsystems and components. Technologies, components, and materials must be designed and selected for high reliability. Extensive testing is needed to ascertain very low failure rates. Systems design should segregate the failure causes in the smallest, most easily replaceable parts. The systems must be designed, produced, integrated, and tested without impairing system reliability. Maintenance and failed unit replacement should not introduce any additional probability of failure. The overall system must be tested sufficiently to identify any design errors. A program to develop ultra reliable space life support systems with acceptable mass must start soon if it is to produce timely results for the moon and Mars.

  7. RIO: a program to determine reliability importance and allocate optimal reliability goals

    International Nuclear Information System (INIS)

    Poloski, J.P.

    1978-09-01

    The designer of a nuclear plant must know the plant's associated risk limitations so that he can design the plant accordingly. To design a safety system, he must understand its importance and how it relates to the overall plant risk. The computer program RIO can aid the designer to understand a system's contribution to the plant's overall risk. The methodology developed and presented was sponsored by the Nuclear Research Applications Division of the Department of Energy for use in the Gas Cooled Fast Breeder Reactor (GCFR) Program. The principal motivation behind its development was the need to translate nuclear plants safety goals into reliability goals for systems which make up that plant. The method described herein will make use of the GCFR Accident Initiation and Progression Analyses (AIPA) event trees and other models in order to determine these reliability goals

  8. An initial reliability and validity study of the Interaction, Communication, and Literacy Skills Audit.

    Science.gov (United States)

    El-Choueifati, Nisrine; Purcell, Alison; McCabe, Patricia; Heard, Robert; Munro, Natalie

    2014-06-01

    Early childhood educators (ECEs) have an important role in promoting positive outcomes for children's language and literacy development. This paper reports the development of a new tool, The Interaction Communication and Literacy (ICL) Skills Audit, and pilots its reliability and validity. Intra- and inter-rater reliability was examined by three speech-language pathologists (SLPs). Five skill areas relating to ECE language and literacy practice were rated. The face and content validity of the ICL Skills Audit was examined by expert SLPs (n = 8) and expert ECEs (n = 4) via questionnaire. The overall intra-rater reliability for the ICL Skills Audit was excellent with percentage close agreement (PCA) of 91-94. Inter-rater agreement was PCA 68-80. Expert SLPs and ECEs agreed that the content was comprehensive and practical. Based on this preliminary study, the ICL Skills Audit appears to be a promising tool that can be used by SLPs and ECEs in collaboration to measure the skills of ECEs in the areas of language and literacy support. Future psychometric and outcome research on the revised ICL Skills Audit is warranted.

  9. Development and validation of the measure of initial attraction- Short Interest Scale (MIA-I

    Directory of Open Access Journals (Sweden)

    David Rodrigues

    2015-06-01

    Full Text Available Unilateral initial attraction (UIA is a positive affective reaction following a unilateral perception of an unknown target, defining the first stage in developing a new interpersonal relationship. Although little attention is given to this construct, literature suggests it has a physiological activation component as well as an interpersonal interest component. However, this interest component emerges as necessary to willingly approach another person and eventually initiate interaction. Based on these evidences, we developed and validated the Measure of Initial Attraction - Interest Short Scale (MIA-I in a sample of Portuguese-speaking individuals (Study 1, N = 544. Results suggest the MIA-I is a valid and reliable instrument (Study 1; Study 2a, and show its capacity to discriminate UIA across different relationships (Study 1 and to differentiate UIA from passion and love (Study 1. Towards an unknown target, the MIA-I also distinguished UIA from liking (Study 2b. These results show that the MIA-I assesses a specific construct, differentiated from liking, passion and love, and suggest its importance to understand the UIA phenomenon.

  10. Spanish version of the Talent Development Environment Questionnaire for sport: Cultural adaptation and initial validation.

    Directory of Open Access Journals (Sweden)

    Javier Brazo-Sayavera

    Full Text Available This study aimed to translate the Talent Development Environment Questionnaire into Spanish and provide an initial validation. A recommended methodology for translation and cultural adaptation of questionnaires was applied. Once this had been completed, three hundred and thirty-two young athletes completed the Talent Development Environment Questionnaire. The results revealed that the five factor solution Talent Development Environment Questionnaire was confirmed. With the exclusion of one item due to low factor loading, the Talent Development Environment Questionnaire-5 had robust statistical support for its factor structure (χ2 (df = 305 = 499.64, p<0.01, CFI = 0.90, RMSEA = 0.045, SRMR = 0.055. It also demonstrated adequate convergent and discriminant validity. While the internal reliability was lower than in previous studies, it revealed acceptable levels. Specifically the overall 27 item Talent Development Environment Questionnaire-5 had a Cronbach α score of .877, and the reliability scores for individual factors 1-5 were .622; .761; .658; .605; .602 respectively. As such, it is recommended that the Spanish Talent Development Environment Questionnaire-5 can be used with confidence in Spain in both applied and research settings.

  11. ASSESSMENT OF RELIABILITY AND RISK DEGREE FOR ACCIDENT INITIATION AT SLIME STORAGES OF 4th MINING ADMINISTRATION, JSC “BELARUSKALI”

    Directory of Open Access Journals (Sweden)

    P. M. Bohaslauchyk

    2016-01-01

    Full Text Available Definition of reliability for dams of slime storage embankment is given on the basis of reliability theory and characteristics of reliability and their analysis are presented in the paper. The paper specifies qualitative indices for earth dams which are subdivided in two groups: applicability factors and structural reliability factors. A short analysis of all possible causes for accident initiation at earth dams has been made and the analysis has permitted to pinpoint eleven main objects for diagnosis for slime storage dams. In order to assess risk degree of accident initiation at JSC “Belaruskali” slime storages all possible causes of emergency cases and their probability of occurrence have been analyzed in the paper. The paper acknowledges the fact that dam malfunction is possible, as a rule, due to violation of operational rules and regulations. Main parameters of slime storage state which are to be controlled regularly in the process of its operation have been noted in the paper. Observation results over slime storages, calculations of dam slope stability for normal operation (a principal calculation case and operating irregularities in water seals (a special calculation case. As a stability margin factor is close to 1.0 for a special calculation case, an extreme position of depression curve has been determined for all design sections. It has been recommended to carry out a constant control over its position, and in the case when it reaches its peak value it is necessary to undertake appropriate measures in order to reduce its value. Final expert estimations on probability of accident initiation at the investigated slime storage dams of the 4th Mining Administration, JSC “Belaruskali” have been prepared on the basis of the analysis comprising all the required factors. A conclusion has been made about low risk degree of their destruction.

  12. Developing a reliable signal wire attachment method for rail.

    Science.gov (United States)

    2014-11-01

    The goal of this project was to develop a better attachment method for rail signal wires to improve the reliability of signaling : systems. EWI conducted basic research into the failure mode of current attachment methods and developed and tested a ne...

  13. The development of a reliable amateur boxing performance analysis template.

    Science.gov (United States)

    Thomson, Edward; Lamb, Kevin; Nicholas, Ceri

    2013-01-01

    The aim of this study was to devise a valid performance analysis system for the assessment of the movement characteristics associated with competitive amateur boxing and assess its reliability using analysts of varying experience of the sport and performance analysis. Key performance indicators to characterise the demands of an amateur contest (offensive, defensive and feinting) were developed and notated using a computerised notational analysis system. Data were subjected to intra- and inter-observer reliability assessment using median sign tests and calculating the proportion of agreement within predetermined limits of error. For all performance indicators, intra-observer reliability revealed non-significant differences between observations (P > 0.05) and high agreement was established (80-100%) regardless of whether exact or the reference value of ±1 was applied. Inter-observer reliability was less impressive for both analysts (amateur boxer and experienced analyst), with the proportion of agreement ranging from 33-100%. Nonetheless, there was no systematic bias between observations for any indicator (P > 0.05), and the proportion of agreement within the reference range (±1) was 100%. A reliable performance analysis template has been developed for the assessment of amateur boxing performance and is available for use by researchers, coaches and athletes to classify and quantify the movement characteristics of amateur boxing.

  14. Crisis Reliability Indicators Supporting Emergency Services (CRISES): A Framework for Developing Performance Measures for Behavioral Health Crisis and Psychiatric Emergency Programs.

    Science.gov (United States)

    Balfour, Margaret E; Tanner, Kathleen; Jurica, Paul J; Rhoads, Richard; Carson, Chris A

    2016-01-01

    Crisis and emergency psychiatric services are an integral part of the healthcare system, yet there are no standardized measures for programs providing these services. We developed the Crisis Reliability Indicators Supporting Emergency Services (CRISES) framework to create measures that inform internal performance improvement initiatives and allow comparison across programs. The framework consists of two components-the CRISES domains (timely, safe, accessible, least-restrictive, effective, consumer/family centered, and partnership) and the measures supporting each domain. The CRISES framework provides a foundation for development of standardized measures for the crisis field. This will become increasingly important as pay-for-performance initiatives expand with healthcare reform.

  15. Developing safety performance functions incorporating reliability-based risk measures.

    Science.gov (United States)

    Ibrahim, Shewkar El-Bassiouni; Sayed, Tarek

    2011-11-01

    Current geometric design guides provide deterministic standards where the safety margin of the design output is generally unknown and there is little knowledge of the safety implications of deviating from these standards. Several studies have advocated probabilistic geometric design where reliability analysis can be used to account for the uncertainty in the design parameters and to provide a risk measure of the implication of deviation from design standards. However, there is currently no link between measures of design reliability and the quantification of safety using collision frequency. The analysis presented in this paper attempts to bridge this gap by incorporating a reliability-based quantitative risk measure such as the probability of non-compliance (P(nc)) in safety performance functions (SPFs). Establishing this link will allow admitting reliability-based design into traditional benefit-cost analysis and should lead to a wider application of the reliability technique in road design. The present application is concerned with the design of horizontal curves, where the limit state function is defined in terms of the available (supply) and stopping (demand) sight distances. A comprehensive collision and geometric design database of two-lane rural highways is used to investigate the effect of the probability of non-compliance on safety. The reliability analysis was carried out using the First Order Reliability Method (FORM). Two Negative Binomial (NB) SPFs were developed to compare models with and without the reliability-based risk measures. It was found that models incorporating the P(nc) provided a better fit to the data set than the traditional (without risk) NB SPFs for total, injury and fatality (I+F) and property damage only (PDO) collisions. Copyright © 2011 Elsevier Ltd. All rights reserved.

  16. Development of core technology for KNGR system design; development of quantitative reliability evaluation methodologies of KNGR digital I and C components

    Energy Technology Data Exchange (ETDEWEB)

    Seong, Poong Hyun; Choi, Jong Gyun; Kim, Ung Soo; Kim, Jong Hyun; Kim, Man Cheol; Lee, Seung Jun; Lee, Young Je; Ha, Jun Soo [Korea Advanced Institute of Science and Technology, Taejeon (Korea)

    2002-03-01

    For the digital systems to be applied to the nuclear industry, which has its unique conservertive to safety, reliability assessment of digital systems is a prerequisite. But, because digital systems show different failure modes from compared to existing analog systems, the existing reliability assessment method cannot be applied to digital systems. It means that a new reliability assessment method for digital systems should be developed. The goal of this study is development of reliability assessment method for digital systems on board level and related software tool. To achieve the goal, we have conducted researches on development of a database for hardware components for digital I and C systems, development of a reliability assessment model for the reliability prediction of digital systems on board level, and the applicability to KNGR digital I and C systems. We developed a database for reliability assessment of digital hardware components, a reliability assessment method for digital systems with consideration of software and hardware together, and a software tool for the reliability assessment of digital systems, which is named as RelPredic. We plan to apply the results of this study to the reliability assessment of digital systems in KNGR digital I and C systems. 13 refs., 71 figs., 31 tabs. (Author)

  17. Use of reliability engineering in development and manufacturing of metal parts

    International Nuclear Information System (INIS)

    Khan, A.; Iqbal, M.A.; Asif, M.

    2005-01-01

    The reliability engineering predicts modes of failures and weak links before the system is built instead of failure case study. The reliability engineering analysis will help in the manufacturing economy, assembly accuracy and qualification by testing, leading to production of metal parts in an aerospace industry. This methodology will also minimize the performance constraints in any requirement for the application of metal components in aerospace systems. The reliability engineering predicts the life of the parts under loading conditions whether dynamic or static. Reliability predictions can help engineers in making decisions about design of components, materials selection and qualification under applied stress levels. Two methods of reliability prediction i.e. Part Stress Analysis and Part Count have been used in this study. In this paper we will discuss how these two methods can be used to measure reliability of a system during development phases, which includes the measuring effect of environmental and operational variables. The equations are used to measure the reliability of each type of component, as well as, integration for measuring system applied for the reliability analysis. (author)

  18. Meals in Our Household: reliability and initial validation of a questionnaire to assess child mealtime behaviors and family mealtime environments.

    Science.gov (United States)

    Anderson, Sarah E; Must, Aviva; Curtin, Carol; Bandini, Linda G

    2012-02-01

    Mealtimes in families with young children are increasingly of interest to nutrition and public health researchers, yet assessment tools are limited. Meals in Our Household is a new parent-report questionnaire that measures six domains: 1) structure of family meals, 2) problematic child mealtime behaviors, 3) use of food as reward, 4) parental concern about child diet, 5) spousal stress related to child's mealtime behavior, and 6) influence of child's food preferences on what other family members eat. Reliability and initial face, construct, and discriminant validity of the questionnaire were evaluated between January 2007 and December 2009 in two cross-sectional studies comprising a total of 305 parents of 3- to 11-year-old children (including 53 children with autism spectrum disorders). Internal consistencies (Cronbach's α) for the six domains averaged .77 across both studies. Test-retest reliability, assessed among a subsample of 44 parents who repeated the questionnaire after between 10 and 30 days, was excellent (Spearman correlations for the domain scores between two administrations ranged from 0.80 to 0.95). Initial construct validity of the instrument was supported by observation of hypothesized inter-relationships between domain scores that were of the same direction and similar magnitude in both studies. Consistent with discriminant validity, children with autism spectrum disorders had statistically significantly (Pchild mealtime behaviors, use of food as reward, parental concern about child diet, and spousal stress, as compared to typically developing children. Meals in Our Household may be a useful tool for researchers studying family mealtime environments and children's mealtime behaviors.

  19. Development of Markov model of emergency diesel generator for dynamic reliability analysis

    Energy Technology Data Exchange (ETDEWEB)

    Jin, Young Ho; Choi, Sun Yeong; Yang, Joon Eon [Korea Atomic Energy Research Institute, Taejon (Korea)

    1999-02-01

    The EDG (Emergency Diesal Generator) of nuclear power plant is one of the most important equipments in mitigating accidents. The FT (Fault Tree) method is widely used to assess the reliability of safety systems like an EDG in nuclear power plant. This method, however, has limitations in modeling dynamic features of safety systems exactly. We, hence, have developed a Markov model to represent the stochastic process of dynamic systems whose states change as time moves on. The Markov model enables us to develop a dynamic reliability model of EDG. This model can represent all possible states of EDG comparing to the FRANTIC code developed by U.S. NRC for the reliability analysis of standby systems. to access the regulation policy for test interval, we performed two simulations based on the generic data and plant specific data of YGN 3, respectively by using the developed model. We also estimate the effects of various repair rates and the fractions of starting failures by demand shock to the reliability of EDG. And finally, Aging effect is analyzed. (author). 23 refs., 19 figs., 9 tabs.

  20. Development of a Conservative Model Validation Approach for Reliable Analysis

    Science.gov (United States)

    2015-01-01

    CIE 2015 August 2-5, 2015, Boston, Massachusetts, USA [DRAFT] DETC2015-46982 DEVELOPMENT OF A CONSERVATIVE MODEL VALIDATION APPROACH FOR RELIABLE...obtain a conservative simulation model for reliable design even with limited experimental data. Very little research has taken into account the...3, the proposed conservative model validation is briefly compared to the conventional model validation approach. Section 4 describes how to account

  1. Modeling, implementation, and validation of arterial travel time reliability.

    Science.gov (United States)

    2013-11-01

    Previous research funded by Florida Department of Transportation (FDOT) developed a method for estimating : travel time reliability for arterials. This method was not initially implemented or validated using field data. This : project evaluated and r...

  2. Gearbox Reliability Collaborative Bearing Calibration

    Energy Technology Data Exchange (ETDEWEB)

    van Dam, J.

    2011-10-01

    NREL has initiated the Gearbox Reliability Collaborative (GRC) to investigate the root cause of the low wind turbine gearbox reliability. The GRC follows a multi-pronged approach based on a collaborative of manufacturers, owners, researchers and consultants. The project combines analysis, field testing, dynamometer testing, condition monitoring, and the development and population of a gearbox failure database. At the core of the project are two 750kW gearboxes that have been redesigned and rebuilt so that they are representative of the multi-megawatt gearbox topology currently used in the industry. These gearboxes are heavily instrumented and are tested in the field and on the dynamometer. This report discusses the bearing calibrations of the gearboxes.

  3. A probabilistic approach to safety/reliability of space nuclear power systems

    International Nuclear Information System (INIS)

    Medford, G.; Williams, K.; Kolaczkowski, A.

    1989-01-01

    An ongoing effort is investigating the feasibility of using probabilistic risk assessment (PRA) modeling techniques to construct a living model of a space nuclear power system. This is being done in conjunction with a traditional reliability and survivability analysis of the SP-100 space nuclear power system. The initial phase of the project consists of three major parts with the overall goal of developing a top-level system model and defining initiating events of interest for the SP-100 system. The three major tasks were performing a traditional survivability analysis, performing a simple system reliability analysis, and constructing a top-level system fault-tree model. Each of these tasks and their interim results are discussed in this paper. Initial results from the study support the conclusion that PRA modeling techniques can provide a valuable design and decision-making tool for space reactors. The ability of the model to rank and calculate relative contributions from various failure modes allows design optimization for maximum safety and reliability. Future efforts in the SP-100 program will see data development and quantification of the model to allow parametric evaluations of the SP-100 system. Current efforts have shown the need for formal data development and test programs within such a modeling framework

  4. Development of the software for the component reliability database system of Korean nuclear power plants

    Energy Technology Data Exchange (ETDEWEB)

    Han, Sang Hoon; Kim, Seung Hwan; Choi, Sun Young [Korea Atomic Energy Research Institute, Taejeon (Korea)

    2002-03-01

    A study was performed to develop the system for the component reliability database which consists of database system to store the reliability data and softwares to analyze the reliability data.This system is a part of KIND (Korea Information System for Nuclear Reliability Database).The MS-SQL database is used to stores the component population data, component maintenance history, and the results of reliability analysis. Two softwares were developed for the component reliability system. One is the KIND-InfoView for the data storing, retrieving and searching. The other is the KIND-CompRel for the statistical analysis of component reliability. 4 refs., 13 figs., 7 tabs. (Author)

  5. The Comprehensive Snack Parenting Questionnaire (CSPQ: Development and Test-Retest Reliability

    Directory of Open Access Journals (Sweden)

    Dorus W. M. Gevers

    2018-04-01

    Full Text Available The narrow focus of existing food parenting instruments led us to develop a food parenting practices instrument measuring the full range of food practices constructs with a focus on snacking behavior. We present the development of the questionnaire and our research on the test-retest reliability. The developed Comprehensive Snack Parenting Questionnaire (CSPQ covers 21 constructs. Test-retest reliability was assessed by calculating intra class correlation coefficients and percentage agreement after two administrations of the CSPQ among a sample of 66 Dutch parents. Test-retest reliability analysis revealed acceptable intra class correlation coefficients (≥0.41 or agreement scores (≥0.60 for all items. These results, together with earlier work, suggest sufficient psychometric characteristics. The comprehensive, but brief CSPQ opens up chances for highly essential but unstudied research questions to understand and predict children’s snack intake. Example applications include studying the interactional nature of food parenting practices or interactions of food parenting with general parenting or child characteristics.

  6. Development of reliability and probabilistic safety assessment program RiskA

    International Nuclear Information System (INIS)

    Wu, Yican

    2015-01-01

    Highlights: • There are four parts in the structure of RiskA. User input part lets users input the PSA model and some necessary data by GUI or model transformation tool. In calculation engine part, fault tree analysis, event tree analysis, uncertainty analysis, sensitivity analysis, importance analysis and failure mode and effects analysis are supplied. User output part outputs the analysis results, user customized reports and some other data. The last part includes reliability database, some other common tools and help documents. • RiskA has several advanced features. Extensible framework makes it easy to add any new functions, making RiskA to be a large platform of reliability and probabilistic safety assessment. It is very fast to analysis fault tree in RiskA because many advanced algorithm improvement were made. Many model formats can be imported and exported, which made the PSA model in the commercial software can be easily transformed to adapt RiskA platform. Web-based co-modeling let several users in different places work together whenever they are online. • The comparison between RiskA and other mature PSA codes (e.g. CAFTA, RiskSpectrum, XFTA) has demonstrated that the calculation and analysis of RiskA is correct and efficient. Based on the development of this code package, many applications of safety and reliability analysis of some research reactors and nuclear power plants were performed. The development of RiskA appears to be of realistic and potential value for academic research and practical operation safety management of nuclear power plants in China and abroad. - Abstract: PSA (probabilistic safety assessment) software, the indispensable tool in nuclear safety assessment, has been widely used. An integrated reliability and PSA program named RiskA has been developed by FDS Team. RiskA supplies several standard PSA modules including fault tree analysis, event tree analysis, uncertainty analysis, failure mode and effect analysis and reliability

  7. Systems reliability analysis for the national ignition facility

    International Nuclear Information System (INIS)

    Majumdar, K.C.; Annese, C.E.; MacIntyre, A.T.; Sicherman, A.

    1996-01-01

    A Reliability, Availability and Maintainability (RAM) analysis was initiated for the National Ignition Facility (NIF). The NIF is an inertial confinement fusion research facility designed to achieve controlled thermonuclear reaction; the preferred site for the NIF is the Lawrence Livermore National Laboratory (LLNL). The NIF RAM analysis has three purposes: (1) to allocate top level reliability and availability goals for the systems, (2) to develop an operability model for optimum maintainability, and (3) to determine the achievability of the allocated goals of the RAM parameters for the NIF systems and the facility operation as a whole. An allocation model assigns the reliability and availability goals for front line and support systems by a top-down approach; reliability analysis uses a bottom-up approach to determine the system reliability and availability from component level to system level

  8. The Persian version of auditory word discrimination test (P-AWDT) for children: Development, validity, and reliability.

    Science.gov (United States)

    Hashemi, Nassim; Ghorbani, Ali; Soleymani, Zahra; Kamali, Mohmmad; Ahmadi, Zohreh Ziatabar; Mahmoudian, Saeid

    2018-07-01

    Auditory discrimination of speech sounds is an important perceptual ability and a precursor to the acquisition of language. Auditory information is at least partially necessary for the acquisition and organization of phonological rules. There are few standardized behavioral tests to evaluate phonemic distinctive features in children with or without speech and language disorders. The main objective of the present study was the development, validity, and reliability of the Persian version of auditory word discrimination test (P-AWDT) for 4-8-year-old children. A total of 120 typical children and 40 children with speech sound disorder (SSD) participated in the present study. The test comprised of 160 monosyllabic paired-words distributed in the Forms A-1 and the Form A-2 for the initial consonants (80 words) and the Forms B-1 and the Form B-2 for the final consonants (80 words). Moreover, the discrimination of vowels was randomly included in all forms. Content validity was calculated and 50 children repeated the test twice with two weeks of interval (test-retest reliability). Further analysis was also implemented including validity, intraclass correlation coefficient (ICC), Cronbach's alpha (internal consistency), age groups, and gender. The content validity index (CVI) and the test-retest reliability of the P-AWDT were achieved 63%-86% and 81%-96%, respectively. Moreover, the total Cronbach's alpha for the internal consistency was estimated relatively high (0.93). Comparison of the mean scores of the P-AWDT in the typical children and the children with SSD revealed a significant difference. The results revealed that the group with SSD had greater severity of deficit than the typical group in auditory word discrimination. In addition, the difference between the age groups was statistically significant, especially in 4-4.11-year-old children. The performance of the two gender groups was relatively same. The comparison of the P-AWDT scores between the typical children

  9. Reliability analysis techniques for the design engineer

    International Nuclear Information System (INIS)

    Corran, E.R.; Witt, H.H.

    1982-01-01

    This paper describes a fault tree analysis package that eliminates most of the housekeeping tasks involved in proceeding from the initial construction of a fault tree to the final stage of presenting a reliability analysis in a safety report. It is suitable for designers with relatively little training in reliability analysis and computer operation. Users can rapidly investigate the reliability implications of various options at the design stage and evolve a system which meets specified reliability objectives. Later independent review is thus unlikely to reveal major shortcomings necessitating modification and project delays. The package operates interactively, allowing the user to concentrate on the creative task of developing the system fault tree, which may be modified and displayed graphically. For preliminary analysis, system data can be derived automatically from a generic data bank. As the analysis proceeds, improved estimates of critical failure rates and test and maintenance schedules can be inserted. The technique is applied to the reliability analysis of the recently upgraded HIFAR Containment Isolation System. (author)

  10. The development on the methodology of the initiating event frequencies for liquid metal reactor KALIMER

    International Nuclear Information System (INIS)

    Jeong, K. S.; Yang, Z. A.; Ah, Y. B.; Jang, W. P.; Jeong, H. Y.; Ha, K. S.; Han, D. H.

    2002-01-01

    In this paper, the PSA methodology of PRISM,Light Water Reactor, Pressurized Heavy Water Reactor are analyzed and the methodology of Initiating Events for KALIMER are suggested. Also,the reliability assessment of assumptions for Pipes Corrosion Frequency is set up. The reliability assessment of Passive Safety System, one of Main Safety System of KALIMER, are discussed and analyzed

  11. The development and initial assessment of the strategy and leadership systems capability evaluation survey.

    Science.gov (United States)

    Coon, Cheryl D; Bokowy, Kay L; Horblyuk, Ruslan; Zisman, Robert S; McLeod, Lori D; Brown, T Michelle

    2012-01-01

    Hospital management and leadership systems are associated with organizational success and quality care. The Strategy and Leadership Systems Capability Evaluation (CE) survey was developed by GE Healthcare to assess management and leadership systems at health care institutions, serve as a benchmark for improvement, and measure progress. To assess the psychometric properties of the 29-item CE survey, including the factor structure, scoring algorithm, reliability, and discriminant validity, an online survey was completed by 3450 employees at 15 US hospitals. Of these employees, 609 worked at a hospital where a leadership and management intervention occurred after the initial survey administration. Data were also collected on job level, number of hospital beds, hospital ownership, location, community type, and the implementation of hospital interventions. Item response frequencies showed no floor or ceiling effects and limited missing data. Interitem correlations were strong without obvious redundancies, and factor analysis suggested a unidimensional scale. The resulting scale had strong internal consistency and was able to discriminate among known groups. The CE survey was developed to evaluate management and leadership systems at health care institutions. This study provides psychometric evidence in support of the reliability, validity, and scoring structure of this survey.

  12. Student Practice Evaluation Form-Revised Edition online comment bank: development and reliability analysis.

    Science.gov (United States)

    Rodger, Sylvia; Turpin, Merrill; Copley, Jodie; Coleman, Allison; Chien, Chi-Wen; Caine, Anne-Maree; Brown, Ted

    2014-08-01

    The reliable evaluation of occupational therapy students completing practice education placements along with provision of appropriate feedback is critical for both students and for universities from a quality assurance perspective. This study describes the development of a comment bank for use with an online version of the Student Practice Evaluation Form-Revised Edition (SPEF-R Online) and investigates its reliability. A preliminary bank of 109 individual comments (based on previous students' placement performance) was developed via five stages. These comments reflected all 11 SPEF-R domains. A purpose-designed online survey was used to examine the reliability of the comment bank. A total of 37 practice educators returned surveys, 31 of which were fully completed. Participants were asked to rate each individual comment using the five-point SPEF-R rating scale. One hundred and two of 109 comments demonstrated satisfactory agreement with their respective default ratings that were determined by the development team. At each domain level, the intra-class correlation coefficients (ranging between 0.86 and 0.96) also demonstrated good to excellent inter-rater reliability. There were only seven items that required rewording prior to inclusion in the final SPEF-R Online comment bank. The development of the SPEF-R Online comment bank offers a source of reliable comments (consistent with the SPEF-R rating scale across different domains) and aims to assist practice educators in providing reliable and timely feedback to students in a user-friendly manner. © 2014 Occupational Therapy Australia.

  13. Transparent reliability model for fault-tolerant safety systems

    International Nuclear Information System (INIS)

    Bodsberg, Lars; Hokstad, Per

    1997-01-01

    A reliability model is presented which may serve as a tool for identification of cost-effective configurations and operating philosophies of computer-based process safety systems. The main merit of the model is the explicit relationship in the mathematical formulas between failure cause and the means used to improve system reliability such as self-test, redundancy, preventive maintenance and corrective maintenance. A component failure taxonomy has been developed which allows the analyst to treat hardware failures, human failures, and software failures of automatic systems in an integrated manner. Furthermore, the taxonomy distinguishes between failures due to excessive environmental stresses and failures initiated by humans during engineering and operation. Attention has been given to develop a transparent model which provides predictions which are in good agreement with observed system performance, and which is applicable for non-experts in the field of reliability

  14. Damage tolerance reliability analysis of automotive spot-welded joints

    International Nuclear Information System (INIS)

    Mahadevan, Sankaran; Ni Kan

    2003-01-01

    This paper develops a damage tolerance reliability analysis methodology for automotive spot-welded joints under multi-axial and variable amplitude loading history. The total fatigue life of a spot weld is divided into two parts, crack initiation and crack propagation. The multi-axial loading history is obtained from transient response finite element analysis of a vehicle model. A three-dimensional finite element model of a simplified joint with four spot welds is developed for static stress/strain analysis. A probabilistic Miner's rule is combined with a randomized strain-life curve family and the stress/strain analysis result to develop a strain-based probabilistic fatigue crack initiation life prediction for spot welds. Afterwards, the fatigue crack inside the base material sheet is modeled as a surface crack. Then a probabilistic crack growth model is combined with the stress analysis result to develop a probabilistic fatigue crack growth life prediction for spot welds. Both methods are implemented with MSC/NASTRAN and MSC/FATIGUE software, and are useful for reliability assessment of automotive spot-welded joints against fatigue and fracture

  15. Developing MESA : an accelerated reliability test

    NARCIS (Netherlands)

    Baskoro, G.; Rouvroye, J.L.; Bacher, W.; Brombacher, A.C.

    2003-01-01

    This paper describes the on-going research on an accelerated reliability test strategy called MESA (Multiple Environment Stress Analysis) intended to find in a fast and efficient manner (potential) reliability problems during the design phase of high volume consumer products. This test has shown

  16. Development in structural systems reliability theory

    Energy Technology Data Exchange (ETDEWEB)

    Murotsu, Y

    1986-07-01

    This paper is concerned with two topics on structural systems reliability theory. One covers automatic generation of failure mode equations, identifications of stochastically dominant failure modes, and reliability assessment of redundant structures. Reduced stiffness matrixes and equivalent nodal forces representing the failed elements are introduced for expressing the safety of the elements, using a matrix method. Dominant failure modes are systematically selected by a branch-and-bound technique and heuristic operations. The other discusses the various optimum design problems based on reliability concept. Those problems are interpreted through a solution to a multi-objective optimization problem.

  17. Development in structural systems reliability theory

    International Nuclear Information System (INIS)

    Murotsu, Y.

    1986-01-01

    This paper is concerned with two topics on structural systems reliability theory. One covers automatic generation of failure mode equations, identifications of stochastically dominant failure modes, and reliability assessment of redundant structures. Reduced stiffness matrixes and equivalent nodal forces representing the failed elements are introduced for expressing the safety of the elements, using a matrix method. Dominant failure modes are systematically selected by a branch-and-bound technique and heuristic operations. The other discusses the various optimum design problems based on reliability concept. Those problems are interpreted through a solution to a multi-objective optimization problem. (orig.)

  18. Development of web-based reliability data analysis algorithm model and its application

    International Nuclear Information System (INIS)

    Hwang, Seok-Won; Oh, Ji-Yong; Moosung-Jae

    2010-01-01

    For this study, a database model of plant reliability was developed for the effective acquisition and management of plant-specific data that can be used in various applications of plant programs as well as in Probabilistic Safety Assessment (PSA). Through the development of a web-based reliability data analysis algorithm, this approach systematically gathers specific plant data such as component failure history, maintenance history, and shift diary. First, for the application of the developed algorithm, this study reestablished the raw data types, data deposition procedures and features of the Enterprise Resource Planning (ERP) system process. The component codes and system codes were standardized to make statistical analysis between different types of plants possible. This standardization contributes to the establishment of a flexible database model that allows the customization of reliability data for the various applications depending on component types and systems. In addition, this approach makes it possible for users to perform trend analyses and data comparisons for the significant plant components and systems. The validation of the algorithm is performed through a comparison of the importance measure value (Fussel-Vesely) of the mathematical calculation and that of the algorithm application. The development of a reliability database algorithm is one of the best approaches for providing systemic management of plant-specific reliability data with transparency and continuity. This proposed algorithm reinforces the relationships between raw data and application results so that it can provide a comprehensive database that offers everything from basic plant-related data to final customized data.

  19. Development of web-based reliability data analysis algorithm model and its application

    Energy Technology Data Exchange (ETDEWEB)

    Hwang, Seok-Won, E-mail: swhwang@khnp.co.k [Korea Hydro and Nuclear Power Co. Ltd., Jang-Dong 25-1, Yuseong-Gu, 305-343 Daejeon (Korea, Republic of); Oh, Ji-Yong [Korea Hydro and Nuclear Power Co. Ltd., Jang-Dong 25-1, Yuseong-Gu, 305-343 Daejeon (Korea, Republic of); Moosung-Jae [Department of Nuclear Engineering Hanyang University 17 Haengdang, Sungdong, Seoul (Korea, Republic of)

    2010-02-15

    For this study, a database model of plant reliability was developed for the effective acquisition and management of plant-specific data that can be used in various applications of plant programs as well as in Probabilistic Safety Assessment (PSA). Through the development of a web-based reliability data analysis algorithm, this approach systematically gathers specific plant data such as component failure history, maintenance history, and shift diary. First, for the application of the developed algorithm, this study reestablished the raw data types, data deposition procedures and features of the Enterprise Resource Planning (ERP) system process. The component codes and system codes were standardized to make statistical analysis between different types of plants possible. This standardization contributes to the establishment of a flexible database model that allows the customization of reliability data for the various applications depending on component types and systems. In addition, this approach makes it possible for users to perform trend analyses and data comparisons for the significant plant components and systems. The validation of the algorithm is performed through a comparison of the importance measure value (Fussel-Vesely) of the mathematical calculation and that of the algorithm application. The development of a reliability database algorithm is one of the best approaches for providing systemic management of plant-specific reliability data with transparency and continuity. This proposed algorithm reinforces the relationships between raw data and application results so that it can provide a comprehensive database that offers everything from basic plant-related data to final customized data.

  20. Reliability and maintainability data acquisition in equipment development tests

    International Nuclear Information System (INIS)

    Haire, M.J.; Gift, E.H.

    1983-10-01

    The need for collection of reliability, maintainability, and availability data adds a new dimension to the data acquisition requirements of equipment development tests. This report describes the reliability and maintainability data that are considered necessary to ensure that sufficient and high quality data exist for a comprehensive, quantitative evaluation of equipment and system availability. These necessary data are presented as a set of data collection forms. Three data acquisition forms are discussed: an inventory and technical data form, which is filed by the design engineer when the design is finished or the equipment is received; an event report form, which is completed by the senior test operator at each shutdown; and a maintainability report, which is a collaborative effort between senior operators and lead engineers and is completed on restart. In addition, elements of a reliability, maintainability evaluation program are described. Emphasis is placed on the role of data, its storage, and use in such a program

  1. Stand development and reliability tests of the thermal monitoring means for NPP

    International Nuclear Information System (INIS)

    Nalivaev, V.I.; Nikul'shin, V.S.; Kichigin, A.B.; Dirin, V.F.

    2003-01-01

    The paper is devoted to the reliability tests of thermoelectric thermometers and resistance thermometers during their operation in the nominal mode. Five stands Reliability are developed and operate for realization of tests of all manufactured thermal converters. delivered at NPP. Description of all stands are presented [ru

  2. Reliability Engineering

    International Nuclear Information System (INIS)

    Lee, Sang Yong

    1992-07-01

    This book is about reliability engineering, which describes definition and importance of reliability, development of reliability engineering, failure rate and failure probability density function about types of it, CFR and index distribution, IFR and normal distribution and Weibull distribution, maintainability and movability, reliability test and reliability assumption in index distribution type, normal distribution type and Weibull distribution type, reliability sampling test, reliability of system, design of reliability and functionality failure analysis by FTA.

  3. Leadership in organizations with high security and reliability requirements

    International Nuclear Information System (INIS)

    Gonzalez, F.

    2013-01-01

    Developing leadership skills in organizations is the key to ensure the sustainability of excellent results in industries with high requirements safety and reliability. In order to have a model of leadership development specific to this type of organizations, Tecnatom in 2011, we initiated a project internal, to find and adapt a competency model to these requirements.

  4. Development of Tsunami Trace Database with reliability evaluation on Japan coasts

    International Nuclear Information System (INIS)

    Iwabuchi, Yoko; Sugino, Hideharu; Imamura, Fumihiko; Imai, Kentaro; Tsuji, Yoshinobu; Matsuoka, Yuya; Shuto, Nobuo

    2012-01-01

    The purpose of this research is to develop a Tsunami Trace Database by collecting historical materials as well as documents concerning tsunamis which had hit Japan and, of which the reliability of tsunami run-up and related data is taken into account. Based on acquisition and surveying of references, tsunami trace data over past 400 years of Japan has collected into a database, and reliability of each trace data was evaluated according to categorization of Japan Society of Civil Engineers (2002). As a result, trace data can now be searched and filtered with reliability levels accordingly whilst utilizing it for verification of tsunami numerical analysis and estimation of tsunami sources. By analyzing this database, we have quantitatively revealed the fact that the amount of reliable data tends to diminish as it goes older. (author)

  5. Affordances in the home environment for motor development: Validity and reliability for the use in daycare setting.

    Science.gov (United States)

    Müller, Alessandra Bombarda; Valentini, Nadia Cristina; Bandeira, Paulo Felipe Ribeiro

    2017-05-01

    The range of stimuli provided by physical space, toys and care practices contributes to the motor, cognitive and social development of children. However, assessing the quality of child education environments is a challenge, and can be considered a health promotion initiative. This study investigated the validity of the criterion, content, construct and reliability of the Affordances in the Home Environment for Motor Development - Infant Scale (AHEMD-IS), version 3-18 months, for the use in daycare settings. Content validation was conducted with the participation of seven motor development and health care experts; and, face validity by 20 specialists in health and education. The results indicate the suitability of the adapted AHEMD-IS, evidencing its validity for the daycare setting a potential tool to assess the opportunities that the collective context offers to child development. Copyright © 2017 Elsevier Inc. All rights reserved.

  6. 75 FR 40819 - Reliability Standards Development and NERC and Regional Entity Enforcement; Notice Soliciting...

    Science.gov (United States)

    2010-07-14

    ... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Docket No. AD10-14-000] Reliability Standards Development and NERC and Regional Entity Enforcement; Notice Soliciting Comments July 7, 2010... technical conference to explore issues pertaining to the development of mandatory Reliability Standards for...

  7. Reliability database development and plant performance improvement effort at Korea Hydro and Nuclear Power Co

    International Nuclear Information System (INIS)

    Oh, S. J.; Hwang, S. W.; Na, J. H.; Lim, H. S.

    2008-01-01

    Nuclear utilities in recent years have focused on improved plant performance and equipment reliability. In U.S., there is a movement toward process integration. Examples are INPO AP-913 equipment reliability program and the standard nuclear performance model developed by NEI. Synergistic effect from an integrated approach can be far greater than as compared to individual effects from each program. In Korea, PSA for all Korean NPPs (Nuclear Power Plants) has been completed. Plant performance monitoring and improvement is an important goal for KHNP (Korea Hydro and Nuclear Power Company) and a risk monitoring system called RIMS has been developed for all nuclear plants. KHNP is in the process of voluntarily implementing maintenance rule program similar to that in U.S. In the future, KHNP would like to expand the effort to equipment reliability program and to achieve highest equipment reliability and improved plant performance. For improving equipment reliability, the current trend is moving toward preventive/predictive maintenance from corrective maintenance. With the emphasis on preventive maintenance, the failure cause and operation history and environment are important. Hence, the development of accurate reliability database is necessary. Furthermore, the database should be updated regularly and maintained as a living program to reflect the current status of equipment reliability. This paper examines the development of reliability database system and its application of maintenance optimization or Risk Informed Application (RIA). (authors)

  8. MEASURING COERCION TO PARTICIPATE IN RESEARCH WITHIN A DOUBLY VULNERABLE POPULATION: INITIAL DEVELOPMENT OF THE COERCION ASSESSMENT SCALE

    Science.gov (United States)

    Dugosh, Karen Leggett; Festinger, David S.; Croft, Jason R.; Marlowe, Douglas B.

    2011-01-01

    Despite many efforts aimed to ensure that research participation is autonomous and not coerced, there exists no reliable and valid measure of perceived coercion for the doubly vulnerable population of substance-abusing offenders. The current study describes the development and initial validation of an instrument measuring perceived coercion to participate in research among substance-abusing offenders. The results indicated that a substantial number of individuals report feeling coerced to participate in the study. In addition, the instrument has adequate levels of internal consistency, a one-dimensional factor structure, and evidence of discriminative validity. This study provides initial support for the instrument’s validity and clinical utility. PMID:20235867

  9. Development of seismic technology and reliability based on vibration tests

    International Nuclear Information System (INIS)

    Sasaki, Youichi

    1997-01-01

    This paper deals with some of the vibration tests and investigations on the seismic safety of nuclear power plants (NPPs) in Japan. To ensure the reliability of the seismic safety of nuclear power plants, nuclear power plants in Japan have been designed according to the Technical Guidelines for Aseismic Design of Nuclear Power Plants. This guideline has been developed based on technical date base and findings which were obtained from many vibration tests and investigations. Besides the tests for the guideline, proving tests on seismic reliability of operating nuclear power plants equipment and systems have been carried out. In this paper some vibration tests and their evaluation results are presented. They have crucially contributed to develop the guideline. (J.P.N.)

  10. Development of seismic technology and reliability based on vibration tests

    Energy Technology Data Exchange (ETDEWEB)

    Sasaki, Youichi [Nuclear Power Engineering Corp., Tokyo (Japan)

    1997-03-01

    This paper deals with some of the vibration tests and investigations on the seismic safety of nuclear power plants (NPPs) in Japan. To ensure the reliability of the seismic safety of nuclear power plants, nuclear power plants in Japan have been designed according to the Technical Guidelines for Aseismic Design of Nuclear Power Plants. This guideline has been developed based on technical date base and findings which were obtained from many vibration tests and investigations. Besides the tests for the guideline, proving tests on seismic reliability of operating nuclear power plants equipment and systems have been carried out. In this paper some vibration tests and their evaluation results are presented. They have crucially contributed to develop the guideline. (J.P.N.)

  11. Operational safety system reliability. Progress report, November 15, 1975--May 14, 1976

    International Nuclear Information System (INIS)

    Hockenbury, R.W.; Yeater, M.L.

    1976-05-01

    The report describes the objectives and present status of a study concerning the operational reliability of nuclear power plants. The purpose of the study is to develop utilitarian models for use with the Liquid-Metal-Cooled Fast Breeder Reactor; initial testing of the formalism can be carried out with LWR operational data. Methods are being directed towards (1) day-to-day operation of the nuclear plant protection system and (2) to better understand the protection system sensor characteristics in order to anticipate off-normal conditions. The initial models now underway are based on moment-matching, confidence bounding, and convolution methods in the case of the protection system reliability, and for the sensor response function, a convolution of component reliability probability distributions and noise signatures

  12. Development of high-reliability control system for nuclear power plants

    International Nuclear Information System (INIS)

    Asami, K.; Yanai, K.; Hirose, H.; Ito, T.

    1983-01-01

    In Japan, many nuclear power generating plants are in operation and under construction. There is a general awareness of the problems in connection with nuclear power generation and strong emphasis is put on achieving highly reliable operation of nuclear power plants. Hitachi has developed a new high-reliability control system. NURECS-3000 (NUclear Power Plant High-REliability Control System), which is applied to the main control systems, such as the reactor feedwater control system, the reactor recirculation control system and the main turbine control system. The NURECS-3000 system was designed taking into account the fact that there will be failures, but the aim is for the system to continue to function correctly; it is therefore a fault-tolerant system. It has redundant components which can be completely isolated from each other in order to prevent fault propagation. The system has a hierarchical configuration, with a main controller, consisting of a triplex microcomputer system, and sub-loop controllers. Special care was taken to ensure the independence of these subsystems. Since most of the redundant system failures are caused by common-mode failures and the reliability of redundant systems depends on the reliability of the common-mode parts, the aim was to minimize these parts. (author)

  13. A RELIABILITY TEST USED FOR THE DEVELOPMENT OF A LOYALTY SCALE

    Directory of Open Access Journals (Sweden)

    Florin-Alexandru LUCA

    2017-06-01

    Full Text Available The development of a loyalty model involves the construction of a proper research instrument. For the loyalty model of the clients for financial services, the pre-testing of the research questionnaire represents a significant stage. This article presents the methodology used in this stage for testing the reliability of a loyalty scale. Firstly, this implies choosing the appropriate scales for each variable included in the suggested research model. Secondly, the internal consistency for each of these scales is measured as an indicator of their reliability. The reliability analysis described represents an essential stage in building a measurement instrument for a loyalty model.

  14. Spanish version of the Talent Development Environment Questionnaire for sport: Cultural adaptation and initial validation

    Science.gov (United States)

    Olivares, Pedro R.; Andronikos, Georgios; Martindale, Russell J. J.

    2017-01-01

    This study aimed to translate the Talent Development Environment Questionnaire into Spanish and provide an initial validation. A recommended methodology for translation and cultural adaptation of questionnaires was applied. Once this had been completed, three hundred and thirty-two young athletes completed the Talent Development Environment Questionnaire. The results revealed that the five factor solution Talent Development Environment Questionnaire was confirmed. With the exclusion of one item due to low factor loading, the Talent Development Environment Questionnaire-5 had robust statistical support for its factor structure (χ2 (df = 305) = 499.64, pTalent Development Environment Questionnaire-5 had a Cronbach α score of .877, and the reliability scores for individual factors 1–5 were .622; .761; .658; .605; .602 respectively. As such, it is recommended that the Spanish Talent Development Environment Questionnaire-5 can be used with confidence in Spain in both applied and research settings. PMID:28582387

  15. Spanish version of the Talent Development Environment Questionnaire for sport: Cultural adaptation and initial validation.

    Science.gov (United States)

    Brazo-Sayavera, Javier; Olivares, Pedro R; Andronikos, Georgios; Martindale, Russell J J

    2017-01-01

    This study aimed to translate the Talent Development Environment Questionnaire into Spanish and provide an initial validation. A recommended methodology for translation and cultural adaptation of questionnaires was applied. Once this had been completed, three hundred and thirty-two young athletes completed the Talent Development Environment Questionnaire. The results revealed that the five factor solution Talent Development Environment Questionnaire was confirmed. With the exclusion of one item due to low factor loading, the Talent Development Environment Questionnaire-5 had robust statistical support for its factor structure (χ2 (df = 305) = 499.64, pTalent Development Environment Questionnaire-5 had a Cronbach α score of .877, and the reliability scores for individual factors 1-5 were .622; .761; .658; .605; .602 respectively. As such, it is recommended that the Spanish Talent Development Environment Questionnaire-5 can be used with confidence in Spain in both applied and research settings.

  16. Performance and Reliability of Wind Turbines: A Review

    Directory of Open Access Journals (Sweden)

    Sebastian Pfaffel

    2017-11-01

    Full Text Available Performance (availability and yield and reliability of wind turbines can make the difference between success and failure of wind farm projects and these factors are vital to decrease the cost of energy. During the last years, several initiatives started to gather data on the performance and reliability of wind turbines on- and offshore and published findings in different journals and conferences. Even though the scopes of the different initiatives are similar, every initiative follows a different approach and results are therefore difficult to compare. The present paper faces this issue, collects results of different initiatives and harmonizes the results. A short description and assessment of every considered data source is provided. To enable this comparison, the existing reliability characteristics are mapped to a system structure according to the Reference Designation System for Power Plants (RDS-PP®. The review shows a wide variation in the performance and reliability metrics of the individual initiatives. Especially the comparison on onshore wind turbines reveals significant differences between the results. Only a few publications are available on offshore wind turbines and the results show an increasing performance and reliability of offshore wind turbines since the first offshore wind farms were erected and monitored.

  17. Reliability data banks

    International Nuclear Information System (INIS)

    Cannon, A.G.; Bendell, A.

    1991-01-01

    Following an introductory chapter on Reliability, what is it, why it is needed, how it is achieved and measured, the principles of reliability data bases and analysis methodologies are the subject of the next two chapters. Achievements due to the development of data banks are mentioned for different industries in the next chapter, FACTS, a comprehensive information system for industrial safety and reliability data collection in process plants are covered next. CREDO, the Central Reliability Data Organization is described in the next chapter and is indexed separately, as is the chapter on DANTE, the fabrication reliability Data analysis system. Reliability data banks at Electricite de France and IAEA's experience in compiling a generic component reliability data base are also separately indexed. The European reliability data system, ERDS, and the development of a large data bank come next. The last three chapters look at 'Reliability data banks, - friend foe or a waste of time'? and future developments. (UK)

  18. Development and initial validation of the internalization of Asian American stereotypes scale.

    Science.gov (United States)

    Shen, Frances C; Wang, Yu-Wei; Swanson, Jane L

    2011-07-01

    This research consists of four studies on the initial reliability and validity of the Internalization of Asian American Stereotypes Scale (IAASS), a self-report instrument that measures the degree Asian Americans have internalized racial stereotypes about their own group. The results from the exploratory and confirmatory factor analyses support a stable four-factor structure of the IAASS: Difficulties with English Language Communication, Pursuit of Prestigious Careers, Emotional Reservation, and Expected Academic Success. Evidence for concurrent and discriminant validity is presented. High internal-consistency and test-retest reliability estimates are reported. A discussion of how this scale can contribute to research and practice regarding internalized stereotyping among Asian Americans is provided.

  19. Maynard Smith: amplifying the reasons for signal reliability.

    Science.gov (United States)

    Harper, D G C

    2006-03-21

    One of the many questions to which John Maynard Smith contributed was that of why most animal signals are reliable. He initially rejected the "handicap" argument but gradually accepted it, a process I briefly describe. This episode illustrated his preference for mathematical models over verbal ones, and the generosity with which he could change his mind. Even after accepting that some signals are reliable because of their strategic costs, he argued for a pluralistic approach to signal reliability. Signal complexity was a developing interest when he died. Signals usually involve several components, some of which appear to amplify other signal components. The terms "amplifier" and "index" require more thought to reduce the scope for semantic confusion. I conclude by describing Maynard Smith's fascination with peacocks Pavo cristatus.

  20. European Reliability Data System: main developments and use

    International Nuclear Information System (INIS)

    Amesz, J.; Capobianchi, S.; Kalfsbeek, H.W.; Mancini, G.

    1985-01-01

    The paper revises the aims and objectives of the European Reliability Data System (ERDS), a centralized system collecting and organizing information related to the operation of light water reactors. The paper first describes the recent developments of the four data banks constituting the system: Component Event Data Bank, Abnormal Occurrences Reporting System, Operating Unit Status Report and Reliability Parameters Data Bank. Then several issues are discussed referring mostly to the status of classification schemes and their use, to the operation of the banks (data input and transcoding) and to the retrieval and utilization of the information; in this latter case particularly the analysis potential of the data collection scheme of the AORS (Abnormal Occurrences Reporting System) is demonstrated. Finally, emphasis is given to the increasing role which artificial intelligence techniques such as natural language and expert systems and fuzzy logic may play in improving the future capabilities of the system

  1. Engineering, maintenance, and initiatives to improve LAMPF beam availability and system reliability

    International Nuclear Information System (INIS)

    Harris, H.W.; DeHaven, R.A.; Hart, V.E.; Parsons, W.M.; Sturrock, J.C.

    1992-01-01

    Two different requirements are driving engineering studies and hardware development to improve LAMPF. The first is concerned with component and system improvements to increase beam availability during the LAMPF production cycle. Hardware changes in RF, power supplies, and magnets are being implemented to increase mean time between failure and reduce time to replace or repair failed units. A joint LAMPF-Industry project is on-going to improve reliability of RF components. A component test stand is being refurbished to include significant development capability. The second approach includes several changes that will increase the duty factor of the existing accelerator. Major changes are being evaluated for replacing the front end of the accelerator. Other changes improving the high brightness capability could result in a new performance plateau for LAMPF. 2 refs., 2 figs

  2. Reliability database development for use with an object-oriented fault tree evaluation program

    Science.gov (United States)

    Heger, A. Sharif; Harringtton, Robert J.; Koen, Billy V.; Patterson-Hine, F. Ann

    1989-01-01

    A description is given of the development of a fault-tree analysis method using object-oriented programming. In addition, the authors discuss the programs that have been developed or are under development to connect a fault-tree analysis routine to a reliability database. To assess the performance of the routines, a relational database simulating one of the nuclear power industry databases has been constructed. For a realistic assessment of the results of this project, the use of one of existing nuclear power reliability databases is planned.

  3. Development of reliability-based load and resistance factor design methods for piping

    International Nuclear Information System (INIS)

    Ayyub, Bilal M.; Hill, Ralph S. III; Balkey, Kenneth R.

    2003-01-01

    Current American Society of Mechanical Engineers (ASME) nuclear codes and standards rely primarily on deterministic and mechanistic approaches to design. The American Institute of Steel Construction and the American Concrete Institute, among other organizations, have incorporated probabilistic methodologies into their design codes. ASME nuclear codes and standards could benefit from developing a probabilistic, reliability-based, design methodology. This paper provides a plan to develop the technical basis for reliability-based, load and resistance factor design of ASME Section III, Class 2/3 piping for primary loading, i.e., pressure, deadweight and seismic. The plan provides a proof of concept in that LRFD can be used in the design of piping, and could achieve consistent reliability levels. Also, the results from future projects in this area could form the basis for code cases, and additional research for piping secondary loads. (author)

  4. Seeking high reliability in primary care: Leadership, tools, and organization.

    Science.gov (United States)

    Weaver, Robert R

    2015-01-01

    Leaders in health care increasingly recognize that improving health care quality and safety requires developing an organizational culture that fosters high reliability and continuous process improvement. For various reasons, a reliability-seeking culture is lacking in most health care settings. Developing a reliability-seeking culture requires leaders' sustained commitment to reliability principles using key mechanisms to embed those principles widely in the organization. The aim of this study was to examine how key mechanisms used by a primary care practice (PCP) might foster a reliability-seeking, system-oriented organizational culture. A case study approach was used to investigate the PCP's reliability culture. The study examined four cultural artifacts used to embed reliability-seeking principles across the organization: leadership statements, decision support tools, and two organizational processes. To decipher their effects on reliability, the study relied on observations of work patterns and the tools' use, interactions during morning huddles and process improvement meetings, interviews with clinical and office staff, and a "collective mindfulness" questionnaire. The five reliability principles framed the data analysis. Leadership statements articulated principles that oriented the PCP toward a reliability-seeking culture of care. Reliability principles became embedded in the everyday discourse and actions through the use of "problem knowledge coupler" decision support tools and daily "huddles." Practitioners and staff were encouraged to report unexpected events or close calls that arose and which often initiated a formal "process change" used to adjust routines and prevent adverse events from recurring. Activities that foster reliable patient care became part of the taken-for-granted routine at the PCP. The analysis illustrates the role leadership, tools, and organizational processes play in developing and embedding a reliable-seeking culture across an

  5. The development and initial validation of a new measure of male body dissatisfaction.

    Science.gov (United States)

    Ochner, Christopher N; Gray, James A; Brickner, Katrina

    2009-12-01

    The purpose of this research was to develop, and establish the initial psychometric properties of, the Male Body Dissatisfaction Scale (MBDS). Ninety-five male students were recruited over three phases. An item-remainder analysis was performed in phase I, convergent and discriminant validity assessed in phase II, and test-retest reliability and factor structure assessed in phase III. The MBDS achieved an alpha level of 0.93 and was inversely related to body esteem (p=0.02) and self-esteem (p=0.03), and positively related to how much participants' opinion of themselves was based on their body shape and weight (pbody shape and weight concerns (pbody dissatisfaction that allows men to weight particular aspects of their body image according to personal importance.

  6. A taxonomy for human reliability analysis

    International Nuclear Information System (INIS)

    Beattie, J.D.; Iwasa-Madge, K.M.

    1984-01-01

    A human interaction taxonomy (classification scheme) was developed to facilitate human reliability analysis in a probabilistic safety evaluation of a nuclear power plant, being performed at Ontario Hydro. A human interaction occurs, by definition, when operators or maintainers manipulate, or respond to indication from, a plant component or system. The taxonomy aids the fault tree analyst by acting as a heuristic device. It helps define the range and type of human errors to be identified in the construction of fault trees, while keeping the identification by different analysts consistent. It decreases the workload associated with preliminary quantification of the large number of identified interactions by including a category called 'simple interactions'. Fault tree analysts quantify these according to a procedure developed by a team of human reliability specialists. The interactions which do not fit into this category are called 'complex' and are quantified by the human reliability team. The taxonomy is currently being used in fault tree construction in a probabilistic safety evaluation. As far as can be determined at this early stage, the potential benefits of consistency and completeness in identifying human interactions and streamlining the initial quantification are being realized

  7. Development of a valid and reliable test to assess trauma radiograph interpretation performance

    International Nuclear Information System (INIS)

    Neep, M.J.; Steffens, T.; Riley, V.; Eastgate, P.; McPhail, S.M.

    2017-01-01

    Objectives: The purpose of this investigation was to develop and examine the preliminary validity and reliability among radiographers of a test to assess trauma radiograph interpretation performance suitable for use among health professionals. Methods: Stage 1 examined 14,159 consecutive appendicular and axial examinations from a hospital emergency department over a 12 month period to quantify a typical anatomical region case-mix of trauma radiographs. A sample of radiographic cases representative of affected anatomical regions was then developed into the Image Interpretation Test (IIT). Stage 2 involved prospective investigations of the IIT's reliability (inter-rater, intra-rater, internal consistency) and validity (concurrent) among 41 radiographers. Results: The IIT included 60 cases. The median (interquartile range) clinical experience of participants was 5 (2–10) years. Case scores were internally consistent (Cronbach's alpha = 0.90). Favourable inter-rater reliability (kappa > 0.70 for 58/60 cases, Intra-class correlation coefficient (ICC) > 0.99 for total score) and intra-rater reliability (kappa > 0.90 for 60/60 cases, ICC > 0.99 for total score) was observed. There was a positive association between radiographers' confidence in image interpretation and IIT score (coefficient = 1.52, r-squared = 0.60, p < 0.001). Conclusions: The IIT developed during this investigation included a selection of radiographic cases consistent with anatomical regions represented in an adult trauma case-mix. This study has also provided foundational preliminary evidence to support the reliability and validity of the IIT among radiographers. The findings suggest that it is possible to assess image interpretation performance of adult trauma radiographs with this test. - Highlights: • Development of an Image Interpretation Test (IIT). • Cases consistent with anatomical regions represented in a typical adult trauma case-mix. • Development of a

  8. Software reliability evaluation of digital plant protection system development process using V and V

    International Nuclear Information System (INIS)

    Lee, Na Young; Hwang, Il Soon; Seong, Seung Hwan; Oh, Seung Rok

    2001-01-01

    In the nuclear power industry, digital technology has been introduced recently for the Instrumentation and Control (I and C) of reactor systems. For its application to the safety critical system such as Reactor Protection System(RPS), a reliability assessment is indispensable. Unlike traditional reliability models, software reliability is hard to evaluate, and should be evaluated throughout development lifecycle. In the development process of Digital Plant Protection System(DPPS), the concept of verification and validation (V and V) was introduced to assure the quality of the product. Also, test should be performed to assure the reliability. Verification procedure with model checking is relatively well defined, however, test is labor intensive and not well organized. In this paper, we developed the methodological process of combining the verification with validation test case generation. For this, we used PVS for the table specification and for the theorem proving. As a result, we could not only save time to design test case but also get more effective and complete verification related test case set. Add to this, we could extract some meaningful factors useful for the reliability evaluation both from the V and V and verification combined tests

  9. Advances in developing rapid, reliable and portable detection systems for alcohol.

    Science.gov (United States)

    Thungon, Phurpa Dema; Kakoti, Ankana; Ngashangva, Lightson; Goswami, Pranab

    2017-11-15

    Development of portable, reliable, sensitive, simple, and inexpensive detection system for alcohol has been an instinctive demand not only in traditional brewing, pharmaceutical, food and clinical industries but also in rapidly growing alcohol based fuel industries. Highly sensitive, selective, and reliable alcohol detections are currently amenable typically through the sophisticated instrument based analyses confined mostly to the state-of-art analytical laboratory facilities. With the growing demand of rapid and reliable alcohol detection systems, an all-round attempt has been made over the past decade encompassing various disciplines from basic and engineering sciences. Of late, the research for developing small-scale portable alcohol detection system has been accelerated with the advent of emerging miniaturization techniques, advanced materials and sensing platforms such as lab-on-chip, lab-on-CD, lab-on-paper etc. With these new inter-disciplinary approaches along with the support from the parallel knowledge growth on rapid detection systems being pursued for various targets, the progress on translating the proof-of-concepts to commercially viable and environment friendly portable alcohol detection systems is gaining pace. Here, we summarize the progress made over the years on the alcohol detection systems, with a focus on recent advancement towards developing portable, simple and efficient alcohol sensors. Copyright © 2017 Elsevier B.V. All rights reserved.

  10. Reliability Calculations

    DEFF Research Database (Denmark)

    Petersen, Kurt Erling

    1986-01-01

    Risk and reliability analysis is increasingly being used in evaluations of plant safety and plant reliability. The analysis can be performed either during the design process or during the operation time, with the purpose to improve the safety or the reliability. Due to plant complexity and safety...... and availability requirements, sophisticated tools, which are flexible and efficient, are needed. Such tools have been developed in the last 20 years and they have to be continuously refined to meet the growing requirements. Two different areas of application were analysed. In structural reliability probabilistic...... approaches have been introduced in some cases for the calculation of the reliability of structures or components. A new computer program has been developed based upon numerical integration in several variables. In systems reliability Monte Carlo simulation programs are used especially in analysis of very...

  11. Developing a system engineering program to improve performance and reliability

    International Nuclear Information System (INIS)

    Keuter, D.

    1985-01-01

    After several maintenance, operational, and equipment problems last year, Trojan set out on a mission to improve plant performance and reliability by strengthening its on-site engineering organization. This paper presents Trojan's plans in developing an on-site system engineering organization

  12. Parts and Components Reliability Assessment: A Cost Effective Approach

    Science.gov (United States)

    Lee, Lydia

    2009-01-01

    System reliability assessment is a methodology which incorporates reliability analyses performed at parts and components level such as Reliability Prediction, Failure Modes and Effects Analysis (FMEA) and Fault Tree Analysis (FTA) to assess risks, perform design tradeoffs, and therefore, to ensure effective productivity and/or mission success. The system reliability is used to optimize the product design to accommodate today?s mandated budget, manpower, and schedule constraints. Stand ard based reliability assessment is an effective approach consisting of reliability predictions together with other reliability analyses for electronic, electrical, and electro-mechanical (EEE) complex parts and components of large systems based on failure rate estimates published by the United States (U.S.) military or commercial standards and handbooks. Many of these standards are globally accepted and recognized. The reliability assessment is especially useful during the initial stages when the system design is still in the development and hard failure data is not yet available or manufacturers are not contractually obliged by their customers to publish the reliability estimates/predictions for their parts and components. This paper presents a methodology to assess system reliability using parts and components reliability estimates to ensure effective productivity and/or mission success in an efficient manner, low cost, and tight schedule.

  13. A Scale for E-Content Preparation Skills: Development, Validity and Reliability

    Science.gov (United States)

    Tekin, Ahmet; Polat, Ebru

    2016-01-01

    Problem Statement: For an effective teaching and learning process it is critical to provide support for teachers in the development of e-content, and teachers should play an active role in this development. Purpose of the Study: The purpose of this study is to develop a valid and reliable Likert-type scale that will determine pre-service teachers'…

  14. Inter-rater reliability of kinesthetic measurements with the KINARM robotic exoskeleton.

    Science.gov (United States)

    Semrau, Jennifer A; Herter, Troy M; Scott, Stephen H; Dukelow, Sean P

    2017-05-22

    Kinesthesia (sense of limb movement) has been extremely difficult to measure objectively, especially in individuals who have survived a stroke. The development of valid and reliable measurements for proprioception is important to developing a better understanding of proprioceptive impairments after stroke and their impact on the ability to perform daily activities. We recently developed a robotic task to evaluate kinesthetic deficits after stroke and found that the majority (~60%) of stroke survivors exhibit significant deficits in kinesthesia within the first 10 days post-stroke. Here we aim to determine the inter-rater reliability of this robotic kinesthetic matching task. Twenty-five neurologically intact control subjects and 15 individuals with first-time stroke were evaluated on a robotic kinesthetic matching task (KIN). Subjects sat in a robotic exoskeleton with their arms supported against gravity. In the KIN task, the robot moved the subjects' stroke-affected arm at a preset speed, direction and distance. As soon as subjects felt the robot begin to move their affected arm, they matched the robot movement with the unaffected arm. Subjects were tested in two sessions on the KIN task: initial session and then a second session (within an average of 18.2 ± 13.8 h of the initial session for stroke subjects), which were supervised by different technicians. The task was performed both with and without the use of vision in both sessions. We evaluated intra-class correlations of spatial and temporal parameters derived from the KIN task to determine the reliability of the robotic task. We evaluated 8 spatial and temporal parameters that quantify kinesthetic behavior. We found that the parameters exhibited moderate to high intra-class correlations between the initial and retest conditions (Range, r-value = [0.53-0.97]). The robotic KIN task exhibited good inter-rater reliability. This validates the KIN task as a reliable, objective method for quantifying

  15. Development and initial validation of a cessation fatigue scale.

    Science.gov (United States)

    Mathew, Amanda R; Heckman, Bryan W; Meier, Ellen; Carpenter, Matthew J

    2017-07-01

    Smoking cessation fatigue, or tiredness of attempting to quit smoking, has been posited as a latent construct encompassing loss of motivation, loss of hope in cessation success, decreased self-efficacy, and exhaustion of self-control resources. Despite the potential clinical impact of characterizing cessation fatigue, there is currently no validated measure to assess it. Using a rational scale development approach, we developed a cessation fatigue measure and examined its reliability and construct validity in relation to a) smokers' experience of a recently failed quit attempt (QA) and b) readiness to engage in a subsequent QA. Data were drawn from an online cross-sectional survey of 484 smokers who relapsed from a QA within the past 30days. Exploratory factor analysis identified three factors within the 17-item Cessation Fatigue Scale (CFS), which we labeled: emotional exhaustion, pessimism, and devaluation. High internal consistency was observed for each factor and across the full scale. As expected, CFS overall was positively associated with withdrawal severity and difficulty quitting. CFS was negatively associated with previously validated measures of intention to quit, self-efficacy, and abstinence-related motivational engagement, even after adjusting for nicotine dependence. Findings provide initial validation for a new tool to assess cessation fatigue and contribute needed information on a theory-driven component of cessation-related motivation and relapse risk. Copyright © 2017. Published by Elsevier B.V.

  16. 75 FR 36385 - Reliability Standards Development and NERC and Regional Entity Enforcement Supplemental Notice of...

    Science.gov (United States)

    2010-06-25

    ... Standards Development and NERC and Regional Entity Enforcement Supplemental Notice of Technical Conference... development and enforcement of mandatory Reliability Standards for the Bulk-Power System by the North American Electric Reliability Corporation and the Regional Entities. The conference will be held on Tuesday, July 6...

  17. Creation and Initial Validation of the International Dysphagia Diet Standardisation Initiative Functional Diet Scale.

    Science.gov (United States)

    Steele, Catriona M; Namasivayam-MacDonald, Ashwini M; Guida, Brittany T; Cichero, Julie A; Duivestein, Janice; Hanson, Ben; Lam, Peter; Riquelme, Luis F

    2018-05-01

    To assess consensual validity, interrater reliability, and criterion validity of the International Dysphagia Diet Standardisation Initiative Functional Diet Scale, a new functional outcome scale intended to capture the severity of oropharyngeal dysphagia, as represented by the degree of diet texture restriction recommended for the patient. Participants assigned International Dysphagia Diet Standardisation Initiative Functional Diet Scale scores to 16 clinical cases. Consensual validity was measured against reference scores determined by an author reference panel. Interrater reliability was measured overall and across quartile subsets of the dataset. Criterion validity was evaluated versus Functional Oral Intake Scale (FOIS) scores assigned by survey respondents to the same case scenarios. Feedback was requested regarding ease and likelihood of use. Web-based survey. Respondents (N=170) from 29 countries. Not applicable. Consensual validity (percent agreement and Kendall τ), criterion validity (Spearman rank correlation), and interrater reliability (Kendall concordance and intraclass coefficients). The International Dysphagia Diet Standardisation Initiative Functional Diet Scale showed strong consensual validity, criterion validity, and interrater reliability. Scenarios involving liquid-only diets, transition from nonoral feeding, or trial diet advances in therapy showed the poorest consensus, indicating a need for clear instructions on how to score these situations. The International Dysphagia Diet Standardisation Initiative Functional Diet Scale showed greater sensitivity than the FOIS to specific changes in diet. Most (>70%) respondents indicated enthusiasm for implementing the International Dysphagia Diet Standardisation Initiative Functional Diet Scale. This initial validation study suggests that the International Dysphagia Diet Standardisation Initiative Functional Diet Scale has strong consensual and criterion validity and can be used reliably by clinicians

  18. RTE - Reliability report 2016

    International Nuclear Information System (INIS)

    2017-06-01

    Every year, RTE produces a reliability report for the past year. This document lays out the main factors that affected the electrical power system's operational reliability in 2016 and the initiatives currently under way intended to ensure its reliability in the future. Within a context of the energy transition, changes to the European interconnected network mean that RTE has to adapt on an on-going basis. These changes include the increase in the share of renewables injecting an intermittent power supply into networks, resulting in a need for flexibility, and a diversification in the numbers of stakeholders operating in the energy sector and changes in the ways in which they behave. These changes are dramatically changing the structure of the power system of tomorrow and the way in which it will operate - particularly the way in which voltage and frequency are controlled, as well as the distribution of flows, the power system's stability, the level of reserves needed to ensure supply-demand balance, network studies, assets' operating and control rules, the tools used and the expertise of operators. The results obtained in 2016 are evidence of a globally satisfactory level of reliability for RTE's operations in somewhat demanding circumstances: more complex supply-demand balance management, cross-border schedules at interconnections indicating operation that is closer to its limits and - most noteworthy - having to manage a cold spell just as several nuclear power plants had been shut down. In a drive to keep pace with the changes expected to occur in these circumstances, RTE implemented numerous initiatives to ensure high levels of reliability: - maintaining investment levels of euro 1.5 billion per year; - increasing cross-zonal capacity at borders with our neighbouring countries, thus bolstering the security of our electricity supply; - implementing new mechanisms (demand response, capacity mechanism, interruptibility, etc.); - involvement in tests or projects

  19. Need for appropriate formulations for children: the national institute of child health and human development-pediatric formulations initiative, part 2.

    Science.gov (United States)

    Giacoia, George P; Taylor-Zapata, Perdita; Mattison, Donald

    2007-01-01

    The development and compounding of pharmacotherapeutic formulations that are suitable for infants and young children can be a challenging problem. This problem results from the lack of knowledge on the acceptability of different dosage forms and formulations to children in relation to age and developmental status, as well as the lack of reliable documentation of formulations used in pediatric clinical trials. As part of its mandate under the Best Pharmaceuticals for Children Act to improve pediatric therapeutics, the National Institute of Child Health and Human Development has sponsored the Pediatric Formulations Initiative. The goal of this ongoing initiative is to address the issues and concerns associated with pediatric therapeutics by convening groups of researchers and experts in pediatric formulations from academia, pharmaceutical companies, the National Institutes of Health, and the U.S. Food and Drug Administration. In this second part of a two-part article, the activities of the various groups that constitute the Pediatric Formulations Initiative are discussed, in addition the Initiative's future activities and plans are outlined.

  20. Development and reliability testing of a food store observation form.

    Science.gov (United States)

    Rimkus, Leah; Powell, Lisa M; Zenk, Shannon N; Han, Euna; Ohri-Vachaspati, Punam; Pugach, Oksana; Barker, Dianne C; Resnick, Elissa A; Quinn, Christopher M; Myllyluoma, Jaana; Chaloupka, Frank J

    2013-01-01

    To develop a reliable food store observational data collection instrument to be used for measuring product availability, pricing, and promotion. Observational data collection. A total of 120 food stores (26 supermarkets, 34 grocery stores, 54 gas/convenience stores, and 6 mass merchandise stores) in the Chicago metropolitan statistical area. Inter-rater reliability for product availability, pricing, and promotion measures on a food store observational data collection instrument. Cohen's kappa coefficient and proportion of overall agreement for dichotomous variables and intra-class correlation coefficient for continuous variables. Inter-rater reliability, as measured by average kappa coefficient, was 0.84 for food and beverage product availability measures, 0.80 for interior store characteristics, and 0.70 for exterior store characteristics. For continuous measures, average intra-class correlation coefficient was 0.82 for product pricing measures; 0.90 for counts of fresh, frozen, and canned fruit and vegetable options; and 0.85 for counts of advertisements on the store exterior and property. The vast majority of measures demonstrated substantial or almost perfect agreement. Although some items may require revision, results suggest that the instrument may be used to reliably measure the food store environment. Copyright © 2013 Society for Nutrition Education and Behavior. Published by Elsevier Inc. All rights reserved.

  1. The Children's Play Therapy Instrument (CPTI). Description, development, and reliability studies.

    Science.gov (United States)

    Kernberg, P F; Chazan, S E; Normandin, L

    1998-01-01

    The Children's Play Therapy Instrument (CPTI), its development, and reliability studies are described. The CPTI is a new instrument to examine a child's play activity in individual psychotherapy. Three independent raters used the CPTI to rate eight videotaped play therapy vignettes. Results were compared with the authors' consensual scores from a preliminary study. Generally good to excellent levels of interrater reliability were obtained for the independent raters on intraclass correlation coefficients for ordinal categories of the CPTI. Likewise, kappa levels were acceptable to excellent for nominal categories of the scale. The CPTI holds promise to become a reliable measure of play activity in child psychotherapy. Further research is needed to assess discriminant validity of the CPTI for use as a diagnostic tool and as a measure of process and outcome.

  2. Training benefits of research on operator reliability

    International Nuclear Information System (INIS)

    Worledge, D.H.

    1989-01-01

    The purpose of the EPRI Operator Reliability Experiments (ORE) Program is to collect data for use in reliability and safety studies of nuclear power plant operation which more realistically take credit for operator performance in preventing core damage. The three objectives in fulfilling this purpose are: to obtain quantitative/qualitative performance data on operating crew responses in the control room for potential accident sequences by using plant simulators; to test the human cognitive reliability (HCR) correlation; and to develop a data collection analysis procedure. This paper discusses the background to this program, data collection and analysis, and the results of quantitative/qualitative insights stemming from initial work. Special attention is paid to how this program impacts upon simulator use and assessment of simulator fidelity. Attention is also paid to the use of data collection procedures to assist training departments in assessing the quality of their training programs

  3. Experimental investigation on the development characteristics of initial electrons in a gas pressurized closing switch under DC voltage

    Science.gov (United States)

    Rongxiao, ZHAI; Mengtong, QIU; Weixi, LUO; Peitian, CONG; Tao, HUANG; Jiahui, YIN; Tianyang, ZHANG

    2018-04-01

    As one of the most important elements in linear transformer driver (LTD) based systems, the gas pressurized closing switches are required to operate with a very low prefire probability during the DC-charging process to ensure reliable operation and stable output of the whole pulsed power system. The most direct and effective way to control the prefire probability is to select a suitable working coefficient. The study of the development characteristics of the initially generated electrons is useful for optimizing the working coefficient and improving the prefire characteristic of the switches. In this paper an ultraviolet pulsed laser is used to generate initial electrons inside the gap volume. A current measuring system is used to measure the time-dependent current generated by the growth of the initial electrons so as to study the development characteristics of the electrons under different working coefficients. Experimental results show that the development characteristics of the initial electrons are influenced obviously by the working coefficient. With the increase of the working coefficient, the development degree of the electrons increases consequently. At the same times, there is a threshold of working coefficient which produces the effect of ionization on electrons. The range of the threshold has a slow growth but remains close to 65% with the gas pressure increase. When the working coefficient increases further, γ processes are starting to be generated inside the gap volume. In addition, an optimal working coefficient beneficial for improving the prefire characteristic is indicated and further tested.

  4. Technology development of maintenance optimization and reliability analysis for safety features in nuclear power plants

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Tae Woon; Choi, Seong Soo; Lee, Dong Gue; Kim, Young Il

    1999-12-01

    The reliability data management system (RDMS) for safety systems of PHWR type plants has been developed and utilized in the reliability analysis of the special safety systems of Wolsong Unit 1,2 with plant overhaul period lengthened. The RDMS is developed for the periodic efficient reliability analysis of the safety systems of Wolsong Unit 1,2. In addition, this system provides the function of analyzing the effects on safety system unavailability if the test period of a test procedure changes as well as the function of optimizing the test periods of safety-related test procedures. The RDMS can be utilized in handling the requests of the regulatory institute actively with regard to the reliability validation of safety systems. (author)

  5. Development of reliable pavement models.

    Science.gov (United States)

    2011-05-01

    The current report proposes a framework for estimating the reliability of a given pavement structure as analyzed by : the Mechanistic-Empirical Pavement Design Guide (MEPDG). The methodology proposes using a previously fit : response surface, in plac...

  6. A Validity and Reliability Study of the Attitudes toward Sustainable Development Scale

    Science.gov (United States)

    Biasutti, Michele; Frate, Sara

    2017-01-01

    This article describes the development and validation of the Attitudes toward Sustainable Development scale, a quantitative 20-item scale that measures Italian university students' attitudes toward sustainable development. A total of 484 undergraduate students completed the questionnaire. The validity and reliability of the scale was statistically…

  7. Engineering, maintenance, and new initiatives to improve LAMPF beam availability and system reliability

    International Nuclear Information System (INIS)

    Harris, H.W.; DeHaven, R.A.; Hart, V.E.; Parsons, W.M.; Sturrock, J.C.

    1992-01-01

    Two different requirements are driving engineering studies and hardware development to improve LAMPF. The first is concerned with component and system improvements to increase beam availability during the LAMPF production cycle. Hardware changes in RF, power supplies, and magnets are being implemented to increase mean time between failure and reduce time to replace or repair failed units. A joint LAMPF-Industry project is on-going to improve reliability of RF components. A component test stand is being refurbished to include significant development capability. The second approach includes several changes that will increase the duty factor of the existing accelerator. Major changes are being evaluated for replacing the front end of the accelerator. Other changes improving high brightness capability could result in a new performance plateau for LAMPF

  8. Development of a quality-assessment tool for experimental bruxism studies: reliability and validity.

    Science.gov (United States)

    Dawson, Andreas; Raphael, Karen G; Glaros, Alan; Axelsson, Susanna; Arima, Taro; Ernberg, Malin; Farella, Mauro; Lobbezoo, Frank; Manfredini, Daniele; Michelotti, Ambra; Svensson, Peter; List, Thomas

    2013-01-01

    To combine empirical evidence and expert opinion in a formal consensus method in order to develop a quality-assessment tool for experimental bruxism studies in systematic reviews. Tool development comprised five steps: (1) preliminary decisions, (2) item generation, (3) face-validity assessment, (4) reliability and discriminitive validity assessment, and (5) instrument refinement. The kappa value and phi-coefficient were calculated to assess inter-observer reliability and discriminative ability, respectively. Following preliminary decisions and a literature review, a list of 52 items to be considered for inclusion in the tool was compiled. Eleven experts were invited to join a Delphi panel and 10 accepted. Four Delphi rounds reduced the preliminary tool-Quality-Assessment Tool for Experimental Bruxism Studies (Qu-ATEBS)- to 8 items: study aim, study sample, control condition or group, study design, experimental bruxism task, statistics, interpretation of results, and conflict of interest statement. Consensus among the Delphi panelists yielded good face validity. Inter-observer reliability was acceptable (k = 0.77). Discriminative validity was excellent (phi coefficient 1.0; P reviews of experimental bruxism studies, exhibits face validity, excellent discriminative validity, and acceptable inter-observer reliability. Development of quality assessment tools for many other topics in the orofacial pain literature is needed and may follow the described procedure.

  9. Reliability Evaluation for Optimizing Electricity Supply in a Developing Country

    OpenAIRE

    Mark Ndubuka NWOHU

    2007-01-01

    The reliability standards for electricity supply in a developing country, like Nigeria, have to be determined on past engineering principles and practice. Because of the high demand of electrical power due to rapid development, industrialization and rural electrification; the economic, social and political climate in which the electric power supply industry now operates should be critically viewed to ensure that the production of electrical power should be augmented and remain uninterrupted. ...

  10. Initial development and psychometric testing of an instrument to measure the quality of children's end-of-life care.

    Science.gov (United States)

    Widger, Kimberley; Tourangeau, Ann E; Steele, Rose; Streiner, David L

    2015-01-01

    The field of pediatric palliative care is hindered by the lack of a well-defined, reliable, and valid method for measuring the quality of end-of-life care. The study purpose was to develop and test an instrument to measure mothers' perspectives on the quality of care received before, at the time of, and following a child's death. In Phase 1, key components of quality end-of-life care for children were synthesized through a comprehensive review of research literature. These key components were validated in Phase 2 and then extended through focus groups with bereaved parents. In Phase 3, items were developed to assess structures, processes, and outcomes of quality end-of-life care then tested for content and face validity with health professionals. Cognitive testing was conducted through interviews with bereaved parents. In Phase 4, bereaved mothers were recruited through 10 children's hospitals/hospices in Canada to complete the instrument, and psychometric testing was conducted. Following review of 67 manuscripts and 3 focus groups with 10 parents, 141 items were initially developed. The overall content validity index for these items was 0.84 as rated by 7 health professionals. Based on feedback from health professionals and cognitive testing with 6 parents, a 144-item instrument was finalized for further testing. In Phase 4, 128 mothers completed the instrument, 31 of whom completed it twice. Test-retest reliability, internal consistency, and construct validity were demonstrated for six subscales: Connect With Families, Involve Parents, Share Information With Parents, Share Information Among Health Professionals, Support Parents, and Provide Care at Death. Additional items with content validity were grouped in four domains: Support the Child, Support Siblings, Provide Bereavement Follow-up, and Structures of Care. Forty-eight items were deleted through psychometric testing, leaving a 95-item instrument. There is good initial evidence for the reliability and

  11. Consumer participation in quality improvements for chronic disease care: development and evaluation of an interactive patient-centered survey to identify preferred service initiatives.

    Science.gov (United States)

    Fradgley, Elizabeth A; Paul, Christine L; Bryant, Jamie; Roos, Ian A; Henskens, Frans A; Paul, David J

    2014-12-19

    With increasing attention given to the quality of chronic disease care, a measurement approach that empowers consumers to participate in improving quality of care and enables health services to systematically introduce patient-centered initiatives is needed. A Web-based survey with complex adaptive questioning and interactive survey items would allow consumers to easily identify and prioritize detailed service initiatives. The aim was to develop and test a Web-based survey capable of identifying and prioritizing patient-centered initiatives in chronic disease outpatient services. Testing included (1) test-retest reliability, (2) patient-perceived acceptability of the survey content and delivery mode, and (3) average completion time, completion rates, and Flesch-Kincaid reading score. In Phase I, the Web-based Consumer Preferences Survey was developed based on a structured literature review and iterative feedback from expert groups of service providers and consumers. The touchscreen survey contained 23 general initiatives, 110 specific initiatives available through adaptive questioning, and a relative prioritization exercise. In Phase II, a pilot study was conducted within 4 outpatient clinics to evaluate the reliability properties, patient-perceived acceptability, and feasibility of the survey. Eligible participants were approached to complete the survey while waiting for an appointment or receiving intravenous therapy. The age and gender of nonconsenters was estimated to ascertain consent bias. Participants with a subsequent appointment within 14 days were asked to complete the survey for a second time. A total of 741 of 1042 individuals consented to participate (71.11% consent), 529 of 741 completed all survey content (78.9% completion), and 39 of 68 completed the test-retest component. Substantial or moderate reliability (Cohen's kappa>0.4) was reported for 16 of 20 general initiatives with observed percentage agreement ranging from 82.1%-100.0%. The majority of

  12. Consumer Participation in Quality Improvements for Chronic Disease Care: Development and Evaluation of an Interactive Patient-Centered Survey to Identify Preferred Service Initiatives

    Science.gov (United States)

    Paul, Christine L; Bryant, Jamie; Roos, Ian A; Henskens, Frans A; Paul, David J

    2014-01-01

    Background With increasing attention given to the quality of chronic disease care, a measurement approach that empowers consumers to participate in improving quality of care and enables health services to systematically introduce patient-centered initiatives is needed. A Web-based survey with complex adaptive questioning and interactive survey items would allow consumers to easily identify and prioritize detailed service initiatives. Objective The aim was to develop and test a Web-based survey capable of identifying and prioritizing patient-centered initiatives in chronic disease outpatient services. Testing included (1) test-retest reliability, (2) patient-perceived acceptability of the survey content and delivery mode, and (3) average completion time, completion rates, and Flesch-Kincaid reading score. Methods In Phase I, the Web-based Consumer Preferences Survey was developed based on a structured literature review and iterative feedback from expert groups of service providers and consumers. The touchscreen survey contained 23 general initiatives, 110 specific initiatives available through adaptive questioning, and a relative prioritization exercise. In Phase II, a pilot study was conducted within 4 outpatient clinics to evaluate the reliability properties, patient-perceived acceptability, and feasibility of the survey. Eligible participants were approached to complete the survey while waiting for an appointment or receiving intravenous therapy. The age and gender of nonconsenters was estimated to ascertain consent bias. Participants with a subsequent appointment within 14 days were asked to complete the survey for a second time. Results A total of 741 of 1042 individuals consented to participate (71.11% consent), 529 of 741 completed all survey content (78.9% completion), and 39 of 68 completed the test-retest component. Substantial or moderate reliability (Cohen’s kappa>0.4) was reported for 16 of 20 general initiatives with observed percentage agreement

  13. Development status of component reliability database for Korean NPPs and a case study

    International Nuclear Information System (INIS)

    Choi, S. Y.; Yang, S. H.; Lee, S. C.; Kim, S. H.; Han, S. H.

    1999-01-01

    We have applied a generic database to the PSA (Probabilistic Safety Assessment) for the Korean Standard NPPs (Nuclear Power Plant) since there is no specific component reliability database. However generic data is not enough to reflect the specific characteristics of domestic plants since it is collected by foreign plants. Therefore we are developing the plant-specific component reliability database for domestic NPPs. In this paper, we describe the development status of the component reliability database and the approach method of data collection and component failure analysis. We also summarize a case study of component failure analysis. We first collect the failure and repair data from the TR (Trouble Report) electronic database and the daily operation report sheet. Now we add a data collection method that checks the original TR sheet to improve the data quality. We input the component failure and repair data of principal components of about 30 systems into the component reliability database. Now, we are analyzing the component failure data of 11 safety systems among the systems to calculate component failure rate and unavailability etc

  14. Test set for initial value problem solvers

    NARCIS (Netherlands)

    W.M. Lioen (Walter); J.J.B. de Swart (Jacques)

    1998-01-01

    textabstractThe CWI test set for IVP solvers presents a collection of Initial Value Problems to test solvers for implicit differential equations. This test set can both decrease the effort for the code developer to test his software in a reliable way, and cross the bridge between the application

  15. A reliability simulation language for reliability analysis

    International Nuclear Information System (INIS)

    Deans, N.D.; Miller, A.J.; Mann, D.P.

    1986-01-01

    The results of work being undertaken to develop a Reliability Description Language (RDL) which will enable reliability analysts to describe complex reliability problems in a simple, clear and unambiguous way are described. Component and system features can be stated in a formal manner and subsequently used, along with control statements to form a structured program. The program can be compiled and executed on a general-purpose computer or special-purpose simulator. (DG)

  16. Development of Probabilistic Reliability Models of Photovoltaic System Topologies for System Adequacy Evaluation

    Directory of Open Access Journals (Sweden)

    Ahmad Alferidi

    2017-02-01

    Full Text Available The contribution of solar power in electric power systems has been increasing rapidly due to its environmentally friendly nature. Photovoltaic (PV systems contain solar cell panels, power electronic converters, high power switching and often transformers. These components collectively play an important role in shaping the reliability of PV systems. Moreover, the power output of PV systems is variable, so it cannot be controlled as easily as conventional generation due to the unpredictable nature of weather conditions. Therefore, solar power has a different influence on generating system reliability compared to conventional power sources. Recently, different PV system designs have been constructed to maximize the output power of PV systems. These different designs are commonly adopted based on the scale of a PV system. Large-scale grid-connected PV systems are generally connected in a centralized or a string structure. Central and string PV schemes are different in terms of connecting the inverter to PV arrays. Micro-inverter systems are recognized as a third PV system topology. It is therefore important to evaluate the reliability contribution of PV systems under these topologies. This work utilizes a probabilistic technique to develop a power output model for a PV generation system. A reliability model is then developed for a PV integrated power system in order to assess the reliability and energy contribution of the solar system to meet overall system demand. The developed model is applied to a small isolated power unit to evaluate system adequacy and capacity level of a PV system considering the three topologies.

  17. Stochastic Differential Equation-Based Flexible Software Reliability Growth Model

    Directory of Open Access Journals (Sweden)

    P. K. Kapur

    2009-01-01

    Full Text Available Several software reliability growth models (SRGMs have been developed by software developers in tracking and measuring the growth of reliability. As the size of software system is large and the number of faults detected during the testing phase becomes large, so the change of the number of faults that are detected and removed through each debugging becomes sufficiently small compared with the initial fault content at the beginning of the testing phase. In such a situation, we can model the software fault detection process as a stochastic process with continuous state space. In this paper, we propose a new software reliability growth model based on Itô type of stochastic differential equation. We consider an SDE-based generalized Erlang model with logistic error detection function. The model is estimated and validated on real-life data sets cited in literature to show its flexibility. The proposed model integrated with the concept of stochastic differential equation performs comparatively better than the existing NHPP-based models.

  18. Understanding the Sustainability of Private Development Initiatives

    NARCIS (Netherlands)

    Kinsbergen, Sara; Schulpen, Lau; Ruben, Ruerd

    2017-01-01

    In the Netherlands, there is a large group of small-scale, voluntary development organisations, referred to as Private Development Initiatives (PDIs). By classifying PDI interventions based on their potential sustainability, we aim to enhance our understanding of PDIs as alternative development

  19. Geriatric medicine, Japanese Alzheimer's disease neuroimaging initiative and biomarker development

    International Nuclear Information System (INIS)

    Arai, Hiroyuki; Furukawa, Katsutoshi; Okamura, Nobuyuki; Kudo, Yukitsuka

    2010-01-01

    Due to a change in disease spectrum in aged countries, the primary role of geriatricians should be directed to an appropriate management and prevention of cognitive decline and dementia, swallowing and aspiration pneumonia and falls and fractures. Management of dementia constitutes a central part in the practice of geriatric medicine in order to support independence of life in elderly people. The current paradigm of cognitive function-based testing for the diagnosis and treatment of Alzheimer's disease (AD) is going to drastically shift to a biomarker-based test approach, a shift that will correspond to the emergence of disease-modifying drugs. In addition, a new molecular imaging technique that visualizes neuronal protein deposits or pathological features has been developed in Japan and the U.S.A. Based on these achievements, the Alzheimer's Disease Neuroimaging Initiative (ADNI) was proposed and initiated in 2005. The ADNI is a long-term observational study being conducted in the U.S.A., Europe, Australia, and Japan using identical protocols. The objectives of ADNI are: to establish methodology which will allow standard values related to long-term changes in imaging data, such as MRI and positron emission tomography (PET), in patients with AD and mild cognitive impairment and normal elderly persons; to obtain clinical indices, psychological test data, and blood/cerebrospinal fluid biomarkers to demonstrate the validity of image-based surrogate markers; and to establish optimum methods to monitor the therapeutic effects of disease-modifying drugs for AD. Patient enrollment in the Japanese ADNI has begun in July 2008. Imaging of AD pathology not only acts as a reliable biomarker with which to assay curative drug development by novel pharmaceutical companies, but it also helps health promotion toward AD prevention. (author)

  20. Safety management of pipelines based on structural reliability: historical perspective and progress

    Energy Technology Data Exchange (ETDEWEB)

    Beck, Andre Teofilo; Bazan, Felipe Alexander Vargas [Universidade de Sao Paulo (USP), SP (Brazil); Mendes, Renato [Petroleo Brasileiro S.A. (PETROBRAS), Rio de Janeiro, RJ (Brazil); Donato, Guilherme [Petroleo Brasileiro S.A. (PETROBRAS/CENPES), Rio de Janeiro, RJ (Brazil). Centro de Pesquisas e Desenvolvimento; Gardiner, Michael [GL Noble Denton, Loughborough (United Kingdom)

    2012-07-01

    Since the early beginnings in the sixties and seventies, Structural Reliability theory has reached a mature stage encompassing solid theoretical developments and increasing practical applications. Structural reliability methods have permeated the engineering profession, finding applications in code calibration, structural optimization, life extension of existing structures, life-cycle management of infrastructure risks and costs, and so on. This review paper shows that the ground work for Reliability Based Design and Assessment (RBDA) of onshore pipeline systems is already developed. Hence, this allows the economic management of the risks involved in operation of pipeline systems. It is shown that RBDA is a rational tool to safely manage the operational life of pipeline systems, optimizing initial design and the expenditures in inspection and maintenance operations. (author)

  1. Final Report for the Virtual Reliability Realization System LDRD

    Energy Technology Data Exchange (ETDEWEB)

    DELLIN, THEODORE A.; HENDERSON, CHRISTOPHER L.; O' TOOLE, EDWARD J.

    2000-12-01

    Current approaches to reliability are not adequate to keep pace with the need for faster, better and cheaper products and systems. This is especially true in high consequence of failure applications. The original proposal for the LDRD was to look at this challenge and see if there was a new paradigm that could make reliability predictions, along with a quantitative estimate of the risk in that prediction, in a way that was faster, better and cheaper. Such an approach would be based on the underlying science models that are the backbone of reliability predictions. The new paradigm would be implemented in two software tools: the Virtual Reliability Realization System (VRRS) and the Reliability Expert System (REX). The three-year LDRD was funded at a reduced level for the first year ($120K vs. $250K) and not renewed. Because of the reduced funding, we concentrated on the initial development of the expertise system. We developed an interactive semiconductor calculation tool needed for reliability analyses. We also were able to generate a basic functional system using Microsoft Siteserver Commerce Edition and Microsoft Sequel Server. The base system has the capability to store Office documents from multiple authors, and has the ability to track and charge for usage. The full outline of the knowledge model has been incorporated as well as examples of various types of content.

  2. A Mechanically Proved and an Incremental Development of the Session Initiation Protocol INVITE Transaction

    Directory of Open Access Journals (Sweden)

    Rajaa Filali

    2014-01-01

    Full Text Available The Session Initiation Protocol (SIP is an application layer signaling protocol used to create, manage, and terminate sessions in an IP based network. SIP is considered as a transactional protocol. There are two main SIP transactions, the INVITE transaction and the non-INVITE transaction. The SIP INVITE transaction specification is described in an informal way in Request for Comments (RFC 3261 and modified in RFC 6026. In this paper we focus on the INVITE transaction of SIP, over reliable and unreliable transport mediums, which is used to initiate a session. In order to ensure the correctness of SIP, the INVITE transaction is modeled and verified using event-B method and its Rodin platform. The Event-B refinement concept allows an incremental development by defining the studied system at different levels of abstraction, and Rodin discharges almost all proof obligations at each level. This interaction between modeling and proving reduces the complexity and helps in assuring that the INVITE transaction SIP specification is correct, unambiguous, and easy to understand.

  3. Development of slim-maud: a multi-attribute utility approach to human reliability evaluation

    International Nuclear Information System (INIS)

    Embrey, D.E.

    1984-01-01

    This paper describes further work on the Success Likelihood Index Methodology (SLIM), a procedure for quantitatively evaluating human reliability in nuclear power plants and other systems. SLIM was originally developed by Human Reliability Associates during an earlier contract with Brookhaven National Laboratory (BNL). A further development of SLIM, SLIM-MAUD (Multi-Attribute Utility Decomposition) is also described. This is an extension of the original approach using an interactive, computer-based system. All of the work described in this report was supported by the Human Factors and Safeguards Branch of the US Nuclear Regulatory Commission

  4. Software reliability

    CERN Document Server

    Bendell, A

    1986-01-01

    Software Reliability reviews some fundamental issues of software reliability as well as the techniques, models, and metrics used to predict the reliability of software. Topics covered include fault avoidance, fault removal, and fault tolerance, along with statistical methods for the objective assessment of predictive accuracy. Development cost models and life-cycle cost models are also discussed. This book is divided into eight sections and begins with a chapter on adaptive modeling used to predict software reliability, followed by a discussion on failure rate in software reliability growth mo

  5. Reliability of a retail food store survey and development of an accompanying retail scoring system to communicate survey findings and identify vendors for healthful food and marketing initiatives.

    Science.gov (United States)

    Ghirardelli, Alyssa; Quinn, Valerie; Sugerman, Sharon

    2011-01-01

    To develop a retail grocery instrument with weighted scoring to be used as an indicator of the food environment. Twenty six retail food stores in low-income areas in California. Observational. Inter-rater reliability for grocery store survey instrument. Description of store scoring methodology weighted to emphasize availability of healthful food. Type A intra-class correlation coefficients (ICC) with absolute agreement definition or a κ test for measures using ranges as categories. Measures of availability and price of fruits and vegetables performed well in reliability testing (κ = 0.681-0.800). Items for vegetable quality were better than for fruit (ICC 0.708 vs 0.528). Kappa scores indicated low to moderate agreement (0.372-0.674) on external store marketing measures and higher scores for internal store marketing. "Next to" the checkout counter was more reliable than "within 6 feet." Health departments using the store scoring system reported it as the most useful communication of neighborhood findings. There was good reliability of the measures among the research pairs. The local store scores can show the need to bring in resources and to provide access to fruits and vegetables and other healthful food. Copyright © 2011 Society for Nutrition Education. Published by Elsevier Inc. All rights reserved.

  6. NECTAR: initiatives and development 2008-2016

    OpenAIRE

    Dimmock, Nick; Hibbert, Dawn

    2017-01-01

    A poster illustrating the development of NECTAR, the University of Northampton's research repository, since its launch in 2008. Key initiatives and projects are highlighted, along with statistics on deposit activity and downloads.

  7. Structural reliability methods: Code development status

    Science.gov (United States)

    Millwater, Harry R.; Thacker, Ben H.; Wu, Y.-T.; Cruse, T. A.

    1991-05-01

    The Probabilistic Structures Analysis Method (PSAM) program integrates state of the art probabilistic algorithms with structural analysis methods in order to quantify the behavior of Space Shuttle Main Engine structures subject to uncertain loadings, boundary conditions, material parameters, and geometric conditions. An advanced, efficient probabilistic structural analysis software program, NESSUS (Numerical Evaluation of Stochastic Structures Under Stress) was developed as a deliverable. NESSUS contains a number of integrated software components to perform probabilistic analysis of complex structures. A nonlinear finite element module NESSUS/FEM is used to model the structure and obtain structural sensitivities. Some of the capabilities of NESSUS/FEM are shown. A Fast Probability Integration module NESSUS/FPI estimates the probability given the structural sensitivities. A driver module, PFEM, couples the FEM and FPI. NESSUS, version 5.0, addresses component reliability, resistance, and risk.

  8. Reliability calculations

    International Nuclear Information System (INIS)

    Petersen, K.E.

    1986-03-01

    Risk and reliability analysis is increasingly being used in evaluations of plant safety and plant reliability. The analysis can be performed either during the design process or during the operation time, with the purpose to improve the safety or the reliability. Due to plant complexity and safety and availability requirements, sophisticated tools, which are flexible and efficient, are needed. Such tools have been developed in the last 20 years and they have to be continuously refined to meet the growing requirements. Two different areas of application were analysed. In structural reliability probabilistic approaches have been introduced in some cases for the calculation of the reliability of structures or components. A new computer program has been developed based upon numerical integration in several variables. In systems reliability Monte Carlo simulation programs are used especially in analysis of very complex systems. In order to increase the applicability of the programs variance reduction techniques can be applied to speed up the calculation process. Variance reduction techniques have been studied and procedures for implementation of importance sampling are suggested. (author)

  9. Reliability and Failure in NASA Missions: Blunders, Normal Accidents, High Reliability, Bad Luck

    Science.gov (United States)

    Jones, Harry W.

    2015-01-01

    NASA emphasizes crew safety and system reliability but several unfortunate failures have occurred. The Apollo 1 fire was mistakenly unanticipated. After that tragedy, the Apollo program gave much more attention to safety. The Challenger accident revealed that NASA had neglected safety and that management underestimated the high risk of shuttle. Probabilistic Risk Assessment was adopted to provide more accurate failure probabilities for shuttle and other missions. NASA's "faster, better, cheaper" initiative and government procurement reform led to deliberately dismantling traditional reliability engineering. The Columbia tragedy and Mars mission failures followed. Failures can be attributed to blunders, normal accidents, or bad luck. Achieving high reliability is difficult but possible.

  10. The Children's Play Therapy Instrument (CPTI): Description, Development, and Reliability Studies

    Science.gov (United States)

    Kernberg, Paulina F.; Chazan, Saralea E.; Normandin, Lina

    1998-01-01

    The Children's Play Therapy Instrument (CPTI), its development, and reliability studies are described. The CPTI is a new instrument to examine a child's play activity in individual psychotherapy. Three independent raters used the CPTI to rate eight videotaped play therapy vignettes. Results were compared with the authors' consensual scores from a preliminary study. Generally good to excellent levels of interrater reliability were obtained for the independent raters on intraclass correlation coefficients for ordinal categories of the CPTI. Likewise, kappa levels were acceptable to excellent for nominal categories of the scale. The CPTI holds promise to become a reliable measure of play activity in child psychotherapy. Further research is needed to assess discriminant validity of the CPTI for use as a diagnostic tool and as a measure of process and outcome.(The Journal of Psychotherapy Practice and Research 1998; 7:196–207) PMID:9631341

  11. Reliability of structures by using probability and fatigue theories

    International Nuclear Information System (INIS)

    Lee, Ouk Sub; Kim, Dong Hyeok; Park, Yeon Chang

    2008-01-01

    Methodologies to calculate failure probability and to estimate the reliability of fatigue loaded structures are developed. The applicability of the methodologies is evaluated with the help of the fatigue crack growth models suggested by Paris and Walker. The probability theories such as the FORM (first order reliability method), the SORM (second order reliability method) and the MCS (Monte Carlo simulation) are utilized. It is found that the failure probability decreases with the increase of the design fatigue life and the applied minimum stress, the decrease of the initial edge crack size, the applied maximum stress and the slope of Paris equation. Furthermore, according to the sensitivity analysis of random variables, the slope of Pairs equation affects the failure probability dominantly among other random variables in the Paris and the Walker models

  12. View all initiatives | IDRC - International Development Research ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    The Open Data for Development program's global network will facilitate and scale innovative approaches to open data to ensure benefits reach citizens in developing countries. Combining research and action to address scaling and sustainability of open data for development initiatives is key to the network's success.

  13. Need for appropriate formulations for children: the national institute of child health and human development-pediatric formulations initiative, part 1.

    Science.gov (United States)

    Giacoia, George P; Taylor-Zapata, Perdita; Mattison, Donald

    2007-01-01

    The development and compounding of pharmacotherapeutic formulations that are suitable for infants and young children can be a challenging problem. This problem results from the lack of knowledge on the acceptability of different dosage forms and formulations in children in relation to age and developmental status, as well as the lack of reliable documentation of formulations used in pediatric clinical trials. As part of its mandate under the Best Pharmaceuticals for Children Act to improve pediatric therapeutics, the National Institute of Child Health and Human Development has sponsored the Pediatric Formulation Initiative. The goal of this ongoing initiative is to address the issues and concnerns associated with pediatric therapeutics by convening groups of researchers and experts in pediatric formulations from academia, pharmaceutical companies, the National Institutes of Health, and the U.S. Food and Drug Administration.

  14. Hypertension Knowledge-Level Scale (HK-LS: A Study on Development, Validity and Reliability

    Directory of Open Access Journals (Sweden)

    Cemalettin Kalyoncu

    2012-03-01

    Full Text Available This study was conducted to develop a scale to measure knowledge about hypertension among Turkish adults. The Hypertension Knowledge-Level Scale (HK-LS was generated based on content, face, and construct validity, internal consistency, test re-test reliability, and discriminative validity procedures. The final scale had 22 items with six sub-dimensions. The scale was applied to 457 individuals aged ≥18 years, and 414 of them were re-evaluated for test-retest reliability. The six sub-dimensions encompassed 60.3% of the total variance. Cronbach alpha coefficients were 0.82 for the entire scale and 0.92, 0.59, 0.67, 0.77, 0.72, and 0.76 for the sub-dimensions of definition, medical treatment, drug compliance, lifestyle, diet, and complications, respectively. The scale ensured internal consistency in reliability and construct validity, as well as stability over time. Significant relationships were found between knowledge score and age, gender, educational level, and history of hypertension of the participants. No correlation was found between knowledge score and working at an income-generating job. The present scale, developed to measure the knowledge level of hypertension among Turkish adults, was found to be valid and reliable.

  15. Hypertension Knowledge-Level Scale (HK-LS): a study on development, validity and reliability.

    Science.gov (United States)

    Erkoc, Sultan Baliz; Isikli, Burhanettin; Metintas, Selma; Kalyoncu, Cemalettin

    2012-03-01

    This study was conducted to develop a scale to measure knowledge about hypertension among Turkish adults. The Hypertension Knowledge-Level Scale (HK-LS) was generated based on content, face, and construct validity, internal consistency, test re-test reliability, and discriminative validity procedures. The final scale had 22 items with six sub-dimensions. The scale was applied to 457 individuals aged ≥ 18 years, and 414 of them were re-evaluated for test-retest reliability. The six sub-dimensions encompassed 60.3% of the total variance. Cronbach alpha coefficients were 0.82 for the entire scale and 0.92, 0.59, 0.67, 0.77, 0.72, and 0.76 for the sub-dimensions of definition, medical treatment, drug compliance, lifestyle, diet, and complications, respectively. The scale ensured internal consistency in reliability and construct validity, as well as stability over time. Significant relationships were found between knowledge score and age, gender, educational level, and history of hypertension of the participants. No correlation was found between knowledge score and working at an income-generating job. The present scale, developed to measure the knowledge level of hypertension among Turkish adults, was found to be valid and reliable.

  16. Multinomial-exponential reliability function: a software reliability model

    International Nuclear Information System (INIS)

    Saiz de Bustamante, Amalio; Saiz de Bustamante, Barbara

    2003-01-01

    The multinomial-exponential reliability function (MERF) was developed during a detailed study of the software failure/correction processes. Later on MERF was approximated by a much simpler exponential reliability function (EARF), which keeps most of MERF mathematical properties, so the two functions together makes up a single reliability model. The reliability model MERF/EARF considers the software failure process as a non-homogeneous Poisson process (NHPP), and the repair (correction) process, a multinomial distribution. The model supposes that both processes are statistically independent. The paper discusses the model's theoretical basis, its mathematical properties and its application to software reliability. Nevertheless it is foreseen model applications to inspection and maintenance of physical systems. The paper includes a complete numerical example of the model application to a software reliability analysis

  17. Development and initial evaluation of the SCI-FI/AT.

    Science.gov (United States)

    Jette, Alan M; Slavin, Mary D; Ni, Pengsheng; Kisala, Pamela A; Tulsky, David S; Heinemann, Allen W; Charlifue, Susie; Tate, Denise G; Fyffe, Denise; Morse, Leslie; Marino, Ralph; Smith, Ian; Williams, Steve

    2015-05-01

    To describe the domain structure and calibration of the Spinal Cord Injury Functional Index for samples using Assistive Technology (SCI-FI/AT) and report the initial psychometric properties of each domain. Cross sectional survey followed by computerized adaptive test (CAT) simulations. Inpatient and community settings. A sample of 460 adults with traumatic spinal cord injury (SCI) stratified by level of injury, completeness of injury, and time since injury. None SCI-FI/AT RESULTS: Confirmatory factor analysis (CFA) and Item response theory (IRT) analyses identified 4 unidimensional SCI-FI/AT domains: Basic Mobility (41 items) Self-care (71 items), Fine Motor Function (35 items), and Ambulation (29 items). High correlations of full item banks with 10-item simulated CATs indicated high accuracy of each CAT in estimating a person's function, and there was high measurement reliability for the simulated CAT scales compared with the full item bank. SCI-FI/AT item difficulties in the domains of Self-care, Fine Motor Function, and Ambulation were less difficult than the same items in the original SCI-FI item banks. With the development of the SCI-FI/AT, clinicians and investigators have available multidimensional assessment scales that evaluate function for users of AT to complement the scales available in the original SCI-FI.

  18. Development and Initial Psychometrics of Counseling Supervisor's Behavior Questionnaire

    Science.gov (United States)

    Lee, Ahram; Park, Eun Hye; Byeon, Eunji; Lee, Sang Min

    2016-01-01

    This study describes the development and psychometric properties of the Counseling Supervisor's Behavior Questionnaire, designed to assess the specific behaviors of supervisors, which can be observed by supervisees during supervision sessions. Factor structure, construct and concurrent validity, and internal consistency reliability of the…

  19. Assessing communication quality of consultations in primary care: initial reliability of the Global Consultation Rating Scale, based on the Calgary-Cambridge Guide to the Medical Interview.

    Science.gov (United States)

    Burt, Jenni; Abel, Gary; Elmore, Natasha; Campbell, John; Roland, Martin; Benson, John; Silverman, Jonathan

    2014-03-06

    To investigate initial reliability of the Global Consultation Rating Scale (GCRS: an instrument to assess the effectiveness of communication across an entire doctor-patient consultation, based on the Calgary-Cambridge guide to the medical interview), in simulated patient consultations. Multiple ratings of simulated general practitioner (GP)-patient consultations by trained GP evaluators. UK primary care. 21 GPs and six trained GP evaluators. GCRS score. 6 GP raters used GCRS to rate randomly assigned video recordings of GP consultations with simulated patients. Each of the 42 consultations was rated separately by four raters. We considered whether a fixed difference between scores had the same meaning at all levels of performance. We then examined the reliability of GCRS using mixed linear regression models. We augmented our regression model to also examine whether there were systematic biases between the scores given by different raters and to look for possible order effects. Assessing the communication quality of individual consultations, GCRS achieved a reliability of 0.73 (95% CI 0.44 to 0.79) for two raters, 0.80 (0.54 to 0.85) for three and 0.85 (0.61 to 0.88) for four. We found an average difference of 1.65 (on a 0-10 scale) in the scores given by the least and most generous raters: adjusting for this evaluator bias increased reliability to 0.78 (0.53 to 0.83) for two raters; 0.85 (0.63 to 0.88) for three and 0.88 (0.69 to 0.91) for four. There were considerable order effects, with later consultations (after 15-20 ratings) receiving, on average, scores more than one point higher on a 0-10 scale. GCRS shows good reliability with three raters assessing each consultation. We are currently developing the scale further by assessing a large sample of real-world consultations.

  20. Reliability of a Retail Food Store Survey and Development of an Accompanying Retail Scoring System to Communicate Survey Findings and Identify Vendors for Healthful Food and Marketing Initiatives

    Science.gov (United States)

    Ghirardelli, Alyssa; Quinn, Valerie; Sugerman, Sharon

    2011-01-01

    Objective: To develop a retail grocery instrument with weighted scoring to be used as an indicator of the food environment. Participants/Setting: Twenty six retail food stores in low-income areas in California. Intervention: Observational. Main Outcome Measure(s): Inter-rater reliability for grocery store survey instrument. Description of store…

  1. Reliability and maintainability assessment factors for reliable fault-tolerant systems

    Science.gov (United States)

    Bavuso, S. J.

    1984-01-01

    A long term goal of the NASA Langley Research Center is the development of a reliability assessment methodology of sufficient power to enable the credible comparison of the stochastic attributes of one ultrareliable system design against others. This methodology, developed over a 10 year period, is a combined analytic and simulative technique. An analytic component is the Computer Aided Reliability Estimation capability, third generation, or simply CARE III. A simulative component is the Gate Logic Software Simulator capability, or GLOSS. The numerous factors that potentially have a degrading effect on system reliability and the ways in which these factors that are peculiar to highly reliable fault tolerant systems are accounted for in credible reliability assessments. Also presented are the modeling difficulties that result from their inclusion and the ways in which CARE III and GLOSS mitigate the intractability of the heretofore unworkable mathematics.

  2. Development and Reliability Testing of a Fast-Food Restaurant Observation Form.

    Science.gov (United States)

    Rimkus, Leah; Ohri-Vachaspati, Punam; Powell, Lisa M; Zenk, Shannon N; Quinn, Christopher M; Barker, Dianne C; Pugach, Oksana; Resnick, Elissa A; Chaloupka, Frank J

    2015-01-01

    To develop a reliable observational data collection instrument to measure characteristics of the fast-food restaurant environment likely to influence consumer behaviors, including product availability, pricing, and promotion. The study used observational data collection. Restaurants were in the Chicago Metropolitan Statistical Area. A total of 131 chain fast-food restaurant outlets were included. Interrater reliability was measured for product availability, pricing, and promotion measures on a fast-food restaurant observational data collection instrument. Analysis was done with Cohen's κ coefficient and proportion of overall agreement for categorical variables and intraclass correlation coefficient (ICC) for continuous variables. Interrater reliability, as measured by average κ coefficient, was .79 for menu characteristics, .84 for kids' menu characteristics, .92 for food availability and sizes, .85 for beverage availability and sizes, .78 for measures on the availability of nutrition information,.75 for characteristics of exterior advertisements, and .62 and .90 for exterior and interior characteristics measures, respectively. For continuous measures, average ICC was .88 for food pricing measures, .83 for beverage prices, and .65 for counts of exterior advertisements. Over 85% of measures demonstrated substantial or almost perfect agreement. Although some measures required revision or protocol clarification, results from this study suggest that the instrument may be used to reliably measure the fast-food restaurant environment.

  3. Integrated Markov-neural reliability computation method: A case for multiple automated guided vehicle system

    International Nuclear Information System (INIS)

    Fazlollahtabar, Hamed; Saidi-Mehrabad, Mohammad; Balakrishnan, Jaydeep

    2015-01-01

    This paper proposes an integrated Markovian and back propagation neural network approaches to compute reliability of a system. While states of failure occurrences are significant elements for accurate reliability computation, Markovian based reliability assessment method is designed. Due to drawbacks shown by Markovian model for steady state reliability computations and neural network for initial training pattern, integration being called Markov-neural is developed and evaluated. To show efficiency of the proposed approach comparative analyses are performed. Also, for managerial implication purpose an application case for multiple automated guided vehicles (AGVs) in manufacturing networks is conducted. - Highlights: • Integrated Markovian and back propagation neural network approach to compute reliability. • Markovian based reliability assessment method. • Managerial implication is shown in an application case for multiple automated guided vehicles (AGVs) in manufacturing networks

  4. Flexible, reliable software using patterns and agile development

    CERN Document Server

    Christensen, Henrik B

    2010-01-01

    …This book brings together a careful selection of topics that are relevant, indeed crucial, for developing good quality software with a carefully designed pedagogy that leads the reader through an experience of active learning. The emphasis in the content is on practical goals-how to construct reliable and flexible software systems-covering many topics that every software engineer should have studied. The emphasis in the method is on providing a practical context, hands-on projects, and guidance on process. … The text discusses not only what the end product should be like, but also how to get

  5. Establishing reliable good initial quantum efficiency and in-situ laser cleaning for the copper cathodes in the RF gun

    Energy Technology Data Exchange (ETDEWEB)

    Zhou, F., E-mail: zhoufeng@slac.stanford.edu; Sheppard, J.C.; Vecchione, T.; Jongewaard, E.; Brachmann, A.; Corbett, J.; Gilevich, S.; Weathersby, S.

    2015-05-21

    Establishing good initial quantum efficiency (QE) and reliable in-situ cleaning for copper cathode in the RF gun is of critical importance for the RF gun operations. Recent studies on the SLAC RF gun test bed indicated that the pre-cleaning (plasma cleaning) in the test chamber followed by copper cathode exposure to air for cathode change leads to a very low initial QE in the RF gun, and also demonstrated that without the pre-cleaning good initial QE >4×10{sup −5} can be routinely achieved in the RF gun with the cathodes of QE <1×10{sup −7} measured in the test chamber. QE can decay over the time in the RF gun. The in-situ laser cleaning technique for copper cathodes in the RF gun is established and refined in comparison to previous cleaning at the linac coherent light source, resulting in an improved QE and emittance evolutions. The physics of the laser cleaning process is discussed. It is believed that the reflectivity change is one of the major factors for the QE boost with the laser cleaning.

  6. Calculating system reliability with SRFYDO

    Energy Technology Data Exchange (ETDEWEB)

    Morzinski, Jerome [Los Alamos National Laboratory; Anderson - Cook, Christine M [Los Alamos National Laboratory; Klamann, Richard M [Los Alamos National Laboratory

    2010-01-01

    SRFYDO is a process for estimating reliability of complex systems. Using information from all applicable sources, including full-system (flight) data, component test data, and expert (engineering) judgment, SRFYDO produces reliability estimates and predictions. It is appropriate for series systems with possibly several versions of the system which share some common components. It models reliability as a function of age and up to 2 other lifecycle (usage) covariates. Initial output from its Exploratory Data Analysis mode consists of plots and numerical summaries so that the user can check data entry and model assumptions, and help determine a final form for the system model. The System Reliability mode runs a complete reliability calculation using Bayesian methodology. This mode produces results that estimate reliability at the component, sub-system, and system level. The results include estimates of uncertainty, and can predict reliability at some not-too-distant time in the future. This paper presents an overview of the underlying statistical model for the analysis, discusses model assumptions, and demonstrates usage of SRFYDO.

  7. Developing Reliable Telemedicine Platforms with Unreliable and Limited Communication Bandwidth

    Science.gov (United States)

    2017-10-01

    AFRL-SA-WP-TR-2017-0019 Developing Reliable Telemedicine Platforms with Unreliable and Limited Communication Bandwidth Peter F...Wright-Patterson AFB, OH 45433-7913 DISTRIBUTION STATEMENT A. Approved for public release. Distribution is unlimited. STINFO COPY NOTICE AND...invention that may relate to them. Qualified requestors may obtain copies of this report from the Defense Technical Information Center (DTIC) (http

  8. Development of Chinese Military Personnel Social Support Scale and tests for its reliability and validity

    Directory of Open Access Journals (Sweden)

    Kai-hong TANG

    2013-01-01

    Full Text Available Objective  To develop Chinese Military Personnel Social Support Scaleand verify its reliability and validity. Methods  The Chinese Military Personnel Social Support Scalewas initiated, organized and compiled based upon open-ended questionnaire survey done in a systematic manner, and previous researches were taken as references. A total of 630 military personnel were chosen by random cluster sampling and tested with the Scale, among them 50 were tested with Social Support Rating Scale(SSRS and Chinese Military Psychosomatic Health Scale(CMPHS simultaneously, and the test was done solely a second time with CMPHS 2 weeks later. The reliability and validity were assessed and verified by exploratory factor analysis, confirmatory factor analysis and correlation analysis. Results  The Chinese Military Personnel Social Support Scalecomprised three factors, namely subjective support, objective support and utility of social support. Eighteen items were left in official scale after amendment by factor analysis, and one lying subscale was added. The correlation coefficients between the public factors ranged from 0.477 to 0.589 (P<0.01, and the correlation coefficients between factors and total scale ranged from 0.721 to 0.823 (P<0.01. The test-retest correlation coefficients of total scale and subscales ranged from 0.622 to 0.803 (P<0.01, the Cronbach α coefficients ranged from 0.624 to 0.874, and the split-half correlation coefficients ranged from 0.551 to 0.828. Significant correlation existed between this Scale and two criterion scales, namely SSRS and CMPHS. Conclusion  It is verified that the Chinese Military Personnel Social Support Scalehas excellent reliability and validity, and complying with psychometric standards, it may be used to evaluate the social support level of Chinese military personnel.

  9. Human reliability

    International Nuclear Information System (INIS)

    Embrey, D.E.

    1987-01-01

    Concepts and techniques of human reliability have been developed and are used mostly in probabilistic risk assessment. For this, the major application of human reliability assessment has been to identify the human errors which have a significant effect on the overall safety of the system and to quantify the probability of their occurrence. Some of the major issues within human reliability studies are reviewed and it is shown how these are applied to the assessment of human failures in systems. This is done under the following headings; models of human performance used in human reliability assessment, the nature of human error, classification of errors in man-machine systems, practical aspects, human reliability modelling in complex situations, quantification and examination of human reliability, judgement based approaches, holistic techniques and decision analytic approaches. (UK)

  10. View all initiatives | IDRC - International Development Research ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    The International Research Chairs Initiative pairs top research talent from universities in Canada with their counterparts in developing countries to address key development challenges. We fund researchers driving global change. Careers · Contact Us · Subscribe · Unsubscribe · Site map. Follow us; Facebook · Twitter ...

  11. IEEE guide for the analysis of human reliability

    International Nuclear Information System (INIS)

    Dougherty, E.M. Jr.

    1987-01-01

    The Institute of Electrical and Electronics Engineers (IEEE) working group 7.4 of the Human Factors and Control Facilities Subcommittee of the Nuclear Power Engineering Committee (NPEC) has released its fifth draft of a Guide for General Principles of Human Action Reliability Analysis for Nuclear Power Generating Stations, for approval of NPEC. A guide is the least mandating in the IEEE hierarchy of standards. The purpose is to enhance the performance of an human reliability analysis (HRA) as a part of a probabilistic risk assessment (PRA), to assure reproducible results, and to standardize documentation. The guide does not recommend or even discuss specific techniques, which are too rapidly evolving today. Considerable maturation in the analysis of human reliability in a PRA context has taken place in recent years. The IEEE guide on this subject is an initial step toward bringing HRA out of the research and development arena into the toolbox of standard engineering practices

  12. Some recent developments in the risk- and reliability analysis of structures

    International Nuclear Information System (INIS)

    Bauer, J.; Choi, H.S.; Kappler, H.; Melzer, H.J.; Panggabean, H.; Reichmann, K.H.; Schueller, G.I.; Schwarz, R.F.

    1979-01-01

    This report consists of six contributions divided into four general topics. While Part I concentrates on the development of Analytical Methods in Structural Reliability, Part II to IV are devoted to the application of these methods to Offshore-, Nuclear - and generally to Wind- and Earthquake Exposed Structures. (orig.) [de

  13. Reliability analysis techniques for the design engineer

    International Nuclear Information System (INIS)

    Corran, E.R.; Witt, H.H.

    1980-01-01

    A fault tree analysis package is described that eliminates most of the housekeeping tasks involved in proceeding from the initial construction of a fault tree to the final stage of presenting a reliability analysis in a safety report. It is suitable for designers with relatively little training in reliability analysis and computer operation. Users can rapidly investigate the reliability implications of various options at the design stage, and evolve a system which meets specified reliability objectives. Later independent review is thus unlikely to reveal major shortcomings necessitating modification and projects delays. The package operates interactively allowing the user to concentrate on the creative task of developing the system fault tree, which may be modified and displayed graphically. For preliminary analysis system data can be derived automatically from a generic data bank. As the analysis procedes improved estimates of critical failure rates and test and maintenance schedules can be inserted. The computations are standard, - identification of minimal cut-sets, estimation of reliability parameters, and ranking of the effect of the individual component failure modes and system failure modes on these parameters. The user can vary the fault trees and data on-line, and print selected data for preferred systems in a form suitable for inclusion in safety reports. A case history is given - that of HIFAR containment isolation system. (author)

  14. Development of Creative Behavior Observation Form: A Study on Validity and Reliability

    Science.gov (United States)

    Dere, Zeynep; Ömeroglu, Esra

    2018-01-01

    This study, Creative Behavior Observation Form was developed to assess creativity of the children. While the study group on the reliability and validity of Creative Behavior Observation Form was being developed, 257 children in total who were at the ages of 5-6 were used as samples with stratified sampling method. Content Validity Index (CVI) and…

  15. Hypertension Knowledge-Level Scale (HK-LS): A Study on Development, Validity and Reliability

    OpenAIRE

    Erkoc, Sultan Baliz; Isikli, Burhanettin; Metintas, Selma; Kalyoncu, Cemalettin

    2012-01-01

    This study was conducted to develop a scale to measure knowledge about hypertension among Turkish adults. The Hypertension Knowledge-Level Scale (HK-LS) was generated based on content, face, and construct validity, internal consistency, test re-test reliability, and discriminative validity procedures. The final scale had 22 items with six sub-dimensions. The scale was applied to 457 individuals aged ≥18 years, and 414 of them were re-evaluated for test-retest reliability. The six sub-dimensio...

  16. The Ramakrishna Mission economic PV development initiative

    Energy Technology Data Exchange (ETDEWEB)

    Stone, J.L.; Ullal, H.S. [National Renewable Energy Lab., Golden, CO (United States); Sherring, C. [Sherring Energy Associates, Princeton, NJ (United States)

    1998-09-01

    India is the world`s second most populous country, quickly approaching one billion persons. Although it has a well-developed electricity grid, many of the people have little or no access to electricity and all of the benefits associated with it. There are areas that are isolated from the grid and will not be connected for many years, if ever. One such area is the Sundarbans located in the delta region of the two great rivers, the Ganges and Brahmaputra, partially in India and partially in Bangladesh. It is estimated that 1.5 million people live in this area, crisscrossed by many islands and rivers, who have only marginal supplies of electricity generated primarily from diesel generators and batteries. Working with the regional non-governmental organization (NGO), the Ramakrishna Mission, and the West Bengal Renewable Energy Development Agency, the governments of India and the US initiated a rural electrification initiative to demonstrate the economic and technical feasibility of photovoltaics to provide limited supplies of electricity for such applications as solar home lighting systems (SHS), water pumping, vaccine refrigeration, communications, and economic development activities. This paper details initial results from approximately 30 kilowatts of PV systems installed in the area, including socio-economic impacts and technical performance.

  17. Interrater reliability assessment using the Test of Gross Motor Development-2.

    Science.gov (United States)

    Barnett, Lisa M; Minto, Christine; Lander, Natalie; Hardy, Louise L

    2014-11-01

    The aim was to examine interrater reliability of the object control subtest from the Test of Gross Motor Development-2 by live observation in a school field setting. Reliability Study--cross sectional. Raters were rated on their ability to agree on (1) the raw total for the six object control skills; (2) each skill performance and (3) the skill components. Agreement for the object control subtest and the individual skills was assessed by an intraclass correlation (ICC) and a kappa statistic assessed for skill component agreement. A total of 37 children (65% girls) aged 4-8 years (M = 6.2, SD = 0.8) were assessed in six skills by two raters; equating to 222 skill tests. Interrater reliability was excellent for the object control subset (ICC = 0.93), and for individual skills, highest for the dribble (ICC = 0.94) followed by strike (ICC = 0.85), overhand throw (ICC = 0.84), underhand roll (ICC = 0.82), kick (ICC = 0.80) and the catch (ICC = 0.71). The strike and the throw had more components with less agreement. Even though the overall subtest score and individual skill agreement was good, some skill components had lower agreement, suggesting these may be more problematic to assess. This may mean some skill components need to be specified differently in order to improve component reliability. Crown Copyright © 2013. Published by Elsevier Ltd. All rights reserved.

  18. Allied health clinicians using translational research in action to develop a reliable stroke audit tool.

    Science.gov (United States)

    Abery, Philip; Kuys, Suzanne; Lynch, Mary; Low Choy, Nancy

    2018-05-23

    To design and establish reliability of a local stroke audit tool by engaging allied health clinicians within a privately funded hospital. Design: Two-stage study involving a modified Delphi process to inform stroke audit tool development and inter-tester reliability. Allied health clinicians. A modified Delphi process to select stroke guideline recommendations for inclusion in the audit tool. Reliability study: 1 allied health representative from each discipline audited 10 clinical records with sequential admissions to acute and rehabilitation services. Recommendations were admitted to the audit tool when 70% agreement was reached, with 50% set as the reserve agreement. Inter-tester reliability was determined using intra-class correlation coefficients (ICCs) across 10 clinical records. Twenty-two participants (92% female, 50% physiotherapists, 17% occupational therapists) completed the modified Delphi process. Across 6 voting rounds, 8 recommendations reached 70% agreement and 2 reached 50% agreement. Two recommendations (nutrition/hydration; goal setting) were added to ensure representation for all disciplines. Substantial consistency across raters was established for the audit tool applied in acute stroke (ICC .71; range .48 to .90) and rehabilitation (ICC.78; range .60 to .93) services. Allied health clinicians within a privately funded hospital generally agreed in an audit process to develop a reliable stroke audit tool. Allied health clinicians agreed on stroke guideline recommendations to inform a stroke audit tool. The stroke audit tool demonstrated substantial consistency supporting future use for service development. This process, which engages local clinicians, could be adopted by other facilities to design reliable audit tools to identify local service gaps to inform changes to clinical practice. © 2018 John Wiley & Sons, Ltd.

  19. Continuing Development and Initial Validation of a Questionnaire to Measure Sonographer Skill-Teaching Perceptions in Clinical Practice

    Directory of Open Access Journals (Sweden)

    Delwyn Nicholls

    2017-06-01

    Conclusion: Results indicate that the SonoSTePs instrument items and factors are underpinned by theories and principles related to teaching a complex psychomotor skill. The initial data suggest that the tool is both reliable and valid.

  20. Prediction of safety critical software operational reliability from test reliability using testing environment factors

    International Nuclear Information System (INIS)

    Jung, Hoan Sung; Seong, Poong Hyun

    1999-01-01

    It has been a critical issue to predict the safety critical software reliability in nuclear engineering area. For many years, many researches have focused on the quantification of software reliability and there have been many models developed to quantify software reliability. Most software reliability models estimate the reliability with the failure data collected during the test assuming that the test environments well represent the operation profile. User's interest is however on the operational reliability rather than on the test reliability. The experiences show that the operational reliability is higher than the test reliability. With the assumption that the difference in reliability results from the change of environment, from testing to operation, testing environment factors comprising the aging factor and the coverage factor are developed in this paper and used to predict the ultimate operational reliability with the failure data in testing phase. It is by incorporating test environments applied beyond the operational profile into testing environment factors. The application results show that the proposed method can estimate the operational reliability accurately. (Author). 14 refs., 1 tab., 1 fig

  1. DEVELOPING VISUAL PRESENTATION ATTITUDE RUBRIC: VALIDITY AND RELIABILITY STUDY

    OpenAIRE

    ATEŞ, Hatice KADIOĞLU; ADA, Sefer; BAYSAL, Z. Nurdan

    2015-01-01

    Abstract The aim of this study is to develop visual presentation attitude rubric which is valid and reliable for the 4th grade students. 218 students took part in this study from Engin Can Güre which located in Istanbul, Esenler. While preparing this assessment tool with 34 criterias , 6 university lecturers view have been taken who are experts in their field. The answer key sheet has 4 (likert )type options. The rubric has been first tested by Kaiser-Meyer Olkin and Bartletts tests an...

  2. Development and Reliability Analysis of HTR-PM Reactor Protection System

    International Nuclear Information System (INIS)

    Li Duo; Guo Chao; Xiong Huasheng

    2014-01-01

    High Temperature Gas-Cooled Reactor-Pebble bed Module (HTR-PM) digital Reactor Protection System (RPS) is a dedicated system, which is designed and developed according to HTR-PM NPP protection specifications. To decrease the probability of accident trips and increase the system reliability, HTR-PM RPS has such features as a framework of four redundant channels, two diverse sub-systems in each channel, and two level two-out-of-four logic voters. Reliability analysis of HTR-PM RPS is based on fault tree model. A fault tree is built based on HTR-PM RPS Failure Modes and Effects Analysis (FMEA), and special analysis is focused on the sub-tree of redundant channel ''2-out-of-4'' logic and the fault tree under one channel is bypassed. The qualitative analysis of fault tree, such as RPS weakness according to minimal cut sets, is summarized in the paper. (author)

  3. Reliability analysis - systematic approach based on limited data

    International Nuclear Information System (INIS)

    Bourne, A.J.

    1975-11-01

    The initial approaches required for reliability analysis are outlined. These approaches highlight the system boundaries, examine the conditions under which the system is required to operate, and define the overall performance requirements. The discussion is illustrated by a simple example of an automatic protective system for a nuclear reactor. It is then shown how the initial approach leads to a method of defining the system, establishing performance parameters of interest and determining the general form of reliability models to be used. The overall system model and the availability of reliability data at the system level are next examined. An iterative process is then described whereby the reliability model and data requirements are systematically refined at progressively lower hierarchic levels of the system. At each stage, the approach is illustrated with examples from the protective system previously described. The main advantages of the approach put forward are the systematic process of analysis, the concentration of assessment effort in the critical areas and the maximum use of limited reliability data. (author)

  4. Development and Reliability of a Preliminary Foot Osteoarthritis Magnetic Resonance Imaging Score.

    Science.gov (United States)

    Halstead, Jill; Martín-Hervás, Carmen; Hensor, Elizabeth M A; McGonagle, Dennis; Keenan, Anne-Maree; Redmond, Anthony C; Conaghan, Philip G

    2017-08-01

    Foot osteoarthritis (OA) is very common but underinvestigated musculoskeletal condition and there is little consensus as to common magnetic resonance imaging (MRI) features. The aim of this study was to develop a preliminary foot OA MRI score (FOAMRIS) and evaluate its reliability. This preliminary semiquantitative score included the hindfoot, midfoot, and metatarsophalangeal joints. Joints were scored for joint space narrowing (JSN; 0-3), osteophytes (0-3), joint effusion/synovitis, and bone cysts (present/absent). Erosions and bone marrow lesions (BML) were scored (0-3) and BML were evaluated adjacent to entheses and at sub-tendon sites (present/absent). Additionally, tenosynovitis (0-3) and midfoot ligament pathology (present/absent) were scored. Reliability was evaluated in 15 people with foot pain and MRI-detected OA using 3.0T MRI multi-sequence protocols, and assessed using ICC as an overall score and per anatomical site. Intrareader agreement (ICC) was generally good to excellent across the foot in joint features (JSN 0.90, osteophytes 0.90, effusion/synovitis 0.46, cysts 0.87), bone features (BML 0.83, erosion 0.66, BML entheses 0.66, BML sub-tendon 0.60) and soft tissue features (tenosynovitis 0.83, ligaments 0.77). Interreader agreement was lower for joint features (JSN 0.43, osteophytes 0.27, effusion/synovitis 0.02, cysts 0.48), bone features (BML 0.68, erosion 0.00, BML entheses 0.34, BML sub-tendon 0.13), and soft tissue features (tenosynovitis 0.35, ligaments 0.33). This preliminary FOAMRIS demonstrated good intrareader reliability and fair interreader reliability when assessing the total feature scores. Further development is required in cohorts with a range of pathologies and to assess the psychometric measurement properties.

  5. The Development of a GaAs MMIC Reliability and Space Qualification Guide

    Science.gov (United States)

    Ponchak, G.; Kayali, S.; Huang, H-C.

    1994-01-01

    This paper discusses the need for a space qualification guide, provides a brief description of some common GaAs failure mechanisms, the approach that the NASA MMIC Reliability Assurance Program is following to develop the guide, and the status of the program.

  6. Initial performance of the PIGMI prototype

    International Nuclear Information System (INIS)

    Stovall, J.E.

    1979-01-01

    The PIGMI (Pion Generator for Medical Irradiations) program at LASL is an accelerator development program aimed at completing the design of an accelerator suitable for use as a pion generator in a hospital-based radiotherapy program. The major thrust of the program has been the design of a 7 MeV prototype accelerator which emphasizes compactness, economy of construction, and operation and reliability. To achieve these goals the design of the prototype has exploited a number of innovations in proton linac technology. An overview of the program discussing the major innovative features of the prototype is presented. The initial operating experience is discussed and initial performance measurements are presented

  7. Development of component reliability data for PSA and risk based management in Japan

    International Nuclear Information System (INIS)

    Yoshihiro Tomioka; Mitsumasa Hirano; Shunsuke Kondo

    1997-01-01

    The author presents the outline of development of the component reliability data for PSA and risk based management in Japan. In the first part following the introduction, the development process is described. The next part describes issues discussed in the course of the development, which are treatment of zero failure data, error factor, estimation of unavailable failure rate and integral test

  8. Finite element reliability analysis of fatigue life

    International Nuclear Information System (INIS)

    Harkness, H.H.; Belytschko, T.; Liu, W.K.

    1992-01-01

    Fatigue reliability is addressed by the first-order reliability method combined with a finite element method. Two-dimensional finite element models of components with cracks in mode I are considered with crack growth treated by the Paris law. Probability density functions of the variables affecting fatigue are proposed to reflect a setting where nondestructive evaluation is used, and the Rosenblatt transformation is employed to treat non-Gaussian random variables. Comparisons of the first-order reliability results and Monte Carlo simulations suggest that the accuracy of the first-order reliability method is quite good in this setting. Results show that the upper portion of the initial crack length probability density function is crucial to reliability, which suggests that if nondestructive evaluation is used, the probability of detection curve plays a key role in reliability. (orig.)

  9. Engineering Design Handbook: Development Guide for Reliability. Part Three. Reliability Prediction

    Science.gov (United States)

    1976-01-01

    to t is pa(t)=l-qa(t) (10-6) This is the reliability of being closed, defined for this interval. 2 The probability that a contact viH be open...Monte Carlo simulation. Few people can know all about all available programs. Special- ists can assist in selecting a few from the avail- able many

  10. Assessing communication quality of consultations in primary care: initial reliability of the Global Consultation Rating Scale, based on the Calgary-Cambridge Guide to the Medical Interview

    Science.gov (United States)

    Burt, Jenni; Abel, Gary; Elmore, Natasha; Campbell, John; Roland, Martin; Benson, John; Silverman, Jonathan

    2014-01-01

    Objectives To investigate initial reliability of the Global Consultation Rating Scale (GCRS: an instrument to assess the effectiveness of communication across an entire doctor–patient consultation, based on the Calgary-Cambridge guide to the medical interview), in simulated patient consultations. Design Multiple ratings of simulated general practitioner (GP)–patient consultations by trained GP evaluators. Setting UK primary care. Participants 21 GPs and six trained GP evaluators. Outcome measures GCRS score. Methods 6 GP raters used GCRS to rate randomly assigned video recordings of GP consultations with simulated patients. Each of the 42 consultations was rated separately by four raters. We considered whether a fixed difference between scores had the same meaning at all levels of performance. We then examined the reliability of GCRS using mixed linear regression models. We augmented our regression model to also examine whether there were systematic biases between the scores given by different raters and to look for possible order effects. Results Assessing the communication quality of individual consultations, GCRS achieved a reliability of 0.73 (95% CI 0.44 to 0.79) for two raters, 0.80 (0.54 to 0.85) for three and 0.85 (0.61 to 0.88) for four. We found an average difference of 1.65 (on a 0–10 scale) in the scores given by the least and most generous raters: adjusting for this evaluator bias increased reliability to 0.78 (0.53 to 0.83) for two raters; 0.85 (0.63 to 0.88) for three and 0.88 (0.69 to 0.91) for four. There were considerable order effects, with later consultations (after 15–20 ratings) receiving, on average, scores more than one point higher on a 0–10 scale. Conclusions GCRS shows good reliability with three raters assessing each consultation. We are currently developing the scale further by assessing a large sample of real-world consultations. PMID:24604483

  11. Sense of competence in dementia care staff (SCIDS) scale: development, reliability, and validity.

    Science.gov (United States)

    Schepers, Astrid Kristine; Orrell, Martin; Shanahan, Niamh; Spector, Aimee

    2012-07-01

    Sense of competence in dementia care staff (SCIDS) may be associated with more positive attitudes to dementia among care staff and better outcomes for those being cared for. There is a need for a reliable and valid measure of sense of competence specific to dementia care staff. This study describes the development and evaluation of a measure to assess "sense of competence" in dementia care staff and reports on its psychometric properties. The systematic measure development process involved care staff and experts. For item selection and assessment of psychometric properties, a pilot study (N = 37) and a large-scale study (N = 211) with a test-retest reliability (N = 58) sub-study were undertaken. The final measure consists of 17 items across four subscales with acceptable to good internal consistency and moderate to substantial test-retest reliability. As predicted, the measure was positively associated with work experience, job satisfaction, and person-centered approaches to dementia care, giving a first indication for its validity. The SCIDS scale provides a useful and user-friendly means of measuring sense of competence in care staff. It has been developed using a robust process and has adequate psychometric properties. Further exploration of the construct and the scale's validity is warranted. It may be useful to assess the impact of training and perceived abilities and skills in dementia care.

  12. Reliability of the test of gross motor development second edition (TGMD-2) for Kindergarten children in Myanmar.

    Science.gov (United States)

    Aye, Thanda; Oo, Khin Saw; Khin, Myo Thuzar; Kuramoto-Ahuja, Tsugumi; Maruyama, Hitoshi

    2017-10-01

    [Purpose] The purpose of this study was to investigate reliability of the test of gross motor development second edition (TGMD-2) for Kindergarten children in Myanmar. [Subjects and Methods] Fifty healthy Kindergarten children (23 males, 27 females) whose parents/guardians had given written consent were participated. The subjects were explained and demonstrated all 12 gross motor skills of TGMD-2 before the assessment. Each subject individually performed two trials for each gross motor skill and the performance was video recorded. Three raters separately watched the video recordings and rated for inter-rater reliability. The second assessment was done one month later with 25 out of 50 subjects for test-rest reliability. The video recordings of 12 subjects were randomly selected from the first 50 recordings for intra-rater reliability six weeks after the first assessment. The agreement on the locomotor and object control raw scores and the gross motor quotient (GMQ) were calculated. [Results] The findings of all the reliability coefficients for the locomotor and object control raw scores and the GMQ were interpreted as good and excellent reliability. [Conclusion] The results represented that TGMD-2 is a highly reliable and appropriate assessment tool for assessing gross motor skill development of Kindergarten children in Myanmar.

  13. Development and initial evaluation of an enhanced measure of boundary flexibility for the work and family domains.

    Science.gov (United States)

    Matthews, Russell A; Barnes-Farrell, Janet L

    2010-07-01

    This manuscript reports the development of a measure of work and family domain boundary flexibility. Building on previous research, we propose an expanded definition of boundary flexibility that includes two components-flexibility-ability and flexibility-willingness-and we develop a measure designed to capture this more comprehensive definition of boundary flexibility. Flexibility-ability is conceptualized as an individual's perception of personal and situational constraints that affect boundary management, and flexibility-willingness is conceptualized as an individual difference variable that captures the motivation to engage in boundary flexing. An additional feature of domain boundaries, permeability, is also examined. Data are presented from two studies. Study 1 (N = 244) describes the development of a multiscale measure that extends current conceptual definitions of boundary flexibility. Study 2 (N = 225) describes the refinement and evaluation of this measure. Confirmatory factor analysis, reliability evidence, interscale correlations, and correlations with important work-family constructs (e.g., domain centrality, work-family conflict) provide initial construct validity evidence for the measure.

  14. Initial investigation into development of accelerated pavement evaluation (APE) vehicle

    CSIR Research Space (South Africa)

    Steyn, WJvdM

    2002-08-01

    Full Text Available n e n t d e f o r m a t i o n [ m m ] Test 1 Test 2 Test 3 Test 4 Initial indication of performance Indication of performance after traffic application TR-2003/9: Initial investigation into development of APE vehicle. 6 2... Restricted Contract Report Initial Investigation into Development of Accelerated Pavement Evaluation (APE) Vehicle. Author: WJvdM Steyn M de Beer PREPARED FOR: PREPARED BY: CSIR Transportek STEP CSIR Transportek PO...

  15. Towards an Operational Definition of Effective Co-Teaching: Instrument Development, Validity, and Reliability

    Science.gov (United States)

    La Monte, Michelle Evonne

    2012-01-01

    This study focused on developing a valid and reliable instrument that can not only identify successful co-teaching, but also the professional development needs of co-teachers and their administrators in public schools. Two general questions about the quality of co-teaching were addressed in this study: (a) How well did descriptors within each of…

  16. High-Reliability Health Care: Getting There from Here

    Science.gov (United States)

    Chassin, Mark R; Loeb, Jerod M

    2013-01-01

    Context Despite serious and widespread efforts to improve the quality of health care, many patients still suffer preventable harm every day. Hospitals find improvement difficult to sustain, and they suffer “project fatigue” because so many problems need attention. No hospitals or health systems have achieved consistent excellence throughout their institutions. High-reliability science is the study of organizations in industries like commercial aviation and nuclear power that operate under hazardous conditions while maintaining safety levels that are far better than those of health care. Adapting and applying the lessons of this science to health care offer the promise of enabling hospitals to reach levels of quality and safety that are comparable to those of the best high-reliability organizations. Methods We combined the Joint Commission's knowledge of health care organizations with knowledge from the published literature and from experts in high-reliability industries and leading safety scholars outside health care. We developed a conceptual and practical framework for assessing hospitals’ readiness for and progress toward high reliability. By iterative testing with hospital leaders, we refined the framework and, for each of its fourteen components, defined stages of maturity through which we believe hospitals must pass to reach high reliability. Findings We discovered that the ways that high-reliability organizations generate and maintain high levels of safety cannot be directly applied to today's hospitals. We defined a series of incremental changes that hospitals should undertake to progress toward high reliability. These changes involve the leadership's commitment to achieving zero patient harm, a fully functional culture of safety throughout the organization, and the widespread deployment of highly effective process improvement tools. Conclusions Hospitals can make substantial progress toward high reliability by undertaking several specific

  17. 75 FR 35021 - Reliability Standards Development and NERC and Regional Entity Enforcement; Notice of Technical...

    Science.gov (United States)

    2010-06-21

    ... Standards Development and NERC and Regional Entity Enforcement; Notice of Technical Conference June 15, 2010... Technical Conference to address industry perspectives on certain issues pertaining to the development and... Electric Reliability Organization's (ERO) standards development process; communication and interactions...

  18. Reliability data collection and use in risk and availability assessment

    International Nuclear Information System (INIS)

    Colombari, V.

    1989-01-01

    For EuReDatA it is a prevailing objective to initiate and support contact between experts, companies and institutions active in reliability engineering and research. Main topics of this 6th EuReDatA Conference are: Reliability data banks; incidents data banks; common cause data; source and propagation of uncertainties; computer aided risk analysis; reliability and incidents data acquisition and processing; human reliability; probabilistic safety and availability assessment; feedback of reliability into system design; data fusion; reliability modeling and techniques; structural and mechanical reliability; consequence modeling; software and electronic reliability; reliability tests. Some conference papers are separately indexed in the database. (HP)

  19. Reliability: How much is it worth? Beyond its estimation or prediction, the (net) present value of reliability

    International Nuclear Information System (INIS)

    Saleh, J.H.; Marais, K.

    2006-01-01

    In this article, we link an engineering concept, reliability, to a financial and managerial concept, net present value, by exploring the impact of a system's reliability on its revenue generation capability. The framework here developed for non-repairable systems quantitatively captures the value of reliability from a financial standpoint. We show that traditional present value calculations of engineering systems do not account for system reliability, thus over-estimate a system's worth and can therefore lead to flawed investment decisions. It is therefore important to involve reliability engineers upfront before investment decisions are made in technical systems. In addition, the analyses here developed help designers identify the optimal level of reliability that maximizes a system's net present value-the financial value reliability provides to the system minus the cost to achieve this level of reliability. Although we recognize that there are numerous considerations driving the specification of an engineering system's reliability, we contend that the financial analysis of reliability here developed should be made available to decision-makers to support in part, or at least be factored into, the system reliability specification

  20. Development of the design and reliability analysis of a seabed repository system

    International Nuclear Information System (INIS)

    1987-06-01

    This study examines the seabed repository scheme proposed in 1979 for the long term disposal of heat generating radio-active waste and develops it to a standard sufficient to compare its reliability with the drilled emplacement and penetrator schemes. The reinforced concrete repositories contain 324 waste canisters and weigh 982 tonnes fully loaded in water. The repositories are transported up to 6000 km to the disposal area by a special purpose ship and lowered 5.5 km to the seabed on six braided nylon ropes by traction winches. Reliability of the seabed repository system, measured in terms of accidents per year involving loss of one or more canisters, was comparable with the other systems. (author)

  1. Managing the uncertainty aspect of reliability in an iterative product development process

    NARCIS (Netherlands)

    Ganesh, N.

    2009-01-01

    This study identifies the design criteria for a method that can be used to manage the risk and uncertainty aspects of product reliability of Really New Innovations (RNI) in an Iterative Product Development Process (IPDP). It is based on 7 years of longitudinal research exploring more than 10

  2. Techniques for developing reliable and functional materials control and accounting software

    International Nuclear Information System (INIS)

    Barlich, G.

    1988-01-01

    The media has increasingly focused on failures of computer systems resulting in financial, material, and other losses and on systems failing to function as advertised. Unfortunately, such failures with equally disturbing losses are possible in computer systems providing materials control and accounting (MCandA) functions. Major improvements in the reliability and correctness of systems are possible with disciplined design and development techniques applied during software development. This paper describes some of the techniques used in the Safeguard Systems Group at Los Alamos National Laboratory for various MCandA systems

  3. Biofuel Development Initiatives in Sub-Saharan Africa: Opportunities and Challenges

    Directory of Open Access Journals (Sweden)

    Patrick T. Sekoai

    2016-06-01

    Full Text Available In recent years, biofuels have emerged as a suitable alternative to hydrocarbon fuel due to their foreseen potential of being a future energy resource. Biofuel development initiatives have been successfully implemented in countries like Brazil, United States of America, European Union, Canada, Australia, and Japan. However, such programmes have been stagnant in Africa due to various constraints, such as financial barriers, technical expertise, land availability, and government policies. Nonetheless, some countries within the continent have realized the potential of biofuels and have started to introduce similar programmes and initiatives for their development. These include the bioethanol production initiatives and the plantation of jatropha oil seeds in most Sub-Saharan African countries for biodiesel production. Therefore, this paper examines the biofuel development initiatives that have been implemented in several countries across Sub-Saharan Africa over the past few years. It also discusses the opportunities and challenges of having biofuel industries in the continent. Finally, it proposes some recommendations that could be applied to accelerate their development in these Sub-Saharan African countries.

  4. Assessing communication skills in dietetic consultations: the development of the reliable and valid DIET-COMMS tool.

    Science.gov (United States)

    Whitehead, K A; Langley-Evans, S C; Tischler, V A; Swift, J A

    2014-04-01

    There is an increasing emphasis on the development of communication skills for dietitians but few evidence-based assessment tools available. The present study aimed to develop a dietetic-specific, short, reliable and valid assessment tool for measuring communication skills in patient consultations: DIET-COMMS. A literature review and feedback from 15 qualified dietitians were used to establish face and content validity during the development of DIET-COMMS. In total, 113 dietetic students and qualified dietitians were video-recorded undertaking mock consultations, assessed using DIET-COMMS by the lead author, and used to establish intra-rater reliability, as well as construct and predictive validity. Twenty recorded consultations were reassessed by nine qualified dietitians to assess inter-rater reliability: eight of these assessors were interviewed to determine user evaluation. Significant improvements in DIET-COMMS scores were achieved as students and qualified staff progressed through their training and gained experience, demonstrating construct validity, and also by qualified staff attending a training course, indicating predictive validity (P skills in practice was questioned. DIET-COMMS is a short, user-friendly, reliable and valid tool for measuring communication skills in patient consultations with both pre- and post-registration dietitians. Additional work is required to develop a training package for assessors and to identify how DIET-COMMS assessment can acceptably be incorporated into practice. © 2013 The British Dietetic Association Ltd.

  5. Developing of Individual Instrument Performance Anxiety Scale: ValidityReliability Study

    Directory of Open Access Journals (Sweden)

    Esra DALKIRAN

    2016-07-01

    Full Text Available In this study, it is intended to develop a scale unique to our culture, concerning individual instrument performance anxiety of the students who are getting instrument training in the Department of Music Education. In the study, the descriptive research model is used and qualitative research techniques are utilized. The study population consists of the students attending the 23 universities which has Music Education Department. The sample of the study consists of 438 girls and 312 boys, totally 750 students who are studying in the Department of Music Education of randomly selected 10 universities. As a result of the explanatory and confirmatory factor analyses that were performed, a onedimensional structure consisting of 14 items was obtained. Also, t-scores and the coefficient scores of total item correlation concerning the distinguishing power of the items, the difference in the scores of the set of lower and upper 27% was calculated, and it was observed that the items are distinguishing as a result of both analyses. Of the scale, Cronbach's alpha coefficient of internal consistency was calculated as .94, and test-retest reliability coefficient was calculated as .93. As a result, a valid and reliable assessment and evaluation instrument that measures the exam performance anxiety of the students studying in the Department of Music Education, has been developed.

  6. [A reliability growth assessment method and its application in the development of equipment in space cabin].

    Science.gov (United States)

    Chen, J D; Sun, H L

    1999-04-01

    Objective. To assess and predict reliability of an equipment dynamically by making full use of various test informations in the development of products. Method. A new reliability growth assessment method based on army material system analysis activity (AMSAA) model was developed. The method is composed of the AMSAA model and test data conversion technology. Result. The assessment and prediction results of a space-borne equipment conform to its expectations. Conclusion. It is suggested that this method should be further researched and popularized.

  7. MEMS reliability: coming of age

    Science.gov (United States)

    Douglass, Michael R.

    2008-02-01

    In today's high-volume semiconductor world, one could easily take reliability for granted. As the MOEMS/MEMS industry continues to establish itself as a viable alternative to conventional manufacturing in the macro world, reliability can be of high concern. Currently, there are several emerging market opportunities in which MOEMS/MEMS is gaining a foothold. Markets such as mobile media, consumer electronics, biomedical devices, and homeland security are all showing great interest in microfabricated products. At the same time, these markets are among the most demanding when it comes to reliability assurance. To be successful, each company developing a MOEMS/MEMS device must consider reliability on an equal footing with cost, performance and manufacturability. What can this maturing industry learn from the successful development of DLP technology, air bag accelerometers and inkjet printheads? This paper discusses some basic reliability principles which any MOEMS/MEMS device development must use. Examples from the commercially successful and highly reliable Digital Micromirror Device complement the discussion.

  8. Development and reliability of the rating of compensatory movements in upper limb prosthesis wearers during work-related tasks.

    Science.gov (United States)

    van der Laan, Tallie M J; Postema, Sietke G; Reneman, Michiel F; Bongers, Raoul M; van der Sluis, Corry K

    2018-02-10

    Reliability study. Quantifying compensatory movements during work-related tasks may help to prevent musculoskeletal complaints in individuals with upper limb absence. (1) To develop a qualitative scoring system for rating compensatory shoulder and trunk movements in upper limb prosthesis wearers during the performance of functional capacity evaluation tests adjusted for use by 1-handed individuals (functional capacity evaluation-one handed [FCE-OH]); (2) to examine the interrater and intrarater reliability of the scoring system; and (3) to assess its feasibility. Movement patterns of 12 videotaped upper limb prosthesis wearers and 20 controls were analyzed. Compensatory movements were defined for each FCE-OH test, and a scoring system was developed, pilot tested, and adjusted. During reliability testing, 18 raters (12 FCE experts and 6 physiotherapists/gait analysts) scored videotapes of upper limb prosthesis wearers performing 4 FCE-OH tests 2 times (2 weeks apart). Agreement was expressed in % and kappa value. Feasibility (focus area's "acceptability", "demand," and "implementation") was determined by using a questionnaire. After 2 rounds of pilot testing and adjusting, reliability of a third version was tested. The interrater reliability for the first and second rating sessions were к = 0.54 (confidence interval [CI]: 0.52-0.57) and к = 0.64 (CI: 0.61-0.66), respectively. The intrarater reliability was к = 0.77 (CI: 0.72-0.82). The feasibility was good but could be improved by a training program. It seems possible to identify compensatory movements in upper limb prosthesis wearers during the performance of FCE-OH tests reliably by observation using the developed observational scoring system. Interrater reliability was satisfactory in most instances; intrarater reliability was good. Feasibility was established. Copyright © 2018 Hanley & Belfus. Published by Elsevier Inc. All rights reserved.

  9. Generating project value through design for reliability: on the development and implementation of a potential value framework

    OpenAIRE

    Woods, K. B. W.

    2007-01-01

    The current trend to economically exploit deepwater hydrocarbon reserves is to reduce the capital expenditure; accomplished by deploying subsea equipment. The financial benefit afforded is offset by the risk of high operational costs associated with failure. Recognition of the life cycle cost implications of subsea reliability have led to the development of the reliability strategy. This strategy adopts a risk based approach to design for reliability where only analyses (and th...

  10. Statistical distribution of time to crack initiation and initial crack size using service data

    Science.gov (United States)

    Heller, R. A.; Yang, J. N.

    1977-01-01

    Crack growth inspection data gathered during the service life of the C-130 Hercules airplane were used in conjunction with a crack propagation rule to estimate the distribution of crack initiation times and of initial crack sizes. A Bayesian statistical approach was used to calculate the fraction of undetected initiation times as a function of the inspection time and the reliability of the inspection procedure used.

  11. Shoulder muscle endurance: the development of a standardized and reliable protocol

    Directory of Open Access Journals (Sweden)

    Roy Jean-Sébastien

    2011-01-01

    Full Text Available Abstract Background Shoulder muscle fatigue has been proposed as a possible link to explain the association between repetitive arm use and the development of rotator cuff disorders. To our knowledge, no standardized clinical endurance protocol has been developed to evaluate the effects of muscle fatigue on shoulder function. Such a test could improve clinical examination of individuals with shoulder disorders. Therefore, the purpose of this study was to establish a reliable protocol for objective assessment of shoulder muscle endurance. Methods An endurance protocol was developed on a stationary dynamometer (Biodex System 3. The endurance protocol was performed in isotonic mode with the resistance set at 50% of each subject's peak torque as measured for shoulder external (ER and internal rotation (IR. Each subject performed 60 continuous repetitions of IR/ER rotation. The endurance protocol was performed by 36 healthy individuals on two separate occasions at least two days apart. Maximal isometric shoulder strength tests were performed before and after the fatigue protocol to evaluate the effects of the endurance protocol and its reliability. Paired t-tests were used to evaluate the reduction in shoulder strength due to the protocol, while intraclass correlation coefficients (ICC and minimal detectable change (MDC were used to evaluate its reliability. Results Maximal isometric strength was significantly decreased after the endurance protocol (P 0.84. Conclusions Changes in muscular performance observed during and after the muscular endurance protocol suggests that the protocol did result in muscular fatigue. Furthermore, this study established that the resultant effects of fatigue of the proposed isotonic protocol were reproducible over time. The protocol was performed without difficulty by all volunteers and took less than 10 minutes to perform, suggesting that it might be feasible for clinical practice. This protocol could be used to induce

  12. Professional Development: Designing Initiatives to Meet the Needs of Online Faculty

    Directory of Open Access Journals (Sweden)

    Marquita Elliott

    2015-01-01

    Full Text Available The increasing prevalence of online courses mandates an examination of the similarities – and differences – in the faculty training and development needs of those teaching online. With institutions facing increasingly limited resources, there is a need to prioritize faculty development initiatives that will encourage faculty participation. An examination of interest, attendance and completion rates of faculty development initiatives targeting online faculty revealed no distinct preferences in relation to the focus or format of programs offered. The authors recommend offering flexibility and diversity in faculty development initiatives to accommodate the disparate needs of a remote, heterogeneous faculty population; as such, a sample needs assessment is offered to help guide faculty development programming to support online teaching.

  13. Initial developments in the Stanford SQUIRT program

    Science.gov (United States)

    Kitts, Christopher A.; Twiggs, Robert J.

    1995-01-01

    Stanford University's Department of Aeronautics and Astronautics has commenced full scale development of a new microsatellite initiative. Known as the satellite quick research testbed (SQUIRT) program, the project's goal is to produce student engineered satellites capable of servicing state-of-the-art research payloads on a yearly basis. This program is specifically designed to meet the education and research goals of the department's Satellite Systems Development Laboratory. SQUIRT vehicles are envisioned to consist of a 25 pound, 9 inch tall, 16 inch diameter hexagonal structure with complete processor, communications, power, thermal, and attitude subsystems. These spacecraft cater to low power, volume, and mass research experiments and student developed educational packages. Mission lifetimes of up to one year are considered. Through student participation, voluntary mentoring from the academic and industrial communities, and the extensive use of off-the-shelf components, the cash outlay target for SQUIRT class vehicles is $50,000. This paper discusses the educational and research issues surrounding the development of Stanford's spacecraft design curriculum and the formulation of the SQUIRT program. A technical review of the first SQUIRT satellite, named SAPPHIRE, and an outline of the conceptual plans for other missions is also presented. Additionally, initiatives concerning partner academic institutions and public domain design information are featured.

  14. Research review and development trends of human reliability analysis techniques

    International Nuclear Information System (INIS)

    Li Pengcheng; Chen Guohua; Zhang Li; Dai Licao

    2011-01-01

    Human reliability analysis (HRA) methods are reviewed. The theoretical basis of human reliability analysis, human error mechanism, the key elements of HRA methods as well as the existing HRA methods are respectively introduced and assessed. Their shortcomings,the current research hotspot and difficult problems are identified. Finally, it takes a close look at the trends of human reliability analysis methods. (authors)

  15. An Evaluation Method of Equipment Reliability Configuration Management

    Science.gov (United States)

    Wang, Wei; Feng, Weijia; Zhang, Wei; Li, Yuan

    2018-01-01

    At present, many equipment development companies have been aware of the great significance of reliability of the equipment development. But, due to the lack of effective management evaluation method, it is very difficult for the equipment development company to manage its own reliability work. Evaluation method of equipment reliability configuration management is to determine the reliability management capabilities of equipment development company. Reliability is not only designed, but also managed to achieve. This paper evaluates the reliability management capabilities by reliability configuration capability maturity model(RCM-CMM) evaluation method.

  16. AMSAA Reliability Growth Guide

    National Research Council Canada - National Science Library

    Broemm, William

    2000-01-01

    ... has developed reliability growth methodology for all phases of the process, from planning to tracking to projection. The report presents this methodology and associated reliability growth concepts.

  17. Test-retest reliability of the assessment of postural stability in typically developing children and in hearing impaired children.

    Science.gov (United States)

    De Kegel, A; Dhooge, I; Cambier, D; Baetens, T; Palmans, T; Van Waelvelde, H

    2011-04-01

    The purpose of this study was to establish test-retest reliability of centre of pressure (COP) measurements obtained by an AccuGait portable forceplate (ACG), mean COG sway velocity measured by a Basic Balance Master (BBM) and clinical balance tests in children with and without balance difficulties. 49 typically developing children and 23 hearing impaired children, with a higher risk for stability problems, between 6 and 12 years of age participated. Each child performed the modified Clinical Test of Sensory Interaction on Balance (mCTSIB), Unilateral Stance (US) and Tandem Stance on ACG, mCTSIB and US on BBM and clinical balance tests: one-leg standing, balance beam walking and one-leg hopping. All subjects completed 2 test sessions on 2 different days in the same week assessed by the same examiner. Among COP measurements obtained by the ACG, mean sway velocity was the most reliable parameter with all ICCs higher than 0.72. The standard deviation (SD) of sway velocity, sway area, SD of anterior-posterior and SD of medio-lateral COP data showed moderate to excellent reliability with ICCs between 0.55 and 0.96 but some caution must be taken into account in some conditions. BBM is less reliable but clinical balance tests are as reliable as ACG. Hearing impaired children exhibited better relative reliability (ICC) and comparable absolute reliability (SEM) for most balance parameters compared to typically developing children. Reliable information regarding postural stability of typically developing children and hearing impaired children may be obtained utilizing COP measurements generated by an AccuGait system and clinical balance tests. Copyright © 2011 Elsevier B.V. All rights reserved.

  18. Development of thermal hydraulic models for the reliable regulatory auditing code

    Energy Technology Data Exchange (ETDEWEB)

    Chung, B. D.; Song, C. H.; Lee, Y. J.; Kwon, T. S. [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    2003-04-15

    The objective of this project is to develop thermal hydraulic models for use in improving the reliability of the regulatory auditing codes. The current year fall under the first step of the 3 year project, and the main researches were focused on identifying the candidate thermal hydraulic models for improvement and to develop prototypical model development. During the current year, the verification calculations submitted for the APR 1400 design certification have been reviewed, the experimental data from the MIDAS DVI experiment facility in KAERI have been analyzed and evaluated, candidate thermal hydraulic models for improvement have been identified, prototypical models for the improved thermal hydraulic models have been developed, items for experiment in connection with the model development have been identified, and preliminary design of the experiment has been carried out.

  19. Development of thermal hydraulic models for the reliable regulatory auditing code

    International Nuclear Information System (INIS)

    Chung, B. D.; Song, C. H.; Lee, Y. J.; Kwon, T. S.

    2003-04-01

    The objective of this project is to develop thermal hydraulic models for use in improving the reliability of the regulatory auditing codes. The current year fall under the first step of the 3 year project, and the main researches were focused on identifying the candidate thermal hydraulic models for improvement and to develop prototypical model development. During the current year, the verification calculations submitted for the APR 1400 design certification have been reviewed, the experimental data from the MIDAS DVI experiment facility in KAERI have been analyzed and evaluated, candidate thermal hydraulic models for improvement have been identified, prototypical models for the improved thermal hydraulic models have been developed, items for experiment in connection with the model development have been identified, and preliminary design of the experiment has been carried out

  20. Reliability and Validity of Prototype Diagnosis for Adolescent Psychopathology.

    Science.gov (United States)

    Haggerty, Greg; Zodan, Jennifer; Mehra, Ashwin; Zubair, Ayyan; Ghosh, Krishnendu; Siefert, Caleb J; Sinclair, Samuel J; DeFife, Jared

    2016-04-01

    The current study investigated the interrater reliability and validity of prototype ratings of 5 common adolescent psychiatric disorders: attention-deficit/hyperactivity disorder, conduct disorder, major depressive disorder, generalized anxiety disorder, and posttraumatic stress disorder. One hundred fifty-seven adolescent inpatient participants consented to participate in this study. We compared ratings from 2 inpatient clinicians, blinded to each other's ratings and patient measures, after their separate initial diagnostic interview to assess interrater reliability. Prototype ratings completed by clinicians after their initial diagnostic interview with adolescent inpatients and outpatients were compared with patient-reported behavior problems and parents' report of their child's behavioral problems. Prototype ratings demonstrated good interrater reliability. Clinicians' prototype ratings showed predicted relationships with patient-reported behavior problems and parent-reported behavior problems. Prototype matching seems to be a possible alternative for psychiatric diagnosis. Prototype ratings showed good interrater reliability based on clinicians unique experiences with the patient (as opposed to video-/audio-recorded material) with no training.

  1. Indian program for development of technologies relevant to reliable, non-intrusive, concealed-contraband detection

    International Nuclear Information System (INIS)

    Auluck, S.K.H.

    2007-01-01

    Generating capability for reliable, non-intrusive detection of concealed-contraband, particularly, organic contraband like explosives and narcotics, has become a national priority. This capability spans a spectrum of technologies. If a technology mission addressing the needs of a highly sophisticated technology like PFNA is set up, the capabilities acquired would be adequate to meet the requirements of many other sets of technologies. This forms the background of the Indian program for development of technologies relevant to reliable, non-intrusive, concealed contraband detection. One of the central themes of the technology development programs would be modularization of the neutron source and detector technologies, so that common elements can be combined in different ways for meeting a variety of application requirements. (author)

  2. Development of reliability centered maintenance methods and tools

    International Nuclear Information System (INIS)

    Jacquot, J.P.; Dubreuil-Chambardel, A.; Lannoy, A.; Monnier, B.

    1992-12-01

    This paper recalls the development of the RCM (Reliability Centered Maintenance) approach in the nuclear industry and describes the trial study implemented by EDF in the context of the OMF (RCM) Project. The approach developed is currently being applied to about thirty systems (Industrial Project). On a parallel, R and D efforts are being maintained to improve the selectivity of the analysis methods. These methods use Probabilistic Safety Study models, thereby guaranteeing better selectivity in the identification of safety critical elements and enhancing consistency between Maintenance and Safety studies. They also offer more detailed analysis of operation feedback, invoking for example Bayes' methods combining expert judgement and feedback data. Finally, they propose a functional and material representation of the plant. This dual representation describes both the functions assured by maintenance provisions and the material elements required for their implementation. In the final chapter, the targets of the future OMF workstation are summarized and the latter's insertion in the EDF information system is briefly described. (authors). 5 figs., 2 tabs., 7 refs

  3. Development and Reliability of the OMERACT Thumb Base Osteoarthritis Magnetic Resonance Imaging Scoring System

    DEFF Research Database (Denmark)

    Kroon, Féline P B; Conaghan, Philip G; Foltz, Violaine

    2017-01-01

    : The TOMS assessed the first carpometacarpal (CMC-1) and scaphotrapeziotrapezoid (STT) joints for synovitis, subchondral bone defects (including erosions, cysts, and bone attrition), osteophytes, cartilage, and bone marrow lesions on a 0-3 scale (normal to severe). Subluxation was evaluated only in the CMC......, with better performance for subchondral bone defects, subluxation, and bone marrow lesions. CONCLUSION: A thumb base OA MRI scoring system has been developed. The OMERACT TOMS demonstrated good intrareader and interreader reliability. Longitudinal studies are warranted to investigate reliability of change...

  4. The Reliability, Validity, and Evaluation of the Objective Structured Clinical Examination in Podiatry (Chiropody).

    Science.gov (United States)

    Woodburn, Jim; Sutcliffe, Nick

    1996-01-01

    The Objective Structured Clinical Examination (OSCE), initially developed for undergraduate medical education, has been adapted for assessment of clinical skills in podiatry students. A 12-month pilot study found the test had relatively low levels of reliability, high construct and criterion validity, and good stability of performance over time.…

  5. View all initiatives | IDRC - International Development Research ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    The Science Granting Councils Initiative in Sub-Saharan Africa is focused on strengthening the capacities of science granting councils in order to support research and evidence-based policies that will contribute to economic and social development in Sub-Saharan Africa. We fund researchers driving global change.

  6. Content validity and reliability of test of gross motor development in Chilean children

    Directory of Open Access Journals (Sweden)

    Marcelo Cano-Cappellacci

    2015-01-01

    Full Text Available ABSTRACT OBJECTIVE To validate a Spanish version of the Test of Gross Motor Development (TGMD-2 for the Chilean population. METHODS Descriptive, transversal, non-experimental validity and reliability study. Four translators, three experts and 92 Chilean children, from five to 10 years, students from a primary school in Santiago, Chile, have participated. The Committee of Experts has carried out translation, back-translation and revision processes to determine the translinguistic equivalence and content validity of the test, using the content validity index in 2013. In addition, a pilot implementation was achieved to determine test reliability in Spanish, by using the intraclass correlation coefficient and Bland-Altman method. We evaluated whether the results presented significant differences by replacing the bat with a racket, using T-test. RESULTS We obtained a content validity index higher than 0.80 for language clarity and relevance of the TGMD-2 for children. There were significant differences in the object control subtest when comparing the results with bat and racket. The intraclass correlation coefficient for reliability inter-rater, intra-rater and test-retest reliability was greater than 0.80 in all cases. CONCLUSIONS The TGMD-2 has appropriate content validity to be applied in the Chilean population. The reliability of this test is within the appropriate parameters and its use could be recommended in this population after the establishment of normative data, setting a further precedent for the validation in other Latin American countries.

  7. US utility I ampersand C upgrade initiative

    International Nuclear Information System (INIS)

    Wilkinson, D.

    1993-01-01

    This paper describes an initiative which is being pursued to address the problems associated with the increasing obsolescence of instrumentation and control (I ampersand C) systems in nuclear power plants. Such efforts will improve safety, availability, and reliability of plant operation. The program presented is a joint plan between EPRI, utilities, and vendors, to bring about the development of technology to meet these needs, to encourage the private sector to develop such technology, and to prove to utilities the value and utility in applying such technology to upgrade their facilities. Part of this plan is demonstration programs where plant-wide sensor and I ampersand C improvements can be implemented, in a documented manner, to provide R ampersand D information on their performance, functionality, and reliability. The intent is to reduce the costs and shorten the learning curve associated with the utilization of modern I ampersand C equipment

  8. Some developments in human reliability analysis approaches and tools

    Energy Technology Data Exchange (ETDEWEB)

    Hannaman, G W; Worledge, D H

    1988-01-01

    Since human actions have been recognized as an important contributor to safety of operating plants in most industries, research has been performed to better understand and account for the way operators interact during accidents through the control room and equipment interface. This paper describes the integration of a series of research projects sponsored by the Electric Power Research Institute to strengthen the methods for performing the human reliability analysis portion of the probabilistic safety studies. It focuses on the analytical framework used to guide the analysis, the development of the models for quantifying time-dependent actions, and simulator experiments used to validate the models.

  9. Development of a Digital Citizenship Scale for Youth: A Validity and Reliability Study

    Directory of Open Access Journals (Sweden)

    Zafer KUŞ

    2017-12-01

    Full Text Available The main objective of this study is to develop a valid and reliable scale for identifying digital citizenship perceptions of young people in the most common age groups. The study was conducted as a survey study. The study group of this study is composed of 438 people in Turkey who are among 16-24 age group with the highest rate of internet use in Turkey. An exploratory factor analysis was performed to determine the validity of the scale and the item discrimination powers were calculated. The total variance of the scale was determined that the scale had 8-factor structure and was found to be 49,70%. The internal consistency level was also calculated to determine the reliability of the scale. As a result, it can be said that this scale is a valid and reliable scale that can be used to determine the digital citizenship perceptions of young people.

  10. The Leuven Adolescent Perceived Parenting Scale (LAPPS) : Reliability and validity with French-speaking adolescents in Belgium

    NARCIS (Netherlands)

    Delhaye, M.; Beyers, W.; Klimstra, T.A.; Linkowski, P.; Goossens, L.

    2012-01-01

    The present study examined the reliability and validity of the Leuven Adolescent Perceived Parenting Scale (LAPPS), an instrument initially developed for use with Dutch-speaking adolescents in Belgium, in French-speaking adolescents living in that same country. The instrument was administered to a

  11. Studies on the disbonding initiation of interfacial cracks.

    Energy Technology Data Exchange (ETDEWEB)

    McAdams, Brian J. (Lehigh University, Bethlehem, PA); Pearson, Raymond A. (Lehigh University, Bethlehem, PA)

    2005-08-01

    With the continuing trend of decreasing feature sizes in flip-chip assemblies, the reliability tolerance to interfacial flaws is also decreasing. Small-scale disbonds will become more of a concern, pointing to the need for a better understanding of the initiation stage of interfacial delamination. With most accepted adhesion metric methodologies tailored to predict failure under the prior existence of a disbond, the study of the initiation phenomenon is open to development and standardization of new testing procedures. Traditional fracture mechanics approaches are not suitable, as the mathematics assume failure to originate at a disbond or crack tip. Disbond initiation is believed to first occur at free edges and corners, which act as high stress concentration sites and exhibit singular stresses similar to a crack tip, though less severe in intensity. As such, a 'fracture mechanics-like' approach may be employed which defines a material parameter--a critical stress intensity factor (K{sub c})--that can be used to predict when initiation of a disbond at an interface will occur. The factors affecting the adhesion of underfill/polyimide interfaces relevant to flip-chip assemblies were investigated in this study. The study consisted of two distinct parts: a comparison of the initiation and propagation phenomena and a comparison of the relationship between sub-critical and critical initiation of interfacial failure. The initiation of underfill interfacial failure was studied by characterizing failure at a free-edge with a critical stress intensity factor. In comparison with the interfacial fracture toughness testing, it was shown that a good correlation exists between the initiation and propagation of interfacial failures. Such a correlation justifies the continuing use of fracture mechanics to predict the reliability of flip-chip packages. The second aspect of the research involved fatigue testing of tensile butt joint specimens to determine lifetimes at sub

  12. South Africa's Nuclear Skills Development Initiatives

    Energy Technology Data Exchange (ETDEWEB)

    Matube, Ntebatse [NECSA, P.O. BOX 582, 00001 Pretoria (South Africa)

    2008-07-01

    South Africa's long nuclear history has enabled it to develop and explore new nuclear technologies. The country's nuclear industry is becoming innovative and will soon be able to compete within the global nuclear market. This includes projects such as the Pebble-Bed Modular Reactor (PBMR), a generation IV reactor technology, whose construction is anticipated by 2009. This will put South Africa in the fore-front of new technologies. Globally, the nuclear sector is experiencing a renaissance with political support from most governments. The South African government intends to expand the nuclear component in the energy supply mix of the country as a result of an energy crisis resulting from economic growth and thus high demand which will soon outstrip supply. This increased energy demand requires the country to take measures to counteract the crisis. It has been projected that an additional 40000 Megawatts of electricity will be required over the next 20 years in South Africa. Currently about 90% of South Africa's electricity is generated from coal and about 6% from nuclear. The South African electricity utility, Eskom is investigating the expansion of the utility's nuclear power capacity. These investigations are aimed at a potential increase of nuclear capacity to 20000 Megawatts by 2025. Eskom is in the initial phase of the investigation and is considering advanced Pressurized Water Reactors (PWRs) with a combined capacity of around 3500 Megawatts. This planned expansion of the nuclear energy generating program has presented a challenge of developing and maintaining skills and competencies required by the program. The South African government has acknowledged that they do have a challenge and are going to have to develop an aggressive approach to acquire the necessary skills and competencies required for the program. This aggressive approach will have to accelerate the development of nuclear human capital capacity by ensuring that we utilize the

  13. Reliability Modeling Development and Its Applications for Ceramic Capacitors with Base-Metal Electrodes (BMEs)

    Science.gov (United States)

    Liu, Donhang

    2014-01-01

    This presentation includes a summary of NEPP-funded deliverables for the Base-Metal Electrodes (BMEs) capacitor task, development of a general reliability model for BME capacitors, and a summary and future work.

  14. Research initiatives for plug-and-play scientific computing

    International Nuclear Information System (INIS)

    McInnes, Lois Curfman; Dahlgren, Tamara; Nieplocha, Jarek; Bernholdt, David; Allan, Ben; Armstrong, Rob; Chavarria, Daniel; Elwasif, Wael; Gorton, Ian; Kenny, Joe; Krishan, Manoj; Malony, Allen; Norris, Boyana; Ray, Jaideep; Shende, Sameer

    2007-01-01

    This paper introduces three component technology initiatives within the SciDAC Center for Technology for Advanced Scientific Component Software (TASCS) that address ever-increasing productivity challenges in creating, managing, and applying simulation software to scientific discovery. By leveraging the Common Component Architecture (CCA), a new component standard for high-performance scientific computing, these initiatives tackle difficulties at different but related levels in the development of component-based scientific software: (1) deploying applications on massively parallel and heterogeneous architectures, (2) investigating new approaches to the runtime enforcement of behavioral semantics, and (3) developing tools to facilitate dynamic composition, substitution, and reconfiguration of component implementations and parameters, so that application scientists can explore tradeoffs among factors such as accuracy, reliability, and performance

  15. Development and Reliability Evaluation of the Movement Rating Instrument for Virtual Reality Video Game Play.

    Science.gov (United States)

    Levac, Danielle; Nawrotek, Joanna; Deschenes, Emilie; Giguere, Tia; Serafin, Julie; Bilodeau, Martin; Sveistrup, Heidi

    2016-06-01

    Virtual reality active video games are increasingly popular physical therapy interventions for children with cerebral palsy. However, physical therapists require educational resources to support decision making about game selection to match individual patient goals. Quantifying the movements elicited during virtual reality active video game play can inform individualized game selection in pediatric rehabilitation. The objectives of this study were to develop and evaluate the feasibility and reliability of the Movement Rating Instrument for Virtual Reality Game Play (MRI-VRGP). Item generation occurred through an iterative process of literature review and sample videotape viewing. The MRI-VRGP includes 25 items quantifying upper extremity, lower extremity, and total body movements. A total of 176 videotaped 90-second game play sessions involving 7 typically developing children and 4 children with cerebral palsy were rated by 3 raters trained in MRI-VRGP use. Children played 8 games on 2 virtual reality and active video game systems. Intraclass correlation coefficients (ICCs) determined intra-rater and interrater reliability. Excellent intrarater reliability was evidenced by ICCs of >0.75 for 17 of the 25 items across the 3 raters. Interrater reliability estimates were less precise. Excellent interrater reliability was achieved for far reach upper extremity movements (ICC=0.92 [for right and ICC=0.90 for left) and for squat (ICC=0.80) and jump items (ICC=0.99), with 9 items achieving ICCs of >0.70, 12 items achieving ICCs of between 0.40 and 0.70, and 4 items achieving poor reliability (close-reach upper extremity-ICC=0.14 for right and ICC=0.07 for left) and single-leg stance (ICC=0.55 for right and ICC=0.27 for left). Poor video quality, differing item interpretations between raters, and difficulty quantifying the high-speed movements involved in game play affected reliability. With item definition clarification and further psychometric property evaluation, the MRI

  16. Developing versus developed companies in Business Excellence initiatives

    DEFF Research Database (Denmark)

    Haffer, Rafal; Kristensen, Kai

    2008-01-01

    The paper reports the advance of Polish companies in Business Excellence initiatives. It indicates how these activities influence their performance. EFQM Excellence Model indicators are used as the evaluation criteria for the study. The performance variable is introduced to ensure the calculation...... of correlations between EFQM model indicators and performance results. The data are next estimated as a structural equation model by partial least squares using SmartPLS software (Ringle et al., 2005). That estimation is conducted on the model of the Danish Business Excellence Index methodology (Kristensen et al...... results from the Business Excellence Model as a proxy for actual financial results in Poland. Data and results from a similar study done in Denmark are also described; thus, a comparison between developing Polish companies and developed Danish ones is included. Poland and Denmark are used as cases of...

  17. Instrumented Pipeline Initiative

    Energy Technology Data Exchange (ETDEWEB)

    Thomas Piro; Michael Ream

    2010-07-31

    This report summarizes technical progress achieved during the cooperative agreement between Concurrent Technologies Corporation (CTC) and U.S. Department of Energy to address the need for a for low-cost monitoring and inspection sensor system as identified in the Department of Energy (DOE) National Gas Infrastructure Research & Development (R&D) Delivery Reliability Program Roadmap.. The Instrumented Pipeline Initiative (IPI) achieved the objective by researching technologies for the monitoring of pipeline delivery integrity, through a ubiquitous network of sensors and controllers to detect and diagnose incipient defects, leaks, and failures. This report is organized by tasks as detailed in the Statement of Project Objectives (SOPO). The sections all state the objective and approach before detailing results of work.

  18. ASCERTAINMENT OF ELECTRIC-SUPPLY SCHEMES RELIABILITY FOR THE ATOMIC POWER PLANT AUXILIARIES

    Directory of Open Access Journals (Sweden)

    A. L. Starzhinskij

    2015-01-01

    Full Text Available The paper completes ascertainment of electrical-supply scheme reliability for the auxiliaries of a nuclear power plant. Thereat the author considers the system behavior during the block normal operation, carrying out current maintenance, and capital repairs in combination with initiating events. The initiating events for reactors include complete blackout, i.e. the loss of outside power supply (normal and reserve; emergency switching one of the working turbogenerators; momentary dumping the normal rating to the level of auxiliaries with seating the cutout valve of one turbo-generator. The combination of any initiating event with the repairing mode in case of one of the system elements failure should not lead to blackout occurrence of more than one system of the reliable power supply. This requirement rests content with the help of the reliable power supply system self-dependence (electrical and functional and the emergency power-supply operational autonomy (diesel generator and accumulator batteries.The reliability indicators of the power supply system for the nuclear power plant auxiliaries are the conditional probabilities of conjoined blackout of one, two, and three sections of the reliable power supply conditional upon an initiating event emerging and the blackout of one, two, and three reliable power-supply sections under the normal operational mode. Furthermore, they also are the blackout periodicity of one and conjointly two, three, and four sections of normal operation under the block normal operational mode. It is established that the blackout of one bus section of normal operation and one section of reliable power-supply system of the auxiliaries that does not lead to complete blackout of the plant auxiliaries may occur once in three years. The probability of simultaneous power failure of two or three normal-operation sections and of two reliable power-supply sections during the power plant service life is unlikely.

  19. The Clinician-Administered PTSD Scale for DSM-5 (CAPS-5): Development and initial psychometric evaluation in military veterans.

    Science.gov (United States)

    Weathers, Frank W; Bovin, Michelle J; Lee, Daniel J; Sloan, Denise M; Schnurr, Paula P; Kaloupek, Danny G; Keane, Terence M; Marx, Brian P

    2018-03-01

    The Clinician-Administered PTSD Scale (CAPS) is an extensively validated and widely used structured diagnostic interview for posttraumatic stress disorder (PTSD). The CAPS was recently revised to correspond with PTSD criteria in the fifth edition of the Diagnostic and Statistical Manual of Mental Disorders (DSM-5; American Psychiatric Association, 2013). This article describes the development of the CAPS for DSM-5 (CAPS-5) and presents the results of an initial psychometric evaluation of CAPS-5 scores in 2 samples of military veterans (Ns = 165 and 207). CAPS-5 diagnosis demonstrated strong interrater reliability (к = .78 to 1.00, depending on the scoring rule) and test-retest reliability (к = .83), as well as strong correspondence with a diagnosis based on the CAPS for DSM-IV (CAPS-IV; к = .84 when optimally calibrated). CAPS-5 total severity score demonstrated high internal consistency (α = .88) and interrater reliability (ICC = .91) and good test-retest reliability (ICC = .78). It also demonstrated good convergent validity with total severity score on the CAPS-IV (r = .83) and PTSD Checklist for DSM-5 (r = .66) and good discriminant validity with measures of anxiety, depression, somatization, functional impairment, psychopathy, and alcohol abuse (rs = .02 to .54). Overall, these results indicate that the CAPS-5 is a psychometrically sound measure of DSM-5 PTSD diagnosis and symptom severity. Importantly, the CAPS-5 strongly corresponds with the CAPS-IV, which suggests that backward compatibility with the CAPS-IV was maintained and that the CAPS-5 provides continuity in evidence-based assessment of PTSD in the transition from DSM-IV to DSM-5 criteria. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

  20. Initial development and preliminary validation of a new negative symptom measure: the Clinical Assessment Interview for Negative Symptoms (CAINS).

    Science.gov (United States)

    Forbes, Courtney; Blanchard, Jack J; Bennett, Melanie; Horan, William P; Kring, Ann; Gur, Raquel

    2010-12-01

    As part of an ongoing scale development process, this study provides an initial examination of the psychometric properties and validity of a new interview-based negative symptom instrument, the Clinical Assessment Interview for Negative Symptoms (CAINS), in outpatients with schizophrenia or schizoaffective disorder (N = 37). The scale was designed to address limitations of existing measures and to comprehensively assess five consensus-based negative symptoms: asociality, avolition, anhedonia (consummatory and anticipatory), affective flattening, and alogia. Results indicated satisfactory internal consistency reliability for the total CAINS scale score and promising inter-rater agreement, with clear areas identified in need of improvement. Convergent validity was evident in general agreement between the CAINS and alternative negative symptom measures. Further, CAINS subscales significantly correlated with relevant self-report emotional experience measures as well as with social functioning. Discriminant validity of the CAINS was strongly supported by its small, non-significant relations with positive symptoms, general psychiatric symptoms, and depression. These preliminary data on an early beta-version of the CAINS provide initial support for this new assessment approach to negative symptoms and suggest directions for further scale development. Copyright © 2010 Elsevier B.V. All rights reserved.

  1. Development of a MELCOR self-initialization algorithm for boiling water reactors

    International Nuclear Information System (INIS)

    Chien, C.S.; Wang, S.J.; Cheng, S.K.

    1996-01-01

    The MELCOR code, developed by Sandia National Laboratories, is suitable for calculating source terms and simulating severe accident phenomena of nuclear power plants. Prior to simulating a severe accident transient with MELCOR, the initial steady-state conditions must be generated in advance. The current MELCOR users' manuals do not provide a self-initialization procedure; this is the reason users have to adjust the initial conditions by themselves through a trial-and-error approach. A MELCOR self-initialization algorithm for boiling water reactor plants has been developed, which eliminates the tedious trial-and-error procedures and improves the simulation accuracy. This algorithm adjusts the important plant variable such as the dome pressure, downcomer level, and core flow rate to the desired conditions automatically. It is implemented through input with control functions provided in MELCOR. The reactor power and feedwater temperature are fed as input data. The initialization work of full-power conditions of the Kuosheng nuclear power station is cited as an example. These initial conditions are generated successfully with the developed algorithm. The generated initial conditions can be stored in a restart file and used for transient analysis. The methodology in this study improves the accuracy and consistency of transient calculations. Meanwhile, the algorithm provides all MELCOR users an easy and correct method for establishing the initial conditions

  2. Evaluation of the reliability of a passive system

    International Nuclear Information System (INIS)

    Bianchi, F.; Burgazzi, L.; D'Auria, F.; Galassi, G.M.; Ricotti, M.E.; Oriani, L.

    2001-01-01

    A passive system should be theoretically more reliable than an active one. In fact its operation is independent by any external input or energy and is relied only upon natural physical laws (e.g., gravity, natural circulation, etc.) and/or 'intelligent' use of the energy inherently available in the system (e.g., chemical reaction, decay heat, etc.). Nevertheless the passive system may fail its mission as consequences of component failures, deviation of physical phenomena, boundary and/or initial conditions from the expectation. This document describes at first the methodology developed by ENEA, in collaboration of University of Pisa and Polytechnic of Milano, allowing the evaluation of the reliability for a passive system, which operation is based on moving working fluids (type B and C, cf. IAEA). It reports the results of an exercise performed on a system, which operation is based on Natural Circulation.(author)

  3. Project management initiative local development through specialized training.

    Directory of Open Access Journals (Sweden)

    Neisy Ramos Acevedo

    2013-09-01

    Full Text Available The local development should complete a group of basic principles, such as: the design for training and the tools information adapted to the particularity of each territory. This training facilitates, also, the articulation of the stocks deployed by the local leaders, and it increases the administration of the knowledge and the transfer of technologies, processes in those that the nexuses are enlarged between the structures and the population, and where the participation of different present actors is potentialized in the territory. During the year 2010 the Ministry of Economy and Planning begins to offer the possibility to finance projects for the local development, nevertheless these initiatives should be accompanied by a rigorous study of feasibility of the investments. The University of Sancti Spíritus, committed in this zeal, designs the Diplomate of Administration of Projects for Local Initiatives, which offers theoretical tools and it develops practical abilities in the different actors of the local development that facilitate the realization of these studies. The exercise of this graduate's culmination consists on the defence of the study of feasibility of those projects that each municipality identifies as priority for its development.

  4. Development of thermal hydraulic models for the reliable regulatory auditing code

    Energy Technology Data Exchange (ETDEWEB)

    Chung, B. D.; Song, C. H.; Lee, Y. J.; Kwon, T. S.; Lee, S. W. [Korea Automic Energy Research Institute, Taejon (Korea, Republic of)

    2004-02-15

    The objective of this project is to develop thermal hydraulic models for use in improving the reliability of the regulatory auditing codes. The current year fall under the second step of the 3 year project, and the main researches were focused on the development of downcorner boiling model. During the current year, the bubble stream model of downcorner has been developed and installed in he auditing code. The model sensitivity analysis has been performed for APR1400 LBLOCA scenario using the modified code. The preliminary calculation has been performed for the experimental test facility using FLUENT and MARS code. The facility for air bubble experiment has been installed. The thermal hydraulic phenomena for VHTR and super critical reactor have been identified for the future application and model development.

  5. 78 FR 69018 - Improving the Resiliency of Mobile Wireless Communications Networks; Reliability and Continuity...

    Science.gov (United States)

    2013-11-18

    ... consumers value overall network reliability and quality in selecting mobile wireless service providers, they...-125] Improving the Resiliency of Mobile Wireless Communications Networks; Reliability and Continuity... (Reliability NOI) in 2011 to ``initiate a comprehensive examination of issues regarding the reliability...

  6. Review of methods for the integration of reliability and design engineering

    International Nuclear Information System (INIS)

    Reilly, J.T.

    1978-03-01

    A review of methods for the integration of reliability and design engineering was carried out to establish a reliability program philosophy, an initial set of methods, and procedures to be used by both the designer and reliability analyst. The report outlines a set of procedures which implements a philosophy that requires increased involvement by the designer in reliability analysis. Discussions of each method reviewed include examples of its application

  7. Professional Development: Designing Initiatives to Meet the Needs of Online Faculty

    OpenAIRE

    Marquita Elliott; Nicole Rhoades; Christina M. Jackson; B. Jean Mandernach

    2015-01-01

    The increasing prevalence of online courses mandates an examination of the similarities – and differences – in the faculty training and development needs of those teaching online. With institutions facing increasingly limited resources, there is a need to prioritize faculty development initiatives that will encourage faculty participation. An examination of interest, attendance and completion rates of faculty development initiatives targeting online faculty revealed no distinct preferences in...

  8. Investment in new product reliability

    International Nuclear Information System (INIS)

    Murthy, D.N.P.; Rausand, M.; Virtanen, S.

    2009-01-01

    Product reliability is of great importance to both manufacturers and customers. Building reliability into a new product is costly, but the consequences of inadequate product reliability can be costlier. This implies that manufacturers need to decide on the optimal investment in new product reliability by achieving a suitable trade-off between the two costs. This paper develops a framework and proposes an approach to help manufacturers decide on the investment in new product reliability.

  9. Developing and Evaluating Validity and Reliability of Persian Version of “Dichotic Fused Rhymed Word Test”

    Directory of Open Access Journals (Sweden)

    Nasrin Ghanbari

    2015-10-01

    Full Text Available Objective: The aim of the present study is to develope and evaluate validity and reliability of Persian version of Dichotic Fused Rhymed Words Test in 18-25 years old normal population. Materials & Methods: The Persian version of Dichotic Fused Rhymed Words Test consisted of 15 pairs of monosyllable rhymed words. These paired words are set in 4 lists of 30 items that simultaneously were presented one to the left and another to the right ear so that they lead to perception of a single fusion concept. After selecting the test material from Moin Persian dictionary according to the intended criteria and pairing the rhymed words, content validity was assessed through lawshe method by 10 expert persons, words with high validity were selected and lists were set. Then, the words of each list were recorded on CD in a dichotic mode. Thereafter, the study was performed in 124 normal individuals (68 females and 56 males within ages ranging from 18 to 25 years and the scores were recorded on a designed scoring form. To examine reliability of test, the test was performed on 15 individuals again two weeks after the initial test and the Pearson correlation was assessed. Results: There are significant differences between mean scores of right and left ears (P<0.001. Content Validity Ratio was 0.8-1 for every item. Pearson correlation was 0.83 for test-retest (P<0.001. Cronbach’s alpha and Intra Class Correlation (ICC was 0.81 and 0.84 for internal correlation between scores of lists of test. The result showed that there is significant correlation between the lists. Conclusion: Based on the obtained results, the Persian version of Dichotic Fused Rhymed Words Test has a good content validity and reliability. It can be used in detecting function of corpus callosum, lateralization of the cerebral hemispheres and assessment of central auditory processing.

  10. Developing Teachers' Capacity for Teaching Pupils' Initial Reading ...

    African Journals Online (AJOL)

    DrNneka

    that male students performed better on IRMAT than their female counterpart t- calculated 10.80 at ... Key words: Developing, Teachers' Capacity, Teaching, Initial Reading, Multisensory. Approach .... picture that its name starts with the sound.

  11. Mental Help Seeking Attitudes Scale (MHSAS): Development, reliability, validity, and comparison with the ATSPPH-SF and IASMHS-PO.

    Science.gov (United States)

    Hammer, Joseph H; Parent, Mike C; Spiker, Douglas A

    2018-01-01

    Attitudes is a key help-seeking construct that influences treatment seeking behavior via intention to seek help, per the theory of planned behavior (TPB). This article presents the development and psychometric evaluation of the Mental Help Seeking Attitudes Scale (MHSAS), designed to measure respondents' overall evaluation (unfavorable vs. favorable) of their seeking help from a mental health professional. In Study 1 (N = 857 United States adults), exploratory factor analysis (EFA), confirmatory factor analysis (CFA), and item response theory (IRT) analysis were used to identify an optimal set of 9 items that demonstrated initial evidence of internal consistency, unidimensionality, and strong measurement equivalence/invariance (ME/I) across gender, past help-seeking experience, and psychological distress. Initial convergent evidence of validity was demonstrated via theoretically anticipated relationships between the MHSAS and key variables in the help-seeking nomological network (e.g., subjective norms, perceived behavioral control, intention, public stigma, self-stigma, anticipated risks and benefits, gender, previous help seeking). Initial incremental evidence of validity was demonstrated when the MHSAS demonstrated the ability to account for unique variance in help-seeking intention, beyond that accounted for by the Attitudes Toward Seeking Professional Psychological Help-Short Form scale (ATSPPH-SF) and the Psychological Openness subscale of the Inventory of Attitudes Toward Seeking Mental Health Services (IASMHS-PO). Study 2 (N = 207 United States adults at Times 1 and 2) provided initial evidence of test-retest reliability over a 3-week period. The MHSAS offers mental health professionals a new tool for measuring attitudes that may avoid limitations of current help seeking-attitudes measures (e.g., construct-irrelevant variance). (PsycINFO Database Record (c) 2018 APA, all rights reserved).

  12. Development of a Valid and Reliable Test for Higher-Educated ...

    African Journals Online (AJOL)

    BlignautAS

    based food product development project was initiated to determine the ..... tween good and bad performers. Although it may ..... potential harmful effect of reduced mineral absorption .... L. 2002. Relation between fast food choices and knowl-.

  13. High-reliability health care: getting there from here.

    Science.gov (United States)

    Chassin, Mark R; Loeb, Jerod M

    2013-09-01

    Despite serious and widespread efforts to improve the quality of health care, many patients still suffer preventable harm every day. Hospitals find improvement difficult to sustain, and they suffer "project fatigue" because so many problems need attention. No hospitals or health systems have achieved consistent excellence throughout their institutions. High-reliability science is the study of organizations in industries like commercial aviation and nuclear power that operate under hazardous conditions while maintaining safety levels that are far better than those of health care. Adapting and applying the lessons of this science to health care offer the promise of enabling hospitals to reach levels of quality and safety that are comparable to those of the best high-reliability organizations. We combined the Joint Commission's knowledge of health care organizations with knowledge from the published literature and from experts in high-reliability industries and leading safety scholars outside health care. We developed a conceptual and practical framework for assessing hospitals' readiness for and progress toward high reliability. By iterative testing with hospital leaders, we refined the framework and, for each of its fourteen components, defined stages of maturity through which we believe hospitals must pass to reach high reliability. We discovered that the ways that high-reliability organizations generate and maintain high levels of safety cannot be directly applied to today's hospitals. We defined a series of incremental changes that hospitals should undertake to progress toward high reliability. These changes involve the leadership's commitment to achieving zero patient harm, a fully functional culture of safety throughout the organization, and the widespread deployment of highly effective process improvement tools. Hospitals can make substantial progress toward high reliability by undertaking several specific organizational change initiatives. Further research

  14. Failure mechanism dependence and reliability evaluation of non-repairable system

    International Nuclear Information System (INIS)

    Chen, Ying; Yang, Liu; Ye, Cui; Kang, Rui

    2015-01-01

    Reliability study of electronic system with the physics-of-failure method has been promoted due to the increase knowledge of electronic failure mechanisms. System failure initiates from independent failure mechanisms, have effect on or affect by other failure mechanisms and finally result in system failure. Failure mechanisms in a non-repairable system have many kinds of correlation. One failure mechanism developing to a certain degree will trigger, accelerate or inhibit another or many other failure mechanisms, some kind of failure mechanisms may have the same effect on the failure site, component or system. The destructive effect will be accumulated and result in early failure. This paper presents a reliability evaluation method considering correlativity among failure mechanisms, which includes trigger, acceleration, inhibition, accumulation, and competition. Based on fundamental rule of physics of failure, decoupling methods of these correlations are discussed. With a case, reliability of electronic system is evaluated considering failure mechanism dependence. - Highlights: • Five types of failure mechanism correlations are described. • Decoupling methods of these correlations are discussed. • A reliability evaluation method considering mechanism dependence is proposed. • Results are quite different to results under failure independence assumption

  15. Robust Reliability or reliable robustness? - Integrated consideration of robustness and reliability aspects

    DEFF Research Database (Denmark)

    Kemmler, S.; Eifler, Tobias; Bertsche, B.

    2015-01-01

    products are and vice versa. For a comprehensive understanding and to use existing synergies between both domains, this paper discusses the basic principles of Reliability- and Robust Design theory. The development of a comprehensive model will enable an integrated consideration of both domains...

  16. Microelectronics Reliability

    Science.gov (United States)

    2017-01-17

    inverters  connected in a chain. ................................................. 5  Figure 3  Typical graph showing frequency versus square root of...developing an experimental  reliability estimating methodology that could both illuminate the  lifetime  reliability of advanced devices,  circuits and...or  FIT of the device. In other words an accurate estimate of the device  lifetime  was found and thus the  reliability  that  can  be  conveniently

  17. Feelings about culture scales: development, factor structure, reliability, and validity.

    Science.gov (United States)

    Maffini, Cara S; Wong, Y Joel

    2015-04-01

    Although measures of cultural identity, values, and behavior exist in the multicultural psychological literature, there is currently no measure that explicitly assesses ethnic minority individuals' positive and negative affect toward culture. Therefore, we developed 2 new measures called the Feelings About Culture Scale--Ethnic Culture and Feelings About Culture Scale--Mainstream American Culture and tested their psychometric properties. In 6 studies, we piloted the measures, conducted factor analyses to clarify their factor structure, and examined reliability and validity. The factor structure revealed 2 dimensions reflecting positive and negative affect for each measure. Results provided evidence for convergent, discriminant, criterion-related, and incremental validity as well as the reliability of the scales. The Feelings About Culture Scales are the first known measures to examine both positive and negative affect toward an individual's ethnic culture and mainstream American culture. The focus on affect captures dimensions of psychological experiences that differ from cognitive and behavioral constructs often used to measure cultural orientation. These measures can serve as a valuable contribution to both research and counseling by providing insight into the nuanced affective experiences ethnic minority individuals have toward culture. (c) 2015 APA, all rights reserved).

  18. Development, reliability and validity of the psychosocial adaptation scale for Parkinson's disease in Chinese population.

    Science.gov (United States)

    Zhang, Tingting; Yin, Anchun; Sun, Xiaohong; Liu, Qigui; Song, Guirong; Li, Lianhong

    2015-01-01

    To develop psychosocial adaptation scale for Parkinson's disease (PD) in Chinese population and evaluate its reliability and validity. The items were designed by literature review, expert consultation and semi-structured interview. The methods of corrected item-total correlation, discrimination analysis and exploratory factor analysis were used for items selection. 427 valid scales from PD patients were collected in the study to test the reliability and validity. The scale incorporated six dimensions: anxiety, self-esteem, attitude, self-acceptance, self-efficacy and social support, a total of 32 items. The scale possessed good internal consistency. The test-retest correlation coefficient was 0.99 and average content validation rate was 0.97. The Hoehn and Yahr stage were correlated with total score of the scale. The psychosocial adaptation scale in this study showed good reliability and validity, it can be used as a reliable and valid instrument to evaluate the psychosocial adaptation of PD objectively and effectively.

  19. Initial and transition cycle development for KALIMER uranium fueled core

    International Nuclear Information System (INIS)

    Kim, Sang Ji; Kim, Young In; Kim, Young Jin; Park, Chang Kue

    1998-01-01

    An economic and safe equilibrium Uranium metallic fuelled core having been established, strategic loading schemes for initial and transition cycles to early reach target equilibrium cycles are suggested for U-U and U-Pu transition cycles. An iterative method to find initial core enrichment splits is developed. With non-uniform feed enrichments at the initial core adopted, this iterative method shows KALIMER can reach Uranium equilibrium cycles just after 4 reloads, keeping feed enrichment unchanged from cycle 2. Recycling of self-generated Pu is not sufficient to make KALIMER a pure Pu equilibrium core even after 56 reloads. equilibrium cycles are suggested for U-U and U-Pu transition cycles. An iterative method to find initial core enrichment splits is developed. With non-uniform feed enrichments at the initial core adopted, this iterative method shows KALIMER can reach Uranium equilibrium cycles just after 4 reloads, keeping feed enrichment unchanged from cycle 2. Recycling of self-generated Pu is not sufficient to make KALIMER a pure Pu equilibrium core even after 56 reloads

  20. System reliability of corroding pipelines

    International Nuclear Information System (INIS)

    Zhou Wenxing

    2010-01-01

    A methodology is presented in this paper to evaluate the time-dependent system reliability of a pipeline segment that contains multiple active corrosion defects and is subjected to stochastic internal pressure loading. The pipeline segment is modeled as a series system with three distinctive failure modes due to corrosion, namely small leak, large leak and rupture. The internal pressure is characterized as a simple discrete stochastic process that consists of a sequence of independent and identically distributed random variables each acting over a period of one year. The magnitude of a given sequence follows the annual maximum pressure distribution. The methodology is illustrated through a hypothetical example. Furthermore, the impact of the spatial variability of the pressure loading and pipe resistances associated with different defects on the system reliability is investigated. The analysis results suggest that the spatial variability of pipe properties has a negligible impact on the system reliability. On the other hand, the spatial variability of the internal pressure, initial defect sizes and defect growth rates can have a significant impact on the system reliability.

  1. Development of A Standard Method for Human Reliability Analysis of Nuclear Power Plants

    International Nuclear Information System (INIS)

    Jung, Won Dea; Kang, Dae Il; Kim, Jae Whan

    2005-12-01

    According as the demand of risk-informed regulation and applications increase, the quality and reliability of a probabilistic safety assessment (PSA) has been more important. KAERI started a study to standardize the process and the rules of HRA (Human Reliability Analysis) which was known as a major contributor to the uncertainty of PSA. The study made progress as follows; assessing the level of quality of the HRAs in Korea and identifying the weaknesses of the HRAs, determining the requirements for developing a standard HRA method, developing the process and rules for quantifying human error probability. Since the risk-informed applications use the ASME PSA standard to ensure PSA quality, the standard HRA method was developed to meet the ASME HRA requirements with level of category II. The standard method was based on THERP and ASEP HRA that are widely used for conventional HRA. However, the method focuses on standardizing and specifying the analysis process, quantification rules and criteria to minimize the deviation of the analysis results caused by different analysts. Several HRA experts from different organizations in Korea participated in developing the standard method. Several case studies were interactively undertaken to verify the usability and applicability of the standard method

  2. Development of A Standard Method for Human Reliability Analysis of Nuclear Power Plants

    Energy Technology Data Exchange (ETDEWEB)

    Jung, Won Dea; Kang, Dae Il; Kim, Jae Whan

    2005-12-15

    According as the demand of risk-informed regulation and applications increase, the quality and reliability of a probabilistic safety assessment (PSA) has been more important. KAERI started a study to standardize the process and the rules of HRA (Human Reliability Analysis) which was known as a major contributor to the uncertainty of PSA. The study made progress as follows; assessing the level of quality of the HRAs in Korea and identifying the weaknesses of the HRAs, determining the requirements for developing a standard HRA method, developing the process and rules for quantifying human error probability. Since the risk-informed applications use the ASME PSA standard to ensure PSA quality, the standard HRA method was developed to meet the ASME HRA requirements with level of category II. The standard method was based on THERP and ASEP HRA that are widely used for conventional HRA. However, the method focuses on standardizing and specifying the analysis process, quantification rules and criteria to minimize the deviation of the analysis results caused by different analysts. Several HRA experts from different organizations in Korea participated in developing the standard method. Several case studies were interactively undertaken to verify the usability and applicability of the standard method.

  3. Problem of nuclear power plant reliability

    International Nuclear Information System (INIS)

    Popyrin, L.S.; Nefedov, Yu.V.

    1989-01-01

    The problem of substantiation of rational and methods of ensurance of NPP reliability at the stage of its designing has been studied. It is shown that the optimal level of NPP reliability is determined by coordinating solution of the proiblems for optimization of reliability of power industry, heat and power supply and nuclear power generation systems comprising NPP, and problems of reliability optimization of NPP proper, as a complex engineering system. The conclusion is made that the greatest attention should be paid to the development of mathematical models of reliability, taking into account different methods of equipment redundancy, as well as dependence of failures on barious factors, improvement of NPP reliability indices, development of data base, working out of the complec of consistent standards of reliability. 230 refs.; 2 figs.; 1 tab

  4. Reliability studies in research reactors

    International Nuclear Information System (INIS)

    Albuquerque, Tob Rodrigues de

    2013-01-01

    Fault trees and event trees are widely used in industry to model and to evaluate the reliability of safety systems. Detailed analyzes in nuclear installations require the combination of these two techniques. This study uses the methods of FT (Fault Tree) and ET (Event Tree) to accomplish the PSA (Probabilistic Safety Assessment) in research reactors. According to IAEA (lnternational Atomic Energy Agency), the PSA is divided into Level 1, Level 2 and Level 3. At the Level 1, conceptually, the security systems perform to prevent the occurrence of accidents, At the Level 2, once accidents happened, this Level seeks to minimize consequences, known as stage management of accident, and at Level 3 accident impacts are determined. This study focuses on analyzing the Level 1, and searching through the acquisition of knowledge, the consolidation of methodologies for future reliability studies. The Greek Research Reactor, GRR-1, is a case example. The LOCA (Loss of Coolant Accident) was chosen as the initiating event and from it, using ET, possible accidental sequences were developed, which could lead damage to the core. Moreover, for each of affected systems, probabilities of each event top of FT were developed and evaluated in possible accidental sequences. Also, the estimates of importance measures for basic events are presented in this work. The studies of this research were conducted using a commercial computational tool SAPHIRE. Additionally, achieved results thus were considered satisfactory for the performance or the failure of analyzed systems. (author)

  5. OSS reliability measurement and assessment

    CERN Document Server

    Yamada, Shigeru

    2016-01-01

    This book analyses quantitative open source software (OSS) reliability assessment and its applications, focusing on three major topic areas: the Fundamentals of OSS Quality/Reliability Measurement and Assessment; the Practical Applications of OSS Reliability Modelling; and Recent Developments in OSS Reliability Modelling. Offering an ideal reference guide for graduate students and researchers in reliability for open source software (OSS) and modelling, the book introduces several methods of reliability assessment for OSS including component-oriented reliability analysis based on analytic hierarchy process (AHP), analytic network process (ANP), and non-homogeneous Poisson process (NHPP) models, the stochastic differential equation models and hazard rate models. These measurement and management technologies are essential to producing and maintaining quality/reliable systems using OSS.

  6. The European reliability data system - ERDS: a state of the art and future developments

    International Nuclear Information System (INIS)

    Mancini, G.; Amesz, J.; Bastianini, P.; Capobianchi, S.

    1982-01-01

    In the frame of the Multiannual Nuclear Safety Programme of the Joint Research Centre of the Commisson of the European Communities, a project is being carried out aiming at the creation of a centralized data system collecting and organizing, at European level, information related to the operation of LWRs. The European Reliability Data System ERDS will exploit information already collected in national data systems and information deriving from single reactor sources. The paper describes the development of the four data systems constituting the ERDS: Component Event Data Bank; Abnormal Occurrences Reporting System; Operating Unit Status Report; Generic Reliability Parameter Data Bank

  7. Processes of enlightenment : farmer initiatives in rural development in China

    NARCIS (Netherlands)

    Ye, J.

    2002-01-01

    This research concerns development initiatives in rural communities. I define a farmer initiative as the impetus that sufficiently and necessarily drives a farmer (or group of farmers) to formulate a realistic strategic plan, and to implement it in an

  8. Electronics reliability calculation and design

    CERN Document Server

    Dummer, Geoffrey W A; Hiller, N

    1966-01-01

    Electronics Reliability-Calculation and Design provides an introduction to the fundamental concepts of reliability. The increasing complexity of electronic equipment has made problems in designing and manufacturing a reliable product more and more difficult. Specific techniques have been developed that enable designers to integrate reliability into their products, and reliability has become a science in its own right. The book begins with a discussion of basic mathematical and statistical concepts, including arithmetic mean, frequency distribution, median and mode, scatter or dispersion of mea

  9. Reliability-Based Optimal Design for Very Large Floating Structure

    Institute of Scientific and Technical Information of China (English)

    ZHANG Shu-hua(张淑华); FUJIKUBO Masahiko

    2003-01-01

    Costs and losses induced by possible future extreme environmental conditions and difficulties in repairing post-yielding damage strongly suggest the need for proper consideration in design rather than just life loss prevention. This can be addressed through the development of design methodology that balances the initial cost of the very large floating structure (VLFS) against the expected potential losses resulting from future extreme wave-induced structural damage. Here, the development of a methodology for determining optimal, cost-effective design will be presented and applied to a VLFS located in the Tokyo bay. Optimal design criteria are determined based on the total expected life-cycle cost and acceptable damage probability and curvature of the structure, and a set of sizes of the structure are obtained. The methodology and applications require expressions of the initial cost and the expected life-cycle damage cost as functions of the optimal design variables. This study includes the methodology, total life-cycle cost function, structural damage modeling, and reliability analysis.

  10. Can simple mobile phone applications provide reliable counts of respiratory rates in sick infants and children? An initial evaluation of three new applications.

    Science.gov (United States)

    Black, James; Gerdtz, Marie; Nicholson, Pat; Crellin, Dianne; Browning, Laura; Simpson, Julie; Bell, Lauren; Santamaria, Nick

    2015-05-01

    Respiratory rate is an important sign that is commonly either not recorded or recorded incorrectly. Mobile phone ownership is increasing even in resource-poor settings. Phone applications may improve the accuracy and ease of counting of respiratory rates. The study assessed the reliability and initial users' impressions of four mobile phone respiratory timer approaches, compared to a 60-second count by the same participants. Three mobile applications (applying four different counting approaches plus a standard 60-second count) were created using the Java Mobile Edition and tested on Nokia C1-01 phones. Apart from the 60-second timer application, the others included a counter based on the time for ten breaths, and three based on the time interval between breaths ('Once-per-Breath', in which the user presses for each breath and the application calculates the rate after 10 or 20 breaths, or after 60s). Nursing and physiotherapy students used the applications to count respiratory rates in a set of brief video recordings of children with different respiratory illnesses. Limits of agreement (compared to the same participant's standard 60-second count), intra-class correlation coefficients and standard errors of measurement were calculated to compare the reliability of the four approaches, and a usability questionnaire was completed by the participants. There was considerable variation in the counts, with large components of the variation related to the participants and the videos, as well as the methods. None of the methods was entirely reliable, with no limits of agreement better than -10 to +9 breaths/min. Some of the methods were superior to the others, with ICCs from 0.24 to 0.92. By ICC the Once-per-Breath 60-second count and the Once-per-Breath 20-breath count were the most consistent, better even than the 60-second count by the participants. The 10-breath approaches performed least well. Users' initial impressions were positive, with little difference between the

  11. African Initiated Churches’ potential as development actors

    Directory of Open Access Journals (Sweden)

    Philipp Öhlmann

    2016-11-01

    Full Text Available African Initiated Churches (AICs are not yet recognised as relevant actors of community development interventions. While it has been acknowledged that many of them provide coping mechanisms in adverse environments, support in social transformation and social capital, little information is available on their role as development actors. In this article, we evaluate the potential of AICs as partners of international development agencies for community development. We draw on interviews and focus group discussions with leaders of various AICs conducted in South Africa in February and March 2016. In particular, we examine the churches’ understanding of development, their view on the separation of spiritual and development activities and their priorities. Moreover, we outline the development activities which they are currently engaged in and analyse the structures they have in place to do so. Our findings indicate that AICs are increasingly active in community development and offer various entry points for possible cooperation.

  12. Reliability in automotive and mechanical engineering determination of component and system reliability

    CERN Document Server

    Bertsche, Bernd

    2008-01-01

    In the present contemporary climate of global competition in every branch of engineering and manufacture it has been shown from extensive customer surveys that above every other attribute, reliability stands as the most desired feature in a finished product. To survive this relentless fight for survival any organisation, which neglect the plea of attaining to excellence in reliability, will do so at a serious cost Reliability in Automotive and Mechanical Engineering draws together a wide spectrum of diverse and relevant applications and analyses on reliability engineering. This is distilled into this attractive and well documented volume and practising engineers are challenged with the formidable task of simultaneously improving reliability and reducing the costs and down-time due to maintenance. The volume brings together eleven chapters to highlight the importance of the interrelated reliability and maintenance disciplines. They represent the development trends and progress resulting in making this book ess...

  13. Reliability on the move: safety and reliability in transportation

    International Nuclear Information System (INIS)

    Guy, G.B.

    1989-01-01

    The development of transportation has been a significant factor in the development of civilisation as a whole. Our technical ability to move people and goods now seems virtually limitless when one considers for example the achievements of the various space programmes. Yet our current achievements rely heavily on high standards of safety and reliability from equipment and the human component of transportation systems. Recent failures have highlighted our dependence on equipment and human reliability. This book represents the proceedings of the 1989 Safety and Reliability Society symposium held at Bath on 11-12 October 1989. The structure of the book follows the structure of the symposium itself and the papers selected represent current thinking the the wide field of transportation, and the areas of rail (6 papers, three on railway signalling), air including space (two papers), road (one paper), road and rail (two papers) and sea (three papers) are covered. There are four papers concerned with general transport issues. Three papers concerned with the transport of radioactive materials are indexed separately. (author)

  14. Development of equipment reliability process using predictive technologies at Hamaoka Nuclear Power Station

    International Nuclear Information System (INIS)

    Taniguchi, Yuji; Sakuragi, Futoshi; Hamada, Seiichi

    2014-01-01

    Development of equipment reliability(ER) process, specifically for predictive maintenance (PdM) technologies integrated condition based maintenance (CBM) process, at Hamaoka Nuclear Power Station is introduced in this paper. Integration of predictive maintenance technologies such as vibration, oil analysis and thermo monitoring is more than important to establish strong maintenance strategies and to direct a specific technical development. In addition, a practical example of CBM is also presented to support the advantage of the idea. (author)

  15. A pulse-width modulated, high reliability charge controller for small photovoltaic systems

    Energy Technology Data Exchange (ETDEWEB)

    Gerken, K. [Morningstar Corp., Olney, MD (United States); Welsh, D. [Morningstar Corp., Encinitas, CA (United States)

    1997-02-01

    This report presents the results of a development effort to design, test and begin production of a new class of small photovoltaic (PV) charge controllers. Sandia National Laboratories provided technical support, test data and financial support through a Balance-of-System Development contract. One of the objectives of the development was to increase user confidence in small PV systems by improving the reliability and operating life of the system controllers. Another equally important objective was to improve the economics of small PV systems by extending the battery lifetimes. Using new technology and advanced manufacturing techniques, these objectives were accomplished. Because small stand-alone PV systems account for over one third of all PV modules shipped, the positive impact of improving the reliability and economics of PV systems in this market segment will be felt throughout the industry. The results of verification testing of the new product are also included in this report. The initial design goals and specifications were very aggressive, but the extensive testing demonstrates that all the goals were achieved. Production of the product started in May at a rate of 2,000 units per month. Over 40 Morningstar distributors (5 US and 35 overseas) have taken delivery in the first 2 months of shipments. Initial customer reactions to the new controller have been very favorable.

  16. Multidisciplinary System Reliability Analysis

    Science.gov (United States)

    Mahadevan, Sankaran; Han, Song; Chamis, Christos C. (Technical Monitor)

    2001-01-01

    The objective of this study is to develop a new methodology for estimating the reliability of engineering systems that encompass multiple disciplines. The methodology is formulated in the context of the NESSUS probabilistic structural analysis code, developed under the leadership of NASA Glenn Research Center. The NESSUS code has been successfully applied to the reliability estimation of a variety of structural engineering systems. This study examines whether the features of NESSUS could be used to investigate the reliability of systems in other disciplines such as heat transfer, fluid mechanics, electrical circuits etc., without considerable programming effort specific to each discipline. In this study, the mechanical equivalence between system behavior models in different disciplines are investigated to achieve this objective. A new methodology is presented for the analysis of heat transfer, fluid flow, and electrical circuit problems using the structural analysis routines within NESSUS, by utilizing the equivalence between the computational quantities in different disciplines. This technique is integrated with the fast probability integration and system reliability techniques within the NESSUS code, to successfully compute the system reliability of multidisciplinary systems. Traditional as well as progressive failure analysis methods for system reliability estimation are demonstrated, through a numerical example of a heat exchanger system involving failure modes in structural, heat transfer and fluid flow disciplines.

  17. Reliability Issues and Solutions in Flexible Electronics Under Mechanical Fatigue

    Science.gov (United States)

    Yi, Seol-Min; Choi, In-Suk; Kim, Byoung-Joon; Joo, Young-Chang

    2018-03-01

    Flexible devices are of significant interest due to their potential expansion of the application of smart devices into various fields, such as energy harvesting, biological applications and consumer electronics. Due to the mechanically dynamic operations of flexible electronics, their mechanical reliability must be thoroughly investigated to understand their failure mechanisms and lifetimes. Reliability issue caused by bending fatigue, one of the typical operational limitations of flexible electronics, has been studied using various test methodologies; however, electromechanical evaluations which are essential to assess the reliability of electronic devices for flexible applications had not been investigated because the testing method was not established. By employing the in situ bending fatigue test, we has studied the failure mechanism for various conditions and parameters, such as bending strain, fatigue area, film thickness, and lateral dimensions. Moreover, various methods for improving the bending reliability have been developed based on the failure mechanism. Nanostructures such as holes, pores, wires and composites of nanoparticles and nanotubes have been suggested for better reliability. Flexible devices were also investigated to find the potential failures initiated by complex structures under bending fatigue strain. In this review, the recent advances in test methodology, mechanism studies, and practical applications are introduced. Additionally, perspectives including the future advance to stretchable electronics are discussed based on the current achievements in research.

  18. NASA Applications and Lessons Learned in Reliability Engineering

    Science.gov (United States)

    Safie, Fayssal M.; Fuller, Raymond P.

    2011-01-01

    Since the Shuttle Challenger accident in 1986, communities across NASA have been developing and extensively using quantitative reliability and risk assessment methods in their decision making process. This paper discusses several reliability engineering applications that NASA has used over the year to support the design, development, and operation of critical space flight hardware. Specifically, the paper discusses several reliability engineering applications used by NASA in areas such as risk management, inspection policies, components upgrades, reliability growth, integrated failure analysis, and physics based probabilistic engineering analysis. In each of these areas, the paper provides a brief discussion of a case study to demonstrate the value added and the criticality of reliability engineering in supporting NASA project and program decisions to fly safely. Examples of these case studies discussed are reliability based life limit extension of Shuttle Space Main Engine (SSME) hardware, Reliability based inspection policies for Auxiliary Power Unit (APU) turbine disc, probabilistic structural engineering analysis for reliability prediction of the SSME alternate turbo-pump development, impact of ET foam reliability on the Space Shuttle System risk, and reliability based Space Shuttle upgrade for safety. Special attention is given in this paper to the physics based probabilistic engineering analysis applications and their critical role in evaluating the reliability of NASA development hardware including their potential use in a research and technology development environment.

  19. Initiatives to Reduce Earthquake Risk of Developing Countries

    Science.gov (United States)

    Tucker, B. E.

    2008-12-01

    The seventeen-year-and-counting history of the Palo Alto-based nonprofit organization GeoHazards International (GHI) is the story of many initiatives within a larger initiative to increase the societal impact of geophysics and civil engineering. GHI's mission is to reduce death and suffering due to earthquakes and other natural hazards in the world's most vulnerable communities through preparedness, mitigation and advocacy. GHI works by raising awareness in these communities about their risk and about affordable methods to manage it, identifying and strengthening institutions in these communities to manage their risk, and advocating improvement in natural disaster management. Some of GHI's successful initiatives include: (1) creating an earthquake scenario for Quito, Ecuador that describes in lay terms the consequences for that city of a probable earthquake; (2) improving the curricula of Pakistani university courses about seismic retrofitting; (3) training employees of the Public Works Department of Delhi, India on assessing the seismic vulnerability of critical facilities such as a school, a hospital, a police headquarters, and city hall; (4) assessing the vulnerability of the Library of Tibetan Works and Archives in Dharamsala, India; (5) developing a seismic hazard reduction plan for a nonprofit organization in Kathmandu, Nepal that works to manage Nepal's seismic risk; and (6) assisting in the formulation of a resolution by the Council of the Organization for Economic Cooperation and Development (OECD) to promote school earthquake safety among OECD member countries. GHI's most important resource, in addition to its staff and Board of Trustees, is its members and volunteer advisors, who include some of the world's leading earth scientists, earthquake engineers, urban planners and architects, from the academic, public, private and nonprofit sectors. GHI is planning several exciting initiatives in the near future. One would oversee the design and construction of

  20. Power system reliability analysis using fault trees

    International Nuclear Information System (INIS)

    Volkanovski, A.; Cepin, M.; Mavko, B.

    2006-01-01

    The power system reliability analysis method is developed from the aspect of reliable delivery of electrical energy to customers. The method is developed based on the fault tree analysis, which is widely applied in the Probabilistic Safety Assessment (PSA). The method is adapted for the power system reliability analysis. The method is developed in a way that only the basic reliability parameters of the analysed power system are necessary as an input for the calculation of reliability indices of the system. The modeling and analysis was performed on an example power system consisting of eight substations. The results include the level of reliability of current power system configuration, the combinations of component failures resulting in a failed power delivery to loads, and the importance factors for components and subsystems. (author)

  1. Evidence of Reliability and Validity for a Children’s Auditory Continuous Performance Test

    Directory of Open Access Journals (Sweden)

    Michael J. Lasee

    2013-11-01

    Full Text Available Continuous Performance Tests (CPTs are commonly utilized clinical measures of attention and response inhibition. While there have been many studies of CPTs that utilize a visual format, there is considerably less research employing auditory CPTs. The current study provides initial reliability and validity evidence for the Auditory Vigilance Screening Measure (AVSM, a newly developed CPT. Participants included 105 five- to nine-year-old children selected from two rural Midwestern school districts. Reliability data for the AVSM was collected through retesting of 42 participants. Validity was evaluated through correlation of AVSM scales with subscales from the ADHD Rating Scale–IV. Test–retest reliability coefficients ranged from .62 to .74 for AVSM subscales. A significant (r = .31 correlation was obtained between the AVSM Impulsivity Scale and teacher ratings of inattention. Limitations and implications for future study are discussed.

  2. Reliable avionics design for deep space

    Science.gov (United States)

    Johnson, Stephen B.

    The technical and organizational problems posed by the Space Exploration Initiative (SEI) are discussed, and some possible solutions are examined. It is pointed out that SEI poses a whole new set of challenging problems in the design of reliable systems. These missions and their corresponding systems are far more complex than current systems. The initiative requires a set of vehicles and systems which must have very high levels of autonomy, reliability, and operability for long periods of time. It is emphasized that to achieve these goals in the face of great complexity, new technologies and organizational techniques will be necessary. It is noted that the key to a good design is good people. Not only must good people be found, but they must be placed in positions appropriate to their skills. It is argued that the atomistic and autocratic paradigm of vertical organizations must be replaced with more team-oriented and democratic structures.

  3. Application of a methodology for the development and validation of reliable process control software

    International Nuclear Information System (INIS)

    Ramamoorthy, C.V.; Mok, Y.R.; Bastani, F.B.; Chin, G.

    1980-01-01

    The necessity of a good methodology for the development of reliable software, especially with respect to the final software validation and testing activities, is discussed. A formal specification development and validation methodology is proposed. This methodology has been applied to the development and validation of a pilot software, incorporating typical features of critical software for nuclear power plants safety protection. The main features of the approach include the use of a formal specification language and the independent development of two sets of specifications. 1 ref

  4. Integrated system reliability analysis

    DEFF Research Database (Denmark)

    Gintautas, Tomas; Sørensen, John Dalsgaard

    Specific targets: 1) The report shall describe the state of the art of reliability and risk-based assessment of wind turbine components. 2) Development of methodology for reliability and risk-based assessment of the wind turbine at system level. 3) Describe quantitative and qualitative measures...

  5. Assessing College Student-Athletes' Life Stress: Initial Measurement Development and Validation

    Science.gov (United States)

    Lu, Frank Jing-Horng; Hsu, Ya-Wen; Chan, Yuan-Shuo; Cheen, Jang-Rong; Kao, Kuei-Tsu

    2012-01-01

    College student-athletes have unique life stress that warrants close attention. The purpose of this study was to develop a reliable and valid measurement assessing college student-athletes' life stress. In Study 1, a focus group discussion and Delphi method produced a questionnaire draft, termed the College Student-Athletes' Life Stress Scale. In…

  6. Use of performance shaping factors and quantified expert judgment in the evaluation of human reliability: an initial appraisal

    International Nuclear Information System (INIS)

    Embrey, D.E.

    1983-05-01

    The first part of the report considers the nature of human reliability assessment, and the techniques currently employed. It is concluded that most approaches are limited by the availability of data. Approaches to the subjective assessment of error are surveyed. A particular technique which has been developed, the Success Likelihood Index Methodology (SLIM), is described in detail, together with the practical steps for its implementation. The results from a trial application of a questionnaire designed to elicit judges' perceptions of the relative importance of performance shaping factors in determining human reliability are analyzed. A revised form of the questionnaire is presented for future use. A pilot experiment to investigate the relationship between subjectively derived indices of success for six tasks and their objective probability of success is described. The results indicate that the SLIM has potential value as a predictive technique. Some requirements for a program of research to produce a generally applicable methodology are set out

  7. Development and Initial Validation of the Volition in Exercise Questionnaire (VEQ)

    DEFF Research Database (Denmark)

    Elsborg, P.; Wikman, J. M.; Nielsen, G.

    2017-01-01

    The present study describes the development and validation of an instrument to measure volition in the exercise context. Volition describes an individual’s self-regulatory mental processes that are responsible for taking and maintaining a desirable action (e.g., exercising regularly). The scale...... structure was developed in an exploratory factor analysis which resulted in a reliable structure of the following six factors: Volitional Inhibition—Reasons, Volitional Inhibition—Postponing Training, Volitional Facilitation—Self-Confidence, Volitional Inhibition—Unrelated Thoughts, Volitional Inhibition...

  8. 76 FR 2405 - Notice of Proposed Information Collection: Brownfield Economic Development Initiative (BEDI)

    Science.gov (United States)

    2011-01-13

    ... Information Collection: Brownfield Economic Development Initiative (BEDI) AGENCY: Office of the Assistant... proposed use: The Brownfield Economic Development Initiative is authorized pursuant to Section 108(q... applicable: HUD 40123, Brownfields Economic Development Application; SF-LLL, Disclosure of Lobbying...

  9. Self-help initiatives and rural development in Ibesikpo community of ...

    African Journals Online (AJOL)

    This study investigates the impact of self-help initiatives on rural development in Ibesikpo community of Akwa Ibom State, Nigeria. Self help initiatives were defined in terms of provision of employment, education and health-care. A sample size of 369 rural dwellers was drawn and data were analyzed using simple regression ...

  10. Some remarks on software reliability

    International Nuclear Information System (INIS)

    Gonzalez Hernando, J.; Sanchez Izquierdo, J.

    1978-01-01

    Trend in modern NPPCI is toward a broad use of programmable elements. Some aspects concerning present status of programmable digital systems reliability are reported. Basic differences between software and hardware concept require a specific approach in all the reliability topics concerning software systems. The software reliability theory was initialy developed upon hardware models analogies. At present this approach is changing and specific models are being developed. The growing use of programmable systems necessitates emphasizing the importance of more adequate regulatory requirements to include this technology in NPPCI. (author)

  11. Development of the GO-FLOW reliability analysis methodology for nuclear reactor system

    International Nuclear Information System (INIS)

    Matsuoka, Takeshi; Kobayashi, Michiyuki

    1994-01-01

    Probabilistic Safety Assessment (PSA) is important in the safety analysis of technological systems and processes, such as, nuclear plants, chemical and petroleum facilities, aerospace systems. Event trees and fault trees are the basic analytical tools that have been most frequently used for PSAs. Several system analysis methods can be used in addition to, or in support of, the event- and fault-tree analysis. The need for more advanced methods of system reliability analysis has grown with the increased complexity of engineered systems. The Ship Research Institute has been developing a new reliability analysis methodology, GO-FLOW, which is a success-oriented system analysis technique, and is capable of evaluating a large system with complex operational sequences. The research has been supported by the special research fund for Nuclear Technology, Science and Technology Agency, from 1989 to 1994. This paper describes the concept of the Probabilistic Safety Assessment (PSA), an overview of various system analysis techniques, an overview of the GO-FLOW methodology, the GO-FLOW analysis support system, procedure of treating a phased mission problem, a function of common cause failure analysis, a function of uncertainty analysis, a function of common cause failure analysis with uncertainty, and printing out system of the results of GO-FLOW analysis in the form of figure or table. Above functions are explained by analyzing sample systems, such as PWR AFWS, BWR ECCS. In the appendices, the structure of the GO-FLOW analysis programs and the meaning of the main variables defined in the GO-FLOW programs are described. The GO-FLOW methodology is a valuable and useful tool for system reliability analysis, and has a wide range of applications. With the development of the total system of the GO-FLOW, this methodology has became a powerful tool in a living PSA. (author) 54 refs

  12. Reliability evaluation of oil pipelines operating in aggressive environment

    Science.gov (United States)

    Magomedov, R. M.; Paizulaev, M. M.; Gebel, E. S.

    2017-08-01

    In connection with modern increased requirements for ecology and safety, the development of diagnostic services complex is obligatory and necessary enabling to ensure the reliable operation of the gas transportation infrastructure. Estimation of oil pipelines technical condition should be carried out not only to establish the current values of the equipment technological parameters in operation, but also to predict the dynamics of changes in the physical and mechanical characteristics of the material, the appearance of defects, etc. to ensure reliable and safe operation. In the paper, existing Russian and foreign methods for evaluation of the oil pipelines reliability are considered, taking into account one of the main factors leading to the appearance of crevice in the pipeline material, i.e. change the shape of its cross-section, - corrosion. Without compromising the generality of the reasoning, the assumption of uniform corrosion wear for the initial rectangular cross section has been made. As a result a formula for calculation the probability of failure-free operation was formulated. The proposed mathematical model makes it possible to predict emergency situations, as well as to determine optimal operating conditions for oil pipelines.

  13. Initial data collection efforts of CREDO. Sodium valve failures

    International Nuclear Information System (INIS)

    Bott, T.F.; Haas, P.M.

    1978-01-01

    The Centralized Reliability Data organisation (CREDO) has been established at Oak Ridge National Laboratory to define, develop, and maintain a reliability data analysis center for use in advanced reactor safety and licensing. Its primary functions are collection, reduction, evaluation, storage, retrieval, and dissemination of reliability/maintainability data. Data-collection efforts have been initiated at several test loops, at the Experimental Breeder Reactor-II and at the Fast Flux Test Facility. Top priority is being given to collection data on safety and safety-related systems, primarily for sodium-cooled reactors. Sufficient operating time has been accumulated on sodium valves at test facilities to provide quantitative estimates of reliability characteristics with a reasonable degree of confidence. Sodium-valve failures have been categorized according to seat design, size, seal type, and actuator type. Attempts have been made to establish the variation of failure rate with time and duty. Estimates of failure rates for sodium valves have been compared to those for water valves and appear to be of the same order of magnitude. (author)

  14. Development of a Taiwan cancer-related fatigue cognition questionnaire: reliability and validity.

    Science.gov (United States)

    Lai, Shih-Chiung; Lin, Wei-Chun; Chen, Chien-Hsin; Wu, Szu-Yuan

    2017-04-25

    We prospectively designed a Taiwan cancer-related fatigue cognition questionnaire, version 1.0 (TCRFCQ-V1.0), for Taiwanese patients with cancer and investigated the reliability and validity of this questionnaire. The completion rate of the TCRFCQ-V1.0 was high (97% of the patients completed all items), and the rate of missing data was low (0.2%-1.1% for each item). Moreover, the Cronbach alpha value was 0.889. We eliminated 5 items because their respective Cronbach alpha values were higher than the total mean value of Cronbach's alpha. Overall, the TCRFCQ-V1.0 had adequate Cronbach alpha coefficients (range, from 0.882 to 0.889). In addition, the results of Bartlett's test were significant (chi-squared, 2390.11; p Kaiser-Meyer-Olkin statistic of 0.868. Through exploratory factor analysis, we identified 6 factors with eigenvalues of > 1, and the scree plot indicated no flattening factors. Overall, 28 items achieved a factor loading of ≥ 0.55. We enrolled patients with cancer who were aged > 18 years, had received a pathological diagnosis of cancer, and had undergone cancer treatments such as surgery, chemotherapy, radiotherapy, or concurrent chemoradiotherapy at a single institute in Taiwan. Of the identified 167 eligible patients, 161 (96.4%) were approached. Of these patients, 6 (7.2%) declined to participate and 155 (92.8%) were interviewed. The initial 43 items in the TCRFCQ-V1.0 were assessed for ceiling and floor effects. The TCRFCQ-V1.0 is a reliable and valid instrument for measuring CRF cognition in Taiwanese patients with cancer.

  15. Foresight studies and reform initiatives in construction: Lessons for developing countries

    CSIR Research Space (South Africa)

    Van Wyk, Llewellyn V

    2006-01-01

    Full Text Available This paper analyses construction foresight studies and construction reform initiatives with a view to identifying lessons for developing countries. It notes the number of construction reform initiatives over the last 60 years, mostly...

  16. Development, reliability and validity of the psychosocial adaptation scale for Parkinson’s disease in Chinese population

    Science.gov (United States)

    Zhang, Tingting; Yin, Anchun; Sun, Xiaohong; Liu, Qigui; Song, Guirong; Li, Lianhong

    2015-01-01

    Objective: To develop psychosocial adaptation scale for Parkinson’s disease (PD) in Chinese population and evaluate its reliability and validity. Methods: The items were designed by literature review, expert consultation and semi-structured interview. The methods of corrected item-total correlation, discrimination analysis and exploratory factor analysis were used for items selection. 427 valid scales from PD patients were collected in the study to test the reliability and validity. Results: The scale incorporated six dimensions: anxiety, self-esteem, attitude, self-acceptance, self-efficacy and social support, a total of 32 items. The scale possessed good internal consistency. The test-retest correlation coefficient was 0.99 and average content validation rate was 0.97. The Hoehn and Yahr stage were correlated with total score of the scale. Conclusions: The psychosocial adaptation scale in this study showed good reliability and validity, it can be used as a reliable and valid instrument to evaluate the psychosocial adaptation of PD objectively and effectively. PMID:26770638

  17. Reliability-based condition assessment of steel containment and liners

    International Nuclear Information System (INIS)

    Ellingwood, B.; Bhattacharya, B.; Zheng, R.

    1996-11-01

    Steel containments and liners in nuclear power plants may be exposed to aggressive environments that may cause their strength and stiffness to decrease during the plant service life. Among the factors recognized as having the potential to cause structural deterioration are uniform, pitting or crevice corrosion; fatigue, including crack initiation and propagation to fracture; elevated temperature; and irradiation. The evaluation of steel containments and liners for continued service must provide assurance that they are able to withstand future extreme loads during the service period with a level of reliability that is sufficient for public safety. Rational methodologies to provide such assurances can be developed using modern structural reliability analysis principles that take uncertainties in loading, strength, and degradation resulting from environmental factors into account. The research described in this report is in support of the Steel Containments and Liners Program being conducted for the US Nuclear Regulatory Commission by the Oak Ridge National Laboratory. The research demonstrates the feasibility of using reliability analysis as a tool for performing condition assessments and service life predictions of steel containments and liners. Mathematical models that describe time-dependent changes in steel due to aggressive environmental factors are identified, and statistical data supporting the use of these models in time-dependent reliability analysis are summarized. The analysis of steel containment fragility is described, and simple illustrations of the impact on reliability of structural degradation are provided. The role of nondestructive evaluation in time-dependent reliability analysis, both in terms of defect detection and sizing, is examined. A Markov model provides a tool for accounting for time-dependent changes in damage condition of a structural component or system. 151 refs

  18. Development, content validity and test-retest reliability of the Lifelong Physical Activity Skills Battery in adolescents.

    Science.gov (United States)

    Hulteen, Ryan M; Barnett, Lisa M; Morgan, Philip J; Robinson, Leah E; Barton, Christian J; Wrotniak, Brian H; Lubans, David R

    2018-03-28

    Numerous skill batteries assess fundamental motor skill (e.g., kick, hop) competence. Few skill batteries examine lifelong physical activity skill competence (e.g., resistance training). This study aimed to develop and assess the content validity, test-retest and inter-rater reliability of the "Lifelong Physical Activity Skills Battery". Development of the skill battery occurred in three stages: i) systematic reviews of lifelong physical activity participation rates and existing motor skill assessment tools, ii) practitioner consultation and iii) research expert consultation. The final battery included eight skills: grapevine, golf swing, jog, push-up, squat, tennis forehand, upward dog and warrior I. Adolescents (28 boys, 29 girls; M = 15.8 years, SD = 0.4 years) completed the Lifelong Physical Activity Skills Battery on two occasions two weeks apart. The skill battery was highly reliable (ICC = 0.84, 95% CI = 0.72-0.90) with individual skill reliability scores ranging from moderate (warrior I; ICC = 0.56) to high (tennis forehand; ICC = 0.82). Typical error (4.0; 95% CI 3.4-5.0) and proportional bias (r = -0.21, p = .323) were low. This study has provided preliminary evidence for the content validity and reliability of the Lifelong Physical Activity Skills Battery in an adolescent population.

  19. Thermal Performance and Reliability Characterization of Bonded Interface Materials (BIMs): Preprint

    Energy Technology Data Exchange (ETDEWEB)

    DeVoto, D.; Paret, P.; Mihalic, M.; Narumanchi, S.; Bar-Cohen, A.; Matin, K.

    2014-08-01

    Thermal interface materials are an important enabler for low thermal resistance and reliable electronics packaging for a wide array of applications. There is a trend towards bonded interface materials (BIMs) because of their potential for low thermal resistivity (< 1 mm2K/W). However, BIMs induce thermomechanical stresses in the package and can be prone to failures and integrity risks. Deteriorated interfaces can result in high thermal resistance in the package and degradation and/or failure of the electronics. DARPA's Thermal Management Technologies program has addressed this challenge, supporting the development of mechanically-compliant, low resistivity nano-thermal interface (NTI) materials. In this work, we describe the testing procedure and report the results of NREL's thermal performance and reliability characterization of an initial sample of four different NTI-BIMs.

  20. Developing a contributing factor classification scheme for Rasmussen's AcciMap: Reliability and validity evaluation.

    Science.gov (United States)

    Goode, N; Salmon, P M; Taylor, N Z; Lenné, M G; Finch, C F

    2017-10-01

    One factor potentially limiting the uptake of Rasmussen's (1997) Accimap method by practitioners is the lack of a contributing factor classification scheme to guide accident analyses. This article evaluates the intra- and inter-rater reliability and criterion-referenced validity of a classification scheme developed to support the use of Accimap by led outdoor activity (LOA) practitioners. The classification scheme has two levels: the system level describes the actors, artefacts and activity context in terms of 14 codes; the descriptor level breaks the system level codes down into 107 specific contributing factors. The study involved 11 LOA practitioners using the scheme on two separate occasions to code a pre-determined list of contributing factors identified from four incident reports. Criterion-referenced validity was assessed by comparing the codes selected by LOA practitioners to those selected by the method creators. Mean intra-rater reliability scores at the system (M = 83.6%) and descriptor (M = 74%) levels were acceptable. Mean inter-rater reliability scores were not consistently acceptable for both coding attempts at the system level (M T1  = 68.8%; M T2  = 73.9%), and were poor at the descriptor level (M T1  = 58.5%; M T2  = 64.1%). Mean criterion referenced validity scores at the system level were acceptable (M T1  = 73.9%; M T2  = 75.3%). However, they were not consistently acceptable at the descriptor level (M T1  = 67.6%; M T2  = 70.8%). Overall, the results indicate that the classification scheme does not currently satisfy reliability and validity requirements, and that further work is required. The implications for the design and development of contributing factors classification schemes are discussed. Copyright © 2017 Elsevier Ltd. All rights reserved.

  1. Structural Reliability Methods

    DEFF Research Database (Denmark)

    Ditlevsen, Ove Dalager; Madsen, H. O.

    The structural reliability methods quantitatively treat the uncertainty of predicting the behaviour and properties of a structure given the uncertain properties of its geometry, materials, and the actions it is supposed to withstand. This book addresses the probabilistic methods for evaluation...... of structural reliability, including the theoretical basis for these methods. Partial safety factor codes under current practice are briefly introduced and discussed. A probabilistic code format for obtaining a formal reliability evaluation system that catches the most essential features of the nature...... of the uncertainties and their interplay is the developed, step-by-step. The concepts presented are illustrated by numerous examples throughout the text....

  2. Coal-Powered Electric Generating Unit Efficiency and Reliability Dialogue: Summary Report

    Energy Technology Data Exchange (ETDEWEB)

    Taylor, Emmanuel [Energetics, Inc., Columbia, MD (United States)

    2018-02-01

    findings and research suggestions discussed at the event. Discussions at the workshop will aid DOE in developing a set of distinct initiatives that can be pursued by government and industry to realize promising technological pursuits. DOE plans to use the results of the Dialogue coupled with ongoing technical analysis of efficiency opportunities within the coal-fired fleet, and additional studies to develop a comprehensive strategy for capitalizing on thermal efficiency improvements. Expected Power Plant Efficiency Improvements include developing cost-effective, efficient, and reliable technologies for boilers, turbines, and sensors and controls to improve the reliability and efficiency of existing coal-based power plants. The Office of Fossil Energy at DOE plans to work with industry to develop knowledge pertaining to advanced technologies and systems that industry can subsequently develop. These technologies and systems will increase reliability, add operational flexibility and improve efficiency, thereby providing more robust power generation infrastructure. The following table lists the research suggestions and questions for further investigation that were identified by participants in each session of the dialogue.

  3. TIGER reliability analysis in the DSN

    Science.gov (United States)

    Gunn, J. M.

    1982-01-01

    The TIGER algorithm, the inputs to the program and the output are described. TIGER is a computer program designed to simulate a system over a period of time to evaluate system reliability and availability. Results can be used in the Deep Space Network for initial spares provisioning and system evaluation.

  4. Development and reliability testing of a Health Action Process Approach inventory for physical activity participation among individuals with schizophrenia

    Directory of Open Access Journals (Sweden)

    Kelly eArbour-Nicitopoulos

    2014-06-01

    Full Text Available Individuals with schizophrenia tend to have high levels of cardiovascular disease and lower physical activity (PA levels than the general population. Research is urgently required in developing evidence-based behavioral interventions for increasing PA in this population. One model that has been increasingly used to understand the mechanisms underlying PA is the Health Action Process Approach (HAPA. The purpose of this study was to adapt and pilot-test a HAPA-based inventory that reliably captures salient, modifiable PA determinants for individuals with schizophrenia. Initially, twelve outpatients with schizophrenia reviewed the inventory and provided verbal feedback regarding comprehension, item relevance, and potential new content. A content analysis framework was used to inform modifications to the inventory. The resultant inventory underwent a quantitative assessment of internal consistency and test-retest reliability. Twenty-five outpatients (Mage= 41.5 ± 13.5 years; 64% male completed the inventory on two separate occasions, one week apart. All but two scales showed good internal consistency (Cronbach’s α=0.62–0.98 and test-retest correlations (rs = .21-.96. Preliminary assessment of criterion validity of the HAPA inventory showed significant, large-sized correlations between behavioural intentions and both affective outcome expectancies and task self-efficacy, and small-to-moderate correlations between self-reported minutes of moderate-to-vigorous PA and the volitional constructs of the HAPA model. These findings provide preliminary support for the reliability and validity of the first-ever inventory for examining theory-based predictors of moderate to vigorous PA intentions and behavior among individuals with schizophrenia. Further validation research with this inventory using an objective measure of PA behavior will provide additional support for its psychometric properties within the schizophrenia population.

  5. [Development of social activities-related daily life satisfaction scale for the elderly and evaluation of its reliability and validity].

    Science.gov (United States)

    Okamoto, Hideaki

    2010-07-01

    The purpose of this study was to develop a Social Activities-Related Daily Life Satisfaction Scale specifically applicable to elderly people in communities and to evaluate its reliability and validity. Sixteen items were extracted from an initial pool and assessed for inclusion in the scale by correlation and exploratory factor analyses. To confirm validity, confirmatory factor analysis was conducted and correlation coefficients were calculated. In addition, t-tests were performed in order to generate scores of the subscale related to activity. To prove reliability, Cronbach's coefficient alpha values were calculated. Data for 755 older adults aged 65 to 84 years were obtained from a mail survey in Ichikawa City, Chiba Prefecture. Exploratory factor analyses indicated that four factors, "satisfaction with learning" (four items), "satisfaction with usefulness to others and society" (four items), "satisfaction with health and physical strength" (three items), and "satisfaction with friends" (three items) should be extracted. Confirmatory factor analysis for assessing the 14-item four-factor model showed high goodness of fit indices (GFI = 0.943, AGFI = 0.915, RMSEA = 0.068). Concurrent validity was established by comparing the score of the scale with five external variables (Activity and Daily Life Satisfaction Scale for the Elderly, Life Satisfaction Index K, etc). Student's t-tests revealed that each score of the subscale was positively associated with activity variable. The overall Cronbach's coefficient alpha for the scale was 0.919 and for its four subscales values ranged from 0.814 to 0.887. A Social Activities-Related Daily Life Satisfaction Scale was derived consisting of four subscales, "satisfaction with learning", "satisfaction with usefulness to others and society", "satisfaction with health and physical strength", and "satisfaction with friends". The results of the present study suggested that the Social Activities-Related Daily Life Satisfaction Scale

  6. Gender and Women Development Initiatives in Bangladesh: A Study of Rural Mother Center.

    Science.gov (United States)

    Karim, K M Rabiul; Emmelin, Maria; Lindberg, Lene; Wamala, Sarah

    2016-01-01

    Women-focused development initiatives have become a controversial issue connected with women's health and welfare. Previous studies indicated that development initiatives might increase women's workload, family conflict, and marital violence. This study explored the gendered characteristics of a development initiative Rural Mother Center in Bangladesh. Data incorporated policy document and interviews of social workers working with the mother centers in two northwest subdistricts. The qualitative content analysis of data emerged a general theme of expanding women's responsibility while maintaining male privilege explaining gendered design and practice of the development initiative. The theme was supported by two gendered categories related to the design: (a) essentializing women's participation; (b) maintaining traditional gender, and four categories related to the practice; (c) inadequate gender knowledge and skills; (d) reinforcing traditional gender; (e) using women for improving office performance; and (f) upholding male privilege. The study suggests that though women-focused development initiatives need to be embraced with gender-redistributive policies, the social workers should be trained for attaining gender-transformative motivation and competencies.

  7. Hawaii Electric System Reliability

    Energy Technology Data Exchange (ETDEWEB)

    Loose, Verne William [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Silva Monroy, Cesar Augusto [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2012-08-01

    This report addresses Hawaii electric system reliability issues; greater emphasis is placed on short-term reliability but resource adequacy is reviewed in reference to electric consumers’ views of reliability “worth” and the reserve capacity required to deliver that value. The report begins with a description of the Hawaii electric system to the extent permitted by publicly available data. Electrical engineering literature in the area of electric reliability is researched and briefly reviewed. North American Electric Reliability Corporation standards and measures for generation and transmission are reviewed and identified as to their appropriateness for various portions of the electric grid and for application in Hawaii. Analysis of frequency data supplied by the State of Hawaii Public Utilities Commission is presented together with comparison and contrast of performance of each of the systems for two years, 2010 and 2011. Literature tracing the development of reliability economics is reviewed and referenced. A method is explained for integrating system cost with outage cost to determine the optimal resource adequacy given customers’ views of the value contributed by reliable electric supply. The report concludes with findings and recommendations for reliability in the State of Hawaii.

  8. Development of A Standard Method for Human Reliability Analysis (HRA) of Nuclear Power Plants

    International Nuclear Information System (INIS)

    Kang, Dae Il; Jung, Won Dea; Kim, Jae Whan

    2005-12-01

    According as the demand of risk-informed regulation and applications increase, the quality and reliability of a probabilistic safety assessment (PSA) has been more important. KAERI started a study to standardize the process and the rules of HRA (Human Reliability Analysis) which was known as a major contributor to the uncertainty of PSA. The study made progress as follows; assessing the level of quality of the HRAs in Korea and identifying the weaknesses of the HRAs, determining the requirements for developing a standard HRA method, developing the process and rules for quantifying human error probability. Since the risk-informed applications use the ASME and ANS PSA standard to ensure PSA quality, the standard HRA method was developed to meet the ASME and ANS HRA requirements with level of category II. The standard method was based on THERP and ASEP HRA that are widely used for conventional HRA. However, the method focuses on standardizing and specifying the analysis process, quantification rules and criteria to minimize the deviation of the analysis results caused by different analysts. Several HRA experts from different organizations in Korea participated in developing the standard method. Several case studies were interactively undertaken to verify the usability and applicability of the standard method

  9. Development of A Standard Method for Human Reliability Analysis (HRA) of Nuclear Power Plants

    Energy Technology Data Exchange (ETDEWEB)

    Kang, Dae Il; Jung, Won Dea; Kim, Jae Whan

    2005-12-15

    According as the demand of risk-informed regulation and applications increase, the quality and reliability of a probabilistic safety assessment (PSA) has been more important. KAERI started a study to standardize the process and the rules of HRA (Human Reliability Analysis) which was known as a major contributor to the uncertainty of PSA. The study made progress as follows; assessing the level of quality of the HRAs in Korea and identifying the weaknesses of the HRAs, determining the requirements for developing a standard HRA method, developing the process and rules for quantifying human error probability. Since the risk-informed applications use the ASME and ANS PSA standard to ensure PSA quality, the standard HRA method was developed to meet the ASME and ANS HRA requirements with level of category II. The standard method was based on THERP and ASEP HRA that are widely used for conventional HRA. However, the method focuses on standardizing and specifying the analysis process, quantification rules and criteria to minimize the deviation of the analysis results caused by different analysts. Several HRA experts from different organizations in Korea participated in developing the standard method. Several case studies were interactively undertaken to verify the usability and applicability of the standard method.

  10. Analysis of sodium valve reliability data at CREDO

    International Nuclear Information System (INIS)

    Bott, T.F.; Haas, P.M.

    1979-01-01

    The Centralized Reliability Data Organization (CREDO) has been established at Oak Ridge National Laboratory (ORNL) by the Department of Energy to provide a centralized source of data for reliability/maintainabilty analysis of advanced reactor systems. The current schedule calls for develoment of the data system at a moderate pace, with the first major distribution of data in late FY-1980. Continuous long-term collection of engineering, operating, and event data has been initiated at EBR-II and FFTF

  11. Reliability modeling of digital RPS with consideration of undetected software faults

    Energy Technology Data Exchange (ETDEWEB)

    Khalaquzzaman, M.; Lee, Seung Jun; Jung, Won Dea [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of); Kim, Man Cheol [Chung Ang Univ., Seoul (Korea, Republic of)

    2013-10-15

    This paper provides overview of different software reliability methodologies and proposes a technic for estimating the reliability of RPS with consideration of undetected software faults. Software reliability analysis of safety critical software has been challenging despite spending a huge effort for developing large number of software reliability models, and no consensus yet to attain on an appropriate modeling methodology. However, it is realized that the combined application of BBN based SDLC fault prediction method and random black-box testing of software would provide better ground for reliability estimation of safety critical software. Digitalizing the reactor protection system of nuclear power plant has been initiated several decades ago and now full digitalization has been adopted in the new generation of NPPs around the world because digital I and C systems have many better technical features like easier configurability and maintainability over analog I and C systems. Digital I and C systems are also drift-free and incorporation of new features is much easier. Rules and regulation for safe operation of NPPs are established and has been being practiced by the operators as well as regulators of NPPs to ensure safety. The failure mechanism of hardware and analog systems well understood and the risk analysis methods for these components and systems are well established. However, digitalization of I and C system in NPP introduces some crisis and uncertainty in reliability analysis methods of the digital systems/components because software failure mechanisms are still unclear.

  12. Writing for publication: faculty development initiative using social learning theory.

    Science.gov (United States)

    Sanderson, Bonnie K; Carter, Matt; Schuessler, Jenny B

    2012-01-01

    Demonstrating scholarly competency is an expectation for nurse faculty. However, there is hesitancy among some faculty to fully engage in scholarly activities. To strengthen a school of nursing's culture of scholarship, a faculty development writing initiative based on Social Learning Theory was implemented. The authors discuss this initiative to facilitate writing for publication productivity among faculty and the successful outcomes.

  13. Space transportation main engine reliability and safety

    Science.gov (United States)

    Monk, Jan C.

    1991-01-01

    Viewgraphs are used to illustrate the reliability engineering and aerospace safety of the Space Transportation Main Engine (STME). A technology developed is called Total Quality Management (TQM). The goal is to develop a robust design. Reducing process variability produces a product with improved reliability and safety. Some engine system design characteristics are identified which improves reliability.

  14. Development, test-retest reliability, and construct validity of the resistance training skills battery.

    Science.gov (United States)

    Lubans, David R; Smith, Jordan J; Harries, Simon K; Barnett, Lisa M; Faigenbaum, Avery D

    2014-05-01

    The aim of this study was to describe the development and assess test-retest reliability and construct validity of the Resistance Training Skills Battery (RTSB) for adolescents. The RTSB provides an assessment of resistance training skill competency and includes 6 exercises (i.e., body weight squat, push-up, lunge, suspended row, standing overhead press, and front support with chest touches). Scoring for each skill is based on the number of performance criteria successfully demonstrated. An overall resistance training skill quotient (RTSQ) is created by adding participants' scores for the 6 skills. Participants (44 boys and 19 girls, mean age = 14.5 ± 1.2 years) completed the RTSB on 2 occasions separated by 7 days. Participants also completed the following fitness tests, which were used to create a muscular fitness score (MFS): handgrip strength, timed push-up, and standing long jump tests. Intraclass correlation (ICC), paired samples t-tests, and typical error were used to assess test-retest reliability. To assess construct validity, gender and RTSQ were entered into a regression model predicting MFS. The rank order repeatability of the RTSQ was high (ICC = 0.88). The model explained 39% of the variance in MFS (p ≤ 0.001) and RTSQ (r = 0.40, p ≤ 0.001) was a significant predictor. This study has demonstrated the construct validity and test-retest reliability of the RTSB in a sample of adolescents. The RTSB can reliably rank participants in regards to their resistance training competency and has the necessary sensitivity to detect small changes in resistance training skill proficiency.

  15. Leadership in organizations with high security and reliability requirements; Liderazgo en organizaciones con altos requisitos de seguridad y fiabilidad

    Energy Technology Data Exchange (ETDEWEB)

    Gonzalez, F.

    2013-07-01

    Developing leadership skills in organizations is the key to ensure the sustain ability of excellent results in industries with high requirements safety and reliability. In order to have a model of leadership development specific to this type of organizations, Tecnatom in 2011, we initiated a project internal, to find and adapt a competency model to these requirements.

  16. Results of the event sequence reliability benchmark exercise

    International Nuclear Information System (INIS)

    Silvestri, E.

    1990-01-01

    The Event Sequence Reliability Benchmark Exercise is the fourth of a series of benchmark exercises on reliability and risk assessment, with specific reference to nuclear power plant applications, and is the logical continuation of the previous benchmark exercises on System Analysis Common Cause Failure and Human Factors. The reference plant is the Nuclear Power Plant at Grohnde Federal Republic of Germany a 1300 MW PWR plant of KWU design. The specific objective of the Exercise is to model, to quantify and to analyze such event sequences initiated by the occurrence of a loss of offsite power that involve the steam generator feed. The general aim is to develop a segment of a risk assessment, which ought to include all the specific aspects and models of quantification, such as common canal failure, Human Factors and System Analysis, developed in the previous reliability benchmark exercises, with the addition of the specific topics of dependences between homologous components belonging to different systems featuring in a given event sequence and of uncertainty quantification, to end up with an overall assessment of: - the state of the art in risk assessment and the relative influences of quantification problems in a general risk assessment framework. The Exercise has been carried out in two phases, both requiring modelling and quantification, with the second phase adopting more restrictive rules and fixing certain common data, as emerged necessary from the first phase. Fourteen teams have participated in the Exercise mostly from EEC countries, with one from Sweden and one from the USA. (author)

  17. Reliability and validity of the Parenting Scale of Inconsistency.

    Science.gov (United States)

    Yoshizumi, Takahiro; Murase, Satomi; Murakami, Takashi; Takai, Jiro

    2006-08-01

    The purposes of the present study were to develop a Parenting Scale of Inconsistency and to evaluate its initial reliability and validity. The 12 items assess the inconsistency among parents' moods, behaviors, and attitudes toward children. In the primary study, 517 participants completed three measures: the new Parenting Scale of Inconsistency, the Parental Bonding Instrument, and the Depression Scale of the General Health Questionnaire. The Parenting Scale of Inconsistency had good test-retest reliability of .85 and internal consistency of .88 (Cronbach coefficient alpha). Construct validity was good as Inconsistency scores were significantly correlated with the Care and Overprotection scores of the Parental Bonding Instrument and with the Depression scores. Moreover, Inconsistency scores' relation with a dimension of parenting style distinct from Care and Overprotection suggested that the Parenting Scale of Inconsistency had factorial validity. This scale seems a potential measure for examining the relationships between inconsistent parenting and the mental health of children.

  18. Reliability of construction materials

    International Nuclear Information System (INIS)

    Merz, H.

    1976-01-01

    One can also speak of reliability with respect to materials. While for reliability of components the MTBF (mean time between failures) is regarded as the main criterium, this is replaced with regard to materials by possible failure mechanisms like physical/chemical reaction mechanisms, disturbances of physical or chemical equilibrium, or other interactions or changes of system. The main tasks of the reliability analysis of materials therefore is the prediction of the various failure reasons, the identification of interactions, and the development of nondestructive testing methods. (RW) [de

  19. Diagnosing paratonia in the demented elderly: reliability and validity of the Paratonia Assessment Instrument (PAI).

    Science.gov (United States)

    Hobbelen, Johannes S M; Koopmans, Raymond T C M; Verhey, Frans R J; Habraken, Kitty M; de Bie, Rob A

    2008-08-01

    Paratonia is one of the associated movement disorders characteristic of dementia. The aim of this study was to develop an assessment tool (the Paratonia Assessment Instrument, PAI), based on the new consensus definition of paratonia. An additional aim was to investigate the reliability and validity of the PAI. A three-phase cross-sectional survey was conducted. In the first two phases, the PAI was developed and validated. In the third phase, the inter-observer reliability and feasibility of the instrument was tested. The original PAI consisted of five criteria that all needed to be met in order to make the diagnosis. On the basis of a qualitative analysis, one criterion was reformulated and another was removed. Following this, inter-observer reliability between the two assessors resulted in an improvement of Cohen's kappa from 0.532 in the initial phase to 0.677 in the second phase. This improvement was substantiated in the third phase by two independent assessors with Cohen's kappa ranging from 0.625 to 1. The PAI is a reliable and valid assessment tool for diagnosing paratonia in elderly people with dementia that can be applied easily in daily practice.

  20. Reliability of a positron emission tomography system (CTI: PT931/04-12)

    Energy Technology Data Exchange (ETDEWEB)

    Watanuki, Shoichi; Itoh, Masatoshi [Tohoku Univ., Sendai (Japan). Cyclotron and Radioisotope Center; Ishii, Keizo; Orihara, Hikonojyo [Tohoku Univ., Sendai (Japan). Graduate School of Engineering

    2002-05-01

    The maintenance data of a PET system (PT931/04-12 CTI Inc.) was analyzed to evaluate its reliability. We examined whether the initial performance for the system resolution and efficiency is kept. The reliability of the PET system was evaluated from the value of MTTF (mean time to failure) and MTBF (mean time between failures) for each part of the system obtained from the maintenance data for 13 years. The initial performance was kept for the resolution, but the efficiency decreased to 72% of the initial value. The 83% of the troubles of the system was for detector block (DB) and DB control module (BC). The MTTF of DB and BC were 2,733 and 3,314 days, and the MTBF of DB and BC per detector ring were 38 and 114 days. The MTBF of the system was 23 days. We found seasonal dependence for the number of troubles of DB and BC. This means that the trouble may be related the humidity. The reliability of the PET system strongly depends on the MTBF of DB and BC. The improvement in quality of these parts and optimization of the environment in operation may increase the reliability of the PET system. For the popularization of PET, it is effective to evaluate the reliability of the system and to show it to the users. (author)

  1. Manual on reliability data collection for research reactor PSAs

    Energy Technology Data Exchange (ETDEWEB)

    1992-01-01

    The IAEA has been actively promoting performance of probabilistic safety assessment (PSA) studies for research reactors. From 1986 to 1988 the IAEA undertook a Coordinated Research Programme (CRP) on PSA for research reactors which helped promote use of PSA and foster a broad exchange of information. Although the basic methodological approach in performing a research reactor PSA is understood, some unresolved issues, data availability being among them, still exist. To address the issue on the international level, the IAEA initiated a new CRP on ``Data Acquisition for Research Reactors PSA Studies``. The aim of the CRP is to develop a data collection system and generate research reactor specific reliability data for use in PSAs. The achieve this aim a set of precise definitions should be adopted. A set of definitions developed specifically for research reactors and covering classification of equipment and failure terms, reliability parameters, failure modes and other terms necessary for data collection and processing is presented in this document which is based on discussions during the first meeting of the CRP held in Vienna in October 1989 and during the second meeting held in Beijing, China, in October 1990. Refs and figs.

  2. Manual on reliability data collection for research reactor PSAs

    International Nuclear Information System (INIS)

    1992-01-01

    The IAEA has been actively promoting performance of probabilistic safety assessment (PSA) studies for research reactors. From 1986 to 1988 the IAEA undertook a Coordinated Research Programme (CRP) on PSA for research reactors which helped promote use of PSA and foster a broad exchange of information. Although the basic methodological approach in performing a research reactor PSA is understood, some unresolved issues, data availability being among them, still exist. To address the issue on the international level, the IAEA initiated a new CRP on ''Data Acquisition for Research Reactors PSA Studies''. The aim of the CRP is to develop a data collection system and generate research reactor specific reliability data for use in PSAs. The achieve this aim a set of precise definitions should be adopted. A set of definitions developed specifically for research reactors and covering classification of equipment and failure terms, reliability parameters, failure modes and other terms necessary for data collection and processing is presented in this document which is based on discussions during the first meeting of the CRP held in Vienna in October 1989 and during the second meeting held in Beijing, China, in October 1990. Refs and figs

  3. The prediction of reliability and residual life of reactor pressure components

    International Nuclear Information System (INIS)

    Nemec, J.; Antalovsky, S.

    1978-01-01

    The paper deals with the problem of PWR pressure components reliability and residual life evaluation and prediction. A physical model of damage cumulation which serves as a theoretical basis for all considerations presents two major aspects. The first one describes the dependence of the degree of damage in the crack leading-edge in pressure components on the reactor system load-time history, i.e. on the number of transient loads. Both stages, fatigue crack initiation and growth through the wall until the critical length is reached, are investigated. The crack is supposed to initiate at the flaws in a strength weld joint or in the bimetallic weld of the base ferritic steel and the austenitic stainless overlay cladding. The growth rates of developed cracks are analysed in respect to different load-time histories. Important cyclic properties of some steels are derived from the low-cycle fatigue theory. The second aspect is the load-time history-dependent process of precipitation, deformation and radiation aging, characterized entirely by the critical crack-length value mentioned above. The fracture point, defined by the equation ''crack-length=critical value'' and hence the residual life, can be evaluated using this model and verified by in-service inspection. The physical model described is randomized by considering all the parameters of the model as random. Monte Carlo methods are applied and fatigue crack initiation and growth is simulated. This permits evaluation of the reliability and residual life of the component. The distributions of material and load-time history parameters are needed for such simulation. Both the deterministic and computer-simulated probabilistic predictions of reliability and residual life are verified by prior-to-failure sequential testing of data coming from in-service NDT periodical inspections. (author)

  4. Assessment of the reliability of ultrasonic inspection methods

    International Nuclear Information System (INIS)

    Haines, N.F.; Langston, D.B.; Green, A.J.; Wilson, R.

    1982-01-01

    The reliability of NDT techniques has remained an open question for many years. A reliable technique may be defined as one that, when rigorously applied by a number of inspection teams, consistently finds then correctly sizes all defects of concern. In this paper we report an assessment of the reliability of defect detection by manual ultrasonic methods applied to the inspection of thick section pressure vessel weldments. Initially we consider the available data relating to the inherent physical capabilities of ultrasonic techniques to detect cracks in weldment and then, independently, we assess the likely variability in team to team performance when several teams are asked to follow the same specified test procedure. The two aspects of 'capability' and 'variability' are brought together to provide quantitative estimates of the overall reliability of ultrasonic inspection of thick section pressure vessel weldments based on currently existing data. The final section of the paper considers current research programmes on reliability and presents a view on how these will help to further improve NDT reliability. (author)

  5. Developing a Scale for Innovation Management at Schools: A Study of Validity and Reliability

    Science.gov (United States)

    Bulbul, Tuncer

    2012-01-01

    The purpose of this study is to develop a valid and reliable assessment tool for use in determining the competency beliefs of school administrators about innovation management. The scale applied to a study group of 216 school administrators, after work Centered on assessing intelligibility and specialized opinion. Exploratory and confirmatory…

  6. INL Human Resource Development and the Next-Generation Safeguards Initiative

    Energy Technology Data Exchange (ETDEWEB)

    Gouveia, Fernando; Metcalf, Richard Royce Madison

    2010-07-01

    It is the stated goal of the Next Generation Safeguards Initiative (NGSI) to promote the development of a strengthened nuclear safeguards base, one with the potential to advance the secure and peaceful implementation of nuclear energy world-wide. To meet this goal, the initiative, among other things, has sought to develop a revitalized effort to ensure the continued availability of next generation safeguards professionals. Accordingly, this paper serves to outline the human capital building strategies taken by Idaho National Laboratory (INL) in line with the NGSI. Various components are presented in detail, including INL’s efforts directed at university outreach, in particular the laboratory’s summer internship program, along with the development of various innovative training programs and long-term oriented strategies for student professional development. Special highlights include a video training series, developed by INL in cooperation with LLNL and other laboratories, which sought to expose students and entry-level professionals to the concept and practice of international nuclear safeguards.

  7. Prediction of software operational reliability using testing environment factors

    International Nuclear Information System (INIS)

    Jung, Hoan Sung; Seong, Poong Hyun

    1995-01-01

    A number of software reliability models have been developed to estimate and to predict software reliability. However, there are no established standard models to quantify software reliability. Most models estimate the quality of software in reliability figures such as remaining faults, failure rate, or mean time to next failure at the testing phase, and they consider them ultimate indicators of software reliability. Experience shows that there is a large gap between predicted reliability during development and reliability measured during operation, which means that predicted reliability, or so-called test reliability, is not operational reliability. Customers prefer operational reliability to test reliability. In this study, we propose a method that predicts operational reliability rather than test reliability by introducing the testing environment factor that quantifies the changes in environments

  8. Mathematical reliability an expository perspective

    CERN Document Server

    Mazzuchi, Thomas; Singpurwalla, Nozer

    2004-01-01

    In this volume consideration was given to more advanced theoretical approaches and novel applications of reliability to ensure that topics having a futuristic impact were specifically included. Topics like finance, forensics, information, and orthopedics, as well as the more traditional reliability topics were purposefully undertaken to make this collection different from the existing books in reliability. The entries have been categorized into seven parts, each emphasizing a theme that seems poised for the future development of reliability as an academic discipline with relevance. The seven parts are networks and systems; recurrent events; information and design; failure rate function and burn-in; software reliability and random environments; reliability in composites and orthopedics, and reliability in finance and forensics. Embedded within the above are some of the other currently active topics such as causality, cascading, exchangeability, expert testimony, hierarchical modeling, optimization and survival...

  9. Travel reliability inventory for Chicago.

    Science.gov (United States)

    2013-04-01

    The overarching goal of this research project is to enable state DOTs to document and monitor the reliability performance : of their highway networks. To this end, a computer tool, TRIC, was developed to produce travel reliability inventories from : ...

  10. Development and reliability of a structured interview guide for the Montgomery Asberg Depression Rating Scale (SIGMA).

    Science.gov (United States)

    Williams, Janet B W; Kobak, Kenneth A

    2008-01-01

    The Montgomery-Asberg Depression Rating Scale (MADRS) is often used in clinical trials to select patients and to assess treatment efficacy. The scale was originally published without suggested questions for clinicians to use in gathering the information necessary to rate the items. Structured and semi-structured interview guides have been found to improve reliability with other scales. To describe the development and test-retest reliability of a structured interview guide for the MADRS (SIGMA). A total of 162 test-retest interviews were conducted by 81 rater pairs. Each patient was interviewed twice, once by each rater conducting an independent interview. The intraclass correlation for total score between raters using the SIGMA was r=0.93, Preliability. Use of the SIGMA can result in high reliability of MADRS scores in evaluating patients with depression.

  11. Development of a Saudi Food Frequency Questionnaire and testing its reliability and validity.

    Science.gov (United States)

    Gosadi, Ibrahim M; Alatar, Abdullah A; Otayf, Mojahed M; AlJahani, Dhaherah M; Ghabbani, Hisham M; AlRajban, Waleed A; Alrsheed, Abdullah M; Al-Nasser, Khalid A

    2017-06-01

    To create a food frequency questionnaire specifically designed to capture the dietary habits of Saudis and test its validity and reliability. Methods: This investigation is a longitudinal, test-retest study conducted in King Saud University, Riyadh, Kingdom of Saudi Arabia between December 2015 and March 2016. A list of 140 food items was included in the questionnaire where a closed-ended and open-ended approach was used. Regarding past   year food frequency consumption and 24 hours dietary recall, body weight and height were collected. Internal consistency, test-retest reliability, completeness of the food list, and criterion validity were assessed. Results: One-hundred and thirty eight participants were interviewed to complete the 24 hours dietary recall and the constructed questionnaire. Approximately 85% of the food items reported in the dietary recall were covered in the food frequency questionnaire. The association of body mass index with meats (regression coefficients: 2.28) and dairy products consumption frequency was statistically significant (regression coefficients: 2.31). A high overall reproducibility rate of the questionnaire was detected (Pearsons' correlation coefficient: 0.78 p less than 0.001).  Conclusion: The developed questionnaire has a high reliability and reasonable validity, and suitable for use in nutritional epidemiological investigations in Saudi Arabia.

  12. pupil initiatives in urban nature trail development: pmb moss

    African Journals Online (AJOL)

    .ritzburg is provided. Negotiations and procedures initiated by standard 9 pupils in stimulating authorities and the public to recog~ nise the need for urban trail development and metropolitan open space. (MOSS) are outlined. long-tenn ...

  13. Men's Perceptions of Women's Participation in Development Initiatives in Rural Bangladesh.

    Science.gov (United States)

    Karim, Rabiul; Lindberg, Lene; Wamala, Sarah; Emmelin, Maria

    2018-03-01

    Without taking masculine issues into account, women's participation in development initiatives does not always guarantee their empowerment, health, and welfare in a male-dominated society. This study aimed to explore men's perceptions of women's participation in development (WPD) in rural Bangladesh. In adopting a qualitative approach, the study examined 48 purposively selected married and unmarried men aged 20-76 years in three northwest villages. Data collection was accomplished through four focus group discussions (FGDs) with 43 men clustered into four groups and through individual interviews with five other men. A qualitative content analysis of the data revealed an overall theme of "feeling challenged by fears and hopes," indicating variations in men's views on women's participation in development initiatives as represented by three main categories: (a) fearing the loss of male authority, (b) recognizing women's roles in enhancing family welfare, and (c) valuing women's independence. In the context of dominant patriarchal traditions in Bangladesh, these findings provide new insight into dynamics and variations of men's views, suggesting a need to better engage men during different stages of women-focused development initiatives.

  14. Development and inter-rater reliability of a standardized verbal instruction manual for the Chinese Geriatric Depression Scale-short form.

    Science.gov (United States)

    Wong, M T P; Ho, T P; Ho, M Y; Yu, C S; Wong, Y H; Lee, S Y

    2002-05-01

    The Geriatric Depression Scale (GDS) is a common screening tool for elderly depression in Hong Kong. This study aimed at (1) developing a standardized manual for the verbal administration and scoring of the GDS-SF, and (2) comparing the inter-rater reliability between the standardized and non-standardized verbal administration of GDS-SF. Two studies were reported. In Study 1, the process of developing the manual was described. In Study 2, we compared the inter-rater reliabilities of GDS-SF scores using the standardized verbal instructions and the traditional non-standardized administration. Results of Study 2 indicated that the standardized procedure in verbal administration and scoring improved the inter-rater reliabilities of GDS-SF. Copyright 2002 John Wiley & Sons, Ltd.

  15. Reliability database of IEA-R1 Brazilian research reactor: Applications to the improvement of installation safety

    International Nuclear Information System (INIS)

    Oliveira, P.S.P.; Tondin, J.B.M.; Martins, M.O.; Yovanovich, M.; Ricci Filho, W.

    2010-01-01

    In this paper the main features of the reliability database being developed at Ipen-Cnen/SP for IEA-R1 reactor are briefly described. Besides that, the process for collection and updating of data regarding operation, failure and maintenance of IEA-R1 reactor components is presented. These activities have been conducted by the reactor personnel under the supervision of specialists in Probabilistic Safety Analysis (PSA). The compilation of data and subsequent calculation are based on the procedures defined during an IAEA Coordinated Research Project which Brazil took part in the period from 2001 to 2004. In addition to component reliability data, the database stores data on accident initiating events and human errors. Furthermore, this work discusses the experience acquired through the development of the reliability database covering aspects like improvements in the reactor records as well as the application of the results to the optimization of operation and maintenance procedures and to the PSA carried out for IEA-R1 reactor. (author)

  16. Development and Psychometric Evaluation of the Personal Growth Initiative Scale-II

    Science.gov (United States)

    Robitschek, Christine; Ashton, Matthew W.; Spering, Cynthia C.; Geiger, Nathaniel; Byers, Danielle; Schotts, G. Christian; Thoen, Megan A.

    2012-01-01

    The original Personal Growth Initiative Scale (PGIS; Robitschek, 1998) was unidimensional, despite theory identifying multiple components (e.g., cognition and behavior) of personal growth initiative (PGI). The present research developed a multidimensional measure of the complex process of PGI, while retaining the brief and psychometrically sound…

  17. Reliability analysis based on the losses from failures.

    Science.gov (United States)

    Todinov, M T

    2006-04-01

    The conventional reliability analysis is based on the premise that increasing the reliability of a system will decrease the losses from failures. On the basis of counterexamples, it is demonstrated that this is valid only if all failures are associated with the same losses. In case of failures associated with different losses, a system with larger reliability is not necessarily characterized by smaller losses from failures. Consequently, a theoretical framework and models are proposed for a reliability analysis, linking reliability and the losses from failures. Equations related to the distributions of the potential losses from failure have been derived. It is argued that the classical risk equation only estimates the average value of the potential losses from failure and does not provide insight into the variability associated with the potential losses. Equations have also been derived for determining the potential and the expected losses from failures for nonrepairable and repairable systems with components arranged in series, with arbitrary life distributions. The equations are also valid for systems/components with multiple mutually exclusive failure modes. The expected losses given failure is a linear combination of the expected losses from failure associated with the separate failure modes scaled by the conditional probabilities with which the failure modes initiate failure. On this basis, an efficient method for simplifying complex reliability block diagrams has been developed. Branches of components arranged in series whose failures are mutually exclusive can be reduced to single components with equivalent hazard rate, downtime, and expected costs associated with intervention and repair. A model for estimating the expected losses from early-life failures has also been developed. For a specified time interval, the expected losses from early-life failures are a sum of the products of the expected number of failures in the specified time intervals covering the

  18. Hawaii electric system reliability.

    Energy Technology Data Exchange (ETDEWEB)

    Silva Monroy, Cesar Augusto; Loose, Verne William

    2012-09-01

    This report addresses Hawaii electric system reliability issues; greater emphasis is placed on short-term reliability but resource adequacy is reviewed in reference to electric consumers' views of reliability %E2%80%9Cworth%E2%80%9D and the reserve capacity required to deliver that value. The report begins with a description of the Hawaii electric system to the extent permitted by publicly available data. Electrical engineering literature in the area of electric reliability is researched and briefly reviewed. North American Electric Reliability Corporation standards and measures for generation and transmission are reviewed and identified as to their appropriateness for various portions of the electric grid and for application in Hawaii. Analysis of frequency data supplied by the State of Hawaii Public Utilities Commission is presented together with comparison and contrast of performance of each of the systems for two years, 2010 and 2011. Literature tracing the development of reliability economics is reviewed and referenced. A method is explained for integrating system cost with outage cost to determine the optimal resource adequacy given customers' views of the value contributed by reliable electric supply. The report concludes with findings and recommendations for reliability in the State of Hawaii.

  19. Emergency diesel generator reliability program

    International Nuclear Information System (INIS)

    Serkiz, A.W.

    1989-01-01

    The need for an emergency diesel generator (EDG) reliability program has been established by 10 CFR Part 50, Section 50.63, Loss of All Alternating Current Power, which requires that utilities assess their station blackout duration and recovery capability. EDGs are the principal emergency ac power sources for coping with a station blackout. Regulatory Guide 1.155, Station Blackout, identifies a need for (1) an EDG reliability equal to or greater than 0.95, and (2) an EDG reliability program to monitor and maintain the required levels. The resolution of Generic Safety Issue (GSI) B-56 embodies the identification of a suitable EDG reliability program structure, revision of pertinent regulatory guides and Tech Specs, and development of an Inspection Module. Resolution of B-56 is coupled to the resolution of Unresolved Safety Issue (USI) A-44, Station Blackout, which resulted in the station blackout rule, 10 CFR 50.63 and Regulatory Guide 1.155, Station Blackout. This paper discusses the principal elements of an EDG reliability program developed for resolving GSI B-56 and related matters

  20. Test of gross motor development-2 for Filipino children with intellectual disability: validity and reliability.

    Science.gov (United States)

    Capio, Catherine M; Eguia, Kathlynne F; Simons, Johan

    2016-01-01

    This study aimed to examine aspects of validity and reliability of the Test of Gross Motor Development-2 (TGMD-2) in Filipino children with intellectual disability. Content and construct validity were verified, as well as inter-rater and intra-rater reliability. Two paediatric physiotherapists tested 81 children with intellectual disability (mean age = 9.29 ± 2.71 years) on locomotor and object control skills. Analysis of covariance, confirmatory factor analysis and analysis of variance were used to test validity, while Cronbach's alpha, intra-class correlation coefficients (ICC) and Bland-Altman plots were used to examine reliability. Age was a significant predictor of locomotor and object control scores (P = 0.004). The data fit the hypothesised two-factor model with fit indices as follows: χ(2) = 33.525, DF = 34, P = 0.491, χ(2)/DF = 0.986. As hypothesised, gender was a significant predictor for object control skills (P = 0.038). Participants' mean scores were significantly below mastery (locomotor, P intellectual disability.

  1. Tradition as an initiator of rural tourism destinations development

    Directory of Open Access Journals (Sweden)

    Antić Aleksandar

    2015-01-01

    Full Text Available Rural tourism is a form of tourism that best illustrates the importance of tradition in the development of tourist destinations. Music, dance, clothing, culinary specialties of local cuisine, unique natural beauty and the very mentality and hospitality of people in rural areas, represent some of the factors that influence the tourist's consciousness when choosing this type of holiday. The research is focused on the main hypothesis that the tradition is an initiator of rural tourism destinations development. Furthermore, this would imply positive effects in the field of tourism and economy in general and the economy of the region. The goal of the paper is to show the importance of tradition in the cultural identity of rural areas and potentials of tradition in the role of initiating rural tourism destinations development. The interview with staff members in Pozarevac Tourism Organization has helped in the SWOT analysis of the observed rural destination. An empirical research is conducted on a random sample of 232 participants in order to highlight the benefits of rural tourism development in Pozarevac and its surrounding area. The data were processed in SPSS program (version 17.0.

  2. Reliability engineering

    International Nuclear Information System (INIS)

    Lee, Chi Woo; Kim, Sun Jin; Lee, Seung Woo; Jeong, Sang Yeong

    1993-08-01

    This book start what is reliability? such as origin of reliability problems, definition of reliability and reliability and use of reliability. It also deals with probability and calculation of reliability, reliability function and failure rate, probability distribution of reliability, assumption of MTBF, process of probability distribution, down time, maintainability and availability, break down maintenance and preventive maintenance design of reliability, design of reliability for prediction and statistics, reliability test, reliability data and design and management of reliability.

  3. Real Time Grid Reliability Management 2005

    Energy Technology Data Exchange (ETDEWEB)

    Eto, Joe; Eto, Joe; Lesieutre, Bernard; Lewis, Nancy Jo; Parashar, Manu

    2008-07-07

    The increased need to manage California?s electricity grid in real time is a result of the ongoing transition from a system operated by vertically-integrated utilities serving native loads to one operated by an independent system operator supporting competitive energy markets. During this transition period, the traditional approach to reliability management -- construction of new transmission lines -- has not been pursued due to unresolved issues related to the financing and recovery of transmission project costs. In the absence of investments in new transmission infrastructure, the best strategy for managing reliability is to equip system operators with better real-time information about actual operating margins so that they can better understand and manage the risk of operating closer to the edge. A companion strategy is to address known deficiencies in offline modeling tools that are needed to ground the use of improved real-time tools. This project: (1) developed and conducted first-ever demonstrations of two prototype real-time software tools for voltage security assessment and phasor monitoring; and (2) prepared a scoping study on improving load and generator response models. Additional funding through two separate subsequent work authorizations has already been provided to build upon the work initiated in this project.

  4. Oil for development initiative annual report 2010

    International Nuclear Information System (INIS)

    2011-01-01

    In 2010, Oil for Development continued to develop its role as a key actor within the field of petroleum related development assistance. Five years after the programme started, we experience a steady demand for our product, which is to provide advice and competence building within petroleum sector management. Our cooperating partners are government agencies and to a lesser extent civil society organizations and parliamentary committees.Main trends in 2010 include the following: OfD continued to be a high priority programme in Norwegian development cooperation. The budget spending was Nok 222 million, 15 million higher than in 2009. The programme provided tailor made assistance to more than 20 countries, taking a holistic approach towards petroleum sector management. This implies that resource management, revenue management and environmental management are addressed in a coordinated manner, and that principles of good governance, such as anti-corruption, transparency and accountability, are cross-cutting. The funding for regional initiatives and South-South cooperation was doubled. (au)

  5. Oil for development initiative annual report 2010

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2011-07-01

    In 2010, Oil for Development continued to develop its role as a key actor within the field of petroleum related development assistance. Five years after the programme started, we experience a steady demand for our product, which is to provide advice and competence building within petroleum sector management. Our cooperating partners are government agencies and to a lesser extent civil society organizations and parliamentary committees.Main trends in 2010 include the following: OfD continued to be a high priority programme in Norwegian development cooperation. The budget spending was Nok 222 million, 15 million higher than in 2009. The programme provided tailor made assistance to more than 20 countries, taking a holistic approach towards petroleum sector management. This implies that resource management, revenue management and environmental management are addressed in a coordinated manner, and that principles of good governance, such as anti-corruption, transparency and accountability, are cross-cutting. The funding for regional initiatives and South-South cooperation was doubled. (au)

  6. Initial Development and Validation of the BullyHARM: The Bullying, Harassment, and Aggression Receipt Measure

    Science.gov (United States)

    Hall, William J.

    2017-01-01

    This article describes the development and preliminary validation of the Bullying, Harassment, and Aggression Receipt Measure (BullyHARM). The development of the BullyHARM involved a number of steps and methods, including a literature review, expert review, cognitive testing, readability testing, data collection from a large sample, reliability testing, and confirmatory factor analysis. A sample of 275 middle school students was used to examine the psychometric properties and factor structure of the BullyHARM, which consists of 22 items and 6 subscales: physical bullying, verbal bullying, social/relational bullying, cyber-bullying, property bullying, and sexual bullying. First-order and second-order factor models were evaluated. Results demonstrate that the first-order factor model had superior fit. Results of reliability testing indicate that the BullyHARM scale and subscales have very good internal consistency reliability. Findings indicate that the BullyHARM has good properties regarding content validation and respondent-related validation and is a promising instrument for measuring bullying victimization in school. PMID:28194041

  7. The BRAIN Initiative: developing technology to catalyse neuroscience discovery

    Science.gov (United States)

    Jorgenson, Lyric A.; Newsome, William T.; Anderson, David J.; Bargmann, Cornelia I.; Brown, Emery N.; Deisseroth, Karl; Donoghue, John P.; Hudson, Kathy L.; Ling, Geoffrey S. F.; MacLeish, Peter R.; Marder, Eve; Normann, Richard A.; Sanes, Joshua R.; Schnitzer, Mark J.; Sejnowski, Terrence J.; Tank, David W.; Tsien, Roger Y.; Ugurbil, Kamil; Wingfield, John C.

    2015-01-01

    The evolution of the field of neuroscience has been propelled by the advent of novel technological capabilities, and the pace at which these capabilities are being developed has accelerated dramatically in the past decade. Capitalizing on this momentum, the United States launched the Brain Research through Advancing Innovative Neurotechnologies (BRAIN) Initiative to develop and apply new tools and technologies for revolutionizing our understanding of the brain. In this article, we review the scientific vision for this initiative set forth by the National Institutes of Health and discuss its implications for the future of neuroscience research. Particular emphasis is given to its potential impact on the mapping and study of neural circuits, and how this knowledge will transform our understanding of the complexity of the human brain and its diverse array of behaviours, perceptions, thoughts and emotions. PMID:25823863

  8. The reliable solution and computation time of variable parameters Logistic model

    OpenAIRE

    Pengfei, Wang; Xinnong, Pan

    2016-01-01

    The reliable computation time (RCT, marked as Tc) when applying a double precision computation of a variable parameters logistic map (VPLM) is studied. First, using the method proposed, the reliable solutions for the logistic map are obtained. Second, for a time-dependent non-stationary parameters VPLM, 10000 samples of reliable experiments are constructed, and the mean Tc is then computed. The results indicate that for each different initial value, the Tcs of the VPLM are generally different...

  9. Software reliability models for critical applications

    Energy Technology Data Exchange (ETDEWEB)

    Pham, H.; Pham, M.

    1991-12-01

    This report presents the results of the first phase of the ongoing EG&G Idaho, Inc. Software Reliability Research Program. The program is studying the existing software reliability models and proposes a state-of-the-art software reliability model that is relevant to the nuclear reactor control environment. This report consists of three parts: (1) summaries of the literature review of existing software reliability and fault tolerant software reliability models and their related issues, (2) proposed technique for software reliability enhancement, and (3) general discussion and future research. The development of this proposed state-of-the-art software reliability model will be performed in the second place. 407 refs., 4 figs., 2 tabs.

  10. Software reliability models for critical applications

    Energy Technology Data Exchange (ETDEWEB)

    Pham, H.; Pham, M.

    1991-12-01

    This report presents the results of the first phase of the ongoing EG G Idaho, Inc. Software Reliability Research Program. The program is studying the existing software reliability models and proposes a state-of-the-art software reliability model that is relevant to the nuclear reactor control environment. This report consists of three parts: (1) summaries of the literature review of existing software reliability and fault tolerant software reliability models and their related issues, (2) proposed technique for software reliability enhancement, and (3) general discussion and future research. The development of this proposed state-of-the-art software reliability model will be performed in the second place. 407 refs., 4 figs., 2 tabs.

  11. Reliability assessment of hydraulic cylinders considering service loads and flaw distribution

    International Nuclear Information System (INIS)

    Altamura, Alessandra; Beretta, Stefano

    2012-01-01

    Manufacturing process, service conditions and material properties are all necessary requirements to a good design of tubular mechanical components subjected to fatigue. The most common approach to this design is usually deterministic, where a fixed NDT threshold, related to flaw acceptance limit, is set. However many uncertainties are left aside, i.e. the failure probability related to the fatigue strength under applied loads. This paper addresses the reliability evaluation of tubular mechanical components carrying some flaws and subjected to cyclic internal pressure variation. The aim is comparing the probability of failure obtained under several assumptions. A reliability assessment model, based on a random variable approach, has been implemented by using the Monte Carlo method. The analysis of the results, from a case study based on load spectra measurements of hydraulic cylinders of earth moving machines, has consented to evaluate the most important factors influencing the fatigue life prediction of these components. Highlights: ► Reliability evaluation of tubular components subjected to variable internal pressure. ► The dispersion of the threshold controls the stochasticity of crack growth. ► A random variable model has been developed using Monte Carlo. ► Initial crack size and spectrum shape are key factors in reliability evaluation.

  12. Reliability databases: State-of-the-art and perspectives

    DEFF Research Database (Denmark)

    Akhmedjanov, Farit

    2001-01-01

    The report gives a history of development and an overview of the existing reliability databases. This overview also describes some other (than computer databases) sources of reliability and failures information, e.g. reliability handbooks, but the mainattention is paid to standard models...... and software packages containing the data mentioned. The standards corresponding to collection and exchange of reliability data are observed too. Finally, perspective directions in such data sources development areshown....

  13. Product manufacturing, quality, and reliability initiatives to maintain a competitive advantage and meet customer expectations in the semiconductor industry

    Science.gov (United States)

    Capps, Gregory

    Semiconductor products are manufactured and consumed across the world. The semiconductor industry is constantly striving to manufacture products with greater performance, improved efficiency, less energy consumption, smaller feature sizes, thinner gate oxides, and faster speeds. Customers have pushed towards zero defects and require a more reliable, higher quality product than ever before. Manufacturers are required to improve yields, reduce operating costs, and increase revenue to maintain a competitive advantage. Opportunities exist for integrated circuit (IC) customers and manufacturers to work together and independently to reduce costs, eliminate waste, reduce defects, reduce warranty returns, and improve quality. This project focuses on electrical over-stress (EOS) and re-test okay (RTOK), two top failure return mechanisms, which both make great defect reduction opportunities in customer-manufacturer relationship. Proactive continuous improvement initiatives and methodologies are addressed with emphasis on product life cycle, manufacturing processes, test, statistical process control (SPC), industry best practices, customer education, and customer-manufacturer interaction.

  14. Multi-Disciplinary System Reliability Analysis

    Science.gov (United States)

    Mahadevan, Sankaran; Han, Song

    1997-01-01

    The objective of this study is to develop a new methodology for estimating the reliability of engineering systems that encompass multiple disciplines. The methodology is formulated in the context of the NESSUS probabilistic structural analysis code developed under the leadership of NASA Lewis Research Center. The NESSUS code has been successfully applied to the reliability estimation of a variety of structural engineering systems. This study examines whether the features of NESSUS could be used to investigate the reliability of systems in other disciplines such as heat transfer, fluid mechanics, electrical circuits etc., without considerable programming effort specific to each discipline. In this study, the mechanical equivalence between system behavior models in different disciplines are investigated to achieve this objective. A new methodology is presented for the analysis of heat transfer, fluid flow, and electrical circuit problems using the structural analysis routines within NESSUS, by utilizing the equivalence between the computational quantities in different disciplines. This technique is integrated with the fast probability integration and system reliability techniques within the NESSUS code, to successfully compute the system reliability of multi-disciplinary systems. Traditional as well as progressive failure analysis methods for system reliability estimation are demonstrated, through a numerical example of a heat exchanger system involving failure modes in structural, heat transfer and fluid flow disciplines.

  15. DEPEND-HRA-A method for consideration of dependency in human reliability analysis

    International Nuclear Information System (INIS)

    Cepin, Marko

    2008-01-01

    A consideration of dependencies between human actions is an important issue within the human reliability analysis. A method was developed, which integrates the features of existing methods and the experience from a full scope plant simulator. The method is used on real plant-specific human reliability analysis as a part of the probabilistic safety assessment of a nuclear power plant. The method distinguishes dependency for pre-initiator events from dependency for initiator and post-initiator events. The method identifies dependencies based on scenarios, where consecutive human actions are modeled, and based on a list of minimal cut sets, which is obtained by running the minimal cut set analysis considering high values of human error probabilities in the evaluation. A large example study, which consisted of a large number of human failure events, demonstrated the applicability of the method. Comparative analyses that were performed show that both selection of dependency method and selection of dependency levels within the method largely impact the results of probabilistic safety assessment. If the core damage frequency is not impacted much, the listings of important basic events in terms of risk increase and risk decrease factors may change considerably. More efforts are needed on the subject, which will prepare the background for more detailed guidelines, which will remove the subjectivity from the evaluations as much as it is possible

  16. Pupil initiatives in urban nature trail development: PMB MOSS and ...

    African Journals Online (AJOL)

    A brief background to Greenbelt and urban nature trail development in Pietermaritzburg is provided. Negotiations and procedures initiated by standard 9 pupils in stimulating authorities and the public to recognise the need for urban trail development and metropolitan open space (MOSS) are outlined. long-term ...

  17. Reliability research based experience with systems and events at the Kozloduy NPP units 1-4

    Energy Technology Data Exchange (ETDEWEB)

    Khristova, R; Kaltchev, B; Dimitrov, B [Energoproekt, Sofia (Bulgaria); Nedyalkova, D; Sonev, A [Kombinat Atomna Energetika, Kozloduj (Bulgaria)

    1996-12-31

    An overview of equipment reliability based on operational data of selected safety systems at the Kozloduy NPP is presented. Conclusions are drawn on reliability of the service water system, feed water system, emergency power supply - category 2, emergency high pressure ejection system and spray system. For the units 1-4 all recorded accident protocols in the period 1974-1993 have been processed and the main initiators identified. A list with 39 most frequent initiators of accidents/incidents is compiled. The human-caused errors account for 27% of all events. The reliability characteristics and frequencies have been calculated for all initiating events. It is concluded that there have not been any accidents with consequences for fuel integrity or radioactive release. 14 refs.

  18. Reliability research based experience with systems and events at the Kozloduy NPP units 1-4

    International Nuclear Information System (INIS)

    Khristova, R.; Kaltchev, B.; Dimitrov, B.; Nedyalkova, D.; Sonev, A.

    1995-01-01

    An overview of equipment reliability based on operational data of selected safety systems at the Kozloduy NPP is presented. Conclusions are drawn on reliability of the service water system, feed water system, emergency power supply - category 2, emergency high pressure ejection system and spray system. For the units 1-4 all recorded accident protocols in the period 1974-1993 have been processed and the main initiators identified. A list with 39 most frequent initiators of accidents/incidents is compiled. The human-caused errors account for 27% of all events. The reliability characteristics and frequencies have been calculated for all initiating events. It is concluded that there have not been any accidents with consequences for fuel integrity or radioactive release. 14 refs

  19. Survey of methods used to asses human reliability in the human factors reliability benchmark exercise

    International Nuclear Information System (INIS)

    Poucet, A.

    1988-01-01

    The Joint Research Centre of the European Commission has organised a Human Factors Reliability Benchmark Exercise (HF-RBE) with the aim to assess the state-of-the-art in human reliability modelling and assessment. Fifteen teams from eleven countries, representing industry, utilities, licensing organisations and research institutes, participate in the HF-RBE, which is organised around two study cases: (1) analysis of routine functional test and maintenance procedures, with the aim to assess the probability of test-induced failures, the probability of failures to remain unrevealed, and the potential to initiate transients because of errors performed in the test; and (2) analysis of human actions during an operational transient, with the aim to assess the probability that the operators will correctly diagnose the malfunctions and take proper corrective action. The paper briefly reports how the HF-RBE was structured and gives an overview of the methods that have been used for predicting human reliability in both study cases. The experience in applying these methods is discussed and the results obtained are compared. (author)

  20. Development of reliability-based design and assessment standards for onshore gas transmission pipelines

    Energy Technology Data Exchange (ETDEWEB)

    Zhou, Joe; Rothwell, Brian [TransCanada PipeLines Ltd., Calgary, AB (Canada); Nessim, Maher; Zhou, Wenxing [C-FER Technologies, Edmonton, AB (Canada)

    2005-07-01

    Onshore pipelines have traditionally been designed with a deterministic stress based methodology. The changing operating environment has however imposed many challenges to the pipeline industry, including heightened public awareness of risk, more challenging natural hazards and increased economic competitiveness. To meet the societal expectation of pipeline safety and enhance the competitiveness of the pipeline industry, significant efforts have been spent for the development of reliability-based design and assessment (RBDA) methodology. This paper will briefly review the technology development in the RBDA area and the focus will be on the progresses in the past years in standard development within the American Society of Mechanical Engineers (ASME) and the Canadian Standard Association (CSA) organizations. (author)

  1. Reliability and protection against failure in computer systems

    International Nuclear Information System (INIS)

    Daniels, B.K.

    1979-01-01

    Computers are being increasingly integrated into the control and safety systems of large and potentially hazardous industrial processes. This development introduces problems which are particular to computer systems and opens the way to new techniques of solving conventional reliability and availability problems. References to the developing fields of software reliability, human factors and software design are given, and these subjects are related, where possible, to the quantified assessment of reliability. Original material is presented in the areas of reliability growth and computer hardware failure data. The report draws on the experience of the National Centre of Systems Reliability in assessing the capability and reliability of computer systems both within the nuclear industry, and from the work carried out in other industries by the Systems Reliability Service. (author)

  2. A new approach for interexaminer reliability data analysis on dental caries calibration

    Directory of Open Access Journals (Sweden)

    Andréa Videira Assaf

    2007-12-01

    Full Text Available Objectives: a to evaluate the interexaminer reliability in caries detection considering different diagnostic thresholds and b to indicate, by using Kappa statistics, the best way of measuring interexaminer agreement during the calibration process in dental caries surveys. Methods: Eleven dentists participated in the initial training, which was divided into theoretical discussions and practical activities, and calibration exercises, performed at baseline, 3 and 6 months after the initial training. For the examinations of 6-7-year-old schoolchildren, the World Health Organization (WHO recommendations were followed and different diagnostic thresholds were used: WHO (decayed/missing/filled teeth - DMFT index and WHO + IL (initial lesion diagnostic thresholds. The interexaminer reliability was calculated by Kappa statistics, according to WHO and WHO+IL thresholds considering: a the entire dentition; b upper/lower jaws; c sextants; d each tooth individually. Results: Interexaminer reliability was high for both diagnostic thresholds; nevertheless, it decreased in all calibration sections when considering teeth individually. Conclusion: The interexaminer reliability was possible during the period of 6 months, under both caries diagnosis thresholds. However, great disagreement was observed for posterior teeth, especially using the WHO+IL criteria. Analysis considering dental elements individually was the best way of detecting interexaminer disagreement during the calibration sections.

  3. CADRIGS--computer aided design reliability interactive graphics system

    International Nuclear Information System (INIS)

    Kwik, R.J.; Polizzi, L.M.; Sticco, S.; Gerrard, P.B.; Yeater, M.L.; Hockenbury, R.W.; Phillips, M.A.

    1982-01-01

    An integrated reliability analysis program combining graphic representation of fault trees, automated data base loadings and reference, and automated construction of reliability code input files was developed. The functional specifications for CADRIGS, the computer aided design reliability interactive graphics system, are presented. Previously developed fault tree segments used in auxiliary feedwater system safety analysis were constructed on CADRIGS and, when combined, yielded results identical to those resulting from manual input to the same reliability codes

  4. Reliability Based Ship Structural Design

    DEFF Research Database (Denmark)

    Dogliani, M.; Østergaard, C.; Parmentier, G.

    1996-01-01

    This paper deals with the development of different methods that allow the reliability-based design of ship structures to be transferred from the area of research to the systematic application in current design. It summarises the achievements of a three-year collaborative research project dealing...... with developments of models of load effects and of structural collapse adopted in reliability formulations which aim at calibrating partial safety factors for ship structural design. New probabilistic models of still-water load effects are developed both for tankers and for containerships. New results are presented...... structure of several tankers and containerships. The results of the reliability analysis were the basis for the definition of a target safety level which was used to asses the partial safety factors suitable for in a new design rules format to be adopted in modern ship structural design. Finally...

  5. The Trojan Lifetime Champions Health Survey: Development, Validity, and Reliability

    Science.gov (United States)

    Sorenson, Shawn C.; Romano, Russell; Scholefield, Robin M.; Schroeder, E. Todd; Azen, Stanley P.; Salem, George J.

    2015-01-01

    Context Self-report questionnaires are an important method of evaluating lifespan health, exercise, and health-related quality of life (HRQL) outcomes among elite, competitive athletes. Few instruments, however, have undergone formal characterization of their psychometric properties within this population. Objective To evaluate the validity and reliability of a novel health and exercise questionnaire, the Trojan Lifetime Champions (TLC) Health Survey. Design Descriptive laboratory study. Setting A large National Collegiate Athletic Association Division I university. Patients or Other Participants A total of 63 university alumni (age range, 24 to 84 years), including former varsity collegiate athletes and a control group of nonathletes. Intervention(s) Participants completed the TLC Health Survey twice at a mean interval of 23 days with randomization to the paper or electronic version of the instrument. Main Outcome Measure(s) Content validity, feasibility of administration, test-retest reliability, parallel-form reliability between paper and electronic forms, and estimates of systematic and typical error versus differences of clinical interest were assessed across a broad range of health, exercise, and HRQL measures. Results Correlation coefficients, including intraclass correlation coefficients (ICCs) for continuous variables and κ agreement statistics for ordinal variables, for test-retest reliability averaged 0.86, 0.90, 0.80, and 0.74 for HRQL, lifetime health, recent health, and exercise variables, respectively. Correlation coefficients, again ICCs and κ, for parallel-form reliability (ie, equivalence) between paper and electronic versions averaged 0.90, 0.85, 0.85, and 0.81 for HRQL, lifetime health, recent health, and exercise variables, respectively. Typical measurement error was less than the a priori thresholds of clinical interest, and we found minimal evidence of systematic test-retest error. We found strong evidence of content validity, convergent

  6. Reliability of electronic systems

    International Nuclear Information System (INIS)

    Roca, Jose L.

    2001-01-01

    Reliability techniques have been developed subsequently as a need of the diverse engineering disciplines, nevertheless they are not few those that think they have been work a lot on reliability before the same word was used in the current context. Military, space and nuclear industries were the first ones that have been involved in this topic, however not only in these environments it is that it has been carried out this small great revolution in benefit of the increase of the reliability figures of the products of those industries, but rather it has extended to the whole industry. The fact of the massive production, characteristic of the current industries, drove four decades ago, to the fall of the reliability of its products, on one hand, because the massively itself and, for other, to the recently discovered and even not stabilized industrial techniques. Industry should be changed according to those two new requirements, creating products of medium complexity and assuring an enough reliability appropriated to production costs and controls. Reliability began to be integral part of the manufactured product. Facing this philosophy, the book describes reliability techniques applied to electronics systems and provides a coherent and rigorous framework for these diverse activities providing a unifying scientific basis for the entire subject. It consists of eight chapters plus a lot of statistical tables and an extensive annotated bibliography. Chapters embrace the following topics: 1- Introduction to Reliability; 2- Basic Mathematical Concepts; 3- Catastrophic Failure Models; 4-Parametric Failure Models; 5- Systems Reliability; 6- Reliability in Design and Project; 7- Reliability Tests; 8- Software Reliability. This book is in Spanish language and has a potentially diverse audience as a text book from academic to industrial courses. (author)

  7. Initial operation of the Argonne superconducting heavy-ion linac

    Energy Technology Data Exchange (ETDEWEB)

    Shepard, K. W.

    1979-01-01

    Initial operation and recent development of the Argonne superconducting heavy-ion linac are discussed. The linac has been developed in order to demonstrate a cost-effective means of extending the performance of electrostatic tandem accelerators. The results of beam acceleration tests which began in June 1978 are described. At present 7 of a planned array of 22 resonators are operating on-line, and the linac system provides an effective accelerating potential of 7.5 MV. Although some technical problems remain, the level of performance and reliability is sufficient that appreciable beam time is becoming available to users.

  8. Methodology for reliability based condition assessment

    International Nuclear Information System (INIS)

    Mori, Y.; Ellingwood, B.

    1993-08-01

    Structures in nuclear power plants may be exposed to aggressive environmental effects that cause their strength to decrease over an extended period of service. A major concern in evaluating the continued service for such structures is to ensure that in their current condition they are able to withstand future extreme load events during the intended service life with a level of reliability sufficient for public safety. This report describes a methodology to facilitate quantitative assessments of current and future structural reliability and performance of structures in nuclear power plants. This methodology takes into account the nature of past and future loads, and randomness in strength and in degradation resulting from environmental factors. An adaptive Monte Carlo simulation procedure is used to evaluate time-dependent system reliability. The time-dependent reliability is sensitive to the time-varying load characteristics and to the choice of initial strength and strength degradation models but not to correlation in component strengths within a system. Inspection/maintenance strategies are identified that minimize the expected future costs of keeping the failure probability of a structure at or below an established target failure probability during its anticipated service period

  9. The inventory for déjà vu experiences assessment. Development, utility, reliability, and validity

    NARCIS (Netherlands)

    Sno, H. N.; Schalken, H. F.; de Jonghe, F.; Koeter, M. W.

    1994-01-01

    In this article the development, utility, reliability, and validity of the Inventory for Déjà vu Experiences Assessment (IDEA) are described. The IDEA is a 23-item self-administered questionnaire consisting of a general section of nine questions and qualitative section of 14 questions. The latter

  10. Development of advanced methods and related software for human reliability evaluation within probabilistic safety analyses

    International Nuclear Information System (INIS)

    Kosmowski, K.T.; Mertens, J.; Degen, G.; Reer, B.

    1994-06-01

    Human Reliability Analysis (HRA) is an important part of Probabilistic Safety Analysis (PSA). The first part of this report consists of an overview of types of human behaviour and human error including the effect of significant performance shaping factors on human reliability. Particularly with regard to safety assessments for nuclear power plants a lot of HRA methods have been developed. The most important of these methods are presented and discussed in the report, together with techniques for incorporating HRA into PSA and with models of operator cognitive behaviour. Based on existing HRA methods the concept of a software system is described. For the development of this system the utilization of modern programming tools is proposed; the essential goal is the effective application of HRA methods. A possible integration of computeraided HRA within PSA is discussed. The features of Expert System Technology and examples of applications (PSA, HRA) are presented in four appendices. (orig.) [de

  11. Developing a novel hierarchical approach for multiscale structural reliability predictions for ultra-high consequence applications

    Energy Technology Data Exchange (ETDEWEB)

    Emery, John M. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Coffin, Peter [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Robbins, Brian A. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Carroll, Jay [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Field, Richard V. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Jeremy Yoo, Yung Suk [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Kacher, Josh [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2017-09-01

    Microstructural variabilities are among the predominant sources of uncertainty in structural performance and reliability. We seek to develop efficient algorithms for multiscale calcu- lations for polycrystalline alloys such as aluminum alloy 6061-T6 in environments where ductile fracture is the dominant failure mode. Our approach employs concurrent multiscale methods, but does not focus on their development. They are a necessary but not sufficient ingredient to multiscale reliability predictions. We have focused on how to efficiently use concurrent models for forward propagation because practical applications cannot include fine-scale details throughout the problem domain due to exorbitant computational demand. Our approach begins with a low-fidelity prediction at the engineering scale that is sub- sequently refined with multiscale simulation. The results presented in this report focus on plasticity and damage at the meso-scale, efforts to expedite Monte Carlo simulation with mi- crostructural considerations, modeling aspects regarding geometric representation of grains and second-phase particles, and contrasting algorithms for scale coupling.

  12. Assessing Reliability of Cold Spray Sputter Targets in Photovoltaic Manufacturing

    Science.gov (United States)

    Hardikar, Kedar; Vlcek, Johannes; Bheemreddy, Venkata; Juliano, Daniel

    2017-10-01

    Cold spray has been used to manufacture more than 800 Cu-In-Ga (CIG) sputter targets for deposition of high-efficiency photovoltaic thin films. It is a preferred technique since it enables high deposit purity and transfer of non-equilibrium alloy states to the target material. In this work, an integrated approach to reliability assessment of such targets with deposit weight in excess of 50 lb. is undertaken, involving thermal-mechanical characterization of the material in as-deposited condition, characterization of the interface adhesion on cylindrical substrate in as-deposited condition, and developing means to assess target integrity under thermal-mechanical loads during the physical vapor deposition (PVD) sputtering process. Mechanical characterization of cold spray deposited CIG alloy is accomplished through the use of indentation testing and adaptation of Brazilian disk test. A custom lever test was developed to characterize adhesion along the cylindrical interface between the CIG deposit and cylindrical substrate, overcoming limitations of current standards. A cohesive zone model for crack initiation and propagation at the deposit interface is developed and validated using the lever test and later used to simulate the potential catastrophic target failure in the PVD process. It is shown that this approach enables reliability assessment of sputter targets and improves robustness.

  13. Paradise nearly Gained. Volume 1: Developing the Frontline Management Initiative.

    Science.gov (United States)

    Barratt-Pugh, Llandis; Soutar, Geoffrey N.

    The Frontline Management Initiative (FMI) provides a framework for competency-based development of frontline managers in Australian enterprises. The FMI's impact on businesses was examined in a national study that included the following activities: focus groups; a national survey of management development and targeted national survey of FMI users;…

  14. Development of a Tablet-based symbol digit modalities test for reliably assessing information processing speed in patients with stroke.

    Science.gov (United States)

    Tung, Li-Chen; Yu, Wan-Hui; Lin, Gong-Hong; Yu, Tzu-Ying; Wu, Chien-Te; Tsai, Chia-Yin; Chou, Willy; Chen, Mei-Hsiang; Hsieh, Ching-Lin

    2016-09-01

    To develop a Tablet-based Symbol Digit Modalities Test (T-SDMT) and to examine the test-retest reliability and concurrent validity of the T-SDMT in patients with stroke. The study had two phases. In the first phase, six experts, nine college students and five outpatients participated in the development and testing of the T-SDMT. In the second phase, 52 outpatients were evaluated twice (2 weeks apart) with the T-SDMT and SDMT to examine the test-retest reliability and concurrent validity of the T-SDMT. The T-SDMT was developed via expert input and college student/patient feedback. Regarding test-retest reliability, the practise effects of the T-SDMT and SDMT were both trivial (d=0.12) but significant (p≦0.015). The improvement in the T-SDMT (4.7%) was smaller than that in the SDMT (5.6%). The minimal detectable changes (MDC%) of the T-SDMT and SDMT were 6.7 (22.8%) and 10.3 (32.8%), respectively. The T-SDMT and SDMT were highly correlated with each other at the two time points (Pearson's r=0.90-0.91). The T-SDMT demonstrated good concurrent validity with the SDMT. Because the T-SDMT had a smaller practise effect and less random measurement error (superior test-retest reliability), it is recommended over the SDMT for assessing information processing speed in patients with stroke. Implications for Rehabilitation The Symbol Digit Modalities Test (SDMT), a common measure of information processing speed, showed a substantial practise effect and considerable random measurement error in patients with stroke. The Tablet-based SDMT (T-SDMT) has been developed to reduce the practise effect and random measurement error of the SDMT in patients with stroke. The T-SDMT had smaller practise effect and random measurement error than the SDMT, which can provide more reliable assessments of information processing speed.

  15. Examining the reliability of ADAS-Cog change scores.

    Science.gov (United States)

    Grochowalski, Joseph H; Liu, Ying; Siedlecki, Karen L

    2016-09-01

    The purpose of this study was to estimate and examine ways to improve the reliability of change scores on the Alzheimer's Disease Assessment Scale, Cognitive Subtest (ADAS-Cog). The sample, provided by the Alzheimer's Disease Neuroimaging Initiative, included individuals with Alzheimer's disease (AD) (n = 153) and individuals with mild cognitive impairment (MCI) (n = 352). All participants were administered the ADAS-Cog at baseline and 1 year, and change scores were calculated as the difference in scores over the 1-year period. Three types of change score reliabilities were estimated using multivariate generalizability. Two methods to increase change score reliability were evaluated: reweighting the subtests of the scale and adding more subtests. Reliability of ADAS-Cog change scores over 1 year was low for both the AD sample (ranging from .53 to .64) and the MCI sample (.39 to .61). Reweighting the change scores from the AD sample improved reliability (.68 to .76), but lengthening provided no useful improvement for either sample. The MCI change scores had low reliability, even with reweighting and adding additional subtests. The ADAS-Cog scores had low reliability for measuring change. Researchers using the ADAS-Cog should estimate and report reliability for their use of the change scores. The ADAS-Cog change scores are not recommended for assessment of meaningful clinical change.

  16. Identifying factors influencing reliability of professional systems

    NARCIS (Netherlands)

    Balasubramanian, A.; Kevrekidis, K.; Sonnemans, P.J.M.; Newby, M.J.

    2008-01-01

    Modern product development strategies call for a more proactive approach to fight intense global competition in terms of technological innovation, shorter time to market, quality and reliability and accommodative price. From a reliability engineering perspective, development managers would like to

  17. Failure database and tools for wind turbine availability and reliability analyses. The application of reliability data for selected wind turbines

    DEFF Research Database (Denmark)

    Kozine, Igor; Christensen, P.; Winther-Jensen, M.

    2000-01-01

    The objective of this project was to develop and establish a database for collecting reliability and reliability-related data, for assessing the reliability of wind turbine components and subsystems and wind turbines as a whole, as well as for assessingwind turbine availability while ranking the ...... similar safety systems. The database was established with Microsoft Access DatabaseManagement System, the software for reliability and availability assessments was created with Visual Basic....... the contributions at both the component and system levels. The project resulted in a software package combining a failure database with programs for predicting WTB availability and the reliability of all thecomponents and systems, especially the safety system. The report consists of a description of the theoretical......The objective of this project was to develop and establish a database for collecting reliability and reliability-related data, for assessing the reliability of wind turbine components and subsystems and wind turbines as a whole, as well as for assessingwind turbine availability while ranking...

  18. The Enzyme Function Initiative.

    Science.gov (United States)

    Gerlt, John A; Allen, Karen N; Almo, Steven C; Armstrong, Richard N; Babbitt, Patricia C; Cronan, John E; Dunaway-Mariano, Debra; Imker, Heidi J; Jacobson, Matthew P; Minor, Wladek; Poulter, C Dale; Raushel, Frank M; Sali, Andrej; Shoichet, Brian K; Sweedler, Jonathan V

    2011-11-22

    The Enzyme Function Initiative (EFI) was recently established to address the challenge of assigning reliable functions to enzymes discovered in bacterial genome projects; in this Current Topic, we review the structure and operations of the EFI. The EFI includes the Superfamily/Genome, Protein, Structure, Computation, and Data/Dissemination Cores that provide the infrastructure for reliably predicting the in vitro functions of unknown enzymes. The initial targets for functional assignment are selected from five functionally diverse superfamilies (amidohydrolase, enolase, glutathione transferase, haloalkanoic acid dehalogenase, and isoprenoid synthase), with five superfamily specific Bridging Projects experimentally testing the predicted in vitro enzymatic activities. The EFI also includes the Microbiology Core that evaluates the in vivo context of in vitro enzymatic functions and confirms the functional predictions of the EFI. The deliverables of the EFI to the scientific community include (1) development of a large-scale, multidisciplinary sequence/structure-based strategy for functional assignment of unknown enzymes discovered in genome projects (target selection, protein production, structure determination, computation, experimental enzymology, microbiology, and structure-based annotation), (2) dissemination of the strategy to the community via publications, collaborations, workshops, and symposia, (3) computational and bioinformatic tools for using the strategy, (4) provision of experimental protocols and/or reagents for enzyme production and characterization, and (5) dissemination of data via the EFI's Website, http://enzymefunction.org. The realization of multidisciplinary strategies for functional assignment will begin to define the full metabolic diversity that exists in nature and will impact basic biochemical and evolutionary understanding, as well as a wide range of applications of central importance to industrial, medicinal, and pharmaceutical efforts.

  19. Lean and leadership practices: development of an initial realist program theory.

    Science.gov (United States)

    Goodridge, Donna; Westhorp, Gill; Rotter, Thomas; Dobson, Roy; Bath, Brenna

    2015-09-07

    Lean as a management system has been increasingly adopted in health care settings in an effort to enhance quality, capacity and safety, while simultaneously containing or reducing costs. The Ministry of Health in the province of Saskatchewan, Canada has made a multi-million dollar investment in Lean initiatives to create "better health, better value, better care, and better teams", affording a unique opportunity to advance our understanding of the way in which Lean philosophy, principles and tools work in health care. In order to address the questions, "What changes in leadership practices are associated with the implementation of Lean?" and "When leadership practices change, how do the changed practices contribute to subsequent outcomes?", we used a qualitative, multi-stage approach to work towards developing an initial realist program theory. We describe the implications of realist assumptions for evaluation of this Lean initiative. Formal theories including Normalization Process Theory, Theories of Double Loop and Organization Leaning and the Theory of Cognitive Dissonance help understand this initial rough program theory. Data collection included: key informant consultation; a stakeholder workshop; documentary review; 26 audiotaped and transcribed interviews with health region personnel; and team discussions. A set of seven initial hypotheses regarding the manner in which Lean changes leadership practices were developed from our data. We hypothesized that Lean, as implemented in this particular setting, changes leadership practices in the following ways. Lean: a) aligns the aims and objectives of health regions; b) authorizes attention and resources to quality improvement and change management c) provides an integrated set of tools for particular tasks; d) changes leaders' attitudes or beliefs about appropriate leadership and management styles and behaviors; e) demands increased levels of expertise, accountability and commitment from leaders; f) measures and

  20. Integrated Reliability-Based Optimal Design of Structures

    DEFF Research Database (Denmark)

    Sørensen, John Dalsgaard; Thoft-Christensen, Palle

    1987-01-01

    In conventional optimal design of structural systems the weight or the initial cost of the structure is usually used as objective function. Further, the constraints require that the stresses and/or strains at some critical points have to be less than some given values. Finally, all variables......-based optimal design is discussed. Next, an optimal inspection and repair strategy for existing structural systems is presented. An optimization problem is formulated , where the objective is to minimize the expected total future cost of inspection and repair subject to the constraint that the reliability...... value. The reliability can be measured from an element and/or a systems point of view. A number of methods to solve reliability-based optimization problems has been suggested, see e.g. Frangopol [I]. Murotsu et al. (2], Thoft-Christensen & Sørensen (3] and Sørensen (4). For structures where...

  1. Initial Development Work for the Cloud-Aerosol Multi-Angle Lidar

    Data.gov (United States)

    National Aeronautics and Space Administration — Initiate development of a cost-effective off-nadir cloud-aerosol lidar instrument to enable data synergy with passive sensors (imagers, polarimeters) and models...

  2. Dynamic analysis and reliability assessment of structures with uncertain-but-bounded parameters under stochastic process excitations

    International Nuclear Information System (INIS)

    Do, Duy Minh; Gao, Wei; Song, Chongmin; Tangaramvong, Sawekchai

    2014-01-01

    This paper presents the non-deterministic dynamic analysis and reliability assessment of structures with uncertain-but-bounded parameters under stochastic process excitations. Random ground acceleration from earthquake motion is adopted to illustrate the stochastic process force. The exact change ranges of natural frequencies, random vibration displacement and stress responses of structures are investigated under the interval analysis framework. Formulations for structural reliability are developed considering the safe boundary and structural random vibration responses as interval parameters. An improved particle swarm optimization algorithm, namely randomised lower sequence initialized high-order nonlinear particle swarm optimization algorithm, is employed to capture the better bounds of structural dynamic characteristics, random vibration responses and reliability. Three numerical examples are used to demonstrate the presented method for interval random vibration analysis and reliability assessment of structures. The accuracy of the results obtained by the presented method is verified by the randomised Quasi-Monte Carlo simulation method (QMCSM) and direct Monte Carlo simulation method (MCSM). - Highlights: • Interval uncertainty is introduced into structural random vibration responses. • Interval dynamic reliability assessments of structures are implemented. • Boundaries of structural dynamic response and reliability are achieved

  3. Reliability issues : a Canadian perspective

    International Nuclear Information System (INIS)

    Konow, H.

    2004-01-01

    A Canadian perspective of power reliability issues was presented. Reliability depends on adequacy of supply and a framework for standards. The challenges facing the electric power industry include new demand, plant replacement and exports. It is expected that demand will by 670 TWh by 2020, with 205 TWh coming from new plants. Canada will require an investment of $150 billion to meet this demand and the need is comparable in the United States. As trade grows, the challenge becomes a continental issue and investment in the bi-national transmission grid will be essential. The 5 point plan of the Canadian Electricity Association is to: (1) establish an investment climate to ensure future electricity supply, (2) move government and industry towards smart and effective regulation, (3) work to ensure a sustainable future for the next generation, (4) foster innovation and accelerate skills development, and (5) build on the strengths of an integrated North American system to maximize opportunity for Canadians. The CEA's 7 measures that enhance North American reliability were listed with emphasis on its support for a self-governing international organization for developing and enforcing mandatory reliability standards. CEA also supports the creation of a binational Electric Reliability Organization (ERO) to identify and solve reliability issues in the context of a bi-national grid. tabs., figs

  4. Initiating Event Analysis of a Lithium Fluoride Thorium Reactor

    Science.gov (United States)

    Geraci, Nicholas Charles

    The primary purpose of this study is to perform an Initiating Event Analysis for a Lithium Fluoride Thorium Reactor (LFTR) as the first step of a Probabilistic Safety Assessment (PSA). The major objective of the research is to compile a list of key initiating events capable of resulting in failure of safety systems and release of radioactive material from the LFTR. Due to the complex interactions between engineering design, component reliability and human reliability, probabilistic safety assessments are most useful when the scope is limited to a single reactor plant. Thus, this thesis will study the LFTR design proposed by Flibe Energy. An October 2015 Electric Power Research Institute report on the Flibe Energy LFTR asked "what-if?" questions of subject matter experts and compiled a list of key hazards with the most significant consequences to the safety or integrity of the LFTR. The potential exists for unforeseen hazards to pose additional risk for the LFTR, but the scope of this thesis is limited to evaluation of those key hazards already identified by Flibe Energy. These key hazards are the starting point for the Initiating Event Analysis performed in this thesis. Engineering evaluation and technical study of the plant using a literature review and comparison to reference technology revealed four hazards with high potential to cause reactor core damage. To determine the initiating events resulting in realization of these four hazards, reference was made to previous PSAs and existing NRC and EPRI initiating event lists. Finally, fault tree and event tree analyses were conducted, completing the logical classification of initiating events. Results are qualitative as opposed to quantitative due to the early stages of system design descriptions and lack of operating experience or data for the LFTR. In summary, this thesis analyzes initiating events using previous research and inductive and deductive reasoning through traditional risk management techniques to

  5. The Outdoor MEDIA DOT: The development and inter-rater reliability of a tool designed to measure food and beverage outlets and outdoor advertising.

    Science.gov (United States)

    Poulos, Natalie S; Pasch, Keryn E

    2015-07-01

    Few studies of the food environment have collected primary data, and even fewer have reported reliability of the tool used. This study focused on the development of an innovative electronic data collection tool used to document outdoor food and beverage (FB) advertising and establishments near 43 middle and high schools in the Outdoor MEDIA Study. Tool development used GIS based mapping, an electronic data collection form on handheld devices, and an easily adaptable interface to efficiently collect primary data within the food environment. For the reliability study, two teams of data collectors documented all FB advertising and establishments within one half-mile of six middle schools. Inter-rater reliability was calculated overall and by advertisement or establishment category using percent agreement. A total of 824 advertisements (n=233), establishment advertisements (n=499), and establishments (n=92) were documented (range=8-229 per school). Overall inter-rater reliability of the developed tool ranged from 69-89% for advertisements and establishments. Results suggest that the developed tool is highly reliable and effective for documenting the outdoor FB environment. Copyright © 2015 Elsevier Ltd. All rights reserved.

  6. Reliability estimation for multiunit nuclear and fossil-fired industrial energy systems

    International Nuclear Information System (INIS)

    Sullivan, W.G.; Wilson, J.V.; Klepper, O.H.

    1977-01-01

    As petroleum-based fuels grow increasingly scarce and costly, nuclear energy may become an important alternative source of industrial energy. Initial applications would most likely include a mix of fossil-fired and nuclear sources of process energy. A means for determining the overall reliability of these mixed systems is a fundamental aspect of demonstrating their feasibility to potential industrial users. Reliability data from nuclear and fossil-fired plants are presented, and several methods of applying these data for calculating the reliability of reasonably complex industrial energy supply systems are given. Reliability estimates made under a number of simplifying assumptions indicate that multiple nuclear units or a combination of nuclear and fossil-fired plants could provide adequate reliability to meet industrial requirements for continuity of service

  7. Next Generation Safeguards Initiative: Human Capital Development

    International Nuclear Information System (INIS)

    Scholz, M.; Irola, G.; Glynn, K.

    2015-01-01

    Since 2008, the Human Capital Development (HCD) subprogramme of the U.S. National Nuclear Security Administration's (NNSA) Next Generation Safeguards Initiative (NGSI) has supported the recruitment, education, training, and retention of the next generation of international safeguards professionals to meet the needs of both the International Atomic Energy Agency (IAEA) and the United States. Specifically, HCD's efforts respond to data indicating that 82% of safeguards experts at U.S. Laboratories will have left the workforce within 15 years. This paper provides an update on the status of the subprogramme since its last presentation at the IAEA Safeguards Symposium in 2010. It highlights strengthened, integrated efforts in the areas of graduate and post-doctoral fellowships, young and midcareer professional support, short safeguards courses, and university engagement. It also discusses lessons learned from the U.S. experience in safeguards education and training as well as the importance of long-range strategies to develop a cohesive, effective, and efficient human capital development approach. (author)

  8. Reliability modeling of Clinch River breeder reactor electrical shutdown systems

    International Nuclear Information System (INIS)

    Schatz, R.A.; Duetsch, K.L.

    1974-01-01

    The initial simulation of the probabilistic properties of the Clinch River Breeder Reactor Plant (CRBRP) electrical shutdown systems is described. A model of the reliability (and availability) of the systems is presented utilizing Success State and continuous-time, discrete state Markov modeling techniques as significant elements of an overall reliability assessment process capable of demonstrating the achievement of program goals. This model is examined for its sensitivity to safe/unsafe failure rates, sybsystem redundant configurations, test and repair intervals, monitoring by reactor operators; and the control exercised over system reliability by design modifications and the selection of system operating characteristics. (U.S.)

  9. The REPAS approach to the evaluation of passive safety systems reliability

    International Nuclear Information System (INIS)

    Bianchi, F.; Burgazzi, L.; D'Auria, F.; Ricotti, M.E.

    2002-01-01

    Scope of this research, carried out by ENEA in collaboration with University of Pisa and Polytechnic of Milano since 1999, is the identification of a methodology allowing the evaluation of the reliability of passive systems as a whole, in a more physical and phenomenal way. The paper describe the study, named REPAS (Reliability Evaluation of Passive Safety systems), carried out by the partners and finalised to the development and validation of such a procedure. The strategy of engagement moves from the consideration that a passive system should be theoretically more reliable than an active one. In fact it does not need any external input or energy to operate and it relies only upon natural physical laws (e.g. gravity, natural circulation, internally stored energy, etc.) and/or 'intelligent' use of the energy inherently available in the system (e.g. chemical reaction, decay heat, etc.). Nevertheless the passive system may fail its mission not only as a consequence of classical mechanical failure of components, but also for deviation from the expected behaviour, due to physical phenomena mainly related to thermal-hydraulics or due to different boundary and initial conditions. The main sources of physical failure are identified and a probability of occurrence is assigned. The reliability analysis is performed on a passive system which operates in two-phase, natural circulation. The selected system is a loop including a heat source and a heat sink where the condensation occurs. The system behaviour under different configurations has been simulated via best-estimate code (Relap5 mod3.2). The results are shown and can be treated in such a way to give qualitative and quantitative information on the system reliability. Main routes of development of the methodology are also depicted. The analysis of the results shows that the procedure is suitable to evaluate the performance of a passive system on a probabilistic / deterministic basis. Important information can also be

  10. Quality and reliability management and its applications

    CERN Document Server

    2016-01-01

    Integrating development processes, policies, and reliability predictions from the beginning of the product development lifecycle to ensure high levels of product performance and safety, this book helps companies overcome the challenges posed by increasingly complex systems in today’s competitive marketplace.   Examining both research on and practical aspects of product quality and reliability management with an emphasis on applications, the book features contributions written by active researchers and/or experienced practitioners in the field, so as to effectively bridge the gap between theory and practice and address new research challenges in reliability and quality management in practice.    Postgraduates, researchers and practitioners in the areas of reliability engineering and management, amongst others, will find the book to offer a state-of-the-art survey of quality and reliability management and practices.

  11. Systems reliability/structural reliability

    International Nuclear Information System (INIS)

    Green, A.E.

    1980-01-01

    The question of reliability technology using quantified techniques is considered for systems and structures. Systems reliability analysis has progressed to a viable and proven methodology whereas this has yet to be fully achieved for large scale structures. Structural loading variants over the half-time of the plant are considered to be more difficult to analyse than for systems, even though a relatively crude model may be a necessary starting point. Various reliability characteristics and environmental conditions are considered which enter this problem. The rare event situation is briefly mentioned together with aspects of proof testing and normal and upset loading conditions. (orig.)

  12. Mechanical reliability analysis of tubes intended for hydrocarbons

    Energy Technology Data Exchange (ETDEWEB)

    Nahal, Mourad; Khelif, Rabia [Badji Mokhtar University, Annaba (Algeria)

    2013-02-15

    Reliability analysis constitutes an essential phase in any study concerning reliability. Many industrialists evaluate and improve the reliability of their products during the development cycle - from design to startup (design, manufacture, and exploitation) - to develop their knowledge on cost/reliability ratio and to control sources of failure. In this study, we obtain results for hardness, tensile, and hydrostatic tests carried out on steel tubes for transporting hydrocarbons followed by statistical analysis. Results obtained allow us to conduct a reliability study based on resistance request. Thus, index of reliability is calculated and the importance of the variables related to the tube is presented. Reliability-based assessment of residual stress effects is applied to underground pipelines under a roadway, with and without active corrosion. Residual stress has been found to greatly increase probability of failure, especially in the early stages of pipe lifetime.

  13. The Initial Development of Object Knowledge by a Learning Robot.

    Science.gov (United States)

    Modayil, Joseph; Kuipers, Benjamin

    2008-11-30

    We describe how a robot can develop knowledge of the objects in its environment directly from unsupervised sensorimotor experience. The object knowledge consists of multiple integrated representations: trackers that form spatio-temporal clusters of sensory experience, percepts that represent properties for the tracked objects, classes that support efficient generalization from past experience, and actions that reliably change object percepts. We evaluate how well this intrinsically acquired object knowledge can be used to solve externally specified tasks including object recognition and achieving goals that require both planning and continuous control.

  14. Reliability and Availability of Cloud Computing

    CERN Document Server

    Bauer, Eric

    2012-01-01

    A holistic approach to service reliability and availability of cloud computing Reliability and Availability of Cloud Computing provides IS/IT system and solution architects, developers, and engineers with the knowledge needed to assess the impact of virtualization and cloud computing on service reliability and availability. It reveals how to select the most appropriate design for reliability diligence to assure that user expectations are met. Organized in three parts (basics, risk analysis, and recommendations), this resource is accessible to readers of diverse backgrounds and experience le

  15. 78 FR 71635 - 60-Day Notice of Proposed Information Collection: Appalachia Economic Development Initiative and...

    Science.gov (United States)

    2013-11-29

    ... Information Collection: Appalachia Economic Development Initiative and Semi-Annual Reporting AGENCY: Office of... of Rural Housing & Economic Development, Department of Housing and Urban Development, 451 7th Street... application for the Appalachia Economic Development Initiative grant process. Information is required to rate...

  16. Development on methods for evaluating structure reliability of piping components

    International Nuclear Information System (INIS)

    Schimpfke, T.; Grebner, H.; Peschke, J.; Sievers, J.

    2003-01-01

    In the frame of the German reactor safety research program of the Federal Ministry of Economics and Labour, GRS has started to develop an analysis code named PROST (PRObabilistic STructure analysis) for estimating the leak and break probabilities of piping systems in nuclear power plants. The development is based on the experience achieved with applications of the public available US code PRAISE 3.10 (Piping Reliability Analysis Including Seismic Events), which was supplemented by additional features regarding the statistical evaluation and the crack orientation. PROST is designed to be more flexible to changes and supplementations. Up to now it can be used for calculating fatigue problems. The paper mentions the main capabilities and theoretical background of the present PROST development and presents a parametric study on the influence by changing the method of stress intensity factor and limit load calculation and the statistical evaluation options on the leak probability of an exemplary pipe with postulated axial crack distribution. Furthermore the resulting leak probability of an exemplary pipe with postulated circumferential crack distribution is compared with the results of the modified PRAISE computer program. The intention of this investigation is to show trends. Therefore the resulting absolute values for probabilities should not be considered as realistic evaluations. (author)

  17. Piping reliability model development, validation and its applications to light water reactor piping

    International Nuclear Information System (INIS)

    Woo, H.H.

    1983-01-01

    A brief description is provided of a three-year effort undertaken by the Lawrence Livermore National Laboratory for the piping reliability project. The ultimate goal of this project is to provide guidance for nuclear piping design so that high-reliability piping systems can be built. Based on the results studied so far, it is concluded that the reliability approach can undoubtedly help in understanding not only how to assess and improve the safety of the piping systems but also how to design more reliable piping systems

  18. Can non-destructive inspection be reliable

    International Nuclear Information System (INIS)

    Silk, M.G.; Stoneham, A.M.; Temple, J.A.G.

    1988-01-01

    The paper on inspection is based on the book ''The reliability of non-destructive inspection: assessing the assessment of structures under stress'' by the present authors (published by Adam Hilger 1987). Emphasis is placed on the reliability of inspection and whether cracks in welds or flaws in components can be detected. The need for non-destructive testing and the historical attitudes to non-destructive testing are outlined, along with the case of failure. Factors influencing reliable inspection are discussed, and defect detection trials involving round robin tests are described. The development of reliable inspection techniques and the costs of reliability and unreliability are also examined. (U.K.)

  19. Reliability analysis for wind turbines with incomplete failure data collected from after the date of initial installation

    International Nuclear Information System (INIS)

    Guo Haitao; Watson, Simon; Tavner, Peter; Xiang Jiangping

    2009-01-01

    Reliability has an impact on wind energy project costs and benefits. Both life test data and field failure data can be used for reliability analysis. In wind energy industry, wind farm operators have greater interest in recording wind turbine operating data. However, field failure data may be tainted or incomplete, and therefore it needs a more general mathematical model and algorithms to solve the model. The aim of this paper is to provide a solution to this problem. A three-parameter Weibull failure rate function is discussed for wind turbines and the parameters are estimated by maximum likelihood and least squares. Two populations of German and Danish wind turbines are analyzed. The traditional Weibull failure rate function is also employed for comparison. Analysis shows that the three-parameter Weibull function can obtain more accuracy on reliability growth of wind turbines. This work will be helpful in the understanding of the reliability growth of wind energy systems as wind energy technologies evolving. The proposed three-parameter Weibull function is also applicable to the life test of the components that have been used for a period of time, not only in wind energy but also in other industries

  20. Reliability-Based Decision Fusion in Multimodal Biometric Verification Systems

    Directory of Open Access Journals (Sweden)

    Kryszczuk Krzysztof

    2007-01-01

    Full Text Available We present a methodology of reliability estimation in the multimodal biometric verification scenario. Reliability estimation has shown to be an efficient and accurate way of predicting and correcting erroneous classification decisions in both unimodal (speech, face, online signature and multimodal (speech and face systems. While the initial research results indicate the high potential of the proposed methodology, the performance of the reliability estimation in a multimodal setting has not been sufficiently studied or evaluated. In this paper, we demonstrate the advantages of using the unimodal reliability information in order to perform an efficient biometric fusion of two modalities. We further show the presented method to be superior to state-of-the-art multimodal decision-level fusion schemes. The experimental evaluation presented in this paper is based on the popular benchmarking bimodal BANCA database.

  1. Development and initial validation of a computer-administered health literacy assessment in Spanish and English: FLIGHT/VIDAS.

    Science.gov (United States)

    Ownby, Raymond L; Acevedo, Amarilis; Waldrop-Valverde, Drenna; Jacobs, Robin J; Caballero, Joshua; Davenport, Rosemary; Homs, Ana-Maria; Czaja, Sara J; Loewenstein, David

    2013-01-01

    Current measures of health literacy have been criticized on a number of grounds, including use of a limited range of content, development on small and atypical patient groups, and poor psychometric characteristics. In this paper, we report the development and preliminary validation of a new computer-administered and -scored health literacy measure addressing these limitations. Items in the measure reflect a wide range of content related to health promotion and maintenance as well as care for diseases. The development process has focused on creating a measure that will be useful in both Spanish and English, while not requiring substantial time for clinician training and individual administration and scoring. The items incorporate several formats, including questions based on brief videos, which allow for the assessment of listening comprehension and the skills related to obtaining information on the Internet. In this paper, we report the interim analyses detailing the initial development and pilot testing of the items (phase 1 of the project) in groups of Spanish and English speakers. We then describe phase 2, which included a second round of testing of the items, in new groups of Spanish and English speakers, and evaluation of the new measure's reliability and validity in relation to other measures. Data are presented that show that four scales (general health literacy, numeracy, conceptual knowledge, and listening comprehension), developed through a process of item and factor analyses, have significant relations to existing measures of health literacy.

  2. Structural reliability assessment capability in NESSUS

    Science.gov (United States)

    Millwater, H.; Wu, Y.-T.

    1992-07-01

    The principal capabilities of NESSUS (Numerical Evaluation of Stochastic Structures Under Stress), an advanced computer code developed for probabilistic structural response analysis, are reviewed, and its structural reliability assessed. The code combines flexible structural modeling tools with advanced probabilistic algorithms in order to compute probabilistic structural response and resistance, component reliability and risk, and system reliability and risk. An illustrative numerical example is presented.

  3. Development of a Rapid Cartilage Damage Quantification Method for the Lateral Tibiofemoral Compartment Using Magnetic Resonance Images: Data from the Osteoarthritis Initiative

    Directory of Open Access Journals (Sweden)

    Ming Zhang

    2015-01-01

    Full Text Available The purpose of this study was to expand and validate the cartilage damage index (CDI to detect cartilage damage in the lateral tibiofemoral compartment. We used an iterative 3-step process to develop and validate the lateral CDI: development (100 knees, testing (80 knees, and validation (100 knees. The validation set included 100 knees from the Osteoarthritis Initiative that was enriched to include all grades of lateral joint space narrowing (JSN, 0–3. Measurement of the CDI was rapid at 7.4 (s.d. 0.73 minutes per knee pair (baseline and follow-up of one knee. The intratester reliability is good (intraclass correlation coefficient (3, 1 model = 0.86 to 0.98. At baseline, knees with greater KL grade and lateral JSN had a lower mean CDI (i.e., greater cartilage damage. Baseline lateral CDI is associated with both lateral JSW (r=0.81 to 0.85, p<0.01 and HKA (r=-0.30 to −0.33, p<0.05. The SRM is good (lateral femur SRM = −0.76; lateral tibia SRM = −0.73; lateral tibiofemoral total SRM = −0.87. The lateral tibiofemoral CDI quantification allows for rapid evaluation and is reliable and responsive, with good construct validity. It may be an efficient method to measure lateral tibiofemoral articular cartilage in large clinical and epidemiologic studies.

  4. Aerospace reliability applied to biomedicine.

    Science.gov (United States)

    Lalli, V. R.; Vargo, D. J.

    1972-01-01

    An analysis is presented that indicates that the reliability and quality assurance methodology selected by NASA to minimize failures in aerospace equipment can be applied directly to biomedical devices to improve hospital equipment reliability. The Space Electric Rocket Test project is used as an example of NASA application of reliability and quality assurance (R&QA) methods. By analogy a comparison is made to show how these same methods can be used in the development of transducers, instrumentation, and complex systems for use in medicine.

  5. Reliability engineering for nuclear and other high technology systems

    International Nuclear Information System (INIS)

    Lakner, A.A.; Anderson, R.T.

    1985-01-01

    This book is written for the reliability instructor, program manager, system engineer, design engineer, reliability engineer, nuclear regulator, probability risk assessment (PRA) analyst, general manager and others who are involved in system hardware acquisition, design and operation and are concerned with plant safety and operational cost-effectiveness. It provides criteria, guidelines and comprehensive engineering data affecting reliability; it covers the key aspects of system reliability as it relates to conceptual planning, cost tradeoff decisions, specification, contractor selection, design, test and plant acceptance and operation. It treats reliability as an integrated methodology, explicitly describing life cycle management techniques as well as the basic elements of a total hardware development program, including: reliability parameters and design improvement attributes, reliability testing, reliability engineering and control. It describes how these elements can be defined during procurement, and implemented during design and development to yield reliable equipment. (author)

  6. Organic Marketing Initiatives and Rural Development

    OpenAIRE

    Schmid, Otto; Sanders, Jürn; Midmore, Peter

    2004-01-01

    Over recent decades, organic farmers have come together to form collective marketing initiatives. To begin with, such schemes were often essential as the only means of finding markets for organic products, but farmers today participate in them to pool ideas, capital and skills, and to collectively increase added value of products and market power in the supply chain. However, Organic Marketing Initiatives (OMIs) are not only initiated and managed by farmers but also by consumers, processors o...

  7. 18 CFR 40.2 - Mandatory Reliability Standards.

    Science.gov (United States)

    2010-04-01

    ...-POWER SYSTEM § 40.2 Mandatory Reliability Standards. (a) Each applicable user, owner or operator of the Bulk-Power System must comply with Commission-approved Reliability Standards developed by the Electric... 18 Conservation of Power and Water Resources 1 2010-04-01 2010-04-01 false Mandatory Reliability...

  8. Reliability and feasibility of gait initiation centre-of-pressure excursions using a Wii® Balance Board in older adults at risk of falling.

    Science.gov (United States)

    Lee, James; Webb, Graham; Shortland, Adam P; Edwards, Rebecca; Wilce, Charlotte; Jones, Gareth D

    2018-04-17

    Impairments in dynamic balance have a detrimental effect in older adults at risk of falls (OARF). Gait initiation (GI) is a challenging transitional movement. Centre of pressure (COP) excursions using force plates have been used to measure GI performance. The Nintendo Wii Balance Board (WBB) offers an alternative to a standard force plate for the measurement of CoP excursion. To determine the reliability of COP excursions using the WBB, and its feasibility within a 4-week strength and balance intervention (SBI) treating OARF. Ten OARF subjects attending SBI and ten young healthy adults, each performed three GI trials after 10 s of quiet stance from a standardised foot position (shoulder width) before walking forward 3 m to pick up an object. Averaged COP mediolateral (ML) and anteroposterior (AP) excursions (distance) and path-length time (GI-onset to first toe-off) were analysed. WBB ML (0.866) and AP COP excursion (0.895) reliability (ICC 3,1 ) was excellent, and COP path-length reliability was fair (0.517). Compared to OARF, healthy subjects presented with larger COP excursion in both directions and shorter COP path length. OARF subjects meaningfully improved their timed-up-and-go and ML COP excursion between weeks 1-4, while AP COP excursions, path length, and confidence-in-balance remained stable. COP path length and excursion directions probably measure different GI postural control attributes. Limitations in WBB accuracy and precision in transition tasks needs to be established before it can be used clinically to measure postural aspects of GI viably. The WBB could provide valuable clinical evaluation of balance function in OARF.

  9. Reliability

    OpenAIRE

    Condon, David; Revelle, William

    2017-01-01

    Separating the signal in a test from the irrelevant noise is a challenge for all measurement. Low test reliability limits test validity, attenuates important relationships, and can lead to regression artifacts. Multiple approaches to the assessment and improvement of reliability are discussed. The advantages and disadvantages of several different approaches to reliability are considered. Practical advice on how to assess reliability using open source software is provided.

  10. Development, reliability, and validity testing of Toddler NutriSTEP: a nutrition risk screening questionnaire for children 18-35 months of age.

    Science.gov (United States)

    Randall Simpson, Janis; Gumbley, Jillian; Whyte, Kylie; Lac, Jane; Morra, Crystal; Rysdale, Lee; Turfryer, Mary; McGibbon, Kim; Beyers, Joanne; Keller, Heather

    2015-09-01

    Nutrition is vital for optimal growth and development of young children. Nutrition risk screening can facilitate early intervention when followed by nutritional assessment and treatment. NutriSTEP (Nutrition Screening Tool for Every Preschooler) is a valid and reliable nutrition risk screening questionnaire for preschoolers (aged 3-5 years). A need was identified for a similar questionnaire for toddlers (aged 18-35 months). The purpose was to develop a reliable and valid Toddler NutriSTEP. Toddler NutriSTEP was developed in 4 phases. Content and face validity were determined with a literature review, parent focus groups (n = 6; 48 participants), and experts (n = 13) (phase A). A draft questionnaire was refined with key intercept interviews of 107 parents/caregivers (phase B). Test-retest reliability (phase C), based on intra-class correlations (ICC), Kappa (κ) statistics, and Wilcoxon tests was assessed with 133 parents/caregivers. Criterion validity (phase D) was assessed using Receiver Operating Characteristic (ROC) curves by comparing scores on the Toddler NutriSTEP to a comprehensive nutritional assessment of 200 toddlers with a registered dietitian (RD). The Toddler NutriSTEP was reliable between 2 administrations (ICC = 0.951, F = 20.53, p Toddler NutriSTEP were correlated (r = 0.67, p Toddler NutriSTEP questionnaire is both reliable and valid for screening for nutritional risk in toddlers.

  11. Reliability analysis of grid connected small wind turbine power electronics

    International Nuclear Information System (INIS)

    Arifujjaman, Md.; Iqbal, M.T.; Quaicoe, J.E.

    2009-01-01

    Grid connection of small permanent magnet generator (PMG) based wind turbines requires a power conditioning system comprising a bridge rectifier, a dc-dc converter and a grid-tie inverter. This work presents a reliability analysis and an identification of the least reliable component of the power conditioning system of such grid connection arrangements. Reliability of the configuration is analyzed for the worst case scenario of maximum conversion losses at a particular wind speed. The analysis reveals that the reliability of the power conditioning system of such PMG based wind turbines is fairly low and it reduces to 84% of initial value within one year. The investigation is further enhanced by identifying the least reliable component within the power conditioning system and found that the inverter has the dominant effect on the system reliability, while the dc-dc converter has the least significant effect. The reliability analysis demonstrates that a permanent magnet generator based wind energy conversion system is not the best option from the point of view of power conditioning system reliability. The analysis also reveals that new research is required to determine a robust power electronics configuration for small wind turbine conversion systems.

  12. Transnational Higher Education and Sustainable Development: Current Initiatives and Future Prospects

    Science.gov (United States)

    Koehn, Peter H.

    2012-01-01

    Tertiary educational institutions increasingly are relied upon for sustainable development initiatives. This policy research note analyzes newly available data regarding seven key dimensions of 295 transnational sustainable development projects involving US universities. Comparative regional analysis of the projects profiled in the APLU/AAU…

  13. Motor Importance of motor assessment in school children: analysis of the reliability of the motor development scale

    Directory of Open Access Journals (Sweden)

    Kassandra Nunes Amaro

    2010-09-01

    Full Text Available The objective of this study was to investigate the motor performance of school chil-dren aged 6 to 10 years without learning difficulties (n=101, and to analyze the reliability of the Motor Development Scale (MDS (Rosa Neto, 2002. Descriptive statistics with calculation of the mean, standard deviation, and range was used for data analysis. The internal consistency of the MDS was assessed using Cronbach’s alpha coefficient, and the correlation between variables was determined by Pearson’s linear correlation, with p<0.05. The results showed (1 that motor development was within normal limits in 96% of the children, and (2 a high correlation betwe-en chronological age and general motor age, indicating good internal consistency. These data demonstrate the logic and structured design of the MDS, confirming its reliability.

  14. The Privacy Attitude Questionnaire (PAQ): Initial Development and Validation

    OpenAIRE

    Chignell, Mark H.; Quan-Haase, Anabel; Gwizdka, Jacek

    2003-01-01

    Privacy has been identified as a key issue in a variety of domains, including electronic commerce and public policy. While there are many discussions of privacy issues from a legal and policy perspective, there is little information on the structure of privacy as a psychometric construct. Our goal is to develop a method for measuring attitudes towards privacy that can guide the design and personalization of services. This paper reports on the development of an initial version of the PAQ. Four...

  15. 77 FR 5044 - Announcement of Funding Awards for the Brownfields Economic Development Initiative (BEDI) Program...

    Science.gov (United States)

    2012-02-01

    ... Awards for the Brownfields Economic Development Initiative (BEDI) Program for Fiscal Year 2010 AGENCY...) for the Brownfield Economic Development Initiative (BEDI) program. This announcement contains the... CONTACT: David Kaminsky, Office of Economic Development Grants Management Division, Office of Community...

  16. 77 FR 5043 - Announcement of Funding Awards for the Brownfields Economic Development Initiative (BEDI) Program...

    Science.gov (United States)

    2012-02-01

    ... Awards for the Brownfields Economic Development Initiative (BEDI) Program for Fiscal Year 2009 AGENCY...) for the Brownfield Economic Development Initiative (BEDI) program. This announcement contains the... CONTACT: David Kaminsky, Office of Economic Development Grants Management Division, Office of Community...

  17. Reliability Standards of Complex Engineering Systems

    Science.gov (United States)

    Galperin, E. M.; Zayko, V. A.; Gorshkalev, P. A.

    2017-11-01

    Production and manufacture play an important role in today’s modern society. Industrial production is nowadays characterized by increased and complex communications between its parts. The problem of preventing accidents in a large industrial enterprise becomes especially relevant. In these circumstances, the reliability of enterprise functioning is of particular importance. Potential damage caused by an accident at such enterprise may lead to substantial material losses and, in some cases, can even cause a loss of human lives. That is why industrial enterprise functioning reliability is immensely important. In terms of their reliability, industrial facilities (objects) are divided into simple and complex. Simple objects are characterized by only two conditions: operable and non-operable. A complex object exists in more than two conditions. The main characteristic here is the stability of its operation. This paper develops the reliability indicator combining the set theory methodology and a state space method. Both are widely used to analyze dynamically developing probability processes. The research also introduces a set of reliability indicators for complex technical systems.

  18. Reliability tasks from prediction to field use

    International Nuclear Information System (INIS)

    Guyot, Christian.

    1975-01-01

    This tutorial paper is part of a series intended to sensitive on reliability prolems. Reliability probabilistic concept, is an important parameter of availability. Reliability prediction is an estimation process for evaluating design progress. It is only by the application of a reliability program that reliability objectives can be attained through the different stages of work: conception, fabrication, field use. The user is mainly interested in operational reliability. Indication are given on the support and the treatment of data in the case of electronic equipment at C.E.A. Reliability engineering requires a special state of mind which must be formed and developed in a company in the same way as it may be done for example for safety [fr

  19. EFL Teachers' Self-Initiated Professional Development: Perceptions and Practices

    Science.gov (United States)

    Simegn, Birhanu

    2014-01-01

    This study assessed perceptions and practices of secondary schools (Grade 9-12) EFL teachers' self-initiated professional development. A questionnaire of likert scale items and open-ended questions was used to gather data from thirty-two teachers. The teachers were asked to fill out the questionnaire at Bahir Dar University during their…

  20. Endoscopy nurse-administered propofol sedation performance. Development of an assessment tool and a reliability testing model

    DEFF Research Database (Denmark)

    Jensen, Jeppe Thue; Konge, Lars; Møller, Ann

    2014-01-01

    of training and for future certification. The aim of this study was to develop an assessment tool for measuring competency in propofol sedation and to explore the reliability and validity of the tool. MATERIAL AND METHODS: The nurse-administered propofol assessment tool (NAPSAT) was developed in a Delphi...... and good construct validity. This makes NAPSAT fit for formative assessment and proficiency feedback; however, high stakes and summative assessment cannot be advised....

  1. Software Development Initiatives to Identify and Mitigate Security Threats - Two Systematic Mapping Studies

    Directory of Open Access Journals (Sweden)

    Paulina Silva

    2016-12-01

    Full Text Available Software Security and development experts have addressed the problem of building secure software systems. There are several processes and initiatives to achieve secure software systems. However, most of these lack empirical evidence of its application and impact in building secure software systems. Two systematic mapping studies (SM have been conducted to cover the existent initiatives for identification and mitigation of security threats. The SMs created were executed in two steps, first in 2015 July, and complemented through a backward snowballing in 2016 July. Integrated results of these two SM studies show a total of 30 relevant sources were identified; 17 different initiatives covering threats identification and 14 covering the mitigation of threats were found. All the initiatives were associated to at least one activity of the Software Development Lifecycle (SDLC; while 6 showed signs of being applied in industrial settings, only 3 initiatives presented experimental evidence of its results through controlled experiments, some of the other selected studies presented case studies or proposals.

  2. The development of the Czech Republic electric industry - Reliable, safe and responsible source mix

    Energy Technology Data Exchange (ETDEWEB)

    Vrba, Miroslav; Jez, Jiri; Ptacek, Jiri

    2010-09-15

    The paper focuses on the development of the Czech Republic electric industry in close perspective and the prediction of its expected future in period up to 2030. The goal of the paper is to specify methods and procedures applied within periodic assessment of Czech electric power sector balance outlook for the State authorities. A necessity to respect economic recession and politicization of the issue of power sector development has invoked that these items are added to commonly used procedures. A key criterion is the reliable and safe electricity supply by adequate source mix for acceptable prices and environmental aspects.

  3. Human factors reliability Benchmark exercise

    International Nuclear Information System (INIS)

    Poucet, A.

    1989-06-01

    The Joint Research Centre of the European Commission has organized a Human Factors Reliability Benchmark Exercise (HF-RBE) with the aim of assessing the state of the art in human reliability modelling and assessment. Fifteen teams from eleven countries, representing industry, utilities, licensing organisations and research institutes, participated in the HF-RBE. The HF-RBE was organized around two study cases: (1) analysis of routine functional Test and Maintenance (T and M) procedures: with the aim of assessing the probability of test induced failures, the probability of failures to remain unrevealed and the potential to initiate transients because of errors performed in the test; (2) analysis of human actions during an operational transient: with the aim of assessing the probability that the operators will correctly diagnose the malfunctions and take proper corrective action. This report contains the final summary reports produced by the participants in the exercise

  4. Professional Development: Designing Initiatives to Meet the Needs of Online Faculty

    Science.gov (United States)

    Elliott, Marquita; Rhoades, Nicole; Jackson, Christina M.; Mandernach, B. Jean

    2015-01-01

    The increasing prevalence of online courses mandates an examination of the similarities--and differences--in the faculty training and development needs of those teaching online. With institutions facing increasingly limited resources, there is a need to prioritize faculty development initiatives that will encourage faculty participation. An…

  5. Advances in methods and applications of reliability and safety analysis

    International Nuclear Information System (INIS)

    Fieandt, J.; Hossi, H.; Laakso, K.; Lyytikaeinen, A.; Niemelae, I.; Pulkkinen, U.; Pulli, T.

    1986-01-01

    The know-how of the reliability and safety design and analysis techniques of Vtt has been established over several years in analyzing the reliability in the Finnish nuclear power plants Loviisa and Olkiluoto. This experience has been later on applied and developed to be used in the process industry, conventional power industry, automation and electronics. VTT develops and transfers methods and tools for reliability and safety analysis to the private and public sectors. The technology transfer takes place in joint development projects with potential users. Several computer-aided methods, such as RELVEC for reliability modelling and analysis, have been developed. The tool developed are today used by major Finnish companies in the fields of automation, nuclear power, shipbuilding and electronics. Development of computer-aided and other methods needed in analysis of operating experience, reliability or safety is further going on in a number of research and development projects

  6. Progress in Methodologies for the Assessment of Passive Safety System Reliability in Advanced Reactors. Results from the Coordinated Research Project on Development of Advanced Methodologies for the Assessment of Passive Safety Systems Performance in Advanced Reactors

    International Nuclear Information System (INIS)

    2014-09-01

    Strong reliance on inherent and passive design features has become a hallmark of many advanced reactor designs, including several evolutionary designs and nearly all advanced small and medium sized reactor (SMR) designs. Advanced nuclear reactor designs incorporate several passive systems in addition to active ones — not only to enhance the operational safety of the reactors but also to eliminate the possibility of serious accidents. Accordingly, the assessment of the reliability of passive safety systems is a crucial issue to be resolved before their extensive use in future nuclear power plants. Several physical parameters affect the performance of a passive safety system, and their values at the time of operation are unknown a priori. The functions of passive systems are based on basic physical laws and thermodynamic principals, and they may not experience the same kind of failures as active systems. Hence, consistent efforts are required to qualify the reliability of passive systems. To support the development of advanced nuclear reactor designs with passive systems, investigations into their reliability using various methodologies are being conducted in several Member States with advanced reactor development programmes. These efforts include reliability methods for passive systems by the French Atomic Energy and Alternative Energies Commission, reliability evaluation of passive safety system by the University of Pisa, Italy, and assessment of passive system reliability by the Bhabha Atomic Research Centre, India. These different approaches seem to demonstrate a consensus on some aspects. However, the developers of the approaches have been unable to agree on the definition of reliability in a passive system. Based on these developments and in order to foster collaboration, the IAEA initiated the Coordinated Research Project (CRP) on Development of Advanced Methodologies for the Assessment of Passive Safety Systems Performance in Advanced Reactors in 2008. The

  7. Program integration of predictive maintenance with reliability centered maintenance

    International Nuclear Information System (INIS)

    Strong, D.K. Jr; Wray, D.M.

    1990-01-01

    This paper addresses improving the safety and reliability of power plants in a cost-effective manner by integrating the recently developed reliability centered maintenance techniques with the traditional predictive maintenance techniques of nuclear power plants. The topics of the paper include a description of reliability centered maintenance (RCM), enhancing RCM with predictive maintenance, predictive maintenance programs, condition monitoring techniques, performance test techniques, the mid-Atlantic Reliability Centered Maintenance Users Group, test guides and the benefits of shared guide development

  8. ES-RBE Event sequence reliability Benchmark exercise

    International Nuclear Information System (INIS)

    Poucet, A.E.J.

    1991-01-01

    The event Sequence Reliability Benchmark Exercise (ES-RBE) can be considered as a logical extension of the other three Reliability Benchmark Exercices : the RBE on Systems Analysis, the RBE on Common Cause Failures and the RBE on Human Factors. The latter, constituting Activity No. 1, was concluded by the end of 1987. The ES-RBE covered the techniques that are currently used for analysing and quantifying sequences of events starting from an initiating event to various plant damage states, including analysis of various system failures and/or successes, human intervention failure and/or success and dependencies between systems. By this way, one of the scopes of the ES-RBE was to integrate the experiences gained in the previous exercises

  9. Development of reliability database for safety-related I and C component based on operating experience of KSNP

    International Nuclear Information System (INIS)

    Jang, S. C.; Han, S. H.; Min, K. R.

    2001-01-01

    Reliability database for safety-related I and C components has been developed, based on domestic operating experience of total 8.63 years from four units-Yonggwang Units 3 and 4, and Ulchin Units 3 and 4. This plant-specific data of safety-related I and C components has compared with operating experience for CE-supplied plants in U.S.A. As a results, we found that on the whole the domestic reliability data was similar to CE-supplied plants in USA, through lots of failures occurred early in the commercial operation were included in our analyses without percolation

  10. Development of a morphology-based modeling technique for tracking solid-body displacements: examining the reliability of a potential MRI-only approach for joint kinematics assessment

    International Nuclear Information System (INIS)

    Mahato, Niladri K.; Montuelle, Stephane; Cotton, John; Williams, Susan; Thomas, James; Clark, Brian

    2016-01-01

    Single or biplanar video radiography and Roentgen stereophotogrammetry (RSA) techniques used for the assessment of in-vivo joint kinematics involves application of ionizing radiation, which is a limitation for clinical research involving human subjects. To overcome this limitation, our long-term goal is to develop a magnetic resonance imaging (MRI)-only, three dimensional (3-D) modeling technique that permits dynamic imaging of joint motion in humans. Here, we present our initial findings, as well as reliability data, for an MRI-only protocol and modeling technique. We developed a morphology-based motion-analysis technique that uses MRI of custom-built solid-body objects to animate and quantify experimental displacements between them. The technique involved four major steps. First, the imaging volume was calibrated using a custom-built grid. Second, 3-D models were segmented from axial scans of two custom-built solid-body cubes. Third, these cubes were positioned at pre-determined relative displacements (translation and rotation) in the magnetic resonance coil and scanned with a T 1 and a fast contrast-enhanced pulse sequences. The digital imaging and communications in medicine (DICOM) images were then processed for animation. The fourth step involved importing these processed images into an animation software, where they were displayed as background scenes. In the same step, 3-D models of the cubes were imported into the animation software, where the user manipulated the models to match their outlines in the scene (rotoscoping) and registered the models into an anatomical joint system. Measurements of displacements obtained from two different rotoscoping sessions were tested for reliability using coefficient of variations (CV), intraclass correlation coefficients (ICC), Bland-Altman plots, and Limits of Agreement analyses. Between-session reliability was high for both the T 1 and the contrast-enhanced sequences. Specifically, the average CVs for translation were 4

  11. Development of a morphology-based modeling technique for tracking solid-body displacements: examining the reliability of a potential MRI-only approach for joint kinematics assessment.

    Science.gov (United States)

    Mahato, Niladri K; Montuelle, Stephane; Cotton, John; Williams, Susan; Thomas, James; Clark, Brian

    2016-05-18

    Single or biplanar video radiography and Roentgen stereophotogrammetry (RSA) techniques used for the assessment of in-vivo joint kinematics involves application of ionizing radiation, which is a limitation for clinical research involving human subjects. To overcome this limitation, our long-term goal is to develop a magnetic resonance imaging (MRI)-only, three dimensional (3-D) modeling technique that permits dynamic imaging of joint motion in humans. Here, we present our initial findings, as well as reliability data, for an MRI-only protocol and modeling technique. We developed a morphology-based motion-analysis technique that uses MRI of custom-built solid-body objects to animate and quantify experimental displacements between them. The technique involved four major steps. First, the imaging volume was calibrated using a custom-built grid. Second, 3-D models were segmented from axial scans of two custom-built solid-body cubes. Third, these cubes were positioned at pre-determined relative displacements (translation and rotation) in the magnetic resonance coil and scanned with a T1 and a fast contrast-enhanced pulse sequences. The digital imaging and communications in medicine (DICOM) images were then processed for animation. The fourth step involved importing these processed images into an animation software, where they were displayed as background scenes. In the same step, 3-D models of the cubes were imported into the animation software, where the user manipulated the models to match their outlines in the scene (rotoscoping) and registered the models into an anatomical joint system. Measurements of displacements obtained from two different rotoscoping sessions were tested for reliability using coefficient of variations (CV), intraclass correlation coefficients (ICC), Bland-Altman plots, and Limits of Agreement analyses. Between-session reliability was high for both the T1 and the contrast-enhanced sequences. Specifically, the average CVs for translation were 4

  12. Reliability and optimization of structural systems

    International Nuclear Information System (INIS)

    Thoft-Christensen, P.

    1987-01-01

    The proceedings contain 28 papers presented at the 1st working conference. The working conference was organized by the IFIP Working Group 7.5. The proceedings also include 4 papers which were submitted, but for various reasons not presented at the working conference. The working conference was attended by 50 participants from 18 countries. The conference was the first scientific meeting of the new IFIP Working Group 7.5 on 'Reliability and Optimization of Structural Systems'. The purpose of the Working Group 7.5 is to promote modern structural system optimization and reliability theory, to advance international cooperation in the field of structural system optimization and reliability theory, to stimulate research, development and application of structural system optimization and reliability theory, to further the dissemination and exchange of information on reliability and optimization of structural system optimization and reliability theory, and to encourage education in structural system optimization and reliability theory. (orig./HP)

  13. Developing Predictive Maintenance Expertise to Improve Plant Equipment Reliability

    International Nuclear Information System (INIS)

    Wurzbach, Richard N.

    2002-01-01

    On-line equipment condition monitoring is a critical component of the world-class production and safety histories of many successful nuclear plant operators. From addressing availability and operability concerns of nuclear safety-related equipment to increasing profitability through support system reliability and reduced maintenance costs, Predictive Maintenance programs have increasingly become a vital contribution to the maintenance and operation decisions of nuclear facilities. In recent years, significant advancements have been made in the quality and portability of many of the instruments being used, and software improvements have been made as well. However, the single most influential component of the success of these programs is the impact of a trained and experienced team of personnel putting this technology to work. Changes in the nature of the power generation industry brought on by competition, mergers, and acquisitions, has taken the historically stable personnel environment of power generation and created a very dynamic situation. As a result, many facilities have seen a significant turnover in personnel in key positions, including predictive maintenance personnel. It has become the challenge for many nuclear operators to maintain the consistent contribution of quality data and information from predictive maintenance that has become important in the overall equipment decision process. These challenges can be met through the implementation of quality training to predictive maintenance personnel and regular updating and re-certification of key technology holders. The use of data management tools and services aid in the sharing of information across sites within an operating company, and with experts who can contribute value-added data management and analysis. The overall effectiveness of predictive maintenance programs can be improved through the incorporation of newly developed comprehensive technology training courses. These courses address the use of

  14. Lessons learned from the PISC III study of the influence on human factors on inspection reliability

    International Nuclear Information System (INIS)

    Murgatroyd, R.A.; Worrall, G.M.; Crutzen, S.

    1995-01-01

    Results from the PISC II Programme suggested that differences existed between manual inspectors in terms of their skills, knowledge and working practices which could exert a significant influence on the reliability on an inspection. Therefore, a programme of work on human reliability studies was initiated in the PISC III Programme as Action 7, with the objectives of studying and identifying causes of variability in inspection activities, and identifying some of the factors influencing the reliability of inspection in industrial conditions. It was foreseen that the information from Action 7 would aid in the development of methods for reducing the incidence of human error in inspection activities. This paper gives a brief summary of the programme and describes the lessons learned as a result of the work. A considerably more detailed description of the work is available as a PISC report. 3 refs, 3 figs

  15. An examination of reliability critical items in liquid metal reactors: An analysis by the Centralized Reliability Data Organization (CREDO)

    International Nuclear Information System (INIS)

    Humphrys, B.L.; Haire, M.J.; Koger, K.H.; Manneschmidt, J.F.; Setoguchi, K.; Nakai, R.; Okubo, Y.

    1987-01-01

    The Centralized Reliability Data Organization (CREDO) is the largest repository of liquid metal reactor (LMR) component reliability data in the world. It is jointly sponsored by the US Department of Energy (DOE) and the Power Reactor and Nuclear Fuel Development Corporation (PNC) of Japan. The CREDO data base contains information on a population of more than 21,000 components and approximately 1300 event records. A conservative estimation is that the total component operating hours is approaching 3.5 billion hours. Because data gathering for CREDO concentrates on event (failure) information, the work reported here focuses on the reliability information contained in CREDO and the development of reliability critical items lists. That is, components are ranked in prioritized lists from worst to best performers from a reliability standpoint. For the data contained in the CREDO data base, FFTF and JOYO show reliability growth; EBR-II reveals a slight unreliability growth for those components tracked by CREDO. However, tabulations of events which cause reactor shutdowns decrease with time at each site

  16. Development of reliability program for emergency diesel generators in domestic nuclear power plants

    International Nuclear Information System (INIS)

    Kim, Young Ho; Jung, Hyun Jong; Choi, Kwang Hee; Hong, Seoung Yeul

    2001-01-01

    Surveillance tests of Emergency Diesel Generators (EDGs) in Nuclear Power Plants (NPPs) have been conducted periodically to verify the reliability and integrity of the EDGs, however, it was found that these surveillance methods were so conservative and severe as to accelerate the degradation of the EDGs. Hence, new regulatory guideline, Reg. Guide 1.9 Rev. 3, was established by the U.S. NRC to resolve these problems. But it requires the additional implementation of reliability program of the EDGs to improve the actual reliability of them. In Korea, the EDGs of Yonggwang nuclear units 3 and 4 were the first plant applying new Reg. guide 1.9 rev.3 and implementing EDG reliability program. Furthermore it is expected that new guideline for the EDGs will be applied to other EDGs of Korean NPPs. In this paper, this reliability program is described, and it can be used as a reference for other EDGs in Korean NPPs

  17. Reliability evaluation of power systems

    CERN Document Server

    Billinton, Roy

    1996-01-01

    The Second Edition of this well-received textbook presents over a decade of new research in power system reliability-while maintaining the general concept, structure, and style of the original volume. This edition features new chapters on the growing areas of Monte Carlo simulation and reliability economics. In addition, chapters cover the latest developments in techniques and their application to real problems. The text also explores the progress occurring in the structure, planning, and operation of real power systems due to changing ownership, regulation, and access. This work serves as a companion volume to Reliability Evaluation of Engineering Systems: Second Edition (1992).

  18. Development of innovative inspection tools for higher reliability of PHWR fuel

    International Nuclear Information System (INIS)

    Kamalesh Kumar, B.; Viswanathan, B.; Laxminarayana, B.; Ganguly, C.

    2003-01-01

    'Full text:' Advent of Computer aided manufacturing systems has led to very high rate of production with greater reliability. The conventional inspection tools and systems, which are often manual based do not complement with output of highly automated production line. In order to overcome the deficiency, a strategic plan was developed for having automated inspection facility for PHWR fuel assembly line. Laser based systems with their inherently high accuracy and quick response times are a favorite for metrology purpose. Non-contact nature of laser-based measurement ensures minimal contamination, low wear and tear and good repeatability. So far two laser-based systems viz. Pellet density measurement systems and triangulation sensors have been developed. Laser based fuel pellet inspection system and PHWR fuel bundle metric station are under development. Machine vision-based systems have been developed to overcome certain limitations when inspection has to be carried out on such a large scale manually. These deficiencies arise from limitations of resolution, accessibility, fatigue and absence of quantification ability. These problems get further compounded in inspection of fuel components because of their relatively small sizes, close tolerances required and the reflective surfaces. PC based vision system has been developed for inspecting components and fuel assemblies. The paper would touch upon the details of the various laser systems and vision systems that have been indigenously developed for PHWR Fuel Metrology and their impact on the assembly production line. (author)

  19. The Development of Marine Accidents Human Reliability Assessment Approach: HEART Methodology and MOP Model

    OpenAIRE

    Ludfi Pratiwi Bowo; Wanginingastuti Mutmainnah; Masao Furusho

    2017-01-01

    Humans are one of the important factors in the assessment of accidents, particularly marine accidents. Hence, studies are conducted to assess the contribution of human factors in accidents. There are two generations of Human Reliability Assessment (HRA) that have been developed. Those methodologies are classified by the differences of viewpoints of problem-solving, as the first generation and second generation. The accident analysis can be determined using three techniques of analysis; sequen...

  20. Network reliability analysis of complex systems using a non-simulation-based method

    International Nuclear Information System (INIS)

    Kim, Youngsuk; Kang, Won-Hee

    2013-01-01

    Civil infrastructures such as transportation, water supply, sewers, telecommunications, and electrical and gas networks often establish highly complex networks, due to their multiple source and distribution nodes, complex topology, and functional interdependence between network components. To understand the reliability of such complex network system under catastrophic events such as earthquakes and to provide proper emergency management actions under such situation, efficient and accurate reliability analysis methods are necessary. In this paper, a non-simulation-based network reliability analysis method is developed based on the Recursive Decomposition Algorithm (RDA) for risk assessment of generic networks whose operation is defined by the connections of multiple initial and terminal node pairs. The proposed method has two separate decomposition processes for two logical functions, intersection and union, and combinations of these processes are used for the decomposition of any general system event with multiple node pairs. The proposed method is illustrated through numerical network examples with a variety of system definitions, and is applied to a benchmark gas transmission pipe network in Memphis TN to estimate the seismic performance and functional degradation of the network under a set of earthquake scenarios.

  1. Advances in reliability and system engineering

    CERN Document Server

    Davim, J

    2017-01-01

    This book presents original studies describing the latest research and developments in the area of reliability and systems engineering. It helps the reader identifying gaps in the current knowledge and presents fruitful areas for further research in the field. Among others, this book covers reliability measures, reliability assessment of multi-state systems, optimization of multi-state systems, continuous multi-state systems, new computational techniques applied to multi-state systems and probabilistic and non-probabilistic safety assessment.

  2. A reliability program approach to operational safety

    International Nuclear Information System (INIS)

    Mueller, C.J.; Bezella, W.A.

    1985-01-01

    A Reliability Program (RP) model based on proven reliability techniques is being formulated for potential application in the nuclear power industry. Methods employed under NASA and military direction, commercial airline and related FAA programs were surveyed and a review of current nuclear risk-dominant issues conducted. The need for a reliability approach to address dependent system failures, operating and emergency procedures and human performance, and develop a plant-specific performance data base for safety decision making is demonstrated. Current research has concentrated on developing a Reliability Program approach for the operating phase of a nuclear plant's lifecycle. The approach incorporates performance monitoring and evaluation activities with dedicated tasks that integrate these activities with operation, surveillance, and maintenance of the plant. The detection, root-cause evaluation and before-the-fact correction of incipient or actual systems failures as a mechanism for maintaining plant safety is a major objective of the Reliability Program. (orig./HP)

  3. Reliability analysis of diverse safety logic systems of fast breeder reactor

    International Nuclear Information System (INIS)

    Ravi Kumar, Bh.; Apte, P.R.; Srivani, L.; Ilango Sambasivan, S.; Swaminathan, P.

    2006-01-01

    Safety Logic for Fast Breeder Reactor (FBR) is designed to initiate safety action against Design Basis Events. Based on the outputs of various processing circuits, Safety logic system drives the control rods of the shutdown system. So, Safety Logic system is classified as safety critical system. Therefore, reliability analysis has to be performed. This paper discusses the Reliability analysis of Diverse Safety logic systems of FBRs. For this literature survey on safety critical systems, system reliability approach and standards to be followed like IEC-61508 are discussed in detail. For Programmable Logic device based systems, Hardware Description Languages (HDL) are used. So this paper also discusses the Verification and Validation for HDLs. Finally a case study for the Reliability analysis of Safety logic is discussed. (author)

  4. Human factors reliability benchmark exercise

    International Nuclear Information System (INIS)

    Poucet, A.

    1989-08-01

    The Joint Research Centre of the European Commission has organised a Human Factors Reliability Benchmark Exercise (HF-RBE) with the aim of assessing the state of the art in human reliability modelling and assessment. Fifteen teams from eleven countries, representing industry, utilities, licensing organisations and research institutes, participated in the HF-RBE. The HF-RBE was organised around two study cases: (1) analysis of routine functional Test and Maintenance (TPM) procedures: with the aim of assessing the probability of test induced failures, the probability of failures to remain unrevealed and the potential to initiate transients because of errors performed in the test; (2) analysis of human actions during an operational transient: with the aim of assessing the probability that the operators will correctly diagnose the malfunctions and take proper corrective action. This report summarises the contributions received from the participants and analyses these contributions on a comparative basis. The aim of this analysis was to compare the procedures, modelling techniques and quantification methods used, to obtain insight in the causes and magnitude of the variability observed in the results, to try to identify preferred human reliability assessment approaches and to get an understanding of the current state of the art in the field identifying the limitations that are still inherent to the different approaches

  5. Reliability criteria selection for integrated resource planning

    International Nuclear Information System (INIS)

    Ruiu, D.; Ye, C.; Billinton, R.; Lakhanpal, D.

    1993-01-01

    A study was conducted on the selection of a generating system reliability criterion that ensures a reasonable continuity of supply while minimizing the total costs to utility customers. The study was conducted using the Institute for Electronic and Electrical Engineers (IEEE) reliability test system as the study system. The study inputs and results for conditions and load forecast data, new supply resources data, demand-side management resource data, resource planning criterion, criterion value selection, supply side development, integrated resource development, and best criterion values, are tabulated and discussed. Preliminary conclusions are drawn as follows. In the case of integrated resource planning, the selection of the best value for a given type of reliability criterion can be done using methods similar to those used for supply side planning. The reliability criteria values previously used for supply side planning may not be economically justified when integrated resource planning is used. Utilities may have to revise and adopt new, and perhaps lower supply reliability criteria for integrated resource planning. More complex reliability criteria, such as energy related indices, which take into account the magnitude, frequency and duration of the expected interruptions are better adapted than the simpler capacity-based reliability criteria such as loss of load expectation. 7 refs., 5 figs., 10 tabs

  6. Portfolios for determining initial licensure competency.

    Science.gov (United States)

    Chambers, David W

    2004-02-01

    Because attempts to improve initial licensure examinations have not been grounded in measurement theory, partial and inadequate remedies have led to a cycle of refutations, defenses and political polarization. The author reviewed the psychometric literature, focusing on high-stakes professional decisions. Editorials in the dental literature and position papers of involved organizations often use words from this literature without incorporating its fundamental concepts. The reliability of one-shot initial licensure examinations is estimated to be approximately r = .40, which is a value well under the standard for such tests in other professions. Validity has not been investigated rigorously, but the one-shot format and proposals to remove live patients certainly would reduce validity. The use of portfolios--a small number of evaluations in several realistic task domains--is a viable means of achieving psychometric standards for initial licensure decisions. Boards are charged with making valid and reliable licensure decisions, not with conducting examinations. At a minimum, they must define the competencies of beginning practitioners and establish the psychometric criteria for their decisions (neither of which are done currently). Gathering data then can be delegated to whoever is best qualified to meet these standards.

  7. Automated Work Package: Initial Wireless Communication Platform Design, Development, and Evaluation

    Energy Technology Data Exchange (ETDEWEB)

    Al Rashdan, Ahmad Yahya Mohammad [Idaho National Laboratory; Agarwal, Vivek [Idaho National Laboratory

    2016-03-01

    The Department of Energy’s Light Water Reactor Sustainability Program is developing the scientific basis to ensure long-term reliability, productivity, safety, and security of the nuclear power industry in the United States. The Instrumentation, Information, and Control (II&C) pathway of the program aims to increase the role of advanced II&C technologies to achieve this objective. One of the pathway efforts at Idaho National Laboratory (INL) is to improve the work packages execution process by replacing the expensive, inefficient, bulky, complex, and error-prone paper-based work orders with automated work packages (AWPs). An AWP is an automated and dynamic presentation of the work package designed to guide the user through the work process. It is loaded on a mobile device, such as a tablet, and is capable of communicating with plant equipment and systems to acquire plant and procedure states. The AWP replaces those functions where a computer is more efficient and reliable than a human. To enable the automatic acquisition of plant data, it is necessary to design and develop a prototype platform for data exchange between the field instruments and the AWP mobile devices. The development of the platform aims to reveal issues and solutions generalizable to large-scale implementation of a similar system. Topics such as bandwidth, robustness, response time, interference, and security are usually associated with wireless communication. These concerns, along with other requirements, are listed in an earlier INL report. Specifically, the targeted issues and performance aspects in this work are relevant to the communication infrastructure from the perspective of promptness, robustness, expandability, and interoperability with different technologies.

  8. Reliability and validity in a nutshell.

    Science.gov (United States)

    Bannigan, Katrina; Watson, Roger

    2009-12-01

    To explore and explain the different concepts of reliability and validity as they are related to measurement instruments in social science and health care. There are different concepts contained in the terms reliability and validity and these are often explained poorly and there is often confusion between them. To develop some clarity about reliability and validity a conceptual framework was built based on the existing literature. The concepts of reliability, validity and utility are explored and explained. Reliability contains the concepts of internal consistency and stability and equivalence. Validity contains the concepts of content, face, criterion, concurrent, predictive, construct, convergent (and divergent), factorial and discriminant. In addition, for clinical practice and research, it is essential to establish the utility of a measurement instrument. To use measurement instruments appropriately in clinical practice, the extent to which they are reliable, valid and usable must be established.

  9. PV Systems Reliability Final Technical Report.

    Energy Technology Data Exchange (ETDEWEB)

    Lavrova, Olga [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Flicker, Jack David [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Johnson, Jay [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Armijo, Kenneth Miguel [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Gonzalez, Sigifredo [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Schindelholz, Eric John [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Sorensen, Neil R. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Yang, Benjamin Bing-Yeh [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2015-12-01

    The continued exponential growth of photovoltaic technologies paves a path to a solar-powered world, but requires continued progress toward low-cost, high-reliability, high-performance photovoltaic (PV) systems. High reliability is an essential element in achieving low-cost solar electricity by reducing operation and maintenance (O&M) costs and extending system lifetime and availability, but these attributes are difficult to verify at the time of installation. Utilities, financiers, homeowners, and planners are demanding this information in order to evaluate their financial risk as a prerequisite to large investments. Reliability research and development (R&D) is needed to build market confidence by improving product reliability and by improving predictions of system availability, O&M cost, and lifetime. This project is focused on understanding, predicting, and improving the reliability of PV systems. The two areas being pursued include PV arc-fault and ground fault issues, and inverter reliability.

  10. Development and application of probabilistic safety assessment PSA in Daya Bay Nuclear Power Station

    International Nuclear Information System (INIS)

    Huang Weigang; Chen Jiefei; Guo Jianbing; Zhen Wei

    2005-01-01

    This paper discusses the development and application of Level 1 PSA used for safety review, risk monitoring and on line maintenance of the nuclear power plant. PSA development includes the analysis of event tree, fault tree, FMEA, PSA quantification and the equipment reliability database. We have collected and processed the reliability data of external power source, the equipment reliability data and the initial event frequency. The thermal-hydraulics analysis of some important events and accidents, human factor analysis, and the calculation of human error probability have been made. During the development of event trees and fault trees, the effect of some support systems such as compressed air distribution system, ventilation system and electrical system have been taken into account. The system manuals, operation procedures and emergency operating procedures of Daya Bay NPP are referred to in this project. The operators of the NPP were involved in the establishment of all event trees and fault trees analysis. Furthermore, we have accepted the suggestion of IAEA experts, completed the logic chart of initial events to the initial events analysis of Daya Bay NPP, and optimized the code system of PSA model again. Together with the development of the reliability database, by absorbing the advanced experience of EDF, we have gained the reports about equipment's classifying, function and experience feedback information of Daya Bay NPP. According to the quantitative calculation of the latest Level 1 PSA Model of Daya Bay NPP, the results of Core Damage Frequency (CDF) is: CDF = 2.13E-5/reactor . year. The latest PSA Model of Daya Bay NPP includes: 1) 12 sorts of initial events, 67 sub-initial events, 70 fault trees; 2) 25 nuclear safety related systems were developed by fault trees and FMEA ; 3) 2609 fault tree logic gates; 4) 2146 basic events; 5) 680 core damage accident sequences. (authors)

  11. The design organization test: further demonstration of reliability and validity as a brief measure of visuospatial ability.

    Science.gov (United States)

    Killgore, William D S; Gogel, Hannah

    2014-01-01

    Neuropsychological assessments are frequently time-consuming and fatiguing for patients. Brief screening evaluations may reduce test duration and allow more efficient use of time by permitting greater attention toward neuropsychological domains showing probable deficits. The Design Organization Test (DOT) was initially developed as a 2-min paper-and-pencil alternative for the Block Design (BD) subtest of the Wechsler scales. Although initially validated for clinical neurologic patients, we sought to further establish the reliability and validity of this test in a healthy, more diverse population. Two alternate versions of the DOT and the Wechsler Abbreviated Scale of Intelligence (WASI) were administered to 61 healthy adult participants. The DOT showed high alternate forms reliability (r = .90-.92), and the two versions yielded equivalent levels of performance. The DOT was highly correlated with BD (r = .76-.79) and was significantly correlated with all subscales of the WASI. The DOT proved useful when used in lieu of BD in the calculation of WASI IQ scores. Findings support the reliability and validity of the DOT as a measure of visuospatial ability and suggest its potential worth as an efficient estimate of intellectual functioning in situations where lengthier tests may be inappropriate or unfeasible.

  12. Reliability demonstration test planning: A three dimensional consideration

    International Nuclear Information System (INIS)

    Yadav, Om Prakash; Singh, Nanua; Goel, Parveen S.

    2006-01-01

    Increasing customer demand for reliability, fierce market competition on time-to-market and cost, and highly reliable products are making reliability testing more challenging task. This paper presents a systematic approach for identifying critical elements (subsystems and components) of the system and deciding the types of test to be performed to demonstrate reliability. It decomposes the system into three dimensions (i.e. physical, functional and time) and identifies critical elements in the design by allocating system level reliability to each candidate. The decomposition of system level reliability is achieved by using criticality index. The numerical value of criticality index for each candidate is derived based on the information available from failure mode and effects analysis (FMEA) document or warranty data from a prior system. It makes use of this information to develop reliability demonstration test plan for the identified (critical) failure mechanisms and physical elements. It also highlights the benefits of using prior information in order to locate critical spots in the design and in subsequent development of test plans. A case example is presented to demonstrate the proposed approach

  13. Standardization, Validity and Reliability Study of Gülhane Aphasia Test-2 (GAT-2

    Directory of Open Access Journals (Sweden)

    İlknur Maviş

    2007-04-01

    Full Text Available OBJECTIVE: Gülhane Aphasia Test-2 (GAT-2 has been developed to show the presence of a language disorder ‘aphasia’ and to give the clinician implications for the accompanying speech disorders such as apraxia and dysarthria. OBJECTIVE: The aim of the study was to report standardization, validity and reliability study of GAT-2. METHODS: : 10 healthy individuals were tested initially for the pilot study. 134 healthy individual was included to the standardization study and 30 individuals with aphasia and 11 individuals with right brain injury was included to the validation study. The inter group GAT-2 score differentiations and the effects of age, years of education, sex variances were observed. GAT-2 cut-off scores were calculated by the scores of healthy individuals. GAT-2 test-retest reliability and inter-observer reliability was calculated. RESULTS: Healthy individuals’ GAT-2 scores were significantly different from the GAT-2 scores of aphasic patients, but not from right brain injured patients’. Healthy individuals’ GAT-2 scores were not affected from the sex, age variances but from years of education, so cut-off scores were calculated by this variance. GAT-2 scores of aphasic patients were not affected from age, sex and years of education. Test-retest and inter-observer reliability and internal consistency results showed that GAT-2 is a highly reliable aphasia screening test. CONCLUSION: GAT-2 was found to be a standardized, highly reliable and a valid aphasia test for Turkish stroke patients with aphasia

  14. Development of an analysis rule of diagnosis error for standard method of human reliability analysis

    International Nuclear Information System (INIS)

    Jeong, W. D.; Kang, D. I.; Jeong, K. S.

    2003-01-01

    This paper presents the status of development of Korea standard method for Human Reliability Analysis (HRA), and proposed a standard procedure and rules for the evaluation of diagnosis error probability. The quality of KSNP HRA was evaluated using the requirement of ASME PRA standard guideline, and the design requirement for the standard HRA method was defined. Analysis procedure and rules, developed so far, to analyze diagnosis error probability was suggested as a part of the standard method. And also a study of comprehensive application was performed to evaluate the suitability of the proposed rules

  15. "Initiate-build-operate-transfer"--a strategy for establishing sustainable telemedicine programs in developing countries: initial lessons from the balkans.

    Science.gov (United States)

    Latifi, Rifat; Merrell, Ronald C; Doarn, Charles R; Hadeed, George J; Bekteshi, Flamur; Lecaj, Ismet; Boucha, Kathe; Hajdari, Fatmir; Hoxha, Astrit; Koshi, Dashurije; de Leonni Stanonik, Mateja; Berisha, Blerim; Novoberdaliu, Kadri; Imeri, Arben; Weinstein, Ronald S

    2009-12-01

    Establishing sustainable telemedicine has become a goal of many developing countries around the world. Yet, despite initiatives from a select few individuals and on occasion from various governments, often these initiatives never mature to become sustainable programs. The introduction of telemedicine and e-learning in Kosova has been a pivotal step in advancing the quality and availability of medical services in a region whose infrastructure and resources have been decimated by wars, neglect, lack of funding, and poor management. The concept and establishment of the International Virtual e-Hospital (IVeH) has significantly impacted telemedicine and e-health services in the Balkans. The success of the IVeH in Kosova has led to the development of similar programs in other Balkan countries and other developing countries in the hope of modernizing and improving their healthcare infrastructure. A comprehensive, four-pronged strategy, "Initiate-Build-Operate-Transfer" (IBOT), may be a useful approach in establishing telemedicine and e-health educational services in developing countries. The development strategy, IBOT, used by the IVeH to establish and develop telemedicine programs, was discussed. IBOT includes assessment of healthcare needs of each country, the development of a curriculum and education program, the establishment of a nationwide telemedicine network, and the integration of the telemedicine program into the healthcare infrastructure. The endpoint is the transfer of a sustainable telehealth program to the nation involved. By applying IBOT, a sustainable telemedicine program of Kosova has been established as an effective prototype for telemedicine in the Balkans. Once fully matured, the program will be transitioned to the national Ministry of Health, which ensures the sustainability and ownership of the program. Similar programs are being established in Albania, Macedonia, and other countries around the world. The IBOT model has been effective in creating

  16. Quantitative developments in the cognitive reliability and error analysis method (CREAM) for the assessment of human performance

    International Nuclear Information System (INIS)

    Marseguerra, Marzio; Zio, Enrico; Librizzi, Massimo

    2006-01-01

    The current 'second generation' approaches in human reliability analysis focus their attention on the contextual conditions under which a given action is performed rather than on the notion of inherent human error probabilities, as was done in the earlier 'first generation' techniques. Among the 'second generation' methods, this paper considers the Cognitive Reliability and Error Analysis Method (CREAM) and proposes some developments with respect to a systematic procedure for computing probabilities of action failure. The starting point for the quantification is a previously introduced fuzzy version of the CREAM paradigm which is here further extended to include uncertainty on the qualification of the conditions under which the action is performed and to account for the fact that the effects of the common performance conditions (CPCs) on performance reliability may not all be equal. By the proposed approach, the probability of action failure is estimated by rating the performance conditions in terms of their effect on the action

  17. Concurrent validity and reliability of using ground reaction force and center of pressure parameters in the determination of leg movement initiation during single leg lift.

    Science.gov (United States)

    Aldabe, Daniela; de Castro, Marcelo Peduzzi; Milosavljevic, Stephan; Bussey, Melanie Dawn

    2016-09-01

    Postural adjustment evaluations during single leg lift requires the initiation of heel lift (T1) identification. T1 measured by means of motion analyses system is the most reliable approach. However, this method involves considerable workspace, expensive cameras, and time processing data and setting up laboratory. The use of ground reaction forces (GRF) and centre of pressure (COP) data is an alternative method as its data processing and setting up is less time consuming. Further, kinetic data is normally collected using frequency samples higher than 1000Hz whereas kinematic data are commonly captured using 50-200Hz. This study describes the concurrent-validity and reliability of GRF and COP measurements in determining T1, using a motion analysis system as reference standard. Kinematic and kinetic data during single leg lift were collected from ten participants. GRF and COP data were collected using one and two force plates. Displacement of a single heel marker was captured by means of ten Vicon(©) cameras. Kinetic and kinematic data were collected using a sample frequency of 1000Hz. Data were analysed in two stages: identification of key events in the kinetic data, and assessing concurrent validity of T1 based on the chosen key events with T1 provided by the kinematic data. The key event presenting the least systematic bias, along with a narrow 95% CI and limits of agreement against the reference standard T1, was the Baseline COPy event. Baseline COPy event was obtained using one force plate and presented excellent between-tester reliability. Copyright © 2016 Elsevier B.V. All rights reserved.

  18. Fuel reliability experience in Finland

    International Nuclear Information System (INIS)

    Kekkonen, L.

    2015-01-01

    Four nuclear reactors have operated in Finland now for 35-38 years. The two VVER-440 units at Loviisa Nuclear Power Plant are operated by Fortum and two BWR’s in Olkiluoto are operated by Teollisuuden Voima Oyj (TVO). The fuel reliability experience of the four reactors operating currently in Finland has been very good and the fuel failure rates have been very low. Systematic inspection of spent fuel assemblies, and especially all failed assemblies, is a good practice that is employed in Finland in order to improve fuel reliability and operational safety. Investigation of the root cause of fuel failures is important in developing ways to prevent similar failures in the future. The operational and fuel reliability experience at the Loviisa Nuclear Power Plant has been reported also earlier in the international seminars on WWER Fuel Performance, Modelling and Experimental Support. In this paper the information on fuel reliability experience at Loviisa NPP is updated and also a short summary of the fuel reliability experience at Olkiluoto NPP is given. Keywords: VVER-440, fuel reliability, operational experience, poolside inspections, fuel failure identification. (author)

  19. Reliability Estimation for Digital Instrument/Control System

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Yaguang; Sydnor, Russell [U.S. Nuclear Regulatory Commission, Washington, D.C. (United States)

    2011-08-15

    Digital instrumentation and controls (DI and C) systems are widely adopted in various industries because of their flexibility and ability to implement various functions that can be used to automatically monitor, analyze, and control complicated systems. It is anticipated that the DI and C will replace the traditional analog instrumentation and controls (AI and C) systems in all future nuclear reactor designs. There is an increasing interest for reliability and risk analyses for safety critical DI and C systems in regulatory organizations, such as The United States Nuclear Regulatory Commission. Developing reliability models and reliability estimation methods for digital reactor control and protection systems will involve every part of the DI and C system, such as sensors, signal conditioning and processing components, transmission lines and digital communication systems, D/A and A/D converters, computer system, signal processing software, control and protection software, power supply system, and actuators. Some of these components are hardware, such as sensors and actuators, their failure mechanisms are well understood, and the traditional reliability model and estimation methods can be directly applied. But many of these components are firmware which has software embedded in the hardware, and software needs special consideration because its failure mechanism is unique, and the reliability estimation method for a software system will be different from the ones used for hardware systems. In this paper, we will propose a reliability estimation method for the entire DI and C system reliability using a recently developed software reliability estimation method and a traditional hardware reliability estimation method.

  20. Reliability Estimation for Digital Instrument/Control System

    International Nuclear Information System (INIS)

    Yang, Yaguang; Sydnor, Russell

    2011-01-01

    Digital instrumentation and controls (DI and C) systems are widely adopted in various industries because of their flexibility and ability to implement various functions that can be used to automatically monitor, analyze, and control complicated systems. It is anticipated that the DI and C will replace the traditional analog instrumentation and controls (AI and C) systems in all future nuclear reactor designs. There is an increasing interest for reliability and risk analyses for safety critical DI and C systems in regulatory organizations, such as The United States Nuclear Regulatory Commission. Developing reliability models and reliability estimation methods for digital reactor control and protection systems will involve every part of the DI and C system, such as sensors, signal conditioning and processing components, transmission lines and digital communication systems, D/A and A/D converters, computer system, signal processing software, control and protection software, power supply system, and actuators. Some of these components are hardware, such as sensors and actuators, their failure mechanisms are well understood, and the traditional reliability model and estimation methods can be directly applied. But many of these components are firmware which has software embedded in the hardware, and software needs special consideration because its failure mechanism is unique, and the reliability estimation method for a software system will be different from the ones used for hardware systems. In this paper, we will propose a reliability estimation method for the entire DI and C system reliability using a recently developed software reliability estimation method and a traditional hardware reliability estimation method

  1. Resolution of GSI B-56 - Emergency diesel generator reliability

    International Nuclear Information System (INIS)

    Serkiz, A.W.

    1989-01-01

    The need for an emergency diesel generator (EDG) reliability program has been established by 10 CFR Part 50, Section 50.63, Loss of All Alternating Current Power, which requires that licensees assess their station blackout coping and recovery capability. EDGs are the principal emergency ac power sources for avoiding a station blackout. Regulatory Guide 1.155, Station Blackout, identifies a need for (1) a nuclear unit EDG reliability level of at least 0.95, and (2) an EDG reliability program to monitor and maintain the required EDG reliability levels. NUMARC-8700, Guidelines and Technical Bases for NUMARC Initiatives Addressing Station Blackout at Light Water Reactors, also provides guidance on such needs. The resolution of GSI B-56, Diesel Reliability will be accomplished by issuing Regulatory Guide 1.9, Rev. 3, Selection, Design, Qualification, Testing, and Reliability of Diesel Generator Units Used as Onsite Electric Power Systems at Nuclear Plants. This revision will integrate into a single regulatory guide pertinent guidance previously addressed in R.G. 1.9, Rev. 2, R.G. 1.108, and Generic Letter 84-15. R.G. 1.9 has been expanded to define the principal elements of an EDG reliability program for monitoring and maintaining EDG reliability levels selected for SBO. In addition, alert levels and corrective actions have been defined to detect a deteriorating situation for all EDGs assigned to a particular nuclear unit, as well as an individual problem EDG

  2. Addressing the reliability issues of intelligent well systems

    International Nuclear Information System (INIS)

    Drakeley, Brian; Douglas, Neil

    2000-01-01

    New Technology receives its fair share of 'risk aversion' both in good and not so good economic times from oil and gas operators evaluating application opportunities. This paper presents details of a strategy developed and implemented to bring to market an Intelligent Well system designed from day one to maximize system reliability, while offering the customer a high degree of choice in system functionality. A team of engineers and scientists skilled in all aspects of Reliability Analysis and Assessment analyzed the Intelligent Well system under development, gathered reliability performance data from other sources and using various analytical techniques developed matrices of system survival probability estimates for various scenarios. Interaction with the system and design engineers has been an on-going process as designs are modified to maximize reliability predictions and extensive qualification test programs developed from the component to the overall system level. The techniques used in the development project will be presented. A comparative model now exists that facilitates the evaluation of future design alternative considerations and also contains databases that can be readily updated with actual field data etc. (author)

  3. The Leuven Adolescent Perceived Parenting Scale (LAPPS): Reliability and Validity with French-Speaking Adolescents in Belgium

    OpenAIRE

    Marie Delhaye; Wim Beyers; Theo A Klimstra; Paul Linkowski; Luc Goossens

    2012-01-01

    The present study examined the reliability and validity of the Leuven Adolescent Perceived Parenting Scale (LAPPS), an instrument initially developed for use with Dutch-speaking adolescents in Belgium, in French-speaking adolescents living in that same country. The instrument was administered to a sample of French-speaking adolescents ('N' = 625) and a carefully matched sample of Dutch-speaking adolescents ('N' = 630). Internal consistency (Cronbach's alpha), factor structure, and mean scores...

  4. Validity and reliability of Preschool Language Scale 4 for measuring language development in children 48-59 months of age

    Directory of Open Access Journals (Sweden)

    Nuryani Sidarta

    2016-04-01

    Full Text Available Prevalence rates for speech and language delay have been reported across wide ranges. Speech and language delay affects 5% to 8% of preschool children, often persisting into the school years.  A cross-sectional study was conducted in 208 children aged 48-59 months to determine the validity and reliability of the Indonesian edition of the Preschool Language Scale version 4 (PLS4 as a screening tool for the identification of language development disorders. Construct validity was examined by using Pearson correlation coefficient. Internal consistency was tested and repeated measurements were taken to establish the stability coefficient and intraclass correlation coefficients (ICC for test-retest reliability. For construct validity, the Pearson correlation coefficient ranged from 0.151-0.526, indicating that all questions in this instrument were valid for measuring auditory comprehension (AC and expressive communication skills (EC. Cronbach’s alpha level ranged from 0.81-0.95 with standard error of measurement (SEM ranging from 3.1-3.3. Stability coefficients ranged from 0.98-.0.99 with ICC coefficient ranging from 0.97-0.99 both of which showed an excellent reliability. This study found that PLS-4 is a valid and reliable instrument. It is easy to handle and can be recommended for assessing language development in children aged 48-59 months.

  5. Reliable RANSAC Using a Novel Preprocessing Model

    Directory of Open Access Journals (Sweden)

    Xiaoyan Wang

    2013-01-01

    Full Text Available Geometric assumption and verification with RANSAC has become a crucial step for corresponding to local features due to its wide applications in biomedical feature analysis and vision computing. However, conventional RANSAC is very time-consuming due to redundant sampling times, especially dealing with the case of numerous matching pairs. This paper presents a novel preprocessing model to explore a reduced set with reliable correspondences from initial matching dataset. Both geometric model generation and verification are carried out on this reduced set, which leads to considerable speedups. Afterwards, this paper proposes a reliable RANSAC framework using preprocessing model, which was implemented and verified using Harris and SIFT features, respectively. Compared with traditional RANSAC, experimental results show that our method is more efficient.

  6. A Newly Developed Method for Computing Reliability Measures in a Water Supply Network

    Directory of Open Access Journals (Sweden)

    Jacek Malinowski

    2016-01-01

    Full Text Available A reliability model of a water supply network has beens examined. Its main features are: a topology that can be decomposed by the so-called state factorization into a (relativelysmall number of derivative networks, each having a series-parallel structure (1, binary-state components (either operative or failed with given flow capacities (2, a multi-state character of the whole network and its sub-networks - a network state is defined as the maximal flow between a source (sources and a sink (sinks (3, all capacities (component, network, and sub-network have integer values (4. As the network operates, its state changes due to component failures, repairs, and replacements. A newly developed method of computing the inter-state transition intensities has been presented. It is based on the so-called state factorization and series-parallel aggregation. The analysis of these intensities shows that the failure-repair process of the considered system is an asymptotically homogenous Markov process. It is also demonstrated how certain reliability parameters useful for the network maintenance planning can be determined on the basis of the asymptotic intensities. For better understanding of the presented method, an illustrative example is given. (original abstract

  7. A Scale Development for 21st Century Skills of Primary School Students: A Validity and Reliability Study1

    Directory of Open Access Journals (Sweden)

    Ş. Dilek Belet Boyacı

    2016-01-01

    Full Text Available The objective of the present study is to develop a measurement tool to assess 21st Century learning and innovation skills of primary school students. Study data was collected from 632 fourth grade students in five different primary schools during 2014 – 2015 academic year and data obtained from 609 fourth grade students were utilized in the study. The scale was developed in six stages. These were; establishing the scale items, consultation of experts, pretest stage, determination of structural validity, reliability assessment, and finalization of the scale, respectively. Cronbach alpha reliability coefficient for the whole scale, which consisted of three factors, was calculated as 0.95. 0.89. As a result of the current study, a Likert-type 21st Century learning and innovation skills scale with 39 items was developed. 20 items of the scale were related to creativity and innovation skills, 12 were related to critical thinking and problem solving skills, and 7 were related to cooperation and communication skills.

  8. Development of Physical Activity-Related Parenting Practices Scales for Urban Chinese Parents of Preschoolers: Confirmatory Factor Analysis and Reliability.

    Science.gov (United States)

    Suen, Yi-Nam; Cerin, Ester; Barnett, Anthony; Huang, Wendy Y J; Mellecker, Robin R

    2017-09-01

    Valid instruments of parenting practices related to children's physical activity (PA) are essential to understand how parents affect preschoolers' PA. This study developed and validated a questionnaire of PA-related parenting practices for Chinese-speaking parents of preschoolers in Hong Kong. Parents (n = 394) completed a questionnaire developed using findings from formative qualitative research and literature searches. Test-retest reliability was determined on a subsample (n = 61). Factorial validity was assessed using confirmatory factor analysis. Subscale internal consistency was determined. The scale of parenting practices encouraging PA comprised 2 latent factors: Modeling, structure and participatory engagement in PA (23 items), and Provision of appropriate places for child's PA (4 items). The scale of parenting practices discouraging PA scale encompassed 4 latent factors: Safety concern/overprotection (6 items), Psychological/behavioral control (5 items), Promoting inactivity (4 items), and Promoting screen time (2 items). Test-retest reliabilities were moderate to excellent (0.58 to 0.82), and internal subscale reliabilities were acceptable (0.63 to 0.89). We developed a theory-based questionnaire for assessing PA-related parenting practices among Chinese-speaking parents of Hong Kong preschoolers. While some items were context and culture specific, many were similar to those previously found in other populations, indicating a degree of construct generalizability across cultures.

  9. Contribution to high voltage matrix switches reliability

    International Nuclear Information System (INIS)

    Lausenaz, Yvan

    2000-01-01

    Nowadays, power electronic equipment requirements are important, concerning performances, quality and reliability. On the other hand, costs have to be reduced in order to satisfy the market rules. To provide cheap, reliability and performances, many standard components with mass production are developed. But the construction of specific products must be considered following these two different points: in one band you can produce specific components, with delay, over-cost problems and eventuality quality and reliability problems, in the other and you can use standard components in a adapted topologies. The CEA of Pierrelatte has adopted this last technique of power electronic conception for the development of these high voltage pulsed power converters. The technique consists in using standard components and to associate them in series and in parallel. The matrix constitutes high voltage macro-switch where electrical parameters are distributed between the synchronized components. This study deals with the reliability of these structures. It brings up the high reliability aspect of MOSFETs matrix associations. Thanks to several homemade test facilities, we obtained lots of data concerning the components we use. The understanding of defects propagation mechanisms in matrix structures has allowed us to put forwards the necessity of robust drive system, adapted clamping voltage protection, and careful geometrical construction. All these reliability considerations in matrix associations have notably allowed the construction of a new matrix structure regrouping all solutions insuring reliability. Reliable and robust, this product has already reaches the industrial stage. (author) [fr

  10. Development of an International Electric Cooperative Initiative on Energy Efficiency

    Energy Technology Data Exchange (ETDEWEB)

    Paul Clark; David South

    2004-05-01

    NRECA conceived of the International Electric Cooperative Initiative on Energy Efficiency (IECIEE) in order to provide an ongoing means of contributing voluntary actions on greenhouse gas emissions mitigation as an integral component of its international programs and projects. This required designing the IECIEE to be integrated directly with the core interests and attributes of participating cooperatives in the U.S. and Latin America, which was the initial focus area selected for the IECIEE. In the case of NRECA International, the core interests related to promoting and strengthening the electric cooperative model, which has proved highly successful in maximizing operational efficiencies in electric power generation, distribution and retailing, as compared to government-owned entities. The approach involved three basic components: (i) establishing the IECIEE mechanism, which involved setting up a functioning organizational vehicle providing for investment, management, and emissions credit accounting; (ii) developing a portfolio of projects in countries where NRECA International could effectively implement the broader mandate of cooperative development as energy efficient suppliers and distributors of electrical energy; and (iii) conducting outreach to obtain the commitment of participants and resources from U.S. and Latin American cooperatives and partnering agencies in the development financing community.

  11. Development and reliability testing of the Nordic Housing Enabler – an instrument for accessibility assessment of the physical housing

    DEFF Research Database (Denmark)

    Helle, Tina

    and adapted according to accessibility norms and guidelines for housing design in Sweden, Denmark, Iceland and Finland. This iterative process involved occupational therapists, architects, building engineers and professional translators, resulting in the Nordic Housing Enabler. For reliability testing...... serious deficits when it comes to accessibility. This study addresses development of a content valid cross-Nordic version of the Housing Enabler and investigation of inter-rater reliability, when used in occupational therapy practice. The instrument was translated from the original Swedish version......, the sample strategy and data collection procedures were the same in all countries. In total, twenty voluntary occupational therapists collected data from 106 cases by means of the Nordic Housing Enabler. Inter-rater reliability was calculated by means of percentage agreement and kappa statistics. Overall...

  12. Engineering bacterial translation initiation - Do we have all the tools we need?

    Science.gov (United States)

    Vigar, Justin R J; Wieden, Hans-Joachim

    2017-11-01

    Reliable tools that allow precise and predictable control over gene expression are critical for the success of nearly all bioengineering applications. Translation initiation is the most regulated phase during protein biosynthesis, and is therefore a promising target for exerting control over gene expression. At the translational level, the copy number of a protein can be fine-tuned by altering the interaction between the translation initiation region of an mRNA and the ribosome. These interactions can be controlled by modulating the mRNA structure using numerous approaches, including small molecule ligands, RNAs, or RNA-binding proteins. A variety of naturally occurring regulatory elements have been repurposed, facilitating advances in synthetic gene regulation strategies. The pursuit of a comprehensive understanding of mechanisms governing translation initiation provides the framework for future engineering efforts. Here we outline state-of-the-art strategies used to predictably control translation initiation in bacteria. We also discuss current limitations in the field and future goals. Due to its function as the rate-determining step, initiation is the ideal point to exert effective translation regulation. Several engineering tools are currently available to rationally design the initiation characteristics of synthetic mRNAs. However, improvements are required to increase the predictability, effectiveness, and portability of these tools. Predictable and reliable control over translation initiation will allow greater predictability when designing, constructing, and testing genetic circuits. The ability to build more complex circuits predictably will advance synthetic biology and contribute to our fundamental understanding of the underlying principles of these processes. "This article is part of a Special Issue entitled "Biochemistry of Synthetic Biology - Recent Developments" Guest Editor: Dr. Ilka Heinemann and Dr. Patrick O'Donoghue. Copyright © 2017 Elsevier

  13. The Validity and Reliability Test of the Indonesian Version of Gastroesophageal Reflux Disease Quality of Life (GERD-QOL) Questionnaire.

    Science.gov (United States)

    Siahaan, Laura A; Syam, Ari F; Simadibrata, Marcellus; Setiati, Siti

    2017-01-01

    to obtain a valid and reliable GERD-QOL questionnaire for Indonesian application. at the initial stage, the GERD-QOL questionnaire was first translated into Indonesian language and the translated questionnaire was subsequently translated back into the original language (back-to-back translation). The results were evaluated by the researcher team and therefore, an Indonesian version of GERD-QOL questionnaire was developed. Ninety-one patients who had been clinically diagnosed with GERD based on the Montreal criteria were interviewed using the Indonesian version of GERD-QOL questionnaire and the SF 36 questionnaire. The validity was evaluated using a method of construct validity and external validity, and reliability can be tested by the method of internal consistency and test retest. the Indonesian version of GERD-QOL questionnaire had a good internal consistency reliability with a Cronbach Alpha of 0.687-0.842 and a good test retest reliability with an intra-class correlation coefficient of 0.756-0.936; pGERD-QOL questionnaire has been proven valid and reliable to evaluate the quality of life of GERD patients.

  14. A Reliability Based Model for Wind Turbine Selection

    Directory of Open Access Journals (Sweden)

    A.K. Rajeevan

    2013-06-01

    Full Text Available A wind turbine generator output at a specific site depends on many factors, particularly cut- in, rated and cut-out wind speed parameters. Hence power output varies from turbine to turbine. The objective of this paper is to develop a mathematical relationship between reliability and wind power generation. The analytical computation of monthly wind power is obtained from weibull statistical model using cubic mean cube root of wind speed. Reliability calculation is based on failure probability analysis. There are many different types of wind turbinescommercially available in the market. From reliability point of view, to get optimum reliability in power generation, it is desirable to select a wind turbine generator which is best suited for a site. The mathematical relationship developed in this paper can be used for site-matching turbine selection in reliability point of view.

  15. Rethinking the Reliability of Eyewitness Memory.

    Science.gov (United States)

    Wixted, John T; Mickes, Laura; Fisher, Ronald P

    2018-05-01

    Although certain pockets within the broad field of academic psychology have come to appreciate that eyewitness memory is more reliable than was once believed, the prevailing view, by far, is that eyewitness memory is unreliable-a blanket assessment that increasingly pervades the legal system. On the surface, this verdict seems unavoidable: Research convincingly shows that memory is malleable, and eyewitness misidentifications are known to have played a role in most of the DNA exonerations of the innocent. However, we argue here that, like DNA evidence and other kinds of scientifically validated forensic evidence, eyewitness memory is reliable if it is not contaminated and if proper testing procedures are used. This conclusion applies to eyewitness memory broadly conceived, whether the test involves recognition (from a police lineup) or recall (during a police interview). From this perspective, eyewitness memory has been wrongfully convicted of mistakes that are better construed as having been committed by other actors in the legal system, not by the eyewitnesses themselves. Eyewitnesses typically provide reliable evidence on an initial, uncontaminated memory test, and this is true even for most of the wrongful convictions that were later reversed by DNA evidence.

  16. Reactor fuel reliability constraints on power shape control

    International Nuclear Information System (INIS)

    Gelhaus, F.; Hallam, J.; Sauar, T.

    1977-01-01

    The level of reliability of fuel rods operating in commercial nuclear power plants has been less than desired for a number of reasons. Several of these causes have been successfully minimized, but pellet-clad interaction failures persist. Since power and power change are dominant parameters in this failure mode, restrictions on operational maneuvers have been recommended by all U. S. fuel suppliers. Slower-than-design allowable maneuvers decrease the plant capacity factor, which can cost a utility up to $7 million per year per plant. To assist utility engineering and operations personnel in their day-to-day decisions in this regard, the Electric Power Research Institute (EPRI) is initiating a project, designated RP895, to develop a fully computerized Power Shape Monitoring System (PSMS) for core-wide fuel rod reliability prediction. This paper describes the PSMS system and details some of the hardware/software requirements as they are now perceived. Salient results from a just-completed complementary EPRI-funded study, RP509, are described; this effort employed hand data acquisition and many man-machine interfaces that will be fully integrated and automated in the PSMS. The capabilities of the PSMS will derive from the use of modern minicomputer hardware and software and from accurate computational modules that enable near-real-time predictive capability

  17. Development of a reliability-analysis method for category I structures

    International Nuclear Information System (INIS)

    Shinozuka, M.; Kako, T.; Hwang, H.; Reich, M.

    1983-01-01

    The present paper develops a reliability analysis method for category I nuclear structures, particularly for reinforced concrete containment structures subjected to various load combinations. The loads considered here include dead loads, accidental internal pressure and earthquake ground acceleration. For mathematical tractability, an earthquake occurrence is assumed to be governed by the Poisson arrival law, while its acceleration history is idealized as a Gaussian vector process of finite duration. A vector process consists of three component processes, each with zero mean. The second order statistics of this process are specified by a three-by-three spectral density matrix with a multiplying factor representing the overall intensity of the ground acceleration. With respect to accidental internal pressure, the following assumptions are made: (a) it occurs in accordance with the Poisson law; (b) its intensity and duration are random; and (c) its temporal rise and fall behaviors are such that a quasi-static structural analysis applies. A dead load is considered to be a deterministic constant

  18. Reliability assessment based on subjective inferences

    International Nuclear Information System (INIS)

    Ma Zhibo; Zhu Jianshi; Xu Naixin

    2003-01-01

    The reliability information which comes from subjective analysis is often incomplete prior. This information can be generally assumed to exist in the form of either a stated prior mean of R (reliability) or a stated prior credibility interval on R. An efficient approach is developed to determine a complete beta prior distribution from the subjective information according to the principle of maximum entropy, and the the reliability of survival/failure product is assessed via Bayes theorem. Numerical examples are presented to illustrate the methods

  19. Development, Reliability, and Validity of a Child Dissociation Scale.

    Science.gov (United States)

    Putnam, Frank W.; And Others

    1993-01-01

    Evaluation of the Child Dissociative Checklist found it to be a reliable and valid observer report measure of dissociation in children, including sexually abused girls and children with dissociative disorder and with multiple personality disorder. The checklist, which is appended, is intended as a clinical screening instrument and research measure…

  20. Bringing the beneficiary closer: Explanations for volunteering time in Dutch private development initiatives

    NARCIS (Netherlands)

    Kinsbergen, S.; Tolsma, J.; Ruiter, S.

    2013-01-01

    In the Netherlands, charitable behavior for international development purposes is subject to important changes. Whereas established development organizations suffer from a declining support base, private development initiatives (PDIs) that execute concrete, small-scale projects within direct

  1. Classifier Fusion With Contextual Reliability Evaluation.

    Science.gov (United States)

    Liu, Zhunga; Pan, Quan; Dezert, Jean; Han, Jun-Wei; He, You

    2018-05-01

    Classifier fusion is an efficient strategy to improve the classification performance for the complex pattern recognition problem. In practice, the multiple classifiers to combine can have different reliabilities and the proper reliability evaluation plays an important role in the fusion process for getting the best classification performance. We propose a new method for classifier fusion with contextual reliability evaluation (CF-CRE) based on inner reliability and relative reliability concepts. The inner reliability, represented by a matrix, characterizes the probability of the object belonging to one class when it is classified to another class. The elements of this matrix are estimated from the -nearest neighbors of the object. A cautious discounting rule is developed under belief functions framework to revise the classification result according to the inner reliability. The relative reliability is evaluated based on a new incompatibility measure which allows to reduce the level of conflict between the classifiers by applying the classical evidence discounting rule to each classifier before their combination. The inner reliability and relative reliability capture different aspects of the classification reliability. The discounted classification results are combined with Dempster-Shafer's rule for the final class decision making support. The performance of CF-CRE have been evaluated and compared with those of main classical fusion methods using real data sets. The experimental results show that CF-CRE can produce substantially higher accuracy than other fusion methods in general. Moreover, CF-CRE is robust to the changes of the number of nearest neighbors chosen for estimating the reliability matrix, which is appealing for the applications.

  2. The Adolescent-Parent Career Congruence Scale: Development and Initial Validation

    Science.gov (United States)

    Sawitri, Dian R.; Creed, Peter A.; Zimmer-Gembeck, Melanie J.

    2013-01-01

    Although there is a growing interest in the discrepancy between parents and their adolescent children in relation to career expectations, there is no existing, psychometrically sound scale that directly measures adolescent-parent career congruence or incongruence. This study reports the development and initial validation of the Adolescent-Parent…

  3. Assessing Households Preparedness for Earthquakes: An Exploratory Study in the Development of a Valid and Reliable Persian-version Tool.

    Science.gov (United States)

    Ardalan, Ali; Sohrabizadeh, Sanaz

    2016-02-25

    Iran is placed among countries suffering from the highest number of earthquake casualties. Household preparedness, as one component of risk reduction efforts, is often supported in quake-prone areas. In Iran, lack of a valid and reliable household preparedness tool was reported by previous disaster studies. This study is aimed to fill this gap by developing a valid and reliable tool for assessing household preparedness in the event of an earthquake.  This survey was conducted through three phases including literature review and focus group discussions with the participation of eight key informants, validity measurements and reliability measurements. Field investigation was completed with the participation of 450 households within three provinces of Iran. Content validity, construct validity, the use of factor analysis; internal consistency using Cronbach's alpha coefficient, and test-retest reliability were carried out to develop the tool.  Based on the CVIs, ranging from 0.80 to 0.100, and exploratory factor analysis with factor loading of more than 0.5, all items were valid. The amount of Cronbach's alpha (0.7) and test-retest examination by Spearman correlations indicated that the scale was also reliable. The final instrument consisted of six categories and 18 questions including actions at the time of earthquakes, nonstructural safety, structural safety, hazard map, communications, drill, and safety skills.  Using a Persian-version tool that is adjusted to the socio-cultural determinants and native language may result in more trustful information on earthquake preparedness. It is suggested that disaster managers and researchers apply this tool in their future household preparedness projects. Further research is needed to make effective policies and plans for transforming preparedness knowledge into behavior.

  4. Reliability issues in PACS

    Science.gov (United States)

    Taira, Ricky K.; Chan, Kelby K.; Stewart, Brent K.; Weinberg, Wolfram S.

    1991-07-01

    Reliability is an increasing concern when moving PACS from the experimental laboratory to the clinical environment. Any system downtime may seriously affect patient care. The authors report on the several classes of errors encountered during the pre-clinical release of the PACS during the past several months and present the solutions implemented to handle them. The reliability issues discussed include: (1) environmental precautions, (2) database backups, (3) monitor routines of critical resources and processes, (4) hardware redundancy (networks, archives), and (5) development of a PACS quality control program.

  5. Structural Reliability of Wind Turbine Blades

    DEFF Research Database (Denmark)

    Dimitrov, Nikolay Krasimirov

    turbine blades. The main purpose is to draw a clear picture of how reliability-based design of wind turbines can be done in practice. The objectives of the thesis are to create methodologies for efficient reliability assessment of composite materials and composite wind turbine blades, and to map...... the uncertainties in the processes, materials and external conditions that have an effect on the health of a composite structure. The study considers all stages in a reliability analysis, from defining models of structural components to obtaining the reliability index and calibration of partial safety factors...... by developing new models and standards or carrying out tests The following aspects are covered in detail: ⋅ The probabilistic aspects of ultimate strength of composite laminates are addressed. Laminated plates are considered as a general structural reliability system where each layer in a laminate is a separate...

  6. Software engineering practices for control system reliability

    International Nuclear Information System (INIS)

    S. K. Schaffner; K. S White

    1999-01-01

    This paper will discuss software engineering practices used to improve Control System reliability. The authors begin with a brief discussion of the Software Engineering Institute's Capability Maturity Model (CMM) which is a framework for evaluating and improving key practices used to enhance software development and maintenance capabilities. The software engineering processes developed and used by the Controls Group at the Thomas Jefferson National Accelerator Facility (Jefferson Lab), using the Experimental Physics and Industrial Control System (EPICS) for accelerator control, are described. Examples are given of how their procedures have been used to minimized control system downtime and improve reliability. While their examples are primarily drawn from their experience with EPICS, these practices are equally applicable to any control system. Specific issues addressed include resource allocation, developing reliable software lifecycle processes and risk management

  7. Improvement of the reliability on nondestructive inspection

    International Nuclear Information System (INIS)

    Song, Sung Jin; Kim, Young H.; Lee, Hyang Beom; Shin, Young Kil; Jung, Hyun Jo; Park, Ik Keun; Park, Eun Soo

    2002-03-01

    Retaining reliabilities of nondestructive testing is essential for the life-time maintenance of Nuclear Power Plant. The nondestructive testing methods which are frequently used in the Nuclear Power Plant are eddy current testing for the inspection of steam generator tubes and ultrasonic testing for the inspection of weldments. In order to improve reliabilities of ultrasonic testing and eddy current testing, the subjects carried out in this study are as follows : development of BEM analysis technique for ECT of SG tube, development of neural network technique for the intelligent analysis of ECT flaw signals of SG tubes, development of RFECT technology for the inspection of SG tube, FEM analysis of ultrasonic scattering field, evaluation of statistical reliability of PD-RR test of ultrasonic testing and development of multi-Gaussian beam modeling technique to predict accurate signal of signal beam ultrasonic testing with the efficiency in calculation time

  8. Improvement of the reliability on nondestructive inspection

    Energy Technology Data Exchange (ETDEWEB)

    Song, Sung Jin; Kim, Young H. [Sungkyunkwan Univ., Suwon (Korea, Republic of); Lee, Hyang Beom [Soongsil Univ., Seoul (Korea, Republic of); Shin, Young Kil [Kunsan National Univ., Gunsan (Korea, Republic of); Jung, Hyun Jo [Wonkwang Univ., Iksan (Korea, Republic of); Park, Ik Keun; Park, Eun Soo [Seoul Nationl Univ., Seoul (Korea, Republic of)

    2002-03-15

    Retaining reliabilities of nondestructive testing is essential for the life-time maintenance of Nuclear Power Plant. The nondestructive testing methods which are frequently used in the Nuclear Power Plant are eddy current testing for the inspection of steam generator tubes and ultrasonic testing for the inspection of weldments. In order to improve reliabilities of ultrasonic testing and eddy current testing, the subjects carried out in this study are as follows : development of BEM analysis technique for ECT of SG tube, development of neural network technique for the intelligent analysis of ECT flaw signals of SG tubes, development of RFECT technology for the inspection of SG tube, FEM analysis of ultrasonic scattering field, evaluation of statistical reliability of PD-RR test of ultrasonic testing and development of multi-Gaussian beam modeling technique to predict accurate signal of signal beam ultrasonic testing with the efficiency in calculation time.

  9. reliability reliability

    African Journals Online (AJOL)

    eobe

    Corresponding author, Tel: +234-703. RELIABILITY .... V , , given by the code of practice. However, checks must .... an optimization procedure over the failure domain F corresponding .... of Concrete Members based on Utility Theory,. Technical ...

  10. A HUMAN RELIABILITY-CENTERED APPROACH TO THE DEVELOPMENT OF JOB AIDS FOR REVIEWERS OF MEDICAL DEVICES THAT USE RADIOLOGICAL BYPRODUCT MATERIALS

    International Nuclear Information System (INIS)

    COOPER, S.E.; BROWN, W.S.; WREATHALL, J.

    2005-01-01

    The U.S. Nuclear Regulatory Commission (NRC) is engaged in an initiative to risk-inform the regulation of byproduct materials. Operating experience indicates that human actions play a dominant role in most of the activities involving byproduct materials, which are radioactive materials other than those used in nuclear power plants or in weapons production, primarily for medical or industrial purposes. The overall risk of these activities is strongly influenced by human performance. Hence, an improved understanding of human error, its causes and contexts, and human reliability analysis (HRA) is important in risk-informing the regulation of these activities. The development of the human performance job aids was undertaken by stages, with frequent interaction with the prospective users. First, potentially risk significant human actions were identified based on reviews of available risk studies for byproduct material applications and of descriptions of events for byproduct materials applications that involved potentially significant human actions. Applications from the medical and the industrial domains were sampled. Next, the specific needs of the expected users of the human performance-related capabilities were determined. To do this, NRC headquarters and region staff were interviewed to identify the types of activities (e.g., license reviews, inspections, event assessments) that need HRA support and the form in which such support might best be offered. Because the range of byproduct uses regulated by NRC is so broad, it was decided that initial development of knowledge and tools would be undertaken in the context of a specific use of byproduct material, which was selected in consultation with NRC staff. Based on needs of NRC staff and the human performance related characteristics of the context chosen, knowledge resources were then compiled to support consideration of human performance issues related to the regulation of byproduct materials. Finally, with

  11. A HUMAN RELIABILITY-CENTERED APPROACH TO THE DEVELOPMENT OF JOB AIDS FOR REVIEWERS OF MEDICAL DEVICES THAT USE RADIOLOGICAL BYPRODUCT MATERIALS.

    Energy Technology Data Exchange (ETDEWEB)

    COOPER, S.E.; BROWN, W.S.; WREATHALL, J.

    2005-02-02

    The U.S. Nuclear Regulatory Commission (NRC) is engaged in an initiative to risk-inform the regulation of byproduct materials. Operating experience indicates that human actions play a dominant role in most of the activities involving byproduct materials, which are radioactive materials other than those used in nuclear power plants or in weapons production, primarily for medical or industrial purposes. The overall risk of these activities is strongly influenced by human performance. Hence, an improved understanding of human error, its causes and contexts, and human reliability analysis (HRA) is important in risk-informing the regulation of these activities. The development of the human performance job aids was undertaken by stages, with frequent interaction with the prospective users. First, potentially risk significant human actions were identified based on reviews of available risk studies for byproduct material applications and of descriptions of events for byproduct materials applications that involved potentially significant human actions. Applications from the medical and the industrial domains were sampled. Next, the specific needs of the expected users of the human performance-related capabilities were determined. To do this, NRC headquarters and region staff were interviewed to identify the types of activities (e.g., license reviews, inspections, event assessments) that need HRA support and the form in which such support might best be offered. Because the range of byproduct uses regulated by NRC is so broad, it was decided that initial development of knowledge and tools would be undertaken in the context of a specific use of byproduct material, which was selected in consultation with NRC staff. Based on needs of NRC staff and the human performance related characteristics of the context chosen, knowledge resources were then compiled to support consideration of human performance issues related to the regulation of byproduct materials. Finally, with

  12. Developing a statewide public health initiative to reduce infant mortality in Oklahoma.

    Science.gov (United States)

    Dooley, Suzanna; Patrick, Paul; Lincoln, Alicia; Cline, Janette

    2014-01-01

    The Preparing for a Lifetime, It's Everyone's Responsibility initiative was developed to improve the health and well- being of Oklahoma's mothers and infants. The development phase included systematic data collection, extensive data analysis, and multi-disciplinary partnership development. In total, seven issues (preconception/interconception health, tobacco use, postpartum depression, breastfeeding, infant safe sleep, preterm birth, and infant injury prevention) were identified as crucial to addressing infant mortality in Oklahoma. Workgroups were created to focus on each issue. Data and media communications workgroups were added to further partner commitment and support for policy and programmatic changes across multiple agencies and programs. Leadership support, partnership, evaluation, and celebrating small successes were important factors that lead to large scale adoption and support for the state-wide initiative to reduce infant mortality.

  13. A double-loop adaptive sampling approach for sensitivity-free dynamic reliability analysis

    International Nuclear Information System (INIS)

    Wang, Zequn; Wang, Pingfeng

    2015-01-01

    Dynamic reliability measures reliability of an engineered system considering time-variant operation condition and component deterioration. Due to high computational costs, conducting dynamic reliability analysis at an early system design stage remains challenging. This paper presents a confidence-based meta-modeling approach, referred to as double-loop adaptive sampling (DLAS), for efficient sensitivity-free dynamic reliability analysis. The DLAS builds a Gaussian process (GP) model sequentially to approximate extreme system responses over time, so that Monte Carlo simulation (MCS) can be employed directly to estimate dynamic reliability. A generic confidence measure is developed to evaluate the accuracy of dynamic reliability estimation while using the MCS approach based on developed GP models. A double-loop adaptive sampling scheme is developed to efficiently update the GP model in a sequential manner, by considering system input variables and time concurrently in two sampling loops. The model updating process using the developed sampling scheme can be terminated once the user defined confidence target is satisfied. The developed DLAS approach eliminates computationally expensive sensitivity analysis process, thus substantially improves the efficiency of dynamic reliability analysis. Three case studies are used to demonstrate the efficacy of DLAS for dynamic reliability analysis. - Highlights: • Developed a novel adaptive sampling approach for dynamic reliability analysis. • POD Developed a new metric to quantify the accuracy of dynamic reliability estimation. • Developed a new sequential sampling scheme to efficiently update surrogate models. • Three case studies were used to demonstrate the efficacy of the new approach. • Case study results showed substantially enhanced efficiency with high accuracy

  14. Measuring reliability under epistemic uncertainty: Review on non-probabilistic reliability metrics

    Directory of Open Access Journals (Sweden)

    Kang Rui

    2016-06-01

    Full Text Available In this paper, a systematic review of non-probabilistic reliability metrics is conducted to assist the selection of appropriate reliability metrics to model the influence of epistemic uncertainty. Five frequently used non-probabilistic reliability metrics are critically reviewed, i.e., evidence-theory-based reliability metrics, interval-analysis-based reliability metrics, fuzzy-interval-analysis-based reliability metrics, possibility-theory-based reliability metrics (posbist reliability and uncertainty-theory-based reliability metrics (belief reliability. It is pointed out that a qualified reliability metric that is able to consider the effect of epistemic uncertainty needs to (1 compensate the conservatism in the estimations of the component-level reliability metrics caused by epistemic uncertainty, and (2 satisfy the duality axiom, otherwise it might lead to paradoxical and confusing results in engineering applications. The five commonly used non-probabilistic reliability metrics are compared in terms of these two properties, and the comparison can serve as a basis for the selection of the appropriate reliability metrics.

  15. Design of Bus Protocol Intelligent Initiation System Based On RS485

    Directory of Open Access Journals (Sweden)

    Li Liming

    2017-01-01

    Full Text Available In order to design an effective and reliable RS485 bus protocol based on RS485 bus, this paper introduces the structure and transmission mode of the command frame and the response frame, and also introduce four control measures and the communication in order to process quality of this system. The communication protocol is open, tolerant, reliable and fast, and can realize ignition more reliable and accurate in the intelligent initiation system.

  16. Chaos and reliability in balanced spiking networks with temporal drive.

    Science.gov (United States)

    Lajoie, Guillaume; Lin, Kevin K; Shea-Brown, Eric

    2013-05-01

    Biological information processing is often carried out by complex networks of interconnected dynamical units. A basic question about such networks is that of reliability: If the same signal is presented many times with the network in different initial states, will the system entrain to the signal in a repeatable way? Reliability is of particular interest in neuroscience, where large, complex networks of excitatory and inhibitory cells are ubiquitous. These networks are known to autonomously produce strongly chaotic dynamics-an obvious threat to reliability. Here, we show that such chaos persists in the presence of weak and strong stimuli, but that even in the presence of chaos, intermittent periods of highly reliable spiking often coexist with unreliable activity. We elucidate the local dynamical mechanisms involved in this intermittent reliability, and investigate the relationship between this phenomenon and certain time-dependent attractors arising from the dynamics. A conclusion is that chaotic dynamics do not have to be an obstacle to precise spike responses, a fact with implications for signal coding in large networks.

  17. Children's Physical Activity While Gardening: Development of a Valid and Reliable Direct Observation Tool.

    Science.gov (United States)

    Myers, Beth M; Wells, Nancy M

    2015-04-01

    Gardens are a promising intervention to promote physical activity (PA) and foster health. However, because of the unique characteristics of gardening, no extant tool can capture PA, postures, and motions that take place in a garden. The Physical Activity Research and Assessment tool for Garden Observation (PARAGON) was developed to assess children's PA levels, tasks, postures, and motions, associations, and interactions while gardening. PARAGON uses momentary time sampling in which a trained observer watches a focal child for 15 seconds and then records behavior for 15 seconds. Sixty-five children (38 girls, 27 boys) at 4 elementary schools in New York State were observed over 8 days. During the observation, children simultaneously wore Actigraph GT3X+ accelerometers. The overall interrater reliability was 88% agreement, and Ebel was .97. Percent agreement values for activity level (93%), garden tasks (93%), motions (80%), associations (95%), and interactions (91%) also met acceptable criteria. Validity was established by previously validated PA codes and by expected convergent validity with accelerometry. PARAGON is a valid and reliable observation tool for assessing children's PA in the context of gardening.

  18. Collection and classification of human error and human reliability data from Indian nuclear power plants for use in PSA

    International Nuclear Information System (INIS)

    Subramaniam, K.; Saraf, R.K.; Sanyasi Rao, V.V.S.; Venkat Raj, V.; Venkatraman, R.

    2000-01-01

    Complex systems such as NPPs involve a large number of Human Interactions (HIs) in every phase of plant operations. Human Reliability Analysis (HRA) in the context of a PSA, attempts to model the HIs and evaluate/predict their impact on safety and reliability using human error/human reliability data. A large number of HRA techniques have been developed for modelling and integrating HIs into PSA but there is a significant lack of HAR data. In the face of insufficient data, human reliability analysts have had to resort to expert judgement methods in order to extend the insufficient data sets. In this situation, the generation of data from plant operating experience assumes importance. The development of a HRA data bank for Indian nuclear power plants was therefore initiated as part of the programme of work on HRA. Later, with the establishment of the coordinated research programme (CRP) on collection of human reliability data and use in PSA by IAEA in 1994-95, the development was carried out under the aegis of the IAEA research contract No. 8239/RB. The work described in this report covers the activities of development of a data taxonomy and a human error reporting form (HERF) based on it, data structuring, review and analysis of plant event reports, collection of data on human errors, analysis of the data and calculation of human error probabilities (HEPs). Analysis of plant operating experience does yield a good amount of qualitative data but obtaining quantitative data on human reliability in the form of HEPs is seen to be more difficult. The difficulties have been highlighted and some ways to bring about improvements in the data situation have been discussed. The implementation of a data system for HRA is described and useful features that can be incorporated in future systems are also discussed. (author)

  19. Development and interrater reliability testing of a telephone interview training programme for Australian nurse interviewers.

    Science.gov (United States)

    Ahern, Tracey; Gardner, Anne; Gardner, Glenn; Middleton, Sandy; Della, Phillip

    2013-05-01

    The final phase of a three phase study analysing the implementation and impact of the nurse practitioner role in Australia (the Australian Nurse Practitioner Project or AUSPRAC) was undertaken in 2009, requiring nurse telephone interviewers to gather information about health outcomes directly from patients and their treating nurse practitioners. A team of several registered nurses was recruited and trained as telephone interviewers. The aim of this paper is to report on development and evaluation of the training process for telephone interviewers. The training process involved planning the content and methods to be used in the training session; delivering the session; testing skills and understanding of interviewers post-training; collecting and analysing data to determine the degree to which the training process was successful in meeting objectives and post-training follow-up. All aspects of the training process were informed by established educational principles. Interrater reliability between interviewers was high for well-validated sections of the survey instrument resulting in 100% agreement between interviewers. Other sections with unvalidated questions showed lower agreement (between 75% and 90%). Overall the agreement between interviewers was 92%. Each interviewer was also measured against a specifically developed master script or gold standard and for this each interviewer achieved a percentage of correct answers of 94.7% or better. This equated to a Kappa value of 0.92 or better. The telephone interviewer training process was very effective and achieved high interrater reliability. We argue that the high reliability was due to the use of well validated instruments and the carefully planned programme based on established educational principles. There is limited published literature on how to successfully operationalise educational principles and tailor them for specific research studies; this report addresses this knowledge gap. Copyright © 2012 Elsevier

  20. Development and preliminary reliability of a multitasking assessment for executive functioning after concussion.

    Science.gov (United States)

    Smith, Laurel B; Radomski, Mary Vining; Davidson, Leslie Freeman; Finkelstein, Marsha; Weightman, Margaret M; McCulloch, Karen L; Scherer, Matthew R

    2014-01-01

    OBJECTIVES. Executive functioning deficits may result from concussion. The Charge of Quarters (CQ) Duty Task is a multitask assessment designed to assess executive functioning in servicemembers after concussion. In this article, we discuss the rationale and process used in the development of the CQ Duty Task and present pilot data from the preliminary evaluation of interrater reliability (IRR). METHOD. Three evaluators observed as 12 healthy participants performed the CQ Duty Task and measured performance using various metrics. Intraclass correlation coefficient (ICC) quantified IRR. RESULTS. The ICC for task completion was .94. ICCs for other assessment metrics were variable. CONCLUSION. Preliminary IRR data for the CQ Duty Task are encouraging, but further investigation is needed to improve IRR in some domains. Lessons learned in the development of the CQ Duty Task could benefit future test development efforts with populations other than the military. Copyright © 2014 by the American Occupational Therapy Association, Inc.