WorldWideScience

Sample records for relevant physical parameters

  1. The estimation of effective doses using measurement of several relevant physical parameters from radon exposures

    International Nuclear Information System (INIS)

    Ridzikova, A; Fronka, A.; Maly, B.; Moucka, L.

    2003-01-01

    In the present investigation, we will be study the dose relevant factors from continual monitoring in real homes into account getting more accurate estimation of 222 Rn the effective dose. The dose relevant parameters include the radon concentration, the equilibrium factor (f), the fraction (fp) of unattached radon decay products and real time occupancy people in home. The result of the measurement are the time courses of radon concentration that are based on estimation effective doses together with assessment of the real time occupancy people indoor. We found out by analysis that year effective dose is lower than effective dose estimated by ICRP recommendation from the integral measurement that included only average radon concentration. Our analysis of estimation effective doses using measurement of several physical parameters was made only in one case and for the better specification is important to measure in different real occupancy houses. (authors)

  2. Method for extracting relevant electrical parameters from graphene field-effect transistors using a physical model

    International Nuclear Information System (INIS)

    Boscá, A.; Pedrós, J.; Martínez, J.; Calle, F.

    2015-01-01

    Due to its intrinsic high mobility, graphene has proved to be a suitable material for high-speed electronics, where graphene field-effect transistor (GFET) has shown excellent properties. In this work, we present a method for extracting relevant electrical parameters from GFET devices using a simple electrical characterization and a model fitting. With experimental data from the device output characteristics, the method allows to calculate parameters such as the mobility, the contact resistance, and the fixed charge. Differentiated electron and hole mobilities and direct connection with intrinsic material properties are some of the key aspects of this method. Moreover, the method output values can be correlated with several issues during key fabrication steps such as the graphene growth and transfer, the lithographic steps, or the metalization processes, providing a flexible tool for quality control in GFET fabrication, as well as a valuable feedback for improving the material-growth process

  3. Method for extracting relevant electrical parameters from graphene field-effect transistors using a physical model

    Energy Technology Data Exchange (ETDEWEB)

    Boscá, A., E-mail: alberto.bosca@upm.es [Instituto de Sistemas Optoelectrónicos y Microtecnología, Universidad Politécnica de Madrid, Madrid 28040 (Spain); Dpto. de Ingeniería Electrónica, E.T.S.I. de Telecomunicación, Universidad Politécnica de Madrid, Madrid 28040 (Spain); Pedrós, J. [Instituto de Sistemas Optoelectrónicos y Microtecnología, Universidad Politécnica de Madrid, Madrid 28040 (Spain); Campus de Excelencia Internacional, Campus Moncloa UCM-UPM, Madrid 28040 (Spain); Martínez, J. [Instituto de Sistemas Optoelectrónicos y Microtecnología, Universidad Politécnica de Madrid, Madrid 28040 (Spain); Dpto. de Ciencia de Materiales, E.T.S.I de Caminos, Canales y Puertos, Universidad Politécnica de Madrid, Madrid 28040 (Spain); Calle, F. [Instituto de Sistemas Optoelectrónicos y Microtecnología, Universidad Politécnica de Madrid, Madrid 28040 (Spain); Dpto. de Ingeniería Electrónica, E.T.S.I. de Telecomunicación, Universidad Politécnica de Madrid, Madrid 28040 (Spain); Campus de Excelencia Internacional, Campus Moncloa UCM-UPM, Madrid 28040 (Spain)

    2015-01-28

    Due to its intrinsic high mobility, graphene has proved to be a suitable material for high-speed electronics, where graphene field-effect transistor (GFET) has shown excellent properties. In this work, we present a method for extracting relevant electrical parameters from GFET devices using a simple electrical characterization and a model fitting. With experimental data from the device output characteristics, the method allows to calculate parameters such as the mobility, the contact resistance, and the fixed charge. Differentiated electron and hole mobilities and direct connection with intrinsic material properties are some of the key aspects of this method. Moreover, the method output values can be correlated with several issues during key fabrication steps such as the graphene growth and transfer, the lithographic steps, or the metalization processes, providing a flexible tool for quality control in GFET fabrication, as well as a valuable feedback for improving the material-growth process.

  4. The study of influence of relevant physical parameters variations on the estimates of the effective doses of Rn-222

    International Nuclear Information System (INIS)

    Ridzikova, A.; Fronka, A.; Moucka, L.

    2004-01-01

    Based on the analysis of 12 weekly continuous measurements and 4 integral measurements performed in different seasons in actual apartment rooms, bedrooms in particular, we attempted to identify the uncertainties that are involved in the estimation of radiation doses to lung tissues. We found that the parameters of time of residence, concentration, and equilibrium factor can affect substantially the estimate of the overall early effective dose. The weekly averaged concentration measured in one term is not sufficient for a fairly accurate estimate; actually, the equilibrium factor f must also be known and the actual real individual time of residence must be estimated if we want to adopt this approach to the dose estimation

  5. Quantization of physical parameters

    International Nuclear Information System (INIS)

    Jackiw, R.; Massachusetts Inst. of Tech., Cambridge; Massachusetts Inst. of Tech., Cambridge

    1984-01-01

    Dynamical models are described with parameters (mass, coupling strengths) which must be quantized for quantum mechanical consistency. These and related topological ideas have physical application to phenomenological descriptions of high temperature and low energy quantum chromodynamics, to the nonrelativistic dynamics of magnetic monopoles, and to the quantum Hall effect. (author)

  6. The Relevance of Nuclear Physics

    International Nuclear Information System (INIS)

    Weisskopf, V.F.

    1969-01-01

    I am asked what nuclear physics is about, that is, nuclear physics as distinct from particle physics and other parts of physics. I see three trends in this science. One is the discovery of new phenomena, phenomena of nature which we have not seen or observed, of which we did not know anything before. The second trend, I would say, is towards the solution of fundamental problems, the answers to certain basic questions in physics; I shall give some details later on. The third is the construction of new concepts in physics necessary to deal with the problems not only in nuclear physics but also in the rest of physics. The order of these three items is unimportant. This meeting should be concerned not only with the factual questions of science, but also with the, let me say, philosophic and practical questions of nuclear physics. Why do we do nuclear physics, what is the sense of it, what is the meaning of it and, most importantly, how can we defend the support of nuclear physics, how can we convince the governments to spend money on such a thing, which to a certain extent is our pleasure? And so we will have to be quite clear among ourselves that this is a very important matter

  7. Relevance of physics to the pharmacy major.

    Science.gov (United States)

    McCall, Richard P

    2007-08-15

    To offer a physics course that is relevant to pharmacy students, yet still contains many of the fundamental principles of physics. The course was modified over a period of several years to include activities and examples that were related to other courses in the curriculum. Course evaluations were given to assess student attitudes about the importance of physics in the pharmacy curriculum. Students' attitudes have changed over time to appreciate the role that physics plays in their studies. Students gained confidence in their ability to learn in other courses.

  8. The Relevant Physical Trace in Criminal Investigation

    Directory of Open Access Journals (Sweden)

    Durdica Hazard

    2016-01-01

    Full Text Available A criminal investigation requires the forensic scientist to search and to interpret vestiges of a criminal act that happened in the past. The forensic scientist is one of the many stakeholders who take part in the information quest within the criminal justice system. She reads the investigation scene in search of physical traces that should enable her to tell the story of the offense/crime that allegedly occurred. The challenge for any investigator is to detect and recognize relevant physical traces in order to provide clues for investigation and intelligence purposes, and that will constitute sound and relevant evidence for the court. This article shows how important it is to consider the relevancy of physical traces from the beginning of the investigation and what might influence the evaluation process. The exchange and management of information between the investigation stakeholders are important. Relevancy is a dimension that needs to be understood from the standpoints of law enforcement personnel and forensic scientists with the aim of strengthening investigation and ultimately the overall judicial process.

  9. Nanostructure symmetry: Relevance for physics and computing

    International Nuclear Information System (INIS)

    Dupertuis, Marc-André; Oberli, D. Y.; Karlsson, K. F.; Dalessi, S.; Gallinet, B.; Svendsen, G.

    2014-01-01

    We review the research done in recent years in our group on the effects of nanostructure symmetry, and outline its relevance both for nanostructure physics and for computations of their electronic and optical properties. The exemples of C3v and C2v quantum dots are used. A number of surprises and non-trivial aspects are outlined, and a few symmetry-based tools for computing and analysis are shortly presented

  10. Nanostructure symmetry: Relevance for physics and computing

    Energy Technology Data Exchange (ETDEWEB)

    Dupertuis, Marc-André; Oberli, D. Y. [Laboratory for Physics of Nanostructure, EPF Lausanne (Switzerland); Karlsson, K. F. [Department of Physics, Chemistry, and Biology (IFM), Linköping University (Sweden); Dalessi, S. [Computational Biology Group, Department of Medical Genetics, University of Lausanne (Switzerland); Gallinet, B. [Nanophotonics and Metrology Laboratory, EPF Lausanne (Switzerland); Svendsen, G. [Dept. of Electronics and Telecom., Norwegian University of Science and Technology, Trondheim (Norway)

    2014-03-31

    We review the research done in recent years in our group on the effects of nanostructure symmetry, and outline its relevance both for nanostructure physics and for computations of their electronic and optical properties. The exemples of C3v and C2v quantum dots are used. A number of surprises and non-trivial aspects are outlined, and a few symmetry-based tools for computing and analysis are shortly presented.

  11. Other relevant papers in physical oceanography

    International Nuclear Information System (INIS)

    Nyffeler, F.

    1989-01-01

    During the past few years, significant progress has occurred in the field of physical oceanography partly as a consequence of developing cooperation and international participation in well-coordinated ocean research programmes. Although these programs were not designed specifically to address CRESP problems, many have proved to be directly relevant to CRESP objectives. For example, MODE, POLYMODE, and Tourbillon were intensive site-specific experiments that included studies of dispersion processes throughout the water column. NOAMP and GME were also site specific, involved the entire water column, and even stressed near-bottom and suspended-sediment processes. Others, (e.g., WOCE) are larger in scope and include extensive observations of the general circulation of entire ocean basins. As a whole, they contribute immensely to improving the data base for exchange and transport processes and thereby for the verification and validation of both regional-scale and general-circulation ocean models. That, in turn, is directly relevant to radiological assessments. Selected papers deriving from experiments such as these are discussed and referenced below

  12. Safe structural food bolus in elderly: the relevant parameters

    OpenAIRE

    Vandenberghe-Descamps, Mathilde; Septier, Chantal; Prot, Aurélie; Tournier, Carole; Hennequin, Martine; Vigneau, Evelyne; Feron, Gilles; Labouré, Hélène

    2017-01-01

    Mastication is essential to prepare food into a bolus ready to be swallowed safely, with no choking risk. Based on food bolus properties, a masticatory normative indicator was developed by Woda et al. (2010) to identify impaired masticatory function within good oral health population. The aim of the present study was to identify relevant parameters of bolus' structure to differentiate safe to unsafe bolus among elderly contrasting by their dental status.93 elderly, 58% with at least 7 posteri...

  13. Is QCD relevant to nuclear physics

    International Nuclear Information System (INIS)

    Thomas, A.W.

    1985-01-01

    A review is given of recent work on baryon structure in a number of QCD-motivated models. After establishing a prima facie case that the quark model should be relevant in a consistent description of the nucleus over a wide range of momentum transfer, the author looks for experimental confirmation. The discussion includes the search for exotic states, for a six quark component of the deuteron, and an up to date report on the interpretation of the EMC effect. (Auth.)

  14. Physics parameter space of tokamak ignition devices

    International Nuclear Information System (INIS)

    Selcow, E.C.; Peng, Y.K.M.; Uckan, N.A.; Houlberg, W.A.

    1985-01-01

    This paper describes the results of a study to explore the physics parameter space of tokamak ignition experiments. A new physics systems code has been developed to perform the study. This code performs a global plasma analysis using steady-state, two-fluid, energy-transport models. In this paper, we discuss the models used in the code and their application to the analysis of compact ignition experiments. 8 refs., 8 figs., 1 tab

  15. Developments in entanglement theory and applications to relevant physical systems

    OpenAIRE

    Lamata Manuel, Lucas

    2007-01-01

    This Thesis is devoted to the analysis of entanglement in relevant physical systems. Entanglement is the conducting theme of this research, though I do not dedicate to a single topic, but consider a wide scope of physical situations. I have followed mainly three lines of research for this Thesis, with a series of different works each, which are, Entanglement and Relativistic Quantum Theory, Continuous-variable entanglement, and Multipartite entanglement.

  16. Image quality - physical and diagnostic parameters. The radiologist's viewpoint

    International Nuclear Information System (INIS)

    Stender, H.St.

    1985-01-01

    The quality of a radiograph is determined by the diagnostic information it provides. This depends upon the visual detection of diagnostically relevant structures. The technical radiographic requirements are dependent upon the physical measurements and the physiological and optical conditions. Such physical factors as spatial resolution, contrast and noise are quantitative measurements, which must be oriented to the qualitative visual characteristics of the radiograph. The influence of subjective perception and complexity of structural noise on the detectability of details and structures particularly demands attention. Since radiographic quality depends upon the detection of diagnostically relevant structure and features, it is important to define these parameters on the basis of extensive radiographic analysis and the corresponding clinical findings. The diagnostically relevant radiographic parameters and image details and critical structures have been worked out for the examination of the lungs, colon, stomach, urinary tract and skeleton. Good image quality requires coordination of the physical-technical parameters with the visual ability of the observer, since only in this way can the diagnostic information be represented with sufficient clarity. (author)

  17. Using ANFIS for selection of more relevant parameters to predict dew point temperature

    International Nuclear Information System (INIS)

    Mohammadi, Kasra; Shamshirband, Shahaboddin; Petković, Dalibor; Yee, Por Lip; Mansor, Zulkefli

    2016-01-01

    Highlights: • ANFIS is used to select the most relevant variables for dew point temperature prediction. • Two cities from the central and south central parts of Iran are selected as case studies. • Influence of 5 parameters on dew point temperature is evaluated. • Appropriate selection of input variables has a notable effect on prediction. • Considering the most relevant combination of 2 parameters would be more suitable. - Abstract: In this research work, for the first time, the adaptive neuro fuzzy inference system (ANFIS) is employed to propose an approach for identifying the most significant parameters for prediction of daily dew point temperature (T_d_e_w). The ANFIS process for variable selection is implemented, which includes a number of ways to recognize the parameters offering favorable predictions. According to the physical factors influencing the dew formation, 8 variables of daily minimum, maximum and average air temperatures (T_m_i_n, T_m_a_x and T_a_v_g), relative humidity (R_h), atmospheric pressure (P), water vapor pressure (V_P), sunshine hour (n) and horizontal global solar radiation (H) are considered to investigate their effects on T_d_e_w. The used data include 7 years daily measured data of two Iranian cities located in the central and south central parts of the country. The results indicate that despite climate difference between the considered case studies, for both stations, V_P is the most influential variable while R_h is the least relevant element. Furthermore, the combination of T_m_i_n and V_P is recognized as the most influential set to predict T_d_e_w. The conducted examinations show that there is a remarkable difference between the errors achieved for most and less relevant input parameters, which highlights the importance of appropriate selection of input parameters. The use of more than two inputs may not be advisable and appropriate; thus, considering the most relevant combination of 2 parameters would be more suitable

  18. The Teaching Effectiveness of a Relevant Physics Course

    Science.gov (United States)

    Hobson, Art

    1998-04-01

    If America is to achieve the science literacy that is ssential to industrialized democracy, all students must study such topics as scientific methodology, pseudoscience, critical thinking, ozone depletion, technological risk, and global warming. My large-enrollment liberal-arts physics course covers the great principles of physics along with several such philosophical and societal topics. Students find these topics relevant and fascinating, leading to strong course evaluations and large enrollments by non-scientists even in courses labeled physics. I will describe this course and present some evidence indicating that the course is effective in communicating physics and its interdisciplinary connections. A textbook, Physics: Concepts and Connections (Prentice Hall, 1995, 2nd edition to appear in June 1998), is available.

  19. Electroconvulsive Therapy In Neuropsychiatry : Relevance Of Seizure Parameters

    Directory of Open Access Journals (Sweden)

    Gangadhar BN

    2000-01-01

    Full Text Available Electroconvulsive therapy (ECT is used to induce therapeutic seizures in various clinical conditions. It is specifically useful in depression, catatonia, patients with high suicidal risk, and those intolerant to drugs. Its beneficial effects surpass its side effects. Memory impairment is benign and transient. Its mechanism of action is unknown, though numerous neurotransmitters and neuroreceptors have been implicated. The standards of ECT practice are well established but still evolving in some particularly in unilateral ECT. Assessment of threshold by formula method may deliver higher stimulus dose compared with titration method. Cerebral seizure during ECT procedure is necessary. Motor (cuff method and EEG seizure monitoring are mandatory. Recent studies have shown some EEG parameters (amplitude, fractal dimension, symmetry, and post ictal suppression to be associated with therapeutic outcome. Besides seizure monitoring, measuring other physiological parameters such as heart rate (HR and blood pressure (BP may be useful indicators of therapeutic response. Use of ECT in neurological conditions as well as its application in psychiatric illnesses associated with neurological disorders has also been reviewed briefly.

  20. Study of relevant parameters of GEM-based detectors

    CERN Document Server

    Croci, Gabriele; Sauli, Fabio; Ragazzi, S

    2007-01-01

    The Gas Electron Multiplier consist of a thin Kapton insulating (50 $\\mu$m) foil copper-clad on both sides and perforated by a high density, regular matrix of holes (around 100 per square millimeter). Typically the distance between holes (pitch) is 140 $\\mu$m and diameters of about 70 $\\mu$m. The mesh is realised by conventional photolitographic methods as used for the fabrication of multi-layer board. Upon application of a potential difference between the GEM electrodes, a high dipole field develops in the holes focusing the field lines between the drift electrode and the readout element. Electron drift along the channel and the charge is amplified by a factor that depends on the field density and the length of the channel. Owing to their excellent position resolution and rate capability GEM-based detector are very suitable to be used in different applications: from the high energy physics to the medical field. The GEM temporal and rate gain stability was studied and it was discovered that the gain variation...

  1. [Influence of reverse osmosis concentrate on physicochemical parameters of Sini decoction material system and their relevance].

    Science.gov (United States)

    Jin, Tang-Hui; Zhang, Liu-Hong; Zhu, Hua-Xu; Guo, Li-Wei; Li, Bo; Lu, Ming-Ming

    2014-04-01

    By studying the process of reverse osmosis system for traditional Chinese medicine materials physicochemical parameters affecting the osmotic pressure of its relevance, new compound system reverse osmosis process design methods were explored. Three concentrations materials for high, middle and low were dubbed with Sini decoction as a model drug, and pretreated by 50 thousand relative molecular weight cut-off ultrafiltration membrane. The viscosity, turbidity, conductivity, salinity, TDS, pH value and osmotic pressure of each sample were determined after the reverse osmosis to study the physical and chemical parameters between their respective correlations with the osmotic pressure, and characterized by HPLC chromatograms showing changes before and after the main chemical composition of samples of reverse osmosis. Conductivity-osmotic pressure, salinity-osmotic pressure of the linear correlation coefficient, TDS-osmotic pressure between the three sets of parameters were 0.963 8, 0.932 7, 0.973 7, respectively. Reverse osmosis concentrate and its characteristic spectrum ultrafiltrate HPLC similarity were up to 0. 968 or more, except the low concentrations. There is a significant correlation between the three physicochemical parameters (conductivity, salinity, TDS) and osmotic pressure of each sample system, and there is also significant linear correlation between salinity, conductivity, TDS. The original chemical composition of Sini decoction material concentrate was completely remained after the process of reverse osmosis.

  2. Application of all relevant feature selection for failure analysis of parameter-induced simulation crashes in climate models

    Science.gov (United States)

    Paja, W.; Wrzesień, M.; Niemiec, R.; Rudnicki, W. R.

    2015-07-01

    The climate models are extremely complex pieces of software. They reflect best knowledge on physical components of the climate, nevertheless, they contain several parameters, which are too weakly constrained by observations, and can potentially lead to a crash of simulation. Recently a study by Lucas et al. (2013) has shown that machine learning methods can be used for predicting which combinations of parameters can lead to crash of simulation, and hence which processes described by these parameters need refined analyses. In the current study we reanalyse the dataset used in this research using different methodology. We confirm the main conclusion of the original study concerning suitability of machine learning for prediction of crashes. We show, that only three of the eight parameters indicated in the original study as relevant for prediction of the crash are indeed strongly relevant, three other are relevant but redundant, and two are not relevant at all. We also show that the variance due to split of data between training and validation sets has large influence both on accuracy of predictions and relative importance of variables, hence only cross-validated approach can deliver robust prediction of performance and relevance of variables.

  3. Application of all-relevant feature selection for the failure analysis of parameter-induced simulation crashes in climate models

    Science.gov (United States)

    Paja, Wiesław; Wrzesien, Mariusz; Niemiec, Rafał; Rudnicki, Witold R.

    2016-03-01

    Climate models are extremely complex pieces of software. They reflect the best knowledge on the physical components of the climate; nevertheless, they contain several parameters, which are too weakly constrained by observations, and can potentially lead to a simulation crashing. Recently a study by Lucas et al. (2013) has shown that machine learning methods can be used for predicting which combinations of parameters can lead to the simulation crashing and hence which processes described by these parameters need refined analyses. In the current study we reanalyse the data set used in this research using different methodology. We confirm the main conclusion of the original study concerning the suitability of machine learning for the prediction of crashes. We show that only three of the eight parameters indicated in the original study as relevant for prediction of the crash are indeed strongly relevant, three others are relevant but redundant and two are not relevant at all. We also show that the variance due to the split of data between training and validation sets has a large influence both on the accuracy of predictions and on the relative importance of variables; hence only a cross-validated approach can deliver a robust prediction of performance and relevance of variables.

  4. Determination of the TLD-100 physical parameters

    International Nuclear Information System (INIS)

    Paucar J, J.; Picon C, C.

    1998-01-01

    This study was realized in the Physics service at the Radiotherapy Department of the National Institute of Neoplasic Diseases in Lima, Peru, it was determined the activation energy, the kinetic order and the frequency factor of the fifth peak of the TLD-100 thermoluminescent spectra using different algorithms. This was carried out in parallel with the implementation and design of a software and an interface associated with the Tl lecturer which allows a semiautomatic control for a thermoluminescent lecturer process. (Author)

  5. Ethnolinguistically Relevant Pedagogy: Empowering English Language Learners in Physical Education

    Science.gov (United States)

    Burden, Joe W., Jr.; Columna, Luis; Hodge, Samuel R.; Mansilla, Patricia Martinez de la Vega

    2013-01-01

    People from diverse cultures interpret languages and gestures differently (Columna & Lieberman, 2011). It is not surprising, therefore, that communication differences may have negative implications for teachers and English language learners in K-12 physical education environments. To address this issue, we advocate preparing physical education…

  6. On the physical relevance of the discrete Fourier transform

    CSIR Research Space (South Africa)

    Greben, JM

    1991-11-01

    Full Text Available This paper originated from the author's dissatisfaction with the way the discrete Fourier transform is usually presented in the literature. Although mathematically correct, the physical meaning of the common representation is unsatisfactory...

  7. Edge Plasma Physics and Relevant Diagnostics on the CASTOR tokamak

    Czech Academy of Sciences Publication Activity Database

    Stöckel, Jan; Devynck, P.; Gunn, J.; Martines, E.; Bonhomme, G.; Van Oost, G.; Hron, Martin; Ďuran, Ivan; Pánek, Radomír; Stejskal, Pavel; Adámek, Jiří

    2004-01-01

    Roč. 3, - (2004), s. 1-6 ISSN 1433-5581. [First Cairo Conference on Plasma Physics & Applications. Cairo, 11.10.2003-15.10.2003] R&D Projects: GA ČR GA202/03/0786; GA ČR GP202/03/P062 Keywords : tokamak * edge plasma * probe diagnostics * biasing * turbulence * polarization Subject RIV: BL - Plasma and Gas Discharge Physics

  8. The Relevance of Heavy Flavour Physics in the LHC Era

    CERN Multimedia

    CERN. Geneva; Mangano, Michelangelo L; Alvarez-Gaumé, Luís

    2005-01-01

    Experimental high energy physics is poised to break out of the prison of the Standard Model. When the field turns to the exploration of exciting new phenomena beyond the Standard Model, will there still be a role for the study of old-fashioned heavy quarks and leptons?

  9. Acceleration parameters for fluid physics with accelerating bodies

    CSIR Research Space (South Africa)

    Gledhill, Irvy MA

    2016-06-01

    Full Text Available to an acceleration parameter that appears to be new in fluid physics, but is known in cosmology. A selection of cases for rectilinear acceleration has been chosen to illustrate the point that this parameter alone does not govern regimes of flow about significantly...

  10. Measurements at LHC and their relevance for cosmic ray physics

    CERN Multimedia

    CERN. Geneva

    2016-01-01

    Many LHC measurements are already used to improve hadronic interaction models used in cosmic ray analyses. This already had a positive effect on the model dependence of crucial data analyses. Some of the data and the model tuning is reviewed. However, the LHC still has a lot more potential to provide crucial information. Since the start of Run2 the highest accelerator beam energies are reached and no further increase can be expected for a long time. First data of Run2 are published and the fundamental performance of cosmic ray hadronic interaction models can be scrutinized. The relevance of LHC data in general for cosmic ray data analyses is demonstrated.

  11. Recent results relevant to ignition physics and machine design issues

    International Nuclear Information System (INIS)

    Coppi, B.; Airoldi, A.; Bombarda, F.

    2001-01-01

    The plasma regimes under which ignition can be achieved involve a characteristic range of parameters and issues on which information has been provided by recent experiments. In particular, these results have motivated a new, in-depth analysis of the expected performance of the Ignitor machine as well as of the plasma processes that it can investigate. The main results and recent advances in the design of key systems of the machine are reported. (author)

  12. Recent results relevant to ignition physics and machine design issues

    International Nuclear Information System (INIS)

    Coppi, B.; Airoldi, A.; Bombarda, F.

    1999-01-01

    The plasma regimes under which ignition can be achieved involve a characteristic range of parameters and issues on which information has been provided by recent experiments. In particular, these results have motivated a new, in-depth analysis of the expected performance of the Ignitor machine as well as of the plasma processes that it can investigate. The main results and recent advances in the design of key systems of the machine are reported. (author)

  13. Learning about physical parameters: the importance of model discrepancy

    International Nuclear Information System (INIS)

    Brynjarsdóttir, Jenný; O'Hagan, Anthony

    2014-01-01

    Science-based simulation models are widely used to predict the behavior of complex physical systems. It is also common to use observations of the physical system to solve the inverse problem, that is, to learn about the values of parameters within the model, a process which is often called calibration. The main goal of calibration is usually to improve the predictive performance of the simulator but the values of the parameters in the model may also be of intrinsic scientific interest in their own right. In order to make appropriate use of observations of the physical system it is important to recognize model discrepancy, the difference between reality and the simulator output. We illustrate through a simple example that an analysis that does not account for model discrepancy may lead to biased and over-confident parameter estimates and predictions. The challenge with incorporating model discrepancy in statistical inverse problems is being confounded with calibration parameters, which will only be resolved with meaningful priors. For our simple example, we model the model-discrepancy via a Gaussian process and demonstrate that through accounting for model discrepancy our prediction within the range of data is correct. However, only with realistic priors on the model discrepancy do we uncover the true parameter values. Through theoretical arguments we show that these findings are typical of the general problem of learning about physical parameters and the underlying physical system using science-based mechanistic models. (paper)

  14. Safety analysis methodology with assessment of the impact of the prediction errors of relevant parameters

    International Nuclear Information System (INIS)

    Galia, A.V.

    2011-01-01

    The best estimate plus uncertainty approach (BEAU) requires the use of extensive resources and therefore it is usually applied for cases in which the available safety margin obtained with a conservative methodology can be questioned. Outside the BEAU methodology, there is not a clear approach on how to deal with the issue of considering the uncertainties resulting from prediction errors in the safety analyses performed for licensing submissions. However, the regulatory document RD-310 mentions that the analysis method shall account for uncertainties in the analysis data and models. A possible approach is presented, that is simple and reasonable, representing just the author's views, to take into account the impact of prediction errors and other uncertainties when performing safety analysis in line with regulatory requirements. The approach proposes taking into account the prediction error of relevant parameters. Relevant parameters would be those plant parameters that are surveyed and are used to initiate the action of a mitigating system or those that are representative of the most challenging phenomena for the integrity of a fission barrier. Examples of the application of the methodology are presented involving a comparison between the results with the new approach and a best estimate calculation during the blowdown phase for two small breaks in a generic CANDU 6 station. The calculations are performed with the CATHENA computer code. (author)

  15. SL(2, 7) representations and their relevance to neutrino physics

    Energy Technology Data Exchange (ETDEWEB)

    Aliferis, G.; Vlachos, N.D. [University of Thessaloniki, Department of Nuclear and Particle Physics, Thessaloniki (Greece); Leontaris, G.K. [University of Ioannina, Physics Department, Ioannina (Greece); CERN, Department of Physics, Geneva 23 (Switzerland)

    2017-06-15

    The investigation of the role of finite groups in flavor physics and, particularly, in the interpretation of the neutrino data has been the subject of intensive research. Motivated by this fact, in this work we derive the three-dimensional unitary representations of the projective linear group PSL{sub 2}(7). Based on the observation that the generators of the group exhibit a Latin square pattern, we use available computational packages on discrete algebra to determine the generic properties of the group elements. We present analytical expressions and discuss several examples which reproduce the neutrino mixing angles in accordance with the experimental data. (orig.)

  16. Algorithms and parameters for improved accuracy in physics data libraries

    International Nuclear Information System (INIS)

    Batič, M; Hoff, G; Pia, M G; Saracco, P; Han, M; Kim, C H; Hauf, S; Kuster, M; Seo, H

    2012-01-01

    Recent efforts for the improvement of the accuracy of physics data libraries used in particle transport are summarized. Results are reported about a large scale validation analysis of atomic parameters used by major Monte Carlo systems (Geant4, EGS, MCNP, Penelope etc.); their contribution to the accuracy of simulation observables is documented. The results of this study motivated the development of a new atomic data management software package, which optimizes the provision of state-of-the-art atomic parameters to physics models. The effect of atomic parameters on the simulation of radioactive decay is illustrated. Ideas and methods to deal with physics models applicable to different energy ranges in the production of data libraries, rather than at runtime, are discussed.

  17. SITE-94. Chemical and physical transport parameters for SITE-94

    Energy Technology Data Exchange (ETDEWEB)

    Andersson, Karin [Chalmers Univ. of Technology, Goeteborg (Sweden). Technical Environmental Planning

    1996-02-01

    Important parameters are the interactions of radionuclides with solid surfaces, parameters describing the geometrical conditions like porosity, data on water composition (ionic strength, pH, redox conditions, complex formers etc) and data on the solids that may be of importance to the water and radionuclide chemistry. In this report some of these data of relevance for the Aespoe site are discussed. Based on a literature survey, sorption data as well as values for some other parameters have been selected for rock, fracture fillings and bentonite relevant to the chemical conditions in and around a repository at Aespoe. A comparison to data used for earlier, site-specific as well as general, safety assessments of underground repositories has been performed. The data are recommendations for modelling of radionuclide release from a hypothetical high level waste repository at Aespoe. Since the data to a large extent are not based on experimental measurements, more accurate predictions may be expected if more experimental data are available. Before such studies are performed for a specific site, a variational analysis in order to evaluate the importance of the single parameters is recommended. After such a study, the key parameters may be investigated in detail and the modelling can be expected to be more accurate what concerns influence of single parameters. However, the uncertainty in conceptual areas like how to model accurately the long term hydrology of the site etc still remains. 32 refs.

  18. Indexes and parameters of activity in solar-terrestrial physics

    International Nuclear Information System (INIS)

    Minasyants, G.S.; Minasyants, T.M.

    2005-01-01

    The daily variation of different indexes and parameters of the solar-terrestrial physics at the 23 cycle were considered to find the most important from them for the forecast of geomagnetic activity. The validity of application of the Wolf numbers in quality of the characteristic of solar activity at sunspots is confirmed. The best geo-effective parameter in the arrival of the interplanetary shock from coronal mass ejection to an orbit of the Earth. (author)

  19. Outcome quality of in-patient cardiac rehabilitation in elderly patients--identification of relevant parameters.

    Science.gov (United States)

    Salzwedel, Annett; Nosper, Manfred; Röhrig, Bernd; Linck-Eleftheriadis, Sigrid; Strandt, Gert; Völler, Heinz

    2014-02-01

    Outcome quality management requires the consecutive registration of defined variables. The aim was to identify relevant parameters in order to objectively assess the in-patient rehabilitation outcome. From February 2009 to June 2010 1253 patients (70.9 ± 7.0 years, 78.1% men) at 12 rehabilitation clinics were enrolled. Items concerning sociodemographic data, the impairment group (surgery, conservative/interventional treatment), cardiovascular risk factors, structural and functional parameters and subjective health were tested in respect of their measurability, sensitivity to change and their propensity to be influenced by rehabilitation. The majority of patients (61.1%) were referred for rehabilitation after cardiac surgery, 38.9% after conservative or interventional treatment for an acute coronary syndrome. Functionally relevant comorbidities were seen in 49.2% (diabetes mellitus, stroke, peripheral artery disease, chronic obstructive lung disease). In three key areas 13 parameters were identified as being sensitive to change and subject to modification by rehabilitation: cardiovascular risk factors (blood pressure, low-density lipoprotein cholesterol, triglycerides), exercise capacity (resting heart rate, maximal exercise capacity, maximal walking distance, heart failure, angina pectoris) and subjective health (IRES-24 (indicators of rehabilitation status): pain, somatic health, psychological well-being and depression as well as anxiety on the Hospital Anxiety and Depression Scale). The outcome of in-patient rehabilitation in elderly patients can be comprehensively assessed by the identification of appropriate key areas, that is, cardiovascular risk factors, exercise capacity and subjective health. This may well serve as a benchmark for internal and external quality management.

  20. Estimation of Physical Parameters in Linear and Nonlinear Dynamic Systems

    DEFF Research Database (Denmark)

    Knudsen, Morten

    variance and confidence ellipsoid is demonstrated. The relation is based on a new theorem on maxima of an ellipsoid. The procedure for input signal design and physical parameter estimation is tested on a number of examples, linear as well as nonlinear and simulated as well as real processes, and it appears...

  1. The Comparison of Some Physical and Physiological Parameters of Footballers

    Science.gov (United States)

    Ekinci, Ezgi Samar; Beyleroglu, Malik; Ulukan, Hasan; Konuklar, Ercan; Gürkan, Alper Cenk; Erbay, Adem

    2016-01-01

    In this study, it's to aim for comparison of some physical and physiological parameters of footballers at "The Erenler Sport Team" and "Didim Municipality Sport Team". Thirty volunteers sportsman from each two teams joined to this research. It measured the values of age, weight, length, flexibility, balance, power of left-right…

  2. Integrating retention soil filters into urban hydrologic models - Relevant processes and important parameters

    Science.gov (United States)

    Bachmann-Machnik, Anna; Meyer, Daniel; Waldhoff, Axel; Fuchs, Stephan; Dittmer, Ulrich

    2018-04-01

    Retention Soil Filters (RSFs), a form of vertical flow constructed wetlands specifically designed for combined sewer overflow (CSO) treatment, have proven to be an effective tool to mitigate negative impacts of CSOs on receiving water bodies. Long-term hydrologic simulations are used to predict the emissions from urban drainage systems during planning of stormwater management measures. So far no universally accepted model for RSF simulation exists. When simulating hydraulics and water quality in RSFs, an appropriate level of detail must be chosen for reasonable balancing between model complexity and model handling, considering the model input's level of uncertainty. The most crucial parameters determining the resultant uncertainties of the integrated sewer system and filter bed model were identified by evaluating a virtual drainage system with a Retention Soil Filter for CSO treatment. To determine reasonable parameter ranges for RSF simulations, data of 207 events from six full-scale RSF plants in Germany were analyzed. Data evaluation shows that even though different plants with varying loading and operation modes were examined, a simple model is sufficient to assess relevant suspended solids (SS), chemical oxygen demand (COD) and NH4 emissions from RSFs. Two conceptual RSF models with different degrees of complexity were assessed. These models were developed based on evaluation of data from full scale RSF plants and column experiments. Incorporated model processes are ammonium adsorption in the filter layer and degradation during subsequent dry weather period, filtration of SS and particulate COD (XCOD) to a constant background concentration and removal of solute COD (SCOD) by a constant removal rate during filter passage as well as sedimentation of SS and XCOD in the filter overflow. XCOD, SS and ammonium loads as well as ammonium concentration peaks are discharged primarily via RSF overflow not passing through the filter bed. Uncertainties of the integrated

  3. Physical parameters for the application of MRI. Restrictions due to physiological consequences and guidelines

    International Nuclear Information System (INIS)

    Frese, G.; Hebrank, F.X.; Renz, W.; Storch, T.

    1998-01-01

    Purpose: The standards and regulations concerning the protection of patients and operator staff within the context of MRI are compiled. Resulting consequences regarding physical parameters are evaluated. Material and methods: The static magnetic field, heating effects caused by RF-fields and acoustical noise are outlined. The actual boundaries of these parameters are compared against the relevant published standards. Peripheral stimulation limits due to pulsed gradient fields have been determined in a new clinical study. Results: Many parameters recommended for the normal operating mode are already exceeded during routine MRI. Referring to our clinical study, we found that limits recommended in the MRI relevant standards are unnecessarily conservative and can actually be doubled. (orig./AJ) [de

  4. The physical environment and its relevance to customer satisfaction in boutique hotels; Hotel Haven, Helsinki

    OpenAIRE

    Jysmä, Ekaterina

    2012-01-01

    Object of this research is physical environment of the boutique hotel named Haven. As there is lack of the researches concerning physical environment role in the boutique hotels, this paper could be useful both for the studied hotel as well as for the other boutique hotels managers and owners. Moreover, it could be useful for the potential customers of Hotel Haven. Main topic of this research is the importance and relevance of the physical environment in Hotel Haven, mostly its impact o...

  5. An optimization method for parameters in reactor nuclear physics

    International Nuclear Information System (INIS)

    Jachic, J.

    1982-01-01

    An optimization method for two basic problems of Reactor Physics was developed. The first is the optimization of a plutonium critical mass and the bruding ratio for fast reactors in function of the radial enrichment distribution of the fuel used as control parameter. The second is the maximization of the generation and the plutonium burnup by an optimization of power temporal distribution. (E.G.) [pt

  6. Some relevant parameters for assessing fire hazards of combustible mine materials using laboratory scale experiments.

    Science.gov (United States)

    Litton, Charles D; Perera, Inoka E; Harteis, Samuel P; Teacoach, Kara A; DeRosa, Maria I; Thomas, Richard A; Smith, Alex C

    2018-04-15

    When combustible materials ignite and burn, the potential for fire growth and flame spread represents an obvious hazard, but during these processes of ignition and flaming, other life hazards present themselves and should be included to ensure an effective overall analysis of the relevant fire hazards. In particular, the gases and smoke produced both during the smoldering stages of fires leading to ignition and during the advanced flaming stages of a developing fire serve to contaminate the surrounding atmosphere, potentially producing elevated levels of toxicity and high levels of smoke obscuration that render the environment untenable. In underground mines, these hazards may be exacerbated by the existing forced ventilation that can carry the gases and smoke to locations far-removed from the fire location. Clearly, materials that require high temperatures (above 1400 K) and that exhibit low mass loss during thermal decomposition, or that require high heat fluxes or heat transfer rates to ignite represent less of a hazard than materials that decompose at low temperatures or ignite at low levels of heat flux. In order to define and quantify some possible parameters that can be used to assess these hazards, small-scale laboratory experiments were conducted in a number of configurations to measure: 1) the toxic gases and smoke produced both during non-flaming and flaming combustion; 2) mass loss rates as a function of temperature to determine ease of thermal decomposition; and 3) mass loss rates and times to ignition as a function of incident heat flux. This paper describes the experiments that were conducted, their results, and the development of a set of parameters that could possibly be used to assess the overall fire hazard of combustible materials using small scale laboratory experiments.

  7. Physical and geometrical parameters of VCBS XIII: HIP 105947

    Science.gov (United States)

    Gumaan Masda, Suhail; Al-Wardat, Mashhoor Ahmed; Pathan, Jiyaulla Khan Moula Khan

    2018-06-01

    The best physical and geometrical parameters of the main sequence close visual binary system (CVBS), HIP 105947, are presented. These parameters have been constructed conclusively using Al-Wardat’s complex method for analyzing CVBSs, which is a method for constructing a synthetic spectral energy distribution (SED) for the entire binary system using individual SEDs for each component star. The model atmospheres are in its turn built using the Kurucz (ATLAS9) line-blanketed plane-parallel models. At the same time, the orbital parameters for the system are calculated using Tokovinin’s dynamical method for constructing the best orbits of an interferometric binary system. Moreover, the mass-sum of the components, as well as the Δθ and Δρ residuals for the system, is introduced. The combination of Al-Wardat’s and Tokovinin’s methods yields the best estimations of the physical and geometrical parameters. The positions of the components in the system on the evolutionary tracks and isochrones are plotted and the formation and evolution of the system are discussed.

  8. Modelling of interplanetary pickup ion fluxes and relevance for LISM parameters

    International Nuclear Information System (INIS)

    Fahr, H.J.; Rucinski, D.

    1989-01-01

    It has been known for many years that neutral interstellar atoms enter the solar system from the upwind side and penetrate deep into the inner heliosphere. Helium atoms, in particular, advance towards very small solar distances before they are ionized and then again convected as He - pickup ions outwards with the solar wind. Since these ions were recently detected in space, we concentrate here on calculations of He + production rates and He + fluxes. It is shown that inside 1 a.u., the He - production is essentially determined both by solar e.u.v. photoionization and by electron impact ionization. We calculate He + production rates as a function of space coordinates, taking into account the core-halo structure of the energy distribution of solar wind electrons and their temperature distribution with distance according to relevant solar wind models. For this purpose, a newly developed program to compute He densities was used. In contrast to the production of H + , the He - production rates are found to be higher on the downwind axis than on the upwind axis by a factor of 5. We also determine partial and total He + ion fluxes as a function of solar distance and longitude. It is interesting to note that only the values for total fluxes agree well with the integrated He + fluxes measured by the SULEICA experiment aboard the AMPTE satellite. This indicates that pickup ions under the influence of the intrinsic MHD wave turbulence in the solar wind change their primary seed distribution function by rapid pitch-angle scattering and subsequent adiabatic cooling. To interpret the He + intensity profile along the orbit of the Earth in terms of LISM helium parameters, we point to the need to take into account carefully electron impact ionization in order to prevent misinterpretations. (author)

  9. Global and photospheric physical parameters of active dwarf stars

    International Nuclear Information System (INIS)

    Pettersen, B.R.

    1983-01-01

    Physical parameters (temperature, luminosity, radius, mass and chemical abundance) of the photospheres of red dwarf flare stars and spotted stars are determined for quiescent conditions. The interrelations between these quantities are compared to the results of theoretical investigation for low mass stars. The evolutionary state of flare stars is discussed. Observational results from spectroscopic and photometric methods to determine the rotation of active dwarfs are reviewed. The possibilities of global oscillations in dwarf stars are considered and preliminary results of a photometric search for oscillation in red dwarf luminosities are presented. (orig.)

  10. Hardrock Elastic Physical Properties: Birch's Seismic Parameter Revisited

    Science.gov (United States)

    Wu, M.; Milkereit, B.

    2014-12-01

    Identifying rock composition and properties is imperative in a variety of fields including geotechnical engineering, mining, and petroleum exploration, in order to accurately make any petrophysical calculations. Density is, in particular, an important parameter that allows us to differentiate between lithologies and estimate or calculate other petrophysical properties. It is well established that compressional and shear wave velocities of common crystalline rocks increase with increasing densities (i.e. the Birch and Nafe-Drake relationships). Conventional empirical relations do not take into account S-wave velocity. Physical properties of Fe-oxides and massive sulfides, however, differ significantly from the empirical velocity-density relationships. Currently, acquiring in-situ density data is challenging and problematic, and therefore, developing an approximation for density based on seismic wave velocity and elastic moduli would be beneficial. With the goal of finding other possible or better relationships between density and the elastic moduli, a database of density, P-wave velocity, S-wave velocity, bulk modulus, shear modulus, Young's modulus, and Poisson's ratio was compiled based on a multitude of lab samples. The database is comprised of isotropic, non-porous metamorphic rock. Multi-parameter cross plots of the various elastic parameters have been analyzed in order to find a suitable parameter combination that reduces high density outliers. As expected, the P-wave velocity to S-wave velocity ratios show no correlation with density. However, Birch's seismic parameter, along with the bulk modulus, shows promise in providing a link between observed compressional and shear wave velocities and rock densities, including massive sulfides and Fe-oxides.

  11. ANALYSIS THE DIURNAL VARIATIONS ON SELECTED PHYSICAL AND PHYSIOLOGICAL PARAMETERS

    Directory of Open Access Journals (Sweden)

    A. MAHABOOBJAN

    2010-12-01

    Full Text Available The purpose of the study was to analyze the diurnal variations on selected physical and physiological parameters such as speed, explosive power, resting heart rate and breath holding time among college students. To achieve the purpose of this study, a total of twenty players (n=20 from Government Arts College, Salem were selected as subjects To study the diurnal variation of the players on selected physiological and performance variables, the data were collected 4 times a day with every four hours in between the times it from 6.00 to 18.00 hours were selected as another categorical variable. One way repeated measures (ANOVA was used to analyze the data. If the obtained F-ratio was significant, Seheffe’s post-hoc test was used to find out the significant difference if anyamong the paired means. The level of significance was fixed at.05 level. It has concluded that both physical and physiological parameters were significantly deferred with reference to change of temperature in a day

  12. How to Select the most Relevant Roughness Parameters of a Surface: Methodology Research Strategy

    Science.gov (United States)

    Bobrovskij, I. N.

    2018-01-01

    In this paper, the foundations for new methodology creation which provides solving problem of surfaces structure new standards parameters huge amount conflicted with necessary actual floors quantity of surfaces structure parameters which is related to measurement complexity decreasing are considered. At the moment, there is no single assessment of the importance of a parameters. The approval of presented methodology for aerospace cluster components surfaces allows to create necessary foundation, to develop scientific estimation of surfaces texture parameters, to obtain material for investigators of chosen technological procedure. The methods necessary for further work, the creation of a fundamental reserve and development as a scientific direction for assessing the significance of microgeometry parameters are selected.

  13. Clinically Relevant Physical Benefits of Exercise Interventions in Breast Cancer Survivors.

    Science.gov (United States)

    Kirkham, Amy A; Bland, Kelcey A; Sayyari, Sarah; Campbell, Kristin L; Davis, Margot K

    2016-02-01

    Evidence is currently limited for the effect of exercise on breast cancer clinical outcomes. However, several of the reported physical benefits of exercise, including peak oxygen consumption, functional capacity, muscle strength and lean mass, cardiovascular risk factors, and bone health, have established associations with disability, cardiovascular disease risk, morbidity, and mortality. This review will summarize the clinically relevant physical benefits of exercise interventions in breast cancer survivors and discuss recommendations for achieving these benefits. It will also describe potential differences in intervention delivery that may impact outcomes and, lastly, describe current physical activity guidelines for cancer survivors.

  14. Proceedings of the tenth biennial national conference of Physics Academy of North East: recent advances in physics research and its relevance

    International Nuclear Information System (INIS)

    Chutia, Simanta; Saikia, Shantu

    2017-06-01

    This conference provided a platform to discuss the recent developments in Physics research in different fields which includes high energy astrophysics, condensed matter physics, electronics, spectroscopy, atmospheric sciences, cosmology, general physics etc. The papers relevant to INIS are indexed separately

  15. Meteorology, physical oceanography, transport of water, biogeochemistry, and other parameters collected at fixed locations in the open ocean from the OceanSITES network

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This collection comprises data covering meteorology, physical oceanography, transport of water, biogeochemistry, and parameters relevant to the carbon cycle, ocean...

  16. Redundant and physical black hole parameters: Is there an independent physical dilaton charge?

    Directory of Open Access Journals (Sweden)

    K. Hajian

    2017-05-01

    Full Text Available Black holes as solutions to gravity theories, are generically identified by a set of parameters. Some of these parameters are associated with black hole physical conserved charges, like ADM charges. There can also be some “redundant parameters.” We propose necessary conditions for a parameter to be physical. The conditions are essentially integrability and non-triviality of the charge variations arising from “parametric variations,” variation of the solution with respect to the chosen parameters. In addition, we prove that variation of the redundant parameters which do not meet our criteria do not appear in the first law of thermodynamics. As an interesting application, we show that dilaton moduli are redundant parameters for black hole solutions to Einstein–Maxwell–(Axion–Dilaton theories, because variations in dilaton moduli would render entropy, mass, electric charges or angular momenta non-integrable. Our results are in contrast with modification of the first law due to scalar charges suggested in Gibbons–Kallosh–Kol paper [1] and its follow-ups. We also briefly discuss implications of our results for the attractor behavior of extremal black holes.

  17. Redundant and physical black hole parameters: Is there an independent physical dilaton charge?

    Energy Technology Data Exchange (ETDEWEB)

    Hajian, K., E-mail: kamalhajian@ipm.ir; Sheikh-Jabbari, M.M., E-mail: jabbari@theory.ipm.ac.ir

    2017-05-10

    Black holes as solutions to gravity theories, are generically identified by a set of parameters. Some of these parameters are associated with black hole physical conserved charges, like ADM charges. There can also be some “redundant parameters.” We propose necessary conditions for a parameter to be physical. The conditions are essentially integrability and non-triviality of the charge variations arising from “parametric variations,” variation of the solution with respect to the chosen parameters. In addition, we prove that variation of the redundant parameters which do not meet our criteria do not appear in the first law of thermodynamics. As an interesting application, we show that dilaton moduli are redundant parameters for black hole solutions to Einstein–Maxwell–(Axion)–Dilaton theories, because variations in dilaton moduli would render entropy, mass, electric charges or angular momenta non-integrable. Our results are in contrast with modification of the first law due to scalar charges suggested in Gibbons–Kallosh–Kol paper and its follow-ups. We also briefly discuss implications of our results for the attractor behavior of extremal black holes.

  18. Standard model parameters and the search for new physics

    International Nuclear Information System (INIS)

    Marciano, W.J.

    1988-04-01

    In these lectures, my aim is to present an up-to-date status report on the standard model and some key tests of electroweak unification. Within that context, I also discuss how and where hints of new physics may emerge. To accomplish those goals, I have organized my presentation as follows: I discuss the standard model parameters with particular emphasis on the gauge coupling constants and vector boson masses. Examples of new physics appendages are also briefly commented on. In addition, because these lectures are intended for students and thus somewhat pedagogical, I have included an appendix on dimensional regularization and a simple computational example that employs that technique. Next, I focus on weak charged current phenomenology. Precision tests of the standard model are described and up-to-date values for the Cabibbo-Kobayashi-Maskawa (CKM) mixing matrix parameters are presented. Constraints implied by those tests for a 4th generation, supersymmetry, extra Z/prime/ bosons, and compositeness are also discussed. I discuss weak neutral current phenomenology and the extraction of sin/sup 2/ /theta//sub W/ from experiment. The results presented there are based on a recently completed global analysis of all existing data. I have chosen to concentrate that discussion on radiative corrections, the effect of a heavy top quark mass, and implications for grand unified theories (GUTS). The potential for further experimental progress is also commented on. I depart from the narrowest version of the standard model and discuss effects of neutrino masses and mixings. I have chosen to concentrate on oscillations, the Mikheyev-Smirnov- Wolfenstein (MSW) effect, and electromagnetic properties of neutrinos. On the latter topic, I will describe some recent work on resonant spin-flavor precession. Finally, I conclude with a prospectus on hopes for the future. 76 refs

  19. Dark energy and key physical parameters of clusters of galaxies

    Science.gov (United States)

    Bisnovatyi-Kogan, G. S.; Chernin, A. D.

    2012-04-01

    We study physics of clusters of galaxies embedded in the cosmic dark energy background. Under the assumption that dark energy is described by the cosmological constant, we show that the dynamical effects of dark energy are strong in clusters like the Virgo cluster. Specifically, the key physical parameters of the dark mater halos in clusters are determined by dark energy: (1) the halo cut-off radius is practically, if not exactly, equal to the zero-gravity radius at which the dark matter gravity is balanced by the dark energy antigravity; (2) the halo averaged density is equal to two densities of dark energy; (3) the halo edge (cut-off) density is the dark energy density with a numerical factor of the unity order slightly depending on the halo profile. The cluster gravitational potential well in which the particles of the dark halo (as well as galaxies and intracluster plasma) move is strongly affected by dark energy: the maximum of the potential is located at the zero-gravity radius of the cluster.

  20. Finding Relevant Parameters for the Thin-film Photovoltaic Cells Production Process with the Application of Data Mining Methods.

    Science.gov (United States)

    Ulaczyk, Jan; Morawiec, Krzysztof; Zabierowski, Paweł; Drobiazg, Tomasz; Barreau, Nicolas

    2017-09-01

    A data mining approach is proposed as a useful tool for the control parameters analysis of the 3-stage CIGSe photovoltaic cell production process, in order to find variables that are the most relevant for cell electric parameters and efficiency. The analysed data set consists of stage duration times, heater power values as well as temperatures for the element sources and the substrate - there are 14 variables per sample in total. The most relevant variables of the process have been found based on the so-called random forest analysis with the application of the Boruta algorithm. 118 CIGSe samples, prepared at Institut des Matériaux Jean Rouxel, were analysed. The results are close to experimental knowledge on the CIGSe cells production process. They bring new evidence to production parameters of new cells and further research. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  1. Lexical Studies of Filipino Person Descriptors: Adding Personality-Relevant Social and Physical Attributes.

    Science.gov (United States)

    Imperio, Shellah Myra; Church, A Timothy; Katigbak, Marcia S; Reyes, Jose Alberto S

    2008-06-01

    Lexical studies have focused on traits. In the Filipino language, we investigated whether additional dimensions can be identified when personality-relevant terms for social roles, statuses, and effects, plus physical attributes, are included. Filipino students (N = 496) rated themselves on 268 such terms, plus 253 markers of trait and evaluative dimensions. We identified 10 dimensions of social and physical attributes-Prominence, Uselessness, Attractiveness, Respectability, Uniqueness, Destructiveness, Presentableness, Strength, Dangerousness, and Charisma. Most of these dimensions did not correspond in a one-to-one manner to Filipino or alternative trait models (Big Five, HEXACO, ML7). However, considerable redundancy was observed between the social and physical attribute dimensions and trait and evaluative dimensions. Thus, social and physical attributes communicate information about personality traits, and vice-versa.

  2. Lexical Studies of Filipino Person Descriptors: Adding Personality-Relevant Social and Physical Attributes

    Science.gov (United States)

    Imperio, Shellah Myra; Church, A. Timothy; Katigbak, Marcia S.; Reyes, Jose Alberto S.

    2009-01-01

    Lexical studies have focused on traits. In the Filipino language, we investigated whether additional dimensions can be identified when personality-relevant terms for social roles, statuses, and effects, plus physical attributes, are included. Filipino students (N = 496) rated themselves on 268 such terms, plus 253 markers of trait and evaluative dimensions. We identified 10 dimensions of social and physical attributes—Prominence, Uselessness, Attractiveness, Respectability, Uniqueness, Destructiveness, Presentableness, Strength, Dangerousness, and Charisma. Most of these dimensions did not correspond in a one-to-one manner to Filipino or alternative trait models (Big Five, HEXACO, ML7). However, considerable redundancy was observed between the social and physical attribute dimensions and trait and evaluative dimensions. Thus, social and physical attributes communicate information about personality traits, and vice-versa. PMID:19779603

  3. Parameters for calculation of nuclear reactions of relevance to non-energy nuclear applications (Reference Input Parameter Library: Phase III). Summary report of the first research coordination meeting

    International Nuclear Information System (INIS)

    Capote Noy, R.

    2004-08-01

    A summary is given of the First Research Coordination Meeting on Parameters for Calculation of Nuclear Reactions of Relevance to Non-Energy Nuclear Applications (Reference Input Parameter Library: Phase III), including a critical review of the RIPL-2 file. The new library should serve as input for theoretical calculations of nuclear reaction data at incident energies up to 200 MeV, as needed for energy and non-energy modern applications of nuclear data. Technical discussions and the resulting work plan of the Coordinated Research Programme are summarized, along with actions and deadlines. Participants' contributions to the RCM are also attached. (author)

  4. Physically based model for extracting dual permeability parameters using non-Newtonian fluids

    Science.gov (United States)

    Abou Najm, M. R.; Basset, C.; Stewart, R. D.; Hauswirth, S.

    2017-12-01

    Dual permeability models are effective for the assessment of flow and transport in structured soils with two dominant structures. The major challenge to those models remains in the ability to determine appropriate and unique parameters through affordable, simple, and non-destructive methods. This study investigates the use of water and a non-Newtonian fluid in saturated flow experiments to derive physically-based parameters required for improved flow predictions using dual permeability models. We assess the ability of these two fluids to accurately estimate the representative pore sizes in dual-domain soils, by determining the effective pore sizes of macropores and micropores. We developed two sub-models that solve for the effective macropore size assuming either cylindrical (e.g., biological pores) or planar (e.g., shrinkage cracks and fissures) pore geometries, with the micropores assumed to be represented by a single effective radius. Furthermore, the model solves for the percent contribution to flow (wi) corresponding to the representative macro and micro pores. A user-friendly solver was developed to numerically solve the system of equations, given that relevant non-Newtonian viscosity models lack forms conducive to analytical integration. The proposed dual-permeability model is a unique attempt to derive physically based parameters capable of measuring dual hydraulic conductivities, and therefore may be useful in reducing parameter uncertainty and improving hydrologic model predictions.

  5. Analysis of all dimensionful parameters relevant in gravitational dressing of conformal theories

    International Nuclear Information System (INIS)

    Dorn, H.; Otto, H.J.

    1992-01-01

    Starting from a covariant and background independent definition of normal ordered vertex operators we give an alternative derivation of the KPZ relation between conformal dimensions and their gravitational dressed partners. With our method we are able to study for arbitrary genus the dependence of N-point functions on all dimensionful parameters. Implications for the interpretation of gravitational dressed dimensions are discussed. (orig.)

  6. Measurements of relevant parameters in the formation of clathrate hydrates by a novel experimental apparatus

    Energy Technology Data Exchange (ETDEWEB)

    Arca, S.; Di Profio, P.; Germani, R.; Savelli, G. [Perugia Univ., CEMIN, Perugia (Italy). Dept. of Chemistry

    2008-07-01

    There is a growing interest in understanding the thermodynamics and kinetics of clathrate hydrate formation. This paper presented a study that involved the design, construction, calibration, and testing of a new apparatus that could obtain as many parameters as possible in a single formation batch and that could measure unexplored clathrate hydrate parameters. The apparatus was capable of measuring equilibrium phases involving gaseous components. The paper described the conceptual design as well as the chamber, pressure line, temperature control, liquid addition line, and conductometric probe. The paper also discussed data acquisition, stirring, measurement examples, and internal illumination and video monitoring. It was concluded that refining measurements, particularly those concerning kinetic characterizations, is important in order to clarify several uncertain kinetic behaviors of clathrate hydrates. 6 refs., 16 figs.

  7. The spectroscopic orbits and physical parameters of GG Carinae

    Science.gov (United States)

    Marchiano, P.; Brandi, E.; Muratore, M. F.; Quiroga, C.; Ferrer, O. E.; García, L. G.

    2012-04-01

    Aims: GG Car is an eclipsing binary classified as a B[e] supergiant star. The aims of our study are to improve the orbital elements of the binary system in order to obtain the actual orbital period of this system. We also compare the spectral energy distribution of the observed fluxes over a wide wavelength range with a model of a circumstellar envelope composed of gas and dust. This fitting allows us to derive the physical parameters of the system and its environment, as well as to obtain an estimation of the distance to GG Car. Methods: We analyzed about 55 optical and near infrared spectrograms taken during 1996-2010. The spectroscopic orbits were obtained by measuring the radial velocities of the blueshifted absorptions of the He I P-Cygni profiles, which are very representative of the orbital motion of both stars. On the other hand, we modeled the spectral energy distribution of GG Car, proposing a simple model of a spherical envelope consisting of a layer close to the central star composed of ionized gas and other outermost layers composed of dust. Its effect on the spectral energy distribution considering a central B-type star is presented. Comparing the model with the observed continuum energy distribution of GG Car, we can derive fundamental parameters of the system, as well as global physical properties of the gas and dust envelope. It is also possible to estimate the distance taking the spectral regions into account where the theoretical data fit the observational data very well and using the set of parameters obtained and the value of the observed flux for different wavelengths. Results: For the first time, we have determined the orbits for both components of the binary through a detailed study of the He I lines, at λλ4471, 5875, 6678, and 7065 Å, thereby obtaining an orbital period of 31.033 days. An eccentric orbit with e = 0.28 and a mass ratio q = 2.2 ± 0.9 were calculated. Comparing the model with the observed continuum energy distribution of

  8. Status report [Parameters for calculation of nuclear reactions of relevance to non-energy nuclear applications

    International Nuclear Information System (INIS)

    Koning, A.

    2008-01-01

    Full text: Masses: Adopted Goriely HFB masses in TALYS as theoretical default instead of Moeller. Audi-Wapstra, Moeller and HFB masses tested formally with TALYS. Levels. Adopted latest discrete level update (2006) by Belgya (as sent by Capote) in TALYS. Tested with TALYS. Resonances. Adopted RIPL-2 D0 collection in TALYS. Tested by TALYS. Optical model. Coordinated Optical model segment for RIPL-3. Adopted Soukhovitskii CC potential as default for actinides. Covariances: Confirmed OMP parameter uncertainties from last meeting. Level density. Produced consistent set of level density parameters for CTM, BFM, GSM and HFM. Local models (per nucleus) and global models (systematics). With and without effective collective enhancement. Included and tested with TALYS Gamma-ray strength. Adopted Goriely HFB strength function tables as option (not default) in TALYS. Both formally tested and validated with TALYS. Fission. Adopted Sin-Capote WKB approximation in TALYS as option for fission calculations. Formally tested. RIPL-2/3 validation. Very extensive formal tests and validation procedures with TALYS. MONKEY code for random input files (has found RIPL errors in the past). Automatic comparison with all available EXFOR cross section data (for level density study). Started work on global parameter uncertainties (for covariances). SALTY nuclear data library (final version under construction): - 60 MeV n,g,p,d,t,h,a activation files for 1200 nuclides - 200 MeV n,g,p,d,t,h,a transport files for 250 nuclides RIPL is automatically being used by all TALYS users (and TALYS-related publications). TALYS-1.0 release in December 2007 (delay because of level densities). (author)

  9. Chemical abundances and physical parameters of RR Lyrae stars

    International Nuclear Information System (INIS)

    Manduca, A.

    1980-01-01

    A grid of model stellar atmospheres has been calculated with a range of physical parameters which effectively cover RR Lyrae stars over all phases of their pulsation cycle. The models, calculated with the computer program MARCS, are flux-constant and include the effects of convection and line blanketing. Synthetic spectra were calculated for these models from 3000 A to 9600 A at 0.1 A resolution using the computer program SSG. These spectra were used directly in the applications below and were also used to computer theoretical colors on the UBVR, Stromgren uvby, and Walraven systems for the models. The uvby colors were used in determinations of effective temperature and surface gravity from photometry by various observers. The models, synthetic spectra, and colors were then applied to the problems detailed below. The data collected by Freeman and Rodgers (1975) for 25 RR Lyrae stars in ω Cen was reanalyzed with an alternative, synthetic spectrum approach to the calibration of their theoretical relations. The results confirm a wide range in calcium abundance for the stars in the cluster but at much lower values than reported by Freeman and Rodgers: a range of [Ca/H] = -1.0 to -1.9 was found. A theoretical calibration was performed for the ΔS system of determining metal abundances for RR Lyrae stars. The results support the existing empirical calibration of Butler in the range [Fe/H] = -0.6 to -2.2 and indicate how the calibration should be extrapolated to even lower metal abundances. For higher metal abundances, however, our calibration yields [Fe/H] values lower than Butler by as much as 0.4. Possible explanations of this discrepancy are investigated and the implications are discussed

  10. Chemical and physical parameters of dried salted pork meat

    Directory of Open Access Journals (Sweden)

    Petronela Cviková

    2016-07-01

    Full Text Available The aim of the present study was analysed and evaluated chemical and physical parameters of dried salted pork neck and ham. Dried salted meat is one of the main meat products typically produced with a variety of flavors and textures. Neck (14 samples and ham (14 samples was salted by nitrite salt mixture during 1week. The nitrite salt mixture for salting process (dry salting was used. This salt mixture contains: salt, dextrose, maltodextrin, flavourings, stabilizer E316, taste enhancer E621, nitrite mixture. The meat samples were dried at 4 °C and relative humudity 85% after 1 week salting. The weight of each sample was approximately 1 kg. After salting were vacuum-packed and analysed after 1 week. The traditional dry-cured meat such as dry-cured ham and neck obtained after 12 - 24 months of ripening under controlled conditions. The average protein content was significantly (p <0.001 lower in dried pork neck in comparison with dried salted pork ham. The average intramuscular fat was significantly (p <0.001 lower in dried pork ham in comparison with dried salted pork neck. The average moisture was significantly lower (p ≤0.05 in dried salted ham in comparison with dried pork neck. The average pH value was 5.50 in dried salted pork ham and 5.75 in dried salted pork neck. The content of arginine, phenylalanine, isoleucine, leucine and threonine in dried salted ham was significantly lower (p <0.001 in comparison with dried salted pork neck. The proportion of analysed amino acids from total proteins was 56.31% in pork salted dried ham and 56.50% in pork salted dried neck.  Normal 0 21 false false false EN-GB X-NONE X-NONE Normal 0 21 false false false SK X-NONE X-NONE

  11. Atlas selection for hippocampus segmentation: Relevance evaluation of three meta-information parameters.

    Science.gov (United States)

    Dill, Vanderson; Klein, Pedro Costa; Franco, Alexandre Rosa; Pinho, Márcio Sarroglia

    2018-04-01

    Current state-of-the-art methods for whole and subfield hippocampus segmentation use pre-segmented templates, also known as atlases, in the pre-processing stages. Typically, the input image is registered to the template, which provides prior information for the segmentation process. Using a single standard atlas increases the difficulty in dealing with individuals who have a brain anatomy that is morphologically different from the atlas, especially in older brains. To increase the segmentation precision in these cases, without any manual intervention, multiple atlases can be used. However, registration to many templates leads to a high computational cost. Researchers have proposed to use an atlas pre-selection technique based on meta-information followed by the selection of an atlas based on image similarity. Unfortunately, this method also presents a high computational cost due to the image-similarity process. Thus, it is desirable to pre-select a smaller number of atlases as long as this does not impact on the segmentation quality. To pick out an atlas that provides the best registration, we evaluate the use of three meta-information parameters (medical condition, age range, and gender) to choose the atlas. In this work, 24 atlases were defined and each is based on the combination of the three meta-information parameters. These atlases were used to segment 352 vol from the Alzheimer's Disease Neuroimaging Initiative (ADNI) database. Hippocampus segmentation with each of these atlases was evaluated and compared to reference segmentations of the hippocampus, which are available from ADNI. The use of atlas selection by meta-information led to a significant gain in the Dice similarity coefficient, which reached 0.68 ± 0.11, compared to 0.62 ± 0.12 when using only the standard MNI152 atlas. Statistical analysis showed that the three meta-information parameters provided a significant improvement in the segmentation accuracy. Copyright © 2018 Elsevier Ltd

  12. Identification of Physical Parameters for A Hydraulic Robot

    DEFF Research Database (Denmark)

    Madsen, Henrik; Zhou, Jianjun; Hansen, Lars Henrik

    1997-01-01

    This paper describes a case study of identifying the physical model of a hydraulic test robot. The obtained model is intended to provide a basis for model-based control of the robot. The physical model is formulated in continuous time and is derived by application of the laws of physics...

  13. Physical, chemical, and biological properties of radiocerium relevant to radiation protection guidelines

    International Nuclear Information System (INIS)

    Anon.

    1978-01-01

    Present knowledge of the relevant physical, chemical, and biological properties of radiocerium as a basis for establishing radiation protection guidelines is summarized. The first section of the report reviews the chemical and physical properties of radiocerium relative to the biological behavior of internally-deposited cerium and other lanthanides. The second section of the report gives the sources of radiocerium in the environment and the pathways to man. The third section of the report describes the metabolic fate of cerium in several mammalian species as a basis for predicting its metabolic fate in man. The fourth section of the report considers the biomedical effects of radiocerium in light of extensive animal experimentation. The last two sections of the report describe the history of radiation protection guidelines for radiocerium and summarize data required for evaluating the adequacy of current radiation protection guidelines. Each section begins with a summary of the most important findings that follow

  14. Leisure-time physical activity and some psychological parameters ...

    African Journals Online (AJOL)

    ... physical work capacity for the demands of daily living and job performance. ... physical activity and psychological well-being of executive employees; and to ... A cross-sectional study design was carried out on a group of 156 (mean age; ...

  15. Inverse analyses of effective diffusion parameters relevant for a two-phase moisture model of cementitious materials

    DEFF Research Database (Denmark)

    Addassi, Mouadh; Johannesson, Björn; Wadsö, Lars

    2018-01-01

    Here we present an inverse analyses approach to determining the two-phase moisture transport properties relevant to concrete durability modeling. The purposed moisture transport model was based on a continuum approach with two truly separate equations for the liquid and gas phase being connected...... test, and, (iv) capillary suction test. Mass change over time, as obtained from the drying test, the two different cup test intervals and the capillary suction test, was used to obtain the effective diffusion parameters using the proposed inverse analyses approach. The moisture properties obtained...

  16. Reframing conceptual physics: Improving relevance to elementary education and sonography majors

    Science.gov (United States)

    LaFazia, David Gregory

    This study outlines the steps taken to reframe the Waves and Periodicity unit within a conceptual physics course. Beyond this unit reframing process, this paper explores the activities that made up the reframed unit and how each was developed and revised. The unit was reframed to improve relevance of the activities to the Elementary Education and Diagnostic Medical Sonography majors who make up the bulk of the course roster. The unit was reframed around ten design principles that were built on best practices from the literature, survey responses, and focused interviews. These principles support the selection of a biology-integrated themed approach to teaching physics. This is done through active and highly kinesthetic learning across three realms of human experience: physical, social, and cognitive. The unit materials were designed around making connections to students' future careers while requiring students to take progressively more responsibility in activities and assessments. Several support strategies are employed across these activities and assessments, including an energy-first, guided-inquiry approach to concept scaffolding and accommodations for diverse learners. Survey responses were solicited from physics instructors experienced with this population, Elementary Education and Sonography program advisors, and curriculum design, learning strategies, and educational technology experts. The reframed unit was reviewed by doctoral-level science education experts and revised to further improve the depth and transparency with which the design principles reframe the unit activities. The reframed unit contains a full unit plan, lesson plans, and full unit materials. These include classroom and online activities, assessments, and templates for future unit and lesson planning. Additional supplemental materials are provided to support Elementary Education and Sonography students and program advisors and also further promote the reframed unit materials and design

  17. Physical and geometrical parameters of ANNA critical assemblies. Pt. 2

    International Nuclear Information System (INIS)

    Malewski, S.; Dabrowski, C.

    1973-01-01

    An extended analysis of four critical configurations of ANNA Assembly has been performed. Diffusion parameters of the thermal group and of one or three epithermal groups have been determined. Using these data the critical calculations have been carried out and the main neutron density distributions presented. The role of some neutron processes in these systems and their influence on integral parameters has been considered. The calculated quantities have been compared with the available experimental data. (author)

  18. Green roof rainfall-runoff modelling: is the comparison between conceptual and physically based approaches relevant?

    Science.gov (United States)

    Versini, Pierre-Antoine; Tchiguirinskaia, Ioulia; Schertzer, Daniel

    2017-04-01

    Green roofs are commonly considered as efficient tools to mitigate urban runoff as they can store precipitation, and consequently provide retention and detention performances. Designed as a compromise between water holding capacity, weight and hydraulic conductivity, their substrate is usually an artificial media differentiating significantly from a traditional soil. In order to assess green roofs hydrological performances, many models have been developed. Classified into two categories (conceptual and physically based), they are usually applied to reproduce the discharge of a particular monitored green roof considered as homogeneous. Although the resulted simulations could be satisfactory, the question of robustness and consistency of the calibrated parameters is often not addressed. Here, a modeling framework has been developed to assess the efficiency and the robustness of both modelling approaches (conceptual and physically based) in reproducing green roof hydrological behaviour. SWMM and VS2DT models have been used for this purpose. This work also benefits from an experimental setup where several green roofs differentiated by their substrate thickness and vegetation cover are monitored. Based on the data collected for several rainfall events, it has been studied how the calibrated parameters are effectively linked to their physical properties and how they can vary from one green roof configuration to another. Although both models reproduce correctly the observed discharges in most of the cases, their calibrated parameters exhibit a high inconsistency. For a same green roof configuration, these parameters can vary significantly from one rainfall event to another, even if they are supposed to be linked to the green roof characteristics (roughness, residual moisture content for instance). They can also be different from one green roof configuration to another although the implemented substrate is the same. Finally, it appears very difficult to find any

  19. Repository environmental parameters and models/methodologies relevant to assessing the performance of high-level waste packages in basalt, tuff, and salt

    Energy Technology Data Exchange (ETDEWEB)

    Claiborne, H.C.; Croff, A.G.; Griess, J.C.; Smith, F.J.

    1987-09-01

    This document provides specifications for models/methodologies that could be employed in determining postclosure repository environmental parameters relevant to the performance of high-level waste packages for the Basalt Waste Isolation Project (BWIP) at Richland, Washington, the tuff at Yucca Mountain by the Nevada Test Site, and the bedded salt in Deaf Smith County, Texas. Guidance is provided on the identify of the relevant repository environmental parameters; the models/methodologies employed to determine the parameters, and the input data base for the models/methodologies. Supporting studies included are an analysis of potential waste package failure modes leading to identification of the relevant repository environmental parameters, an evaluation of the credible range of the repository environmental parameters, and a summary of the review of existing models/methodologies currently employed in determining repository environmental parameters relevant to waste package performance. 327 refs., 26 figs., 19 tabs.

  20. Repository environmental parameters and models/methodologies relevant to assessing the performance of high-level waste packages in basalt, tuff, and salt

    International Nuclear Information System (INIS)

    Claiborne, H.C.; Croff, A.G.; Griess, J.C.; Smith, F.J.

    1987-09-01

    This document provides specifications for models/methodologies that could be employed in determining postclosure repository environmental parameters relevant to the performance of high-level waste packages for the Basalt Waste Isolation Project (BWIP) at Richland, Washington, the tuff at Yucca Mountain by the Nevada Test Site, and the bedded salt in Deaf Smith County, Texas. Guidance is provided on the identify of the relevant repository environmental parameters; the models/methodologies employed to determine the parameters, and the input data base for the models/methodologies. Supporting studies included are an analysis of potential waste package failure modes leading to identification of the relevant repository environmental parameters, an evaluation of the credible range of the repository environmental parameters, and a summary of the review of existing models/methodologies currently employed in determining repository environmental parameters relevant to waste package performance. 327 refs., 26 figs., 19 tabs

  1. Nonlinear waves in Bose–Einstein condensates: physical relevance and mathematical techniques

    International Nuclear Information System (INIS)

    Carretero-González, R; Frantzeskakis, D J; Kevrekidis, P G

    2008-01-01

    The aim of this review is to introduce the reader to some of the physical notions and the mathematical methods that are relevant to the study of nonlinear waves in Bose–Einstein condensates (BECs). Upon introducing the general framework, we discuss the prototypical models that are relevant to this setting for different dimensions and different potentials confining the atoms. We analyse some of the model properties and explore their typical wave solutions (plane wave solutions, bright, dark, gap solitons as well as vortices). We then offer a collection of mathematical methods that can be used to understand the existence, stability and dynamics of nonlinear waves in such BECs, either directly or starting from different types of limits (e.g. the linear or the nonlinear limit or the discrete limit of the corresponding equation). Finally, we consider some special topics involving more recent developments, and experimental setups in which there is still considerable need for developing mathematical as well as computational tools. (invited article)

  2. Weibull Parameters Estimation Based on Physics of Failure Model

    DEFF Research Database (Denmark)

    Kostandyan, Erik; Sørensen, John Dalsgaard

    2012-01-01

    Reliability estimation procedures are discussed for the example of fatigue development in solder joints using a physics of failure model. The accumulated damage is estimated based on a physics of failure model, the Rainflow counting algorithm and the Miner’s rule. A threshold model is used...... for degradation modeling and failure criteria determination. The time dependent accumulated damage is assumed linearly proportional to the time dependent degradation level. It is observed that the deterministic accumulated damage at the level of unity closely estimates the characteristic fatigue life of Weibull...

  3. Physical characteristics and resistance parameters of typical urban cyclists.

    Science.gov (United States)

    Tengattini, Simone; Bigazzi, Alexander York

    2018-03-30

    This study investigates the rolling and drag resistance parameters and bicycle and cargo masses of typical urban cyclists. These factors are important for modelling of cyclist speed, power and energy expenditure, with applications including exercise performance, health and safety assessments and transportation network analysis. However, representative values for diverse urban travellers have not been established. Resistance parameters were measured utilizing a field coast-down test for 557 intercepted cyclists in Vancouver, Canada. Masses were also measured, along with other bicycle attributes such as tire pressure and size. The average (standard deviation) of coefficient of rolling resistance, effective frontal area, bicycle plus cargo mass, and bicycle-only mass were 0.0077 (0.0036), 0.559 (0.170) m 2 , 18.3 (4.1) kg, and 13.7 (3.3) kg, respectively. The range of measured values is wider and higher than suggested in existing literature, which focusses on sport cyclists. Significant correlations are identified between resistance parameters and rider and bicycle attributes, indicating higher resistance parameters for less sport-oriented cyclists. The findings of this study are important for appropriately characterising the full range of urban cyclists, including commuters and casual riders.

  4. Physical parameter determinations of young Ms. Taking advantage of the Virtual Observatory to compare methodologies

    Science.gov (United States)

    Bayo, A.; Rodrigo, C.; Barrado, D.; Allard, F.

    One of the very first steps astronomers working in stellar physics perform to advance in their studies, is to determine the most common/relevant physical parameters of the objects of study (effective temperature, bolometric luminosity, surface gravity, etc.). Different methodologies exist depending on the nature of the data, intrinsic properties of the objects, etc. One common approach is to compare the observational data with theoretical models passed through some simulator that will leave in the synthetic data the same imprint than the observational data carries, and see what set of parameters reproduce the observations best. Even in this case, depending on the kind of data the astronomer has, the methodology changes slightly. After parameters are published, the community tend to quote, praise and criticize them, sometimes paying little attention on whether the possible discrepancies come from the theoretical models, the data themselves or just the methodology used in the analysis. In this work we perform the simple, yet interesting, exercise of comparing the effective temperatures obtained via SED and more detailed spectral fittings (to the same grid of models), of a sample of well known and characterized young M-type objects members to different star forming regions and show how differences in temperature of up to 350 K can be expected just from the difference in methodology/data used. On the other hand we show how these differences are smaller for colder objects even when the complexity of the fit increases like for example introducing differential extinction. To perform this exercise we benefit greatly from the framework offered by the Virtual Observaotry.

  5. SEASONAL DIFFERENCES IN PHYSICAL ACTIVITY AND SEDENTARY PATTERNS: THE RELEVANCE OF THE PA CONTEXT

    Directory of Open Access Journals (Sweden)

    Pedro Silva

    2011-03-01

    Full Text Available The aim of this pilot study was to characterize seasonal variation in the moderate to vigorous physical activity (MVPA and sedentary behavior of Portuguese school youth, and understand the influence of activity choices and settings. The participants in this study were 24 students, aged 10-13 years. Accelerometers measured daily PA over 7 consecutive days, in different seasons May - June and January - February. In summer, boys accumulated more minutes in MVPA (928 minutes/week than girls (793 minutes/week. In winter the pattern was reversed with girls accumulating more activity than boys (736 minutes/week vs. 598 minutes/week. The repeated measures ANOVA revealed significant effects for season (F = 5.98, p = 0.023 and in- school vs. out-of-school (F = 6.53, p = 0.018. Youth were more active in the summer and activity levels were higher after school than in school. Summer season provided relevant contexts for youth physical activity accumulation. Winter season may have been a significant barrier to boy's preferred PA context. Differences in choices of outdoor or indoor PA, after school, explained the gender differences in seasonal activity patterns

  6. Exploring possible selves in a first-year physics foundation class: Engaging students by establishing relevance

    Directory of Open Access Journals (Sweden)

    Dawn Bennett

    2016-03-01

    Full Text Available Students often complain that they cannot see the relevance of what they are being taught in foundation physics classes. While revising and adjusting the curriculum and teaching are important, this study suggests it might also be useful to help students view their learning in relation to their future career aspirations. This paper reports on a study conducted with first-year students enrolled in a compulsory foundation physics unit with a history of low pass rates. Working within a “possible selves” framework, activities were designed to help students position their learning in relation to possible future lives and careers. Two cohorts of students (N=93 engaged in an intensive workshop comprising multiple activities relating to self and career. Self-reflection worksheets were analyzed using content analysis. The results indicate that students experience immediate benefits from these activities through self-reflection on the current self, future possible professional selves, and the role of current studies in narrowing the gap between the two.

  7. Relevant parameters in the micro silica selection for the self-flowing ultra-low cement castables production

    International Nuclear Information System (INIS)

    Studart, A.R.; Pandolfelli, V.C.; Rodrigues, J.A.; Vendrasco, S.L.

    1997-01-01

    Self-flowing ultra-low cement castables typically contain a large fraction of the particles, usually fume silica, which increase their flowability and mechanical strength at low temperatures. Fume silicas available in the market differ mainly from their amount of impurities. It is assumed that the content of soluble alkali and free carbon containing in this raw-material affects strongly the processing of self-flowing castable. In this work high alumina castables with gap-sized particle size distribution were prepared to evaluate their flowability, workability and mechanical strength for each sort of fume silica studied. It was observed that the amount of impurities affects both deflocculation and setting time of the castables and their cold and hot mechanical strength. Considerations regarding the physical and chemical characteristics relevant for selecting fume silicas for the production of self-flowing castables are presented and discussed. (author)

  8. Dietary supplementation of tiger nut alters biochemical parameters relevant to erectile function in l-NAME treated rats.

    Science.gov (United States)

    Olabiyi, Ayodeji A; Carvalho, Fabiano B; Bottari, Nathieli B; Lopes, Thauan F; da Costa, Pauline; Stefanelo, Naiara; Morsch, Vera M; Akindahunsi, Afolabi A; Oboh, Ganiyu; Schetinger, Maria Rosa

    2018-07-01

    Tiger nut tubers have been reportedly used for the treatment of erectile dysfunction (ED) in folk medicine without scientific basis. Hence, this study evaluated the effect of tiger nut on erectile dysfunction by assessing biochemical parameters relevant to ED in male rats by nitric oxide synthase (NOS) inhibitor, Nω-nitro-l-arginine methyl ester hydrochloride (l-NAME) treatment. Rats were divided into five groups (n = 10) each: Control group; l-NAME plus basal diet; l-NAME plus Sildenafil citrate; diet supplemented processed tiger nut (20%) plus l-NAME;diet supplemented raw tiger nut (20%) plus l-NAME. l-NAME pre-treatment (40 mg/kg/day) lasted for 14 days. Arginase, acetycholinesterase (AChE) and adenosine deaminase (ADA) activities as well as nitric oxide levels (NO) in serum, brain and penile tissue were measured. l-NAME increased the activity of arginase, AChE and ADA and reduced NO levels. However, dietary supplementation with tiger nut caused a reduction on the activities of the above enzymes and up regulated nitric oxide levels when compared to the control group. The effect of tiger nut supplemented diet may be said to prevent alterations of the activities of the enzymes relevant in erectile function. Quercetin was revealed to be the most active component of tiger nut tuber by HPLC finger printing. Copyright © 2018. Published by Elsevier Ltd.

  9. Prediction of scaling physics laws for proton acceleration with extended parameter space of the NIF ARC

    Science.gov (United States)

    Bhutwala, Krish; Beg, Farhat; Mariscal, Derek; Wilks, Scott; Ma, Tammy

    2017-10-01

    The Advanced Radiographic Capability (ARC) laser at the National Ignition Facility (NIF) at Lawrence Livermore National Laboratory is the world's most energetic short-pulse laser. It comprises four beamlets, each of substantial energy ( 1.5 kJ), extended short-pulse duration (10-30 ps), and large focal spot (>=50% of energy in 150 µm spot). This allows ARC to achieve proton and light ion acceleration via the Target Normal Sheath Acceleration (TNSA) mechanism, but it is yet unknown how proton beam characteristics scale with ARC-regime laser parameters. As theory has also not yet been validated for laser-generated protons at ARC-regime laser parameters, we attempt to formulate the scaling physics of proton beam characteristics as a function of laser energy, intensity, focal spot size, pulse length, target geometry, etc. through a review of relevant proton acceleration experiments from laser facilities across the world. These predicted scaling laws should then guide target design and future diagnostics for desired proton beam experiments on the NIF ARC. This work performed under the auspices of the U.S. Department of Energy by Lawrence Livermore National Laboratory under Contract DE-AC52-07NA27344 and funded by the LLNL LDRD program under tracking code 17-ERD-039.

  10. Social marketing: approach to cultural and contextual relevance in a community-based physical activity intervention

    Science.gov (United States)

    Keller, Colleen; Vega-López, Sonia; Ainsworth, Barbara; Nagle-Williams, Allison; Records, Kathie; Permana, Paska; Coonrod, Dean

    2014-01-01

    We report the social marketing strategies used for the design, recruitment and retention of participants in a community-based physical activity (PA) intervention, Madres para la Salud (Mothers for Health). The study example used to illustrate the use of social marketing is a 48-week prescribed walking program, Madres para la Salud (Mothers for Health), which tests a social support intervention to explore the effectiveness of a culturally specific program using ‘bouts’ of PA to effect the changes in body fat, fat tissue inflammation and postpartum depression symptoms in sedentary Hispanic women. Using the guidelines from the National Benchmark Criteria, we developed intervention, recruitment and retention strategies that reflect efforts to draw on community values, traditions and customs in intervention design, through partnership with community members. Most of the women enrolled in Madres para la Salud were born in Mexico, largely never or unemployed and resided among the highest crime neighborhoods with poor access to resources. We developed recruitment and retention strategies that characterized social marketing strategies that employed a culturally relevant, consumer driven and problem-specific design. Cost and benefit of program participation, consumer-derived motivation and segmentation strategies considered the development transition of the young Latinas as well as cultural and neighborhood barriers that impacted retention are described. PMID:23002252

  11. Social marketing: approach to cultural and contextual relevance in a community-based physical activity intervention.

    Science.gov (United States)

    Keller, Colleen; Vega-López, Sonia; Ainsworth, Barbara; Nagle-Williams, Allison; Records, Kathie; Permana, Paska; Coonrod, Dean

    2014-03-01

    We report the social marketing strategies used for the design, recruitment and retention of participants in a community-based physical activity (PA) intervention, Madres para la Salud (Mothers for Health). The study example used to illustrate the use of social marketing is a 48-week prescribed walking program, Madres para la Salud (Mothers for Health), which tests a social support intervention to explore the effectiveness of a culturally specific program using 'bouts' of PA to effect the changes in body fat, fat tissue inflammation and postpartum depression symptoms in sedentary Hispanic women. Using the guidelines from the National Benchmark Criteria, we developed intervention, recruitment and retention strategies that reflect efforts to draw on community values, traditions and customs in intervention design, through partnership with community members. Most of the women enrolled in Madres para la Salud were born in Mexico, largely never or unemployed and resided among the highest crime neighborhoods with poor access to resources. We developed recruitment and retention strategies that characterized social marketing strategies that employed a culturally relevant, consumer driven and problem-specific design. Cost and benefit of program participation, consumer-derived motivation and segmentation strategies considered the development transition of the young Latinas as well as cultural and neighborhood barriers that impacted retention are described.

  12. Surgeon Reported Outcome Measure for Spine Trauma an International Expert Survey Identifying Parameters Relevant for The Outcome of Subaxial Cervical Spine Injuries

    NARCIS (Netherlands)

    Sadiqi, Said; Verlaan, Jorrit Jan; Lehr, A. M.; Dvorak, Marcel F.; Kandziora, Frank; Rajasekaran, S.; Schnake, Klaus J.; Vaccaro, Alexander R.; Oner, F. C.

    2016-01-01

    STUDY DESIGN.: International web-based survey OBJECTIVE.: To identify clinical and radiological parameters that spine surgeons consider most relevant when evaluating clinical and functional outcomes of subaxial cervical spine trauma patients. SUMMARY OF BACKGROUND DATA.: While an outcome instrument

  13. DARK ENERGY AND KEY PHYSICAL PARAMETERS OF CLUSTERS OF GALAXIES

    Directory of Open Access Journals (Sweden)

    Gennady S. Bisnovatyi-Kogan

    2013-12-01

    Full Text Available We study physics of clusters of galaxies embedded in the cosmic dark energy background. The equilibrium and stability of polytropic spheres with equation of state of the matter             P = Kpγ, γ = 1 + 1/n, in presence of a non-zero cosmological constant is investigated. The equilibrium state exists only for central densities p0 larger than the critical value pc and there are no static solutions at p0

  14. Edge Plasma Physics Issues for the Fusion Advanced Studies Torus (FAST) in Reactor Relevant Conditions

    International Nuclear Information System (INIS)

    Maddaluno, G.; Pericoli Ridolfini, V.; Apicella, M.L.; Calabro, G.; Crisanti, F.; Cucchiaro, A.; Ramogida, G.; Zagorski, R.

    2008-01-01

    The issue of First wall materials and compatibility with ITER /DEMO relevant plasmas is among the RD missions for possible new European plasma fusion devices that the FAST project will address. FAST can operate with ITER relevant values of P/R (up to 22 MW/m, against the ITER 24 MW/m, inclusive of the α particles power), thanks to its compactness; thus it can investigate the physics of large heat loads on divertor plates. The FAST divertor will be made of bulk W tiles, for basic operations, but also fully toroidal divertor targets made of liquid lithium (L-Li) are foreseen. To have reliable predictions of the thermal loads on the divertor plates and of the core plasma purity a number of numerical self-consistent simulations have been made for the H-mode and steady-state scenario by using the code COREDIV. This code, already validated in the past on experimental data (namely JET, FTU, Textor), is able to describe self-consistently the core and edge plasma in a tokamak device by imposing the continuity of energy and particle fluxes and of particle densities and temperatures at the separatrix. In the present work the results of such calculations will be illustrated, including heat loads on the divertor. The overall picture shows that, marginally in the intermediate and, necessarily in the high density H-mode scenarios ( e >=2 and 5·10 20 m -3 respectively), impurity seeding should be foreseen with W as target material: however, only a small amount of Ar (0.03% atomic concentration), not affecting the core purity, is sufficient to maintain the divertor peak loads below 18 MW/m 2 , that represents the safety limit for the W mono block technology, presently accepted for the ITER divertor tiles. Li always needs additional impurities for decreasing divertor heat loads, the Z eff value being ≤ than 1.8. At low plasma densities (but ≥ 1.3·10 20 m -3 ), typical of steady state regimes, W by alone is effective in dissipating the input power by radiative losses, without

  15. Physical properties of neem (Azadirachta indica seeds and kernels relevant in the design of processing machineries

    Directory of Open Access Journals (Sweden)

    A. A. Balami

    2014-08-01

    Full Text Available This study was undertaken to determine some physical properties of neem seeds and kernels such as axial dimensions, true density, bulk density, surface area, sphericity, moisture content, coefficient of friction, angle of repose and porosity that are relevant in the design of processing machineries. Results shows that the seeds and kernels have major, intermediate and minor diameter values of 13.641.15 mm, 6.800.41 mm and 5.540.44 mm and 9.321.13 mm, 4.320.63 mm and 3.380.35 mm respectively. The true density, bulk density, surface areas and the sphericity determined were 379.0015.16 kg/m3, 39.2930.001 kg/m3, 169.9331.15 mm2, 0.640.043 for the seed while for the kernel were 930.038.53 kg/m3, 534.8910.99 kg/m3, 70.6313.98 mm2, 0.610.044 respectively at an average moisture content of 13.80 % for the seed and 11.9 % for the kernel on wet basis. The coefficient of friction determined on three different structural surfaces namely plywood, glass and mild steel for the seeds were 0.38, 0.42 and 0.33 respectively at an angle of repose of 34.52o while that of the kernels were 0.49, 0.56 and 0.43 respectively at an angle of repose of 42.47°. The mean porosity obtained for the seed and kernel were 89.62 % and 42.47 % respectively.

  16. Improving the GIS-DRP Approach by Means of DelineatingRunoff Characteristics with New Discharge Relevant Parameters

    Directory of Open Access Journals (Sweden)

    Marco Hümann

    2013-01-01

    Full Text Available At present it is common to use geographic information system (GIS applications to assess runoff generation. One of these GIS-based tools to generate maps of dominant runoff processes is the so called GIS-DRP approach. The tool, which has been developed mainly based on agricultural areas, uses commonly available input data like a digital elevation model (DEM, geological information as well as land use information. The aim of this study is to test, validate and improve this GIS-DRP method for forested and silviculture areas. Hence, soil-hydrologic investigations and several mapping techniques of dominant runoff processes were conducted on 25 test-plots in four forested catchments in Rhineland-Palatinate (Germany and the Grand Duchy of Luxembourg. By comparing the results of the mapping techniques and those of the test plots, weak points in the original GIS-DRP method were detected. Subsequently, it was possible to enhance the GIS-DRP approach by incorporating new discharge relevant parameters like topsoil sealing, extreme weather events and semipermeability of the substratum. Moreover, the improved GIS-DRP approach can be widely used in different landscapes and for different fields of application. The adapted method can now support foresters and decision makers in forestry planning, answer questions concerning the landscape water balance and peripheral water retention or provide extra information for sustainable forest planning in times of a changing climate.

  17. Practice Parameter for the Psychiatric Assessment and Management of Physically Ill Children and Adolescents

    Science.gov (United States)

    Journal of the American Academy of Child & Adolescent Psychiatry, 2009

    2009-01-01

    An introduction for any medical health clinician on the knowledge and skills that are needed for the psychiatric assessment and management of physically ill children and adolescents is presented. These parameters are presented to assist clinicians in psychiatric decision making.

  18. Complex evaluation of student‘s physical activity by physical health, physical fitness and body composition parameters

    OpenAIRE

    Šiupšinskas, Laimonas

    2007-01-01

    Physical activity level of students is decreasing. Students are specific population group with similar patterns of habitual physical activity influenced by study process. That formed requirement to search for a new ways to assess physical activity of the students indirectly. Offered method assesses level of physical health, measures physical fitness and evaluates body composition. The aim of the study is to evaluate indirectly measured health-enhanced physical activity of the students by phys...

  19. Physically Active Men Show Better Semen Parameters than Their Sedentary Counterparts.

    Science.gov (United States)

    Lalinde-Acevedo, Paula C; Mayorga-Torres, B Jose Manuel; Agarwal, Ashok; du Plessis, Stefan S; Ahmad, Gulfam; Cadavid, Ángela P; Cardona Maya, Walter D

    2017-10-01

    The quality of semen depends upon several factors such as environment, life style, physical activity, age, and occupation. The aim of this study was to analyze and compare the conventional and functional semen parameters in men practicing vigorous physical activity to those of sedentary men. In this descriptive cross-sectional study, semen samples of 17 physically active men and 15 sedentary men were collected for analysis. Semen analysis was performed according to the World Health Organization (WHO) guidelines, while functional parameters were evaluated by flow cytometry. Results showed that several semen parameters (semen volume, viability, progressive motility, total motility, normal morphology, and moribund cells) were superior in the physically active group in comparison with the sedentary group. Semen parameters such as viability, progressive motility and total motility, as well as the percentage of moribund spermatozoa were significantly different between both groups. However, sperm DNA damage, lipid peroxidation and mitochondrial potential were not significantly different among the groups. Nevertheless, the physical activity shows better semen parameters than sedentary group. Taken together, our results demonstrate that regular physical activity has beneficial impact in sperm fertility parameters and such a life style can enhance the fertility status of men. Copyright© by Royan Institute. All rights reserved.

  20. Selecting relevant and feasible measurement instruments for the revised Dutch clinical practice guideline for physical therapy in patients after stroke

    NARCIS (Netherlands)

    Otterman, Nicoline; Veerbeek, Janne; Schiemanck, Sven; van der Wees, Philip; Nollet, Frans; Kwakkel, Gert

    2017-01-01

    Purpose: To select relevant and feasible instruments for the revision of the Dutch clinical practice guideline for physical therapy in patients with stroke. Methods: In this implementation study a comprehensive proposal for ICF categories and matching instruments was developed, based on reliability

  1. Selecting relevant and feasible measurement instruments for the revised Dutch clinical practice guideline for physical therapy in patients after stroke

    NARCIS (Netherlands)

    Otterman, N.; Veerbeek, J.; Schiemanck, S.; Wees, P.J. van der; Nollet, F.; Kwakkel, G.

    2017-01-01

    PURPOSE: To select relevant and feasible instruments for the revision of the Dutch clinical practice guideline for physical therapy in patients with stroke. METHODS: In this implementation study a comprehensive proposal for ICF categories and matching instruments was developed, based on reliability

  2. Prediction of chemical, physical and sensory data from process parameters for frozen cod using multivariate analysis

    DEFF Research Database (Denmark)

    Bechmann, Iben Ellegaard; Jensen, H.S.; Bøknæs, Niels

    1998-01-01

    Physical, chemical and sensory quality parameters were determined for 115 cod (Gadus morhua) samples stored under varying frozen storage conditions. Five different process parameters (period of frozen storage, frozen storage. temperature, place of catch, season for catching and state of rigor) were...... varied systematically at two levels. The data obtained were evaluated using the multivariate methods, principal component analysis (PCA) and partial least squares (PLS) regression. The PCA models were used to identify which process parameters were actually most important for the quality of the frozen cod....... PLS models that were able to predict the physical, chemical and sensory quality parameters from the process parameters of the frozen raw material were generated. The prediction abilities of the PLS models were good enough to give reasonable results even when the process parameters were characterised...

  3. Soil physical properties influencing the fitting parameters in Philip and Kostiakov infiltration models

    International Nuclear Information System (INIS)

    Mbagwu, J.S.C.

    1994-05-01

    Among the many models developed for monitoring the infiltration process those of Philip and Kostiakov have been studied in detail because of their simplicity and the ease of estimating their fitting parameters. The important soil physical factors influencing the fitting parameters in these infiltration models are reported in this study. The results of the study show that the single most important soil property affecting the fitting parameters in these models is the effective porosity. 36 refs, 2 figs, 5 tabs

  4. Physically Active Men Show Better Semen Parameters than Their Sedentary Counterparts

    OpenAIRE

    Lalinde-Acevedo, Paula C.; Mayorga-Torres, B. Jose Manuel; Agarwal, Ashok; du Plessis, Stefan S.; Ahmad, Gulfam; Cadavid, Ángela P.; Cardona Maya, Walter D.

    2017-01-01

    Background The quality of semen depends upon several factors such as environment, life style, physical activity, age, and occupation. The aim of this study was to analyze and compare the conventional and functional semen parameters in men practicing vigorous physical activity to those of sedentary men. Materials and Methods In this descriptive cross-sectional study, semen samples of 17 physically active men and 15 sedentary men were collected for analysis. Semen analysis was performe...

  5. Cars and Kinetic Energy--Some Simple Physics with Real-World Relevance

    Science.gov (United States)

    Parthasarathy, Raghuveer

    2012-01-01

    Understanding energy usage is crucial to understanding modern civilization, as well as many of the challenges it faces. Energy-related issues also offer real-world examples of important physical concepts, and as such have been the focus of several articles in "The Physics Teacher" in the past few decades (e.g., Refs. 1-5, noted further below).…

  6. Dispositional optimism and physical wellbeing: the relevance of culture, gender, and socioeconomic status.

    Science.gov (United States)

    Khallad, Yacoub

    2013-01-01

    The present study examined the relationship between dispositional optimism and physical wellbeing (as reflected in physical symptom reporting) in two groups of American and Jordanian college students. It also assessed moderation effects of culture, gender, and socioeconomic status (SES). Participants were administered a questionnaire consisting of items pertaining to dispositional optimism (as measured by the Revised Life Orientation Test, LOT-R) along with items assessing physical symptom reporting and sociodemographic factors (e.g., gender, socioeconomic status). The results revealed significant negative correlations between dispositional optimism and physical symptom reporting for both American and Jordanian participants, although the magnitude of the correlation for the American group was noticeably larger than that for the Jordanian group. The results also showed that women, especially Jordanians, were more likely than men to report physical symptoms. Among Jordanians, physical symptom reporting was more common among those of lower SES. No statistically significant differences in physical symptom reporting were found between American men and women or between the two cultural groups. Multiple regression analyses revealed no statistically significant interactions between optimism and cultural background, optimism and gender, or optimism and SES. Overall, the results suggest that optimism is the factor most predictive of physical symptom reporting, followed by SES and gender. These results corroborate previous findings on the relationship between dispositional optimism and physical wellbeing, and point to crosscultural differences in relationship patterns. These differences suggest that although personality characteristics such as optimism may play an important role in the physical wellbeing of both Western and non-Western groups, the influence of sociodemographic factors such as gender and SES and their interaction with cultural variables must not be overlooked.

  7. Characterization of parameters and strategies used by physical therapists in difficult mechanical ventilation weaning

    Directory of Open Access Journals (Sweden)

    Fabíola Maria Sabino Meireles

    2013-03-01

    Full Text Available Objective: To characterize the main strategies and parameters used by physical therapists in difficult mechanical ventilation weaning. Methods: Cross-sectional study including all the physical therapists working in adult Intensive Care Units in three public hospitals in Fortaleza-CE. A questionnaire with closed questions related to difficult mechanical ventilation weaning was applied, with either one or multiple answers. The data was treated with descriptive and non-parametric analysis. Results: Among the parameters mostly used by the 56 interviewed physical therapists for the difficult weaning, were found: current volume reduction (26 - 46.4% and desaturation during aspiration (17 - 30.4%. It was observed that 38 (67.9% alternate T-tube and continuous positive airway pressure (CPAP as strategies for difficult weaning, and 28 (50% reported reducing the pressure support. There was no statistical difference between the strategies used in the studied hospitals, neither correlation between strategies and parameters. Conclusion: It was found that physical therapists have been performing similar strategies, which are also shown in the literature, but this is not the case with the parameters. The parameters used are not supported by the literature.

  8. Sensitivity analysis of physical/operational parameters in neutron multiplicity counting

    International Nuclear Information System (INIS)

    Peerani, P.; Marin Ferrer, M.

    2007-01-01

    In this paper, we perform a sensitivity study on the influence of various physical and operational parameters on the results of neutron multiplicity counting. The purpose is to have a better understanding of the importance of each component and its contribution to the measurement uncertainty. Then we will be able to determine the optimal conditions for the operational parameters and for detector design and as well to point out weaknesses in the knowledge of critical fundamental nuclear data

  9. Physics-based Inverse Problem to Deduce Marine Atmospheric Boundary Layer Parameters

    Science.gov (United States)

    2017-03-07

    knowledge and capabilities in the use and development of inverse problem techniques to deduce atmospheric parameters. WORK COMPLETED The research completed...please find the Final Technical Report with SF 298 for Dr. Erin E. Hackett’s ONR grant entitled Physics -based Inverse Problem to Deduce Marine...From- To) 07/03/2017 Final Technica l Dec 2012- Dec 2016 4. TITLE AND SUBTITLE 5a. CONTRACT NUMBER Physics -based Inverse Problem to Deduce Marine

  10. Objective image quality parameters of relevance in practice, measured for film-screen combinations - a contribution to quality assurance activities

    International Nuclear Information System (INIS)

    Angerstein, W.; Wolf, M.

    1986-01-01

    Objective measurement of the physico-technical parameters determining the image quality is the fastest and most accurate method of quality testing of the systems. The parameters in case of X-ray intensifying screens are imaging quality, servicable life, and mechanical properties. (orig./DG) [de

  11. Psychological contract breach and employee health: The relevance of unmet obligations for mental and physical health

    Directory of Open Access Journals (Sweden)

    Mareike Reimann

    2017-04-01

    Full Text Available This study examines the effects of psychological contract breach (PCB on employee mental and physical health (SF-12 using a sample of 3,870 employees derived from a German longitudinal linked employer-employee study across various industries. Results of multivariate regression models and mediation analysis suggest that PCB affects both the mental and the physical health of employees but is more threatening to employee mental health. In addition, mental health partly mediates the effects of PCB on physical health. Also, the findings of this study show that the relative importance of obligations not met by employers differs according to the specific contents of the psychological contract. In conclusion, the results of this study support the idea that PCB works as a psychosocial stressor at work that represents a crucial risk to employee health.

  12. Why is GeV physics relevant in the age of the LHC?

    Energy Technology Data Exchange (ETDEWEB)

    Pennington, Michael R. [JLAB

    2014-02-01

    The contribution that Jefferson Lab has made, with its 6 GeV electron beam, and will make, with its 12 GeV upgrade, to our understanding of the way the fundamental interactions work, particularly strong coupling QCD, is outlined. The physics at the GeV scale is essential even in TeV collisions.

  13. Memory for Physical Features of Discourse as a Function of Their Relevance.

    Science.gov (United States)

    Fisher, Ronald P.; Cuervo, Asela

    Memory for sex of the speaker and language of presentation of a spoken message was high and reliably better when the features were instrumental for comprehending the message than when they were not. This suggests that the physical characteristics of an event may be deeply or elaborately encoded when they are meaningful in light of the task…

  14. Critical literature review of relationships between processing parameters and physical properties of particleboard

    Science.gov (United States)

    Myron W. Kelly

    1977-01-01

    The pertinent literature has been reviewed, and the apparent effects of selected processing parameters on the resultant particleboard properties, as generally reported in the literature, have been determined. Resin efficiency, type and level, furnish, and pressing conditions are reviewed for their reported effects on physical, strength, and moisture and dimensional...

  15. Thermodynamic study of fluid in terms of equation of state containing physical parameters

    International Nuclear Information System (INIS)

    Khasare, S. B.

    2015-01-01

    We introduce a simple condition for one mole fluid by considering the thermodynamics of molecules pointing towards the effective potential for the cluster. Efforts are made to estimate new physical parameter f in liquid state using the equation of state containing only two physical parameters such as the hard sphere diameter and binding energy. The temperature dependence of the structural properties and the thermodynamic behavior of the clusters are studied. Computations based on f predict the variation of numbers of particles at the contact point of the molecular cavity (radial distribution function). From the thermodynamic profile of the fluid, the model results are discussed in terms of the cavity due to the closed surface along with suitable energy. The present calculation is based upon the sample thermodynamic data for n-hexanol, such as the ultrasonic wave, density, volume expansion coefficient, and ratio of specific heat in the liquid state, and it is consistent with the thermodynamic relations containing physical parameters such as size and energy. Since the data is restricted to n-hexanol, we avoid giving the physical meaning of f, which is the key parameter studied in the present work. (paper)

  16. Influence of buildings geometrical and physical parameters on thermal cooling load

    International Nuclear Information System (INIS)

    Melo, C.

    1980-09-01

    A more accurate method to evaluate the thermal cooling load in buildings and to analyze the influence of geometrical and physical parameters on air conditioning calculations is presented. The sensitivity of the cooling load, considering the thermal capacity of the materials, was simulated in a computer for several different situations. (Author) [pt

  17. Fast neutron reactor noise analysis: beginning failure detection and physical parameter estimation

    International Nuclear Information System (INIS)

    Le Guillou, G.

    1975-01-01

    The analysis of the signals fluctuations coming from a power nuclear reactor (a breeder), by correlation methods and spectral analysis has two principal applications: on line estimation of physical parameters (reactivity coefficients); beginning failures (little boiling, abnormal mechanic vibrations). These two applications give important informations to the reactor core control and permit a good diagnosis [fr

  18. Marching on in anything: solving electromagnetic field equations with a varying physical parameter

    NARCIS (Netherlands)

    Tijhuis, A.G.; Zwamborn, A.P.M.; Smith, P.D.; Cloude, S.R.

    2002-01-01

    In this paper, we consider the determination of electromagnetic fields for a (large) number of values of a physical parameter. We restrict ourselves to the case where the linear system originates from one or more integral equations. We apply an iterative procedure based on the minimization of an

  19. Physical Parameters of the Overcontact Binary AH Cnc in the Old Open Cluster M 67

    NARCIS (Netherlands)

    Yakut, K.; Aerts, C.C.

    2006-01-01

    We present a photometric study of the overcontact binary AH Cnc. The CCD observations were done with the Russian-Turkish 1.5 m telescope and the light-curve was solved with the Wilson-Devinney code. The physical parameters of the components have been deduced as M1 = 1.22 Msun,

  20. Methodology and results of investigations of physical parameters of high-temperature reactors

    International Nuclear Information System (INIS)

    Cherepnin, Yu.S.; Chertkov, Yu.B.

    1995-01-01

    A physical investigations of reactors of stand complexes Baikal-1 and IGR have been carrying out more 30 years. Measuring methods of the physical investigations were divided into 2 groups: 1) methods for measuring of reactivity effects; 2) methods for measuring relative and absolute values of neutron flux and power release. The physical investigations on the reactors IVG-1 and IGR were carryied out under following conditions: during physical starts-up of regular variants of reactor cores; during energy starts-up of the reactors; before beginning of new loop chanel tests of the reactors; during research hot starts-up of the reactors the physical parameters were controled. The most full and authentic information about studied reactor have been providing by physical investigations. In 1984 physical investigations were carryied out on the IGR reactor and then the hot start-up of the mostest power and mostest large on fuel loading loop chanel was carryied out. This chanel contained 6 fuel assemblies with the summary fuel loading 3,06 kilogrammes of uranium and it was calculated for power equal to 20 MW. In 1988 the physical investigations for selection of project process chanels destined for new water cooled reactor core were carryied out. In 1993 the neutron-physical calculation on possibility of tests for the rector Nerva fuel element was carryied out. 9 refs., 4 figs

  1. Characterization of basic physical properties of Sb2Se3 and its relevance for photovoltaics

    Institute of Scientific and Technical Information of China (English)

    Chao CHEN; Matthew C.BEARD; Jiang TANG; David C.BOBELA; Ye YANG; Shuaicheng LU; Kai ZENG; Cong GE; Bo YANG; Liang GAO; Yang ZHAO

    2017-01-01

    Antimony selenide (Sb2Se3) is a promising absorber material for thin film photovoltaics because of its attractive material,optical and electrical properties.In recent years,the power conversion efficiency (PCE) of Sb2Se3 thin film solar cells has gradually enhanced to 5.6%.In this article,we systematically studied the basic physical properties of Sb2Se3 such as dielectric constant,anisotropic mobility,carrier lifetime,diffusion length,defect depth,defect density and optical band tail states.We believe such a comprehensive characterization of the basic physical properties of Sb2Se3 lays a solid foundation for further optimization of solar device performance.

  2. Early-Life Effects on Adult Physical Activity: Concepts, Relevance, and Experimental Approaches.

    Science.gov (United States)

    Garland, Theodore; Cadney, Marcell D; Waterland, Robert A

    Locomotion is a defining characteristic of animal life and plays a crucial role in most behaviors. Locomotion involves physical activity, which can have far-reaching effects on physiology and neurobiology, both acutely and chronically. In human populations and in laboratory rodents, higher levels of physical activity are generally associated with positive health outcomes, although excessive exercise can have adverse consequences. Whether and how such relationships occur in wild animals is unknown. Behavioral variation among individuals arises from genetic and environmental factors and their interactions as well as from developmental programming (persistent effects of early-life environment). Although tremendous progress has been made in identifying genetic and environmental influences on individual differences in behavior, early-life effects are not well understood. Early-life effects can in some cases persist across multiple generations following a single exposure and, in principle, may constrain or facilitate the rate of evolution at multiple levels of biological organization. Understanding the mechanisms of such transgenerational effects (e.g., exposure to stress hormones in utero, inherited epigenetic alterations) may prove crucial to explaining unexpected and/or sex-specific responses to selection as well as limits to adaptation. One area receiving increased attention is early-life effects on adult physical activity. Correlational data from epidemiological studies suggest that early-life nutritional stress can (adversely) affect adult human activity levels and associated physiological traits (e.g., body composition, metabolic health). The few existing studies of laboratory rodents demonstrate that both maternal and early-life exercise can affect adult levels of physical activity and related phenotypes. Going forward, rodents offer many opportunities for experimental studies of (multigenerational) early-life effects, including studies that use maternal

  3. The Hypertrophic Marchigiana: physical and biochemical parameters for meat quality evaluation

    Directory of Open Access Journals (Sweden)

    F. M. Sarti

    2010-04-01

    Full Text Available The aim of this study was to evaluate the meat quality of double muscled Marchigiana young bulls characterized by different genotypes for the hypertrophy: normal and mutated (heterozygous. Calpain and calpastatin activities were determined to verify the state of aging meat on a sample of Longissimus thoracis muscle (XIII thoracic rib taken at slaughtering (0h and after 24 hours (24h. After 14 days of aging, another sample of muscle was taken to evaluate physical and chemical parameters of meat quality. The results showed a better meat quality of mutated animals respect normal animals. Another interesting result was the correlation between the biochemical parameters and some physical parameters, such as WBS (Warner Bratzler Shear Force, CL (Cooking loss. These results showed the relationship between the proteolytic activity of calpain system and meat tenderness.

  4. Assessment of basic physical parameters of current Canadian-American National Hockey League (NHL ice hockey players

    Directory of Open Access Journals (Sweden)

    Martin Sigmund

    2016-03-01

    Full Text Available Background: Physical parameters represent an important part of the structure of sports performance and significantly contribute to the overall performance of an ice hockey player. Basic physical parameters are also an essential part of a comprehensive player assessment both during the initial NHL draft and further stages of a professional career. For an objective assessment it is desirable to know the current condition of development of monitored somatic parameters with regard to the sports discipline, performance level and gaming position. Objective: The aim of this study was to analyze and present the level of development of basic physical characteristics [Body Height (BH and Body Weight (BW] in current ice hockey players in the Canadian-American NHL, also with respect to various gaming positions. Another aim is to compare the results with relevant data of elite ice hockey players around the world. Methods: The data of 751 ice hockey players (age range: 18-43 years; 100% male from NHL (2014/2015 season are analyzed (goalkeepers, n = 67; defenders, n = 237; forwards, n = 447. Statistical data processing was performed using a single factor ANOVA and Fisher's (LSD post hoc test. The level of statistical significance was tested at a level of p ≤ .05; p ≤ .01. Effect size was expressed according to Cohen's d. Results: Current levels of monitored parameters of NHL players represent the values: BH = 186.0 ± 5.3 cm, BW = 91.7 ± 6.9 kg. Significant differences among positions were found for the BH (goalkeepers > defenders > forwards and BW (defenders > goalkeepers > forwards. Differences among forwards positions were also found for the BH (left wings > right wings > centers and BW (left wings > right wings > centers. Conclusion: The observed values represent the current level of basic physical parameters in professional ice hockey players in the NHL and can be considered

  5. Electronic structures and relevant physical properties of Ni2MnGa alloy films

    International Nuclear Information System (INIS)

    Kim, K. W.; Kim, J. B.; Huang, M. D.; Lee, N. N.; Lee, Y. P.; Kudryavtsev, Y. V.; Rhee, J. Y.

    2004-01-01

    The electronic structures and physical properties of the ordered and disordered Ni 2 MnGa alloy films were investigated in this study. Ordered and disordered Ni 2 MnGa alloy films were prepared by flash evaporation onto substrates maintained at 720 K and 150 K, respectively. The results show that the ordered films behave in nearly the same way as the bulk Ni 2 MnGa ferromagnetic shape-memory alloy, including the martensitic transformation at 200 K. It was also revealed that the film deposition onto substrates cooled by liquid nitrogen leads to the formation of a substantially-disordered or an amorphous phase which is not ferromagnetically ordered at room temperature. An annealing of such an amorphous film restores its crystallinity and also recovers the ferromagnetic order. It was also clarified how the structural disordering in the films influences the physical properties, including the loss of ferromagnetism in the disordered films, by performing electronic-structure calculations and a photoemission study.

  6. Efimov Physics and the Three-Body Parameter within a Two-Channel Framework

    DEFF Research Database (Denmark)

    Sørensen, Peder Klokmose; V. Fedorov, D.; S. Jensen, A.

    2012-01-01

    scaling laws. We recover known results for broad Feshbach resonances with small effective range, whereas in the case of narrow resonances we find a distinct non-monotonic behavior of the threshold at which the lowest Efimov trimer merges with the three-body continuum. To address the issue of the physical...... origin of the three-body parameter we provide a physically clear model for the relation between three-body physics and typical two-body atom-atom interactions. Our results demonstrate that experimental information from narrow Feshbach resonances and/or mixed systems are of vital importance to pin down...... the relation of two- and three-body physics in atomic systems....

  7. Merging physical parameters and laboratory subjective ratings for the soundscape assessment of urban squares.

    Science.gov (United States)

    Brambilla, Giovanni; Maffei, Luigi; Di Gabriele, Maria; Gallo, Veronica

    2013-07-01

    An experimental study was carried out in 20 squares in the center of Rome, covering a wide range of different uses, sonic environments, geometry, and architectural styles. Soundwalks along the perimeter of each square were performed during daylight and weekdays taking binaural and video recordings, as well as spot measurements of illuminance. The cluster analysis performed on the physical parameters, not only acoustic, provided two clusters that are in satisfactory agreement with the "a priori" classification. Applying the principal component analysis (PCA) to five physical parameters, two main components were obtained which might be associated to two environmental features, namely, "chaotic/calm" and "open/enclosed." On the basis of these two features, six squares were selected for the laboratory audio-video tests where 32 subjects took part filling in a questionnaire. The PCA performed on the subjective ratings on the sonic environment showed two main components which might be associated to two emotional meanings, namely, "calmness" and "vibrancy." The linear regression modeling between five objective parameters and the mean value of subjective ratings on chaotic/calm and enclosed/open attributes showed a good correlation. Notwithstanding these interesting results being limited to the specific data set, it is worth pointing out that the complexity of the soundscape quality assessment can be more comprehensively examined merging the field measurements of physical parameters with the subjective ratings provided by field and/or laboratory tests.

  8. Effects of three types of physical activity on reduction of metabolic parameters involved in cardiovascular risk

    Directory of Open Access Journals (Sweden)

    Petrović-Oggiano Gordana

    2009-01-01

    Full Text Available The aim of present study was to investigate the effects of three different types of physical activity on reduction of the metabolic parameters mainly responsible for cardiovascular diseases. This prospective-intervention study was performed at the 'ČIGOTA' Thyroid Institute on Mt. Zlatibor (Serbia between August 2004 and June 2006. Sixty-eight overweight/obese patients aged 40-70 years with hyperlipidemia were divided into three groups according to their weight and overall health. The program of physical workout included: group I - fast walking; group II - gymnastic exercises and specially chosen exercises in the swimming pool; and group III - combined physical training of higher intensity and greater length. All patients were also on a special reduced diet of 1000 kcal per day, the AHA step-2 diet. We monitored the body mass index, body composition, glucose, cholesterol (total, LDL-, and HDL-, and triglycerides before, during, and after the intervention. After 2 and particularly 12 weeks of intervention, a significant improvement of all metabolic parameters was achieved in all three groups of patients. Although most patients completed the study with normal values of all parameters, the most desirable results were achieved in group III (combined exercises with an average energy expenditure of 900 kcal per day. Our research indicates that a specially conceived program of physical activity and diet intervention resulted in significant reduction of cardiovascular risk factors.

  9. Deriving amplification factors from simple site parameters using generalized regression neural networks: implications for relevant site proxies

    Science.gov (United States)

    Boudghene Stambouli, Ahmed; Zendagui, Djawad; Bard, Pierre-Yves; Derras, Boumédiène

    2017-07-01

    Most modern seismic codes account for site effects using an amplification factor (AF) that modifies the rock acceleration response spectra in relation to a "site condition proxy," i.e., a parameter related to the velocity profile at the site under consideration. Therefore, for practical purposes, it is interesting to identify the site parameters that best control the frequency-dependent shape of the AF. The goal of the present study is to provide a quantitative assessment of the performance of various site condition proxies to predict the main AF features, including the often used short- and mid-period amplification factors, Fa and Fv, proposed by Borcherdt (in Earthq Spectra 10:617-653, 1994). In this context, the linear, viscoelastic responses of a set of 858 actual soil columns from Japan, the USA, and Europe are computed for a set of 14 real accelerograms with varying frequency contents. The correlation between the corresponding site-specific average amplification factors and several site proxies (considered alone or as multiple combinations) is analyzed using the generalized regression neural network (GRNN). The performance of each site proxy combination is assessed through the variance reduction with respect to the initial amplification factor variability of the 858 profiles. Both the whole period range and specific short- and mid-period ranges associated with the Borcherdt factors Fa and Fv are considered. The actual amplification factor of an arbitrary soil profile is found to be satisfactorily approximated with a limited number of site proxies (4-6). As the usual code practice implies a lower number of site proxies (generally one, sometimes two), a sensitivity analysis is conducted to identify the "best performing" site parameters. The best one is the overall velocity contrast between underlying bedrock and minimum velocity in the soil column. Because these are the most difficult and expensive parameters to measure, especially for thick deposits, other

  10. Transition to a Source with Modified Physical Parameters by Energy Supply or Using an External Force

    Science.gov (United States)

    Kucherov, A. N.

    2017-11-01

    A study has been made of the possibility for the physical parameters of a source/sink, i.e., for the enthalpy, temperature, total pressure, maximum velocity, and minimum dimension, at a constant radial Mach number to be changed by energy or force action on the gas in a bounded zone. It has been shown that the parameters can be controlled at a subsonic, supersonic, and transonic (sonic in the limit) radial Mach number. In the updated source/sink, all versions of a vortex-source combination can be implemented: into a vacuum, out of a vacuum, into a submerged space, and out of a submerged space, partially or fully.

  11. Geometric constraints on the space of N = 2 SCFTs. Part I: physical constraints on relevant deformations

    Science.gov (United States)

    Argyres, Philip; Lotito, Matteo; Lü, Yongchao; Martone, Mario

    2018-02-01

    We initiate a systematic study of four dimensional N = 2 superconformal field theories (SCFTs) based on the analysis of their Coulomb branch geometries. Because these SCFTs are not uniquely characterized by their scale-invariant Coulomb branch geometries we also need information on their deformations. We construct all inequivalent such deformations preserving N = 2 supersymmetry and additional physical consistency conditions in the rank 1 case. These not only include all the ones previously predicted by S-duality, but also 16 additional deformations satisfying all the known N = 2 low energy consistency conditions. All but two of these additonal deformations have recently been identified with new rank 1 SCFTs; these identifications are briefly reviewed. Some novel ingredients which are important for this study include: a discussion of RG-flows in the presence of a moduli space of vacua; a classification of local N = 2 supersymmetry-preserving deformations of unitary N = 2 SCFTs; and an analysis of charge normalizations and the Dirac quantization condition on Coulomb branches. This paper is the first in a series of three. The second paper [1] gives the details of the explicit construction of the Coulomb branch geometries discussed here, while the third [2] discusses the computation of central charges of the associated SCFTs.

  12. Service-learning in Higher Education Relevant to the Promotion of Physical Activity, Healthful Eating, and Prevention of Obesity.

    Science.gov (United States)

    Rosenkranz, Richard R

    2012-10-01

    Service-learning is a type of experiential teaching and learning strategy combining classroom instruction and meaningful community service and guided activities for reflection. This educational approach has been used frequently in higher education settings, including an array of disciplines such as medicine, theology, public health, physical education, nutrition, psychology, anthropology, and sociology. The purpose of the present review paper was to provide guidance on the use of service-learning within higher education, relevant to the preventive medicine and public health topics of healthful eating, physical activity, and obesity prevention. In service-learning, coursework is structured to address community needs, and to benefit students through the real-world application of knowledge. The benefits for students include positive impacts on social skills, empathy, awareness, understanding, and concern regarding community issues, plus greater confidence and skills to work with diverse populations, increased awareness of community resources, improved motivation, and enhanced knowledge. Educational institutions may also benefit through improved "town and gown" relations, as strong ties, partnerships, and mutually beneficial activities take place. The present literature review describes several service-learning applications such as nutrition education for kids, dietary improvement for seniors, foodservice recipe modification on a college campus, an intergenerational physical activity program for nursing home residents, motor skill development in kindergarteners, organized elementary school recess physical activities, health education, and obesity prevention in children. From this review, service-learning appears to have great potential as a flexible component of academic coursework in the areas of preventive medicine and public health.

  13. THE EFFECTS OF PHYSICAL TRAINING ON CARDIOVASCULAR PARAMETERS AND REDUCTION OF VISCERAL FATTY TISSUE

    Directory of Open Access Journals (Sweden)

    Todorka Savic

    2007-12-01

    Full Text Available Regular physical activity and good physical condition are widely accepted as factors that reduce all-cause mortality and improve a number of health outcomes.The aim of this study was to investigate the effects of aerobic exercise training on cardiovascular parameters and reduction of visceral obesity in patients with stable coronary artery disease participating in a cardiovascular rehabilitation exercise program. Fifty-two patients with stable coronary heart disease who had been accepted into the outpatient Phase II cardiovascular rehabilitation program at the Institute for Treatment and Rehabilitation of Cardiovascular Diseases Niska Banja, Nis, Serbia,were recruited for this study. All patients were divided into two groups: group with stable coronary heart disease who had regular aerobic physical training during 6weeks and control without physical training. There were not significant differences in body weight, body mass index, waist circumference and waist /hip ratio in start and at the end of physical training program. Physical training did not reduce the above mentioned parameters after 6 weeks. There were not significant differences in systolic and diastolic blood pressure at the beginning and at the end of the observed period.In group with physical training, a significant reduction of systolic and diastolic blood pressure after cardiovascular rehabilitation were reported (p<0.05. In patients with moderate aerobic physical training, a significant decrease in the heart rate was registered after the 6-week follow-up (p<0.05, while heart rate was significantly lower in this group compared to group with sedentary lifestyle (p<0.05. The effects of the 6-week cardiovascular rehabilitation on lipid parameters is visible only in slight reduction of triglyceride values in group with physical training (p<0.05. The concentration of triglycerides were significantly lower in this group compared to sedentary patients after the 6-week follow-up (p<0

  14. Chemical Abundances and Physical Parameters of H II Regions in the Magellanic Clouds

    Science.gov (United States)

    Reyes, R. E. C.

    The chemical abundances and physical parameters of H II regions are important pa rameters to determine in order to understand how stars and galaxies evolve. The Magellanic Clouds offer us a unique oportunity to persue such studies in low metallicity galaxies. In this contribution we present the results of the photoionization modeling of 5 H II regions in each of the Large Magellanic Cloud (LMC) and Small Magellanic Cloud (SMC) sys tems. Optical data were collected from the literature, complemented by our own observa tions (Carlos Reyes et al. 1998), including UV spectra from the new IUE data ban k and infrared fluxes from the IRAS satellite. The chemical abundances of He, C, N, O, Ne, S, Ar and physical parameters like the densities, the ionized masses, the luminosities, the ionization temperatures , the filling factor and optical depth are determined. A comparison of the abundances of these HII regions with those of typical planetary nebulae and supergiants stars is also presented.

  15. Male reproductive system parameters in a two-generation reproduction study of ammonium perfluorooctanoate in rats and human relevance.

    Science.gov (United States)

    York, Raymond G; Kennedy, Gerald L; Olsen, Geary W; Butenhoff, John L

    2010-04-30

    Ammonium perfluorooctanoate (ammonium PFOA) is an industrial surfactant that has been used primarily as a processing aid in the manufacture of fluoropolymers. The environmental and metabolic stability of PFOA together with its presence in human blood and long elimination half-life have led to extensive toxicological studies in laboratory animals. Two recent publications based on observations from the Danish general population have reported: (1) a negative association between serum concentrations of PFOA in young adult males and their sperm counts and (2) a positive association among women with time to pregnancy. A two-generation reproduction study in rats was previously published (2004) in which no effects on functional reproduction were observed at doses up to 30mg ammonium PFOA/kg body weight. The article contained the simple statement: "In males, fertility was normal as were all sperm parameters". In order to place the recent human epidemiological data in perspective, herein we provide the detailed male reproductive parameters from that study, including sperm quality and testicular histopathology. Sperm parameters in rats from the two-generation study in all ammonium PFOA treatment groups were unaffected by treatment with ammonium PFOA. These observations reflected the normal fertility observations in these males. No evidence of altered testicular and sperm structure and function was observed in ammonium PFOA-treated rats whose mean group serum PFOA concentrations ranged up to approximately 50,000ng/mL. Given that median serum PFOA in the Danish cohorts was approximately 5ng/mL, it seems unlikely that concentrations observed in the general population, including those recently reported in Danish general population, could be associated causally with a real decrement in sperm number and quality.

  16. Identification of AE Bursts by Classification of Physical and Statistical Parameters

    International Nuclear Information System (INIS)

    Mieza, J.I.; Oliveto, M.E.; Lopez Pumarega, M.I.; Armeite, M.; Ruzzante, J.E.; Piotrkowski, R.

    2005-01-01

    Physical and statistical parameters obtained with the Principal Components method, extracted from Acoustic Emission bursts coming from triaxial deformation tests were analyzed. The samples came from seamless steel tubes used in the petroleum industry and some of them were provided with a protective coating. The purpose of our work was to identify bursts originated in the breakage of the coating, from those originated in damage mechanisms in the bulk steel matrix. Analysis was performed by statistical distributions, fractal analysis and clustering methods

  17. Impact of moderator history on physics parameters in pressurized water reactors

    International Nuclear Information System (INIS)

    Mosteller, R.D.

    1988-01-01

    The magnitude of differential reactivity effects that result from spectral differences in different portions of a pressurized water (PWR) core is studied, and it is shown that these effects can be correlated very well with the local moderator history. The impact of these differences on physics parameters such as axial offset, isothermal moderator temperature coefficient, and differential control rod worth is shown to be significant for two PWRs of considerably different design

  18. Chemical-physical parameters of atmospheric precipitations in the Pisa urban area

    International Nuclear Information System (INIS)

    Paradossi, C.; Marchini, F.

    1998-01-01

    In the work the major chemical-physical parameters of the rain collected in May 1992 - May 1993 period in Pisa are studied and discussed. The ph analysis was particular interesting. Indeed sometimes it reached values between 4.5 and 5.0. Also the ions examined although they did not reach values supposed to cause damage, were subjected to monthly variations. This paper confirms previously results. Pisa although not being considered an industrial area is subjected to pollutant acid rains [it

  19. Stochasticity effects on derivation of physical parameters of unresolved star clusters

    OpenAIRE

    de Meulenaer, Philippe; Narbutis, Donatas; Mineikis, Tadas; Vansevičius, Vladas

    2013-01-01

    We developed a method for a fast modeling of broad-band UBVRI integrated magnitudes of unresolved star clusters and used it to derive their physical parameters (age, mass, and extinction). The method was applied on M33 galaxy cluster sample and consistency of ages and masses derived from unresolved observations with the values derived from resolved stellar photometry was demonstrated. We found that interstellar extinction causes minor age-extinction degeneracy for the studied sample due to a ...

  20. A simplified model for predicting malaria entomologic inoculation rates based on entomologic and parasitologic parameters relevant to control.

    Science.gov (United States)

    Killeen, G F; McKenzie, F E; Foy, B D; Schieffelin, C; Billingsley, P F; Beier, J C

    2000-05-01

    Malaria transmission intensity is modeled from the starting perspective of individual vector mosquitoes and is expressed directly as the entomologic inoculation rate (EIR). The potential of individual mosquitoes to transmit malaria during their lifetime is presented graphically as a function of their feeding cycle length and survival, human biting preferences, and the parasite sporogonic incubation period. The EIR is then calculated as the product of 1) the potential of individual vectors to transmit malaria during their lifetime, 2) vector emergence rate relative to human population size, and 3) the infectiousness of the human population to vectors. Thus, impacts on more than one of these parameters will amplify each other's effects. The EIRs transmitted by the dominant vector species at four malaria-endemic sites from Papua New Guinea, Tanzania, and Nigeria were predicted using field measurements of these characteristics together with human biting rate and human reservoir infectiousness. This model predicted EIRs (+/- SD) that are 1.13 +/- 0.37 (range = 0.84-1.59) times those measured in the field. For these four sites, mosquito emergence rate and lifetime transmission potential were more important determinants of the EIR than human reservoir infectiousness. This model and the input parameters from the four sites allow the potential impacts of various control measures on malaria transmission intensity to be tested under a range of endemic conditions. The model has potential applications for the development and implementation of transmission control measures and for public health education.

  1. PEM fuel cell model and simulation in Matlab–Simulink based on physical parameters

    International Nuclear Information System (INIS)

    Abdin, Z.; Webb, C.J.; Gray, E.MacA.

    2016-01-01

    An advanced PEM fuel cell mathematical model is described and realised in four ancillaries in the Matlab–Simulink environment. Where possible, the model is based on parameters with direct physical meaning, with the aim of going beyond empirically describing the characteristics of the fuel cell. The model can therefore be used to predict enhanced performance owing to, for instance, improved electrode materials, and to relate changes in the measured performance to internal changes affecting influential physical parameters. Some simplifying assumptions make the model fairly light in computational demand and therefore amenable to extension to simulate an entire fuel-cell stack as part of an energy system. Despite these assumptions, the model emulates experimental data well, especially at high current density. The influences of pressure, temperature, humidification and reactant partial pressure on cell performance are explored. The dominating effect of membrane hydration is clearly revealed. - Highlights: • Model based on physical parameters where possible. • Effective binary diffusion modelled in detail on an atomistic basis. • The dominating effect of membrane hydration is clearly revealed. • Documented Simulink model so others can use it. • Conceived as a research tool for exploring enhanced fuel cell performance and diagnosing problems.

  2. Assessing first-order emulator inference for physical parameters in nonlinear mechanistic models

    Science.gov (United States)

    Hooten, Mevin B.; Leeds, William B.; Fiechter, Jerome; Wikle, Christopher K.

    2011-01-01

    We present an approach for estimating physical parameters in nonlinear models that relies on an approximation to the mechanistic model itself for computational efficiency. The proposed methodology is validated and applied in two different modeling scenarios: (a) Simulation and (b) lower trophic level ocean ecosystem model. The approach we develop relies on the ability to predict right singular vectors (resulting from a decomposition of computer model experimental output) based on the computer model input and an experimental set of parameters. Critically, we model the right singular vectors in terms of the model parameters via a nonlinear statistical model. Specifically, we focus our attention on first-order models of these right singular vectors rather than the second-order (covariance) structure.

  3. Changes in various physical/chemical parameters of Pinus pinaster wood after steam explosion pretreatment

    Energy Technology Data Exchange (ETDEWEB)

    Negro, M.J.; Manzanares, P.; Oliva, J.M.; Ballesteros, I.; Ballesteros, M. [Centro de Investigaciones Energeticas, Medioambientales y Tecnologicas, Madrid (Spain). Departamento de Energias Renovables

    2003-09-01

    Steam-explosion process can be satisfactorily used as a pretreatment in ethanol production from lignocellulosic biomass. Traditionally, pretreatment effectiveness is evaluated in terms of hemicellulose solubilization, enzymatic convertibility of cellulosic fraction, and recovery of both polysaccharides. In this study some parameters different from composition (main components) have been evaluated as an alternative tool to characterise the effect of steaming pretreatment on lignocellulosic materials. The effect of the most important variables in steam explosion pretreatment (temperature, residence time and chip size) on various physical/chemical parameters of pine biomass were investigated. Changes in O/C and H/C atomic ratios, colour analysis, elementary composition, water drop penetration time, organic soluble content, cellulose crystallinity index, and thermogravimetric analysis after the pretreatment were evaluated. Furthermore the influence of operational pretreatment variables on all such parameters and their interactions were examined with the Yates' algorithm. (author)

  4. Changes in various physical/chemical parameters of Pinus pinaster wood after steam explosion pretreatment

    International Nuclear Information System (INIS)

    Negro, M.J.; Manzanares, P.; Oliva, J.M.; Ballesteros, I.; Ballesteros, M.

    2003-01-01

    Steam-explosion process can be satisfactorily used as a pretreatment in ethanol production from lignocellulosic biomass. Traditionally, pretreatment effectiveness is evaluated in terms of hemicellulose solubilization, enzymatic convertibility of cellulose fraction, and recovery of both polysaccharides. In this study some parameters different from composition (main components) have been evaluated as an alternative tool to characterise the effect of steaming pretreatment on lignocellulosic materials. The effect of the most important variables in steam explosion pretreatment (temperature, residence time and chip size) on various physical/chemical parameters of pine biomass were investigated. Changes in O/C and H/C atomic ratios, colour analysis, elementary composition, water drop penetration time, organic soluble content, cellulose cristallinity index, and thermogravimetric analysis after the pretreatment were evaluated. Furthermore the influence of operational pretreatment variables on all such parameters and their interactions were examined with the Yates' algorithm

  5. A universal laboratory method for determining physical parameters of radon migration in dry granulated porous media.

    Science.gov (United States)

    Ye, Yong-Jun; Zhang, Yun-Feng; Dai, Xin-Tao; Ding, De-Xin

    2017-10-01

    The particle size and heaped methods of exhalation media have important effects on physical parameters, such as the free radon production rate, porosity, permeability, and radon diffusion coefficient. However, existing methods for determining those parameters are too complex, and time-consuming. In this study, a novel, systematic determining method was proposed based on nuclide decay, radon diffusion migration theory, and the mass conservation law, and an associated experimental device was designed and manufactured. The parameters of uranium ore heap and sandy soil of radon diffusion coefficient (D), free radon production rate (α), media permeability (k), and porosity (ε) were obtained. At the same time, the practicality of the novel determining method was improved over other methods, with the results showing that accuracy was within the acceptable range of experimental error. This novel method will be of significance for the study of radon migration and exhalation in granulated porous media. Copyright © 2017 Elsevier Ltd. All rights reserved.

  6. Research on physical and chemical parameters of coolant in Light-Water Reactors

    Energy Technology Data Exchange (ETDEWEB)

    Reis, Isabela C.; Mesquita, Amir Z., E-mail: icr@cdtn.br, E-mail: amir@cdtn.br [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEM-MG), Belo Horizonte, MG (Brazil)

    2015-07-01

    The coolant radiochemical monitoring of light-water reactors, both power reactor as research reactors is one most important tasks of the system safe operation. The last years have increased the interest in the coolant chemical studying to optimize the process, to minimize the corrosion, to ensure the primary system materials integrity, and to reduce the workers exposure radiation. This paper has the objective to present the development project in Nuclear Technology Development Center (CDTN), which aims to simulate the primary water physical-chemical parameters of light-water-reactors (LWR). Among these parameters may be cited: the temperature, the pressure, the pH, the electric conductivity, and the boron concentration. It is also being studied the adverse effects that these parameters can result in the reactor integrity. The project also aims the mounting of a system to control and monitoring of temperature, electric conductivity, and pH of water in the Installation of Test in Accident Conditions (ITCA), located in the Thermal-Hydraulic Laboratory at CDTN. This facility was widely used in the years 80/90 for commissioning of several components that were installed in Angra 2 containment. In the test, the coolant must reproduce the physical and chemical conditions of the primary. It is therefore fundamental knowledge of the main control parameters of the primary cooling water from PWR reactors. Therefore, this work is contributing, with the knowledge and the reproduction with larger faithfulness of the reactors coolant in the experimental circuits. (author)

  7. Prediction of changes in important physical parameters during composting of separated animal slurry solid fractions

    DEFF Research Database (Denmark)

    Chowdhury, Md Albarune; de Neergaard, Andreas; Jensen, Lars Stoumann

    2014-01-01

    Solid-liquid separation of animal slurry, with solid fractions used for composting, has gained interest recently. However, efficient composting of separated animal slurry solid fractions (SSFs) requires a better understanding of the process dynamics in terms of important physical parameters...... and their interacting physical relationships in the composting matrix. Here we monitored moisture content, bulk density, particle density and air-filled porosity (AFP) during composting of SSF collected from four commercially available solid-liquid separators. Composting was performed in laboratory-scale reactors...... for 30 days (d) under forced aeration and measurements were conducted on the solid samples at the beginning of composting and at 10-d intervals during composting. The results suggest that differences in initial physical properties of SSF influence the development of compost maximum temperatures (40...

  8. Physical parameters and biological effects of the LVR-15 epithermal neutron beam

    International Nuclear Information System (INIS)

    Burian, J.; Marek, M.; Rejchrt, J.; Viererbl, L.; Gambarini, G.; Mares, V.; Vanossi, E.; Judas, L.

    2006-01-01

    Monitoring of the physical and biological properties of the epithermal neutron beam constructed at the multipurpose LVR-15 nuclear reactor for NCT therapy of brain tumors showed that its physical and biological properties are stable in time and independent on an ad hoc reconfiguration of the reactor core before its therapeutic use. Physical parameters were monitored by measurement of the neutron spectrum, neutron profile, fast neutron kerma rate in tissue and photon absorbed dose, the gel dosimetry was used with the group of standard measurement methods. The RBE of the beam, as evaluated by 3 different biological models, including mouse intestine crypt regeneration assay, germinative zones of the immature rat brain and C6 glioma cells in culture, ranged from 1.70 to 1.99. (author)

  9. Studying the physics potential of long-baseline experiments in terms of new sensitivity parameters

    International Nuclear Information System (INIS)

    Singh, Mandip

    2016-01-01

    We investigate physics opportunities to constraint the leptonic CP-violation phase δ_C_P through numerical analysis of working neutrino oscillation probability parameters, in the context of long-baseline experiments. Numerical analysis of two parameters, the “transition probability δ_C_P phase sensitivity parameter (A"M)” and the “CP-violation probability δ_C_P phase sensitivity parameter (A"C"P),” as functions of beam energy and/or baseline have been carried out. It is an elegant technique to broadly analyze different experiments to constrain the δ_C_P phase and also to investigate the mass hierarchy in the leptonic sector. Positive and negative values of the parameter A"C"P, corresponding to either hierarchy in the specific beam energy ranges, could be a very promising way to explore the mass hierarchy and δ_C_P phase. The keys to more robust bounds on the δ_C_P phase are improvements of the involved detection techniques to explore lower energies and relatively long baseline regions with better experimental accuracy.

  10. Correlation between mass transfer coefficient kLa and relevant operating parameters in cylindrical disposable shaken bioreactors on a bench-to-pilot scale.

    Science.gov (United States)

    Klöckner, Wolf; Gacem, Riad; Anderlei, Tibor; Raven, Nicole; Schillberg, Stefan; Lattermann, Clemens; Büchs, Jochen

    2013-12-02

    Among disposable bioreactor systems, cylindrical orbitally shaken bioreactors show important advantages. They provide a well-defined hydrodynamic flow combined with excellent mixing and oxygen transfer for mammalian and plant cell cultivations. Since there is no known universal correlation between the volumetric mass transfer coefficient for oxygen kLa and relevant operating parameters in such bioreactor systems, the aim of this current study is to experimentally determine a universal kLa correlation. A Respiration Activity Monitoring System (RAMOS) was used to measure kLa values in cylindrical disposable shaken bioreactors and Buckingham's π-Theorem was applied to define a dimensionless equation for kLa. In this way, a scale- and volume-independent kLa correlation was developed and validated in bioreactors with volumes from 2 L to 200 L. The final correlation was used to calculate cultivation parameters at different scales to allow a sufficient oxygen supply of tobacco BY-2 cell suspension cultures. The resulting equation can be universally applied to calculate the mass transfer coefficient for any of seven relevant cultivation parameters such as the reactor diameter, the shaking frequency, the filling volume, the viscosity, the oxygen diffusion coefficient, the gravitational acceleration or the shaking diameter within an accuracy range of +/- 30%. To our knowledge, this is the first kLa correlation that has been defined and validated for the cited bioreactor system on a bench-to-pilot scale.

  11. Influence of physical properties and operating parameters on hydrodynamics in Centrifugal Partition Chromatography.

    Science.gov (United States)

    Adelmann, S; Schembecker, G

    2011-08-12

    Besides the selection of a suitable biphasic solvent system the separation efficiency in Centrifugal Partition Chromatography (CPC) is mainly influenced by the hydrodynamics in the chambers. The flow pattern, the stationary phase retention and the interfacial area for mass transfer strongly depend on physical properties of the solvent system and operating parameters. In order to measure these parameters we visualized the hydrodynamics in a FCPC-chamber for five different solvent systems with an optical measurement system and calculated the stationary phase retention, interfacial area and the distribution of mobile phase thickness in the chamber. Although inclined chambers were used we found that the Coriolis force always deflected the mobile phase towards the chamber wall reducing the interfacial area. This effect increased for systems with low density difference. We also have shown that the stability of phase systems (stationary phase retention) and its tendency to disperse increased for smaller values of the ratio of interfacial tension and density difference. But also the viscosity ratio and the flow pattern itself had a significant effect on retention and dispersion of the mobile phase. As a result operating parameters should be chosen carefully with respect to physical properties for a CPC system. In order to reduce the effect of the Coriolis force CPC devices with greater rotor radius are desirable. Copyright © 2011 Elsevier B.V. All rights reserved.

  12. Service-learning in higher education relevant to the promotion of physical activity, healthful eating, and prevention of obesity

    Directory of Open Access Journals (Sweden)

    Richard R Rosenkranz

    2012-01-01

    Full Text Available Service-learning is a type of experiential teaching and learning strategy combining classroom instruction and meaningful community service and guided activities for reflection. This educational approach has been used frequently in higher education settings, including an array of disciplines such as medicine, theology, public health, physical education, nutrition, psychology, anthropology, and sociology. The purpose of the present review paper was to provide guidance on the use of service-learning within higher education, relevant to the preventive medicine and public health topics of healthful eating, physical activity, and obesity prevention. In service-learning, coursework is structured to address community needs, and to benefit students through the real-world application of knowledge. The benefits for students include positive impacts on social skills, empathy, awareness, understanding, and concern regarding community issues, plus greater confidence and skills to work with diverse populations, increased awareness of community resources, improved motivation, and enhanced knowledge. Educational institutions may also benefit through improved "town and gown" relations, as strong ties, partnerships, and mutually beneficial activities take place. The present literature review describes several service-learning applications such as nutrition education for kids, dietary improvement for seniors, foodservice recipe modification on a college campus, an intergenerational physical activity program for nursing home residents, motor skill development in kindergarteners, organized elementary school recess physical activities, health education, and obesity prevention in children. From this review, service-learning appears to have great potential as a flexible component of academic coursework in the areas of preventive medicine and public health.

  13. A critical experimental study of integral physics parameters in simulated LMFBR meltdown cores

    International Nuclear Information System (INIS)

    Bhattacharyya, S.K.; Wade, D.C.; Bucher, R.G.; Smith, D.M.; McKnight, R.D.; Lesage, L.G.

    1978-01-01

    Integral physics parameters of several representative, idealized meltdown LMFBR configurations were measured in mockup critical assemblies on the ZPR-9 reactor at Argonne National Laboratory. The experiments were designed to provide data for the validation of analytical methods used in the neutronics part of LMFBR accident analysis. Large core distortions were introduced in these experiments (involving 18.5% core volume) and the reactivity worths of configuration changes were determined. The neutronics parameters measured in the various configurations showed large changes upon core distortion. Both diffusion theory and transport theory methods were shown to mispredict the experimental configuration eigenvalues. In addition, diffusion theory methods were shown to result in a non-conservative misprediction of the experimental configuration change worths. (author)

  14. Dosimetry-adjusted reactor physics parameters for pressure vessel neutron exposure assessment

    International Nuclear Information System (INIS)

    McElroy, W.N.; Kellogg, L.S.

    1988-01-01

    The ASTM E706 master matrix standard describes a series of 20 American Society for Testing and Materials (ASTM) standard practices, guides, and methods for use in the prediction of neutron-induced changes in light water reactor (LWR) pressure vessel (PV) and support structure steels throughout a PV's service life. Some of these are existing ASTM standards, some are ASTM standards that have been modified, and some are new ASTM standards. These standards are periodically revised to assume their applicability during the 40-yr (32 effective full-power years) design license period for a nuclear power plant. They are now under review by two new ASTM plant life extension task groups: E10.05.11 on physics dosimetry and E10.02.11 on metallurgy. A brief review on the current application of these standards and a discussion of the status of work to verify the accuracy of derived physics-dosimetry parameter values is presented in this paper

  15. Estimating Parameters in Physical Models through Bayesian Inversion: A Complete Example

    KAUST Repository

    Allmaras, Moritz

    2013-02-07

    All mathematical models of real-world phenomena contain parameters that need to be estimated from measurements, either for realistic predictions or simply to understand the characteristics of the model. Bayesian statistics provides a framework for parameter estimation in which uncertainties about models and measurements are translated into uncertainties in estimates of parameters. This paper provides a simple, step-by-step example-starting from a physical experiment and going through all of the mathematics-to explain the use of Bayesian techniques for estimating the coefficients of gravity and air friction in the equations describing a falling body. In the experiment we dropped an object from a known height and recorded the free fall using a video camera. The video recording was analyzed frame by frame to obtain the distance the body had fallen as a function of time, including measures of uncertainty in our data that we describe as probability densities. We explain the decisions behind the various choices of probability distributions and relate them to observed phenomena. Our measured data are then combined with a mathematical model of a falling body to obtain probability densities on the space of parameters we seek to estimate. We interpret these results and discuss sources of errors in our estimation procedure. © 2013 Society for Industrial and Applied Mathematics.

  16. Relating auditory attributes of multichannel sound to preference and to physical parameters

    DEFF Research Database (Denmark)

    Choisel, Sylvain; Wickelmaier, Florian Maria

    2006-01-01

    playing a role in sound quality evaluation. Eight selected attributes are quantified by a panel of 39 listeners using paired-comparison judgments and probabilistic choice models, and related to overall preference. A multiple-regression model predicts preference well, and some similarities are observed......Sound reproduced by multichannel systems is affected by many factors giving rise to various sensations, or auditory attributes. Relating specific attributes to overall preference and to physical measures of the sound field provides valuable information for a better understanding of the parameters...

  17. Methane spectral line widths and shifts, and dependences on physical parameters

    Science.gov (United States)

    Fox, K.; Quillen, D. T.; Jennings, D. E.; Wagner, J.; Plymate, C.

    1991-01-01

    A detailed report of the recent high-resolution spectroscopic research on widths and shifts measured for a strong infrared-active fundamental of methane is presented. They were measured in collision with several rare gases and diatomic molecules, in the vibrational-rotational fundamental near 3000/cm. These measurements were made at an ambient temperature of 294 K over a range of pressures from 100 to 700 torr. The measurements are discussed in a preliminary but detailed and quantitative manner with reference to masses, polarizabilities, and quadrupole moments. Some functional dependences on these physical parameters are considered. The present data are useful for studies of corresponding planetary spectra.

  18. A method to measure the thermal-physical parameter of gas hydrate in porous media

    Energy Technology Data Exchange (ETDEWEB)

    Diao, S.B.; Ye, Y.G.; Yue, Y.J.; Zhang, J.; Chen, Q.; Hu, G.W. [Qingdao Inst. of Marine Geology, Qingdao (China)

    2008-07-01

    It is important to explore and make good use of gas hydrates through the examination of the thermal-physical parameters of sediment. This paper presented a new type of simulation experiment using a device that was designed based on the theories of time domain reflection and transient hot wire method. A series of investigations were performed using this new device. The paper described the experiment, with reference to the experiment device and materials and method. It also presented the results of thermal physical properties; result of the thermal conductivity of water, dry sand and wet sand; and results of wet sand under various pressures. The time domain reflection (TDR) method was utilized to monitor the saturation of the hydrates. Both parallel hot-wire method and cross hot-wire method were utilized to measure the thermal conductivity of the gas hydrate in porous media. A TDR sensor which was equipped with both cross hot-wire probe and parallel hot-wire probe was developed in order to measure the cell temperature with these two methods at one time. It was concluded that the TDR probe could be taken as an online measurement skill in investigating the hydrate thermal physical property in porous media. The TDR sensor could monitor the hydrate formation process and the parallel hot-wire method and cross hot-wire method could effectively measure the thermal physical properties of the hydrates in porous media. 10 refs., 7 figs.

  19. The effects of physical training on cardiovascular parameters, lipid disorders and endothelial function

    Directory of Open Access Journals (Sweden)

    Ranković Goran

    2012-01-01

    Full Text Available Bacground/Aim. Regular physical activity is widely accepted as factor that reduces all-cause mortality and improves a number of health outcomes. The aim of this study was to investigate the effects of aerobic exercise training on cardiovascular parameters, lipid profile and endothelial function in patients with stable coronary artery disease (CAD. Methods. The study included seventy patients with stable CAD. All the patients were divided into two groups: the group I - 33 patients with CAD and with regular aerobic physical training during cardiovascular rehabilitation program phase II for 3 weeks in our rehabilitation center and 3 weeks after that in their home setting, and the group II (control - 37 patients with CAD and sedentary lifestyle. Exercise training consisted of continual aerobic exercise for 45 minutes on a treadmill, room bicycle or walking, three times a week. We determined lipid and cardiovascular parameters and nitric oxide (NO concentration at the beginning and after a six-week of training. Results. There were no significant differences in body weight, waist circumference and waist/hip ratio at the start and at the end of physical training program. Physical training significantly reduced body mass index after six weeks compared to the initial and control values. Physical training significantly reduced systolic and diastolic blood pressure and heart rate after a six-week training period (p < 0.05. Heart rate was significantly lower after a training period as compared to the control (p < 0.05. A significant reduction of triglyceride and increased high density lipoprotein cholesterol (HDL-C concentration after cardiovascular rehabilitation were registered (p < 0.05. The concentration of triglycerides was significantly lower while NO and HDL-C were higher after six weeks in the exercise training group (p < 0.05. Conclusion. Dynamic training can improve blood pressure in patients with moderate to severe hypertension and reduce the

  20. Physics of ultrasonic wave propagation in bone and heart characterized using Bayesian parameter estimation

    Science.gov (United States)

    Anderson, Christian Carl

    This Dissertation explores the physics underlying the propagation of ultrasonic waves in bone and in heart tissue through the use of Bayesian probability theory. Quantitative ultrasound is a noninvasive modality used for clinical detection, characterization, and evaluation of bone quality and cardiovascular disease. Approaches that extend the state of knowledge of the physics underpinning the interaction of ultrasound with inherently inhomogeneous and isotropic tissue have the potential to enhance its clinical utility. Simulations of fast and slow compressional wave propagation in cancellous bone were carried out to demonstrate the plausibility of a proposed explanation for the widely reported anomalous negative dispersion in cancellous bone. The results showed that negative dispersion could arise from analysis that proceeded under the assumption that the data consist of only a single ultrasonic wave, when in fact two overlapping and interfering waves are present. The confounding effect of overlapping fast and slow waves was addressed by applying Bayesian parameter estimation to simulated data, to experimental data acquired on bone-mimicking phantoms, and to data acquired in vitro on cancellous bone. The Bayesian approach successfully estimated the properties of the individual fast and slow waves even when they strongly overlapped in the acquired data. The Bayesian parameter estimation technique was further applied to an investigation of the anisotropy of ultrasonic properties in cancellous bone. The degree to which fast and slow waves overlap is partially determined by the angle of insonation of ultrasound relative to the predominant direction of trabecular orientation. In the past, studies of anisotropy have been limited by interference between fast and slow waves over a portion of the range of insonation angles. Bayesian analysis estimated attenuation, velocity, and amplitude parameters over the entire range of insonation angles, allowing a more complete

  1. Estimation of anisotropy parameters in organic-rich shale: Rock physics forward modeling approach

    Energy Technology Data Exchange (ETDEWEB)

    Herawati, Ida, E-mail: ida.herawati@students.itb.ac.id; Winardhi, Sonny; Priyono, Awali [Mining and Petroleum Engineering Faculty, Institut Teknologi Bandung, Bandung, 40132 (Indonesia)

    2015-09-30

    Anisotropy analysis becomes an important step in processing and interpretation of seismic data. One of the most important things in anisotropy analysis is anisotropy parameter estimation which can be estimated using well data, core data or seismic data. In seismic data, anisotropy parameter calculation is generally based on velocity moveout analysis. However, the accuracy depends on data quality, available offset, and velocity moveout picking. Anisotropy estimation using seismic data is needed to obtain wide coverage of particular layer anisotropy. In anisotropic reservoir, analysis of anisotropy parameters also helps us to better understand the reservoir characteristics. Anisotropy parameters, especially ε, are related to rock property and lithology determination. Current research aims to estimate anisotropy parameter from seismic data and integrate well data with case study in potential shale gas reservoir. Due to complexity in organic-rich shale reservoir, extensive study from different disciplines is needed to understand the reservoir. Shale itself has intrinsic anisotropy caused by lamination of their formed minerals. In order to link rock physic with seismic response, it is necessary to build forward modeling in organic-rich shale. This paper focuses on studying relationship between reservoir properties such as clay content, porosity and total organic content with anisotropy. Organic content which defines prospectivity of shale gas can be considered as solid background or solid inclusion or both. From the forward modeling result, it is shown that organic matter presence increases anisotropy in shale. The relationships between total organic content and other seismic properties such as acoustic impedance and Vp/Vs are also presented.

  2. Estimation of anisotropy parameters in organic-rich shale: Rock physics forward modeling approach

    International Nuclear Information System (INIS)

    Herawati, Ida; Winardhi, Sonny; Priyono, Awali

    2015-01-01

    Anisotropy analysis becomes an important step in processing and interpretation of seismic data. One of the most important things in anisotropy analysis is anisotropy parameter estimation which can be estimated using well data, core data or seismic data. In seismic data, anisotropy parameter calculation is generally based on velocity moveout analysis. However, the accuracy depends on data quality, available offset, and velocity moveout picking. Anisotropy estimation using seismic data is needed to obtain wide coverage of particular layer anisotropy. In anisotropic reservoir, analysis of anisotropy parameters also helps us to better understand the reservoir characteristics. Anisotropy parameters, especially ε, are related to rock property and lithology determination. Current research aims to estimate anisotropy parameter from seismic data and integrate well data with case study in potential shale gas reservoir. Due to complexity in organic-rich shale reservoir, extensive study from different disciplines is needed to understand the reservoir. Shale itself has intrinsic anisotropy caused by lamination of their formed minerals. In order to link rock physic with seismic response, it is necessary to build forward modeling in organic-rich shale. This paper focuses on studying relationship between reservoir properties such as clay content, porosity and total organic content with anisotropy. Organic content which defines prospectivity of shale gas can be considered as solid background or solid inclusion or both. From the forward modeling result, it is shown that organic matter presence increases anisotropy in shale. The relationships between total organic content and other seismic properties such as acoustic impedance and Vp/Vs are also presented

  3. Physical Training, Hemodynamic Parameters and Arterial Stiffness: Friends or Foes of the Hypertensive Patient?

    Science.gov (United States)

    Iurciuc, Stela; Avram, Claudiu; Turi, Vladiana; Militaru, Anda; Avram, Adina; Cimpean, Anca Maria; Iurciuc, Mircea

    2016-01-01

    To evaluate the impact of physical training on central hemodynamic parameters and elasticity of large arteries in hypertensive patients. A total of 129 hypertensive patients were divided into two groups: group A followed lifestyle changes and physical training; and group B acted as a control group; seven parameters were recorded: Pulse wave velocity (PWVao), systolic blood pressure (SBP), diastolic blood pressure (DBP), pulse pressure (PP), central aortic systolic blood pressure (SBPao), aortic diastolic blood pressure (DBPao), and central aortic pulse pressure (PPao). The difference between values at 4 months and baseline (Δ) were as follows: ΔPWVao was -1.02 m/s (p<0.001) versus 0.17 m/s (p=0.035), ΔSBPao was -9.6 mmHg (p=0.009) versus 1.6 mmHg (p=0.064), and ΔPPao was -6.8 mmHg (p<0.001) versus 3.2 mmHg, (p=0.029) in group A versus B, respectively. Exercise training improves SBP, PP, SBPao, PPao and may delay arterial ageing. Copyright © 2016 International Institute of Anticancer Research (Dr. John G. Delinassios), All rights reserved.

  4. Physical, clinical, and psychosocial parameters of adolescents with different degrees of excess weight

    Directory of Open Access Journals (Sweden)

    Vanessa Drieli Seron Antonini

    2014-12-01

    Full Text Available OBJECTIVE: To compare body composition, hemodynamic parameters, health-related physical fitness, and health-related quality of life of adolescents with anthropometric diagnosis of overweight, obesity, and severe obesity.METHODS: 220 adolescents with excess body weight were enrolled. They were beginners in a intervention program that included patients based on age, availability, presence of excess body weight, place of residence, and agreement to participate in the study. This study collected anthropometric and hemodynamic variables, health-related physical fitness, and health-related quality of life of the adolescents. To compare the three groups according to nutritional status, parametric and non-parametric tests were applied. Significance level was set at p0.05. Body weight, body mass index, waist and hip circumference, and systolic blood pressure increased as degree of excess weightincreased (p<0.05. Dyastolic blood pressure of the severe obesity group was higher than the other groups (p<0.05. There was an association between the degree of excess weight and the prevalence of altered blood pressure (overweight: 12.1%; obesity: 28.1%; severe obesity: 45.5%; p<0.001. The results were similar when genders were analyzed separately.CONCLUSION: Results suggest that overweight adolescents presented similar results compared to obese and severely obese adolescents in most of the parameters analyzed.

  5. The role of remediation, natural alkalinity sources and physical stream parameters in stream recovery.

    Science.gov (United States)

    Kruse, Natalie A; DeRose, Lisa; Korenowsky, Rebekah; Bowman, Jennifer R; Lopez, Dina; Johnson, Kelly; Rankin, Edward

    2013-10-15

    Acid mine drainage (AMD) negatively impacts not only stream chemistry, but also aquatic biology. The ultimate goal of AMD treatment is restoration of the biological community, but that goal is rarely explicit in treatment system design. Hewett Fork in Raccoon Creek Watershed, Ohio, has been impacted by historic coal mining and has been treated with a calcium oxide doser in the headwaters of the watershed since 2004. All of the acidic inputs are isolated to a 1.5 km stretch of stream in the headwaters of the Hewett Fork watershed. The macroinvertebrate and fish communities have begun to recover and it is possible to distinguish three zones downstream of the doser: an impaired zone, a transition zone and a recovered zone. Alkalinity from both the doser and natural sources and physical stream parameters play a role in stream restoration. In Hewett Fork, natural alkaline additions downstream are higher than those from the doser. Both, alkaline additions and stream velocity drive sediment and metal deposition. Metal deposition occurs in several patterns; aluminum tends to deposit in regions of low stream velocity, while iron tends to deposit once sufficient alkalinity is added to the system downstream of mining inputs. The majority of metal deposition occurs upstream of the recovered zone. Both the physical stream parameters and natural alkalinity sources influence biological recovery in treated AMD streams and should be considered in remediation plans. Copyright © 2013 Elsevier Ltd. All rights reserved.

  6. A summary report on the search for current technologies and developers to develop depth profiling/physical parameter end effectors

    International Nuclear Information System (INIS)

    Nguyen, Q.H.

    1994-01-01

    This report documents the search strategies and results for available technologies and developers to develop tank waste depth profiling/physical parameter sensors. Sources searched include worldwide research reports, technical papers, journals, private industries, and work at Westinghouse Hanford Company (WHC) at Richland site. Tank waste physical parameters of interest are: abrasiveness, compressive strength, corrosiveness, density, pH, particle size/shape, porosity, radiation, settling velocity, shear strength, shear wave velocity, tensile strength, temperature, viscosity, and viscoelasticity. A list of related articles or sources for each physical parameters is provided

  7. A summary report on the search for current technologies and developers to develop depth profiling/physical parameter end effectors

    Energy Technology Data Exchange (ETDEWEB)

    Nguyen, Q.H.

    1994-09-12

    This report documents the search strategies and results for available technologies and developers to develop tank waste depth profiling/physical parameter sensors. Sources searched include worldwide research reports, technical papers, journals, private industries, and work at Westinghouse Hanford Company (WHC) at Richland site. Tank waste physical parameters of interest are: abrasiveness, compressive strength, corrosiveness, density, pH, particle size/shape, porosity, radiation, settling velocity, shear strength, shear wave velocity, tensile strength, temperature, viscosity, and viscoelasticity. A list of related articles or sources for each physical parameters is provided.

  8. Determination of Eros Physical Parameters for Near Earth Asteroid Rendezvous Orbit Phase Navigation

    Science.gov (United States)

    Miller, J. K.; Antreasian, P. J.; Georgini, J.; Owen, W. M.; Williams, B. G.; Yeomans, D. K.

    1995-01-01

    Navigation of the orbit phase of the Near Earth steroid Rendezvous (NEAR) mission will re,quire determination of certain physical parameters describing the size, shape, gravity field, attitude and inertial properties of Eros. Prior to launch, little was known about Eros except for its orbit which could be determined with high precision from ground based telescope observations. Radar bounce and light curve data provided a rough estimate of Eros shape and a fairly good estimate of the pole, prime meridian and spin rate. However, the determination of the NEAR spacecraft orbit requires a high precision model of Eros's physical parameters and the ground based data provides only marginal a priori information. Eros is the principal source of perturbations of the spacecraft's trajectory and the principal source of data for determining the orbit. The initial orbit determination strategy is therefore concerned with developing a precise model of Eros. The original plan for Eros orbital operations was to execute a series of rendezvous burns beginning on December 20,1998 and insert into a close Eros orbit in January 1999. As a result of an unplanned termination of the rendezvous burn on December 20, 1998, the NEAR spacecraft continued on its high velocity approach trajectory and passed within 3900 km of Eros on December 23, 1998. The planned rendezvous burn was delayed until January 3, 1999 which resulted in the spacecraft being placed on a trajectory that slowly returns to Eros with a subsequent delay of close Eros orbital operations until February 2001. The flyby of Eros provided a brief glimpse and allowed for a crude estimate of the pole, prime meridian and mass of Eros. More importantly for navigation, orbit determination software was executed in the landmark tracking mode to determine the spacecraft orbit and a preliminary shape and landmark data base has been obtained. The flyby also provided an opportunity to test orbit determination operational procedures that will be

  9. Compost mixture influence of interactive physical parameters on microbial kinetics and substrate fractionation.

    Science.gov (United States)

    Mohajer, Ardavan; Tremier, Anne; Barrington, Suzelle; Teglia, Cecile

    2010-01-01

    Composting is a feasible biological treatment for the recycling of wastewater sludge as a soil amendment. The process can be optimized by selecting an initial compost recipe with physical properties that enhance microbial activity. The present study measured the microbial O(2) uptake rate (OUR) in 16 sludge and wood residue mixtures to estimate the kinetics parameters of maximum growth rate mu(m) and rate of organic matter hydrolysis K(h), as well as the initial biodegradable organic matter fractions present. The starting mixtures consisted of a wide range of moisture content (MC), waste to bulking agent (BA) ratio (W/BA ratio) and BA particle size, which were placed in a laboratory respirometry apparatus to measure their OUR over 4 weeks. A microbial model based on the activated sludge process was used to calculate the kinetic parameters and was found to adequately reproduced OUR curves over time, except for the lag phase and peak OUR, which was not represented and generally over-estimated, respectively. The maximum growth rate mu(m), was found to have a quadratic relationship with MC and a negative association with BA particle size. As a result, increasing MC up to 50% and using a smaller BA particle size of 8-12 mm was seen to maximize mu(m). The rate of hydrolysis K(h) was found to have a linear association with both MC and BA particle size. The model also estimated the initial readily biodegradable organic matter fraction, MB(0), and the slower biodegradable matter requiring hydrolysis, MH(0). The sum of MB(0) and MH(0) was associated with MC, W/BA ratio and the interaction between these two parameters, suggesting that O(2) availability was a key factor in determining the value of these two fractions. The study reinforced the idea that optimization of the physical characteristics of a compost mixture requires a holistic approach. 2010 Elsevier Ltd. All rights reserved.

  10. Monte Carlo simulation of core physics parameters of the Nigeria Research Reactor-1 (NIRR-1)

    Energy Technology Data Exchange (ETDEWEB)

    Jonah, S.A. [Reactor Engineering Section, Centre for Energy Research and Training, Ahmadu Bello University, Zaria, P.M.B. 1014 (Nigeria)], E-mail: jonahsa2001@yahoo.com; Liaw, J.R.; Matos, J.E. [RERTR Program, Nuclear Engineering Division, Argonne National Laboratory, 9700 S. Cass Avenue, Argonne, IL 60439 (United States)

    2007-12-15

    The Monte Carlo N-Particle (MCNP) code, version 4C (MCNP4C) and a set of neutron cross-section data were used to develop an accurate three-dimensional computational model of the Nigeria Research Reactor-1 (NIRR-1). The geometry of the reactor core was modeled as closely as possible including the details of all the fuel elements, reactivity regulators, the control rod, all irradiation channels, and Be reflectors. The following reactor core physics parameters were calculated for the present highly enriched uranium (HEU) core: clean cold core excess reactivity ({rho}{sub ex}), control rod (CR) and shim worth, shut down margin (SDM), neutron flux distributions in the irradiation channels, reactivity feedback coefficients and the kinetics parameters. The HEU input model was validated by experimental data from the final safety analyses report (SAR). The model predicted various key neutronics parameters fairly accurately and the calculated thermal neutron fluxes in the irradiation channels agree with the values obtained by foil activation method. Results indicate that the established Monte Carlo model is an accurate representation of the NIRR-1 HEU core and will be used to perform feasibility for conversion to low enriched uranium (LEU)

  11. Determination of new electroweak parameters at the ILC. Sensitivity to new physics

    Energy Technology Data Exchange (ETDEWEB)

    Beyer, M.; Schmidt, E.; Schroeder, H. [Rostock Univ. (Germany). Inst. fuer Physik; Kilian, W. [Siegen Univ. (Gesamthochschule) (Germany). Fach Physik]|[Deutsches Elektronen-Synchrotron (DESY), Hamburg (Germany); Krstonosic, P.; Reuter, J. [Deutsches Elektronen-Synchrotron (DESY), Hamburg (Germany); Moenig, K. [Deutsches Elektronen-Synchrotron (DESY), Zeuthen (Germany)

    2006-04-15

    We present a study of the sensitivity of an International Linear Collider (ILC) to electroweak parameters in the absence of a light Higgs boson. In particular, we consider those parameters that have been inaccessible at previous colliders, quartic gauge couplings. Within a generic effective-field theory context we analyze all processes that contain quasi-elastic weak-boson scattering, using complete six-fermion matrix elements in unweighted event samples, fast simulation of the ILC detector, and a multidimensional parameter fit of the set of anomalous couplings. The analysis does not rely on simplifying assumptions such as custodial symmetry or approximations such as the equivalence theorem. We supplement this by a similar new study of triple weak-boson production, which is sensitive to the same set of anomalous couplings. Including the known results on triple gauge couplings and oblique corrections, we thus quantitatively determine the indirect sensitivity of the ILC to new physics in the electroweak symmetry-breaking sector, conveniently parameterized by real or fictitious resonances in each accessible spin/isospin channel. (Orig.)

  12. Measurements of Physical Parameters of White Dwarfs: A Test of the Mass–Radius Relation

    Energy Technology Data Exchange (ETDEWEB)

    Bédard, A.; Bergeron, P.; Fontaine, G., E-mail: bedard@astro.umontreal.ca, E-mail: bergeron@astro.umontreal.ca, E-mail: fontaine@astro.umontreal.ca [Département de Physique, Université de Montréal, C.P. 6128, Succ. Centre-Ville, Montréal, Québec H3C 3J7 (Canada)

    2017-10-10

    We present a detailed spectroscopic and photometric analysis of 219 DA and DB white dwarfs for which trigonometric parallax measurements are available. Our aim is to compare the physical parameters derived from the spectroscopic and photometric techniques, and then to test the theoretical mass–radius relation for white dwarfs using these results. The agreement between spectroscopic and photometric parameters is found to be excellent, especially for effective temperatures, showing that our model atmospheres and fitting procedures provide an accurate, internally consistent analysis. The values of surface gravity and solid angle obtained, respectively, from spectroscopy and photometry, are combined with parallax measurements in various ways to study the validity of the mass–radius relation from an empirical point of view. After a thorough examination of our results, we find that 73% and 92% of the white dwarfs are consistent within 1 σ and 2 σ confidence levels, respectively, with the predictions of the mass–radius relation, thus providing strong support to the theory of stellar degeneracy. Our analysis also allows us to identify 15 stars that are better interpreted in terms of unresolved double degenerate binaries. Atmospheric parameters for both components in these binary systems are obtained using a novel approach. We further identify a few white dwarfs that are possibly composed of an iron core rather than a carbon/oxygen core, since they are consistent with Fe-core evolutionary models.

  13. Evaluation of Physic-chemical Parameters of Water Quality on Agricultural Fields of Western Bahia

    Directory of Open Access Journals (Sweden)

    Enoc Lima do Rego

    2017-06-01

    Full Text Available For the diagnosis of the quality of water it is necessary to execute a set of analyzes (physical and chemical of the body of water that will provide information that integrate biotic and abiotic factors that govern the functioning of the ecosystem. The objective of this study is to evaluate the quality of water from wells and rivers of Urucuia aquifer region for investigation of contamination or contamination risks. Were realize collections in nine (9 areas of western Bahia, which were collect in each area, two points of well water samples and a river, and determining the electrical conductivity, pH, dissolved ions and metals. The results were compare with the maximum permissible values (MPV for human consumption by Ordinance No. 2914/11 of the Ministry of Health and National Environment Counsel - CONAMA (Resolution 357 and supplementary resolutions. The quantitative results of the analysis showed that the surface and well waters that are part of the aquifer Urucuia within the parameters investigated are below the values recommended by the legislation showing that the agricultural activities in the region has not affected to the evaluated parameters, the quality of water for human consumption. However, it is necessary a monitoring of surface and groundwater in the region with expansion parameters evaluated. DOI: http://dx.doi.org/10.17807/orbital.v9i2.880

  14. Determination of new electroweak parameters at the ILC. Sensitivity to new physics

    International Nuclear Information System (INIS)

    Beyer, M.; Schmidt, E.; Schroeder, H.; Krstonosic, P.; Reuter, J.; Moenig, K.

    2006-04-01

    We present a study of the sensitivity of an International Linear Collider (ILC) to electroweak parameters in the absence of a light Higgs boson. In particular, we consider those parameters that have been inaccessible at previous colliders, quartic gauge couplings. Within a generic effective-field theory context we analyze all processes that contain quasi-elastic weak-boson scattering, using complete six-fermion matrix elements in unweighted event samples, fast simulation of the ILC detector, and a multidimensional parameter fit of the set of anomalous couplings. The analysis does not rely on simplifying assumptions such as custodial symmetry or approximations such as the equivalence theorem. We supplement this by a similar new study of triple weak-boson production, which is sensitive to the same set of anomalous couplings. Including the known results on triple gauge couplings and oblique corrections, we thus quantitatively determine the indirect sensitivity of the ILC to new physics in the electroweak symmetry-breaking sector, conveniently parameterized by real or fictitious resonances in each accessible spin/isospin channel. (Orig.)

  15. Aquatic environmental assessment of Lake Balaton in the light of physical-chemical water parameters.

    Science.gov (United States)

    Sebestyén, Vitkor; Németh, József; Juzsakova, Tatjana; Domokos, Endre; Kovács, Zsófia; Rédey, Ákos

    2017-11-01

    One of the issues of the Hungarian Water Management Strategy is the improvement and upgrading of the water of Lake Balaton. The Water Framework Directive (WFD) specifies and sets forth the achievement of the good ecological status. However, the assessment of the water quality of the lake as a complex system requires a comprehensive monitoring and evaluation procedure. Measurements were carried out around the Lake Balaton at ten different locations/sites and 13 physical-chemical parameters were monitored at each measurement site.For the interpretation of the water chemistry parameters the Aquatic Environmental Assessment (AEA) method devised by authors was used for the water body of the Lake Balaton. The AEA method can be used for all types of the water bodies since it is flexible and using individual weighting procedure for the water chemistry parameters comprehensive information can be obtain. The AEA method was compared with existing EIA methods according to a predefined criterion system and proved to be the most suitable tool for evaluating the environmental impacts in our study.On the basis of the results it can be concluded that the status of the quality of studied area on the Lake Balaton can be categorized as proper quality (from the outcome of the ten measurement sites this conclusion was reached at seven sites).

  16. Effect of long-term physical aging on the kinetic parameters in a common pharmaceutical drug: Flutab

    International Nuclear Information System (INIS)

    Abu-Sehly, A.A.; Elabbar, A.A.

    2011-01-01

    Differential scanning calorimetry (DSC) measurements were performed to investigate the effects of long-term physical aging on kinetic parameters of the pharmaceutical drug (Flutab). Kinetics parameters such as activation energy (E) and fragility parameter (m) of the glass transition for aged and rejuvenated glasses were determined using different kinetic models. Evidence of variation of E with temperature is presented. It is shown in this work that natural storage of the drug introduced significant physical aging as indicated by changes in the glass transition temperature, activation energy and fragility parameter.

  17. CPU time optimization and precise adjustment of the Geant4 physics parameters for a VARIAN 2100 C/D gamma radiotherapy linear accelerator simulation using GAMOS

    Science.gov (United States)

    Arce, Pedro; Lagares, Juan Ignacio

    2018-02-01

    We have verified the GAMOS/Geant4 simulation model of a 6 MV VARIAN Clinac 2100 C/D linear accelerator by the procedure of adjusting the initial beam parameters to fit the percentage depth dose and cross-profile dose experimental data at different depths in a water phantom. Thanks to the use of a wide range of field sizes, from 2  ×  2 cm2 to 40  ×  40 cm2, a small phantom voxel size and high statistics, fine precision in the determination of the beam parameters has been achieved. This precision has allowed us to make a thorough study of the different physics models and parameters that Geant4 offers. The three Geant4 electromagnetic physics sets of models, i.e. Standard, Livermore and Penelope, have been compared to the experiment, testing the four different models of angular bremsstrahlung distributions as well as the three available multiple-scattering models, and optimizing the most relevant Geant4 electromagnetic physics parameters. Before the fitting, a comprehensive CPU time optimization has been done, using several of the Geant4 efficiency improvement techniques plus a few more developed in GAMOS.

  18. Physical, Spatial, and Molecular Aspects of Extracellular Matrix of In Vivo Niches and Artificial Scaffolds Relevant to Stem Cells Research

    Directory of Open Access Journals (Sweden)

    Maria Akhmanova

    2015-01-01

    Full Text Available Extracellular matrix can influence stem cell choices, such as self-renewal, quiescence, migration, proliferation, phenotype maintenance, differentiation, or apoptosis. Three aspects of extracellular matrix were extensively studied during the last decade: physical properties, spatial presentation of adhesive epitopes, and molecular complexity. Over 15 different parameters have been shown to influence stem cell choices. Physical aspects include stiffness (or elasticity, viscoelasticity, pore size, porosity, amplitude and frequency of static and dynamic deformations applied to the matrix. Spatial aspects include scaffold dimensionality (2D or 3D and thickness; cell polarity; area, shape, and microscale topography of cell adhesion surface; epitope concentration, epitope clustering characteristics (number of epitopes per cluster, spacing between epitopes within cluster, spacing between separate clusters, cluster patterns, and level of disorder in epitope arrangement, and nanotopography. Biochemical characteristics of natural extracellular matrix molecules regard diversity and structural complexity of matrix molecules, affinity and specificity of epitope interaction with cell receptors, role of non-affinity domains, complexity of supramolecular organization, and co-signaling by growth factors or matrix epitopes. Synergy between several matrix aspects enables stem cells to retain their function in vivo and may be a key to generation of long-term, robust, and effective in vitro stem cell culture systems.

  19. Rock Physics and Petrographic Parameters Relationship Within Siliciclastic Rocks: Quartz Sandstone Outcrop Study Case

    Science.gov (United States)

    Syafriyono, S.; Caesario, D.; Swastika, A.; Adlan, Q.; Syafri, I.; Abdurrokhim, A.; Mardiana, U.; Mohamad, F.; Alfadli, M. K.; Sari, V. M.

    2018-03-01

    Rock physical parameters value (Vp and Vs) is one of fundamental aspects in reservoir characterization as a tool to detect rock heterogenity. Its response is depend on several reservoir conditions such as lithology, pressure and reservoir fluids. The value of Vp and Vs is controlled by grain contact and contact stiffness, a function of clay mineral content and porosity also affected by mineral composition. The study about Vp and Vs response within sandstone and its relationship with petrographic parameters has become important to define anisotrophy of reservoir characteristics distribution and could give a better understanding about local diagenesis that influence clastic reservoir properties. Petrographic analysis and Vp-Vs calculation was carried out to 12 core sample which is obtained by hand-drilling of the outcrop in Sukabumi area, West Java as a part of Bayah Formation. Data processing and interpretation of sedimentary vertical succession showing that this outcrop comprises of 3 major sandstone layers indicating fluvial depositional environment. As stated before, there are 4 petrographic parameters (sorting, roundness, clay mineral content, and grain contact) which are responsible to the differences of shear wave and compressional wave value in this outcrop. Lithology with poor-sorted and well- roundness has Vp value lower than well-sorted and poor-roundness (sub-angular) grain. For the sample with high clay content, Vp value is ranging from 1681 to 2000 m/s and could be getting high until 2190 to 2714 m/s in low clay content sample even though the presence of clay minerals cannot be defined neither as matrix nor cement. The whole sample have suture grain contact indicating telogenesis regime whereas facies has no relationship with Vp and Vs value because of the different type of facies show similar petrographic parameters after diagenesis.

  20. Evolution of chemical-physical parameters and rheological characteristics of Sarda and Maltese goat dry hams

    Directory of Open Access Journals (Sweden)

    Rina Mazzette

    2012-10-01

    Full Text Available In Sardinia, goat farming is a very important resource. Sarda and Maltese breed are reared mainly for milk production and for suckling kids meat, while meat from adult goats is undervalued. The use of adult goat meat to obtain ripened ham will contribute to safeguard the Sardinian goat supply chain. The aim of the present study was to characterize Sarda and Maltese goat dry ham in order to evaluate the quality of autochthonous goat breed meat. Chemical-physical characteristics were determined dur-ing the production stages, while the rheological and colour parameters and the composition of the goat ham were determined at the end of ripening. The pH evolution during processing were similar to other cured meat products, e.g. sheep hams, even though the values were high, especially in the products from Sarda breed. The aw value regularly decreased during processing. Colour parameters (L*, a*, b* in the hams from Maltese goat breed were significantly (P<0.05 higher than in those from Sarda. The Sarda goat ham showed a significantly lower percentage of moisture (42% vs 52%, an higher protein content (44.35% vs 34.19%, while no differences were pointed out in the total fat content. Among the ham rheological properties, hardness parameters showed higher levels (13850.22±7589.92 vs 11073.99±6481.31, respectively in Sarda and Maltese hams in comparison to similar products from pork and sheep, while adhesiveness value was lower. The results show that the quality parameters of goat ripened hams are affected mainly by the charac-teristics of the goat meat, in relation on the breed and the breeding system, and, less, by the traditional technology.

  1. Assessment of functioning in the acute hospital: operationalisation and reliability testing of ICF categories relevant for physical therapists interventions.

    Science.gov (United States)

    Grill, Eva; Gloor-Juzi, Thomas; Huber, Erika O; Stucki, Gerold

    2011-01-01

    To operationalize items based on categories of the International Classification of Functioning, Disability and Health (ICF) relevant to patient problems that are addressed by physiotherapeutic interventions in the acute hospital, and to test the reliability of these items when applied by physiotherapists. A selection of 124 ICF categories was operation-alized in a formal decision-making and consensus process. The reliability of the newly operationalized item list was tested with a cross-sectional study with repeated measurements. The item writing process resulted in 94 dichotomous and 30 polytomous items. Data were collected in a convenience sample of 28 patients with neurological, musculoske-letal, cardiopulmonary, or internal organ conditions, requiring physical therapy in an acute hospital. Fifty-six percent of the polytomous and 68% of the dichotomous items had a raw agreement of 0.7 or above, whereas 36% of all polytomous and 34% of all dichotomous items had a kappa coefficient of 0.7 and above. The study supports that the ICF is adaptable to professional and setting-specific needs of physiotherapists. Further research towards the development of reliable instruments for physiotherapists based on the ICF seems justified. :

  2. Study of gain variation as a function of physical parameters of GEM foil

    CERN Document Server

    Das, Supriya

    2015-01-01

    The ALICE experiment at LHC has planned to upgrade the TPC by replacing the MWPC with GEM based detecting elements to restrict the IBF to a tolerable value. However the variation of the gain as a function of physical parameters of industrially produced large size GEM foils is needed to be studied as a part of the QA procedure for the detector. The size of the electron avalanche and consequently the gain for GEM based detectors depend on the electric field distribution inside the holes. Geometry of a hole plays an important role in defining the electric field inside it. In this work we have studied the variation of the gain as a function of the hole diameters using Garfield++ simulation package.

  3. Physical parameters of groundwater as indicators of pollution in industrial areas of Taxila, Wah and Hasanabdal

    International Nuclear Information System (INIS)

    Khan, M.S.; Zaheer-ud-Dln-Qureshi

    2004-01-01

    The Wah area historically famous for having sweet aquifer system is greatly effected due to environmental activities, such as industrialization and poor sewage system in the recent past. Thirty water samples have been collected from dug wells penetrating to shallow two layers in a multi layered aquifer system. The shallow aquifer is located at a depth of 45-85 feet and composed of very fine grained sand to silt in two layers separated by silty clay. To assess the contamination problems, physical parameters of groundwater such as temperature, color, turbidity, odour and taste have been estimated fifty percent of the dug wells have been found as contaminated and not fit for human consumption according 10 WHO standards. High values of electrical conductance determined in fifty percent of wells show trends of chemical contamination and their probable sources near by these wells against the general recharge pattern prevailing in the area can be located. (author)

  4. Effective parameters, effective processes: From porous flow physics to in situ remediation technology

    International Nuclear Information System (INIS)

    Pruess, K.

    1995-06-01

    This paper examines the conceptualization of multiphase flow processes on the macroscale, as needed in field applications. It emphasizes that upscaling from the pore-level will in general not only introduce effective parameters but will also give rise to ''effective processes,'' i.e., the emergence of new physical effects that may not have a microscopic counterpart. ''Phase dispersion'' is discussed as an example of an effective process for the migration and remediation of non-aqueous phase liquid (NAPL) contaminants in heterogeneous media. An approximate space-and-time scaling invariance is derived for gravity-driven liquid flow in unsaturated two-dimensional porous media (fractures). Issues for future experimental and theoretical work are identified

  5. Monte Carlo simulation of core physics parameters of the Syrian MNSR reactor

    International Nuclear Information System (INIS)

    Khattab, K.; Sulieman, I.

    2011-01-01

    A 3-D neutronic model for the Syrian Miniature Neutron Source Reactor (MNSR) was developed earlier to conduct the reactor neutronic analysis using the MCNP-4C code. The continuous energy neutron cross sections were evaluated from the ENDF/B-VI library. This model is used in this paper to calculate the following reactor core physics parameters: the clean cold core excess reactivity, calibration of the control rod and calculation its shut down margin, calibration of the top beryllium shim plate reflector, the axial neutron flux distributions in the inner and outer irradiation positions and calculations of the prompt neutron life time (ι p ) and the effective delayed neutron fraction ( β e ff). Good agreements are noticed between the calculated and the measured results. These agreements indicate that the established model is an accurate representation of Syrian MNSR core and will be used for other calculations in the future. (author)

  6. Effect of nonlinear void reactivity on bifurcation characteristics of a lumped-parameter model of a BWR: A study relevant to RBMK

    Energy Technology Data Exchange (ETDEWEB)

    Verma, Dinkar, E-mail: dinkar@iitk.ac.in [Nuclear Engineering and Technology Program, Indian Institute of Technology Kanpur, Kanpur 208 016 (India); Kalra, Manjeet Singh, E-mail: drmanjeet.singh@dituniversity.edu.in [DIT University, Dehradun 248 009 (India); Wahi, Pankaj, E-mail: wahi@iitk.ac.in [Department of Mechanical Engineering, Indian Institute of Technology Kanpur, Kanpur 208 016 (India)

    2017-04-15

    Highlights: • A simplified model with nonlinear void reactivity feedback is studied. • Method of multiple scales for nonlinear analysis and oscillation characteristics. • Second order void reactivity dominates in determining system dynamics. • Opposing signs of linear and quadratic void reactivity enhances global safety. - Abstract: In the present work, the effect of nonlinear void reactivity on the dynamics of a simplified lumped-parameter model for a boiling water reactor (BWR) is investigated. A mathematical model of five differential equations comprising of neutronics and thermal-hydraulics encompassing the nonlinearities associated with both the reactivity feedbacks and the heat transfer process has been used. To this end, we have considered parameters relevant to RBMK for which the void reactivity is known to be nonlinear. A nonlinear analysis of the model exploiting the method of multiple time scales (MMTS) predicts the occurrence of the two types of Hopf bifurcation, namely subcritical and supercritical, leading to the evolution of limit cycles for a range of parameters. Numerical simulations have been performed to verify the analytical results obtained by MMTS. The study shows that the nonlinear reactivity has a significant influence on the system dynamics. A parametric study with varying nominal reactor power and operating conditions in coolant channel has also been performed which shows the effect of change in concerned parameter on the boundary between regions of sub- and super-critical Hopf bifurcations in the space constituted by the two coefficients of reactivities viz. the void and the Doppler coefficient of reactivities. In particular, we find that introduction of a negative quadratic term in the void reactivity feedback significantly increases the supercritical region and dominates in determining the system dynamics.

  7. Sensitivity analysis of minor actinides transmutation to physical and technological parameters

    International Nuclear Information System (INIS)

    Kooyman, T.; Buiron, L.

    2015-01-01

    Minor actinides transmutation is one of the 3 main axis defined by the 2006 French law for management of nuclear waste, along with long-term storage and use of a deep geological repository. Transmutation options for critical systems can be divided in two different approaches: (a) homogeneous transmutation, in which minor actinides are mixed with the fuel. This exhibits the drawback of 'polluting' the entire fuel cycle with minor actinides and also has an important impact on core reactivity coefficients such as Doppler Effect or sodium void worth for fast reactors when the minor actinides fraction increases above 3 to 5% depending on the core; (b) heterogeneous transmutation, in which minor actinides are inserted into transmutation targets which can be located in the center or in the periphery of the core. This presents the advantage of decoupling the management of the minor actinides from the conventional fuel and not impacting the core reactivity coefficients. In both cases, the design and analyses of potential transmutation systems have been carried out in the frame of Gen IV fast reactor using a 'perturbation' approach in which nominal power reactor parameters are modified to accommodate the loading of minor actinides. However, when designing such a transmutation strategy, parameters from all steps of the fuel cycle must be taken into account, such as spent fuel heat load, gamma or neutron sources or fabrication feasibility. Considering a multi-recycling strategy of minor actinides, an analysis of relevant estimators necessary to fully analyze a transmutation strategy has been performed in this work and a sensitivity analysis of these estimators to a broad choice of reactors and fuel cycle parameters has been carried out. No threshold or percolation effects were observed. Saturation of transmutation rate with regards to several parameters has been observed, namely the minor actinides volume fraction and the irradiation time. Estimators of interest that have been

  8. Physically-Retrieving Cloud and Thermodynamic Parameters from Ultraspectral IR Measurements

    Science.gov (United States)

    Zhou, Daniel K.; Smith, William L., Sr.; Liu, Xu; Larar, Allen M.; Mango, Stephen A.; Huang, Hung-Lung

    2007-01-01

    A physical inversion scheme has been developed, dealing with cloudy as well as cloud-free radiance observed with ultraspectral infrared sounders, to simultaneously retrieve surface, atmospheric thermodynamic, and cloud microphysical parameters. A fast radiative transfer model, which applies to the clouded atmosphere, is used for atmospheric profile and cloud parameter retrieval. A one-dimensional (1-d) variational multi-variable inversion solution is used to improve an iterative background state defined by an eigenvector-regression-retrieval. The solution is iterated in order to account for non-linearity in the 1-d variational solution. It is shown that relatively accurate temperature and moisture retrievals can be achieved below optically thin clouds. For optically thick clouds, accurate temperature and moisture profiles down to cloud top level are obtained. For both optically thin and thick cloud situations, the cloud top height can be retrieved with relatively high accuracy (i.e., error < 1 km). NPOESS Airborne Sounder Testbed Interferometer (NAST-I) retrievals from the Atlantic-THORPEX Regional Campaign are compared with coincident observations obtained from dropsondes and the nadir-pointing Cloud Physics Lidar (CPL). This work was motivated by the need to obtain solutions for atmospheric soundings from infrared radiances observed for every individual field of view, regardless of cloud cover, from future ultraspectral geostationary satellite sounding instruments, such as the Geosynchronous Imaging Fourier Transform Spectrometer (GIFTS) and the Hyperspectral Environmental Suite (HES). However, this retrieval approach can also be applied to the ultraspectral sounding instruments to fly on Polar satellites, such as the Infrared Atmospheric Sounding Interferometer (IASI) on the European MetOp satellite, the Cross-track Infrared Sounder (CrIS) on the NPOESS Preparatory Project and the following NPOESS series of satellites.

  9. DNA damage in lymphocytes induced by cardiac CT and comparison with physical exposure parameters

    Energy Technology Data Exchange (ETDEWEB)

    Fukumoto, Wataru; Tatsugami, Fuminari; Awai, Kazuo [Department of Diagnostic Radiology, Institute of Biomedical Health Sciences, Hiroshima University, Hiroshima (Japan); Ishida, Mari; Sakai, Chiemi [Institute of Biomedical and Health Sciences, Department of Cardiovascular Physiology and Medicine, Hiroshima University, Hiroshima (Japan); Tashiro, Satoshi [Hiroshima University, Department of Cellular Biology, Research Institute for Radiation Biology and Medicine, Hiroshima (Japan); Ishida, Takafumi [Institute of Clinical Research West Medical Center, Hiroshima (Japan); Nakano, Yukiko [Hiroshima University Hospital, Department of Cardiovascular Medicine, Hiroshima (Japan)

    2017-04-15

    To investigate whether physical exposure parameters such as the dose index (CTDI), dose length product (DLP), and size-specific dose estimate (SSDE) are predictive of DNA damage. In vitro, we scanned a phantom containing blood samples from five volunteers at CTDI 50, 100, and 150 mGy. One sample was not scanned. We also scanned samples in three different-size phantoms at CTDI 100 mGy. In vivo, we enrolled 45 patients and obtained blood samples before and after cardiac CT. The γ-H2AX foci were counted. In vitro, in the control and at CTDI 50, 100, and 150 mGy, the number of γ-H2AX was 0.94 ± 0.24 (standard error, SE), 1.28 ± 0.30, 1.91 ± 0.47, and 2.16 ± 0.20. At SSDE 180, 156, and 135 mGy, it was 2.41 ± 0.20, 1.91 ± 0.47, and 1.42 ± 0.20 foci/cell. The γ-H2AX foci were positively correlated with the radiation dose and negatively correlated with the body size. In vivo, the γ-H2AX foci were significantly increased after CT (from 1.21 ± 0.19 to 1.92 ± 0.22 foci/cell) and correlated with CTDI, DLP, and SSDE. DNA damage was induced by cardiac CT. There was a correlation between the physical exposure parameters and γ-H2AX. (orig.)

  10. Classification of high-resolution multi-swath hyperspectral data using Landsat 8 surface reflectance data as a calibration target and a novel histogram based unsupervised classification technique to determine natural classes from biophysically relevant fit parameters

    Science.gov (United States)

    McCann, C.; Repasky, K. S.; Morin, M.; Lawrence, R. L.; Powell, S. L.

    2016-12-01

    Compact, cost-effective, flight-based hyperspectral imaging systems can provide scientifically relevant data over large areas for a variety of applications such as ecosystem studies, precision agriculture, and land management. To fully realize this capability, unsupervised classification techniques based on radiometrically-calibrated data that cluster based on biophysical similarity rather than simply spectral similarity are needed. An automated technique to produce high-resolution, large-area, radiometrically-calibrated hyperspectral data sets based on the Landsat surface reflectance data product as a calibration target was developed and applied to three subsequent years of data covering approximately 1850 hectares. The radiometrically-calibrated data allows inter-comparison of the temporal series. Advantages of the radiometric calibration technique include the need for minimal site access, no ancillary instrumentation, and automated processing. Fitting the reflectance spectra of each pixel using a set of biophysically relevant basis functions reduces the data from 80 spectral bands to 9 parameters providing noise reduction and data compression. Examination of histograms of these parameters allows for determination of natural splitting into biophysical similar clusters. This method creates clusters that are similar in terms of biophysical parameters, not simply spectral proximity. Furthermore, this method can be applied to other data sets, such as urban scenes, by developing other physically meaningful basis functions. The ability to use hyperspectral imaging for a variety of important applications requires the development of data processing techniques that can be automated. The radiometric-calibration combined with the histogram based unsupervised classification technique presented here provide one potential avenue for managing big-data associated with hyperspectral imaging.

  11. A study on physics parameters and flux behaviour for a fast critical facility using ''Baker'' model

    International Nuclear Information System (INIS)

    Abu-Leilah, M.M.; Hussein, A.Z.; Gaafar, M.A.; Hamouda, I.F.

    1983-01-01

    Comparative study was performed to emphasize the effects of using different nuclear data systems and methods on the various parameters of the fast reactor. Multigroup libraries as 11 (ANL-5800) and 26 (BNAB-64) energy group systems of nuclear data constants were used in the present work. The calculations were carried out for both infinite dilution (self-shielding factor F= 1) and self-shielded cross sections. Various computer codes were elaborated and derived to meet the conditional requirements for such calculations. The important output of these calculations are the neutron spectra, neutron balance, fission and capture rate distributions, critical mass, breeding ratio in each region and total breeding ratio of the reactor. Five different cases of study were considered employing two systems of constants, infinite dilution and self-shielded cross-sections and treating stainless steel of the reactor as to be substituted by iron. Moreover, calculations have been concerned for averaged one group nuclear data constants which were condensed from the 11 and 26 group systems. Comparisons of the multigroup results with those of the group were made. The condensation process for averaging to one group was done to estimate the effect of such physical simplification on the calculated parameters. The present work results have been compared with many published works. Fair agreements are obtained, which varified the consistance and completeness of the methods implemented and used

  12. Estimation of static parameters based on dynamical and physical properties in limestone rocks

    Science.gov (United States)

    Ghafoori, Mohammad; Rastegarnia, Ahmad; Lashkaripour, Gholam Reza

    2018-01-01

    Due to the importance of uniaxial compressive strength (UCS), static Young's modulus (ES) and shear wave velocity, it is always worth to predict these parameters from empirical relations that suggested for other formations with same lithology. This paper studies the physical, mechanical and dynamical properties of limestone rocks using the results of laboratory tests which carried out on 60 the Jahrum and the Asmari formations core specimens. The core specimens were obtained from the Bazoft dam site, hydroelectric supply and double-curvature arch dam in Iran. The Dynamic Young's modulus (Ed) and dynamic Poisson ratio were calculated using the existing relations. Some empirical relations were presented to estimate uniaxial compressive strength, as well as static Young's modulus and shear wave velocity (Vs). Results showed the static parameters such as uniaxial compressive strength and static Young's modulus represented low correlation with water absorption. It is also found that the uniaxial compressive strength and static Young's modulus had high correlation with compressional wave velocity and dynamic Young's modulus, respectively. Dynamic Young's modulus was 5 times larger than static Young's modulus. Further, the dynamic Poisson ratio was 1.3 times larger than static Poisson ratio. The relationship between shear wave velocity (Vs) and compressional wave velocity (Vp) was power and positive with high correlation coefficient. Prediction of uniaxial compressive strength based on Vp was better than that based on Vs . Generally, both UCS and static Young's modulus (ES) had good correlation with Ed.

  13. Study and optimization of thermo-physical parameters for a solar-still performance

    International Nuclear Information System (INIS)

    Kaabi, A.; Zaidi, H.

    2006-01-01

    The thermo-physical parameters of a static solar still with a greenhouse effect were studied. The simulation was conducted for each component of the still at the same initial temperature and time step. Analyzed parameters included the solar collector; brine; absorber; and insulator. The thermophysical changes of different still components were analyzed as well as their impacts on the solar still's output. The aim of the study was to enhance distilled water production. A Gauss-Seidel iterative method was used to solve thermophysical equations. Results of the study showed that maximum hourly production of distilled water was reached at 13:00 PM, when temperatures differences between the brine and the inner side of the still had a significant impact on system productivity. Three types of material were tested: copper, aluminum, and steel. Copper gave improved production, higher thermal conductivity; higher heat, and an improved coefficient of absorption. Production of distilled water increased when a black layer of nickel was added to the still. It was concluded that solar still efficiency increased when the absorber had a high thermal conductivity and a high specific heat. 14 refs., 6 figs

  14. The physical interpretation of the parameters measured during the tensile testing of materials at elevated temperatures

    International Nuclear Information System (INIS)

    Burton, B.

    1984-01-01

    Hot tensile (or compression) testing, where the stress developed in a material is measured under an imposed strain rate, is often used as an alternative to conventional creep testing. The advantages of the hot tensile test are that its duration can be more closely controlled by the experimenter and also that the technique is more convenient, since high precision testing machines are available. The main disadvantage is that the interpretation of results is more complex. The present paper relates the parameters which are measured in hot tensile tests, to physical processes which occur in materials deforming by a variety of mechanisms. For cases where no significant structural changes occur, as in viscous or superplastic flow, analytical expressions are derived which relate the stresses measured in these tests to material constants. When deformation is controlled by recovery processes, account has to be taken of the structural changes which occur concurrently. A wide variety of behaviour may then be exhibited which depends on the initial dislocation density, the presence of second-phase particles and the relative values of the recovery rate parameters and the velocity imposed by the testing machine. Numerical examples are provided for simple recovery models. (author)

  15. COMPARISON OF SOME PHYSICAL PARAMETERS OF WHOLE AND SCORED LISINOPRIL AND LISINOPRIL/ HYDROCHLORTHIAZIDE TABLETS

    Science.gov (United States)

    Vranić, Edina; Uzunović, Alija

    2008-01-01

    Tablets are one of the most popular and preferred solid dosage forms because they can be accurately dosed, easily manufactured and packaged on a large scale, have good physical and chemical stability, and can contribute to good patient compliance given their ease of administration. The ability to match doses to patients depends on the availability of multiple dose sizes and adequate dose-response information. These are not always provided, so splitting of the tablets is sometimes necessary, Tablet splitting is an accepted practice in dispensing medication, It has been used when a dosage form of the required strength is not available commercially. The aim of our study was to compare some physical parameters of whole and scored lisinopril and lisinopril/hydrochlorthiazide tablets and to accept or exclude their influence on the obtaining of required dosage. According to the results obtained, we may conclude that tablets from batch “I” “IL “III” and “IV” satisfied pharmacopeial requirements concerning crushing strength, friability, disintegration time and mass uniformity. The hardness testing showed acceptable reproducibility and indicate that the data variation was primarily from the irreversible changes in the structure of tablet samples. The act of compacting powders stores energy within the tablets, by shifting or compressing the intermolecular bonds within the particles. The tablets have a natural tendency to relax once pressure is removed, and this tendency works against the interparticle bonding formed during compression. Hardness testing procedure causes irreversible changes in this structure. PMID:19125715

  16. Refractive Status at Birth: Its Relation to Newborn Physical Parameters at Birth and Gestational Age

    Science.gov (United States)

    Varghese, Raji Mathew; Sreenivas, Vishnubhatla; Puliyel, Jacob Mammen; Varughese, Sara

    2009-01-01

    Background Refractive status at birth is related to gestational age. Preterm babies have myopia which decreases as gestational age increases and term babies are known to be hypermetropic. This study looked at the correlation of refractive status with birth weight in term and preterm babies, and with physical indicators of intra-uterine growth such as the head circumference and length of the baby at birth. Methods All babies delivered at St. Stephens Hospital and admitted in the nursery were eligible for the study. Refraction was performed within the first week of life. 0.8% tropicamide with 0.5% phenylephrine was used to achieve cycloplegia and paralysis of accommodation. 599 newborn babies participated in the study. Data pertaining to the right eye is utilized for all the analyses except that for anisometropia where the two eyes were compared. Growth parameters were measured soon after birth. Simple linear regression analysis was performed to see the association of refractive status, (mean spherical equivalent (MSE), astigmatism and anisometropia) with each of the study variables, namely gestation, length, weight and head circumference. Subsequently, multiple linear regression was carried out to identify the independent predictors for each of the outcome parameters. Results Simple linear regression showed a significant relation between all 4 study variables and refractive error but in multiple regression only gestational age and weight were related to refractive error. The partial correlation of weight with MSE adjusted for gestation was 0.28 and that of gestation with MSE adjusted for weight was 0.10. Birth weight had a higher correlation to MSE than gestational age. Conclusion This is the first study to look at refractive error against all these growth parameters, in preterm and term babies at birth. It would appear from this study that birth weight rather than gestation should be used as criteria for screening for refractive error, especially in developing

  17. Refractive status at birth: its relation to newborn physical parameters at birth and gestational age.

    Directory of Open Access Journals (Sweden)

    Raji Mathew Varghese

    Full Text Available Refractive status at birth is related to gestational age. Preterm babies have myopia which decreases as gestational age increases and term babies are known to be hypermetropic. This study looked at the correlation of refractive status with birth weight in term and preterm babies, and with physical indicators of intra-uterine growth such as the head circumference and length of the baby at birth.All babies delivered at St. Stephens Hospital and admitted in the nursery were eligible for the study. Refraction was performed within the first week of life. 0.8% tropicamide with 0.5% phenylephrine was used to achieve cycloplegia and paralysis of accommodation. 599 newborn babies participated in the study. Data pertaining to the right eye is utilized for all the analyses except that for anisometropia where the two eyes were compared. Growth parameters were measured soon after birth. Simple linear regression analysis was performed to see the association of refractive status, (mean spherical equivalent (MSE, astigmatism and anisometropia with each of the study variables, namely gestation, length, weight and head circumference. Subsequently, multiple linear regression was carried out to identify the independent predictors for each of the outcome parameters.Simple linear regression showed a significant relation between all 4 study variables and refractive error but in multiple regression only gestational age and weight were related to refractive error. The partial correlation of weight with MSE adjusted for gestation was 0.28 and that of gestation with MSE adjusted for weight was 0.10. Birth weight had a higher correlation to MSE than gestational age.This is the first study to look at refractive error against all these growth parameters, in preterm and term babies at birth. It would appear from this study that birth weight rather than gestation should be used as criteria for screening for refractive error, especially in developing countries where the

  18. How to classify plantar plate injuries: parameters from history and physical examination.

    Science.gov (United States)

    Nery, Caio; Coughlin, Michael; Baumfeld, Daniel; Raduan, Fernando; Mann, Tania Szejnfeld; Catena, Fernanda

    2015-01-01

    To find the best clinical parameters for defining and classifying the degree of plantar plate injuries. Sixty-eight patients (100 metatarsophalangeal joints) were classified in accordance with the Arthroscopic Anatomical Classification for plantar plate injuries and were divided into five groups (0 to IV). Their medical files were reviewed and the incidence of each parameter for the respective group was correlated. These parameters were: use of high heels, sports, acute pain, local edema, Mulder's sign, widening of the interdigital space, pain in the head of the corresponding metatarsal, touching the ground, "drawer test", toe grip and toe deformities (in the sagittal, coronal and transversal planes). There were no statistically significant associations between the degree of injury and use of high-heel shoes, sports trauma, pain at the head of the metatarsal, Mulder's sign, deformity in pronation or displacement in the transversal and sagittal planes (although their combination, i.e. "cross toe", showed a statistically significant correlation). Positive correlations with the severity of the injuries were found in relation to initial acute pain, progressive widening of the interdigital space, loss of "touching the ground", positive results from the "drawer test" on the metatarsophalangeal joint, diminished grip strength and toe deformity in supination. The "drawer test" was seen to be the more reliable and precise tool for classifying the degree of plantar plate injury, followed by "touching the ground" and rotational deformities. It is possible to improve the precision of the diagnosis and the predictions of the anatomical classification for plantar plate injuries through combining the clinical history and data from the physical examination.

  19. Prediction of changes in important physical parameters during composting of separated animal slurry solid fractions.

    Science.gov (United States)

    Chowdhury, Md Albarune; de Neergaard, Andreas; Jensen, Lars Stoumann

    2014-01-01

    Solid-liquid separation of animal slurry, with solid fractions used for composting, has gained interest recently. However, efficient composting of separated animal slurry solid fractions (SSFs) requires a better understanding of the process dynamics in terms of important physical parameters and their interacting physical relationships in the composting matrix. Here we monitored moisture content, bulk density, particle density and air-filled porosity (AFP) during composting of SSF collected from four commercially available solid-liquid separators. Composting was performed in laboratory-scale reactors for 30 days (d) under forced aeration and measurements were conducted on the solid samples at the beginning of composting and at 10-d intervals during composting. The results suggest that differences in initial physical properties of SSF influence the development of compost maximum temperatures (40-70 degreeC). Depending on SSF, total wet mass and volume losses (expressed as % of initial value) were up to 37% and 34%, respectively. After 30 d of composting, relative losses of total solids varied from 17.9% to 21.7% and of volatile solids (VS) from 21.3% to 27.5%, depending on SSF. VS losses in all composts showed different dynamics as described by the first-order kinetic equation. The estimated component particle density of 1441 kg m-3 for VS and 2625 kg m-3 for fixed solids can be used to improve estimates of AFP for SSF within the range tested. The linear relationship between wet bulk density and AFP reported by previous researchers held true for SSF.

  20. Comparison of parameters of bone profile and homocysteine in physically active and non-active postmenopausal females

    OpenAIRE

    Tariq, Sundus; Lone, Khalid Parvez; Tariq, Saba

    2016-01-01

    Background and objectives: Optimal physical activity is important in attaining a peak bone mass. Physically active women have better bone mineral density and reduce fracture risk as compared to females living a sedentary life. The objective of this study was to compare parameters of bone profile and serum homocysteine levels in physically active and non-active postmenopausal females. Methods: In this cross sectional study postmenopausal females between 50-70 years of age were recruited and di...

  1. Recommendations for a culturally relevant Internet-based tool to promote physical activity among overweight young African American women, Alabama, 2010-2011.

    Science.gov (United States)

    Durant, Nefertiti H; Joseph, Rodney P; Cherrington, Andrea; Cuffee, Yendelela; Knight, BernNadette; Lewis, Dwight; Allison, Jeroan J

    2014-01-16

    Innovative approaches are needed to promote physical activity among young adult overweight and obese African American women. We sought to describe key elements that African American women desire in a culturally relevant Internet-based tool to promote physical activity among overweight and obese young adult African American women. A mixed-method approach combining nominal group technique and traditional focus groups was used to elicit recommendations for the development of an Internet-based physical activity promotion tool. Participants, ages 19 to 30 years, were enrolled in a major university. Nominal group technique sessions were conducted to identify themes viewed as key features for inclusion in a culturally relevant Internet-based tool. Confirmatory focus groups were conducted to verify and elicit more in-depth information on the themes. Twenty-nine women participated in nominal group (n = 13) and traditional focus group sessions (n = 16). Features that emerged to be included in a culturally relevant Internet-based physical activity promotion tool were personalized website pages, diverse body images on websites and in videos, motivational stories about physical activity and women similar to themselves in size and body shape, tips on hair care maintenance during physical activity, and online social support through social media (eg, Facebook, Twitter). Incorporating existing social media tools and motivational stories from young adult African American women in Internet-based tools may increase the feasibility, acceptability, and success of Internet-based physical activity programs in this high-risk, understudied population.

  2. Environmental parameters of the Tennessee River in Alabama. 2: Physical, chemical, and biological parameters. [biological and chemical effects of thermal pollution from nuclear power plants on water quality

    Science.gov (United States)

    Rosing, L. M.

    1976-01-01

    Physical, chemical and biological water quality data from five sites in the Tennessee River, two in Guntersville Reservoir and three in Wheeler Reservoir were correlated with climatological data for three annual cycles. Two of the annual cycles are for the years prior to the Browns Ferry Nuclear Power Plant operations and one is for the first 14 months of Plant operations. A comparison of the results of the annual cycles indicates that two distinct physical conditions in the reservoirs occur, one during the warm months when the reservoirs are at capacity and one during the colder winter months when the reservoirs have been drawn-down for water storage during the rainy months and for weed control. The wide variations of physical and chemical parameters to which the biological organisms are subjected on an annual basis control the biological organisms and their population levels. A comparison of the parameters of the site below the Power plant indicates that the heated effluent from the plant operating with two of the three reactors has not had any effect on the organisms at this site. Recommendations given include the development of prediction mathematical models (statistical analysis) for the physical and chemical parameters under specific climatological conditions which affect biological organisms. Tabulated data of chemical analysis of water and organism populations studied is given.

  3. Changes of the more relevant PHTS parameters after the cleaning of the steam generators primary side at Embalse nuclear power plant

    International Nuclear Information System (INIS)

    Moreno, Carlos A.; Coutsiers, Ernesto; Acevedo, Paul; Pomerantz, Marcelo E.

    2003-01-01

    During the operation of the plant magnetite deposition occurs at the inner walls of Primary Heat Transport System (PHTS). This deposition is particularly significant at the U-tubes of steam generators. The consequence of this is the deterioration of heat transfer to the Secondary System. In order to minimize this impact, during the annual outage of 2000, the steam generators primary side cleaning by the SIVABLAST technique was carried out. This technique consists in blasting the inner walls with tiny stainless steel balls propelled by air at high pressure. This paper presents the change of the more relevant parameters of PHTS after that cleaning. The parameters analyzed and the main results are the following: 1) Inlet header temperature dropped 4.7 C degrees at full power; 2) Exit quality at the outlet headers decreased from 3,5% to 1,5%; 3) Global PHTS flow in single phase evaluated from: a) In-site instrumentation increased 4,6%; b) Thermalhydraulic code NUCIRC 1.0 increased 3,2%; c) measured flows at the instrumented fuel channels increased 4.4%. (author)

  4. Physical parameters of effluent from nuclear power station cooling towers; Fizicki parametri efluenata iz rashladnih tornjeva nuklearne elektrane

    Energy Technology Data Exchange (ETDEWEB)

    Vehauc, A [Institute of Nuclear Sciences VINCA, Belgrade (Yugoslavia)

    1992-07-01

    Physical parameters of the effluent dispersed from the wet cooling towers, i.e. mixture of the warm moist air with the entrained droplets are analysed. Understanding of the effluent physical parameters at the exit of cooling tower is important for prediction of the effluent dispersion in the environment. Mass and droplet diameter distributors of the drifted cooling water are measured in situ and also, drift eliminators are characterised experimentally. A new numerical method for heat and mass transfer evaluation in the cooling tower packing (fill) was developed, that leads to more accurate prediction for outlet air parameters in relation of plant power rate, cooling tower characteristics and atmospheric conditions. (author)

  5. Comparison of parameters of bone profile and homocysteine in physically active and non-active postmenopausal females.

    Science.gov (United States)

    Tariq, Sundus; Lone, Khalid Parvez; Tariq, Saba

    2016-01-01

    Optimal physical activity is important in attaining a peak bone mass. Physically active women have better bone mineral density and reduce fracture risk as compared to females living a sedentary life. The objective of this study was to compare parameters of bone profile and serum homocysteine levels in physically active and non-active postmenopausal females. In this cross sectional study postmenopausal females between 50-70 years of age were recruited and divided into two groups: Physically inactive (n=133) performing light physical activity and Physically active (n=34) performing moderate physical activity. Physical activity (in metabolic equivalents), bone mineral density and serum homocysteine levels were assessed. Spearman's rho correlation was applied to observe correlations. Two independent sample t test and Mann Whitney U test were applied to compare groups. P-value ≤ 0.05 was taken statistically significant. Parameters of bone profile were significantly higher and serum homocysteine levels were significantly lower in postmenopausal females performing moderate physical activity as compared to females performing light physical activity. Homocysteine was not significantly related to T-score and Z-score in both groups. Improving physical activity could be beneficial for improving the quality of bone, decreasing fracture risk and decreasing serum homocysteine levels.

  6. Therapeutic electrons bunch energy spectrums: correlation among physical parameters and quality; Espectros de energia de feixe de eletrons terapeuticos: correlacao entre parametros fisicos e qualidade

    Energy Technology Data Exchange (ETDEWEB)

    Fernandes, Rolando Fonseca

    1993-07-01

    A new approach was described for clinical and physical parameters used in radiotherapy planning and dosimetry, studying their dependencies on spectral widths. Two different models of clinical linear accelerators were used-Mevatron 74 (UNICAMP) and Mevatron 12 (HC/FMRP/Ribeirao Preto). Mevatron 74 produces beams with nominal energies from 5 up to 12 MeV and Mevatron 12 from 3 up to 11 MeV. It was verified that the values of clinical parameters expected from a semi-empirical theory differ from that obtained experimentally. Such differences are relevant from the point of view of the design of electron accelerators, as well as, of the target clinical results. (author)

  7. Association between obesity and various parameters of physical fitness in Korean students.

    Science.gov (United States)

    Kim, Jae-Woo; Seo, Dong-Il; Swearingin, B; So, Wi-Young

    2013-01-01

    The purpose of this study was to evaluate the association between the types of obesity classified according to the body mass index (BMI) and/or waist circumference (WC) and the various parameters of physical fitness in Korean college students. BMI, WC, and fitness assessments were performed on 726 male college student volunteers who visited a public health center in Seoul, Korea. Classification based on BMI and/or WC was established according to the data in the WHO's Asia-Pacific standard report, and the subjects were divided into the following 4 groups: (1) obese as determined by BMI, but not WC (BMI Obesity Group, BOG); (2) obese as determined by WC, but not BMI (WC Obesity Group, WOG); (3) obese as determined by both BMI and WC (BWOG); and (4) non-obese normal group (NG). Fitness assessment parameters such as cardiorespiratory endurance, cardiovascular function, muscular endurance, muscular strength, flexibility, power, agility, and balance were evaluated through the following measurements: time required to run 1.5 km, physical efficiency index (PEI), vital capacity (ℓ), push-ups (reps/2 min), sit-ups (reps/2 min), back strength (kg), grip strength (kg), sit and reach distance (cm), vertical jumps (cm), whole body reaction time (ms), side steps (reps/30 s), and maximum time of standing on 1 foot with closed eyes (s). The odds ratios (OR) (95% confidence interval [CI]) of the BOG and WOG for the 1.5-km run were 0.367 (0.192-0.701) and 0.168 (0.037-0.773), respectively; of the BWOG and WOG for vital capacity were 5.900 (1.298-26.827) and 5.364 (1.166-24.670), respectively; of the BOG for push-ups was 0.517 (0.279-0.959); of the WOG for back strength was 0.206 (0.045-0.945); of the BWOG and BOG for grip strength were 5.973 (1.314-27.157) and 2.036 (1.089-3.807), respectively; and of the BOG for the whole body reaction time was 0.405 (0.212-0.774), as compared to the NG. We conclude that all 3 types of obesity (classified into the BWOG, BOG, and WOG) result in

  8. Measurement of track opening contours of oblique incident 4He and 7Li-ions in CR-39: Relevance for calculation of track formation parameters

    International Nuclear Information System (INIS)

    Hermsdorf, D.; Reichelt, U.

    2010-01-01

    Solid State Nuclear Track Detectors (SSNTD) irradiated in realistic radiation fields exhibits after chemical etching very complex track images resulting from different species of particles and their energy spectra and randomly distributed angles of incidence or emission. Reading out such an etched detector surface with a light microscope, quite different track opening contours are observed. Beside the number of tracks, typically their major and minor axes are measured. In this work following problems arising from such experimental situations will be investigated: ·the measurement of track contour parameters for oblique incident 4 He and 7 Li-ions of different energies and angles in CR-39 detectors ·the theoretical description of the angular variation of both axes. ·the possibility to extract physical and spectroscopic information from major and minor track axes. This analysis is based on an intensive experimental program and the comprehensive study of theoretical models available for description of track revealing processes in CR-39.

  9. Spectroscopic and physical parameters of Galactic O-type stars. III. Mass discrepancy and rotational mixing

    Science.gov (United States)

    Markova, N.; Puls, J.; Langer, N.

    2018-05-01

    Context. Massive stars play a key role in the evolution of galaxies and our Universe. Aims: Our goal is to compare observed and predicted properties of single Galactic O stars to identify and constrain uncertain physical parameters and processes in stellar evolution and atmosphere models. Methods: We used a sample of 53 objects of all luminosity classes and with spectral types from O3 to O9.7. For 30 of these, we determined the main photospheric and wind parameters, including projected rotational rates accounting for macroturbulence, and He and N surface abundances, using optical spectroscopy and applying the model atmosphere code FASTWIND. For the remaining objects, similar data from the literature, based on analyses by means of the CMFGEN code, were used instead. The properties of our sample were then compared to published predictions based on two grids of single massive star evolution models that include rotationally induced mixing. Results: Any of the considered model grids face problem in simultaneously reproducing the stellar masses, equatorial gravities, surface abundances, and rotation rates of our sample stars. The spectroscopic masses derived for objects below 30 M⊙ tend to be smaller than the evolutionary ones, no matter which of the two grids have been used as a reference. While this result may indicate the need to improve the model atmosphere calculations (e.g. regarding the treatment of turbulent pressure), our analysis shows that the established mass problem cannot be fully explained in terms of inaccurate parameters obtained by quantitative spectroscopy or inadequate model values of Vrot on the zero age main sequence. Within each luminosity class, we find a close correlation of N surface abundance and luminosity, and a stronger N enrichment in more massive and evolved O stars. Additionally, we also find a correlation of the surface nitrogen and helium abundances. The large number of nitrogen-enriched stars above 30 M⊙ argues for rotationally

  10. Using the sampling method to propagate uncertainties of physical parameters in systems with fissile material

    International Nuclear Information System (INIS)

    Campolina, Daniel de Almeida Magalhães

    2015-01-01

    There is an uncertainty for all the components that comprise the model of a nuclear system. Assessing the impact of uncertainties in the simulation of fissionable material systems is essential for a realistic calculation that has been replacing conservative model calculations as the computational power increases. The propagation of uncertainty in a simulation using a Monte Carlo code by sampling the input parameters is recent because of the huge computational effort required. By analyzing the propagated uncertainty to the effective neutron multiplication factor (k eff ), the effects of the sample size, computational uncertainty and efficiency of a random number generator to represent the distributions that characterize physical uncertainty in a light water reactor was investigated. A program entitled GB s ample was implemented to enable the application of the random sampling method, which requires an automated process and robust statistical tools. The program was based on the black box model and the MCNPX code was used in and parallel processing for the calculation of particle transport. The uncertainties considered were taken from a benchmark experiment in which the effects in k eff due to physical uncertainties is done through a conservative method. In this work a script called GB s ample was implemented to automate the sampling based method, use multiprocessing and assure the necessary robustness. It has been found the possibility of improving the efficiency of the random sampling method by selecting distributions obtained from a random number generator in order to obtain a better representation of uncertainty figures. After the convergence of the method is achieved, in order to reduce the variance of the uncertainty propagated without increase in computational time, it was found the best number o components to be sampled. It was also observed that if the sampling method is used to calculate the effect on k eff due to physical uncertainties reported by

  11. Influence of physical parameters on radiation protection and image quality in intra-oral radiology

    Science.gov (United States)

    Belinato, W.; Souza, D. N.

    2011-10-01

    In the world of diagnostic imaging, radiography is an important supplementary method for dental diagnosis. In radiology, special attention must be paid to the radiological protection of patients and health professionals, and also to image quality for correct diagnosis. In Brazil, the national rules governing the operation of medical and dental radiology were specified in 1998 by the National Sanitary Surveillance Agency, complemented in 2005 by the guide "Medical radiology: security and performance of equipment." In this study, quality control tests were performed in public clinics with dental X-ray equipment in the State of Sergipe, Brazil, with consideration of the physical parameters that influence radiological protection and also the quality of images taken in intra-oral radiography. The accuracy of the exposure time was considered acceptable for equipment with digital timers. Exposure times and focal-spot size variations can lead to increased entrance dose. Increased dose has also been associated with visual processing of radiographic film, which often requires repeating the radiographic examination.

  12. Correlation between physical properties and ultrasonic relaxation parameters in transition metal tellurite glasses

    Science.gov (United States)

    Abd El-Moneim, A.

    2003-07-01

    The correlation between activation energy of ultrasonic relaxation process through the temperature range from 140 to 300 K and some physical properties has been investigated in pure TeO 2 and transition metal TeO 2-V 2O 5 and TeO 2-MoO 3 glasses according to Bridge and Patel's theory. The oxygen density (loss centers), number of two-well systems, hopping distance and mechanical relaxation time have been calculated in these glasses from the data of density, bulk modulus and stretching force constant of the glass. It has been found that the acoustic activation energy increased linearly with both the oxygen density and the number of two-well systems. The correlation between the acoustic activation energy and bulk modulus was achieved through the stretching force constant of the network and other structural parameters. Moreover, the experimental values of activation energy (V) agree well with those calculated from an empirical equation presented in this study in the form V=2.9×10 -7 F( F/ K) 3.37, where F is the stretching force constant of the glass and K is the experimental bulk modulus.

  13. V2676 Oph: Estimating Physical Parameters of a Moderately Fast Nova

    Science.gov (United States)

    Raj, A.; Pavana, M.; Kamath, U. S.; Anupama, G. C.; Walter, F. M.

    2018-03-01

    Using our previously reported observations, we derive some physical parameters of the moderately fast nova V2676 Oph 2012 #1. The best-fit Cloudy model of the nebular spectrum obtained on 2015 May 8 shows a hot white dwarf source with TBB≍1.0×105 K having a luminosity of 1.0×1038 erg/s. Our abundance analysis shows that the ejecta are significantly enhanced relative to solar, He/H=2.14, O/H=2.37, S/H=6.62 and Ar/H=3.25. The ejecta mass is estimated to be 1.42×10-5 M⊙. The nova showed a pronounced dust formation phase after 90 d from discovery. The J-H and H-K colors were very large as compared to other molecule- and dust-forming novae in recent years. The dust temperature and mass at two epochs have been estimated from spectral energy distribution fits to infrared photometry.

  14. Evaluation of some chemical and physical parameters of Sudanese crude oil

    International Nuclear Information System (INIS)

    Mohamed, Elsamoual Hamdn Alla

    2001-05-01

    In this study crude oil samples were collected from four fields, Higlieg, Alnar, Toma south, and Unity at Elmuglad basin. A total of 20 samples were analyzed for Na, Ca, Mn, Fe, Co, Ni, Zn, Cd, and Pb, using atomic absorption spectrophotometer (Aas). For these samples some physical parameters were determined using standard techniques employed by the American Society for Testing and Materials (Astm). The range of concentration for Na, Mg, Ca, Mn, Fe, Co, Ni, Cu, Zn, Cd, and Pb are 0.33-22.20, 0.0-3.29, 0.56-7.70, 0.13-0.74, 1.70-6.33, 0.43-1.21, 1.02-9.80, 0.16-7.05, 0.12-4.88, 0.09-0.58, 0.15-0.82. μg/g, respectively. The results were subjected to statistical analysis such multivariate regression and principal component analysis. These statistical techniques revealed that the element found in the crude oil can be considered as contributed by two sources the biological precursor of oil and surrounding rocks. Comparison of the data obtained in this work with the data reported in the literature showed that the trace elements contents of Sudanese crude oil in most cases has the lowest concentration of harmful element especially Ni, and Fe.(Author)

  15. Effect of Drawer Master Modeling of ZPPR15 Phase A Reactor Physics Experiment on Integral Parameter

    International Nuclear Information System (INIS)

    Yoo, Jae Woon; Kim, Sang Ji

    2011-01-01

    As a part of an International-Nuclear Engineering Research Initiative (I-NERI) Project, KAERI and ANL are analyzing the ZPPR-15 reactor physics experiments. The ZPPR-15 experiments were carried out in support of the Integral Fast Reactor (IFR) project. Because of lack of the experimental data, verifying and validating the core neutronics analysis code for metal fueled sodium cooled fast reactors (SFR) has been one of the big concerns. KAERI is developing the metal fuel loaded SFR and plans to construct the demonstration SFR by around 2028. Database built through this project and its result of analysis will play an important role in validating the SFR neutronics characteristics. As the first year work of I-NERI project, KAERI analyzed ZPPR-15 Phase A experiment among four phases (Phase A to D). The effect of a drawer master modeling on the integral parameter was investigated. The approximated benchmark configurations for each loading were constructed to be used for validating a deterministic code

  16. Development of An Autonomous Underwater Glider for Observing Physical Ocean Parameters in Indonesian Seas

    Science.gov (United States)

    Ajie Linarka, Utoyo; Riyanto Trilaksono, Bambang; Sagala, M. Faisal; Hidayat, Egi; Sopaheluwakan, Ardhasena; Rizal, Jose; Heriyanto, Eko; Amsal Harapan, Ferdika; Eka Syahputra Makmur, Erwin

    2017-04-01

    Conducting a sustained monitoring and surveying of physical ocean parameters for research or operational purposes using moorings and ships would require high cost. Development of an inexpensive instrument capable to perform such tasks not only could reduce cost and risks but also increase cruising range and depth. For that reason, a prototype of underwater glider was developed, named "GaneshBlue". GaneshBlue works based on gliding principles which utilizes pitch angle and buoyancy control for moving. For one gliding movement, GaneshBlue passed through 5 phases of surface, descent, transition, ascent and back to surface. The glider is equipped with basic navigation system and remote control, programmable survey planning, temperature and salinity sampling instruments, lithium batteries for power supply, and information processing software. A field test at the shallow water showed that GaneshBule has successfully demonstrated gliding and surfacing movements with surge motion speed reaching 20 cm s-1and 20 m in depths. During the field test the glider was also equipped with three instruments, i.e. Inertial Measurement Unit (IMU) to estimate glider's speed and orientation; MiniCT to acquire temperature and conductivity data; and Altisounder to determine its distance to sea surface and to seabed. In general, all the instruments performed well but filter algorithm needs to be implemented on data collection procedure to remove data outliers.

  17. Influence of physical parameters on radiation protection and image quality in intra-oral radiology

    International Nuclear Information System (INIS)

    Belinato, W.; Souza, D.N.

    2011-01-01

    In the world of diagnostic imaging, radiography is an important supplementary method for dental diagnosis. In radiology, special attention must be paid to the radiological protection of patients and health professionals, and also to image quality for correct diagnosis. In Brazil, the national rules governing the operation of medical and dental radiology were specified in 1998 by the National Sanitary Surveillance Agency, complemented in 2005 by the guide 'Medical radiology: security and performance of equipment.' In this study, quality control tests were performed in public clinics with dental X-ray equipment in the State of Sergipe, Brazil, with consideration of the physical parameters that influence radiological protection and also the quality of images taken in intra-oral radiography. The accuracy of the exposure time was considered acceptable for equipment with digital timers. Exposure times and focal-spot size variations can lead to increased entrance dose. Increased dose has also been associated with visual processing of radiographic film, which often requires repeating the radiographic examination.

  18. Influence of physical parameters on radiation protection and image quality in intra-oral radiology

    Energy Technology Data Exchange (ETDEWEB)

    Belinato, W. [Instituto Federal de Ensino Basico, Tecnico e Tecnologico da Bahia, Av. Amazonas, 1350-45030-220, Zabele, Vitoria da Conquista, BA (Brazil); Departamento de Fisica, Universidade Federal de Sergipe, Av. Marechal Rondon s/n, 49100-000 Rosa Elze, Sao Cristovao, SE (Brazil); Souza, D.N., E-mail: divanizi@ufs.br [Departamento de Fisica, Universidade Federal de Sergipe, Av. Marechal Rondon s/n, 49100-000 Rosa Elze, Sao Cristovao, SE (Brazil)

    2011-10-01

    In the world of diagnostic imaging, radiography is an important supplementary method for dental diagnosis. In radiology, special attention must be paid to the radiological protection of patients and health professionals, and also to image quality for correct diagnosis. In Brazil, the national rules governing the operation of medical and dental radiology were specified in 1998 by the National Sanitary Surveillance Agency, complemented in 2005 by the guide 'Medical radiology: security and performance of equipment.' In this study, quality control tests were performed in public clinics with dental X-ray equipment in the State of Sergipe, Brazil, with consideration of the physical parameters that influence radiological protection and also the quality of images taken in intra-oral radiography. The accuracy of the exposure time was considered acceptable for equipment with digital timers. Exposure times and focal-spot size variations can lead to increased entrance dose. Increased dose has also been associated with visual processing of radiographic film, which often requires repeating the radiographic examination.

  19. ADAPTIVE MESH REFINEMENT SIMULATIONS OF GALAXY FORMATION: EXPLORING NUMERICAL AND PHYSICAL PARAMETERS

    International Nuclear Information System (INIS)

    Hummels, Cameron B.; Bryan, Greg L.

    2012-01-01

    We carry out adaptive mesh refinement cosmological simulations of Milky Way mass halos in order to investigate the formation of disk-like galaxies in a Λ-dominated cold dark matter model. We evolve a suite of five halos to z = 0 and find a gas disk formation in each; however, in agreement with previous smoothed particle hydrodynamics simulations (that did not include a subgrid feedback model), the rotation curves of all halos are centrally peaked due to a massive spheroidal component. Our standard model includes radiative cooling and star formation, but no feedback. We further investigate this angular momentum problem by systematically modifying various simulation parameters including: (1) spatial resolution, ranging from 1700 to 212 pc; (2) an additional pressure component to ensure that the Jeans length is always resolved; (3) low star formation efficiency, going down to 0.1%; (4) fixed physical resolution as opposed to comoving resolution; (5) a supernova feedback model that injects thermal energy to the local cell; and (6) a subgrid feedback model which suppresses cooling in the immediate vicinity of a star formation event. Of all of these, we find that only the last (cooling suppression) has any impact on the massive spheroidal component. In particular, a simulation with cooling suppression and feedback results in a rotation curve that, while still peaked, is considerably reduced from our standard runs.

  20. Dynamics of cardiovascular parameters in combined aortic malformations under the influence of a physical therapy program during the rehabilitation process

    Directory of Open Access Journals (Sweden)

    Serhii Kalmykov

    2017-12-01

    Full Text Available Purpose: to study hemodynamic parameters and the reaction of the cardiovascular system to the dosed physical load of patients combined aortic defect with heart failure of the I degree under the influence of the complex physical therapy program developed by us during the rehabilitation process. Material & Methods: the study involved 26 middle-aged men with a diagnosis: combined aortic valve disease, HF I st. Result: dynamics of functional parameters of the cardiovascular system of patients under the influence of the physical therapy program is analyzed. Conclusion: the combination of morning hygienic gymnastics, therapeutic gymnastics, independent activities and dosed walking with a therapeutic massage contributes to the normalization of vascular tone, motor-vascular reflexes and blood pressure, increasing the tolerance of the cardiovascular system to physical activity.

  1. THE EFFECT OF SELECTED PHYSICAL AND CHEMICAL PARAMETERS ON MICROBIOLOGICAL STATUS OF THE VISTULA RIVER NEAR WARSAW

    OpenAIRE

    Janusz Augustynowicz; Mariusz Nierebiński; Małgorzata Zawada; Russel Russel

    2016-01-01

    The types of organisms present in water reservoirs depend on water purity and biochemical processes that occur. Therefore, one of the methods of water quality assessment is to determine its condition by determining the biological indicators, including microbiological parameters. The aim of the experiment presented in this paper was to investigate the effects of selected physical and chemical parameters of water samples from the Vistula River on the microbiological status of water. The experim...

  2. Effect of the addition of inulin on the nutritional, physical and sensory parameters of bread

    Directory of Open Access Journals (Sweden)

    Jacira Antonia Brasil

    2011-03-01

    Full Text Available The present work evaluated the effect of the addition of inulin on sensory, nutritional and physical parameters of white bread. Three formulations containing 0%, 6% and 10% of inulin were produced. Physical analyses of mass, volume, specific volume, density, centesimal composition, glycemic index (GI and qualitative descriptive sensory analyses, were carried out. The reduction in bread volume seen with 10% inulin was higher than that reported in the literature. Bread weight did not differ statistically. There was an 85% reduction in fat content for bread with 6% inulin and 86% for bread containing 10% inulin. Glycemic index in bread containing 10% inulin was lower than bread with 6% inulin and equal to inulin-free bread. A level of 6% inulin added to bread was regarded to yield good sensory quality.O presente trabalho avaliou o efeito da adição de inulina sobre os parâmetros sensoriais, nutricionais e físicos do pão branco. Foram desenvolvidas três formulações contendo 0%, 6% e10% de inulina. Foram realizadas análises físicas de massa, volume, volume específico, densidade, composição centesimal, índice glicêmico (IG e análise sensorial descritiva quantitativa. A redução do volume do pão contendo 10% de inulina foi maior que os dados da literatura. O peso do pão não diferiu estatisticamente. Houve uma redução de 85% do teor de gordura do pão com 6% de inulina e 86% para o pão com 10% de inulina. O índice glicêmico obtido no pão com 10% de inulina foi menor do que o com 6% de inulina e igual ao sem inulina. O pão adicionado de 6% de inulina foi tido como de boa qualidade sensorial.

  3. Moisture removal of paddy by agricultural residues: basic physical parameters and drying kinetics modeling

    Directory of Open Access Journals (Sweden)

    Saniso, E.

    2007-05-01

    Full Text Available The objectives of this research were to study basic physical parameters of three agricultural residues that could be used for prediction of paddy drying kinetics using desiccants, to investigate a suitable methodfor moisture reduction of fresh paddy using 3 absorbents, and to modify the drying model of Inoue et al. for determining the evolution of moisture transfer during the drying period. Rice husk, sago palm rachis andcoconut husk were used as moisture desiccants in these experiments. From the results, it was concluded that the apparent density of all adsorbents was a linear function of moisture content whilst an equilibriummoisture content equation following Hendersonís model gave the best fit to the experimental results. From studying the relationship between moisture ratio and drying time under the condition of drying temperaturesof 30, 50 and 70oC, air flow rate of 1.6 m/s and initial moisture content of absorbents of 15, 20 and 27% dry-basis, it was shown that the moisture ratio decreased when drying time increased. In addition, thethin-layer desiccant drying equation following of the Page model can appropriately explain the evolution of moisture content of paddy over the drying time. The diffusion coefficient of all absorbents, which was in therange of 1x10-8 to 6x10-8 m2/h, was relatively dependent on drying temperature and inversely related to drying time. The diffusivity of coconut husk had the highest value compared to the other absorbents.The simulating modified mathematical model to determine drying kinetics of paddy using absorption technique and the simulated results had good relation to the experimental results for all adsorbents.

  4. The influence of physical exertion on basic hematological parameters values and heart rate in trotters

    Directory of Open Access Journals (Sweden)

    Slijepčević Dajana

    2014-01-01

    Full Text Available One of very important prerequisites for achieving good results in races, in addition to genetic predisposition, quality training and good health, are optimal values for number of erythrocytes, concentration of haemoglobin and hematocrit, of which depends efficient oxygen supply of muscles during great efforts. The stated values, along with data on heart rate, are useful indicators of the degree of horse fitness and readiness for horse race. The influence of physical exertion on the values of basic hematological parameters as well as on heart rate, was investigated on 6 trotters, in training at the Belgrade racetrack (one head of Italian trotter, male, 3 years old; 3 heads of American trotter, male, 3,4 and 6 years old and two heads of Serbian trotter, female, 4 and 5 years old. The blood samples for hematological tests were taken by punction of jugular vein in resting phase - immediately before the commencement of work, after light trot warming for 3000 m and fast trot for 1000 m, with 30 minutes rest between the two runnings. The heart rate was monitored continuously by radio telemetry cardiometer, from the moment they were taken from their boxes and harnessing to the completion of work. The obtained results confirm the relationship between the rise of heart rate and hematocrit values: maximal hematocrit values were determined after the first running (0.49±0.05, in regard to 0.42±0.03 in resting phase, but 30 minutes after the second running there was a slight drop of hematocrit values (0.46±0.04. The blood samples in both cases were taken after fast trot during which there were recorded maximal pulse values, so in the moment of sampling the pulse lowered close to the values in resting - after the first running from 192.23±19.66, and after the second from 180.33±17.22 to 40.67±5.76.

  5. The effects of Ramadan fasting and physical activity on body composition and hematological biochemical parameters

    Directory of Open Access Journals (Sweden)

    Seyyed Reza Attarzadeh Hosseini

    2014-09-01

    Full Text Available Introduction: Hunger and reduction in regular energy intake can lead to a number of problems based on their intensity. For instance, low energy level can cause blood cell production to decline or it may pose a higher risk of anemia. It can also weaken the immune system and platelet aggregation or negatively affect clot formation. This study aimed to have a closer look at fasting and regular physical activity and their impacts on body composition and blood hematological-biochemical parameters among professional wrestlers. Method: In this semi-experimental study, 9 subjects were selected by convenience sampling. The selected training program included participation in this exerciseprogram, 90 min per session, 6 times per week for a period of one month. Blood samples were obtained four times: before the start of Ramadan, 2 weeks after the start, during the last week and 2 weeks after the end of Ramadan. To make intra-group comparison, repeated measure analysis of variance was used. For all statistical comparisons, the level of significance was considered at PResults: Body weight and red blood cell count (RBC dropped significantly at the end of Ramadan (Respectively P= 0.001 and P=0.034. However, the number of white blood cells (WBC and circulating platelets (PLT significantly increased during fasting (Respectively P= 0.048 and P=0.042. As a matter of fact, PLT and WBC were the only factors which dramatically increased during fasting. Intra-group variations of tetracycline (TC, low-density lipoprotein (LDL, LDL: high-density lipoprotein (HDL, triglyceride (TG: HDL and TC: HDL reduced at the end of Ramadan. However, HDL levels ​​drastically increased during fasting (P≤0.05. Conclusion: Based on the results of the research, despite being a regular activity and fasting has beneficial effects on lipid profile in athletes, however, they can with tangible changes in hematological factors may lead to weaken the immune system of athletes.

  6. Study of the Hollow Waveguides Physical Parameters Determined the Beam Shape Conservation of the Delivered Radiation

    International Nuclear Information System (INIS)

    Ben-David, M.; Inberg, A.; Katzir, A.; Croitoru, N.

    1999-01-01

    The modification of the laser source beam quality is one of the important factors effect the delivery of laser radiation by a waveguide. In this paper the results of input radiation coupling, radius of bending, length, cross section diameter, waveguide internal wall roughness and coupling lens focal length influence on the beam shape delivered from the flexible hollow waveguides are presented. The conditions for which the beam shape is near to that of the source were found. A theoretical model for the radiation propagation gives quantitative representation of relation between attenuation, beam profile, divergence and above indicated parameters was developed. In this model was supposed that the guiding is produced by multiple incidences on a metal (silver) layer and a dielectric (silver iodine) over layer, by refraction and reflection. The propagation of the rays was calculated using the physical laws of the geometrical optics. For the scattering calculations a random distribution of roughness centers on dielectric layer surface was considered. It was also supposed that the value of the cross section internal diameter (ID=d) was much larger than the transmitted wavelength. The experimental results have shown that losses due to absorption of the propagated radiation in the guiding layers, mainly (AgI), generate satellites of the laser source delivered fundamental Gaussian beam. Increasing of the hollow waveguide internal diameter decreases the attenuation and increases the deviation of beam shape from Gaussian. Off center coupling produce decreasing of the fundamental mode height and generation of the coupled Gaussian beam satellites. The waveguide internal wall roughness produce losses of the coupled radiation and beam profile deviations from that of the laser source. A good correspondence between the theoretical and experimental results obtained

  7. Print versus a culturally-relevant Facebook and text message delivered intervention to promote physical activity in African American women: a randomized pilot trial.

    Science.gov (United States)

    Joseph, Rodney P; Keller, Colleen; Adams, Marc A; Ainsworth, Barbara E

    2015-03-27

    African American women report insufficient physical activity and are disproportionally burdened by associated disease conditions; indicating the need for innovative approaches to promote physical activity in this underserved population. Social media platforms (i.e. Facebook) and text messaging represent potential mediums to promote physical activity. This paper reports the results of a randomized pilot trial evaluating a theory-based (Social Cognitive Theory) multi-component intervention using Facebook and text-messages to promote physical activity among African American women. Participants (N = 29) were randomly assigned to receive one of two multi-component physical activity interventions over 8 weeks: a culturally-relevant, Social Cognitive Theory-based, intervention delivered by Facebook and text message (FI) (n = 14), or a non-culturally tailored print-based intervention (PI) (n = 15) consisting of promotion brochures mailed to their home. The primary outcome of physical activity was assessed by ActiGraph GT3X+ accelerometers. Secondary outcomes included self-reported physical activity, physical activity-related psychosocial variables, and participant satisfaction. All randomized participants (N = 29) completed the study. Accelerometer measured physical activity showed that FI participants decreased sedentary time (FI = -74 minutes/week vs. PI = +118 minute/week) and increased light intensity (FI = +95 minutes/week vs. PI = +59 minutes/week) and moderate-lifestyle intensity physical activity (FI = + 27 minutes/week vs. PI = -34 minutes/week) in comparison to PI participants (all P's  .05). Results of secondary outcomes showed that in comparison to the PI, FI participants self-reported greater increases in moderate-to-vigorous physical activity (FI = +62 minutes/week vs. PI = +6 minutes/week; P = .015) and had greater enhancements in self-regulation for physical activity (P program to a friend

  8. Test calculations of physical parameters of the TRX,BETTIS and MIT critical assemblies according to the TRIFON program

    International Nuclear Information System (INIS)

    Kochurov, B.P.

    1980-01-01

    Results of calculations of physical parameters characterizing the TRX, MIT and BETTIS critical assemblies obtained according to the program TRIFON are presented. The program TRIFON permits to calculate the space-energy neutron distribution in the multigroup approximation in a multizone cylindrical cell. Results of comparison of the TRX, BETTIS and MIT crytical assembly parameters with experimental data and calculational results according to the Monte Carlo method are presented as well. Deviations of the parameters are in the range of 1.5-2 of experimental errors. Data on the interference of uranium 238 levels in the resonant neutron absorption in the cell are given [ru

  9. Using Biomedically Relevant Multimedia Content in an Introductory Physics Course for Life Science and Pre-Health Students

    Science.gov (United States)

    Mylott, Elliot; Kutschera, Ellynne; Dunlap, Justin C.; Christensen, Warren; Widenhorn, Ralf

    2016-01-01

    We will describe a one-quarter pilot algebra-based introductory physics course for pre-health and life science majors. The course features videos with biomedical experts and cogent biomedically inspired physics content. The materials were used in a flipped classroom as well as an all-online environment where students interacted with multimedia…

  10. Physical Inactivity from Adolescence to Young Adulthood: The Relevance of Various Dimensions of Inequality in a Swedish Longitudinal Sample

    Science.gov (United States)

    Wells, Laura; Nermo, Magnus; Östberg, Viveca

    2017-01-01

    As physical inactivity may track from adolescence to adulthood, it is important to identify social determinants of physical inactivity in early life. However, most studies have measured socioeconomic position as one dimension. We examine whether multiple dimensions of socioeconomic position, in addition to other dimensions of inequality (i.e.,…

  11. Adherence to a pedometer-based physical activity intervention following kidney transplant and impact on metabolic parameters.

    Science.gov (United States)

    Lorenz, Elizabeth C; Amer, Hatem; Dean, Patrick G; Stegall, Mark D; Cosio, Fernando G; Cheville, Andrea L

    2015-06-01

    The majority of kidney transplant recipients die from cardiovascular events. Physical activity may be a modifiable risk factor for cardiovascular disease following transplant. The goal of our study was to examine adherence to a physical activity intervention following kidney transplant and its impact on metabolic parameters. All patients who received a kidney transplant at our center between 12/2010 and 12/2011 received usual care (n = 162), while patients transplanted between 12/2011 and 1/2013 received a 90-day pedometer-based physical activity intervention (n = 145). Metabolic parameters were assessed at four and 12 months post-transplant. Baseline demographics and clinical management were similar between cohorts. Adherence to the prescription was 36.5%. Patients in the physical activity cohort had lower systolic and diastolic blood pressure four months post-transplant compared to the usual care cohort (122 ± 18 vs. 126 ± 16 mmHg, p = 0.049 and 73 ± 10 vs. 77 ± 9, p = 0.004) and less impaired fasting glucose (20.7% vs. 30.9%, p = 0.04). Twelve-month outcomes were not different between cohorts. Over one-third of our cohort adhered to a pedometer-based physical activity intervention following kidney transplant, and the intervention was associated with improved metabolic parameters. Further study of post-transplant exercise interventions and methods to optimize long-term adherence are needed. © 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  12. Cluster analysis to evaluate stable chemical elements and physical-chemical parameters behavior on uranium mining waste

    Energy Technology Data Exchange (ETDEWEB)

    Pereira, Wagner de Souza; Py Junior, Delcy de Azevedo; Goncalves, Simone, E-mail: wspereira@inb.gov.br [Unidade de Tratamento de Minerio (UTM/INB), Pocos de Caldas, MG (Brazil). Coordenacao de Protecao Radiologica. Grupo Multidisciplinar de Radioprotecao; Kelecom, Alphonse [Universidade Federal Fluminense (UFF), Niteroi, RJ (Brazil). Inst. de Biologia. Lab. de Radiobiologia e Radiometria Pedro Lopes dos Santos; Morais, Gustavo Ferrari de; Campelo, Emanuele Lazzaretti Cordova [Unidade de Tratamento de Minerio (UTM/INB), Pocos de Caldas, MG (Brazil). Coordenacao de Desenvolvimento de Processos; Dores, Luis Augusto de Carvalho Bresser [Unidade de Tratamento de Minerio (UTM/INB), Pocos de Caldas, MG (Brazil). Gerencia de Descomissionamento

    2011-07-01

    The Ore Treating Unit (UTM, in portuguese) is a deactivated uranium mine. A cluster analysis was used to evaluate the behavior of stable chemical elements and physical-chemical parameters in their effluents. The utilization of the cluster analysis proved itself effective in the assessment, allowing the identification of groups of chemical elements, physical-chemical parameters and their joint analysis (elements and parameters). As a result we may assert, based on data analysis, that there is a strong link between calcium and magnesium and between aluminum and rare-earth oxides on UTM's effluents. Sulphate was also identified as strongly linked to total and dissolved solids, and those to electrical conductivity. There were other associations, but not so strongly linked. Further gathering, to seasonal evaluation, are required in order to confirm those analysis. Additional statistical analysis (factor analysis) must be used to try to identify the origin of the identified groups on this analysis. (author)

  13. Cluster analysis to evaluate stable chemical elements and physical-chemical parameters behavior on uranium mining waste

    International Nuclear Information System (INIS)

    Pereira, Wagner de Souza; Py Junior, Delcy de Azevedo; Goncalves, Simone; Kelecom, Alphonse; Morais, Gustavo Ferrari de; Campelo, Emanuele Lazzaretti Cordova; Dores, Luis Augusto de Carvalho Bresser

    2011-01-01

    The Ore Treating Unit (UTM, in portuguese) is a deactivated uranium mine. A cluster analysis was used to evaluate the behavior of stable chemical elements and physical-chemical parameters in their effluents. The utilization of the cluster analysis proved itself effective in the assessment, allowing the identification of groups of chemical elements, physical-chemical parameters and their joint analysis (elements and parameters). As a result we may assert, based on data analysis, that there is a strong link between calcium and magnesium and between aluminum and rare-earth oxides on UTM's effluents. Sulphate was also identified as strongly linked to total and dissolved solids, and those to electrical conductivity. There were other associations, but not so strongly linked. Further gathering, to seasonal evaluation, are required in order to confirm those analysis. Additional statistical analysis (factor analysis) must be used to try to identify the origin of the identified groups on this analysis. (author)

  14. Multicomponent Exercise Improves Physical Functioning but Not Cognition and Hemodynamic Parameters in Elderly Osteoarthritis Patients Regardless of Hypertension

    Directory of Open Access Journals (Sweden)

    Hélio José Coelho-Júnior

    2018-01-01

    Full Text Available The present study aimed to investigate the impact of a 6-month multicomponent exercise program (MCEP on physical function, cognition, and hemodynamic parameters of elderly normotensive (NTS and hypertensive (HTS osteoarthritis patients. A total of 99 elderly osteoarthritis patients (44 NTS and 55 HTS were recruited and submitted to functional, cognitive, and hemodynamic evaluations before and after six months of a MCEP. The program of exercise was performed twice a week at moderate intensity. The physical exercises aggregated functional and walking exercises. Results indicate that 6 months of MCEP were able to improve one-leg stand and mobility (walking speeds of osteoarthritis patients regardless of hypertension. On the other hand, cognitive and hemodynamic parameters were not altered after the MCEP. The findings of the present study demonstrate that 6 months of MCEP were able to improve the physical functioning (i.e., usual and maximal walking speed and balance of osteoarthritis patients regardless of hypertensive condition.

  15. Experimental studies of keV energy neutron-induced reactions relevant to astrophysics and nuclear physics

    Energy Technology Data Exchange (ETDEWEB)

    Shima, T.; Kii, T.; Kikuchi, T.; Okazaki, F.; Kobayashi, T.; Baba, T.; Nagai, Y. [Tokyo Inst. of Tech. (Japan). Faculty of Science; Igashira, M.

    1997-03-01

    Nuclear reactions induced by keV energy neutrons provide a plenty of informations for studies of both astrophysics and nuclear physics. In this paper we will show our experimental studies of neutron- induced reactions of light nuclei in the keV energy region by means of a pulsed keV neutron beam and high-sensitivity detectors. Also we will discuss astrophysical and nuclear-physical consequences by using the obtained results. (author)

  16. Investigation on the Ultrasonic Nozzle Parameters Affecting Physical Properties of Tomato Powder

    Directory of Open Access Journals (Sweden)

    M. R Arjomandi

    2017-10-01

    average of the particles size except for dryer plates temperature (p<0.01 and on the moisture content (p<0.01. The mean comparison of these effects was done via LSD method. The effect of the temperature on the particle size was insignificant. The reason for this result is due to particles size that is an external parameter and is much related to the ultrasonic nozzle features. The reciprocal dual the flow rate in the generator power on the particles size was significant (p<0.05. The results analysis of the mean comparison indicated that particle size average of flow rate 13 ml min-1 is smaller than the flow rate 15 and 17 ml min-1. The least particles size mean is related to the samples which have been produced with 25 watts power as it has the significant difference with 37.5 and 50 watts. The least particle size average produced with 25 watts power and the flow rate of 13 ml min-1 and 13.8 micrometers was obtained. Results of the means comparison indicated that the moisture content of the samples with 25 watts of power produced less moisture content which was significant (p<0.01. Moisture content is strongly related to the particle size and it makes the water transfer difficult and moisture content of the samples which is produced in this power is less. Thus, when the sonication power increases, the moisture content increases too. The samples which were produced in flow rate 13 ml min-1 showed less moisture content than other flow rate levels. Results showed increasing temperature caused decreasing moisture content of the samples. This is because the exchange heat between the powders and the environment has been increased and more moisture was lost therefore, the moisture content decreases. Conclusions The results of this study indicated that the parameters such as ultrasoud power, flow rate, and the dryer plates temperature on the physical properties of tomato powder like the particles size average and moisture content were significant (p<0.01 except for dryer plates

  17. Joint optimization of physical layer parameters and routing in wireless mesh networks

    KAUST Repository

    Tobagi, Fouad A.

    2010-06-01

    Achieving the best performance in a wireless mesh network requires striking the right balance between the performance of links carrying traffic and the extent of spatial reuse of the wireless medium. The performance of a link depends on its transmit power and data rate as well as the level of interference caused by concurrent transmissions in the network; the latter is function of the Energy Detect (ED) threshold that determines when a node may access the medium. Which links in the network carry traffic is determined by the routing function; routing selects paths according to a link metric that reflects the relative performance of links (e.g., the expected transmission time of a packet on the link). In this paper, we seek to maximize end-to-end network throughput by jointly optimizing physical layer parameters and routing. We consider a random topology with a uniform node density. We consider that the signal attenuation between a pair of nodes is determined by a power law path loss model with an exponent equal to 3. Our findings are as follows. Consider first that the same transmit power and same data rate are used on all links. For any transmit power, data rate and ED threshold setting, the highest feasible load is obtained when the level of interference experienced by links used by routing is the highest possible. For a given transmit power and data rate setting, there is an optimum ED threshold that maximizes network performance. At the optimum ED threshold and maximum load, the range of link lengths used by routing is the lowest possible given the topology and routing metric used. With an ED threshold higher than the optimum, the same range of links is used by routing; however, the highest feasible load in this case is lower due to the fact that concurrent transmitters are allowed to be closer. With a lower ED threshold, concurrent transmitters are forced to be farther apart, and thus longer links become more attractive; as a result, the range of link lengths

  18. Joint optimization of physical layer parameters and routing in wireless mesh networks

    KAUST Repository

    Tobagi, Fouad A.; Hira, Mukesh M.

    2010-01-01

    Achieving the best performance in a wireless mesh network requires striking the right balance between the performance of links carrying traffic and the extent of spatial reuse of the wireless medium. The performance of a link depends on its transmit power and data rate as well as the level of interference caused by concurrent transmissions in the network; the latter is function of the Energy Detect (ED) threshold that determines when a node may access the medium. Which links in the network carry traffic is determined by the routing function; routing selects paths according to a link metric that reflects the relative performance of links (e.g., the expected transmission time of a packet on the link). In this paper, we seek to maximize end-to-end network throughput by jointly optimizing physical layer parameters and routing. We consider a random topology with a uniform node density. We consider that the signal attenuation between a pair of nodes is determined by a power law path loss model with an exponent equal to 3. Our findings are as follows. Consider first that the same transmit power and same data rate are used on all links. For any transmit power, data rate and ED threshold setting, the highest feasible load is obtained when the level of interference experienced by links used by routing is the highest possible. For a given transmit power and data rate setting, there is an optimum ED threshold that maximizes network performance. At the optimum ED threshold and maximum load, the range of link lengths used by routing is the lowest possible given the topology and routing metric used. With an ED threshold higher than the optimum, the same range of links is used by routing; however, the highest feasible load in this case is lower due to the fact that concurrent transmitters are allowed to be closer. With a lower ED threshold, concurrent transmitters are forced to be farther apart, and thus longer links become more attractive; as a result, the range of link lengths

  19. Analysis of the Relationship Between Physical Environmental Parameters and Beach Water Quality in a Subtropical Setting

    Science.gov (United States)

    Zhu, X.; Wang, J. D.; Elmir, S.; Solo-Gabriele, H. M.; Wright, M. E.; Abdelzaher, A.

    2006-12-01

    Fecal Indicator Bacteria(FIB) are found in high concentrations in sewage water, and thus are used to indicate whether there is fecal material related pathogen present and to determine whether a beach is safe for recreational use. Studies have shown, however, in subtropical regions, FIB concentrations above EPA standards may be present in the absence of known point sources of human or animal waste, thus reducing the efficacy of FIB beach monitoring programs. An interdisciplinary study is being conducted in Miami, Florida , the goal is to understand the sources and behavior of FIB on a beach without point source loads and also to improve beach health hazard warnings in subtropical regions. This study, examines relationship between enterococci (EPA recommended FIB for use in marine water) and physical environmental parameters such as rain, tide and wind. FIB data employed include Florida Department of Health weekly beach monitoring enterococci (ENT) data during a five year period and a two-day experiment with hourly sampling at Hobie Cat Beach on Virginia Key in the Miami metropolitan area. The environmental data consist of wind from a nearby CMAN tower, and local rain and tide. The analysis also includes data from nearby beaches monitored by the Health Department. Results show the correlation coefficient between ENT and tide at Hobie Cat Beach is positive but not significant(r=0.17). Rain events have a significant influence on ENT at Hobie Cat Beach, with a correlation coefficient of up to 0.7 while at other beaches the correlation is less than 0.2. Reasons for this aberration are being investigated. Although this is the only beach allowing dogs there are other factors of possible importance, such as tidal flats frequented by birds and weaker water circulation and exchange at this beach facing a bay rather than the ocean. Higher ENT levels (> 300CFU/100ml water) are more likely (67% of the time) to be associated with periods of onshore winds, which may affect the

  20. SHORT COMMUNICATION: Status of Physical Fitness Index (PFI % and Anthropometric Parameters in Residential School Children Compared to Nonresidential School Children

    Directory of Open Access Journals (Sweden)

    Jyoti P Khodnapur

    2012-07-01

    Full Text Available Background: Physical fitness is the prime criterion for survival, to achieve any goal and to lead a healthy life. Effect of exercise to have a good physical fitness is well known since ancient Vedas. Physical fitness can be recorded by cardiopulmonary efficiency test like Physical Fitness Index (PFI % which is a powerful indicator of cardiopulmonary efficiency. Regular exercise increases PFI by increasing oxygen consumption. Residential school children are exposed to regular exercise and nutritious food under the guidance. Aims and Objectives: Our study is aimed to compare the physical fitness index status and anthropometric parameters in Residential Sainik (n=100 school children compared to Non-Residential (n=100 school children (aged between 12-16 years of Bijapur. Material and Methods: PFI was measured by Harvard Step Test [1]. TheAnthropometrical parameters like Height (cms, Weight (Kg, Body Surface Area (BSA in sq.mts, Body Mass Index (BMI in Kg/m2, Mid Arm Circumference (cms, Chest Circumference (cms and Abdominal Circumference (cms were recorded. Results: Mean score of PFI(%, Height(cms, Weight(Kg, BSA(sq.mts, BMI(Kg/m2, Mid Arm Circumference(cms, Chest Circumference (cms and Abdominal Circumference (cms were significantly higher (p=0.000 in Residential school children compared to Non Residential school children. In conclusion regular exercise and nutritious diet under the guidance increases the physical fitness and growth in growing children.

  1. Adversarial Tuning of Perturbative Parameters in Non-Differentiable Physics Simulators

    CERN Multimedia

    CERN. Geneva

    2018-01-01

    In this contribution, we present a method for tuning perturbative parameters in Monte Carlo simulation using a classifier loss in high dimensions. We use an LSTM trained on the radiation pattern inside jets to learn the parameters of the final state shower in the Pythia Monte Carlo generator. This represents a step forward compared to unidimensional distributional template-matching methods.

  2. Revealing the physical insight of a length-scale parameter in metamaterials by exploiting the variational formulation

    Science.gov (United States)

    Abali, B. Emek

    2018-04-01

    For micro-architectured materials with a substructure, called metamaterials, we can realize a direct numerical simulation in the microscale by using classical mechanics. This method is accurate, however, computationally costly. Instead, a solution of the same problem in the macroscale is possible by means of the generalized mechanics. In this case, no detailed modeling of the substructure is necessary; however, new parameters emerge. A physical interpretation of these metamaterial parameters is challenging leading to a lack of experimental strategies for their determination. In this work, we exploit the variational formulation based on action principles and obtain a direct relation between a parameter used in the kinetic energy and a metamaterial parameter in the case of a viscoelastic model.

  3. Top 10 Research Questions Related to Growth and Maturation of Relevance to Physical Activity, Performance, and Fitness

    Science.gov (United States)

    Malina, Robert M.

    2014-01-01

    Growth, maturation, and development dominate the daily lives of children and adolescents for approximately the first 2 decades of life. Growth and maturation are biological processes, while development is largely a behavioral process. The 3 processes occur simultaneously and interact. They can be influenced by physical activity and also can…

  4. Space flight research relevant to health, physical education, and recreation: With particular reference to Skylab's life science experiments

    Science.gov (United States)

    Vanhuss, W. D.; Heusner, W. W.

    1979-01-01

    Data collected in the Skylab program relating to physiological stresses is presented. Included are routine blood measures used in clinical medicine as research type endocrine analyses to investigate the metabolic/endocrine responses to weightlessness. The daily routine of physical exercise, coupled with appropriate dietary intake, sleep, work, and recreation periods were considered essential in maintaining the crew's health and well being.

  5. Estimating Parameters in Physical Models through Bayesian Inversion: A Complete Example

    KAUST Repository

    Allmaras, Moritz; Bangerth, Wolfgang; Linhart, Jean Marie; Polanco, Javier; Wang, Fang; Wang, Kainan; Webster, Jennifer; Zedler, Sarah

    2013-01-01

    All mathematical models of real-world phenomena contain parameters that need to be estimated from measurements, either for realistic predictions or simply to understand the characteristics of the model. Bayesian statistics provides a framework

  6. A meta-analysis of the abscopal effect in preclinical models: Is the biologically effective dose a relevant physical trigger?

    Directory of Open Access Journals (Sweden)

    Raffaella Marconi

    Full Text Available Preclinical in vivo studies using small animals are considered crucial in translational cancer research and clinical implementation of novel treatments. This is of paramount relevance in radiobiology, especially for any technological developments permitted to deliver high doses in single or oligo-fractionated regimens, such as stereotactic ablative radiotherapy (SABR. In this context, clinical success in cancer treatment needs to be guaranteed, sparing normal tissue and preventing the potential spread of disease or local recurrence. In this work we introduce a new dose-response relationship based on relevant publications concerning preclinical models with regard to delivered dose, fractionation schedule and occurrence of biological effects on non-irradiated tissue, abscopal effects.We reviewed relevant publications on murine models and the abscopal effect in radiation cancer research following PRISMA methodology. In particular, through a log-likelihood method, we evaluated whether the occurrence of abscopal effects may be related to the biologically effective dose (BED. To this aim, studies accomplished with different tumor histotypes were considered in our analysis including breast, colon, lung, fibrosarcoma, pancreas, melanoma and head and neck cancer. For all the tumors, the α / β ratio was assumed to be 10 Gy, as generally adopted for neoplastic cells.Our results support the hypothesis that the occurrence rate of abscopal effects in preclinical models increases with BED. In particular, the probability of revealing abscopal effects is 50% when a BED of 60 Gy is generated.Our study provides evidence that SABR treatments associated with high BEDs could be considered an effective strategy in triggering the abscopal effect, thus shedding light on the promising outcomes revealed in clinical practice.

  7. Investigation of the effect of physical parameters on the design of tumour targeting agents

    Science.gov (United States)

    Casey, Joanne Lois

    Tumour targeting using radiolabelled antibodies for radioimmunodetection (RAID) and radioimmunotherapy (RIT) has been studied for many years. The main factors that have limited clinical success are low tumour uptake, immunogenicity and poor therapeutic ratios. This thesis has applied current technology to make advances in this area of research. The effect of physical parameters (antibody size, valency, affinity and charge) on the design of tumour targeting agents was studied by constructing divalent (DFM) and trivalent (TFM) forms of the murine anti-CEA antibody A5B7 Fab' by chemical cross-linking. This involves partial reduction of the hinge disulphides to expose thiol (-SH) groups and subsequent reaction with a maleimide cross-linker to form a thioether bond at the hinge region. Previous studies have suggested that the stability of thioether bonds is superior to naturally occurring disulphide bonds present at the hinge region of IgG and F(ab')2. The aim was to compare the functional affinities and in vivo tumour targeting in nude mice bearing human tumour xenografts of DFM and TFM to similar sized parent IgG and F(ab')2. Radiolabelling with 131I and 90Y was also compared with a view to determine which combination would be optimal for RIT. Results clearly demonstrated a significantly faster on-rate of DFM compared to all other antibody forms and estimated dosimetry analysis suggested that DFM would be the most suitable antibody form radiolabelled with 131I for RIT. Both F(ab')2 and DFM showed high kidney uptake levels on labelling with which is unacceptable for RIT. Despite the improved tumour: blood ratios for TFM, the increased estimated dose to normal tissues and lower therapeutic effect in RIT studies suggests that the most promising combination with the radionuclide appears to be IgG. A humanised version of A5B7 hFab' has been constructed previously in order to reduce its immunogenicity in man. The in vivo stability of hDFM proved to be superior to hF(ab')2

  8. Effect of Dipping and Vacuum Impregnation Coating Techniques with Alginate Based Coating on Physical Quality Parameters of Cantaloupe Melon.

    Science.gov (United States)

    Senturk Parreidt, Tugce; Schmid, Markus; Müller, Kajetan

    2018-04-01

    Edible coating based on sodium alginate solution was applied to fresh-cut cantaloupe melon by dipping and vacuum impregnation coating methods. One aim of this work is to produce more technical information concerning these conventional and novel coating processes. For this purpose, the effect of various coating parameters (dipping time, draining time, time length of the vacuum period, vacuum pressure, atmospheric restoration time) with several levels on physical quality parameters (percentage of weight gain, color, and texture) of noncoated and coated samples were determined in order to define adequate coating process parameters to achieve a successful coating application. Additionally, the effects of dipping and vacuum impregnation processes were compared. Both processes improved the firmness of the melon pieces. However, vacuum impregnation application had higher firmness and weight gain results, and had significant effect (P coating technique and the parameters used significantly affect the physical quality characteristics of coated food products. The work presented produced more technical information concerning dipping and vacuum impregnation coating techniques, along with evaluating the effects of various coating parameters with several levels. The results revealed that vacuum impregnation technique is a successful coating method; however the effects should be carefully assessed for each product. © 2018 Institute of Food Technologists®.

  9. THE EFFECT OF SELECTED PHYSICAL AND CHEMICAL PARAMETERS ON MICROBIOLOGICAL STATUS OF THE VISTULA RIVER NEAR WARSAW

    Directory of Open Access Journals (Sweden)

    Janusz Augustynowicz

    2016-02-01

    Full Text Available The types of organisms present in water reservoirs depend on water purity and biochemical processes that occur. Therefore, one of the methods of water quality assessment is to determine its condition by determining the biological indicators, including microbiological parameters. The aim of the experiment presented in this paper was to investigate the effects of selected physical and chemical parameters of water samples from the Vistula River on the microbiological status of water. The experiment was conducted in water samples collected in the central part of the Vistula River in Warsaw. The analyses of selected parameters were performed once a month throughout the year. Microbiological tests included: number of nitrogen fixing bacteria, MPN nitrifying bacteria, MPN sulfate-reducing bacteria. Physical and chemical parameters such as temperature, pH and total nitrogen content were determined in water samples. The results showed a correlation between temperature, pH and microbiological parameters. However, there was no significant correlation between the number of tested microorganisms and the concentration of total nitrogen in water samples.

  10. A Toolkit to Study Sensitivity of the Geant4 Predictions to the Variations of the Physics Model Parameters

    Energy Technology Data Exchange (ETDEWEB)

    Fields, Laura [Fermilab; Genser, Krzysztof [Fermilab; Hatcher, Robert [Fermilab; Kelsey, Michael [SLAC; Perdue, Gabriel [Fermilab; Wenzel, Hans [Fermilab; Wright, Dennis H. [SLAC; Yarba, Julia [Fermilab

    2017-08-21

    Geant4 is the leading detector simulation toolkit used in high energy physics to design detectors and to optimize calibration and reconstruction software. It employs a set of carefully validated physics models to simulate interactions of particles with matter across a wide range of interaction energies. These models, especially the hadronic ones, rely largely on directly measured cross-sections and phenomenological predictions with physically motivated parameters estimated by theoretical calculation or measurement. Because these models are tuned to cover a very wide range of possible simulation tasks, they may not always be optimized for a given process or a given material. This raises several critical questions, e.g. how sensitive Geant4 predictions are to the variations of the model parameters, or what uncertainties are associated with a particular tune of a Geant4 physics model, or a group of models, or how to consistently derive guidance for Geant4 model development and improvement from a wide range of available experimental data. We have designed and implemented a comprehensive, modular, user-friendly software toolkit to study and address such questions. It allows one to easily modify parameters of one or several Geant4 physics models involved in the simulation, and to perform collective analysis of multiple variants of the resulting physics observables of interest and comparison against a variety of corresponding experimental data. Based on modern event-processing infrastructure software, the toolkit offers a variety of attractive features, e.g. flexible run-time configurable workflow, comprehensive bookkeeping, easy to expand collection of analytical components. Design, implementation technology, and key functionalities of the toolkit are presented and illustrated with results obtained with Geant4 key hadronic models.

  11. A Parameter Identification Method for Helicopter Noise Source Identification and Physics-Based Semi-Empirical Modeling

    Science.gov (United States)

    Greenwood, Eric, II; Schmitz, Fredric H.

    2010-01-01

    A new physics-based parameter identification method for rotor harmonic noise sources is developed using an acoustic inverse simulation technique. This new method allows for the identification of individual rotor harmonic noise sources and allows them to be characterized in terms of their individual non-dimensional governing parameters. This new method is applied to both wind tunnel measurements and ground noise measurements of two-bladed rotors. The method is shown to match the parametric trends of main rotor Blade-Vortex Interaction (BVI) noise, allowing accurate estimates of BVI noise to be made for operating conditions based on a small number of measurements taken at different operating conditions.

  12. Body mass index predicts selected physical fitness attributes but is not associated with performance on military relevant tasks in U.S. Army Soldiers.

    Science.gov (United States)

    Pierce, Joseph R; DeGroot, David W; Grier, Tyson L; Hauret, Keith G; Nindl, Bradley C; East, Whitfield B; McGurk, Michael S; Jones, Bruce H

    2017-11-01

    Army body composition standards are based upon validated criteria; however, certain field-expedient methodologies (e.g., weight-for-height, body mass index [BMI]) may disqualify individuals from service who may otherwise excel on physical performance and military-relevant tasks. The purpose was to assess soldier physical performance and military-specific task/fitness performance stratified by BMI. Cross-sectional observational study. Male (n=275) and female (n=46) soldiers performed a wide-array of physical fitness tests and military-specific tasks, including the Army physical fitness test (APFT). Within-sex performance data were analyzed by BMI tertile stratification or by Army Body Composition Program (ABCP) weight-for-height (calculated BMI) screening standards using ANOVA/Tukey post-hoc or independent t-tests, respectively. BMI stratification (higher vs. lower BMI) was associated with significant improvements in muscular strength and power, but also with decrements in speed/agility in male and female soldiers. Within the military specific tasks, a higher BMI was associated with an increased APFT 2-Mile Run time; however, performance on a 1600-m Loaded March or a Warrior Task and Battle Drill obstacle course was not related to BMI in either sex. Male and Female soldiers who did not meet ABCP screening standards demonstrated a slower 2-Mile Run time; however, not meeting the ABCP BMI standard only affected a minimal number (∼6%) of soldiers' ability to pass the APFT. Military body composition standards require a careful balance between physical performance, health, and military readiness. Allowances should be considered where tradeoffs exist between body composition classifications and performance on physical tasks with high military relevance. Published by Elsevier Ltd.

  13. A physical detail relevant to the Savic-Kasanin theory of behaviour of materials under high pressure

    International Nuclear Information System (INIS)

    Celebonovic, V.

    1982-01-01

    P. Savic and R. Kasanin have proposed a theory of behaviour of materials under high pressure (Savic, 1981). Their theory can be applied to the explanation of the internal structures of planets and stars. The author proposes, a simple method for the calculation of the internal temperatures of the terrestrial planets. All the parameters needed for the application of the method can be obtained from the SK theory. (Auth.)

  14. PHYSICS OF A PARTIALLY IONIZED GAS RELEVANT TO GALAXY FORMATION SIMULATIONS-THE IONIZATION POTENTIAL ENERGY RESERVOIR

    Energy Technology Data Exchange (ETDEWEB)

    Vandenbroucke, B.; De Rijcke, S.; Schroyen, J. [Department of Physics and Astronomy, Ghent University, Krijgslaan 281, S9, B-9000 Gent (Belgium); Jachowicz, N. [Department of Physics and Astronomy, Ghent University, Proeftuinstraat 86, B-9000 Gent (Belgium)

    2013-07-01

    Simulation codes for galaxy formation and evolution take on board as many physical processes as possible beyond the standard gravitational and hydrodynamical physics. Most of this extra physics takes place below the resolution level of the simulations and is added in a ''sub-grid'' fashion. However, these sub-grid processes affect the macroscopic hydrodynamical properties of the gas and thus couple to the ''on-grid'' physics that is explicitly integrated during the simulation. In this paper, we focus on the link between partial ionization and the hydrodynamical equations. We show that the energy stored in ions and free electrons constitutes a potential energy term which breaks the linear dependence of the internal energy on temperature. Correctly taking into account ionization hence requires modifying both the equation of state and the energy-temperature relation. We implemented these changes in the cosmological simulation code GADGET2. As an example of the effects of these changes, we study the propagation of Sedov-Taylor shock waves through an ionizing medium. This serves as a proxy for the absorption of supernova feedback energy by the interstellar medium. Depending on the density and temperature of the surrounding gas, we find that up to 50% of the feedback energy is spent ionizing the gas rather than heating it. Thus, it can be expected that properly taking into account ionization effects in galaxy evolution simulations will drastically reduce the effects of thermal feedback. To the best of our knowledge, this potential energy term is not used in current simulations of galaxy formation and evolution.

  15. PHYSICS OF A PARTIALLY IONIZED GAS RELEVANT TO GALAXY FORMATION SIMULATIONS—THE IONIZATION POTENTIAL ENERGY RESERVOIR

    International Nuclear Information System (INIS)

    Vandenbroucke, B.; De Rijcke, S.; Schroyen, J.; Jachowicz, N.

    2013-01-01

    Simulation codes for galaxy formation and evolution take on board as many physical processes as possible beyond the standard gravitational and hydrodynamical physics. Most of this extra physics takes place below the resolution level of the simulations and is added in a ''sub-grid'' fashion. However, these sub-grid processes affect the macroscopic hydrodynamical properties of the gas and thus couple to the ''on-grid'' physics that is explicitly integrated during the simulation. In this paper, we focus on the link between partial ionization and the hydrodynamical equations. We show that the energy stored in ions and free electrons constitutes a potential energy term which breaks the linear dependence of the internal energy on temperature. Correctly taking into account ionization hence requires modifying both the equation of state and the energy-temperature relation. We implemented these changes in the cosmological simulation code GADGET2. As an example of the effects of these changes, we study the propagation of Sedov-Taylor shock waves through an ionizing medium. This serves as a proxy for the absorption of supernova feedback energy by the interstellar medium. Depending on the density and temperature of the surrounding gas, we find that up to 50% of the feedback energy is spent ionizing the gas rather than heating it. Thus, it can be expected that properly taking into account ionization effects in galaxy evolution simulations will drastically reduce the effects of thermal feedback. To the best of our knowledge, this potential energy term is not used in current simulations of galaxy formation and evolution.

  16. Effects of space-dependent cross sections on core physics parameters for compact fast spectrum space power reactors

    International Nuclear Information System (INIS)

    Lell, R.M.; Hanan, N.A.

    1987-01-01

    Effects of multigroup neutron cross section generation procedures on core physics parameters for compact fast spectrum reactors have been examined. Homogeneous and space-dependent multigroup cross section sets were generated in 11 and 27 groups for a representative fast reactor core. These cross sections were used to compute various reactor physics parameters for the reference core. Coarse group structure and neglect of space-dependence in the generation procedure resulted in inaccurate computations of reactor flux and power distributions and in significant errors regarding estimates of core reactivity and control system worth. Delayed neutron fraction was insensitive to cross section treatment, and computed reactivity coefficients were only slightly sensitive. However, neutron lifetime was found to be very sensitive to cross section treatment. Deficiencies in multigroup cross sections are reflected in core nuclear design and, consequently, in system mechanical design

  17. Effect of Gamma Irradiation Doses and Micro Elements on Some Physical, Chemical and Crop Parameters of Vigna sinensis

    International Nuclear Information System (INIS)

    Hussein, L.O.S.; Saleh, O.I.; Abdullah, M.I.

    2011-01-01

    The present work aim to expose Vigna sinensis L. (cowpea) seeds to gamma rays at dose levels 40, 80 and 120 Gy and to spray the growing plants with micro elements; boron (B) and zinc (Zn) after one month of planting; until harvest date, for increasing crop quality and quantity. Some physical parameters, some chemical analysis, the yield and net percentage of the produced crop were evaluated. The result obtained refer that, the 40 Gy dose enhanced most of physical, chemical and yield parameters of cowpea crop. Moreover, the harvested crop was increased and improved in case of those produced from plants sprayed with different concentrations of B or Zn plus 40 Gy dose as compared with the other treatments used followed by the dose of 80 Gy. Meanwhile, the dose of 120 Gy gave the least enhancement on the quality and quantity of the aforementioned treatments in cowpea crop

  18. Comparison of Physical Fitness Parameters with EUROFIT Test Battery of Male Adolescent Soccer Players and Sedentary Counterparts

    Directory of Open Access Journals (Sweden)

    Özgür ERİKOĞLU

    2015-09-01

    Full Text Available The aim of this study was to compare physical fitness parameters of male adolescent soccer players and sedentary counterparts. A total of 26 male adolescents participated in this study voluntarily: Active soccer players (n: 3, age x : 13,00 ± 0,00 and sedentary counterparts (n: 13, age x :12,92 ± 0,75. The EUROFIT test battery was used to determine physical fitness. The test battery includes body height and weight measurements, touching the discs, flamingo balan ce, throwing health ball, vertical jumping, sit and reach, sit - up for 30 s, 20 meter sprint run, and 20 meter shuttle run tests. Data were analyzed by Mann Whitney U test. Significance was defined as p.05. In conclusion, children who do sports are more successful on most of the fitness parameters than sedentary children.

  19. Association between selected physical fitness parameters and esthetic competence in contemporary dancers.

    Science.gov (United States)

    Angioi, Manuela; Metsios, George S; Twitchett, Emily; Koutedakis, Yiannis; Wyon, Matthew

    2009-01-01

    The physical demands imposed on contemporary dancers by choreographers and performance schedules make their physical fitness just as important to them as skill development. Nevertheless, it remains to be confirmed which physical fitness components are associated with aesthetic competence. The aim of this study was to: 1. replicate and test a novel aesthetic competence tool for reliability, and 2. investigate the association between selected physical fitness components and aesthetic competence by using this new tool. Seventeen volunteers underwent a series of physical fitness tests (body composition, flexibility, muscular power and endurance, and aerobic capacity) and aesthetic competence assessments (seven individual criteria commonly used by selected dance companies). Inter-rater reliability of the aesthetic competence tool was very high (r = 0.96). There were significant correlations between the aesthetic competence score and jump ability and push-ups (r = 0.55 and r = 0.55, respectively). Stepwise backward multiple regression analysis revealed that the best predictor of aesthetic competence was push-ups (R(2) = 0.30, p = 0.03). Univariate analyses also revealed that the interaction of push-ups and jump ability improved the prediction power of aesthetic competence (R(2) = 0.44, p = 0.004). It is concluded that upper body muscular endurance and jump ability best predict aesthetic competence of the present sample of contemporary dancers. Further research is required to investigate the contribution of other components of aesthetic competence, including upper body strength, lower body muscular endurance, general coordination, and static and dynamic balance.

  20. An investigation on physical quality control parameters of dietary supplements tablets commercially available on the Kingdom of Saudi Arabia

    OpenAIRE

    H M Maswadeh; A N Al-Jarbou

    2011-01-01

    Summary: The goal of this study was to investigate the physical quality control parameters of dietary supplements tablets commercially available on the Kingdom of Saudi Arabia by using weight variation, friability and disintegration tests. The impact of immersion medium pH and the use of disk during disintegration test of dietary supplements as well as a price comparison with respect to quality were investigated. All products were found to fulfill the USP >2091< weight variation and >...

  1. Modeling and Extraction of Parameters Based on Physical Effects in Bipolar Transistors

    Directory of Open Access Journals (Sweden)

    Agnes Nagy

    2011-01-01

    Full Text Available The rising complexity of electronic systems, the reduction of components size, and the increment of working frequencies demand every time more accurate and stable integrated circuits, which require more precise simulation programs during the design process. PSPICE, widely used to simulate the general behavior of integrated circuits, does not consider many of the physical effects that can be found in real devices. Compact models, HICUM and MEXTRAM, have been developed over recent decades, in order to eliminate this deficiency. This paper presents some of the physical aspects that have not been studied so far, such as the expression of base-emitter voltage, including the emitter emission coefficient effect (n, physical explanation and simulation procedure, as well as a new extraction method for the diffusion potential VDE(T, based on the forward biased base-emitter capacitance, showing excellent agreement between experimental and theoretical results.

  2. Physical property parameter set for modeling ICPP aqueous wastes with ASPEN electrolyte NRTL model

    International Nuclear Information System (INIS)

    Schindler, R.E.

    1996-09-01

    The aqueous waste evaporators at the Idaho Chemical Processing Plant (ICPP) are being modeled using ASPEN software. The ASPEN software calculates chemical and vapor-liquid equilibria with activity coefficients calculated using the electrolyte Non-Random Two Liquid (NRTL) model for local excess Gibbs free energies of interactions between ions and molecules in solution. The use of the electrolyte NRTL model requires the determination of empirical parameters for the excess Gibbs free energies of the interactions between species in solution. This report covers the development of a set parameters, from literature data, for the use of the electrolyte NRTL model with the major solutes in the ICPP aqueous wastes

  3. Involvement of Physical Parameters in Medium Improvement for Tannase Production by Aspergillus niger FETL FT3 in Submerged Fermentation.

    Science.gov (United States)

    Darah, I; Sumathi, G; Jain, K; Hong, Lim Sheh

    2011-01-01

    Aspergillus niger FETL FT3, a local extracellular tannase producer strain that was isolated from one of dumping sites of tannin-rich barks of Rhizophora apiculata in Perak, Malaysia. This fungus was cultivated in 250 mL Erlenmeyer flask under submerged fermentation system. Various physical parameters were studied in order to maximize the tannase production. Maximal yield of tannase production, that is, 2.81 U per mL was obtained on the fourth day of cultivation when the submerged fermentation was carried out using liquid Czapek-Dox medium containing (percent; weight per volume) 0.25% NaNO(3), 0.1% KH(2)PO(4), 0.05% MgSO(4) ·7H(2)O, 0.05% KCl, and 1.0% tannic acid. The physical parameters used initial medium pH of 6.0, incubation temperature of 30°C, agitation speed of 200 rpm and inoculums size of 6 × 10(6) spores/ ml. This research has showed that physical parameters were influenced the tannase production by the fungus with 156.4 percent increment.

  4. SU-E-J-166: Sensitivity of Clinically Relevant Dosimetric Parameters to Contouring Uncertainty During Post Implant Dosimetry of Prostate Permanent Seed Implants

    Energy Technology Data Exchange (ETDEWEB)

    Mashouf, S [Sunnybrook Odette Cancer Centre, Toronto, ON (Canada); University of Toronto, Dept. of Radiation Oncology, Toronto, ON (Canada); Ravi, A; Morton, G; Song, W [Sunnybrook Odette Cancer Centre, Toronto, ON (Canada); University of Toronto, Dept. of Radiation Oncology, Toronto, ON (Canada); Sunnybrook Research Institute, Toronto, ON (Canada)

    2015-06-15

    Purpose: There is a strong evidence relating post-implant dosimetry for permanent seed prostate brachytherpy to local control rates. The delineation of the prostate on CT images, however, represents a challenge as it is difficult to confidently identify the prostate borders from soft tissue surrounding it. This study aims at quantifying the sensitivity of clinically relevant dosimetric parameters to prostate contouring uncertainty. Methods: The post-implant CT images and plans for a cohort of 43 patients, who have received I–125 permanent prostate seed implant in our centre, were exported to MIM Symphony LDR brachytherapy treatment planning system (MIM Software Inc., Cleveland, OH). The prostate contours in post-implant CT images were expanded/contracted uniformly for margins of ±1.00mm, ±2.00mm, ±3.00mm, ±4.00mm and ±5.00mm (±0.01mm). The values for V100 and D90 were extracted from Dose Volume Histograms for each contour and compared. Results: The mean value of V100 and D90 was obtained as 92.3±8.4% and 108.4±12.3% respectively (Rx=145Gy). V100 was reduced by −3.2±1.5%, −7.2±3.0%, −12.8±4.0%, −19.0±4.8%, − 25.5±5.4% for expanded contours of prostate with margins of +1mm, +2mm, +3mm, +4mm, and +5mm, respectively, while it was increased by 1.6±1.2%, 2.4±2.4%, 2.7±3.2%, 2.9±4.2%, 2.9±5.1% for the contracted contours. D90 was reduced by −6.9±3.5%, −14.5±6.1%, −23.8±7.1%, − 33.6±8.5%, −40.6±8.7% and increased by 4.1±2.6%, 6.1±5.0%, 7.2±5.7%, 8.1±7.3% and 8.1±7.3% for the same set of contours. Conclusion: Systematic expansion errors of more than 1mm may likely render a plan sub-optimal. Conversely contraction errors may Result in labeling a plan likely as optimal. The use of MRI images to contour the prostate should results in better delineation of prostate organ which increases the predictive value of post-op plans. Since observers tend to overestimate the prostate volume on CT, compared with MRI, the impact of the

  5. The Logical and Psychological Structure of Physical Chemistry and Its Relevance to the Organization/Sequencing of the Major Areas Covered in Physical Chemistry Textbooks

    Science.gov (United States)

    Tsaparlis, Georgios

    2014-01-01

    Jensen's scheme for the logical structure of chemistry is taken as reference to study the logical structure of physical chemistry. The scheme distinguishes three dimensions (composition and structure, energy, and time), with each dimension treated at one of the three levels (molar, molecular, and electrical). Such a structure places the outer…

  6. Correlation between the physical parameters of the i-nc-Si absorber layer grown by 27.12 MHz plasma with the nc-Si solar cell parameters

    Science.gov (United States)

    Das, Debajyoti; Mondal, Praloy

    2017-09-01

    Growth of highly conducting nanocrystalline silicon (nc-Si) thin films of optimum crystalline volume fraction, involving dominant crystallographic preferred orientation with simultaneous low fraction of microstructures at a low substrate temperature and high growth rate, is a challenging task for its promising utilization in nc-Si solar cells. Utilizing enhanced electron density and superior ion flux densities of the high frequency (∼27.12 MHz) SiH4 plasma, improved nc-Si films have been produced by simple optimization of H2-dilution, controlling the ion damage and enhancing supply of atomic-hydrogen onto the growing surface. Single junction nc-Si p-i-n solar cells have been prepared with i-nc-Si absorber layer and optimized. The physical parameters of the absorber layer have been systematically correlated to variations of the solar cell parameters. The preferred alignment of crystallites, its contribution to the low recombination losses for conduction of charge carriers along the vertical direction, its spectroscopic correlation with the dominant growth of ultra-nanocrystalline silicon (unc-Si) component and corresponding longer wavelength absorption, especially in the neighborhood of i/n-interface region recognize scientific and technological key issues that pave the ground for imminent advancement of multi-junction silicon solar cells.

  7. Effect of injection parameters on mechanical and physical properties of super ultra-thin wall propylene packaging by Taguchi method

    Science.gov (United States)

    Ginghtong, Thatchanok; Nakpathomkun, Natthapon; Pechyen, Chiravoot

    2018-06-01

    The parameters of the plastic injection molding process have been investigated for the manufacture of a 64 oz. ultra-thin polypropylene bucket. The 3 main parameters, such as injection speed, melting temperature, holding pressure, were investigated to study their effect on the physical appearance and compressive strength. The orthogonal array of Taguchi's L9 (33) was used to carry out the experimental plan. The physical properties were measured and the compressive strength was determined using linear regression analysis. The differential scanning calorimeter (DSC) was used to analyze the crystalline structure of the product. The optimization results show that the proposed approach can help engineers identify optimal process parameters and achieve competitive advantages of energy consumption and product quality. In addition, the injection molding of the product includes 24 mm of shot stroke, 1.47 mm position transfer, 268 rpm screw speed, injection speed 100 mm/s, 172 ton clamping force, 800 kgf holding pressure, 0.9 s holding time and 1.4 s cooling time, make the products in the shape and proportion of the product satisfactory. The parameters of influence are injection speed 71.07%, melting temperature 23.31% and holding pressure 5.62%, respectively. The compressive strength of the product was able to withstand a pressure of up to 839 N before the product became plastic. The low melting temperature was caused by the superior crystalline structure of the super-ultra-thin wall product which leads to a lower compressive strength.

  8. Application of probabilistic facies prediction and estimation of rock physics parameters in a carbonate reservoir from Iran

    International Nuclear Information System (INIS)

    Karimpouli, Sadegh; Hassani, Hossein; Nabi-Bidhendi, Majid; Khoshdel, Hossein; Malehmir, Alireza

    2013-01-01

    In this study, a carbonate field from Iran was studied. Estimation of rock properties such as porosity and permeability is much more challenging in carbonate rocks than sandstone rocks because of their strong heterogeneity. The frame flexibility factor (γ) is a rock physics parameter which is related not only to pore structure variation but also to solid/pore connectivity and rock texture in carbonate reservoirs. We used porosity, frame flexibility factor and bulk modulus of fluid as the proper parameters to study this gas carbonate reservoir. According to rock physics parameters, three facies were defined: favourable and unfavourable facies and then a transition facies located between these two end members. To capture both the inversion solution and associated uncertainty, a complete implementation of the Bayesian inversion of the facies from pre-stack seismic data was applied to well data and validated with data from another well. Finally, this method was applied on a 2D seismic section and, in addition to inversion of petrophysical parameters, the high probability distribution of favorable facies was also obtained. (paper)

  9. On the convergence of a fully discrete scheme of LES type to physically relevant solutions of the incompressible Navier-Stokes

    Science.gov (United States)

    Berselli, Luigi C.; Spirito, Stefano

    2018-06-01

    Obtaining reliable numerical simulations of turbulent fluids is a challenging problem in computational fluid mechanics. The large eddy simulation (LES) models are efficient tools to approximate turbulent fluids, and an important step in the validation of these models is the ability to reproduce relevant properties of the flow. In this paper, we consider a fully discrete approximation of the Navier-Stokes-Voigt model by an implicit Euler algorithm (with respect to the time variable) and a Fourier-Galerkin method (in the space variables). We prove the convergence to weak solutions of the incompressible Navier-Stokes equations satisfying the natural local entropy condition, hence selecting the so-called physically relevant solutions.

  10. A parameter optimization tool for evaluating the physical consistency of the plot-scale water budget of the integrated eco-hydrological model GEOtop in complex terrain

    Science.gov (United States)

    Bertoldi, Giacomo; Cordano, Emanuele; Brenner, Johannes; Senoner, Samuel; Della Chiesa, Stefano; Niedrist, Georg

    2017-04-01

    In mountain regions, the plot- and catchment-scale water and energy budgets are controlled by a complex interplay of different abiotic (i.e. topography, geology, climate) and biotic (i.e. vegetation, land management) controlling factors. When integrated, physically-based eco-hydrological models are used in mountain areas, there are a large number of parameters, topographic and boundary conditions that need to be chosen. However, data on soil and land-cover properties are relatively scarce and do not reflect the strong variability at the local scale. For this reason, tools for uncertainty quantification and optimal parameters identification are essential not only to improve model performances, but also to identify most relevant parameters to be measured in the field and to evaluate the impact of different assumptions for topographic and boundary conditions (surface, lateral and subsurface water and energy fluxes), which are usually unknown. In this contribution, we present the results of a sensitivity analysis exercise for a set of 20 experimental stations located in the Italian Alps, representative of different conditions in terms of topography (elevation, slope, aspect), land use (pastures, meadows, and apple orchards), soil type and groundwater influence. Besides micrometeorological parameters, each station provides soil water content at different depths, and in three stations (one for each land cover) eddy covariance fluxes. The aims of this work are: (I) To present an approach for improving calibration of plot-scale soil moisture and evapotranspiration (ET). (II) To identify the most sensitive parameters and relevant factors controlling temporal and spatial differences among sites. (III) Identify possible model structural deficiencies or uncertainties in boundary conditions. Simulations have been performed with the GEOtop 2.0 model, which is a physically-based, fully distributed integrated eco-hydrological model that has been specifically designed for mountain

  11. The influence of physical activity and fractures on ultrasound parameters in elderly people

    NARCIS (Netherlands)

    Graafmans, W.C.; Bouter, L.M.; Lips, P.T.A.M.

    1998-01-01

    In this cross-sectional study we investigated the relationship between ultrasound measurements in the calcaneus versus daily physical activity and fractures sustained in the past in elderly subjects. Ultrasound measurements were performed at both heels, which enabled us to examine determinants of

  12. A systematic review of web-based interventions for patient empowerment and physical activity in chronic diseases: relevance for cancer survivors.

    Science.gov (United States)

    Kuijpers, Wilma; Groen, Wim G; Aaronson, Neil K; van Harten, Wim H

    2013-02-20

    Patient empowerment reflects the ability of patients to positively influence their health and health behavior such as physical activity. While interactive Web-based interventions are increasingly used in various chronic disease settings to enhance empowerment and physical activity, such interventions are still uncommon for cancer survivors. The objective of this study was to systematically review the literature regarding interactive Web-based interventions. We focused on interventions aimed at increasing patient empowerment and physical activity for various chronic conditions, and explored their possible relevance for cancer survivors. Searches were performed in PubMed, Embase, and Scopus to identify peer-reviewed papers reporting on randomized controlled trials that studied the effects of Web-based interventions. These interventions were developed for adults with diabetes, cardiovascular disease, chronic obstructive pulmonary disease, heart failure, or cancer. Intervention characteristics, effects on patient empowerment and physical activity, information on barriers to and facilitators of intervention use, users' experiences, and methodological quality were assessed. Results were summarized in a qualitative way. We used the recommendations of the Institute of Medicine (IOM) regarding cancer survivorship care to explore the relevance of the interventions for cancer survivors. We included 19 papers reporting on trials with 18 unique studies. Significant, positive effects on patient empowerment were reported by 4 studies and 2 studies reported positive effects on physical activity. The remaining studies yielded mixed results or no significant group differences in these outcomes (ie, no change or improvement for all groups). Although the content, duration, and frequency of interventions varied considerably across studies, commonly used elements included education, self-monitoring, feedback/tailored information, self-management training, personal exercise program, and

  13. Physics

    CERN Document Server

    Cullen, Katherine

    2005-01-01

    Defined as the scientific study of matter and energy, physics explains how all matter behaves. Separated into modern and classical physics, the study attracts both experimental and theoretical physicists. From the discovery of the process of nuclear fission to an explanation of the nature of light, from the theory of special relativity to advancements made in particle physics, this volume profiles 10 pioneers who overcame tremendous odds to make significant breakthroughs in this heavily studied branch of science. Each chapter contains relevant information on the scientist''s childhood, research, discoveries, and lasting contributions to the field and concludes with a chronology and a list of print and Internet references specific to that individual.

  14. Detection of angiogenesis-dependent parameters by functional MRI: Correlation between histomorphology and evaluation of clinical relevance as prognostic factor for the example of cervical carcinoma

    International Nuclear Information System (INIS)

    Hawighorst, H.; Knopp, M.V.; Schoenberg, S.O.; Essig, M.; Kaick, G. van; Schaeffer, U.; Knapstein, P.G.; Weikel, W.

    1998-01-01

    Purpose: Purpose of this study is to compare functional MRI parameters with histomorphological markers of tumor microvessel density (MVD) and permeability (vascular endothelial growth factor) and to determine the ultimate value of both approaches by correlation with disease outcome in patients with primary cancer of the uterine cervix. Method: Pharmacokinetic parameters were calculated from contrast-enhanced dynamic MR imaging series in 37 patients with biopsy-proven primary cervical cancer. On the operative whole mount specimens, histomorphological markers of tumor angiogenesis (MVD, VEGF) were compared with the MRI-derived parameters. For MRI and histomorphological data, Kaplan-Meier survival curves were calculated and compared using logrank statistics. Results: Significant (p [de

  15. Global Social Challenges: insights from the physical sciences and their relevance to the evolution of social science

    CERN Multimedia

    CERN. Geneva

    2014-01-01

    The complex challenges confronting humanity today point to the need for new thinking and new theory in the social sciences which overcomes the limitations of compartmentalized, sectoral concepts, strategies and policies and mechanistic approaches to living social systems. The World Academy of Art & Science is convening a consortium of leading institutions and thinkers from different sectors to contribute ideas for formulation of a cohesive framework capable of addressing global social challenges in their totality and complex interrelationships. The objective of my presentation will be to explore the potential for collaboration between the physical and social sciences to arrive at a more cohesive and effective framework by exploring a series of questions, including - - Is an integrated science of society possible that transcends disciplinary boundaries based on common underlying principles as we find in the natural sciences? - To what extent can principles of natural science serve as valid models and a...

  16. PHYSICS

    CERN Multimedia

    D. Futyan

    A lot has transpired on the “Physics” front since the last CMS Bulletin. The summer was filled with preparations of new Monte Carlo samples based on CMSSW_3, the finalization of all the 10 TeV physics analyses [in total 50 analyses were approved] and the preparations for the Physics Week in Bologna. A couple weeks later, the “October Exercise” commenced and ran through an intense two-week period. The Physics Days in October were packed with a number of topics that are relevant to data taking, in a number of “mini-workshops”: the luminosity measurement, the determination of the beam spot and the measurement of the missing transverse energy (MET) were the three main topics.  Physics Week in Bologna The second physics week in 2009 took place in Bologna, Italy, on the week of Sep 7-11. The aim of the week was to review and establish how ready we are to do physics with the early collisions at the LHC. The agenda of the week was thus pac...

  17. PHYSICS

    CERN Multimedia

    D. Futyan

    A lot has transpired on the “Physics” front since the last CMS Bulletin. The summer was filled with preparations of new Monte Carlo samples based on CMSSW_3, the finalization of all the 10 TeV physics analyses [in total 50 analyses were approved] and the preparations for the Physics Week in Bologna. A couple weeks later, the “October Exercise” commenced and ran through an intense two-week period. The Physics Days in October were packed with a number of topics that are relevant to data taking, in a number of “mini-workshops”: the luminosity measurement, the determination of the beam spot and the measurement of the missing transverse energy (MET) were the three main topics.   Physics Week in Bologna The second physics week in 2009 took place in Bologna, Italy, on the week of Sep 7-11. The aim of the week was to review and establish (we hoped) the readiness of CMS to do physics with the early collisions at the LHC. The agenda of the...

  18. Correlation between free-volume parameters and physical properties of polyethylene-nitrile rubber blend

    Science.gov (United States)

    Gomaa, E.; Mostafa, N.; Mohsen, M.; Mohammed, M.

    2004-10-01

    Positron annihilation lifetime spectroscopy (PALS) was used to study the immiscibility of a polar nitrile rubber (NBR) that had been blended with pure and waste, low- and high-density polyethylene (PE). The effect of the weight percent of the rubber added to the PE was also investigated. It was found that a complicated variation (positive and negative) in both free-volume parameters (τ3 and I 3) from the values of the initial polymers forms an immiscible blend. These results are supported by a significant broadening in the free-volume hole size distributions. This has been interpreted in terms of interfacial spaces created between the boundaries of the two phases. Furthermore, a correlation was established between the free-volume parameters (τ3 and I 3) and the electrical and mechanical properties of the before mentioned polymer blends as a function of the weight percent of waste PE.

  19. Investigation of the physical parameters of duplex stainless steel (DSS surface integrity after turning

    Directory of Open Access Journals (Sweden)

    G. Krolczyk

    2015-01-01

    Full Text Available The article presents the influence of machining parameters on the microhardness of surface integrity (SI after turning by means of a coated sintered carbide wedge with a coating with ceramic intermediate layer. The investigation comprised the influence of cutting speed on the SI microhardness in dry machining. The material under investigation was duplex stainless steel with two-phase ferritic-austenitic structure. The results obtained allow for conclusions concerning the exploitation features of processed machine parts.

  20. Fast ADC interface with data reduction facilities for multi-parameter experiments in nuclear physics

    Energy Technology Data Exchange (ETDEWEB)

    Liebl, W; Franz, N; Ziegler, G [Technische Univ. Muenchen, Garching (Germany, F.R.). Fakultaet Physik; Hegewisch, S; Kunz, D; Maier, D; Lutter, R; Schoeffel, K; Stanzel, B [Muenchen Univ. (Germany, F.R.). Sektion Physik; Drescher, B [Hahn-Meitner-Institut fuer Kernforschung Berlin G.m.b.H. (Germany, F.R.)

    1982-03-01

    A modular ADC interface system for multi-parameter experiments with single NIM ADCs is described. 16 fast ADCs are handled by CAMAC modules and data buses in order to build up a sophisticated hardware system which is able to take coincidence data and singles spectra in parallel. The coincidence logic is handled by one of the interface modules; the interface allows online data reduction. The further expansion of the system will be discussed.

  1. APPRECIATION OF QUALITY FOR SOME TOMATOES VARIETIES BY USING THE DETERMINATION OF PHYSICAL-CHEMICAL PARAMETERS

    Directory of Open Access Journals (Sweden)

    Daniela Giosanu

    2016-12-01

    Full Text Available The studies were done on three varieties of tomatoes from Spain (red cherry, yellow cherry and kumato cherry. The following parameters: pH, soluble solids, content of water (moisture, content of minerals (ash, titratable acidity and content of some bioactive compounds (vitamin C, polyphenols, flavonoids, anthocyanins and carotenoids were determinate in order to appreciate the quality of these products. The results showed the influence of the varieties on the values of bioactive compounds with antioxidant activity.

  2. A fast ADC interface with data reduction facilities for multi-parameter experiments in nuclear physics

    International Nuclear Information System (INIS)

    Liebl, W.; Franz, N.; Ziegler, G.

    1982-01-01

    A modular ADC interface system for multi-parameter experiments with single NIM ADCs is described. 16 fast ADCs are handled by CAMAC modules and data buses in order to build up a sophisticated hardware system which is able to take coincidence data and singles spectra in parallel. The coincidence logic is handled by one of the interface modules; the interface allows online data reduction. The further expansion of the system will be discussed. (orig.)

  3. Hyper fast radiative transfer for the physical retrieval of surface parameters from SEVIRI observations

    International Nuclear Information System (INIS)

    Liuzzi, G; Masiello, G; Serio, C; Blasi, M G; Venafra, S

    2015-01-01

    This paper describes the theoretical aspects of a fast scheme for the physical retrieval of surface temperature and emissivity from SEVIRI data, their implementation and some sample results obtained. The scheme is based on a Kalman Filter approach, which effectively exploits the temporal continuity in the observations of the geostationary Meteosat Second Generation (MSG) platform, on which SEVIRI (Spinning Enhanced Visible and InfraRed Imager) operates. Such scheme embodies in its core a physical retrieval algorithm, which employs an hyper fast radiative transfer code highly customized for this retrieval task. Radiative transfer and its customizations are described in detail. Fastness, accuracy and stability of the code are fully documented for a variety of surface features, showing a peculiar application to the massive Greek forest fires in August 2007. (paper)

  4. EVALUATING THE CONTRIBUTION OF PHYSICAL PARAMETERS ON THE SAFETY OF UNSIGNALIZED INTERSECTIONS

    Directory of Open Access Journals (Sweden)

    A. AHMED

    2015-05-01

    Full Text Available Safety of any particular Road way facility cannot be attributed to set of parameters specific to a certain domain. Unsignalized intersections are no exceptions, thus, making them an important area of study. This paper presents the results of the analysis of four parameters, namely road width, traffic control, lane marking and landuse; and their sub-class on the safety of unsignalized intersections. The raw accident data was obtained from MIROS (Malaysian Institute of Road Safety Research. It was then reduced for descriptive analysis. Hypothesis testing was performed to assess the significance of all parameters and severity analysis was done to accomplish micro scale examination of each sub-class. The results show that landuse and lane marking are statistically significant. They are important variables to predict accidents whereas traffic control and road width are not significant. Intersections located in city with single line lane marking having no control and major road width greater than 9 meters were found to have the highest severity indices.

  5. A road map to solar neutrino fluxe, neutrino oscillation parameters, and tests for new physics

    CERN Document Server

    Bahcall, J N; Bahcall, John N.; Peña-Garay, Carlos

    2003-01-01

    We analyze all available solar and related reactor neutrino experiments, as well as simulated future ^7Be, p-p, pep, and ^8B solar neutrino experiments. We treat all solar neutrino fluxes as free parameters subject to the condition that the total luminosity represented by the neutrinos equals the observed solar luminosity (the `luminosity constraint'). Existing experiments show that the p-p solar neutrino flux is 1.01 + - 0.02 (1 sigma) times the flux predicted by the BP00 standard solar model; the ^7Be neutrino flux is 0.97^{+0.28}_{-0.54} the predicted flux; and the ^8B flux is 1.01 + - 0.06 the predicted flux. The oscillation parameters are: Delta m^2 = 7.3^{+0.4}_{-0.6} 10^{-5} eV^2 and tan^2 theta_{12} = 0.42^{+0.08}_{-0.06}. We evaluate how accurate future experiments must be to determine more precisely neutrino oscillation parameters and solar neutrino fluxes, and to elucidate the transition from vacuum-dominated to matter-dominated oscillations. A future ^7Be nu-e scattering experiment accurate to + -...

  6. Determination of the TLD-100 physical parameters; Determinacion de parametros fisicos del TLD-100

    Energy Technology Data Exchange (ETDEWEB)

    Paucar J, J.; Picon C, C. [Instituto Nacional de Enfermedades Neoplasicas. INEN. Av. Angamos Este 2520, Lima 34 (Peru)

    1998-12-31

    This study was realized in the Physics service at the Radiotherapy Department of the National Institute of Neoplasic Diseases in Lima, Peru, it was determined the activation energy, the kinetic order and the frequency factor of the fifth peak of the TLD-100 thermoluminescent spectra using different algorithms. This was carried out in parallel with the implementation and design of a software and an interface associated with the Tl lecturer which allows a semiautomatic control for a thermoluminescent lecturer process. (Author)

  7. Comparison of clinical and physics scoring of PET images when image reconstruction parameters are varied

    International Nuclear Information System (INIS)

    Walsh, C.; Johnston, C.; Sheehy, N.; Reilly, G. O.

    2013-01-01

    In this study the quantitative and qualitative image quality (IQ) measurements with clinical judgement of IQ in positron emission tomography (PET) were compared. The limitations of IQ metrics and the proposed criteria of acceptability for PET scanners are discussed. Phantom and patient images were reconstructed using seven different iterative reconstruction protocols. For each reconstructed set of images, IQ was scored based both on the visual analysis and on the quantitative metrics. The quantitative physics metrics did not rank the reconstruction protocols in the same order as the clinicians' scoring of perceived IQ (R s = -0.54). Better agreement was achieved when comparing the clinical perception of IQ to the physicist's visual assessment of IQ in the phantom images (R s = +0.59). The closest agreement was seen between the quantitative physics metrics and the measurement of the standard uptake values (SUVs) in small tumours (R s = +0.92). Given the disparity between the clinical perception of IQ and the physics metrics a cautious approach to use of IQ measurements for determining suspension levels is warranted. (authors)

  8. An intensive combined training program modulates physical, physiological, biomotoric, and technical parameters in women basketball players.

    Science.gov (United States)

    Kilinç, Fatih

    2008-11-01

    The purpose of this study was the investigation of the effects of an intensive combined training program based on the pretest scores of a university women's basketball team on their physical, physiological, biomotoric, and technical features. Twenty-four university volunteers were equally divided into two groups: an experiment group (intensive combined training group) and a control (technical training) group. The 10-week intensive combined training program was performed on the experiment group according to their pretest outcomes. Before and at the end of each period of training, which was scheduled four times a week, the physical, physiological, biomotoric, and technical performance of each subject were determined. With respect to the pre- and posttest measurements, the basketball group showed significant differences (p training program performed on university women basketball players had a significant effect on improving their physical, physiological, biomotoric, and technical features. It proved to be highly recommendable for female basketball players who are preparing for short-term tournaments; the basketball group in this study won a championship.

  9. On the Physical Relevance of the Study of gamma* gamma -> pi pi at small t and large Q2

    Energy Technology Data Exchange (ETDEWEB)

    Lansberg, J.P.; /SLAC; Pire, B.; /Ecole Polytechnique, CPHT; Szymanowski, L.; /Warsaw, Inst. Nucl. Studies

    2010-08-26

    We discuss the relevance of a dedicated measurement of exclusive production of a pair of neutral pions in a hard {gamma}*{gamma} scattering at small momentum transfer. In this case, the virtuality of one photon provides us with a hard scale in the process, enabling us to perform a QCD calculation of this reaction rate using the concept of Transition Distribution Amplitudes (TDA). Those are related by sum rules to the pion axial form factor F{sub A}{sup {pi}} and, as a direct consequence, a cross-section measurement of this process at intense beam electron-positron colliders such as CLEO, KEK-B and PEP-II, or Super-B would provide us with a unique measurement of the neutral pion axial form factor F{sub A}{sup {pi}0} at small scale. We believe that our models for the photon to meson transition distribution amplitudes are sufficiently constrained to give reasonable orders of magnitude for the estimated cross sections. Cross sections are large enough for quantitative studies to be performed at high luminosity e{sup +}e{sup -} colliders. After verifying the scaling and the {phi} independence of the cross section, one should be able to measure these new hadronic matrix elements, and thus open a new gate to the understanding of the hadronic structure. In particular, we argued here that the study of {gamma}*{gamma} {yields} {pi}{sup 0}{pi}{sup 0} in the TDA regime could provide with a unique experimental measurement of the {pi}{sup 0} axial form factor.

  10. Variation in soil physical, chemical and microbial parameters under different land uses in bagrot valley, gilgit, pakistan

    International Nuclear Information System (INIS)

    Ali, S.

    2017-01-01

    Soil degradation due to unsustainable land use is a global problem and the biggest challenge for sustainability in mountain areas due to their ecological and socio-economic impacts. The study aims to evaluate the variation in the physical, chemical and microbial parameters of soil across various land uses in the Bagrot valley, Central Karakoram National Park (CKNP), Gilgit-Baltistan. Soil samples from 0-20 cm were collected from three land uses such as arable land, pasture, and adjacently located forest. The variables investigated were soil bulk density, total porosity, saturation percentage, sand, silt, clay, pH, electric conductivity, CaCO/sub 3/, organic matter, TN, available P, K, Fe, Mn, Cu and Zn and microbial parameters (16SrRNA and ITS copies number and fungi-to-bacterial ratio). A sigificant varriation in all parameters were found accross the land uses (ANOVA, p < 0.01). Similarly, the highest bulk density, sand, pH, EC, CaCO/sub 3/ were found in arable land, with the lowest values in forest. In contrast, soil under forest showed a higher total porosity, percent saturation, clay, OM, macro and micronutrients, microbial abundance and fungi-to-bacterial ratio than for other land uses. The differences in soil parameters across the land uses indicated detrimental impacts of agricultural activities on soil health. Soil pH and organic matter are the main controlling factors for microbial indicators as well as physical and chemical parameters. The results suggest that restoration of natural vegetation in degraded land and decrease in intensity of land use could improve soil properties in the study area, as well as other similar mountainous regions. (author)

  11. Core and edge aspects of quiescent double barrier operation on DIII-D, with relevance to critical ITB physics issues

    International Nuclear Information System (INIS)

    Doyle, E.J.; Casper, T.A.; Burrell, K.H.

    2003-01-01

    Recent results from DIII-D address critical internal transport barrier (ITB) research issues relating to sustainability, impurity accumulation and ITB control, and have also demonstrated successful application of general profile control tools. In addition, substantial progress has been made in understanding the physics of the Quiescent Double Barrier (QDB) regime, increasing the demonstrated operating space for the regime and improving performance. Highlights include: (1) A clear demonstration of q-profile modification using electron cyclotron current drive (ECCD); (2) Successful use of localized profile control using electron cyclotron heating (ECH) or ECCD to reduce central high-Z impurity accumulation associated with density peaking; (3) Theory based modeling codes are now being used to design experiments; (4) The operating space for Quiescent H-mode (QH-mode) has been substantially broadened, in particular higher density operation has been achieved; (5) Both absolute (β≤ 3.8%, neutron rate S n ≤ 5.5x10 15 s -1 ) and relative (β N H 89 = 7 for 10τ E ) performance has been increased; (6) With regard to sustainment, QDB plasmas have been run for 3.8 s or 26 τ E . These results emphasize that it is possible to produce sustained high quality H-mode performance with an edge localized mode (ELM)-free edge, directly addressing a major issue in fusion research, of how to ameliorate or eliminate ELM induced pulsed divertor particle and heat loads. (author)

  12. Analysis of JSI TRIGA MARK II reactor physical parameters calculated with TRIPOLI and MCNP.

    Science.gov (United States)

    Henry, R; Tiselj, I; Snoj, L

    2015-03-01

    New computational model of the JSI TRIGA Mark II research reactor was built for TRIPOLI computer code and compared with existing MCNP code model. The same modelling assumptions were used in order to check the differences of the mathematical models of both Monte Carlo codes. Differences between the TRIPOLI and MCNP predictions of keff were up to 100pcm. Further validation was performed with analyses of the normalized reaction rates and computations of kinetic parameters for various core configurations. Copyright © 2014 Elsevier Ltd. All rights reserved.

  13. Monitoring and ming bio-physical parameters for hypoxia hazard in a coastal sand pit

    DEFF Research Database (Denmark)

    Mariani, Patrizio; Benassai, Guido; Grieco, Luisa

    2018-01-01

    Management of coastal areas requires monitoring and modeling of the anthropogenic drivers and the bio-physical processes affecting water quality. To assess the range of hydrographic conditions controlling oxygen distribution in the bottom layers of sand pits, a multi-year oceanographic survey has...... of the sand pits is associated with higher temperatures and wind speed lower than 5 m/s, which is not infrequent during the summer season. However, the number of consecutive days of oxygen depletion can be considered lower than the danger threshold level assumed in the literature....

  14. Application of radioactive methods for the measurement of physical parameters used in industrial nuclear plants

    International Nuclear Information System (INIS)

    Bignan, G.

    1989-01-01

    The thesis presents the development of non-destructive and non-intrusive assay using source of rays (neutrons or gammas) which is external to the system to characterize (activation methods). They are intended to measure physical values used in industrial nuclear plants (Fissile matter concentration, neutronic multiplicity, presence of heavy nuclei...). The presentation is as follows: - Theoretical study of the suggested methods and development of signal processing to ensure the representativeness of the measurement. - Experimental qualification. - Implantation of these techniques in an industrial context [fr

  15. Predicting the activity coefficients of free-solvent for concentrated globular protein solutions using independently determined physical parameters.

    Directory of Open Access Journals (Sweden)

    Devin W McBride

    Full Text Available The activity coefficient is largely considered an empirical parameter that was traditionally introduced to correct the non-ideality observed in thermodynamic systems such as osmotic pressure. Here, the activity coefficient of free-solvent is related to physically realistic parameters and a mathematical expression is developed to directly predict the activity coefficients of free-solvent, for aqueous protein solutions up to near-saturation concentrations. The model is based on the free-solvent model, which has previously been shown to provide excellent prediction of the osmotic pressure of concentrated and crowded globular proteins in aqueous solutions up to near-saturation concentrations. Thus, this model uses only the independently determined, physically realizable quantities: mole fraction, solvent accessible surface area, and ion binding, in its prediction. Predictions are presented for the activity coefficients of free-solvent for near-saturated protein solutions containing either bovine serum albumin or hemoglobin. As a verification step, the predictability of the model for the activity coefficient of sucrose solutions was evaluated. The predicted activity coefficients of free-solvent are compared to the calculated activity coefficients of free-solvent based on osmotic pressure data. It is observed that the predicted activity coefficients are increasingly dependent on the solute-solvent parameters as the protein concentration increases to near-saturation concentrations.

  16. Effect of basic physical parameters to control plasma meniscus and beam halo formation in negative ion sources

    Energy Technology Data Exchange (ETDEWEB)

    Miyamoto, K. [Naruto University of Education, 748 Nakashima, Takashima, Naruto-cho, Naruto-shi, Tokushima 772-8502 (Japan); Okuda, S.; Nishioka, S.; Hatayama, A. [Faculty of Science and Technology, Keio University, 3-14-1 Hiyoshi, Kohoku-ku, Yokohama 223-8522 (Japan)

    2013-09-14

    Our previous study shows that the curvature of the plasma meniscus causes the beam halo in the negative ion sources: the negative ions extracted from the periphery of the meniscus are over-focused in the extractor due to the electrostatic lens effect, and consequently become the beam halo. In this article, the detail physics of the plasma meniscus and beam halo formation is investigated with two-dimensional particle-in-cell simulation. It is shown that the basic physical parameters such as the H{sup −} extraction voltage and the effective electron confinement time significantly affect the formation of the plasma meniscus and the resultant beam halo since the penetration of electric field for negative ion extraction depends on these physical parameters. Especially, the electron confinement time depends on the characteristic time of electron escape along the magnetic field as well as the characteristic time of electron diffusion across the magnetic field. The plasma meniscus penetrates deeply into the source plasma region when the effective electron confinement time is short. In this case, the curvature of the plasma meniscus becomes large, and consequently the fraction of the beam halo increases.

  17. Effect of basic physical parameters to control plasma meniscus and beam halo formation in negative ion sources

    International Nuclear Information System (INIS)

    Miyamoto, K.; Okuda, S.; Nishioka, S.; Hatayama, A.

    2013-01-01

    Our previous study shows that the curvature of the plasma meniscus causes the beam halo in the negative ion sources: the negative ions extracted from the periphery of the meniscus are over-focused in the extractor due to the electrostatic lens effect, and consequently become the beam halo. In this article, the detail physics of the plasma meniscus and beam halo formation is investigated with two-dimensional particle-in-cell simulation. It is shown that the basic physical parameters such as the H − extraction voltage and the effective electron confinement time significantly affect the formation of the plasma meniscus and the resultant beam halo since the penetration of electric field for negative ion extraction depends on these physical parameters. Especially, the electron confinement time depends on the characteristic time of electron escape along the magnetic field as well as the characteristic time of electron diffusion across the magnetic field. The plasma meniscus penetrates deeply into the source plasma region when the effective electron confinement time is short. In this case, the curvature of the plasma meniscus becomes large, and consequently the fraction of the beam halo increases

  18. Long-term effects of deep soil loosening on root distribution and soil physical parameters in compacted lignite mine soils

    Science.gov (United States)

    Badorreck, Annika; Krümmelbein, Julia; Raab, Thomas

    2015-04-01

    Soil compaction is a major problem of soils on dumped mining substrates in Lusatia, Germany. Deep ripping and cultivation of deep rooting plant species are considered to be effective ways of agricultural recultivation. Six years after experiment start, we studied the effect of initial deep soil loosening (i.e. down to 65 cm) on root systems of rye (Secale cereale) and alfalfa (Medicago sativa) and on soil physical parameters. We conducted a soil monolith sampling for each treatment (deep loosened and unloosened) and for each plant species (in three replicates, respectively) to determine root diameter, length density and dry mass as well as soil bulk density. Further soil physical analysis comprised water retention, hydraulic conductivity and texture in three depths. The results showed different reactions of the root systems of rye and alfalfa six years after deep ripping. In the loosened soil the root biomass of the rye was lower in depths of 20-40 cm and the root biomass of alfalfa was also decreased in depths of 20-50 cm together with a lower root diameter for both plant species. Moreover, total and fine root length density was higher for alfalfa and vice versa for rye. The soil physical parameters such as bulk density showed fewer differences, despite a higher bulk density in 30-40cm for the deep loosened rye plot which indicates a more pronounced plough pan.

  19. Wire Array Z-pinches on Sphinx Machine: Experimental Results and Relevant Points of Microsecond Implosion Physics

    Science.gov (United States)

    Calamy, H.; Hamann, F.; Lassalle, F.; Bayol, F.; Mangeant, C.; Morell, A.; Huet, D.; Bedoch, J. P.; Chittenden, J. P.; Lebedev, S. V.; Jennings, C. A.; Bland, S. N.

    2006-01-01

    Centre d'Etudes de Gramat (France) has developed an efficient long implosion time (800 ns) Aluminum plasma radiation source (PRS). Based on the LTD technology, the SPHINX facility is developed as a 1-3MJ, 1μs rise time, 4-10 MA current driver. In this paper, it was used in 1MJ, 4MA configuration to drive Aluminum nested wire arrays Z-pinches with K-shell yield up to 20 kJ and a FWHM of the x-ray pulse of about 50 ns. We present latest SPHINX experiments and some of the main physic issues of the microsecond regime. Experimental setup and results are described with the aim of giving trends that have been obtained. The main features of microsecond implosion of wire arrays can be analyzed thanks to same methods and theories as used for faster Z-pinches. The effect of load polarity was examined. The stability of the implosion , one of the critical point of microsecond wire arrays due to the load dimensions imposed by the time scale, is tackled. A simple scaling from 100 ns Z-pinch results to 800 ns ones gives good results and the use of nested arrays improves dramatically the implosion quality and the Kshell yield of the load. However, additional effects such as the impact of the return current can geometry on the implosion have to be taken into account on our loads. Axial inhomogeneity of the implosion the origin of which is not yet well understood occurs in some shots and impacts the radiation output. The shape of the radiative pulse is discussed and compared with the homogeneity of the implosion. Numerical 2D R-Z and R-θ simulations are used to highlight some experimental results and understand the plasma conditions during these microsecond wire arrays implosions.

  20. Wire Array Z-pinches on Sphinx Machine: Experimental Results and Relevant Points of Microsecond Implosion Physics

    International Nuclear Information System (INIS)

    Calamy, H.; Hamann, F.; Lassalle, F.; Bayol, F.; Mangeant, C.; Morell, A.; Huet, D.; Bedoch, J.P.; Chittenden, J.P.; Lebedev, S.V.; Jennings, C.A.; Bland, S.N.

    2006-01-01

    Centre d'Etudes de Gramat (France) has developed an efficient long implosion time (800 ns) Aluminum plasma radiation source (PRS). Based on the LTD technology, the SPHINX facility is developed as a 1-3MJ, 1μs rise time, 4-10 MA current driver. In this paper, it was used in 1MJ, 4MA configuration to drive Aluminum nested wire arrays Z-pinches with K-shell yield up to 20 kJ and a FWHM of the x-ray pulse of about 50 ns. We present latest SPHINX experiments and some of the main physic issues of the microsecond regime. Experimental setup and results are described with the aim of giving trends that have been obtained. The main features of microsecond implosion of wire arrays can be analyzed thanks to same methods and theories as used for faster Z-pinches. The effect of load polarity was examined. The stability of the implosion , one of the critical point of microsecond wire arrays due to the load dimensions imposed by the time scale, is tackled. A simple scaling from 100 ns Z-pinch results to 800 ns ones gives good results and the use of nested arrays improves dramatically the implosion quality and the Kshell yield of the load. However, additional effects such as the impact of the return current can geometry on the implosion have to be taken into account on our loads. Axial inhomogeneity of the implosion the origin of which is not yet well understood occurs in some shots and impacts the radiation output. The shape of the radiative pulse is discussed and compared with the homogeneity of the implosion. Numerical 2D R-Z and R-θ simulations are used to highlight some experimental results and understand the plasma conditions during these microsecond wire arrays implosions

  1. Physical and chemical parameters affecting transport of 137Cs in arid watersheds

    International Nuclear Information System (INIS)

    McHenry, J.R.; Ritchie, J.C.

    1977-01-01

    The occurrence and amount of fallout 137 Cs were determined in 12 watersheds in the arid southwestern United States. The factors believed to influence the distribution of 137 Cs in the watershed soils and in the reservoir sediments were investigated by using stepwise regression techniques. Seventeen parameters, in the case of soils, and 21 parameters, in the case of sediments, were used in the study. Ninety percent of the variation in the 137 Cs content of soils, per unit weight, could be predicted in terms of the percentage of soil nitrogen, the R factor (rainfall intensity) of the universal soil loss equation, the percentage of sand in the soils, and the soil cation exchange capacity. Also, 90% of the variation in the content of 137 Cs in the watershed soils, per unit area, could be predicted in terms of the fallout intensity, the percentages of silt and clay, and the cation exchange capacity. For reservoir sediments the equivalent predictors of 137 Cs accumulation in the sediment profile, per unit weight, were the soil cation exchange capacity, the January-March average precipitation, and the soil contents of total P and N. The distribution of 137 Cs in sediments per unit area was similarly predicted by watershed area, percentage of total soil C, reservoir surface area, areal concentration of 137 Cs in the watershed soils, and soil organic matter

  2. Analysis of swimming performance from physical, physiological, and biomechanical parameters in young swimmers.

    Science.gov (United States)

    Jürimäe, Jaak; Haljaste, Kaja; Cicchella, Antonio; Lätt, Evelin; Purge, Priit; Leppik, Aire; Jürimäe, Toivo

    2007-02-01

    The purpose of this study was to examine the influence of the energy cost of swimming, body composition, and technical parameters on swimming performance in young swimmers. Twenty-nine swimmers, 15 prepubertal (11.9 +/- 0.3 years; Tanner Stages 1-2) and 14 pubertal (14.3 +/- 1.4 years; Tanner Stages 3-4) boys participated in the study. The energy cost of swimming (Cs) and stroking parameters were assessed over maximal 400-m front-crawl swimming in a 25-m swimming pool. The backward extrapolation technique was used to evaluate peak oxygen consumption (VO2peak). A stroke index (SI; m2 . s(-1) . cycles(-1)) was calculated by multiplying the swimming speed by the stroke length. VO2peak results were compared with VO2peak test in the laboratory (bicycle, 2.86 +/- 0.74 L/min, vs. in water, 2.53 +/- 0.50 L/min; R2 = .713; p = .0001). Stepwise-regression analyses revealed that SI (R2 = .898), in-water VO2peak (R2 = .358), and arm span (R2 = .454) were the best predictors of swimming performance. The backward-extrapolation method could be used to assess VO2peak in young swimmers. SI, arm span, and VO2peak appear to be the major determinants of front-crawl swimming performance in young swimmers.

  3. Monitoring soil chemical and physical parameters under Douglas fir in the Netherlands

    Energy Technology Data Exchange (ETDEWEB)

    Konsten, C.J.M.; Tiktak, A.; Bouten, W.

    1987-01-01

    In march 1987 a monitoring program started in two Douglas fir stands of different vitality in the Netherlands. Aim of the study is to provide insight in the chemical and physical rooting conditions of the vegetation and to quantify the contributions of atmospheric deposition to soil acidification. The hydrological part of the monitoring progam consists of automated measurements of precipitation, throughfall, soil water pressure head and soil water content; in addition soil water content is determined by neutron sonde measurements and gravimetry. These data are used as input data for simulation models which calculate water fluxes through the vegetation and soil. For the soil chemical part of the program precipitation (bulk and wet-only), throughfall and litter fall are sampled. The soil solution is sampled by suction from porous cups and from porous plates by a new, continous technique. Combination of soil chemical and soil physical data will result in chemical fluxes through the vegetation and through various soil compartments. Element budgets for the ecosystem will also be calculated. The program forms part of an interdisciplinary monitoring project within the Dutch Priority Programme on Acidification. 2 figs., 1 tab., 19 refs.

  4. Synopses/physical significance of complex-valued catalyst parameters in heterogeneous catalysis

    Energy Technology Data Exchange (ETDEWEB)

    Hesse, D

    1979-08-01

    An independent parameter was used to describe the local values of the interdependent thermodynamic variables of the coupled effects of transfer, sorption, and surface reaction at steady state in a packed bed of porous catalyst. A system reduction yielded a generalized concept of the pore effectiveness factor, H, which was unity or a real or imaginary complex number when the coupled diffusion and reaction processes do not affect, inhibit, or enhance conversion, respectively. These concepts are illustrated by ethylene hydrogenation on platinum, a process in which ethylene adsorbs much more strongly than hydrogen, but diffuses more slowly; as the rate is proportional to the product of hydrogen and ethylene surface coverage and the more strongly adsorbed ethylene occupies the majority of the available sites, a decrease in gas-phase ethylene concentration would increase the conversion rate. The reaction rate also increases with decreasing distance from the catalyst particle core.

  5. Effect of physical and chemical mutagens on morphological parameters in garlic

    International Nuclear Information System (INIS)

    Choudhary, A.D.; Dnyansagar, V.R.

    1980-01-01

    Cloves of garlic (Allium sativum Linn.) were treated with various doses of gamma rays and different concentrations of ethylmethane sulphonate, diethyl sulphate and ethyleneimine. The effect of mutagens was studied in respect of morphological parameters such as sprouting, survival, sprout height, plant height, number and size of leaves, number of cloves and weight of bulb. In case of mutagen treatment the percentage of sprouting and survival as well as sprout height were found to be decreased with an increase in the dose/concentration of the mutagen. The effect of mutagen on leaf size and number was inhibitory. However, the number of cloves and weight of bulb were found to be increased at lower dose concentration of mutagens. (author)

  6. Evaluation of physical, chemical and irradiation parameters on crab shell's chitosan obtention process

    Energy Technology Data Exchange (ETDEWEB)

    Ferreira, Maiara S.; Moura, Eduardo de; Geraldo, Aurea B.C., E-mail: maiaraferreira@usp.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

    2015-07-01

    Chitin it is found in exoskeletons of crustaceans and in the cellular wall of fungi. Chitosan is obtained through the stages of deproteinization, demineralization and deacetylation. Specially, crab shells present in their composition 15-20% of chitin, 25-40% of proteins and 40-55% calcium carbonate. The demineralization step aims to reduce the inorganic ions content and is realized under hydrochloric acid dissolution. The deproteinization has the function of reducing the proteins and aminoacids by sodium hydroxide solution added to the raw material. In this work, the experimental design used to determine the best steps conditions for the production of final product - chitosan from chitin of crab shells - had been time (10, 30, 60 and 120 minutes), concentration, relation reagent solution/raw material quantity and irradiation parameters (radiation font, dose and dose rate). The results are discussed in terms of total inorganic materials and proteins quantification and of thermal analysis. (author)

  7. Chemical and physical parameters affecting the performance of the Os-191/Ir-191m generator

    International Nuclear Information System (INIS)

    Packard, A.B.; Butler, T.A.; Knapp, F.F.; O'Brien, G.M.; Treves, S.

    1984-01-01

    The development of an Os-191/Ir-191m generator suitable for radionuclide angiography in humans has elicited much interest. This generator employs ''(OsO 2 Cl 4 ) 2- '' on AG MP-1 anion exchange resin with a Dowex-2 scavenger column and is eluted with normal saline at pH 1. The parent Os species is, however, neither welldefined nor homogeneous leading to less than optimal breakthrough of Os-191 (5 x 10 -3 %) and modest Ir-191m yield (10-15%). The effect of a range of parameters on generator performance has been evaluated as has been the way in which the assembly and loading process affects generator performance. In addition, a number of potential alternative generator systems have been evaluated

  8. Evaluation of physical, chemical and irradiation parameters on crab shell's chitosan obtention process

    International Nuclear Information System (INIS)

    Ferreira, Maiara S.; Moura, Eduardo de; Geraldo, Aurea B.C.

    2015-01-01

    Chitin it is found in exoskeletons of crustaceans and in the cellular wall of fungi. Chitosan is obtained through the stages of deproteinization, demineralization and deacetylation. Specially, crab shells present in their composition 15-20% of chitin, 25-40% of proteins and 40-55% calcium carbonate. The demineralization step aims to reduce the inorganic ions content and is realized under hydrochloric acid dissolution. The deproteinization has the function of reducing the proteins and aminoacids by sodium hydroxide solution added to the raw material. In this work, the experimental design used to determine the best steps conditions for the production of final product - chitosan from chitin of crab shells - had been time (10, 30, 60 and 120 minutes), concentration, relation reagent solution/raw material quantity and irradiation parameters (radiation font, dose and dose rate). The results are discussed in terms of total inorganic materials and proteins quantification and of thermal analysis. (author)

  9. Blood parameters in draught oxen during work: relationship to physical fitness.

    Science.gov (United States)

    Zanzinger, J; Becker, K

    1992-08-01

    1. Four Zebu and four Simmental oxen were submitted to moderate and exhaustive work. Venous blood samples were taken before, immediately after and 30 min after work and assayed for several blood parameters. 2. Draught work led to a decrease in carbon dioxide (pvCO2) and increases in pH, oxygen (pvO2), triglycerides, free fatty acids (FFA) and lactate. 3. Zebu oxen had higher pvCO2 and FFA and lower pH, pvO2 and lactate in response to exercise. 4. Ratios of individual draught power output and values of pvO2 and lactate after work enable the identification of fit and/or weak individuals.

  10. Physics parameter calculations for a Tandem Mirror Reactor with thermal barriers

    International Nuclear Information System (INIS)

    Boghosian, B.M.; Lappa, D.A.; Logan, B.G.

    1979-01-01

    Thermal barriers are localized reductions in potential between the plugs and the central cell, which effectively insulate trapped plug electrons from the central cell electrons. By then applying electron heating in the plug, it is possible to obtain trapped electron temperatures that are much greater than those of the central cell electrons. This, in turn, effects an increase in the plug potential and central cell confinement with a concomitant decrease in plug density and injection power. Ions trapped in the barrier by collisions are removed by the injection of neutral beams directed inside the barrier cell loss cone; these beam neutrals convert trapped barrier ions to neutrals by charge exchange permitting their escape. We describe a zero-dimensional physics model for this type of reactor, and present some preliminary results for Q

  11. Effect of cement dust pollution on certain physical parameters of maize crop and soils

    Energy Technology Data Exchange (ETDEWEB)

    Parthasarathy, S; Arunachalam, N; Natarajan, K; Oblisami, G; Rangaswami, G

    1975-04-01

    A study was undertaken in the fields near a cement factory where the cement dust is the prime pollutant to the field crops and soils. Cement dust deposit varied with the distance from the kiln and fourth and fifth leaves of maize had comparatively more dust than the first three leaves from the top. The cement dust deposited plants showed a suppression in most of the characters like leaf size, number and size of cobs and plant height when compared to plants in non-polluted fields. On comparison with the physical characters of the soils from the control field the soil from cement dust polluted field showed a decrease in water holding capacity and pore space while thermal conductivity and specific heat were more. Artificial mixtures of red and black soils with cement dust showed similar trend as those of the field sample, the black soil being affected more seriously than the red soil.

  12. Empirical correlation between mechanical and physical parameters of irradiated pressure vessel steels

    International Nuclear Information System (INIS)

    Tipping, P.; Solt, G.; Waeber, W.

    1991-02-01

    Neutron irradiation embrittlement of nuclear reactor pressure vessel (PV) steels is one of the best known ageing factors of nuclear power plants. If the safety limits set by the regulators for the PV steel are not satisfied any more, and other measures are too expensive for the economics of the plant, this embrittlement could lead to the closure of the plant. Despite this, the fundamental mechanisms of neutron embrittlement are not yet fully understood, and usually only empirical mathematical models exist to asses neutron fluence effects on embrittlement, as given by the Charpy test for example. In this report, results of a systematic study of a French forging (1.2 MD 07 B), irradiated to several fluences will be reported. Mechanical property measurements (Charpy tensile and Vickers microhardness), and physical property measurements (small angle neutron scattering - SANS), have been done on specimens having the same irradiation or irradiation-annealing-reirradiation treatment histories. Empirical correlations have been established between the temperature shift and the decrease in the upper shelf energy as measured on Charpy specimens and tensile stresses and hardness increases on the one hand, and the size of the copper-rich precipitates formed by the irradiation on the other hand. The effect of copper (as an impurity element) in enhancing the degradation of mechanical properties has been demonstrated; the SANS measurements have shown that the size and amount of precipitates are important. The correlations represent the first step in an effort to develop a description of neutron irradiation induced embrittlement which is based on physical models. (author) 6 figs., 27 refs

  13. A study of effects of scattered reaction on physical parameters of a new gamma camera used in nuclear medicine

    International Nuclear Information System (INIS)

    Maury, Martine.

    1979-01-01

    This work is devoted to the analysis of the performance of a new gamma camera. This camera is characterized by the introduction of an image amplifier between the crystal detector and the localization system which compound four photomultipliers. The appreciation of performances of this new instrument is based on the measure of the physical parameters usually studied in this purpose: energy resolution, spatial resolution, modulation transfert fonction and contrast, sensitivity and deadtime. Furthermore, we have studied the influence of scattered radiation on the value of these parameters. Two studies complete this work: the artificial deterioration of the energy resolution of the camera inserting a noise, to estimate the importance of the energy resolution on the image contrast; the scanning of pulse amplitude spectra obtained from brain of patients in order to evaluate the participation of scattered radiation in the peak's constitution. We present, at last, a quality control programm for scintillation camera [fr

  14. Comparative Mapping of Soil Physical-Chemical and Structural Parameters at Field Scale to Identify Zones of Enhanced Leaching Risk

    DEFF Research Database (Denmark)

    Nørgaard, Trine; Møldrup, Per; Olsen, Preben

    2013-01-01

    Preferential flow and particle-facilitated transport through macropores contributes significantly to the transport of strongly sorbing substances such as pesticides and phosphorus. The aim of this study was to perform a field-scale characterization of basic soil physical properties like clay...... and organic carbon content and investigate whether it was possible to relate these to derived structural parameters such as bulk density and conservative tracer parameters and to actual particle and phosphorus leaching patterns obtained from laboratory leaching experiments. Sixty-five cylindrical soil columns...... of 20 cm height and 20 cm diameter and bulk soil were sampled from the topsoil in a 15 m  15 m grid in an agricultural loamy field. Highest clay contents and highest bulk densities were found in the northern part of the field. Leaching experiments with a conservative tracer showed fast 5% tracer...

  15. Using Perturbed Physics Ensembles and Machine Learning to Select Parameters for Reducing Regional Biases in a Global Climate Model

    Science.gov (United States)

    Li, S.; Rupp, D. E.; Hawkins, L.; Mote, P.; McNeall, D. J.; Sarah, S.; Wallom, D.; Betts, R. A.

    2017-12-01

    This study investigates the potential to reduce known summer hot/dry biases over Pacific Northwest in the UK Met Office's atmospheric model (HadAM3P) by simultaneously varying multiple model parameters. The bias-reduction process is done through a series of steps: 1) Generation of perturbed physics ensemble (PPE) through the volunteer computing network weather@home; 2) Using machine learning to train "cheap" and fast statistical emulators of climate model, to rule out regions of parameter spaces that lead to model variants that do not satisfy observational constraints, where the observational constraints (e.g., top-of-atmosphere energy flux, magnitude of annual temperature cycle, summer/winter temperature and precipitation) are introduced sequentially; 3) Designing a new PPE by "pre-filtering" using the emulator results. Steps 1) through 3) are repeated until results are considered to be satisfactory (3 times in our case). The process includes a sensitivity analysis to find dominant parameters for various model output metrics, which reduces the number of parameters to be perturbed with each new PPE. Relative to observational uncertainty, we achieve regional improvements without introducing large biases in other parts of the globe. Our results illustrate the potential of using machine learning to train cheap and fast statistical emulators of climate model, in combination with PPEs in systematic model improvement.

  16. Effect of Physical and Chemical Operating Parameters on Anaerobic Digestion of Manure and Biogas Production: A Review

    Directory of Open Access Journals (Sweden)

    Saeed Samani Majd

    2017-03-01

    Conclusion: High COD removal decrease of VS were achieved in the range of 80-95 % and 65- 92 % respectively in bioreactors. The produced methane was also 48 mmol L-1 to 4681.3 m3 per month for reactors with a volume of 120 ml to 1330 m3 achieved respectively at 37 and 55˚C from the Mesophilic and thermophilic temperatures. Results summarized on the physical and chemical conditions in this paper, can be used to study the effective parameters and optimize conditions used in biogas production.

  17. Involvement of Physical Parameters in Medium Improvement for Tannase Production by Aspergillus niger FETL FT3 in Submerged Fermentation

    OpenAIRE

    Darah, I.; Sumathi, G.; Jain, K.; Hong, Lim Sheh

    2011-01-01

    Aspergillus niger FETL FT3, a local extracellular tannase producer strain that was isolated from one of dumping sites of tannin-rich barks of Rhizophora apiculata in Perak, Malaysia. This fungus was cultivated in 250 mL Erlenmeyer flask under submerged fermentation system. Various physical parameters were studied in order to maximize the tannase production. Maximal yield of tannase production, that is, 2.81 U per mL was obtained on the fourth day of cultivation when the submerged fermentation...

  18. LMJ target implosions: sensitivity of the acceptable gain to physical parameters and simplification of the radiative transport model

    International Nuclear Information System (INIS)

    Charpin, C.; Bonnefille, M.; Charrier, A.; Giorla, J.; Holstein, P.A.; Malinie, G.

    2000-01-01

    Our study is in line with the robustness of the LMJ target and the definition of safety margins. It is based on the determination of the 'acceptable gain', defined as 75% of the nominal gain. We have tested the sensitivity of the gain to physical and numerical parameters in the case of deteriorated implosions, i.e. when implosion conditions are not optimized. Moreover, we have simplified the radiative transport model, which enabled us to save a lot of computing time. All our calculations were done with the Lagrangian code FCI2 in a very simplified configuration. (authors)

  19. Developing a computational tool for predicting physical parameters of a typical VVER-1000 core based on artificial neural network

    International Nuclear Information System (INIS)

    Mirvakili, S.M.; Faghihi, F.; Khalafi, H.

    2012-01-01

    Highlights: ► Thermal–hydraulics parameters of a VVER-1000 core based on neural network (ANN), are carried out. ► Required data for ANN training are found based on modified COBRA-EN code and then linked each other using MATLAB software. ► Based on ANN method, average and maximum temperature of fuel and clad as well as MDNBR of each FA are predicted. -- Abstract: The main goal of the present article is to design a computational tool to predict physical parameters of the VVER-1000 nuclear reactor core based on artificial neural network (ANN), taking into account a detailed physical model of the fuel rods and coolant channels in a fuel assembly. Predictions of thermal characteristics of fuel, clad and coolant are performed using cascade feed forward ANN based on linear fission power distribution and power peaking factors of FAs and hot channels factors (which are found based on our previous neutronic calculations). A software package has been developed to prepare the required data for ANN training which applies a modified COBRA-EN code for sub-channel analysis and links the codes using the MATLAB software. Based on the current estimation system, five main core TH parameters are predicted, which include the average and maximum temperatures of fuel and clad as well as the minimum departure from nucleate boiling ratio (MDNBR) for each FA. To get the best conditions for the considered ANNs training, a comprehensive sensitivity study has been performed to examine the effects of variation of hidden neurons, hidden layers, transfer functions, and the learning algorithms on the training and simulation results. Performance evaluation results show that the developed ANN can be trained to estimate the core TH parameters of a typical VVER-1000 reactor quickly without loss of accuracy.

  20. Studies of the Impact of Magnetic Field Uncertainties on Physics Parameters of the Mu2e Experiment

    Energy Technology Data Exchange (ETDEWEB)

    Bradascio, Federica [Pisa U.

    2016-01-01

    The Mu2e experiment at Fermilab will search for a signature of charged lepton flavor violation, an effect prohibitively too small to be observed within the Standard Model of particle physics. Therefore, its observation is a signal of new physics. The signature that Mu2e will search for is the ratio of the rate of neutrinoless coherent conversion of muons into electrons in the field of a nucleus, relative to the muon capture rate by the nucleus. The conversion process is an example of charged lepton flavor violation. This experiment aims at a sensitivity of four orders of magnitude higher than previous related experiments. The desired sensitivity implies highly demanding requirements of accuracy in the design and conduct of the experiment. It is therefore important to investigate the tolerance of the experiment to instrumental uncertainties and provide specifications that the design and construction must meet. This is the core of the work reported in this thesis. The design of the experiment is based on three superconducting solenoid magnets. The most important uncertainties in the magnetic field of the solenoids can arise from misalignments of the Transport Solenoid, which transfers the beam from the muon production area to the detector area and eliminates beam-originating backgrounds. In this thesis, the field uncertainties induced by possible misalignments and their impact on the physics parameters of the experiment are examined. The physics parameters include the muon and pion stopping rates and the scattering of beam electrons off the capture target, which determine the signal, intrinsic background and late-arriving background yields, respectively. Additionally, a possible test of the Transport Solenoid alignment with low momentum electrons is examined, as an alternative option to measure its field with conventional probes, which is technically difficult due to mechanical interference. Misalignments of the Transport Solenoid were simulated using standard

  1. A Bayesian and Physics-Based Ground Motion Parameters Map Generation System

    Science.gov (United States)

    Ramirez-Guzman, L.; Quiroz, A.; Sandoval, H.; Perez-Yanez, C.; Ruiz, A. L.; Delgado, R.; Macias, M. A.; Alcántara, L.

    2014-12-01

    We present the Ground Motion Parameters Map Generation (GMPMG) system developed by the Institute of Engineering at the National Autonomous University of Mexico (UNAM). The system delivers estimates of information associated with the social impact of earthquakes, engineering ground motion parameters (gmp), and macroseismic intensity maps. The gmp calculated are peak ground acceleration and velocity (pga and pgv) and response spectral acceleration (SA). The GMPMG relies on real-time data received from strong ground motion stations belonging to UNAM's networks throughout Mexico. Data are gathered via satellite and internet service providers, and managed with the data acquisition software Earthworm. The system is self-contained and can perform all calculations required for estimating gmp and intensity maps due to earthquakes, automatically or manually. An initial data processing, by baseline correcting and removing records containing glitches or low signal-to-noise ratio, is performed. The system then assigns a hypocentral location using first arrivals and a simplified 3D model, followed by a moment tensor inversion, which is performed using a pre-calculated Receiver Green's Tensors (RGT) database for a realistic 3D model of Mexico. A backup system to compute epicentral location and magnitude is in place. A Bayesian Kriging is employed to combine recorded values with grids of computed gmp. The latter are obtained by using appropriate ground motion prediction equations (for pgv, pga and SA with T=0.3, 0.5, 1 and 1.5 s ) and numerical simulations performed in real time, using the aforementioned RGT database (for SA with T=2, 2.5 and 3 s). Estimated intensity maps are then computed using SA(T=2S) to Modified Mercalli Intensity correlations derived for central Mexico. The maps are made available to the institutions in charge of the disaster prevention systems. In order to analyze the accuracy of the maps, we compare them against observations not considered in the

  2. An In Vitro Approach to Study Effects of Prebiotics and Probiotics on the Faecal Microbiota and Selected Immune Parameters Relevant to the Elderly.

    Science.gov (United States)

    Liu, Yue; Gibson, Glenn R; Walton, Gemma E

    2016-01-01

    The aging process leads to alterations of gut microbiota and modifications to the immune response, such changes may be associated with increased disease risk. Prebiotics and probiotics can modulate microbiome changes induced by aging; however, their effects have not been directly compared. The aim of this study was to use anaerobic batch culture fermenters to assess the impact of various fermentable carbohydrates and microorganisms on the gut microbiota and selected immune markers. Elderly volunteers were used as donors for these experiments to enable relevance to an aging population. The impact of fermentation supernatants on immune markers relevant to the elderly were assessed in vitro. Levels of IL-1β, IL-6, IL-8, IL-10 and TNF-α in peripheral blood mononuclear cell culture supernatants were measured using flow cytometry. Trans-galactooligosaccharides (B-GOS) and inulin both stimulated bifidobacteria compared to other treatments (pprebiotics and probiotics could lead to potentially beneficial effects to host health by targeting specific bacterial groups, increasing saccharolytic fermentation and decreasing inflammation associated with aging. Compared to probiotics, prebiotics led to greater microbiota modulation at the genus level within the fermenters.

  3. Optimization and analysis of the effects of physical parameters in a TRIGA-ADSR

    Energy Technology Data Exchange (ETDEWEB)

    Hassanzadeh, M. [Nuclear Science and Technology Research Institute (NSTRI), Tehran (Iran, Islamic Republic of)

    2017-07-15

    In the current research, sensitivity analysis of the accelerator and fissionable and non-fissionable spallation targets containing U-238, Pb, LBE and W materials, Y{sub n/p} (spallation neutron yield), E{sub p} (proton energy), G (energy gain), φ* (importance of neutron source), K{sub eff} (effective multiplication coefficient), K{sub s} (source multiplication coefficient) and I{sub p} (accelerator current) for two cases of K{sub s} including: 0.91 and 0.97 in an Accelerator Driven Subcritical Reactor TRIGA (TRIGA-ADSR) were studied. These neutronic factors were computed by MCNPX code. The obtained results of this study show that for the Y{sub n/p} and G parameters, there is an optimum energy from 800 to 1000 MeV. Furthermore, according to the results, if this reactor would be operated close to criticality, the effect of reactivity insertion on the core power is raised. Also, the optimum value of K{sub s} = 0.97 was chosen as adequate multiplication coefficient in this research because of appropriate margins. Lastly, the results of these investigations show that analysis of sensitivity and specificity of the accelerator and spallation target factors is required to optimize the neutronic plan of ADSR.

  4. Automated Soil Physical Parameter Assessment Using Smartphone and Digital Camera Imagery

    Directory of Open Access Journals (Sweden)

    Matt Aitkenhead

    2016-12-01

    Full Text Available Here we present work on using different types of soil profile imagery (topsoil profiles captured with a smartphone camera and full-profile images captured with a conventional digital camera to estimate the structure, texture and drainage of the soil. The method is adapted from earlier work on developing smartphone apps for estimating topsoil organic matter content in Scotland and uses an existing visual soil structure assessment approach. Colour and image texture information was extracted from the imagery. This information was linked, using geolocation information derived from the smartphone GPS system or from field notes, with existing collections of topography, land cover, soil and climate data for Scotland. A neural network model was developed that was capable of estimating soil structure (on a five-point scale, soil texture (sand, silt, clay, bulk density, pH and drainage category using this information. The model is sufficiently accurate to provide estimates of these parameters from soils in the field. We discuss potential improvements to the approach and plans to integrate the model into a set of smartphone apps for estimating health and fertility indicators for Scottish soils.

  5. Examining Relationships Between Some Physical Fitness Parameters of Elite Handball Playe rs

    Directory of Open Access Journals (Sweden)

    Ercan ZORBA

    2014-07-01

    Full Text Available The aim of this study was to examine the relationships between sprint speeds, reaction times, strength and vertical jump properties of handball players. 23 handball players having 23.96±2.79 ages mean, 178.57±3.68 heights mean, 77.21±3.98 weights mean 8.30±1.74 sporting age participated in the study. Age, height, weight, sprint speed, reaction time, strength and vertical jump values were measured by instruments. Collected data was recorded in SPSS. Pearson Product Correlation test was used to examine relationships between properties and significant level was accepted as p<0.05. Significant relationships were found between sprint speed and right and left hand light reaction times; values of back strength and vertical jump; BMI and right and l eft handgrip (p<0.05. Consequently, it was found that many physical fitness properties of handball players had correlations and when compared with studies in literature, in terms of strength, sprint speed, reaction times and vertical jump properties, hand ball players showed good condition.

  6. Effect of Physical Property and Surface Morphology of Copper Foil at Electrodeposition Parameter

    Energy Technology Data Exchange (ETDEWEB)

    Woo, Tae Gyu; Park, Il Song; Lee, Man Hyung; Seol, Kyeong Won [Chonbuk National University, Jeonju (Korea, Republic of)

    2014-06-15

    The effect of additives, current density and plated temperature on the surface morphology and physical property, during copper electrodeposition on polyimide (PI) film was investigated. Two kinds of additives, Cl and leveler (additive B), were used in this study. Electrochemical experiments were performed in conjunction with SEM, XRD and four-point probe to characterize the morphology and mechanical characteristics of copper electrodeposited in the presence of the additives. The surface roughness, crystal growth orientation and resistivity was controlled by the concentration of additive B. High resistivity and lower peel strength were observed on the surface of the copper layer electroplated in the electrolyte without additive B. However, a uniform surface, lower resistivity and high flexibility were obtained with a combination of 20 ppm Cl and 100 ppm additive B. Large particles were observed on the surface of the copper layer electroplated using a current density of 25 mA/cm{sup 2}, but a uniform surface and lower resistivity were obtained using a current density of 10 mA/cm{sup 2}. One of the required important properties of FCCL is flexibility of the copper foil. High flexibility of FCCL was obtained at a low current density, rather than a high current density. Moreover, a reasonable current density is 20 mA/cm{sup 2}, considering the productivity and mechanical properties of copper foil.

  7. Relationship of Physical Parameters in Pb-Contaminated by Stabilization/Solidification Method

    Directory of Open Access Journals (Sweden)

    Ahmad Tajudin Saiful Azhar

    2016-01-01

    Full Text Available This research was performed to investigate the relationship between compressive strength, density and water absorption of Pb-contaminated soil treated by Ordinary Portland cement (OPC incorporated with sugarcane bagasse (SCB using the Stablisation/Solidification (S/S method. The SCB and OPC varying from 5% to 15% was added to stabilize and solidify the Pb-contaminated soil. The cylindrical samples were prepared and cured at room temperature for 28 days. Unconfined compression test, density test and water absorption test were conducted on these samples. The relationship between these variables were determined using simple statistical method by Analysis of Variance (ANOVA. Results indicate that there is a strong relationship between compressive strength and density with a regression coefficient of 77.4%. There is also a significant relationship between density and water absorption of approximately 70.7%. In addition, compressive strength and water absorption produced a strong relationship which is 73.6% of variability in strength development. In a nutshell, the strong relationship between these three variables represent the actual physical characteristics in S/S application.

  8. The influence of spring length on the physical parameters of simple harmonic motion

    International Nuclear Information System (INIS)

    Triana, C A; Fajardo, F

    2012-01-01

    The aim of this work is to analyse the influence of spring length on the simple harmonic motion of a spring-mass system. In particular, we study the effect of changing the spring length on the elastic constant k, the angular frequency ω and the damping factor γ of the oscillations. To characterize the behaviour of these variables we worked with a series of springs of seven different lengths, in which the elastic constant was found by means of the spring-elongation measurement and ω was obtained from the measurement of the oscillation period T of a suspended mass. The oscillatory movement was recorded using a force sensor and the γ value was determined by the fit of the envelope oscillations. Graphical analysis of the results shows that k, ω and γ decrease when the natural spring length increases. This experiment can be performed with equipment normally found in undergraduate physics laboratories. In addition, through graphical analysis students can deduce some relationships between variables that determine the simple harmonic motion behaviour. (paper)

  9. An effect of re-extraction crystallization parameters on physical and chemical properties of AUC

    International Nuclear Information System (INIS)

    Yahi, Boussad

    1990-07-01

    This study is concerned with direct cristallization of ammonium uranyl carbonate (AUC) from a uranium loaded organic phase (30% TBP in kerosene), with ammonium carbonate (NH4)2 CO3. The effects of operating conditions (NH4)2 CO3 concentration, flowration residence time, temperature on the physical properties of AUC crystals (particle size distribution, specific area, density..) are reported. All products were identified (both by chemical analysis, X-Ray diffraction) as being ammonium uranyl ratio and (NH4)2 CO3 concentration favor the formation of fine AUC grains and aggregates. This is due mainly to the high concentration of (NH4)+ in the system which leads to a high solution supersaturation and consequently to a rapid formation rate of crystal (germination). The reverse phenomenon is observed at low phase ratio and (NH4)2 CO3 concentration, where germination and crystal growth ara slow and the product is mainly monocrystal. In the intermediate range, a mixture of polycrystal and aggregates is obtained. Residence time and temperature are also shown to have an effect on the processes (the effect of time being more important than temperature)

  10. Analysis of water sorption isotherms of amorphous food materials by solution thermodynamics with relevance to glass transition: evaluation of plasticizing effect of water by the thermodynamic parameters.

    Science.gov (United States)

    Shimazaki, Eriko; Tashiro, Akiko; Kumagai, Hitomi; Kumagai, Hitoshi

    2017-04-01

    Relation between the thermodynamic parameters obtained from water sorption isotherms and the degree of reduction in the glass transition temperature (T g ), accompanied by water sorption, was quantitatively studied. Two well-known glassy food materials namely, wheat gluten and maltodextrin were used as samples. The difference between the chemical potential of water in a solution and that of pure water ([Formula: see text]), the difference between the chemical potential of solid in a solution and that of a pure solid ([Formula: see text]), and the change in the integral Gibbs free energy ([Formula: see text]) were obtained by analyzing the water sorption isotherms using solution thermodynamics. The parameter [Formula: see text] correlated well with ΔT g (≡T g  - T g0 ; where T g0 is the glass transition temperature of dry material), which had been taken to be an index of plasticizing effect. This indicates that plasticizing effect of water on foods can be evaluated through the parameter [Formula: see text].

  11. Design of a Data Catalogue for Perdigão-2017 Field Experiment: Establishing the Relevant Parameters, Post-Processing Techniques and Users Access

    Science.gov (United States)

    Palma, J. L.; Belo-Pereira, M.; Leo, L. S.; Fernando, J.; Wildmann, N.; Gerz, T.; Rodrigues, C. V.; Lopes, A. S.; Lopes, J. C.

    2017-12-01

    Perdigão is the largest of a series of wind-mapping studies embedded in the on-going NEWA (New European Wind Atlas) Project. The intensive observational period of the Perdigão field experiment resulted in an unprecedented volume of data, covering several wind conditions through 46 consecutive days between May and June 2017. For researchers looking into specific events, it is time consuming to scrutinise the datasets looking for appropriate conditions. Such task becomes harder if the parameters of interest were not measured directly, instead requiring their computation from the raw datasets. This work will present the e-Science platform developed by University of Porto for the Perdigao dataset. The platform will assist scientists of Perdigao and the larger scientific community in extrapolating the datasets associated to specific flow regimes of interest as well as automatically performing post-processing/filtering operations internally in the platform. We will illustrate the flow regime categories identified in Perdigao based on several parameters such as weather type classification, cloud characteristics, as well as stability regime indicators (Brunt-Väisälä frequency, Scorer parameter, potential temperature inversion heights, dimensionless Richardson and Froude numbers) and wind regime indicators. Examples of some of the post-processing techniques available in the e-Science platform, such as the Savitzky-Golay low-pass filtering technique, will be also presented.

  12. Physical Parameters of Late Type Spiral Galaxies I-Mass and Luminosity of NGC 6946

    Directory of Open Access Journals (Sweden)

    Sug-Whan Kim

    1985-12-01

    Full Text Available Using Brandt model the mass distribution of the late type spiral galaxy NGC 6946 was derived, and the total mass was reestimated to understand the M/L ratio of this galaxy. Two kinds of the rotation curve with shape parameter n = 1 and 3.3 were examined. The followings are the main results; (1 The total masses of NGC 6946 are 3.1 x 10^11*M (n=1 and 2.8 x 10^11*M (n=3.3 respectively, and the corresponding M/L are about 17 and 16 for both cases. (2 The optical image in the blue light, whose radius is 9.6 kpc, has 8 x 10^10*Msolar and 1.4 x 10^11*Msolar. These give the value of M/L about 5 and 8 respectively. (3 The masses and M/L of the nuclear region within 1.2 kpc are 4.0 x 10^9*Msolar, 4.7 x 10^9*Msolar and 3, 4 for both cases. Those of the disk from 1.2 kpc to 9.6 kpc are 7.6 x 10^10*Msolar, 1.4 x 10^11*Msolar, and 5, 8. (4 The masses of the outer halo extended to few hundreds kiloparsecs are 2.3 x 10^11*Msolar and 1.4 x 10^11*Msolar. The corresponding M/L are about 62 and 37.

  13. Effects of Munari powder on physical and sensory-motor parameters: a preliminary report

    Directory of Open Access Journals (Sweden)

    Nejc Sarabon

    2015-08-01

    Full Text Available Munari powder is broadly used in physical medicine and rehabilitation to decrease pain and help normalize sensory-motor function. It operates as TPRV1 agonist and “stops” generation of action potentials in pain nerve fibers. This is a short report of a pilot study on 20 subjects. Every subject underwent four visits to our laboratory, where the Munari applications and related measurements of its effects took place. Each of the healthy adults received the following applications: (1 placebo, i.e. 0% cayenne pepper mixture, consisting only of water and kaolin, (2 weak, i.e. 2.5% cayenne pepper mixture, (3 medium, i.e. 5.0% cayenne pepper mixture, and (4 strong, i.e. 10% cayenne pepper mixture. The assessments were carried out before the Munari powder patch application, right after the application, and 15 and 30 min after the termination of the 20-minute Munari powder patch application. We measured subjective cold/hot feeling on visual analogue scale, blood pressure, body temperature, skin light touch sensations, sense for two-point discrimination, and pain threshold to the mechanical stimulus. Besides these tests, maximal voluntary force during isometric trunk extension and the sitting balance test were performed. The preliminary results indicate that the 5% concentration of cayenne pepper mixture is the best choice because no additional effects were observed with the 10% concentration and the effects are higher than with 2.5% concentration. Whether this will be also thrue for the patients suffering pain ought to be determined.

  14. The Effect of Freezing and Hydrocolloids on the Physical Parameters of Strawberry Mass-Based Desserts

    Directory of Open Access Journals (Sweden)

    Boča Sigita

    2014-07-01

    Full Text Available The aim of the study was to evaluate the effect of freezing, thickening and storage on the physical properties of the strawberry desserts made with addition of various hydrocolloids. The strawberry cultivars ‘Polka’, ‘Honeoye’, and ‘Senga Sengana’ harvested in Latvia were used in the study. The strawberries were processed in a blender for obtaining a homogenous mass. The strawberry mass was analyzed fresh and after storage at -18 °C. Both fresh and frozen strawberry mass samples with added gelatine, xanthan gum, and sodium carboxymethyl cellulose were whisked until obtaining dessert. For determination of the optimum hydrocolloid amount, sensory evaluation was done using a five-point hedonic scale. Moisture, soluble solids content, density, and pH of the product were determined. Apparent viscosity was measured using a rotational viscometer DV–III Ultra. Consistency of the dessert during its storage was evaluated using a texture analyser TA.XT.plus. The results of sensory evaluation allow concluding that in order to provide the most acceptable consistency, colour, and taste of strawberry dessert, the optimum quantity of carboxymethyl cellulose and xanthan gum to be added is 0.6% and that of gelatine is 6%. During freezing, the soluble solids content and pH level decreased in the strawberry mass, whereas the addition of hydrocolloids increased these values. The moisture content in strawberry puree, in its turn, as a result of freezing increased under the influence of syneresis, but added hydrocolloids, on the contrary, decreased this influence. Also the viscosity and consistency of the strawberry puree prepared from the researched cultivars decreased under the influence of freezing, whereas the addition of hydrocolloids increased both the values, making the strawberry dessert firmer. The research suggests that strawberry dessert with gelatine had the most pronounced changes during storage, but strawberry dessert with added xanthan

  15. Design of a hybrid (wired/wireless) acquisition data system for monitoring of cultural heritage physical parameters in Smart Cities.

    Science.gov (United States)

    García Diego, Fernando-Juan; Esteban, Borja; Merello, Paloma

    2015-03-25

    Preventive conservation represents a working method and combination of techniques which helps in determining and controlling the deterioration process of cultural heritage in order to take the necessary actions before it occurs. It is acknowledged as important, both in terms of preserving and also reducing the cost of future conservation measures. Therefore, long-term monitoring of physical parameters influencing cultural heritage is necessary. In the context of Smart Cities, monitoring of cultural heritage is of interest in order to perform future comparative studies and load information into the cloud that will be useful for the conservation of other heritage sites. In this paper the development of an economical and appropriate acquisition data system combining wired and wireless communication, as well as third party hardware for increased versatility, is presented. The device allows monitoring a complex network of points with high sampling frequency, with wired sensors in a 1-wire bus and a wireless centralized system recording data for monitoring of physical parameters, as well as the future possibility of attaching an alarm system or sending data over the Internet. This has been possible with the development of three board's designs and more than 5000 algorithm lines. System tests have shown an adequate system operation.

  16. An In Vitro Approach to Study Effects of Prebiotics and Probiotics on the Faecal Microbiota and Selected Immune Parameters Relevant to the Elderly.

    Directory of Open Access Journals (Sweden)

    Yue Liu

    Full Text Available The aging process leads to alterations of gut microbiota and modifications to the immune response, such changes may be associated with increased disease risk. Prebiotics and probiotics can modulate microbiome changes induced by aging; however, their effects have not been directly compared. The aim of this study was to use anaerobic batch culture fermenters to assess the impact of various fermentable carbohydrates and microorganisms on the gut microbiota and selected immune markers. Elderly volunteers were used as donors for these experiments to enable relevance to an aging population. The impact of fermentation supernatants on immune markers relevant to the elderly were assessed in vitro. Levels of IL-1β, IL-6, IL-8, IL-10 and TNF-α in peripheral blood mononuclear cell culture supernatants were measured using flow cytometry. Trans-galactooligosaccharides (B-GOS and inulin both stimulated bifidobacteria compared to other treatments (p<0.05. Fermentation supernatants taken from faecal batch cultures supplemented with B-GOS, inulin, B. bifidum, L. acidophilus and Ba. coagulans inhibited LPS induced TNF-α (p<0.05. IL-10 production, induced by LPS, was enhanced by fermentation supernatants from faecal batch cultures supplemented with B-GOS, inulin, B. bifidum, L. acidophilus, Ba. coagulans and Bac. thetaiotaomicron (p<0.05. To conclude, prebiotics and probiotics could lead to potentially beneficial effects to host health by targeting specific bacterial groups, increasing saccharolytic fermentation and decreasing inflammation associated with aging. Compared to probiotics, prebiotics led to greater microbiota modulation at the genus level within the fermenters.

  17. Oral delivery of live yeast Debaryomyces hansenii modulates the main innate immune parameters and the expression of immune-relevant genes in the gilthead seabream (Sparus aurata L.).

    Science.gov (United States)

    Reyes-Becerril, Martha; Salinas, Irene; Cuesta, Alberto; Meseguer, José; Tovar-Ramirez, Dariel; Ascencio-Valle, Felipe; Esteban, Maria Angeles

    2008-12-01

    Microorganisms isolated from fish can be used as prophylactic tools for aquaculture in the form of probiotic preparations. The purpose of this study was to evaluate the effects of dietary administration of the live yeast Debaryomyces hansenii CBS 8339 on the gilthead seabream (Sparus aurata L.) innate immune responses. Seabream were fed control or D. hansenii-supplemented diets (10(6) colony forming units, CFU g(-1)) for 4 weeks. Humoral (seric alternative complement and peroxidase activities), and cellular (peroxidase, phagocytic, respiratory burst and cytotoxic activities) innate immune parameters and antioxidant enzymes (superoxide dismutase (SOD) and catalase (CAT)) were measured from serum, head-kidney leucocytes and liver, respectively, after 2 and 4 weeks of feeding. Expression levels of immune-associated genes, Hep, IgM, TCR-beta, NCCRP-1, MHC-II alpha, CSF-1R, C3, TNF-alpha and IL-1 beta, were also evaluated by real-time PCR in head-kidney, liver and intestine. Humoral immune parameters were not significantly affected by the dietary supplementation of yeast at any time of the experiment. On the other hand, D. hansenii administration significantly enhanced leucocyte peroxidase and respiratory burst activity at week 4. Phagocytic and cytotoxic activities had significantly increased by week 2 of feeding yeast but unchanged by week 4. A significant increase in liver SOD activity was observed at week 2 of feeding with the supplemented diet; however CAT activity was not affected by the dietary yeast supplement at any time of the experiment. Finally, the yeast supplemented diet down-regulated the expression of most seabream genes, except C3, in liver and intestine and up-regulated all of them in the head-kidney. These results strongly support the idea that live yeast Debaryomyces hansenii strain CBS 8339 can stimulate the innate immune parameters in seabream, especially at cellular level.

  18. Multilayer insulation (MLI) in the Superconducting Super Collider: A practical engineering approach to physical parameters governing MLI thermal performance

    International Nuclear Information System (INIS)

    Gonczy, J.D.; Boroski, W.N.; Niemann, R.C.

    1989-03-01

    Multilayer insulation (MLI) is employed in cryogenic devices to control the heat load of those devices. The physics defining the thermal performance of an MLI system is extremely complex due to the thermal dynamics of numerous interdependent parameters which in themselves contribute differently depending on whether boundary conditions are transient or steady-state. The Multilayer Insulation system for the Superconducting Super Collider (SSC) consists of full cryostat length assemblies of aluminized polyester film, fabricated in the form of blankets, and installed as blankets to the 4.5K cold mass, and the 20K and 80K thermal radiation shields. Approximately 40,000 blankets will be required in the 10,000 cryogenic devices comprising the SSC accelerator. Each blanket will be nearly 56 feet long by 6 feet wide and will consist of as many as 32 reflective and 31 spacer layers of material. Discussed are MLI material choices, and the physical parameters which contribute to the operational performance of MLI systems. Disclosed is a method for fabricating MLI blankets by employing a large diameter winding mandrel having a circumference sufficient for the required blanket length. The blanket fabrication method assures consistency in mass produced MLI blankets by providing positive control of the dimensional parameters which contribute to the MLI blanket thermal performance. The fabrication method can be used to mass produce prefabricated MLI blankets that by virtue of the product have inherent features of dimensional stability, three-dimensional uniformity, controlled layer density, layer-to-layer registration, interlayer cleanliness, and interlayer material to accommodate thermal contraction differences. 9 refs., 4 figs., 2 tabs

  19. Physical body parameters of red-crowned cranes Grus japonensis by sex and life stage in eastern Hokkaido, Japan.

    Science.gov (United States)

    Inoue, Masako; Shimura, Ryoji; Uebayashi, Akiko; Ikoma, Shinobu; Iima, Hiroko; Sumiyoshi, Takashi; Teraoka, Hiroki; Makita, Kohei; Hiraga, Takeo; Momose, Kunikazu; Masatomi, Hiroyuki

    2013-01-01

    Red-crowned (or Japanese) cranes Grus japonensis are native to eastern Hokkaido, Japan--the island population, and mainland Asia--the continental population that migrates from breeding grounds along the Amur River Basin to winter in east China and the Korean Peninsula. The island population was reduced to about 50-60 birds in early part of the 20th century. Since 1950s, the population has increased to more than 1,300 as a consequence of human-provided food in winter, resulted in change of their habitats and food resource. From the carcasses of 284 wild cranes from the island population, collected in Hokkaido since 1976 until 2010, we measured six physical parameters (body weight and lengths of body, wing, tarsus, tail and exposed culmen) and divided into groups by sex and three developmental stages (juvenile, yearling and adult). All parameters of males were larger than those of females at the same stage. Total body length of females tends to grow up earlier than males, in contrast to body weight. Obvious time trends were not observed in these all parameters during 34 years for these six categories measured, except total length of male juveniles, which showed a significant increasing trend. These results provide the first extensive data on body size and mass in the wild red-crowned cranes.

  20. Effects of physical parameters on the heat and mass transfer characteristics in freeze-drying processes of fruits and vegetables

    Energy Technology Data Exchange (ETDEWEB)

    Guo, Yuming; Liu, Lijuan; Liang, Li [Shanxi Agricultural Univ. (China). Coll. of Engineering and Technology], E-mail: guoyuming99@sina.com

    2008-07-01

    Studying the effects mechanism of material physical parameters on the heat and mass transfer characteristics, the process parameters and energy consumption during freeze-drying process is of importance in improving the vacuum freeze-drying process with low energy consumption. In this paper, the sliced and mashed carrots of one variety were selected to perform the vacuum freeze-drying experiments. First, the variation laws of surface temperatures and sublimation front temperatures of the two shapes samples during the freeze-drying processes were analyzed, and it was verified that the process of sliced carrots is controlled by mass transfer, while that of the mashed ones is heat-transfer control. Second, the variations of water loss rate, energy consumption and temperature of the two shapes samples under the appropriate heating plate temperature and the different drying chamber pressure were analyzed. In addition, the effects of thermal conductivity and thermal diffusivity on freeze-drying time and process parameters were discussed by utilizing the theory of heat and mass transfer. In conclusion, under the heat transfer condition, the temperature of the heating plate should be as high as possible within the permitted range, and the drying chamber pressure should be set at optimal level. While under the mass transport-limited condition, the pressure level need to be altered in short time. (author)

  1. Determination of Physicals, Chemical, Biologicals and Radioactivity Parameters of Sediments and Water Samples of Seropan River of First Period

    International Nuclear Information System (INIS)

    Tri Rusmanto; Agus Taftazani

    2007-01-01

    Seropan river water quality as residential water resources can be controlled by physical, chemical, and biological parameters. The water quality with the parameters of temperature, suspended solid (SS), gross β radioactivity, hardwater, COD, BOD, Escherichia Coli have been experimentally conducted. The sediment and water samples have been taken at February and August 2006. Measurement result of Seropan river water quality showed that the temperature was 28°C, maximum SS was 48 mg/L, maximum pH was 6.8 maximum hardwater was 257.49 mg/L, maximum COD was 8 mg/L, maximum BOD was 4.9 mg/L, maximum bacteria E. coli > 2400 mpn/100 mL, maximum water gross β was 0.9071 Bq/L. All the parameters were lower than maximum permissible for water condition that decided by Governor of Yogyakarta Special Province No/214/Kpts/1991 and Public Health Minister of Republic of Indonesia Number 907/Menkes/SK/VlI/2002. Sediment sample can not be evaluated because it was not included yet in the river water quality natural radionuclides gamma transmitter identified in river water samples were Tl-208 and K-40. More element detected in sediment samples, they were, Tl-208, Ac-228, Ra-226, Pb-212, Pb-214, Bi-214, Ac-228, Ac-228 and of K-40. (author)

  2. The professional methodological teaching performance of the professor of Physical education. Set of parameters for its measurement

    Directory of Open Access Journals (Sweden)

    Orlando Pedro Suárez Pérez

    2017-07-01

    Full Text Available This work was developed due to the need to attend to the difficulties found in the Physical Education teachers of the municipality of San Juan and Martínez during the development of the teaching-learning process of Basketball, which threaten the quality of the classes, sports results and preparation of the School for life. The objective is to propose parameters that allow measuring the professional teaching methodological performance of these teachers. The customized behavior of the research made possible the diagnosis of the 26 professors taken as a sample, expressing the traits that distinguish their efficiency, determining their potentialities and deficiencies. During the research process, theoretical, empirical and statistical methods were used, which permitted to corroborate the real existence of the problem, as well as the evaluation of its impact, which revealed a positive transformation in pedagogical practice. The results provide a concrete and viable answer for the improvement of the evaluation of the teaching-methodological component of the Physical Education teacher, which constitutes an important material of guidance for methodologists and managers related to the instrumental cognitive, procedural and attitudinal performance , In order to conduct from the precedent knowledge, the new knowledge and lead to a formative process, with a contemporary vision, offering methodological resources to control the quality of Physical Education lessons.

  3. Effects of regular physical activity on anthropometric and functional parameters in young and old women

    Directory of Open Access Journals (Sweden)

    Sebastião Gobbi

    2001-12-01

    Full Text Available The aim of the present study was to verify the strength levels and the arm cross-sectional-area (AMB of young and old women who practice physical activity regularly. Thirty female subjects were selected and distributed into two groups: young (G1 and old (G2. They were evaluated on maximal voluntary strength of elbow flexor muscle by 1RM (one-maximal repetition test (“biceps curl”, and the AMB, through the measures of arm circumference (CB and triceps skinfold (DCTr, which were then used with the equation proposed by Frisancho (1984: AMB (cm2 = [(CB - pDCTr2 / 4p] - 6.5, in both dominant (MD and non dominant (MND arms. Strength (kg and AMB (cm2 were analyzed by ANOVA to a significance level of 5%. The G2 strength level was significantly (p RESUMO O presente estudo teve como objetivo verificar os níveis de força e a área muscular do braço (AMB de mulheres jovens e idosas praticantes de atividade física regular. Para isso foram selecionados 30 sujeitos do sexo feminino, distribuídos em dois grupos: jovem (G1 e idoso (G2. Avaliou-se a força voluntária máxima dos músculos flexores do cotovelo pelo teste de 1RM (repetição máxima exercício “rosca unilateral” , e a AMB, através das medidas de circunferência de braço (CB e dobra cutânea tricipital (DCTr, que posteriormente foram incluídas na equação proposta por Frisancho (1984: AMB (cm = [(CB - pDCTr2 / 4p] - 6.5, em ambos os membros dominante (MD e não dominante (MND. Os valores de força (em kg e AMB (em cm2 foram analisados por ANOVA com nível de significância pré-estabelecido em 5%. O nível de força do G2 foi significativamente (p<0,01 menor que G1, tanto no MD quanto no MND. Em relação à AMB, o MND de G2 mostrou-se maior que G1, o que não ocorreu com o MD. A partir da análise dos resultados, concluiu-se que apesar do envelhecimento, a prática regular de atividade física pode prevenir a perda de massa muscular (MM. Contudo, a capacidade para gerar for

  4. Theoretical and experimental research on the influence of multiple piezoelectric effects on physical parameters of piezoelectric actuator

    Directory of Open Access Journals (Sweden)

    Liping Shi

    2015-04-01

    Full Text Available Compared with the traditional actuator of machinery and electricity, the piezoelectric actuator has the advantages of a compact structure, small volume, no mechanical friction, athermancy and no electromagnetic interference. Therefore, it has high application value in the fields of MEMS, bioengineering, medical science and so on. This article draws conclusions from the influence of multiple piezoelectric effects on the physical parameters (dielectric coefficient, equivalent capacity, energy conversion and piezoelectric coefficient of piezoelectric actuators. These data from theoretical and experimental research show the following: (1 The rate between the dielectric coefficient of piezoelectric in mechanical freedom and clamping is obtained from the secondary direct piezoelectric effect, which enhances the dielectric property, increases the dielectric coefficient and decreases the coefficient of dielectric isolation; (2 Under external field, E n ( ex = E 1 , exterior stress T = 0, that is to say, under the boundary condition of mechanical freedom, piezoelectric can store electric energy and elasticity, which obtains power density, elastic density and an electromechanical coupling factor; (3 According to the piezoelectric strain S i ( 1 , piezoelectric displacement D m ( 2 and piezoelectric strain S i ( 3 of multiple piezoelectric effects, when the dielectric coefficient of the first converse piezoelectric effect ε33 is 1326 and the dielectric coefficient of the secondary direct piezoelectric effect increases to 3336, the dielectric coefficient of the ceramic chip increases. When the piezoelectric coefficient of the first converse piezoelectric effect d33 is 595 and the piezoelectric coefficient of the secondary direct piezoelectric effect decreases to 240, the piezoelectric coefficient of the ceramic chip will decrease. It is of major significance both in the applications and in basic theory to research the influence of multiple piezoelectric

  5. PHYSICS

    CERN Multimedia

    D. Acosta

    2010-01-01

    The Physics Groups are actively engaged on analyses of the first data from the LHC at 7 TeV, targeting many results for the ICHEP conference taking place in Paris this summer. The first large batch of physics approvals is scheduled for this CMS Week, to be followed by four more weeks of approvals and analysis updates leading to the start of the conference in July. Several high priority analysis areas were organized into task forces to ensure sufficient coverage from the relevant detector, object, and analysis groups in the preparation of these analyses. Already some results on charged particle correlations and multiplicities in 7 TeV minimum bias collisions have been approved. Only one small detail remains before ICHEP: further integrated luminosity delivered by the LHC! Beyond the Standard Model measurements that can be done with these data, the focus changes to the search for new physics at the TeV scale and for the Higgs boson in the period after ICHEP. Particle Flow The PFT group is focusing on the ...

  6. Modeling of Toxicity-Relevant Electrophilic Reactivity for Guanine with Epoxides: Estimating the Hard and Soft Acids and Bases (HSAB) Parameter as a Predictor.

    Science.gov (United States)

    Zhang, Jing; Wang, Chenchen; Ji, Li; Liu, Weiping

    2016-05-16

    According to the electrophilic theory in toxicology, many chemical carcinogens in the environment and/or their active metabolites are electrophiles that exert their effects by forming covalent bonds with nucleophilic DNA centers. The theory of hard and soft acids and bases (HSAB), which states that a toxic electrophile reacts preferentially with a biological macromolecule that has a similar hardness or softness, clarifies the underlying chemistry involved in this critical event. Epoxides are hard electrophiles that are produced endogenously by the enzymatic oxidation of parent chemicals (e.g., alkenes and PAHs). Epoxide ring opening proceeds through a SN2-type mechanism with hard nucleophile DNA sites as the major facilitators of toxic effects. Thus, the quantitative prediction of chemical reactivity would enable a predictive assessment of the molecular potential to exert electrophile-mediated toxicity. In this study, we calculated the activation energies for reactions between epoxides and the guanine N7 site for a diverse set of epoxides, including aliphatic epoxides, substituted styrene oxides, and PAH epoxides, using a state-of-the-art density functional theory (DFT) method. It is worth noting that these activation energies for diverse epoxides can be further predicted by quantum chemically calculated nucleophilic indices from HSAB theory, which is a less computationally demanding method than the exacting procedure for locating the transition state. More importantly, the good qualitative/quantitative correlations between the chemical reactivity of epoxides and their bioactivity suggest that the developed model based on HSAB theory may aid in the predictive hazard evaluation of epoxides, enabling the early identification of mutagenicity/carcinogenicity-relevant SN2 reactivity.

  7. Walkability parameters, active transportation and objective physical activity: moderating and mediating effects of motor vehicle ownership in a cross-sectional study.

    Science.gov (United States)

    Eriksson, Ulf; Arvidsson, Daniel; Gebel, Klaus; Ohlsson, Henrik; Sundquist, Kristina

    2012-10-05

    Neighborhood walkability has been associated with physical activity in several studies. However, as environmental correlates of physical activity may be context specific, walkability parameters need to be investigated separately in various countries and contexts. Furthermore, the mechanisms by which walkability affects physical activity have been less investigated. Based on previous research, we hypothesized that vehicle ownership is a potential mediator. We investigated the associations between walkability parameters and physical activity, and the mediating and moderating effects of vehicle ownership on these associations in a large sample of Swedish adults. Residential density, street connectivity and land use mix were assessed within polygon-based network buffers (using Geographic Information Systems) for 2,178 men and women. Time spent in moderate to vigorous physical activity was assessed by accelerometers, and walking and cycling for transportation were assessed by the International Physical Activity Questionnaire. Associations were examined by linear regression and adjusted for socio-demographic characteristics. The product of coefficients approach was used to investigate the mediating effect of vehicle ownership. Residential density and land use mix, but not street connectivity, were significantly associated with time spent in moderate to vigorous physical activity and walking for transportation. Cycling for transportation was not associated with any of the walkability parameters. Vehicle ownership mediated a significant proportion of the association between the walkability parameters and physical activity outcomes. For residential density, vehicle ownership mediated 25% of the association with moderate to vigorous physical activity and 20% of the association with the amount of walking for transportation. For land use mix, the corresponding proportions were 34% and 14%. Vehicle ownership did not moderate any of the associations between the walkability

  8. Biomonitoring polycyclic aromatic hydrocarbons by Salix matsudana leaves: A comparison with the relevant air content and evaluation of environmental parameter effects

    Science.gov (United States)

    Zhao, Xiangai; He, Miao; Shang, Haibo; Yu, Hongling; Wang, Hao; Li, Huijie; Piao, Jingyi; Quinto, Maurizio; Li, Donghao

    2018-05-01

    Studies on seasonal distribution characteristics of polycyclic aromatic hydrocarbons (PAHs) in Salix matsudana leaves covering its annual life cycle were carried out in order to evaluate plant leaf response sensitivity to air pollution. Salix matsudana leaves were collected throughout different development phases of plant leaf inclusive of bud break to fallen leaves, covering from spring (May) to autumn (November). Simultaneously, particle and gas samples were collected using a high volume air sampler. Seven different PAHs were determined simultaneously in these samples. The temperature dependence of the partitioning of PAHs in air and plant leaves was investigated and the results were incorporated into a mathematical model. The measured plant/air partition coefficients have been found to be exponentially proportional to the reciprocal temperature, in agreement with theoretical expectations. Furthermore, in order to define the influence of different parameters on PAH adsorption on plant leaves, area and lipid leaf content were also measured. Results demonstrated that temperature plays a very important role in PAHs partitioning and that this value should be carefully considered during sampling, in order to obtain the best correlation between PAHs concentration in air and leaves.

  9. Site-specific analysis of radiological and physical parameters for cobbly soils at the Gunnison, Colorado, processing site

    International Nuclear Information System (INIS)

    1994-01-01

    The remedial action at the Gunnison, Colorado, processing site is being performed under the Uranium Mill Tailings Radiation Control Act (UMTRCA) of 1978. Under UMTRCA, the US Environmental Protection Agency (EPA) is charged with the responsibility of developing appropriate and applicable standards for the cleanup of radiologically contaminated land and buildings at 24 designated sites, including the Gunnison, Colorado, inactive processing site. Section 108 of Public Law 95-604 states that the US Department of Energy (DOE) shall ''select and perform remedial actions at the designated processing sites and disposal sites in accordance with the general standards'' prescribed by the EPA. Regulations governing the required remedial action at inactive uranium processing sites were promulgated by the EPA in 1983 and are contained in 40 CFR Part 192 (1993), Health and Environmental Protection Standards for Uranium and Thorium Mill Tailings. This document describes the radiological and physical parameters for the remedial action of the soil

  10. Methods, Devices and Computer Program Products Providing for Establishing a Model for Emulating a Physical Quantity Which Depends on at Least One Input Parameter, and Use Thereof

    DEFF Research Database (Denmark)

    2014-01-01

    The present invention proposes methods, devices and computer program products. To this extent, there is defined a set X including N distinct parameter values x_i for at least one input parameter x, N being an integer greater than or equal to 1, first measured the physical quantity Pm1 for each...

  11. Physical and chemical parameters of sediment extraction and fractionation that influence toxicity, as evaluated by microtox (trade name)

    International Nuclear Information System (INIS)

    Ho, K.T.Y.; Quinn, J.G.

    1993-01-01

    Several physical and chemical parameters of sediment extraction and fractionation of organic compounds that influence bioassay results were evaluated. Each parameter was evaluated with a photoluminescent bacterial bioassay (Microtox) as an end point. Three solvents (acetonitrile, acetone, and methanol) were studied for their ability to extract toxic organic components from marine sediments. Acetone extracted the most toxicity, with no difference between acetonitrile and methanol. Two methods of fractionating sediment extracts (silica-gel-column chromatography (SGCC) and acid-base fractionation) were compared. SGCC was more useful because it resulted in a wider range of responses and was faster to perform than acid-base fractionation. Microtox was used to rank four marine sediments with respect to toxicity and to determine if one chemical class (or fraction) was consistently more toxic among different sediments. With some caveats, Microtox results agreed with general chemical concentration trends and other bioassay results in distinguishing between contaminated and noncontaminated sediments. Although results indicated there was not a consistently most toxic fraction among sediments, there was a consistently least toxic fraction. The effect of sediment storage time on toxicity was also evaluated. Results indicated that the most stable chemical fraction (containing nonpolar hydrocarbons) did not change toxicologically for 30 weeks, whereas the more chemically active fraction (containing ketones, quinones, and carboxyls) changed as soon as one week

  12. Design and analysis of gradient index metamaterial-based cloak with wide bandwidth and physically realizable material parameters

    Science.gov (United States)

    Bisht, Mahesh Singh; Rajput, Archana; Srivastava, Kumar Vaibhav

    2018-04-01

    A cloak based on gradient index metamaterial (GIM) is proposed. Here, the GIM is used, for conversion of propagating waves into surface waves and vice versa, to get the cloaking effect. The cloak is made of metamaterial consisting of four supercells with each supercell possessing the linear spatial variation of permittivity and permeability. The spatial variation of material parameters in supercells allows the conversion of propagating waves into surface waves and vice versa, hence results in reduction of electromagnetic signature of the object. To facilitate the practical implementation of the cloak, continuous spatial variation of permittivity and/or permeability, in each supercell, is discretized into seven segments and it is shown that there is not much deviation in cloaking performance of discretized cloak as compared to its continuous counterpart. The crucial advantage, of the proposed cloaks, is that the material parameters are isotropic and in physically realizable range. Furthermore, the proposed cloaks have been shown to possess bandwidth of the order of 190% which is a significantly improved performance compared to the recently published literature.

  13. INDOOR AIR QUALITY IN HOSPITALS - Verification of the physical parameters of comfort and the concentration of carbon dioxide

    Directory of Open Access Journals (Sweden)

    Waldir Nagel Schirmer

    2010-10-01

    Full Text Available In hospitals, the presence of pollutants in the indoor air creates conditions that may prejudice the recovery of patients and affect the productivity of employees. Thus, these places need air conditioning well designed, to provide adequate ventilation rates to ensure the comfort of its occupants and the aseptic of environments. The present study focused on evaluating the indoor air quality (IAQ in a surgical center and an intensive care unit, by checking the physical parameters of comfort and the concentrations of carbon dioxide, following the procedure recommended by Resolution No. 09 of the National Sanitary Surveillance Agency (ANVISA and to propose an air conditioning system for each of the environments evaluated. The results showed that the IAQ in those environments may be improved, since some of the parameters showed values higher than those recommended by that resolution. High concentrations of CO2 obtained, for example, can be justified by the lack of renewal of air. It is suggested that the air conditioning systems must to be substituted for that allowed the renewal of the air at rates acceptable to the current legislation.

  14. Optimal Physical and Nutrient Parameters for Growth of Trichoderma virens UKMP-1M for Heavy Crude Oil Degradation

    International Nuclear Information System (INIS)

    Ainon Hamzah; Buzarin, M.A.; Aidil Abdul Hamid; Thmanomar, O.; Sahidan Senafi

    2012-01-01

    This study was carried out to determine the optimal parameters for the production of biomass of Trichoderma virens UKMP-1M, a fungus isolated from oil-polluted wastewater. The isolate showed maximum growth at day six after incubation in Mineral Salt Medium (MSM) in the presence of 3 % (v/ v) heavy Khefji Sour crude oil. Although it grew at pH between 5.0 and 7.0, it grew best at pH 5.5. T. virens UKMP-1M grew at temperatures between 25 and 35 degree Celsius, with its highest growth at 30 degree Celsius. Aeration by agitation at 200 rpm was shown to yield the greatest biomass. Peptone at concentration of 1.5 % (w/ v) was determined to be a better nitrogen source than urea, potassium nitrate (KNO 3 ), yeast extract, ammonium sulphate ((NH 4 ) 2 SO 4 ) and ammonium chloride (NH 4 Cl). Addition of 1 % (v/ v) crude oil to the MSM medium led to higher biomass production than the addition of 3 %, 5 %, 7 % and 10 % (v/ v) crude oil. The result also revealed that 40 % of total petroleum hydrocarbon (TPH), 100 % of pristane and 74 % of phytane compounds were degraded after 9 days of incubation at optimal physical and nutrient parameters. (author)

  15. Comparison of hemodynamic and nutritional parameters between older persons practicing regular physical activity, nonsmokers and ex-smokers

    Directory of Open Access Journals (Sweden)

    Rebelatto Marcelo N

    2010-11-01

    Full Text Available Abstract Background Sedentary lifestyle combined with smoking, contributes to the development of a set of chronic diseases and to accelerating the course of aging. The aim of the study was to compare the hemodynamic and nutritional parameters between elderly persons practicing regular physical activity, nonsmokers and ex-smokers. Methods The sample was comprised of 40 elderly people practicing regular physical activity for 12 months, divided into a Nonsmoker Group and an Ex-smoker Group. During a year four trimestrial evaluations were performed, in which the hemodynamic (blood pressure, heart rate- HR and VO2 and nutritional status (measured by body mass index data were collected. The paired t-test and t-test for independent samples were applied in the intragroup and intergroup analysis, respectively. Results The mean age of the groups was 68.35 years, with the majority of individuals in the Nonsmoker Group being women (n = 15 and the Ex-smoker Group composed of men (n = 11. In both groups the variables studied were within the limits of normality for the age. HR was diminished in the Nonsmoker Group in comparison with the Ex-smoker Group (p = 0.045 between the first and last evaluation. In the intragroup analysis it was verified that after one year of exercise, there was significant reduction in the HR in the Nonsmoker Group (p = 0.002 and a significant increase in VO2 for the Ex-smoker Group (p = 0.010. There are no significant differences between the hemodynamic and nutritional conditions in both groups. Conclusion In elderly persons practicing regular physical activity, it was observed that the studied variables were maintained over the course of a year, and there was no association with the history of smoking, except for HR and VO2.

  16. Alcohol levels do not accurately predict physical or mental impairment in ethanol-tolerant subjects: relevance to emergency medicine and dram shop laws.

    Science.gov (United States)

    Roberts, James R; Dollard, Denis

    2010-12-01

    The human body and the central nervous system can develop tremendous tolerance to ethanol. Mental and physical dysfunctions from ethanol, in an alcohol-tolerant individual, do not consistently correlate with ethanol levels traditionally used to define intoxication, or even lethality, in a nontolerant subject. Attempting to relate observed signs of alcohol intoxication or impairment, or to evaluate sobriety, by quantifying blood alcohol levels can be misleading, if not impossible. We report a case demonstrating the disconnect between alcohol levels and generally assigned parameters of intoxication and impairment. In this case, an alcohol-tolerant man, with a serum ethanol level of 515 mg/dl, appeared neurologically intact and cognitively normal. This individual was without objective signs of impairment or intoxication by repeated evaluations by experienced emergency physicians. In alcohol-tolerant individuals, blood alcohol levels cannot always be predicted by and do not necessarily correlate with outward appearance, overt signs of intoxication, or physical examination. This phenomenon must be acknowledged when analyzing medical decision making in the emergency department or when evaluating the ability of bartenders and party hosts to identify intoxication in dram shop cases.

  17. Design of experiment existing parameter physics for supporting of Boron Neutron Capture Therapy (BNCT) method a t the piercing radial beam port of Kartini research reactor

    International Nuclear Information System (INIS)

    Indry Septiana Novitasari; Yosaphat Sumardi; Widarto

    2014-01-01

    The experiment existing parameters physics for supporting of in vivo and in vitro test facility of Boron Neutron Capture Therapy (BNCT) preliminary study at the piercing radial beam port has been done. The existing experiments is needed for determining that the parameter physics is fulfill the BNCT method requirement. To realize the existing experiment have been done by design analysis, methodology, calculation method and some procedure related with radiation safety analysis and environment. Preparation for existing experiment physics such as foil detector of Gold (Au) should be irradiated for 30 minute, irradiation instrument and procedure related with the experiment for radiation safety. (author)

  18. Processing and physical utilisation of waste materials relevant to iron and steel manufacture; Aufarbeitung und stoffliche Nutzung eisen- und stahlrelevanter Abfallstoffe

    Energy Technology Data Exchange (ETDEWEB)

    Harp, G.; Schmidt, B.; Sucker, D. [Betriebsforschungsinstitut VDEh-Institut fuer Angewandte Forschung GmbH, Duesseldorf (Germany)

    1998-09-01

    A part of the waste materials arising in iron and steel manufacture is utilised physically, either internally for the recovery of iron or externally for the production of cement and nonferrous metals. Most of these materials can be used without prior processing. Iron and steel-relevant waste materials which at present are still landfilled or disposed of as hazardous wastes are not immediately suitable for physical recycling as secondary raw material. These waste materials have to be processed without exception before they can be used again in the existing steel and iron manufacturing plants. The results of the authors` own studies have clearly shown that the cupola furnace is suited for the use of a wide variety of waste materials. [Deutsch] Ein Teil der bei der Eisen- und Stahlerzeugung anfallenden Abfallstoffe werden entweder intern zur Rueckgewinnung des Eisens oder extern in der Zement- bzw. Nichteisenmetallgewinnung stofflich verwertet. Dabei handelt es sich ueberwiegend um Materialien, die ohne weitere Aufbereitung verwertbar sind. Die bislang noch deponierten oder als Sonderabfall entsorgten eisen- und stahlrelevanten Abfallstoffe sind ohne weiteres als Sekundaerrohstoff nicht stofflich verwertbar. Die Aufarbeitung dieser Abfallstoffe ist fuer den Wiedereinsatz in den vorhandenen Anlagen zur Gewinnung von Eisen und Stahl zwingend erforderlich. Die Ergebnisse der eigenen Untersuchungen haben klar gezeigt, dass der Kupolofen fuer die Nutzung einer grossen Vielfalt an Abfallstoffen geeignet ist. Zur Erhoehung der spezifischen Einsatzmenge an eisen- und stahlrelevanten Abfallstoffen untersuchen wir derzeit den Einsatz von oxidischen Materialien als sogenannte selbstgaengige Briketts zusammen mit den ueblichen Eisentraegern fuer die Erzeugung von fluessigem Giessereieisen. Selbstgaengig heisst hierbei, dass der Reduktionskohlenstoff und auch die notwendigen Legierungselemente insbesondere Silizium als SiC in den Briketts eingebunden werden. Fuer die Aufbereitung

  19. On-line adaptive battery impedance parameter and state estimation considering physical principles in reduced order equivalent circuit battery models part 2. Parameter and state estimation

    Science.gov (United States)

    Fleischer, Christian; Waag, Wladislaw; Heyn, Hans-Martin; Sauer, Dirk Uwe

    2014-09-01

    Lithium-ion battery systems employed in high power demanding systems such as electric vehicles require a sophisticated monitoring system to ensure safe and reliable operation. Three major states of the battery are of special interest and need to be constantly monitored. These include: battery state of charge (SoC), battery state of health (capacity fade determination, SoH), and state of function (power fade determination, SoF). The second paper concludes the series by presenting a multi-stage online parameter identification technique based on a weighted recursive least quadratic squares parameter estimator to determine the parameters of the proposed battery model from the first paper during operation. A novel mutation based algorithm is developed to determine the nonlinear current dependency of the charge-transfer resistance. The influence of diffusion is determined by an on-line identification technique and verified on several batteries at different operation conditions. This method guarantees a short response time and, together with its fully recursive structure, assures a long-term stable monitoring of the battery parameters. The relative dynamic voltage prediction error of the algorithm is reduced to 2%. The changes of parameters are used to determine the states of the battery. The algorithm is real-time capable and can be implemented on embedded systems.

  20. Hot HB Stars in Globular Clusters: Physical Parameters and Consequences for Theory. VI; The Second Parameter Pair M 3 and M 13

    Science.gov (United States)

    Moehler, S.; Landsman, W. B.; Sweigart, A. V.; Grundahl, F.

    2003-01-01

    We present the results of spectroscopic analyses of hot horizontal branch (HB) stars in M 13 and M 3, which form a famous "second parameter" pair. F rom the spectra and Stromgren photometry we derived - for the first time in M 13 - atmospheric parameters (effective temperature and surface gravity). For stars with Stromgren temperatures between 10,000 and 12,000 K we found excellent agreement between the atmospheric parameters derived from Stromgren photometry and those derived from Balmer line profile fits. However, for cooler stars there is a disagreement in the parameters derived by the two methods, for which we have no satisfactory explanation. Stars hotter than 12,000 K show evidence for helium depletion and iron enrichment, both in M 3 and M 13. Accounting for the iron enrichment substantially improves the agreement with canonical evolutionary models, although the derived gravities and masses are still somewhat too low. This remaining discrepancy may be an indication that scaled-solar metal-rich model atmospheres do not adequately represent the highly non-solar abundance ratios found in blue HB stars affected by diffusion. We discuss the effects of an enhancement in the envelope helium abundance on the atmospheric parameters of the blue HB stars, as might be caused by deep mixing on the red giant branch or primordial pollution from an earlier generation of intermediate mass asymptotic giant branch stars. Key words. Stars: atmospheres - Stars: evolution - Stars: horizontal branch - Globular clusters: individual: M 3 - Globular clusters: individual: M 13

  1. Masseter muscle tension, chewing ability, and selected parameters of physical fitness in elderly care home residents in Lodz, Poland

    Directory of Open Access Journals (Sweden)

    Gaszynska E

    2014-07-01

    Full Text Available Ewelina Gaszynska,1 Malgorzata Godala,2 Franciszek Szatko,1 Tomasz Gaszynski3 1Department of Hygiene and Health Promotion, Medical University of Lodz, Poland; 2Department of Nutrition and Epidemiology, Medical University of Lodz, Poland; 3Department of Emergency Medicine and Disaster Medicine, Medical University of Lodz, Poland Background: Maintaining good physical fitness and oral function in old age is an important element of good quality of life. Disability-related impairment of oral function contributes to a deterioration of the diet of older people and to the reduction of their social activity.Objectives: Investigate the association between masseter muscle tension, dental status, and physical fitness parameters.Materials and methods: Two hundred fifty-nine elderly care home residents (97 men, 162 women; mean age, 75.3±8.9 years were involved in this cross-sectional study. Their chewing ability was evaluated by masseter muscle tension palpation, differences of masseter muscle thickness, self-reported chewing ability, number of present and functional teeth, and number of posterior tooth pairs. Masseter muscle thickness was measured by ultrasonography. To assess physical fitness, hand grip strength and the timed up-and-go test were performed. Nutritional status was assessed using body mass index and body cell mass index (BCMI, calculated on the basis of electrical bioimpedance measurements. Medical records were used to collect information on systemic diseases and the number of prescribed medications. Subjects were also evaluated for their ability to perform ten activities of daily living.Results: Ninety-seven percent of the subjects suffered from systemic diseases. The three most prevalent illnesses were cardiac/circulatory 64.5%, musculoskeletal 37.3%, and endocrine/metabolic/nutritional 29.3%. Of the participants, 1.5% were underweight and more than one third (34.4% were overweight. Malnutrition (BCMI below normal was found in almost

  2. Non-Synonymous Single-Nucleotide Polymorphisms and Physical Activity Interactions on Adiposity Parameters in Malaysian Adolescents

    Directory of Open Access Journals (Sweden)

    Nur Lisa Zaharan

    2018-04-01

    Full Text Available BackgroundSeveral non-synonymous single-nucleotide polymorphisms (nsSNPs have been shown to be associated with obesity. Little is known about their associations and interactions with physical activity (PA in relation to adiposity parameters among adolescents in Malaysia.MethodsWe examined whether (a PA and (b selected nsSNPs are associated with adiposity parameters and whether PA interacts with these nsSNPs on these outcomes in adolescents from the Malaysian Health and Adolescents Longitudinal Research Team study (n = 1,151. Body mass indices, waist–hip ratio, and percentage body fat (% BF were obtained. PA was assessed using Physical Activity Questionnaire for Older Children (PAQ-C. Five nsSNPs were included: beta-3 adrenergic receptor (ADRB3 rs4994, FABP2 rs1799883, GHRL rs696217, MC3R rs3827103, and vitamin D receptor rs2228570, individually and as combined genetic risk score (GRS. Associations and interactions between nsSNPs and PAQ-C scores were examined using generalized linear model.ResultsPAQ-C scores were associated with % BF (β = −0.44 [95% confidence interval −0.72, −0.16], p = 0.002. The CC genotype of ADRB3 rs4994 (β = −0.16 [−0.28, −0.05], corrected p = 0.01 and AA genotype of MC3R rs3827103 (β = −0.06 [−0.12, −0.00], p = 0.02 were significantly associated with % BF compared to TT and GG genotypes, respectively. Significant interactions with PA were found between ADRB3 rs4994 (β = −0.05 [−0.10, −0.01], p = 0.02 and combined GRS (β = −0.03 [−0.04, −0.01], p = 0.01 for % BF.ConclusionHigher PA score was associated with reduced % BF in Malaysian adolescents. Of the nsSNPs, ADRB3 rs4994 and MC3R rs3827103 were associated with % BF. Significant interactions with PA were found for ADRB3 rs4994 and combined GRS on % BF but not on measurements of weight or circumferences. Targeting body fat represent prospects for molecular studies and lifestyle intervention

  3. Non-Synonymous Single-Nucleotide Polymorphisms and Physical Activity Interactions on Adiposity Parameters in Malaysian Adolescents.

    Science.gov (United States)

    Zaharan, Nur Lisa; Muhamad, Nor Hanisah; Jalaludin, Muhammad Yazid; Su, Tin Tin; Mohamed, Zahurin; Mohamed, M N A; A Majid, Hazreen

    2018-01-01

    Several non-synonymous single-nucleotide polymorphisms (nsSNPs) have been shown to be associated with obesity. Little is known about their associations and interactions with physical activity (PA) in relation to adiposity parameters among adolescents in Malaysia. We examined whether (a) PA and (b) selected nsSNPs are associated with adiposity parameters and whether PA interacts with these nsSNPs on these outcomes in adolescents from the Malaysian Health and Adolescents Longitudinal Research Team study ( n  = 1,151). Body mass indices, waist-hip ratio, and percentage body fat (% BF) were obtained. PA was assessed using Physical Activity Questionnaire for Older Children (PAQ-C). Five nsSNPs were included: beta-3 adrenergic receptor (ADRB3) rs4994, FABP2 rs1799883, GHRL rs696217, MC3R rs3827103, and vitamin D receptor rs2228570, individually and as combined genetic risk score (GRS). Associations and interactions between nsSNPs and PAQ-C scores were examined using generalized linear model. PAQ-C scores were associated with % BF (β = -0.44 [95% confidence interval -0.72, -0.16], p  = 0.002). The CC genotype of ADRB3 rs4994 (β = -0.16 [-0.28, -0.05], corrected p  = 0.01) and AA genotype of MC3R rs3827103 (β = -0.06 [-0.12, -0.00], p  = 0.02) were significantly associated with % BF compared to TT and GG genotypes, respectively. Significant interactions with PA were found between ADRB3 rs4994 (β = -0.05 [-0.10, -0.01], p  = 0.02) and combined GRS (β = -0.03 [-0.04, -0.01], p  = 0.01) for % BF. Higher PA score was associated with reduced % BF in Malaysian adolescents. Of the nsSNPs, ADRB3 rs4994 and MC3R rs3827103 were associated with % BF. Significant interactions with PA were found for ADRB3 rs4994 and combined GRS on % BF but not on measurements of weight or circumferences. Targeting body fat represent prospects for molecular studies and lifestyle intervention in this population.

  4. Chemical and physical reservoir parameters at initial conditions in Berlin geothermal field, El Salvador: a first assessment

    Energy Technology Data Exchange (ETDEWEB)

    D`Amore, F. [CNR, Pisa (Italy). International Institute for Geothermal Research ; Mejia, J.T. [Comision Ejuctiva Hidroelectrica del Rio Lempa, El Salvador (El Salvador)

    1999-02-01

    A study has been made to obtain the main chemical and physical reservoir conditions of the Berlin field (El Salvador), before the commencement of large-scale exploitation of the geothermal resource. The upflow zone and the main flow path within the geothermal system have been determined from the area distribution of chemical parameters such as Cl concentrations, ratios such as Na/K, K/Mg, K/Ca, and temperatures computed from silica concentrations and cation ratios. Gas compositions have been used to calculate reservoir parameters such as temperature, steam fraction and P{sub CO{sub 2}}. The computer code WATCH (new edition 1994) has been used to evaluate the temperature of equilibrium between the aqueous species and selected alteration minerals in the reservoir. The fluid in Berlin flows to the exploited reservoir from the south, entering it in the vicinity of well TR-5. Along its flow-path (south-north direction), the fluid is cooled by boiling and conductive cooling. The chloride-enthalpy diagram indicates the existence of a parent water, with a chemical composition similar to well TR-5, that boils and the residual brine produces the fluid of well TR-3, which is very concentrated in salts. The fluid of TR-5 is probably produced from this parent water, generating the fluids of wells TR-2 and TR-9 by boiling, and the fluids of wells TR-1 and TR-4 by conductive cooling. The computed values for the deep steam fraction clearly indicate that this is a liquid-dominated system, with computed temperature values decreasing from 310{sup o}C (upflow zone) to about 230{sup o}C, from south to north. (author)

  5. Physiological, physical and behavioural changes in dogs (Canis familiaris) when kennelled: testing the validity of stress parameters.

    Science.gov (United States)

    Part, C E; Kiddie, J L; Hayes, W A; Mills, D S; Neville, R F; Morton, D B; Collins, L M

    2014-06-22

    Domestic dogs (Canis familiaris) housed in kennelling establishments are considered at risk of suffering poor welfare. Previous research supporting this hypothesis has typically used cortisol:creatinine ratios (C/Cr) to measure acute and chronic stress in kennelled dogs. However, the value of C/Cr as a welfare indicator has been questioned. This study aimed to test the validity of a range of physiological, physical and behavioural welfare indicators and to establish baseline values reflecting good dog welfare. Measurements were taken from 29 privately-owned dogs (14 males, 15 females), ranging in age and breed, in their own home and in a boarding kennel environment, following a within-subjects, counterbalanced design. Pairwise comparisons revealed that C/Cr and vanillylmandelic acid:creatinine ratios (VMA/Cr) were higher in the kennel than home environment (P=0.003; P=0.01, respectively) and were not associated with differences in movement/exercise between environments. Dogs' surface temperature was lower in kennels (P=0.001) and was not associated with ambient temperature. No association with age, or effects of kennel establishment, kennelling experience, sex or source were found. Dogs were generally more active in kennels, but showed considerable individual variability. C/Cr and 5-HIAA:creatinine ratios (5-HIAA/Cr) were negatively correlated with lip licking in kennels. Baseline values for each parameter are presented. The emotional valence of responses was ambiguous and no definitive evidence was found to suggest that dogs were negatively stressed by kennelling. It was concluded that C/Cr and, particularly, VMA/Cr and surface temperature provide robust indicators of psychological arousal in dogs, while spontaneous behaviour might be better used to facilitate interpretation of physiological and physical data on an individual level. Copyright © 2014 Elsevier Inc. All rights reserved.

  6. Sensitivity of physics parameters for establishment of a burned CANDU full-core model for decommissioning waste characterization

    International Nuclear Information System (INIS)

    Cho, Dong-Keun; Sun, Gwang-Min; Choi, Jongwon; Hwang, Dong-Hyun; Hwang, Tae-Won; Yang, Ho-Yeon; Park, Dong-Hwan

    2011-01-01

    The sensitivity of parameters related with reactor physics on the source terms of decommissioning wastes from a CANDU reactor was investigated in order to find a viable, simplified burned core model of a Monte Carlo simulation for decommissioning waste characterization. First, a sensitivity study was performed for the level of nuclide consideration in an irradiated fuel and implicit geometry modeling, the effects of side structural components of the core, and structural supporters for reactive devices. The overall effects for computation memory, calculation time, and accuracy were then investigated with a full-core model. From the results, it was revealed that the level of nuclide consideration and geometry homogenization are not important factors when the ratio of macroscopic neutron absorption cross section (MNAC) relative to a total value exceeded 0.95. The most important factor affecting the neutron flux of the pressure tube was shown to be the structural supporters for reactivity devices, showing an 10% difference. Finally, it was concluded that a bundle-average homogeneous model considering a MNAC of 0.95, which is the simplest model in this study, could be a viable approximate model, with about 25% lower computation memory, 40% faster simulation time, and reasonable engineering accuracy compared with a model with an explicit geometry employing an MNAC of 0.99. (author)

  7. Validity of a scale of neighbourhood informal social control relevant to pre-schoolers’ physical activity: A cross-sectional study

    Directory of Open Access Journals (Sweden)

    Ester Cerin

    2017-12-01

    Full Text Available Childhood physical activity (PA is important for health across the lifespan. Time pre-schoolers spend outdoors, which has been associated with more PA, is likely influenced by parents’ perception of neighbourhood informal social control relevant to pre-schoolers' PA, defined as the willingness of neighbours to intervene to ensure social order and a safe community environment for young children's active play. To advance measurement of this construct, we assessed factorial and construct validities of the PA-related neighbourhood informal social control scale for parents of pre-schoolers (PANISC-PP. In 2013–2014, Hong Kong primary caregivers (n=394 of 3–5 year-old children completed a socio-demographic questionnaire, the preliminary version of the PANISC-PP, and self-report measures of theoretical neighbourhood correlates of PA-related neighbourhood informal social control (perceived signs of physical and social disorder, community cohesion, perceived stranger danger, risk of unintentional injury and traffic safety. The fit of the data to an a priori measurement model of the PANISC-PP was examined using confirmatory factor analyses. As the a priori model showed inadequate fit to the data, the factor structure was re-specified based on theoretical considerations. The final measurement models of the PANISC-PP showed acceptable fit to the data and consisted of three correlated latent factors: “General informal supervision”, “Civic engagement for the creation of a better neighbourhood environment” and “Educating and assisting neighbourhood children”. The internal reliability of the subscales was good (Cronbach's α values 0.82–0.89. Generalised additive mixed models indicated that all subscales were positively associated with community cohesion and scores on the subscale “Educating and assisting neighbourhood children” were related in the expected direction to all indicators of traffic and personal safety, supporting construct

  8. Hot HB Stars in Globular Clusters - Physical Parameters and Consequences for Theory. VI. The Second Parameter Pair M3 and M13

    Science.gov (United States)

    Moehler, S.; Landsman, W. B.; Sweigart, A. V.; Grundahl, F.

    2002-01-01

    We present the results of spectroscopic analyses of hot horizontal branch (HB) stars in M13 and M3, which form a famous second parameter pair. From the spectra we derived - for the first time in M13 - atmospheric parameters (effective temperature and surface gravity) as well as abundances of helium, magnesium, and iron. Consistent with analyses of hot HB stars in other globular clusters we find evidence for helium depletion and iron enrichment in stars hotter than about 12,000 K in both M3 and M13. Accounting for the iron enrichment substantially improves the agreement with canonical evolutionary models, although the derived gravities and masses are still somewhat too low. This remaining discrepancy may be an indication that scaled-solar metal-rich model atmospheres do not adequately represent the highly non-solar abundance ratios found in blue HB stars with radiative levitation. We discuss the effects of an enhancement in the envelope helium abundance on the atmospheric parameters of the blue HB stars, as might be caused by deep mixing on the red giant branch or primordial pollution from an earlier generation of intermediate mass asymptotic giant branch stars.

  9. Application of regional physically-based landslide early warning model: tuning of the input parameters and validation of the results

    Science.gov (United States)

    D'Ambrosio, Michele; Tofani, Veronica; Rossi, Guglielmo; Salvatici, Teresa; Tacconi Stefanelli, Carlo; Rosi, Ascanio; Benedetta Masi, Elena; Pazzi, Veronica; Vannocci, Pietro; Catani, Filippo; Casagli, Nicola

    2017-04-01

    The Aosta Valley region is located in North-West Alpine mountain chain. The geomorphology of the region is characterized by steep slopes, high climatic and altitude (ranging from 400 m a.s.l of Dora Baltea's river floodplain to 4810 m a.s.l. of Mont Blanc) variability. In the study area (zone B), located in Eastern part of Aosta Valley, heavy rainfall of about 800-900 mm per year is the main landslides trigger. These features lead to a high hydrogeological risk in all territory, as mass movements interest the 70% of the municipality areas (mainly shallow rapid landslides and rock falls). An in-depth study of the geotechnical and hydrological properties of hillslopes controlling shallow landslides formation was conducted, with the aim to improve the reliability of deterministic model, named HIRESS (HIgh REsolution Stability Simulator). In particular, two campaigns of on site measurements and laboratory experiments were performed. The data obtained have been studied in order to assess the relationships existing among the different parameters and the bedrock lithology. The analyzed soils in 12 survey points are mainly composed of sand and gravel, with highly variable contents of silt. The range of effective internal friction angle (from 25.6° to 34.3°) and effective cohesion (from 0 kPa to 9.3 kPa) measured and the median ks (10E-6 m/s) value are consistent with the average grain sizes (gravelly sand). The data collected contributes to generate input map of parameters for HIRESS (static data). More static data are: volume weight, residual water content, porosity and grain size index. In order to improve the original formulation of the model, the contribution of the root cohesion has been also taken into account based on the vegetation map and literature values. HIRESS is a physically based distributed slope stability simulator for analyzing shallow landslide triggering conditions in real time and in large areas using parallel computational techniques. The software

  10. Walkability parameters, active transportation and objective physical activity: moderating and mediating effects of motor vehicle ownership in a cross-sectional study

    Science.gov (United States)

    2012-01-01

    Background Neighborhood walkability has been associated with physical activity in several studies. However, as environmental correlates of physical activity may be context specific, walkability parameters need to be investigated separately in various countries and contexts. Furthermore, the mechanisms by which walkability affects physical activity have been less investigated. Based on previous research, we hypothesized that vehicle ownership is a potential mediator. We investigated the associations between walkability parameters and physical activity, and the mediating and moderating effects of vehicle ownership on these associations in a large sample of Swedish adults. Methods Residential density, street connectivity and land use mix were assessed within polygon-based network buffers (using Geographic Information Systems) for 2,178 men and women. Time spent in moderate to vigorous physical activity was assessed by accelerometers, and walking and cycling for transportation were assessed by the International Physical Activity Questionnaire. Associations were examined by linear regression and adjusted for socio-demographic characteristics. The product of coefficients approach was used to investigate the mediating effect of vehicle ownership. Results Residential density and land use mix, but not street connectivity, were significantly associated with time spent in moderate to vigorous physical activity and walking for transportation. Cycling for transportation was not associated with any of the walkability parameters. Vehicle ownership mediated a significant proportion of the association between the walkability parameters and physical activity outcomes. For residential density, vehicle ownership mediated 25% of the association with moderate to vigorous physical activity and 20% of the association with the amount of walking for transportation. For land use mix, the corresponding proportions were 34% and 14%. Vehicle ownership did not moderate any of the associations

  11. Determination of the physical parameters of the nuclear subcritical assembly Chicago 9000 of the IPN using the Serpent code

    International Nuclear Information System (INIS)

    Arriaga R, L.; Del Valle G, E.; Gomez T, A. M.

    2013-10-01

    For the Serpent code was developed the three-dimensional model corresponding to the nuclear subcritical assembly (S A) Chicago 9000 of the Escuela Superior de Fisica y Matematicas del Instituto Politecnico Nacional (ESFM-IPN). The model includes: a) the core, formed by 312 aluminum pipes that contain 5 nuclear fuel rods (natural uranium in metallic form), b) the multi-perforated plates where they penetrate the inferior part of each pipe to be able to remain in vertical form, c) water, acting as moderator and reflector, and d) the recipient lodging to the core. The pipes arrangement is hexagonal although the transversal section of the recipient that lodges to the core is circular. The entrance file for the Serpent code was generated with the data provided by the manual of the S A use about the composition and density of the fuel rods and others obtained in direct form of the rods, as the interior and external diameter, mass and height. Of the obtained physical parameters, those more approached to that reported in the manual of the subcritical assembly are the effective multiplication factor and the reproduction factor η. The differences can be because the description of the fuel rods provided by the manual of the S A use do not correspond those that are physically in the S A core. This difference consists on the presence of a circular central channel of 1.245 diameter centimeters in each fuel rod. The fuel rods reported in the mentioned manual do not have that channel. Although the obtained results are encouraging, we want to continue improving the model to incorporate in this the detectors, defined this way by the Serpent code, which could determine the existent neutrons flux in diverse points of interest like the axial or radial aligned points and to compare these with those that are obtained in an experimental way when a generating neutrons source (Pu-Be) is introduced. Added to this effort the cross sections for each unitary cell will be determined, so that

  12. The Evolution and Physical Parameters of WN3/O3s: A New Type of Wolf–Rayet Star

    Energy Technology Data Exchange (ETDEWEB)

    Neugent, Kathryn F.; Massey, Philip [Lowell Observatory, 1400 W Mars Hill Road, Flagstaff, AZ 86001 (United States); Hillier, D. John [Department of Physics and Astronomy, University of Pittsburgh, Pittsburgh, PA 15260 (United States); Morrell, Nidia, E-mail: kneugent@lowell.edu, E-mail: phil.massey@lowell.edu, E-mail: hillier@pitt.edu, E-mail: nmorrell@lco.cl [Las Campanas Observatory, Carnegie Observatories, Casilla 601, La Serena (Chile)

    2017-05-20

    As part of a search for Wolf–Rayet (WR) stars in the Magellanic Clouds, we have discovered a new type of WR star in the Large Magellanic Cloud (LMC). These stars have both strong emission lines, as well as He ii and Balmer absorption lines and spectroscopically resemble a WN3 and O3V binary pair. However, they are visually too faint to be WN3+O3V binary systems. We have found nine of these WN3/O3s, making up ∼6% of the population of LMC WRs. Using cmfgen, we have successfully modeled their spectra as single stars and have compared the physical parameters with those of more typical LMC WNs. Their temperatures are around 100,000 K, a bit hotter than the majority of WN stars (by around 10,000 K), though a few hotter WNs are known. The abundances are what you would expect for CNO equilibrium. However, most anomalous are their mass-loss rates, which are more like that of an O-type star than a WN star. While their evolutionary status is uncertain, their low mass-loss rates and wind velocities suggest that they are not products of homogeneous evolution. It is possible instead that these stars represent an intermediate stage between O stars and WNs. Since WN3/O3 stars are unknown in the Milky Way, we suspect that their formation depends upon metallicity, and we are investigating this further by a deep survey in M33, which possesses a metallicity gradient.

  13. SU-G-TeP4-09: Development of a Plan Data Aggregator for Time Efficient Physics Second-Checks of Machine Parameters for External Beam Treatment Plans

    Energy Technology Data Exchange (ETDEWEB)

    Belley, M; Schmidt, M; Knutson, N [Rhode Island Hospital, Providence RI (United States); University of Rhode Island, Kingston, RI (United States); Price, M [Rhode Island Hospital, Providence RI (United States); University of Rhode Island, Kingston, RI (United States); Alpert Medical School of Brown University, Providence, RI (United States)

    2016-06-15

    Purpose: Physics second-checks for external beam radiation therapy are performed, in-part, to verify that the machine parameters in the Record-and-Verify (R&V) system that will ultimately be sent to the LINAC exactly match the values initially calculated by the Treatment Planning System (TPS). While performing the second-check, a large portion of the physicists’ time is spent navigating and arranging display windows to locate and compare the relevant numerical values (MLC position, collimator rotation, field size, MU, etc.). Here, we describe the development of a software tool that guides the physicist by aggregating and succinctly displaying machine parameter data relevant to the physics second-check process. Methods: A data retrieval software tool was developed using Python to aggregate data and generate a list of machine parameters that are commonly verified during the physics second-check process. This software tool imported values from (i) the TPS RT Plan DICOM file and (ii) the MOSAIQ (R&V) Structured Query Language (SQL) database. The machine parameters aggregated for this study included: MLC positions, X&Y jaw positions, collimator rotation, gantry rotation, MU, dose rate, wedges and accessories, cumulative dose, energy, machine name, couch angle, and more. Results: A GUI interface was developed to generate a side-by-side display of the aggregated machine parameter values for each field, and presented to the physicist for direct visual comparison. This software tool was tested for 3D conformal, static IMRT, sliding window IMRT, and VMAT treatment plans. Conclusion: This software tool facilitated the data collection process needed in order for the physicist to conduct a second-check, thus yielding an optimized second-check workflow that was both more user friendly and time-efficient. Utilizing this software tool, the physicist was able to spend less time searching through the TPS PDF plan document and the R&V system and focus the second-check efforts on

  14. The influence of systematic pulse-limited physical exercise on the parameters of the cardiovascular system in patients over 65 years of age.

    Science.gov (United States)

    Chomiuk, Tomasz; Folga, Andrzej; Mamcarz, Artur

    2013-04-20

    The influence of physical exercise on the parameters of the cardiovascular system of elderly persons has not been sufficiently investigated yet. The aim of the study was to assess the influence of regular 6-week physical exercise using the Nordic walking (NW) method in a group of elderly persons on their physical performance and regulation of selected parameters assessing the cardiovascular system. Fifty patients over 65 years of age participated in the study. The study encompassed: medical interview, physical examination, resting ECG, spiroergometry examination, 6MWT (6-minute walk test) and 24-hour ambulatory blood pressure monitoring (ABPM). During the exercise programme, the pulse was monitored using pulsometers. After the completion of the training, check-up tests assessing the same parameters were performed. The control group consisted of 18 persons over 65 years of age with similar cardiovascular problems. In the test group, duration of the physical effort increased by 1.02 min (p = 0.0001), the maximum load increased by 10.68 W (p = 0.0001), values of VO2max by 2.10 (p = 0.0218), distance improved in 6MWT by 75.04 m (p = 0.00001), systolic blood pressure decreased by 5.50 mm Hg (p = 0.035) and diastolic blood pressure by 3.50 mm Hg (p = 0.054) as compared to the control group. Systematic NW physical exercise limited by the pulse had a beneficial effect on the physical performance of elderly persons as assessed with main parameters. A short 6-week programme of endurance exercises had a hypotensive effect in elderly persons over 65 years of age.

  15. Spatial and temporal characterization of some water quality physical parameters and their relationships with land-use in Água Fria watershed (Palmas – TO, Brazil

    Directory of Open Access Journals (Sweden)

    Harry Edmar Schulz

    2007-06-01

    Full Text Available Due to a high population growth that has been occurring in Palmas and due to land use changes that are caused by this population growth and development, the goal of this paper was to study the behavior of four physical parameters of water quality of the Água Fria watershed. The parameters were turbidity, total suspended solids, settleable solids and total dissolved solids. Eight gauging stations were established and the water samples were monthly collected from February/1998 to February/1999. The water bodies of the watershed were generally in good condition concerning these four parameters. However, there were some cases of seasonal irregularity of some parameters, as well as no correlation among some of studied parameters. This might be an indicator of some impacts like accelerated erosion due to a misuse of the lands and misuse of local water resources.

  16. Towards a generic procedure for the detection of relevant contaminants from waste electric and electronic equipment (WEEE) in plastic food-contact materials: a review and selection of key parameters.

    Science.gov (United States)

    Puype, Franky; Samsonek, Jiří; Vilímková, Věra; Kopečková, Šárka; Ratiborská, Andrea; Knoop, Jan; Egelkraut-Holtus, Marion; Ortlieb, Markus; Oppermann, Uwe

    2017-10-01

    Recently, traces of brominated flame retardants (BFRs) have been detected in black plastic food-contact materials (FCMs), indicating the presence of recycled plastics, mainly coming from waste electric and electronic equipment (WEEE) as BFRs are one of the main additives in electric applications. In order to evaluate efficiently and preliminary in situ the presence of WEEE in plastic FCMs, a generic procedure for the evaluation of WEEE presence in plastic FCMs by using defined parameters having each an associated importance level has been proposed. This can be achieved by combining parameters like overall bromine (Br) and antimony (Sb) content; additive and reactive BFR, rare earth element (REE) and WEEE-relevant elemental content and additionally polymer purity. In most of the cases, the WEEE contamination could be confirmed by combining X-ray fluorescence (XRF) spectrometry and thermal desorption/pyrolysis gas chromatography-mass spectrometry (GC-MS) at first. The Sb and REE content did not give a full confirmation as to the source of contamination, however for Sb the opposite counts: Sb was joined with elevated Br signals. Therefore, Br at first followed by Sb were used as WEEE precursors as both elements are used as synergetic flame-retardant systems. WEEE-specific REEs could be used for small WEEE (sWEEE) confirmation; however, this parameter should be interpreted with care. The polymer purity by Fourier-transform infrared spectrometer (FTIR) and pyrolysis GC-MS in many cases could not confirm WEEE-specific contamination; however, it can be used for purity measurements and for the suspicion of the usage of recycled fractions (WEEE and non-WEEE) as a third-line confirmation. To the best of our knowledge, the addition of WEEE waste to plastic FCMs is illegal; however, due to lack on screening mechanisms, there is still the breakthrough of such articles onto the market, and, therefore, our generic procedure enables the quick and effective screening of suspicious

  17. Effect of various physical parameters on surface and build-up dose for 15-MV X-rays

    International Nuclear Information System (INIS)

    Yadav, Girigesh; Yadav, R.S.; Kumar, Alok

    2010-01-01

    The purpose of this study was to find out the effect of various physical parameters on the skin and build-up doses of 15-MV photon beams. The effects of field dimensions, acrylic shadow tray, focus to-skin distance (FSD) on surface and buildup dose were determined for open, motorized 60 deg wedge (MW) and blocked fields. A 'Markus' plane parallel plate chamber was used for these measurements in an Elekta (6-15MV) linear accelerator. The surface dose for MW fields was lower than the dose for an open field, but the trend reversed for large fields and higher degree wedges. With the use of an acrylic shadow tray, the surface dose increased for all field sizes, but the increase was dominant for large fields. The surface dose for blocked fields was lower than the dose for open fields. The percentage depth dose of 10 x 10 cm 2 field at surface (PDD 0 ) for open beam were 13.89%, 11.71%, and 10.74% at 80 cm, 100 cm, and 120 cm FSD, respectively. The blocking tray increased PDD 0 of 10 x 10 cm 2 field to 26.29%, 14.01%, and 11.53%, while the motorized 60 deg wedge decreased PDD 0 to 11.32%, 9.7%, and 8.9 % at these FSDs. The maximum PDD difference seen at surface (i.e. skin) for 5x5 cm 2 , 15x15 cm 2 , and 30x30 cm 2 are 0.5%, 4.6%, and 5.6% for open field and 0.9%, 4.7%, and 7.2% for motorized 60 deg wedge field, when FSDs varied from 80 cm to 120 cm. The maximum PDD difference seen at surface for 5x5 cm 2 , 15x15 cm 2 , and 30x30 cm 2 fields are 5.6%, 22.8%, and 29.6%, respectively, for a 1.0-cm perspex-blocking tray as the FSD is changed. The maximum PDD difference was seen at the surface (i.e. skin) and this decreased with increasing depth. (author)

  18. The determination of solubility parameters of solvents and polymers by means of correlations with other physical quantities

    NARCIS (Netherlands)

    Koenhen, D.M.; Smolders, C.A.

    1975-01-01

    Correlations of solvent solubility parameters with molar attraction constants and with properties like surface tension, dipole moment, and index of refraction have been explored. From relations found to be valid for solvents, it is possible to calculate the solubility parameters for polymers. A

  19. Development of a dual-energy computed tomography quality control program: Characterization of scanner response and definition of relevant parameters for a fast-kVp switching dual-energy computed tomography system.

    Science.gov (United States)

    Nute, Jessica L; Jacobsen, Megan C; Stefan, Wolfgang; Wei, Wei; Cody, Dianna D

    2018-04-01

    A prototype QC phantom system and analysis process were developed to characterize the spectral capabilities of a fast kV-switching dual-energy computed tomography (DECT) scanner. This work addresses the current lack of quantitative oversight for this technology, with the goal of identifying relevant scan parameters and test metrics instrumental to the development of a dual-energy quality control (DEQC). A prototype elliptical phantom (effective diameter: 35 cm) was designed with multiple material inserts for DECT imaging. Inserts included tissue equivalent and material rods (including iodine and calcium at varying concentrations). The phantom was scanned on a fast kV-switching DECT system using 16 dual-energy acquisitions (CTDIvol range: 10.3-62 mGy) with varying pitch, rotation time, and tube current. The circular head phantom (22 cm diameter) was scanned using a similar protocol (12 acquisitions; CTDIvol range: 36.7-132.6 mGy). All acquisitions were reconstructed at 50, 70, 110, and 140 keV and using a water-iodine material basis pair. The images were evaluated for iodine quantification accuracy, stability of monoenergetic reconstruction CT number, noise, and positional constancy. Variance component analysis was used to identify technique parameters that drove deviations in test metrics. Variances were compared to thresholds derived from manufacturer tolerances to determine technique parameters that had a nominally significant effect on test metrics. Iodine quantification error was largely unaffected by any of the technique parameters investigated. Monoenergetic HU stability was found to be affected by mAs, with a threshold under which spectral separation was unsuccessful, diminishing the utility of DECT imaging. Noise was found to be affected by CTDIvol in the DEQC body phantom, and CTDIvol and mA in the DEQC head phantom. Positional constancy was found to be affected by mAs in the DEQC body phantom and mA in the DEQC head phantom. A streamlined scan protocol

  20. PHYSICS

    CERN Multimedia

    P. Sphicas

    There have been three physics meetings since the last CMS week: “physics days” on March 27-29, the Physics/ Trigger week on April 23-27 and the most recent physics days on May 22-24. The main purpose of the March physics days was to finalize the list of “2007 analyses”, i.e. the few topics that the physics groups will concentrate on for the rest of this calendar year. The idea is to carry out a full physics exercise, with CMSSW, for select physics channels which test key features of the physics objects, or represent potential “day 1” physics topics that need to be addressed in advance. The list of these analyses was indeed completed and presented in the plenary meetings. As always, a significant amount of time was also spent in reviewing the status of the physics objects (reconstruction) as well as their usage in the High-Level Trigger (HLT). The major event of the past three months was the first “Physics/Trigger week” in Apri...

  1. A systematic review of web-based interventions for patient empowerment and physical activity in chronic diseases: relevance for cancer survivors

    NARCIS (Netherlands)

    Kuijpers, W.; Groen, W.G.; Aaronson, N.K.; van Harten, W.H.

    2013-01-01

    Background: Patient empowerment reflects the ability of patients to positively influence their health and health behavior such as physical activity. While interactive Web-based interventions are increasingly used in various chronic disease settings to enhance empowerment and physical activity, such

  2. A Systematic Review of Web-Based Interventions for Patient Empowerment and Physical Activity in Chronic Diseases : Relevance for Cancer Survivors

    NARCIS (Netherlands)

    Kuijpers, W.; Groen, W.G.; Aaronson, N.K.; van Harten, Willem H.

    2013-01-01

    Background: Patient empowerment reflects the ability of patients to positively influence their health and health behavior such as physical activity. While interactive Web-based interventions are increasingly used in various chronic disease settings to enhance empowerment and physical activity, such

  3. Perfection of educational-training process on the basis of account of parameters special physical preparedness of rugby-players

    Directory of Open Access Journals (Sweden)

    V.V. Pasko

    2014-06-01

    Full Text Available Purpose: to investigate the special physical fitness rugby, who were engaged in the experimental procedure. The technique is based on the application of the developed relations training load. Material : the study involved 60 athletes aged 16-18 years. Results : the program presents the main provisions of special physical preparation of athletes in the preparatory period of training macrocycle. Value for training work on special physical preparation as follows: September - the main emphasis is placed on special endurance and was 100 % of the training time; October - special endurance - 70%, strength endurance - 20% power capacity - 10%; November - respectively 50, 30, 20 %, December - 30, 40, 30 %. Conclusions : the proposed construction of a pilot version of training is more effective than traditional. It allows rational selection of training load. Also contributing to the priority development of physical qualities, gaming specialization athletes.

  4. IS THERE REALLY A NEED TO CREATE «REGIONAL PERCENTILE CURVES» OF WEIGHT-HEIGHT PARAMETERS? (COMMENT TO THE ARTICLE BY RITA R. KILDIYAROVA «ASSESSING PHYSICAL DEVELOPMENT OF CHILDREN WITH PERCENTILE DIAGRAMS»

    Directory of Open Access Journals (Sweden)

    Svetlana G. Makarova

    2017-01-01

    Full Text Available Height, body weight and body mass index are important parameters of health and are widely used in clinical practice, for assessing health of children, and for population studies. Amid the general globalization, the main trend of the present time is joining efforts of various countries for prevention and treatment of diseases in children. The work of the World Health Organization (WHO on creation of international standards of anthropometric measures and parameters of children's development is based upon this trend. A key point of the WHO standards is their creation based on a survey of a large cohort of children (from 5 countries of 6 continents who were in optimal conditions: who were breast-fed and received the up-to-date level of care and quality of the provided medical care. This actually allowed to eliminate the main exogenous factors that affect such parameters and to make them, in fact, the reference ones. The application of a unified approach using the WHO standards allows to carry out multicenter studies involving different countries as well as to compare the data obtained in different regions. Studies have shown that the WHO standards for physical development are applicable in different regions of the world. In this regard, the creation of «regional» reference curves for height and body weight of children that are different from the generally accepted standards is currently inappropriate, but it is really relevant to use the WHO standards. 

  5. Tension-free vaginal tape versus lata fascia sling: The importance of transvulvar ultrasound in the assessment of relevant anatomical parameters in treatment of women with stress urinary incontinence

    Directory of Open Access Journals (Sweden)

    Frederico Teixeira Brandt

    2009-01-01

    Full Text Available Objective: To describe the relevance of transvulvar ultrasound in the assessment of anatomical differences induced by the lata fascia sling (LFS and tension-free vaginal tape (TVT procedures. Materials and Methods: Forty women with stress urinary incontinence (SUI, aged 30 to 60 years, have been treated with either LFS (20 patients or TVT (20 patients. The transvulvar ultrasound of the urethrovesical junction (UVJ and proximal urethra (PU has been used as the main investigational tool both pre- and post-operatively. The studied parameters were the vertical (VUVJD and horizontal (HUVJD UVJ distances, the pubourethral distance (PUD and the PU length. Results: The VUVJD did not vary significantly after the LFS surgery (P=0.10. The PUD became shorter (P=0.001 and the HUVJD became shorter only at rest (P=0.03 after the correction by LFS. The TVT procedure has led to shortening of the VUVJ displacement (P=0.0005 and of the PU length (P=0.02. Conclusions: The transvulvar ultrasound was of utmost importance in the demonstration that both the LFS and TVT surgical procedures elongate the PU, even though the LFS technique does it more efficiently. The LFS technique focus more on shortening the PUD and the TVT procedure focus more on the correction of the vertical UVJ displacement.

  6. Quality assessment and artificial neural networks modeling for characterization of chemical and physical parameters of potable water.

    Science.gov (United States)

    Salari, Marjan; Salami Shahid, Esmaeel; Afzali, Seied Hosein; Ehteshami, Majid; Conti, Gea Oliveri; Derakhshan, Zahra; Sheibani, Solmaz Nikbakht

    2018-04-22

    Today, due to the increase in the population, the growth of industry and the variety of chemical compounds, the quality of drinking water has decreased. Five important river water quality properties such as: dissolved oxygen (DO), total dissolved solids (TDS), total hardness (TH), alkalinity (ALK) and turbidity (TU) were estimated by parameters such as: electric conductivity (EC), temperature (T), and pH that could be measured easily with almost no costs. Simulate water quality parameters were examined with two methods of modeling include mathematical and Artificial Neural Networks (ANN). Mathematical methods are based on polynomial fitting with least square method and ANN modeling algorithms are feed-forward networks. All conditions/circumstances covered by neural network modeling were tested for all parameters in this study, except for Alkalinity. All optimum ANN models developed to simulate water quality parameters had precision value as R-value close to 0.99. The ANN model extended to simulate alkalinity with R-value equals to 0.82. Moreover, Surface fitting techniques were used to refine data sets. Presented models and equations are reliable/useable tools for studying water quality parameters at similar rivers, as a proper replacement for traditional water quality measuring equipment's. Copyright © 2018 Elsevier Ltd. All rights reserved.

  7. Relevance of physical fitness levels and exercise-related beliefs for self-reported and experimental pain in fibromyalgia: an explorative study.

    Science.gov (United States)

    de Bruijn, Saskia T; van Wijck, Albert J M; Geenen, Rinie; Snijders, Tom J; van der Meulen, Wout J T M; Jacobs, Johannes W G; Veldhuijzen, Dieuwke Swaantje

    2011-09-01

    It has been suggested that low physical fitness is a contributor to pain in fibromyalgia and that exercise-related beliefs play a role in the persistence of this association. Yet the association between physical fitness and pain is hardly explored in detail. The aim of this exploratory study in patients with fibromyalgia was to investigate the association of physical fitness levels with self-reported and experimental pain as well as with pain catastrophizing and activity-avoidance beliefs. Physical fitness of 18 patients with fibromyalgia was examined using maximal ergocycling and the 6-minute walking test (6MWT). Pain intensity was assessed using self-report scales and quantitative sensory testing. A reduced walking distance on the 6MWT was correlated with more severe self-reported pain on the Fibromyalgia Impact Questionnaire (r = -0.52, P physically fit and experienced more severe pain. The results demonstrate some associations between physical fitness and pain in fibromyalgia and point to the importance of activity avoidance. Although the causal directionality of the associations needs substantiation in clinical research, the findings support the notion that low fitness and activity-avoidance beliefs should be targeted while treating pain in fibromyalgia.

  8. PHYSICS

    CERN Multimedia

    D. Acosta

    2010-01-01

    A remarkable amount of progress has been made in Physics since the last CMS Week in June given the exponential growth in the delivered LHC luminosity. The first major milestone was the delivery of a variety of results to the ICHEP international conference held in Paris this July. For this conference, CMS prepared 15 Physics Analysis Summaries on physics objects and 22 Summaries on new and interesting physics measurements that exploited the luminosity recorded by the CMS detector. The challenge was incorporating the largest batch of luminosity that was delivered only days before the conference (300 nb-1 total). The physics covered from this initial running period spanned hadron production measurements, jet production and properties, electroweak vector boson production, and even glimpses of the top quark. Since then, the accumulated integrated luminosity has increased by a factor of more than 100, and all groups have been working tremendously hard on analysing this dataset. The September Physics Week was held ...

  9. Effect of high wavelengths low intensity light during dark period on physical exercise performance, biochemical and haematological parameters of swimming rats.

    Science.gov (United States)

    Beck, W; Gobatto, C

    2016-03-01

    Nocturnal rodents should be assessed at an appropriate time of day, which leads to a challenge in identifying an adequate environmental light which allows animal visualisation without perturbing physiological homeostasis. Thus, we analysed the influence of high wavelength and low intensity light during dark period on physical exercise and biochemical and haematological parameters of nocturnal rats. We submitted 80 animals to an exhaustive exercise at individualised intensity under two different illuminations during dark period. Red light (> 600 nm; sports performance experiments.

  10. PHYSICS

    CERN Multimedia

    J. Incandela

    There have been numerous developments in the physics area since the September CMS week. The biggest single event was the Physics/Trigger week in the end of Octo¬ber, whereas in terms of ongoing activities the “2007 analyses” went into high gear. This was in parallel with participation in CSA07 by the physics groups. On the or¬ganizational side, the new conveners of the physics groups have been selected, and a new database for man¬aging physics analyses has been deployed. Physics/Trigger week The second Physics-Trigger week of 2007 took place during the week of October 22-26. The first half of the week was dedicated to working group meetings. The ple¬nary Joint Physics-Trigger meeting took place on Wednesday afternoon and focused on the activities of the new Trigger Studies Group (TSG) and trigger monitoring. Both the Physics and Trigger organizations are now focused on readiness for early data-taking. Thus, early trigger tables and preparations for calibr...

  11. PHYSICS

    CERN Multimedia

    P. Sphicas

    The CPT project came to an end in December 2006 and its original scope is now shared among three new areas, namely Computing, Offline and Physics. In the physics area the basic change with respect to the previous system (where the PRS groups were charged with detector and physics object reconstruction and physics analysis) was the split of the detector PRS groups (the old ECAL-egamma, HCAL-jetMET, Tracker-btau and Muons) into two groups each: a Detector Performance Group (DPG) and a Physics Object Group. The DPGs are now led by the Commissioning and Run Coordinator deputy (Darin Acosta) and will appear in the correspond¬ing column in CMS bulletins. On the physics side, the physics object groups are charged with the reconstruction of physics objects, the tuning of the simulation (in collaboration with the DPGs) to reproduce the data, the provision of code for the High-Level Trigger, the optimization of the algorithms involved for the different physics analyses (in collaboration with the analysis gr...

  12. Inventory parameters

    CERN Document Server

    Sharma, Sanjay

    2017-01-01

    This book provides a detailed overview of various parameters/factors involved in inventory analysis. It especially focuses on the assessment and modeling of basic inventory parameters, namely demand, procurement cost, cycle time, ordering cost, inventory carrying cost, inventory stock, stock out level, and stock out cost. In the context of economic lot size, it provides equations related to the optimum values. It also discusses why the optimum lot size and optimum total relevant cost are considered to be key decision variables, and uses numerous examples to explain each of these inventory parameters separately. Lastly, it provides detailed information on parameter estimation for different sectors/products. Written in a simple and lucid style, it offers a valuable resource for a broad readership, especially Master of Business Administration (MBA) students.

  13. [The use of controlled physical training in patients with acute coronary syndrome treated with intervention - assessment of effects on biochemical parameters and functional myocardial].

    Science.gov (United States)

    Kapusta, Joanna; Kapusta, Anna; Pawlicki, Lucjan; Irzmański, Robert

    2016-06-01

    Diseases of the cardiovascular system is one of the most common causes of death among people over 65 years. Due to its course and incidence are a major cause of disability and impaired quality of life for seniors, as well as a serious economic problem in health care. Important role in the prevention of cardiovascular disease plays making systematic physical activity, which is a component of any rehabilitation program. Regular physical training by doing cardio-and vasoprotective has a beneficial effect on cardiovascular status and physical performance in patients with diagnosed coronary heart disease, regardless of age. The aim of this study was to evaluate the effect of controlled exercise on selected biochemical parameters and functional myocardial infarction. A group of 89 patients were divided into 3 subgroups. In group I (n = 30) was performed 2 weeks cardiac rehabilitation program, in group II (n = 30) 4 weekly. Streamline the program consisted of a series of interval training performed using a bicycle ergometer and general exercise. The remaining group (gr. III, n = 29) participated in individually selected training program. In all subjects before and after the training cycle underwent thoracic impedance plethysmography, also determined the level of plasma natriuretic peptide NT-proBNP and echocardiography and exercise test. After training, in groups, which carried out a controlled physical training, improvement was observed: exercise capacity of patients respectively in group I (p = 0.0003), group II (p = 0.0001) and group III (p = 0.032), stroke volume SV, cardiac output CO and global myocardial contractility, there was also reduction in the concentration of natriuretic peptide NT-proBNP. Furthermore, the correlation between the results shown pletyzmography parameters and NT-proBNP, SV, CO and EF. Regular physical training as part of the cardiac rehabilitation has a beneficial effect on biochemical parameters and functional myocardial infarction in patients

  14. Potential of X-Band TerraSAR-X and COSMO-SkyMed SAR Data for the Assessment of Physical Soil Parameters

    Directory of Open Access Journals (Sweden)

    Azza Gorrab

    2015-01-01

    Full Text Available The aim of this paper is to analyze the potential of X-band SAR measurements (COSMO-SkyMed and TerraSAR-X made over bare soils for the estimation of soil moisture and surface geometry parameters at a semi-arid site in Tunisia (North Africa. Radar signals acquired with different configurations (HH and VV polarizations, incidence angles of 26° and 36° are statistically compared with ground measurements (soil moisture and roughness parameters. The radar measurements are found to be highly sensitive to the various soil parameters of interest. A linear relationship is determined for the radar signals as a function of volumetric soil moisture, and a logarithmic correlation is observed between the radar signals and three surface roughness parameters: the root mean square height (Hrms, the parameter Zs = Hrms2/l (where l is the correlation length and the parameter Zg = Hrms × (Hrms/lα (where α is the power of the surface height correlation function. The highest dynamic sensitivity is observed for Zg at high incidence angles. Finally, the performance of different physical and semi-empirical backscattering models (IEM, Baghdadi-calibrated IEM and Dubois models is compared with SAR measurements. The results provide an indication of the limits of validity of the IEM and Dubois models, for various radar configurations and roughness conditions. Considerable improvements in the IEM model performance are observed using the Baghdadi-calibrated version of this model.

  15. Effect of compositional dependence on physical and optical parameters of Te{sub 17}Se{sub 83−x}Bi{sub x} glassy system

    Energy Technology Data Exchange (ETDEWEB)

    Sharma, Pankaj, E-mail: pks_phy@yahoo.co.in [Department of Physics and Materials Science, Jaypee University of Information Technology, Waknaghat, Solan, HP 173234 (India); El-Bana, M.S.; Fouad, S.S. [Nano-Science and Semiconductor Laboratories, Department of Physics, Faculty of Education, Ain Shams University, Cairo (Egypt); Sharma, Vineet [Department of Physics and Materials Science, Jaypee University of Information Technology, Waknaghat, Solan, HP 173234 (India)

    2016-05-15

    In the present paper we have studied the effect of Bi addition on the physical and optical properties of thermally evaporated Te{sub 17}Se{sub 83−x}Bi{sub x} thin films. With Bi addition the density, mean coordination number, mechanical constraints, glass transition temperature increases. The other parameters theoretical energy gap, lone pair electron, deviation from stoichiometry decreases. Transmission spectra have been taken in the spectral range 400 nm–2500 nm using ultraviolet–visible–near infrared spectrophotometer. The fundamental absorption edge shifts towards longer wavelength with Bi incorporation. Optical energy gap and linear refractive index have been determined using transmission spectra. A good correlation has been drawn between the optical and theoretical parameters. Using linear optical parameters, the nonlinear optical susceptibility and nonlinear refractive index have been estimated. - Highlights: • Physical and optical parameters have been analyzed for Te{sub 17}Se{sub 83−x}Bi{sub x} glassy alloys. • The addition of Bi leads to decrease of average heat of atomization and cohesive energy. • The optical band gap decreases with increasing Bi content. • The third order susceptibility and nonlinear refractive index show an increase with increase in the Bi content.

  16. First-order exchange coefficient coupling for simulating surface water-groundwater interactions: Parameter sensitivity and consistency with a physics-based approach

    Science.gov (United States)

    Ebel, B.A.; Mirus, B.B.; Heppner, C.S.; VanderKwaak, J.E.; Loague, K.

    2009-01-01

    Distributed hydrologic models capable of simulating fully-coupled surface water and groundwater flow are increasingly used to examine problems in the hydrologic sciences. Several techniques are currently available to couple the surface and subsurface; the two most frequently employed approaches are first-order exchange coefficients (a.k.a., the surface conductance method) and enforced continuity of pressure and flux at the surface-subsurface boundary condition. The effort reported here examines the parameter sensitivity of simulated hydrologic response for the first-order exchange coefficients at a well-characterized field site using the fully coupled Integrated Hydrology Model (InHM). This investigation demonstrates that the first-order exchange coefficients can be selected such that the simulated hydrologic response is insensitive to the parameter choice, while simulation time is considerably reduced. Alternatively, the ability to choose a first-order exchange coefficient that intentionally decouples the surface and subsurface facilitates concept-development simulations to examine real-world situations where the surface-subsurface exchange is impaired. While the parameters comprising the first-order exchange coefficient cannot be directly estimated or measured, the insensitivity of the simulated flow system to these parameters (when chosen appropriately) combined with the ability to mimic actual physical processes suggests that the first-order exchange coefficient approach can be consistent with a physics-based framework. Copyright ?? 2009 John Wiley & Sons, Ltd.

  17. Coupling structure in LED System-In-Package design: a physical responses-based critical parameter sheet like approach

    NARCIS (Netherlands)

    Borst, de E.C.M.; Gielen, A.W.J.; Etman, L.F.P.

    2012-01-01

    Abstract This paper introduces an approach to study the coupling structure between the design parameters and design objectives of a LED system-in-package (SiP) design concept [1]. The LED SiP is an integrated device that combines the LED chip with driver chips and potential other components in a

  18. Coupling structure in LED System-in-Package design: a physical responses-based critical parameter sheet like approach

    NARCIS (Netherlands)

    Borst, E.C.M. de; Gielen, A.W.J.; Etman, L.F.P.

    2012-01-01

    This paper introduces an approach to study the coupling structure between the design parameters and design objectives of a LED system-in-package (SiP) design concept [1]. The LED SiP is an integrated device that combines the LED chip with driver chips and potential other components in a single

  19. Cardiac Acceleration at the Onset of Exercise : A Potential Parameter for Monitoring Progress During Physical Training in Sports and Rehabilitation

    NARCIS (Netherlands)

    Hettinga, Florentina J.; Monden, Paul G.; van Meeteren, Nico L. U.; Daanen, Hein A. M.

    There is a need for easy-to-use methods to assess training progress in sports and rehabilitation research. The present review investigated whether cardiac acceleration at the onset of physical exercise (HRonset) can be used as a monitoring variable. The digital databases of Scopus and PubMed were

  20. Cardiac acceleration at the onset of exercise: A potential parameter for monitoring progress during physical training in sports and rehabilitation

    NARCIS (Netherlands)

    Hettinga, F.J.; Monden, P.G.; Meeteren, N.L.U. van; Daanen, H.A.M.

    2014-01-01

    There is a need for easy-to-use methods to assess training progress in sports and rehabilitation research. The present review investigated whether cardiac acceleration at the onset of physical exercise (HRonset) can be used as a monitoring variable. The digital databases of Scopus and PubMed were

  1. PHYSICS

    CERN Multimedia

    Submitted by

    Physics Week: plenary meeting on physics groups plans for startup (14–15 May 2008) The Physics Objects (POG) and Physics Analysis (PAG) Groups presented their latest developments at the plenary meeting during the Physics Week. In the presentations particular attention was given to startup plans and readiness for data-taking. Many results based on the recent cosmic run were shown. A special Workshop on SUSY, described in a separate section, took place the day before the plenary. At the meeting, we had also two special DPG presentations on “Tracker and Muon alignment with CRAFT” (Ernesto Migliore) and “Calorimeter studies with CRAFT” (Chiara Rovelli). We had also a report from Offline (Andrea Rizzi) and Computing (Markus Klute) on the San Diego Workshop, described elsewhere in this bulletin. Tracking group (Boris Mangano). The level of sophistication of the tracking software increased significantly over the last few months: V0 (K0 and Λ) reconstr...

  2. The Experience of a Highly Skilled Student during Handball Lessons in Physical Education: A Relevant Pointer to the Gap between School and Sports Contexts of Practice

    Science.gov (United States)

    Crance, Marie-Cecile; Trohel, Jean; Saury, Jacques

    2013-01-01

    Introduction: This study investigated the experience of a highly skilled student during a handball physical education unit in a French high school. More specifically, the analysis describes the nature of his involvement during two lessons that follow a pedagogical model close to the principles of Sport Education. The present case study of a…

  3. Effect of a MAST Exercise Program on Anthropometric Parameters, Physical Fitness, and Serum Lipid Levels in Obese Postmenopausal Women

    Directory of Open Access Journals (Sweden)

    Trabka Bartosz

    2014-10-01

    Full Text Available The purpose of this study was to examine an influence of a mixed aerobic and strength training program (MAST on anthropometry, serum lipid levels, physical performance, and functional fitness in obese postmenopausal women. The MAST sessions were held three times per week, and the exercise program lasted for 10 weeks. The exercise group demonstrated a statistically significant improvement in maximal oxygen uptake, a waist/hip ratio, and strength of the upper and lower body. An increase in LDL-C levels was observed in the control group. A 10-week MAST program encompassing Nordic-walking as an aerobic component, and strength exercises, induces positive changes in functional fitness, HDL-C, LDL-C and a waist/hip ratio in obese postmenopausal women. The observed changes implicate an increase in a health-related quality of life among the women administered to the physical exercise program

  4. Effects of Design/Operating Parameters and Physical Properties on Slag Thickness and Heat Transfer during Coal Gasification

    Directory of Open Access Journals (Sweden)

    Insoo Ye

    2015-04-01

    Full Text Available The behaviors of the slag layers formed by the deposition of molten ash onto the wall are important for the operation of entrained coal gasifiers. In this study, the effects of design/operation parameters and slag properties on the slag behaviors were assessed in a commercial coal gasifier using numerical modeling. The parameters influenced the slag behaviors through mechanisms interrelated to the heat transfer, temperature, velocity, and viscosity of the slag layers. The velocity profile of the liquid slag was less sensitive to the variations in the parameters. Therefore, the change in the liquid slag thickness was typically smaller than that of the solid slag. The gas temperature was the most influential factor, because of its dominant effect on the radiative heat transfer to the slag layer. The solid slag thickness exponentially increased with higher gas temperatures. The influence of the ash deposition rate was diminished by the high-velocity region developed near the liquid slag surface. The slag viscosity significantly influenced the solid slag thickness through the corresponding changes in the critical temperature and the temperature gradient (heat flux. For the bottom cone of the gasifier, steeper angles were favorable in reducing the thickness of the slag layers.

  5. Optimization of tissue physical parameters for accurate temperature estimation from finite-element simulation of radiofrequency ablation

    International Nuclear Information System (INIS)

    Subramanian, Swetha; Mast, T Douglas

    2015-01-01

    Computational finite element models are commonly used for the simulation of radiofrequency ablation (RFA) treatments. However, the accuracy of these simulations is limited by the lack of precise knowledge of tissue parameters. In this technical note, an inverse solver based on the unscented Kalman filter (UKF) is proposed to optimize values for specific heat, thermal conductivity, and electrical conductivity resulting in accurately simulated temperature elevations. A total of 15 RFA treatments were performed on ex vivo bovine liver tissue. For each RFA treatment, 15 finite-element simulations were performed using a set of deterministically chosen tissue parameters to estimate the mean and variance of the resulting tissue ablation. The UKF was implemented as an inverse solver to recover the specific heat, thermal conductivity, and electrical conductivity corresponding to the measured area of the ablated tissue region, as determined from gross tissue histology. These tissue parameters were then employed in the finite element model to simulate the position- and time-dependent tissue temperature. Results show good agreement between simulated and measured temperature. (note)

  6. Optimization of tissue physical parameters for accurate temperature estimation from finite-element simulation of radiofrequency ablation.

    Science.gov (United States)

    Subramanian, Swetha; Mast, T Douglas

    2015-10-07

    Computational finite element models are commonly used for the simulation of radiofrequency ablation (RFA) treatments. However, the accuracy of these simulations is limited by the lack of precise knowledge of tissue parameters. In this technical note, an inverse solver based on the unscented Kalman filter (UKF) is proposed to optimize values for specific heat, thermal conductivity, and electrical conductivity resulting in accurately simulated temperature elevations. A total of 15 RFA treatments were performed on ex vivo bovine liver tissue. For each RFA treatment, 15 finite-element simulations were performed using a set of deterministically chosen tissue parameters to estimate the mean and variance of the resulting tissue ablation. The UKF was implemented as an inverse solver to recover the specific heat, thermal conductivity, and electrical conductivity corresponding to the measured area of the ablated tissue region, as determined from gross tissue histology. These tissue parameters were then employed in the finite element model to simulate the position- and time-dependent tissue temperature. Results show good agreement between simulated and measured temperature.

  7. Effects of combined physical activity and dietary intervention on obesity and metabolic parameters in adults with abdominal obesity.

    Science.gov (United States)

    Soon, Heng Kiang; Saad, Hazizi Abu; Taib, Mohd Nasir Mohd; Rahman, Hejar Abd; Mun, Chan Yoke

    2013-03-01

    A twelve-week controlled intervention trial was carried out to evaluate the effects of combined physical activity and dietary intervention on obesity and metabolic risk factors among employees of Universiti Putra Malaysia. Participants consisted of adults aged 25-55 years with no reported chronic diseases but with abdominal obesity. They were assigned to either a combined physical activity and dietary intervention group or a control group. The final sample consisted of 56 participants, with an equal number of 28 for each study group. No significant group effect was observed for any variable except for hip circumference (HC) and fasting plasma glucose (FPG). There was a significant increase in HC (p=0.007) and reduction in FPG (p=0.02) in the intervention group compared to the control group. In the intervention group, HC (p=0.002), triglycerides (TG) (p=0.0001), total cholesterol (TC) (p=0.0001), LDL cholesterol (LDLC) (p=0.0001) and FPG (p=0.005) were significantly reduced, while waist circumference (WC) (p=0.025) and the waist-to-hip ratio (WHR) (p=0.027) were significantly reduced in the control group. No significant change in steps/day or calorie intake'was observed in either group. Taken together, these data indicate that the combined physical activity and dietary intervention was not effective at improving diet or physical activity level. However, the intervention was effective in improving FPG among participants with abdominal obesity. The significant increase in HC in the interventions group warrants further study. These findings will be useful to further improve group-based intervention for the prevention and management of obesity.

  8. Criticality accident in uranium fuel processing plant. The estimation of the total number of fissions with related reactor physics parameters

    International Nuclear Information System (INIS)

    Nishina, Kojiro; Oyamatsu, Kazuhiro; Kondo, Shunsuke; Sekimoto, Hiroshi; Ishitani, Kazuki; Yamane, Yoshihiro; Miyoshi, Yoshinori

    2000-01-01

    This accident occurred when workers were pouring a uranium solution into a precipitation tank with handy operation against the established procedure and both the cylindrical diameter and the total mass exceeded the limited values. As a result, nuclear fission chain reactor in the solution reached not only a 'criticality' state continuing it independently but also an instantly forming criticality state exceed the criticality and increasing further nuclear fission number. The place occurring the accident at this time was not reactor but a place having not to form 'criticality' called by a processing process of uranium fuel. In such place, as because of relating to mechanism of chain reaction, it is required naturally for knowledge on the reactor physics, it is also necessary to understand chemical reaction in chemical process, and functions of tanks, valves and pumps mounted at the processes. For this purpose, some information on uranium concentration ratio, atomic density of nuclides largely affecting to chain reaction such as uranium, hydrogen, and so forth in the solution, shape, inner structure and size of container for the solution, and its temperature and total volume, were necessary for determining criticality volume of the accident uranium solution by using nuclear physics procedures. Here were described on estimation of energy emission in the JCO accident, estimation from analytical results on neutron and solution, calculation of various nuclear physics property estimation on the JCO precipitation tank at JAERI. (G.K.)

  9. A motion algorithm to extract physical and motion parameters of mobile targets from cone-beam computed tomographic images.

    Science.gov (United States)

    Alsbou, Nesreen; Ahmad, Salahuddin; Ali, Imad

    2016-05-17

    A motion algorithm has been developed to extract length, CT number level and motion amplitude of a mobile target from cone-beam CT (CBCT) images. The algorithm uses three measurable parameters: Apparent length and blurred CT number distribution of a mobile target obtained from CBCT images to determine length, CT-number value of the stationary target, and motion amplitude. The predictions of this algorithm are tested with mobile targets having different well-known sizes that are made from tissue-equivalent gel which is inserted into a thorax phantom. The phantom moves sinusoidally in one-direction to simulate respiratory motion using eight amplitudes ranging 0-20 mm. Using this motion algorithm, three unknown parameters are extracted that include: Length of the target, CT number level, speed or motion amplitude for the mobile targets from CBCT images. The motion algorithm solves for the three unknown parameters using measured length, CT number level and gradient for a well-defined mobile target obtained from CBCT images. The motion model agrees with the measured lengths which are dependent on the target length and motion amplitude. The gradient of the CT number distribution of the mobile target is dependent on the stationary CT number level, the target length and motion amplitude. Motion frequency and phase do not affect the elongation and CT number distribution of the mobile target and could not be determined. A motion algorithm has been developed to extract three parameters that include length, CT number level and motion amplitude or speed of mobile targets directly from reconstructed CBCT images without prior knowledge of the stationary target parameters. This algorithm provides alternative to 4D-CBCT without requirement of motion tracking and sorting of the images into different breathing phases. The motion model developed here works well for tumors that have simple shapes, high contrast relative to surrounding tissues and move nearly in regular motion pattern

  10. What Is Construed as Relevant Knowledge in Physics Teaching? Similarities and Differences in How Knowledge and Power Are Staged in Three Lower Secondary Classrooms

    Science.gov (United States)

    Lidar, Malena; Danielsson, Anna T.; Berge, Maria

    2018-05-01

    The content that is privileged in teaching has consequences for what the students are given the opportunity to learn and can thus be regarded as an aspect of power. We analyse power aspects in the teaching of physics by identifying actions that guide or direct other people's actions, and then analyse similarities and differences in different classrooms in terms of how governance is staged and what potential consequences this can have. The analyses are made on data from classroom activities, documented through video recordings and field notes, in three lower secondary schools in Y8 and Y9, respectively. At first glance, teachers from all three schools adhere to a traditional interpretation of a physics curriculum. But a more in-depth analysis shows that the students in the different classrooms are given quite dissimilar opportunities to participate in teaching and create relationships with the content. What appears to be a desirable way of acting offers different conditions for meaning-making. In an increasingly individualised society where people are expected to be active, reflective and make choices for their own personal good, the students in these three classrooms are offered very different conditions to practice and learn to take part in knowledge-making, connect physics content to their everyday life and exercise informed citizenship.

  11. Linking Soil Physical Parameters Along a Density Gradient in a Loess-Soil Long-Term Experiment

    DEFF Research Database (Denmark)

    Eden, Marie; Møldrup, Per; Schjønning, Per

    2012-01-01

    It is important to understand the impact of texture and organic carbon (OC) on soil structure development. Only few studies investigated this for silt-dominated soils. In this study, soil physical properties were determined on samples from a controlled experiment (Static Fertilization Experiment...... hydraulic conductivity. The management resulted in a distinct gradient in OC. A bulk density gradient developed from differences in amount of clay not complexed with OC. This gradient in bulk density mainly affected content of pores larger than 3 [mu]m. The air-connected porosity measured by a pycnometer...

  12. Calchulation of physical parameters of the subcritical assembly located in the higher Institute of Nuclear Sciences and Technology

    International Nuclear Information System (INIS)

    Castaneda Donate, S.; Quintero, B.; Santos, J.

    1992-01-01

    A detailed calculation of the core is necessary to analyze the influence of the neutron source on the neutron flux in the subcritical assembly of the Higher Institute Nuclear Science and Technology. A new calculation methodology for the neutronic characteristics of the subcritical assembly is presented, based on the calculation tools available nowadays in our department (WIMS, SNAP, etc). The main results are: Neutron-physical constants of the reactor cells; absolute neutron flux distribution and an estimation of the adequate regions for detector location based on higher armonic terms influence

  13. The CEBAF test package: A symbolic and dynamic test, histogram and parameter package for on- and off-line particle physics data analysis

    International Nuclear Information System (INIS)

    Wood, S.A.; Abbott, S.

    1995-01-01

    Nuclear physics data analysis programs often use packages, such as Q, that allow parameter values, test definitions and histogram booking parameters to be controlled at run time through external files or shared memory. Data within a physics analyzer are usually referenced by indices, leading to a high use of equivalence statements and to extra bookkeeping. In the CEBAF Test Package (CTP), parameters, tests and histogram definitions defined in external files all refer to data elements by the same variable names as used in the C or Fortran source code for the analyzer. This is accomplished by requirieng the analyzer developer to open-quotes registerclose quotes each variable and array that is to be accessible by the package. Any registered variable as well as the test and histogram definitions may be dynamically read and modified by tasks that communicate via standard networking calls. As this package is implemented in C and requires only HBOOK and SUN RPC networking, it is highly portable. CTP works with the CEBAF Online Data Acquisition system (CODA), but may be used with other data acquisition systems or stand alone

  14. On the physical interpretation of torsion-rotation parameters in methanol and acetaldehyde: Comparison of global fit and ab initio results

    International Nuclear Information System (INIS)

    Xu, L.; Lees, R.M.; Hougen, J.T.

    1999-01-01

    Equilibrium structural constants and certain torsion endash rotation interaction parameters have been determined for methanol and acetaldehyde from ab initio calculations using GAUSSIAN 94. The substantial molecular flexing which occurs in going from the bottom to the top of the torsional potential barrier can be quantitatively related to coefficients of torsion endash rotation terms having a (1-cos ampersand hthinsp;3γ) dependence on torsional angle γ. The barrier height, six equilibrium structural constants characterizing the bottom of the potential well, and six torsion endash rotation constants are all compared to experimental parameters obtained from global fits to large microwave and far-infrared data sets for methanol and acetaldehyde. The rather encouraging agreement between the Gaussian and global fit results for methanol seems both to validate the accuracy of ab initio calculations of these parameters, and to demonstrate that the physical origin of these torsion endash rotation interaction terms in methanol lies primarily in structural relaxation with torsion. The less satisfactory agreement between theory and experiment for acetaldehyde requires further study. copyright 1999 American Institute of Physics

  15. Evaluation of different physical parameters that affect the clinical image quality for gamma camera by using different radionuclides

    International Nuclear Information System (INIS)

    Salah, F.A.; Ziada, G.; Hejazy, M.A.; Khalil, W.A.

    2008-01-01

    Some scintillation camera manufactures adhere to standard code of performance specification established by National Electric Manufactures Association (NEMA). Items such as differential and integral uniformity, spatial resolution energy resolution, etc. are all calculated with reproducible methodology that allows the user reliable technique for creation of these standards to avoid any lack of clinical service that may violate the ethics of patient care. Because 99m Tc is the most frequently used radionuclide in nuclear medicine, many clinics perform the daily uniformity and weekly resolution checks using this radionuclide. But when other commonly used radionuclide such as Tl-201,Ga-67 and I-131 are used, no standardized quality control is performed. So in these study we perform to evaluate the response of ADAC(digital) gamma camera and SELO(analogue) gamma camera to four radionuclide (Tl-201,Ga-67, I-131, and 99m Tc) flood image acquired using different non-uniformity correction tables. In the planer study uniformity and resolution images were obtained using ADAC and SELO cameras, linearity was obtained only by ADAC camera, while in the SPECT study uniformity and contrast images were obtained using ADAC camera only. The response for using different non-uniformity correction tables acquired using different isotopes was different from gamma camera model to another. We can conclude that the most of the gamma camera quality control parameters (uniformity, resolution and contrast) are influenced by variation in the correction tables, while other parameters not affected by this variation like linearity. (author)

  16. Nictemeral Variation of Physical Chemical and Biological Parameters of Ribeirão das Cruzes, Araraquara-SP

    Directory of Open Access Journals (Sweden)

    Vitor Rocha Santos

    2015-12-01

    Full Text Available Improper use of water, its degradation and irregular distribution can affect the quantity and quality needed for future generations, as well as create conflicts of interest between the industrial, urban and agricultural segments. In this context, it is of great importance the realization of studies on the quality of the hydric resources based on the analysis of temporal variation of limnological parameters. This study was conducted in the sub-basin of Ribeirão das Cruzes, which contributes to the water supply of the city of Araraquara (SP around 30% of all water captured and offered to the population. The objective of this research was to compare the water quality of river upstream and downstream of effluent discharge from a local treatment station in a 24 hour period (diurnal cycle variation. Data collection, comprising the period of one day, was done in order to observe the dynamics of operation and range of variation of the ecological processes in the studied system. The parameters analyzed showed significant variations in the sections of the upstream and downstream from the effluent discharge. With the nictemeral analysis it is evident the influence of effluents on the the waters of Ribeirão das Cruzes, especially during certain periods of the day.

  17. The influence of a physical activity program on the body and the cardio vascular parameters of premenopausal women

    Directory of Open Access Journals (Sweden)

    Almudena Ramírez Balas

    2012-07-01

    Full Text Available During the life cycle of a woman's body figure is changed gradually, but on reaching middle age, as a result of follicular loss of ovarian function among others, are emphasized the physiological changes and increase health risk and welfare. Androgyny in association with obesity increases the risk for diabetes, hypertension, dyslipidemia, atherosclerosis, cardiovascular disease, gallstones, osteoarthritis, arthritis, cancers and other disorders of female middle age. Physical activity has gained importance increasing in therapy in the climacteric. It has demonstrated the positive effects of exercise on cardiovascular disease and weight maintenance. This study investigates the influence of a physical activity program for five months on cardiovascular risk factors like high blood pressure and body composition in premenopausal women. The study included 20 premenopausal women, separated into two groups: younger than 35 years (n = 10, and over 35 years (n = 10. The experimental subjects underwent an assessment of blood pressure and body composition before and after an aerobic training. Results indicate greater extent in reducing diastolic blood pressure and body fat in over 35 years premenopausal women. Therefore, performing aerobics, step and toning improves factors cardiovascular risk as high blood pressure and body composition in over 35 premenopausal women.

  18. [Association between physical fitness parameters and health related quality of life in Chilean community-dwelling older adults].

    Science.gov (United States)

    Guede Rojas, Francisco; Chirosa Ríos, Luis Javier; Fuentealba Urra, Sergio; Vergara Ríos, César; Ulloa Díaz, David; Campos Jara, Christian; Barbosa González, Paola; Cuevas Aburto, Jesualdo

    2017-01-01

    There is no conclusive evidence about the association between physical fitness (PF) and health related quality of life (HRQOL) in older adults. To seek for an association between PF and HRQOL in non-disabled community-dwelling Chilean older adults. One hundred and sixteen subjects participated in the study. PF was assessed using the Senior Fitness Test (SFT) and hand grip strength (HGS). HRQOL was assessed using eight dimensions provided by the SF-12v2 questionnaire. Binary multivariate logistic regression models were carried out considering the potential influence of confounder variables. Non-adjusted models, indicated that subjects with better performance in arm curl test (ACT) were more likely to score higher on vitality dimension (OR > 1) and those with higher HGS were more likely to score higher on physical functioning, bodily pain, vitality and mental health (OR > 1). The adjusted models consistently showed that ACT and HGS predicted a favorable perception of vitality and mental health dimensions respectively (OR > 1). HGS and ACT have a predictive value for certain dimensions of HRQOL.

  19. PHYSICS

    CERN Multimedia

    J. Incandela

    The all-plenary format of the CMS week in Cyprus gave the opportunity to the conveners of the physics groups to present the plans of each physics analysis group for tackling early physics analyses. The presentations were complete, so all are encouraged to browse through them on the Web. There is a wealth of information on what is going on, by whom and on what basis and priority. The CMS week was followed by two CMS “physics events”, the ICHEP08 days and the physics days in July. These were two weeks dedicated to either the approval of all the results that would be presented at ICHEP08, or to the review of all the other Monte-Carlo based analyses that were carried out in the context of our preparations for analysis with the early LHC data (the so-called “2008 analyses”). All this was planned in the context of the beginning of a ramp down of these Monte Carlo efforts, in anticipation of data.  The ICHEP days are described below (agenda and talks at: http://indic...

  20. PHYSICS

    CERN Multimedia

    Joe Incandela

    There have been two plenary physics meetings since the December CMS week. The year started with two workshops, one on the measurements of the Standard Model necessary for “discovery physics” as well as one on the Physics Analysis Toolkit (PAT). Meanwhile the tail of the “2007 analyses” is going through the last steps of approval. It is expected that by the end of January all analyses will have converted to using the data from CSA07 – which include the effects of miscalibration and misalignment. January Physics Days The first Physics Days of 2008 took place on January 22-24. The first two days were devoted to comprehensive re¬ports from the Detector Performance Groups (DPG) and Physics Objects Groups (POG) on their planning and readiness for early data-taking followed by approvals of several recent studies. Highlights of POG presentations are included below while the activities of the DPGs are covered elsewhere in this bulletin. January 24th was devo...

  1. Influence of physical and chemical parameters on the irradiation of aqueous solutions of phenol by electron beam

    International Nuclear Information System (INIS)

    Pellizzari, Fabien

    2005-01-01

    The aim of this work was the study of the influence of different parameters by electron beam irradiation on the decomposition of phenol in aqueous solution. A simulation based on a simplified mechanism emphasized the importance of the oxygenation of the solutions in the removal of phenol by ionisation. A model of the reactor used was proposed from the study of the influence of the beam energy on the decomposition of phenol. Penetration depths of the electrons were determined. Phenol degradation was found to increase with the dose rate. The fraction of the dose into several passages under the electron beam improved the abatement of the phenol. The reoxygenation of the solutions between each passage and the kinetic expressions of irradiation could explain this effect. As expected, the first by-products identified were originated from the reaction of phenol with hydroxyl radicals. [fr

  2. Olive mill wastewater disposal in evaporation ponds in Sfax (Tunisia): moisture content effect on microbiological and physical chemical parameters.

    Science.gov (United States)

    Jarboui, Raja; Hadrich, Bilel; Gharsallah, Néji; Ammar, Emna

    2009-11-01

    The study of the isotherms desorption of olive mill wastewater (OMW) was investigated to describe its water activity under different saturated environments. The microbial biodegradation of OMW during its storage in 5 evaporation ponds located in Agareb (Sfax-Tunisia) was carried out during the oil-harvesting year held 105 days in 2004. Gravimetric static method using saturated salt solutions was used and OMW as placed at 30 degrees C and under different water activities ranging from 0.11 to 0.90. Eight models were taken from the literature to describe experimental desorption isotherms. During storage, the evolution of physico-chemical parameters including pH, temperature, evaporation, humidity, total phosphorus, chemical oxygen demand (COD), biological oxygen demand (BOD) and phenols and three microbiological flora (aerobic mesophilic bacteria, yeasts and moulds) were considered. At 30 degrees C, when relative humidity increased in the experimented ponds of 69, 84 and 90%, the evaporation speed decreased from 1.24 x 10(-5) to 5 x 10(-6) cm(3) s(-1), from 6 x 10(-5) to 7 x 10(-6) cm(3) s(-1) and from 5 x 10(-6) to 1.1 x 10(-7) cm(3) s(-1) respectively. The desorption isotherm exhibited a sigmoidal curve corresponding to type II, typical of many organic material. The GAB and Peleg models gave the best fit for describing the relationship between the equilibrium moisture content and water activity in OMW (R (2) = 0.998). During the storage period, the analysis showed an increase of all the physico-chemical parameters studied, except phenols and total phosphorus concentrations. The microbiological study showed the predominance of yeasts and moulds and the decrease of bacteria population after 75 days reflecting both effect of recalcitrant compounds and the water activity on microbial growth.

  3. Land drainage system detection using IR and visual imagery taken from autonomous mapping airship and evaluation of physical and spatial parameters of suggested method

    Science.gov (United States)

    Koska, Bronislav; Křemen, Tomáš; Štroner, Martin; Pospíšil, Jiří; Jirka, Vladimír.

    2014-10-01

    An experimental approach to the land drainage system detection and its physical and spatial parameters evaluation by the form of pilot project is presented in this paper. The novelty of the approach is partly based on using of unique unmanned aerial vehicle - airship with some specific properties. The most important parameters are carrying capacity (15 kg) and long flight time (3 hours). A special instrumentation was installed for physical characteristic testing in the locality too. The most important is 30 meter high mast with 3 meter length bracket at the top with sensors recording absolute and comparative temperature, humidity and wind speed and direction in several heights of the mast. There were also installed several measuring units recording local condition in the area. Recorded data were compared with IR images taken from airship platform. The locality is situated around village Domanín in the Czech Republic and has size about 1.8 x 1.5 km. There was build a land drainage system during the 70-ties of the last century which is made from burnt ceramic blocks placed about 70 cm below surface. The project documentation of the land drainage system exists but real state surveying haveńt been never realized. The aim of the project was land surveying of land drainage system based on infrared, visual and its combination high resolution orthophotos (10 cm for VIS and 30 cm for IR) and spatial and physical parameters evaluation of the presented procedure. The orthophoto in VIS and IR spectrum and its combination seems to be suitable for the task.

  4. Relationships among frozen-thawed semen fertility, physical parameters, certain routine sperm characteristics and testosterone in breeding Murrah buffalo (Bubalus bubalis bulls

    Directory of Open Access Journals (Sweden)

    A. K. Singh

    2014-09-01

    Full Text Available Aim: The present study was carried out to examine the relationships among frozen-thawed semen fertility, physical parameters, seminal quality, and testosterone concentration in Murrah buffalo bulls. Materials and Methods: A total of 30 breeding Murrah buffalo bulls (either progeny tested or under progeny testing program were randomly selected from two government bull farms in Punjab. None of the bulls selected for this study had any preceding physical abnormality. A field fertility trial was conducted to determine the first service conception rate (FSCR. The number of females inseminated per bull semen was 10. All the bulls were inspected for structural soundness, measurement of scrotal circumference, testicular biometry, and internal pelvic area (IPA. Frozen-thawed semen was evaluated for total motility, progressive motility, viability, concentration, abnormality, and hypo-osmotic swelling test (HOST. Testosterone was estimated in blood plasma, seminal plasma as well as frozen-thawed semen extracts for establishing relationship. Results: The FSCR was 48% in the bulls having a scrotal circumference of ≥44 cm, although, there was no significant correlation between FSCR and scrotal circumference. Similarly, no consistent relationship existed between sperm concentration and scrotal circumference. A positive correlation was observed between IPA and FSCR (r=0.294. Of the six post-thaw seminal components (total motility, progressive motility, viability, HOST (%, total abnormality and concentration only total motility had a high significant (p<0.01 correlation with FSCR (r=0.694. Varied correlations existed between other seminal parameters and fertility. Using a simple regression analysis, the post-thaw motility, IPA, prepuce length and testosterone (independent variables combined to explain approximately 62% of the variation in the FSCR (dependent variable. Conclusion: The present study indicated that despite low to high correlations between seminal

  5. Physical, bioactive and sensory quality parameters of reduced sugar chocolates formulated with natural sweeteners as sucrose alternatives.

    Science.gov (United States)

    Belščak-Cvitanović, Ana; Komes, Draženka; Dujmović, Marko; Karlović, Sven; Biškić, Matija; Brnčić, Mladen; Ježek, Damir

    2015-01-15

    In this study, sugar alcohols, dietary fibers, syrups and natural sweeteners were used as sucrose alternatives in the production of reduced sugar chocolates (50% of cocoa parts) with enhanced bioactive profile. Formulated chocolates were evaluated for their physical (particle size distribution, texture) and sensory properties, sugar composition, polyphenolic compounds content and antioxidant capacity. All produced reduced sugar chocolates ensured >20% lower calorific value than conventional chocolate (prepared with sucrose). Formulated chocolates containing stevia leaves and peppermint exhibited the best sensory properties (especially with regard to mouthfeel, sweetness and herbal aroma), as well as the highest polyphenolic content and antioxidant capacity. Particle size and hardness of chocolates increased in comparison to conventional chocolate, in particular when the combination of fructose and isomalt or lactitol was used. The bioactive profile of produced chocolates was enriched with phenolic acids, flavone (luteolin and apigenin) and flavonol (quercetin) derivatives, which were not identified in control chocolate. Copyright © 2014 Elsevier Ltd. All rights reserved.

  6. Assessment of brittleness and empirical correlations between physical and mechanical parameters of the Asmari limestone in Khersan 2 dam site, in southwest of Iran

    Science.gov (United States)

    Lashkaripour, Gholam Reza; Rastegarnia, Ahmad; Ghafoori, Mohammad

    2018-02-01

    The determination of brittleness and geomechanical parameters, especially uniaxial compressive strength (UCS) and Young's modulus (ES) of rocks are needed for the design of different rock engineering applications. Evaluation of these parameters are time-consuming processes, tedious, expensive and require well-prepared rock cores. Therefore, compressional wave velocity (Vp) and index parameters such as point load index and porosity are often used to predict the properties of rocks. In this paper, brittleness and other properties, physical and mechanical in type, of 56 Asmari limestones in dry and saturated conditions were analyzed. The rock samples were collected from Khersan 2 dam site. This dam with the height of 240 m is being constructed and located in the Zagros Mountain, in the southwest of Iran. The bedrock and abutments of the dam site consist of Asemari and Gachsaran Formations. In this paper, a practical relation for predicting brittleness and some relations between mechanical and index parameters of the Asmari limestone were established. The presented equation for predicting brittleness based on UCS, Brazilian tensile strength and Vp had high accuracy. Moreover, results showed that the brittleness estimation based on B3 concept (the ratio of multiply compressive strength in tensile strength divided 2) had more accuracy as compared to the B2 (the ratio of compressive strength minus tensile strength to compressive strength plus tensile strength) and B1 (the ratio of compressive strength to tensile strength) concepts.

  7. Some Physical, Chemical, and Biological Parameters of Samples of Scleractinium Coral Aquaculture Skeleton Used for Reconstruction/Engineering of the Bone Tissue.

    Science.gov (United States)

    Popov, A A; Sergeeva, N S; Britaev, T A; Komlev, V S; Sviridova, I K; Kirsanova, V A; Akhmedova, S A; Dgebuadze, P Yu; Teterina, A Yu; Kuvshinova, E A; Schanskii, Ya D

    2015-08-01

    Physical and chemical (phase and chemical composition, dynamics of resorption, and strength properties), and biological (cytological compatibility and scaffold properties of the surface) properties of samples of scleractinium coral skeletons from aquacultures of three types and corresponding samples of natural coral skeletons (Pocillopora verrucosa, Acropora formosa, and Acropora nobilis) were studied. Samples of scleractinium coral aquaculture skeleton of A. nobilis, A. formosa, and P. verrucosa met the requirements (all study parameters) to materials for osteoplasty and 3D-scaffolds for engineering of bone tissue.

  8. THE STATUS OF STUDENTS OF THE FACULTY OF PHYSICAL EDUCATION AND SPORTS IN COMPARISON WITH STANDARD PARAMETERS OF THE ILLINOIS AGILITY TEST

    Directory of Open Access Journals (Sweden)

    Malsor Gjonbalaj

    2015-05-01

    Full Text Available The aim of this study is to verify the current agility status of students of the Faculty of Physical Education and Sports of the University of Prishtina. Also, another aim was to compare results of the students with the international norms of the standard agility test. In this study were included 92 students of FPES. The agility tests were done based on the Illinois Agility Test as a standard test. The methods used to analyse the data obtained from the research, are standard methods, basic statistical parameters and comparative methods. From the basic statistical parameters, it was noticed a homogenous distribution of results. The distribution between the minimal and maximal result is from 15.15 – 20.16, with the average 16.54 and standard deviation 0.92. Based on the parameters on distribution, it is noticeable that the value of skew parameters is 1.43. Comparing to international norms of standard agility test, it is noticeable that the students if the Faculty of Physical Education and Sports have a satisfactory level and belong to the category of average results 16.54 sec, the international standard norms are 16.2 - 18.1 sec, which implies average achievement of results. Comparing to other groups of students, our sample showed almost the same results with the group of students tested by Mehmet Kutlu, Hakan Yapýcý, Oğuzhan Yoncalık, Serkan Çelik, 2012, where the results of their students are 16.54 ± 0.41, but the testing took place in synthetic carpet.

  9. PHYSICS

    CERN Multimedia

    Guenther Dissertori

    The time period between the last CMS week and this June was one of intense activity with numerous get-together targeted at addressing specific issues on the road to data-taking. The two series of workshops, namely the “En route to discoveries” series and the “Vertical Integration” meetings continued.   The first meeting of the “En route to discoveries” sequence (end 2007) had covered the measurements of the Standard Model signals as necessary prerequisite to any claim of signals beyond the Standard Model. The second meeting took place during the Feb CMS week and concentrated on the commissioning of the Physics Objects, whereas the third occurred during the April Physics Week – and this time the theme was the strategy for key new physics signatures. Both of these workshops are summarized below. The vertical integration meetings also continued, with two DPG-physics get-togethers on jets and missing ET and on electrons and photons. ...

  10. PHYSICS

    CERN Multimedia

    Chris Hill

    2012-01-01

    The months that have passed since the last CMS Bulletin have been a very busy and exciting time for CMS physics. We have gone from observing the very first 8TeV collisions produced by the LHC to collecting a dataset of the collisions that already exceeds that recorded in all of 2011. All in just a few months! Meanwhile, the analysis of the 2011 dataset and publication of the subsequent results has continued. These results come from all the PAGs in CMS, including searches for the Higgs boson and other new phenomena, that have set the most stringent limits on an ever increasing number of models of physics beyond the Standard Model including dark matter, Supersymmetry, and TeV-scale gravity scenarios, top-quark physics where CMS has overtaken the Tevatron in the precision of some measurements, and bottom-quark physics where CMS made its first discovery of a new particle, the Ξ*0b baryon (candidate event pictured below). Image 2:  A Ξ*0b candidate event At the same time POGs and PAGs...

  11. PHYSICS

    CERN Multimedia

    D. Acosta

    2011-01-01

    Since the last CMS Week, all physics groups have been extremely active on analyses based on the full 2010 dataset, with most aiming for a preliminary measurement in time for the winter conferences. Nearly 50 analyses were approved in a “marathon” of approval meetings during the first two weeks of March, and the total number of approved analyses reached 90. The diversity of topics is very broad, including precision QCD, Top, and electroweak measurements, the first observation of single Top production at the LHC, the first limits on Higgs production at the LHC including the di-tau final state, and comprehensive searches for new physics in a wide range of topologies (so far all with null results unfortunately). Most of the results are based on the full 2010 pp data sample, which corresponds to 36 pb-1 at √s = 7 TeV. This report can only give a few of the highlights of a very rich physics program, which is listed below by physics group...

  12. Evaluation of health-related physical fitness parameters and association analysis with depression, anxiety, and quality of life in patients with fibromyalgia.

    Science.gov (United States)

    Sener, Umit; Ucok, Kagan; Ulasli, Alper M; Genc, Abdurrahman; Karabacak, Hatice; Coban, Necip F; Simsek, Hasan; Cevik, Halime

    2016-08-01

    The purpose of this study was to investigate the physical fitness parameters (maximal aerobic capacity, muscle strength and flexibility), daily physical activity, resting metabolic rate (RMR), pulmonary function tests (PFTs), body composition, depression, anxiety and health-related quality of life (HRQoL) changes as well as the associations among these parameters in patients with fibromyalgia and to compare them with healthy controls. Thirty-nine women with fibromyalgia and 40 controls were included in this study. Physical measurements, HRQoL questionnaire, Beck Depression Inventory (BDI) score and Beck Anxiety Inventory (BAI) score were applied to all participants. Maximal aerobic capacity, trunk flexibility, daily step numbers, total energy expenditure, RMR and PFT values were not significantly different between the patients and the controls. Fibromyalgia patients had higher daily moderate activity times, active energy expenditure values, and BDI and BAI scores, while their lower handgrip strength and back-leg strength values and Short-form health survey (SF)-36 scores were comparable to controls. Handgrip strength and back-leg strength values showed moderately positive correlations with SF-36 scores (total, physical health, mental health) and moderately negative correlations with BDI and BAI scores in patients with fibromyalgia. Our results suggested that muscle strength, HRQoL, depression and anxiety symptomatology were impaired in fibromyalgia patients compared to healthy controls. Low muscle strength is related to reduced HRQoL and increased depression and anxiety symptomatology in patients with fibromyalgia. Also we suggest that performing daily exercises, including aerobic and strength training, as part of one's lifestyle may have beneficial effects in fibromyalgia patients. © 2013 Asia Pacific League of Associations for Rheumatology and Wiley Publishing Asia Pty Ltd.

  13. Change in inflammatory parameters in prefrail and frail persons obtaining physical training and nutritional support provided by lay volunteers: A randomized controlled trial.

    Directory of Open Access Journals (Sweden)

    Sandra Haider

    Full Text Available The aim of the study was to compare the effects of home visits with physical training and nutritional support on inflammatory parameters to home visits with social support alone within a randomized controlled trial. Prefrail and frail persons received home visits from lay volunteers twice a week for 12 weeks. Participants in the physical training and nutritional intervention group (PTN, n = 35 conducted two sets of six strength exercises and received nutritional support. The social support group (SoSu, n = 23 received visits only. TNF-α, IL-6, CRP, and total leukocyte count were assessed at baseline and after 12 weeks. Changes over time within groups were analyzed with paired t-tests; differences between groups were analyzed with ANCOVA for repeated measurements. In the PTN group, IL-6 and CRP remained stable, whereas in the SoSu group, IL-6 increased significantly from a median value of 2.6 pg/l (min-max = 2.0-10.2 to 3.0 pg/l (min-max = 2.0-20.8, and CRP rose from 0.2 mg/dl (min-max = 0.1-0.9 to 0.3 mg/dl (min-max = 0.1-3.0 after 12 weeks. In CRP, a significant difference between groups was found. TNF-α and total leukocyte count did not change in either the PTN group or the SoSu group. Persons showing an increase in physical performance (OR 4.54; 95% CI = 1.33-15.45 were more likely to have constant or decreased IL-6 values than persons who showed no improvement. In conclusion, in non-robust older adults, a physical training and nutritional support program provided by lay volunteers can delay a further increase in some inflammatory parameters.

  14. Change in inflammatory parameters in prefrail and frail persons obtaining physical training and nutritional support provided by lay volunteers: A randomized controlled trial.

    Science.gov (United States)

    Haider, Sandra; Grabovac, Igor; Winzer, Eva; Kapan, Ali; Schindler, Karin Emmi; Lackinger, Christian; Titze, Sylvia; Dorner, Thomas Ernst

    2017-01-01

    The aim of the study was to compare the effects of home visits with physical training and nutritional support on inflammatory parameters to home visits with social support alone within a randomized controlled trial. Prefrail and frail persons received home visits from lay volunteers twice a week for 12 weeks. Participants in the physical training and nutritional intervention group (PTN, n = 35) conducted two sets of six strength exercises and received nutritional support. The social support group (SoSu, n = 23) received visits only. TNF-α, IL-6, CRP, and total leukocyte count were assessed at baseline and after 12 weeks. Changes over time within groups were analyzed with paired t-tests; differences between groups were analyzed with ANCOVA for repeated measurements. In the PTN group, IL-6 and CRP remained stable, whereas in the SoSu group, IL-6 increased significantly from a median value of 2.6 pg/l (min-max = 2.0-10.2) to 3.0 pg/l (min-max = 2.0-20.8), and CRP rose from 0.2 mg/dl (min-max = 0.1-0.9) to 0.3 mg/dl (min-max = 0.1-3.0) after 12 weeks. In CRP, a significant difference between groups was found. TNF-α and total leukocyte count did not change in either the PTN group or the SoSu group. Persons showing an increase in physical performance (OR 4.54; 95% CI = 1.33-15.45) were more likely to have constant or decreased IL-6 values than persons who showed no improvement. In conclusion, in non-robust older adults, a physical training and nutritional support program provided by lay volunteers can delay a further increase in some inflammatory parameters.

  15. Carbamazepine degradation using a N-doped TiO_2 coated photocatalytic membrane reactor: Influence of physical parameters

    International Nuclear Information System (INIS)

    Horovitz, Inna; Avisar, Dror; Baker, Mark A.; Grilli, Rossana; Lozzi, Luca; Di Camillo, Daniela; Mamane, Hadas

    2016-01-01

    Highlights: • UV–vis N-doped TiO_2 was deposited by sol-gel onto Al_2O_3 microfiltration membranes. • Coating decreased permeability by 50 and 12% for 200- and 800-nm Al_2O_3 membranes. • Flow through membrane results in higher reaction rates compared to flow on top. • Higher vis photocatalytic activity for N-doped TiO_2 vs. non-doped TiO_2 membranes. • Mass transfer is a critical parameter for the design of immobilized PMR. - Abstract: Commercial α-Al_2O_3 photocatalytic membranes with a pore size of 200 and 800-nm were coated with N-doped TiO_2 photocatalytic film using a sol-gel technique for concurrent bottom-up filtration and photocatalytic oxidation. X-ray diffraction confirmed that the deposited N-doped TiO_2 films are in the form of anatase with 78–84% coverage of the membrane surface. The concentration of N found by X-ray photoelectron spectroscopy was in the range of 0.3–0.9 atomic percentage. Membrane permeability after coating decreased by 50% and 12% for the 200- and 800-nm membrane substrates, respectively. The impact of operational parameters on the photocatalytic activity (PCA) of the N-doped TiO_2-coated membranes was examined in a laboratory flow cell based on degradation of the model micropollutant carbamazepine, using a solar simulator as the light source. The significant gap in degradation rate between flow through the membrane and flow on the surface of the membrane was attributed both to the hydraulic effect and in-pore PCA. N-doped TiO_2-coated membranes showed enhanced activity for UV wavelengths, in addition to activity under visible light. Experiments of PCA under varying flow rates concluded that the process is in the mass-transfer control regime. Carbamazepine removal rate increased with temperature, despite the decrease in dissolved oxygen concentration.

  16. Carbamazepine degradation using a N-doped TiO{sub 2} coated photocatalytic membrane reactor: Influence of physical parameters

    Energy Technology Data Exchange (ETDEWEB)

    Horovitz, Inna [School of Mechanical Engineering, Faculty of Engineering, Tel Aviv University, Tel Aviv 69978 (Israel); The Hydro-Chemistry Laboratory, Faculty of Geography and the Environment, Tel Aviv University, Tel Aviv 69978 (Israel); Avisar, Dror [The Hydro-Chemistry Laboratory, Faculty of Geography and the Environment, Tel Aviv University, Tel Aviv 69978 (Israel); Baker, Mark A.; Grilli, Rossana [The Surface Analysis Laboratory, Faculty of Engineering and Physical Sciences, University of Surrey, Guildford, Surrey, GU2 7XH (United Kingdom); Lozzi, Luca; Di Camillo, Daniela [Department of Physical and Chemical Sciences, University of L' Aquila, Via Vetoio, I-67100 L' Aquila (Italy); Mamane, Hadas, E-mail: hadasmg@post.tau.ac.il [School of Mechanical Engineering, Faculty of Engineering, Tel Aviv University, Tel Aviv 69978 (Israel)

    2016-06-05

    Highlights: • UV–vis N-doped TiO{sub 2} was deposited by sol-gel onto Al{sub 2}O{sub 3} microfiltration membranes. • Coating decreased permeability by 50 and 12% for 200- and 800-nm Al{sub 2}O{sub 3} membranes. • Flow through membrane results in higher reaction rates compared to flow on top. • Higher vis photocatalytic activity for N-doped TiO{sub 2} vs. non-doped TiO{sub 2} membranes. • Mass transfer is a critical parameter for the design of immobilized PMR. - Abstract: Commercial α-Al{sub 2}O{sub 3} photocatalytic membranes with a pore size of 200 and 800-nm were coated with N-doped TiO{sub 2} photocatalytic film using a sol-gel technique for concurrent bottom-up filtration and photocatalytic oxidation. X-ray diffraction confirmed that the deposited N-doped TiO{sub 2} films are in the form of anatase with 78–84% coverage of the membrane surface. The concentration of N found by X-ray photoelectron spectroscopy was in the range of 0.3–0.9 atomic percentage. Membrane permeability after coating decreased by 50% and 12% for the 200- and 800-nm membrane substrates, respectively. The impact of operational parameters on the photocatalytic activity (PCA) of the N-doped TiO{sub 2}-coated membranes was examined in a laboratory flow cell based on degradation of the model micropollutant carbamazepine, using a solar simulator as the light source. The significant gap in degradation rate between flow through the membrane and flow on the surface of the membrane was attributed both to the hydraulic effect and in-pore PCA. N-doped TiO{sub 2}-coated membranes showed enhanced activity for UV wavelengths, in addition to activity under visible light. Experiments of PCA under varying flow rates concluded that the process is in the mass-transfer control regime. Carbamazepine removal rate increased with temperature, despite the decrease in dissolved oxygen concentration.

  17. Cardiac acceleration at the onset of exercise: a potential parameter for monitoring progress during physical training in sports and rehabilitation.

    Science.gov (United States)

    Hettinga, Florentina J; Monden, Paul G; van Meeteren, Nico L U; Daanen, Hein A M

    2014-05-01

    There is a need for easy-to-use methods to assess training progress in sports and rehabilitation research. The present review investigated whether cardiac acceleration at the onset of physical exercise (HRonset) can be used as a monitoring variable. The digital databases of Scopus and PubMed were searched to retrieve studies investigating HRonset. In total 652 studies were retrieved. These articles were then classified as having emphasis on HRonset in a sports or rehabilitation setting, which resulted in 8 of 112 studies with a sports application and 6 of 68 studies with a rehabilitation application that met inclusion criteria. Two co-existing mechanisms underlie HRonset: feedforward (central command) and feedback (mechanoreflex, metaboreflex, baroreflex) control. A number of studies investigated HRonset during the first few seconds of exercise (HRonsetshort), in which central command and the mechanoreflex determine vagal withdrawal, the major mechanism by which heart rate (HR) increases. In subsequent sports and rehabilitation studies, interest focused on HRonset during dynamic exercise over a longer period of time (HRonsetlong). Central command, mechanoreflexes, baroreflexes, and possibly metaboreflexes contribute to HRonset during the first seconds and minutes of exercise, which in turn leads to further vagal withdrawal and an increase in sympathetic activity. HRonset has been described as the increase in HR compared with resting state (delta HR) or by exponential modeling, with measurement intervals ranging from 0-4 s up to 2 min. Delta HR was used to evaluate HRonsetshort over the first 4 s of exercise, as well as for analyzing HRonsetlong. In exponential modeling, the HR response to dynamic exercise is biphasic, consisting of fast (parasympathetic, 0-10 s) and slow (sympathetic, 1-4 min) components. Although available studies differed largely in measurement protocols, cross-sectional and longitudinal training studies showed that studies analyzing HRonset

  18. Relevance of transportation to correlations among criticality, physical means of propagation, and distribution of dengue fever cases in the state of Bahia.

    Science.gov (United States)

    Saba, Hugo; Moret, Marcelo A; Barreto, Florisneide R; Araújo, Marcio Luis Valença; Jorge, Eduardo Manuel F; Nascimento Filho, Aloisio S; Miranda, Jose Garcia Vivas

    2018-03-15

    Dengue infection is a public health problem with a complex distribution. The physical means of propagation and the dynamics of diffusion of the disease between municipalities need to be analysed to direct efficient public policies to prevent dengue infection. The present study presents correlations of occurrences of reported cases of dengue infection among municipalities, self-organized criticality (SOC), and transportation between areas, identifying the municipalities that play an important role in the diffusion of dengue across the state of Bahia, Brazil. The significant correlation found between the correlation network and the SOC demonstrates that the pattern of intramunicipal diffusion of dengue is coupled to the pattern of synchronisation between the municipalities. Transportation emerges as influential in the dynamics of diffusion of epidemics by acting on the aforementioned variables. Copyright © 2017 Elsevier B.V. All rights reserved.

  19. Radiation during pregnancy: physical aspects relevant to radiological safety of the fetus; Radioterapia durante a gravidez: aspectos fisicos relevantes para seguranca radiologica do feto

    Energy Technology Data Exchange (ETDEWEB)

    Fernandes, Marco A.R. [Universidade Estadual Paulista Julio de Mesquita Filho (UNESP), Botucatu, SP (Brazil). Fac. de Medicina. Dept. de Dermatologia e Radioterapia; Pasqueta, Jessica; Branco, Isabela S.L.; Meira, Luiza L.C.; Morelli, Humberto A.S., E-mail: marfernandes@fmb.unesp.br, E-mail: marco@cetea.com.br [Universidade Estadual Paulista Julio de Mesquita Filho (UNESP), Botucatu, SP (Brazil). Instituto de Biociencias

    2013-08-15

    The work presents the physical and radiological protection procedures involved in radiotherapy performed in patients during pregnancy that contribute to the security and development of the fetus. We analyzed clinical cases studies with confirmed pregnancy undergoing radiotherapy. The study also analyzed the dosimetry protocols specific to different treatment fields considering the absorbed dose in the region estimated fetal through experimental measurements and computer simulations presented in the literature. It is discussed the concepts of radiation fetuses presented in the Report of the AAPM TG 36 focusing on the influence of the use of appropriate shielding and peripheral dose distribution outside the primary radiation field. Studies show no consensus on the threshold dose for fetal exposure, with values ranging between 2 and 25 cGy, depending on gestational age and position within the abdomen. As recommended by the organs of radiological protection in Brazil, the equivalent dose of radiation to the abdomen of pregnant women occupationally exposed should not exceed 2.0 mSv for the entire period of pregnancy. The measurements show that the main factors contributing to the increase in dose to the fetus are: radiation trail head, scattering from the collimator and dispersion by tissue irradiated region to the region surrounding the fetus. The results of research and clinical situations illustrated in reviewed scientific articles indicate that radiotherapy in pregnant patients is feasible, provided that the dose to the fetus is less than the threshold values, which can be achieved by the use of screens and settings fields Radiation appropriate and properly planned by experts who should simulate physical prior to treatment. The work aims to contribute to subsidize the treatment decision in radiotherapy procedures in pregnant patients pointing out the risks and benefits when the need for treatment. (author)

  20. The effect of formulative parameters on the size and physical stability of SLN based on "green" components.

    Science.gov (United States)

    Soddu, Elena; Rassu, Giovanna; Cossu, Massimo; Giunchedi, Paolo; Cerri, Guido; Gavini, Elisabetta

    2016-01-01

    Cocoa butter (CB) is a largely used excipient in pharmaceutical field. Aim of this work was to set formulative parameters for the preparation of SLN based on "green" lipid matrix for drug delivery as natural, both human and environmental safe systems. Double emulsion technique (w1/o/w2) was selected for SLN preparation. The effect on the dimensional properties of different surfactants (Tween 80 and PEG 40 monostearate) and co-surfactants (PEG400 monostearate, Emulium® Kappa2 and Plurol®Stearique) at different concentrations was evaluated. Stability tests were performed. SLN dispersions were exsiccated and the effect of the dried process on SLN size was evaluated. The influence of temperature on SLN dimensions was investigated at 37 °C. MTT test was performed on raw materials and formulations. The w1/o/w2 is suitable, rapid and economic technique for the preparation of CB SLN. Tween 80-Plurol Stearique combination gives the best results: particles size less than 400 nm and PI of about 0.4 are obtained when PS 2% is used. Both raw materials and formulations are safe. The importance to evaluate the effect of different surfactant and/or co-surfactant on the dimensional properties of SLN is evident by selecting substances with preferable safety profiles, and favorable environmental properties to develop stable "green" SLN.

  1. Heavy Metal Contents and Physical Parameters of Aegiceras corniculatum, Brassica juncea, and Litchi chinensis Honeys from Bangladesh

    Directory of Open Access Journals (Sweden)

    Nandita Sarker

    2015-01-01

    Full Text Available The present study was undertaken to determine the heavy metal levels and the physicochemical parameters (pH, electrical conductivity (EC, and ash, moisture, and total sugar content of honeys from Bangladesh. Three different floral honeys were investigated, namely, khalsi (Aegiceras corniculatum, mustard (Brassica juncea, and litchi (Litchi chinensis honeys. The heavy metals in the honeys were determined by using a High Temperature Dry Oxidation method followed by Atomic Absorption Spectroscopy. The mean pH, EC, and ash, moisture, and total sugar contents of the investigated honeys were 3.6, 0.51 mS/cm, 0.18%, 18.83%, and 68.30%, respectively. Iron was the most abundant among all the investigated heavy metals, ranging from 13.51 to 15.44 mg/kg. The mean concentrations of Mn and Zn in the investigated honeys were 0.28 mg/kg and 2.99 mg/kg, respectively. Cd was below the detection limit, and lead was found in some honey samples, but their contents were below the recommended Maximum Acceptable Level. Cr was also found in all of the samples, but its concentration was within the limit. The physicochemical analysis of the honey samples yielded levels within the limits set by the international honey legislation, indicating that the honey samples were of good quality and had acceptable values for maturity, purity, and freshness.

  2. Hot HB Stars in Globular Clusters: Physical Parameters and Consequences for Theory. 5; Radiative Levitation Versus Helium Mixing

    Science.gov (United States)

    Moehler, S.; Sweigart, A. V.; Landsman, W. B.; Heber, U.

    2000-01-01

    Atmospheric parameters (T(sub eff), log g), masses and helium abundances are derived for 42 hot horizontal branch (HB) stars in the globular cluster NGC6752. For 19 stars we derive magnesium and iron abundances as well and find that iron is enriched by a factor of 50 on average with respect to the cluster abundance whereas the magnesium abundances are consistent with the cluster abundance. Radiation pressure may levitate heavy elements like iron to the surface of the star in a diffusive process. Taking into account the enrichment of heavy elements in our spectroscopic analyses we find that high iron abundances can explain part, but not all, of the problem of anomalously low gravities along the blue HB. The blue HB stars cooler than about 15,100 K and the sdB stars (T(sub eff) greater than or = 20,000 K) agree well with canonical theory when analysed with metal-rich ([M/H] = +0.5) model atmospheres, but the stars in between these two groups remain offset towards lower gravities and masses. Deep Mixing in the red giant progenitor phase is discussed as another mechanism that may influence the position of the blue HB stars in the (T(sub eff), log g)-plane but not their masses.

  3. A review of the influence of physical condition parameters on a typical aerospace stress effect: Decompression sickness

    Science.gov (United States)

    West, V. R.; Parker, J. F., Jr.

    1973-01-01

    The study examines data on episodes of decompression sickness, particularly from recent Navy work in which the event occurred under multiple stress conditions, to determine the extent to which decompression sickness might be predicted on the basis of personal characteristics such as age, weight, and physical condition. Such information should ultimately be useful for establishing medical selection criteria to screen individuals prior to participation inactivities involving extensive changes in ambient pressure, including those encountered in space operations. The main conclusions were as follows. There is a definite and positive relationship between increasing age and weight and the likelihood of decompression sickness. However, for predictive purposes, the relationship is low. To reduce the risk of bends, particularly for older individuals, strenuous exercise should be avoided immediately after ambient pressure changes. Temperatures should be kept at the low end of the comfort zone. For space activities, pressure changes of over 6-7 psi should be avoided. Prospective participants in future missions such as the Space Shuttle should not be excluded on the basis of age, certainly to age 60, if their general condition is reasonably good and they are not grossly obese. (Modified author abstract)

  4. Does small-sided-games’ court area influence metabolic, perceptual, and physical performance parameters of young elite basketball players?

    Science.gov (United States)

    Marcelino, PR; Aoki, MS; Arruda, AFS; Freitas, CG; Mendez-Villanueva, A

    2015-01-01

    The purpose of this study was to investigate the effect of court size on physiological responses and physical performance of young elite basketball players. Twelve male basketball players (18.6 ± 0.5 years; 88.8 ± 14.5 kg; 192.6 ± 6.5 cm) from an under-19 team performed two small-sided games (matches) with different court areas (28x15 m and 28x9 m; 28x15 and 28x9 protocols). The number of players (3x3) was kept the same in each protocol. The players performed a repeated-sprint ability (RSA) test before and after each match. Blood lactate concentration was collected before (pre) and after (post) the matches, and the session rating of perceived exertion (session-RPE) was determined 30 minutes after the match. Best and mean time in the RSA test were not different between the 28x15 and the 28x9 match protocols (p > 0.05). A significant difference was observed for lactate concentration from pre- to post-match (p 0.05, ES=0.41). In summary, the results of the current study suggest that the different court areas induced similar responses. Although there was no significant difference in effort perception, players tended to perceive a greater effort in the larger court size. PMID:26985132

  5. A data-driven and physics-based single-pass retrieval of active-passive microwave covariation and vegetation parameters for the SMAP mission

    Science.gov (United States)

    Entekhabi, D.; Jagdhuber, T.; Das, N. N.; Baur, M.; Link, M.; Piles, M.; Akbar, R.; Konings, A. G.; Mccoll, K. A.; Alemohammad, S. H.; Montzka, C.; Kunstmann, H.

    2016-12-01

    The active-passive soil moisture retrieval algorithm of NASA's SMAP mission depends on robust statistical estimation of active-passive covariation (β) and vegetation structure (Γ) parameters in order to provide reliable global measurements of soil moisture on an intermediate level (9km) compared to the native resolution of the radiometer (36km) and radar (3km) instruments. These parameters apply to the SMAP radiometer-radar combination over the period of record that was cut short with the end of the SMAP radar transmission. They also apply to the current SMAP radiometer and Sentinel 1A/B radar combination for high-resolution surface soil moisture mapping. However, the performance of the statistically-based approach is directly dependent on the selection of a representative time frame in which these parameters can be estimated assuming dynamic soil moisture and stationary soil roughness and vegetation cover. Here, we propose a novel, data-driven and physics-based single-pass retrieval of active-passive microwave covariation and vegetation parameters for the SMAP mission. The algorithm does not depend on time series analyses and can be applied using minimum one pair of an active-passive acquisition. The algorithm stems from the physical link between microwave emission and scattering via conservation of energy. The formulation of the emission radiative transfer is combined with the Distorted Born Approximation of radar scattering for vegetated land surfaces. The two formulations are simultaneously solved for the covariation and vegetation structure parameters. Preliminary results from SMAP active-passive observations (April 13th to July 7th 2015) compare well with the time-series statistical approach and confirms the capability of this method to estimate these parameters. Moreover, the method is not restricted to a given frequency (applies to both L-band and C-band combinations for the radar) or incidence angle (all angles and not just the fixed 40° incidence

  6. PHYSICS

    CERN Multimedia

    Darin Acosta

    2010-01-01

    The collisions last year at 900 GeV and 2.36 TeV provided the long anticipated collider data to the CMS physics groups. Quite a lot has been accomplished in a very short time. Although the delivered luminosity was small, CMS was able to publish its first physics paper (with several more in preparation), and commence the commissioning of physics objects for future analyses. Many new performance results have been approved in advance of this CMS Week. One remarkable outcome has been the amazing agreement between out-of-the-box data with simulation at these low energies so early in the commissioning of the experiment. All of this is testament to the hard work and preparation conducted beforehand by many people in CMS. These analyses could not have happened without the dedicated work of the full collaboration on building and commissioning the detector, computing, and software systems combined with the tireless work of many to collect, calibrate and understand the data and our detector. To facilitate the efficien...

  7. PHYSICS

    CERN Multimedia

    the PAG conveners

    2011-01-01

    The delivered LHC integrated luminosity of more than 1 inverse femtobarn by summer and more than 5 by the end of 2011 has been a gold mine for the physics groups. With 2011 data, we have submitted or published 14 papers, 7 others are in collaboration-wide review, and 75 Physics Analysis Summaries have been approved already. They add to the 73 papers already published based on the 2010 and 2009 datasets. Highlights from each physics analysis group are described below. Heavy ions Many important results have been obtained from the first lead-ion collision run in 2010. The published measurements include the first ever indications of Υ excited state suppression (PRL synopsis), long-range correlation in PbPb, and track multiplicity over a wide η range. Preliminary results include the first ever measurement of isolated photons (showing no modification), J/ψ suppression including the separation of the non-prompt component, further study of jet fragmentation, nuclear modification factor...

  8. PHYSICS

    CERN Multimedia

    L. Demortier

    Physics-wise, the CMS week in December was dominated by discussions of the analyses that will be carried out in the “next six months”, i.e. while waiting for the first LHC collisions.  As presented in December, analysis approvals based on Monte Carlo simulation were re-opened, with the caveat that for this work to be helpful to the goals of CMS, it should be carried out using the new software (CMSSW_2_X) and associated samples.  By the end of the week, the goal for the physics groups was set to be the porting of our physics commissioning methods and plans, as well as the early analyses (based an integrated luminosity in the range 10-100pb-1) into this new software. Since December, the large data samples from CMSSW_2_1 were completed. A big effort by the production group gave a significant number of events over the end-of-year break – but also gave out the first samples with the fast simulation. Meanwhile, as mentioned in December, the arrival of 2_2 meant that ...

  9. PHYSICS

    CERN Multimedia

    C. Hill

    2012-01-01

      2012 has started off as a very busy year for the CMS Physics Groups. Planning for the upcoming higher luminosity/higher energy (8 TeV) operation of the LHC and relatively early Rencontres de Moriond are the high-priority activities for the group at the moment. To be ready for the coming 8-TeV data, CMS has made a concerted effort to perform and publish analyses on the 5 fb−1 dataset recorded in 2011. This has resulted in the submission of 16 papers already, including nine on the search for the Higgs boson. In addition, a number of preliminary results on the 2011 dataset have been released to the public. The Exotica and SUSY groups approved several searches for new physics in January, such as searches for W′ and exotic highly ionising particles. These were highlighted at a CERN seminar given on 24th  January. Many more analyses, from all the PAGs, including the newly formed SMP (Standard Model Physics) and FSQ (Forward and Small-x QCD), were approved in February. The ...

  10. PHYSICS

    CERN Document Server

    C. Hill

    2012-01-01

      The period since the last CMS Bulletin has been historic for CMS Physics. The pinnacle of our physics programme was an observation of a new particle – a strong candidate for a Higgs boson – which has captured worldwide interest and made a profound impact on the very field of particle physics. At the time of the discovery announcement on 4 July, 2012, prominent signals were observed in the high-resolution H→γγ and H→ZZ(4l) modes. Corroborating excess was observed in the H→W+W– mode as well. The fermionic channel analyses (H→bb, H→ττ), however, yielded less than the Standard Model (SM) expectation. Collectively, the five channels established the signal with a significance of five standard deviations. With the exception of the diphoton channel, these analyses have all been updated in the last months and several new channels have been added. With improved analyses and more than twice the i...

  11. Biological and physical modification of carbonate system parameters along the salinity gradient in shallow hypersaline solar salterns in Trapani, Italy

    Science.gov (United States)

    Isaji, Yuta; Kawahata, Hodaka; Kuroda, Junichiro; Yoshimura, Toshihiro; Ogawa, Nanako O.; Suzuki, Atsushi; Shibuya, Takazo; Jiménez-Espejo, Francisco J.; Lugli, Stefano; Santulli, Andrea; Manzi, Vinicio; Roveri, Marco; Ohkouchi, Naohiko

    2017-07-01

    We investigated changes in the chemical characteristics of evaporating seawater under the influence of microbial activity by conducting geochemical analyses of the brines and evaporite sediments collected from solar salterns in Trapani, Italy. The microbial activity had a substantial effect on the carbonate system parameters. Dissolved inorganic carbon (DIC) was substantially removed from the brine during the course of evaporation from the seawater to the point where calcium carbonate precipitates, with an accompanying decrease in its carbon isotopic composition (δ13CDIC) to as low as -10.6‰. Although the removal of DIC was due to calcium carbonate precipitation, photosynthesis, and the degassing of CO2(aq) induced by evaporation, the presence of 13C-depleted δ13CDIC in ponds where calcium carbonate precipitates can be attributed to the dissolution of atmospheric CO2 because of intensive CO2(aq) uptake by photosynthesis, and/or mineralization of organic matter by sulfate reduction. In contrast, δ13CDIC increased up to 7.2‰ in the salinity range where halite precipitates, which can be ascribed to the domination of the effect of degassing of CO2(aq) under conditions with reduced microbial activity. A gradual decrease in microbial activity was also reflected in compound-specific δ13C of photosynthetic pigments; isotopic fractionation associated with DIC assimilation increased linearly as the evaporation proceeded, indicating DIC-limited conditions within the microbial mats and gypsum crusts because of restricted DIC diffusion from the overlying brine and/or suppression of primary production at higher salinity.

  12. Physical effects of mechanical design parameters on photon sensitivity and spatial resolution performance of a breast-dedicated PET system.

    Science.gov (United States)

    Spanoudaki, V C; Lau, F W Y; Vandenbroucke, A; Levin, C S

    2010-11-01

    This study aims to address design considerations of a high resolution, high sensitivity positron emission tomography scanner dedicated to breast imaging. The methodology uses a detailed Monte Carlo model of the system structures to obtain a quantitative evaluation of several performance parameters. Special focus was given to the effect of dense mechanical structures designed to provide mechanical robustness and thermal regulation to the minuscule and temperature sensitive detectors. For the energies of interest around the photopeak (450-700 keV energy window), the simulation results predict a 6.5% reduction in the single photon detection efficiency and a 12.5% reduction in the coincidence photon detection efficiency in the case that the mechanical structures are interspersed between the detectors. However for lower energies, a substantial increase in the number of detected events (approximately 14% and 7% for singles at a 100-200 keV energy window and coincidences at a lower energy threshold of 100 keV, respectively) was observed with the presence of these structures due to backscatter. The number of photon events that involve multiple interactions in various crystal elements is also affected by the presence of the structures. For photon events involving multiple interactions among various crystal elements, the coincidence photon sensitivity is reduced by as much as 20% for a point source at the center of the field of view. There is no observable effect on the intrinsic and the reconstructed spatial resolution and spatial resolution uniformity. Mechanical structures can have a considerable effect on system sensitivity, especially for systems processing multi-interaction photon events. This effect, however, does not impact the spatial resolution. Various mechanical structure designs are currently under evaluation in order to achieve optimum trade-off between temperature stability, accurate detector positioning, and minimum influence on system performance.

  13. Some feature of interpretation of tension single pulsed electromagnetic field of the Earth to create the model parameter fields physical properties

    Directory of Open Access Journals (Sweden)

    Mokritskaya T.P.

    2014-12-01

    Full Text Available Stochastic analysis of the results of different methods of obtaining and processing of information allows us to solve problems on a qualitatively different level. This is important when creating complex earth models and fields of its parameters, particularly the physical properties. Application of remote sensing methods (geophysical investigations with the registration of a single pulse intensity of the electromagnetic field of the Earth (EIEMPZ seismic profiling, is expanding. Interesting results of the joint interpretation of the results of geophysical and laboratory studies of physical soil. Interesting results of the joint interpretation of the results of geophysical and laboratory studies of physical soil. For the first time a methodology for assessing the state of the soil [3] applied for a joint interpretation of materials determine the field strength EMPZ, seismic profiling, and laboratory techniques. This has allowed to characterize the state of the geological environment and to build a model of inhomogeneous density distribution of fractured rocks at depth. In this paper we made a mathematical analysis of the results of research and talus deposits eluvial clay Taurian series, studied at one of the construction sites southern coast at a depth of 12.0 -25.0 m. Methods of statistical analysis, assessment of homogeneity and symmetrically distributed, rank correlation and multiple regression analysis described in [3]. The analysis of the spatial distribution of areas extrem value of EMPZ, heterogeneity of seismic rigidity. Statistical characteristics of indicators of physical properties reflect the genetic characteristics of the formation and the current state of silty-clay sediments of different genesis.It is proved that the regression model can be applied to interpret the state of the array in the construction of geodynamic model. It is established that the creation of forward-looking (dynamic models for the distribution of the physical

  14. Microstructural dependence on relevant physical-mechanical properties on SiO2-Na2O-CaO-P2O5 biological glasses.

    Science.gov (United States)

    Rajendran, V; Begum, A Nishara; Azooz, M A; el Batal, F H

    2002-11-01

    Bioactive glasses of the system SiO2-Na2O-CaO-P2O5 have been prepared by the normal melting and annealing technique. The elastic moduli, attenuation, Vickers hardness, fracture toughness and fracture surface energy have been obtained using the known method at room temperature. The temperature dependence of elastic moduli and attenuation measurements have been extended over a wide range of temperature from 150 to 500 K. The SiO2 content dependence of velocities, attenuation, elastic moduli, and other parameters show an interesting observation at 45 wt% of SiO2 by exhibiting an anomalous behaviour. A linear relation is developed for Tg, which explores the influence of Na2O on SiO2-Na2O-CaO-P2O5 bioactive glasses. The measured hardness, fracture toughness and fracture surface energy show a linear relation with Young's modulus. It is also interesting to note that the observed results are functions of polymerisation and the number of non-bridging oxygens (NBO) prevailing in the network with change in SiO2 content. The temperature dependence of velocities, attenuation and elastic moduli show the existence of softening in the glass network structure as temperature increases.

  15. Combining Physical and Biologic Parameters to Predict Radiation-Induced Lung Toxicity in Patients With Non-Small-Cell Lung Cancer Treated With Definitive Radiation Therapy

    Energy Technology Data Exchange (ETDEWEB)

    Stenmark, Matthew H. [Department of Radiation Oncology, University of Michigan Medical Center, Ann Arbor, Michigan (United States); Cai Xuwei [Department of Radiation Oncology, University of Michigan Medical Center, Ann Arbor, Michigan (United States); Radiation Oncology, Shanghai Cancer Hospital, Fudan University, Shanghai (China); Shedden, Kerby [Department of Biostatistics, University of Michigan Medical Center, Ann Arbor, Michigan (United States); Hayman, James A. [Department of Radiation Oncology, University of Michigan Medical Center, Ann Arbor, Michigan (United States); Yuan Shuanghu [Department of Radiation Oncology, University of Michigan Medical Center, Ann Arbor, Michigan (United States); Radiation Oncology, Shangdong Cancer Hospital, Jinan (China); Ritter, Timothy [Veterans Affairs Medical Center, Ann Arbor, Michigan (United States); Ten Haken, Randall K.; Lawrence, Theodore S. [Department of Radiation Oncology, University of Michigan Medical Center, Ann Arbor, Michigan (United States); Kong Fengming, E-mail: fengkong@med.umich.edu [Department of Radiation Oncology, University of Michigan Medical Center, Ann Arbor, Michigan (United States); Veterans Affairs Medical Center, Ann Arbor, Michigan (United States)

    2012-10-01

    Purpose: To investigate the plasma dynamics of 5 proinflammatory/fibrogenic cytokines, including interleukin-1beta (IL-1{beta}), IL-6, IL-8, tumor necrosis factor alpha (TNF-{alpha}), and transforming growth factor beta1 (TGF-{beta}1) to ascertain their value in predicting radiation-induced lung toxicity (RILT), both individually and in combination with physical dosimetric parameters. Methods and Materials: Treatments of patients receiving definitive conventionally fractionated radiation therapy (RT) on clinical trial for inoperable stages I-III lung cancer were prospectively evaluated. Circulating cytokine levels were measured prior to and at weeks 2 and 4 during RT. The primary endpoint was symptomatic RILT, defined as grade 2 and higher radiation pneumonitis or symptomatic pulmonary fibrosis. Minimum follow-up was 18 months. Results: Of 58 eligible patients, 10 (17.2%) patients developed RILT. Lower pretreatment IL-8 levels were significantly correlated with development of RILT, while radiation-induced elevations of TGF-ss1 were weakly correlated with RILT. Significant correlations were not found for any of the remaining 3 cytokines or for any clinical or dosimetric parameters. Using receiver operator characteristic curves for predictive risk assessment modeling, we found both individual cytokines and dosimetric parameters were poor independent predictors of RILT. However, combining IL-8, TGF-ss1, and mean lung dose into a single model yielded an improved predictive ability (P<.001) compared to either variable alone. Conclusions: Combining inflammatory cytokines with physical dosimetric factors may provide a more accurate model for RILT prediction. Future study with a larger number of cases and events is needed to validate such findings.

  16. Transformation of Physical DVHs to Radiobiologically Equivalent Ones in Hypofractionated Radiotherapy Analyzing Dosimetric and Clinical Parameters: A Practical Approach for Routine Clinical Practice in Radiation Oncology

    Directory of Open Access Journals (Sweden)

    Zoi Thrapsanioti

    2013-01-01

    Full Text Available Purpose. The purpose of this study was to transform DVHs from physical to radiobiological ones as well as to evaluate their reliability by correlations of dosimetric and clinical parameters for 50 patients with prostate cancer and 50 patients with breast cancer, who were submitted to Hypofractionated Radiotherapy. Methods and Materials. To achieve this transformation, we used both the linear-quadratic model (LQ model and the Niemierko model. The outcome of radiobiological DVHs was correlated with acute toxicity score according to EORTC/RTOG criteria. Results. Concerning the prostate radiotherapy, there was a significant correlation between RTOG acute rectal toxicity and ( and ( dosimetric parameters, calculated for  Gy. Moreover, concerning the breast radiotherapy there was a significant correlation between RTOG skin toxicity and dosimetric parameter, calculated for both  Gy ( and  Gy (. The new tool seems reliable and user-friendly. Conclusions. Our proposed model seems user-friendly. Its reliability in terms of agreement with the presented acute radiation induced toxicity was satisfactory. However, more patients are needed to extract safe conclusions.

  17. A Research on the Chronic Effects of Training at High Altitude on Some Physical Characteristics and Some Blood Parameters of the Students from Kastamonu School of Physical Education and Sports

    Directory of Open Access Journals (Sweden)

    İsmail Kaya

    2015-10-01

    Full Text Available The purpose of this study was to compare the alternations of physical performance, some blood parameters, pulse and blood pressure of male student athletes from Kastamonu School of Physical Education and Sports. 15 student athletes volunteered for the study. The sampling group trained for two hours between 9.00-11.00 a.m. The sampling groups’ RBC, WBC, Hb, HCT, resting systolic blood pressure, resting diastolic blood pressure, resting heart rate and aerobic and anaerobic values on the fifteenth day at high altitude (3250 m and on the seventh day after returning sea level were measured. T- test was used as a statistical method and significance level was determined as (P0.05. The results suggest that athletes who trained at high altitude should be supplied by vitamin and minerals, they should sleep and rest regularly, they shouldn't make any exercise which can cause to lactic acid accumulation.

  18. Call to Adopt a Nominal Set of Astrophysical Parameters and Constants to Improve the Accuracy of Fundamental Physical Properties of Stars

    Science.gov (United States)

    Harmanec, Petr; Prša, Andrej

    2011-08-01

    The increasing precision of astronomical observations of stars and stellar systems is gradually getting to a level where the use of slightly different values of the solar mass, radius, and luminosity, as well as different values of fundamental physical constants, can lead to measurable systematic differences in the determination of basic physical properties. An equivalent issue with an inconsistent value of the speed of light was resolved by adopting a nominal value that is constant and has no error associated with it. Analogously, we suggest that the systematic error in stellar parameters may be eliminated by (1) replacing the solar radius R⊙ and luminosity L⊙ by the nominal values that are by definition exact and expressed in SI units: and ; (2) computing stellar masses in terms of M⊙ by noting that the measurement error of the product GM⊙ is 5 orders of magnitude smaller than the error in G; (3) computing stellar masses and temperatures in SI units by using the derived values and ; and (4) clearly stating the reference for the values of the fundamental physical constants used. We discuss the need and demonstrate the advantages of such a paradigm shift.

  19. Change of physical and chemical parameters of fulvic acids at different pH of the system

    Science.gov (United States)

    Dinu, Marina; Kremleva, Tatyana

    2017-04-01

    Organic substances of humic nature significantly change physicochemical properties at different pH of natural waters. As a consequence, a large number of consecutive and parallel reactions in the structure of organic polymers, and reacting with inorganic anions. The main indicators of changes in the properties of organic acids in natural systems are changes in their IR spectra, changes in the colloid stability (the zeta potential) as well as in the molecular weight and emission spectra (fluorescence emission spectra). The aim of our study was to evaluate of changing in physical and chemical properties of the fulvic acid from soil/water samples in the natural areas of European Russia and Western Siberia (the steppe and the northern taiga zones) at different pH (from 8 to 1.5). Changes in absorption bands of fulvic acid caused by both COOH groups and amino groups with varying degrees of protonation were found. Consequently, we can assume that in an electric field fulvic acid change the sign of their charge at depending on pH. During the lowering of the pH intensity of C-O bands generally decreases, while in the region 1590 cm-1 disappears. In turn, the band at 1700 cm-1 is the most intense; it could mean a complete protonation of the carboxyl groups. According to our data, the values of zeta potential changes depending on pH of the system. The zeta potential becomes more negative with increasing pH and it may be due to ionization of oxygen groups of fulvic acid. For the colloidal polymer systems the value of the zeta potential is strongly negative (less than -20 mV) and strongly positive (over 20 mV) characterize the system as the most stable. Our experimental data for the study of the zeta potential of fulvic acids extracted from the soils and waters of different climatic zones show zonal influence of the qualitative characteristics of organic substances on the surface charge of the high-molecular micelle of fulvic acids. It was found that fulvic acids extracted

  20. Physically-based slope stability modelling and parameter sensitivity: a case study in the Quitite and Papagaio catchments, Rio de Janeiro, Brazil

    Science.gov (United States)

    de Lima Neves Seefelder, Carolina; Mergili, Martin

    2016-04-01

    conservative than those yielded with the infinite slope stability model. The sensitivity of AUCROC to variations in the geohydraulic parameters remains small as long as the calculated degree of saturation of the soils is sufficient to result in the prediction of a significant amount of landslide release pixels. Due to the poor sensitivity of AUCROC to variations of the geotechnical and geohydraulic parameters it is hard to optimize the parameters by means of statistics. Instead, the results produced with many different combinations of parameters correspond reasonably well with the distribution of the observed landslide release areas, even though they vary considerably in terms of their conservativeness. Considering the uncertainty inherent in all geotechnical and geohydraulic data, and the impossibility to capture the spatial distribution of the parameters by means of laboratory tests in sufficient detail, we conclude that landslide susceptibility maps yielded by catchment-scale physically-based models should not be interpreted in absolute terms. Building on the assumption that our findings are generally valid, we suggest that efforts to develop better strategies for dealing with the uncertainties in the spatial variation of the key parameters should be given priority in future slope stability modelling efforts.

  1. PHYSICS

    CERN Multimedia

    J. D'Hondt

    The Electroweak and Top Quark Workshop (16-17th of July) A Workshop on Electroweak and Top Quark Physics, dedicated on early measurements, took place on 16th-17th July. We had more than 40 presentations at the Workshop, which was an important milestone for 2007 physics analyses in the EWK and TOP areas. The Standard Model has been tested empirically by many previous experiments. Observables which are nowadays known with high precision will play a major role for data-based CMS calibrations. A typical example is the use of the Z to monitor electron and muon reconstruction in di-lepton inclusive samples. Another example is the use of the W mass as a constraint for di-jets in the kinematic fitting of top-quark events, providing information on the jet energy scale. The predictions of the Standard Model, for what concerns proton collisions at the LHC, are accurate to a level that the production of W/Z and top-quark events can be used as a powerful tool to commission our experiment. On the other hand the measure...

  2. PHYSICS

    CERN Multimedia

    Christopher Hill

    2013-01-01

    Since the last CMS Bulletin, the CMS Physics Analysis Groups have completed more than 70 new analyses, many of which are based on the complete Run 1 dataset. In parallel the Snowmass whitepaper on projected discovery potential of CMS for HL-LHC has been completed, while the ECFA HL-LHC future physics studies has been summarised in a report and nine published benchmark analyses. Run 1 summary studies on b-tag and jet identification, quark-gluon discrimination and boosted topologies have been documented in BTV-13-001 and JME-13-002/005/006, respectively. The new tracking alignment and performance papers are being prepared for submission as well. The Higgs analysis group produced several new results including the search for ttH with H decaying to ZZ, WW, ττ+bb (HIG-13-019/020) where an excess of ~2.5σ is observed in the like-sign di-muon channel, and new searches for high-mass Higgs bosons (HIG-13-022). Search for invisible Higgs decays have also been performed both using the associ...

  3. PHYSICS

    CERN Multimedia

    C. Hill

    2013-01-01

    In the period since the last CMS Bulletin, the LHC – and CMS – have entered LS1. During this time, CMS Physics Analysis Groups have performed more than 40 new analyses, many of which are based on the complete 8 TeV dataset delivered by the LHC in 2012 (and in some cases on the full Run 1 dataset). These results were shown at, and well received by, several high-profile conferences in the spring of 2013, including the inaugural meeting of the Large Hadron Collider    Physics Conference (LHCP) in Barcelona, and the 26th International Symposium on Lepton Photon Interactions at High Energies (LP) in San Francisco. In parallel, there have been significant developments in preparations for Run 2 of the LHC and on “future physics” studies for both Phase 1 and Phase 2 upgrades of the CMS detector. The Higgs analysis group produced five new results for LHCP including a new H-to-bb search in VBF production (HIG-13-011), ttH with H to γ&ga...

  4. PHYSICS

    CERN Multimedia

    C. Hill

    2013-01-01

    The period since the last CMS bulletin has seen the end of proton collisions at a centre-of-mass energy 8 TeV, a successful proton-lead collision run at 5 TeV/nucleon, as well as a “reference” proton run at 2.76 TeV. With these final LHC Run 1 datasets in hand, CMS Physics Analysis Groups have been busy analysing these data in preparation for the winter conferences. Moreover, despite the fact that the pp run only concluded in mid-December (and there was consequently less time to complete data analyses), CMS again made a strong showing at the Rencontres de Moriond in La Thuile (EW and QCD) where nearly 40 new results were presented. The highlight of these preliminary results was the eagerly anticipated updated studies of the properties of the Higgs boson discovered in July of last year. Meanwhile, preparations for Run 2 and physics performance studies for Phase 1 and Phase 2 upgrade scenarios are ongoing. The Higgs analysis group produced updated analyses on the full Run 1 dataset (~25 f...

  5. An observatory system for physical and biogeochemical parameters in the northern Adriatic Sea: the "Acqua Alta" oceanographic platform

    Science.gov (United States)

    Benetazzo, Alvise; Barbariol, Francesco; Bastianini, Mauro; Bergamasco, Andrea; Bergamasco, Filippo; Bernardi Aubry, Fabrizio; Bertotti, Luciana; Bonaldo, Davide; Cavaleri, Luigi; Carniel, Sandro; Falcieri, Francesco M.; Finotto, Stefania; Lester, Graham; Licer, Matjaz; Malacic, Vlado; Minuzzo, Tiziano; Sclavo, Mauro

    2015-04-01

    The history of the "Acqua Alta" oceanographic platform (http://www.ismar.cnr.it/infrastructures/piattaforma-acqua-alta) started more than forty years ago, shortly after the dramatic surge that affected the city of Venice in late 1966. Since then, benefiting also from recent funding acquired within the National Flagship Project RITMARE, great efforts have been devoted to monitor the oceanographic and atmospheric conditions in the Northern Adriatic Sea (NA), in the proximity of the Venice lagoon. Nowadays the "Acqua Alta", located on a 16 m depth area, represents a success story of the Institute of Marine Sciences (ISMAR) of the Italian National Research Council (CNR), that manages the structure and used collected data to improve the knowledge of the fragile sea environment that surrounds the Venetian littoral. The directional wave observations started in 1979, representing one of the world longest continuous series. On the sea surface, waves are now routinely observed by means of a submerged acoustic-Doppler system that provides burst of directional wave data, including significant wave height, mean wave period and direction of propagation. Currently these wave parameters are integrated with the data collected by a stereo-video system (namely Wave Acquisition Stereo System, WASS) that provides the 3-D profile of the wavy sea surface. WASS data are unleashing a "new view" for ocean waves providing the complete space-time dynamics of wave groups. Moreover, a series of multiparameters probes permits to measure the vertical distribution of sea temperature (at nine depths from the surface to the bottom), salinity (three positions), dissolved oxygen (two positions), and turbidity close to the sea bottom. The collected data are continuously used to track the water masses that enter, leave, and are produced within the NA. A striking example is provided by the temperature and salinity data used to follow the exceptional dense water formation that occurred in this basin

  6. Why relevance theory is relevant for lexicography

    DEFF Research Database (Denmark)

    Bothma, Theo; Tarp, Sven

    2014-01-01

    This article starts by providing a brief summary of relevance theory in information science in relation to the function theory of lexicography, explaining the different types of relevance, viz. objective system relevance and the subjective types of relevance, i.e. topical, cognitive, situational...... that is very important for lexicography as well as for information science, viz. functional relevance. Since all lexicographic work is ultimately aimed at satisfying users’ information needs, the article then discusses why the lexicographer should take note of all these types of relevance when planning a new...... dictionary project, identifying new tasks and responsibilities of the modern lexicographer. The article furthermore discusses how relevance theory impacts on teaching dictionary culture and reference skills. By integrating insights from lexicography and information science, the article contributes to new...

  7. Interaction between cytokine gene polymorphisms and the effect of physical exercise on clinical and inflammatory parameters in older women: study protocol for a randomized controlled trial.

    Science.gov (United States)

    Pereira, Daniele S; Queiroz, Bárbara Z; Mateo, Elvis C C; Assumpção, Alexandra M; Felício, Diogo C; Miranda, Aline S; Anjos, Daniela M C; Jesus-Moraleida, Fabianna; Dias, Rosângela C; Pereira, Danielle A G; Teixeira, Antônio L; Pereira, Leani S M

    2012-08-08

    Aging is associated with chronic low-grade inflammatory activity with an elevation of cytokine levels. An association between regular physical activity and reduction of blood levels of anti-inflammatory cytokines is demonstrated in the literature pointing to an anti-inflammatory effect related to exercise. However, there is no consensus regarding which type of exercise and which parameters are the most appropriate to influence inflammatory markers. Evidence indicates that the single nucleotide polymorphism (SNP) can influence the synthesis of those cytokines affecting their production. The design of this study is a randomized controlled trial. The aim of this study is to investigate the interaction between the cytokine genes SNP and the effect of physical activity on older women. The main outcomes are: serum levels of sTNFR-1, sTNFR-2, interleukin (IL)-6, IL-10, measured by the ELISA method; genotyping of tumor necrosis factor- (TNF)-alpha (rs1800629), IL6 (rs1800795), IL10 (rs1800896) by the TaqMan Method (Applied Biosystems, Foster City, CA, USA); and physical performance assessed by Timed Up and Go and 10-Meter Walk Tests. Secondary outcomes include: Geriatric Depression Scale, Perceived Stress Scaleand aerobic capacity, assessed by the six-minute walk; and lower limb muscle strength, using an isokinetic dinamometer (Biodex Medical Systems, Inc., Shirley, NY,USA). Both exercise protocols will be performed three times a week for 10 weeks, 30 sessions in total. Investigating the interaction between genetic factors and exercise effects of both protocols of exercise on the levels of inflammatory cytokine levels can contribute to guide clinical practice related to treatment and prevention of functional changes due to chronic inflammatory activity in older adults. This approach could develop new perspectives on preventive and treatment proposals in physical therapy and in the management of the older patient. (ReBEC) RBR9v9cwf.

  8. Interaction between cytokine gene polymorphisms and the effect of physical exercise on clinical and inflammatory parameters in older women: study protocol for a randomized controlled trial

    Directory of Open Access Journals (Sweden)

    Pereira Daniele S

    2012-08-01

    Full Text Available Abstract Background Aging is associated with chronic low-grade inflammatory activity with an elevation of cytokine levels. An association between regular physical activity and reduction of blood levels of anti-inflammatory cytokines is demonstrated in the literature pointing to an anti-inflammatory effect related to exercise. However, there is no consensus regarding which type of exercise and which parameters are the most appropriate to influence inflammatory markers. Evidence indicates that the single nucleotide polymorphism (SNP can influence the synthesis of those cytokines affecting their production. Methods/Design The design of this study is a randomized controlled trial. The aim of this study is to investigate the interaction between the cytokine genes SNP and the effect of physical activity on older women. The main outcomes are: serum levels of sTNFR-1, sTNFR-2, interleukin (IL-6, IL-10, measured by the ELISA method; genotyping of tumor necrosis factor- (TNF-alpha (rs1800629, IL6 (rs1800795, IL10 (rs1800896 by the TaqMan Method (Applied Biosystems, Foster City, CA, USA; and physical performance assessed by Timed Up and Go and 10-Meter Walk Tests. Secondary outcomes include: Geriatric Depression Scale, Perceived Stress Scaleand aerobic capacity, assessed by the six-minute walk; and lower limb muscle strength, using an isokinetic dinamometer (Biodex Medical Systems, Inc., Shirley, NY,USA. Both exercise protocols will be performed three times a week for 10 weeks, 30 sessions in total. Discussion Investigating the interaction between genetic factors and exercise effects of both protocols of exercise on the levels of inflammatory cytokine levels can contribute to guide clinical practice related to treatment and prevention of functional changes due to chronic inflammatory activity in older adults. This approach could develop new perspectives on preventive and treatment proposals in physical therapy and in the management of the older patient

  9. LOW-MASS GALAXY FORMATION IN COSMOLOGICAL ADAPTIVE MESH REFINEMENT SIMULATIONS: THE EFFECTS OF VARYING THE SUB-GRID PHYSICS PARAMETERS

    International Nuclear Information System (INIS)

    ColIn, Pedro; Vazquez-Semadeni, Enrique; Avila-Reese, Vladimir; Valenzuela, Octavio; Ceverino, Daniel

    2010-01-01

    We present numerical simulations aimed at exploring the effects of varying the sub-grid physics parameters on the evolution and the properties of the galaxy formed in a low-mass dark matter halo (∼7 x 10 10 h -1 M sun at redshift z = 0). The simulations are run within a cosmological setting with a nominal resolution of 218 pc comoving and are stopped at z = 0.43. For simulations that cannot resolve individual molecular clouds, we propose the criterion that the threshold density for star formation, n SF , should be chosen such that the column density of the star-forming cells equals the threshold value for molecule formation, N ∼ 10 21 cm -2 , or ∼8 M sun pc -2 . In all of our simulations, an extended old/intermediate-age stellar halo and a more compact younger stellar disk are formed, and in most cases, the halo's specific angular momentum is slightly larger than that of the galaxy, and sensitive to the SF/feedback parameters. We found that a non-negligible fraction of the halo stars are formed in situ in a spheroidal distribution. Changes in the sub-grid physics parameters affect significantly and in a complex way the evolution and properties of the galaxy: (1) lower threshold densities n SF produce larger stellar effective radii R e , less peaked circular velocity curves V c (R), and greater amounts of low-density and hot gas in the disk mid-plane; (2) when stellar feedback is modeled by temporarily switching off radiative cooling in the star-forming regions, R e increases (by a factor of ∼2 in our particular model), the circular velocity curve becomes flatter, and a complex multi-phase gaseous disk structure develops; (3) a more efficient local conversion of gas mass to stars, measured by a stellar particle mass distribution biased toward larger values, increases the strength of the feedback energy injection-driving outflows and inducing burstier SF histories; (4) if feedback is too strong, gas loss by galactic outflows-which are easier to produce in low

  10. Alcohol dependence and physical comorbidity: Increased prevalence but reduced relevance of individual comorbidities for hospital-based mortality during a 12.5-year observation period in general hospital admissions in urban North-West England.

    Science.gov (United States)

    Schoepf, D; Heun, R

    2015-06-01

    Alcohol dependence (AD) is associated with an increase in physical comorbidities. The effects of these diseases on general hospital-based mortality are unclear. Consequently, we conducted a mortality study in which we investigated if the burden of physical comorbidities and their relevance on general hospital-based mortality differs between individuals with and without AD during a 12.5-year observation period in general hospital admissions. During 1 January 2000 and 30 June 2012, 23,371 individuals with AD were admitted at least once to seven General Manchester Hospitals. Their physical comorbidities with a prevalence≥1% were compared to those of 233,710 randomly selected hospital controls, group-matched for age and gender (regardless of primary admission diagnosis or specialized treatments). Physical comorbidities that increased the risk of hospital-based mortality (but not outside of the hospital) during the observation period were identified using multiple logistic regression analyses. Hospital-based mortality rates were 20.4% in the AD sample and 8.3% in the control sample. Individuals with AD compared to controls had a higher burden of physical comorbidities, i.e. alcoholic liver and pancreatic diseases, diseases of the conducting airways, neurological and circulatory diseases, diseases of the upper gastrointestinal tract, renal diseases, cellulitis, iron deficiency anemia, fracture neck of femur, and peripheral vascular disease. In contrast, coronary heart related diseases, risk factors of cardiovascular disease, diverticular disease and cataracts were less frequent in individuals with AD than in controls. Thirty-two individual physical comorbidities contributed to the prediction of hospital-based mortality in univariate analyses in the AD sample; alcoholic liver disease (33.7%), hypertension (16.9%), chronic obstructive pulmonary disease (14.1%), and pneumonia (13.3%) were the most frequent diagnoses in deceased individuals with AD. Multiple forward

  11. Soil-biological, soil-chemical and soil-physical parameters along a pollutant gradient on grassland sites in the vicinity o Brixlegg (Tyrol) - a pilot project

    International Nuclear Information System (INIS)

    Pohla, H.; Palzenberger, M.; Krassnigg, F.; Kandeler, E.; Schwarz, S.; Kasperowski, E.

    1992-01-01

    It was the main aim of this pilot project to check the indicator value of soil organisms by means of distinct pollutant gradients - heavy metals, organic compounds (PCB, dioxins) -. On the basis of available results (1/2/3/), 4 grassland sites at increasing distances from a local emission source (copper production from scrap metal) were selected. Physical and chemical analyses as well as the quantification of habitat structures were used for the characterization of the sites. The following analyses were carried out accompanyingly: The performances of soil microorganisms under pollutant load, the accumulation of pollutants, and the structures of plants and animal communities (macro, meso and microfauna). The investigation area and the examined parameters are introduced, as well as first result on soil chemistry and enzymatics as well as for the accumulation of heavy metals in an earthworm species are introduced. (orig.) [de

  12. Energy Cost and Gait Efficiency of Below-Knee Amputee and Normal Subject with Similar Physical Parameters & Quality of Life: A Comparative Case Study

    Directory of Open Access Journals (Sweden)

    Durbadal Biswas

    2010-10-01

    Full Text Available The study focused on the comparative analysis of energy cost and gait efficiency between a below knee (BK amputee and a reference subject (without amputation. It also attempted to indicate the specific feature responsible for a controlled gait with optimum energy cost for BK amputees. Selection criteria of the subjects were similar physical parameters and quality of life studied with WHOQOL-100 quality of life assessment. A Cosmed® k4 b2 Respiratory Analyzer system was used for the measurement of Oxygen Uptake (VO2, Energy Expenditure per minute (EE and Heart Rate (HR. Gait efficiency (p < 0.0002 was found higher for BK amputee than normal subject. The therapeutic activities and mainly walking rhythm contributed to improve the mobility & balance. This ensures the optimum time & co-ordination of movements and hence improves the gait efficiency for the BK amputee. Comparison with control group was performed to validate the data.

  13. Application of the probe Horiba U-23 in the analysis of physical-chemical parameters of groundwater influences on the Osamu Utsumi uranium mine in Caldas-MG

    International Nuclear Information System (INIS)

    Moreira, Flavio H.S.; Alberti, Heber L.C.; Silva, Nivaldo C.

    2013-01-01

    This study presents data on the analysis of physical-chemical parameters of groundwater in the uranium mine Osamu Utsumi, belonging to the Industrias Nucleares do Brasil - INB, in the municipality of Caldas. This work is part of the team responsible for the evaluation of Plano de Recuperacao de Areas Degradadas (PRAD), team consists of researchers from Laboratorio de Pocos de Caldas - LAPOC and of the Centro de Desenvolvimento Tecnologico Nuclear - CDTN, units of the Comissao Nacional de Energia Nuclear - CNEN. Sampling was carried out in eleven wells in the 'bota-fora 4' area and digs mine. Analyses of groundwater quality were performed using the multiparameter probe Horiba U23, recent acquisition of LAPOC. The results characterize the groundwater of ten wells monitored as acidic and with a high electrical conductivity, due to the impacts caused by drainage Mining Acid (DAM)

  14. PHYSICS

    CERN Multimedia

    V.Ciulli

    2011-01-01

    The main programme of the Physics Week held between 16th and 20th May was a series of topology-oriented workshops on di-leptons, di-photons, inclusive W, and all-hadronic final states. The goal of these workshops was to reach a common understanding for the set of objects (ID, cleaning...), the handling of pile-up, calibration, efficiency and purity determination, as well as to revisit critical common issues such as the trigger. Di-lepton workshop Most analysis groups use a di-lepton trigger or a combination of single and di-lepton triggers in 2011. Some groups need to collect leptons with as low PT as possible with strong isolation and identification requirements as for Higgs into WW at low mass, others with intermediate PT values as in Drell-Yan studies, or high PT as in the Exotica group. Electron and muon reconstruction, identification and isolation, was extensively described in the workshop. For electrons, VBTF selection cuts for low PT and HEEP cuts for high PT were discussed, as well as more complex d...

  15. Nanoemulsions produced with varied type of emulsifier and oil content: An influence of formulation and process parameters on the characteristics and physical stability

    Directory of Open Access Journals (Sweden)

    Đorđević Sanela M.

    2013-01-01

    Full Text Available The aim of the present study was to prepare oil-in-water nanoemulsions stabilized with a novel natural alkyl polyglucoside surfactant and to compare them with corresponding lecithin/polysorbate 80 - based nanoemulsions in terms of physicochemical properties and physical stability. Nanoemulsions were prepared by high pressure homogenization, using 20, 30 and 40% (w/w medium chain triglyceride as oil phase, and 4, 6 and 8% (w/w lecithin/polysorbate 80 mixture (1/1 or caprylyl/capryl glucoside as emulsifiers. The influence of emulsifier type, emulsifier concentration and oil content was investigated with respect to changes in particle size, particle size distribution, surface charge and physical stability. The influence of production parameters (number of homogenization cycles, type of homogenization process, homogenization pressure on particle size was also investigated. Analysis was performed by photon correlation spectroscopy, laser diffraction, zeta potential, pH and electrical conductivity measurements. All formulations produced revealed a small droplet size ranging from 147 to 228 nm and a very narrow size distribution (polydispersity index range 0,072-0,124. Zeta potentials were about -20 mV and -50 mV for nanoemulsions stabilized with lecithin/polysorbate 80 and caprylyl/capryl glucoside, respectively. The results obtained during the stability studies (6 months at 25°C and 1 month at 40°C indicated that nanoemulsion stability was influenced by their composition. Acquired results also suggested the most appropriate production parameters: 9 homogenization cycles, homogenization pressure of 500 bar and discontinuous process of homogenization.

  16. Parameters of DEMO DN and JET DN

    International Nuclear Information System (INIS)

    Anon.

    1987-01-01

    The paper is an appendix to a study of the reactor relevance of the NET design concept. The latter study examines whether the technologies and design principles proposed for NET can be directly extrapolated to a demonstration (DEMO) reactor. The appendix presents the parameters of the DEMO and NET under the topic headings: power, geometry, plasma, toroidal and poloidal magnetic field coils, first wall engineering, divertor physics, divertor engineering, and blanket. (U.K.)

  17. It's the parameters, stupid! Moving beyond multi-model and multi-physics approaches to characterize and reduce predictive uncertainty in process-based hydrological models

    Science.gov (United States)

    Clark, Martyn; Samaniego, Luis; Freer, Jim

    2014-05-01

    Multi-model and multi-physics approaches are a popular tool in environmental modelling, with many studies focusing on optimally combining output from multiple model simulations to reduce predictive errors and better characterize predictive uncertainty. However, a careful and systematic analysis of different hydrological models reveals that individual models are simply small permutations of a master modeling template, and inter-model differences are overwhelmed by uncertainty in the choice of the parameter values in the model equations. Furthermore, inter-model differences do not explicitly represent the uncertainty in modeling a given process, leading to many situations where different models provide the wrong results for the same reasons. In other cases, the available morphological data does not support the very fine spatial discretization of the landscape that typifies many modern applications of process-based models. To make the uncertainty characterization problem worse, the uncertain parameter values in process-based models are often fixed (hard-coded), and the models lack the agility necessary to represent the tremendous heterogeneity in natural systems. This presentation summarizes results from a systematic analysis of uncertainty in process-based hydrological models, where we explicitly analyze the myriad of subjective decisions made throughout both the model development and parameter estimation process. Results show that much of the uncertainty is aleatory in nature - given a "complete" representation of dominant hydrologic processes, uncertainty in process parameterizations can be represented using an ensemble of model parameters. Epistemic uncertainty associated with process interactions and scaling behavior is still important, and these uncertainties can be represented using an ensemble of different spatial configurations. Finally, uncertainty in forcing data can be represented using ensemble methods for spatial meteorological analysis. Our systematic

  18. Deep learning relevance

    DEFF Research Database (Denmark)

    Lioma, Christina; Larsen, Birger; Petersen, Casper

    2016-01-01

    train a Recurrent Neural Network (RNN) on existing relevant information to that query. We then use the RNN to "deep learn" a single, synthetic, and we assume, relevant document for that query. We design a crowdsourcing experiment to assess how relevant the "deep learned" document is, compared...... to existing relevant documents. Users are shown a query and four wordclouds (of three existing relevant documents and our deep learned synthetic document). The synthetic document is ranked on average most relevant of all....

  19. Effects of rainfalls variability and physical-chemical parameters on enteroviruses in sewage and lagoon in Yopougon, Côte d'Ivoire

    Science.gov (United States)

    Momou, Kouassi Julien; Akoua-Koffi, Chantal; Traoré, Karim Sory; Akré, Djako Sosthène; Dosso, Mireille

    2017-07-01

    The aim of this study was to assess the variability of the content of nutrients, oxidizable organic and particulate matters in raw sewage and the lagoon on the effect of rainfall. Then evaluate the impact of these changes in the concentration of enteroviruses (EVs) in waters. The sewage samples were collected at nine sampling points along the channel, which flows, into a tropical lagoon in Yopougon. Physical-chemical parameters (5-day Biochemical Oxygen Demand, Chemical Oxygen Demand, Suspended Particulate Matter, Total Phosphorus, Orthophosphate, Total Kjeldahl Nitrogen and Nitrate) as well as the concentration of EV in these waters were determined. The average numbers of EV isolated from the outlet of the channel were 9.06 × 104 PFU 100 ml-1. Consequently, EV was present in 55.55 and 33.33 % of the samples in the 2 brackish lagoon collection sites. The effect of rainfall on viral load at the both sewage and brackish lagoon environments is significant correlate (two-way ANOVA, P < 0.05). Furthermore, in lagoon environment, nutrients (Orthophosphate, Total Phosphorus), 5-day Biochemical Oxygen Demand, Chemical Oxygen Demand and Suspended Particulate Matter were significant correlated with EVs loads ( P < 0.05 by Pearson test). The overall results highlight the problem of sewage discharge into the lagoon and correlation between viral loads and water quality parameters in sewage and lagoon.

  20. Case studies on the physical-chemical parameters' variation during three different purification approaches destined to treat wastewaters from food industry.

    Science.gov (United States)

    Ghimpusan, Marieta; Nechifor, Gheorghe; Nechifor, Aurelia-Cristina; Dima, Stefan-Ovidiu; Passeri, Piero

    2017-12-01

    The paper presents a set of three interconnected case studies on the depuration of food processing wastewaters by using aeration & ozonation and two types of hollow-fiber membrane bioreactor (MBR) approaches. A secondary and more extensive objective derived from the first one is to draw a clearer, broader frame on the variation of physical-chemical parameters during the purification of wastewaters from food industry through different operating modes with the aim of improving the management of water purification process. Chemical oxygen demand (COD), pH, mixed liquor suspended solids (MLSS), total nitrogen, specific nitrogen (NH 4 + , NO 2 - , NO 3 - ) total phosphorous, and total surfactants were the measured parameters, and their influence was discussed in order to establish the best operating mode to achieve the purification performances. The integrated air-ozone aeration process applied in the second operating mode lead to a COD decrease by up to 90%, compared to only 75% obtained in a conventional biological activated sludge process. The combined purification process of MBR and ozonation produced an additional COD decrease of 10-15%, and made the Total Surfactants values to comply to the specific legislation. Copyright © 2016 Elsevier Ltd. All rights reserved.

  1. Effects of major parameters of nanoparticles on their physical and chemical properties and recent application of nanodrug delivery system in targeted chemotherapy.

    Science.gov (United States)

    Zhang, Jing; Tang, Hua; Liu, Zefa; Chen, Baoan

    2017-01-01

    Chemotherapy is still one of the main cancer therapy treatments, but the curative effect of chemotherapy is relatively low, as such the development of a new cancer treatment is highly desirable. The gradual maturation of nanotechnology provides an innovative perspective not only for cancer therapy but also for many other applications. There are a diverse variety of nanoparticles available, and choosing the appropriate carriers according to the demand is the key issue. The performance of nanoparticles is affected by many parameters, mainly size, shape, surface charge, and toxicity. Using nanoparticles as the carriers to realize passive targeting and active targeting can improve the efficacy of chemotherapy drugs significantly, reduce the mortality rate of cancer patients, and improve the quality of life of patients. In recent years, there has been extensive research on nanocarriers. In this review, the effects of several major parameters of nanoparticles on their physical and chemical properties are reviewed, and then the recent progress in the application of several commonly used nanoparticles is presented.

  2. Summary of results for the SNEAK-9 series of critical experiments and conclusions for the accuracy of predicted physics parameters of the SNR-300

    International Nuclear Information System (INIS)

    Helm, F.

    1978-08-01

    In a series of critical assembles in SNEAK physics parameters of interest for the prototype fast reactor SNR-300 were investigated and compared to the results of calculations. Since a complete mock-up of the SNR-300 was not possible with the material supply available the measurements were performed in three different assemblies, each being adapted to the investigation of a particular set of problems. Work was concentrated on the following quantities: criticality, breeding ratio, Na-void effect, control rod worths and power distribution. The calculation were performed using the diffusion and transport methods available at KFK and as a data basis the KFKINER cross section set. Detailed descriptions of the assemblies, the majority of the results and extensive discussions of the experimental and calculational methods used can be found in separate KFK reports about each assembly which were already published. This report contains a summary of the results for each quantity investigated including a basic account of the methods used, and an evaluation of the significance of these data for the prediction of parameters of the SNR-300. (orig.) 891 RW [de

  3. Time Course of Improvement of Metabolic Parameters after a 12 Week Physical Exercise Programme in Patients with Type 2 Diabetes: The Influence of Gender in a Nigerian Population

    Directory of Open Access Journals (Sweden)

    A. F. Adeniyi

    2013-01-01

    Full Text Available Gender is a major determinant of the outcomes of many health interventions. This study documents the order of significant improvements in metabolic parameters of patients with type 2 diabetes mellitus (T2DM having metabolic syndrome within 12 weeks of physical exercise programmes. Twenty-nine patients, mean age 49.6 ± 3.7 years, presenting with high fasting plasma glucose, high triglycerides, hypertension, and high waist circumference undertook a thrice weekly aerobic and endurance exercise programme in addition to their drugs and diet. Variables were assessed at baseline and end of every two weeks for twelve weeks. Compared with baseline, significant improvement (P<0.05 in the metabolic parameters occurred in this order for the male participants: fasting glucose (2nd week, triglycerides and waist circumference (4th week, and systolic blood pressure (12th week. For the female participants, it was fasting glucose (4th week, triglycerides (6th week, and waist circumference (10th week. Regardless of the gender, fasting glucose was the first to improve significantly, followed by triglycerides. Hypertension did not improve significantly at all in the female participants as they may require more than twelve weeks of therapeutic exercise for any significant improvement in hypertension.

  4. Sheep milk yogurt from a short food supply chain: study of the microbiological, chemico-physical and organoleptic parameters in relation to shelf-life

    Directory of Open Access Journals (Sweden)

    Nicla Marri

    2014-08-01

    Full Text Available Aim of this work was to analyse some microbiological, chemico-physical and organoleptic parameters of sheep milk yogurt during and after its declared shelf-life. Five samples of a sheep’s milk yogurt of the same lot, collected from a short supply chain ovine dairy farm of the Roman province, were analysed. Declared shelf-life of the product was 30 days. The products were examined at 2, 14, 30, 35 and 40 days from the production date, performing the following microbiological analyses: enumeration of i colony-forming units characteristic of the yogurt, ii Enterobacteriaceae, iii yeasts and/or moulds at 25°C. Microbiological identification was performed by miniature biochemical tests and for the lactic acid bacteria also by PCR. At every test interval, evaluation of organoleptic parameters and pH was also performed. The analysed product maintained an almost constant amount of lactic acid bacteria until the end of the declared shelf-life. Concerning lactic acid bacteria, a 100% concordance of the results observed by using biochemical identification methods and PCR assays was obtained. After 14 days from the production, the presence of yeasts (Candida famata was revealed, while the presence of moulds was detected after 30 days. Ralstonia picketii, an environmental microorganism, was also isolated. The results obtained in this study indicate that yogurt spoilage is mainly due to the growth of specific microorganisms of spoilage, such as yeasts and moulds.

  5. Effects of red wine, grape juice and resveratrol consumption on bone parameters of Wistar rats submitted to high-fat diet and physical training.

    Science.gov (United States)

    Cardoso, Letícia Monteiro da Fonseca; Pimenta, Nina Da Matta Alvarez; Fiochi, Raiza Da Silva Ferreira; Mota, Bruna Ferreira Mota; Monnerat, Juliana Arruda de Souza; Teixeira, Cristiane Correia; Ramalho, Renata Beatriz Da Rocha; Maldronato, Isabelle Waleska; Dolisnky, Manuela; Boaventura, Gilson Teles; Blondet, Vilma; Barroso, Sergio Girão; Costa, Carlos Alberto Soares da; Rocha, Gabrielle De Souza

    2017-10-27

    intake of diets with high saturated fat may produce deleterious effects on bone mineralization. Lifestyle changes help reduce the bone loss observed in osteoporosis. Resveratrol, present in grape juice and red wine, has osteogenic and osteoinductive effects, being potentially beneficial for bone health. to evaluate the effects of red grape juice, red wine and resveratrol consumption on bone parameters in Wistar rats submitted to a high-fat diet and physical training. female Wistar rats, with 90 days of age, were divided into five groups and followed up for 60 days: a) control group; b) high-fat group; c) grape juice group; d) red wine group; and e) resveratrol group. The different groups of animals performed a physical training protocol. Animal's weight and consumption were monitored weekly. After 60 days, femoral dimensions, bone mineral density (BMD) and bone mineral content (BMC) were evaluated. there was no difference in body mass; however, all groups consuming the high-fat diet had higher consumption (p diet.

  6. Partial replacement of sodium chloride by potassium chloride in the formulation of French bread: effect on the physical, physicochemical and sensory parameters

    Directory of Open Access Journals (Sweden)

    Thaisa Abrantes Souza GUSMÃO

    Full Text Available Abstract This study aimed to the replacement of sodium chloride (0.4 to 1.6% by potassium chloride (0.2 to 0.8% in French bread formulation and evaluate its effect on physical, physicochemical and sensory characteristics. For the preparation of bread was used a factorial design 22 with 4 factorial points and 3 central points, totaling 7 experiments. The physical and physicochemical parameters analyzed were: specific volume, moisture, color of the peel and crumb, pH, acidity and texture profile, sodium and potassium. The sensory evaluation of bread was performed using quantitative descriptive analysis, with 12 sensory terminologies. Response variables of salty taste and sensory chewiness generated statistically significant models. The results indicated optimal ranges of 0.2 to 0.5% of potassium chloride, and 1.0 to 1.6% for sodium chloride, and proved the technical feasibility of producing French bread with 50% salt reduction (174.09 mg.50 g–1, compared to a standard formulation of 1.88% (306.5 mg.50g-1 salt, corresponding to the prognosis recommended by the National Health Surveillance Agency.

  7. Experimental determination of some equilibrium parameter of Damavand tokamak by magnetic probe measurements for representing a physical model for plasma vertical movement.

    Science.gov (United States)

    Farahani, N Darestani; Davani, F Abbasi

    2015-10-01

    This investigation is about plasma modeling for the control of vertical instabilities in Damavand tokamak. This model is based on online magnetic measurement. The algebraic equation defining the vertical position in this model is based on instantaneous force-balance. Two parameters in this equation, including decay index, n, and lambda, Λ, have been considered as functions of time-varying poloidal field coil currents and plasma current. Then these functions have been used in a code generated for modeling the open loop response of plasma. The main restriction of the suitability analysis of the model is that the experiments always have to be performed in the presence of a control loop for stabilizing vertical position. As a result, open loop response of the system has been identified from closed loop experimental data by nonlinear neural network identification method. The results of comparison of physical model with identified open loop response from closed loop experiments show root mean square error percentage less than 10%. The results are satisfying that the physical model is useful as a Damavand tokamak vertical movement simulator.

  8. Dating methods and their relevance in physics

    International Nuclear Information System (INIS)

    Schneider, H.

    1981-01-01

    The article describes some of the most important radiometric clocks. It is pointed out how much the chronological interpretation of isotopic ratios depends on preconceived models about origin and history of investigated minerals. A number of physico-chemical effects are discussed, which give rise to fictitious datings. The possibility is considered that all the radiometric ages used for establishing the geologic time scale might be due to such effects. The history and foundations of the latter are reviewed, and the possibility of a wrong decision is mentioned. Several results from fossil objects indicate very young ages. The usual treatment of anomalous results is criticised. Long-time clocks fails to reproduce documented young ages. It is suggested that in the age interpretation of isotopic ratios much younger than conventional ages be also taken into consideration. The importance of directly dating fossils is stressed. (orig./HP) [de

  9. Physical Uncertainty Bounds (PUB)

    Energy Technology Data Exchange (ETDEWEB)

    Vaughan, Diane Elizabeth [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Preston, Dean L. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2015-03-19

    This paper introduces and motivates the need for a new methodology for determining upper bounds on the uncertainties in simulations of engineered systems due to limited fidelity in the composite continuum-level physics models needed to simulate the systems. We show that traditional uncertainty quantification methods provide, at best, a lower bound on this uncertainty. We propose to obtain bounds on the simulation uncertainties by first determining bounds on the physical quantities or processes relevant to system performance. By bounding these physics processes, as opposed to carrying out statistical analyses of the parameter sets of specific physics models or simply switching out the available physics models, one can obtain upper bounds on the uncertainties in simulated quantities of interest.

  10. Typical parameters of the plasma chemical similarity in non-isothermal reactive plasmas

    International Nuclear Information System (INIS)

    Gundermann, S.; Jacobs, H.; Miethke, F.; Rutsher, A.; Wagner, H.E.

    1996-01-01

    The substance of physical similarity principles is contained in parameters which govern the comparison of different realizations of a model device. Because similarity parameters for non-isothermal plasma chemical reactors are unknown to a great extent, an analysis of relevant equations is given together with some experimental results. Modelling of the reactor and experimental results for the ozone synthesis are presented

  11. Laser thermal effect on silicon nitride ceramic based on thermo-chemical reaction with temperature-dependent thermo-physical parameters

    International Nuclear Information System (INIS)

    Pan, A.F.; Wang, W.J.; Mei, X.S.; Wang, K.D.; Zhao, W.Q.; Li, T.Q.

    2016-01-01

    Highlights: • A two-dimensional thermo-chemical reaction model is creatively built. • Thermal conductivity and heat capacity of β-Si_3N_4 are computed accurately. • The appropriate thermo-chemical reaction rate is fitted and reaction element length is set to assure the constringency. • The deepest ablated position was not the center of the ablated area due to plasma absorption. • The simulation results demonstrate the thermo-chemical process cant be simplified to be physical phase transition. - Abstract: In this study, a two-dimensional thermo-chemical reaction model with temperature-dependent thermo-physical parameters on Si_3N_4 with 10 ns laser was developed to investigate the ablated size, volume and surface morphology after single pulse. For model parameters, thermal conductivity and heat capacity of β-Si_3N_4 were obtained from first-principles calculations. Thermal-chemical reaction rate was fitted by collision theory, and then, reaction element length was deduced using the relationship between reaction rate and temperature distribution. Furthermore, plasma absorption related to energy loss was approximated as a function of electron concentration in Si_3N_4. It turned out that theoretical ablated volume and radius increased and then remained constant with increasing laser energy, and the maximum ablated depth was not in the center of the ablated zone. Moreover, the surface maximum temperature of Si_3N_4 was verified to be above 3000 K within pulse duration, and it was much higher than its thermal decomposition temperature of 1800 K, which indicated that Si_3N_4 was not ablated directly above the thermal decomposition temperature. Meanwhile, the single pulse ablation of Si_3N_4 was performed at different powers using a TEM_0_0 10 ns pulse Nd:YAG laser to validate the model. The model showed a satisfactory consistence between the experimental data and numerical predictions, presenting a new modeling technology that may significantly increase the

  12. Objectively measured physical activity levels and sedentary time in 7–9-year-old Estonian schoolchildren: independent associations with body composition parameters

    Directory of Open Access Journals (Sweden)

    Eva-Maria Riso

    2016-04-01

    Full Text Available Abstract Background Sufficient daily physical activity (PA is necessary for physical, social and mental health benefits during growth. Most of the available data on children is based on subjective reports, while only limited data on objective PA and sedentary levels is available for primary school children. Increased PA is also an important health indicator of body composition parameters, especially body adiposity indices. The aim of the present study was to determine objectively the amount of daily PA levels at different intensities and sedentary time in normal-weight (NW and overweight (OW 7–9-year-old boys and girls, and to find associations between objectively measured PA levels and sedentary time with different body composition values. Methods Two hundred and seventy eight (142 boys and 136 girls primary school children aged 7.9 ± 0.7 years participated in this study. Objective PA intensity and sedentary levels were measured over 7 days by accelerometry. Indices of total fat mass (body fat %, sum of skinfolds, fat distribution (waist-to-height ratio and muscular component (fat free mass [FFM] were calculated from measured anthropometric parameters. Results There were no differences (p > 0.05 in PA intensity levels and sedentary time between boys and girls as well as between NW and OW children. About 11 % of children met the current guidelines of at least 60 min per day of moderate-to-vigorous PA (MVPA. Sedentary time was positively and negatively associated (p < 0.05 with all body fat and FFM values, respectively. Moderate and vigorous PA along with MVPA were negatively and positively associated (p < 0.05 with all body fat and FFM indices, respectively. Conclusions The results of present study showed that about 11 % of primary school children were engaged in PA of at least 60 min of MVPA daily. While MVPA is negatively associated with fat mass indices and positively associated with FFM regardless of different

  13. Correlation of magnesium intake with metabolic parameters, depression and physical activity in elderly type 2 diabetes patients: a cross-sectional study

    Directory of Open Access Journals (Sweden)

    Huang Jui-Hua

    2012-06-01

    Full Text Available Abstract Background Type 2 diabetes mellitus is a major global public health problem in the worldwide and is increasing in aging populations. Magnesium intake may be one of the most important factors for diabetes prevention and management. Low magnesium intake may exacerbate metabolic abnormalities. In this study, the relationships of magnesium intake with metabolic parameters, depression and physical activity in elderly patients with type 2 diabetes were investigated. Methods This cross-sectional study involved 210 type 2 diabetes patients aged 65 years and above. Participants were interviewed to obtain information on lifestyle and 24-hour dietary recall. Assessment of depression was based on DSM-IV criteria. Clinical variables measured included anthropometric measurements, blood pressure, and biochemical determinations of blood and urine samples. Linear regression was applied to determine the relationships of magnesium intake with nutritional variables and metabolic parameters. Results Among all patients, 88.6% had magnesium intake which was less than the dietary reference intake, and 37.1% had hypomagnesaemia. Metabolic syndromes and depression were associated with lower magnesium intake (p  0.05. A positive relationship was found between magnesium intake and HDL-cholesterol (p = 0.005. Magnesium intake was inversely correlated with triglyceride, waist circumference, body fat percent and body mass index (p p for trend = 0005. Waist circumference, body fat percentage, and body mass index were significantly lower with increase quartile of magnesium intake (p for trend p for trend  Conclusions The majority of elderly type 2 diabetes who have